WorldWideScience

Sample records for clinical-ct scan correlations

  1. Biomechanical Role of Bone Anisotropy Estimated on Clinical CT Scans by Image Registration.

    Science.gov (United States)

    Taghizadeh, Elham; Reyes, Mauricio; Zysset, Philippe; Latypova, Adeliya; Terrier, Alexandre; Büchler, Philippe

    2016-08-01

    Image-based modeling is a popular approach to perform patient-specific biomechanical simulations. Accurate modeling is critical for orthopedic application to evaluate implant design and surgical planning. It has been shown that bone strength can be estimated from the bone mineral density (BMD) and trabecular bone architecture. However, these findings cannot be directly and fully transferred to patient-specific modeling since only BMD can be derived from clinical CT. Therefore, the objective of this study was to propose a method to predict the trabecular bone structure using a µCT atlas and an image registration technique. The approach has been evaluated on femurs and patellae under physiological loading. The displacement and ultimate force for femurs loaded in stance position were predicted with an error of 2.5% and 3.7%, respectively, while predictions obtained with an isotropic material resulted in errors of 7.3% and 6.9%. Similar results were obtained for the patella, where the strain predicted using the registration approach resulted in an improved mean squared error compared to the isotropic model. We conclude that the registration of anisotropic information from of a single template bone enables more accurate patient-specific simulations from clinical image datasets than isotropic model.

  2. Correlation analysis of cortical geometry of tibia and humerus of white leghorns using clinical quantitative computed tomography and microcomputed tomography scans1.

    Science.gov (United States)

    Regmi, P; Cox, A G; Robison, C I; Karcher, D M

    2017-03-24

    Peripheral quantitative computed tomography (QCT) has been used in poultry bone research in recent years to analyze cortical and cross-sectional geometry. For QCT to be used as a standard research tool for analysis of bones of laying hens (cortical thickness correlate the cortical parameters measured using clinical CT scans with the measurements from micro-CT, the current gold standard. A total of 15 tibiae and 14 humeri of Lohmann White hens was scanned using clinical CT and micro-CT. Reconstruction of the scans generated images with final voxel resolution of 195 μm for clinical CT scans and 46 μm for micro-CT scans. Cortical and total area were measured using MIMICS® software at proximal, middle, and distal locations of 20 mm sections of humerus diaphysis and 30 mm sections of tibia diaphysis. The total area for proximal and middle locations as well as proximal cortical area measurements for humeri produced strong correlation coefficients (R ≥ 0.70). Moderate strength correlation coefficients (R = 0.40 to 0.60) in humeri were seen in middle and distal cortical areas. Distal total area in humeri displayed a weak correlation coefficient (R ≤ 0.3; P = 0.25). Overall, tibiae demonstrated a weaker correlation. Proximal and middle cortical areas indicated moderate correlation coefficients (R = 0.40 to 0.60), while proximal and middle total areas accompanied by distal cortical and total area displayed weak correlation coefficients (R ≤ 0.3). Only the middle cortical area measurement for tibiae was significant (P = 0.03). These results indicate stronger correlation for humeri measurements among the scans than tibia. Overall, cross-sectional area measurements were only low to moderately correlated between clinical and micro-CT scans. © 2017 Poultry Science Association Inc.

  3. Correlative photoactivated localization and scanning electron microscopy.

    Directory of Open Access Journals (Sweden)

    Benjamin G Kopek

    Full Text Available The ability to localize proteins precisely within subcellular space is crucial to understanding the functioning of biological systems. Recently, we described a protocol that correlates a precise map of fluorescent fusion proteins localized using three-dimensional super-resolution optical microscopy with the fine ultrastructural context of three-dimensional electron micrographs. While it achieved the difficult simultaneous objectives of high photoactivated fluorophore preservation and ultrastructure preservation, it required a super-resolution optical and specialized electron microscope that is not available to many researchers. We present here a faster and more practical protocol with the advantage of a simpler two-dimensional optical (Photoactivated Localization Microscopy (PALM and scanning electron microscope (SEM system that retains the often mutually exclusive attributes of fluorophore preservation and ultrastructure preservation. As before, cryosections were prepared using the Tokuyasu protocol, but the staining protocol was modified to be amenable for use in a standard SEM without the need for focused ion beam ablation. We show the versatility of this technique by labeling different cellular compartments and structures including mitochondrial nucleoids, peroxisomes, and the nuclear lamina. We also demonstrate simultaneous two-color PALM imaging with correlated electron micrographs. Lastly, this technique can be used with small-molecule dyes as demonstrated with actin labeling using phalloidin conjugated to a caged dye. By retaining the dense protein labeling expected for super-resolution microscopy combined with ultrastructural preservation, simplifying the tools required for correlative microscopy, and expanding the number of useful labels we expect this method to be accessible and valuable to a wide variety of researchers.

  4. Correlative photoactivated localization and scanning electron microscopy.

    Science.gov (United States)

    Kopek, Benjamin G; Shtengel, Gleb; Grimm, Jonathan B; Clayton, David A; Hess, Harald F

    2013-01-01

    The ability to localize proteins precisely within subcellular space is crucial to understanding the functioning of biological systems. Recently, we described a protocol that correlates a precise map of fluorescent fusion proteins localized using three-dimensional super-resolution optical microscopy with the fine ultrastructural context of three-dimensional electron micrographs. While it achieved the difficult simultaneous objectives of high photoactivated fluorophore preservation and ultrastructure preservation, it required a super-resolution optical and specialized electron microscope that is not available to many researchers. We present here a faster and more practical protocol with the advantage of a simpler two-dimensional optical (Photoactivated Localization Microscopy (PALM)) and scanning electron microscope (SEM) system that retains the often mutually exclusive attributes of fluorophore preservation and ultrastructure preservation. As before, cryosections were prepared using the Tokuyasu protocol, but the staining protocol was modified to be amenable for use in a standard SEM without the need for focused ion beam ablation. We show the versatility of this technique by labeling different cellular compartments and structures including mitochondrial nucleoids, peroxisomes, and the nuclear lamina. We also demonstrate simultaneous two-color PALM imaging with correlated electron micrographs. Lastly, this technique can be used with small-molecule dyes as demonstrated with actin labeling using phalloidin conjugated to a caged dye. By retaining the dense protein labeling expected for super-resolution microscopy combined with ultrastructural preservation, simplifying the tools required for correlative microscopy, and expanding the number of useful labels we expect this method to be accessible and valuable to a wide variety of researchers.

  5. CT scan correlates of gesture recognition.

    Science.gov (United States)

    Ferro, J M; Martins, I P; Mariano, G; Caldas, A C

    1983-10-01

    The ability to recognise gestures was studied in 65 left-hemispheric stroke patients whose lesions were located by CT scan. In the acute stage (first month) frontal lobe and basal ganglia were frequently involved in patients showing inability to recognise gestures. In the later (third to fourth month) and chronic stages (greater than 6 months) parietal lobe involvement was important; lesions causing gesture recognition impairment were larger, had more extensive and frequent parietal involvement and produced less temporal lobe damage than those causing aural comprehension defects. These findings are discussed in the light of recent models of cerebral localisation of complex functions.

  6. Confocal laser scanning microscopy image correlation for nanoparticle flow velocimetry

    CERN Document Server

    Jun, Brian; Yang, Haisheng; Main, Russell; Vlachos, Pavlos

    2016-01-01

    We present a new particle image correlation technique for resolving nanoparticle flow velocity using confocal laser scanning microscopy (CLSM). The two primary issues that complicate nanoparticle scanning laser image correlation (SLIC) based velocimetry are (1) the use of diffusion dominated nanoparticles as flow tracers, which introduce a random decorrelating error into the velocity estimate, and (2) the effects of the scanning laser image acquisition, which introduces a bias error. To date, no study has quantified these errors or demonstrated a means to deal with them in SLIC velocimetry. In this work, we build upon the robust phase correlation (RPC) and existing methods of SLIC to quantify and mitigate these errors. First, we implement an ensemble RPC instead of using an ensemble standard cross correlation, and develop an SLIC optimal filter that maximizes the correlation strength in order to reliably and accurately detect the correlation peak representing the most probable average displacement of the nano...

  7. Low Cost Scan Test by Test Correlation Utilization

    Institute of Scientific and Technical Information of China (English)

    Ozgur Sinanoglu

    2007-01-01

    Scan-based testing methodologies remedy the testability problem of sequential circuits; yet they suffer from prolonged test time and excessive test power due to numerous shift operations. The correlation among test data along with the high density of the unspecified bits in test data enables the utilization of the existing test data in the scan chain for the generation of the subsequent test stimulus, thus reducing both test time and test data volume. We propose a pair of scan approaches in this paper; in the first approach, a test stimulus partially consists of the preceding stimulus, while in the second approach, a test stimulus partially consists of the preceding test response bits. Both proposed scan-based test schemes access only a subset of scan cells for loading the subsequent test stimulus while freezing the remaining scan cells with the preceding test data, thus decreasing scan chain transitions during shift operations. The proposed scan architecture is coupled with test data manipulation techniques which include test stimuli ordering and partitioning algorithms, boosting test time reductions. The experimental results confirm that test time reductions exceeding 97%,and test power reductions exceeding 99% can be achieved by the proposed scan-based testing methodologies on larger ISCAS89 benchmark circuits.

  8. THE ULTRASOUND SCAN ASPECT CORRELATED WITH THE POLYCYSTIC OVARY SYNDROME

    Directory of Open Access Journals (Sweden)

    Raluca Grigoriu

    2015-11-01

    Full Text Available The Polycystic Ovary Syndrome is one of the most frequentendocrine diseases when talking about women whoreached the reproduction age, having an estimated incidence of 5 - 40% and it represents 75% of the cases of anovulatoryinfertility. This personal study represents a retrospective analysis of a total number of 321 patients diagnosed withpolycystic ovary syndrome (PCOS in the period of time between 2010 and 2014 from the clinical, paraclinical andstatistical point of view. The patients were systematically assessed in time and underwent a medical therapeutic method inthe Clinic of Obstetrics-Gynaecology of the Emergency County Hospital Bacău. The patients included in the study werefollowed during their hospitalization, but also after that, in order to study the evolution of the case. They were performedtransabdominal and transvaginal ultrasonography scans, as they are extremely important in the algorithm of paraclinicaldiagnostic. Based on the data we collected we can now state that in 69% of the cases the ultrasound scan was thepredominant criterion for diagnosing polycystic ovaries. For the rest of the cases, including the ones with a normalultrasound scan of the ovaries, the diagnostic was established after correlating the clinical data with the other paraclinalones, as agreed in the Rotterdam consensus. About 7-8% of the women having a reproductive age are affected by thepolycystic ovary syndrome, so this is considered to be the main cause of infertility in women, and also the mostfrequently met endocrine disease in women.

  9. A research prototype system for quantum-counting clinical CT

    Science.gov (United States)

    Kappler, S.; Glasser, F.; Janssen, S.; Kraft, E.; Reinwand, M.

    2010-04-01

    Recent publications emphasize the benefits of quantum-counting applied to the field of Computed Tomography (CT). We present a research prototype scanner with a CdTe-based quantum-counting detector and 20 cm field-of-view (FOV). As of today there is no direct converter material on the market able to operate reliably in the harsh high-flux regime of clinical CT scanners. Nevertheless, we investigate the CT imaging performance that could be expected with high-flux capable material. Therefore we chose pixel sizes of 0.05 mm2, a good compromise between high-flux counting ability and energy resolution. Every pixel is equipped with two energy threshold counters, enabling contrast-optimization and dual-energy scans. We present a first quantitative analysis of contrast measurements, in which we limit ourselves to a low-flux scenario. Using an Iodine-based contrast agent, we find 17% contrast enhancement at 120 kVp, compared to energy-integrating CT. In addition, the general dual-energy capability was confirmed in first measurements. We conclude our work by demonstrating good agreement of measurement results and detailed CT-system simulations.

  10. Small-animal CT: Its difference from, and impact on, clinical CT

    Science.gov (United States)

    Ritman, Erik L.

    2007-10-01

    For whole-body computed tomography (CT) images of small rodents, a voxel resolution of at least 10 -3 mm 3 is needed for scale-equivalence to that currently achieved in clinical CT scanners (˜1 mm 3) in adult humans. These "mini-CT" images generally require minutes rather than seconds to complete a scan. The radiation exposure resulting from these mini-CT scans, while higher than clinical CT scans, is below the level resulting in acute tissue damage. Hence, these scans are useful for performing clinical-type diagnostic and monitoring scans for animal models of disease and their response to treatment. "Micro-CT", with voxel size pathological accumulations of metals such as Fe and Ca, which occur in the arterial wall following hemorrhage or tissue damage. Micro-CT can also be used as a test bed for exploring the utility of several modes of X-ray image formation, such as the use of dual-energy X-ray subtraction, X-ray scatter, phase delay and refraction-based imaging for increasing the contrast amongst soft tissue components. With the recent commercial availability of high speed, multi-slice CT scanners which can be operated in dual-energy mode, some of these micro-CT scanner capabilities and insights are becoming implementable in those CT scanners. As a result, the potential diagnostic spectrum that can be addressed with those scanners is broadened considerably.

  11. Intrasubject correlation between static scan and distribution volume images for [{sup 11}C]flumazenil PET

    Energy Technology Data Exchange (ETDEWEB)

    Mishina, Masahiro [Nippon Medical School, Tokyo (Japan); Senda, Michio; Kimura, Yuichi [and others

    2000-06-01

    Accumulation of [{sup 11}C]flumazenil (FMZ) reflects central nervous system benzodiazepine receptor (BZR). We searched for the optimal time for a static PET scan with FMZ as semi-quantitative imaging of BZR distribution. In 10 normal subjects, a dynamic series of decay-corrected PET scans was performed for 60 minutes, and the arterial blood was sampled during the scan to measure radioactivity and labeled metabolites. We generated 13 kinds of ''static scan'' images from the dynamic scan in each subject, and analyzed the pixel correlation for these images versus distribution volume (DV) images. We also analyzed the time for the [{sup 11}C]FMZ in plasma and tissue to reach the equilibrium. The intra-subject pixel correlation demonstrated that the static scan'' images for the period centering around 30 minutes post-injection had the strongest linear correlation with the DV image. The ratio of radioactivity in the cortex to that in the plasma reached a peak at 40 minutes after injection. Considering the physical decay and patient burden, we conclude that the decay corrected static scan for [{sup 11}C]FMZ PET as semi-quantitative imaging of BZR distribution is to be optimally acquired from 20 to 40 minutes after injection. (author)

  12. Bone scan: Indium-WBC correlation in the diagnosis of osteomyelitis of the foot

    Energy Technology Data Exchange (ETDEWEB)

    Eisenberg, B.; Wrege, S.S.; Altman, M.I.; Moore, J.W. (Veterans Administration Medical Center, Albuquerque, NM (USA))

    1989-11-01

    A retrospective study was performed of 20 podiatric cases using technetium-99m methylene diphosphonate three-phase bone scans along with indium-111 oxine leukocyte scans, as needed, to determine the presence and extent of osteomyelitis of the foot. Using criteria developed at our institution, the authors attempt to provide a mechanism to make a reliable diagnosis for osteomyelitis that has been supported by surgical/pathologic confirmation of long-term clinical follow-up. The sensitivity, using bone scans alone, was 100%, and specificity was 47%. Correlating bone and indium-111 leukocyte scans yielded a sensitivity of 100% with a specificity raised to 81%. Indium-111 leukocyte scans were used in 40% of cases when a definitive diagnosis for osteomyelitis could not be made on the basis of the three-phase bone scan or clinical presentation alone. Indium-111 leukocyte scans were also helpful in delineating the extent of the disease process. The authors present a standard technique for a 5-hour delayed imaging in the three-phase bone scan, as well as marking the foot in the indium-111 leukocyte scan with three routine views obtained for each imaging procedure, to ensure clinical accuracy.

  13. Radionuclide scanning after total knee replacement: correlation with pain and radiolucent lines. A prospective study

    DEFF Research Database (Denmark)

    Duus, B R; Boeckstyns, M; Kjaer, L

    1987-01-01

    The authors examined the relationships among Tc-99m radionuclide bone scan findings, pain, and radiolucent lines in 35 postsurgical knees. Our prospective study included bone scans, as well as radiographic and clinical examination three, seven, and 12 months after knee replacement surgery in 35...... and nonpainful knees, and the degree of isotope uptake did not correlate with the development of radiolucent lines around the prosthetic components....

  14. Nanoparticle flow velocimetry with image phase correlation for confocal laser scanning microscopy

    Science.gov (United States)

    Jun, Brian H.; Giarra, Matthew; Yang, Haisheng; Main, Russell; Vlachos, Pavlos P.

    2016-10-01

    We present a new particle image correlation technique for resolving nanoparticle flow velocity using confocal laser scanning microscopy (CLSM). The two primary issues that complicate nanoparticle scanning laser image correlation (SLIC)-based velocimetry are (1) the use of diffusion-dominated nanoparticles as flow tracers, which introduce a random decorrelating error into the velocity estimate, and (2) the effects of the scanning laser image acquisition, which introduces a bias error. To date, no study has quantified these errors or demonstrated a means to deal with them in SLIC velocimetry. In this work, we build upon the robust phase correlation (RPC) and existing methods of SLIC to quantify and mitigate these errors. First, we implement an ensemble RPC instead of using an ensemble standard cross-correlation, and develop a SLIC optimal filter that maximizes the correlation strength in order to reliably and accurately detect the correlation peak representing the most probable average displacement of the nanoparticles. Secondly, we developed an analytical model of the SLIC measurement bias error due to image scanning of diffusion-dominated tracer particles. We show that the bias error depends only on the ratio of the mean velocity of the tracer particles to that of the laser scanner and we use this model to correct the induced errors. We validated our technique using synthetic images and experimentally obtained SLIC images of nanoparticle flow through a micro-channel. Our technique reduced the error by up to a factor of ten compared to other SLIC algorithms for the images tested in this study. Moreover, our optimized RPC filter reduces the number of image pairs required for the convergence of the ensemble correlation by two orders of magnitude compared to the standard cross correlation. This feature has broader implications to ensemble correlation methods and should be further explored in depth in the future.

  15. Correlative analysis of immunoreactivity in confocal laser-scanning microscopy and scanning electron microscopy with focused ion beam milling.

    Science.gov (United States)

    Sonomura, Takahiro; Furuta, Takahiro; Nakatani, Ikuko; Yamamoto, Yo; Unzai, Tomo; Matsuda, Wakoto; Iwai, Haruki; Yamanaka, Atsushi; Uemura, Masanori; Kaneko, Takeshi

    2013-01-01

    Recently, three-dimensional reconstruction of ultrastructure of the brain has been realized with minimal effort by using scanning electron microscopy (SEM) combined with focused ion beam (FIB) milling (FIB-SEM). Application of immunohistochemical staining in electron microscopy (EM) provides a great advantage in that molecules of interest are specifically localized in ultrastructures. Thus, we applied immunocytochemistry for FIB-SEM and correlated this immunoreactivity with that in confocal laser-scanning microcopy (CF-LSM). Dendrites of medium-sized spiny neurons in the rat neostriatum were visualized using a recombinant viral vector, which labeled the infected neurons with membrane-targeted GFP in a Golgi stain-like fashion. Moreover, the thalamostriatal afferent terminals were immunolabeled with Cy5 fluorescence for vesicular glutamate transporter 2 (VGluT2). After detection of the sites of terminals apposed to the dendrites by using CF-LSM, GFP and VGluT2 immunoreactivities were further developed for EM by using immunogold/silver enhancement and immunoperoxidase/diaminobenzidine (DAB) methods, respectively. In contrast-inverted FIB-SEM images, silver precipitations and DAB deposits were observed as fine dark grains and diffuse dense profiles, respectively, indicating that these immunoreactivities were as easily recognizable as those in the transmission electron microscopy (TEM) images. Furthermore, in the sites of interest, some appositions displayed synaptic specializations of an asymmetric type. Thus, the present method was useful in the three-dimensional analysis of immunocytochemically differentiated synaptic connections in the central neural circuit.

  16. Correlative Analysis of Immunoreactivity in Confocal Laser-Scanning Microscopy and Scanning Electron Microscopy with Focused Ion Beam Milling

    Directory of Open Access Journals (Sweden)

    Takahiro eSonomura

    2013-02-01

    Full Text Available Three-dimensional reconstruction of ultrastructure of rat brain with minimal effort has recently been realized by scanning electron microscopy combined with focused ion beam milling (FIB-SEM. Because application of immunohistochemical staining to electron microscopy has a great advantage in that molecules of interest are specifically localized in ultrastructures, we here tried to apply immunocytochemistry to FIB-SEM and correlate immunoreactivity in confocal laser-scanning microcopy (CF-LSM with that in FIB-SEM. The dendrites of medium-sized spiny neurons in rat neostriatum were visualized with a recombinant viral vector, which labeled the infected neurons with membrane-targeted GFP in a Golgi stain-like fashion, and thalamostriatal afferent terminals were immunolabeled with Cy5 fluorescence for vesicular glutamate transporter 2 (VGluT2. After detecting the sites of terminals apposed to the dendrites in CF-LSM, GFP and VGluT2 immunoreactivities were further developed for electron microscopy by the immunogold/silver enhancement and immunoperoxidase/diaminobenzidine (DAB methods, respectively. In the contrast-inverted FIB-SEM images, silver precipitation and DAB deposits were observed as fine dark grains and diffuse dense profiles, respectively, indicating that these immunoreactivities were easily recognizable as in the images of transmission electron microscopy. In the sites of interest, some appositions were revealed to display synaptic specialization of asymmetric type. The present method is thus useful in the three-dimensional analysis of immunocytochemically differentiated synaptic connection in the central neural circuit.

  17. Technical Note: Cortical thickness and density estimation from clinical CT using a prior thickness-density relationship

    Energy Technology Data Exchange (ETDEWEB)

    Humbert, Ludovic, E-mail: ludohumberto@gmail.com [Galgo Medical, Barcelona 08036 (Spain); Hazrati Marangalou, Javad; Rietbergen, Bert van [Orthopaedic Biomechanics, Department of Biomedical Engineering, Eindhoven University of Technology, Eindhoven 5600 MB (Netherlands); Río Barquero, Luis Miguel del [CETIR Centre Medic, Barcelona 08029 (Spain); Lenthe, G. Harry van [Biomechanics Section, KU Leuven–University of Leuven, Leuven 3001 (Belgium)

    2016-04-15

    Purpose: Cortical thickness and density are critical components in determining the strength of bony structures. Computed tomography (CT) is one possible modality for analyzing the cortex in 3D. In this paper, a model-based approach for measuring the cortical bone thickness and density from clinical CT images is proposed. Methods: Density variations across the cortex were modeled as a function of the cortical thickness and density, location of the cortex, density of surrounding tissues, and imaging blur. High resolution micro-CT data of cadaver proximal femurs were analyzed to determine a relationship between cortical thickness and density. This thickness-density relationship was used as prior information to be incorporated in the model to obtain accurate measurements of cortical thickness and density from clinical CT volumes. The method was validated using micro-CT scans of 23 cadaver proximal femurs. Simulated clinical CT images with different voxel sizes were generated from the micro-CT data. Cortical thickness and density were estimated from the simulated images using the proposed method and compared with measurements obtained using the micro-CT images to evaluate the effect of voxel size on the accuracy of the method. Then, 19 of the 23 specimens were imaged using a clinical CT scanner. Cortical thickness and density were estimated from the clinical CT images using the proposed method and compared with the micro-CT measurements. Finally, a case-control study including 20 patients with osteoporosis and 20 age-matched controls with normal bone density was performed to evaluate the proposed method in a clinical context. Results: Cortical thickness (density) estimation errors were 0.07 ± 0.19 mm (−18 ± 92 mg/cm{sup 3}) using the simulated clinical CT volumes with the smallest voxel size (0.33 × 0.33 × 0.5 mm{sup 3}), and 0.10 ± 0.24 mm (−10 ± 115 mg/cm{sup 3}) using the volumes with the largest voxel size (1.0 × 1.0 × 3.0 mm{sup 3}). A trend for the

  18. Correlation between the Degree and Severity of Symptoms and CT scan Changes in Chronic Rhinosinusitis (CRS

    Directory of Open Access Journals (Sweden)

    H. Moghaddasi

    2008-01-01

    Full Text Available Background/Objective: find out whether any correlation exists between the degree and severity of symptoms as assessed by the SNOT-20 questionnaire and CT scan changes as graded by Lund-Mackay scoring system in chronic rhinosinusitis (CRS."nPatients and Methods: Fifties patients attending the otolaryngology department and diagnosed with CRS were prospectively entered in this study. All patients had their CT scans graded by using the Lund-Mackay  with the sino-nasal outcome questionnaire (SNOT-20. Correlation analysis was conducted to determine whether the CT scan stage as assigned by Lund Mackay staging system correlated with the SNOT-20 scores."nResults: The mean age of our patients was 32.4±8.5 and 32(64% of them were male and 18(36% were female. The mean SNOT-20 was 45±8.7 (29-67 and the mean Lund-Mackay sinus score was 18.5±5 (8- 24.The mean SNOT-20 score was higher for postnasal drip (PND and facial pain, and the lowest mean scores were for dizziness and ear pain. The Pearson's correlation coefficient confirmed that there was a good correlation between SNOT-20 scores and CT scores (Pearson correlation coefficient 0.77; P value, 0.0001."nConclusion: Patients with higher symptom scores are more likely to have CT imaging evidence of rhinosinusitis. In patients with isolated sleep or systematic symptoms, the likelihood of rhinosinusitis is less, even if symptoms are severe. Therefore, in these patients, sinus CT-scan should be considered before treatment to establish the diagnosis of chronic rhinosinusitis due to that a number of these patients may be doing not have rhinosinusitis.

  19. A correlative optical microscopy and scanning electron microscopy approach to locating nanoparticles in brain tumors.

    Science.gov (United States)

    Kempen, Paul J; Kircher, Moritz F; de la Zerda, Adam; Zavaleta, Cristina L; Jokerst, Jesse V; Mellinghoff, Ingo K; Gambhir, Sanjiv S; Sinclair, Robert

    2015-01-01

    The growing use of nanoparticles in biomedical applications, including cancer diagnosis and treatment, demands the capability to exactly locate them within complex biological systems. In this work a correlative optical and scanning electron microscopy technique was developed to locate and observe multi-modal gold core nanoparticle accumulation in brain tumor models. Entire brain sections from mice containing orthotopic brain tumors injected intravenously with nanoparticles were imaged using both optical microscopy to identify the brain tumor, and scanning electron microscopy to identify the individual nanoparticles. Gold-based nanoparticles were readily identified in the scanning electron microscope using backscattered electron imaging as bright spots against a darker background. This information was then correlated to determine the exact location of the nanoparticles within the brain tissue. The nanoparticles were located only in areas that contained tumor cells, and not in the surrounding healthy brain tissue. This correlative technique provides a powerful method to relate the macro- and micro-scale features visible in light microscopy with the nanoscale features resolvable in scanning electron microscopy.

  20. A STUDY OF CORRELATION BETWEEN NASAL ENDOSCOPY AND CT SCAN IN CASES OF CHRONIC RHINOSINUSITIS

    Directory of Open Access Journals (Sweden)

    Arun Kumar

    2015-07-01

    Full Text Available BACKGROUND: The accurate diagnosis of Chronic Rhinosinusitis (CRS is still a challenge therefore, the American Academy of Otorhinolaryngology - Head and Neck Surgery (AAO - HNS 1 has met in a multidisciplinary encounter and formulated a consensus based on only clinical symptoms. The computed tomography (CT scan and the nasal endoscopy (NE were introduced to make an accurate diagnosis of CRS and verify the disease severity. AIM: The aim of this study is to make a correlation between nasal endoscopy and CT scan in cases of clinically diagnosed Chronic Rhinosinusitis patients. METHOD: A study was carried out on 90 patients at Jhalawar Medical College, Jhalawar (Raj. during Sept. 20 12 to Dec. 2014. Diagnostic Nasal Endoscopy and CT Scan PNS done in patients, suffering from Chronic Rhinosinusitis. As a classification instruments, Metson / Gliklich's classification was used to evaluate the tomographic diagnosis and the Stankiewicz / Chow' s classification to evaluate the endoscopic diagnosis of Chronic Rhinosinusitis. RESULTS: Our study showed high specificity of endoscopy in comparison to CT scan though CT scan results are more sensitive. CONCLUSION: Endoscopy can confirm a Chronic Rhinosi nusitis diagnosis, but cannot rule it out, and that CT should be performed in cases of suspected CRS even if mucopurulence is not noted on endoscopy. The CT scan and the nasal endoscopy making easier the treatment planning and the disease resolution.

  1. Bone and gallium scan findings in malignant fibrous histiocytoma. Case report with radiographic and pathologic correlation

    Energy Technology Data Exchange (ETDEWEB)

    Mackey, J.K.; Alexieva-Jackson, B.; Fetters, D.V.; Edwards, S.M.; McBride, J.P.; Cole, R.L.; Trapp, W.G.

    1987-01-01

    Malignant fibrous histiocytoma (MFH) is the most common soft tissue malignancy in adults. The Ga-67 citrate scan findings of an extremity-located MFH, the most common location of this neoplasm, have never been published in English language journals to the best of the authors' knowledge. Ga-67 citrate and Tc-99m MDP scans of the thigh mass accurately depicted the tumor's local extent, including the presence of central ischemic necrosis within the tumor, and the absence of adjacent osseous involvement and distant metastases, as correlated with computed tomography, angiography, and pathologic examinations.

  2. Two-dimensional confocal laser scanning microscopy image correlation for nanoparticle flow velocimetry

    Science.gov (United States)

    Jun, Brian; Giarra, Matthew; Golz, Brian; Main, Russell; Vlachos, Pavlos

    2016-11-01

    We present a methodology to mitigate the major sources of error associated with two-dimensional confocal laser scanning microscopy (CLSM) images of nanoparticles flowing through a microfluidic channel. The correlation-based velocity measurements from CLSM images are subject to random error due to the Brownian motion of nanometer-sized tracer particles, and a bias error due to the formation of images by raster scanning. Here, we develop a novel ensemble phase correlation with dynamic optimal filter that maximizes the correlation strength, which diminishes the random error. In addition, we introduce an analytical model of CLSM measurement bias error correction due to two-dimensional image scanning of tracer particles. We tested our technique using both synthetic and experimental images of nanoparticles flowing through a microfluidic channel. We observed that our technique reduced the error by up to a factor of ten compared to ensemble standard cross correlation (SCC) for the images tested in the present work. Subsequently, we will assess our framework further, by interrogating nanoscale flow in the cell culture environment (transport within the lacunar-canalicular system) to demonstrate our ability to accurately resolve flow measurements in a biological system.

  3. Correlations between psychometric schizotypy, scan path length, fixations on the eyes and face recognition.

    Science.gov (United States)

    Hills, Peter J; Eaton, Elizabeth; Pake, J Michael

    2016-01-01

    Psychometric schizotypy in the general population correlates negatively with face recognition accuracy, potentially due to deficits in inhibition, social withdrawal, or eye-movement abnormalities. We report an eye-tracking face recognition study in which participants were required to match one of two faces (target and distractor) to a cue face presented immediately before. All faces could be presented with or without paraphernalia (e.g., hats, glasses, facial hair). Results showed that paraphernalia distracted participants, and that the most distracting condition was when the cue and the distractor face had paraphernalia but the target face did not, while there was no correlation between distractibility and participants' scores on the Schizotypal Personality Questionnaire (SPQ). Schizotypy was negatively correlated with proportion of time fixating on the eyes and positively correlated with not fixating on a feature. It was negatively correlated with scan path length and this variable correlated with face recognition accuracy. These results are interpreted as schizotypal traits being associated with a restricted scan path leading to face recognition deficits.

  4. Effects of ray profile modeling on resolution recovery in clinical CT

    Energy Technology Data Exchange (ETDEWEB)

    Hofmann, Christian [Institute of Medical Physics, Friedrich–Alexander University (FAU), Erlangen, Bavaria 91052 (Germany); Knaup, Michael [Medical Physics in Radiology, German Cancer Research Center (DKFZ), Heidelberg 69120 (Germany); Kachelrieß, Marc, E-mail: marc.kachelriess@dkfz-heidelberg.de [Medical Physics in Radiology, German Cancer Research Center (DKFZ), Heidelberg 69120, Germany and Institute of Medical Physics, Friedrich–Alexander University (FAU), Erlangen, Bavaria 91052 (Germany)

    2014-02-15

    be able to focus on comparing spatial resolution. The authors use two different simulation settings. Both are based on the geometry of a typical clinical CT system (0.7 mm detector element size at isocenter, 1024 projections per rotation). Setting one has an exaggerated source width of 5.0 mm. Setting two has a realistically small source width of 0.5 mm. The authors also investigate the transition from setting one to two. To quantify image quality, the authors analyze line profiles through the resolution patterns to define a contrast factor (CF) for contrast-resolution plots, and the authors compare the normalized cross-correlation (NCC) with respect to the ground truth of the circular resolution patterns. To independently analyze whether RM is of advantage, the authors implemented several iterative reconstruction algorithms: The statistical iterative reconstruction algorithm OSC, the ordered subsets simultaneous algebraic reconstruction technique (OSSART) and another statistical iterative reconstruction algorithm, denoted with ordered subsets maximum likelihood (OSML) algorithm. All algorithms were implemented both without RM (denoted as OSC, OSSART, and OSML) and with RM (denoted as OSC-RM, OSSART-RM, and OSML-RM). Results: For the unrealistic case of a 5.0 mm focal spot the CF can be improved by a factor of two due to RM: the 4.2 LP/cm bar pattern, which is the first bar pattern that cannot be resolved without RM, can be easily resolved with RM. For the realistic case of a 0.5 mm focus, all results show approximately the same CF. The NCC shows no significant dependency on RM when the source width is smaller than 2.0 mm (as in clinical CT). From 2.0 mm to 5.0 mm focal spot size increasing improvements can be observed with RM. Conclusions: Geometric RM in iterative reconstruction helps improving spatial resolution, if the ray cross-section is significantly larger than the ray sampling distance. In clinical CT, however, the ray is not much thicker than the distance

  5. Enhanced sympathetic arousal in response to FMRI scanning correlates with task induced activations and deactivations.

    Directory of Open Access Journals (Sweden)

    Markus Muehlhan

    Full Text Available It has been repeatedly shown that functional magnetic resonance imaging (fMRI triggers distress and neuroendocrine response systems. Prior studies have revealed that sympathetic arousal increases, particularly at the beginning of the examination. Against this background it appears likely that those stress reactions during the scanning procedure may influence task performance and neural correlates. However, the question how sympathetic arousal elicited by the scanning procedure itself may act as a potential confounder of fMRI data remains unresolved today. Thirty-seven scanner naive healthy subjects performed a simple cued target detection task. Levels of salivary alpha amylase (sAA, as a biomarker for sympathetic activity, were assessed in samples obtained at several time points during the lab visit. SAA increased two times, immediately prior to scanning and at the end of the scanning procedure. Neural activation related to motor preparation and timing as well as task performance was positively correlated with the first increase. Furthermore, the first sAA increase was associated with task induced deactivation (TID in frontal and parietal regions. However, these effects were restricted to the first part of the experiment. Consequently, this bias of scanner related sympathetic activation should be considered in future fMRI investigations. It is of particular importance for pharmacological investigations studying adrenergic agents and the comparison of groups with different stress vulnerabilities like patients and controls or adolescents and adults.

  6. Z-scan fluorescence correlation spectroscopy as a tool for diffusion measurements in planar lipid membranes.

    Science.gov (United States)

    Steinberger, Tomáš; Macháň, Radek; Hof, Martin

    2014-01-01

    Studies of lateral diffusion are used for the characterization of the dynamics of biological membranes. One of the techniques that can be used for this purpose is fluorescence correlation spectroscopy (FCS), which belongs to the single-molecule techniques. Unfortunately, FCS measurements, when performed in planar lipid systems, are associated with a few sources of inaccuracy in the determination of the lateral diffusion coefficient. The main problems are related to the imperfect positioning of the laser focus relative to the plane of the sample. Another source of inaccuracy is the requirement for external calibration of the detection volume size. This protocol introduces a calibration-free method called Z-scan fluorescence correlation spectroscopy (Z-scan FCS), which is based on the determination of the diffusion time and particle number in steps along the optical (z-) axis by sequential FCS measurements. Z-scan FCS could be employed for diffusion measurements in planar membrane model systems-supported phospholipid bilayers (SPBs) and giant unilamellar vesicles (GUVs) and also in biological membranes. A result from measurements in SPBs is also presented in the protocol as a principle example of the Z-scan technique.

  7. Scanning cross-correlator for monitoring uniform 3D ellipsoidal laser beams

    CERN Document Server

    Zelenogorskii, V V; Gacheva, E I; Gelikonov, G V; Krasilnikov, M; Mart'yanov, M A; Mironov, S Yu; Potemkin, A K; Syresin, E M; Stephan, F; Khazanov, E A

    2014-01-01

    The specific features of experimental implementation of a cross-correlator with a scan rate above 1600 cm s(-1) and a spatial delay amplitude of more than 15 mm are considered. The possibility of measuring the width of femtosecond pulses propagating in a train 300 mu s in duration with a repetition rate of 1 MHz is demonstrated. A time resolution of 300 fs for the maximum time window of 50 ps is attained.The cross-correlator is aimed at testing 3D pulses of a laser driver of an electron photo-injector.

  8. Energy scan of correlations in p+p and Be+Be from NA61/SHINE

    CERN Document Server

    Seryakov, Andrey

    2016-01-01

    The existence of the critical point (CP) of strongly interacting matter is still an open problem. An extensive strong interactions program including a search of the CP and the study of the onset of deconfinement was started by the NA61/SHINE experiment at the CERN SPS. A two dimensional scan of the phase diagram scan is performed to search for the CP and to shed light on the phase transition region. This program includes studies of hadron production in proton-proton, proton-nucleus and nucleus-nucleus interactions measured in a wide range of colliding energy and system size. Correlations between various observables measured at midrapidity as well as in separated rapidity intervals are considered as additional and sensitive tools of this phase diagram scan. We present NA61/SHINE results of studies of energy dependence of two-particle correlations of pseudo-rapidity and azimuthal angle in p+p collisions at the SPS and the first results on correlations between multiplicity and mean transverse momentum in 7Be+9Be...

  9. Correlation of live-cell imaging with volume scanning electron microscopy.

    Science.gov (United States)

    Lucas, Miriam S; Günthert, Maja; Bittermann, Anne Greet; de Marco, Alex; Wepf, Roger

    2017-01-01

    Live-cell imaging is one of the most widely applied methods in live science. Here we describe two setups for live-cell imaging, which can easily be combined with volume SEM for correlative studies. The first procedure applies cell culture dishes with a gridded glass support, which can be used for any light microscopy modality. The second approach is a flow-chamber setup based on Ibidi μ-slides. Both live-cell imaging strategies can be followed up with serial blockface- or focused ion beam-scanning electron microscopy. Two types of resin embedding after heavy metal staining and dehydration are presented making best use of the particular advantages of each imaging modality: classical en-bloc embedding and thin-layer plastification. The latter can be used only for focused ion beam-scanning electron microscopy, but is advantageous for studying cell-interactions with specific substrates, or when the substrate cannot be removed. En-bloc embedding has diverse applications and can be applied for both described volume scanning electron microscopy techniques. Finally, strategies for relocating the cell of interest are discussed for both embedding approaches and in respect to the applied light and scanning electron microscopy methods. Copyright © 2017 Elsevier Inc. All rights reserved.

  10. Multidimensional J-driven NMR correlations by single-scan offset-encoded recoupling

    Science.gov (United States)

    Lin, Yulan; Lupulescu, Adonis; Frydman, Lucio

    2016-04-01

    Two-dimensional (2D) correlations between bonded heteroatoms, lie at the cornerstone of many uses given to contemporary nuclear magnetic resonance (NMR). Improving the efficiency with which these correlations are established is an important topic in modern NMR, with potential applications in rapid chemical analysis and dynamic biophysical studies. Alternatives have been developed over the last decade to speed up these experiments, based among others on reducing the number of data points that need to be sampled, and/or shortening the inter-scan delays. Approaches have also been proposed to forfeit multi-scan schemes altogether, and complete full 2D correlations in a single shot. Here we explore and discuss a new alternative enabling the collection of such very fast - in principle, single-scan - acquisitions of 2D heteronuclear correlations among bonded species, which operates on the basis of a partial reintroduction of J couplings. Similar approaches had been proposed in the past based on collecting coupled spectra for arrays of off-resonance decoupling values; the proposal that is here introduced operates on the basis of suitably incorporating frequency-swept pulses, into spin-echo sequences. Thanks to the offset-dependent amplitude modulations of the in- and anti-phase components that such sequences impart, chemical shifts of coupled but otherwise unobserved nuclear species, can be extracted from the relative intensities and phases of J-coupled multiplets observed in one-dimensional acquisitions. A description of the steps needed to implement this rapid acquisition approach in a quantitative fashion, as well as applications of the ensuing sequences, are presented.

  11. Continuously scanning time-correlated single-photon-counting single-pixel 3-D lidar

    Science.gov (United States)

    Henriksson, Markus; Larsson, Håkan; Grönwall, Christina; Tolt, Gustav

    2017-03-01

    Time-correlated single-photon-counting (TCSPC) lidar provides very high resolution range measurements. This makes the technology interesting for three-dimensional imaging of complex scenes with targets behind foliage or other obscurations. TCSPC is a statistical method that demands integration of multiple measurements toward the same area to resolve objects at different distances within the instantaneous field-of-view. Point-by-point scanning will demand significant overhead for the movement, increasing the measurement time. Here, the effect of continuously scanning the scene row-by-row is investigated and signal processing methods to transform this into low-noise point clouds are described. The methods are illustrated using measurements of a characterization target and an oak and hazel copse. Steps between different surfaces of less than 5 cm in range are resolved as two surfaces.

  12. Independent measurement of femoral cortical thickness and cortical bone density using clinical CT.

    Science.gov (United States)

    Treece, G M; Gee, A H

    2015-02-01

    The local structure of the proximal femoral cortex is of interest since both fracture risk, and the effects of various interventions aimed at reducing that risk, are associated with cortical properties focused in particular regions rather than dispersed over the whole bone. Much of the femoral cortex is less than 3mm thick, appearing so blurred in clinical CT that its actual density is not apparent in the data, and neither thresholding nor full-width half-maximum techniques are capable of determining its width. Our previous work on cortical bone mapping showed how to produce more accurate estimates of cortical thickness by assuming a fixed value of the cortical density for each hip. However, although cortical density varies much less over the proximal femur than thickness, what little variation there is leads to errors in thickness measurement. In this paper, we develop the cortical bone mapping technique by exploiting local estimates of imaging blur to correct the global density estimate, thus providing a local density estimate as well as more accurate estimates of thickness. We also consider measurement of cortical mass surface density and the density of trabecular bone immediately adjacent to the cortex. Performance is assessed with ex vivo clinical QCT scans of proximal femurs, with true values derived from high resolution HRpQCT scans of the same bones. We demonstrate superior estimation of thickness than is possible with alternative techniques (accuracy 0.12 ± 0.39 mm for cortices in the range 1-3mm), and that local cortical density estimation is feasible for densities >800 mg/cm(3).

  13. Correlative In Vivo 2 Photon and Focused Ion Beam Scanning Electron Microscopy of Cortical Neurons

    Science.gov (United States)

    Maco, Bohumil; Holtmaat, Anthony; Cantoni, Marco; Kreshuk, Anna; Straehle, Christoph N.; Hamprecht, Fred A.; Knott, Graham W.

    2013-01-01

    Correlating in vivo imaging of neurons and their synaptic connections with electron microscopy combines dynamic and ultrastructural information. Here we describe a semi-automated technique whereby volumes of brain tissue containing axons and dendrites, previously studied in vivo, are subsequently imaged in three dimensions with focused ion beam scanning electron microcopy. These neurites are then identified and reconstructed automatically from the image series using the latest segmentation algorithms. The fast and reliable imaging and reconstruction technique avoids any specific labeling to identify the features of interest in the electron microscope, and optimises their preservation and staining for 3D analysis. PMID:23468982

  14. Correlative in vivo 2 photon and focused ion beam scanning electron microscopy of cortical neurons.

    Directory of Open Access Journals (Sweden)

    Bohumil Maco

    Full Text Available Correlating in vivo imaging of neurons and their synaptic connections with electron microscopy combines dynamic and ultrastructural information. Here we describe a semi-automated technique whereby volumes of brain tissue containing axons and dendrites, previously studied in vivo, are subsequently imaged in three dimensions with focused ion beam scanning electron microcopy. These neurites are then identified and reconstructed automatically from the image series using the latest segmentation algorithms. The fast and reliable imaging and reconstruction technique avoids any specific labeling to identify the features of interest in the electron microscope, and optimises their preservation and staining for 3D analysis.

  15. Correlations between Nimbus-7 Scanning Multichannel Microwave Radiometer data and an antecedent precipitation index

    Science.gov (United States)

    Wilke, G. D.; Mcfarland, M. J.

    1986-01-01

    Passive microwave brightness temperatures from the Nimbus-7 Scanning Multichannel Microwave Radiometer (SMMR) can be used to infer the soil moisture content over agricultural areas such as the southern Great Plains of the United States. A linear regression analysis between three transforms of the five dual polarized SMMR wavelengths of 0.81, 1.36, 1.66, 2.80 and 4.54 cm and an antecedent precipitation index representing the precipitation history showed correlation coefficients greater than 0.90 for pixel aggregates of 25-50 km. The use of surface air temperatures to approximate the temperature of the emitting layer was not required to obtain high correlation coefficients between the transforms and the antecedent precipitation index.

  16. Mapping Liquid-liquid protein phase separation using ultra-fast-scanning fluorescence correlation spectroscopy

    Science.gov (United States)

    Wei, Ming-Tzo; Elbaum-Garfinkle, Shana; Arnold, Craig B.; Priestley, Rodney D.; Brangwynne, Clifford P.

    Intrinsically disordered proteins (IDPs) are an understudied class of proteins that play important roles in a wide variety of biological processes in cells. We've previously shown that the C. elegans IDP LAF-1 phase separates into P granule-like droplets in vitro. However, the physics of the condensed phase remains poorly understood. Here, we use a novel technique, ultra-fast-scanning fluorescence correlation spectroscopy, to study the nano-scale rheological properties of LAF-1 droplets. Ultra-fast-scanning FCS uses a tunable acoustic gradient index of refraction (TAG) lens with an oil immersion objective to control axial movement of the focal point over a length of several micrometers at frequencies of 70kHz. Using ultra-fast-scanning FCS allows for the accurate determination of molecular concentrations and their diffusion coefficient, when the particle is passing through an excitation volume. Our work reveals an asymmetric LAF-1 phase diagram, and demonstrates that LAF-1 droplets are purely viscous phases which are highly tunable by salt concentration.

  17. High-resolution imaging by scanning electron microscopy of semithin sections in correlation with light microscopy.

    Science.gov (United States)

    Koga, Daisuke; Kusumi, Satoshi; Shodo, Ryusuke; Dan, Yukari; Ushiki, Tatsuo

    2015-12-01

    In this study, we introduce scanning electron microscopy (SEM) of semithin resin sections. In this technique, semithin sections were adhered on glass slides, stained with both uranyl acetate and lead citrate, and observed with a backscattered electron detector at a low accelerating voltage. As the specimens are stained in the same manner as conventional transmission electron microscopy (TEM), the contrast of SEM images of semithin sections was similar to TEM images of ultrathin sections. Using this technique, wide areas of semithin sections were also observed by SEM, without the obstruction of grids, which was inevitable for traditional TEM. This study also applied semithin section SEM to correlative light and electron microscopy. Correlative immunofluorescence microscopy and immune-SEM were performed in semithin sections of LR white resin-embedded specimens using a FluoroNanogold-labeled secondary antibody. Because LR white resin is hydrophilic and electron stable, this resin is suitable for immunostaining and SEM observation. Using correlative microscopy, the precise localization of the primary antibody was demonstrated by fluorescence microscopy and SEM. This method has great potential for studies examining the precise localization of molecules, including Golgi- and ER-associated proteins, in correlation with LM and SEM.

  18. Improving the clinical correlation of multiple sclerosis black hole volume change by paired-scan analysis.

    Science.gov (United States)

    Tam, Roger C; Traboulsee, Anthony; Riddehough, Andrew; Li, David K B

    2012-01-01

    The change in T 1-hypointense lesion ("black hole") volume is an important marker of pathological progression in multiple sclerosis (MS). Black hole boundaries often have low contrast and are difficult to determine accurately and most (semi-)automated segmentation methods first compute the T 2-hyperintense lesions, which are a superset of the black holes and are typically more distinct, to form a search space for the T 1w lesions. Two main potential sources of measurement noise in longitudinal black hole volume computation are partial volume and variability in the T 2w lesion segmentation. A paired analysis approach is proposed herein that uses registration to equalize partial volume and lesion mask processing to combine T 2w lesion segmentations across time. The scans of 247 MS patients are used to compare a selected black hole computation method with an enhanced version incorporating paired analysis, using rank correlation to a clinical variable (MS functional composite) as the primary outcome measure. The comparison is done at nine different levels of intensity as a previous study suggests that darker black holes may yield stronger correlations. The results demonstrate that paired analysis can strongly improve longitudinal correlation (from -0.148 to -0.303 in this sample) and may produce segmentations that are more sensitive to clinically relevant changes.

  19. Multi-resolution correlative focused ion beam scanning electron microscopy: applications to cell biology.

    Science.gov (United States)

    Narayan, Kedar; Danielson, Cindy M; Lagarec, Ken; Lowekamp, Bradley C; Coffman, Phil; Laquerre, Alexandre; Phaneuf, Michael W; Hope, Thomas J; Subramaniam, Sriram

    2014-03-01

    Efficient correlative imaging of small targets within large fields is a central problem in cell biology. Here, we demonstrate a series of technical advances in focused ion beam scanning electron microscopy (FIB-SEM) to address this issue. We report increases in the speed, robustness and automation of the process, and achieve consistent z slice thickness of ∼3 nm. We introduce "keyframe imaging" as a new approach to simultaneously image large fields of view and obtain high-resolution 3D images of targeted sub-volumes. We demonstrate application of these advances to image post-fusion cytoplasmic intermediates of the HIV core. Using fluorescently labeled cell membranes, proteins and HIV cores, we first produce a "target map" of an HIV infected cell by fluorescence microscopy. We then generate a correlated 3D EM volume of the entire cell as well as high-resolution 3D images of individual HIV cores, achieving correlative imaging across a volume scale of 10(9) in a single automated experimental run.

  20. Correlation of intra-articular osseous measurements with posterior cruciate ligament length on MRI scans.

    LENUS (Irish Health Repository)

    Orakzai, S H

    2010-01-01

    Six patients with a clinical diagnosis of chronic posterior cruciate ligament (PCL) rupture, based on a positive posterior drawer test, had a normal appearance of the PCL on an MRI scan. It is postulated that the PCL had been ruptured but healed in a lengthened state. 12 volunteers with no history of knee trauma underwent an MRI scan of the knee. In this control group (n = 12), there was a close correlation between the lateral femoral condylar width in the sagittal plane and the PCL length, with a ratio of 2:1 (95% confidence interval (CI) = 1.817-2.095). In the clinically abnormal group (n = 6), the ratio was 1.49:1 (95% CI = 1.206-1.782) (p< 0.0005). In conclusion, the ratio of the lateral femoral condylar width in the sagittal plane to the PCL length is a useful index for diagnosing PCL attenuation and lengthening in the presence of a normal morphological MR appearance.

  1. arXiv Two particle correlations from the energy scan with p+p interactions

    CERN Document Server

    Maksiak, Bartosz

    2015-05-12

    The NA61/Shine experiment aims to discover the critical point of strongly interacting matter and study the properties of the onset of deconfinement. These goals are to be achieved by performing a two dimensional phase diagram T-mu_B scan by measurements of hadron production properties in proton-proton, proton-nucleus and nucleus-nucleus interactions as a function of collision energy and system size. Close to the phase transition and/or close to the critical point large fluctuations are predicted. In this contribution preliminary results on two-particle correlations in pseudorapidity and azimuthal angle will be presented for p+p interactions at beam momenta: 20, 31, 40, 80 and 158 GeV/c. The NA61/Shine results will be compared with the corresponding data of other experiments and model predictions. A striking evolution with collision energy is observed.

  2. 3D correlative light and electron microscopy of cultured cells using serial blockface scanning electron microscopy

    Science.gov (United States)

    Lerner, Thomas R.; Burden, Jemima J.; Nkwe, David O.; Pelchen-Matthews, Annegret; Domart, Marie-Charlotte; Durgan, Joanne; Weston, Anne; Jones, Martin L.; Peddie, Christopher J.; Carzaniga, Raffaella; Florey, Oliver; Marsh, Mark; Gutierrez, Maximiliano G.

    2017-01-01

    ABSTRACT The processes of life take place in multiple dimensions, but imaging these processes in even three dimensions is challenging. Here, we describe a workflow for 3D correlative light and electron microscopy (CLEM) of cell monolayers using fluorescence microscopy to identify and follow biological events, combined with serial blockface scanning electron microscopy to analyse the underlying ultrastructure. The workflow encompasses all steps from cell culture to sample processing, imaging strategy, and 3D image processing and analysis. We demonstrate successful application of the workflow to three studies, each aiming to better understand complex and dynamic biological processes, including bacterial and viral infections of cultured cells and formation of entotic cell-in-cell structures commonly observed in tumours. Our workflow revealed new insight into the replicative niche of Mycobacterium tuberculosis in primary human lymphatic endothelial cells, HIV-1 in human monocyte-derived macrophages, and the composition of the entotic vacuole. The broad application of this 3D CLEM technique will make it a useful addition to the correlative imaging toolbox for biomedical research. PMID:27445312

  3. 3D correlative light and electron microscopy of cultured cells using serial blockface scanning electron microscopy.

    Science.gov (United States)

    Russell, Matthew R G; Lerner, Thomas R; Burden, Jemima J; Nkwe, David O; Pelchen-Matthews, Annegret; Domart, Marie-Charlotte; Durgan, Joanne; Weston, Anne; Jones, Martin L; Peddie, Christopher J; Carzaniga, Raffaella; Florey, Oliver; Marsh, Mark; Gutierrez, Maximiliano G; Collinson, Lucy M

    2017-01-01

    The processes of life take place in multiple dimensions, but imaging these processes in even three dimensions is challenging. Here, we describe a workflow for 3D correlative light and electron microscopy (CLEM) of cell monolayers using fluorescence microscopy to identify and follow biological events, combined with serial blockface scanning electron microscopy to analyse the underlying ultrastructure. The workflow encompasses all steps from cell culture to sample processing, imaging strategy, and 3D image processing and analysis. We demonstrate successful application of the workflow to three studies, each aiming to better understand complex and dynamic biological processes, including bacterial and viral infections of cultured cells and formation of entotic cell-in-cell structures commonly observed in tumours. Our workflow revealed new insight into the replicative niche of Mycobacterium tuberculosis in primary human lymphatic endothelial cells, HIV-1 in human monocyte-derived macrophages, and the composition of the entotic vacuole. The broad application of this 3D CLEM technique will make it a useful addition to the correlative imaging toolbox for biomedical research. © 2017. Published by The Company of Biologists Ltd.

  4. Practical considerations for noise power spectra estimation for clinical CT scanners.

    Science.gov (United States)

    Dolly, Steven; Chen, Hsin-Chen; Anastasio, Mark; Mutic, Sasa; Li, Hua

    2016-05-08

    Local noise power spectra (NPS) have been commonly calculated to represent the noise properties of CT imaging systems, but their properties are significantly affected by the utilized calculation schemes. In this study, the effects of varied calculation parameters on the local NPS were analyzed, and practical suggestions were provided regarding the estimation of local NPS for clinical CT scanners. The uniformity module of a Catphan phantom was scanned with a Philips Brilliance 64 slice CT simulator with varied scanning protocols. Images were reconstructed using FBP and iDose4 iterative reconstruction with noise reduction levels 1, 3, and 6. Local NPS were calculated and compared for varied region of interest (ROI) locations and sizes, image background removal methods, and window functions. Additionally, with a predetermined NPS as a ground truth, local NPS calculation accuracy was compared for computer simulated ROIs, varying the aforementioned parameters in addition to ROI number. An analysis of the effects of these varied calculation parameters on the magnitude and shape of the NPS was conducted. The local NPS varied depending on calculation parameters, particularly at low spatial frequencies below ~ 0.15 mm-1. For the simulation study, NPS calculation error decreased exponentially as ROI number increased. For the Catphan study the NPS magnitude varied as a function of ROI location, which was better observed when using smaller ROI sizes. The image subtraction method for background removal was the most effective at reducing low-frequency background noise, and produced similar results no matter which ROI size or window function was used. The PCA background removal method with a Hann window function produced the closest match to image subtraction, with an average percent difference of 17.5%. Image noise should be analyzed locally by calculating the NPS for small ROI sizes. A minimum ROI size is recommended based on the chosen radial bin size and image pixel

  5. Intra- and Interobserver Variability of Cochlear Length Measurements in Clinical CT.

    Science.gov (United States)

    Iyaniwura, John E; Elfarnawany, Mai; Riyahi-Alam, Sadegh; Sharma, Manas; Kassam, Zahra; Bureau, Yves; Parnes, Lorne S; Ladak, Hanif M; Agrawal, Sumit K

    2017-07-01

    The cochlear A-value measurement exhibits significant inter- and intraobserver variability, and its accuracy is dependent on the visualization method in clinical computed tomography (CT) images of the cochlea. An accurate estimate of the cochlear duct length (CDL) can be used to determine electrode choice, and frequency map the cochlea based on the Greenwood equation. Studies have described estimating the CDL using a single A-value measurement, however the observer variability has not been assessed. Clinical and micro-CT images of 20 cadaveric cochleae were acquired. Four specialists measured A-values on clinical CT images using both standard views and multiplanar reconstructed (MPR) views. Measurements were repeated to assess for intraobserver variability. Observer variabilities were evaluated using intra-class correlation and absolute differences. Accuracy was evaluated by comparison to the gold standard micro-CT images of the same specimens. Interobserver variability was good (average absolute difference: 0.77 ± 0.42 mm) using standard views and fair (average absolute difference: 0.90 ± 0.31 mm) using MPR views. Intraobserver variability had an average absolute difference of 0.31 ± 0.09 mm for the standard views and 0.38 ± 0.17 mm for the MPR views. MPR view measurements were more accurate than standard views, with average relative errors of 9.5 and 14.5%, respectively. There was significant observer variability in A-value measurements using both the standard and MPR views. Creating the MPR views increased variability between experts, however MPR views yielded more accurate results. Automated A-value measurement algorithms may help to reduce variability and increase accuracy in the future.

  6. Phospholipid diffusion coefficients of cushioned model membranes determined via z-scan fluorescence correlation spectroscopy.

    Science.gov (United States)

    Sterling, Sarah M; Allgeyer, Edward S; Fick, Jörg; Prudovsky, Igor; Mason, Michael D; Neivandt, David J

    2013-06-25

    Model cellular membranes enable the study of biological processes in a controlled environment and reduce the traditional challenges associated with live or fixed cell studies. However, model membrane systems based on the air/water or oil/solution interface do not allow for incorporation of transmembrane proteins or for the study of protein transport mechanisms. Conversely, a phospholipid bilayer deposited via the Langmuir-Blodgett/Langmuir-Schaefer method on a hydrogel layer is potentially an effective mimic of the cross section of a biological membrane and facilitates both protein incorporation and transport studies. Prior to application, however, such membranes must be fully characterized, particularly with respect to the phospholipid bilayer phase transition temperature. Here we present a detailed characterization of the phase transition temperature of the inner and outer leaflets of a chitosan supported model membrane system. Specifically, the lateral diffusion coefficient of each individual leaflet has been determined as a function of temperature. Measurements were performed utilizing z-scan fluorescence correlation spectroscopy (FCS), a technique that yields calibration-free diffusion information. Analysis via the method of Wawrezinieck and co-workers revealed that phospholipid diffusion changes from raftlike to free diffusion as the temperature is increased-an insight into the dynamic behavior of hydrogel supported membranes not previously reported.

  7. Correlation between auditory brainstem recordings and morphology as seen through the scanning electron microscope

    Energy Technology Data Exchange (ETDEWEB)

    Hultcrantz, M.

    1988-09-01

    Pregnant CBA/CBA mice were exposed to 0.5, 1 and 2 Grey (Gy), (1 Gy = 100 rad) in single doses with whole body gamma-irradiation on the 12th, 13th and 16th gestational days, respectively. The animals were tested at an age of one month for vestibular and cochlear function. Thereafter the inner ears were analyzed with scanning electron microscopy. A morphological analysis with cytocochleograms was performed. Morphological changes in the vestibular part showed gross malformations in the cristae ampullares. Hair cells of type I seemed to be more severely changed than hair cells type II. The macula utriculi also showed malformations of the otoconia. All these changes were more pronounced when the irradiation was given early during pregnancy and with the highest doses used, except the otoconia which were more injured when irradiated day 16 of gestation. No disturbances of the equilibrium reflexes were noted. In the cochlea a dose-dependent, time-related damage pattern was demonstrated with pathological changes of outer (OHC) and inner (IHC) hair cells. When tested electrophysiologically for auditory function with auditory brainstem recordings (ABR), elevated thresholds were revealed different in shape depending on when during pregnancy irradiation took place. A good correlation existed between the morphological changes as seen in the cytocochleograms and the functional changes documented with the ABR.

