The geometric clutch at 20: stripping gears or gaining traction?

Science.gov (United States)

Lindemann, Charles B; Lesich, Kathleen A

2015-08-01

It has been 20 years since the geometric clutch (GC) hypothesis was first proposed. The core principle of the GC mechanism is fairly simple. When the axoneme of a eukaryotic flagellum is bent, mechanical stress generates forces transverse to the outer doublets (t-forces). These t-forces can push doublets closer together or pry them apart. The GC hypothesis asserts that changes in the inter-doublet spacing caused by t-forces are responsible for the activation and deactivation of the dynein motors, that creates the beat cycle. A series of computer models utilizing the clutch mechanism has shown that it can simulate ciliary and flagellar beating. The objective of the present review is to assess where things stand with the GC hypothesis in the clarifying light of new information. There is considerable new evidence to support the hypothesis. However, it is also clear that it is necessary to modify some of the original conceptions of the hypothesis so that it can be consistent with the results of recent experimental and ultrastructural studies. In particular, dynein deactivation by t-forces must be able to occur with dyneins that remain attached to the B-subtubule of the adjacent doublet. © 2015 Society for Reproduction and Fertility.

Design and control of electromagnetic clutch actuation system for automated manual transmission

Science.gov (United States)

Ranjan, Ashish; Prasanth, S.; Cherian, Fenin; Baskar, P.

2017-11-01

There is a growing interest towards Automatic Transmission in India as it provides better comfort and drivability. But the high cost of this system is limiting itself to be successful in the Indian markets. Due to this, Automated Manual Transmission (AMT) is considered which provides a better solution towards automation as it enhances the drivability and fuel consumption characteristics of a manual transmission at lower costs. However, torque lag and comfort are major issues with AMT which can be addressed by reducing the shift time. In this paper we describe an Electromagnetic Linear Clutch Actuator as a replacement to current electrohydraulic and electromechanical actuator. A control system for the actuator is presented and a clutch engagement strategy is also implemented which reduces the engagement time to 0.78 seconds while reducing jerk and torque lag. The actuator and control system is simulated on a MATLAB Simulink and agreeable results have been obtained.

Dry Friction Clutch Disc of an Automobile under Transient Thermal Load: A Comparison of Friction Lining Materials

Directory of Open Access Journals (Sweden)

Ali Anosh

2017-01-01

Full Text Available This paper shows the comparison of temperatures produced in a dry friction clutch disc with different materials during a single engagement to assist in clutch plate design and analysis. A study of usage of different materials for friction lining of clutch disc is required, which will provide improved performance and enhanced life. This investigation is modelled mathematically and solved numerically using finite element method. ANSYS® 15.0 is a dedicated finite element package used for determining the temperature distribution across a clutch disc. In the present work, an investigation of a conventionally used harmful friction lining material asbestos is compared with carbon-carbon composite, S2-glass fibre and aluminium metal matrix composite. The transient thermal analysis of a clutch disc with different materials is performed and the temperature distribution on the clutch system is compared. Simulation results indicate that all the values of the temperature obtained from the analysis of aluminium metal matrix are less than those of asbestos based lining material, therefore clutch disc made up of aluminium metal matrix composite will assure the extended service life and the longer stability due to the fact that the temperature responsible for the wear and tear has been reduced. Furthermore, the slipping time is also considered in this investigation.

Security force-adversary engagement simulation

International Nuclear Information System (INIS)

Bennett, H.A.

1975-01-01

A dynamic simulation of a security force-adversary engagement has been developed to obtain a better understanding of the complexities involved in security systems. Factors affecting engagement outcomes were identified and interrelated to represent an ambush of an escorted nuclear fuel truck convoy by an adversary group. Other forms of engagement such as assault and skirmish also can be simulated through suitable parameter changes. The dynamic model can provide a relative evaluation of changes in security force levels, equipment, training, and tactics. Continued application and subsequent refinements of the model are expected to augment the understanding of component interaction within a guard-based security system

Magnetic particle clutch controls servo system

Science.gov (United States)

Fow, P. B.

1973-01-01

Magnetic clutches provide alternative means of driving low-power rate or positioning servo systems. They may be used over wide variety of input speed ranges and weigh comparatively little. Power drain is good with overall motor/clutch efficiency greater than 50 percent, and gain of clutch is close to linear, following hysteresis curve of core and rotor material.

Camouflage and Clutch Survival in Plovers and Terns

Science.gov (United States)

Stoddard, Mary Caswell; Kupán, Krisztina; Eyster, Harold N.; Rojas-Abreu, Wendoly; Cruz-López, Medardo; Serrano-Meneses, Martín Alejandro; Küpper, Clemens

2016-09-01

Animals achieve camouflage through a variety of mechanisms, of which background matching and disruptive coloration are likely the most common. Although many studies have investigated camouflage mechanisms using artificial stimuli and in lab experiments, less work has addressed camouflage in the wild. Here we examine egg camouflage in clutches laid by ground-nesting Snowy Plovers Charadrius nivosus and Least Terns Sternula antillarum breeding in mixed aggregations at Bahía de Ceuta, Sinaloa, Mexico. We obtained digital images of clutches laid by both species. We then calibrated the images and used custom computer software and edge detection algorithms to quantify measures related to three potential camouflage mechanisms: pattern complexity matching, disruptive effects and background color matching. Based on our image analyses, Snowy Plover clutches, in general, appeared to be more camouflaged than Least Tern clutches. Snowy Plover clutches also survived better than Least Tern clutches. Unexpectedly, variation in clutch survival was not explained by any measure of egg camouflage in either species. We conclude that measures of egg camouflage are poor predictors of clutch survival in this population. The behavior of the incubating parents may also affect clutch predation. Determining the significance of egg camouflage requires further testing using visual models and behavioral experiments.

Engagement characteristics of a friction pad for commercial vehicle ...

Indian Academy of Sciences (India)

Clutch; friction; wear; failure analysis. 1. ... There are two main types of clutches: Wet ... material is followed by study on engagement characteristics and failure analysis of .... qualitative indication for assessment of tribological behaviour of ...

Elevational gradient in clutch size of Red-faced Warblers

Science.gov (United States)

Dillon, Kristen G.; Conway, Courtney J.

2015-01-01

Our understanding of life history evolution has benefited from debates regarding the underlying causes, and geographic ubiquity, of spatial patterns in avian clutch sizes. Past studies have revealed that birds lay smaller clutch sizes at higher elevation. However, in most previous studies, investigators have failed to adequately control for elevational differences in breeding phenology. To better understand the elevational gradient in avian clutch size, we need to know how clutch size changes across the entire elevational breeding range of a species (i.e., the shape of the relationship between elevation and clutch size), and whether the elevational gradient in clutch size is merely an artifact of elevational gradients in breeding phenology or breeding season length. We examined the relationship between breeding elevation and clutch size of Red-faced Warblers (Cardellina rubrifrons) along a 1000-m elevational gradient in Arizona. Our objectives were to determine how clutch size changed with elevation, and if the relationship between clutch size and elevation merely reflected elevational changes in breeding season length or phenology. The proportion of 5-egg clutches decreased and the proportion of 3- and 4-egg clutches increased non-linearly with increasing elevation, even after controlling for the elevational gradient in nest initiation date. Thus, average clutch size declined across the elevational breeding range of Red-faced Warblers, but this decline was not due to elevational variation in breeding phenology. Timing of breeding changed, but the duration of the breeding season did not change appreciably across the elevational gradient. Hence, elevational differences in breeding season length or breeding phenology cannot explain why Red-faced Warblers (and perhaps other birds) breeding at higher elevations have smaller clutches.

Effect of ATF on frictional property of wet-type clutch; Shisshiki crutch (hasshin clutch) no masatsu tokusei ni oyobosu ATF no eikyosei

Energy Technology Data Exchange (ETDEWEB)

Yoshida, J; Nagashima, T; Yamane, T; Kawauchi, s; Hirao, Y [Honda R and D Co. Ltd., Tokyo (Japan)

1997-10-01

As a starting device for continuously variable transmission, wet-type multiple disc clutch installed to the driven side (Starting clutch system) is suitable system. Starting clutch system is feared to occur the judder phenomenon, because it is used at low slipping velocity like a lock up clutch. In this report, we studied to prevent the judder phenomenon about the effect of automatic transmission fluid on frictional property of the wet-type clutch. 6 refs., 7 figs., 2 tabs.

Clutch size declines with elevation in tropical birds

Science.gov (United States)

Boyce, A.J.; Freeman, Benjamin G.; Mitchell, Adam E.; Martin, Thomas E.

2015-01-01

Clutch size commonly decreases with increasing elevation among temperate-zone and subtropical songbird species. Tropical songbirds typically lay small clutches, thus the ability to evolve even smaller clutch sizes at higher elevations is unclear and untested. We conducted a comparative phylogenetic analysis using data gathered from the literature to test whether clutch size varied with elevation among forest passerines from three tropical biogeographic regions—the Venezuelan Andes and adjacent lowlands, Malaysian Borneo, and New Guinea. We found a significant negative effect of elevation on variation in clutch size among species. We found the same pattern using field data sampled across elevational gradients in Venezuela and Malaysian Borneo. Field data were not available for New Guinea. Both sets of results demonstrate that tropical montane species across disparate biogeographic realms lay smaller clutches than closely related low-elevation species. The environmental sources of selection underlying this pattern remain uncertain and merit further investigation.

The Evolution of Clutch Size in Hosts of Avian Brood Parasites.

Science.gov (United States)

Medina, Iliana; Langmore, Naomi E; Lanfear, Robert; Kokko, Hanna

2017-11-01

Coevolution with avian brood parasites shapes a range of traits in their hosts, including morphology, behavior, and breeding systems. Here we explore whether brood parasitism is also associated with the evolution of host clutch size. Several studies have proposed that hosts of highly virulent parasites could decrease the costs of parasitism by evolving a smaller clutch size, because hosts with smaller clutches will lose fewer progeny when their clutch is parasitized. We describe a model of the evolution of clutch size, which challenges this logic and shows instead that an increase in clutch size (or no change) should evolve in hosts. We test this prediction using a broad-scale comparative analysis to ask whether there are differences in clutch size within hosts and between hosts and nonhosts. Consistent with our model, this analysis revealed that host species do not have smaller clutches and that hosts that incur larger costs from raising a parasite lay larger clutches. We suggest that brood parasitism might be an influential factor in clutch-size evolution and could potentially select for the evolution of larger clutches in host species.

A magnetorheological clutch for efficient automotive auxiliary device actuation

Directory of Open Access Journals (Sweden)

F. Bucchi

2013-01-01

Full Text Available In this paper the results of a project funded by Regione Toscana aimed at reducing the power absorption of auxiliary devices in vehicles are presented. In particular the design, testing and application of a magnetorheological clutch (MR is proposed, aimed at disengaging the vacuum pump, which draws in air from the power-brake booster chamber, in order to reduce the device power absorption. Several clutch preliminary studies done to choose the clutch geometry and the magnetic field supply are illustrated. The final choice consisted in an MR clutch with permanent magnet, which satisfied size, torque and fail-safe specifications. The clutch characteristics, in terms of torque versus slip, were obtained experimentally for three different clutch prototypes on an ad-hoc developed test bench.As result of a preliminary simulation, a comparison between the power absorption of a current production vacuum pump, an innovative vacuum pump and both vacuum pumps coupled with the MR clutch is presented. The New European Driving Cycle is considered for simulating the vacuum pump operation both in urban and highway driving. Results show that the use of the innovative vacuum pump reduces the device consumption of about 35%, whereas the use of MR clutch coupled with the innovative vacuum pump reduces it up to about 44% in urban driving and 50% in highway driving.

Origin of evolutionary change in avian clutch size.

Science.gov (United States)

Haywood, Sacha

2013-11-01

Why different bird species lay different numbers of eggs is a question that has long been associated with factors external to the organism, that is, factors which operate on inherited variation in clutch size through the action of natural selection. Yet, while external factors are important, the extent of what is evolutionarily possible rests with the mechanisms developed by birds for clutch-size control. Hitherto neglected, these mechanisms generate factors internal to the organism that are central to the origin of evolutionary change. They are related to the fact that a species-specific range of clutch size arises from the differential survival of pre-ovulatory follicles undergoing growth when the signal causing egg laying to end reaches the ovary. Herein, I examine three internal factors that, together with external factors, could impact the evolution of avian clutch size. Each factor acts by changing either the number of pre-ovulatory follicles present in the ovary at the time of follicular disruption or the timing of this event. These changes to clutch size can be explained by the concept of heterochrony. In light of this, the role of phenotypic plasticity and genes determining clutch size is discussed. Finally, to account for the origin of evolutionary change in clutch size, I detail an hypothesis involving a process similar to Waddington's theory of genetic assimilation. © 2013 The Author. Biological Reviews © 2013 Cambridge Philosophical Society.

Clutch frequency affects the offspring size-number trade-off in lizards.

Directory of Open Access Journals (Sweden)

Zheng Wang

2011-01-01

Full Text Available Studies of lizards have shown that offspring size cannot be altered by manipulating clutch size in species with a high clutch frequency. This raises a question of whether clutch frequency has a key role in influencing the offspring size-number trade-off in lizards.To test the hypothesis that females reproducing more frequently are less likely to tradeoff offspring size against offspring number, we applied the follicle ablation technique to female Eremias argus (Lacertidae from Handan (HD and Gonghe (GH, the two populations that differ in clutch frequency. Follicle ablation resulted in enlargement of egg size in GH females, but not in HD females. GH females switched from producing a larger number of smaller eggs in the first clutch to a smaller number of larger eggs in the second clutch; HD females showed a similar pattern of seasonal shifts in egg size, but kept clutch size constant between the first two clutches. Thus, the egg size-number trade-off was evident in GH females, but not in HD females.As HD females (mean  = 3.1 clutches per year reproduce more frequently than do GH females (mean  = 1.6 clutches per year, our data therefore validate the hypothesis tested. Our data also provide an inference that maximization of maternal fitness could be achieved in females by diverting a large enough, rather than a higher-than-usual, fraction of the available energy to individual offspring in a given reproductive episode.

Road deicing salt irreversibly disrupts osmoregulation of salamander egg clutches

International Nuclear Information System (INIS)

Karraker, Nancy E.; Gibbs, James P.

2011-01-01

It has been postulated that road deicing salts are sufficiently diluted by spring rains to ameliorate any physiological impacts to amphibians breeding in wetlands near roads. We tested this conjecture by exposing clutches of the spotted salamander (Ambystoma maculatum) to three chloride concentrations (1 mg/L, 145 mg/L, 945 mg/L) for nine days, then transferred clutches to control water for nine days, and measured change in mass at three-day intervals. We measured mass change because water uptake by clutches reduces risks to embryos associated with freezing, predation, and disease. Clutches in controls sequestered water asymptotically. Those in the moderate concentrations lost 18% mass initially and regained 14% after transfer to control water. Clutches in high concentration lost 33% mass and then lost an additional 8% after transfer. Our results suggest that spring rains do not ameliorate the effects of deicing salts in wetlands with extremely high chloride concentrations. - Road deicing salts irreversibly disrupts osmoregulation of salamander egg clutches.

Road deicing salt irreversibly disrupts osmoregulation of salamander egg clutches

Energy Technology Data Exchange (ETDEWEB)

Karraker, Nancy E., E-mail: karraker@hku.hk [Department of Environmental and Forest Biology, State University of New York, College of Environmental Science and Forestry, Syracuse, NY 13210 (United States); Gibbs, James P [Department of Environmental and Forest Biology, State University of New York, College of Environmental Science and Forestry, Syracuse, NY 13210 (United States)

2011-03-15

It has been postulated that road deicing salts are sufficiently diluted by spring rains to ameliorate any physiological impacts to amphibians breeding in wetlands near roads. We tested this conjecture by exposing clutches of the spotted salamander (Ambystoma maculatum) to three chloride concentrations (1 mg/L, 145 mg/L, 945 mg/L) for nine days, then transferred clutches to control water for nine days, and measured change in mass at three-day intervals. We measured mass change because water uptake by clutches reduces risks to embryos associated with freezing, predation, and disease. Clutches in controls sequestered water asymptotically. Those in the moderate concentrations lost 18% mass initially and regained 14% after transfer to control water. Clutches in high concentration lost 33% mass and then lost an additional 8% after transfer. Our results suggest that spring rains do not ameliorate the effects of deicing salts in wetlands with extremely high chloride concentrations. - Road deicing salts irreversibly disrupts osmoregulation of salamander egg clutches.

Simulation and control of an automotive dry clutch

NARCIS (Netherlands)

Serrarens, A.F.A.; Dassen, M.; Steinbuch, M.

2004-01-01

In this paper the dynamic behavior and control of an automotive dry clutch is analyzed. Thereto, a straight-forward model of the clutch is embedded within a dynamic model of an automotive powertrain comprising an internal combustion engine, drivetrain and wheels moving a vehicle through tire-road

Melatonin delays clutch initiation in a wild songbird

Science.gov (United States)

Greives, Timothy J.; Kingma, Sjouke A.; Beltrami, Giulia; Hau, Michaela

2012-01-01

The hormone melatonin is known to play an important role in regulating many seasonal changes in physiology, morphology and behaviour. In birds, unlike in mammals, melatonin has thus far been thought to play little role in timing seasonal reproductive processes. This view is mainly derived from laboratory experiments on male birds. This study tests whether melatonin is capable of influencing the timing of clutch initiation in wild female songbirds. Free-living female great tits (Parus major) treated with melatonin-filled implants prior to the breeding season initiated their first clutch of the season significantly later than females carrying an empty implant. Melatonin treatment did not affect clutch size. Further, melatonin treatment did not delay the onset of daily activity in the wild nor adversely affect body mass in captivity compared with controls. These data suggest a previously unknown role for this hormone in regulating the timing of clutch initiation in the wild. PMID:22171024

Asbestos exposures of mechanics performing clutch service on motor vehicles.

Science.gov (United States)

Cohen, Howard J; Van Orden, Drew R

2008-03-01

A study was conducted to assess historical asbestos exposures of mechanics performing clutch service on motor vehicles. For most of the 20th century, friction components used in brakes and manual transmission clutches contained approximately 25-60% chrysotile asbestos. Since the late 1960s, asbestos exposure assessment studies conducted on mechanics performing brake service have frequently reported levels below the current OSHA permissible exposure limit (PEL) of 0.1 fiber/cc (flcc). Although there is a robust asbestos exposure data set for mechanics performing brake service, there are almost no data for mechanics removing and replacing clutches in manual transmission vehicles. Personal and area airborne asbestos samples were collected during the removal of asbestos-containing clutches from 15 manual transmissions obtained from salvage facilities by an experienced mechanic. Clutch plates and debris were analyzed for asbestos using EPA and ISO published analytical methods. More than 100 personal and area air samples were collected and analyzed for asbestos fibers using NIOSH methods 7400 and 7402. A separate study involved a telephone survey of 16 automotive mechanics who began work prior to 1975. The mechanics were asked about the duration, frequency, and methods used to perform clutch service. Wear debris in the bell housing surrounding clutches had an average of 0.1% chrysotile asbestos by weight, a value consistent with similar reports of brake debris. Asbestos air sampling data collected averaged 0.047 flcc. Mechanics participating in the telephone survey indicated that clutch service was performed infrequently, the entire clutch assembly was normally replaced, and there was no need to otherwise handle the asbestos-containing clutch plates. These mechanics also confirmed that wet methods were most frequently used to clean debris from the bell housing. Combining the asbestos exposure that occurred when mechanics performed clutch service, along with the duration

Switched causual modeling of transmission with clutch in hybrid electric vehicles

OpenAIRE

LHOMME, W; TRIGUI, R; DELARU, P; JEANNERET, B; BOUSCAUROL, A; BADIN, F

2008-01-01

Certain difficulties arise when attempting to model a clutch in a power train transmission due to its nonlinear behavior. Two different states have to be taken into account-the first being when the clutch is locked and the second being when the clutch is slipping. In this paper, a clutch model is developed using the Energetic Macroscopic Representation, which is, in turn, used in the modeling of complete hybrid electric vehicles (HEVs). Two different models are used, and a specific condition ...

Shift concept for starting clutch in powershift transmission; Schaltkonzept fuer Anfahrkupplungen in Lastschaltgetrieben

Energy Technology Data Exchange (ETDEWEB)

Grad, Karl; Cappellaro, Thomas [ZF Friedrichshafen AG, Passau (Germany); Oberbuchner, Thomas

2013-07-15

In powershift transmissions for tractors the starting clutch represents a core assembly, which is subjected to the highest stresses in use. ZF Friedrichshafen introduces a design in which the thermal stress on the starting clutches can be significantly reduced by changing the clutch actuation. This enables the starting clutches to be dimensioned substantially lighter or to save more space or their function can even be integrated into the powershift clutches.

Fitness cost of incubation in great tits (Parus major) is related to clutch size

Science.gov (United States)

de Heij, Maaike E; van den Hout, Piet J; Tinbergen, Joost M

2006-01-01

Life-history theory predicts that parents produce the number of offspring that maximizes their fitness. In birds, natural selection on parental decisions regarding clutch size may act during egg laying, incubation or nestling phase. To study the fitness consequences of clutch size during the incubation phase, we manipulated the clutch sizes during this phase only in three breeding seasons and measured the fitness consequences on the short and the long term. Clutch enlargement did not affect the offspring fitness of the manipulated first clutches, but fledging probability of the subsequent clutch in the same season was reduced. Parents incubating enlarged first clutches provided adequate care for the offspring of their first clutches during the nestling phase, but paid the price when caring for the offspring of their second clutch. Parents that incubated enlarged first clutches had lower local survival in the 2 years when the population had a relatively high production of second clutches, but not in the third year when there was a very low production of second clutches. During these 2 years, the costs of incubation were strong enough to change positive selection, as established by brood size manipulations in this study population, into stabilizing selection through the negative effect of incubation on parental fitness. PMID:16928638

Road deicing salt irreversibly disrupts osmoregulation of salamander egg clutches.

Science.gov (United States)

Karraker, Nancy E; Gibbs, James P

2011-03-01

It has been postulated that road deicing salts are sufficiently diluted by spring rains to ameliorate any physiological impacts to amphibians breeding in wetlands near roads. We tested this conjecture by exposing clutches of the spotted salamander (Ambystoma maculatum) to three chloride concentrations (1 mg/L, 145 mg/L, 945 mg/L) for nine days, then transferred clutches to control water for nine days, and measured change in mass at three-day intervals. We measured mass change because water uptake by clutches reduces risks to embryos associated with freezing, predation, and disease. Clutches in controls sequestered water asymptotically. Those in the moderate concentrations lost 18% mass initially and regained 14% after transfer to control water. Clutches in high concentration lost 33% mass and then lost an additional 8% after transfer. Our results suggest that spring rains do not ameliorate the effects of deicing salts in wetlands with extremely high chloride concentrations. Copyright © 2010 Elsevier Ltd. All rights reserved.

Factors influencing offspring traits in the oviparous multi-clutched ...

Indian Academy of Sciences (India)

Unknown

Calotes versicolor, a multi-clutched oviparous lizard. (Shanbhag and Prasad ... composes correlation between two variables in to: (i) the direct effect of the first ... color breeding time is the prime factor that influences the clutch mass and egg ...

High renesting rates in arctic-breeding Dunlin (Calidris alpina): A clutch-removal experiment

Science.gov (United States)

Gates, H. River; Lanctot, Richard B.; Powell, Abby N.

2013-01-01

The propensity to replace a clutch is a complex component of avian reproduction and poorly understood. We experimentally removed clutches from an Arctic-breeding shorebird, the Dunlin (Calidris alpina arcticola), during early and late stages of incubation to investigate replacement clutch rates, renesting interval, and mate and site fidelity between nesting attempts. In contrast to other Arctic studies, we documented renesting by radiotracking individuals to find replacement clutches. We also examined clutch size and mean egg volume to document changes in individual females’ investment in initial and replacement clutches. Finally, we examined the influence of adult body mass, clutch volume, dates of clutch initiation and nest loss, and year on the propensity to renest. We found high (82–95%) and moderate (35–50%) rates of renesting for early and late incubation treatments. Renesting intervals averaged 4.7–6.8 days and were not different for clutches removed early or late in incubation. Most pairs remained together for renesting attempts. Larger females were more likely to replace a clutch; female body mass was the most important parameter predicting propensity to renest. Clutches lost later in the season were less likely to be replaced. We present evidence that renesting is more common in Arctic-breeding shorebirds than was previously thought, and suggest that renesting is constrained by energetic and temporal factors as well as mate availability. Obtaining rates of renesting in species breeding at different latitudes will help determine when this behavior is likely to occur; such information is necessary for demographic models that include individual and population-level fecundity estimates.

Diapause in Calanoid Copepods: within-clutch hatching patterns

Directory of Open Access Journals (Sweden)

Bart T. DE STASIO

2004-09-01

Full Text Available Diapause is a major life history feature of many invertebrate organisms. Determining the phenology of diapause is critical for understanding survival and reproductive success of individuals as well as the long-term viability of many populations. The time spent in dormancy by individuals and variability among offspring in the duration of dormancy are two important aspects of invertebrate life histories. Some data are available, especially on duration of diapause, for plants and insects, but little information is available concerning variability among offspring in diapause traits. This is especially true for crustacean zooplankton, where essentially no information has been published on duration of diapause or variability among offspring in diapause timing or dynamics. Here I present data on the duration of diapause, and variability among offspring for diapause characteristics. The freshwater calanoid copepod Onychodiaptomus sanguineus, an obligately sexual species, was collected from Bullhead Pond, Rhode Island, U.S.A., and raised under conditions in the laboratory to induce production of diapausing eggs. One hundred clutches of these diapausing eggs (920 total eggs were incubated for over two years in a full-factorial experiment testing the effects of temperature and photoperiod cycles on the hatching dynamics and duration of diapause. Overall hatching success was highest (approximately 86% for eggs exposed to simultaneous temperature and photoperiod cycles mimicking natural changes, and was lowest (approximately 20% when eggs were incubated at constant temperature (4 °C and in constant dark conditions. The highest fraction of eggs hatched at approximately 550 days of age, but the age of eggs at hatching was highly variable among clutches. There was also large variability within clutches for hatching patterns, with some clutches containing eggs that all hatched synchronously and others in which eggs hatched more continuously throughout the

Nest predation risk explains variation in avian clutch size

Science.gov (United States)

Dillon, Kristen G.; Conway, Courtney J.

2018-01-01

Questions about the ecological drivers of, and mechanistic constraints on, productivity have driven research on life-history evolution for decades. Resource availability and offspring mortality are considered among the 2 most important influences on the number of offspring per reproductive attempt. We used a factorial experimental design to manipulate food abundance and perceived offspring predation risk in a wild avian population (red-faced warblers; Cardellina rubrifrons) to identify the mechanistic cause of variation in avian clutch size. Additionally, we tested whether female quality helped explain the extant variation in clutch size. We found no support for the Food Limitation or Female Quality Hypotheses, but we did find support for both predictions of the Nest Predation Risk Hypothesis. Females that experienced an experimentally heightened perception of offspring predation risk responded by laying a smaller clutch than females in the control group. Additionally, predation rates at artificial nests were highest where red-faced warbler clutch size was smallest (at high elevations). Life-history theory predicts that an individual should invest less in reproduction when high nest predation risk reduces the likely benefit from that nesting attempt and, indeed, we found that birds exhibit phenotypic plasticity in clutch size by laying fewer eggs in response to increasing nest predation risk.

A new method for speed control of a DC motor using magnetorheological clutch

Science.gov (United States)

Nguyen, Quoc Hung; Choi, Seung-Bok

2014-03-01

In this research, a new method to control speed of DC motor using magnetorheological (MR) clutch is proposed and realized. Firstly, the strategy of a DC motor speed control using MR clutch is proposed. The MR clutch configuration is then proposed and analyzed based on Bingham-plastic rheological model of MR fluid. An optimal designed of the MR clutch is then studied to find out the optimal geometric dimensions of the clutch that can transform a required torque with minimum mass. A prototype of the optimized MR clutch is then manufactured and its performance characteristics are experimentally investigated. A DC motor speed control system featuring the optimized MR clutch is designed and manufactured. A PID controller is then designed to control the output speed of the system. In order to evaluate the effectiveness of the proposed DC motor speed control system, experimental results of the system such as speed tracking performance are obtained and presented with discussions.

Performing under pressure: Exploring the psychological state underlying clutch performance in sport.

Science.gov (United States)

Swann, Christian; Crust, Lee; Jackman, Patricia; Vella, Stewart A; Allen, Mark S; Keegan, Richard

2017-12-01

Clutch performance is improved performance under pressure. However, little research has examined the psychological state experienced by athletes in these situations. Therefore, this study qualitatively examined the subjective experience underlying clutch performance across a range of sports (e.g., team, individual) and standards (Olympic to recreational athletes). Sixteen athletes (M age  = 27.08 years; SD = 6.48) took part in in-depth, semi-structured interviews primarily after an exceptional performance (M = 4.38 days later; SD = 3.14). Data were analysed inductively and thematically. Clutch states involved 12 characteristics, including heightened and deliberate concentration, intense effort, and heightened awareness, which distinguished the experience of clutch from other optimal psychological states such as flow. Other characteristics, such as perceptions of control, were also reported and supported previous experimental research on clutch. These findings present in-depth qualitative insights into the psychological state underlying clutch performance, and are discussed in relation to the existing literature on optimal psychological states in sport.

Method and apparatus for operating a powertrain system upon detecting a stuck-closed clutch

Science.gov (United States)

Hansen, R. Anthony

2014-02-18

A powertrain system includes a multi-mode transmission having a plurality of torque machines. A method for controlling the powertrain system includes identifying all presently applied clutches including commanded applied clutches and the stuck-closed clutch upon detecting one of the torque-transfer clutches is in a stuck-closed condition. A closed-loop control system is employed to control operation of the multi-mode transmission accounting for all the presently applied clutches.

Temperature control of an automotive engine cooling system utilizing a magneto-rheological fan clutch

International Nuclear Information System (INIS)

Kim, Eun-Seok; Choi, Seung-Bok; Park, Young-Gee; Lee, Soojin

2010-01-01

In this note, the temperature control of an automotive engine cooling system is undertaken using a magneto-rheological (MR) fluid-based fan clutch (MR fan clutch in short). In order to achieve this goal, an appropriate size of controllable fan clutch using an MR fluid is firstly devised by considering the design parameters of a conventional fan clutch to reflect the practical application. Then, the principal design parameters of the MR fan clutch such as the length of the disc are optimally determined through finite element analysis. The drum-type MR fan clutch is manufactured and its time response to input current is experimentally evaluated. A robust sliding mode controller is then formulated by treating the time constant of the fan clutch system as an uncertain parameter. After identifying the relationship between angular velocity of the MR fan clutch and the temperature of the cooling system, the sliding mode controller is experimentally realized for the cooling system. It has been clearly demonstrated that the proposed sliding mode controller follows well the desired temperature with a small regulating error. It is expected from this feasibility work that the proposed control system associated with an MR fan clutch can be effectively utilized for the automotive cooling system to improve the fuel efficiency. (technical note)

Development of a novel two-layer multiplate magnetorheological clutch for high-power applications

International Nuclear Information System (INIS)

Wang, Daoming; Tian, Zuzhi; Meng, Qingrui; Hou, Youfu

2013-01-01

A novel magnetorheological (MR) clutch for high-power applications is designed, simulated and tested. The clutch is implemented in a two-layer multiplate transmission form and adopts a two-way liquid cooling method to improve the heat dissipation capability. In this paper, a brief introduction to the transmission form of the proposed MR clutch is given first. Then, theoretical analyses of the output torque, magnetic circuit and temperature characteristic are conducted and further design details are presented and discussed, followed by a magnetostatic simulation of the designed circuit. A prototype of the clutch was fabricated and several tests were carried out to evaluate the torque transmission, time response and steady slip power of the prototype. The results show that the proposed MR clutch can produce a maximum output torque of 1545 N m and possesses a high steady slip power of up to 35 kW. Therefore, the developed two-layer multiplate MR clutch is promising for applications in many high-power situations. (paper)

Finite element fatigue analysis of rectangular clutch spring of automatic slack adjuster

Science.gov (United States)

Xu, Chen-jie; Luo, Zai; Hu, Xiao-feng; Jiang, Wen-song

2015-02-01

The failure of rectangular clutch spring of automatic slack adjuster directly affects the work of automatic slack adjuster. We establish the structural mechanics model of automatic slack adjuster rectangular clutch spring based on its working principle and mechanical structure. In addition, we upload such structural mechanics model to ANSYS Workbench FEA system to predict the fatigue life of rectangular clutch spring. FEA results show that the fatigue life of rectangular clutch spring is 2.0403×105 cycle under the effect of braking loads. In the meantime, fatigue tests of 20 automatic slack adjusters are carried out on the fatigue test bench to verify the conclusion of the structural mechanics model. The experimental results show that the mean fatigue life of rectangular clutch spring is 1.9101×105, which meets the results based on the finite element analysis using ANSYS Workbench FEA system.

Egg clutch dehydration induces early hatching in red-eyed treefrogs, Agalychnis callidryas

Directory of Open Access Journals (Sweden)

María José Salica

2017-07-01

Full Text Available Terrestrial eggs have evolved repeatedly in tropical anurans exposing embryos to the new threat of dehydration. Red-eyed treefrogs, Agalychnis callidryas, lay eggs on plants over water. Maternally provided water allows shaded eggs in humid sites to develop to hatching without rainfall, but unshaded eggs and those in less humid sites can die from dehydration. Hatching responses of amphibian eggs to dry conditions are known from two lineages with independent origins of terrestrial eggs. Here, we experimentally tested for dehydration-induced early hatching in another lineage (Agalychnis callidryas, Phyllomedusidae, representing a third independent origin of terrestrial eggs. We also investigated how dehydration affected egg and clutch structure, and egg mortality. We collected clutches from a pond in Gamboa, Panama, and randomly allocated them to wet or dry treatments at age 1 day. Embryos hatched earlier from dry clutches than from wet clutches, accelerating hatching by ∼11%. Clutch thickness and egg diameter were affected by dehydration, diverging between treatments over time. Meanwhile, mortality in dry clutches was six-fold higher than in control clutches. With this study, early hatching responses to escape mortality from egg dehydration are now known from three anuran lineages with independent origins of terrestrial eggs, suggesting they may be widespread. Further studies are needed to understand how terrestrial amphibian eggs can respond to, or will be affected by, rapid changes in climate over the next decades.

Females paired with new and heavy mates reduce intra-clutch differences in resource allocation.

Directory of Open Access Journals (Sweden)

Maud Poisbleau

Full Text Available Reproductive investment affects both offspring and parental fitness and influences the evolution of life histories. Females may vary their overall primary reproductive effort in relation to the phenotypic characteristics of their mate. However, the effects of male quality on differential resource allocation within clutches have been largely neglected despite the potential implications for mate choice and population dynamics, especially in species exhibiting biparental care and brood reduction. Female southern rockhopper penguins Eudyptes chrysocome paired with heavy mates reduced intra-clutch variation in egg and albumen masses. Females paired with new mates also reduced intra-clutch variation in yolk androgen levels. Since both an increased mass and increased androgen concentrations positively influence chick survival under sibling competition, the chances of fledging the whole clutch are likely to be higher for newly formed pairs with heavy males than for previously formed pairs with light males. Interestingly, total clutch provisioning did not vary with male quality. We show for the first time that females vary intra-clutch variation in resource allocation according to male quality. In species with brood reduction, it may be more adaptive for females to modulate the distribution of resources within the clutch according to breeding conditions, than to change their total clutch provisioning.

Organochlorine contaminants in complete clutches of Morelet's crocodile (Crocodylus moreletii) eggs from Belize

Energy Technology Data Exchange (ETDEWEB)

Wu, Ted H. [Department of Chemistry and Biochemistry, University of Alaska Fairbanks, Fairbanks, AK 99775-6160 (United States); Canas, Jaclyn E. [Institute of Environmental and Human Health, Texas Tech University, Box 41163, Lubbock, TX 79409 (United States); Rainwater, Thomas R. [Institute of Environmental and Human Health, PO Box 764, Jefferson, TX 75657 (United States); Platt, Steven G. [Department of Math and Science, Oglala Lakota College, 490 Piya Wiconi Road, Kyle, SD, 57752 (United States); McMurry, Scott T. [Institute of Environmental and Human Health, Texas Tech University, Box 41163, Lubbock, TX 79409 (United States); Anderson, Todd A. [Institute of Environmental and Human Health, Texas Tech University, Box 41163, Lubbock, TX 79409 (United States)]. E-mail: todd.anderson@ttu.edu

2006-11-15

Seven complete clutches of Morelet's crocodile (Crocodylus moreletii) eggs were collected in northern Belize and examined for organochlorine (OC) pesticide residues. The primary OC detected, p,p-DDE, was found in every egg analyzed (n = 175). Other OCs detected included p,p-DDT, p,p-DDD, methoxychlor, aldrin, and endosulfan I. Concentrations of individual OCs ranged from 4 ppb (ng chemical/g egg wet weight) to greater than 500 ppb. A statistical evaluation of p,p-DDE levels in three complete clutches was used to derive the minimum number of eggs needed from a clutch to precisely determine the mean p,p-DDE concentration representative of that clutch. Sample sizes of 8 (80% confidence level) and 11 (90% confidence level) were determined to yield an accurate estimate of contaminant levels in a full clutch of eggs. The statistically recommended sample size of 11 eggs (at 90% confidence level) was successfully tested on the four additional clutches. -- Sampling the non-viable eggs of a clutch can provide a statistically reasonable estimation of both the organochlorine contaminant distribution and concentrations in that clutch.

Detection technology research on the one-way clutch of automatic brake adjuster

Science.gov (United States)

Jiang, Wensong; Luo, Zai; Lu, Yi

2013-10-01

In this article, we provide a new testing method to evaluate the acceptable quality of the one-way clutch of automatic brake adjuster. To analysis the suitable adjusting brake moment which keeps the automatic brake adjuster out of failure, we build a mechanical model of one-way clutch according to the structure and the working principle of one-way clutch. The ranges of adjusting brake moment both clockwise and anti-clockwise can be calculated through the mechanical model of one-way clutch. Its critical moment, as well, are picked up as the ideal values of adjusting brake moment to evaluate the acceptable quality of one-way clutch of automatic brake adjuster. we calculate the ideal values of critical moment depending on the different structure of one-way clutch based on its mechanical model before the adjusting brake moment test begin. In addition, an experimental apparatus, which the uncertainty of measurement is ±0.1Nm, is specially designed to test the adjusting brake moment both clockwise and anti-clockwise. Than we can judge the acceptable quality of one-way clutch of automatic brake adjuster by comparing the test results and the ideal values instead of the EXP. In fact, the evaluation standard of adjusting brake moment applied on the project are still using the EXP provided by manufacturer currently in China, but it would be unavailable when the material of one-way clutch changed. Five kinds of automatic brake adjusters are used in the verification experiment to verify the accuracy of the test method. The experimental results show that the experimental values of adjusting brake moment both clockwise and anti-clockwise are within the ranges of theoretical results. The testing method provided by this article vividly meet the requirements of manufacturer's standard.

Variation in clutch size in relation to nest size in birds.

Science.gov (United States)

Møller, Anders P; Adriaensen, Frank; Artemyev, Alexandr; Bańbura, Jerzy; Barba, Emilio; Biard, Clotilde; Blondel, Jacques; Bouslama, Zihad; Bouvier, Jean-Charles; Camprodon, Jordi; Cecere, Francesco; Charmantier, Anne; Charter, Motti; Cichoń, Mariusz; Cusimano, Camillo; Czeszczewik, Dorota; Demeyrier, Virginie; Doligez, Blandine; Doutrelant, Claire; Dubiec, Anna; Eens, Marcel; Eeva, Tapio; Faivre, Bruno; Ferns, Peter N; Forsman, Jukka T; García-Del-Rey, Eduardo; Goldshtein, Aya; Goodenough, Anne E; Gosler, Andrew G; Góźdź, Iga; Grégoire, Arnaud; Gustafsson, Lars; Hartley, Ian R; Heeb, Philipp; Hinsley, Shelley A; Isenmann, Paul; Jacob, Staffan; Järvinen, Antero; Juškaitis, Rimvydas; Korpimäki, Erkki; Krams, Indrikis; Laaksonen, Toni; Leclercq, Bernard; Lehikoinen, Esa; Loukola, Olli; Lundberg, Arne; Mainwaring, Mark C; Mänd, Raivo; Massa, Bruno; Mazgajski, Tomasz D; Merino, Santiago; Mitrus, Cezary; Mönkkönen, Mikko; Morales-Fernaz, Judith; Morin, Xavier; Nager, Ruedi G; Nilsson, Jan-Åke; Nilsson, Sven G; Norte, Ana C; Orell, Markku; Perret, Philippe; Pimentel, Carla S; Pinxten, Rianne; Priedniece, Ilze; Quidoz, Marie-Claude; Remeš, Vladimir; Richner, Heinz; Robles, Hugo; Rytkönen, Seppo; Senar, Juan Carlos; Seppänen, Janne T; da Silva, Luís P; Slagsvold, Tore; Solonen, Tapio; Sorace, Alberto; Stenning, Martyn J; Török, János; Tryjanowski, Piotr; van Noordwijk, Arie J; von Numers, Mikael; Walankiewicz, Wiesław; Lambrechts, Marcel M

2014-09-01

Nests are structures built to support and protect eggs and/or offspring from predators, parasites, and adverse weather conditions. Nests are mainly constructed prior to egg laying, meaning that parent birds must make decisions about nest site choice and nest building behavior before the start of egg-laying. Parent birds should be selected to choose nest sites and to build optimally sized nests, yet our current understanding of clutch size-nest size relationships is limited to small-scale studies performed over short time periods. Here, we quantified the relationship between clutch size and nest size, using an exhaustive database of 116 slope estimates based on 17,472 nests of 21 species of hole and non-hole-nesting birds. There was a significant, positive relationship between clutch size and the base area of the nest box or the nest, and this relationship did not differ significantly between open nesting and hole-nesting species. The slope of the relationship showed significant intraspecific and interspecific heterogeneity among four species of secondary hole-nesting species, but also among all 116 slope estimates. The estimated relationship between clutch size and nest box base area in study sites with more than a single size of nest box was not significantly different from the relationship using studies with only a single size of nest box. The slope of the relationship between clutch size and nest base area in different species of birds was significantly negatively related to minimum base area, and less so to maximum base area in a given study. These findings are consistent with the hypothesis that bird species have a general reaction norm reflecting the relationship between nest size and clutch size. Further, they suggest that scientists may influence the clutch size decisions of hole-nesting birds through the provisioning of nest boxes of varying sizes.

FEATURES OF CONTROLLING ELECTROPNEUMATIC VALVES OF ACTUATOR TO CONTROL ITS CLUTCH WITH ACCELERATION VALVE

Directory of Open Access Journals (Sweden)

O. A. Yaryta

2018-01-01

Full Text Available The article deals with one of the ways to control an actuator of the automated clutch control system. The aim is to design control of the electropneumatic actuator, to control its coupling with the acceleration valve on the basis of experimental research as well as to provide rational parameters of the automated clutch control system for the robotic transmission. The feature of the system is an acceleration valve in the design of the electropneumatic actuator to control the clutch. New links demand to adjust the way to control the actuator. The connection of Pulse-Width Modulation (PWM with single power supply pulses to control electropneumatic valves is substantiated. The quantitative characteristics of single control pulses and PWM ones are determined. The error of operation accuracy for various ways of the control of the electropneumatic actuator to control the clutch of the robotic transmission is determined. Obtained separate PWM area is designed to suppress the initial hysteresis when the rod of the clutch actuator is moved. An algorithm for the operation of a clutch control system is proposed, taking into account the use of two modes of operation of solenoid valves. A graphical interpretation of the clutch control algorithm is presented, which gives an idea of the location of the constant signal feeding zones to the solenoid valve, as well as the operation areas of the solenoid valve in PWM mode. The control algorithm of the clutch booster provides a mode of guaranteed absence of excess pressure in the pneumatic cylinder after releasing the clutch pedal, provided that two normally closed solenoid valves are used. This configuration of the electro-pneumatic clutch control system allows the use of an emergency clutch release system in case of voltage absence. The reference algorithm for filtering the array of data coming from the feedback sensor, as well as the numerical values of the delay caused by the presence of a filter, are given.

Is the evolution of clutch size limited by incubation ability in shorebirds?

OpenAIRE

Beatty, Jessica Lynne

2015-01-01

Incubation is a crucial aspect of avian life history where differences in incubation techniques and investments can have long lasting effects on offspring and parental well- being and reproductive success. The factors limiting why some birds, such as shorebirds, have fixed clutch sizes has intrigued life history theorist to propose different hypotheses about the evolution of clutch size. Lack's "incubation limitation hypothesis," suggesting that clutch size is limited by the amount of eggs a ...

On the Energy Efficiency of Dual Clutch Transmissions and Automated Manual Transmissions

Directory of Open Access Journals (Sweden)

Fabio Vacca

2017-10-01

Full Text Available The main benefits of dual clutch transmissions (DCTs are: (i a higher energy efficiency than automatic transmission systems with torque converters; and (ii the capability to fill the torque gap during gear shifts to allow seamless longitudinal acceleration profiles. Therefore, DCTs are viable alternatives to automated manual transmissions (AMTs. For vehicles equipped with engines that can generate considerable torque, large clutch-slip energy losses occur during power-on gear shifts and, as a result, DCTs need wet clutches for effective heat dissipation. This requirement substantially reduces DCT efficiency because of the churning and ancillary power dissipations associated with the wet clutch pack. To the knowledge of the authors, this study is the first to analyse the detailed power loss contributions of a DCT with wet clutches, and their relative significance along a set of driving cycles. Based on these results, a novel hybridised AMT (HAMT with a single dry clutch and an electric motor is proposed for the same vehicle. The HAMT architecture combines the high mechanical efficiency typical of AMTs with a single dry clutch, with the torque-fill capability and operational flexibility allowed by the electric motor. The measured efficiency maps of a case study DCT and HAMT are compared. This is then complemented by the analysis of the respective fuel consumption along the driving cycles, which is simulated with an experimentally validated vehicle model. In its internal combustion engine mode, the HAMT reduces fuel consumption by >9% with respect to the DCT.

A conceptual framework for clutch size evolution in songbirds

Science.gov (United States)

Martin, Thomas E.

2014-01-01

Causes of evolved differences in clutch size among songbird species remain debated. I propose a new conceptual framework that integrates aspects of traditional life history theory, while including novel elements, to explain evolution of clutch size among songbirds. I review evidence that selection by nest predation on length of time that offspring develop in the nest creates a gradient in offspring characteristics at nest-leaving (fledging), including flight mobility, spatial dispersion, and self-feeding rate. I postulate that this gradient has consequences for offspring mortality rates and parental energy expenditure per offspring. These consequences then determine how reproductive effort is partitioned among offspring, while reproductive effort evolves from age-specific mortality effects. Using data from a long-term site in Arizona, as well as from the literature, I provide support for hypothesized relationships. Nestling development period consistently explains fledgling mortality, energy expenditure per offspring, and clutch size while accounting for reproductive effort (i.e., total energy expenditure) to thereby support the framework. Tests in this paper are not definitive, but they document previously unrecognized relationships and address diverse traits (developmental strategies, parental care strategies, energy requirements per offspring, evolution of reproductive effort, clutch size) that justify further investigations of hypotheses proposed here.

Modeling and analysis of friction clutch at a driveline for suppressing car starting judder

Science.gov (United States)

Li, Liping; Lu, Zhaijun; Liu, Xue-Lai; Sun, Tao; Jing, Xingjian; Shangguan, Wen-Bin

2018-06-01

Car judder is a kind of back-forth vibration during vehicle starting which caused by the torsional oscillation of the driveline. This paper presents a systematic study on the dynamic response characteristics of the clutch driven disc for suppression of the judder during vehicle starting. Self-excited vibration behavior of the clutch driven disc is analyzed based on the developed 4DOF non-linear multi-body dynamic model of the clutch driving process considering stick-slip characteristics and using Karnopp friction models. Physical parameters of a clutch determining the generations of the judder behaviors are discussed and the revised designs of the driven disc of a clutch for suppression of the judder are consequently investigated and validated with experiments for two real cars.

Development of magneto-rheologial fluid (MRF) based clutch for output torque control of AC motors

Science.gov (United States)

Nguyen, Q. Hung; Do, H. M. Hieu; Nguyen, V. Quoc; Nguyen, N. Diep; Le, D. Thang

2018-03-01

In industry, the AC motor is widely used because of low price, power availability, low cost maintenance. The main disadvantages of AC motors compared to DC motors are difficulty in speed and torque control, requiring expensive controllers with complex control algorithms. This is the basic limitations in the widespread adoption of AC motor systems for industrial automation. One feasible solution for AC motor control is using MRF (magneto-rheological fluid) based clutches (shortly called MR clutches) Although there have been many studies on MR clutches, most of these clutches used traditional configuration with coils wound on the middle cylindrical part and a compotator is used to supply power to the coils. Therefore, this type of MR clutches possesses many disadvantages such as high friction and unstable applied current due to commutator, complex structure which causes difficulty in manufacture, assembly, and maintenance. In addition, the bottleneck problem of magnetic field is also a challenging issue. In this research, we will develop a new type of MR clutches that overcomes the abovementioned disadvantages of traditional MR clutches and more suitable for application in controlling of AC motor. Besides, in this study, speed and torque control system for AC motors using developed MR clutches is designed and experimental validated.

Beyond size–number trade-offs: clutch size as a maternal effect

Science.gov (United States)

Brown, Gregory P.; Shine, Richard

2009-01-01

Traditionally, research on life-history traits has viewed the link between clutch size and offspring size as a straightforward linear trade-off; the product of these two components is taken as a measure of maternal reproductive output. Investing more per egg results in fewer but larger eggs and, hence, offspring. This simple size–number trade-off has proved attractive to modellers, but our experimental studies on keelback snakes (Tropidonophis mairii, Colubridae) reveal a more complex relationship between clutch size and offspring size. At constant water availability, the amount of water taken up by a snake egg depends upon the number of adjacent eggs. In turn, water uptake affects hatchling size, and therefore an increase in clutch size directly increases offspring size (and thus fitness under field conditions). This allometric advantage may influence the evolution of reproductive traits such as growth versus reproductive effort, optimal age at female maturation, the body-reserve threshold required to initiate reproduction and nest-site selection (e.g. communal oviposition). The published literature suggests that similar kinds of complex effects of clutch size on offspring viability are widespread in both vertebrates and invertebrates. Our results also challenge conventional experimental methodologies such as split-clutch designs for laboratory incubation studies: by separating an egg from its siblings, we may directly affect offspring size and thus viability. PMID:19324614

Life-history and ecological correlates of geographic variation in egg and clutch mass among passerine species

Science.gov (United States)

Martin, T.E.; Bassar, R.D.; Bassar, S.K.; Fontaine, J.J.; Lloyd, P.; Mathewson, Heather A.; Niklison, Alina M.; Chalfoun, A.

2006-01-01

Broad geographic patterns in egg and clutch mass are poorly described, and potential causes of variation remain largely unexamined. We describe interspecific variation in avian egg and clutch mass within and among diverse geographic regions and explore hypotheses related to allometry, clutch size, nest predation, adult mortality, and parental care as correlates and possible explanations of variation. We studied 74 species of Passeriformes at four latitudes on three continents: the north temperate United States, tropical Venezuela, subtropical Argentina, and south temperate South Africa. Egg and clutch mass increased with adult body mass in all locations, but differed among locations for the same body mass, demonstrating that egg and clutch mass have evolved to some extent independent of body mass among regions. A major portion of egg mass variation was explained by an inverse relationship with clutch size within and among regions, as predicted by life-history theory. However, clutch size did not explain all geographic differences in egg mass; eggs were smallest in South Africa despite small clutch sizes. These small eggs might be explained by high nest predation rates in South Africa; life-history theory predicts reduced reproductive effort under high risk of offspring mortality. This prediction was supported for clutch mass, which was inversely related to nest predation but not for egg mass. Nevertheless, clutch mass variation was not fully explained by nest predation, possibly reflecting interacting effects of adult mortality. Tests of the possible effects of nest predation on egg mass were compromised by limited power and by counterposing direct and indirect effects. Finally, components of parental investment, defined as effort per offspring, might be expected to positively coevolve. Indeed, egg mass, but not clutch mass, was greater in species that shared incubation by males and females compared with species in which only females incubate eggs. However, egg and

Strong but variable associations between social dominance and clutch sex ratio in a colonial corvid

NARCIS (Netherlands)

Salomons, H. M.; Dijkstra, C.; Verhulst, S.

