Cloud's Center of Gravity – a compact approach to analyze convective cloud development

Directory of Open Access Journals (Sweden)

I. Koren

2009-01-01

Full Text Available As cloud resolving models become more detailed, with higher resolution outputs, it is often complicated to isolate the physical processes that control the cloud attributes. Moreover, due to the high dimensionality and complexity of the model output, the analysis and interpretation of the results can be very complicated. Here we suggest a novel approach to convective cloud analysis that yields more insight into the physical and temporal evolution of clouds, and is compact and efficient. The different (3-D cloud attributes are weighted and projected onto a single point in space and in time, that has properties of, or similar to, the Center Of Gravity (COG. The location, magnitude and spread of this variable are followed in time. The implications of the COG approach are demonstrated for a study of aerosol effects on a warm convective cloud. We show that in addition to reducing dramatically the dimensionality of the output, such an approach often enhances the signal, adds more information, and makes the physical description of cloud evolution clearer, allowing unambiguous comparison of clouds evolving in different environmental conditions. This approach may also be useful for analysis of cloud data retrieved from surface or space-based cloud radars.

ATLAS WORLD-cloud and networking in PanDA

Science.gov (United States)

Barreiro Megino, F.; De, K.; Di Girolamo, A.; Maeno, T.; Walker, R.; ATLAS Collaboration

2017-10-01

The ATLAS computing model was originally designed as static clouds (usually national or geographical groupings of sites) around the Tier 1 centres, which confined tasks and most of the data traffic. Since those early days, the sites’ network bandwidth has increased at 0(1000) and the difference in functionalities between Tier 1s and Tier 2s has reduced. After years of manual, intermediate solutions, we have now ramped up to full usage of World-cloud, the latest step in the PanDA Workload Management System to increase resource utilization on the ATLAS Grid, for all workflows (MC production, data (re)processing, etc.). We have based the development on two new site concepts. Nuclei sites are the Tier 1s and large Tier 2s, where tasks will be assigned and the output aggregated, and satellites are the sites that will execute the jobs and send the output to their nucleus. PanDA dynamically pairs nuclei and satellite sites for each task based on the input data availability, capability matching, site load and network connectivity. This contribution will introduce the conceptual changes for World-cloud, the development necessary in PanDA, an insight into the network model and the first half-year of operational experience.

76 FR 12096 - McCloud-Pit Project; Notice of Availability of the Final Environmental Impact Statement for the...

Science.gov (United States)

2011-03-04

... Project; Notice of Availability of the Final Environmental Impact Statement for the Mccloud-Pit... Pit Rivers in Shasta County, California and has prepared a final environmental impact statement (EIS... and the alternatives for relicensing the McCloud-Pit Project. The final EIS documents the views of...

Insights from a Regime Decomposition Approach on CERES and CloudSat-inferred Cloud Radiative Effects

Science.gov (United States)

Oreopoulos, L.; Cho, N.; Lee, D.

2015-12-01

Our knowledge of the Cloud Radiative Effect (CRE) not only at the Top-of-the-Atmosphere (TOA), but also (with the help of some modeling) at the surface (SFC) and within the atmospheric column (ATM) has been steadily growing in recent years. Not only do we have global values for these CREs, but we can now also plot global maps of their geographical distribution. The next step in our effort to advance our knowledge of CRE is to systematically assess the contributions of prevailing cloud systems to the global values. The presentation addresses this issue directly. We identify the world's prevailing cloud systems, which we call "Cloud Regimes" (CRs) via clustering analysis of MODIS (Aqua-Terra) daily joint histograms of Cloud Top Pressure and Cloud Optical Thickness (TAU) at 1 degree scales. We then composite CERES diurnal values of CRE (TOA, SFC, ATM) separately for each CR by averaging these values for each CR occurrence, and thus find the contribution of each CR to the global value of CRE. But we can do more. We can actually decompose vertical profiles of inferred instantaneous CRE from CloudSat/CALIPSO (2B-FLXHR-LIDAR product) by averaging over Aqua CR occurrences (since A-Train formation flying allows collocation). Such an analysis greatly enhances our understanding of the radiative importance of prevailing cloud mixtures at different atmospheric levels. We can, for example, in addition to examining whether the CERES findings on which CRs contribute to radiative cooling and warming of the atmospheric column are consistent with CloudSat, also gain insight on why and where exactly this happens from the shape of the full instantaneous CRE vertical profiles.

Multifunctional chitosan/polyvinyl pyrrolidone/45S5 Bioglass® scaffolds for MC3T3-E1 cell stimulation and drug release

Energy Technology Data Exchange (ETDEWEB)

Yao, Qingqing [Institute of Advanced Materials for Nano-Bio Applications, School of Ophthalmology & Optometry, Wenzhou Medical University, 270 Xueyuan Xi Road, Wenzhou, Zhejiang 325027 (China); Li, Wei [Institute of Biomaterials, Department of Materials Science and Engineering, University of Erlangen-Nuremberg, Cauerstrasse 6, Erlangen 91058 (Germany); Yu, Shanshan; Ma, Liwei [Institute of Advanced Materials for Nano-Bio Applications, School of Ophthalmology & Optometry, Wenzhou Medical University, 270 Xueyuan Xi Road, Wenzhou, Zhejiang 325027 (China); Jin, Dayong [Institute for Biomedical Materials and Devices, Faculty of Science, University of Technology Sydney, NSW 2007 (Australia); Advanced Cytometry Labs, ARC Center of Excellence for Nanoscale BioPhotonics, Macquarie University, Sydney, NSW 2109 (Australia); Boccaccini, Aldo R., E-mail: Aldo.Boccaccini@ww.uni-erlangen.de [Institute of Biomaterials, Department of Materials Science and Engineering, University of Erlangen-Nuremberg, Cauerstrasse 6, Erlangen 91058 (Germany); Liu, Yong, E-mail: yongliu1980@hotmail.com [Institute of Advanced Materials for Nano-Bio Applications, School of Ophthalmology & Optometry, Wenzhou Medical University, 270 Xueyuan Xi Road, Wenzhou, Zhejiang 325027 (China); Advanced Cytometry Labs, ARC Center of Excellence for Nanoscale BioPhotonics, Macquarie University, Sydney, NSW 2109 (Australia)

2015-11-01

Novel chitosan–polyvinyl pyrrolidone/45S5 Bioglass® (CS-PVP/BG) scaffolds were prepared via foam replication and chemical cross-linking techniques. The pristine BG, CS-PVP coated BG and genipin cross-linked CS-PVP/BG (G-CS-PVP/BG) scaffolds were synthesized and characterized in terms of chemical composition, physical structure and morphology respectively. Resistance to enzymatic degradation of the scaffold is improved significantly with the use of genipin cross-linked CS-PVP. The bio-effects of scaffolds on MC3T3-E1 osteoblast-like cells were evaluated by studying cell viability, adhesion and proliferation. The CCK-8 assay shows that cell viability on the resulting G-CS-PVP/BG scaffold is improved obviously after cross-linking of genipin. Cell skeleton images exhibit that well-stretched F-actin bundles are obtained on the G-CS-PVP/BG scaffold. SEM results present significant improvement on the cell adhesion and proliferation for cells cultured on the G-CS-PVP/BG scaffold. The drug release performance on the as-synthesized scaffold was studied in a phosphate buffered saline (PBS) solution. Vancomycin is found to be released in burst fashion within 24 h from the pristine BG scaffold, however, the release period from the G-CS-PVP/BG scaffold is enhanced to 7 days, indicating improved drug release properties of the G-CS-PVP/BG scaffold. Our results suggest that the G-CS-PVP/BG scaffolds possess promising physicochemical properties, sustained drug release capability and good biocompatibility for MC3T3-E1 cells' proliferation and adhesion, suggesting their potential applications in areas such as MC3T3-E1 cell stimulation and bone tissue engineering. - Highlights: • Novel genipi–chitosan–polyvinyl pyrrolidone/45S5 Bioglass® scaffolds are prepared. • Resistance to enzymatic degradation of the scaffold is improved significantly. • The resulting scaffold shows enhanced MC3T3-E1 cell adhesion and proliferation. • Release of antibiotic vancomycin from the

Multifunctional chitosan/polyvinyl pyrrolidone/45S5 Bioglass® scaffolds for MC3T3-E1 cell stimulation and drug release

International Nuclear Information System (INIS)

Yao, Qingqing; Li, Wei; Yu, Shanshan; Ma, Liwei; Jin, Dayong; Boccaccini, Aldo R.; Liu, Yong

2015-01-01

Novel chitosan–polyvinyl pyrrolidone/45S5 Bioglass® (CS-PVP/BG) scaffolds were prepared via foam replication and chemical cross-linking techniques. The pristine BG, CS-PVP coated BG and genipin cross-linked CS-PVP/BG (G-CS-PVP/BG) scaffolds were synthesized and characterized in terms of chemical composition, physical structure and morphology respectively. Resistance to enzymatic degradation of the scaffold is improved significantly with the use of genipin cross-linked CS-PVP. The bio-effects of scaffolds on MC3T3-E1 osteoblast-like cells were evaluated by studying cell viability, adhesion and proliferation. The CCK-8 assay shows that cell viability on the resulting G-CS-PVP/BG scaffold is improved obviously after cross-linking of genipin. Cell skeleton images exhibit that well-stretched F-actin bundles are obtained on the G-CS-PVP/BG scaffold. SEM results present significant improvement on the cell adhesion and proliferation for cells cultured on the G-CS-PVP/BG scaffold. The drug release performance on the as-synthesized scaffold was studied in a phosphate buffered saline (PBS) solution. Vancomycin is found to be released in burst fashion within 24 h from the pristine BG scaffold, however, the release period from the G-CS-PVP/BG scaffold is enhanced to 7 days, indicating improved drug release properties of the G-CS-PVP/BG scaffold. Our results suggest that the G-CS-PVP/BG scaffolds possess promising physicochemical properties, sustained drug release capability and good biocompatibility for MC3T3-E1 cells' proliferation and adhesion, suggesting their potential applications in areas such as MC3T3-E1 cell stimulation and bone tissue engineering. - Highlights: • Novel genipi–chitosan–polyvinyl pyrrolidone/45S5 Bioglass® scaffolds are prepared. • Resistance to enzymatic degradation of the scaffold is improved significantly. • The resulting scaffold shows enhanced MC3T3-E1 cell adhesion and proliferation. • Release of antibiotic vancomycin from the

APLIKASI ANALISIS DISKRIMINAN DALAM MENENTUKAN KEPUTUSAN PEMBELIAN PRODUK McCafe (Studi Kasus: McDonald’s Jimbaran Bali

Directory of Open Access Journals (Sweden)

TRISNA RAMADHAN

2018-02-01

Full Text Available McDonald’s is one of fast food company that is growing rapidly. McDonald’s continues to innovate to satisfy customers. It introduced the concept of a cafe with the name McCafe. Because of the competition with other fast food restaurants, McDonald’s needs to improve the quality of McCafe favored by customers. Thus, this research was conducted to aim at getting the indicators that are best describing customers characteristic. This research used discriminant analysis methods. Discriminant analysis was used to classify customers into groups of loyal customers or non loyal customers.. The indicators that distinguished the decision of the customer to buy McCafe Jimbaran product were affordable prices and locations that are easily accessible to customers. The formed discriminant function had an accuracy of 91,67 percent in classifying the customers.

Is McMurray′s osteotomy obsolete?

Directory of Open Access Journals (Sweden)

Phaltankar P

1995-10-01

Full Text Available A review of the method of performing, advantages, disadvantages of McMurray′s displacement osteotomy with regard to treatment of nonunion of transcervical fracture neck femur with viable femoral head was carried out in this study of ten cases, in view of the abandonment of the procedure in favour of angulation osteotomy. Good results obtained in the series attest to the usefulness of McMurray′s osteotomy in the difficult problem of nonunion of transcervical fracture neck femur in well selected cases with certain advantages over the angulation osteotomy due to the ′Armchair effect′.

3D MODELING OF GJ1214b's ATMOSPHERE: FORMATION OF INHOMOGENEOUS HIGH CLOUDS AND OBSERVATIONAL IMPLICATIONS

Energy Technology Data Exchange (ETDEWEB)

Charnay, B.; Meadows, V.; Misra, A.; Arney, G. [Astronomy Department, University of Washington, Seattle, WA 98125 (United States); Leconte, J., E-mail: bcharnay@uw.edu [Canadian Institute for Theoretical Astrophysics, 60 St George Street, University of Toronto, Toronto, ON M5S 3H8 (Canada)

2015-11-01

The warm sub-Neptune GJ1214b has a featureless transit spectrum that may be due to the presence of high and thick clouds or haze. Here, we simulate the atmosphere of GJ1214b with a 3D General Circulation Model for cloudy hydrogen-dominated atmospheres, including cloud radiative effects. We show that the atmospheric circulation is strong enough to transport micrometric cloud particles to the upper atmosphere and generally leads to a minimum of cloud at the equator. By scattering stellar light, clouds increase the planetary albedo to 0.4–0.6 and cool the atmosphere below 1 mbar. However, the heating by ZnS clouds leads to the formation of a stratospheric thermal inversion above 10 mbar, with temperatures potentially high enough on the dayside to evaporate KCl clouds. We show that flat transit spectra consistent with Hubble Space Telescope observations are possible if cloud particle radii are around 0.5 μm, and that such clouds should be optically thin at wavelengths >3 μm. Using simulated cloudy atmospheres that fit the observed spectra we generate transit, emission, and reflection spectra and phase curves for GJ1214b. We show that a stratospheric thermal inversion would be readily accessible in near- and mid-infrared atmospheric spectral windows. We find that the amplitude of the thermal phase curves is strongly dependent on metallicity, but only slightly impacted by clouds. Our results suggest that primary and secondary eclipses and phase curves observed by the James Webb Space Telescope in the near- to mid-infrared should provide strong constraints on the nature of GJ1214b's atmosphere and clouds.

Architecting the cloud design decisions for cloud computing service models (SaaS, PaaS, and IaaS)

CERN Document Server

Kavis, Michael J

2014-01-01

An expert guide to selecting the right cloud service model for your business Cloud computing is all the rage, allowing for the delivery of computing and storage capacity to a diverse community of end-recipients. However, before you can decide on a cloud model, you need to determine what the ideal cloud service model is for your business. Helping you cut through all the haze, Architecting the Cloud is vendor neutral and guides you in making one of the most critical technology decisions that you will face: selecting the right cloud service model(s) based on a combination of both business and tec

Scanning Cloud Radar Observations at Azores: Preliminary 3D Cloud Products

Energy Technology Data Exchange (ETDEWEB)

Kollias, P.; Johnson, K.; Jo, I.; Tatarevic, A.; Giangrande, S.; Widener, K.; Bharadwaj, N.; Mead, J.

2010-03-15

The deployment of the Scanning W-Band ARM Cloud Radar (SWACR) during the AMF campaign at Azores signals the first deployment of an ARM Facility-owned scanning cloud radar and offers a prelude for the type of 3D cloud observations that ARM will have the capability to provide at all the ARM Climate Research Facility sites by the end of 2010. The primary objective of the deployment of Scanning ARM Cloud Radars (SACRs) at the ARM Facility sites is to map continuously (operationally) the 3D structure of clouds and shallow precipitation and to provide 3D microphysical and dynamical retrievals for cloud life cycle and cloud-scale process studies. This is a challenging task, never attempted before, and requires significant research and development efforts in order to understand the radar's capabilities and limitations. At the same time, we need to look beyond the radar meteorology aspects of the challenge and ensure that the hardware and software capabilities of the new systems are utilized for the development of 3D data products that address the scientific needs of the new Atmospheric System Research (ASR) program. The SWACR observations at Azores provide a first look at such observations and the challenges associated with their analysis and interpretation. The set of scan strategies applied during the SWACR deployment and their merit is discussed. The scan strategies were adjusted for the detection of marine stratocumulus and shallow cumulus that were frequently observed at the Azores deployment. Quality control procedures for the radar reflectivity and Doppler products are presented. Finally, preliminary 3D-Active Remote Sensing of Cloud Locations (3D-ARSCL) products on a regular grid will be presented, and the challenges associated with their development discussed. In addition to data from the Azores deployment, limited data from the follow-up deployment of the SWACR at the ARM SGP site will be presented. This effort provides a blueprint for the effort required

Retrieval of Boundary Layer 3D Cloud Properties Using Scanning Cloud Radar and 3D Radiative Transfer

Energy Technology Data Exchange (ETDEWEB)

Marchand, Roger [Univ. of Washington, Seattle, WA (United States)

2017-01-24

Retrievals of cloud optical and microphysical properties for boundary layer clouds, including those widely used by ASR investigators, frequently assume that clouds are sufficiently horizontally homogeneous that scattering and absorption (at all wavelengths) can be treated using one dimensional (1D) radiative transfer, and that differences in the field-of-view of different sensors are unimportant. Unfortunately, most boundary layer clouds are far from horizontally homogeneous, and numerous theoretical and observational studies show that the assumption of horizontal homogeneity leads to significant errors. The introduction of scanning cloud and precipitation radars at the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) program sites presents opportunities to move beyond the horizontally homogeneous assumption. The primary objective of this project was to develop a 3D retrieval for warm-phase (liquid only) boundary layer cloud microphysical properties, and to assess errors in current 1D (non-scanning) approaches. Specific research activities also involved examination of the diurnal cycle of hydrometeors as viewed by ARM cloud radar, and continued assessment of precipitation impacts on retrievals of cloud liquid water path using passive microwaves.

McDonald’s Corporation - 2015 (MCD

Directory of Open Access Journals (Sweden)

Alen Badal

2017-07-01

Full Text Available McDonald’s Corporation, 2015 is aiming to enlighten the “Experience of the Future” for consumers, with a special focus on the ‘younger’ generation. Beginning in 2015 and moving forward, McDonald’s has operationalized the functions of its strategy to bett er serve consumers with such offerings as trial-testing a build-your-burger strategy with the order being served at the table, known as the “Create Your Taste” program. The restaurant chain has introduced the all-day breakfast menu and ‘McPick 2’ for $5.00. Additionally, the company has engaged consumers by way of social media and is interested in having a smart phone application in use. Other roll-outs include processing transactions by way of mobile-payment with such channels as ‘Google Wallet, Soft card and Apple Pay.’ The fast-food giant continues to test a variety of strategies at select locations aimed at increasing shareholder value as a result of both introducing and modifying the point-of-sale services and food & beverage offerings¹.

Peter McLaren & the 3 R’s: Reflection, Resistance and Revolution

Directory of Open Access Journals (Sweden)

David Gabbard

2006-10-01

Full Text Available I cannot feign some distanced objectivity in writing this profile of Peter McLaren. Our relationship dates back to 1989, when Philip Stedman, one of my professors at the University of Cincinnati, invited me to accompany him on a visit to Peter at nearby Miami University of Ohio. I had read some of Peter’s work, particularly some of his early collaborations with Henry Giroux, who had helped bring Peter to Miami from Canada. No amount of reading, however, could have prepared me for meeting him face-to-face.

Molecular clouds toward three Spitzer bubbles S116, S117, and S118: Evidence for a cloud-cloud collision which formed the three H II regions and a 10 pc scale molecular cavity

Science.gov (United States)

Fukui, Yasuo; Ohama, Akio; Kohno, Mikito; Torii, Kazufumi; Fujita, Shinji; Hattori, Yusuke; Nishimura, Atsushi; Yamamoto, Hiroaki; Tachihara, Kengo

2018-05-01

We carried out a molecular-line study toward the three Spitzer bubbles S116, S117, and S118, which show active formation of high-mass stars. We found molecular gas consisting of two components with a velocity difference of ˜5 km s-1. One of them, the small cloud, has a typical velocity of -63 km s-1 and the other, the large cloud, has one of -58 km s-1. The large cloud has a nearly circular intensity depression, the size of which is similar to that of the small cloud. We present an interpretation that its cavity was created by a collision between the two clouds and that this collision compressed the gas into a dense layer elongating along the western rim of the small cloud. In this scenario, the O stars including those in the three Spitzer bubbles were formed in the interface layer compressed by the collision. Assuming that the relative motion of the clouds has a tilt of 45° to the line of sight, we estimate that the collision continued for the last 1 Myr at a relative velocity of ˜10 km s-1. In the S116-S117-S118 system the H II regions are located outside of the cavity. This morphology is ascribed to the density-bound distribution of the large cloud which caused the H II regions to expand more easily toward the outer part of the large cloud than towards the inside of the cavity. The present case proves that a cloud-cloud collision creates a cavity without the action of O-star feedback, and suggests that the collision-compressed layer is highly filamentary.

Sensitivity of Cirrus and Mixed-phase Clouds to the Ice Nuclei Spectra in McRAS-AC: Single Column Model Simulations

Science.gov (United States)

Betancourt, R. Morales; Lee, D.; Oreopoulos, L.; Sud, Y. C.; Barahona, D.; Nenes, A.

2012-01-01

The salient features of mixed-phase and ice clouds in a GCM cloud scheme are examined using the ice formation parameterizations of Liu and Penner (LP) and Barahona and Nenes (BN). The performance of LP and BN ice nucleation parameterizations were assessed in the GEOS-5 AGCM using the McRAS-AC cloud microphysics framework in single column mode. Four dimensional assimilated data from the intensive observation period of ARM TWP-ICE campaign was used to drive the fluxes and lateral forcing. Simulation experiments where established to test the impact of each parameterization in the resulting cloud fields. Three commonly used IN spectra were utilized in the BN parameterization to described the availability of IN for heterogeneous ice nucleation. The results show large similarities in the cirrus cloud regime between all the schemes tested, in which ice crystal concentrations were within a factor of 10 regardless of the parameterization used. In mixed-phase clouds there are some persistent differences in cloud particle number concentration and size, as well as in cloud fraction, ice water mixing ratio, and ice water path. Contact freezing in the simulated mixed-phase clouds contributed to transfer liquid to ice efficiently, so that on average, the clouds were fully glaciated at T approximately 260K, irrespective of the ice nucleation parameterization used. Comparison of simulated ice water path to available satellite derived observations were also performed, finding that all the schemes tested with the BN parameterization predicted 20 average values of IWP within plus or minus 15% of the observations.

Assessing 1D Atmospheric Solar Radiative Transfer Models: Interpretation and Handling of Unresolved Clouds.

Science.gov (United States)

Barker, H. W.; Stephens, G. L.; Partain, P. T.; Bergman, J. W.; Bonnel, B.; Campana, K.; Clothiaux, E. E.; Clough, S.; Cusack, S.; Delamere, J.; Edwards, J.; Evans, K. F.; Fouquart, Y.; Freidenreich, S.; Galin, V.; Hou, Y.; Kato, S.; Li, J.;  Mlawer, E.;  Morcrette, J.-J.;  O'Hirok, W.;  Räisänen, P.;  Ramaswamy, V.;  Ritter, B.;  Rozanov, E.;  Schlesinger, M.;  Shibata, K.;  Sporyshev, P.;  Sun, Z.;  Wendisch, M.;  Wood, N.;  Yang, F.

2003-08-01

The primary purpose of this study is to assess the performance of 1D solar radiative transfer codes that are used currently both for research and in weather and climate models. Emphasis is on interpretation and handling of unresolved clouds. Answers are sought to the following questions: (i) How well do 1D solar codes interpret and handle columns of information pertaining to partly cloudy atmospheres? (ii) Regardless of the adequacy of their assumptions about unresolved clouds, do 1D solar codes perform as intended?One clear-sky and two plane-parallel, homogeneous (PPH) overcast cloud cases serve to elucidate 1D model differences due to varying treatments of gaseous transmittances, cloud optical properties, and basic radiative transfer. The remaining four cases involve 3D distributions of cloud water and water vapor as simulated by cloud-resolving models. Results for 25 1D codes, which included two line-by-line (LBL) models (clear and overcast only) and four 3D Monte Carlo (MC) photon transport algorithms, were submitted by 22 groups. Benchmark, domain-averaged irradiance profiles were computed by the MC codes. For the clear and overcast cases, all MC estimates of top-of-atmosphere albedo, atmospheric absorptance, and surface absorptance agree with one of the LBL codes to within ±2%. Most 1D codes underestimate atmospheric absorptance by typically 15-25 W m-2 at overhead sun for the standard tropical atmosphere regardless of clouds.Depending on assumptions about unresolved clouds, the 1D codes were partitioned into four genres: (i) horizontal variability, (ii) exact overlap of PPH clouds, (iii) maximum/random overlap of PPH clouds, and (iv) random overlap of PPH clouds. A single MC code was used to establish conditional benchmarks applicable to each genre, and all MC codes were used to establish the full 3D benchmarks. There is a tendency for 1D codes to cluster near their respective conditional benchmarks, though intragenre variances typically exceed those for

Toward real-time Monte Carlo simulation using a commercial cloud computing infrastructure.

Science.gov (United States)

Wang, Henry; Ma, Yunzhi; Pratx, Guillem; Xing, Lei

2011-09-07

Monte Carlo (MC) methods are the gold standard for modeling photon and electron transport in a heterogeneous medium; however, their computational cost prohibits their routine use in the clinic. Cloud computing, wherein computing resources are allocated on-demand from a third party, is a new approach for high performance computing and is implemented to perform ultra-fast MC calculation in radiation therapy. We deployed the EGS5 MC package in a commercial cloud environment. Launched from a single local computer with Internet access, a Python script allocates a remote virtual cluster. A handshaking protocol designates master and worker nodes. The EGS5 binaries and the simulation data are initially loaded onto the master node. The simulation is then distributed among independent worker nodes via the message passing interface, and the results aggregated on the local computer for display and data analysis. The described approach is evaluated for pencil beams and broad beams of high-energy electrons and photons. The output of cloud-based MC simulation is identical to that produced by single-threaded implementation. For 1 million electrons, a simulation that takes 2.58 h on a local computer can be executed in 3.3 min on the cloud with 100 nodes, a 47× speed-up. Simulation time scales inversely with the number of parallel nodes. The parallelization overhead is also negligible for large simulations. Cloud computing represents one of the most important recent advances in supercomputing technology and provides a promising platform for substantially improved MC simulation. In addition to the significant speed up, cloud computing builds a layer of abstraction for high performance parallel computing, which may change the way dose calculations are performed and radiation treatment plans are completed.

Toward real-time Monte Carlo simulation using a commercial cloud computing infrastructure

International Nuclear Information System (INIS)

Wang, Henry; Ma Yunzhi; Pratx, Guillem; Xing Lei

2011-01-01

Monte Carlo (MC) methods are the gold standard for modeling photon and electron transport in a heterogeneous medium; however, their computational cost prohibits their routine use in the clinic. Cloud computing, wherein computing resources are allocated on-demand from a third party, is a new approach for high performance computing and is implemented to perform ultra-fast MC calculation in radiation therapy. We deployed the EGS5 MC package in a commercial cloud environment. Launched from a single local computer with Internet access, a Python script allocates a remote virtual cluster. A handshaking protocol designates master and worker nodes. The EGS5 binaries and the simulation data are initially loaded onto the master node. The simulation is then distributed among independent worker nodes via the message passing interface, and the results aggregated on the local computer for display and data analysis. The described approach is evaluated for pencil beams and broad beams of high-energy electrons and photons. The output of cloud-based MC simulation is identical to that produced by single-threaded implementation. For 1 million electrons, a simulation that takes 2.58 h on a local computer can be executed in 3.3 min on the cloud with 100 nodes, a 47x speed-up. Simulation time scales inversely with the number of parallel nodes. The parallelization overhead is also negligible for large simulations. Cloud computing represents one of the most important recent advances in supercomputing technology and provides a promising platform for substantially improved MC simulation. In addition to the significant speed up, cloud computing builds a layer of abstraction for high performance parallel computing, which may change the way dose calculations are performed and radiation treatment plans are completed. (note)

Toward real-time Monte Carlo simulation using a commercial cloud computing infrastructure

Energy Technology Data Exchange (ETDEWEB)

Wang, Henry [Department of Electrical Engineering, Stanford University, Stanford, CA 94305 (United States); Ma Yunzhi; Pratx, Guillem; Xing Lei, E-mail: hwang41@stanford.edu [Department of Radiation Oncology, Stanford University School of Medicine, Stanford, CA 94305-5847 (United States)

2011-09-07

Monte Carlo (MC) methods are the gold standard for modeling photon and electron transport in a heterogeneous medium; however, their computational cost prohibits their routine use in the clinic. Cloud computing, wherein computing resources are allocated on-demand from a third party, is a new approach for high performance computing and is implemented to perform ultra-fast MC calculation in radiation therapy. We deployed the EGS5 MC package in a commercial cloud environment. Launched from a single local computer with Internet access, a Python script allocates a remote virtual cluster. A handshaking protocol designates master and worker nodes. The EGS5 binaries and the simulation data are initially loaded onto the master node. The simulation is then distributed among independent worker nodes via the message passing interface, and the results aggregated on the local computer for display and data analysis. The described approach is evaluated for pencil beams and broad beams of high-energy electrons and photons. The output of cloud-based MC simulation is identical to that produced by single-threaded implementation. For 1 million electrons, a simulation that takes 2.58 h on a local computer can be executed in 3.3 min on the cloud with 100 nodes, a 47x speed-up. Simulation time scales inversely with the number of parallel nodes. The parallelization overhead is also negligible for large simulations. Cloud computing represents one of the most important recent advances in supercomputing technology and provides a promising platform for substantially improved MC simulation. In addition to the significant speed up, cloud computing builds a layer of abstraction for high performance parallel computing, which may change the way dose calculations are performed and radiation treatment plans are completed. (note)

Multimodalinė JAV McDonald’s internetinių svetainių lokalizacija: Prancūzijos ir Lietuvos atvejis

OpenAIRE

Oldenburg, Vesta

2016-01-01

The case study provides an insight into the way in which McDonald’s corporation localize their internationalized American website for France and Lithuania regarding local cultural, sociological and historical context by employing multimodal elements. Anchored in the methodology of multimodal discourse analysis and genre and multimodality model, the research focuses on the contribution of multimodal elements – images, text, color, typography and layout – to the fulfillment of set purposes, nam...

Understanding McDonald's Among the "World’s Most Ethical Companies"

OpenAIRE

De Blasio, Gregory G.

2008-01-01

The animal welfare policies and related public communication initiatives of McDonald’s corporation are examined in the context of the organization being named as one of the world’s most ethical organizations. The result is a framework for understanding how McDonald’s and similar organizations could warrant the status of a most ethical company. Specifically, the narrative strength of the company’s articulation of an animal welfare policy and its ongoing promotion as a legitimizing ...

THE SPITZER SPECTROSCOPIC SURVEY OF THE SMALL MAGELLANIC CLOUD (S4MC): PROBING THE PHYSICAL STATE OF POLYCYCLIC AROMATIC HYDROCARBONS IN A LOW-METALLICITY ENVIRONMENT

International Nuclear Information System (INIS)

Sandstrom, Karin M.; Bolatto, Alberto D.; Bot, Caroline; Draine, B. T.; Ingalls, James G.; Israel, Frank P.; Tielens, A. G. G. M.; Jackson, James M.; Leroy, Adam K.; Li, Aigen; Rubio, Mónica; Simon, Joshua D.; Smith, J. D. T.; Stanimirović, Snežana; Van Loon, Jacco Th.

2012-01-01

We present results of mid-infrared spectroscopic mapping observations of six star-forming regions in the Small Magellanic Cloud (SMC) from the Spitzer Spectroscopic Survey of the SMC (S 4 MC). We detect the mid-IR emission from polycyclic aromatic hydrocarbons (PAHs) in all of the mapped regions, greatly increasing the range of environments where PAHs have been spectroscopically detected in the SMC. We investigate the variations of the mid-IR bands in each region and compare our results to studies of the PAH bands in the SINGS sample and in a sample of low-metallicity starburst galaxies. PAH emission in the SMC is characterized by low ratios of the 6-9 μm features relative to the 11.3 μm feature and weak 8.6 and 17.0 μm features. Interpreting these band ratios in the light of laboratory and theoretical studies, we find that PAHs in the SMC tend to be smaller and less ionized than those in higher metallicity galaxies. Based on studies of PAH destruction, we argue that a size distribution shifted toward smaller PAHs cannot be the result of processing in the interstellar medium, but instead reflects differences in the formation of PAHs at low metallicity. Finally, we discuss the implications of our observations for our understanding of the PAH life-cycle in low-metallicity galaxies—namely that the observed deficit of PAHs may be a consequence of PAHs forming with smaller average sizes and therefore being more susceptible to destruction under typical interstellar medium conditions.

CSN1S2 protein of goat milk inhibits the decrease of viability and increases the proliferation of MC3T3E1 pre-osteoblast cell in methyl glyoxal exposure

Directory of Open Access Journals (Sweden)

Choirunil Chotimah

2015-03-01

Full Text Available Objective: To investigate whether the CNS1S2 protein of goat milk is able to inhibit the toxicity of methyl glyoxal (MG towards MC3T3E1 pre-osteoblast cells. Methods: At confluency, pre-osteoblast cells were divided into five groups which included control (untreated, pre-osteoblast cells exposed to 5 µmol/L MG, pre-osteoblast cells exposed to MG in the presence of CSN1S2 protein at doses of 0.025, 0.050, and 0.100 mg/L, respectively. Analysis of reactive oxygen species was done with 2,7-dichlorodihydrofluorescein diacetate fluorochrome. The proliferation and viability of MC3T3E1 cells were measured by trypan blue staining. Malondialdehyde analysis was done colorimetrically. Results: Cell's viabilities were significantly lower in MG+0.050 mg/L CSN1S2 protein of goat milk compared to MG group (P<0.05. MG+0.100 mg/L CSN1S2 protein of goat milk significantly increased the cells viability compared to MG group (P<0.05. The levels of proliferation were significantly higher in MG+0.100 mg/L CSN1S2 protein of goat milk compared to control group and all treatment groups, respectively (P<0.05. Conclusions: High dose of CSN1S2 protein of goat milk (0.100 mg/L in high MG environment inhibits the decrease of viability due to the increases of the proliferation of MC3T3E1 preosteoblast cell.

AMF3 CloudSat Overpasses Field Campaign Report

Energy Technology Data Exchange (ETDEWEB)

Matrosov, Sergey [University of Colorado, Boulder; National Oceanic and Atmospheric Administration (NOAA), Boulder, CO (United States). Earth System Research Lab.; Hardin, Joseph [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); De Boer, Gijs [University of Colorado, Boulder; National Oceanic and Atmospheric Administration (NOAA), Boulder, CO (United States). Earth System Research Lab.; Shupe, Matthew [University of Colorado, Boulder; National Oceanic and Atmospheric Administration (NOAA), Boulder, CO (United States). Earth System Research Lab.; Maahn, Maximillian [National Oceanic and Atmospheric Administration (NOAA), Boulder, CO (United States). Earth System Research Lab.; Williams, Christopher [University of Colorado, Boulder; National Oceanic and Atmospheric Administration (NOAA), Boulder, CO (United States). Earth System Research Lab.

2017-10-15

Synergy between ground-based and satellite radar observations of clouds and precipitation is important for refining the algorithms to retrieve hydrometeor microphysical parameters, improvements in the retrieval accuracy, and better understanding the advantages and limitations of different retrieval approaches. The new dual-frequency (Ka- and W-band, 35 GHz and 94 GHz) fully polarimetric scanning U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Research Facility cloud radars (SACRs-2) are advanced sensors aimed to significantly enhance remote sensing capabilities (Kollias et al. 2016). One of these radars was deployed as part of the third ARM Mobile Facility (AMF3) at Oliktok Point, Alaska (70.495o N, 149.886oW). The National Aeronautics and Space Administration (NASA) CloudSat satellite, which is part of the polar-orbiting A-train satellite constellation, passes over the vicinity of the AMF3 location (typically within 0-7 km depending on a particular overpass) on a descending orbit every 16 days at approximately 13:21 UTC. The nadir pointing W-band CloudSat cloud profiling radar (CPR) provides vertical profiles of reflectivity that are then used for retrievals of hydrometeor parameters (Tanelli et al. 2008). The main objective of the AMF3 CloudSat overpasses intensive operating period (IOP) campaign was to collect approximately collocated in space and time radar data from the SACR-2 and the CloudSat CPR measurements for subsequent joint analysis of radar variables and microphysical retrievals of cloud and precipitation parameters. Providing the reference for the SACR-2 absolute calibration from the well-calibrated CloudSat CPR was another objective of this IOP. The IOP objectives were achieved by conducting seven special SACR-2 scans during the 10.5-min period centered at the exact time of the CloudSat overpass over the AMF3 (~1321 UTC) on six dates of the CloudSat overpasses during the three-month period allocated to this IOP. These six days

Poetic justice: A commentary on Joseph B. McCaffrey's "The brain’s heterogeneous landscape"

Directory of Open Access Journals (Sweden)

Witold Hensel

2015-12-01

Full Text Available The paper is a commentary on McCaffrey (2015. I begin by arguing that the two views on brain pluripotency that McCaffrey intends to reconcile, namely those of Price and Friston (2005 and Klein (2012, are not really in conflict. The alleged disagreement between them stems from two interpretative failures: first on the part of Klein, who has misrepresented the views of Price and Friston, and second on the part of McCaffrey, who has misconstrued Klein’s position. I then take issue with McCaffrey’s claim that each of the structurefunction mapping strategies he discusses allows researchers to discover a different kind of pluripotency: (1 where each subregion of a pluripotent brain area performs a specific function, (2 where a brain area performs a single function in multiple mechanisms (networks, and (3 where a brain area performs multiple functions in multiple mechanisms (networks.

Interstellar clouds toward 3C 154 and 3C 353

International Nuclear Information System (INIS)

Federman, S.R.; Evans, N.J. II; Willson, R.F.; Falgarone, E.; Combes, F.; Texas Univ., Austin; Tufts Univ., Medford, MA; Meudon, Observatoire, France)

1987-01-01

Molecular observations of the interstellar clouds toward the radio sources 3C 154 and 3C 353 were obtained in order to elucidate the physical conditions within the clouds. Maps of (C-12)O emission in the J = 1-0 and J = 2-1 lines were compared with observations of the (C-13)O, CH, and OH molecules. The peak emission in the (C-12)O transitions does not occur in the direction of the continuum sources, and thus, an incomplete picture arises when only one line of sight in the two clouds is analyzed. The cloud toward 3C 154 appears to have a low extinction, but a relatively high CO abundance, suggesting that it is similar to high-latitude clouds and CO-rich diffuse clouds. The cloud toward 3C 353 is considerably denser than that toward 3C 154 and may be more like a dark cloud. 32 references

7-ketocholesterol induces apoptosis of MC3T3-E1 cells associated with reactive oxygen species generation, endoplasmic reticulum stress and caspase-3/7 dependent pathway

Directory of Open Access Journals (Sweden)

Yuta Sato

2017-03-01

Full Text Available Type 2 diabetes mellitus (T2DM is associated with an increased risk of bone fractures without reduction of bone mineral density. The cholesterol oxide 7-ketocholesterol (7KCHO has been implicated in numerous diseases such as atherosclerosis, Alzheimer's disease, Parkinson's disease, cancer, age-related macular degeneration and T2DM. In the present study, 7KCHO decreased the viability of MC3T3-E1 cells, increased reactive oxygen species (ROS production and apoptotic rate, and upregulated the caspase-3/7 pathway. Furthermore, these effects of 7KCHO were abolished by pre-incubation of the cells with N-acetylcysteine (NAC, an ROS inhibitor. Also, 7KCHO enhanced the mRNA expression of two endoplasmic reticulum (ER stress markers; CHOP and GRP78, in MC3T3-E1 cells. Pre-incubation of the cells with NAC suppressed the 7KCHO-induced upregulation of CHOP, but not GRP78. In conclusion, we demonstrated that 7KCHO induced apoptosis of MC3T3-E1 cells associated with ROS generation, ER stress, and caspase-3/7 activity, and the effects of 7KCHO were abolished by the ROS inhibitor NAC. These findings may provide new insight into the relationship between oxysterol and pathophysiology of osteoporosis seen in T2DM.

Cytotoxicity of Titanate-Calcium Complexes to MC3T3 Osteoblast-Like Cells

Science.gov (United States)

Drury, Jeanie L.; Moussi, Joelle; Taylor-Pashow, Kathryn M. L.

2016-01-01

Monosodium titanates (MST) are a relatively novel form of particulate titanium dioxide that have been proposed for biological use as metal sorbents or delivery agents, most recently calcium (II). In these roles, the toxicity of the titanate or its metal complex is crucial to its biological utility. The aim of this study was to determine the cytotoxicity of MST and MST-calcium complexes with MC3T3 osteoblast-like cells; MST-Ca(II) complexes could be useful to promote bone formation in various hard tissue applications. MC3T3 cells were exposed to native MST or MST-Ca(II) complexes for 24–72 h. A CellTiter-Blue® assay was employed to assess the metabolic activity of the cells. The results showed that MST and MST-Ca(II) suppressed MC3T3 metabolic activity significantly in a dose-, time-, and cell-density-dependent fashion. MST-Ca(II) suppressed MC3T3 metabolism in a statistically identical manner as native MST at all concentrations. We concluded that MST and MST-Ca(II) are significantly cytotoxic to MC3T3 cells through a mechanism yet unknown; this is a potential problem to the biological utility of these complexes. PMID:28044136

Cytotoxicity of Titanate-Calcium Complexes to MC3T3 Osteoblast-Like Cells

Directory of Open Access Journals (Sweden)

Yen-Wei Chen

2016-01-01

Full Text Available Monosodium titanates (MST are a relatively novel form of particulate titanium dioxide that have been proposed for biological use as metal sorbents or delivery agents, most recently calcium (II. In these roles, the toxicity of the titanate or its metal complex is crucial to its biological utility. The aim of this study was to determine the cytotoxicity of MST and MST-calcium complexes with MC3T3 osteoblast-like cells; MST-Ca(II complexes could be useful to promote bone formation in various hard tissue applications. MC3T3 cells were exposed to native MST or MST-Ca(II complexes for 24–72 h. A CellTiter-Blue® assay was employed to assess the metabolic activity of the cells. The results showed that MST and MST-Ca(II suppressed MC3T3 metabolic activity significantly in a dose-, time-, and cell-density-dependent fashion. MST-Ca(II suppressed MC3T3 metabolism in a statistically identical manner as native MST at all concentrations. We concluded that MST and MST-Ca(II are significantly cytotoxic to MC3T3 cells through a mechanism yet unknown; this is a potential problem to the biological utility of these complexes.

THE SPITZER SPECTROSCOPIC SURVEY OF THE SMALL MAGELLANIC CLOUD (S{sup 4}MC): PROBING THE PHYSICAL STATE OF POLYCYCLIC AROMATIC HYDROCARBONS IN A LOW-METALLICITY ENVIRONMENT

Energy Technology Data Exchange (ETDEWEB)

Sandstrom, Karin M. [Max Planck Institut fuer Astronomie, D-69117 Heidelberg (Germany); Bolatto, Alberto D. [Department of Astronomy and Laboratory for Millimeter-wave Astronomy, University of Maryland, College Park, MD 20742 (United States); Bot, Caroline [Universite de Strasbourg, Observatoire Astronomique de Strasbourg, F-67000 Strasbourg (France); Draine, B. T. [Department of Astrophysical Sciences, Princeton University, Princeton, NJ 08544 (United States); Ingalls, James G. [Spitzer Science Center, California Institute of Technology, Pasadena, CA 91125 (United States); Israel, Frank P.; Tielens, A. G. G. M. [Sterrewacht Leiden, Leiden University, 2300 RA Leiden (Netherlands); Jackson, James M. [Institute for Astrophysical Research, Boston University, Boston, MA 02215 (United States); Leroy, Adam K. [National Radio Astronomy Observatory, Charlottesville, VA 22903 (United States); Li, Aigen [Department of Physics and Astronomy, University of Missouri, Columbia, MO 65213 (United States); Rubio, Monica [Departamento de Astronomia, Universidad de Chile, Casilla 36-D, Santiago (Chile); Simon, Joshua D. [Observatories of the Carnegie Institution of Washington, Pasadena, CA 91101 (United States); Smith, J. D. T. [Ritter Astrophysical Research Center, University of Toledo, Toledo, OH 43603 (United States); Stanimirovic, Snezana [Department of Astronomy, University of Wisconsin, Madison, Madison, WI 53703 (United States); Van Loon, Jacco Th., E-mail: sandstrom@mpia.de [Astrophysics Group, Lennard-Jones Laboratories, Keele University, Staffordshire ST5 5BG (United Kingdom)

2012-01-01

We present results of mid-infrared spectroscopic mapping observations of six star-forming regions in the Small Magellanic Cloud (SMC) from the Spitzer Spectroscopic Survey of the SMC (S{sup 4}MC). We detect the mid-IR emission from polycyclic aromatic hydrocarbons (PAHs) in all of the mapped regions, greatly increasing the range of environments where PAHs have been spectroscopically detected in the SMC. We investigate the variations of the mid-IR bands in each region and compare our results to studies of the PAH bands in the SINGS sample and in a sample of low-metallicity starburst galaxies. PAH emission in the SMC is characterized by low ratios of the 6-9 {mu}m features relative to the 11.3 {mu}m feature and weak 8.6 and 17.0 {mu}m features. Interpreting these band ratios in the light of laboratory and theoretical studies, we find that PAHs in the SMC tend to be smaller and less ionized than those in higher metallicity galaxies. Based on studies of PAH destruction, we argue that a size distribution shifted toward smaller PAHs cannot be the result of processing in the interstellar medium, but instead reflects differences in the formation of PAHs at low metallicity. Finally, we discuss the implications of our observations for our understanding of the PAH life-cycle in low-metallicity galaxies-namely that the observed deficit of PAHs may be a consequence of PAHs forming with smaller average sizes and therefore being more susceptible to destruction under typical interstellar medium conditions.

Personal Background Interview of Jim McBarron

Science.gov (United States)

McBarron, Jim; Wright, Rebecca

2012-01-01

Jim McBarron exhibits a wealth of knowledge gathered from more than 40 years of experience with NASA, EVA, and spacesuits. His biography, progression of work at NASA, impact on EVA and the U.S. spacesuit, and career accomplishments are of interest to many. Wright, from the JSC History Office, conducted a personal background interview with McBarron. This interview highlighted the influences and decision-making methods that impacted McBarron's technical and management contributions to the space program. Attendees gained insight on the external and internal NASA influences on career progression within the EVA and spacesuit, and the type of accomplishments and technical advances that committed individuals can make. He concluded the presentation with a question and answer period that included a brief discussion about close calls and Russian spacesuits.

The SO-20.3 MC and A modernization plan final report

International Nuclear Information System (INIS)

Longmire, V.L.; Ensslin, Norbert; Files, C.; Joseph, Joshua A. Jr.; Rudy, C.R.; Smith, M.K.; Russo, P.A.; Stevens, R.S.; Strittmatter, R.B.; Wilkey, D.D.; Pickett, C.; Brosey, W.; Swanson, J.

2004-01-01

Materials Control and Accountability (MC and A) provides assurance to the nation that nuclear materials are controlled in accordance with their strategic and economic importance and that the misuse, theft or diversion of these materials will be detected. MC and A plays an important part in security at nuclear facilities, especially in addressing threats such as theft of materials, environmental contamination, and nuclear safety incidents associated with nuclear materials. For this reason, it is important that MC and A takes advantage of new technologies and methods in order to provide information on a site's nuclear materials in the most timely and useful manner possible. Within the U.S. Department of Energy (DOE), the Office of Security Policy, Policy Integration and Technical Support Program (SO-20.3) is responsible for the development of safeguards and security technology that enables DOE and NNSA facilities to safeguard their Special Nuclear Materials. The SO-20.3 Program tasked safeguards personnel at Los Alamos National Laboratory to lead a project with representatives from the Y-12 Plant, Lawrence Livermore National Laboratory, and the Savannah River Site to prepare an MC and A Modernization Plan that provides recommendations for development new technologies and methodologies for MC and A in both new and existing DOE facilities. The team was tasked with taking into account new concerns about the protection of nuclear material following the attacks of September 11, 2001. Opportunities for applying new MC and A approaches and technologies that provide increased freedom of operation, increased security and provide a potential for cost savings in existing and new DOE facilities are discussed in this report.

Evolution of S stars in the Magellanic Clouds

International Nuclear Information System (INIS)

Evans, T.L.

1984-01-01

Early S stars occur between M and C stars in the colour magnitude diagrams of intermediate age globular clusters in the Magellanic Clouds. Most have -4.2 >= Msub(bol) >= -4.8 and are probably brighter in younger or more metal rich clusters. The galactic globular cluster NGC 6723 contains two marginal S stars at Msub(bol) approx. -3.3. The rare CS stars have Msub(bol) approx. -6, with no faint examples. (Auth.)

Managing IaaS and DBaaS clouds with Oracle Enterprise Manager Cloud Control 12c

CERN Document Server

Antani, Ved

2013-01-01

This book is a step-by-step tutorial filled with practical examples which will show readers how to configure and manage IaaS and DBaaS with Oracle Enterprise Manager.If you are a cloud administrator or a user of self-service provisioning systems offered by Enterprise Manager, this book is ideal for you. It will also help administrators who want to understand the chargeback mechanism offered by Enterprise Manager.An understanding of the basic building blocks of cloud computing such as networking, virtualization, storage, and so on, is needed by those of you interested in this book

McNutt to Be Nominated to Lead U.S. Geological Survey

Science.gov (United States)

Showstack, Randy

2009-07-01

U.S. President Barack Obama announced on 9 July his intention to nominate Marcia McNutt as director of the U.S. Geological Survey (USGS) and science advisor to the Secretary of the Interior. McNutt, who served as AGU president from 2000 to 2002, currently is president and chief executive officer of the Monterey Bay Aquarium Research Institute, in Moss Landing, Calif. “Scientific information from the U.S. Geological Survey is crucial to solving the most important problems facing society—finding sufficient supplies of fresh water and clean energy and providing accurate information that allows citizens to prepare intelligently for climate change. I look forward to leading such a respected institution at this critical time,” McNutt said.

A Proposed Smart E-Learning System Using Cloud Computing Services: PaaS, IaaS and Web 3.0

Directory of Open Access Journals (Sweden)

Dr.Mona M. Nasr

2012-09-01

Full Text Available E-learning systems need to improve its infrastructure, which can devote the required computation and storage resources for e-learning systems. Microsoft cloud computing technologies although in their early stages, have managed to change the way applications are going to be developed and accessed. The objective of the paper is to combine various technologies to design architecture which describe E-learning systems. Web 3.0 uses widget aggregation, intelligent retrieval, user interest modeling and semantic annotation. These technologies are aimed at running applications as services over the internet on a flexible infrastructure. Cloud computing provides a low cost solution to academic institutions for their researchers, faculty and learners. In this paper we integrate cloud computing as a platform with web 3.0 for building intelligent e-learning systems.

Tricuspid annuloplasty with the MC3 ring and septal plication technique.

Science.gov (United States)

Isomura, Tadashi; Hirota, Masanori; Hoshino, Joji; Fukada, Yasuhisa; Kondo, Taichi; Takahashi, Yu

2015-01-01

Functional tricuspid regurgitation is caused by annular dilation mainly in the posterior annulus. However, ring annuloplasty does not always prevent the recurrence of tricuspid regurgitation due to dilation of the septal annulus. We developed a septal plication technique with a 3-dimensional MC3 ring. Between 2006 and 2011, 76 patients (male/female 30/46; mean age 68 ± 11 years) with functional tricuspid regurgitation received tricuspid ring annuloplasty. After placement of the annular sutures, the 3 commissural ring portions were fixed on the equivalent commissures to plicate the anterior and posterior annulus. The end of the septal ring portion was fixed at the optimal annular position to obtain minimal tricuspid regurgitation. All patients were followed-up for a mean of 47 ± 18 months; the longest duration was 79 months. Although there was no operative death, one patient died of sepsis during hospitalization (hospital mortality 1.3%). After implantation of the MC3 ring (mean size 31.0 ± 3.3 mm), additional edge-to-edge sutures were required for minor leakage in 5 (7%) patients. The degree of tricuspid regurgitation was significantly reduced at discharge (0.5 ± 0.6) and midterm (0.6 ± 0.6) compared to 2.5 ± 0.7 before the operation (p tricuspid ring annuloplasty with a 3-dimensional MC3 ring. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Towards real-time photon Monte Carlo dose calculation in the cloud

Science.gov (United States)

Ziegenhein, Peter; Kozin, Igor N.; Kamerling, Cornelis Ph; Oelfke, Uwe

2017-06-01

Near real-time application of Monte Carlo (MC) dose calculation in clinic and research is hindered by the long computational runtimes of established software. Currently, fast MC software solutions are available utilising accelerators such as graphical processing units (GPUs) or clusters based on central processing units (CPUs). Both platforms are expensive in terms of purchase costs and maintenance and, in case of the GPU, provide only limited scalability. In this work we propose a cloud-based MC solution, which offers high scalability of accurate photon dose calculations. The MC simulations run on a private virtual supercomputer that is formed in the cloud. Computational resources can be provisioned dynamically at low cost without upfront investment in expensive hardware. A client-server software solution has been developed which controls the simulations and transports data to and from the cloud efficiently and securely. The client application integrates seamlessly into a treatment planning system. It runs the MC simulation workflow automatically and securely exchanges simulation data with the server side application that controls the virtual supercomputer. Advanced encryption standards were used to add an additional security layer, which encrypts and decrypts patient data on-the-fly at the processor register level. We could show that our cloud-based MC framework enables near real-time dose computation. It delivers excellent linear scaling for high-resolution datasets with absolute runtimes of 1.1 seconds to 10.9 seconds for simulating a clinical prostate and liver case up to 1% statistical uncertainty. The computation runtimes include the transportation of data to and from the cloud as well as process scheduling and synchronisation overhead. Cloud-based MC simulations offer a fast, affordable and easily accessible alternative for near real-time accurate dose calculations to currently used GPU or cluster solutions.

