WorldWideScience

Sample records for clinical global impressions-improvement

  1. The improved Clinical Global Impression Scale (iCGI: development and validation in depression

    Directory of Open Access Journals (Sweden)

    Kadouri Alane

    2007-02-01

    Full Text Available Abstract Background The Clinical Global Impression scale (CGI is frequently used in medical care and clinical research because of its face validity and practicability. This study proposes to improve the reliability of the Clinical Global Impression (CGI scale in depressive disorders by the use of a semi-standardized interview, a new response format, and a Delphi procedure. Methods Thirty patients hospitalised for a major depressive episode were filmed at T1 (first week in hospital and at T2 (2 weeks later during a 5' specific interview. The Hamilton Depressive Rating Scale and the Symptom Check List were also rated. Eleven psychiatrists rated these videos using either the usual CGI response format or an improved response format, with or without a Delphi procedure. Results The new response format slightly improved (but not significantly the interrater agreement, the Delphi procedure did not. The best results were obtained when ratings by 4 independent raters were averaged. In this situation, intraclass correlation coefficients were about 0.9. Conclusion The Clinical Global Impression is a useful approach in psychiatry since it apprehends patients in their entirety. This study shows that it is possible to quantify such impressions with a high level of interrater agreement.

  2. Development and Psychometric Evaluation of a Clinical Global Impression for Schizoaffective Disorder Scale

    OpenAIRE

    Allen, Michael H; Daniel, David G; Revicki, Dennis A; Canuso, Carla M; Turkoz, Ibrahim; Fu, Dong-Jing; Alphs, Larry; Ishak, K. Jack; Bartko, John J; Lindenmayer, Jean-Pierre

    2012-01-01

    Objective: The Clinical Global Impression for Schizoaffective Disorder scale is a new rating scale adapted from the Clinical Global Impression scale for use in patients with schizoaffective disorder. The psychometric characteristics of the Clinical Global Impression for Schizoaffective Disorder are described.

  3. Development and psychometric evaluation of a clinical global impression for schizoaffective disorder scale.

    Science.gov (United States)

    Allen, Michael H; Daniel, David G; Revicki, Dennis A; Canuso, Carla M; Turkoz, Ibrahim; Fu, Dong-Jing; Alphs, Larry; Ishak, K Jack; Bartko, John J; Lindenmayer, Jean-Pierre

    2012-01-01

    The Clinical Global Impression for Schizoaffective Disorder scale is a new rating scale adapted from the Clinical Global Impression scale for use in patients with schizoaffective disorder. The psychometric characteristics of the Clinical Global Impression for Schizoaffective Disorder are described. Content validity was assessed using an investigator questionnaire. Inter-rater reliability was determined with 12 sets of videotaped interviews rated independently by two trained individuals. Test-retest reliability was assessed using 30 randomly selected raters from clinical trials who evaluated the same videos on separate occasions two weeks apart. Convergent and divergent validity and effect size were evaluated by comparing scores between the Clinical Global Impression for Schizoaffective Disorder and the Positive and Negative Syndrome Scale, 21-item Hamilton Rating Scale for Depression, and Young Mania Rating Scale scales using pooled patient data from two clinical trials. Clinical Global Impression for Schizoaffective Disorder scores were then linked to corresponding Positive and Negative Syndrome Scale scores. Content validity was strong. Inter-rater agreement was good to excellent for most scales and subscales (intra-class correlation coefficient ≥ 0.50). Test-retest showed good reproducibility, with intraclass correlation coefficients ranging from 0.444 to 0.898. Spearman correlations between Clinical Global Impression for Schizoaffective Disorder domains and corresponding symptom scales were 0.60 or greater, and effect sizes for Clinical Global Impression for Schizoaffective Disorder overall and domain scores were similar to Positive and Negative Syndrome Scale Young Mania Rating Scale, and 21-item Hamilton Rating Scale for Depression scores. Raters anticipated that the scale might be less effective in distinguishing negative from depressive symptoms, and, in fact, the results here may reflect that clinical reality. Multiple lines of evidence support the

  4. Clinical Global Impression of Improvement (CGI-I) as a valid proxy measure for remission in schizophrenia: analyses of ziprasidone clinical study data.

    Science.gov (United States)

    Masand, Prakash; O'Gorman, Cedric; Mandel, Francine S

    2011-03-01

    To determine the degree to which a proxy measure of remission in schizophrenia correlates with the criteria identified by the Remission in Schizophrenia Working Group, and how well early treatment response to ziprasidone predicts remission. Data from 10 ziprasidone studies were analyzed to determine rates of remission achieved with ziprasidone using a remission definition of Clinical Global Impression of Improvement (CGI-I) of 1, and compared with rates of remission achieved using the remission working group criteria. Positive and Negative Syndrome Scale (PANSS) and Brief Psychiatric Rating Scale (BPRS) scores were then investigated as predictors of remission. A CGI-I score of 1 correlated with the remission criteria developed by the remission working group. In the combined ziprasidone arms, BPRS scores at Weeks 1, 3, and 4 successfully predicted PANSS remission (pproxy measure for the assessment of remission should be easy to apply in a clinical setting and facilitates the prediction of remission in schizophrenia. Copyright © 2010 Elsevier B.V. All rights reserved.

  5. Calculating Clinically Significant Change: Applications of the Clinical Global Impressions (CGI) Scale to Evaluate Client Outcomes in Private Practice

    Science.gov (United States)

    Kelly, Peter James

    2010-01-01

    The Clinical Global Impressions (CGI) scale is a therapist-rated measure of client outcome that has been widely used within the research literature. The current study aimed to develop reliable and clinically significant change indices for the CGI, and to demonstrate its application in private psychological practice. Following the guidelines…

  6. Personalized Symptom Goals and Patient Global Impression on Clinical Changes in Advanced Cancer Patients.

    Science.gov (United States)

    Mercadante, Sebastiano; Adile, Claudio; Lanzetta, Gaetano; Mystakidou, Kyriaki; Maltoni, Marco; Soares, Luiz Guilherme; De Santis, Stefano; Ferrera, Patrizia; Valenti, Marco; Rosati, Marta; Rossi, Romina; Cortegiani, Andrea; Masedu, Francesco; Marinangeli, Franco; Aielli, Federica

    2018-05-16

    The aim of this study was to assess the patients' global impression (PGI) after symptom management, as well as the achievement of personalized symptom goals (PSG). The secondary outcome was to assess related factors. Subjects, Materials, and Methods . Advanced cancer patients admitted to palliative care units rated symptom intensity by using the Edmonton Symptom Assessment Score (ESAS) at admission and then after 1 week. For each symptom, patient-reported PGI and PSG, as well as the rate of PSG response, were evaluated. Eight hundred seventy-six patients were taken into consideration for this study. A mean of 1.71-2.16 points was necessary to perceive a bit better improvement of symptom intensity. Most patients had a PSG of ≤3. A statistically significant number of patients achieved their PSG after starting palliative care. Patients with high intensity of ESAS items at admission achieved a more favorable PGI response. In the multivariate analysis, symptom intensity and PSG were the most frequent factors independently associated to a best PGI, whereas high levels of Karnofsky had a lower odd ratio. PSG and PGI seem to be relevant for patients' assessment and decision-making process, translating in terms of therapeutic intervention. Some factors may be implicated in determining the individual target and clinical response. Personalized symptom goals and global impression of change are relevant for patients' assessment and decision-making process, translating in terms of therapeutic intervention. Some factors may be implicated in determining the individual target and clinical response. © AlphaMed Press 2018.

  7. [The global impression technic in fixed dentures].

    Science.gov (United States)

    Lamy, M; Mainjot, A

    2001-01-01

    The global impression technique allows to obtain in a single stage the impression of the abutment as well as their neighboring teeth. This technique often requires the placement of one or two retraction cords in the sulcus. The impression technique herein described is the double mix method. This method is based on the use of two elastomers with different viscosities, but from the same group thus allowing a simultaneous polymerization.

  8. Modification of the Clinical Global Impressions (CGI) Scale for use in bipolar illness (BP): the CGI-BP.

    Science.gov (United States)

    Spearing, M K; Post, R M; Leverich, G S; Brandt, D; Nolen, W

    1997-12-05

    The Clinical Global Impressions Scale (CGI) was modified specifically for use in assessing global illness severity and change in patients with bipolar disorder. Criticisms of the original CGI were addressed by correcting inconsistencies in scaling, identifying time frames for comparison, clarifying definitions of illness severity and change, and separating out assessment of treatment side effects from illness improvement during treatment. A Detailed User's Guide was developed to train clinicians in the use of the new CGI-Bipolar Version (CGI-BP) for rating severity of manic and depressive episodes and the degree of change from the immediately preceding phase and from the worst phase of illness. The revised scale and manual provide a focused set of instructions to facilitate the reliability of these ratings of mania, depression, and overall bipolar illness during treatment of an acute episode or in longer-term illness prophylaxis. Interrater reliability of the scale was demonstrated in preliminary analyses. Thus, the modified CGI-BP is anticipated to be more useful than the original CGI in studies of bipolar disorder.

  9. Is there a correlation between physicians' clinical impressions and patients' perceptions of change? Use of the Perceived Change Scale with inpatients with mental disorders

    Directory of Open Access Journals (Sweden)

    Gabriela Pavan

    Full Text Available Abstract Introduction: Assessment of the results of treatment for mental disorders becomes more complete when the patient's perspective is incorporated. Here, we aimed to evaluate the psychometric properties and application of the Perceived Change Scale - Patient version (PCS-P in a sample of inpatients with mental disorders. Methods: One hundred and ninety-one psychiatric inpatients answered the PCS-P and the Patients' Satisfaction with Mental Health Services Scale (SATIS and were evaluated in terms of clinical and sociodemographic data. An exploratory factor analysis (EFA was performed and internal consistency was calculated. The clinical impressions of the patient, family, and physician were correlated with the patient's perception of change. Results: The EFA indicated a psychometrically suitable four-factor solution. The PCS-P exhibited a coherent relationship with SATIS and had a Cronbach's alpha value of 0.856. No correlations were found between the physician's clinical global impression of improvement and the patient's perception of change, although a moderate positive correlation was found between the patients' clinical global impression of improvement and the change perceived by the patient. Conclusions: The PCS-P exhibited adequate psychometric proprieties in a sample of inpatients with mental disorders. The patient's perception of change is an important dimension for evaluation of outcomes in the treatment of mental disorders and differs from the physician's clinical impression of improvement. Evaluation of positive and negative perceptions of the various dimensions of the patient's life enables more precise consideration of the patient's priorities and interests.

  10. Evaluation Apprehension and Impression Management in Clinical Medical Education.

    Science.gov (United States)

    McGaghie, William C

    2018-05-01

    Historically, clinical medical education has relied on subjective evaluations of students and residents to judge their clinical competence. The uncertainty associated with these subjective clinical evaluations has produced evaluation apprehension among learners and attempts to manage one's professional persona (impression management) among peers and supervisors. Such behavior has been documented from antiquity through the Middle Ages to the present, including in two new qualitative studies in this issue of Academic Medicine on the social psychology of clinical medical education. New approaches to medical education, including competency-based education, mastery learning, and assessment methods that unite evaluation and education, are slowly changing the culture of clinical medical education. The author of this Invited Commentary argues that this shift will bring greater transparency and accountability to clinical medical education and gradually reduce evaluation apprehension and the impression management motives it produces.

  11. Do first impressions count? Frailty judged by initial clinical impression predicts medium-term mortality in vascular surgical patients.

    Science.gov (United States)

    O'Neill, B R; Batterham, A M; Hollingsworth, A C; Durrand, J W; Danjoux, G R

    2016-06-01

    Recognising frailty during pre-operative assessment is important. Frail patients experience higher mortality rates and are less likely to return to baseline functional status following the physiological insult of surgery. We evaluated the association between an initial clinical impression of frailty and all-cause mortality in 392 patients attending our vascular pre-operative assessment clinic. Prevalence of frailty assessed by the initial clinical impression was 30.6% (95% CI 26.0-35.2%). There were 133 deaths in 392 patients over a median follow-up period of 4 years. Using Cox regression, adjusted for age, sex, revised cardiac risk index and surgery (yes/no), the hazard ratio for mortality for frail vs. not-frail was 2.14 (95% CI 1.51-3.05). The time to 20% mortality was 16 months in the frail group and 33 months in the not-frail group. The initial clinical impression is a useful screening tool to identify frail patients in pre-operative assessment. © 2016 The Association of Anaesthetists of Great Britain and Ireland.

  12. Clinical global impression of cognition in schizophrenia (CGI-CogS): reliability and validity of a co-primary measure of cognition.

    Science.gov (United States)

    Ventura, Joseph; Cienfuegos, Angel; Boxer, Oren; Bilder, Robert

    2008-11-01

    Cognitive deficits are core features of schizophrenia that have been associated reliably with functional outcomes and now are a focus of treatment research. New rating scales are needed to complement current psychometric testing procedures, both to enable wider clinical use, and to serve as endpoints in clinical trials. Subjects were 35 schizophrenia patient-and-caregiver pairs recruited from the UCLA and West Los Angeles VA Outpatient Psychiatry Departments. Participants were assessed with the Clinical Global Impression of Cognition in Schizophrenia (CGI-CogS), an interview-based rating scale of cognitive functioning, on 3 occasions (baseline, 1 month, and 3 months). A computerized neurocognitive battery (Cogtest), an assessment of functioning, and symptom measures were administered at two occasions (baseline and one month). The CGI-CogS ratings generally showed a high level of internal consistency (Cronbach's alpha=.69 to .96), adequate levels of inter-rater reliability (ICC's=.71 to .80), and high test-retest stability (ICC's=.92 to .95). Correlations of caregiver and rater global (but not "patient only rating") CGI-CogS ratings with neurocognitive performance were in the moderate range (r's=-.27 to -.48), while most of the correlations with functional outcome were moderate to high (r's=-.41 to -.72). In fact, the CGI-CogS ratings were significantly more correlated with Social Functioning than were objective neurocognitive test scores (p=.02) and showed a trend in the same direction for predicting Instrumental Functioning (p=.06). We found moderate correlations between CGI-CogS global ratings and PANSS positive (r's=.36 to .49) and SANS negative symptoms (r=.41 to .61), but not with BPRS depression (r's=.11 to .13). An interview-based measure of cognition demonstrated high internal consistency, good inter-rater reliability, and high test-retest reliability. Caregiver ratings appear to add important clinical information over patient-only ratings. The CGI

  13. Validity of the patient-reported Clinical Global Impression of Change as a measure of treatment response in men with premature ejaculation.

    Science.gov (United States)

    Althof, Stanley E; Brock, Gerald B; Rosen, Raymond C; Rowland, David L; Aquilina, Joseph W; Rothman, Margaret; Tesfaye, Fisseha; Bull, Scott

    2010-06-01

    The Clinical Global Impression of Change (CGIC) measures have high utility in clinical practice. However, it is unknown whether the CGIC is valued for assessing premature ejaculation (PE) symptoms and/or the relationship between CGIC and other validated PE patient-reported measures. The study aims to assess the validity of the patient-reported CGIC measure in men with PE and to examine the relationship between CGIC ratings and assessments of control, satisfaction, personal distress, and interpersonal difficulty. Data from a randomized, double-blind, 24-week phase 3 trial in 1,162 men with PE who received dapoxetine (30 mg or 60 mg) or placebo on demand provided the basis for the analysis. Patients were ≥18 years, in a stable monogamous relationship for ≥6 months, met the Diagnostic and Statistical Manual of Mental Disorders-Fourth Edition-Text Revision criteria for PE for ≥6 months, and had an intravaginal ejaculatory latency time (IELT) ≤2 minutes in ≥75% of intercourse episodes. The CGIC asked patients to rate improvement or worsening of their PE compared with the start of the study using a 7-point response scale; other patient-reported measures were control over ejaculation, satisfaction with sexual intercourse, interpersonal difficulty, and personal distress related to ejaculation. Stopwatch-measured IELT was recorded. Associations between CGIC and change in other measures at study end point were assessed. The magnitude of IELT increased for each category of improvement on the CGIC: 1.63, 4.03, and 7.15 minutes for slightly better, better, and much better, respectively. Higher CGIC ratings were correlated with greater improvement in control (r = 0.73), satisfaction (r = 0.62), greater reduction in distress (r = -0.52), and interpersonal difficulty (r = -0.39). Total variance accounted for was 57.4%: control (48.7%), satisfaction (4.5%), IELT (2.8%), and distress (1.15%). The analyses support the validity of the CGIC measure in men with PE. The CGIC

  14. Cranial Paget's disease - clinical case of symptomatic secondary basilar impression

    International Nuclear Information System (INIS)

    Gagov, E.; Gabrovsky, N.; Gabrovsky, S.

    2010-01-01

    A clinical case of 52 years old woman with history of periodic headaches for many years. The headache became more intensive and constant during the last 4-6 months. Instability by walking and stagger occurred as well as weakness in all 4 extremities, difficult swallowing and speech changes. Bulbar, quadripyramidal and archicerebellar symptoms were in hand. Pagets disease was ascertained engaging the skull with secondary basilar impression and compression of the cerebellum and the brain-stem leading to the above described clinical signs. Decompressive median suboccipital craniectomy was performed with laminectomy of C1. Occipital squama was thickened and highly vascularized.. Secondary basilar impression could occur in cranial Pagets disease with clinical symptoms resulting from the compression of the cerebellum and the brain-stem

  15. Miniaturization and globalization of clinical laboratory activities.

    Science.gov (United States)

    Melo, Murilo R; Clark, Samantha; Barrio, Daniel

    2011-04-01

    Clinical laboratories provide an invaluable service to millions of people around the world in the form of quality diagnostic care. Within the clinical laboratory industry the impetus for change has come from technological development (miniaturization, nanotechnology, and their collective effect on point-of-care testing; POCT) and the increasingly global nature of laboratory services. Potential technological gains in POCT include: the development of bio-sensors, microarrays, genetics and proteomics testing, and enhanced web connectivity. In globalization, prospective opportunities lie in: medical tourism, the migration of healthcare workers, cross-border delivery of testing, and the establishment of accredited laboratories in previously unexplored markets. Accompanying these impressive opportunities are equally imposing challenges. Difficulty transitioning from research to clinical use, poor infrastructure in developing countries, cultural differences and national barriers to global trade are only a few examples. Dealing with the issues presented by globalization and the impact of developing technology on POCT, and on the clinical laboratory services industry in general, will be a daunting task. Despite such concerns, with appropriate countermeasures it will be possible to address the challenges posed. Future laboratory success will be largely dependent on one's ability to adapt in this perpetually shifting landscape.

  16. Clinical evaluation of the efficacy of removing microorganisms to disinfect patient-derived dental impressions.

    Science.gov (United States)

    Egusa, Hiroshi; Watamoto, Takao; Matsumoto, Takuya; Abe, Keiko; Kobayashi, Munemasa; Akashi, Yoshihiro; Yatani, Hirofumi

    2008-01-01

    Disinfection of dental impressions is an indispensable procedure for the control of cross-contamination; however, there is limited information on the efficacy of disinfection under clinical conditions. The objective of this study was to clinically evaluate the disinfection efficacy of commercially available agents in removing oral pathogens from patient-derived impressions. Impressions from 54 patients were divided into groups and either left undisinfected or underwent 1 of 5 disinfection treatments: (1) 2% glutaraldehyde (GA), (2) 1% sodium hypochlorite (SH), (3) 0.25% benzalkonium chloride (BC), (4) 1 ppm ozonated water (OW), or (5) the Hygojet/MD520 system (HJ). An impression culture technique using a brain heart infusion agar medium was used to visualize the microbial contamination on the surface of the impression cultures. The persistent presence of oral pathogens on the impression cultures was examined using selective isolation agar plates. The isolation frequencies of streptococci, staphylococci, Candida, methicillin-resistant Staphylococcus aureus, and Pseudomonas aeruginosa species from undisinfected impressions were 100%, 55.6%, 25.9%, 25.9% and 5.6%, respectively. Disinfection with HJ and BC removed the microorganisms with the greatest efficacy, followed by GA, SH, and OW. Potential bacterial contamination could be detected even after disinfection had been performed. Combined use of BC plus GA or SH removed oral pathogens almost completely from dental impressions. This investigation showed that potential contaminants are still present, even after general disinfection procedures. Therefore, either HJ or the combined use of BC with GA or SH is recommended for clinical and laboratory use.

  17. Clinical impression and western aphasia battery classification of aphasia in acute ischemic stroke: Is there a discrepancy?

    Directory of Open Access Journals (Sweden)

    Aju Abraham John

    2017-01-01

    Full Text Available Background: Language disturbance is a common symptom of stroke, a prompt identifier of the event, and can cause devastating cognitive impairments. There are many inconsistencies and discrepancies between the different methods used for its evaluation. The relationship between Western Aphasia Battery (WAB and a simple bedside clinical examination is not clear. Aim: The aim of this study is to determine if bedside clinical impression of aphasia type can reliably predict WAB classification of aphasia and to describe the discrepancies between them. Materials and Methods: Eighty-two consecutive cases of acute ischemic stroke and aphasia were evaluated with bedside aphasia assessment, handedness by Edinburgh Handedness Inventory and WAB scoring was done. Kappa statistics was used to find the overall agreement of clinical impression and WAB. Results: Disagreement was seen predominantly for the nonfluent aphasias when the clinical impression was compared with WAB classification. WAB also had diagnosed three cases as having anomic aphasia using taxonomic classification, but same cases had normal language by aphasia quotient scoring of WAB. There was an overall agreement of 63.4% between patient's bedside clinical impression and WAB classification of aphasia, with a P< 0.001. Conclusion: Clinical impression was fairly reliable, as compared to WAB in assessing the type of aphasia. Clinical impression was appropriate in an acute setting, but WAB was required to quantify the severity of deficit, which may help in accessing prognosis, monitoring progression, and rehabilitation planning. Along with WAB, a bedside clinical impression should be done for all the patients to strengthen the description of aphasic deficit.

  18. Randomized controlled clinical trial on the three-dimensional accuracy of fast-set impression materials.

    Science.gov (United States)

    Rudolph, Heike; Quaas, Sebastian; Haim, Manuela; Preißler, Jörg; Walter, Michael H; Koch, Rainer; Luthardt, Ralph G

    2013-06-01

    The use of fast-setting impression materials with different viscosities for the one-stage impression technique demands precise working times when mixing. We examined the effect of varying working time on impression precision in a randomized clinical trial. Focusing on tooth 46, three impressions were made from each of 96 volunteers, using either a polyether (PE: Impregum Penta H/L DuoSoft Quick, 3 M ESPE) or an addition-curing silicone (AS: Aquasil Ultra LV, Dentsply/DeTrey), one with the manufacturer's recommended working time (used as a reference) and two with altered working times. All stages of the impression-taking were subject to randomization. The three-dimensional precision of the non-standard working time impressions was digitally analyzed compared to the reference impression. Statistical analysis was performed using multivariate models. The mean difference in the position of the lower right first molar (vs. the reference impression) ranged from ±12 μm for PE to +19 and -14 μm for AS. Significantly higher mean values (+62 to -40 μm) were found for AS compared to PE (+21 to -26 μm) in the area of the distal adjacent tooth. Fast-set impression materials offer high precision when used for single tooth restorations as part of a one-stage impression technique, even when the working time (mixing plus application of the light- and heavy-body components) diverges significantly from the manufacturer's recommended protocol. Best accuracy was achieved with machine-mixed heavy-body/light-body polyether. Both materials examined met the clinical requirements regarding precision when the teeth were completely syringed with light material.

  19. Improvdent: Improving dentures for patient benefit. A crossover randomised clinical trial comparing impression materials for complete dentures

    Directory of Open Access Journals (Sweden)

    Gray Janine C

    2012-08-01

    Full Text Available Abstract Background According to the UK Adult Dental Health Survey (2009 15% of adults aged 65–74, 30% aged 75–84 and 47% aged >85 years are edentulous and require complete dentures. Patients’ quality of life and nutrition status are affected by poor dentures. The quality of the dental impression is the most important issue for improving the fit and comfort of new dentures. There is paucity of RCT evidence for which impression material is best for complete dentures construction. This study aims to compare two impression materials for effectiveness and cost effectiveness. Methods/Design IMPROVDENT is a double-blind crossover trial comparing the use of alginate and silicone, two commonly used denture impression materials, in terms of patient preference and cost-effectiveness. Eighty five edentulous patients will be recruited and provided with two sets of dentures, similar in all aspects except for the impression material used (alginate or silicone. Patients will try both sets of dentures for a two-week period, unadjusted, to become accustomed to the feel of the new dentures (habituation period. Patients will then wear each set of dentures for a period of 8 weeks (in random order during which time the dentures will be adjusted for optimum comfort. Finally, patients will be given both sets of dentures for a further two weeks to wear whichever denture they prefer (confirmation period. Patients will be asked about quality of life and to rate dentures on function and comfort at the end of each trial period and asked which set they prefer at the end of the habituation period (unadjusted denture preference and confirmation period (adjusted denture preference. A health economic evaluation will estimate incremental cost-effectiveness ratios of producing dentures from the two materials. A qualitative study will investigate the impact of dentures on behaviour and quality of life. Funding: IMPROVDENT is funded by NIHR RfPB (PB-PG-0408-16300. Discussion

  20. Use of Clinical UV Chamber to Disinfect Dental Impressions: A Comparative Study.

    Science.gov (United States)

    Aeran, Himanshu; Sharma, Sakshi; Kumar, Varun; Gupta, Neelu

    2015-08-01

    Dental impressions are potential source of infection in a prosthodontic practice. Risk of transmission of infection through saliva, blood etc is considered as hazard for both dentist as well as dental auxiliary staff. A number of methods are currently employed for disinfecting the impressions which are technique sensitive and time consuming. This study focuses on disinfecting impression using dental UV chamber which is commonly employed for storing sterilized instruments. The aim of this invitro study was to evaluate the use of clinical UV chamber to disinfect various impression materials at different time intervals and its comparison with 2% glutaraldehyde using standard immersion technique. Total sample size of 180 specimens was taken from three different impression materials. The impressions were made from 30 dentulous subjects. A total of ten impressions were made for each impression material i.e. alginate, addition silicone and polyether impression material. Six punch samples were taken from each impression. Out of 6 punch sample, one was kept as control, second was disinfected by immersing in freshly prepared 2% glutaraldehyde solution for 10 minutes and remaining four were exposed to UV rays for 3 minutes, 6 minutes, 10 minutes and 15 minutes using dental UV chamber. Amount of disinfection achieved was evaluated by counting the colonies over the culture plates with the help of digital colony. The results showed that the mean CFUs for alginate were found to be i.e. 11797.40 ± 5989.73 (mean ± SD). The mean CFUs for addition silicone impression material was found 7095.40 with a standard deviation of 4268.83 and the mean CFUs for polyether impression material was found to be 2168.92 ± 1676 (mean ± SD). For alginate and addition silicone impression material, disinfection was achieved on exposure to UV rays for a period of 10 minutes. However, for polyether impression material 3 minutes of exposure to UV rays was sufficient to cause complete disinfection.

  1. The quality of fixed prosthodontic impressions: An assessment of crown and bridge impressions received at commercial laboratories.

    Science.gov (United States)

    Rau, Clayton T; Olafsson, Vilhelm G; Delgado, Alex J; Ritter, André V; Donovan, Terry E

    2017-09-01

    The authors evaluated and quantified clinically detectable errors commonly seen in impressions sent to commercial laboratories and determined possible relationships between finish line errors and other factors involved. The authors visited 3 large and 1 small commercial dental laboratories over a 12-month period. Three calibrated examiners evaluated the impressions. The examiners evaluated all impressions for errors by using ×2.5 magnification loupes under ambient room lighting without the aid of additional illumination. The authors evaluated 1,157 impressions; 86% of the examined impressions had at least 1 detectable error, and 55% of the noted errors were critical errors pertaining to the finish line. The largest single error categories evaluated were tissue over the finish line (49.09%), lack of unprepared stops in dual-arch impressions (25.63%), pressure of the tray on the soft tissue (25.06%), and void at the finish line (24.38%). The factors blood on the impression (odds ratio, 2.31; P impressions evaluated. The authors noted an increase in errors at the finish line with dual-arch impression techniques and in the presence of blood. Dentists have ethical, moral, and legal obligations bestowed on them by the profession and need to evaluate critically the work they send to laboratories. The authors strongly recommend an improvement in technique and reviewing of all impressions and working casts. Published by Elsevier Inc.

  2. Digitization of simulated clinical dental impressions: virtual three-dimensional analysis of exactness.

    Science.gov (United States)

    Persson, Anna S K; Odén, Agneta; Andersson, Matts; Sandborgh-Englund, Gunilla

    2009-07-01

    To compare the exactness of simulated clinical impressions and stone replicas of crown preparations, using digitization and virtual three-dimensional analysis. Three master dies (mandibular incisor, canine and molar) were prepared for full crowns, mounted in full dental arches in a plane line articulator. Eight impressions were taken using an experimental monophase vinyl polysiloxane-based material. Stone replicas were poured in type IV stone (Vel-Mix Stone; Kerr). The master dies and the stone replicas were digitized in a touch-probe scanner (Procera) Forte; Nobel Biocare AB) and the impressions in a laser scanner (D250, 3Shape A/S), to create virtual models. The resulting point-clouds from the digitization of the master dies were used as CAD-Reference-Models (CRM). Discrepancies between the points in the pointclouds and the corresponding CRM were measured by a matching-software (CopyCAD 6.504 SP2; Delcam Plc). The distribution of the discrepancies was analyzed and depicted on color-difference maps. The discrepancies of the digitized impressions and the stone replicas compared to the CRM were of similar size with a mean+/-SD within 40microm, with the exception of two of the digitized molar impressions. The precision of the digitized impressions and stone replicas did not differ significantly (F=4.2; p=0.053). However, the shape affected the digitization (F=5.4; p=0.013) and the interaction effect of shape and digitization source (impression or stone replica) was pronounced (F=28; pimpressions varied with shape. Both impressions and stone replicas can be digitized repeatedly with a high reliability.

  3. Clinical Fit of Partial Removable Dental Prostheses Based on Alginate or Polyvinyl Siloxane Impressions.

    Science.gov (United States)

    Fokkinga, Wietske A; Witter, Dick J; Bronkhorst, Ewald M; Creugers, Nico H

    The aim of this study was to analyze the clinical fit of metal-frame partial removable dental prostheses (PRDPs) based on custom trays used with alginate or polyvinyl siloxane impression material. Fifth-year students of the Nijmegen Dental School made 25 correct impressions for 23 PRDPs for 21 patients using alginate, and 31 correct impressions for 30 PRDPs for 28 patients using polyvinyl siloxane. Clinical fit of the framework as a whole and of each retainer separately were evaluated by calibrated supervisors during framework try-in before (first evaluation) and after (second evaluation) possible adjustments (score 0 = poor fit, up to score 3 = good fit). Framework fit and fit of the denture base were evaluated at delivery (third evaluation). Finally, postinsertion sessions were evaluated and total number of sessions needed, sore spots, adjustments to the denture base, and reported food-impaction were recorded. No significant differences in clinical fit (of the framework as a whole, for the retainers, or for the denture base) were found between the groups in the three evaluation sessions. Differences were not found for postinsertion sessions with one exception: in the alginate group, four subjects reported food impaction, versus none in the polyvinyl siloxane group. Clinical fit of metal-frame PRDPs based on impressions with custom trays combined with alginate or polyvinyl siloxane was similar.

  4. A clinical report on the use of closed-tray, hex-lock-friction-fit implant impression copings.

    Science.gov (United States)

    Raviv, Eli; Hanna, Jan; Raviv, Roy; Harel-Raviv, Mili

    2014-08-01

    The precision of an impression determines the subsequent accuracy and fit of the final restoration. Therefore, the ultimate search is for the most accurate impression material and the most efficient and least time consuming technique. One of the major debates in implant dentistry has focused on the advantages of the pick-up versus the transfer impression technique. The pick-up technique is widely accepted as the more accurate. However, the conventional transfer technique is simpler and less time consuming. The Hex-Lock-Friction-Fit impression coping (AB Dental Devices) combines the advantages of the transfer impression technique and the pick-up impression technique. In this article we will review the relevant literature, discuss the advantages of this unique implant impression technique, and present some related clinical cases.

  5. Accuracy evaluation of intraoral optical impressions: A clinical study using a reference appliance.

    Science.gov (United States)

    Atieh, Mohammad A; Ritter, André V; Ko, Ching-Chang; Duqum, Ibrahim

    2017-09-01

    Trueness and precision are used to evaluate the accuracy of intraoral optical impressions. Although the in vivo precision of intraoral optical impressions has been reported, in vivo trueness has not been evaluated because of limitations in the available protocols. The purpose of this clinical study was to compare the accuracy (trueness and precision) of optical and conventional impressions by using a novel study design. Five study participants consented and were enrolled. For each participant, optical and conventional (vinylsiloxanether) impressions of a custom-made intraoral Co-Cr alloy reference appliance fitted to the mandibular arch were obtained by 1 operator. Three-dimensional (3D) digital models were created for stone casts obtained from the conventional impression group and for the reference appliances by using a validated high-accuracy reference scanner. For the optical impression group, 3D digital models were obtained directly from the intraoral scans. The total mean trueness of each impression system was calculated by averaging the mean absolute deviations of the impression replicates from their 3D reference model for each participant, followed by averaging the obtained values across all participants. The total mean precision for each impression system was calculated by averaging the mean absolute deviations between all the impression replicas for each participant (10 pairs), followed by averaging the obtained values across all participants. Data were analyzed using repeated measures ANOVA (α=.05), first to assess whether a systematic difference in trueness or precision of replicate impressions could be found among participants and second to assess whether the mean trueness and precision values differed between the 2 impression systems. Statistically significant differences were found between the 2 impression systems for both mean trueness (P=.010) and mean precision (P=.007). Conventional impressions had higher accuracy with a mean trueness of 17.0

  6. [Precision of digital impressions with TRIOS under simulated intraoral impression taking conditions].

    Science.gov (United States)

    Yang, Xin; Sun, Yi-fei; Tian, Lei; Si, Wen-jie; Feng, Hai-lan; Liu, Yi-hong

    2015-02-18

    To evaluate the precision of digital impressions taken under simulated clinical impression taking conditions with TRIOS and to compare with the precision of extraoral digitalizations. Six #14-#17 epoxy resin dentitions with extracted #16 tooth preparations embedded were made. For each artificial dentition, (1)a silicone rubber impression was taken with individual tray, poured with type IV plaster,and digitalized with 3Shape D700 model scanner for 10 times; (2) fastened to a dental simulator, 10 digital impressions for each were taken with 3Shape TRIOS intraoral scanner. To assess the precision, best-fit algorithm and 3D comparison were conducted between repeated scan models pairwise by Geomagic Qualify 12.0, exported as averaged errors (AE) and color-coded diagrams. Non-parametric analysis was performed to compare the precisions of digital impressions and model images. The color-coded diagrams were used to show the deviations distributions. The mean of AE for digital impressions was 7.058 281 μm, which was greater than that of 4.092 363 μm for the model images (Pimpressions were no more than 10 μm, which meant that the consistency between the digital impressions was good. The deviations distribution was uniform in the model images,while nonuniform in the digital impressions with greater deviations lay mainly around the shoulders and interproximal surfaces. Digital impressions with TRIOS are of good precision and up to the clinical standard. Shoulders and interproximal surfaces scanning are more difficult.

  7. The role of nurses' clinical impression in the first assessment of children at the emergency department.

    Science.gov (United States)

    Zachariasse, Joany M; van der Lee, Dominique; Seiger, Nienke; de Vos-Kerkhof, Evelien; Oostenbrink, Rianne; Moll, Henriëtte A

    2017-11-01

    To assess the diagnostic value and determinants of nurses' clinical impression for the recognition of children with a serious illness on presentation to the emergency department (ED). Secondary analysis of a prospective cohort. 6390 consecutive children nurses' clinical impression for the prediction of serious illness, defined by intensive care unit (ICU) and hospital admission. Determinants of nurses' impression that a child appeared ill. Nurses considered a total of 1279 (20.0%) children appearing ill. Sensitivity of nurses' clinical impression for the recognition of patients requiring ICU admission was 0.70 (95% CI 0.62 to 0.76) and specificity was 0.81 (95% CI 0.80 to 0.82). Sensitivity for hospital admission was 0.48 (95% CI 0.45 to 0.51) and specificity was 0.88 (95% CI 0.87 to 0.88). When adjusted for age, gender, triage urgency and abnormal vital signs, nurses' impression remained significantly associated with ICU (OR 4.54; 95% CI 3.09 to 6.66) and hospital admission (OR 4.00; 95% CI 3.40 to 4.69). Ill appearance was positively associated with triage urgency, fever and abnormal vital signs and negatively with self-referral and presentation outside of office hours. The overall clinical impression of experienced nurses at the ED is on its own, not an accurate predictor of serious illness in children, but provides additional information above some well-established and objective predictors of illness severity. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  8. Clinical marginal fit of zirconia crowns and patients' preferences for impression techniques using intraoral digital scanner versus polyvinyl siloxane material.

    Science.gov (United States)

    Sakornwimon, Nawapat; Leevailoj, Chalermpol

    2017-09-01

    The use of digital intraoral scanners is increasing; however, evidence of its precision in making crown impressions clinically remains scarce. Patients should also feel more comfortable with digital impressions, but only a few studies evaluating this subject have been performed. The purpose of this clinical study was to evaluate the marginal fit of monolithic zirconia crowns and patients' preferences for digital impressions versus polyvinyl siloxane (PVS) impressions. Sixteen participants with indications for single molar crowns were included. After crown preparation, digital impressions by intraoral scanner and PVS impressions were made. The participants were asked to complete a 6-item questionnaire with a visual analog scale related to perceptions of each of the following topics: time involved, taste/smell, occlusal registration, size of impression tray/scanner, gag reflex, and overall preference. Computer-aided design and computer-aided manufacturing monolithic zirconia crowns were fabricated from both impressions. The crowns were evaluated intraorally, and a blinded examiner measured the marginal discrepancy of silicone replicas under a stereomicroscope. Intraexaminer reliability was evaluated by calculating the intraclass correlation coefficient. Data for patients' preferences and marginal discrepancies were analyzed using the paired t test (α=.05). Visual analog scale scores for digital impressions were statistically significantly higher than those for PVS impressions in every topic (Pdigital group on all sides (P>.05). No differences were found in the clinical marginal fit of zirconia crowns fabricated from either digital impressions compared with PVS impressions. Furthermore, patients' satisfaction with digital impressions was significantly higher than with conventional impressions. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

  9. Can physician examiners overcome their first impression when examinee performance changes?

    Science.gov (United States)

    Wood, Timothy J; Pugh, Debra; Touchie, Claire; Chan, James; Humphrey-Murto, Susan

    2018-03-20

    There is an increasing focus on factors that influence the variability of rater-based judgments. First impressions are one such factor. First impressions are judgments about people that are made quickly and are based on little information. Under some circumstances, these judgments can be predictive of subsequent decisions. A concern for both examinees and test administrators is whether the relationship remains stable when the performance of the examinee changes. That is, once a first impression is formed, to what degree will an examiner be willing to modify it? The purpose of this study is to determine the degree that first impressions influence final ratings when the performance of examinees changes within the context of an objective structured clinical examination (OSCE). Physician examiners (n = 29) viewed seven videos of examinees (i.e., actors) performing a physical exam on a single OSCE station. They rated the examinees' clinical abilities on a six-point global rating scale after 60 s (first impression or FIGR). They then observed the examinee for the remainder of the station and provided a final global rating (GRS). For three of the videos, the examinees' performance remained consistent throughout the videos. For two videos, examinee performance changed from initially strong to weak and for two videos, performance changed from initially weak to strong. The mean FIGR rating for the Consistent condition (M = 4.80) and the Strong to Weak condition (M = 4.87) were higher compared to their respective GRS ratings (M = 3.93, M = 2.73) with a greater decline for the Strong to Weak condition. The mean FIGR rating for the Weak to Strong condition was lower (3.60) than the corresponding mean GRS (4.81). This pattern of findings suggests that raters were willing to change their judgments based on examinee performance. Future work should explore the impact of making a first impression judgment explicit versus implicit and the role of context on the

  10. A Comparative Evaluation of the Linear Dimensional Accuracy of Four Impression Techniques using Polyether Impression Material

    OpenAIRE

    Manoj, Smita Sara; Cherian, K. P.; Chitre, Vidya; Aras, Meena

    2013-01-01

    There is much discussion in the dental literature regarding the superiority of one impression technique over the other using addition silicone impression material. However, there is inadequate information available on the accuracy of different impression techniques using polyether. The purpose of this study was to assess the linear dimensional accuracy of four impression techniques using polyether on a laboratory model that simulates clinical practice. The impression material used was Impregu...

  11. Clinical Acceptability of the Internal Gap of CAD/CAM PD-AG Crowns Using Intraoral Digital Impressions

    Science.gov (United States)

    Kim, Tae-Gyung; Kim, Sungtae; Lee, Jae-Hoon

    2016-01-01

    The purpose of this study was to compare the internal gap between CAD/CAM palladium-silver crowns and cast gold crowns generated from intraoral digital versus conventional impressions and to determine the clinical acceptability. Nickel-chrome master dies were made from the prepared resin tooth with the conventional impression method (n = 40). For ICC (Intraoral, CAD/CAM) group, 10 intraoral digital impressions were made, and 10 CAD/CAM crowns of a PD-AG (palladium-silver) machinable alloy were generated. For IC (Intraoral, Cast) group, 10 gold crowns were cast from ten intraoral digital impressions. For CCC (Conventional, CAD/CAM) group, 10 CAD/CAM PD-AG crowns were made using the conventional impression method. For CC (Conventional, Cast) group, 10 gold crowns were fabricated from 10 conventional impressions. One hundred magnifications of the internal gaps of each crown were measured at 50 points with an optical microscope and these values were statistically analyzed using a two-way analysis of variance (α = 0.05). The internal gap of the intraoral digital impression group was significantly larger than in the conventional impression group (P 0.05). Within the limitations of this in vitro study, crowns from intraoral digital impressions showed larger internal gap values than crowns from conventional impressions. PMID:28018914

  12. Clinical Acceptability of the Internal Gap of CAD/CAM PD-AG Crowns Using Intraoral Digital Impressions

    Directory of Open Access Journals (Sweden)

    Tae-Gyung Kim

    2016-01-01

    Full Text Available The purpose of this study was to compare the internal gap between CAD/CAM palladium-silver crowns and cast gold crowns generated from intraoral digital versus conventional impressions and to determine the clinical acceptability. Nickel-chrome master dies were made from the prepared resin tooth with the conventional impression method (n=40. For ICC (Intraoral, CAD/CAM group, 10 intraoral digital impressions were made, and 10 CAD/CAM crowns of a PD-AG (palladium-silver machinable alloy were generated. For IC (Intraoral, Cast group, 10 gold crowns were cast from ten intraoral digital impressions. For CCC (Conventional, CAD/CAM group, 10 CAD/CAM PD-AG crowns were made using the conventional impression method. For CC (Conventional, Cast group, 10 gold crowns were fabricated from 10 conventional impressions. One hundred magnifications of the internal gaps of each crown were measured at 50 points with an optical microscope and these values were statistically analyzed using a two-way analysis of variance (α=0.05. The internal gap of the intraoral digital impression group was significantly larger than in the conventional impression group (P0.05. Within the limitations of this in vitro study, crowns from intraoral digital impressions showed larger internal gap values than crowns from conventional impressions.

  13. Validation of the 17-item Hamilton Depression Rating Scale definition of response for adults with major depressive disorder using equipercentile linking to Clinical Global Impression scale ratings: analysis of Pharmacogenomic Research Network Antidepressant Medication Pharmacogenomic Study (PGRN-AMPS) data.

    Science.gov (United States)

    Bobo, William V; Angleró, Gabriela C; Jenkins, Gregory; Hall-Flavin, Daniel K; Weinshilboum, Richard; Biernacka, Joanna M

    2016-05-01

    The study aimed to define thresholds of clinically significant change in 17-item Hamilton Depression Rating Scale (HDRS-17) scores using the Clinical Global Impression-Improvement (CGI-I) Scale as a gold standard. We conducted a secondary analysis of individual patient data from the Pharmacogenomic Research Network Antidepressant Medication Pharmacogenomic Study, an 8-week, single-arm clinical trial of citalopram or escitalopram treatment of adults with major depression. We used equipercentile linking to identify levels of absolute and percent change in HDRS-17 scores that equated with scores on the CGI-I at 4 and 8 weeks. Additional analyses equated changes in the HDRS-7 and Bech-6 scale scores with CGI-I scores. A CGI-I score of 2 (much improved) corresponded to an absolute decrease (improvement) in HDRS-17 total score of 11 points and a percent decrease of 50-57%, from baseline values. Similar results were observed for percent change in HDRS-7 and Bech-6 scores. Larger absolute (but not percent) decreases in HDRS-17 scores equated with CGI-I scores of 2 in persons with higher baseline depression severity. Our results support the consensus definition of response based on HDRS-17 scores (>50% decrease from baseline). A similar definition of response may apply to the HDRS-7 and Bech-6. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  14. Digital Versus Conventional Impressions in Fixed Prosthodontics: A Review.

    Science.gov (United States)

    Ahlholm, Pekka; Sipilä, Kirsi; Vallittu, Pekka; Jakonen, Minna; Kotiranta, Ulla

    2018-01-01

    To conduct a systematic review to evaluate the evidence of possible benefits and accuracy of digital impression techniques vs. conventional impression techniques. Reports of digital impression techniques versus conventional impression techniques were systematically searched for in the following databases: Cochrane Central Register of Controlled Trials, PubMed, and Web of Science. A combination of controlled vocabulary, free-text words, and well-defined inclusion and exclusion criteria guided the search. Digital impression accuracy is at the same level as conventional impression methods in fabrication of crowns and short fixed dental prostheses (FDPs). For fabrication of implant-supported crowns and FDPs, digital impression accuracy is clinically acceptable. In full-arch impressions, conventional impression methods resulted in better accuracy compared to digital impressions. Digital impression techniques are a clinically acceptable alternative to conventional impression methods in fabrication of crowns and short FDPs. For fabrication of implant-supported crowns and FDPs, digital impression systems also result in clinically acceptable fit. Digital impression techniques are faster and can shorten the operation time. Based on this study, the conventional impression technique is still recommended for full-arch impressions. © 2016 by the American College of Prosthodontists.

  15. Clinical impression and ascites appearance do not rule out bacterial peritonitis.

    Science.gov (United States)

    Chinnock, Brian; Hendey, Gregory W; Minnigan, Hal; Butler, Jack; Afarian, Hagop

    2013-05-01

    Previous research has demonstrated that physician clinical suspicion, determined without assessing fluid appearance, is not adequate to rule out spontaneous bacterial peritonitis (SBP) without fluid testing. To determine the sensitivity of physician clinical suspicion, including a bedside assessment of fluid appearance, in the detection of SBP in Emergency Department (ED) patients undergoing paracentesis. We conducted a prospective, observational study of ED patients with ascites undergoing paracentesis at three academic facilities. The enrolling physician recorded the clinical suspicion of SBP ("none," "low," "moderate," or "high"), and ascites appearance ("clear," "hazy," "cloudy," or "bloody"). SBP was defined as an absolute neutrophil count ≥ 250 cells/mm(3), or culture pathogen growth. We defined "clear" ascites fluid as negative for SBP, and "hazy," "cloudy," or "bloody" as positive. A physician clinical suspicion of "none" or "low" was considered negative for SBP, and an assessment of "moderate" or "high" was considered positive. The primary outcome measure was sensitivity of physician clinical impression and ascites appearance for SBP. There were 348 cases enrolled, with SBP diagnosed in 43 (12%). Physician clinical suspicion had a sensitivity of 42% (95% confidence interval [CI] 29-55%) for the detection of SBP. Fluid appearance had a sensitivity of 72% (95% CI 58-83%). Physician clinical impression, which included an assessment of fluid appearance, had poor sensitivity for the detection of SBP and cannot be used to exclude the diagnosis. Routine laboratory fluid analysis is indicated after ED paracentesis, even in patients considered to have a low degree of suspicion for SBP. Copyright © 2013 Elsevier Inc. All rights reserved.

  16. Use of digital impression systems with intraoral scanners for fabricating restorations and fixed dental prostheses.

    Science.gov (United States)

    Takeuchi, Yoshimasa; Koizumi, Hiroyasu; Furuchi, Mika; Sato, Yohei; Ohkubo, Chikahiro; Matsumura, Hideo

    2018-01-01

    Accurate impressions are essential in fabri-cating dental restorations and fixed dental prostheses. During the last decade, digital impression systems have improved substantially. This review discusses the accuracy of digital impression systems for fabrication of dental restorations and fixed dental prostheses. A literature search in PubMed was performed for the period from July 2010 through June 2017. The search keywords were Cerec, digital impression, direct digitalization, indirect digitalization, and intraoral scanner. Only relevant studies are summarized and discussed in this review. In general, the latest systems have considerably reduced the time required for impression making, and the accuracy and marginal fit of digital impression systems have recently improved. Restorations and fixed dental prostheses fabricated with currently available digital impression systems and intraoral scanners exhibit clinically acceptable ranges of marginal gap in both direct and indirect procedures.

  17. A clinical report on the use of closed tray, hex-lock-friction-fit implant impression copings.

    Science.gov (United States)

    Raviv, Eli; Hana, Jan; Raviv, Roy; Harel-Raviv, Mili

    2012-04-17

    Abstract AbstractThe precision of an impression determines the subsequent accuracy and fit of thefinal restoration. Therefore, the ultimate search is for the most accurate impressionmaterial and technique that is also the most efficient and least time consuming. One ofthe major debates in implant dentistry has been between the pick up versus the transferimpression technique. The pick up technique is widely accepted as the more accurate.However, the conventional transfer technique is simpler and less time consuming. TheHex-Lock-Friction-Fit impression coping (AB Dental Devices®) combines theadvantages of both the transfer impression technique and the pick up impressiontechnique. In this article we will review the relevant literature, discuss the advantages ofthis unique implant impression technique and present some related clinical cases.

  18. Clinical improvement in patients with borderline personality disorder after treatment with repetitive transcranial magnetic stimulation: preliminary results.

    Science.gov (United States)

    Reyes-López, Julian; Ricardo-Garcell, Josefina; Armas-Castañeda, Gabriela; García-Anaya, María; Arango-De Montis, Iván; González-Olvera, Jorge J; Pellicer, Francisco

    2018-01-01

    Current treatment of borderline personality disorder (BPD) consists of psychotherapy and pharmacological interventions. However, the use of repetitive transcranial magnetic stimulation (rTMS) could be beneficial to improve some BPD symptoms. The objective of this study was to evaluate clinical improvement in patients with BPD after application of rTMS over the right or left dorsolateral prefrontal cortex (DLPFC). Twenty-nine patients with BPD from the National Institute of Psychiatry, Mexico, were randomized in two groups to receive 15 sessions of rTMS applied over the right (1 Hz, n=15) or left (5 Hz, n=14) DLPFC. Improvement was measured by the Clinical Global Impression Scale for BPD (CGI-BPD), Borderline Evaluation of Severity Over Time (BEST), Beck Depression Inventory (BDI), Hamilton Anxiety Rating Scale (HAM-A), and Barratt Impulsiveness Scale (BIS). Intragroup comparison showed significant (p < 0.05) reductions in every psychopathologic domain of the CGI-BPD and in the total scores of all scales in both groups. Both protocols produced global improvement in severity and symptoms of BPD, particularly in impulsiveness, affective instability, and anger. Further studies are warranted to explore the therapeutic effect of rTMS in BPD. NCT02273674

  19. The Clinical Impression of Severity Index for Parkinson's Disease: international validation study.

    Science.gov (United States)

    Martínez-Martín, Pablo; Rodríguez-Blázquez, Carmen; Forjaz, Maria João; de Pedro, Jesús

    2009-01-30

    This study sought to provide further information about the psychometric properties of the Clinical Impression of Severity Index for Parkinson's Disease (CISI-PD), in a large, international, cross-culturally diverse sample. Six hundred and fourteen patients with PD participated in the study. Apart from the CISI-PD, assessments were based on Hoehn & Yahr (HY) staging, the Scales for Outcomes in PD-Motor (SCOPA-M), -Cognition (SCOPA-COG) and -Psychosocial (SCOPA-PS), the Cumulative Illness Rating Scale-Geriatrics, and the Hospital Anxiety and Depression Scale. The total CISI-PD score displayed no floor or ceiling effects. Internal consistency was 0.81, the test-retest intraclass correlation coefficient was 0.84, and item homogeneity was 0.52. Exploratory and confirmatory factor analysis (CFI = 0.99, RMSEA = 0.07) confirmed CISI-PD's unifactorial structure. The CISI-PD showed adequate convergent validity with SCOPA-COG and SCOPA-M (r(S) = 0.46-0.85, respectively) and discriminative validity for HY stages and disease duration (P validation study, thus showing that the CISI-PD is a valid instrument to measure clinical impression of severity in PD. Its simplicity and easy application make it an attractive and useful tool for clinical practice and research.

  20. Comparative Evaluation of the Antimicrobial Efficacy of Three Immersion Chemical Disinfectants on Clinically Derived Poly(Vinyl Siloxane) Impressions.

    Science.gov (United States)

    Jeyapalan, Vidhya; Krishnan, Chitra Shankar; Ramasubramanian, Hariharan; Sampathkumar, Jayakrishnakumar; Azhagarasan, N S; Krishnan, Madhusudan

    2016-07-06

    To comparatively evaluate the antimicrobial efficacy of freshly prepared electrolyzed oxidizing water (EOW) with that of 2.4% glutaraldehyde (GA) and 1% sodium hypochlorite (SH) on clinically derived poly vinyl siloxane (PVS) impressions. Four clinically derived PVS impressions each were obtained from 10 subjects. One impression from each subject was randomly kept as control (group I), without disinfection. The remaining three impressions were randomly disinfected by immersion in either 2.4% GA (group II), 1% SH (group III), or freshly prepared EOW (group IV). The samples were subjected to microbial culture individually on brain heart infusion (BHI) agar medium. The organisms isolated were confirmed by visual examination and gram staining. Mean colony forming units (CFU) were counted, log 10 reduction obtained and compared. Data were statistically analyzed using one-way ANOVA, followed by multiple comparisons using Tukey-HSD post hoc tests (p < 0.05). Streptococci, Staphylococci, Pseudomonas, Candida, Proteus, Klebsiella, and E. coli were isolated from all impressions including the controls, except those disinfected by EOW. All three disinfectants showed significant reduction in CFU and log 10 reduction values as compared to the controls. EOW showed significantly higher reduction in log 10 values compared to GA and SH, whereas GA and SH showed similar reductions. EOW, GA, and SH showed kill rates of 100%, 99.60%, and 99.82%, respectively. EOW showed significant antimicrobial efficacy as evidenced by reduction in log 10 values when used as an immersion disinfectant for PVS impressions when compared with the results obtained using GA and SH. These results need further investigation. EOW shows high antimicrobial efficacy when used as an immersion disinfectant as compared to GA and SH for clinically derived PVS impressions. © 2016 by the American College of Prosthodontists.

  1. Looking beyond the face: a training to improve perceivers' impressions of people with facial paralysis.

    Science.gov (United States)

    Bogart, Kathleen R; Tickle-Degnen, Linda

    2015-02-01

    Healthcare providers and lay people alike tend to form inaccurate first impressions of people with facial movement disorders such as facial paralysis (FP) because of the natural tendency to base impressions on the face. This study tested the effectiveness of the first interpersonal sensitivity training for FP. Undergraduate participants were randomly assigned to one of two training conditions or an untrained control. Education raised awareness about FP symptoms and experiences and instructed participants to form their impressions based on cues from the body and voice rather than the face. Education+feedback added feedback about the correctness of participants' judgments. Subsequently, participants watched 30s video clips of people with FP and rated their extraversion. Participants' bias and accuracy in the two training conditions did not significantly differ, but they were significantly less biased than controls. Training did not improve the more challenging task of accurately detecting individual differences in extraversion. Educating people improves bias, but not accuracy, of impressions of people with FP. Information from the education condition could be delivered in a pamphlet to those likely to interact with this population such as healthcare providers and educators. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  2. Clinical and impression cytology findings of amniotic membrane and oral mucosal membrane transplantation for the management of socket contracture.

    Science.gov (United States)

    Kurtul, Bengi Ece; Erdener, Ugur; Mocan, Mehmet Cem; Irkec, Murat; Orhan, Mehmet

    2014-01-01

    To investigate and compare the cytopathological and clinical effects of amniotic membrane transplantation (AMT) and oral mucosal membrane transplantation (OMMT) in socket contraction. Twelve patients who could not be fitted with ocular prosthesis due to socket contracture were included in this study. Seven patients underwent AMT and 5 patients underwent OMMT. Thirteen patients who had healthy sockets were included as control group. Depth of inferior fornix, degree of inflammation, extent of the socket contracture and socket volume were measured in the preoperative period and at sixth and twelfth weeks postoperatively. Impression cytology of conjunctival fornices and tear transforming growth factor beta-1 (TGFβ1) levels were determined. In the AMT group, socket volume and lower fornix depth values were significantly higher (P=0.030 and P=0.004 respectively) and inflammation levels and impression cytology stages (P=0.037 and P=0.022 respectively) were significantly lower in postoperative period compared to preoperative period. In the OMMT group, no statistical differences were found in terms of clinical parameters, inflammation levels and impression cytology stages of preoperative versus postoperative values. Preoperative tear TGFβ1 levels were higher in AMT and OMMT groups compared to the control group (25.5 ng/mL, 26.3 ng/mL and 21.7 ng/mL respectively). Decreased tear TGFβ1 levels were observed in both the AMT and OMMT groups postoperatively (median decrease value=2.1 ng/mL and 2.7 ng/mL respectively). AMT is associated with postoperative improvement in inferior fornix depth, socket volume, inflammation and impression cytology levels and may be a more proper alternative method than OMMT in the management of socket contracture.

  3. Single Visit Feeding Appliance for 1-day-old Neonate with Cleft Palate Using Safe Dental Putty-Gauze Hybrid Impression Technique for Maxillary Impression.

    Science.gov (United States)

    Rathee, Manu

    2015-01-01

    Cleft lip and palate is one of the most common craniofacial anomalies of humans. Intraoral impression making is the first clinical step in the fabrication of feeding appliance for infants with oro-nasal communication. It is difficult to control the flow of the impression material in the cleft area and undercuts in a child patient. This clinical report presents a simple and safe impression technique for maxillary impression making in neonates and infants with cleft palate. A gauze piece was used to confine the impression material during functional movements of sucking while impression making in an awake child to avoid the risk of aspiration or swallowing.

  4. Modification of First Impression Formation and "Personality" by Manipulating Outer Appearance.

    Science.gov (United States)

    Hüttner, Susanne-Marie; Linden, Michael

    2017-01-01

    Global impression is the first item in any psychopathological evaluation, as patients often elicit negative responses in other persons by a dysfunctional first impression formation. This can lead to interactional problems and stigmatization. This study tested to what degree the perception of "personality" can be changed by simple manipulations of the outer appearance of a person. A total of 92 persons were given two different photos of the same female, one with hair combed back and the other with "open" curly hair. For each picture they made ratings on the Bipolar MED Rating Scale, which asks for judgements on 23 emotional impressions. The rating on the "two" persons differed significantly for 16 of the 23 items. Curled open hair led to a more open-hearted and trusting impression, while the combed-back hair was perceived as more reserved, earnest, and defiant. Results were independent of age and gender. People come to far-reaching conclusions about the "personality" of other persons (first impression formation) based on the outer appearance. This opens treatment options for improving social interaction and fighting stigma in patients with mental disorders. © 2017 S. Karger AG, Basel.

  5. Physician's first clinical impression of emergency department patients with nonspecific complaints is associated with morbidity and mortality.

    Science.gov (United States)

    Beglinger, Bettina; Rohacek, Martin; Ackermann, Selina; Hertwig, Ralph; Karakoumis-Ilsemann, Julia; Boutellier, Susanne; Geigy, Nicolas; Nickel, Christian; Bingisser, Roland

    2015-02-01

    The association between the physician's first clinical impression of a patient with nonspecific complaints and morbidity and mortality is unknown. The aim was to evaluate the association of the physician's first clinical impression with acute morbidity and mortality. We conducted a prospective observational study with a 30-day follow-up. This study was performed at the emergency departments (EDs) of 1 secondary and 1 tertiary care hospital, from May 2007 to February 2011. The first clinical impression ("looking ill"), expressed on a numerical rating scale from 0 to 100, age, sex, and the Charlson Comorbidity Index (CCI) were evaluated. The association was determined between these variables and acute morbidity and mortality, together with receiver operating characteristics, and validity. Of 217,699 presentations to the ED, a total of 1278 adult nontrauma patients with nonspecific complaints were enrolled by a study team. No patient was lost to follow-up. A total of 84 (6.6%) patients died during follow-up, and 742 (58.0%) patients were classified as suffering from acute morbidity. The variable "looking ill" was significantly associated with mortality and morbidity (per 10 point increase, odds ratio 1.23, 95% confidence interval [CI] 1.12-1.34, P first impression, with or without additional variables such as age, male sex, and CCI, was associated with morbidity and mortality. This might help in the decision to perform further diagnostic tests and to hospitalize ED patients.

  6. Comparison of Adaptation between the Major Connectors Fabricated from Intraoral Digital Impressions and Extraoral Digital Impressions.

    Science.gov (United States)

    Gan, Ning; Ruan, Yaye; Sun, Jian; Xiong, Yaoyang; Jiao, Ting

    2018-01-11

    The objective was to compare the adaptation between the major connectors of removable partial dentures derived from intraoral digital impressions and extraoral digital impressions. Twenty-four volunteers were enrolled. Each volunteer received an intraoral digital impression and one extraoral digital impression digitized from conventional gypsum impression. A software was used to create the major connectors on digital impression datasets. After all the virtual major connectors designed from Group intraoral digital impressions (Group I) and Group extraoral digital impressions (Group E) were directly fabricated by 3D printing technique, the adaptation of the final major connectors in volunteers' mouths were measured. The adaptation ranged from 159.87 to 577.99 μm in Group I while from 120.83 to 536.17 μm in Group E. The adaptation of major connectors in Group I were found better at the midline palatine suture while the adaptation of major connectors in Group E were found better at the two sides of the palatal vault. In both groups, the highest accuracy in adaptation was revealed at the anterior margin of the major connectors. It is feasible to manufacture the major connectors by digital impression and 3D printing technique. Both the adaptation of the two kinds of digital impressions were clinical acceptable.

  7. Single Visit Feeding Appliance for 1-day-old Neonate with Cleft Palate Using Safe Dental Putty-Gauze Hybrid Impression Technique for Maxillary Impression

    OpenAIRE

    Rathee, Manu

    2015-01-01

    Cleft lip and palate is one of the most common craniofacial anomalies of humans. Intraoral impression making is the first clinical step in the fabrication of feeding appliance for infants with oro-nasal communication. It is difficult to control the flow of the impression material in the cleft area and undercuts in a child patient. This clinical report presents a simple and safe impression technique for maxillary impression making in neonates and infants with cleft palate. A gauze piece was us...

  8. Clinical relevance of findings in trials of CBT for depression.

    Science.gov (United States)

    Lepping, P; Whittington, R; Sambhi, R S; Lane, S; Poole, R; Leucht, S; Cuijpers, P; McCabe, R; Waheed, W

    2017-09-01

    Cognitive behavioural therapy (CBT) is beneficial in depression. Symptom scores can be translated into Clinical Global Impression (CGI) scale scores to indicate clinical relevance. We aimed to assess the clinical relevance of findings of randomised controlled trials (RCTs) of CBT in depression. We identified RCTs of CBT that used the Hamilton Rating Scale for Depression (HAMD). HAMD scores were translated into Clinical Global Impression - Change scale (CGI-I) scores to measure clinical relevance. One hundred and seventy datasets from 82 studies were included. The mean percentage HAMD change for treatment arms was 53.66%, and 29.81% for control arms, a statistically significant difference. Combined active therapies showed the biggest improvement on CGI-I score, followed by CBT alone. All active treatments had better than expected HAMD percentage reduction and CGI-I scores. CBT has a clinically relevant effect in depression, with a notional CGI-I score of 2.2, indicating a significant clinical response. The non-specific or placebo effect of being in a psychotherapy trial was a 29% reduction of HAMD. Copyright © 2017. Published by Elsevier Masson SAS.