2008-01-01

We studied primary sex ratio of clutches in relation to social dominance for 6 years in a colony of free-living jackdaws, a small corvid. Social dominance was strongly associated with clutch sex ratio, with the difference in clutch sex ratio between the most and least dominant pairs being 30-40%. To

Model for adhesion clutch explains biphasic relationship between actin flow and traction at the cell leading edge

Science.gov (United States)

Craig, Erin M.; Stricker, Jonathan; Gardel, Margaret L.; Mogilner, Alex

2015-01-01

Cell motility relies on the continuous reorganization of a dynamic actin-myosin-adhesion network at the leading edge of the cell, in order to generate protrusion at the leading edge and traction between the cell and its external environment. We analyze experimentally measured spatial distributions of actin flow, traction force, myosin density, and adhesion density in control and pharmacologically perturbed epithelial cells in order to develop a mechanical model of the actin-adhesion-myosin self-organization at the leading edge. A model in which the F-actin network is treated as a viscous gel, and adhesion clutch engagement is strengthened by myosin but weakened by actin flow, can explain the measured molecular distributions and correctly predict the spatial distributions of the actin flow and traction stress. We test the model by comparing its predictions with measurements of the actin flow and traction stress in cells with fast and slow actin polymerization rates. The model predicts how the location of the lamellipodium-lamellum boundary depends on the actin viscosity and adhesion strength. The model further predicts that the location of the lamellipodium-lamellum boundary is not very sensitive to the level of myosin contraction. PMID:25969948

Estimating the Economic Benefits of Forward-Engaged Naval Forces

National Research Council Canada - National Science Library

Looney, Robert E; Schrady, David A; Brown, Ronald L

2001-01-01

In preparing for the 1997 quadrennial defense review, U.S. Navy leaders asked the Naval Postgraduate School to study the economic benefits of forward-engaged naval forces and communicate them to policy makers and the public...

Environmental influences on egg and clutch sizes in lentic- and lotic-breeding salamanders

Directory of Open Access Journals (Sweden)

Jon M. Davenport

2010-12-01

Full Text Available Recent research indicates that social and environmental factors influence egg and clutch sizes in amphibians. However, most of this work is based on the reproductively diverse order Anura (frogs and toads, whereas less research has been conducted on Caudata (salamanders and Gymnophiona (caecilians. Researchers have suggested that a relationship exists between social and environmental factors and egg and clutch sizes in salamanders, but studies controlling for phylogenetic context are lacking. We could not identify a sufficient number of comparisons for social influences on egg and clutch sizes; therefore, we focused on environmental influences for this study. Data on egg size, clutch size, environmental factors, and phylogenies for salamanders were assembled from the scientific literature. We used independent, pair-wise comparisons to investigate the association of larval salamander habitat and egg size and the association of larval salamander habitat with clutch sizes within a phylogenetic framework. There is a significant association between larval habitat and egg size; specifically, stream-breeding species produce larger eggs. There is no significant association between larval habitat and clutchsize. Our study confirms earlier reports that salamander egg size is associated with larval environments, but is the first to use phylogenetically independent contrasts to account for the lack of phylogenetic independence of the traits measured (egg size and clutch size associated with many of the diverse lineages. Our study shows that environmental selection pressure can be quite strong on one aspect of salamander reproduction—egg size.

Predictive Reliability Assessment of the Automatic Clutch on a Primary Sodium Pump Drive

International Nuclear Information System (INIS)

Westwell, P.

1975-01-01

This paper examines the reliability of a group of three clutch couplings each mounted between a pony motor and the main drive for the primary sodium pumps. The sodium pumps specification requires that continuously running AC pony motors be fitted to give a guaranteed 10% drive to the pumps in the event of a main supply failure. The drive to the main shaft is via 3 : 1 reduction gearing such that a six pole pony motor running at 300 rpm would drive the main shaft at 100 rpm i.e., 10% of its rated speed. In order that the pony motor drive could be permanently energised during normal operation a free wheeling clutch is fitted between the motor and the reduction gearing. The type of clutch chosen is. the Synchro-Self Shifting (SSS) clutch, shown in Figure 1. This type of clutch has proved itself under fairly onerous operating conditions, but is normally mounted on a horizontal driving shaft whereas in this case because of space limitations, it is necessary to mount it vertically. The reliability target set is that the chance of losing all three independent back-up pony motor drives on loss of main supplies should fall within the 10 -5 - 10 -6 band. Since the electrical supplies and other parts of the pony motor drives have been assessed within this target and some doubts expressed about the clutch it was now necessary to look at this in some detail

Computing eigenvalue sensitivity coefficients to nuclear data based on the CLUTCH method with RMC code

International Nuclear Information System (INIS)

Qiu, Yishu; She, Ding; Tang, Xiao; Wang, Kan; Liang, Jingang

2016-01-01

Highlights: • A new algorithm is proposed to reduce memory consumption for sensitivity analysis. • The fission matrix method is used to generate adjoint fission source distributions. • Sensitivity analysis is performed on a detailed 3D full-core benchmark with RMC. - Abstract: Recently, there is a need to develop advanced methods of computing eigenvalue sensitivity coefficients to nuclear data in the continuous-energy Monte Carlo codes. One of these methods is the iterated fission probability (IFP) method, which is adopted by most of Monte Carlo codes of having the capabilities of computing sensitivity coefficients, including the Reactor Monte Carlo code RMC. Though it is accurate theoretically, the IFP method faces the challenge of huge memory consumption. Therefore, it may sometimes produce poor sensitivity coefficients since the number of particles in each active cycle is not sufficient enough due to the limitation of computer memory capacity. In this work, two algorithms of the Contribution-Linked eigenvalue sensitivity/Uncertainty estimation via Tracklength importance CHaracterization (CLUTCH) method, namely, the collision-event-based algorithm (C-CLUTCH) which is also implemented in SCALE and the fission-event-based algorithm (F-CLUTCH) which is put forward in this work, are investigated and implemented in RMC to reduce memory requirements for computing eigenvalue sensitivity coefficients. While the C-CLUTCH algorithm requires to store concerning reaction rates of every collision, the F-CLUTCH algorithm only stores concerning reaction rates of every fission point. In addition, the fission matrix method is put forward to generate the adjoint fission source distribution for the CLUTCH method to compute sensitivity coefficients. These newly proposed approaches implemented in RMC code are verified by a SF96 lattice model and the MIT BEAVRS benchmark problem. The numerical results indicate the accuracy of the F-CLUTCH algorithm is the same as the C-CLUTCH

Clutch size in populations and species of cnemidophorines (Squamata: Teiidae on the eastern coast of Brazil

Directory of Open Access Journals (Sweden)

VANDERLAINE A. MENEZES

2014-06-01

Full Text Available We analyzed some reproductive aspects of 16 coastal populations, belonging to five lizard species (A. ocellifera, A. abaetensis, A. nativo, A. littoralis and C. lacertoides from different restinga habitats along the eastern coast of Brazil. This study aimed to evaluate to what extent the reproductive aspects vary geographically and among species. For each female, we recorded the number of vitellogenic follicles, size and color of the largest follicle, presence and size of corpora lutea, and number and size of oviductal eggs. Clutch size of almost all coastal populations/species of Ameivula had little variation and most clutches were composed of two eggs. There was a significant relationship between female size and the mean clutch size when females from different species were pooled. Mean egg volume, among species, varied from 420 to 655 mm3. Relative clutch mass varied from 0.129 to 0.159 and did not differ significantly among species. We concluded that the five coastal species studied (four bisexuals and one parthenogenetic had similar reproductive characteristics. Most of them presented multiple clutches, low clutch size and low relative clutch mass, similar to other species in the genus and to unisexual and bisexual species of the Teiidae family.

Count your eggs before they invade: identifying and quantifying egg clutches of two invasive apple snail species (Pomacea.

Directory of Open Access Journals (Sweden)

Colin H Kyle

Full Text Available Winning the war against invasive species requires early detection of invasions. Compared to terrestrial invaders, aquatic species often thrive undetected under water and do not garner notice until too late for early action. However, fortunately for managers, apple snails (Family Ampullariidae, Genus Pomacea provide their own conspicuous sign of invasion in the form of vibrantly colored egg clutches. Managers can potentially use egg clutches laid in the riparian zone as a means of early detection and species identification. To facilitate such efforts, we quantified differences in characteristics (length, width, depth, mass, egg number of field-laid clutches for the two most common invasive species of apple snail, P. canaliculata and P. maculata, in native and non-native populations. Pomacea canaliculata native and non-native populations differed noticeably only in width. Native P. maculata clutches possessed significantly greater width, mass and eggs numbers compared with native P. canaliculata. Non-native P. maculata clutches significantly exceeded all other populations in all measured characteristics. Consequently, these traits may successfully distinguish between species. Fecundity data also allowed us to develop models that accurately estimated the number of eggs per clutch for each species based on clutch dimensions. We tested one, two and three dimensional models of clutches, including rendering a clutch as either a complete ellipsoid or an ellipsoid intersected by a cylinder to represent the oviposition site. Model comparisons found the product of length and depth, with a different function for each population, best predicted egg number for both species. Comparisons of egg number to clutch volume and mass implied non-native P. canaliculata may be food limited, while non-native P. maculata appeared to produce such enormous clutches by having access to greater nutrients than the native population. With these new tools, researchers and

Lubricant flow analysis for effective lubrication of tractor forward/reverse clutch

Directory of Open Access Journals (Sweden)

Daekyung Noh

2017-04-01

Full Text Available Owing to the high power requirements of tractors, their low-power transmission gears often experience durability problems such as burning of the clutch. The operation of tractors under high load conditions also causes clutch slip, with the consequent longer operation duration exacerbating the burning of the friction plate. Solving this problem requires effective lubricant distribution. This was achieved in the present study by the development of an analysis model for predicting the lubricant flow rate. The reliability of the model was verified by comparing its predictions for various operation conditions with experimental measurements. Using the model, it was determined that effective distribution of the lubricant could be achieved without significant modification of the system, by only adjusting the gaps between the clutch piston and the housing, and between the separation plates and the case. Keywords: Mechanical engineering

Differences in size between first and replacement clutches match the seasonal decline in single clutches in Tree Swallows

NARCIS (Netherlands)

Karagicheva, J.; Liebers, M.; Rakhimberdiev, E.; Hallinger, K.; Saveliev, A.; Winkler, D.W.

2016-01-01

The seasonal decline in clutch size in birds can be a response to the environmentallyconditioned decrease in prospects for offspring or a consequence of a lower physical abilityof late-breeding females. To find out which of the explanations apply in Tree SwallowsTachycineta bicolor, we assessed

Regional drivers of clutch loss reveal important trade-offs for beach-nesting birds.

Science.gov (United States)

Maslo, Brooke; Schlacher, Thomas A; Weston, Michael A; Huijbers, Chantal M; Anderson, Chris; Gilby, Ben L; Olds, Andrew D; Connolly, Rod M; Schoeman, David S

2016-01-01

Coastal birds are critical ecosystem constituents on sandy shores, yet are threatened by depressed reproductive success resulting from direct and indirect anthropogenic and natural pressures. Few studies examine clutch fate across the wide range of environments experienced by birds; instead, most focus at the small site scale. We examine survival of model shorebird clutches as an index of true clutch survival at a regional scale (∼200 km), encompassing a variety of geomorphologies, predator communities, and human use regimes in southeast Queensland, Australia. Of the 132 model nests deployed and monitored with cameras, 45 (34%) survived the experimental exposure period. Thirty-five (27%) were lost to flooding, 32 (24%) were depredated, nine (7%) buried by sand, seven (5%) destroyed by people, three (2%) failed by unknown causes, and one (1%) was destroyed by a dog. Clutch fate differed substantially among regions, particularly with respect to losses from flooding and predation. 'Topographic' exposure was the main driver of mortality of nests placed close to the drift line near the base of dunes, which were lost to waves (particularly during storms) and to a lesser extent depredation. Predators determined the fate of clutches not lost to waves, with the depredation probability largely influenced by region. Depredation probability declined as nests were backed by higher dunes and were placed closer to vegetation. This study emphasizes the scale at which clutch fate and survival varies within a regional context, the prominence of corvids as egg predators, the significant role of flooding as a source of nest loss, and the multiple trade-offs faced by beach-nesting birds and those that manage them.

Regional drivers of clutch loss reveal important trade-offs for beach-nesting birds

Directory of Open Access Journals (Sweden)

Brooke Maslo

2016-09-01

Full Text Available Coastal birds are critical ecosystem constituents on sandy shores, yet are threatened by depressed reproductive success resulting from direct and indirect anthropogenic and natural pressures. Few studies examine clutch fate across the wide range of environments experienced by birds; instead, most focus at the small site scale. We examine survival of model shorebird clutches as an index of true clutch survival at a regional scale (∼200 km, encompassing a variety of geomorphologies, predator communities, and human use regimes in southeast Queensland, Australia. Of the 132 model nests deployed and monitored with cameras, 45 (34% survived the experimental exposure period. Thirty-five (27% were lost to flooding, 32 (24% were depredated, nine (7% buried by sand, seven (5% destroyed by people, three (2% failed by unknown causes, and one (1% was destroyed by a dog. Clutch fate differed substantially among regions, particularly with respect to losses from flooding and predation. ‘Topographic’ exposure was the main driver of mortality of nests placed close to the drift line near the base of dunes, which were lost to waves (particularly during storms and to a lesser extent depredation. Predators determined the fate of clutches not lost to waves, with the depredation probability largely influenced by region. Depredation probability declined as nests were backed by higher dunes and were placed closer to vegetation. This study emphasizes the scale at which clutch fate and survival varies within a regional context, the prominence of corvids as egg predators, the significant role of flooding as a source of nest loss, and the multiple trade-offs faced by beach-nesting birds and those that manage them.

Paternal care and male mate-attraction effort in the European starling is adjusted to clutch size.

Science.gov (United States)

Komdeur, Jan; Wiersma, Popko; Magrath, Michael

2002-06-22

In facultative polygynous birds with biparental care, a trade-off may occur between male parental care and attraction of additional mates. If there is a cost associated with reduced male parental care, the relative benefit of mate attraction may be predicted to decrease as the size of a male's clutch or brood increases. We tested this prediction in monogamous pairs of facultatively polygynous European starlings (Sturnus vulgaris). The larger the clutch, the more time the male spent incubating and the less time he spent attracting an additional female (i.e. singing near and carrying green nesting material into adjacent empty nest-boxes). Reduced paternal incubation resulted in lower overall incubation (the female did not compensate) and lower hatching success. Immediately after experimental reduction of clutches, males spent significantly less time incubating and more time singing and carrying greenery, and vice versa for experimentally enlarged clutches. Males with experimentally reduced clutches attracted a second female more often than males with experimentally enlarged clutches. This is the first study, to our knowledge, to provide experimental evidence for an adjustment of paternal care and male mate-attraction effort to clutch size. However, a trade-off between paternal nestling provisioning and mate attraction was not revealed, probably due to the absence of unpaired females by that time in the breeding season. Experiments showed that the relative contribution of the male and female to nestling provisioning was unrelated to brood size.

Evolution of parental incubation behaviour in dinosaurs cannot be inferred from clutch mass in birds

OpenAIRE

Birchard, Geoffrey F.; Ruta, Marcello; Deeming, D. Charles

2013-01-01

A recent study proposed that incubation behaviour (i.e. type of parental care) in theropod dinosaurs can be inferred from an allometric analysis of clutch volume in extant birds. However, the study in question failed to account for factors known to affect egg and clutch size in living bird species. A new scaling analysis of avian clutch mass demonstrates that type of parental care cannot be distinguished by conventional allometry because of the confounding effects of phylogeny and hatchling m...

Fitness cost of incubation in great tits (Parus major) is related to clutch size

NARCIS (Netherlands)

de Heij, Maaike E.; van den Hout, Piet J.; Tinbergen, Joost M.

2006-01-01

Life-history theory predicts that parents produce the number of offspring that maximizes their fitness. In birds, natural selection on parental decisions regarding clutch size may act during egg laying, incubation or nestling phase. To study the fitness consequences of clutch size during the

Different temperature and cooling patterns at the blunt and sharp egg poles reflect the arrangement of eggs in an avian clutch.

Science.gov (United States)

Šálek, Miroslav E; Zárybnická, Markéta

2015-01-01

Incubation is an energetically demanding process during which birds apply heat to their eggs to ensure embryonic development. Parent behaviours such as egg turning and exchanging the outer and central eggs in the nest cup affect the amount of heat lost to the environment from individual eggs. Little is known, however, about whether and how egg surface temperature and cooling rates vary among the different areas of an egg and how the arrangement of eggs within the clutch influences heat loss. We performed laboratory (using Japanese quail eggs) and field (with northern lapwing eggs) experiments using infrared imaging to assess the temperature and cooling patterns of heated eggs and clutches. We found that (i) the sharp poles of individual quail eggs warmed to a higher egg surface temperature than did the blunt poles, resulting in faster cooling at the sharp poles compared to the blunt poles; (ii) both quail and lapwing clutches with the sharp poles oriented towards the clutch centre (arranged clutches) maintained higher temperatures over the central part of the clutch than occurred in those clutches where most of the sharp egg poles were oriented towards the exterior (scattered clutches); and (iii) the arranged clutches of both quail and lapwing showed slower cooling rates at both the inner and outer clutch positions than did the respective parts of scattered clutches. Our results demonstrate that egg surface temperature and cooling rates differ between the sharp and blunt poles of the egg and that the orientation of individual eggs within the nest cup can significantly affect cooling of the clutch as a whole. We suggest that birds can arrange their eggs within the nest cup to optimise thermoregulation of the clutch.

Nest predation, clutch size, and physiological costs of egg production in the song sparrow (Melospiza melodia)

OpenAIRE

Travers, Marc Simon

2009-01-01

We examined the effects of nest predation on both clutch size and the physiological cost of egg production using a clutch removal experiment in free-living song sparrows (Melospiza melodia), inducing “high nest predation” (HNP) females to produce many replacement clutches compared to “low nest predation” (LNP) females. In a preliminary analysis we investigated the utility of multiple measures to assess “physiological condition”, including inter-correlations between physiological traits, sex d...

Evolution of avian clutch size along latitudinal gradients: do seasonality, nest predation or breeding season length matter?

Science.gov (United States)

Griebeler, E M; Caprano, T; Böhning-Gaese, K

2010-05-01

Birds display a latitudinal gradient in clutch size with smaller clutches in the tropics and larger in the temperate region. Three factors have been proposed to affect this pattern: seasonality of resources (SR), nest predation and length of the breeding season (LBS). Here, we test the importance of these factors by modelling clutch size evolution within bird populations under different environmental settings. We use an individual-based ecogenetic simulation model that combines principles from population ecology and life history theory. Results suggest that increasing SR from the tropics to the poles by itself or in combination with a decreasing predation rate and LBS can generate the latitudinal gradient in clutch size. Annual fecundity increases and annual adult survival rate decreases from the tropics to the poles. We further show that the annual number of breeding attempts that (together with clutch size) determines total annual egg production is an important trait to understand latitudinal patterns in these life history characteristics. Field experiments that manipulate environmental factors have to record effects not only on clutch size, but also on annual number of breeding attempts. We use our model to predict the outcome of such experiments under different environmental settings.

Peculiar Designing Features of Control Electromagnet Clutch Drives

Directory of Open Access Journals (Sweden)

Yu. M. Zakharik

2005-01-01

Full Text Available The paper considers fundamentals of control electromagnet clutch drives. Mathematics dependence of electromagnet armature position is proposed and condition of stable drive operation is determined. Recommendations for selection of drive element characteristics are given in the paper.

Advertisement call and tadpole morphology of the clutch-guarding ...

African Journals Online (AJOL)

Advertisement call and tadpole morphology of the clutch-guarding frog Mantidactylus argenteus from eastern ... We provide the first descriptions of the tadpole and advertisement call of Mantidactylus argenteus. ... AJOL African Journals Online.

Evolution of parental incubation behaviour in dinosaurs cannot be inferred from clutch mass in birds.

Science.gov (United States)

Birchard, Geoffrey F; Ruta, Marcello; Deeming, D Charles

2013-08-23

A recent study proposed that incubation behaviour (i.e. type of parental care) in theropod dinosaurs can be inferred from an allometric analysis of clutch volume in extant birds. However, the study in question failed to account for factors known to affect egg and clutch size in living bird species. A new scaling analysis of avian clutch mass demonstrates that type of parental care cannot be distinguished by conventional allometry because of the confounding effects of phylogeny and hatchling maturity. Precociality of young but not paternal care in the theropod ancestors of birds is consistent with the available data.

A study of airborne chrysotile concentrations associated with handling, unpacking, and repacking boxes of automobile clutch discs.

Science.gov (United States)

Jiang, George C T; Madl, Amy K; Ingmundson, Kelsey J; Murbach, Dana M; Fehling, Kurt A; Paustenbach, Dennis J; Finley, Brent L

2008-06-01

Although automotive friction products (brakes and manual clutches) historically contained chrysotile asbestos, industrial hygiene surveys and epidemiologic studies of auto mechanics have consistently shown that these workers are not at an increased risk of developing asbestos-related diseases. Airborne asbestos levels during brake repair and brake parts handling have been well-characterized, but the potential exposure to airborne asbestos fibers during the handling of clutch parts has not been examined. In this study, breathing zone samples on the lapel of a volunteer worker (n=100) and area samples at bystander (n=50), remote area (n=25), and ambient (n=9) locations collected during the stacking, unpacking, and repacking of boxes of asbestos-containing clutches, and the subsequent cleanup and clothes handling, were analyzed by phase contrast microscopy (PCM) and transmission electron microscopy (TEM). In addition, fiber morphology and size distribution was evaluated using X-ray diffraction, polarized light microscopy, and ISO analytical methods. It was observed that the (1) airborne asbestos concentrations increased with the number of boxes unpacked and repacked, (2) repetitive stacking of unopened boxes of clutches resulted in higher asbestos concentrations than unpacking and repacking the boxes of clutches, (3) cleanup and clothes handling tasks yielded very low asbestos concentrations. Fiber size and morphology analyses showed that amphibole fibers were not detected in the clutches and that the vast majority (>95%) of the airborne chrysotile fibers were less than 20 microm in length. Applying the ratio of asbestos fibers:total fibers (including non-asbestos) as determined by TEM to the PCM results, it was found that 30-min average airborne chrysotile concentrations (PCM adjusted) were 0.026+/-0.004 f/cc or 0.100+/-0.017 f/cc for a worker unpacking and repacking 1 or 2 boxes of clutches, respectively. The 30-min PCM adjusted average airborne asbestos

Clutch pressure estimation for a power-split hybrid transmission using nonlinear robust observer

Science.gov (United States)

Zhou, Bin; Zhang, Jianwu; Gao, Ji; Yu, Haisheng; Liu, Dong

2018-06-01

For a power-split hybrid transmission, using the brake clutch to realize the transition from electric drive mode to hybrid drive mode is an available strategy. Since the pressure information of the brake clutch is essential for the mode transition control, this research designs a nonlinear robust reduced-order observer to estimate the brake clutch pressure. Model uncertainties or disturbances are considered as additional inputs, thus the observer is designed in order that the error dynamics is input-to-state stable. The nonlinear characteristics of the system are expressed as the lookup tables in the observer. Moreover, the gain matrix of the observer is solved by two optimization procedures under the constraints of the linear matrix inequalities. The proposed observer is validated by offline simulation and online test, the results have shown that the observer achieves significant performance during the mode transition, as the estimation error is within a reasonable range, more importantly, it is asymptotically stable.

Dynamics and stability of rigid rotors levitated by passive cylinder-magnet bearings and driven/supported axially by pointwise contact clutch

DEFF Research Database (Denmark)

Andersen, Søren Bøgh; Enemark, Søren; Santos, Ilmar

2013-01-01

A stable rotor—supported laterally by passive magnetic bearings and longitudinally by magnetic forces and a clutch—loses suddenly its contact to the clutch and executes abruptly longitudinal movements away from its original equilibrium position as a result of small increases in angular velocity...... by MCMB using several configurations of magnet distribution are described based on an accurate nonlinear model able to reliably reproduce the rotor-bearing dynamic behaviour. Such investigations lead to: (a) clear physical explanation about the reasons for the rotor's unstable behaviour, losing its...

Natural selection and inheritance of breeding time and clutch size in the collared flycatcher.

Science.gov (United States)

Sheldon, B C; Kruuk, L E B; Merilä, J

2003-02-01

Many characteristics of organisms in free-living populations appear to be under directional selection, possess additive genetic variance, and yet show no evolutionary response to selection. Avian breeding time and clutch size are often-cited examples of such characters. We report analyses of inheritance of, and selection on, these traits in a long-term study of a wild population of the collared flycatcher Ficedula albicollis. We used mixed model analysis with REML estimation ("animal models") to make full use of the information in complex multigenerational pedigrees. Heritability of laying date, but not clutch size, was lower than that estimated previously using parent-offspring regressions, although for both traits there was evidence of substantial additive genetic variance (h2 = 0.19 and 0.29, respectively). Laying date and clutch size were negatively genetically correlated (rA = -0.41 +/- 0.09), implying that selection on one of the traits would cause a correlated response in the other, but there was little evidence to suggest that evolution of either trait would be constrained by correlations with other phenotypic characters. Analysis of selection on these traits in females revealed consistent strong directional fecundity selection for earlier breeding at the level of the phenotype (beta = -0.28 +/- 0.03), but little evidence for stabilising selection on breeding time. We found no evidence that clutch size was independently under selection. Analysis of fecundity selection on breeding values for laying date, estimated from an animal model, indicated that selection acts directly on additive genetic variance underlying breeding time (beta = -0.20 +/- 0.04), but not on clutch size (beta = 0.03 +/- 0.05). In contrast, selection on laying date via adult female survival fluctuated in sign between years, and was opposite in sign for selection on phenotypes (negative) and breeding values (positive). Our data thus suggest that any evolutionary response to selection on

Clutch morphology and the timing of exposure impact the susceptibility of aquatic insect eggs to esfenvalerate.

Science.gov (United States)

Palmquist, Katherine R; Jenkins, Jeffrey J; Jepson, Paul C

2008-08-01

We investigated Baetis spp. (mayfly), Hesperoperla pacifica (stonefly), and Brachycentrus americanus (caddisfly) susceptibility at the egg stage to esfenvalerate, a synthetic pyrethroid insecticide. Eggs were obtained from the field or from field-collected gravid females at sites near Corvallis (OR, USA) and the Metolius River at Camp Sherman (OR, USA) for static exposures under controlled conditions for temperature and light. Eggs were exposed to esfenvalerate for 48 h at concentrations ranging from 0.025 to 4.0 microg/L. No effect on mortality or posthatch growth was detected in H. pacifica eggs exposed to esfenvalerate concentrations up to 1.0 microg/L. Exposure to 0.07 microg/L of esfenvalerate, however, caused a significant increase in Baetis spp. egg mortality, and exposure of near-eclosion eggs to lower concentrations (0.025 and 0.05 microg/L) resulted in behavioral effects and reduced survivorship in newly hatched Baetis nymphs. Early stage B. americanus eggs were 10-fold more sensitive to esfenvalerate when removed from the gelatinous clutch before exposure, an indication that the gelatin affords protection from toxicant exposure. Exposures of near-hatch B. americanus clutches to esfenvalerate concentrations ranging between 0.035 and 0.2 microg/L, however, resulted in significant clutch death within clutches resulting from behavioral aberrations of first-instar larvae. The results of the present study suggest that aquatic insect egg clutch morphology can be a strong influence on susceptibility of embryos to esfenvalerate exposure.

Peculiarities of Clutch Forming Rails and Wheel Block Construction

Science.gov (United States)

Shiler, V. V.; Galiev, I. I.; Shiler, A. V.

2018-03-01

The clutch of the wheel and rail is significantly influenced by the design features of the standard wheel pair, which are manifested in the presence of "parasitic" slipping of the wheels along the rails during its movement. The purpose of the presented work is to evaluate new design solutions for wheel sets. The research was carried out using methods of comparative simulation modelling and physical prototyping. A new design of the wheel pair (block wheel pair) is proposed, which features an independent rotation of all surfaces of the wheels in contact with the rails. The block construction of the wheel pair forms open mechanical contours with the track gauge, which completely eliminates the "parasitic" slippage. As a result, in the process of implementing traction or braking forces, the coupling coefficient of the block construction of the wheel pair is significantly higher than that of existing structures. In addition, in the run-out mode, the resistance to movement of the block wheel pair is half as much. All this will allow one to significantly reduce the energy consumption for traction of trains, wear of track elements and crew, and to increase the speed and safety of train traffic.

Clutches using engineering ceramics as friction material

Energy Technology Data Exchange (ETDEWEB)

Albers, A.; Arslan, A.; Mitariu, M. [Universitaet Karlsruhe (T.H.), IPEK - Institut fuer Produktentwicklung, Kaiserstr. 10, 76131 Karlsruhe (Germany)

2005-03-01

The experimental and constructive results illustrate that engineering ceramic materials have a high potential in the field of dry running friction systems. According to first estimations, it is possible to build the vehicle clutch 53 % smaller or to transmit up to 180 % higher torque with the same size by an appropriate selection of the system friction pairing and an adequate ceramic design [1, 2]. The friction coefficient characteristic (decreasing friction coefficient above sliding speed) is unfavourable with regard to comfort (self-induced grab oscillations [3]) of the vehicle clutch. Furthermore, it is important to select the test procedure of the experimental analyses to be as close to the system as possible in order to obtain exact information concerning the target system. (Abstract Copyright [2005], Wiley Periodicals, Inc.) [German] Die experimentellen und konstruktiven Ergebnisse haben gezeigt, dass ingenieurkeramische Werkstoffe ein hohes Potenzial im Bereich der trockenlaufenden Friktionssysteme haben. Durch geeignete Wahl der Systemreibpaarung und eine keramikgerechte Konstruktion ist es nach ersten Abschaetzungen moeglich, die Kfz-Kupplung um 53 % kleiner zu bauen bzw. bei gleicher Groesse bis zu 180 % hoehere Drehmomente zu uebertragen [1, 2]. Die Reibungszahlcharakteristik (fallende Reibungszahl ueber Gleitgeschwindigkeit) ist im Hinblick auf Komfort (selbsterregte Rupfschwingungen [3]) fuer die Kraftfahrzeugkupplung unguenstig. Des Weiteren ist es wichtig, die Versuchsfuehrung der experimentellen Untersuchungen so systemnah wie moeglich zu waehlen, um genauere Aussagen auf das Zielsystem zu erhalten. (Abstract Copyright [2005], Wiley Periodicals, Inc.)

Temperature and shear rate characteristics of electrorheological gel applied to a clutch

International Nuclear Information System (INIS)

Koyanagi, K; Takata, Y; Motoyoshi, T; Oshima, T; Kakinuma, Y; Anzai, H; Sakurai, K

2013-01-01

This investigation reports the physical characteristics of electrorheological (ER) gels, which are a type of functional material having controlled surface friction. We previously developed slip clutches using ER gels sandwiched between electrodes, and verified their responses and controllability. We newly report the temperature and shear rate characteristics of ER gel in this study because the input and output electrodes of the clutch continuously slip past each other. While the temperature of ER gels increased when energized, the shear stress hardly changed. Instead, wearing and adaptation to the electrode affect the property. The shear rate hardly affected the shear stress in the high-shear-rate region. Conversely, the shear stress depended on the shear rate in the lower region.

note on variable incubation period within a clutch of eggs

African Journals Online (AJOL)

Compo Biochem. Physiol. 53A: 1-6. MENDELSOHN, 1. M., BIGOS, H. C. & LEDGER, 1. A. In press. The biology of the black-shouldered. NOTE ON VARIABLE. INCUBATION PERIOD WITHIN A. CLUTCH OF EGGS OF THE. LEOPARD TORTOISE. (GEOCHELONE P ARDALIS). (CHELONIA: CRYPTODIRA: TESTUDINIDAE).

Optimal control of the gear shifting process for shift smoothness in dual-clutch transmissions

Science.gov (United States)

Li, Guoqiang; Görges, Daniel

2018-03-01

The control of the transmission system in vehicles is significant for the driving comfort. In order to design a controller for smooth shifting and comfortable driving, a dynamic model of a dual-clutch transmission is presented in this paper. A finite-time linear quadratic regulator is proposed for the optimal control of the two friction clutches in the torque phase for the upshift process. An integral linear quadratic regulator is introduced to regulate the relative speed difference between the engine and the slipping clutch under the optimization of the input torque during the inertia phase. The control objective focuses on smoothing the upshift process so as to improve the driving comfort. Considering the available sensors in vehicles for feedback control, an observer design is presented to track the immeasurable variables. Simulation results show that the jerk can be reduced both in the torque phase and inertia phase, indicating good shift performance. Furthermore, compared with conventional controllers for the upshift process, the proposed control method can reduce shift jerk and improve shift quality.

Switching sliding mode force tracking control of piezoelectric-hydraulic pump-based friction element actuation systems for automotive transmissions

Science.gov (United States)

Kim, Gi-Woo; Wang, K. W.

2009-08-01

In this study, a nonlinear sliding-mode controller is designed for force tracking of a piezoelectric-hydraulic pump (PHP)-based actuation system, which is developed to replace the current electro-hydraulic actuation systems for automatic transmission (AT) friction elements, such as band brakes or clutches. By utilizing the PHP, one can eliminate the various hydraulic components (oil pump, regulating valve and control valve) in current ATs and achieve a simpler configuration with more efficient operation. With the derived governing equation of motion of the PHP-based actuation system integrated with the friction element (band brake), a switching control law is synthesized based on the sliding-mode theory. To evaluate the effectiveness of the proposed control law, its force tracking performance for the engagement of a friction element during an AT 1\\to 2 up-shift is examined experimentally. It is shown that one can successfully track the desired force trajectory for AT shift control with small tracking error. This study demonstrates the potential of the PHP as a new controllable actuation system for AT friction elements.

Switching sliding mode force tracking control of piezoelectric-hydraulic pump-based friction element actuation systems for automotive transmissions

International Nuclear Information System (INIS)

Kim, Gi-Woo; Wang, K W

2009-01-01

In this study, a nonlinear sliding-mode controller is designed for force tracking of a piezoelectric-hydraulic pump (PHP)-based actuation system, which is developed to replace the current electro-hydraulic actuation systems for automatic transmission (AT) friction elements, such as band brakes or clutches. By utilizing the PHP, one can eliminate the various hydraulic components (oil pump, regulating valve and control valve) in current ATs and achieve a simpler configuration with more efficient operation. With the derived governing equation of motion of the PHP-based actuation system integrated with the friction element (band brake), a switching control law is synthesized based on the sliding-mode theory. To evaluate the effectiveness of the proposed control law, its force tracking performance for the engagement of a friction element during an AT 1→2 up-shift is examined experimentally. It is shown that one can successfully track the desired force trajectory for AT shift control with small tracking error. This study demonstrates the potential of the PHP as a new controllable actuation system for AT friction elements

Force loading explains spatial sensing of ligands by cells

Science.gov (United States)

Oria, Roger; Wiegand, Tina; Escribano, Jorge; Elosegui-Artola, Alberto; Uriarte, Juan Jose; Moreno-Pulido, Cristian; Platzman, Ilia; Delcanale, Pietro; Albertazzi, Lorenzo; Navajas, Daniel; Trepat, Xavier; García-Aznar, José Manuel; Cavalcanti-Adam, Elisabetta Ada; Roca-Cusachs, Pere

2017-12-01

Cells can sense the density and distribution of extracellular matrix (ECM) molecules by means of individual integrin proteins and larger, integrin-containing adhesion complexes within the cell membrane. This spatial sensing drives cellular activity in a variety of normal and pathological contexts. Previous studies of cells on rigid glass surfaces have shown that spatial sensing of ECM ligands takes place at the nanometre scale, with integrin clustering and subsequent formation of focal adhesions impaired when single integrin-ligand bonds are separated by more than a few tens of nanometres. It has thus been suggested that a crosslinking ‘adaptor’ protein of this size might connect integrins to the actin cytoskeleton, acting as a molecular ruler that senses ligand spacing directly. Here, we develop gels whose rigidity and nanometre-scale distribution of ECM ligands can be controlled and altered. We find that increasing the spacing between ligands promotes the growth of focal adhesions on low-rigidity substrates, but leads to adhesion collapse on more-rigid substrates. Furthermore, disordering the ligand distribution drastically increases adhesion growth, but reduces the rigidity threshold for adhesion collapse. The growth and collapse of focal adhesions are mirrored by, respectively, the nuclear or cytosolic localization of the transcriptional regulator protein YAP. We explain these findings not through direct sensing of ligand spacing, but by using an expanded computational molecular-clutch model, in which individual integrin-ECM bonds—the molecular clutches—respond to force loading by recruiting extra integrins, up to a maximum value. This generates more clutches, redistributing the overall force among them, and reducing the force loading per clutch. At high rigidity and high ligand spacing, maximum recruitment is reached, preventing further force redistribution and leading to adhesion collapse. Measurements of cellular traction forces and actin flow speeds

Use of statistical models based on radiographic measurements to predict oviposition date and clutch size in rock iguanas (Cyclura nubila)

International Nuclear Information System (INIS)

Alberts, A.C.

1995-01-01

The ability to noninvasively estimate clutch size and predict oviposition date in reptiles can be useful not only to veterinary clinicians but also to managers of captive collections and field researchers. Measurements of egg size and shape, as well as position of the clutch within the coelomic cavity, were taken from diagnostic radiographs of 20 female Cuban rock iguanas, Cyclura nubila, 81 to 18 days prior to laying. Combined with data on maternal body size, these variables were entered into multiple regression models to predict clutch size and timing of egg laying. The model for clutch size was accurate to 0.53 ± 0.08 eggs, while the model for oviposition date was accurate to 6.22 ± 0.81 days. Equations were generated that should be applicable to this and other large Cyclura species. © 1995 Wiley-Liss, Inc

Clutch size and parental effort in the Great Tit Parus major

NARCIS (Netherlands)

Verhulst, S.; Tinbergen, J.M.

1997-01-01

We experimentally reduced clutch size of Great Tits Parus major to investigate the effects on parental care (including Daily Energy Expenditure, DEE, measured with doubly labelled water), and the relationship between DEE and the residual reproductive value. The length of a working day was not

Comparison of ASSESS neutralization module results with actual small force engagement outcomes

International Nuclear Information System (INIS)

Gardner, B.H.; Snell, M.K.; Paulus, W.K.

1991-01-01

The ASSESS Neutralization module (Neutralization) is part of the Analytic System and Software for Evaluation of Safeguards and Security (ASSESS), a vulnerability assessment tool. Neutralization models a fire fight between security inspectors (SIs) and adversaries. This paper reports that a comparison has been made between actual outcomes of police and small military engagements and the results predicted by the Neutralization module for similar scenarios. The results of this comparison show a surprising correlation between predicted outcomes (based on numbers of combatants, weapon types, and exposures, etc.) and the actual outcomes of the engagements analyzed. The importance of this analysis is that given the defenders have intelligence on actual adversary characteristics or are protecting against a design basis threat, defense capabilities can be evaluated before an engagement. Results could then be used to develop a favorable probability of a desired outcome. For example, law enforcement agencies are frequently able to compile the number of criminals, types of weaponry, willingness to use force, etc., from analysis of crime scenes

Metabolic rate of nocturnal incubation in female great tits, Parus major, in relation to clutch size measured in a natural environment

NARCIS (Netherlands)

de Heij, Maaike E.; van der Graaf, Alexandra J.; Hafner, Dennis; Tinbergen, Joost M.

2007-01-01

To study the energetic costs of incubation in relation to clutch size, clutch sizes were manipulated and the metabolic rate of female great tits, Parus major (Linnaeus), during nocturnal incubation (MRinc) was measured using mobile oxygen analysers. Individuals were measured on consecutive nights

Applying Low-Frequency Vibration for the Experimental Investigation of Clutch Hub Forming

Directory of Open Access Journals (Sweden)

De’an Meng

2018-05-01

Full Text Available A vibration-assisted plastic-forming method was proposed, and its influence on clutch hub forming process was investigated. The experiments were conducted on a vibration-assisted hydraulic extrusion press with adjustable frequency and amplitude. Vibration frequency and amplitude were considered in investigating the effect of vibration on forming load and surface quality. Results showed that applying vibration can effectively reduce forming force and improve surface quality. The drop in forming load was proportional to the vibration frequency and amplitude, and the load decreased by up to 25%. Such reduction in forming load raised with amplitude increase because the increase in amplitude would accelerate punch relative speed, which then weakened the adhesion between workpiece and dies. By increasing the vibration frequency, the punch movement was enhanced, and the number of attempts to drag the lubricant out of the pits was increased. In this manner, the lubrication condition was improved greatly. The 3D surface topography testing confirmed the assumption. Moreover, vibration frequency exerted a more significant effect on the forming load reduction than vibration amplitude.

Circulating carotenoid concentrations are positively correlated with later clutch initiation in Florida Scrub-Jays (Aphelocoma coerulescens).

Science.gov (United States)

Heiss, Rebecca S; Cohen, Alan A; Bowman, Reed; Boughton, Raoul K; Bridge, Eli; McGraw, Kevin J; Schoech, Stephan J

2011-02-01

Antioxidants play key roles in preventing free radical damage to various molecules, cells, and tissues, but it is not well understood how variation in antioxidant levels may relate to the reproductive success or health of wild animals. We explored the relationship between circulating antioxidant concentrations and both body condition and timing of reproduction in male and female Florida Scrub-Jays (Aphelocoma coerulescens), a cooperatively breeding passerine bird. We examined whether levels of uric acid, vitamin E, and carotenoids (all potentially important antioxidants) were linked to body condition and timing of reproduction, two measures that are directly related to reproductive success. Antioxidant concentrations were not correlated with body condition, but they were related to timing of first clutch initiation, though not always in the predicted direction. Elevated circulating levels of carotenoids were associated with delayed clutch initiation in female breeders. Relatively higher vitamin E levels in control birds were associated with earlier clutch initiation, whereas male breeders that received long-term food supplementation had elevated levels of vitamin E and delayed reproduction. Several potential explanations for the link between elevated levels of antioxidants and delayed clutch initiation are discussed. Separate explanations for each sex include, but are not limited to, oxidative stress as a result of territory defense efforts in males, different dietary regimes due to supplementation, and mobilized plasma antioxidants in females that were coping with a stressor. © 2010 Wiley-Liss, Inc.

Infanticide and within-clutch competition select for reproductive synchrony in a cooperative bird.

Science.gov (United States)

Riehl, Christina

2016-08-01

Reproduction among members of social animal groups is often highly synchronized, but neither the selective advantages nor the proximate causes of synchrony are fully understood. Here I investigate the evolution of hatching synchrony in the Greater Ani (Crotophaga major), a communally nesting bird in which several unrelated females contribute eggs to a large, shared clutch. Hatching synchrony is variable, ranging from complete synchrony to moderate asynchrony, and is determined by the onset of incubation of the communal clutch. Data from a 10-year field study indicate that individual reproductive success is highest in synchronous groups, and that nestlings that hatch in the middle of the hatching sequence are most likely to survive. Nestling mortality is high in asynchronous clutches because early-hatching nestlings are more likely to be killed by adult group members, whereas late-hatching nestlings are more likely to starve due competition with their older nest-mates. Therefore, the timing of hatching appears to be under stabilizing selection from infanticide and resource competition acting in concert. These results provide empirical support for models predicting that synchrony may evolve as an adaptive counter-strategy to infanticide, and they highlight the importance of competition in shaping the timing of reproduction in social groups. © 2016 The Author(s). Evolution © 2016 The Society for the Study of Evolution.

Current Best Practices for Preventing Asbestos Exposure Among Brake and Clutch Repair Workers

Science.gov (United States)

Covers concerns about asbestos exposure for mechanics, how to tell if asbestos brake or clutch components contain asbestos, work practices to follow, protecting yourself for home mechanics, disposal of waste that contains asbestos.

Control system for a hybrid powertrain system

Science.gov (United States)

Naqvi, Ali K.; Demirovic, Besim; Gupta, Pinaki; Kaminsky, Lawrence A.

2014-09-09

A vehicle includes a powertrain with an engine, first and second torque machines, and a hybrid transmission. A method for operating the vehicle includes operating the engine in an unfueled state, releasing an off-going clutch which when engaged effects operation of the hybrid transmission in a first continuously variable mode, and applying a friction braking torque to a wheel of the vehicle to compensate for an increase in an output torque of the hybrid transmission resulting from releasing the off-going clutch. Subsequent to releasing the off-going clutch, an oncoming clutch which when engaged effects operation of the hybrid transmission in a second continuously variable mode is synchronized. Subsequent to synchronization of the oncoming clutch, the oncoming clutch is engaged.

Fuzzy Determination of Target Shifting Time and Torque Control of Shifting Phase for Dry Dual Clutch Transmission

Directory of Open Access Journals (Sweden)

Zhiguo Zhao

2014-01-01

Full Text Available Based on the independently developed five-speed dry dual clutch transmission (DDCT, the paper proposes the torque coordinating control strategy between engine and two clutches, which obtains engine speed and clutch transferred torque in the shifting process, adequately reflecting the driver intention and improving the shifting quality. Five-degree-of-freedom (DOF shifting dynamics model of DDCT with single intermediate shaft is firstly established according to its physical characteristics. Then the quantitative control objectives of the shifting process are presented. The fuzzy decision of shifting time and the model-based torque coordinating control strategy are proposed and also verified by simulating under different driving intentions in up-/downshifting processes with the DCT model established on the MATLAB/Simulink. Simulation results validate that the shifting control algorithm proposed in this paper can not only meet the shifting quality requirements, but also adapt to the various shifting intentions, having a strong robustness.

Two-stage actuation system using DC motors and piezoelectric actuators for controllable industrial and automotive brakes and clutches

Science.gov (United States)

Neelakantan, Vijay A.; Washington, Gregory N.; Bucknor, Norman K.

2005-05-01

High bandwidth actuation systems that are capable of simultaneously producing relatively large forces and displacements are required for use in automobiles and other industrial applications. Conventional hydraulic actuation mechanisms used in automotive brakes and clutches are complex, inefficient and have poor control robustness. These lead to reduced fuel economy, controllability issues and other disadvantages. This paper involves the design, development, testing and control of a two-stage hybrid actuation mechanism by combining classical actuators like DC motors and advanced smart material actuators like piezoelectric actuators. The paper also discusses the development of a robust control methodology using the Internal Model Control (IMC) principle and emphasizes the robustness property of this control methodology by comparing and studying simulation and experimental results.

Torque Control of a Rehabilitation Teaching Robot Using Magneto-Rheological Fluid Clutches

Science.gov (United States)

Hakogi, Hokuto; Ohaba, Motoyoshi; Kuramochi, Naimu; Yano, Hidenori

A new robot that makes use of MR-fluid clutches for simulating torque is proposed to provide an appropriate device for training physical therapy students in knee-joint rehabilitation. The feeling of torque provided by the robot is expected to correspond to the torque performance obtained by physical therapy experts in a clinical setting. The torque required for knee-joint rehabilitation, which is a function of the rotational angle and the rotational angular velocity of a knee movement, is modeled using a mechanical system composed of typical spring-mass-damper elements. The robot consists of two MR-fluid clutches, two induction motors, and a feedback control system. In the torque experiments, output torque is controlled using the spring and damper coefficients separately. The values of these coefficients are determined experimentally. The experimental results show that the robot would be suitable for training physical therapy students to experience similar torque feelings as needed in a clinical situation.

Optimal control of mode transition for four-wheel-drive hybrid electric vehicle with dry dual-clutch transmission

Science.gov (United States)

Zhao, Zhiguo; Lei, Dan; Chen, Jiayi; Li, Hangyu

2018-05-01

When the four-wheel-drive hybrid electric vehicle (HEV) equipped with a dry dual clutch transmission (DCT) is in the mode transition process from pure electrical rear wheel drive to front wheel drive with engine or hybrid drive, the problem of vehicle longitudinal jerk is prominent. A mode transition robust control algorithm which resists external disturbance and model parameter fluctuation has been developed, by taking full advantage of fast and accurate torque (or speed) response of three electrical power sources and getting the clutch of DCT fully involved in the mode transition process. Firstly, models of key components of driveline system have been established, and the model of five-degrees-of-freedom vehicle longitudinal dynamics has been built by using a Uni-Tire model. Next, a multistage optimal control method has been produced to realize the decision of engine torque and clutch-transmitted torque. The sliding-mode control strategy for measurable disturbance has been proposed at the stage of engine speed dragged up. Meanwhile, the double tracking control architecture that integrates the model calculating feedforward control with H∞ robust feedback control has been presented at the stage of speed synchronization. Finally, the results from Matlab/Simulink software and hardware-in-the-loop test both demonstrate that the proposed control strategy for mode transition can not only coordinate the torque among different power sources and clutch while minimizing vehicle longitudinal jerk, but also provide strong robustness to model uncertainties and external disturbance.

Density dependence of avian clutch size in resident and migrant species: is there a constraint on the predictability of competitor density?

NARCIS (Netherlands)

Both, C.

2000-01-01

The presence of density dependence of clutch size is tested in 57 long-term population studies of 10 passerine bird species. In about half of the studies of tit species Parus spp. density dependence of clutch size was found, while none was found in studies of two flycatcher species Ficedula spp. One

Design and analysis of the Gemini chain system in dual clutch transmission of automobile

Science.gov (United States)

Cheng, Yabing; Guo, Haitao; Fu, Zhenming; Wan, Nen; Li, Lei; Wang, Yang

2015-01-01

Chain drive system is widely used in the conditions of high-speed, overload, variable speed and load. Many studies are focused on the meshing theory and wear characteristics of chain drive system, but system design, analysis, and noise characteristics of the chain drive system are weak. System design and noise characteristic are studied for a new type Gemini chain of dual-clutch automatic transmission. Based on the meshing theory of silent chain, the design parameters of the Gemini chain system are calculated and the mathematical models and dynamic analysis models of the Gemini chain system are established. Dynamic characteristics of the Gemini chain system is simulated and the contact force of plate and pin, plate and sprockets, the chain tension forces, the transmission error and the stress of plates and pins are analyzed. According to the simulation results of the Gemini chain system, the noise experiment about system is carried out. The noise values are tested at different speed and load and spectral characteristics are analyzed. The results of simulation and experimental show that the contact forces of plate and pin, plate and sprockets are smaller than the allowable stress values, the chain tension force is less than ultimate tension and transmission error is limited in 1.2%. The noise values can meet the requirements of industrial design, and it is proved that the design and analysis method of the Gemini chain system is scientific and feasible. The design and test system is built from analysis to test of Gemini chain system. This research presented will provide a corresponding theoretical guidance for the design and dynamic characteristics and noise characteristics of chain drive system.

The First Salvo: Implications of Standing Rules of Engagement for U.S. Forces in Network-Centric Warfare

National Research Council Canada - National Science Library

Donnelly, Michael

2002-01-01

.... Information superiority, the capability for cooperatively engaged precision effects, and a responsive command and control architecture will enable commanders operating in NCW to preempt enemy forces...

Volume of eggs in the clutches of Grass snake Natrix natrix and Dice snake N. tessellata: error correction

Directory of Open Access Journals (Sweden)

Klenina Anastasiya Aleksandrovna

2015-12-01

Full Text Available The authors have made a mistake in calculating the volume of eggs in the clutches of snake family Natrix. In this article we correct the error. As a result, it was revealed, that the volume of eggs positively correlates with a female length and its mass, as well as with the quantity of eggs in the clutches. There is a positive correlation between the characteristics of newborn snakes (length and mass and the volume of eggs, from which they hatched.

Simulation model of an electrohydraulic-actuated double-clutch transmission vehicle: modelling and system design

Science.gov (United States)

Schoeftner, J.; Ebner, W.

2017-12-01

Automated and manual transmissions are the main link between engine and powertrain. The technical term when the transmission provides the desired torque during all possible driving conditions is denoted as powertrain matching. Recent developments in the last years show that double-clutch-transmissions (DCTs) are a reasonable compromise in terms of production costs, shifting quality, drivability and fuel efficiency. They have several advantages compared to other automatic transmissions (AT). Most DCTs nowadays consist of a hydraulic actuation control unit, which controls the clutches of the gearbox in order to induce a desired drivetrain torque into the driveline. The main functions of hydraulic systems are manifold: they initiate gear shifts, they provide sufficient oil for lubrication and they control the shift quality by suitably providing a desired oil flow or pressure for the clutch actuation. In this paper, a mathematical model of a passenger car equipped with a DCT is presented. The objective of this contribution is to get an increased understanding for the dynamics of the hydraulic circuit and its coupling to the vehicle drivetrain. The simulation model consists of a hydraulic and a mechanical domain: the hydraulic actuation circuit is described by nonlinear differential equations and includes the dynamics of the line pressure and the proportional valve, as well as the influence of the pressure reducing valve, pipe resistances and accumulator dynamics. The drivetrain with its gear ratios, moments of inertia, torsional stiffness of the rotating shafts and a simple longitudinal vehicle model represent the mechanical domain. The link between hydraulic and mechanical domain is given by the clutch, which combines hydraulic equations and Newton's laws. The presented mathematical model may not only be used as a simulation model for developing the transmission control software, it may also serve as a virtual layout for the design process phase. At the end of this

The multivariate egg: quantifying within- and among-clutch correlations between maternally derived yolk immunoglobulins and yolk androgens using multivariate mixed models.