Determining Best Estimates and Uncertainties in Cloud Microphysical Parameters from ARM Field Data: Implications for Models, Retrieval Schemes and Aerosol-Cloud-Radiation Interactions

Energy Technology Data Exchange (ETDEWEB)

McFarquhar, Greg [Univ. of Illinois, Urbana, IL (United States)

2015-12-28

We proposed to analyze in-situ cloud data collected during ARM/ASR field campaigns to create databases of cloud microphysical properties and their uncertainties as needed for the development of improved cloud parameterizations for models and remote sensing retrievals, and for evaluation of model simulations and retrievals. In particular, we proposed to analyze data collected over the Southern Great Plains (SGP) during the Mid-latitude Continental Convective Clouds Experiment (MC3E), the Storm Peak Laboratory Cloud Property Validation Experiment (STORMVEX), the Small Particles in Cirrus (SPARTICUS) Experiment and the Routine AAF Clouds with Low Optical Water Depths (CLOWD) Optical Radiative Observations (RACORO) field campaign, over the North Slope of Alaska during the Indirect and Semi-Direct Aerosol Campaign (ISDAC) and the Mixed-Phase Arctic Cloud Experiment (M-PACE), and over the Tropical Western Pacific (TWP) during The Tropical Warm Pool International Cloud Experiment (TWP-ICE), to meet the following 3 objectives; derive statistical databases of single ice particle properties (aspect ratio AR, dominant habit, mass, projected area) and distributions of ice crystals (size distributions SDs, mass-dimension m-D, area-dimension A-D relations, mass-weighted fall speeds, single-scattering properties, total concentrations N, ice mass contents IWC), complete with uncertainty estimates; assess processes by which aerosols modulate cloud properties in arctic stratus and mid-latitude cumuli, and quantify aerosol’s influence in context of varying meteorological and surface conditions; and determine how ice cloud microphysical, single-scattering and fall-out properties and contributions of small ice crystals to such properties vary according to location, environment, surface, meteorological and aerosol conditions, and develop parameterizations of such effects.In this report we describe the accomplishments that we made on all 3 research objectives.

StackInsights: Cognitive Learning for Hybrid Cloud Readiness

OpenAIRE

Qiao, Mu; Bathen, Luis; Génot, Simon-Pierre; Lee, Sunhwan; Routray, Ramani

2017-01-01

Hybrid cloud is an integrated cloud computing environment utilizing a mix of public cloud, private cloud, and on-premise traditional IT infrastructures. Workload awareness, defined as a detailed full range understanding of each individual workload, is essential in implementing the hybrid cloud. While it is critical to perform an accurate analysis to determine which workloads are appropriate for on-premise deployment versus which workloads can be migrated to a cloud off-premise, the assessment...

Computational biology in the cloud: methods and new insights from computing at scale.

Science.gov (United States)

Kasson, Peter M

2013-01-01

The past few years have seen both explosions in the size of biological data sets and the proliferation of new, highly flexible on-demand computing capabilities. The sheer amount of information available from genomic and metagenomic sequencing, high-throughput proteomics, experimental and simulation datasets on molecular structure and dynamics affords an opportunity for greatly expanded insight, but it creates new challenges of scale for computation, storage, and interpretation of petascale data. Cloud computing resources have the potential to help solve these problems by offering a utility model of computing and storage: near-unlimited capacity, the ability to burst usage, and cheap and flexible payment models. Effective use of cloud computing on large biological datasets requires dealing with non-trivial problems of scale and robustness, since performance-limiting factors can change substantially when a dataset grows by a factor of 10,000 or more. New computing paradigms are thus often needed. The use of cloud platforms also creates new opportunities to share data, reduce duplication, and to provide easy reproducibility by making the datasets and computational methods easily available.

NNLO QCD corrections to the $B\\to X_s \\gamma$ matrix elements using interpolation in $m_c$

CERN Document Server

Misiak, M; Misiak, Mikolaj; Steinhauser, Matthias

2007-01-01

One of the most troublesome contributions to the NNLO QCD corrections to B -> X_s gamma originates from three-loop matrix elements of four-quark operators. A part of this contribution that is proportional to the QCD beta-function coefficient beta_0 was found in 2003 as an expansion in m_c/m_b. In the present paper, we evaluate the asymptotic behaviour of the complete contribution for m_c >> m_b/2. The asymptotic form of the beta_0-part matches the small-m_c expansion very well at the threshold m_c = m_b/2. For the remaining part, we perform an interpolation down to the measured value of m_c, assuming that the beta_0-part is a good approximation at m_c=0. Combining our results with other contributions to the NNLO QCD corrections, we find BR(B -> X_s gamma) = (3.15 +_ 0.23) x 10^-4 for E_gamma > 1.6 GeV in the B-meson rest frame. The indicated error has been obtained by adding in quadrature the following uncertainties: non-perturbative (5%), parametric (3%), higher-order perturbative (3%), and the interpolation...

Implant Angle Monitor System of MC3-II

International Nuclear Information System (INIS)

Sato, Fumiaki; Sano, Makoto; Nakaoka, Hiroaki; Fujii, Yoshito; Kudo, Tetuya; Nakanishi, Makoto; Koike, Masazumi; Fujino, Yasushi

2008-01-01

Precise implant angle control is required for the latest generation of ion implanters to meet further shrink semiconductor device requirements. Especially, the highest angle accuracy is required for Halo implant process of Logic devices. The Halo implant angle affects the device performance, because slight differences of beam divergence change the overlap profile towards the extension. Additionally, twist angle accuracy is demanded in case of channeling angle implant. Therefore monitoring beam angles and wafer twist angles is important. A new monitoring system for the MC3-II, SEN Corp.'s single wafer type medium current implanter has been developed. This paper describes the angle control performance and monitoring system of the MC3-II. For the twist angle control, we developed a wafer notch angle monitor. The system monitors the wafer notch image on the platen. And the notch angle variation is calculated by using image processing method. It is also able to adjust the notch angle according to the angle error. For the tilt angle control, we developed a vertical beam profile monitor. The monitor system can detect beam profile of vertical directions with horizontally scanning beam. It also measures beam angles of a tilt direction to a wafer. The system configuration and sample beam data are presented.

The Curious Case of the PDF Converter that Likes Mozart: Dissecting and Mitigating the Privacy Risk of Personal Cloud Apps

Directory of Open Access Journals (Sweden)

Harkous Hamza

2016-10-01

Full Text Available Third party apps that work on top of personal cloud services, such as Google Drive and Drop-box, require access to the user’s data in order to provide some functionality. Through detailed analysis of a hundred popular Google Drive apps from Google’s Chrome store, we discover that the existing permission model is quite often misused: around two-thirds of analyzed apps are over-privileged, i.e., they access more data than is needed for them to function. In this work, we analyze three different permission models that aim to discourage users from installing over-privileged apps. In experiments with 210 real users, we discover that the most successful permission model is our novel ensemble method that we call Far-reaching Insights. Far-reaching Insights inform the users about the data-driven insights that apps can make about them (e.g., their topics of interest, collaboration and activity patterns etc. Thus, they seek to bridge the gap between what third parties can actually know about users and users’ perception of their privacy leakage. The efficacy of Far-reaching Insights in bridging this gap is demonstrated by our results, as Far-reaching Insights prove to be, on average, twice as effective as the current model in discouraging users from installing over-privileged apps. In an effort to promote general privacy awareness, we deployed PrivySeal, a publicly available privacy-focused app store that uses Far-reaching Insights. Based on the knowledge extracted from data of the store’s users (over 115 gigabytes of Google Drive data from 1440 users with 662 installed apps, we also delineate the ecosystem for 3rd party cloud apps from the standpoint of developers and cloud providers. Finally, we present several general recommendations that can guide other future works in the area of privacy for the cloud. To the best of our knowledge, ours is the first work that tackles the privacy risk posed by 3rd party apps on cloud platforms in such depth.

Calcification of MC3T3-E1 cells on titanium and zirconium.

Science.gov (United States)

Umezawa, Takayuki; Chen, Peng; Tsutsumi, Yusuke; Doi, Hisashi; Ashida, Maki; Suzuki, Shoichi; Moriyama, Keiji; Hanawa, Takao

2015-01-01

To confirm similarity of hard tissue compatibility between titanium and zirconium, calcification of MC3T3-E1 cells on titanium and zirconium was evaluated in this study. Mirror-polished titanium (Ti) and zirconium (Zr) disks and zirconium-sputter deposited titanium (Zr/Ti) were employed in this study. The surface of specimens were characterized using scanning electron microscopy and X-ray diffraction. Then, the cellular proliferation, differentiation and calcification of MC3T3-E1 cells on specimens were investigated. The surface of Zr/Ti was much smoother and cleaner than those of Ti and Zr. The proliferation of the cell was the same among three specimens, while the differentiation and calcification on Zr/Ti were faster than those on Ti and Zr. Therefore, Ti and Zr showed the identical hard tissue compatibility according to the evaluation with MC3T3-E1 cells. Sputter deposition may improve cytocompatibility.

Precipitating clouds observed by 1.3-GHz boundary layer radars in equatorial Indonesia

Directory of Open Access Journals (Sweden)

F. Renggono

2001-08-01

Full Text Available Temporal variations of precipitating clouds in equatorial Indonesia have been studied based on observations with 1357.5 MHz boundary layer radars at Serpong (6.4° S, 106.7° E near Jakarta and Bukittinggi (0.2° S, 100.3° E in West Sumatera. We have classified precipitating clouds into four types: stratiform, mixed stratiform-convective, deep convective, and shallow convective clouds, using the Williams et al. (1995 method. Diurnal variations of the occurrence of precipitating clouds at Serpong and Bukittinggi have showed the same characteristics, namely, that the precipitating clouds primarily occur in the afternoon and the peak of the stratiform cloud comes after the peak of the deep convective cloud. The time delay between the peaks of stratiform and deep convective clouds corresponds to the life cycle of the mesoscale convective system. The precipitating clouds which occur in the early morning at Serpong are dominated by stratiform cloud. Concerning seasonal variations of the precipitating clouds, we have found that the occurrence of the stratiform cloud is most frequent in the rainy season, while the occurrence of the deep convective cloud is predominant in the dry season.Key words. Meteorology and atmospheric dynamics (convective processes; precipitation; tropical meteorology

Zen of cloud learning cloud computing by examples on Microsoft Azure

CERN Document Server

Bai, Haishi

2014-01-01

Zen of Cloud: Learning Cloud Computing by Examples on Microsoft Azure provides comprehensive coverage of the essential theories behind cloud computing and the Windows Azure cloud platform. Sharing the author's insights gained while working at Microsoft's headquarters, it presents nearly 70 end-to-end examples with step-by-step guidance on implementing typical cloud-based scenarios.The book is organized into four sections: cloud service fundamentals, cloud solutions, devices and cloud, and system integration and project management. Each chapter contains detailed exercises that provide readers w

Structural Insights into Selective Ligand-Receptor Interactions Leading to Receptor Inactivation Utilizing Selective Melanocortin 3 Receptor Antagonists.

Science.gov (United States)

Cai, Minying; Marelli, Udaya Kiran; Mertz, Blake; Beck, Johannes G; Opperer, Florian; Rechenmacher, Florian; Kessler, Horst; Hruby, Victor J

2017-08-15

Systematic N-methylated derivatives of the melanocortin receptor ligand, SHU9119, lead to multiple binding and functional selectivity toward melanocortin receptors. However, the relationship between N-methylation-induced conformational changes in the peptide backbone and side chains and melanocortin receptor selectivity is still unknown. We conducted comprehensive conformational studies in solution of two selective antagonists of the third isoform of the melanocortin receptor (hMC3R), namely, Ac-Nle-c[Asp-NMe-His 6 -d-Nal(2') 7 -NMe-Arg 8 -Trp 9 -Lys]-NH 2 (15) and Ac-Nle-c[Asp-His 6 -d-Nal(2') 7 -NMe-Arg 8 -NMe-Trp 9 -NMe-Lys]-NH 2 (17). It is known that the pharmacophore (His 6 -DNal 7 -Arg 8 -Trp 9 ) of the SHU-9119 peptides occupies a β II-turn-like region with the turn centered about DNal 7 -Arg 8 . The analogues with hMC3R selectivity showed distinct differences in the spatial arrangement of the Trp 9 side chains. In addition to our NMR studies, we also carried out molecular-level interaction studies of these two peptides at the homology model of hMC3R. Earlier chimeric human melanocortin 3 receptor studies revealed insights regarding the binding and functional sites of hMC3R selectivity. Upon docking of peptides 15 and 17 to the binding pocket of hMC3R, it was revealed that Arg 8 and Trp 9 side chains are involved in a majority of the interactions with the receptor. While Arg 8 forms polar contacts with D154 and D158 of hMC3R, Trp 9 utilizes π-π stacking interactions with F295 and F298, located on the transmembrane domain of hMC3R. It is hypothesized that as the frequency of Trp 9 -hMC3R interactions decrease, antagonistic activity increases. The absence of any interactions of the N-methyl groups with hMC3R suggests that their primary function is to modulate backbone conformations of the ligands.

3D And 4D Cloud Lifecycle Investigations Using Innovative Scanning Radar Analysis Methods. Final report

Energy Technology Data Exchange (ETDEWEB)

Kollias, Pavlos [Stony Brook Univ., NY (United States)

2017-04-23

With the vast upgrades to the ARM program radar measurement capabilities in 2010 and beyond, our ability to probe the 3D structure of clouds and associated precipitation has increased dramatically. This project build on the PI's and co-I's expertisein the analysis of radar observations. The first research thrust aims to document the 3D morphological (as depicted by the radar reflectivity structure) and 3D dynamical (cloud$-$scale eddies) structure of boundary layer clouds. Unraveling the 3D dynamical structure of stratocumulus and shallow cumulus clouds requires decomposition of the environmental wind contribution and particle sedimentation velocity from the observed radial Doppler velocity. The second thrust proposes to unravel the mechanism of cumulus entrainment (location, scales) and its impact on microphysics utilizing radar measurements from the vertically pointing and new scanning radars at the ARM sites. The third research thrust requires the development of a cloud$-$tracking algorithm that monitors the properties of cloud.

A Comparative Study of McDonald’s Wedding Narratives with the Model of Anchoring

Directory of Open Access Journals (Sweden)

Mimi Huang

2016-12-01

Full Text Available Fast-food giant McDonald’s announced in 2010 that they would start hosting wedding ceremonies and receptions for couples who would like to get married in their restaurants in Hong Kong. This paper conducts a study comparing the differing representations of McDonald’s wedding services through a narrative analytical approach. Specifically, this paper examines relevant discourses surrounding the launch of the corporation’s wedding services from the British media (e.g. Daily Mail, the Independent as well as public discourses in Hong Kong (e.g. McDonald’s Hong Kong website, and CNN’s Hong Kong news.  It is found that these narratives have a significant degree of discrepancy in depicting McDonald’s wedding stories. These differences further raise the question of how differing narrative strategies are employed to conceptualise the brand’s emergent wedding narratives in a unique social-cultural environment.  In the discussion of McDonald’s wedding stories, the focus is placed on the cognitive and linguistic aspects of the discourse. An analytical model of “anchoring” will be proposed and applied to investigate the cooperation’s marketing strategies as well as the media’s reaction towards such promotions. It is argued that a narrative can promote or demote a brand’s identity and position through the process of anchoring. It is further argued that anchoring is an important cognitive-psychological strategy in conceptualization and meaning construction. Keywords: narrative inquiry, cognitive narratology, anchors, anchoring, meaning construction

Cloud4Psi: cloud computing for 3D protein structure similarity searching.

Science.gov (United States)

Mrozek, Dariusz; Małysiak-Mrozek, Bożena; Kłapciński, Artur

2014-10-01

Popular methods for 3D protein structure similarity searching, especially those that generate high-quality alignments such as Combinatorial Extension (CE) and Flexible structure Alignment by Chaining Aligned fragment pairs allowing Twists (FATCAT) are still time consuming. As a consequence, performing similarity searching against large repositories of structural data requires increased computational resources that are not always available. Cloud computing provides huge amounts of computational power that can be provisioned on a pay-as-you-go basis. We have developed the cloud-based system that allows scaling of the similarity searching process vertically and horizontally. Cloud4Psi (Cloud for Protein Similarity) was tested in the Microsoft Azure cloud environment and provided good, almost linearly proportional acceleration when scaled out onto many computational units. Cloud4Psi is available as Software as a Service for testing purposes at: http://cloud4psi.cloudapp.net/. For source code and software availability, please visit the Cloud4Psi project home page at http://zti.polsl.pl/dmrozek/science/cloud4psi.htm. © The Author 2014. Published by Oxford University Press.

SU-E-T-490: Independent Three-Dimensional (3D) Dose Verification of VMAT/SBRT Using EPID and Cloud Computing

Energy Technology Data Exchange (ETDEWEB)

Ding, A; Han, B; Bush, K; Wang, L; Xing, L [Stanford University School of Medicine, Stanford, CA (United States)

2015-06-15

Purpose: Dosimetric verification of VMAT/SBRT is currently performed on one or two planes in a phantom with either film or array detectors. A robust and easy-to-use 3D dosimetric tool has been sought since the advent of conformal radiation therapy. Here we present such a strategy for independent 3D VMAT/SBRT plan verification system by a combined use of EPID and cloud-based Monte Carlo (MC) dose calculation. Methods: The 3D dosimetric verification proceeds in two steps. First, the plan was delivered with a high resolution portable EPID mounted on the gantry, and the EPID-captured gantry-angle-resolved VMAT/SBRT field images were converted into fluence by using the EPID pixel response function derived from MC simulations. The fluence was resampled and used as the input for an in-house developed Amazon cloud-based MC software to reconstruct the 3D dose distribution. The accuracy of the developed 3D dosimetric tool was assessed using a Delta4 phantom with various field sizes (square, circular, rectangular, and irregular MLC fields) and different patient cases. The method was applied to validate VMAT/SBRT plans using WFF and FFF photon beams (Varian TrueBeam STX). Results: It was found that the proposed method yielded results consistent with the Delta4 measurements. For points on the two detector planes, a good agreement within 1.5% were found for all the testing fields. Patient VMAT/SBRT plan studies revealed similar level of accuracy: an average γ-index passing rate of 99.2± 0.6% (3mm/3%), 97.4± 2.4% (2mm/2%), and 72.6± 8.4 % ( 1mm/1%). Conclusion: A valuable 3D dosimetric verification strategy has been developed for VMAT/SBRT plan validation. The technique provides a viable solution for a number of intractable dosimetry problems, such as small fields and plans with high dose gradient.

SU-E-T-490: Independent Three-Dimensional (3D) Dose Verification of VMAT/SBRT Using EPID and Cloud Computing

International Nuclear Information System (INIS)

Ding, A; Han, B; Bush, K; Wang, L; Xing, L

2015-01-01

Purpose: Dosimetric verification of VMAT/SBRT is currently performed on one or two planes in a phantom with either film or array detectors. A robust and easy-to-use 3D dosimetric tool has been sought since the advent of conformal radiation therapy. Here we present such a strategy for independent 3D VMAT/SBRT plan verification system by a combined use of EPID and cloud-based Monte Carlo (MC) dose calculation. Methods: The 3D dosimetric verification proceeds in two steps. First, the plan was delivered with a high resolution portable EPID mounted on the gantry, and the EPID-captured gantry-angle-resolved VMAT/SBRT field images were converted into fluence by using the EPID pixel response function derived from MC simulations. The fluence was resampled and used as the input for an in-house developed Amazon cloud-based MC software to reconstruct the 3D dose distribution. The accuracy of the developed 3D dosimetric tool was assessed using a Delta4 phantom with various field sizes (square, circular, rectangular, and irregular MLC fields) and different patient cases. The method was applied to validate VMAT/SBRT plans using WFF and FFF photon beams (Varian TrueBeam STX). Results: It was found that the proposed method yielded results consistent with the Delta4 measurements. For points on the two detector planes, a good agreement within 1.5% were found for all the testing fields. Patient VMAT/SBRT plan studies revealed similar level of accuracy: an average γ-index passing rate of 99.2± 0.6% (3mm/3%), 97.4± 2.4% (2mm/2%), and 72.6± 8.4 % ( 1mm/1%). Conclusion: A valuable 3D dosimetric verification strategy has been developed for VMAT/SBRT plan validation. The technique provides a viable solution for a number of intractable dosimetry problems, such as small fields and plans with high dose gradient

McDonald’s as a Cultural Brand in the Landscape of Attitudes of Polish Customers

Directory of Open Access Journals (Sweden)

Marcin Komańda

2016-01-01

Full Text Available Purpose of the article: The analysis of the attitudes of Polish customers towards McDonald’s based on the identification of opposite social attitudes towards globalisation processes and perception of cultural brands. Methodology/methods: The qualitative analysis of the record of Internet users’ discussion has been conducted. The record of the discussion shall be regarded as an expression of opinion by an incidental group of respondents. For the purposes of the conducted research programmes weftQDA 1.0.1 and QSR NVIVO 10 have been used. Scientific aim: Utilization of postmodern interpretation of the socio-cultural context of running business for purposes of strategic management. Findings: The main differences between the supporters of the attitudes towards McDonald’s were related to two problems. Firstly, the discussion concerns what McDonald’s really is (how its service should be classified. Secondly, the thread of the discourse concerns the quality of McDonald’s offer. Further discussion involved the issues of impact of McDonald’s on the domestic business, and lifestyle of contemporary Poles and their dining habits. Conclusions: The landscape of attitudes of Polish customers towards McDonald’s is the issue of uncertainty in the strategic management within this company. It seems there is a need for paying attention to national cultural features of Poles and different attitudes of contemporary society expressed as a postmodern response to globalisation. Each group of problems mentioned may become an opportunity or a threat for McDonald’s business activity in Poland.

miR-195 inhibited abnormal activation of osteoblast differentiation in MC3T3-E1 cells via targeting RAF-1.

Science.gov (United States)

Chao, Chen; Li, Feng; Tan, Zhiping; Zhang, Weizhi; Yang, Yifeng; Luo, Cheng

2018-01-15

Recent reports have demonstrated that RAF-1 L613V (a mutant of RAF-1) mutant mice show bone deformities similar to Noonan syndrome. It has been suggested that RAF-1 L613V might abnormally activate osteoblast differentiation of MC3T3-E1 cells. To demonstrate that RAF-1 is associated with bone deformity and that RAF-1 L613V dependent bone deformity could be inhibited by microRNA-195 (miR-195), we first investigated the amplifying influence of wild-type RAF-1 (WT) or RAF-1 L613V (L613V) on the viability and differentiation of MC3T3-E1 cells induced by bone morphogenetic protein-2 (BMP-2) via 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, alkaline phosphatase (ALP) and Alizarin Red S (ARS) staining, quantitative real-time polymerase chain reaction (qRT-PCR) and western blot analysis. Subsequently, we investigated the blocking effect and its mechanism of miR-195 for abnormal activation of osteoblast differentiation of MC3T3-E1 cells via targeting RAF-1. RAF-1, especially RAF-1 L613V , abnormally activates osteoblast differentiation of MC3T3-E1 cells induced by BMP-2. Meanwhile, miR-195 could inhibit the cell viability and differentiation of MC3T3-E1 cells. Transfection of miR-195 largely suppressed the L613V-induced viability and osteoblast differentiation of MC3T3-E1 cells and attenuated the accelerative effect of L613V on runt-related transcription factor-2 (Runx2), Osterix (OSX), alkaline phosphatase (ALP), osteocalcin (OCN), and distal-less homeobox 5 (DLX5) osteogenic gene expressions. In addition, miR-195 decreased the expression of RAF-1 mRNA and protein by directly targeting the 3'-untranslated regions (3'-UTR) of RAF-1 mRNA in MC3T3-E1 cells. Our findings indicated that miR-195 inhibited WT and L613V RAF-1 induced hyperactive osteoblast differentiation in MC3T3-E1 cells by targeting RAF-1. miR-195 might be a novel therapeutic agent for the treatment of L613V-induced bone deformity in Noonan syndrome. Copyright © 2017. Published by

Cloud-based opportunities in scientific computing: insights from processing Suomi National Polar-Orbiting Partnership (S-NPP) Direct Broadcast data

Science.gov (United States)

Evans, J. D.; Hao, W.; Chettri, S.

2013-12-01

The cloud is proving to be a uniquely promising platform for scientific computing. Our experience with processing satellite data using Amazon Web Services highlights several opportunities for enhanced performance, flexibility, and cost effectiveness in the cloud relative to traditional computing -- for example: - Direct readout from a polar-orbiting satellite such as the Suomi National Polar-Orbiting Partnership (S-NPP) requires bursts of processing a few times a day, separated by quiet periods when the satellite is out of receiving range. In the cloud, by starting and stopping virtual machines in minutes, we can marshal significant computing resources quickly when needed, but not pay for them when not needed. To take advantage of this capability, we are automating a data-driven approach to the management of cloud computing resources, in which new data availability triggers the creation of new virtual machines (of variable size and processing power) which last only until the processing workflow is complete. - 'Spot instances' are virtual machines that run as long as one's asking price is higher than the provider's variable spot price. Spot instances can greatly reduce the cost of computing -- for software systems that are engineered to withstand unpredictable interruptions in service (as occurs when a spot price exceeds the asking price). We are implementing an approach to workflow management that allows data processing workflows to resume with minimal delays after temporary spot price spikes. This will allow systems to take full advantage of variably-priced 'utility computing.' - Thanks to virtual machine images, we can easily launch multiple, identical machines differentiated only by 'user data' containing individualized instructions (e.g., to fetch particular datasets or to perform certain workflows or algorithms) This is particularly useful when (as is the case with S-NPP data) we need to launch many very similar machines to process an unpredictable number of

CLUSTOM-CLOUD: In-Memory Data Grid-Based Software for Clustering 16S rRNA Sequence Data in the Cloud Environment.

Directory of Open Access Journals (Sweden)

Jeongsu Oh

Full Text Available High-throughput sequencing can produce hundreds of thousands of 16S rRNA sequence reads corresponding to different organisms present in the environmental samples. Typically, analysis of microbial diversity in bioinformatics starts from pre-processing followed by clustering 16S rRNA reads into relatively fewer operational taxonomic units (OTUs. The OTUs are reliable indicators of microbial diversity and greatly accelerate the downstream analysis time. However, existing hierarchical clustering algorithms that are generally more accurate than greedy heuristic algorithms struggle with large sequence datasets. To keep pace with the rapid rise in sequencing data, we present CLUSTOM-CLOUD, which is the first distributed sequence clustering program based on In-Memory Data Grid (IMDG technology-a distributed data structure to store all data in the main memory of multiple computing nodes. The IMDG technology helps CLUSTOM-CLOUD to enhance both its capability of handling larger datasets and its computational scalability better than its ancestor, CLUSTOM, while maintaining high accuracy. Clustering speed of CLUSTOM-CLOUD was evaluated on published 16S rRNA human microbiome sequence datasets using the small laboratory cluster (10 nodes and under the Amazon EC2 cloud-computing environments. Under the laboratory environment, it required only ~3 hours to process dataset of size 200 K reads regardless of the complexity of the human microbiome data. In turn, one million reads were processed in approximately 20, 14, and 11 hours when utilizing 20, 30, and 40 nodes on the Amazon EC2 cloud-computing environment. The running time evaluation indicates that CLUSTOM-CLOUD can handle much larger sequence datasets than CLUSTOM and is also a scalable distributed processing system. The comparative accuracy test using 16S rRNA pyrosequences of a mock community shows that CLUSTOM-CLOUD achieves higher accuracy than DOTUR, mothur, ESPRIT-Tree, UCLUST and Swarm. CLUSTOM-CLOUD

CLUSTOM-CLOUD: In-Memory Data Grid-Based Software for Clustering 16S rRNA Sequence Data in the Cloud Environment.

Science.gov (United States)

Oh, Jeongsu; Choi, Chi-Hwan; Park, Min-Kyu; Kim, Byung Kwon; Hwang, Kyuin; Lee, Sang-Heon; Hong, Soon Gyu; Nasir, Arshan; Cho, Wan-Sup; Kim, Kyung Mo

2016-01-01

High-throughput sequencing can produce hundreds of thousands of 16S rRNA sequence reads corresponding to different organisms present in the environmental samples. Typically, analysis of microbial diversity in bioinformatics starts from pre-processing followed by clustering 16S rRNA reads into relatively fewer operational taxonomic units (OTUs). The OTUs are reliable indicators of microbial diversity and greatly accelerate the downstream analysis time. However, existing hierarchical clustering algorithms that are generally more accurate than greedy heuristic algorithms struggle with large sequence datasets. To keep pace with the rapid rise in sequencing data, we present CLUSTOM-CLOUD, which is the first distributed sequence clustering program based on In-Memory Data Grid (IMDG) technology-a distributed data structure to store all data in the main memory of multiple computing nodes. The IMDG technology helps CLUSTOM-CLOUD to enhance both its capability of handling larger datasets and its computational scalability better than its ancestor, CLUSTOM, while maintaining high accuracy. Clustering speed of CLUSTOM-CLOUD was evaluated on published 16S rRNA human microbiome sequence datasets using the small laboratory cluster (10 nodes) and under the Amazon EC2 cloud-computing environments. Under the laboratory environment, it required only ~3 hours to process dataset of size 200 K reads regardless of the complexity of the human microbiome data. In turn, one million reads were processed in approximately 20, 14, and 11 hours when utilizing 20, 30, and 40 nodes on the Amazon EC2 cloud-computing environment. The running time evaluation indicates that CLUSTOM-CLOUD can handle much larger sequence datasets than CLUSTOM and is also a scalable distributed processing system. The comparative accuracy test using 16S rRNA pyrosequences of a mock community shows that CLUSTOM-CLOUD achieves higher accuracy than DOTUR, mothur, ESPRIT-Tree, UCLUST and Swarm. CLUSTOM-CLOUD is written in JAVA

CLUSTOM-CLOUD: In-Memory Data Grid-Based Software for Clustering 16S rRNA Sequence Data in the Cloud Environment

Science.gov (United States)

Park, Min-Kyu; Kim, Byung Kwon; Hwang, Kyuin; Lee, Sang-Heon; Hong, Soon Gyu; Nasir, Arshan; Cho, Wan-Sup; Kim, Kyung Mo

2016-01-01

High-throughput sequencing can produce hundreds of thousands of 16S rRNA sequence reads corresponding to different organisms present in the environmental samples. Typically, analysis of microbial diversity in bioinformatics starts from pre-processing followed by clustering 16S rRNA reads into relatively fewer operational taxonomic units (OTUs). The OTUs are reliable indicators of microbial diversity and greatly accelerate the downstream analysis time. However, existing hierarchical clustering algorithms that are generally more accurate than greedy heuristic algorithms struggle with large sequence datasets. To keep pace with the rapid rise in sequencing data, we present CLUSTOM-CLOUD, which is the first distributed sequence clustering program based on In-Memory Data Grid (IMDG) technology–a distributed data structure to store all data in the main memory of multiple computing nodes. The IMDG technology helps CLUSTOM-CLOUD to enhance both its capability of handling larger datasets and its computational scalability better than its ancestor, CLUSTOM, while maintaining high accuracy. Clustering speed of CLUSTOM-CLOUD was evaluated on published 16S rRNA human microbiome sequence datasets using the small laboratory cluster (10 nodes) and under the Amazon EC2 cloud-computing environments. Under the laboratory environment, it required only ~3 hours to process dataset of size 200 K reads regardless of the complexity of the human microbiome data. In turn, one million reads were processed in approximately 20, 14, and 11 hours when utilizing 20, 30, and 40 nodes on the Amazon EC2 cloud-computing environment. The running time evaluation indicates that CLUSTOM-CLOUD can handle much larger sequence datasets than CLUSTOM and is also a scalable distributed processing system. The comparative accuracy test using 16S rRNA pyrosequences of a mock community shows that CLUSTOM-CLOUD achieves higher accuracy than DOTUR, mothur, ESPRIT-Tree, UCLUST and Swarm. CLUSTOM-CLOUD is written in

3D Cloud Radiative Effects on Polarized Reflectances

Science.gov (United States)

Cornet, C.; Matar, C.; C-Labonnote, L.; Szczap, F.; Waquet, F.; Parol, F.; Riedi, J.

2017-12-01

As recognized in the last IPCC report, clouds have a major importance in the climate budget and need to be better characterized. Remote sensing observations are a way to obtain either global observations of cloud from satellites or a very fine description of clouds from airborne measurements. An increasing numbers of radiometers plan to measure polarized reflectances in addition to total reflectances, since this information is very helpful to obtain aerosol or cloud properties. In a near future, for example, the Multi-viewing, Multi-channel, Multi-polarization Imager (3MI) will be part the EPS-SG Eumetsat-ESA mission. It will achieve multi-angular polarimetric measurements from visible to shortwave infrared wavelengths. An airborne prototype, OSIRIS (Observing System Including Polarization in the Solar Infrared Spectrum), is also presently developed at the Laboratoire d'Optique Atmospherique and had already participated to several measurements campaigns. In order to analyze suitably the measured signal, it it necessary to have realistic and accurate models able to simulate polarized reflectances. The 3DCLOUD model (Szczap et al., 2014) was used to generate three-dimensional synthetic cloud and the 3D radiative transfer model, 3DMCPOL (Cornet et al., 2010) to compute realistic polarized reflectances. From these simulations, we investigate the effects of 3D cloud structures and heterogeneity on the polarized angular signature often used to retrieve cloud or aerosol properties. We show that 3D effects are weak for flat clouds but become quite significant for fractional clouds above ocean. The 3D effects are quite different according to the observation scale. For the airborne scale (few tens of meter), solar illumination effects can lead to polarized cloud reflectance values higher than the saturation limit predicted by the homogeneous cloud assumption. In the cloud gaps, corresponding to shadowed areas of the total reflectances, polarized signal can also be enhanced

Osteogenic gene expression of murine osteoblastic (MC3T3-E1) cells under cyclic tension

International Nuclear Information System (INIS)

Kao, C T; Chen, C C; Cheong, U-I; Liu, S L; Huang, T H

2014-01-01

Low-level laser therapy (LLLT) can promote cell proliferation. The remodeling ability of the tension side of orthodontic teeth affects post-orthodontic stability. The purpose of the present study was to investigate the osteogenic effects of LLLT on osteoblast-like cells treated with a simulated tension system that provides a mechanical tension regimen. Murine osteoblastic (MC3T3-E1) cells were cultured in a Flexcell strain unit with programmed loads of 12% elongation at a frequency of 0.5 Hz for 24 and 48 h. The cultured cells were treated with a low-level diode laser using powers of 5 J and 10 J. The proliferation of MC3T3-E1 cells was determined using the Alamar Blue assay. The expression of osteogenic genes (type I collagen (Col-1), osteopontin (OPN), osteocalcin (OC), osteoprotegerin (OPG), receptor activator of nuclear factor kappa B ligand (RANKL), bone morphologic protein (BMP-2), and bone morphologic protein (BMP-4)) in MC3T3-E1 cells was analyzed using reverse transcription polymerase chain reaction (RT-PCR). The data were analyzed using one-way analysis of variance. The proliferation rate of tension-cultured MC3T3-E1 cells under 5 J and 10 J LLLT increased compared with that of the control group (p < 0.05). Prominent mineralization of the MC3T3-E1 cells was visible using a von Kossa stain in the 5 J LLLT group. Osteogenic genes (Col-1, OC, OPG and BMP-2) were significantly expressed in the MC3T3-E1 cells treated with 5 J and 10 J LLLT (p < 0.05). LLLT in tension-cultured MC3T3-E1 cells showed synergistic osteogenic effects, including increases in cell proliferation and Col-1, OPN, OC, OPG and BMP-2 gene expression. LLLT might be beneficial for bone remodeling on the tension side of orthodontics. (paper)

Mysteries of Mind and Matter in the Perspective of Colin McGinn’s Philosophy

Directory of Open Access Journals (Sweden)

Dmytro Sepetyi

2016-02-01

Full Text Available The paper discusses the approach to the mind-body problem that was developed by Colin McGinn and is known as “mysterianism”. The basic thesis of this approach, which McGinn opposes to both materialism and dualism, is that consciousness and its relationship to physical reality is an inscrutable mystery that cannot be get over in principle, because of insurmountable, constitutive limitations of human mind. In this paper, the critical analysis of McGinn’s approach is given. It is pointed out that McGinn’s thesis of the inscrutablility of the mind-body relationship is based on the ungrounded idea that a mediating substance is necessary. An argument is made that the mind-body relationship is better understood as interaction that is mediated only by natural psychophysical laws. McGinn’s hypothesis of the origin of physical space in a non-spatial reality that has the same nature as consciousness is explained in the context of different interpretations of the Big Bang theo- ry. It is argued that McGinn’s hypothesis does not provide a solution to the problem of the origin of human consciousness, because consciousness belongs to mental individuals whose emergence is just as unexplainable by the hypothesis of non-spatial reality as it is by physical processes.

Defining generic architecture for Cloud IaaS provisioning model

NARCIS (Netherlands)

Demchenko, Y.; de Laat, C.; Mavrin, A.; Leymann, F.; Ivanov, I.; van Sinderen, M.; Shishkov, B.

2011-01-01

Infrastructure as a Service (IaaS) is one of the provisioning models for Clouds as defined in the NIST Clouds definition. Although widely used, current IaaS implementations and solutions doesn’t have common and well defined architecture model. The paper attempts to define a generic architecture for

Divalent Metal Ions Induced Osteogenic Differentiation of MC3T3E1

Science.gov (United States)

Wang, Guoshou; Su, Wenta; Chen, Pohung; Huang, Teyang

2017-12-01

Biomaterial scaffolds blended with biochemical signal molecules with adequate osteoinductive and osteoconductive properties have attracted significant interest in bone tissue engineering regeneration. The divalent metal ions can gradually release from the scaffold into the culture medium and then induced osteoblastic differentiation of MC3T3E1. These MC3T3E1 cells expressed high activity of alkaline phosphatase, bone-related gene expression of collagen type I, Runx2, osteopontin, osteocalcin, and significantly enhanced deposited minerals on scaffold after 21 days of culture. This experiment provided a useful inducer for osteogenic differentiation in bone repair.

Cloud chemistry in eastern China: Observations from Mt. Tai

Science.gov (United States)

Collett, J. L.; Shen, X.; Lee, T.; Wang, X.; Li, Y.; Wang, W.; Wang, T.

2010-07-01

Until recently, studies of fog and cloud chemistry in China have been rare - even though the fate of China’s large sulfur dioxide emissions depends, in part, on the ability of regional clouds to support rapid aqueous oxidation to sulfate. Sulfur dioxide oxidized in regional clouds is more likely to be removed by wet deposition while sulfur dioxide that undergoes slower gas phase oxidation is expected to survive longer in the atmosphere and be transported over a much broader spatial scale. Two 2008 field campaigns conducted at Mt. Tai, an isolated peak on the NE China plain, provide insight into the chemical composition of regional clouds and the importance of various aqueous phase sulfur oxidation pathways. Single and two-stage Caltech Active Strand Cloudwater Collectors were used to collect bulk and drop size-resolved samples of cloudwater. Collected cloudwater was analyzed for key species that influence in-cloud sulfate production, including pH, S(IV), H2O2, Fe and Mn. Other major cloud solutes, including inorganic ions, total organic carbon (TOC), formaldehyde, and organic acids were also analyzed, as were gas phase concentrations of SO2, O3, and H2O2. A wide range of cloud pH was observed, from below 3 to above 6. High concentrations of cloudwater sulfate were consistent with abundant sulfur dioxide emissions in the region. Sampled clouds were also found to contain high concentrations of ammonium, nitrate, and organic carbon. Peak TOC concentrations reached approximately 200 ppmC, among the highest concentrations ever measured in cloudwater. Hydrogen peroxide was found to be the dominant aqueous phase S(IV) oxidant when cloud pH was less than approximately 5.4. Despite its fast reaction with sulfur dioxide in cloud droplets, high concentrations of residual hydrogen peroxide were measured in some clouds implying a substantial additional capacity for sulfate production. Ozone was found to be an important S(IV) oxidant when cloud pH was high. Oxidation of S

SULFATE PRODUCTION IN CLOUDS IN EASTERN CHINA: OBSERVATIONS FROM MT. TAI

Science.gov (United States)

Collett, J. L.; Shen, X.; Lee, T.; Wang, X.; Wang, W.; Wang, T.

2009-12-01

The fate of China’s sulfur dioxide emissions depends, in part, on the ability of regional clouds to support rapid aqueous oxidation of these emissions to sulfate. Sulfur dioxide oxidized in regional clouds is more likely to be removed by wet deposition while sulfur dioxide that undergoes slower gas phase oxidation is expected to survive longer in the atmosphere and exert a radiative forcing impact over a broader spatial scale. Two 2008 field campaigns conducted at Mt. Tai, an isolated peak on the NE China plain, provide insight into the importance of various aqueous phase sulfur oxidation pathways in the region. Single and two-stage cloudwater collectors were used to collect bulk and drop size-resolved samples of cloudwater. Collected cloudwater was analyzed for key species that influence in-cloud sulfate production, including pH, S(IV), H2O2, Fe and Mn. Other major cloud solutes, including inorganic ions, total organic carbon, formaldehyde, and organic acids were also analyzed, as were gas phase concentrations of SO2, O3, and H2O2. A wide range of cloud pH was observed, from below 3 to above 6. High concentrations of cloudwater sulfate were consistent with abundant sulfur dioxide emissions in the region. Despite its fast aqueous reaction with sulfur dioxide, high concentrations of residual hydrogen peroxide were measured in some clouds implying a substantial capacity for additional sulfate production. Ozone was found to be an important S(IV) oxidant in some periods when cloud pH was high. This presentation will examine the importance of different oxidants (H2O2, O3, and O2 catalyzed by trace metals) for sulfur oxidation and the overall capacity of regional clouds to support rapid aqueous phase sulfate production.

CloudSat-Constrained Cloud Ice Water Path and Cloud Top Height Retrievals from MHS 157 and 183.3 GHz Radiances

Science.gov (United States)

Gong, J.; Wu, D. L.

2014-01-01

Ice water path (IWP) and cloud top height (ht) are two of the key variables in determining cloud radiative and thermodynamical properties in climate models. Large uncertainty remains among IWP measurements from satellite sensors, in large part due to the assumptions made for cloud microphysics in these retrievals. In this study, we develop a fast algorithm to retrieve IWP from the 157, 183.3+/-3 and 190.3 GHz radiances of the Microwave Humidity Sounder (MHS) such that the MHS cloud ice retrieval is consistent with CloudSat IWP measurements. This retrieval is obtained by constraining the empirical forward models between collocated and coincident measurements of CloudSat IWP and MHS cloud-induced radiance depression (Tcir) at these channels. The empirical forward model is represented by a lookup table (LUT) of Tcir-IWP relationships as a function of ht and the frequency channel.With ht simultaneously retrieved, the IWP is found to be more accurate. The useful range of the MHS IWP retrieval is between 0.5 and 10 kg/sq m, and agrees well with CloudSat in terms of the normalized probability density function (PDF). Compared to the empirical model, current operational radiative transfer models (RTMs) still have significant uncertainties in characterizing the observed Tcir-IWP relationships. Therefore, the empirical LUT method developed here remains an effective approach to retrieving ice cloud properties from the MHS-like microwave channels.

Time and situatedness Merleau-Ponty,s Response to McTaggart,s Paradox

Directory of Open Access Journals (Sweden)

Claudio Javier Cormick

2014-12-01

Full Text Available The article seeks to establish a relationship that has not yet been explored satisfactorily between Merleau-Ponty᾿s phenomenology of time and a central issue of analytical “theory of time”: McTaggart᾿s paradox. By clarifying the authentic meaning of Merleau-Ponty᾿s “subjectivism” regarding time, against Priest᾿s interpretation (1998, the article points out a convergence between the phenomenological approach and Michael Dummett᾿s theses developed in response to the abovementioned paradox. A “situational” solution to the paradox is attempted on the basis of Dummett᾿s ideas and Bimbenet᾿s interpretation of Merleau-Ponty᾿s “perspectivism”.

MC-GenomeKey: a multicloud system for the detection and annotation of genomic variants.

Science.gov (United States)

Elshazly, Hatem; Souilmi, Yassine; Tonellato, Peter J; Wall, Dennis P; Abouelhoda, Mohamed

2017-01-20

Next Generation Genome sequencing techniques became affordable for massive sequencing efforts devoted to clinical characterization of human diseases. However, the cost of providing cloud-based data analysis of the mounting datasets remains a concerning bottleneck for providing cost-effective clinical services. To address this computational problem, it is important to optimize the variant analysis workflow and the used analysis tools to reduce the overall computational processing time, and concomitantly reduce the processing cost. Furthermore, it is important to capitalize on the use of the recent development in the cloud computing market, which have witnessed more providers competing in terms of products and prices. In this paper, we present a new package called MC-GenomeKey (Multi-Cloud GenomeKey) that efficiently executes the variant analysis workflow for detecting and annotating mutations using cloud resources from different commercial cloud providers. Our package supports Amazon, Google, and Azure clouds, as well as, any other cloud platform based on OpenStack. Our package allows different scenarios of execution with different levels of sophistication, up to the one where a workflow can be executed using a cluster whose nodes come from different clouds. MC-GenomeKey also supports scenarios to exploit the spot instance model of Amazon in combination with the use of other cloud platforms to provide significant cost reduction. To the best of our knowledge, this is the first solution that optimizes the execution of the workflow using computational resources from different cloud providers. MC-GenomeKey provides an efficient multicloud based solution to detect and annotate mutations. The package can run in different commercial cloud platforms, which enables the user to seize the best offers. The package also provides a reliable means to make use of the low-cost spot instance model of Amazon, as it provides an efficient solution to the sudden termination of spot

A QoS aware services mashup model for cloud computing applications

Directory of Open Access Journals (Sweden)

Yee Ming Chen

2012-12-01

Full Text Available Purpose: With the popularity of cloud computing, cloud services have become to be application programming platform where users can create new applications mashup(composing the functionality offered byothers.By composing of distributed, cloud services dynamicallyto provide more complex tasks, services mashup provides an attractive way for building large-scale Internetapplications.Oneof the challenging issues of cloud services mashup is how to find service paths to route the service instances provider through whilemeeting the applications’ resource requirements so that the QoS constraints are satisfied. However, QoS aware service routing problem istypically NP-hard.The purpose of this paper is to propose a QoS Aware Services Mashup(QASM model to solve this problem more effectively.Design/methodology/approach: In this paper, we focus on the QoS aware services selection problem in cloud services mashup, for example, given the user service composition requirements and their QoS constraint descriptions, how to select the required serviceinstances and route the data flows through these instances so that the QoS requirements are satisfied. We design a heuristic algorithm to find service paths to route the data flows through whilemeeting the applications’ resource requirements and specific QoS constraints.Findings: This study propose a QoS Aware Services Mashup(QASM model to solve this problem more effectively. Simulations show that QASM can achieve desired QoS assurances as well as load balancing in cloud services environment.Originality/value: This paperpresent a QASM model for providing high performance distributedapplications in the cloud computing systems.

Hansen′s disease with McCune-Albright syndrome

Directory of Open Access Journals (Sweden)

KVS Hari Kumar

2012-01-01

Full Text Available McCune-Albright syndrome (MAS comprises a triad of fibrous dysplasia of bone, cafι-au-lait macule, and endocrinopathy. The disease is due to activating mutation of G protein-coupled receptor leading to hyperfunction of glands. Hansen′s disease is caused by infection with Mycobacterium leprae and is seen with underlying immunosuppressed conditions in genetically predisposed individuals. We recently encountered a patient with Hansen′s disease along with underlying MAS and report the same in this report.

Cuscuta chinensis seeds water extraction protecting murine osteoblastic MC3T3-E1 cells against tertiary butyl hydroperoxide induced injury.

Science.gov (United States)

Gao, Jian-mei; Li, Ran; Zhang, Lei; Jia, Li-long; Ying, Xi-xiang; Dou, De-qiang; Li, Jian-chun; Li, Hai-bo

2013-07-09

Cuscuta chinensis (C. chinensis) is a well-known traditional Chinese herb that has been used to treat heart disease, diabetes, liver injury, cancer, and aging. Murine osteoblastic MC3T3-E1 cells were treated with various concentrations of C. chinensis water extraction at different time intervals. The antioxidant effect of C. chinensis on MC3T3-E1 cells was evaluated using MTT and TUNEL assays. The effect of C. chinensis on cell cycle was analyzed by flow cytometry with propidium iodide. Lipid peroxidation was measured by the HPLC method. The cellular redox status was determined from the reduced glutathione to oxidized glutathione ratio (GSH/GSSG) and the enzymes involved in glutathione metabolism, including glutathione reductase (GR), Glutathione S-transferase (GST), and Glucose-6-phosphate dehydrogenase (G6PD). The changes in relative mitochondrial transmembrane potential (ΔΨm) in the MC3T3-E1 cells were analyzed with rhodamine 123 staining. Western blot analysis was used to evaluate the levels of cytochrome c (cyto c), Bax, Bcl-2, caspase 3, Sirt3, and IDH2 expressions. The C. chinensis water extraction protects tertiary butyl hydroperoxide (TBHP)-treated MC3T3-E1 cells from death in a dose-dependent manner. C. chinensis treatment significantly inhibited the reactive oxygen species (ROS) generation, malondialdehyde (MDA) production, and increased the activity of superoxide dismutase (SOD), GR, GST, and G6PD. The release of cyto c from mitochondria was reduced by C. chinensis, which increased the expression of antiapoptotic IDH2, Sirt3, and Bcl-2 and decreased the expression of Bax, cyto c, and caspase 3. C. chinensis modulated the oxidative stress-induced apoptosis in MC3T3-E1 cells, probably due to its antioxidant activity and functioning via mitochondria-dependent pathways. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

McMYB10 regulates coloration via activating McF3'H and later structural genes in ever-red leaf crabapple.

Science.gov (United States)

Tian, Ji; Peng, Zhen; Zhang, Jie; Song, Tingting; Wan, Huihua; Zhang, Meiling; Yao, Yuncong

2015-09-01

The ever-red leaf trait, which is important for breeding ornamental and higher anthocyanin plants, rarely appears in Malus families, but little is known about the regulation of anthocyanin biosynthesis involved in the red leaves. In our study, HPLC analysis showed that the anthocyanin concentration in ever-red leaves, especially cyanidin, was significantly higher than that in evergreen leaves. The transcript level of McMYB10 was significantly correlated with anthocyanin synthesis between the 'Royalty' and evergreen leaf 'Flame' cultivars during leaf development. We also found the ever-red leaf colour cultivar 'Royalty' contained the known R6 : McMYB10 sequence, but was not in the evergreen leaf colour cultivar 'Flame', which have been reported in apple fruit. The distinction in promoter region maybe is the main reason why higher expression level of McMYB10 in red foliage crabapple cultivar. Furthermore, McMYB10 promoted anthocyanin biosynthesis in crabapple leaves and callus at low temperatures and during long-day treatments. Both heterologous expression in tobacco (Nicotiana tabacum) and Arabidopsis pap1 mutant, and homologous expression in crabapple and apple suggested that McMYB10 could promote anthocyanins synthesis and enhanced anthocyanin accumulation in plants. Interestingly, electrophoretic mobility shift assays, coupled with yeast one-hybrid analysis, revealed that McMYB10 positively regulates McF3'H via directly binding to AACCTAAC and TATCCAACC motifs in the promoter. To sum up, our results demonstrated that McMYB10 plays an important role in ever-red leaf coloration, by positively regulating McF3'H in crabapple. Therefore, our work provides new perspectives for ornamental fruit tree breeding. © 2015 Society for Experimental Biology, Association of Applied Biologists and John Wiley & Sons Ltd.

Scintigraphic demonstration of a iatrogenic rhabdomyolysis im McArdle's syndrome

Energy Technology Data Exchange (ETDEWEB)

Neumann, P.; Rumpf, K.W.; Kaiser, H.; Meinck, H.M.; Goebel, H.H.; Schicha, H.; Emrich, D.

1982-02-01

In a patient with late onset McArdle's disease local rhabdomyolysis and massive myoglobinuria were provoked by a routine diagnostic procedure - the forearm ischemic work test. Localisation and extent of rhabdomyolysis could be demonstrated by a conventional whole-body scanning technique using sup(99m)Tc methylenediphosphonate as a tracer. It is concluded that the forearm ischemic work test is not without risk in patients with McArdle's disease, and care should be taken to prevent myoglobinuric renal failure in these patients.