  9. Management of the flabby ridge using a modified window technique and polyvinylsiloxane impression material

    Directory of Open Access Journals (Sweden)

    Nawaf Labban

    2018-01-01

    Full Text Available Flabby ridge is a common clinical finding affecting the alveolar ridges of the mandibular or maxillary arches. The anterior region of maxilla is the most affected area in edentulous patients. Dentures on flabby ridges have compromised stability, support, and retention unless adequate measures for its management are employed. Methods applied for flabby ridge management, include surgical removal and augmentation, special impression techniques, balanced distribution of occlusal loads and implant therapy. Special impressions often involve window technique for static impression of flabby area, which present multiple challenges. The purpose of this technique report is to present a modified window technique for the impression of anterior maxillary flabby tissues for improved and controlled application of polyvinylsiloxane impression material that are routinely available in dental practice.

  10. Cost-effectiveness of silicone and alginate impressions for complete dentures.

    Science.gov (United States)

    Hulme, C; Yu, G; Browne, C; O'Dwyer, J; Craddock, H; Brown, S; Gray, J; Pavitt, S; Fernandez, C; Godfrey, M; Dukanovic, G; Brunton, P; Hyde, T P

    2014-08-01

    The aim of this study was to assess the cost effectiveness of silicone and alginate impressions for complete dentures. Cost effectiveness analyses were undertaken alongside a UK single centre, double blind, controlled, crossover clinical trial. Taking the perspective of the healthcare sector, effectiveness is measured using the EuroQol (EQ-5D-3L) which provides a single index value for health status that may be combined with time to produce quality adjusted life years (QALYs); and Oral Health Impact Profile (OHIP-EDENT). Incremental cost effectiveness ratios are presented representing the additional cost per one unit gained. Mean cost was higher in the silicone impression group (£388.57 vs. £363.18). Negligible between-group differences were observed in QALY gains; the silicone group had greater mean OHIP-EDENT gains. The additional cost using silicone was £3.41 per change of one point in the OHIP-EDENT. The silicone group was more costly, driven by the cost of materials. Changes in the EQ-5D and QALY gains over time and between arms were not statistically significant. Change in OHIP-EDENT score showed greater improvement in the silicone group and the difference between arms was statistically significant. Given negligible QALY gains and low level of resource use, results must be treated with caution. It is difficult to make robust claims about the comparative cost-effectiveness. Silicone impressions for complete dentures improve patients' quality of life (OHIP-EDENT score). The extra cost of silicone impressions is £30 per patient. Dentists, patients and health care funders need to consider the clinical and financial value of silicone impressions. Different patients, different dentists, different health funders will have individual perceptions and judgements. ISRCTN01528038. NIHR-RfPB grant PB-PG-0408-16300. This article forms part of a project for which the author (TPH) won the Senior Clinical Unilever Hatton Award of the International Assocation for Dental

  11. Clinical Fit of Partial Removable Dental Prostheses Based on Alginate or Polyvinyl Siloxane Impressions.

    NARCIS (Netherlands)

    Fokkinga, W.A.; Witter, D.J.; Bronkhorst, E.M.; Creugers, N.H.J.

    2017-01-01

    PURPOSE: The aim of this study was to analyze the clinical fit of metal-frame partial removable dental prostheses (PRDPs) based on custom trays used with alginate or polyvinyl siloxane impression material. MATERIALS AND METHODS: Fifth-year students of the Nijmegen Dental School made 25 correct

  12. A Clinical Comparative Study of 3-Dimensional Accuracy between Digital and Conventional Implant Impression Techniques.

    Science.gov (United States)

    Alsharbaty, Mohammed Hussein M; Alikhasi, Marzieh; Zarrati, Simindokht; Shamshiri, Ahmed Reza

    2018-02-09

    To evaluate the accuracy of a digital implant impression technique using a TRIOS 3Shape intraoral scanner (IOS) compared to conventional implant impression techniques (pick-up and transfer) in clinical situations. Thirty-six patients who had two implants (Implantium, internal connection) ranging in diameter between 3.8 and 4.8 mm in posterior regions participated in this study after signing a consent form. Thirty-six reference models (RM) were fabricated by attaching two impression copings intraorally, splinted with autopolymerizing acrylic resin, verified by sectioning through the middle of the index, and rejoined again with freshly mixed autopolymerizing acrylic resin pattern (Pattern Resin) with the brush bead method. After that, the splinted assemblies were attached to implant analogs (DANSE) and impressed with type III dental stone (Gypsum Microstone) in standard plastic die lock trays. Thirty-six working casts were fabricated for each conventional impression technique (i.e., pick-up and transfer). Thirty-six digital impressions were made with a TRIOS 3Shape IOS. Eight of the digitally scanned files were damaged; 28 digital scan files were retrieved to STL format. A coordinate-measuring machine (CMM) was used to record linear displacement measurements (x, y, and z-coordinates), interimplant distances, and angular displacements for the RMs and conventionally fabricated working casts. CATIA 3D evaluation software was used to assess the digital STL files for the same variables as the CMM measurements. CMM measurements made on the RMs and conventionally fabricated working casts were compared with 3D software measurements made on the digitally scanned files. Data were statistically analyzed using the generalized estimating equation (GEE) with an exchangeable correlation matrix and linear method, followed by the Bonferroni method for pairwise comparisons (α = 0.05). The results showed significant differences between the pick-up and digital groups in all of the

  13. Accuracy of Digital Impressions and Fitness of Single Crowns Based on Digital Impressions

    Science.gov (United States)

    Yang, Xin; Lv, Pin; Liu, Yihong; Si, Wenjie; Feng, Hailan

    2015-01-01

    In this study, the accuracy (precision and trueness) of digital impressions and the fitness of single crowns manufactured based on digital impressions were evaluated. #14-17 epoxy resin dentitions were made, while full-crown preparations of extracted natural teeth were embedded at #16. (1) To assess precision, deviations among repeated scan models made by intraoral scanner TRIOS and MHT and model scanner D700 and inEos were calculated through best-fit algorithm and three-dimensional (3D) comparison. Root mean square (RMS) and color-coded difference images were offered. (2) To assess trueness, micro computed tomography (micro-CT) was used to get the reference model (REF). Deviations between REF and repeated scan models (from (1)) were calculated. (3) To assess fitness, single crowns were manufactured based on TRIOS, MHT, D700 and inEos scan models. The adhesive gaps were evaluated under stereomicroscope after cross-sectioned. Digital impressions showed lower precision and better trueness. Except for MHT, the means of RMS for precision were lower than 10 μm. Digital impressions showed better internal fitness. Fitness of single crowns based on digital impressions was up to clinical standard. Digital impressions could be an alternative method for single crowns manufacturing. PMID:28793417

  14. Accuracy of Digital Impressions and Fitness of Single Crowns Based on Digital Impressions

    Directory of Open Access Journals (Sweden)

    Xin Yang

    2015-06-01

    Full Text Available In this study, the accuracy (precision and trueness of digital impressions and the fitness of single crowns manufactured based on digital impressions were evaluated. #14-17 epoxy resin dentitions were made, while full-crown preparations of extracted natural teeth were embedded at #16. (1 To assess precision, deviations among repeated scan models made by intraoral scanner TRIOS and MHT and model scanner D700 and inEos were calculated through best-fit algorithm and three-dimensional (3D comparison. Root mean square (RMS and color-coded difference images were offered. (2 To assess trueness, micro computed tomography (micro-CT was used to get the reference model (REF. Deviations between REF and repeated scan models (from (1 were calculated. (3 To assess fitness, single crowns were manufactured based on TRIOS, MHT, D700 and inEos scan models. The adhesive gaps were evaluated under stereomicroscope after cross-sectioned. Digital impressions showed lower precision and better trueness. Except for MHT, the means of RMS for precision were lower than 10 μm. Digital impressions showed better internal fitness. Fitness of single crowns based on digital impressions was up to clinical standard. Digital impressions could be an alternative method for single crowns manufacturing.

  15. Clinical evaluation of all-ceramic crowns fabricated from intraoral digital impressions based on the principle of active wavefront sampling.

    Science.gov (United States)

    Syrek, Andreas; Reich, Gunnar; Ranftl, Dieter; Klein, Christoph; Cerny, Barbara; Brodesser, Jutta

    2010-07-01

    The aim of the present study was to compare the fit of all-ceramic crowns fabricated from intraoral digital impressions with the fit of all-ceramic crowns fabricated from silicone impressions. Twenty patients agreed to take part in the study to receive two Lava crowns each for the same preparation. One crown was fabricated from intraoral scans using the Lava Chairside Oral Scanner (Lava C.O.S.), and the other crown from a two-step silicone impression. Prior to cementation the fit of both crowns was clinically evaluated by two calibrated and blinded examiners; the marginal fit was also scored from replicas. Data from the replica scores were analysed by Anderson-Darling test, Levene's test and Mann-Whitney test. All tests were performed with alpha-level of 0.05. Median marginal gap in the conventional impression group was 71microm (Q1:45microm; Q3:98microm), and in the digital impression group 49microm (Q1:32microm; Q3:65microm). Mann-Whitney test revealed a significant difference between the groups (pdigitally fabricated crowns. 1. Crowns from intraoral scans revealed significantly better marginal fit than crowns from silicone impressions. 2. Marginal discrepancies in both groups were within the limits of clinical acceptability. 3. Crowns from intraoral scans tended to show better interproximal contact area quality. 4. Crowns from both groups performed equally well with regard to occlusion. Copyright 2010 Elsevier Ltd. All rights reserved.

  16. Handling of Polyvinylsiloxane Versus Polyether for Implant Impressions.

    Science.gov (United States)

    Farhan, Daniel; Lauer, Wiebke; Heydecke, Guido; Aarabi, Ghazal; Reissmann, Daniel R

    2016-01-01

    This study compared polyvinylsiloxane with polyether in handling dental impressions. Each participant (N = 39) made four impressions, each a combination of pickup and reseating techniques with polyether or polyvinylsiloxane, of one implant cast representing a specific clinical situation (tooth gaps, limited residual dentition, or edentulous jaw). Handling of impressions was subsequently rated by using a 12-item questionnaire with 100-mm visual analog scales. While mean satisfaction scores were higher for polyvinylsiloxane than for polyether (69.5/63.0, P < .001), differences among subgroups were statistically significant only for pickup technique, limited residual dentition, and edentulous jaw. Implant impressions made with polyvinylsiloxane using a pickup technique seem to be the best option for most clinical situations.

  17. Multidimensional Patient Impression of Change Following Interdisciplinary Pain Management.

    Science.gov (United States)

    Gagnon, Christine M; Scholten, Paul; Atchison, James

    2018-04-20

    To assess patient impression of change following interdisciplinary pain management utilizing a newly developed Multidimensional Patient Impression of Change (MPIC) questionnaire. A heterogeneous group of chronic pain patients (N = 601) participated in an interdisciplinary treatment program. Programs included individual and group therapies (pain psychology, physical therapy, occupational therapy, relaxation training/biofeedback, aerobic conditioning, patient education and medical management). Patients completed measures of pain, mood, coping, physical functioning and pain acceptance both prior to and at completion of their treatment programs. The newly developed MPIC is an expansion to the Patient Global Impression of Change (PGIC) including seven additional domains (Pain, Mood, Sleep, Physical Functioning, Cope with Pain, Manage Pain Flare-ups, and Medication Effectiveness). The MPIC was administered to the patients post-treatment. There were statistically significant pre- to post-treatment improvements found on all outcome measures. The majority of these improvements were significantly correlated with all domains of the MPIC. The original PGIC item was significantly associated with all of the new MPIC domains and the domains were significantly associated with each other; but there were variations in the distribution of responses highlighting variation of perceived improvements among the domains. Our results support the use of the MPIC as a quick and easy post-treatment assessment screening tool. Future research is needed to examine relevant correlates to Medication Effectiveness. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

  18. Lithium monotherapy associated clinical improvement effects on amygdala-ventromedial prefrontal cortex resting state connectivity in bipolar disorder.

    Science.gov (United States)

    Altinay, Murat; Karne, Harish; Anand, Amit

    2018-01-01

    This study, for the first time, investigated lithium monotherapy associated effects on amygdala- ventromedial prefrontal cortex (vMPFC) resting-state functional connectivity and correlation with clinical improvement in bipolar disorder (BP) METHODS: Thirty-six medication-free subjects - 24 BP (12 hypomanic BPM) and 12 depressed (BPD)) and 12 closely matched healthy controls (HC), were included. BP subjects were treated with lithium and scanned at baseline, after 2 weeks and 8 weeks. HC were scanned at same time points but were not treated. The effect of lithium was studied for the BP group as a whole using two way (group, time) ANOVA while regressing out effects of state. Next, correlation between changes in amygdala-vMPFC resting-state connectivity and clinical global impression (CGI) of severity and improvement scale scores for overall BP illness was calculated. An exploratory analysis was also conducted for the BPD and BPM subgroups separately. Group by time interaction revealed that lithium monotherapy in patients was associated with increase in amygdala-medial OFC connectivity after 8 weeks of treatment (p = 0.05 (cluster-wise corrected)) compared to repeat testing in healthy controls. Increased amygdala-vMPFC connectivity correlated with clinical improvement at week 2 and week 8 as measured with the CGI-I scale. The results pertain to open-label treatment and do not account for non-treatment related improvement effects. Only functional connectivity was measured which does not give information regarding one regions effect on the other. Lithium monotherapy in BP is associated with modulation of amygdala-vMPFC connectivity which correlates with state-independent global clinical improvement. Copyright © 2017. Published by Elsevier B.V.

  19. A rare allergy to a polyether dental impression material.

    Science.gov (United States)

    Mittermüller, Pauline; Szeimies, Rolf-Markus; Landthaler, Michael; Schmalz, Gottfried

    2012-08-01

    Polyether impression materials have been used in dentistry for more than 40 years. Allergic reactions to these materials such as reported in the 1970s ceased after replacement of a catalyst. Very recently, however, patients have started to report symptoms that suggest a new allergic reaction from polyether impression materials. Here, we report on the results of allergy testing with polyether impression materials as well as with its components. Eight patients with clinical symptoms of a contact allergy (swelling, redness or blisters) after exposure to a polyether impression material were subjected to patch tests, two of them additionally to a prick test. A further patient with atypical symptoms of an allergy (nausea and vomiting after contact with a polyether impression material in the oral cavity) but with a history of other allergic reaction was also patch tested. The prick tests showed no immediate reactions in the two patients tested. In the patch tests, all eight patients with typical clinical symptoms showed positive reactions to the mixed polyether impression materials, to the base paste or to a base paste component. The patient with the atypical clinical symptoms did not show any positive patch test reactions. Polyether impression materials may evoke type IV allergic reactions. The causative agent was a component of the base paste. In consideration of the widespread use of this impression material (millions of applications per year) and in comparison to the number of adverse reactions from other dental materials, the number of such allergic reactions is very low. In very scarce cases, positive allergic reactions to polyether impression materials are possible.

  20. Clinical evaluation comparing the fit of all-ceramic crowns obtained from silicone and digital intraoral impressions based on wavefront sampling technology.

    Science.gov (United States)

    Pradíes, Guillermo; Zarauz, Cristina; Valverde, Arelhys; Ferreiroa, Alberto; Martínez-Rus, Francisco

    2015-02-01

    The aim of this study was to compare the fit of ceramic crowns fabricated from conventional silicone impressions with the fit of ceramic crowns fabricated from intraoral digital impressions. Twenty-five participants with 30 posterior teeth with a prosthetic demand were selected for the study. Two crowns were made for each preparation. One crown was fabricated from an intraoral digital impression system (IDI group) and the other crown was fabricated from a conventional two-step silicone impression (CI group). To replicate the interface between the crown and the preparation, each crown was cemented on its corresponding clinical preparation with ultra-flow silicone. Each crown was embedded in acrylic resin to stabilise the registered interface and then cut in 2mm thick slices in a buco-lingual orientation. The internal gap was determined as the vertical distance from the internal surface of the crown to the prepared tooth surface at four points (marginal gap, axial gap, crest gap, and occlusal fossa gap) using stereomicroscopy with a magnification of 40×. Data was analysed by using Wilcoxon signed rank test (α=0.05). Internal adaptation values were significantly affected by the impression technique (p=0.001). Mean marginal gap was 76.33 ± 65.32 μm for the crowns of the IDI group and 91.46 ± 72.17 μm for the CI group. All-ceramic crowns fabricated from intraoral digital impressions with wavefront sampling technology demonstrated better internal fit than crowns manufactured from silicone impressions. Impressions obtained from an intraoral digital scanner based on wavefront sampling technology can be used for manufacturing ceramic crowns in the normal clinical practice with better results than conventional impressions with elastomers. Copyright © 2014 Elsevier Ltd. All rights reserved.

  1. Botulinum toxin a can positively impact first impression.

    Science.gov (United States)

    Dayan, Steven H; Lieberman, Elliot D; Thakkar, Nirav N; Larimer, Karen A; Anstead, Amy

    2008-06-01

    BACKGROUND First impression is influenced by facial appearance and improved by cosmetic surgery. OBJECTIVE We wanted to determine if treatment with botulinum toxin A (BTxnA) would improve first impression. MATERIALS AND METHODS Women received BTxnA in the forehead. Photos were taken prior to, and 1 week after, final BTxnA injection in smiling and relaxed poses. Photos were divided into books with each subject represented only once. Evaluators completed a survey rating first impression on various measures of success for each photo. RESULTS No differences were seen for social skills, financial, or relationship success scales. A significant decrease in first impression scores between treatment photos was seen for academic performance and occupational success. However, analysis of between-subject effects found that "smile/relax" accounted for the decreased score in both scales. Significant increases in first impression scores were seen for dating success, attractiveness, and athletic success scales where smile/relax and BTxnA contributed significantly to the improved scores. CONCLUSIONS BTxnA improved first impression scores for dating success, attractiveness, and athletic success scales. Academic performance and occupational success scores were not affected by BTxnA when the smile/relax variable was included. The smile/relax variable was a more important predictor for academic performance and occupational success scores.

  2. A Comparative Evaluation of the Linear Dimensional Accuracy of Four Impression Techniques using Polyether Impression Material.

    Science.gov (United States)

    Manoj, Smita Sara; Cherian, K P; Chitre, Vidya; Aras, Meena

    2013-12-01

    There is much discussion in the dental literature regarding the superiority of one impression technique over the other using addition silicone impression material. However, there is inadequate information available on the accuracy of different impression techniques using polyether. The purpose of this study was to assess the linear dimensional accuracy of four impression techniques using polyether on a laboratory model that simulates clinical practice. The impression material used was Impregum Soft™, 3 M ESPE and the four impression techniques used were (1) Monophase impression technique using medium body impression material. (2) One step double mix impression technique using heavy body and light body impression materials simultaneously. (3) Two step double mix impression technique using a cellophane spacer (heavy body material used as a preliminary impression to create a wash space with a cellophane spacer, followed by the use of light body material). (4) Matrix impression using a matrix of polyether occlusal registration material. The matrix is loaded with heavy body material followed by a pick-up impression in medium body material. For each technique, thirty impressions were made of a stainless steel master model that contained three complete crown abutment preparations, which were used as the positive control. Accuracy was assessed by measuring eight dimensions (mesiodistal, faciolingual and inter-abutment) on stone dies poured from impressions of the master model. A two-tailed t test was carried out to test the significance in difference of the distances between the master model and the stone models. One way analysis of variance (ANOVA) was used for multiple group comparison followed by the Bonferroni's test for pair wise comparison. The accuracy was tested at α = 0.05. In general, polyether impression material produced stone dies that were smaller except for the dies produced from the one step double mix impression technique. The ANOVA revealed a highly

  3. How the adoption of impression management goals alters impression formation.

    Science.gov (United States)

    Gibson, Bryan; Poposki, Elizabeth M

    2010-11-01

    Five experiments (N = 390) tested the hypothesis that adopting an impression management goal leads the impression manager to view an interaction partner as having less of the trait he or she is attempting to express. This hypothesis was confirmed for the impression management goals of appearing introverted, extraverted, smart, confident, and happy. Experiment 2 shows that adoption of the impression goal could alter judgments even when participants could not act on the goal. Experiment 3 provides evidence that adopting an impression management goal prompted a comparison mind-set and that this comparison mind-set activation mediated target judgments. Experiment 4 rules out a potential alternative explanation and provides more direct evidence that comparison of the impression manager's self-concept mediates the impression of the target. Experiment 5 eliminates a potential confound and extends the effect to another impression goal. These experiments highlight the dynamic interplay between impression management and impression formation.

  4. A clinical comparison of cordless and conventional displacement systems regarding clinical performance and impression quality.

    Science.gov (United States)

    Acar, Özlem; Erkut, Selim; Özçelik, Tuncer Burak; Ozdemır, Erdem; Akçil, Mehtap

    2014-05-01

    It is not clear whether newly introduced cordless displacement systems are better able to manage gingiva than conventional systems. The purpose of this in vivo study was to evaluate the gingival management ability of 4 different displacement methods with a standardized subgingival preparation finish line. The effects of 4 displacement techniques on gingival management and impression quality were evaluated by means of 6 evaluation criteria. A subgingival preparation finish line of between 1 and 2 mm was ensured, and the buccal aspects of 252 (n=63) teeth were clinically assessed for ease of application, time spent, bleeding, remnants, and dilatation. The complete reproduction of the preparation finish line and the bubble and void formations on polyether impressions were also evaluated. The data were statistically analyzed with the χ(2) test (α=.05). The Bonferroni correction was used to control Type I error for the pairwise comparison groups (α=.008). Statistically significant differences were found for all criteria among the groups (Pimpression quality (Pimpression quality (P>.008). The retraction cap with paste group showed better results for ease of application, time spent, and bleeding than the aluminum chloride impregnated cord group (Pimpression qualities. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

  5. Electronic evaluation for video commercials by impression index.

    Science.gov (United States)

    Kong, Wanzeng; Zhao, Xinxin; Hu, Sanqing; Vecchiato, Giovanni; Babiloni, Fabio

    2013-12-01

    How to evaluate the effect of commercials is significantly important in neuromarketing. In this paper, we proposed an electronic way to evaluate the influence of video commercials on consumers by impression index. The impression index combines both the memorization and attention index during consumers observing video commercials by tracking the EEG activity. It extracts features from scalp EEG to evaluate the effectiveness of video commercials in terms of time-frequency-space domain. And, the general global field power was used as an impression index for evaluation of video commercial scenes as time series. Results of experiment demonstrate that the proposed approach is able to track variations of the cerebral activity related to cognitive task such as observing video commercials, and help to judge whether the scene in video commercials is impressive or not by EEG signals.

  6. Patients' preferences when comparing analogue implant impressions using a polyether impression material versus digital impressions (Intraoral Scan) of dental implants.

    Science.gov (United States)

    Wismeijer, Daniel; Mans, Ronny; van Genuchten, Michiel; Reijers, Hajo A

    2014-10-01

    The primary objective of this clinical study was to assess the patients' perception of the difference between an analogue impression approach on the one hand and an intra-oral scan (IO scan) on the other when restoring implants in the non-aesthetic zone. A second objective was to analyse the difference in time needed to perform these two procedures. Thirty consecutive patients who had received 41 implants (Straumann tissue level) in the non-aesthetic zone in an implant-based referral practice setting in the Netherlands. As they were to receive crown and or bridge work on the implants, in one session, the final impressions were taken with both an analogue technique and with an intraoral scan. Patients were also asked if, directly after the treatment was carried out, they would be prepared to fill out a questionnaire on their perception of both techniques. The time involved following these two procedures was also recorded. The preparatory activities of the treatment, the taste of the impression material and the overall preference of the patients were significantly in favour of the IO scan. The bite registration, the scan head and gag reflex positively tended to the IO scan, but none of these effects were significant. The overall time involved with the IO scan was more negatively perceived than the analogue impression. Overall less time was involved when following the analogue impression technique than with the IO scan. The overall preference of the patients in our sample is significantly in favour of the approach using the IO scan. This preference relates mainly to the differences between the compared approaches with respect to taste effects and their preparatory activities. The patients did perceive the duration of IO scan more negatively than the analogue impression approach. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  7. Functional Impressions in Complete Denture and Overdenture Treatment

    Directory of Open Access Journals (Sweden)

    Hrvoje Kršek

    2015-01-01

    Full Text Available Tooth loss can cause loss of occlusal, masticatory, esthetic, physiognomic, phonetic and psychosocial function of patients. The most frequently used treatment method of completely edentulous patients and patients with a small number of remaining teeth are complete dentures or overdentures. One of the most important clinical and laboratory procedures in their fabrication is functional impression taking. The aim of this paper was to present procedures of taking functional impressions in fabrication of complete dentures and overdentures, using standardized techniques and materials. An accurate functional impression together with other correctly performed clinical and laboratory procedures ensure good retention and stability of dentures, which is a precondition for restoring patients’ lost functions.

  8. Substance Use in Adolescent Psychiatric Outpatients: Self-Report, Health Care Providers' Clinical Impressions, and Urine Screening

    Science.gov (United States)

    Holzer, Laurent; Pihet, Sandrine; Passini, Christina Moses; Feijo, Isabelle; Camus, Didier; Eap, Chin

    2014-01-01

    Purpose: To determine the prevalence of substance use among adolescent psychiatric outpatients using a variety of data sources. Method: Using a questionnaire, 3-month prevalence of substance use data were obtained from 50 adolescents and their health care providers. Adolescents' self-reports and providers' clinical impressions were compared with…

  9. Persistent suicide risk in clinically improved schizophrenia patients: challenge of the suicidal dimension

    Directory of Open Access Journals (Sweden)

    Amresh Shrivastava

    2010-09-01

    Full Text Available Amresh Shrivastava1, Megan E Johnston2, Nilesh Shah3, Marco Innamorati4, Larry Stitt5, Meghana Thakar3, David Lester6, Maurizio Pompili4,71Silver Mind Hospital and Mental Health Foundation of India, Mumbai, India; 2Department of Psychology, University of Toronto, Toronto, ON, Canada; 3Lokmanya Tilak Municipal General Hospital, University of Mumbai, India; 4Department of Neurosciences, Mental Health and Sensory Functions, Suicide Prevention Center, Sant’Andrea Hospital, Sapienza University of Rome, Rome, Italy; 5Department of Biostatistics, The University of Western Ontario, London, ON, Canada; 6The Richard Stockton College of New Jersey, Pomona, NJ, USA; 7McLean Hospital, Harvard Medical School, Boston, MA, USABackground: Suicide is a major problem in schizophrenia, estimated to affect 9%–13% of patients. About 25% of schizophrenic patients make at least one suicide attempt in their lifetime. Current outcome measures do not address this problem, even though it affects quality of life and patient safety. The aim of this study was to assess suicidality in long-term clinically improved schizophrenia patients who were treated in a nongovernmental psychiatric treatment centre in Mumbai, India.Method: Participants were 61 patients out of 200 consecutive hospitalized first-episode patients with schizophrenia diagnosed according to the Diagnostic and Statistical Manual of Mental Disorders who were much improved on the Clinical Global Impression Scale-Improvement (CGI-I scale at the endpoint of a 10-year follow-up. Clinical assessment tools included the Positive and Negative Syndrome Scale for Schizophrenia, CGI-I, Global Assessment of Functioning, and suicidality.Results: Many of the patients, although clinically improved, experienced emerging suicidality during the 10-year follow-up period. All of the patients reported significant suicidality (ie, suicide attempts, suicidal crises, or suicidal ideation at the end of the study, whereas only 83% had

  10. Patients' preferences when comparing analogue implant impressions using a polyether impression material versus digital impressions (Intraoral Scan) of dental implants

    NARCIS (Netherlands)

    Wismeijer, D.; Mans, R.S.; Van Genuchten, M.J.I.M; Reijers, H.A.

    2014-01-01

    Objectives: The primary objective of this clinical study was to assess the patients' perception of the difference between an analogue impression approach on the one hand and an intra-oral scan (IO scan) on the other when restoring implants in the non-aesthetic zone. A second objective was to analyse

  11. Patients' preferences when comparing analogue implant impressions using a polyether impression material versus digital impressions (Intraoral Scan) of dental implants

    NARCIS (Netherlands)

    Wismeijer, D.; Mans, R.; van Genugten, M.; Reijers, H.A.

    2014-01-01

    Objectives The primary objective of this clinical study was to assess the patients' perception of the difference between an analogue impression approach on the one hand and an intra-oral scan (IO scan) on the other when restoring implants in the non-aesthetic zone. A second objective was to analyse

  12. Accuracy of impressions with different impression materials in angulated implants.

    Science.gov (United States)

    Reddy, S; Prasad, K; Vakil, H; Jain, A; Chowdhary, R

    2013-01-01

    To evaluate the dimensional accuracy of the resultant (duplicative) casts made from two different impression materials (polyvinyl siloxane and polyether) in parallel and angulated implants. Three definitive master casts (control groups) were fabricated in dental stone with three implants, placed at equi-distance. In first group (control), all three implants were placed parallel to each other and perpendicular to the plane of the cast. In the second and third group (control), all three implants were placed at 10° and 15 o angulation respectively to the long axis of the cast, tilting towards the centre. Impressions were made with polyvinyl siloxane and polyether impression materials in a special tray, using a open tray impression technique from the master casts. These impressions were poured to obtain test casts. Three reference distances were evaluated on each test cast by using a profile projector and compared with control groups to determine the effect of combined interaction of implant angulation and impression materials on the accuracy of implant resultant cast. Statistical analysis revealed no significant difference in dimensional accuracy of the resultant casts made from two different impression materials (polyvinyl siloxane and polyether) by closed tray impression technique in parallel and angulated implants. On the basis of the results of this study, the use of both the impression materials i.e., polyether and polyvinyl siloxane impression is recommended for impression making in parallel as well as angulated implants.

  13. Digital versus conventional implant impressions for edentulous patients: accuracy outcomes.

    Science.gov (United States)

    Papaspyridakos, Panos; Gallucci, German O; Chen, Chun-Jung; Hanssen, Stijn; Naert, Ignace; Vandenberghe, Bart

    2016-04-01

    To compare the accuracy of digital and conventional impression techniques for completely edentulous patients and to determine the effect of different variables on the accuracy outcomes. A stone cast of an edentulous mandible with five implants was fabricated to serve as master cast (control) for both implant- and abutment-level impressions. Digital impressions (n = 10) were taken with an intraoral optical scanner (TRIOS, 3shape, Denmark) after connecting polymer scan bodies. For the conventional polyether impressions of the master cast, a splinted and a non-splinted technique were used for implant-level and abutment-level impressions (4 cast groups, n = 10 each). Master casts and conventional impression casts were digitized with an extraoral high-resolution scanner (IScan D103i, Imetric, Courgenay, Switzerland) to obtain digital volumes. Standard tessellation language (STL) datasets from the five groups of digital and conventional impressions were superimposed with the STL dataset from the master cast to assess the 3D (global) deviations. To compare the master cast with digital and conventional impressions at the implant level, analysis of variance (ANOVA) and Scheffe's post hoc test was used, while Wilcoxon's rank-sum test was used for testing the difference between abutment-level conventional impressions. Significant 3D deviations (P impressions (P > 0.001). Digital implant impressions are as accurate as conventional implant impressions. The splinted, implant-level impression technique is more accurate than the non-splinted one for completely edentulous patients, whereas there was no difference in the accuracy at the abutment level. The implant angulation up to 15° did not affect the accuracy of implant impressions. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  14. Using Teacher Impression Journals to Improve Intervention Effectiveness

    Science.gov (United States)

    Yu, SeonYeong; Ostrosky, Michaelene M.; Meyer, Lori E.; Favazza, Paddy C.; Mouzourou, Chryso; van Luling, Lisa

    2016-01-01

    This article describes the use of "Teacher Impression Journals" during a larger study that examined the efficacy of an intervention program designed to promote kindergarteners' positive attitudes toward peers with disabilities (i.e., the "Special Friends" program). The journals were designed to gather information about…

  15. How Can the Evidence from Global Large-scale Clinical Trials for Cardiovascular Diseases be Improved?

    Science.gov (United States)

    Sawata, Hiroshi; Tsutani, Kiichiro

    2011-06-29

    Clinical investigations are important for obtaining evidence to improve medical treatment. Large-scale clinical trials with thousands of participants are particularly important for this purpose in cardiovascular diseases. Conducting large-scale clinical trials entails high research costs. This study sought to investigate global trends in large-scale clinical trials in cardiovascular diseases. We searched for trials using clinicaltrials.gov (URL: http://www.clinicaltrials.gov/) using the key words 'cardio' and 'event' in all fields on 10 April, 2010. We then selected trials with 300 or more participants examining cardiovascular diseases. The search revealed 344 trials that met our criteria. Of 344 trials, 71% were randomized controlled trials, 15% involved more than 10,000 participants, and 59% were funded by industry. In RCTs whose results were disclosed, 55% of industry-funded trials and 25% of non-industry funded trials reported statistically significant superiority over control (p = 0.012, 2-sided Fisher's exact test). Our findings highlighted concerns regarding potential bias related to funding sources, and that researchers should be aware of the importance of trial information disclosures and conflicts of interest. We should keep considering management and training regarding information disclosures and conflicts of interest for researchers. This could lead to better clinical evidence and further improvements in the development of medical treatment worldwide.

  16. A Randomised Controlled Trial of complete denture impression materials

    Science.gov (United States)

    Hyde, T.P.; Craddock, H.L.; Gray, J.C.; Pavitt, S.H.; Hulme, C.; Godfrey, M.; Fernandez, C.; Navarro-Coy, N.; Dillon, S.; Wright, J.; Brown, S.; Dukanovic, G.; Brunton, P.A.

    2014-01-01

    Objectives There is continuing demand for non-implant prosthodontic treatment and yet there is a paucity of high quality Randomised Controlled Trial (RCT) evidence for best practice. The aim of this research was to provide evidence for best practice in prosthodontic impressions by comparing two impression materials in a double-blind, randomised, crossover, controlled, clinical trial. Methods Eighty-five patients were recruited, using published eligibility criteria, to the trial at Leeds Dental Institute, UK. Each patient received two sets of dentures; made using either alginate or silicone impressions. Randomisations determined the order of assessment and order of impressions. The primary outcome was patient blinded preference for unadjusted dentures. Secondary outcomes were patient preference for the adjusted dentures, rating of comfort, stability and chewing efficiency, experience of each impression, and an OHIP-EDENT questionnaire. Results Seventy-eight (91.8%) patients completed the primary assessment. 53(67.9%) patients preferred dentures made from silicone impressions while 14(17.9%) preferred alginate impressions. 4(5.1%) patients found both dentures equally satisfactory and 7 (9.0%) found both equally unsatisfactory. There was a 50% difference in preference rates (in favour of silicone) (95%CI 32.7–67.3%, p alginate as their material of choice for secondary impressions for complete dentures. Trial Registration: ISRCTN 01528038.

 This article forms part of a project for which the author (TPH) won the Senior Clinical Unilever Hatton Award of the International Assocation for Dental Research, Capetown, South Africa, June 2014. PMID:24995473

  17. Impression Cytology

    Directory of Open Access Journals (Sweden)

    Sevda Söker

    2007-01-01

    Full Text Available Impression cytology is fast, easy to perform, economical and non-invasive technique for the diagnosis of conjunctival eye diseases. Conjunctival impression cytology using cellulose acetate filter paper of the ocular surface epithelium with no side effects or contraindication. In this article, technique of conjunctival impression cytology is reviewed.

  18. Accuracy of implant impressions without impression copings: a three-dimensional analysis.

    Science.gov (United States)

    Kwon, Joo-Hyun; Son, Yong-Ha; Han, Chong-Hyun; Kim, Sunjai

    2011-06-01

    Implant impressions without impression copings can be used for cement-retained implant restorations. A comparison of the accuracy of implant impressions with and without impression copings is needed. The purpose of this study was to evaluate and compare the dimensional accuracy of implant definitive casts that are fabricated by implant impressions with and without impression copings. An acrylic resin maxillary model was fabricated, and 3 implant replicas were secured in the right second premolar, first, and second molars. Two impression techniques were used to fabricate definitive casts (n=10). For the coping group (Group C), open tray impression copings were used for the final impressions. For the no-coping group (Group NC), cementable abutments were connected to the implant replicas, and final impressions were made assuming the abutments were prepared teeth. Computerized calculation of the centroids and long axes of the implant or stone abutment replicas was performed. The Mann-Whitney U test analyzed the amount of linear and rotational distortion between groups (α =.05). At the first molar site, Group NC showed significantly greater linear distortion along the Y-axis, with a small difference between the groups (Group C, 7.8 ± 7.4 μm; Group NC, 19.5 ± 12.2). At the second molar site, increased distortion was noted in Group NC for every linear and rotational variable, except for linear distortion along the Z-axis. Implant impression with open tray impression copings produced more accurate definitive casts than those fabricated without impression copings, especially those with greater inter-abutment distance. Copyright © 2011 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

  19. Time to improvement of pain and sleep quality in clinical trials of pregabalin for the treatment of fibromyalgia.

    Science.gov (United States)

    Arnold, Lesley M; Emir, Birol; Pauer, Lynne; Resnick, Malca; Clair, Andrew

    2015-01-01

    To determine the time to immediate and sustained clinical improvement in pain and sleep quality with pregabalin in patients with fibromyalgia. A post hoc analysis of four 8- to 14-week phase 2-3, placebo-controlled trials of fixed-dose pregabalin (150-600 mg/day) for fibromyalgia, comprising 12 pregabalin and four placebo treatment arms. A total of 2,747 patients with fibromyalgia, aged 18-82 years. Pain and sleep quality scores, recorded daily on 11-point numeric rating scales (NRSs), were analyzed to determine time to immediate improvement with pregabalin, defined as the first of ≥2 consecutive days when the mean NRS score was significantly lower for pregabalin vs placebo in those treatment arms with a significant improvement at endpoint, and time to sustained clinical improvement with pregabalin, defined as a ≥1-point reduction of the baseline NRS score of patient responders who had a ≥30% improvement on the pain NRS, sleep NRS, or Fibromyalgia Impact Questionnaire (FIQ) from baseline to endpoint, or who reported "much improved" or "very much improved" on the Patient Global Impression of Change (PGIC) at endpoint. Significant improvements in pain and sleep quality scores at endpoint vs placebo were seen in 8/12 and 11/12 pregabalin treatment arms, respectively (P < 0.05). In these arms, time to immediate improvements in pain or sleep occurred by day 1 or 2. Time to sustained clinical improvement occurred significantly earlier in pain, sleep, PGIC, and FIQ responders (P < 0.02) with pregabalin vs placebo. Both immediate and sustained clinical improvements in pain and sleep quality occurred faster with pregabalin vs placebo. Wiley Periodicals, Inc.

  20. Torque resistance of impression copings after direct implant impression: An in vitro evaluation of impression materials with and without adhesive.

    Science.gov (United States)

    Auroy, Pascal; Nicolas, Emanuel; Bedouin, Yvan

    2017-01-01

    No data are available on the ability of an impression coping to resist the manual placement of an abutment replica (implant analog) during prosthodontic laboratory procedures after a direct (pick-up) impression. The purpose of this in vitro study was to evaluate the torque resistance of impression copings after a direct impression, that is, the amount of rotational torque sufficient to induce irreversible displacement of impression copings in the impression material bulk once the impression has been made. A reference model with 5 abutment replicas was constructed. Five impression copings were screwed onto the abutment replicas, and standardized impressions were made. A controlled twisting force was applied to each impression coping. A torque tester recorded the torque variation. Three elastomeric impression materials were tested. ANOVA and the Tukey test (α=.05) were performed using an average of 30 measurements per impression material, with and without adhesive. ANOVA and the Tukey test results showed that the adhesive, cohesive, and mechanical bonds between the impression coping and the impression material depended greatly on the type of material and that the average rupture threshold of these bonds was statistically significantly different in pairwise comparisons (Ptorque. The polyether impression material is the direct impression material that showed the highest breakdown threshold for adhesive bonding when used without an adhesive. The use of an adhesive on impression copings leads to irreversible deformation of the interface at torque stresses well below the adhesive bond threshold of the same materials used without an adhesive. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

  1. How Can the Evidence from Global Large-scale Clinical Trials for Cardiovascular Diseases be Improved?

    Directory of Open Access Journals (Sweden)

    Tsutani Kiichiro

    2011-06-01

    Full Text Available Abstract Background Clinical investigations are important for obtaining evidence to improve medical treatment. Large-scale clinical trials with thousands of participants are particularly important for this purpose in cardiovascular diseases. Conducting large-scale clinical trials entails high research costs. This study sought to investigate global trends in large-scale clinical trials in cardiovascular diseases. Findings We searched for trials using clinicaltrials.gov (URL: http://www.clinicaltrials.gov/ using the key words 'cardio' and 'event' in all fields on 10 April, 2010. We then selected trials with 300 or more participants examining cardiovascular diseases. The search revealed 344 trials that met our criteria. Of 344 trials, 71% were randomized controlled trials, 15% involved more than 10,000 participants, and 59% were funded by industry. In RCTs whose results were disclosed, 55% of industry-funded trials and 25% of non-industry funded trials reported statistically significant superiority over control (p = 0.012, 2-sided Fisher's exact test. Conclusions Our findings highlighted concerns regarding potential bias related to funding sources, and that researchers should be aware of the importance of trial information disclosures and conflicts of interest. We should keep considering management and training regarding information disclosures and conflicts of interest for researchers. This could lead to better clinical evidence and further improvements in the development of medical treatment worldwide.

  2. Trends in complete denture impressions in pakistan

    International Nuclear Information System (INIS)

    Vohra, F.; Rashid, H.; Hanif, A.

    2015-01-01

    Multiple materials and techniques have been reported for complete denture impressions in literature. The aim of the study was to assess the trends in complete denture impression materials and techniques among general dental practitioners (GDP) and specialists (SP) in Pakistan. Methods: In this cross-sectional study, self-designed-structured questionnaires were distributed among 500 dentists in Pakistan. The three-part questionnaire enquired about the demographic features, preferred impression materials, impression techniques and related procedures commonly used in their clinical practice. A comparison between the responses of SP and GDP was also drawn. Frequency distribution and Chi-square test were performed to compare the responses. Results: A total of 294 questionnaires were completed at a response rate of 58.8%. 75% of GDP used alginate for primary impressions and 66% of SP preferred impression compound for the same. A majority of both SP and GDP favoured the used of custom trays (SP 81%, GDP 85%) and selective pressure technique (SP 84%, GDP 53%) for final impression. However, 85% of GDP used zinc-oxide eugenol and 62% of SP favoured elastomeric materials for the same. Most of the SP and GDP used chemical cured resin custom trays (SP 54%, GDP 75%), however, 86% of SP used spaced trays and almost 60% of GDP preferred close-fitting trays. Conclusions: The practice of GDP and SP with regards to CD impression materials and techniques differed significantly. Continued education and training for GDP and SP with respect to procedures and techniques related to CD is recommended. (author)

  3. Effects of Impression Material, Impression Tray Type, and Type of Partial Edentulism on the Fit of Cobalt-Chromium Partial Denture Frameworks on Initial Clinical Insertion: A Retrospective Clinical Evaluation.

    Science.gov (United States)

    Baig, Mirza Rustum; Akbar, Jaber Hussain; Qudeimat, Muawia; Omar, Ridwaan

    2018-02-15

    To evaluate the effects of impression material, impression tray type, and type of partial edentulism (ie, Kennedy class) on the accuracy of fit of cobalt-chromium (Co-Cr) partial removable dental prostheses (PRDP) in terms of the number of fabricated frameworks required until the attainment of adequate fit. Electronic case documentations of 120 partially edentulous patients provided with Co-Cr PRDP treatment for one or both arches were examined. Statistical analyses of data were performed using analysis of variance and Tukey honest significant difference test to compare the relationships between the different factors and the number of frameworks that needed to be fabricated for each patient (α = .05). Statistical analysis of data derived from 143 records (69 maxillary and 74 mandibular) revealed no significant correlation between impression material, tray type, or Kennedy class and the number of construction attempts for the pooled or individual arch data (P ≥ .05). In PRDP treatment, alginate can be chosen as a first-choice material, and metal stock trays can be a preferred option for making final impressions to fabricate Co-Cr frameworks.

  4. [Impressions techniques--Part 2].

    Science.gov (United States)

    Levartovsky, S; Masri, M; Alter, E; Pilo, R

    2012-10-01

    A dental impression is a positive replica of the teeth, the surrounding gingiva and the border between them; the purpose of which is to create an accurate master model. Two major techniques for impressions exist today: The conventional and the digital impressions. The current article describes both techniques. In the conventional impressions, it is important to choose a proper tray, stock or custom, and to mix the material properly. The commonly used impression techniques for making a conventional impression are described with a review on the effect of the technique on its accuracy. The effect of the wash bulk on the accuracy of the stone dies and/or the restoration is discussed, as well. The digital impressions with their advantages and disadvantages are described in comparison to the conventional impressions. Although, digital impressions eliminate some of the negative characteristics of conventional impressions, proper soft-tissue management and isolation of tooth preparation margins is still mandatory.

  5. Accuracy of impressions with different impression materials in ...

    African Journals Online (AJOL)

    Purpose: To evaluate the dimensional accuracy of the resultant (duplicative) casts made from two ... materials in a special tray, using a open tray impression technique from the master casts. These impressions were poured to obtain test casts.

  6. Comparison of digital and conventional impression techniques: evaluation of patients' perception, treatment comfort, effectiveness and clinical outcomes.

    Science.gov (United States)

    Yuzbasioglu, Emir; Kurt, Hanefi; Turunc, Rana; Bilir, Halenur

    2014-01-30

    The purpose of this study was to compare two impression techniques from the perspective of patient preferences and treatment comfort. Twenty-four (12 male, 12 female) subjects who had no previous experience with either conventional or digital impression participated in this study. Conventional impressions of maxillary and mandibular dental arches were taken with a polyether impression material (Impregum, 3 M ESPE), and bite registrations were made with polysiloxane bite registration material (Futar D, Kettenbach). Two weeks later, digital impressions and bite scans were performed using an intra-oral scanner (CEREC Omnicam, Sirona). Immediately after the impressions were made, the subjects' attitudes, preferences and perceptions towards impression techniques were evaluated using a standardized questionnaire. The perceived source of stress was evaluated using the State-Trait Anxiety Scale. Processing steps of the impression techniques (tray selection, working time etc.) were recorded in seconds. Statistical analyses were performed with the Wilcoxon Rank test, and p < 0.05 was considered significant. There were significant differences among the groups (p < 0.05) in terms of total working time and processing steps. Patients stated that digital impressions were more comfortable than conventional techniques. Digital impressions resulted in a more time-efficient technique than conventional impressions. Patients preferred the digital impression technique rather than conventional techniques.

  7. Accuracy of two digital implant impression systems based on confocal microscopy with variations in customized software and clinical parameters.

    Science.gov (United States)

    Giménez, Beatriz; Pradíes, Guillermo; Martínez-Rus, Francisco; Özcan, Mutlu

    2015-01-01

    To evaluate the accuracy of two digital impression systems based on the same technology but different postprocessing correction modes of customized software, with consideration of several clinical parameters. A maxillary master model with six implants located in the second molar, second premolar, and lateral incisor positions was fitted with six cylindrical scan bodies. Scan bodies were placed at different angulations or depths apical to the gingiva. Two experienced and two inexperienced operators performed scans with either 3D Progress (MHT) or ZFX Intrascan (Zimmer Dental). Five different distances between implants (scan bodies) were measured, yielding five data points per impression and 100 per impression system. Measurements made with a high-accuracy three-dimensional coordinate measuring machine (CMM) of the master model acted as the true values. The values obtained from the digital impressions were subtracted from the CMM values to identify the deviations. The differences between experienced and inexperienced operators and implant angulation and depth were compared statistically. Experience of the operator, implant angulation, and implant depth were not associated with significant differences in deviation from the true values with both 3D Progress and ZFX Intrascan. Accuracy in the first scanned quadrant was significantly better with 3D Progress, but ZFX Intrascan presented better accuracy in the full arch. Neither of the two systems tested would be suitable for digital impression of multiple-implant prostheses. Because of the errors, further development of both systems is required.

  8. Functional Impressions in Complete Denture and Overdenture Treatment

    OpenAIRE

    Hrvoje Kršek; Nikša Dulčić

    2015-01-01

    Tooth loss can cause loss of occlusal, masticatory, esthetic, physiognomic, phonetic and psychosocial function of patients. The most frequently used treatment method of completely edentulous patients and patients with a small number of remaining teeth are complete dentures or overdentures. One of the most important clinical and laboratory procedures in their fabrication is functional impression taking. The aim of this paper was to present procedures of taking functional impressions in fab...

  9. Comparison of digital and conventional impression techniques: evaluation of patients’ perception, treatment comfort, effectiveness and clinical outcomes

    Science.gov (United States)

    2014-01-01

    Background The purpose of this study was to compare two impression techniques from the perspective of patient preferences and treatment comfort. Methods Twenty-four (12 male, 12 female) subjects who had no previous experience with either conventional or digital impression participated in this study. Conventional impressions of maxillary and mandibular dental arches were taken with a polyether impression material (Impregum, 3 M ESPE), and bite registrations were made with polysiloxane bite registration material (Futar D, Kettenbach). Two weeks later, digital impressions and bite scans were performed using an intra-oral scanner (CEREC Omnicam, Sirona). Immediately after the impressions were made, the subjects’ attitudes, preferences and perceptions towards impression techniques were evaluated using a standardized questionnaire. The perceived source of stress was evaluated using the State-Trait Anxiety Scale. Processing steps of the impression techniques (tray selection, working time etc.) were recorded in seconds. Statistical analyses were performed with the Wilcoxon Rank test, and p < 0.05 was considered significant. Results There were significant differences among the groups (p < 0.05) in terms of total working time and processing steps. Patients stated that digital impressions were more comfortable than conventional techniques. Conclusions Digital impressions resulted in a more time-efficient technique than conventional impressions. Patients preferred the digital impression technique rather than conventional techniques. PMID:24479892

  10. Dimensional accuracy of digital dental models from cone-beam computed tomography scans of alginate impressions according to time elapsed after the impressions.

    Science.gov (United States)

    Lee, Sang-Mi; Hou, Yanan; Cho, Jin-Hyoung; Hwang, Hyeon-Shik

    2016-02-01

    Our objective was to investigate the dimensional accuracy of digital dental models obtained from the cone-beam computed tomography (CBCT) scans of alginate impressions according to the time elapsed after the impressions were taken. Alginate impressions were obtained of 20 adults using 2 alginate materials: Alginoplast (Heraeus Kulzer, Hanau, Germany) and Cavex (Cavex Holland, Haarlem, The Netherlands). These impressions were stored in wet conditions and scanned by CBCT immediately after impression-taking and after storage times of 12, 24, 36, 48, 60, and 72 hours. After reconstruction of the 3-dimensional digital dental models, the models were measured, and the data were analyzed to determine the dimensional changes according to the time elapsed. The changes within the measurement error were regarded as clinically acceptable in this study. The measurement errors ranged from 0.27 to 0.29 mm in the digital dental models obtained from CBCT scans of the alginate impressions. All measurements showed decreasing accuracy with greater elapsed time after the impressions were taken. Changes above the measurement error occurred at 24 and 36 hours for Cavex and Alginoplast, respectively. Digital dental models can be obtained from CBCT scans of alginate impressions without sending them to a remote laboratory. However, the impressions need to be scanned within 24 hours; otherwise, dimensional changes lead to errors that exceed the error of measurement. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

  11. In vitro study of transmission of bacteria from contaminated metal models to stone models via impressions

    DEFF Research Database (Denmark)

    Sofou, A.; Larsen, T.; Öwall, B.

    2002-01-01

    Dental impression, stone model, bacterial contamination, cross-infection, dental clinic, dental laboratory......Dental impression, stone model, bacterial contamination, cross-infection, dental clinic, dental laboratory...

  12. Accuracy of Digital vs. Conventional Implant Impressions

    Science.gov (United States)

    Lee, Sang J.; Betensky, Rebecca A.; Gianneschi, Grace E.; Gallucci, German O.

    2015-01-01

    The accuracy of digital impressions greatly influences the clinical viability in implant restorations. The aim of this study is to compare the accuracy of gypsum models acquired from the conventional implant impression to digitally milled models created from direct digitalization by three-dimensional analysis. Thirty gypsum and 30 digitally milled models impressed directly from a reference model were prepared. The models were scanned by a laboratory scanner and 30 STL datasets from each group were imported to an inspection software. The datasets were aligned to the reference dataset by a repeated best fit algorithm and 10 specified contact locations of interest were measured in mean volumetric deviations. The areas were pooled by cusps, fossae, interproximal contacts, horizontal and vertical axes of implant position and angulation. The pooled areas were statistically analysed by comparing each group to the reference model to investigate the mean volumetric deviations accounting for accuracy and standard deviations for precision. Milled models from digital impressions had comparable accuracy to gypsum models from conventional impressions. However, differences in fossae and vertical displacement of the implant position from the gypsum and digitally milled models compared to the reference model, exhibited statistical significance (p<0.001, p=0.020 respectively). PMID:24720423

  13. Atomoxetine treatment of attention-deficit/hyperactivity disorder in young adults with assessment of functional outcomes: a randomized, double-blind, placebo-controlled clinical trial.

    Science.gov (United States)

    Durell, Todd M; Adler, Lenard A; Williams, Dave W; Deldar, Ahmed; McGough, James J; Glaser, Paul E; Rubin, Richard L; Pigott, Teresa A; Sarkis, Elias H; Fox, Bethany K

    2013-02-01

    Attention-deficit/hyperactivity disorder (ADHD) is associated with significant impairment in multiple functional domains. This trial evaluated efficacy in ADHD symptoms and functional outcomes in young adults treated with atomoxetine. Young adults (18-30 years old) with ADHD were randomized to 12 weeks of double-blind treatment with atomoxetine (n = 220) or placebo (n = 225). The primary efficacy measure of ADHD symptom change was Conners' Adult ADHD Rating Scale (CAARS): Investigator-Rated: Screening Version Total ADHD Symptoms score with adult prompts. Secondary outcomes scales included the Adult ADHD Quality of Life-29, Clinical Global Impression-ADHD-Severity, Patient Global Impression-Improvement, CAARS Self-Report, Behavior Rating Inventory of Executive Function-Adult Version Self-Report, and assessments of depression, anxiety, sleepiness, driving behaviors, social adaptation, and substance use. Atomoxetine was superior to placebo on CAARS: Investigator-Rated: Screening Version (atomoxetine [least-squares mean ± SE, -13.6 ± 0.8] vs placebo [-9.3 ± 0.8], 95% confidence interval [-6.35 to -2.37], P < 0.001), Clinical Global Impression-ADHD-Severity (atomoxetine [-1.1 ± 0.1] vs placebo [-0.7 ± 0.1], 95% confidence interval [-0.63 to -0.24], P < 0.001), and CAARS Self-Report (atomoxetine [-11.9 ± 0.8] vs placebo [-7.8 ± 0.7], 95% confidence interval [-5.94 to -2.15], P < 0.001) but not on Patient Global Impression-Improvement. In addition, atomoxetine was superior to placebo on Adult ADHD Quality of Life-29 and Behavior Rating Inventory of Executive Function-Adult Version Self-Report. Additional assessments failed to detect significant differences (P ≥ 0.05) between atomoxetine and placebo. The adverse event profile was similar to that observed in other atomoxetine studies. Nausea, decreased appetite, insomnia, dry mouth, irritability, dizziness, and dyspepsia were reported significantly more often with atomoxetine than with placebo. Atomoxetine reduced

  14. Effects of impression levels and trays on the accuracy of impressions taken from angulated implants.

    Science.gov (United States)

    Geramipanah, Farideh; Sahebi, Majid; Davari, Maryam; Hajimahmoudi, Mohammadreza; Rakhshan, Vahid

    2015-09-01

    It is crucial to keep the misfit of the abutment-fixture unit at the lowest possible rate. There are a few controversial studies on the accuracy of impression making of angulated implants, and much fewer (and controversial) studies on the abutment-level impression technique, which is a convenient and clinically favorable method. Besides, there are no studies on comparison of sectional vs. full-arch trays. We aimed to assess these. A trapezoidal model with four angulated implants installed at 20° and 30° buccal tilts was fabricated. Forty impressions were taken from this model, with two groups of full-arch and sectional custom trays (n = 2 × 20), each divided into two subgroups of implant-level and abutment-level techniques (n = 2 × 2 × 10 in four subgroups). Absolute and non-absolute linear and angular impression errors were estimated by comparing the fabricated casts with the model, using a coordinate measuring machine. The effects of sectional/full-arch trays and abutment-level and fixture-level techniques on impression accuracies were analyzed using one- and two-way analyses of variance (ANOVA), Tukey, Mann-Whitney, and one-sample t-tests (α = 0.05, Mann-Whitney's α using the Bonferroni Bonferroni method). No significant differences between the absolute linear errors of the two trays (P = 0.100 [ANOVA]) and the two levels (P = 0.400 [ANOVA]) were observed. The assessment of absolute angular errors showed no significant differences (all P values ≥ 0.4 [ANOVA]). The difference between the linear errors in the full-arch vs. sectional trays was not significant in the fixture-level group (P = 0.290). However, in the abutment-level group, the linear error was significantly greater in the sectional tray compared to full-arch tray (P = 0.013, α = 0.025 [Mann-Whitney]). Using sectional trays might not be advantageous over full-arch trays. Sectional trays are not recommended for taking abutment-level impressions. The abutment

  15. Clinical relevance of findings in trials of CBT for depression

    NARCIS (Netherlands)

    Lepping, P.; Whittington, R.; Sambhi, R.S.; Lane, S.; Poole, R.; Leucht, S.; Cuijpers, P.; McCabe, R.; Waheed, W.

    2017-01-01

    Cognitive behavioural therapy (CBT) is beneficial in depression. Symptom scores can be translated into Clinical Global Impression (CGI) scale scores to indicate clinical relevance. We aimed to assess the clinical relevance of findings of randomised controlled trials (RCTs) of CBT in depression. We

  16. Accuracy of 3 different impression techniques for internal connection angulated implants.

    Science.gov (United States)

    Tsagkalidis, George; Tortopidis, Dimitrios; Mpikos, Pavlos; Kaisarlis, George; Koidis, Petros

    2015-10-01

    Making implant impressions with different angulations requires a more precise and time-consuming impression technique. The purpose of this in vitro study was to compare the accuracy of nonsplinted, splinted, and snap-fit impression techniques of internal connection implants with different angulations. An experimental device was used to allow a clinical simulation of impression making by means of open and closed tray techniques. Three different impression techniques (nonsplinted, acrylic-resin splinted, and indirect snap-fit) for 6 internal-connected implants at different angulations (0, 15, 25 degrees) were examined using polyether. Impression accuracy was evaluated by measuring the differences in 3-dimensional (3D) position deviations between the implant body/impression coping before the impression procedure and the coping/laboratory analog positioned within the impression, using a coordinate measuring machine. Data were analyzed by 2-way ANOVA. Means were compared with the least significant difference criterion at Pimpression technique exhibited a higher accuracy than the other techniques studied when increased implant angulations at 25 degrees were involved. Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

  17. The influence of sequence of impressions on children's anxiety and discomfort.

    Science.gov (United States)

    Kaakko, Tarja; Horn, Michael T; Weinstein, Philip; Kaufman, Eliezer; Leggott, Penelope; Coldwell, Susan E

    2003-01-01

    Laboratory studies with adults and children have found lower pain reports when pain proceeds from high to low rather than from low to high. However, pediatric dentists often ease children into difficult procedures (from easiest to most difficult). This study investigated the influence of order during a clinical procedure that involved taking maxillary and mandibular alginate impressions. Subjects were 24 children aged 5 to 6 years (preoperational stage) and 24 children aged 9 to 10 years (concrete operational stage). Children were randomly assigned to either start with the mandibular (presumed to be easier) or start with the maxillary (presumed to be harder) impressions. Discomfort during the sequence of impressions was measured using the "Affective Facial Scale." A telephone interview was conducted 2 weeks later to evaluate the memory of discomfort. The results indicated that the older children who started with the mandibular (easier) impression and ended with the maxillary (more uncomfortable) impression reported significantly lower discomfort than older children who started with the maxillary impression and ended with the mandibular (Mann-Whitney U, Z = -2.08; P < .037). The same tendency was noted 2 weeks later on a telephone interview. By phone, 92% of the older children who started with the mandibular impression rated the sequence of impressions as "not at all bad," while only 58% of the older children who started with the maxillary impression rated the overall experience as "not at all bad" (chi2 = 3.56, P < .059). The younger children did not show any significant difference in their ratings of discomfort at either of the assessment periods. Consistent with clinical practice, this study observed that older children benefit from beginning an appointment with an easier procedure and working up to a more difficult one.

  18. White light scanner-based repeatability of 3-dimensional digitizing of silicon rubber abutment teeth impressions.

    Science.gov (United States)

    Jeon, Jin-Hun; Lee, Kyung-Tak; Kim, Hae-Young; Kim, Ji-Hwan; Kim, Woong-Chul

    2013-11-01

    The aim of this study was to evaluate the repeatability of the digitizing of silicon rubber impressions of abutment teeth by using a white light scanner and compare differences in repeatability between different abutment teeth types. Silicon rubber impressions of a canine, premolar, and molar tooth were each digitized 8 times using a white light scanner, and 3D surface models were created using the point clouds. The size of any discrepancy between each model and the corresponding reference tooth were measured, and the distribution of these values was analyzed by an inspection software (PowerInspect 2012, Delcamplc., Birmingham, UK). Absolute values of discrepancies were analyzed by the Kruskal-Wallis test and multiple comparisons (α=.05). The discrepancy between the impressions for the canine, premolar, and molar teeth were 6.3 µm (95% confidence interval [CI], 5.4-7.2), 6.4 µm (95% CI, 5.3-7.6), and 8.9 µm (95% CI, 8.2-9.5), respectively. The discrepancy of the molar tooth impression was significantly higher than that of other tooth types. The largest variation (as mean [SD]) in discrepancies was seen in the premolar tooth impression scans: 26.7 µm (95% CI, 19.7-33.8); followed by canine and molar teeth impressions, 16.3 µm (95% CI, 15.3-17.3), and 14.0 µm (95% CI, 12.3-15.7), respectively. The repeatability of the digitizing abutment teeth's silicon rubber impressions by using a white light scanner was improved compared to that with a laser scanner, showing only a low mean discrepancy between 6.3 µm and 8.9 µm, which was in an clinically acceptable range. Premolar impression with a long and narrow shape showed a significantly larger discrepancy than canine and molar impressions. Further work is needed to increase the digitizing performance of the white light scanner for deep and slender impressions.