  8. Correlative scanning electron and confocal microscopy imaging of labeled cells coated by indium-tin-oxide

    KAUST Repository

    Rodighiero, Simona

    2015-03-22

    Confocal microscopy imaging of cells allows to visualize the presence of specific antigens by using fluorescent tags or fluorescent proteins, with resolution of few hundreds of nanometers, providing their localization in a large field-of-view and the understanding of their cellular function. Conversely, in scanning electron microscopy (SEM), the surface morphology of cells is imaged down to nanometer scale using secondary electrons. Combining both imaging techniques have brought to the correlative light and electron microscopy, contributing to investigate the existing relationships between biological surface structures and functions. Furthermore, in SEM, backscattered electrons (BSE) can image local compositional differences, like those due to nanosized gold particles labeling cellular surface antigens. To perform SEM imaging of cells, they could be grown on conducting substrates, but obtaining images of limited quality. Alternatively, they could be rendered electrically conductive, coating them with a thin metal layer. However, when BSE are collected to detect gold-labeled surface antigens, heavy metals cannot be used as coating material, as they would mask the BSE signal produced by the markers. Cell surface could be then coated with a thin layer of chromium, but this results in a loss of conductivity due to the fast chromium oxidation, if the samples come in contact with air. In order to overcome these major limitations, a thin layer of indium-tin-oxide was deposited by ion-sputtering on gold-decorated HeLa cells and neurons. Indium-tin-oxide was able to provide stable electrical conductivity and preservation of the BSE signal coming from the gold-conjugated markers. © 2015 Wiley Periodicals, Inc.

  9. Correlative scanning electron and confocal microscopy imaging of labeled cells coated by indium-tin-oxide.

    Science.gov (United States)

    Rodighiero, Simona; Torre, Bruno; Sogne, Elisa; Ruffilli, Roberta; Cagnoli, Cinzia; Francolini, Maura; Di Fabrizio, Enzo; Falqui, Andrea

    2015-06-01

    Confocal microscopy imaging of cells allows to visualize the presence of specific antigens by using fluorescent tags or fluorescent proteins, with resolution of few hundreds of nanometers, providing their localization in a large field-of-view and the understanding of their cellular function. Conversely, in scanning electron microscopy (SEM), the surface morphology of cells is imaged down to nanometer scale using secondary electrons. Combining both imaging techniques have brought to the correlative light and electron microscopy, contributing to investigate the existing relationships between biological surface structures and functions. Furthermore, in SEM, backscattered electrons (BSE) can image local compositional differences, like those due to nanosized gold particles labeling cellular surface antigens. To perform SEM imaging of cells, they could be grown on conducting substrates, but obtaining images of limited quality. Alternatively, they could be rendered electrically conductive, coating them with a thin metal layer. However, when BSE are collected to detect gold-labeled surface antigens, heavy metals cannot be used as coating material, as they would mask the BSE signal produced by the markers. Cell surface could be then coated with a thin layer of chromium, but this results in a loss of conductivity due to the fast chromium oxidation, if the samples come in contact with air. In order to overcome these major limitations, a thin layer of indium-tin-oxide was deposited by ion-sputtering on gold-decorated HeLa cells and neurons. Indium-tin-oxide was able to provide stable electrical conductivity and preservation of the BSE signal coming from the gold-conjugated markers.

  10. Advantages of indium-tin oxide-coated glass slides in correlative scanning electron microscopy applications of uncoated cultured cells.

    NARCIS (Netherlands)

    Pluk, H.; Stokes, D.J.; Lich, B.; Wieringa, B.; Fransen, J.A.M.

    2009-01-01

    A method of direct visualization by correlative scanning electron microscopy (SEM) and fluorescence light microscopy of cell structures of tissue cultured cells grown on conductive glass slides is described. We show that by growing cells on indium-tin oxide (ITO)-coated glass slides, secondary elect

  11. Bone and gallium scans in mastocytosis: correlation with count rates, radiography, and microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Ensslen, R.D. (Cross Cancer Inst., Edmonton, Alberta); Jackson, F.I.; Reid, A.M.

    1983-07-01

    Mastocytosis (urticaria pigmentosa) was proven in a patient suffering from severe back pain. A bone scan showed diffusely increased bone activity. Count rates were also abnormally elevated over several areas of the skeleton. Radiographs were consistent with mastocytosis in bone.

  12. Correlative Light and Scanning X-Ray Scattering Microscopy of Healthy and Pathologic Human Bone Sections

    OpenAIRE

    Giannini, C.; D. Siliqi; Bunk, O.; Beraudi, A.; Ladisa, M.; Altamura, D.; Stea, S.; Baruffaldi, F.

    2012-01-01

    Scanning small and wide angle X-ray scattering (scanning SWAXS) experiments were performed on healthy and pathologic human bone sections. Via crystallographic tools the data were transformed into quantitative images and as such compared with circularly polarized light (CPL) microscopy images. SWAXS and CPL images allowed extracting information of the mineral nanocrystalline phase embedded, with and without preferred orientation, in the collagen fibrils, mapping local changes at sub-osteon res...

  13. Structure-function correlations using scanning laser polarimetry in primary angle-closure glaucoma and primary open-angle glaucoma.

    Science.gov (United States)

    Lee, Pei-Jung; Liu, Catherine Jui-Ling; Wojciechowski, Robert; Bailey-Wilson, Joan E; Cheng, Ching-Yu

    2010-05-01

    To assess the correlations between retinal nerve fiber layer (RNFL) thickness measured with scanning laser polarimetry and visual field (VF) sensitivity in primary open-angle glaucoma (POAG) and primary angle-closure glaucoma (PACG). Prospective, comparative, observational cases series. Fifty patients with POAG and 56 patients with PACG were examined using scanning laser polarimetry with variable corneal compensation (GDx VCC; Laser Diagnostic Technologies, Inc.) and Humphrey VF analyzer (Carl Zeiss Meditec, Inc.) between August 2005 and July 2006 at Taipei Veterans General Hospital. Correlations between RNFL thickness and VF sensitivity, expressed as mean sensitivity in both decibel and 1/Lambert scales, were estimated by the Spearman rank correlation coefficient (r(s)) and multivariate median regression models (pseudo R(2)). The correlations were determined globally and for 6 RNFL sectors and their corresponding VF regions. The correlation between RNFL thickness and mean sensitivity (in decibels) was weaker in the PACG group (r(s) = 0.38; P = .004; pseudo R(2) = 0.17) than in the POAG group (r(s) = 0.51; P polarimetry. Compared with eyes with POAG, fewer RNFL sectors have significant structure-function correlations in eyes with PACG. Copyright 2010 Elsevier Inc. All rights reserved.

  14. Correlative Light and Scanning X-Ray Scattering Microscopy of Healthy and Pathologic Human Bone Sections

    Science.gov (United States)

    Giannini, C.; Siliqi, D.; Bunk, O.; Beraudi, A.; Ladisa, M.; Altamura, D.; Stea, S.; Baruffaldi, F.

    2012-01-01

    Scanning small and wide angle X-ray scattering (scanning SWAXS) experiments were performed on healthy and pathologic human bone sections. Via crystallographic tools the data were transformed into quantitative images and as such compared with circularly polarized light (CPL) microscopy images. SWAXS and CPL images allowed extracting information of the mineral nanocrystalline phase embedded, with and without preferred orientation, in the collagen fibrils, mapping local changes at sub-osteon resolution. This favorable combination has been applied for the first time to biopsies of dwarfism syndrome and Paget's disease to shed light onto the cortical structure of natural bone in healthy and pathologic sections. PMID:22666538

  15. Enhanced Sympathetic Arousal in Response to fMRI Scanning Correlates with Task Induced Activations and Deactivations

    Science.gov (United States)

    Muehlhan, Markus; Lueken, Ulrike; Siegert, Jens; Wittchen, Hans-Ulrich; Smolka, Michael N.; Kirschbaum, Clemens

    2013-01-01

    It has been repeatedly shown that functional magnetic resonance imaging (fMRI) triggers distress and neuroendocrine response systems. Prior studies have revealed that sympathetic arousal increases, particularly at the beginning of the examination. Against this background it appears likely that those stress reactions during the scanning procedure may influence task performance and neural correlates. However, the question how sympathetic arousal elicited by the scanning procedure itself may act as a potential confounder of fMRI data remains unresolved today. Thirty-seven scanner naive healthy subjects performed a simple cued target detection task. Levels of salivary alpha amylase (sAA), as a biomarker for sympathetic activity, were assessed in samples obtained at several time points during the lab visit. SAA increased two times, immediately prior to scanning and at the end of the scanning procedure. Neural activation related to motor preparation and timing as well as task performance was positively correlated with the first increase. Furthermore, the first sAA increase was associated with task induced deactivation (TID) in frontal and parietal regions. However, these effects were restricted to the first part of the experiment. Consequently, this bias of scanner related sympathetic activation should be considered in future fMRI investigations. It is of particular importance for pharmacological investigations studying adrenergic agents and the comparison of groups with different stress vulnerabilities like patients and controls or adolescents and adults. PMID:23967320

  16. Correlative scanning-transmission electron microscopy reveals that a chimeric flavivirus is released as individual particles in secretory vesicles.

    Science.gov (United States)

    Burlaud-Gaillard, Julien; Sellin, Caroline; Georgeault, Sonia; Uzbekov, Rustem; Lebos, Claude; Guillaume, Jean-Marc; Roingeard, Philippe

    2014-01-01

    The intracellular morphogenesis of flaviviruses has been well described, but flavivirus release from the host cell remains poorly documented. We took advantage of the optimized production of an attenuated chimeric yellow fever/dengue virus for vaccine purposes to study this phenomenon by microscopic approaches. Scanning electron microscopy (SEM) showed the release of numerous viral particles at the cell surface through a short-lived process. For transmission electron microscopy (TEM) studies of the intracellular ultrastructure of the small number of cells releasing viral particles at a given time, we developed a new correlative microscopy method: CSEMTEM (for correlative scanning electron microscopy - transmission electron microscopy). CSEMTEM analysis suggested that chimeric flavivirus particles were released as individual particles, in small exocytosis vesicles, via a regulated secretory pathway. Our morphological findings provide new insight into interactions between flaviviruses and cells and demonstrate that CSEMTEM is a useful new method, complementary to SEM observations of biological events by intracellular TEM investigations.

  17. A versatile dual spot laser scanning confocal microscopy system for advanced fluorescence correlation spectroscopy analysis in living cell

    CERN Document Server

    Ferrand, P; Kress, A; Aillaud, A; Rigneault, H; Marguet, D

    2009-01-01

    A fluorescence correlation spectroscopy (FCS) system based on two independent measurement volumes is presented. The optical setup and data acquisition hardware are detailed, as well as a complete protocol to control the location, size and shape of the measurement volumes. A method that allows to monitor independently the excitation and collection efficiency distribution is proposed. Finally, a few examples of measurements that exploit the two spots in static and/or scanning schemes, are reported.

  18. Calciphylaxis on bone scan: correlation between molecular and cross-sectional findings

    Directory of Open Access Journals (Sweden)

    Malak Itani, MD

    2017-03-01

    Full Text Available Calciphylaxis is a rare devastating medical condition commonly associated with end-stage renal disease and characterized by extensive microvascular calcifications. We describe a case of calciphylaxis presenting on Tc-99m MDP bone scan imaging with asymmetric radiotracer uptake within the lower extremities corresponding to extensive soft tissue calcifications on Computed tomography. Familiarity with the classic clinical presentation and imaging features of this rare entity may help its early identification and treatment.

  19. Prediction of non-identical particle correlations for the Beam Energy Scan program

    CERN Document Server

    Poniatowska, Katarzyna

    2014-01-01

    Femtoscopy of two non-identical particles in heavy ion collisions enables one to study the space-time asymmetry in the particle's emission process. Theoretical studies based on EPOS model performed for collision energies from the Beam Energy Scan program in STAR allow us to investigate the dependence of source sizes and dynamics effects. Obtained information will enable us to predict the collective behaviour of femtoscopic particle's source.

  20. A correlative light microscopic, transmission and scanning electron microscopic study of the dorsum of human tongue.

    Science.gov (United States)

    Boshell, J L; Wilborn, W H; Singh, B B

    1980-01-01

    The dorsum of the human tongue has three types of papillae, filiform, fungiform and circumvallate. Some investigators have studied these by light and transmission electron microscopy. Since knowledge of the morphology through studies by scanning of the morphology through studies by scanning electron microscopy (SEM) is scant, this investigation was started with the purpose of studying human tongues at different ages. One fetal tongue and portions of three tongues from newborns were removed. Additional specimens were biopsied from the anterior region of three adult tongues. Samples were processed routinely for light microscopy, transmission electron microscoy (TEM) and scanning electron microscopy (SEM). Two distinct features were evident on the fetal tongue. The first was that the surface epithelial layer of the tongue appeared to be periderm. The second was that fungiform papillae began their development earlier than filiform. At birth, the putative periderm had disappeared and a few filiform papillae were observed. On the adult tongue, filiform papillae were numerous and were comprised of two cell populations. One cell population contained numerous keratohyalin granules (KHG). The KHG were two types, eosinophilic and basophilic. Ultrastructurally, the eosinophilic granules were less electron dense and larger in size than the basophilic KHG.

  1. Interapophyseal joint synovial cyst of lumbar spine. CT scan and MR imaging correlation in two cases

    Energy Technology Data Exchange (ETDEWEB)

    Granat, O.; Jeanbourquin,D.; Perfettini, C.; Pernot, P.; Ducolombier, A.; Cosnard, G.

    1987-05-01

    Two patients presenting with L5 radiculagia were investigated by CT scan imaging. The origin of the pain was determined with certitude as arising from intraspinal development of an interapophyseal synovial cyst. Examination of the two cases by MR imaging provided conflicting results: in one patient images obtained by MR were not contributive and the synovial cyst would probably have been missed while in the other patient images were specific and very sensitive for diagnosis of interapophyseal synovial lesions. Treatment was surgical in both cases.

  2. Correlative fluorescence and scanning transmission electron microscopy of quantum dot-labeled proteins on whole cells in liquid.

    Science.gov (United States)

    Peckys, Diana B; Bandmann, Vera; de Jonge, Niels

    2014-01-01

    Correlative fluorescence microscopy combined with scanning transmission electron microscopy (STEM) of cells fully immersed in liquid is a new methodology with many application areas. Proteins, in live cells immobilized on microchips, are labeled with fluorescent quantum dot nanoparticles. In this protocol, the epidermal growth factor receptor (EGFR) is labeled. The cells are fixed after a selected labeling time, for example, 5 min as needed to form EGFR dimers. The microchip with cells is then imaged with fluorescence microscopy. Thereafter, STEM can be accomplished in two ways. The microchip with the labeled cells and one microchip with a spacer are assembled into a special microfluidic device and imaged with dedicated high-voltage STEM. Alternatively, thin edges of cells can be studied with environmental scanning electron microscopy with a STEM detector, by placing a microchip with cells in a cooled wet environment.

  3. Structure-Function Correlations using Scanning Laser Polarimetry in Primary Angle-Closure Glaucoma and Primary Open Angle Glaucoma

    Science.gov (United States)

    Lee, Pei-Jung; Liu, Catherine Jui-Ling.; Wojciechowski, Robert; Bailey-Wilson, Joan E.; Cheng, Ching-Yu

    2010-01-01

    Purpose To assess the correlations between retinal nerve fiber layer (RNFL) thickness measured with scanning laser polarimetry (SLP) and visual field (VF) sensitivity in primary open angle glaucoma (POAG) and primary angle-closure glaucoma (PACG). Design Prospective, comparative, observational cases series Methods Fifty patients with POAG and 56 with PACG were examined using SLP with variable corneal compensation (GDx VCC) and Humphrey VF analyzer between August 2005 and July 2006 at Taipei Veterans General Hospital. Correlations between RNFL thickness and VF sensitivity, expressed as mean sensitivity (MS) in both decibel (dB) and 1/Lambert (L) scales, were estimated by Spearman's rank correlation coefficient (rs) and multivariate median regression models (pseudo R2). The correlations were determined globally and for six RNFL sectors and their corresponding VF regions. Results The correlation between RNFL thickness and MS (in dB) was weaker in the PACG group (rs = 0.38, P = 0.004, pseudo R2 = 0.17) than in the POAG group (rs = 0.51, P <0.001, pseudo R2 = 0.31), but the difference in the magnitude of correlation was not significant (P = 0.42).With Bonferroni correction, the structure-function correlation was significant in the superotemporal (rs = 0.62), superonasal (rs = 0.56), inferonasal (rs = 0.53), and inferotemporal (rs = 0.50) sectors in the POAG group (all P <0.001), while it was significant only in the superotemporal (rs = 0.53) and inferotemporal (rs = 0.48) sectors in the PACG group (both P <0.001). The results were similar when MS was expressed as 1/L scale. Conclusions Both POAG and PACG eyes had moderate structure-function correlations using SLP. Compared to eyes with POAG, fewer RNFL sectors have significant structure-function correlations in eyes with PACG. PMID:20202618

  4. Refractory Epilepsy-MRI, EEG and CT scan, a Correlative Clinical Study

    Directory of Open Access Journals (Sweden)

    Dijana Nikodijevic

    2016-02-01

    CONCLUSION: Our study confirms that for an accurate diagnosis of refractory epilepsy in patients, a combination of neuroimaging and neurophysiologic methods is required. MRI showed to be highly sensitive in detecting the etiologic factor in RE patients, whereas EEG was sensitive in localization of the epileptogenic focus, with high correlation between these two methods. An early diagnosis of these patients is very important in having a better therapeutic response and prognosis for them.

  5. Plane-wave pseudopotential implementation and performance of SCAN meta-GGA exchange-correlation functional for extended systems

    Science.gov (United States)

    Yao, Yi; Kanai, Yosuke

    2017-06-01

    We present the implementation and performance of the strongly constrained and appropriately normed, SCAN, meta-GGA exchange-correlation (XC) approximation in the planewave-pseudopotential (PW-PP) formalism using the Troullier-Martins pseudopotential scheme. We studied its performance by applying the PW-PP implementation to several practical applications of interest in condensed matter sciences: (a) crystalline silicon and germanium, (b) martensitic phase transition energetics of phosphorene, and (c) a single water molecule physisorption on a graphene sheet. Given the much-improved accuracy over the GGA functionals and its relatively low computational cost compared to hybrid XC functionals, the SCAN functional is highly promising for various practical applications of density functional theory calculations for condensed matter systems. At same time, the SCAN meta-GGA functional appears to require more careful attention to numerical details. The meta-GGA functional shows more significant dependence on the fast Fourier transform grid, which is used for evaluating the XC potential in real space in the PW-PP formalism, than other more conventional GGA functionals do. Additionally, using pseudopotentials that are generated at a different/lower level of XC approximation could introduce noticeable errors in calculating some properties such as phase transition energetics.

  6. Using Hounsfield Units to Assess Osteoporotic Status on Wrist Computed Tomography Scans: Comparison With Dual Energy X-Ray Absorptiometry.

    Science.gov (United States)

    Johnson, Christine C; Gausden, Elizabeth B; Weiland, Andrew J; Lane, Joseph M; Schreiber, Joseph J

    2016-07-01

    Rates of evaluation and treatment for osteoporosis following distal radius fragility fractures remain low. As a subset of patients with these fractures undergo diagnostic computed tomography (CT) scan of the wrist, utilizing bone mineral density (BMD) measurements available with this imaging can be used to detect osteopenia or osteoporosis. This information may consequently prompt intervention to prevent a subsequent fracture. The purpose of this study was to determine if Hounsfield unit (HU) measurements at the wrist correlate with BMD measurements of the hip, femoral neck, and lumbar spine and to assess the ability of these HU measurements to detect osteoporosis of the hip. Forty-five female patients with distal radius fractures who underwent CT scan and dual energy x-ray absorptiometry scan as part of the management of their wrist fracture were identified. Bone mineral density measurements were made using the regional cancellous bone HU value at the capitate and compared with values obtained by a dual energy x-ray absorptiometry scan. Hounsfield unit values at the capitate were significantly correlated with BMD and t scores at the femoral neck, hip, and lumbar spine. An HU threshold of 307 in the capitate optimized sensitivity (86%) and specificity (94%) for detecting osteoporotic patients. By demonstrating that capitate HU measurements from clinical CT scans are correlated with BMD and t scores at the hip, femoral neck, and lumbar spine, our data suggest that clinical CT scans should have a role in detecting osteopenia and osteoporosis. Diagnostic III. Copyright © 2016 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

  7. CORRELATION OF NEUROLOGIC DYSFUNCTION WITH CT-SCAN BRAIN FINDINGS AND CAROTID DOPPLER STUDY IN ACUTE ISCHAEMIC STROKE

    Directory of Open Access Journals (Sweden)

    Bharat L

    2014-12-01

    Full Text Available BACKGROUND AND OBJECTIVES: stroke is one of the most common debilitating diseases with a huge burden related to both mortality and morbidity, ischemic stroke is far common compared to haemorrhagic stroke and also associated with significant carotid stenosis. Hence this present study is carried out to evaluate all the aspects of this disease. OBJECTIVES: 1. To correlate the nature of lesion, site of lesion, and severity of lesion on clinical grounds with CT-Scan findings. 2. To find the prevalence of Carotid Artery Stenosis in Acute Ischaemic Stroke patients. 3. To find if there is any association between Carotid Artery Stenosis and risk factors such as Diabetes mellitus, Hypertension, Hyperlipidemia, Smoking and Age.

  8. A Case Study Correlating Innovative Gamma Ray Scanning Detection Systems Data to Surface Soil Gamma Spectrometry Results - 13580

    Energy Technology Data Exchange (ETDEWEB)

    Thompson, Shannon; Rodriguez, Rene; Billock, Paul [HydroGeoLogic, Inc., 11107 Sunset Hills Road, Suite 400, Reston, VA 20190 (United States); Lit, Peter [Nomad Science Group, 7738 Nautilus Shell Street, Las Vegas, NV 89139 (United States)

    2013-07-01

    HydroGeoLogic (HGL), Inc. completed a United States Environmental Protection Agency (USEPA) study to characterize radiological contamination at a site near Canoga Park, California. The characterized area contained 470 acres including the site of a prototype commercial nuclear reactor and other nuclear design, testing, and support operations from the 1950's until 1988 [1]. The site history included radiological releases during operation followed by D and D activities. The characterization was conducted under an accelerated schedule and the results will support the project remediation. The project has a rigorous cleanup to background agenda and does not allow for comparison to risk-based guidelines. To target soil sample locations, multiple lines of evidence were evaluated including a gamma radiation survey, geophysical surveys, historical site assessment, aerial photographs, and former worker interviews. Due to the time since production and decay, the primary gamma emitting radionuclide remaining is cesium-137 (Cs-137). The gamma ray survey covered diverse, rugged terrain using custom designed sodium iodide thallium-activated (NaI(Tl)) scintillation detection systems. The survey goals included attaining 100% ground surface coverage and detecting gamma radiation as sensitively as possible. The effectiveness of innovative gamma ray detection systems was tested by correlating field Cs-137 static count ratios to Cs-137 laboratory gamma spectrometry results. As a case study, the area encompassing the former location of the first nuclear power station in the U. S. was scanned, and second by second global positioning system (GPS)-linked gamma spectral data were evaluated by examining total count rate and nuclide-specific regions of interest. To compensate for Compton scattering from higher energy naturally occurring radionuclides (U-238, Th-232 and their progeny, and K-40), count rate ratios of anthropogenic nuclide-specific regions of interest to the total count rate

  9. PHENIX results on fluctuations and Bose-Einstein correlations in Au+Au collisions from the RHIC Beam Energy Scan

    CERN Document Server

    Garg, Prakhar

    2016-01-01

    The RHIC Beam Energy Scan focuses on mapping the QCD phase diagram and pinpointing the location of a possible critical end point. Bose-Einstein correlations and event-by-event fluctuations of conserved quantities, measured as a function of centrality and collision energy, are promising tools in these studies. Recent lattice QCD and statistical thermal model calculations predict that higher-order cumulants of the fluctuations are sensitive indicators of the phase transition. Products of these cumulants can be used to extract the freeze-out parameters (1) and to locate the critical point (2). Two-pion interferometry measurements are predicted to be sensitive to potential softening of the equation of state and prolonged emission duration close to the critical point (3). We present recent PHENIX results on fluctuations of net-charge using high-order cumulants and their products in Au+Au collisions at \\sqsn = 7.7 - 200 GeV, and measurement of two-pion correlation functions and emission-source radii in Cu+Cu and Au...

  10. Raster image correlation spectroscopy (RICS) for measuring fast protein dynamics and concentrations with a commercial laser scanning confocal microscope.

    Science.gov (United States)

    Brown, C M; Dalal, R B; Hebert, B; Digman, M A; Horwitz, A R; Gratton, E

    2008-01-01

    Raster image correlation spectroscopy (RICS) is a new and novel technique for measuring molecular dynamics and concentrations from fluorescence confocal images. The RICS technique extracts information about molecular dynamics and concentrations from images of living cells taken on commercial confocal systems. Here we develop guidelines for performing the RICS analysis on an analogue commercial laser scanning confocal microscope. Guidelines for typical instrument settings, image acquisition settings and analogue detector characterization are presented. Using appropriate instrument/acquisition parameters, diffusion coefficients and concentrations can be determined, even for highly dynamic dye molecules in solution. Standard curves presented herein demonstrate the ability to detect protein concentrations as low as approximately 2 nM. Additionally, cellular measurements give accurate values for the diffusion of paxillin-enhanced-green fluorescent protein (EGFP), an adhesion adaptor molecule, in the cytosol of the cell and also show slower paxillin dynamics near adhesions where paxillin interacts with immobile adhesion components. Methods are presented to account for bright immobile structures within the cell that dominate spatial correlation functions; allowing the extraction of fast protein dynamics within and near these structures. A running average algorithm is also presented to address slow cellular movement or movement of cellular features such as adhesions. Finally, methods to determine protein concentration in the presence of immobile structures within the cell are presented. A table is presented giving guidelines for instrument and imaging setting when performing RICS on the Olympus FV300 confocal and these guidelines are a starting point for performing the analysis on other commercial confocal systems.

  11. Correlation in retinal nerve fibre layer thickness in uveitis and healthy eyes using scanning laser polarimetry and optical coherence tomography.

    Science.gov (United States)

    Bellocq, David; Maucort-Boulch, Delphine; Kodjikian, Laurent; Denis, Philippe

    2016-06-17

    To evaluate the correlation of retinal nerve fibre layer (RNFL) thickness measured using spectral domain optical coherence tomography (SD-OCT) and scanning laser polarimetry (SLP) in uveitic eyes compared with healthy eyes. A descriptive, observational, prospective, consecutive, cross-sectional, controlled, monocentre case series was conducted from May to October 2015. Clinical characteristics, best-corrected visual acuity, intraocular pressure, RNFL thickness measurement with SD-OCT and SLP using GDx variable corneal compensation (GDx VCC) were performed for each patient. An evaluation of anterior chamber inflammation with laser flare-cell meter was also carried out. Correlations between SD-OCT and GDx VCC RNFL measurement were evaluated by linear regression analysis. Fifty-four patients were included and divided into two groups: 50 healthy eyes in 29 patients and 42 uveitic eyes in 25 patients. The mean RNFL thickness was 98.08(±8.42) and 113.21(±20.53) μm in the healthy group and the uveitic group, respectively, when measured with SD-OCT (p<0.001); and 56.43(±5.24) and 58.77(±6.67) μm, respectively, when measured with GDx VCC (p=0.078). There was a strong correlation between total average RNFL thickness measured using SD-OCT and GDX (r=0.48, p<0.001) in healthy eyes but there was no correlation in the uveitic eyes (r=0.2, p=0.19). RNFL thickness was significantly greater when measured using SD-OCT in active uveitis as compared with GDx. There was no correlation between the RNFL thickness measurements obtained using the two techniques in uveitic eyes. The discrepancies between the results suggest that for these patients both techniques should be used in conjunction to obtain an accurate measurement of RNFL. IRB 00008855 Société Française d'Ophtalmologie IRB#1. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  12. Advanced human carotid plaque progression correlates positively with flow shear stress using follow-up scan data: an in vivo MRI multi-patient 3D FSI study.

    Science.gov (United States)

    Yang, Chun; Canton, Gador; Yuan, Chun; Ferguson, Marina; Hatsukami, Thomas S; Tang, Dalin

    2010-09-17

    Although it has been well-accepted that atherosclerosis initiation and early progression correlate negatively with flow wall shear stresses (FSS), increasing evidence suggests mechanisms governing advanced plaque progression are not well understood. Fourteen patients were scanned 2-4 times at 18 month intervals using a histologically validated multi-contrast magnetic resonance imaging (MRI) protocol to acquire carotid plaque progression data. Thirty-two scan pairs (baseline and follow-up scans) were formed with slices matched for model construction and analysis. 3D fluid-structure interaction (FSI) models were constructed and plaque wall stress (PWS) and flow shear stress (FSS) were obtained from all matching lumen data points (400-1000 per plaque; 100 points per matched slice) to quantify correlations with plaque progression measured by vessel wall thickness increase (WTI). Using FSS and PWS data from follow-up scan, 21 out of 32 scan pairs showed a significant positive correlation between WTI and FSS (positive/negative/no significance ratio=21/8/3), and 26 out of 32 scan pairs showed a significant negative correlation between WTI and PWS (positive/negative/no significance ratio=2/26/4). The mean FSS value of lipid core nodes (n=5294) from all 47 plaque models was 63.5dyn/cm(2), which was 45% higher than that from all normal vessel nodes (n=27553, p<0.00001). The results from this intensive FSI study indicate that flow shear stress from follow-up scan correlates positively with advanced plaque progression which is different from what has been observed in plaque initiation and early-stage progression. It should be noted that the correlation results do not automatically lead to any causality conclusions.

  13. Automatic lumbar vertebra segmentation from clinical CT for wedge compression fracture diagnosis

    Science.gov (United States)

    Ghosh, Subarna; Alomari, Raja'S.; Chaudhary, Vipin; Dhillon, Gurmeet

    2011-03-01

    Lumbar vertebral fractures vary greatly in types and causes and usually result from severe trauma or pathological conditions such as osteoporosis. Lumbar wedge compression fractures are amongst the most common ones where the vertebra is severely compressed forming a wedge shape and causing pain and pressure on the nerve roots and the spine. Since vertebral segmentation is the first step in any automated diagnosis task, we present a fully automated method for robustly localizing and segmenting the vertebrae for preparation of vertebral fracture diagnosis. Our segmentation method consists of five main steps towards the CAD(Computer-Aided Diagnosis) system: 1) Localization of the intervertebral discs. 2) Localization of the vertebral skeleton. 3) Segmentation of the individual vertebra. 4) Detection of the vertebrae center line and 5) Detection of the vertebrae major boundary points. Our segmentation results are promising with an average error of 1.5mm (modified Hausdorff distance metric) on 50 clinical CT cases i.e. a total of 250 lumbar vertebrae. We also present promising preliminary results for automatic wedge compression fracture diagnosis on 15 cases, 7 of which have one or more vertebral compression fracture, and obtain an accuracy of 97.33%.

  14. State of the water in crosslinked sulfonated poly(ether ether ketone). Two-dimensional differential scanning calorimetry correlation mapping

    Energy Technology Data Exchange (ETDEWEB)

    Al Lafi, Abdul G. [Department of Chemistry, Atomic Energy Commission, Damascus, P.O. Box 6091 (Syrian Arab Republic); Hay, James N., E-mail: cscientific9@aec.org.sy [The School of Metallurgy and Materials, College of Physical Sciences and Engineering, University of Birmingham, Edgbaston, Birmingham B15 2TT (United Kingdom)

    2015-07-20

    Highlights: • 2D-DSC mapping was applied to analyze the heat flow responses of hydrated crosslinked sPEEK. • Two types of loosely bond water were observed. • The first was bond to the sulfonic acid groups and increased with ion exchange capacity. • The second was attributed to the polar groups introduced by ions irradiation and increased with crosslinking degree. • DSC combined with 2D mapping provides a powerful tool for polymer structural determination. - Abstract: This paper reports the first application of two-dimensional differential scanning calorimetry correlation mapping, 2D-DSC-CM to analyze the heat flow responses of sulphonated poly(ether ether ketone), sPEEK, films having different ion exchange capacity and degrees of crosslinks. With the help of high resolution and high sensitivity of 2D-DSC-CM, it was possible to locate two types of loosely bound water within the structure of crosslinked sPEEK. The first was bound to the sulfonic acid groups and dependent on the ion exchange capacity of the sPEEK. The second was bound to other polar groups, either introduced by irradiation with ions and dependent on the crosslinking degree or present in the polymer such as the carbonyl groups or terminal units. The results suggest that the ability of the sulfonic acid groups in the crosslinked sPEEK membranes to adsorb water molecules is increased by crosslinking, probably due to the better close packing efficiency of the crosslinked samples. DSC combined with 2D correlation mapping provides a fast and powerful tool for polymer structural determination.

  15. Cross-Correlation of Diameter Measures for the Co-Registration of Forest Inventory Plots with Airborne Laser Scanning Data

    Directory of Open Access Journals (Sweden)

    Jean-Matthieu Monnet

    2014-09-01

    Full Text Available Continuous maps of forest parameters can be derived from airborne laser scanning (ALS remote sensing data. A prediction model is calibrated between local point cloud statistics and forest parameters measured on field plots. Unfortunately, inaccurate positioning of field measures lead to a bad matching of forest measures with remote sensing data. The potential of using tree diameter and position measures in cross-correlation with ALS data to improve co-registration is evaluated. The influence of the correction on ALS models is assessed by comparing the accuracy of basal area prediction models calibrated or validated with or without the corrected positions. In a coniferous, uneven-aged forest with high density ALS data and low positioning precision, the algorithm co-registers 91% of plots within two meters from the operator location when at least the five largest trees are used in the analysis. The new coordinates slightly improve the prediction models and allow a better estimation of their accuracy. In a forest with various stand structures and species, lower ALS density and differential Global Navigation Satellite System measurements, position correction turns out to have only a limited impact on prediction models.

  16. Correlations between Photovoltaic Characteristics, Adsorption Number, and Regeneration Kinetics in Dye-Sensitized Solar Cells Revealed by Scanning Photocurrent Microscopy.

    Science.gov (United States)

    Mitsui, Masaaki; Kawano, Yuya; Mori, Kyosuke; Wakabayashi, Naoto

    2015-06-30

    Newly developed simultaneous scanning photocurrent and luminescence microscopy was applied to ruthenium-based dye-sensitized solar cells (DSCs) comprising a cover glass photoanode with a 100 nm thick TiO2 layer. Using this, we have investigated the lateral variations of several parameters of these DSCs under short-circuit conditions. Simultaneous measurement of photocurrent and luminescence images for the same area of the DSC demonstrated submicrometric lateral resolution of our photocurrent microscopy, which is approximately 10 times better than the resolution of photocurrent microscopy used in past studies. The photovoltaic parameters, such as short-circuit current density, open-circuit voltage, and charge-collection efficiency, were thus evaluated for local (or submicrometric) regions of the DSCs. Furthermore, the photocurrent saturation behavior of the DSCs was examined as a function of the excitation rate and analyzed on the basis of a three-state kinetic model. This protocol allowed for quantification of the dye-adsorption number and dye-regeneration rate constant for any local area of the DSCs. Consequently, the correlations between the dye adsorption number, photovoltaic parameters, and regeneration rate constant, which are difficult to address through examination of the entire cell, were revealed by the "zoom-in" approach utilizing this high-resolution photocurrent microscopy.

  17. Scanning fluorescence correlation spectroscopy as a versatile tool to measure static and dynamic properties of soft matter systems.

    Science.gov (United States)

    Nepal, Manish; Oyler-Yaniv, Alon; Krichevsky, Oleg

    2015-12-14

    We present the formalism and experimental implementation of scanning fluorescence correlation spectroscopy (SFCS) for the measurements of soft matter system structure and dynamics. We relate the SFCS function Fourier transform to the system intermediate scattering function and demonstrate how SFCS can be combined with specific labelling to measure the desired statistical and kinetic features of the system. Using DNA as a model polymer, we demonstrate the application of SFCS to measure (1) the static structure factor of the system, (2) polymer end-to-end distance distribution, and (3) polymer segmental dynamics in dilute and in dense solutions. The measured DNA end-to-end distance distributions are close to Gaussian. Implementing SFCS we obtain reliable data on segmental mean-square displacement kinetics in dense solutions, where the static FCS approach fails because of dye photobleaching. For moderate concentrations in the semidilute regime (at ∼7 overlap concentrations) segmental dynamics exhibit only weak entanglements. Both of these experimental findings are consistent with theoretical predictions of the weakness of excluded interactions in semiflexible polymers.

  18. Quantitating morphological changes in biological samples during scanning electron microscopy sample preparation with correlative super-resolution microscopy.

    Science.gov (United States)

    Zhang, Ying; Huang, Tao; Jorgens, Danielle M; Nickerson, Andrew; Lin, Li-Jung; Pelz, Joshua; Gray, Joe W; López, Claudia S; Nan, Xiaolin

    2017-01-01

    Sample preparation is critical to biological electron microscopy (EM), and there have been continuous efforts on optimizing the procedures to best preserve structures of interest in the sample. However, a quantitative characterization of the morphological changes associated with each step in EM sample preparation is currently lacking. Using correlative EM and superresolution microscopy (SRM), we have examined the effects of different drying methods as well as osmium tetroxide (OsO4) post-fixation on cell morphology during scanning electron microscopy (SEM) sample preparation. Here, SRM images of the sample acquired under hydrated conditions were used as a baseline for evaluating morphological changes as the sample went through SEM sample processing. We found that both chemical drying and critical point drying lead to a mild cellular boundary retraction of ~60 nm. Post-fixation by OsO4 causes at least 40 nm additional boundary retraction. We also found that coating coverslips with adhesion molecules such as fibronectin prior to cell plating helps reduce cell distortion from OsO4 post-fixation. These quantitative measurements offer useful information for identifying causes of cell distortions in SEM sample preparation and improving current procedures.

  19. Single-scan scatter correction in CBCT by using projection correlation based view interpolation (PC-VI) and a stationary ring-shaped beam stop array (BSA)

    CERN Document Server

    Yan, Hao; Zhang, Yanbo; Zankl, Maria

    2014-01-01

    In the scatter correction for x-ray Cone Beam (CB) CT, the single-scan scheme with moving Beam Stop Array (BSA) offers reliable scatter measurement with low dose, and by using Projection Correlation based View Interpolation (PC-VI), the primary fluence shaded by the moving BSA (during scatter measurement) could be recovered with high accuracy. However, the moving BSA may increase the mechanical burden in real applications. For better practicability, in this paper we proposed a PC-VI based single-scan scheme with a ring-shaped stationary BSA, which serves as a virtual moving BSA during CB scan, so the shaded primary fluence by this stationary BSA can be also well recovered by PC-VI. The principle in designing the whole system is deduced and evaluated. The proposed scheme greatly enhances the practicability of the single-scan scatter correction scheme.

  20. Correlation of spicule sign on computed tomography scans with peripheral lung cancers associated with interstitial lung disease and chronic obstructive pulmonary disease.

    Science.gov (United States)

    Chen, L; Gao, L; Wu, W L

    2015-03-27

    The objective of this study was to investigate the correlation between spicular signs on computed tomography (CT) scans and peripheral lung cancer (PLC) that is associated with interstitial lung disease (ILD) and chronic obstructive pulmonary disease (COPD). We analyzed clinical data from 96 PLC cases and grouped patients based on whether they had interstitial pneumonia into either ILD/COPD group or non-ILD/COPD group. The occurrence rate of spicule sign was 90.3% in the ILD/COPD group and 61.8% in the non-ILD/COPD group, respectively. There was a significant difference between these groups (P < 0.05). There were no significant differences in the occurrence rate of spicular signs among patients with different pathological types of PLC. The severity of ILD affected the spicular morphology on CT scans directly. There was a significant correlation between the appearance of spicule sign on CT scans and PLC that was associated with ILD/COPD.

  1. Enhanced lung scan diagnosis of pulmonary embolism with the use of ancillary scintigraphic findings and clinical correlation.

    Science.gov (United States)

    Freeman, L M; Krynyckyi, B; Zuckier, L S

    2001-04-01

    Analysis of the Prospective Investigation of Pulmonary Embolism Diagnosis (PIOPED) and modified PIOPED studies has suggested that an experienced observer is capable of more accurate lung scan interpretation than the less experienced individual. This has been attributed to the use of unique Gestalt factors not contained in published diagnostic algorithms, which are acquired through extensive experience in reviewing and interpreting lung scans. How fully these factors can be codified and transmitted to less experienced observers is uncertain; however, there is a large body of published data that attempts to convey fine points of lung scan interpretation, including a large body of ancillary scintigraphic findings and a number of refinements in the application of diagnostic algorithms. Review of these factors will accelerate the training of less experienced readers. Finally, an understanding of lung scan language and an appreciation of clinically relevant factors, particularly pretest probability, will maximize the reader's ability to use the lung scan in managing patients who are suspected of having pulmonary embolic disease.

  2. Correlation between Fe-Zn Interdiffusion Observed by Scanning Capacitance Microscopy and Device Characteristics of Electro-Absorption Modulators

    Science.gov (United States)

    Ogasawara, Matsuyuki; Iga, Ryuzo; Yamanaka, Takayuki; Kondo, Susumu; Kondo, Yasuhiro

    2003-04-01

    The advantages of scanning capacitance microscopy (SCM) in observing Fe-Zn interdiffusion of an electro-absorption (EA) modulator and the relationship between the interdiffusion and device characteristics are discussed. SCM images show that there is a Zn diffusion region, in which the semi-insulating region is converted into p-type due to Zn diffusion, on both sides of the mesa and the Zn diffusion region becomes smaller as the Fe doping concentration is reduced. By comparison, scanning electron microscopy (SEM) images captured after stain etching of EA modulators did not clearly delineate the Zn diffusion front. The influence of a ruthenium (Ru)-doped InP burying layer on the interdiffusion has also been investigated by SCM. These results indicate that in order to improve the performance of EA modulators, it is important to prevent Zn diffusion into the semi-insulating layers.

  3. Self-reported fatigue common among optimally treated HIV patients: no correlation with cerebral FDG-PET scanning abnormalities

    DEFF Research Database (Denmark)

    Andersen, Ase B; Law, Ian; Ostrowski, Sisse R;

    2006-01-01

    patients (n = 95), known to be HIV positive for 5 years, on anti-retroviral therapy for a minimum of 3 years and with CD4 counts above 0.2 x 10(9) cells/l, completed a validated fatigue inventory, and plasma was analysed for pro-inflammatory markers including tumour necrosis factor-alpha, interleukin 6...... and soluble urokinase receptor (suPAR) levels. The distribution of the regional cerebral metabolic rate of glucose was measured in a sub-group of patients suffering from severe fatigue (n = 9) and a group with no fatigue (n = 7) using fluorine-18-fluorodeoxyglucose positron emission tomography (FDG-PET......) scanning. RESULTS: Fifteen percent suffered from severe fatigue, but no association with pro-inflammatory markers was found. About 50% of the FDG-PET-scanned patients showed minor abnormalities in the relative cerebral metabolic rate of glucose. These abnormalities were not associated with fatigue...

  4. Investigation of biodistribution behavior of platinum particles in mice: Correlation between inductively coupled plasma-atomic emission spectroscopy and X-ray scanning analytical microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Abe, Shigeaki, E-mail: sabe@den.hokudai.ac.jp [Graduate School of Dental Medicine, Hokkaido University, Sapporo (Japan); Koyama, Chika; Mutoh, Mami [Faculty of Dental Medicine, Hokkaido University, Sapporo (Japan); Akasaka, Tsukasa [Graduate School of Dental Medicine, Hokkaido University, Sapporo (Japan); Uo, Motohiro [Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University, Tokyo (Japan); Watari, Fumio [Graduate School of Dental Medicine, Hokkaido University, Sapporo (Japan)

    2012-12-01

    Highlights: Black-Right-Pointing-Pointer We investigated the biodistribution of platinum microparticles in mice. Black-Right-Pointing-Pointer The biodistribution behavior was observed using inductively coupled plasma-atomic emission spectroscopy (ICP) and scanning X-ray analytical microscopy (XSAM). Black-Right-Pointing-Pointer The administered particles quickly reached in spleen, liver and lung with constant ration. Black-Right-Pointing-Pointer We also estimated the correlation ship between XSAM and ICP measurement. Black-Right-Pointing-Pointer The relative ratio of XSAM intensity showed highly correlation with the relative ratio of Pt concentration in organs. - Abstract: In this study, we investigated the biodistribution of platinum (Pt) microparticles in mice. The particles were administered through the tail vein, and then the biodistribution behavior was observed using inductively coupled plasma-atomic emission spectroscopy (ICP) and scanning X-ray analytical microscopy (XSAM). The administered particles quickly reached the spleen, liver, and lung at a constant ratio, and the ratio remained constant for four weeks. We also estimated the correlation between XSAM and ICP measurement. The relative ratio of XSAM intensity showed strong correlation with the relative ratio of Pt concentration in organs.

  5. Correlation between Formic Acid Oxidation and Oxide Species on Pt(Bi/GC and Pt/GC Electrode through the Effect of Forward Potential Scan Limit

    Directory of Open Access Journals (Sweden)

    Jelena D. Lović

    2017-01-01

    Full Text Available Following earlier works from our laboratory, further experiments on electrochemical behavior in formic acid oxidation at electrodeposited Pt(Bi/GC and Pt/GC electrode were performed in order to examine the effect of successive increase of the forward potential scan limit. Correlation between formic acid oxidation and oxide species on Pt(Bi/GC electrode with increases of forward potential scan limit is based on the dependency of the backward peak potential from backward peak current. The obtained dependency reveals Bi influence for the scan limits up to 0.8 V. Since the Pt(Bi/GC electrode is composed of Bi core occluded by Pt and Bi-oxide surface layer, the observed behavior is explained through the influence of surface metal oxide on easier formation of OHad species. Nevertheless, the influence of electronic modification of Pt surface atoms by underlying Bi is present and leads to the stronger adsorption of OH on Pt. At higher forward potential scan limits (from 0.8 V, Pt has a dominant role in HCOOH oxidation.

  6. Measurements of Epidural Space Depth Using Preexisting CT Scans Correlate with Loss of Resistance Depth during Thoracic Epidural Catheter Placement

    Directory of Open Access Journals (Sweden)

    Nathaniel H. Greene

    2015-01-01

    Full Text Available Background. Thoracic epidural catheters provide the best quality postoperative pain relief for major abdominal and thoracic surgical procedures, but placement is one of the most challenging procedures in the repertoire of an anesthesiologist. Most patients presenting for a procedure that would benefit from a thoracic epidural catheter have already had high resolution imaging that may be useful to assist placement of a catheter. Methods. This retrospective study used data from 168 patients to examine the association and predictive power of epidural-skin distance (ESD on computed tomography (CT to determine loss of resistance depth acquired during epidural placement. Additionally, the ability of anesthesiologists to measure this distance was compared to a radiologist, who specializes in spine imaging. Results. There was a strong association between CT measurement and loss of resistance depth (P35 changed this relationship (P=0.007. The ability of anesthesiologists to make CT measurements was similar to a gold standard radiologist (all individual ICCs>0.9. Conclusions. Overall, this study supports the examination of a recent CT scan to aid in the placement of a thoracic epidural catheter. Making use of these scans may lead to faster epidural placements, fewer accidental dural punctures, and better epidural blockade.

  7. Correlative Fluorescence and Scanning Electron Microscopy of Labelled Core Fucosylated Glycans Using Cryosections Mounted on Carbon-Patterned Glass Slides.

    Science.gov (United States)

    Vancová, Marie; Nebesářová, Jana

    2015-01-01

    The aim of the study is co-localization of N-glycans with fucose attached to N-acetylglucosamine in α1,3 linkage, that belong to immunogenic carbohydrate epitopes in humans, and N-glycans with α1,6-core fucose typical for mammalian type of N-linked glycosylation. Both glycan epitopes were labelled in cryosections of salivary glands isolated from the tick Ixodes ricinus. Salivary glands secrete during feeding many bioactive molecules and influence both successful feeding and transmission of tick-borne pathogens. For accurate and reliable localization of labelled glycans in both fluorescence and scanning electron microscopes, we used carbon imprints of finder or indexed EM grids on glass slides. We discuss if the topographical images can provide information about labelled structures, the working setting of the field-emission scanning electron microscope and the influence of the detector selection (a below-the-lens Autrata improved YAG detector of back-scattered electrons; in-lens and conventional Everhart-Thornley detectors of secondary electrons) on the imaging of gold nanoparticles, quantum dots and osmium-stained membranes.

  8. Correlative Fluorescence and Scanning Electron Microscopy of Labelled Core Fucosylated Glycans Using Cryosections Mounted on Carbon-Patterned Glass Slides.

    Directory of Open Access Journals (Sweden)

    Marie Vancová

    Full Text Available The aim of the study is co-localization of N-glycans with fucose attached to N-acetylglucosamine in α1,3 linkage, that belong to immunogenic carbohydrate epitopes in humans, and N-glycans with α1,6-core fucose typical for mammalian type of N-linked glycosylation. Both glycan epitopes were labelled in cryosections of salivary glands isolated from the tick Ixodes ricinus. Salivary glands secrete during feeding many bioactive molecules and influence both successful feeding and transmission of tick-borne pathogens. For accurate and reliable localization of labelled glycans in both fluorescence and scanning electron microscopes, we used carbon imprints of finder or indexed EM grids on glass slides. We discuss if the topographical images can provide information about labelled structures, the working setting of the field-emission scanning electron microscope and the influence of the detector selection (a below-the-lens Autrata improved YAG detector of back-scattered electrons; in-lens and conventional Everhart-Thornley detectors of secondary electrons on the imaging of gold nanoparticles, quantum dots and osmium-stained membranes.

  9. [Correlation of liver stiffness measured by FibroTouch and FibroScan with Ishak fibrosis score in patients with chronic hepatitis B].

    Science.gov (United States)

    Chen, G F; Ping, J; Gu, H T; Zhao, Z M; Zhou, Y; Xing, F; Tao, Y Y; Mu, Y P; Liu, P; Liu, C H

    2017-02-20

    Objective: To investigate the correlation of liver stiffness measured by FibroTouch (FT) and FibroScan (FS) with Ishak fibrosis score in patients with chronic hepatitis B. Methods: A total of 313 patients with chronic hepatitis B who visited Department of Liver Cirrhosis in Shuguang Hospital Affiliated to Shanghai University of Traditional Chinese Medicine from November 2014 to May 2016 were enrolled. All the patients underwent liver biopsy, and FT and FS were used to determine liver stiffness measurement (LSM). Serum biochemical parameters were measured, and the aspartate aminotransferase-to-platelet ratio index (APRI) in a multi-parameter model of liver fibrosis and fibrosis-4 (FIB-4) index were calculated. The consistency between the results of four noninvasive examinations and Ishak fibrosis score was compared. The t-test was used for comparison of LSM determined by FT and FS. Pearson correlation analysis was used investigate the correlation between LSM determined by FT and FS; Spearman correlation analysis was used to investigate the correlation of serum alanine aminotransferase (ALT) and aspartate aminotransferase (AST) levels and Knodell score with LSM determined by FT and FS; the correlation between LSM determined by FT and FS and fibrosis stage was analyzed by partial correlation analysis adjusted by Knodell score for liver inflammatory activity; Spearman correlation analysis was used for APRI, FIB-4, and fibrosis stage. Based on the Ishak fibrosis score, the receiver operating characteristic (ROC) curve was used to analyze the values of four noninvasive methods in the diagnosis of liver fibrosis. Results: There was no significant difference in LSM measured by FT and FS in all patients (15.75±9.42 kPa vs 15.42±10.52 kPa, P > 0.05) and Pearson correlation analysis indicated a significant positive correlation between them (r = 0.858, P correlated with LSM determined by FT and FS. There was a significant positive correlation between LSM determined by FT and

  10. Making sense of large data sets without annotations: analyzing age-related correlations from lung CT scans

    Science.gov (United States)

    Dicente Cid, Yashin; Mamonov, Artem; Beers, Andrew; Thomas, Armin; Kovalev, Vassili; Kalpathy-Cramer, Jayashree; Müller, Henning

    2017-03-01

    The analysis of large data sets can help to gain knowledge about specific organs or on specific diseases, just as big data analysis does in many non-medical areas. This article aims to gain information from 3D volumes, so the visual content of lung CT scans of a large number of patients. In the case of the described data set, only little annotation is available on the patients that were all part of an ongoing screening program and besides age and gender no information on the patient and the findings was available for this work. This is a scenario that can happen regularly as image data sets are produced and become available in increasingly large quantities but manual annotations are often not available and also clinical data such as text reports are often harder to share. We extracted a set of visual features from 12,414 CT scans of 9,348 patients that had CT scans of the lung taken in the context of a national lung screening program in Belarus. Lung fields were segmented by two segmentation algorithms and only cases where both algorithms were able to find left and right lung and had a Dice coefficient above 0.95 were analyzed. This assures that only segmentations of good quality were used to extract features of the lung. Patients ranged in age from 0 to 106 years. Data analysis shows that age can be predicted with a fairly high accuracy for persons under 15 years. Relatively good results were also obtained between 30 and 65 years where a steady trend is seen. For young adults and older people the results are not as good as variability is very high in these groups. Several visualizations of the data show the evolution patters of the lung texture, size and density with age. The experiments allow learning the evolution of the lung and the gained results show that even with limited metadata we can extract interesting information from large-scale visual data. These age-related changes (for example of the lung volume, the density histogram of the tissue) can also be

  11. Evaluation of mediastinal lymph nodes using 18 F-FDG PET-CT scan and its histopathologic correlation

    Directory of Open Access Journals (Sweden)

    Kumar Arvind

    2011-01-01

    Full Text Available Aims and Objectives: To determine the efficacy of integrated 18 F-fluorodeoxy glucose positron emission tomography-computed tomography ( 18 F-FDG PET-CT in the evaluation and characterization of mediastinal lymph nodes into benign and malignant pathology. Methods: Thirty-five patients with mediastinal lymphadenopathies without primary neoplastic or infective lung pathologies were included in the study. The lymph nodes were detected on contrast-enhanced CT scan of the chest. All patients underwent 18 F-FDG PET-CT scan for evaluation of mediastinal lymph nodes. Results of PET-CT were compared with histopathology of the lymph nodes and sensitivity, specificity, positive predictive value, negative predictive value, and accuracy were calculated. Statistical Analysis: The data were collected prospectively and analyzed using (SPSS Inc., Chicago, IL 11.5 software. Results: Histopathology results in 35 patients revealed tuberculosis in 12, sarcoidosis in 8, and lymphoma in 15. Maximum standardized uptake value (SUVmax of the benign lymph nodes ranged from 2.3 to 11.8 with a mean±standard deviation (SD of 5.02±3.26. SUVmax of the malignant lymph nodes ranged from 2.4 to 34 with a mean±SD of 10.8±8.12. There was a statistically significant difference between benign and malignant pathology (P<0.0059. 18 F-FDG PET-CT has sensitivity of 93% and specificity of 40% with SUVmax 2.5 as the cutoff. We found the optimal SUVmax cutoff to be 6.2 as determined by the receiver-operator characteristic curve. With 6.2 as cutoff, the sensitivity, specificity, and accuracy were 87%, 70%, and 77%, respectively. Conclusion : In countries where tuberculosis and other granulomatous diseases are endemic, SUVmax cutoff value of 2.5 has low specificity. Increasing the cutoff value can improve the specificity, while maintaining an acceptable sensitivity.

  12. Nuclear magnetic resonance imaging with cardiac synchronization in chronic thrombosis of main pulmonary arteries. A case review with CT scan imaging correlation

    Energy Technology Data Exchange (ETDEWEB)

    Coulomb, M.; Wolf, J.E.; Rose-Pittet, L.; Le Bas, J.F.; Dalsoglio, S.; Paramelle, B.

    Results of nuclear magnetic resonance exploration in a patient with chronic thrombosis of main pulmonary arteries are used to outline an elementary semiology in agreement with current documented data. Signs observed relate to the thrombosis and showing of flow due to associated pulmonary artery hypertension. Cardiac synchronization is essential: obtaining 2 echos by the spin-echo technique allows differentiation of circulatory slowing phenomena, which provoke increased strength of 2nd echo, from the thrombus itself. Correlations established with V/Q scintigraphy, angiography and CT scan findings in this case provided preliminary evaluation of use of this imaging technique in this affection.

  13. Correlation of histological findings with gadolinium enhanced MRI scans during healing of a PHEMA orbital implant in rabbits

    OpenAIRE

    Hicks, C.; Morris, I.; Vijayasekaran, S; Fallon, M.; McAllister, J.; Clayton, A.; Chirila, T.; Crawford, G; Constable, I

    1999-01-01

    BACKGROUND/AIMS—To investigate a poly(2-hydroxyethyl methacrylate) (PHEMA) orbital implant with a spongy anterior hemisphere and a smooth gel posterior hemisphere, by histology correlated with magnetic resonance images.
METHODS—Following enucleation, eight rabbits received PHEMA implants to which the muscles were directly sutured, and underwent gadolinium enhanced magnetic resonance imaging (MRI) from 3 to 52 weeks. After the rabbits were killed, the implants were removed, cut in a plane corr...

  14. {sup 99m}Tc-HDP Pinhole Bone Scan Features of Undetached Osteochondritis Dissecans of the Femoral Condyle: Report of a Case with Radiography, CT, and MRI Correlation

    Energy Technology Data Exchange (ETDEWEB)

    Bahk, Yong Whee [Sung Ae Hospital, Seoul (Korea, Republic of); Choi, Woo Hee [Seoul St. Mary' s Hospital, Catholic University Medical School, Seoul (Korea, Republic of)

    2009-02-15

    OCD may be initiated by arrest of bone growth and subchondral osteosclerosis followed by either cartilage hypertrophy with calcification or enfolding with osteochondral bridging. Diagnosis can be made in most instances using magnetic resonance imaging (MRI) or computed tomography (CT) or invasive arthroscopy. As to usefulness of conventional radiography (CR) opinions diverge as some held it to be of limited value while others valuable. The controversy seems to be due to semantic confusion of OCD from osteonecrosis (ON) which are different entities. This report will describe a case of undetached OCD occurred in the medial femoral condyle in a middle-aged female. It was free of symptom and incidentally discovered on {sup 99m}Tc-HDP pinhole scan performed for patellar injury. Pinhole scan findings of OCD are correlated to those of CR, CT, and MRI. An electronic search of literature failed to reveal earlier publication of bone scan features of undetached OCD. Pathologically, OCD differs from ON in that the fragment in the former condition comes off from a normal vascular bony bed while that in the latter separates from an avascular bony bed. Indeed, bone fragment in ON is devascularized but that in OCD maintains vascularity until weighted images, respectively and the halo showed low signal intensity on both T1 and T2 images.

  15. The prevalence of chondrocalcinosis of the symphysis pubis on CT scan and correlation with calcium pyrophosphate dihydrate crystal deposition disease.

    Science.gov (United States)

    Patel, Trusha; Ryan, Lawrence; Dubois, Melissa; Carrera, Guillermo; Baynes, Keith; Mannem, Rajeev; Mulkerin, Jennifer; Visotcky, Alexis

    2016-03-01

    Calcium pyrophosphate dihydrate (CPP) crystal deposition in the articular cartilage can often be seen radiographically as chondrocalcinosis (CC). CPP crystals preferentially deposit in fibrocartilages such as the knee menisci and symphysis pubis (SP). We sought to determine the prevalence of CC in the SP on computed tomography (CT) of the abdomen and pelvis. This retrospective study involved readings on 1070 consecutive CTs of the abdomen and pelvis performed over 3 months in patients over 65 years of age. Medical records of 226 patients found to have CC were reviewed to determine age, gender, documentation of CPPD on problem lists or in medical histories, and whether radiology readings of the CTs mentioned CC. SP CC was identified in 21.1 % (226/1070) of consecutive CT scans with the mean age of CT+ patients being 78.6. Of the 226 patients with SP CC, the observation of CC was documented in only 5.3 % (12/226) of the radiology reports. Of the 12 instances in which the radiology reports mentioned CC, this observation was never (0/12) transmitted to the medical history or problem list. The prevalence of SP CC in patients older than 65 was 21.1 %. Since the majority of CTs of the abdomen and pelvis are not ordered for evaluation of musculoskeletal conditions, this is likely a true prevalence without selection bias. When CC of the SP was present on images, radiologists routinely overlooked or chose not to report CC. Even in the rare instances when it was reported, that information was not added to the medical history or problem list. There are several clinical situations (e.g., acute monoarthritis or atypical osteoarthritis) in which recognizing that a patient has CPP deposition would be useful. Taking the time to review images may yield clinically important findings that are not mentioned anywhere on the patient chart.