Science.gov (United States)

Postma, Erik; Siitari, Heli; Schwabl, Hubert; Richner, Heinz; Tschirren, Barbara

2014-03-01

Egg components are important mediators of prenatal maternal effects in birds and other oviparous species. Because different egg components can have opposite effects on offspring phenotype, selection is expected to favour their mutual adjustment, resulting in a significant covariation between egg components within and/or among clutches. Here we tested for such correlations between maternally derived yolk immunoglobulins and yolk androgens in great tit (Parus major) eggs using a multivariate mixed-model approach. We found no association between yolk immunoglobulins and yolk androgens within clutches, indicating that within clutches the two egg components are deposited independently. Across clutches, however, there was a significant negative relationship between yolk immunoglobulins and yolk androgens, suggesting that selection has co-adjusted their deposition. Furthermore, an experimental manipulation of ectoparasite load affected patterns of covariance among egg components. Yolk immunoglobulins are known to play an important role in nestling immune defence shortly after hatching, whereas yolk androgens, although having growth-enhancing effects under many environmental conditions, can be immunosuppressive. We therefore speculate that variation in the risk of parasitism may play an important role in shaping optimal egg composition and may lead to the observed pattern of yolk immunoglobulin and yolk androgen deposition across clutches. More generally, our case study exemplifies how multivariate mixed-model methodology presents a flexible tool to not only quantify, but also test patterns of (co)variation across different organisational levels and environments, allowing for powerful hypothesis testing in ecophysiology.

Design optimization of clutch housing mold by fluid flow and solidification simulation

Energy Technology Data Exchange (ETDEWEB)

Hosseini, Seyedeh Maryam; Utlu, Zafer [Istanbul Aydin Univ., Istanbul (Turkmenistan)

2016-06-15

Aluminum die casting is so complex where flow momentum is critical matter in the mould filling process due the high velocity of the liquid metal. Actually, in complex parts the exact calculation of mould filling performance with using experimental knowledge is almost impossible. Aluminum die castings play a definitive role in the manufacturing of lightweight automobile bodies. Hence it is more essential today that these castings be produced with the high quality methods. In this condition the simulation is becoming more important in the designing procedure. This saves time and reduces the cost of the casting system design, which is an advantage of using simulation programs. Also, economical utilization of materials can be obtained when the quantity of test castings is decreased. This paper describes the advantages of the clutch housing die casting mold simulations to achieve better casting system design in High pressure die castings (HPDC). Filling analysis is used to determine the size and location of the gate as well as proper runner system design for ensuring a complete and balanced filling of the clutch housing part.

DETERMINATION ANALYSIS OF TEMPERATURE REGIMES, FUNCTIONAL CHARACTERISTICS AND SLIDING CURVES OF A HYDRODYNAMIC CLUTCH

Directory of Open Access Journals (Sweden)

Božidar V Krstić

2010-01-01

Full Text Available Analysis of output quality of power transmitters is possible in position when characteristics are determined earlier. This is the reason why we focused on determination of these characteristics for a concrete power hydro-transmitter. This means that the investigation task primarily consisted of determination of functional characteristics, defining of the sliding curves and temperature regimes of a concrete hydrodynamic clutch. Results of velocity and pressure field investigations in the working space of this clutch, obtained by use of the same test setup, are the basis for determination and analysis of the functional characteristics, sliding curves and temperature regimes. In this work we also analyzed function of the hydrodynamic transmitter in assembly with an internal combustion engine, as well as a process of acceleration and deceleration of a vehicle with this assembly in it.

A Study of Structural Stress Technique for Fracture Prediction of an Auto-Mobile Clutch Snap-Ring

International Nuclear Information System (INIS)

Kim, Ju Hee; Myeong, Man Sik; Oh, Chang Sik; Kim, Yun Jae

2016-01-01

The endurance reliability assessment of a highly complex mechanism is generally predicted by the fatigue life based on simple stress analysis. This study discusses various fatigue life assessment techniques for an automobile clutch snap ring. Finite element analyses were conducted to determine the structural stress on the snap ring. Structural stress that is insensitive in regards to the mesh size and type definition is presented in this study. The structural stress definition is consistent with elementary structural mechanics theory and provides an effective measure of a stress state that pertains to fatigue behavior of welded joints in the form of both membrane and bending components. Numerical procedures for both solid models and shell or plate element models are presented to demonstrate the mesh-size insensitivity when extracting the structural stress parameters. Conventional finite element models can be used with the structural stress calculations as a post-processing procedure. The two major implications from this research were: (a) structural stresses pertaining to fatigue behavior can be consistently calculated in a mesh-insensitive manner regardless of the types of finite element models; and (b) by comparing with the clutch snap-ring fatigue test data, we should predict the fatigue fractures of an automobile clutch snap ring using this method

On the correlation between the shape of eggs and their quantity in the clutches of Grass snake Natrix natrix (Linnaeus, 1758

Directory of Open Access Journals (Sweden)

Klenina Anastasia Alexandrovna

2014-12-01

Full Text Available Positive correlation between the quantity of eggs in clutch of the grass snake and their diameter as well as negative correlation between quantity of eggs and their length and between the diameter of eggs and their length was revealed. It was determined that the more the quantity of eggs in the clutch, the more they are rounded, that was explained by their deformation in accumulating in the oviduct.

Study on Oil Pressure Characteristics and Trajectory Tracking Control in Shift Process of Wet-Clutch for Electric Vehicles

Directory of Open Access Journals (Sweden)

Junqiu Li

2016-01-01

Full Text Available Accurate control of oil pressure of wet-clutch is of great importance for improving shift quality. Based on dynamic models of two-gear planetary transmission and hydraulic control system, a trajectory tracking model of oil pressure was built by sliding mode control method. An experiment was designed to verify the validity of hydraulic control system, through which the relationship between duty cycle of on-off valve and oil pressure of clutch was determined. The tracking effect was analyzed by simulation. Results showed that oil pressure could follow well the optimal trajectory and the shift quality was effectively improved.

Adaptive Tracking Control of an Electro-Pneumatic Clutch Actuator

Directory of Open Access Journals (Sweden)

Glenn-Ole Kaasa

2003-10-01

Full Text Available This paper deals with the application of a simple adaptive algorithm for robust tracking control of an electro-pneumatic clutch actuator with output feedback. We present a mathematical model of the strongly nonlinear system, and implement an adaptive algorithm, based on a parallel feedforward compensator (PFC to remove the relative-degree-1 restriction. We propose a practical method of constructing the PFC, and introduce a simple modification that removes an inherent restriction on bandwidth of the nonlinear system. We show that the adaptive algorithm deals well with nonlinearities, and we achieve tracking corresponding to a settling-time of 150 ms.

Wheeled Vehicle Clutches, Transmissions, and Transfers. Military Curriculum Materials for Vocational and Technical Education.

Science.gov (United States)

Army Ordnance Center and School, Aberdeen Proving Ground, MD.

This course is one of several subcourses that make up the entire Army correspondence course on wheeled vehicle maintenance. The subcourse is designed to provide the student with information about the operation, malfunction diagnosis, maintenance, and repair of wheeled vehicle clutches, transmissions, and transfer cases. It provides the basic…

Evaluation of asbestos exposure within the automotive repair industry: a study involving removal of asbestos-containing body sealants and drive clutch replacement.

Science.gov (United States)

Blake, Charles L; Dotson, G Scott; Harbison, Raymond D

2008-12-01

Two independent assessments were performed of airborne asbestos concentrations generated during automotive repair work on vintage vehicles . The first involved removal of asbestos-containing seam sealant, and the second involved servicing of a drive clutch. Despite the relatively high concentrations (5.6-28%) of chrysotile fibers detected within bulk samples of seam sealant, the average asbestos concentration for personal breathing zone (PBZ) samples during seam sealant removal was 0.006 f/cc (fibers/cubic centimeter of air). Many other air samples contained asbestos at or below the analytical limit of detection (LOD). Pneumatic chiseling of the sealant material during removal resulted in 69% of area air samples containing asbestos. Use of this impact tool liberated more asbestos than hand scraping. Asbestos fibers were only detected in air samples collected during the installation of a replacement clutch. The highest asbestos corrected airborne fiber concentration observed during clutch installation was 0.0028 f/cc. This value is approximately 100 times lower than Occupational Safety and Health Administration's (OSHA) permissible exposure limit (PEL) of 0.1f/cc. The airborne asbestos concentrations observed during the servicing of vintage vehicles with asbestos-containing seam sealant and clutches are comparable to levels reported for repair work involving brake components and gaskets.

Variation in clutch size in relation to nest size in birds

OpenAIRE

Moller Anders P.; Adriaensen Frank; Artemyev Alexandr; Banbura Jerzy; Barba Emilio; Biard Clotilde; Blondel Jacques; Bouslama Zihad; Bouvier Jean-Charles; Camprodon Jordi; Cecere Francesco; Charmantier Anne; Charter Motti; Cichon Mariusz; Cusimano Camillo

2014-01-01

© 2014 The Authors. Nests are structures built to support and protect eggs and/or offspring from predators, parasites, and adverse weather conditions. Nests are mainly constructed prior to egg laying, meaning that parent birds must make decisions about nest site choice and nest building behavior before the start of egg-laying. Parent birds should be selected to choose nest sites and to build optimally sized nests, yet our current understanding of clutch size-nest size relationships is limited...

Multiple breeding in the Great Tit, II. The costs of rearing a second clutch

NARCIS (Netherlands)

Verhulst, S.

1998-01-01

1. Multiple breeding (raising more than one batch of young per breeding season) is a common life-history tactic, but little is known as yet of the accompanying costs and benefits. Second clutches of Great Tits, a facultative multiple breeder, were removed over three years to investigate the costs of

Multiple breeding in the Great Tit, II. The costs of rearing a second clutch

NARCIS (Netherlands)

Verhulst, S

1. Multiple breeding (raising more than one batch of young per breeding season) is a common life-history tactic, but little is known as yet of the accompanying costs and benefits. Second clutches of Great Tits, a facultative multiple breeder, were removed over three years to investigate the costs of

Estimation of genetic variability and selection response for clutch length in dwarf brown-egg layers carrying or not the naked neck gene

Directory of Open Access Journals (Sweden)

Tixier-Boichard Michèle

2003-03-01

Full Text Available Abstract In order to investigate the possibility of using the dwarf gene for egg production, two dwarf brown-egg laying lines were selected for 16 generations on average clutch length; one line (L1 was normally feathered and the other (L2 was homozygous for the naked neck gene NA. A control line from the same base population, dwarf and segregating for the NA gene, was maintained during the selection experiment under random mating. The average clutch length was normalized using a Box-Cox transformation. Genetic variability and selection response were estimated either with the mixed model methodology, or with the classical methods for calculating genetic gain, as the deviation from the control line, and the realized heritability, as the ratio of the selection response on cumulative selection differentials. Heritability of average clutch length was estimated to be 0.42 ± 0.02, with a multiple trait animal model, whereas the estimates of the realized heritability were lower, being 0.28 and 0.22 in lines L1 and L2, respectively. REML estimates of heritability were found to decline with generations of selection, suggesting a departure from the infinitesimal model, either because a limited number of genes was involved, or their frequencies were changed. The yearly genetic gains in average clutch length, after normalization, were estimated to be 0.37 ± 0.02 and 0.33 ± 0.04 with the classical methods, 0.46 ± 0.02 and 0.43 ± 0.01 with animal model methodology, for lines L1 and L2 respectively, which represented about 30% of the genetic standard deviation on the transformed scale. Selection response appeared to be faster in line L2, homozygous for the NA gene, but the final cumulated selection response for clutch length was not different between the L1 and L2 lines at generation 16.

Clutch and egg allometry of the turtle Mauremys leprosa (Chelonia: Geoemydidae) from a polluted peri-urban river in west-central Morocco

Science.gov (United States)

Naimi, Mohamed; Znari, Mohammed; Lovich, Jeffrey E.; Feddadi, Youssef; Baamrane, Moulay Abdeljalil Ait

2012-01-01

We examined the relationships of clutch size (CS) and egg size to female body size (straight-line carapace length, CL) in a population of the turtle Mauremys leprosa from a polluted segment of oued (river) Tensift in arid west-central Morocco. Twenty-eight adult females were collected in May–July, 2009 and all were gravid. Each was weighed, measured, humanely euthanized and then dissected. Oviductal shelled eggs were removed, weighed (egg mass, EM) and measured for length (EL) and width (EW). Clutch mass (CM) was the sum of EM for a clutch. Pelvic aperture width (PAW) was measured at the widest point between the ilia bones through which eggs must pass at oviposition. The smallest gravid female had a CL of 124.0 mm. Mean CS was relatively large (9.7±2.0 eggs, range: 3–13) and may reflect high productivity associated with polluted (eutrophic) waters. Regression analyses were conducted using log-transformed data. CM increased isometrically with maternal body size. CS, EW and EM were all significantly hypoallometric in their relationship with CL. EL did not change significantly with increases in CL. EW increased at a hypoallometric rate with increasing CL but was unconstrained by PAW since the widest egg was smaller than the narrowest PAW measurement when excluding the three smallest females. Smaller females may have EW constrained by PAW. As females increase in size they increase both clutch size and egg width in contradiction to predictions of optimal egg size theory.

Engagement of the Slovak Armed Forces in Future Crisis Management Operations

Directory of Open Access Journals (Sweden)

Peter PINDJÁK

2014-09-01

Full Text Available During the past two decades, the Armed Forces of the Slovak Republic (AF SR have participated in more than thirty operations under major international organizations and coalitions. Despite the political interest to sustain active engagement of the AF SR in international crisis management operations, the declining level of capabilities coupled with the urgent need to modernize most of the military equipment compels the Slovak Ministry of Defense to commence a complex optimization process. Even though the evolving security environment continues to widen the spectrum of military capabilities, AF SR will need to prioritize and optimize their capabilities selectively. The defense planners must make sure that the AF SR will develop and maintain the necessary spectrum of capabilities required for the most likely deployment scenario. The optimization process should be conducted within a long-term conceptual plan that clearly defines the future course of the AF SR development within a limited financial frame. At the same time, the optimization endeavor must include a certain degree of flexibility that will allow for necessary adjustments based on specific operational requirements. In the end, the AF SR may become a modern and flexible instrument of power that could be engaged in crisis management operations abroad, upholding national and international interests effectively.

Collaborative engagement experiment (CEE)

Science.gov (United States)

Wade, Robert L.; Reames, Joseph M.

2005-05-01

Unmanned ground and air systems operating in collaboration have the potential to provide future Joint Forces a significant capability for operations in complex terrain. Ground and air collaborative engagements potentially offer force conservation, perform timely acquisition and dissemination of essential combat information, and can eliminate high value and time critical targets. These engagements can also add considerably to force survivability by reducing soldier and equipment exposure during critical operations. The Office of the Secretary of Defense, Joint Robotics Program (JRP) sponsored Collaborative Engagement Experiment (CEE) is a consolidation of separate Air Force, Army and Navy collaborative efforts to provide a Joint capability. The Air Force Research Laboratory (AFRL), Material and Manufacturing Directorate, Aerospace Expeditionary Force Division, Force Protection Branch (AFRLMLQF), The Army Aviation and Missile Research, Development and Engineering Center (AMRDEC) Joint Technology Center (JTC)/Systems Integration Laboratory (SIL), and the Space and Naval Warfare Systems Center-San Diego (SSC San Diego) are conducting technical research and proof of principle for an envisioned operational concept for extended range, three dimensional, collaborative operations between unmanned systems, with enhanced situational awareness for lethal operations in complex terrain. This program will assess information requirements and conduct experiments to identify and resolve technical risks for collaborative engagements using Unmanned Ground Vehicles (UGVs) and Unmanned Aerial Vehicles (UAVs). It will research, develop and physically integrate multiple unmanned systems and conduct live collaborative experiments. Modeling and Simulation systems will be upgraded to reflect engineering fidelity levels to greater understand technical challenges to operate as a team. This paper will provide an update of a multi-year program and will concentrate primarily on the JTC

Performance Investigation of A Mix Wind Turbine Using A Clutch Mechanism At Low Wind Speed Condition

Science.gov (United States)

Jamanun, M. J.; Misaran, M. S.; Rahman, M.; Muzammil, W. K.

2017-07-01

Wind energy is one of the methods that generates energy from sustainable resources. This technology has gained prominence in this era because it produces no harmful product to the society. There is two fundamental type of wind turbine are generally used this day which is Horizontal axis wind turbine (HAWT) and Vertical axis wind turbine (VAWT). The VAWT technology is more preferable compare to HAWT because it gives better efficiency and cost effectiveness as a whole. However, VAWT is known to have distinct disadvantage compared to HAWT; self-start ability and efficiency at low wind speed condition. Different solution has been proposed to solve these issues which includes custom design blades, variable angle of attack mechanism and mix wind turbine. A new type of clutch device was successfully developed in UMS to be used in a mix Savonius-Darrieus wind turbine configuration. The clutch system which barely audible when in operation compared to a ratchet clutch system interconnects the Savonius and Darrieus rotor; allowing the turbine to self-start at low wind speed condition as opposed to a standalone Darrieus turbine. The Savonius height were varied at three different size in order to understand the effect of the Savonius rotor to the mix wind turbine performance. The experimental result shows that the fabricated Savonius rotor show that the height of the Savonius rotor affecting the RPM for the turbine. The swept area (SA), aspect ratio (AR) and tip speed ratio (TSR) also calculated in this paper. The highest RPM recorded in this study is 90 RPM for Savonius rotor 0.22-meter height at 2.75 m/s. The Savonius rotor 0.22-meter also give the highest TSR for each range of speed from 0.75 m/s, 1.75 m/s and 2.75 m/s where it gives 1.03 TSR, 0.76 TSR, and 0.55 TSR.

Effects of sea ice on breeding numbers and clutch size of a high arctic population of the common eider Somateria mollissima

Science.gov (United States)

Mehlum, Fridtjof

2012-04-01

The breeding performance of high-arctic bird populations shows large inter-annual variation that may be attributed to environmental variability, such as the timing of snow melt and break-up of the landfast sea ice that surrounds breeding colonies on islands and along coasts. In the Kongsfjorden area (79°N) on Svalbard, the number of breeding pairs and the average egg clutch size vary considerably among years. In this study, data on breeding performance are presented from 15 years in the period 1981-2000. The results showed that early break-up of sea ice in Kongsfjorden resulted in larger numbers of nests and larger average clutch sizes than late break-up. Also, individual islands with early break-up of sea ice in a particular year had more nests and larger clutch sizes compared to other islands surrounded by sea ice during a longer period in spring. Thus, the inter-annual variation in the break-up of sea ice in the fjord has considerable implications for the inter-annual variability of recruitment to the population. The results indicate that the effects of global warming on changes in the sea ice melting regime in coastal regions are important for the reproductive output of island-nesting eiders.

Condition-dependent clutch desertion in Great Tit (Parus major) females subjected to human disturbance

OpenAIRE

2011-01-01

Abstract Nest desertion behaviour in relation to body condition and timing of breeding was studied in Great Tit (Parus major) females during two breeding seasons. Desertion, most likely unintentionally provoked by catching females during the incubation period, occurred at a very high rate with 41.2 and 25.6% of deserted first clutches in the two study years. The association between desertion probability, body condition (index calculated as residuals from the regression of body mass...

Investigation of tool engagement and cutting performance in machining a pocket

Science.gov (United States)

Adesta, E. Y. T.; Hamidon, R.; Riza, M.; Alrashidi, R. F. F. A.; Alazemi, A. F. F. S.

2018-01-01

This study investigates the variation of tool engagement for different profile of cutting. In addition, behavior of cutting force and cutting temperature for different tool engagements for machining a pocket also been explored. Initially, simple tool engagement models were developed for peripheral and slot cutting for different types of corner. Based on these models, the tool engagements for contour and zig zag tool path strategies for a rectangular shape pocket with dimension 80 mm x 60 mm were analyzed. Experiments were conducted to investigate the effect of tool engagements on cutting force and cutting temperature for the machining of a pocket of AISI H13 material. The cutting parameters used were 150m/min cutting speed, 0.05mm/tooth feed, and 0.1mm depth of cut. Based on the results obtained, the changes of cutting force and cutting temperature performance there exist a relationship between cutting force, cutting temperature and tool engagement. A higher cutting force and cutting temperature is obtained when the cutting tool goes through up milling and when the cutting tool makes a full engagement with the workpiece.

Carry-over effects of winter location contribute to variation in timing of nest initiation and clutch size in black brant (Branta bernicla nigricans)

Science.gov (United States)

Schamber, Jason L.; Sedinger, James S.; Ward, David H.

2012-01-01

We assessed carry-over effects from winter location on timing of nest initiation and clutch size of Black Brant (Branta bernicla nigricans) using observations of individually marked brant breeding at the Tutakoke River colony in Alaska, and wintering along a latitudinal gradient at three areas on the Pacific coast of Baja California: northernmost Bahia San Quintin (BSQ), Laguna Ojo de Liebre (LOL), and southernmost Laguna San Ignacio (LSI). Black Brant initiated nests according to a north—south trend in winter location, although year was a stronger predictor of initiation date than was wintering site. Female Black Brant that wintered at BSQ initiated nests 2.2 days earlier than females from LSI. Conversely, Black Brant showed only a weak south—north trend in clutch size; individuals from LSI laid slightly larger clutches than individuals from BSQ, probably because a smaller proportion of only high-quality females from the southernmost wintering area in Baja California were able to attain the nutritional condition necessary to breed. These results indicate that winter location can influence individual reproductive performance and, potentially, limit population growth of southern segments of the wintering Black Brant population.

Analysis and Design of a Permanent Magnet Bi-Stable Electro-Magnetic Clutch Unit for In-Wheel Electric Vehicle Drives

Directory of Open Access Journals (Sweden)

Wanli Cai

2015-06-01

Full Text Available Clutches have been used in internal combustion vehicles and concentrated electric vehicles (EVs to smoothen impulsion while starting and shifting. This paper proposes a permanent magnet bi-stable electromagnetic clutch unit (PMBECU which is specially introduced into in-wheel EVs to make the rigid connection between hub and wheel more flexible. Firstly, the operation principle of the PMBECU is illustrated. Then, the basic magnetic circuit model is presented and analyzed, followed by optimal design of the main structural parameters by investigating the PM leakage flux coefficient. Further, according to the basic electromagnetic characteristics of the PMBECU, the current pulse supply is put forward, and the minimum pulse width which enables the operation of the PMBECU and its dynamic characteristics are analyzed by an improved finite element method. Finally, a prototype machine is manufactured and tested to validate all the analysis results.

Interspecific variation in the relationship between clutch size, laying date and intensity of urbanization in four species of hole-nesting birds.

Science.gov (United States)

Vaugoyeau, Marie; Adriaensen, Frank; Artemyev, Alexandr; Bańbura, Jerzy; Barba, Emilio; Biard, Clotilde; Blondel, Jacques; Bouslama, Zihad; Bouvier, Jean-Charles; Camprodon, Jordi; Cecere, Francesco; Charmantier, Anne; Charter, Motti; Cichoń, Mariusz; Cusimano, Camillo; Czeszczewik, Dorota; Demeyrier, Virginie; Doligez, Blandine; Doutrelant, Claire; Dubiec, Anna; Eens, Marcel; Eeva, Tapio; Faivre, Bruno; Ferns, Peter N; Forsman, Jukka T; García-Del-Rey, Eduardo; Goldshtein, Aya; Goodenough, Anne E; Gosler, Andrew G; Grégoire, Arnaud; Gustafsson, Lars; Harnist, Iga; Hartley, Ian R; Heeb, Philipp; Hinsley, Shelley A; Isenmann, Paul; Jacob, Staffan; Juškaitis, Rimvydas; Korpimäki, Erkki; Krams, Indrikis; Laaksonen, Toni; Lambrechts, Marcel M; Leclercq, Bernard; Lehikoinen, Esa; Loukola, Olli; Lundberg, Arne; Mainwaring, Mark C; Mänd, Raivo; Massa, Bruno; Mazgajski, Tomasz D; Merino, Santiago; Mitrus, Cezary; Mönkkönen, Mikko; Morin, Xavier; Nager, Ruedi G; Nilsson, Jan-Åke; Nilsson, Sven G; Norte, Ana C; Orell, Markku; Perret, Philippe; Perrins, Christopher M; Pimentel, Carla S; Pinxten, Rianne; Richner, Heinz; Robles, Hugo; Rytkönen, Seppo; Senar, Juan Carlos; Seppänen, Janne T; Pascoal da Silva, Luis; Slagsvold, Tore; Solonen, Tapio; Sorace, Alberto; Stenning, Martyn J; Tryjanowski, Piotr; von Numers, Mikael; Walankiewicz, Wieslaw; Møller, Anders Pape

2016-08-01

The increase in size of human populations in urban and agricultural areas has resulted in considerable habitat conversion globally. Such anthropogenic areas have specific environmental characteristics, which influence the physiology, life history, and population dynamics of plants and animals. For example, the date of bud burst is advanced in urban compared to nearby natural areas. In some birds, breeding success is determined by synchrony between timing of breeding and peak food abundance. Pertinently, caterpillars are an important food source for the nestlings of many bird species, and their abundance is influenced by environmental factors such as temperature and date of bud burst. Higher temperatures and advanced date of bud burst in urban areas could advance peak caterpillar abundance and thus affect breeding phenology of birds. In order to test whether laying date advance and clutch sizes decrease with the intensity of urbanization, we analyzed the timing of breeding and clutch size in relation to intensity of urbanization as a measure of human impact in 199 nest box plots across Europe, North Africa, and the Middle East (i.e., the Western Palearctic) for four species of hole-nesters: blue tits (Cyanistes caeruleus), great tits (Parus major), collared flycatchers (Ficedula albicollis), and pied flycatchers (Ficedula hypoleuca). Meanwhile, we estimated the intensity of urbanization as the density of buildings surrounding study plots measured on orthophotographs. For the four study species, the intensity of urbanization was not correlated with laying date. Clutch size in blue and great tits does not seem affected by the intensity of urbanization, while in collared and pied flycatchers it decreased with increasing intensity of urbanization. This is the first large-scale study showing a species-specific major correlation between intensity of urbanization and the ecology of breeding. The underlying mechanisms for the relationships between life history and

Institutional Level Student Engagement and Organisational Cultures

Science.gov (United States)

van der Velden, Gwen

2012-01-01

Driven by the growing presence of market forces within higher education worldwide, universities are changing the way they engage with students. This article explores how a university's internal culture relates to engagement with students and their views. It builds on wider research into student engagement and organisational cultures. The…

Electronic control of a 4-speed automatic transmission with lock-up clutch

Energy Technology Data Exchange (ETDEWEB)

Schwab, M.

1984-01-01

The paper describes the electronic control of an automatic 4-speed transmission with lock-up clutch. As compared to purely hydraulically controlled transmissions, this control offers a clearly improved quality of shifting and the possibility of achieving improvements in fuel consumption thanks to a special economy program. The electronic control unit is a Bosch MOTRONIC which has been expanded to include the functions of transmission control. A special feature is the engine torque control which is implemented by way of retarding the ignition when shifting. This opens up an additional degree of freedom for optimizing a transmission in terms of shift comfort, life of the friction elements and the power which can be transmitted.

Force modeling for incisions into various tissues with MRF haptic master

Science.gov (United States)

Kim, Pyunghwa; Kim, Soomin; Park, Young-Dai; Choi, Seung-Bok

2016-03-01

This study proposes a new model to predict the reaction force that occurs in incisions during robot-assisted minimally invasive surgery. The reaction force is fed back to the manipulator by a magneto-rheological fluid (MRF) haptic master, which is featured by a bi-directional clutch actuator. The reaction force feedback provides similar sensations to laparotomy that cannot be provided by a conventional master for surgery. This advantage shortens the training period for robot-assisted minimally invasive surgery and can improve the accuracy of operations. The reaction force modeling of incisions can be utilized in a surgical simulator that provides a virtual reaction force. In this work, in order to model the reaction force during incisions, the energy aspect of the incision process is adopted and analyzed. Each mode of the incision process is classified by the tendency of the energy change, and modeled for realistic real-time application. The reaction force model uses actual reaction force information with three types of actual tissues: hard tissue, medium tissue, and soft tissue. This modeled force is realized by the MRF haptic master through an algorithm based on the position and velocity of a scalpel using two different control methods: an open-loop algorithm and a closed-loop algorithm. The reaction forces obtained from the proposed model are compared with a desired force in time domain.

Force modeling for incisions into various tissues with MRF haptic master

International Nuclear Information System (INIS)

Kim, Pyunghwa; Kim, Soomin; Park, Young-Dai; Choi, Seung-Bok

2016-01-01

This study proposes a new model to predict the reaction force that occurs in incisions during robot-assisted minimally invasive surgery. The reaction force is fed back to the manipulator by a magneto-rheological fluid (MRF) haptic master, which is featured by a bi-directional clutch actuator. The reaction force feedback provides similar sensations to laparotomy that cannot be provided by a conventional master for surgery. This advantage shortens the training period for robot-assisted minimally invasive surgery and can improve the accuracy of operations. The reaction force modeling of incisions can be utilized in a surgical simulator that provides a virtual reaction force. In this work, in order to model the reaction force during incisions, the energy aspect of the incision process is adopted and analyzed. Each mode of the incision process is classified by the tendency of the energy change, and modeled for realistic real-time application. The reaction force model uses actual reaction force information with three types of actual tissues: hard tissue, medium tissue, and soft tissue. This modeled force is realized by the MRF haptic master through an algorithm based on the position and velocity of a scalpel using two different control methods: an open-loop algorithm and a closed-loop algorithm. The reaction forces obtained from the proposed model are compared with a desired force in time domain. (paper)

Within-Clutch Variation in Yolk Testosterone as an Adaptive Maternal Effect to Modulate Avian Sibling Competition : Evidence from a Comparative Study

NARCIS (Netherlands)

Muller, Martina; Groothuis, Ton G. G.; Bronstein, Judith L.; Demas, Greg

In many species, embryos are exposed to maternal hormones in utero, in the egg, or in the seed. In birds, mothers deposit substantial testosterone into their eggs, which enhances competitive ability of offspring. These maternal testosterone concentrations vary systematically within clutches in

Characterization of sliders for efficient force generation of electrostatically controlled linear actuator

International Nuclear Information System (INIS)

Nguyen, T A; Konishi, S

2014-01-01

In this paper, the characterization of sliders for efficient force generation of an electrostatically controlled linear actuator (ECLIA) is investigated. The ECLIA consists of a piezoactuator (PZT), driving and holding electrodes, multiple sliders and a guide structure. The stepping motion of the sliders is driven by the PZT actuator via an electrostatic clutch mechanism. Thus, multiple sliders can achieve parallel, independent, precise motion, and a large stroke. Previous studies have indicated that the Si bulk slider and Si electrode created an air gap owing to the deformation of the Si electrode. Thus, the Si slider generated a low pushing force. In this study, we propose a fishbone structure mounted on a flexible slider to enhance the pushing force of the slider. The flexible slider, that can deform and fit into the Si electrode to reduce the air gap, results in highly efficient electrostatic-force generation. The fishbone structure improves the longitudinal stiffness of the flexible slider for high pushing-force generation. The results show that the pushing force created by the fishbone slider was three times greater than that of the conventional Si slider. The fishbone and flexible sliders exhibited a high performance for the ECLIA. (paper)

Simulacioni model višelamelastih frikcionih sklopova / Simulation model of multiple plate friction clutches and brakes

Directory of Open Access Journals (Sweden)

Aleksandar Grkić

2009-01-01

Full Text Available Višelamelasti frikcioni sklopovi koriste se za promenu stepena prenosa u planetarnim menjačkim prenosnicima motornih vozila. Razvijeni simulacioni model frikcione spojnice i kočnice omogućava simulaciju rada menjačkog prenosnika pri promeni stepena prenosa. Primenom razvijenog modela moguće je na bazi simulacije analizirati prelazni proces pri promeni stepena prenosa i obezbediti identifikaciju relevantnih parametara bez izrade većeg broja fizičkih prototipova. Na taj način obezbeđuje se smanjenje troškova i skraćenje procesa razvoja novih prenosnika snage, uz poboljšanje upotrebnog kvaliteta. Simulacioni model može da se koristi i pri razvoju upravljačkog sistema menjačkog prenosnika za definisanje potrebnih karakteristika njegovih komponenata. / Multiple plate friction clutches and brakes are used for gear shifting within planetary gear trains of motor vehicles. The developed simulation model of the friction clutch and brake enables the simulation and the analysis of the planetary gear train transitional processes during gear shifting and provides identification of relevant parameters without making numerous physical prototypes. Costs are thus reduced and time for developing new gear trains shortened, while the product quality is increased. The simulation model can be use additionally in developing steering systems of planetary gear trains for defining characteristics of their components.

Device for forced lowering of pipes into a well

Energy Technology Data Exchange (ETDEWEB)

Kutepov, A.I.; Fedotov, I.N.; Prokopov, O.I.

1982-01-01

A device is proposed for forced lowering of pipes into a well which includes a load-lifting unit with boom, winch and cable of the block and tackle system, elevator, fixed and mobile tool grab coils, of which the latter is connected by tie cables to the drum of its drive and the reverse cables through rollers with weight-counterweights. In order to reduce metal consumption and to improve convenient operation, the drum of the drive of the mobile tool grab coil is connected to the winch shaft through a clutch and the rollers of the weights-counterweights are installed on the boom of the load-lifting unit in the plane of the block and tackle system.

Nonlinear gearshifts control of dual-clutch transmissions during inertia phase.

Science.gov (United States)

Hu, Yunfeng; Tian, Lu; Gao, Bingzhao; Chen, Hong

2014-07-01

In this paper, a model-based nonlinear gearshift controller is designed by the backstepping method to improve the shift quality of vehicles with a dual-clutch transmission (DCT). Considering easy-implementation, the controller is rearranged into a concise structure which contains a feedforward control and a feedback control. Then, robustness of the closed-loop error system is discussed in the framework of the input to state stability (ISS) theory, where model uncertainties are considered as the additive disturbance inputs. Furthermore, due to the application of the backstepping method, the closed-loop error system is ordered as a linear system. Using the linear system theory, a guideline for selecting the controller parameters is deduced which could reduce the workload of parameters tuning. Finally, simulation results and Hardware in the Loop (HiL) simulation are presented to validate the effectiveness of the designed controller. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

Apparatus producing constant cable tension for intermittent demand

Science.gov (United States)

Lauritzen, Ted

1985-01-01

The disclosed apparatus produces constant tension in superconducting electrical cable, or some other strand, under conditions of intermittent demand, as the cable is unreeled from a reel or reeled thereon. The apparatus comprises a pivotally supported swing frame on which the reel is rotatably supported, a rotary motor, a drive train connected between the motor and the reel and including an electrically controllable variable torque slip clutch, a servo transducer connected to the swing frame for producing servo input signals corresponding to the position thereof, a servo control system connected between the transducer and the clutch for regulating the torque transmitted by the clutch to maintain the swing frame in a predetermined position, at least one air cylinder connected to the swing frame for counteracting the tension in the cable, and pressure regulating means for supplying a constant air pressure to the cylinder to establish the constant tension in the cable, the servo system and the clutch being effective to produce torque on the reel in an amount sufficient to provide tension in the cable corresponding to the constant force exerted by the air cylinder. The drive train also preferably includes a fail-safe brake operable to its released position by electrical power in common with the servo system, for preventing rotation of the reel if there is a power failure. A shock absorber and biasing springs may also be connected to the swing frame, such springs biasing the frame toward its predetermined position. The tension in the cable may be measured by force measuring devices engageable with the bearings for the reel shaft, such bearings being supported for slight lateral movement. The reel shaft is driven by a Shmidt coupler which accommodates such movement.

Apparatus producing constant cable tension for intermittent demand

International Nuclear Information System (INIS)

Lauritzen, T.

1985-01-01

The disclosed apparatus produces constant tension in superconducting electrical cable, or some other strand, under conditions of intermittent demand, as the cable is unreeled from a reel or reeled thereon. The apparatus comprises a pivotally supported swing frame on which the reel is rotatably supported, a rotary motor, a drive train connected between the motor and the reel and including an electrically controllable variable torque slip clutch, a servo transducer connected to the swing frame for producing servo input signals corresponding to the position thereof, a servo control system connected between the transducer and the clutch for regulating the torque transmitted by the clutch to maintain the swing frame in a predetermined position, at least one air cylinder connected to the swing frame for counteracting the tension in the cable, and pressure regulating means for supplying a constant air pressure to the cylinder to establish the constant tension in the cable, the servo system and the clutch being effective to produce torque on the reel in an amount sufficient to provide tension in the cable corresponding to the constant force exerted by the air cylinder. The drive train also preferably includes a fail-safe brake operable to its released position by electrical power in common with the servo system, for preventing rotation of the reel if there is a power failure. A shock absorber and biasing springs may also be connected to the swing frame, such springs biasing the frame toward its predetermined position. The tension in the cable may be measured by force measuring devices engageable with the bearings for the reel shaft, such bearings being supported for slight lateral movement. The reel shaft is driven by a Shmidt coupler which accommodates such movement

Improvement in thrust force estimation of solenoid valve considering minor hysteresis loop

Directory of Open Access Journals (Sweden)

Myung-Hwan Yoon

2017-05-01

Full Text Available Solenoid valve is a very important hydraulic actuator for an automatic transmission in terms of shift quality. The same form of pressure for the clutch and the input current are required for an ideal control. However, the gap between a pressure and a current can occur which brings a delay in a transmission and a decrease in quality. This problem is caused by hysteresis phenomenon. As the ascending or descending magnetic field is applied to the solenoid, different thrust forces are generated. This paper suggests the calculation method of the thrust force considering the hysteresis phenomenon and consequently the accurate force can be obtained. Such hysteresis occurs in ferromagnetic materials, however the hysteresis phenomenon includes a minor hysteresis loop which begins with an initial magnetization curve and is generated by DC biased field density. As the core of the solenoid is ferromagnetic material, an accurate thrust force is obtained by applying the minor hysteresis loop compared to the force calculated by considering only the initial magnetization curve. An analytical background and the detailed explanation of measuring the minor hysteresis loop are presented. Furthermore experimental results and finite element analysis results are compared for the verification.

Squamate hatchling size and the evolutionary causes of negative offspring size allometry.

Science.gov (United States)

Meiri, S; Feldman, A; Kratochvíl, L

2015-02-01

Although fecundity selection is ubiquitous, in an overwhelming majority of animal lineages, small species produce smaller number of offspring per clutch. In this context, egg, hatchling and neonate sizes are absolutely larger, but smaller relative to adult body size in larger species. The evolutionary causes of this widespread phenomenon are not fully explored. The negative offspring size allometry can result from processes limiting maximal egg/offspring size forcing larger species to produce relatively smaller offspring ('upper limit'), or from a limit on minimal egg/offspring size forcing smaller species to produce relatively larger offspring ('lower limit'). Several reptile lineages have invariant clutch sizes, where females always lay either one or two eggs per clutch. These lineages offer an interesting perspective on the general evolutionary forces driving negative offspring size allometry, because an important selective factor, fecundity selection in a single clutch, is eliminated here. Under the upper limit hypotheses, large offspring should be selected against in lineages with invariant clutch sizes as well, and these lineages should therefore exhibit the same, or shallower, offspring size allometry as lineages with variable clutch size. On the other hand, the lower limit hypotheses would allow lineages with invariant clutch sizes to have steeper offspring size allometries. Using an extensive data set on the hatchling and female sizes of > 1800 species of squamates, we document that negative offspring size allometry is widespread in lizards and snakes with variable clutch sizes and that some lineages with invariant clutch sizes have unusually steep offspring size allometries. These findings suggest that the negative offspring size allometry is driven by a constraint on minimal offspring size, which scales with a negative allometry. © 2014 European Society For Evolutionary Biology. Journal of Evolutionary Biology © 2014 European Society For Evolutionary

Trained and Ready Combat Forces: The Role of Training Devices in Sustaining Combat Force Proficiency During Deployments

National Research Council Canada - National Science Library

Taylor, James

1997-01-01

... (MOOTW). The Army's ground combat forces, even while engaged in MOOTW activities, must maintain proficiency to wage war in the event that peacetime engagement, deterrence and conflict prevention fail...

Collaborative engagement experiment

Science.gov (United States)

Mullens, Katherine; Troyer, Bradley; Wade, Robert; Skibba, Brian; Dunn, Michael

2006-05-01

Unmanned ground and air systems operating in collaboration have the potential to provide future Joint Forces a significant capability for operations in complex terrain. Collaborative Engagement Experiment (CEE) is a consolidation of separate Air Force, Army and Navy collaborative efforts within the Joint Robotics Program (JRP) to provide a picture of the future of unmanned warfare. The Air Force Research Laboratory (AFRL), Material and Manufacturing Directorate, Aerospace Expeditionary Force Division, Force Protection Branch (AFRL/MLQF), The Army Aviation and Missile Research, Development and Engineering Center (AMRDEC) Joint Technology Center (JTC)/Systems Integration Laboratory (SIL), and the Space and Naval Warfare Systems Center - San Diego (SSC San Diego) are conducting technical research and proof of principle experiments for an envisioned operational concept for extended range, three dimensional, collaborative operations between unmanned systems, with enhanced situational awareness for lethal operations in complex terrain. This paper describes the work by these organizations to date and outlines some of the plans for future work.

Choking vs. clutch performance: a study of sport performance under pressure.

Science.gov (United States)

Otten, Mark

2009-10-01

Choking research in sport has suggested that an athlete's tendency to choke, versus give a better than usual (i.e., "clutch") performance depends on his or her personality, as well as on situational influences, such as a reliance on explicit (versus implicit) knowledge when pressured. The current study integrated these hypotheses and tested a structural equation model (SEM) to predict sport performance under pressure. Two hundred and one participants attempted two sets of 15 basketball free throws, and were videotaped during their second set of shots as a manipulation of pressure. Results of the model suggest that "reinvesting" attention in the task leads to greater anxiety (cognitive and somatic), which then predicts a higher level of self-focus; self-focus, then, did not lead to improved performance under pressure, whereas feelings of self-reported "perceived control" did help performance. Implications for measurement of these constructs, and their relationships with performance, are discussed.

What Future for Student Engagement in Neo-Liberal Times?

Science.gov (United States)

Zepke, Nick

2015-01-01

The paper first examines the context that has given student engagement a very strong profile in higher education. It identifies neo-liberalism as the driving force in the present higher education context and argues that student engagement enjoys an elective affinity with it. While neo-liberalism is dominant, student engagement will be strong. But…

Design of a 7-DOF haptic master using a magneto-rheological devices for robot surgery

Science.gov (United States)

Kang, Seok-Rae; Choi, Seung-Bok; Hwang, Yong-Hoon; Cha, Seung-Woo

2017-04-01

This paper presents a 7 degrees-of-freedom (7-DOF) haptic master which is applicable to the robot-assisted minimally invasive surgery (RMIS). By utilizing a controllable magneto-rheological (MR) fluid, the haptic master can provide force information to the surgeon during surgery. The proposed haptic master consists of three degrees motions of X, Y, Z and four degrees motions of the pitch, yaw, roll and grasping. All of them have force feedback capability. The proposed haptic master can generate the repulsive forces or torques by activating MR clutch and MR brake. Both MR clutch and MR brake are designed and manufactured with consideration of the size and output torque which is usable to the robotic surgery. A proportional-integral-derivative (PID) controller is then designed and implemented to achieve torque/force tracking trajectories. It is verified that the proposed haptic master can track well the desired torque and force occurred in the surgical place by controlling the input current applied to MR clutch and brake.

RELEVANCE OF RELIGIOUS LEADER ENGAGEMENT FOR THE AIR FORCE CHAPLAIN CORPS

Science.gov (United States)

2015-12-01

organizations. They are ordained religious leaders who have been set them aside to do sacred works. Furthermore, as Navy Chaplain George Adams writes...AU/ACSC/CHAE, C/AY16 AIR COMMAND AND STAFF COLLEGE AIR UNIVERSITY RELEVANCE OF RELIGIOUS LEADER ENGAGEMENT FOR THE...agent of Religious Leader Engagement on deployments in an informal manner. As the nature of warfare continues to evolve toward a non-traditional

Digital Politics: Mobilization, Engagement, and Participation

OpenAIRE

Koc-Michalska, K.; Lilleker, Darren

2017-01-01

The article provides insights into the driving forces that underpin new forms of political participation. Digital technologies offer opportunities for engaging in a wide range of civicallyoriented activities, each of which can contribute to deeper democratic engagement. Conventional acts of political participation are argued to be driven primarily by intrinsic motivations relating to self-efficacy and empowerment with participants feeling they can have influence over decision makers. Little r...

Liaisons as Sales Force: Using Sales Techniques to Engage Academic Library Users

Directory of Open Access Journals (Sweden)

Nathaniel King

2017-01-01

Full Text Available In Brief Liaison librarians are assuming a wide variety of new roles that serve their institutions’ students, staff, and faculty. An essential foundation of these new roles is the ability to engage with the liaison’s user community. These engagement skills are not necessarily natural or innate, nor are they skills that most liaison librarians have had an opportunity to learn and develop. This article adapts a practical selling framework for the liaison context with examples that demonstrate how this framework can lead to improved communication, engagement, and problem-solving with liaison user communities.

High Interspecimen Variability in Engagement of the Anterolateral Ligament: An In Vitro Cadaveric Study.

Science.gov (United States)

Kent, Robert N; Boorman-Padgett, James F; Thein, Ran; van der List, Jelle P; Nawabi, Danyal H; Wickiewicz, Thomas L; Imhauser, Carl W; Pearle, Andrew D

2017-10-01

Anterolateral ligament (ALL) reconstruction as an adjunct to anterior cruciate ligament (ACL) reconstruction remains a subject of clinical debate. This uncertainty may be driven in part by a lack of knowledge regarding where, within the range of knee motion, the ALL begins to carry force (engages). (1) Does the ALL engage in the ACL-intact knee; and (2) where within the range of anterior tibial translation occurring in the ACL-sectioned knee does the ALL engage? A robotic manipulator was used to measure anterior tibial translation, ACL forces, and ALL forces in 10 fresh-frozen cadaveric knees (10 donors; mean age, 41 ± 16 years; range, 20-64 years; eight male) in response to applied multiplanar torques. The engagement point of the ALL was defined as the anterior tibial translation at which the ALL began to carry at least 15% of the force carried by the native ACL; a threshold of 15% minimized the sensitivity of the engagement point of the ALL. This engagement point was compared with the maximum anterior tibial translation permitted in the ACL-intact condition using a paired Wilcoxon signed-rank test (p position and tension at which lateral extraarticular grafts and tenodeses are fixed might be able to be tuned to control where within the range of knee motion the graft tissue is engaged to restrain joint motion on a patient-specific basis.

"Rekindle and Recapture the Love": Establishing System-Wide Indicators of Progress in Community Engagement and Economic Development

Science.gov (United States)

Janke, Emily M.

2014-01-01

In May 2012, University of North Carolina (UNC) President Tom Ross simultaneously commissioned two task forces to develop indicators that all UNC campuses could use to measure "progress in community engagement and economic development." The charge to the Community Engagement Task Force and the Economic Development Task Force was to…

The Role of Counter-Face Roughness on the Tribological Performance of a Clutch System Tested with a Pin-On-Disc Tribometer

Directory of Open Access Journals (Sweden)

Graciliano Fernandes

2016-05-01

Full Text Available This study was a continuous investigation of the roles played by the tribofilm on dry automotive clutch system performance. Tribological experiments were performed by the addition of wear debris at the beginning of tribometer tests and by reducing the surface roughness of a cast iron counter-face. The initial surface conditions of cast discs were 0.2 and 1.2 µm. The pin-on-disc tests were carried out at three different PV levels: 3.08, 7.88, and 10.09 MPa·ms−1, and the current results were correlated to those previously obtained in the standard tribometer procedure. When the wear debris was added into the tribosystem, the friction coefficient level dropped drastically while the assembly wear rate rose. In contrast, the modified cast discs provided a reduced wear rate of assembly and a higher and more stable friction coefficient level. These improvements were obtained in a severe condition where higher temperature levels were reached. For the tests with added debris, SEM observations revealed a more intense tribofilm development over the worn surfaces of the clutch friction material. The smoothest cast disc did not damage the developed tribofilms and maintained them more stably due to a reduction in contact area stresses at the highest tribometer test.

Assessment of circumferential cracks in hypereutectic Al-Si clutch housings

Directory of Open Access Journals (Sweden)

M. Haghshenas

2017-04-01

Full Text Available As in situ natural composites with silicon phase acting as the reinforcing phase, Al-Si alloys are among most commonly used aluminum alloys in automotive applications (i.e. engine component. Silicon contributes to the strength of Al-Si alloys through load transfer from the Al matrix to the hard (rigid Si phase in the microstructure (load-carrying capacity. Casting parameters (i.e. solidification rate, elemental segregation, secondary dendrite spacing… as well as the size and distribution of the microstructural constituents in Al-Si alloys (i.e. morphology of Si particles, intermetallic compounds, secondary dendrite spacing contribute directly to the mechanical response and failure (or fracture behavior of the alloy within the service. In hyper-eutectic Al-Si alloys (i.e. B390.0, distribution of coarse pre-eutectic Si particle mainly contribute to stress concentration, crack initiation and propagation during the actual service condition. In the present paper, the parameters contribution to the formation of the circumferential cracks in clutch housings made of die cast hyper-eutectics B390.0 Al-Si alloys are assessed through optical microscopy and scanning electron microscopy. Casting variable, cooling rate, their effect on the cracks as well some of the possible causes are also discussed in detail.

Nuclear reactor control and shutdown device with limited travel

International Nuclear Information System (INIS)

Mehren, F.; Blombach, J.; Kretzen, H.H.

1984-01-01

The clutch for an absorber rod held in the closed position by an electromagnet with an armature is angled so that with uncontrolled lifting the clutch can be disengaged if the holding magnet current has not been removed. A switch bar controlling the clutch and connected to the magnet armature is provided with cams, which when the highest permitted end position is reached run up against a stop ring. Continuous lifting pulls the armature from the magnet by force. The relative movement produced between the switch bar and the drive bar open the clutch, and the absorber rod can fall into the fission zone. (orig./HP) [de

Einrichtung zur Überwachung der Eingriffspunkte getrennt angeordneter Kupplungs-Bremssysteme

OpenAIRE

Schuetz, H.G.

1980-01-01

DD 138168 A UPAB: 19940205 The monitor is for clutches and brakes of separately located systems; esp. single disc clutches and brakes on presses and shears. The switch points of the systems are determined by control of their actuators, while the contact points are determined by the switch points, friction forces, in the actuators, and the actuating path. The friction disc (6, 7) of the clutch (1) and brake (2) have facing pairs of transmitters. An additional pair of transmitters is positioned...

Power and Reciprocity in Partnerships: Deliberative Civic Engagement and Transformative Learning in Community-Engaged Scholarship

Science.gov (United States)

Davis, Katherine L.; Kliewer, Brandon W.; Nicolaides, Aliki

2017-01-01

The purpose of this work is to assist partners in identifying, naming, and facilitating dynamic relational forces and learning processes that shape the effectiveness of community engagement practice and partnerships. We offer a hypothetical case to assist in framing and discussing concepts of reciprocity and power in partnerships and how these…

32 CFR 632.4 - Deadly force.

Science.gov (United States)

2010-07-01

..., is substantially important to national security. (See paragraph (b) of this section.) (iii) Escape of... security or an essential national defense mission. (2) Substantially important to national security based... INVESTIGATIONS USE OF FORCE BY PERSONNEL ENGAGED IN LAW ENFORCEMENT AND SECURITY DUTIES § 632.4 Deadly force. (a...

Engagement and Implications for Future National Security Strategies: Can the Services Adapt

National Research Council Canada - National Science Library

Hodge, Michael

2000-01-01

...: mission profiles beyond the design of US armed forces, debate over the role of US armed forces within an "engagement" construct, debate over the future nature of US Security Policy and doctrinal...

Experimental Investigation on The Electromagnetic Clutch Water pump and Pneumatic Compressor for Improving the Efficiency of an Engine

Science.gov (United States)

Kumarasubramanian, R.; Xavier, Goldwin; Nishanthi, W. Mary; Rajasekar, R.

2017-05-01

Considering the fuel crises today many work and research were conducted to reduce the fuel consumption of the internal combustion engine. The fuel consumption of an internal combustion engine can be relatively reduced by use of the electromagnetic clutch water pump and pneumatic compressor. Normally in an engine, the water pump is driven by the crankshaft, with an aid of belt, for the circulation of the water for the cooling process. The circulation of coolant is resisted by the thermostat valve, while the temperature inside the coolant jacket of the engine is below 375K the thermostat is closed only above 375K it tends to open. But water pump run continuously even when thermostat is closed. In pneumatic braking system, pneumatic or air compressor purpose is to compress the air and stored into the storage tank for the brake operation. When the air pressure of the storage tanks gets increases above its storage capacity pressure is regulated by governor, by passing them to atmosphere. Such unnecessary work of this water pump and air compressor can be minimized by use of the electromagnetic clutch water pump and air compressor. The European Driving Cycle is used to evaluate the performance of this water pump and air compressor when used in an engine. The result shows that the fuel economy of the engine while using electromagnetic water pump and pneumatic compressor were improved by 8.0% compared with conventional types which already exist. The application of these electromagnetic water pump and pneumatic compressor are expected to contribute for the improvement of engine performance because of their effect in reduction of the rate of fuel consumption.

Kinetics of full scrum and staggered scrum engagement in under 19 ...

African Journals Online (AJOL)

Two hundred and eight male Rugby Union players from 13 high schools, whose ages ranged from 16 to 19 years, were used to examine the kinetics of the full scrum versus staggered scrum engagement techniques. Telemetric pressure transducers were used to measure the engagement and sustained forces acting on the ...