DDoS Attacks in Cloud Computing: Issues, Taxonomy, and Future Directions

OpenAIRE

Somani, Gaurav; Gaur, Manoj Singh; Sanghi, Dheeraj; Conti, Mauro; Buyya, Rajkumar

2015-01-01

Security issues related to the cloud computing are relevant to various stakeholders for an informed cloud adoption decision. Apart from data breaches, the cyber security research community is revisiting the attack space for cloud-specific solutions as these issues affect budget, resource management, and service quality. Distributed Denial of Service (DDoS) attack is one such serious attack in the cloud space. In this paper, we present developments related to DDoS attack mitigation solutions i...

What would McLuhan say about the smartphone? : applying McLuhan’s tetrad to the smartphone

NARCIS (Netherlands)

Isabelle Adam

2016-01-01

In this essay, the smartphone as a new technology and medium is analysed with regards to its effects on individuals and society. McLuhan’s tetrad serves as a framework for analysis, consisting of a set of four effects to examine media in their historical context and present environment as well as

Testing S3 API for OBS, and Federated AAI for HNSciCloud

CERN Document Server

Pintjuk, Daniil

2016-01-01

During my time at CERN join the HNSciCloud PCP project. A Pre-commercial Procurmet tender to develop a cloud platform to support high performance computing and big data capabilities for scientific research.

GREEN BANK TELESCOPE OBSERVATIONS OF THE NH3 (3, 3) AND (6, 6) TRANSITIONS TOWARD SAGITTARIUS A MOLECULAR CLOUDS

International Nuclear Information System (INIS)

Minh, Young Chol; Liu, Hauyu Baobab; Ho, Paul T. P.; Hsieh, Pei-Ying; Su, Yu-Nung; Kim, Sungsoo S.; Wright, Melvyn

2013-01-01

Ammonia (3, 3) and (6, 6) transitions have been observed using the Green Bank Telescope toward the Sgr A region. The gas is mainly concentrated in 50 km s –1 and 20 km s –1 clouds located in a plane inclined to the galactic plane. These 'main' clouds appear to be virialized and influenced by the expansion of the supernova remnant Sgr A East. The observed emission shows very complicated features in the morphology and velocity structure. Gaussian multi-component fittings of the observed spectra revealed that various 'streaming' gas components exist all over the observed region. These components include those previously known as 'streamers' and 'ridges', but most of these components appear not to be directly connected to the major gas condensations (the 50 km s –1 and 20 km s –1 clouds). They are apparently located out of the galactic plane, and they may have a different origin than the major gas condensations. Some of the streaming components are expected to be sources that feed the circumnuclear disk of our Galactic center directly and episodically. They may also evolve differently than major gas condensations under the influence of the activities of the Galactic center

COMPARATIVE ANALYSIS OF 3D POINT CLOUDS GENERATED FROM A FREEWARE AND TERRESTRIAL LASER SCANNER

Directory of Open Access Journals (Sweden)

K. R. Dayal

2017-07-01

Full Text Available In the recent past, several heritage structures have faced destruction due to both human-made incidents and natural calamities that have caused a great loss to the human race regarding its cultural achievements. In this context, the importance of documenting such structures to create a substantial database cannot be emphasised enough. The Clock Tower of Dehradun, India is one such structure. There is a lack of sufficient information in the digital domain, which justified the need to carry out this study. Thus, an attempt has been made to gauge the possibilities of using open source 3D tools such as VSfM to quickly and easily obtain point clouds of an object and assess its quality. The photographs were collected using consumer grade cameras with reasonable effort to ensure overlap. The sparse reconstruction and dense reconstruction were carried out to generate a 3D point cloud model of the tower. A terrestrial laser scanner (TLS was also used to obtain a point cloud of the tower. The point clouds obtained from the two methods were analyzed to understand the quality of the information present; TLS acquired point cloud being a benchmark to assess the VSfM point cloud. They were compared to analyze the point density and subjected to a plane-fitting test for sample flat portions on the structure. The plane-fitting test revealed the planarity of the point clouds. A Gauss distribution fit yielded a standard deviation of 0.002 and 0.01 for TLS and VSfM, respectively. For more insight, comparisons with Agisoft Photoscan results were also made.

McDowell’s New Conceptualism and the Difference between Chickens, Colours and Cardinals

DEFF Research Database (Denmark)

Gersel, Johan Peter; Thybo Jensen, Rasmus; Thaning, Morten Sørensen

2017-01-01

McDowell recently renounced the assumption that the content of any knowledgeable, perceptual judgement must be included in the content of the knowledge grounding experience. We argue that McDowell’s introduction of a new category of non-inferential, perceptual knowledge is incompatible with the m...

Suomen McDonald’s-ketjun ravintolahenkilöstön sisäisen koulutuspolun mallintaminen

OpenAIRE

Baikov, Anne; Malaska, Mari; Räty, Isa

2015-01-01

Tämän opinnäytetyön tavoitteena on mallintaa Suomen McDonald’s-ketjun ravintolahenkilöstön sisäinen koulutuspolku. Koulutuspolku sisältää ravintolahenkilöstön koulutusohjelmat ravintolatyöntekijästä ravintolapäällikköön asti. Mallintamisprosessin lopputuote on produkti, Koulutuspolku-opas, joka avaa Suomen McDonald’s-ketjun eri koulutusohjelmien sisältöä sekä eri työtehtävissä edellytettävää osaamista. Produktin avainkohderyhmänä on Suomen McDonald’s-ketjun ravintolajohto. Työn toimeksian...

Probabilistic programming in Python using PyMC3

Directory of Open Access Journals (Sweden)

John Salvatier

2016-04-01

Full Text Available Probabilistic programming allows for automatic Bayesian inference on user-defined probabilistic models. Recent advances in Markov chain Monte Carlo (MCMC sampling allow inference on increasingly complex models. This class of MCMC, known as Hamiltonian Monte Carlo, requires gradient information which is often not readily available. PyMC3 is a new open source probabilistic programming framework written in Python that uses Theano to compute gradients via automatic differentiation as well as compile probabilistic programs on-the-fly to C for increased speed. Contrary to other probabilistic programming languages, PyMC3 allows model specification directly in Python code. The lack of a domain specific language allows for great flexibility and direct interaction with the model. This paper is a tutorial-style introduction to this software package.

Importance of including ammonium sulfate ((NH42SO4 aerosols for ice cloud parameterization in GCMs

Directory of Open Access Journals (Sweden)

P. S. Bhattacharjee

2010-02-01

Full Text Available A common deficiency of many cloud-physics parameterizations including the NASA's microphysics of clouds with aerosol-cloud interactions (hereafter called McRAS-AC is that they simulate lesser (larger than the observed ice cloud particle number (size. A single column model (SCM of McRAS-AC physics of the GEOS4 Global Circulation Model (GCM together with an adiabatic parcel model (APM for ice-cloud nucleation (IN of aerosols were used to systematically examine the influence of introducing ammonium sulfate (NH42SO4 aerosols in McRAS-AC and its influence on the optical properties of both liquid and ice clouds. First an (NH42SO4 parameterization was included in the APM to assess its effect on clouds vis-à-vis that of the other aerosols. Subsequently, several evaluation tests were conducted over the ARM Southern Great Plain (SGP and thirteen other locations (sorted into pristine and polluted conditions distributed over marine and continental sites with the SCM. The statistics of the simulated cloud climatology were evaluated against the available ground and satellite data. The results showed that inclusion of (NH42SO4 into McRAS-AC of the SCM made a remarkable improvement in the simulated effective radius of ice cloud particulates. However, the corresponding ice-cloud optical thickness increased even more than the observed. This can be caused by lack of horizontal cloud advection not performed in the SCM. Adjusting the other tunable parameters such as precipitation efficiency can mitigate this deficiency. Inclusion of ice cloud particle splintering invoked empirically further reduced simulation biases. Overall, these changes make a substantial improvement in simulated cloud optical properties and cloud distribution particularly over the Intertropical Convergence Zone (ITCZ in the GCM.

A Comparative Study of McDonald’s Wedding Narratives with the Model of Anchoring

OpenAIRE

Mimi Huang

2016-01-01

Fast-food giant McDonald’s announced in 2010 that they would start hosting wedding ceremonies and receptions for couples who would like to get married in their restaurants in Hong Kong. This paper conducts a study comparing the differing representations of McDonald’s wedding services through a narrative analytical approach. Specifically, this paper examines relevant discourses surrounding the launch of the corporation’s wedding services from the British media (e.g. Daily Mail, the Independent...

GREEN BANK TELESCOPE OBSERVATIONS OF THE NH{sub 3} (3, 3) AND (6, 6) TRANSITIONS TOWARD SAGITTARIUS A MOLECULAR CLOUDS

Energy Technology Data Exchange (ETDEWEB)

Minh, Young Chol [Korea Astronomy and Space Science Institute, Daeduk-daero 776, Yuseong, Daejeon 305-348 (Korea, Republic of); Liu, Hauyu Baobab; Ho, Paul T. P.; Hsieh, Pei-Ying; Su, Yu-Nung [Institute of Astronomy and Astrophysics, Academia Sinica, P.O. Box 23-141, Taipei 10617, Taiwan (China); Kim, Sungsoo S. [Department of Astronomy and Space Science, Kyung Hee University, Yongin, Kyungki-do 446-701 (Korea, Republic of); Wright, Melvyn [Radio Astronomy Laboratory, University of California, Berkeley, 601 Campbell Hall, Berkeley, CA 94720 (United States)

2013-08-10

Ammonia (3, 3) and (6, 6) transitions have been observed using the Green Bank Telescope toward the Sgr A region. The gas is mainly concentrated in 50 km s{sup -1} and 20 km s{sup -1} clouds located in a plane inclined to the galactic plane. These 'main' clouds appear to be virialized and influenced by the expansion of the supernova remnant Sgr A East. The observed emission shows very complicated features in the morphology and velocity structure. Gaussian multi-component fittings of the observed spectra revealed that various 'streaming' gas components exist all over the observed region. These components include those previously known as 'streamers' and 'ridges', but most of these components appear not to be directly connected to the major gas condensations (the 50 km s{sup -1} and 20 km s{sup -1} clouds). They are apparently located out of the galactic plane, and they may have a different origin than the major gas condensations. Some of the streaming components are expected to be sources that feed the circumnuclear disk of our Galactic center directly and episodically. They may also evolve differently than major gas condensations under the influence of the activities of the Galactic center.

Ginsenoside Re Promotes Osteoblast Differentiation in Mouse Osteoblast Precursor MC3T3-E1 Cells and a Zebrafish Model

Directory of Open Access Journals (Sweden)

Hye-Min Kim

2016-12-01

Full Text Available Bone homeostasis is tightly regulated to balance bone formation and bone resorption. Many anabolic drugs are used as bone-targeted therapeutic agents for the promotion of osteoblast-mediated bone formation or inhibition of osteoclast-mediated bone resorption. Previous studies showed that ginsenoside Re has the effect of the suppression of osteoclast differentiation in mouse bone-marrow derived macrophages and zebrafish. Herein, we investigated whether ginsenoside Re affects osteoblast differentiation and mineralization in in vitro and in vivo models. Mouse osteoblast precursor MC3T3-E1 cells were used to investigate cell viability, alkaline phosphatase (ALP activity, and mineralization. In addition, we examined osteoblastic signaling pathways. Ginsenoside Re affected ALP activity without cytotoxicity, and we also observed the stimulation of osteoblast differentiation through the activation of osteoblast markers including runt-related transcription factor 2, type 1 collagen, ALP, and osteocalcin in MC3T3-E1 cells. Moreover, Alizarin red S staining indicated that ginsenoside Re increased osteoblast mineralization in MC3T3-E1 cells and zebrafish scales compared to controls. These results suggest that ginsenoside Re promotes osteoblast differentiation as well as inhibits osteoclast differentiation, and it could be a potential therapeutic agent for bone diseases.

Effect of surface topography and bioactive properties on early adhesion and growth behavior of mouse preosteoblast MC3T3-E1 cells.

Science.gov (United States)

Li, Na; Chen, Gang; Liu, Jue; Xia, Yang; Chen, Hanbang; Tang, Hui; Zhang, Feimin; Gu, Ning

2014-10-08

The effects of bioactive properties and surface topography of biomaterials on the adhesion and spreading properties of mouse preosteoblast MC3T3-E1 cells was investigated by preparation of different surfaces. Poly lactic-co-glycolic acid (PLGA) electrospun fibers (ES) were produced as a porous rough surface. In our study, coverslips were used as a substrate for the immobilization of 3,4-dihydroxyphenylalanine (DOPA) and collagen type I (COL I) in the preparation of bioactive surfaces. In addition, COL I was immobilized onto porous electrospun fibers surfaces (E-COL) to investigate the combined effects of bioactive molecules and topography. Untreated coverslips were used as controls. Early adhesion and growth behavior of MC3T3-E1 cells cultured on the different surfaces were studied at 6, 12, and 24 h. Evaluation of cell adhesion and morphological changes showed that the all the surfaces were favorable for promoting the adhesion and spreading of cells. CCK-8 assays and flow cytometry revealed that both topography and bioactive properties were favorable for cell growth. Analysis of β1, α1, α2, α5, α10 and α11 integrin expression levels by immunofluorescence, real-time RT-PCR, and Western blot and indicated that surface topography plays an important role in the early stage of cell adhesion. However, the influence of topography and bioactive properties of surfaces on integrins is variable. Compared with any of the topographic or bioactive properties in isolation, the combined effect of both types of properties provided an advantage for the growth and spreading of MC3T3-E1 cells. This study provides a new insight into the functions and effects of topographic and bioactive modifications of surfaces at the interface between cells and biomaterials for tissue engineering.

3D Aerosol-Cloud Radiative Interaction Observed in Collocated MODIS and ASTER Images of Cumulus Cloud Fields

Science.gov (United States)

Wen, Guoyong; Marshak, Alexander; Cahalan, Robert F.; Remer, Lorraine A.; Kleidman, Richard G.

2007-01-01

3D aerosol-cloud interaction is examined by analyzing two images containing cumulus clouds in biomass burning regions in Brazil. The research consists of two parts. The first part focuses on identifying 3D clo ud impacts on the reflectance of pixel selected for the MODIS aerosol retrieval based purely on observations. The second part of the resea rch combines the observations with radiative transfer computations to identify key parameters in 3D aerosol-cloud interaction. We found that 3D cloud-induced enhancement depends on optical properties of nearb y clouds as well as wavelength. The enhancement is too large to be ig nored. Associated biased error in 1D aerosol optical thickness retrie val ranges from 50% to 140% depending on wavelength and optical prope rties of nearby clouds as well as aerosol optical thickness. We caution the community to be prudent when applying 1D approximations in comp uting solar radiation in dear regions adjacent to clouds or when usin g traditional retrieved aerosol optical thickness in aerosol indirect effect research.

Overview of MPLNET Version 3 Cloud Detection

Science.gov (United States)

Lewis, Jasper R.; Campbell, James; Welton, Ellsworth J.; Stewart, Sebastian A.; Haftings, Phillip

2016-01-01

The National Aeronautics and Space Administration Micro Pulse Lidar Network, version 3, cloud detection algorithm is described and differences relative to the previous version are highlighted. Clouds are identified from normalized level 1 signal profiles using two complementary methods. The first method considers vertical signal derivatives for detecting low-level clouds. The second method, which detects high-level clouds like cirrus, is based on signal uncertainties necessitated by the relatively low signal-to-noise ratio exhibited in the upper troposphere by eye-safe network instruments, especially during daytime. Furthermore, a multitemporal averaging scheme is used to improve cloud detection under conditions of a weak signal-to-noise ratio. Diurnal and seasonal cycles of cloud occurrence frequency based on one year of measurements at the Goddard Space Flight Center (Greenbelt, Maryland) site are compared for the new and previous versions. The largest differences, and perceived improvement, in detection occurs for high clouds (above 5 km, above MSL), which increase in occurrence by over 5%. There is also an increase in the detection of multilayered cloud profiles from 9% to 19%. Macrophysical properties and estimates of cloud optical depth are presented for a transparent cirrus dataset. However, the limit to which the cirrus cloud optical depth could be reliably estimated occurs between 0.5 and 0.8. A comparison using collocated CALIPSO measurements at the Goddard Space Flight Center and Singapore Micro Pulse Lidar Network (MPLNET) sites indicates improvements in cloud occurrence frequencies and layer heights.

Human (InConsistencies in Ian McEwan’s Amsterdam

Directory of Open Access Journals (Sweden)

Anghel Florentina

2016-12-01

Full Text Available Ian McEwan’s Amsterdam has supplied its readers with psychological, moral and social topical issues presented in an easy flowing and exhilarating style. Starting from the assumption that life consists of a series of inconsistencies which are inherent and bring their contribution to the individual’s formation, the paper aims at demonstrating that the protagonists’ judgmental and moral inconsistencies, which are used as a plot generator and are environmentally determined, reveal features of their personality.

John Sidney McCain III. Elukaptenist sirgus sõjakangelane / Hendrik Vosman

Index Scriptorium Estoniae

Vosman, Hendrik

2008-01-01

Ilmunud ka: Postimees : na russkom jazõke 15. veebr. lk. 9. USA presidendivalimiste vabariiklaste kandidaadi John Sidney McCain III osalemisest Vietnami sõjas ning tegevusest poliitiku ja senati liikmena

Automatic Generation of Structural Building Descriptions from 3D Point Cloud Scans

DEFF Research Database (Denmark)

Ochmann, Sebastian; Vock, Richard; Wessel, Raoul

2013-01-01

We present a new method for automatic semantic structuring of 3D point clouds representing buildings. In contrast to existing approaches which either target the outside appearance like the facade structure or rather low-level geometric structures, we focus on the building’s interior using indoor...... scans to derive high-level architectural entities like rooms and doors. Starting with a registered 3D point cloud, we probabilistically model the affiliation of each measured point to a certain room in the building. We solve the resulting clustering problem using an iterative algorithm that relies...

Eschatologisch-Soteriologische Aspekte in Cormac McCarthy’s Roman: „The Road/Die Straße“

Directory of Open Access Journals (Sweden)

Peter Blomen

2012-06-01

Full Text Available Abstract to: Eschatological and Soteriological Aspects in Cormac McCarthy’s Novel „The Road“ - My deliberations emanate from the fact that McCarthy’s “The Road” was praised by the critics as the “book nearest approaching the Old Testament in the history of literature”. In the first instance, in this essay, consideration was given as to the philosophical-metaphysical foundations of this work of McCarthy’s as a whole. Moreover, connections with the Ontology of Martin Heidegger were established and, in particular, consideration with regard to his understanding of Humanity. These philosophical ways of thinking were, very briefly, applied to an early work of McCarthy’s, “Outer Dark”.In the main part of the deliberations I focus on the aspects and elements of the Judeo-Christian traditions which can be detected, in quantitatively large numbers, in McCarthy’s novel “The Road”. Nevertheless, these traditions found their way into world literature to which McCarthy refers directly or indirectly. A large part ofmy text analysis is devoted to the hidden parts of the eschatological-soteriological literature, as they appearagain in the novel “The Road”.Decisive, however, is that the loan which McCarthy takes in hand from the eschatological-soteriological characterised literary tradition, not only in a hyperbolical manner for his own literary purposes rather over and above the apocalypse of our time and the therefrom emerging redemption in the form of the Father-Son-Relationship, which is commemorated over and beyond death. McCarthy’s most important message exists not merely therein that the human race itself – deservedly – prepares its own end, rather the by far happier hopeful message that the book conveys, is the most important assertion of belief that St. Paul in the first Letter to the Corinthians undertakes: That the world, from pain, sorrow and ashes, may rise again in beauty and grace – presupposing we have not

Coupled fvGCM-GCE Modeling System, 3D Cloud-Resolving Model and Cloud Library

Science.gov (United States)

Tao, Wei-Kuo

2005-01-01

Recent GEWEX Cloud System Study (GCSS) model comparison projects have indicated that cloud- resolving models (CRMs) agree with observations better than traditional single-column models in simulating various types of clouds and cloud systems from different geographic locations. Current and future NASA satellite programs can provide cloud, precipitation, aerosol and other data at very fine spatial and temporal scales. It requires a coupled global circulation model (GCM) and cloud-scale model (termed a super-parameterization or multi-scale modeling framework, MMF) to use these satellite data to improve the understanding of the physical processes that are responsible for the variation in global and regional climate and hydrological systems. The use of a GCM will enable global coverage, and the use of a CRM will allow for better and more sophisticated physical parameterization. NASA satellite and field campaign cloud related datasets can provide initial conditions as well as validation for both the MMF and CRMs. A seed fund is available at NASA Goddard to build a MMF based on the 2D Goddard Cumulus Ensemble (GCE) model and the Goddard finite volume general circulation model (fvGCM). A prototype MMF in being developed and production runs will be conducted at the beginning of 2005. In this talk, I will present: (1) A brief review on GCE model and its applications on precipitation processes, ( 2 ) The Goddard MMF and the major difference between two existing MMFs (CSU MMF and Goddard MMF), (3) A cloud library generated by Goddard MMF, and 3D GCE model, and (4) A brief discussion on the GCE model on developing a global cloud simulator.

Verification of MC{sup 2}-3 Doppler Sample Models in ZPPR-15 D Experiments

Energy Technology Data Exchange (ETDEWEB)

Lee, Min Jae; Hartanto, Donny; Kim, Sang Ji [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

In this paper, the change of reaction rate and broadened cross section were estimated by as-built MCNP models for metallic uranium sample in ZPPR-15D using ENDF/B-VII.0 library, and the results were compared with deterministic calculations provided in previous work. The Doppler broadening is an instant feedback mechanism that improves safety and stability for both thermal and fast reactors. Therefore, the accuracy of Doppler coefficient becomes an important parameter in reactor design as well as in the safety analysis. The capability of the Doppler worth calculation by a modern computer code suites such as MC2-3 and DIF3DVARIANT, has been validated against the Zero Power Physics Reactor-15 (ZPPR-15) Doppler worth measurement experiments. For the same experiments, our previous work suggested four different MC2-3 Doppler sample models for enhanced accuracy, which are combinations of heterogeneous models and the super cell approach. The MOC and MOC-SPC models showed the smallest error in estimating the U-238 total cross section of Doppler sample N-11, and the Doppler broadening effects are well applied to the cross section compared to other two models, HOM and SPC. The effects of the super cell approach can be hardly seen, since the broadened cross section is almost the same with and without the super cell approach. Comparing the transition of reaction density, MOC and MOC-SPC models also show similar behavior as MCNP's with minor errors. As a conclusion, we could obtain more consistent broadened cross section as well as reaction density transition by providing heterogeneous models from MC2-3's MOC module.

NASA 3D Models: CloudSat

Data.gov (United States)

National Aeronautics and Space Administration — Launched in April 2006, CloudSat monitors the state of the Earth’s atmosphere and weather with a sophisticated radar system. The instrument, jointly developed with...

Allelic variants of melanocortin 3 receptor gene (MC3R) and weight loss in obesity

DEFF Research Database (Denmark)

L. Santos, José; De la Cruz, Rolando; Holst, Claus

2011-01-01

receptor gene (MC3R) have been associated with childhood obesity, higher BMI Z-score and elevated body fat percentage compared to non-carriers. The aim of this study is to assess the association in adults between allelic variants of MC3R with weight loss induced by energy-restricted diets.......The melanocortin system plays an important role in energy homeostasis. Mice genetically deficient in the melanocortin-3 receptor gene have a normal body weight with increased body fat, mild hypophagia compared to wild-type mice. In humans, Thr6Lys and Val81Ile variants of the melanocortin-3...

Ghrelin inhibits the apoptosis of MC3T3-E1 cells through ERK and AKT signaling pathway

Energy Technology Data Exchange (ETDEWEB)

Liang, Qiu-Hua; Liu, Yuan; Wu, Shan-Shan; Cui, Rong-Rong; Yuan, Ling-Qing, E-mail: allenylq@hotmail.com; Liao, Er-Yuan, E-mail: eyliao@21cn.com

2013-11-01

Ghrelin is a 28-amino-acid peptide that acts as a natural endogenous ligand of the growth hormone secretagogue receptor (GHSR) and strongly stimulates the release of growth hormone from the hypothalamus–pituitary axis. Previous studies have identified the important physiological effects of ghrelin on bone metabolism, such as regulating proliferation and differentiation of osteoblasts, independent of GH/IGF-1 axis. However, research on effects and mechanisms of ghrelin on osteoblast apoptosis is still rare. In this study, we identified expression of GHSR in MC3T3-E1 cells and determined the effects of ghrelin on the apoptosis of osteoblastic MC3T3-E1 cells and the mechanism involved. Our data demonstrated that ghrelin inhibited the apoptosis of osteoblastic MC3T3-E1 cells induced by serum deprivation, as determined by terminal deoxynucleotidyl transferase-mediated deoxyribonucleotide triphosphate nick end-labeling (TUNEL) and ELISA assays. Moreover, ghrelin upregulated Bcl-2 expression and downregulated Bax expression in a dose-dependent manner. Our study also showed decreased activated caspase-3 activity under the treatment of ghrelin. Further study suggested that ghrelin stimulated the phosphorylation of ERK and AKT. Pretreatment of cells with the ERK inhibitor PD98059, PI3K inhibitor LY294002, and GHSR-siRNA blocked the ghrelin-induced activation of ERK and AKT, respectively; however, ghrelin did not stimulate the phosphorylation of p38 or JNK. PD90859, LY294002 and GHSR-siRNA attenuated the anti-apoptosis effect of ghrelin in MC3T3-E1 cells. In conclusion, ghrelin inhibits the apoptosis of osteoblastic MC3T3-E1 cells induced by serum deprivation, which may be mediated by activating the GHSR/ERK and GHSR/PI3K/AKT signaling pathways. - Highlights: • We explored the effects of ghrelin on serum deprivation-induced MC3T3-E1 cells apoptosis. • Both ELISA and TUNEL were used to detect the apoptosis. • The receptor of ghrelin, GHSR, was expressed in MC3T3-E1

Ghrelin inhibits the apoptosis of MC3T3-E1 cells through ERK and AKT signaling pathway

International Nuclear Information System (INIS)

Liang, Qiu-Hua; Liu, Yuan; Wu, Shan-Shan; Cui, Rong-Rong; Yuan, Ling-Qing; Liao, Er-Yuan

2013-01-01

Ghrelin is a 28-amino-acid peptide that acts as a natural endogenous ligand of the growth hormone secretagogue receptor (GHSR) and strongly stimulates the release of growth hormone from the hypothalamus–pituitary axis. Previous studies have identified the important physiological effects of ghrelin on bone metabolism, such as regulating proliferation and differentiation of osteoblasts, independent of GH/IGF-1 axis. However, research on effects and mechanisms of ghrelin on osteoblast apoptosis is still rare. In this study, we identified expression of GHSR in MC3T3-E1 cells and determined the effects of ghrelin on the apoptosis of osteoblastic MC3T3-E1 cells and the mechanism involved. Our data demonstrated that ghrelin inhibited the apoptosis of osteoblastic MC3T3-E1 cells induced by serum deprivation, as determined by terminal deoxynucleotidyl transferase-mediated deoxyribonucleotide triphosphate nick end-labeling (TUNEL) and ELISA assays. Moreover, ghrelin upregulated Bcl-2 expression and downregulated Bax expression in a dose-dependent manner. Our study also showed decreased activated caspase-3 activity under the treatment of ghrelin. Further study suggested that ghrelin stimulated the phosphorylation of ERK and AKT. Pretreatment of cells with the ERK inhibitor PD98059, PI3K inhibitor LY294002, and GHSR-siRNA blocked the ghrelin-induced activation of ERK and AKT, respectively; however, ghrelin did not stimulate the phosphorylation of p38 or JNK. PD90859, LY294002 and GHSR-siRNA attenuated the anti-apoptosis effect of ghrelin in MC3T3-E1 cells. In conclusion, ghrelin inhibits the apoptosis of osteoblastic MC3T3-E1 cells induced by serum deprivation, which may be mediated by activating the GHSR/ERK and GHSR/PI3K/AKT signaling pathways. - Highlights: • We explored the effects of ghrelin on serum deprivation-induced MC3T3-E1 cells apoptosis. • Both ELISA and TUNEL were used to detect the apoptosis. • The receptor of ghrelin, GHSR, was expressed in MC3T3-E1

Collagen-derived dipeptide prolyl-hydroxyproline promotes differentiation of MC3T3-E1 osteoblastic cells

International Nuclear Information System (INIS)

Kimira, Yoshifumi; Ogura, Kana; Taniuchi, Yuri; Kataoka, Aya; Inoue, Naoki; Sugihara, Fumihito; Nakatani, Sachie; Shimizu, Jun; Wada, Masahiro; Mano, Hiroshi

2014-01-01

Highlights: • Pro-Hyp did not affect MC3T3-E1 cell proliferation and matrix mineralization. • Pro-Hyp significantly increased alkaline phosphatase activity. • Pro-Hyp significantly upregulated gene expression of Runx2, Osterix, and Col1α1. - Abstract: Prolyl-hydroxyproline (Pro-Hyp) is one of the major constituents of collagen-derived dipeptides. The objective of this study was to investigate the effects of Pro-Hyp on the proliferation and differentiation of MC3T3-E1 osteoblastic cells. Addition of Pro-Hyp did not affect MC3T3-E1 cell proliferation and matrix mineralization but alkaline phosphatase activity was significantly increased. Furthermore, cells treated with Pro-Hyp significantly upregulated gene expression of Runx2, Osterix, and Col1α1. These results indicate that Pro-Hyp promotes osteoblast differentiation. This study demonstrates for the first time that Pro-Hyp has a positive effect on osteoblast differentiation with upregulation of Runx2, Osterix, and Collα1 gene expression

Lysophosphatidic acid induces chemotaxis in MC3T3-E1 osteoblastic cells

Energy Technology Data Exchange (ETDEWEB)

Masiello, Lisa M.; Fotos, Joseph S.; Galileo, Deni S.; Karin, Norm J.

2006-07-01

Lysophosphatidic acid (LPA) is a bioactive lipid that has pleiotropic effects on a variety of cell types and enhances the migration of endothelial and cancer cells, but it is not known if this lipid can alter osteoblast motility. We performed transwell migration assays using MC3T3-E1 osteoblastic cells and found LPA to be a potent chemotactic agent. Quantitative time-lapse video analysis of osteoblast migration after wounds were introduced into cell monolayers indicated that LPA stimulated both migration velocity and the average migration distance per cell. LPA also elicited substantial changes in cell shape and actin cytoskeletal structure; lipid-treated cells contained fewer stress fibers and displayed long membrane processes that were enriched in F-actin. Quantitative RT-PCR analysis showed that MC3T3-E1 cells express all four known LPA-specific G protein-coupled receptors (LPA1-LPA4) with a relative mRNA abundance of LPA1 > LPA4 > LPA2 >> LPA3. LPA-induced changes in osteoblast motility and morphology were antagonized by both pertussis toxin and Ki16425, a subtype-specific blocker of LPA1 and LPA3 receptor function. Cell migration in many cell types is linked to changes in intracellular Ca2+. Ki16425 also inhibited LPA-induced Ca2+ signaling in a dose-dependent manner, suggesting a link between LPA-induced Ca2+ transients and osteoblast chemotaxis. Our data show that LPA stimulates MC3T3-E1 osteoblast motility via a mechanism that is linked primarily to the G protein-coupled receptor LPA1.

DERIVING 3D POINT CLOUDS FROM TERRESTRIAL PHOTOGRAPHS - COMPARISON OF DIFFERENT SENSORS AND SOFTWARE

Directory of Open Access Journals (Sweden)

R. Niederheiser

2016-06-01

Full Text Available Terrestrial photogrammetry nowadays offers a reasonably cheap, intuitive and effective approach to 3D-modelling. However, the important choice, which sensor and which software to use is not straight forward and needs consideration as the choice will have effects on the resulting 3D point cloud and its derivatives. We compare five different sensors as well as four different state-of-the-art software packages for a single application, the modelling of a vegetated rock face. The five sensors represent different resolutions, sensor sizes and price segments of the cameras. The software packages used are: (1 Agisoft PhotoScan Pro (1.16, (2 Pix4D (2.0.89, (3 a combination of Visual SFM (V0.5.22 and SURE (1.2.0.286, and (4 MicMac (1.0. We took photos of a vegetated rock face from identical positions with all sensors. Then we compared the results of the different software packages regarding the ease of the workflow, visual appeal, similarity and quality of the point cloud. While PhotoScan and Pix4D offer the user-friendliest workflows, they are also “black-box” programmes giving only little insight into their processing. Unsatisfying results may only be changed by modifying settings within a module. The combined workflow of Visual SFM, SURE and CloudCompare is just as simple but requires more user interaction. MicMac turned out to be the most challenging software as it is less user-friendly. However, MicMac offers the most possibilities to influence the processing workflow. The resulting point-clouds of PhotoScan and MicMac are the most appealing.

Far-infrared observations of Large Magellanic Cloud H II regions

International Nuclear Information System (INIS)

Werner, M.W.; Becklin, E.E.; Gatley, I.; Ellis, M.J.; Hyland, A.R.; Robinson, G.; Thomas, J.A.

1978-01-01

Far-infrared emission has been measured from four Large Magellanic Cloud H II regions: the 30 Doradus nebula, MC75, MC76 and MC77. The far-infrared radiation is thermal emission from dust heated by starlight. The results show that the LMC H II regions, like H II regions in the Galaxy, have far-infrared luminosities comparable to the total luminosity of their exciting stars. (author)

An Automatic Cloud Detection Method for ZY-3 Satellite

Directory of Open Access Journals (Sweden)

CHEN Zhenwei

2015-03-01

Full Text Available Automatic cloud detection for optical satellite remote sensing images is a significant step in the production system of satellite products. For the browse images cataloged by ZY-3 satellite, the tree discriminate structure is adopted to carry out cloud detection. The image was divided into sub-images and their features were extracted to perform classification between clouds and grounds. However, due to the high complexity of clouds and surfaces and the low resolution of browse images, the traditional classification algorithms based on image features are of great limitations. In view of the problem, a prior enhancement processing to original sub-images before classification was put forward in this paper to widen the texture difference between clouds and surfaces. Afterwards, with the secondary moment and first difference of the images, the feature vectors were extended in multi-scale space, and then the cloud proportion in the image was estimated through comprehensive analysis. The presented cloud detection algorithm has already been applied to the ZY-3 application system project, and the practical experiment results indicate that this algorithm is capable of promoting the accuracy of cloud detection significantly.

Automatic Generation of Structural Building Descriptions from 3D Point Cloud Scans

DEFF Research Database (Denmark)

Ochmann, Sebastian; Vock, Richard; Wessel, Raoul

2013-01-01

We present a new method for automatic semantic structuring of 3D point clouds representing buildings. In contrast to existing approaches which either target the outside appearance like the facade structure or rather low-level geometric structures, we focus on the building’s interior using indoor...... scans to derive high-level architectural entities like rooms and doors. Starting with a registered 3D point cloud, we probabilistically model the affiliation of each measured point to a certain room in the building. We solve the resulting clustering problem using an iterative algorithm that relies...... on the estimated visibilities between any two locations within the point cloud. With the segmentation into rooms at hand, we subsequently determine the locations and extents of doors between adjacent rooms. In our experiments, we demonstrate the feasibility of our method by applying it to synthetic as well...

An Air-conditioned Global Warming. The Description of Settings in Ian McEwan’s Solar

Directory of Open Access Journals (Sweden)

Elisa Bolchi

2016-12-01

Full Text Available The three main settings of McEwan’s Solar, a novel described as “the first great global-warming novel” (Walsh 2010 are significant: from London, to the Artic Pole, up to the desert in New Mexico, these places are all described through the interior monologue of the anti-hero Michael Beard, a character allegorical of humanity’s greed for selfish over-consumption. As Beard moves in the real environment only through the non-places of supermodernity (Augé, the paper ana¬lyses the descriptions of settings to underline how McEwan uses them to write about climate- change in a new “novelistic” way (McEwan.

Welding thermal cycle-triggered precipitation processes in steel S700MC subjected to the thermo-mechanical control processing

OpenAIRE

Górka J.

2017-01-01

This study presents tests concerned with welding thermal process-induced precipitation processes taking place in 10 mm thick steel S700MC subjected to the Thermo-Mechanical Control Process (TMCP) with accelerated cooling. The thermomechanical processing of steel S700MC leads to its refinement, structural defects and solutioning with hardening constituents. Tests of thin foils performed using a transmission electron microscope revealed that the hardening of steel S700MC was primarily caused by...

CAD-based Monte Carlo program for integrated simulation of nuclear system SuperMC

International Nuclear Information System (INIS)

Wu, Yican; Song, Jing; Zheng, Huaqing; Sun, Guangyao; Hao, Lijuan; Long, Pengcheng; Hu, Liqin

2015-01-01

Highlights: • The new developed CAD-based Monte Carlo program named SuperMC for integrated simulation of nuclear system makes use of hybrid MC-deterministic method and advanced computer technologies. SuperMC is designed to perform transport calculation of various types of particles, depletion and activation calculation including isotope burn-up, material activation and shutdown dose, and multi-physics coupling calculation including thermo-hydraulics, fuel performance and structural mechanics. The bi-directional automatic conversion between general CAD models and physical settings and calculation models can be well performed. Results and process of simulation can be visualized with dynamical 3D dataset and geometry model. Continuous-energy cross section, burnup, activation, irradiation damage and material data etc. are used to support the multi-process simulation. Advanced cloud computing framework makes the computation and storage extremely intensive simulation more attractive just as a network service to support design optimization and assessment. The modular design and generic interface promotes its flexible manipulation and coupling of external solvers. • The new developed and incorporated advanced methods in SuperMC was introduced including hybrid MC-deterministic transport method, particle physical interaction treatment method, multi-physics coupling calculation method, geometry automatic modeling and processing method, intelligent data analysis and visualization method, elastic cloud computing technology and parallel calculation method. • The functions of SuperMC2.1 integrating automatic modeling, neutron and photon transport calculation, results and process visualization was introduced. It has been validated by using a series of benchmarking cases such as the fusion reactor ITER model and the fast reactor BN-600 model. - Abstract: Monte Carlo (MC) method has distinct advantages to simulate complicated nuclear systems and is envisioned as a routine

SU-E-T-314: The Application of Cloud Computing in Pencil Beam Scanning Proton Therapy Monte Carlo Simulation

Energy Technology Data Exchange (ETDEWEB)

Wang, Z [Reading Hospital, West Reading, PA (United States); Gao, M [ProCure Treatment Centers, Warrenville, IL (United States)

2014-06-01

Purpose: Monte Carlo simulation plays an important role for proton Pencil Beam Scanning (PBS) technique. However, MC simulation demands high computing power and is limited to few large proton centers that can afford a computer cluster. We study the feasibility of utilizing cloud computing in the MC simulation of PBS beams. Methods: A GATE/GEANT4 based MC simulation software was installed on a commercial cloud computing virtual machine (Linux 64-bits, Amazon EC2). Single spot Integral Depth Dose (IDD) curves and in-air transverse profiles were used to tune the source parameters to simulate an IBA machine. With the use of StarCluster software developed at MIT, a Linux cluster with 2–100 nodes can be conveniently launched in the cloud. A proton PBS plan was then exported to the cloud where the MC simulation was run. Results: The simulated PBS plan has a field size of 10×10cm{sup 2}, 20cm range, 10cm modulation, and contains over 10,000 beam spots. EC2 instance type m1.medium was selected considering the CPU/memory requirement and 40 instances were used to form a Linux cluster. To minimize cost, master node was created with on-demand instance and worker nodes were created with spot-instance. The hourly cost for the 40-node cluster was $0.63 and the projected cost for a 100-node cluster was $1.41. Ten million events were simulated to plot PDD and profile, with each job containing 500k events. The simulation completed within 1 hour and an overall statistical uncertainty of < 2% was achieved. Good agreement between MC simulation and measurement was observed. Conclusion: Cloud computing is a cost-effective and easy to maintain platform to run proton PBS MC simulation. When proton MC packages such as GATE and TOPAS are combined with cloud computing, it will greatly facilitate the pursuing of PBS MC studies, especially for newly established proton centers or individual researchers.

SU-E-T-314: The Application of Cloud Computing in Pencil Beam Scanning Proton Therapy Monte Carlo Simulation

International Nuclear Information System (INIS)

Wang, Z; Gao, M

2014-01-01

Purpose: Monte Carlo simulation plays an important role for proton Pencil Beam Scanning (PBS) technique. However, MC simulation demands high computing power and is limited to few large proton centers that can afford a computer cluster. We study the feasibility of utilizing cloud computing in the MC simulation of PBS beams. Methods: A GATE/GEANT4 based MC simulation software was installed on a commercial cloud computing virtual machine (Linux 64-bits, Amazon EC2). Single spot Integral Depth Dose (IDD) curves and in-air transverse profiles were used to tune the source parameters to simulate an IBA machine. With the use of StarCluster software developed at MIT, a Linux cluster with 2–100 nodes can be conveniently launched in the cloud. A proton PBS plan was then exported to the cloud where the MC simulation was run. Results: The simulated PBS plan has a field size of 10×10cm 2 , 20cm range, 10cm modulation, and contains over 10,000 beam spots. EC2 instance type m1.medium was selected considering the CPU/memory requirement and 40 instances were used to form a Linux cluster. To minimize cost, master node was created with on-demand instance and worker nodes were created with spot-instance. The hourly cost for the 40-node cluster was $0.63 and the projected cost for a 100-node cluster was $1.41. Ten million events were simulated to plot PDD and profile, with each job containing 500k events. The simulation completed within 1 hour and an overall statistical uncertainty of < 2% was achieved. Good agreement between MC simulation and measurement was observed. Conclusion: Cloud computing is a cost-effective and easy to maintain platform to run proton PBS MC simulation. When proton MC packages such as GATE and TOPAS are combined with cloud computing, it will greatly facilitate the pursuing of PBS MC studies, especially for newly established proton centers or individual researchers

Analýza systému franchisingu McDonald´s v podmínkách EU

OpenAIRE

Nováková, Monika

2007-01-01

Tato práce hodnotí systém franchisingu - v teoretické části obecně, dále v ČR i v zahraničí. V aplikaci pak na firmě McDonald´s. V práci je obsažen i aspekt ekologie, médií a globální pohled. Také vedlejší činnosti McDonald´s, McDonald´s Cup a charita.

ATLAS World-cloud and networking in PanDA

CERN Document Server

Barreiro Megino, Fernando Harald; The ATLAS collaboration; De, Kaushik; Di Girolamo, Alessandro; Walker, Rodney

2016-01-01

The ATLAS computing model was originally designed as static clouds (usually national or geographical groupings of sites) around the Tier 1 centers, which confined tasks and most of the data traffic. Since those early days, the sites' network bandwidth has increased at O(1000) and the difference in functionalities between Tier 1s and Tier 2s has reduced. After years of manual, intermediate solutions, we have now ramped up to full usage of World-cloud, the latest step in the PanDA Workload Management System to increase resource utilization on the ATLAS Grid, for all workflows (MC production, data (re)processing, etc.). We have based the development on two new site concepts. Nuclei sites are the Tier 1s and large Tier 2s, where tasks will be assigned and the output aggregated, and satellites are the sites that will execute the jobs and send the output to their nucleus. Nuclei and satellite sites are dynamically paired by PanDA for each task based on the input data availability, capability matching, site load and...

ATLAS WORLD-cloud and networking in PanDA

CERN Document Server

AUTHOR|(SzGeCERN)643806; The ATLAS collaboration; De, Kaushik; Di Girolamo, Alessandro; Maeno, Tadashi; Walker, Rodney

2017-01-01

The ATLAS computing model was originally designed as static clouds (usually national or geographical groupings of sites) around the Tier 1 centres, which confined tasks and most of the data traffic. Since those early days, the sites' network bandwidth has increased at 0(1000) and the difference in functionalities between Tier 1s and Tier 2s has reduced. After years of manual, intermediate solutions, we have now ramped up to full usage of World-cloud, the latest step in the PanDA Workload Management System to increase resource utilization on the ATLAS Grid, for all workflows (MC production, data (re)processing, etc.). We have based the development on two new site concepts. Nuclei sites are the Tier 1s and large Tier 2s, where tasks will be assigned and the output aggregated, and satellites are the sites that will execute the jobs and send the output to their nucleus. PanDA dynamically pairs nuclei and satellite sites for each task based on the input data availability, capability matching, site load and network...

Trust-Enhanced Cloud Service Selection Model Based on QoS Analysis.

Science.gov (United States)

Pan, Yuchen; Ding, Shuai; Fan, Wenjuan; Li, Jing; Yang, Shanlin

2015-01-01

Cloud computing technology plays a very important role in many areas, such as in the construction and development of the smart city. Meanwhile, numerous cloud services appear on the cloud-based platform. Therefore how to how to select trustworthy cloud services remains a significant problem in such platforms, and extensively investigated owing to the ever-growing needs of users. However, trust relationship in social network has not been taken into account in existing methods of cloud service selection and recommendation. In this paper, we propose a cloud service selection model based on the trust-enhanced similarity. Firstly, the direct, indirect, and hybrid trust degrees are measured based on the interaction frequencies among users. Secondly, we estimate the overall similarity by combining the experience usability measured based on Jaccard's Coefficient and the numerical distance computed by Pearson Correlation Coefficient. Then through using the trust degree to modify the basic similarity, we obtain a trust-enhanced similarity. Finally, we utilize the trust-enhanced similarity to find similar trusted neighbors and predict the missing QoS values as the basis of cloud service selection and recommendation. The experimental results show that our approach is able to obtain optimal results via adjusting parameters and exhibits high effectiveness. The cloud services ranking by our model also have better QoS properties than other methods in the comparison experiments.

What would McLuhan say about the smartphone?: applying McLuhan’s tetrad to the smartphone

OpenAIRE

Adam, Isabelle

2016-01-01

In this essay, the smartphone as a new technology and medium is analysed with regards to its effects on individuals and society. McLuhan’s tetrad serves as a framework for analysis, consisting of a set of four effects to examine media in their historical context and present environment as well as the characteris-tics and attributes of the medium itself. These effects include: enhancement, obsolescence, retrieval, and reversal. The smartphone enhances the accessibility and convenience of the m...

Colliding clouds and star formation in NGC 1333

International Nuclear Information System (INIS)

Loren, R.B.

1976-01-01

Ongoing star formation in the NGC 1333 molecular cloud is found to be the result of a cloud-cloud collision. Two velocity components at 6.3 and 8.3 km s -1 are observable in the CO and 13 CO spectra, with strong self-abosorption occurring only in the 8.3 km s -1 component. The cloud-cloud collision provides compression and heating of the back side of the 8.3 km s -1 cloud, while cool, unshocked gas on the front side of this cloud results in the observed self-absorption. With the 6.3 km s -1 cloud on the far side of the collision interface, no self-absorption occurs at this velocity. One result of the collision is the coalescence of the two velocity components into a single, intermediate velocity component observed at 7.5 km s -1 . Associated with this postcollision gas is a chain of newly formed stars which illuminates and heats the nebulosity of NGC 1333.At one end of this chain of stars is a region of enhanced CO line broadening, indicating a nonhomologous gravitational collapse of this portion of the cloud. The infrared stars closest to the part of the cloud which is collapsing are completely obscured at visual wavelengths, and several are associated with Herbig-Haro (HH) objects. With increasing displacement from the region of collapse, the stars become more visible, are probably older, and the CO self-absorption decreases at these positions in the cloud.The observed region in which the cloud-cloud collision is occurring is located at the intersection of an expanding neutral hydrogen shell and lower-velocity background H I

McDonald’s mārketinga komunikāciju analīze

OpenAIRE

Grigore, Lolita

2008-01-01

Maģistra darba tēma ir „McDonald’s mārketinga komunikāciju analīze”. Mārketinga komunikācijas ir viens no mārketinga mix elementiem, un tam ir svarīga nozīme attiecību veidošanā ar patērētājiem, tāpēc to veidošanai un uzturēšanai ir jāpievērš pastiprināta uzmanība. Darba mērķis ir McDonald’s veikto mārketinga komunikāciju izpēte (analīze) pasaules un Latvijas mērogā un noteikt mārketinga komunikāciju lomu faktoru kopā, kas ietekmē Latvijas iedzīvotāju uzvedību, izvēloties ātrās ēdināšanas...

Extending 3D near-cloud corrections from shorter to longer wavelengths

International Nuclear Information System (INIS)

Marshak, Alexander; Evans, K. Frank; Várnai, Tamás; Wen, Guoyong

2014-01-01

Satellite observations have shown a positive correlation between cloud amount and aerosol optical thickness (AOT) that can be explained by the humidification of aerosols near clouds, and/or by cloud contamination by sub-pixel size clouds and the cloud adjacency effect. The last effect may substantially increase reflected radiation in cloud-free columns, leading to overestimates in the retrieved AOT. For clear-sky areas near boundary layer clouds the main contribution to the enhancement of clear sky reflectance at shorter wavelengths comes from the radiation scattered into clear areas by clouds and then scattered to the sensor by air molecules. Because of the wavelength dependence of air molecule scattering, this process leads to a larger reflectance increase at shorter wavelengths, and can be corrected using a simple two-layer model [18]. However, correcting only for molecular scattering skews spectral properties of the retrieved AOT. Kassianov and Ovtchinnikov [9] proposed a technique that uses spectral reflectance ratios to retrieve AOT in the vicinity of clouds; they assumed that the cloud adjacency effect influences the spectral ratio between reflectances at two wavelengths less than it influences the reflectances themselves. This paper combines the two approaches: It assumes that the 3D correction for the shortest wavelength is known with some uncertainties, and then it estimates the 3D correction for longer wavelengths using a modified ratio method. The new approach is tested with 3D radiances simulated for 26 cumulus fields from Large-Eddy Simulations, supplemented with 40 aerosol profiles. The results showed that (i) for a variety of cumulus cloud scenes and aerosol profiles over ocean the 3D correction due to cloud adjacency effect can be extended from shorter to longer wavelengths and (ii) the 3D corrections for longer wavelengths are not very sensitive to unbiased random uncertainties in the 3D corrections at shorter wavelengths. - Highlights: �

Latent Heating Profiles Derived from ARM Radar Observations in MC3E and GoAmazon Field Campaigns

Science.gov (United States)

Min, Q.; Li, R.; Mu, Z.; Giangrande, S. E.; Wang, Y.

2016-12-01

Atmosphere latent heating (LH) is released through water phase change processes in the atmosphere. There is a physical connection between LH rate and updraft velocity (ω) inside clouds. In this study, we develop a new LH algorithm based on a quantified LH-ω relationship found in cloud resolving model (CRM) simulations. The self-consistency check with CRM simulations shows that the retrievals correctly replicate the main features of LH profiles, including their total and individual components (i.e. condensation-evaporation heating rate, deposition-sublimation heating rate, and freezing-melting heating rate). Further, the algorithm is applied to real cases from the DOE-ARM MC3E and GoAmazon2014/6 Field Campaigns using available UHF (915 and 1290 MHz) zenith radar retrievals of vertical velocity and rain rate as input. The retrieved LH profiles in the deep convective rains show positive heating throughout the column, the LH profiles in the stratiform rains with well-defined bright-band showing clear dipole patterns with positive heating above and negative cooling below the freezing level. The altitudes of maximum heating in the widespread stratiform regimes are clearly higher than those found within deep convective regions. Overall, these Latent heating rate profiles, as an important geophysical quantity of interest, can provide useful climate diagnostic data, and ultimately, constraints for model-based analyses of large-scale heating distributions.

The Impact of the Diurnal Cycle of Clouds and Precipitation over the Maritime Continent on the Propagation of the MJO into the Western Pacific

Science.gov (United States)

Burleyson, C. D.; Hagos, S. M.; Feng, Z.

2016-12-01

The processes that determine the interaction between the islands of the maritime continent (MC) and the eastward propagation of the Madden-Julian Oscillation (MJO) are poorly understood. We are undertaking a series of observational and modeling analyses aimed at understanding how clouds and precipitation over the islands of the MC lead to changes in the intensity of the MJO (inferred by the amplitude of the Real-time Multivariate MJO index [RMM] and other metrics) as it crosses the MC. One component of our analysis uses the long-term measurements from the DOE Atmospheric Radiation Measurement (ARM) sites in the Tropical Western Pacific (TWP) to examine cloud radiative effects as the MJO crosses the MC. Using the multi-year ARM dataset and a cloud resolving model (CRM), we show that the MJO interacts with the diurnal cycle of surface heating, clouds, and precipitation over the islands of the MC in a way that weakens it. Additionally, using a satellite climatology based on the TRMM 3B42 dataset we found that MJO episodes that weaken as they cross the MC are characterized by more frequent precipitation and warmer sea surface temperatures (SSTs) south of the equator and less frequent precipitation north of the equator compared to cases where the MJO intensifies. The north-south polarity in SSTs suggests a seasonal dependence in the ability of the MJO to cross the MC. This seasonality was confirmed by looking the seasonal distribution of changes in MJO amplitude as it crosses the MC. Consistent with the SST result, we found that MJO episodes that intensify as they cross the MC are more likely to occur during the northern hemisphere summer and less likely to occur during the northern hemisphere winter (Fig. 1). A regional CRM and satellite observations are used jointly to explore the processes responsible for this seasonality and to examine the impact of interannual oscillations such as ENSO and monsoons on the ability of the MJO to cross the MC. Fig. 1. The annual

Assessing Measurements of QoS for global Cloud Computing Services

DEFF Research Database (Denmark)

Pedersen, Jens Myrup; Riaz, M. Tahir; Júnior, Joaquim Celestino

2011-01-01

Many global distributed cloud computing applications and services running over the Internet, between globally dispersed clients and servers, will require certain levels of Quality of Service (QoS) in order to deliver and give a sufficiently smooth user experience. This would be essential for real......-time streaming multimedia applications like online gaming and watching movies on a pay as you use basis hosted in a cloud computing environment. However, guaranteeing or even predicting QoS in global and diverse networks supporting complex hosting of application services is a very challenging issue that needs...... a stepwise refinement approach to be solved as the technology of cloud computing matures. In this paper, we investigate if latency in terms of simple Ping measurements can be used as an indicator for other QoS parameters such as jitter and throughput. The experiments were carried out on a global scale...