  16. Rapid phase-correlated rescanning irradiation improves treatment time in carbon-ion scanning beam treatment under irregular breathing

    Science.gov (United States)

    Mori, Shinichiro; Furukawa, Takuji

    2016-05-01

    To shorten treatment time in pencil beam scanning irradiation, we developed rapid phase-controlled rescanning (rPCR), which irradiates two or more isoenergy layers in a single gating window. Here, we evaluated carbon-ion beam dose distribution with rapid and conventional PCR (cPCR). 4 dimensional computed tomography (4DCT) imaging was performed on 12 subjects with lung or liver tumors. To compensate for intrafractional range variation, the field-specific target volume (FTV) was calculated using 4DCT within the gating window (T20-T80). We applied an amplitude-based gating strategy, in which the beam is on when the tumor is within the gating window defined by treatment planning. Dose distributions were calculated for layered phase-controlled rescanning under an irregular respiratory pattern, although a single 4DCT data set was used. The number of rescannings was eight times. The prescribed doses were 48 Gy(RBE)/1 fr (where RBE is relative biological effectiveness) delivered via four beam ports to the FTV for the lung cases and 45 Gy(RBE)/2 fr delivered via two beam ports to the FTV for the liver cases. In the liver cases, the accumulated dose distributions showed an increased magnitude of hot/cold spots with rPCR compared with cPCR. The results of the dose assessment metrics for the cPCR and rPCR were very similar. The D 95, D max, and D min values (cPCR/rPCR) averaged over all the patients were 96.3  ±  0.9%/96.0  ±  1.2%, 107.3  ±  3.6%/107.1  ±  2.9%, and 88.8  ±  3.2%/88.1  ±  3.1%, respectively. The treatment times in cPCR and rPCR were 110.7 s and 53.5 s, respectively. rPCR preserved dose conformation under irregular respiratory motion and reduced the total treatment time compared with cPCR.

  17. Correlative Light and Scanning Electron Microscopy for Observing the Three-Dimensional Ultrastructure of Membranous Cell Organelles in Relation to Their Molecular Components.

    Science.gov (United States)

    Koga, Daisuke; Kusumi, Satoshi; Bochimoto, Hiroki; Watanabe, Tsuyoshi; Ushiki, Tatsuo

    2015-12-01

    Although the osmium maceration method has been used to observe three-dimensional (3D) structures of membranous cell organelles with scanning electron microscopy (SEM), the use of osmium tetroxide for membrane fixation and the removal of cytosolic soluble proteins largely impairs the antigenicity of molecules in the specimens. In the present study, we developed a novel method to combine cryosectioning with the maceration method for correlative immunocytochemical analysis. We first immunocytochemically stained a semi-thin cryosection cut from a pituitary tissue block with a cryo-ultramicrotome, according to the Tokuyasu method, before preparing an osmium-macerated specimen from the remaining tissue block. Correlative microscopy was performed by observing the same area between the immunostained section and the adjacent face of the tissue block. Using this correlative method, we could accurately identify the gonadotropes of pituitary glands in various experimental conditions with SEM. At 4 weeks after castration, dilated cisternae of rough endoplasmic reticulum (RER) were distributed throughout the cytoplasm. On the other hand, an extremely dilated cisterna of the RER occupied the large region of the cytoplasm at 12 weeks after castration. This novel method has the potential to analyze the relationship between the distribution of functional molecules and the 3D ultrastructure in different composite tissues.

  18. Attempt of correlative observation of morphological synaptic connectivity by combining confocal laser-scanning microscope and FIB-SEM for immunohistochemical staining technique.

    Science.gov (United States)

    Sonomura, Takahiro; Furuta, Takahiro; Nakatani, Ikuko; Yamamoto, Yo; Honma, Satoru; Kaneko, Takeshi

    2014-11-01

    Ten years have passed since a serial block-face scanning electron microscopy (SBF-SEM) method was developed [1]. In this innovative method, samples were automatically sectioned with an ultramicrotome placed inside a scanning electron microscope column, and the block surfaces were imaged one after another by SEM to capture back-scattered electrons. The contrast-inverted images obtained by the SBF-SEM were very similar to those acquired using conventional TEM. SFB-SEM has made easy to acquire image stacks of the transmission electron microscopy (TEM) in the mesoscale, which is taken with the confocal laser-scanning microcopy(CF-LSM).Furthermore, serial-section SEM has been combined with the focused ion beam (FIB) milling method [2]. FIB-incorporated SEM (FIB-SEM) has enabled the acquisition of three-dimensional images with a higher z-axis resolution com- pared to ultramicrotome-equipped SEM.We tried immunocytochemistry for FIB-SEM and correlated this immunoreactivity with that in CF-LSM. Dendrites of neurons in the rat neostriatum were visualized using a recombinant viral vector. Moreover, the thalamostriatal afferent terminals were immunolabeled with Cy5 fluorescence for vesicular glutamate transporter 2 (VGluT2). After detection of the sites of terminals apposed to the dendrites by using CF-LSM, GFP and VGluT2 immunoreactivities were further developed for EM by using immunogold/silver enhancement and immunoperoxidase/diaminobenzidine (DAB) methods, respectively.We showed that conventional immuno-cytochemical staining for TEM was applicable to FIB-SEM. Furthermore, several synaptic contacts, which were thought to exist on the basis of CF-LSM findings, were confirmed with FIB-SEM, revealing the usefulness of the combined method of CF-LSM and FIB-SEM.

  19. Low axial drift stage and temperature controlled liquid cell for z-scan fluorescence correlation spectroscopy in an inverted confocal geometry.

    Science.gov (United States)

    Allgeyer, Edward S; Sterling, Sarah M; Neivandt, David J; Mason, Michael D

    2011-05-01

    A recent iteration of fluorescence correlation spectroscopy (FCS), z-scan FCS, has drawn attention for its elegant solution to the problem of quantitative sample positioning when investigating two-dimensional systems while simultaneously providing an excellent method for extracting calibration-free diffusion coefficients. Unfortunately, the measurement of planar systems using (FCS and) z-scan FCS still requires extremely mechanically stable sample positioning, relative to a microscope objective. As axial sample position serves as the inherent length calibration, instabilities in sample position will affect measured diffusion coefficients. Here, we detail the design and function of a highly stable and mechanically simple inverted microscope stage that includes a temperature controlled liquid cell. The stage and sample cell are ideally suited to planar membrane investigations, but generally amenable to any quantitative microscopy that requires low drift and excellent axial and lateral stability. In the present work we evaluate the performance of our custom stage system and compare it with the stock microscope stage and typical sample sealing and holding methods.

  20. Low axial drift stage and temperature controlled liquid cell for z-scan fluorescence correlation spectroscopy in an inverted confocal geometry

    Energy Technology Data Exchange (ETDEWEB)

    Allgeyer, Edward S. [Department of Physics and Astronomy, University of Maine, Orono, Maine 04469 (United States); Sterling, Sarah M. [Graduate School of Biomedical Sciences, University of Maine, Orono, Maine 04469 (United States); Department of Chemical and Biological Engineering, University of Maine, Orono, Maine 04469 (United States); Neivandt, David J. [Graduate School of Biomedical Sciences, University of Maine, Orono, Maine 04469 (United States); Department of Chemical and Biological Engineering, University of Maine, Orono, Maine 04469 (United States); Institute for Molecular Biophysics, Orono, Maine 04469 (United States); Mason, Michael D. [Department of Chemical and Biological Engineering, University of Maine, Orono, Maine 04469 (United States); Institute for Molecular Biophysics, Orono, Maine 04469 (United States)

    2011-05-15

    A recent iteration of fluorescence correlation spectroscopy (FCS), z-scan FCS, has drawn attention for its elegant solution to the problem of quantitative sample positioning when investigating two-dimensional systems while simultaneously providing an excellent method for extracting calibration-free diffusion coefficients. Unfortunately, the measurement of planar systems using (FCS and) z-scan FCS still requires extremely mechanically stable sample positioning, relative to a microscope objective. As axial sample position serves as the inherent length calibration, instabilities in sample position will affect measured diffusion coefficients. Here, we detail the design and function of a highly stable and mechanically simple inverted microscope stage that includes a temperature controlled liquid cell. The stage and sample cell are ideally suited to planar membrane investigations, but generally amenable to any quantitative microscopy that requires low drift and excellent axial and lateral stability. In the present work we evaluate the performance of our custom stage system and compare it with the stock microscope stage and typical sample sealing and holding methods.

  1. Depth profiling of SBS/PET layered materials using step-scan phase modulation Fourier transform infrared photoacoustic spectroscopy and two-dimensional correlation analysis

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    This paper demonstrates the application of step-scan phase modulation Fourier transform infrared photoacoustic spectroscopy(FTIR-PAS) in non-destructively depth profiling of styrene-butadiene-styrene block copolymer/polyethylene terephthalate(SBS/PET) layered materials.The surface thicknesses of three layered samples were determined to be 1.2,4.3 and 9.4μm by using phase difference analysis,overcoming the spatial detection limits of FTIR.Combined with generalized two-dimensional(G2D) FTIR correlation analysis,the spatial origins of peaks in the SBS/PET spectrum are identified with those having overlapping peaks between different layers are resolved.

  2. 婴儿晚发性维生素K缺乏并颅内出血的CT诊断(附23例分析)%Clinical CT analysis of 23 infants with delayed vitamin K deficiency and intracranial hemorrhage

    Institute of Scientific and Technical Information of China (English)

    林新杰; 董学萍; 任玉琴; 纪丽莉

    2001-01-01

    目的:探讨晚发性维生素K(Vit k)缺乏症并颅内出血的发病机制及CT表现,提高CT检查对本病价值的认识。方法:分析了23例临床资料完整,确诊晚发性Vit K缺乏症并颅内出血的临床CT表现。结果:蛛网膜下腔出血16例,硬膜下出血14例,脑内出血11例,脑室内出血4例。结论:CT是Vit K缺乏症并颅内出血的首选检查方法,对临床制定综合治疗计划,估计预后提供可靠依据。%Objecbive:To study the mechanism and CT features of delayed vitamin K deficiency with intracranial hemorrhage,to show the diagnostic value of CT scan to the disease. Methods:Analyzing the clinical CT features of 23 infants with delayed vitamin K deficiency and intracranial hemorrhage. Results: 16 cases with subarachnoid hemorrhage, 14 with subdural hemorrhage,11 with intracerebral hemorrhage, 4 with ventricular hemorrhage. Conclusion:CT scan should be the first reliable choice of accessory examinations for making general plan of treatment to the disease.

  3. Imaging lobular breast carcinoma: comparison of synchrotron radiation DEI-CT technique with clinical CT, mammography and histology

    Science.gov (United States)

    Fiedler, S.; Bravin, A.; Keyriläinen, J.; Fernández, M.; Suortti, P.; Thomlinson, W.; Tenhunen, M.; Virkkunen, P.; Karjalainen-Lindsberg, M.-L.

    2004-01-01

    Different modalities for imaging cancer-bearing breast tissue samples are described and compared. The images include clinical mammograms and computed tomography (CT) images, CT images with partly coherent synchrotron radiation (SR), and CT and radiography images taken with SR using the diffraction enhanced imaging (DEI) method. The images are evaluated by a radiologist and compared with histopathological examination of the samples. Two cases of lobular carcinoma are studied in detail. The indications of cancer are very weak or invisible in the conventional images, but the morphological changes due to invasion of cancer become pronounced in the images taken by the DEI method. The strands penetrating adipose tissue are seen clearly in the DEI-CT images, and the histopathology confirms that some strands contain the so-called 'Indian file' formations of cancer cells. The radiation dose is carefully measured for each of the imaging modalities. The mean glandular dose (MGD) for 50% glandular breast tissue is about 1 mGy in conventional mammography and less than 0.25 mGy in projection DEI, while in the clinical CT imaging the MGD is very high, about 45 mGy. The entrance dose of 95 mGy in DEI-CT imaging gives rise to an MGD of 40 mGy, but the dose may be reduced by an order of magnitude, because the contrast is very large in most images.

  4. Correlation Between Quadrant Specific Automatic Visual Field Defect and Retinal Nerve Fiber Layer Thickness as Measured by Scanning Laser Polarimetry in Patients With Primary Open Angle Glaucoma

    Directory of Open Access Journals (Sweden)

    Yo-Chen Chang

    2008-05-01

    Full Text Available The purpose of this study was to correlate quadrant specific Humphrey visual field mean deviation (MD with retinal nerve fiber layer (RNFL thickness as measured by scanning laser polarimetry (GDx, and to determine whether there is a difference in the correlation with visual field defect between the Asian normative database provided by GDx (GDx database and our native normative database (KMU database. In an age-matched study, a control group of 240 normal eyes underwent GDx. Another 60 eyes with visual field defect due to primary angle glaucoma underwent autoperimetry and GDx examination. First, we compared four GDx measurements between the control and study groups. Next, we divided the visual field into four quadrants (superior, inferior, temporal, nasal and calculated the MD of each quadrant. We correlated the MD of superior, inferior and overall visual field with RNFL thickness judged by two databases (the GDx Asian internal normative database and the database from our control group. GDx detected abnormal RNFL thickness significantly more accurately when using the KMU database (p = 0.0473 for superior quadrant; p = 0.0074 for inferior quadrant; p = 0.0011 for average thickness than when using the GDx database. There was no significant difference in the specificity between these two databases. The normal ranges in the GDx internal normative database for Asians are too wide. By using our own GDx normative database, the correlations with MD of autoperimetry were significantly improved. We suggest that every laboratory and clinic establish its own normative database of GDx in Asia.

  5. A study of respiration-correlated cone-beam CT scans to correct target positioning errors in radiotherapy of thoracic cancer

    Science.gov (United States)

    Santoro, J. P.; McNamara, J.; Yorke, E.; Pham, H.; Rimner, A.; Rosenzweig, K. E.; Mageras, G. S.

    2012-01-01

    Purpose: There is increasingly widespread usage of cone-beam CT (CBCT) for guiding radiation treatment in advanced-stage lung tumors, but difficulties associated with daily CBCT in conventionally fractionated treatments include imaging dose to the patient, increased workload and longer treatment times. Respiration-correlated cone-beam CT (RC-CBCT) can improve localization accuracy in mobile lung tumors, but further increases the time and workload for conventionally fractionated treatments. This study investigates whether RC-CBCT-guided correction of systematic tumor deviations in standard fractionated lung tumor radiation treatments is more effective than 2D image-based correction of skeletal deviations alone. A second study goal compares respiration-correlated vs respiration-averaged images for determining tumor deviations. Methods: Eleven stage II–IV nonsmall cell lung cancer patients are enrolled in an IRB-approved prospective off-line protocol using RC-CBCT guidance to correct for systematic errors in GTV position. Patients receive a respiration-correlated planning CT (RCCT) at simulation, daily kilovoltage RC-CBCT scans during the first week of treatment and weekly scans thereafter. Four types of correction methods are compared: (1) systematic error in gross tumor volume (GTV) position, (2) systematic error in skeletal anatomy, (3) daily skeletal corrections, and (4) weekly skeletal corrections. The comparison is in terms of weighted average of the residual GTV deviations measured from the RC-CBCT scans and representing the estimated residual deviation over the treatment course. In the second study goal, GTV deviations computed from matching RCCT and RC-CBCT are compared to deviations computed from matching respiration-averaged images consisting of a CBCT reconstructed using all projections and an average-intensity-projection CT computed from the RCCT. Results: Of the eleven patients in the GTV-based systematic correction protocol, two required no correction

  6. Nuclear Scans

    Science.gov (United States)

    Nuclear scans use radioactive substances to see structures and functions inside your body. They use a special ... images. Most scans take 20 to 45 minutes. Nuclear scans can help doctors diagnose many conditions, including ...

  7. Rheumatoid arthritis-associated interstitial lung disease: lung inflammation evaluated with high resolution computed tomography scan is correlated to rheumatoid arthritis disease activity.

    Science.gov (United States)

    Pérez-Dórame, Renzo; Mejía, Mayra; Mateos-Toledo, Heidegger; Rojas-Serrano, Jorge

    2015-01-01

    To describe the association between rheumatoid arthritis disease activity (RA) and interstitial lung damage (inflammation and fibrosis), in a group of patients with rheumatoid arthritis-associated interstitial lung disease (RA-ILD). A retrospective study of RA patients with interstitial lung disease (restrictive pattern in lung function tests and evidence of interstitial lung disease in high resolution computed tomography (HRCT)). Patients were evaluated to exclude other causes of pulmonary disease. RA disease activity was measured with the CDAI index. Interstitial lung inflammation and fibrosis were determined by Kazerooni scale. We compared Kazerooni ground-glass score with the nearest CDAI score to HRCT date scan of the first medical evaluation at our institution. In nine patients, we compared the first ground-glass score with a second one after treatment with DMARDs and corticosteroids. Spearman's rank correlation coefficient was used to evaluate association between RA disease activity and the Kazerooni ground-glass and fibrosis scores. Thirty-four patients were included. A positive correlation between CDAI and ground-glass scores was found (rs=0.3767, PFibrosis and CDAI scores were not associated (rs=-0.0747, P<0.6745). After treatment, a downward tendency in the ground-glass score was observed (median [IQR]): (2.33 [2,3] vs. 2 [1.33-2.16]), P<0.056, along with a lesser CDAI score (27 [8-43] vs. 9 [5-12]), P<0.063. There is a correlation between RA disease activity and ground-glass appearance in the HRCT of RA-ILD patients. These results suggest a positive association between RA disease activity and lung inflammation in RA-ILD. Copyright © 2013 Elsevier España, S.L.U. All rights reserved.

  8. Does Dopplersignal enhancement with Levovist improve the diagnostic confidence of duplex scanning of the iliac arteries?--(A pilot study with correlation to intravascular ultrasound)

    DEFF Research Database (Denmark)

    Vogt, K C; Jensen, F; Schroeder, T V

    1998-01-01

    To evaluate whether echo-enhancement with Levovist improves the diagnostic confidence of duplex scanning of the iliac arteries.......To evaluate whether echo-enhancement with Levovist improves the diagnostic confidence of duplex scanning of the iliac arteries....

  9. Correlative two-photon and serial block face scanning electron microscopy in neuronal tissue using 3D near-infrared branding maps.

    Science.gov (United States)

    Lees, Robert M; Peddie, Christopher J; Collinson, Lucy M; Ashby, Michael C; Verkade, Paul

    2017-01-01

    Linking cellular structure and function has always been a key goal of microscopy, but obtaining high resolution spatial and temporal information from the same specimen is a fundamental challenge. Two-photon (2P) microscopy allows imaging deep inside intact tissue, bringing great insight into the structural and functional dynamics of cells in their physiological environment. At the nanoscale, the complex ultrastructure of a cell's environment in tissue can be reconstructed in three dimensions (3D) using serial block face scanning electron microscopy (SBF-SEM). This provides a snapshot of high resolution structural information pertaining to the shape, organization, and localization of multiple subcellular structures at the same time. The pairing of these two imaging modalities in the same specimen provides key information to relate cellular dynamics to the ultrastructural environment. Until recently, approaches to relocate a region of interest (ROI) in tissue from 2P microscopy for SBF-SEM have been inefficient or unreliable. However, near-infrared branding (NIRB) overcomes this by using the laser from a multiphoton microscope to create fiducial markers for accurate correlation of 2P and electron microscopy (EM) imaging volumes. The process is quick and can be user defined for each sample. Here, to increase the efficiency of ROI relocation, multiple NIRB marks are used in 3D to target ultramicrotomy. A workflow is described and discussed to obtain a data set for 3D correlated light and electron microscopy, using three different preparations of brain tissue as examples. Copyright © 2017 Elsevier Inc. All rights reserved.

  10. Nanometer scale correlation of optical and structural properties of individual InGaN/GaN nanorods by scanning transmission electron microscope cathodoluminescence

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, Marcus; Schmidt, Gordon; Veit, Peter; Petzold, Silke; Bertram, Frank; Christen, Juergen [Institute of Experimental Physics, Otto-von-Guericke-University Magdeburg (Germany); Albert, Steven; Bengoechea-Encabo, Ana Maria; Sanchez-Garcia, Miguel Angel; Calleja, Enrique [ISOM e Departamento de Ingenieria Electronica, Universidad Politecnica de Madrid (Spain)

    2013-07-01

    A potential benefit of nanorods as light emitters, aside from their very high crystal quality, relies on better light extraction efficiency as compared to thin films, because of the high surface to volume ratio. In this study we present a direct nano-scale correlation of the optical properties with the actual crystalline structure of ordered InGaN/GaN nanorods using low temperature cathodoluminescence spectroscopy in a scanning transmission electron microscope (STEM-CL). Direct comparison of the high-angle annular dark field image with the simultaneously recorded panchromatic CL mapping at 15 K reveals a weak luminescence from the bottom GaN layer. We observe the highest CL intensity in the middle of the InGaN region. The spectral position of the InGaN emission shifts continuously red from the GaN/InGaN interface (λ=409 nm) to the NR top (λ=446 nm) due to lattice pulling effects and InGaN partial decomposition. Additionally, optical active basal stacking faults in the GaN layer emitting at 366 nm can be found.

  11. In Depth Analyses of LEDs by a Combination of X-ray Computed Tomography (CT) and Light Microscopy (LM) Correlated with Scanning Electron Microscopy (SEM).

    Science.gov (United States)

    Meyer, Jörg; Thomas, Christian; Tappe, Frank; Ogbazghi, Tekie

    2016-06-16

    In failure analysis, device characterization and reverse engineering of light emitting diodes (LEDs), and similar electronic components of micro-characterization, plays an important role. Commonly, different techniques like X-ray computed tomography (CT), light microscopy (LM) and scanning electron microscopy (SEM) are used separately. Similarly, the results have to be treated for each technique independently. Here a comprehensive study is shown which demonstrates the potentials leveraged by linking CT, LM and SEM. In depth characterization is performed on a white emitting LED, which can be operated throughout all characterization steps. Major advantages are: planned preparation of defined cross sections, correlation of optical properties to structural and compositional information, as well as reliable identification of different functional regions. This results from the breadth of information available from identical regions of interest (ROIs): polarization contrast, bright and dark-field LM images, as well as optical images of the LED cross section in operation. This is supplemented by SEM imaging techniques and micro-analysis using energy dispersive X-ray spectroscopy.

  12. 3D mechanical analysis of aeronautical plain bearings: Validation of a finite element model from measurement of displacement fields by digital volume correlation and optical scanning tomography

    Science.gov (United States)

    Germaneau, A.; Peyruseigt, F.; Mistou, S.; Doumalin, P.; Dupré, J.-C.

    2010-06-01

    On Airbus aircraft, spherical plain bearings are used on many components; in particular to link engine to pylon or pylon to wing. Design of bearings is based on contact pressure distribution on spherical surfaces. To determine this distribution, a 3D analysis of the mechanical behaviour of aeronautical plain bearing is presented in this paper. A numerical model has been built and validated from a comparison with 3D experimental measurements of kinematic components. For that, digital volume correlation (DVC) coupled with optical scanning tomography (OST) is employed to study the mechanical response of a plain bearing model made in epoxy resin. Experimental results have been compared with the ones obtained from the simulated model. This comparison enables us to study the influence of various boundary conditions to build the FE model. Some factors have been highlighted like the fitting behaviour which can radically change contact pressure distribution. This work shows the contribution of a representative mechanical environment to study precisely mechanical response of aeronautical plain bearings.

  13. Correlation between resistance-change effect in transition-metal oxides and secondary-electron contrast of scanning electron microscope images

    Energy Technology Data Exchange (ETDEWEB)

    Kinoshita, K.; Kishida, S. [Department of Information and Electronics, Graduate School of Engineering, Tottori University, 4-101 Koyama-Minami, Tottori 680-8552 (Japan); Tottori University Electronic Display Research Center, 522-2 Koyama-Kita, Tottori 680-0941 (Japan); Yoda, T. [Department of Information and Electronics, Graduate School of Engineering, Tottori University, 4-101 Koyama-Minami, Tottori 680-8552 (Japan)

    2011-09-15

    Conductive atomic-force microscopy (C-AFM) writing is attracting attention as a technique for clarifying the switching mechanism of resistive random-access memory by providing a wide area filled with filaments, which can be regarded as one filament with large radius. The writing area on a nickel-oxide (NiO) film formed by conductive atomic-force microscopy was observed by scanning electron microscope, and a correlation between the contrast in a secondary-electron image (SEI) and the resistance written by C-AFM was revealed. In addition, the dependence of the SEI contrast on the beam accelerating voltage (V{sub accel}) suggests that the resistance-change effect occurs near the surface of the NiO film. As for the effects of electron irradiation and vacuum annealing on the C-AFM writing area, it was shown that the resistance-change effect is caused by exchange of oxygen with the atmosphere at the surface of the NiO film. This result suggests that the low-resistance and high-resistance areas are, respectively, p-type Ni{sub 1+{delta}}O ({delta} < 0) and insulating (stoichiometric) or n-type Ni{sub 1+{delta}}O ({delta}{>=} 0).

  14. Full-field linear and nonlinear measurements using Continuous-Scan Laser Doppler Vibrometry and high speed Three-Dimensional Digital Image Correlation

    Science.gov (United States)

    Ehrhardt, David A.; Allen, Matthew S.; Yang, Shifei; Beberniss, Timothy J.

    2017-03-01

    Spatially detailed dynamic measurements of thin, lightweight structures can be difficult to obtain due to the structure's low mass and complicated deformations under certain loading conditions. If traditional contacting sensors, such as accelerometers, strain gauges, displacement transducers, etc., are used, the total number of measurement locations available is limited by the weight added and the effect each sensor has on the local stiffness of the contact area. Other non-contacting sensors, such as Laser Doppler Vibrometers (LDV), laser triangulation sensors, proximity sensors, etc., do not affect the dynamics of a structure, but are limited to single point measurements. In contrast, a few recently developed non-contacting measurement techniques have been shown to be capable of simultaneously measuring the response over a wide measurement field. Two techniques are considered here: Continuous-Scan Laser Doppler Vibrometry (CSLDV) and high speed Three-Dimensional Digital Image Correlation (3D DIC). With the use of these techniques, unprecedented measurement resolution can be achieved. In this work, the linear and nonlinear deformations of a clamped, nominally flat beam and plate under steady state sinusoidal loading will be measured using both techniques. In order to assess their relative merits, the linear natural frequencies, mode shapes, and nonlinear deformation shapes measured with each method are compared. Both measurement systems give comparable results in many cases, although 3D DIC is more accurate for spatially complex deformations at large amplitudes and CSLDV is more accurate at low amplitudes and when the spatial deformation pattern is simpler.

  15. Significance of calcific valvular heart disease in /sup 99m/Tc pyrophosphate myocardial infarction scanning: radiographic, scintigraphic, and pathological correlation

    Energy Technology Data Exchange (ETDEWEB)

    Jengo, J.A.; Mena, I.; Joe, S.H.; Criley, J.M.

    1977-08-01

    Technetium-99m pyrophosphate (PP/sub i/) is currently considered the best scanning agent for the diagnosis of acute myocardial infarction. False-positive scans have been reported in association with unstable angina, alcoholic cardiomyopathy, and ventricular aneurysms. In this study, 86 percent of patients (12/14) with either calcific aortic or mitral valvular heart disease had positive PP/sub i/ cardiac scintiscans and the location of the PP/sub i/ uptake was limited to the calcific valve in all (9/9) of the patients who underwent valve replacement surgery. Six patients with valvular disease without radiologic evidence of calcium had negative PP/sub i/ heart images. Three of these patients had surgical valve replacement, and in none was there increased uptake in the resected valve. Seventy-five percent of the patients with calcified aortic valves had localization of the PP/sub i/ activity to the area of the aortic valve, whereas 50 percent of the patients with calcified mitral valves showed a diffuse pattern of uptake on the cardiac image. In vitro demonstration of increased radioactivity in surgically removed cardiac valves warrants the conclusion that Tc-99m PP/sub i/ is taken up by calcified heart valves. We conclude that while PP/sub i/ heart scanning is a sensitive indicator of acute myocardial infarction, false-positive scans can occur in the presence of calcific valvular disease, due to localization of PP/sub i/ in the calcified portion of the valve.

  16. MRI Scans

    Science.gov (United States)

    Magnetic resonance imaging (MRI) uses a large magnet and radio waves to look at organs and structures inside your body. Health care professionals use MRI scans to diagnose a variety of conditions, from ...

  17. Lung Texture in Serial Thoracic Computed Tomography Scans: Correlation of Radiomics-based Features With Radiation Therapy Dose and Radiation Pneumonitis Development

    Energy Technology Data Exchange (ETDEWEB)

    Cunliffe, Alexandra; Armato, Samuel G. [Department of Radiology, The University of Chicago, Chicago, Illinois (United States); Castillo, Richard [Department of Radiation Oncology, The University of Texas Medical Branch, Galveston, Texas (United States); Pham, Ngoc [Baylor College of Medicine, Houston, Texas (United States); Guerrero, Thomas [Department of Radiation Oncology, The University of Texas MD Anderson Cancer Center, Houston, Texas (United States); Al-Hallaq, Hania A., E-mail: hal-hallaq@radonc.uchicago.edu [Department of Radiation and Cellular Oncology, The University of Chicago, Chicago, Illinois (United States)

    2015-04-01

    Purpose: To assess the relationship between radiation dose and change in a set of mathematical intensity- and texture-based features and to determine the ability of texture analysis to identify patients who develop radiation pneumonitis (RP). Methods and Materials: A total of 106 patients who received radiation therapy (RT) for esophageal cancer were retrospectively identified under institutional review board approval. For each patient, diagnostic computed tomography (CT) scans were acquired before (0-168 days) and after (5-120 days) RT, and a treatment planning CT scan with an associated dose map was obtained. 32- × 32-pixel regions of interest (ROIs) were randomly identified in the lungs of each pre-RT scan. ROIs were subsequently mapped to the post-RT scan and the planning scan dose map by using deformable image registration. The changes in 20 feature values (ΔFV) between pre- and post-RT scan ROIs were calculated. Regression modeling and analysis of variance were used to test the relationships between ΔFV, mean ROI dose, and development of grade ≥2 RP. Area under the receiver operating characteristic curve (AUC) was calculated to determine each feature's ability to distinguish between patients with and those without RP. A classifier was constructed to determine whether 2- or 3-feature combinations could improve RP distinction. Results: For all 20 features, a significant ΔFV was observed with increasing radiation dose. Twelve features changed significantly for patients with RP. Individual texture features could discriminate between patients with and those without RP with moderate performance (AUCs from 0.49 to 0.78). Using multiple features in a classifier, AUC increased significantly (0.59-0.84). Conclusions: A relationship between dose and change in a set of image-based features was observed. For 12 features, ΔFV was significantly related to RP development. This study demonstrated the ability of radiomics to provide a quantitative, individualized

  18. Educational Review of Predictive Value and Findings of Computed Tomography Scan in Diagnosing Bowel and Mesenteric Injuries After Blunt Trauma: Correlation With Trauma Surgery Findings in 163 Patients.

    Science.gov (United States)

    Cinquantini, Francesco; Tugnoli, Gregorio; Piccinini, Alice; Coniglio, Carlo; Mannone, Sergio; Biscardi, Andrea; Gordini, Giovanni; Di Saverio, Salomone

    2017-08-01

    Laparotomy can detect bowel and mesenteric injuries in 1.2%-5% of patients following blunt abdominal trauma. Delayed diagnosis in such cases is strongly related to increased risk of ongoing sepsis, with subsequent higher morbidity and mortality. Computed tomography (CT) scanning is the gold standard in the evaluation of blunt abdominal trauma, being accurate in the diagnosis of bowel and mesenteric injuries in case of hemodynamically stable trauma patients. Aims of the present study are to 1) review the correlation between CT signs and intraoperative findings in case of bowel and mesenteric injuries following blunt abdominal trauma, analysing the correlation between radiological features and intraoperative findings from our experience on 25 trauma patients with small bowel and mesenteric injuries (SBMI); 2) identify the diagnostic specificity of those signs found at CT with practical considerations on the following clinical management; and 3) distinguish the bowel and mesenteric injuries requiring immediate surgical intervention from those amenable to initial nonoperative management. Between January 1, 2008, and May 31, 2010, 163 patients required laparotomy following blunt abdominal trauma. Among them, 25 patients presented bowel or mesenteric injuries. Data were analysed retrospectively, correlating operative surgical reports with the preoperative CT findings. We are presenting a pictorial review of significant and frequent findings of bowel and mesenteric lesions at CT scan, confirmed intraoperatively at laparotomy. Moreover, the predictive value of CT scan for SBMI is assessed. Multidetector CT scan is the gold standard in the assessment of intra-abdominal blunt abdominal trauma for not only parenchymal organs injuries but also detecting SBMI; in the presence of specific signs it provides an accurate assessment of hollow viscus injuries, helping the trauma surgeons to choose the correct initial clinical management. Copyright © 2016 Canadian Association of

  19. Scan Statistics

    CERN Document Server

    Glaz, Joseph

    2009-01-01

    Suitable for graduate students and researchers in applied probability and statistics, as well as for scientists in biology, computer science, pharmaceutical science and medicine, this title brings together a collection of chapters illustrating the depth and diversity of theory, methods and applications in the area of scan statistics.

  20. Inspection of chemically roughened copper surfaces using optical interferometry and scanning electron microscopy: Establishing a correlation between surface morphology and solderability

    Energy Technology Data Exchange (ETDEWEB)

    Stevenson, J.O.; Hosking, F.M.; Guilinger, T.R.; Yost, F.G.; Sorensen, N.R.

    1995-08-01

    Sandia National Laboratories has established a Cooperative Research and Development Agreement with consortium members of the National Center for Manufacturing Sciences (NCMS) to develop fundamental generic technology in printed wiring board materials and surface finishes. We are investigating the effects of surface roughness on the wettability and solderability behavior of several types of copper board finishes to gain insight into surface morphologies that lead to improved solderability. In this paper, we present optical interterometry and scanning electron microscopy results for a variety of chemically-etched copper substrates. Initial testing on six chemical etches demonstrate that surface roughness can be greatly enhanced through chemical etching. Noticeable movements in solder wettability were observed to company increases in roughness.

  1. Correlating whisker growth and grain structure on Sn-Cu samples by real-time scanning electron microscopy and backscattering diffraction characterization

    Energy Technology Data Exchange (ETDEWEB)

    Pei Fei; Jadhav, Nitin; Chason, Eric [School of Engineering, Brown University, Providence, Rhode Island 02912 (United States)

    2012-05-28

    Whiskers/hillocks grow out of Pb-free Sn coatings used in electronics manufacturing. To determine which grains form whiskers/hillocks, we use scanning electron microscopy and backscattering diffraction to simultaneously monitor the surface morphology and grain structure. To reduce surface roughness, we developed a ''peel-off'' method to prepare ultra-flat samples that were measured repeatedly while whiskers/hillocks formed. We find grains that form into whiskers/hillocks are present in the as-deposited film (i.e., not re-nucleated) and many have horizontal grain boundaries beneath them. Grain rotation during whisker/hillock formation means that measurements performed after the features grow do not indicate their initial grain orientations.

  2. Extraction of 3D Femur Neck Trabecular Bone Architecture from Clinical CT Images in Osteoporotic Evaluation: a Novel Framework.

    Science.gov (United States)

    Sapthagirivasan, V; Anburajan, M; Janarthanam, S

    2015-08-01

    The early detection of osteoporosis risk enhances the lifespan and quality of life of an individual. A reasonable in-vivo assessment of trabecular bone strength at the proximal femur helps to evaluate the fracture risk and henceforth, to understand the associated structural dynamics on occurrence of osteoporosis. The main aim of our study was to develop a framework to automatically determine the trabecular bone strength from clinical femur CT images and thereby to estimate its correlation with BMD. All the 50 studied south Indian female subjects aged 30 to 80 years underwent CT and DXA measurements at right femur region. Initially, the original CT slices were intensified and active contour model was utilised for the extraction of the neck region. After processing through a novel process called trabecular enrichment approach (TEA), the three dimensional (3D) trabecular features were extracted. The extracted 3D trabecular features, such as volume fraction (VF), solidity of delta points (SDP) and boundness, demonstrated a significant correlation with femoral neck bone mineral density (r = 0.551, r = 0.432, r = 0.552 respectively) at p TEA method would be useful for spotting women vulnerable to osteoporotic risk.

  3. Head CT scan

    Science.gov (United States)

    Brain CT; Cranial CT; CT scan - skull; CT scan - head; CT scan - orbits; CT scan - sinuses; Computed tomography - cranial; CAT scan - brain ... hold your breath for short periods. A complete scan usually take only 30 seconds to a few ...

  4. Dopant Diffusion and Activation in Silicon Nanowires Fabricated by ex Situ Doping: A Correlative Study via Atom-Probe Tomography and Scanning Tunneling Spectroscopy.

    Science.gov (United States)

    Sun, Zhiyuan; Hazut, Ori; Huang, Bo-Chao; Chiu, Ya-Ping; Chang, Chia-Seng; Yerushalmi, Roie; Lauhon, Lincoln J; Seidman, David N

    2016-07-13

    Dopants play a critical role in modulating the electric properties of semiconducting materials, ranging from bulk to nanoscale semiconductors, nanowires, and quantum dots. The application of traditional doping methods developed for bulk materials involves additional considerations for nanoscale semiconductors because of the influence of surfaces and stochastic fluctuations, which may become significant at the nanometer-scale level. Monolayer doping is an ex situ doping method that permits the post growth doping of nanowires. Herein, using atom-probe tomography (APT) with subnanometer spatial resolution and atomic-ppm detection limit, we study the distributions of boron and phosphorus in ex situ doped silicon nanowires with accurate control. A highly phosphorus doped outer region and a uniformly boron doped interior are observed, which are not predicted by criteria based on bulk silicon. These phenomena are explained by fast interfacial diffusion of phosphorus and enhanced bulk diffusion of boron, respectively. The APT results are compared with scanning tunneling spectroscopy data, which yields information concerning the electrically active dopants. Overall, comparing the information obtained by the two methods permits us to evaluate the diffusivities of each different dopant type at the nanowire oxide, interface, and core regions. The combined data sets permit us to evaluate the electrical activation and compensation of the dopants in different regions of the nanowires and understand the details that lead to the sharp p-i-n junctions formed across the nanowire for the ex situ doping process.

  5. Correlation of {sup 18}F-FDG Avid Volumes on Pre–Radiation Therapy and Post–Radiation Therapy FDG PET Scans in Recurrent Lung Cancer

    Energy Technology Data Exchange (ETDEWEB)

    Shusharina, Nadya, E-mail: nshusharina@partners.org; Cho, Joseph; Sharp, Gregory C.; Choi, Noah C.

    2014-05-01

    Purpose: To investigate the spatial correlation between high uptake regions of 2-deoxy-2-[{sup 18}F]-fluoro-D-glucose positron emission tomography ({sup 18}F-FDG PET) before and after therapy in recurrent lung cancer. Methods and Materials: We enrolled 106 patients with inoperable lung cancer into a prospective study whose primary objectives were to determine first, the earliest time point when the maximum decrease in FDG uptake representing the maximum metabolic response (MMR) is attainable and second, the optimum cutoff value of MMR based on its predicted tumor control probability, sensitivity, and specificity. Of those patients, 61 completed the required 4 serial {sup 18}F-FDG PET examinations after therapy. Nineteen of 61 patients experienced local recurrence at the primary tumor and underwent analysis. The volumes of interest (VOI) on pretherapy FDG-PET were defined by use of an isocontour at ≥50% of maximum standard uptake value (SUV{sub max}) (≥50% of SUV{sub max}) with correction for heterogeneity. The VOI on posttherapy images were defined at ≥80% of SUV{sub max}. The VOI of pretherapy and posttherapy {sup 18}F-FDG PET images were correlated for the extent of overlap. Results: The size of VOI at pretherapy images was on average 25.7% (range, 8.8%-56.3%) of the pretherapy primary gross tumor volume (GTV), and their overlap fractions were 0.8 (95% confidence interval [CI]: 0.7-0.9), 0.63 (95% CI: 0.49-0.77), and 0.38 (95% CI: 0.19-0.57) of VOI of posttherapy FDG PET images at 10 days, 3 months, and 6 months, respectively. The residual uptake originated from the pretherapy VOI in 15 of 17 cases. Conclusions: VOI defined by the SUV{sub max}-≥50% isocontour may be a biological target volume for escalated radiation dose.

  6. Linear models for airborne-laser-scanning-based operational forest inventory with small field sample size and highly correlated LiDAR data

    Science.gov (United States)

    Junttila, Virpi; Kauranne, Tuomo; Finley, Andrew O.; Bradford, John B.

    2015-01-01

    Modern operational forest inventory often uses remotely sensed data that cover the whole inventory area to produce spatially explicit estimates of forest properties through statistical models. The data obtained by airborne light detection and ranging (LiDAR) correlate well with many forest inventory variables, such as the tree height, the timber volume, and the biomass. To construct an accurate model over thousands of hectares, LiDAR data must be supplemented with several hundred field sample measurements of forest inventory variables. This can be costly and time consuming. Different LiDAR-data-based and spatial-data-based sampling designs can reduce the number of field sample plots needed. However, problems arising from the features of the LiDAR data, such as a large number of predictors compared with the sample size (overfitting) or a strong correlation among predictors (multicollinearity), may decrease the accuracy and precision of the estimates and predictions. To overcome these problems, a Bayesian linear model with the singular value decomposition of predictors, combined with regularization, is proposed. The model performance in predicting different forest inventory variables is verified in ten inventory areas from two continents, where the number of field sample plots is reduced using different sampling designs. The results show that, with an appropriate field plot selection strategy and the proposed linear model, the total relative error of the predicted forest inventory variables is only 5%–15% larger using 50 field sample plots than the error of a linear model estimated with several hundred field sample plots when we sum up the error due to both the model noise variance and the model’s lack of fit.

  7. Scanning micro-sclerometer

    Science.gov (United States)

    Oliver, Warren C.; Blau, Peter J.

    1994-01-01

    A scanning micro-sclerometer measures changes in contact stiffness and correlates these changes to characteristics of a scratch. A known force is applied to a contact junction between two bodies and a technique employing an oscillating force is used to generate the contact stiffness between the two bodies. As the two bodies slide relative to each other, the contact stiffness changes. The change is measured to characterize the scratch.

  8. Thyroid Scan and Uptake

    Science.gov (United States)

    ... News Physician Resources Professions Site Index A-Z Thyroid Scan and Uptake Thyroid scan and uptake uses ... the Thyroid Scan and Uptake? What is a Thyroid Scan and Uptake? A thyroid scan is a ...

  9. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... News Physician Resources Professions Site Index A-Z Thyroid Scan and Uptake Thyroid scan and uptake uses ... the Thyroid Scan and Uptake? What is a Thyroid Scan and Uptake? A thyroid scan is a ...

  10. Thyroid Scan and Uptake

    Science.gov (United States)

    ... Physician Resources Professions Site Index A-Z Thyroid Scan and Uptake Thyroid scan and uptake uses small ... Thyroid Scan and Uptake? What is a Thyroid Scan and Uptake? A thyroid scan is a type ...

  11. Depth Profiling of SBS/PET Layered Materials Using Step-Scan Phase Modulation FTIR-PAS with G2D Correlation Analysis%Depth Profiling of SBS/PET Layered Materials Using Step-Scan Phase Modulation FTIR-PAS with G2D Correlation Analysis

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Step-scan phase modulation FTIR-photoacoustic spectroscopy (PAS) provides a way to study the depth profile of layered materials and has been described elsewhere. Thermal diffusion length was kept identical through phase modulation in the whole wavenumber region. Phase rotation method is used in depth profile of SBS/PET layered samples and the spectral information of any depth can be obtained.

  12. Helix Scan: A Scan Design for Diagnosis

    Institute of Scientific and Technical Information of China (English)

    WANG Fei; HU Yu; LI Xiaowei

    2007-01-01

    Scan design is a widely used design-for-testability technique to improve test quality and efficiency. For the scan-designed circuit, test and diagnosis of the scan chain and the circuit is an important process for silicon debug and yield learning. However, conventional scan designs and diagnosis methods abort the subsequent diagnosis process after diagnosing the scan chain if the scan chain is faulty. In this work, we propose a design-for-diagnosis scan strategy called helix scan and a diagnosis algorithm to address this issue. Unlike previous proposed methods, helix scan has the capability to carry on the diagnosis process without losing information when the scan chain is faulty. What is more, it simplifies scan chain diagnosis and achieves high diagnostic resolution as well as accuracy. Experimental results demonstrate the effectiveness of our design.

  13. Lumbar spine CT scan

    Science.gov (United States)

    CAT scan - lumbar spine; Computed axial tomography scan - lumbar spine; Computed tomography scan - lumbar spine; CT - lower back ... your breath for short periods of time. The scan should take only 10 to 15 minutes.

  14. Speckle analysis in laser scanning display system

    Institute of Scientific and Technical Information of China (English)

    Hong Chang; Wei Huang; Fugui Yang; Hai Ming; Jianping Xie

    2009-01-01

    The theory of speckle formation in laser scanning display system is established based on the averaging effect of eye response as laser beam scanning through an eye resolution spot.It is analyzed that speckle reduction can be obtained by averaging states of speckle during scanning.The theoretical results show that a smaller correlation length of screen surface and the narrowing of laser beam in scanning direction can reduce speckle contrast for this system.

  15. Depiction of Nidi and Fibrovascular Zones of Osteoid Ostemas Using Gamma Correction Tc 99m HDP Pinhole Bone Scan and Conventional Radiograph, and Correlation with CT, MRI, and PVC Phantom Imaging

    Energy Technology Data Exchange (ETDEWEB)

    Bahk, Youg Whee [Sung Ae Hospital, Seoul (Korea, Republic of); Kim, Sung Hoon; Chung, Yong An; Bahk, Won Jong; Park, Jung Mee; Kang, You Mee; Choi, Woo Hee; Park, Young Ha; Sohn, Hyung Sun; Kim, Byung Ki; Chung, Soo Kyo [The Catholic Univ. of Korea, Seoul (Korea, Republic of)

    2011-03-15

    For the precise imaging diagnosis of osteoid osteoma (OO), the identification of the nidus and fibrovascular zone (FVZ) is essential. However, the latter sign has received little attention because it is difficult to demonstrate. We applied the recently introduced gamma correction (GC) to depict the FVZ on pinhole bone scan (PBS), conventional radiography (CR), and computed tomography (CT). Non gamma correction MRI was also analyzed for reference. Ten patients with histologically proven diagnoses of OO were enrolled in this retrospective study. PBS, CR, and CT were processed by GC to demonstrate the nidi and FVZ as distinct yet integrating components of OO. PBS was performed using a 4mm pinhole collimator 3 h after iv injection of 925 to 1, 110 MBq (25 to 30mCi) of Tc 99m HDP, and anteroposterior and mediolateral CR and transverse CT were taken according to the standard technique. MRI sequences included T1 and T2 weighted images. For gamma correction, we utilized the Photo Correction Wizard program of ACD Photo Editor v3. 1. A team of three qualified nuclear physician radiologists, two nuclear physicians, and one MRI specialist read bone scans, radiographs, and MRIs of OO according to each specialty, and orthopaedic aspects and histology were reviewed by one qualified orthopedic surgeon and two qualified pathologists, respectively. Each observer first read the images separately with basic information about the aim of the study given and then in concert. Interpretive disagreement was settled by discussion and consensus. On pinhole scan, nidi were presented as areas of intense tracer uptake in all cases, and, importantly after GC, a thin ring like zone with lower tracer uptake became visible in seven out of ten cases. GCCR also revealed a thin lucent zone that circumscribed the nidi in six out of ten cases and GCCT in two of four cases. MRI, without GC, presented nidi with high signal in the center and a thin ring like zone with low signal in the periphery in five out

  16. Lung gallium scan

    Science.gov (United States)

    Gallium 67 lung scan; Lung scan; Gallium scan - lung; Scan - lung ... Gallium is injected into a vein. The scan will be taken 6 to 24 hours after the gallium is injected. (Test time depends on whether your condition is acute or chronic .) ...

  17. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... limitations of the Thyroid Scan and Uptake? What is a Thyroid Scan and Uptake? A thyroid scan ... tissues in your body. top of page How is the procedure performed? Nuclear medicine imaging is usually ...

  18. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... of the Thyroid Scan and Uptake? What is a Thyroid Scan and Uptake? A thyroid scan is ... code: Phone no: Thank you! Do you have a personal story about radiology? Share your patient story ...

  19. Heart PET scan

    Science.gov (United States)

    ... nuclear medicine scan; Heart positron emission tomography; Myocardial PET scan ... A PET scan requires a small amount of radioactive material (tracer). This tracer is given through a vein (IV), ...

  20. Correlation of 18F-FDG PET/CT findings with histopathological results in differentiated thyroid cancer patients who have increased thyroglobulin or antithyroglobulin antibody levels and negative 131I whole-body scan results.

    Science.gov (United States)

    Ozkan, Elgin; Aras, Gulseren; Kucuk, N Ozlem

    2013-05-01

    This study aimed to investigate the correlation of 18F-FDG PET/CT findings with histopathological results in defining the recurrence of the disease in patients with differentiated thyroid cancer (DTC) who have increased thyroglobuline (Tg) or anti-Tg antibody (TgAb) levels and negative 131I whole-body scan (WBS) result. A total of 59 patients with DTC (44 women, 15 men; mean [SD] age, 48.2 [22.6] years) were included in the study. All of the patients had previous papillary thyroid cancer, and all of them had undergone radioiodine ablation after a total or near-total thyroidectomy. After radioiodine ablation, patients were followed up for approximately 2.5 years. In the follow-up, the patients with negative 131I-WBS results and increased Tg or TgAb levels under thyroid-stimulating hormone-stimulated conditions underwent an 18F-FDG PET/CT scan to determine any recurrence of disease. There were negative or uncertain findings in the neck ultrasonography and/or thorax CT in most of the patients. The 18F-FDG PET/CT findings were compared with the histopathological results in all patients. Although 49 patients had increased Tg levels, the remaining 10 patients had increased TgAb levels. In patients with high Tg levels, 18F-FDG PET/CT scan results were negative in 10 and positive in 39 patients. In this patient group, 18F-FDG PET/CT findings were true positive, true negative, false positive, and false negative in 32, 3, 7, and 7 patients, respectively. The sensitivity, specificity, positive predictive value, negative predictive value and accuracy of 18F-FDG PET/CT in this group were calculated as 82%, 30%, 80%, 30%, and 71%, separately. In the receiver operating characteristic analysis, a 4.5 cutoff SUV(max) was calculated with 75% sensitivity and 70% specificity for predicting disease recurrence. Cutoff Tg level was calculated as 20.7 ng/mL with 75% sensitivity and 55% specificity. In 10 patients with high TgAb levels, 18F-FDG PET/CT was true positive, true negative and

  1. Scan BIST with biased scan test signals

    Institute of Scientific and Technical Information of China (English)

    XIANG Dong; CHEN MingJing; SUN JiaGuang

    2008-01-01

    The conventional test-per-scan built-in self-test (BIST) scheme needs a number of shift cycles followed by one capture cycle.Fault effects received by the scan flip-flops are shifted out while shifting in the next test vector like scan testing.Unlike deterministic testing,it is unnecessary to apply a complete test vector to the scan chains.A new scan-based BIST scheme is proposed by properly controlling the test signals of the scan chains,Different biased random values are assigned to the test signals of scan flip-flops in separate scan chains.Capture cycles can be inserted at any clock cycle if necessary.A new testability estimation procedure according to the proposed testing scheme is presented.A greedy procedure is proposed to select a weight for each scan chain.Experimental results show that the proposed method can improve test effectiveness of scan-based BIST greatly,and most circuits can obtain complete fault coverage or very close to complete fault coverage.

  2. 胸部CT扫描参数与组织噪声相关性的实验研究%Experiment study of correlation between CT scan parameters and noise of different tissues

    Institute of Scientific and Technical Information of China (English)

    赵峰; 曾勇明; 彭盛坤; 彭刚; 郁仁强; 谭欢; 刘潇; 王杰

    2012-01-01

    Objective:To investigate the correlations between CT scan parameters and noises of different tissues and to discuss the factors influencing the image quality. Methods: The anthropomorphic phantom equivalent to human tissue was scanned by 16 slices spiral scanner(GE BrightSpeed) with different voltages(80,100,120 kV and 140 kV),tube currents(80,100,120,180,240 mA and 300 mA) and pitches(0.562,0.938,1.375 and 1.75). 120 kV,300 mA and 0.938(pitch) were using as the standard. One of the three scanning parameters was changed and other scanning parameters were fixed. The CT value and image noise were recorded and analyzed (Standard derivation,SD). Results:There was no statistical difference in noises of the lung among groups of 80,100,120,140 kV(F=0.966,/>>0.05). There were statistical differences between groups of 80 kV and 120 kV in noises of the chest wall,soft tissue of spine and aorta,P0.05; chest wall F=1.53,P>0.05;soft tissue of spine F=2.27,P>0.05). There were statistical differences in noises of aorta among groups with different pitches, F=9.68,P<0.05. Conclusions:The noises of different tissues are increasing with the decrease of tube voltage,tube current and increase of pitch,but the increase of noise in the lung is not obviously. The chest scan with low dose can reduce the radiation dose and keep the image quality without obviously increasing the noise in the lung.%目的:探讨胸部CT扫描参数变化与不同组织噪声的相关性及图像质量影响的规律.方法:应用GE BrightSpeed 16层CT机以管电压120 kV,管电流300 mA,螺距0.938为标准,每次扫描改变一种扫描参数,其它扫描参数不变,以不同管电压(80、100、120、140 kV)、管电流(80、100、120、180、240、300 mA)及螺距(0.562、0.938、1.375、1.75)扫描仿真胸部体模,测量、记录体模不同组织噪声值(CT值标准差,SD),并进行统计学分析.结果:肺组织不同管电压组(80、100、120、140 kV)的噪声比较差异无统计学意义(F=0

  3. 胸部低剂量CT定量指标与肺气流受限的相关性分析%Correlation between the parameters quantified by chest low-dose CT scan and airflow limitation examined by spirometry

    Institute of Scientific and Technical Information of China (English)

    陈淑靖; 白春学; 顾宇彤; 张静; 余勇夫; 计海婴; 王桂芳; 李丽; 龚颖; 陈刚

    2012-01-01

    目的 探讨胸部低剂量CT(LDCT)定量指标和肺气流受限及其严重程度的相关性,建立初步相关模型.方法 纳入2008年7月至2012年2月在我院同步完成LDCT和肺功能检查的48例40岁以上有吸烟史的患者,对LDCT定量指标和肺功能指标进行相关性分析,并结合年龄、性别等因素建立回归模型.通过绘制受试者工作特征曲线(ROC曲线)确定对气流受限的判断作用最佳的LDCT定量指标.结果 经调整年龄、性别及BMI校正后,EV和El与FEV1、FEV1% pred、FEV1/FVC和TLC% pred呈负相关(P<0.05).但与RV/TLC% pred则无明显相关性(P>0.05);确定最佳回归模型为FEV1/FVC%=94.17+25.31×性别(gender)-0.58×年龄(age)-l0.84×In(El(%));FEV1% pred=141.76-0.78×年龄(age)-14.07×In(EI(%)).经ROC曲线确定对气流受限的判断作用最佳的LDCT定量指标为El.结论 El可用于判别有无气流受限,通过回归方程计算可估测气流受限和肺气肿严重程度.LDCT有望用于COPD的早期诊断.%Objective The purpose of the current study was to deternmine the correlation between the parameters quantified by chest low-dose CT scan (LDCT) and airflow limitation examined by spirometry.Methods This study included 48 patients above 40 years old and with smoking history who underwent LDCT and spirometry on the same day.The regression model was generated on the base of the LDCT value which correlated best to airflow limitation using ROC curve.Results With age,gender and body mass index adjusted,EV and El significantly correlated negatively with FEV1,FEV1%predieted,FEV1/FVC and TLC% predicted (P<0.05),but had no correlation with RV/TLC% predicted ( P>0.05).The regression model were FEV1/FVC%=94.17+25.31 X<gender-0.58×age-10.84×In (EI (%)),FEV1%predicted=141.76-0.78×age-14.07×In (EI(%)).The best LDCT value for airflow limitation estimation was EI.Conclusions El may be used to estimate whether airflow limitation exited and to

  4. Conventional cerebrospinal fluid scanning

    Energy Technology Data Exchange (ETDEWEB)

    Schicha, H.

    1985-06-01

    Conventional cerebrospinal fluid scanning (CSF scanning) today is mainly carried out in addition to computerized tomography to obtain information about liquor flow kinetics. Especially in patients with communicating obstructive hydrocephalus, CSF scanning is clinically useful for the decision for shunt surgery. In patients with intracranial cysts, CSF scanning can provide information about liquor circulation. Further indications for CSF scanning include the assessment of shunt patency especially in children, as well as the detection and localization of cerebrospinal fluid leaks.

  5. MIBG scans in patients with stage 4 neuroblastoma reveal two metastatic patterns, one is associated with MYCN amplification and in MYCN-amplified tumours correlates with a better prognosis

    Energy Technology Data Exchange (ETDEWEB)

    Bleeker, Gitta [Academic Medical Centre/Emma Children' s Hospital, Department of Paediatric Oncology, Amsterdam (Netherlands); Academic Medical Centre, Department of Oncogenomics, Amsterdam (Netherlands); Eck-Smit, Berthe L. van [Academic Medical Centre, Department of Nuclear Medicine, Amsterdam (Netherlands); Zwinderman, Koos H. [Academic Medical Centre, Department of Biostatistics, Amsterdam (Netherlands); Versteeg, Rogier [Academic Medical Centre, Department of Oncogenomics, Amsterdam (Netherlands); Noesel, Max M. van [Erasmus Medical Centre/Sophia Children' s Hospital, Department of Paediatric Oncology/Haematology, Rotterdam (Netherlands); Kam, Boen L. [Erasmus Medical Centre, Department of Nuclear Medicine, Rotterdam (Netherlands); Kaspers, Gertjan J. [VU University Medical Centre, Department of Paediatric Oncology, Amsterdam (Netherlands); Schie, Annelies van [VU University Medical Centre, Department of Nuclear Medicine, Amsterdam (Netherlands); Kreissman, Susan G. [Duke University Medical Centre, Durham, NC (United States); University of Florida, Children' s Oncology Group (COG), Gainesville, FL (United States); Yanik, Gregory [University of Florida, Children' s Oncology Group (COG), Gainesville, FL (United States); University of Michigan, Department of Paediatrics, Division of Haematology and Oncology, Ann Arbor, MI (United States); Hero, Barbara [University Hospital of Cologne, Children' s Hospital, Cologne (Germany); Schmidt, Matthias [University Hospital of Cologne, Department of Nuclear Medicine, Cologne (Germany); Laureys, Genevieve [Ghent University Hospital, Department of Paediatric Haematology and Oncology, Ghent (Belgium); Lambert, Bieke [Ghent University Hospital, Department of Nuclear Medicine, Ghent (Belgium); Oera, Ingrid [Academic Medical Centre, Department of Oncogenomics, Amsterdam (Netherlands); Lund University Hospital, Department of Paediatric Oncology, Lund (Sweden); Schulte, Johannes H. [University Children' s Hospital Essen, Essen (Germany); Caron, Huib N.; Tytgat, Godelieve A. [Academic Medical Centre/Emma Children' s Hospital, Department of Paediatric Oncology, Amsterdam (Netherlands); Dutch Childhood Oncology Group (DCOG), The Hague (Netherlands)

    2014-09-30

    The aim of this study was to find clinically relevant MIBG-avid metastatic patterns in patients with newly diagnosed stage 4 neuroblastoma. Diagnostic {sup 123}I-MIBG scans from 249 patients (123 from a European and 126 from the COG cohort) were assessed for metastatic spread in 14 body segments and the form of the lesions: ''focal'' (clear margins distinguishable from adjacent background) or ''diffuse'' (indistinct margins, dispersed throughout the body segment). The total numbers of diffuse and focal lesions were recorded. Patients were then categorized as having lesions exclusively focal, lesions more focal than diffuse, lesions more diffuse than focal, or lesions exclusively diffuse. Diffuse lesions affected a median of seven body segments and focal lesions a median of two body segments (P < 0.001, both cohorts). Patients with a focal pattern had a median of 2 affected body segments and those with a diffuse pattern a median of 11 affected body segments (P < 0.001, both cohorts). Thus, two MIBG-avid metastatic patterns emerged: ''limited-focal'' and ''extensive-diffuse''. The median numbers of affected body segments in MYCN-amplified (MNA) tumours were 5 (European cohort) and 4 (COG cohort) compared to 9 and 11, respectively, in single-copy MYCN (MYCNsc) tumours (P < 0.001). Patients with exclusively focal metastases were more likely to have a MNA tumour (60 % and 70 %, respectively) than patients with the other types of metastases (23 % and 28 %, respectively; P < 0.001). In a multivariate Cox regression analysis, focal metastases were associated with a better event-free and overall survival than the other types of metastases in patients with MNA tumours in the COG cohort (P < 0.01). Two metastatic patterns were found: a ''limited and focal'' pattern found mainly in patients with MNA neuroblastoma that correlated with prognosis, and an ''extensive and

  6. Line scanning, stage scanning confocal microscope (LSSSCM).

    Science.gov (United States)

    Gareau, Daniel S; Krueger, James G; Hawkes, Jason E; Lish, Samantha R; Dietz, Michael P; Mülberger, Alba Guembe; Mu, Euphemia W; Stevenson, Mary L; Lewin, Jesse M; Meehan, Shane A; Carucci, John A

    2017-08-01

    For rapid pathological assessment of large surgical tissue excisions with cellular resolution, we present a line scanning, stage scanning confocal microscope (LSSSCM). LSSSCM uses no scanning mirrors. Laser light is focused with a single cylindrical lens to a line of diffraction-limited width directly into the (Z) sample focal plane, which is parallel to and near the flattened specimen surface. Semi-confocal optical sections are derived from the linear array distribution (Y) and a single mechanical drive that moves the sample parallel to the focal plane and perpendicular to the focused line (X). LSSSCM demonstrates cellular resolution in the conditions of high nuclear density within micronodular basal cell carcinoma.