Engaging environmental turbulence : Drivers of organizational flexibility in the armed forces

NARCIS (Netherlands)

de Waard, E.; Volberda, H.W.; Soeters, J.M.M.L.

2013-01-01

Since the transformation was set in motion to change Western armed forces from large-scale mechanized defensive organizations into smaller agile expeditionary crisis response forces, the call for organizational flexibility has rocketed. Yet, actual research into the key organizational drivers of

Engagement techniques and playing level impact the biomechanical demands on rugby forwards during machine-based scrummaging.

Science.gov (United States)

Preatoni, Ezio; Stokes, Keith A; England, Michael E; Trewartha, Grant

2015-04-01

This cross-sectional study investigated the factors that may influence the physical loading on rugby forwards performing a scrum by studying the biomechanics of machine-based scrummaging under different engagement techniques and playing levels. 34 forward packs from six playing levels performed repetitions of five different types of engagement techniques against an instrumented scrum machine under realistic training conditions. Applied forces and body movements were recorded in three orthogonal directions. The modification of the engagement technique altered the load acting on players. These changes were in a similar direction and of similar magnitude irrespective of the playing level. Reducing the dynamics of the initial engagement through a fold-in procedure decreased the peak compression force, the peak downward force and the engagement speed in excess of 30%. For example, peak compression (horizontal) forces in the professional teams changed from 16.5 (baseline technique) to 8.6 kN (fold-in procedure). The fold-in technique also reduced the occurrence of combined high forces and head-trunk misalignment during the absorption of the impact, which was used as a measure of potential hazard, by more than 30%. Reducing the initial impact did not decrease the ability of the teams to produce sustained compression forces. De-emphasising the initial impact against the scrum machine decreased the mechanical stresses acting on forward players and may benefit players' welfare by reducing the hazard factors that may induce chronic degeneration of the spine. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Clutch size variation in Tawny Owls (Strix aluco) from adjacent valley systems: can this be used as a surrogate to investigate temporal and spatial variations in vole density?

Science.gov (United States)

Steve J. Petty; Billy L. Fawkes

1997-01-01

Research on Tawny Owls (Strix aluco) in Kielder Forest, northern England, since 1981 demonstrated that field voles (Microtus agrestis) were their most important food. Here, field voles exhibited a 3-4 year cycle of abundance, and mean clutch size in Tawny Owls was significantly related to vole abundance in March. In this analysis...

Modeling of automotive driveline system for reducing gear rattles

Science.gov (United States)

Shangguan, Wen-Bin; Liu, Xue-Lai; Yin, Yuming; Rakheja, Subhash

2018-03-01

A nonlinear torsional model for a driveline system with 4 degrees of freedom is proposed for studying gear rattle if a car is at idle. The time-varying meshing stiffness of geared teeth, gear backlash, and the damping from oil film are included in the model. The dynamic responses of the driveline system, such as clutch angular displacement, meshing force and relative displacement between geared teeth, are calculated using the presented model. The influences of stiffness and damping of a clutch on gear rattle of geared teeth in a generic transmission are investigated. Based on the calculation and analysis results, a design guideline to select clutch's stiffness and damping is developed to reduce gear rattle for a car at idle. Taking a generic driveline system of a passenger car as an example, the developed method is experimentally validated by comparing the baseline clutch and revised clutch, in terms of the measured noise inside engine compartment and cab and vibrations at transmission housing.

``Force,'' ontology, and language

Science.gov (United States)

Brookes, David T.; Etkina, Eugenia

2009-06-01

We introduce a linguistic framework through which one can interpret systematically students’ understanding of and reasoning about force and motion. Some researchers have suggested that students have robust misconceptions or alternative frameworks grounded in everyday experience. Others have pointed out the inconsistency of students’ responses and presented a phenomenological explanation for what is observed, namely, knowledge in pieces. We wish to present a view that builds on and unifies aspects of this prior research. Our argument is that many students’ difficulties with force and motion are primarily due to a combination of linguistic and ontological difficulties. It is possible that students are primarily engaged in trying to define and categorize the meaning of the term “force” as spoken about by physicists. We found that this process of negotiation of meaning is remarkably similar to that engaged in by physicists in history. In this paper we will describe a study of the historical record that reveals an analogous process of meaning negotiation, spanning multiple centuries. Using methods from cognitive linguistics and systemic functional grammar, we will present an analysis of the force and motion literature, focusing on prior studies with interview data. We will then discuss the implications of our findings for physics instruction.

Experimentally reducing clutch size reveals a fixed upper limit to egg size in snakes, evidence from the king ratsnake, Elaphe carinata.

Science.gov (United States)

Ji, Xiang; Du, Wei-Guo; Li, Hong; Lin, Long-Hui

2006-08-01

Snakes are free of the pelvic girdle's constraint on maximum offspring size, and therefore present an opportunity to investigate the upper limit to offspring size without the limit imposed by the pelvic girdle dimension. We used the king ratsnake (Elaphe carinata) as a model animal to examine whether follicle ablation may result in enlargement of egg size in snakes and, if so, whether there is a fixed upper limit to egg size. Females with small sized yolking follicles were assigned to three manipulated, one sham-manipulated and one control treatments in mid-May, and two, four or six yolking follicles in the manipulated females were then ablated. Females undergoing follicle ablation produced fewer, but larger as well as more elongated, eggs than control females primarily by increasing egg length. This finding suggests that follicle ablation may result in enlargement of egg size in E. carinata. Mean values for egg width remained almost unchanged across the five treatments, suggesting that egg width is more likely to be shaped by the morphological feature of the oviduct. Clutch mass dropped dramatically in four- and six-follicle ablated females. The function describing the relationship between size and number of eggs reveals that egg size increases with decreasing clutch size at an ever-decreasing rate, with the tangent slope of the function for the six-follicle ablation treatment being -0.04. According to the function describing instantaneous variation in tangent slope, the maximum value of tangent slope should converge towards zero. This result provides evidence that there is a fixed upper limit to egg size in E. carinata.

A novel design procedure for tractor clutch fingers by using optimization and response surface methods

Energy Technology Data Exchange (ETDEWEB)

Dogan, Oguz; Karpat, Fatih; Yuce, Celalettin; Kaya, Necmettin; Yavuz, Nurettin [Uludag University, Gorukle (Turkmenistan); Sen, Hasan [Valeo A. S., Bursa (Turkmenistan)

2016-06-15

This paper presents a methodology for re-designing a failed tractor transmission component subjected to cyclic loading. Unlike other vehicles, tractors cope with tough working conditions. Thus, it is necessary to re-design components by using modern optimization techniques. To extend their service life, we present a design methodology for a failed tractor clutch power take-off finger. The finger was completely re-designed using topology and shape optimization approach. Stress-life based fatigue analyses were performed. Shape optimization and response surface methodology were conducted to obtain optimum dimensions of the finger. Two design parameters were selected for the design of experiment method and 15 cases were analyzed. By using design of the experiment method, three responses were obtained: Maximum stresses, mass, and displacement depending on the selected the design parameters. After solving the optimization problem, we achieved a maximum stress and mass reduction of 14% and 6%, respectively. The stiffness was improved up to 31.6% compared to the initial design.

Mobile ankle and knee perturbator.

Science.gov (United States)

Andersen, Jacob Buus; Sinkjaer, Thomas

2003-10-01

A mobile ankle and knee perturbator has been developed. It consists of a functional joint with an integrated clutch. Four Bowden wires connect the joint to a powerful motor and a double pneumatic cylinder. When needed during any time of the gait cycle, it is possible to impose an ankle rotation by engaging the clutch and rotating the ankle or knee joint with a predefined displacement. The system is designed to investigate electrophysiological and biomechanical features of the human ankle or knee joint during gait.

Mechanical design of a free-wheel clutch for the thermal engine of a parallel hybrid vehicle with thermal and electrical power-train; Conception mecanique d'un accouplement a roue libre pour le moteur thermique d'un vehicule hybride parallele thermique et electrique

Energy Technology Data Exchange (ETDEWEB)

Santin, J.J.

2001-07-01

This thesis deals with the design of a free-wheel clutch. This unit is intended to replace the automated dry single-plate clutch of a parallel hybrid car with thermal and electric power-train. Furthermore, the car is a single shaft zero emission vehicle fitted with a controlled gearbox. Chapter one focuses on the type of hybrid vehicle studied. It shows the need to isolate the engine from the rest of the drive train, depending on the driving conditions. Chapter two presents and compares the two alternatives: automated clutch and free-wheel. In order to develop the free-wheel option, the torsional vibrations in the automotive drive line had to be closely studied. It required the design of a specific modular tool, as presented in chapter three, with the help of MATLAB SIMULINK. Lastly, chapter four shows how this tool was used during the design stage and specifies the way to build it. The free-wheel is then to be fitted to a prototype hybrid vehicle, constructed by both the LAMIH and PSA. (author)

Job satisfaction, occupational stress, burnout and work engagement as components of work-related wellbeing

Directory of Open Access Journals (Sweden)

Sebastiaan Rothmann

2008-11-01

Full Text Available The objective of this study was to investigate the relationship between job satisfaction, occupational stress, burnout and work engagement as dimensions of work-related wellbeing in a sample of members of the police force in South Africa. A survey design was used. Stratifed random samples of members of the police force (N = 677 were taken in the North West Province of South Africa. The Minnesota Job Satisfaction Questionnaire, Police Stress Inventory, Maslach Burnout Inventory – General Survey and Utrecht Work Engagement Scale were used as measuring instruments. The results provided support for a four-factorial model of work-related wellbeing consisting of the following dimensions: job satisfaction (indicating pleasure vs. displeasure, occupational stress (indicating anxiety vs. comfort, burnout (indicating fatigue vs. vigour, and engagement (indicating enthusiasm vs. depression.

Space and Air Force: Rhetoric or Reality

National Research Council Canada - National Science Library

Cashin, James

1999-01-01

... to meet requirements set forth in the National Security Strategy (NSS). Joint Vision 2010, the Air Force's Global Engagement, and several long-range plans all establish requirements that can only be fulfilled through the application of spacepower...

Analysis of Air Force Civil Engineering Strategic Planning

National Research Council Canada - National Science Library

Mondo, Francis

2003-01-01

Several organizations within the Department of Defense, including the Air Force Civil Engineer, are actively engaged in strategic planning in an effort to create a roadmap for future capabilities and performance...

Three-Dimensional Finite Element Analysis on Stress Distribution of Internal Implant-Abutment Engagement Features.

Science.gov (United States)

Cho, Sung-Yong; Huh, Yun-Hyuk; Park, Chan-Jin; Cho, Lee-Ra

To investigate the stress distribution in an implant-abutment complex with a preloaded abutment screw by comparing implant-abutment engagement features using three-dimensional finite element analysis (FEA). For FEA modeling, two implants-one with a single (S) engagement system and the other with a double (D) engagement system-were placed in the human mandibular molar region. Two types of abutments (hexagonal, conical) were connected to the implants. Different implant models (a single implant, two parallel implants, and mesial and tilted distal implants with 1-mm bone loss) were assumed. A static axial force and a 45-degree oblique force of 200 N were applied as the sum of vectors to the top of the prosthetic occlusal surface with a preload of 30 Ncm in the abutment screw. The von Mises stresses at the implant-abutment and abutment-screw interfaces were measured. In the single implant model, the S-conical abutment type exhibited broader stress distribution than the S-hexagonal abutment. In the double engagement system, the stress concentration was high in the lower contact area of the implant-abutment engagement. In the tilted implant model, the stress concentration point was different from that in the parallel implant model because of the difference in the bone level. The double engagement system demonstrated a high stress concentration at the lower contact area of the implant-abutment interface. To decrease the stress concentration, the type of engagement features of the implant-abutment connection should be carefully considered.

Research on Gear Shifting Process without Disengaging Clutch for a Parallel Hybrid Electric Vehicle Equipped with AMT

Directory of Open Access Journals (Sweden)

Hui-Long Yu

2014-01-01

Full Text Available Dynamic models of a single-shaft parallel hybrid electric vehicle (HEV equipped with automated mechanical transmission (AMT were described in different working stages during a gear shifting process without disengaging clutch. Parameters affecting the gear shifting time, components life, and gear shifting jerk in different transient states during a gear shifting process were deeply analyzed. The mathematical models considering the detailed synchronizer working process which can explain the gear shifting failure, long time gear shifting, and frequent synchronizer failure phenomenon in HEV were derived. Dynamic coordinated control strategy of the engine, motor, and actuators in different transient states considering the detailed working stages of synchronizer in a gear shifting process of a HEV is for the first time innovatively proposed according to the state of art references. Bench test and real road test results show that the proposed control strategy can improve the gear shifting quality in all its evaluation indexes significantly.

CRDM with separate SCRAM latch engagement and locking

Energy Technology Data Exchange (ETDEWEB)

Dodd, Christopher D.; DeSantis, Paul K.; Stambaugh, Kevin J.; Mackovjak, Allan R.; McLaughlin, John P.; Goodyear, Brett T.; Edwards, Michael J.; Ales, Matthew W.

2018-01-09

A control rod drive mechanism (CRDM) configured to latch onto the lifting rod of a control rod assembly and including separate latch engagement and latch holding mechanisms. A CRDM configured to latch onto the lifting rod of a control rod assembly and including a four-bar linkage closing the latch, wherein the four-bar linkage biases the latch closed under force of gravity.

The everyday violence of forced displacement : community, memory and identity politics among Kurdish internal forced migrants in Turkey

NARCIS (Netherlands)

Geerse, M.T.

2011-01-01

Kurds in Turkey: the everyday violence of their forced displacement. Roughly fifteen years ago, more than one million Kurds were forcibly displaced from their villages in Southeast Turkey, mostly by Turkish security troops, who were engaged in a violent struggle with the PKK, an armed organization

Dynamic Coordinated Shifting Control of Automated Mechanical Transmissions without a Clutch in a Plug-In Hybrid Electric Vehicle

Directory of Open Access Journals (Sweden)

Xinlei Liu

2012-08-01

Full Text Available On the basis of the shifting process of automated mechanical transmissions (AMTs for traditional hybrid electric vehicles (HEVs, and by combining the features of electric machines with fast response speed, the dynamic model of the hybrid electric AMT vehicle powertrain is built up, the dynamic characteristics of each phase of shifting process are analyzed, and a control strategy in which torque and speed of the engine and electric machine are coordinatively controlled to achieve AMT shifting control for a plug-in hybrid electric vehicle (PHEV without clutch is proposed. In the shifting process, the engine and electric machine are well controlled, and the shift jerk and power interruption and restoration time are reduced. Simulation and real car test results show that the proposed control strategy can more efficiently improve the shift quality for PHEVs equipped with AMTs.

Working through resistance in engaging boys and men towards gender equality and progressive masculinities

Science.gov (United States)

Ratele, Kopano

2015-01-01

Over the last two decades, a focus on challenging and transforming dominant forms of masculinity and engaging boys and men towards gender equality and healthy masculinities has permeated South African social and health sciences and the humanities. This focus on men and boys has also been evident in intervention and activist work. However, the turn to boys, men and masculinities has not gone without resistance, contestation and contradictions. A range of localised and global realities has frustrated much of the enthusiasm for rapid, sweeping and concrete changes regarding gender justice and the making of progressive masculinities. Among the discursive and material forces that oppose work that engages boys and men are those to do with income-related issues, race and racism, cultural traditions and gender itself. Because of this, it is contended that engagement with boys and men needs to consider not only gender but also economic inequality, poverty and unemployment, divisions created by race, and struggles around tradition. This paper discusses these forces that undermine and counteract work with boys and men and how we might work through resistance in engaging with men and boys. PMID:26073936

Working through resistance in engaging boys and men towards gender equality and progressive masculinities.

Science.gov (United States)

Ratele, Kopano

2015-01-01

Over the last two decades, a focus on challenging and transforming dominant forms of masculinity and engaging boys and men towards gender equality and healthy masculinities has permeated South African social and health sciences and the humanities. This focus on men and boys has also been evident in intervention and activist work. However, the turn to boys, men and masculinities has not gone without resistance, contestation and contradictions. A range of localised and global realities has frustrated much of the enthusiasm for rapid, sweeping and concrete changes regarding gender justice and the making of progressive masculinities. Among the discursive and material forces that oppose work that engages boys and men are those to do with income-related issues, race and racism, cultural traditions and gender itself. Because of this, it is contended that engagement with boys and men needs to consider not only gender but also economic inequality, poverty and unemployment, divisions created by race, and struggles around tradition. This paper discusses these forces that undermine and counteract work with boys and men and how we might work through resistance in engaging with men and boys.

Resonant difference-frequency atomic force ultrasonic microscope

Science.gov (United States)

Cantrell, John H. (Inventor); Cantrell, Sean A. (Inventor)

2010-01-01

A scanning probe microscope and methodology called resonant difference-frequency atomic force ultrasonic microscopy (RDF-AFUM), employs an ultrasonic wave launched from the bottom of a sample while the cantilever of an atomic force microscope, driven at a frequency differing from the ultrasonic frequency by one of the contact resonance frequencies of the cantilever, engages the sample top surface. The nonlinear mixing of the oscillating cantilever and the ultrasonic wave in the region defined by the cantilever tip-sample surface interaction force generates difference-frequency oscillations at the cantilever contact resonance. The resonance-enhanced difference-frequency signals are used to create images of nanoscale near-surface and subsurface features.

Mark-recapture and behavioral ecology: a case study of Cliff Swallows

Directory of Open Access Journals (Sweden)

Brown, C. R.

2004-06-01

Full Text Available Mark–recapture and the statistical analysis methods associated with it offer great potential for investigating fitness components associated with particular behavioral traits. However, few behavioral ecologists have used these techniques. We illustrate the insights that have come from a long–term mark–recapture study of social behavior in Cliff Swallows (Petrochelidon pyrrhonota. The number of transient swallows passing through a colony per hour increased with colony size and was responsible in part for increased rates of ectoparasite introduction from outside the group into the larger colonies. Annual survival probabilities of males engaging in extra–pair copulation attempts were lower than those of males not seen to commit extra–pair copulations, suggesting that males who engage in this behavior may be inferior individuals and that females do not benefit from copulating with them. Females engaging in intraspecific brood parasitism had higher annual survival probabilities than ones either parasitized by others or not known to be either hosts or parasites. This suggests that parasitic females are high–quality birds and that brood parasitism is an effective reproductive tactic for increasing their fitness. By estimating first–year survival of chicks, we found that a clutch size of 4 eggs is often the most productive, on average, as measured by recruitment of offspring as breeders, although birds laying the more uncommon clutch size of 5 fledge more young on average. This helps to explain the observed clutch–size distribution in which clutch size 4 is the most commonly produced.

Filtering informal learning in everyday life: invoking ordinariness and moving to civic engagement

OpenAIRE

Grummell, Bernie

2010-01-01

This article explores the role of informal learning from television as it is anchored within the ordinariness of daily life. It examines the consequences for pedagogy and civic engagement, questioning how informal learning from television can enhance civic engagement. For many, this learning was localized through personalized and interpersonal relations of everyday life. Learning was not viewed as a distant institutional force, but as an embedded part of an ordinary life. The invoking of ordi...

The president's role in advancing civic engagement: The Widener-Chester Partnership.

Science.gov (United States)

Harris, James T

2009-01-01

Efforts by metropolitan universities to engage in meaningful and democratic partnerships with community organizations require much time, effort, and considerable resources from the university and its various constituents. Widener University is located in a distressed urban environment. This study, presented from the perspective of the university's president, highlights the challenges associated with engaging in such work and provides insight into possible future directions for advancing an institution-wide civic engagement agenda. It outlines in detail the initiatives created between Widener and the Chester, Pennsylvania, school district over six years and explains how after many failures, the university came to the conclusion that its best chance for success would be to develop a separately chartered university partnership school. The account forcefully underscores that the costs associated with civic engagement are worth the investment in spite of the number of setbacks and frustrations inherent in this type of work.

Record length, mass, and clutch size in the nonindigenous Burmese Python, Python bivittatus Kuhl 1820 (Squamata: Pythonidae), in Florida

Science.gov (United States)

Krysko, Kenneth L.; Hart, Kristen M.; Smith, Brian J.; Selby, Thomas H.; Cherkiss, Michael S.; Coutu, Nicholas T.; Reichart, Rebecca M.; Nuñez, Leroy P.; Mazzotti, Frank J.; Snow, Ray W.

2012-01-01

The Burmese Python, Python bivittatus Kuhl 1820 (Squamata: Pythonidae), is indigenous to northern India,east to southern China, and south to Vietnam and a few islands in Indonesia (Barker and Barker 2008, Reed and Rodda 2009). This species has been introduced since at least 1979 in southern Florida, USA, where it likely began reproducing and became established during the 1980s (Meshaka et al. 2000, Snowet al. 2007b,Kraus 2009, Krysko et al. 2011, Willson et al. 2011). Python bivittatus has been documented in Florida consuming a variety of mammals and birds, and the American Alligator(Alligator mississippiensis) (Snowet al. 2007a, 2007b; Harvey et al. 2008; Rochford et al. 2010b; Holbrook and Chesnes 2011), many of which are protected species. Herein, we provide details on two of the largest known wild P. bivittatus in Florida to date, including current records on length,mass,clutch size, and diet.

Forced copulation results in few extrapair fertilizations in Ross's and lesser snow geese

Science.gov (United States)

Dunn, P.O.; Afton, A.D.; Gloutney, M.L.; Alisauskas, R.T.

1999-01-01

Extrapair paternity varies from 0 to over 70% of young among various populations of birds. Comparative studies have suggested that this variation is related to nesting density, breeding synchrony and the proportion of extrapair copulations. We used minisatellite DNA fingerprinting to examine levels of extrapair paternity in Ross's geese, Chen rossi, and lesser snow geese, C. caerulescens c. (hereafter snow geese) nesting in the largest known goose colony in the world. These geese have one of the highest known percentages of extrapair copulation (46-56% of all attempted copulations), and all of these appeared to be forced. Among all successful copulations, 33 and 38% were extrapair in Ross's and snow geese, respectively. Despite the high percentage of extrapair copulations, extrapair paternity was low in both Ross's and snow geese (2-5% of young). Extrapair paternity was not related to nest density in either species. However, in snow geese, extrapair paternity was more likely to occur in nests of females that nested asynchronously, either early or late in the season. This is one of a few reported examples of a negative relationship between extrapair paternity and breeding synchrony. Extrapair young also tended to come from eggs laid later in the clutch. Although forced extrapair copulations appear to be a relatively inefficient reproductive tactic for males, they may provide a reproductive advantage for some males.

Disentangling the Overlap Between Employee Engagement and Passion

Directory of Open Access Journals (Sweden)

Gaja Zager Kocjan

2015-07-01

Full Text Available With the emergence of positive psychology and the subsequent positive organizational behavior movement, focusing on the employee experience and factors of positive psychological states in employees has come to the forefront. In recent years, several studies have emphasized the practical value of employee engagement and passion (the dualistic model of passion; Vallerand et al., 2003 in predicting various positive individual and organizational outcomes (e.g., performance, well-being. Although engagement and passion seem relatively easy to spot at first glance, they are rather difficult to define and distinguish one from another. Therefore, the aim of the present article is to provide a comprehensive discussion on the shared aspects and conceptual differences between these two constructs within the work environment. The most noticeable overlap is proposed to exist between engagement and harmonious passion. It concerns the common underlying development mechanism, a very strong motivational force to engage in one's work, strong identification with work, and similar relationships with various antecedents and consequences. It is suggested that broader scope theories (such as the self-determination theory should be taken into consideration in order to unify common findings from both theoretical backgrounds and overcome redundancy and the risk of multiplication of concepts in positive psychology.

LightForce Photon-Pressure Collision Avoidance: Updated Efficiency Analysis Utilizing a Highly Parallel Simulation Approach

Science.gov (United States)

Stupl, Jan; Faber, Nicolas; Foster, Cyrus; Yang, Fan Yang; Nelson, Bron; Aziz, Jonathan; Nuttall, Andrew; Henze, Chris; Levit, Creon

2014-01-01

This paper provides an updated efficiency analysis of the LightForce space debris collision avoidance scheme. LightForce aims to prevent collisions on warning by utilizing photon pressure from ground based, commercial off the shelf lasers. Past research has shown that a few ground-based systems consisting of 10 kilowatt class lasers directed by 1.5 meter telescopes with adaptive optics could lower the expected number of collisions in Low Earth Orbit (LEO) by an order of magnitude. Our simulation approach utilizes the entire Two Line Element (TLE) catalogue in LEO for a given day as initial input. Least-squares fitting of a TLE time series is used for an improved orbit estimate. We then calculate the probability of collision for all LEO objects in the catalogue for a time step of the simulation. The conjunctions that exceed a threshold probability of collision are then engaged by a simulated network of laser ground stations. After those engagements, the perturbed orbits are used to re-assess the probability of collision and evaluate the efficiency of the system. This paper describes new simulations with three updated aspects: 1) By utilizing a highly parallel simulation approach employing hundreds of processors, we have extended our analysis to a much broader dataset. The simulation time is extended to one year. 2) We analyze not only the efficiency of LightForce on conjunctions that naturally occur, but also take into account conjunctions caused by orbit perturbations due to LightForce engagements. 3) We use a new simulation approach that is regularly updating the LightForce engagement strategy, as it would be during actual operations. In this paper we present our simulation approach to parallelize the efficiency analysis, its computational performance and the resulting expected efficiency of the LightForce collision avoidance system. Results indicate that utilizing a network of four LightForce stations with 20 kilowatt lasers, 85% of all conjunctions with a

Student Engagement

DEFF Research Database (Denmark)

Conduit, Jodie; Karpen, Ingo; Farrelly, Francis

2017-01-01

system (the university), the narrow service system (the course), and the individual dyadic level of engagement (the student-lecturer interaction). These findings could be further considered and empirically tested in other engagement contexts (e.g. employee engagement, customer engagement).......Universities are seeking to actively and strategically manage student engagement through providing opportunities for students to interact and engage with the institution on a range of levels and in different ways. However, this increasingly complex and multi-layered nature of student engagement...... within a tertiary education environment is not well understood. Through qualitative focus groups and a series of interviews with undergraduate and postgraduate students, this study explores and articulates the cognitive, emotional, behavioural and social dimensions of engagement that depict the nature...

A modified prebind engagement process reduces biomechanical loading on front row players during scrummaging: a cross-sectional study of 11 elite teams.

Science.gov (United States)

Cazzola, Dario; Preatoni, Ezio; Stokes, Keith A; England, Michael E; Trewartha, Grant

2015-04-01

Biomechanical studies of the rugby union scrum have typically been conducted using instrumented scrum machines, but a large-scale biomechanical analysis of live contested scrummaging is lacking. We investigated whether the biomechanical loading experienced by professional front row players during the engagement phase of live contested rugby scrums could be reduced using a modified engagement procedure. Eleven professional teams (22 forward packs) performed repeated scrum trials for each of the three engagement techniques, outdoors, on natural turf. The engagement processes were the 2011/2012 (referee calls crouch-touch-pause-engage), 2012/2013 (referee calls crouch-touch-set) and 2013/2014 (props prebind with the opposition prior to the 'Set' command; PreBind) variants. Forces were estimated by pressure sensors on the shoulders of the front row players of one forward pack. Inertial Measurement Units were placed on an upper spine cervical landmark (C7) of the six front row players to record accelerations. Players' motion was captured by multiple video cameras from three viewing perspectives and analysed in transverse and sagittal planes of motion. The PreBind technique reduced biomechanical loading in comparison with the other engagement techniques, with engagement speed, peak forces and peak accelerations of upper spine landmarks reduced by approximately 20%. There were no significant differences between techniques in terms of body kinematics and average force during the sustained push phase. Using a scrum engagement process which involves binding with the opposition prior to the engagement reduces the stresses acting on players and therefore may represent a possible improvement for players' safety. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

An assessment of the overlap between morale and work engagement in a nonoperational military sample.

Science.gov (United States)

Ivey, Gary W; Blanc, J-R Sébastien; Mantler, Janet

2015-07-01

The degree of overlap between two positive motivational constructs-morale and work engagement-was assessed in a random sample of Canadian Armed Forces personnel stationed across Canada (N = 1,224). Based on self-determination theory and past research, job-specific self-efficacy, trust in teammates, and job significance were expected to be associated with morale and work engagement. Structural equation modeling analyses revealed that morale and work engagement were highly positively correlated, but had different patterns of association with predictor and outcome variables. Although trust in teammates and job significance predicted both morale and work engagement, job-specific self-efficacy predicted morale but not work engagement. Willingness to deploy on operations, turnover intentions, and psychological distress were predicted by both morale and work engagement, but morale was a better predictor of psychological distress and work engagement was a stronger predictor of turnover intentions. Together, the results suggest that, despite their overlap, morale and work engagement, as defined and measured herein, are not interchangeable. (c) 2015 APA, all rights reserved).

Staying Engaged: Knowledge and Research Needs in Student Engagement

Science.gov (United States)

Wang, Ming-Te; Degol, Jessica

2016-01-01

In this article, we review knowledge about student engagement and look ahead to the future of study in this area. We begin by describing how researchers in the field define and study student engagement. In particular, we describe the levels, contexts, and dimensions that constitute the measurement of engagement, summarize the contexts that shape engagement and the outcomes that result from it, and articulate person-centered approaches for analyzing engagement. We conclude by addressing limitations to the research and providing recommendations for study. Specifically, we point to the importance of incorporating more work on how learning-related emotions, personality characteristics, prior learning experiences, shared values across contexts, and engagement in nonacademic activities influence individual differences in student engagement. We also stress the need to improve our understanding of the nuances involved in developing engagement over time by incorporating more extensive longitudinal analyses, intervention trials, research on affective neuroscience, and interactions among levels and dimensions of engagement. PMID:27087833

Is a Transdisciplinary Theory of Engagement in Organized Settings Possible? A Concept Analysis of the Literature on Employee Engagement, Consumer Engagement and Patient Engagement.

Science.gov (United States)

Graffigna, Guendalina

2017-01-01

Organizations are experiencing increased competition, disruptive innovation, and continuous changes in their social and economic context. Furthermore, the decrease of resources (economic and human) in such a demanding context make it imperative for organizations to find new models and strategies to make their service delivery more sustainable at the economic, environmental and psychological levels. In such a complex scenario the concept of engagement of the individuals involved in organized settings (either as service providers or as final receivers) is a promising lever for innovation. However, despite the number of studies on the matter, the debate on engagement is still very fragmented because the corpus of literature addressing the different areas of engagement is divided and diverse in its nature. In this paper, we discuss the results of a conceptual analysis of the literature conducted in order to investigate overlapping features and areas of divergence among three different areas of investigation and application of the engagement phenomenon in organized settings: the domains of employee engagement, consumer engagement, and patient engagement. These are deliberately selected as prototypical of the phenomenon of engagement along the "inside/outside" of organizational settings. The analysis consisted in a qualitative conceptual survey? Of the scholarly literature indexed with the key terms "employee engagement," "consumer engagement," and "patient engagement." We performed a key-word based survey? Of the literature in the Scopus database. A total of 163 articles were selected and analyzed. The analysis cast light on the following areas of conceptual overlap among employee, consumer and patient engagement: (1) engagement is different from empowerment and activation; (2) engagement is a multi-componential psychological experience; (3) engagement is a self-transformative experience; (4) engagement develops within a relational context; (5) engagement is a systemic

Is a Transdisciplinary Theory of Engagement in Organized Settings Possible? A Concept Analysis of the Literature on Employee Engagement, Consumer Engagement and Patient Engagement

Directory of Open Access Journals (Sweden)

Guendalina Graffigna

2017-07-01

Full Text Available Organizations are experiencing increased competition, disruptive innovation, and continuous changes in their social and economic context. Furthermore, the decrease of resources (economic and human in such a demanding context make it imperative for organizations to find new models and strategies to make their service delivery more sustainable at the economic, environmental and psychological levels. In such a complex scenario the concept of engagement of the individuals involved in organized settings (either as service providers or as final receivers is a promising lever for innovation. However, despite the number of studies on the matter, the debate on engagement is still very fragmented because the corpus of literature addressing the different areas of engagement is divided and diverse in its nature. In this paper, we discuss the results of a conceptual analysis of the literature conducted in order to investigate overlapping features and areas of divergence among three different areas of investigation and application of the engagement phenomenon in organized settings: the domains of employee engagement, consumer engagement, and patient engagement. These are deliberately selected as prototypical of the phenomenon of engagement along the “inside/outside” of organizational settings. The analysis consisted in a qualitative conceptual survey? Of the scholarly literature indexed with the key terms “employee engagement,” “consumer engagement,” and “patient engagement.” We performed a key-word based survey? Of the literature in the Scopus database. A total of 163 articles were selected and analyzed. The analysis cast light on the following areas of conceptual overlap among employee, consumer and patient engagement: (1 engagement is different from empowerment and activation; (2 engagement is a multi-componential psychological experience; (3 engagement is a self-transformative experience; (4 engagement develops within a relational context

Public health program planning logic model for community engaged type 2 diabetes management and prevention.

Science.gov (United States)

West, Joseph F

2014-02-01

Diabetes remains a growing epidemic with widening health inequity gaps in disease management, self-management knowledge, access to care and outcomes. Yet there is a paucity of evaluation tools for community engaged interventions aimed at closing the gaps and improving health. The Guide to Community Preventive Services (the Community Guide) developed by the Task Force on Community Preventive Services (the Task Force) at the Centers for Disease Control and Prevention (CDC) recommends two healthcare system level interventions, case management interventions and disease management programs, to improve glycemic control. However, as a public health resource guide for diabetes interventions a model for community engagement is a glaringly absent component of the Community Guide recommendations. In large part there are few evidence-based interventions featuring community engagement as a practice and system-level focus of chronic disease and Type 2 diabetes management. The central argument presented in this paper is that the absence of these types of interventions is due to the lack of tools for modeling and evaluating such interventions, especially among disparate and poor populations. A conceptual model emphasizing action-oriented micro-level community engagement is needed to complement the Community Guide and serve as the basis for testing and evaluation of these kinds of interventions. A unique logic model advancing the Community Guide diabetes recommendations toward measureable and sustainable community engagement for improved Type 2 diabetes outcomes is presented. Copyright © 2013 Elsevier Ltd. All rights reserved.

Strengthening stakeholder-engaged research and research on stakeholder engagement.

Science.gov (United States)

Ray, Kristin N; Miller, Elizabeth

2017-06-01

Stakeholder engagement is an emerging field with little evidence to inform best practices. Guidelines are needed to improve the quality of research on stakeholder engagement through more intentional planning, evaluation and reporting. We developed a preliminary framework for planning, evaluating and reporting stakeholder engagement, informed by published conceptual models and recommendations and then refined through our own stakeholder engagement experience. Our proposed exploratory framework highlights contexts and processes to be addressed in planning stakeholder engagement, and potential immediate, intermediate and long-term outcomes that warrant evaluation. We use this framework to illustrate both the minimum information needed for reporting stakeholder-engaged research and the comprehensive detail needed for reporting research on stakeholder engagement.

Genetic algorithm based on optimization of neural network structure for fault diagnosis of the clutch retainer mechanism of MF 285 tractor

Directory of Open Access Journals (Sweden)

S. F Mousavi

2016-09-01

Full Text Available Introduction The diagnosis of agricultural machinery faults must be performed at an opportune time, in order to fulfill the agricultural operations in a timely manner and to optimize the accuracy and the integrity of a system, proper monitoring and fault diagnosis of the rotating parts is required. With development of fault diagnosis methods of rotating equipment, especially bearing failure, the security, performance and availability of machines has been increasing. In general, fault detection is conducted through a specific procedure which starts with data acquisition and continues with features extraction, and subsequently failure of the machine would be detected. Several practical methods have been introduced for fault detection in rotating parts of machineries. The review of the literature shows that both Artificial Neural Networks (ANN and Support Vector Machines (SVM have been used for this purpose. However, the results show that SVM is more effective than Artificial Neural Networks in fault detection of such machineries. In some smart detection systems, incorporating an optimized method such as Genetic Algorithm in the Neural Network model, could improve the fault detection procedure. Consequently, the fault detection performance of neural networks may also be improved by combining with the Genetic Algorithm and hence will be comparable with the performance of the Support Vector Machine. In this study, the so called Genetic Algorithm (GA method was used to optimize the structure of the Artificial Neural Networks (ANN for fault detection of the clutch retainer mechanism of Massey Ferguson 285 tractor. Materials and Methods The test rig consists of some electro mechanical parts including the clutch retainer mechanism of Massey Ferguson 285 tractor, a supporting shaft, a single-phase electric motor, a loading mechanism to model the load of the tractor clutch and the corresponding power train gears. The data acquisition section consists of a

Engagement techniques and playing level impact the biomechanical demands on rugby forwards during machine-based scrummaging

OpenAIRE

Preatoni, Ezio; Stokes, Keith A.; England, Michael E.; Trewartha, Grant

2014-01-01

Objectives This cross-sectional study investigated the factors that may influence the physical loading on rugby forwards performing a scrum by studying the biomechanics of machine-based scrummaging under different engagement techniques and playing levels.Methods 34 forward packs from six playing levels performed repetitions of five different types of engagement techniques against an instrumented scrum machine under realistic training conditions. Applied forces and body movements were recorded...

UNITED STATES SPECIAL OPERATIONS FORCES IN AFRICA

Science.gov (United States)

2016-02-16

hundreds of traditional African religions associated with the plethora of tribal groups as well as large populations of Muslims, primarily in the...engagement, and the complexities of the African continent, Special Operations Forces (SOF) are uniquely suited to further those interests. Additionally...protecting access to abundant strategic resources, fostering integration into the global economy, and empowering Africans and their partners to deal

Career Engagement: Bridging Career Counseling and Employee Engagement

Science.gov (United States)

Neault, Roberta A.; Pickerell, Deirdre A.

2011-01-01

In this article, the authors present a model of career engagement that helps bridge the gap between career counselors' focus on supporting individuals to find meaningful work and employers' desire for an engaged, productive, and committed workforce. They briefly review highlights of the employee engagement literature, introduce the Career…

Overwhelming Force - A Persistent Concept in US Military Thinking

DEFF Research Database (Denmark)

Ulrich, Philip Christian

In the second brief in the series Overwhelming Force – A Persistent Concept in US Military Thinking, Philip Chr. Ulrich analyzes how the US Army reacted to the defeat in the Vietnam War. The US Army wanted to avoid operations, which might lead to a long term engagement in stability operations......, as engagement in such operations were seen as the reason for the defeat in Vietnam. The US Army also chose to exclude stability operations and counterinsurgency from its doctrines and teachings. Instead, the US Army chose to focus on conventional war, supplemented by an increasing fascination with technology...

From rhetoric to reality: consumer engagement in 16 multi-stakeholder alliances.

Science.gov (United States)

Greene, Jessica; Farley, Diane C; Christianson, Jon B; Scanlon, Dennis P; Shi, Yunfeng

2016-08-01

A key component of the Aligning Forces for Quality (AF4Q) program was engaging consumers in their health and healthcare. We examined the extent to which the alliances embraced 4 areas of consumer engagement: self-management, consumer friendliness of reports of healthcare provider quality, involvement of consumers in alliance governance, and the integration of consumers into quality improvement teams. We used a largely qualitative approach. The evaluation team conducted 1100 in-depth interviews with alliance stakeholders. Two authors reviewed the consumer engagement data for each alliance to assess its level of embrace in the 4 consumer engagement areas. For consumer friendliness of public reporting websites, we also assessed alliance public reports for reading level, technical language, and evaluable displays. Population-level effects were also examined for self-management and public reporting. Consumer engagement was new to most alliances, and few had staff with consumer engagement expertise or existing consumer constituencies. For each area of consumer engagement, some alliances enthusiastically embraced the work, other alliances made a concerted but limited effort to develop programs, and a third group of alliances did the minimum work required. Integrating consumers into governance was the area most often embraced, followed by making public reports consumer friendly. Two alliances strongly embraced both self-management and integrating patients into quality improvement efforts. The AF4Q program did not have greater population level effects from self-management or public reporting than were those observed in a national comparison sample. The AF4Q program sparked a few alliances to develop robust consumer engagement programming, while most alliances tried consumer engagement efforts for the first time and developed an appreciation for integrating consumer perspectives into their work.

Micropipette force probe to quantify single-cell force generation: application to T-cell activation.

Science.gov (United States)

Sawicka, Anna; Babataheri, Avin; Dogniaux, Stéphanie; Barakat, Abdul I; Gonzalez-Rodriguez, David; Hivroz, Claire; Husson, Julien

2017-11-07

In response to engagement of surface molecules, cells generate active forces that regulate many cellular processes. Developing tools that permit gathering mechanical and morphological information on these forces is of the utmost importance. Here we describe a new technique, the micropipette force probe, that uses a micropipette as a flexible cantilever that can aspirate at its tip a bead that is coated with molecules of interest and is brought in contact with the cell. This technique simultaneously allows tracking the resulting changes in cell morphology and mechanics as well as measuring the forces generated by the cell. To illustrate the power of this technique, we applied it to the study of human primary T lymphocytes (T-cells). It allowed the fine monitoring of pushing and pulling forces generated by T-cells in response to various activating antibodies and bending stiffness of the micropipette. We further dissected the sequence of mechanical and morphological events occurring during T-cell activation to model force generation and to reveal heterogeneity in the cell population studied. We also report the first measurement of the changes in Young's modulus of T-cells during their activation, showing that T-cells stiffen within the first minutes of the activation process. © 2017 Sawicka et al. This article is distributed by The American Society for Cell Biology under license from the author(s). Two months after publication it is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

A robust H∞ control-based hierarchical mode transition control system for plug-in hybrid electric vehicle

Science.gov (United States)

Yang, Chao; Jiao, Xiaohong; Li, Liang; Zhang, Yuanbo; Chen, Zheng

2018-01-01

To realize a fast and smooth operating mode transition process from electric driving mode to engine-on driving mode, this paper presents a novel robust hierarchical mode transition control method for a plug-in hybrid electric bus (PHEB) with pre-transmission parallel hybrid powertrain. Firstly, the mode transition process is divided into five stages to clearly describe the powertrain dynamics. Based on the dynamics models of powertrain and clutch actuating mechanism, a hierarchical control structure including two robust H∞ controllers in both upper layer and lower layer is proposed. In upper layer, the demand clutch torque can be calculated by a robust H∞controller considering the clutch engaging time and the vehicle jerk. While in lower layer a robust tracking controller with L2-gain is designed to perform the accurate position tracking control, especially when the parameters uncertainties and external disturbance occur in the clutch actuating mechanism. Simulation and hardware-in-the-loop (HIL) test are carried out in a traditional driving condition of PHEB. Results show that the proposed hierarchical control approach can obtain the good control performance: mode transition time is greatly reduced with the acceptable jerk. Meanwhile, the designed control system shows the obvious robustness with the uncertain parameters and disturbance. Therefore, the proposed approach may offer a theoretical reference for the actual vehicle controller.

Gamification of the Laboratory Experience to Encourage Student Engagement

Directory of Open Access Journals (Sweden)

Kevin Drace

2013-08-01

Full Text Available The American Society for Microbiology (ASM Task Force on Curriculum Guidelines for Undergraduate Microbiology Students published recommendations for introductory microbiology courses that suggest teaching specific skill sets in the laboratory beyond just fundamental knowledge and concepts of microbiology (6; however, students can sometimes view a skills-based laboratory experience as a task list of unrelated assignments to complete for a grade. Therefore, providing explicit connections throughout the lecture and laboratory exercises is critical for a truly integrated learning experience. Several pedagogical techniques can provide a coherent framework throughout a course. For example, case-based studies can connect lecture with laboratory skills and increase student engagement by applying newly developed knowledge and skills to tackle real-world simulations (2, 3. One reason that case-based studies succeed is that they can provide intrinsic motivations and an alternate purpose for students to engage with the material. A more recent trend in pedagogy involves using game design elements to increase student engagement and motivation. Gamification is the application of game design (accruing points or badges, reaching significant levels of accomplishment, or other reward elements in a non-game context to motivate or influence participation (1, 5. A natural extension of both of these methods is to gamify a case-based approach where a fictional scenario is presented for students to role-play as scientists using their developed skills to solve a complex problem. The typical microbiology laboratory, as described by the ASM Task Force, can easily incorporate game design elements without extensive modification of the exercises themselves. Instead, gamification involves structuring the lab in a way that gives the course a coherent and unified purpose. This ultimately allows the student to see how the principles and concepts of lecture and laboratory connect

Work engagement in employees at professional improvement programs in health

Directory of Open Access Journals (Sweden)

Elizangela Gianini Gonsalez

2017-09-01

Full Text Available Objective: This study evaluated the levels of engagement at work in enhancement programs and professionals training in health. Method: A cross-sectional study with 82 health professionals enhancement programs and improvement of a public institution in the State of São Paulo, using the Utrech Work Engagement Scale (UWES, a self-administered questionnaire composed of seventeen self-assessment items in three dimensions: vigor, dedication and absorption. The scores were calculated according to the statistical model proposed in the Preliminary Manual UWES. Results: Engagement levels were too high on the force, high dedication and dimension in general score, and medium in size to 71.61% absorption, 58.03%, 53.75% and 51.22% of workers, respectively. The professionals present positive relationship with the work; they are responsible, motivated and dedicated to the job and to the patients. Conclusion: Reinforces the importance of studies that evaluate positive aspects of the relationship between professionals and working environment, contributing to strengthen the programs of improvement, advancing the profile of professionals into the labour market.

Theater Security Cooperation: The Military Engagement Team. Lessons and Best Practices

Science.gov (United States)

2017-01-01

team leader ensures completion of the DTS authorizations. Concurrently, MET arranges lodging through U.S. Embassy-approved hotels and any ground...host nation’s satisfaction and willingness to further develop the relationship with U.S. forces. As such, it is important for the MET to gain an...understanding of the cultural factors that influence each engagement. Cultural factors may include traditional customs such as methods of greeting

Inspired Leadership: Engaging the Voice and Embodying Advocacy

OpenAIRE

Jacobs, Kamra Angelica

2017-01-01

The journey of finding my voice has forced me to show up and be seen in my work. I silenced my own voice at a dehumanizing call center, as a faceless target for frustrated customers. l discovered the power of connection by embodying advocacy and engaging my voice and body in my work. Primarily, I listen to my gut and trust my intuition. Secondly, I advocate by speaking up for those who cannot advocate for themselves. During the Streamers production process, when I felt the twinge in my gut,...

Development of free running differential. Development of differential with an actuator and a clutch which disconnects the traction; Free running defu no kaihatsu. Kirippanashi kiko oyobi actuator wo naizoshita differential sochi no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

Yamazaki, N; Teraoka, M; Ishikawa, O; Nagaoka, T; Ugajin, K [Tochigi Fuji Sangyo Co. Ltd., Tochigi (Japan)

1997-10-01

Free Running Differential has an effect on fuel economy and noise reduction from drive line for four wheel drive vehicle. It has an actuator and a clutch which disconnects the traction from no driving side tire when two wheel drive is selected. this unit can be installed in conventional differential carrier with no design change. It is compact in design and low in cost. We evaluate it as having a dominant position among any other Free running system. 7 figs.

Engaged to Learn Ways of Engaging ESL Learners

Directory of Open Access Journals (Sweden)

Brian Tomlinson

2010-01-01

Full Text Available In this paper I am going to argue that our most important role as language teachers is to provide potentially engaging materials for our learners and then to make use of them in optimally engaging ways. If we do not engage our learners most of the time no amount of exposure, teaching, practice or use of the language will help them to achieve sufficient language acquisition and development.

IR technology for enhanced force protection by AIM

Science.gov (United States)

Breiter, R.; Ihle, T.; Rode, W.; Wendler, J.; Rühlich, I.; Haiml, M.; Ziegler, J.

2008-04-01

In all recent missions our forces are faced with various types of asymmetric threads like snipers, IEDs, RPGs or MANPADS. 2 nd and 3 rd Gen IR technology is a backbone of modern force protection by providing situational awareness and accurate target engagement at day/night. 3 rd Gen sensors are developed for thread warning capabilities by use of spectral or spatial information. The progress on a dual-color IR module is discussed in a separate paper [1]. A 1024x256 SWIR array with flexure bearing compressor and pulse tube cold finger provides > 50,000h lifetime for space or airborne hyperspectral imaging in pushbroom geometry with 256 spectral channels for improved change detection and remote sensing of IEDs or chemical agents. Similar concepts are pursued in the LWIR with either spectroscopic imaging or a system of LWIR FPA combined with a cooled tunable Laser to do spectroscopy with stimulated absorption of specific wavelengths. AIM introduced the RangIR sight to match the requirements of sniper teams, AGLs and weapon stations, extending the outstanding optronic performance of the fielded HuntIR with position data of a target by a laser range finder (LRF), a 3 axis digital magnetic compass (DMC) and a ballistic computer for accurate engagement of remote targets. A version with flexure bearing cooler with >30,000h life time is being developed for continuous operation in e.g. gunfire detection systems. This paper gives an overview of AIM's technologies for enhanced force protection.

Public Health Employees' Perception of Workplace Environment and Job Satisfaction: The Role of Local Health Departments' Engagement in Accreditation.

Science.gov (United States)

Ye, Jiali; Verma, Pooja; Leep, Carolyn; Kronstadt, Jessica

To examine the association between local health departments' (LHDs') engagement in accreditation and their staffs' perceptions of workplace environment and the overall satisfaction with their jobs. Data from the 2014 Public Health Workforce Interests and Needs Survey (PH WINS) (local data only) and the 2014 Forces of Change survey were linked using LHDs' unique ID documented by the National Association of County & City Health Officials. The Forces of Change survey assessed LHDs' accreditation status. Local health departments were classified as "formally engaged" in the Public Health Accreditation Board accreditation process if they had achieved accreditation, submitted an application, or submitted a statement of intent. The PH WINS survey measured employees' perception of 3 aspects of workplace environment, including supervisory support, organizational support, and employee engagement. The overall satisfaction was measured using the Job in General Scale (abridged). There are 1884 LHD employees who completed PH WINS and whose agencies responded to the question on the accreditation status of the Forces of Change survey. When compared with employees from LHDs less engaged in accreditation, employees from LHDs that were formally engaged in accreditation gave higher ratings to all 3 aspects of workplace environment and overall job satisfaction. Controlling for employee demographic characteristics and LHD jurisdiction size, the agency's formal engagement in accreditation remained related to a higher score in perceived workplace environment and job satisfaction. After controlling for perceived workplace environment, accreditation status was marginally associated with job satisfaction. The findings provide support for previous reports by LHD leaders on the benefits of accreditation related to employee morale and job satisfaction. The results from this study allow us to further catalog the benefits of accreditation in workforce development and identify factors that may

Measuring Engagement in Fourth to Twelfth Grade Classrooms: The Classroom Engagement Inventory

Science.gov (United States)

Wang, Ze; Bergin, Christi; Bergin, David A.

2014-01-01

Research on factors that may promote engagement is hampered by the absence of a measure of classroom-level engagement. Literature has suggested that engagement may have 3 dimensions--affective, behavioral, and cognitive. No existing engagement scales measure all 3 dimensions at the classroom level. The Classroom Engagement Inventory (CEI) was…

Comprehensive Modeling and Analysis of Rotorcraft Variable Speed Propulsion System With Coupled Engine/Transmission/Rotor Dynamics

Science.gov (United States)

DeSmidt, Hans A.; Smith, Edward C.; Bill, Robert C.; Wang, Kon-Well

2013-01-01

This project develops comprehensive modeling and simulation tools for analysis of variable rotor speed helicopter propulsion system dynamics. The Comprehensive Variable-Speed Rotorcraft Propulsion Modeling (CVSRPM) tool developed in this research is used to investigate coupled rotor/engine/fuel control/gearbox/shaft/clutch/flight control system dynamic interactions for several variable rotor speed mission scenarios. In this investigation, a prototypical two-speed Dual-Clutch Transmission (DCT) is proposed and designed to achieve 50 percent rotor speed variation. The comprehensive modeling tool developed in this study is utilized to analyze the two-speed shift response of both a conventional single rotor helicopter and a tiltrotor drive system. In the tiltrotor system, both a Parallel Shift Control (PSC) strategy and a Sequential Shift Control (SSC) strategy for constant and variable forward speed mission profiles are analyzed. Under the PSC strategy, selecting clutch shift-rate results in a design tradeoff between transient engine surge margins and clutch frictional power dissipation. In the case of SSC, clutch power dissipation is drastically reduced in exchange for the necessity to disengage one engine at a time which requires a multi-DCT drive system topology. In addition to comprehensive simulations, several sections are dedicated to detailed analysis of driveline subsystem components under variable speed operation. In particular an aeroelastic simulation of a stiff in-plane rotor using nonlinear quasi-steady blade element theory was conducted to investigate variable speed rotor dynamics. It was found that 2/rev and 4/rev flap and lag vibrations were significant during resonance crossings with 4/rev lagwise loads being directly transferred into drive-system torque disturbances. To capture the clutch engagement dynamics, a nonlinear stick-slip clutch torque model is developed. Also, a transient gas-turbine engine model based on first principles mean

A single magnetic nanocomposite cilia force sensor

KAUST Repository

Alfadhel, Ahmed; Khan, Mohammed Asadullah; Cardoso, Susana; Kosel, Jü rgen

2016-01-01

The advancements in fields like robotics and medicine continuously require improvements of sensor devices and more engagement of cooperative sensing technologies. For example, instruments such as tweezers with sensitive force sensory heads could provide the ability to sense a variety of physical quantities in real time, such as the amount and direction of the force applied or the texture of the gripped object. Force sensors with such abilities could be great solutions toward the development of smart surgical tools. In this work, a unique force sensor that can be integrated at the tips of robotic arms or surgical tools is reported. The force sensor consists of a single bioinspired, permanent magnetic and highly elastic nanocomposite cilia integrated on a magnetic field sensing element. The nanocomposite is prepared from permanent magnetic nanowires incorporated into the highly elastic polydimethylsiloxane. We demonstrate the potential of this concept by performing several experiments to show the performance of the force sensor. The developed sensor element has a 200 μm in diameter single cilium with 1:5 aspect ratio and shows a detection range up to 1 mN with a sensitivity of 1.6 Ω/mN and a resolution of 31 μN. The simple fabrication process of the sensor allows easy optimization of the sensor performance to meet the needs of different applications.