CAD-based Monte Carlo program for integrated simulation of nuclear system SuperMC

International Nuclear Information System (INIS)

Wu, Y.; Song, J.; Zheng, H.; Sun, G.; Hao, L.; Long, P.; Hu, L.

2013-01-01

SuperMC is a (Computer-Aided-Design) CAD-based Monte Carlo (MC) program for integrated simulation of nuclear systems developed by FDS Team (China), making use of hybrid MC-deterministic method and advanced computer technologies. The design aim, architecture and main methodology of SuperMC are presented in this paper. The taking into account of multi-physics processes and the use of advanced computer technologies such as automatic geometry modeling, intelligent data analysis and visualization, high performance parallel computing and cloud computing, contribute to the efficiency of the code. SuperMC2.1, the latest version of the code for neutron, photon and coupled neutron and photon transport calculation, has been developed and validated by using a series of benchmarking cases such as the fusion reactor ITER model and the fast reactor BN-600 model

Formation of massive, dense cores by cloud-cloud collisions

Science.gov (United States)

Takahira, Ken; Shima, Kazuhiro; Habe, Asao; Tasker, Elizabeth J.

2018-05-01

We performed sub-parsec (˜ 0.014 pc) scale simulations of cloud-cloud collisions of two idealized turbulent molecular clouds (MCs) with different masses in the range of (0.76-2.67) × 104 M_{⊙} and with collision speeds of 5-30 km s-1. Those parameters are larger than in Takahira, Tasker, and Habe (2014, ApJ, 792, 63), in which study the colliding system showed a partial gaseous arc morphology that supports the NANTEN observations of objects indicated to be colliding MCs using numerical simulations. Gas clumps with density greater than 10-20 g cm-3 were identified as pre-stellar cores and tracked through the simulation to investigate the effects of the mass of colliding clouds and the collision speeds on the resulting core population. Our results demonstrate that the smaller cloud property is more important for the results of cloud-cloud collisions. The mass function of formed cores can be approximated by a power-law relation with an index γ = -1.6 in slower cloud-cloud collisions (v ˜ 5 km s-1), and is in good agreement with observation of MCs. A faster relative speed increases the number of cores formed in the early stage of collisions and shortens the gas accretion phase of cores in the shocked region, leading to the suppression of core growth. The bending point appears in the high-mass part of the core mass function and the bending point mass decreases with increase in collision speed for the same combination of colliding clouds. The higher-mass part of the core mass function than the bending point mass can be approximated by a power law with γ = -2-3 that is similar to the power index of the massive part of the observed stellar initial mass function. We discuss implications of our results for the massive-star formation in our Galaxy.

Characterizing Sorghum Panicles using 3D Point Clouds

Science.gov (United States)

Lonesome, M.; Popescu, S. C.; Horne, D. W.; Pugh, N. A.; Rooney, W.

2017-12-01

To address demands of population growth and impacts of global climate change, plant breeders must increase crop yield through genetic improvement. However, plant phenotyping, the characterization of a plant's physical attributes, remains a primary bottleneck in modern crop improvement programs. 3D point clouds generated from terrestrial laser scanning (TLS) and unmanned aerial systems (UAS) based structure from motion (SfM) are a promising data source to increase the efficiency of screening plant material in breeding programs. This study develops and evaluates methods for characterizing sorghum (Sorghum bicolor) panicles (heads) in field plots from both TLS and UAS-based SfM point clouds. The TLS point cloud over experimental sorghum field at Texas A&M farm in Burleston County TX were collected using a FARO Focus X330 3D laser scanner. SfM point cloud was generated from UAS imagery captured using a Phantom 3 Professional UAS at 10m altitude and 85% image overlap. The panicle detection method applies point cloud reflectance, height and point density attributes characteristic of sorghum panicles to detect them and estimate their dimensions (panicle length and width) through image classification and clustering procedures. We compare the derived panicle counts and panicle sizes with field-based and manually digitized measurements in selected plots and study the strengths and limitations of each data source for sorghum panicle characterization.

DSaaS: A cloud service for persistent data structures

CSIR Research Space (South Africa)

Le Roux, PB

2016-04-01

Full Text Available 2CSIR/SU Centre for Artificial Intelligence Research pierrebleroux@gmail.com, kroon@sun.ac.za, whkbester@cs.sun.ac.za Keywords: DaaS, SaaS, Cloud Computing, Persistent Data Structure, Version...

Protective effect of Edaravone against hypoxia-induced cytotoxicity in osteoblasts MC3T3-E1 cells.

Science.gov (United States)

Cao, Bo; Chai, Chunxiang; Zhao, Sishun

2015-12-01

Edaravone is a newly developed clinical medicine for the treatment of acute cerebral infarction. Reduced blood supply to bones (hypoxia) has been involved in the pathological development of osteoporosis. In this study, we investigated the effect of Edaravone and its latent mechanism on hypoxia-induced cell toxicity in MC3T3-E1 cells. Cell viability was determined by the 3-(4,5-dimethyl-thiazol-2yl)-2,5-diphenyl tetrazolium bromide (MTT) assay. Intracellular reactive oxygen species (ROS) and nitric oxide (NO) were determined by the fluorescence dyes 2',7'-dichlorofluorescein diacetate (DCFH-DA) and 4-amino-5-methylamino-2',7'-difluorofluorescein diacetate (DAF-FM DA), respectively. mRNA and proteins were determined by real-time polymerase chain reaction and Western blot analysis, respectively. Edaravone significantly restored the hypoxia-induced reduction of MC3T3-E1 cell viability and inhibited lactate dehydrogenase release. In addition, we found that Edaravone inhibits the generation of ROS and NO. Hoechst staining results indicated that the nuclear condensation characteristic of apoptosis was increased in MC3T3-E1 cells after hypoxia exposure, which was significantly suppressed by Edaravone treatment. Mechanistically, we found that Edaravone markedly reduced the expression of cleaved caspase-3 and blunted the release of cytochrome c. These findings strongly suggested that Edaravone suppresses hypoxia-induced cytotoxicity in MC3T3-E1 cells. The pleiotropic effects of Edaravone on hypoxia exposure in osteoblasts suggest potential antiosteoporosis mechanisms of Edaravone. © 2015 International Union of Biochemistry and Molecular Biology.

Wide field CO J = 3 → 2 mapping of the Serpens cloud core

DEFF Research Database (Denmark)

Dionatos, Odyssefs; Nisini, Brunella; Codella, Claudio

2010-01-01

Context. Outflows provide indirect means to gain insight into diverse star formation-associated phenomena. At the level of individual protostellar cores, both outflows and the intrinsic core properties can be used to study the mass accretion/ejection process of heavily embedded protostellar sources...... this homogeneous dataset for a single star-forming site. Methods. An area comprising 460″ × 230″ of the Serpens cloud core was mapped in 12CO J = 3 → 2 with the HARP-B heterodyne array at the James Clerk Maxwell Telescope; J = 3 → 2 observations are more sensitive tracers of hot outflow gas than lower...

Double-moment cloud microphysics scheme for the deep convection parameterization in the GFDL AM3

Science.gov (United States)

Belochitski, A.; Donner, L.

2014-12-01

A double-moment cloud microphysical scheme originally developed by Morrision and Gettelman (2008) for the stratiform clouds and later adopted for the deep convection by Song and Zhang (2011) has been implemented in to the Geophysical Fluid Dynamics Laboratory's atmospheric general circulation model AM3. The scheme treats cloud drop, cloud ice, rain, and snow number concentrations and mixing ratios as diagnostic variables and incorporates processes of autoconversion, self-collection, collection between hydrometeor species, sedimentation, ice nucleation, drop activation, homogeneous and heterogeneous freezing, and the Bergeron-Findeisen process. Such detailed representation of microphysical processes makes the scheme suitable for studying the interactions between aerosols and convection, as well as aerosols' indirect effects on clouds and their roles in climate change. The scheme is first tested in the single column version of the GFDL AM3 using forcing data obtained at the U.S. Department of Energy Atmospheric Radiation Measurment project's Southern Great Planes site. Scheme's impact on SCM simulations is discussed. As the next step, runs of the full atmospheric GCM incorporating the new parameterization are compared to the unmodified version of GFDL AM3. Global climatological fields and their variability are contrasted with those of the original version of the GCM. Impact on cloud radiative forcing and climate sensitivity is investigated.

Cloud Study Investigators: Using NASA's CERES S'COOL in Problem-Based Learning

Science.gov (United States)

Moore, Susan; Popiolkowski, Gary

2011-01-01

1This article describes how, by incorporating NASA's Students' Cloud Observations On-Line (S'COOL) project into a problem-based learning (PBL) activity, middle school students are engaged in authentic scientific research where they observe and record information about clouds and contribute ground truth data to NASA's Clouds and the Earth's…

Techno-Orientalism with Chinese Characteristics: Maureen F. McHugh’s China Mountain Zhang

Directory of Open Access Journals (Sweden)

Christopher T. Fan

2015-03-01

Full Text Available Christopher T. Fan argues that McHugh’s award-winning 1992 science fiction novel perceives the twilight of the American Century by offering a “critical realism,” to use Georg Lukács’s phrase, of postsocialist US–China interdependency. In other words, it offers a form in which we perceive ourselves as subjects and objects of the twenty-first century world-system’s most important bilateral relationship. Moreover, as a novel about US–China interdependency, it implicitly critiques the binary Orientalism that structures the rapidly growing body of work on “techno-Orientalist” formations. Fan's analysis thus extends arguments about American Orientalism’s non-Manichean formations (Christina Klein, Melani McAlister, Colleen Lye into the postsocialist era.The novel’s near-future, China-centric world analogizes McHugh’s personal crises of professional desire as a precarious laborer in New York City, with the massive reorientation of desires from Maoist politics to market-directed individuality that she witnessed among her students when she taught in China from 1987–1988. Chinese racial form plays a crucial mediating role in the novel because it reflects the revival of Confucian humanist discourse in reform-era China as a way to focus a national project of rapidly generating capitalist desire. Finally, by describing US–China interdependency, this article also generates a theory of US–China neoliberalism that corrects for universalist, Euro-American accounts of neoliberal subject formation (Lauren Berlant, as well as insufficiently subject-sensitive accounts (Aihwa Ong.

The cloud-radiative forcing of the U.S. landfalling atmospheric rivers

Science.gov (United States)

Luo, Qianwen

Atmospheric rivers (ARs) are narrow channels in the atmosphere that transport an enormous amount of moisture from the tropics to the higher latitudes. Streaks of highly reflective clouds are observed along with the ARs in satellite imagery. These clouds both influence the moisture transport of ARs, as well as modify the Earth-Atmospheric energy budget through pathways such as cloud-radiative forcing (CRF). This dissertation studies the CRF of the U.S. Landfalling ARs in weather and climate scales. Three crucial questions are addressed. First, how do clouds produced by the ARs modulate the moisture and heat balance of the Earth-Atmospheric system? Even though studies of ARs date back to the 90s, past research has been primarily focused on their hydrological impacts. We addressed this research gap by comparing the dominant types of precipitating clouds and convection of two ARs. Through quantifying their effects on the energy balance in the midlatitudes, we found that when deep convection was the dominant cloud types of an AR, impressive CRF cooling was produced. Second, what are the sufficient climate conditions for the extensive CRF in the continental U.S.? We studied 60 ARs that reached the California coast (the Southwest ARs) and 60 ARs that reached Pacific Northwest during Nov-Mar, 2000-2008. It was found that when these West-Coast ARs were followed by the moisture surge from the Gulf of Mexico (the Gulf-Coast AR), it resulted in apparent statewide CRF. Such condition happened more frequently in the Southwest-AR scenario. Third, how does the subgrid-scale-convection-induced CRF influence the moisture transport of ARs?We ran two WRF ARW simulations for a Southwest-AR that was followed by a Gulf-Coast AR. The only difference between the two simulations was one considered the CRF of subgrid-scale clouds while the other did not. By comparing the two simulations, we found that the subgrid-scale-convection-induced CRF helped prolong the lifespan of clouds in an AR

ClC-3 Promotes Osteogenic Differentiation in MC3T3-E1 Cell After Dynamic Compression.

Science.gov (United States)

Wang, Dawei; Wang, Hao; Gao, Feng; Wang, Kun; Dong, Fusheng

2017-06-01

ClC-3 chloride channel has been proved to have a relationship with the expression of osteogenic markers during osteogenesis, persistent static compression can upregulate the expression of ClC-3 and regulate osteodifferentiation in osteoblasts. However, there was no study about the relationship between the expression of ClC-3 and osteodifferentiation after dynamic compression. In this study, we applied dynamic compression on MC3T3-E1 cells to detect the expression of ClC-3, runt-related transcription factor 2 (Runx2), bone morphogenic protein-2 (BMP-2), osteopontin (OPN), nuclear-associated antigen Ki67 (Ki67), and proliferating cell nuclear antigen (PCNA) in biopress system, then we investigated the expression of these genes after dynamic compression with Chlorotoxin (specific ClC-3 chloride channel inhibitor) added. Under transmission electron microscopy, there were more cell surface protrusions, rough surfaced endoplasmic reticulum, mitochondria, Golgi apparatus, abundant glycogen, and lysosomes scattered in the cytoplasm in MC3T3-E1 cells after dynamic compression. The nucleolus was more obvious. We found that ClC-3 was significantly up-regulated after dynamic compression. The compressive force also up-regulated Runx2, BMP-2, and OPN after dynamic compression for 2, 4 and 8 h. The proliferation gene Ki67 and PCNA did not show significantly change after dynamic compression for 8 h. Chlorotoxin did not change the expression of ClC-3 but reduced the expression of Runx2, BMP-2, and OPN after dynamic compression compared with the group without Cltx added. The data from the current study suggested that ClC-3 may promotes osteogenic differentiation in MC3T3-E1 cell after dynamic compression. J. Cell. Biochem. 118: 1606-1613, 2017. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Benefits Management of Cloud Computing Investments

OpenAIRE

Richard Greenwell; Xiaodong Liu; Kevin Chalmers

2014-01-01

This paper examines investments in cloud computing using the Benefits Management approach. The major contribution of the paper is to provide a unique insight into how organizations derive value from cloud computing investments. The motivation for writing this paper is to consider the business benefits generated from utilizing cloud computing in a range of organizations. Case studies are used to describe a number of organizations approaches to benefits exploitation using cloud computing. It wa...

Unraveling Network-induced Memory Contention: Deeper Insights with Machine Learning

International Nuclear Information System (INIS)

Groves, Taylor Liles; Grant, Ryan; Gonzales, Aaron; Arnold, Dorian

2017-01-01

Remote Direct Memory Access (RDMA) is expected to be an integral communication mechanism for future exascale systems enabling asynchronous data transfers, so that applications may fully utilize CPU resources while simultaneously sharing data amongst remote nodes. We examine Network-induced Memory Contention (NiMC) on Infiniband networks. We expose the interactions between RDMA, main-memory and cache, when applications and out-of-band services compete for memory resources. We then explore NiMCs resulting impact on application-level performance. For a range of hardware technologies and HPC workloads, we quantify NiMC and show that NiMCs impact grows with scale resulting in up to 3X performance degradation at scales as small as 8K processes even in applications that previously have been shown to be performance resilient in the presence of noise. In addition, this work examines the problem of predicting NiMC's impact on applications by leveraging machine learning and easily accessible performance counters. This approach provides additional insights about the root cause of NiMC and facilitates dynamic selection of potential solutions. Finally, we evaluated three potential techniques to reduce NiMCs impact, namely hardware offloading, core reservation and network throttling.

Comparison of Cloud and Aerosol Detection between CERES Edition 3 Cloud Mask and CALIPSO Version 2 Data Products

Science.gov (United States)

Trepte, Qing; Minnis, Patrick; Sun-Mack, Sunny; Trepte, Charles

Clouds and aerosol play important roles in the global climate system. Accurately detecting their presence, altitude, and properties using satellite radiance measurements is a crucial first step in determining their influence on surface and top-of-atmosphere radiative fluxes. This paper presents a comparison analysis of a new version of the Clouds and Earth's Radiant Energy System (CERES) Edition 3 cloud detection algorithms using Aqua MODIS data with the recently released Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) Version 2 Vertical Feature Mask (VFM). Improvements in CERES Edition 3 cloud mask include dust detection, thin cirrus tests, enhanced low cloud detection at night, and a smoother transition from mid-latitude to polar regions. For the CALIPSO Version 2 data set, changes to the lidar calibration can result in significant improvements to its identification of optically thick aerosol layers. The Aqua and CALIPSO satellites, part of the A-train satellite constellation, provide a unique opportunity for validating passive sensor cloud and aerosol detection using an active sensor. In this paper, individual comparison cases will be discussed for different types of clouds and aerosols over various surfaces, for daytime and nighttime conditions, and for regions ranging from the tropics to the poles. Examples will include an assessment of the CERES detection algorithm for optically thin cirrus, marine stratus, and polar night clouds as well as its ability to characterize Saharan dust plumes off the African coast. With the CALIPSO lidar's unique ability to probe the vertical structure of clouds and aerosol layers, it provides an excellent validation data set for cloud detection algorithms, especially for polar nighttime clouds.

McArdle Disease

DEFF Research Database (Denmark)

Santalla, Alfredo; Nogales-Gadea, Gisela; Ørtenblad, Niels

2014-01-01

McArdle disease is arguably the paradigm of exercise intolerance in humans. This disorder is caused by inherited deficiency of myophosphorylase, the enzyme isoform that initiates glycogen breakdown in skeletal muscles. Because patients are unable to obtain energy from their muscle glycogen stores......, this disease provides an interesting model of study for exercise physiologists, allowing insight to be gained into the understanding of glycogen-dependent muscle functions. Of special interest in the field of muscle physiology and sports medicine are also some specific (if not unique) characteristics...

Dynamic web cache publishing for IaaS clouds using Shoal

International Nuclear Information System (INIS)

Gable, Ian; Chester, Michael; Berghaus, Frank; Leavett-Brown, Colin; Paterson, Michael; Prior, Robert; Sobie, Randall; Taylor, Ryan; Armstrong, Patrick; Charbonneau, Andre

2014-01-01

We have developed a highly scalable application, called Shoal, for tracking and utilizing a distributed set of HTTP web caches. Our application uses the Squid HTTP cache. Squid servers advertise their existence to the Shoal server via AMQP messaging by running Shoal Agent. The Shoal server provides a simple REST interface that allows clients to determine their closest Squid cache. Our goal is to dynamically instantiate Squid caches on IaaS clouds in response to client demand. Shoal provides the VMs on IaaS clouds with the location of the nearest dynamically instantiated Squid Cache

The role of non-thermal atmospheric pressure biocompatible plasma in the differentiation of osteoblastic precursor cells, MC3T3-E1.

Science.gov (United States)

Han, Ihn; Choi, Eun Ha

2017-05-30

Non-thermal atmospheric pressure plasma is ionized matter, composed of highly reactive species that include positive ions, negative ions, free radicals, neutral atoms, and molecules. Recent reports have suggested that non-thermal biocompatible plasma (NBP) can selectively kill a variety of cancer cells, and promote stem cell differentiation. However as of yet, the regulation of proliferation and differentiation potential of NBP has been poorly understood.Here, we investigated the effects of NBP on the osteogenic differentiation of precursor cell lines of osteoblasts, MC3T3 E1 and SaOS-2. For in vitro osteogenic differentiation, precursor cell lines were treated with NBP, and cultured with osteogenic induction medium. After 10 days of treatment, the NBP was shown to be effective in osteogenic differentiation in MC3T3 E1 cells by von Kossa and Alizarin Red S staining assay. Real-time PCR was then performed to investigate the expression of osteogenic specific genes, Runx2, OCN, COL1, ALP and osterix in MC3T3 E1 cells after treatment with NBP for 4 days. Furthermore, analysis of the protein expression showed that NBP treatment significantly reduced PI3K/AKT signaling and MAPK family signaling. However, p38 controlled phosphorylation of transcription factor forkhead box O1 (FoxO1) that related to cell differentiation with increased phosphorylated p38. These results suggest that non-thermal atmospheric pressure plasma can induce osteogenic differentiation, and enhance bone formation.

Functional expression of 5-HT{sub 2A} receptor in osteoblastic MC3T3-E1 cells

Energy Technology Data Exchange (ETDEWEB)

Hirai, Takao; Kaneshige, Kota; Kurosaki, Teruko [Department of Molecular Pharmacology, Faculty of Pharmacy and Pharmaceutical Sciences, Fukuyama University, 1 Gakuen-cho, Fukuyama, Hiroshima 729-0292 (Japan); Nishio, Hiroaki, E-mail: nishio@fupharm.fukuyama-u.ac.jp [Department of Molecular Pharmacology, Faculty of Pharmacy and Pharmaceutical Sciences, Fukuyama University, 1 Gakuen-cho, Fukuyama, Hiroshima 729-0292 (Japan)

2010-05-28

In the previous study, we reported the gene expression for proteins related to the function of 5-hydroxytryptamine (5-HT, serotonin) and elucidated the expression patterns of 5-HT{sub 2} receptor subtypes in mouse osteoblasts. In the present study, we evaluated the possible involvement of 5-HT receptor subtypes and its inactivation system in MC3T3-E1 cells, an osteoblast cell line. DOI, a 5-HT{sub 2A} and 5-HT{sub 2C} receptor selective agonist, as well as 5-HT concentration-dependently increased proliferative activities of MC3T3-E1 cells in their premature period. This effect of 5-HT on cell proliferation were inhibited by ketanserin, a 5-HT{sub 2A} receptor specific antagonist. Moreover, both DOI-induced cell proliferation and phosphorylation of ERK1 and 2 proteins were inhibited by PD98059 and U0126, selective inhibitors of MEK in a concentration-dependent manner. Furthermore, treatment with fluoxetine, a 5-HT specific re-uptake inhibitor which inactivate the function of extracellular 5-HT, significantly increased the proliferative activities of MC3T3-E1 cells in a concentration-dependent manner. Our data indicate that 5-HT fill the role for proliferation of osteoblast cells in their premature period. Notably, 5-HT{sub 2A} receptor may be functionally expressed to regulate mechanisms underlying osteoblast cell proliferation, at least in part, through activation of ERK/MAPK pathways in MC3T3-E1 cells.

A portable low-cost 3D point cloud acquiring method based on structure light

Science.gov (United States)

Gui, Li; Zheng, Shunyi; Huang, Xia; Zhao, Like; Ma, Hao; Ge, Chao; Tang, Qiuxia

2018-03-01

A fast and low-cost method of acquiring 3D point cloud data is proposed in this paper, which can solve the problems of lack of texture information and low efficiency of acquiring point cloud data with only one pair of cheap cameras and projector. Firstly, we put forward a scene adaptive design method of random encoding pattern, that is, a coding pattern is projected onto the target surface in order to form texture information, which is favorable for image matching. Subsequently, we design an efficient dense matching algorithm that fits the projected texture. After the optimization of global algorithm and multi-kernel parallel development with the fusion of hardware and software, a fast acquisition system of point-cloud data is accomplished. Through the evaluation of point cloud accuracy, the results show that point cloud acquired by the method proposed in this paper has higher precision. What`s more, the scanning speed meets the demand of dynamic occasion and has better practical application value.

A Reference Architecture for a Cloud-Based Tools as a Service Workspace

DEFF Research Database (Denmark)

Chauhan, Aufeef; Babar, Muhammad Ali; Sheng, Quan Z.

2015-01-01

Software Architecture (SA) plays a critical role in developing and evolving cloud-based applications. We present a Reference Architecture (RA) for designing Cloud-based Tools as a service work SPACE (TSPACE) - a platform for provisioning chain of tools following the Software as a Service (SaaS...... evaluate the RA in terms of completeness and feasibility. Our proposed RA can provide valuable guidance and insights for designing and implementing concrete software architectures of TSPACE....

Interaction between the SNR Sagittarius A East and the 50-km s-1 Molecular Cloud

International Nuclear Information System (INIS)

Tsuboi, Masato; Okumura, Sachiko K; Miyazaki, Atsushi

2006-01-01

We performed high-resolution observations of the Galactic Center 50-km s -1 molecular cloud in the CS J = 1 - 0 line using the Nobeyama Millimeter Array. The 50-km s -1 molecular cloud corresponds to a break in the Sagittarius (Sgr) A east shell. A very broad and negative velocity wing feature is detected at an apparent contact spot between the molecular cloud and the Sgr A east shell. The velocity width of the wing feature is over 50-km s -1 . The width is three times wider than those of typical Galactic Center clouds. This strongly suggests that the shell is interacting physically with the molecular cloud. The asymmetric velocity profile of the wing feature indicates that the Sgr A east shell expands and crashes into the far side of the molecular cloud. About 50 clumps are identified in the cloud using CLUMPFIND. The velocity width-size relation and the mass spectrum of clumps in the cloud are similar to those in Central Molecular Zone (CMZ)

Lidar Point Cloud - USGS National Map 3DEP Downloadable Data Collection

Data.gov (United States)

U.S. Geological Survey, Department of the Interior — This data collection consists of Lidar Point Cloud (LPC) projects as provided to the USGS. These point cloud files contain all the original lidar points collected,...

Ammonia observations of the molecular clouds near S68, S140, OMC2 and S106

International Nuclear Information System (INIS)

Little, L.T.; Brown, A.T.; Macdonald, G.H.; Riley, P.W.; Matheson, D.N.

1980-01-01

The J=1, K=1 and J=2, K=2 transitions of interstellar ammonia have been observed in the molecular clouds near S68, S140, OMC2 and S106. Maps of the ammonia emission obtained with a 2.2-arcmin beam are presented and compared with observations of other interstellar molecules, in particular carbon monoxide and formaldehyde. The distribution of the ammonia emission in OMC2 and S140 resembles more closely that of 2-mm formaldehyde than 13 CO, which is generally more extended. On the other hand, the densities of hydrogen molecules derived from the ammonia observations on the basis of a simple uniform-density model for the source are much lower than those obtained from 2-mm formaldehyde observations. This discrepancy may be resolved either by assuming a 'core-halo' or a 'clumped' structure for the source. The limits to 'halo' emission are used to suggest that the latter possibility is more probable, in which case the medium is well modelled as many clumps of density approximately 10 6 cm -3 and size -2 pc, immersed in a more tenuous medium of density approximately 10sup(3 to 4)cm -3 . (author)

The Feasibility of 3d Point Cloud Generation from Smartphones

Science.gov (United States)

Alsubaie, N.; El-Sheimy, N.

2016-06-01

This paper proposes a new technique for increasing the accuracy of direct geo-referenced image-based 3D point cloud generated from low-cost sensors in smartphones. The smartphone's motion sensors are used to directly acquire the Exterior Orientation Parameters (EOPs) of the captured images. These EOPs, along with the Interior Orientation Parameters (IOPs) of the camera/ phone, are used to reconstruct the image-based 3D point cloud. However, because smartphone motion sensors suffer from poor GPS accuracy, accumulated drift and high signal noise, inaccurate 3D mapping solutions often result. Therefore, horizontal and vertical linear features, visible in each image, are extracted and used as constraints in the bundle adjustment procedure. These constraints correct the relative position and orientation of the 3D mapping solution. Once the enhanced EOPs are estimated, the semi-global matching algorithm (SGM) is used to generate the image-based dense 3D point cloud. Statistical analysis and assessment are implemented herein, in order to demonstrate the feasibility of 3D point cloud generation from the consumer-grade sensors in smartphones.

Enhancing osteogenic differentiation of MC3T3-E1 cells by immobilizing RGD onto liquid crystal substrate

International Nuclear Information System (INIS)

Wu, Shaopeng; Yang, Xiaohui; Li, Wenqiang; Du, Lin; Zeng, Rong; Tu, Mei

2017-01-01

To understand the effects of GRGDF modification on MC3T3-E1 cell behavior, we cultured these cells onto a biomimetic liquid crystalline matrix modified with GRGDF peptide (OPC-GA-RGD). Successful immobilization of GRGDF on the liquid crystalline surface was verified by fluorescent labeling, attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS). OPC-GA-RGDs retained its liquid crystalline feature after surface modification. The RGD-immobilized OPC substrate was hardly beneficial to initial cell adhesion but could support long-term cell survival. The enhancement in cell proliferation did not correlate with RGD density. The lower GRGDF density immobilized on the liquid crystalline OPC matrix (OPC-GA-RGD3) promoted cell adhesion, proliferation, ALP expression level and mineralization, suggesting that both the viscoelasticity-based mechanical stimuli and receptor/ligand-based biochemical cue synergistically modulate MC3T3-E1 cell behavior. - Highlight: • A novel type of GRGDF-immobilized liquid crystalline matrices was fabricated and served as a substrate for the in vitro culture of MC3T3-E1 cells. • The lower RGD density might provide a better condition for initial cell adhesion and proliferation, up-regulation of ALP expression levels, and mineralization. • The intrinsic liquid crystalline feature of OPC matrix, instead of RGD efficiency, promoted initial cell adhesion. • Properties of the liquid crystalline OPC matrix together with the stable receptor-ligand binging synergistically modulated MC3T3-E1 cell behavior.

Enhancing osteogenic differentiation of MC3T3-E1 cells by immobilizing RGD onto liquid crystal substrate

Energy Technology Data Exchange (ETDEWEB)

Wu, Shaopeng; Yang, Xiaohui; Li, Wenqiang; Du, Lin; Zeng, Rong; Tu, Mei, E-mail: tumei@jnu.edu.cn

2017-02-01

To understand the effects of GRGDF modification on MC3T3-E1 cell behavior, we cultured these cells onto a biomimetic liquid crystalline matrix modified with GRGDF peptide (OPC-GA-RGD). Successful immobilization of GRGDF on the liquid crystalline surface was verified by fluorescent labeling, attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS). OPC-GA-RGDs retained its liquid crystalline feature after surface modification. The RGD-immobilized OPC substrate was hardly beneficial to initial cell adhesion but could support long-term cell survival. The enhancement in cell proliferation did not correlate with RGD density. The lower GRGDF density immobilized on the liquid crystalline OPC matrix (OPC-GA-RGD3) promoted cell adhesion, proliferation, ALP expression level and mineralization, suggesting that both the viscoelasticity-based mechanical stimuli and receptor/ligand-based biochemical cue synergistically modulate MC3T3-E1 cell behavior. - Highlight: • A novel type of GRGDF-immobilized liquid crystalline matrices was fabricated and served as a substrate for the in vitro culture of MC3T3-E1 cells. • The lower RGD density might provide a better condition for initial cell adhesion and proliferation, up-regulation of ALP expression levels, and mineralization. • The intrinsic liquid crystalline feature of OPC matrix, instead of RGD efficiency, promoted initial cell adhesion. • Properties of the liquid crystalline OPC matrix together with the stable receptor-ligand binging synergistically modulated MC3T3-E1 cell behavior.

Cloud blueprints for integrating and managing cloud federations

NARCIS (Netherlands)

Papazoglou, M.; Heisel, M.

2012-01-01

Contemporary cloud technologies face insurmountable obstacles. They follow a pull-based, producer-centric trajectory to development where cloud consumers have to ‘squeeze and bolt’ applications onto cloud APIs. They also introduce a monolithic SaaS/PaaS/IaaS stack where a one-size-fits-all mentality

GPM GROUND VALIDATION COMPOSITE SATELLITE OVERPASSES MC3E V1

Data.gov (United States)

National Aeronautics and Space Administration — The GPM Ground Validation Composite Satellite Overpasses MC3E dataset provides satellite overpasses from the AQUA satellite during the Midlatitude Continental...

Non-equilibrium ionization around clouds evaporating in the interstellar medium

International Nuclear Information System (INIS)

Ballet, J.; Luciani, J.F.; Mora, P.

1986-01-01

It is of prime importance for global models of the interstellar medium to know whether dense clouds do or do not evaporate in the hot coronal gas. The rate of mass exchanges between phases depends very much on that. McKee and Ostriker's model, for instance, assumes that evaporation is important enough to control the expansion of supernova remnants, and that mass loss obeys the law derived by Cowie and McKee. In fact, the geometry of the magnetic field is nearly unknown, and it might totally inhibit evaporation, if the clouds are not regularly connected to the hot gas. Up to now, the only test of the theory is the U.V. observation (by the Copernicus and IUE satellites) of absorption lines of ions such as OVI or NV, that exist at temperatures of a few 100,000 K typical of transition layers around evaporating clouds. Other means of testing the theory are discussed

First vapor explosion calculations performed with MC3D thermal-hydraulic code

Energy Technology Data Exchange (ETDEWEB)

Brayer, C.; Berthoud, G. [CEA Centre d`Etudes de Grenoble, 38 (France). Direction des Reacteurs Nucleaires

1998-01-01

This paper presents the first calculations performed with the `explosion` module of the multiphase computer code MC3D, which is devoted to the fine fragmentation and explosion phase of a fuel coolant interaction. A complete description of the physical laws included in this module is given. The fragmentation models, taking into account two fragmentation mechanisms, a thermal one and an hydrodynamic one, are also developed here. Results to some calculations to test the numerical behavior of MC3D and to test the explosion models in 1D or 2D are also presented. (author)

Cloud-Based DDoS HTTP Attack Detection Using Covariance Matrix Approach

Directory of Open Access Journals (Sweden)

Abdulaziz Aborujilah

2017-01-01

Full Text Available In this era of technology, cloud computing technology has become essential part of the IT services used the daily life. In this regard, website hosting services are gradually moving to the cloud. This adds new valued feature to the cloud-based websites and at the same time introduces new threats for such services. DDoS attack is one such serious threat. Covariance matrix approach is used in this article to detect such attacks. The results were encouraging, according to confusion matrix and ROC descriptors.

CloudMonitor: Profiling Power Usage

OpenAIRE

Smith, James William; Khajeh-Hosseini, Ali; Ward, Jonathan Stuart; Sommerville, Ian

2012-01-01

In Cloud Computing platforms the addition of hardware monitoring devices to gather power usage data can be impractical or uneconomical due to the large number of machines to be metered. CloudMonitor, a monitoring tool that can generate power models for software-based power estimation, can provide insights to the energy costs of deployments without additional hardware. Accurate power usage data leads to the possibility of Cloud providers creating a separate tariff for power and therefore incen...

Retrievals of Ice Cloud Microphysical Properties of Deep Convective Systems using Radar Measurements

Science.gov (United States)

Tian, J.; Dong, X.; Xi, B.; Wang, J.; Homeyer, C. R.

2015-12-01

This study presents innovative algorithms for retrieving ice cloud microphysical properties of Deep Convective Systems (DCSs) using Next-Generation Radar (NEXRAD) reflectivity and newly derived empirical relationships from aircraft in situ measurements in Wang et al. (2015) during the Midlatitude Continental Convective Clouds Experiment (MC3E). With composite gridded NEXRAD radar reflectivity, four-dimensional (space-time) ice cloud microphysical properties of DCSs are retrieved, which is not possible from either in situ sampling at a single altitude or from vertical pointing radar measurements. For this study, aircraft in situ measurements provide the best-estimated ice cloud microphysical properties for validating the radar retrievals. Two statistical comparisons between retrieved and aircraft in situ measured ice microphysical properties are conducted from six selected cases during MC3E. For the temporal-averaged method, the averaged ice water content (IWC) and median mass diameter (Dm) from aircraft in situ measurements are 0.50 g m-3 and 1.51 mm, while the retrievals from radar reflectivity have negative biases of 0.12 g m-3 (24%) and 0.02 mm (1.3%) with correlations of 0.71 and 0.48, respectively. For the spatial-averaged method, the IWC retrievals are closer to the aircraft results (0.51 vs. 0.47 g m-3) with a positive bias of 8.5%, whereas the Dm retrievals are larger than the aircraft results (1.65 mm vs. 1.51 mm) with a positive bias of 9.3%. The retrieved IWCs decrease from ~0.6 g m-3 at 5 km to ~0.15 g m-3 at 13 km, and Dm values decrease from ~2 mm to ~0.7 mm at the same levels. In general, the aircraft in situ measured IWC and Dm values at each level are within one standard derivation of retrieved properties. Good agreements between microphysical properties measured from aircraft and retrieved from radar reflectivity measurements indicate the reasonable accuracy of our retrievals.

PHYSICAL CONTACT BETWEEN THE +20 km s{sup −1} CLOUD AND THE GALACTIC CIRCUMNUCLEAR DISK

Energy Technology Data Exchange (ETDEWEB)

Takekawa, Shunya; Oka, Tomoharu [School of Fundamental Science and Technology, Graduate School of Science and Technology, Keio University, 3-14-1 Hiyoshi, Yokohama, Kanagawa 223-8522 (Japan); Tanaka, Kunihiko, E-mail: shunya@aysheaia.phys.keio.ac.jp [Department of Physics, Institute of Science and Technology, Keio University, 3-14-1 Hiyoshi, Yokohama, Kanagawa 223-8522 (Japan)

2017-01-10

This paper reports the discovery of evidence for physical contact between the Galactic circumnuclear disk (CND) and an exterior giant molecular cloud. The central 10 pc of our Galaxy has been imaged in the HCN J  = 1–0, HCO{sup +} J  = 1–0, CS J  = 2–1, H{sup 13}CN J  = 1–0, SiO J  = 2–1, SO N{sub J}  = 2{sub 3}–1{sub 2}, and HC{sub 3}N J  = 11–10 lines using the Nobeyama Radio Observatory 45 m radio telescope. Based on our examination of the position–velocity maps of several high-density probe lines, we have found that an emission “bridge” may be connecting the +20 km s{sup −1} cloud (M–0.13–0.08) and the negative-longitude extension of the CND. Analyses of line intensity ratios imply that the chemical property of the bridge is located between the +20 km s{sup −1} cloud and the CND. We introduce a new interpretation that a part of the CND may be colliding with the 20 km s{sup −1} cloud and the collision may be responsible for the formation of the bridge. Such collisional events could promote mass accretion onto the CND or into the inner ionized cavity, which may be further tested by proper motion studies.

Autoradiographic imaging of the serotonin transporter, using S-[18F](fluoromethyl)-(+)-McN5652 ([18F]Me-McN) in the brains of several animal species

International Nuclear Information System (INIS)

Kretzschmar, M.; Zessin, J.; Brust, P.; Cumming, P.; Bergmann, R.

2002-01-01

The [ 18 F]fluoromethyl analogue of (+)-McN5652 ([ 18 F]Me-McN) was recently proposed as a new potential PET tracer [1]. To further validate its use in PET, we studied the binding of [ 18 F]Me-McN in the brains of rats and pigs using autoradiography. The binding was compared with the uptake of the known 5-HT uptake inhibitor [ 3 H] citalopram [2] and the radioligand (+)-[ 11 C]McN5652. The binding of the three compounds was qualitatively identical in the autoradiograms of the individual brains. Intense labelling was observed in regions known to be serotonin uptake sites. The binding was specifically inhibited, using the 5-HT uptake inhibitors citalopram and fluoxetine. (orig.)

NRS : a system for automated network virtualization in IaaS cloud infrastructures

NARCIS (Netherlands)

Theodorou, D.; Mak, R.H.; Keijser, J.J.; Suerink, T.

2013-01-01

Applications running in multi-tenant IaaS clouds increasingly require networked compute resources, which may belong to several clouds hosted in multiple data-centers. To accommodate these applications network virtualization is necessary, not only for isolation between tenants, but also for

A batch system for HEP applications on a distributed IaaS cloud

International Nuclear Information System (INIS)

Gable, I; Agarwal, A; Anderson, M; Armstrong, P; Fransham, K; Leavett-Brown, D Harris C; Paterson, M; Penfold-Brown, D; Sobie, R J; Vliet, M; Charbonneau, A; Impey, R; Podaima, W

2011-01-01

The emergence of academic and commercial Infrastructure-as-a-Service (IaaS) clouds is opening access to new resources for the HEP community. In this paper we will describe a system we have developed for creating a single dynamic batch environment spanning multiple IaaS clouds of different types (e.g. Nimbus, OpenNebula, Amazon EC2). A HEP user interacting with the system submits a job description file with a pointer to their VM image. VM images can either be created by users directly or provided to the users. We have created a new software component called Cloud Scheduler that detects waiting jobs and boots the user VM required on any one of the available cloud resources. As the user VMs appear, they are attached to the job queues of a central Condor job scheduler, the job scheduler then submits the jobs to the VMs. The number of VMs available to the user is expanded and contracted dynamically depending on the number of user jobs. We present the motivation and design of the system with particular emphasis on Cloud Scheduler. We show that the system provides the ability to exploit academic and commercial cloud sites in a transparent fashion.

Meelis Lao kuulutas eile sõja McDonald'sile / Peeter Raidla

Index Scriptorium Estoniae

Raidla, Peeter, 1955-

2004-01-01

Ärimees Meelis Lao lasi rendivaidlusele viidates sulgeda Viru tänava kiirtoitlustusasutuse McDonald's. Vt. samas: McDonald'si rendivaidlus küünib aastate taha; McDonald's andis asja politseisse; Meelis Lao kannab probleemide lahendaja tiitlit

Brad Patterson, Tom Brooking, and Jim McAloon, Unpacking the Kist: The Scots in New Zealand. McGill-Queen's Studies in Ethnic History Series, No. 2.33. Montreal: McGill-Queen’s University Press, 2013. Pp. 412. ISBN 978-0-7735-4190-0. CAD $100.00.

Directory of Open Access Journals (Sweden)

Seán Gerard Brosnahan

2014-11-01

Full Text Available Brad Patterson, Tom Brooking, and Jim McAloon, Unpacking the Kist: The Scots in New Zealand. McGill-Queen's Studies in Ethnic History Series, No. 2.33. Montreal: McGill-Queen’s University Press, 2013. Pp. 412. ISBN 978-0-7735-4190-0. CAD $100.00.

GPM GROUND VALIDATION SATELLITE SIMULATED ORBITS MC3E V1

Data.gov (United States)

National Aeronautics and Space Administration — The GPM Ground Validation Satellite Simulated Orbits MC3E dataset is available in the Orbital database , which takes account for the atmospheric profiles, the...

Australia as America’s “Little Brother”: A Satiric Reading of John Howard in Andrew McGahan’s Underground

Directory of Open Access Journals (Sweden)

James Dahlstrom

2016-12-01

Full Text Available In this article, I read Andrew McGahan’s novel Underground as a criticism of the Australian government under the leadership of John Howard in the era following the September 11th attacks on the World Trade Center. I draw out the satire of Howard’s perceived role as President George W. Bush’s little brother, which becomes a synecdoche for Australia’s relationship with America. I situate the novel in the context of America’s cyclically neo-colonial history in Australia and draw upon the work of Homi K. Bhabha to suggest that McGahan portrays Australians as an “in-between” people who are guilty of adopting American policies—and thereby relinquishing control of their nation’s sovereignty to America—without compunction. I further suggest that, in the tradition of satire, the novel could be read as a warning to Australians against following the United State too closely. With the rise of the self-proclaimed Islamic State, Australia has witnessed the re-emergence of the political climate that is reflected in Underground, renewing its relevance to contemporary audiences.

Star clouds of Magellan

International Nuclear Information System (INIS)

Tucker, W.

1981-01-01

The Magellanic Clouds are two irregular galaxies belonging to the local group which the Milky Way belongs to. By studying the Clouds, astronomers hope to gain insight into the origin and composition of the Milky Way. The overall structure and dynamics of the Clouds are clearest when studied in radio region of the spectrum. One benefit of directly observing stellar luminosities in the Clouds has been the discovery of the period-luminosity relation. Also, the Clouds are a splendid laboratory for studying stellar evolution. It is believed that both Clouds may be in the very early stage in the development of a regular, symmetric galaxy. This raises a paradox because some of the stars in the star clusters of the Clouds are as old as the oldest stars in our galaxy. An explanation for this is given. The low velocity of the Clouds with respect to the center of the Milky Way shows they must be bound to it by gravity. Theories are given on how the Magellanic Clouds became associated with the galaxy. According to current ideas the Clouds orbits will decay and they will spiral into the Galaxy

Lessons learnt from Fukushima Accident - What did McMaster Undergraduate Students learn?

Energy Technology Data Exchange (ETDEWEB)

Nagasaki, S., E-mail: nagasas@mcmaster.ca [McMaster University, Hamilton, ON, (Canada)

2015-07-01

Nuclear communities not only in Japan but also around the world learnt a lot of lessons from the Fukushima accident. The direct cause of the accident from the viewpoint of traditional engineering is clear, and as a result various measures have been implemented around the world. The accident also provides many insights into the relationship between traditional engineering and Japanese society. In this paper, the root causes of the accident were studied by applying a psychological model for evocation of an individual's anxiety related to social affairs [1] to the discussions in an undergraduate course at McMaster University. In the last section, the challenges, which McMaster students considered Japanese nuclear community is now facing and Canadian nuclear community can contribute to in future, are summarized. (author)

Improving HelioClim-3 estimates of surface solar irradiance using the McClear clear-sky model and recent advances in atmosphere composition

Directory of Open Access Journals (Sweden)

Z. Qu

2014-11-01

Full Text Available The HelioClim-3 database (HC3v3 provides records of surface solar irradiation every 15 min, estimated by processing images from the geostationary meteorological Meteosat satellites using climatological data sets of the atmospheric Linke turbidity factor. This technical note proposes a method to improve a posteriori HC3v3 by combining it with data records of the irradiation under clear skies from the new McClear clear-sky model, whose inputs are the advanced global aerosol property forecasts and physically consistent total column content in water vapour and ozone produced by the MACC (Monitoring Atmosphere Composition and Climate projects. The method is validated by comparison with a series of ground measurements for 15 min and 1 h for 6 stations and for daily irradiation for 23 stations. The correlation coefficient is large, greater than respectively 0.92, 0.94, and 0.97, for 15 min, 1 h and daily irradiation. The bias ranges from −4 to 4% of the mean observed irradiation for most sites. The relative root mean square difference (RMSD varies between 14 and 38% for 15 min, 12 and 33% for 1 h irradiation, and 6 and 20% for daily irradiation. As a rule of thumb, the farther from the nadir of the Meteosat satellite located at latitude 0° and longitude 0°, and the greater the occurrence of fragmented cloud cover, the greater the relative RMSD. The method improves HC3v3 in most cases, and with no degradation in the others. A systematic correction of HC3v3 with McClear is recommended.

Toward a web-based real-time radiation treatment planning system in a cloud computing environment

International Nuclear Information System (INIS)

Na, Yong Hum; Kapp, Daniel S; Xing, Lei; Suh, Tae-Suk

2013-01-01

To exploit the potential dosimetric advantages of intensity modulated radiation therapy (IMRT) and volumetric modulated arc therapy (VMAT), an in-depth approach is required to provide efficient computing methods. This needs to incorporate clinically related organ specific constraints, Monte Carlo (MC) dose calculations, and large-scale plan optimization. This paper describes our first steps toward a web-based real-time radiation treatment planning system in a cloud computing environment (CCE). The Amazon Elastic Compute Cloud (EC2) with a master node (named m2.xlarge containing 17.1 GB of memory, two virtual cores with 3.25 EC2 Compute Units each, 420 GB of instance storage, 64-bit platform) is used as the backbone of cloud computing for dose calculation and plan optimization. The master node is able to scale the workers on an ‘on-demand’ basis. MC dose calculation is employed to generate accurate beamlet dose kernels by parallel tasks. The intensity modulation optimization uses total-variation regularization (TVR) and generates piecewise constant fluence maps for each initial beam direction in a distributed manner over the CCE. The optimized fluence maps are segmented into deliverable apertures. The shape of each aperture is iteratively rectified to be a sequence of arcs using the manufacture’s constraints. The output plan file from the EC2 is sent to the simple storage service. Three de-identified clinical cancer treatment plans have been studied for evaluating the performance of the new planning platform with 6 MV flattening filter free beams (40 × 40 cm 2 ) from the Varian TrueBeam TM STx linear accelerator. A CCE leads to speed-ups of up to 14-fold for both dose kernel calculations and plan optimizations in the head and neck, lung, and prostate cancer cases considered in this study. The proposed system relies on a CCE that is able to provide an infrastructure for parallel and distributed computing. The resultant plans from the cloud computing are

Hybrid Pluggable Processing Pipeline (HyP3): Programmatic Access to Cloud-Based Processing of SAR Data

Science.gov (United States)

Weeden, R.; Horn, W. B.; Dimarchi, H.; Arko, S. A.; Hogenson, K.

2017-12-01

A problem often faced by Earth science researchers is the question of how to scale algorithms that were developed against few datasets and take them to regional or global scales. This problem only gets worse as we look to a future with larger and larger datasets becoming available. One significant hurdle can be having the processing and storage resources available for such a task, not to mention the administration of those resources. As a processing environment, the cloud offers nearly unlimited potential for compute and storage, with limited administration required. The goal of the Hybrid Pluggable Processing Pipeline (HyP3) project was to demonstrate the utility of the Amazon cloud to process large amounts of data quickly and cost effectively. Principally built by three undergraduate students at the ASF DAAC, the HyP3 system relies on core Amazon cloud services such as Lambda, Relational Database Service (RDS), Elastic Compute Cloud (EC2), Simple Storage Service (S3), and Elastic Beanstalk. HyP3 provides an Application Programming Interface (API) through which users can programmatically interface with the HyP3 system; allowing them to monitor and control processing jobs running in HyP3, and retrieve the generated HyP3 products when completed. This presentation will focus on the development techniques and enabling technologies that were used in developing the HyP3 system. Data and process flow, from new subscription through to order completion will be shown, highlighting the benefits of the cloud for each step. Because the HyP3 system can be accessed directly from a user's Python scripts, powerful applications leveraging SAR products can be put together fairly easily. This is the true power of HyP3; allowing people to programmatically leverage the power of the cloud.

Functional Characterization of MC1R-TUBB3 Intergenic Splice Variants of the Human Melanocortin 1 Receptor.

Directory of Open Access Journals (Sweden)

Cecilia Herraiz

Full Text Available The melanocortin 1 receptor gene (MC1R expressed in melanocytes is a major determinant of skin pigmentation. It encodes a Gs protein-coupled receptor activated by α-melanocyte stimulating hormone (αMSH. Human MC1R has an inefficient poly(A site allowing intergenic splicing with its downstream neighbour Tubulin-β-III (TUBB3. Intergenic splicing produces two MC1R isoforms, designated Iso1 and Iso2, bearing the complete seven transmembrane helices from MC1R fused to TUBB3-derived C-terminal extensions, in-frame for Iso1 and out-of-frame for Iso2. It has been reported that exposure to ultraviolet radiation (UVR might promote an isoform switch from canonical MC1R (MC1R-001 to the MC1R-TUBB3 chimeras, which might lead to novel phenotypes required for tanning. We expressed the Flag epitope-tagged intergenic isoforms in heterologous HEK293T cells and human melanoma cells, for functional characterization. Iso1 was expressed with the expected size. Iso2 yielded a doublet of Mr significantly lower than predicted, and impaired intracellular stability. Although Iso1- and Iso2 bound radiolabelled agonist with the same affinity as MC1R-001, their plasma membrane expression was strongly reduced. Decreased surface expression mostly resulted from aberrant forward trafficking, rather than high rates of endocytosis. Functional coupling of both isoforms to cAMP was lower than wild-type, but ERK activation upon binding of αMSH was unimpaired, suggesting imbalanced signaling from the splice variants. Heterodimerization of differentially labelled MC1R-001 with the splicing isoforms analyzed by co-immunoprecipitation was efficient and caused decreased surface expression of binding sites. Thus, UVR-induced MC1R isoforms might contribute to fine-tune the tanning response by modulating MC1R-001 availability and functional parameters.

Insights on the Feasibility, Modeling and Field Testing of Cirrus Cloud Thinning from Satellite Remote Sensing

Science.gov (United States)

Mitchell, D. L.; Garnier, A.; Mejia, J.; Avery, M. A.; Erfani, E.