  7. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... interfere with the procedure. You will receive specific instructions based on the type of scan you are ... after your nuclear medicine scan. If any special instructions are necessary, you will be informed by a ...

  8. RBC nuclear scan

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/article/003835.htm RBC nuclear scan To use the sharing features on this page, please enable JavaScript. An RBC nuclear scan uses small amounts of radioactive material to ...

  9. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... of the Thyroid Scan and Uptake? What is a Thyroid Scan and Uptake? A thyroid scan is ... encourage linking to this site. × Recommend RadiologyInfo to a friend Send to (friend's e-mail address): From ( ...

  10. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... of the Thyroid Scan and Uptake? What is a Thyroid Scan and Uptake? A thyroid scan is ... encourage linking to this site. × Recommend RadiologyInfo to a friend Send to (friend's e-mail address): From ( ...

  11. Pulmonary ventilation/perfusion scan

    Science.gov (United States)

    V/Q scan; Ventilation/perfusion scan; Lung ventilation/perfusion scan ... A pulmonary ventilation/perfusion scan is actually two tests. They may be done separately or together. During the perfusion scan, a health care provider injects ...

  12. Correlation between Charge State of Insulating NaCl Surfaces and Ionic Mobility Induced by Water Adsorption: A Combined Ambient Pressure X-ray Photoelectron Spectroscopy and Scanning Force Microscopy Study

    Energy Technology Data Exchange (ETDEWEB)

    Verdaguer, Albert; Jose Segura, Juan; Fraxedas, Jordi; Bluhm, Hendrik; Salmeron, Miquel

    2008-09-03

    In situ ambient pressure X-ray photoelectron spectroscopy (APPES) and scanning force microscopy were used to characterize the surface discharge induced by water layers grown on (001) surfaces of sodium chloride single crystals. The APPES studies show that both kinetic energy (KE) and full width at half-maximum (FWHM) of the Na 2s and Cl 2p core level peaks, monitored as a function of relative humidity (RH), mimic surface conductivity curves measured using scanning force microscopy. The KE position and FWHM of the core level peaks therefore are directly related to the solvation and diffusion of ions at the NaCl(100) surface upon adsorption of water.

  13. Interesting bone scans - unusual findings

    Energy Technology Data Exchange (ETDEWEB)

    Dobson, M.; Wadhwa, S.S.; Mansberg, R.; Fernandes, V.B. [Wollongong Hospital, Wollongong, NSW (Australia)

    1997-12-01

    A 59-year-old female with carcinoma of the colon and known liver metastatic disease was referred for bone scan to evaluate for bone metastases. Although no bone metastases were found, there was abnormal uptake noted in the liver corresponding to a metastatic calcified lesion. The only other findings were of degenerative disease in the cervical spine, right shoulder and small joints of the hands. A 69-year-old male with carcinoma of the prostate and right side low back pain was referred for bone scan. No focal abnormalities to suggest metastatic disease were identified; findings within the cervical spine, lumber spine and knees were presumed secondary to degenerative disease. Intermittent pain persisted and the patient was referred for a repeat bone scan six months later. Previous scan findings of degenerative disease and no metastatic disease were confirmed; however, closer inspection revealed an enlarged right kidney with significant retention of tracer in the pelvicalyceal system suggesting possible obstruction. A Retrograde pyelogram was performed, and no obvious obstruction demonstrated. As bone scan findings were very suggestive of obstruction, a DTPA scan with lasix was performed showing a dilated right collecting system with no functional obstruction. Given the degree of dilation, it is possible that the patient experiences intermittent PUJ obstruction causing his symptoms. A 33-year-old male with insulin dependent diabetes mellitus and viral arthritis was referred for a bone scan. A three phase revealed increased uptake in the region of the knee and leR proximal tibia. Delayed whole body images revealed multiple focal areas of osteoblastic activity in the leR tibia. Abnormal uptake was also seen in the upper third of the leR femur. The remainder of the skeletal survey was normal. X-ray correlation of the leR tibia and femoral findings was undertaken. Combinating unilateral changes on bone scan and X-ray although very suggestive of sclerotic polyostotic

  14. Radionucleotide scanning in osteomyelitis

    Energy Technology Data Exchange (ETDEWEB)

    Sachs, W.; Kanat, I.O.

    1986-07-01

    Radionucleotide bone scanning can be an excellent adjunct to the standard radiograph and clinical findings in the diagnosis of osteomyelitis. Bone scans have the ability to detect osteomyelitis far in advance of the standard radiograph. The sequential use of technetium and gallium has been useful in differentiating cellulitis and osteomyelitis. Serial scanning with technetium and gallium may be used to monitor the response of osteomyelitis to antibiotic therapy.

  15. Laser Scanning in Forests

    OpenAIRE

    Håkan Olsson; Juha Hyyppä; Markus Holopainen

    2012-01-01

    The introduction of Airborne Laser Scanning (ALS) to forests has been revolutionary during the last decade. This development was facilitated by combining earlier ranging lidar discoveries [1–5], with experience obtained from full-waveform ranging radar [6,7] to new airborne laser scanning systems which had components such as a GNSS receiver (Global Navigation Satellite System), IMU (Inertial Measurement Unit) and a scanning mechanism. Since the first commercial ALS in 1994, new ALS-based fore...

  16. The value of {sup 99m}Tc-HDP scan in the diagnosis of tibial avascular necrosis caused by thermal injury: a case with multi-image correlation analysis

    Energy Technology Data Exchange (ETDEWEB)

    Bahk, Yong Whee [Sung-Ae General Hospital, Seoul (Korea, Republic of)

    2007-10-15

    Basic pathology in thermal injury is coagulative soft tissue necorsis that may occasionally be complicated by infection and later by scarring and vascular changes. Radiological features were discussed in detail by Resnick. The early changes consist of soft tissue defect, porosis and periostitis and the late changes include osteophytosis, periarticular calcification or ossification and arthropathy with ankylosis. Acromutilation can occur when small bones of the hand and foot are burned and scarred. This communication describes {sup 99m}Tc-HDP pnhole bone scan manifestations of thermal bone injuries observed in a case of skin-bone burns of the mid-tibial shaft that was complicated by infection, soft tissue scarring and osteonecrosis. Patient was a 49-year-old female thermal burn involving a mid-tibial shaft segment along with overlying skin. The injury was accidental to medullary rimming to fit intramedullary nail to fix fracture. The heat produced during drilling spread to burn the pretibial skin that is sparse in subcutaneous buffer tissue and vessels. The soft tissue burn was infected and healed by repeated skin grafts and scar over a period of 2 years. Concomitantly, the underlying bone was infected locally and treated but ensued in osteonecrosis that was accompanied by osteolysis. Indeed. pinhole {sup 99m}Tc-HDP scan played a unique role in this case in detecting that live lateral cortex had sustained the large dead bone that involved the main volume of the mid-tibial shaft. Importantly, the scan could confirm live cortex to have sustained dead bone uncollapsed. Anatomical and metabolic data gained from bone scanning prompted us to systematically scrutinize radiograph and CT to specifically identify the preserved lateral cortex. As mentioned the existence of healthy cortex is biomechanically and tactically vital to surgically replace and restore the devitalized bone.

  17. Bone scanning in otolaryngology.

    Science.gov (United States)

    Noyek, A M

    1979-09-01

    Modern radionuclide bone scanning has introduced a new concept in physiologic and anatomic diagnostic imaging to general medicine. As otolaryngologists must diagnose and treat disease in relation to the bony and/or cartilaginous supporting structures of the neurocranium and upper airway, this modality should be included in the otolaryngologist's diagnostic armamentarium. It is the purpose of this manuscript to study the specific applications of bone scanning to our specialty at this time, based on clinical experience over the past three years. This thesis describes the development of bone scanning in general (history of nuclear medicine and nuclear physics; history of bone scanning in particular). General concepts in nuclear medicine are then presented; these include a discussion of nuclear semantics, principles of radioactive emmissions, the properties 99mTc as a radionuclide, and the tracer principle. On the basis of these general concepts, specific concepts in bone scanning are then brought forth. The physiology of bone and the action of the bone scan agents is presented. Further discussion considers the availability and production of the bone scan agent, patient factors, the gamma camera, the triphasic bone scan and the ultimate diagnostic principle of the bone scan. Clinical applications of bone scanning in otolaryngology are then presented in three sections. Proven areas of application include the evaluation of malignant tumors of the head and neck, the diagnosis of temporomandibular joint disorders, the diagnosis of facial fractures, the evaluation of osteomyelitis, nuclear medicine imaging of the larynx, and the assessment of systemic disease. Areas of adjunctive or supplementary value are also noted, such as diagnostic imaging of meningioma. Finally, areas of marginal value in the application of bone scanning are described.

  18. Frequency scanning microstrip antennas

    DEFF Research Database (Denmark)

    Danielsen, Magnus; Jørgensen, Rolf

    1979-01-01

    The principles of using radiating microstrip resonators as elements in a frequency scanning antenna array are described. The resonators are cascade-coupled. This gives a scan of the main lobe due to the phase-shift in the resonator in addition to that created by the transmission line phase...

  19. Scanning laser Doppler vibrometry

    DEFF Research Database (Denmark)

    Brøns, Marie; Thomsen, Jon Juel

    With a Scanning Laser Doppler Vibrometer (SLDV) a vibrating surface is automatically scanned over predefined grid points, and data processed for displaying vibration properties like mode shapes, natural frequencies, damping ratios, and operational deflection shapes. Our SLDV – a PSV-500H from...

  20. LIDAR COMBINED SCANNING UNIT

    Directory of Open Access Journals (Sweden)

    V. V. Elizarov

    2016-11-01

    Full Text Available Subject of Research. The results of lidar combined scanning unit development for locating leaks of hydrocarbons are presented The unit enables to perform high-speed scanning of the investigated space in wide and narrow angle fields. Method. Scanning in a wide angular field is produced by one-line scanning path by means of the movable aluminum mirror with a frequency of 20Hz and amplitude of 20 degrees of swing. Narrowband scanning is performed along a spiral path by the deflector. The deflection of the beam is done by rotation of the optical wedges forming part of the deflector at an angle of ±50. The control function of the scanning node is performed by a specialized software product written in C# programming language. Main Results. This scanning unit allows scanning the investigated area at a distance of 50-100 m with spatial resolution at the level of 3 cm. The positioning accuracy of the laser beam in space is 15'. The developed scanning unit gives the possibility to browse the entire investigated area for the time not more than 1 ms at a rotation frequency of each wedge from 50 to 200 Hz. The problem of unambiguous definition of the beam geographical coordinates in space is solved at the software level according to the rotation angles of the mirrors and optical wedges. Lidar system coordinates are determined by means of GPS. Practical Relevance. Development results open the possibility for increasing the spatial resolution of scanning systems of a wide range of lidars and can provide high positioning accuracy of the laser beam in space.

  1. Combining generative and discriminative models for semantic segmentation of CT scans via active learning.

    Science.gov (United States)

    Iglesias, Juan Eugenio; Konukoglu, Ender; Montillo, Albert; Tu, Zhuowen; Criminisi, Antonio

    2011-01-01

    This paper presents a new supervised learning framework for the efficient recognition and segmentation of anatomical structures in 3D computed tomography (CT), with as little training data as possible. Training supervised classifiers to recognize organs within CT scans requires a large number of manually delineated exemplar 3D images, which are very expensive to obtain. In this study, we borrow ideas from the field of active learning to optimally select a minimum subset of such images that yields accurate anatomy segmentation. The main contribution of this work is in designing a combined generative-discriminative model which: i) drives optimal selection of training data; and ii) increases segmentation accuracy. The optimal training set is constructed by finding unlabeled scans which maximize the disagreement between our two complementary probabilistic models, as measured by a modified version of the Jensen-Shannon divergence. Our algorithm is assessed on a database of 196 labeled clinical CT scans with high variability in resolution, anatomy, pathologies, etc. Quantitative evaluation shows that, compared with randomly selecting the scans to annotate, our method decreases the number of training images by up to 45%. Moreover, our generative model of body shape substantially increases segmentation accuracy when compared to either using the discriminative model alone or a generic smoothness prior (e.g. via a Markov Random Field).

  2. Laser Scanning in Forests

    Directory of Open Access Journals (Sweden)

    Håkan Olsson

    2012-09-01

    Full Text Available The introduction of Airborne Laser Scanning (ALS to forests has been revolutionary during the last decade. This development was facilitated by combining earlier ranging lidar discoveries [1–5], with experience obtained from full-waveform ranging radar [6,7] to new airborne laser scanning systems which had components such as a GNSS receiver (Global Navigation Satellite System, IMU (Inertial Measurement Unit and a scanning mechanism. Since the first commercial ALS in 1994, new ALS-based forest inventory approaches have been reported feasible for operational activities [8–12]. ALS is currently operationally applied for stand level forest inventories, for example, in Nordic countries. In Finland alone, the adoption of ALS for forest data collection has led to an annual savings of around 20 M€/year, and the work is mainly done by companies instead of governmental organizations. In spite of the long implementation times and there being a limited tradition of making changes in the forest sector, laser scanning was commercially and operationally applied after about only one decade of research. When analyzing high-ranked journal papers from ISI Web of Science, the topic of laser scanning of forests has been the driving force for the whole laser scanning research society over the last decade. Thus, the topic “laser scanning in forests” has provided a significant industrial, societal and scientific impact. [...

  3. Resonant scanning mechanism

    Science.gov (United States)

    Wallace, John; Newman, Mike; Gutierrez, Homero; Hoffman, Charlie; Quakenbush, Tim; Waldeck, Dan; Leone, Christopher; Ostaszewski, Miro

    2014-10-01

    Ball Aerospace & Technologies Corp. developed a Resonant Scanning Mechanism (RSM) capable of combining a 250- Hz resonant scan about one axis with a two-hertz triangular scan about the orthogonal axis. The RSM enables a rapid, high-density scan over a significant field of regard (FOR) while minimizing size, weight, and power requirements. The azimuth scan axis is bearing mounted allowing for 30° of mechanical travel, while the resonant elevation axis is flexure and spring mounted with five degrees of mechanical travel. Pointing-knowledge error during quiescent static pointing at room temperature across the full range is better than 100 μrad RMS per axis. The compact design of the RSM, roughly the size of a soda can, makes it an ideal mechanism for use on low-altitude aircraft and unmanned aerial vehicles. Unique aspects of the opto-mechanical design include i) resonant springs which allow for a high-frequency scan axis with low power consumption; and ii) an independent lower-frequency scan axis allowing for a wide FOR. The pointing control system operates each axis independently and employs i) a position loop for the azimuth axis; and ii) a unique combination of parallel frequency and amplitude control loops for the elevation axis. All control and pointing algorithms are hosted on a 200-MHz microcontroller with 516 KB of RAM on a compact 3"×4" digital controller, also of Ball design.

  4. CT scan of choristoma

    Energy Technology Data Exchange (ETDEWEB)

    Moriki, A.; Morimoto, M.; Sada, Y.; Kurisaka, M.; Mori, K.

    1987-02-01

    Choristoma is a rare tumor that occurs in the pituitary gland. The case presented here is a 44-year-old male. A plain CT scan demonstrated a slight high-density mass near the posterior clinoid of the sella turcica, while a moderate and homogeneous enhancing effect and a clear borderline were shown by an enhanced CT scan. A cornal CT scan study showed that the tumor extended from the intrasellar to the suprasellar region. The diagnosis of choristoma was made by means of histology.

  5. A fluorescence scanning electron microscope

    Directory of Open Access Journals (Sweden)

    Takaaki Kanemaru

    2010-01-01

    Full Text Available Fluorescence techniques are widely used in biological research to examine molecular localization, while electron microscopy can provide unique ultrastructural information. To date, correlative images from both fluorescence and electron microscopy have been obtained separately using two different instruments, i.e. a fluorescence microscope (FM and an electron microscope (EM. In the current study, a scanning electron microscope (SEM (JEOL JXA8600 M was combined with a fluorescence digital camera microscope unit and this hybrid instrument was named a fluorescence SEM (FL-SEM. In the labeling of FL-SEM samples, both Fluolid, which is an organic EL dye, and Alexa Fluor, were employed. We successfully demonstrated that the FL-SEM is a simple and practical tool for correlative fluorescence and electron microscopy.

  6. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... Uptake? A thyroid scan is a type of nuclear medicine imaging. The radioactive iodine uptake test (RAIU) ... of thyroid function, but does not involve imaging. Nuclear medicine is a branch of medical imaging that ...

  7. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... which are encased in metal and plastic and most often shaped like a box, attached to a ... will I experience during and after the procedure? Most thyroid scan and thyroid uptake procedures are painless. ...

  8. The conical scan radiometer

    Science.gov (United States)

    Prosch, T.; Hennings, D.

    1982-07-01

    A satellite-borne conical scan radiometer (CSR) is proposed, offering multiangular and multispectral measurements of Earth radiation fields, including the total radiances, which are not available from conventional radiometers. Advantages of the CSR for meteorological studies are discussed. In comparison to conventional cross track scanning instruments, the CSR is unique with respect to the selected picture element size which is kept constant by means of a specially shaped detector matrix at all scan angles. The conical scan mode offers the chance to improve angular sampling. Angular sampling gaps of previous satellite-borne radiometers can be interpolated and complemented by CSR data. Radiances are measured through 10 radiometric channels which are selected to study cloudiness, water vapor, ozone, surface albedo, ground and mean stratospheric temperature, and aerosols.

  9. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... scan and uptake uses small amounts of radioactive materials called radiotracers, a special camera and a computer ... last two months that used iodine-based contrast material. Your doctor will instruct you on how to ...

  10. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... of page What are some common uses of the procedure? The thyroid scan is used to determine ... you are undergoing. top of page What does the equipment look like? Special camera or imaging devices ...

  11. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... Uptake? A thyroid scan is a type of nuclear medicine imaging. The radioactive iodine uptake test (RAIU) ... of thyroid function, but does not involve imaging. Nuclear medicine is a branch of medical imaging that ...

  12. Pediatric CT Scans

    Science.gov (United States)

    The Radiation Epidemiology Branch and collaborators have initiated a retrospective cohort study to evaluate the relationship between radiation exposure from CT scans conducted during childhood and adolescence and the subsequent development of cancer.

  13. Shoulder MRI scan

    Science.gov (United States)

    ... finding on an x-ray or bone scan Shoulder pain and fever Decreased motion of the shoulder joint ... of the shoulder joint Shoulder instability Shoulder weakness Shoulder pain and a history of cancer Shoulder pain that ...

  14. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... a computer to provide information about your thyroid’s size, shape, position and function that is often unattainable ... The thyroid scan is used to determine the size, shape and position of the thyroid gland. The ...

  15. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... as an overactive thyroid gland, a condition called hyperthyroidism , cancer or other growths assess the nature of ... an x-ray or CT scan, surgeries or treatments using iodinated contrast material within the last two ...

  16. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... eat for several hours before your exam because eating can affect the accuracy of the uptake measurement. ... often unattainable using other imaging procedures. For many diseases, nuclear medicine scans yield the most useful information ...

  17. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... regulates the rate at which the body converts food to energy. top of page What are some ... often unattainable using other imaging procedures. For many diseases, nuclear medicine scans yield the most useful information ...

  18. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... called hyperthyroidism , cancer or other growths assess the nature of a nodule discovered in the gland detect ... CT scan, surgeries or treatments using iodinated contrast material within the last two months. are taking medications ...

  19. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... are noninvasive and, with the exception of intravenous injections, are usually painless medical tests that help physicians ... before the scan. The radiotracer given by intravenous injection is usually given up to 30 minutes prior ...

  20. Scanning Auger Electron Microscope

    Data.gov (United States)

    Federal Laboratory Consortium — A JEOL model 7830F field emission source, scanning Auger microscope. Specifications / Capabilities: Ultra-high vacuum (UHV), electron gun range from 0.1 kV to 25 kV,...

  1. Photothermal imaging scanning microscopy

    Science.gov (United States)

    Chinn, Diane; Stolz, Christopher J.; Wu, Zhouling; Huber, Robert; Weinzapfel, Carolyn

    2006-07-11

    Photothermal Imaging Scanning Microscopy produces a rapid, thermal-based, non-destructive characterization apparatus. Also, a photothermal characterization method of surface and subsurface features includes micron and nanoscale spatial resolution of meter-sized optical materials.

  2. Scanning Auger Electron Microscope

    Data.gov (United States)

    Federal Laboratory Consortium — A JEOL model 7830F field emission source, scanning Auger microscope.Specifications / Capabilities:Ultra-high vacuum (UHV), electron gun range from 0.1 kV to 25 kV,...

  3. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... A thyroid scan is a type of nuclear medicine imaging. The radioactive iodine uptake test (RAIU) is ... thyroid function, but does not involve imaging. Nuclear medicine is a branch of medical imaging that uses ...

  4. Slow Scan Telemedicine

    Science.gov (United States)

    1984-01-01

    Originally developed under contract for NASA by Ball Bros. Research Corporation for acquiring visual information from lunar and planetary spacecraft, system uses standard closed circuit camera connected to a device called a scan converter, which slows the stream of images to match an audio circuit, such as a telephone line. Transmitted to its destination, the image is reconverted by another scan converter and displayed on a monitor. In addition to assist scans, technique allows transmission of x-rays, nuclear scans, ultrasonic imagery, thermograms, electrocardiograms or live views of patient. Also allows conferencing and consultation among medical centers, general practitioners, specialists and disease control centers. Commercialized by Colorado Video, Inc., major employment is in business and industry for teleconferencing, cable TV news, transmission of scientific/engineering data, security, information retrieval, insurance claim adjustment, instructional programs, and remote viewing of advertising layouts, real estate, construction sites or products.

  5. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... evaluate changes in the gland following medication use, surgery, radiotherapy or chemotherapy top of page How should ... such as an x-ray or CT scan, surgeries or treatments using iodinated contrast material within the ...

  6. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... of page What are some common uses of the procedure? The thyroid scan is used to determine ... you are undergoing. top of page What does the equipment look like? The special camera and imaging ...

  7. Cervical spine CT scan

    Science.gov (United States)

    ... defects of the cervical spine Bone problems Fracture Osteoarthritis Disc herniation Risks Risks of CT scans include: ... Ma, MD, Assistant Professor, Chief, Sports Medicine and Shoulder Service, UCSF Department of Orthopaedic Surgery, San Francisco, ...

  8. Scanning laser Doppler vibrometry

    OpenAIRE

    2016-01-01

    With a Scanning Laser Doppler Vibrometer (SLDV) a vibrating surface is automatically scanned over predefined grid points, and data processed for displaying vibration properties like mode shapes, natural frequencies, damping ratios, and operational deflection shapes. Our SLDV – a PSV-500H from Polytec Inc. – was acquired and put to operation in October 2014, paid by a sub-donation of DKK 1,5 mill. of the total VILLUM CASMaT grant. Opening possibilities of measuring complicated vibration shapes...

  9. Advanced Network Scanning

    Directory of Open Access Journals (Sweden)

    Ashiqur Rahman

    2016-07-01

    Full Text Available Network scanning is à procedure for identifying active hosts on a network, either for the purpose of attacking them or for network security assessment. Scanning procedures, such as ping sweeps and port scans, return information about which IP addresses map to live hosts that are active on the Internet and what services they offer. Another scanning method, inverse mapping, returns information about what IP addresses do not map to live hosts; this enables an attacker to make assumptions about viable addresses. Scanning is one of three components of intelligence gathering for an attacker. In the foot printing phase, the attacker creates a profile of the target organization, with information such as its domain name system (DNS and e-mail servers, and its IP address range. Most of this information is available online. In the scanning phase, the attacker finds information about the specific IP addresses that can be accessed over the Internet, their operating systems, the system architecture, and the services running on each computer. In the enumeration phase, the attacker gathers information such as network user and group names, routing tables, and Simple Network Management Protocol (SNMP data

  10. Linear mass scans in quadrupole ion traps using the inverse Mathieu q scan.

    Science.gov (United States)

    Snyder, Dalton T; Pulliam, Christopher J; Cooks, R Graham

    2016-11-30

    Secular frequency scanning is a method of mass selectively scanning ions out of a quadrupole ion trap by linearly ramping the frequency of the resonance ejection signal through ion secular frequencies at constant rf amplitude and frequency. The method is electronically much simpler than resonance ejection but it requires a complex nonlinear calibration procedure to correlate mass-to-charge with time. A method of secular frequency scanning in quadrupole ion traps is described in which mass-to-charge is linear with time. This method, termed an "inverse Mathieu q scan", contrasts with linear frequency sweeping which requires a complex nonlinear mass calibration procedure. In the current method, mass scans are forced to be linear with time by scanning the frequency of the supplementary ac so that there is an inverse relationship between the ejected ion's Mathieu q parameter and time. In all cases, excellent mass spectral linearity is observed. The rf amplitude is shown to control both the scan range and the scan rate, whereas the ac amplitude and scan rate influence the mass resolution. The scan rate depends linearly on the rf amplitude, a unique feature of this scan. Although changes in either rf or ac amplitude affect the positions of peaks in time, they do not change the mass calibration procedure since this only requires a simple linear fit of m/z vs time. Space charge effects are shown to give rise to significant changes in resolution as well as to mass shifts. A method of secular frequency scanning which provides a linear mass scale has been demonstrated. The inverse Mathieu q scan offers a significant increase in mass range and power savings while maintaining access to linearity, paving the way for a mass spectrometer based completely on ac waveforms for ion isolation, ion activation, and ion ejection. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  11. Confocal Line Scanning Sensor

    Energy Technology Data Exchange (ETDEWEB)

    Chanbai, S; Wiora, G; Wewer, L [NanoFocus AG, Lindnerstr. 98, 46149 Oberhausen (Germany); Zafarullah, I [Applied Scientific Imaging Inc., Toronto (Canada); Roth, H, E-mail: chanbai@nanofocus.de, E-mail: wiora@nanofocus.de [Institute of Automatic Control Engineering, University of Siegen, Hoelderlinstr. 3, 57068 Siegen (Germany)

    2011-08-19

    We have developed a novel confocal-based imaging sensor for surface characterization. In this case, a tilted-plane technique is incorporated in a confocal imaging system to create a new parallel scanning scheme, enabling the sensor to be designed and developed as a robust and simple configuration. With a tilted disk consisting of in-line pinholes, a motionless parallel z scanning scheme is manifested when the specimen is transversely scanned through the stationary diffraction-foci projecting at different depths. This sensor uses a line scanning approach, so that it is entitled as a Confocal Line Scanning Sensor (CLSS). In this paper, the CLSS principle, the concept of data processing, and major calibration are described. The sensor was first developed as a two-dimensional profiler to cover the measurement ranges of up to 50 {mu}m in depth and up to 15 mm in lateral length. Experimental results were carried out using calibrated specimens for roughness measurement. In this system, the optical lateral resolution is 0.5 {mu}m, and the depth resolution, defined by noise-limited approach, is 15 nm.

  12. Radioisotope scanning in inflammatory muscle disease

    Energy Technology Data Exchange (ETDEWEB)

    Brown, M.B.; Swift, T.R.; Spies, S.M.

    1976-06-01

    Fourteen whole-body rectilinear bone scans using technetium 99m-polyphosphate were done in nine patients with well-documented inflammatory myopathy (either polymyositis or dermatomyositis). In all nine patients the scans showed evidence of increased muscle labeling. Muscle uptake was markedly increased in one patient, moderately increased in two patients, and minimally increased in six patients. The degree of muscle labeling correlated with the severity of the muscle weakness at the time the scan was done. In four patients, who received high-dose corticosteroid treatment, muscle uptake was decreased following therapy. These findings suggest that radioisotope scanning may be useful in the diagnosis and management of patients with inflammatory muscle diseases.

  13. A Scanning Quantum Cryogenic Atom Microscope

    CERN Document Server

    Yang, Fan; Taylor, Stephen F; Turner, Richard W; Lev, Benjamin L

    2016-01-01

    Microscopic imaging of local magnetic fields provides a window into the organizing principles of complex and technologically relevant condensed matter materials. However, a wide variety of intriguing strongly correlated and topologically nontrivial materials exhibit poorly understood phenomena outside the detection capability of state-of-the-art high-sensitivity, high-resolution scanning probe magnetometers. We introduce a quantum-noise-limited scanning probe magnetometer that can operate from room-to-cryogenic temperatures with unprecedented DC-field sensitivity and micron-scale resolution. The Scanning Quantum Cryogenic Atom Microscope (SQCRAMscope) employs a magnetically levitated atomic Bose-Einstein condensate (BEC), thereby providing immunity to conductive and blackbody radiative heating. The SQCRAMscope has a noise floor of 300 pT and provides a 100x improvement in magnetic flux sensitivity over previous atomic scanning probe magnetometers. These capabilities are carefully benchmarked by imaging magnet...

  14. Femtosecond scanning tunneling microscope

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, A.J.; Donati, G.P.; Rodriguez, G.; Gosnell, T.R.; Trugman, S.A.; Some, D.I.

    1998-11-01

    This is the final report of a three-year, Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). By combining scanning tunneling microscopy with ultrafast optical techniques we have developed a novel tool to probe phenomena on atomic time and length scales. We have built and characterized an ultrafast scanning tunneling microscope in terms of temporal resolution, sensitivity and dynamic range. Using a novel photoconductive low-temperature-grown GaAs tip, we have achieved a temporal resolution of 1.5 picoseconds and a spatial resolution of 10 nanometers. This scanning tunneling microscope has both cryogenic and ultra-high vacuum capabilities, enabling the study of a wide range of important scientific problems.

  15. Multimodal imaging of the human temporal bone: A comparison of CT and optical scanning techniques

    Science.gov (United States)

    Voie, Arne H.; Whiting, Bruce; Skinner, Margaret; Neely, J. Gail; Lee, Kenneth; Holden, Tim; Brunsden, Barry

    2003-10-01

    A collaborative effort between Washington University in St. Louis and Spencer Technologies in Seattle, WA has been undertaken to create a multimodal 3D reconstruction of the human cochlea and vestibular system. The goal of this project is to improve the accuracy of in vivo CT reconstructions of implanted cochleae, and to expand the knowledge of high-resolution anatomical detail provided by orthogonal-plane optical sectioning (OPFOS). At WUSL, computed tomography (CT) images of the cochlea are used to determine the position of cochlear implant electrodes relative to target auditory neurons. The cochlear implant position is determined using pre- and post-operative CT scans. The CT volumes are cross-registered to align the semicircular canals and internal auditory canal, which have a unique configuration in 3-D space. The head of a human body donor was scanned with a clinical CT device, after which the temporal bones were removed, fixed in formalin and trimmed prior to scanning with a laboratory Micro CT scanner. Following CT, the temporal bones were sent to the OPFOS Imaging Lab at Spencer Technologies for a further analysis. 3-D reconstructions of CT and OPFOS imaging modalities were compared, and results are presented. [Work supported by NIDCD Grants R44-03623-5 and R01-00581-13.

  16. Scanning the phenomenological MSSM

    CERN Document Server

    Wuerzinger, Jonas

    2017-01-01

    A framework to perform scans in the 19-dimensional phenomenological MSSM is developed and used to re-evaluate the ATLAS experiments' sensitivity to R-parity-conserving supersymmetry with LHC Run 2 data ($\\sqrt{s}=13$ TeV), using results from 14 separate ATLAS searches. We perform a $\\tilde{t}_1$ dedicated scan, only considering models with $m_{\\tilde{t}_1}<1$ TeV, while allowing both a neutralino ($\\tilde{\\chi}_1^0$) and a sneutrino ($\\tilde{\

  17. Adaptive Optical Scanning Holography

    Science.gov (United States)

    Tsang, P. W. M.; Poon, Ting-Chung; Liu, J.-P.

    2016-01-01

    Optical Scanning Holography (OSH) is a powerful technique that employs a single-pixel sensor and a row-by-row scanning mechanism to capture the hologram of a wide-view, three-dimensional object. However, the time required to acquire a hologram with OSH is rather lengthy. In this paper, we propose an enhanced framework, which is referred to as Adaptive OSH (AOSH), to shorten the holographic recording process. We have demonstrated that the AOSH method is capable of decreasing the acquisition time by up to an order of magnitude, while preserving the content of the hologram favorably. PMID:26916866

  18. Applications. SCANS Plans Portfolio.

    Science.gov (United States)

    Sample, Barbara

    This guide assists English-as-a-Second-Language educators in helping students fill out simple application forms. The guide discusses performance outcomes, communications teaching points, SCANS (Secretary's Committee on Achieving Necessary Skills) competencies, classroom configurations, materials, and procedures. Blank forms, suitable for…

  19. Thyroid Scan and Uptake

    Medline Plus

    Full Text Available ... Español More Info Images/Videos About Us News Physician Resources Professions Site Index A-Z Thyroid Scan ... often unattainable using other imaging procedures. Tell your doctor if there’s a possibility you are pregnant or ...

  20. Scanning bubble chamber pictures

    CERN Multimedia

    1974-01-01

    These were taken at the 2 m hydrogen bubble chamber. The photo shows an early Shiva system where the pre-measurements needed to qualify the event were done manually (cf photo 7408136X). The scanning tables were located in bld. 12. Gilberte Saulmier sits on foreground, Inge Arents at centre.

  1. Sinus MRI scan

    Science.gov (United States)

    ... A CT scan may be preferred in emergency cases, since it is faster and often available in the emergency room. Note: MRI is not as effective as CT in defining the anatomy of the sinuses, and therefore is not typically used for suspected acute sinusitis.

  2. SCANNING-DLTS

    OpenAIRE

    Breitenstein, O.

    1989-01-01

    Scanning Deep Level Transient Spectroscopy (SDLTS) is a current SEM technique for the detection of the local distribution of deep level centres in semiconductors. The contribution deals with the physical foundations of the SDLTS technique and it discusses the demands on the instrumentation. The measurement practice is described and illustrated by several experimental examples. Finally, the possibilities and limitations of SDLTS are critically reviewed.

  3. A synthetic covariance matrix for monitoring by terrestrial laser scanning

    Science.gov (United States)

    Kauker, Stephanie; Schwieger, Volker

    2017-06-01

    Modelling correlations within laser scanning point clouds can be achieved by using synthetic covariance matrices. These are based on the elementary error model which contains different groups of correlations: non-correlating, functional correlating and stochastic correlating. By applying the elementary error model on terrestrial laser scanning several groups of error sources should be considered: instrumental, atmospheric and object based. This contribution presents calculations for the Leica HDS 7000. The determined variances and the spatial correlations of the points are estimated and discussed. Hereby, the mean standard deviation of the point cloud is up to 0.6 mm and the mean correlation is about 0.6 with respect to 5 m scanning range. The change of these numerical values compared to previous publications as Kauker and Schwieger [17] is mainly caused by the complete consideration of the object related error sources.

  4. QUANTITATIVE CONFOCAL LASER SCANNING MICROSCOPY

    Directory of Open Access Journals (Sweden)

    Merete Krog Raarup

    2011-05-01

    Full Text Available This paper discusses recent advances in confocal laser scanning microscopy (CLSM for imaging of 3D structure as well as quantitative characterization of biomolecular interactions and diffusion behaviour by means of one- and two-photon excitation. The use of CLSM for improved stereological length estimation in thick (up to 0.5 mm tissue is proposed. The techniques of FRET (Fluorescence Resonance Energy Transfer, FLIM (Fluorescence Lifetime Imaging Microscopy, FCS (Fluorescence Correlation Spectroscopy and FRAP (Fluorescence Recovery After Photobleaching are introduced and their applicability for quantitative imaging of biomolecular (co-localization and trafficking in live cells described. The advantage of two-photon versus one-photon excitation in relation to these techniques is discussed.

  5. Horizon Scanning for Pharmaceuticals

    DEFF Research Database (Denmark)

    Lepage-Nefkens, Isabelle; Douw, Karla; Mantjes, GertJan

    will collect country-specific information, liaise between the central HS unit and country-specific clinical and other experts, coordinate the national prioritization process (to select products for early assessment), and communicate the output of the HSS to national decision makers.  The outputs of the joint...... for a joint horizon scanning system (HSS).  We propose to create a central “horizon scanning unit” to perform the joint HS activities (a newly established unit, an existing HS unit, or a third party commissioned and financed by the collaborating countries). The unit will be responsible for the identification...... and filtration of new and emerging pharmaceutical products. It will maintain and update the HS database, organise company pipeline meetings, and disseminate the HSS’s outputs.  The HS unit works closely together with the designated national HS experts in each collaborating country. The national HS experts...

  6. Scanning Quantum Decoherence Microscopy

    OpenAIRE

    2008-01-01

    The use of qubits as sensitive magnetometers has been studied theoretically and recent demonstrated experimentally. In this paper we propose a generalisation of this concept, where a scanning two-state quantum system is used to probe the subtle effects of decoherence (as well as its surrounding electromagnetic environment). Mapping both the Hamiltonian and decoherence properties of a qubit simultaneously, provides a unique image of the magnetic (or electric) field properties at the nanoscale....

  7. Scanning ultrafast electron microscopy.

    Science.gov (United States)

    Yang, Ding-Shyue; Mohammed, Omar F; Zewail, Ahmed H

    2010-08-24

    Progress has been made in the development of four-dimensional ultrafast electron microscopy, which enables space-time imaging of structural dynamics in the condensed phase. In ultrafast electron microscopy, the electrons are accelerated, typically to 200 keV, and the microscope operates in the transmission mode. Here, we report the development of scanning ultrafast electron microscopy using a field-emission-source configuration. Scanning of pulses is made in the single-electron mode, for which the pulse contains at most one or a few electrons, thus achieving imaging without the space-charge effect between electrons, and still in ten(s) of seconds. For imaging, the secondary electrons from surface structures are detected, as demonstrated here for material surfaces and biological specimens. By recording backscattered electrons, diffraction patterns from single crystals were also obtained. Scanning pulsed-electron microscopy with the acquired spatiotemporal resolutions, and its efficient heat-dissipation feature, is now poised to provide in situ 4D imaging and with environmental capability.

  8. Scanning ultrafast electron microscopy

    Science.gov (United States)

    Yang, Ding-Shyue; Mohammed, Omar F.; Zewail, Ahmed H.

    2010-01-01

    Progress has been made in the development of four-dimensional ultrafast electron microscopy, which enables space-time imaging of structural dynamics in the condensed phase. In ultrafast electron microscopy, the electrons are accelerated, typically to 200 keV, and the microscope operates in the transmission mode. Here, we report the development of scanning ultrafast electron microscopy using a field-emission-source configuration. Scanning of pulses is made in the single-electron mode, for which the pulse contains at most one or a few electrons, thus achieving imaging without the space-charge effect between electrons, and still in ten(s) of seconds. For imaging, the secondary electrons from surface structures are detected, as demonstrated here for material surfaces and biological specimens. By recording backscattered electrons, diffraction patterns from single crystals were also obtained. Scanning pulsed-electron microscopy with the acquired spatiotemporal resolutions, and its efficient heat-dissipation feature, is now poised to provide in situ 4D imaging and with environmental capability. PMID:20696933

  9. Forensic Scanning Electron Microscope

    Science.gov (United States)

    Keeley, R. H.

    1983-03-01

    The scanning electron microscope equipped with an x-ray spectrometer is a versatile instrument which has many uses in the investigation of crime and preparation of scientific evidence for the courts. Major applications include microscopy and analysis of very small fragments of paint, glass and other materials which may link an individual with a scene of crime, identification of firearms residues and examination of questioned documents. Although simultaneous observation and chemical analysis of the sample is the most important feature of the instrument, other modes of operation such as cathodoluminescence spectrometry, backscattered electron imaging and direct x-ray excitation are also exploited. Marks on two bullets or cartridge cases can be compared directly by sequential scanning with a single beam or electronic linkage of two instruments. Particles of primer residue deposited on the skin and clothing when a gun is fired can be collected on adhesive tape and identified by their morphology and elemental composition. It is also possible to differentiate between the primer residues of different types of ammunition. Bullets may be identified from the small fragments left behind as they pass through the body tissues. In the examination of questioned documents the scanning electron microscope is used to establish the order in which two intersecting ink lines were written and to detect traces of chemical markers added to the security inks on official documents.

  10. 胸内结节病18F-FPG PET/CT与支气管肺泡灌洗液检查相关性分析%Correlation between 18F-FDG PET/CT scan and bronchoalveolar lavage fluid in patients with thoracic sarcoidosis

    Institute of Scientific and Technical Information of China (English)

    吴昱; 梁英魁; 冯华松; 段蕴铀; 聂舟山; 丁新民

    2013-01-01

    Objective: To study the correlation between 18fluorine deoxyglucose ( F-FDG) positron emission tomography/ computerized tomography(PET/CT) scan and bronchoalveolar lavage fluid(BALF)in patients with thoracic sarcoidosis, and explore the mechanism of 18F-FDG uptake in sarcoidosis. Methods: Nineteen patients with thoracic sarcoidosis underwent18F-FDG PET/CT scan and BALF. The CD4 + /CD8 + T cell ratio and serum angiotensin converting enzyme ( sACE ) , tumor necrosis factor-α ( TNF-α) and soluble interleukin-2 receptor ( sIL-2R) levels in bronchoalveolar lavage fluid were detected. F-FDG PET/CT scan was semi-quantitatively analyzed by maximum standardized uptake value ( SUVmax) and mean standardized uptake value ( SUVmean). The correlation between SUVmax, SUVmean, CD4+/CD8 + T cell ratio, sACE, TNF-α and sIL-2R levels was also analyzed. Results: SUVmax was significantly correlated to SUVmean( P < 0. 01 ) . SUVmax was significantly correlated to sACE ( P < 0. 01) and TNF-α ( P < 0. 01 ) , respectively; SUVmean was also significantly correlated to sACE ( P < 0. 01 ) and TNF-α ( P < 0. 01 ) , respectively. SUVmean was correlated to CD4 + /CD8+ T cell ratio (P <0. 05 ). Conclusions: The 18F-FDG uptake capacity is high in high load of sarcoidosis granuloma; its ability to 18F-FDG uptake may be associated with T cell activation. SUVmean may be superior to SUVmax in determining the activity of sarcoidosis.%目的:了解胸内结节病18氟-脱氧葡萄糖正电子发射断层显像/计算机断层扫描(18F-FDG PET/CT)检查与支气管肺泡灌洗液检查(BALF)相关性,探讨结节病摄取18F-FDG机制.方法:19例病理确诊胸内结节病患者行18F-FDG PET/CT检查及BALF,检测CD4+/CD8+ T细胞比值和血清血管紧张素转化酶(sACE)、肿瘤坏死因子-α(TNF-α)及可溶性白细胞介素-2受体(sIL-2R)含量,18F-FDG PET/CT用最大标准摄取值(SUVmax)和平均标准摄取值(SUVmean)半定量分析,并分别分析SUVmax和SUVmean与CD4+/CD8+ T细

  11. Surface micromachined scanning mirrors

    DEFF Research Database (Denmark)

    Mattsson, Kent Erik

    1992-01-01

    Both aluminum cantilever and torsional scanning mirrors have been fabricated and their static and dynamic properties are studied experimentally and theoretically. The experiments showed resonance frequencies in the range of 163 k-Hz - 632 kHz for cantilever beams with Q values between 5 and 11....... Torsional mirrors showed resonance frequencies in the range of 410 kHz - 667 kHz with Q values of 10 - 17. All measurements performed at atmospheric pressure. Both types of mechanical structures were deflected electrostatically at large angles (± 5°) more than 1011 times without breaking and without any...

  12. Ultrafast scanning tunneling microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Botkin, D.A. [California Univ., Berkeley, CA (United States). Dept. of Physics]|[Lawrence Berkeley Lab., CA (United States)

    1995-09-01

    I have developed an ultrafast scanning tunneling microscope (USTM) based on uniting stroboscopic methods of ultrafast optics and scanned probe microscopy to obtain nanometer spatial resolution and sub-picosecond temporal resolution. USTM increases the achievable time resolution of a STM by more than 6 orders of magnitude; this should enable exploration of mesoscopic and nanometer size systems on time scales corresponding to the period or decay of fundamental excitations. USTM consists of a photoconductive switch with subpicosecond response time in series with the tip of a STM. An optical pulse from a modelocked laser activates the switch to create a gate for the tunneling current, while a second laser pulse on the sample initiates a dynamic process which affects the tunneling current. By sending a large sequence of identical pulse pairs and measuring the average tunnel current as a function of the relative time delay between the pulses in each pair, one can map the time evolution of the surface process. USTM was used to measure the broadband response of the STM`s atomic size tunnel barrier in frequencies from tens to hundreds of GHz. The USTM signal amplitude decays linearly with the tunnel junction conductance, so the spatial resolution of the time-resolved signal is comparable to that of a conventional STM. Geometrical capacitance of the junction does not appear to play an important role in the measurement, but a capacitive effect intimately related to tunneling contributes to the measured signals and may limit the ultimate resolution of the USTM.

  13. Bone Densitometry (Bone Density Scan)

    Science.gov (United States)

    ... News Physician Resources Professions Site Index A-Z Bone Densitometry (DEXA) Bone densitometry, also called dual-energy ... limitations of DEXA Bone Densitometry? What is a Bone Density Scan (DEXA)? Bone density scanning, also called ...

  14. Scanned-cantilever atomic force microscope with large scanning range

    Institute of Scientific and Technical Information of China (English)

    Jintao Yang; Wendong Xu

    2006-01-01

    A scanned-cantilever atomic force microscope (AFM) with large scanning range is proposed, which adopts a new design named laser spot tracking. The scanned-cantilever AFM uses the separate flexure x-y scanner and z scanner instead of the conventional piezoelectric tube scanner. The closed-loop control and integrated capacitive sensors of these scanners can insure that the images of samples have excellent linearity and stability. According to the experimental results, the scanned-cantilever AFM can realize maximal 100 × 100 (μm) scanning range, and 1-nm resolution in z direction, which can meet the requirements of large scale sample testing.

  15. Prognostic significance of FDG PET/CT on the follow-up of patients of differentiated thyroid carcinoma with negative 131I whole-body scan and elevated thyroglobulin levels: correlation with clinical and histopathologic characteristics and long-term follow-up data.

    Science.gov (United States)

    Vural, Gulin Ucmak; Akkas, Burcu Esen; Ercakmak, Nur; Basu, Sandip; Alavi, Abass

    2012-10-01

    This study aimed (a) to determine the clinical and histopathologic factors that are related to FDG avidity in the recurrence/metastases of patients with differentiated thyroid carcinoma (DTC) who present with elevated thyroglobulin (Tg) levels and negative 131I whole-body scans (WBSs), (b) to clarify Tg cutoff levels in this setting, and (c) to evaluate the impact of PET/CT on patient management strategies and hence to critically look into the importance of PET/CT in combination with Tg in clinical decision making. A total of 105 patients with DTC with negative 131I WBS and neck ultrasound but elevated Tg, who underwent FDG PET/CT for the suspicion of recurrent/metastatic disease, were included in this analysis. All patients had previously undergone total thyroidectomy and radioiodine ablation/therapy. PET/CT results were correlated with Tg levels and clinical and histopathologic characteristics of the primary tumor compared with the follow-up data. PET/CT was true-positive in 69 patients (of which 23 had surgically amenable disease), true-negative in 20, false-positive in 6 patients and false-negative in 10 patients. Extrathyroidal spread was an independent risk factor related to FDG-avid recurrence. Tumor size was significantly higher in PET-positive patients than others, 2.25 (1.8) versus 1.5 (1.1) cm, P = 0.02. Significant correlation was observed between PET positivity and high Tg levels (P = 0.0001). Receiver operating characteristic curve analysis demonstrated a Tg cutoff of 1.9 ng/mL under thyroid-stimulating hormone suppression, 38.2 ng/mL with thyroid-stimulating hormone stimulation. Among PET-negative patients, no recurrence was detected in patients with undetectable/suppressible Tg in on-therapy state. PET positivity correlated with extrathyroidal spread, and elevated Tg in recurrent/metastatic DTC. FDG PET/CT in combination with Tg levels was crucial in defining management strategies in patients with DTC with negative 131I WBS. A negative FDG PET

  16. Automatic Ultrasound Scanning

    DEFF Research Database (Denmark)

    Moshavegh, Ramin

    Medical ultrasound has been a widely used imaging modality in healthcare platforms for examination, diagnostic purposes, and for real-time guidance during surgery. However, despite the recent advances, medical ultrasound remains the most operator-dependent imaging modality, as it heavily relies...... on the user adjustments on the scanner interface to optimize the scan settings. This explains the huge interest in the subject of this PhD project entitled “AUTOMATIC ULTRASOUND SCANNING”. The key goals of the project have been to develop automated techniques to minimize the unnecessary settings...... on the scanners, and to improve the computer-aided diagnosis (CAD) in ultrasound by introducing new quantitative measures. Thus, four major issues concerning automation of the medical ultrasound are addressed in this PhD project. They touch upon gain adjustments in ultrasound, automatic synthetic aperture image...

  17. Micro scanning probes

    CERN Document Server

    Niblock, T

    2001-01-01

    This thesis covers the design methodology, theory, modelling, fabrication and evaluation of a Micro-Scanning-Probe. The device is a thermally actuated bimorph quadrapod fabricated using Micro Electro Mechanical Systems technology. A quadrapod is a structure with four arms, in this case a planar structure with the four arms forming a cross which is dry etched out of a silicon diaphragm. Each arm has a layer of aluminium deposited on it forming a bimorph. Through heating each arm actuation is achieved in the plane of the quadrapod and the direction normal to it. Fabrication of the device has required the development of bulk micromachining techniques to handle post CMOS fabricated wafers and the patterning of thickly sputtered aluminium in bulk micro machined cavities. CMOS fabrication techniques were used to incorporate diodes onto the quadrapod arms for temperature measurement of the arms. Fine tungsten and silicon tips have also been fabricated to allow tunnelling between the tip and the platform at the centr...

  18. A Scanning Cavity Microscope

    CERN Document Server

    Mader, Matthias; Hänsch, Theodor W; Hunger, David

    2014-01-01

    Imaging of the optical properties of individual nanosystems beyond fluorescence can provide a wealth of information. However, the minute signals for absorption and dispersion are challenging to observe, and only specialized techniques requiring sophisticated noise rejection are available. Here we use signal enhancement in a scanning optical microcavity to demonstrate ultra-sensitive imaging. Harnessing multiple interactions of probe light with a sample within an optical resonator, we achieve a 1700-fold signal enhancement compared to diffraction-limited microscopy. We demonstrate quantitative imaging of the extinction cross section of gold nanoparticles with a sensitivity below 1 nm2, we show a method to improve spatial resolution potentially below the diffraction limit by using higher order cavity modes, and we present measurements of the birefringence and extinction contrast of gold nanorods. The demonstrated simultaneous enhancement of absorptive and dispersive signals promises intriguing potential for opt...

  19. FibroScan技术与乙肝肝硬化患者食管静脉曲张程度的相关性分析%Correlation analysis between FibroScan and esophageal varices degree in hepatitis B liver cirrhosis patients

    Institute of Scientific and Technical Information of China (English)

    刘丹阳; 张明香; 李佰君; 许春; 田霞

    2015-01-01

    目的:探讨瞬时弹性成像(FibroScan)与乙型肝炎(乙肝)肝硬化患者食管静脉曲张程度的相关性,以评价FibroScan对乙肝肝硬化患者食管静脉曲张程度的诊断价值。方法231例行胃镜检查的乙型肝炎肝硬化患者,应用FibroScan检测肝硬度值(LSM)得出轻、中、重度食管静脉曲张分别为119、31、81例,分别作为轻、中、重度食管静脉曲张组,同时检测相关生化指标。结果轻、中、重度食管静脉曲张患者的LSM平均值分别是(17.04±11.73)kPa、(22.63±18.70)kPa、(29.20±19.14)kPa。三组间比较差异有统计学意义(F=14.52, P<0.01);组间两两比较,轻、重度食管静脉曲张患者差异有统计学意义(P<0.01)。结论 FibroScan检测可以用来判断乙型肝炎肝硬化患者食管静脉曲张程度,值得临床推广应用。%Objective To explore the correlation between transient elastography (FibroScan) and esophageal varices degree in hepatitis B liver cirrhosis patients, in order to evaluate the diagnostic value of FibroScan for esophageal varices degree in hepatitis B liver cirrhosis patients. Methods A total of 231 patients with hepatitis B liver cirrhosis receiving gastroscopy were selected, and their liver stiffness measurement (LSM) results under FibroScan examination showed that there were 199 cases with mild esophageal varices, 31 cases with moderate esophageal varices, and 81 cases with severe esophageal varices. They were taken as mild esophageal varices group, moderate esophageal varices group and severe esophageal varices group respectively. Some other related biochemical indexes were also detected. Results The average LSM values of mild, moderate, and severe esophageal varices patients were respectively (17.04±11.73)kPa, (22.63±18.70)kPa, and (29.20±19.14)kPa. The differences of the three groups had statistical significance (F=14.52, P<0.01). In the comparisons between each two groups, the difference between mild and severe

  20. Optical correlation

    NARCIS (Netherlands)

    Boden, J.A.

    1974-01-01

    A survey is given of the most common types of coherent optical correlators, which are classified as spatial plane correlators, frequency plane correlators and special reference correlators. Only the spatial plane correlators are dealt with rather thoroughly. Basic principles, some special features,

  1. Differential scanning calorimetry.

    Science.gov (United States)

    Spink, Charles H

    2008-01-01

    Differential scanning calorimetry (DSC) has emerged as a powerful experimental technique for determining thermodynamic properties of biomacromolecules. The ability to monitor unfolding or phase transitions in proteins, polynucleotides, and lipid assemblies has not only provided data on thermodynamic stability for these important molecules, but also made it possible to examine the details of unfolding processes and to analyze the characteristics of intermediate states involved in the melting of biopolymers. The recent improvements in DSC instrumentation and software have generated new opportunities for the study of the effects of structure and changes in environment on the behavior of proteins, nucleic acids, and lipids. This review presents some of the details of application of DSC to the examination of the unfolding of biomolecules. After a brief introduction to DSC instrumentation used for the study of thermal transitions, the methods for obtaining basic thermodynamic information from the DSC curve are presented. Then, using DNA unfolding as an example, methods for the analysis of the melting transition are presented that allow deconvolution of the DSC curves to determine more subtle characteristics of the intermediate states involved in unfolding. Two types of transitions are presented for analysis, the first example being the unfolding of two large synthetic polynucleotides, which display high cooperativity in the melting process. The second example shows the application of DSC for the study of the unfolding of a simple hairpin oligonucleotide. Details of the data analysis are presented in a simple spreadsheet format.

  2. GPR scan assessment

    Directory of Open Access Journals (Sweden)

    Abbas M. Abbas

    2015-06-01

    Full Text Available Mekaad Radwan monument is situated in the neighborhood of Bab Zuweila in the historical Cairo, Egypt. It was constructed at the middle XVII century (1635 AD. The building has a rectangle shape plan (13 × 6 m with the longitudinal sides approximately WNW-ESE. It comprises three storages namely; the ground floor; the opened floor (RADWAN Bench and the living floor with a total elevation of 15 m above the street level. The building suffers from severe deterioration phenomena with patterns of damage which have occurred over time. These deterioration and damages could be attributed to foundation problems, subsoil water and also to the earthquake that affected the entire Greater Cairo area in October 1992. Ground Penetrating Radar (GPR scan was accomplished against the walls of the opened floor (RADWAN Bench to evaluate the hazard impact on the walls textures and integrity. The results showed an anomalous feature through the southern wall of RADWAN Bench. A mathematical model has been simulated to confirm the obtained anomaly and the model response exhibited a good matching with the outlined anomaly.

  3. GPR scan assessment

    Science.gov (United States)

    Abbas, Abbas M.; Salah, Hany; Massoud, Usama; Fouad, Mona; Abdel-Hafez, Mahmoud

    2015-06-01

    Mekaad Radwan monument is situated in the neighborhood of Bab Zuweila in the historical Cairo, Egypt. It was constructed at the middle XVII century (1635 AD). The building has a rectangle shape plan (13 × 6 m) with the longitudinal sides approximately WNW-ESE. It comprises three storages namely; the ground floor; the opened floor (RADWAN Bench) and the living floor with a total elevation of 15 m above the street level. The building suffers from severe deterioration phenomena with patterns of damage which have occurred over time. These deterioration and damages could be attributed to foundation problems, subsoil water and also to the earthquake that affected the entire Greater Cairo area in October 1992. Ground Penetrating Radar (GPR) scan was accomplished against the walls of the opened floor (RADWAN Bench) to evaluate the hazard impact on the walls textures and integrity. The results showed an anomalous feature through the southern wall of RADWAN Bench. A mathematical model has been simulated to confirm the obtained anomaly and the model response exhibited a good matching with the outlined anomaly.

  4. LANL Robotic Vessel Scanning

    Energy Technology Data Exchange (ETDEWEB)

    Webber, Nels W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-11-25

    Los Alamos National Laboratory in J-1 DARHT Operations Group uses 6ft spherical vessels to contain hazardous materials produced in a hydrodynamic experiment. These contaminated vessels must be analyzed by means of a worker entering the vessel to locate, measure, and document every penetration mark on the vessel. If the worker can be replaced by a highly automated robotic system with a high precision scanner, it will eliminate the risks to the worker and provide management with an accurate 3D model of the vessel presenting the existing damage with the flexibility to manipulate the model for better and more in-depth assessment.The project was successful in meeting the primary goal of installing an automated system which scanned a 6ft vessel with an elapsed time of 45 minutes. This robotic system reduces the total time for the original scope of work by 75 minutes and results in excellent data accumulation and transmission to the 3D model imaging program.

  5. Gallium scans in myasthenia gravis

    Energy Technology Data Exchange (ETDEWEB)

    Swick, H.M. (Univ. of Kentucky, Lexington); Preston, D.F.; McQuillen, M.P.

    1976-01-01

    A study was conducted to determine whether /sup 67/Ga scans could be used for the detection of thymomas and to investigate the activity of the thymus gland in patients with myasthenia gravis. Scans of the anterior mediastinum proved to be a reliable way to detect thymomas. The scans were positive in eight patients including three with myasthenia gravis and histologically proved thymomas, three others with severe myasthenia gravis and thymic tumors, and two with histologically proved thymomas not associated with myasthenia. Activity on /sup 67/Ga scans was not directly related to the increased activity of the thymus gland that is presumed to be associated with myasthenia gravis. (HLW)

  6. Re-scan confocal microscopy: scanning twice for better resolution

    NARCIS (Netherlands)

    De Luca, G.M.R.; Breedijk, R.M.P.; Brandt, R.A.J.; Zeelenberg, C.H.C.; De Jong, B.E.; Timmermans, W.; Nahidi Azar, L.; Hoebe, R.A.; Stallinga, S.; Manders, E.M.M.

    2013-01-01

    We present a new super-resolution technique, Re-scan Confocal Microscopy (RCM), based on standard confocal microscopy extended with an optical (re-scanning) unit that projects the image directly on a CCD-camera. This new microscope has improved lateral resolution and strongly improved sensitivity wh

  7. Re-scan confocal microscopy : scanning twice for better resolution

    NARCIS (Netherlands)

    De Luca, G.M.R.; Breedijk, R.M.P.; Brandt, R.A.J.; Zeelenberg, C.H.C.; de Jong, B.E.; Timmermans, W.; Azar, L.N.; Hoebe, R.A.; Stallinga, S.; Manders, E.M.M.

    2013-01-01

    We present a new super-resolution technique, Re-scan Confocal Microscopy (RCM), based on standard confocal microscopy extended with an optical (re-scanning) unit that projects the image directly on a CCD-camera. This new microscope has improved lateral resolution and strongly improved sensitivity wh

  8. Scanning tunneling microscopy II further applications and related scanning techniques

    CERN Document Server

    Güntherodt, Hans-Joachim

    1992-01-01

    Scanning Tunneling Microscopy II, like its predecessor, presents detailed and comprehensive accounts of the basic principles and broad range of applications of STM and related scanning probe techniques. The applications discussed in this volume come predominantly from the fields of electrochemistry and biology. In contrast to those described in Vol. I, these sudies may be performed in air and in liquids. The extensions of the basic technique to map other interactions are described inchapters on scanning force microscopy, magnetic force microscopy, scanning near-field optical microscopy, together with a survey of other related techniques. Also described here is the use of a scanning proximal probe for surface modification. Togehter, the two volumes give a comprehensive account of experimental aspcets of STM. They provide essentialreading and reference material for all students and researchers involvedin this field.

  9. Scanning tunneling microscopy II further applications and related scanning techniques

    CERN Document Server

    Güntherodt, Hans-Joachim

    1995-01-01

    Scanning Tunneling Microscopy II, like its predecessor, presents detailed and comprehensive accounts of the basic principles and broad range of applications of STM and related scanning probe techniques. The applications discussed in this volume come predominantly from the fields of electrochemistry and biology. In contrast to those described in STM I, these studies may be performed in air and in liquids. The extensions of the basic technique to map other interactions are described in chapters on scanning force microscopy, magnetic force microscopy, and scanning near-field optical microscopy, together with a survey of other related techniques. Also described here is the use of a scanning proximal probe for surface modification. Together, the two volumes give a comprehensive account of experimental aspects of STM. They provide essential reading and reference material for all students and researchers involved in this field. In this second edition the text has been updated and new methods are discussed.