  19. A new method for assessing the accuracy of full arch impressions in patients.

    Science.gov (United States)

    Kuhr, F; Schmidt, A; Rehmann, P; Wöstmann, B

    2016-12-01

    To evaluate a new method of measuring the real deviation (trueness) of full arch impressions intraorally and to investigate the trueness of digital full arch impressions in comparison to a conventional impression procedure in clinical use. Four metal spheres were fixed with composite using a metal application aid to the lower teeth of 50 test subjects as reference structures. One conventional impression (Impregum Penta Soft) with subsequent type-IV gypsum model casting (CI) and three different digital impressions were performed in the lower jaw of each test person with the following intraoral scanners: Sirona CEREC Omnicam (OC), 3M True Definition (TD), Heraeus Cara TRIOS (cT). The digital and conventional (gypsum) models were analyzed relative to the spheres. Linear distance and angle measurements between the spheres, as well as digital superimpositions of the spheres with the reference data set were executed. With regard to the distance measurements, CI showed the smallest deviations followed by intraoral scanners TD, cT and OC. A digital superimposition procedure yielded the same order for the outcomes: CI (15±4μm), TD (23±9μm), cT (37±14μm), OC (214±38μm). Angle measurements revealed the smallest deviation for TD (0.06°±0,07°) followed by CI (0.07°±0.07°), cT (0.13°±0.15°) and OC (0.28°±0.21°). The new measuring method is suitable for measuring the dimensional accuracy of full arch impressions intraorally. CI is still significantly more accurate than full arch scans with intraoral scanners in clinical use. Conventional full arch impressions with polyether impression materials are still more accurate than full arch digital impressions. Digital impression systems using powder application and active wavefront sampling technology achieve the most accurate results in comparison to other intraoral scanning systems (DRKS-ID: DRKS00009360, German Clinical Trials Register). Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Full arch scans: conventional versus digital impressions--an in-vitro study.

    Science.gov (United States)

    Ender, A; Mehl, A

    2011-01-01

    The digital intraoral impression has become a central part of the CAD/CAM technique. The objective of the present study was to compare the accuracy (trueness and precision) of digital impressions of the full arch with that of conventional impressions on the in-vitro model. For this purpose, a master model was acquired with a new reference scanning process, the measuring trueness of which was +/- 4.1 microm and the precision +/- 2.5 microm. On the one hand, conventional impressions and then plaster models (n = 5) were produced from this master model, and on the other hand, digital impressions were made with the Cerec AC Bluecam and the Lava COS system (each n = 5). The plaster models were also scanned with the reference scanner. The available data records were superimposed and the differences determined. The deviation from the master model defines the trueness of the impression method. The deviations of the models among one another demonstrate the precision of the method. The trueness of the impressions was 55 +/- 21.8 microm in the conventional impression group, for digital impressions with Cerec Bluecam it was 49 +/- 14.2 microm and for digital impressions with Lava COS 40.3 +/- 14.1 microm. The precision was 61.3 +/- 17.9 microm for conventional impression with Impregum, 30.9 +/- 7.1 microm for digital impression with the Cerec Bluecam and 60.1 +/- 31.3 microm for digital impression with Lava COS. These in-vitro results show that accuracy of the digital impression is similar to that of the conventional impression. These results will have to be confirmed in further clinical studies.

  1. Surgical treatment of Chiari malformation complicated with basilar impression

    Directory of Open Access Journals (Sweden)

    Yuan MA

    2011-02-01

    Full Text Available Objective To evaluate the therapeutic effect of small craniotomic posterior fossa decompression combined with occipital-cervical bone graft fusion and internal fixation on Chiari malformation complicated with basilar impression.Methods The clinical data of 16 cases(7 males and 9 females,aged 17 to 65 years,mean 36.4 of Chiari malformation complicated with basilar impression from 2006 to 2010 were retrospectively analyzed.The diagnoses for all the patients were confirmed by radiology.Small craniotomic posterior fossa decompression was performed in all patients,cerebellar tonsils were resected,and then one-stage occipital-cervical bone graft fusion using autogenous iliac bone and internal wiring fixation were performed.Neck support was used for 3 months after surgery.Results Symptoms were significantly improved in all cases after surgical operation.No patient died or infected.Cerebrospinal fluid leakage was found at draining site in one case.Transient pain of scapular and chest was found in one case and disappeared spontaneously.A 6-months follow-up showed that 6 patients were cured,9 improved and 1 unchanged according to Symon and Lavender standard.Postoperative MRI showed the reconstructed cisterna magna was clear in all patients,no cerebellar ptosis was found,and the occipital-cervical graft bone was fused.Conclusion In patients with Chiari malformation complicated with basilar impression,small craniotomic posterior fossa decompression combined with one-stage occipital-cervical bone graft fusion and internal wiring fixation has a clear and definite effect,it can increase the volume of posterior fossa and alleviate the ventral brain stem compression simultaneously,and reconstruct the stability of cranio-cervical junction.

  2. A randomised controlled trial of complete denture impression materials.

    Science.gov (United States)

    Hyde, T P; Craddock, H L; Gray, J C; Pavitt, S H; Hulme, C; Godfrey, M; Fernandez, C; Navarro-Coy, N; Dillon, S; Wright, J; Brown, S; Dukanovic, G; Brunton, P A

    2014-08-01

    There is continuing demand for non-implant prosthodontic treatment and yet there is a paucity of high quality Randomised Controlled Trial (RCT) evidence for best practice. The aim of this research was to provide evidence for best practice in prosthodontic impressions by comparing two impression materials in a double-blind, randomised, crossover, controlled, clinical trial. Eighty-five patients were recruited, using published eligibility criteria, to the trial at Leeds Dental Institute, UK. Each patient received two sets of dentures; made using either alginate or silicone impressions. Randomisations determined the order of assessment and order of impressions. The primary outcome was patient blinded preference for unadjusted dentures. Secondary outcomes were patient preference for the adjusted dentures, rating of comfort, stability and chewing efficiency, experience of each impression, and an OHIP-EDENT questionnaire. Seventy-eight (91.8%) patients completed the primary assessment. 53(67.9%) patients preferred dentures made from silicone impressions while 14(17.9%) preferred alginate impressions. 4(5.1%) patients found both dentures equally satisfactory and 7 (9.0%) found both equally unsatisfactory. There was a 50% difference in preference rates (in favour of silicone) (95%CI 32.7-67.3%, pUnilever Hatton Award of the International Assocation for Dental Research, Capetown, South Africa, June 2014. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

  3. The Use of Digital Impressions to Fabricate Tooth-Supported Partial Removable Dental Prostheses: A Clinical Report.

    Science.gov (United States)

    Mansour, Mohamed; Sanchez, Eliana; Machado, Camilo

    2016-08-01

    Impression making is a critical step in the fabrication of a partial removable dental prosthesis (RDP). A technique is described for making final impressions to fabricate partial RDPs for Kennedy class III patients using a computer-aided design and computer-assisted manufacturing digital impression system. © 2015 by the American College of Prosthodontists.

  4. In Vitro Comparative Evaluation of Different Types of Impression Trays and Impression Materials on the Accuracy of Open Tray Implant Impressions: A Pilot Study

    Directory of Open Access Journals (Sweden)

    Sonam Gupta

    2017-01-01

    Full Text Available Purpose. For a precise fit of multiple implant framework, having an accurate definitive cast is imperative. The present study evaluated dimensional accuracy of master casts obtained using different impression trays and materials with open tray impression technique. Materials and Methods. A machined aluminum reference model with four parallel implant analogues was fabricated. Forty implant level impressions were made. Eight groups (n=5 were tested using impression materials (polyether and vinylsiloxanether and four types of impression trays, two being custom (self-cure acrylic and light cure acrylic and two being stock (plastic and metal. The interimplant distances were measured on master casts using a coordinate measuring machine. The collected data was compared with a standard reference model and was statistically analyzed using two-way ANOVA. Results. Statistically significant difference (p0.05 was observed between varied stock and custom trays. Conclusions. The polyether impression material proved to be more accurate than vinylsiloxanether impression material. The rigid nonperforated stock trays, both plastic and metal, could be an alternative for custom trays for multi-implant impressions when used with medium viscosity impression materials.

  5. In vivo evaluation of inter-operator reproducibility of digital dental and conventional impression techniques.

    Directory of Open Access Journals (Sweden)

    Emi Kamimura

    Full Text Available The aim of this study was to evaluate and compare the inter-operator reproducibility of three-dimensional (3D images of teeth captured by a digital impression technique to a conventional impression technique in vivo.Twelve participants with complete natural dentition were included in this study. A digital impression of the mandibular molars of these participants was made by two operators with different levels of clinical experience, 3 or 16 years, using an intra-oral scanner (Lava COS, 3M ESPE. A silicone impression also was made by the same operators using the double mix impression technique (Imprint3, 3M ESPE. Stereolithography (STL data were directly exported from the Lava COS system, while STL data of a plaster model made from silicone impression were captured by a three-dimensional (3D laboratory scanner (D810, 3shape. The STL datasets recorded by two different operators were compared using 3D evaluation software and superimposed using the best-fit-algorithm method (least-squares method, PolyWorks, InnovMetric Software for each impression technique. Inter-operator reproducibility as evaluated by average discrepancies of corresponding 3D data was compared between the two techniques (Wilcoxon signed-rank test.The visual inspection of superimposed datasets revealed that discrepancies between repeated digital impression were smaller than observed with silicone impression. Confirmation was forthcoming from statistical analysis revealing significantly smaller average inter-operator reproducibility using a digital impression technique (0.014± 0.02 mm than when using a conventional impression technique (0.023 ± 0.01 mm.The results of this in vivo study suggest that inter-operator reproducibility with a digital impression technique may be better than that of a conventional impression technique and is independent of the clinical experience of the operator.

  6. In vivo evaluation of inter-operator reproducibility of digital dental and conventional impression techniques

    Science.gov (United States)

    Kamimura, Emi; Tanaka, Shinpei; Takaba, Masayuki; Tachi, Keita; Baba, Kazuyoshi

    2017-01-01

    Purpose The aim of this study was to evaluate and compare the inter-operator reproducibility of three-dimensional (3D) images of teeth captured by a digital impression technique to a conventional impression technique in vivo. Materials and methods Twelve participants with complete natural dentition were included in this study. A digital impression of the mandibular molars of these participants was made by two operators with different levels of clinical experience, 3 or 16 years, using an intra-oral scanner (Lava COS, 3M ESPE). A silicone impression also was made by the same operators using the double mix impression technique (Imprint3, 3M ESPE). Stereolithography (STL) data were directly exported from the Lava COS system, while STL data of a plaster model made from silicone impression were captured by a three-dimensional (3D) laboratory scanner (D810, 3shape). The STL datasets recorded by two different operators were compared using 3D evaluation software and superimposed using the best-fit-algorithm method (least-squares method, PolyWorks, InnovMetric Software) for each impression technique. Inter-operator reproducibility as evaluated by average discrepancies of corresponding 3D data was compared between the two techniques (Wilcoxon signed-rank test). Results The visual inspection of superimposed datasets revealed that discrepancies between repeated digital impression were smaller than observed with silicone impression. Confirmation was forthcoming from statistical analysis revealing significantly smaller average inter-operator reproducibility using a digital impression technique (0.014± 0.02 mm) than when using a conventional impression technique (0.023 ± 0.01 mm). Conclusion The results of this in vivo study suggest that inter-operator reproducibility with a digital impression technique may be better than that of a conventional impression technique and is independent of the clinical experience of the operator. PMID:28636642

  7. Marginal adaptation of CAD-CAM onlays: Influence of preparation design and impression technique.

    Science.gov (United States)

    Lima, Fernanda Ferruzzi; Neto, Constantino Fernandes; Rubo, José H; Santos, Gildo Coelho; Moraes Coelho Santos, Maria Jacinta

    2018-03-15

    Factors that may affect the marginal adaptation of computer-aided design and computer-aided manufacturing (CAD-CAM) restorations include preparation design, impression technique, and CAD-CAM system. The influence of impression technique and preparation design on CAD-CAM partial coverage restorations has not been fully addressed. The purpose of this in vitro study was to investigate the influence of direct and indirect digital impression techniques and 2 preparation designs on the marginal adaptation of CAD-CAM onlays. Two mesio-occlusal buccal onlay preparations with reduction of the mesiobuccal cusp were made: conventional preparation (CP) with a 1.2-mm modified shoulder margin and modified preparation (MP) flat cuspal reduction without shoulder. Virtual models were generated from each preparation by using a digital scanner (BlueCam; Dentsply Sirona) from the plastic teeth (direct digital impression) or from the stone dies (indirect digital impression). Onlays were designed using a CAD-CAM system (CEREC 4.0; Dentsply Sirona), and nanoceramic resin blocks (Lava Ultimate Restorative; 3M ESPE) were milled using the CEREC MCX milling machine. Marginal discrepancy was evaluated using an optical stereomicroscope at ×25 magnification in 18 locations distributed along the margins of the preparation. The data were analyzed by using 3-way ANOVA followed by the Tukey HSD test (α=.05). CP presented a statistically significant reduced average marginal adaptation (59 ±50 μm) than did MP (69 ±58 μm) (Pmarginal discrepancy in the mesial and buccal locations of MP when compared with CP. Regarding impression techniques, the buccal location presented the smallest average marginal discrepancy in restorations fabricated with indirect impression when compared with direct impression (42 ±33 μm and 60 ±39 μm) (Pmargin presented improved marginal adaptation compared with modified preparation with flat cuspal reduction. Direct and indirect digital impression techniques produced

  8. Driving clinical study efficiency by using a productivity breakdown model: comparative evaluation of a global clinical study and a similar Japanese study.

    Science.gov (United States)

    Takahashi, K; Sengoku, S; Kimura, H

    2011-02-01

    A fundamental management imperative of pharmaceutical companies is to contain surging costs of developing and launching drugs globally. Clinical studies are a research and development (R&D) cost driver. The objective of this study was to develop a productivity breakdown model, or a key performance indicator (KPI) tree, for an entire clinical study and to use it to compare a global clinical study with a similar Japanese study. We, thereby, hope to identify means of improving study productivity. We developed the new clinical study productivity breakdown model, covering operational aspects and cost factors. Elements for improving clinical study productivity were assessed from a management viewpoint by comparing empirical tracking data from a global clinical study with a Japanese study with similar protocols. The following unique and material differences, beyond simple international difference in cost of living, that could affect the efficiency of future clinical trials were identified: (i) more frequent site visits in the Japanese study, (ii) head counts at the Japanese study sites more than double those of the global study and (iii) a shorter enrollment time window of about a third that of the global study at the Japanese study sites. We identified major differences in the performance of the two studies. These findings demonstrate the potential of the KPI tree for improving clinical study productivity. Trade-offs, such as those between reduction in head count at study sites and expansion of the enrollment time window, must be considered carefully. © 2010 Blackwell Publishing Ltd.

  9. Comparison of digital and conventional impression techniques: evaluation of patients’ perception, treatment comfort, effectiveness and clinical outcomes

    OpenAIRE

    Yuzbasioglu, Emir; Kurt, Hanefi; Turunc, Rana; Bilir, Halenur

    2014-01-01

    Background The purpose of this study was to compare two impression techniques from the perspective of patient preferences and treatment comfort. Methods Twenty-four (12 male, 12 female) subjects who had no previous experience with either conventional or digital impression participated in this study. Conventional impressions of maxillary and mandibular dental arches were taken with a polyether impression material (Impregum, 3 M ESPE), and bite registrations were made with polysiloxane bite reg...

  10. Comparison of olanzapine and risperidone in the EMBLEM Study: translation of randomized controlled trial findings into clinical practice.

    Science.gov (United States)

    Novick, Diego; Reed, Catherine; Haro, Josep Maria; Gonzalez-Pinto, Ana; Perrin, Elena; Aguado, Jaume; Tohen, Mauricio

    2010-09-01

    Data from the EMBLEM Study, a 2-year, prospective, observational study of health outcomes associated with acute treatment of patients experiencing a manic/mixed episode of bipolar disorder, was used to compare the effectiveness of olanzapine monotherapy versus risperidone monotherapy, and to investigate whether the treatment effects were similar to those reported in a 3-week, randomized controlled trial assessing the same treatments. Symptom severity measures included the Young Mania Rating Scale (YMRS), the 5-item Hamilton Depression Rating Scale, and the Clinical Global Impression-Bipolar Disorder Scale. A total of 245 EMBLEM inpatients were analyzed with YMRS >or=20: olanzapine (n=209), risperidone (n=36). Both the treatment groups had similar improvements in YMRS from baseline to 6 weeks, but there was a significantly greater improvement in 5-item Hamilton Depression Rating Scale in the olanzapine group. There was a similar improvement in Clinical Global Impression-Bipolar Disorder Scale in both the groups and the occurrence of treatment-emergent adverse events and weight gain did not differ between the treatment groups. The EMBLEM results partly support those of the randomized controlled trial, which suggests olanzapine and risperidone have similar improvements in mania but that olanzapine monotherapy may be more effective than risperidone monotherapy in the treatment of depressive symptoms associated with mania. Limitations include differences in study design, patient population, and length of follow-up.

  11. Quantifying Appointments, Treatment Time, Impressions, and Diagnostic Data of Cases Staffed by General Dentists and Prosthodontists in a Dental School Clinic.

    Science.gov (United States)

    Imbery, Terence A; Greenfield, Kristy; Diaz, Nicholas; Janus, Charles; Best, Al M

    2016-10-01

    The aim of this retrospective study was to quantify differences between general dentists and prosthodontists regarding appointments, treatment time, impressions, and preoperative diagnostic data in teaching predoctoral clinical fixed prosthodontics. Electronic dental records (n=356) of patients treated at one dental school in academic year 2012 were randomly selected for review to obtain the following data: faculty and student demographics, number of appointments and treatment time from preparation to cementation, number of impressions made, completion of oral disease control treatment (ODCT), and presence of preoperative periapical radiographs and diagnostic casts. The results showed that ODCT was completed in 78%, preoperative radiographs were present in 76%, and diagnostic casts made in 53% of the cases reviewed. There was no statistically significant difference in number of appointments, treatment time, or number of final impressions when students were staffed by general dentists or prosthodontists. When students were supervised by multiple faculty members, there was generally an increase in treatment time and number of appointments and final impressions. Although this study found no statistically significant differences between general dentists and prosthodontists regarding the criteria evaluated, the results suggest that faculty development and calibration are needed to ensure ODCT is completed and preoperative radiographs are present prior to initiating fixed prosthodontic procedures.

  12. Two-step impression/ injection, an alternative putty/ wash impression technique: case report.

    Science.gov (United States)

    Caputi, S; Murmura, G; Sinjari, B; Varvara, G

    2012-01-01

    We here describe a new technique for making a definitive impression that we refer to as the two-step impression/injection technique. This technique initially follows the classical one-step putty/ light-body impression technique with the polymerization of the putty and the light-body compound. This is then followed by the second step: injection of extra-light-body compound into the preparation through a hole in the metal stock tray. The aim of this additional step is to control the wash bulk and minimize the changes that can produce unfavorable impression results. This new two-step impression/injection technique allows displacement of soft tissues, such as the tongue, during the first seating of the putty and wash materials, while in the second step, the extra-light-body compound records all of the finer details without being compressed.

  13. Accuracy of Referring Provider and Endoscopist Impressions of Colonoscopy Indication.

    Science.gov (United States)

    Naveed, Mariam; Clary, Meredith; Ahn, Chul; Kubiliun, Nisa; Agrawal, Deepak; Cryer, Byron; Murphy, Caitlin; Singal, Amit G

    2017-07-01

    Background: Referring provider and endoscopist impressions of colonoscopy indication are used for clinical care, reimbursement, and quality reporting decisions; however, the accuracy of these impressions is unknown. This study assessed the sensitivity, specificity, positive and negative predictive value, and overall accuracy of methods to classify colonoscopy indication, including referring provider impression, endoscopist impression, and administrative algorithm compared with gold standard chart review. Methods: We randomly sampled 400 patients undergoing a colonoscopy at a Veterans Affairs health system between January 2010 and December 2010. Referring provider and endoscopist impressions of colonoscopy indication were compared with gold-standard chart review. Indications were classified into 4 mutually exclusive categories: diagnostic, surveillance, high-risk screening, or average-risk screening. Results: Of 400 colonoscopies, 26% were performed for average-risk screening, 7% for high-risk screening, 26% for surveillance, and 41% for diagnostic indications. Accuracy of referring provider and endoscopist impressions of colonoscopy indication were 87% and 84%, respectively, which were significantly higher than that of the administrative algorithm (45%; P 90%) for determining screening (vs nonscreening) indication, but specificity of the administrative algorithm was lower (40.3%) compared with referring provider (93.7%) and endoscopist (84.0%) impressions. Accuracy of endoscopist, but not referring provider, impression was lower in patients with a family history of colon cancer than in those without (65% vs 84%; P =.001). Conclusions: Referring provider and endoscopist impressions of colonoscopy indication are both accurate and may be useful data to incorporate into algorithms classifying colonoscopy indication. Copyright © 2017 by the National Comprehensive Cancer Network.

  14. Multi-regional clinical trials and global drug development

    Directory of Open Access Journals (Sweden)

    Premnath Shenoy

    2016-01-01

    Full Text Available Drug development has been globalized, and multi-regional clinical trial (MRCT for regulatory submission has widely been conducted by many discovery based global pharmaceutical companies with the objective of reducing the time lag of launch in key markets and improve patient access to new and innovative treatments. Sponsors are facing several challenges while conducting multiregional clinical trials. Challenges under the heads statistics, clinical, regulatory operational, and ethics have been discussed. Regulators in different countries such as USA, EU-Japan, and China have issued guidance documents in respect of MRCT's. Lack of harmonization in the design and planning of MRCT is perceived to create a difficult situation to sponsors adversely affecting progressing MRCT in more and more discoveries. International conference on hormonisation (ICH has initiated the process for having a harmonized guidance document on MRCT. This document is likely to be issued in early 2017.

  15. Accuracy of Different Implant Impression Techniques: Evaluation of New Tray Design Concept.

    Science.gov (United States)

    Liu, David Yu; Cader, Fathima Nashmie; Abduo, Jaafar; Palamara, Joseph

    2017-12-29

    To evaluate implant impression accuracy with a new tray design concept in comparison to nonsplinted and splinted impression techniques for a 2-implant situation. A reference bar titanium framework was fabricated to fit on 2 parallel implants. The framework was used to generate a resin master model with 2 implants that fit precisely against the framework. Three impression techniques were evaluated: (1) nonsplinted, (2) splinted, and (3) nonsplinted with modified tray impressions. All the trays were fabricated from light-cured acrylic resin material with openings that corresponded to the implant impression copings. Ten impressions were taken for each technique using poly(vinyl siloxane) impression material. The impressions were poured with type IV dental stone to generate the test casts. A rosette strain gauge was bonded to the middle of the framework. As the framework retaining screws were tightened on each test cast, the developed strains were recorded until the completion of the tightening to 35 Ncm. The generated strains of the rosette strain gauge were used to calculate the maximum principal strain. A statistically significant difference was observed among the different impression techniques. The modified tray design impression technique was associated with the least framework strains, which indicates greater accuracy compared with the other techniques. There was no significant difference between the splinted and the nonsplinted impression techniques. The new tray design concept appeared to produce more accurate implant impressions than the other techniques. Despite the statistical difference among the impression techniques, the clinical significance of this difference is yet to be determined. © 2017 by the American College of Prosthodontists.

  16. Retrospective chart review of a referenced EEG database in assisting medication selection for treatment of depression in patients with eating disorders

    Directory of Open Access Journals (Sweden)

    Greenblatt JM

    2011-09-01

    Full Text Available James M Greenblatt1, Craig Sussman1, Mariko Jameson1, Lee Yuan1, Daniel A Hoffman2, Dan V Iosifescu31Comprehensive Psychiatric Resources, Waltham, MA, USA; 2Neuro-Therapy Clinic Inc, Denver, CO, USA; 3Mood and Anxiety Disorders Program, Mount Sinai School of Medicine, New York, NY, USABackground: A retrospective chart review was undertaken in a private clinic to examine the clinical outcomes for patients with an eating disorder comorbid with depression or bipolar illness who underwent a referenced electroencephalographic (EEG database analysis to help guide medication selection.Method: We examined 33 charts for patients with the primary psychiatric diagnosis of an eating disorder and comorbid major depressive disorder or bipolar disorder who underwent a quantitative EEG database assessment to provide additional information for choices of medication. The current analysis includes data from 22 subjects who accepted treatments based on information from the referenced-EEG medication database. Hamilton Depression Rating Scale, Clinical Global Impression-Severity, Clinical Global Impression-Improvement, and hospitalization data were examined for these patients.Results: Patients whose EEG data was used for clinical treatment reported significant decreases in associated depressive symptoms (HDRS scores, overall severity of illness (Clinical Global Impression-Severity, and overall clinical global improvement (Clinical Global Impression-Improvement. This cohort also reported fewer inpatient, residential, and partial hospitalization program days following referenced-EEG compared with the two-year period prior to treatment.Conclusion: These findings are consistent with previously reported data for patients with eating disorders and suggest the need for future studies using EEG data correlated with those from other patients with similar quantitative EEG features.Keywords: eating disorders, anorexia, bulimia, depression, referenced-EEG, chart review

  17. Single Stage Silicone Border Molded Closed Mouth Impression Technique-Part II.

    Science.gov (United States)

    Solomon, E G R

    2011-09-01

    Functioning of a complete denture depends to a great extent on the impression technique. Several impression techniques have been described in the literature since the turn of this century when Greene [Clinical courses in dental prothesis, 1916] brothers introduced the first scientific system of recording dental impression. Advocates of each technique have their own claim of superiority over the other. The introduction of elastomeric impression materials [Skinner and Cooper, J Am Dent Assoc 51:523-536, 1955] has made possible new techniques of recording impression for complete denture construction. These rubber like materials are of two types; one has a polysulfide base and is popularily known as polysulfide rubber (Thiokol and Mercaptan). The other variety has a silicone base known as silicone rubber or silicone elastomer. Silicone elastomers are available in four different consistencies; a thin easy flowing light bodied material,a creamy medium bodied material, a highly viscous heavy bodied material and a kneadable putty material. This paper describes an active closed mouth impression technique with one stage border molding using putty silicone material as a substitute for low fusing compound.

  18. Impression Generation of Indonesian Cultural Paintings for Mobile Application with Culture Dependent Color-Impression Metric Creation Contents

    Directory of Open Access Journals (Sweden)

    Devira Nanda Kuswhara

    2014-06-01

    Full Text Available Painting is one of complex image reflecting observations and feelings of the artist to the environment. This condition extends the need of painting impression generation system since common people with lack of art experience would have difficulties to interpret the painting. From this point of view we presents a new model to provide representative impressions of paintings by providing a color-impression metric taken from public survey and implement it for mobile application. The new model provides analytical functions to generate the representative impression of the image query. The functions consist of two main section: (1 The cultural-dependent color-impression metric creation which consist of conducting survey, applying normalized 3D color vector quantization to image dataset, generating image-impression metric, and generating color- impression metric; and (2 Impression generation of image query which consist of applying normalized 3D color vector quantization to image query and measuring the similarity between image query andcolor-impression metric. To perform our proposed impression generation system, we examine our system with Indonesian cultural image dataset and 5 different mobile devices. Our proposed system performs main color impression precision result with average precision of more than 60%. Brightness intensity and zooming affects the retrieved impressions. Rotating captures of an image generate the same retrieved impressions. The system also performs average response time vary in range 41263 to 117434 milliseconds from all devices. Keywords: impression generation system, color based impression, cultural computing, mobile application.

  19. Direct impression on agar surface as a diagnostic sampling procedure for candida balanitis.

    Science.gov (United States)

    Lisboa, Carmen; Santos, António; Azevedo, Filomena; Pina-Vaz, Cidália; Rodrigues, Acácio Gonçalves

    2010-02-01

    The diagnosis of candida balanitis should be based upon both clinical and mycological data. The procedure of material collection is a critical issue to confirm or rule out the clinical diagnosis of candida balanitis. To compare direct impression of the glans on the agar surface of solid culture media with the collection of genital exudates with cotton swab for the diagnosis of candida balanitis. A prospective cross-sectional study was carried out during a 36-month period. Sexually transmitted disease clinic attendees with balanitis and asymptomatic men were included. Specimens for yeast culture were collected from the glans penis and inner preputial layer using the direct impression on CHROMagar candida medium and by swabbing with a sterile cotton swab. Among 478 men enrolled, 189 had balanitis. The prevalence of candida balanitis was 17.8% (85/478) confirmed after culture by direct impression; the swab method detected only 54/85 (63.5%) of these men. Of the 289 asymptomatic men, 36 (12.5%) yielded Candida spp; the swab method detected only 38.9% of these men. The risk of having candida balanitis is 8.9 (IC 95% 2.48 to 32.04) whenever the number of candida colonies recovered by direct impression was greater than 10. Direct impression on CHROMagar candida medium resulted in the highest Candida spp recovery rate. More than 10 colonies yielded by impression culture were statistically associated with candida balanitis. This method shows the ideal profile for sampling the male genital area for yeasts and should be included in the management of balanitis.

  20. Evaluation of oral scanning in comparison to impression using three-dimensional registration

    Science.gov (United States)

    Brogle-Kim, Yur-Chung; Deyhle, Hans; Müller, Bert; Schulz, Georg; Bormann, Therese; Beckmann, Felix; Jäger, Kurt

    2012-10-01

    Crown and bridge restorations are one of the main treatment methods in fixed prosthodontics. The fabrication requires data on the patient's denture shape. This information is generally obtained as a hard copy from an impression mold. Alternatively, one can acquire the data electronically using oral optical three-dimensional (3D) imaging techniques, which determine the surface of the denture. The aim of the study was to quantitatively compare the accuracy of three dimensional scanning with that of conventional impressions and give a statement how far the scanner provides a clinical alternative with equal or better precision. Data from 10 teeth were acquired in the dental office with a polyether impression material and an oral scanner. Data from the impressions were digitalized by means of micro computed tomography. The data were then 3D registered to identify the potential differences between impression and optical scan. We could demonstrate that the oral scanner's data and the conventional impressions are comparable.

  1. Three-dimensional accuracy of a digitally coded healing abutment implant impression system.

    Science.gov (United States)

    Ng, Simon D; Tan, Keson B; Teoh, K H; Cheng, Ansgar C; Nicholls, Jack I

    2014-01-01

    This study examined the three-dimensional (3D) accuracy of the Encode Impression System (EN) in transferring the locations of two implants from master models to test models and compared this to the direct impression (DI) technique. The effect of interimplant angulation on the 3D accuracy of both impression techniques was also evaluated. Seven sectional polymethyl methacrylate mandibular arch master models were fabricated with implants in the first premolar and first molar positions. The implants were placed parallel to each other or angulated mesiodistally or buccolingually with total divergent angles of 10, 20, or 30 degrees. Each master model was secured onto an aluminum block containing a gauge block, which defined the local coordinate references. Encode healing abutments were attached to the implants before impressions were made for the EN test models; pickup impression copings were attached for the DI test models. For the seven test groups of each impression technique, a total of 70 test models were fabricated (n = 5). The EN test models were sent to Biomet 3i for implant analog placement. The centroid of each implant or implant analog and the angular orientation of the long axis relative to the x- and y-axes were measured with a coordinate measuring machine. Statistical analyses were performed. Impression technique had a significant effect on y distortion, global linear distortion, and absolute xz and yz angular distortions. Interimplant angulation had significant effects on x and y distortions. However, neither impression technique nor interimplant angulation had a significant effect on z distortion. Distortions were observed with both impression techniques. However, the results suggest that EN was less accurate than DI.

  2. Plasma fluoxetine concentrations and clinical improvement in an adolescent sample diagnosed with major depressive disorder, obsessive-compulsive disorder, or generalized anxiety disorder.

    Science.gov (United States)

    Blázquez, Ana; Mas, Sergi; Plana, Maria Teresa; Gassó, Patricia; Méndez, Iria; Torra, Mercè; Arnaiz, Joan Albert; Lafuente, Amàlia; Lázaro, Luisa

    2014-06-01

    Fluoxetine (FLX) has been one of the most widely studied selective serotonin reuptake inhibitors in adolescents. Despite its efficacy, however, 30% to 40% of patients do not respond to treatment. The aim of this study was to evaluate whether clinical improvement or adverse events are related to the corrected dose of FLX at 8 and 12 weeks after starting treatment in a sample of adolescents diagnosed with major depressive disorder, obsessive-compulsive disorder, or generalized anxiety disorder. Seventy-four subjects aged between 10 and 17 years participated in the study. Clinical improvement was measured with the Clinical Global Impression-Improvement Scale, whereas the UKU (Udvalg for Klinske Undersogelser) scale was administered to assess adverse effects of treatment. Fluoxetine per kilograms of body weight was related to serum concentration of FLX, NORFLX (norfluoxetine), FLX + NORFLX, and FLX/NORFLX. No relationship was found between dose-corrected FLX levels and therapeutic or adverse effects. No differences in serum concentrations were found between responders and nonresponders to treatment. Sex differences were observed in relation to dose and FLX serum concentration. The analysis by diagnosis revealed differences in FLX dose between obsessive-compulsive disorder patients and both generalized anxiety disorder and major depressive disorder patients. Fluoxetine response seems to be influenced by factors such as sex, diagnosis, or certain genes that might be involved in the drug's pharmacokinetics and pharmacodynamics. Clinical and pharmacogenetic studies are needed to elucidate further the differences between treatment responders and nonresponders.

  3. Impression block with orientator

    International Nuclear Information System (INIS)

    Brilin, V I; Ulyanova, O S

    2015-01-01

    Tool review, namely the impression block, applied to check the shape and size of the top of fish as well as to determine the appropriate tool for fishing operation was realized. For multiple application and obtaining of the impress depth of 3 cm and more, the standard volumetric impression blocks with fix rods are used. However, the registered impress of fish is not oriented in space and the rods during fishing are in the extended position. This leads to rods deformation and sinking due to accidental impacts of impression block over the borehole irregularity and finally results in faulty detection of the top end of fishing object in hole. The impression blocks with copy rods and fixed magnetic needle allow estimating the object configuration and fix the position of magnetic needle determining the position of the top end of object in hole. However, the magnetic needle fixation is realized in staged and the rods are in extended position during fishing operations as well as it is in standard design. The most efficient tool is the impression block with copy rods which directs the examined object in the borehole during readings of magnetic needles data from azimuth plate and averaging of readings. This significantly increases the accuracy of fishing toll direction. The rods during fishing are located in the body and extended only when they reach the top of fishing object

  4. ETI: Our first impressions

    Science.gov (United States)

    Harrison, Albert A.; Johnson, Joel T.

    2000-06-01

    Despite scant or ambiguous information, people are capable of developing comprehensive and detailed impressions. Consequently, if the detection of an electromagnetically-active civilization is announced, many people will rapidly form impressions of what the extraterrestrials and their civilization are "like". First impressions are crucial, not only because of their immediate psychological, social, and political consequences on Earth, but because they can influence the future of interstellar communication. Initial impressions will rest less on hard data than on the nature and tone of the "evidence" that is gleaned from the transmission; the interpretation and dissemination of this evidence; and the hard wiring, psychological programming, cultural conditioning, and social influence processes that shape human perception. We consider how dispositional inferences, implicit theories of personality, negatively toned or adverse information, physical appearance, prior expectations, the confirmation bias, and thinking and unthinking approaches to attitude formation are likely to affect human impressions of ETI.

  5. Giving the wrong impression: food and beverage brand impressions delivered to youth through popular movies.

    Science.gov (United States)

    Skatrud-Mickelson, Monica; Adachi-Mejia, Anna M; MacKenzie, Todd A; Sutherland, Lisa A

    2012-06-01

    Marketing on television showcases less-healthful options, with emerging research suggesting movies promote similar products. Given the obesity epidemic, understanding advertising to youth should be a public health imperative. The objective of this study was to estimate youth impressions to food and beverages delivered through movies. Impressions were calculated by dividing US receipts annually into average movie ticket prices, then multiplying this by the number of brand appearances. Examination by ratings, product types and ages were conducted by Spearman rank correlation coefficient tests. Youth in the USA saw over 3 billion food, beverage or food-retail establishment (FRE) impressions on average, annually from 1996 to 2005. Those aged 12-18 viewed over half of all impressions, with PG-13-rated movies containing 61.5% of impressions. There were no significant trends in brand appearances by food, beverage or FRE impressions over the decade, although there was a decreasing trend in R-rated impressions for both foods (Pbeverages (Pfood and beverage impressions annually to youth. Given the public health crisis of obesity, future research should further investigate these trends, as well as the potential association of these unhealthy exposures in youth.

  6. In vivo precision of conventional and digital methods for obtaining quadrant dental impressions.

    Science.gov (United States)

    Ender, Andreas; Zimmermann, Moritz; Attin, Thomas; Mehl, Albert

    2016-09-01

    Quadrant impressions are commonly used as alternative to full-arch impressions. Digital impression systems provide the ability to take these impressions very quickly; however, few studies have investigated the accuracy of the technique in vivo. The aim of this study is to assess the precision of digital quadrant impressions in vivo in comparison to conventional impression techniques. Impressions were obtained via two conventional (metal full-arch tray, CI, and triple tray, T-Tray) and seven digital impression systems (Lava True Definition Scanner, T-Def; Lava Chairside Oral Scanner, COS; Cadent iTero, ITE; 3Shape Trios, TRI; 3Shape Trios Color, TRC; CEREC Bluecam, Software 4.0, BC4.0; CEREC Bluecam, Software 4.2, BC4.2; and CEREC Omnicam, OC). Impressions were taken three times for each of five subjects (n = 15). The impressions were then superimposed within the test groups. Differences from model surfaces were measured using a normal surface distance method. Precision was calculated using the Perc90_10 value. The values for all test groups were statistically compared. The precision ranged from 18.8 (CI) to 58.5 μm (T-Tray), with the highest precision in the CI, T-Def, BC4.0, TRC, and TRI groups. The deviation pattern varied distinctly depending on the impression method. Impression systems with single-shot capture exhibited greater deviations at the tooth surface whereas high-frame rate impression systems differed more in gingival areas. Triple tray impressions displayed higher local deviation at the occlusal contact areas of upper and lower jaw. Digital quadrant impression methods achieve a level of precision, comparable to conventional impression techniques. However, there are significant differences in terms of absolute values and deviation pattern. With all tested digital impression systems, time efficient capturing of quadrant impressions is possible. The clinical precision of digital quadrant impression models is sufficient to cover a broad variety of

  7. Digital vs. conventional implant impressions: efficiency outcomes.

    Science.gov (United States)

    Lee, Sang J; Gallucci, German O

    2013-01-01

    The aim of this pilot study was to evaluate the efficiency, difficulty and operator's preference of a digital impression compared with a conventional impression for single implant restorations. Thirty HSDM second year dental students performed conventional and digital implant impressions on a customized model presenting a single implant. The outcome of the impressions was evaluated under an acceptance criteria and the need for retake/rescan was decided. The efficiency of both impression techniques was evaluated by measuring the preparation, working, and retake/scan time (m/s) and the number of retakes/rescans. Participants' perception on the level of difficulty for the both impressions was assessed with a visual analogue scale (VAS) questionnaire. Multiple questionnaires were obtained to assess the participants' perception on preference, effectiveness and proficiency. Mean total treatment time was of 24:42 m/s for conventional and 12:29 m/s for digital impressions (P impressions (P impression (P impression technique and 30.63 (±17.57) for digital impression technique (P = 0.006). Sixty percent of the participants preferred the digital impression, 7% the conventional impression technique and 33% preferred either technique. Digital impressions resulted in a more efficient technique than conventional impressions. Longer preparation, working, and retake time were consumed to complete an acceptable conventional impression. Difficulty was lower for the digital impression compared with the conventional ones when performed by inexperienced second year dental students. © 2012 John Wiley & Sons A/S.

  8. Accuracy of a new elastomeric impression material for complete-arch dental implant impressions.

    Science.gov (United States)

    Baig, Mirza R; Buzayan, Muaiyed M; Yunus, Norsiah

    2018-05-01

    The aim of the present study was to assess the accuracy of multi-unit dental implant casts obtained from two elastomeric impression materials, vinyl polyether silicone (VPES) and polyether (PE), and to test the effect of splinting of impression copings on the accuracy of implant casts. Forty direct impressions of a mandibular reference model fitted with six dental implants and multibase abutments were made using VPES and PE, and implant casts were poured (N = 20). The VPES and PE groups were split into four subgroups of five each, based on splinting type: (a) no splinting; (b) bite registration polyether; (c) bite registration addition silicone; and (d) autopolymerizing acrylic resin. The accuracy of implant-abutment replica positions was calculated on the experimental casts, in terms of interimplant distances in the x, y, and z-axes, using a coordinate measuring machine; values were compared with those measured on the reference model. Data were analyzed using non-parametrical Kruskal-Wallis and Mann-Whitney tests at α = .05. The differences between the two impression materials, VPES and PE, regardless of splinting type, were not statistically significant (P>.05). Non-splinting and splinting groups were also not significantly different for both PE and VPES (P>.05). The accuracy of VPES impression material seemed comparable with PE for multi-implant abutment-level impressions. Splinting had no effect on the accuracy of implant impressions. © 2018 John Wiley & Sons Australia, Ltd.

  9. An evaluation of student and clinician perception of digital and conventional implant impressions.

    Science.gov (United States)

    Lee, Sang J; Macarthur, Robert X; Gallucci, German O

    2013-11-01

    The accuracy and efficiency of digital implant impressions should match conventional impressions. Comparisons should be made with clinically relevant data. The purpose of this study was to evaluate the difficulty level and operator's perception between dental students and experienced clinicians when making digital and conventional implant impressions. Thirty experienced dental professionals and 30 second-year dental students made conventional and digital impressions of a single implant model. A visual analog scale (VAS) and multiple-choice questionnaires were used to assess the participant's perception of difficulty, preference, and effectiveness. Wilcoxon signed-rank test within the groups and Wilcoxon rank-sum test between the groups were used for statistical analysis (α=.05). On a 0 to 100 VAS, the student group scored a mean difficulty level of 43.1 (±18.5) for the conventional impression technique and 30.6 (±17.6) for the digital impression technique (P=.006). The clinician group scored a mean (standard deviation) difficulty level of 30.9 (±19.6) for conventional impressions and 36.5 (±20.6) for digital impressions (P=.280). Comparison between groups showed a mean difficulty level with the conventional impression technique significantly higher in the student group (P=.030). The digital impression was not significantly different between the groups (P=.228). Sixty percent of the students preferred the digital impression and 7% the conventional impression; 33% expressed no preference. In the clinician group, 33% preferred the digital impression and 37% the conventional impression; 30% had no preference. Seventy-seven percent of the student group felt most effective with digital impressions, 10% with conventional impressions, and 13% with either technique, whereas 40% of the clinician group chose the digital impression as the most effective technique, 53% the conventional impression, and 7% either technique. The conventional impression was more difficult to

  10. Giving the wrong impression: food and beverage brand impressions delivered to youth through popular movies

    Science.gov (United States)

    Skatrud-Mickelson, Monica; Adachi-Mejia, Anna M.; MacKenzie, Todd A.; Sutherland, Lisa A.

    2012-01-01

    Background Marketing on television showcases less-healthful options, with emerging research suggesting movies promote similar products. Given the obesity epidemic, understanding advertising to youth should be a public health imperative. The objective of this study was to estimate youth impressions to food and beverages delivered through movies. Methods Impressions were calculated by dividing US receipts annually into average movie ticket prices, then multiplying this by the number of brand appearances. Examination by ratings, product types and ages were conducted by Spearman rank correlation coefficient tests. Results Youth in the USA saw over 3 billion food, beverage or food–retail establishment (FRE) impressions on average, annually from 1996 to 2005. Those aged 12–18 viewed over half of all impressions, with PG-13-rated movies containing 61.5% of impressions. There were no significant trends in brand appearances by food, beverage or FRE impressions over the decade, although there was a decreasing trend in R-rated impressions for both foods (P< 0.01) and beverages (P< 0.01), but not FREs (P= 0.08). Conclusions Movies promote billions of food and beverage impressions annually to youth. Given the public health crisis of obesity, future research should further investigate these trends, as well as the potential association of these unhealthy exposures in youth. PMID:22076600

  11. Substance Use as Impression Management.

    Science.gov (United States)

    Sharp, Mark J.; Getz, J. Greg

    1996-01-01

    Examines the function of substance use as an impression management tactic. Introductory psychology students (n=377) responded to a survey instrument measuring self-monitoring, perceived success in impression management, interaction anxiety, and self-esteem. Results suggest that alcohol use may serve an impression management function. (JPS)

  12. Factors influencing optical 3D scanning of vinyl polysiloxane impression materials.

    Science.gov (United States)

    DeLong, R; Pintado, M R; Ko, C C; Hodges, J S; Douglas, W H

    2001-06-01

    Future growth in dental practice lies in digital imaging enhancing many chairside procedures and functions. This revolution requires the fast, accurate, and 3D digitizing of clinical records. One such clinical record is the chairside impression. This study investigated how surface angle and surface roughness affect the digitizing of vinyl polysiloxane impression materials. Seventeen vinyl polysiloxane impression materials were digitized with a white light optical digitizing system. Each sample was digitized at 3 different angles: 0 degrees, 22.5 degrees, and 45 degrees, and 2 digitizer camera f-stops. The digitized images were rendered on a computer monitor using custom software developed under NIH/NIDCR grant DE12225. All the 3D images were rotated to the 0 degrees position, cropped using Corel Photo-Paint 8 (Corel Corp, Ottawa, Ontario, Canada), then saved in the TIFF file format. The impression material area that was successfully digitized was calculated as a percentage of the total sample area, using Optimas 5.22 image processing software (Media Cybernetics, LP, Silver Spring, MD). The dependent variable was a Performance Value calculated for each material by averaging the percentage of area that digitized over the 3 angles. New samples with smooth and rough surfaces were made using the 7 impression materials with the largest Performance Values. These samples were tested as before, but with the additional angle of 60 degrees. Silky-Rock die stone (Whip Mix Corp, Louisville, KY) was used as a control. The Performance Values for the 17 impression materials ranged from 0% to 100%. The Performance Values for the 7 best materials were equivalent to the control at f/11 out to a surface angle of 45 degrees; however, only Examix impression material (GC America Inc, Alsip, IL) was equivalent to the control at f/11/\\16. At the 60 degrees surface angle with f/11/\\16, the Performance Values were 0% for all the impression materials, whereas that for the control was 90

  13. Clinical characteristics of an allergic reaction to a polyether dental impression material.

    Science.gov (United States)

    Rafael, Caroline Freitas; Liebermann, Anja

    2017-04-01

    Allergic and hypersensitivity reactions to dental impression materials may occur throughout dental treatment, with diverse manifestations from slight redness to severe pain and a burning mouth with total stomatitis. Patients are often unaware of these allergic reactions, which makes early identification of the cause almost impossible. In addition, symptoms usually begin after 24 hours and mostly in patients with a preexisting history of allergic responses. This report describes a patient with a suspected allergic reaction to a polyether dental impression material during prosthetic rehabilitation associated with a mandibular telescopic denture. Although instances of such occurrence are rare, clinicians need to be aware of these symptoms and select materials carefully for patients with a history of allergy. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

  14. Dimensional Accuracy of Hydrophilic and Hydrophobic VPS Impression Materials Using Different Impression Techniques - An Invitro Study

    Science.gov (United States)

    Pilla, Ajai; Pathipaka, Suman

    2016-01-01

    Introduction The dimensional stability of the impression material could have an influence on the accuracy of the final restoration. Vinyl Polysiloxane Impression materials (VPS) are most frequently used as the impression material in fixed prosthodontics. As VPS is hydrophobic when it is poured with gypsum products, manufacturers added intrinsic surfactants and marketed as hydrophilic VPS. These hydrophilic VPS have shown increased wettability with gypsum slurries. VPS are available in different viscosities ranging from very low to very high for usage under different impression techniques. Aim To compare the dimensional accuracy of hydrophilic VPS and hydrophobic VPS using monophase, one step and two step putty wash impression techniques. Materials and Methods To test the dimensional accuracy of the impression materials a stainless steel die was fabricated as prescribed by ADA specification no. 19 for elastomeric impression materials. A total of 60 impressions were made. The materials were divided into two groups, Group1 hydrophilic VPS (Aquasil) and Group 2 hydrophobic VPS (Variotime). These were further divided into three subgroups A, B, C for monophase, one-step and two-step putty wash technique with 10 samples in each subgroup. The dimensional accuracy of the impressions was evaluated after 24 hours using vertical profile projector with lens magnification range of 20X-125X illumination. The study was analyzed through one-way ANOVA, post-hoc Tukey HSD test and unpaired t-test for mean comparison between groups. Results Results showed that the three different impression techniques (monophase, 1-step, 2-step putty wash techniques) did cause significant change in dimensional accuracy between hydrophilic VPS and hydrophobic VPS impression materials. One-way ANOVA disclosed, mean dimensional change and SD for hydrophilic VPS varied between 0.56% and 0.16%, which were low, suggesting hydrophilic VPS was satisfactory with all three impression techniques. However, mean

  15. WhatsApp: a telemedicine platform for facilitating remote oral medicine consultation and improving clinical examinations.

    Science.gov (United States)

    Petruzzi, Massimo; De Benedittis, Michele

    2016-03-01

    Increased use of smartphone and related software applications has created a new era in clinical data exchange among patients and clinicians. This study describes use of the smartphone-based application WhatsApp to share clinical oral medicine information. Clinical images and related questions were submitted by general dentists, physicians, dental hygienists, and patients to the authors via WhatsApp. For each submission, a clinical impression was made and categorized as traumatic, infective, neoplastic, autoimmune, or unclassified. Submissions were summarized by sender type, number of photographs per sender, and category of question. Patients were invited to undergo a clinical examination with biopsy, when indicated. The telemedicine impression was compared to the clinicopathologic diagnosis. Three hundred and thirty-nine images were received for 96 patients; 92 (95.8%) patients underwent clinicopathologic examination, and 45 (49%) received a biopsy. General dentists (62%) and dental hygienists (26%) were the most frequent senders. The most common question was related to diagnosis (56%). The telemedicine impression agreed with the clinicopathologic assessment for 82% of cases. Telemedicine applications, such as WhatsApp, can support communication about oral conditions among clinicians and patients. Telemedicine consultation reduced geographic barriers to initial clinical consultation and encouraged the significant majority of patients to pursue expert clinical examination. Copyright © 2016 Elsevier Inc. All rights reserved.

  16. The Clinical Nurse Leader--new nursing role with global implications.

    Science.gov (United States)

    Baernholdt, M; Cottingham, S

    2011-03-01

    This paper describes the development of the Clinical Nurse Leader (CNL ©) role and education, the CNL's impact and potential to improve quality globally. The need for clinical nurse leadership to improve the quality of health care systems while controlling costs is recognized in reports internationally. In the USA, a new nursing role, the CNL, was developed in response to such reports. CNLs are master's level nurse graduates (although not necessarily recruited from a nursing background) with the skills and knowledge to create change within complex systems and improve outcomes while they remain direct care providers. This innovative role can be adapted worldwide to improve the quality of health care systems. © 2010 The Authors. International Nursing Review © 2010 International Council of Nurses.

  17. Effects of implant system, impression technique, and impression material on accuracy of the working cast.

    Science.gov (United States)

    Wegner, Kerstin; Weskott, Katharina; Zenginel, Martha; Rehmann, Peter; Wöstmann, Bernd

    2013-01-01

    This in vitro study aimed to identify the effects of the implant system, impression technique, and impression material on the transfer accuracy of implant impressions. The null hypothesis tested was that, in vitro and within the parameters of the experiment, the spatial relationship of a working cast to the placement of implants is not related to (1) the implant system, (2) the impression technique, or (3) the impression material. A steel maxilla was used as a reference model. Six implants of two different implant systems (Standard Plus, Straumann; Semados, Bego) were fixed in the reference model. The target variables were: three-dimensional (3D) shift in all directions, implant axis direction, and rotation. The target variables were assessed using a 3D coordinate measuring machine, and the respective deviations of the plaster models from the nominal values of the reference model were calculated. Two different impression techniques (reposition/pickup) and four impression materials (Aquasil Ultra, Flexitime, Impregum Penta, P2 Magnum 360) were investigated. In all, 80 implant impressions for each implant system were taken. Statistical analysis was performed using multivariate analysis of variance. The implant system significantly influenced the transfer accuracy for most spatial dimensions, including the overall 3D shift and implant axis direction. There was no significant difference between the two implant systems with regard to rotation. Multivariate analysis of variance showed a significant effect on transfer accuracy only for the implant system. Within the limits of the present study, it can be concluded that the transfer accuracy of the intraoral implant position on the working cast is far more dependent on the implant system than on the selection of a specific impression technique or material.

  18. Comparison of Accuracy Between a Conventional and Two Digital Intraoral Impression Techniques.

    Science.gov (United States)

    Malik, Junaid; Rodriguez, Jose; Weisbloom, Michael; Petridis, Haralampos

    To compare the accuracy (ie, precision and trueness) of full-arch impressions fabricated using either a conventional polyvinyl siloxane (PVS) material or one of two intraoral optical scanners. Full-arch impressions of a reference model were obtained using addition silicone impression material (Aquasil Ultra; Dentsply Caulk) and two optical scanners (Trios, 3Shape, and CEREC Omnicam, Sirona). Surface matching software (Geomagic Control, 3D Systems) was used to superimpose the scans within groups to determine the mean deviations in precision and trueness (μm) between the scans, which were calculated for each group and compared statistically using one-way analysis of variance with post hoc Bonferroni (trueness) and Games-Howell (precision) tests (IBM SPSS ver 24, IBM UK). Qualitative analysis was also carried out from three-dimensional maps of differences between scans. Means and standard deviations (SD) of deviations in precision for conventional, Trios, and Omnicam groups were 21.7 (± 5.4), 49.9 (± 18.3), and 36.5 (± 11.12) μm, respectively. Means and SDs for deviations in trueness were 24.3 (± 5.7), 87.1 (± 7.9), and 80.3 (± 12.1) μm, respectively. The conventional impression showed statistically significantly improved mean precision (P < .006) and mean trueness (P < .001) compared to both digital impression procedures. There were no statistically significant differences in precision (P = .153) or trueness (P = .757) between the digital impressions. The qualitative analysis revealed local deviations along the palatal surfaces of the molars and incisal edges of the anterior teeth of < 100 μm. Conventional full-arch PVS impressions exhibited improved mean accuracy compared to two direct optical scanners. No significant differences were found between the two digital impression methods.

  19. Precision of guided scanning procedures for full-arch digital impressions in vivo.

    Science.gov (United States)

    Zimmermann, Moritz; Koller, Christina; Rumetsch, Moritz; Ender, Andreas; Mehl, Albert

    2017-11-01

    System-specific scanning strategies have been shown to influence the accuracy of full-arch digital impressions. Special guided scanning procedures have been implemented for specific intraoral scanning systems with special regard to the digital orthodontic workflow. The aim of this study was to evaluate the precision of guided scanning procedures compared to conventional impression techniques in vivo. Two intraoral scanning systems with implemented full-arch guided scanning procedures (Cerec Omnicam Ortho; Ormco Lythos) were included along with one conventional impression technique with irreversible hydrocolloid material (alginate). Full-arch impressions were taken three times each from 5 participants (n = 15). Impressions were then compared within the test groups using a point-to-surface distance method after best-fit model matching (OraCheck). Precision was calculated using the (90-10%)/2 quantile and statistical analysis with one-way repeated measures ANOVA and post hoc Bonferroni test was performed. The conventional impression technique with alginate showed the lowest precision for full-arch impressions with 162.2 ± 71.3 µm. Both guided scanning procedures performed statistically significantly better than the conventional impression technique (p Cerec Omnicam Ortho were 74.5 ± 39.2 µm and for group Ormco Lythos 91.4 ± 48.8 µm. The in vivo precision of guided scanning procedures exceeds conventional impression techniques with the irreversible hydrocolloid material alginate. Guided scanning procedures may be highly promising for clinical applications, especially for digital orthodontic workflows.

  20. Does participation in a weight control program also improve clinical and functional outcomes for Chinese patients with schizophrenia treated with olanzapine?

    Directory of Open Access Journals (Sweden)

    Montgomery W

    2014-07-01

    Full Text Available William Montgomery,1 Tamas Treuer,2 Wenyu Ye,3 Hai Bo Xue,4 Sheng Hu Wu,4 Li Liu,4 Zbigniew Kadziola,5 Michael D Stensland,6 Haya Ascher-Svanum7 1Global Health Outcomes Eli Lilly Australia Pty Ltd, West Ryde, NSW, Australia; 2Neuroscience Research, Eli Lilly and Company, Budapest, Hungary; 3Global Statistical Sciences, Lilly Suzhou Pharmaceutical Company, Ltd, Shanghai, People's Republic of China; 4Medical Department, Lilly Suzhou Pharmaceutical Company, Ltd, Shanghai, People's Republic of China; 5Global Statistical Sciences, Eli Lilly GmbH, Vienna, Republic of Austria; 6Agile Outcomes Research, Inc., Rochester, MN, USA; 7Global Health Outcomes, Eli Lilly and Company, Indianapolis, IN, USA Objectives: This study examined whether participation in a weight control program (WCP by patients with schizophrenia treated with olanzapine was also associated with improvements in clinical and functional outcomes. Methods: A post-hoc analysis was conducted using data from the Chinese subgroup (n=330 of a multi-country, 6-month, prospective, observational study of outpatients with schizophrenia who initiated or switched to oral olanzapine. At study entry and monthly visits, participants were assessed with the Clinical Global Impression of Severity, and measures of patient insight, social activities, and work impairment. The primary comparison was between the 153 patients who participated in a WCP at study entry (n=93 or during the study (n=60 and the 177 patients who did not participate in a weight control program (non-WCP. Mixed Models for Repeated Measures with baseline covariates were used to compare outcomes over time. Kaplan–Meier survival analysis was used to assess time to response. Results: Participants had a mean age of 29.0 years and 29.3 years, and 51.0% and 57.6% were female for WCP and non-WCP groups, respectively. Average initiated daily dose for olanzapine was 9.5±5.4 mg. WCP participants gained less weight than non-participants (3.9 kg vs

  1. Antimicrobial Property of Hydrocolloid Impression Material Incorporated with Silver Nanoparticles Against Staphylococcus Aureus

    Directory of Open Access Journals (Sweden)

    Wangchuk Norbu Penden

    2017-01-01

    Full Text Available Dental impressions can easily become contaminated with patient’s blood and saliva which are capable of transmitting infectious diseases to dental personnel. The addition of antimicrobial agents into impression materials could be effective in reducing the chances of cross-infection. Silver nanoparticles have been applied in dentistry as a potent antimicrobial agent. This study aims to evaluate the in vitro antimicrobial efficacy of silver nanoparticles incorporated to irreversible hydrocolloid impression material against Staphylococcus aureus. Silver nanoparticles (AgZrPO4, National Direct Network Company, Thailand at concentrations of 0.25%, 0.50%, 1.00% and 1.50% w/w were added to powder of impression materials (Kromopan, Lascod, Ilaty. Impression material samples were prepared on sterile plate in accordance with manufacturer’s instruction. After setting, a 100 microliter of S. aureus ATCC6538 suspension (106 cells/mL were inoculated on the surface of the impression sample and left for 10 minutes. The amount of S. aureus on the surface was quantified using imprint technique on Mannitol Salt agar. Impression materials incorporated with AgZrPO4 showed antimicrobial property against S. aureus (up to 95% reduction compared with control (impression material without AgZrPO4. Even though the mechanism of antimicrobial action was not clearly understood, AgZrPO4 incorporated to impression material was demonstrated to possess an inhibitory effect against pathogenic bacteria. Further studies are needed to investigate physical properties of the material and the clinical usage.

  2. Ventral impressions on the hypopharynx

    International Nuclear Information System (INIS)

    Daschner, H.; Hannig, C.

    1991-01-01

    Two impressions can be seen on the ventral aspect of the hypopharynx and upper oesophagus; on static images it is difficult to differentiate these from small tumours. In order to evaluate this region more accurately, we have examined 150 patients by means of rapid rate cinematography. In 52.6% we found a constant irregular or convex impression formed by the cricoid; in the other cases this was not seen or was quite minimal. In 93% a sub-cricoid impression could be demonstrated which was due to lax mucosa. Characteristically this showed a variable appearance during the passage of a bolus. Only the cricoid impression was associated with dysphagia. (orig.) [de

  3. The Historical Evolution of Dental Impression Materials.

    Science.gov (United States)

    Papadiochos, Ioannis; Papadiochou, Sofia; Emmanouil, Ioannis

    The concept of impression making process in dentistry began in the mid 1800s. Dentists realized that the construction of a prosthetic restoration required both a detailed capture of the oral tissues along with stone cast fabrications. To accomplish these goals, impression materials were essential. Beeswax represents the first impression material, while important bechmarks during the historical evolution of dental impression materials are considered to be the introduction of dental trays in the early 1800s and the invention of the gutta-percha, thermoplastic resins and plaster of Paris. The double (corrective) impression technique, along with the functional impression concept that was established after mid 1800s, are also identified as pivotal innovations. During the 20th century, the advances in material development slowed significantly since the majority of the current impression materials had already been invented. However, the introduction of elastomeric impression materials in the field of prosthodontics that offered the advantages of accuracy and dimensional stability substantially upgraded both the impression accuracy and the quality of the final restoration. Presently, the dental practitioner has access to a variety of impression materials and should be aware of their properties, indications and limitations as well. Futhermore, while continuous attempts are being made to enhance these materials, the ideal impression material has yet to be developed. The purpose of this article was to provide a comprehensive review about the historical development of impression dental materials. Copyright American Academy of the History of Dentistry.

  4. Accounting Narratives and Impression Management

    OpenAIRE

    Brennan, Niamh; Merkl-Davies, Doris M.

    2013-01-01

    This chapter focuses on impression management in accounting communication. Impression management entails the construction of an impression by organisations with the intention to appeal to their audiences, including shareholders, stakeholders, the general public, and the media. If successful, it undermines the quality of financial reporting and capital misallocations may result. What is more, wider social and political consequences include unwarranted support by non-financial...

  5. Improvement of autism spectrum disorder symptoms in three children by using gastrin-releasing peptide,

    Directory of Open Access Journals (Sweden)

    Michele Michelin Becker

    2016-06-01

    Full Text Available Abstract Objective: To evaluate the safety, tolerability and potential therapeutic effects of gastrin-releasing peptide in three children with autistic spectrum disorder. Methods: Case series study with the intravenous administration of gastrin-releasing peptide in the dose of 160 pmol/kg for four consecutive days. To evaluate the results, parental impressions the Childhood Autism Rating Scale (CARS and the Clinical Global Impression (CGI Scale. Each child underwent a new peptide cycle after two weeks. The children were followed for four weeks after the end of the infusions. Results: The gastrin-releasing peptide was well tolerated and no child had adverse effects. Two children had improved social interaction, with a slight improvement in joint attention and the interaction initiatives. Two showed reduction of stereotypes and improvement in verbal language. One child lost his compulsion to bathe, an effect that lasted two weeks after each infusion cycle. Average reduction in CARS score was 2.8 points. CGI was "minimally better" in two children and "much better" in one. Conclusions: This study suggests that the gastrin-releasing peptide is safe and may be effective in improving key symptoms of autism spectrum disorder, but its results should be interpreted with caution. Controlled clinical trials-randomized, double-blinded, and with more children-are needed to better evaluate the possible therapeutic effects of gastrin-releasing peptide in autism.

  6. Redesign of a fixture mount to be used as an impression coping and a provisional abutment as well

    Directory of Open Access Journals (Sweden)

    Glenn Hsuan-Chen Chang

    2011-01-01

    Full Text Available Purpose: An integrated fixture mount/impression coping/ temporary abutment can provide many advantages for immediate loading of dental implants, such as simpler procedure, less chair time, cost reduction, and comfort for the patients. Materials and Methods: A newly designed dental implant fixture mount (DIFMA can be used as an impression coping for taking an immediate impression. An immediate load provisional prosthesis can then be fabricated shortly after implant placement to immediately load the implants. This fixture mount can also serve as a temporary abutment for immediate chair-side fabrication of provisional prosthesis. Two clinical cases are presented. Results: A clinical case utilizing the fixture mount abutment (DIFMA/implant assembly is presented. The precision of fitting between the impression copings and implants is secured with this system. The chair time for taking an immediate impression is greatly reduced. Less cost for the restoration is provided and patient comfort is delivered. Conclusions: More patient satisfaction can be conferred by employing the fixture mount in the process of immediate impression taking and as an immediate provisional abutment.