2016-12-01

To date, it is not clear whether the climate intervention method known as cirrus cloud thinning (CCT) can be viable since it requires cirrus clouds to form through homogeneous ice nucleation (henceforth hom) and some recent GCM studies predict cirrus are formed primarily through heterogeneous ice nucleation (henceforth het). A new CALIPSO infrared retrieval method has been developed for single-layer cirrus cloud that measures the temperature dependence of their layer-averaged number concentration N, effective diameter De and ice water content for optical depths (OD) between 0.3 and 3.0. Based on N, the prevailing ice nucleation mechanism (hom or het) can be estimated as a function of temperature, season, latitude and surface type. These satellite results indicate that seeding cirrus clouds at high latitudes during winter may produce significant global surface cooling. This is because hom often appears to dominate over land during winter north of 30°N latitude while the same appears true for most of the Southern Hemisphere (south of 30°S) during all seasons. Moreover, the sampled cirrus cloud frequency of occurrence in the Arctic is at least twice as large during winter relative to other seasons, while frequency of occurrence in the Antarctic peaks in the spring and is second-highest during winter. During Arctic winter, a combination of frequent hom cirrus, maximum cirrus coverage and an extreme or absent sun angle produces the maximum seasonal cirrus net radiative forcing (warming). Thus a reduction in OD and coverage (via CCT) for these cirrus clouds could yield a significant net cooling effect. From these CALIPSO retrievals, De-T relationships are generated as a function of season, latitude and surface type (land vs. ocean). These will be used in CAM5 to estimate De and the ice fall speed, from which the cirrus radiative forcing will be estimated during winter north of 30°latitude, where hom cirrus are common. Another CAM5 simulation will replace the hom

Final Technical Report for Project 'Improving the Simulation of Arctic Clouds in CCSM3 (SGER Award)'

International Nuclear Information System (INIS)

Vavrus, Stephen J.

2008-01-01

This project has focused on the simulation of Arctic clouds in CCSM3 and how the modeled cloud amount (and climate) can be improved substantially by altering the parameterized low cloud fraction. The new formula, dubbed 'freeezedry', alleviates the bias of excessive low clouds during polar winter by reducing the cloud amount under very dry conditions. During winter, freezedry decreases the low cloud amount over the coldest regions in high latitudes by over 50% locally and more than 30% averaged across the Arctic (Fig. 1). The cloud reduction causes an Arctic-wide drop of 15 W m -2 in surface cloud radiative forcing (CRF) during winter and about a 50% decrease in mean annual Arctic CRF. Consequently, wintertime surface temperatures fall by up to 4 K on land and 2-8 K over the Arctic Ocean, thus significantly reducing the model's pronounced warm bias (Fig. 1). While improving the polar climate simulation in CCSM3, freezedry has virtually no influence outside of very cold regions (Fig. 2) or during summer (Fig. 3), which are space and time domains that were not targeted. Furthermore, the simplicity of this parameterization allows it to be readily incorporated into other GCMs, many of which also suffer from excessive wintertime polar cloudiness, based on the results from the CMIP3 archive (Vavrus et al., 2008). Freezedry also affects CCSM3's sensitivity to greenhouse forcing. In a transient-CO 2 experiment, the model version with freezedry warms up to 20% less in the North Polar and South Polar regions (1.5 K and 0.5 K smaller warming, respectively) (Fig. 4). Paradoxically, the muted high-latitude response occurs despite a much larger increase in cloud amount with freezedry during non-summer months (when clouds warm the surface), apparently because of the colder modern reference climate. These results of the freezedry parameterization have recently been published (Vavrus and D. Waliser, 2008: An improved parameterization for simulating Arctic cloud amount in the CCSM3

AIRS-CloudSat cloud mask, radar reflectivities, and cloud classification matchups V3.2

Data.gov (United States)

National Aeronautics and Space Administration — This is AIRS-CloudSat collocated subset, in NetCDF 4 format. These data contain collocated: AIRS Level 1b radiances spectra, CloudSat radar reflectivities, and MODIS...

3D Viewer Platform of Cloud Clustering Management System: Google Map 3D

Science.gov (United States)

Choi, Sung-Ja; Lee, Gang-Soo

The new management system of framework for cloud envrionemnt is needed by the platfrom of convergence according to computing environments of changes. A ISV and small business model is hard to adapt management system of platform which is offered from super business. This article suggest the clustering management system of cloud computing envirionments for ISV and a man of enterprise in small business model. It applies the 3D viewer adapt from map3D & earth of google. It is called 3DV_CCMS as expand the CCMS[1].

Cloud type comparisons of AIRS, CloudSat, and CALIPSO cloud height and amount

Directory of Open Access Journals (Sweden)

B. H. Kahn

2008-03-01

Full Text Available The precision of the two-layer cloud height fields derived from the Atmospheric Infrared Sounder (AIRS is explored and quantified for a five-day set of observations. Coincident profiles of vertical cloud structure by CloudSat, a 94 GHz profiling radar, and the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO, are compared to AIRS for a wide range of cloud types. Bias and variability in cloud height differences are shown to have dependence on cloud type, height, and amount, as well as whether CloudSat or CALIPSO is used as the comparison standard. The CloudSat-AIRS biases and variability range from −4.3 to 0.5±1.2–3.6 km for all cloud types. Likewise, the CALIPSO-AIRS biases range from 0.6–3.0±1.2–3.6 km (−5.8 to −0.2±0.5–2.7 km for clouds ≥7 km (<7 km. The upper layer of AIRS has the greatest sensitivity to Altocumulus, Altostratus, Cirrus, Cumulonimbus, and Nimbostratus, whereas the lower layer has the greatest sensitivity to Cumulus and Stratocumulus. Although the bias and variability generally decrease with increasing cloud amount, the ability of AIRS to constrain cloud occurrence, height, and amount is demonstrated across all cloud types for many geophysical conditions. In particular, skill is demonstrated for thin Cirrus, as well as some Cumulus and Stratocumulus, cloud types infrared sounders typically struggle to quantify. Furthermore, some improvements in the AIRS Version 5 operational retrieval algorithm are demonstrated. However, limitations in AIRS cloud retrievals are also revealed, including the existence of spurious Cirrus near the tropopause and low cloud layers within Cumulonimbus and Nimbostratus clouds. Likely causes of spurious clouds are identified and the potential for further improvement is discussed.

Cloud Processed CCN Suppress Stratus Cloud Drizzle

Science.gov (United States)

Hudson, J. G.; Noble, S. R., Jr.

2017-12-01

Conversion of sulfur dioxide to sulfate within cloud droplets increases the sizes and decreases the critical supersaturation, Sc, of cloud residual particles that had nucleated the droplets. Since other particles remain at the same sizes and Sc a size and Sc gap is often observed. Hudson et al. (2015) showed higher cloud droplet concentrations (Nc) in stratus clouds associated with bimodal high-resolution CCN spectra from the DRI CCN spectrometer compared to clouds associated with unimodal CCN spectra (not cloud processed). Here we show that CCN spectral shape (bimodal or unimodal) affects all aspects of stratus cloud microphysics and drizzle. Panel A shows mean differential cloud droplet spectra that have been divided according to traditional slopes, k, of the 131 measured CCN spectra in the Marine Stratus/Stratocumulus Experiment (MASE) off the Central California coast. K is generally high within the supersaturation, S, range of stratus clouds (< 0.5%). Because cloud processing decreases Sc of some particles, it reduces k. Panel A shows higher concentrations of small cloud droplets apparently grown on lower k CCN than clouds grown on higher k CCN. At small droplet sizes the concentrations follow the k order of the legend, black, red, green, blue (lowest to highest k). Above 13 µm diameter the lines cross and the hierarchy reverses so that blue (highest k) has the highest concentrations followed by green, red and black (lowest k). This reversed hierarchy continues into the drizzle size range (panel B) where the most drizzle drops, Nd, are in clouds grown on the least cloud-processed CCN (blue), while clouds grown on the most processed CCN (black) have the lowest Nd. Suppression of stratus cloud drizzle by cloud processing is an additional 2nd indirect aerosol effect (IAE) that along with the enhancement of 1st IAE by higher Nc (panel A) are above and beyond original IAE. However, further similar analysis is needed in other cloud regimes to determine if MASE was

Behavior Life Style Analysis for Mobile Sensory Data in Cloud Computing through MapReduce

Directory of Open Access Journals (Sweden)

Shujaat Hussain

2014-11-01

Full Text Available Cloud computing has revolutionized healthcare in today’s world as it can be seamlessly integrated into a mobile application and sensor devices. The sensory data is then transferred from these devices to the public and private clouds. In this paper, a hybrid and distributed environment is built which is capable of collecting data from the mobile phone application and store it in the cloud. We developed an activity recognition application and transfer the data to the cloud for further processing. Big data technology Hadoop MapReduce is employed to analyze the data and create user timeline of user’s activities. These activities are visualized to find useful health analytics and trends. In this paper a big data solution is proposed to analyze the sensory data and give insights into user behavior and lifestyle trends.

Eccentric Voices and the Representation of Vocal Virtuosity in Fiction: James McCourt’s Mawrdew Czgowchwz

Directory of Open Access Journals (Sweden)

Marcin Stawiarski

2016-06-01

Full Text Available This paper examines the representation of vocal virtuosity in fiction. It focuses on the concept of voice as it is represented in a work of fiction through musical eccentricity. The paper centres on James McCourt’s Mawrdew Czgowchwz (1975. James McCourt’s novel tells the story of an opera singer, Mawrdew Czgowchwz. In the novel, the voice is related to extravagance and fanaticism, so that it relates to violence and conflict. In McCourt’s novel, the stylistic features of the text show a hyperbolic use of language resorting to Rabelaisian lists, foreign vocabulary, neologisms, or nonce-words, which create tongue-twister cornucopia effects of linguistic musicality. The paper aims to demonstrate that (a the mode of eccentricity is a fundamental mode of representing music in literature; (b eccentricity rubs off on the very structure of the text, so that it leads to singular forms of operatic musicalization of fiction and musicalized writing; (c the voice ends up turning into a fetish object.

A novel chimeric peptide binds MC3T3‑E1 cells to titanium and enhances their proliferation and differentiation.

Science.gov (United States)

Wang, Dan; Liao, Xiaofu; Qin, Xu; Shi, Wei; Zhou, Bin

2013-05-01

Previous studies have demonstrated that the modification of the titanium (Ti) surface of an implant with RGD (Arg‑Gly‑Asp) promotes the activity of osteoblasts. A novel Ti‑binding peptide, minTBP‑1, and a chimeric peptide, minTBP‑1‑PRGDN, have been synthesized to assist the fixing of RGD to Ti. In our previous study, minTBP‑1‑PRGDN demonstrated favorable affinity for Ti surfaces and facilitated the adhesion of MC3T3‑E1 cells. The aim of the present study was to evaluate the effect of this chimeric peptide on the proliferation and differentiation of MC3T3‑E1 cells. For this purpose, MC3T3‑E1 cells were cultured and differentiation was induced on Ti discs precoated with minTBP‑1‑PRGDN, minTBP‑1 or PRGDN. The MC3T3‑E1 cells on the minTBP‑1‑PRGDN‑precoated Ti disc were observed to exhibit the highest cell number after 24 h and alkaline phosphatase levels in all groups increased in a time‑dependent manner. In addition, marked expression of osteogenic marker genes [osteopontin (OPN) and osteocalcin (OC)] was detected on minTBP‑1‑PRGDN/Ti at day 14. Mineralized deposits on minTBP‑1‑PRGDN/Ti presented the maximal average area and the highest number of deposits was observed on PRGDN/Ti. The present study indicates that minTBP‑1‑PRGDN may enhance and accelerate the activities of MC3T3‑E1 cells on Ti, however, its role in vivo must be determined by further studies.

Generating Free-Form Grid Truss Structures from 3D Scanned Point Clouds

Directory of Open Access Journals (Sweden)

Hui Ding

2017-01-01

Full Text Available Reconstruction, according to physical shape, is a novel way to generate free-form grid truss structures. 3D scanning is an effective means of acquiring physical form information and it generates dense point clouds on surfaces of objects. However, generating grid truss structures from point clouds is still a challenge. Based on the advancing front technique (AFT which is widely used in Finite Element Method (FEM, a scheme for generating grid truss structures from 3D scanned point clouds is proposed in this paper. Based on the characteristics of point cloud data, the search box is adopted to reduce the search space in grid generating. A front advancing procedure suit for point clouds is established. Delaunay method and Laplacian method are used to improve the quality of the generated grids, and an adjustment strategy that locates grid nodes at appointed places is proposed. Several examples of generating grid truss structures from 3D scanned point clouds of seashells are carried out to verify the proposed scheme. Physical models of the grid truss structures generated in the examples are manufactured by 3D print, which solidifies the feasibility of the scheme.

McMAC: Towards a MAC Protocol with Multi-Constrained QoS Provisioning for Diverse Traffic in Wireless Body Area Networks

Directory of Open Access Journals (Sweden)

Muhammad Mostafa Monowar

2012-11-01

Full Text Available The emergence of heterogeneous applications with diverse requirements forresource-constrained Wireless Body Area Networks (WBANs poses significant challengesfor provisioning Quality of Service (QoS with multi-constraints (delay and reliability whilepreserving energy efficiency. To address such challenges, this paper proposes McMAC,a MAC protocol with multi-constrained QoS provisioning for diverse traffic classes inWBANs. McMAC classifies traffic based on their multi-constrained QoS demands andintroduces a novel superframe structure based on the "transmit-whenever-appropriate"principle, which allows diverse periods for diverse traffic classes according to their respectiveQoS requirements. Furthermore, a novel emergency packet handling mechanism is proposedto ensure packet delivery with the least possible delay and the highest reliability. McMACis also modeled analytically, and extensive simulations were performed to evaluate itsperformance. The results reveal that McMAC achieves the desired delay and reliabilityguarantee according to the requirements of a particular traffic class while achieving energyefficiency.

McMAC: towards a MAC protocol with multi-constrained QoS provisioning for diverse traffic in Wireless Body Area Networks.

Science.gov (United States)

Monowar, Muhammad Mostafa; Hassan, Mohammad Mehedi; Bajaber, Fuad; Al-Hussein, Musaed; Alamri, Atif

2012-11-12

The emergence of heterogeneous applications with diverse requirements for resource-constrained Wireless Body Area Networks (WBANs) poses significant challenges for provisioning Quality of Service (QoS) with multi-constraints (delay and reliability) while preserving energy efficiency. To address such challenges, this paper proposes McMAC,a MAC protocol with multi-constrained QoS provisioning for diverse traffic classes in WBANs. McMAC classifies traffic based on their multi-constrained QoS demands and introduces a novel superframe structure based on the "transmit-whenever-appropriate"principle, which allows diverse periods for diverse traffic classes according to their respective QoS requirements. Furthermore, a novel emergency packet handling mechanism is proposedto ensure packet delivery with the least possible delay and the highest reliability. McMAC is also modeled analytically, and extensive simulations were performed to evaluate its performance. The results reveal that McMAC achieves the desired delay and reliability guarantee according to the requirements of a particular traffic class while achieving energy efficiency.

4CaaSt : Comprehensive management of Cloud services through a PaaS

NARCIS (Netherlands)

Garcia-Gomez, S.; Lelli, F.; Eschriche-Vicente, M.; Arozarena-Llopis, P.; Taher, Y.; Momm, C.; Spriestersbach, A.; Jimenez-Ganan, M.; Le Jeune, G.; Dao, M.; Carrie, S.P.; Niemoller, J.; Mazmanov, D.; Biro, J.; Giesmann, A.; Junker, F.

2012-01-01

The 4CaaSt project aims at developing a PaaS framework that enables flexible definition, marketing, deployment and management of Cloud-based services and applications. The major innovations proposed by 4CaaSt are the blueprint and its lifecycle management, a one stop shop for Cloud services and a

ATLAS Cloud R&D

Science.gov (United States)

Panitkin, Sergey; Barreiro Megino, Fernando; Caballero Bejar, Jose; Benjamin, Doug; Di Girolamo, Alessandro; Gable, Ian; Hendrix, Val; Hover, John; Kucharczyk, Katarzyna; Medrano Llamas, Ramon; Love, Peter; Ohman, Henrik; Paterson, Michael; Sobie, Randall; Taylor, Ryan; Walker, Rodney; Zaytsev, Alexander; Atlas Collaboration

2014-06-01

The computing model of the ATLAS experiment was designed around the concept of grid computing and, since the start of data taking, this model has proven very successful. However, new cloud computing technologies bring attractive features to improve the operations and elasticity of scientific distributed computing. ATLAS sees grid and cloud computing as complementary technologies that will coexist at different levels of resource abstraction, and two years ago created an R&D working group to investigate the different integration scenarios. The ATLAS Cloud Computing R&D has been able to demonstrate the feasibility of offloading work from grid to cloud sites and, as of today, is able to integrate transparently various cloud resources into the PanDA workload management system. The ATLAS Cloud Computing R&D is operating various PanDA queues on private and public resources and has provided several hundred thousand CPU days to the experiment. As a result, the ATLAS Cloud Computing R&D group has gained a significant insight into the cloud computing landscape and has identified points that still need to be addressed in order to fully utilize this technology. This contribution will explain the cloud integration models that are being evaluated and will discuss ATLAS' learning during the collaboration with leading commercial and academic cloud providers.

Relationship between cloud radiative forcing, cloud fraction and cloud albedo, and new surface-based approach for determining cloud albedo

OpenAIRE

Y. Liu; W. Wu; M. P. Jensen; T. Toto

2011-01-01

This paper focuses on three interconnected topics: (1) quantitative relationship between surface shortwave cloud radiative forcing, cloud fraction, and cloud albedo; (2) surfaced-based approach for measuring cloud albedo; (3) multiscale (diurnal, annual and inter-annual) variations and covariations of surface shortwave cloud radiative forcing, cloud fraction, and cloud albedo. An analytical expression is first derived to quantify the relationship between cloud radiative forcing, cloud fractio...

O trabalho dentro da loja de McDonald´s: regimes de visibilidade que revelam a imaterialidade da produção | Work in McDonald´s: regimes of visibility revealing the immateriality of production

Directory of Open Access Journals (Sweden)

Viviane Riegel

2010-03-01

Abstract McDonald's production system includes a variety of firms and processes. The goods arrive at their stores for final preparation and assembly that take place in procedures established in manuals, constantly accelerated, following the logic that gives visibility to the brand’s experience. The aim of this paper therefore is to study how work is represented inside McDonald's stores, through arrangements of visibility that, at the check-out, erase the materiality of food production and build the immateriality of the experience of packaged goods for consumption. To this end, elements of discourse analysis following the French approach will be used on McDonald's images. Keywords work; control process; visibility regimes; immateriality; experience.

A Robust Multi-Scale Modeling System for the Study of Cloud and Precipitation Processes

Science.gov (United States)

Tao, Wei-Kuo

2012-01-01

During the past decade, numerical weather and global non-hydrostatic models have started using more complex microphysical schemes originally developed for high resolution cloud resolving models (CRMs) with 1-2 km or less horizontal resolutions. These microphysical schemes affect the dynamic through the release of latent heat (buoyancy loading and pressure gradient) the radiation through the cloud coverage (vertical distribution of cloud species), and surface processes through rainfall (both amount and intensity). Recently, several major improvements of ice microphysical processes (or schemes) have been developed for cloud-resolving model (Goddard Cumulus Ensemble, GCE, model) and regional scale (Weather Research and Forecast, WRF) model. These improvements include an improved 3-ICE (cloud ice, snow and graupel) scheme (Lang et al. 2010); a 4-ICE (cloud ice, snow, graupel and hail) scheme and a spectral bin microphysics scheme and two different two-moment microphysics schemes. The performance of these schemes has been evaluated by using observational data from TRMM and other major field campaigns. In this talk, we will present the high-resolution (1 km) GeE and WRF model simulations and compared the simulated model results with observation from recent field campaigns [i.e., midlatitude continental spring season (MC3E; 2010), high latitude cold-season (C3VP, 2007; GCPEx, 2012), and tropical oceanic (TWP-ICE, 2006)].

The virtual machine (VM) scaler: an infrastructure manager supporting environmental modeling on IaaS clouds

Science.gov (United States)

Infrastructure-as-a-service (IaaS) clouds provide a new medium for deployment of environmental modeling applications. Harnessing advancements in virtualization, IaaS clouds can provide dynamic scalable infrastructure to better support scientific modeling computational demands. Providing scientific m...

The Application of the Technology of 3D Satellite Cloud Imaging in Virtual Reality Simulation

Directory of Open Access Journals (Sweden)

Xiao-fang Xie

2007-05-01

Full Text Available Using satellite cloud images to simulate clouds is one of the new visual simulation technologies in Virtual Reality (VR. Taking the original data of satellite cloud images as the source, this paper depicts specifically the technology of 3D satellite cloud imaging through the transforming of coordinates and projection, creating a DEM (Digital Elevation Model of cloud imaging and 3D simulation. A Mercator projection was introduced to create a cloud image DEM, while solutions for geodetic problems were introduced to calculate distances, and the outer-trajectory science of rockets was introduced to obtain the elevation of clouds. For demonstration, we report on a computer program to simulate the 3D satellite cloud images.

Effects of 3-D clouds on atmospheric transmission of solar radiation: Cloud type dependencies inferred from A-train satellite data

Science.gov (United States)

Ham, Seung-Hee; Kato, Seiji; Barker, Howard W.; Rose, Fred G.; Sun-Mack, Sunny

2014-01-01

Three-dimensional (3-D) effects on broadband shortwave top of atmosphere (TOA) nadir radiance, atmospheric absorption, and surface irradiance are examined using 3-D cloud fields obtained from one hour's worth of A-train satellite observations and one-dimensional (1-D) independent column approximation (ICA) and full 3-D radiative transfer simulations. The 3-D minus ICA differences in TOA nadir radiance multiplied by π, atmospheric absorption, and surface downwelling irradiance, denoted as πΔI, ΔA, and ΔT, respectively, are analyzed by cloud type. At the 1 km pixel scale, πΔI, ΔA, and ΔT exhibit poor spatial correlation. Once averaged with a moving window, however, better linear relationships among πΔI, ΔA, and ΔT emerge, especially for moving windows larger than 5 km and large θ0. While cloud properties and solar geometry are shown to influence the relationships amongst πΔI, ΔA, and ΔT, once they are separated by cloud type, their linear relationships become much stronger. This suggests that ICA biases in surface irradiance and atmospheric absorption can be approximated based on ICA biases in nadir radiance as a function of cloud type.

Helix Nebula and CERN: A Symbiotic approach to exploiting commercial clouds

International Nuclear Information System (INIS)

Megino, Fernando H Barreiro; Jones, Robert; Llamas, Ramón Medrano; Ster, Daniel van der; Kucharczyk, Katarzyna

2014-01-01

The recent paradigm shift toward cloud computing in IT, and general interest in 'Big Data' in particular, have demonstrated that the computing requirements of HEP are no longer globally unique. Indeed, the CERN IT department and LHC experiments have already made significant R and D investments in delivering and exploiting cloud computing resources. While a number of technical evaluations of interesting commercial offerings from global IT enterprises have been performed by various physics labs, further technical, security, sociological, and legal issues need to be address before their large-scale adoption by the research community can be envisaged. Helix Nebula – the Science Cloud is an initiative that explores these questions by joining the forces of three European research institutes (CERN, ESA and EMBL) with leading European commercial IT enterprises. The goals of Helix Nebula are to establish a cloud platform federating multiple commercial cloud providers, along with new business models, which can sustain the cloud marketplace for years to come. This contribution will summarize the participation of CERN in Helix Nebula. We will explain CERN's flagship use-case and the model used to integrate several cloud providers with an LHC experiment's workload management system. During the first proof of concept, this project contributed over 40.000 CPU-days of Monte Carlo production throughput to the ATLAS experiment with marginal manpower required. CERN's experience, together with that of ESA and EMBL, is providing a great insight into the cloud computing industry and highlighted several challenges that are being tackled in order to ease the export of the scientific workloads to the cloud environments.

ANCS: Achieving QoS through Dynamic Allocation of Network Resources in Virtualized Clouds

Directory of Open Access Journals (Sweden)

Cheol-Ho Hong

2016-01-01

Full Text Available To meet the various requirements of cloud computing users, research on guaranteeing Quality of Service (QoS is gaining widespread attention in the field of cloud computing. However, as cloud computing platforms adopt virtualization as an enabling technology, it becomes challenging to distribute system resources to each user according to the diverse requirements. Although ample research has been conducted in order to meet QoS requirements, the proposed solutions lack simultaneous support for multiple policies, degrade the aggregated throughput of network resources, and incur CPU overhead. In this paper, we propose a new mechanism, called ANCS (Advanced Network Credit Scheduler, to guarantee QoS through dynamic allocation of network resources in virtualization. To meet the various network demands of cloud users, ANCS aims to concurrently provide multiple performance policies; these include weight-based proportional sharing, minimum bandwidth reservation, and maximum bandwidth limitation. In addition, ANCS develops an efficient work-conserving scheduling method for maximizing network resource utilization. Finally, ANCS can achieve low CPU overhead via its lightweight design, which is important for practical deployment.

Numerical Simulation on a Possible Formation Mechanism of Interplanetary Magnetic Cloud Boundaries

Science.gov (United States)

Fan, Quan-Lin; Wei, Feng-Si; Feng, Xue-Shang

2003-08-01

The formation mechanism of the interplanetary magnetic cloud (MC) boundaries is numerically investigated by simulating the interactions between an MC of some initial momentum and a local interplanetary current sheet. The compressible 2.5D MHD equations are solved. Results show that the magnetic reconnection process is a possible formation mechanism when an MC interacts with a surrounding current sheet. A number of interesting features are found. For instance, the front boundary of the MCs is a magnetic reconnection boundary that could be caused by a driven reconnection ahead of the cloud, and the tail boundary might be caused by the driving of the entrained flow as a result of the Bernoulli principle. Analysis of the magnetic field and plasma data demonstrates that at these two boundaries appear large value of the plasma parameter β, clear increase of plasma temperature and density, distinct decrease of magnetic magnitude, and a transition of magnetic field direction of about 180 degrees. The outcome of the present simulation agrees qualitatively with the observational results on MC boundary inferred from IMP-8, etc. The project supported by National Natural Science Foundation of China under Grant Nos. 40104006, 49925412, and 49990450

The McDonald’s Inverse Weibull Distribution

Directory of Open Access Journals (Sweden)

Saman Hanif Shahbaz

2016-12-01

Full Text Available We have proposed a new Inverse Weibull distribution by using the generalized Beta distribution of McDonald (1984. Basic properties of the proposed distribution has been studied. Parameter estimation has been discussed alongside an illustrative example.

IMAGE TO POINT CLOUD METHOD OF 3D-MODELING

Directory of Open Access Journals (Sweden)

A. G. Chibunichev

2012-07-01

Full Text Available This article describes the method of constructing 3D models of objects (buildings, monuments based on digital images and a point cloud obtained by terrestrial laser scanner. The first step is the automated determination of exterior orientation parameters of digital image. We have to find the corresponding points of the image and point cloud to provide this operation. Before the corresponding points searching quasi image of point cloud is generated. After that SIFT algorithm is applied to quasi image and real image. SIFT algorithm allows to find corresponding points. Exterior orientation parameters of image are calculated from corresponding points. The second step is construction of the vector object model. Vectorization is performed by operator of PC in an interactive mode using single image. Spatial coordinates of the model are calculated automatically by cloud points. In addition, there is automatic edge detection with interactive editing available. Edge detection is performed on point cloud and on image with subsequent identification of correct edges. Experimental studies of the method have demonstrated its efficiency in case of building facade modeling.

FPFH-based graph matching for 3D point cloud registration

Science.gov (United States)

Zhao, Jiapeng; Li, Chen; Tian, Lihua; Zhu, Jihua

2018-04-01

Correspondence detection is a vital step in point cloud registration and it can help getting a reliable initial alignment. In this paper, we put forward an advanced point feature-based graph matching algorithm to solve the initial alignment problem of rigid 3D point cloud registration with partial overlap. Specifically, Fast Point Feature Histograms are used to determine the initial possible correspondences firstly. Next, a new objective function is provided to make the graph matching more suitable for partially overlapping point cloud. The objective function is optimized by the simulated annealing algorithm for final group of correct correspondences. Finally, we present a novel set partitioning method which can transform the NP-hard optimization problem into a O(n3)-solvable one. Experiments on the Stanford and UWA public data sets indicates that our method can obtain better result in terms of both accuracy and time cost compared with other point cloud registration methods.

Sulfate and sulfide sulfur isotopes (δ34S and δ33S) measured by solution and laser ablation MC-ICP-MS: An enhanced approach using external correction

Science.gov (United States)

Pribil, Michael; Ridley, William I.; Emsbo, Poul

2015-01-01

Isotope ratio measurements using a multi-collector inductively coupled plasma mass spectrometer (MC-ICP-MS) commonly use standard-sample bracketing with a single isotope standard for mass bias correction for elements with narrow-range isotope systems measured by MC-ICP-MS, e.g. Cu, Fe, Zn, and Hg. However, sulfur (S) isotopic composition (δ34S) in nature can range from at least − 40 to + 40‰, potentially exceeding the ability of standard-sample bracketing using a single sulfur isotope standard to accurately correct for mass bias. Isotopic fractionation via solution and laser ablation introduction was determined during sulfate sulfur (Ssulfate) isotope measurements. An external isotope calibration curve was constructed using in-house and National Institute of Standards and Technology (NIST) Ssulfate isotope reference materials (RM) in an attempt to correct for the difference. The ability of external isotope correction for Ssulfate isotope measurements was evaluated by analyzing NIST and United States Geological Survey (USGS) Ssulfate isotope reference materials as unknowns. Differences in δ34Ssulfate between standard-sample bracketing and standard-sample bracketing with external isotope correction for sulfate samples ranged from 0.72‰ to 2.35‰ over a δ34S range of 1.40‰ to 21.17‰. No isotopic differences were observed when analyzing Ssulfide reference materials over a δ34Ssulfide range of − 32.1‰ to 17.3‰ and a δ33S range of − 16.5‰ to 8.9‰ via laser ablation (LA)-MC-ICP-MS. Here, we identify a possible plasma induced fractionation for Ssulfate and describe a new method using external isotope calibration corrections using solution and LA-MC-ICP-MS.

Influence of 3D effects on 1D aerosol retrievals in synthetic, partially clouded scenes

International Nuclear Information System (INIS)

Stap, F.A.; Hasekamp, O.P.; Emde, C.; Röckmann, T.

2016-01-01

An important challenge in aerosol remote sensing is to retrieve aerosol properties in the vicinity of clouds and in cloud contaminated scenes. Satellite based multi-wavelength, multi-angular, photo-polarimetric instruments are particularly suited for this task as they have the ability to separate scattering by aerosol and cloud particles. Simultaneous aerosol/cloud retrievals using 1D radiative transfer codes cannot account for 3D effects such as shadows, cloud induced enhancements and darkening of cloud edges. In this study we investigate what errors are introduced on the retrieved optical and micro-physical aerosol properties, when these 3D effects are neglected in retrievals where the partial cloud cover is modeled using the Independent Pixel Approximation. To this end a generic, synthetic data set of PARASOL like observations for 3D scenes with partial, liquid water cloud cover is created. It is found that in scenes with random cloud distributions (i.e. broken cloud fields) and either low cloud optical thickness or low cloud fraction, the inversion algorithm can fit the observations and retrieve optical and micro-physical aerosol properties with sufficient accuracy. In scenes with non-random cloud distributions (e.g. at the edge of a cloud field) the inversion algorithm can fit the observations, however, here the retrieved real part of the refractive indices of both modes is biased. - Highlights: • An algorithm for retrieval of both aerosol and cloud properties is presented. • Radiative transfer models of 3D, partially clouded scenes are simulated. • Errors introduced in the retrieved aerosol properties are discussed.

Gender, Race, Mobility and Performance in James McBride’s The Good Lord Bird

Directory of Open Access Journals (Sweden)

Yuan-Chin Chang

2016-03-01

Full Text Available In The Good Lord Bird, Onion’s gender passing and performance can be seen as fluid and transparent. Performance, mobility, fluid and constant change are themes and currents throughout the novel. The dramatic narrative feeds off tensions arising from race and gender and the ways in which related identities are experienced and performed. The current paper examines factors relating to performativity and identity in terms of race; in the case of Onion’s narrative these inform a specific kind of understanding of a social and geographical situation that requires subversion. Through humor and satire, McBride creastes a powerful work with contemporary resonances. The drama of the novel is based on concepts of performativity and identity, and the understanding represented by the symbol of the “Good Lord” bird in the novel. McBride wrote the novel for a contemporary audience, knowing that they would be attuned to such issues surrounding racial performance and racial identity. In a way, the unusual literary depiction of a self-identified male who inhabits a female performed identity throughout the novel can be seen as McBride’s comment on the ridiculousness of a binary system of racial categorization as used since the slavery era. Using theories from Lacan, Butler and Bhabha, the current work examines the plurality and hybridity of performed identities in The Good Lord Bird as they relate to understanding.

Insightfulness and later infant attachment in clinically depressed and nonclinical mothers.

Science.gov (United States)

Ramsauer, Brigitte; Lotzin, Annett; Quitmann, Julia H; Becker-Stoll, Fabienne; Tharner, Anne; Romer, Georg

2014-01-01

The aim of this pilot study was to investigate the relationship between maternal insightfulness and sensitivity and subsequent infant attachment security and disorganization in clinically depressed and nonclinical mother-infant groups. Nineteen depressed mothers with infants ages 3 to 11 months participated in this study. Twenty nonclinical mother-infant dyads were matched to the clinical sample according to infant sex and age. Maternal depression was assessed using the Diagnostic and Statistical Manual of Mental Disorders, fourth edition (American Psychiatric Association, 1994), insightfulness using the Insightfulness Assessment (IA), and sensitivity using the Maternal Sensitivity Scales (M.D.S. Ainsworth, 1969). IA classifications and subscales were considered separately. Later infant attachment was assessed by the Strange Situation Procedure (M.D.S. Ainsworth, M.C. Blehar, E. Waters, & S. Wall, 1978). Depressed mothers tended to have less securely attached children than did nonclinical mothers. Within the clinical sample, the insightfulness categories correlated slightly moderately with attachment security, but were not related to attachment disorganization. Within the nonclinical sample, the IA categories were slightly moderately associated with attachment security and with disorganization. On IA subscales, relationship patterns differed in clinically depressed and nonclinical mother-infant dyads. These findings provide the first evidence of the predictive power of the IA categorization and subscales on subsequent infant attachment. They also may allow the development of different foci of intervention for enhancing insightful caregiving. © 2014 Michigan Association for Infant Mental Health.

Overcoming Constraints in Healthcare with Cloud Technology.

Science.gov (United States)

Hucíková, Anežka; Babic, Ankica

2016-01-01

Transitioning enterprise operations to the cloud brings a variety of opportunities and challenges. Such step requires a deep and complex understanding of all elements related to the technology as well as defining the manner in which specific cloud challenges can be dealt with. To provide a better understanding of these opportunities and challenges within healthcare, systematic literature overview and industrial cases review is used. Results of the two methods show interconnection between cloud deployment advantages and constrains. However, healthcare case studies provide interesting insights emphasizing cloud complexity and superposition which seems to balance organizational limitations.

High-mass star formation possibly triggered by cloud-cloud collision in the H II region RCW 34

Science.gov (United States)

Hayashi, Katsuhiro; Sano, Hidetoshi; Enokiya, Rei; Torii, Kazufumi; Hattori, Yusuke; Kohno, Mikito; Fujita, Shinji; Nishimura, Atsushi; Ohama, Akio; Yamamoto, Hiroaki; Tachihara, Kengo; Hasegawa, Yutaka; Kimura, Kimihiro; Ogawa, Hideo; Fukui, Yasuo

2018-05-01

We report on the possibility that the high-mass star located in the H II region RCW 34 was formed by a triggering induced by a collision of molecular clouds. Molecular gas distributions of the 12CO and 13CO J = 2-1 and 12CO J = 3-2 lines in the direction of RCW 34 were measured using the NANTEN2 and ASTE telescopes. We found two clouds with velocity ranges of 0-10 km s-1 and 10-14 km s-1. Whereas the former cloud is as massive as ˜1.4 × 104 M⊙ and has a morphology similar to the ring-like structure observed in the infrared wavelengths, the latter cloud, with a mass of ˜600 M⊙, which has not been recognized by previous observations, is distributed to just cover the bubble enclosed by the other cloud. The high-mass star with a spectral type of O8.5V is located near the boundary of the two clouds. The line intensity ratio of 12CO J = 3-2/J = 2-1 yields high values (≳1.0), suggesting that these clouds are associated with the massive star. We also confirm that the obtained position-velocity diagram shows a similar distribution to that derived by a numerical simulation of the supersonic collision of two clouds. Using the relative velocity between the two clouds (˜5 km s-1), the collisional time scale is estimated to be ˜0.2 Myr with the assumption of a distance of 2.5 kpc. These results suggest that the high-mass star in RCW 34 was formed rapidly within a time scale of ˜0.2 Myr via a triggering of a cloud-cloud collision.

FOREST Unbiased Galactic plane Imaging survey with the Nobeyama 45 m telescope (FUGIN): Molecular clouds toward W 33; possible evidence for a cloud-cloud collision triggering O star formation

Science.gov (United States)

Kohno, Mikito; Torii, Kazufumi; Tachihara, Kengo; Umemoto, Tomofumi; Minamidani, Tetsuhiro; Nishimura, Atsushi; Fujita, Shinji; Matsuo, Mitsuhiro; Yamagishi, Mitsuyoshi; Tsuda, Yuya; Kuriki, Mika; Kuno, Nario; Ohama, Akio; Hattori, Yusuke; Sano, Hidetoshi; Yamamoto, Hiroaki; Fukui, Yasuo

2018-05-01

We observed molecular clouds in the W 33 high-mass star-forming region associated with compact and extended H II regions using the NANTEN2 telescope as well as the Nobeyama 45 m telescope in the J = 1-0 transitions of 12CO, 13CO, and C18O as part of the FOREST Unbiased Galactic plane Imaging survey with the Nobeyama 45 m telescope (FUGIN) legacy survey. We detected three velocity components at 35 km s-1, 45 km s-1, and 58 km s-1. The 35 km s-1 and 58 km s-1 clouds are likely to be physically associated with W 33 because of the enhanced 12CO J = 3-2 to J = 1-0 intensity ratio as R_3-2/1-0} > 1.0 due to the ultraviolet irradiation by OB stars, and morphological correspondence between the distributions of molecular gas and the infrared and radio continuum emissions excited by high-mass stars. The two clouds show complementary distributions around W 33. The velocity separation is too large to be gravitationally bound, and yet not explained by expanding motion by stellar feedback. Therefore, we discuss whether a cloud-cloud collision scenario likely explains the high-mass star formation in W 33.

Representation of Arctic mixed-phase clouds and the Wegener-Bergeron-Findeisen process in climate models: Perspectives from a cloud-resolving study

Science.gov (United States)

Fan, Jiwen; Ghan, Steven; Ovchinnikov, Mikhail; Liu, Xiaohong; Rasch, Philip J.; Korolev, Alexei

2011-01-01

Two types of Arctic mixed-phase clouds observed during the ISDAC and M-PACE field campaigns are simulated using a 3-dimensional cloud-resolving model (CRM) with size-resolved cloud microphysics. The modeled cloud properties agree reasonably well with aircraft measurements and surface-based retrievals. Cloud properties such as the probability density function (PDF) of vertical velocity (w), cloud liquid and ice, regimes of cloud particle growth, including the Wegener-Bergeron-Findeisen (WBF) process, and the relationships among properties/processes in mixed-phase clouds are examined to gain insights for improving their representation in General Circulation Models (GCMs). The PDF of the simulated w is well represented by a Gaussian function, validating, at least for arctic clouds, the subgrid treatment used in GCMs. The PDFs of liquid and ice water contents can be approximated by Gamma functions, and a Gaussian function can describe the total water distribution, but a fixed variance assumption should be avoided in both cases. The CRM results support the assumption frequently used in GCMs that mixed phase clouds maintain water vapor near liquid saturation. Thus, ice continues to grow throughout the stratiform cloud but the WBF process occurs in about 50% of cloud volume where liquid and ice co-exist, predominantly in downdrafts. In updrafts, liquid and ice particles grow simultaneously. The relationship between the ice depositional growth rate and cloud ice strongly depends on the capacitance of ice particles. The simplified size-independent capacitance of ice particles used in GCMs could lead to large deviations in ice depositional growth.

High Resolution Integral Field Spectroscopy of Europa's Sodium Clouds: Evidence for a Component with Origins in Iogenic Plasma.

Science.gov (United States)

Schmidt, C.; Johnson, R. E.; Mendillo, M.; Baumgardner, J. L.; Moore, L.; O'Donoghue, J.; Leblanc, F.

2015-12-01

With the object of constraining Iogenic contributions and identifying drivers for variability, we report new observations of neutral sodium in Europa's exosphere. An R~20000 integral field spectrograph at McDonald Observatory is used to generate Doppler maps of sodium cloud structures with a resolution of 2.8 km/s/pixel. In the five nights of observations since 2011, measurements on UT 6.15-6.31 May 2015 uniquely feature fast (10s of km/s) neutral sodium clouds extending nearly 100 Europa radii, more distant than in any previous findings. During these measurements, the satellite geometry was favorable for the transfer of Na from Io to Europa, located at 1:55 to 4:00 and 3:38 to 4:39 Jovian local time, respectively. Eastward emission (away from Jupiter) extends 10-20 Europa radii retaining the moon's rest velocity, while westward emission blue-shifts with distance, and a broad range of velocities are measured, reaching at least 70 km/s at 80 Europa radii. These cloud features are distinct from Io's "banana" and "stream" features, the distant Jupiter-orbiting nebula, and from terrestrial OH and Na contaminant emissions. Io's production was quiescent during this observation, following an extremely active phase in February 2015. These results are consistent with previous findings that Europa's Na exosphere has peak emission between midnight and dawn Jovian local time and support the idea that sodium escape from Io can significantly enhance the emission intensity measured at Europa.

Autoradiographic imaging of the serotonin transporter, using S-[{sup 18}F](fluoromethyl)-(+)-McN5652 ([{sup 18}F]Me-McN) in the brains of several animal species

Energy Technology Data Exchange (ETDEWEB)

Kretzschmar, M.; Zessin, J.; Brust, P.; Cumming, P. [PET Centre of Aarhus Univ. Hospitals, Aarhus C (Denmark); Bergmann, R.

2002-01-01

The [{sup 18}F]fluoromethyl analogue of (+)-McN5652 ([{sup 18}F]Me-McN) was recently proposed as a new potential PET tracer [1]. To further validate its use in PET, we studied the binding of [{sup 18}F]Me-McN in the brains of rats and pigs using autoradiography. The binding was compared with the uptake of the known 5-HT uptake inhibitor [{sup 3}H] citalopram [2] and the radioligand (+)-[{sup 11}C]McN5652. The binding of the three compounds was qualitatively identical in the autoradiograms of the individual brains. Intense labelling was observed in regions known to be serotonin uptake sites. The binding was specifically inhibited, using the 5-HT uptake inhibitors citalopram and fluoxetine. (orig.)

A Wing Pod-based Millimeter Wave Cloud Radar on HIAPER

Science.gov (United States)

Vivekanandan, Jothiram; Tsai, Peisang; Ellis, Scott; Loew, Eric; Lee, Wen-Chau; Emmett, Joanthan

2014-05-01

One of the attractive features of a millimeter wave radar system is its ability to detect micron-sized particles that constitute clouds with lower than 0.1 g m-3 liquid or ice water content. Scanning or vertically-pointing ground-based millimeter wavelength radars are used to study stratocumulus (Vali et al. 1998; Kollias and Albrecht 2000) and fair-weather cumulus (Kollias et al. 2001). Airborne millimeter wavelength radars have been used for atmospheric remote sensing since the early 1990s (Pazmany et al. 1995). Airborne millimeter wavelength radar systems, such as the University of Wyoming King Air Cloud Radar (WCR) and the NASA ER-2 Cloud Radar System (CRS), have added mobility to observe clouds in remote regions and over oceans. Scientific requirements of millimeter wavelength radar are mainly driven by climate and cloud initiation studies. Survey results from the cloud radar user community indicated a common preference for a narrow beam W-band radar with polarimetric and Doppler capabilities for airborne remote sensing of clouds. For detecting small amounts of liquid and ice, it is desired to have -30 dBZ sensitivity at a 10 km range. Additional desired capabilities included a second wavelength and/or dual-Doppler winds. Modern radar technology offers various options (e.g., dual-polarization and dual-wavelength). Even though a basic fixed beam Doppler radar system with a sensitivity of -30 dBZ at 10 km is capable of satisfying cloud detection requirements, the above-mentioned additional options, namely dual-wavelength, and dual-polarization, significantly extend the measurement capabilities to further reduce any uncertainty in radar-based retrievals of cloud properties. This paper describes a novel, airborne pod-based millimeter wave radar, preliminary radar measurements and corresponding derived scientific products. Since some of the primary engineering requirements of this millimeter wave radar are that it should be deployable on an airborne platform

CubeSat Constellation Cloud Winds(C3Winds) A New Wind Observing System to Study Mesoscale Cloud Dynamics and Processes

Science.gov (United States)

Wu, D. L.; Kelly, M.A.; Yee, J.-H.; Boldt, J.; Demajistre, R.; Reynolds, E. L.; Tripoli, G. J.; Oman, L. D.; Prive, N.; Heidinger, A. K.;

A Slightly Longer History of E=mc 2, Or How I Came to Hate 4/3

Energy Technology Data Exchange (ETDEWEB)

Rothman, Tony [Princeton University

2012-05-02

According to popular mythology, the equivalence of mass and energy was suddenly conceived of and proven by Einstein in 1905. In fact, serious attempts to connect mass and energy went back at least to J.J. Thomson in 1881 and over the next two decades became the subject of numerous investigations by Maxwellians such as Heaviside, Abraham and Poincaré. The talk focuses on a 1904 thought experiment of Fritz Hasenöhrl, who first announced that blackbody radiation had an equivalent mass such that E = (3/8)mc2, which he subsequently corrected to E = (3/4)mc2. Why did Hasenöhrl get the wrong answer and Einstein get the right one? What does it mean to prove a law of nature? Stephen Boughn and myself have recently carried out an complete relativistic analysis of Hasenöhrl’s thought experiment and, for the first time in the century since it was proposed, have correctly solved the problem. I will try to keep the mathematics at a reasonable level but it will require familiarity with electrodynamics and special relativity.

A User-Customized Virtual Network Platform for NaaS Cloud

Directory of Open Access Journals (Sweden)

Lei Xiao

2016-01-01

Full Text Available Now all kinds of public cloud providers take computing and storage resources as the user’s main demand, making it difficult for users to deploy complex network in the public cloud. This paper proposes a virtual cloud platform with network as the core demand of the user, which can provide the user with the capacity of free network architecture as well as all kinds of virtual resources. The network is isolated by port groups of the virtual distributed switch and the data forwarding and access control between different network segments are implemented by virtual machines loading a soft-routing system. This paper also studies the management interface of network architecture and the uniform way to connect the remote desktop of virtual resources on the web, hoping to provide some new ideas for the Network as a Service model.

A Velocity Structure Analysis of Giant Molecular Cloud Associated with HII Region S152

Directory of Open Access Journals (Sweden)

Woo-Yeol Choi

2005-06-01

Full Text Available S152 is a small bright emission nebula located in the Perseus arm. Its optical diameter corresponds to 1.5 pc for an adopted distance 3.5 kpc. However, S152 is a part of a giant molecular cloud complex, which consists of several dense cores, containing active star-forming sites, and well aligned arm-like features. We analyzed the FCRAO 12CO (J = 1→0 Outer Galaxy Survey data in this region to study the kinematical structure of this region, which resembles a big ``scorpion". We found that there exist three different velocity components, about --54.5, --50.4, --48.8 km s-1, depending on the position of the ``scorpion". There also exist velocity gradients of 0.21 km s-1 pc-1 and 0.16 km s-1 pc-1 through the whole extent of the ``scorpion". Interestingly, these two velocity gradients show an opposite direction with each other. It is likely that the velocity structure of this region may result from the mergence of different gas clouds, and the interaction with the SNR 109.1-1.0 occurred later, mostly at the region around the ``head of the scorpion" only.

Considerations for Cloud Security Operations

OpenAIRE

Cusick, James

2016-01-01

Information Security in Cloud Computing environments is explored. Cloud Computing is presented, security needs are discussed, and mitigation approaches are listed. Topics covered include Information Security, Cloud Computing, Private Cloud, Public Cloud, SaaS, PaaS, IaaS, ISO 27001, OWASP, Secure SDLC.

Newly detected molecules in dense interstellar clouds

Science.gov (United States)

Irvine, William M.; Avery, L. W.; Friberg, P.; Matthews, H. E.; Ziurys, L. M.

Several new interstellar molecules have been identified including C2S, C3S, C5H, C6H and (probably) HC2CHO in the cold, dark cloud TMC-1; and the discovery of the first interstellar phosphorus-containing molecule, PN, in the Orion "plateau" source. Further results include the observations of 13C3H2 and C3HD, and the first detection of HCOOH (formic acid) in a cold cloud.

GIANT MOLECULAR CLOUD FORMATION IN DISK GALAXIES: CHARACTERIZING SIMULATED VERSUS OBSERVED CLOUD CATALOGS

Energy Technology Data Exchange (ETDEWEB)

Benincasa, Samantha M.; Pudritz, Ralph E.; Wadsley, James [Department of Physics and Astronomy, McMaster University, Hamilton, ON L8S 4M1 (Canada); Tasker, Elizabeth J. [Department of Physics, Faculty of Science, Hokkaido University, Kita-ku, Sapporo 060-0810 (Japan)

2013-10-10

We present the results of a study of simulated giant molecular clouds (GMCs) formed in a Milky Way-type galactic disk with a flat rotation curve. This simulation, which does not include star formation or feedback, produces clouds with masses ranging between 10{sup 4} M{sub ☉} and 10{sup 7} M{sub ☉}. We compare our simulated cloud population to two observational surveys: the Boston University-Five College Radio Astronomy Observatory Galactic Ring Survey and the BIMA All-Disk Survey of M33. An analysis of the global cloud properties as well as a comparison of Larson's scaling relations is carried out. We find that simulated cloud properties agree well with the observed cloud properties, with the closest agreement occurring between the clouds at comparable resolution in M33. Our clouds are highly filamentary—a property that derives both from their formation due to gravitational instability in the sheared galactic environment, as well as to cloud-cloud gravitational encounters. We also find that the rate at which potentially star-forming gas accumulates within dense regions—wherein n{sub thresh} ≥ 10{sup 4} cm{sup –3}—is 3% per 10 Myr, in clouds of roughly 10{sup 6} M{sub ☉}. This suggests that star formation rates in observed clouds are related to the rates at which gas can be accumulated into dense subregions within GMCs via filamentary flows. The most internally well-resolved clouds are chosen for listing in a catalog of simulated GMCs—the first of its kind. The cataloged clouds are available as an extracted data set from the global simulation.

Cloud Computing (1/2)

CERN Multimedia

CERN. Geneva

2012-01-01

Cloud computing, the recent years buzzword for distributed computing, continues to attract and keep the interest of both the computing and business world. These lectures aim at explaining "What is Cloud Computing?" identifying and analyzing it's characteristics, models, and applications. The lectures will explore different "Cloud definitions" given by different authors and use them to introduce the particular concepts. The main cloud models (SaaS, PaaS, IaaS), cloud types (public, private, hybrid), cloud standards and security concerns will be presented. The borders between Cloud Computing and Grid Computing, Server Virtualization, Utility Computing will be discussed and analyzed.

Cloud Computing (2/2)

CERN Multimedia

CERN. Geneva

2012-01-01

Cloud computing, the recent years buzzword for distributed computing, continues to attract and keep the interest of both the computing and business world. These lectures aim at explaining "What is Cloud Computing?" identifying and analyzing it's characteristics, models, and applications. The lectures will explore different "Cloud definitions" given by different authors and use them to introduce the particular concepts. The main cloud models (SaaS, PaaS, IaaS), cloud types (public, private, hybrid), cloud standards and security concerns will be presented. The borders between Cloud Computing and Grid Computing, Server Virtualization, Utility Computing will be discussed and analyzed.

MPLNET V3 Cloud and Planetary Boundary Layer Detection

Science.gov (United States)

Lewis, Jasper R.; Welton, Ellsworth J.; Campbell, James R.; Haftings, Phillip C.

2016-01-01

The NASA Micropulse Lidar Network Version 3 algorithms for planetary boundary layer and cloud detection are described and differences relative to the previous Version 2 algorithms are highlighted. A year of data from the Goddard Space Flight Center site in Greenbelt, MD consisting of diurnal and seasonal trends is used to demonstrate the results. Both the planetary boundary layer and cloud algorithms show significant improvement of the previous version.

Cloud Atlas: Rotational Modulations in the L/T Transition Brown Dwarf Companion HN Peg B

Science.gov (United States)

Zhou, Yifan; Apai, Dániel; Metchev, Stanimir; Lew, Ben W. P.; Schneider, Glenn; Marley, Mark S.; Karalidi, Theodora; Manjavacas, Elena; Bedin, Luigi R.; Cowan, Nicolas B.; Miles-Páez, Paulo A.; Lowrance, Patrick J.; Radigan, Jacqueline; Burgasser, Adam J.

2018-03-01

Time-resolved observations of brown dwarfs’ rotational modulations provide powerful insights into the properties of condensate clouds in ultra-cool atmospheres. Multi-wavelength light curves reveal cloud vertical structures, condensate particle sizes, and cloud morphology, which directly constrain condensate cloud and atmospheric circulation models. We report results from Hubble Space Telescope/Wide Field Camera 3 near-infrared G141 taken in six consecutive orbits observations of HN Peg B, an L/T transition brown dwarf companion to a G0V type star. The best-fit sine wave to the 1.1–1.7 μm broadband light curve has an amplitude of 1.206% ± 0.025% and period of 15.4 ± 0.5 hr. The modulation amplitude has no detectable wavelength dependence except in the 1.4 μm water absorption band, indicating that the characteristic condensate particle sizes are large (>1 μm). We detect significantly (4.4σ) lower modulation amplitude in the 1.4 μm water absorption band and find that HN Peg B’s spectral modulation resembles those of early T type brown dwarfs. We also describe a new empirical interpolation method to remove spectral contamination from the bright host star. This method may be applied in other high-contrast time-resolved observations with WFC3.