  10. Dendritic Cells for SYN Scan Detection

    CERN Document Server

    Greensmith, Julie

    2010-01-01

    Artificial immune systems have previously been applied to the problem of intrusion detection. The aim of this research is to develop an intrusion detection system based on the function of Dendritic Cells (DCs). DCs are antigen presenting cells and key to activation of the human immune system, behaviour which has been abstracted to form the Dendritic Cell Algorithm (DCA). In algorithmic terms, individual DCs perform multi-sensor data fusion, asynchronously correlating the the fused data signals with a secondary data stream. Aggregate output of a population of cells, is analysed and forms the basis of an anomaly detection system. In this paper the DCA is applied to the detection of outgoing port scans using TCP SYN packets. Results show that detection can be achieved with the DCA, yet some false positives can be encountered when simultaneously scanning and using other network services. Suggestions are made for using adaptive signals to alleviate this uncovered problem.

  11. Bone Densitometry (Bone Density Scan)

    Science.gov (United States)

    ... of DXA Bone Densitometry? What is a Bone Density Scan (DXA)? Bone density scanning, also called dual-energy x-ray absorptiometry ( ... is today's established standard for measuring bone mineral density (BMD). An x-ray (radiograph) is a noninvasive ...

  12. Scanning for oscillations

    Science.gov (United States)

    de Cheveigné, Alain; Arzounian, Dorothée

    2015-12-01

    Objective. Oscillations are an important aspect of brain activity, but they often have a low signal-to-noise ratio (SNR) due to source-to-electrode mixing with competing brain activity and noise. Filtering can improve the SNR of narrowband signals, but it introduces ringing effects that may masquerade as genuine oscillations, leading to uncertainty as to the true oscillatory nature of the phenomena. Likewise, time-frequency analysis kernels have a temporal extent that blurs the time course of narrowband activity, introducing uncertainty as to timing and causal relations between events and/or frequency bands. Approach. Here, we propose a methodology that reveals narrowband activity within multichannel data such as electroencephalography, magnetoencephalography, electrocorticography or local field potential. The method exploits the between-channel correlation structure of the data to suppress competing sources by joint diagonalization of the covariance matrices of narrowband filtered and unfiltered data. Main results. Applied to synthetic and real data, the method effectively extracts narrowband components at unfavorable SNR. Significance. Oscillatory components of brain activity, including weak sources that are hard or impossible to observe using standard methods, can be detected and their time course plotted accurately. The method avoids the temporal artifacts of standard filtering and time-frequency analysis methods with which it remains complementary.

  13. An interchangeable scanning Hall probe/scanning SQUID microscope.

    Science.gov (United States)

    Tang, Chiu-Chun; Lin, Hui-Ting; Wu, Sing-Lin; Chen, Tse-Jun; Wang, M J; Ling, D C; Chi, C C; Chen, Jeng-Chung

    2014-08-01

    We have constructed a scanning probe microscope for magnetic imaging, which can function as a scanning Hall probe microscope (SHPM) and as a scanning SQUID microscope (SSM). The scanning scheme, applicable to SHPM and SSM, consists of a mechanical positioning (sub) micron-XY stage and a flexible direct contact to the sample without a feedback control system for the Z-axis. With the interchangeable capability of operating two distinct scanning modes, our microscope can incorporate the advantageous functionalities of the SHPM and SSM with large scan range up to millimeter, high spatial resolution (⩽4 μm), and high field sensitivity in a wide range of temperature (4.2 K-300 K) and magnetic field (10(-7) T-1 T). To demonstrate the capabilities of the system, we present magnetic images scanned with SHPM and SSM, including a RbFeB magnet and a nickel grid pattern at room temperature, surface magnetic domain structures of a La(2/3)Ca(1/3)MnO3 thin film at 77 K, and superconducting vortices in a striped niobium film at 4.2 K.

  14. In vitro dose measurements in a human cadaver with abdomen/pelvis CT scans

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Da; Padole, Atul; Li, Xinhua; Singh, Sarabjeet; Khawaja, Ranish Deedar Ali; Lira, Diego; Shi, Jim Q.; Otrakji, Alexi; Kalra, Mannudeep K.; Liu, Bob, E-mail: bliu7@mgh.harvard.edu [Department of Radiology, Massachusetts General Hospital, Boston, Massachusetts 02114 (United States); Liu, Tianyu; Xu, X. George [Nuclear Engineering Program, Rensselaer Polytechnic Institute, Troy, New York 12180 (United States)

    2014-09-15

    Purpose: To present a study of radiation dose measurements with a human cadaver scanned on a clinical CT scanner. Methods: Multiple point dose measurements were obtained with high-accuracy Thimble ionization chambers placed inside the stomach, liver, paravertebral gutter, ascending colon, left kidney, and urinary bladder of a human cadaver (183 cm in height and 67.5 kg in weight) whose abdomen/pelvis region was scanned repeatedly with a multidetector row CT. The flat energy response and precision of the dosimeters were verified, and the slight differences in each dosimeter's response were evaluated and corrected to attain high accuracy. In addition, skin doses were measured for radiosensitive organs outside the scanned region with OSL dosimeters: the right eye, thyroid, both nipples, and the right testicle. Three scan protocols were used, which shared most scan parameters but had different kVp and mA settings: 120-kVp automA, 120-kVp 300 mA, and 100-kVp 300 mA. For each protocol three repeated scans were performed. Results: The tube starting angle (TSA) was found to randomly vary around two major conditions, which caused large fluctuations in the repeated point dose measurements: for the 120-kVp 300 mA protocol this angle changed from approximately 110° to 290°, and caused 8% − 25% difference in the point dose measured at the stomach, liver, colon, and urinary bladder. When the fluctuations of the TSA were small (within 5°), the maximum coefficient of variance was approximately 3.3%. The soft tissue absorbed doses averaged from four locations near the center of the scanned region were 27.2 ± 3.3 and 16.5 ± 2.7 mGy for the 120 and 100-kVp fixed-mA scans, respectively. These values were consistent with the corresponding size specific dose estimates within 4%. The comparison of the per-100-mAs tissue doses from the three protocols revealed that: (1) dose levels at nonsuperficial locations in the TCM scans could not be accurately deduced by simply scaling

  15. Re-scan confocal microscopy: scanning twice for better resolution.

    Science.gov (United States)

    De Luca, Giulia M R; Breedijk, Ronald M P; Brandt, Rick A J; Zeelenberg, Christiaan H C; de Jong, Babette E; Timmermans, Wendy; Azar, Leila Nahidi; Hoebe, Ron A; Stallinga, Sjoerd; Manders, Erik M M

    2013-01-01

    We present a new super-resolution technique, Re-scan Confocal Microscopy (RCM), based on standard confocal microscopy extended with an optical (re-scanning) unit that projects the image directly on a CCD-camera. This new microscope has improved lateral resolution and strongly improved sensitivity while maintaining the sectioning capability of a standard confocal microscope. This simple technology is typically useful for biological applications where the combination high-resolution and high-sensitivity is required.

  16. Spatial correlation coefficient images for ultrasonic detection.

    Science.gov (United States)

    Cepel, Raina; Ho, K C; Rinker, Brett A; Palmer, Donald D; Lerch, Terrence P; Neal, Steven P

    2007-09-01

    In ultrasonics, image formation and detection are generally based on signal amplitude. In this paper, we introduce correlation coefficient images as a signal-amplitude independent approach for image formation. The correlation coefficients are calculated between A-scans digitized at adjacent measurement positions. In these images, defects are revealed as regions of high or low correlation relative to the background correlations associated with noise. Correlation coefficient and C-scan images are shown to demonstrate flat-bottom-hole detection in a stainless steel annular ring and crack detection in an aluminum aircraft structure.

  17. Lidar arc scan uncertainty reduction through scanning geometry optimization

    Directory of Open Access Journals (Sweden)

    H. Wang

    2015-10-01

    Full Text Available Doppler lidars are frequently operated in a mode referred to as arc scans, wherein the lidar beam scans across a sector with a fixed elevation angle and the resulting measurements are used to derive an estimate of the n minute horizontal mean wind velocity (speed and direction. Previous studies have shown that the uncertainty in the measured wind speed originates from turbulent wind fluctuations and depends on the scan geometry (the arc span and the arc orientation. This paper is designed to provide guidance on optimal scan geometries for two key applications in the wind energy industry: wind turbine power performance analysis and annual energy production. We present a quantitative analysis of the retrieved wind speed uncertainty derived using a theoretical model with the assumption of isotropic and frozen turbulence, and observations from three sites that are onshore with flat terrain, onshore with complex terrain and offshore, respectively. The results from both the theoretical model and observations show that the uncertainty is scaled with the turbulence intensity such that the relative standard error on the 10 min mean wind speed is about 30 % of the turbulence intensity. The uncertainty in both retrieved wind speeds and derived wind energy production estimates can be reduced by aligning lidar beams with the dominant wind direction, increasing the arc span and lowering the number of beams per arc scan. Large arc spans should be used at sites with high turbulence intensity and/or large wind direction variation when arc scans are used for wind resource assessment.

  18. Retinal locus for scanning text.

    Science.gov (United States)

    Timberlake, George T; Sharma, Manoj K; Grose, Susan A; Maino, Joseph H

    2006-01-01

    A method of mapping the retinal location of text during reading is described in which text position is plotted cumulatively on scanning laser ophthalmoscope retinal images. Retinal locations that contain text most often are the brightest in the cumulative plot, and locations that contain text least often are the darkest. In this way, the retinal area that most often contains text is determined. Text maps were plotted for eight control subjects without vision loss and eight subjects with central scotomas from macular degeneration. Control subjects' text maps showed that the fovea contained text most often. Text maps of five of the subjects with scotomas showed that they used the same peripheral retinal area to scan text and fixate. Text maps of the other three subjects with scotomas showed that they used separate areas to scan text and fixate. Retinal text maps may help evaluate rehabilitative strategies for training individuals with central scotomas to use a particular retinal area to scan text.

  19. Security scanning at 35 GHz

    Science.gov (United States)

    Anderton, Rupert N.; Appleby, Roger; Coward, Peter R.; Kent, P. J.; Price, Sean; Sinclair, Gordon N.; Wasley, Matthew R. M.

    2001-08-01

    It has been known for some time that millimeter waves can pas through clothing. In short range applications such as in the scanning of people for security purposes, operating at Ka band can be an advantage. The penetration through clothing is increased and the cost of the equipment when compared to operation at W band. In this paper a Ka band mechanically scanned imager designed for security scanning is discussed. This imager is based on the folded conical scan technology previously reported. It is constructed from low cost materials such as polystyrene and printed circuit board. The trade off between image spatial resolution and the number of receivers will be described and solutions, which minimize this number discussed.

  20. Scanning Gate Spectroscopy on Nanoclusters

    OpenAIRE

    Gurevich, L.; Canali, L.; Kouwenhoven, L.P.

    1999-01-01

    A gated probe for scanning tunnelling microscopy (STM) has been developed. The probe extends normal STM operations by means of an additional electrode fabricated next to the tunnelling tip. The extra electrode does not make contact with the sample and can be used as a gate. We report on the recipe used for fabricating the tunnelling tip and the gate electrode on a silicon nitride cantilever. We demonstrate the functioning of the scanning gate probes by performing single-electron tunnelling sp...

  1. Electrostatic ion beam scanning system

    Energy Technology Data Exchange (ETDEWEB)

    Harper, G.C.; Curtis, W.D.

    1978-04-01

    An electrostatic scanning system has been designed and built to uniformly implant a 1 cm/sup 2/ sample with a charged particle beam. The full angular scan capability for a 2 MeV beam is 0.5 degrees at 6 kV p-p. The design of the system is extremely simple so it is very compact, easy to operate, and has shown very good reliability.

  2. Comparison of 2 A-scans.

    Science.gov (United States)

    Norrby, Sverker; Lydahl, Eva; Koranyi, Gabor; Taube, Mikaela

    2003-01-01

    To compare 2 A-scan instruments with regard to differences in measured results for the same patient sample. St. Erik's Eye Hospital, Stockholm, Sweden. In a study to evaluate the lens-haptic plane concept of intraocular lens (IOL) power calculation, 148 patients eligible for cataract surgery were measured with 2 different A-scan instruments (BVI Axis and Sonomed 1500). The axial length (AL), anterior chamber depth (ACD), and lens thickness (LT) results were analyzed for systematic differences and random errors. The Sonomed 1500 measured systematically longer than the BVI Axis for AL (0.41 mm) and ACD (0.28 mm), although the correlation was good (r = 0.99 and r = 0.87, respectively). The LT correlated poorly (r = 0.18) and showed no systematic trend. The relative random errors (standard deviations) in ACD (7.2%) and LT (18.6%) were larger than that of the AL (0.8%). The systematic difference in the AL corresponds to a 1.0 diopter difference in the A-constant. The large random errors in the ACD and LT reduce their value as predictors of postoperative IOL position in formulas that use them. Systematic differences in AL can be large enough to require separate formula constants for different pieces of equipment. If this is the situation in 1 setting, there is a risk of mistakes. This confusion could be avoided if there were an agreed standard and a universal calibration procedure for instruments intended for AL measurement.

  3. The boundary-scan handbook

    CERN Document Server

    Parker, Kenneth P

    2016-01-01

    Aimed at electronics industry professionals, this 4th edition of the Boundary Scan Handbook describes recent changes to the IEEE1149.1 Standard Test Access Port and Boundary-Scan Architecture. This updated edition features new chapters on the possible effects of the changes on the work of the practicing test engineers and the new 1149.8.1 standard. Anyone needing to understand the basics of boundary scan and its practical industrial implementation will need this book. Provides an overview of the recent changes to the 1149.1 standard and the effect of the changes on the work of test engineers;   Explains the new IEEE 1149.8.1 subsidiary standard and applications;   Describes the latest updates on the supplementary IEEE testing standards. In particular, addresses: IEEE Std 1149.1                      Digital Boundary-Scan IEEE Std 1149.4                      Analog Boundary-Scan IEEE Std 1149.6                      Advanced I/O Testing IEEE Std 1149.8.1           �...

  4. Micromachined microscanners for optical scanning

    Science.gov (United States)

    Kiang, Meng-Hsiung; Solgaard, Olav; Muller, Richard S.; Lau, Kam Y.

    1997-04-01

    We present the design and fabrication of surface- micromachined electrostatic-comb driven microscanners that have high angular precision over a large scan angle. When used as resonant scanners, these mirrors have fast scan rates with very low operating power. We use polysilicon microhinges, which allow the micromirrors to be lifted out of the plane of the substrate after processing is completed, to create high-aspect-ratio optical surfaces with dimensions in the hundreds of micrometers s while taking advantage of the planar surface-micromachining processing technology. Microscanners that are capable of high-speed scanning over large scan angles with high precision have been fabricated. Application of these actuated micromirrors in laser barcode scanning and optical-fiber switches have been demonstrated. These single-mirror scanners can be combined to form more complicated microscanners such as a two-mirror, two-axis raster scanner that have a wide range of applications in areas such as medicine, displays, printing, data storage, and communications.

  5. Differential scanning calorimetry and fluorimetry measurements of monoclonal antibodies and reference proteins: Effect of scanning rate and dye selection.

    Science.gov (United States)

    Lang, Brian E; Cole, Kenneth D

    2017-05-01

    Differential scanning calorimetry (DSC) and differential scanning fluorimetry (DSF) were used to measure the transition temperatures of four proteins: RNase A, invertase, rituximab, and the NISTmAb (NIST Reference Material, RM 8671). The proteins were combined with several different fluorescent dyes for the DSF measurements. This study compares the results of DSC and DSF measurements of transition temperatures with different types of proteins, dye combinations, and thermal scan rates. As protein unfolding is often influenced by kinetic effects, we measured the transition temperatures of the proteins using DSC over a range of temperature scan rates and compared them to the data obtained from DSF over comparable temperature scan rates. The results when the proteins were combined with Sypro Orange(®) and bis-ANS for the DSF measurements had the best correlations with the transition temperatures determined by calorimetry. The scan rate was found to be an important variable when comparing results between DSC and DSF. The van't Hoff enthalpy changes for the transitions were calculated from the DSC data by using a non-two-state model and from the DSF values using a two-state model. The calculated van't Hoff enthalpy changes did not show a good correlation between the two methods. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:677-686, 2017. © 2017 American Institute of Chemical Engineers.

  6. Scintigraphic features of duplex kidneys on DMSA renal cortical scans.

    Science.gov (United States)

    Kwatra, Neha; Shalaby-Rana, Eglal; Majd, Massoud

    2013-09-01

    The spectrum of manifestations of duplex kidneys on (99m)Tc-dimercaptosuccinic acid (DMSA) renal cortical scans and correlating findings on other imaging modalities are presented. Relevant embryology of the duplex systems and technical aspects of DMSA scintigraphy are reviewed.

  7. Scanning Terahertz Heterodyne Imaging Systems

    Science.gov (United States)

    Siegel, Peter; Dengler, Robert

    2007-01-01

    Scanning terahertz heterodyne imaging systems are now at an early stage of development. In a basic scanning terahertz heterodyne imaging system, (see Figure 1) two far-infrared lasers generate beams denoted the local-oscillator (LO) and signal that differ in frequency by an amount, denoted the intermediate frequency (IF), chosen to suit the application. The LO beam is sent directly to a mixer as one of two inputs. The signal beam is focused to a spot on or in the specimen. After transmission through or reflection from the specimen, the beams are focused to a spot on a terahertz mixer, which extracts the IF outputs. The specimen is mounted on a translation stage, by means of which the focal spot is scanned across the specimen to build up an image.

  8. Scanning probe microscopy competency development

    Energy Technology Data Exchange (ETDEWEB)

    Hawley, M.E.; Reagor, D.W.; Jia, Quan Xi [and others

    1998-12-31

    This is the final report of a three-year, Laboratory Directed Research and Development (LDRD) project at Los Alamos National Laboratory (LANL). The project collaborators developed an ultra-high vacuum scanning tunneling microscope (UHV-STM) capability, integrated it with existing scanning probe microscopes, and developed new, advanced air-based scanning force techniques (SPMs). Programmatic, basic, and industrially related laboratory research requires the existence of SPMs, as well as expertise capable of providing local nano-scale information. The UHV-STM capability, equipped with load-lock system and several surface science techniques, will allow introduction, examination, and reaction of surfaces prepared under well-controlled vacuum conditions, including the examination of morphology and local bonding associated with the initial stages of film growth under controlled growth conditions. The resulting capabilities will enable the authors to respond to a variety of problems requiring local characterization of conducting and nonconducting surfaces in liquids, air, and UHV.

  9. Footwear scanning systems and methods

    Energy Technology Data Exchange (ETDEWEB)

    Fernandes, Justin L.; McMakin, Douglas L.; Sheen, David M.; Tedeschi, Jonathan R.

    2017-07-25

    Methods and apparatus for scanning articles, such as footwear, to provide information regarding the contents of the articles are described. According to one aspect, a footwear scanning system includes a platform configured to contact footwear to be scanned, an antenna array configured to transmit electromagnetic waves through the platform into the footwear and to receive electromagnetic waves from the footwear and the platform, a transceiver coupled with antennas of the antenna array and configured to apply electrical signals to at least one of the antennas to generate the transmitted electromagnetic waves and to receive electrical signals from at least another of the antennas corresponding to the electromagnetic waves received by the others of the antennas, and processing circuitry configured to process the received electrical signals from the transceiver to provide information regarding contents within the footwear.

  10. Nanobits: customizable scanning probe tips

    DEFF Research Database (Denmark)

    Kumar, Rajendra; Shaik, Hassan Uddin; Sardan Sukas, Özlem

    2009-01-01

    silicon processing. Using a microgripper they were detached from an array and fixed to a standard pyramidal AFM probe or alternatively inserted into a tipless cantilever equipped with a narrow slit. The nanobit-enhanced probes were used for imaging of deep trenches, without visible deformation, wear......We present here a proof-of-principle study of scanning probe tips defined by planar nanolithography and integrated with AFM probes using nanomanipulation. The so-called 'nanobits' are 2-4 mu m long and 120-150 nm thin flakes of Si3N4 or SiO2, fabricated by electron beam lithography and standard...... or dislocation of the tips of the nanobit after several scans. This approach allows an unprecedented freedom in adapting the shape and size of scanning probe tips to the surface topology or to the specific application....

  11. Security scanning at 94GHz

    Science.gov (United States)

    Anderton, Rupert N.; Appleby, Roger; Beale, John E.; Coward, Peter R.; Price, Sean

    2006-05-01

    It is well known that millimetre waves can pass through clothing. In short range applications such as in the scanning of people for security purposes, operating at W band can be an advantage. The size of the equipment is decreased when compared to operation at Ka band and the equipments have similar performance. In this paper a W band mechanically scanned imager designed for imaging weapons and contraband hidden under clothing is discussed. This imager is based on a modified folded conical scan technology previously reported. In this design an additional optical element is added to give a Cassegrain configuration in image space. This increases the effective focal length and enables improved sampling of the image and provides more space for the receivers. This imager is constructed from low cost materials such as polystyrene, polythene and printed circuit board materials. The trade off between image spatial resolution and thermal sensitivity is discussed.

  12. Calculation of Uniform of Beam Scanning

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    For the electron beam application, it is always scanned by a dipole magnet. The uniform of the scanning has great influence for some application, such as the irradiation of the thyristor. There are two methods for improving the scanning uniform:

  13. Score Correlation

    OpenAIRE

    Fabián, Z. (Zdeněk)

    2010-01-01

    In this paper, we study a distribution-dependent correlation coefficient based on the concept of scalar score. This new measure of association of continuous random variables is compared by means of simulation experiments with the Pearson, Kendall and Spearman correlation coefficients.

  14. High precision prism scanning system

    Science.gov (United States)

    García-Torales, G.; Flores, J. L.; Muñoz, Roberto X.

    2007-03-01

    Risley prisms are commonly used in continuous scanning manner. Each prism is capable of rotating separately about a common axis at different speeds. Scanning patterns are determined by the ratios of the wedge angles, the speed and direction of rotation of both prisms. The use of this system is conceptually simple. However, mechanical action in most applications becomes a challenge often solved by the design of complex control algorithms. We propose an electronic servomotor system that controls incremental and continuous rotations of the prisms wedges by means of an auto-tuning PID control using a Adaline Neural Network Algorithm, NNA.

  15. Technetium phosphate bone scan in the diagnosis of septic arthritis in childhood

    Energy Technology Data Exchange (ETDEWEB)

    Sundberg, S.B.; Savage, J.P.; Foster, B.K. (Adelaide Childrens Hospital (Australia))

    1989-09-01

    The technetium phosphate bone scans of 106 children with suspected septic arthritis were reviewed to determine whether the bone scan can accurately differentiate septic from nonseptic arthropathy. Only 13% of children with proved septic arthritis had correct blind scan interpretation. The clinically adjusted interpretation did not identify septic arthritis in 30%. Septic arthritis was incorrectly identified in 32% of children with no evidence of septic arthritis. No statistically significant differences were noted between the scan findings in the septic and nonseptic groups and no scan findings correlated specifically with the presence or absence of joint sepsis.

  16. Localizing Test Power Consumption for Scan Testing

    Institute of Scientific and Technical Information of China (English)

    XIANG Dong; LI Kai-wei

    2005-01-01

    A two stage scan architecture is proposed to do low powerand low test application cost scan testing. The first stage includes multiple scan chains, where each scan chain is driven by a primary input. Each scan flip-flop in the multiple scan chains drives a group of scan flip-flops. The scan flip-flop in the multiple scan chain and the scan flipflop driven by it are assigned the same values for all test vectors. Scan flip-flops in the multiple scan chains and those in the second stage use separate clock signals, but the design for testability technqiue needs only one clock. The proposed scan architecture localizes test power consumption to the multiple scan chains during test application. Test signals assigned to scan flip-flops in the multiple scan chains are applied to the scan flip-flops in the second stage after the test vector has been applied to the multiple scan chains. This technique can make test power consumption very small.

  17. High Resolution Scanning Ion Microscopy

    NARCIS (Netherlands)

    Castaldo, V.

    2011-01-01

    The structure of the thesis is the following. The first chapter is an introduction to scanning microscopy, where the path that led to the Focused Ion Beam (FIB) is described and the main differences between electrons and ion beams are highlighted. Chapter 2 is what is normally referred to (which I d

  18. Introduction to scanning tunneling microscopy

    CERN Document Server

    Chen, C Julian

    2008-01-01

    The scanning tunneling and the atomic force microscope, both capable of imaging individual atoms, were crowned with the Physics Nobel Prize in 1986, and are the cornerstones of nanotechnology today. This is a thoroughly updated version of this 'bible' in the field.

  19. Broadband antenna with frequency scanning

    Directory of Open Access Journals (Sweden)

    A. A. Shekaturin

    2014-06-01

    Full Text Available Relevance of this study. The main advantage of frequency scanning is simplicity of implementation. At this point, multifunctional usage of microwave modules is an urgent task, as well as their maximum simpler and cheaper. Antenna design and operation. The study is aimed at providing electric antenna with frequency scanning. It was based on the log-periodic antenna due to its wideband and negotiation capability over the entire operating frequency range. For this distribution line is bent in an arc of a circle in a plane blade while vibrators are arranged along the radius. Computer modeling of antennas with frequency scanning. Modeled with a non-mechanical motion antenna beam emitters representing system for receiving a radio frequency signal on mobile objects calculated for 1.8 GHz ... 4.2 GHz. The simulation was performed in a software environment for numerical modeling of electromagnetic «Feko 5.5». Analysis of the interaction of radiation is based on the method of moments. Findings. The result of this work is to propose a new design of the antenna with a frequency scanning method as agreed in a wide frequency range. In the studied technical solution provided by the rotation of NAM in the frequency range, and the matching of the antenna to the feed line is maintained. Application of this type of antennas on the proposed technical solution in communication systems will improve the communication reliability by maintaining coordination in the frequency range

  20. Technical aspects of CT scanning.

    Science.gov (United States)

    Maravilla, K R; Pastel, M S

    1978-01-01

    The advent of computed tomography (CT) has initiated a technological revolution which continues to the present time. A brief review of basic principles of CT scanning is presented, and the evolution of modern CT scanner systems is traced. Some early indications of future trends are also presented.

  1. Clinical CT signs identification of intractable seizures pancreatitis and pancreatic cancer%顽固发作性胰腺炎与胰腺癌的临床CT征象鉴别性探究

    Institute of Scientific and Technical Information of China (English)

    张宇; 曹文广; 张世衡; 苏宝珠

    2015-01-01

    目的:探讨顽固发作性胰腺炎与胰腺癌的临床CT征象鉴别诊断。方法回顾性分析胰腺癌患者30例以及顽固发作性胰腺炎患者30例的临床资料和CT影像资料,分析临床CT征象特征。结果胰腺CT影像学结果显示,两组胰腺密度异常、胰管扩张比例无显著差异(P>0.05);胰腺癌主要表现为胰腺局限性增大,反复发作胰腺炎组主要表现为胰腺弥漫性增大,差异有统计学意义(P0.05); The performance of pancreatic cancer CT signs showed the volume of the pancreas increased limitedly, and the volume of the intractable seizures pancreatitis increased widespread(P<0.01);there was one case of pancreatic cancer through the pancreatic duct dilatation lesions,but 11 cases of intractable seizures pancreatitis group(P<0.01). CT enhancement re-sults showed that, pancreatic cancer group was lumps or nodules continued weak strengthening, and intractable seizures pancreatitis was non-mass type heterogeneous enhancement (P<0.01). Conclusion CT signs of intractable seizures pancreatitis and pancreatic cancer are different. Especially enhanced scan can provide the basis for the identi-fication of the two.

  2. A study of the short- to long-phantom dose ratios for CT scanning without table translation

    Energy Technology Data Exchange (ETDEWEB)

    Li, Xinhua; Zhang, Da; Liu, Bob, E-mail: bliu7@mgh.harvard.edu [Division of Diagnostic Imaging Physics, Department of Radiology, Massachusetts General Hospital, Boston, Massachusetts 02114 and Webster Center for Advanced Research and Education in Radiation, Department of Radiology, Massachusetts General Hospital, Boston, Massachusetts 02114 (United States); Yang, Jie [Pinnacle Health - Fox Chase Regional Cancer Center, Harrisburg, Pennsylvania 17109 (United States)

    2014-09-15

    Purpose: For CT scanning in the stationary-table modes, AAPM Task Group 111 proposed to measure the midpoint dose on the central and peripheral axes of sufficiently long phantoms. Currently, a long cylindrical phantom is usually not available in many clinical facilities. The use of a long phantom is also challenging because of the heavy weight. In order to shed light on assessing the midpoint dose in CT scanning without table movement, the authors present a study of the short- to long-phantom dose ratios, and perform a cross-comparison of CT dose ratios on different scanner models. Methods: The authors performed Geant4-based Monte Carlo simulations with a clinical CT scanner (Somatom Definition dual source CT, Siemens Healthcare), and modeled dosimetry measurements using a 0.6 cm{sup 3} Farmer type chamber and a 10-cm long pencil ion chamber. The short (15 cm) to long (90 cm) phantom dose ratios were computed for two PMMA diameters (16 and 32 cm), two phantom axes (the center and the periphery), and a range of beam apertures (3–25 cm). The results were compared with the published data of previous studies with other multiple detector CT (MDCT) scanners and cone beam CT (CBCT) scanners. Results: The short- to long-phantom dose ratios changed with beam apertures but were insensitive to beam qualities (80–140 kV, the head and body bowtie filters) and MDCT and CBCT scanner models. Conclusions: The short- to long-phantom dose ratios enable medical physicists to make dosimetry measurements using the standard CT dosimetry phantoms and a Farmer chamber or a 10 cm long pencil chamber, and to assess the midpoint dose in long phantoms. This method provides an effective approach for the dosimetry of CBCT scanning in the stationary-table modes, and is useful for perfusion and interventional CT.

  3. Psychophysics of prosthetic vision: I. Visual scanning and visual acuity.

    Science.gov (United States)

    Chen, S C; Hallum, L E; Suaning, G J; Lovell, N H

    2006-01-01

    Recipients of vision prosthesis prototypes have reported electrically elicited visual perceptions as discrete dots of light (phosphenes). Phosphenes construct the scenery in discontinuous small isolated patches, resulting in visual information deficit to a large portion of the visual field. Visual scanning therefore plays an important role in the utility of prosthetic vision. In a psychophysical study, normally sighted subjects undertook a visual acuity task in a simulation of prosthetic vision with scanning facilitated by head movements. Subjects who adopted the circular scanning technique (4/12) correctly identified >60% of the test items, compared to subjects with no particular scanning patterns (3/12) with <50%. Increased head movement velocity was correlated to increased performance; at optimal scanning velocities, we estimated a 50% increase in identification rate or a two-fold improvement in visual acuity threshold compared to otherwise complete lack of scanning movement. Improved performance likely resulted from positive interactions with the temporal processes of the human visual system, which may as much as double the spatial information of that originally afforded by the phosphene lattice.

  4. Control on Electron Beam Scanning Track

    Institute of Scientific and Technical Information of China (English)

    王学东; 姚舜

    2004-01-01

    In order to use electron beam as a movable welding heat source and whose energy distribution along its moving trace can be controlled, a method of electron beam scanning track and scanning mode control was put forward. Based on it, the electron beam scanning track and scanning mode can be edited at will according to actual requirements, and the energy input of each point of the scanning track can be controlled. In addition, the scanning frequency and points control, real time adjusting of the scanning track etc. were explained. This method can be used in electron beam brazing, surface modification, surface heat treatment etc.

  5. Incorporating geometric and radiative effects into infrared scanning computer analysis

    Science.gov (United States)

    Myrick, D. L.; Kantsios, A. G.

    1983-01-01

    A NASA program, the SILTS experiment (Shuttle Infrared Leeside Temperature Sensing) will utilize an infrared scanning system mounted at the tip of the vertical stabilizer to remotely measure the surface temperature of the leeside of the Space Shuttle during entry from orbit. Scans of the fuselage and one wing will be made alternately. The experiment will correlate real full scale data to ground-based information. In order to quantitatively assess the temperature profile of the surface, an algorithm is required which incorporates the Space Shuttle shape, location of specific materials on the surface, and the measurement geometry between the camera and the surface. This paper will discuss the algorithm.

  6. Seismic scanning tunneling macroscope - Theory

    KAUST Repository

    Schuster, Gerard T.

    2012-09-01

    We propose a seismic scanning tunneling macroscope (SSTM) that can detect the presence of sub-wavelength scatterers in the near-field of either the source or the receivers. Analytic formulas for the time reverse mirror (TRM) profile associated with a single scatterer model show that the spatial resolution limit to be, unlike the Abbe limit of λ/2, independent of wavelength and linearly proportional to the source-scatterer separation as long as the point scatterer is in the near-field region; if the sub-wavelength scatterer is a spherical impedance discontinuity then the resolution will also be limited by the radius of the sphere. Therefore, superresolution imaging can be achieved as the scatterer approaches the source. This is analogous to an optical scanning tunneling microscope that has sub-wavelength resolution. Scaled to seismic frequencies, it is theoretically possible to extract 100 Hz information from 20 Hz data by imaging of near-field seismic energy.

  7. A Laser Scanning Tracking Method

    Science.gov (United States)

    Xu, Gaoyue; Hu, Baoli; Wang, Jiangping

    1988-04-01

    In this paper, a new tracking approach, a laser scanning tracking method (LSTM) is proposed. The LSTM has been designed to track a cylindrical retroreflective target mounted on the object, which makes plane motion. The retroreflector pasted by scotchlite reflective sheeting (mad. in 3M ,0.) i s located by scanning a laser beam in holizontal. When the retroreflector is struck, its position that is azimuth is read by microcomputer and the aiming device is servocontrolled by microcomputer according to this azimuth immediately. This is a step-by-step tracking method. The time of servo-reponse is less than one millisecona in actual tests. The angular accuracy is less than 0.5 milliradian. The track angular velocity is greater than one radian/second.

  8. Monte-Carlo scatter correction for cone-beam computed tomography with limited scan field-of-view

    Science.gov (United States)

    Bertram, Matthias; Sattel, Timo; Hohmann, Steffen; Wiegert, Jens

    2008-03-01

    In flat detector cone-beam computed tomography (CBCT), scattered radiation is a major source of image degradation, making accurate a posteriori scatter correction inevitable. A potential solution to this problem is provided by computerized scatter correction based on Monte-Carlo simulations. Using this technique, the detected distributions of X-ray scatter are estimated for various viewing directions using Monte-Carlo simulations of an intermediate reconstruction. However, as a major drawback, for standard CBCT geometries and with standard size flat detectors such as mounted on interventional C-arms, the scan field of view is too small to accommodate the human body without lateral truncations, and thus this technique cannot be readily applied. In this work, we present a novel method for constructing a model of the object in a laterally and possibly also axially extended field of view, which enables meaningful application of Monte-Carlo based scatter correction even in case of heavy truncations. Evaluation is based on simulations of a clinical CT data set of a human abdomen, which strongly exceeds the field of view of the simulated C-arm based CBCT imaging geometry. By using the proposed methodology, almost complete removal of scatter-caused inhomogeneities is demonstrated in reconstructed images.

  9. Differential scanning calorimetry of coal

    Science.gov (United States)

    Gold, P. I.

    1978-01-01

    Differential scanning calorimetry studies performed during the first year of this project demonstrated the occurrence of exothermic reactions associated with the production of volatile matter in or near the plastic region. The temperature and magnitude of the exothermic peak were observed to be strongly affected by the heating rate, sample mass and, to a lesser extent, by sample particle size. Thermal properties also were found to be influenced by oxidation of the coal sample due to weathering effects.

  10. Cloud Top Scanning radiometer (CTS)

    Science.gov (United States)

    1978-01-01

    A scanning radiometer to be used for measuring cloud radiances in each of three spectral regions is described. Significant features incorporated in the Cloud Top Scanner design are: (1) flexibility and growth potential through use of easily replaceable modular detectors and filters; (2) full aperture, multilevel inflight calibration; (3) inherent channel registration through employment of a single shared field stop; and (4) radiometric sensitivity margin in a compact optical design through use of Honeywell developed (Hg,Cd)Te detectors and preamplifiers.

  11. 3D scanning with Kinect

    OpenAIRE

    Novak, David

    2012-01-01

    This paper describes the procedures and technologies used for scanning and three-dimensional reconstruction of objects using the optical scanner Kinect. Theoretical backgrounds of basic computer graphics, projective geometry, optics and graphical reconstruction were studied for better understanding of this field of computer science. A part of the content also describes the structure and operating of the Kinect and is used as a theoretical basis for implementing a new framework for three-di...

  12. New Snail Mail Scanning Service

    CERN Multimedia

    2012-01-01

    Modernisation does not stop at the CERN postal service (GS/PS). “With more and more digitisation and the prevalence of e-mail throughout the site, we were hoping to provide more timely delivery of letters and make further saving in resources”, said Tueri Datta, head of GS/PS.   Instead of the standard delivery to your P.O. box, the CERN postal service will digitally scan all letters and books up to 100 pages on reception. These scans will subsequently be sent via e-mail to the corresponding recipient as PDF (Portable Data Format - you will need to install “Acrobat Reader” on your PC). Express mail will be handled with priority. Users without a valid CERN mailbox can register at mail.scan.service@cern.ch in order to have their letters read to them via the phone line (we are currently investigating whether we can use the voices of the last five DGs).   This service will start on 1st April 2012 on the Meyrin site and will gradually replace th...

  13. Accuracy of laser-scanned models compared to plaster models and cone-beam computed tomography.

    Science.gov (United States)

    Kim, Jooseong; Heo, Giseon; Lagravère, Manuel O

    2014-05-01

    To compare the accuracy of measurements obtained from the three-dimensional (3D) laser scans to those taken from the cone-beam computed tomography (CBCT) scans and those obtained from plaster models. Eighteen different measurements, encompassing mesiodistal width of teeth and both maxillary and mandibular arch length and width, were selected using various landmarks. CBCT scans and plaster models were prepared from 60 patients. Plaster models were scanned using the Ortho Insight 3D laser scanner, and the selected landmarks were measured using its software. CBCT scans were imported and analyzed using the Avizo software, and the 26 landmarks corresponding to the selected measurements were located and recorded. The plaster models were also measured using a digital caliper. Descriptive statistics and intraclass correlation coefficient (ICC) were used to analyze the data. The ICC result showed that the values obtained by the three different methods were highly correlated in all measurements, all having correlations>0.808. When checking the differences between values and methods, the largest mean difference found was 0.59 mm±0.38 mm. In conclusion, plaster models, CBCT models, and laser-scanned models are three different diagnostic records, each with its own advantages and disadvantages. The present results showed that the laser-scanned models are highly accurate to plaster models and CBCT scans. This gives general clinicians an alternative to take into consideration the advantages of laser-scanned models over plaster models and CBCT reconstructions.

  14. Gallium-67 scanning at 6 hr in active inflammatory bowel disease: case report

    Energy Technology Data Exchange (ETDEWEB)

    Kaplan, L.R.; Griep, R.J.; Schuffler, M.D.; Silliman, R.A.

    1977-05-01

    Gallium citrate scanning at 6 hr was used to evaluate a patient with active ulcerative colitis. The localization of /sup 67/Ga in the colon correlated with the extent of the inflammatory process. When either colonoscopy or radiographic contrast studies are contraindicated, /sup 67/Ga scanning at 6 hr may prove useful in the evaluation of active inflammatory bowel disease.

  15. Correlator technology

    NARCIS (Netherlands)

    Schooneveld, C. van

    1968-01-01

    The paper reviews a number of designs of cross-correlation receivers for the detection of active underwater transmissions. Particular attention is given to the various structures of phase insensitive receivers, and to the problems concerned with clipping of the input signal and the reference functio

  16. An automatic approach for 3D registration of CT scans

    Science.gov (United States)

    Hu, Yang; Saber, Eli; Dianat, Sohail; Vantaram, Sreenath Rao; Abhyankar, Vishwas

    2012-03-01

    CT (Computed tomography) is a widely employed imaging modality in the medical field. Normally, a volume of CT scans is prescribed by a doctor when a specific region of the body (typically neck to groin) is suspected of being abnormal. The doctors are required to make professional diagnoses based upon the obtained datasets. In this paper, we propose an automatic registration algorithm that helps healthcare personnel to automatically align corresponding scans from 'Study' to 'Atlas'. The proposed algorithm is capable of aligning both 'Atlas' and 'Study' into the same resolution through 3D interpolation. After retrieving the scanned slice volume in the 'Study' and the corresponding volume in the original 'Atlas' dataset, a 3D cross correlation method is used to identify and register various body parts.

  17. An Adaptive Algorithm to Detect Port Scans

    Institute of Scientific and Technical Information of China (English)

    单蓉胜; 李小勇; 李建华

    2004-01-01

    Detection of port scan is an important component in a network intrusion detection and prevention system. Traditional statistical methods can be easily evaded by stealthy scans and are prone to DeS attacks. This paper presents a new mechanism termed PSD(port scan detection), which is based on TCP packet anomaly evaluation. By learning the port distribution and flags of TCP packets arriving at the protected hosts, PSD can compute the anomaly score of each packet and effectively detect port scans including slow scans and stealthy scans. Experiments show that PSD has high detection accuracy and low detection latency.

  18. Aperture scanning Fourier ptychographic microscopy

    Science.gov (United States)

    Ou, Xiaoze; Chung, Jaebum; Horstmeyer, Roarke; Yang, Changhuei

    2016-01-01

    Fourier ptychographic microscopy (FPM) is implemented through aperture scanning by an LCOS spatial light modulator at the back focal plane of the objective lens. This FPM configuration enables the capturing of the complex scattered field for a 3D sample both in the transmissive mode and the reflective mode. We further show that by combining with the compressive sensing theory, the reconstructed 2D complex scattered field can be used to recover the 3D sample scattering density. This implementation expands the scope of application for FPM and can be beneficial for areas such as tissue imaging and wafer inspection. PMID:27570705

  19. ABS: Sequence alignment by scanning

    KAUST Repository

    Bonny, Mohamed Talal

    2011-08-01

    Sequence alignment is an essential tool in almost any computational biology research. It processes large database sequences and considered to be high consumers of computation time. Heuristic algorithms are used to get approximate but fast results. We introduce fast alignment algorithm, called Alignment By Scanning (ABS), to provide an approximate alignment of two DNA sequences. We compare our algorithm with the well-known alignment algorithms, the FASTA (which is heuristic) and the \\'Needleman-Wunsch\\' (which is optimal). The proposed algorithm achieves up to 76% enhancement in alignment score when it is compared with the FASTA Algorithm. The evaluations are conducted using different lengths of DNA sequences. © 2011 IEEE.

  20. Scanning Miniature Microscopes without Lenses

    Science.gov (United States)

    Wang, Yu

    2009-01-01

    The figure schematically depicts some alternative designs of proposed compact, lightweight optoelectronic microscopes that would contain no lenses and would generate magnified video images of specimens. Microscopes of this type were described previously in Miniature Microscope Without Lenses (NPO - 20218), NASA Tech Briefs, Vol. 22, No. 8 (August 1998), page 43 and Reflective Variants of Miniature Microscope Without Lenses (NPO 20610), NASA Tech Briefs, Vol. 26, No. 9 (September 1999), page 6a. To recapitulate: In the design and construction of a microscope of this type, the focusing optics of a conventional microscope are replaced by a combination of a microchannel filter and a charge-coupled-device (CCD) image detector. Elimination of focusing optics reduces the size and weight of the instrument and eliminates the need for the time-consuming focusing operation. The microscopes described in the cited prior articles contained two-dimensional CCDs registered with two-dimensional arrays of microchannels and, as such, were designed to produce full two-dimensional images, without need for scanning. The microscopes of the present proposal would contain one-dimensional (line image) CCDs registered with linear arrays of microchannels. In the operation of such a microscope, one would scan a specimen along a line perpendicular to the array axis (in other words, one would scan in pushbroom fashion). One could then synthesize a full two-dimensional image of the specimen from the line-image data acquired at one-pixel increments of position along the scan. In one of the proposed microscopes, a beam of unpolarized light for illuminating the specimen would enter from the side. This light would be reflected down onto the specimen by a nonpolarizing beam splitter attached to the microchannels at their lower ends. A portion of the light incident on the specimen would be reflected upward, through the beam splitter and along the microchannels, to form an image on the CCD. If the

  1. Preoperative CT scanning of 70 cases of rheumatic valvular disease

    Energy Technology Data Exchange (ETDEWEB)

    Take, Akira; Matuzaki, Shigeru; Oki, Shinichi (Jichi Medical School, Minamikawachi, Tochigi (Japan)) (and others)

    1992-05-01

    Seventy patients with rheumatic valvular disease were evaluated with preoperative CT scanning. The correlation of the obtained CT images to the operative findings were examined. Left atrial thrombi were found in 24 cases at the operation. CT scan had detected thrombi in 19 cases (79.2%) and echocardiography in 15 (62.5%). CT failed to find them in 5 cases in which the left atrial thrombi were less than 3 g. Echocardiogram, however, failed to detect thrombi in 9 cases, the largest being 14 g. There were 15 cases with left atrial calcification, in which 10 cases had left atrial thrombi. Nine cases out of these 10 cases had rough left atrial surface after thrombectomy. Early postoperative CT of 10 with left atrial calcification showed recurrent left atrial thrombi in 4 (40%) cases. Mitral valve calcification was found in 42 cases during operation. CT scan was able to detect it in 40 (95.2%), while echocardiogram detected in 34 cases (81.0%) (p<0.05). All mitral valves with calcification required replacement. Out of 30 cases with non calcified mitral valves, 9 underwent OMC, and the other 21 underwent mitral valve replacement. Aortic valve calcification was found in 9 out of 11 cases of aortic stenosis. All has been diagnosed by CT scan. In conclusion, 1. in detecting the left atrial thrombi, CT scan was superior to echo-cardiography, and provided useful information for planning the operative procedure including atrial approach and valvular manipulation, 2. CT scan could detect calcification of left atrial wall which had high incidence of thrombus formation and rough left atrial surface, 3. CT scan could detect calcification of both mitral and aortic valve, and showed the severity of valvular structural changes. (author).

  2. Electronically-Scanned Fourier-Transform Spectrometer

    Science.gov (United States)

    Breckinridge, J. B.; Ocallaghan, F. G.

    1984-01-01

    Instrument efficient, lightweight, and stable. Fourier-transform spectrometer configuration uses electronic, instead of mechanical, scanning. Configuration insensitive to vibration-induced sampling errors introduced into mechanically scanned systems.

  3. 3D Scanning technology for offshore purposes

    DEFF Research Database (Denmark)

    Christoffersen, Morten Thoft

    2005-01-01

    New scanning technology makes for construction of precision 3D models of production plants and offshore production facilities......New scanning technology makes for construction of precision 3D models of production plants and offshore production facilities...

  4. CDMP Scan Task Production Flow Sheets

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Climate Database Modernization Program contractor documentation of batches scanned. Details include the name of the operator, time/date of scans, duplicates,...

  5. Optical analysis of scanning microstereolithography systems

    Science.gov (United States)

    Deshmukh, Suhas P.; Dubey, Shashikant; Gandhi, P. S.

    2006-01-01

    Microstereolithography (MSL) is rapidly developing technique for micro-fabrication. Vector-by-vector scanning MSL has a potential to create true 3D micro-devices as compared to mostly planar (2D-2 1/2 D) devices fabricated by conventional MEMS techniques. Previous literature shows two different scanning methods:(1) Galvanomirror scanning, (2) Photoreactor tank scanning. Galvanomirror scanning technique has higher fabrication speed but poor resolution because of defocusing of laser spot on the resin surface. Photo-reactor tank scanning has higher resolution but produces a wavy structures and limited speed of fabrication. This paper proposes and develops an offaxis lens scanning technique for MSL and carries out optical analysis to compare its performance with the existing techniques mentioned above. The comparison clearly demonstrates improved performance with the proposed offaxis lens scanning technique.

  6. PRF Ambiguity Detrmination for Radarsat ScanSAR System

    Science.gov (United States)

    Jin, Michael Y.

    1998-01-01

    PRF ambiguity is a potential problem for a spaceborne SAR operated at high frequencies. For a strip mode SAR, there were several approaches to solve this problem. This paper, however, addresses PRF ambiguity determination algorithms suitable for a burst mode SAR system such as the Radarsat ScanSAR. The candidate algorithms include the wavelength diversity algorithm, range look cross correlation algorithm, and multi-PRF algorithm.

  7. SCANNING ELECTRON MICROSCOPY STUDY OF FILLED SILICONE RUBBER

    Institute of Scientific and Technical Information of China (English)

    LI Yufu; YANG Qiyun; LI Guangliang

    1988-01-01

    The fracture surfaces of a number of silicone vulcanizates were investigated by the use of scanning electron microscopy (SEM). It was found that the difference in the presence and absence of filler, the variation of its surface modification as well as the history of thermal aging of the vulcanizates, all of these factors made difference in surface morphology of the fractured surface. This was correlated with the strength of the vulcanizates. The reinforcing effect of filler and the process of fracture were discussed.

  8. Spatial Correlation Coefficient Images for Ultrasonic Detection (Preprint)

    Science.gov (United States)

    2006-07-01

    for image formation and detection based on the similarity of adjacent signals. Signal similarity is quantified in terms of the correlation coefficient calculated...between A-scans digitized at adjacent measurement positions. Correlation coefficient images are introduced for visualizing the similarity...beam field with the defect. Correlation coefficient and C-scan images are shown to demonstrate flat-bottom-hole detection in a stainless steel annular

  9. Correlation spectrometer

    Science.gov (United States)

    Sinclair, Michael B.; Pfeifer, Kent B.; Flemming, Jeb H.; Jones, Gary D.; Tigges, Chris P.

    2010-04-13

    A correlation spectrometer can detect a large number of gaseous compounds, or chemical species, with a species-specific mask wheel. In this mode, the spectrometer is optimized for the direct measurement of individual target compounds. Additionally, the spectrometer can measure the transmission spectrum from a given sample of gas. In this mode, infrared light is passed through a gas sample and the infrared transmission signature of the gasses present is recorded and measured using Hadamard encoding techniques. The spectrometer can detect the transmission or emission spectra in any system where multiple species are present in a generally known volume.

  10. Getting a CAT Scan (For Kids)

    Science.gov (United States)

    ... A Kid's Guide to Fever Getting a CAT Scan (Video) KidsHealth > For Kids > Getting a CAT Scan (Video) A A A en español Obtención de ... of what's going on inside your body. The scan itself is painless. All you'll need to ...

  11. Why Waveform Correlation Sometimes Fails

    Science.gov (United States)

    Carmichael, J.

    2015-12-01

    Waveform correlation detectors used in explosion monitoring scan noisy geophysical data to test two competing hypotheses: either (1) an amplitude-scaled version of a template waveform is present, or, (2) no signal is present at all. In reality, geophysical wavefields that are monitored for explosion signatures include waveforms produced by non-target sources that are partially correlated with the waveform template. Such signals can falsely trigger correlation detectors, particularly at low thresholds required to monitor for smaller target explosions. This challenge is particularly formidable when monitoring known test sites for seismic disturbances, since uncatalogued natural seismicity is (generally) more prevalent at lower magnitudes, and could be mistaken for small explosions. To address these challenges, we identify real examples in which correlation detectors targeting explosions falsely trigger on both site-proximal earthquakes (Figure 1, below) and microseismic "noise". Motivated by these examples, we quantify performance loss when applying these detectors, and re-evaluate the correlation-detector's hypothesis test. We thereby derive new detectors from more general hypotheses that admit unknown background seismicity, and apply these to real data. From our treatment, we derive "rules of thumb'' for proper template and threshold selection in heavily cluttered signal environments. Last, we answer the question "what is the probability of falsely detecting an earthquake collocated at a test site?", using correlation detectors that include explosion-triggered templates. Figure Top: An eight-channel data stream (black) recorded from an earthquake near a mine. Red markers indicate a detection. Middle: The correlation statistic computed by scanning the template against the data stream at top. The red line indicates the threshold for event declaration, determined by a false-alarm on noise probability constraint, as computed from the signal-absent distribution using

  12. Semiautomated three-dimensional segmentation software to quantify carpal bone volume changes on wrist CT scans for arthritis assessment.

    Science.gov (United States)

    Duryea, J; Magalnick, M; Alli, S; Yao, L; Wilson, M; Goldbach-Mansky, R

    2008-06-01

    Rapid progression of joint destruction is an indication of poor prognosis in patients with rheumatoid arthritis. Computed tomography (CT) has the potential to serve as a gold standard for joint imaging since it provides high resolution three-dimensional (3D) images of bone structure. The authors have developed a method to quantify erosion volume changes on wrist CT scans. In this article they present a description and validation of the methodology using multiple scans of a hand phantom and five human subjects. An anthropomorphic hand phantom was imaged with a clinical CT scanner at three different orientations separated by a 30-deg angle. A reader used the semiautomated software tool to segment the individual carpal bones of each CT scan. Reproducibility was measured as the root-mean-square standard deviation (RMMSD) and coefficient of variation (CoV) between multiple measurements of the carpal volumes. Longitudinal erosion progression was studied by inserting simulated erosions in a paired second scan. The change in simulated erosion size was calculated by performing 3D image registration and measuring the volume difference between scans in a region adjacent to the simulated erosion. The RMSSD for the total carpal volumes was 21.0 mm3 (CoV = 1.3%) for the phantom, and 44.1 mm3 (CoV = 3.0%) for the in vivo subjects. Using 3D registration and local volume difference calculations, the RMMSD was 1.0-3.0 mm3 The reader time was approximately 5 min per carpal bone. There was excellent agreement between the measured and simulated erosion volumes. The effect of a poorly measured volume for a single erosion is mitigated by the large number of subjects that would comprise a clinical study and that there will be many erosions measured per patient. CT promises to be a quantifiable tool to measure erosion volumes and may serve as a gold standard that can be used in the validation of other modalities such as magnetic resonance imaging.

  13. Scanning strategies for imaging arrays

    CERN Document Server

    Kovács, A

    2008-01-01

    Large-format (sub)millimeter wavelength imaging arrays are best operated in scanning observing modes rather than traditional position-switched (chopped) modes. The choice of observing mode is critical for isolating source signals from various types of noise interference, especially for ground-based instrumentation operating under a bright atmosphere. Ideal observing strategies can combat 1/f noise, resist instrumental defects, sensitively recover emission on large scales, and provide an even field coverage -- all under feasible requirements of telescope movement. This work aims to guide the design of observing patterns that maximize scientific returns. It also compares some of the popular choices of observing modes for (sub)millimeter imaging, such as random, Lissajous, billiard, spiral, On-The-Fly (OTF), DREAM, chopped and stare patterns. Many of the conclusions are also applicable other imaging applications and imaging in one dimension (e.g. spectroscopic observations).

  14. Scanning laser polarimetry in glaucoma.

    Science.gov (United States)

    Dada, Tanuj; Sharma, Reetika; Angmo, Dewang; Sinha, Gautam; Bhartiya, Shibal; Mishra, Sanjay K; Panda, Anita; Sihota, Ramanjit

    2014-11-01

    Glaucoma is an acquired progressive optic neuropathy which is characterized by changes in the optic nerve head and retinal nerve fiber layer (RNFL). White-on-white perimetry is the gold standard for the diagnosis of glaucoma. However, it can detect defects in the visual field only after the loss of as many as 40% of the ganglion cells. Hence, the measurement of RNFL thickness has come up. Optical coherence tomography and scanning laser polarimetry (SLP) are the techniques that utilize the evaluation of RNFL for the evaluation of glaucoma. SLP provides RNFL thickness measurements based upon the birefringence of the retinal ganglion cell axons. We have reviewed the published literature on the use of SLP in glaucoma. This review elucidates the technological principles, recent developments and the role of SLP in the diagnosis and monitoring of glaucomatous optic neuropathy, in the light of scientific evidence so far.

  15. Scanning laser polarimetry in glaucoma

    Directory of Open Access Journals (Sweden)

    Tanuj Dada

    2014-01-01

    Full Text Available Glaucoma is an acquired progressive optic neuropathy which is characterized by changes in the optic nerve head and retinal nerve fiber layer (RNFL. White-on-white perimetry is the gold standard for the diagnosis of glaucoma. However, it can detect defects in the visual field only after the loss of as many as 40% of the ganglion cells. Hence, the measurement of RNFL thickness has come up. Optical coherence tomography and scanning laser polarimetry (SLP are the techniques that utilize the evaluation of RNFL for the evaluation of glaucoma. SLP provides RNFL thickness measurements based upon the birefringence of the retinal ganglion cell axons. We have reviewed the published literature on the use of SLP in glaucoma. This review elucidates the technological principles, recent developments and the role of SLP in the diagnosis and monitoring of glaucomatous optic neuropathy, in the light of scientific evidence so far.

  16. Scanning ARM Cloud Radar Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Widener, K; Bharadwaj, N; Johnson, K

    2012-06-18

    The scanning ARM cloud radar (SACR) is a polarimetric Doppler radar consisting of three different radar designs based on operating frequency. These are designated as follows: (1) X-band SACR (X-SACR); (2) Ka-band SACR (Ka-SACR); and (3) W-band SACR (W-SACR). There are two SACRs on a single pedestal at each site where SACRs are deployed. The selection of the operating frequencies at each deployed site is predominantly determined by atmospheric attenuation at the site. Because RF attenuation increases with atmospheric water vapor content, ARM's Tropical Western Pacific (TWP) sites use the X-/Ka-band frequency pair. The Southern Great Plains (SGP) and North Slope of Alaska (NSA) sites field the Ka-/W-band frequency pair. One ARM Mobile Facility (AMF1) has a Ka/W-SACR and the other (AMF2) has a X/Ka-SACR.

  17. Fast scanning mode and its realization in a scanning acoustic microscope.

    Science.gov (United States)

    Ju, Bing-Feng; Bai, Xiaolong; Chen, Jian

    2012-03-01

    The scanning speed of the two-dimensional stage dominates the efficiency of mechanical scanning measurement systems. This paper focused on a detailed scanning time analysis of conventional raster and spiral scan modes and then proposed two fast alternative scanning modes. Performed on a self-developed scanning acoustic microscope (SAM), the measured images obtained by using the conventional scan mode and fast scan modes are compared. The total scanning time is reduced by 29% of the two proposed fast scan modes. It will offer a better solution for high speed scanning without sacrificing the system stability, and will not introduce additional difficulties to the configuration of scanning measurement systems. They can be easily applied to the mechanical scanning measuring systems with different driving actuators such as piezoelectric, linear motor, dc motor, and so on. The proposed fast raster and square spiral scan modes are realized in SAM, but not specially designed for it. Therefore, they have universal adaptability and can be applied to other scanning measurement systems with two-dimensional mechanical scanning stages, such as atomic force microscope or scanning tunneling microscope.

  18. Handbook of optical and laser scanning

    CERN Document Server

    Marshall, Gerald F

    2011-01-01

    From its initial publication titled Laser Beam Scanning in 1985 to Handbook of Optical and Laser Scanning, now in its second edition, this reference has kept professionals and students at the forefront of optical scanning technology. Carefully and meticulously updated in each iteration, the book continues to be the most comprehensive scanning resource on the market. It examines the breadth and depth of subtopics in the field from a variety of perspectives. The Second Edition covers: Technologies such as piezoelectric devices Applications of laser scanning such as Ladar (laser radar) Underwater

  19. Simultaneously scanning two connected tips in a scanning tunneling microscope

    Science.gov (United States)

    Liao, Wan-Ting; Lobb, C. J.; Wellstood, F. C.; Dreyer, M.

    2017-06-01

    We have modified a dual-tip scanning tunneling microscope (STM) by electrically connecting the tips together with a short (3 mm) strip of flexible 25 μm thick Nb foil. For simultaneous topographic imaging with both tips, we moved each tip to within tunneling distance z of a surface and modulated one tip's z-piezo at 5 kHz and the other at 10 kHz. The resulting combined tunneling current has modulation at both frequencies which we detect using individual lock-in amplifiers. Each lock-in output is fed back to its corresponding tip's individual STM z-position controller to maintain a stable current in both junctions. During the tests at room temperature, simultaneous imaging was performed with both tips made of Pt-Ir on Au/mica and highly oriented pyrolytic graphite (HOPG) samples, where a small tip-to-tip mechanical coupling was observed. We describe the system's performance, show results from simultaneous imaging, and discuss the potential application of the system to imaging superconducting phase differences.

  20. Laser Scanning Applications in Fluvial Geomorphology

    Science.gov (United States)

    Alho, P.

    2014-12-01

    During recent decades, the use of high-resolution laser scanning data in fluvial studies has rapidly increased. Airborne laser scanning (ALS) can be used to extensively map riverine topography. Laser scanning data have great potential to improve the effectiveness of topographical data acquisition and the accuracy and resolution of DTMs (Digital Terrain Models) needed in fluvial geomorphology. Airborne Laser Scanning (ALS) is applicable for mapping areas varying from reach to catchment scale and these data are, therefore, particularly suitable, especially for hydraulic modelling, mapping of flood inundation, and the detection of macro-scale fluvial geomorphology. With Terrestrial Laser Scanning (TLS) a spatial resolution of less than 1 mm and a range accuracy of few millimetres can be achieved. Mobile Laser Scanning (MLS) enables a remarkably faster survey approach compared to the conventional TLS method. One of the newest applications of MLS approaches involves a boat/cart/backpack -based mobile mapping system. This set-up includes laser scanning and imaging from a platform moving along a river course or floodplain and may be used to expand the spatial extent of terrestrial scanning. Detailed DTMs derived from laser scanning data can be used to improve the recognition of fluvial landforms, the geometric data of hydraulic modelling, and the estimation of flood inundation extents and the associated fluvial processes. Fluvial environments also offer challenges for the application of laser scanning techniques. Factors such as vegetation cover, terrain undulation, coarse surface materials and water surfaces may distort a laser scanning survey.