  7. Evaluation of different approaches for using a laser scanner in digitization of dental impressions.

    Science.gov (United States)

    Lee, Wan-Sun; Kim, Woong-Chul; Kim, Hae-Young; Kim, Wook-Tae; Kim, Ji-Hwan

    2014-02-01

    This study aimed to investigate the potential clinical application of digitized silicone rubber impressions by comparing the accuracy of zirconia 3-unit fixed partial dentures (FPDs) fabricated from 2 types of data (working model and impression) obtained from a laser scanner. Ten working models and impressions were prepared with epoxy resin and vinyl polysiloxane, respectively. Based on the data obtained from the laser scanner (D-700; 3Shape A/S, Copenhagen, Denmark), a total of 20 zirconia frameworks were prepared using a dental CAD/CAM system (DentalDesigner; 3shape A/S, Copenhagen, Denmark / Ener-mill, Dentaim, Seoul, Korea). The silicone replicas were sectioned into four pieces to evaluate the framework fit. The replicas were imaged using a digital microscope, and the fit of the reference points (P1, P2, P3, P4, P5, P6, and P7) were measured using the program in the device. Measured discrepancies were divided into 5 categories of gaps (MG, CG, AWG, AOTG, OG). Data were analyzed with Student's t-test (α=0.05), repeated measures ANOVA and two-way ANOVA (α=0.05). The mean gap of the zirconia framework prepared from the working models presented a narrower discrepancy than the frameworks fabricated from the impression bodies. The mean of the total gap in premolars (P=.003) and molars (P=.002) exhibited a statistical difference between two groups. The mean gap dimensions of each category showed statistically significant difference. Nonetheless, the digitized impression bodies obtained with a laser scanner were applicable to clinical settings, considering the clinically acceptable marginal fit (120 µm).

  8. Accuracy of Intraoral Digital Impressions for Whole Upper Jaws, Including Full Dentitions and Palatal Soft Tissues.

    Directory of Open Access Journals (Sweden)

    Ning Gan

    Full Text Available Intraoral digital impressions have been stated to meet the clinical requirements for some teeth-supported restorations, though fewer evidences were proposed for larger scanning range. The aim of this study was to compare the accuracy (trueness and precision of intraoral digital impressions for whole upper jaws, including the full dentitions and palatal soft tissues, as well as to determine the effect of different palatal vault height or arch width on accuracy of intraoral digital impressions. Thirty-two volunteers were divided into three groups according to the palatal vault height or arch width. Each volunteer received three scans with TRIOS intraoral scanner and one conventional impression of whole upper jaw. Three-dimensional (3D images digitized from conventional gypsum casts by a laboratory scanner were chose as the reference models. All datasets were imported to a specific software program for 3D analysis by "best fit alignment" and "3D compare" process. Color-coded deviation maps showed qualitative visualization of the deviations. For the digital impressions for palatal soft tissues, trueness was (130.54±33.95μm and precision was (55.26±11.21μm. For the digital impressions for upper full dentitions, trueness was (80.01±17.78μm and precision was (59.52±11.29μm. Larger deviations were found between intraoral digital impressions and conventional impressions in the areas of palatal soft tissues than that in the areas of full dentitions (p0.05, but arch width was found to have a significant effect on precision of intraoral digital impressions for full dentitions (p = 0.016. A linear correlation was found between arch width and precision of digital impressions for whole upper jaws (r = 0.326, p = 0.034 for palatal soft tissues and r = 0.485, p = 0.002 for full dentitions. It was feasible to use the intraoral scanner to obtain digital impressions for whole upper jaws. Wider dental arch contributed to lower precision of an intraoral

  9. Coalition for Global Clinical Surgical Education: The Alliance for Global Clinical Training.

    Science.gov (United States)

    Graf, Jahanara; Cook, Mackenzie; Schecter, Samuel; Deveney, Karen; Hofmann, Paul; Grey, Douglas; Akoko, Larry; Mwanga, Ali; Salum, Kitembo; Schecter, William

    Assessment of the effect of the collaborative relationship between the high-income country (HIC) surgical educators of the Alliance for Global Clinical Training (Alliance) and the low-income country surgical educators at the Muhimbili University of Health and Allied Sciences/Muhimbili National Hospital (MUHAS/MNH), Dar Es Salaam, Tanzania, on the clinical global surgery training of the HIC surgical residents participating in the program. A retrospective qualitative analysis of Alliance volunteer HIC faculty and residents' reports, volunteer case lists and the reports of Alliance academic contributions to MUHAS/MNH from 2012 to 2017. In addition, a survey was circulated in late 2016 to all the residents who participated in the program since its inception. Twelve HIC surgical educators provided rotating 1-month teaching coverage at MUHAS/MNH between academic years 2012 and 2017 for a total of 21 months. During the same time period 11 HIC residents accompanied the HIC faculty for 1-month rotations. HIC surgery residents joined the MUHAS/MNH Department of Surgery, made significant teaching contributions, performed a wide spectrum of "open procedures" including hand-sewn intestinal anastomoses. Most had had either no or limited previous exposure to hand-sewn anastomoses. All of the residents commented that this was a maturing and challenging clinical rotation due to the complexity of the cases, the limited resources available and the ethical and emotional challenges of dealing with preventable complications and death in a resource constrained environment. The Alliance provides an effective clinical global surgery rotation at MUHAS/MNH for HIC Surgery Departments wishing to provide such an opportunity for their residents and faculty. Copyright © 2017 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

  10. 21 CFR 872.6880 - Preformed impression tray.

    Science.gov (United States)

    2010-04-01

    ...) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6880 Preformed impression tray. (a) Identification. A preformed impression tray is a metal or plastic device intended to hold impression material... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Preformed impression tray. 872.6880 Section 872...

  11. [Study on the effect of different impression methods on the marginal fit of all-ceramic crowns].

    Science.gov (United States)

    Zhan, Lilin; Zeng, Liwei; Chen, Ping; Liao, Lan; Li, Shiyue; Liu, Renying

    2015-08-01

    To investigate the effect of three different impression methods on the marginal fit of all-ceramic crowns. The three methods include scanning silicone rubber impression, cast models, and direct optical impression. The polymethyl methacrylate (PMMA) material of a mandibular first molar in standard model was prepared with 16 models duplicated. The all-ceramic crowns were prepared using three different impression methods. Accurate impressions were made using silicone rubber, and the cast models were obtained. The PMMA models, silicone rubber impressions, and cast models were scanned, and digital models of three groups were obtained to produce 48 zirconia all-ceramic crowns with computer aided design/computer aided manufacture. The marginal fit of these groups was measured by silicone rubber gap impression. Statistical analysis was performed with SPSS 17.0 software. The marginal fit of direct optical impression groups, silicone rubber impression groups, cast model groups was (69.18±9.47), (81.04±10.88), (84.42±9.96) µm. A significant difference was observed in the marginal fit of the direct optical impression groups and the other groups (Pimpression groups and the cast model groups (P>0.05). All marginal measurement sites are clinically acceptable by the three different impression scanning methods. The silicone rubber impression scanning method can be used for all-ceramic restorations.

  12. How good are our impressions? An audit of alginate impression quality in the production of removable prostheses.

    Science.gov (United States)

    Horwitz, Richard

    2014-05-01

    Impressions are taken regularly in practice giving vital information to the dental laboratory, but are there quality assurance systems in place to make sure that they are up to a sufficient standard? As dental professionals we have to appreciate that dental technicians can only work with the information given to them. This makes the skill of taking a good impression vital in order for us as clinicians to provide prostheses of good quality. This paper outlines an audit of alginate impressions and their quality in the making of removable prostheses. To record the quality of impression taking, and how one's own ability to critique an impression may differ from that of our colleagues.

  13. Sulcus reproduction with elastomeric impression materials: a new in vitro testing method.

    Science.gov (United States)

    Finger, Werner J; Kurokawa, Rie; Takahashi, Hidekazu; Komatsu, Masashi

    2008-12-01

    Aim of this study was to investigate the depth reproduction of differently wide sulci with elastomeric impression materials by single- and double-mix techniques using a tooth and sulcus model, simulating clinical conditions. Impressions with one vinyl polysiloxane (VPS; FLE), two polyethers (PE; IMP and P2), and one hybrid VPS/PE elastomer (FUS) were taken from a truncated steel cone with a circumferential 2 mm deep sulcus, 50, 100 or 200 microm wide. The "root surface" was in steel and the "periodontal tissue" in reversible hydrocolloid. Single-mix impressions were taken with light-body (L) or monophase (M) pastes, double-mix impressions with L as syringe and M or heavy-body (H) as tray materials (n=8). Sulcus reproduction was determined by 3D laser topography of impressions at eight locations, 45 degrees apart. Statistical data analysis by ANOVA and multiple comparison tests (pimpression materials only: FLE=IMP>FUS=P2. At 50 and 100 microm width, significant differences were found between materials (IMP>FUS=FLE>P2) and techniques (L+H=L+M>M>L). The sulcus model is considered useful for screening evaluation of elastomeric impression materials ability to reproduce narrow sulci. All tested materials and techniques reproduced 200 microm wide sulci to almost nominal depth. Irrespective of the impression technique used, IMP showed the best penetration ability in 50 and 100 microm sulci. Double-mix techniques are more suitable to reproduce narrow sulci than single-mix techniques.

  14. Sulcus depth reproduction with polyvinyl siloxane impression material: effects of hydrophilicity and impression temperature.

    Science.gov (United States)

    Takahashi, Hidekazu; Finger, Werner J; Kurokawa, Rie; Furukawa, Masae; Komatsu, Masashi

    2010-03-01

    To determine the sulcus penetration ability of hydrophilic and hydrophobic polyvinyl siloxane (PVS) impression materials by impression technique, temperature, and sulcus width. Hydrophilic Flexitime (FLE; Heraeus Kulzer) and its hydrophobic counterpart (EXP) without surfactant were investigated, using light (L), monophase (M), and heavy (H) consistencies. A truncated steel cone surrounded by a 2-mm-deep and 50-, 100-, or 200-microm-wide sulcus, simulating the gingival tissue with agar, served as the test model. Impressions were made with single-mix (L or M) and double-mix (LM or LH) techniques at 23 degrees C and 37 degrees C, respectively. The reproduced sulcus heights were measured with a 3D laser scanner. Data were analyzed by ANOVA and Tukey HSD (P 1.9 mm); FLE-M, -LM, and-LH reproductions were shorter with narrow sulci. Reproductions of 50- and 100-microm sulci with EXP-L were shallower than with FLE-L. The shortest reproduction was, however, greater than 1.6 mm. In spite of some significant differences found in sulcus-reproducing ability with hydrophilic and hydrophobic impression materials applied at different impression-making temperatures and with different techniques, the practical relevance is limited.

  15. 21 CFR 872.3660 - Impression material.

    Science.gov (United States)

    2010-04-01

    ...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3660 Impression material. (a) Identification. Impression material is a device composed of materials such as alginate or polysulfide intended to be placed... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Impression material. 872.3660 Section 872.3660...

  16. 21 CFR 872.6570 - Impression tube.

    Science.gov (United States)

    2010-04-01

    ... DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6570 Impression tube. (a) Identification. An impression tube is a device consisting of a hollow copper tube intended to take an impression of a single tooth...) Classification. Class I (general controls). The device is exempt from the premarket notification procedures in...

  17. Two-piece impression procedure for implant-retained orbital prostheses.

    Science.gov (United States)

    Ozcelik, Tuncer Burak; Yilmaz, Burak

    2012-01-01

    Obtaining an accurate impression of facial tissues with undercuts and extraoral implants has always been a challenge for both clinicians and patients. This report describes a three-step, two-piece technique that enables an accurate and comfortable impression of undercut tissues and extraoral implants in an orbital defect. An impression of the basal tissue surface of the defect area was made using a medium-body polyether impression material followed by an impression of the entire face of the patient made with a polyvinyl siloxane (PVS) impression material. First, the PVS impression material was removed; second, the impression posts were removed from the magnets; and third, the polyether impression was removed from the defect. The impression posts were attached to the implant analogs and placed in the negative spaces in the polyether impression. The polyether impression, which carries the implant analogs and impression posts, was placed in the PVS impression through the negative spaces. This technique minimizes trauma to the soft tissues and implants during impression making and also does not require additional materials.

  18. Accuracy of Intraoral Digital Impressions for Whole Upper Jaws, Including Full Dentitions and Palatal Soft Tissues.

    Science.gov (United States)

    Gan, Ning; Xiong, Yaoyang; Jiao, Ting

    2016-01-01

    Intraoral digital impressions have been stated to meet the clinical requirements for some teeth-supported restorations, though fewer evidences were proposed for larger scanning range. The aim of this study was to compare the accuracy (trueness and precision) of intraoral digital impressions for whole upper jaws, including the full dentitions and palatal soft tissues, as well as to determine the effect of different palatal vault height or arch width on accuracy of intraoral digital impressions. Thirty-two volunteers were divided into three groups according to the palatal vault height or arch width. Each volunteer received three scans with TRIOS intraoral scanner and one conventional impression of whole upper jaw. Three-dimensional (3D) images digitized from conventional gypsum casts by a laboratory scanner were chose as the reference models. All datasets were imported to a specific software program for 3D analysis by "best fit alignment" and "3D compare" process. Color-coded deviation maps showed qualitative visualization of the deviations. For the digital impressions for palatal soft tissues, trueness was (130.54±33.95)μm and precision was (55.26±11.21)μm. For the digital impressions for upper full dentitions, trueness was (80.01±17.78)μm and precision was (59.52±11.29)μm. Larger deviations were found between intraoral digital impressions and conventional impressions in the areas of palatal soft tissues than that in the areas of full dentitions (pimpressions for palatal soft tissues was slightly better than that for full dentitions (p = 0.049). There was no significant effect of palatal vault height on accuracy of digital impressions for palatal soft tissues (p>0.05), but arch width was found to have a significant effect on precision of intraoral digital impressions for full dentitions (p = 0.016). A linear correlation was found between arch width and precision of digital impressions for whole upper jaws (r = 0.326, p = 0.034 for palatal soft tissues and r

  19. Accuracy of Intraoral Digital Impressions for Whole Upper Jaws, Including Full Dentitions and Palatal Soft Tissues

    Science.gov (United States)

    Gan, Ning; Xiong, Yaoyang; Jiao, Ting

    2016-01-01

    Intraoral digital impressions have been stated to meet the clinical requirements for some teeth-supported restorations, though fewer evidences were proposed for larger scanning range. The aim of this study was to compare the accuracy (trueness and precision) of intraoral digital impressions for whole upper jaws, including the full dentitions and palatal soft tissues, as well as to determine the effect of different palatal vault height or arch width on accuracy of intraoral digital impressions. Thirty-two volunteers were divided into three groups according to the palatal vault height or arch width. Each volunteer received three scans with TRIOS intraoral scanner and one conventional impression of whole upper jaw. Three-dimensional (3D) images digitized from conventional gypsum casts by a laboratory scanner were chose as the reference models. All datasets were imported to a specific software program for 3D analysis by "best fit alignment" and "3D compare" process. Color-coded deviation maps showed qualitative visualization of the deviations. For the digital impressions for palatal soft tissues, trueness was (130.54±33.95)μm and precision was (55.26±11.21)μm. For the digital impressions for upper full dentitions, trueness was (80.01±17.78)μm and precision was (59.52±11.29)μm. Larger deviations were found between intraoral digital impressions and conventional impressions in the areas of palatal soft tissues than that in the areas of full dentitions (pimpressions for palatal soft tissues was slightly better than that for full dentitions (p = 0.049). There was no significant effect of palatal vault height on accuracy of digital impressions for palatal soft tissues (p>0.05), but arch width was found to have a significant effect on precision of intraoral digital impressions for full dentitions (p = 0.016). A linear correlation was found between arch width and precision of digital impressions for whole upper jaws (r = 0.326, p = 0.034 for palatal soft tissues and r

  20. Students’ Impression towards Science Virtual Test (SVT) on Digestive System Topic

    Science.gov (United States)

    Mahfira, C.; Sanjaya, Y.; Rusyati, L.

    2018-05-01

    During the past few years, technology has significantly support the improvements in assessment.Computer-based test (CBT) comes up as a new type of assessment which offers many benefits. The implementation of computer-based test in term of students’ perspective gives rise to numbers of mixed reactions. Students’ impression is one of the essential things for the implementation of SVT. The purpose of this study was to investigate the impression of students toward SVT. The method used in this research was descriptive method. The participant was 98 students from Junior High School “X” in East Bandung. Students’ impression questionnaire was used as the instrument. There are four aspects tested in this instrument which are students’ experience, technical activity, preference and media of SVT. The result shows that SVT generally gives positive impression to students. Students have a positive experience and did not encounter significant problem when implementing SVT. Students prefer to use SVT and students think the media of SVT is already good.

  1. Passive fit and accuracy of three dental implant impression techniques.

    Science.gov (United States)

    Al Quran, Firas A; Rashdan, Bashar A; Zomar, AbdelRahman A Abu; Weiner, Saul

    2012-02-01

    To reassess the accuracy of three impression techniques relative to the passive fit of the prosthesis. An edentulous maxillary cast was fabricated in epoxy resin with four dental implants embedded and secured with heat-cured acrylic resin. Three techniques were tested: closed tray, open tray nonsplinted, and open tray splinted. One light-cured custom acrylic tray was fabricated for each impression technique, and transfer copings were attached to the implants. Fifteen impressions for each technique were prepared with medium-bodied consistency polyether. Subsequently, the impressions were poured in type IV die stone. The distances between the implants were measured using a digital micrometer. The statistical analysis of the data was performed with ANOVA and a one-sample t test at a 95% confidence interval. The lowest mean difference in dimensional accuracy was found within the direct (open tray) splinted technique. Also, the one-sample t test showed that the direct splinted technique has the least statistical significant difference from direct nonsplinted and indirect (closed tray) techniques. All discrepancies were less than 100 Μm. Within the limitations of this study, the best accuracy of the definitive prosthesis was achieved when the impression copings were splinted with autopolymerized acrylic resin, sectioned, and rejoined. However, the errors associated with all of these techniques were less than 100 Μm, and based on the current definitions of passive fit, they all would be clinically acceptable.

  2. Disinfection of dental impressions - compliance to accepted standards.

    Science.gov (United States)

    Almortadi, N; Chadwick, R G

    2010-12-18

    The responsibility of ensuring impressions have been cleaned and disinfected before dispatch to the dental laboratory lies solely with the dentist. Uncertainty of impression disinfection risks both the health of the receiving dental technician and potential repeat disinfection of an already disinfected impression with detrimental consequences for its dimensions. To ascertain, from the perspectives of dentists and dental technicians, current impression decontamination and disinfection practices with, in the case of the technicians, an estimate of the relative prevalence of contaminated voids within apparently disinfected impressions. Anonymous postal questionnaire. Dentist (n = 200) and dental technician (n = 200) potential participants, selected at random from the registers held by the General Dental Council, were invited to complete an anonymous postal questionnaire that sought to establish current practices and perceived effectiveness of impression disinfection. Questionnaire return rates of 42.1% and 31.2% were recorded for dentists and dental technicians respectively. A wide range of solutions, at different dilutions of the same product, was used by the dentists to disinfect dental impressions. 37.2% rinsed the impressions with water, and 2.6% always brushed debris away, before disinfection. 24.7% of dentists did not inform the laboratory of disinfection. Irrespective of the disinfection status of the received impressions, 50% of the responding dental technicians disinfected all impressions. 95% of them had received blood-contaminated impressions. 15% had encountered blood-filled voids upon trimming back the peripheries of impressions. 64.7% were confident that the impressions received by them had been disinfected by the dentists. Compliance with good practice is less than ideal and education in impression disinfection for both dentists and dental technicians is required to address this.

  3. Global Trends in Alzheimer Disease Clinical Development: Increasing the Probability of Success.

    Science.gov (United States)

    Sugino, Haruhiko; Watanabe, Akihito; Amada, Naoki; Yamamoto, Miho; Ohgi, Yuta; Kostic, Dusan; Sanchez, Raymond

    2015-08-01

    Alzheimer disease (AD) is a growing global health and economic issue as elderly populations increase dramatically across the world. Despite the many clinical trials conducted, currently no approved disease-modifying treatment exists. In this commentary, the present status of AD drug development and the grounds for collaborations between government, academia, and industry to accelerate the development of disease-modifying AD therapies are discussed. Official government documents, literature, and news releases were surveyed by MEDLINE and website research. Currently approved anti-AD drugs provide only short-lived symptomatic improvements, which have no effect on the underlying pathogenic mechanisms or progression of the disease. The failure to approve a disease-modifying drug for AD may be because the progression of AD in the patient populations enrolled in clinical studies was too advanced for drugs to demonstrate cognitive and functional improvements. The US Food and Drug Administration and the European Medicines Agency recently published draft guidance for industry which discusses approaches for conducting clinical studies with patients in early AD stages. For successful clinical trials in early-stage AD, however, it will be necessary to identify biomarkers highly correlated with the clinical onset and the longitudinal progress of AD. In addition, because of the high cost and length of clinical AD studies, support in the form of global initiatives and collaborations between government, industry, and academia is needed. In response to this situation, national guidance and international collaborations have been established. Global initiatives are focusing on 2025 as a goal to provide new treatment options, and early signs of success in biomarker and drug development are already emerging. Copyright © 2015 Elsevier HS Journals, Inc. All rights reserved.

  4. Digital Dentistry — Digital Impression and CAD/CAM System Applications

    Directory of Open Access Journals (Sweden)

    Gabor Alin-Gabriel

    2017-03-01

    Full Text Available Digital imprint and computer-aided design/computer-aided manufacture (CAD/CAM systems offer several benefits compared to traditional techniques. The use of a CAD/CAM system to scan preparations and generate restorations in-office, removes a second appointment for the patient. The existence of precision benefits in using complete systems and chairside scanning systems, has been proven. CAD/CAM restorations have a good longevity and meet the accepted clinical parameters. New digital impression methods are presently accessible, and before long, the long-awaited goal of sparing patients of one the most unpleasant practices in clinical dentistry, acquiring dental impressions, will be exchanged by intraoral digital scanning. CAD/CAM systems existing nowadays, can feed data through accurate digital scans created from plaster models, straight to manufacturing systems that can shape ceramic or resin restorations with no requirement of a physical copy of the prepared, adjacent, and antagonist teeth.

  5. Development of a digital impression procedure using photogrammetry for complete denture fabrication.

    Science.gov (United States)

    Matsuda, Takashi; Goto, Takaharu; Kurahashi, Kosuke; Kashiwabara, Toshiya; Ichikawa, Tetsuo

    We developed an innovative procedure for digitizing maxillary edentulous residual ridges with a photogrammetric system capable of estimating three-dimensional (3D) digital forms from multiple two-dimensional (2D) digital images. The aim of this study was to validate the effectiveness of the photogrammetric system. Impressions of the maxillary residual ridges of five edentulous patients were taken with four kinds of procedures: three conventional impression procedures and the photogrammetric system. Plaster models were fabricated from conventional impressions and digitized with a 3D scanner. Two 3D forms out of four forms were superimposed with 3D inspection software, and differences were evaluated using a least squares best fit algorithm. The in vitro experiment suggested that better imaging conditions were in the horizontal range of ± 15 degrees and at a vertical angle of 45 degrees. The mean difference between the photogrammetric image (Form A) and the image taken from conventional preliminarily impression (Form C) was 0.52 ± 0.22 mm. The mean difference between the image taken of final impression through a special tray (Form B) and Form C was 0.26 ± 0.06 mm. The mean difference between the image taken from conventional final impression (Form D) and Form C was 0.25 ± 0.07 mm. The difference between Forms A and C was significantly larger than the differences between Forms B and C and between Forms D and C. The results of this study suggest that obtaining digital impressions of edentulous residual ridges using a photogrammetric system is feasible and available for clinical use.

  6. Impression management as symbolic capital

    DEFF Research Database (Denmark)

    Lueg, Klarissa; Nielsen, Camilla

    2015-01-01

    in Germany and LinkedIn in Denmark. We summarize those differences and relate them to different cultural contexts and impression management practices. Our sample consists of Danish Higher Executives (HEs)/managers (e.g., CEOs) and companies that have profiles on both SNS, thus reaching out to both the German......Social Network Sites (SNS) play an increasingly important role in the European business world, especially with respect to cross-cultural impression management. Departing from the Bourdieusian concept of “capital,” this paper analyzes the differences in the use of two popular business SNS: XING...... and the Danish markets. It is apparent that even business experts operating in both markets could better adapt to the standards and possibilities offered by the German SNS with respect to impression management. We introduce a set of recommendations to foster SNS-related and culture-sensitive impression...

  7. Minimal clinically important difference on the Motor Examination part of MDS-UPDRS.

    Science.gov (United States)

    Horváth, Krisztina; Aschermann, Zsuzsanna; Ács, Péter; Deli, Gabriella; Janszky, József; Komoly, Sámuel; Balázs, Éva; Takács, Katalin; Karádi, Kázmér; Kovács, Norbert

    2015-12-01

    Recent studies increasingly utilize the Movement Disorders Society Sponsored Unified Parkinson's Disease Rating Scale (MDS-UPDRS). However, the minimal clinically important difference (MCID) has not been fully established for MDS-UPDRS yet. To assess the MCID thresholds for MDS-UPDRS Motor Examination (Part III). 728 paired investigations of 260 patients were included. At each visit both MDS-UPDRS and Clinician-reported Global Impression-Improvement (CGI-I) scales were assessed. MDS-UPDRS Motor Examination (ME) score changes associated with CGI-I score 4 (no change) were compared with MDS-UPDRS ME score changes associated with CGI-I score 3 (minimal improvement) and CGI-I score 5 (minimal worsening). Both anchor- and distribution-based techniques were utilized to determine the magnitude of MCID. The MCID estimates for MDS-UPDRS ME were asymmetric: -3.25 points for detecting minimal, but clinically pertinent, improvement and 4.63 points for observing minimal, but clinically pertinent, worsening. MCID is the smallest change of scores that are clinically meaningful to patients. These MCID estimates may allow the judgement of a numeric change in MDS-UPDRS ME on its clinical importance. Copyright © 2015 Elsevier Ltd. All rights reserved.

  8. [Study of the appearance difference of lower complete denture between functional and anatomic impression techniques].

    Science.gov (United States)

    Zhong, Qun; Wu, Xue-yin; Shen, Qing-yi; Shen, Qing-ping

    2012-04-01

    To compare the difference in oblique external ridge, oblique internal ridge and alveolar process crest of lower complete denture base made through functional impression and anatomic impression techniques. Fifteen patients were chosen to treat with two kinds of complete dentures through functional impression and anatomic impression technique respectively. 3D laser scanner was used to scan the three-dimensional model of the denture base and the differences of the surface structural between two techniques in alveolar process crest, external and internal oblique ridges were analyzed, using paired t test with SPSS 12.0 software package. Between the two techniques, there were significant differences in the areas of internal and external oblique ridge(P0.05). The results explain why there is less tenderness when functional impression technique is applied. The differences measured also indicate that sufficient buffering should be made in external and internal oblique ridge areas in clinic.

  9. Impression Management and Entrepreneurial Experience

    DEFF Research Database (Denmark)

    Halbinger, Maria; Reichstein, Toke

    2016-01-01

    into entrepreneurship. Analyzing individual-level data collected through online survey, field studies and experiments in hacker-and makerspaces, we find that impression management behavior that focuses others, i.e. accommodative impression management is positively associated with entrepreneurial experience while self...

  10. Evaluation of accuracy of complete-arch multiple-unit abutment-level dental implant impressions using different impression and splinting materials.

    Science.gov (United States)

    Buzayan, Muaiyed; Baig, Mirza Rustum; Yunus, Norsiah

    2013-01-01

    This in vitro study evaluated the accuracy of multiple-unit dental implant casts obtained from splinted or nonsplinted direct impression techniques using various splinting materials by comparing the casts to the reference models. The effect of two different impression materials on the accuracy of the implant casts was also evaluated for abutment-level impressions. A reference model with six internal-connection implant replicas placed in the completely edentulous mandibular arch and connected to multi-base abutments was fabricated from heat-curing acrylic resin. Forty impressions of the reference model were made, 20 each with polyether (PE) and polyvinylsiloxane (PVS) impression materials using the open tray technique. The PE and PVS groups were further subdivided into four subgroups of five each on the bases of splinting type: no splinting, bite registration PE, bite registration addition silicone, or autopolymerizing acrylic resin. The positional accuracy of the implant replica heads was measured on the poured casts using a coordinate measuring machine to assess linear differences in interimplant distances in all three axes. The collected data (linear and three-dimensional [3D] displacement values) were compared with the measurements calculated on the reference resin model and analyzed with nonparametric tests (Kruskal-Wallis and Mann-Whitney). No significant differences were found between the various splinting groups for both PE and PVS impression materials in terms of linear and 3D distortions. However, small but significant differences were found between the two impression materials (PVS, 91 μm; PE, 103 μm) in terms of 3D discrepancies, irrespective of the splinting technique employed. Casts obtained from both impression materials exhibited differences from the reference model. The impression material influenced impression inaccuracy more than the splinting material for multiple-unit abutment-level impressions.

  11. Examination of the Position Accuracy of Implant Abutments Reproduced by Intra-Oral Optical Impression

    Science.gov (United States)

    Odaira, Chikayuki; Kobayashi, Takuya; Kondo, Hisatomo

    2016-01-01

    An impression technique called optical impression using intraoral scanner has attracted attention in digital dentistry. This study aimed to evaluate the accuracy of the optical impression, comparing a virtual model reproduced by an intraoral scanner to a working cast made by conventional silicone impression technique. Two implants were placed on a master model. Working casts made of plaster were fabricated from the master model by silicone impression. The distance between the ball abutments and the angulation between the healing abutments of 5 mm and 7 mm height at master model were measured using Computer Numerical Control Coordinate Measuring Machine (CNCCMM) as control. Working casts were then measured using CNCCMM, and virtual models via stereo lithography data of master model were measured by a three-dimensional analyzing software. The distance between ball abutments of the master model was 9634.9 ± 1.2 μm. The mean values of trueness of the Lava COS and working casts were 64.5 μm and 22.5 μm, respectively, greater than that of control. The mean of precision values of the Lava COS and working casts were 15.6 μm and 13.5 μm, respectively. In the case of a 5-mm-height healing abutment, mean angulation error of the Lava COS was greater than that of the working cast, resulting in significant differences in trueness and precision. However, in the case of a 7-mm-height abutment, mean angulation errors of the Lava COS and the working cast were not significantly different in trueness and precision. Therefore, distance errors of the optical impression were slightly greater than those of conventional impression. Moreover, the trueness and precision of angulation error could be improved in the optical impression using longer healing abutments. In the near future, the development of information technology could enable improvement in the accuracy of the optical impression with intraoral scanners. PMID:27706225

  12. High-resolution MR imaging for dental impressions: a feasibility study.

    Science.gov (United States)

    Boldt, Julian; Rottner, Kurt; Schmitter, Marc; Hopfgartner, Andreas; Jakob, Peter; Richter, Ernst-Jürgen; Tymofiyeva, Olga

    2018-04-01

    Magnetic resonance imaging is an emerging technology in dental medicine. While low-resolution MRI has especially provided means to examine the temporomandibular joint due to its anatomic inaccessibility, it was the goal of this study to assess whether high-resolution MRI is capable of delivering a dataset sufficiently precise enough to serve as digital impression of human teeth. An informed and consenting patient in need of dental restoration with fixed partial dentures was chosen as subject. Two prepared teeth were measured using MRI and the dataset subjected to mathematical processing before Fourier transformation. After reconstruction, a 3D file was generated which was fed into an existing industry standard CAD/CAM process. A framework for a fixed dental prosthesis was digitally modeled and manufactured by laser-sintering. The fit in situ was found to be acceptable by current clinical standards, which allowed permanent placement of the fixed prosthesis. Using a clinical whole-body MR scanner with the addition of custom add-on hardware, contrast enhancement, and data post-processing, resolution and signal-to-noise ratio were sufficiently achieved to allow fabrication of a dental restoration in an acquisition time comparable to the setting time of common dental impression materials. Furthermore, the measurement was well tolerated. The herein described method can be regarded as proof of principle that MRI is a promising option for digital impressions when fixed partial dentures are required.

  13. Improvement of autism spectrum disorder symptoms in three children by using gastrin-releasing peptide.

    Science.gov (United States)

    Becker, Michele Michelin; Bosa, Cleonice; Oliveira-Freitas, Vera Lorentz; Goldim, José Roberto; Ohlweiler, Lygia; Roesler, Rafael; Schwartsmann, Gilberto; Riesgo, Rudimar Dos Santos

    2016-01-01

    To evaluate the safety, tolerability and potential therapeutic effects of gastrin-releasing peptide in three children with autistic spectrum disorder. Case series study with the intravenous administration of gastrin-releasing peptide in the dose of 160pmol/kg for four consecutive days. To evaluate the results, parental impressions the Childhood Autism Rating Scale (CARS) and the Clinical Global Impression (CGI) Scale. Each child underwent a new peptide cycle after two weeks. The children were followed for four weeks after the end of the infusions. The gastrin-releasing peptide was well tolerated and no child had adverse effects. Two children had improved social interaction, with a slight improvement in joint attention and the interaction initiatives. Two showed reduction of stereotypes and improvement in verbal language. One child lost his compulsion to bathe, an effect that lasted two weeks after each infusion cycle. Average reduction in CARS score was 2.8 points. CGI was "minimally better" in two children and "much better" in one. This study suggests that the gastrin-releasing peptide is safe and may be effective in improving key symptoms of autism spectrum disorder, but its results should be interpreted with caution. Controlled clinical trials-randomized, double-blinded, and with more children-are needed to better evaluate the possible therapeutic effects of gastrin-releasing peptide in autism. Copyright © 2016 Sociedade Brasileira de Pediatria. Published by Elsevier Editora Ltda. All rights reserved.

  14. Improving global health: counting reasons why.

    Science.gov (United States)

    Selgelid, Michael J

    2008-08-01

    This paper examines cumulative ethical and self-interested reasons why wealthy developed nations should be motivated to do more to improve health care in developing countries. Egalitarian and human rights reasons why wealthy nations should do more to improve global health are that doing so would (1) promote equality of opportunity (2) improve the situation of the worst-off, (3) promote respect of the human right to have one's most basic needs met, and (4) reduce undeserved inequalities in well-being. Utilitarian reasons for improving global health are that this would (5) promote the greater good of humankind, and (6) achieve enormous benefits while requiring only small sacrifices. Libertarian reasons are that this would (7) amend historical injustices and (8) meet the obligation to amend injustices that developed world countries have contributed to. Self-interested reasons why wealthy nations should do more to improve global health are that doing so would (9) reduce the threat of infectious diseases to developed countries, (10) promote developed countries' economic interests, and (11) promote global security. All of these reasons count, and together they add up to make an overwhelmingly powerful case for change. Those opposed to wealthy government funding of developing world health improvement would most likely appeal, implicitly or explicitly to the idea that coercive taxation for redistributive purposes would violate the right of an individual to keep his hard-earned income. The idea that this reason not to improve global health should outweigh the combination of rights and values embodied in the eleven reasons enumerated above, however is implausibly extreme, morally repugnant and perhaps imprudent.

  15. Impressed by impression management: Newcomer reactions to ingratiated supervisors.

    Science.gov (United States)

    Foulk, Trevor A; Long, David M

    2016-10-01

    Organizational newcomers are unfamiliar with many aspects of their workplace and look for information to help them reduce uncertainty and better understand their new environment. One aspect critical to newcomers is the disposition of their supervisor-the person who arguably can impact the newcomer's career the most. To form an impression of their new supervisor, newcomers look to social cues from coworkers who have interpersonal contact with the supervisor. In the present research, we investigate the ways newcomers use observed ingratiation-a common impression management strategy whereby coworkers try to appear likable (Schlenker, 1980)-to form impressions of a supervisor's warmth. Research on social influence cannot easily account for how third parties will interpret ingratiation, as the behaviors linked to ingratiation suggest something positive about the target, yet the unsavory aspects of the behavior imply it may not have the same effects as other positive behaviors. Our findings suggest that newcomers are unique in that they are motivated to learn about their new supervisor, and are prone to ignore those unsavory aspects and infer something positive about a supervisor targeted with ingratiation. Our findings also suggest that this effect can be weakened based on the supervisor's response. In other words, newcomers rely less on evidence from a coworker's ingratiation in the presence of direct behaviors from the supervisor. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  16. Concomitant Anticonvulsants With Bitemporal Electroconvulsive Therapy: A Randomized Controlled Trial With Clinical and Neurobiological Application.

    Science.gov (United States)

    Rakesh, Gopalkumar; Thirthalli, Jagadisha; Kumar, Channaveerachari Naveen; Muralidharan, Kesavan; Phutane, Vivek H; Gangadhar, Bangalore N

    2017-03-01

    Electroconvulsive therapy (ECT) is an effective treatment for major affective disorders. The combined use of ECT and anticonvulsant mood stabilizers is a common clinical scenario. There is dearth of systematic studies on the use of this combination with regard to clinical or cognitive outcomes. We aimed to compare clinical improvement and cognitive adverse effects between patients who received only ECT versus those who received ECT and anticonvulsants. We hypothesized that improvement would be fastest in patients who received only ECT. We conducted a randomized controlled trial in which patients prescribed ECT while being treated with anticonvulsants were randomized into 3 groups: full-dose (FD), half-dose (HD), and stop anticonvulsant. A blind rater assessed clinical improvement in patients using rating scales [Young's Mania Rating Scale (YMRS) and Clinical Global Impression] for clinical improvement and cognitive adverse effects (Postgraduate Institute memory scale). Analysis was done using mixed-effects modeling to delineate differences in clinical and cognitive outcomes across the 3 arms of the study over the course of ECT. Of the 54 patients recruited, 36 patients went into treatment allocation arms per the initial randomization plan. The main anticonvulsants prescribed were sodium valproate and carbamazepine. Patients in the 3 groups were comparable on clinical features. The most common diagnosis was bipolar affective disorder-with current episode of mania. Overall, there was no difference across the 3 groups in final clinical outcome scores (YMRS and Clinical Global Impression) when analyzed as intention to treat (ITT) or "as treated." In both analyses, group × time interaction was significant when comparing trend of YMRS scores between the FD anticonvulsant group and the HD group from baseline to last ECT (P = 0.0435 in ITT and P = 0.0055 in as treated). Patients in the FD group improved faster than those in the HD group. There were no differences across

  17. Effect of Storage Time and Temperature on Dimensional Stability of Impressions Made with Zinc Oxide Impression Paste

    Directory of Open Access Journals (Sweden)

    Sareh Habibzadeh

    2016-10-01

    Full Text Available Objectives: This study aimed to assess the effect of storage time and temperature on dimensional stability of impressions made with Cavex Outline zinc oxide impression paste.Materials and Methods: A round stainless steel mold with five grooves (three horizontal and two vertical was used in this in-vitro experimental study. Cavex Outline impression paste was prepared according to the manufacturer’s instructions and applied to the mold. The mold was placed on a block and stored at 35°C and 100% humidity for setting. The impressions were poured with stone immediately and also after 30, 120, 240 and 420 minutes and 24 hours. The distance between the vertical lines on the casts was measured and compared with that in the immediately poured cast.Results: Storage in a refrigerator and at room temperature for zero to seven hours had no significant effect on dimensional stability of the impressions; however, 24 hours of storage in a refrigerator or at room temperature decreased the dimensional stability of Cavex Outline (P=0.001. Also, a significant association was found between dimensional changes following 24 hours of storage in a refrigerator (4°C and at room temperature (23°C; P<0.01.Conclusions: The optimal pouring time of Cavex Outline impressions with stone is between zero to seven hours, and 24 hours of storage significantly decreases the dimensional stability.Keywords: Dental Impression Materials; Zinc Oxide; Cavex

  18. Preliminary impression techniques for microstomia patients

    Directory of Open Access Journals (Sweden)

    K Aswini Kumar

    2016-01-01

    Full Text Available The Prosthetic rehabilitation of microstomia patients presents difficulties at all the stages. The difficulty starts with the preliminary impression making. This is due to the tongue rigidity and the decreased oral opening. A maximum oral opening which is smaller than the size of the tray can make prosthetic treatment challenging. Due to the restricted mouth opening, insertion and removal of the impression trays is extremely cumbersome and various modifications of the trays have been used in the past. Among these are the flexible trays and the sectional trays used with different modes of reassembling the segments extra orally after the impression is made. This article reviews the literature published from 1971 to 2015 concerning preliminary impression techniques used in making impressions for patients with microstomia based on various tray designs. An electronic search was performed across three databases (PubMed, Science Direct and Google Scolar for relevant citations. The keywords/combinations used for the search were microstomia, limited/constricted/restricted mouth opening/oral access, trismus, sectional trays, impressions and prosthetic/prosthodontic rehabilitation. The search was limited to papers written in English which resulted in a total of 45 related articles of which 17 articles were included for discussion of this review.

  19. Evaluation of digital dental models obtained from dental cone-beam computed tomography scan of alginate impressions.

    Science.gov (United States)

    Jiang, Tingting; Lee, Sang-Mi; Hou, Yanan; Chang, Xin; Hwang, Hyeon-Shik

    2016-05-01

    To investigate the dimensional accuracy of digital dental models obtained from the dental cone-beam computed tomography (CBCT) scan of alginate impressions according to the time elapse when the impressions are stored under ambient conditions. Alginate impressions were obtained from 20 adults using 3 different alginate materials, 2 traditional alginate materials (Alginoplast and Cavex Impressional) and 1 extended-pour alginate material (Cavex ColorChange). The impressions were stored under ambient conditions, and scanned by CBCT immediately after the impressions were taken, and then at 1 hour intervals for 6 hours. After reconstructing three-dimensional digital dental models, the models were measured and the data were analyzed to determine dimensional changes according to the elapsed time. The changes within the measurement error were regarded as clinically acceptable in this study. All measurements showed a decreasing tendency with an increase in the elapsed time after the impressions. Although the extended-pour alginate exhibited a less decreasing tendency than the other 2 materials, there were no statistically significant differences between the materials. Changes above the measurement error occurred between the time points of 3 and 4 hours after the impressions. The results of this study indicate that digital dental models can be obtained simply from a CBCT scan of alginate impressions without sending them to a remote laboratory. However, when the impressions are not stored under special conditions, they should be scanned immediately, or at least within 2 to 3 hours after the impressions are taken.

  20. Validation of a Novel Scoring System for Changes in Skeletal Manifestations of Hypophosphatasia in Newborns, Infants, and Children: The Radiographic Global Impression of Change Scale.

    Science.gov (United States)

    Whyte, Michael P; Fujita, Kenji P; Moseley, Scott; Thompson, David D; McAlister, William H

    2018-05-01

    Hypophosphatasia (HPP) is the heritable metabolic disease characterized by impaired skeletal mineralization due to low activity of the tissue-nonspecific isoenzyme of alkaline phosphatase. Although HPP during growth often manifests with distinctive radiographic skeletal features, no validated method was available to quantify them, including changes over time. We created the Radiographic Global Impression of Change (RGI-C) scale to assess changes in the skeletal burden of pediatric HPP. Site-specific pairs of radiographs of newborns, infants, and children with HPP from three clinical studies of asfotase alfa, an enzyme replacement therapy for HPP, were obtained at baseline and during treatment. Each pair was scored by three pediatric radiologists ("raters"), with nine raters across the three studies. Intrarater and interrater agreement was determined by weighted Kappa coefficients. Interrater reliability was assessed using intraclass correlation coefficients (ICCs) and by two-way random effects analysis of variance (ANOVA) and a mixed-model repeated measures ANOVA. Pearson correlation coefficients evaluated relationships of the RGI-C to the Rickets Severity Scale (RSS), Pediatric Outcomes Data Collection Instrument Global Function Parent Normative Score, Childhood Health Assessment Questionnaire Disability Index, 6-Minute Walk Test percent predicted, and Z-score for height in patients aged 6 to 12 years at baseline. Eighty-nine percent (8/9) of raters showed substantial or almost perfect intrarater agreement of sequential RGI-C scores (weighted Kappa coefficients, 0.72 to 0.93) and moderate or substantial interrater agreement (weighted Kappa coefficients, 0.53 to 0.71) in patients aged 0 to 12 years at baseline. Moderate-to-good interrater reliability was observed (ICC, 0.57 to 0.65). RGI-C scores were significantly (p ≤ 0.0065) correlated with the RSS and with measures of global function, disability, endurance, and growth in the patients aged 6 to 12 years at

  1. Impression mismanagement : People as inept self-presenters

    NARCIS (Netherlands)

    Steinmetz, J.F.; Sezer, O.; Sedikides, C.

    2017-01-01

    People routinely manage the impressions they make on others, attempting to project a favorable self-image. The bulk of the literature has portrayed people as savvy self-presenters who typically succeed at conveying a desired impression. When people fail at making a favorable impression, such as when

  2. Impact of Site Selection and Study Conduct on Outcomes in Global Clinical Trials.

    Science.gov (United States)

    Sarwar, Chaudhry M S; Vaduganathan, Muthiah; Butler, Javed

    2017-08-01

    There are over 25 million patients living with heart failure globally. Overall, and especially post-discharge, clinical outcomes have remained poor in heart failure despite multiple trials, with both successes and failures over the last two decades. Matching therapies to the right patient population, identifying high-quality sites, and ensuring optimal trial design and execution represent important considerations in the development of novel therapeutics in this space. While clinical trials have undergone rapid globalization, this has come with regional variation in comorbidities, clinical parameters, and even clinical outcomes and treatment effects across international sites. These issues have now highlighted knowledge gaps about the conduct of trials, selection of study sites, and an unmet need to develop and identify "ideal" sites. There is a need for all stakeholders, including academia, investigators, healthcare organizations, patient advocacy groups, industry sponsors, research organizations, and regulatory authorities, to work as a multidisciplinary group to address these problems and develop practical solutions to improve trial conduct, efficiency, and execution. We review these trial-level issues using examples from contemporary studies to inform and optimize the design of future global clinical trials in heart failure.

  3. Effects of Impression Coping Design, Impression Technique, and Dental Undercuts on the Accuracy of Implant Impressions Assessed by 3-Dimensional Optical Scanning: An In Vitro Study.

    Science.gov (United States)

    Sabouhi, Mahmoud; Bajoghli, Farshad; Dakhilalian, Mansour; Beygi, Ali; Abolhasani, Majid

    2016-04-01

    The aim of this in vitro study was to evaluate the effect of the type and design of the impression copings on the accuracy of implant impressions in 2 different conditions. A reference model with 2 implants inserted in bilateral mandibular canines was fabricated. The posterior teeth were inserted as tilted to simulate intra-oral undercuts. The teeth were eliminated to create an edentulous condition. Three different impression techniques were performed (open high retentive [OH], open low retentive [OL], closed [C]) for each condition. Total of 48 casts were made. Two scan-bodies were secured on each cast, scanned by an optical scanner. Then, they were compared to the scan of the reference model, and the calculated mean errors were analyzed with a 2-way ANOVA and Tukey test. There was no significant difference between the complete and partially edentulous groups (F = 3.252, P = 0.079). There was significant difference between the different designs of the impression copings (F = 31.789, P impression copings was more important than the undercuts. The accuracy of the closed tray coping was greater than the low retentive coping and equal to the high retentive coping.

  4. Accuracy of 3D white light scanning of abutment teeth impressions: evaluation of trueness and precision.

    Science.gov (United States)

    Jeon, Jin-Hun; Kim, Hae-Young; Kim, Ji-Hwan; Kim, Woong-Chul

    2014-12-01

    This study aimed to evaluate the accuracy of digitizing dental impressions of abutment teeth using a white light scanner and to compare the findings among teeth types. To assess precision, impressions of the canine, premolar, and molar prepared to receive all-ceramic crowns were repeatedly scanned to obtain five sets of 3-D data (STL files). Point clouds were compared and error sizes were measured (n=10 per type). Next, to evaluate trueness, impressions of teeth were rotated by 10°-20° and scanned. The obtained data were compared with the first set of data for precision assessment, and the error sizes were measured (n=5 per type). The Kruskal-Wallis test was performed to evaluate precision and trueness among three teeth types, and post-hoc comparisons were performed using the Mann-Whitney U test with Bonferroni correction (α=.05). Precision discrepancies for the canine, premolar, and molar were 3.7 µm, 3.2 µm, and 7.3 µm, respectively, indicating the poorest precision for the molar (Pimpressions of abutment teeth using a white light scanner was assessed to be a highly accurate method and provided discrepancy values in a clinically acceptable range. Further study is needed to improve digitizing performance of white light scanning in axial wall.

  5. Donepezil improved memory in multiple sclerosis in a randomized clinical trial.

    Science.gov (United States)

    Krupp, L B; Christodoulou, C; Melville, P; Scherl, W F; MacAllister, W S; Elkins, L E

    2004-11-09

    To determine the effect of donepezil in treating memory and cognitive dysfunction in multiple sclerosis (MS). This single-center double-blind placebo-controlled clinical trial evaluated 69 MS patients with cognitive impairment who were randomly assigned to receive a 24-week treatment course of either donepezil (10 mg daily) or placebo. Patients underwent neuropsychological assessment at baseline and after 24 weeks of treatment. The primary outcome was change in verbal learning and memory on the Selective Reminding Test (SRT). Secondary outcomes included other tests of cognitive function, patient-reported change in memory, and clinician-reported impression of cognitive change. Donepezil-treated patients showed significant improvement in memory performance on the SRT compared to placebo (p = 0.043). The benefit of donepezil remained significant after controlling for various covariates including age, Expanded Disability Status Scale, baseline SRT score, reading ability, MS subtype, and sex. Donepezil-treated patients did not show significant improvements on other cognitive tests, but were more than twice as likely to report memory improvement than those in the placebo group (p = 0.006). The clinician also reported cognitive improvement in almost twice as many donepezil vs placebo patients (p = 0.036). No serious adverse events related to study medication occurred, although more donepezil (34.3%) than placebo (8.8%) subjects reported unusual/abnormal dreams (p = 0.010). Donepezil improved memory in MS patients with initial cognitive impairment in a single center clinical trial. A larger multicenter investigation of donepezil in MS is warranted in order to more definitively assess the efficacy of this intervention.

  6. Resistance to disinfection of a polymicrobial association contaminating the surface of elastomeric dental impressions.

    Science.gov (United States)

    Giammanco, Giovanni M; Melilli, Dario; Rallo, Antonio; Pecorella, Sonia; Mammina, Caterina; Pizzo, Giuseppe

    2009-04-01

    The aim of this study was to evaluate the ability to resist disinfection of a polymicrobial association contaminating the surface of dental impressions obtained with two different elastomers: a polyether (Impregum) and an addition-polymerized silicone (Elite). Impressions were contaminated with a mixture of three biofilm-forming microorganisms (Staphylococcus aureus, Pseudomonas aeruginosa and Candida albicans) and disinfected immediately after contamination, or after microbial layers were allowed to develop during a six-hour storage. Two commercial disinfectants were tested: MD 520 containing 0.5% glutaraldehyde and Sterigum Powder without glutaraldehyde. Residual contamination was recovered by mechanical rinsing immediately after disinfection and after a six-hour storage of disinfected impressions, and assessed by colony counting. Both disinfectants tested were shown to be effective in reducing the microbial presence on the impression materials, achieving at least a 102 reduction of microbial counts compared to water rinsing. However, Sterigum was generally less effective on the Elite elastomer and could not grant disinfection on six-hour aged P. aeruginosa and C. albicans microbial layers. The results of this study suggest that the materials used for the impressions influence the efficacy of disinfection. Disinfectants should be tested according to conditions encountered in everyday clinical practice and the need for immediate disinfection of impressions should be clearly indicated by manufacturers.

  7. Three-dimensional evaluation of the repeatability of scans of stone models and impressions using a blue LED scanner.

    Science.gov (United States)

    Jeon, Jin-Hun; Jung, Il-Do; Kim, Ji-Hwan; Kim, Hae-Young; Kim, Woong-Chul

    2015-01-01

    In this study, we evaluated the repeatability of scans of stone models and impressions of abutment teeth using a blue LED scanner and compared the findings between different abutment teeth types. For the stone models as well as impression of the canines, premolars, and molars, we generated 10 color-difference-maps and reports for each tooth type (n=10 per tooth type). One-way analysis of variance (ANOVA) and independent t-tests were performed to evaluate the repeatability of scans of the stone models and impressions obtained from a blue LED scanner. Our results indicate a high repeatability of scans of stone models and impressions of abutment teeth using the blue LED scanner and suggest a possible clinical advantage for scanning impressions of different abutment teeth types.

  8. Quantifying the impact cosmetic make-up has on age perception and the first impression projected.

    Science.gov (United States)

    Dayan, Steven H; Cho, Katherine; Siracusa, Mary; Gutierrez-Borst, Selika

    2015-04-01

    First impressions are lasting, consequential and defined as the immediate judgment made of another from zero acquaintance. Multiple studies have reported the benefits of cosmetic make-up. We set out to investigate the psychosocial and aesthetic effects of cosmetic make-up in order to better understand why women wear it. Twenty-seven women were recruited in order to examine the effects of cosmetic make-up on first impressions. The photographs of individual subjects wearing the control cosmetics, their own make-up, and no make-up were randomly assigned to three binders (A, B, and C). Three hundred evaluators participated (100 evaluators per book) and completed a 10-point First Impression Scale for each of the 27 photos in their binder. Statistical analysis of the collected data was conducted in SPSS using two-tailed t-tests to determine the statistical significance of the differences between first impressions of Own Make-up vs No Make-up, No Make-up vs Control Make-up, and Own Makeup vs Control Make-up. There was a significant difference in improvement in all pairings across all 8 categories in the First Impressions questionnaire particularly in perceived age between own make-up, no make-up, control make-up (41, 42, 38; Pfirst impressions, age perception, self-esteem, and the quality of life impact that cosmetic makeup has on women's appearance and confidence. Subjects wearing cosmetic make-up appeared 4 years younger than those wearing no make-up. And the control cosmetic make-up subjects on average projected a 37% better first impression than subjects wearing no make-up. We objectively quantified and qualified the benefits of applying cosmetic make-up. Make-up can reduce the perceived age, improve the first impression projected and increase the self-esteem of those who apply it.

  9. In-vitro evaluation of the accuracy of conventional and digital methods of obtaining full-arch dental impressions.

    Science.gov (United States)

    Ender, Andreas; Mehl, Albert

    2015-01-01

    To investigate the accuracy of conventional and digital impression methods used to obtain full-arch impressions by using an in-vitro reference model. Eight different conventional (polyether, POE; vinylsiloxanether, VSE; direct scannable vinylsiloxanether, VSES; and irreversible hydrocolloid, ALG) and digital (CEREC Bluecam, CER; CEREC Omnicam, OC; Cadent iTero, ITE; and Lava COS, LAV) full-arch impressions were obtained from a reference model with a known morphology, using a highly accurate reference scanner. The impressions obtained were then compared with the original geometry of the reference model and within each test group. A point-to-point measurement of the surface of the model using the signed nearest neighbour method resulted in a mean (10%-90%)/2 percentile value for the difference between the impression and original model (trueness) as well as the difference between impressions within a test group (precision). Trueness values ranged from 11.5 μm (VSE) to 60.2 μm (POE), and precision ranged from 12.3 μm (VSE) to 66.7 μm (POE). Among the test groups, VSE, VSES, and CER showed the highest trueness and precision. The deviation pattern varied with the impression method. Conventional impressions showed high accuracy across the full dental arch in all groups, except POE and ALG. Conventional and digital impression methods show differences regarding full-arch accuracy. Digital impression systems reveal higher local deviations of the full-arch model. Digital intraoral impression systems do not show superior accuracy compared to highly accurate conventional impression techniques. However, they provide excellent clinical results within their indications applying the correct scanning technique.

  10. Evidence for use of intraoral scanners under clinical conditions for obtaining full-arch digital impressions is insufficient.

    Science.gov (United States)

    Khraishi, Hadil; Duane, Brett

    2017-03-01

    Data sourcesPubMed, Scopus, Cochrane Library, Web of Science, Embase. Relevant papers were also searched from the reference lists of selected studies. A web search of current manufacturers of intraoral scanners.Study selectionStudies with full-arch digital impressions recorded intraorally that tested any of the following outcomes; validity, repeatability, reproducibility, time efficiency. Patient acceptance of digital impressions were considered for the review.Data extraction and synthesisInitially, only titles of the papers identified from the databases were screened, then further screening of the abstracts of the selected titles was carried out. Then finally, full text articles of the selected abstracts were read and only relevant articles were included in the review. Two examiners assessed the quality of the chosen articles using the QUADAS checklist. Any disagreement was resolved by discussion between the two examiners.ResultsOnly eight studies were found that carried out full-arch intraoral scanning. Four studies reported on validity, repeatability and reproducibility of digital measurements. These studies were included in the qualitative assessment. Two intraoral scanners were tested, Lava COS and iTero. In assessing scanning times and patient perception, six and four studies were included, respectively. A decrease in the scanning time was noted as the operator gained experience.ConclusionsThe literature lacks sufficient evidence to comment on the use of intraoral scanners under clinical conditions. Further studies are needed to properly assess the reliability, accuracy, reproducibility and scanning times of intraoral scans.

  11. Comparison of Different Final Impression Techniques for Management of Resorbed Mandibular Ridge: A Case Report

    Directory of Open Access Journals (Sweden)

    Bhupender Yadav

    2014-01-01

    Full Text Available The history of complete denture impression procedures has been influenced largely by the development of impression materials from which new techniques and ideas arose. The purpose of this study was to compare the retention of complete dentures made by using different impression techniques like conventional, admixed, all green, and functional techniques. The results showed that there was significant difference in retention between the six techniques where functional technique showed the highest mean value of retention followed by elastomeric, all green, and admixed, while cocktail and green stick compound showed the lowest mean value. However, on clinical examination, the retention produced by the six techniques was satisfactory.

  12. Comparison of different final impression techniques for management of resorbed mandibular ridge: a case report.

    Science.gov (United States)

    Yadav, Bhupender; Jayna, Manisha; Yadav, Harish; Suri, Shrey; Phogat, Shefali; Madan, Reshu

    2014-01-01

    The history of complete denture impression procedures has been influenced largely by the development of impression materials from which new techniques and ideas arose. The purpose of this study was to compare the retention of complete dentures made by using different impression techniques like conventional, admixed, all green, and functional techniques. The results showed that there was significant difference in retention between the six techniques where functional technique showed the highest mean value of retention followed by elastomeric, all green, and admixed, while cocktail and green stick compound showed the lowest mean value. However, on clinical examination, the retention produced by the six techniques was satisfactory.

  13. Dental impressions using 3D digital scanners: virtual becomes reality.

    Science.gov (United States)

    Birnbaum, Nathan S; Aaronson, Heidi B

    2008-10-01

    The technologies that have made the use of three-dimensional (3D) digital scanners an integral part of many industries for decades have been improved and refined for application to dentistry. Since the introduction of the first dental impressioning digital scanner in the 1980s, development engineers at a number of companies have enhanced the technologies and created in-office scanners that are increasingly user-friendly and able to produce precisely fitting dental restorations. These systems are capable of capturing 3D virtual images of tooth preparations, from which restorations may be fabricated directly (ie, CAD/CAM systems) or fabricated indirectly (ie, dedicated impression scanning systems for the creation of accurate master models). The use of these products is increasing rapidly around the world and presents a paradigm shift in the way in which dental impressions are made. Several of the leading 3D dental digital scanning systems are presented and discussed in this article.

  14. A Technique for Digital Impression and Bite Registration for a Single Edentulous Arch.

    Science.gov (United States)

    Fang, Yiqin; Fang, Jing-Huan; Jeong, Seung-Mi; Choi, Byung-Ho

    2018-03-09

    Few studies have reported the application of digital technology for the process of impression and interocclusal recordings in edentulous patients. This article describes a digitizing system for generating digital edentulous models with a jaw relationship by taking direct digital impressions and a virtual bite registration using intraoral digital scanning. A specialized scan retractor was used to make digital impressions of edentulous jaws in patients' mouths using an intraoral scanner. Virtual bite registration was obtained with optical scanning of the buccal surfaces of both jaws at the occlusal vertical dimension. The registration was then used as a reference for aligning both jaws. Digital edentulous models that include the jaw relationship would be clinically beneficial for the fabrication of complete dentures in edentulous patients. © 2018 by the American College of Prosthodontists.

  15. The effect of pouring time on the dimensional accuracy of casts made from different irreversible hydrocolloid impression materials

    Directory of Open Access Journals (Sweden)

    Supneet Singh Wadhwa

    2013-01-01

    Full Text Available Aims and Objectives: To determine the time dependent accuracy of casts made from three different irreversible hydrocolloids. Materials and Methods: The effect of delayed pouring on the accuracy of three different irreversible hydrocolloid impression materials - Regular set CA 37(Cavex, The Netherlands, regular set chromatic (Jeltrate, Dentsply, and fast set (Hydrogum soft, Zhermack Clinical was investigated. A brass master die that contained two identical posts simulating two complete crown-tapered abutment preparations with reference grooves served as a standardized master model. A total of 120 impressions were made using specially prepared stock-perforated brass tray with 40 impressions of each material. The impressions were further sub-grouped according to four different storage time intervals: 0 min (immediately, 12 min, 30 min, and 1 h. The impressions were stored at room temperature in a zip-lock plastic bag. Interabutment and intraabutment distances were measured in the recovered stone dies (Type IV, Kalrock using a profile projector with an accuracy of 0.001 mm. The data so obtained was analyzed statistically. Results: Results of this study showed no statistically significant differences in the accuracy of casts obtained at different time intervals. Conclusion: Because it is not always possible to pour the impression immediately in routine clinical practice, all irreversible hydrocolloid materials studied could be stored in a zip-lock plastic bag for upto 1 h without any significant distortion.

  16. Downplaying Positive Impressions: Compensation Between Warmth and Competence in Impression Management.

    Science.gov (United States)

    Holoien, Deborah Son; Fiske, Susan T

    2013-01-01

    The compensation effect demonstrates a negative relationship between the dimensions of warmth and competence in impression formation in comparative contexts. However, does compensation between warmth and competence extend to impression management? Two studies examined whether people actively downplay their warmth in order to appear competent and downplay their competence in order to appear warm. In Studies 1a and 1b, participants selected words pretested to be high or low in warmth and competence to include in an e-mail message to people they wanted to impress. As predicted, participants downplayed their competence when they wanted to appear warm (Study 1a) and downplayed their warmth when they wanted to appear competent (Study 1b). In Studies 2a and 2b, compensation also occurred when participants introduced themselves to another person, as evidenced by the questions they selected to answer about themselves, their self-reported goals, and their open-ended introductions. Compensation occurred uniquely between warmth and competence and not for other dimensions, such as healthiness (Study 2a) and political interest (Study 2b), which suggests that the compensation effect extends beyond a mere zero-sum exchange between dimensions.

  17. Evaluation of digital dental models obtained from dental cone-beam computed tomography scan of alginate impressions

    Science.gov (United States)

    Jiang, Tingting; Lee, Sang-Mi; Hou, Yanan; Chang, Xin

    2016-01-01

    Objective To investigate the dimensional accuracy of digital dental models obtained from the dental cone-beam computed tomography (CBCT) scan of alginate impressions according to the time elapse when the impressions are stored under ambient conditions. Methods Alginate impressions were obtained from 20 adults using 3 different alginate materials, 2 traditional alginate materials (Alginoplast and Cavex Impressional) and 1 extended-pour alginate material (Cavex ColorChange). The impressions were stored under ambient conditions, and scanned by CBCT immediately after the impressions were taken, and then at 1 hour intervals for 6 hours. After reconstructing three-dimensional digital dental models, the models were measured and the data were analyzed to determine dimensional changes according to the elapsed time. The changes within the measurement error were regarded as clinically acceptable in this study. Results All measurements showed a decreasing tendency with an increase in the elapsed time after the impressions. Although the extended-pour alginate exhibited a less decreasing tendency than the other 2 materials, there were no statistically significant differences between the materials. Changes above the measurement error occurred between the time points of 3 and 4 hours after the impressions. Conclusions The results of this study indicate that digital dental models can be obtained simply from a CBCT scan of alginate impressions without sending them to a remote laboratory. However, when the impressions are not stored under special conditions, they should be scanned immediately, or at least within 2 to 3 hours after the impressions are taken. PMID:27226958

  18. Clinical usefulness and economic implications of continuation/maintenance electroconvulsive therapy in a Spanish National Health System public hospital: A case series.