Techniques to Detect DoS and DDoS Attacks and an Introduction of a Mobile Agent System to Enhance it in Cloud Computing

Directory of Open Access Journals (Sweden)

Abdelali Saidi

2017-03-01

Full Text Available Security in cloud computing is the ultimate question that every potential user studies before adopting it. Among the important points that the provider must ensure is that the Cloud will be available anytime the consumer tries to access it. Generally, the Cloud is accessible via the Internet, what makes it subject to a large variety of attacks. Today, the most striking cyber-attacks are the flooding DoS and its variant DDoS. This type of attacks aims to break down the availability of a service to its legitimate clients. In this paper, we underline the most used techniques to stand up against DoS flooading attacks in the Cloud.

Ac-Trp-DPhe(p-I)-Arg-Trp-NH2, a 250-Fold Selective Melanocortin-4 Receptor (MC4R) Antagonist over the Melanocortin-3 Receptor (MC3R), Affects Energy Homeostasis in Male and Female Mice Differently.

Science.gov (United States)

Lensing, Cody J; Adank, Danielle N; Doering, Skye R; Wilber, Stacey L; Andreasen, Amy; Schaub, Jay W; Xiang, Zhimin; Haskell-Luevano, Carrie

2016-09-21

The melanocortin-4 receptor (MC4R) has been indicated as a therapeutic target for metabolic disorders such as anorexia, cachexia, and obesity. The current study investigates the in vivo effects on energy homeostasis of a 15 nM MC4R antagonist SKY2-23-7, Ac-Trp-DPhe(p-I)-Arg-Trp-NH2, that is a 3700 nM melanocortin-3 receptor (MC3R) antagonist with minimal MC3R and MC4R agonist activity. When monitoring both male and female mice in TSE metabolic cages, sex-specific responses were observed in food intake, respiratory exchange ratio (RER), and energy expenditure. A 7.5 nmol dose of SKY2-23-7 increased food intake, increased RER, and trended toward decreasing energy expenditure in male mice. However, this compound had minimal effect on female mice's food intake and RER at the 7.5 nmol dose. A 2.5 nmol dose of SKY2-23-7 significantly increased female food intake, RER, and energy expenditure while having a minimal effect on male mice at this dose. The observed sex differences of SKY2-23-7 administration result in the discovery of a novel chemical probe for elucidating the molecular mechanisms of the sexual dimorphism present within the melanocortin pathway. To further explore the melanocortin sexual dimorphism, hypothalamic gene expression was examined. The mRNA expression of the MC3R and proopiomelanocortin (POMC) were not significantly different between sexes. However, the expression of agouti-related peptide (AGRP) was significantly higher in female mice which may be a possible mechanism for the sex-specific effects observed with SKY2-23-7.

Cloud Forecasting and 3-D Radiative Transfer Model Validation using Citizen-Sourced Imagery

Science.gov (United States)

Gasiewski, A. J.; Heymsfield, A.; Newman Frey, K.; Davis, R.; Rapp, J.; Bansemer, A.; Coon, T.; Folsom, R.; Pfeufer, N.; Kalloor, J.

2017-12-01

Cloud radiative feedback mechanisms are one of the largest sources of uncertainty in global climate models. Variations in local 3D cloud structure impact the interpretation of NASA CERES and MODIS data for top-of-atmosphere radiation studies over clouds. Much of this uncertainty results from lack of knowledge of cloud vertical and horizontal structure. Surface-based data on 3-D cloud structure from a multi-sensor array of low-latency ground-based cameras can be used to intercompare radiative transfer models based on MODIS and other satellite data with CERES data to improve the 3-D cloud parameterizations. Closely related, forecasting of solar insolation and associated cloud cover on time scales out to 1 hour and with spatial resolution of 100 meters is valuable for stabilizing power grids with high solar photovoltaic penetrations. Data for cloud-advection based solar insolation forecasting with requisite spatial resolution and latency needed to predict high ramp rate events obtained from a bottom-up perspective is strongly correlated with cloud-induced fluctuations. The development of grid management practices for improved integration of renewable solar energy thus also benefits from a multi-sensor camera array. The data needs for both 3D cloud radiation modelling and solar forecasting are being addressed using a network of low-cost upward-looking visible light CCD sky cameras positioned at 2 km spacing over an area of 30-60 km in size acquiring imagery on 30 second intervals. Such cameras can be manufactured in quantity and deployed by citizen volunteers at a marginal cost of 200-400 and operated unattended using existing communications infrastructure. A trial phase to understand the potential utility of up-looking multi-sensor visible imagery is underway within this NASA Citizen Science project. To develop the initial data sets necessary to optimally design a multi-sensor cloud camera array a team of 100 citizen scientists using self-owned PDA cameras is being

An Improved Cloud Classification Algorithm for China’s FY-2C Multi-Channel Images Using Artificial Neural Network

Directory of Open Access Journals (Sweden)

Chun-Xiang Shi

2009-07-01

Full Text Available The crowning objective of this research was to identify a better cloud classification method to upgrade the current window-based clustering algorithm used operationally for China’s first operational geostationary meteorological satellite FengYun-2C (FY-2C data. First, the capabilities of six widely-used Artificial Neural Network (ANN methods are analyzed, together with the comparison of two other methods: Principal Component Analysis (PCA and a Support Vector Machine (SVM, using 2864 cloud samples manually collected by meteorologists in June, July, and August in 2007 from three FY-2C channel (IR1, 10.3-11.3 μm; IR2, 11.5-12.5 μm and WV 6.3-7.6 μm imagery. The result shows that: (1 ANN approaches, in general, outperformed the PCA and the SVM given sufficient training samples and (2 among the six ANN networks, higher cloud classification accuracy was obtained with the Self-Organizing Map (SOM and Probabilistic Neural Network (PNN. Second, to compare the ANN methods to the present FY-2C operational algorithm, this study implemented SOM, one of the best ANN network identified from this study, as an automated cloud classification system for the FY-2C multi-channel data. It shows that SOM method has improved the results greatly not only in pixel-level accuracy but also in cloud patch-level classification by more accurately identifying cloud types such as cumulonimbus, cirrus and clouds in high latitude. Findings of this study suggest that the ANN-based classifiers, in particular the SOM, can be potentially used as an improved Automated Cloud Classification Algorithm to upgrade the current window-based clustering method for the FY-2C operational products.

Cooperative Optimization QoS Cloud Routing Protocol Based on Bacterial Opportunistic Foraging and Chemotaxis Perception for Mobile Internet

Directory of Open Access Journals (Sweden)

Shujuan Wang

2015-01-01

Full Text Available In order to strengthen the mobile Internet mobility management and cloud platform resources utilization, optimizing the cloud routing efficiency is established, based on opportunistic bacterial foraging bionics, and puts forward a chemotaxis perception of collaborative optimization QoS (Quality of Services cloud routing mechanism. The cloud routing mechanism is based on bacterial opportunity to feed and bacterial motility and to establish the data transmission and forwarding of the bacterial population behavior characteristics. This mechanism is based on the characteristics of drug resistance of bacteria and the structure of the field, and through many iterations of the individual behavior and population behavior the bacteria can be spread to the food gathering area with a certain probability. Finally, QoS cloud routing path would be selected and optimized based on bacterial bionic optimization and hedge mapping relationship between mobile Internet node and bacterial population evolution iterations. Experimental results show that, compared with the standard dynamic routing schemes, the proposed scheme has shorter transmission delay, lower packet error ratio, QoS cloud routing loading, and QoS cloud route request overhead.

McMAC: Towards a MAC Protocol with Multi-Constrained QoS Provisioning for Diverse Traffic in Wireless Body Area Networks

OpenAIRE

Monowar, Muhammad; Hassan, Mohammad; Bajaber, Fuad; Al-Hussein, Musaed; Alamri, Atif

2012-01-01

The emergence of heterogeneous applications with diverse requirements for resource-constrained Wireless Body Area Networks (WBANs) poses significant challenges for provisioning Quality of Service (QoS) with multi-constraints (delay and reliability) while preserving energy efficiency. To address such challenges, this paper proposes McMAC, a MAC protocol with multi-constrained QoS provisioning for diverse traffic classes in WBANs. McMAC classifies traffic based on their multi-constrained QoS de...

Simion 3D Version 6.0 User`s Manual

Energy Technology Data Exchange (ETDEWEB)

Dahl, D.A.

1995-11-01

The original SIMION was an electrostatic lens analysis and design program developed by D.C. McGilvery at Latrobe University, Bundoora Victoria, Australia, 1977. SIMION for the PC, developed at the Idaho National Engineering Laboratory, shares little more than its name with the original McGilvery version. INEL`s fifth major SIMION release, version 6.0, represents a quantum improvement over previous versions. This C based program can model complex problems using an ion optics workbench that can hold up to 200 2D and/or 3D electrostatic/magnetic potential arrays. Arrays can have up to 10,000,000 points. SIMION 3D`s 32 bit virtual Graphics User Interface provides a highly interactive advanced user environment. All potential arrays are visualized as 3D objects that the user can cut away to inspect ion trajectories and potential energy surfaces. User programs have been greatly extended in versatility and power. A new geometry file option supports the definition of highly complex array geometry. Extensive algorithm modifications have dramatically improved this version`s computational speed and accuracy.

Minimizing Total Busy Time with Application to Energy-efficient Scheduling of Virtual Machines in IaaS clouds

OpenAIRE

Quang-Hung, Nguyen; Thoai, Nam

2016-01-01

Infrastructure-as-a-Service (IaaS) clouds have become more popular enabling users to run applications under virtual machines. Energy efficiency for IaaS clouds is still challenge. This paper investigates the energy-efficient scheduling problems of virtual machines (VMs) onto physical machines (PMs) in IaaS clouds along characteristics: multiple resources, fixed intervals and non-preemption of virtual machines. The scheduling problems are NP-hard. Most of existing works on VM placement reduce ...

Use of the ARM Measurements of Spectral Zenith Radiance for Better Understanding of 3D Cloud-Radiation Processes & Aerosol-Cloud Interaction

Energy Technology Data Exchange (ETDEWEB)

Alexander Marshak; Warren Wiscombe; Yuri Knyazikhin; Christine Chiu

2011-05-24

We proposed a variety of tasks centered on the following question: what can we learn about 3D cloud-radiation processes and aerosol-cloud interaction from rapid-sampling ARM measurements of spectral zenith radiance? These ARM measurements offer spectacular new and largely unexploited capabilities in both the temporal and spectral domains. Unlike most other ARM instruments, which average over many seconds or take samples many seconds apart, the new spectral zenith radiance measurements are fast enough to resolve natural time scales of cloud change and cloud boundaries as well as the transition zone between cloudy and clear areas. In the case of the shortwave spectrometer, the measurements offer high time resolution and high spectral resolution, allowing new discovery-oriented science which we intend to pursue vigorously. Research objectives are, for convenience, grouped under three themes: • Understand radiative signature of the transition zone between cloud-free and cloudy areas using data from ARM shortwave radiometers, which has major climatic consequences in both aerosol direct and indirect effect studies. • Provide cloud property retrievals from the ARM sites and the ARM Mobile Facility for studies of aerosol-cloud interactions. • Assess impact of 3D cloud structures on aerosol properties using passive and active remote sensing techniques from both ARM and satellite measurements.

+Cloud: An Agent-Based Cloud Computing Platform

OpenAIRE

González, Roberto; Hernández de la Iglesia, Daniel; de la Prieta Pintado, Fernando; Gil González, Ana Belén

2017-01-01

Cloud computing is revolutionizing the services provided through the Internet, and is continually adapting itself in order to maintain the quality of its services. This study presents the platform +Cloud, which proposes a cloud environment for storing information and files by following the cloud paradigm. This study also presents Warehouse 3.0, a cloud-based application that has been developed to validate the services provided by +Cloud.

BP Network Control for Resource Allocation and QoS Ensurance in UAV Cloud

Directory of Open Access Journals (Sweden)

Ang Gao

2018-01-01

Full Text Available Unmanned aerial vehicle (UAV cloud can greatly enhance the intelligence of unmanned systems by dynamically unloading the compute-intensive applications to cloud. For the uncertain nature of UAV missions and fast-changing environment, different UAV applications may have different quality of service (QoS requirements. This paper proposes a mixed QoS ensurance and energy-balanced (MQEB architecture for UAV cloud from a view of control theory, which can support both hard and soft QoS ensurance with the consideration of energy saving. The hard and soft QoS requirements are decoupled by being normalized into a two-level cascaded feedback loop. The former is time slot loop (TS-Loop to enforce the absolute QoS ensurance for real-time applications, and the latter is contention window loop (CW-Loop to enforce the plastic QoS ensurance for non-real-time applications. Finally, the back propagating (BP neuron network is used for parameters’ self-tuning and controller design. The hardware experiments demonstrate the feasibility of MQEB. In heavy load, MQEB has greater throughput and better energy efficiency, and in light load, MQBE has lower total power consumption.

J.B. McLachlan: a biography

Energy Technology Data Exchange (ETDEWEB)

Frank, D.

1999-07-01

This social history and biography of James Bryson McLaughlin (1869-1916) describes McLaughlin's leadership as an educator and instigator in organizing Nova Scotia's coal miners during the labour wars in the 1920s. McLaughlin's background and childhood, education, reputation, religion, family life, health, and death are described. Included are descriptions of the life of coal miners in Cape Breton, radical left politics in Canada and the organizers involved, the political economy of the coal industry, child labour, churches, coal markets and prices, company towns and housing, mining disasters and fatalities, elections, First World War efforts, the depression, immigrants, and strikes. The labour organizations, companies, churches, and politicians involved in the struggles for union acceptance are discussed. 872 refs., 7 figs., 24 photos.

McSustainability and McJustice: Certification, Alternative Food and Agriculture, and Social Change

Directory of Open Access Journals (Sweden)

Maki Hatanaka

2014-11-01

Full Text Available Alternative food and agriculture movements increasingly rely on market-based approaches, particularly voluntary standards and certification, to advance environmental sustainability and social justice. Using a case study of an ecological shrimp project in Indonesia that became certified organic, this paper raises concerns regarding the impacts of certification on alternative food and agriculture movements, and their aims of furthering sustainability and justice. Drawing on George Ritzer’s McDonaldization framework, I argue that the ecological shrimp project became McDonaldized with the introduction of voluntary standards and certification. Specifically, efficiency, calculability, predictability, and control became key characteristics of the shrimp project. While the introduction of such characteristics increased market access, it also entailed significant costs, including an erosion of trust and marginalization and alienation of farmers. Given such tradeoffs, in concluding I propose that certification is producing particular forms of environmental sustainability and social justice, what I term McSustainability and McJustice. While enabling the expansion of alternative food and agriculture, McSustainability and McJustice tend to allow little opportunity for farmer empowerment and food sovereignty, as well as exclude aspects of sustainable farming or ethical production that are not easily measured, standardized, and validated.

AIRS-AMSU variables-CloudSat cloud mask, radar reflectivities, and cloud classification matchups V3.2

Data.gov (United States)

National Aeronautics and Space Administration — This is AIRS-CloudSat collocated subset, in NetCDF 4 format. These data contain collocated: AIRS/AMSU retrievals at AMSU footprints, CloudSat radar reflectivities,...

A 3D view of the outflow in the Orion Molecular Cloud 1 (OMC-1)

DEFF Research Database (Denmark)

Nissen, H.D.; Cunningham, N.J.; Sherson, Maiken Gustafsson

2012-01-01

and proper motion data for near-IR emission of molecular hydrogen to obtain the first 3-dimensional (3D) structure of the OMC-1 outflow. Our work illustrates a new diagnostic tool for studies of star formation that will be exploited in the near future with the advent of high spatial resolution spectro...... Observatory, the Anglo-Australian Observatory and the Subaru Telescope. These data give the 3D velocity of ejecta yielding a 3D reconstruction of the outflows. This allows one to view the material from different vantage points in space giving considerable insight into the geometry. Our analysis indicates......The fast outflow emerging from a region associated with massive star formation in the Orion Molecular Cloud 1 (OMC-1), located behind the Orion Nebula, appears to have been set in motion by an explosive event. Here we study the structure and dynamics of outflows in OMC-1. We combine radial velocity...

A Comparative Analysis of the Distributions of KFC and McDonald’s Outlets in China

Directory of Open Access Journals (Sweden)

Yikang Rui

2016-03-01

Full Text Available Mainland China has become one of the most important markets for international fast-food chains over the past decade. To study the regional spread of KFC and McDonald’s outlets in Chinese cities, the correlation of their distributions and degree of market expansion were explored and compared to analyze both the local and the global spatial autocorrelations. A geographically weighted Poisson regression model was also used to examine the influence of demographic, economic, and geographic factors on their spatial distributions. The findings of this comparative study reveal the site selection criteria at the city level by studying the differences and similarities in outlet distributions for KFC and McDonald’s. The presented results can guide other chains to enhance business location planning and formulate regional development policy.

Työvuorosuunnittelu myynnin kehittämisen työvälineenä McDonald´s-ketjussa

OpenAIRE

Helenius, Enna

2015-01-01

Tämä opinnäytetyö on McDonald´s Oy:n tilaama tutkimuksellinen kehittämistyö. Kehittämistyössä tutkittiin McDonald´s-ketjun esimiesten työvuorosuunnittelun osaamistasoa sekä työvuorosuunnittelun vaikutusta myynnin kasvattamiseen. Kehittämishankkeen tavoitteena oli luoda kehitysehdotuksia, joilla saadaan kasvatettua yksikkökohtaista myyntiä työvuorosuun-nittelun avulla. Aihetta on lähestytty tapaustutkimuksen keinoin. Opinnäytetyö koostuu tietoperustasta, ravintolapäälliköille tehdystä kyse...

Feature Extraction from 3D Point Cloud Data Based on Discrete Curves

Directory of Open Access Journals (Sweden)

Yi An

2013-01-01

Full Text Available Reliable feature extraction from 3D point cloud data is an important problem in many application domains, such as reverse engineering, object recognition, industrial inspection, and autonomous navigation. In this paper, a novel method is proposed for extracting the geometric features from 3D point cloud data based on discrete curves. We extract the discrete curves from 3D point cloud data and research the behaviors of chord lengths, angle variations, and principal curvatures at the geometric features in the discrete curves. Then, the corresponding similarity indicators are defined. Based on the similarity indicators, the geometric features can be extracted from the discrete curves, which are also the geometric features of 3D point cloud data. The threshold values of the similarity indicators are taken from [0,1], which characterize the relative relationship and make the threshold setting easier and more reasonable. The experimental results demonstrate that the proposed method is efficient and reliable.

Caffeic acid phenethyl ester inhibits 3-MC-induced CYP1A1 expression through induction of hypoxia-inducible factor-1α

Energy Technology Data Exchange (ETDEWEB)

Kim, Hyung Gyun [Department of Toxicology, College of Pharmacy, Chungnam National University, Daejeon (Korea, Republic of); Han, Eun Hee [Division of Life Science, Korea Basic Science Institute, Daejeon (Korea, Republic of); Im, Ji Hye; Lee, Eun Ji; Jin, Sun Woo [Department of Toxicology, College of Pharmacy, Chungnam National University, Daejeon (Korea, Republic of); Jeong, Hye Gwang, E-mail: hgjeong@cnu.ac.kr [Department of Toxicology, College of Pharmacy, Chungnam National University, Daejeon (Korea, Republic of)

2015-09-25

Caffeic acid phenethyl ester (CAPE), a natural component of propolis, is reported to have anticarcinogenic properties, although its precise chemopreventive mechanism remains unclear. In this study, we examined the effects of CAPE on 3-methylcholanthrene (3-MC)-induced CYP1A1 expression and activities. CAPE reduced the formation of the benzo[a]pyrene-DNA adduct. Moreover, CAPE inhibited 3-MC-induced CYP1A1 activity, mRNA expression, protein level, and promoter activity. CAPE treatment also decreased 3-MC-inducible xenobiotic-response element (XRE)-linked luciferase, aryl hydrocarbons receptor (AhR) transactivation and nuclear localization. CAPE induced hypoxia inducible factor-1α (HIF-1α) protein level and HIF-1α responsible element (HRE) transcriptional activity. CAPE-mediated HIF-1α reduced 3-MC-inducible CYP1A1 protein expression. Taken together, CAPE decreases 3-MC-mediated CYP1A1 expression, and this inhibitory response is associated with inhibition of AhR and HIF-1α induction. - Highlights: • CAPE reduced the formation of the benzo[a]pyrene-DNA adduct. • CAPE inhibited 3-MC-induced CYP1A1 expression. • CAPE induced HIF-1α induction. • CAPE-mediated HIF-1α reduced 3-MC-inducible CYP1A1 expression.

Detection of hydrogen sulfide above the clouds in Uranus's atmosphere

Science.gov (United States)

Irwin, Patrick G. J.; Toledo, Daniel; Garland, Ryan; Teanby, Nicholas A.; Fletcher, Leigh N.; Orton, Glenn A.; Bézard, Bruno

2018-04-01

Visible-to-near-infrared observations indicate that the cloud top of the main cloud deck on Uranus lies at a pressure level of between 1.2 bar and 3 bar. However, its composition has never been unambiguously identified, although it is widely assumed to be composed primarily of either ammonia or hydrogen sulfide (H2S) ice. Here, we present evidence of a clear detection of gaseous H2S above this cloud deck in the wavelength region 1.57-1.59 μm with a mole fraction of 0.4-0.8 ppm at the cloud top. Its detection constrains the deep bulk sulfur/nitrogen abundance to exceed unity (>4.4-5.0 times the solar value) in Uranus's bulk atmosphere, and places a lower limit on the mole fraction of H2S below the observed cloud of (1.0 -2.5 ) ×1 0-5. The detection of gaseous H2S at these pressure levels adds to the weight of evidence that the principal constituent of 1.2-3-bar cloud is likely to be H2S ice.

Detection of hydrogen sulfide above the clouds in Uranus's atmosphere

Science.gov (United States)

Irwin, Patrick G. J.; Toledo, Daniel; Garland, Ryan; Teanby, Nicholas A.; Fletcher, Leigh N.; Orton, Glenn A.; Bézard, Bruno

2018-05-01

Visible-to-near-infrared observations indicate that the cloud top of the main cloud deck on Uranus lies at a pressure level of between 1.2 bar and 3 bar. However, its composition has never been unambiguously identified, although it is widely assumed to be composed primarily of either ammonia or hydrogen sulfide (H2S) ice. Here, we present evidence of a clear detection of gaseous H2S above this cloud deck in the wavelength region 1.57-1.59 μm with a mole fraction of 0.4-0.8 ppm at the cloud top. Its detection constrains the deep bulk sulfur/nitrogen abundance to exceed unity (>4.4-5.0 times the solar value) in Uranus's bulk atmosphere, and places a lower limit on the mole fraction of H2S below the observed cloud of (1.0 -2.5 ) ×1 0-5. The detection of gaseous H2S at these pressure levels adds to the weight of evidence that the principal constituent of 1.2-3-bar cloud is likely to be H2S ice.

Cloud-Resolving Modeling Intercomparison Study of a Squall Line Case from MC3E - Properties of Convective Core

Science.gov (United States)

Fan, J.; Han, B.; Varble, A.; Morrison, H.; North, K.; Kollias, P.; Chen, B.; Dong, X.; Giangrande, S. E.; Khain, A.; Lin, Y.; Mansell, E.; Milbrandt, J.; Stenz, R.; Thompson, G.; Wang, Y.

2016-12-01

The large spread in CRM model simulations of deep convection and aerosol effects on deep convective clouds (DCCs) makes it difficult to (1) further our understanding of deep convection and (2) define "benchmarks" and then limit their use in parameterization developments. A constrained model intercomparsion study on a mid-latitude mesoscale squall line is performed using the Weather Research & Forecasting (WRF) model at 1-km horizontal grid spacing with eight cloud microphysics schemes to understand specific processes that lead to the large spreads of simulated convection and precipitation. Various observational data are employed to evaluate the baseline simulations. All simulations tend to produce a wider convective area but a much narrower stratiform area. The magnitudes of virtual potential temperature drop, pressure rise, and wind speed peak associated with the passage of the gust front are significantly smaller compared with the observations, suggesting simulated cool pools are weaker. Simulations generally overestimate the vertical velocity and radar reflectivity in convective cores compared with the retrievals. The modeled updraft velocity and precipitation have a significant spread across eight schemes. The spread of updraft velocity is the combination of both low-level pressure perturbation gradient (PPG) and buoyancy. Both PPG and thermal buoyancy are small for simulations of weak convection but both are large for those of strong convection. Ice-related parameterizations contribute majorly to the spread of updraft velocity, while they are not the reason for the large spread of precipitation. The understandings gained in this study can help to focus future observations and parameterization development.

Synthesis of polypyrrole nanowires with positive effect on MC3T3-E1 cell functions through electrical stimulation

Energy Technology Data Exchange (ETDEWEB)

He, Yuan; Wang, Shihui [Department of Biomaterials, College of Materials, Xiamen University, Xiamen 361005 (China); Mu, Jing, E-mail: mujing@picb.ac.cn [Department of Biomaterials, College of Materials, Xiamen University, Xiamen 361005 (China); Chinese Academy of Sciences-Max Planck Partner Institute for Computational Biology, Shanghai Institutes for Biological Sciences, Chinese Academy of Science, Shanghai 200031 (China); Dai, Lingfeng [Department of Biomaterials, College of Materials, Xiamen University, Xiamen 361005 (China); Zhang, Zhong [Department of Stomatology, The Affiliated Zhongshan Hospital of Xiamen University, Xiamen 361005 (China); Sun, Yanan; Shi, Wei [Department of Biomaterials, College of Materials, Xiamen University, Xiamen 361005 (China); Ge, Dongtao, E-mail: gedt@xmu.edu.cn [Department of Biomaterials, College of Materials, Xiamen University, Xiamen 361005 (China)

2017-02-01

Conducting polymer polypyrrole (PPy) possesses good biocompatibility and conductivity and has been used as functional coatings in bone tissue regeneration. In this study, a cholic acid doped PPy nanowires (PPy NWs) coating was electrochemically polymerized on the surface of titanium (Ti). The porous intertwined PPy NWs coating exhibited excellent electrical conductivity and electrochemical activity, better hydrophilicity and higher surface energy. In vitro cell experiments demonstrated that the PPy NWs coating together with a 10 μA substrate-mediate electrical stimulation (ES) was capable to positive regulate the functions of MC3T3-E1 such as cell adhesion, proliferation and differentiation. Further long-term functions of cell tests including alkaline phosphatase (ALP) activity, bone-carboxyglutamic acid-containing protein (BGP) and calcium deposition were all thoroughly increased. These confirmed that the combination of PPy NWs and ES could accelerate MC3T3-E1 cells mature and osteogenesis. Hence, the PPy NWs coating was an electro bioactive coating and may have potential applications in the treatment of bone damage repairing and regeneration with ES. - Highlights: • The porous PPy nanowire coating was electrochemically polymerized on Ti. • PPy NWs had good electrical conductivity, electrochemical stability and hydrophilicity. • Pure PPy NWs with ES could obviously promote the growth and cell functions of MC3T3-E1.

Synthesis of polypyrrole nanowires with positive effect on MC3T3-E1 cell functions through electrical stimulation

International Nuclear Information System (INIS)

He, Yuan; Wang, Shihui; Mu, Jing; Dai, Lingfeng; Zhang, Zhong; Sun, Yanan; Shi, Wei; Ge, Dongtao

2017-01-01

Conducting polymer polypyrrole (PPy) possesses good biocompatibility and conductivity and has been used as functional coatings in bone tissue regeneration. In this study, a cholic acid doped PPy nanowires (PPy NWs) coating was electrochemically polymerized on the surface of titanium (Ti). The porous intertwined PPy NWs coating exhibited excellent electrical conductivity and electrochemical activity, better hydrophilicity and higher surface energy. In vitro cell experiments demonstrated that the PPy NWs coating together with a 10 μA substrate-mediate electrical stimulation (ES) was capable to positive regulate the functions of MC3T3-E1 such as cell adhesion, proliferation and differentiation. Further long-term functions of cell tests including alkaline phosphatase (ALP) activity, bone-carboxyglutamic acid-containing protein (BGP) and calcium deposition were all thoroughly increased. These confirmed that the combination of PPy NWs and ES could accelerate MC3T3-E1 cells mature and osteogenesis. Hence, the PPy NWs coating was an electro bioactive coating and may have potential applications in the treatment of bone damage repairing and regeneration with ES. - Highlights: • The porous PPy nanowire coating was electrochemically polymerized on Ti. • PPy NWs had good electrical conductivity, electrochemical stability and hydrophilicity. • Pure PPy NWs with ES could obviously promote the growth and cell functions of MC3T3-E1.

Performance testing of 3D point cloud software

Science.gov (United States)

Varela-González, M.; González-Jorge, H.; Riveiro, B.; Arias, P.

2013-10-01

LiDAR systems are being used widely in recent years for many applications in the engineering field: civil engineering, cultural heritage, mining, industry and environmental engineering. One of the most important limitations of this technology is the large computational requirements involved in data processing, especially for large mobile LiDAR datasets. Several software solutions for data managing are available in the market, including open source suites, however, users often unknown methodologies to verify their performance properly. In this work a methodology for LiDAR software performance testing is presented and four different suites are studied: QT Modeler, VR Mesh, AutoCAD 3D Civil and the Point Cloud Library running in software developed at the University of Vigo (SITEGI). The software based on the Point Cloud Library shows better results in the loading time of the point clouds and CPU usage. However, it is not as strong as commercial suites in working set and commit size tests.

Performance testing of 3D point cloud software

Directory of Open Access Journals (Sweden)

M. Varela-González

2013-10-01

Full Text Available LiDAR systems are being used widely in recent years for many applications in the engineering field: civil engineering, cultural heritage, mining, industry and environmental engineering. One of the most important limitations of this technology is the large computational requirements involved in data processing, especially for large mobile LiDAR datasets. Several software solutions for data managing are available in the market, including open source suites, however, users often unknown methodologies to verify their performance properly. In this work a methodology for LiDAR software performance testing is presented and four different suites are studied: QT Modeler, VR Mesh, AutoCAD 3D Civil and the Point Cloud Library running in software developed at the University of Vigo (SITEGI. The software based on the Point Cloud Library shows better results in the loading time of the point clouds and CPU usage. However, it is not as strong as commercial suites in working set and commit size tests.

The magnetic field of cloud 3 in L204

Energy Technology Data Exchange (ETDEWEB)

Cashman, Lauren R.; Clemens, D. P., E-mail: lcashman@bu.edu, E-mail: clemens@bu.edu [Institute for Astrophysical Research, Boston University, 725 Commonwealth Avenue, Boston, MA 02215 (United States)

2014-10-01

The L204 dark cloud complex is a nearby filamentary structure in Ophiuchus North that has no signs of active star formation. Past studies show that L204 is interacting with the nearby runaway O star, ζ Oph, and hosts a magnetic field that is coherent across parsec-length scales. Near-infrared H-band (1.6 μm) linear polarization measurements were obtained for 3896 background stars across a 1° × 1.°5 region centered on the dense Cloud 3 in L204, using the Mimir near-infrared instrument on the 1.8 m Perkins Telescope. Analysis of these observations reveals both large-scale properties and small-scale changes in the magnetic field direction in Cloud 3. In the northern and western ζ Oph facing regions of the cloud, the magnetic field appears to be pushed up against the face of the cloud. This may indicate that the UV flux from ζ Oph has compressed the magnetic field on the western edge of L204. The plane-of-sky magnetic field strength is estimated to be ∼11-26 μG using the Chandrasekhar-Fermi method. The polarimetry data also reveal that the polarization efficiency (PE ≡ P {sub H}/A {sub V}) steadily decreases with distance from ζ Oph (–0.09% ± 0.03% mag{sup –1} pc{sup –1}). Additionally, power-law fits of PE versus A {sub V} for localized samples of probe stars show steeper negative indices with distance from ζ Oph. Both findings highlight the importance of external illumination, here from ζ Oph, in aligning dust grains to embedded magnetic fields.

The value of accountability in the cloud : Individuals’ willingness to pay for transparency

NARCIS (Netherlands)

Steijn, Wouter; Niezen, Maartje

2015-01-01

Accountability tools increasingly are introduced in the cloud market in order to offer cloud customers more insight in the use of their data in the cloud and to promote responsible data stewardship. The underlying assumption of tool developers is that people are willing to pay for cloud services

Department of Defense Use of Commercial Cloud Computing Capabilities and Services

Science.gov (United States)

2015-11-01

models (Infrastructure as a Service (IaaS), Platform as a Service (PaaS), and Software as a Service ( SaaS )), and four deployment models (Public...NIST defines three main models for cloud computing: IaaS, PaaS, and SaaS . These models help differentiate the implementation responsibilities that fall...and SaaS . 3. Public, Private, Community, and Hybrid Clouds Cloud services come in different forms, depending on the customer’s specific needs

Bespoke automation of medical workforce rostering using Google’s free cloud applications

Directory of Open Access Journals (Sweden)

Peter Benjamin Michael Thomas

2017-12-01

Full Text Available Background: Providing safe and consistent care requires optimal deployment of medical staff. Ensuring this happens is a significant administrative burden due to complex working patterns. Objective: To describe a pilot feasibility study of the automation of medical duty rostering in a busy tertiary Ophthalmology department. Methods: A cloud based web application was created using Google’s free cloud services. Users access the system via a website which hosts live rosters, and use electronic forms to submit requests which are automatically handled by Google App Scripts. Results: Over a 2-year period (8/2014-6/2016, the system processed 563 leave requests and 300 on call swaps automatically. 3,300 emails and 1,000 forms were automatically generated. User satisfaction was 100% (n=24. Discussion: Many time consuming aspects of roster management were automated with significant time savings to all parties, allowing increased clinical time for doctors involved in administration. Planning for safe staffing levels was supported.

Ice in the Taurus molecular cloud: modelling of the 3-μm profile

International Nuclear Information System (INIS)

Bult, C.E.P.M. van de; Greenberg, J.M.; Whittet, D.C.B.

1985-01-01

Detailed calculations of the absorption by interstellar core-mantle particles with mantles of different compositions are compared with observations of the 3μm ice band in the Taurus molecular cloud. The strength and shape of the 3-μm band is shown to be a remarkably good diagnostic of the physical state and evolution of the dust in molecular clouds. The strength of the band is consistent with large fractional H 2 O mantle concentrations, in the range 60-70 per cent, as predicted by theoretical studies of cloud chemistry and as expected from the high oxygen abundance in pre-molecular clouds. (author)

Commercial trading of IaaS cloud resources

CERN Multimedia

CERN. Geneva; Dr. Watzl, Johannes

2014-01-01

Dr. Johannes Watzl is responsible for the Product Management at Deutsche Börse Cloud Exchange. His work is focused on the specification and introduction of new tradable products and and product features. Prior to his role at Deutsche Börse Cloud Exchange, Johannes was a researcher at Ludwig-Maximilians-Universität München where he worked at European Commission funded projects in the field of distributed computing and standardisation in grid and cloud computing and obtained his PhD. He started research on the...

ExMC Technology Watch

Science.gov (United States)

Krihak, M.; Barr, Y.; Watkins, S.; Fung, P.; McGrath, T.; Baumann, D.

2012-01-01

The Technology Watch (Tech Watch) project is a NASA endeavor conducted under the Human Research Program's (HRP) Exploration Medical Capability (ExMC) element, and focusing on ExMC technology gaps. The project involves several NASA centers, including the Johnson Space Center (JSC), Glenn Research Center (GRC), Ames Research Center (ARC), and the Langley Research Center (LaRC). The objective of Tech Watch is to identify emerging, high-impact technologies that augment current NASA HRP technology development efforts. Identifying such technologies accelerates the development of medical care and research capabilities for the mitigation of potential health issues encountered during human space exploration missions. The aim of this process is to leverage technologies developed by academia, industry and other government agencies and to identify the effective utilization of NASA resources to maximize the HRP return on investment. The establishment of collaborations with these entities is beneficial to technology development, assessment and/or insertion and further NASA's goal to provide a safe and healthy environment for human exploration. In 2011, the major focus areas for Tech Watch included information dissemination, education outreach and public accessibility to technology gaps and gap reports. The dissemination of information was accomplished through site visits to research laboratories and/or companies, and participation at select conferences where Tech Watch objectives and technology gaps were presented. Presentation of such material provided researchers with insights on NASA ExMC needs for space exploration and an opportunity to discuss potential areas of common interest. The second focus area, education outreach, was accomplished via two mechanisms. First, several senior student projects, each related to an ExMC technology gap, were sponsored by the various NASA centers. These projects presented ExMC related technology problems firsthand to collegiate laboratories

ATLAS cloud R and D

International Nuclear Information System (INIS)

Panitkin, Sergey; Bejar, Jose Caballero; Hover, John; Zaytsev, Alexander; Megino, Fernando Barreiro; Girolamo, Alessandro Di; Kucharczyk, Katarzyna; Llamas, Ramon Medrano; Benjamin, Doug; Gable, Ian; Paterson, Michael; Sobie, Randall; Taylor, Ryan; Hendrix, Val; Love, Peter; Ohman, Henrik; Walker, Rodney

2014-01-01

The computing model of the ATLAS experiment was designed around the concept of grid computing and, since the start of data taking, this model has proven very successful. However, new cloud computing technologies bring attractive features to improve the operations and elasticity of scientific distributed computing. ATLAS sees grid and cloud computing as complementary technologies that will coexist at different levels of resource abstraction, and two years ago created an R and D working group to investigate the different integration scenarios. The ATLAS Cloud Computing R and D has been able to demonstrate the feasibility of offloading work from grid to cloud sites and, as of today, is able to integrate transparently various cloud resources into the PanDA workload management system. The ATLAS Cloud Computing R and D is operating various PanDA queues on private and public resources and has provided several hundred thousand CPU days to the experiment. As a result, the ATLAS Cloud Computing R and D group has gained a significant insight into the cloud computing landscape and has identified points that still need to be addressed in order to fully utilize this technology. This contribution will explain the cloud integration models that are being evaluated and will discuss ATLAS' learning during the collaboration with leading commercial and academic cloud providers.

MC3D modelling of stratified explosion

International Nuclear Information System (INIS)

Picchi, S.; Berthoud, G.

1999-01-01

It is known that a steam explosion can occur in a stratified geometry and that the observed yields are lower than in the case of explosion in a premixture configuration. However, very few models are available to quantify the amount of melt which can be involved and the pressure peak that can be developed. In the stratified application of the MC3D code, mixing and fragmentation of the melt are explained by the growth of Kelvin Helmholtz instabilities due to the shear flow of the two phase coolant above the melt. Such a model is then used to recalculate the Frost-Ciccarelli tin-water experiment. Pressure peak, speed of propagation, bubble shape and erosion height are well reproduced as well as the influence of the inertial constraint (height of the water pool). (author)

MC3D modelling of stratified explosion

Energy Technology Data Exchange (ETDEWEB)

Picchi, S.; Berthoud, G. [DTP/SMTH/LM2, CEA, 38 - Grenoble (France)

1999-07-01

It is known that a steam explosion can occur in a stratified geometry and that the observed yields are lower than in the case of explosion in a premixture configuration. However, very few models are available to quantify the amount of melt which can be involved and the pressure peak that can be developed. In the stratified application of the MC3D code, mixing and fragmentation of the melt are explained by the growth of Kelvin Helmholtz instabilities due to the shear flow of the two phase coolant above the melt. Such a model is then used to recalculate the Frost-Ciccarelli tin-water experiment. Pressure peak, speed of propagation, bubble shape and erosion height are well reproduced as well as the influence of the inertial constraint (height of the water pool). (author)

3D Cloud Field Prediction using A-Train Data and Machine Learning Techniques

Science.gov (United States)

Johnson, C. L.

2017-12-01

Validation of cloud process parameterizations used in global climate models (GCMs) would greatly benefit from observed 3D cloud fields at the size comparable to that of a GCM grid cell. For the highest resolution simulations, surface grid cells are on the order of 100 km by 100 km. CloudSat/CALIPSO data provides 1 km width of detailed vertical cloud fraction profile (CFP) and liquid and ice water content (LWC/IWC). This work utilizes four machine learning algorithms to create nonlinear regressions of CFP, LWC, and IWC data using radiances, surface type and location of measurement as predictors and applies the regression equations to off-track locations generating 3D cloud fields for 100 km by 100 km domains. The CERES-CloudSat-CALIPSO-MODIS (C3M) merged data set for February 2007 is used. Support Vector Machines, Artificial Neural Networks, Gaussian Processes and Decision Trees are trained on 1000 km of continuous C3M data. Accuracy is computed using existing vertical profiles that are excluded from the training data and occur within 100 km of the training data. Accuracy of the four algorithms is compared. Average accuracy for one day of predicted data is 86% for the most successful algorithm. The methodology for training the algorithms, determining valid prediction regions and applying the equations off-track is discussed. Predicted 3D cloud fields are provided as inputs to the Ed4 NASA LaRC Fu-Liou radiative transfer code and resulting TOA radiances compared to observed CERES/MODIS radiances. Differences in computed radiances using predicted profiles and observed radiances are compared.

Comparisons of characteristics of magnetic clouds and cloud-like structures during 1995-2012

Science.gov (United States)

Lepping, R. P.; Wu, C. C.; Liou, K.

2014-12-01

Using eighteen years (1995-2012) of solar wind plasma and magnetic field data (observed by the Wind spacecraft), solar activity (e.g., sunspot number: SSN), and geomagnetic activity index (Dst), we have identified 168 magnetic clouds (MCs) and 197 magnetic cloud-like structures (MCLs), and we made relevant comparisons. The following features are found during seven different periods [Total Period (TP) during 1995-2012, first and second half period during 1995-2003 (P1) and 2004-2012 (P2), Quiet periods during 1995-1997 (Q1) and 2007-2009 (Q2), Active periods during 1998-2006 (A1) and 2010-2012 (A2)]. (1) During 1995-2012 the yearly occurrence frequency is TP = 9.3 for MCs and TP =10.9 for MCLs. (2) In the quiet periods, Q1,Q2 is higher than Q1,Q2 (i.e., Q1 > Q1 and Q2 > Q2), but Q1,Q2 is lower than during the active periods (i.e., A1 A1 and A2 A2). This is probably due to the lower interaction rate between MCs/MCLs and the quiet background solar wind during lower solar active periods in Q1, Q2, and higher interaction rate and highly disturbed background solar wind during the active periods in A1 and A2. (3) The minimum Bz (Bzmin) inside of a MC is well correlated with the intensity of geomagnetic activity, Dstmin (minimum Dst found within a storm event) for MCs (correlation coefficient, c.c. = 0.75 and the fitting function is Dstmin = -1.74+ 7.23 Bzmin), but Bzmin is not well correlated with MCLs (c.c. = 0.57). (4) MCs play a major role in producing geomagnetic storms: the absolute value of the average Dstmin for MCs (MC = -70 nT) associated geomagnetic storms is two times stronger than that for MCLs (MCL = -35 nT) due to the difference in the IMF (interplanetary magnetic field) strength. (5) Over the Total Period the SSN is not correlated with TP (c.c. = 0.27), but is well associated with TP (c.c. = 0.85). Note that the c.c. for SSN vs. P2 is better than that for SSN vs. P2. (6) Averages of IMF, solar wind speed, and density inside of the MCs are larger than those

McKenzie River Watershed Coordination, Annual Report 2001-2002.

Energy Technology Data Exchange (ETDEWEB)

Thrailkil, Jim

2003-11-01

BPA funding, in conjunction with contributions from numerous partners organizations and grant funds supports the McKenzie Watershed Council's (MWC) efforts to coordinate restoration and monitoring programs of federal, state, local government, and residents within the watershed. Primary goals of the MWC are to improve resource stewardship and conserve fish, wildlife, and water quality resources. Underpinning the goals is the MWC's baseline program centered on relationship building and information sharing. Objectives for FY02 included: (1) Continue to coordinate McKenzie Watershed activities among diverse groups to restore fish and wildlife habitat in the watershed, with a focus on the middle to lower McKenzie, including private lands and the McKenzie-Willamette confluence area; (2) Influence behavior of watershed residents to benefit watershed function though an outreach and education program, utilizing (BPA funded) Assessment and Conservation Strategy information to provide a context for prioritized action; (3) Continue to maintain and sustain a highly functional watershed council; (4) Maintain and improve water quality concerns through the continuation of Council-sponsored monitoring and evaluation programs; and (5) Continue to secure other funding for watershed restoration and protection projects and Council operations.

Into the Darkness: Interstellar Extinction Near the Cepheus OB3 Molecular Cloud

Science.gov (United States)

Fitzpatrick, Edward L.; Jacklin, S.; Massa, D.

2014-01-01

We present the results of a followup investigation to a study performed by Massa and Savage (1984, ApJ, 279, 310) of the properties of UV interstellar extinction in the region of the Cepheus OB3 molecular cloud. That study was performed using UV photometry and spectro-photometry from the ANS and IUE satellites. We have extended this study into the IR, utilizing the uniform database of IR photometry available from the 2MASS project. This is a part of a larger program whose goal is to study the properties of extinction in localized regions, where we hope to find clues to dust grain growth and destruction processes through spatial correlations of extinction with distinct environmental properties. Similarly to Massa and Savage’s UV results, we find that the IR extinction properties on the Cepheus OB3 region vary systematically with the apparent proximity of the target stars to the molecular cloud. We also find that the UV extinction and the IR extinction are crudely correlated. The methodology leading to these results and their implications are discussed.

NMR Insights into the Structure-Function Relationships in the Binding of Melanocortin Analogues to the MC1R Receptor.

Science.gov (United States)

Morais, Maurício; Zamora-Carreras, Héctor; Raposinho, Paula D; Oliveira, Maria Cristina; Pantoja-Uceda, David; Correia, João D G; Jiménez, M Angeles

2017-07-15

Linear and cyclic analogues of the α-melanocyte stimulating hormone (α-MSH) targeting the human melanocortin receptor 1 (MC1R) are of pharmacological interest for detecting and treating melanoma. The central sequence of α-MSH (His-Phe-Arg-Trp) has been identified as being essential for receptor binding. To deepen current knowledge on the molecular basis for α-MSH bioactivity, we aimed to understand the effect of cycle size on receptor binding. To that end, we synthesised two macrocyclic isomeric α-MSH analogues, c[NH-NO₂-C₆H₃-CO-His-DPhe-Arg-Trp-Lys]-Lys-NH₂ ( CycN-K6 ) and c[NH-NO₂-C₆H₃-CO-His-DPhe-Arg-Trp-Lys-Lys]-NH₂ ( CycN-K7 ). Their affinities to MC1R receptor were determined by competitive binding assays, and their structures were analysed by ¹H and 13 C NMR. These results were compared to those of the previously reported analogue c[S-NO₂-C₆H₃-CO-His-DPhe-Arg-Trp-Cys]-Lys-NH₂ ( CycS-C6 ). The MC1R binding affinity of the 22-membered macrocyclic peptide CycN-K6 (IC 50 = 155 ± 16 nM) is higher than that found for the 25-membered macrocyclic analogue CycN-K7 (IC 50 = 495 ± 101 nM), which, in turn, is higher than that observed for the 19-membered cyclic analogue CycS-C6 (IC 50 = 1770 ± 480 nM). NMR structural study indicated that macrocycle size leads to changes in the relative dispositions of the side chains, particularly in the packing of the Arg side chain relative to the aromatic rings. In contrast to the other analogues, the 22-membered cycle's side chains are favorably positioned for receptor interaction.

GPM GROUND VALIDATION NASA ER-2 NAVIGATION DATA MC3E V1

Data.gov (United States)

National Aeronautics and Space Administration — The GPM Ground Validation NASA ER-2 Navigation Data MC3E dataset contains information recorded by an on board navigation recorder (NavRec). In addition to typical...

Terra@15, S'Cool@18: A Long-Running Student and Citizen Science Campaign for Validating Cloud Retrievals

Science.gov (United States)

Chambers, L. H.; Crecelius, S.; Rogerson, T. M.

2014-12-01

As Terra marks its 15th anniversary, the Students' Cloud Observations On-Line (S'COOL) Project celebrates an 18 year milestone. S'COOL is the education and public outreach arm of the Clouds and the Earth's Radiant Energy System (CERES) project, which has two instruments on Terra. It developed from an initial conversation between scientists and educators in December 1996 before the launch of the first CERES instrument on the Tropical Rainfall Measuring Mission (TRMM). Since January 1997, S'COOL has engaged students and citizen scientists with this NASA research by inviting them to make ground truth observations of clouds and related Earth system parameters. Since the project began, more than 127,000 cloud observations have been reported from more than 70 countries around the world. While observations are accepted at any time, more than half of those reported correspond to a CERES satellite retrieval matched in time (+/-15 minutes) and space. Nearly 1% of the reports, from locations at higher latitudes, can be compared to both Terra and Aqua to shed light on view angle effects. More than 3% of observations are for Terra night-time overpasses. About 10% of reports are for locations with snow on the ground - an ongoing challenge for cloud detection from space. S'COOL draws very loyal and unique participants: a school in Pennsylvania alone has reported more than 11,000 observations (including more than 2,500 night-time reports for Terra). In Central and South America, 3 schools in Colombia and one in Nicaragua have each reported more than 2,500 observations. The addition of the S'COOL Rover program, added in 2007 to simplify participation for citizen scientists, enabled reports from the Around the Americas sailing ship that circumnavigated North and South America in 2009-10, Roz Savage, a UK woman who has rowed solo across all the world's oceans, and a few observations from the MAGIC campaign of instrumented cargo ships transiting from Long Beach to Hawaii. A middle

GPM GROUND VALIDATION NASA MICRO RAIN RADAR (MRR) MC3E V1

Data.gov (United States)

National Aeronautics and Space Administration — The GPM Ground Validation NASA Micro Rain Radar (MRR) MC3E dataset was collected by a Micro Rain Radar (MRR), which is a vertically pointing Doppler radar which...

Morphological Operations to Extract Urban Curbs in 3D MLS Point Clouds

Directory of Open Access Journals (Sweden)

Borja Rodríguez-Cuenca

2016-06-01

Full Text Available Automatic curb detection is an important issue in road maintenance, three-dimensional (3D urban modeling, and autonomous navigation fields. This paper is focused on the segmentation of curbs and street boundaries using a 3D point cloud captured by a mobile laser scanner (MLS system. Our method provides a solution based on the projection of the measured point cloud on the XY plane. Over that plane, a segmentation algorithm is carried out based on morphological operations to determine the location of street boundaries. In addition, a solution to extract curb edges based on the roughness of the point cloud is proposed. The proposed method is valid in both straight and curved road sections and applicable both to laser scanner and stereo vision 3D data due to the independence of its scanning geometry. The proposed method has been successfully tested with two datasets measured by different sensors. The first dataset corresponds to a point cloud measured by a TOPCON sensor in the Spanish town of Cudillero. The second dataset corresponds to a point cloud measured by a RIEGL sensor in the Austrian town of Horn. The extraction method provides completeness and correctness rates above 90% and quality values higher than 85% in both studied datasets.

Analysis of co-located MODIS and CALIPSO observations near clouds

Directory of Open Access Journals (Sweden)

T. Várnai

2012-02-01

Full Text Available This paper aims at helping synergistic studies in combining data from different satellites for gaining new insights into two critical yet poorly understood aspects of anthropogenic climate change, aerosol-cloud interactions and aerosol radiative effects. In particular, the paper examines the way cloud information from the MODIS (MODerate resolution Imaging Spectroradiometer imager can refine our perceptions based on CALIOP (Cloud-Aerosol Lidar with Orthogonal Polarization lidar measurements about the systematic aerosol changes that occur near clouds.

The statistical analysis of a yearlong dataset of co-located global maritime observations from the Aqua and CALIPSO (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation satellites reveals that MODIS's multispectral imaging ability can greatly help the interpretation of CALIOP observations. The results show that imagers on Aqua and CALIPSO yield very similar pictures, and that the discrepancies – due mainly to wind drift and differences in view angle – do not significantly hinder aerosol measurements near clouds. By detecting clouds outside the CALIOP track, MODIS reveals that clouds are usually closer to clear areas than CALIOP data alone would suggest. The paper finds statistical relationships between the distances to clouds in MODIS and CALIOP data, and proposes a rescaling approach to statistically account for the impact of clouds outside the CALIOP track even when MODIS cannot reliably detect low clouds, for example at night or over sea ice. Finally, the results show that the typical distance to clouds depends on both cloud coverage and cloud type, and accordingly varies with location and season. In maritime areas perceived cloud free, the global median distance to clouds below 3 km altitude is in the 4–5 km range.