  1. Spatial heterodyne scanning laser confocal holographic microscopy

    CERN Document Server

    Liu, Changgeng

    2016-01-01

    Scanning laser confocal holographic microscopy using a spatial heterodyne detection method is presented. Spatial heterodyne detection technique employs a Mach-Zehnder interferometer with the reference beam frequency shifted by two acousto-optic modulators (AOM) relative to the object beam frequency. Different from the traditional temporal heterodyne detection technique in which hundreds temporal samples are taken at each scanning point to achieve the complex signal, the spatial heterodyne detection technique generates spatial interference fringes by use of a linear tempo-spatial relation provided by galvanometer scanning in a typical line-scanning confocal microscope or for the slow-scanning on one dimension in a point-scanning confocal microscope, thereby significantly reducing sampling rate and increasing the signal to noise ratio under the same illumination compared to the traditional temporal heterodyne counterpart. The proposed spatial heterodyne detection scheme applies to both line-scanning and point-s...

  2. Evolving brain lesions in the follow-up CT scans 12 h after traumatic brain injury

    Institute of Scientific and Technical Information of China (English)

    Muhammad Sohail Umerani; Asad Abbas; Saqib Kamran Bakhshi; Ujala Muhammad Qasim; Salman Sharif

    2016-01-01

    Objective: To establish the frequency of evolution in CT appearance from an initial scan to a subsequent scan within 12 h and the prognostic significance of such deterioration. Methods: All patients who presented to Department of Neurosurgery, Liaquat National Hospital and Medical College with traumatic brain injury and received their CT scan within the first 4 h of injury were included in the study. Indications for repeat CT scan were: any deterioration in neurological status after the initial scan, potentially deterio-rating lesion on initial scan with or without worsening neurology, worsening neurological status after the initial CT scan findings, or no neurological improvement after initial management in patients with normal CT scan with significant head injury. This compiled with the data of 107 patients. Results: There were 67 males and 40 females. The cause of trauma of the 70%patients was road traffic accident. In 11 patients, the lesion evolved towards resorption while 32 patients had no significant changes in the subsequent CT scan. Sixty four patients showed an increase in the size of the lesion and 65.6%of them were required surgical intervention subsequently. Conclusions: In case where the initial CT scan performed within 4 h of significant head injury was not correlated with the patient's neurology, it should be repeated within 12 h.

  3. The specific gallium-67 scan uptake pattern in psoas abscesses

    Energy Technology Data Exchange (ETDEWEB)

    Kao, P.-F.; Tzen, K.-Y.; Tsai, M.-F.; Yen, T.-C. [Dept. of Nuclear Medicine, Univ. School of Medicine, Tauyuan (Taiwan, Province of China); Tsui, K.-H. [Dept. of Urology, Chang Gung Memorial Hospital, Tauyuan (Taiwan, Province of China)

    1998-10-01

    A psoas abscess is a rare clinical entity that presents diagnostic and therapeutic challenges. In this retrospective study, we reviewed gallium-67 scan findings in cases of psoas abscess to determine the specific uptake pattern and the usefulness of {sup 67}Ga scans in diagnosis and management. Fifteen psoas abscess lesions in 13 patients who had undergone a {sup 67}Ga scan during an 8-year period were found in the hospital computer. All but two of the patients had been diagnosed as having fever of unknown origin, urinary tract infection or another irrelevant disease prior to the {sup 67}Ga scan. Of the 15 psoas abscess lesions, 12 (80%) could be clearly diagnosed on the basis of the specific {sup 67} Ga uptake pattern, in which: (1) the oblique direction of the {sup 67}Ga-avid lesion correlates with the orientation of the psoas muscle from the lumbar region to the hip joint region; (2) the lesion does not cross the abdominal midline; (3) the lesion goes through the inguinal region; and (4) the lesion involves at least two-thirds of the whole length of the psoas muscle. The specific features may help in the differentiation of psoas abscess from other intra-abdominal lesions or normal bowel distribution, especially with single-photon emission tomographic images. In 7 of 13 patients (53.8%) the {sup 67}Ga scan findings contributed to the clinical management of the patients by first detecting the focus of the infection. Multiple concomitant {sup 67}Ga-avid lesions were found in ten patients. In conclusion, the specific features as well as the whole-body survey with {sup 67}Ga scan are useful and important in the diagnosis of psoas abscesses and the detection of unexpected concomitant multiple infectious foci in clinically suspicious infectious disease patients. (orig.) With 4 figs., 2 tabs., 29 refs.

  4. Lymphoplasmacytic sclerosing cholangitis: assessment of clinical, CT, and pathological findings

    Energy Technology Data Exchange (ETDEWEB)

    Itoh, S., E-mail: shigekimiyo@luck.ocn.ne.j [Department of Technical Radiology, Nagoya University School of Health Sciences, Nagoya (Japan); Nagasaka, T. [Department of Pathology, Nagoya University Graduate School of Medicine, Nagoya (Japan); Suzuki, K.; Satake, H.; Ota, T.; Naganawa, S. [Department of Radiology, Nagoya University Graduate School of Medicine, Nagoya (Japan)

    2009-11-15

    Aim: To assess the clinical, computed tomography (CT), and pathological findings in patients with lymphoplasmacytic sclerosing cholangitis. Materials and methods: Fifteen consecutive patients (four women and 11 men, mean age 71 years) with lymphoplasmacytic sclerosing cholangitis and without the characteristic features of underlying disorders causing benign biliary strictures were retrospectively recruited. Two radiologists evaluated multiphase contrast-enhanced CT images acquired with 0.5 or 1-mm collimation. One pathologist performed all histological examinations, including IgG4 immunostaining. Results: The intrahepatic biliary ducts showed dilatation in all 15 patients, but only seven presented with jaundice. Although laboratory data were not available in all patients, serum gammaglobulin and IgG levels were elevated in five of six patients and six of eight patients, respectively. Anti-nuclear antibody was detected in three of six patients. The involved biliary ducts showed the following CT findings: involvement of the hilar biliary duct (14/15), a mean wall thickness of 4.9 mm, a smooth margin (10/15), a narrow but visible lumen (6/15), hyper-attenuation during the late arterial phase (9/15), homogeneous hyper-attenuation during the delayed phase (11/11), and no vascular invasion (14/15). Abnormal findings in the pancreas and urinary tract were detected in eight of 15 patients. In 13 patients with adequate specimens, moderate to severe lymphoplasmacytic infiltration associated with dense fibrosis was observed. Infiltration of IgG4-positive plasma cells was moderate or severe in nine patients and minimal or absent in four patients. Conclusion: Lymphoplasmacytic sclerosing cholangitis exhibits relatively characteristic clinical and CT findings, although they are not sufficiently specific for differentiation from other biliary diseases.

  5. Advanced oxidation scanning probe lithography

    Science.gov (United States)

    Ryu, Yu K.; Garcia, Ricardo

    2017-04-01

    Force microscopy enables a variety of approaches to manipulate and/or modify surfaces. Few of those methods have evolved into advanced probe-based lithographies. Oxidation scanning probe lithography (o-SPL) is the only lithography that enables the direct and resist-less nanoscale patterning of a large variety of materials, from metals to semiconductors; from self-assembled monolayers to biomolecules. Oxidation SPL has also been applied to develop sophisticated electronic and nanomechanical devices such as quantum dots, quantum point contacts, nanowire transistors or mechanical resonators. Here, we review the principles, instrumentation aspects and some device applications of o-SPL. Our focus is to provide a balanced view of the method that introduces the key steps in its evolution, provides some detailed explanations on its fundamentals and presents current trends and applications. To illustrate the capabilities and potential of o-SPL as an alternative lithography we have favored the most recent and updated contributions in nanopatterning and device fabrication.

  6. The INTEGRAL Galactic Plane Scanning

    CERN Document Server

    Fiocchi, Mariateresa

    2013-01-01

    After the first nine years of INTEGRAL operational life, the discovery of new sources and source types, a large fraction of which are highly transient or highly absorbed, is certainly one of the most compelling results and legacies of INTEGRAL. Frequent monitoring of the Galactic Plane in AO8 and AO9 campaigns allowed us to detect transient sources, both known and new, confirming that the gamma-ray sky is dominated by the extreme variability of different classes of objects. Regular scans of the Galactic Plane by INTEGRAL provide the most sensitive hard X-ray wide survey to date of our Galaxy, with flux limits of the order of 0.3 mCrab for an exposure time of ~2Ms. Many transient sources have been detected on a wide range of time scales (~hours to months) and identified by triggered followup observations, mainly by Swift/XRT and optical/infrared telescopes. These discoveries are very important to characterize the X-ray binary population in our Galaxy, that is necessary input for evolution studies. The transien...

  7. Advanced oxidation scanning probe lithography.

    Science.gov (United States)

    Ryu, Yu K; Garcia, Ricardo

    2017-04-07

    Force microscopy enables a variety of approaches to manipulate and/or modify surfaces. Few of those methods have evolved into advanced probe-based lithographies. Oxidation scanning probe lithography (o-SPL) is the only lithography that enables the direct and resist-less nanoscale patterning of a large variety of materials, from metals to semiconductors; from self-assembled monolayers to biomolecules. Oxidation SPL has also been applied to develop sophisticated electronic and nanomechanical devices such as quantum dots, quantum point contacts, nanowire transistors or mechanical resonators. Here, we review the principles, instrumentation aspects and some device applications of o-SPL. Our focus is to provide a balanced view of the method that introduces the key steps in its evolution, provides some detailed explanations on its fundamentals and presents current trends and applications. To illustrate the capabilities and potential of o-SPL as an alternative lithography we have favored the most recent and updated contributions in nanopatterning and device fabrication.

  8. Image scanning microscopy with radially polarized light

    Science.gov (United States)

    Xiao, Yun; Zhang, Yunhai; Wei, Tongda; Huang, Wei; Shi, Yaqin

    2017-03-01

    In order to improve the resolution of image scanning microscopy, we present a method based on image scanning microscopy and radially polarized light. According to the theory of image scanning microscopy, we get the effective point spread function of image scanning microscopy with the longitudinal component of radially polarized light and a 1 AU detection area, and obtain imaging results of the analyzed samples using this method. Results show that the resolution can be enhanced by 7% compared with that in image scanning microscopy with circularly polarized light, and is 1.54-fold higher than that in confocal microscopy with a pinhole of 1 AU. Additionally, the peak intensity of ISM is 1.54-fold higher than that of a confocal microscopy with a pinhole of 1 AU. In conclusion, the combination of the image scanning microscopy and the radially polarized light could improve the resolution, and it could realize high-resolution and high SNR imaging at the same time.

  9. Human Digital Modeling & Hand Scanning Lab

    Data.gov (United States)

    Federal Laboratory Consortium — This laboratory incorporates specialized scanning equipment, computer workstations and software applications for the acquisition and analysis of digitized models of...

  10. Parallel scanning probe arrays: their applications

    Directory of Open Access Journals (Sweden)

    Chang Liu

    2008-01-01

    Full Text Available Since the invention of the scanning tunneling microscope (STM1 and the atomic force microscope (AFM2, the field of scanning probe microscopy (SPM instruments has grown steadily and has had a profound influence in materials research, chemistry, biology, nanotechnology, and electronics3,4. Today, scanning probe instruments are used for metrology, characterization5, detection6, manipulation7, patterning8,9, and material modification. A wide range of scanning probe applications are available, taking advantage of various modes of tip–substrate interactions, including force, optics10,11, electrochemistry12, electromagnetics, electrostatics, thermal and mass transfer13,14, and vibration15,16.

  11. Influence of scanning strategies on the accuracy of digital intraoral scanning systems.

    Science.gov (United States)

    Ender, A; Mehl, A

    2013-01-01

    The digital intraoral impression is a central part in today's CAD/CAM dentistry. With its possibilities, new treatment options for the patient is provided and the prosthetic workflow is accelerated. Nowadays, the major issue with intraoral scanning systems is to gain more accuracy especially for larger scan areas and to simplify clinical handling for the dentist. The aim of this study was to investigate different scanning strategies regardingtheir accuracy with full arch scans in an in-vitro study design. A reference master model was used for the digital impressions with the Lava COS, the Cerec Bluecam and a powderfree intraoral scanning system, Cadent iTero. The trueness and precision of each scanning protocol was measured. Lava COS provides the a trueness of 45.8 microm with the scanning protocol recommended from the manufacturer. A different scanning protocol shows significantly lower accuracy (trueness +/- 90.2 microm). Cerec Bluecam also benefits from an optimal scanning protocol with a trueness of +/- 23.3 microm compared to +/- 52.5 microm with a standard protocol. The powderfree impression system Cadent iTero shows also a high accurate full-arch scan with a trueness of +/- 35.0 microm and a precision of +/- 30.9 microm. With the current intraoral scanning systems, full arch dental impressions are possible with a high accuracy, if adequate scan strategies are used. The powderfree scanning system provides the same level of accuracy compared to scanning systems with surface pretreatment.

  12. Simulation study of secondary electron images in scanning ion microscopy

    CERN Document Server

    Ohya, K

    2003-01-01

    The target atomic number, Z sub 2 , dependence of secondary electron yield is simulated by applying a Monte Carlo code for 17 species of metals bombarded by Ga ions and electrons in order to study the contrast difference between scanning ion microscopes (SIM) and scanning electron microscopes (SEM). In addition to the remarkable reversal of the Z sub 2 dependence between the Ga ion and electron bombardment, a fine structure, which is correlated to the density of the conduction band electrons in the metal, is calculated for both. The brightness changes of the secondary electron images in SIM and SEM are simulated using Au and Al surfaces adjacent to each other. The results indicate that the image contrast in SIM is much more sensitive to the material species and is clearer than that for SEM. The origin of the difference between SIM and SEM comes from the difference in the lateral distribution of secondary electrons excited within the escape depth.

  13. An evaluation of cranial CT scanning in clinical psychiatry.

    Science.gov (United States)

    Colohan, H; O'Callaghan, E; Larkin, C; Waddington, J L

    1989-07-01

    From 6,300 psychiatric admissions over a 37 month period, all 54 patient referrals for CT were identified and their charts reviewed. CT influenced diagnosis, management or prognosis in 11.7 percent of patients scanned. There was poor correlation between organicity on CT scan and findings on physical examination, laboratory testing, EEG and psychological testing. The mental state examination was the single significant correlate of CT abnormality. We suggest that the use of a formalised mental state examination such as the Mini Mental State, in addition to the usual clinical assessment of mental state, may improve the accuracy of prediction of abnormality on CT scan. The introduction of X-ray computed tomography (CT) is recognised to be one of the most important innovations in the recent history of clinical medicine. In neurology the value of a non-invasive technique for examining the intracranial contents was quickly realised in the areas of diagnosis, particularly in the detection of vascular accidents and tumours. CT has also attained a significant place in psychiatry. In research studies, it has provided important information on schizophrenia, alcoholism and chronic organic reactions. The place of CT in clinical psychiatry is less clear. As its availability has increased, such scans are being requested with increasing frequency in psychiatric patients. Cranial CT is a highly sensitive diagnostic procedure which, when used unselectively, may result in the discovery of incidental findings. Until recently, a function of the psychiatrist in relation to diagnosis was to first seek to distinguish symptoms produced by organic pathology from those produced by functional illness.(ABSTRACT TRUNCATED AT 250 WORDS)

  14. Functional Scanning Probe Imaging of Nanostructured Solar Energy Materials.

    Science.gov (United States)

    Giridharagopal, Rajiv; Cox, Phillip A; Ginger, David S

    2016-09-20

    From hybrid perovskites to semiconducting polymer/fullerene blends for organic photovoltaics, many new materials being explored for energy harvesting and storage exhibit performance characteristics that depend sensitively on their nanoscale morphology. At the same time, rapid advances in the capability and accessibility of scanning probe microscopy methods over the past decade have made it possible to study processing/structure/function relationships ranging from photocurrent collection to photocarrier lifetimes with resolutions on the scale of tens of nanometers or better. Importantly, such scanning probe methods offer the potential to combine measurements of local structure with local function, and they can be implemented to study materials in situ or devices in operando to better understand how materials evolve in time in response to an external stimulus or environmental perturbation. This Account highlights recent advances in the development and application of scanning probe microscopy methods that can help address such questions while filling key gaps between the capabilities of conventional electron microscopy and newer super-resolution optical methods. Focusing on semiconductor materials for solar energy applications, we highlight a range of electrical and optoelectronic scanning probe microscopy methods that exploit the local dynamics of an atomic force microscope tip to probe key properties of the solar cell material or device structure. We discuss how it is possible to extract relevant device properties using noncontact scanning probe methods as well as how these properties guide materials development. Specifically, we discuss intensity-modulated scanning Kelvin probe microscopy (IM-SKPM), time-resolved electrostatic force microscopy (trEFM), frequency-modulated electrostatic force microscopy (FM-EFM), and cantilever ringdown imaging. We explain these developments in the context of classic atomic force microscopy (AFM) methods that exploit the physics of

  15. A Student-Built Scanning Tunneling Microscope

    Science.gov (United States)

    Ekkens, Tom

    2015-01-01

    Many introductory and nanotechnology textbooks discuss the operation of various microscopes including atomic force (AFM), scanning tunneling (STM), and scanning electron microscopes (SEM). In a nanotechnology laboratory class, students frequently utilize microscopes to obtain data without a thought about the detailed operation of the tool itself.…

  16. Live ultrasound volume reconstruction using scout scanning

    Science.gov (United States)

    Meyer, Amelie; Lasso, Andras; Ungi, Tamas; Fichtinger, Gabor

    2015-03-01

    Ultrasound-guided interventions often necessitate scanning of deep-seated anatomical structures that may be hard to visualize. Visualization can be improved using reconstructed 3D ultrasound volumes. High-resolution 3D reconstruction of a large area during clinical interventions is challenging if the region of interest is unknown. We propose a two-stage scanning method allowing the user to perform quick low-resolution scouting followed by high-resolution live volume reconstruction. Scout scanning is accomplished by stacking 2D tracked ultrasound images into a low-resolution volume. Then, within a region of interest defined in the scout scan, live volume reconstruction can be performed by continuous scanning until sufficient image density is achieved. We implemented the workflow as a module of the open-source 3D Slicer application, within the SlicerIGT extension and building on the PLUS toolkit. Scout scanning is performed in a few seconds using 3 mm spacing to allow region of interest definition. Live reconstruction parameters are set to provide good image quality (0.5 mm spacing, hole filling enabled) and feedback is given during live scanning by regularly updated display of the reconstructed volume. Use of scout scanning may allow the physician to identify anatomical structures. Subsequent live volume reconstruction in a region of interest may assist in procedures such as targeting needle interventions or estimating brain shift during surgery.

  17. Ultrasonic scanning for pallet part grading

    Science.gov (United States)

    Mohammed F. Kabir; Daniel L. Schmoldt; Mark E. Schafer; Philip A. Araman

    2000-01-01

    Sorting and grading of wooden pallet parts are key factors for pallet manufacturing quality and pallet durability. The feasibility of ultrasonic scanning for defect detection in pallet manufacturing is examined in this report. Scanning was conducted by two pressure-contact rolling transducers in a pitch-catch arrangement. Pallet part deckboards were fed through the...

  18. Towards high-speed scanning tunneling microscopy

    NARCIS (Netherlands)

    Tabak, Femke Chantal

    2013-01-01

    In this thesis, two routes towards high-speed scanning tunneling microscopy (STM) are described. The first possibility for high-speed scanning that is discussed is the use of MEMS (Micro-Electro Mechanical Systems) devices as high-speed add-ons in STM microscopes. The functionality of these devices

  19. A Student-Built Scanning Tunneling Microscope

    Science.gov (United States)

    Ekkens, Tom

    2015-01-01

    Many introductory and nanotechnology textbooks discuss the operation of various microscopes including atomic force (AFM), scanning tunneling (STM), and scanning electron microscopes (SEM). In a nanotechnology laboratory class, students frequently utilize microscopes to obtain data without a thought about the detailed operation of the tool itself.…

  20. Scanning System -- Technology Worth a Look

    Science.gov (United States)

    Philip A. Araman; Daniel L. Schmoldt; Richard W. Conners; D. Earl Kline

    1995-01-01

    In an effort to help automate the inspection for lumber defects, optical scanning systems are emerging as an alternative to the human eye. Although still in its infancy, scanning technology is being explored by machine companies and universities. This article was excerpted from "Machine Vision Systems for Grading and Processing Hardwood Lumber," by Philip...

  1. Spatial scan statistics using elliptic windows

    DEFF Research Database (Denmark)

    Christiansen, Lasse Engbo; Andersen, Jens Strodl; Wegener, Henrik Caspar

    The spatial scan statistic is widely used to search for clusters in epidemiologic data. This paper shows that the usually applied elimination of secondary clusters as implemented in SatScan is sensitive to smooth changes in the shape of the clusters. We present an algorithm for generation of set...

  2. Spatial scan statistics using elliptic windows

    DEFF Research Database (Denmark)

    Christiansen, Lasse Engbo; Andersen, Jens Strodl; Wegener, Henrik Caspar

    2006-01-01

    The spatial scan statistic is widely used to search for clusters. This article shows that the usually applied elimination of secondary clusters as implemented in SatScan is sensitive to smooth changes in the shape of the clusters. We present an algorithm for generation of a set of confocal elliptic...

  3. Getting a CAT Scan (For Kids)

    Medline Plus

    Full Text Available ... A Real Lifesaver Kids Talk About: Coaches Getting a CAT Scan (Video) KidsHealth > For Kids > Getting a CAT Scan (Video) Print A A A en español Obtención de una tomografía ...

  4. Getting a CAT Scan (For Kids)

    Science.gov (United States)

    ... What Happens in the Operating Room? Getting a CAT Scan (Video) KidsHealth > For Kids > Getting a CAT Scan (Video) A A A en español Obtención de una tomografía computada (video) CAT stands for "computerized axial tomography." Translated, that means ...

  5. Colloquium: Time-resolved scanning tunneling microscopy

    NARCIS (Netherlands)

    Houselt, van Arie; Zandvliet, Harold J.W.

    2010-01-01

    Scanning tunneling microscopy has revolutionized our ability to image, study, and manipulate solid surfaces on the size scale of atoms. One important limitation of the scanning tunneling microscope (STM) is, however, its poor time resolution. Recording a standard image with a STM typically takes abo

  6. Camera Systems Rapidly Scan Large Structures

    Science.gov (United States)

    2013-01-01

    Needing a method to quickly scan large structures like an aircraft wing, Langley Research Center developed the line scanning thermography (LST) system. LST works in tandem with a moving infrared camera to capture how a material responds to changes in temperature. Princeton Junction, New Jersey-based MISTRAS Group Inc. now licenses the technology and uses it in power stations and industrial plants.

  7. Getting a CAT Scan (For Kids)

    Medline Plus

    Full Text Available ... Know About Puberty Train Your Temper Getting a CAT Scan (Video) KidsHealth > For Kids > Getting a CAT Scan (Video) Print A A A en español Obtención de una tomografía computada (video) CAT stands for "computerized axial tomography." Translated, that means ...

  8. Security scanning of Web sites at CERN

    CERN Multimedia

    IT Department

    2010-01-01

    As of early 2010, the CERN Computer Security Team will start regular scanning of all Web sites and Web applications at CERN, visible on the Internet, or on the General Purpose Network (office network). The goal of this scanning is to improve the quality of CERN Web sites. All deficits found will be reported by e-mail to the relevant Web site owners, and must be fixed in a timely manner. Web site owners may also request one-off scans of their Web site or Web application, by sending an e-mail to Computer.Security@cern.ch. These Web scans are designed to limit the impact on the scanned Web sites. Nevertheless, in very rare cases scans may cause undesired side-effects, e.g. generate a large number of log entries, or cause particularly badly designed or less robust Web applications to crash. If a Web site is affected by these security scans, it will also be susceptible to any more aggressive scan that can be performed any time by a malicious attacker. Such Web applications should be fixed, and also additionally...

  9. "Bottle Brush Sign"-Spinal Meningeal Disease on 18F-FDG PET-CT Scan.

    Science.gov (United States)

    Riaz, Saima; Naz, Fozia; Bashir, Humayun; Niazi, Imran Khalid

    2016-09-01

    A 30-year-old man with a history of stage IV AE diffuse large cell lymphoma of left proximal humerus presented with new onset lower limb weakness at completion of chemotherapy. The F-FDG PET-CT scan showed increased intraspinal uptake from T12 to S1 vertebrae with unique "bottle brush" appearance in keeping with spinal meningeal disease. The leptomeningeal disease was further confirmed on correlative MRI scan.

  10. Theory of second optimization for scan experiment

    CERN Document Server

    Mo, X H

    2015-01-01

    The optimal design of scan experiment is of great significance both for scientific research and from economical viewpoint. Two approaches, one has recourse to the sampling technique and the other resorts to the analytical proof, are adopted to figure out the optimized scan scheme for the relevant parameters. The final results indicate that for $n$ parameters scan experiment, $n$ energy points are necessary and sufficient for optimal determination of these $n$ parameters; each optimal position can be acquired by single parameter scan (sampling method), or by analysis of auxiliary function (analytic method); the luminosity allocation among the points can be determined analytically with respect to the relative importance between parameters. By virtue of the second optimization theory established in this paper, it is feasible to accommodate the perfectly optimal scheme for any scan experiment.

  11. Scanning tunneling microscope assembly, reactor, and system

    Science.gov (United States)

    Tao, Feng; Salmeron, Miquel; Somorjai, Gabor A

    2014-11-18

    An embodiment of a scanning tunneling microscope (STM) reactor includes a pressure vessel, an STM assembly, and three spring coupling objects. The pressure vessel includes a sealable port, an interior, and an exterior. An embodiment of an STM system includes a vacuum chamber, an STM reactor, and three springs. The three springs couple the STM reactor to the vacuum chamber and are operable to suspend the scanning tunneling microscope reactor within the interior of the vacuum chamber during operation of the STM reactor. An embodiment of an STM assembly includes a coarse displacement arrangement, a piezoelectric fine displacement scanning tube coupled to the coarse displacement arrangement, and a receiver. The piezoelectric fine displacement scanning tube is coupled to the coarse displacement arrangement. The receiver is coupled to the piezoelectric scanning tube and is operable to receive a tip holder, and the tip holder is operable to receive a tip.

  12. Optical scanning holography for stereoscopic display

    Science.gov (United States)

    Liu, Jung-Ping; Wen, Hsuan-Hsuan

    2016-10-01

    Optical Scanning Holography (OSH) is a scanning-type digital holographic recording technique. One of OSH's most important properties is that the OSH can record an incoherent hologram, which is free of speckle and thus is suitable for the applications of holographic display. The recording time of a scanning hologram is proportional to the sampling resolution. Hence the viewing angle as well as the resolution of a scanning hologram is limited for avoid too long recording. As a result, the viewing angle is not large enough for optical display. To solve this problem, we recorded two scanning holograms at different viewing angles. The two holograms are synthesized to a single stereoscopic hologram with two main viewing angles. In displaying, two views at the two main viewing angles are reconstructed. Because both views contain full-depth-resolved 3D scenes, the problem of accommodation conflict in conventional stereogram is avoided.

  13. Scanning radiance meter for sea truth measurements

    Energy Technology Data Exchange (ETDEWEB)

    Haltrin, V.I. [Naval Resarch Lab., Stennis Space Center, MS (United States); Lee, M.E.; Martynov, O.V. [Optical Oceanography Lab., Crimea (United Kingdom)

    1996-11-01

    The general principles of an optical scanning assembly for the investigation of submerged angular radiance distribution are discussed. A sample implementation of continuous scanning over arbitrary solid angles which can be used in angular radiance distribution meters is described. The system is a periscope made of two mirrors coupled with two pinion gears with perpendicular axes of rotation. The mutual rotation and movement of the mirrors allow implementation of different scanning laws. Analysis shows that the scanning type and its details in whole depend on the gear ratio. By changing the ratio, various types of scanning may be achieved inside a solid angle from the zenith to the azimuth with an arbitrary angular resolution.

  14. Full cycle rapid scan EPR deconvolution algorithm

    Science.gov (United States)

    Tseytlin, Mark

    2017-08-01

    Rapid scan electron paramagnetic resonance (RS EPR) is a continuous-wave (CW) method that combines narrowband excitation and broadband detection. Sinusoidal magnetic field scans that span the entire EPR spectrum cause electron spin excitations twice during the scan period. Periodic transient RS signals are digitized and time-averaged. Deconvolution of absorption spectrum from the measured full-cycle signal is an ill-posed problem that does not have a stable solution because the magnetic field passes the same EPR line twice per sinusoidal scan during up- and down-field passages. As a result, RS signals consist of two contributions that need to be separated and postprocessed individually. Deconvolution of either of the contributions is a well-posed problem that has a stable solution. The current version of the RS EPR algorithm solves the separation problem by cutting the full-scan signal into two half-period pieces. This imposes a constraint on the experiment; the EPR signal must completely decay by the end of each half-scan in order to not be truncated. The constraint limits the maximum scan frequency and, therefore, the RS signal-to-noise gain. Faster scans permit the use of higher excitation powers without saturating the spin system, translating into a higher EPR sensitivity. A stable, full-scan algorithm is described in this paper that does not require truncation of the periodic response. This algorithm utilizes the additive property of linear systems: the response to a sum of two inputs is equal the sum of responses to each of the inputs separately. Based on this property, the mathematical model for CW RS EPR can be replaced by that of a sum of two independent full-cycle pulsed field-modulated experiments. In each of these experiments, the excitation power equals to zero during either up- or down-field scan. The full-cycle algorithm permits approaching the upper theoretical scan frequency limit; the transient spin system response must decay within the scan

  15. Value and clinical application of orthopedic metal artifact reduction algorithm in CT scans after orthopedic metal implantation

    Energy Technology Data Exchange (ETDEWEB)

    Hu, Yi; Pan, Shinong; Zhao, Xudong; Guo, Wenli; He, Ming; Guo, Qiyong [Shengjing Hospital of China Medical University, Shenyang (China)

    2017-06-15

    To evaluate orthopedic metal artifact reduction algorithm (O-MAR) in CT orthopedic metal artifact reduction at different tube voltages, identify an appropriate low tube voltage for clinical practice, and investigate its clinical application. The institutional ethical committee approved all the animal procedures. A stainless-steel plate and four screws were implanted into the femurs of three Japanese white rabbits. Preoperative CT was performed at 120 kVp without O-MAR reconstruction, and postoperative CT was performed at 80–140 kVp with O-MAR. Muscular CT attenuation, artifact index (AI) and signal-to-noise ratio (SNR) were compared between preoperative and postoperative images (unpaired t test), between paired O-MAR and non-O-MAR images (paired Student t test) and among different kVp settings (repeated measures ANOVA). Artifacts' severity, muscular homogeneity, visibility of inter-muscular space and definition of bony structures were subjectively evaluated and compared (Wilcoxon rank-sum test). In the clinical study, 20 patients undertook CT scan at low kVp with O-MAR with informed consent. The diagnostic satisfaction of clinical images was subjectively assessed. Animal experiments showed that the use of O-MAR resulted in accurate CT attenuation, lower AI, better SNR, and higher subjective scores (p < 0.010) at all tube voltages. O-MAR images at 100 kVp had almost the same AI and SNR as non-O-MAR images at 140 kVp. All O-MAR images were scored ≥ 3. In addition, 95% of clinical CT images performed at 100 kVp were considered satisfactory. O-MAR can effectively reduce orthopedic metal artifacts at different tube voltages, and facilitates low-tube-voltage CT for patients with orthopedic metal implants.

  16. Body surface area determined by whole-body CT scanning: need for new formulae?

    DEFF Research Database (Denmark)

    Villa, Chiara; Primeau, Charlotte; Hesse, Ulrik

    2017-01-01

    Calculation of the estimated body surface area (BSA) by body height and weight has been a challenge in the past centuries due to lack of a well-documented gold standard. More recently, available techniques such as 3D laser surface scanning and CT scanning may be expected to quantify the BSA...... Mimics software, and BSA values were automatically extracted from the program. They were compared with nine predictive equations from the literature. Remarkably, close correlations (r > 0·90) were found between BSA values from CT scans and those from the predictive formulae. A mean BSA of the 54 cadavers...

  17. The Healthy Brain Network Serial Scanning Initiative: a resource for evaluating inter-individual differences and their reliabilities across scan conditions and sessions.

    Science.gov (United States)

    O'Connor, David; Potler, Natan Vega; Kovacs, Meagan; Xu, Ting; Ai, Lei; Pellman, John; Vanderwal, Tamara; Parra, Lucas C; Cohen, Samantha; Ghosh, Satrajit; Escalera, Jasmine; Grant-Villegas, Natalie; Osman, Yael; Bui, Anastasia; Craddock, R Cameron; Milham, Michael P

    2017-02-01

    Although typically measured during the resting state, a growing literature is illustrating the ability to map intrinsic connectivity with functional MRI during task and naturalistic viewing conditions. These paradigms are drawing excitement due to their greater tolerability in clinical and developing populations and because they enable a wider range of analyses (e.g., inter-subject correlations). To be clinically useful, the test-retest reliability of connectivity measured during these paradigms needs to be established. This resource provides data for evaluating test-retest reliability for full-brain connectivity patterns detected during each of four scan conditions that differ with respect to level of engagement (rest, abstract animations, movie clips, flanker task). Data are provided for 13 participants, each scanned in 12 sessions with 10 minutes for each scan of the four conditions. Diffusion kurtosis imaging data was also obtained at each session. Technical validation and demonstrative reliability analyses were carried out at the connection-level using the Intraclass Correlation Coefficient and at network-level representations of the data using the Image Intraclass Correlation Coefficient. Variation in intrinsic functional connectivity across sessions was generally found to be greater than that attributable to scan condition. Between-condition reliability was generally high, particularly for the frontoparietal and default networks. Between-session reliabilities obtained separately for the different scan conditions were comparable, though notably lower than between-condition reliabilities. This resource provides a test-bed for quantifying the reliability of connectivity indices across subjects, conditions and time. The resource can be used to compare and optimize different frameworks for measuring connectivity and data collection parameters such as scan length. Additionally, investigators can explore the unique perspectives of the brain's functional

  18. Cone structure imaged with adaptive optics scanning laser ophthalmoscopy in eyes with nonneovascular age-related macular degeneration

    National Research Council Canada - National Science Library

    Zayit-Soudry, Shiri; Duncan, Jacque L; Syed, Reema; Menghini, Moreno; Roorda, Austin J

    2013-01-01

    To evaluate cone spacing using adaptive optics scanning laser ophthalmoscopy (AOSLO) in eyes with nonneovascular AMD, and to correlate progression of AOSLO-derived cone measures with standard measures of macular structure...

  19. DSN Beowulf Cluster-Based VLBI Correlator

    Science.gov (United States)

    Rogstad, Stephen P.; Jongeling, Andre P.; Finley, Susan G.; White, Leslie A.; Lanyi, Gabor E.; Clark, John E.; Goodhart, Charles E.

    2009-01-01

    The NASA Deep Space Network (DSN) requires a broadband VLBI (very long baseline interferometry) correlator to process data routinely taken as part of the VLBI source Catalogue Maintenance and Enhancement task (CAT M&E) and the Time and Earth Motion Precision Observations task (TEMPO). The data provided by these measurements are a crucial ingredient in the formation of precision deep-space navigation models. In addition, a VLBI correlator is needed to provide support for other VLBI related activities for both internal and external customers. The JPL VLBI Correlator (JVC) was designed, developed, and delivered to the DSN as a successor to the legacy Block II Correlator. The JVC is a full-capability VLBI correlator that uses software processes running on multiple computers to cross-correlate two-antenna broadband noise data. Components of this new system (see Figure 1) consist of Linux PCs integrated into a Beowulf Cluster, an existing Mark5 data storage system, a RAID array, an existing software correlator package (SoftC) originally developed for Delta DOR Navigation processing, and various custom- developed software processes and scripts. Parallel processing on the JVC is achieved by assigning slave nodes of the Beowulf cluster to process separate scans in parallel until all scans have been processed. Due to the single stream sequential playback of the Mark5 data, some ramp-up time is required before all nodes can have access to required scan data. Core functions of each processing step are accomplished using optimized C programs. The coordination and execution of these programs across the cluster is accomplished using Pearl scripts, PostgreSQL commands, and a handful of miscellaneous system utilities. Mark5 data modules are loaded on Mark5 Data systems playback units, one per station. Data processing is started when the operator scans the Mark5 systems and runs a script that reads various configuration files and then creates an experiment-dependent status database

  20. Optical coherence tomography, scanning laser polarimetry and confocal scanning laser ophthalmoscopy in retinal nerve fiber layer measurements of glaucoma patients.

    Science.gov (United States)

    Fanihagh, Farsad; Kremmer, Stephan; Anastassiou, Gerasimos; Schallenberg, Maurice

    2015-01-01

    To determine the correlations and strength of association between different imaging systems in analyzing the retinal nerve fiber layer (RNFL) of glaucoma patients: optical coherence tomography (OCT), scanning laser polarimetry (SLP) and confocal scanning laser ophthalmoscopy (CSLO). 114 eyes of patients with moderate open angle glaucoma underwent spectral domain OCT (Topcon SD-OCT 2000 and Zeiss Cirrus HD-OCT), SLP (GDx VCC and GDx Pro) and CSLO (Heidelberg Retina Tomograph, HRT 3). Correlation coefficients were calculated between the structural parameters yielded by these examinations. The quantitative relationship between the measured RNFL thickness globally and for the four regions (superior, inferior, nasal, temporal) were evaluated with different regression models for all used imaging systems. The strongest correlation of RNFL measurements was found between devices using the same technology like GDx VCC and GDx Pro as well as Topcon OCT and Cirrus OCT. In glaucoma patients, the strongest associations (R²) were found between RNFL measurements of the two optical coherence tomography devices Topcon OCT and Cirrus OCT (R² = 0.513) and between GDx VCC and GDx Pro (R² = 0.451). The results of the OCTs and GDX Pro also had a strong quantitative relationship (Topcon OCT R² = 0.339 and Cirrus OCT R² = 0.347). GDx VCC and the OCTs showed a mild to moderate association (Topcon OCT R² = 0.207 and Cirrus OCT R² = 0.258). The confocal scanning laser ophthalmoscopy (HRT 3) had the lowest association to all other devices (Topcon OCT R² = 0.254, Cirrus OCT R² = 0.158, GDx Pro R² = 0.086 and GDx VCC R² = 0.1). The measurements of the RNFL in glaucoma patients reveal a high correlation of OCT and GDx devices because OCTs can measure all major retinal layers and SLP can detect nerve fibers allowing a comparison between the results of this devices. However, CSLO by means of HRT topography can only measure height values of the retinal surface but it cannot distinguish

  1. A dynamic scanning method based on signal-statistics for scanning electron microscopy.

    Science.gov (United States)

    Timischl, F

    2014-01-01

    A novel dynamic scanning method for noise reduction in scanning electron microscopy and related applications is presented. The scanning method dynamically adjusts the scanning speed of the electron beam depending on the statistical behavior of the detector signal and gives SEM images with uniform and predefined standard deviation, independent of the signal value itself. In the case of partially saturated images, the proposed method decreases image acquisition time without sacrificing image quality. The effectiveness of the proposed method is shown and compared to the conventional scanning method and median filtering using numerical simulations.

  2. pMSSM scans in ATLAS

    CERN Document Server

    Heinrich, Lukas; The ATLAS collaboration

    2016-01-01

    Multidimensional scans of the pMSSM have been used in ATLAS to assess the experiment sensitivity to classess of models usually not well represented by simplified models. Such scans require a well defined approach in generating signal events and deciding which ones should be passed through the CPU-intensive detector simulation and for which ones the sensitivity can be instead parametrised. They also impose challenges in deciding how the experiment sensitivity should be summarised. The talk will discuss in detail hos such large-scale scans have been approached by ATLAS, touching upon recent results obtained.

  3. Nanobits - exchangable and customisable scanning probe tips

    DEFF Research Database (Denmark)

    Yildiz, Izzet

    Invention of atomic force microscopy (AFM) pioneered a novel aspect for the surface metrology concept. A range of scanning probe methods have been developed over the years based on different sorts of tip-surface interaction: electrical, optical, thermal, force. Reproducible and fast fabrication......Bits were investigated by imaging optical gratings. In most cases, the NanoBits showed better performance than the standard pyramid AFM probes, and long scan experiments proved that (i) the NanoBits did not get blunt even after 100 scans (continuous 30 h imaging), and (ii) stiction into the slit...

  4. Gigahertz-band electronically scanned antennas

    Science.gov (United States)

    Bei, Nikolai A.

    2000-12-01

    Foundation and principles of radio lenses construction of centimeter and millimeter wave ranges with controlled refracting index, combining the quality of phased array antennas with optical devices are stated. Possibilities of the electronically scanning with wide-angle sector and high gain are maintained. Construction principles of scanning antennas with controlled lenses, combining the quality of phased array antennas with optical devices, are stated. Possibilities of electronically scanning with broad angle sector and high gain are maintained. Some examples of construction of antennas millimeter range of waves are listed here.

  5. Confocal Scanning Microscope for Nuclear Photoemulsion

    CERN Document Server

    Batusov, Yu A; Soroko, L M

    2005-01-01

    The application of the confocal scanning microscope to the objects in the nuclear photoemulsion is described. An array of 27 microtomograms of {\\it single} silver grain is shown. The cross sections of the same particle track of diameter 1 $\\mu$m, detected by means of the confocal scanning microscope with open and annular apertures, are presented. It was shown that the confocal scanning microscope opens indeed new opportunities for the nuclear photoemulsion technique to get previously inaccessible information for physics of the short-living particles.

  6. Correlation Imaging with Arbitrary Sampling Trajectories

    Science.gov (United States)

    Li, Yu

    2014-01-01

    The presented work aims to develop a generalized linear approach to image reconstruction with arbitrary sampling trajectories for high-speed MRI. This approach is based on a previously developed image reconstruction framework, "correlation imaging" (1). In the presented work, correlation imaging with arbitrary sampling trajectories is implemented in a multi-dimensional hybrid space that is formed from the physical sampling space and a virtually defined space. By introducing an undersampling trajectory with both uniformity and randomness in the hybrid space, correlation imaging may take advantage of multiple image reconstruction mechanisms including coil sensitivity encoding, data sparsity and information sharing. This hybrid-space implementation is demonstrated in multi-slice 2D imaging, multi-scan imaging, and radial dynamic imaging. Since more information is used in image reconstruction, it is found that hybrid-space correlation imaging outperforms several conventional techniques. The presented approach will benefit clinical MRI by enabling correlation imaging to be used to accelerate multi-scan clinical protocols that need different sampling trajectories in different scans. PMID:24629517

  7. Investigation of the potential causes of partial scan artifacts in dynamic CT myocardial perfusion imaging

    Science.gov (United States)

    Tao, Yinghua; Speidel, Michael; Szczykutowicz, Timothy; Chen, Guang-Hong

    2014-03-01

    In recent years, there have been several findings regarding CT number variations (partial scan artifact or PSA) across time in dynamic myocardial perfusion studies with short scan gated reconstruction. These variations are correlated with the view angle range corresponding to the short scan acquisition for a given cardiac phase, which can vary from one cardiac cycle to another due to the asynchrony between heart rate and gantry rotation speed. In this study, we investigate several potential causes of PSA, including noise, beam hardening and scatter, using numerical simulations. In addition, we investigate partial scan artifact in a single source 64-slice diagnostic CT scanner in vivo data sets, and report its effect on perfusion analysis. Results indicated that among all three factors investigated, scatter can cause obvious partial scan artifact in dynamic myocardial perfusion imaging. Further, scatter is a low frequency phenomenon and is not heavily dependent on the changing contrasts, as both the frequency method and the virtual scan method are effective in reducing partial scan artifact. However, PSA does not necessarily lead to different blood volume maps compared to the full scan, because these maps are usually generated with a curve fitting procedure.

  8. Experimental investigations of the scanning functions of galvanometer-based scanners with applications in OCT.

    Science.gov (United States)

    Duma, Virgil-Florin; Lee, Kye-sung; Meemon, Panomsak; Rolland, Jannick P

    2011-10-10

    We analyze the three most common profiles of scanning functions for galvanometer-based scanners (GSs): the sawtooth, triangular and sinusoidal functions. They are determined experimentally with regard to the scan parameters of the input signal (i.e., frequency and amplitude). We study the differences of the output function of the GS measured as the positional error of the oscillatory mirror from the ideal function given by the input signal of the device. The limits in achieving the different types of scanning functions in terms of duty cycle and linearity are determined experimentally for the possible range of scan parameters. Of particular importance are the preservation of an imposed duty cycle and profile for the sawtooth function, the quantification of the linearity for the sinusoidal function, and the effective duty cycle for the triangular, as well as for the other functions. The range of scan amplitudes for which the stability of the oscillatory regime of the galvo mirror is stable for different frequencies is also highlighted. While the use of the device in certain scanning regimes is studied, certain rules of thumb are deduced to make the best out of the galvoscanner. Finally, the three types of scanning functions are tested with a Fourier domain optical coherence tomography (FD OCT) setup and the conclusions of the study are demonstrated in an imaging application by correlating the determined limits of the scanning regimes with the requirements of OCT.

  9. Visual rehabilitation: visual scanning, multisensory stimulation and vision restoration trainings

    Directory of Open Access Journals (Sweden)

    Neil M. Dundon

    2015-07-01

    Full Text Available Neuropsychological training methods of visual rehabilitation for homonymous vision loss caused by postchiasmatic damage fall into two fundamental paradigms: compensation and restoration. Existing methods can be classified into three groups: Visual Scanning Training (VST, Audio-Visual Scanning Training (AViST and Vision Restoration Training (VRT. VST and AViST aim at compensating vision loss by training eye scanning movements, whereas VRT aims at improving lost vision by activating residual visual functions by training light detection and discrimination of visual stimuli. This review discusses the rationale underlying these paradigms and summarizes the available evidence with respect to treatment efficacy. The issues raised in our review should help guide clinical care and stimulate new ideas for future research uncovering the underlying neural correlates of the different treatment paradigms. We propose that both local within-system interactions (i.e., relying on plasticity within peri-lesional spared tissue and changes in more global between-system networks (i.e., recruiting alternative visual pathways contribute to both vision restoration and compensatory rehabilitation that ultimately have implications for the rehabilitation of cognitive functions.

  10. Scanning probe microscopy at video-rate

    Directory of Open Access Journals (Sweden)

    Georg Schitter

    2008-01-01

    Full Text Available Recent results have demonstrated the feasibility of video-rate scanning tunneling microscopy and video-rate atomic force microscopy. The further development of this technology will enable the direct observation of many dynamic processes that are impossible to observe today with conventional Scanning Probe Microscopes (SPMs. Examples are atom and molecule diffusion processes, the motion of molecular motors, real-time film growth, and chemical or catalytic reactions. Video-rate scanning probe technology might also lead to the extended application of SPMs in industry, e.g. for process control. In this paper we discuss the critical aspects that have to be taken into account for improving the imaging speed of SPMs. We point out the required instrumentation efforts, give an overview of the state of the art in high-speed scanning technology and discuss the required future developments for imaging at video-rates.

  11. EO Scanned Micro-LADAR Project

    Data.gov (United States)

    National Aeronautics and Space Administration — In this phase II SBIR we will design, build, test, and deliver new scanning based micro-ladar sensors with unprecedented small size, weight, and power (SWaP),...

  12. EO Scanned Micro-LADAR Project

    Data.gov (United States)

    National Aeronautics and Space Administration — In this SBIR program we will develop, design and build new scanning based micro-ladar sensors with unprecedented small size, weight, and power (SWaP), thereby...

  13. Getting a CAT Scan (For Kids)

    Medline Plus

    Full Text Available ... for Kids for Teens Kids Home How the Body Works Puberty & Growing Up Staying Healthy Recipes & Cooking ... computer pictures of what's going on inside your body. The scan itself is painless. All you'll ...

  14. Getting a CAT Scan (For Kids)

    Medline Plus

    Full Text Available ... computer pictures of what's going on inside your body. The scan itself is painless. All you'll need to do is hold ... All rights reserved. Images provided by The Nemours Foundation, iStock, Getty Images, ...

  15. New Microscope Scans Breast Tumors During Surgery

    Science.gov (United States)

    ... https://medlineplus.gov/news/fullstory_166925.html New Microscope Scans Breast Tumors During Surgery The instrument examines ... WEDNESDAY, June 28, 2017 (HealthDay News) -- A new microscope could help surgeons remove breast tumors completely, reducing ...

  16. Frequency Scanned Interferometry for ILC Tracker Alignment

    CERN Document Server

    Yang, Hai-Jun; Riles, Keith

    2011-01-01

    In this paper, we report high-precision absolute distance and vibration measurements performed with frequency scanned interferometry. Absolute distance was determined by counting the interference fringes produced while scanning the laser frequency. High-finesse Fabry-Perot interferometers were used to determine frequency changes during scanning. A dual-laser scanning technique was used to cancel drift errors to improve the absolute distance measurement precision. A new dual-channel FSI demonstration system is also presented which is an interim stage toward practical application of multi-channel distance measurement. Under realistic conditions, a precision of 0.3 microns was achieved for an absolute distance of 0.57 meters. A possible optical alignment system for a silicon tracker is also presented.

  17. Intelligent Classification and Visualization of Network Scans

    Energy Technology Data Exchange (ETDEWEB)

    Chen, L; Muelder, C; Ma, K; Bartoletti, A

    2007-03-01

    Network scans are a common first step in a network intrusion attempt. In order to gain information about a potential network intrusion, it is beneficial to analyze these network scans. Statistical methods such as wavelet scalogram analysis have been used along with visualization techniques in previous methods. However, applying these statistical methods to reduce the data causes a substantial amount of data loss. This paper presents a study of using associative memory learning techniques to directly compare network scans in order to create a classification which can be used by itself or in conjunction with existing visualization techniques to better characterize the sources of these scans. This produces an integrated system of visual and intelligent analysis which is applicable to real world data.

  18. Indium-111 leukocyte scanning and fracture healing

    Energy Technology Data Exchange (ETDEWEB)

    Mead, L.P.; Scott, A.C.; Bondurant, F.J.; Browner, B.D. (Univ. of Texas Medical School, Houston (USA))

    1990-01-01

    This study was undertaken to determine the specificity of indium-111 leukocyte scans for osteomyelitis when fractures are present. Midshaft tibial osteotomies were performed in 14 New Zealand white rabbits, seven of which were infected postoperatively with Staphylococcus aureus per Norden's protocol. All 14 rabbits were scanned following injection with 75 microCi of indium 111 at 72 h after osteotomy and at weekly intervals for 4 weeks. Before the rabbits were killed, the fracture sites were cultured to document the presence or absence of infection. The results of all infected osteotomy sites were positive, whereas no positive scans were found in the noninfected osteotomies. We concluded from this study that uncomplicated fracture healing does not result in a positive indium-111 leukocyte scan.

  19. The design of laser scanning galvanometer system

    Science.gov (United States)

    Sun, Xiaoling; Zhou, Bin; Xie, Weihao; Zhang, Yuangeng

    2015-02-01

    In this paper, we designed the laser scanning galvanometer system according to our requirements. Based on scanning range of our laser scanning galvanometer system, the design parameters of this system were optimized. During this work, we focused on the design of the f-θ field lens. An optical system of patent lens in the optical manual book, which had three glasses structure, was used in our designs. Combining the aberration theory, the aberration corrections and image quality evaluations were finished using Code V optical design software. An optimum f-θ field lens was designed, which had focal length of 434 mm, pupil diameter of 30 mm, scanning range of 160 mm × 160 mm, and half field angle of 18°×18°. At the last, we studied the influences of temperature changes on our system.

  20. Can Scans Predict Some Autism Cases?

    Science.gov (United States)

    ... news/fullstory_167668.html Can Scans Predict Some Autism Cases? When the disorder is caused by a ... News) -- People with a particular genetic cause of autism show structural abnormalities in the brain that are ...

  1. System and Method for Scan Range Gating

    Science.gov (United States)

    Zuk, David M. (Inventor); Lindemann, Scott (Inventor)

    2017-01-01

    A system for scanning light to define a range gated signal includes a pulsed coherent light source that directs light into the atmosphere, a light gathering instrument that receives the light modified by atmospheric backscatter and transfers the light onto an image plane, a scanner that scans collimated light from the image plane to form a range gated signal from the light modified by atmospheric backscatter, a control circuit that coordinates timing of a scan rate of the scanner and a pulse rate of the pulsed coherent light source so that the range gated signal is formed according to a desired range gate, an optical device onto which an image of the range gated signal is scanned, and an interferometer to which the image of the range gated signal is directed by the optical device. The interferometer is configured to modify the image according to a desired analysis.

  2. Nanoscale thermometry by scanning thermal microscopy

    Science.gov (United States)

    Menges, Fabian; Riel, Heike; Stemmer, Andreas; Gotsmann, Bernd

    2016-07-01

    Measuring temperature is a central challenge in nanoscience and technology. Addressing this challenge, we report the development of a high-vacuum scanning thermal microscope and a method for non-equilibrium scanning probe thermometry. The microscope is built inside an electromagnetically shielded, temperature-stabilized laboratory and features nanoscopic spatial resolution at sub-nanoWatt heat flux sensitivity. The method is a dual signal-sensing technique inferring temperature by probing a total steady-state heat flux simultaneously to a temporally modulated heat flux signal between a self-heated scanning probe sensor and a sample. Contact-related artifacts, which so far limit the reliability of nanoscopic temperature measurements by scanning thermal microscopy, are minimized. We characterize the microscope's performance and demonstrate the benefits of the new thermometry approach by studying hot spots near lithographically defined constrictions in a self-heated metal interconnect.

  3. Scanning probe methods applied to molecular electronics

    OpenAIRE

    Pavliček, Niko

    2013-01-01

    Scanning probe methods on insulating films offer a rich toolbox to study electronic, structural and spin properties of individual molecules. This work discusses three issues in the field of molecular and organic electronics. A scanning tunneling microscopy (STM) head to be operated in high magnetic fields has been designed and built up. The STM head is very compact and rigid relying on a robust coarse approach mechanism. This will facilitate investigations of the spin properties of individ...

  4. Scanning probe microscopy on new dental alloys

    Science.gov (United States)

    Reusch, B.; Geis-Gerstorfer, J.; Ziegler, C.

    Surface analytical methods such as scanning force microscopy (SFM), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) were used to determine the surface properties of amalgam substitutes as tooth filling materials. In particular the corrosion and the passivation behavior of new gallium restorative materials were studied. To give relevant practical data, the measurements were performed with and without the alloys being stored in artificial saliva to simulate physiological oral conditions.

  5. Galvanometer scanning technology for laser additive manufacturing

    Science.gov (United States)

    Luo, Xi; Li, Jin; Lucas, Mark

    2017-02-01

    A galvanometer laser beam scanning system is an essential element in many laser additive manufacturing (LAM) technologies including Stereolithography (SLA), Selective Laser Sintering (SLS) and Selective Laser Melting (SLM). Understanding the laser beam scanning techniques and recent innovations in this field will greatly benefit the 3D laser printing system integration and technology advance. One of the challenges to achieve high quality 3D printed parts is due to the non-uniform laser power density delivered on the materials caused by the acceleration and deceleration movements of the galvanometer at ends of the hatching and outlining patterns. One way to solve this problem is to modulate the laser power as the function of the scanning speed during the acceleration or deceleration periods. Another strategy is to maintain the constant scanning speed while accurately coordinating the laser on and off operation throughout the job. In this paper, we demonstrate the high speed, high accuracy and low drift digital scanning technology that incorporates both techniques to achieve uniform laser density with minimal additional process development. With the constant scanning speed method, the scanner not only delivers high quality and uniform results, but also a throughput increase of 23% on a typical LAM job, compared to that of the conventional control method that requires galvanometer acceleration and deceleration movements.

  6. Role of bone scan in rheumatic disease

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Yun Young [Hanyang University College of Medicine, Seoul (Korea, Republic of)

    2003-06-01

    Rheumatic diseases can be categorized by pathology into several specific types of musculoskeletal problems, including synovitis (e.g. rheumatoid arthritis), enthesopathy (e.g. ankylosing spondylitis) and cartilage degeneration (e.g. osteoarthritis). Skeletal radiographs have contributed to the diagnosis of these articular diseases, and some disease entities need typical radiographic changes as a factor of the diagnostic criteria. However, they sometimes show normal radiographic findings in the early stage of disease, when there is demineralization of less than 30-50%. Bone scans have also been used in arthritis, but not widely because the findings are nonspecific and it is thought that bone scans do not add significant information to routine radiography. Bone scans do however play a different role than simple radiography, and it is a complementary imaging method in the course of management of arthritis. The image quality of bone scans can be improved by obtaining regional views and images under al pin-hole collimator, and through a variety of scintigraphic techniques including the three phase bone scan and bone SPECT. Therefore, bone scans could improve the diagnostic value, and answer multiple clinical questions, based on the pathophysiology of various forms of arthritis.

  7. Global Fits of the CKM Matrix with the SCAN Method

    CERN Document Server

    Eigen, G; Hitlin, D G; Porter, F C

    2015-01-01

    We present a Scan Method analysis of the allowed region of the rho bar - eta bar plane using the latest input measurements of the CKM matrix elements, sin 2 beta, B0(s,d) mixing, epsilon(K), alpha and gamma. In this approach, we make no assumptions as to the distribution of theory uncertainties; rather, we scan over the range of plausible theoretical uncertainties and determine confidence level contours in the rho bar eta bar plane. We determine alpha from branching fraction and CP asymmetry measurements of B decays to all light pseudoscalar-pseudoscalar, pesudoscalar-vector, vector-vector and a1-psudoscalar mesons and determine gamma from D(*)K(*), D(*) pi and D rho modes, thereby including correlations between the angles of the unitarity triangle. We parametrize the individual decay amplitudes in terms of color-allowed tree, color-suppressed tree, gluonic penguin, singlet penguin, electroweak penguin, as well as W-exchange and W-annihilation amplitudes. Our procedure accounts for all correlations among the ...

  8. Role of high resolution multislice CT scan in otosclerosis

    Directory of Open Access Journals (Sweden)

    Atef EL Maraghy

    2015-11-01

    Full Text Available This prospective study was carried out to assess the radiological findings in patients with otosclerosis using high resolution multislice CT scan and to correlate these findings with audiological findings in those patients. This study was done at Al Azhar University hospitals during the period from Jan 2012 to Jun 2014. Thirty-two patients were enrolled in this study; 13 (40.63% males and 19 (59.37% females. Their age ranged from 13 to 55 with a mean of 36.21 ± 8.7 years. Written consent was taken from all patients. Multislice CT scan was done to all patients and reports were done by computer assisted analysis with thorough audiological assessment including pure tone audiometry, tympanometry and stapedial reflex. Positive findings were present in 40/58 ears (69% while negative findings were present in 18/58 ears (31%. Otosclerotic foci were more detected when slice thickness was lesser than one millimeter especially at fissula ante fenestrum and round window region. There was a good correlation between air bone gap and CT score (p = 0.002. High resolution multislice CT helps in the diagnosis of otosclerosis with sensitivity (69% and it aids in the diagnosis of doubtful cases. Otosclerosis has a special predilection to affect certain sites mainly the fissula ante fenestrum followed by the round window and the cochlear promontory.