A single magnetic nanocomposite cilia force sensor

KAUST Repository

Alfadhel, Ahmed

2016-04-20

The advancements in fields like robotics and medicine continuously require improvements of sensor devices and more engagement of cooperative sensing technologies. For example, instruments such as tweezers with sensitive force sensory heads could provide the ability to sense a variety of physical quantities in real time, such as the amount and direction of the force applied or the texture of the gripped object. Force sensors with such abilities could be great solutions toward the development of smart surgical tools. In this work, a unique force sensor that can be integrated at the tips of robotic arms or surgical tools is reported. The force sensor consists of a single bioinspired, permanent magnetic and highly elastic nanocomposite cilia integrated on a magnetic field sensing element. The nanocomposite is prepared from permanent magnetic nanowires incorporated into the highly elastic polydimethylsiloxane. We demonstrate the potential of this concept by performing several experiments to show the performance of the force sensor. The developed sensor element has a 200 μm in diameter single cilium with 1:5 aspect ratio and shows a detection range up to 1 mN with a sensitivity of 1.6 Ω/mN and a resolution of 31 μN. The simple fabrication process of the sensor allows easy optimization of the sensor performance to meet the needs of different applications.

A Search for Warriors: The Effects of Technology on the Air Force Ethos

Science.gov (United States)

1997-04-01

quoted by Oberstleutnant Peter F. Hauser, and Lt Col John Rawls , C., and Maj. John C. Ornduff, “Lessons from the Kriegsakademie: A Reflection of the...Engagement: A Vision for the 21st Century Air Force. Washington DC: Headquarters USAF, November 1996. Hauser, Oberstleutnant Peter F., and Rawls , Lt Col...Modern Strategy from Machiavelli to the Nuclear Age. Princeton, NJ.: Princeton University Press, 1986. “Recent Space Issues and Development.” Air Force

A Control Strategy for Mode Transition with Gear Shifting in a Plug-In Hybrid Electric Vehicle

Directory of Open Access Journals (Sweden)

Kyuhyun Sim

2017-07-01

Full Text Available The mode transition from electric propulsion mode to hybrid propulsion mode is important with regard to the power management strategy of plug-in hybrid electric vehicles (PHEVs. This is because mode transitions can occur frequently depending on the power management strategies and driving cycles, and because inadequate mode transitions worsen the fuel efficiency and drivability. A pre-transmission parallel PHEV uses a clutch between the internal combustion engine (ICE and the electric motor (EM to connect or disconnect the power source of the ICE for a mode transition. The mode transition requires additional energy consumption for clutch speed synchronization, and is accompanied by a drivetrain shock due to clutch engagement. This paper proposes a control strategy for the mode transition with gear-shifting to resolve the problems of energy consumption and drivetrain shock. Through the development of a PHEV performance simulator, we analyze the mode transition characteristics and propose a control strategy considering the vehicle acceleration and gear state. The control strategy reduces the duration required for the mode transition by moving the start time of the mode transition. This helps to improve energy efficiency while maintaining adequate drivability.

The impact of job and organisational characteristics on engagement at work in a petrochemical company / Christian Johan Goosen

OpenAIRE

Goosen, Christian Johan

2010-01-01

In today's tough economic environment, companies are forced to work more efficiently and effectively with the resources they have at their disposal. At the same time companies are struggling to attract and retain good people with the necessary attributes and skills in order for them to remain competitive. The challenge today is not just retaining talented people, but fully engaging them, capturing their minds and hearts at each stage of their work lives. Employee engagement has emerged as a c...

The American Expeditionary Forces Tank Corps in World War I: From Creation to Combat

Science.gov (United States)

1988-03-18

United States to provide 1,500 Liberty twelve-cylinder air- -raft P•pr•nri- (from which the tanks name was derived), starters. clutches, rad4itrz-, fanc ...Major’ Gene -al H. B. Crosby, 23 April 192D, Patton Military Papers. Box 47, Personal ’.•Perience Reports of Tank Cperations-1918. Pattc.ri Cc.liection. 99

Joining Forces: Preparing to Fight Coalition Air War

Science.gov (United States)

2013-06-01

penny-packets” of airpower.4 As Mediterranean Air Commander, Air Chief Marshal Sir Arthur W. Tedder’s centralized control of the coalition’s airpower...3 D’Este, Bitter Victory, 1943, 162. 4 Sir Arthur W. Tedder, “Air, Land, and Sea Warfare.” as quoted by Clint Hinote, Centralized...exercises, combat exercises, and defensive exercises. The USAF, RAAF, and JASDF plan to engage in a multilateral exercise at Andersen Air Force Base

Mechanical evidence that flamingos can support their body on one leg with little active muscular force.

Science.gov (United States)

Chang, Young-Hui; Ting, Lena H

2017-05-01

Flamingos (Phoenicopteridae) often stand and sleep on one leg for long periods, but it is unknown how much active muscle contractile force they use for the mechanical demands of standing on one leg: body weight support and maintaining balance. First, we demonstrated that flamingo cadavers could passively support body weight on one leg without any muscle activity while adopting a stable, unchanging, joint posture resembling that seen in live flamingos. By contrast, the cadaveric flamingo could not be stably held in a two-legged pose, suggesting a greater necessity for active muscle force to stabilize two-legged versus one-legged postures. Our results suggest that flamingos engage a passively engaged gravitational stay apparatus (proximally located) for weight support during one-legged standing. Second, we discovered that live flamingos standing on one leg have markedly reduced body sway during quiescent versus alert behaviours, with the point of force application directly under the distal joint, reducing the need for muscular joint torque. Taken together, our results highlight the possibility that flamingos stand for long durations on one leg without exacting high muscular forces and, thus, with little energetic expenditure. © 2017 The Author(s).

Variation in parental investment and relative clutch mass of the spiny-tail iguana, Ctenosaura pectinata (Squamata: Iguanidae in central México Variación en la inversión parental y masa relativa de la nidada en la iguana de cola espinosa Ctenosaura pectinata (Squamata: Iguanidae en el centro de México

Directory of Open Access Journals (Sweden)

Rubén Castro-Franco

2011-03-01

Full Text Available We measured the length, width, volume, and weight of 871 freshly laid eggs of 28 clutches of Ctenosaura pectinata. The iguanas were obtained from a tropical dry forest area in central Mexico. The relative clutch mass was related positively to the average egg weight but not to average egg volume. Unlike what usually occurs in lizards, where the body length strongly predicts egg production, in C. pectinata clutch size and egg size were not correlated with female weight or snout-vent length. Observed differences revealed variation in the weight-size of the egg within an individual clutch. Therefore, there is not an optimization of the egg in the studied population of Ctenosaura, as usually occurs in small lizards. This variation associated with reproduction takes place in the middle of the dry season, and may be interpreted as an adaptation to facilitate the adjustment of different phenotypes in environments with extreme drought.Medimos la longitud, amplitud, volumen, y peso de 871 huevos recién puestos de 28 nidadas de Ctenosaura pectinata. Las iguanas fueron obtenidas en un área de bosque tropical seco en el centro de México. La masa relativa de la nidada estuvo relacionada positivamente con el peso promedio de los huevos pero no con el volumen promedio del huevo. A diferencia de lo que ocurre usualmente en lagartijas, donde la longitud del cuerpo determina la producción de huevos, en C. pectinata el tamaño de la puesta y el tamaño del huevo no se correlacionan con el peso y tamaño de las hembras. Las diferencias observadas revelan variación en el tamaño y peso de los huevos dentro de las puestas individuales. En consecuencia, no hay una optimización del huevo en la población estudiada de Ctenosaura, como usualmente ocurre en lagartijas de tamaño pequeño. Esta variación asociada con la reproducción tiene lugar a mitad de la estación seca, y puede ser interpretada como una adaptación para facilitar el ajuste de diferentes

Torque sensor

Science.gov (United States)

Fgeppert, E.

1984-09-01

Mechanical means for sensing turning torque generated by the load forces in a rotary drive system is described. The sensing means is designed to operate with minimal effect on normal operation of the drive system. The invention can be employed in various drive systems, e.g., automotive engine-transmission power plants, electric motor-operated tools, and metal cutting machines. In such drive systems, the torque-sensing feature may be useful for actuation of various control devices, such as electric switches, mechanical clutches, brake actuators, fluid control valves, or audible alarms. The torque-sensing function can be used for safety overload relief, motor de-energization, engine fuel control transmission clutch actuation, remote alarm signal, tool breakage signal, etc.

Comparison of respiratory functions of athletes engaged in different individual sports branches

OpenAIRE

Tülin Atan; Pelin Akyol; Mehmet Çebi

2013-01-01

Objectives: It was aimed to research pulmonary functionsof sedentary males and athletes who engaged in differentindividual sports branches in the same age group.Methods: 50 male athletes in 15-16 age group in the starcategory participated from each of the branches of judo,athletics, wrestling, taekwondo, table tennis and swimmingand 50 sedentary males participated as well; beingin total 350 subjects. Among respiratory functions tests;vital capacity (VC), forced vital capacity (FVC) and maximu...

Some Studies on Reduction of Ovality in Turned Component-Case study

Directory of Open Access Journals (Sweden)

Nilesh Dhirajlal Ghetiya

2014-08-01

Full Text Available In the competitive market and globalization phase, industries are required to manufacture good quality machine tools with optimized performance at the moderate cost. Moreover, the industries are facing competition internationally due to worldwide globalization of business. This work aims to reduce the error called ovality in the turned work piece. This work piece is a clutch component used for the clutch assembly. For the clutch to work perfectly, it is required for its component to be precise and error free. The machining parameters like cutting speed, feed rate and depth of cut are taken as input parameters and the ovality as output response. Response surface methodology is used for the optimization of process parameters. The most significant process parameter causing the ovality has been found. The other attempts like balancing of the work piece and radiography of the work piece is done to solve the problem which is causing the ovality. The centrifugal force analysis of the component is carried out using finite element analysis.

Designing for user engagement

CERN Document Server

Geisler, Cheryl

2013-01-01

Designing for User Engagement on the Web: 10 Basic Principles is concerned with making user experience engaging. The cascade of social web applications we are now familiar with - blogs, consumer reviews, wikis, and social networking - are all engaging experiences. But engagement is an increasingly common goal in business and productivity environments as well. This book provides a foundation for all those seeking to design engaging user experiences rich in communication and interaction. Combining a handbook on basic principles with case studies, it provides readers with a ric

Achieving success through trust and engagement

Energy Technology Data Exchange (ETDEWEB)

Peterson, S., E-mail: jsp@nei.org [Nuclear Energy Inst., Washington, DC (United States)

2014-07-01

'Full text:' Business must embrace a new mantra: move beyond earning the license to operate - the minimum required standard - toward earning a license to lead - in which business serves the needs of shareholders and broader stakeholders by being profitable and acting as a positive force in society. Business must change the way it engages stakeholders, according to the 2014 Edleman Trust Barometer, an annual assessment of communications trends and challenges. Given this era of public skepticism; people need to see or hear information three to five times in different places and from different sources before believing it. They learn equally from traditional and social channels. The traditional pyramid of authority, with elites driving communications top down to public audiences, is now joined by an inverted pyramid of community - employees, consumers and social activists - involved in real-time, horizontal, constant peer-to-peer dialogue resulting in a new formula of influence. What does this mean for the nuclear energy industry? It requires a new level of engagement by industry executives, employees and third-party advocates as well as transparency in how we communicate to our audiences. Traditional communications channels continue to be part of the strategy, but constantly evolving social media platforms are critical to communicating to generations that have completely different media habits than the generation that preceded them. (author)

Achieving success through trust and engagement

International Nuclear Information System (INIS)

Peterson, S.

2014-01-01

'Full text:' Business must embrace a new mantra: move beyond earning the license to operate - the minimum required standard - toward earning a license to lead - in which business serves the needs of shareholders and broader stakeholders by being profitable and acting as a positive force in society. Business must change the way it engages stakeholders, according to the 2014 Edleman Trust Barometer, an annual assessment of communications trends and challenges. Given this era of public skepticism; people need to see or hear information three to five times in different places and from different sources before believing it. They learn equally from traditional and social channels. The traditional pyramid of authority, with elites driving communications top down to public audiences, is now joined by an inverted pyramid of community - employees, consumers and social activists - involved in real-time, horizontal, constant peer-to-peer dialogue resulting in a new formula of influence. What does this mean for the nuclear energy industry? It requires a new level of engagement by industry executives, employees and third-party advocates as well as transparency in how we communicate to our audiences. Traditional communications channels continue to be part of the strategy, but constantly evolving social media platforms are critical to communicating to generations that have completely different media habits than the generation that preceded them. (author)

Analytical solution to energy management guaranteeing battery life for hybrid trucks

NARCIS (Netherlands)

Pham, H.T.; Kessels, J.T.B.A.; van den Bosch, P.P.J.; Huisman, R.G.M.

2016-01-01

This paper considers a parallel hybrid electric truck where the tractive force delivered to the wheels can be provided by a conventional internal combustion engine (ICE) and/or a motor generator (MG). This hybrid truck is equipped with a clutch system that is capable of decoupling the ICE and the MG

Joint Force Quarterly. Issue 56, 1st Quarter, January 2010

Science.gov (United States)

2010-01-01

tol/comment/ columnists /guest_contributors/ article6789136.ece>. 12 Greg Bruno, Afghanistan’s National Security Forces, Council on Foreign Relations...organized criminal syndicate and narco-trafficking organization in order to maintain its revenue flow. One such criminal activity the FARC engages...international system. It is not a member of the international community, except perhaps in the negative sense (much as organized crime syndicates are

The ABCs of Student Engagement

Science.gov (United States)

Parsons, Seth A.; Nuland, Leila Richey; Parsons, Allison Ward

2014-01-01

Student engagement is an important consideration for teachers and administrators because it is explicitly associated with achievement. What the authors call the ABC's of engagement they outline as: Affective engagement, Behavioral engagement, and Cognitive engagement. They also present "Three Things Every Teacher Needs to Know about…

Engaging with Assessment: Increasing Student Engagement through Continuous Assessment

Science.gov (United States)

Holmes, Naomi

2018-01-01

Student engagement is intrinsically linked to two important metrics in learning: student satisfaction and the quality of the student experience. One of the ways that engagement can be influenced is through careful curriculum design. Using the knowledge that many students are "assessment-driven," a low-stakes continuous weekly summative…

University student’s engagement: development of the University Student Engagement Inventory (USEI

Directory of Open Access Journals (Sweden)

João Maroco

2016-01-01

Full Text Available Abstract Student engagement is a key factor in academic achievement and degree completion, though there is much debate about the operationalization and dimensionality of this construct. The goal of this paper is to describe the development of an psycho-educational oriented measure – the University Student Engagement Inventory (USEI. This measure draws on the conceptualization of engagement as a multidimensional construct, including cognitive, behavioural and emotional engagement. Participants were 609 Portuguese University students (67 % female majoring in Social Sciences, Biological Sciences or Engineering and Exact Sciences. The content, construct and predictive validity, and reliability of the USEI were tested. The validated USEI was composed of 15 items, and supported the tri-factorial structure of student engagement. We documented evidence of adequate reliability, factorial, convergent and discriminant validities. USEI’s concurrent validity, with the Utrecht Work Engagement Scale-Student Survey, and the predictive validity for self-reported academic achievement and intention to dropout from school were also observed.

Engaging Military Fathers in a Reflective Parenting Program: Lessons from Strong Families Strong Forces

Science.gov (United States)

DeVoe, Ellen R.; Paris, Ruth

2015-01-01

Through Strong Families Strong Forces, a reflective parenting program for military families with young children, we were privileged to work with contemporary military fathers who served in the post-9/11 conflicts in Afghanistan and Iraq. Due to this work, the authors gained valuable insight into the complexity of fathering during wartime, the…

Relationship quality and student engagement

Science.gov (United States)

Culver, Jennifer

The purpose of this study was to examine the qualities of support, relatedness, and negative interaction within parent-child and teacher-student relationships and their association with cognitive, psychological, and behavioral engagement. Additionally, this study explored the contributions of cognitive and psychological engagement on behavioral engagement. The role of gender, grade, and ethnicity on relationship quality and engagement was also considered. Participants (n=311) were students in grades three through five from a suburban school district in southeastern Michigan. Perceptions of teacher-student relationship quality varied by grade level. In general, younger students reported greater teacher support and relatedness in comparison to older students. Conversely, older students perceived greater conflict within the teacher-student relationship. Student engagement also varied by grade level, with younger students reporting greater engagement than older students. Ethnicity also contributed to variance in student engagement, with African American students reporting significantly more engagement than Caucasian or Multiracial students. Teacher-student relationship quality was a significant predictor of student engagement, even after controlling for student characteristics and parent-child relationship variables. Results of path analysis revealed that cognitive and psychological engagement contributed significantly to behavioral engagement.

Stud manipulating device

International Nuclear Information System (INIS)

Bunyan, T.W.

1980-01-01

A device for inserting and removing studs from bores in a workpiece, for example a nuclear reactor vessel, comprises manipulating devices for operating on individual studs, each capable of tensioning a stud slackening a working nut on the stud, and subsequently removing the stud from the bore. A ring has dogs which can engage working nut recesses to interlock with the nut against relative rotation. Motors coupled to the ring rotate the working nut. A top nut is coupled to the motors to rotate the nut and screw it onto the stud. The top nut with other device parts can be raised and lowered on a tube by a hydraulic actuator. A hydraulic load cell between the top nut and a stool on the workpiece is pressurised to tension the stud by means of the top nut and thus facilitate rotation of the working nut when tightening or slackening. A dog clutch mechanism engages a stud end fitting against relative axial and rotational movement. The mechanism is raised and lowered on a guide member by an actuator. The mechanism has a tubular member and the drive coupling for the motors to the top nut includes a tubular member. Tubular members carry teeth which are engaged when the top nut is raised and the clutch mechanism is lowered, to provide a coupling between the motors and the mechanism for rotating the stud. (U.K.)

Evaluation of deflection forces of orthodontic wires with different ligation types

Directory of Open Access Journals (Sweden)

José Fernando Castanha HENRIQUES

2017-07-01

Full Text Available Abstract The aim of this study was to evaluate deflection forces of orthodontic wires of different alloys engaged into conventional brackets using several ligation types. Stainless steel, conventional superelastic nickel-titanium and thermally activated nickel-titanium archwires tied into conventional brackets by a ring-shaped elastomeric ligature (RSEL, a 8-shaped elastomeric ligature (8SEL and a metal ligature (ML were tested. A clinical simulation device was created especially for this study and forces were measured with an Instron Universal Testing Machine. For the testing procedure, the block representing the maxillary right central incisor was moved 0.5 and 1 mm bucco-lingually at a constant speed of 2 mm/min, and the forces released by the wires were recorded, in accordance with the ISO 15841 guidelines. In general, the RSEL showed lighter forces, while 8SEL and ML showed higher values. At the 0.5 mm deflection, the 8SEL presented the greatest force, but at the 1.0 mm deflection the ML had a statistically similar force. Based on our evaluations, to obtain lighter forces, the thermally activated nickel-titanium wire with the RSEL are recommended, while the steel wire with the 8SEL or the ML are recommended when larger forces are desired. The ML exhibited the highest force increase with increased deflections, compared with the elastomeric ligatures.

Geophysicists' views about public engagement

Science.gov (United States)

Besley, J. C.; Dudo, A.; Yuan, S.

2016-12-01

The proposed talk would present the results of 2016 survey of American Geophysical Union members (n = 2040) about public engagement. This survey took place as part of a broader, NSF funded, study of engagement views across eight different U.S.-based scientific societies. The presentation would include data about geophysicists' past engagement behavior and willingness to engage alongside data about engagement attitudes, perceived norms (i.e. beliefs about whether peers engage and value engagement), and perceived efficacy (i.e., scientists' beliefs about their own communication skills and the impact of engagement). The presentation would also include results that describe scientists' overall goals for engagement (e.g., increasing support for specific policy positions, changing citizen behavior, etc.), as well as their communication-specific objectives (e.g., increasing knowledge, increase excitement, etc.). All of the results would be put in the context of equivalent results from scientists from seven other societies across a variety of fields, including chemistry, biology, and the social sciences. Three themes that would be emphasized in the presentation include (1) the fact that there are substantial commonalities in engagement views across scientific fields, (2) the important role that perceived engagement skill (efficacy) appears to play in predicting engagement willingness, and (3) a lack of evidence that scientists are thinking about engagement in strategic ways. Strategic engagement, in this regard, would involve setting clear goals and then choosing activities that the social science of science communication suggests might allow one to achieve those goals. The presentation would conclude with thoughts about what might be done to improve the effectiveness of science communication training.

Socially responsible investment engagement

NARCIS (Netherlands)

Goessling, T.; Buijter, Bas; Freeman, R.E.; Kujala, J.; Sachs, S.

2017-01-01

This study explores engagement in socially responsible investment (SRI) processes. More specifically, it researches the impact of shareholder salience on the success of engagement activities. The research question asks: What is the relationship between shareholder salience and engagement effort

PERARES: Public Engagement with Research and Research Engagement with Society

NARCIS (Netherlands)

Steinhaus, Norbert; Mulder, Henk A.J.

2014-01-01

PERARES is a four-year project funded by the European Community's Seventh Framework Programme which started in 2010. The acronym stands for "Public Engagement with Research and Research Engagement with Society”. The project brings together Science Shops, Civil Society Organisations (CSOs) and

The United States Marine Corps: The 911 Force in the Post-9/11 World

Science.gov (United States)

2007-02-23

increased efforts to engage narco-crime syndicate threats such as the Revolutionary Armed Forces of Columbia (FARC), which is largely responsible for...discord. The United States should view this as an opportunity. As New York Times columnist James Traub notes, If we believe that a model of development

Influence of defect size and localization on the engagement of reverse Hill-Sachs lesions.

Science.gov (United States)

Moroder, Philipp; Runer, Armin; Kraemer, Manuel; Fierlbeck, Johann; Niederberger, Alfred; Cotofana, Sebastian; Vasvari, Imre; Hettegger, Bernhard; Tauber, Mark; Hurschler, Christof; Resch, Herbert

2015-03-01

Reverse Hill-Sachs (RHS) lesions can cause recurrent posterior shoulder instability because of engagement with the posterior glenoid rim; however, the effect of defect size and localization have yet to be determined. Both size and localization are critical for the engagement of an RHS defect with the posterior glenoid rim. Controlled laboratory study. Ten RHS defects with predefined extent and localization were created through an anterolateral rotator cuff sparing approach in 10 fresh-frozen cadaveric shoulder specimens using a custom-made saw guide. Computed tomography scans of all specimens were completed, and standardized measurements were performed to determine the size (alpha angle) and localization (beta angle) of the defect as well as a combination of both parameters (gamma angle). Internal rotation motions were imposed on the shoulder joint in different arm positions and with varying amount of posterior translation by means of a robot-assisted shoulder simulator. The association between engagement of the defects and the defined parameters (alpha, beta, and gamma angles) was analyzed. In 0° of abduction, a cutoff value between engaging and nonengaging defects of 37.5° for the alpha angle (100% sensitivity; 75% specificity; area under the curve [AUC], 0.875; P = .055) and 36.5° for the beta angle (100% sensitivity; 25% specificity; AUC, 0.708; P = .286) was determined. The gamma angle showed the highest discriminatory power (AUC, 0.938; P = .025) with a cutoff value of 85.5° rendering 100% sensitivity and 75% specificity in the prediction of engagement. An increase in the applied posterior translation force decreased the degrees of internal rotation necessary before engagement occurred. No engagement occurred during internal rotation with the arm in 60° of abduction or 60° of flexion. The size and localization of RHS defects are both critical factors for engagement. The combination of both parameters in terms of the gamma angle measurement might be a

A Remedy to Crises: Danish Special Operations Forces in Whole-of-Government Stabilization Engagements

Science.gov (United States)

2016-06-01

special operations forces, capacity building, state building 15. NUMBER OF PAGES 89 16. PRICE CODE 17. SECURITY CLASSIFICATION OF REPORT... psychology , beliefs (such as religion), and behaviors.”66 This knowledge is essential for decision makers who maneuver not only against adversaries, but...To further influence and inform target audiences, the military uses a variety of information-operation capabilities, including psychological

Students Engaged in Learning

Science.gov (United States)

Ismail, Emad A.; Groccia, James E.

2018-01-01

Engaging students in learning is a basic principle of effective undergraduate education. Outcomes of engaging students include meaningful learning experiences and enhanced skills in all learning domains. This chapter reviews the influence of engaging students in different forms of active learning on cognitive, psychomotor, and affective skill…

How Preservice Teachers Engage in the Process of (De)Colonization: Findings from an International Field Experience in Honduras

Science.gov (United States)

Sharma, Suniti; Rahatzad, Jubin; Phillion, JoAnn

2013-01-01

Critical multicultural education and its promise of cultural inclusion face a crisis induced by powerful neoliberal forces that view education as an economic enterprise rather than open dialogue and inclusive pedagogies. With this in mind, this article uses interpretive phenomenology to examine how US American preservice teachers engage in the…

Student Engagement in Assessments: What Students and Teachers Find Engaging

Science.gov (United States)

Bae, Soung; Kokka, Kari

2016-01-01

Although research has shown that student engagement is strongly related to performance on assessment tasks, especially for traditionally underserved subgroups of students, increasing student engagement has not been the goal of standardized tests of content knowledge. Recent state and federal policies, however, are changing the assessment…

Genomic dissection of variation in clutch size and egg mass in a wild great tit (Parus major) population.

Science.gov (United States)

Santure, Anna W; De Cauwer, Isabelle; Robinson, Matthew R; Poissant, Jocelyn; Sheldon, Ben C; Slate, Jon

2013-08-01

Clutch size and egg mass are life history traits that have been extensively studied in wild bird populations, as life history theory predicts a negative trade-off between them, either at the phenotypic or at the genetic level. Here, we analyse the genomic architecture of these heritable traits in a wild great tit (Parus major) population, using three marker-based approaches - chromosome partitioning, quantitative trait locus (QTL) mapping and a genome-wide association study (GWAS). The variance explained by each great tit chromosome scales with predicted chromosome size, no location in the genome contains genome-wide significant QTL, and no individual SNPs are associated with a large proportion of phenotypic variation, all of which may suggest that variation in both traits is due to many loci of small effect, located across the genome. There is no evidence that any regions of the genome contribute significantly to both traits, which combined with a small, nonsignificant negative genetic covariance between the traits, suggests the absence of genetic constraints on the independent evolution of these traits. Our findings support the hypothesis that variation in life history traits in natural populations is likely to be determined by many loci of small effect spread throughout the genome, which are subject to continued input of variation by mutation and migration, although we cannot exclude the possibility of an additional input of major effect genes influencing either trait. © 2013 John Wiley & Sons Ltd.

Counterbalance of cutting force for advanced milling operations

Science.gov (United States)

Tsai, Nan-Chyuan; Shih, Li-Wen; Lee, Rong-Mao

2010-05-01

The goal of this work is to concurrently counterbalance the dynamic cutting force and regulate the spindle position deviation under various milling conditions by integrating active magnetic bearing (AMB) technique, fuzzy logic algorithm and an adaptive self-tuning feedback loop. Since the dynamics of milling system is highly determined by a few operation conditions, such as speed of spindle, cut depth and feedrate, therefore the dynamic model for cutting process is more appropriate to be constructed by experiments, instead of using theoretical approach. The experimental data, either for idle or cutting, are utilized to establish the database of milling dynamics so that the system parameters can be on-line estimated by employing the proposed fuzzy logic algorithm as the cutting mission is engaged. Based on the estimated milling system model and preset operation conditions, i.e., spindle speed, cut depth and feedrate, the current cutting force can be numerically estimated. Once the current cutting force can be real-time estimated, the corresponding compensation force can be exerted by the equipped AMB to counterbalance the cutting force, in addition to the spindle position regulation by feedback of spindle position. On the other hand, for the magnetic force is nonlinear with respect to the applied electric current and air gap, the characteristics of the employed AMB is investigated also by experiments and a nonlinear mathematic model, in terms of air gap between spindle and electromagnetic pole and coil current, is developed. At the end, the experimental simulations on realistic milling are presented to verify the efficacy of the fuzzy controller for spindle position regulation and the capability of the dynamic cutting force counterbalance.

Experiments in engagement: Designing public engagement with science and technology for capacity building.

Science.gov (United States)

Selin, Cynthia; Rawlings, Kelly Campbell; de Ridder-Vignone, Kathryn; Sadowski, Jathan; Altamirano Allende, Carlo; Gano, Gretchen; Davies, Sarah R; Guston, David H

2017-08-01

Public engagement with science and technology is now widely used in science policy and communication. Touted as a means of enhancing democratic discussion of science and technology, analysis of public engagement with science and technology has shown that it is often weakly tied to scientific governance. In this article, we suggest that the notion of capacity building might be a way of reframing the democratic potential of public engagement with science and technology activities. Drawing on literatures from public policy and administration, we outline how public engagement with science and technology might build citizen capacity, before using the notion of capacity building to develop five principles for the design of public engagement with science and technology. We demonstrate the use of these principles through a discussion of the development and realization of the pilot for a large-scale public engagement with science and technology activity, the Futurescape City Tours, which was carried out in Arizona in 2012.

Transnational television audiences and modes of engagement: studying audience engagement as a set of experiences

DEFF Research Database (Denmark)

Keinonen, Heidi; Jensen, Pia Majbritt; Esser, Andrea

2018-01-01

Audience engagement is attracting increasing attention in various academic disciplines. Recently, the industry- and technology-oriented conceptualizations of engagement have been challenged by a more audience-oriented understanding. This article aims at contributing to the development of a more...... nuanced audience-oriented approach. First, we make a theoretical argument by bringing various key theories together and, second, we present an empirical contribution by analysing audience engagement as a set of experiences. Our analysis builds on the empirical material produced by conducting two rounds...... and ritualistic engagement, ludic engagement. We also discovered that audiences at times get disengaged or opt to actively resist engagement....

Measuring patient engagement: development and psychometric properties of the Patient Health Engagement (PHE) Scale.

Science.gov (United States)

Graffigna, Guendalina; Barello, Serena; Bonanomi, Andrea; Lozza, Edoardo

2015-01-01

Beyond the rhetorical call for increasing patients' engagement, policy makers recognize the urgency to have an evidence-based measure of patients' engagement and capture its effect when planning and implementing initiatives aimed at sustaining the engagement of consumers in their health. In this paper, authors describe the Patient Health Engagement Scale (PHE-scale), a measure of patient engagement that is grounded in rigorous conceptualization and appropriate psychometric methods. The scale was developed based on our previous conceptualization of patient engagement (the PHE-model). In particular, the items of the PHE-scale were developed based on the findings from the literature review and from interviews with chronic patients. Initial psychometric analysis was performed to pilot test a preliminary version of the items. The items were then refined and administered to a national sample of chronic patients (N = 382) to assess the measure's psychometric performance. A final phase of test-retest reliability was performed. The analysis showed that the PHE Scale has good psychometric properties with good correlation with concurrent measures and solid reliability. Having a valid and reliable measure to assess patient engagement is the first step in understanding patient engagement and its role in health care quality, outcomes, and cost containment. The PHE Scale shows a promising clinical relevance, indicating that it can be used to tailor intervention and assess changes after patient engagement interventions.

Measuring Student Engagement in the Online Course: The Online Student Engagement Scale (OSE)

Science.gov (United States)

Dixson, Marcia D.

2015-01-01

Student engagement is critical to student learning, especially in the online environment, where students can often feel isolated and disconnected. Therefore, teachers and researchers need to be able to measure student engagement. This study provides validation of the Online Student Engagement scale (OSE) by correlating student self-reports of…

Constituting Public Engagement

DEFF Research Database (Denmark)

Davies, Sarah Rachael

2013-01-01

understanding of science to those of public engagement with science and technology (PEST), and the histories, or genealogies, of such models. Data from two qualitative studies-a case study of one of the United Kingdom'ssix Beacons for Public Engagement and a study of contract research staff-are used......This article uses data from two U.K. studies in order to explore the meanings attached to public engagement. It focuses on two issues of importance to contemporary discussions of science communication: the degree to which there has been a smooth transition, in practice, from models of public...... to characterize the ways in which U.K. academic communities understand PEST. It is argued that engagement is construed as multiple, relational, and outcomes oriented, with seven key outcomes ranging from better research to empowered individuals. These differences are traced to personal and professional...

The West-African Special Operations Forces: Development and Integration in the Context of the Sub-Saharan Growing Threats

Science.gov (United States)

2016-06-10

Consequently, criminal groups and armed militant gangs have engaged in kidnappings, extortion, car bombings, murder, and other forms of violent attacks...under severe financial constraints, limiting their access to late-model, “high- tech ” weapons and to substantial quantities of materiel. The example...tool, the Special Forces “the fact Special Forces proved today”: the 2014- 2019 military planning law takes it into account, by integrating it into

Measuring user engagement

CERN Document Server

Lalmas, Mounia; Yom-Tov, Elad

2014-01-01

User engagement refers to the quality of the user experience that emphasizes the positive aspects of interacting with an online application and, in particular, the desire to use that application longer and repeatedly. User engagement is a key concept in the design of online applications (whether for desktop, tablet or mobile), motivated by the observation that successful applications are not just used, but are engaged with. Users invest time, attention, and emotion in their use of technology, and seek to satisfy pragmatic and hedonic needs. Measurement is critical for evaluating whether online

Good, better, engaged? The effect of company-initiated customer engagement behavior on shareholder value

NARCIS (Netherlands)

Beckers, Sander F.M.; van Doorn, Jenny; Verhoef, Peter C.

In today’s connected world, customer engagement behaviors are very important. Many companies launch initiatives to stimulate customer engagement. However, despite evidence that customer engagement behavior also matters to share-holders, academic research on the firm value consequences of customer

Impaction Force Influences Taper-Trunnion Stability in Total Hip Arthroplasty.

Science.gov (United States)

Danoff, Jonathan R; Longaray, Jason; Rajaravivarma, Raga; Gopalakrishnan, Ananthkrishnan; Chen, Antonia F; Hozack, William J

2018-01-31

This study investigated the influence of femoral head impaction force, number of head strikes, the energy sequence of head strikes, and head offset on the strength of the taper-trunnion junction. Thirty titanium-alloy trunnions were mated with 36-mm zero-offset cobalt-chromium femoral heads of corresponding taper angle. A drop tower impacted the head with 2.5J or 8.25J, resulting in 6 kN or 14 kN impaction force, respectively, in a single strike or combinations of 6 kN + 14 kN or 14 kN + 14 kN. In addition, ten 36-mm heads with -5 and +5 offset were impacted with sequential 14 kN + 14 kN strikes. Heads were subsequently disassembled using a screw-driven mechanical testing frame, and peak distraction force was recorded. Femoral head pull-off force was 45% the strike force, and heads struck with a single 14 kN impact showed a pull-off force twice that of the 6 kN group. Two head strikes with the same force did not improve pull-off force for either 6 kN (P = .90) or 14 kN (P = .90). If the forces of the 2 impactions varied, but either impact measured 14 kN, a 51% higher pull-off force was found compared to impactions of either 6 kN or 6 kN + 6 kN. Femoral head offset did not significantly change the pull-off force among -5, 0, and +5 heads (P = .37). Femoral head impaction force influenced femoral head trunnion-taper stability, whereas offset did not affect pull-off force. Multiple head strikes did not add additional stability, as long as a single strike achieved 14 kN force at the mallet-head impactor interface. Insufficient impaction force may lead to inadequate engagement of the trunnion-taper junction. Copyright © 2018 Elsevier Inc. All rights reserved.

Engaged work teams in healthy companies: drivers, processes, and outcomes of team work engagement

OpenAIRE

Torrente Barberà, Pedro

2014-01-01

This PhD thesis analyses work engagement in the context of work teams taking a collective, psychosocial perspective. Throughout this thesis, the following topics will be addressed: 1) the state-of-the-art in the topic of team work engagement, 2) the measurement of team work engagement, 3) the association of team work engagement with other relevant individual-level constructs and how it fits in traditional research models in the field of Positive Occupational Health Psychology, 4) the antecede...

Within-clutch variation in yolk testosterone as an adaptive maternal effect to modulate avian sibling competition: evidence from a comparative study.

Science.gov (United States)

Muller, Martina; Groothuis, Ton G G

2013-01-01

In many species, embryos are exposed to maternal hormones in utero, in the egg, or in the seed. In birds, mothers deposit substantial testosterone into their eggs, which enhances competitive ability of offspring. These maternal testosterone concentrations vary systematically within clutches in different patterns and may enable mothers to adaptively fine-tune competitive hierarchies within broods. We performed a comparative analysis to investigate this hypothesis using a broad set of avian species. We expected species with small size differences among siblings (arising from small hatching asynchrony or slow growth rates) to aim for survival of the whole brood in good years and therefore compensate last-hatching eggs with relatively more testosterone. We expected species with large size differences among siblings (large hatching asynchrony or fast growth rates) to produce surplus young as insurance against failed offspring and to facilitate elimination of redundant surplus young by bestowing last-hatching eggs with relatively less testosterone. As predicted, we found that maternal testosterone compensation to last-hatching eggs is stronger when size differences among siblings become smaller. Maternal testosterone compensation to last-hatching eggs also correlated negatively with hatching asynchrony and growth rates. These findings provide evidence for correlated evolution of several maternal effects that together support different maternal reproductive strategies.

PAEA Accreditation Task Force Briefing Paper: Moving Toward Profession-Defined, Outcomes-Based Accreditation.

Science.gov (United States)

Bondy, Mary Jo; Fletcher, Sara; Lane, Steven

2017-12-01

In anticipation of a revision to the Standards for Accreditation, the Phyisician Assistant Education Association (PAEA) charged a small task force to develop a strategy for engaging its members in the revision process. Rather than focusing on the current Standards, the task force members recommend a backward design approach to determine the desired outcomes of a successful revision to the Standards. Ultimately, the group believes that shifting to a profession-defined, outcomes-based model for accreditation will allow for greater innovation in physician assistant education and reduce the strain on programs facing resource limitations, particularly clinical site shortages. Task force members value accreditation and urge a paradigm shift in the Standards revision process to focus on meaningful educational outcomes that lead to enhanced program quality and patient safety.

Engagement in Games: Developing an Instrument to Measure Consumer Videogame Engagement and Its Validation

Directory of Open Access Journals (Sweden)

Amir Zaib Abbasi

2017-01-01

Full Text Available The aim of the study is to develop a new instrument to measure engagement in videogame play termed as consumer videogame engagement. The study followed the scale development procedure to develop an instrument to measure the construct of consumer videogame engagement. In this study, we collected the data in two different phases comprising study 1 (n=136 and study 2 (n=270. We employed SPSS 22.0 for exploratory factor analysis using study 1 respondents to explore the factors for consumer videogame engagement and reliability analysis. Results of EFA resulted with six-factor solution. We further used SmartPLS 3.0 software on study 2 respondents to further confirm the six-factor solution as reflective measurement model on the first-order level, and three second-order formative constructs on the second-order or higher-order level as formative measurement model. Results of the reflective measurement model and formative measurement model evidenced that consumer videogame engagement has strong psychometric properties and is a valid instrument to measure engagement in videogame play. Results also confirmed that consumer videogame engagement is a multidimensional construct as well as a reflective-formative construct. The study is unique in its investigation as it develops an instrument to measure engagement in videogame play which comprises the cognitive, affective, and behavioral dimensions.

Students individual engagement in GIS

DEFF Research Database (Denmark)

Madsen, Lene Møller; Christiansen, Frederik V; Rump, Camilla Østerberg

2014-01-01

This paper develops two sets of concepts to theorize why students engage differently in Geographical Information Systems (GIS). These theoretical concepts are used as an analytical lens to explore empirical data on the experiences and engagement of students enrolled in an undergraduate GIS course...... in planning and management. The analysis shows that both the theoretical perspectives and the custom and didactical contract are important to understand students' engagement in GIS. However, it is the personal desiderata that are the key to understanding the students' different engagement. Further, a temporal...... dimension and contextual awareness are important in understanding students' engagement in a broader perspective....

The Engagement Gap

DEFF Research Database (Denmark)

Tartari, Valentina; Salter, Ammon

2013-01-01

Recently, debate on women in academic science has been extended to academics' engagement with industry. We suggest that women tend to engage less in industry collaboration than their male colleagues of similar status. We argue that differences are mitigated by the presence of other women and by s...

Indonesian Teacher Engagement Index (ITEI): An Emerging Concept of Teacher Engagement in Indonesia

Science.gov (United States)

Sasmoko; Doringin, F.; Indrianti, Y.; Goni, A. M.; Ruliana, P.

2018-02-01

This paper presents a new concept of teacher engagement in Indonesia. The various studies in this paper examine various perspectives and even criticize the initial research on teacher engagement, so as to build the concept of different teacher engagement and in accordance with the Indonesian context so that it can be implemented and has direct impact as a guideline on improving the quality of teachers and education personnel in Indonesia. The method used in this paper is the Neuroresearch research method focused on exploratory research. The conclusion of this research is the development of Indonesian Teacher Engagement Index concept (ITEI) as a concept that describes the condition of teachers who experienced various psychological conditions positively, actively participate in building positive education, able to show good performance, have supportive competence, have national character as Characteristic of Indonesia and able to show the nationalism leadership engagement.

General Plan-Based Environmental Impact Analysis Process Environmental Assessment, Altus Air Force Base

Science.gov (United States)

2009-11-01

Level Lmax Maximum Sound Level LOP Letter of Procedure LTM Long-term monitoring MACA Mid-Air Collision Avoidance MFH Military Family Housing mgd...users. Additionally, the Air Force proactively engages in a program of public outreach to aviators, publishing Mid-Air Collision Avoidance ( MACA ...operating under VFR. The MACA contains information on preferred flight tracks, operational characteristics of high-performance military aircraft, and

Engagement Means Everyone

Science.gov (United States)

Patton, Carol

2012-01-01

Employee engagement is not just HR's responsibility. While HR is responsible for the process of measuring and driving engagement, improving it is actually everyone's responsibility. And that means reducing the barriers to productivity to drive business performance. Training departments can play a pivotal role. Their job is to enhance curriculum or…

Team spirit makes the difference: the interactive effects of team work engagement and organizational constraints during a military operation on psychological outcomes afterwards.

Science.gov (United States)

Boermans, S M; Kamphuis, W; Delahaij, R; van den Berg, C; Euwema, M C

2014-12-01

This article prospectively explores the effects of collective team work engagement and organizational constraints during military deployment on individual-level psychological outcomes afterwards. Participants were 971 Dutch peacekeepers within 93 teams who were deployed between the end of 2008 and beginning of 2010, for an average of 4 months, in the International Security Assistance Force. Surveys were administered 2 months into deployment and 6 months afterwards. Multi-level regression analyses demonstrated that team work engagement during deployment moderated the relation between organizational constraints and post-deployment fatigue symptoms. Team members reported less fatigue symptoms after deployment if they were part of highly engaged teams during deployment, particularly when concerns about organizational constraints during deployment were high. In contrast, low team work engagement was related to more fatigue symptoms, particularly when concerns about organizational constraints were high. Contrary to expectations, no effects for team work engagement or organizational constraints were found for post-traumatic growth. The present study highlights that investing in team work engagement is important for those working in highly demanding jobs. © 2014 John Wiley & Sons, Ltd.

A "Coach Approach" to Staff Engagement

Directory of Open Access Journals (Sweden)

Margaret Macmillan

2011-11-01

Full Text Available The speed of change is challenging libraries to redevelop themselves in ways we have never seen before. Rising costs and changing customer expectations are forcing staff to continuously learn new skills, adapt to new technologies and work more closely in collaboration with others in response to this unpredictable environment. At the same time library leaders need to communicate regularly with staff and to motivate them to dialogue with each other about the value of the library service that they provide to the community. A creative approach to building flexibility, resilience and staff engagement has become essential for survival. Coaching is a creative, innovative and effective communications tool that is now considered to be one of the most important ways to encourage employees to continue to learn and develop. Its greatest impact is in building leadership and staff engagement. Communicating with “a coach approach” or coaching mindset is a powerful way for library leaders to connect with others where the flow and exchange is positive and there is a mutual benefit of contribution and collaboration, expanded knowledge and innovation. The basics of fostering “a coach approach” with library staff requires an understanding of the importance of “reframing” one’s personal attitudes and perspectives, appreciating the art of focused listening and the impact of positive acknowledgement, learning to ask the right questions and formulating action plans for continued success. It is a learned skill that requires a commitment to practice but is one that will ultimately demonstrate positive results.

Engagement of nurses in their profession. Qualitative study on engagement.

Science.gov (United States)

García-Sierra, Rosa; Fernández-Castro, Jordi; Martínez-Zaragoza, Fermín

To identify common issues of nurses with high engagement to enable us to develop the construct as it applies to nursing in more depth. Based on the constructivist paradigm and with a phenomenological approach, a qualitative content analysis was conducted using an inductive approach. Participants were nurses working in direct care in different healthcare areas. The sample size was determined by data saturation and 15 participants were interviewed. The units of meaning were grouped into 11 subcategories, and then into 7 categories termed vigour, dedication, reward, autonomy, social support, conciliation and attributes of nurses. Then these categories were grouped into 3 major themes: job characteristics, characteristics of organizations, and individual characteristics. Having high engagement does not mean ignoring the negative aspects of work and organizations. Nurses who maintain high engagement are also affected by the negative aspects, however the assessment of positive aspects such as enjoying the work, the meaning of being a nurse, reward and autonomy enable the process of depletion of engagement to be overcome. In view of the findings, we propose reconceptualising the construct, taking the features of nursing into account. Copyright © 2017 Elsevier España, S.L.U. All rights reserved.

Our health and theirs: forced migration, othering, and public health.

Science.gov (United States)

Grove, Natalie J; Zwi, Anthony B

2006-04-01

This paper uses 'othering' theory to explore how forced migrants are received in developed countries and considers the implications of this for public health. It identifies a variety of mechanisms by which refugees, asylum seekers and irregular migrants are positioned as 'the other' and are defined and treated as separate, distant and disconnected from the host communities in receiving countries. The paper examines how this process has the potential to affect health outcomes both for individuals and communities and concludes that public health must engage with and challenge this othering discourse. It argues that public health practitioners have a critical role to play in reframing thinking about health services and health policies for forced migrants, by promoting inclusion and by helping shape a narrative which integrates and values the experiences of this population.

Operations of human resources engagement

OpenAIRE

Δημητρέλη, Αλεξάνδρα

2017-01-01

This current study, attempts to shed light on the relationship between HR Operations and employee engagement by testing the relationship empirically. More specifically, it looks at how employee engagement could be embedded into day-to-day human resources operations. Employee engagement is a topic that is repeatedly being discussed in most of the HR forums, articles and journals in the recent past. Employers recognize that truly engage and motivate employee’s produce impressive levels of in...

Teacher Narratives and Student Engagement: Testing Narrative Engagement Theory in Drug Prevention Education

Science.gov (United States)

Miller-Day, Michelle; Hecht, Michael L.; Krieger, Janice L.; Pettigrew, Jonathan; Shin, YoungJu; Graham, John

2015-01-01

Testing narrative engagement theory, this study examines student engagement and teachers’ spontaneous narratives told in a narrative-based drug prevention curriculum. The study describes the extent to which teachers share their own narratives in a narrative-based curriculum, identifies dominant narrative elements, forms and functions, and assesses the relationships among teacher narratives, overall lesson narrative quality, and student engagement. One hundred videotaped lessons of the keepin’ it REAL drug prevention curriculum were coded and the results supported the claim that increased narrative quality of a prevention lesson would be associated with increased student engagement. The quality of narrativity, however, varied widely. Implications of these results for narrative-based prevention interventions and narrative pedagogy are discussed. PMID:26690668

Engaging Stakeholders in Curriculum Development

Science.gov (United States)

Wood, Jo Nell

2010-01-01

This article investigates the importance of parent and community engagement in curriculum development, along with curriculum leadership, engaging stakeholders, and the importance of curriculum. Parent and community member engagement is examined in light of curriculum committee participation as reported by Missouri superintendents. Survey responses…

How emotion context modulates unconscious goal activation during motor force exertion.

Science.gov (United States)

Blakemore, Rebekah L; Neveu, Rémi; Vuilleumier, Patrik

2017-02-01

Priming participants with emotional or action-related concepts influences goal formation and motor force output during effort exertion tasks, even without awareness of priming information. However, little is known about neural processes underpinning how emotional cues interact with action (or inaction) goals to motivate (or demotivate) motor behaviour. In a novel functional neuroimaging paradigm, visible emotional images followed by subliminal action or inaction word primes were presented before participants performed a maximal force exertion. In neutral emotional contexts, maximum force was lower following inaction than action primes. However, arousing emotional images had interactive motivational effects on the motor system: Unpleasant images prior to inaction primes increased force output (enhanced effort exertion) relative to control primes, and engaged a motivation-related network involving ventral striatum, extended amygdala, as well as right inferior frontal cortex. Conversely, pleasant images presented before action (versus control) primes decreased force and activated regions of the default-mode network, including inferior parietal lobule and medial prefrontal cortex. These findings show that emotional context can determine how unconscious goal representations influence motivational processes and are transformed into actual motor output, without direct rewarding contingencies. Furthermore, they provide insight into altered motor behaviour in psychopathological disorders with dysfunctional motivational processes. Copyright © 2016 Elsevier Inc. All rights reserved.

Engaging men in health care.

Science.gov (United States)

Malcher, Greg

2009-03-01

Engaging men in health care involves a multifaceted approach that has as its main principle the recognition that men consume health care differently to women. This article identifies barriers to engaging men in health care and offers potential and existing solutions to overcome these barriers in a range of health care settings. The concept of multiple masculinities recognises that not all men can be engaged via a particular technique or strategy. The perception that men are disinterested in their health is challenged and a range of approaches discussed, both in the community and in health care facilities. In the general practice setting opportunities exist for the engagement of men at the reception desk and waiting room, as well as during the consultation. Use of the workplace in engaging men is discussed. Future activities to build the capacity of health care providers to better engage men are identified and the role of policy and program development is addressed.

Engaging the aging workforce: the relationship between perceived age similarity, satisfaction with coworkers, and employee engagement.

Science.gov (United States)

Avery, Derek R; McKay, Patrick F; Wilson, David C

2007-11-01

Business publications and the popular press have stressed the importance of creating conditions for meaningful employee expression in work roles, also known as engagement. Few empirical studies, however, have examined how individual or situational factors relate to engagement. Consequently, this study examines the interplay between employee age, perceived coworker age composition, and satisfaction with older (older than 55) and younger (younger than 40) coworkers on engagement using a sample of 901 individuals employed in the United Kingdom. Results indicated that satisfaction with one's coworkers related significantly to engagement. Moreover, perceived age similarity was associated with higher levels of engagement among older workers when they were highly satisfied with their coworkers over 55 and lower levels of engagement when they were not. (c) 2007 APA

Engaging Conversationally: A Method for Engaging Students in Their Learning and Examining Instruction

Directory of Open Access Journals (Sweden)

Michael Kiener

2008-08-01

Full Text Available Under the principles of the scholarship of teaching and learning and action research this study sought to examine how an instructor created and facilitated engagement in his students. The research was primarily undertaken to further define the middle range theory of mutual engagement. Theoretical sampling was used to analyze approximately 100 pieces of data that included instructor notes, teaching observations, feedback from conference presentations, student assessments, and end of semester student evaluations. Engaging conversationally (EC emerged as the phenomenon that described the instructor’s engagement in the learning process. EC was an ongoing cyclical pattern of inquiry that included preparing, reflecting and modeling. Interconnected in the pattern of inquiry were personality traits, counselor education, and teaching philosophy.

RELATIONSHIPS AMONG COMPONENTS OF ENGAGEMENT RISK

Directory of Open Access Journals (Sweden)

EVREN DILEK SENGUR

2012-01-01

Full Text Available Accounting scandals exploded at the beginning of 2000s and the collapse of Arthur Andersen highlighted the importance of implementing engagement risk management strategies in audit firms. Engagement risk refers the overall risk associated with an audit engagement and it consists of three components: client's business risk, auditor's business risk, and audit risk. The main purpose of this study is to describe each components of engagement risk and explain relations among them. Additionally, the paper points out the importance of engagement risk management throughout the audit and demonstrates engagement risk management strategies at client acceptance/ continuance, planning and completion of audit.