Comparisons of Satellite-Deduced Overlapping Cloud Properties and CALIPSO CloudSat Data

Science.gov (United States)

Chang, Fu-Lung; Minnis, Patrick; Lin, Bing; Sun-Mack, Sunny

2010-01-01

Introduction to the overlapped cloud properties derived from polar-orbiting (MODIS) and geostationary (GOES-12, -13, Meteosat-8, -9, etc.) meteorological satellites, which are produced at the NASA Langley Research Center (LaRC) cloud research & development team (NASA lead scientist: Dr. Patrick Minnis). Comparison of the LaRC CERES MODIS Edition-3 overlapped cloud properties to the CALIPSO and the CloudSat active sensing data. High clouds and overlapped clouds occur frequently as deduced by CALIPSO (44 & 25%), CloudSat (25 & 4%), and MODIS (37 & 6%). Large fractions of optically-thin cirrus and overlapped clouds are deduced from CALIPSO, but much smaller fractions are from CloudSat and MODIS. For overlapped clouds, the averaged upper-layer CTHs are about 12.8 (CALIPSO), 10.9 (CloudSat) and 10 km (MODIS), and the averaged lower-layer CTHs are about 3.6 (CALIPSO), 3.2 (CloudSat) and 3.9 km (MODIS). Based on comparisons of upper and lower-layer cloud properties as deduced from the MODIS, CALIPSO and CloudSat data, more enhanced passive satellite methods for retrieving thin cirrus and overlapped cloud properties are needed and are under development.

Scavenging of particulate elemental carbon into stratus cloud

Energy Technology Data Exchange (ETDEWEB)

Kaneyasu, Naoki; Maeda, Takahisa [National Inst. for Resources and Environment, Tsukuba (Japan)

1995-12-31

The role of atmospheric aerosols on the alternation of cloud radiative properties has widely been recognized since 1977 when Tomey and his coworkers have numerically demonstrated the effect of increased cloud condensation nuclei (CCN). At the same time, cloud processes are one of the most important factor in controlling the residence time of atmospheric aerosols through the wet removal process. The redistribution of the size and the composition of pre-cloud aerosols is also the important role of cloud process on the nature of atmospheric aerosols. In order to study these cloud-aerosol interaction phenomena, the incorporation of aerosols into cloud droplets is the first mechanism to be investigated. Among the several mechanisms for the incorporation of aerosols into cloud droplets, nucleation scavenging, is the potentially important process in the view of cloud-aerosol interactions. This critical supersaturation for a given radius of a particle can be theoretically calculated only for pure species, e.g., NaCl. However, a significant portion of the atmospheric aerosols is in the form of internal mixture of multiple components, such as SO{sub 4}{sup 2-}, NO{sub 3}{sup -}, NH{sub 4}{sup +} and particulate elemental carbon. The knowledge acquired by field measurements is therefore essential on this subject. The present study focuses on the scavenging of major components of urban atmospheric aerosols, in particular the incorporation of particulate elemental carbon into stratus cloud. Particulate elemental carbon is the strongest light absorbing species in visible region, and has potential to change the optical property of cloud. On the basis of the measurements conducted at a mountain located in the suburb of Tokyo Metropolitan area, Japan, some insights on the scavenging of particulate elemental carbon into cloud droplet will be presented

Scavenging of particulate elemental carbon into stratus cloud

Energy Technology Data Exchange (ETDEWEB)

Kaneyasu, Naoki; Maeda, Takahisa [National Inst. for Resources and Environment, Tsukuba (Japan)

1996-12-31

The role of atmospheric aerosols on the alternation of cloud radiative properties has widely been recognized since 1977 when Tomey and his coworkers have numerically demonstrated the effect of increased cloud condensation nuclei (CCN). At the same time, cloud processes are one of the most important factor in controlling the residence time of atmospheric aerosols through the wet removal process. The redistribution of the size and the composition of pre-cloud aerosols is also the important role of cloud process on the nature of atmospheric aerosols. In order to study these cloud-aerosol interaction phenomena, the incorporation of aerosols into cloud droplets is the first mechanism to be investigated. Among the several mechanisms for the incorporation of aerosols into cloud droplets, nucleation scavenging, is the potentially important process in the view of cloud-aerosol interactions. This critical supersaturation for a given radius of a particle can be theoretically calculated only for pure species, e.g., NaCl. However, a significant portion of the atmospheric aerosols is in the form of internal mixture of multiple components, such as SO{sub 4}{sup 2-}, NO{sub 3}{sup -}, NH{sub 4}{sup +} and particulate elemental carbon. The knowledge acquired by field measurements is therefore essential on this subject. The present study focuses on the scavenging of major components of urban atmospheric aerosols, in particular the incorporation of particulate elemental carbon into stratus cloud. Particulate elemental carbon is the strongest light absorbing species in visible region, and has potential to change the optical property of cloud. On the basis of the measurements conducted at a mountain located in the suburb of Tokyo Metropolitan area, Japan, some insights on the scavenging of particulate elemental carbon into cloud droplet will be presented

Implementation of a model in Geant4 of an accelerator on Cloudmc, a Web application for the parallelization of Monte Carlo simulations in the Cloud

International Nuclear Information System (INIS)

Miras del Rio, H.; Jimenez Marrufo, R.; Cortes Giraldo, M. A.; Miras del Rio, C.

2013-01-01

This paper describes the implementation in CloudMC of a simulation program MC, based on the code of Geant4, a Siemens Accelerator model Oncor with the intention that in future can be used for calculation of radiation treatments with MC in short periods of time. (Author)

DISTRIBUTION AND ORIGIN OF HIGH-VELOCITY CLOUDS .3. CLOUDS, COMPLEXES AND POPULATIONS

NARCIS (Netherlands)

WAKKER, BP; VANWOERDEN, H

1991-01-01

We present the first complete catalogue of high-velocity clouds (HVCs), followed by a classification of these clouds into complexes and populations. The catalogue will form the basis for comparisons with theoretical models. The study described here yields the following conclusions: (1) Differential

Multiview 3D sensing and analysis for high quality point cloud reconstruction

Science.gov (United States)

Satnik, Andrej; Izquierdo, Ebroul; Orjesek, Richard

2018-04-01

Multiview 3D reconstruction techniques enable digital reconstruction of 3D objects from the real world by fusing different viewpoints of the same object into a single 3D representation. This process is by no means trivial and the acquisition of high quality point cloud representations of dynamic 3D objects is still an open problem. In this paper, an approach for high fidelity 3D point cloud generation using low cost 3D sensing hardware is presented. The proposed approach runs in an efficient low-cost hardware setting based on several Kinect v2 scanners connected to a single PC. It performs autocalibration and runs in real-time exploiting an efficient composition of several filtering methods including Radius Outlier Removal (ROR), Weighted Median filter (WM) and Weighted Inter-Frame Average filtering (WIFA). The performance of the proposed method has been demonstrated through efficient acquisition of dense 3D point clouds of moving objects.

The Exploration of Political Conflicts and Personal Relationships in Ian McEwan’s The Innocent

Directory of Open Access Journals (Sweden)

Mina Abbasiyannejad

2014-03-01

Full Text Available Political conflicts have historically affected the relationships of nations. Ian McEwan’s The Innocent is an excellent example of a story set within the web of such a conflict—the Cold War—that was brought about by U.S. and Soviet confrontation over spheres of influence after the Second World War. This article aims to show how Ian McEwan pictures Americanization as a form of cultural politics aimed at spreading American influence throughout the occupied countries such as Germany for political domination. Max Weber’s theory of political power along with semiotics as a tool is the framework of the article. Signs that refer to the Americanization process, including inferences in the dialogues, gestures, choice of food, and even clothing, are scrutinized and interpreted within the socio-political context the of Cold War. The analysis of The Innocent provides an example of the ways in which fiction represents political conflicts permeating personal and intimate relationships, and how such conflicts may result in a sense of mistrust and intrigue among both people and nations.

Green Cloud on the Horizon

Science.gov (United States)

Ali, Mufajjul

This paper proposes a Green Cloud model for mobile Cloud computing. The proposed model leverage on the current trend of IaaS (Infrastructure as a Service), PaaS (Platform as a Service) and SaaS (Software as a Service), and look at new paradigm called "Network as a Service" (NaaS). The Green Cloud model proposes various Telco's revenue generating streams and services with the CaaS (Cloud as a Service) for the near future.

SEMANTIC3D.NET: a New Large-Scale Point Cloud Classification Benchmark

Science.gov (United States)

Hackel, T.; Savinov, N.; Ladicky, L.; Wegner, J. D.; Schindler, K.; Pollefeys, M.

2017-05-01

This paper presents a new 3D point cloud classification benchmark data set with over four billion manually labelled points, meant as input for data-hungry (deep) learning methods. We also discuss first submissions to the benchmark that use deep convolutional neural networks (CNNs) as a work horse, which already show remarkable performance improvements over state-of-the-art. CNNs have become the de-facto standard for many tasks in computer vision and machine learning like semantic segmentation or object detection in images, but have no yet led to a true breakthrough for 3D point cloud labelling tasks due to lack of training data. With the massive data set presented in this paper, we aim at closing this data gap to help unleash the full potential of deep learning methods for 3D labelling tasks. Our semantic3D.net data set consists of dense point clouds acquired with static terrestrial laser scanners. It contains 8 semantic classes and covers a wide range of urban outdoor scenes: churches, streets, railroad tracks, squares, villages, soccer fields and castles. We describe our labelling interface and show that our data set provides more dense and complete point clouds with much higher overall number of labelled points compared to those already available to the research community. We further provide baseline method descriptions and comparison between methods submitted to our online system. We hope semantic3D.net will pave the way for deep learning methods in 3D point cloud labelling to learn richer, more general 3D representations, and first submissions after only a few months indicate that this might indeed be the case.

Assessment of the Performance of the Chilbolton 3-GHz Advanced Meteorological Radar for Cloud-Top-Height Retrieval.

Science.gov (United States)

Naud, C. M.; Muller, J.-P.; Slack, E. C.; Wrench, C. L.; Clothiaux, E. E.

2005-06-01

The Chilbolton 3-GHz Advanced Meteorological Radar (CAMRa), which is mounted on a fully steerable 25-m dish, can provide three-dimensional information on the presence of hydrometeors. The potential for this radar to make useful measurements of low-altitude liquid water cloud structure is investigated. To assess the cloud-height assignment capabilities of the 3-GHz radar, low-level cloud-top heights were retrieved from CAMRa measurements made between May and July 2003 and were compared with cloud-top heights retrieved from a vertically pointing 94-GHz radar that operates alongside CAMRa. The average difference between the 94- and 3-GHz radar-derived cloud-top heights is shown to be -0.1 ± 0.4 km. To assess the capability of 3-GHz radar scans to be used for satellite-derived cloud-top-height validation, multiangle imaging spectroradiometer (MISR) cloud-top heights were compared with both 94- and 3-GHz radar retrievals. The average difference between 94-GHz radar and MISR cloud-top heights is shown to be 0.1 ± 0.3 km, while the 3-GHz radar and MISR average cloud-top-height difference is shown to be -0.2 ± 0.6 km. In assessing the value of the CAMRa measurements, the problems associated with low-reflectivity values from stratiform liquid water clouds, ground clutter, and Bragg scattering resulting from turbulent mixing are all addressed. It is shown that, despite the difficulties, the potential exists for CAMRa measurements to contribute significantly to liquid water cloud-top-height retrievals, leading to the production of two-dimensional transects (i.e., maps) of cloud-top height.

Analisis Peranan Franchisor Terhadap Suksesnya Bisnis Franchise Pada Mc. Donald’s Cabang Ring Road Medan

OpenAIRE

Simarmata, Leonardo

2012-01-01

Tujuan penelitian ini adalah untuk mengetahui dan menganalisis peranan franchisor dalam promotion, support service, training, control system dan communication terhadap suksesnya bisnis franchise pada Mc Donald’s Cabang Ring Road Medan. Pengumpulan data primer diperoleh dengan cara memberikan daftar pertanyaan (questionaire) dan melakukan wawancara (interview) secara mendalam (depth interview) kepada pemilik usaha M. Donald’s Cabang Ring Road Medan. Teknik analisis data penelitian ini ad...

Osteoblast-like MC3T3-E1 Cells Prefer Glycolysis for ATP Production but Adipocyte-like 3T3-L1 Cells Prefer Oxidative Phosphorylation.

Science.gov (United States)

Guntur, Anyonya R; Gerencser, Akos A; Le, Phuong T; DeMambro, Victoria E; Bornstein, Sheila A; Mookerjee, Shona A; Maridas, David E; Clemmons, David E; Brand, Martin D; Rosen, Clifford J

2018-06-01

Mesenchymal stromal cells (MSCs) are early progenitors that can differentiate into osteoblasts, chondrocytes, and adipocytes. We hypothesized that osteoblasts and adipocytes utilize distinct bioenergetic pathways during MSC differentiation. To test this hypothesis, we compared the bioenergetic profiles of preosteoblast MC3T3-E1 cells and calvarial osteoblasts with preadipocyte 3T3L1 cells, before and after differentiation. Differentiated MC3T3-E1 osteoblasts met adenosine triphosphate (ATP) demand mainly by glycolysis with minimal reserve glycolytic capacity, whereas nondifferentiated cells generated ATP through oxidative phosphorylation. A marked Crabtree effect (acute suppression of respiration by addition of glucose, observed in both MC3T3-E1 and calvarial osteoblasts) and smaller mitochondrial membrane potential in the differentiated osteoblasts, particularly those incubated at high glucose concentrations, indicated a suppression of oxidative phosphorylation compared with nondifferentiated osteoblasts. In contrast, both nondifferentiated and differentiated 3T3-L1 adipocytes met ATP demand primarily by oxidative phosphorylation despite a large unused reserve glycolytic capacity. In sum, we show that nondifferentiated precursor cells prefer to use oxidative phosphorylation to generate ATP; when they differentiate to osteoblasts, they gain a strong preference for glycolytic ATP generation, but when they differentiate to adipocytes, they retain the strong preference for oxidative phosphorylation. Unique metabolic programming in mesenchymal progenitor cells may influence cell fate and ultimately determine the degree of bone formation and/or the development of marrow adiposity. © 2018 American Society for Bone and Mineral Research. © 2018 American Society for Bone and Mineral Research.

Grid Site Testing for ATLAS with HammerCloud

CERN Document Server

Elmsheuser, J; The ATLAS collaboration; Legger, F; Medrano LLamas, R; Sciacca, G; van der Ster, D

2014-01-01

With the exponential growth of LHC (Large Hadron Collider) data in 2012, distributed computing has become the established way to analyze collider data. The ATLAS grid infrastructure includes more than 130 sites worldwide, ranging from large national computing centers to smaller university clusters. HammerCloud was previously introduced with the goals of enabling VO- and site-administrators to run validation tests of the site and software infrastructure in an automated or on-demand manner. The HammerCloud infrastructure has been constantly improved to support the addition of new test work-flows. These new work-flows comprise e.g. tests of the ATLAS nightly build system, ATLAS MC production system, XRootD federation FAX and new site stress test work-flows. We report on the development, optimization and results of the various components in the HammerCloud framework.

Grid Site Testing for ATLAS with HammerCloud

CERN Document Server

Elmsheuser, J; The ATLAS collaboration; Legger, F; Medrano LLamas, R; Sciacca, G; van der Ster, D

2013-01-01

With the exponential growth of LHC (Large Hadron Collider) data in 2012, distributed computing has become the established way to analyze collider data. The ATLAS grid infrastructure includes more than 130 sites worldwide, ranging from large national computing centers to smaller university clusters. HammerCloud was previously introduced with the goals of enabling VO- and site-administrators to run validation tests of the site and software infrastructure in an automated or on-demand manner. The HammerCloud infrastructure has been constantly improved to support the addition of new test work-flows. These new work-flows comprise e.g. tests of the ATLAS nightly build system, ATLAS MC production system, XRootD federation FAX and new site stress test work-flows. We report on the development, optimization and results of the various components in the HammerCloud framework.

Nano-hydroxyapatite particles induce apoptosis on MC3T3-E1 cells and tissue cells in SD rats

Science.gov (United States)

Wang, Liting; Zhou, Gang; Liu, Haifeng; Niu, Xufeng; Han, Jingyun; Zheng, Lisha; Fan, Yubo

2012-04-01

While the advantages of nanomaterials are being increasingly recognized, their potential toxicity is drawing more and more attention and concern. In this study, we explore the toxicity mechanism of 20-30 nm rod-shaped hydroxyapatite (HA) nanoparticles in vitro and in vivo. The nanoparticles were prepared by precipitation and characterized by IR, XRD and TEM. Concentrations of 0 μg mL-1, 10 μg mL-1, 100 μg mL-1, 1 mg mL-1, and 10 mg mL-1 were applied to the MC3T3-E1 cells for viability (MTT-test). Based on the characteristic differences of the two methods of cell death, the morphological features of the MC3T3-E1 cell line co-cultured with nano-hydroxyapatite (n-HA) (10 mg mL-1) for 24 h were also observed by TEM. Furthermore, important serum biochemical markers and histopathological examinations were used to evaluate the potential toxicological effect of n-HA on the major organs of SD rats injected intraperitoneally with n-HA (33.3 mg kg-1 body weight). In the results, we found cell growth inhibition and apoptosis in MC3T3-E1 cells co-cultured with n-HA. Moreover, apoptosis but not necrosis was illustrated in liver and renal tissue by using histopathology slices and serum biochemical markers. It suggests that apoptosis may be the possible mechanism of n-HA toxicity and provides a better understanding of the biocompatibility of nanomaterials applied in human bone repair.

Cloud Computing Security: A Survey

Directory of Open Access Journals (Sweden)

Issa M. Khalil

2014-02-01

Full Text Available Cloud computing is an emerging technology paradigm that migrates current technological and computing concepts into utility-like solutions similar to electricity and water systems. Clouds bring out a wide range of benefits including configurable computing resources, economic savings, and service flexibility. However, security and privacy concerns are shown to be the primary obstacles to a wide adoption of clouds. The new concepts that clouds introduce, such as multi-tenancy, resource sharing and outsourcing, create new challenges to the security community. Addressing these challenges requires, in addition to the ability to cultivate and tune the security measures developed for traditional computing systems, proposing new security policies, models, and protocols to address the unique cloud security challenges. In this work, we provide a comprehensive study of cloud computing security and privacy concerns. We identify cloud vulnerabilities, classify known security threats and attacks, and present the state-of-the-art practices to control the vulnerabilities, neutralize the threats, and calibrate the attacks. Additionally, we investigate and identify the limitations of the current solutions and provide insights of the future security perspectives. Finally, we provide a cloud security framework in which we present the various lines of defense and identify the dependency levels among them. We identify 28 cloud security threats which we classify into five categories. We also present nine general cloud attacks along with various attack incidents, and provide effectiveness analysis of the proposed countermeasures.

RCW 36 in the Vela Molecular Ridge: Evidence for high-mass star-cluster formation triggered by cloud-cloud collision

Science.gov (United States)

Sano, Hidetoshi; Enokiya, Rei; Hayashi, Katsuhiro; Yamagishi, Mitsuyoshi; Saeki, Shun; Okawa, Kazuki; Tsuge, Kisetsu; Tsutsumi, Daichi; Kohno, Mikito; Hattori, Yusuke; Yoshiike, Satoshi; Fujita, Shinji; Nishimura, Atsushi; Ohama, Akio; Tachihara, Kengo; Torii, Kazufumi; Hasegawa, Yutaka; Kimura, Kimihiro; Ogawa, Hideo; Wong, Graeme F.; Braiding, Catherine; Rowell, Gavin; Burton, Michael G.; Fukui, Yasuo

2018-05-01

A collision between two molecular clouds is one possible candidate for high-mass star formation. The H II region RCW 36, located in the Vela molecular ridge, contains a young star cluster (˜ 1 Myr old) and two O-type stars. We present new CO observations of RCW 36 made with NANTEN2, Mopra, and ASTE using 12CO(J = 1-0, 2-1, 3-2) and 13CO(J = 2-1) emission lines. We have discovered two molecular clouds lying at the velocities VLSR ˜ 5.5 and 9 km s-1. Both clouds are likely to be physically associated with the star cluster, as verified by the good spatial correspondence among the two clouds, infrared filaments, and the star cluster. We also found a high intensity ratio of ˜ 0.6-1.2 for CO J = 3-2/1-0 toward both clouds, indicating that the gas temperature has been increased due to heating by the O-type stars. We propose that the O-type stars in RCW 36 were formed by a collision between the two clouds, with a relative velocity separation of 5 km s-1. The complementary spatial distributions and the velocity separation of the two clouds are in good agreement with observational signatures expected for O-type star formation triggered by a cloud-cloud collision. We also found a displacement between the complementary spatial distributions of the two clouds, which we estimate to be 0.3 pc assuming the collision angle to be 45° relative to the line-of-sight. We estimate the collision timescale to be ˜ 105 yr. It is probable that the cluster age found by Ellerbroek et al. (2013b, A&A, 558, A102) is dominated by the low-mass members which were not formed under the triggering by cloud-cloud collision, and that the O-type stars in the center of the cluster are explained by the collisional triggering independently from the low-mass star formation.

Black carbon mixing state impacts on cloud microphysical properties: effects of aerosol plume and environmental conditions

Energy Technology Data Exchange (ETDEWEB)

Ching, Ping Pui; Riemer, Nicole; West, Matthew

2016-05-27

Black carbon (BC) is usually mixed with other aerosol species within individual aerosol particles. This mixture, along with the particles' size and morphology, determines the particles' optical and cloud condensation nuclei properties, and hence black carbon's climate impacts. In this study the particle-resolved aerosol model PartMC-MOSAIC was used to quantify the importance of black carbon mixing state for predicting cloud microphysical quantities. Based on a set of about 100 cloud parcel simulations a process level analysis framework was developed to attribute the response in cloud microphysical properties to changes in the underlying aerosol population ("plume effect") and the cloud parcel cooling rate ("parcel effect"). It shows that the response of cloud droplet number concentration to changes in BC emissions depends on the BC mixing state. When the aerosol population contains mainly aged BC particles an increase in BC emission results in increasing cloud droplet number concentrations ("additive effect"). In contrast, when the aerosol population contains mainly fresh BC particles they act as sinks for condensable gaseous species, resulting in a decrease in cloud droplet number concentration as BC emissions are increased ("competition effect"). Additionally, we quantified the error in cloud microphysical quantities when neglecting the information on BC mixing state, which is often done in aerosol models. The errors ranged from -12% to +45% for the cloud droplet number fraction, from 0% to +1022% for the nucleation-scavenged black carbon (BC) mass fraction, from -12% to +4% for the effective radius, and from -30% to +60% for the relative dispersion.

Cloud-resolving model intercomparison of an MC3E squall line case: Part I-Convective updrafts: CRM Intercomparison of a Squall Line

Energy Technology Data Exchange (ETDEWEB)

Fan, Jiwen [Pacific Northwest National Laboratory, Richland Washington USA; Han, Bin [Pacific Northwest National Laboratory, Richland Washington USA; School of Atmospheric Sciences, Nanjing University, Nanjing China; Varble, Adam [Department of Atmospheric Sciences, University of Utah, Salt Lake City Utah USA; Morrison, Hugh [National Center for Atmospheric Research, Boulder Colorado USA; North, Kirk [Department of Atmospheric and Oceanic Sciences, McGill University, Montreal Quebec USA; Kollias, Pavlos [Department of Atmospheric and Oceanic Sciences, McGill University, Montreal Quebec USA; School of Marine and Atmospheric Sciences, Stony Brook University, Stony Brook New York USA; Chen, Baojun [School of Atmospheric Sciences, Nanjing University, Nanjing China; Dong, Xiquan [Department of Hydrology and Atmospheric Sciences, University of Arizona, Tucson Arizona USA; Giangrande, Scott E. [Environmental and Climate Sciences Department, Brookhaven National Laboratory, Upton New York USA; Khain, Alexander [The Institute of the Earth Science, The Hebrew University of Jerusalem, Jerusalem Israel; Lin, Yun [Department of Atmospheric Sciences, Texas A& M University, College Station Texas USA; Mansell, Edward [NOAA/OAR/National Severe Storms Laboratory, Norman Oklahoma USA; Milbrandt, Jason A. [Meteorological Research Division, Environment and Climate Change Canada, Dorval Canada; Stenz, Ronald [Department of Atmospheric Sciences, University of North Dakota, Grand Forks North Dakota USA; Thompson, Gregory [National Center for Atmospheric Research, Boulder Colorado USA; Wang, Yuan [Division of Geological and Planetary Sciences, California Institute of Technology, Pasadena California USA

2017-09-06

A constrained model intercomparison study of a mid-latitude mesoscale squall line is performed using the Weather Research & Forecasting (WRF) model at 1-km horizontal grid spacing with eight cloud microphysics schemes, to understand specific processes that lead to the large spread of simulated cloud and precipitation at cloud-resolving scales, with a focus of this paper on convective cores. Various observational data are employed to evaluate the baseline simulations. All simulations tend to produce a wider convective area than observed, but a much narrower stratiform area, with most bulk schemes overpredicting radar reflectivity. The magnitudes of the virtual potential temperature drop, pressure rise, and the peak wind speed associated with the passage of the gust front are significantly smaller compared with the observations, suggesting simulated cool pools are weaker. Simulations also overestimate the vertical velocity and Ze in convective cores as compared with observational retrievals. The modeled updraft velocity and precipitation have a significant spread across the eight schemes even in this strongly dynamically-driven system. The spread of updraft velocity is attributed to the combined effects of the low-level perturbation pressure gradient determined by cold pool intensity and buoyancy that is not necessarily well correlated to differences in latent heating among the simulations. Variability of updraft velocity between schemes is also related to differences in ice-related parameterizations, whereas precipitation variability increases in no-ice simulations because of scheme differences in collision-coalescence parameterizations.

QAaaS in a Cloud IoT Ecosystem

Directory of Open Access Journals (Sweden)

Bogdan GHILIC-MICU

2017-01-01

Full Text Available The current transition state of the global society, both from economic and (mostly technological perspective, goes – again – into overtime. Borrowed from fundamental domains and applied into science and research, the latest technological developments are built on graphene, silicene, phosphorene and stanene. The fourth industrial revolution changes perceptions and redefines the status of the individual, transforming him from con-sumer into pro-sumer of energy. Spintronics stimulates the production of accessories specific to the Internet of Things (IoT, like smart clothes connected to internet and implanted phones. Additionally, technology influences software development methodologies facing us with paradigms that transcend philosophies like green, grid, cloud computing and advance toward a superior manifestation of computer programming: Fog Computing (with the next level being presumably Rainbow Computing. Within this avalanche of transformations, technologies and paradigms, one aspect that has to evolve continuously is the quality assurance (QA. Hidden under various concept or methodology encapsulations, quality assurance in all fields and mostly in technological development and software paradigm play a key role. In an ecosystem defined by the context of Cloud IoT, quality assurance as service becomes a real challenge. In this paper we highlight the ways the ecosystem engages in its development not only things, beings, energies, sensors or objects but also technologies. One such popular technology is cloud computing which, in the context of IoT, sees a spectacular development of its own cluster of services, a potential such service being QAaaS.

3D Point Cloud Reconstruction from Single Plenoptic Image

Directory of Open Access Journals (Sweden)

F. Murgia

2016-06-01

Full Text Available Novel plenoptic cameras sample the light field crossing the main camera lens. The information available in a plenoptic image must be processed, in order to create the depth map of the scene from a single camera shot. In this paper a novel algorithm, for the reconstruction of 3D point cloud of the scene from a single plenoptic image, taken with a consumer plenoptic camera, is proposed. Experimental analysis is conducted on several test images, and results are compared with state of the art methodologies. The results are very promising, as the quality of the 3D point cloud from plenoptic image, is comparable with the quality obtained with current non-plenoptic methodologies, that necessitate more than one image.

Evolution of Cloud Storage as Cloud Computing Infrastructure Service

OpenAIRE

Rajan, Arokia Paul; Shanmugapriyaa

2013-01-01

Enterprises are driving towards less cost, more availability, agility, managed risk - all of which is accelerated towards Cloud Computing. Cloud is not a particular product, but a way of delivering IT services that are consumable on demand, elastic to scale up and down as needed, and follow a pay-for-usage model. Out of the three common types of cloud computing service models, Infrastructure as a Service (IaaS) is a service model that provides servers, computing power, network bandwidth and S...

Sentinel-1 Archive and Processing in the Cloud using the Hybrid Pluggable Processing Pipeline (HyP3) at the ASF DAAC

Science.gov (United States)

Arko, S. A.; Hogenson, R.; Geiger, A.; Herrmann, J.; Buechler, B.; Hogenson, K.

2016-12-01

In the coming years there will be an unprecedented amount of SAR data available on a free and open basis to research and operational users around the globe. The Alaska Satellite Facility (ASF) DAAC hosts, through an international agreement, data from the Sentinel-1 spacecraft and will be hosting data from the upcoming NASA ISRO SAR (NISAR) mission. To more effectively manage and exploit these vast datasets, ASF DAAC has begun moving portions of the archive to the cloud and utilizing cloud services to provide higher-level processing on the data. The Hybrid Pluggable Processing Pipeline (HyP3) project is designed to support higher-level data processing in the cloud and extend the capabilities of researchers to larger scales. Built upon a set of core Amazon cloud services, the HyP3 system allows users to request data processing using a number of canned algorithms or their own algorithms once they have been uploaded to the cloud. The HyP3 system automatically accesses the ASF cloud-based archive through the DAAC RESTful application programming interface and processes the data on Amazon's elastic compute cluster (EC2). Final products are distributed through Amazon's simple storage service (S3) and are available for user download. This presentation will provide an overview of ASF DAAC's activities moving the Sentinel-1 archive into the cloud and developing the integrated HyP3 system, covering both the benefits and difficulties of working in the cloud. Additionally, we will focus on the utilization of HyP3 for higher-level processing of SAR data. Two example algorithms, for sea-ice tracking and change detection, will be discussed as well as the mechanism for integrating new algorithms into the pipeline for community use.

Magnetically actuated mechanical stimuli on Fe3O4/mineralized collagen coatings to enhance osteogenic differentiation of the MC3T3-E1 cells.

Science.gov (United States)

Zhuang, Junjun; Lin, Suya; Dong, Lingqing; Cheng, Kui; Weng, Wenjian

2018-04-15

Mechanical stimuli at the bone-implant interface are considered to activate the mechanotransduction pathway of the cell to improve the initial osseointegration establishment and to guarantee clinical success of the implant. However, control of the mechanical stimuli at the bone-implant interface still remains a challenge. In this study, we have designed a strategy of a magnetically responsive coating on which the mechanical stimuli is controlled because of coating deformation under static magnetic field (SMF). The iron oxide nanoparticle/mineralized collagen (IOP-MC) coatings were electrochemically codeposited on titanium substrates in different quantities of IOPs and distributions; the resulting coatings were verified to possess swelling behavior with flexibility same as that of hydrogel. The relative quantity of IOP to collagen and the IOP distribution in the coatings were demonstrated to play a critical role in mediating cell behavior. The cells present on the outer layer of the distributed IOP-MC (O-IOP-MC) coating with a mass ratio of 0.67 revealed the most distinct osteogenic differentiation activity being promoted, which could be attributed to the maximized mechanical stimuli with exposure to SMF. Furthermore, the enhanced osteogenic differentiation of the stimulated MC3T3-E1 cells originated from magnetically actuated mechanotransduction signaling pathway, embodying the upregulated expression of osteogenic-related and mechanotransduction-related genes. This work therefore provides a promising strategy for implementing mechanical stimuli to activate mechanotransduction on the bone-implant interface and thus to promote osseointegration. The magnetically actuated coating is designed to produce mechanical stimuli to cells for promoting osteogenic differentiation based on the coating deformation. Iron oxide nanoparticles (IOPs) were incorporated into the mineralized collagen coatings (MC) forming the composite coatings (IOP-MC) with spatially distributed IOPs

MOLECULAR CLOUDS IN THE TRIFID NEBULA M20: POSSIBLE EVIDENCE FOR A CLOUD-CLOUD COLLISION IN TRIGGERING THE FORMATION OF THE FIRST GENERATION STARS

International Nuclear Information System (INIS)

Torii, K.; Enokiya, R.; Sano, H.; Yoshiike, S.; Hanaoka, N.; Ohama, A.; Furukawa, N.; Dawson, J. R.; Moribe, N.; Oishi, K.; Nakashima, Y.; Okuda, T.; Yamamoto, H.; Kawamura, A.; Mizuno, N.; Onishi, T.; Fukui, Y.; Maezawa, H.; Mizuno, A.

2011-01-01

A large-scale study of the molecular clouds toward the Trifid Nebula, M20, has been made in the J = 2-1 and J = 1-0 transitions of 12 CO and 13 CO. M20 is ionized predominantly by an O7.5 star HD164492. The study has revealed that there are two molecular components at separate velocities peaked toward the center of M20 and that their temperatures-30-50 K as derived by a large velocity gradient analysis-are significantly higher than the 10 K of their surroundings. We identify the two clouds as the parent clouds of the first generation stars in M20. The mass of each cloud is estimated to be ∼10 3 M sun and their separation velocity is ∼8 km s -1 over ∼1-2 pc. We find that the total mass of stars and molecular gas in M20 is less than ∼3.2 x 10 3 M sun , which is too small by an order of magnitude to gravitationally bind the system. We argue that the formation of the first generation stars, including the main ionizing O7.5 star, was triggered by the collision between the two clouds in a short timescale of ∼1 Myr, a second example alongside Westerlund 2, where a super-star cluster may have been formed due to cloud-cloud collision triggering.

CYANOMETHANIMINE ISOMERS IN COLD INTERSTELLAR CLOUDS: INSIGHTS FROM ELECTRONIC STRUCTURE AND KINETIC CALCULATIONS

Energy Technology Data Exchange (ETDEWEB)

Vazart, Fanny; Latouche, Camille; Skouteris, Dimitrios; Barone, Vincenzo [Scuola Normale Superiore, Piazza dei Cavalieri 7, I-56125 Pisa (Italy); Balucani, Nadia [Dipartimento di Chimica, Biologia e Biotecnologie, Universitá degli Studi di Perugia, Via Elce di Sotto 8, I-06123 Perugia (Italy)

2015-09-10

New insights into the formation of interstellar cyanomethanimine, a species of great relevance in prebiotic chemistry, are provided by electronic structure and kinetic calculations for the reaction CN + CH{sub 2} = NH. This reaction is a facile formation route of Z,E-C-cyanomethanimine, even under the extreme conditions of density and temperature typical of cold interstellar clouds. E-C-cyanomethanimine has been recently identified in Sgr B2(N) in the Green Bank Telescope (GBT) PRIMOS survey by P. Zaleski et al. and no efficient formation routes have been envisaged so far. The rate coefficient expression for the reaction channel leading to the observed isomer E-C-cyanomethanimine is 3.15 × 10-10 × (T/300){sup 0.152} × e{sup (−0.0948/T)}. According to the present study, the more stable Z-C-cyanomethanimine isomer is formed with a slightly larger yield (4.59 × 10{sup −10} × (T/300){sup 0.153} × e{sup (−0.0871/T)}. As the detection of E-isomer is favored due to its larger dipole moment, the missing detection of the Z-isomer can be due to the sensitivity limit of the GBT PRIMOS survey and the detection of the Z-isomer should be attempted with more sensitive instrumentation. The CN + CH{sub 2} = NH reaction can also play a role in the chemistry of the upper atmosphere of Titan where the cyanomethanimine products can contribute to the buildup of the observed nitrogen-rich organic aerosols that cover the moon.

3rd International Symposium on Big Data and Cloud Computing Challenges

CERN Document Server

Neelanarayanan, V

2016-01-01

This proceedings volume contains selected papers that were presented in the 3rd International Symposium on Big data and Cloud Computing Challenges, 2016 held at VIT University, India on March 10 and 11. New research issues, challenges and opportunities shaping the future agenda in the field of Big Data and Cloud Computing are identified and presented throughout the book, which is intended for researchers, scholars, students, software developers and practitioners working at the forefront in their field. This book acts as a platform for exchanging ideas, setting questions for discussion, and sharing the experience in Big Data and Cloud Computing domain.

Parallel Agent-as-a-Service (P-AaaS Based Geospatial Service in the Cloud

Directory of Open Access Journals (Sweden)

Xicheng Tan

2017-04-01

Full Text Available To optimize the efficiency of the geospatial service in the flood response decision making system, a Parallel Agent-as-a-Service (P-AaaS method is proposed and implemented in the cloud. The prototype system and comparisons demonstrate the advantages of our approach over existing methods. The P-AaaS method includes both parallel architecture and a mechanism for adjusting the computational resources—the parallel geocomputing mechanism of the P-AaaS method used to execute a geospatial service and the execution algorithm of the P-AaaS based geospatial service chain, respectively. The P-AaaS based method has the following merits: (1 it inherits the advantages of the AaaS-based method (i.e., avoiding transfer of large volumes of remote sensing data or raster terrain data, agent migration, and intelligent conversion into services to improve domain expert collaboration; (2 it optimizes the low performance and the concurrent geoprocessing capability of the AaaS-based method, which is critical for special applications (e.g., highly concurrent applications and emergency response applications; and (3 it adjusts the computing resources dynamically according to the number and the performance requirements of concurrent requests, which allows the geospatial service chain to support a large number of concurrent requests by scaling up the cloud-based clusters in use and optimizes computing resources and costs by reducing the number of virtual machines (VMs when the number of requests decreases.

COLEC10 is mutated in 3MC patients and regulates early craniofacial development

DEFF Research Database (Denmark)

Munye, Mustafa M.; Diaz-Font, Anna; Ocaka, Louise

2017-01-01

3MC syndrome is an autosomal recessive heterogeneous disorder with features linked to developmental abnormalities. The main features include facial dysmorphism, craniosynostosis and cleft lip/palate; skeletal structures derived from cranial neural crest cells (cNCC). We previously reported...

Airborne observations of cloud properties on HALO during NARVAL

Science.gov (United States)

Konow, Heike; Hansen, Akio; Ament, Felix

2016-04-01

The representation of cloud and precipitation processes is one of the largest sources of uncertainty in climate and weather predictions. To validate model predictions of convective processes over the Atlantic ocean, usually satellite data are used. However, satellite products provide just a coarse view with poor temporal resolution of convective maritime clouds. Aircraft-based observations offer a more detailed insight due to lower altitude and high sampling rates. The research aircraft HALO (High Altitude Long Range Research Aircraft) is operated by the German Aerospace Center (DLR). With a ceiling of 15 km, and a range of 10,000 km and more than 10 hours it is able to reach remote regions and operate from higher altitudes than most other research aircraft. Thus, it provides the unique opportunity to exploit regions of the atmosphere that cannot be easily accessed otherwise. Measurements conducted on HALO provide more detailed insights than achievable from satellite data. Therefore, this measurement platform bridges the gap between previous airborne measurements and satellites. The payload used for this study consists of, amongst others, a suite of passive microwave radiometers, a cloud radar, and a water vapor DIAL. To investigate cloud and precipitation properties of convective maritime clouds, the NARVAL (Next-generation Aircraft Remote-Sensing for Validation Studies) campaign was conducted in winter 2013/2014 out of Barbados and Keflavik (Iceland). This campaign was one of the first that took place on the HALO aircraft. During the experiment's two parts 15 research flights were conducted (8 flights during NARVAL-South out of Barbados to investigate trade-wind cumuli and 7 flights out of Keflavik with focus on mid-latitude cyclonic systems). Flight durations were between five and nine hours, amounting to roughly 118 flight hours overall. 121 dropsondes were deployed. In fall 2016 two additional aircraft campaigns with the same payload will take place: The

Study of clumping in the Cepheus OB 3 molecular cloud

International Nuclear Information System (INIS)

Carr, J.S.

1987-01-01

A portion of the Cep OB 3 molecular cloud has been mapped in the (C-13)O (1-0) line on a completely sampled grid with a 1.5-arcmin spacing. A total of 45 individual clouds, or clumps, have been identified in the map, with masses from 3 to 300 solar mass, sizes 3 pc or smaller, and mean densities of a few hundred/cu cm. Power-law correlations are found among the clump properties, namely, M proportional to R exp 2.5 and Delta(v) exp 0.24. These exponents differ somewhat from those found for similar correlations for molecular clouds in previous studies. Determination of the virial masses for the clumps shows that the clumps are not gravitationally bound and must be expanding on a time scale of about 1 Myr. Measurements of the (C-13)O (2-1) line give volume densities of 2000-5000. Comparisons of these densities with the mean volume densities from the (C-13)O (1-0) data suggest that the gas is clumped on a small scale with a volume filling factor of 0.04-0.10. 31 references

2010/11 McMurdo Station Snow Road Strength and Maintenance

Science.gov (United States)

2017-02-01

McMurdo Station. Part of this study in- cluded tracking the road maintenance and temperature and testing the road strength at predetermined mile...data provides insight as to the direct effects of various maintenance and environmental factors on the strength of the roads . Un- derstanding the...13 4.2 Maintenance vs. road strength

A browser-based 3D Visualization Tool designed for comparing CERES/CALIOP/CloudSAT level-2 data sets.

Science.gov (United States)

Chu, C.; Sun-Mack, S.; Chen, Y.; Heckert, E.; Doelling, D. R.

2017-12-01

In Langley NASA, Clouds and the Earth's Radiant Energy System (CERES) and Moderate Resolution Imaging Spectroradiometer (MODIS) are merged with Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) on the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) and CloudSat Cloud Profiling Radar (CPR). The CERES merged product (C3M) matches up to three CALIPSO footprints with each MODIS pixel along its ground track. It then assigns the nearest CloudSat footprint to each of those MODIS pixels. The cloud properties from MODIS, retrieved using the CERES algorithms, are included in C3M with the matched CALIPSO and CloudSat products along with radiances from 18 MODIS channels. The dataset is used to validate the CERES retrieved MODIS cloud properties and the computed TOA and surface flux difference using MODIS or CALIOP/CloudSAT retrieved clouds. This information is then used to tune the computed fluxes to match the CERES observed TOA flux. A visualization tool will be invaluable to determine the cause of these large cloud and flux differences in order to improve the methodology. This effort is part of larger effort to allow users to order the CERES C3M product sub-setted by time and parameter as well as the previously mentioned visualization capabilities. This presentation will show a new graphical 3D-interface, 3D-CERESVis, that allows users to view both passive remote sensing satellites (MODIS and CERES) and active satellites (CALIPSO and CloudSat), such that the detailed vertical structures of cloud properties from CALIPSO and CloudSat are displayed side by side with horizontally retrieved cloud properties from MODIS and CERES. Similarly, the CERES computed profile fluxes whether using MODIS or CALIPSO and CloudSat clouds can also be compared. 3D-CERESVis is a browser-based visualization tool that makes uses of techniques such as multiple synchronized cursors, COLLADA format data and Cesium.

Insights into highly improved solar-driven photocatalytic oxygen evolution over integrated Ag3PO4/MoS2 heterostructures

Science.gov (United States)

Cui, Xingkai; Yang, Xiaofei; Xian, Xiaozhai; Tian, Lin; Tang, Hua; Liu, Qinqin

2018-04-01

Oxygen evolution has been considered as the rate-determining step in photocatalytic water splitting due to its sluggish four-electron half-reaction rate, the development of oxygen-evolving photocatalysts with well-defined morphologies and superior interfacial contact is highly important for achieving high-performance solar water splitting. Herein, we report the fabrication of Ag3PO4/MoS2 nanocomposites and, for the first time, their use in photocatalytic water splitting into oxygen under LED light illumination. Ag3PO4 nanoparticles were found to be anchored evenly on the surface of MoS2 nanosheets, confirming an efficient hybridization of two semiconductor materials. A maximum oxygen-generating rate of 201.6 mol L-1 g-1 h-1 was determined when 200 mg MoS2 nanosheets were incorporated into Ag3PO4 nanoparticles, which is around 5 times higher than that of bulk Ag3PO4. Obvious enhancements in light-harvesting property, as well as electron-hole separation and charge transportation are revealed by the combination of different characterizations. ESR analysis verified that more active oxygen-containing radicals generate over illuminated Ag3PO4/MoS2 composite photocatalysts rather than irradiated Ag3PO4. The improvement in oxygen evolution performance of Ag3PO4/MoS2 composite photocatalysts is ascribed to wide spectra response in the visible-light region, more efficient charge separation and enhanced oxidation capacity in the valence band (VB). This study provides new insights into the design and development of novel composite photocatalytic materials for solar-to-fuel conversion.

Final Scientific/Technical Report to the U.S. Department of Energy on NOVA's Einstein's Big Idea (Project title: E-mc², A Two-Hour Television Program on NOVA)

Energy Technology Data Exchange (ETDEWEB)

Simpson, Susanne

2007-05-07

A woman in the early 1700s who became one of Europe’s leading interpreters of mathematics and a poor bookbinder who became one of the giants of nineteenth-century science are just two of the pioneers whose stories NOVA explored in Einstein’s Big Idea. This two-hour documentary premiered on PBS in October 2005 and is based on the best-selling book by David Bodanis, E=mc2: A Biography of the World’s Most Famous Equation. The film and book chronicle the scientific challenges and discoveries leading up to Einstein’s startling conclusion that mass and energy are one, related by the formula E = mc².

Mechanotransductive Regulation of Gap-Junction Activity Between MLO-Y4 Osteocyte-Like and MC3T3-E1 Osteoblast-Like Cells in Three-Dimensional Co-Culture.

Science.gov (United States)

Juran, C. M.; Blaber, E. A.; Almeida, E. A. C.

2016-01-01

Cell and animal studies conducted onboard the International Space Station and formerly on Shuttle flights have provided groundbreaking data illuminating the deleterious biological response of bone to mechanical unloading. However the intercellular communicative mechanisms associated with the regulation of bone synthesis and bone resorption cells are still largely unknown. Connexin-43 (CX43), a gap junction protein, is hypothesized to play a significant role in osteoblast and osteocyte signaling. The purpose of this investigation was to evaluate within a novel three-dimensional microenvironment how the osteocyte-osteoblast gap-junction expression changes when cultures are exposed to exaggerated mechanical load. MLO-Y4 osteocyte-like cells were cultured on a 3D-Biotek polystyrene insert and placed in direct contact with an MC3T3-E1 pre-osteoblast co-cultured monolayer and exposed to 48 h of mechanical stimulation (pulsatile fluid flow (PFF) or monolayer cyclic stretch (MCS)) then evaluated for viability, proliferation, metabolism, and CX43 expression. Mono-cultured MLO-Y4 and MC3T3-E1 control experiments were conducted under PFF and MCS stimulation to observe how strain application stimuli (PFF cell membrane shear or MCS cell focal adhesion/attachment loading) initiates different signaling pathways or downstream regulatory controls. TotalLive cell count, viability and metabolic reduction (Trypan Blue, LIVEDead and Alamar Blue analysis respectively) indicate that mechanical activation of MC3T3-E1 cells inhibits proliferation while maintaining an average 1.04E4 reductioncell metabolic rate, *p0.05 n4. MLO-Y4s in monolayer culture increase in number when exposed to MCS loading but the percent of live cells within the population is low (46.3 total count, *p0.05 n4), these results may indicate an apoptotic signaling cascade. PFF stimulation of the three-dimensional co-cultures elicits a universal increase in CX43 in MLO-Y4 and MC3T3-E1 cells, illustrated by

McStas

DEFF Research Database (Denmark)

Willendrup, Peter Kjær; Farhi, Emmanuel; Bergbäck Knudsen, Erik

2014-01-01

experiments. McStas is being actively used for the design-update of the European Spallation Source (ESS) in Lund. This paper includes an introduction to the McStas package, recent and ongoing simulation projects. Further, new features in releases McStas 1.12c and 2.0 are discussed.......The McStas neutron ray-tracing simulation package is a collaboration between Risø DTU, ILL, University of Copenhagen and the PSI. During its lifetime, McStas has evolved to become the world leading software in the area of neutron scattering simulations for instrument design, optimisation, virtual...

Recent Findings Related to Giant Cloud Condensation Nuclei in the Marine Boundary Layer and Impacts on Clouds and Precipitation

Science.gov (United States)

Sorooshian, Armin; Dadashazar, Hossein; Wang, Zhen; Crosbie, Ewan; Brunke, Michael; Zeng, Xubin; Jonsson, Haflidi; Woods, Roy; Flagan, Richard; Seinfeld, John

2017-04-01

This presentation reports on findings from multiple airborne field campaigns off the California coast to understand the sources, nature, and impacts of giant cloud condensation nuclei (GCCN). Aside from sea spray emissions, measurements have revealed that ocean-going ships can be a source of GCCN due to wake and stack emissions off the California coast. Observed particle number concentrations behind 10 ships exceeded those in "control" areas, exhibiting number concentration enhancement ratios (ERs) for minimum threshold diameters of 2, 10, and 20 μm as high as 2.7, 5.5, and 7.5, respectively. The data provide insights into how ER is related to a variety of factors (downwind distance, altitude, ship characteristics such as gross tonnage, length, and beam). The data also provide insight into the extent to which a size distribution parameter and a cloud water chemical measurement can capture the effect of sea salt on marine stratocumulus cloud properties. The two GCCN proxy variables, near-surface particle number concentration for diameter > 5 µm and cloud water chloride concentration, are significantly correlated with each other, and both exhibit expected relationships with other parameters that typically coincide with sea salt emissions. Factors influencing the relationship between these two GCCN proxy measurements will be discussed. When comparing twelve pairs of high and low chloride cloud cases (at fixed liquid water path and cloud drop number concentration), the average drop spectra for high chloride cases exhibit enhanced drop number at diameters exceeding 20 µm, especially above 30 µm. In addition, high chloride cases coincide with enhanced mean columnar R and negative values of precipitation susceptibility. The difference in drop effective radius (re) between high and low chloride conditions decreases with height in cloud, suggesting that some GCCN-produced rain drops precipitate before reaching cloud tops. The sign of cloud responses (i.e., re, R) to

Experience in Collaboration: McDenver at McDonald's.

Science.gov (United States)

Combs, Clarice Sue

2002-01-01

The McDenver at McDonald's project provided a nontraditional, community-based teaching and learning environment for faculty and students in a health, physical education, and recreation (HPER) department and a school of nursing. Children and parents come to McDonald's, children received developmental screenings, and parents completed conferences…

Molecular gas in the H II-region complex RCW 166: Possible evidence for an early phase of cloud-cloud collision prior to the bubble formation

Science.gov (United States)

Ohama, Akio; Kohno, Mikito; Fujita, Shinji; Tsutsumi, Daichi; Hattori, Yusuke; Torii, Kazufumi; Nishimura, Atsushi; Sano, Hidetoshi; Yamamoto, Hiroaki; Tachihara, Kengo; Fukui, Yasuo

2018-05-01

Young H II regions are an important site for the study of O star formation based on distributions of ionized and molecular gas. We reveal that two molecular clouds at ˜48 km s-1 and ˜53 km s-1 are associated with the H II regions G018.149-00.283 in RCW 166 by using the JCMT CO High-Resolution Survey (COHRS) of the 12CO(J = 3-2) emission. G018.149-00.283 comprises a bright ring at 8 μm and an extended H II region inside the ring. The ˜48 km s-1 cloud delineates the ring, and the ˜53 km s-1 cloud is located within the ring, indicating a complementary distribution between the two molecular components. We propose a hypothesis that high-mass stars within G018.149-00.283 were formed by triggering during cloud-cloud collision at a projected velocity separation of ˜5 km s-1. We argue that G018.149-00.283 is in an early evolutionary stage, ˜0.1 Myr after the collision according to the scheme detailed by Habe and Ohta (1992, PASJ, 44, 203), which will be followed by a bubble formation stage like RCW 120. We also suggest that nearby H II regions N21 and N22 are candidates for bubbles possibly formed by cloud-cloud collision. Inoue and Fukui (2013, ApJ, 774, L31) showed that the interface gas becomes highly turbulent and realizes a high-mass accretion rate of 10-3-10-4 M⊙ yr-1 by magnetohydrodynamical numerical simulations, which offers an explanation of the O-star formation. The fairly high frequency of cloud-cloud collision in RCW 166 is probably due to the high cloud density in this part of the Scutum arm.

McDonaldization and Job Insecurity

Directory of Open Access Journals (Sweden)

Emeka W. Dumbili

2013-06-01

Full Text Available The article examines how and why the McDonaldization of banking system in Nigeria engenders job insecurity. This is imperative because it provides an explicit revelation of the root causes of job insecurity in the sector that other scholars have totally omitted. No Nigerian scholar has applied the thesis in relation to job insecurity, which is the major problem in Nigeria’s banking industry. The article based on the analysis of secondary data and observations, therefore, draws on McDonaldization thesis to examine the upsurge of rationalization in the sector since consolidation exercise began in 2005. The article argues that the sector’s rising rationalization and ensuing efficiency, calculability, predictability, and control are necessary. However, these have inevitably engendered job insecurity and its adverse consequences. Based on the critical analyses of available evidence, the article concludes that the best option is to commence resistance of the McDonaldization processes, especially those that replace human with nonhuman technology or make customers unpaid workers.