  9. B-scan ultrasonography following open globe repair.

    Science.gov (United States)

    Andreoli, M T; Yiu, G; Hart, L; Andreoli, C M

    2014-04-01

    To examine the accuracy and predictive ability of B-scan ultrasonography in the post-repair assessment of an open globe injury. In all, 965 open globe injuries treated at the Massachusetts Eye and Ear Infirmary between 1 January 2000 and 1 June 2010 were retrospectively reviewed. A total of 427 ultrasound reports on 210 patients were analyzed. Ultrasound reports were examined for the following characteristics: vitreous hemorrhage, vitreous tag, retinal tear, RD (including subcategories total RD, partial RD, closed funnel RD, open funnel RD, and chronic RD), vitreous traction, vitreous debris, serous choroidal detachment, hemorrhagic choroidal detachment, kissing choroidal detachment, dislocated crystalline lens, dislocated intraocular lens (IOL), disrupted crystalline lens, intraocular foreign body (IOFB), intraocular air, irregular posterior globe contour, disorganized posterior intraocular contents, posterior vitreous detachment, choroidal vs retinal detachment, vitreal membranes, and choroidal thickening. The main outcome measure was visual outcome at final follow-up. Among 427 B-scan reports, there were a total of 57 retinal detachments, 19 retinal tears, 18 vitreous traction, 59 serous choroidal detachments, 47 hemorrhagic choroidal detachments, and 10 kissing choroidal detachments. Of patients with multiple studies, 26% developed retinal detachments or retinal tears on subsequent scans. Ultrasound had 100% positive predictive value for diagnosing retinal detachment and IOFB. The diagnoses of retinal detachment, disorganized posterior contents, hemorrhagic choroidal detachment, kissing choroidal detachment, and irregular posterior contour were associated with worse visual acuity at final follow-up. Disorganized posterior contents correlated with particularly poor outcomes. B-scan ultrasonography is a proven, cost-effective imaging modality in the management of an open globe injury. This tool can offer both diagnostic and prognostic information, useful for both

  10. The scanning ion conductance microscope for cellular physiology.

    Science.gov (United States)

    Lab, Max J; Bhargava, Anamika; Wright, Peter T; Gorelik, Julia

    2013-01-01

    The quest for nonoptical imaging methods that can surmount light diffraction limits resulted in the development of scanning probe microscopes. However, most of the existing methods are not quite suitable for studying biological samples. The scanning ion conductance microscope (SICM) bridges the gap between the resolution capabilities of atomic force microscope and scanning electron microscope and functional capabilities of conventional light microscope. A nanopipette mounted on a three-axis piezo-actuator, scans a sample of interest and ion current is measured between the pipette tip and the sample. The feedback control system always keeps a certain distance between the sample and the pipette so the pipette never touches the sample. At the same time pipette movement is recorded and this generates a three-dimensional topographical image of the sample surface. SICM represents an alternative to conventional high-resolution microscopy, especially in imaging topography of live biological samples. In addition, the nanopipette probe provides a host of added modalities, for example using the same pipette and feedback control for efficient approach and seal with the cell membrane for ion channel recording. SICM can be combined in one instrument with optical and fluorescent methods and allows drawing structure-function correlations. It can also be used for precise mechanical force measurements as well as vehicle to apply pressure with precision. This can be done on living cells and tissues for prolonged periods of time without them loosing viability. The SICM is a multifunctional instrument, and it is maturing rapidly and will open even more possibilities in the near future.

  11. Prediction of trabecular bone qualitative properties using scanning quantitative ultrasound

    Science.gov (United States)

    Qin, Yi-Xian; Lin, Wei; Mittra, Erik; Xia, Yi; Cheng, Jiqi; Judex, Stefan; Rubin, Clint; Müller, Ralph

    2012-01-01

    Microgravity induced bone loss represents a critical health problem in astronauts, particularly occurred in weight-supporting skeleton, which leads to osteopenia and increase of fracture risk. Lack of suitable evaluation modality makes it difficult for monitoring skeletal status in long term space mission and increases potential risk of complication. Such disuse osteopenia and osteoporosis compromise trabecular bone density, and architectural and mechanical properties. While X-ray based imaging would not be practical in space, quantitative ultrasound may provide advantages to characterize bone density and strength through wave propagation in complex trabecular structure. This study used a scanning confocal acoustic diagnostic and navigation system (SCAN) to evaluate trabecular bone quality in 60 cubic trabecular samples harvested from adult sheep. Ultrasound image based SCAN measurements in structural and strength properties were validated by μCT and compressive mechanical testing. This result indicated a moderately strong negative correlations observed between broadband ultrasonic attenuation (BUA) and μCT-determined bone volume fraction (BV/TV, R2=0.53). Strong correlations were observed between ultrasound velocity (UV) and bone’s mechanical strength and structural parameters, i.e., bulk Young’s modulus (R2=0.67) and BV/TV (R2=0.85). The predictions for bone density and mechanical strength were significantly improved by using a linear combination of both BUA and UV, yielding R2=0.92 for BV/TV and R2=0.71 for bulk Young’s modulus. These results imply that quantitative ultrasound can characterize trabecular structural and mechanical properties through measurements of particular ultrasound parameters, and potentially provide an excellent estimation for bone’s structural integrity. PMID:23976803

  12. Prediction of trabecular bone qualitative properties using scanning quantitative ultrasound

    Science.gov (United States)

    Qin, Yi-Xian; Lin, Wei; Mittra, Erik; Xia, Yi; Cheng, Jiqi; Judex, Stefan; Rubin, Clint; Müller, Ralph

    2013-11-01

    Microgravity induced bone loss represents a critical health problem in astronauts, particularly occurred in weight-supporting skeleton, which leads to osteopenia and increase of fracture risk. Lack of suitable evaluation modality makes it difficult for monitoring skeletal status in long term space mission and increases potential risk of complication. Such disuse osteopenia and osteoporosis compromise trabecular bone density, and architectural and mechanical properties. While X-ray based imaging would not be practical in space, quantitative ultrasound may provide advantages to characterize bone density and strength through wave propagation in complex trabecular structure. This study used a scanning confocal acoustic diagnostic and navigation system (SCAN) to evaluate trabecular bone quality in 60 cubic trabecular samples harvested from adult sheep. Ultrasound image based SCAN measurements in structural and strength properties were validated by μCT and compressive mechanical testing. This result indicated a moderately strong negative correlations observed between broadband ultrasonic attenuation (BUA) and μCT-determined bone volume fraction (BV/TV, R2=0.53). Strong correlations were observed between ultrasound velocity (UV) and bone's mechanical strength and structural parameters, i.e., bulk Young's modulus (R2=0.67) and BV/TV (R2=0.85). The predictions for bone density and mechanical strength were significantly improved by using a linear combination of both BUA and UV, yielding R2=0.92 for BV/TV and R2=0.71 for bulk Young's modulus. These results imply that quantitative ultrasound can characterize trabecular structural and mechanical properties through measurements of particular ultrasound parameters, and potentially provide an excellent estimation for bone's structural integrity.

  13. Indium-111-labeled leukocyte scan in detection of synthetic vascular graft infection: The effect of antibiotic treatment

    Energy Technology Data Exchange (ETDEWEB)

    Chung, C.J.; Hicklin, O.A.; Payan, J.M.; Gordon, L. (Medical Univ. of South Carolina, Charleston (USA))

    1991-01-01

    To determine the sensitivity and specificity of the indium-111-({sup 111}In) labeled leukocyte scan for prosthetic vascular graft infection in patients treated with antibiotic therapy, a retrospective study was performed. Of 41 consecutive {sup 111}In-labeled leukocyte scans performed to evaluate possible vascular graft infection, 23 scans were performed in patients treated with antibiotics. The average duration of antibiotic therapy was 21 days. Twelve positive and 11 negative scans for graft infection were found. By surgical and autopsy correlation of all positive cases, and clinical correlation (of all negative cases), there were 10 true-positive, 11 true-negative, 2 false-positive, and no false-negative scans for graft infections, for an overall sensitivity of 100% and specificity of 85%.

  14. Increase in dicentric chromosome formation after a single CT scan in adults.

    Science.gov (United States)

    Abe, Yu; Miura, Tomisato; Yoshida, Mitsuaki A; Ujiie, Risa; Kurosu, Yumiko; Kato, Nagisa; Katafuchi, Atsushi; Tsuyama, Naohiro; Ohba, Takashi; Inamasu, Tomoko; Shishido, Fumio; Noji, Hideyoshi; Ogawa, Kazuei; Yokouchi, Hiroshi; Kanazawa, Kenya; Ishida, Takashi; Muto, Satoshi; Ohsugi, Jun; Suzuki, Hiroyuki; Ishikawa, Tetsuo; Kamiya, Kenji; Sakai, Akira

    2015-09-09

    Excess risk of leukemia and brain tumors after CT scans in children has been reported. We performed dicentric chromosome assay (DCAs) before and after CT scan to assess effects of low-dose ionizing radiation on chromosomes. Peripheral blood (PB) lymphocytes were collected from 10 patients before and after a CT scan. DCA was performed by analyzing either 1,000 or 2,000 metaphases using both Giemsa staining and centromere-fluorescence in situ hybridization (Centromere-FISH). The increment of DIC formation was compared with effective radiation dose calculated using the computational dosimetry system, WAZA-ARI and dose length product (DLP) in a CT scan. Dicentric chromosome (DIC) formation increased significantly after a single CT scan, and increased DIC formation was found in all patients. A good correlation between the increment of DIC formation determined by analysis of 2,000 metaphases using Giemsa staining and those by 2,000 metaphases using Centromere-FISH was observed. However, no correlation was observed between the increment of DIC formation and the effective radiation dose. Therefore, these results suggest that chromosome cleavage may be induced by one CT scan, and we recommend 2,000 or more metaphases be analyzed in Giemsa staining or Centromere-FISH for DCAs in cases of low-dose radiation exposure.

  15. Scan path entropy and Arrow plots: Capturing scanning behavior of multiple observers

    Directory of Open Access Journals (Sweden)

    Ignace T C Hooge

    2013-12-01

    Full Text Available Designers of visual communication material want their material to attract and retain attention. In marketing research, heat maps, dwell time, and time to AOI first hit are often used as evaluation parameters. Here we present two additional measures 1 scan path entropy to quantify gaze guidance and 2 the arrow plot to visualize the average scan path. Both are based on string representations of scan paths. The latter also incorporates transition matrices and time required for 50% of the observers to first hit AOIs (T50. The new measures were tested in an eye tracking study (48 observers, 39 advertisements. Scan path entropy is a sensible measure for gaze guidance and the new visualization method reveals aspects of the average scan path and gives a better indication in what order global scanning takes place.

  16. Scanning-time evaluation of Digimarc Barcode

    Science.gov (United States)

    Gerlach, Rebecca; Pinard, Dan; Weaver, Matt; Alattar, Adnan

    2015-03-01

    This paper presents a speed comparison between the use of Digimarc® Barcodes and the Universal Product Code (UPC) for customer checkout at point of sale (POS). The recently introduced Digimarc Barcode promises to increase the speed of scanning packaged goods at POS. When this increase is exploited by workforce optimization systems, the retail industry could potentially save billions of dollars. The Digimarc Barcode is based on Digimarc's watermarking technology, and it is imperceptible, very robust, and does not require any special ink, material, or printing processes. Using an image-based scanner, a checker can quickly scan consumer packaged goods (CPG) embedded with the Digimarc Barcode without the need to reorient the packages with respect to the scanner. Faster scanning of packages saves money and enhances customer satisfaction. It reduces the length of the queues at checkout, reduces the cost of cashier labor, and makes self-checkout more convenient. This paper quantifies the increase in POS scanning rates resulting from the use of the Digimarc Barcode versus the traditional UPC. It explains the testing methodology, describes the experimental setup, and analyzes the obtained results. It concludes that the Digimarc Barcode increases number of items per minute (IPM) scanned at least 50% over traditional UPC.

  17. About infrared scanning of photovoltaic solar plant

    Science.gov (United States)

    Kauppinen, T.; Panouillot, P.-E.; Siikanen, S.; Athanasakou, E.; Baltas, P.; Nikopoulous, B.

    2015-05-01

    The paper is discussing about infrared scanning of PV solar plants. It is important that the performance of each solar panel and cell is verified. One new possibility compared to traditional ground-based scanning (handheld camera) is the utilization of UAV (Unmanned Aerial Vehicle). In this paper results from a PV solar Plant in Western Greece are introduced. The nominal power of the solar plants were 0, 9 MW and 2 MW and they were scanned both by a ground-controlled drone and by handheld equipment. It is essential to know all the factors effecting to results and also the time of scanning is important. The results done from the drone and from ground-based scanning are compared; also results from various altitudes and time of day are discussed. The UAV (Unmanned Aerial Vehicle/RPAS (Remote Piloted Aircraft Systems) will give an excellent opportunity to monitor various targets which are impossible or difficult to access from the ground. Compared to fixed-wing and helicopter-based platforms it will give advantages but also this technology has limitations. One limitation is the weight of the equipment and the short operational range and short flight time. Also valid procedures must be created for different solutions in the future. The most important thing, as in all infrared thermography applications, is the proper interpretation of results.

  18. Coronal CT scan of paranasal sinuses; Long survey after Caldwell-Luc operation

    Energy Technology Data Exchange (ETDEWEB)

    Ikeda, Atsuko (Tokyo Metropolitan Komagome Hospital (Japan)); Ikeda, Motohisa; Watanabe, Isamu; Komatsuzaki, Atsushi

    1994-03-01

    The clinical features were correlated with the coronal CT scan appearance of the paranasal sinuses of 49 patients who had received the Caldwell-Luc operation 16 to 58 years ago. The clinical diagnosis at the time of the CT scan was postoperative maxillary cyst in 22 patients, chronic sinusitis in 21 patients, trigeminal neuralgia in 3 patients, radicular cyst, postoperative ethmoid cyst and inverted papilloma in one patient each. The CT scans of the 91 operated maxillary sinuses showed obliterated cavity in 21 cases, small cavity in 46 cases, and cystic formation in 24 cases. The authors speculated that some maxillary sinuses which appeared in CT scans as small cavities might cause the clinical symptoms of postoperative maxillary cyst in the future. (author).

  19. Virtual animation of victim-specific 3D models obtained from CT scans for forensic reconstructions: Living and dead subjects.

    Science.gov (United States)

    Villa, C; Olsen, K B; Hansen, S H

    2017-09-01

    Post-mortem CT scanning (PMCT) has been introduced at several forensic medical institutions many years ago and has proved to be a useful tool. 3D models of bones, skin, internal organs and bullet paths can rapidly be generated using post-processing software. These 3D models reflect the individual physiognomics and can be used to create whole-body 3D virtual animations. In such way, virtual reconstructions of the probable ante-mortem postures of victims can be constructed and contribute to understand the sequence of events. This procedure is demonstrated in two victims of gunshot injuries. Case #1 was a man showing three perforating gunshot wounds, who died due to the injuries of the incident. Whole-body PMCT was performed and 3D reconstructions of bones, relevant internal organs and bullet paths were generated. Using 3ds Max software and a human anatomy 3D model, a virtual animated body was built and probable ante-mortem postures visualized. Case #2 was a man presenting three perforating gunshot wounds, who survived the incident: one in the left arm and two in the thorax. Only CT scans of the thorax, abdomen and the injured arm were provided by the hospital. Therefore, a whole-body 3D model reflecting the anatomical proportions of the patient was made combining the actual bones of the victim with those obtained from the human anatomy 3D model. The resulted 3D model was used for the animation process. Several probable postures were also visualized in this case. It has be shown that in Case #1 the lesions and the bullet path were not consistent with an upright standing position; instead, the victim was slightly bent forward, i.e. he was sitting or running when he was shot. In Case #2, one of the bullets could have passed through the arm and continued into the thorax. In conclusion, specialized 3D modelling and animation techniques allow for the reconstruction of ante-mortem postures based on both PMCT and clinical CT. Copyright © 2017 Elsevier B.V. All rights

  20. Visual Scanning Patterns and Executive Function in Relation to Facial Emotion Recognition in Aging

    Science.gov (United States)

    Circelli, Karishma S.; Clark, Uraina S.; Cronin-Golomb, Alice

    2012-01-01

    Objective The ability to perceive facial emotion varies with age. Relative to younger adults (YA), older adults (OA) are less accurate at identifying fear, anger, and sadness, and more accurate at identifying disgust. Because different emotions are conveyed by different parts of the face, changes in visual scanning patterns may account for age-related variability. We investigated the relation between scanning patterns and recognition of facial emotions. Additionally, as frontal-lobe changes with age may affect scanning patterns and emotion recognition, we examined correlations between scanning parameters and performance on executive function tests. Methods We recorded eye movements from 16 OA (mean age 68.9) and 16 YA (mean age 19.2) while they categorized facial expressions and non-face control images (landscapes), and administered standard tests of executive function. Results OA were less accurate than YA at identifying fear (precognition of sad expressions and with scanning patterns for fearful, sad, and surprised expressions. Conclusion We report significant age-related differences in visual scanning that are specific to faces. The observed relation between scanning patterns and executive function supports the hypothesis that frontal-lobe changes with age may underlie some changes in emotion recognition. PMID:22616800

  1. Appraisal of the impact of environmental scanning on corporate performance in selected Nigerian banks

    Directory of Open Access Journals (Sweden)

    Olu Ojo

    2008-05-01

    Full Text Available This research study examines the Impact of Environmental Scanning on Corporate Performancein Selected Nigerian Banks. Our goal was to establish whether the knowledge of organizations environmentand its scanning has any relationship with corporate performance.This research was conducted to increase our level of understanding of the subject investigated andto add to the existing literature on the subject especially in the Third World countries where such study isnot popular.Survey research method was used in carrying out the study. Analysis was done using Difference ofMean and Pearson Correlation Coefficient with the aid of Statistical Package for Social Sciences.From the study, the findings show that environmental scanning firms outperform non- scanningfirms, that information derived from environmental scanning is increasingly been used to drive the strategicmanagement process, that managers have a significant knowledge of their environment, that the fold upof some banks in the Nigerian banking industry was due to its inefficiencies in scanning its environmentfor threats and opportunities and that the scanning intensity in each sector is based on the level of perceivedstrategic uncertainty in each of these sectors.Base on the findings of the study, recommendations were made that more financial resources shouldbe provided by organisation to put the required systems in place for environmental scanning.

  2. Analysis of the Impact of Source Region Structures on Seismological Parameter Scanning

    Institute of Scientific and Technical Information of China (English)

    Chen Yuwei; Wang Xingzhou; Miao Peng; Chen Anguo; Li Lingli; Hong Dequan

    2010-01-01

    By taking moderate-strong earthquakes in South,North and West China as the research subjects and taking into consideration the fault strikes in these regions,this paper selects 8kinds of seismology indexes with clear physical significance and strong independence to carry out spatial scanning of the parallel,vertical and oblique slip of fault along the fault strike.Based on the size of correlation coefficients between the scanning curve and source region curve we quantitatively analyze the difference between scan results among different slip modes and study the impact of fault strike in different tectonic divisions on scanning results and variation rules of seismological parameters.The results show that not only does the change of spatial parameters have a great influence on seismological parameter scanning,but so does the fault strike in the source region.This paper presents the optimum condition parameters with least spatial influencing scanning scope for different magnitude seismology indexes and analyzes the possible influence of fault strike on seismological parameter scanning results.

  3. Calibration-free quantitative surface topography reconstruction in scanning electron microscopy

    NARCIS (Netherlands)

    Faber, E.T.; Martinez-Martinez, D.; Mansilla, C.; Ocelik, V.; De Hosson, J. Th. M.

    2015-01-01

    This work presents a new approach to obtain reliable surface topography reconstructions from 2D Scanning Electron Microscopy (SEM) images. In this method a set of images taken at different tilt angles are compared by means of digital image correlation (DlC). It is argued that the strength of the met

  4. Conductivity map from scanning tunneling potentiometry

    Science.gov (United States)

    Zhang, Hao; Li, Xianqi; Chen, Yunmei; Durand, Corentin; Li, An-Ping; Zhang, X.-G.

    2016-08-01

    We present a novel method for extracting two-dimensional (2D) conductivity profiles from large electrochemical potential datasets acquired by scanning tunneling potentiometry of a 2D conductor. The method consists of a data preprocessing procedure to reduce/eliminate noise and a numerical conductivity reconstruction. The preprocessing procedure employs an inverse consistent image registration method to align the forward and backward scans of the same line for each image line followed by a total variation (TV) based image restoration method to obtain a (nearly) noise-free potential from the aligned scans. The preprocessed potential is then used for numerical conductivity reconstruction, based on a TV model solved by accelerated alternating direction method of multiplier. The method is demonstrated on a measurement of the grain boundary of a monolayer graphene, yielding a nearly 10:1 ratio for the grain boundary resistivity over bulk resistivity.

  5. Conductivity map from scanning tunneling potentiometry.

    Science.gov (United States)

    Zhang, Hao; Li, Xianqi; Chen, Yunmei; Durand, Corentin; Li, An-Ping; Zhang, X-G

    2016-08-01

    We present a novel method for extracting two-dimensional (2D) conductivity profiles from large electrochemical potential datasets acquired by scanning tunneling potentiometry of a 2D conductor. The method consists of a data preprocessing procedure to reduce/eliminate noise and a numerical conductivity reconstruction. The preprocessing procedure employs an inverse consistent image registration method to align the forward and backward scans of the same line for each image line followed by a total variation (TV) based image restoration method to obtain a (nearly) noise-free potential from the aligned scans. The preprocessed potential is then used for numerical conductivity reconstruction, based on a TV model solved by accelerated alternating direction method of multiplier. The method is demonstrated on a measurement of the grain boundary of a monolayer graphene, yielding a nearly 10:1 ratio for the grain boundary resistivity over bulk resistivity.

  6. Investigation into scanning tunnelling luminescence microscopy

    CERN Document Server

    Manson-Smith, S K

    2001-01-01

    This work reports on the development of a scanning tunnelling luminescence (STL) microscope and its application to the study of Ill-nitride semiconductor materials used in the production of light emitting devices. STL microscopy is a technique which uses the high resolution topographic imaging capabilities of the scanning tunnelling microscope (STM) to generate high resolution luminescence images. The STM tunnelling current acts as a highly localised source of electrons (or holes) which generates luminescence in certain materials. Light generated at the STM tunnelling junction is collected concurrently with the height variation of the tunnelling probe as it is scanned across a sample surface, producing simultaneous topographic and luminescence images. Due to the very localised excitation source, high resolution luminescence images can be obtained. Spectroscopic resolution can be obtained by using filters. Additionally, the variation of luminescence intensity with tunnel current and with bias voltage can provi...

  7. Proximity Scanning Transmission Electron Microscopy/Spectroscopy

    CERN Document Server

    Hwang, Ing-Shouh

    2016-01-01

    Here a new microscopic method is proposed to image and characterize very thin samples like few-layer materials, organic molecules, and nanostructures with nanometer or sub-nanometer resolution using electron beams of energies lower than 20 eV. The microscopic technique achieves high resolution through the proximity (or near-field) effect, as in scanning tunneling microscopy (STM), while it also allows detection of transmitted electrons for imaging and spectroscopy, as in scanning transmission electron microscopy (STEM). This proximity transmission electron microscopy (PSTEM) does not require any lens to focus the electron beam. It also allows detailed characterization of the interaction of low-energy electron with materials. PSTEM can operate in a way very similar to scanning tunneling microscopy, which provides high-resolution imaging of geometric and electronic structures of the sample surface. In addition, it allows imaging and characterization of the interior structures of the sample based on the detected...

  8. Rotary-scanning optical resolution photoacoustic microscopy

    Science.gov (United States)

    Qi, Weizhi; Xi, Lei

    2016-10-01

    Optical resolution photoacoustic microscopy (ORPAM) is currently one of the fastest evolving photoacoustic imaging modalities. It has a comparable spatial resolution to pure optical microscopic techniques such as epifluorescence microscopy, confocal microscopy, and two-photon microscopy, but also owns a deeper penetration depth. In this paper, we report a rotary-scanning (RS)-ORPAM that utilizes a galvanometer scanner integrated with objective to achieve rotary laser scanning. A 15 MHz cylindrically focused ultrasonic transducer is mounted onto a motorized rotation stage to follow optical scanning traces synchronously. To minimize the loss of signal to noise ratio, the acoustic focus is precisely adjusted to reach confocal with optical focus. Black tapes and carbon fibers are firstly imaged to evaluate the performance of the system, and then in vivo imaging of vasculature networks inside the ears and brains of mice is demonstrated using this system.

  9. Scanning microfluorometry in intravital microvascular research.

    Science.gov (United States)

    Witte, S

    1989-01-01

    Our own development of fluorometric scanning techniques in intravital microscopy of the microcirculation is described. Very tiny amount of fluorometric substances are detected with a high temporal and locational resolution. The everted small intestinal mesentery of the rat serves as a model. We have given a detailed description of the microscopes used, the optical systems, the conditions of measurement of the microfluorometry, the scanning techniques and the evaluation of the measurement data. The present state of technical development detects 10(-12) g of a fluorochromed plasma protein in 8 ms in a measurement field of 2 microns 2. The four-digit measurement data of a scanning line of 200 microns length in 0.25 micron locational resolution are registered in about 2 s.

  10. Human performance in radiological survey scanning

    Energy Technology Data Exchange (ETDEWEB)

    Brown, W.S. [Brookhaven National Lab., Upton, NY (United States); Abelquist, E.W. [Oak Ridge Inst. for Science and Education, TN (United States)

    1998-03-01

    The probability of detecting residual contamination in the field using portable radiological survey instruments depends not only on the sensitivity of the instrumentation used in scanning, but also on the surveyor`s performance. This report provides a basis for taking human performance into account in determining the minimum level of activity detectable by scanning. A theoretical framework was developed (based on signal detection theory) which allows influences on surveyors to be anticipated and understood, and supports a quantitative assessment of performance. The performance of surveyors under controlled yet realistic field conditions was examined to gain insight into the task and to develop means of quantifying performance. Then, their performance was assessed under laboratory conditions to quantify more precisely their ability to make the required discriminations. The information was used to characterize surveyors` performance in the scanning task and to provide a basis for predicting levels of radioactivity that are likely to be detectable under various conditions by surveyors using portable survey instruments.

  11. Variants and pitfalls on radioiodine scans in pediatric patients with differentiated thyroid carcinoma

    Energy Technology Data Exchange (ETDEWEB)

    Mostafa, Mohamed; Vali, Reza; Chan, Jeffrey; Omarkhail, Yusuaf; Shammas, Amer [University of Toronto, Nuclear Medicine Division, Department of Medical Imaging, The Hospital for Sick Children, Toronto, Ontario (Canada)

    2016-10-15

    Potentially false-positive findings on radioiodine scans in children with differentiated thyroid carcinoma can mimic functioning thyroid tissue and functioning thyroid carcinomatous tissue. Such false-positive findings comprise variants and pitfalls that can vary slightly in children as compared with adults. To determine the patterns and frequency of these potential false-positive findings on radioiodine scans in children with differentiated thyroid carcinoma. We reviewed a total of 223 radioiodine scans from 53 pediatric patients (mean age 13.3 years, 37 girls) with differentiated thyroid carcinoma. Focal or regional activity that likely did not represent functioning thyroid tissue or functioning thyroid carcinomatous tissue were categorized as variants or pitfalls. The final diagnosis was confirmed by reviewing the concurrent and follow-up clinical data, correlative ultrasonography, CT scanning, serum thyroglobulin and antithyroglobulin antibody levels. We calculated the frequency of these variants and pitfalls from diagnostic and post-therapy radioiodine scans. The most common variant on the radioiodine scans was the thymic activity (24/223, 10.8%) followed by the cardiac activity (8/223, 3.6%). Salivary contamination and star artifact, caused by prominent thyroid remnant, were the most important observed pitfalls. Variants and pitfalls that mimic functioning thyroid tissue or functioning thyroid carcinomatous tissue on radioiodine scan in children with differentiated thyroid carcinoma are not infrequent, but they decrease in frequency on successive radioiodine scans. Potential false-positive findings can be minimized with proper knowledge of the common variants and pitfalls in children and correlation with clinical, laboratory and imaging data. (orig.)

  12. Automatic segmentation and quantification of the cardiac structures from non-contrast-enhanced cardiac CT scans

    Science.gov (United States)

    Shahzad, Rahil; Bos, Daniel; Budde, Ricardo P. J.; Pellikaan, Karlijn; Niessen, Wiro J.; van der Lugt, Aad; van Walsum, Theo

    2017-05-01

    Early structural changes to the heart, including the chambers and the coronary arteries, provide important information on pre-clinical heart disease like cardiac failure. Currently, contrast-enhanced cardiac computed tomography angiography (CCTA) is the preferred modality for the visualization of the cardiac chambers and the coronaries. In clinical practice not every patient undergoes a CCTA scan; many patients receive only a non-contrast-enhanced calcium scoring CT scan (CTCS), which has less radiation dose and does not require the administration of contrast agent. Quantifying cardiac structures in such images is challenging, as they lack the contrast present in CCTA scans. Such quantification would however be relevant, as it enables population based studies with only a CTCS scan. The purpose of this work is therefore to investigate the feasibility of automatic segmentation and quantification of cardiac structures viz whole heart, left atrium, left ventricle, right atrium, right ventricle and aortic root from CTCS scans. A fully automatic multi-atlas-based segmentation approach is used to segment the cardiac structures. Results show that the segmentation overlap between the automatic method and that of the reference standard have a Dice similarity coefficient of 0.91 on average for the cardiac chambers. The mean surface-to-surface distance error over all the cardiac structures is 1.4+/- 1.7 mm. The automatically obtained cardiac chamber volumes using the CTCS scans have an excellent correlation when compared to the volumes in corresponding CCTA scans, a Pearson correlation coefficient (R) of 0.95 is obtained. Our fully automatic method enables large-scale assessment of cardiac structures on non-contrast-enhanced CT scans.

  13. Power Management during Scan Based Sequential Circuit Testing

    CERN Document Server

    p, Reshma

    2011-01-01

    This paper shows that not every scan cell contributes equally to the power consumption during scan based test. The transitions at some scan cells cause more toggles at the internal signal lines of a circuit than the transitions at other scan cells. Hence the transitions at these scan cells have a larger impact on the power consumption during test application. These scan cells are called power sensitive scan cells.A verilog based approach is proposed to identify a set of power sensitive scan cells. Additional hardware is added to freeze the outputs of power sensitive scan cells during scan shifting in order to reduce the shift power consumption.when multiple scan chain is incorporated along with freezing the power sensitive scan cell,over all power during testing can be reduced to a larger extend.

  14. Tree Height Growth Measurement with Single-Scan Airborne, Static Terrestrial and Mobile Laser Scanning

    Directory of Open Access Journals (Sweden)

    Yi Lin

    2012-09-01

    Full Text Available This study explores the feasibility of applying single-scan airborne, static terrestrial and mobile laser scanning for improving the accuracy of tree height growth measurement. Specifically, compared to the traditional works on forest growth inventory with airborne laser scanning, two issues are regarded: “Can the new technique characterize the height growth for each individual tree?” and “Can this technique refine the minimum growth-discernable temporal interval further?” To solve these two puzzles, the sampling principles of the three laser scanning modes were first examined, and their error sources against the task of tree-top capturing were also analyzed. Next, the three-year growths of 58 Nordic maple trees (Crimson King for test were intermittently surveyed with one type of laser scanning each time and then analyzed by statistics. The evaluations show that the height growth of each individual tree still cannot be reliably characterized even by single-scan terrestrial laser scanning, and statistical analysis is necessary in this scenario. After Gaussian regression, it is found that the minimum temporal interval with distinguishable tree height growths can be refined into one month based on terrestrial laser scanning, far better than the two years deduced in the previous works based on airborne laser scanning. The associated mean growth was detected to be about 0.12 m. Moreover, the parameter of tree height generally under-estimated by airborne and even mobile laser scanning can be relatively revised by means of introducing static terrestrial laser scanning data. Overall, the effectiveness of the proposed technique is primarily validated.

  15. Is complete umbilical cord scanning possible at the second-trimester ultrasound scan?

    Science.gov (United States)

    Ugurlucan, Funda Gungor; Yuksel, Atil

    2014-10-01

    To evaluate the feasibility of umbilical cord scanning during the second-trimester sonographic examination, we looked at the method of scanning, the findings, and the time spent. Five hundred forty-nine singleton pregnancies were evaluated at 18-23 weeks' menstrual age with two-dimensional sonography (US). Color Doppler US was used when needed. The umbilical cord was traced from the fetal insertion site to the placental insertion site. Fetal and placental sites of insertion; number of vessels; presence of knots, cysts, tumors, nuchal cords, or placental anomalies; time spent for scanning; and the use of color Doppler US were noted. The mean maternal age was 33.1 ± 4.1 years, and the mean menstrual age of the fetuses during scanning was 20.4 ± 2.4 weeks. The mean time spent for umbilical cord scanning was 41.5 ± 46.7 seconds. In one case (0.2%), the umbilical cord could not be scanned completely. Color Doppler US was needed in 125 (22.8%) of the scans. Scan results were positive in 153 (27.9%) cases. We observed six cases (1.1%) of a single umbilical artery, two (0.4%) umbilical cord knots, one (0.2%) umbilical cord hernia, and 104 (18.9%) nuchal cords. We also documented 27 (5.0%) marginal insertions, four placenta previa totalis (0.7%), four placenta previa marginalis (0.7%), and eight velamentous insertions (1.5%). Umbilical cord US scanning is feasible during the second trimester of pregnancy, and complete scanning can be performed in the majority of the cases. Color Doppler analysis may aid scanning when needed. © 2014 Wiley Periodicals, Inc. J Clin Ultrasound, 2014. Copyright © 2014 Wiley Periodicals, Inc.

  16. A Scanning Microwave Radar and Radiometer

    DEFF Research Database (Denmark)

    Skou, Niels

    1995-01-01

    The Scanning Microwave Radar and Radiometer (SMRR) is a line scanner featuring a combined radar and radiometer system operating around 35 and 94 GHz. The layout of the SMRR is shown. The 2 offset antenna parabolas scan in synchronism, the receiver antenna has the highest gain in order to ensure...... that footprints are identical for the radar and the radiometer. The instrument will be flown in a pod under a Gulfstream G3 normally cruising with 240 m/sec at 12500 m, and will thus be able to sense clouds and precipitation from above...

  17. Gallium-67 citrate scan in extrapulmonary tuberculosis

    Energy Technology Data Exchange (ETDEWEB)

    Lin Wanyu [Taichung Veterans General Hospital (Taiwan). Dept. of Nuclear Medicine; Hsieh Jihfang [Chi-Mei Foundation Hospital, Tainan (Taiwan)

    1999-07-01

    Aim: Whole-body gallium scan was performed to evaluate the usefulness of gallium scan for detecting extrapulmonary tuberculosis (TB) lesions. Methods: Thirty-seven patients with extrapulmonary TB were included in this study. Four patients were found to have two lesions. Totally, 41 lesions were identified, including 19 TB arthritis, 8 spinal TB, 5 TB meningitis, 3 TB lymphadenopathy, 2 TB pericarditis, 1 TB peritonitis, 1 intestinal TB, 1 skin TB and 1 renal TB. Results: Of the 41 extrapulmonary TB lesions, gallium scan detected 32 lesions with a sensitivity of 78%. All the patients with TB meningitis showed negative gallium scan. When the five cases of TB meningitis were excluded, the detection sensitivity of gallium scan increased to 88.9% (32/36). Conclusion: Our data revealed that gallium scan is a convenient and useful method for evaluating extrapulmonary TB lesions other than TB-meningitis. We suggest that gallium scan be included in the clinical routine for patients with suspected extrapulmonary TB. (orig.) [German] Ziel: Es wurden Ganzkoerper-Gallium-Szintigramme angefertigt, um den Nutzen der Gallium-Szintigraphie zur Erfassung von extrapulmonalen Tuberkuloseherden (TB) zu erfassen. Methoden: 37 Patienten mit extrapulmonaler TB wurden eingeschlossen. 4 Patienten hatten 2 Laesionen. Insgesamt wurden 41 Laesionen identifiziert, hierunter 19 TB-Arthritis, 8 spinale TB, 5 TB-Meningitis, 3 TB-Lymphadenopathie, 2 TB-Perikarditis, 1 TB-Peritonitis, 1 intestinale TB, 1 Haut-TB und eine Nieren-TB. Ergebnisse: Von den 41 extrapulmonalen TB-Herden erfasste die Gallium-Szintigraphie 32 Herde mit einer Sensitivitaet von 78%. Alle Patienten mit TB-Meningitis zeigten einen negativen Gallium-Scan. Wenn die 5 Faelle mit TB-Meningitis ausgeschlossen wurden, stieg die Sensitivititaet der Gallium-Szintigraphie auf 88,9% (32/36). Schlussfolgerung: Die Daten zeigen, dass die Gallium-Szintigraphie eine einfache und nuetzliche Methode zur Erfassung extrapulmonaler TB-Herde ist

  18. Tip-modulation scanned gate microscopy.

    Science.gov (United States)

    Wilson, Neil R; Cobden, David H

    2008-08-01

    We introduce a technique that improves the sensitivity and resolution and eliminates the nonlocal background of scanned gate microscopy (SGM). In conventional SGM, a voltage bias is applied to the atomic force microscope tip and the sample conductance is measured as the tip is scanned. In the new technique, which we call tip-modulation SGM (tmSGM), the biased tip is oscillated and the induced oscillation of the sample conductance is measured. Applied to single-walled carbon nanotube network devices, tmSGM gives sharp, low-noise and background-free images.

  19. Speckle Scanning Based X-ray Imaging

    CERN Document Server

    Berujon, Sebastien

    2015-01-01

    The X-ray near field speckle scanning concept is an approach recently introduced to obtain absorption, phase and darkfield images of a sample. In this paper, we demonstrate ways of recovering from a sample its ultra-small angle X-ray scattering distribution using numerical deconvolution, and the 2D phase gradient signal from random step scans, the latter being used to elude the flat field correction error. Each feature is explained theoretically and demonstrated experimentally at a synchrotron X-ray facility.

  20. Thyroiditis: Radioisotope Scan Findings and Clinical Significance

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jong Chae; Han, Duck Sup; Park, Jung Suck; Kim, Se Jong; Park, Byung Lan; Kim, Byoung Geun [Kwangju Christian Hospital, Kwangju (Korea, Republic of)

    1991-07-15

    We analyzed Radioisotope scan findings of 46 patients of thyroiditis which were proven pathologically at K.C.H. The results were as follows 1) 45 patients were female, one was male and average age of patients was 37 years old. 2) The lesion site was predominant in both lobe (67%) Hashimoto's thyroiditis showed enlarged thyroid (85%) with cold nodule (20%), diffuse decreased activity (10%), while subacute thyroiditis was presented absent activity (53%), poor visualization (20%) or cold nodule (7%). 4) Radioisotope scan was valuable in evaluating function of thyroid gland and detection of lesion but there was a limit of pathological nature.

  1. DentaScan in oral imaging

    Energy Technology Data Exchange (ETDEWEB)

    Au-Yeung, K.M.; Ahuja, A.T.; Ching, A.S.C.; Metreweli, C

    2001-09-01

    In the past, dental disease and lesions involving the jaw were either evaluated by plain radiography or tomography. The advent of spiral computed tomography (CT) and DentaScan is changing the imaging trend. It is now not only used for pre-implant assessment but also in the diagnosis of lesions affecting the jaw. This pictorial review discusses the role of DentaScan in the various abnormalities that may affect the mandible and maxilla. Au-Yeung, K.M. et al. (2001)

  2. The near-field scanning thermal microscope

    Science.gov (United States)

    Wischnath, Uli F.; Welker, Joachim; Munzel, Marco; Kittel, Achim

    2008-07-01

    We report on the design, characterization, and performance of a near-field scanning thermal microscope capable to detect thermal heat currents mediated by evanescent thermal electromagnetic fields close to the surface of a sample. The instrument operates in ultrahigh vacuum and retains its scanning tunneling microscope functionality, so that its miniature, micropipette-based thermocouple sensor can be positioned with high accuracy. Heat currents on the order of 10-7W are registered in z spectroscopy at distances from the sample ranging from 1 to about 30nm. In addition, the device provides detailed thermographic images of a sample's surface.

  3. The Scanning Theremin Microscope: A Model Scanning Probe Instrument for Hands-On Activities

    Science.gov (United States)

    Quardokus, Rebecca C.; Wasio, Natalie A.; Kandel, S. Alex

    2014-01-01

    A model scanning probe microscope, designed using similar principles of operation to research instruments, is described. Proximity sensing is done using a capacitance probe, and a mechanical linkage is used to scan this probe across surfaces. The signal is transduced as an audio tone using a heterodyne detection circuit analogous to that used in…

  4. 47 CFR 15.121 - Scanning receivers and frequency converters used with scanning receivers.

    Science.gov (United States)

    2010-10-01

    ... receivers and frequency converters designed or marketed for use with scanning receivers, shall: (1) Be...; replacing a plug-in semiconductor chip; or programming a semiconductor chip using special access codes or an external device, such as a personal computer. Scanning receivers, and frequency converters designed for...

  5. The Scanning Theremin Microscope: A Model Scanning Probe Instrument for Hands-On Activities

    Science.gov (United States)

    Quardokus, Rebecca C.; Wasio, Natalie A.; Kandel, S. Alex

    2014-01-01

    A model scanning probe microscope, designed using similar principles of operation to research instruments, is described. Proximity sensing is done using a capacitance probe, and a mechanical linkage is used to scan this probe across surfaces. The signal is transduced as an audio tone using a heterodyne detection circuit analogous to that used in…

  6. Scan posture definition and hip girth measurement: the impact on clothing design and body scanning.

    Science.gov (United States)

    Gill, Simeon; Parker, Christopher J

    2016-11-15

    Ergonomic measurement is central to product design and development; especially for body worn products and clothing. However, there is a large variation in measurement definitions, complicated by new body scanning technology that captures measurements in a posture different to traditional manual methods. Investigations of hip measurement definitions in current clothing measurement practices supports analysis of the effect of scan posture and hip measurement definition on the circumferences of the hip. Here, the hip girth is a key clothing measurement that is not defined in current body scanning measurement standards. Sixty-four participants were scanned in the standard scan posture of a [TC](2) body scanner, and also in a natural posture similar to that of traditional manual measurement collection. Results indicate that scan posture affects hip girth circumferences, and that some current clothing measurement practices may not define the largest lower body circumference. Recommendations are made concerning how the hip is defined in measurement practice and within body scanning for clothing product development. Practitioner Summary: The hip girth is an important measurement in garment design, yet its measurement protocol is not currently defined. We demonstrate that body posture during body scanning affects hip circumferences, and that current clothing measurement practices may not define the largest lower body circumference. This paper also provides future measurement practice recommendations.

  7. CT scan of the hypopharynx and larynx. Value of phonation scans

    Energy Technology Data Exchange (ETDEWEB)

    Fujii, Naoko; Anno, Hirofumi; Takahashi, Masaki; Koga, Sukehiko; Mori, Shigeki; Iwata, Shigenobu; Ikuta, Katsumi; Mashita, Shinichi.

    1988-08-01

    29 patients with hypopharyngeal or laryngeal disorders were sustained phonation of vowel /E/ at their comfortable pitch and intensity levels on their CT scans. These images were compared with CT scans during quiet breathing or breath holding. The pyriform sinuses and the aryepiglottic folds were better visualized and the details of the glottis and the laryngeal ventricles were demonstrable during phonation.

  8. High-speed Lissajous-scan atomic force microscopy: scan pattern planning and control design issues.

    Science.gov (United States)

    Bazaei, A; Yong, Yuen K; Moheimani, S O Reza

    2012-06-01

    Tracking of triangular or sawtooth waveforms is a major difficulty for achieving high-speed operation in many scanning applications such as scanning probe microscopy. Such non-smooth waveforms contain high order harmonics of the scan frequency that can excite mechanical resonant modes of the positioning system, limiting the scan range and bandwidth. Hence, fast raster scanning often leads to image distortion. This paper proposes analysis and design methodologies for a nonlinear and smooth closed curve, known as Lissajous pattern, which allows much faster operations compared to the ordinary scan patterns. A simple closed-form measure is formulated for the image resolution of the Lissajous pattern. This enables us to systematically determine the scan parameters. Using internal model controllers (IMC), this non-raster scan method is implemented on a commercial atomic force microscope driven by a low resonance frequency positioning stage. To reduce the tracking errors due to actuator nonlinearities, higher order harmonic oscillators are included in the IMC controllers. This results in significant improvement compared to the traditional IMC method. It is shown that the proposed IMC controller achieves much better tracking performances compared to integral controllers when the noise rejection performances is a concern.

  9. A Successive Scans Method of Adjusting Scan-Time for Injection Electroluminescent Display Panels

    Institute of Scientific and Technical Information of China (English)

    OU Peng; YANG Gang; JIANG Quan; WANG Jun; HU Jian-Hua; WU Qi-Peng; LUO Kai-Jun

    2011-01-01

    @@ Aiming at the problem of luminance uniformity for injection electroluminescent display panels, we present a new scan method for display panels according to successive scans theory.First, on the basis of the number of pixels requiring light emitting in one frame period, we adjust the scan time for each row.Secondly, for ensuring image transmission synchronization, the frame period must to be a constant.We adopt a 64 × 32 LED display panel as an example to expound the new scan method and we obtain the good result that the reduce amplitude of luminance non-uniformity is 31.34% and the increase amplitude of the average luminance value is 7.8258%.%Aiming at the problem of luminance uniformity for injection electroluminescent display panels,we present a new scan method for display panets according to successive scans theory.First,on the basis of the number of pixels requiring light emitting in one frame period,we adjust the scan time for each row.Secondly,for ensuring image transmission synchronization,the frame period must to be a constant.We adopt a 64×32 LED display panel as an example to expound the new scan method and we odtain the good result that the reduce amplitude of luminance non-uniformity is 31.34% and the increase amplitude of the average luminance value is 7.8258%.

  10. CT diagnosis of retinoblastoma with histopathologic correlations

    Energy Technology Data Exchange (ETDEWEB)

    Olivecrona, H. [Dept. of Radiology, King Khaled Eye Specialist Hospital, Riyadh (Saudi Arabia); Agerberg, P.A. [Dept. of Radiology, King Khaled Eye Specialist Hospital, Riyadh (Saudi Arabia); Huaman, A. [Dept. of Pathology, King Khaled Eye Specialist Hospital, Riyadh (Saudi Arabia)

    1994-08-01

    The authors correlated the radiologic and histopathologic characteristics of 108 retinoblastomas in 98 patients. Calcifications were demonstrable by CT scans in 92.6% of the cases, whereas only 82% were evident upon routine histologic study. Cases of severe invasion of the optic nerve beyond the lamina cribrosa and up to the surgical margin of the nerve were detected by CT scans. Lesser degrees of invasion could not be determined by the same method. Orbital extension was also demonstrable, whereas invasion limited to the sclera was rarely accessible to CT diagnosis. Choroidal invasion was not detectable. Computerized tomography detected enlargement of the ipsilateral lacrimal gland in 17.5% of patients. This phenomenon correlates with invasion of the choroid and the optic nerve. (orig.)

  11. Changes in cortical activity when subjects scan memory for tones.

    Science.gov (United States)

    Kaufman, L; Curtis, S; Wang, J Z; Williamson, S J

    1992-04-01

    The magnetoencephalogram (MEG) was used to detect regional changes in spontaneous cortical activity accompanying short-term memory search. This method was chosen because magnetic fields are detectable only within a few centimeters of the projections of their sources onto the scalp. The specific hypothesis that auditory cortex is involved in scanning memory for tones was tested by sensing the field of the magnetic counterpart to N100 (N100m) which is known to originate in auditory cortex. N100m was measured at many different positions and the spontaneous cortical rhythms in the alpha bandwidth (8-12 Hz) were measured at the same places. These rhythms were found to be suppressed while subjects scanned memory for musical tones in a Sternberg paradigm. For 3 subjects, both the MEG suppression time (ST) and reaction time (RT) increased linearly with memory set size. The correlation between ST measured over the left hemisphere and set size was significant for two subjects but not significant for the third, and the slopes of the regression lines relating ST to set size were too shallow to be related to the time required to scan memory. However, the correlation between ST of the right hemisphere and set size was highly significant for all subjects, and the slopes of the regression lines were comparable to those relating RT to set size. The electroencephalogram (EEG) recorded with midline electrodes failed to reveal a significant relationship between suppression time and set size for 2 of the subjects, thus ruling out global alpha blockage and generalized arousal as the basis for the task-related suppression duration. The electric N100, measured at Cz, decreased significantly in amplitude with set size for 2 subjects, but it increased significantly in amplitude for the third subject. In contrast, RT increased with set size for all subjects. N100m measured over the right hemisphere was similar to the behavior of N100, while N100m measured over the left hemisphere showed

  12. Image Correlation Microscopy for Uniform Illumination

    Science.gov (United States)

    Gaborski, Thomas R.; Sealander, Michael N.; Ehrenberg, Morton; Waugh, Richard E.; McGrath, James L.

    2011-01-01

    Image cross-correlation microscopy (ICM) is a technique that quantifies the motion of fluorescent features in an image by measuring the temporal autocorrelation function decay in a time-lapse image sequence. ICM has traditionally employed laser-scanning microscopes because the technique emerged as an extension of laser-based fluorescence correlation spectroscopy (FCS). In this work, we show that image correlation can also be used to measure fluorescence dynamics in uniform illumination or wide-field imaging systems and we call our new approach uniform illumination image correlation microscopy (UI-ICM). Wide-field microscopy is not only a simpler, less expensive imaging modality, but it offers the capability of greater temporal resolution over laser-scanning systems. In traditional laser-scanning ICM, lateral mobility is calculated from the temporal de-correlation of an image, where the characteristic length is the illuminating laser beam width. In wide-field microscopy, the diffusion length is defined by the feature size using the spatial autocorrelation function (SACF). Correlation function decay in time occurs as an object diffuses from its original position. We show that theoretical and simulated comparisons between Gaussian and uniform features indicate the temporal autocorrelation function (TACF) depends strongly on particle size and not particle shape. In this report, we establish the relationships between the SACF feature size, TACF characteristic time and the diffusion coefficient for UI-ICM using analytical, Monte-Carlo and experimental validation with particle tracking algorithms. Additionally, we demonstrate UI-ICM analysis of adhesion molecule domain aggregation and diffusion on the surface of human neutrophils. PMID:20055917

  13. Comparison of SUV and Patlak slope for monitoring of cancer therapy using serial PET scans

    Energy Technology Data Exchange (ETDEWEB)

    Freedman, Nanette M.T. [Hadassah University Hospital, Jerusalem (Israel); Sundaram, Senthil K.; Kurdziel, Karen; Carrasquillo, Jorge A.; Whatley, Millie; Carson, Joann M.; Sellers, David; Libutti, Steven K.; Yang, James C.; Bacharach, Stephen L. [National Institutes of Health, Bethesda, MD (United States)

    2003-01-01

    The standardized uptake value (SUV) and the slope of the Patlak plot (K) have both been proposed as indices to monitor the progress of disease during cancer therapy. Although a good correlation has been reported between SUV and K, they are not equivalent, and may not be equally affected by metabolic changes occurring during disease progression or therapy. We wished to compare changes in tumor SUV with changes in K during serial positron emission tomography (PET) scans for monitoring therapy. Thirteen patients enrolled in a protocol to treat renal cell carcinoma metastases were studied. Serial dynamic fluorodeoxyglucose (FDG) PET scans and computed tomography (CT) and magnetic resonance (MR) scans were performed once prior to treatment, once at 36{+-}2 days after the start of treatment, and (in 7/13 subjects, 16/27 lesions) a third time at 92{+-}9 days after the start of treatment. This resulted in a total of 33 scans, and 70 tumor Patlak and SUV values (one value for each lesion at each time point). SUV and K were measured over one to four predefined tumors/patient at each time point. The input function was obtained from regions of interest over the heart, combined, if necessary, with late blood samples. Over all tumors and scans, SUV and K correlated well (r=0.97, P<0.0001). However, change in SUV with treatment over all tumor scan pairs was much less well correlated with the corresponding change in K (r=0.73, P<0.0001). The absolute difference in % change was outside the 95% confidence limits expected from previous variability studies in 6 of 43 pairs of tumor scans, and greater than 50% in 2 of 43 tumor scan pairs. In four of the six cases, the two indices predicted opposing therapeutic outcomes. Similar results were obtained for SUV normalized by body weight or body surface area and for SUVs using mean or maximum count. Changes in CT and MR tumor cross-product dimensions correlated poorly with each other (r=0.47, P=NS), and so could not be used to determine the

  14. 196 Beams in a Scanning Electron Microscope

    NARCIS (Netherlands)

    Mohammadi-Gheidari, A.

    2013-01-01

    In this thesis, for the first time ever, it is demonstrated that 196 beams out of a single electron source can be finely focused onto the sample using the electron optics of a standard single beam SEM. During this PhD thesis, a multi beam scanning electron (MBSEM) was designed and built. The thesis

  15. Digital weight watching: reconstruction of scanned documents

    NARCIS (Netherlands)

    T. Gielissen; M. Marx

    2009-01-01

    Scanned and OCRed data leads to large file sizes if facsimile images are included. This makes storage of, and providing online access to large data sets costly. Manually analyzing such data is cumbersome because of long download and processing times. It may thus be advantageous to reconstruct the sc

  16. Fiber coupled ultrafast scanning tunneling microscope

    DEFF Research Database (Denmark)

    Keil, Ulrich Dieter Felix; Jensen, Jacob Riis; Hvam, Jørn Märcher

    1997-01-01

    We report on a scanning tunneling microscope with a photoconductive gate in the tunneling current circuit. The tunneling tip is attached to a coplanar transmission line with an integrated photoconductive switch. The switch is illuminated through a fiber which is rigidly attached to the switch...

  17. Hemianopic visual field defects elicit hemianopic scanning

    NARCIS (Netherlands)

    Tant, M.L.M.; Cornelissen, F. W.; Kooijman, A.C.; Brouwer, W.H.

    2002-01-01

    Previous explanations for the variability in success of compensating for homonymous hemianopia (HH) has been in terms of extent of the brain injury. In using on-line eye movement registrations, we simulated HH in 16 healthy subjects and compared their scanning performance on a dot counting task to t

  18. Semiconductor Surface Characterization by Scanning Probe Microscopies

    Science.gov (United States)

    2001-01-01

    potentiometry (STP)8 and ballistic electron emission microscopy (BEEM)9 which allow mapping of lateral surface potential and local subsurface Schottky...A.P.Fein. "Tunneling Spectroscopy of the Si(1 1 1)2xl Surface", Surf.Sci. 181, 295- 306, 1987. 8. P.Muralt, D.W.Pohl, "Scanning tunneling potentiometry

  19. Trend scanning, scouting and foresight techniques

    DEFF Research Database (Denmark)

    Rohrbeck, René

    2013-01-01

    of an appropriate foresight method as well as the successful use of foresight methods in the highly iterative front end of innovation. Monitoring and scanning are two ways of conducting the search, with intelligent data mining and scouting networks as possible approaches. Foresight methods can be divided...

  20. SCANNING TUNNELING MICROSCOPY STUDIES ON OPTICAL DISC

    Institute of Scientific and Technical Information of China (English)

    徐磊; 顾冬红; 等

    1994-01-01

    Scanning tunneling microscope(STM) is used to investigate the optical dise.The areas with and without data stampers are all observedcarefully.Three-dimensional images of the disc surface clearly demonstrate the period.depth of the grooves and the shape of data stampers.Some phenomena of STM imaging are also discussed.

  1. Getting a CAT Scan (For Kids)

    Medline Plus

    Full Text Available ... More Quizzes Kids' Dictionary of Medical Words En Español What Other Kids Are Reading What to Do ... CAT Scan (Video) Print A A A en español Obtención de una tomografía computada (video) CAT stands ...

  2. Getting a CAT Scan (For Kids)

    Medline Plus

    Full Text Available ... inside your body. The scan itself is painless. All you'll need to do is hold still ... of Nondiscrimination Visit the Nemours Web site. Note: All information on KidsHealth® is for educational purposes only. ...

  3. Internet access to scanned paper documents

    NARCIS (Netherlands)

    Worring, M.; Smeulders, A.W.M.; Witten, I.; Akscyn, R.; Shipman, F.M.

    1998-01-01

    In this contribution we identify the different structures to encounterin a hyperdocument. Methods are described for deriving those structures from scanned paper originals. The content and structure of the document is then made available in a form suited for an Internet browser. It provides convenien

  4. Environmental Scanning: Assessing Local Business Training Needs.

    Science.gov (United States)

    Clagett, Craig A.; Huntington, Robin B.

    Environmental scanning (ES) is a formal process of assessing trends and forecasting events which can influence an institution so that the potential challenges and opportunities can be effectively anticipated during strategic planning activities. The goal of ES is the implementation of proactive, anticipatory policies that will be robust under a…

  5. Autofocus method for scanning remote sensing cameras.

    Science.gov (United States)

    Lv, Hengyi; Han, Chengshan; Xue, Xucheng; Hu, Changhong; Yao, Cheng

    2015-07-10

    Autofocus methods are conventionally based on capturing the same scene from a series of positions of the focal plane. As a result, it has been difficult to apply this technique to scanning remote sensing cameras where the scenes change continuously. In order to realize autofocus in scanning remote sensing cameras, a novel autofocus method is investigated in this paper. Instead of introducing additional mechanisms or optics, the overlapped pixels of the adjacent CCD sensors on the focal plane are employed. Two images, corresponding to the same scene on the ground, can be captured at different times. Further, one step of focusing is done during the time interval, so that the two images can be obtained at different focal plane positions. Subsequently, the direction of the next step of focusing is calculated based on the two images. The analysis shows that the method investigated operates without restriction of the time consumption of the algorithm and realizes a total projection for general focus measures and algorithms from digital still cameras to scanning remote sensing cameras. The experiment results show that the proposed method is applicable to the entire focus measure family, and the error ratio is, on average, no more than 0.2% and drops to 0% by reliability improvement, which is lower than that of prevalent approaches (12%). The proposed method is demonstrated to be effective and has potential in other scanning imaging applications.

  6. Conically scanning lidar error in complex terrain

    DEFF Research Database (Denmark)

    Bingöl, Ferhat; Mann, Jakob; Foussekis, Dimitri

    2009-01-01

    Conically scanning lidars assume the flow to be homogeneous in order to deduce the horizontal wind speed. However, in mountainous or complex terrain this assumption is not valid implying a risk that the lidar will derive an erroneous wind speed. The magnitude of this error ismeasured by collocating...

  7. Vertically aligned nanostructure scanning probe microscope tips

    Science.gov (United States)

    Guillorn, Michael A.; Ilic, Bojan; Melechko, Anatoli V.; Merkulov, Vladimir I.; Lowndes, Douglas H.; Simpson, Michael L.

    2006-12-19

    Methods and apparatus are described for cantilever structures that include a vertically aligned nanostructure, especially vertically aligned carbon nanofiber scanning probe microscope tips. An apparatus includes a cantilever structure including a substrate including a cantilever body, that optionally includes a doped layer, and a vertically aligned nanostructure coupled to the cantilever body.

  8. SCANNING KELVIN PROBE APPLIED TO LOCALISED ...

    African Journals Online (AJOL)

    2015-01-15

    Jan 15, 2015 ... galvanised steel; with an introduced defect in the coating and ... The role of large constituent IM particles in corrosion Al-Cu-Mg alloys has been amply ... phase dealloying and Cu plating on IM particles within the cluster, which raises .... (peak in the line scan graph) has the highest value (-0.116 V- red area ...

  9. Active Listening - Information Gap. SCANS Plans Portfolio.

    Science.gov (United States)

    Sample, Barbara

    A classroom activity for teaching vocational English as a Second Language to adults and focusing on development of listening comprehension is described. The exercise is based on the principles for development of workplace skills offered by the Secretary's Commission on Achieving Necessary Skills (SCANS), and addresses specific competencies…

  10. Was magnetic resonance imaging scan contraindicated?

    Science.gov (United States)

    Rafiq, Muhammad Khizar

    2010-01-01

    An intravenous drug abuser with a retained needle posed a management problem at a neurosurgical unit, having declined magnetic resonance imaging (MRI) on safety grounds. However, later, having been assessed by the senior radiologist, she went though the MRI scan safely.

  11. Getting a CAT Scan (For Kids)

    Medline Plus

    Full Text Available ... More Quizzes Kids' Dictionary of Medical Words En Español What Other Kids Are Reading 7 Videos: Kids ... CAT Scan (Video) Print A A A en español Obtención de una tomografía computada (video) CAT stands ...

  12. Projections of scan patterns on human retina

    Science.gov (United States)

    Kelly, D. H.; Crane, H. D.

    1972-01-01

    Fundus camera tracks eye movements by using camera optics with the aid of an inverted system. Camera provides a flying-spot circular scanning light source in the normal film plane and a broadband photodetector in position normally occupied by light source.

  13. Energetic materials research using scanning electron microscopy

    NARCIS (Netherlands)

    Elshout, J.J.M.H. van den; Duvalois, W.; Benedetto, G.L. Di; Bouma, R.H.B.; Heijden, A.E.D.M. van der

    2016-01-01

    A key-technique for the research of energetic materials is scanning electron microscopy. In this paper several examples are given of characterization studies on energetic materials, including a solid composite propellant formulation. Results of the characterization of energetic materials using scann

  14. Multiplatform Mobile Laser Scanning: Usability and Performance

    Directory of Open Access Journals (Sweden)

    Yuwei Chen

    2012-08-01

    Full Text Available Mobile laser scanning is an emerging technology capable of capturing three-dimensional data from surrounding objects. With state-of-the-art sensors, the achieved point clouds capture object details with good accuracy and precision. Many of the applications involve civil engineering in urban areas, as well as traffic and other urban planning, all of which serve to make 3D city modeling probably the fastest growing market segment in this field. This article outlines multiplatform mobile laser scanning solutions such as vehicle- and trolley-operated urban area data acquisition, and boat-mounted equipment for fluvial environments. Moreover, we introduce a novel backpack version of mobile laser scanning equipment for surveying applications in the field of natural sciences where the requirements include precision and mobility in variable terrain conditions. In addition to presenting a technical description of the systems, we discuss the performance of the solutions in the light of various applications in the fields of urban mapping and modeling, fluvial geomorphology, snow-cover characterization, precision agriculture, and in monitoring the effects of climate change on permafrost landforms. The data performance of the mobile laser scanning approach is described by the results of an evaluation of the ROAMER on a permanent MLS test field. Furthermore, an in situ accuracy assessment using a field of spherical 3D targets for the newly-introduced Akhka backpack system is conducted and reported on.