    Science.gov (United States)

    Rodriguez-Jimenez, Roberto; Bagney, Alexandra; Torio, Iosune; Caballero, Montserrat; Ruiz, Pedro; Rivas, Francisco de Paula Jose; Jimenez-Arriero, Miguel Angel

    2015-01-01

    Continuation/maintenance electroconvulsive therapy has been shown to be effective for prevention of relapse in affective and psychotic disorders. However, there is a limited nubber of studies that investigate clinical management, associated costs, and perceived quality variables. A series of 8 cases included during the first 18 months of the Continuation/Maintenance Electroconvulsive Therapy Program of the Psychiatry Department at 12 de Octubre University Hospital is presented. Clinical variables (Clinical Global Impression-Improvement Scale, length of hospitalization, number of Emergency Department visits, number of urgent admissions) before and after inclusion in the continuation/maintenance electroconvulsive therapy program were compared for each patient, as well as associated costs and perceived quality. After inclusion in the program, 50.0% of patients reported feeling « much better » and 37.5% « moderately better » in the Clinical Global Impression-Improvement Scale. In addition, after inclusion in the continuation/maintenance electroconvulsive therapy program, patients were hospitalized for a total of 349 days, visited the Emergency Department on 3 occasions, and had 2 urgent admissions, compared to 690 days of hospitalization (P = .012), 26 Emergency Department visits (P = .011) and 22 urgent admissions (P = .010) during the same period before inclusion in the program. Associated direct costs per day of admission were reduced to 50.6% of the previous costs, and costs associated with Emergency Department visits were reduced to 11.5% of the previous costs. As regards perceived quality, 87.5% of patients assessed the care and treatment received as being « very satisfactory », and 12.5% as « satisfactory ». This continuation/maintenance electroconvulsive therapy program has shown to be clinically useful and to have a favourable economic impact, as well as high perceived quality. Copyright © 2014 SEP y SEPB. Published by Elsevier España. All rights

  19. Neural correlates of self-deception and impression-management.

    Science.gov (United States)

    Farrow, Tom F D; Burgess, Jenny; Wilkinson, Iain D; Hunter, Michael D

    2015-01-01

    Self-deception and impression-management comprise two types of deceptive, but generally socially acceptable behaviours, which are common in everyday life as well as being present in a number of psychiatric disorders. We sought to establish and dissociate the 'normal' brain substrates of self-deception and impression-management. Twenty healthy participants underwent fMRI scanning at 3T whilst completing the 'Balanced Inventory of Desirable Responding' test under two conditions: 'fake good', giving the most desirable impression possible and 'fake bad' giving an undesirable impression. Impression-management scores were more malleable to manipulation via 'faking' than self-deception scores. Response times to self-deception questions and 'fake bad' instructions were significantly longer than to impression-management questions and 'fake good' instructions respectively. Self-deception and impression-management manipulation and 'faking bad' were associated with activation of medial prefrontal cortex (mPFC) and left ventrolateral prefrontal cortex (vlPFC). Impression-management manipulation was additionally associated with activation of left dorsolateral prefrontal cortex and left posterior middle temporal gyrus. 'Faking bad' was additionally associated with activation of right vlPFC, left temporo-parietal junction and right cerebellum. There were no supra-threshold activations associated with 'faking good'. Our neuroimaging data suggest that manipulating self-deception and impression-management and more specifically 'faking bad' engages a common network comprising mPFC and left vlPFC. Shorter response times and lack of dissociable neural activations suggests that 'faking good', particularly when it comes to impression-management, may be our most practiced 'default' mode. Copyright © 2014 Elsevier Ltd. All rights reserved.

  20. Practical Chronic Pain Assessment Tools in Clinical Practice

    OpenAIRE

    Lončarić-Katušin, Mirjana; Milošević, Milan; Žilić, Antonio; Mišković, Petar; Majerić-Kogler, Višnja; Žunić, Josip

    2016-01-01

    The aim of the study was to show the role of tools in the evaluation of chronic pain (CP) in general practitioner (GP) everyday clinical practice. The study was done by analyzing electronic database of the first visits of 1090 CP patients referred to the Pain Clinic of the Karlovac General Hospital, Karlovac, Croatia, by their GPs. All patient records were analyzed according to the cause of CP, strongest pain a week before the examination, quality of sleep, and the Patients’ Global Impression...

  1. Making a Great First Impression

    Science.gov (United States)

    Evenson, Renee

    2007-01-01

    Managers and business owners often base hiring decisions on first impressions. That is why it is so important to teach students to make a great first impression--before they go on that first job interview. Managers do not have unrealistic expectations, they just want to hire people who they believe can develop into valuable employees. A nice…

  2. Two- and three-dimensional accuracy of dental impression materials: effects of storage time and moisture contamination.

    Science.gov (United States)

    Chandran, Deepa T; Jagger, Daryll C; Jagger, Robert G; Barbour, Michele E

    2010-01-01

    Dental impression materials are used to create an inverse replica of the dental hard and soft tissues, and are used in processes such as the fabrication of crowns and bridges. The accuracy and dimensional stability of impression materials are of paramount importance to the accuracy of fit of the resultant prosthesis. Conventional methods for assessing the dimensional stability of impression materials are two-dimensional (2D), and assess shrinkage or expansion between selected fixed points on the impression. In this study, dimensional changes in four impression materials were assessed using an established 2D and an experimental three-dimensional (3D) technique. The former involved measurement of the distance between reference points on the impression; the latter a contact scanning method for producing a computer map of the impression surface showing localised expansion, contraction and warpage. Dimensional changes were assessed as a function of storage times and moisture contamination comparable to that found in clinical situations. It was evident that dimensional changes observed using the 3D technique were not always apparent using the 2D technique, and that the former offers certain advantages in terms of assessing dimensional accuracy and predictability of impression methods. There are, however, drawbacks associated with 3D techniques such as the more time-consuming nature of the data acquisition and difficulty in statistically analysing the data.

  3. The Bidimensional Impression Management Index (BIMI): measuring agentic and communal forms of impression management.

    Science.gov (United States)

    Blasberg, Sabrina A; Rogers, Katherine H; Paulhus, Delroy L

    2014-01-01

    Measures of impression management have yet to incorporate two-factor models of person perception. The 2 primary factors are often labeled agency and communion. In Study 1, we assembled a new measure of impression management—the Bidimensional Impression Management Index (BIMI): It comprises 2 subscales designed specifically to tap agentic and communal content. Both subscales showed adequate alpha reliabilities under both honest and faking conditions. In Study 2, the BIMI was cross-validated in a new sample: The subscales remained relatively independent, and their reliabilities remained solid. A coherent pattern of personality correlates also supported the validities of both subscales. In Study 3, the differential sensitivity of the 2 subscales was demonstrated by manipulating the job type in simulated job applications. Implications and applications of the BIMI are discussed.

  4. Making a Good Impression at Work: National Differences in Employee Impression Management Behaviors in Japan, Korea, and the United States.

    Science.gov (United States)

    Krieg, Alexander; Ma, Li; Robinson, Patricia

    2018-02-17

    Impression management has important implications for success at work. This study explores differences in impression management in the East and West by examining the use of self-promotion, ingratiation, and exemplification directed towards three targets: supervisors, peers, and subordinates among 945 company employees from Japan, Korea, and the United States. Our results show that Korean employees used all three strategies most frequently, followed by United States, and then Japanese employees. Japanese and Korean employees used impression management strategies differentially across the three targets, and U.S. employees used impression management equally across targets. This elucidates how cultural trends in hierarchical relationships impact social behavior within the workplace. A follow-up mediation analysis found that relational or labor mobility fully mediated country differences in impression management, suggesting that culture is also reflected in larger social ecological trends in employee's ability and likelihood to change jobs, which also account for impression management strategy usage. Theoretical and practical implications for international business are discussed. This research may be useful in aligning strategies foreign employees might employ for using impression management when in Japan, Korea, and the United States.

  5. Evaluating the marginal fit of zirconia copings with digital impressions with an intraoral digital scanner.

    Science.gov (United States)

    An, Shinyoung; Kim, Sungtae; Choi, Hyunmin; Lee, Jae-Hoon; Moon, Hong-Seok

    2014-11-01

    Digital impression systems have been developed to overcome the disadvantages associated with conventional impression methods. The purpose of this study was to compare the marginal fit of zirconia copings designed with the use of an iTero digital scanner with those designed by the conventional impression technique. Thirty identical cast, base-metal dies from 1 maxillary central incisor prepared for a ceramic crown restoration were fabricated. For the conventional impression group (CI), base metal dies (n=10) were replicated as stone dies by means of a conventional impression technique with polyvinyl siloxane material. For the iTero with polyurethane group (iP), base metal dies (n=10) were replicated as polyurethane dies with the iTero digital impression system. For the iTero with no dies group (iNo), base metal dies (n=10) were scanned with the iTero digital impression system, but no dies were fabricated. For each group, 10 zirconia copings were fabricated based on the stone dies (CI group), polyurethane dies (iP group), or stereolithography files (iNo group). The marginal gap of each specimen was measured with a light microscope at ×50 magnification. One-way analysis of variance and the Tukey honestly significant difference test were used for statistical analysis (α=.05). Statistically significant differences were found between the CI group and iP group (Pdigital impression method than in the group that used the conventional impression method. However, the marginal discrepancies of all of the groups were clinically acceptable. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

  6. Final-impression techniques and materials for making complete and removable partial dentures.

    Science.gov (United States)

    Jayaraman, Srinivasan; Singh, Balendra P; Ramanathan, Balasubramanian; Pazhaniappan Pillai, Murukan; MacDonald, Laura; Kirubakaran, Richard

    2018-04-04

    Endentulism is relatively common and is often treated with the provision of complete or partial removable dentures. Clinicians make final impressions of complete dentures (CD) and removable partial dentures (RPD) using different techniques and materials. Applying the correct impression technique and material, based on an individual's oral condition, improves the quality of the prosthesis, which may improve quality of life. To assess the effects of different final-impression techniques and materials used to make complete dentures, for retention, stability, comfort, and quality of life in completely edentulous people.To assess the effects of different final-impression techniques and materials used to make removable partial dentures, for stability, comfort, overextension, and quality of life in partially edentulous people. Cochrane Oral Health's Information Specialist searched the following databases: Cochrane Oral Health's Trials Register (to 22 November 2017), the Cochrane Central Register of Controlled Trials (CENTRAL) (Cochrane Register of Studies, to 22 November 2017), MEDLINE Ovid (1946 to 22 November 2017), and Embase Ovid (21 December 2015 to 22 November 2017). The US National Institutes of Health Trials Registry (ClinicalTrials.gov) and the World Health Organization International Clinical Trials Registry Platform were searched for ongoing trials. No restrictions were placed on language or publication status when searching the electronic databases, however the search of Embase was restricted by date due to the Cochrane Centralised Search Project to identify all clinical trials and add them to CENTRAL. We included randomised controlled trials (RCTs) comparing different final-impression techniques and materials for treating people with complete dentures (CD) and removable partial dentures (RPD). For CD, we included trials that compared different materials or different techniques or both. In RPD for tooth-supported conditions, we included trials comparing the

  7. Accuracy of Gypsum Casts after Different Impression Techniques and Double Pouring.

    Directory of Open Access Journals (Sweden)

    Stephania Caroline Rodolfo Silva

    Full Text Available This study evaluated the accuracy of gypsum casts after different impression techniques and double pouring. Ten patients were selected and for each one it was obtained 5 partial putty/wash impressions with vinyl polysiloxane (VPS material from teeth #13 to #16 with partial metal stock trays. The following techniques were performed: (1 one-step; two-step relief with: (2 PVC film; (3 slow-speed tungsten carbide bur and scalpel blade, (4 small movements of the tray and (5 without relief-negative control. The impressions were disinfected with 0.5% sodium hypochlorite for 10 minutes and stored during 110 and 230 minutes for the first and second pouring, respectively, with type IV gypsum. Three intra-oral lateral photographs of each patient were taken using a tripod and a customized radiographic positioner. The images were imported into ImageJ software and the total area of the buccal surface from teeth #13 to #16 was measured. A 4.0% coefficient of variance was criterion for using these measurements as Baseline values. The casts were photographed and analyzed using the same standardization for the clinical images. The area (mm2 obtained from the difference between the measurements of each gypsum cast and the Baseline value of the respective patient were calculated and analyzed by repeated-measures two way-ANOVA and Mauchly's Sphericity test (α = 0.05. No significant effect was observed for Impression technique (P = 0.23, Second pouring (P = 0.99 and their interaction (P = 0.25. The impression techniques and double pouring did not influence the accuracy of the gypsum casts.

  8. Accuracy of Digital vs Conventional Implant Impression Approach: A Three-Dimensional Comparative In Vitro Analysis.

    Science.gov (United States)

    Basaki, Kinga; Alkumru, Hasan; De Souza, Grace; Finer, Yoav

    To assess the three-dimensional (3D) accuracy and clinical acceptability of implant definitive casts fabricated using a digital impression approach and to compare the results with those of a conventional impression method in a partially edentulous condition. A mandibular reference model was fabricated with implants in the first premolar and molar positions to simulate a patient with bilateral posterior edentulism. Ten implant-level impressions per method were made using either an intraoral scanner with scanning abutments for the digital approach or an open-tray technique and polyvinylsiloxane material for the conventional approach. 3D analysis and comparison of implant location on resultant definitive casts were performed using laser scanner and quality control software. The inter-implant distances and interimplant angulations for each implant pair were measured for the reference model and for each definitive cast (n = 20 per group); these measurements were compared to calculate the magnitude of error in 3D for each definitive cast. The influence of implant angulation on definitive cast accuracy was evaluated for both digital and conventional approaches. Statistical analysis was performed using t test (α = .05) for implant position and angulation. Clinical qualitative assessment of accuracy was done via the assessment of the passivity of a master verification stent for each implant pair, and significance was analyzed using chi-square test (α = .05). A 3D error of implant positioning was observed for the two impression techniques vs the reference model, with mean ± standard deviation (SD) error of 116 ± 94 μm and 56 ± 29 μm for the digital and conventional approaches, respectively (P = .01). In contrast, the inter-implant angulation errors were not significantly different between the two techniques (P = .83). Implant angulation did not have a significant influence on definitive cast accuracy within either technique (P = .64). The verification stent

  9. [Clinical experience of the use of agomelatine in the treatment of patients with depression and chronic brain ischemia].

    Science.gov (United States)

    Antonen, E G; Nikitina, M V; Kruchek, M M

    2015-01-01

    To study the efficacy and tolerability of agomelatine (valdoxan) in treatment of mild depressive states in patients with chronic brain ischemia (CBI). The study comprised 33 patients (23 women, 10 men, average age 54.5 years), including 12 people (36.4%) with CBI, stage I, and 21 (63.6%) with CBI, stage II. All patients had a single depressive episode of mild severity. Diagnosis of affective and cognitive impairment was carried out using clinical and neuropsychological methods (the Hamilton Depression Rating Scale (HDRS-17), the Hospital Anxiety and Depression Scale (HADS), the night sleep questionnaire developed by A.M. Vein, the Mini-mental state examination (MMSE), the modified Mini-Cog method, the Montreal Cognitive Assessment Scale (MoCA), the Clinical Global Impression scale (CGI-S, CGI-I) to assess the degree and dynamics of the disease, the Patient Global Impression (PGI) scale. The survey had been performed after 2,4 and 8 weeks of treatment. Agomelatine (valdoxan) was used 1 time per day in the evening in a dose of 25 mg (1 tablet). Agomelatine improved sleep from the second week of treatment, reduced anxiety symptoms after six weeks and depressive symptoms after eight weeks. The improvement of cognitive functions was noted as well. No side-effects was observed. The results revealed the high antidepressive activity of the drug in treatment of mild depressive states in patients with chronic brain ischemia, the balanced spectrum of effects on anxiety, depression, insomnia, the positive effect on cognitive functions that allows to recommend agomelatine in treatment of patients with CBI.

  10. Burger or yogurt? Indulgent consumption in impression management contexts.

    Science.gov (United States)

    Cheng, Yin-Hui; Huang, Molly C-J; Chuang, Shih-Chieh; Ju, Ying Rung

    2015-10-01

    We conducted three studies to investigate indulgent choice in settings with and without impression management by public-private manipulation with evaluation. Study 1 showed that the participants were less indulgent under public scrutiny due to the employment of impression management. Study 2 focused on the impression management context to test the moderate effect of self-consciousness in two impression managed contexts. Study 3 focused on context without impression management to test the moderate effects of self-awareness on choices. We found that depending on differences in primed personality, individuals tended to make choices other than those they favoured privately when anticipating that others might form impressions of them based on the decisions made. The findings of all three studies support our basic prediction that people are less indulgent under impression management and suggest that people tend to manage their impression by eating healthier (less indulgently) in public. © 2014 International Union of Psychological Science.

  11. The importance of a two-step impression procedure for complete denture fabrication: a systematic review of the literature.

    Science.gov (United States)

    Regis, R R; Alves, C C S; Rocha, S S M; Negreiros, W A; Freitas-Pontes, K M

    2016-10-01

    The literature has questioned the real need for some clinical and laboratory procedures considered essential for achieving better results for complete denture fabrication. The aim of this study was to review the current literature concerning the relevance of a two-step impression procedure to achieve better clinical results in fabricating conventional complete dentures. Through an electronic search strategy of the PubMed/MEDLINE database, randomised controlled clinical trials which compared complete denture fabrication in adults in which one or two steps of impressions occurred were identified. The selections were made by three independent reviewers. Among the 540 titles initially identified, four studies (seven published papers) reporting on 257 patients evaluating aspects such as oral health-related quality of life, patient satisfaction with dentures in use, masticatory performance and chewing ability, denture quality, direct and indirect costs were considered eligible. The quality of included studies was assessed according to the Cochrane guidelines. The clinical studies considered for this review suggest that a two-step impression procedure may not be mandatory for the success of conventional complete denture fabrication regarding a variety of clinical aspects of denture quality and patients' perceptions of the treatment. © 2016 John Wiley & Sons Ltd.

  12. A comparison of enhancement techniques for footwear impressions on dark and patterned fabrics.

    Science.gov (United States)

    Farrugia, Kevin J; Bandey, Helen; Dawson, Lorna; Daéid, Niamh Nic

    2013-11-01

    The use of chemical enhancement techniques on porous substrates, such as fabrics, poses several challenges predominantly due to the occurrence of background staining and diffusion as well as visualization difficulties. A range of readily available chemical and lighting techniques were utilized to enhance footwear impressions made in blood, soil, and urine on dark and patterned fabrics. Footwear impressions were all prepared at a set force using a specifically built footwear rig. In most cases, results demonstrated that fluorescent chemical techniques were required for visualization as nonfluorescent techniques provided little or no contrast with the background. Occasionally, this contrast was improved by oblique lighting. Successful results were obtained for the enhancement of footwear impressions in blood; however, the enhancement of footwear impressions in urine and soil on dark and patterned fabrics was much more limited. The results demonstrate that visualization and fluorescent enhancement on porous substrates such as fabrics is possible. © 2013 American Academy of Forensic Sciences.

  13. Comparison of digital scanning and polyvinyl siloxane impression techniques by dental students: instructional efficiency and attitudes towards technology.

    Science.gov (United States)

    Marti, A M; Harris, B T; Metz, M J; Morton, D; Scarfe, W C; Metz, C J; Lin, W-S

    2017-08-01

    With increasing use of digital scanning with restorative procedures in the dental office, it becomes necessary that educational institutions adopt instructional methodology for introducing this technology together with conventional impression techniques. To compare the time differences between instructing dental students on digital scanning (DS) (LAVA C.O.S. digital impression system) and a conventional impression technique (CI) (polyvinyl siloxane), and to compare students' attitudes and beliefs towards both techniques. Volunteer sophomore dental students (n = 25) with no prior experience in clinical impressions were recruited and IRB consent obtained. Participants responded to a pre-and post-exposure questionnaire. Participants were instructed on the use of both DS and CI for a single tooth full coverage crown restoration using a consecutive sequence of video lecture, investigator-led demonstration and independent impression exercise. The time necessary for each step (minutes) was recorded. Statistical significance was calculated using dependent t-tests (time measurements) and 2-sample Mann-Whitney (questionnaire responses). The time spent teaching students was greater for DS than CI for video lecture (15.95 and 10.07 min, P = 0.0000), demonstration time (9.06 and 4.70 min, P = 0.0000) and impression time (18.17 and 8.59 min, P = 0.0000). Prior to the instruction and practice, students considered themselves more familiar with CI (3.96) than DS (1.96) (P = 0.0000). After the instruction and practice, participants reported CI technique proved significantly easier than expected (pre-instruction: 3.52 and post-instruction: 4.08, P = 0.002). However, overall participants' perception of ease of use for DS was not influenced by this instruction and practice experience (pre-instruction: 3.84 and post-instruction: 3.56, P = 0.106). Despite the results, 96% of participants expressed an expectation that DS will become their predominant impression technique during their

  14. Perceiving active listening activates the reward system and improves the impression of relevant experiences.

    Science.gov (United States)

    Kawamichi, Hiroaki; Yoshihara, Kazufumi; Sasaki, Akihiro T; Sugawara, Sho K; Tanabe, Hiroki C; Shinohara, Ryoji; Sugisawa, Yuka; Tokutake, Kentaro; Mochizuki, Yukiko; Anme, Tokie; Sadato, Norihiro

    2015-01-01

    Although active listening is an influential behavior, which can affect the social responses of others, the neural correlates underlying its perception have remained unclear. Sensing active listening in social interactions is accompanied by an improvement in the recollected impressions of relevant experiences and is thought to arouse positive feelings. We therefore hypothesized that the recognition of active listening activates the reward system, and that the emotional appraisal of experiences that had been subject to active listening would be improved. To test these hypotheses, we conducted functional magnetic resonance imaging (fMRI) on participants viewing assessments of their own personal experiences made by evaluators with or without active listening attitude. Subjects rated evaluators who showed active listening more positively. Furthermore, they rated episodes more positively when they were evaluated by individuals showing active listening. Neural activation in the ventral striatum was enhanced by perceiving active listening, suggesting that this was processed as rewarding. It also activated the right anterior insula, representing positive emotional reappraisal processes. Furthermore, the mentalizing network was activated when participants were being evaluated, irrespective of active listening behavior. Therefore, perceiving active listening appeared to result in positive emotional appraisal and to invoke mental state attribution to the active listener.

  15. Divalproex Sodium for the Treatment of PTSD and Conduct Disordered Youth: A Pilot Randomized Controlled Clinical Trial

    Science.gov (United States)

    Steiner, Hans; Saxena, Kirti S.; Carrion, Victor; Khanzode, Leena A.; Silverman, Melissa; Chang, Kiki

    2007-01-01

    We examined the efficacy of divalproex sodium (DVP) for the treatment of PTSD in conduct disorder, utilizing a previous study in which 71 youth were enrolled in a randomized controlled clinical trial. Twelve had PTSD. Subjects (all males, mean age 16, SD 1.0) were randomized into high and low dose conditions. Clinical Global Impression (CGI)…

  16. Accuracy of a reformulated fast-set vinyl polysiloxane impression material using dual-arch trays.

    Science.gov (United States)

    Kang, Alex H; Johnson, Glen H; Lepe, Xavier; Wataha, John C

    2009-05-01

    A common technique used for making crown impressions involves use of a vinyl polysiloxane impression material in combination with a dual-arch tray. A leading dental manufacturer has reformulated its vinyl polysiloxane (VPS) impression line, but the accuracy of the new material has not been verified. The purpose of this study was to assess the accuracy of reformulated VPS impression materials using the single-step dual-arch impression technique. Dual-arch impressions were made on a typodont containing a master stainless steel standard crown preparation die, from which gypsum working dies were formed, recovered, and measured. The impression materials evaluated were Imprint 3 Penta Putty with Quick Step Regular Body (IP-0); Imprint 3 Penta Quick Step Heavy Body with Quick Step Light Body (IP-1); Aquasil Ultra Rigid Fast Set with LV Fast Set (AQ-1); and Aquasil Ultra Heavy Fast Set with XLV Fast Set (AQ-2) (n=10). All impressions were disinfected with CaviCide spray for 10 minutes prior to pouring with type IV gypsum. Buccolingual (BL), mesiodistal (MD), and occlusogingival (OG) dimensions were measured and compared to the master die using an optical measuring microscope. Linear dimensional change was also assessed for IP-0 and AQ-1 at 1 and 24 hours based on ANSI/ADA Specification No. 19. Single-factor ANOVA with Dunnett's T3 multiple comparisons was used to compare BL, MD, and OG changes, with hypothesis testing at alpha=.05. A repeated-measures ANOVA was used to compare linear dimensional changes. There were statistical differences among the 4 impression systems for 3 of 4 dimensions of the master die. IP-0 working dies were significantly larger in MD and OG-L dimensions but significantly smaller in the BL dimension. IP-1 working dies were significantly smaller in the BL dimension compared to the master die. With the exception of IP-0, differences detected were small and clinically insignificant. No significant differences were observed for linear dimensional change

  17. First Impressions.

    Science.gov (United States)

    Coen, Frank

    1969-01-01

    The unreliability of first impressions and subjective judgments is the subject of both Jane Austen's "Pride and Prejudice" and Lionel Trilling's "Of This Time, Of That Place"; consequently, the works are worthwhile parallel studies for high school students. Austen, by means of irony and subtle characterization, dramatizes the…

  18. An analysis of the persistent presence of opportunistic pathogens on patient-derived dental impressions and gypsum casts.

    Science.gov (United States)

    Egusa, Hiroshi; Watamoto, Takao; Abe, Keike; Kobayashi, Munemasa; Kaneda, Yoshitoshi; Ashida, Shunji; Matsumoto, Takuya; Yatani, Hirofumi

    2008-01-01

    This study aimed to assess the persistent presence of microorganisms on patient-derived dental impressions and gypsum casts, while highlighting important human pathogens such as Candida, methicillin-resistant Staphylococcus aureus (MRSA), and Pseudomonas aeruginosa. The practices and opinions regarding cross-infection control from 59 general dentists in Japan were obtained via a questionnaire. Alginate impressions were made from 56 patients. Using a brain heart infusion agar medium, impression and imprint cultures were carried out to visualize the microbial contamination on the surfaces of the impressions and gypsum casts, respectively. The colonies on the surfaces of the 30 impression cultures and 26 imprint cultures were collected by swabbing and then inoculated onto selective agar plates to detect streptococci, staphylococci, Candida, MRSA, and P aeruginosa. The questionnaire showed that only 54% of general dentists had a cross-infection policy in their dental clinics, and only 30% to 40% were aware of the possible persistence of MRSA or P aeruginosa on impressions and gypsum casts. The impression/imprint cultures grew a large number of visible bacterial colonies on all of impression/gypsum cast samples investigated. Selective agar cultures demonstrated the presence of streptococci (100, 100%), staphylococci (56.7, 65.4%), Candida (30, 46.2%), MRSA (26.7, 15.4%), and P aeruginosa (6.7, 7.7%) on the impressions and the gypsum casts, respectively. This investigation showed that patient-derived dental impressions and gypsum casts are contaminated with numerous microbes, including Candida, MRSA, and P aeruginosa, which are known pathogens responsible for nosocomial and/or life-threatening infection in the immunocompromised host.

  19. A simple method for fabricating custom sectional impression trays for making definitive impressions in patients with microstomia

    OpenAIRE

    Bachhav, Vinay Chila; Aras, Meena Ajay

    2012-01-01

    Objective: A maximum mouth opening that is smaller than the size of a complete denture can make prosthetic treatment challenging. This article describes a simple technique used to fabricate maxillary and mandibular custom sectional impression trays for making definitive impressions in patients with microstomia.

  20. Basic investigation of the laminated alginate impression technique: Setting time, permanent deformation, elastic deformation, consistency, and tensile bond strength tests.

    Science.gov (United States)

    Kitamura, Aya; Kawai, Yasuhiko

    2015-01-01

    Laminated alginate impression for edentulous is simple and time efficient compared to border molding technique. The purpose of this study was to examine clinical applicability of the laminated alginate impression, by measuring the effects of different Water/Powder (W/P) and mixing methods, and different bonding methods in the secondary impression of alginate impression. Three W/P: manufacturer-designated mixing water amount (standard), 1.5-fold (1.5×) and 1.75-fold (1.75×) water amount were mixed by manual and automatic mixing methods. Initial and complete setting time, permanent and elastic deformation, and consistency of the secondary impression were investigated (n=10). Additionally, tensile bond strength between the primary and secondary impression were measured in the following surface treatment; air blow only (A), surface baking (B), and alginate impression material bonding agent (ALGI-BOND: AB) (n=12). Initial setting times significantly shortened with automatic mixing for all W/P (p<0.05). The permanent deformation decreased and elastic deformation increased as high W/P, regardless of the mixing method. Elastic deformation significantly reduced in 1.5× and 1.75× with automatic mixing (p<0.05). All of these properties resulted within JIS standards. For all W/P, AB showed a significantly high bonding strength as compared to A and B (p<0.01). The increase of mixing water, 1.5× and 1.75×, resulted within JIS standards in setting time, suggesting its applicability in clinical setting. The use of automatic mixing device decreased elastic strain and shortening of the curing time. For the secondary impression application of adhesives on the primary impression gives secure adhesion. Copyright © 2014 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

  1. Effects of Music on Image Impression and Relationship between Impression and Physical Properties

    Science.gov (United States)

    Sato, Keiko; Mitsukura, Yasue

    Auditory information plays an integral role in AV media because even identical images are perceived differently when they are matched with different music. However, we now present a few studies in which the changes in subjective perceptions were analyzed on the basis of the physical properties of the perceived items. The purpose of this study is to investigate the effects of music on image impression in terms of the physical properties of images. In this paper, we first elucidate the changes in subjective impressions when the image is presented by itself and when it is presented with music. Secondly, to clarify the relation between the impression of an image or music and physical properties, we compare the different image or music perceptions with each other and also compare their respective physical properties, which include color information, structural information, and frequency characteristics. As a result, the color information of an image containing green or saturation colors and the power of the music were strongly correlated with adjectives expressing activity. Moreover, the entropy of saturation correlated with words expressing spatial extent.

  2. Digital versus conventional implant impressions for partially edentulous arches: An evaluation of accuracy.

    Science.gov (United States)

    Marghalani, Amin; Weber, Hans-Peter; Finkelman, Matthew; Kudara, Yukio; El Rafie, Khaled; Papaspyridakos, Panos

    2018-04-01

    Definition technique had the fewest 3D deviations compared with the other 2 techniques; however, the accuracy of all impression techniques was within clinically acceptable levels, and not all differences were statistically significant. Copyright © 2017 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

  3. 21 CFR 872.3670 - Resin impression tray material.

    Science.gov (United States)

    2010-04-01

    ... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3670 Resin impression tray material. (a) Identification. Resin impression tray material is a device intended for use in a two-step dental mold fabricating... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Resin impression tray material. 872.3670 Section...

  4. Can we measure patients' perception during dental impressions? The Burdens in Dental Impression-Making Questionnaire - BiDIM-Q.

    Science.gov (United States)

    Tsirogiannis, Panagiotis; Neophytou, Sophia; Reul, Anika; Heydecke, Guido; Reissmann, Daniel R

    2017-01-01

    To develop a reliable and valid instrument for the comprehensive assessment of patients' burdens during dental impression making, the Burdens in Dental Impression Making Questionnaire, BiDIM-Q. The item pool was generated in a convenience sample of 20 prosthodontic patients using semi-structured face-to-face interviews. The final instrument was tested in 145 consecutively recruited patients, and psychometric properties of the BiDIM-Q were determined. Four different impression materials were used according to the manufacturers' instructions and indications: alginate, c-silicone, polyvinylsiloxane, and polyether. The final BiDIM-Q consisting of 12 items showed sufficient reliability, indicated by Cronbach's alpha of .82 and an average inter-item correlation of .29. Validity was supported by Pearson correlation coefficients for the correlation between the instrument's total score with the patients' overall satisfaction rating (r=.63), and by the correlation matrix for the correlations of the patients' perceptions with the practitioners' satisfaction ratings. Overall, patient perceived burdens were low with highest burdens observed when using polyether in partially dentate patients for pick-up impressions, while lowest burdens were reported when using c-silicone for impressions of edentulous jaws. The BiDIM-Q is a reliable and valid tool for assessing patient-based process-related quality of care in dentistry allowing a deeper insight into patients' perspective during dental impression making. Copyright © 2016 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

  5. India's growing clinical research sector: opportunity for global companies.

    Science.gov (United States)

    Varawalla, Nermeen

    2007-06-01

    Backed by a compelling foundation of essential requirements necessary for effective clinical trial conduct, and aided by initiatives that address concerns of data quality, regulatory timelines and IP protection, the clinical development sector in India has experienced annual revenue growth rates of 25% in the past two to three years, and is poised to participate substantially in global drug development. As both clinical trial sponsors and CROs increase their research capabilities in India, the clinical development sector is facing challenges with staff resourcing and facilities. Existing initiatives in the clinical sector must continue, and further investment must be made by stakeholders to overcome the current limitations in sector growth. Furthermore, global organizations seeking to derive long-term sustainable revenue growth and competitive advantage in the global marketplace from their business units in India must establish an appropriate organizational culture and an effective intra-organizational and industry interface for their operations.

  6. Photogrammetry Impression Technique: A Case History Report.

    Science.gov (United States)

    Sánchez-Monescillo, Andrés; Sánchez-Turrión, Andrés; Vellon-Domarco, Elena; Salinas-Goodier, Carmen; Prados-Frutos, Juan Carlos

    2016-01-01

    The aim of this report is to present photogrammetry as a reliable step in the fabrication of a full-arch immediate rehabilitation. A 59-year-old man attended the department seeking dental rehabilitation for the sequelae of severe oral health neglect. The mandibular teeth suffered from advanced periodontal disease and the patient wore a maxillary complete denture. An irreversible hydrocolloid impression of the mandibular arch was made, poured in stone, and digitally scanned to create the first stereolithography (STL) file. All teeth with the exception of two retained as landmarks were extracted, and seven implants were placed under local anesthesia and their positions recorded using photogrammetry. Maxillary and mandibular dental arch alginate impressions were made, poured in laboratory stone, and scanned. A provisional restoration was placed 7 hours after surgery using the STL files to determine the best-fit line. Radiographic and clinical follow-up after 1 year showed a favorable evolution of the implants. No screw loosening or other mechanical or biologic complications were observed. The case history using the described system suggests certain advantages over conventional techniques. More research is needed to assess the possible benefits associated with photogrammetry when making implant-supported restorations.

  7. Lifting bloody footwear impressions using alginate casts followed by chemical enhancement.

    Science.gov (United States)

    Wiesner, Sarena; Izraeli, Elad; Shor, Yaron; Domb, Avi

    2013-05-01

    A method for lifting bloody footwear impressions using alginate casts and enhancing the lifted impressions with amido black is presented. On rough or dark substrates, background interferences may conceal significant details of footwear impressions. Illumination with alternative light sources and chemically enhancing the bloody footwear impressions may reveal additional details, but sometimes, lifting footwear impressions prior to enhancing is the only way to expose hidden details (by using blood reagents not adequate on the original). Several cast formulations were tested for lifting the footwear impressions. The best results were achieved using Aroma fine®. Enhancement of the footwear impressions was attempted with several reagents prior to lifting, during the casting process, and on the lifted footwear impressions. Applying amido black to footwear impressions lifted with alginate produced the sharpest and most detailed footwear impressions. Alginate castings followed by chemical enhancement with amido black may produce high-quality footwear impressions for comparison. © 2013 American Academy of Forensic Sciences.

  8. Maternal Impression Management in the Assessment of Childhood Depressive Symptomatology.

    Science.gov (United States)

    Lilly, Megan; Davis, Thompson E; Castagna, Peter J; Marker, Arwen; Davis, Allison B

    2018-02-27

    Self-report instruments are commonly used to assess for childhood depressive symptoms. Historically, clinicians have relied heavily on parent-reports due to concerns about childrens' cognitive abilities to understand diagnostic questions. However, parents may also be unreliable reporters due to a lack of understanding of their child's symptomatology, overshadowing by their own problems, and tendencies to promote themselves more favourably in order to achieve desired assessment goals. One such variable that can lead to unreliable reporting is impression management, which is a goal-directed response in which an individual (e.g. mother or father) attempts to represent themselves, or their child, in a socially desirable way to the observer. This study examined the relationship between mothers who engage in impression management, as measured by the Parenting Stress Index-Short Form defensive responding subscale, and parent-/child-self-reports of depressive symptomatology in 106 mother-child dyads. 106 clinic-referred children (mean child age = 10.06 years, range 7-16 years) were administered the Child Depression Inventory, and mothers (mean mother age = 40.80 years, range 27-57 years) were administered the Child-Behavior Checklist, Parenting Stress Index-Short Form, and Symptom Checklist-90-Revised. As predicted, mothers who engaged in impression management under-reported their child's symptomatology on the anxious/depressed and withdrawn subscales of the Child Behavior Checklist. Moreover, the relationship between maternal-reported child depressive symptoms and child-reported depressive symptoms was moderated by impression management. These results suggest that children may be more reliable reporters of their own depressive symptomatology when mothers are highly defensive or stressed.

  9. Early-Onset Bipolar Disorder: Characteristics and Outcomes in the Clinic.

    Science.gov (United States)

    Connor, Daniel F; Ford, Julian D; Pearson, Geraldine S; Scranton, Victoria L; Dusad, Asha

    2017-12-01

    To assess patient characteristics and clinician-rated outcomes for children diagnosed with early-onset bipolar disorder in comparison to a depressive disorders cohort from a single clinic site. To assess predictors of bipolar treatment response. Medical records from 714 consecutive pediatric patients evaluated and treated at an academic tertiary child and adolescent psychiatry clinic between 2006 and 2012 were reviewed. Charts of bipolar children (n = 49) and children with depressive disorders (n = 58) meeting study inclusion/exclusion criteria were compared on variables assessing clinical characteristics, treatments, and outcomes. Outcomes were assessed by using pre- and post-Clinical Global Impressions (CGI)-Severity and Children's Global Assessment Scale (CGAS) scores, and a CGI-Improvement score ≤2 at final visit determined responder status. Bipolar outcome predictors were assessed by using multiple linear regression. Clinic prevalence rates were 6.9% for early-onset bipolar disorder and 1.5% for very early-onset bipolar disorder. High rates of comorbid diagnoses, symptom severity, parental stress, and child high-risk behaviors were found in both groups. The bipolar cohort had higher rates of aggression and higher lifetime systems of care utilization. The final CGI and CGAS outcomes for unipolar depression patients differed statistically significantly from those for the bipolar cohort, reflecting better clinical status and more improvement at outcome for the depression patients. Both parent-reported Child Behavior Checklist total T-score at clinic admission and the number of lifetime systems-of-care for the child were significantly and inversely associated with improvement for the bipolar cohort. Early-onset bipolar disorder is a complex and heterogeneous psychiatric disorder. Evidence-based treatment should emphasize psychopharmacology with adjunctive family and individual psychotherapy. Strategies to improve engagement in treatment may be especially

  10. Assessing the accuracy of elastomeric Impression materials in reline method

    OpenAIRE

    MH. Shahrodi; M. Emamie

    1995-01-01

    The accuracy of relined impressions is usually acceptable and in some cases is even more accurate than principal impression. Relined Polysulfide and condensational silicone impressions are more accurate than polyether impressions. The reline method compared to retaking them is more economic and needs less chair time.

  11. Dental Students' Perceptions of Digital and Conventional Impression Techniques: A Randomized Controlled Trial.

    Science.gov (United States)

    Zitzmann, Nicola U; Kovaltschuk, Irina; Lenherr, Patrik; Dedem, Philipp; Joda, Tim

    2017-10-01

    The aim of this randomized controlled trial was to analyze inexperienced dental students' perceptions of the difficulty and applicability of digital and conventional implant impressions and their preferences including performance. Fifty undergraduate dental students at a dental school in Switzerland were randomly divided into two groups (2×25). Group A first took digital impressions in a standardized phantom model and then conventional impressions, while the procedures were reversed for Group B. Participants were asked to complete a VAS questionnaire (0-100) on the level of difficulty and applicability (user/patient-friendliness) of both techniques. They were asked which technique they preferred and perceived to be more efficient. A quotient of "effective scan time per software-recorded time" (TRIOS) was calculated as an objective quality indicator for intraoral optical scanning (IOS). The majority of students perceived IOS as easier than the conventional technique. Most (72%) preferred the digital approach using IOS to take the implant impression to the conventional method (12%) or had no preference (12%). Although total work was similar for males and females, the TRIOS quotient indicated that male students tended to use their time more efficiently. In this study, dental students with no clinical experience were very capable of acquiring digital tools, indicating that digital impression techniques can be included early in the dental curriculum to help them catch up with ongoing development in computer-assisted technologies used in oral rehabilitation.

  12. Accuracy of implant transfer with open-tray and closed-tray impression techniques and surface detail reproduction of the tooth during impression

    Directory of Open Access Journals (Sweden)

    Hakimeh Siadat

    2012-01-01

    Full Text Available Background and Aims: Accurate recording of implant location is required to achieve passive fit and have the implants without stress concentration. The aim of this in-vitro study was to evaluate the dimensional and angular accuracy of open-tray and closed-tray impression techniques using polyether impression material and also to assess the surface detail reproduction of the tooth while impression making.Materials and Methods: One reference metal model with 2 implants (Implantium on the position of the maxillary second premolar and first molar and one molar tooth for evaluation of surface details was prepared. 27 polyether impressions of these models were made (9 using open-tray, 9 using closed-tray techniques and 9 were made just of the surface of the teeth without any implants. Impressions were poured with ADA type IV stone. Coordinate Measuring Machine was used for measuring the dimensional accuracy and video measuring machine for surface detail reproduction. All of these measurements were compared with the measurements on the reference model. Data were analyzed by and compared by T-test and One-way ANOVA.Results: There was a significant statistical difference between open-tray and closed-tray techniques (P0.05.Conclusion: The accuracy of open-tray impression technique was more than closed-tray technique. The surface detail reproduction of the tooth was not affected by impression technique.

  13. A Validation Study of the Impression Replica Technique.

    Science.gov (United States)

    Segerström, Sofia; Wiking-Lima de Faria, Johanna; Braian, Michael; Ameri, Arman; Ahlgren, Camilla

    2018-04-17

    To validate the well-known and often-used impression replica technique for measuring fit between a preparation and a crown in vitro. The validation consisted of three steps. First, a measuring instrument was validated to elucidate its accuracy. Second, a specimen consisting of male and female counterparts was created and validated by the measuring instrument. Calculations were made for the exact values of three gaps between the male and female. Finally, impression replicas were produced of the specimen gaps and sectioned into four pieces. The replicas were then measured with the use of a light microscope. The values received from measuring the specimen were then compared with the values received from the impression replicas, and the technique was thereby validated. The impression replica technique overvalued all measured gaps. Depending on location of the three measuring sites, the difference between the specimen and the impression replicas varied from 47 to 130 μm. The impression replica technique overestimates gaps within the range of 2% to 11%. The validation of the replica technique enables the method to be used as a reference when testing other methods for evaluating fit in dentistry. © 2018 by the American College of Prosthodontists.

  14. Predictors for health improvement in patients with fibromyalgia: a 2-year follow-up study

    NARCIS (Netherlands)

    van Eijk-Hustings, Yvonne; Kroese, Mariëlle; Boonen, Annelies; Bessems-Beks, Monique; Landewé, Robert

    2015-01-01

    Fibromyalgia (FM) has a high impact on all aspects of health. The effect from interventions is usually small and characterized by uncertainty. Better insight in predictors for improved health is essential. The present study aimed to understand predictors for patient global impression of change and

  15. Re-Engineering Alzheimer Clinical Trials: Global Alzheimer's Platform Network.

    Science.gov (United States)

    Cummings, J; Aisen, P; Barton, R; Bork, J; Doody, R; Dwyer, J; Egan, J C; Feldman, H; Lappin, D; Truyen, L; Salloway, S; Sperling, R; Vradenburg, G

    2016-06-01

    Alzheimer's disease (AD) drug development is costly, time-consuming, and inefficient. Trial site functions, trial design, and patient recruitment for trials all require improvement. The Global Alzheimer Platform (GAP) was initiated in response to these challenges. Four GAP work streams evolved in the US to address different trial challenges: 1) registry-to-cohort web-based recruitment; 2) clinical trial site activation and site network construction (GAP-NET); 3) adaptive proof-of-concept clinical trial design; and 4) finance and fund raising. GAP-NET proposes to establish a standardized network of continuously funded trial sites that are highly qualified to perform trials (with established clinical, biomarker, imaging capability; certified raters; sophisticated management system. GAP-NET will conduct trials for academic and biopharma industry partners using standardized instrument versions and administration. Collaboration with the Innovative Medicines Initiative (IMI) European Prevention of Alzheimer's Disease (EPAD) program, the Canadian Consortium on Neurodegeneration in Aging (CCNA) and other similar international initiatives will allow conduct of global trials. GAP-NET aims to increase trial efficiency and quality, decrease trial redundancy, accelerate cohort development and trial recruitment, and decrease trial costs. The value proposition for sites includes stable funding and uniform training and trial execution; the value to trial sponsors is decreased trial costs, reduced time to execute trials, and enhanced data quality. The value for patients and society is the more rapid availability of new treatments for AD.

  16. Direct mechanical data acquisition of dental impressions for the manufacturing of CAD/CAM restorations.

    Science.gov (United States)

    Quaas, Sebastian; Rudolph, Heike; Luthardt, Ralph G

    2007-12-01

    The basic prerequisite for the production of dental restorations by means of CAD/CAM technologies is the data acquisition (digitization). Currently, two methods are available, i.e. the extraoral digitization of master casts and the direct intraoral data acquisition. However, it seems to be beneficial to immediately digitize impressions directly at the dental office in order to combine the high precision of mechanical digitizing methods and to shorten the production process. The aim of this study was to investigate the measurement uncertainty (+/-2sigma) and the three-dimensional accuracy of the immediate tactile in-office digitization of dental impressions and of the mechanical digitizing of ceramic master dies using a high-precision touch-probe digitizer. The experimental set-up consisted of ceramic master dies representing tooth 13 and 36 as well as their identical virtual models (CAD models). Fifteen one-step putty-wash impressions were taken from each tooth. The impressions as well as the ceramic master dies were digitized applying a standardized procedure. The datasets were aligned to the corresponding CAD models; then, a computer-aided three-dimensional analysis was performed. The digitizing of the dental impressions showed a measurement uncertainty of 5.8, mean positive deviations between 27 and 28microm, and mean negative deviations between -21 and -31microm. The digitizing of the ceramic master dies showed a measurement uncertainty of 2.8, mean positive deviations between 7.7 and 9.1microm, and mean negative deviations between -8.5 and -8.8microm. Mechanical digitizers show a very low measurement uncertainty and a high precision. The immediate tactile in-office digitization of impressions cannot be recommended as adequate data acquisition method for CAD/CAM restorations. It is recommendable to digitize clinical sites extraorally, i.e. after taking an impression and fabricating a model cast thereof.

  17. Impression cytology features of conjunctival nevi reported as more noticeable Características da citologia de impressão de nevos conjuntivais referidos como mais perceptíveis

    Directory of Open Access Journals (Sweden)

    Jeison de Nadai Barros

    2009-04-01

    Full Text Available PURPOSE: To report the impression cytology features of conjunctival nevi reported as more noticeable. METHODS: 35 patients who reported that a conjunctival lesion had become more noticeable after color or size change were enrolled. On slit-lamp examination, a clinical diagnosis of nevus was made and lesions underwent impression cytology using acetate cellulose strips and a combined staining with PAS, H&E and Papanicolaou. At patient's or parents' request, excision of the lesion was performed and the tissue was submitted to histopathological study. RESULTS: Impression cytology examination revealed nests or cluster of nevus cells within the epithelium layer containing or not mucous-secreting goblet cells in 32 cases (91.4%. Ten patients (28.5% had the tumor removed and histopathological diagnosis was compound nevus in 8 eyes (1 from caruncle, 1 from plica semilunaris and 6 from bulbar conjunctiva and subepithelial nevus from bulbar conjunctiva (2 eyes. CONCLUSION: Optical microscopy analysis of the impression cytology specimens confirmed the clinical diagnosis by demonstrating typical histopathological features of the superficial layers from conjunctival nevi in 91.4% of the cases. For amelanotic nevi IC can also allow a differential diagnosis from other nonpigmented lesions. The technique does not replace histopathological examination, but additionally, may assist in evaluating nevus cells in children and adults.OBJETIVO: Relatar as características da citologia de impressão de nevos conjuntivais referidos como mais perceptíveis. MÉTODOS: Trinta e cinco pacientes que notaram uma lesão conjuntival que se tornou mais perceptível, por mudança de cor ou de tamanho, foram avaliados. Ao exame biomicroscópico foi feito o diagnóstico clínico de nevo, sendo obtidas amostras de citologia de impressão das lesões com auxílio do papel filtro de acetato de celulose, coradas com PAS, H&E e Papanicolaou. Para os indivíduos que optaram também pela

  18. An innovative nonpharmacological intervention combined with intravenous patient-controlled analgesia increased patient global improvement in pain and satisfaction after major surgery

    Directory of Open Access Journals (Sweden)

    Chuang CC

    2017-04-01

    Full Text Available Chia-Chun Chuang,1 Chien-Ching Lee,1,2 Li-Kai Wang,1 Bor-Shyh Lin,2 Wen-Ju Wu,1 Chung-Han Ho,3 Jen-Yin Chen1,4 1Department of Anesthesiology, Chi Mei Medical Center, 2Department of Imaging and Biomedical Photonics, National Chiao Tung University, 3Department of Medical Research, Chi Mei Medical Center, 4Department of the Senior Citizen Service Management, Chia Nan University of Pharmacy and Science, Tainan, Taiwan, Republic of China Purpose: This study aimed to evaluate whether a nonpharmacological approach through implementation of a communication improvement program (named CICARE for Connect, Introduce, Communicate, Ask, Respond and Exit into standard operating procedure (SOP in acute pain service (APS improved satisfaction in patients receiving intravenous patient-controlled analgesia (IV-PCA.Patients and methods: This was a nonrandomized before–after study. Adult patients (aged between 20 and 80 years who received IV-PCA after major surgery were included. Implementing CICARE into SOP was conducted in APS. Anonymous questionnaires were used to measure outcomes in this prospective two-part survey. The first part completed by APS nurses contained patients’ characteristics, morphine dosage, delivery/demand ratios, IV-PCA side effects and pain at rest measured with an 11-point numeric rating scale (NRS, 0–10. A score of NRS ≥4 was defined as inadequately treated pain. The ten-question second part was completed by patients voluntarily after IV-PCA was discontinued. Each question was assessed with a 5-point Likert scale (1: extremely poor; 5: excellent. Patients were separated into “before” and “after” CICARE groups. Primary outcomes were patient global impression of improvement in pain (PGI-Improvement and patient satisfaction. Secondary outcomes included quality of communication skills, instrument proficiency and accessibility/availability of IV-PCA.Results: The response rate was 55.3%, with 187 usable questionnaires. CICARE

  19. Impression Management Training: Conceptualization and Application to Personal Selling.

    Science.gov (United States)

    Leathers, Dale G.

    1988-01-01

    Discusses the importance of impression management, an individual's conscious attempt to exercise control over selected communicative behaviors and cues for purposes of making a desired impression. Provides a comprehensive conceptualization of the impression-management process, and demonstrates how this process can facilitate effective training of…

  20. A comparison of the accuracy of polyether, polyvinyl siloxane, and plaster impressions for long-span implant-supported prostheses.

    Science.gov (United States)

    Hoods-Moonsammy, Vyonne J; Owen, Peter; Howes, Dale G

    2014-01-01

    The purpose of this study was to compare the capacity of different impression materials to accurately reproduce the positions of five implant analogs on a master model by comparing the resulting cast with the stainless steel master model. The study was motivated by the knowledge that distortions can occur during impression making and the pouring of casts and that this distortion may produce inaccuracies of subsequent restorations, especially long-span castings for implant superstructures. The master model was a stainless steel model with five implant analogs. The impression materials used were impression plaster (Plastogum, Harry J Bosworth), a polyether (Impregum Penta, 3M ESPE), and two polyvinyl siloxane (PVS) materials (Aquasil Monophase and Aquasil putty with light-body wash, Dentsply). Five impressions were made with each impression material and cast in die stone under strictly controlled laboratory conditions. The positions of the implants on the master model, the impression copings, and the implant analogs in the subsequent casts were measured using a coordinate measuring machine that measures within 4 μm of accuracy. Statistical analyses indicated that distortion occurred in all of the impression materials, but inconsistently. The PVS monophase material reproduced the master model most accurately. Although there was no significant distortion between the impressions and the master model or between the impressions and their casts, there were distortions between the master model and the master casts, which highlighted the cumulative effects of the distortions. The polyether material proved to be the most reliable in terms of predictability. The impression plaster displayed cumulative distortion, and the PVS putty with light body showed the least reliability. Some of the distortions observed are of clinical significance and likely to contribute to a lack of passive fit of any superstructure. The inaccuracy of these analog materials and procedures suggested

  1. Social relevance enhances memory for impressions in older adults.

    Science.gov (United States)

    Cassidy, Brittany S; Gutchess, Angela H

    2012-01-01

    Previous research has demonstrated that older adults have difficulty retrieving contextual material over items alone. Recent research suggests this deficit can be reduced by adding emotional context, allowing for the possibility that memory for social impressions may show less age-related decline than memory for other types of contextual information. Two studies investigated how orienting to social or self-relevant aspects of information contributed to the learning and retrieval of impressions in young and older adults. Participants encoded impressions of others in conditions varying in the use of self-reference (Experiment 1) and interpersonal meaningfulness (Experiment 2), and completed memory tasks requiring the retrieval of specific traits. For both experiments, age groups remembered similar numbers of impressions. In Experiment 1 using more self-relevant encoding contexts increased memory for impressions over orienting to stimuli in a non-social way, regardless of age. In Experiment 2 older adults had enhanced memory for impressions presented in an interpersonally meaningful relative to a personally irrelevant way, whereas young adults were unaffected by this manipulation. The results provide evidence that increasing social relevance ameliorates age differences in memory for impressions, and enhances older adults' ability to successfully retrieve contextual information.

  2. Impression Management and Organizational Performance: the Portuguese case

    OpenAIRE

    Borges, Maria de Fátima Ribeiro

    2013-01-01

    This study assesses the influence of performance in the adoption of impression management strategies. The study conducts a content analysis of a sample of 45 chairman’s statements, included in the annual reports for 2010 Portuguese companies in the non-finance sector. Findings indicate that performance does not explain impression management.Consistent with social psychology theory of impression management, larger companies present a favourable image of the firm, however consistent with ...

  3. Sport fans' impressions of gay male athletes.

    Science.gov (United States)

    Campbell, Jamonn; Cothren, Denise; Rogers, Ross; Kistler, Lindsay; Osowski, Anne; Greenauer, Nathan; End, Christian

    2011-01-01

    The purpose of this study was to examine sport fans' impressions of gay male athletes. Participants formed impressions of a fictional athlete from their favorite team after reading a short scenario about the player. The scenarios described the athlete as being gay or straight, and either becoming a distraction or not causing a distraction to the team. While males' ratings of the athlete did not significantly differ, female fans formed significantly more positive impressions of the gay male player than the straight athlete. These results are discussed in terms of the ingroup bias and the shifting culture of homophobia in sport.

  4. Impression cytology diagnosis of ulcerative eyelid malignancy.

    Science.gov (United States)

    Sen, S; Lyngdoh, A D; Pushker, N; Meel, R; Bajaj, M S; Chawla, B

    2015-02-01

    The utility of impression cytology in ocular diseases has predominantly been restricted to the diagnosis of dry eye, limbal stem cell deficiency and conjunctival neoplasias. Its role in malignant eyelid lesions remains largely unexplored. Although scrape cytology is more popular for cutaneous lesions, impression cytology, being non-traumatic, has an advantage in small and delicate areas such as the eyelid. The present study has been designed to evaluate its role in the diagnosis and management of malignant eyelid lesions. Thirty-two histopathologically proven malignant eyelid lesions diagnosed over a 2-year period, including 13 basal cell carcinomas, 11 sebaceous carcinomas, four squamous cell carcinomas, two malignant melanomas and two poorly differentiated carcinomas, formed the study group. The results of impression cytology were compared with those of histopathology in the study group and with an age- and sex-matched group of benign cases as controls. The sensitivity of impression cytology was 84% (27/32) for the diagnosis of malignancy and 28% (9/32) for categorization of the type of malignancy. Impression cytology is a simple, useful, non-invasive technique for the detection of malignant ulcerative eyelid lesions. It is especially useful as a follow-up technique for the detection of recurrences. © 2014 John Wiley & Sons Ltd.

  5. Quality improvement and emerging global health priorities

    Science.gov (United States)

    Mensah Abrampah, Nana; Syed, Shamsuzzoha Babar; Hirschhorn, Lisa R; Nambiar, Bejoy; Iqbal, Usman; Garcia-Elorrio, Ezequiel; Chattu, Vijay Kumar; Devnani, Mahesh; Kelley, Edward

    2018-01-01

    Abstract Quality improvement approaches can strengthen action on a range of global health priorities. Quality improvement efforts are uniquely placed to reorient care delivery systems towards integrated people-centred health services and strengthen health systems to achieve Universal Health Coverage (UHC). This article makes the case for addressing shortfalls of previous agendas by articulating the critical role of quality improvement in the Sustainable Development Goal era. Quality improvement can stimulate convergence between health security and health systems; address global health security priorities through participatory quality improvement approaches; and improve health outcomes at all levels of the health system. Entry points for action include the linkage with antimicrobial resistance and the contentious issue of the health of migrants. The work required includes focussed attention on the continuum of national quality policy formulation, implementation and learning; alongside strengthening the measurement-improvement linkage. Quality improvement plays a key role in strengthening health systems to achieve UHC. PMID:29873793

  6. Fabrication of customized sectional impression trays in management of patients with limited mouth opening: a simple and unique approach.

    Science.gov (United States)

    Krishna Ch, Vamsi; Mahendranadh Reddy, K; Gupta, Nidhi; Mahadev Shastry, Y; Chandra Sekhar, N; Aditya, Venkat; Reddy, G V K Mohan

    2013-01-01

    Impression making is not only important but is also the most significant step in the fabrication of any fixed or removable prosthesis. Proper impression making may be hindered by certain pathologic conditions. Reduced mouth opening is one of the common mechanical obstructions for proper orientation of the impression tray in the patient's mouth. In patients with trismus induced by submucous fibrosis, the procedure may be even more difficult to carry out because of reduced tissue resiliency and obliteration of vestibular spaces. Use of sectional trays offers one of the alternatives to overcome the problem of restricted mouth opening. Fabrication of customized impression trays according to the patient dentition improves the accuracy of impression making. The present case reports describe the fabrication of sectional custom trays designed for dentulous patients with chronic tobacco-induced submucous fibrosis.

  7. Complete Denture Impression Techniques Practiced by Private Dental Practitioners: A Survey

    OpenAIRE

    Kakatkar, Vinay R.

    2012-01-01

    Impression making is an important step in fabricating complete dentures. A survey to know the materials used and techniques practiced while recording complete denture impressions was conducted. It is disheartening to know that 33 % practitioners still use base plate custom trays to record final impressions. 8 % still use alginate for making final impressions. An acceptable technique for recording CD impressions is suggested.

  8. Randomized controlled within-subject evaluation of digital and conventional workflows for the fabrication of lithium disilicate single crowns. Part I: digital versus conventional unilateral impressions.

    Science.gov (United States)

    Benic, Goran I; Mühlemann, Sven; Fehmer, Vincent; Hämmerle, Christoph H F; Sailer, Irena

    2016-11-01

    Trials comparing the overall performance of fully digital and conventional workflows in reconstructive dentistry are needed. The purpose of the first part of this randomized controlled clinical trial was to determine whether optical impressions produce different results from conventional impressions with respect to time efficiency and patient and operator perceptions of the clinical workflow. Three digital impressions and 1 conventional impression were made in each of 10 participants according to a randomly generated sequence. The digital systems were Lava COS, iTero, and Cerec Bluecam. The conventional impression was made with the closed-mouth technique and polyvinyl siloxane material. The time needed for powdering, impressions, and interocclusal record was recorded. Patient and clinician perceptions of the procedures were rated by means of visual analog scales. The paired t test with Bonferroni correction was applied to detect differences (α=.05/6=.0083). The mean total working time ±standard deviation amounted to 260 ±66 seconds for the conventional impression, 493 ±193 seconds for Lava, 372 ±126 seconds for iTero, and 357 ±55 seconds for Cerec. The total working time for the conventional impression was significantly lower than that for Lava and Cerec. With regard to the working time without powdering, the differences between the methods were not statistically significant. The patient rating (very uncomfortable=0; comfortable=100) measured 61 ±34 for conventional impression, 71 ±18 for Lava, 66 ±20 for iTero, and 48 ±18 for Cerec. The differences were not statistically significant. The clinician rating (simple=0; very difficult=100) was 13 ±13 for the conventional impression, 54 ±27 for Lava, 22 ±11 for iTero, and 36 ±23 for Cerec. The differences between the conventional impression and Lava and between iTero and Lava were statistically significant. The conventional impression was more time-effective than the digital impressions. In terms of

  9. Comparison of marginal and internal fit of 3-unit ceramic fixed dental prostheses made with either a conventional or digital impression.

    Science.gov (United States)

    Su, Ting-Shu; Sun, Jian

    2016-09-01

    For 20 years, the intraoral digital impression technique has been applied to the fabrication of computer aided design and computer aided manufacturing (CAD-CAM) fixed dental prostheses (FDPs). Clinical fit is one of the main determinants of the success of an FDP. Studies of the clinical fit of 3-unit ceramic FDPs made by means of a conventional impression versus a digital impression technology are limited. The purpose of this in vitro study was to evaluate and compare the internal fit and marginal fit of CAD-CAM, 3-unit ceramic FDP frameworks fabricated from an intraoral digital impression and a conventional impression. A standard model was designed for a prepared maxillary left canine and second premolar and missing first premolar. The model was scanned with an intraoral digital scanner, exporting stereolithography (STL) files as the experimental group (digital group). The model was used to fabricate 10 stone casts that were scanned with an extraoral scanner, exporting STL files to a computer connected to the scanner as the control group (conventional group). The STL files were used to produce zirconia FDP frameworks with CAD-CAM. These frameworks were seated on the standard model and evaluated for marginal and internal fit. Each framework was segmented into 4 sections per abutment teeth, resulting in 8 sections per framework, and was observed using optical microscopy with ×50 magnification. Four measurement points were selected on each section as marginal discrepancy (P1), mid-axial wall (P2), axio-occusal edge (P3), and central-occlusal point (P4). Mean marginal fit values of the digital group (64 ±16 μm) were significantly smaller than those of the conventional group (76 ±18 μm) (Pdigital group (111 ±34 μm) were significantly smaller than those of the conventional group (132 ±44 μm) (Pdigital and conventional impressions showed clinically acceptable marginal and internal fit. The marginal and internal fit of frameworks fabricated from the intraoral

  10. Influence of Custom Trays, Dual-Arch Passive, Flexed Trays and Viscosities of Elastomeric Impression Materials on Working Dies

    Science.gov (United States)

    Kohli, Shivani; Kalsi, Rupali

    2016-01-01

    Introduction Dual arch impression technique signifies an essential improvement in fixed prosthodontics and has numerous benefits over conventional impression techniques. The accuracy of working dies fabricated from dual arch impression technique remains in question because there is little information available in the literature. Aim This study was conducted to compare the accuracy of working dies fabricated from impressions made from two different viscosities of impression materials using metal, plastic dual arch trays and custom made acrylic trays. Materials and Methods The study samples were grouped into two groups based on the viscosity of impression material used i.e. Group I (monophase), whereas Group II consisted of Dual Mix technique using a combination of light and heavy body material. These were further divided into three subgroups A, B and C depending on the type of impression tray used (metal dual arch tray, plastic dual arch tray and custom made tray). Measurements of the master cast were made using profile projector. Descriptive statistics like mean, Standard Deviation (SD) were calculated for all the groups. One way analysis of variance (ANOVA) was used for multiple group comparisons. A p-value of 0.05 or less was considered statistically significant. Results The gypsum dies obtained with the three types of impression trays using two groups of impression materials were smaller than the master models in dimensions. Conclusion The plastic dual arch trays produced dies which were the least accurate of the three groups. There was no significant difference in the die dimensions obtained using the two viscosities of impression materials. PMID:27437342

  11. Valuing Women in Management: An Impression Management Perspective of Gender Diversity.

    Science.gov (United States)

    Gardner, William L., III; And Others

    1994-01-01

    Applies a model of impression management to explore the process whereby women in organizations present themselves to others and the impressions they create. Devotes particular attention to how these impressions influence women's experiences in organizations. Suggests future research direction for clarifying the impact of gender impression and…

  12. Digital assessment of preliminary impression accuracy for edentulous jaws: Comparisons of 3-dimensional surfaces between study and working casts.