A new community on the horizon: CS3 — Cloud Services for Synchronization and Sharing

CERN Multimedia

CERN. Geneva

2018-01-01

CS3 (Cloud Services for Synchronization and Sharing) is a new and growing community, which was initiated at the kick-off event in 2014 at CERN.  Over the past few years CS3 workshops have become a point of excellence for cloud storage services and featured four editions hosted across Europe: CERN, ETH Zurich, SURFSara Amsterdam and CYFRONET Krakow. The distinct mark of CS3 is that it grew bottom-up, without a central entity being a sponsor or providing top-down funding.  At CS3 the industry leaders such as Dropbox present alongside startups or confirmed SMEs. CS3 also provides a discussion forum: what is the future of on-premise services deployed “in your lab” in the era of global transformation of the IT industry with the advent of commercial  (“public”) cloud services on a massive scale? One of the strengths of the on-premise model for research institutions is the integration of cloud storage and file sharing services with other services available on site: Data Analysis Services, Cloud Infrastr...

RenderSelect: a Cloud Broker Framework for Cloud Renderfarm Services

OpenAIRE

Ruby, Annette J; Aisha, Banu W; Subash, Chandran P

2016-01-01

In the 3D studios the animation scene files undergo a process called as rendering, where the 3D wire frame models are converted into 3D photorealistic images. As the rendering process is both a computationally intensive and a time consuming task, the cloud services based rendering in cloud render farms is gaining popularity among the animators. Though cloud render farms offer many benefits, the animators hesitate to move from their traditional offline rendering to cloud services based render ...

Observations of HC3N, HC5N, and HC7N in molecular clouds

International Nuclear Information System (INIS)

Snell, R.L.; Schloerb, F.P.; Young, J.S.; Hjalmarson, A.; Friberg, P.

1981-01-01

We present observations of HC 3 N, HC 5 N, and HC 7 N in five molecular clouds. Statistical equilibrium calculations have been performed for HC 5 N and HC 7 N and compared with our data and data on other transitions of these molecules reported in the literature to derive the densities and the column densities of the cyanopolyynes in these clouds. We derive densities for TMC 1, TMC 2, and L1544 of between 1 and 4 x 10 4 cm -3 . We have found that the ratios of the cyanopolyynes in these three clouds are the following: HC 3 N/HC 5 Nroughly-equal1.4 and HC 5 N/HC 7 Nroughly-equal3. In L134 N and DR 21(OH) we have measured limits on the HC 5 N emission and find the HC 3 N/HC 5 N ratio to be substantially greater than in the three Taurus clouds. We have also compared the cyanopolyyne column densities with those of 13 CO and find that the abundance of HC 3 N in L134 N and DR 21(OH) is an order of magnitude smaller than that found in the Taurus clouds. The chemical differences between L134 N and the Taurus clouds are particularly interesting in view of their similar physical properties

Osteogenic differentiation of MC3T3-E1 cells on poly(L-lactide)/Fe{sub 3}O{sub 4} nanofibers with static magnetic field exposure

Energy Technology Data Exchange (ETDEWEB)

Cai, Qing [State Key Laboratory of Organic–inorganic Composites, Beijing University of Chemical Technology, Beijing 100029 (China); Beijing Laboratory of Biomedical Materials, Beijing University of Chemical Technology, Beijing 100029 (China); Shi, Yuzhou; Shan, Dingying; Jia, Wenkai; Duan, Shun [Beijing Laboratory of Biomedical Materials, Beijing University of Chemical Technology, Beijing 100029 (China); Deng, Xuliang [Department of Geriatric Dentistry, Peking University School and Hospital of Stomatology, Beijing 100081 (China); Yang, Xiaoping, E-mail: yangxp@mail.buct.edu.cn [State Key Laboratory of Organic–inorganic Composites, Beijing University of Chemical Technology, Beijing 100029 (China); Beijing Laboratory of Biomedical Materials, Beijing University of Chemical Technology, Beijing 100029 (China)

2015-10-01

Proliferation and differentiation of bone-related cells are modulated by many factors such as scaffold design, growth factor, dynamic culture system, and physical simulation. Nanofibrous structure and moderate-intensity (1 mT–1 T) static magnetic field (SMF) have been identified as capable of stimulating proliferation and differentiation of osteoblasts. Herein, magnetic nanofibers were prepared by electrospinning mixture solutions of poly(L-lactide) (PLLA) and ferromagnetic Fe{sub 3}O{sub 4} nanoparticles (NPs). The PLLA/Fe{sub 3}O{sub 4} composite nanofibers demonstrated homogeneous dispersion of Fe{sub 3}O{sub 4} NPs, and their magnetism depended on the contents of Fe{sub 3}O{sub 4} NPs. SMF of 100 mT was applied in the culture of MC3T3-E1 osteoblasts on pure PLLA and PLLA/Fe{sub 3}O{sub 4} composite nanofibers for the purpose of studying the effect of SMF on osteogenic differentiation of osteoblastic cells on magnetic nanofibrous scaffolds. On non-magnetic PLLA nanofibers, the application of external SMF could enhance the proliferation and osteogenic differentiation of MC3T3-E1 cells. In comparison with pure PLLA nanofibers, the incorporation of Fe{sub 3}O{sub 4} NPs could also promote the proliferation and osteogenic differentiation of MC3T3-E1 cells in the absence or presence of external SMF. The marriage of magnetic nanofibers and external SMF was found most effective in accelerating every aspect of biological behaviors of MC3T3-E1 osteoblasts. The findings demonstrated that the magnetic feature of substrate and microenvironment were applicable ways in regulating osteogenesis in bone tissue engineering. - Highlights: • Magnetic nanofibers containing well-dispersed Fe{sub 3}O{sub 4} nanoparticles were produced. • Static magnetic field (SMF) was applied to perform the culture of osteoblasts. • Osteogenic differentiation was enhanced on magnetic substrate with exposure to SMF.

VM Capacity-Aware Scheduling within Budget Constraints in IaaS Clouds.

Directory of Open Access Journals (Sweden)

Vasileios Thanasias

Full Text Available Recently, cloud computing has drawn significant attention from both industry and academia, bringing unprecedented changes to computing and information technology. The infrastructure-as-a-Service (IaaS model offers new abilities such as the elastic provisioning and relinquishing of computing resources in response to workload fluctuations. However, because the demand for resources dynamically changes over time, the provisioning of resources in a way that a given budget is efficiently utilized while maintaining a sufficing performance remains a key challenge. This paper addresses the problem of task scheduling and resource provisioning for a set of tasks running on IaaS clouds; it presents novel provisioning and scheduling algorithms capable of executing tasks within a given budget, while minimizing the slowdown due to the budget constraint. Our simulation study demonstrates a substantial reduction up to 70% in the overall task slowdown rate by the proposed algorithms.

VM Capacity-Aware Scheduling within Budget Constraints in IaaS Clouds.

Science.gov (United States)

Thanasias, Vasileios; Lee, Choonhwa; Hanif, Muhammad; Kim, Eunsam; Helal, Sumi

2016-01-01

Recently, cloud computing has drawn significant attention from both industry and academia, bringing unprecedented changes to computing and information technology. The infrastructure-as-a-Service (IaaS) model offers new abilities such as the elastic provisioning and relinquishing of computing resources in response to workload fluctuations. However, because the demand for resources dynamically changes over time, the provisioning of resources in a way that a given budget is efficiently utilized while maintaining a sufficing performance remains a key challenge. This paper addresses the problem of task scheduling and resource provisioning for a set of tasks running on IaaS clouds; it presents novel provisioning and scheduling algorithms capable of executing tasks within a given budget, while minimizing the slowdown due to the budget constraint. Our simulation study demonstrates a substantial reduction up to 70% in the overall task slowdown rate by the proposed algorithms.

Sensitive method for the determination of different S(IV) species in cloud and fog water.

Science.gov (United States)

Lammel, G

1996-08-01

Suppressed ion chromatography has been applied to the determination of S(IV) species in cloud and fog water in the range 0.012-2.4 mg S(IV)-S/L. The samples have been preserved prior to storage and S(IV) species have been determined as hydroxy methanesulfonate (HMS) together with the low molecular weight carboxylic acid anions, formate and acetate. Samples have been divided and treated differently such that total S(IV) as well as the non-oxidizable fraction of S(IV) (as given by the reactivity with H(2)O(2), added in surplus) could be determined. The difference between the two corresponds to the S(IV) fraction subjected to oxididation, which is of paramount interest in cloud and fogwater chemistry.

Towards 3D Matching of Point Clouds Derived from Oblique and Nadir Airborne Imagery

Science.gov (United States)

Zhang, Ming

Because of the low-expense high-efficient image collection process and the rich 3D and texture information presented in the images, a combined use of 2D airborne nadir and oblique images to reconstruct 3D geometric scene has a promising market for future commercial usage like urban planning or first responders. The methodology introduced in this thesis provides a feasible way towards fully automated 3D city modeling from oblique and nadir airborne imagery. In this thesis, the difficulty of matching 2D images with large disparity is avoided by grouping the images first and applying the 3D registration afterward. The procedure starts with the extraction of point clouds using a modified version of the RIT 3D Extraction Workflow. Then the point clouds are refined by noise removal and surface smoothing processes. Since the point clouds extracted from different image groups use independent coordinate systems, there are translation, rotation and scale differences existing. To figure out these differences, 3D keypoints and their features are extracted. For each pair of point clouds, an initial alignment and a more accurate registration are applied in succession. The final transform matrix presents the parameters describing the translation, rotation and scale requirements. The methodology presented in the thesis has been shown to behave well for test data. The robustness of this method is discussed by adding artificial noise to the test data. For Pictometry oblique aerial imagery, the initial alignment provides a rough alignment result, which contains a larger offset compared to that of test data because of the low quality of the point clouds themselves, but it can be further refined through the final optimization. The accuracy of the final registration result is evaluated by comparing it to the result obtained from manual selection of matched points. Using the method introduced, point clouds extracted from different image groups could be combined with each other to build a

Three-moment representation of rain in a cloud microphysics model

Science.gov (United States)

Paukert, M.; Fan, J.; Rasch, P. J.; Morrison, H.; Milbrandt, J.; Khain, A.; Shpund, J.

2017-12-01

Two-moment microphysics schemes have been commonly used for cloud simulation in models across different scales - from large-eddy simulations to global climate models. These schemes have yielded valuable insights into cloud and precipitation processes, however the size distributions are limited to two degrees of freedom, and thus the shape parameter is typically fixed or diagnosed. We have developed a three-moment approach for the rain category in order to provide an additional degree of freedom to the size distribution and thereby improve the cloud microphysics representations for more accurate weather and climate simulations. The approach is applied to the Predicted Particle Properties (P3) scheme. In addition to the rain number and mass mixing ratios predicted in the two-moment P3, we now include prognostic equations for the sixth moment of the size distribution (radar reflectivity), thus allowing the shape parameter to evolve freely. We employ the spectral bin microphysics (SBM) model to formulate the three-moment process rates in P3 for drop collisions and breakup. We first test the three-moment scheme with a maritime stratocumulus case from the VOCALS field campaign, and compare the model results with respect to cloud and precipitation properties from the new P3 scheme, original two-moment P3 scheme, SBM, and in-situ aircraft measurements. The improved simulation results by the new P3 scheme will be discussed and physically explained.

Vision-Based 3D Motion Estimation for On-Orbit Proximity Satellite Tracking and Navigation

Science.gov (United States)

2015-06-01

development, computer rendered 3D videos were created in order to test and debug the algorithm. Computer rendered videos allow full control of all the...printed using the Fortus 400mc 3D rapid- prototyping printer of the NPS Space Systems Academic Group, while the internal structure is made of aluminum...CC.ImageSize(1)); Y=[Y,y]; X=[X,x]; end B. MATLAB RIGID CLOUD Below is provided the code used to create a 3D rigid cloud of points rotating and

Bone morphogenetic protein-2 (BMP-2 and transforming growth factor-β1 (TGF-β1 alter connexin 43 phosphorylation in MC3T3-E1 Cells

Directory of Open Access Journals (Sweden)

Rudkin George H

2001-07-01

Full Text Available Abstract Background Bone morphogenetic proteins (BMPs and transforming growth factor-βs (TGF-βs are important regulators of bone repair and regeneration. BMP-2 and TGF-β1 have been shown to inhibit gap junctional intercellular communication (GJIC in MC3T3-E1 cells. Connexin 43 (Cx43 has been shown to mediate GJIC in osteoblasts and it is the predominant gap junctional protein expressed in these murine osteoblast-like cells. We examined the expression, phosphorylation, and subcellular localization of Cx43 after treatment with BMP-2 or TGF-β1 to investigate a possible mechanism for the inhibition of GJIC. Results Northern blot analysis revealed no detectable change in the expression of Cx43 mRNA. Western blot analysis demonstrated no significant change in the expression of total Cx43 protein. However, significantly higher ratios of unphosphorylated vs. phosphorylated forms of Cx43 were detected after BMP-2 or TGF-β1 treatment. Immunofluorescence and cell protein fractionation revealed no detectable change in the localization of Cx43 between the cytosol and plasma membrane. Conclusions BMP-2 and TGF-β1 do not alter expression of Cx43 at the mRNA or protein level. BMP-2 and TGF-β1 may inhibit GJIC by decreasing the phosphorylated form of Cx43 in MC3T3-E1 cells.

Cloud services in organization

OpenAIRE

FUXA, Jan

2013-01-01

The work deals with the definition of the word cloud computing, cloud computing models, types, advantages, disadvantages, and comparing SaaS solutions such as: Google Apps and Office 365 in the area of electronic communications. The work deals with the use of cloud computing in the corporate practice, both good and bad practice. The following section describes the methodology for choosing the appropriate cloud service organization. Another part deals with analyzing the possibilities of SaaS i...

Orchestrating Your Cloud Orchestra

OpenAIRE

Hindle, Abram

2015-01-01

Cloud computing potentially ushers in a new era of computer music performance with exceptionally large computer music instruments consisting of 10s to 100s of virtual machines which we propose to call a `cloud-orchestra'. Cloud computing allows for the rapid provisioning of resources, but to deploy such a complicated and interconnected network of software synthesizers in the cloud requires a lot of manual work, system administration knowledge, and developer/operator skills. This is a barrier ...

Hybrid Pluggable Processing Pipeline (HyP3): A cloud-based infrastructure for generic processing of SAR data

Science.gov (United States)

Hogenson, K.; Arko, S. A.; Buechler, B.; Hogenson, R.; Herrmann, J.; Geiger, A.

2016-12-01

A problem often faced by Earth science researchers is how to scale algorithms that were developed against few datasets and take them to regional or global scales. One significant hurdle can be the processing and storage resources available for such a task, not to mention the administration of those resources. As a processing environment, the cloud offers nearly unlimited potential for compute and storage, with limited administration required. The goal of the Hybrid Pluggable Processing Pipeline (HyP3) project was to demonstrate the utility of the Amazon cloud to process large amounts of data quickly and cost effectively, while remaining generic enough to incorporate new algorithms with limited administration time or expense. Principally built by three undergraduate students at the ASF DAAC, the HyP3 system relies on core Amazon services such as Lambda, the Simple Notification Service (SNS), Relational Database Service (RDS), Elastic Compute Cloud (EC2), Simple Storage Service (S3), and Elastic Beanstalk. The HyP3 user interface was written using elastic beanstalk, and the system uses SNS and Lamdba to handle creating, instantiating, executing, and terminating EC2 instances automatically. Data are sent to S3 for delivery to customers and removed using standard data lifecycle management rules. In HyP3 all data processing is ephemeral; there are no persistent processes taking compute and storage resources or generating added cost. When complete, HyP3 will leverage the automatic scaling up and down of EC2 compute power to respond to event-driven demand surges correlated with natural disaster or reprocessing efforts. Massive simultaneous processing within EC2 will be able match the demand spike in ways conventional physical computing power never could, and then tail off incurring no costs when not needed. This presentation will focus on the development techniques and technologies that were used in developing the HyP3 system. Data and process flow will be shown

Caregiver Insightfulness and Young Children’s Violence Exposure: Testing a Relational Model of Risk and Resilience

Science.gov (United States)

Gray, Sarah A. O.; Forbes, Danielle; Briggs-Gowan, Margaret; Carter, Alice S.

2016-01-01

This study employed a relational post-traumatic stress frame to explore the co-contribution of young children’s exposure to violence and caregiver insightfulness on child behavioral outcomes in a high-risk, non-referred sample of caregivers and preschoolers (n = 64; mean age 3.83 years, SD = .77). Caregiver insightfulness did not have a main effect on child outcomes but did moderate the relation between violence exposure and child behavior across all observed outcomes. Violence-exposed children with non-insightful caregivers demonstrated higher caregiver-rated internalizing and externalizing behaviors and observer-rated negative affect than all other groups. Among children not exposed to violence, insightfulness was not related to children’s behavior problems or negative affect, suggesting violence-specific processes. Though cross-sectional, results suggest that the effects of violence and caregiver insightfulness on child outcomes are contingent on one another and that caregiver insightfulness may play a protective role in contexts of violence. PMID:26503175

Molecular-cloud-scale Chemical Composition. II. Mapping Spectral Line Survey toward W3(OH) in the 3 mm Band

Energy Technology Data Exchange (ETDEWEB)

Nishimura, Yuri [Institute of Astronomy, The University of Tokyo, 2-21-1, Osawa, Mitaka, Tokyo 181-0015 (Japan); Watanabe, Yoshimasa; Yamamoto, Satoshi [Department of Physics, The University of Tokyo, 7-3-1, Hongo, Bunkyo-ku, Tokyo 113-0033 (Japan); Harada, Nanase [Academia Sinica Institute of Astronomy and Astrophysics, No.1, Sec. 4, Roosevelt Road, 10617 Taipei, Taiwan, R.O.C. (China); Shimonishi, Takashi [Frontier Research Institute for Interdisciplinary Sciences, Tohoku University, Aramakiazaaoba 6-3, Aoba-ku, Sendai, Miyagi 980-8578 (Japan); Sakai, Nami [RIKEN, 2-1 Hirosawa, Wako, Saitama 351-0198 (Japan); Aikawa, Yuri [Department of Astronomy, The University of Tokyo, 7-3-1, Hongo, Bunkyo-ku, Tokyo 113-0033 (Japan); Kawamura, Akiko [Chile Observatory, National Astronomical Observatory of Japan, 2-21-1, Osawa, Mitaka, Tokyo 181-8588 (Japan)

2017-10-10

To study a molecular-cloud-scale chemical composition, we conducted a mapping spectral line survey toward the Galactic molecular cloud W3(OH), which is one of the most active star-forming regions in the Perseus arm. We conducted our survey through the use of the Nobeyama Radio Observatory 45 m telescope, and observed the area of 16′ × 16′, which corresponds to 9.0 pc × 9.0 pc. The observed frequency ranges are 87–91, 96–103, and 108–112 GHz. We prepared the spectrum averaged over the observed area, in which eight molecular species (CCH, HCN, HCO{sup +}, HNC, CS, SO, C{sup 18}O, and {sup 13}CO) are identified. On the other hand, the spectrum of the W3(OH) hot core observed at a 0.17 pc resolution shows the lines of various molecules such as OCS, H{sub 2}CS CH{sub 3}CCH, and CH{sub 3}CN in addition to the above species. In the spatially averaged spectrum, emission of the species concentrated just around the star-forming core, such as CH{sub 3}OH and HC{sub 3}N, is fainter than in the hot core spectrum, whereas emission of the species widely extended over the cloud such as CCH is relatively brighter. We classified the observed area into five subregions according to the integrated intensity of {sup 13}CO, and evaluated the contribution to the averaged spectrum from each subregion. The CCH, HCN, HCO{sup +}, and CS lines can be seen even in the spectrum of the subregion with the lowest {sup 13}CO integrated intensity range (<10 K km s{sup −1}). Thus, the contributions of the spatially extended emission is confirmed to be dominant in the spatially averaged spectrum.

Detection of Rare G3P[19] Porcine Rotavirus Strains in Chiang Mai, Thailand, Provides Evidence for Origin of the VP4 Genes of Mc323 and Mc345 Human Rotaviruses▿

Science.gov (United States)

Maneekarn, Niwat; Khamrin, Pattara; Chan-it, Wisoot; Peerakome, Supatra; Sukchai, Sujin; Pringprao, Kidsadagon; Ushijima, Hiroshi

2006-01-01

Among 175 fecal specimens collected from diarrheic piglets during a surveillance of porcine rotavirus (PoRV) strains in Chiang Mai, Thailand, 39 (22.3%) were positive for group A rotaviruses. Of these, 33.3% (13 of 39) belonged to G3P[19], which was a rare P genotype seldom reported. Interestingly, their VP4 nucleotide sequences were most closely related to human P[19] strains (Mc323 and Mc345) isolated in 1989 from the same geographical area where these PoRV strains were isolated. These P[19] PoRV strains were also closely related to another human P[19] strain (RMC321), isolated from India in 1990. The VP4 sequence identities with human P[19] were 95.4% to 97.4%, while those to a porcine P[19] strain (4F) were only 87.6 to 89.1%. Phylogenetic analysis of the VP4 gene revealed that PoRV P[19] strains clustered with human P[19] strains in a monophyletic branch separated from strain 4F. Analysis of the VP7 gene confirmed that these strains belonged to the G3 genotype and shared 97.7% to 98.3% nucleotide identities with other G3 PoRV strains circulating in the regions. This close genetic relationship was also reflected in the phylogenetic analysis of their VP7 genes. Altogether, the findings provided peculiar evidence that supported the porcine origin of VP4 genes of Mc323 and Mc345 human rotaviruses. PMID:16988014

Cloud Computing Security Issue: Survey

Science.gov (United States)

Kamal, Shailza; Kaur, Rajpreet

2011-12-01

Cloud computing is the growing field in IT industry since 2007 proposed by IBM. Another company like Google, Amazon, and Microsoft provides further products to cloud computing. The cloud computing is the internet based computing that shared recourses, information on demand. It provides the services like SaaS, IaaS and PaaS. The services and recourses are shared by virtualization that run multiple operation applications on cloud computing. This discussion gives the survey on the challenges on security issues during cloud computing and describes some standards and protocols that presents how security can be managed.

Research on cloud computing solutions

Directory of Open Access Journals (Sweden)

Liudvikas Kaklauskas

2015-07-01

Full Text Available Cloud computing can be defined as a new style of computing in which dynamically scala-ble and often virtualized resources are provided as a services over the Internet. Advantages of the cloud computing technology include cost savings, high availability, and easy scalability. Voas and Zhang adapted six phases of computing paradigms, from dummy termi-nals/mainframes, to PCs, networking computing, to grid and cloud computing. There are four types of cloud computing: public cloud, private cloud, hybrid cloud and community. The most common and well-known deployment model is Public Cloud. A Private Cloud is suited for sensitive data, where the customer is dependent on a certain degree of security.According to the different types of services offered, cloud computing can be considered to consist of three layers (services models: IaaS (infrastructure as a service, PaaS (platform as a service, SaaS (software as a service. Main cloud computing solutions: web applications, data hosting, virtualization, database clusters and terminal services. The advantage of cloud com-puting is the ability to virtualize and share resources among different applications with the objective for better server utilization and without a clustering solution, a service may fail at the moment the server crashes.DOI: 10.15181/csat.v2i2.914

Pain in workers with shoulder impingement syndrome: an assessment using the DASH and McGill pain questionnaires Dor em trabalhadores portadores da síndrome do impacto do ombro: uma avaliação através dos questionários DASH e McGill de dor

Directory of Open Access Journals (Sweden)

PR Camargo

2007-04-01

Full Text Available OBJECTIVE: This study assessed physical function and pain in male and female workers with shoulder impingement syndrome using the Brazilian Portuguese versions of the Disabilities of the Arm, Shoulder and Hand (DASH and McGill pain questionnaires. METHODS: Twenty-seven assembly line workers (18 men and 9 women; mean age of 33.26 ± 6.49 years in the school supply industry were evaluated. The duration of the shoulder impingement pain was 31.74 ± 32.92 months and the amount of time of the workers in this industry was 11.08 ± 6.41 years. The DASH questionnaire was used to evaluate functional status and symptoms of the upper limbs of the workers. Using the McGill Pain Questionnaire, the pain was quantified by the number of words chosen and by the pain rating index (PRI. RESULTS: The women presented higher scores (POBJETIVO: Este estudo avaliou função física e dor em trabalhadores com síndrome do impacto através das versões brasileiras dos questionários "Disabilities of the Arm, Shoulder and Hand" (DASH e McGill de dor. MÉTODO: Vinte e sete trabalhadores (18 homens e 9 mulheres; idade média de 33,26 ± 6,49 anos de uma linha de produção de uma indústria de material escolar foram avaliados. O tempo de duração de dor no ombro era de 31,74 ± 32,92 meses e o tempo de trabalho na indústria era de 11,08 ± 6,41 anos. O questionário DASH foi utilizado para avaliar o estado funcional e os sintomas dos membros superiores dos trabalhadores. Através do questionário McGill de dor, a dor foi quantificada pelo número de palavras escolhidas e pelo índice de classificação da dor (ICD. RESULTADOS: As mulheres apresentaram maiores escores (P< 0,05 que os homens para ambos os módulos do DASH. As mulheres escolheram mais palavras (17,00 ± 2,59 que os homens (13,33 ± 3,16 e também apresentaram o maior ICD total (P< 0,05. CONCLUSÃO: Os resultados obtidos neste grupo de trabalhadores brasileiros com síndrome do impacto do ombro identificam os

The use of marine cloud water samples as a diagnostic tool for aqueous chemistry, cloud microphysical processes and dynamics

Science.gov (United States)

Crosbie, E.; Ziemba, L. D.; Moore, R.; Shook, M.; Jordan, C.; Thornhill, K. L., II; Winstead, E.; Shingler, T.; Brown, M.; MacDonald, A. B.; Dadashazar, H.; Sorooshian, A.; Weiss-Penzias, P. S.; Anderson, B.

2017-12-01

Clouds play several roles in the Earth's climate system. In addition to their clear significance to the hydrological cycle, they strongly modulate the shortwave and longwave radiative balance of the atmosphere, with subsequent feedback on the atmospheric circulation. Furthermore, clouds act as a conduit for the fate and emergence of important trace chemical species and are the predominant removal mechanism for atmospheric aerosols. Marine boundary layer clouds cover large swaths of the global oceans. Because of their global significance, they have attracted significant attention into understanding how changes in aerosols are translated into changes in cloud macro- and microphysical properties. The circular nature of the influence of clouds-on-aerosols and aerosols-on-clouds has been used to explain the chaotic patterns often seen in marine clouds, however, this feedback also presents a substantial hurdle in resolving the uncertain role of anthropogenic aerosols on climate. Here we discuss ways in which the chemical constituents found in cloud water can offer insight into the physical and chemical processes inherent in marine clouds, through the use of aircraft measurements. We focus on observational data from cloud water samples collected during flights conducted over the remote North Atlantic and along coastal California across multiple campaigns. We explore topics related to aqueous processing, wet scavenging and source apportionment.

Reconstruction of 3D Shapes of Opaque Cumulus Clouds from Airborne Multiangle Imaging: A Proof-of-Concept

Science.gov (United States)

Davis, A. B.; Bal, G.; Chen, J.

2015-12-01

Operational remote sensing of microphysical and optical cloud properties is invariably predicated on the assumption of plane-parallel slab geometry for the targeted cloud. The sole benefit of this often-questionable assumption about the cloud is that it leads to one-dimensional (1D) radiative transfer (RT)---a textbook, computationally tractable model. We present new results as evidence that, thanks to converging advances in 3D RT, inverse problem theory, algorithm implementation, and computer hardware, we are at the dawn of a new era in cloud remote sensing where we can finally go beyond the plane-parallel paradigm. Granted, the plane-parallel/1D RT assumption is reasonable for spatially extended stratiform cloud layers, as well as the smoothly distributed background aerosol layers. However, these 1D RT-friendly scenarios exclude cases that are critically important for climate physics. 1D RT---whence operational cloud remote sensing---fails catastrophically for cumuliform clouds that have fully 3D outer shapes and internal structures driven by shallow or deep convection. For these situations, the first order of business in a robust characterization by remote sensing is to abandon the slab geometry framework and determine the 3D geometry of the cloud, as a first step toward bone fide 3D cloud tomography. With this specific goal in mind, we deliver a proof-of-concept for an entirely new kind of remote sensing applicable to 3D clouds. It is based on highly simplified 3D RT and exploits multi-angular suites of cloud images at high spatial resolution. Airborne sensors like AirMSPI readily acquire such data. The key element of the reconstruction algorithm is a sophisticated solution of the nonlinear inverse problem via linearization of the forward model and an iteration scheme supported, where necessary, by adaptive regularization. Currently, the demo uses a 2D setting to show how either vertical profiles or horizontal slices of the cloud can be accurately reconstructed

Cloudbus Toolkit for Market-Oriented Cloud Computing

Science.gov (United States)

Buyya, Rajkumar; Pandey, Suraj; Vecchiola, Christian

This keynote paper: (1) presents the 21st century vision of computing and identifies various IT paradigms promising to deliver computing as a utility; (2) defines the architecture for creating market-oriented Clouds and computing atmosphere by leveraging technologies such as virtual machines; (3) provides thoughts on market-based resource management strategies that encompass both customer-driven service management and computational risk management to sustain SLA-oriented resource allocation; (4) presents the work carried out as part of our new Cloud Computing initiative, called Cloudbus: (i) Aneka, a Platform as a Service software system containing SDK (Software Development Kit) for construction of Cloud applications and deployment on private or public Clouds, in addition to supporting market-oriented resource management; (ii) internetworking of Clouds for dynamic creation of federated computing environments for scaling of elastic applications; (iii) creation of 3rd party Cloud brokering services for building content delivery networks and e-Science applications and their deployment on capabilities of IaaS providers such as Amazon along with Grid mashups; (iv) CloudSim supporting modelling and simulation of Clouds for performance studies; (v) Energy Efficient Resource Allocation Mechanisms and Techniques for creation and management of Green Clouds; and (vi) pathways for future research.

Inner solar system material discovered in the Oort cloud.

Science.gov (United States)

Meech, Karen J; Yang, Bin; Kleyna, Jan; Hainaut, Olivier R; Berdyugina, Svetlana; Keane, Jacqueline V; Micheli, Marco; Morbidelli, Alessandro; Wainscoat, Richard J

2016-04-01

We have observed C/2014 S3 (PANSTARRS), a recently discovered object on a cometary orbit coming from the Oort cloud that is physically similar to an inner main belt rocky S-type asteroid. Recent dynamical models successfully reproduce the key characteristics of our current solar system; some of these models require significant migration of the giant planets, whereas others do not. These models provide different predictions on the presence of rocky material expelled from the inner solar system in the Oort cloud. C/2014 S3 could be the key to verifying these predictions of the migration-based dynamical models. Furthermore, this object displays a very faint, weak level of comet-like activity, five to six orders of magnitude less than that of typical ice-rich comets on similar Orbits coming from the Oort cloud. For the nearly tailless appearance, we are calling C/2014 S3 a Manx object. Various arguments convince us that this activity is produced by sublimation of volatile ice, that is, normal cometary activity. The activity implies that C/2014 S3 has retained a tiny fraction of the water that is expected to be present at its formation distance in the inner solar system. We may be looking at fresh inner solar system Earth-forming material that was ejected from the inner solar system and preserved for billions of years in the Oort cloud.

Phil Wallace and Theoretical Physics at McGill in the 1950's: A Personal Perspective

Energy Technology Data Exchange (ETDEWEB)

Jackson, John David

2010-11-18

In 1946 Philip (Phil) Russell Wallace joined the Mathematics Department of McGill University as an Associate Professor of Applied Mathematics, apparently because A. H. S. Gillson, Dean of Arts and Science, wanted theoretical physicists to be in the Mathematics Department. He came with the dream of creating a theoretical physics group at McGill. By the spring of 1949, Phil was authorized to recruit two junior faculty in Mathematics. He hired Theodore (Ted) F. Morris from U. Toronto, who joined in September 1949, and me, who came in January 1950. The group had begun. Phil Wallace was born in Toronto in 1915 and grew up there. He entered the University of Toronto in 1933, earned a B.A. in mathematics in 1937, a M.A. in 1938, and a Ph.D. in applied mathematics in 1940 under Leopold Infeld. His Ph.D. thesis in general relativity was entitled 'On the relativistic equations of motion in electromagnetic theory.' In 1940 World War II had engulfed Europe and was having its effect on Canada, but the US was still at peace. L. J. Synge, Head of the Applied Mathematics Department at Toronto, told Wallace that people such as he would be needed in war work, but things were not ready quite yet. Hold yourself ready. Phil took a two-year position as lecturer in mathematics at the University of Cincinnati (1940-42); in the fall of 1942 he became a lecturer in mathematics at M.I.T. It was from there that he was recruited by Synge to join the war effort from 1943 to 1946 at N.R.C.'s Montreal Laboratory, the genesis of the Canadian Atomic Energy Project. Phil has described those heady wartime years in these pages. Much of the effort of the theoretical physicists was on nuclear reactor theory and the properties of relevant materials, such as graphite, under long and intense neutron bombardment. In late 1945 Phil was sent for four months to Bristol to learn about the properties of graphite from the esteemed N. F. Mott. This exposure led Phil to a life-long interest in

On coincidence of Pettis and McShane integrability

Czech Academy of Sciences Publication Activity Database

Fabian, Marián

2015-01-01

Roč. 65, č. 1 (2015), s. 83-106 ISSN 0011-4642 R&D Projects: GA ČR(CZ) GAP201/12/0290 Institutional support: RVO:67985840 Keywords : Pettis integral * McShane integral * MC-filling family Subject RIV: BA - General Mathematics Impact factor: 0.284, year: 2015 http://link.springer.com/article/10.1007/s10587-015-0161-x

Calibrated HDRI in 3D point clouds

DEFF Research Database (Denmark)

Bülow, Katja; Tamke, Martin

2017-01-01

the challenges of dynamic smart lighting planning in outdoor urban space. This paper presents findings on how 3D capturing of outdoor environments combined with HDRI establishes a new way for analysing and representing the spatial distribution of light in combination with luminance data.......3D-scanning technologies and point clouds as means for spatial representation introduce a new paradigm to the measuring and mapping of physical artefacts and space. This technology also offers possibilities for the measuring and mapping of outdoor urban lighting and has the potential to meet...

Linarin isolated from Buddleja officinalis prevents hydrogen peroxide-induced dysfunction in osteoblastic MC3T3-E1 cells.

Science.gov (United States)

Kim, Young Ho; Lee, Young Soon; Choi, Eun Mi

2011-01-01

The flowers and leaves buds of Buddleja officinalis MAXIM (Buddlejaceae) are used to treat eye troubles, hernia, gonorrhea and liver troubles in Asia. To elucidate the protective effects of linarin isolated from B. officinalis on the response of osteoblast to oxidative stress, osteoblastic MC3T3-E1 cells were pre-incubated with linarin for 1h before treatment with 0.3mM H(2)O(2) for 48h, and markers of osteoblast function and oxidative damage were examined. Linarin significantly (P<0.05) increased cell survival, alkaline phosphatase (ALP) activity, collagen content, calcium deposition, and osteocalcin secretion and decreased the production of receptor activator of nuclear factor-kB ligand (RANKL), protein carbonyl (PCO), and malondialdehyde (MDA) of osteoblastic MC3T3-E1 cells in the presence of hydrogen peroxide. These results demonstrate that linarin can protect osteoblasts against hydrogen peroxide-induced osteoblastic dysfunction and may exert anti-resorptive actions, at least in part, via the reduction of RANKL and oxidative damage. 2011 Elsevier Inc. All rights reserved.

Comparison of Cloud backup performance and costs in Oracle database

Directory of Open Access Journals (Sweden)

Aljaž Zrnec

2011-06-01

Full Text Available Normal 0 21 false false false SL X-NONE X-NONE Current practice of backing up data is based on using backup tapes and remote locations for storing data. Nowadays, with the advent of cloud computing a new concept of database backup emerges. The paper presents the possibility of making backup copies of data in the cloud. We are mainly focused on performance and economic issues of making backups in the cloud in comparison to traditional backups. We tested the performance and overall costs of making backup copies of data in Oracle database using Amazon S3 and EC2 cloud services. The costs estimation was performed on the basis of the prices published on Amazon S3 and Amazon EC2 sites.

Joint classification and contour extraction of large 3D point clouds

Science.gov (United States)

Hackel, Timo; Wegner, Jan D.; Schindler, Konrad

2017-08-01

We present an effective and efficient method for point-wise semantic classification and extraction of object contours of large-scale 3D point clouds. What makes point cloud interpretation challenging is the sheer size of several millions of points per scan and the non-grid, sparse, and uneven distribution of points. Standard image processing tools like texture filters, for example, cannot handle such data efficiently, which calls for dedicated point cloud labeling methods. It turns out that one of the major drivers for efficient computation and handling of strong variations in point density, is a careful formulation of per-point neighborhoods at multiple scales. This allows, both, to define an expressive feature set and to extract topologically meaningful object contours. Semantic classification and contour extraction are interlaced problems. Point-wise semantic classification enables extracting a meaningful candidate set of contour points while contours help generating a rich feature representation that benefits point-wise classification. These methods are tailored to have fast run time and small memory footprint for processing large-scale, unstructured, and inhomogeneous point clouds, while still achieving high classification accuracy. We evaluate our methods on the semantic3d.net benchmark for terrestrial laser scans with >109 points.

Cirrus Cloud Optical Thickness and Effective Diameter Retrieved by MODIS: Impacts of Single Habit Assumption, 3-D Radiative Effects, and Cloud Inhomogeneity

Science.gov (United States)

Zhou, Yongbo; Sun, Xuejin; Mielonen, Tero; Li, Haoran; Zhang, Riwei; Li, Yan; Zhang, Chuanliang

2018-01-01

For inhomogeneous cirrus clouds, cloud optical thickness (COT) and effective diameter (De) provided by the Moderate Resolution Imaging Spectrometer (MODIS) Collection 6 cloud products are associated with errors due to the single habit assumption (SHA), independent pixel assumption (IPA), photon absorption effect (PAE), and plane-parallel assumption (PPA). SHA means that every cirrus cloud is assumed to have the same shape habit of ice crystals. IPA errors are caused by three-dimensional (3D) radiative effects. PPA and PAE errors are caused by cloud inhomogeneity. We proposed a method to single out these different errors. These errors were examined using the Spherical Harmonics Discrete Ordinate Method simulations done for the MODIS 0.86 μm and 2.13 μm bands. Four midlatitude and tropical cirrus cases were studied. For the COT retrieval, the impacts of SHA and IPA were especially large for optically thick cirrus cases. SHA errors in COT varied distinctly with scattering angles. For the De retrieval, SHA decreased De under most circumstances. PAE decreased De for optically thick cirrus cases. For the COT and De retrievals, the dominant error source was SHA for overhead sun whereas for oblique sun, it could be any of SHA, IPA, and PAE, varying with cirrus cases and sun-satellite viewing geometries. On the domain average, the SHA errors in COT (De) were within -16.1%-42.6% (-38.7%-2.0%), whereas the 3-D radiative effects- and cloud inhomogeneity-induced errors in COT (De) were within -5.6%-19.6% (-2.9%-8.0%) and -2.6%-0% (-3.7%-9.8%), respectively.

Marketing Communication of Mc Donald´s

OpenAIRE

Baiduanova, Amina

2017-01-01

This bachelor thesis is an analysis of the marketing communications that are used by a large fast food corporation; their application and effectiveness. The main aim is to determine the main directions of the marketing mix in the company, to analyse the current situation, identify gaps and develop concrete proposals and recommendations for the improvement of the marketing mix in the business on the example of McDonald's. At the beginning of this thesis is presented the general information on ...

[Effects of sintered bone modified with surface mineralization/P24 peptide composite biomaterial on the adhesion, proliferation and osteodifferentiation of MC3T3-E1 cells].

Science.gov (United States)

Li, Jingfeng; Zheng, Qixin; Guo, Xiaodong; Chen, Liaobin

2014-10-01

In the present research, the effects of sintered bone modified with surface mineralization/P24 peptide composite biomaterials on the adhesion, proliferation and osteodifferentiation of MC3T3-E1 cells were investigated. The experiments were divided into three groups due to biomaterials used: Group A (composite materials of sintered bone modified with surface mineralization and P24, a peptide of bone morphogenetic protein-2); Group B (sintered bone modified with surface mineralization) and Group C (sintered bone only). The three groups were observed by scanning electron microscopy (SEM) before the experiments, respectively. Then MC3T3-E1 cells were cultured on the surfaces of the three kinds of material, respectively. The cell adhesion rate was assessed by precipitation method. The proliferative ability of MC3T3-E1 cells were measured with MTT assay. And the ALP staining and measurement of alkaline phosphatase (ALP) activity were performed to assess the differentiation of cells into osteoblasts. The SEM results showed that the materials in the three groups retained the natural pore structure and the pore sizes were in the range between 200-850 μm. The adhesive ratio measurements and MTT assay suggested that adhesion and proliferation of MC3T3-E1 cells in Group A were much higher than those in Group B and Group C (P bone modified with surface mineralization/P24 composite material was confirmed to improve the adhesion rate and proliferation and osteodifferentiation of MC3T3-E1 cells, and maintained their morphology.

Magnetic seismology of interstellar gas clouds: Unveiling a hidden dimension.

Science.gov (United States)

Tritsis, Aris; Tassis, Konstantinos

2018-05-11

Stars and planets are formed inside dense interstellar molecular clouds by processes imprinted on the three-dimensional (3D) morphology of the clouds. Determining the 3D structure of interstellar clouds remains challenging because of projection effects and difficulties measuring the extent of the clouds along the line of sight. We report the detection of normal vibrational modes in the isolated interstellar cloud Musca, allowing determination of the 3D physical dimensions of the cloud. We found that Musca is vibrating globally, with the characteristic modes of a sheet viewed edge on, not the characteristics of a filament as previously supposed. We reconstructed the physical properties of Musca through 3D magnetohydrodynamic simulations, reproducing the observed normal modes and confirming a sheetlike morphology. Copyright © 2018 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works.

Chapter 3: Evaluating the impacts of carbonaceous aerosols on clouds and climate

Energy Technology Data Exchange (ETDEWEB)

Menon, Surabi; Del Genio, Anthony D.

2007-09-03

Any attempt to reconcile observed surface temperature changes within the last 150 years to changes simulated by climate models that include various atmospheric forcings is sensitive to the changes attributed to aerosols and aerosol-cloud-climate interactions, which are the main contributors that may well balance the positive forcings associated with greenhouse gases, absorbing aerosols, ozone related changes, etc. These aerosol effects on climate, from various modeling studies discussed in Menon (2004), range from +0.8 to -2.4 W m{sup -2}, with an implied value of -1.0 W m{sup -2} (range from -0.5 to -4.5 W m{sup -2}) for the aerosol indirect effects. Quantifying the contribution of aerosols and aerosol-cloud interactions remain complicated for several reasons some of which are related to aerosol distributions and some to the processes used to represent their effects on clouds. Aerosol effects on low lying marine stratocumulus clouds that cover much of the Earth's surface (about 70%) have been the focus of most of prior aerosol-cloud interaction effect simulations. Since cumulus clouds (shallow and deep convective) are short lived and cover about 15 to 20% of the Earth's surface, they are not usually considered as radiatively important. However, the large amount of latent heat released from convective towers, and corresponding changes in precipitation, especially in biomass regions due to convective heating effects (Graf et al. 2004), suggest that these cloud systems and aerosol effects on them, must be examined more closely. The radiative heating effects for mature deep convective systems can account for 10-30% of maximum latent heating effects and thus cannot be ignored (Jensen and Del Genio 2003). The first study that isolated the sensitivity of cumulus clouds to aerosols was from Nober et al. (2003) who found a reduction in precipitation in biomass burning regions and shifts in circulation patterns. Aerosol effects on convection have been included in

GPM GROUND VALIDATION CONICAL SCANNING MILLIMETER-WAVE IMAGING RADIOMETER (COSMIR) MC3E V1

Data.gov (United States)

National Aeronautics and Space Administration — The GPM Ground Validation Conical Scanning Millimeter-wave Imaging Radiometer (COSMIR) MC3E dataset used the Conical Scanning Millimeter-wave Imaging Radiometer...

Cloud Computing: A study of cloud architecture and its patterns

OpenAIRE

Mandeep Handa,; Shriya Sharma

2015-01-01

Cloud computing is a general term for anything that involves delivering hosted services over the Internet. Cloud computing is a paradigm shift following the shift from mainframe to client–server in the early 1980s. Cloud computing can be defined as accessing third party software and services on web and paying as per usage. It facilitates scalability and virtualized resources over Internet as a service providing cost effective and scalable solution to customers. Cloud computing has...

BYOD och Cloud Computing : En vägledande studie för hur BYOD bör bedrivas säkert tillsammans med cloud computing

OpenAIRE

Abramian, Fredrik; Wedholm, Joel

2013-01-01

Syftet med denna uppsats är att få en insikt i hur informationssäkerhetsarbetet påverkas av Bring Your Own Device (BYOD) i kombination med cloud computing. Författarna har kommit fram till sin slutsats genom att utföra intervjuer på två olika verksamheter samt en enkätundersökning som sedan har analyserats med aktuell teori. Utifrån detta har en kravspecifikation tagits fram som ett vägledande bidrag för organisationer. The aim of this thesis is to gain a richer insight into how informati...

EVALUATING CHAMBERLAIN'S, McGREGOR'S, AND McRAE'S ...

African Journals Online (AJOL)

2012-08-08

Aug 8, 2012 ... spine and base of skull radiographs which however have diagnostic challenges due to the complexity of the ... McGregor's and Mc Rae's using CT bone windows ... metastatic lesion were excluded from the study. RESULTS.

Wind Magnetic Clouds for the Period 2013 - 2015: Model Fitting, Types, Associated Shock Waves, and Comparisons to Other Periods

Science.gov (United States)

Lepping, R. P.; Wu, C.-C.; Berdichevsky, D. B.; Szabo, A.

2018-04-01

We give the results of parameter fitting of the magnetic clouds (MCs) observed by the Wind spacecraft for the three-year period 2013 to the end of 2015 (called the "Present" period) using the MC model of Lepping, Jones, and Burlaga ( J. Geophys. Res. 95, 11957, 1990). The Present period is almost coincident with the solar maximum of the sunspot number, which has a broad peak starting in about 2012 and extending to almost 2015. There were 49 MCs identified in the Present period. The modeling gives MC quantities such as size, axial attitude, field handedness, axial magnetic-field strength, center time, and closest-approach vector. Derived quantities are also estimated, such as axial magnetic flux, axial current density, and total axial current. Quality estimates are assigned representing excellent, fair/good, and poor. We provide error estimates on the specific fit parameters for the individual MCs, where the poor cases are excluded. Model-fitting results that are based on the Present period are compared to the results of the full Wind mission from 1995 to the end of 2015 (Long-term period), and compared to the results of two other recent studies that encompassed the periods 2007 - 2009 and 2010 - 2012, inclusive. We see that during the Present period, the MCs are, on average, slightly slower, slightly weaker in axial magnetic field (by 8.7%), and larger in diameter (by 6.5%) than those in the Long-term period. However, in most respects, the MCs in the Present period are significantly closer in characteristics to those of the Long-term period than to those of the two recent three-year periods. However, the rate of occurrence of MCs for the Long-term period is 10.3 year^{-1}, whereas this rate for the Present period is 16.3 year^{-1}, similar to that of the period 2010 - 2012. Hence, the MC occurrence rate has increased appreciably in the last six years. MC Type (N-S, S-N, All N, All S, etc.) is assigned to each MC; there is an inordinately large percentage of All S

A Lightweight Surface Reconstruction Method for Online 3D Scanning Point Cloud Data Oriented toward 3D Printing

Directory of Open Access Journals (Sweden)

Buyun Sheng

2018-01-01

Full Text Available The existing surface reconstruction algorithms currently reconstruct large amounts of mesh data. Consequently, many of these algorithms cannot meet the efficiency requirements of real-time data transmission in a web environment. This paper proposes a lightweight surface reconstruction method for online 3D scanned point cloud data oriented toward 3D printing. The proposed online lightweight surface reconstruction algorithm is composed of a point cloud update algorithm (PCU, a rapid iterative closest point algorithm (RICP, and an improved Poisson surface reconstruction algorithm (IPSR. The generated lightweight point cloud data are pretreated using an updating and rapid registration method. The Poisson surface reconstruction is also accomplished by a pretreatment to recompute the point cloud normal vectors; this approach is based on a least squares method, and the postprocessing of the PDE patch generation was based on biharmonic-like fourth-order PDEs, which effectively reduces the amount of reconstructed mesh data and improves the efficiency of the algorithm. This method was verified using an online personalized customization system that was developed with WebGL and oriented toward 3D printing. The experimental results indicate that this method can generate a lightweight 3D scanning mesh rapidly and efficiently in a web environment.

The Travails of Criticality: Understanding Peter McLaren's Revolutionary Vocation. An Article Review of Peter McLaren, "Pedagogy of Insurrection" (New York: Peter Lang, 2015)

Science.gov (United States)

Baldacchino, John

2017-01-01

This is an article review of Peter McLaren's "Pedagogy of Insurrection" (New York: Peter Lang, 2015). While it seeks to position McLaren's work within the context of critical pedagogy, this paper also assesses McLaren from the wider discussion of Marxist--Hegelian discourse as it evolved within the Left. Engaging with McLaren critically,…

Satellite retrieval of cloud condensation nuclei concentrations by using clouds as CCN chambers

Science.gov (United States)

Rosenfeld, Daniel; Zheng, Youtong; Hashimshoni, Eyal; Pöhlker, Mira L.; Jefferson, Anne; Pöhlker, Christopher; Yu, Xing; Zhu, Yannian; Liu, Guihua; Yue, Zhiguo; Fischman, Baruch; Li, Zhanqing; Giguzin, David; Goren, Tom; Artaxo, Paulo; Pöschl, Ulrich

2016-01-01

Quantifying the aerosol/cloud-mediated radiative effect at a global scale requires simultaneous satellite retrievals of cloud condensation nuclei (CCN) concentrations and cloud base updraft velocities (Wb). Hitherto, the inability to do so has been a major cause of high uncertainty regarding anthropogenic aerosol/cloud-mediated radiative forcing. This can be addressed by the emerging capability of estimating CCN and Wb of boundary layer convective clouds from an operational polar orbiting weather satellite. Our methodology uses such clouds as an effective analog for CCN chambers. The cloud base supersaturation (S) is determined by Wb and the satellite-retrieved cloud base drop concentrations (Ndb), which is the same as CCN(S). Validation against ground-based CCN instruments at Oklahoma, at Manaus, and onboard a ship in the northeast Pacific showed a retrieval accuracy of ±25% to ±30% for individual satellite overpasses. The methodology is presently limited to boundary layer not raining convective clouds of at least 1 km depth that are not obscured by upper layer clouds, including semitransparent cirrus. The limitation for small solar backscattering angles of <25° restricts the satellite coverage to ∼25% of the world area in a single day. PMID:26944081

Formation of the young compact cluster GM 24 triggered by a cloud-cloud collision

Science.gov (United States)

Fukui, Yasuo; Kohno, Mikito; Yokoyama, Keiko; Nishimura, Atsushi; Torii, Kazufumi; Hattori, Yusuke; Sano, Hidetoshi; Ohama, Akio; Yamamoto, Hiroaki; Tachihara, Kengo

2018-05-01

High-mass star formation is an important step which controls galactic evolution. GM 24 is a heavily obscured star cluster including a single O9 star with more than ˜100 lower-mass stars within a 0.3 pc radius toward (l, b) ˜ (350.5°, 0.96°), close to the Galactic mini-starburst NGC 6334. We found two velocity components associated with the cluster by new observations of 12CO J =2-1 emission, whereas the cloud was previously considered to be single. We found that the distribution of the two components of 5 {km}s-1 separation shows complementary distribution; the two fit well with each other if a relative displacement of 3 pc is applied along the Galactic plane. A position-velocity diagram of the GM 24 cloud is explained by a model based on numerical simulations of two colliding clouds, where an intermediate velocity component created by the collision is taken into account. We estimate the collision time scale to be ˜Myr in projection of a relative motion tilted to the line of sight by 45°. The results lend further support for cloud-cloud collision as an important mechanism of high-mass star formation in the Carina-Sagittarius Arm.

The Country of Origin and Consumer Ethnocentrism Effects in the Evaluation of a Global Brand: the case of McDonald’s

Directory of Open Access Journals (Sweden)

Vivian Iara Strehlau

2011-06-01

Full Text Available The objective of this study is to analyze the influence of country of origin and ethnocentrism on the image of a brand known internationally – the fast food company McDonald’s – and observe if there exist differences in the evaluation of brand image based on gender, age and socio-economic class. The work begins with a contextualization, followed by a review of the main concepts applied: evaluation of a global brand, consumer ethnocentrism and country of origin effect. A survey based on a non-probabilistic sample was carried out and 275 individuals from the city of Sao Paulo filled in a questionnaire comprised of questions aimed to measure socio-demographic data and three scales, each one to measure country of origin effect, consumer ethnocentrism and brand evaluation of McDonald’s. It was verified that, although the level of ethnocentrism does not interfere in brand image, the country of origin effect is useful to discriminate respondents in relation to the positiveness of their evaluation towards the brand McDonald’s: individuals that evaluate negatively the United States as a country, tend to evaluate negatively McDonald’s as well. Young consumers, women and individuals with higher income evaluated more positively the brand under study, as well as its country of origin. It was verified a positive and linear relationship between country of origin and brand image evaluations.

3D High Resolution l1-SPIRiT Reconstruction on Gadgetron based Cloud

DEFF Research Database (Denmark)