Student Engagement: Body, Mind and Heart – A Proposal for an Embedded Multi-Dimensional Student Engagement Framework

OpenAIRE

Pickford, R

2016-01-01

This paper considers student engagement in the context of a diverse higher education population and explores what institutions can do to impact positively on student engagement. The paper takes as its starting point the goals of higher education and the purposes of student engagement and reflects on the politicisation of student engagement, and the relative positioning of the student and the higher education institution in relation to student engagement. The paper suggests conditions for and ...

Students' Engagement with Learning Technologies

Science.gov (United States)

Larkin, Derek; Huett, Kim C.

2013-01-01

This paper seeks to add to the discussion surrounding young adults' relationship and engagement with learning technologies, exploring whether they naturally engage with these technologies when the use of them is either compulsory or optional. We discuss our findings in relation to whether young people are truly engaging with technologies or…

Variation in levels of reactive oxygen species is explained by maternal identity, sex and body-size-corrected clutch size in a lizard

Science.gov (United States)

Olsson, Mats; Wilson, Mark; Uller, Tobias; Mott, Beth; Isaksson, Caroline

2009-01-01

Many organisms show differences between males and females in growth rate and crucial life history parameters, such as longevity. Considering this, we may expect levels of toxic metabolic by-products of the respiratory chain, such as reactive oxygen species (ROS), to vary with age and sex. Here, we analyse ROS levels in female Australian painted dragon lizards ( Ctenophorus pictus) and their offspring using fluorescent probes and flow cytometry. Basal level of four ROS species (singlet oxygen, peroxynitrite, superoxide and H2O2) measured with a combined marker, and superoxide measured specifically, varied significantly among families but not between the sexes. When blood cells from offspring were chemically encouraged to accelerate the electron transport chain by mitochondrial uncoupling, net superoxide levels were three times higher in daughters than sons (resulting in levels outside of the normal ROS range) and varied among mothers depending on offspring sex (significant interaction between maternal identity and offspring sex). In offspring, there were depressive effects on ROS of size-controlled relative clutch size, which relies directly on circulating levels of vitellogenin, a confirmed antioxidant in some species. Thus, levels of reactive oxygen species varies among females, offspring and in relation to reproductive investment in a manner that makes its regulatory processes likely targets of selection.

Employee Engagement: A Literature Review

Directory of Open Access Journals (Sweden)

Dharmendra MEHTA

2013-12-01

Full Text Available Motivated and engaged employees tend to contribute more in terms of organizational productivity and support in maintaining a higher commitment level leading to the higher customer satisfaction. Employees Engagement permeates across the employee-customer boundary, where revenue, corporate goodwill, brand image are also at stake. This paper makes an attempt to study the different dimensions of employee engagement with the help of review of literature. This can be used to provide an overview and references on some of the conceptual and practical work undertaken in the area of the employee engagement practices.

Approaching Engagement towards Human-Engaged Computing

DEFF Research Database (Denmark)

Niksirat, Kavous Salehzadeh; Sarcar, Sayan; Sun, Huatong

2018-01-01

Debates regarding the nature and role of HCI research and practice have intensified in recent years, given the ever increasingly intertwined relations between humans and technologies. The framework of Human-Engaged Computing (HEC) was proposed and developed over a series of scholarly workshops to...

What Is Student Engagement?

Science.gov (United States)

Groccia, James E.

2018-01-01

This chapter reviews the history and various definitions of student engagement and proposes a multidimensional model from which one can develop a variety of engagement opportunities that lead to a rich and challenging higher education experience.

Public engagement on global health challenges.

Science.gov (United States)

Cohen, Emma R M; Masum, Hassan; Berndtson, Kathryn; Saunders, Vicki; Hadfield, Tom; Panjwani, Dilzayn; Persad, Deepa L; Minhas, Gunjeet S; Daar, Abdallah S; Singh, Jerome A; Singer, Peter A

2008-05-20

Experience with public engagement activities regarding the risks and benefits of science and technology (S&T) is growing, especially in the industrialized world. However, public engagement in the developing world regarding S&T risks and benefits to explore health issues has not been widely explored. This paper gives an overview about public engagement and related concepts, with a particular focus on challenges and benefits in the developing world. We then describe an Internet-based platform, which seeks to both inform and engage youth and the broader public on global water issues and their health impacts. Finally, we outline a possible course for future action to scale up this and similar online public engagement platforms. The benefits of public engagement include creating an informed citizenry, generating new ideas from the public, increasing the chances of research being adopted, increasing public trust, and answering ethical research questions. Public engagement also fosters global communication, enables shared experiences and methodology, standardizes strategy, and generates global viewpoints. This is especially pertinent to the developing world, as it encourages previously marginalized populations to participate on a global stage. One of the core issues at stake in public engagement is global governance of science and technology. Also, beyond benefiting society at large, public engagement in science offers benefits to the scientific enterprise itself. Successful public engagement with developing world stakeholders will be a critical part of implementing new services and technologies. Interactive engagement platforms, such as the Internet, have the potential to unite people globally around relevant health issues.

Public engagement on global health challenges

Directory of Open Access Journals (Sweden)

Minhas Gunjeet S

2008-05-01

Full Text Available Abstract Background Experience with public engagement activities regarding the risks and benefits of science and technology (S&T is growing, especially in the industrialized world. However, public engagement in the developing world regarding S&T risks and benefits to explore health issues has not been widely explored. Methods This paper gives an overview about public engagement and related concepts, with a particular focus on challenges and benefits in the developing world. We then describe an Internet-based platform, which seeks to both inform and engage youth and the broader public on global water issues and their health impacts. Finally, we outline a possible course for future action to scale up this and similar online public engagement platforms. Results The benefits of public engagement include creating an informed citizenry, generating new ideas from the public, increasing the chances of research being adopted, increasing public trust, and answering ethical research questions. Public engagement also fosters global communication, enables shared experiences and methodology, standardizes strategy, and generates global viewpoints. This is especially pertinent to the developing world, as it encourages previously marginalized populations to participate on a global stage. One of the core issues at stake in public engagement is global governance of science and technology. Also, beyond benefiting society at large, public engagement in science offers benefits to the scientific enterprise itself. Conclusion Successful public engagement with developing world stakeholders will be a critical part of implementing new services and technologies. Interactive engagement platforms, such as the Internet, have the potential to unite people globally around relevant health issues.

Game Engagement Theory and Adult Learning

Science.gov (United States)

Whitton, Nicola

2011-01-01

One of the benefits of computer game-based learning is the ability of certain types of game to engage and motivate learners. However, theories of learning and engagement, particularly in the sphere of higher education, typically fail to consider gaming engagement theory. In this article, the author examines the principles of engagement from games…

Constraints on temperature-dependent sex determination in the leopard gecko (Eublepharis macularius): response to Kratochvil et al.

Science.gov (United States)

Huang, Victoria; Sakata, Jon T; Rhen, Turk; Coomber, Patricia; Simmonds, Sarah; Crews, David

2008-12-01

Kratochvil et al. (Naturwissenschaften 95:209-215, 2008) reported recently that in the leopard gecko (Eublepharis macularius) of the family Eublepharidae with temperature-dependent sex determination (TSD), clutches in which eggs were incubated at the same temperature produce only same-sex siblings. Interpreting this result in light of studies of sex steroid hormone involvement in sex determination, they suggested that maternally derived yolk steroid hormones could constrain sex-determining mechanisms in TSD reptiles. We have worked extensively with this species and have routinely incubated clutches at constant temperatures. To test the consistency of high frequency same-sex clutches across different incubation temperatures, we examined our records of clutches at the University of Texas at Austin from 1992 to 2001. We observed that clutches in which eggs were incubated at the same incubation temperature produced mixed-sex clutches as well as same-sex clutches. Furthermore, cases in which eggs within a clutch were separated and incubated at different temperatures produced the expected number of mixed-sex clutches. These results suggest that maternal influences on sex determination are secondary relative to incubation temperature effects.

A Strategy To Increase United States Air Force Fighter Pilot Retention And Morale: Legendary Ace Robin Olds On The Silver Screen

Science.gov (United States)

2016-02-16

Olds led an extraordinary life. Both the film industry and the Air Force could collaborate on a joint venture for mutual benefit to share his unique...realistic film by using Joseph Campbell’s monomyth heroic formula. The film industry has an intertwined history with the military. The first movies...counter the fighter pilot retention challenge. • First recommendation: The Air Force should engage the film industry to investigate and scope the

Engaging stakeholder networks

Energy Technology Data Exchange (ETDEWEB)

Svendsen, A. [CoreRelation Consulting Inc., Delta, BC (Canada)]|[Simon Fraser Univ., Burnaby, BC (Canada); Laberge, M. [Simon Fraser Univ., Burnaby, BC (Canada)

2004-07-01

Management philosophies concerning stakeholder engagement were reviewed. This presentation provided guidelines for managers working from a sustainability value creation framework who wish to develop more effective ways to engage with stakeholders and high stakes issues that cross political, social and organizational boundaries. It was suggested that conflicts over resources, the demand for participation and the increasing power of Non-Governmental Organizations have all contributed to the increased need for stakeholder engagement. A review of different types of stakeholders was provided. Earlier strategies of managing stakeholders were examined, in which externalities such as environmental cost were not accounted for. By contrast, the emerging management philosophy presented here stressed a recognition that long term survival relied on the good health of external and internal environments. Core business strategies were discussed with reference to core values. It was suggested that a longer term focus, inclusiveness, and integration were beneficial to businesses as a whole. A case study of Clayoquot Sound was presented. The concept of social capital was examined. Individual and collective learning were evaluated. A model for engaging stakeholder networks was presented as well as a step by step procedural guide, which included the creation of a solid foundation; organizational alignment; strategy; the importance of asking questions; trust building; evaluation; and renewal. Challenges to stakeholder engagement included finding resources; ensuring consistency; patience; a tendency in business to measure success in short term payoffs; and maintaining a stakeholder perspective. It was concluded that the benefits of a sustainability value creation framework for businesses far outweighed any initial disadvantages. refs., tabs., figs.

Composing for Energy Engagement

DEFF Research Database (Denmark)

Schick, Lea

carefully designed to be invisible, unnoticed, and un-engaging, a green transition will most likely make energy more visible and one of the major challenges proves to be how to re-design for more and for ‘the right’ kinds of energy engagement. This challenge is not only taken up by engineers and policy...... to be a dynamic and changeable ‘thing’ emerging through socio-technical relations and infrastructural environments. As the different cases ‘compose’ relations between people, energy, infrastructures, and environmental issues differently, they make possible specific kinds of engagement and not others...

Understanding Engagement in Dementia Through Behavior. The Ethographic and Laban-Inspired Coding System of Engagement (ELICSE and the Evidence-Based Model of Engagement-Related Behavior (EMODEB

Directory of Open Access Journals (Sweden)

Giulia Perugia

2018-05-01

Full Text Available Engagement in activities is of crucial importance for people with dementia. State of the art assessment techniques rely exclusively on behavior observation to measure engagement in dementia. These techniques are either too general to grasp how engagement is naturally expressed through behavior or too complex to be traced back to an overall engagement state. We carried out a longitudinal study to develop a coding system of engagement-related behavior that could tackle these issues and to create an evidence-based model of engagement to make meaning of such a coding system. Fourteen elderlies with mild to moderate dementia took part in the study. They were involved in two activities: a game-based cognitive stimulation and a robot-based free play. The coding system was developed with a mixed approach: ethographic and Laban-inspired. First, we developed two ethograms to describe the behavior of participants in the two activities in detail. Then, we used Laban Movement Analysis (LMA to identify a common structure to the behaviors in the two ethograms and unify them in a unique coding system. The inter-rater reliability (IRR of the coding system proved to be excellent for cognitive games (kappa = 0.78 and very good for robot play (kappa = 0.74. From the scoring of the videos, we developed an evidence-based model of engagement. This was based on the most frequent patterns of body part organization (i.e., the way body parts are connected in movement observed during activities. Each pattern was given a meaning in terms of engagement by making reference to the literature. The model was tested using structural equation modeling (SEM. It achieved an excellent goodness of fit and all the hypothesized relations between variables were significant. We called the coding system that we developed the Ethographic and Laban-Inspired Coding System of Engagement (ELICSE and the model the Evidence-based Model of Engagement-related Behavior (EMODEB. To the best of our

Analytic description of the frictionally engaged in-plane bending process incremental swivel bending (ISB)

Science.gov (United States)

Frohn, Peter; Engel, Bernd; Groth, Sebastian

2018-05-01

Kinematic forming processes shape geometries by the process parameters to achieve a more universal process utilizations regarding geometric configurations. The kinematic forming process Incremental Swivel Bending (ISB) bends sheet metal strips or profiles in plane. The sequence for bending an arc increment is composed of the steps clamping, bending, force release and feed. The bending moment is frictionally engaged by two clamping units in a laterally adjustable bending pivot. A minimum clamping force hindering the material from slipping through the clamping units is a crucial criterion to achieve a well-defined incremental arc. Therefore, an analytic description of a singular bent increment is developed in this paper. The bending moment is calculated by the uniaxial stress distribution over the profiles' width depending on the bending pivot's position. By a Coulomb' based friction model, necessary clamping force is described in dependence of friction, offset, dimensions of the clamping tools and strip thickness as well as material parameters. Boundaries for the uniaxial stress calculation are given in dependence of friction, tools' dimensions and strip thickness. The results indicate that changing the bending pivot to an eccentric position significantly affects the process' bending moment and, hence, clamping force, which is given in dependence of yield stress and hardening exponent. FE simulations validate the model with satisfactory accordance.

Methadone continuation versus forced withdrawal on incarceration in a combined US prison and jail: a randomised, open-label trial.

Science.gov (United States)

Rich, Josiah D; McKenzie, Michelle; Larney, Sarah; Wong, John B; Tran, Liem; Clarke, Jennifer; Noska, Amanda; Reddy, Manasa; Zaller, Nickolas

2015-07-25

Methadone is an effective treatment for opioid dependence. When people who are receiving methadone maintenance treatment for opioid dependence are incarcerated in prison or jail, most US correctional facilities discontinue their methadone treatment, either gradually, or more often, abruptly. This discontinuation can cause uncomfortable symptoms of withdrawal and renders prisoners susceptible to relapse and overdose on release. We aimed to study the effect of forced withdrawal from methadone upon incarceration on individuals' risk behaviours and engagement with post-release treatment programmes. In this randomised, open-label trial, we randomly assigned (1:1) inmates of the Rhode Island Department of Corrections (RI, USA) who were enrolled in a methadone maintenance-treatment programme in the community at the time of arrest and wanted to remain on methadone treatment during incarceration and on release, to either continuation of their methadone treatment or to usual care--forced tapered withdrawal from methadone. Participants could be included in the study only if their incarceration would be more than 1 week but less than 6 months. We did the random assignments with a computer-generated random permutation, and urn randomisation procedures to stratify participants by sex and race. Participants in the continued-methadone group were maintained on their methadone dose at the time of their incarceration (with dose adjustments as clinically indicated). Patients in the forced-withdrawal group followed the institution's standard withdrawal protocol of receiving methadone for 1 week at the dose at the time of their incarceration, then a tapered withdrawal regimen (for those on a starting dose >100 mg, the dose was reduced by 5 mg per day to 100 mg, then reduced by 3 mg per day to 0 mg; for those on a starting dose >100 mg, the dose was reduced by 3 mg per day to 0 mg). The main outcomes were engagement with a methadone maintenance-treatment clinic after release from

International Engagement Strategy

Science.gov (United States)

2017-06-14

agreements and issue legal guidance on international law and intellectual property issues. ICPO will play an important role in realizing this vision and...the U.S. and its partners. INTERNATIONAL ENGAGEMENT VISION The directorate’s vision is for global S&T engagements to take advantage of emerging ideas...reduce risk to U.S. and partner countries, and increase their resilience; and Establish enduring relationships to provide access to

Engagement of Students Teaching Assistants

DEFF Research Database (Denmark)

Schlichter, Bjarne Rerup; Brandt, Charlotte J.

2016-01-01

This paper reports from five years experiences of engaging young student teaching assistants into the continuously development of a course by involving them in research on pedagogical as well as other themes from the course. The purpose of the paper is to pave the road for a more engaged and inte......This paper reports from five years experiences of engaging young student teaching assistants into the continuously development of a course by involving them in research on pedagogical as well as other themes from the course. The purpose of the paper is to pave the road for a more engaged...... are identified accompanied with suggestions for further research....

Engaging With Reality

DEFF Research Database (Denmark)

Bondebjerg, Ib

to engage us with reality. Engaging with Reality investigates some of the major global themes as they are reflected in documentaries from the USA, UK and Denmark. Engaging with Reality is a contribution to comparative, transnational studies of documentary in contemporary media culture. By comparing......Documentaries play an important role in the increasingly global media culture that has been developing over the last few decades. Despite its many different forms and genres, all documentaries claim a special relation to the way things are in the world, and they each attempt in their own way...... documentaries in three different countries dealing with the same global themes, the book contributes to a broader and deeper understanding of our global media culture. The book deals with documentaries as part of a new form of cosmopolitan narratives, as part of new, global forms of social imagination...

Fertilizing a Patient Engagement Ecosystem to Innovate Healthcare: Toward the First Italian Consensus Conference on Patient Engagement.

Science.gov (United States)

Graffigna, Guendalina; Barello, Serena; Riva, Giuseppe; Savarese, Mariarosaria; Menichetti, Julia; Castelnuovo, Gianluca; Corbo, Massimo; Tzannis, Alessandra; Aglione, Antonio; Bettega, Donato; Bertoni, Anna; Bigi, Sarah; Bruttomesso, Daniela; Carzaniga, Claudia; Del Campo, Laura; Donato, Silvia; Gilardi, Silvia; Guglielmetti, Chiara; Gulizia, Michele; Lastretti, Mara; Mastrilli, Valeria; Mazzone, Antonino; Muttillo, Giovanni; Ostuzzi, Silvia; Perseghin, Gianluca; Piana, Natalia; Pitacco, Giuliana; Polvani, Gianluca; Pozzi, Massimo; Provenzi, Livio; Quaglini, Giulia; Rossi, Mariagrazia; Varese, Paola; Visalli, Natalia; Vegni, Elena; Ricciardi, Walter; Bosio, A Claudio

2017-01-01

Currently we observe a gap between theory and practices of patient engagement. If both scholars and health practitioners do agree on the urgency to realize patient engagement, no shared guidelines exist so far to orient clinical practice. Despite a supportive policy context, progress to achieve greater patient engagement is patchy and slow and often concentrated at the level of policy regulation without dialoguing with practitioners from the clinical field as well as patients and families. Though individual clinicians, care teams and health organizations may be interested and deeply committed to engage patients and family members in the medical course, they may lack clarity about how to achieve this goal. This contributes to a wide "system" inertia-really difficult to be overcome-and put at risk any form of innovation in this filed. As a result, patient engagement risk today to be a buzz words, rather than a real guidance for practice. To make the field clearer, we promoted an Italian Consensus Conference on Patient Engagement (ICCPE) in order to set the ground for drafting recommendations for the provision of effective patient engagement interventions. The ICCPE will conclude in June 2017. This document reports on the preliminary phases of this process. In the paper, we advise the importance of "fertilizing a patient engagement ecosystem": an oversimplifying approach to patient engagement promotion appears the result of a common illusion. Patient "disengagement" is a symptom that needs a more holistic and complex approach to solve its underlined causes. Preliminary principles to promote a patient engagement ecosystem are provided in the paper.

Engaging with farmers as entrepreneurs and partners: experiences with a self-assessment tool for farmer'organisations (FORCE)

NARCIS (Netherlands)

Schrader, T.

2010-01-01

Governments, donors and companies increasingly perceive small farmers and their organisations as development actors and business partners. A practical self-assessment tool, 'Farmers Organizations Reviewing Capacities and Entrepreneurship' (FORCE), takes up the challenge to translate the recognition

On making engagement tangible

NARCIS (Netherlands)

van den Broek, Egon; Spink, A.J.; Grieco, F; Krips, O.E.; Loijens, L.W.S.; Noldus, L.P.J.J.; Zimmerman, P.H.

2012-01-01

In this article the complexity of the construct engagement and three theories on this topic are discussed. Csikszentmihalyi's theory of flow is taken as starting point for the measurement of engagement. The measurement of each of its eight aspects is discussed, including its pros and cons.

The Engaged University: International Perspectives on Civic Engagement. International Studies in Higher Education

Science.gov (United States)

Watson, David; Hollister, Robert; Stroud, Susan E.; Babcock, Elizabeth

2011-01-01

"The Engaged University" is a comprehensive empirical account of the global civic engagement movement in higher education. In universities around the world, something extraordinary is underway. Mobilizing their human and intellectual resources, institutions of higher education are directly tackling community problems--combating poverty,…

Student Engagement In Inclusive Classrooms

DEFF Research Database (Denmark)

Rangvid, Beatrice Schindler

There is general agreement that to thrive and learn at their best, students must be engaged. However, schools face a particular challenge to provide a suitable and engaging learning environment for SEN (special educational needs) students who are educated in general education classes. Using data......-students as for other students. This highlights the need for better inclusion initiatives aimed at strengthening engagement of SEN-students in regular classrooms....

Engagement in Games: Developing an Instrument to Measure Consumer Videogame Engagement and Its Validation

OpenAIRE

Abbasi, Amir Zaib; Ting, Ding Hooi; Hlavacs, Helmut

2017-01-01

The aim of the study is to develop a new instrument to measure engagement in videogame play termed as consumer videogame engagement. The study followed the scale development procedure to develop an instrument to measure the construct of consumer videogame engagement. In this study, we collected the data in two different phases comprising study 1 (n=136) and study 2 (n=270). We employed SPSS 22.0 for exploratory factor analysis using study 1 respondents to explore the factors for consumer vide...

Rules of engagement: perspectives on stakeholder engagement for genomic biobanking research in South Africa.

Science.gov (United States)

Staunton, Ciara; Tindana, Paulina; Hendricks, Melany; Moodley, Keymanthri

2018-02-27

Genomic biobanking research is undergoing exponential growth in Africa raising a host of legal, ethical and social issues. Given the scientific complexity associated with genomics, there is a growing recognition globally of the importance of science translation and community engagement (CE) for this type of research, as it creates the potential to build relationships, increase trust, improve consent processes and empower local communities. Despite this level of recognition, there is a lack of empirical evidence of the practise and processes for effective CE in genomic biobanking in Africa. To begin to address this vacuum, 17 in-depth face to face interviews were conducted with South African experts in genomic biobanking research and CE to provide insight into the process, benefits and challenges of CE in South Africa. Emerging themes were analysed using a contextualised thematic approach. Several themes emerged concerning the conduct of CE in genomic biobanking research in Africa. Although the literature tends to focus on the local community in CE, respondents in this study described three different layers of stakeholder engagement: community level, peer level and high level. Community level engagement includes potential participants, community advisory boards (CAB) and field workers; peer level engagement includes researchers, biobankers and scientists, while high level engagement includes government officials, funders and policy makers. Although education of each stakeholder layer is important, education of the community layer can be most challenging, due to the complexity of the research and educational levels of stakeholders in this layer. CE is time-consuming and often requires an interdisciplinary research team approach. However careful planning of the engagement strategy, including an understanding of the differing layers of stakeholder engagement, and the specific educational needs at each layer, can help in the development of a relationship based on trust

Engaging boundary objects in OMS and STS? Exploring the subtleties of layered engagement

NARCIS (Netherlands)

Zeiss, R.; Groenewegen, P.

2009-01-01

This paper considers STS aspirations to engage with the field of Organization and Management Studies (OMS). It does so by investigating the employability of the concept of boundary object in OMS. Through an extensive literature review, the paper shows that rather than a simple engagement between STS

Fertilizing a Patient Engagement Ecosystem to Innovate Healthcare: Toward the First Italian Consensus Conference on Patient Engagement

Directory of Open Access Journals (Sweden)

Guendalina Graffigna

2017-06-01

Full Text Available Currently we observe a gap between theory and practices of patient engagement. If both scholars and health practitioners do agree on the urgency to realize patient engagement, no shared guidelines exist so far to orient clinical practice. Despite a supportive policy context, progress to achieve greater patient engagement is patchy and slow and often concentrated at the level of policy regulation without dialoguing with practitioners from the clinical field as well as patients and families. Though individual clinicians, care teams and health organizations may be interested and deeply committed to engage patients and family members in the medical course, they may lack clarity about how to achieve this goal. This contributes to a wide “system” inertia—really difficult to be overcome—and put at risk any form of innovation in this filed. As a result, patient engagement risk today to be a buzz words, rather than a real guidance for practice. To make the field clearer, we promoted an Italian Consensus Conference on Patient Engagement (ICCPE in order to set the ground for drafting recommendations for the provision of effective patient engagement interventions. The ICCPE will conclude in June 2017. This document reports on the preliminary phases of this process. In the paper, we advise the importance of “fertilizing a patient engagement ecosystem”: an oversimplifying approach to patient engagement promotion appears the result of a common illusion. Patient “disengagement” is a symptom that needs a more holistic and complex approach to solve its underlined causes. Preliminary principles to promote a patient engagement ecosystem are provided in the paper.

Bridging Realty to Virtual Reality: Investigating Gender Effect and Student Engagement on Learning through Video Game Play in an Elementary School Classroom

Science.gov (United States)

Annetta, Leonard; Mangrum, Jennifer; Holmes, Shawn; Collazo, Kimberly; Cheng, Meng-Tzu

2009-01-01

The purpose of this study was to examine students' learning of simple machines, a fifth-grade (ages 10-11) forces and motion unit, and student engagement using a teacher-created Multiplayer Educational Gaming Application. This mixed-method study collected pre-test/post-test results to determine student knowledge about simple machines. A survey…

Should Students Engaged to Their Study? (Academic Burnout and School-Engagement among Students

Directory of Open Access Journals (Sweden)

Fitri Arlinkasari

2017-08-01

Full Text Available Inability to deal with lectures efficiently leads students vulnerable to academic burnout. Burnout contributes to the high dropout rate among students, and this phenomenon has occurred on several universities in Indonesia. To overcome these problems, students should generate the feelings, attitudes and positive attitude towards the academic demands, or known as school engagement. School involvement is a predictor of students’ dropout rate. This study aims to analyze the dropout problem in many private universities in Jakarta by examining the psychological variables: academic burnout and school engagement. 208 students from some private university in Jakarta participated and fulfilled two questionnaires: academic burnout and school engagement that has been modified to suit the college setting. Correlation of the variables showed r= - 0.399 (p = 0.000. This means that school engagement plays a role in reducing academic burnout among students. These findings contribute a reference for academic counseling to support the decreasing of students’ dropout rate.

Clinical engagement: improving healthcare together.

Science.gov (United States)

Riches, E; Robson, B

2014-02-01

Clinical engagement can achieve lasting change in the delivery of healthcare. In October 2011, Healthcare Improvement Scotland formulated a clinical engagement strategy to ensure that a progressive and sustainable approach to engaging healthcare professionals is firmly embedded in its health improvement and public assurance activities. The strategy was developed using a 90-day process, combining an evidence base of best practice and feedback from semi-structured interviews and focus groups. The strategy aims to create a culture where clinicians view working with Healthcare Improvement Scotland as a worthwhile venture, which offers a number of positive benefits such as training, career development and research opportunities. The strategy works towards developing a respectful partnership between Healthcare Improvement Scotland, the clinical community and key stakeholders whereby clinicians' contributions are recognised in a non-financial reward system. To do this, the organisation needs a sustainable infrastructure and an efficient, cost-effective approach to clinical engagement. There are a number of obstacles to achieving successful clinical engagement and these must be addressed as key drivers in its implementation. The implementation of the strategy is supported by an action and resource plan, and its impact will be monitored by a measurement plan to ensure the organisation reviews its approaches towards clinical engagement.

Differential investment and costs during avian incubation determined by individual quality: an experimental study of the common eider (Somateria mollissima).

Science.gov (United States)

Hanssen, Sveinn Are; Erikstad, Kjell Einar; Johnsen, Vigdis; Bustnes, Jan Ove

2003-03-07

Individuals of different quality may have different investment strategies, shaping responses to experimental manipulations, thereby rendering the detection of such patterns difficult. However, previous clutch-size manipulation studies have infrequently incorporated individual differences in quality. To examine costs of incubation and reproductive investment in relation to changes in clutch size, we enlarged and reduced natural clutch sizes of four and five eggs by one egg early in the incubation period in female common eiders (Somateria mollissima), a sea duck with an anorectic incubation period. Females that had produced four eggs (lower quality) responded to clutch reductions by deserting the nest more frequently but did not increase incubation effort in response to clutch enlargement, at the cost of reduced hatch success of eggs. Among birds with an original clutch size of five (higher quality), reducing and enlarging clutch size reduced and increased relative body mass loss respectively without affecting hatch success. In common eiders many females abandon their own ducklings to the care of other females. Enlarging five-egg clutches led to increased brood care rate despite the higher effort spent incubating these clutches, indicating that the higher fitness value of a large brood is increasing adult brood investment. This study shows that the ability to respond to clutch-size manipulations depends on original clutch size, reflecting differences in female quality. Females of low quality were reluctant to increase investment at the cost of lower hatch success, whereas females of higher quality apparently have a larger capacity both to increase incubation effort and brood care investment.

Forced use as a potential cause of gastrocnemius tears during neurologic rehabilitation: a report of 2 cases.

Science.gov (United States)

Fisher, Steve R; Wiggs, Laura L; Ivanhoe, Cindy B

2007-03-01

Broadly defined, forced-use therapy uses specific techniques designed to engage the patient with brain injury in activities that disallow overcompensation with the noninvolved or less involved body segments while forcing the use of the more involved segments. Some applications may involve placing the patient's hemiparetic extremity in a closed-chain weight-bearing activity with therapist support. We describe 2 cases of gastrocnemius muscle tears that occurred during inpatient neurologic rehabilitation that may be attributed to forced use of the hemiplegic lower extremity. Each presented with signs and symptoms indicative of deep vein thrombosis of the calf but was later confirmed with magnetic resonance imaging to be muscle tears. Some closed-chain, forced-use activities may be ill advised in the early stages of rehabilitation or if force generation of the muscle is inadequate to provide a protective response to overstretching. Gastroc-soleus tears should also be considered in the differential diagnosis of unilateral or even bilateral lower-extremity swelling and pain in neurologically impaired patients who are undergoing forced-use therapy.

ENGAGEMENT AS A SOURCE OF POSITIVE CONSUMER ...

African Journals Online (AJOL)

Ederick Stander

The results strengthen the theory of fan engagement, which flows from customer ... proposed. Key words: Fan engagement; Customer engagement theory; Consumer behaviour; ... of football in SA is evolving unremittingly, despite challenging economic .... The engaged fan will more likely attend games at the stadium, as this.

Employee Engagement: A Literature Review

OpenAIRE

Dharmendra MEHTA; Naveen K. MEHTA

2013-01-01

Motivated and engaged employees tend to contribute more in terms of organizational productivity and support in maintaining a higher commitment level leading to the higher customer satisfaction. Employees Engagement permeates across the employee-customer boundary, where revenue, corporate goodwill, brand image are also at stake. This paper makes an attempt to study the different dimensions of employee engagement with the help of review of literature. This can be used to provide an overview and...

Air Force Policy for Advanced Education: Production of Human Capital or Cheap Signals?

Science.gov (United States)

2011-01-01

is not prima facie evidence that all on-base and distance-learning graduate programs offered to military members are devoid of any production of...then becomes whether or not most officers engaged in vol­ untary off- duty education programs do so to augment their promotion opportunities or to...their capability to perform the duties of the next rank. However, members of the board do not have information such as IQ, Air Force Officer Qualifying

Understanding the Emergence of Disruptive Innovation in Air Force Science and Technology Organizations

Science.gov (United States)

2008-03-01

Enabling processes Business models Brand Networks and alliances Product systems Channel 15.2% 11.6 12.4 12.2 11.8 10.6 8.4 8.1 4.7 3.6...Caregiver The Storyteller Brings new learning and insights into the organization by observing human behavior and developing a deep...an engaging experience with those customers. The comparison identified two large differences in the results. Air Force S&T ranked networks and

Work engagement in health professions education.

Science.gov (United States)

van den Berg, Joost W; Mastenbroek, Nicole J J M; Scheepers, Renée A; Jaarsma, A Debbie C

2017-11-01

Work engagement deserves more attention in health professions education because of its positive relations with personal well-being and performance at work. For health professions education, these outcomes have been studied on various levels. Consider engaged clinical teachers, who are seen as better clinical teachers; consider engaged residents, who report committing fewer medical errors than less engaged peers. Many topics in health professions education can benefit from explicitly including work engagement as an intended outcome such as faculty development programs, feedback provision and teacher recognition. In addition, interventions aimed at strengthening resources could provide teachers with a solid foundation for well-being and performance in all their work roles. Work engagement is conceptually linked to burnout. An important model that underlies both burnout and work engagement literature is the job demands-resources (JD-R) model. This model can be used to describe relationships between work characteristics, personal characteristics and well-being and performance at work. We explain how using this model helps identifying aspects of teaching that foster well-being and how it paves the way for interventions which aim to increase teacher's well-being and performance.

Finnish Students’ Engagement in Science Lessons

Directory of Open Access Journals (Sweden)

Janna Linnansaari

2015-05-01

Full Text Available The decreasing number of students who are engaged in science learning has been recognised as a problem. The pre-conditions of engagement and actual engagement were examined using a novel research method to obtain detailed information on Finnish students’ engagement in different situations and to gain a better understanding of this phenomenon. The study’s participants consisted of 68 students (31 girls, 37 boys from 9th grade and 67 students (46 girls, 21 boys from 1st grade in upper secondary school. The research aimed to answer the following question: How does Finnish students’ engagement occur in exact and life science lessons? Participants received smartphones equipped with a smartphone application that included an experience sampling method questionnaire. The smartphones were programmed to emit a signal during every science lesson and otherwise randomly during the day (from 8 am to 8 pm. The results reveal that situation and grade had significant effects on students’ pre-conditions of engagement and actual engagement. Our results also show that girls had the highest interest in life science lessons and boys in exact science lessons.

Engagement in Learning after Errors at Work: Enabling Conditions and Types of Engagement

Science.gov (United States)

Bauer, Johannes; Mulder, Regina H.

2013-01-01

This article addresses two research questions concerning nurses' engagement in social learning activities after errors at work. Firstly, we investigated how this engagement relates to nurses' interpretations of the error situation and perceptions of a safe team climate. The results indicate that the individual estimation of an error as relevant to…

Measuring student engagement among elementary students: pilot of the Student Engagement Instrument--Elementary Version.

Science.gov (United States)

Carter, Chandra P; Reschly, Amy L; Lovelace, Matthew D; Appleton, James J; Thompson, Dianne

2012-06-01

Early school withdrawal, commonly referred to as dropout, is associated with a plethora of negative outcomes for students, schools, and society. Student engagement, however, presents as a promising theoretical model and cornerstone of school completion interventions. The purpose of the present study was to validate the Student Engagement Instrument-Elementary Version (SEI-E). The psychometric properties of this measure were assessed based on the responses of an ethnically diverse sample of 1,943 students from an urban locale. Exploratory and confirmatory factor analyses indicated that the 4-factor model of student engagement provided the best fit for the current data, which is divergent from previous SEI studies suggesting 5- and 6-factor models. Discussion and implications of these findings are presented in the context of student engagement and dropout prevention. (PsycINFO Database Record (c) 2012 APA, all rights reserved).

Engaging patients through your website.

Science.gov (United States)

Snyder, Kimberlee; Ornes, Lynne L; Paulson, Pat

2014-01-01

Legislation requires the healthcare industry to directly engage patients through technology. This paper proposes a model that can be used to review hospital websites for features that engage patients in their healthcare. The model describes four levels of patient engagement in website design. The sample consisted of 130 hospital websites from hospitals listed on 2010 and 2011 Most Wired Hospitals. Hospital websites were analyzed for features that encouraged patient interaction with their healthcare according to the levels in the model. Of the four levels identified in the model, websites ranged from "informing" to "collaborative" in website design. There was great variation of features offered on hospital websites with few being engaging and interactive. © 2012 National Association for Healthcare Quality.

Measuring Engagement at Work: Validation of the Chinese Version of the Utrecht Work Engagement Scale

OpenAIRE

Fong, Ted Chun-tat; Ng, Siu-man

2011-01-01

Background Work engagement is a positive work-related state of fulfillment characterized by vigor, dedication, and absorption. Previous studies have operationalized the construct through development of the Utrecht Work Engagement Scale. Apart from the original three-factor 17-item version of the instrument (UWES-17), there exists a nine-item shortened revised version (UWES-9). Purpose The current study explored the psychometric properties of the Chinese version of the Utrecht Work Engagement ...

Rules of (Student) Engagement

Science.gov (United States)

Buskist, William; Busler, Jessica N.; Kirby, Lauren A. J.

2018-01-01

Teachers often think of student engagement in terms of hands-on activities that get students involved in their courses. They seldom consider the larger aspects of the teaching--learning environment that often influence the extent to which students are willing to become engaged in their coursework. In this chapter, we describe five "rules of…

Students Engaged in Teaching

Science.gov (United States)

Ford, Channing R.; Wilkins, Emily B.; Groccia, James E.

2018-01-01

The role of peer teaching has long been established in academia as a means to foster student engagement in the classroom, increase student learning, and as a way to reduce faculty workload. This chapter highlights the direct and powerful positive impacts of engaging students as teachers upon the student providing the instruction, those receiving…

Cultivating Practitioners of Democratic Civic Engagement

Science.gov (United States)

Keith, Novella Zett

2016-01-01

How can we support campus-based practitioners of civic and community engagement in moving from normalized engagement toward practices that engage others democratically and respectfully across borders created by social race, class, gender, status, and other markers of difference? The article presents a framework derived from practice theory, a…

Control of 4-DOF MR haptic master for medical application

Science.gov (United States)

Oh, Jong-Seok; Choi, Seung-Hyun; Choi, Seung-Bok

2014-03-01

In this work, magnetorheological (MR) based haptic master for robot-assisted minimally invasive surgery (RMIS) is proposed and analyzed. Using a controllable MR fluid, the masters can generate a reflection force with the 4-DOF motion. The proposed master consists of two actuators: MR clutch featuring gimbal mechanism for 2-DOF rotational motion (X and Y axes) and MR clutch attached at gripper of gimbal structures for 1-DOF rotational motion (Z axis) and 1-DOF translational motion. After analyzing the dynamic motion by integrating mechanical and physical properties of the actuators, torque model of the proposed haptic master is derived. For realization of master-slave system, an encoder which can measure position information is integrated with the MR haptic master. In the RMIS system, the measured position is converted as a command signal and sent to the slave robot. In this work, slave and organ of patient are modeled in virtual space. In order to embody a human organ into virtual space, a volumetric deformable object is mathematically formulated by a shape retaining chain linked (S-chain) model. Accordingly, the haptic architecture is established by incorporating the virtual slave with the master device in which the reflection force and desired position originated from the object of the virtual slave and operator of the master, respectively, are transferred to each other. In order to achieve the desired force trajectories, a proportional-integral-derivative (PID) controller is designed and implemented. It has been demonstrated that the effective tracking control performance for the desired motion of reflection force is well presented in time domain.

Are better sleepers more engaged workers? A self-regulatory approach to sleep hygiene and work engagement.

Science.gov (United States)

Barber, Larissa; Grawitch, Matthew J; Munz, David C

2013-10-01

Previous research has emphasized facets of both the organizational environment and individual differences as predictors of work engagement. This study explored sleep hygiene as another important behavioural factor that may be related to work engagement. With a sample of 328 adult workers, we tested a multiple mediator model in which sleep hygiene predicts work engagement through one's appraisals of resource depletion stemming from demands (psychological strain) and general self-regulatory capacity (self-control). Results indicated that individuals who frequently engaged in poor sleep hygiene behaviours had lower self-regulatory capacity, experienced higher subjective depletion and were less engaged at work. Additionally, the path from poor sleep hygiene to decreased work engagement was attributed to perceptions of personal resources that are needed to exert self-regulatory energy at work. This is consistent with current self-regulatory theories suggesting that individuals have a limited amount of resources to allocate to demands and that the depletion of these resources can lead to stress and lower self-regulatory functioning in response to other demands. Specifically, poor sleep hygiene results in the loss of self-regulatory resources needed to be engaged in work tasks by impairing the after-work recovery process. Practical and research implications regarding sleep hygiene interventions for well-being and productivity improvement are discussed. Copyright © 2012 John Wiley & Sons, Ltd.

Work engagement in nursing: a concept analysis.

Science.gov (United States)

Bargagliotti, L Antoinette

2012-06-01

  This article is a report of an analysis of the concept of work engagement. Background.  Work engagement is the central issue for 21st century professionals and specifically for registered nurses. Conceptual clarity about work engagement gives empirical direction for future research and a theoretical underpinning for the myriad studies about nurses and their work environment.   Walker and Avant's method of concept analysis was used. Nursing, business, psychology and health sciences databases were searched using Science Direct, CINAHL, OVID, Academic One File, ABI INFORM and PsycINFO for publications that were: written in English, published between 1990 and 2010, and described or studied work engagement in any setting with any population.   Work engagement is a positive, fulfilling state of mind about work that is characterized by vigour, dedication and absorption. Trust (organizationally, managerially and collegially) and autonomy are the antecedents of work engagement. The outcomes of nurses' work engagement are higher levels of personal initiative that are contagious, decreased hospital mortality rates and significantly higher financial profitability of organizations.   When work engagement is conceptually removed from a transactional job demands-resources model, the relational antecedents of trust and autonomy have greater explanatory power for work engagement in nurses. Untangling the antecedents, attributes and outcomes of work engagement is important to future research efforts. © 2011 Blackwell Publishing Ltd.

What Inverted U Can Do for Your Country: A Curvilinear Relationship Between Confidence in the Social System and Political Engagement.

Science.gov (United States)

Cichocka, Aleksandra; Górska, Paulina; Jost, John T; Sutton, Robbie M; Bilewicz, Michał

2017-08-24

We examined the link between political engagement and the tendency to justify the sociopolitical system. On one hand, confidence in the system should be negatively related to political engagement, insofar as it entails reduced desire for social change; on the other hand, system confidence should also be positively related to political engagement to the extent that it carries an assumption that the system is responsive to citizens' political efforts. Because of the combination of these 2 opposing forces, the motivation for political engagement should be highest at intermediate levels of system confidence. Five studies revealed a negative quadratic relationship between system confidence and normative political engagement. In 2 representative surveys, Polish participants with moderate levels of system confidence were more likely to vote in political elections (Study 1) and to participate in solidarity-based collective action (Study 2). Two field studies demonstrated a negative quadratic relationship between system confidence and actual participation in political demonstrations (gender equality and teachers' protests in Poland; Studies 3 and 4). This pattern of results was further corroborated by analyses of data from 50 countries drawn from the World Value Survey: we observed negative quadratic relationships between system confidence and collective action as well as voting. These relationships were stronger in democratic (vs. nondemocratic) regimes (Study 5). Our results suggest that some degree of system confidence might be useful to stimulate political engagement within the norms of the system. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Engagement through communication

DEFF Research Database (Denmark)

Lykke, Marianne

2018-01-01

In this chapter, we work from the assumption that university engagement can be fostered by addressing the dissemination of scientific knowledge as a communication process, and we explore how university engagement can be encouraged through the communication of scientific knowledge to SMEs (small...... and potentials) in relation to scientific knowledge, which must be taken into account in attempts to communicate scientific knowledge to SMEs. Based on this analysis, we discuss solutions and outline some communicative principles that can contribute with a solution-oriented perspective on how communicating...

Valuing and Evaluating Community-Engaged Scholarship

Science.gov (United States)

Shephard, Kerry; Brown, Kim; Guiney, Tess; Deaker, Lynley

2018-01-01

This article examines the nature of, and need for, evaluation of community-engaged university teaching and research. The research was conducted as part of a larger project aimed at improving institutional understanding of how to best support community-engaged university people. We interviewed 25 community-engaged colleagues, and used a general…

Engaging youth and transferring knowledge

International Nuclear Information System (INIS)

Mantagaris, E.

2011-01-01

Youth engagement is a key component of the work of the Nuclear Waste Management Organization (NWMO) as it collaborates with Canadians to implement Adaptive Phased Management (APM), Canada's plan for the long-term management of used nuclear fuel. Knowledge transfer is an important aspect of APM implementation, which will span several decades and will need to be flexible enough to adjust to changing societal values and new information. By engaging youth, the NWMO is putting in place mechanisms for ongoing societal learning and capacity building, so that future generations will be well-equipped to make decisions and participate in future dialogues on APM. The NWMO convened a Youth Roundtable, comprised of 18- to 25-year-olds with a diversity of backgrounds and experience, to seek advice on the best approaches to engaging youth on this topic. In May 2009, the Roundtable presented its recommendations to the NWMO and its Advisory Council, providing valuable guidance on: development of dynamic messages and communications materials that will resonate with young people; use of new technologies and social media to engage youth where they are already connecting and conversing; and a range of activities to engage youth through the educational system and in their communities. The NWMO has begun to implement many of the Youth Roundtable recommendations and is developing longer-term implementation plans, including a framework for education and outreach to youth. Through its Corporate Social Responsibility (CSR) Program, the NWMO is laying the foundation for greater science and technology literacy and enhanced community engagement among young Canadians. Additionally, the NWMO is working with Aboriginal peoples to develop strategies for further engagement of Aboriginal youth, as part of the organization's ongoing collaborative work with Aboriginal peoples that could be affected by the implementation of APM. Youth engagement will continue to be a NWMO priority moving

Engaging youth and transferring knowledge

Energy Technology Data Exchange (ETDEWEB)

Mantagaris, E. [Nuclear Waste Management Organization, Toronto, ON (Canada)

2011-07-01

Youth engagement is a key component of the work of the Nuclear Waste Management Organization (NWMO) as it collaborates with Canadians to implement Adaptive Phased Management (APM), Canada's plan for the long-term management of used nuclear fuel. Knowledge transfer is an important aspect of APM implementation, which will span several decades and will need to be flexible enough to adjust to changing societal values and new information. By engaging youth, the NWMO is putting in place mechanisms for ongoing societal learning and capacity building, so that future generations will be well-equipped to make decisions and participate in future dialogues on APM. The NWMO convened a Youth Roundtable, comprised of 18- to 25-year-olds with a diversity of backgrounds and experience, to seek advice on the best approaches to engaging youth on this topic. In May 2009, the Roundtable presented its recommendations to the NWMO and its Advisory Council, providing valuable guidance on: development of dynamic messages and communications materials that will resonate with young people; use of new technologies and social media to engage youth where they are already connecting and conversing; and a range of activities to engage youth through the educational system and in their communities. The NWMO has begun to implement many of the Youth Roundtable recommendations and is developing longer-term implementation plans, including a framework for education and outreach to youth. Through its Corporate Social Responsibility (CSR) Program, the NWMO is laying the foundation for greater science and technology literacy and enhanced community engagement among young Canadians. Additionally, the NWMO is working with Aboriginal peoples to develop strategies for further engagement of Aboriginal youth, as part of the organization's ongoing collaborative work with Aboriginal peoples that could be affected by the implementation of APM. Youth engagement will continue to be a NWMO priority moving

Teachers' Cognitive Flexibility on Engagement and Their Ability to Engage Students: A Theoretical and Empirical Exploration

Science.gov (United States)

Stein, Kristy Cooper; Miness, Andrew; Kintz, Tara

2018-01-01

Background: Student engagement is a cognitively complex domain that is often oversimplified in theory and practice. Reliance on a single model overlooks the sophisticated nature of student engagement and can lead to misconceptions and limited understandings that hinder teachers' ability to engage all of their students. Assessing varied models…

Open Innovation and Stakeholder Engagement

Directory of Open Access Journals (Sweden)

Robert Wayne Gould

2012-09-01

Full Text Available The paradox of open innovation lies in the conflict between the practical desire to reap the benefits of open innovation and concern over the risk that others will misappropriate those benefits. Stakeholder theory and recent developments in value creation through stakeholder engagement can assist with reconciliation of this inherent structural risk. The limitations of existing open innovation typologies are identified, and a process-based model of open innovation is proposed. The model is then expanded to include stakeholder engagement. When integrated with stakeholder engagement, open innovation processes can be understood to generate benefits beyond the acquisition of specific information sought from external experts. The addition of stakeholder engagement to the open innovation model allows for greater understanding and easier acceptance of the risks inherent in the open innovation process.

Burnout and Work Engagement Among US Dentists.

Science.gov (United States)

Calvo, Jean Marie; Kwatra, Japneet; Yansane, Alfa; Tokede, Oluwabunmi; Gorter, Ronald C; Kalenderian, Elsbeth

2017-06-30

Burnout is a threat to patient safety. It relates to emotional exhaustion, depersonalization, and lack of personal accomplishment. Work engagement conversely composed of levels of vigor, dedication, and absorption in one's profession. The aim of this study was to examine burnout and work engagement among US dentists. This study used the extensively validated Maslach Burnout Inventory-Human Services Survey and Utrecht Work Engagement Scale to measure burnout in a self-administered survey of 167 US dentists who attended continuing education courses held in Boston, Pittsburg, Iowa City, and Las Vegas. The mean scores on the 3 subscales of Maslach Burnout Inventory-Human Services Survey and Utrecht Work Engagement Scale were computed. The interscale correlations between the components of burnout and work engagement were assessed using Pearson correlations. We used 1-way analysis of variance and independent 2 sample t tests to examine the relationship between burnout and work engagement across sex and various age categories. Prevalence of burnout in our study population was also computed. We observed that 13.2% of our study population experienced burnout and 16.2% of our study population was highly work engaged. There was a statistically significant, unadjusted association between burnout risk and work engagement (χ = 22.51, P work engagement. In this preliminary study, we observed some evidence of burnout among practicing US dentists. It is imperative that the dental profession understands this and works to promote professional practices that increase work engagement and decrease burnout.

Corrected direct force balance method for atomic force microscopy lateral force calibration

International Nuclear Information System (INIS)

Asay, David B.; Hsiao, Erik; Kim, Seong H.

2009-01-01

This paper reports corrections and improvements of the previously reported direct force balance method (DFBM) developed for lateral calibration of atomic force microscopy. The DFBM method employs the lateral force signal obtained during a force-distance measurement on a sloped surface and relates this signal to the applied load and the slope of the surface to determine the lateral calibration factor. In the original publication [Rev. Sci. Instrum. 77, 043903 (2006)], the tip-substrate contact was assumed to be pinned at the point of contact, i.e., no slip along the slope. In control experiments, the tip was found to slide along the slope during force-distance curve measurement. This paper presents the correct force balance for lateral force calibration.

Engagement at work: a review of the literature.

Science.gov (United States)

Simpson, Michelle R

2009-07-01

Engagement at work has emerged as a potentially important employee performance and organizational management topic, however, the definition and measurement of engagement at work, and more specifically, nurse engagement, is poorly understood. The objective of this paper is to examine the current state of knowledge about engagement at work through a review of the literature. This review highlights the four lines of engagement research and focuses on the determinants and consequences of engagement at work. Methodological issues, as identified in the current research, and recommendations for future nurse-based engagement research are provided. A systematic review of the business, organizational psychology, and health sciences and health administration literature about engagement at work (1990-2007) was performed. The electronic databases for Health Sciences and Health Administration (CINAHL, MEDLINE), Business (ABI INFORM), and Psychology (PsycINFO) were systematically searched. Due to the limited amount of research that has examined engagement among the nursing workforce, published research that included varying employee types were included in this review. The selection criteria for this review include those studies that were: (1) written in English and (2) examined engagement at work in employee populations of any type within any work setting. The literature review identified four distinct lines of research that has focused on engagement within the employee work role. Of the 32 engagement-based articles referenced in this paper, a sample of 20 studies report on the examination of antecedents and/or consequences of engagement at work among varying employee types and work settings. Key findings suggest organizational factors versus individual contributors significantly impact engagement at work. A common implication in this body of research was that of the performance-based impact. The study of nurses' work engagement and its relationship to nurses' organizational

Sustaining Student Engagement in Learning Science

Science.gov (United States)

Ateh, Comfort M.; Charpentier, Alicia

2014-01-01

Many students perceive science to be a difficult subject and are minimally engaged in learning it. This article describes a lesson that embedded an activity to engage students in learning science. It also identifies features of a science lesson that are likely to enhance students' engagement and learning of science and possibly reverse students'…

The Engagement Gap

DEFF Research Database (Denmark)

Tartari, Valentina; Salter, Ammon

2015-01-01

In recent years, the debate about the marginality of women in academic science has been extended to academics’ engagement with industry and their commercial efforts. Analyzing multi-source data for a large sample of UK physical and engineering scientists and employing a matching technique...... the presence of women in the local work setting and their wider discipline, and the institutional support for women’s careers in their organization. We explore the implications of these findings for policies to support women’s scientific and technical careers and engagement with industry....

The Future of Student Engagement

Science.gov (United States)

Buskist, William; Groccia, James E.

2018-01-01

This chapter underscores the importance of conceptualizing student engagement as a responsibility shared by all members of the academy and describes how Groccia's multidimensional model can serve as blueprint for future thinking and research on student engagement.