    Science.gov (United States)

    Matsuda, Takashi; Goto, Takaharu; Kurahashi, Kosuke; Kashiwabara, Toshiya; Watanabe, Megumi; Tomotake, Yoritoki; Nagao, Kan; Ichikawa, Tetsuo

    2016-07-01

    The aim of this study was to compare 3-dimensional surfaces of study and working casts for edentulous jaws and to evaluate the accuracy of preliminary impressions with a view to the future application of digital dentistry for edentulous jaws. Forty edentulous volunteers were serially recruited. Nine dentists took preliminary and final impressions in a routine clinical work-up. The study and working casts were digitized using a dental 3-dimensional scanner. The two surface images were superimposed through a least-square algorithm using imaging software and compared qualitatively. Furthermore, the surface of each jaw was divided into 6 sections, and the difference between the 2 images was quantitatively evaluated. Overall inspection showed that the difference around residual ridges was small and that around borders were large. The mean differences in the upper and lower jaws were 0.26mm and 0.45mm, respectively. The maximum values of the differences showed that the upward change mainly occurred in the anterior residual ridge, and the downward change mainly in the posterior border seal, and the labial and buccal vestibules, whereas every border of final impression was shortened in the lower jaw. The accuracy in all areas except the border, which forms the foundation, was estimated to be less than 0.25mm. Using digital technology, we here showed the overall and sectional accuracy of the preliminary impression for edentulous jaws. In our clinic, preliminary impressions have been made using an alginate material while ensuring that the requisite impression area was covered. Copyright © 2016 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

  13. Accuracy of stone casts obtained by different impression materials

    Directory of Open Access Journals (Sweden)

    Adriana Cláudia Lapria Faria

    2008-12-01

    Full Text Available Several impression materials are available in the Brazilian marketplace to be used in oral rehabilitation. The aim of this study was to compare the accuracy of different impression materials used for fixed partial dentures following the manufacturers' instructions. A master model representing a partially edentulous mandibular right hemi-arch segment whose teeth were prepared to receive full crowns was used. Custom trays were prepared with auto-polymerizing acrylic resin and impressions were performed with a dental surveyor, standardizing the path of insertion and removal of the tray. Alginate and elastomeric materials were used and stone casts were obtained after the impressions. For the silicones, impression techniques were also compared. To determine the impression materials' accuracy, digital photographs of the master model and of the stone casts were taken and the discrepancies between them were measured. The data were subjected to analysis of variance and Duncan's complementary test. Polyether and addition silicone following the single-phase technique were statistically different from alginate, condensation silicone and addition silicone following the double-mix technique (p .05 to alginate and addition silicone following the double-mix technique, but different from polysulfide. The results led to the conclusion that different impression materials and techniques influenced the stone casts' accuracy in a way that polyether, polysulfide and addition silicone following the single-phase technique were more accurate than the other materials.

  14. Custom sectional impression trays with interlocking type handle for microstomia patients

    Directory of Open Access Journals (Sweden)

    Fernandes Aquaviva

    2009-01-01

    Full Text Available Making impressions in microstomia patients is often cumbersome. A modification of standard impression procedure is often necessary while treating such patients. This article describes the fabrication of a custom sectional impression tray with interlocking type of a handle for definitive impression procedures in a microstomia patient.

  15. Evaluation of the effect scan pattern has on the trueness and precision of six intraoral digital impression systems.

    Science.gov (United States)

    Mennito, Anthony S; Evans, Zachary P; Lauer, Abigail W; Patel, Ravi B; Ludlow, Mark E; Renne, Walter G

    2018-03-01

    Clinicians have been slow to adopt digital impression technologies due possibly to perceived technique sensitivities involved in data acquisition. This research has two aims: determine whether scan pattern and sequence affects the accuracy of the three-dimensional (3D) model created from this digital impression and to compare the 5 imaging systems with regards to their scanning accuracy for sextant impressions. Six digital intraoral impression systems were used to scan a typodont sextant with optical properties similar to natural teeth. The impressions were taken using five different scan patterns and the resulting digital models were overlayed on a master digital model to determine the accuracy of each scanner performing each scan pattern. Furthermore, regardless of scan pattern, each digital impression system was evaluated for accuracy to the other systems in this same manner. No differences of significance were noted in the accuracy of 3D models created using six distinct scan patterns with one exception involving the CEREC Omnicam. Planmeca Planscan was determined to be the truest scanner while 3Shape Trios was determined to be the most precise for sextant impression making. Scan pattern does not significantly affect the accuracy of the resulting digital model for sextant scanning. Companies who make digital impression systems often recommend a scan pattern specific for their system. However, every clinical scanning scenario is different and may require a different approach. Knowing how important scan pattern is with regards to accuracy would be helpful for guiding a growing number of practitioners who are utilizing this technology. © 2018 Wiley Periodicals, Inc.

  16. THE USE OF A CODED HEALING ABUTMENT AS AN IMPRESSION COPING TO DESIGN AND MILL AN INDIVIDUALIZED ANATOMIC ABUTMENT : A CLINICAL REPORT

    NARCIS (Netherlands)

    Telleman, Gerdien; Raghoebar, Gerry M.; Vissink, Arjan; Meijer, Henny J. A.

    A coded implant healing abutment makes an impression at the implant level no longer necessary. An impression is made of the healing abutment, which is placed onto the implant directly after implant placement. The codes embedded in the occlusal surface of the healing abutment provide essential

  17. 17 CFR 200.61 - Impressions of influence.

    Science.gov (United States)

    2010-04-01

    ... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Impressions of influence. 200...; CONDUCT AND ETHICS; AND INFORMATION AND REQUESTS Canons of Ethics § 200.61 Impressions of influence. A... influence him, that any person unduly enjoys his favor or that he is affected in any way by the rank...

  18. Social impressions while drinking account for the relationship between alcohol-related problems and social anxiety.

    Science.gov (United States)

    Buckner, Julia D; Matthews, Russell A

    2012-04-01

    Individuals with elevated social anxiety appear particularly vulnerable to experiencing alcohol-related problems; yet we know little about factors that may account for this relationship. One possibility is that socially anxious individuals hold beliefs about the impressions they make on others while drinking and these beliefs play an important role in their drinking behaviors. The present study used exploratory factor analysis among participants with clinically elevated social anxiety (n=166) to develop a measure, the Social Impressions while Drinking Scale (SIDS), to assess beliefs regarding others' impressions of drinking behaviors that may be particularly relevant to socially anxious individuals. A valuations scale was also developed to assess the importance of each belief. Empirically-derived subscales were identified with adequate reliability. Among socially anxious participants, the Gregarious and Sexual Facilitation subscales were uniquely related to drinking problems and frequency respectively. Individuals with clinically meaningful social anxiety achieved higher scores on all SIDS subscales compared to those with lower social anxiety (n=166). Several SIDS scales mediated the relations between social anxiety group status and drinking problems (Interaction Fears, Observation Fears, Aggression, Gregariousness). Results highlight the importance of examining beliefs specific to high-risk populations in assessing their alcohol-related behaviors. Copyright © 2011 Elsevier Ltd. All rights reserved.

  19. IMPRESS: medical location-aware decision making during emergencies

    Science.gov (United States)

    Gkotsis, I.; Eftychidis, G.; Leventakis, G.; Mountzouris, M.; Diagourtas, D.; Kostaridis, A.; Hedel, R.; Olunczek, A.; Hahmann, S.

    2017-09-01

    Emergency situations and mass casualties involve several agencies and public authorities, which need to gather data from the incident scene and exchange geo-referenced information to provide fast and accurate first aid to the people in need. Tracking patients on their way to the hospitals can prove critical in taking lifesaving decisions. Increased and continuous flow of information combined by vital signs and geographic location of emergency victims can greatly reduce the response time of the medical emergency chain and improve the efficiency of disaster medicine activity. Recent advances in mobile positioning systems and telecommunications are providing the technology needed for the development of location-aware medical applications. IMPRESS is an advanced ICT platform based on adequate technologies for developing location-aware medical response during emergencies. The system incorporates mobile and fixed components that collect field data from diverse sources, support medical location and situation-based services and share information on the patient's transport from the field to the hospitals. In IMPRESS platform tracking of victims, ambulances and emergency services vehicles is integrated with medical, traffic and crisis management information into a common operational picture. The Incident Management component of the system manages operational resources together with patient tracking data that contain vital sign values and patient's status evolution. Thus, it can prioritize emergency transport decisions, based on medical and location-aware information. The solution combines positioning and information gathered and owned by various public services involved in MCIs or large-scale disasters. IMPRESS solution, were validated in field and table top exercises in cooperation with emergency services and hospitals.

  20. Conventional Vs Digital Impressions: Acceptability, Treatment Comfort and Stress Among Young Orthodontic Patients.

    Science.gov (United States)

    Mangano, Alessandro; Beretta, Matteo; Luongo, Giuseppe; Mangano, Carlo; Mangano, Francesco

    2018-01-01

    The objective of the present study was to compare patients' acceptability, comfort and stress with conventional and digital impressions. Thirty young orthodontic patients (15 males and 15 females) who had no previous experience of impressions were enrolled in this study. Conventional impressions for orthodontic study models of the dental arches were taken using an alginate impression material (Hydrogum ® , Zhermack Spa, Badia Polesine, Rovigo, Italy). Fifteen days later, digital impressions of both arches were acquired using an intraoral scanner (CS3600 ® , Carestream Dental, Rochester, NY, USA). Immediately after impression taking, patients' acceptability, comfort and stress were measured using two questionnaires and the State anxiety scale. Data showed no difference in terms of anxiety and stress; however, patients preferred the use of digital impressions systems instead of conventional impression techniques. Alginate impressions resulted as fast as digital impressions. Digital impressions resulted the most accepted and comfortable impression technique in young orthodontic patients, when compared to conventional techniques.

  1. Conventional Vs Digital Impressions: Acceptability, Treatment Comfort and Stress Among Young Orthodontic Patients

    Science.gov (United States)

    Mangano, Alessandro; Beretta, Matteo; Luongo, Giuseppe; Mangano, Carlo; Mangano, Francesco

    2018-01-01

    Objective: The objective of the present study was to compare patients’ acceptability, comfort and stress with conventional and digital impressions. Materials and Methods: Thirty young orthodontic patients (15 males and 15 females) who had no previous experience of impressions were enrolled in this study. Conventional impressions for orthodontic study models of the dental arches were taken using an alginate impression material (Hydrogum®, Zhermack Spa, Badia Polesine, Rovigo, Italy). Fifteen days later, digital impressions of both arches were acquired using an intraoral scanner (CS3600®, Carestream Dental, Rochester, NY, USA). Immediately after impression taking, patients’ acceptability, comfort and stress were measured using two questionnaires and the State anxiety scale. Results: Data showed no difference in terms of anxiety and stress; however, patients preferred the use of digital impressions systems instead of conventional impression techniques. Alginate impressions resulted as fast as digital impressions. Conclusions: Digital impressions resulted the most accepted and comfortable impression technique in young orthodontic patients, when compared to conventional techniques. PMID:29492177

  2. Effects of Milnacipran on Neurocognition, Pain, and Fatigue in Fibromyalgia: A 13-Week, Randomized, Placebo-Controlled, Crossover Trial

    Science.gov (United States)

    Kim, Jeong Lan; Rele, Shilpa; Marks, David M.; Masand, Prakash S.; Yerramsetty, Pallavi; Millet, Robert A.; Keefe, Richard S.

    2013-01-01

    Objective: To investigate whether milnacipran is safe and effective in improving cognitive function in patients with fibromyalgia. Method: Patients were randomly assigned to receive milnacipran or placebo for 6 weeks, followed by a 1-week washout and then crossover to the other arm for another 6 weeks. The overall trial lasted 13 weeks and was conducted between July 2011 and May 2013. Assessments were performed at each visit. Neurocognition was measured by the Brief Assessment of Cognition (BAC) and MATRICS. Pain was assessed by the visual analog scale (VAS) for pain. Global assessment of fibromyalgia symptoms was measured by the Fibromyalgia Impact Questionnaire (FIQ) and tender point examination. Depression was assessed by the Beck Depression Inventory (BDI). Fatigue was assessed by the Fatigue Severity Scale. Functional outcome was evaluated by the Health Assessment Questionnaire. The Clinical Global Impressions–Severity of Illness (CGI-S) and Improvement (CGI-I) scales and the Patients Clinical Global Impression of Change were used to measure the global impression of severity and improvement. Results: 26 subjects were screened, and 20 subjects completed the trial. The change in verbal memory (P = .001) and the composite T score (P = .044) of the BAC and the change in the attention-vigilance domain T score (P = .042) were significantly improved, but there were no differences between the drug and placebo groups. The changes in the CGI-S scores were not significant, but the changes in the Clinical Impression-Improvement (CGI-I) scores showed worsening in the placebo group at week 1 (P = .032), week 2 (P = .024), week 4 (P = .024), and week 6 (P = .60) compared to baseline. The change in FIQ scores was not significant. Conclusions: Milnacipran may have a potential role in the improvement of pain, disability, and mood. The effect of milnacipran on cognition in fibromyalgia needs further research. Trial Registration: ClinicalTrials.gov identifier: NCT01829243 PMID

  3. The fungicidal effect of ultraviolet light on impression materials

    International Nuclear Information System (INIS)

    Ishida, H.; Nahara, Y.; Tamamoto, M.; Hamada, T.

    1991-01-01

    The effects of ultraviolet (UV) light on fungi and impression materials were tested. UV light (250 microW/cm2) killed most Candida organisms (10(3) cells/ml) within 5 minutes. UV light (8000 microW/cm2) killed most C. albicans (10(7) cells/ml) within 2 minutes of exposure. The effect of UV light on dimensional change and surface roughness of impression materials (irreversible hydrocolloid, agar, and silicone rubber) was tested. The results showed that neither dimensional change nor surface roughness of the impression materials were affected. The results of this study indicate that UV light disinfects impression materials that are contaminated with Candida organisms

  4. Inherent variation in multiple shoe-sole test impressions.

    Science.gov (United States)

    Shor, Yaron; Wiesner, Sarena; Tsach, Tsadok; Gurel, Ron; Yekutieli, Yoram

    2018-04-01

    Shoeprints left at crime scenes are seldom perfect. Many prints are distorted or contaminated by various materials. Noisy background often contributes to vagueness on the shoeprints as well. Test impressions made from the suspect's shoes in the laboratory are considered a genuine replication of the shoe-sole. This naïve attitude is far from being correct. Consecutive test impressions made in the laboratory under strict similar conditions revealed differences among the exemplars of the same sole. Some of them are minor, but some are major, and can mislead the less experienced practitioners during the comparison process. This article focuses on the inherent within source variability between controlled shoeprints made from the same shoe, as it appears on the RACs. To describe and analyze this variability, repeated test impressions were prepared, and datasets were created. Several RACs were marked on each test impression, using an expert assisting software tool (developed in the authors' lab). The variance in repeated test impressions is demonstrated and possible sources are discussed. This variance should be considered when trying to establish the degree of matching between individual characteristics. Copyright © 2017. Published by Elsevier B.V.

  5. The global conduct of cancer clinical trials: challenges and opportunities.

    Science.gov (United States)

    Barrios, Carlos H; Werutsky, Gustavo; Martinez-Mesa, Jeovany

    2015-01-01

    The nature of clinical research has changed substantially over the last 2 decades, evolving from being centered almost exclusively in developed countries to a more global scenario that is increasingly involving less developed regions of the world. Pharmaceutical companies and some academic cooperative groups have been conducting challenging, large pivotal registration studies with multinational participation. The much more needed globalization of academic research demands particular attention and represents a worthwhile subject for a more profound discussion. The requirement of large sample sizes and the potential for fast recruitment leading to a speedy completion of clinical studies are probably the most important factors that have fueled globalization of studies. Reduced operational costs and the ability to expedite the regulatory approval of drugs in various countries or regions are also important drivers. Globalization of research should be seen as having a much wider effect in the societies involved, in particular, when we consider public health, economic, social, and ethical implications. Most importantly, the process of expanding the network of clinical research sites also fosters the integration and the development of closer relationships among investigators at a global level. We consider this an essential element that should remain a prominent element in the discussion. In this article, we address the underlying reasons for globalization and we highlight some of the scientific and ethical concerns arising as a consequence. Finally, some strategies to address and mitigate the challenges of conducting multinational clinical research are proposed.

  6. Accuracy of a self-perforating impression tray for dental implants.

    Science.gov (United States)

    Marotti, Juliana; Tortamano, Pedro; Castilho, Tatiana R R N; Steagall, Washington; Wolfart, Stefan; Haselhuhn, Klaus

    2014-10-01

    Difficulties are involved in impression making with conventional open impression trays. The purpose of this study was to evaluate the accuracy of transferring implant impressions with a self-perforating impression tray. A reference model of a mandible was fabricated, and 4 implants were placed in the regions of the first premolars and lateral incisors (implants 1, 2, 3, 4). Ten impressions of the reference model with polyvinyl siloxane were made for each group; control (conventional open impression tray) and test (self-perforating impression tray; Miratray Implant). A metal bar was screw-retained on implant 1, and the gaps generated at the vestibular face of implants 3 and 4 were measured by optical microcopy. The 2-way ANOVA and least square difference post hoc test were used (α=.05). Higher mean (±SD) values were obtained for the test group than for the control group for both implants: implant 3: 150 ±84 μm for the test group, 73 ±63 μm for the control group (P=.019); implant 4: 129 ±65 μm for the test group, 62 ±61 μm for the control group (P=.04). The self-perforating impression tray provided less accuracy than the conventional open tray. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

  7. A new method for the recovery and evidential comparison of footwear impressions using 3D structured light scanning.

    Science.gov (United States)

    Thompson, T J U; Norris, P

    2018-05-01

    Footwear impressions are one of the most common forms of evidence to be found at a crime scene, and can potentially offer the investigator a wealth of intelligence. Our aim is to highlight a new and improved technique for the recovery of footwear impressions, using three-dimensional structured light scanning. Results from this preliminary study demonstrate that this new approach is non-destructive, safe to use and is fast, reliable and accurate. Further, since this is a digital method, there is also the option of digital comparison between items of footwear and footwear impressions, and an increased ability to share recovered footwear impressions between forensic staff thus speeding up the investigation. Copyright © 2018 The Chartered Society of Forensic Sciences. Published by Elsevier B.V. All rights reserved.

  8. An omnibus test for the global null hypothesis.

    Science.gov (United States)

    Futschik, Andreas; Taus, Thomas; Zehetmayer, Sonja

    2018-01-01

    Global hypothesis tests are a useful tool in the context of clinical trials, genetic studies, or meta-analyses, when researchers are not interested in testing individual hypotheses, but in testing whether none of the hypotheses is false. There are several possibilities how to test the global null hypothesis when the individual null hypotheses are independent. If it is assumed that many of the individual null hypotheses are false, combination tests have been recommended to maximize power. If, however, it is assumed that only one or a few null hypotheses are false, global tests based on individual test statistics are more powerful (e.g. Bonferroni or Simes test). However, usually there is no a priori knowledge on the number of false individual null hypotheses. We therefore propose an omnibus test based on cumulative sums of the transformed p-values. We show that this test yields an impressive overall performance. The proposed method is implemented in an R-package called omnibus.

  9. Comparison of intraoral scanning and conventional impression techniques using 3-dimensional superimposition.

    Science.gov (United States)

    Rhee, Ye-Kyu; Huh, Yoon-Hyuk; Cho, Lee-Ra; Park, Chan-Jin

    2015-12-01

    The aim of this study is to evaluate the appropriate impression technique by analyzing the superimposition of 3D digital model for evaluating accuracy of conventional impression technique and digital impression. Twenty-four patients who had no periodontitis or temporomandibular joint disease were selected for analysis. As a reference model, digital impressions with a digital impression system were performed. As a test models, for conventional impression dual-arch and full-arch, impression techniques utilizing addition type polyvinylsiloxane for fabrication of cast were applied. 3D laser scanner is used for scanning the cast. Each 3 pairs for 25 STL datasets were imported into the inspection software. The three-dimensional differences were illustrated in a color-coded map. For three-dimensional quantitative analysis, 4 specified contact locations(buccal and lingual cusps of second premolar and molar) were established. For twodimensional quantitative analysis, the sectioning from buccal cusp to lingual cusp of second premolar and molar were acquired depending on the tooth axis. In color-coded map, the biggest difference between intraoral scanning and dual-arch impression was seen (Pimpression and the smallest difference was seen between dual-arch and full-arch impression. The two- and three-dimensional deviations between intraoral scanner and dual-arch impression was bigger than full-arch and dual-arch impression (P.05).

  10. In vivo precision of conventional and digital methods for obtaining quadrant dental impressions

    OpenAIRE

    Ender, Andreas; Zimmermann, Moritz; Attin, Thomas; Mehl, Albert

    2016-01-01

    OBJECTIVES Quadrant impressions are commonly used as alternative to full-arch impressions. Digital impression systems provide the ability to take these impressions very quickly; however, few studies have investigated the accuracy of the technique in vivo. The aim of this study is to assess the precision of digital quadrant impressions in vivo in comparison to conventional impression techniques. MATERIALS AND METHODS Impressions were obtained via two conventional (metal full-arch tray, CI, ...

  11. [Impression Formation in the Diagnosis and Treatment of Mental Disorders].

    Science.gov (United States)

    Linden, Michael; Dymke, Tina; Hüttner, Susanne; Schnaubelt, Sabine

    2016-06-01

    The first item of any psychopathological assessment is "general impression". There is some research under the heading of "impression formation" which shows that the outer appearance of a person decides about how a person is perceived by others and how others react. Impression formation is an important factor in social interaction. This is of special importance in mental disorders, which may express themselves in a distorted impression formation. As impression formation is by and large an emotional process, measurement can be done by adjective lists. An example is the bipolar MED rating scale. Such lists can be used in therapy to help patients and therapists to understand the problem and initiate modifications. A special group intervention in occupational therapy is described. Results suggest that impression formation is quite objective, that self- and observer judgments coincide and that therapy can help to adopt a less irritating outer appearance. © Georg Thieme Verlag KG Stuttgart · New York.

  12. Virtual First Impressions

    Science.gov (United States)

    Bergren, Martha Dewey

    2005-01-01

    Frequently, a nurse's first and only contact with a graduate school, legislator, public health official, professional organization, or school nursing colleague is made through e-mail. The format, the content, and the appearance of the e-mail create a virtual first impression. Nurses can manage their image and the image of the profession by…

  13. An In Vitro Comparison of the Marginal Adaptation Accuracy of CAD/CAM Restorations Using Different Impression Systems.

    Science.gov (United States)

    Shembesh, Marwa; Ali, Ala; Finkelman, Matthew; Weber, Hans-Peter; Zandparsa, Roya

    2017-10-01

    To compare the marginal adaptation of 3-unit zirconia fixed dental prostheses (FDPs) obtained from intraoral digital scanners (Lava True Definition, Cadent iTero), scanning of a conventional silicone impression, and the resulting master cast with an extraoral scanner (3Shape lab scanner). One reference model was fabricated from intact, non-carious, unrestored human mandibular left first premolar and first molar teeth (teeth #19 and 21), prepared for a three-unit all-ceramic FDP. Impressions of the reference model were obtained using four impression systems (n = 10), group 1 (PVS impression scan), group 2 (stone cast scan), group 3 (Cadent iTero), and group 4 (Lava True Defintion). Then the three-unit zirconia FDPs were milled. Marginal adaptation of the zirconia FDPs was evaluated using an optical comparator at four points on each abutment. The mean (SD) was reported for each group. One-way ANOVA was used to assess the statistical significance of the results, with post hoc tests conducted via Tukey's HSD. p impression scans 81.4 μm (6.8), Cadent iTero scan 62.4 μm (5.0), master cast scan 50.2 μm (6.1), and Lava True definition scan 26.6 μm (4.7). One-way ANOVA revealed significant differences (p impression scan, master cast scan, Lava True definition scan, iTero Cadent scan) were statistically significant (all p impression techniques was within the acceptable clinical limit (120 μm). Group 4 (Lava True Defintion) showed the lowest average gap among all groups followed by group 2 (stone cast scan), group 3 (Cadent iTero), and group 1 (PVS impression scan); these differences were statistically significant. © 2016 by the American College of Prosthodontists.

  14. Incorporating Experiential Learning Techniques to Improve Self-Efficacy in Clinical Special Care Dentistry Education.

    Science.gov (United States)

    Watters, Amber L; Stabulas-Savage, Jeanine; Toppin, James D; Janal, Malvin N; Robbins, Miriam R

    2015-09-01

    The New York University College of Dentistry has introduced a clinical rotation for fourth-year dental students that focuses on treating people with special health care needs (PSN). The aim of this study was to investigate the hypothesis that clinical experience in treating patients with special health care needs during predoctoral education is associated with increased self-assessed student ability and comfort and therefore self-efficacy. The study also investigated whether other characteristics, such as prior personal or volunteer experience with this population, service-mindedness, and/or the inclination to treat underserved populations, were associated with comfort in treating PSN. A survey was used to assess changes in students' perceived knowledge, beliefs, and attitudes regarding treating PSN before and after the clinical experience for July 2012-June 2013. The survey included questions about students' service-mindedness, comfort, perceptions of abilities of PSN and educational importance of learning to treat PSN, desire for clinical experience, and future intent or interest in treating PSN. Out of 364 students invited to participate, 127 surveys were returned, for a response rate of 34.9%. The results showed statistically significant increases on six items following training: impressions about the importance of oral health among PSN, comfort in treating people with cognitive disabilities and with medical complexities, intent to treat PSN in future practice, interest in including PSN in postgraduate training, and belief that PSN could be treated in the private practice setting. These students reported preferring to learn in the clinical setting over didactic instruction. This clinical experience was associated with improved self-efficacy in treating PSN and increased intentions to treat this population in future practice. Improvements were particularly evident among those with the least prior experience with PSN and were independent of other aspects of the

  15. Regionalizing global climate models

    NARCIS (Netherlands)

    Pitman, A.J.; Arneth, A.; Ganzeveld, L.N.

    2012-01-01

    Global climate models simulate the Earth's climate impressively at scales of continents and greater. At these scales, large-scale dynamics and physics largely define the climate. At spatial scales relevant to policy makers, and to impacts and adaptation, many other processes may affect regional and

  16. Adjunctive minocycline treatment for major depressive disorder: A proof of concept trial.

    Science.gov (United States)

    Dean, Olivia M; Kanchanatawan, Buranee; Ashton, Melanie; Mohebbi, Mohammadreza; Ng, Chee Hong; Maes, Michael; Berk, Lesley; Sughondhabirom, Atapol; Tangwongchai, Sookjaroen; Singh, Ajeet B; McKenzie, Helen; Smith, Deidre J; Malhi, Gin S; Dowling, Nathan; Berk, Michael

    2017-08-01

    Conventional antidepressant treatments result in symptom remission in 30% of those treated for major depressive disorder, raising the need for effective adjunctive therapies. Inflammation has an established role in the pathophysiology of major depressive disorder, and minocycline has been shown to modify the immune-inflammatory processes and also reduce oxidative stress and promote neuronal growth. This double-blind, randomised, placebo-controlled trial examined adjunctive minocycline (200 mg/day, in addition to treatment as usual) for major depressive disorder. This double-blind, randomised, placebo-controlled trial investigated 200 mg/day adjunctive minocycline (in addition to treatment as usual) for major depressive disorder. A total of 71 adults with major depressive disorder ( Diagnostic and Statistical Manual of Mental Disorders-Fourth Edition) were randomised to this 12-week trial. Outcome measures included the Montgomery-Asberg Depression Rating Scale (primary outcome), Clinical Global Impression-Improvement and Clinical Global Impression-Severity, Hamilton Anxiety Rating Scale, Quality of Life Enjoyment and Satisfaction Questionnaire, Social and Occupational Functioning Scale and the Range of Impaired Functioning Tool. The study was registered on the Australian and New Zealand Clinical Trials Register: www.anzctr.org.au , #ACTRN12612000283875. Based on mixed-methods repeated measures analysis of variance at week 12, there was no significant difference in Montgomery-Asberg Depression Rating Scale scores between groups. However, there were significant differences, favouring the minocycline group at week 12 for Clinical Global Impression-Improvement score - effect size (95% confidence interval) = -0.62 [-1.8, -0.3], p = 0.02; Quality of Life Enjoyment and Satisfaction Questionnaire score - effect size (confidence interval) = -0.12 [0.0, 0.2], p minocycline may be a useful adjunct to improve global experience, functioning and quality of life in people with

  17. The quality of impressions for crowns and bridges: an assessment of the work received at three commercial dental laboratories. assessing the quality of the impressions of prepared teeth.

    Science.gov (United States)

    Storey, D; Coward, T J

    2013-06-01

    The literature is limited in studies directly assessing the quality of impressions for crowns and bridges in the UK. The aim of the study was to assess the quality of impressions for conventional crown and bridgework received by commercial dental laboratories. Three dental laboratories were visited over a 3-month period. All impressions for conventional crowns and bridges that arrived on the days of the visits were examined prior to any laboratory processing. A total of 206 impression cases were examined and assessed against criteria laid out in a custom-designed assessment form. Defects were commonly found in the recording of prepared teeth. Overall, 44.2% of impression cases were unsatisfactory. NHS impressions were more than twice as likely to be unsatisfactory compared to private impressions. If the results of this survey are typical then the general quality of impressions for fixed crown and bridgework is unacceptable. This is particularly true for work completed under the NHS contract.

  18. Efficacy of Hippotherapy Versus Pharmacotherapy in Attention-Deficit/Hyperactivity Disorder: A Randomized Clinical Trial.

    Science.gov (United States)

    Oh, Yunhye; Joung, Yoo-Sook; Jang, Byongsu; Yoo, Jae Hyun; Song, Jihye; Kim, Jiwon; Kim, Kiho; Kim, Seonwoo; Lee, Jiyoung; Shin, Hye-Yeon; Kwon, Jeong-Yi; Kim, Yun-Hee; Jeong, Bumseok

    2018-04-11

    Pharmacotherapy among children with attention-deficit/hyperactivity disorder (ADHD) is effective, but many patients suffer from secondary psychiatric problems even after improvement of ADHD core symptoms. Hippotherapy have been used as adjunct treatment options for physical and psychosocial rehabilitation as well as to ameliorate core symptoms. The aim of this study was to investigate the effects of Hippotherapy versus pharmacotherapy for children with ADHD. Thirty-four participants with ADHD were randomly assigned at a 1:1 ratio to either 24 sessions of a twice-weekly hippotherapy or pharmacotherapy. To assess therapeutic effects, the ADHD Rating Scale (ARS) was used pretreatment and posttreatment as the primary outcome measure. Secondary outcomes included the Child Behavior Checklist (CBCL), Self-Esteem Scale (SES), Pediatric Quality of Life Inventory (PedsQL) child and parent report version, Developmental Coordination Disorder Questionnaire (DCDQ), Clinical Global Impressions-Severity (CGI-S), and quantitative electroencephalography. Both groups showed marked improvements in ADHD symptoms, CGI-S. No significant differences between groups were detected regarding treatment outcome except thought problem subscales of CBCL. Twelve weeks of hippotherapy improved attention, impulsivity/hyperactivity, and quality of life. This trial is promising, but further studies are required to evaluate the long-term clinical effectiveness of hippotherapy. The study is registered with ClinicalTrials.gov, number NCT 02482649.

  19. Trueness and precision of digital impressions obtained using an intraoral scanner with different head size in the partially edentulous mandible.

    Science.gov (United States)

    Hayama, Hironari; Fueki, Kenji; Wadachi, Juro; Wakabayashi, Noriyuki

    2018-03-01

    It remains unclear whether digital impressions obtained using an intraoral scanner are sufficiently accurate for use in fabrication of removable partial dentures. We therefore compared the trueness and precision between conventional and digital impressions in the partially edentulous mandible. Mandibular Kennedy Class I and III models with soft silicone simulated-mucosa placed on the residual edentulous ridge were used. The reference models were converted to standard triangulated language (STL) file format using an extraoral scanner. Digital impressions were obtained using an intraoral scanner with a large or small scanning head, and converted to STL files. For conventional impressions, pressure impressions of the reference models were made and working casts fabricated using modified dental stone; these were converted to STL file format using an extraoral scanner. Conversion to STL file format was performed 5 times for each method. Trueness and precision were evaluated by deviation analysis using three-dimensional image processing software. Digital impressions had superior trueness (54-108μm), but inferior precision (100-121μm) compared to conventional impressions (trueness 122-157μm, precision 52-119μm). The larger intraoral scanning head showed better trueness and precision than the smaller head, and on average required fewer scanned images of digital impressions than the smaller head (pdigital impressions. Digital impressions are partially comparable to conventional impressions in terms of accuracy; the use of a larger scanning head may improve the accuracy for removable partial denture fabrication. Copyright © 2018 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

  20. IMPRESS Integrated Project-An overview paper

    International Nuclear Information System (INIS)

    Jarvis, D.J.; Voss, D.

    2005-01-01

    IMPRESS is an acronym for Intermetallic Materials Processing in Relation to Earth and Space Solidification. This project was selected by the European Commission and recently started in November 2004. The main scientific objective of IMPRESS is to gain a better understanding of the links between materials processing routes, structure and final properties of intermetallic alloys. Technically speaking, the project aims to develop and test two distinct prototypes based on intermetallic materials, namely gas turbine blades and Raney-type catalytic powder. Numerous material processing routes are being explored within the project with a strong emphasis on solidification. For turbine blade manufacturing, the principal processes under study are tilt casting, counter-gravity casting and centrifugal casting. For catalytic powder production, the focus is placed on gas atomisation and vapour condensation processes. IMPRESS combines a wide range of fundamental studies of solidification both on ground and in space, as well as industrial process development. This paper will describe some of the different facets related to solidification

  1. Accuracy of five implant impression technique: effect of splinting materials and methods

    Science.gov (United States)

    Cho, Sung-Bum

    2011-01-01

    PURPOSE The aim of this study was to evaluate the effect of dimensional stability of splinting material on the accuracy of master casts. MATERIALS AND METHODS A stainless steel metal model with 6 implants embedded was used as a master model. Implant level impressions were made after square impression copings were splinted using 5 different techniques as follows. (1) Splinted with autopolymerizing resin and sectioned, reconnected to compensate polymerization shrinkage before the impression procedure. (2) Splinted with autopolymerizing resin just before impression procedure. (3) Primary impression made with impression plaster and secondary impression were made over with polyether impression material. (4) Splinted with impression plaster. (5) Splinted with VPS bite registration material. From master model, 5 impressions and 5 experimental casts, total 25 casts were made for each of 5 splinting methods. The distortion values of each splinting methods were measured using coordinate measuring machine, capable of recordings in the x-, y-, z-axes. A one-way analysis of variance (ANOVA) at a confidence level of 95% was used to evaluate the data and Tukey's studentized range test was used to determine significant differences between the groups. RESULTS Group 1 showed best accuracy followed by Group 3 & 4. Group 2 and 5 showed relatively larger distortion value than other groups. No significant difference was found between group 3, 4, 5 in x-axis, group 2, 3, 4 in y-axis and group 1, 3, 4, 5 in z-axis (Pimpression copings with autopolymerizing resin following compensation of polymerization shrinkage and splinting method with impression plaster can enhance the accuracy of master cast and impression plaster can be used simple and effective splinting material for implant impression procedure. PMID:22259700

  2. FTA liver impressions as DNA template for detecting and genotyping fowl adenovirus.

    Science.gov (United States)

    Moscoso, Hugo; Bruzual, Jose J; Sellers, Holly; Hofacre, Charles L

    2007-03-01

    The feasibility of using liver impressions on Flinders Technology Associates (FTA filter paper for the collection, inactivation, and molecular analysis of fowl adenovirus (FAV) was evaluated. FAV I European Union (EU) serotype 1 spotted on FTA was shown to be inactivated using specific-pathogen-free (SPF) primary chicken embryo liver cell culture as indicated by absence of cytopathic effect. Sensitivity of the polymerase chain reaction (PCR) test using tenfold dilutions of allantoic fluid from 100 to 10-4 for the detection of adenovirus serotype 1 on FTA cards was determined to be 0.0005 mean tissue culture infectious dose per FTA spot. The stability of the DNA from liver impressions on the FTA was found to be 198 days when stored at -20 degrees C. In a trial, inclusion body hepatitis (IBH) was experimentally reproduced in SPF chickens inoculated with FAV I EU serogroup 1, 4, 8, or 11, which presented weakness, pallor, depression, dehydration, and mortality within 6 days after inoculation. PCR performed on FTA liver impressions from the inoculated birds was able to detect all four viruses, and the nucleotide sequence analysis of the amplified PCR products (1219 bp of the hexone gene) revealed the expected serotypes. In addition to the trial, 55 clinical samples were analyzed from liver impressions on FTA cards, and FAV was detected in 11 of 55 (20%). Sequencing analysis showed that the viruses were EU serotypes 4, 5, 9, and 10. The results demonstrate that FTA filter paper inactivates the FAV I and maintains the DNA template for molecular analysis.

  3. A six-month double-blind, placebo-controlled, randomized clinical trial of duloxetine for the treatment of fibromyalgia

    Directory of Open Access Journals (Sweden)

    Amy S Chappell

    2008-12-01

    Full Text Available Amy S Chappell1, Laurence A Bradley2, Curtis Wiltse1, Michael J Detke1,3,4, Deborah N D’Souza1, Michael Spaeth51Lilly Research Laboratories, Indianapolis, IN, USA; 2University of Alabama at Birmingham, Birmingham, Alabama, USA; 3Indiana University School of Medicine, Indianapolis, IN, USA; 4Harvard Medical School, Boston, MA, USA; 5Practice for Internal Medicine/Rheumatology, Graefelfing, GermanyObjective: Assess the efficacy of duloxetine 60/120 mg (N = 162 once daily compared with placebo (N = 168 in the treatment of patients with fibromyalgia, during six months of treatment.Methods: This was a phase-III, randomized, double-blind, placebo-controlled, parallel-group study assessing the efficacy and safety of duloxetine.Results: There were no significant differences between treatment groups on the co-primary efficacy outcome measures, change in the Brief Pain Inventory (BPI average pain severity from baseline to endpoint (P = 0.053 and the Patient’s Global Impressions of Improvement (PGI-I at endpoint (P = 0.073. Duloxetine-treated patients improved significantly more than placebo-treated patients on the Fibromyalgia Impact Questionnaire pain score, BPI least pain score and average interference score, Clinical Global Impressions of Severity scale, area under the curve of pain relief, Multidimensional Fatigue Inventory mental fatigue dimension, Beck Depression Inventory-II total score, and 36-item Short Form Health Survey mental component summary and mental health score. Nausea was the most common treatment-emergent adverse event in the duloxetine group. Overall discontinuation rates were similar between groups.Conclusions: Although duloxetine 60/120 mg/day failed to demonstrate significant improvement over placebo on the co-primary outcome measures, in this supportive study, duloxetine demonstrated significant improvement compared with placebo on numerous secondary measures.Keywords: fibromyalgia, duloxetine, placebo, double-blind, trial

  4. Comparison of intraoral scanning and conventional impression techniques using 3-dimensional superimposition

    Science.gov (United States)

    Rhee, Ye-Kyu

    2015-01-01

    PURPOSE The aim of this study is to evaluate the appropriate impression technique by analyzing the superimposition of 3D digital model for evaluating accuracy of conventional impression technique and digital impression. MATERIALS AND METHODS Twenty-four patients who had no periodontitis or temporomandibular joint disease were selected for analysis. As a reference model, digital impressions with a digital impression system were performed. As a test models, for conventional impression dual-arch and full-arch, impression techniques utilizing addition type polyvinylsiloxane for fabrication of cast were applied. 3D laser scanner is used for scanning the cast. Each 3 pairs for 25 STL datasets were imported into the inspection software. The three-dimensional differences were illustrated in a color-coded map. For three-dimensional quantitative analysis, 4 specified contact locations(buccal and lingual cusps of second premolar and molar) were established. For twodimensional quantitative analysis, the sectioning from buccal cusp to lingual cusp of second premolar and molar were acquired depending on the tooth axis. RESULTS In color-coded map, the biggest difference between intraoral scanning and dual-arch impression was seen (Pimpression and the smallest difference was seen between dual-arch and full-arch impression. CONCLUSION The two- and three-dimensional deviations between intraoral scanner and dual-arch impression was bigger than full-arch and dual-arch impression (P.05). PMID:26816576

  5. Digital vs. conventional full-arch implant impressions: a comparative study.

    Science.gov (United States)

    Amin, Sarah; Weber, Hans Peter; Finkelman, Matthew; El Rafie, Khaled; Kudara, Yukio; Papaspyridakos, Panos

    2017-11-01

    To test whether or not digital full-arch implant impressions with two different intra-oral scanners (CEREC Omnicam and True Definition) have the same accuracy as conventional ones. The hypothesis was that the splinted open-tray impressions would be more accurate than digital full-arch impressions. A stone master cast representing an edentulous mandible using five internal connection implant analogs (Straumann Bone Level RC, Basel, Switzerland) was fabricated. The three median implants were parallel to each other, the far left implant had 10°, and the far right had 15° distal angulation. A splinted open-tray technique was used for the conventional polyether impressions (n = 10) for Group 1. Digital impressions (n = 10) were taken with two intra-oral optical scanners (CEREC Omnicam and 3M True Definition) after connecting polymer scan bodies to the master cast for groups 2 and 3. Master cast and conventional impression test casts were digitized with a high-resolution reference scanner (Activity 880 scanner; Smart Optics, Bochum, Germany) to obtain digital files. Standard tessellation language (STL) datasets from the three test groups of digital and conventional impressions were superimposed with the STL dataset from the master cast to assess the 3D deviations. Deviations were recorded as root-mean-square error. To compare the master cast with conventional and digital impressions at the implant level, Welch's F-test was used together with Games-Howell post hoc test. Group I had a mean value of 167.93 μm (SD 50.37); Group II (Omnicam) had a mean value of 46.41 μm (SD 7.34); Group III (True Definition) had a mean value of 19.32 μm (SD 2.77). Welch's F-test was used together with the Games-Howell test for post hoc comparisons. Welch's F-test showed a significant difference between the groups (P digital implant impressions using True Definition scanner and Omnicam were significantly more accurate than the conventional impressions with the splinted open

  6. Evaluation of the Efficacy of Different Mixing Techniques and Disinfection on Microbial Colonization of Polyether Impression Materials: A Comparative Study.

    Science.gov (United States)

    Singla, Youginder; Pachar, Renu B; Poriya, Sangeeta; Mishra, Aalok; Sharma, Rajni; Garg, Anshu

    2018-03-01

    This study aims to determine the role of mixing techniques of polyether impression materials and efficacy of disinfection on microbial colonization of these impression materials. Polyether impression material was mixed using two methods: First by hand mixing (group I) and second using an automixer (group II) with a total of 100 samples. Four microbial strains were studied, which included Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans. After incubation, the bacterial colonies were counted, and then, disinfectant solution was applied. The effect of disinfection solution was evaluated for each specimen. The surface of polyether impression materials mixed with an automixer has less number of voids and overall a smoother surface as compared with the hand-mixed ones. On comparing the disinfection procedures, i.e., specimens without any disinfection and specimens after disinfection, statistically highly significant difference was seen between all the groups. We can conclude that impression mixing procedures are important in determining the surface characteristics of the impression and ultimately the colonization of bacteria and also determine the importance of disinfection on microbial colonization. This study emphasises the deleterious role of nosocomial infections and specific measures that should be taken regarding the prevention of such diseases. Dental impressions are proved to be a source of such infections and may lead to transmission of such diseases. Thus, proper measures should be taken right from the first step of impression taking to minimizing and preventing such kind of contaminations in clinical practice.

  7. First impression at stroke onset plays an important role in early hospital arrival.

    Science.gov (United States)

    Iguchi, Yasuyuki; Wada, Kuniyasu; Shibazaki, Kensaku; Inoue, Takeshi; Ueno, Yuji; Yamashita, Shinji; Kimura, Kazumi

    2006-01-01

    Treatment for acute ischemic stroke should be administered as soon as possible after symptom onset. The aim of this study was to investigate whether or not the patient's and bystander's first impression at stroke onset was associated with hospital arrival time. To investigate the factors influencing the prehospital delay, we prospectively interviewed consecutive stroke patients and bystanders about their first impression at the stroke onset and assessed the methods of transportation, and clinical characteristics. Early arrival was defined as a hospital arrival of within 2 h from stroke onset. One hundred thirty patients were enrolled: 82% were ischemic stroke and 18% were cerebral hemorrhage. The median interval between symptom onset and the hospital arrival was 7.5 h and 30% of patients presented within 2 h of stroke onset. First impression of stroke (odds ratios [OR] 4.56, 95% confidence interval [CI] 1.54-13.5, p=0.006), presence of consciousness disturbance (OR 4.29, CI 1.39-13.3, p=0.011), arrival through other facilities (OR 0.25, CI 0.08-0.76, p=0.015), a history of diabetes (OR 0.23, CI 0.06-0.80, p=0.028) and nocturnal onset (OR 0.19, CI 0.04-0.88, p=0.042) independently contributed to the early arrival. The first impression of patients and bystanders at stroke onset is important in order to reach hospital earlier in Japan. Public educational systems such as those, which advertise stroke warning signs, are necessary.

  8. Determination of minimal clinically important change in early and advanced Parkinson's disease.

    Science.gov (United States)

    Hauser, Robert A; Auinger, Peggy

    2011-04-01

    Two common primary efficacy outcome measures in Parkinson's disease (PD) are change in Unified Parkinson's Disease Rating Scale (UPDRS) scores in early PD and change in "off" time in patients with motor fluctuations. Defining the minimal clinically important change (MCIC) in these outcome measures is important to interpret the clinical relevance of changes observed in clinical trials and other situations. We analyzed data from 2 multicenter, placebo-controlled, randomized clinical trials of rasagiline; TEMPO studied 404 early PD subjects, and PRESTO studied 472 levodopa-treated subjects with motor fluctuations. An anchor-based approach using clinical global impression of improvement (CGI-I) was used to determine MCIC for UPDRS scores and daily "off" time. MCIC was defined as mean change in actively treated subjects rated minimally improved on CGI-I. Receiver operating characteristic (ROC) curves defined optimal cutoffs discriminating between changed and unchanged subjects. MCIC for improvement in total UPDRS score (parts I-III) in early PD was determined to be -3.5 points based on mean scores and -3.0 points based on ROC curves. In addition, we found an MCIC for reduction in "off" time of 1.0 hours as defined by mean reduction in "off" time in active treated subjects self-rated as minimally improved on CGI-I minus mean reduction in "off" time in placebo-treated subjects self-rated as unchanged (1.9-0.9 hours). We hypothesize that many methodological factors can influence determination of the MCIC, and a range of values is likely to emerge from multiple studies. Copyright © 2011 Movement Disorder Society.

  9. An Effective Model for Improving Global Health Nursing Competence.

    Science.gov (United States)

    Kang, Sun-Joo

    2016-01-01

    This paper proposed an effective model for improving global health nursing competence among undergraduate students. A descriptive case study was conducted by evaluation of four implemented programs by the author. All programs were conducted with students majoring in nursing and healthcare, where the researcher was a program director, professor, or facilitator. These programs were analyzed in terms of students' needs assessment, program design, and implementation and evaluation factors. The concept and composition of global nursing competence, identified within previous studies, were deemed appropriate in all of our programs. Program composition varied from curricular to extracurricular domains. During the implementation phase, some of the programs included non-Korean students to improve cultural diversity and overcome language barriers. Qualitative and quantitative surveys were conducted to assess program efficacy. Data triangulation from students' reflective journals was examined. Additionally, students' awareness regarding changes within global health nursing, improved critical thinking, cultural understanding, and global leadership skills were investigated pre- and post-program implementation. The importance of identifying students' needs regarding global nursing competence when developing appropriate curricula is discussed.

  10. An Effective Model for Improving Global Health Nursing Competence

    Directory of Open Access Journals (Sweden)

    Sunjoo Kang

    2016-09-01

    Full Text Available This paper developed an effective model for improving global health nursing competence among undergraduate students. A descriptive case study was conducted by implementing four programs. All programs were conducted with students majoring nursing and healthcare, where the researcher was a program director, professor, or facilitator. These programs were analyzed in terms of students’ needs assessment, program design, and implementation and evaluation factors. The concept and composition of global nursing competence, identified within previous studies, were deemed appropriate in all of our programs. Program composition varied from curricular to extracurricular domains. During the implementation phase, most of the programs included non-Korean students to improve cultural diversity and overcome language barriers. Qualitative and quantitative surveys were conducted to assess program efficacy. Data triangulation from students’ reflective journals was examined. Additionally, students’ awareness regarding changes within global health nursing, improved critical thinking, cultural understanding, and global leadership skills were investigated pre and post-program implementation. We discuss how identifying students’ needs regarding global nursing competence when developing appropriate curricula.

  11. Dental impression technique using optoelectronic devices

    Science.gov (United States)

    Sinescu, Cosmin; Barua, Souman; Topala, Florin Ionel; Negrutiu, Meda Lavinia; Duma, Virgil-Florin; Gabor, Alin Gabriel; Zaharia, Cristian; Bradu, Adrian; Podoleanu, Adrian G.

    2018-03-01

    INTRODUCTION: The use of Optical Coherence Tomography (OCT) as a non-invasive and high precision quantitative information providing tool has been well established by researches within the last decade. The marginal discrepancy values can be scrutinized in optical biopsy made in three dimensional (3D) micro millimetre scale and reveal detailed qualitative and quantitative information of soft and hard tissues. OCT-based high resolution 3D images can provide a significant impact on finding recurrent caries, restorative failure, analysing the precision of crown preparation, and prosthetic elements marginal adaptation error with the gingiva and dental hard tissues. During the CAD/CAM process of prosthodontic restorations, the circumvent of any error is important for the practitioner and the technician to reduce waste of time and material. Additionally, OCT images help to achieve a new or semi-skilled practitioner to analyse their crown preparation works and help to develop their skills faster than in a conventional way. The aim of this study is to highlight the advantages of OCT in high precision prosthodontic restorations. MATERIALS AND METHODS: 25 preparations of frontal and lateral teeth were performed for 7 different patients. The impressions of the prosthetic fields were obtained both using a conventional optoelectronic system (Apolo Di, Syrona) and a Spectral Domain using OCT (Dental prototype, working at 860 nm). For the conventional impression technique the preparation margins were been prelevated by gingival impregnated cords. No specific treatments were performed by the OCT impression technique. RESULTS: The scanning performed by conventional optoelectronic system proved to be quick and accurate in terms of impression technology. The results were represented by 3D virtual models obtained after the scanning procedure was completed. In order to obtain a good optical impression a gingival retraction cord was inserted between the prepared tooth and the gingival

  12. Effects of Lighting Direction on the Impression of Faces and Objects and the Role of Gaze Direction in the Impression-Forming

    Directory of Open Access Journals (Sweden)

    Keiichi Horibata

    2011-10-01

    Full Text Available We examined whether lighting direction, left or right, has an influence on the impression of faces and objects, and the role of gaze direction in the impression-forming. In the first experiment, we examined how lighting directions influenced the impression of faces and objects. On each trial, a pair of faces or objects was presented on top of each other. Left side was brighter in one and right side was brighter in the other. The participants were asked to answer which face or object was more preferable. The results showed that the participants preferred left-brighter faces and objects significantly more frequently than right-brighter stimuli (p < .05, chi-square test. The effect was especially strong in the upright faces. The results suggested that faces and objects give better impressions when they are lit from the left. In the second experiment, we examined whether eye-movement would play a role in our preference for left-brighter faces and objects. We recorded eye-movements of the participants while doing the same task as the first experiment. The results showed that the participants' preference for left-brighter faces were stronger when the participant started viewing from the left. The gaze direction may modulate our impression-formation (Shimojo et al. 2003.

  13. Global Oral Health Inequalities

    Science.gov (United States)

    Garcia, I.; Tabak, L.A.

    2011-01-01

    Despite impressive worldwide improvements in oral health, inequalities in oral health status among and within countries remain a daunting public health challenge. Oral health inequalities arise from a complex web of health determinants, including social, behavioral, economic, genetic, environmental, and health system factors. Eliminating these inequalities cannot be accomplished in isolation of oral health from overall health, or without recognizing that oral health is influenced at multiple individual, family, community, and health systems levels. For several reasons, this is an opportune time for global efforts targeted at reducing oral health inequalities. Global health is increasingly viewed not just as a humanitarian obligation, but also as a vehicle for health diplomacy and part of the broader mission to reduce poverty, build stronger economies, and strengthen global security. Despite the global economic recession, there are trends that portend well for support of global health efforts: increased globalization of research and development, growing investment from private philanthropy, an absolute growth of spending in research and innovation, and an enhanced interest in global health among young people. More systematic and far-reaching efforts will be required to address oral health inequalities through the engagement of oral health funders and sponsors of research, with partners from multiple public and private sectors. The oral health community must be “at the table” with other health disciplines and create opportunities for eliminating inequalities through collaborations that can harness both the intellectual and financial resources of multiple sectors and institutions. PMID:21490232

  14. Outcome dependency alters the neural substrates of impression formation

    Science.gov (United States)

    Ames, Daniel L.; Fiske, Susan T.

    2015-01-01

    How do people maintain consistent impressions of other people when other people are often inconsistent? The present research addresses this question by combining recent neuroscientific insights with ecologically meaningful behavioral methods. Participants formed impressions of real people whom they met in a personally involving situation. fMRI and supporting behavioral data revealed that outcome dependency (i.e., depending on another person for a desired outcome) alters previously identified neural dynamics of impression formation. Consistent with past research, a functional localizer identified a region of dorsomedial PFC previously linked to social impression formation. In the main task, this ROI revealed the predicted patterns of activity across outcome dependency conditions: greater BOLD response when information confirmed (vs. violated) social expectations if participants were outcome-independent and the reverse pattern if participants were outcome-dependent. We suggest that, although social perceivers often discount expectancy-disconfirming information as noise, being dependent on another person for a desired outcome focuses impression-formation processing on the most diagnostic information, rather than on the most tractable information. PMID:23850465

  15. An Evaluation of the Effect of Various Gloves on Polymerization Inhibition of Elastomeric Impression Materials: An In vitro Study.

    Science.gov (United States)

    Hiremath, Vinuta; Vinayakumar, G; Ragher, Mallikarjuna; Rayannavar, Sounyala; Bembalagi, Mahantesh; Ashwini, B L

    2017-11-01

    Latex protective barriers such as gloves and rubber dam material have been used widely in restorative procedures for crown and bridge. However, the chemical used during latex glove fabrication is thought to inhibit the polymerization of elastomeric impression materials used for impression making which has a detrimental effect on the dimensional accuracy and surface definition of resultant casts used for restorative procedures. The objectives of the study were to examine the surface of different elastomeric impressions on contact with various gloves. This clinical study included a total of eighty specimens of two types of the putty elastomeric impression material were hand manipulated by wearing three different gloves materials and is placed on a marked area of a clean and alcohol-treated glass slab at room temperature. The specimens examined for any signs of polymerization inhibition. The specimen will be rated as being "inhibited" if any residue remains on the glass slab and absence of the above will result as "no inhibition." The results showed no interference with the polymerization inhibition of the selected elastomers followed by the nitrile glove. The latex gloves showed inhibited set of the elastomeric impression material but set after sometime confirming time-dependent inhibition of the impression material. This study shows that the use of latex and sometime nitrile gloves during crown and bridge procedures should be contraindicated and the use of vinyl gloves should be stressed when working with elastomeric impression materials.

  16. Impression Management: The Web Presence of College Presidents

    Science.gov (United States)

    Morgan, Joanne Cardin

    2013-01-01

    Leadership profile pages on organizational websites have become staged opportunities for impression management. This research uses content analysis to examine the strategies of assertive impression management used to construct the leadership Web presence of the 70 presidents of national public universities, as identified in the "US News and…

  17. Comparison Of The Dimensional Stability Of Alginate Impressions ...

    African Journals Online (AJOL)

    Methodology: Alginate impressions of a master model of truncated metal cones were made and disinfected with 1% sodium hypochlorite constituted from 3.5% household bleach using the spray and immersion technique for 10;20 and 30 minutes. Impressions were cast in dental stone and the linear dimensional differences ...

  18. Effect of Polyvinyl Siloxane Viscosity on Accuracy of Dental Implant Impressions

    Directory of Open Access Journals (Sweden)

    Ahmad Ghahremanloo

    2017-02-01

    Full Text Available Objectives: The aim of this study was to compare the accuracy of dental implant impressions obtained by a combination of different impression techniques and viscosities of polyvinyl siloxane (PVS.Materials and Methods: Four parallel fixtures were placed between mental foramina in a master model of lower dental arch. Three different viscosities (putty/light body, medium body/light body, and monophase: heavy body and direct and indirect techniques (six groups were used, and seven impressions were obtained from each group (n=42. To measure the accuracy of impressions, drift, horizontal, and vertical angles of the implants, as well as the hex rotation of the implants in casts were evaluated using a digitizer device (1μm accuracy, in comparison with master arch. Data were analyzed using five-factor two-way ANOVA and Tukey’s post-hoc test.Results: The accuracy of impressions was assessed and the results showed that direct technique was not significantly different from indirect technique (P>0.05. Also, there were no significant differences between the mentioned viscosities except for the horizontal angle (P=0.006.Conclusions: Viscosity of impression materials is of high significance for the accuracy of dental impressions.Keywords: Dental Materials; Dental Implants; Dental Impression Technique; Viscosity; Vinyl Polysiloxane; Dimensional Measurement Accuracy

  19. Accuracy of a new ring-opening metathesis elastomeric dental impression material with spray and immersion disinfection.

    Science.gov (United States)

    Kronström, Mats H; Johnson, Glen H; Hompesch, Richard W

    2010-01-01

    A new elastomeric impression material has been formulated with a ring-opening metathesis chemistry. In addition to other properties of clinical significance, the impression accuracy must be confirmed. The purpose of this study was to compare the accuracy of the new elastomeric impression material with vinyl polysiloxane and polyether following both spray and immersion disinfection. Impressions of a modified dentoform with a stainless steel crown preparation in the lower right quadrant were made, and type IV gypsum working casts and dies were formed. Anteroposterior (AP), cross-arch (CA), buccolingual (BL), mesiodistal (MD), occlusogingivobuccal (OGB), and occlusogingivolingual (OGL) dimensions were measured using a microscope. Working cast and die dimensions were compared to those of the master model. The impression materials were a newly formulated, ring-opening metathesis-polymerization impression material (ROMP Cartridge Tray and ROMP Volume Wash), vinyl polysiloxane (VPS, Aquasil Ultra Monophase/LV), and a polyether (PE, Impregum Penta Soft/Permadyne Garant L). Fifteen impressions with each material were made, of which 5 were disinfected by spray for 10 minutes (CaviCide), 5 were disinfected by immersion for 90 minutes (ProCide D), and 5 were not disinfected. There were significant cross-product interactions with a 2-way ANOVA, so a 1-way ANOVA and Dunnett's T3 multiple comparison test were used to compare the dimensional changes of the 3 impression materials, by disinfection status and for each location (alpha=.05). For ROMP, there were no significant differences from the master, for any dimension, when comparing the control and 2 disinfectant conditions. No significant differences were detected among the 3 impression materials for CA, BL, and MD. The working die dimensions of OGB and OGL for VPS with immersion disinfection were significantly shorter than with PE and ROMP (P<.05). Overall, the AP dimension was more accurate than CA, and the BL of working dies

  20. Impressions of functional food consumers.

    Science.gov (United States)

    Saher, Marieke; Arvola, Anne; Lindeman, Marjaana; Lähteenmäki, Liisa

    2004-02-01

    Functional foods provide a new way of expressing healthiness in food choices. The objective of this study was to apply an indirect measure to explore what kind of impressions people form of users of functional foods. Respondents (n=350) received one of eight versions of a shopping list and rated the buyer of the foods on 66 bipolar attributes on 7-point scales. The shopping lists had either healthy or neutral background items, conventional or functional target items and the buyer was described either as a 40-year-old woman or man. The attribute ratings revealed three factors: disciplined, innovative and gentle. Buyers with healthy background items were perceived as more disciplined than those having neutral items on the list, users of functional foods were rated as more disciplined than users of conventional target items only when the background list consisted of neutral items. Buyers of functional foods were regarded as more innovative and less gentle, but gender affected the ratings on gentle dimension. The impressions of functional food users clearly differ from those formed of users of conventional foods with a healthy image. The shopping list method performed well as an indirect method, but further studies are required to test its feasibility in measuring other food-related impressions.

  1. Effects of disinfecting alginate impressions on the scratch hardness of stone models.

    Science.gov (United States)

    Hiraguchi, Hisako; Nakagawa, Hisami; Wakashima, Mitsuru; Miyanaga, Kohichi; Saigo, Masataka; Nishiyama, Minoru

    2006-03-01

    This study investigated the effects of disinfecting alginate impressions on the scratch depth of resultant stone models. Eleven brands of alginate impression material and two disinfectants, 1% sodium hypochlorite and 2% glutaraldehyde, were used. Impressions were immersed in disinfectant solutions or stored in sealed bags after spraying with disinfectants, and then poured with a type V dental stone. The scratch depth of the stone model obtained from disinfected impression was measured. The storage of alginate impressions after spraying with disinfectants did not increase the scratch depth of resultant stone models. However, the effect of immersion in disinfectants on scratch depth varied with the brand of the alginate impression material.

  2. A multicenter, open-label trial to evaluate the quality of life in adults with ADHD treated with long-acting methylphenidate (OROS MPH): Concerta Quality of Life (CONQoL) study.

    Science.gov (United States)

    Mattos, Paulo; Louzã, Mário Rodrigues; Palmini, André Luís Fernandes; de Oliveira, Irismar Reis; Rocha, Fábio Lopes

    2013-07-01

    The available literature provides few studies on the effectiveness of methylphenidate in improving quality of life in individuals with ADHD. To assess the effectiveness of methylphenidate OROS formulation (OROS MPH) through QoL in adults with ADHD. A 12-week, multicenter, open-label trial involving 60 patients was used. The measures used were Adult Self-Rating Scale, Adult ADHD Quality of Life Scale (AAQoL), State and Trait Anxiety Inventory (STAI), Hamilton Depression Rating Scale (HAM-D), Clinical Global Impression (CGI), and safety measures. A significance statistic level of 5% was adopted. Analyses included 60 patients (66.7% male; M age = 31.1 years) for safety and 58 patients for effectiveness. All AAQoL subscales improved from baseline to Week 12 (p < .0001), as well as the Total AAQoL (p < .0001). A significant reduction on Clinical Global Impression-Improvement (CGI-I), HAM-D, STAI, and ASRS scores was observed (p < .0001). No serious adverse event was reported. Treatment of adult ADHD patients with OROS MPH improves QoL.