  15. Backscatter nephelometer to calibrate scanning lidar

    Science.gov (United States)

    Cyle E. Wold; Vladmir A. Kovalev; Wei Min Hao

    2008-01-01

    The general concept of an open-path backscatter nephelometer, its design, principles of calibration and the operational use are discussed. The research-grade instrument, which operates at the wavelength 355 nm, will be co-located with a scanning-lidar at measurement sites near wildfires, and used for the lidar calibration. Such a near-end calibration has significant...

  16. On cylindrical near-field scanning techniques

    DEFF Research Database (Denmark)

    Appel-Hansen, Jørgen

    1980-01-01

    The agreement between the coupling equations obtained in the literature by using the reciprocity theorem and the scattering matrix formulation is demonstrated. The field is expanded in cylindrical vector wave functions and the addition theorem for these functions is used. The communication may se...... serve as a tutorial introduction to the cylindrical scanning techniques....

  17. Phased array based ultrasound scanning system development

    Science.gov (United States)

    Sagdiev, R. K.; Denisov, E. S.; Evdokimov, Yu K.; Fazlyyyakhmatov, M. G.; Kashapov, N. F.

    2014-12-01

    Multichannel ultrasound scanning system based on phased arrays development is presented in this paper. Substantiation of system parameters is presented. The description of block diagram and hardware development is presented. The combination of the self-developed receiving and a transmitting units and commercially available FPGA unit and Personal Computer can solve our scientific goals, while providing a relatively low device cost.

  18. CT scan of the brain (image)

    Science.gov (United States)

    ... CAT scan (computed tomography) is a much more sensitive imaging technique than x-ray, allowing high definition not only of the bony structures, but of the soft tissues. Clear images of organs such as the brain, muscles, joint structures, veins ...

  19. Scanning reference electrode techniques in localized corrosion

    Energy Technology Data Exchange (ETDEWEB)

    Isaacs, H.S.; Vyas, B.

    1979-04-01

    The principles, advantages, and implementations of scanning reference electrode techniques are reviewed. Data related to pitting, intergranular corrosion, welds and stress corrosion cracking are presented. The technique locates the position of localized corrosion and can be used to monitor the development of corrosion and changes in the corrosion rate under a wide range of conditions.

  20. Role of bone scanning in neonatal rickets

    Energy Technology Data Exchange (ETDEWEB)

    Saul, P.D.; Lloyd, D.J.; Smith, F.W.

    1983-03-01

    Preterm infants are at increased risk from rickets. Radionuclide bone scanning is a useful aid in suspected cases. It offers advantages over conventional radiology in terms of sensitivity, radiation dose and extent of examination. Unsuspected fractures of clinical or medicolegal significance may be detected. Two cases are described in which the technique confirmed the diagnosis and assisted management.

  1. Electrochemical gating in scanning electrochemical microscopy

    NARCIS (Netherlands)

    Ahonen, P.; Ruiz, V.; Kontturi, K.; Liljeroth, P.; Quinn, B.M.

    2008-01-01

    We demonstrate that scanning electrochemical microscopy (SECM) can be used to determine the conductivity of nanoparticle assemblies as a function of assembly potential. In contrast to conventional electron transport measurements, this method is unique in that electrical connection to the film is not

  2. Phosphogypsum surface characterisation using scanning electron microscopy

    Directory of Open Access Journals (Sweden)

    Rajković Miloš B.

    2003-01-01

    Full Text Available This paper presents the results of application of Scanning Electron Microscopy (SEM to examinations of the samples of natural gypsum and phosphogypsum. Phosphogypsum has a well developed crystalline structure, and appear in two polymorphous forms, of rombic and hexagonal shape crystals. Natural gypsum has a poorly crystalline structure. The differences in crystalline structure influence the chemical behavior of these row materials.

  3. Energetic materials research using scanning electron microscopy

    NARCIS (Netherlands)

    Elshout, J.J.M.H. van den; Duvalois, W.; Benedetto, G.L. Di; Bouma, R.H.B.; Heijden, A.E.D.M. van der

    2016-01-01

    A key-technique for the research of energetic materials is scanning electron microscopy. In this paper several examples are given of characterization studies on energetic materials, including a solid composite propellant formulation. Results of the characterization of energetic materials using

  4. Rapid 2-axis scanning lidar prototype

    Science.gov (United States)

    Hartsell, Daryl; LaRocque, Paul E.; Tripp, Jeffrey

    2016-10-01

    The rapid 2-axis scanning lidar prototype was developed to demonstrate high-precision single-pixel linear-mode lidar performance. The lidar system is a combined integration of components from various commercial products allowing for future customization and performance enhancements. The intent of the prototype scanner is to demonstrate current stateof- the-art high-speed linear scanning technologies. The system consists of two pieces: the sensor head and control unit. The senor head can be installed up to 4 m from the control box and houses the lidar scanning components and a small RGB camera. The control unit houses the power supplies and ranging electronics necessary for operating the electronics housed inside the sensor head. This paper will discuss the benefits of a 2-axis scanning linear-mode lidar system, such as range performance and a userselectable FOV. Other features include real-time processing of 3D image frames consisting of up to 200,000 points per frame.

  5. Diagnosis of pituitary microadenomas by CT scan

    Energy Technology Data Exchange (ETDEWEB)

    Sakoda, K.; Gen, M.; Yonezawa, M.; Ohta, M.; Matsumura, S. (Hiroshima Univ. (Japan). School of Medicine)

    1981-10-01

    The presence of pituitary microadenomas can be established by the detection of minor changes on polytomograms of the sella turcica. However, as this method is a procedure for detecting secondary changes due to adenoma, it is understandable that microadenomas which fail to present secondary changes cannot be picked up. From this point of view, we investigated the possibility detecting changes in the pituitary itself by means of CT. An axial scan of pituitary microadenomas by EMI-1010 showed that some of the PRL secreting adenomas and all of the GH secreting adenomas showed areas of high density, and that some of PRL secreting adenomas and all the ACTH secreting adenomas showed areas of low density at the site of the adenomas. On a coronal scan with GE/X2, the normal pituitary is highly enhanced, and an absorption coefficient of 70 - 80 is demonstrated, but on an axial scan the coefficient becomes 25 - 35 due to the partial-volume effect. On a coronal scan pituitary microadenomas are shown as hypodense-lucent or isodense as a normal pituitary. However, the absorption coefficient of the hypodense-lucent area was 50 - 60; this is not low, but is, rather, a high density. At present, it is our belief that it is most effective to use a coronal angle with a high-resolution scanner in the diagnosis of pituitary microadenomas.

  6. Magnetic and topographic correlations in Co nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Ciria, M. [Departamento de Magnetismo de Solidos, Departmento de Fisica de la Materia Condensada and Instituto de Ciencia de Materiales de Aragon, Universidad de Zaragoza and Consejo Superior de Investigaciones Cientificas, Zaragoza (Spain)]. E-mail: ciria@unizar.es; Arnaudas, J.I. [Departamento de Magnetismo de Solidos, Departmento de Fisica de la Materia Condensada and Instituto de Ciencia de Materiales de Aragon, Universidad de Zaragoza and Consejo Superior de Investigaciones Cientificas, Zaragoza (Spain); Huttel, Y. [Instituto de Microelectronica de Madrid, Centro Nacional de Microelectronica, Consejo Superior de Investigaciones Cientificas, Tres Cantos, Madrid (Spain); Gomez, H. [Instituto de Microelectronica de Madrid, Centro Nacional de Microelectronica, Consejo Superior de Investigaciones Cientificas, Tres Cantos, Madrid (Spain); Cebollada, A. [Instituto de Microelectronica de Madrid, Centro Nacional de Microelectronica, Consejo Superior de Investigaciones Cientificas, Tres Cantos, Madrid (Spain); Armelles, G. [Instituto de Microelectronica de Madrid, Centro Nacional de Microelectronica, Consejo Superior de Investigaciones Cientificas, Tres Cantos, Madrid (Spain)

    2007-09-15

    We present a study of the magnetic domains structure in Co films grown on AlN composed of particles with nominal thicknesses between 3 and 15 nm. The images taken by using a scanning force microscope show that as the film thickness increases the domains have the magnetization vector pointing out of the plane, and that the magnetization in the particle tends to be in a single domain state with the particle boundaries being the main source for domains boundaries. The variation of the magnetic and topographic correlation functions in terms of the particle thickness suggests that the magnetic state is formed by a correlated super-spin glass structure.

  7. Correlative microscopy of detergent granules.

    Science.gov (United States)

    van Dalen, G; Nootenboom, P; Heussen, P C M

    2011-03-01

    The microstructure of detergent products for textile cleaning determines to a large extent the physical properties of these products. Correlative microscopy was used to reveal the microstructure by reconciling images obtained by scanning electron microscopy with energy dispersive X-ray analysis, X-ray microtomography and Fourier transform infrared microscopy. These techniques were applied on the same location of a subsample of a spray-dried detergent base powder embedded in polyacrylate. In this way, the three-dimensional internal and external structure of detergent granules could be investigated from milli to nano scale with detailed spatial information about the components present. This will generate knowledge how to design optimal microstructures for laundry products to obtain product properties demanded by the market. This method is also very useful for other powder systems used in a large variety of industries (e.g. for pharmaceutical, food, ceramic and metal industries).

  8. SPATIAL REPARTITION OF CURRENT FLUCTUATIONS IN A SCANNING TUNNELING MICROSCOPE

    Directory of Open Access Journals (Sweden)

    Jerome Lagoute

    2011-05-01

    Full Text Available Scanning Tunneling Microscopy (STM is a technique where the surface topography of a conducting sample is probed by a scanning metallic tip. The tip-to-surface distance is controlled by monitoring the electronic tunneling current between the two metals. The aim of this work is to extend the temporal range of this instrument by characterising the time fluctuations of this current on different surfaces. The current noise power spectral density is dominated by a characteristic 1/f component, the physical origin of which is not yet clearly identified, despite a number of investigations. A new I-V preamplifier was developed in order to characterise these fluctuations of the tunnelling current and to obtain images of their spatial repartition. It is observed that their intensity is correlated with some topographical features. This information can be used to get insights on the physical phenomena involved that are not accessible by the usual STM set-up, which is limited to low frequencies.

  9. Scanning array radar system for bridge subsurface imaging

    Science.gov (United States)

    Lai, Chieh-Ping; Ren, Yu-Jiun; Yu, Tzu Yang

    2012-04-01

    Early damage detection of bridge has been an important issue for modern civil engineering technique. Existing bridge inspection techniques used by State Department of Transportation (DOT) and County DOT include visual inspection, mechanical sounding, rebound hammer, cover meter, electrical potential measurements, and ultrasonics; other NDE techniques include ground penetrating radar (GPR), radiography, and some experimental types of sensors. Radar technology like GPR has been widely used for the bridge structure detection with a good penetration depth using microwave energy. The system to be presented in this paper is a different type of microwave sensing technology. It is focus on the subsurface detection and trying to find out detail information at subsurface (10 cm) with high resolution radar imaging from a flexible standoff distance. Our radar operating frequency is from 8-12 GHz, which is different from most of the current GPR systems. Scanning array antenna system is designed for adjustable beamwidth, preferable scanning area, and low sidelobe level. From the theoretical analysis and experimental results, it is found that the proposed technique can successfully capture the presence of the near-surface anomaly. This system is part of our Multi- Modal Remote Sensing System (MRSS) and provides good imaging correlations with other MRSS sensors.

  10. Scanning X-ray microscopy of superconductor/ferromagnet bilayers

    Energy Technology Data Exchange (ETDEWEB)

    Stahl, Claudia; Ruoss, Stephen; Weigand, Markus; Schuetz, Gisela [Max Planck Institute for Intelligent Systems, Stuttgart (Germany); Zahn, Patrick; Bayer, Jonas [Max Planck Institute for Intelligent Systems, Stuttgart (Germany); Research Institute for Innovative Surfaces, FINO, Aalen University (Germany); Albrecht, Joachim [Research Institute for Innovative Surfaces, FINO, Aalen University (Germany)

    2016-07-01

    The magnetic flux distribution arising from a high-T{sub c} superconductor is detected and visualized with high spatial resolution using scanning x-ray microscopy (SXM). Therefore, we introduce a sensor layer, namely, an amorphous, soft-magnetic CoFeB cover layer. The magnetic stray fields of the supercurrents lead to a local reorientation of the magnetic moments in the ferromagnet, which is visualized using the large x-ray magnetic circular dichroism (XMCD) effect of the Co and Fe L3-edge. We show that the XMCD contrast in the sensor layer corresponds to the in-plane magnetic flux distribution of the superconductor and can hence be used to image magnetic structures in superconductors with high spatial resolution. Using the total electron yield (TEY) mode the surface structure and the magnetic domains can be imaged simultaneously and can be correlated. The measurements are carried out at our scanning x-ray microscope MAXYMUS at Bessy II, Berlin with the new low temperature setup.

  11. Probing Nanoscale Electronic and Magnetic Interaction with Scanning Tunneling Spectroscopy

    DEFF Research Database (Denmark)

    Bork, Jakob

    This thesis is concerned with fundamental research into electronic and magnetic interaction on the nanoscale. From small metallic and magnetic islands and layers to single atoms. The research revolves around magnetic interaction probed through the spectroscopic capabilities of the scanning....... This is related to research in correlated electron materials such as studies of phase transitions in heavy fermion compounds and magnetic interaction in spintronic research. The capping of cobalt islands on Cu(111) with silver is investigated with STM and photoemission spectroscopy. It is shown that at low...... coverage the silver preferably nucleates on top of the bilayer high cobalt islands compared to directly on the Cu(111) substrate. Furthermore, the silver forms a combination of a reconstruction and a Moire pattern which is investigated with low-energy electron diraction and spectroscopic STM mapping at 6...

  12. Computed tomographic scan of amenorrhea-galactorrhea syndrome

    Energy Technology Data Exchange (ETDEWEB)

    Nemoto, Yutaka; Inoue, Yuichi; Takemoto, Kazumasa; Oda, Atsuo; Yahata, Satoshi (Osaka City Univ. (Japan). Faculty of Medicine)

    1984-05-01

    Thin (2 mm) section CT scans of a pituitary gland of 30 amenorrhea-galactorrhea patients were reviewed. Eleven out of 30 patients were diagnosed as having a pituitary adenoma (tumor group); nine prolactionomas were verified by surgery. Tumor density compared with normal pituitary gland was low in five, low-mixed in three and isodense in four. The upper margin of a prolactinoma was convexed upward in seven, flat in two and concaved downward in two. Pituitary stalk was deviated in two and not visualized in four. Serum prolactine level (PRL) was more than 130 ng/ml in tumor group. There was a positive correlation between the size of a prolactinoma and PRL. Four prolactinomas invaded the cavernous sinus; three of them showed higher PRL than 1,000 ng/ml.

  13. Computed tomographic (CT) scans in cerebral palsy (CP)

    Energy Technology Data Exchange (ETDEWEB)

    Kolawole, T.M.; Patel, P.J. (King Saud Univ., Riyadh (Saudi Arabia). Dept. of Radiology); Mahdi, A.H. (King Saud Univ., Riyadh (Saudi Arabia). Dept. of Paediatrics)

    1989-11-01

    The CT findings in 120 cerebral palsied children are analysed. The 72.5% positive findings are correlated with the clinical types, as well as the aetiological basis for the cerebral palsy. The spastic type, 83.3% of the total number of children, had the highest positive findings. The yield was increased in children with seizures (91.3%) and those in the postnatal group (90%), as well as those with birth trauma and neonatal asphyxia (94%). The findings were those of atrophy in 30.8%, hydrocephalus, in 10%, infarct in 11.6%, porencephaly in 8.3% and others. The atropic changes and their patterns are explained. Treatable lesions, such as tumour, hydrocephalus, subdural haematoma, porencephaly and hygroma were identified in 22.5% of cases. It is concluded that CT scan is definitely efficacious in the management of cerebral palsied children. (orig.).

  14. Implementation of ionoluminescence in the AGLAE scanning external microprobe

    Science.gov (United States)

    Pichon, L.; Calligaro, T.; Gonzalez, V.; Lemasson, Q.; Moignard, B.; Pacheco, C.

    2015-04-01

    The scope of this work is to present the implementation of an IBIL imaging system in the scanning external microprobe of the AGLAE facility so as to correlate luminescence and composition maps provided by PIXE, RBS and PIGE. The challenging integration of the optical spectrometer, due to incompatibility of acquisition timings and data formats with the other IBA channels has motivated the development of a specific acquisition system. This article details the IBIL setup and explains the technical solutions retained for the coupling of IBIL with IBA techniques in order to produce fast and large IBIL-IBA maps. The IBIL maps stored in the same format as the PIXE, RBS and PIGE ones can be visualised and compared using the dedicated AGLAEmap program or the PyMCA processing package. An example of such a coupled mapping on Mesoamerican jade is presented to emphasise the interest of performing simultaneously IBA and IBIL large mappings.

  15. CT scan findings of patients with Rett syndrome

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, Hisaharu; Takanashi, Aiko; Hirayama, Yoshito; Sakuragawa, Norio; Arima, Masataka; Tateno, Akihiko; Koide, Hiroyoshi.

    1989-05-01

    CT findings and clinical features were analyzed in 16 female patients with Rett syndrome, whose ages were between 4 and 20. Fifteen patients had microcrania. Twelve patients were able to stand and run; however, the remaining 4 patients had the only ability to sit. CT revealed an atrophy of the ponse and various degrees of dilatation in the Silvian fissure, frontal sulcus, and space between the cranium and the frontal polar lobe. An atrophy in the frontal lobe, cerebral cortex surrounding the Silvian fissure, and white matter directly below the cortex seemed to have an important role in the occurrence of this syndrome. There was, however, no definitive correlation between the degree of atrophy and both the patient's age and motor function. Serial CT scannings with clinical process are required. (Namekawa, K).

  16. Validation of burst overlapping for ALOS-2 PALSAR-2 ScanSAR-ScanSAR interferometry

    Science.gov (United States)

    Natsuaki, Ryo; Motohka, Takeshi; Ohki, Masato; Watanabe, Manabu; Suzuki, Shinichi

    2016-10-01

    The Phased Array type L-band Synthetic Aperture Radar-2 (PALSAR-2) aboard the Advanced Land Observing Satellite- 2 (ALOS-2, "DAICHI-2") is the latest L-band spaceborne synthetic aperture radar (SAR). PALSAR-2 observes the world mainly with 10 m resolution / 70 km swath Stripmap mode and 25 m resolution / 350 km swath ScanSAR mode. The 3-m resolution Stripmap mode is mainly used upon Japan. 350 km ScanSAR observation could detect large scale deformation e.g., the Mw 7.8 Gorkha, Nepal earthquake and its aftershocks in 2015. ALOS-2 ScanSAR is the first one that supports ScanSAR-ScanSAR interferometry in L-band spaceborne SAR. However, because of the parameter setting error for the orbit estimation, ALOS-2 PALSAR-2 ScanSAR could achieve little number of interferometric pair until the software modification on February 8, 2015. That is, the burst overlap timing required for the interferometric analysis was insufficient and it depends on the observation date. In this paper, we report the investigation results of this case and discuss the current status of the ALOS-2 ScanSAR InSAR. Some archives achieved before February 8, 2015 can be used for interferometric analysis with after Feb. 8. However, most of them have no interferometric pair. We also report that the archives acquired after February 8, have enough burst overlapping.

  17. Bone scanning as a routine examination of patients with mammary carcinoma; a critical consideration. [Preoperative scanning

    Energy Technology Data Exchange (ETDEWEB)

    Heslinga, J.M.; Pauwels, E.K.J.; Zwaveling, A. (Rijksuniversiteit Leiden (Netherlands). Academisch Ziekenhuis)

    1982-06-05

    The usefulness of bone scanning as a routine examination was evaluated in 136 female patients with mammary carcinoma of whom 81 were staged as Columbia A and 55 as Columbia B/C. The preoperative bone scanning was positive in only 4 patients (2.9%). Consequently, bone scanning is no longer performed in the authors clinic for the preoperative detection of skeletal metastases. Bone scanning as a routine examination at 6-month intervals does not appear to be useful for the first 4 years of the follow-up, either. Most of the patients with a positive bone scan displayed other signs of skeletal metastases at the same time, such as ostealgia and a raised serum alkaline phosphatase level. Further increase of the frequency of bone scanning during the follow-up period would increase the costs considerably, almost prohibitively, even apart from the question whether such a measure might indeed significantly influence the patient's prognosis. The authors conclude that bone scanning should only be performed on the basis of the anamnesis, physical and laboratory findings, both prior to operation and during the follow-up period.

  18. Correlation and Entanglement

    Institute of Scientific and Technical Information of China (English)

    Shun-long Luo; You-feng Luo

    2003-01-01

    In quantum mechanics, it is long recognized that there exist correlations between observables which are much stronger than the classical ones. These correlations are usually called entanglement, and cannot be accounted for by classical theory. In this paper, we will study correlations between observables in terms of covariance and the Wigner-Yanase correlation, and compare their merits in characterizing entanglement. We will show that the Wigner-Yanase correlation has some advantages over the conventional covariance.

  19. Monitoring receptor oligomerization by line-scan fluorescence cross-correlation spectroscopy

    NARCIS (Netherlands)

    Hink, M.A.; Postma, M.; Conn, P.M.

    2013-01-01

    Membrane-localized receptor proteins are involved in many signaling cascades, and diffusion and oligomerization are key processes controlling their activity. In order to study these processes in living cells, fluorescence fluctuation spectroscopy techniques have been developed that allow the quantif

  20. General correlation and partial correlation analysis in finding interactions: with Spearman rank correlation and proportion correlation as correlation measures

    OpenAIRE

    WenJun Zhang; Xin Li

    2015-01-01

    Between-taxon interactions can be detected by calculating the sampling data of taxon sample type. In present study, Spearman rank correlation and proportion correlation are chosen as the general correlation measures, and their partial correlations are calculated and compared. The results show that for Spearman rank correlation measure, in all predicted candidate direct interactions by partial correlation, about 16.77% (x, 0-45.4%) of them are not successfully detected by Spearman rank correla...

  1. Cellular scanning strategy for selective laser melting: Generating reliable, optimized scanning paths and processing parameters

    DEFF Research Database (Denmark)

    Mohanty, Sankhya; Hattel, Jesper Henri

    2015-01-01

    to generate optimized cellular scanning strategies and processing parameters, with an objective of reducing thermal asymmetries and mechanical deformations. The optimized scanning strategies are used for selective laser melting of the standard samples, and experimental and numerical results are compared....... gradients that occur during the process. While process monitoring and control of selective laser melting is an active area of research, establishing the reliability and robustness of the process still remains a challenge.In this paper, a methodology for generating reliable, optimized scanning paths...

  2. Scanning tunneling microscopy III theory of STM and related scanning probe methods

    CERN Document Server

    Güntherodt, Hans-Joachim

    1996-01-01

    Scanning Tunneling Microscopy III provides a unique introduction to the theoretical foundations of scanning tunneling microscopy and related scanning probe methods. The different theoretical concepts developed in the past are outlined, and the implications of the theoretical results for the interpretation of experimental data are discussed in detail. Therefore, this book serves as a most useful guide for experimentalists as well as for theoreticians working in the filed of local probe methods. In this second edition the text has been updated and new methods are discussed.

  3. Relationship between Hounsfield unit in CT scan and gray scale in CBCT

    Science.gov (United States)

    Kamaruddin, Noorshaida; Rajion, Zainul Ahmad; Yusof, Asilah; Aziz, Mohd Ezane

    2016-12-01

    Cone-beam computed tomography (CBCT) is an imaging system which has advantages over computed tomography (CT). Recently, CBCT has become widely used for oral and maxillofacial imaging. In CT scan, Hounsfield Unit (HU) is proportional to the degree of x-ray attenuation by the tissue. In CBCT, the degree of x-ray attenuation is shown by gray scale (voxel value). The aim of the present (in vitro) study was to investigate the relationship between gray scale in CBCT and HU in CT scan. In this descriptive study, the anthropomorphic head phantom was scanned with CBCT and CT scanner. Gray scales and HUs were detected on images at the crown of the teeth, trabecular and cortical bone of mandible. The images were analyzed to obtain the gray scale value and HU value. The obtained value then used to investigate the relationship between CBCT gray scales and HUs. For the statistical analysis, t-test, Pearson's correlation and regression analysis were used. The differences between the gray scale of CBCT and HU of CT were statistically not significant, whereas the Pearson's correlation coefficients demonstrated a statistically significant correlation between gray scale of CBCT and HU of CT values. Considering the fact that gray scale in CBCT is important in pre assessment evaluation of bone density before implant treatments, it is recommended because of the lower dose and cost compared to CT scan.

  4. A comparison of scan and focal sampling for the description of wild primate activity, diet and intragroup spatial relationships.

    Science.gov (United States)

    Amato, Katherine R; Van Belle, Sarie; Wilkinson, Brianna

    2013-01-01

    We used data collected during two concurrent studies of black howler monkeys (Alouatta pigra) in Palenque National Park, Mexico, to compare systematically three methods of behavioral data collection [group activity scan sampling (group scans), instantaneous focal individual sampling (instantaneous focals) and continuous focal individual sampling (continuous focals)] and three methods of proximity data collection [group proximity scan sampling (group proximity scans), focal individual proximity scan sampling (focal proximity scans) and instantaneous focal individual nearest neighbor sampling (focal nearest neighbor samples)]. We conducted pairwise comparisons of data among methods using Pearson correlations and one-sample t tests. A series of Kruskal-Wallis tests were performed to compare the activity and proximity patterns of adult males, adult females and juveniles described by each method. The three behavioral data collection methods generally provided similar information about activity and diet. However, important differences for both activity and proximity data existed among methods. Instantaneous focals overestimated the percentage of time spent in social interactions, while group scans overestimated time spent moving and underestimated time spent feeding. Group proximity scans and focal proximity scans provided similar spatial data, while focal nearest neighbor samples were more appropriate for determining the influence of one individual on another at any given moment. These biases suggest the importance of deliberate method selection during project design and highlight the need for taking methods into account when comparing studies. Copyright © 2013 S. Karger AG, Basel.

  5. Linear Robot as The Approach towards Individual Abdominal Ultrasound Scanning in Developing Countries?

    Directory of Open Access Journals (Sweden)

    Christina Pahl

    2015-09-01

    Full Text Available In order to improve comfort in abdominal ultrasound scanning, reduce operator dependency and increase image resolution, a novel method for automatic ultrasound cervix scanning, especially for developing countries, has been developed. To determine the reference scanning point for customized diagnosis procedures, personalized scanning algorithms based on umbilicus detection are utilized. The setup consists of three linear motors controlled by an ATmega328 microcontroller and is based on real-time data of an IR sensor as feedback information. For testing purposes 10 subjects were scanned using a robotic platform. Robotically acquired data were compared with manually taken ultrasound images. Safety and image quality have been evaluated and approaches developed to counteract mentioned deficits. A correlation analysis as well as image quality classification between histograms and probe pressure image data was performed. Results show an automated method for personalized ultrasonography with a maximum accuracy of the defined scanning reference being 98.4 % for one dimension. It can be concluded that simple image processing techniques like 3D reconstruction and merging in combination with robotically guided ultrasound probe motion are highly efficient to counteract existing ultrasonography deficits. Future works consider the application of automated ultrasonography on related medical fields.

  6. Morphology and deflection properties of bat wing sensory hairs: scanning electron microscopy, laser scanning vibrometry, and mechanics model.

    Science.gov (United States)

    Sterbing-D'Angelo, S J; Liu, H; Yu, M; Moss, C F

    2016-08-22

    Bat wings are highly adaptive airfoils that enable demanding flight maneuvers, which are performed with astonishing robustness under turbulent conditions, and stability at slow flight velocities. The bat wing is sparsely covered with microscopically small, sensory hairs that are associated with tactile receptors. In a previous study we demonstrated that bat wing hairs are involved in sensing airflow for improved flight maneuverability. Here, we report physical measurements of these hairs and their distribution on the wing surface of the big brown bat, Eptesicus fuscus, based on scanning electron microscopy analyses. The wing hairs are strongly tapered, and are found on both the dorsal and ventral wing surfaces. Laser scanning vibrometry tests of 43 hairs from twelve locations across the wing of the big brown bat revealed that their natural frequencies inversely correlate with length and range from 3.7 to 84.5 kHz. Young's modulus of the average wing hair was calculated at 4.4 GPa, which is comparable with rat whiskers or arthropod airflow-sensing hairs.

  7. Comparison of dimensional accuracy of digital dental models produced from scanned impressions and scanned stone casts

    Science.gov (United States)

    Subeihi, Haitham

    Introduction: Digital models of dental arches play a more and more important role in dentistry. A digital dental model can be generated by directly scanning intraoral structures, by scanning a conventional impression of oral structures or by scanning a stone cast poured from the conventional impression. An accurate digital scan model is a fundamental part for the fabrication of dental restorations. Aims: 1. To compare the dimensional accuracy of digital dental models produced by scanning of impressions versus scanning of stone casts. 2. To compare the dimensional accuracy of digital dental models produced by scanning of impressions made of three different materials (polyvinyl siloxane, polyether or vinyl polyether silicone). Methods and Materials: This laboratory study included taking addition silicone, polyether and vinyl polyether silicone impressions from an epoxy reference model that was created from an original typodont. Teeth number 28 and 30 on the typodont with a missing tooth number 29 were prepared for a metal-ceramic three-unit fixed dental prosthesis with tooth #29 being a pontic. After tooth preparation, an epoxy resin reference model was fabricated by duplicating the typodont quadrant that included the tooth preparations. From this reference model 12 polyvinyl siloxane impressions, 12 polyether impressions and 12 vinyl polyether silicone impressions were made. All 36 impressions were scanned before pouring them with dental stone. The 36 dental stone casts were, in turn, scanned to produce digital models. A reference digital model was made by scanning the reference model. Six groups of digital models were produced. Three groups were made by scanning of the impressions obtained with the three different materials, the other three groups involved the scanning of the dental casts that resulted from pouring the impressions made with the three different materials. Groups of digital models were compared using Root Mean Squares (RMS) in terms of their

  8. Subperiosteal chondroma. Diagnostic value of CT scan imaging in two cases

    Energy Technology Data Exchange (ETDEWEB)

    Lerais, J.M.; Auquier, F.; Baudrillard, J.C.; Durot, J.F.; Laugareil, P.; Wallays, C.; Lefort, G.; Daoud, S.; Gaillard, D.

    1988-01-01

    Results of CT scan exploration are reported in two cases of subperiosteal chondroma, one in a 4 year old child affecting the anterior tibial tuberosity the other in a 9 year old child involving the upper end of humerus. Data from CT scan imaging were undoubtedly superior to those of conventional radiography and appear to be characteristic of this benign cartilaginous tumor, greatly facilitating correlation between clinical, radiological and pathologic findings. The scanner should allow certain situations to be dedramatized and the surgical attitude adapted when the functional prognosis is involved.

  9. Evaluation of cleft lip and palate by computed tomography with 2 mm thin slice scanning, 2

    Energy Technology Data Exchange (ETDEWEB)

    Uchiyama, Mayuki; Tanaka, Hiroshi; Harada, Junta (Jikei Univ., Tokyo (Japan). School of Medicine)

    1992-06-01

    Computed tomography was performed on 104 patients with cleft lip and palate by continuous 2 mm slice scanning. The type of hard palate was classified as normal, hypoplasia and aplasia, depending on its developmental degree. The shape of alveolus was also classified as circular, triangular and asymmetric forms for the evaluation of the maxillary development. The hard palate development correlated with the shape of the alveolus, the diameter of maxillary and mandibular bone, and frequency of sinusitis and otitis media. Evaluation of the hard palate by thin slice scanning is useful in presumption of future fecial development. (author).

  10. High-speed massively parallel scanning

    Science.gov (United States)

    Decker, Derek E.

    2010-07-06

    A new technique for recording a series of images of a high-speed event (such as, but not limited to: ballistics, explosives, laser induced changes in materials, etc.) is presented. Such technique(s) makes use of a lenslet array to take image picture elements (pixels) and concentrate light from each pixel into a spot that is much smaller than the pixel. This array of spots illuminates a detector region (e.g., film, as one embodiment) which is scanned transverse to the light, creating tracks of exposed regions. Each track is a time history of the light intensity for a single pixel. By appropriately configuring the array of concentrated spots with respect to the scanning direction of the detection material, different tracks fit between pixels and sufficient lengths are possible which can be of interest in several high-speed imaging applications.

  11. Contextual Analysis of CT Scanned Pig Carcasses

    DEFF Research Database (Denmark)

    Lyckegaard, Allan; Larsen, Rasmus; Christensen, Lars Bager;

    2006-01-01

    Knowledge of the weight of tissue types in pig carcasses is generally only available after manual dissection. The use of computed tomography (CT) has demonstrated to be a promising approach to gain knowledge on the lean meat weight (Romvari, 2005), but less effort has been put into gaining...... knowledge about the weight of other tissue types from CT. Knowing the weight of individual tissue types will directly give access to other measures such as the weight of the carcass and the Lean Meat Percentage (LMP). Until now, most analyses of CT scans have been based on the Hounsfield spectra that does...... not consider the spatial context in CT scan. Applying contextual methods from the field of image analysis we hope to make a virtual dissection of pig carcasses....

  12. CS-Studio Scan System Parallelization

    Energy Technology Data Exchange (ETDEWEB)

    Kasemir, Kay [ORNL; Pearson, Matthew R [ORNL

    2015-01-01

    For several years, the Control System Studio (CS-Studio) Scan System has successfully automated the operation of beam lines at the Oak Ridge National Laboratory (ORNL) High Flux Isotope Reactor (HFIR) and Spallation Neutron Source (SNS). As it is applied to additional beam lines, we need to support simultaneous adjustments of temperatures or motor positions. While this can be implemented via virtual motors or similar logic inside the Experimental Physics and Industrial Control System (EPICS) Input/Output Controllers (IOCs), doing so requires a priori knowledge of experimenters requirements. By adding support for the parallel control of multiple process variables (PVs) to the Scan System, we can better support ad hoc automation of experiments that benefit from such simultaneous PV adjustments.

  13. Environmental scanning electron microscopy in cell biology.

    Science.gov (United States)

    McGregor, J E; Staniewicz, L T L; Guthrie Neé Kirk, S E; Donald, A M

    2013-01-01

    Environmental scanning electron microscopy (ESEM) (1) is an imaging technique which allows hydrated, insulating samples to be imaged under an electron beam. The resolution afforded by this technique is higher than conventional optical microscopy but lower than conventional scanning electron microscopy (CSEM). The major advantage of the technique is the minimal sample preparation needed, making ESEM quick to use and the images less susceptible to the artifacts that the extensive sample preparation usually required for CSEM may introduce. Careful manipulation of both the humidity in the microscope chamber and the beam energy are nevertheless essential to prevent dehydration and beam damage artifacts. In some circumstances it is possible to image live cells in the ESEM (2).In the following sections we introduce the fundamental principles of ESEM imaging before presenting imaging protocols for plant epidermis, mammalian cells, and bacteria. In the first two cases samples are imaged using the secondary electron (topographic) signal, whereas a transmission technique is employed to image bacteria.

  14. Data compression of scanned halftone images

    DEFF Research Database (Denmark)

    Forchhammer, Søren; Jensen, Kim S.

    1994-01-01

    A new method for coding scanned halftone images is proposed. It is information-lossy, but still preserving the image quality, compression rates of 16-35 have been achieved for a typical test image scanned on a high resolution scanner. The bi-level halftone images are filtered, in phase...... with the halftone grid, and converted to a gray level representation. A new digital description of (halftone) grids has been developed for this purpose. The gray level values are coded according to a scheme based on states derived from a segmentation of gray values. To enable real-time processing of high resolution...... scanner output, the coding has been parallelized and implemented on a transputer system. For comparison, the test image was coded using existing (lossless) methods giving compression rates of 2-7. The best of these, a combination of predictive and binary arithmetic coding was modified and optimized...

  15. Scanning Josephson spectroscopy on the atomic scale

    Science.gov (United States)

    Randeria, Mallika T.; Feldman, Benjamin E.; Drozdov, Ilya K.; Yazdani, Ali

    2016-04-01

    The Josephson effect provides a direct method to probe the strength of the pairing interaction in superconductors. By measuring the phase fluctuating Josephson current between a superconducting tip of a scanning tunneling microscope and a BCS superconductor with isolated magnetic adatoms on its surface, we demonstrate that the spatial variation of the pairing order parameter can be characterized on the atomic scale. This system provides an example where the local pairing potential suppression is not directly reflected in the spectra measured via quasiparticle tunneling. Spectroscopy with such superconducting tips also shows signatures of previously unexplored Andreev processes through individual impurity-bound Shiba states. The atomic resolution achieved here establishes scanning Josephson spectroscopy as a promising technique for the study of novel superconducting phases.

  16. Quantitative bone scanning after asymptomatic Charnley arthroplasty

    Energy Technology Data Exchange (ETDEWEB)

    Mullaji, A.B. (University Department of Orthopedic and Accident Surgery, Royal Liverpool University Hospital, Lierpool (United Kingdom)); Tood, R.C. (Department of Orthopedics, Black Notley Hospital, Braintree (United Kingdom)); Robinson, S. (Department of MedicaL Physics, Colchester General Hospital, Colchester (United Kingdom)); Critchley, M. (Department of Nuclear Medicine, Royal Liverpool University Hospital, Liverpool (United Kingdom))

    1994-06-01

    To establish the normal pattern of postoperative tracer uptake we performed 73 [sup 99m]technetium methylene disphosphonate scans following primary Charnley hip replacements for arthrosis in 68 patients without clinical, hematological and radiographic complications. The patients were divided into 7 subgroups according to the period, 6-24 months, between surgery and scan. There were 10-12 patients in each subgroup. A high-resolution gamma camera with a large filed of view was used. Ratios of uptake in each of 10 peri-prosthetic zones to normal bone were calculated. Femoral uptake was found to decrease in linear fashion from 6 to 12 months after surgery. Thereafter the uptake remained unaltered at levels nearly twice the normal ones in the greater trochanter and nearly 1.5 times in the lesser trochanter, returning to almost normal levels in other zones. Acetabular uptake remained elevated throughout. (au) (20 refs.).

  17. Development of Scanning Ultrafast Electron Microscope Capability.

    Energy Technology Data Exchange (ETDEWEB)

    Collins, Kimberlee Chiyoko [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Talin, Albert Alec [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Chandler, David W. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Michael, Joseph R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-11-01

    Modern semiconductor devices rely on the transport of minority charge carriers. Direct examination of minority carrier lifetimes in real devices with nanometer-scale features requires a measurement method with simultaneously high spatial and temporal resolutions. Achieving nanometer spatial resolutions at sub-nanosecond temporal resolution is possible with pump-probe methods that utilize electrons as probes. Recently, a stroboscopic scanning electron microscope was developed at Caltech, and used to study carrier transport across a Si p-n junction [ 1 , 2 , 3 ] . In this report, we detail our development of a prototype scanning ultrafast electron microscope system at Sandia National Laboratories based on the original Caltech design. This effort represents Sandia's first exploration into ultrafast electron microscopy.

  18. Scanning Tunneling Spectroscope Use in Electrocatalysis Testing

    Science.gov (United States)

    Knutsen, Turid

    2010-01-01

    The relationship between the electrocatalytic properties of an electrode and its ability to transfer electrons between the electrode and a metallic tip in a scanning tunneling microscope (STM) is investigated. The alkaline oxygen evolution reaction (OER) was used as a test reaction with four different metallic glasses, Ni78Si8B14, Ni70Mo20Si5B5, Ni58Co20Si10B12, and Ni25Co50Si15B10, as electrodes. The electrocatalytic properties of the electrodes were determined. The electrode surfaces were then investigated with an STM. A clear relationship between the catalytic activity of an electrode toward the OER and its tunneling characteristics was found. The use of a scanning tunneling spectroscope (STS) in electrocatalytic testing may increase the efficiency of the optimization of electrochemical processes.

  19. Scanning Tunneling Spectroscope Use in Electrocatalysis Testing

    Directory of Open Access Journals (Sweden)

    Turid Knutsen

    2010-06-01

    Full Text Available The relationship between the electrocatalytic properties of an electrode and its ability to transfer electrons between the electrode and a metallic tip in a scanning tunneling microscope (STM is investigated. The alkaline oxygen evolution reaction (OER was used as a test reaction with four different metallic glasses, Ni78Si8B14, Ni70Mo20Si5B5, Ni58Co20Si10B12, and Ni25Co50Si15B10, as electrodes. The electrocatalytic properties of the electrodes were determined. The electrode surfaces were then investigated with an STM. A clear relationship between the catalytic activity of an electrode toward the OER and its tunneling characteristics was found. The use of a scanning tunneling spectroscope (STS in electrocatalytic testing may increase the efficiency of the optimization of electrochemical processes.

  20. Scanning Electron Microscopy Sample Preparation and Imaging.

    Science.gov (United States)

    Nguyen, Jenny Ngoc Tran; Harbison, Amanda M

    2017-01-01

    Scanning electron microscopes allow us to reach magnifications of 20-130,000× and resolve compositional and topographical images with intense detail. These images are created by bombarding a sample with electrons in a focused manner to generate a black and white image from the electrons that bounce off of the sample. The electrons are detected using positively charged detectors. Scanning electron microscopy permits three-dimensional imaging of desiccated specimens or wet cells and tissues by using variable pressure chambers. SEM ultrastructural analysis and intracellular imaging supplement light microscopy for molecular profiling of prokaryotes, plants, and mammals. This chapter demonstrates how to prepare and image samples that are (a) desiccated and conductive, (b) desiccated and nonconductive but coated with an electron conductive film using a gold sputter coater, and (c) wet and maintained in a hydrated state using a Deben Coolstage.

  1. Automatic scanning of NTA film neutron dosimeters

    CERN Document Server

    Müller, R

    1999-01-01

    At the European Laboratory for Particle Physics CERN, personal neutron monitoring for over 4000 collaborators is performed with Kodak NTA film, one of the few suitable dosemeters in the stray radiation environment of a high energy accelerator. After development, films are scanned with a projection microscope. To overcome this lengthy and strenuous procedure an automated analysis system for the dosemeters has been developed. General purpose image recognition software, tailored to the specific needs with a macro language, analyses the digitised microscope image. This paper reports on the successful automatic scanning of NTA films irradiated with neutrons from a /sup 238/Pu-Be source (E approximately=4 MeV), as well as on the extension of the method to neutrons of higher energies. The question of detection limits is discussed in the light of an application of the method in routine personal neutron monitoring. (9 refs).

  2. ComPoScan: Adaptive Scanning for Efficient Concurrent Communications and Positioning with 802.11

    DEFF Research Database (Denmark)

    King, Thomas; Kjærgaard, Mikkel Baun

    2008-01-01

    active scanning to allow positioning and to minimize the impact on the data flow. The system is configurable to realize different trade-offs between position accuracy and the level of communication interruption. We provide extensive experimental results by emulation on data collected at several sites......Using 802.11 concurrently for communications and positioning is problematic, especially if location-based services (e.g., indoor navigation) are concurrently executed with real-time applications (e.g., VoIP, video conferencing). Periodical scanning for measuring the signal strength interrupts...... the data flow. Reducing the scan frequency is no option because it hurts the position accuracy. For this reason, we need an adaptive technique to mitigate this problem. This work proposes ComPoScan which, based on movement detection, adaptively switches between light-weight monitor sniffing and invasive...

  3. SCANNING VISION SYSTEM FOR VEHICLE NAVIGATION

    OpenAIRE

    O. Sergiyenko

    2012-01-01

    The new model of the scanning vision system for vehicles is offered. The questions of creation, functioning and interaction of the system units and elements are considered. The mathematical apparatus for processing digital information inside the system and for determining distances and an-gle standard in the offered system is worked out. Expected accuracy, functioning speed, range of ac-tion, energy consumption when using the system are determined. The possible areas of the developed automa...

  4. Scanning electron microscopy of superficial white onychomycosis*

    Science.gov (United States)

    de Almeida Jr., Hiram Larangeira; Boabaid, Roberta Oliveira; Timm, Vitor; Silva, Ricardo Marques e; de Castro, Luis Antonio Suita

    2015-01-01

    Superficial white onychomycosis is characterized by opaque, friable, whitish superficial spots on the nail plate. We examined an affected halux nail of a 20-year-old male patient with scanning electron microscopy. The mycological examination isolated Trichophyton mentagrophytes. Abundant hyphae with the formation of arthrospores were found on the nail's surface, forming small fungal colonies. These findings showed the great capacity for dissemination of this form of onychomycosis. PMID:26560225

  5. Differential scanning calorimetry (DSC) of semicrystalline polymers.

    Science.gov (United States)

    Schick, C

    2009-11-01

    Differential scanning calorimetry (DSC) is an effective analytical tool to characterize the physical properties of a polymer. DSC enables determination of melting, crystallization, and mesomorphic transition temperatures, and the corresponding enthalpy and entropy changes, and characterization of glass transition and other effects that show either changes in heat capacity or a latent heat. Calorimetry takes a special place among other methods. In addition to its simplicity and universality, the energy characteristics (heat capacity C(P) and its integral over temperature T--enthalpy H), measured via calorimetry, have a clear physical meaning even though sometimes interpretation may be difficult. With introduction of differential scanning calorimeters (DSC) in the early 1960s calorimetry became a standard tool in polymer science. The advantage of DSC compared with other calorimetric techniques lies in the broad dynamic range regarding heating and cooling rates, including isothermal and temperature-modulated operation. Today 12 orders of magnitude in scanning rate can be covered by combining different types of DSCs. Rates as low as 1 microK s(-1) are possible and at the other extreme heating and cooling at 1 MK s(-1) and higher is possible. The broad dynamic range is especially of interest for semicrystalline polymers because they are commonly far from equilibrium and phase transitions are strongly time (rate) dependent. Nevertheless, there are still several unsolved problems regarding calorimetry of polymers. I try to address a few of these, for example determination of baseline heat capacity, which is related to the problem of crystallinity determination by DSC, or the occurrence of multiple melting peaks. Possible solutions by using advanced calorimetric techniques, for example fast scanning and high frequency AC (temperature-modulated) calorimetry are discussed.

  6. High-speed scanning: an improved algorithm

    Science.gov (United States)

    Nachimuthu, A.; Hoang, Khoi

    1995-10-01

    In using machine vision for assessing an object's surface quality, many images are required to be processed in order to separate the good areas from the defective ones. Examples can be found in the leather hide grading process; in the inspection of garments/canvas on the production line; in the nesting of irregular shapes into a given surface... . The most common method of subtracting the total area from the sum of defective areas does not give an acceptable indication of how much of the `good' area can be used, particularly if the findings are to be used for the nesting of irregular shapes. This paper presents an image scanning technique which enables the estimation of useable areas within an inspected surface in terms of the user's definition, not the supplier's claims. That is, how much useable area the user can use, not the total good area as the supplier estimated. An important application of the developed technique is in the leather industry where the tanner (the supplier) and the footwear manufacturer (the user) are constantly locked in argument due to disputed quality standards of finished leather hide, which disrupts production schedules and wasted costs in re-grading, re- sorting... . The developed basic algorithm for area scanning of a digital image will be presented. The implementation of an improved scanning algorithm will be discussed in detail. The improved features include Boolean OR operations and many other innovative functions which aim at optimizing the scanning process in terms of computing time and the accurate estimation of useable areas.

  7. Manipulating atoms using scanning probe microscopy

    OpenAIRE

    Norris, Andrew Christopher

    2009-01-01

    Manipulating species using Scanning Probe Microscopy (SPM) is an important discipline in the field of bottom-up fabrication, which facilitates nano-mechanics and electron dynamics investigations. Previous low temperature manipulation highlights include the construction of quantum dots, nano-wires and quantum corrals, all of which began in 1989 with Don Eigler’s iconic writing of I-B-M using 35 xenon atoms. Since then, the field has developed, and we now push, pull, hop, excite, desorb, rotate...

  8. Sample preparation method for scanning force microscopy

    CERN Document Server

    Jankov, I R; Szente, R N; Carreno, M N P; Swart, J W; Landers, R

    2001-01-01

    We present a method of sample preparation for studies of ion implantation on metal surfaces. The method, employing a mechanical mask, is specially adapted for samples analysed by Scanning Force Microscopy. It was successfully tested on polycrystalline copper substrates implanted with phosphorus ions at an acceleration voltage of 39 keV. The changes of the electrical properties of the surface were measured by Kelvin Probe Force Microscopy and the surface composition was analysed by Auger Electron Spectroscopy.

  9. Variable - temperature scanning optical and force microscope

    OpenAIRE

    2004-01-01

    The implementation of a scanning microscope capable of working in confocal, atomic force and apertureless near field configurations is presented. The microscope is designed to operate in the temperature range 4 - 300 K, using conventional helium flow cryostats. In AFM mode, the distance between the sample and an etched tungsten tip is controlled by a self - sensing piezoelectric tuning fork. The vertical position of both the AFM head and microscope objective can be accurately controlled using...

  10. Explicit correlation factors

    Science.gov (United States)

    Johnson, Cole M.; Hirata, So; Ten-no, Seiichiro

    2017-09-01

    We analyze the performance of 17 different correlation factors in explicitly correlated second-order many-body perturbation calculations for correlation energies. Highly performing correlation factors are found to have near-universal shape and size in the short range of electron-electron distance (0 1.5 a.u.) is insignificant insofar as the factor becomes near constant, leaving an orbital expansion to describe decoupled electrons. An analysis based on a low-rank Taylor expansion of the correlation factor seems limited, except that a negative second derivative with the value of around -1.3 a.u. correlates with high performance.

  11. A Study on Clinical Activity of Myositis by the Use of Radioisotope Bone Scan in the Patients with Dermatomyositis - polymyositis

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Sung Jae; Koh, Chang Soon [Seoul National University College of Medicine, Seoul (Korea, Republic of)

    1982-03-15

    To evaluate the diagnostic usefulness of radioisotope bone scan and clinical activity of myositis, bone scan using {sup 99m}Tc-Methylene diphosphonate was serially done before and after treatment with prednisolone in 10 patients with well- documented dermatomyositis-polymyositis. The observed results were as follows. 1. In all 10 patients before treatment with prednisolone, the bone scans showed evidence of increased muscle uptake. Muscle uptake was markedly increased in 4 patients, moderately increased in 3 patients and minimally increased in 3 patients. 2. The site of increased muscle uptake was consistent with the site of clinically involved muscle which was weak and tender. 3. The degree of muscle uptake correlated with the severity of the muscle weakness and tenderness at the scan was done. In all 10 patients treated with high dose prednisolone, muscle uptake was decreased following therapy. Above results suggest the radioisotope bone scanning may be useful in the diagnosis and treatment of patient with dermatomyositis-polymyositis.

  12. Scanning Motion; Opto-Mechanical Considerations

    Science.gov (United States)

    Reiss, Roger S.

    1988-11-01

    The field of electro-optics has grown enormously in the last 25 years. As a consequence, both optics and optical engineering have mushroomed. The mechanical engineer, during this period, has been patiently providing the necessary support technology to achieve precision instrument design. Within the last 5 years, the discipline of opto-mechanical engineering has been emerging as a driving force to channel information to the precision mechanical engineer. In an overview article, "Opto-Mechanical Instrument Design", one of the key subtopics is "Scanning Motion." This paper is about that subtopic, specifically directed to the precision mechanical engineer and his involvement with Mirror Scanning Motion Systems. The purpose of this paper is to inform the mechanical engineer as to the many considerations necessary during the design and development of a precision instrument. The logical starting point will be the fundamentals for opto-mechanical engineering as established by Dan Vukobratovich. The glossary at the end is an attempt to define many of the terms in his notes, plus any others that have arisen. These definitions are not for the physicist, electrical engineer, or mathematician, but for the mechanical engineer. The body of this paper covers over fifty papers which can be located by using the key words "mirror" and "scanning" and limiting the search to the past 5 years.

  13. Synthetic holography based on scanning microcavity

    Directory of Open Access Journals (Sweden)

    A. Di Donato

    2015-11-01

    Full Text Available Synthetic optical holography (SOH is an imaging technique, introduced in scanning microscopy to record amplitude and phase of a scattered field from a sample. In this paper, it is described a novel implementation of SOH through a lens-free low-coherence system, based on a scanning optical microcavity. This technique combines the low-coherence properties of the source with the mutual interference of scattered waves and the resonant behavior of a micro-cavity, in order to realize a high sensitive imaging system. Micro-cavity is compact and realized by approaching a cleaved optical fiber to the sample. The scanning system works in an open-loop configuration without the need for a reference wave, usually required in interferometric systems. Measurements were performed over calibration samples and a lateral resolution of about 1 μm is achieved by means of an optical fiber with a Numerical Aperture (NA equal to 0.1 and a Mode Field Diameter (MDF of 5.6 μm.

  14. Optical scanning cryptography for secure wireless transmission

    Science.gov (United States)

    Poon, Ting-Chung; Kim, Taegeun; Doh, Kyu

    2003-11-01

    We propose a method for secure wireless transmission of encrypted information. By use of an encryption key, an image or document is optically encrypted by optical heterodyne scanning and hence encryption is performed on the fly. We call this technique optical scanning cryptography. The output of the heterodyne encrypted signal is at radio frequency and can be directly sent through an antenna to a secure site for digital storage to be prepared for decryption. In the secure site, an identical optical scanning system to that used for encryption is used, together with a decryption key, to generate an electrical signal. The electrical signal is then processed and sent to a computer to be used for decryption. Utilizing the stored information received from the encryption stage and the electrical information from the secure site, a digital decryption unit performs a decryption algorithm. If the encryption key and the decryption key are matched, the decryption unit will decrypt the image or document faithfully. The overall cryptosystem can perform the incoherent optical processing counterpart of the well-known coherent double-random phase-encoding technique. We present computer simulations of the idea.

  15. Photometric Repeatability of Scanned Imagery: UVIS

    Science.gov (United States)

    Shanahan, Clare E.; McCullough, Peter; Baggett, Sylvia

    2017-08-01

    We provide the preliminary results of a study on the photometric repeatability of spatial scans of bright, isolated white dwarf stars with the UVIS channel of the Wide Field Camera 3 (WFC3) on the Hubble Space Telescope (HST). We analyze straight-line scans from the first pair of identical orbits of HST program 14878 to assess if sub 0.1% repeatability can be attained with WFC3/UVIS. This study is motivated by the desire to achieve better signal-to-noise in the UVIS contamination and stability monitor, in which observations of standard stars in staring mode have been taken from the installation of WFC3 in 2009 to the present to assess temporal photometric stability. Higher signal to noise in this program would greatly benefit the sensitivity to detect contamination, and to better characterize the observed small throughput drifts over time. We find excellent repeatability between identical visits of program 14878, with sub 0.1% repeatability achieved in most filters. These! results support the initiative to transition the staring mode UVIS contamination and photometric stability monitor from staring mode images to spatial scans.

  16. Impact echo scanning of concrete and wood

    Science.gov (United States)

    Sack, Dennis A.; Olson, Larry D.; Aouad, Marwan F.

    1995-05-01

    This paper presents an overview of a new nondestructive testing (NDT) system that allows rapid nondestructive assessment of many types of structural materials. The new system is based on scanning impact echo (IE), using a rolling receiver, digitally controlled impact source, and a distance measurement wheel integrated into a system that is capable of performing over 3000 IE tests per hour. The system has been successfully used on both concrete and wood for condition assessment. Previously, impact echo testing has been limited to point-by-point testing at rates of typically 30 - 60 points per hour. The new system is usable on any flat, relatively smooth surface such as floor slabs, pavements, walls, columns, beams, etc. In addition to IE scanning, the new system has recently been expanded to allow the performance of spectral analysis of surface waves (SASW) scanning on concrete and wood. The SASW method allows the measurement of material stiffness (modulus) versus depth, and therefore can give a profile of the material condition versus depth. Included in this paper are brief discussions of the IE and SASW methods, the scanner system hardware, and the software which was developed to enable efficient processing, analysis, and display of the test data and results. Also included are sample data plots and a case history presentation of the use of the system in the field, including one in which 23,000 IE tests were performed on an elevated floor slab in approximately 16 hours of testing time.

  17. Optical scanning cryptography for secure wireless transmission.

    Science.gov (United States)

    Poon, Ting-Chung; Kim, Taegeun; Doh, Kyu

    2003-11-10

    We propose a method for secure wireless transmission of encrypted information. By use of an encryption key, an image or document is optically encrypted by optical heterodyne scanning and hence encryption is performed on the fly. We call this technique optical scanning cryptography. The output of the heterodyne encrypted signal is at radio frequency and can be directly sent through an antenna to a secure site for digital storage to be prepared for decryption. In the secure site, an identical optical scanning system to that used for encryption is used, together with a decryption key, to generate an electrical signal. The electrical signal is then processed and sent to a computer to be used for decryption. Utilizing the stored information received from the encryption stage and the electrical information from the secure site, a digital decryption unit performs a decryption algorithm. If the encryption key and the decryption key are matched, the decryption unit will decrypt the image or document faithfully. The overall cryptosystem can perform the incoherent optical processing counterpart of the well-known coherent double-random phase-encoding technique. We present computer simulations of the idea.

  18. Further progress for a fast scanning of nuclear emulsions with Large Angle Scanning System

    Science.gov (United States)

    Alexandrov, A.; Tioukov, V.; Vladymyrov, M.

    2014-02-01

    The LASSO (Large Angle Scanning System for OPERA) is a scanning system designed in the framework of the OPERA experiment as a result of several R&Ds aimed to improve the performance of the European Scanning System (ESS) by increasing the scanning speed, the angular acceptance and the efficiency in microtrack reconstruction. The novel Continuous Motion (CM) scanning approach allows to double the ESS nominal speed without any changes in the hardware set-up. The LASSO modular design makes the system easily adaptable to new hardware. The novel microtrack reconstruction algorithm has been developed to be efficient in both standard Stop&Go (SG) and CM modes, performing a number of corrections during the processing like corrections for vibrations, optical distortions, field of view curvature. As an intermediate step it reconstructs silver grains positions inside emulsion layer to make a transition from 2D images to real 3D traces of a charged particle. This allows the algorithm to have no internal limits on the slope of microtracks being equally efficient on all angles. The LASSO has been used for about one year for mass production scanning of emulsion films of OPERA, Muon Radiography and also of films employed to study nuclear fragmentation of ion beams used in medical physics. More than 50000 cm2 of the emulsion surface have been analyzed during this period.

  19. Multidetector row computed tomography of acute pancreatitis: Utility of single portal phase CT scan in short-term follow up

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, Yongwonn [Department of Radiology, Konkuk University Medical Center, 4-12, Hwayang-dong, Gwangjin-gu, Seoul 143-729 (Korea, Republic of); Park, Hee Sun, E-mail: heesun.park@gmail.com [Department of Radiology, Konkuk University Medical Center, 4-12, Hwayang-dong, Gwangjin-gu, Seoul 143-729 (Korea, Republic of); Kim, Young Jun; Jung, Sung Il; Jeon, Hae Jeong [Department of Radiology, Konkuk University Medical Center, 4-12, Hwayang-dong, Gwangjin-gu, Seoul 143-729 (Korea, Republic of)

    2012-08-15

    Objective: The purpose of this study is to evaluate the question of whether nonenhanced CT or contrast enhanced portal phase CT can replace multiphasic pancreas protocol CT in short term monitoring in patients with acute pancreatitis. Materials and methods: This retrospective study was approved by the Institutional Review Board. From April 2006 to May 2010, a total of 52 patients having acute pancreatitis who underwent initial dual phase multidetector row CT (unenhanced, arterial, and portal phase) at admission and a short term (within 30 days) follow up dual phase CT (mean interval 10.3 days, range 3-28 days) were included. Two abdominal radiologists performed an independent review of three sets of follow up CT images (nonenhanced scan, single portal phase scan, and dual phase scan). Interpretation of each image set was done with at least 2-week interval. Radiologists evaluated severity of acute pancreatitis with regard to pancreatic inflammation, pancreatic necrosis, and extrapancreatic complication, based on the modified CT severity index. Scores of each image set were compared using a paired t-test and interobserver agreement was evaluated using intraclass correlation coefficient statistics. Results: Mean scores of sum of CT severity index on nonenhanced scan, portal phase scan, and dual phase scan were 5.7, 6.6, and 6.5 for radiologist 1, and 5.0, 5.6, and 5.8 for radiologist 2, respectively. In both radiologists, contrast enhanced scan (portal phase scan and dual phase scan) showed significantly higher severity score compared with that of unenhanced scan (P < 0.05), while portal phase and dual phase scan showed no significant difference each other. The trend was similar regarding pancreatic inflammation and extrapancreatic complications, in which contrast enhanced scans showed significantly higher score compared with those of unenhanced scan, while no significant difference was observed between portal phase scan and dual phase scan. In pancreatic necrosis

  20. Atlas of neuroanatomy with radiologic correlation and pathologic illustration

    Energy Technology Data Exchange (ETDEWEB)

    Dublin, A.B.; Dublin, W.B.

    1982-01-01

    This atlas correlates gross neuroanatomic specimens with radiographs and computed tomographic scans. Pathologic specimens and radiographs are displayed in a similar manner. The first chapter, on embryology, shows the development of the telencephalon, diencephalon, mesencephalon, and metencephalon through a series of overlays. The anatomical section shows the surface of the brain, the ventricles and their adjacent structures, and the vascular system. CT anatomy is demonstrated by correlating CT scans with pathologic brain specimens cut in the axial plane. Pathologic changes associated with congenital malformations, injections, injuries, tumors, and other causes are demonstrated in the last six chapters.