Effective Social Media Engagement for Nonprofits: What Matters?

Directory of Open Access Journals (Sweden)

Julia L Carboni

2015-03-01

Full Text Available We employ public management relationship theory to examine how nonprofits can effectively engage social media stakeholders in two-way communication. Though many nonprofit organizations have a social media presence, there is variance in how well organizations use social media to engage stakeholders. Simply having a social media presence is not enough to engage stakeholders.  We examine Facebook posts of a stratified random sample of youth development organizations to determine what predicts stakeholder engagement. We find the type of Facebook post is a significant predictor of stakeholder engagement.  Longer posts also significantly predict increased stakeholder engagement.  At the organizational level, having many posts is a significant negative predictor of stakeholder engagement, indicating that users may feel bombarded and are less likely to engage.  Increased organizational spending on advertising as a proportion of total budget is positively associated with stakeholder engagement. 

Engagement in Digital Lecture Halls: A Study of Student Course Engagement and Mobile Device use During Lecture

Directory of Open Access Journals (Sweden)

Gwendolyn Witecki

2015-01-01

Full Text Available Universities have experienced increases in technology ownership and usage amongst students entering undergraduate programs. Almost all students report owning a mobile phone and many students view laptops and tablets as educational tools, though they also report using them for non-academic activities during lectures. We explored the relationship between student course engagement and the use of smartphones, laptops, cell phones, and tablets during lecture. Undergraduate students responded to an online survey asking about both course engagement and mobile device habits. Results show that smartphone use was most strongly related to lowered course engagement and while laptop use was related to lowered engagement, it was to a lesser extent. In contrast, overall engagement of students using tablets or cell phones was not significantly different than those who did not.

Professional burnout and work engagement among dentists.

Science.gov (United States)

Te Brake, Hans; Bouman, Anne-Marthe; Gorter, Ronald; Hoogstraten, Johan; Eijkman, Michiel

2007-06-01

A recent development within burnout research is the shift to its conceptual opposite: work engagement. This study aimed to unravel the concepts of burnout and work engagement, and to determine their levels among dentists. A representative sample of 497 Dutch general dental practitioners was included (survey response rate of 59%), consisting of 372 men and 121 women (the gender of 4 dentists remained unknown). The hypothesized three-factor structure of work engagement (vigor, dedication, and absorption), as measured by the Utrecht Work Engagement Scale (UWES), was substantiated among dentists. It was also found that work engagement was related negatively to burnout, as measured by the Maslach Burnout Inventory (MBI). However, a model consisting of a reduced ('core') burnout factor and an 'enhanced' engagement factor (composed of the three original factors plus the burnout factor, personal accomplishment) showed the best fit. Overall burnout levels among dentists are low, and the levels of engagement indicate that dentists have a positive working attitude.

Stakeholder Engagement Through Social Media

DEFF Research Database (Denmark)

Etter, Michael; Castello, Itziar

competing logics of stakeholder engagement: the current (influence logic) and the new logic underlying social media (logic of community). With a longitudinal study of 26 months we observe how engagements failed since managers were not able to integrate certain symbolic and substantive elements of the new......The introduction of new information and communication technologies such social media platforms in organizations results in a new emerging logic of stakeholder engagement around sustainable development issues. We investigate how middle managers of a pharmaceutical corporation navigate between two...... introduced by social media....

Employee Engagement Factor for Organizational Excellence

Directory of Open Access Journals (Sweden)

Tzvetana Stoyanova

2017-03-01

Full Text Available Purpose: The objective of this publication is to identify ways to increase employee engagement in Bulgarian business organizations and identify how such employee engagement affects employee and company performance. Design/methodology/approach: Our research is based on the evaluation of employee engagement methodologies used by well-known companies such as Gallup HCM Advisory Group, Deloitte and Aon Hewitt. Based on these, we derive the factors influencing employee engagement in Bulgarian companies. Findings: This work focuses on management, in recent years, aimed at retaining and developing the best employees, and their evolution into reliable potential leaders of the organization. This is undertaken to maintain and increase the number of those engaged in the business of company employees as well. The management of a successful leader is considered key to increasing employee engagement. Employee commitment implies something special, additional or atypical in the performance of tasks and job role. This is a behaviour that involves innovation, demonstrating initiative via proactive seeking of opportunities that contribute to the company and exceeding the expected standard of employee performance. The findings can strengthen the already-significant role of management. There is no universal way to increase employee engagement and motivation towards increased productivity, activity, and creativity. Research limitations/implications: The study has been undertaken for employees in Bulgaria.

A Meta-Analysis of Middle School Science Engagement

Science.gov (United States)

Aker, Leanna B.

Researchers and educational practitioners have long been concerned with declines in science engagement reported by students as they transition into the middle school setting. Though the operationalization of engagement is still nascent, an emerging consensus on a three-faceted model of student engagement has recently emerged in the research literature (Fredricks, Blumenfeld, & Paris, 2004). Thus, a synthesis of existing primary research of early adolescents' science engagement under this emerging conceptualization was warranted. The results of this meta-analysis indicate that instructional methods, class characteristics and competence predictors had the strongest relationship with self-reported science engagement in early adolescence. These predictors also show the strongest relationship with affective and cognitive engagement sub-types. Though affective and cognitive engagement were well represented in primary studies, behavioral engagement was underrepresented in student self-reports.

What Determines Faculty-Engaged Scholarship?

Science.gov (United States)

Vogelgesang, Lori J.; Denson, Nida; Jayakumar, Uma M.

2010-01-01

This paper examines how faculty and institutional characteristics shape engaged scholarship. Controlling for faculty dispositions, disciplinary differences, and institutional characteristics, the authors examined the impact of perceived institutional support for community partnerships, community-based research, and teaching on faculty engagement.…

Group conflict and faculty engagement

DEFF Research Database (Denmark)

Selmer, Jan; Jonasson, Charlotte; Lauring, Jakob

2013-01-01

In educational settings, substantial scholarly interest has focused on student engagement as an antecedent for educational development and positive school outcomes. Very limited research, however, has focused on the engagement of academic staff members. This may be a crucial oversight because...

Energy and heat balance in wet DCT

Energy Technology Data Exchange (ETDEWEB)

Saxena, Viren; Moser, Alexander; Schaefer, Michael; Ritschel, Michael [BorgWarner Drivetrain Engineering GmbH, Ketsch (Germany)

2012-11-01

Wet clutch systems are well known for their thermal robustness and versatility in a wide range of automotive applications. Conventional automatics have used them for a long time as torque converter lock-up clutches, shift elements and launch clutches. With the development of DCTs, wet clutch technology has evolved in terms of launch and shift performance, controllability, robustness and efficiency. This paper discusses improvements in the wet clutch and their impact on today's vehicle applications in terms of heat and energy management. Thermal robustness is a crucial aspect for an automatic transmission. In addition to the clutch thermal performance, the influence of transmission oil cooler and oil sump warm-up behavior are discussed. Based on our latest development activities, test results and simulations, we shall discuss the latest friction material enhancement and its impact on DCTs in terms of efficiency and performance. Drag loss is a much-discussed topic during the development of wet clutch systems. This paper discusses in detail the cause and break-up of various energy losses in a wet DCT. Efficient energy management strategies for actuation systems, cooling, and lubrication, clutch apply, and pre-selection in modern power trains with engine start / stop are evaluated based on the latest test and simulation results. Finally, the paper summarizes the performance and efficiency optimized moist clutch system. (orig.)

Public Engagement and Nanotechnology in Australia.

Science.gov (United States)

Dalton-Brown, Sally

2016-07-01

Upstream engagement is commonly regarded as necessary for the smooth implementation of new technologies, particularly when there is an impact on health. Is the healthcare context in Australia geared toward such public engagement? There are established engagement practices for issues of healthcare resourcing, for example; however, the situation becomes more complex with the introduction of a new technology such as nanomedicine.

Navigating role forces and the aesthetic|authentic caring dialectic: a novice urban science teacher's developmental trajectory

Science.gov (United States)

Rivera Maulucci, Maria S.

2010-09-01

Examining role forces and resources available to new teachers is crucial to understanding how teachers use and expand cultural, social, and symbolic resources and how they engage teaching for social justice and caring in urban science education. This critical narrative inquiry explores three levels of story. First, the narratives explore my role as a district science staff developer and my efforts to leverage district resources to improve students' opportunities to learn science. Second, the narratives explore the ways in which a novice science teacher, Tina, navigated role forces and the aesthetic|authentic caring dialectic in a high poverty, urban school. A third level of narrative draws on sociological theories of human interaction to explore role forces and how they shaped Tina's developmental trajectory. I describe how Tina expanded cultural, social, and symbolic resources to enact her teaching role.

Why Japanese workers show low work engagement: An item response theory analysis of the Utrecht Work Engagement scale.

Science.gov (United States)

Shimazu, Akihito; Schaufeli, Wilmar B; Miyanaka, Daisuke; Iwata, Noboru

2010-11-05

With the globalization of occupational health psychology, more and more researchers are interested in applying employee well-being like work engagement (i.e., a positive, fulfilling, work-related state of mind that is characterized by vigor, dedication, and absorption) to diverse populations. Accurate measurement contributes to our further understanding and to the generalizability of the concept of work engagement across different cultures. The present study investigated the measurement accuracy of the Japanese and the original Dutch versions of the Utrecht Work Engagement Scale (9-item version, UWES-9) and the comparability of this scale between both countries. Item Response Theory (IRT) was applied to the data from Japan (N = 2,339) and the Netherlands (N = 13,406). Reliability of the scale was evaluated at various levels of the latent trait (i.e., work engagement) based the test information function (TIF) and the standard error of measurement (SEM). The Japanese version had difficulty in differentiating respondents with extremely low work engagement, whereas the original Dutch version had difficulty in differentiating respondents with high work engagement. The measurement accuracy of both versions was not similar. Suppression of positive affect among Japanese people and self-enhancement (the general sensitivity to positive self-relevant information) among Dutch people may have caused decreased measurement accuracy. Hence, we should be cautious when interpreting low engagement scores among Japanese as well as high engagement scores among western employees.

Building new roles and relationships in research: a model of patient engagement research.

Science.gov (United States)

Marlett, Nancy; Shklarov, Svetlana; Marshall, Deborah; Santana, Maria Jose; Wasylak, Tracy

2015-05-01

Patient engagement is influenced by institutional ideologies, professional attitudes and patient readiness to accept new, engaged roles. This article provides an opportunity to consider a new role for patients who are trained to conduct patient experience research using qualitative methods. The emergence of the role of patient engagement researcher was studied using a grounded theory with 21 patients over one-year internship and 125 research participants. Data were collected using tape recordings, field notes and student assignments. These were analyzed using open and selective coding, memoing, categorizing themes. Patients' education level (from high school to PhD), cultural background (immigrant experience, seniors), employment (employed full or part time, receiving disability benefits or retired), age (late 30 s-75) and gender (17 women and four men) were diverse. Main categories (emancipating patient experience; qualifying for research; leading sitting down; working data together; seeding change) are organized by the dialectic of co-creation as the roles of patient and researcher merge. A theoretical model is proposed. The theoretical model provides a glimpse into the process of merging two distinct roles of patient and researcher and in the process unleashes a force for change. The emergence of a dialectic from polar opposite roles is difficult to locate in health or other institutions where power differentials exist but there are indications that this new role might become a template for other merged roles in patient-led medical teams.

Force control tasks with pure haptic feedback promote short-term focused attention.

Science.gov (United States)

Wang, Dangxiao; Zhang, Yuru; Yang, Xiaoxiao; Yang, Gaofeng; Yang, Yi

2014-01-01

Focused attention has great impact on our quality of life. Our learning, social skills and even happiness are closely intertwined with our capacity for focused attention. Attention promotion is replete with examples of training-induced increases in attention capability, most of which rely on visual and auditory stimulation. Pure haptic stimulation to increase attention capability is rarely found. We show that accurate force control tasks with pure haptic feedback enhance short-term focused attention. Participants were trained by a force control task in which information from visual and auditory channels was blocked, and only haptic feedback was provided. The trainees were asked to exert a target force within a pre-defined force tolerance for a specific duration. The tolerance was adaptively modified to different levels of difficulty to elicit full participant engagement. Three attention tests showed significant changes in different aspects of focused attention in participants who had been trained as compared with those who had not, thereby illustrating the role of haptic-based sensory-motor tasks in the promotion of short-term focused attention. The findings highlight the potential value of haptic stimuli in brain plasticity and serve as a new tool to extend existing computer games for cognitive enhancement.

Not putting all their eggs in one basket: bet-hedging despite extraordinary annual reproductive output of desert tortoises

Science.gov (United States)

Lovich, Jeffrey E.; Ennen, Joshua R.; Yackulic, Charles B.; Meyer-Wilkins, Kathie; Agha, Mickey; Loughran, Caleb L.; Bjurlin, Curtis; Austin, Meaghan; Madrak, Sheila V.

2015-01-01

Bet-hedging theory makes the counter-intuitive prediction that, if juvenile survival is low and unpredictable, organisms should consistently reduce short-term reproductive output to minimize the risk of reproductive failure in the long-term. We investigated the long-term reproductive output of an Agassiz's desert tortoise (Gopherus agassizii) population and conformance to a bet-hedging strategy of reproduction in an unpredictable but comparatively productive environment. Most females reproduced every year, even during periods of low precipitation and poor germination of food plants, and the mean percentage of reproducing females did not differ significantly on an annual basis. Although mean annual egg production (clutch size × clutch frequency) differed significantly among years, mean clutch size and mean clutch frequency remained relatively constant. During an El Niño year, mean annual egg production and mean annual clutch frequency were the highest ever reported for this species. Annual egg production was positively influenced by maternal body size but clutch size and clutch frequency were not. Our long-term results confirm earlier conclusions based on short-term research that desert tortoises have a bet-hedging strategy of producing small clutches almost every year. The risk of long-term reproductive failure is minimized in unpredictable environments, both through time by annually producing multiple small clutches over a long reproductive lifespan, even in years of low resource availability, and through space by depositing multiple annual clutches in different locations. The extraordinary annual reproductive output of this population appears to be the result of a typically high but unpredictable biomass of annual food plants at the site relative to tortoise habitat in dryer regions. Under the comparatively productive but unpredictable conditions, tortoises conform to predictions of a bet-hedging strategy of reproduction with relatively small but consistent

Facilitating neurorehabilitation through principles of engagement.

Science.gov (United States)

Danzl, Megan M; Etter, Nicole M; Andreatta, Richard D; Kitzman, Patrick H

2012-01-01

A primary goal of neurorehabilitation is to guide recovery of functional skills after injury through evidence-based interventions that operate to manipulate the sensorimotor environment of the client. While choice of intervention is an important decision for clinicians, we contend it is only one part of producing optimal activity-dependent neuroplastic changes. A key variable in the rehabilitation equation is engagement. Applying principles of engagement may yield greater neuroplastic changes and functional outcomes for clients. We review the principles of neuroplasticity and engagement and their potential linkage through concepts of attention and motivation and strategies such as mental practice and enriched environments. Clinical applications and challenges for enhancing engagement during rehabilitation are presented. Engagement strategies, such as building trust and rapport, motivational interviewing, enhancing the client education process, and interventions that empower clients, are reviewed. Well-controlled research is needed to test our theoretical framework and suggested outcomes. Clinicians may enhance engagement by investing time and energy in the growth and development of the therapeutic relationship with clients, as this is paramount to maintaining clients' investment in continuing therapy and also may act as a driver of neuroplastic changes.

Development of 3 DOF manipulator using ER fluid clutches for reduction of collision force

Science.gov (United States)

Boku, Kazuhiko; Nakamura, Taro

2009-02-01

.With robots and users more commonly sharing space such as in the fields of medicine and home automation, the possibility of a physical collision has increased, even though many robots use actuators with high-ratio gear trains to minimize the effects of impact. We developed a 3-DOF manipulator having a smart flexible joint using an ER fluid and a sensor-equipped pneumatic cushion. Results of position control and collision experiments using the manipulator demonstrated its effectiveness.

Development of 3 DOF manipulator using ER fluid clutches for reduction of collision force

International Nuclear Information System (INIS)

Boku, Kazuhiko; Nakamura, Taro

2009-01-01

Abstract.With robots and users more commonly sharing space such as in the fields of medicine and home automation, the possibility of a physical collision has increased, even though many robots use actuators with high-ratio gear trains to minimize the effects of impact. We developed a 3-DOF manipulator having a smart flexible joint using an ER fluid and a sensor-equipped pneumatic cushion. Results of position control and collision experiments using the manipulator demonstrated its effectiveness.

Development of 3 DOF manipulator using ER fluid clutches for reduction of collision force

Energy Technology Data Exchange (ETDEWEB)

Boku, Kazuhiko; Nakamura, Taro [Chuo University, Faculty of Science and Engineering, Department of Precision Mechanics, 1-13-27 Kasuga, Bunkyo-ku, Tokyo 112-8551 (Japan)], E-mail: k_boku@bio.mech.chuo-u.ac.jp

2009-02-01

Abstract.With robots and users more commonly sharing space such as in the fields of medicine and home automation, the possibility of a physical collision has increased, even though many robots use actuators with high-ratio gear trains to minimize the effects of impact. We developed a 3-DOF manipulator having a smart flexible joint using an ER fluid and a sensor-equipped pneumatic cushion. Results of position control and collision experiments using the manipulator demonstrated its effectiveness.

Shared Governance and Work Engagement in Emergency Nurses.

Science.gov (United States)

Siller, Jennifer; Dolansky, Mary A; Clavelle, Joanne T; Fitzpatrick, Joyce J

2016-07-01

Lack of work engagement in emergency nurses has been linked to increased job turnover, burnout, and lack of job satisfaction. Shared governance is a vehicle that can be used by emergency nursing leaders to increase work engagement among emergency nurses. Research is lacking about the relationship between perceptions of shared governance and work engagement in emergency nurses. In this study we examined the relationship between ED nurses' perceptions of shared governance and work engagement. A descriptive correlation design was used with a convenience sample of 43 emergency nurses recruited through the ENA Web site. Participants completed a demographic questionnaire, the Index of Professional Nursing Governance Tool, and the Utrecht Work Engagement Scale. The mean total work engagement score indicated average engagement (M = 4.4, standard deviation = 1.2). A significant positive relationship was found between shared governance and work engagement, indicating that as perceptions of shared governance increase, work engagement increases (r (41) = 0.62, P emergency nurses. Understanding the relationship between perceptions of shared governance and work engagement in emergency nurses may assist emergency nursing leaders in developing and testing interventions to enhance it. Copyright © 2016 Emergency Nurses Association. Published by Elsevier Inc. All rights reserved.

Engagement Assessment Using EEG Signals

Science.gov (United States)

Li, Feng; Li, Jiang; McKenzie, Frederic; Zhang, Guangfan; Wang, Wei; Pepe, Aaron; Xu, Roger; Schnell, Thomas; Anderson, Nick; Heitkamp, Dean

2012-01-01

In this paper, we present methods to analyze and improve an EEG-based engagement assessment approach, consisting of data preprocessing, feature extraction and engagement state classification. During data preprocessing, spikes, baseline drift and saturation caused by recording devices in EEG signals are identified and eliminated, and a wavelet based method is utilized to remove ocular and muscular artifacts in the EEG recordings. In feature extraction, power spectrum densities with 1 Hz bin are calculated as features, and these features are analyzed using the Fisher score and the one way ANOVA method. In the classification step, a committee classifier is trained based on the extracted features to assess engagement status. Finally, experiment results showed that there exist significant differences in the extracted features among different subjects, and we have implemented a feature normalization procedure to mitigate the differences and significantly improved the engagement assessment performance.

Employee Engagement Factor for Organizational Excellence

OpenAIRE

Tzvetana Stoyanova; Ivaylo Iliev

2017-01-01

Purpose: The objective of this publication is to identify ways to increase employee engagement in Bulgarian business organizations and identify how such employee engagement affects employee and company performance. Design/methodology/approach: Our research is based on the evaluation of employee engagement methodologies used by well-known companies such as Gallup HCM Advisory Group, Deloitte and Aon Hewitt. Based on these, we derive the fac...

Life satisfaction and student engagement in adolescents.

Science.gov (United States)

Lewis, Ashley D; Huebner, E Scott; Malone, Patrick S; Valois, Robert F

2011-03-01

Situated within a positive psychology perspective, this study explored linkages between adolescent students' positive subjective well-being and their levels of engagement in schooling. Specifically, using structural equation modeling techniques, we evaluated the nature and directionality of longitudinal relationships between life satisfaction and student engagement variables. It was hypothesized that adolescents' life satisfaction and student engagement variables would show bidirectional relationships. To test this hypothesis, 779 students (53% female, 62% Caucasian) in a Southeastern US middle school completed a measure of global life satisfaction and measures of cognitive, emotional, and behavioral engagement at two time points, 5 months apart. A statistically significant bidirectional relationship between life satisfaction and cognitive engagement was found; however, non-significant relationships were found between life satisfaction and emotional and behavioral student engagement. The findings provide important evidence of the role of early adolescents' life satisfaction in their engagement in schooling during the important transition grades between elementary and high school. The findings also help extend the positive psychology perspective to the relatively neglected context of education.

The rules of engagement

DEFF Research Database (Denmark)

Davies, Sarah Rachael

2013-01-01

This article reflects on the “dialogic turn,” focusing on one analytical framework for understanding the wide range of processes that fall under the rubric of engagement. The notion of power-in-interaction is explored using a case study of informal dialogue, the Dana Centre, London. Using...... that imposed hierarchies are continually re-negotiated. In concluding I reflect on some implications of using power in the analysis of engagement....

Research staff and public engagement

DEFF Research Database (Denmark)

Davies, Sarah Rachael

2013-01-01

focuses on one staff group, contract researchers, to explore the perceived challenges and opportunities of public engagement. Qualitative and quantitative data-from a web-based survey and three focus groups-are used to show that, while engagement activities are often seen as rewarding, the challenges...

Work engagement: drivers and effects

NARCIS (Netherlands)

Bakhuys Roozeboom, M.M.C.; Schelvis, R.

2014-01-01

The concept of work engagement fits into the tradition of positive psychology, a recent paradigm shift in psychology which focuses on mental health rather than mental illness. This article gives an introduction to the concept of work engagement. Different definitions and viewpoints of the work

Work engagement in nursing practice: a relational ethics perspective.

Science.gov (United States)

Keyko, Kacey

2014-12-01

The concept of work engagement has existed in business and psychology literature for some time. There is a significant body of research that positively correlates work engagement with organizational outcomes. To date, the interest in the work engagement of nurses has primarily been related to these organizational outcomes. However, the value of work engagement in nursing practice is not only an issue of organizational interest, but of ethical interest. The dialogue on work engagement in nursing must expand to include the ethical importance of engagement. The relational nature of work engagement and the multiple levels of influence on nurses' work engagement make a relational ethics approach to work engagement in nursing appropriate and necessary. Within a relational ethics perspective, it is evident that work engagement enables nurses to have meaningful relationships in their work and subsequently deliver ethical care. In this article, I argue that work engagement is essential for ethical nursing practice. If engagement is essential for ethical nursing practice, the environmental and organizational factors that influence work engagement must be closely examined to pursue the creation of moral communities within healthcare environments. © The Author(s) 2014.

Investigation of Calibrating Force Transducer Using Sinusoidal Force

International Nuclear Information System (INIS)

Zhang Li; Wang Yu; Zhang Lizhe

2010-01-01

Sinusoidal force calibration method was studied several years before at Physikalisch-Technische Bundesanstalt (PTB). A similar dynamic force calibration system is developed at Changcheng Institute of Metrology and Measurement (CIMM). It uses electro-dynamic shakers to generate dynamic force in the range from 1 N to 20 kN, and heterodyne laser interferometers are used for acceleration measurement. The force transducer to be calibrated is mounted on the shaker, and a mass block is screwed on the top of force transducer, the sinusoidal forces realized by accelerated load masses are traceable to acceleration and mass according to the force definition. The methods of determining Spatial-dependent acceleration on mass block and measuring the end mass of force transducer in dynamic force calibration are discussed in this paper.

Les relations entre attentes, valeur, buts, engagement cognitif et engagement comportemental dans un MOOC

Directory of Open Access Journals (Sweden)

Bruno Poellhuber

2016-01-01

Full Text Available Dans le présent article, nous nous intéressons aux relations entre attentes, valeur, buts et engagement dans un MOOC universitaire de l’initiative Edulib. À partir d’une perspective théorique globale fondée sur l’autorégulation et en utilisant un modèle de motivation sociocognitif des attentes et de la valeur (Pintrich, 2003, nous analysons les liens entre motivation et engagement. Pour ce faire, nous utilisons les données de 531 répondants à un questionnaire distribué aux participants d’un MOOC de l’initiative Edulib (HEC Montréal portant sur l’introduction au marketing, offert à l’automne 2014. Une analyse par correspondances multiples sur les activités rapportées nous a permis de concevoir un score composite d’engagement comportemental. Par la suite, nous utilisons une approche d’équations structurelles pour tester le modèle théorique, après avoir opérationnalisé tous les liens anticipés entre les différentes variables. Nos résultats suggèrent un modèle acceptable qui confirme plusieurs des prévisions théoriques. Ainsi, la valeur est liée aussi bien aux buts extrinsèques qu’aux buts intrinsèques, mais les buts intrinsèques sont beaucoup plus fortement liés à l’engagement cognitif que les buts extrinsèques. Toutefois, aucune relation significative n’est observée entre l’engagement cognitif et l’engagement comportemental, ce qui soulève des questions de mesure, mais aussi des questions de nature théorique pour une clientèle d’adultes participant à un MOOC.

Why Japanese workers show low work engagement: An item response theory analysis of the Utrecht Work Engagement scale

Directory of Open Access Journals (Sweden)

Iwata Noboru

2010-11-01

Full Text Available Abstract With the globalization of occupational health psychology, more and more researchers are interested in applying employee well-being like work engagement (i.e., a positive, fulfilling, work-related state of mind that is characterized by vigor, dedication, and absorption to diverse populations. Accurate measurement contributes to our further understanding and to the generalizability of the concept of work engagement across different cultures. The present study investigated the measurement accuracy of the Japanese and the original Dutch versions of the Utrecht Work Engagement Scale (9-item version, UWES-9 and the comparability of this scale between both countries. Item Response Theory (IRT was applied to the data from Japan (N = 2,339 and the Netherlands (N = 13,406. Reliability of the scale was evaluated at various levels of the latent trait (i.e., work engagement based the test information function (TIF and the standard error of measurement (SEM. The Japanese version had difficulty in differentiating respondents with extremely low work engagement, whereas the original Dutch version had difficulty in differentiating respondents with high work engagement. The measurement accuracy of both versions was not similar. Suppression of positive affect among Japanese people and self-enhancement (the general sensitivity to positive self-relevant information among Dutch people may have caused decreased measurement accuracy. Hence, we should be cautious when interpreting low engagement scores among Japanese as well as high engagement scores among western employees.

Building work engagement: A systematic review and meta-analysis investigating the effectiveness of work engagement interventions.

Science.gov (United States)

Knight, Caroline; Patterson, Malcolm; Dawson, Jeremy

2017-07-01

Low work engagement may contribute towards decreased well-being and work performance. Evaluating, boosting and sustaining work engagement are therefore of interest to many organisations. However, the evidence on which to base interventions has not yet been synthesised. A systematic review with meta-analysis was conducted to assess the evidence for the effectiveness of work engagement interventions. A systematic literature search identified controlled workplace interventions employing a validated measure of work engagement. Most used the Utrecht Work Engagement Scale (UWES). Studies containing the relevant quantitative data underwent random-effects meta-analyses. Results were assessed for homogeneity, systematic sampling error, publication bias and quality. Twenty studies met the inclusion criteria and were categorised into four types of interventions: (i) personal resource building; (ii) job resource building; (iii) leadership training; and (iv) health promotion. The overall effect on work engagement was small, but positive, k  = 14, Hedges g  = 0.29, 95%-CI = 0.12-0.46. Moderator analyses revealed a significant result for intervention style, with a medium to large effect for group interventions. Heterogeneity between the studies was high, and the success of implementation varied. More studies are needed, and researchers are encouraged to collaborate closely with organisations to design interventions appropriate to individual contexts and settings, and include evaluations of intervention implementation. © 2016 The Authors. Journal of Organizational Behavior published by John Wiley & Sons, Ltd.

Public Engagement in Energy Research

NARCIS (Netherlands)

Jellema, Jako; Mulder, Henk A. J.

Public Engagement in Research is a key element in "Responsible Research and Innovation"; a cross-cutting issue in current European research funding. Public engagement can advance energy R&D, by delivering results that are more in-line with society's views and demands; and collaboration also unlocks

Engaging Students in Online Activities

DEFF Research Database (Denmark)

Egendal, Jeppe Michael

This study investegates how the educational design of online study activities affects students’ social and academic engagement in connection to their study? The study uses a hermenutical approach, using recordings of online sessions of student collaborations and interviews with students as methods...... for understanding student engagement...

Student Engagement through Digital Data

Science.gov (United States)

Gross, Liz; Meriwether, Jason L.

2016-01-01

This chapter suggests strategies and tools for student affairs professionals to leverage digital data to measure student engagement and learning outcomes, and refine programs that enhance institutional reputation and improve student persistence. The construct of student engagement is traced from its theoretical origins to recent research…

Student Engagement: Rhetoric and Reality

Science.gov (United States)

Baron, Paula; Corbin, Lillian

2012-01-01

Recently, there has been much interest in higher education literature and policy on the concepts of student engagement and disengagement. While most academic writings recognise the significance of student engagement, they have tended to concentrate on it in relation to academic activities. Increasingly, universities are "cascading" down…

Situating Engagement

DEFF Research Database (Denmark)

Korn, Matthias

Our mobile phone is with us at all times. Habitually, we pick it up in the morning and carry it around on our daily routes and routines. Increasingly, we use it to locate ourselves and the things and people around us. With ubiquitous computing, technology is moving into the very fabric of our....... First, situationally appropriate forms of engagement that align well with citizens’ own conceptions are necessary in order to provide relevance and meaning of issues in the moment. Second, situated engagement requires a technological setup which facilitates the co-location of people, place...... with sophisticated prototypes in the wild. It proposes walkshops as a technique for collaborative exploration within actual outdoor environments and the use of field trials as part of an iterative design process in order to look ahead toward use practices that are still in the making....

True or False Customer Engagement Behaviour

DEFF Research Database (Denmark)

Haurum, Helle; Beckmann, Suzanne C.

2014-01-01

Customers’ engagement behaviours are considered an important source of value to the company. So far, the discussion has mainly been conceptual and focused on the company’s perspective. By adopting the customer’s perspective we investigated how customers perceive their service relationship...... encounters with a company, using in-depth interviews. We found the following key factors driving and explaining customers’ engagement behaviours: (1) transactions matter and inconsistent engagement behaviours are a reality, (2) mundane products and services are still highly relevant for customers, and (3......) different degrees of customer experience alignment with services and products exist. Moreover, the distinction between true and false engagement behaviours we suggest indeed is relevant and we could establish their mediating capabilities....

Bilateral neuromuscular and force differences during a plyometric task.

Science.gov (United States)

Ball, Nick B; Scurr, Joanna C

2009-08-01

The purpose of this article is to compare the bilateral neuromuscular and force contribution during a plyometric bounce drop jump task and to assess the affects of nonsimultaneous foot placement. Sixteen male participants performed bounce drop jumps from a height of 0.4 m. Mean peak electromyography activity of the soleus, medial, and lateral gastrocnemius of both legs was recorded from each phase of the drop jump and normalized to a reference dynamic muscle action. Resultant ground reaction force, ground contact time, and duration of the drop jumps were recorded from each leg. Multivariate analysis of variance was used to compare bilateral electromyographic activity, resultant peak ground reaction force, and contact duration. Pearson's correlations (r) ascertained relationships between normalized electromyographic activity and contact time. Significant differences were shown between left and right triceps surae normalized electromyography during precontact and contact40ms (p 0.01). Significant differences were found between normalized soleus electromyography and both gastrocnemii for both legs during precontact (p 0.01). Weak relationships were found between normalized electromyographic activity and nonsimultaneous foot contact (r < 0.2). This study showed differences between left and right triceps surae in neuromuscular strategies engaged in the early stages of a drop jump task. Differences in contact time initiation were present; however, they are not significant enough to cause neuromuscular differences in the plantar flexor muscles.

Defense Acquisition Workforce: The Air Force Needs to Evaluate Changes in Funding for Civilians Engaged in Space Acquisition

Science.gov (United States)

2013-07-01

1) revitalize the acquisition workforce; (2) improve the requirements generation process; (3) instill budget and financial DOD Acquisition...with our four recommended actions (see app . I). In concurring with our recommendations, DOD stated that the Air Force will evaluate the pilot program

Modeling the formation of cell-matrix adhesions on a single 3D matrix fiber.

Science.gov (United States)

Escribano, J; Sánchez, M T; García-Aznar, J M

2015-11-07

Cell-matrix adhesions are crucial in different biological processes like tissue morphogenesis, cell motility, and extracellular matrix remodeling. These interactions that link cell cytoskeleton and matrix fibers are built through protein clutches, generally known as adhesion complexes. The adhesion formation process has been deeply studied in two-dimensional (2D) cases; however, the knowledge is limited for three-dimensional (3D) cases. In this work, we simulate different local extracellular matrix properties in order to unravel the fundamental mechanisms that regulate the formation of cell-matrix adhesions in 3D. We aim to study the mechanical interaction of these biological structures through a three dimensional discrete approach, reproducing the transmission pattern force between the cytoskeleton and a single extracellular matrix fiber. This numerical model provides a discrete analysis of the proteins involved including spatial distribution, interaction between them, and study of the different phenomena, such as protein clutches unbinding or protein unfolding. Copyright © 2015 Elsevier Ltd. All rights reserved.

How employee engagement matters for hospital performance.

Science.gov (United States)

Lowe, Graham

2012-01-01

Managers increasingly understand that employee engagement is a prerequisite for high performance. This article examines how job, work environment, management and organizational factors influence levels of engagement among healthcare employees. Original data come from the Ontario Hospital Association-NRC Picker Employee Experience Survey, involving over 10,000 employees in 16 Ontario hospitals. The article provides a clear definition and measure of engagement relevant to healthcare. In addition to identifying the main drivers of engagement, findings shows that a high level of employee engagement is related to retention, patient-centred care, patient safety culture and employees' positive assessments of the quality of care or services provided by their team. Implications of these findings for healthcare leaders are briefly considered.

Student Engagement in Inclusive Classrooms

Science.gov (United States)

Rangvid, Beatrice Schindler

2018-01-01

Using large scale survey data, I document substantial differences in behavioural engagement (defined as involvement in academic and social activities, cooperative participation in learning, and motivation and effort) and emotional engagement levels (defined as a sense of belonging and well-being at school) between students with and without special…

Developmental plasticity in reptiles: Insights into thermal and maternal effects on chameleon phenotypes.

Science.gov (United States)

Andrews, Robin M

2018-04-23

Embryonic environments affect a range of phenotypic traits including sex and reproductive success. I determined (1) how the interaction between incubation temperature and egg size affects sex allocation of Chamaeleo calyptratus and (2) how incubation temperature and maternal parent (clutch) affect water uptake by eggs and body size, growth, and climbing speed of hatchlings and juveniles. Eggs from five clutches were exposed to five temperature treatments with clutches replicated within and among treatments. Temperature affected sex, but only when egg size was included as a factor in analyses. At intermediate (28°C) temperatures, daughters were more likely to be produced from large eggs and sons more likely to be produced from small eggs, while at 25 and 30°C, the pattern of sex allocation was reversed. Temperature and clutch affected water uptake and body size. Nonetheless, the direction of temperature and clutch effects on water uptake by eggs and on the size of hatchlings were not the same and the direction of temperature effects on body sizes of hatchlings and juveniles differed as well. Clutch affected hatchling size but not juvenile size and growth rate. Clutch, but not incubation temperature, affected climbing speed, but the fastest hatchlings were not from the same clutches as the fastest juveniles. The independent effects of incubation temperature and clutch indicate that hatchling phenotypes are influenced largely by conditions experienced during incubation, while juvenile phenotypes are influenced largely by conditions experienced in the rearing environment. © 2018 Wiley Periodicals, Inc.

Medical engagement and organizational characteristics in general practice.

Science.gov (United States)

Ahnfeldt-Mollerup, Peder; dePont Christensen, René; Halling, Anders; Kristensen, Troels; Lykkegaard, Jesper; Nexøe, Jørgen; Barwell, Fred; Spurgeon, Peter; Søndergaard, Jens

2016-02-01

Medical engagement is a mutual concept of the active and positive contribution of doctors to maintaining and enhancing the performance of their health care organization, which itself recognizes this commitment in supporting and encouraging high quality care. A Medical Engagement Scale (MES) was developed by Applied Research Ltd (2008) on the basis of emerging evidence that medical engagement is critical for implementing radical improvements. To study the importance of medical engagement in general practice and to analyse patterns of association with individual and organizational characteristics. A cross-sectional study using a sampled survey questionnaire and the official register from the Danish General Practitioners' Organization comprising all registered Danish GPs. The Danish version of the MES Questionnaire was distributed and the survey results were analysed in conjunction with the GP register data. Statistically adjusted analyses revealed that the GPs' medical engagement varied substantially. GPs working in collaboration with colleagues were more engaged than GPs from single-handed practices, older GPs were less engaged than younger GPs and female GPs had higher medical engagement than their male colleagues. Furthermore, GPs participating in vocational training of junior doctors were more engaged than GPs not participating in vocational training. Medical engagement in general practice varies a great deal and this is determined by a complex interaction between both individual and organizational characteristics. Working in collaboration, having staff and being engaged in vocational training of junior doctors are all associated with enhanced levels of medical engagement among GPs. © The Author 2015. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Rules of engagement: predictors of Black Caribbean immigrants' engagement with African American culture.

Science.gov (United States)

Joseph, Nancy; Watson, Natalie N; Wang, Zhenni; Case, Andrew D; Hunter, Carla D

2013-10-01

The cultural context in the United States is racialized and influences Black Caribbean immigrants' acculturation processes, but what role it plays in Black Caribbean immigrants' acculturation into specific facets of American society (e.g., African American culture) has been understudied in the field of psychology. The present study extends research on Black Caribbean immigrants' acculturative process by assessing how this group's experience of the racial context (racial public regard, ethnic public regard, and cultural race-related stress) influences its engagement in African American culture (i.e., adoption of values and behavioral involvement). Data were collected from 93 Black participants of Caribbean descent, ranging in age from 13 to 45 and analyzed using a stepwise hierarchical regression. The findings highlighted that when Black Caribbean-descended participants perceived that the public held a favorable view of their racial group they were more likely to engage in African American culture. In contrast, when participants perceived that the public held a favorable view of their ethnic group (e.g., Haitian) they were less likely to engage in African American culture. Furthermore, among participants experiencing low levels of cultural race-related stress, the associations between racial public regard and engagement with African American culture were amplified. However, for participants experiencing high cultural race-related stress, their engagement in African American culture did not change as a function of racial public regard. These findings may suggest that, for Black Caribbean immigrants, the experience of the racial context influences strategies that serve to preserve or bolster their overall social status and psychological well-being in the United States. PsycINFO Database Record (c) 2013 APA, all rights reserved.

Building an engaged workforce at Cleveland Clinic

Directory of Open Access Journals (Sweden)

Patrnchak JM

2013-05-01

Full Text Available Joseph M PatrnchakCleveland Clinic, Cleveland, OH, USAAbstract: Employee engagement is widely recognized as a critical factor in organizational performance. This article examines an ongoing cultural development initiative at Cleveland Clinic designed to significantly increase employee engagement. Key components of this initiative include the introduction of serving leadership, new caregiver wellness and recognition programs, “Cleveland Clinic Experience” training focused on the institution’s core mission, and changes in the institutional vocabulary. Since 2008, the results include a dramatic improvement in engagement, as measured by the Gallup Q12 survey, with parallel improvements in patient satisfaction, as measured by the clinic's scores on the Hospital Consumer Assessment of Healthcare Providers and Systems (HCAHPS survey. In addition to a discussion of the key components of the clinic’s engagement initiative, the article provides a partial review of the literature focused on employee engagement as well as a summary of “lessons learned” that may serve as a guide for others facing the challenge of increasing employee engagement in large, mature health care institutions.Keywords: health care, employee engagement, culture change, hospital performance, patient satisfaction

Critically Engaging "Mutually Engaged Supervisory Processes": A Proposed Theory for CPE Supervisory Education.

Science.gov (United States)

Fitchett, George; Altenbaumer, Mary L; Atta, Osofo Kwesi; Stowman, Sheryl Lyndes; Vlach, Kyle

2014-12-01

Revisions to the processes for training and certifying supervisors continue to be debated within the Association for Clinical Pastoral Education (ACPE). In 2012 Ragsdale and colleagues published, "Mutually engaged supervisory processes," a qualitative research study utilizing grounded theory based on interviews with 19 recently certified Associate CPE Supervisors, of nine components that facilitate the development of CPE supervisory education students. In this article we critically engage this theory and the research upon which it is based. We also reflect on three issues highlighted by the theory: personal transformation in CPE supervisory education, how CPE supervisory education students develop theoretical foundations for their work, and engaging multicultural issues in supervisory education. We conclude that this theory offers ACPE the possibility of using research to guide future modifications to its practice of Supervisory education. © 2014 Journal of Pastoral Care Publications Inc.

Engaging students, shaping services: the changing face of student engagement at The Hive

Directory of Open Access Journals (Sweden)

Sarah Pittaway

2016-11-01

Full Text Available Library roles with a unique focus on student or customer engagement are relatively new in the sector and Worcester is one of the first universities to recruit to this area. Rather than focusing on the relationship between engagement and learning, this role seeks to engage with students as partners and agents for change who are actively involved in evaluating, developing and delivering our library service. This article outlines some of our initial successes and impacts, which are already changing the way we interact with our student population. It will also cover some of the challenges faced along the way, particularly in delivering service change in the context of the radical new service model of The Hive. 'Based on a breakout session presented at the 39th UKSG Annual Conference, Bournemouth, April 2016 '

Use of artificial substrates of different colors for oviposition by the brown stink bug Euschistus heros (Hemiptera, Pentatomidae

Directory of Open Access Journals (Sweden)

Diones Krinski

2013-09-01

Full Text Available Aiming to contribute to a rearing methodology for the brown stink bug, Euschistus heros, in the laboratory, we evaluated oviposition on artificial substrates of different colors. During six days, oviposition was evaluated daily, by counting the total number of eggs, number of clutches, and eggs/clutch. Females laid 12,463 eggs, in 1,677 clutches, resulting in an average of 7.28 ± 0.44 eggs/clutch. Black, brown, and green felt had the most eggs and clutches. The results demonstrated that many colors are suitable as oviposition substrate for E. heros, providing information for the mass rearing of this insect.

The affective shift model of work engagement.

Science.gov (United States)

Bledow, Ronald; Schmitt, Antje; Frese, Michael; Kühnel, Jana

2011-11-01

On the basis of self-regulation theories, the authors develop an affective shift model of work engagement according to which work engagement emerges from the dynamic interplay of positive and negative affect. The affective shift model posits that negative affect is positively related to work engagement if negative affect is followed by positive affect. The authors applied experience sampling methodology to test the model. Data on affective events, mood, and work engagement was collected twice a day over 9 working days among 55 software developers. In support of the affective shift model, negative mood and negative events experienced in the morning of a working day were positively related to work engagement in the afternoon if positive mood in the time interval between morning and afternoon was high. Individual differences in positive affectivity moderated within-person relationships. The authors discuss how work engagement can be fostered through affect regulation. (c) 2011 APA, all rights reserved.

Overseas Contingency Operations: Observations on the Use of Force Management Levels in Afghanistan, Iraq, and Syria

Science.gov (United States)

2016-12-01

made 18 recommendations in prior work cited in this statement. DOD has implemented 12 of them. Continued attention is needed to ensure that some...of logical steps to examine the mission; develop, analyze, and compare courses of action; select the best course of action; and produce a plan or...provide a complete picture of U.S. forces engaged in operations. Chairwoman Hartzler, Ranking Member Speier, and Members of the Subcommittee, this

Identifying Teaching Methods that Engage Entrepreneurship Students

Science.gov (United States)

Balan, Peter; Metcalfe, Mike

2012-01-01

Purpose: Entrepreneurship education particularly requires student engagement because of the complexity of the entrepreneurship process. The purpose of this paper is to describe how an established measure of engagement can be used to identify relevant teaching methods that could be used to engage any group of entrepreneurship students.…

Building work engagement: A systematic review and meta‐analysis investigating the effectiveness of work engagement interventions

Science.gov (United States)

Patterson, Malcolm; Dawson, Jeremy

2016-01-01

Summary Low work engagement may contribute towards decreased well‐being and work performance. Evaluating, boosting and sustaining work engagement are therefore of interest to many organisations. However, the evidence on which to base interventions has not yet been synthesised. A systematic review with meta‐analysis was conducted to assess the evidence for the effectiveness of work engagement interventions. A systematic literature search identified controlled workplace interventions employing a validated measure of work engagement. Most used the Utrecht Work Engagement Scale (UWES). Studies containing the relevant quantitative data underwent random‐effects meta‐analyses. Results were assessed for homogeneity, systematic sampling error, publication bias and quality. Twenty studies met the inclusion criteria and were categorised into four types of interventions: (i) personal resource building; (ii) job resource building; (iii) leadership training; and (iv) health promotion. The overall effect on work engagement was small, but positive, k = 14, Hedges g = 0.29, 95%‐CI = 0.12–0.46. Moderator analyses revealed a significant result for intervention style, with a medium to large effect for group interventions. Heterogeneity between the studies was high, and the success of implementation varied. More studies are needed, and researchers are encouraged to collaborate closely with organisations to design interventions appropriate to individual contexts and settings, and include evaluations of intervention implementation. © 2016 The Authors. Journal of Organizational Behavior published by John Wiley & Sons, Ltd. PMID:28781428

Work engagement in the public service context

DEFF Research Database (Denmark)

Noesgaard, Mette Strange; Hansen, Jesper Rosenberg

2016-01-01

Work engagement has increasingly captured the attention of researchers and practitioners due to its positive impact on employee level outcomes and overall organizational performance (e.g. Bakker and Bal, 2010, Hallberg and Schaufeli, 2006). Therefore, several studies have been conducted in variou...... investigates the role of public service motivation (PSM) in relation to engagement and how it may be used to enhance engagement in a challenging public context characterized by high levels of emotional labor, control and increasing demands for efficiency....... contexts although the vast majority focus on private organizations. Yet there are limitations in the understanding of work engagement in public sector context (Lavigna, 2011) and in particular knowledge of how PSM influence work engagement (Bakker, 2015). To address this gap, this qualitative study...

Measuring preschool learning engagement in the laboratory.

Science.gov (United States)

Halliday, Simone E; Calkins, Susan D; Leerkes, Esther M

2018-03-01

Learning engagement is a critical factor for academic achievement and successful school transitioning. However, current methods of assessing learning engagement in young children are limited to teacher report or classroom observation, which may limit the types of research questions one could assess about this construct. The current study investigated the validity of a novel assessment designed to measure behavioral learning engagement among young children in a standardized laboratory setting and examined how learning engagement in the laboratory relates to future classroom adjustment. Preschool-aged children (N = 278) participated in a learning-based Tangrams task and Story sequencing task and were observed based on seven behavioral indicators of engagement. Confirmatory factor analysis supported the construct validity for a behavioral engagement factor composed of six of the original behavioral indicators: attention to instructions, on-task behavior, enthusiasm/energy, persistence, monitoring progress/strategy use, and negative affect. Concurrent validity for this behavioral engagement factor was established through its associations with parent-reported mastery motivation and pre-academic skills in math and literacy measured in the laboratory, and predictive validity was demonstrated through its associations with teacher-reported classroom learning behaviors and performance in math and reading in kindergarten. These associations were found when behavioral engagement was observed during both the nonverbal task and the verbal story sequencing tasks and persisted even after controlling for child minority status, gender, and maternal education. Learning engagement in preschool appears to be successfully measurable in a laboratory setting. This finding has implications for future research on the mechanisms that support successful academic development. Copyright © 2017 Elsevier Inc. All rights reserved.

Work engagement and meaningful work across generational cohorts

Directory of Open Access Journals (Sweden)

Crystal Hoole

2015-08-01

Full Text Available Orientation: Engaging employees and providing employees with a sense of meaning at work is not a one-size-fits-all approach. Although research has shown that differences between work engagement and meaningful work amongst generational cohorts exist, results are still inconclusive. With age becoming increasingly more important as a diversity factor, a better understanding of the dynamics between work engagement and meaningful work across different generational cohorts is necessary to design the right strategy for each organisation’s unique parameters. Research purpose: The aim of this study was to determine whether there is a relationship between work engagement and meaningful work and whether there are significant variances between the levels of work engagement and meaningful work between different generational cohorts. Motivation for study: Work engagement has consistently been highlighted by researchers and human resources experts as a recommended solution to provide companies with the upper hand when it comes to creating a competitive edge. Yet, levels of work engagement are far from ideal, requiring intensified efforts to identify solutions towards raising overall engagement levels. In recent years, much of the focus in terms of generating engagement has been aimed in the direction of financial rewards and other benefits; some organisational experts are of the opinion that a shift is occurring towards meaningful work instead of monetary rewards as the driver of engagement. The changing nature of the work landscape also suggests that generational cohorts experience work engagement and meaningful work differently. Understanding these complexities is mandatory in creating solutions towards improving levels of engagement and meaningful work. Research approach, design and method: A cross-sectional quantitative research approach has been followed. The Utrecht Work Engagement Scale (UWES and Psychological Meaningful Scale (PMS were administered

Students Individual Engagement in GIS

Science.gov (United States)

Madsen, Lene Møller; Christiansen, Frederik; Rump, Camilla

2014-01-01

This paper develops two sets of concepts to theorize why students engage differently in Geographical Information Systems (GIS). These theoretical concepts are used as an analytical lens to explore empirical data on the experiences and engagement of students enrolled in an undergraduate GIS course in planning and management. The analysis shows that…

Collaborative Stakeholder Engagement. Special Report

Science.gov (United States)

Jordan, Matt; Chrislip, David; Workman, Emily

2016-01-01

Stakeholder engagement and collaboration are essential to the development of an effective state plan. Engaging a diverse group of stakeholders tasked with working together to create education policies that will have a positive, lasting impact on students is not as easy as it sounds. Experts in the field argue that the traditional stakeholder…

Adding Value: Online Student Engagement

Science.gov (United States)

Everett, Donna R.

2015-01-01

This paper seeks to add to the emerging literature related to online student engagement with additional suggestions for instructional strategies. Student engagement is one of the tenets of effective online instruction; as such, particular attention to how it adds value to student learning is crucial and worth the time and effort to enhance…

Disseminating effective clinician communication techniques: Engaging clinicians to want to learn how to engage patients.

Science.gov (United States)

Pollak, Kathryn I; Back, Anthony L; Tulsky, James A

2017-10-01

Patient-clinician communication that promotes patient engagement enhances health care quality. Yet, disseminating effective communication interventions to practicing clinicians remains challenging. Current methods do not have large and sustainable effects. In this paper, we argue that both top-down approaches (mandated by institutions) should be coupled with bottom-up approaches that address clinician motivation, confidence, and barriers. We need to engage clinicians in the same way we ask them to engage patients - strategically and with empathy. We discuss potentially innovative strategies to integrate top-down and bottom-up approaches in ways that fit clinicians' busy schedules and can inform policy. Copyright © 2017. Published by Elsevier B.V.

Condom Use Behaviors and Correlates of Condom Use in the Botswana Defence Force

Science.gov (United States)

2013-10-10

may engage in risky sexual behaviours, such as having unprotected sex with sex workers .4 Furthermore, studies have found high HIV risk- taking...did not use a condom the last time they had sex with a sex worker . 11 And in the 1Naval Health Research Center, Department of Defense HIV /AIDS...only found in 16-20% of participants,7 and 41% did not use a condom the last time they had sex with a sex worker .4 In the Rwanda Defence Forces, 24

Engaging Young Adolescents in School-Based Writing

Science.gov (United States)

Yost, Deborah S.; Liang, Ling L.; Vogel, Robert

2014-01-01

How might middle school teachers and schools more appropriately engage early adolescent students in the writing process so that they are motivated and engaged to "want" to write and write well? This article introduces "Writers Matter," an approach designed to engage and motivate young adolescents in the writing process,…

Emergency coronary angioplasty with stenting using Cordis® diagnostic coronary catheters when there is difficulty in engaging guide catheters and bench evaluation of diagnostic and guide catheters.