  3. Accuracy of single-tooth restorations based on intraoral digital and conventional impressions in patients.

    Science.gov (United States)

    Boeddinghaus, Moritz; Breloer, Eva Sabina; Rehmann, Peter; Wöstmann, Bernd

    2015-11-01

    The purpose of this clinical study was to compare the marginal fit of dental crowns based on three different intraoral digital and one conventional impression methods. Forty-nine teeth of altogether 24 patients were prepared to be treated with full-coverage restorations. Digital impressions were made using three intraoral scanners: Sirona CEREC AC Omnicam (OCam), Heraeus Cara TRIOS and 3M Lava True Definition (TDef). Furthermore, a gypsum model based on a conventional impression (EXA'lence, GC, Tokyo, Japan) was scanned with a standard laboratory scanner (3Shape D700). Based on the dataset obtained, four zirconia copings per tooth were produced. The marginal fit of the copings in the patient's mouth was assessed employing a replica technique. Overall, seven measurement copings did not fit and, therefore, could not be assessed. The marginal gap was 88 μm (68-136 μm) [median/interquartile range] for the TDef, 112 μm (94-149 μm) for the Cara TRIOS, 113 μm (81-157 μm) for the laboratory scanner and 149 μm (114-218 μm) for the OCam. There was a statistically significant difference between the OCam and the other groups (p < 0.05). Within the limitations of this study, it can be concluded that zirconia copings based on intraoral scans and a laboratory scans of a conventional model are comparable to one another with regard to their marginal fit. Regarding the results of this study, the digital intraoral impression can be considered as an alternative to a conventional impression with a consecutive digital workflow when the finish line is clearly visible and it is possible to keep it dry.

  4. Clinical Characteristics and Predictors of Outcome of Schizophrenia-Spectrum Psychosis in Children and Adolescents

    DEFF Research Database (Denmark)

    Stentebjerg-Olesen, Marie; Pagsberg, Anne K.; Fink-Jensen, Anders

    2016-01-01

    .5%]), thought disorder (65.5%), bizarre/disorganized behavior (52.8%), and flat or blunted affect/negative symptoms (52.3%/50.4%). Mean baseline Positive and Negative Syndrome Scale (PANSS)-total, positive, and negative symptom scores were 84.5 ± 10.9, 19.3 ± 4.4 and 20.8 ± 2.9. Mean baseline Clinical Global...... Impressions-Severity and Children's Global Assessment Scale/Global Assessment of Functioning (CGAS/GAF) scores were 5.0 ± 0.7 and 35.5 ± 9.1. Comorbidity was frequent, particularly posttraumatic stress disorder (34.3%), attention-deficit/hyperactivity and/or disruptive behavior disorders (33...

  5. An impressive start

    CERN Multimedia

    2011-01-01

    This has been an excellent week for the LHC, with a succession of fills rapidly increasing the number of proton bunches to 194 per beam. This has allowed the experiments to reach a peak luminosity of 2.5 × 1032 cm-2s-1, thereby surpassing the record for 2010 where we reached 2.0 × 1032 cm-2s-1. At the time of writing, the integrated luminosity delivered by the LHC in 2011 is around 28 inverse picobarns, which is already more than half of the total 2010 dataset.   These are impressive numbers, but what impresses me most is how quickly the LHC operators are now able to turn the machine around between fills, and how well LHC running has been incorporated into the overall operation of CERN’s accelerator complex. The flexibility of the LHC was illustrated on Thursday when we started a short phase of running at 1.38 TeV per beam, equivalent to the energy-per-nucleon of a lead-ion run. This lower energy data will be used by the experiments, in particular by ALICE, to compare...

  6. Improvement in cerebral function with treatment of posttraumatic stress disorder.

    Science.gov (United States)

    Roy, Michael J; Francis, Jennifer; Friedlander, Joshua; Banks-Williams, Lisa; Lande, Raymond G; Taylor, Patricia; Blair, James; McLellan, Jennifer; Law, Wendy; Tarpley, Vanita; Patt, Ivy; Yu, Henry; Mallinger, Alan; Difede, Joann; Rizzo, Albert; Rothbaum, Barbara

    2010-10-01

    Posttraumatic stress disorder (PTSD) and mild traumatic brain injury (mTBI) are signature illnesses of the Iraq and Afghanistan wars, but current diagnostic and therapeutic measures for these conditions are suboptimal. In our study, functional magnetic resonance imaging (fMRI) is used to try to differentiate military service members with: PTSD and mTBI, PTSD alone, mTBI alone, and neither PTSD nor mTBI. Those with PTSD are then randomized to virtual reality exposure therapy or imaginal exposure. fMRI is repeated after treatment and along with the Clinician-Administered PTSD Scale (CAPS) and Clinical Global Impression (CGI) scores to compare with baseline. Twenty subjects have completed baseline fMRI scans, including four controls and one mTBI only; of 15 treated for PTSD, eight completed posttreatment scans. Most subjects have been male (93%) and Caucasian (83%), with a mean age of 34. Significant improvements are evident on fMRI scans, and corroborated by CGI scores, but CAPS scores improvements are modest. In conclusion, CGI scores and fMRI scans indicate significant improvement in PTSD in both treatment arms, though CAPS score improvements are less robust. © 2010 Association for Research in Nervous and Mental Disease.

  7. Intraoral digital impressions to enhance implant esthetics.

    Science.gov (United States)

    Hinds, Kenneth F

    2014-09-01

    Providing an accurate soft-tissue transfer for anterior implants is not a new concept; however, it is currently an especially relevant one. There are numerous documented cases in which residual excess cement with cement-retained implant restorations was a contributing cause in periimplantitis. In 2012, Wadhwani et al reported the importance of placing the crown abutment margins supragingivally for ease of cement removal as a possible solution to address this important issue. Therefore, if placement of the crown abutment margin location is imperative, making an impression that reproduces the soft tissue is equally critical. In 1997, this author introduced the "custom impression coping" to achieve such an accurate transfer. Given the wide use of intraoral digital impressions in 2014, this discussion describes how to fabricate a "custom scan body" using that technology to replicate the transition zone in the virtual environment.

  8. Auditory and visual spatial impression: Recent studies of three auditoria

    Science.gov (United States)

    Nguyen, Andy; Cabrera, Densil

    2004-10-01

    Auditory spatial impression is widely studied for its contribution to auditorium acoustical quality. By contrast, visual spatial impression in auditoria has received relatively little attention in formal studies. This paper reports results from a series of experiments investigating the auditory and visual spatial impression of concert auditoria. For auditory stimuli, a fragment of an anechoic recording of orchestral music was convolved with calibrated binaural impulse responses, which had been made with the dummy head microphone at a wide range of positions in three auditoria and the sound source on the stage. For visual stimuli, greyscale photographs were used, taken at the same positions in the three auditoria, with a visual target on the stage. Subjective experiments were conducted with auditory stimuli alone, visual stimuli alone, and visual and auditory stimuli combined. In these experiments, subjects rated apparent source width, listener envelopment, intimacy and source distance (auditory stimuli), and spaciousness, envelopment, stage dominance, intimacy and target distance (visual stimuli). Results show target distance to be of primary importance in auditory and visual spatial impression-thereby providing a basis for covariance between some attributes of auditory and visual spatial impression. Nevertheless, some attributes of spatial impression diverge between the senses.

  9. Digitization of dental alginate impression: Three-dimensional evaluation of point cloud.

    Science.gov (United States)

    Kim, So-Ri; Lee, Wan-Sun; Kim, Woong-Chul; Kim, Hea-Young; Kim, Ji-Hwan

    2015-01-01

    The purpose of this study was to evaluate the digitization of alginate impressions by analyzing differences between the scan data of two types of impressions (alginate and rubber) taken from the master die and the scan data for the master die. The master die and impressions were digitized using a dental laser scanner (7 series, Dental Wings, Montreal, Canada). The crown portion of the abutment teeth in the digital data of 20 impressions was divided into three regions: cervical surface, middle surface, and occlusal surface. An independent t-test showed a significant difference (palginate and rubber). One-way ANOVA and Tukey's honest significant difference test revealed a significant difference (palginate impressions in the future.

  10. An in vitro study to compare the accuracy of the master cast fabricated by four different transfer impression techniques for single-tooth implant replacement.

    Science.gov (United States)

    Lahori, Manesh; Nagrath, Rahul; Agrawal, Prateek

    2014-03-01

    Single tooth implant retained crowns have become a recognized technique for the replacement of the missing teeth. With the predictable integration of implants, the emphasis is shifted towards precise prosthesis. Minor movement of the impression coping retained inside the impression material can occur during all the procedures, leading to the three-dimensional spatial inaccuracies in the master casts. Therefore, the present study was undertaken with the purpose to evaluate the accuracy of single-tooth implant impression techniques using four different impression copings, so as to obtain a precise definitive cast for a single-unit implant restoration. A maxillary acrylic resin model with a standard single implant in the first molar region was used to simulate a clinical situation. A total of 60 impressions were made with polyvinylsiloxane impression material, which were divided into four groups of 15 impressions each. Group I used non-modified square impression coping, while in group II, III and IV square impression coping were modified differently. Master casts fabricated for all the groups were analyzed to detect rotational position change of the hexagon on the implant replicas in the master casts in reference to the resin model. The master casts obtained with the roughened and adhesive-coated impression copings showed a lower amount of rotational movement than the masters casts achieved with the non-modified impression copings. Hence, the clinician should use sandblasted and adhesive coated impression copings to achieve a more accurate and precise orientation of the implant replicas in the laboratory master casts in single-tooth implant restorations.

  11. A Framework on Impression Management in Negotiation

    DEFF Research Database (Denmark)

    Mathiasen, Ditte Dahl; Esbjerg, Lars

    2014-01-01

    In this paper we develop a dramaturgical framework to provide us with a new understanding of how negotiators use impression management behaviour during the negotiation process to position themselves in an endeavour to reach a desirable outcome.......In this paper we develop a dramaturgical framework to provide us with a new understanding of how negotiators use impression management behaviour during the negotiation process to position themselves in an endeavour to reach a desirable outcome....

  12. Optical 3D scans for orthodontic diagnostics performed on full-arch impressions. Completeness of surface structure representation.

    Science.gov (United States)

    Vogel, Annike B; Kilic, Fatih; Schmidt, Falko; Rübel, Sebastian; Lapatki, Bernd G

    2015-11-01

    The purpose of this work was to evaluate the completeness of surface structure representation offered by full-arch impression scans in different situations of tooth (mal)alignment and whether this completeness could be improved by performing rescans on the same impressions reduced sequentially to different levels of gingival height and by adding extra single scans to the number of single scans recommended by the manufacturer. Three pairs of full-arch resin models were used as reference, characterized either by normal occlusion, by anterior diastematic protrusion (and edentulous spaces in the lower posterior segments), or by anterior crowding. An alginate impression of each arch was taken and digitized with a structured-light scanner, followed by three rescans with the impression cut back to 10, 5, and 1 mm of gingival height. Both the initial scan and the rescans were performed both with 19 basic single scans and with 10 extra single scans. Each impression scan was analyzed for quantitative completeness relative to its homologous direct scan of the original resin model. In addition, the topography of voids in the resultant digital model was assessed by visual inspection. Compared to the homologous reference scans of the original resin models, completeness of the original impression scans--in the absence of both gingival cutback and extra single scans--was 97.23 ± 0.066% in the maxilla or 95.72 ± 0.070% in the mandible with normal occlusion, 91.11 ± 0.132% or 96.07 ± 0.109% in the arches with anterior diastematic protrusion, and 98.24 ± 0.085% or 93.39 ± 0.146% in those with anterior crowding. Gingival cutback and extra single scans were found to improve these values up to 100.35 ± 0.066% or 99.53 ± 0.070% in the arches with normal occlusion, 91.77 ± 0.132% or 97.95 ± 0.109% in those with anterior diastematic protrusion, and 98.59 ± 0.085% or 98.96 ± 0.146% in those with anterior crowding. In strictly quantitative terms, the impression scans did capture

  13. Use of a Reflective Ultraviolet Imaging System (RUVIS) on Two-Dimensional Dust Impressions Created with Footwear on Multiple Substrates

    Science.gov (United States)

    Engelson, Brian Aaron

    paper, steel sheet metal, vinyl flooring, wood flooring, and carpet. Heel impressions were applied to the various substrates utilizing vacuum collected dust and normal walking pressure. Each substrate was then explored and photographed in ambient fluorescent light, oblique white light at 0°, 15°, 30°, and 0° with the light source below the surface plane of the substrate, and 254 nm UV light at 0°, 15°, 30°, 45°, 60°, 75°, 90° and 0° with the light source below the surface plane of the substrate. All pictures were evaluated for clarity and visible detail of the footwear impression and the amount of background interference present, selecting for the best images within a lighting condition group. Additional intra- and intergroup comparisons were carried out to explore differences created by the various lighting conditions. Enhanced images were then created with the best scored pictures and evaluated for additional modifications in impression visibility and background interference. Photographs of footwear impressions in dust illuminated with ambient fluorescent light proved to be the most difficult conditions under which a footwear impression could be visualized. However, both oblique white light and 254 nm UV light lighting conditions showed improvements in either visualization or background dropout, or both, over ambient light conditions. An assessment of the white light and 254 nm UV light RUVIS images also demonstrated that the best angles for the light source for all substrates were oblique 0 and oblique 0° below the surface plane of the substrate lighting. It was found that white light photographs generally provided higher visibility ratings, while RUVIS 254 nm UV light photographs provided better grades for reducing background interference. Enhanced images of white light conditions provided generally poorer quality and quantity of details, while enhanced RUVIS images seemed to improve upon these areas. The use of a RUVIS to capture photographs of

  14. Effect of Polyvinyl Siloxane Viscosity on Accuracy of Dental Implant Impressions.

    Science.gov (United States)

    Ghahremanloo, Ahmad; Seifi, Mahdieh; Ghanbarzade, Jalil; Abrisham, Seyyed Mohammad; Javan, Rashid Abdolah

    2017-01-01

    The aim of this study was to compare the accuracy of dental implant impressions obtained by a combination of different impression techniques and viscosities of polyvinyl siloxane (PVS). Four parallel fixtures were placed between mental foramina in a master model of lower dental arch. Three different viscosities (putty/light body, medium body/light body, and monophase: heavy body) and direct and indirect techniques (six groups) were used, and seven impressions were obtained from each group (n=42). To measure the accuracy of impressions, drift, horizontal, and vertical angles of the implants, as well as the hex rotation of the implants in casts were evaluated using a digitizer device (1μm accuracy), in comparison with master arch. Data were analyzed using five-factor two-way ANOVA and Tukey's post-hoc test. The accuracy of impressions was assessed and the results showed that direct technique was not significantly different from indirect technique (P>0.05). Also, there were no significant differences between the mentioned viscosities except for the horizontal angle (P=0.006). Viscosity of impression materials is of high significance for the accuracy of dental impressions.

  15. Clinical evaluation of efonidipine hydrochloride in angina pectoris. Evaluation in exercise 201Tl myocardial scintigraphy

    International Nuclear Information System (INIS)

    Hori, Masatsugu; Nishimura, Tsunehiko

    1996-01-01

    Clinical usefulness of once-daily administration of 20 to 60 mg of efonidipine hydrochloride and coronary hemodynamics during exercise 201 Tl myocardial scintigraphy were investigated in patients with angina pectoris. Out of 11 patients enrolled in this study, 9 patients were included in the evaluation of patients' impression, in improvement rating in subjective symptoms, in the analysis of the exercise test, in the improvement rating of images on 201 Tl myocardial scintigraphy, and in the global improvement rating, while 10 patients were included in the overall safety rating. Four patients in improvement rating in subjective symptoms, 2 in improving rating in the exercise test, and 5 in the global improvement rating were rated 'improved' or better. In the improvement rating on the exercise 201 Tl myocardial scintigraphy image, reduction of the image was observed in 5 patients, 3 out of which were evaluated as 'improved' or better. A distinctive reduction of ischemic regions was observed in 2 patients out of the 3. A significant decrease in the number of angina pectoris events and a decreasing tendency in consumption of fast-acting nitrates were observed in spite of the low number of the patients studied. An adverse effect was observed in 1 patient and abnormal laboratory values were observed in 2 patients which were improved promptly after withdrawal of the drug. It was in 7 patients evaluated as 'no problem', while in 4 patients it was evaluated as 'useful' or more. (author)

  16. Adjunctive sarcosine plus benzoate improved cognitive function in chronic schizophrenia patients with constant clinical symptoms: A randomised, double-blind, placebo-controlled trial.

    Science.gov (United States)

    Lin, Chun-Yuan; Liang, Sun-Yuan; Chang, Yue-Cune; Ting, Shuo-Yen; Kao, Ching-Ling; Wu, Yu-Hsin; Tsai, Guochuan E; Lane, Hsien-Yuan

    2017-08-01

    Objectives Hypofunction of NMDA receptor is implicated in the pathophysiology, particularly cognitive impairment, of schizophrenia. Sarcosine, a glycine transporter I (GlyT-1) inhibitor, and sodium benzoate, a d-amino acid oxidase (DAAO) inhibitor, can both enhance NMDA receptor-mediated neurotransmission. We proposed simultaneously inhibiting DAAO and GlyT-1 may be more effective than inhibition of either in improving the cognitive and global functioning of schizophrenia patients. Methods This study compared add-on sarcosine (2 g/day) plus benzoate (1 g/day) vs. sarcosine (2 g/day) for the clinical symptoms, as well as the cognitive and global functioning, of chronic schizophrenia patients in a 12-week, double-blind, randomised, placebo-controlled trial. Participants were measured with the Positive and Negative Syndrome Scale and the Global Assessment of Functioning Scale every 3 weeks. Seven cognitive domains, recommended by the Measurement and Treatment Research to Improve Cognition in Schizophrenia Committee, were measured at weeks 0 and 12. Results Adjunctive sarcosine plus benzoate, but not sarcosine alone, improved the cognitive and global functioning of patients with schizophrenia, even when their clinical symptoms had not improved. Conclusions This finding suggests N-methyl-d-aspartate receptor-enhancement therapy can improve the cognitive function of patients with schizophrenia, further indicating this pro-cognitive effect can be primary without improvement in clinical symptoms.

  17. The Importance of Subtextual Impression Management and Business Faculty.

    Science.gov (United States)

    Chaney, Lillian H.; Lyden, Julie A.

    1998-01-01

    College students (n=265) reported their impressions of business faculty's personal appearance, body language, behavior, and office appearance. Findings indicate that impression management is useful for professors who want to convey credibility, authority, and interest in students. (JOW)

  18. Production of a calcium silicate cement material from alginate impression material.

    Science.gov (United States)

    Washizawa, Norimasa; Narusawa, Hideaki; Tamaki, Yukimichi; Miyazaki, Takashi

    2012-01-01

    The purpose of this study was to synthesize biomaterials from daily dental waste. Since alginate impression material contains silica and calcium salts, we aimed to synthesize calcium silicate cement from alginate impression material. Gypsum-based investment material was also investigated as control. X-ray diffraction analyses revealed that although firing the set gypsum-based and modified investment materials at 1,200°C produced calcium silicates, firing the set alginate impression material did not. However, we succeeded when firing the set blend of pre-fired set alginate impression material and gypsum at 1,200°C. SEM observations of the powder revealed that the featured porous structures of diatomite as an alginate impression material component appeared useful for synthesizing calcium silicates. Experimentally fabricated calcium silicate powder was successfully mixed with phosphoric acid solution and set by depositing the brushite. Therefore, we conclude that the production of calcium silicate cement material is possible from waste alginate impression material.

  19. Dimensional Changes of Alginate Dental Impression Materials-An Invitro Study.

    Science.gov (United States)

    Kulkarni, Manisha M; Thombare, Ram U

    2015-08-01

    Dentists are always looking ahead for more dimensionally stable material for accurate and successful fabrication of prosthesis in this competitive world. Arrival of newer materials and increased material market puts dentists in dilemma for selection of material. The study evaluated the effect of variations in time of pour and temperature on dimensional stability of three brands of commercially available alginates. Velplast, Marieflex & Zelgan alginate impression materials were evaluated by measuring dimensional accuracy of the master cast. A die was prepared and mounted on the apparatus for the ease of impression making. The prepared casts were categorized into five groups and made up of three brands of alginate impression material with variation in time of pour viz: immediate, 20&40 minutes interval and with varying temperature of 25(0)C, 30(0)C & 40(0)C. Impressions showed least distortion at varying degrees of temperature for 20 minutes, but the values obtained by storing of alginate impressions for 20 minutes at 30(0)C were found to be nearly accurate than the values obtained by storing of impression at 40(0)C. However, storing showed shrinkage of impressions. Marieflex showed better accuracy in comparison with other two materials. Maintenance of temperature and humidity play key role during storage & transport to prevent distortion. But the study suggests immediate pouring which will minimize the distortion. The manipulation instructions, temperature of mixing water, environment & water powder ratio also plays key role in minimizing the distortion.

  20. Impression Management and the Control of Social Anxieties.

    Science.gov (United States)

    Miller, Rowland S.

    Impression management refers to the concept that people engaged in interaction will attempt to control the image of themselves that others form. This provides a foundation for social interaction, giving others information about who we are and what to expect from us. A central concern of impression management is the manner in which we are evaluated…

  1. Performance of fast-setting impression materials in the reproduction of subgingival tooth surfaces without soft tissue retraction.

    Science.gov (United States)

    Rudolph, Heike; Röhl, Andreas; Walter, Michael H; Luthardt, Ralph G; Quaas, Sebastian

    2014-01-01

    Fast-setting impression materials may be prone to inaccuracies due to accidental divergence from the recommended mixing protocol. This prospective randomized clinical trial aimed to assess three-dimensional (3D) deviations in the reproduction of subgingival tooth surfaces and to determine the effect of either following or purposely diverging from the recommended mixing procedure for a fast-setting addition-curing silicone (AS) and fast-setting polyether (PE). After three impressions each were taken from 96 participants, sawcut gypsum casts were fabricated with a standardized procedure and then optically digitized. Data were assessed with a computer-aided 3D analysis. For AS impressions, multivariate analysis of variance revealed a significant influence of the individual tooth and the degree to which the recommended mixing protocol was violated. For PE impressions, the ambient air temperature and individual tooth showed significant effects, while divergence from the recommended mixing protocol was not of significance. The fast-setting PE material was not affected by changes in the recommended mixing protocol. For the two fast-setting materials examined, no divergences from the recommended mixing protocol of less than 2 minutes led to failures in the reproduction of the subgingival tooth surfaces.

  2. A Paradigm shift in the concept for making dental impressions.

    Science.gov (United States)

    Nayar, Sanjna; Mahadevan, R

    2015-04-01

    Digital dental impression is a revolutionary technological advancement that so surpasses the accuracy and efficiency of former techniques for obtaining replicas of prepared teeth for the purpose of fabricating restorations that its adoption by dentists is rapidly eclipsing the use of elastomeric impression materials. The ultimate goals of dentists dedicated to quality restorative dentistry are to make their treatment of patients as accurate, stressless, and efficient as possible. By elimination of the everyday problems described above, there is no question that the significant advantages of digital impressions will make intraoral digital scanning standard procedure in most dental offices within the next several years. Furthermore, digital impressions have proven to reduce remakes and returns, as well as increase overall efficiency. The patient also benefits by being provided a far more positive experience. Finally, through the use of digital impression making, it has been determined that laboratory products become more consistent and require less chair time at insertion.

  3. A Paradigm shift in the concept for making dental impressions

    Directory of Open Access Journals (Sweden)

    Sanjna Nayar

    2015-01-01

    Full Text Available Digital dental impression is a revolutionary technological advancement that so surpasses the accuracy and efficiency of former techniques for obtaining replicas of prepared teeth for the purpose of fabricating restorations that its adoption by dentists is rapidly eclipsing the use of elastomeric impression materials. The ultimate goals of dentists dedicated to quality restorative dentistry are to make their treatment of patients as accurate, stressless, and efficient as possible. By elimination of the everyday problems described above, there is no question that the significant advantages of digital impressions will make intraoral digital scanning standard procedure in most dental offices within the next several years. Furthermore, digital impressions have proven to reduce remakes and returns, as well as increase overall efficiency. The patient also benefits by being provided a far more positive experience. Finally, through the use of digital impression making, it has been determined that laboratory products become more consistent and require less chair time at insertion.

  4. An evaluation of the effect of various gloves on polymerization inhibition of elastomeric impression materials: An In vitro study

    Directory of Open Access Journals (Sweden)

    Vinuta Hiremath

    2017-01-01

    Full Text Available Background: Latex protective barriers such as gloves and rubber dam material have been used widely in restorative procedures for crown and bridge. However, the chemical used during latex glove fabrication is thought to inhibit the polymerization of elastomeric impression materials used for impression making which has a detrimental effect on the dimensional accuracy and surface definition of resultant casts used for restorative procedures. The objectives of the study were to examine the surface of different elastomeric impressions on contact with various gloves. Materials and Methods: This clinical study included a total of eighty specimens of two types of the putty elastomeric impression material were hand manipulated by wearing three different gloves materials and is placed on a marked area of a clean and alcohol-treated glass slab at room temperature. The specimens examined for any signs of polymerization inhibition. The specimen will be rated as being “inhibited” if any residue remains on the glass slab and absence of the above will result as “no inhibition.” Results: The results showed no interference with the polymerization inhibition of the selected elastomers followed by the nitrile glove. The latex gloves showed inhibited set of the elastomeric impression material but set after sometime confirming time-dependent inhibition of the impression material. Conclusion: This study shows that the use of latex and sometime nitrile gloves during crown and bridge procedures should be contraindicated and the use of vinyl gloves should be stressed when working with elastomeric impression materials.

  5. Risk Based Monitoring (RBM: A global study focusing on perception and merits among clinical investigational sites

    Directory of Open Access Journals (Sweden)

    Prajna P. Kumar

    2016-12-01

    Conclusion: This unique study performed across ten emerging and developed countries strongly supported the need for systematic global training, education, and implementation of RBM regulatory guidance, with an aim for better safety of subjects and improved quality of clinical trial data. Furthermore, studies with larger sample sizes are recommended to provide an evidence-based approach.

  6. Work plan for testing silicone impression material and fixture on pool cell capsule

    International Nuclear Information System (INIS)

    Lundeen, J.E.

    1994-01-01

    The purpose of this work plan is to provide a safe procedure to test a cesium capsule impression fixture at Waste Encapsulation and Storage Facility (WESF). The impression will be taken with silicone dental impression material pressed down upon the capsule using the impression fixture. This test will evaluate the performance of the fixture and impression material under high radiation and temperature conditions on a capsule in a WESF pool cell

  7. Extrusion-mixing compared with hand-mixing of polyether impression materials?

    Science.gov (United States)

    McMahon, Caroline; Kinsella, Daniel; Fleming, Garry J P

    2010-12-01

    The hypotheses tested were two-fold (a) whether altering the base:catalyst ratio influences working time, elastic recovery and strain in compression properties of a hand-mixed polyether impression material and (b) whether an extrusion-mixed polyether impression material would have a significant advantage over a hand-mixed polyether impression material mixed to the optimum base:catalyst ratio. The polyether was hand-mixed at the optimum (manufacturers recommended) base:catalyst ratios (7:1) and further groups were made by increasing or decreasing the catalyst length by 25%. Additionally specimens were also made from an extrusion-mixed polyether impression material and compared with the optimum hand-mixed base:catalyst ratio. A penetrometer assembly was used to measure the working time (n=5). Five cylindrical specimens for each hand-mixed and extrusion mixed group investigated were employed for elastic recovery and strain in compression testing. Hand-mixing polyether impression materials with 25% more catalyst than that recommended significantly decreased the working time while hand-mixing with 25% less catalyst than that recommended significantly increased the strain in compression. The extrusion-mixed polyether impression material provided similar working time, elastic recovery and strain in compression to the hand-mixed polyether mixed at the optimum base:catalyst ratio.

  8. The public impression of radiation as a product of science communication

    International Nuclear Information System (INIS)

    Kim, Hak Soo; Ha, Hyo Suk; Oh, Mi Young; Choi, Jin Myeung

    2008-01-01

    The purpose of this study is to observe how the public impression of radiation is changing over the North Korea’s nuclear bomb test. We found that the nuclear bomb test brought more negative impressions of radiation, but, in one year, more positive ones prevailed as in the pre-bomb-test. Those positive impressions were found to be composed of useful and positive elements mostly relative to health care. This suggests that we need to apply radiation (fusion) technology to solving everyday life problems in order to bring more positive impressions of radiation

  9. Assessing Impression Management With the MMPI-2 in Child Custody Litigation.

    Science.gov (United States)

    Arce, Ramón; Fariña, Francisca; Seijo, Dolores; Novo, Mercedes

    2015-12-01

    Forensic psychological evaluation of parents in child custody litigation is primarily focused on evaluating parenting capacity and underreporting. The biased responses of underreporting have been classified as Impression Management (IM) or as Self-Deceptive Positivity (S-DP), which are regarded to be conscious or unconscious in nature, respectively. A field study was undertaken to assess impression management on the Minnesota Multiphasic Personality Inventory-2 (MMPI-2) in child custody cases, the accuracy of the MMPI-2 scales in classifying IM, and what parents in child custody litigation actually manipulate in terms of IM. A total of 244 parents in child custody litigation and 244 parents under standard instructions were administered the MMPI-2. The results revealed that the L, Mp, Wsd, and Od scales discriminated between both samples of parents; the rate of satisfactory classification (i.e., odds ratio ranged from 5.7 for Wsd to 23.3 for Od) and an incremental validity of Od over Mp and Wsd. As for the effects of IM, the results show IM effects in the Basic Clinical Scales, the Restructured Clinical Scales, the Personality Psychopathology Five Scales, the Content Scales, and the Supplementary Scales. The implications of the results are discussed in relation to the forensic evaluation of parents in child custody litigation. © The Author(s) 2014.

  10. Quality improvement in clinical documentation: does clinical governance work?

    Directory of Open Access Journals (Sweden)

    Dehghan M

    2013-12-01

    Full Text Available Mahlegha Dehghan,1 Dorsa Dehghan,2 Akbar Sheikhrabori,3 Masoume Sadeghi,4 Mehrdad Jalalian5 1Department of Medical Surgical Nursing, School of Nursing and Midwifery, Kerman University of Medical Sciences, Kerman, 2Department of Pediatric Nursing, School of Nursing and Midwifery, Islamic Azad University Kerman Branch, Kerman, 3Department of Medical Surgical Nursing, School of Nursing and Midwifery, Kerman University of Medical Sciences, Kerman, 4Research Center for Modeling in Health, Institute of Futures Studies in Health, Kerman University of Medical Sciences, Kerman, 5Electronic Physician Journal, Mashhad, Iran Introduction: The quality of nursing documentation is still a challenge in the nursing profession and, thus, in the health care industry. One major quality improvement program is clinical governance, whose mission is to continuously improve the quality of patient care and overcome service quality problems. The aim of this study was to identify whether clinical governance improves the quality of nursing documentation. Methods: A quasi-experimental method was used to show nursing documentation quality improvement after a 2-year clinical governance implementation. Two hundred twenty random nursing documents were assessed structurally and by content using a valid and reliable researcher made checklist. Results: There were no differences between a nurse's demographic data before and after 2 years (P>0.05 and the nursing documentation score did not improve after a 2-year clinical governance program. Conclusion: Although some efforts were made to improve nursing documentation through clinical governance, these were not sufficient and more attempts are needed. Keywords: nursing documentation, clinical governance, quality improvement, nursing record

  11. Digital impression-taking: Fundamentals and benefits in orthodontics.

    Science.gov (United States)

    Lecocq, Guillaume

    2016-06-01

    The digital era has burst into our offices in a big way. 3D camera technology has improved, enabling us to record our impressions and the occlusion in a digital format file. This file can then be used to make set-ups and manufacture orthodontic devices. Like any new technology, it needs to be studied and understood in order to grasp it fully and master the information and digital flow which can be generated between one's office and any external party involved in treatment, such as laboratories or other colleagues. Copyright © 2016 CEO. Published by Elsevier Masson SAS. All rights reserved.

  12. Three-dimensional accuracy of different impression techniques for dental implants

    Directory of Open Access Journals (Sweden)

    Mohammadreza Nakhaei

    2015-01-01

    Full Text Available Background: Accurate impression making is an essential prerequisite for achieving a passive fit between the implant and the superstructure. The aim of this in vitro study was to compare the three-dimensional accuracy of open-tray and three closed-tray impression techniques. Materials and Methods: Three acrylic resin mandibular master models with four parallel implants were used: Biohorizons (BIO, Straumann tissue-level (STL, and Straumann bone-level (SBL. Forty-two putty/wash polyvinyl siloxane impressions of the models were made using open-tray and closed-tray techniques. Closed-tray impressions were made using snap-on (STL model, transfer coping (TC (BIO model and TC plus plastic cap (TC-Cap (SBL model. The impressions were poured with type IV stone, and the positional accuracy of the implant analog heads in each dimension (x, y and z axes, and the linear displacement (ΔR were evaluated using a coordinate measuring machine. Data were analyzed using ANOVA and post-hoc Tukey tests (α = 0.05. Results: The ΔR values of the snap-on technique were significantly lower than those of TC and TC-Cap techniques (P < 0.001. No significant differences were found between closed and open impression techniques for STL in Δx, Δy, Δz and ΔR values (P = 0.444, P = 0.181, P = 0.835 and P = 0.911, respectively. Conclusion: Considering the limitations of this study, the snap-on implant-level impression technique resulted in more three-dimensional accuracy than TC and TC-Cap, but it was similar to the open-tray technique.

  13. The quality of impressions for crowns and bridges: an assessment of the work received at three commercial dental laboratories. assessing qualities of impressions that may lead to occlusal discrepancies with indirect restorations.

    Science.gov (United States)

    Storey, D; Coward, T J

    2014-03-01

    There are few published studies that directly assess the quality of impressions for crowns and bridges in the UK. This paper considers aspects of impression quality with particular attention to factors causing potential occlusal discrepancies in the final restoration. To this end three dental laboratories were visited over a 3-month period. All impressions for conventional crown and bridgework that arrived on the days of the visits were examined and assessed against criteria defined on a custom-designed assessment form. A total of 206 impression cases were considered in this study. Flexible impression trays were used for 65% of working impressions. Their use was more common for NHS work than for private work. 31.9% of all alginate impressions examined were not adequately fixed to the tray. Visible contamination of impressions was not uncommon.

  14. Impression management within the Zulu culture: Exploring tactics in the work context

    OpenAIRE

    Mtshelwane, Debrah; Nel, Jan Alewyn; Brink, Lizelle

    2016-01-01

    Orientation: Impression management tactics are utilised differently by people depending on the situation and the others around them. Research purpose: The purpose of the study was to identify the impression management tactics Zulu people display when they want to impress people in a work context. Motivation for this study: Organisations are competing for talented employees and people who contribute to the return on investment for the organisation. Individuals display impression tactic...

  15. Evaluation and comparison of dimensional accuracy of newly introduced elastomeric impression material using 3D laser scanners: an in vitro study.

    Science.gov (United States)

    Pandita, Amrita; Jain, Teerthesh; Yadav, Naveen S; Feroz, S M A; Pradeep; Diwedi, Akankasha

    2013-03-01

    Aim of the present study was to comparatively evaluate dimensional accuracy of newely introduced elastomeric impression material after repeated pours at different time intervals. In the present study a total of 20 (10 + 10) impressions of master model were made from vinyl polyether silicone and vinyl polysiloxane impression material. Each impression was repeatedly poured at 1, 24 hours and 14 days. Therefore, a total of 60 casts were obtained. Casts obtained were scanned with three-dimensional (3D) laser scanner and measurements were done. Vinyl polyether silicone produced overall undersized dies, with greatest change being 0.14% only after 14 days. Vinyl polysiloxane produced smaller dies after 1 and 24 hours and larger dies after 14 days, differing from master model by only 0.07% for the smallest die and to 0.02% for the largest die. All the deviations measured from the master model with both the impression materials were within a clinically acceptable range. In a typical fixed prosthodontic treatment accuracy of prosthesis is critical as it determines the success, failure and the prognosis of treatment including abutments. This is mainly dependent upon fit of prosthesis which in turn is dependent on dimensional accuracy of dies, poured from elastomeric impressions.

  16. Trigeminal neuralgia secondary to basilar impression: A case report

    Directory of Open Access Journals (Sweden)

    Maurus Marques de Almeida Holanda

    2015-01-01

    Full Text Available We report a rare case of trigeminal neuralgia. A 23-year-old woman with a history of 1 year of typical trigeminal neuralgia manifested the characteristics of basilar impression. Magnetic resonance imaging (MRI demonstrated basilar impression, deformity of the posterior fossa with asymmetry of petrous bone, and compression of medulla oblongata in the topography of the odontoid apophysis. The operation was performed through a suboccipital craniectomy. The neuralgia disappeared after surgery and remains completely resolved until today. This is the second reported case of trigeminal neuralgia in a patient with basilar impression in Brazil.

  17. Effect of Splinting on Dimensional Accuracy of Impressions Made of Implants with Different Subgingival Alignments.

    Science.gov (United States)

    Beyabanaki, Elaheh; Shamshiri, Ahmed Reza; Alikhasi, Marzieh; Monzavi, Abbas

    2017-01-01

    Placement of implants at deeper levels of gingiva is sometimes inevitable because of issues like esthetics or bone availability. The accuracy of impressions may be affected in these situations. The aim of this in vitro study was to evaluate the effects of splinting and length of impression copings on the accuracy of impressions made of deeply placed implants. A metal model with two parallel implants (Implantium; Dentium) was fabricated. One hundred and twenty impressions were made using the direct impression technique with and without splinting the impression copings (using short and long impression copings). Impressions were made of implants at three subgingival levels (1, 3, and 6 mm) using regular viscosity poly(vinyl siloxane). The impressions were poured with type IV dental stone. Displacements in the x, y, and z axes, as well as rotational discrepancies and interimplant distances were measured with a coordinate measuring machine. Data were analyzed with Kruskal-Wallis, Mann-Whitney, and nonparametric adjusted rank transform tests. There was less rotational displacement using longer impression copings at different subgingival positions of the implants, either with splinted or nonsplinted direct technique (p impressions at different apico-coronal levels of implants than the splinted technique using short impression copings (p impression copings yielded better results than shorter ones in both splinted and nonsplinted techniques. Also, nonsplinted short impression copings produced more accurate impressions than splinted short impression copings. © 2015 by the American College of Prosthodontists.

  18. Impression Management in Survey Responding: Easier for Collectivists or Individualists?

    Science.gov (United States)

    Riemer, Hila; Shavitt, Sharon

    2012-01-01

    Three experiments indicate that when individualists and collectivists engage in impression management on self-reports, they do so through different psychological mechanism s. Collectivists do so through a relatively automatic process. Thus, they can impression manage even when cognitively busy. Individualists impression manage through a more effortful process. Therefore, they can do so only when the situation permits effortful processing. These findings highlight distinct conditions under which social norms may influence consumer self-reports across cultures. PMID:23175618

  19. Impression Management in Survey Responding: Easier for Collectivists or Individualists?

    Science.gov (United States)

    Riemer, Hila; Shavitt, Sharon

    2011-04-01

    Three experiments indicate that when individualists and collectivists engage in impression management on self-reports, they do so through different psychological mechanism s. Collectivists do so through a relatively automatic process. Thus, they can impression manage even when cognitively busy. Individualists impression manage through a more effortful process. Therefore, they can do so only when the situation permits effortful processing. These findings highlight distinct conditions under which social norms may influence consumer self-reports across cultures.

  20. Current globalization of drug interventional clinical trials: characteristics and associated factors, 2011-2013.

    Science.gov (United States)

    Jeong, Sohyun; Sohn, Minji; Kim, Jae Hyun; Ko, Minoh; Seo, Hee-Won; Song, Yun-Kyoung; Choi, Boyoon; Han, Nayoung; Na, Han-Sung; Lee, Jong Gu; Kim, In-Wha; Oh, Jung Mi; Lee, Euni

    2017-06-21

    Clinical trial globalization is a major trend for industry-sponsored clinical trials. There has been a shift in clinical trial sites towards emerging regions of Eastern Europe, Latin America, Asia, the Middle East, and Africa. Our study objectives were to evaluate the current characteristics of clinical trials and to find out the associated multiple factors which could explain clinical trial globalization and its implications for clinical trial globalization in 2011-2013. The data elements of "phase," "recruitment status," "type of sponsor," "age groups," and "design of trial" from 30 countries were extracted from the ClinicalTrials.gov website. Ten continental representative countries including the USA were selected and the design elements were compared to those of the USA. Factors associated with trial site distribution were chosen for a multilinear regression analysis. The USA, Germany, France, Canada, and United Kingdom were the "top five" countries which frequently held clinical trials. The design elements from nine continental representative countries were quite different from those of the USA; phase 1 trials were more prevalent in India (OR 1.517, p globalization of clinical trials in the emerging regions of Asia, South Africa, and Eastern Europe developed in parallel with the factors of economic drive, population for recruitment, and regulatory constraints.

  1. Experimental study on the use of spacer foils in two-step putty and wash impression procedures using silicone impression materials.

    Science.gov (United States)

    Mann, Karsten; Davids, Andreas; Range, Ursula; Richter, Gert; Boening, Klaus; Reitemeier, Bernd

    2015-04-01

    The 2-step putty and wash impression technique is commonly used in fixed prosthodontics. However, cutting sluiceways to allow the light-body material to drain is time-consuming. A solution might be the use of a spacer foil. The purpose of this study was to evaluate the influence of spacer foil on the margin reproduction and dimensional accuracy of 2-step putty and wash impressions. Two methods of creating space for the wash material in a 2-step putty and wash impression were compared: the traditional cutout technique and a spacer foil. Eleven commercially available combinations of silicone impression materials were included in the study. The impressions and the cast production were carried out under standardized conditions. All casts were measured with a 3-dimensional (3D) coordinate measuring machine. Preparation margin reproduction and the diameters and spacing of the stone cast dies were measured (α=.05). The 2 methods showed significant differences (P<.05) in the reproduction of the preparation margins (complete reproduction cutout, 90% to 98%; foil, 74% to 91%). The use of a foil resulted in greater dimensional accuracy of the cast dies compared to the cutout technique. Cast dies from the cutout technique were significantly smaller than the metallic original cast (cutout median, 4.55 mm to 4.61 mm; foil median, 4.61 to 4.64). Spacing between the dies revealed only a few additional significant differences between the techniques. When spacer foils were used, dies were obtained that better corresponded to the original tooth. Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

  2. Impression management and food intake. Current directions in research.

    Science.gov (United States)

    Vartanian, Lenny R

    2015-03-01

    This paper reviews recent research on consumption stereotypes (judgments of others based on what they eat) and impression management (modifying one's eating behavior in order to create a particular impression). A major recent focus in the literature has been on masculinity and meat eating, with research showing that meat is strongly associated with masculinity, and that individuals who follow a meat-based diet are perceived as more masculine than are individuals who follow a vegetarian diet. Although direct evidence for impression management through food intake remains sparse, a number of methodological approaches (including priming techniques and ecological valid assessments) are described that could be used in future research to identify the motives underlying people's eating behavior. Consumption stereotypes and impression management may be important influences on people's eating behavior, but the complexities of how, when, and for whom these factors influence food intake are still not well understood. Copyright © 2014 Elsevier Ltd. All rights reserved.

  3. The use of acupuncture in controlling the gag reflex in patients requiring an upper alginate impression: an audit.

    Science.gov (United States)

    Rosted, P; Bundgaard, M; Fiske, J; Pedersen, A M L

    2006-12-09

    A pronounced gag reflex (GR) can be a problem to both the acceptance and delivery of dental treatment. Despite a range of management strategies, some patients cannot accept even simple dental treatment. The aim of this study was to evaluate the use of acupuncture point CV-24 in controlling a profound gag reflex during dental treatment requiring an upper alginate impression. Members of the British Dental Acupuncture Society were invited to take part in an audit of the role of acupuncture point CV-24 in controlling the gag reflex. They were issued with patient inclusion criteria, a standardised procedure instruction sheet and a recording form. All patients fulfilling the inclusion criteria had an upper dental alginate impression taken (or an attempt made at it) before acupuncture, and a second upper alginate impression taken immediately after acupuncture of point CV-24. The GR assessment was undertaken prior to insertion of the acupuncture needle using the Gagging Severity Index (GSI); and after the acupuncture and impression taking using the Gagging Prevention Index (GPI). Both the GSI and GPI were recorded at three stages of the dental impression taking procedure, ie, when the empty impression tray was tried in the mouth, when the loaded tray was inserted into the mouth, and on completion of the impression taking. Twenty-one dentists submitted 64 case reports of which 37 fulfilled the inclusion criteria. Prior to acupuncture all 37 patients (20 females and 17 males with a mean age of 46.8 years) were unable to accept the impression taking. After acupuncture of point CV-24, an improvement of between 51-55% (mean 53%) for the three stages of impression taking was noticed. Thirty patients (81%) were able to accept the impression taking, whereas seven (19%) remained unable to tolerate the procedure. Assessed by the GSI and GPI, there was a significant decrease in GR scores at all three stages of the impression taking procedure (median 3 vs 1; 4 vs 2; 4 vs 2; p dental

  4. Does quality improvement work in neonatology improve clinical outcomes?

    Science.gov (United States)

    Ellsbury, Dan L; Clark, Reese H

    2017-04-01

    Quality improvement initiatives in neonatology have been promoted as an important way of improving outcomes of newborns. The purpose of this review is to examine the effectiveness of recent quality improvement work in improving the outcomes of infants requiring neonatal intensive care. Quality improvement collaboratives and single-center projects demonstrate improvement of clinical processes and outcomes in neonatology that impact both preterm and term infants. Declines in morbidities, resource use, and length of stay have been associated with reductions in healthcare costs. Recent quality improvement work has shown evidence of improvement in clinical outcomes in neonatal intensive care patients. These improvements have important implications for the reduction of healthcare costs in this population.

  5. Do clinical safety charts improve paramedic key performance indicator results? (A clinical improvement programme evaluation).

    Science.gov (United States)

    Ebbs, Phillip; Middleton, Paul M; Bonner, Ann; Loudfoot, Allan; Elliott, Peter

    2012-07-01

    Is the Clinical Safety Chart clinical improvement programme (CIP) effective at improving paramedic key performance indicator (KPI) results within the Ambulance Service of New South Wales? The CIP intervention area was compared with the non-intervention area in order to determine whether there was a statistically significant improvement in KPI results. The CIP was associated with a statistically significant improvement in paramedic KPI results within the intervention area. The strategies used within this CIP are recommended for further consideration.

  6. Disinfection of Dental Impressions Prior to Handling at Muhimbili ...

    African Journals Online (AJOL)

    All four dental technicians who handled the received impressions were interviewed. Questions asked were on practice and attitudes and responses were on different point scales. Results are based on information gathered from the dental technicians. Results: Of the 1,453 impressions received none were reported to have ...

  7. Expression of Vascular Endothelial Growth Factor in Odontogenic Cysts: Is There Any Impression on Clinical Outcome?

    Science.gov (United States)

    Sadri, Donia; Farhadi, Sareh; Shahabi, Zahra; Sarshar, Samaneh

    2016-01-01

    The recent scientific reports have shown that angiogenesis can affect biological behavior of pathologic lesions. Regarding unique clinical outcome of Odontogenic keratocyst (OKC), the present study was aimed to compare angiogenesis in Odontogenic keratocyst and Dentigerous cyst (DC). In this experimental study, tissue sections of 46 samples of OKC and DC were stained through immunohistochemical method using Vascular Endothelial Growth Factor (VEGF) antibody. VEGF expression was evaluated in epithelial cells, fibroblasts and endothelial cells. The average percentage of stained cells in any samples was categorized to 3 groups as follows: SCORE 0: 10% of cells or less are positive. SCORE 1: 10 to 50% of cells are positive. SCORE 2: more than 50% of cells are positive. Mann-U-Whitney, T-test and chi-square was used for statistical analysis. The average of VEGF expression in 24 samples of DC was 20.2% and in 22 samples of OKC was 52.6%, respectively. The average of VEGF expression in these two cysts had statistical significant differences. (PV= 0.045). There was significant statistical differences between two cysts in the terms of VEGF SCORE (PV= 0.000). OKC samples had significantly higher SCORE for the purpose of VEGF incidence than DC. Also, there were no differences between VEGF expression in epithelial cells of two cysts (PV= 0.268) there were significant statistical differences between two cysts in terms of endothelial cell staining. The endothelial cell staining was significantly higher in OKC than DC (PV= 0.037%). Regarding higher expression of Vascular Endothelial Growth factor in OKC than DC, it seems that angiogenesis may have great impression on clinical outcome of OKC.

  8. Transcranial direct current stimulation on primary sensorimotor area has no effect in patients with drug-naïve restless legs syndrome: a proof-of-concept clinical trial.

    Science.gov (United States)

    Koo, Yong Seo; Kim, Sung Min; Lee, Chany; Lee, Byeong Uk; Moon, Ye Ji; Cho, Yong Won; Im, Chang-Hwan; Choi, Jeong Woo; Kim, Kyung Hwan; Jung, Ki-Young

    2015-02-01

    To evaluate the efficacy of transcranial direct current stimulation (tDCS) in people with drug-naïve restless legs syndrome (RLS). A two-week, double-blind, randomized, sham-controlled trial was performed. Thirty-three females with RLS were recruited. Participants received five sessions of tDCS using cathodal, anodal or sham stimulation. They were assessed at baseline (T0), three days (T1) and 13 days (T2) after the end of tDCS. Primary outcomes included the International RLS Group Rating Scale (IRLS) and the Clinical Global Impressions-Improvement (CGI-I). Secondary outcomes included the Patient Global Impression scale, the Pittsburgh Sleep Quality Index, the Medical Outcome Study sleep subscales, and the Beck Depression Inventory. Objective neurophysiological changes were assessed using event-related desynchronization/synchronization (ERD/ERS) of electroencephalography. The changes in the IRLS scores, as well as the responder rate in the CGI-I scale, did not differ significantly among the groups. There was also no significant difference in any of the secondary outcome measures and ERD/ERS among the groups. Transcranial direct current stimulation with electrodes on the sensorimotor areas showed no significant effect in people with drug-naïve RLS. Copyright © 2014 Elsevier B.V. All rights reserved.

  9. Relationship between the clinical global impression of severity for schizoaffective disorder scale and established mood scales for mania and depression.

    Science.gov (United States)

    Turkoz, Ibrahim; Fu, Dong-Jing; Bossie, Cynthia A; Sheehan, John J; Alphs, Larry

    2013-08-15

    This analysis explored the relationship between ratings on HAM-D-17 or YMRS and those on the depressive or manic subscale of CGI-S for schizoaffective disorder (CGI-S-SCA). This post hoc analysis used the database (N=614) from two 6-week, randomized, placebo-controlled studies of paliperidone ER versus placebo in symptomatic subjects with schizoaffective disorder assessed using HAM-D-17, YMRS, and CGI-S-SCA scales. Parametric and nonparametric regression models explored the relationships between ratings on YMRS and HAM-D-17 and on depressive and manic domains of the CGI-S-SCA from baseline to the 6-week end point. A clinically meaningful improvement was defined as a change of 1 point in the CGI-S-SCA score. No adjustment was made for multiplicity. Multiple linear regression models suggested that a 1-point change in the depressive domain of CGI-S-SCA corresponded to an average 3.6-point (SE=0.2) change in HAM-D-17 score. Similarly, a 1-point change in the manic domain of CGI-S-SCA corresponded to an average 5.8-point (SE=0.2) change in YMRS score. Results were confirmed using local and cumulative logistic regression models in addition to equipercentile linking. Lack of subjects scoring over the complete range of possible scores may limit broad application of the analyses. Clinically meaningful score changes in depressive and manic domains of CGI-S-SCA corresponded to approximately 4- and 6-point score changes on HAM-D-17 and YMRS, respectively, in symptomatic subjects with schizoaffective disorder. Copyright © 2013 Elsevier B.V. All rights reserved.

  10. Impression management within the Zulu culture: Exploring tactics in the work context

    Directory of Open Access Journals (Sweden)

    Debrah Mtshelwane

    2016-08-01

    Full Text Available Orientation: Impression management tactics are utilised differently by people depending on the situation and the others around them. Research purpose: The purpose of the study was to identify the impression management tactics Zulu people display when they want to impress people in a work context. Motivation for this study: Organisations are competing for talented employees and people who contribute to the return on investment for the organisation. Individuals display impression tactics to influence the perceptions of others in the workplace, especially pertaining to performance appraisals and promotional opportunities. Research approach, design and method: The social constructivism paradigm was employed in conducting this study, following a phenomenological approach. The research sample consisted of 30 Zulu-speaking individuals from various organisations who were interviewed through semi-structured interviews. The researcher used thematic analysis to analyse the data. Main findings: The main findings in this study included impression management tactics that are used by Zulu people when attempting to impress people in the work context. The findings were divided into different categories (colleagues and supervisor. Conscientiousness,interpersonal amiability, openness and relational action are the themes that were reported as the most common impression management features people display at their workplace with colleagues. Themes that were reported when impressing a supervisor include conscientiousness,integrity, relational action and skilfulness. Practical/managerial implications: This study provides organisations with knowledge on the impression management tactics utilised by isiZulu employees. The nature of this information enables management to not misinterpret the use of certain tactics and will lead to more understanding and resilience by organisations and colleagues when working with isiZulu individuals. Contribution/value-add: This study

  11. Clinical engagement: improving healthcare together.

    Science.gov (United States)

    Riches, E; Robson, B

    2014-02-01

    Clinical engagement can achieve lasting change in the delivery of healthcare. In October 2011, Healthcare Improvement Scotland formulated a clinical engagement strategy to ensure that a progressive and sustainable approach to engaging healthcare professionals is firmly embedded in its health improvement and public assurance activities. The strategy was developed using a 90-day process, combining an evidence base of best practice and feedback from semi-structured interviews and focus groups. The strategy aims to create a culture where clinicians view working with Healthcare Improvement Scotland as a worthwhile venture, which offers a number of positive benefits such as training, career development and research opportunities. The strategy works towards developing a respectful partnership between Healthcare Improvement Scotland, the clinical community and key stakeholders whereby clinicians' contributions are recognised in a non-financial reward system. To do this, the organisation needs a sustainable infrastructure and an efficient, cost-effective approach to clinical engagement. There are a number of obstacles to achieving successful clinical engagement and these must be addressed as key drivers in its implementation. The implementation of the strategy is supported by an action and resource plan, and its impact will be monitored by a measurement plan to ensure the organisation reviews its approaches towards clinical engagement.

  12. 106例儿童孤独症的临床特征分析%Clinical Analysis for 106 Cases of Childhood Autism

    Institute of Scientific and Technical Information of China (English)

    张新波; 柯晓燕; 罗硕军; 林节

    2002-01-01

    Objective To investigate the clinical features of childhood autism. Methods Clinical analysis for 106 casesof clildhood autism by Childhood Autism Rating Scale (CARS) .Results Onset age on0~ 11 month's autism are severe than11 ~ 23 month and 24 ~ 36 month, especially on human relatedness, use of body, relation to objects, visual responsiveness,auditory responsiveness, verbal sommunication and global impression. Cocnclusion The chnical features of childhood autismrelate to onset age.

  13. Dimensional Stability of Two Polyvinyl Siloxane Impression Materials in Different Time Intervals

    Directory of Open Access Journals (Sweden)

    Aalaei Sh

    2015-12-01

    Full Text Available Statement of the Problem: Dental prosthesis is usually made indirectly; there- fore dimensional stability of the impression material is very important. Every few years, new impression materials with different manufacturers’ claims regarding their better properties are introduced to the dental markets which require more research to evaluate their true dimensional changes. Objectives: The aim of this study was to evaluate dimensional stability of additional silicone impression material (Panasil® and Affinis® in different time intervals. Materials and Methods: In this experimental study, using two additional silicones (Panasil® and Affinis®, we made sixty impressions of standard die in similar conditions of 23 °C and 59% relative humidity by a special tray. The die included three horizontal and two vertical lines that were parallel. The vertical line crossed the horizontal ones at a point that served as reference for measurement. All impressions were poured with high strength dental stone. The dimensions were measured by stereo-microscope by two examiners in three interval storage times (1, 24 and 168 hours.The data were statistically analyzed using t-test and ANOVA. Results: All of the stone casts were larger than the standard die. Dimensional changes of Panasil and Affinis were 0.07%, 0.24%, 0.27% and 0.02%, 0.07%, 0.16% after 1, 24 and 168 hours, respectively. Dimensional change for two impression materials wasn’t significant in the interval time, expect for Panasil after one week (p = 0.004. Conclusions: According to the limitations of this study, Affinis impressions were dimensionally more stable than Panasil ones, but it was not significant. Dimensional change of Panasil impression showed a statistically significant difference after one week. Dimensional changes of both impression materials were based on ADA standard limitation in all time intervals (< 0.5%; therefore, dimensional stability of this impression was accepted at least

  14. Accuracy of the One-Stage and Two-Stage Impression Techniques: A Comparative Analysis.

    Science.gov (United States)

    Jamshidy, Ladan; Mozaffari, Hamid Reza; Faraji, Payam; Sharifi, Roohollah

    2016-01-01

    Introduction . One of the main steps of impression is the selection and preparation of an appropriate tray. Hence, the present study aimed to analyze and compare the accuracy of one- and two-stage impression techniques. Materials and Methods . A resin laboratory-made model, as the first molar, was prepared by standard method for full crowns with processed preparation finish line of 1 mm depth and convergence angle of 3-4°. Impression was made 20 times with one-stage technique and 20 times with two-stage technique using an appropriate tray. To measure the marginal gap, the distance between the restoration margin and preparation finish line of plaster dies was vertically determined in mid mesial, distal, buccal, and lingual (MDBL) regions by a stereomicroscope using a standard method. Results . The results of independent test showed that the mean value of the marginal gap obtained by one-stage impression technique was higher than that of two-stage impression technique. Further, there was no significant difference between one- and two-stage impression techniques in mid buccal region, but a significant difference was reported between the two impression techniques in MDL regions and in general. Conclusion . The findings of the present study indicated higher accuracy for two-stage impression technique than for the one-stage impression technique.

  15. A metric study of insole foot impressions in footwear of identical twins.

    Science.gov (United States)

    Nirenberg, Michael S; Krishan, Kewal; Kanchan, Tanuj

    2017-11-01

    Foot impressions are of utmost importance in crime scene investigations. Foot impressions are available in the form of barefoot prints, sock-clad footprints, and as impressions within footwear. Sometimes suspects leave their footwear at the crime scene, and the insole of this footwear may contain the foot impression of the suspect which may be important evidence linking him or her to the crime. The task of identification based on the analysis of footprints can be challenging when the footprints belonging to one of the identical twin is available for examination. The present study is based on the quantitative measures of the foot impressions in the footwear of adult identical twins. The study was conducted on four sets of female monozygotic twins from the United States of America. A total of 17 length and breadth measurements were taken on each foot impression. A combination of Reel Method and Extended Gunn Method was utilized to produce the measurements. The measurements of the foot impressions were compared among the twins on the right and the left side. Differences were found in the various footprint measurements among the twins. The study's sample size was not large enough to apply robust statistical tests, but the study is significant in that it presents the first detailed comparative analysis of a large number of measurements of insole foot impressions of adult twins. The observations derived from the study are likely to assist forensic investigations in cases involving the foot impressions of the twins. Copyright © 2017 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

  16. Improvement of the clinical outcome in Ankylosing spondylitis by balneotherapy.

    Science.gov (United States)

    Yurtkuran, Merih; Ay, Alev; Karakoç, Yüksel

    2005-07-01

    This study is designed to show the efficacy of balneotherapy and balneotherapy (BT) + nonsteroid antiinflammatory drug (NSAID) use in Ankylosing spondylitis (AS) patients. In this prospective study, BT, BT+ NSAID and NSAID therapy in 61 patients with AS were evaluated by ASAS core set. BT group (21 patients) was treated only with BT for 20 min, once a day, 5 days a week, over a period of 3 weeks. BT+NSAID group (20 patients) was treated with 1000 mg naproxen as well as BT. NSAID group (20 patients) was treated with 1000 mg naproxen. All of the participants did respiratory and postural exercises for 20 min a day and for the whole study period. Each patient was evaluated on admission (before treatment), at the end of the therapy and 6 months after the treatment. At the end of the study, statistically significant improvement was observed in all the clinical parameters of the patients in BT (G1), BT+NSAID (G2) and NSAID (G3) groups. This significant symptomatic and clinical improvement was maintained even 6 months after the treatment. The changes from baseline to follow up were similar in G1 and G2 except duration of morning stiffness (DMS) and chest expansion (CE). Improvements in CE and DMS were better in G1 and G2, respectively. Improvements observed in G1 and G2 were superior to the improvements observed in G3 for the variables of morning pain, nocturnal pain, DMS, global well being of the patient, occiput-wall distance, CE, finger to floor distance and functional index. In Schober test, improvement observed in G1 was statistically superior to G3. We concluded that BT can be suggested as an effective symptomatic treatment modality in patients with AS. Furthermore, sufficient improvement in clinical parameters can be obtained by BT alone.

  17. Impression Procedures for Metal Frame Removable Partial Dentures as Applied by General Dental Practitioners.

    Science.gov (United States)

    Fokkinga, Wietske A; van Uchelen, Judith; Witter, Dick J; Mulder, Jan; Creugers, Nico H J

    2016-01-01

    This pilot study analyzed impression procedures for conventional metal frame removable partial dentures (RPDs). Heads of RPD departments of three dental laboratories were asked to record features of all incoming impressions for RPDs during a 2-month period. Records included: (1) impression procedure, tray type (stock/custom), impression material (elastomer/alginate), use of border-molding material (yes/no); and (2) RPD type requested (distal-extension/tooth-bounded/combination). Of the 132 total RPD impressions, 111 (84%) involved custom trays, of which 73 (55%) were combined with an elastomer. Impression border-molding material was used in 4% of the cases. Associations between impression procedure and RPD type or dentists' year/university of graduation were not found.

  18. Group cognitive behavioral therapy to improve the quality of care to opioid-treated patients with chronic noncancer pain: a practice improvement project.

    Science.gov (United States)

    Whitten, Stacey K; Stanik-Hutt, Julie

    2013-07-01

    To enhance outcomes of patients with chronic noncancer pain (CNCP) treated with opioids in a primary care setting by implementing an evidence-based quality improvement project. The project consisted of the implementation of a 6-week cognitive behavioral therapy (CBT) program. Twenty-two patients with CNCP completed the program. Impact of the project was evaluated by comparing pre- and postintervention participant self-reports of mood on the Beck Depression Inventory and functional status on the Brief Pain Inventory and Short Form-36. Patient perception of treatment benefit was also measured using the Patient Global Impression of Change. Qualitative provider perceptions of the program were also collected. Paired t-test statistics were used to analyze the data. Mood (including negative attitude, performance difficulty, and physical complaints), and patient impression of treatment benefit improved significantly after CBT was added. Primary care providers reported that the CBT supported their overall management of these complex patients. The addition of a CBT program improved selected outcomes in this self-selected sample of patients with CNCP treated with opioids. ©2012 The Author(s) ©2012 American Association of Nurse Practitioners.