Science.gov (United States)

Arokiaraj, Mark Christopher

2018-02-01

Difficulty in engaging with guide catheters is not uncommon in acute emergencies. We aimed to evaluate the use of Cordis ® INFINITI diagnostic catheters to perform angioplasty in patients in whom the coronaries cannot be engaged using standard guide catheters. In 34 cases of acute coronary syndrome, when difficulty in engagement with two standard guide catheters was encountered with reasonable manipulations, angioplasty was performed using diagnostic catheters. In total, 40 stents were placed by this technique. Pushability and trackability, distal tip flexion and three-point bending tests were performed to evaluate the performance of the guide and diagnostic catheters. Angioplasty was performed easily in a setting where it would have been very difficult to perform. Coronary dissection occurred in one patient, treated by a stent. The stent and dilatation balloons were easily passed through the diagnostic catheters. Pressure tracings were clearly preserved with certain stent delivery systems, and at angioplasty, although there was slightly reduced opacification of the respective artery, the coronary anatomy was sufficiently visualized to perform angioplasty. No periprocedural target lesion complications were seen in any cases. Pushability and trackability tests showed good force transmission along a tortuous path with diagnostic catheters, and balanced force-displacement curves from three-point bending tests and distal tip softness tests. Angioplasty with stenting can be performed safely through 6F Cordis ® infiniti diagnostic catheters when difficulty in engaging guide catheters is encountered. Copyright © 2018 Sociedade Portuguesa de Cardiologia. Publicado por Elsevier España, S.L.U. All rights reserved.

World and regional labour force trends and prospects.

Science.gov (United States)

Ypsilantis, J N

1974-01-01

Changes in fertility during 1970-1985 will not have any effect on the composition of the world work force until 1985 because the people who will be of working age at that time have already been born. However, fertility for this period will directly influence the size of the age group 15-30 in the year 2000. Moreover, fertility trends for this period will have an indirect effect on participation of women in the labor force. The number of people in the labor force has proportionately followed total population. Just as total population is projected to increase in the single decade 1970-1980 by an amount equal to its size in 1750, so the labor force will increase by 360 million during the 1980's (its original size in 1750). By the end of the present century the world labor force may well number some 2,6000 million, reaching 3,000 million by the year 2010; 4,000 million by 2030; 5,000 million by 2070; and stabilizing at about 5,200 million by the end of the 21st century. There will be great regional variations. Increases will range from 20-35% in Europe and the U.S.S.R. to 100-120% in South Asia, Africa, and Latin America. For East Asia and North America the increases may amount to 60% by the year 2000 and 100% by 2050. In 1970 less developed regions had 2/3 the world's labor force; by 2000 they will have 3/4. In 1970 about 20% of the labor force in more developed regions were working in agriculture while in less developed regions 2/3 were so engaged. In other terms, in more developed regions 10 farmers supported 108 persons while in less developed regions 10 farmers supported only 38. According to Food and Agriculture Organization projections, by 2000 only 3.5% of the labor force in developed regions and 43.5% in less developed regions will be in agriculture. Differences in gross national product between regions is striking. In 1970 the less developed regions contained 70% of world population, 67% of the world labor force, 87% of the world agricultural labor, and

A dialectical perspective on burnout and engagement

Directory of Open Access Journals (Sweden)

Matthew R. Leon

2015-09-01

Full Text Available With strong empirical evidence existing for conflicting models, the nature of burnout and engagement continues to be debated. Scholars have recognized the need to theoretically clarify the nature of the burnout–engagement relationship in order to advance empirical research related to both topics. The purpose of this paper is to reconcile existing perspectives through an alternative approach that provides an alternate view of burnout and engagement based on dialectical theory. Implications for common theories used to study burnout and engagement are discussed, followed by suggestions and models for future research utilizing dialectics.

Who Engages with Moral Beauty?

Science.gov (United States)

Diessner, Rhett; Iyer, Ravi; Smith, Meghan M.; Haidt, Jonathan

2013-01-01

Aristotle considered moral beauty to be the "telos" of the human virtues. Displays of moral beauty have been shown to elicit the moral emotion of elevation and cause a desire to become a better person and to engage in prosocial behavior. Study 1 ("N" = 5380) shows engagement with moral beauty is related to several psychological…

Engaging luxury consumers in social media : Does active consumer engagement influence brand image?

OpenAIRE

Åvall, Martina

2017-01-01

This study aimed to investigate the effects of active consumer engagement within social media based brand communities on the brand image and luxury consumers’ desire to pur-chase luxury goods. The purpose of this study was to prove that by actively engaging con-sumers on social media luxury brands can positively influence the way consumers perceive the brand and through it increase consumers’ intention to purchase their products and services. Secondary research was carried out through col...

Engaging Patients in Their Care Versus Obscurantism.

Science.gov (United States)

Tzeng, Huey-Ming; Yin, Chang-Yi; Fitzgerald, Kara

2015-01-01

Could engaging patients in their care be a means to oppose obscurantism? Obscurantism is defined by Merriam-Webster as "the practice of keeping knowledge or understanding about something from people". This paper discusses the importance of promoting patient engagement and emphasizes that patients and healthcare providers are equally important stakeholders in health care. The discussion occurs in the context of hospital inpatient care as nurses play a critical role in patients' hospitalization experience, including engaging patients in their own care during hospital stays. Paternalism of healthcare providers is recognized as one of the main barriers to integrating the concepts of patient engagement and patient centeredness into every aspect of the care system. Promoting patient engagement is a two-way responsibility, and it requires the cooperation of both patients and healthcare providers. As scientists and healthcare providers, we have the duty to counter obscurantism by promoting understanding of the health of individual citizens and society at large. A culture change in healthcare systems toward being patient-centric and placing value on patient engagement is warranted, and this change must come from healthcare providers. Patient-centered tools that support patient engagement, patient portals, or personal health records are still needed. © 2014 Wiley Periodicals, Inc.

Engaging foster parents in treatment: a randomized trial of supplementing trauma-focused cognitive behavioral therapy with evidence-based engagement strategies.

Science.gov (United States)

Dorsey, Shannon; Pullmann, Michael D; Berliner, Lucy; Koschmann, Elizabeth; McKay, Mary; Deblinger, Esther

2014-09-01

The goal of this study was to examine the impact of supplementing Trauma-focused Cognitive Behavioral Therapy (TF-CBT; Cohen et al., 2006) with evidence-based engagement strategies on foster parent and foster youth engagement in treatment, given challenges engaging foster parents in treatment. A randomized controlled trial of TF-CBT standard delivery compared to TF-CBT plus evidence-based engagement strategies was conducted with 47 children and adolescents in foster care and one of their foster parents. Attendance, engagement, and clinical outcomes were assessed 1 month into treatment, end of treatment, and 3 months post-treatment. Youth and foster parents who received TF-CBT plus evidence-based engagement strategies were more likely to be retained in treatment through four sessions and were less likely to drop out of treatment prematurely. The engagement strategies did not appear to have an effect on the number of canceled or no-show sessions or on treatment satisfaction. Clinical outcomes did not differ by study condition, but exploratory analyses suggest that youth had significant improvements with treatment. Strategies that specifically target engagement may hold promise for increasing access to evidence-based treatments and for increasing likelihood of treatment completion. Copyright © 2014 Elsevier Ltd. All rights reserved.

Budgetary participation and performance: The mediating effects of medical managers' job engagement and self-efficacy.

Science.gov (United States)

Macinati, Manuela S; Bozzi, Stefano; Rizzo, Marco Giovanni

2016-09-01

Professional hybrids in healthcare have attracted a great deal of policy, managerial, and research interest. However, the current literature offers little guidance on (i) how hybrid roles can be supported by the hospital organization they work for as well as (ii) the cognitive and behavioral driving forces underpinning medical managers' managerial work that determine how they inhabit their roles and consequently meet the standards of performance that contribute to organizational effectiveness. Building on engagement theory and social cognitive theory and using data collected from clinical managers working in a large Italian public hospital, the current study focuses on the mediating role of psychological variables associated with the managerial role of medical managers, namely managerial job engagement and managerial self-efficacy, in the budgetary participation-job performance link. The results suggest that the information gained by participating in budgeting impact medical managers' thoughts and feelings about their managerial role and these, in turn, motivate different aspects of their performance. The findings are discussed in relation to theory and their managerial and policy implications. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Predation in Ground-Nesting Birds: an Experimental Study Using Natural Egg-Color Variation

Directory of Open Access Journals (Sweden)

Aurora M. Castilla

2007-06-01

Full Text Available We tested the hypothesis that cryptically colored eggs would suffer less predation than conspicuous eggs in the ground-nesting red-legged partridge, Alectoris rufa. We used A. rufa as a model species because it has a wide range of natural egg colors, the eggs are widely available from breeding farms, and nests are easily mimicked because they are scrapes containing no vegetation. The study was conducted in the spring of 2001 in forest and fallow fields of central Spain in Castilla La Mancha, Ciudad Real. We used 384 clutches of natural eggs that were white, white spotted, brown, or brown spotted. Within clutches, eggs were consistent in color and size; among clutches, color differences were distributed across habitats. Clutches were checked once after 2 wk of exposure. Cryptic coloration had a survival advantage that was dependent on the local suite of predators. Rodent predation was nonselective with respect to clutch color; however, avian predation was significantly higher for conspicuous clutches. In addition, there was an interaction of landscape and egg color for avian predation. In forest landscapes, the clutches with highest survival were brown spotted, whereas in fallow landscapes, brown and brown spotted clutches had higher survival than white and white potted clutches. Thus, both the predator suite and the landscape had significant effects on the value of cryptic egg coloration. Our study is relevant for conservationists and managers in charge of restocking programs in hunting areas. The release of other partridge species or their hybrids could result in hybridization with wild partridges, potentially leading to nonoptimal clutch pigmentation and reduced survival of the native species. We therefore recommend that local authorities, managers, and conservationists be cautious with the use of alien species and hybrids and release only autochthonous species of partridges within their natural ranges.

The Effects of Rewarding User Engagement

DEFF Research Database (Denmark)

Claussen, Jörg; Kretschmer, Tobias; Mayrhofer, Philip

2013-01-01

We study the market for apps on Facebook, the dominant social networking platform, and make use of a rule change by Facebook by which highly engaging apps were rewarded with further opportunities to engage users. The rule change led to new applications with significantly higher user ratings being...... declined less rapidly with age. Our results show that social media channels do not necessarily have to be managed through hard exclusion of participants but can also be steered through “softer” changes in reward and incentive systems.......We study the market for apps on Facebook, the dominant social networking platform, and make use of a rule change by Facebook by which highly engaging apps were rewarded with further opportunities to engage users. The rule change led to new applications with significantly higher user ratings being...

Childcare, eldercare, and labor force participation of married women in urban China: 1982 - 2000

OpenAIRE

Maurer-Fazio, Margaret; Connelly, Rachel; Lan, Chen; Tang, Lixin

2009-01-01

We employ data from the three most recent Chinese population censuses to consider married, urban women's labor force participation decisions in the context of their families and their residential locations. We are particularly interested in how the presence in the household of preschool and school-age children and/or the elderly and disabled affects women's likelihood of engaging in work outside the home. We find that the presence of older people in the household (any parent or parent-in-law ...

Common and conflicting interests in the engagements between conservation organizations and corporations.

Science.gov (United States)

Robinson, John G

2012-12-01

The conservation community increasingly views the corporate sector as a positive force for conservation. Collaborations between corporations and nongovernmental conservation organizations (NGOs) seek to mitigate the negative effects of corporate activities and augment positive conservation outcomes. I reviewed the establishment of corporate social responsibility (CSR) policies by corporations; the emerging focus on environmental practices and sustainability; and the history of engagement between corporations and nongovernmental organizations. I considered the ethical and reputation vulnerabilities of these collaborations, which depend especially on the financial nature of the relationship and reviewed how CSR approaches have influenced corporate practices. I concluded that whereas CSR practices can act to mitigate negative environmental impact, to date they have had limited positive effect on biodiversity conservation. ©2012 Society for Conservation Biology.

Immigrant-origin Youth Engagement in Education in Spain during the Great Recession

Directory of Open Access Journals (Sweden)

Maarten Keune

2017-01-01

Full Text Available This paper analyses the patterns of engagement in education of young people of immigrant origin resident in Spain, using data from the Spanish Labour Force Survey. The results show that the probability that immigrant-origin youth may be outside the educational system is higher than the probability for native youth, but only for those who came to Spain after the age of ten years old. In addition, their reaction to changes in the employment situation has been less intense. Also, parental educational resources slow down the reaction to changes in employment opportunities for the children of native people and daughters of immigrants, decreasing the inequality within each group in contexts of recession, but this is not the case for male young immigrants.

Turning attention to clinician engagement in Victoria.

Science.gov (United States)

Jorm, Christine; Hudson, Robyn; Wallace, Euan

2017-11-16

The engagement of clinicians with employing organisations and with the broader health system results in better safer care for patients. Concerns about the adequacy of clinician engagement in the state of Victoria led the Victorian Department of Health and Human Services to commission a scoping study. During this investigation more than 100 clinicians were spoken with and 1800 responded to surveys. The result was creation of a clear picture of what engagement and disengagement looked like at all levels - from the clinical microsystem to state health policy making. Multiple interventions are possible to enhance clinician engagement and thus the care of future patients. A framework was developed to guide future Victorian work with four elements: setting the agenda, informing, involving and empowering clinicians. Concepts of work or employee engagement that are used in other industries don't directly translate to healthcare and thus the definition of engagement chosen for use centred on involvement. This was designed to encourage system managers to ensure clinicians are full participants in design, planning and evaluation and in all decisions that affect them and their patients.

Residency Training: Work engagement during neurology training.

Science.gov (United States)

Zis, Panagiotis; Anagnostopoulos, Fotios; Artemiadis, Artemios K

2016-08-02

Work engagement, defined as a positive, fulfilling, work-related state of mind that is characterized by vigor, dedication, and absorption, can ameliorate patient care and reduce medical errors. The purpose of this cross-sectional study was to investigate work engagement among neurology residents in the region of Attica, Greece. In total, 113 residents participated in this study. Demographic and work-related characteristics, as well as emotional exhaustion and personality traits (neuroticism), were examined via an anonymous questionnaire. Work engagement was measured by the Utrecht Work Engagement Scale. The study sample had a mean age of 34.6 ± 3.6 years, ranging from 26 to 45 years. Sixty-two (54.9%) participants were women and 45 (39.8%) were married. After adjusting for sex, emotional exhaustion, and neuroticism, the main factors associated with work engagement were autonomy and chances for professional development. Providing more chances for trainees' professional development as well as allowing for and supporting greater job autonomy may improve work engagement during neurology training. © 2016 American Academy of Neurology.

Engaging Foster Parents in Treatment: A Randomized Trial of Supplementing Trauma-focused Cognitive Behavioral Therapy with Evidence-based Engagement Strategies

OpenAIRE

Dorsey, Shannon; Pullmann, Michael D.; Berliner, Lucy; Koschmann, Elizabeth; McKay, Mary; Deblinger, Esther

2014-01-01

The goal of this study was to examine the impact of supplementing Trauma-focused Cognitive Behavioral Therapy (TF-CBT; Cohen, Mannarino, & Deblinger, 2006) with evidence-based engagement strategies on foster parent and foster youth engagement in treatment, given challenges engaging foster parents in treatment. A randomized controlled trial of TF-CBT standard delivery compared to TF-CBT plus evidence-based engagement strategies was conducted with 47 children and adolescents in foster care and ...

Prime waterfront real estate: Apple snails choose wild taro for oviposition sites

Directory of Open Access Journals (Sweden)

Colin H. KYLE, Alexis W. KROPF, Romi L. BURKS

2011-10-01

Full Text Available While difficult to prevent introductions, scientific research can help guide control efforts of exotic, invasive species. South American island apple snails Pomacea insularum have quickly spread across the United States Gulf Coast and few control measures exist to delay their spread. Usually occupying cryptic benthic habitats, female apple snails crawl out of the water to deposit large, bright pink egg clutches on emergent objects. To help identify the most likely place to find and remove clutches, we conducted four lab experiments to investigate what specific object qualities (i.e. material; shape and height; plant species; natural and artificial attracted P. insularum females to lay clutches. In our fourth experiment, we specifically examined the relationship between female size and reproductive output. To further understand reproductive output, we quantified experimental clutch chara- cteristics (height above water, dimensions, mass, approximate volume, number of eggs, hatching efficiency. Pomacea insularum females laid more clutches on plant material, chose round over flat surfaces and failed to differentiate between tall and short structures. In comparison to a common native plant in the eastern US, Pontederia cordata, snails clearly preferred to lay clutches on a widely distributed exotic, invasive plant (wild taro, Colocasia esculenta. Unexpectedly, smaller snails showed higher overall total fecundity as well as more eggs per clutch than larger snails. Therefore, hand removal efforts of large females may not be enough to slow down clutch production. Collectively, our results indicate that conservationists and managers should search emergent plants for P. insularum clutches carefully to guard against established populations [Current Zoology 57 (5: 630–641, 2011].

Volitional Trust, Autonomy Satisfaction, and Engagement at Work.

Science.gov (United States)

Heyns, Marita; Rothmann, Sebastiaan

2018-02-01

This study tested a structural model that identifies the nature of relationships between trust, autonomy satisfaction, and personal engagement at work. A cross-sectional survey design with a convenience sample ( n = 252) was used. The Behavioral Trust Inventory, Work-Related Basic Need Satisfaction Scale, and Work Engagement Scale were administered. While reliance-based trust did not have a significant influence on engagement, disclosure-based trust in a focal leader was found to predict satisfaction of autonomy needs and employee engagement. Mediation analyses revealed that satisfaction of the need for autonomy facilitates the influence of trust on work outcomes. More specifically, disclosure (a dimension of trust) impacted engagement via autonomy satisfaction. Overall, the model explained 44% of total variance in engagement, to which the variables proportionately contributed as follows: autonomy satisfaction = 79.58%, disclosure = 18.22%, and reliance = 2.20%. The findings provide possible directions for how leaders can leverage trust to facilitate autonomy support and higher levels of engagement.

Subatomic forces

International Nuclear Information System (INIS)

Sutton, C.

1989-01-01

Inside the atom, particles interact through two forces which are never felt in the everyday world. But they may hold the key to the Universe. These ideas on subatomic forces are discussed with respect to the strong force, the electromagnetic force and the electroweak force. (author)

Measuring engagement at work: validation of the Chinese version of the Utrecht Work Engagement Scale.

Science.gov (United States)

Fong, Ted Chun-tat; Ng, Siu-man

2012-09-01

Work engagement is a positive work-related state of fulfillment characterized by vigor, dedication, and absorption. Previous studies have operationalized the construct through development of the Utrecht Work Engagement Scale. Apart from the original three-factor 17-item version of the instrument (UWES-17), there exists a nine-item shortened revised version (UWES-9). The current study explored the psychometric properties of the Chinese version of the Utrecht Work Engagement Scale in terms of factorial validity, scale reliability, descriptive statistics, and construct validity. A cross-sectional questionnaire survey was conducted in 2009 among 992 workers from over 30 elderly service units in Hong Kong. Confirmatory factor analyses revealed a better fit for the three-factor model of the UWES-9 than the UWES-17 and the one-factor model of the UWES-9. The three factors showed acceptable internal consistency and strong correlations with factors in the original versions. Engagement was negatively associated with perceived stress and burnout while positively with age and holistic care climate. The UWES-9 demonstrates adequate psychometric properties, supporting its use in future research in the Chinese context.

Work Engagement in Serbia: Psychometric Properties of the Serbian Version of the Utrecht Work Engagement Scale (UWES)

OpenAIRE

Petrović, Ivana B.; Vukelić, Milica; Čizmić, Svetlana

2017-01-01

Work engagement is defined as a positive, affective-motivational state of work-related well-being characterized by vigor, dedication and absorption. The Utrecht Work Engagement Scale (UWES) is the most frequently used measure of work engagement. The aim of this study was to analyze the psychometric properties of the Serbian versions of the UWES-17 and UWES-9. The sample consisted of 860 employees from a number of organizations and jobs across Serbia. Based on the UWES-17 findings, the data co...

Policy and Practice: The Role of Trade Unions in Reducing Migrant Workers’ Vulnerability to Forced Labour and Human Trafficking in the Greater Mekong Subregion

OpenAIRE

Eliza Marks; Anna Olsen

2015-01-01

This paper provides an analysis of what trade unions can offer to reduce the vulnerability of migrant workers to forced labour and human trafficking in the Greater Mekong Subregion (GMS) and Malaysia as a key destination for GMS migrant workers. The exploration of the potential for the engagement of trade union partners is a timely contribution to the forced labour and anti-trafficking debate, given the shift towards a more holistic labour rights approach, and the ensuing search for more acto...

Identification of cutting force coefficients in machining process considering cutter vibration

Science.gov (United States)

Yao, Qi; Luo, Ming; Zhang, Dinghua; Wu, Baohai

2018-03-01

Among current cutting force models, cutting force coefficients still are the foundation of predicting calculation combined with consideration of geometry engagement variation, equipment characteristics, material properties and so on. Attached with unimpeachable significance, the traditional and some novel identification methods of cutting force coefficient are still faced with trouble, including repeated onerous work, over ideal measuring condition, variation of value due to material divergence, interference from measuring units. To utilize the large amount of data from real manufacturing section, enlarge data sources and enrich cutting data base for former prediction task, a novel identification method is proposed by considering stiffness properties of the cutter-holder-spindle system in this paper. According to previously proposed studies, the direct result of cutter vibration is the form of dynamic undeformed chip thickness. This fluctuation is considered in two stages of this investigation. Firstly, a cutting force model combined with cutter vibration is established in detailed way. Then, on the foundation of modeling, a novel identification method is developed, in which the dynamic undeformed chip thickness could be obtained by using collected data. In a carefully designed experiment procedure, the reliability of model is validated by comparing predicted and measured results. Under different cutting condition and cutter stiffness, data is collected for the justification of identification method. The results showed divergence in calculated coefficients is acceptable confirming the possibility of accomplishing targets by applying this new method. In discussion, the potential directions of improvement are proposed.

Public Engagement on Climate Change

Science.gov (United States)

Curry, J.

2011-12-01

Climate change communication is complicated by complexity of the scientific problem, multiple perspectives on the magnitude of the risk from climate change, often acrimonious disputes between scientists, high stakes policy options, and overall politicization of the issue. Efforts to increase science literacy as a route towards persuasion around the need for a policy like cap and trade have failed, because the difficulty that a scientist has in attempting to make sense of the social and political complexity is very similar to the complexity facing the general public as they try to make sense of climate science itself. In this talk I argue for a shift from scientists and their institutions as information disseminators to that of public engagement and enablers of public participation. The goal of engagement is not just to inform, but to enable, motivate and educate the public regarding the technical, political, and social dimensions of climate change. Engagement is a two-way process where experts and decision-makers seek input and learn from the public about preferences, needs, insights, and ideas relative to climate change impacts, vulnerabilities, solutions and policy options. Effective public engagement requires that scientists detach themselves from trying to control what the public does with the acquired knowledge and motivation. The goal should not be to "sell" the public on particular climate change solutions, since such advocacy threatens public trust in scientists and their institutions. Conduits for public engagement include the civic engagement approach in the context of community meetings, and perhaps more significantly, the blogosphere. Since 2006, I have been an active participant in the climate blogosphere, focused on engaging with people that are skeptical of AGW. A year ago, I started my own blog Climate Etc. at judithcurry.com. The demographic that I have focused my communication/engagement activities are the technically educated and scientifically

Engaged patients, engaged partnerships: singles and partners dealing with an acute cardiac event.

Science.gov (United States)

Bertoni, Anna; Donato, Silvia; Graffigna, Guendalina; Barello, Serena; Parise, Miriam

2015-01-01

A few studies examine patients' (and partners') individual and relational functioning after an acute cardiac event and no research focuses on the individual and relational factors associated with the patient's engagement in his/her disease management. The present study aimed at exploring these variables in male and female patients as well as their partners. We pursued our objectives by taking advantage of a dyadic research design that involved both partners in the data collection, when present, and by including women patients in the sample. Findings showed that patients in a couple, compared to single patients, perceive that their illness had less serious consequences for their life and they were more engaged in their health care; that patients and partners showed comparable levels of distress; and that less depressed, more confident, and better informed patients were more likely to actively engage in their treatment. Findings are discussed in light of their implications for clinical practice.

Nurse manager engagement: a concept analysis.

Science.gov (United States)

Gray, Linda R

2012-01-01

This concept analysis examines the visibility of nurse manager engagement in the healthcare work environment. The term employee engagement was derived from studies of morale or the willingness of a group to accomplish objectives in the 1920s. "Following World War II group morale scores were used as predictors of speed, quality, and militancy by US Army researchers. The goal was to identify star, or high performers. A term was needed to describe emotional attachment of an individual to the organization, fellow associates, and the job" ("Employee engagement origins," 2010, p. 1). The CINAHL, MEDLINE, ABI INFORM, PsycINFO, and Ovid databases and the Internet were searched for the period of 2005-2010 for literature published in English with a focus on peer-reviewed journals from disciplines of health sciences, health administration, business, and psychology. The Walker and Avant method was used for this analysis. The experience of the author as a current and previous nurse manager was also used for this analysis. Nurse manager engagement was assumed to be present based indirectly on empirical referents and consequences, such as low or high vacancy rates for staff nurses. Further research is needed to explore the identity of the nurse serving in the role of manager/leader who is able to demonstrate the skills and talents necessary to visibly demonstrate engagement and facilitate a culture of engaged nurse managers. © 2012 Wiley Periodicals, Inc.

KAITAN ANTARA KEBAHAGIAAN PEKERJA DAN EMPLOYEE ENGAGEMENT STUDI EMPIRIKAL

Directory of Open Access Journals (Sweden)

Thomas Subarso Isriadi

2017-08-01

Full Text Available Penelitian ini bertujuan untuk menyelidiki hubungan antara employee happiness dengan employee engagement. Hasil penelitian akan digunakan sebagai dasar melakukan intervensi. Intervensi akan dilakukan terhadap variabel happiness dan kemudian mengukur pengaruh terhadap employee engagement. Subyek penelitian adalah pekerja diperusahaan perkebunan sebanyak 98 orang. Penelitian ini menggunakan instrumen skala engagement dan skala happiness.Penelitian membuktikan bahwa terdapat hubungan yang signifikan antara kebahagiaan dengan employee engagement. Intervensi dilakukan dalam dua angkatan dengan peserta masing-masing angkatan sebanyak 18 orang. Untuk mengukur efektivitas intervensi, peneliti menggunakan t-test untuk mengukur perbedaan dari pretest dan posttest baik untuk kebahagiaan maupun employee engagement. Hasil dari analisis t-test menunjukkan perbedaan yang signifikan terhadap employee engagement setelah intervensi. Intervensi telah meningkatkan employee engagement.

Quadriceps force and anterior tibial force occur obviously later than vertical ground reaction force: a simulation study

OpenAIRE

Ueno, Ryo; Ishida, Tomoya; Yamanaka, Masanori; Taniguchi, Shohei; Ikuta, Ryohei; Samukawa, Mina; Saito, Hiroshi; Tohyama, Harukazu

2017-01-01

Background: Although it is well known that quadriceps force generates anterior tibial force, it has been unclear whether quadriceps force causes great anterior tibial force during the early phase of a landing task. The purpose of the present study was to examine whether the quadriceps force induced great anterior tibial force during the early phase of a landing task. Methods: Fourteen young, healthy, female subjects performed a single-leg landing task. Muscle force and anterior tibial force w...

Can sexual selection drive female life histories? A comparative study on Galliform birds

OpenAIRE

Kolm, N.; Stein, R. W.; Mooers, A. O.; Verspoor, J. J.; Cunningham, E. J. A.

2007-01-01

Sexual selection has been identified as a major evolutionary force shaping male life history traits but its impact on female life history evolution is less clear. Here we examine the impact of sexual selection on three key female traits (body size, egg size and clutch size) in Galliform birds. Using comparative independent contrast analyses and directional DISCRETE analyses, based on published data and a new genera-level supertree phylogeny of Galliform birds, we investigated how sexual selec...

A cross-case comparative analysis of international security forces' impacts on health systems in conflict-affected and fragile states.

Science.gov (United States)

Bourdeaux, Margaret; Kerry, Vanessa; Haggenmiller, Christian; Nickel, Karlheinz

2015-01-01

Destruction of health systems in fragile and conflict-affected states increases civilian mortality. Despite the size, scope, scale and political influence of international security forces intervening in fragile states, little attention has been paid to array of ways they may impact health systems beyond their effects on short-term humanitarian health aid delivery. Using case studies we published on international security forces' impacts on health systems in Haiti, Kosovo, Afghanistan and Libya, we conducted a comparative analysis that examined three questions: What aspects, or building blocks, of health systems did security forces impact across the cases and what was the nature of these impacts? What forums or mechanisms did international security forces use to interact with health system actors? What policies facilitated or hindered security forces from supporting health systems? We found international security forces impacted health system governance, information systems and indigenous health delivery organizations. Positive impacts included bolstering the authority, transparency and capability of health system leadership. Negative impacts included undermining the impartial nature of indigenous health institutions by using health projects to achieve security objectives. Interactions between security and health actors were primarily ad hoc, often to the detriment of health system support efforts. When international security forces were engaged in health system support activities, the most helpful communication and consultative mechanisms to manage their involvement were ones that could address a wide array of problems, were nimble enough to accommodate rapidly changing circumstances, leveraged the power of personal relationships, and were able to address the tensions that arose between security and health system supporting strategies. Policy barriers to international security organizations participating in health system support included lack of mandate, conflicts

Seasonal variation in the incidence of double broods: The date hypothesis fits better than the quality hypothesis

NARCIS (Netherlands)

Verboven, N.; Verhulst, S.

1996-01-01

1. In three great tit (Parus major) populations the probability that a pair starts a second clutch, a clutch produced after a successful first brood, varied between years and areas but generally declined through the breeding season. 2. By exchanging first clutches between early and late breeding

Seasonal variation in the incidence of double broods : The date hypothesis fits better than the quality hypothesis

NARCIS (Netherlands)

Verboven, N; Verhulst, S

1. In three great tit (Parus major) populations the probability that a pair starts a second clutch, a clutch produced after a successful first brood, varied between years and areas but generally declined through the breeding season. 2. By exchanging first clutches between early and late breeding

Sensitivity of adult and embryonic calanoid copepods to acute ionizing radiation

International Nuclear Information System (INIS)

Gehrs, C.W.; Trabalka, J.R.; Bardill, E.A.

1975-01-01

Effects of 60 Co γ-rays on adult and embryonic calanoid copepods (Diaptomus clavipes Schact) were determined following acute doses of 0, 1, 10, and 100 krads. Mean survivorship of adults ranged from 3.1 to 45.2 days (100 krad and controls, respectively) and decreased significantly at each increase in dose. The 100-krad dose effected 100 percent mortality to all embryos. Whereas all clutches in the controls had some hatching success, a progressive increase in percentage of clutches in which no hatching took place was seen over the dose range used. Nearly twice as many clutches were dropped in the irradiated group as in the controls. While a significant decrease in hatching success with increasing dose was observed when all clutches were compared, this was not the case at the lowest dose for carried clutches. Possibly the females are able to assess the physiological state of the embryos carried and eject clutches containing damaged eggs. (U.S.)

Avian paternal care had dinosaur origin.

Science.gov (United States)

Varricchio, David J; Moore, Jason R; Erickson, Gregory M; Norell, Mark A; Jackson, Frankie D; Borkowski, John J

2008-12-19

The repeated discovery of adult dinosaurs in close association with egg clutches leads to speculation over the type and extent of care exhibited by these extinct animals for their eggs and young. To assess parental care in Cretaceous troodontid and oviraptorid dinosaurs, we examined clutch volume and the bone histology of brooding adults. In comparison to four archosaur care regressions, the relatively large clutch volumes of Troodon, Oviraptor, and Citipati scale most closely with a bird-paternal care model. Clutch-associated adults lack the maternal and reproductively associated histologic features common to extant archosaurs. Large clutch volumes and a suite of reproductive features shared only with birds favor paternal care, possibly within a polygamous mating system. Paternal care in both troodontids and oviraptorids indicates that this care system evolved before the emergence of birds and represents birds' ancestral condition. In extant birds and over most adult sizes, paternal and biparental care correspond to the largest and smallest relative clutch volumes, respectively.

Meaning creation and employee engagement in home health caregivers.

Science.gov (United States)

Nielsen, Mette Strange; Jørgensen, Frances

2016-03-01

The purpose of this study is to contribute to an understanding on how home health caregivers experience engagement in their work, and specifically, how aspects of home healthcare work create meaning associated with employee engagement. Although much research on engagement has been conducted, little has addressed how individual differences such as worker orientation influence engagement, or how engagement is experienced within a caregiving context. The study is based on a qualitative study in two home homecare organisations in Denmark using a think-aloud data technique, interviews and observations. The analysis suggests caregivers experience meaning in three relatively distinct ways, depending on their work orientation. Specifically, the nature of engagement varies across caregivers oriented towards being 'nurturers', 'professionals', or 'workers', and the sources of engagement differ for each of these types of caregivers. The article contributes by (i) advancing our theoretical understanding of employee engagement by emphasising meaning creation and (ii) identifying factors that influence meaning creation and engagement of home health caregivers, which should consequently affect the quality of services provided home healthcare patients. © 2015 Nordic College of Caring Science.

Antecedents and consequences of work engagement among nurses.

Science.gov (United States)

Sohrabizadeh, Sanaz; Sayfouri, Nasrin

2014-11-01

Engaged nurses have high levels of energy and are enthusiastic about their work which impacts quality of health care services. However, in the context of Iran, due to observed burnout, work engagement among nurses necessitates immediate exploration. This investigation aimed to identify a suitable work engagement model in nursing profession in hospitals according to the hypothesized model and to determine antecedents and consequences related to work engagement among nurses. In this cross-sectional study, a questionnaire was given to 279 randomly-selected nurses working in two general teaching hospitals of Shiraz University of Medical Sciences (Shiraz, Iran) to measure antecedents and consequences of work engagement using the Saks's (2005) model. Structural Equation Modeling was used to examine the model fitness. Two paths were added using LISREL software. The resulting model showed good fitness indices (χ(2) = 23.62, AGFI = 0.93, CFI = 0.97, RMSEA = 0.07) and all the coefficients of the paths were significant (t ≥ 2, t ≤ -2). A significant correlation was found between work engagement and model variables. Paying adequate attention to the antecedents of work engagement can enhance the quality of performance among nurses. Additionally, rewards, organizational and supervisory supports, and job characteristics should be taken into consideration to establish work engagement among nurses. Further researches are required to identify other probable antecedents and consequences of nursing work engagement, which might be related to specific cultural settings.

The measurement of employee engagement in government institutions

Directory of Open Access Journals (Sweden)

Martins, N.

2016-07-01

Full Text Available Employee engagement has consistently been rated as one of the top issues on chief executive officers’ lists of priorities and is a main focus of attention of both academics and human resources practitioners. A number of studies focus on employee engagement in the private sector, however there are relatively fewer studies that focus on employee engagement in government institutions. The aim of this study was twofold: Firstly, the validity and reliability of the employee engagement instrument for government institutions were determined. Secondly, it was determined if any significant differences could be detected between the employee engagement levels of the various biographical groups that participated in the survey. A quantitative research study was conducted using a database of a research company. The database in question is made up of 285 000 business people from various industries and sizes of business and who occupy different roles, reflecting the profile of the South African working population. A total of 4 099 employees, of which 427 represented government institutions, completed the employee engagement questionnaire. The results confirmed the validity and reliability of the questionnaire for government institutions, but with a slightly different structure. Some biographical groupings indicated that they experience employee engagement in a significantly different way. The results indicate that the younger employees together with top and senior management experience the highest levels of engagement in government institutions. The significance of these results is that not all biographical groups’ engagement levels can be managed equally

Can persons with dementia be engaged with stimuli?

Science.gov (United States)

Cohen-Mansfield, Jiska; Marx, Marcia S; Dakheel-Ali, Maha; Regier, Natalie G; Thein, Khin

2010-04-01

To determine which stimuli are 1) most engaging 2) most often refused by nursing home residents with dementia, and 3) most appropriate for persons who are more difficult to engage with stimuli. Participants were 193 residents of seven Maryland nursing homes. All participants had a diagnosis of dementia. Stimulus engagement was assessed by the Observational Measure of Engagement. The most engaging stimuli were one-on-one socializing with a research assistant, a real baby, personalized stimuli based on the person's self-identity, a lifelike doll, a respite video, and envelopes to stamp. Refusal of stimuli was higher among those with higher levels of cognitive function and related to the stimulus' social appropriateness. Women showed more attention and had more positive attitudes for live social stimuli, simulated social stimuli, and artistic tasks than did men. Persons with comparatively higher levels of cognitive functioning were more likely to be engaged in manipulative and work tasks, whereas those with low levels of cognitive functioning spent relatively more time responding to social stimuli. The most effective stimuli did not differ for those most likely to be engaged and those least likely to be engaged. Nursing homes should consider both having engagement stimuli readily available to residents with dementia, and implementing a socialization schedule so that residents receive one-on-one interaction. Understanding the relationship among type of stimulus, cognitive function, and acceptance, attention, and attitude toward the stimuli can enable caregivers to maximize the desired benefit for persons with dementia.

Improving Student Engagement in Veterinary Business Studies.

Science.gov (United States)

Armitage-Chan, Elizabeth; Jackson, Elizabeth

2018-01-01

Improving Student Engagement in Veterinary Business StudiesIn a densely packed veterinary curriculum, students may find it particularly challenging to engage in the less overtly clinical subjects, yet pressure from industry and an increasingly competitive employment market necessitate improved veterinary student education in business and management skills. We describe a curriculum intervention (formative reflective assignment) that optimizes workplace learning opportunities and aims to provide better student scaffolding for their in-context business learning. Students were asked to analyze a business practice they experienced during a period of extra-mural studies (external work placement). Following return to the college, they were then instructed to discuss their findings in their study group, and produce a group reflection on their learning. To better understand student engagement in this area, we analyzed individual and group components of the assignment. Thematic analysis revealed evidence of various depths of student engagement, and provided indications of the behaviors they used when engaging at different levels. Interactive and social practices (discussing business strategies with veterinary employees and student peers) appeared to facilitate student engagement, assist the perception of relevance of these skills, and encourage integration with other curriculum elements such as communication skills and clinical problem solving.

Perceived Calling and Work Engagement Among Nurses.

Science.gov (United States)

Ziedelis, Arunas

2018-03-01

The purpose of this study was to explore the relationship of perceived calling and work engagement in nursing over and above major work environment factors. In all, 351 nurses from various health care institutions completed the survey. Data were collected about the most demanding aspects of nursing, major job resources, the degree to which nursing is perceived as a meaningful calling, work engagement, and main demographic information. Hierarchical linear regression was applied to assess the relation between perceived calling and work engagement, while controlling for demographic and work environment factors, and perceived calling was significantly related to two out of three components of nurses' work engagement. The highest association was found with dedication component, and vigor component was related insignificantly. Results have shown that perceived calling might motivate nurses to engage in their work even in burdensome environment, although possible implications for the occupational well-being of nurses themselves remains unclear.

Practical Insights for the Pharmacist Educator on Student Engagement

Science.gov (United States)

Romanelli, Frank; Piascik, Peggy; Cain, Jeff

2016-01-01

Student engagement continues to be a point of emphasis in pharmacy education, yet there remains little data on tangible means to increase organic student engagement. This review attempts to better define student engagement, draws from educational theorists to emphasize the importance of student engagement, and provides the reader with practice philosophies that can be used across of variety of teaching settings to help develop an engaging learning environment. PMID:27899839

Reasons for Engagement: SME Owner-manager Motivations for Engaging in a Workplace Mental Health and Wellbeing Intervention.

Science.gov (United States)

Dawkins, Sarah; Martin, Angela; Kilpatrick, Michelle; Scott, Jenn

2018-05-30

Small-to-medium enterprises (SMEs) require specialized attention regarding workplace mental health (WMH), but can be challenging to engage in WMH promotion interventions. This cross-sectional study analyzed self-reported motivations of SME owner/managers who engaged in a WMH promotion intervention specifically designed for SMEs. Data from 297 SME owner/managers was thematically coded prior to conducting multinominal logistical regression analyses to determine reasons for engagement based on a series of predictors, including owner/manager psychological distress, recent experience of a stressful work event, and business confidence. Owner/manager psychological distress, experience of a recent stressful workplace, and low 12-month business confidence incident were important predictors of engagement. The findings provide important insights into the uptake of a WMH promotion intervention, which can inform the design and future recruitment strategies for WMH promotion interventions within the SME sector.

Engagement, resilience and empathy in nursing assistants.

Science.gov (United States)

Navarro-Abal, Yolanda; López-López, M José; Climent-Rodríguez, José A

To analyse the levels of engagement, resilience and empathy, and the relationship between them, in a sample of nursing assistants working in different private institutions in Huelva. A transversal, descriptive study. The sample comprised 128 nursing assistants working in private health centres of Huelva. They were given the following instruments: resilience scale Wagnild and Young, Interpersonal Reactivity Index and Utrech Work Engagement Scale. There is a relationship between the cognitive and emotional components of engagement and empathy. Certain sociodemographic variables associated with the organisation of work and working conditions are associated with level of engagement. Copyright © 2017 Elsevier España, S.L.U. All rights reserved.

Engagement states and learning from educational games.

Science.gov (United States)

Deater-Deckard, Kirby; Chang, Mido; Evans, Michael E

2013-01-01

Children's and adolescents' cognitive, affective, and behavioral states of engagement enhance or impede enjoyment of, and performance with, educational games. We propose a comprehensive model of engagement states and apply it to research on educational game development and research on the role of various aspects of engagement on game play and learning. Emphasis is placed on individual differences in attention, memory, motor speed and control, persistence, and positive and negative affect (approach/avoidance), and how these pertain to social cognitions regarding mathematics achievement. Our challenge is to develop educational games that are effective for a wide variety of student engagement states. Copyright © 2013 Wiley Periodicals, Inc., A Wiley Company.

Engagement with physics across diverse festival audiences

Science.gov (United States)

Roche, Joseph; Stanley, Jessica; Davis, Nicola

2016-07-01

Science shows provide a method of introducing large public audiences to physics concepts in a nonformal learning environment. While these shows have the potential to provide novel means of educational engagement, it is often difficult to measure that engagement. We present a method of producing an interactive physics show that seeks to provide effective and measurable audience engagement. We share our results from piloting this method at a leading music and arts festival as well as a science festival. This method also facilitated the collection of opinions and feedback directly from the audience which helps explore the benefits and limitations of this type of nonformal engagement in physics education.

Diagnosis of employee engagement in metallurgical enterprise

Directory of Open Access Journals (Sweden)

B. Gajdzik

2013-01-01

Full Text Available In the theoretical part of the publication an overview of the definitions of employee engagement was conducted together with the analysis of the methods and techniques which influence the professional activity of the employees in the metallurgical enterprise. The practical part discusses the results of diagnosis of engagement in steelworks. Presented theories, as well as the research, fill the information gap concerning the engagement of the employees in metallurgical enterprises. This notion is important due to the fact that modern conditions of human resources management require the engagement of the employees as something commonly accepted and a designation of manufacturing enterprises.

Knowledge processing and faculty engagement in multicultural university settings

DEFF Research Database (Denmark)

Selmer, Jan; Jonasson, Charlotte; Lauring, Jakob

2014-01-01

In educational studies much attention has been directed to engagement as a precondition for positive student outcomes. Very few studies, however, have focused on the engagement of the faculty members. This is a regrettable omission because engagement has been argued to lead to more satisfied, more...... – and faculty engagement. Our hypotheses are based on social learning theory and social exchange theory predicting that increased knowledge sharing activities could facilitate an environment in which faculty engagement thrives. In order to test our hypotheses we use multiple regression analysis. We assessed...... indicators of behavioural, cognitive and emotional engagement. Results showed consistent positive associations between group knowledge processing and all the studied faculty engagement indicators. Implications and suggestions for future research are discussed in detail....

Analysis of Employee Engagement in a Chosen Organization

OpenAIRE

Kapcátová, Katarína

2013-01-01

The main goal of this thesis is to highlight the importance of employee engagement and deeply investigate employee engagement among selected employees in medium size organization, which operates in Liptovský Mikuláš. Besides finding out the total employee engagement, author examines the level of cognitive, physical, and emotional engagement too. Results are then compared to other studies provided by Gallup and CIPD research centers. Thesis further introduces the link between employee engageme...

Engaged Problem Formulation in IS Research

DEFF Research Database (Denmark)

Nielsen, Peter Axel; Persson, John Stouby

2016-01-01

problems requires a more substantial engagement with the different stakeholders, especially when their problems are ill structured and situated in complex organizational settings. On this basis, we present an engaged approach to formulating IS problems with, not for, IS practitioners. We have come...

Work engagement in health professions education

NARCIS (Netherlands)

van den Berg, Joost W.; Mastenbroek, Nicole J. J. M.; Scheepers, Renee A.; Jaarsma, A. Debbie C.

2017-01-01

Work engagement deserves more attention in health professions education because of its positive relations with personal well-being and performance at work. For health professions education, these outcomes have been studied on various levels. Consider engaged clinical teachers, who are seen as better

Engaging and Disengaging with Political News

DEFF Research Database (Denmark)

Ørmen, Jacob; Linaa Jensen, Jakob

(most notably by Prior, 2007; Stromback, Djerf-Pierre, & Shehata, 2012) that this development also can lead to an increase in the number of people who utilize this enhanced media choice to skip news altogether. One area that merits special attention in this context is political news. Critical engagement......, 1992) and 'performance of identity' (Madianou, 2009) that take place throughout people's everyday life. To further understand these processes it is important to attend to how users engage – or disengage – with political news. To do this we present a typology of news users based on an exploratory...... and conversing face-to-face) that users engage in for political discussion, and compare these across demographics as well as relevant media use patterns. The findings from the survey will be supplemented by results from a series of qualitative interviews that shed light on the motivations users have for engaging...

Intra-clutch and inter-colony variability in element concentrations in eggshells of the black-headed gull, Chroicocephalus ridibundus, in northern Poland.

Science.gov (United States)

Kitowski, Ignacy; Indykiewicz, Piotr; Wiącek, Dariusz; Jakubas, Dariusz

2017-04-01

Eggshells are good bioindicators of environmental contamination, and therefore, the concentrations of 17 trace elements in 87 eggshells of black-headed gulls, Chroicocephalus ridibundus, were determined in five breeding colonies in an area dominated by farmland in northern Poland. The intra-clutch variability in the eggshell concentrations of heavy metals and other elements was also investigated, and the concentrations of the elements showed the following pattern: Ca > Mg > Sr > Fe > Zn > Al > Cr > Se > Mn > Cu > Pb > As > Ni > Mo = V > Sc > Cd. The concentrations of Fe, Al, and Mn decreased with the order in which the eggs were laid, but Sr concentrations increased. In contrast, the concentration of Cu significantly increased with the laying date. The concentrations of all elements significantly differed among the studied colonies; the highest concentration of eight elements was found in the eggshells from the Kusowo colony, which may have resulted from the intensive use of fertilizers, manure, and slurry in the surrounding agricultural region. The concentrations of Mg, Sr, and Zn in the eggshells from Skoki Duże were higher than those of the other studied colonies, which may have occurred because the gulls were nesting in a functioning gravel pit; soil and the parent rock are natural reservoirs of these elements. The observed element levels indicate that the environment where the black-headed gull eggs were formed, i.e., primarily near the breeding colonies, remains in a relatively unpolluted state, which was reflected by the low levels of Cd, Ni, and Pb and the lack of measurable levels of Hg.

I am engaged, I feel good, and I go the extra-mile: Reciprocal relationships between work engagement and consequences

Directory of Open Access Journals (Sweden)

Silvia Simbula

2013-01-01

Full Text Available El objetivo del presente estudio fue examinar las relaciones longitudinales entre el engagement en el trabajo, los problemas de salud mental, la satisfacción laboral y el rendimiento extra-laboral (tradicionalmente considerados como " consecuencias " del engagement en términos de causalidad recíproca. Partiendo de la teoría de conservación de los recursos, la teoría de ampliación y construcción de las emociones positivas y los estudios anteriores, nuestra hipótesis fue que las relaciones entre el engagement y esos resultados son recíprocas en el tiempo. El estudio se realizó en una muestra de 157 maestros de escuela y el intervalo de tiempo era de cinco meses. Los resultados de análisis de modelos de ecuaciones estructurales muestran que el modelo de las relaciones recíprocas entre el engagement y los resultados mostraba el mejor ajuste a los datos. Específicamente, el engagement en T1 predijo los problemas de salud mental, la satisfacción laboral y las conductas de ciudadanía organizacional en T2. Por otra parte, los problemas de salud mental en T1 se relacionaban negativamente con el engagement en T2, mientras que la satisfacción laboral en T1 y los comportamientos organizacionales de ciudadanía en T1se relacionaron positivamente con el engagement en T2. En general, nuestros resultados proporcionan evidencia de una influencia recíproca entre engagement en el trabajo y estos constructos, lo que significa que ninguno de ellos puede considerarse sólo como causa o sólo como consecuencia.

Creating a culture where employee engagement Thrives

International Nuclear Information System (INIS)

Don Groover, C.S.P.

2007-01-01

Safety leaders across industries face a critical challenge: engaging employees. While engagement of a few people may be easy in short-term projects, it is significantly more difficult with long-term processes. In this session we show leaders how they can create a culture where workers are more open and even eager to be involved in safety efforts. Our experience with safety leaders in the nuclear industry has verified that when the factors that drive organizational functioning are understood, leaders are enabled to augment employee engagement and attain significant improvement in safety outcomes. The underlying factors that influence employee engagement, performance, outcomes, and organizational culture are the same the world over. We will also show how safety is capable, by its intrinsic value, of winning profound support and direct engagement of employees. In this session, we will examine how leaders can leverage their decisions and actions to win over employees to safety and support them in their endeavors to promote it. Using the safety leadership best practices Vision, Credibility, Accountability, Communication, Collaboration, Action Orientation, and Recognition and Feedback, leaders increase their impact on their organization in favor of a culture that supports safety and employee engagement. Leaders that create a climate and culture where employee engagement thrives, realize better safety results. Leadership is not exclusively an inborn talent; it can be developed and enhanced. To this end, we will also show the advantages of transformational leadership style by comparing it to more classical transactional leadership

Creating a culture where employee engagement Thrives

Energy Technology Data Exchange (ETDEWEB)

Don Groover, C.S.P. [Behavioral Science Technology, Ojai, CA (United States)

2007-07-01

Safety leaders across industries face a critical challenge: engaging employees. While engagement of a few people may be easy in short-term projects, it is significantly more difficult with long-term processes. In this session we show leaders how they can create a culture where workers are more open and even eager to be involved in safety efforts. Our experience with safety leaders in the nuclear industry has verified that when the factors that drive organizational functioning are understood, leaders are enabled to augment employee engagement and attain significant improvement in safety outcomes. The underlying factors that influence employee engagement, performance, outcomes, and organizational culture are the same the world over. We will also show how safety is capable, by its intrinsic value, of winning profound support and direct engagement of employees. In this session, we will examine how leaders can leverage their decisions and actions to win over employees to safety and support them in their endeavors to promote it. Using the safety leadership best practices Vision, Credibility, Accountability, Communication, Collaboration, Action Orientation, and Recognition and Feedback, leaders increase their impact on their organization in favor of a culture that supports safety and employee engagement. Leaders that create a climate and culture where employee engagement thrives, realize better safety results. Leadership is not exclusively an inborn talent; it can be developed and enhanced. To this end, we will also show the advantages of transformational leadership style by comparing it to more classical transactional leadership.

Work engagement: a influência da personalidade e do clima organizacional no engagement

OpenAIRE

Bento, Cláudia Filipa Pais Henriques

2017-01-01

Dissertação de mestrado em Psicologia Aplicada O engagement tem um papel fulcral nas organizações, caracterizando-se pelo positivismo que os trabalhadores experimentam, determinado pelo vigor, dedicação e absorção. Sendo o clima organizacional a perceção dos colaboradores acerca da organização este irá influenciar o seu comportamento e os seus níveis de engagement traduzindo-se assim na sua produtividade. O presente estudo pretende analisar se as facetas da personalidade dos tr...

The relationship between early growth and survival of hatchling saltwater crocodiles (Crocodylus porosus in captivity.

Directory of Open Access Journals (Sweden)

Matthew L Brien

Full Text Available Hatchling fitness in crocodilians is affected by "runtism" or failure to thrive syndrome (FTT in captivity. In this study, 300 hatchling C. porosus, artificially incubated at 32°C for most of their embryonic development, were raised in semi-controlled conditions, with growth criteria derived for the early detection of FTT (within 24 days. Body mass, four days after hatching (BM4d, was correlated with egg size and was highly clutch specific, while snout-vent length (SVL4d was much more variable within and between clutches. For the majority of hatchlings growth trajectories within the first 24 days continued to 90 days and could be used to predict FTT affliction up to 300 days, highlighting the importance of early growth. Growth and survival of hatchling C. porosus in captivity was not influenced by initial size (BM4d, with a slight tendency for smaller hatchlings to grow faster in the immediate post-hatching period. Strong clutch effects (12 clutches on affliction with FTT were apparent, but could not be explained by measured clutch variables or other factors. Among individuals not afflicted by FTT (N = 245, mean growth was highly clutch specific, and the variation could be explained by an interaction between clutch and season. FTT affliction was 2.5 times higher among clutches (N = 7 that hatched later in the year when mean minimum air temperatures were lower, compared with those clutches (N = 5 that hatched early in the year. The results of this study highlight the importance of early growth in hatchling C. porosus, which has implications for the captive management of this species.