  19. Something has shifted: Nursing students' global perspective following international clinical placements.

    Science.gov (United States)

    Gower, Shelley; Duggan, Ravani; Dantas, Jaya A R; Boldy, Duncan

    2017-10-01

    To examine understandings of global health issues among nursing students following participation in an international clinical placement during their pre-registration university education. Universities use international clinical placements, especially in developing countries, to develop cultural awareness in students; however, little is known about the longer term influences on students' understandings of global nursing. A retrospective cross-sectional design was used, using an exploratory, descriptive qualitative approach. Individual semi-structured interviews were conducted in 2014 with a purposive sample of 25 pre-registration nursing students from four Western Australian universities who undertook clinical placements across five countries. Data were analysed using inductive thematic analysis. Findings highlight that students developed new understandings around health systems including fragility of resource access, differences in clinical practice and variances in nursing roles between settings. Students also experienced challenges but were able to appreciate alternative world viewpoints. International clinical placements can develop greater awareness and help students form realistic strategies for using their nursing skills globally. Pre-placement training in cultural awareness and health system realities, along with strong supervisory support, is critical to success. © 2017 John Wiley & Sons Ltd.

  20. Interpretation of appearance: the effect of facial features on first impressions and personality

    DEFF Research Database (Denmark)

    Wolffhechel, Karin Marie Brandt; Fagertun, Jens; Jacobsen, Ulrik Plesner

    2014-01-01

    Appearance is known to influence social interactions, which in turn could potentially influence personality development. In this study we focus on discovering the relationship between self-reported personality traits, first impressions and facial characteristics. The results reveal that several...... personality traits can be read above chance from a face, and that facial features influence first impressions. Despite the former, our prediction model fails to reliably infer personality traits from either facial features or first impressions. First impressions, however, could be inferred more reliably from...... facial features. We have generated artificial, extreme faces visualising the characteristics having an effect on first impressions for several traits. Conclusively, we find a relationship between first impressions, some personality traits and facial features and consolidate that people on average assess...

  1. In vitro evaluation of prosthodontic impression on natural dentition: a comparison between traditional and digital techniques

    Science.gov (United States)

    MALAGUTI, G.; ROSSI, R.; MARZIALI, B.; ESPOSITO, A.; BRUNO, G.; DARIOL, C.; DI FIORE, A.

    2016-01-01

    SUMMARY Objectives The aim of this in vitro study is to evaluate the marginal and internal fit of zirconia core crowns manufactured following different digital and traditional workflows. Methods A 6° taper shoulder prepared abutment tooth was used to produce 20 zirconia core crowns using four different scanning techniques: scanned directly with the extraoral lab scanner, scanned with intraoral scanner, dental impressions using individual dental tray and polyether, dental casts from a polyether impressions. Marginal and internal fits were evaluated with digital photography and the silicone replica method. Results Medium marginal gaps were 76,00 μm ± 28.9 for extraoral lab scanner, 80.50 μm ± 36,2 for intraoral scanner, 88.10 μm ± 34,8 for dental impression scan and 112,4 μm ± 37,2 for dental cast scan. Medium internal gaps were 23.20 μm ± 10,3 for extraoral lab scanner, 16.20 μm ± 8.3 for intraoral scanner, 27.20 μm ± 16.7 for dental impression scan and 30.20 μm ± 12.7 for dental cast scan. Conclusion Internal gap were extensively lower than 70 μm described in literature. Marginal fit was higher than ideal values for all the techniques but within the limit of clinical success. Intraoral scanners obtained the best results for internal gap. PMID:28280529

  2. Collection of Wet-Origin Footwear Impressions on Various Surfaces Using an Electrostatic Dust Print Lifter.

    Science.gov (United States)

    Hong, Sungwook; Park, Miseon

    2018-01-19

    Electrostatic dust print lift method is known to be able to recover only dry-origin footwear impression. However, the wet-origin footwear impression could also be recovered using this method. As the amount of dust accumulated before deposition of the wet-origin footwear impression increased, the intensity of the footwear impression lifted with this method became stronger. If the footwear impression is not affected by moisture after it is made, the 28-h old wet-origin footwear impression could be recovered using this method. The intensity of the lifted footwear impression did not decrease significantly even when the number of sequential steps increased as long as the shoe sole is wet. However, when the moisture on the shoe sole depleted, the intensity of the footwear impression decreased sharply. This method has the advantage of being able to enhance the footwear impression without being affected by the footwear impressions deposited in the past. © 2018 American Academy of Forensic Sciences.

  3. Accuracy of the One-Stage and Two-Stage Impression Techniques: A Comparative Analysis

    Directory of Open Access Journals (Sweden)

    Ladan Jamshidy

    2016-01-01

    Full Text Available Introduction. One of the main steps of impression is the selection and preparation of an appropriate tray. Hence, the present study aimed to analyze and compare the accuracy of one- and two-stage impression techniques. Materials and Methods. A resin laboratory-made model, as the first molar, was prepared by standard method for full crowns with processed preparation finish line of 1 mm depth and convergence angle of 3-4°. Impression was made 20 times with one-stage technique and 20 times with two-stage technique using an appropriate tray. To measure the marginal gap, the distance between the restoration margin and preparation finish line of plaster dies was vertically determined in mid mesial, distal, buccal, and lingual (MDBL regions by a stereomicroscope using a standard method. Results. The results of independent test showed that the mean value of the marginal gap obtained by one-stage impression technique was higher than that of two-stage impression technique. Further, there was no significant difference between one- and two-stage impression techniques in mid buccal region, but a significant difference was reported between the two impression techniques in MDL regions and in general. Conclusion. The findings of the present study indicated higher accuracy for two-stage impression technique than for the one-stage impression technique.

  4. A double-blind placebo-controlled study of controlled release fluvoxamine for the treatment of generalized social anxiety disorder.

    Science.gov (United States)

    Westenberg, Herman G M; Stein, Dan J; Yang, Haichen; Li, David; Barbato, Luigi M

    2004-02-01

    This was a randomized double-blind placebo-controlled multicenter study to assess the efficacy, safety, and tolerability of fluvoxamine in a controlled release (CR) formulation for treatment of generalized social anxiety disorder (GSAD). A total of 300 subjects with GSAD were randomly assigned to receive either fluvoxamine CR (N = 149) or placebo (N = 151) for 12 weeks. Mean changes from baseline to end point in Liebowitz Social Anxiety Scale (LSAS), Clinical Global Impression Severity of Illness Scale (CGI-S), Sheehan Disability Scale (SDS), as well as the mean end point scores in Clinical Global Impression Improvement Scale (CGI-I) and Patient Global Impression of Improvement Scale (PGI) were compared between the fluvoxamine CR and placebo treatment groups. Arizona Sexual Experience Scale (ASEX), adverse event, and other safety parameters were also assessed. The results demonstrated that fluvoxamine CR was significantly superior to placebo in decreasing LSAS total score (primary measure) starting at week 4. At end point, there was a mean change from baseline of -36.1 +/- 2.7 (37% reduction) in the LSAS total score in the fluvoxamine CR group compared with -27.3 +/- 2.4 (28% reduction) in the placebo group (P = 0.020 for mean change). Fluvoxamine CR was also significantly superior to placebo in SDS, CGI-S, CGI-I at end point (secondary measures). When compared with placebo, fluvoxamine CR did not cause any significant weight gain or clinically significant sexual dysfunction as measured by ASEX. In summary, fluvoxamine CR is an efficacious, safe, and well-tolerated treatment of generalized social anxiety disorder.

  5. Improvement of Clinical Skills through Pharmaceutical Education and Clinical Research.

    Science.gov (United States)

    Ishizaki, Junko

    2017-01-01

    Professors and teaching staff in the field of pharmaceutical sciences should devote themselves to staying abreast of relevant education and research. Similarly those in clinical pharmacies should contribute to the advancement of pharmaceutical research and the development of next generation pharmacists and pharmaceuticals. It is thought that those who work in clinical pharmacies should improve their own skills and expertise in problem-finding and -solving, i.e., "clinical skills". They should be keen to learn new standard treatments based on the latest drug information, and should try to be in a position where collecting clinical information is readily possible. In the case of pharmacists in hospitals and pharmacies, they are able to aim at improving their clinical skills simply through performing their pharmaceutical duties. On the other hand, when a pharmaceutical educator aims to improve clinical skills at a level comparable to those of clinical pharmacists, it is necessary to devote or set aside considerable time for pharmacist duties, in addition to teaching, which may result in a shortage of time for hands-on clinical practice and/or in a decline in the quality of education and research. This could be a nightmare for teaching staff in clinical pharmacy who aim to take part in such activities. Nonetheless, I believe that teaching staff in the clinical pharmacy area could improve his/her clinical skills through actively engaging in education and research. In this review, I would like to introduce topics on such possibilities from my own experiences.

  6. A randomized, placebo-controlled, double-blinded trial of duloxetine in the treatment of general fatigue in patients with chronic fatigue syndrome.

    Science.gov (United States)

    Arnold, Lesley M; Blom, Thomas J; Welge, Jeffrey A; Mariutto, Elizabeth; Heller, Alicia

    2015-01-01

    To assess the efficacy and safety of duloxetine in patients with chronic fatigue syndrome. A 12-week, randomized, double-blind study was designed to compare duloxetine 60-120 mg/d (n = 30) with placebo (n = 30) for efficacy and safety in the treatment of patients with chronic fatigue syndrome. The primary outcome measure was the Multidimensional Fatigue Inventory general fatigue subscale (range: 4-20, with higher scores indicating greater fatigue). Secondary measures were the remaining Multidimensional Fatigue Inventory subscales, Brief Pain Inventory, Medical Outcomes Study Short Form-36, Hospital Anxiety and Depression Scale, Centers for Disease Control and Prevention Symptom Inventory, Patient Global Impression of Improvement, and Clinical Global Impression of Severity. The primary analysis of efficacy for continuous variables was a longitudinal analysis of the intent-to-treat sample, with treatment-by-time interaction as the measure of effect. The improvement in the Multidimensional Fatigue Inventory general fatigue scores for the duloxetine group was not significantly greater than for the placebo group (P = 0.23; estimated difference between groups at week 12 = -1.0 [95% CI: -2.8, 0.7]). The duloxetine group was significantly superior to the placebo group on the Multidimensional Fatigue Inventory mental fatigue score, Brief Pain Inventory average pain severity and interference scores, Short Form-36 bodily pain domain, and Clinical Global Impression of Severity score. Duloxetine was generally well tolerated. The primary efficacy measure of general fatigue did not significantly improve with duloxetine when compared with placebo. Significant improvement in secondary measures of mental fatigue, pain, and global measure of severity suggests that duloxetine may be efficacious for some chronic fatigue syndrome symptom domains, but larger controlled trials are needed to confirm these results. Copyright © 2015 The Academy of Psychosomatic Medicine. Published by

  7. Developing the Perfect Pitch: Creating a Positive First Impression through Social Media

    Science.gov (United States)

    Edmiston, Dawn

    2016-01-01

    Too often we take for granted first impressions and how others perceive us, but such perceptions frequently form the basis for personal and professional success. Today, many first impressions are made online through search engine results and social networks. To ensure that students make a positive first impression, this teaching innovation…

  8. Social desirability scales as indicators of self-enhancement and impression management.

    Science.gov (United States)

    Parmač Kovačić, Maja; Galić, Zvonimir; Jerneić, Željko

    2014-01-01

    This article presents 2 studies testing Paulhus's (2002) assumption that unconscious self-enhancement and conscious impression management represent separate processes of socially desirable responding (SDR) that can be observed within 2 content domains (egoistic and moralistic bias). In Study 1, we devised egoistic and moralistic SDR scales intended to measure self-enhancement in honest responding and impression management under demands for positive self-presentation. In Study 2, we correlated scores on these scales with external indicators of self-enhancement and impression management. In honest responding, both SDR scales most strongly correlated with self-enhancement indicators, whereas under demands for positive self-presentation they correlated more strongly with external measures of impression management.

  9. Use of peers to improve adherence to antiretroviral therapy: a global network meta-analysis.

    Science.gov (United States)

    Kanters, Steve; Park, Jay Jh; Chan, Keith; Ford, Nathan; Forrest, Jamie; Thorlund, Kristian; Nachega, Jean B; Mills, Edward J

    2016-01-01

    It is unclear whether using peers can improve adherence to antiretroviral therapy (ART). To construct the World Health Organization's global guidance on adherence interventions, we conducted a systematic review and network meta-analysis to determine the effectiveness of using peers for achieving adequate adherence and viral suppression. We searched for randomized clinical trials of peer-based interventions to promote adherence to ART in HIV populations. We searched six electronic databases from inception to July 2015 and major conference abstracts within the last three years. We examined the outcomes of adherence and viral suppression among trials done worldwide and those specific to low- and middle-income countries (LMIC) using pairwise and network meta-analyses. Twenty-two trials met the inclusion criteria. We found similar results between pairwise and network meta-analyses, and between the global and LMIC settings. Peer supporter+Telephone was superior in improving adherence than standard-of-care in both the global network (odds-ratio [OR]=4.79, 95% credible intervals [CrI]: 1.02, 23.57) and the LMIC settings (OR=4.83, 95% CrI: 1.88, 13.55). Peer support alone, however, did not lead to improvement in ART adherence in both settings. For viral suppression, we found no difference of effects among interventions due to limited trials. Our analysis showed that peer support leads to modest improvement in adherence. These modest effects may be due to the fact that in many settings, particularly in LMICs, programmes already include peer supporters, adherence clubs and family disclosures for treatment support. Rather than introducing new interventions, a focus on improving the quality in the delivery of existing services may be a more practical and effective way to improve adherence to ART.

  10. A Comparative Analysis of Master Casts Obtained using Different Surface Treatments on Impression Copings for Single Tooth Implant Replacement -An In vitro Study.

    Science.gov (United States)

    Abrol, Surbhi; Nagpal, Archana; Kaur, Rupandeep; Verma, Ramit; Katna, Vishal; Gupt, Parikshit

    2017-08-01

    Minor rotation of impression coping secured in the impression is an avoidable error that needs to be minimized to ensure precise positioning of implant analog in master cast. The aim of the study was to compare the precision in obtaining master casts by improving the stability of impression copings in the impression with the use of tray adhesive along various surface treatments to increase surface area and by mechanical locking. A total of 60 samples were made (15 samples for each group). A total of 15 samples for Group I were prepared with untreated impression copings, 15 samples for Group II with impression copings treated and modified by application of tray adhesive only. Group III includes 15 samples which were fabricated with impression copings modified by making four vertical grooves on surface of impression coping and coated with adhesive. Group IV had 15 samples which were fabricated with impression copings sandblasted with 50 μm aluminum oxide powder and coated with adhesive. Profile projector was used to evaluate the rotational accuracy of the implant analogs by comparing Molar Implant Angle (MIA) and Premolar Implant Angle (PIA) of test samples with reference model. One-way ANOVA and Student t-test were used to analyze the data. One-way ANOVA didn't show any significant differences for both MIA and PIA between the Groups I, II, III and IV. Student's unpaired t-test revealed no significant difference in the mean MIA and mean PIA. Conclusion: Though results were statistically non-significant, all types of surface treatments of the impression copings showed more accurate transfer than those with no treatment. Sandblasted and adhesive coated impression copings showed minimum amount of rotation followed by those with vertical slots and adhesive coated impression copings.

  11. Management of excessive movable tissue: a modified impression technique.

    Science.gov (United States)

    Shum, Michael H C; Pow, Edmond H N

    2014-08-01

    Excessive movable tissue is a challenge in complete denture prosthetics. A modified impression technique is presented with polyvinyl siloxane impression material and a custom tray with relief areas and perforations in the area of the excessive movable tissue. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

  12. The NIAID Division of AIDS enterprise information system: integrated decision support for global clinical research programs

    Science.gov (United States)

    Gupta, Nitin; Varghese, Suresh; Virkar, Hemant

    2011-01-01

    The National Institute of Allergy and Infectious Diseases (NIAID) Division of AIDS (DAIDS) Enterprise Information System (DAIDS-ES) is a web-based system that supports NIAID in the scientific, strategic, and tactical management of its global clinical research programs for HIV/AIDS vaccines, prevention, and therapeutics. Different from most commercial clinical trials information systems, which are typically protocol-driven, the DAIDS-ES was built to exchange information with those types of systems and integrate it in ways that help scientific program directors lead the research effort and keep pace with the complex and ever-changing global HIV/AIDS pandemic. Whereas commercially available clinical trials support systems are not usually disease-focused, DAIDS-ES was specifically designed to capture and incorporate unique scientific, demographic, and logistical aspects of HIV/AIDS treatment, prevention, and vaccine research in order to provide a rich source of information to guide informed decision-making. Sharing data across its internal components and with external systems, using defined vocabularies, open standards and flexible interfaces, the DAIDS-ES enables NIAID, its global collaborators and stakeholders, access to timely, quality information about NIAID-supported clinical trials which is utilized to: (1) analyze the research portfolio, assess capacity, identify opportunities, and avoid redundancies; (2) help support study safety, quality, ethics, and regulatory compliance; (3) conduct evidence-based policy analysis and business process re-engineering for improved efficiency. This report summarizes how the DAIDS-ES was conceptualized, how it differs from typical clinical trial support systems, the rationale for key design choices, and examples of how it is being used to advance the efficiency and effectiveness of NIAID's HIV/AIDS clinical research programs. PMID:21816958

  13. Analysis of the Involvement and Impressions of the Local Community on the Tourism Development of Ilocos Norte

    Directory of Open Access Journals (Sweden)

    Orpia Cherie B.

    2014-01-01

    Full Text Available Tourism development is not possible without the involvement of the local community in various development stage and tourism activities. They can be involved right from planning, construction, operation, and promotion activities. It generates investment, foreign exchange and employment to the locals. This study sought how the local community is involved and what are their impressions in Ilocos Norte’s Tourism developments. It also sought to determine the demographic qualities differentiates against tourism development involvement and their impressions. The study used non-probability convenience sampling in various towns in Ilocos Norte. Questionnaire type of survey and unstructured interviews were employed to the locals and to the local government units. Local residents perceive the tourism activities to provide employment opportunities, income, foreign exchange, and promote cultural heritage. Very few perceive to be a contributor to pollution and depletion of natural resources.. Most people have an impression that it has improved their way of life thru more access to their town, business opportunities, and more infrastructure. However, most of them has an impression that cleanliness and safety has gotten worse. Most people like to participate in tourism activities thru investment, employment and planning.

  14. Facial first impressions and partner preference models: Comparable or distinct underlying structures?

    Science.gov (United States)

    South Palomares, Jennifer K; Sutherland, Clare A M; Young, Andrew W

    2017-12-17

    Given the frequency of relationships nowadays initiated online, where impressions from face photographs may influence relationship initiation, it is important to understand how facial first impressions might be used in such contexts. We therefore examined the applicability of a leading model of verbally expressed partner preferences to impressions derived from real face images and investigated how the factor structure of first impressions based on potential partner preference-related traits might relate to a more general model of facial first impressions. Participants rated 1,000 everyday face photographs on 12 traits selected to represent (Fletcher, et al. 1999, Journal of Personality and Social Psychology, 76, 72) verbal model of partner preferences. Facial trait judgements showed an underlying structure that largely paralleled the tripartite structure of Fletcher et al.'s verbal preference model, regardless of either face gender or participant gender. Furthermore, there was close correspondence between the verbal partner preference model and a more general tripartite model of facial first impressions derived from a different literature (Sutherland et al., 2013, Cognition, 127, 105), suggesting an underlying correspondence between verbal conceptual models of romantic preferences and more general models of facial first impressions. © 2017 The British Psychological Society.

  15. Comparative evaluation of pressure generated on a simulated maxillary oral analog by impression materials in custom trays of different spacer designs: An in vitro study

    Directory of Open Access Journals (Sweden)

    Sakshi Chopra

    2016-01-01

    Full Text Available Introduction: Literature reveals that masticatory load on denture bearing tissues through complete dentures should be maximum on primary stress bearing areas and least on relief area in accordance with the histology of underlying tissues. A study to validate the existing beliefs was planned to compare the pressure on mucosa using selective pressure technique and minimal pressure technique, with the incorporation of two different impression materials utilizing the pressure sensors during secondary impression procedure. Materials and Methods: The study was performed using a maxillary analog. Three pressure sensors were imbedded in the oral analog, one in the mid palatine area and the other two in the right and left ridge crest. Custom trays of two different configurations were fabricated. The two impression materials tested were light body and zinc oxide eugenol. A total of 40 impressions were made. A constant weight of 1 kg was placed, and the pressure was recorded as initial and end pressures. Results: A significant difference in the pressure produced using different impression materials was found (P < 0.001. Light body vinyl polysiloxane produced significantly lesser pressure than zinc oxide eugenol impression materials. The presence of relief did affect the magnitude of pressure at various locations. Conclusion: All impression materials produced pressure during maxillary edentulous impression making. Tray modification is an important factor in changing the amount of pressure produced. The impression materials used also had a significant role to play on the pressures acting on the tissues during impression procedure. Clinical Implication: Light body VPS impression material may be recommended to achieve minimal pressure on the denture bearing tissues in both selective as well as minimal pressure techniques.

  16. Progressive learning in endoscopy simulation training improves clinical performance: a blinded randomized trial.

    Science.gov (United States)

    Grover, Samir C; Scaffidi, Michael A; Khan, Rishad; Garg, Ankit; Al-Mazroui, Ahmed; Alomani, Tareq; Yu, Jeffrey J; Plener, Ian S; Al-Awamy, Mohamed; Yong, Elaine L; Cino, Maria; Ravindran, Nikila C; Zasowski, Mark; Grantcharov, Teodor P; Walsh, Catharine M

    2017-11-01

    A structured comprehensive curriculum (SCC) that uses simulation-based training (SBT) can improve clinical colonoscopy performance. This curriculum may be enhanced through the application of progressive learning, a training strategy centered on incrementally challenging learners. We aimed to determine whether a progressive learning-based curriculum (PLC) would lead to superior clinical performance compared with an SCC. This was a single-blinded randomized controlled trial conducted at a single academic center. Thirty-seven novice endoscopists were recruited and randomized to either a PLC (n = 18) or to an SCC (n = 19). The PLC comprised 6 hours of SBT, which progressed in complexity and difficulty. The SCC included 6 hours of SBT, with cases of random order of difficulty. Both groups received expert feedback and 4 hours of didactic teaching. Participants were assessed at baseline, immediately after training, and 4 to 6 weeks after training. The primary outcome was participants' performance during their first 2 clinical colonoscopies, as assessed by using the Joint Advisory Group Direct Observation of Procedural Skills assessment tool (JAG DOPS). Secondary outcomes were differences in endoscopic knowledge, technical and communication skills, and global performance in the simulated setting. The PLC group outperformed the SCC group during first and second clinical colonoscopies, measured by JAG DOPS (P PLC group had superior technical and communication skills and global performance in the simulated setting (P  .05). Our findings demonstrate the superiority of a PLC for endoscopic simulation, compared with an SCC. Challenging trainees progressively is a simple, theory-based approach to simulation whereby the performance of clinical colonoscopies can be improved. (Clinical trial registration number: NCT02000180.). Copyright © 2017 American Society for Gastrointestinal Endoscopy. Published by Elsevier Inc. All rights reserved.

  17. Effect of Polyvinyl Siloxane Viscosity on Accuracy of Dental Implant Impressions

    OpenAIRE

    Ghahremanloo, Ahmad; Seifi, Mahdieh; Ghanbarzade, Jalil; Abrisham, Seyyed Mohammad; Javan, Rashid Abdolah

    2017-01-01

    Objectives: The aim of this study was to compare the accuracy of dental implant impressions obtained by a combination of different impression techniques and viscosities of polyvinyl siloxane (PVS).Materials and Methods: Four parallel fixtures were placed between mental foramina in a master model of lower dental arch. Three different viscosities (putty/light body, medium body/light body, and monophase: heavy body) and direct and indirect techniques (six groups) were used, and seven impressions...

  18. Effects of Inconsistent Behaviors on Person Impressions: A Multidimensional Study.

    Science.gov (United States)

    Vonk, Roos

    1995-01-01

    Examined effects of unexpected behavioral information on person impressions. Inconsistency was manipulated with respect to Implicit Personality Theory. Found that behaviors with inconsistent evaluation implications did not affect impressions and that effects of inconsistent information depended on dimension of contrast, valence of initial…

  19. 21 CFR 872.3661 - Optical Impression Systems for CAD/CAM.

    Science.gov (United States)

    2010-04-01

    ... of sensor and a computer with software. (b) Classification. Class II (Special Controls). The device... entitled “Class II Special Controls Guidance Document: Optical Impression Systems for Computer Assisted.../CAM. (a) Identification. An optical impression system for computer assisted design and manufacturing...

  20. Accuracy of different impression materials in parallel and nonparallel implants

    Directory of Open Access Journals (Sweden)

    Mahroo Vojdani

    2015-01-01

    Conclusion: Within the limitations of this study, in parallel conditions, the type of impression material cannot affect the accuracy of the implant impressions; however, in nonparallel conditions, polyvinyl siloxane is shown to be a better choice, followed by vinyl siloxanether and polyether respectively.

  1. Three-dimensional accuracy of plastic transfer impression copings for three implant systems.

    Science.gov (United States)

    Teo, Juin Wei; Tan, Keson B; Nicholls, Jack I; Wong, Keng Mun; Uy, Joanne

    2014-01-01

    The purpose of this study was to compare the three-dimensional accuracy of indirect plastic impression copings and direct implant-level impression copings from three implant systems (Nobel Biocare [NB], Biomet 3i [3i], and Straumann [STR]) at three interimplant buccolingual angulations (0, 8, and 15 degrees). Two-implant master models were used to simulate a three-unit implant fixed partial denture. Test models were made from Impregum impressions using direct implant-level impression copings (DR). Abutments were then connected to the master models for impressions using the plastic impression copings (INDR) at three different angulations for a total of 18 test groups (n = 5 in each group). A coordinate measuring machine was used to measure linear distortions, three-dimensional (3D) distortions, angular distortions, and absolute angular distortions between the master and test models. Three-way analysis of variance showed that the implant system had a significant effect on 3D distortions and absolute angular distortions in the x- and y-axes. Interimplant angulation had a significant effect on 3D distortions and absolute angular distortions in the y-axis. Impression technique had a significant effect on absolute angular distortions in the y-axis. With DR, the NB and 3i systems were not significantly different. With INDR, 3i appeared to have less distortion than the other systems. Interimplant angulations did not significantly affect the accuracy of NBDR, 3iINDR, and STRINDR. The accuracy of INDR and DR was comparable at all interimplant angulations for 3i and STR. For NB, INDR was comparable to DR at 0 and 8 degrees but was less accurate at 15 degrees. Three-dimensional accuracy of implant impressions varied with implant system, interimplant angulation, and impression technique.

  2. Individual Differences and Rating Errors in First Impressions of Psychopathy

    Directory of Open Access Journals (Sweden)

    Christopher T. A. Gillen

    2016-10-01

    Full Text Available The current study is the first to investigate whether individual differences in personality are related to improved first impression accuracy when appraising psychopathy in female offenders from thin-slices of information. The study also investigated the types of errors laypeople make when forming these judgments. Sixty-seven undergraduates assessed 22 offenders on their level of psychopathy, violence, likability, and attractiveness. Psychopathy rating accuracy improved as rater extroversion-sociability and agreeableness increased and when neuroticism and lifestyle and antisocial characteristics decreased. These results suggest that traits associated with nonverbal rating accuracy or social functioning may be important in threat detection. Raters also made errors consistent with error management theory, suggesting that laypeople overappraise danger when rating psychopathy.

  3. Digital versus conventional impressions for fixed prosthodontics: A systematic review and meta-analysis.

    Science.gov (United States)

    Chochlidakis, Konstantinos M; Papaspyridakos, Panos; Geminiani, Alessandro; Chen, Chun-Jung; Feng, I Jung; Ercoli, Carlo

    2016-08-01

    Limited evidence is available for the marginal and internal fit of fixed dental restorations fabricated with digital impressions compared with those fabricated with conventional impressions. The purpose of this systematic review was to compare marginal and internal fit of fixed dental restorations fabricated with digital techniques to those fabricated using conventional impression techniques and to determine the effect of different variables on the accuracy of fit. Medline, Cochrane, and EMBASE databases were electronically searched and enriched by hand searches. Studies evaluating the fit of fixed dental restorations fabricated with digital and conventional impression techniques were identified. Pooled data were statistically analyzed, and factors affecting the accuracy of fit were identified, and their impact on accuracy of fit outcomes were assessed. Dental restorations fabricated with digital impression techniques exhibited similar marginal misfit to those fabricated with conventional impression techniques (P>.05). Both marginal and internal discrepancies were greater for stone die casts, whereas digital dies produced restorations with the smallest discrepancies (Pdigital impression was used to generate stereolithographic (SLA)/polyurethane dies, misfit values were intermediate. The fabrication technique, the type of restoration, and the impression material had no effect on misfit values (P>.05), whereas die and restoration materials were statistically associated (Pdigital impression technique provided better marginal and internal fit of fixed restorations than conventional techniques did. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

  4. Accuracy of different abutment level impression techniques in All-On-4 dental implants

    Directory of Open Access Journals (Sweden)

    Marzieh Alikhasi

    2012-01-01

    Full Text Available Background and Aims: Passive fit of prosthetic frameworks is a major concern in implant dentistry. Impression technique is one of the several variables that may affect the outcome of dental implants. The purpose of this study was to compare the three dimensional accuracy of direct and indirect abutment level implant impressions ofALL-ON-4 treatment plan.Materials and Methods: A reference acrylic resin model with four Branemark fixtures was made according to All-On-4 treatment plan. Multiunit abutments were screwed into the fixtures and two special trays were made for direct and indirect impression techniques. Ten direct and ten indirect impression techniques with respective impression transfers were made. Impressions were poured with stone and the positional accuracy of the abutment analogues in each dimension of x, y, and z axes and also angular displacement (Δθ were evaluated using a Coordinate Measuring Machine (CMM. Data were analyzed using T- test.Results: The results showed that direct impression technique was significantly more accurate than indirect technique (P<0.001.Conclusion: The results showed that the accuracy of direct impression technique was significantly more than that of indirect technique in Δθ and Δr coordinate and also Δx, Δy, Δz.

  5. The Clinical Research Office of the Endourological Society Percutaneous Nephrolithotomy Global Study

    DEFF Research Database (Denmark)

    Bucuras, Viorel; Gopalakrishnam, Ganesh; Wolf, J Stuart

    2012-01-01

    The study compared characteristics and outcomes in patients with solitary and bilateral kidneys who were treated with percutaneous nephrolithotomy (PCNL) in the Clinical Research Office of the Endourological Society (CROES) PCNL Global Study.......The study compared characteristics and outcomes in patients with solitary and bilateral kidneys who were treated with percutaneous nephrolithotomy (PCNL) in the Clinical Research Office of the Endourological Society (CROES) PCNL Global Study....

  6. The discrepancy between patients and informants on clinician-rated measures in major depressive disorder: implications for clinical trials and clinical practice.

    Science.gov (United States)

    Peselow, Eric D; Karamians, Reneh; Lord, Marie; Tobia, Gabriel; IsHak, Waguih William

    2014-03-01

    Clinician-rated measures are used in clinical trials and measurement-based clinical care settings to assess baseline symptoms and treatment outcomes of major depressive disorder (MDD), with a widely held dictum that they are sufficient in assessing the patient's clinical status. In this study, we examined clinician-rated measures of depressive and global symptom severity, obtained by interviewing patients as well as informants in an attempt to examine the potential difference or similarity between these two sources of information. The sample consisted of 89 treatment seeking, DSM-IV diagnosed MDD outpatients treated between 1995 and 2004. The clinician-rated measures used included the Montgomery Åsberg Depression Rating Scale (MADRS), and the Clinical Global Impression Scale (CGI) for Severity. The scores of the clinician-rated measures collected from patients' interviews were compared with those collected from informants' interviews. Clinician-rated scores, collected by interviewing patients, were significantly higher and indicative of greater symptom severity when compared with those collected by interviewing informants. This was true for both the MADRS before (Ppractical in MDD clinical trials or everyday clinical care. The discrepancies observed between the clinician-rated scores obtained from patients and informants emphasize the importance of incorporating collateral information during the assessment and rating of depressive symptom severity in both clinical trials as well as in clinical practice.

  7. In vivo precision of conventional and digital methods of obtaining complete-arch dental impressions.

    Science.gov (United States)

    Ender, Andreas; Attin, Thomas; Mehl, Albert

    2016-03-01

    Digital impression systems have undergone significant development in recent years, but few studies have investigated the accuracy of the technique in vivo, particularly compared with conventional impression techniques. The purpose of this in vivo study was to investigate the precision of conventional and digital methods for complete-arch impressions. Complete-arch impressions were obtained using 5 conventional (polyether, POE; vinylsiloxanether, VSE; direct scannable vinylsiloxanether, VSES; digitized scannable vinylsiloxanether, VSES-D; and irreversible hydrocolloid, ALG) and 7 digital (CEREC Bluecam, CER; CEREC Omnicam, OC; Cadent iTero, ITE; Lava COS, LAV; Lava True Definition Scanner, T-Def; 3Shape Trios, TRI; and 3Shape Trios Color, TRC) techniques. Impressions were made 3 times each in 5 participants (N=15). The impressions were then compared within and between the test groups. The cast surfaces were measured point-to-point using the signed nearest neighbor method. Precision was calculated from the (90%-10%)/2 percentile value. The precision ranged from 12.3 μm (VSE) to 167.2 μm (ALG), with the highest precision in the VSE and VSES groups. The deviation pattern varied distinctly according to the impression method. Conventional impressions showed the highest accuracy across the complete dental arch in all groups, except for the ALG group. Conventional and digital impression methods differ significantly in the complete-arch accuracy. Digital impression systems had higher local deviations within the complete arch cast; however, they achieve equal and higher precision than some conventional impression materials. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

  8. At face value: Visual antecedents of impression formation in servicescapes

    NARCIS (Netherlands)

    Verhoeven, J.W.M.; van Rompay, Thomas Johannes Lucas; Pruyn, Adriaan T.H.; Mc.Gill, Ann L.; Shavitt, Sharon

    2009-01-01

    Consumers may base employee impressions on physical appearance and displayed personal objects. In a scenario experiment, using photos of a physician and a 360-degree panorama of his consultation room, we examined the effects of appearance and tangibles on impression formation. Study 1 shows that

  9. Strategies for managing impressions of racial identity in the workplace.

    Science.gov (United States)

    Roberts, Laura Morgan; Cha, Sandra E; Kim, Sung Soo

    2014-10-01

    This article deepens understanding of the workplace experiences of racial minorities by investigating racial identity-based impression management (RIM) by Asian American journalists. Racial centrality, directly or indirectly, predicted the use of 4 RIM strategies (avoidance, enhancement, affiliation, and racial humor). Professional centrality also predicted strategy use, which was related to life satisfaction and perceived career success. By shedding light on proactive strategies that individuals use to influence colleagues' impressions of their racial identity, we contribute to research on diversity in organizations, impression management, and racial identity. (PsycINFO Database Record (c) 2014 APA, all rights reserved).

  10. Accuracy and reproducibility of virtual edentulous casts created by laboratory impression scan protocols.

    Science.gov (United States)

    Peng, Lingyan; Chen, Li; Harris, Bryan T; Bhandari, Bikash; Morton, Dean; Lin, Wei-Shao

    2018-04-24

    Although computer-aided design and computer-aided manufacturing (CAD-CAM) complete removable dental prostheses (CRDPs) have gained popularity, conventional impressions are still common for CAD-CAM CRDP treatment. These need to be digitized and converted into virtual edentulous casts with a laboratory impression scan protocol during prosthesis fabrication. How this can best be accomplished is unclear. The purpose of this in vitro study was to compare the accuracy and reproducibility of virtual edentulous casts created by a dental laboratory laser scanner and a cone-beam computed tomography (CBCT) scanner with a digitized master cast. A master cast was digitized as the virtual reference cast. Ten polyvinyl siloxane impressions were made on the master cast and scanned with the dental laboratory laser scanner and CBCT scanner. The impressions were sprayed with antiglare spray and rescanned. Four groups of virtual study casts (N=40) were created from the impression scans. All virtual study casts and the reference cast were registered with surface-matching software, and the root mean square (RMS) values (representation of overall accuracy) and percentage of measurement data points within 1 standard deviation (SD) of mean RMS values (%, representation of overall reproducibility) among the 4 study groups were measured. Additionally, 95 numeric distance differences (representation of accuracy at each region) were measured in 5 distinct regions: the apex of the denture border, 6 mm from denture border, crest of the ridge, palate, and posterior palatal seal. The repeated-measures ANOVA and post hoc test (t grouping) were used to determine statistical differences (α=.05). The laboratory scanner group had a significantly larger RMS value (4.0 ±0.3 μm, Pvirtual edentulous casts, and the antiglare spray only significantly improved the accuracy and reproducibility of virtual edentulous casts created by the dental laboratory laser scanner. The accuracy of the virtual edentulous

  11. A Comparison of implant impression precision: Different materials and techniques

    Science.gov (United States)

    Tabesh, Mahtab; Alikhasi, Marzieh

    2018-01-01

    Background Precision of implant impressions is a prerequisite for long-term success of implant supported prostheses. Impression materials and impression techniques are two important factors that impression precision relies on. Material and Methods A model of edentulous maxilla containing four implants inserted by All-on-4 guide was constructed. Seventy two impressions using polyether (PE), polyvinyl siloxane (PVS), and vinyl siloxanether (VSE) materials with direct and indirect techniques were made (n=12). Coordinates of implants in casts were measured using coordinate measuring machine (CMM). Data were analyzed with ANOVA; t-test and Tukey test were used for post hoc. Results With two-way ANOVA, mean values of linear displacements of implants were significantly different among materials and techniques. One-way ANOVA and Tukey showed significant difference between PE and VSE (P=0.019), PE and PVS (P=0.002) in direct technique, and between PVS and PE (Pimpression of implants, PE is recommended for direct technique while PE and VSE are recommended for indirect technique. Recommended technique for VSE is either direct or indirect; and for PE and PVS is direct. Key words:Polyvinyl siloxane, polyether, vinyl siloxanether, direct technique, indirect technique, All-on-4, coordinate measuring machine. PMID:29670733

  12. Dinosaur Impressions

    Science.gov (United States)

    Taquet, Philippe

    1998-09-01

    Perhaps you are a paleontologist or have always wondered what it is like to be one. Or you are fascinated by fossils and like to read about the origins and natural history of dinosaurs. Or maybe you are an avid traveler and reader of travelogues. If you are any of these things, then this book is for you. Originally published in 1994 in French, Dinosaur Impressions is the engaging account of thirty years of travel and paleontological exploration by Philippe Taquet, one of the world's most noted paleontologists. Dr. Taquet takes the reader on a surprisingly far-flung tour ranging from the Provence countryside to the Niger desert, from the Brazilian bush to the Mongolian Steppes, and from the Laos jungle to the Moroccan mountains in search of dinosaur bones and what they have to tell us about a vanished world. With wry humor and lively anecdotes, Dr. Taquet retraces the history of paleontological research, along the way discussing the latest theories of dinosaur existence and extinction. Elegantly translated by Kevin Padian, Dinosaur Impressions provides a unique, thoughtful perspective not often encountered in American- and English-language works. This insightful, first-hand account of an exceptional career is also a travelogue par excellence that will enthrall enthusiasts and general readers alike. Philippe Taquet is the Director of the National Museum of Natural History in Paris and is a member of the French Academy of Sciences. Kevin Padian is a professor in the Department of Integrative Biology and Curator of the Museum of Paleontology at the University of California, Berkeley. He is also the editor of The Beginning of the Age of Dinosaurs (Cambridge, 1986) and The Encyclopedia of Dinosaurs (1997).

  13. Global health training and international clinical rotations during residency: current status, needs, and opportunities.

    Science.gov (United States)

    Drain, Paul K; Holmes, King K; Skeff, Kelley M; Hall, Thomas L; Gardner, Pierce

    2009-03-01

    Increasing international travel and migration have contributed to globalization of diseases. Physicians today must understand the global burden and epidemiology of diseases, the disparities and inequities in global health systems, and the importance of cross-cultural sensitivity. To meet these needs, resident physicians across all specialties have expressed growing interest in global health training and international clinical rotations. More residents are acquiring international experience, despite inadequate guidance and support from most accreditation organizations and residency programs. Surveys of global health training, including international clinical rotations, highlight the benefits of global health training as well as the need for a more coordinated approach. In particular, international rotations broaden a resident's medical knowledge, reinforce physical examination skills, and encourage practicing medicine among underserved and multicultural populations. As residents recognize these personal and professional benefits, a strong majority of them seek to gain international clinical experience. In conclusion, with feasible and appropriate administrative steps, all residents can receive global health training and be afforded the accreditation and programmatic support to participate in safe international rotations. The next steps should address accreditation for international rotations and allowance for training away from continuity clinics by residency accreditation bodies, and stipend and travel support for six or more weeks of call-free elective time from residency programs.

  14. Integrating utilization-focused evaluation with business process modeling for clinical research improvement.

    Science.gov (United States)

    Kagan, Jonathan M; Rosas, Scott; Trochim, William M K

    2010-10-01

    New discoveries in basic science are creating extraordinary opportunities to design novel biomedical preventions and therapeutics for human disease. But the clinical evaluation of these new interventions is, in many instances, being hindered by a variety of legal, regulatory, policy and operational factors, few of which enhance research quality, the safety of study participants or research ethics. With the goal of helping increase the efficiency and effectiveness of clinical research, we have examined how the integration of utilization-focused evaluation with elements of business process modeling can reveal opportunities for systematic improvements in clinical research. Using data from the NIH global HIV/AIDS clinical trials networks, we analyzed the absolute and relative times required to traverse defined phases associated with specific activities within the clinical protocol lifecycle. Using simple median duration and Kaplan-Meyer survival analysis, we show how such time-based analyses can provide a rationale for the prioritization of research process analysis and re-engineering, as well as a means for statistically assessing the impact of policy modifications, resource utilization, re-engineered processes and best practices. Successfully applied, this approach can help researchers be more efficient in capitalizing on new science to speed the development of improved interventions for human disease.

  15. SRIM Scheme: An Impression-Management Scheme for Privacy-Aware Photo-Sharing Users

    Directory of Open Access Journals (Sweden)

    Fenghua Li

    2018-02-01

    Full Text Available With the development of online social networks (OSNs and modern smartphones, sharing photos with friends has become one of the most popular social activities. Since people usually prefer to give others a positive impression, impression management during photo sharing is becoming increasingly important. However, most of the existing privacy-aware solutions have two main drawbacks: ① Users must decide manually whether to share each photo with others or not, in order to build the desired impression; and ② users run a high risk of leaking sensitive relational information in group photos during photo sharing, such as their position as part of a couple, or their sexual identity. In this paper, we propose a social relation impression-management (SRIM scheme to protect relational privacy and to automatically recommend an appropriate photo-sharing policy to users. To be more specific, we have designed a lightweight face-distance measurement that calculates the distances between users’ faces within group photos by relying on photo metadata and face-detection results. These distances are then transformed into relations using proxemics. Furthermore, we propose a relation impression evaluation algorithm to evaluate and manage relational impressions. We developed a prototype and employed 21 volunteers to verify the functionalities of the SRIM scheme. The evaluation results show the effectiveness and efficiency of our proposed scheme. Keywords: Impression management, Relational privacy, Photo sharing, Policy recommendation, Proxemics

  16. Effect of different impression materials and techniques on the dimensional accuracy of implant definitive casts.

    Science.gov (United States)

    Ebadian, Behnaz; Rismanchian, Mansor; Dastgheib, Badrosadat; Bajoghli, Farshad

    2015-01-01

    Different factors such as impression techniques and materials can affect the passive fit between the superstructure and implant. The aim of this study was to determine the effect of different impression materials and techniques on the dimensional accuracy of implant definitive casts. Four internal hex implants (Biohorizons Ø4 mm) were placed on a metal maxillary model perpendicular to the horizontal plane in maxillary lateral incisors, right canine and left first premolar areas. Three impression techniques including open tray, closed tray using ball top screw abutments and closed tray using short impression copings and two impression materials (polyether and polyvinyl siloxane) were evaluated (n = 60). The changes in distances between implant analogues in mediolateral (x) and anteroposterior (y) directions and analogue angles in x/z and y/z directions in the horizontal plane on the definitive casts were measured by coordinate measuring machine. The data were analyzed by multivariate two-way analysis of variance and one sample t-test (α = 0.05). No statistical significant differences were observed between different impression techniques and materials. However, deviation and distortion of definitive casts had a significant difference with the master model when short impression copings and polyvinyl siloxane impression material were used (P impression materials (P impression techniques; however, less distortion and deviation were observed in the open tray technique. In the closed tray impression technique, ball top screw was more accurate than short impression copings.

  17. Estimating the global clinical burden of Plasmodium falciparum malaria in 2007.

    Directory of Open Access Journals (Sweden)

    Simon I Hay

    2010-06-01

    Full Text Available The epidemiology of malaria makes surveillance-based methods of estimating its disease burden problematic. Cartographic approaches have provided alternative malaria burden estimates, but there remains widespread misunderstanding about their derivation and fidelity. The aims of this study are to present a new cartographic technique and its application for deriving global clinical burden estimates of Plasmodium falciparum malaria for 2007, and to compare these estimates and their likely precision with those derived under existing surveillance-based approaches.In seven of the 87 countries endemic for P. falciparum malaria, the health reporting infrastructure was deemed sufficiently rigorous for case reports to be used verbatim. In the remaining countries, the mapped extent of unstable and stable P. falciparum malaria transmission was first determined. Estimates of the plausible incidence range of clinical cases were then calculated within the spatial limits of unstable transmission. A modelled relationship between clinical incidence and prevalence was used, together with new maps of P. falciparum malaria endemicity, to estimate incidence in areas of stable transmission, and geostatistical joint simulation was used to quantify uncertainty in these estimates at national, regional, and global scales. Combining these estimates for all areas of transmission risk resulted in 451 million (95% credible interval 349-552 million clinical cases of P. falciparum malaria in 2007. Almost all of this burden of morbidity occurred in areas of stable transmission. More than half of all estimated P. falciparum clinical cases and associated uncertainty occurred in India, Nigeria, the Democratic Republic of the Congo (DRC, and Myanmar (Burma, where 1.405 billion people are at risk. Recent surveillance-based methods of burden estimation were then reviewed and discrepancies in national estimates explored. When these cartographically derived national estimates were ranked

  18. Microbiological evaluation of ultrasonic nebulization for disinfecting dental impressions.

    Science.gov (United States)

    Mendonca, Marcio Jose; Rafael, Renata Santos; Camilotti, Veridiana; Menolli, Rafael Andrade; Sicoli, Eliseu Augusto; Teixeira, Nancielli; Sinhoreti, Mario Alexandre Coelho

    2013-07-01

    Disinfecting dental impressions is necessary to decrease the risk of cross-contamination in dental offices. Ultrasonic nebulization has been mentioned as a microbicidal technique that can be used to disinfect contaminated dental impressions. This study compared the microbicidal effect of 2% glutaraldehyde and 0.2% peracetic acid for the disinfection of dental impressions made with vinyl polysiloxane, using 2 disinfection methods: immersion and ultrasonic nebulization. Bactericial efficacy was examined using Staphylococcus aureus and Bacillus atrophaeus as indicators. Thirty impressions were obtained and distributed randomly in 5 groups (n = 6). Group 1 was immersed in 2% glutaraldehyde immersion for 10 minutes, Group 2 was immersed in 0.2% peracetic acid for 10 minutes, Group 3 underwent ultrasonic nebulization for 10 minutes in 2% glutaraldehyde solution, Group 4 underwent ultrasonic nebulization for 10 minutes in 0.2% peracetic acid solution, and Group 5 was a control group that received no disinfectant. Both solutions experienced a 100% reduction in microorganisms following ultrasonic nebulization, as did peracetic acid following immersion; however, immersion in glutaraldehyde demonstrated lower values of reduction in B atrophaeus group, with a statistically significant difference compared with the other experimental groups.

  19. Does aging impair first impression accuracy? Differentiating emotion recognition from complex social inferences.

    Science.gov (United States)

    Krendl, Anne C; Rule, Nicholas O; Ambady, Nalini

    2014-09-01

    Young adults can be surprisingly accurate at making inferences about people from their faces. Although these first impressions have important consequences for both the perceiver and the target, it remains an open question whether first impression accuracy is preserved with age. Specifically, could age differences in impressions toward others stem from age-related deficits in accurately detecting complex social cues? Research on aging and impression formation suggests that young and older adults show relative consensus in their first impressions, but it is unknown whether they differ in accuracy. It has been widely shown that aging disrupts emotion recognition accuracy, and that these impairments may predict deficits in other social judgments, such as detecting deceit. However, it is unclear whether general impression formation accuracy (e.g., emotion recognition accuracy, detecting complex social cues) relies on similar or distinct mechanisms. It is important to examine this question to evaluate how, if at all, aging might affect overall accuracy. Here, we examined whether aging impaired first impression accuracy in predicting real-world outcomes and categorizing social group membership. Specifically, we studied whether emotion recognition accuracy and age-related cognitive decline (which has been implicated in exacerbating deficits in emotion recognition) predict first impression accuracy. Our results revealed that emotion recognition accuracy did not predict first impression accuracy, nor did age-related cognitive decline impair it. These findings suggest that domains of social perception outside of emotion recognition may rely on mechanisms that are relatively unimpaired by aging. PsycINFO Database Record (c) 2014 APA, all rights reserved.

  20. Turn Management or Impression Management?

    NARCIS (Netherlands)

    ter Maat, Mark; Heylen, Dirk K.J.; Ruttkay, Z.M.; Kipp, M.; Nijholt, Antinus; Vilhjálmsson, H.H.

    2009-01-01

    We look at how some basic choices in the management of turns influence the impression that people get from an agent. We look at scales concerning personality, emotion and interpersonal stance. We do this by a person perception study, or rather an agent perception study, using simulated conversations

  1. Selling oneself: construct and criterion-related validity of impression management in structured interviews

    NARCIS (Netherlands)

    Kleinmann, M.; Klehe, U.-C.

    2010-01-01

    Interviewee impression management has been a long-standing concern in the interview literature. Yet recent insights into the impact of impression management on interviewee performance in structured interviews suggest that interviewee impression management may be more than just a source of bias and a

  2. Effect of Time on Gypsum-Impression Material Compatibility

    Science.gov (United States)

    Won, John Boram

    The purpose of this study was to evaluate the compatibility of dental gypsum with three recently introduced irreversible hydrocolloid (alginate) alternatives. The test materials were Alginot® (Kerr™), Position Penta Quick® (3M ESPE™) and Silgimix ® (Sultan Dental™). The irreversible hydrocolloid impression material, Jeltrate Plus antimicrobial® (Dentsply Caulk™) served as the control. Materials and Methods: Testing of materials was conducted in accordance with ANSI/ADA Specification No. 18 for Alginate Impression Materials. Statistical Analysis: The 3-Way ANOVA test was used to analyze measurements between different time points at a significance level of (p Outcome: It was found that there was greater compatibility between gypsum and the alternative materials over time than the traditional irreversible hydrocolloid material that was tested. A statistically significant amount of surface change/incompatibility was found over time with the combination of the dental gypsum products and the control impression material (Jeltrate Plus antimicrobial®).

  3. Observing and Understanding Children's Social Interactions. An Impression Management Perspective.

    Science.gov (United States)

    Hatch, J. Amos

    1994-01-01

    Describes ways of observing and interpreting children's peer social behavior based on the impression management perspective, which focuses on the social construction of a child's individual self-concept. Suggests that teachers and caregivers can use impression management strategies to observe and promote prosocial development in young children.…

  4. Impression Management by Association: Construction and Validation of a Scale.

    Science.gov (United States)

    Andrews, Martha C.; Kacmar, K. Michele

    2001-01-01

    Impression management (managing associations with others to create a favorable impression) using such tactics as boasting, blurring, blaring, and burying was examined using factor and validity analyses of data from the Image Management by Association Scale. The scale satisfactorily represented the four tactics, although burying and blaring needed…

  5. Digital impressions for fabrication of definitive "all-on-four" restorations.

    Science.gov (United States)

    Gherlone, Enrico Felice; Ferrini, Francesco; Crespi, Roberto; Gastaldi, Giorgio; Capparé, Paolo

    2015-02-01

    The aim of this study was to assess the accuracy of digital impressions for "all-on-four" implant rehabilitation. Patients edentulous in one or both jaws were randomly selected for this study. Complete arch immediately loaded prostheses supported by 4 implants (2 axial and 2 tilted) were placed. Five hours after implant placement, screw-retained full-arch temporary prostheses were positioned. After 4 months, a digital scan body was used to finalize definitive prosthesis. Radiographic assessments were obtained immediately after surgery and at each follow-up visit. Bone level measurements were reported at 6 and 12 months, and bone loss between upright and tilted implants was compared. Fourteen definitive cast metal frameworks prosthesis were delivered to the patients. No implant dropout occurred. All prosthesis were screwed onto the dental implants, and x-ray examinations revealed a bar-implant connection accuracy. The implant survival rate was 100% for all positioned implants. No statistically significant differences (P > 0.05) in crestal bone loss between tilted and upright implants were detected. Digital impression creates an accurate physical model significantly improving efficiencies for the dental team and streamlining the workflow.

  6. Evaluation of digital model accuracy and time-dependent deformation of alginate impressions.

    Science.gov (United States)

    Cesur, M G; Omurlu, I K; Ozer, T

    2017-09-01

    The aim of this study was to evaluate the accuracy of digital models produced with the three-dimensional dental scanner, and to test the dimensional stability of alginate impressions for durations of immediately (T0), 1 day (T1), and 2 days (T2). A total of sixty impressions were taken from a master model with an alginate, and were poured into plaster models in three different storage periods. Twenty impressions were directly scanned (negative digital models), after which plaster models were poured and scanned (positive digital models) immediately. The remaining 40 impressions were poured after 1 and 2 days. In total, 9 points and 11 linear measurements were used to analyze the plaster models, and negative and positive digital models. Time-dependent deformation of the alginate impressions and the accuracy of the conventional plaster models and digital models were evaluated separately. Plaster models, negative and positive digital models showed significant differences in nearly all measurements at T (0), T (1), and T (2) times (P 0.05), but they demonstrated statistically significant differences at T (2) time (P impressions is practicable method for orthodontists.

  7. Effects of disinfection of combined agar/alginate impressions on the dimensional accuracy of stone casts.

    Science.gov (United States)

    Hiraguchi, Hisako; Nakagawa, Hisami; Kaketani, Masahiro; Hirose, Hideharu; Nishiyama, Minoru

    2007-05-01

    This study investigated the effects of disinfection of combined agar/alginate impressions on the dimensional accuracy of resultant stone casts. Impressions of a master cast designed to simulate an abutment tooth were prepared by combining each of two brands of cartridge-form agar impression materials with an alginate impression material. The impressions were immersed in 1% sodium hypochlorite for 10 minutes or 2% glutaraldehyde for 30 minutes. The remaining impressions were sprayed with these two disinfectants and then stored in sealed bags for 10, 30, 60, and 120 minutes. Stone casts obtained from the non-disinfected impressions were also prepared as control. Changes in diameter of the stone casts were then measured. Results indicated that storage for 10 minutes after spraying with 1% sodium hypochlorite was an appropriate disinfection method for combined agar/alginate impressions, as well as immersion in 1% sodium hypochlorite for 10 minutes.

  8. [An experimental study on the effect of different optical impression methods on marginal and internal fit of all-ceramic crowns].

    Science.gov (United States)

    Tan, Fa-Bing; Wang, Lu; Fu, Gang; Wu, Shu-Hong; Jin, Ping

    2010-02-01

    To study the effect of different optical impression methods in Cerec 3D/Inlab MC XL system on marginal and internal fit of all-ceramic crowns. A right mandibular first molar in the standard model was used to prepare full crown and replicated into thirty-two plaster casts. Sixteen of them were selected randomly for bonding crown and the others were used for taking optical impression, in half of which the direct optical impression taking method were used and the others were used for the indirect method, and then eight Cerec Blocs all-ceramic crowns were manufactured respectively. The fit of all-ceramic crowns were evaluated by modified United States Public Health Service (USPHS) criteria and scanning electron microscope (SEM) imaging, and the data were statistically analyzed with SAS 9.1 software. The clinically acceptable rate for all marginal measurement sites was 87.5% according to USPHS criteria. There was no statistically significant difference in marginal fit between direct and indirect method group (P > 0.05). With SEM imaging, all marginal measurement sites were less than 120 microm and no statistically significant difference was found between direct and indirect method group in terms of marginal or internal fit (P > 0.05). But the direct method group showed better fit than indirect method group in terms of mesial surface, lingual surface, buccal surface and occlusal surface (P impression method had no significant effect on marginal fit of Cerec Blocs crowns, but it had certain effect on internal fit. Overall all-ceramic crowns appeared to have clinically acceptable marginal fit.

  9. Laboratory and software applications for clinical trials: the global laboratory environment.

    Science.gov (United States)

    Briscoe, Chad

    2011-11-01

    The Applied Pharmaceutical Software Meeting is held annually. It is sponsored by The Boston Society, a not-for-profit organization that coordinates a series of meetings within the global pharmaceutical industry. The meeting generally focuses on laboratory applications, but in recent years has expanded to include some software applications for clinical trials. The 2011 meeting emphasized the global laboratory environment. Global clinical trials generate massive amounts of data in many locations that must be centralized and processed for efficient analysis. Thus, the meeting had a strong focus on establishing networks and systems for dealing with the computer infrastructure to support such environments. In addition to the globally installed laboratory information management system, electronic laboratory notebook and other traditional laboratory applications, cloud computing is quickly becoming the answer to provide efficient, inexpensive options for managing the large volumes of data and computing power, and thus it served as a central theme for the meeting.

  10. A comparative study of the accuracy between plastic and metal impression transfer copings for implant restorations.

    Science.gov (United States)

    Fernandez, Monica A; Paez de Mendoza, Carmen Y; Platt, Jeffrey A; Levon, John A; Hovijitra, Suteera T; Nimmo, Arthur

    2013-07-01

    A precise transfer of the position and orientation of the antirotational mechanism of an implant to the working cast is particularly important to achieve optimal fit of the final restoration. This study evaluated and compared the accuracy of metal and plastic impression copings for use in a full-arch mandibular edentulous simulation with four implants. Metal and plastic impression transfer copings for two implant systems, Nobel Biocare™ Replace and Straumann SynOcta®, were assessed on a laboratory model to simulate clinical practice. The accuracy of producing stone casts using these plastic and metal impression transfer copings was measured against a standard prosthetic framework consisting of a cast gold bar. A total of 20 casts from the four combinations were obtained. The fit of the framework on the cast was tested by a noncontact surface profilometer, the Proscan 3D 2000 A, using the one-screw test. The effects of implant/system and impression/coping material on gap measurements were analyzed using repeated measures ANOVA. The findings of this in vitro study were as follows: plastic copings demonstrated significantly larger average gaps than metal for Straumann (p = 0.001). Plastic and metal copings were not significantly different for Nobel (p = 0.302). Nobel had significantly larger average gaps than Straumann for metal copings (p = 0.003). Nobel had marginally smaller average gaps than Straumann (p = 0.096) for plastic copings. The system-by-screw location interaction was significant as well (p impression copings were more accurate than plastic copings when using the Straumann system, and there was no difference between metal and plastic copings for the Nobel Replace system. The system-by-screw location was not conclusive, showing no correlation within each system. © 2013 by the American College of Prosthodontists.

  11. Forming impressions: effects of facial expression and gender stereotypes.

    Science.gov (United States)

    Hack, Tay

    2014-04-01

    The present study of 138 participants explored how facial expressions and gender stereotypes influence impressions. It was predicted that images of smiling women would be evaluated more favorably on traits reflecting warmth, and that images of non-smiling men would be evaluated more favorably on traits reflecting competence. As predicted, smiling female faces were rated as more warm; however, contrary to prediction, perceived competence of male faces was not affected by facial expression. Participants' female stereotype endorsement was a significant predictor for evaluations of female faces; those who ascribed more strongly to traditional female stereotypes reported the most positive impressions of female faces displaying a smiling expression. However, a similar effect was not found for images of men; endorsement of traditional male stereotypes did not predict participants' impressions of male faces.

  12. Impression Management in Social Media: The Example of LinkedIn

    Directory of Open Access Journals (Sweden)

    Joanna Paliszkiewicz

    2016-09-01

    Full Text Available Nowadays, the relationships are often initiated and maintained in online environments, the formation and management of online impressions have gained importance and become the subject of numerous studies. The impression management is a conscious process in which people attempt to influence the perceptions of their image. They do it by controlling and managing information presented in social media. The presentation of identity is the key to success or failure for example in business life. In the article, the critical literature review related to impression management in social media is described. The example of the way of self-presentation in LinkedIn is presented. The future directions are indicated.

  13. Improved Global Ocean Color Using Polymer Algorithm

    Science.gov (United States)

    Steinmetz, Francois; Ramon, Didier; Deschamps, ierre-Yves; Stum, Jacques

    2010-12-01

    A global ocean color product has been developed based on the use of the POLYMER algorithm to correct atmospheric scattering and sun glint and to process the data to a Level 2 ocean color product. Thanks to the use of this algorithm, the coverage and accuracy of the MERIS ocean color product have been significantly improved when compared to the standard product, therefore increasing its usefulness for global ocean monitor- ing applications like GLOBCOLOUR. We will present the latest developments of the algorithm, its first application to MODIS data and its validation against in-situ data from the MERMAID database. Examples will be shown of global NRT chlorophyll maps produced by CLS with POLYMER for operational applications like fishing or oil and gas industry, as well as its use by Scripps for a NASA study of the Beaufort and Chukchi seas.

  14. Clinical Outcomes of Knee Osteoarthritis Treated With an Autologous Protein Solution Injection: A 1-Year Pilot Double-Blinded Randomized Controlled Trial.

    Science.gov (United States)

    Kon, Elizaveta; Engebretsen, Lars; Verdonk, Peter; Nehrer, Stefan; Filardo, Giuseppe

    2018-01-01

    Osteoarthritis (OA) is a debilitating disease resulting in substantial pain and functional limitations. A novel blood derivative has been developed to concentrate both growth factors and antagonists of inflammatory cytokines, with promising preliminary findings in terms of safety profile and clinical improvement. To investigate if one intra-articular injection of autologous protein solution (APS) can reduce pain and improve function in patients affected by knee OA in a multicenter, randomized, double-blind, saline-controlled study. Randomized controlled trial; Level of evidence, 2. Forty-six patients with unilateral knee OA (Kellgren-Lawrence 2 or 3) were randomized into the APS group (n = 31), which received a single ultrasound-guided injection of APS, and the saline (control) group (n = 15), which received a single saline injection. Patient-reported outcomes and adverse events were collected at 2 weeks and at 1, 3, 6, and 12 months through visual analog scale (VAS), Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), Knee injury and Osteoarthritis Outcome Score (KOOS), Short Form-36 (SF-36), Clinical Global Impression of Severity/Change (CGI-S/C), Patient Global Impression of Severity/Change (PGI-S/C), and Outcome Measures in Rheumatology-Osteoarthritis Research Society International (OMERACT-OARSI) responder rate. Imaging evaluation was also performed with radiograph and magnetic resonance imaging (MRI) before and after treatment (12 months and 3 and 12 months, respectively). The safety profile was positive, with no significant differences in frequency and severity of adverse events between groups. The improvement from baseline to 2 weeks and to 1, 3, and 6 months was similar between treatments. At 12 months, improvement in WOMAC pain score was 65% in the APS group and 41% in the saline group ( P = .02). There were no significant differences in VAS pain improvement between groups. At 12 months, APS group showed improved SF-36 Bodily Pain

  15. Drying time of tray adhesive for adequate tensile bond strength between polyvinylsiloxane impression and tray resin material.

    Science.gov (United States)

    Yi, Myong-Hee; Shim, Joon-Sung; Lee, Keun-Woo; Chung, Moon-Kyu

    2009-07-01

    Use of custom tray and tray adhesive is clinically recommended for elastomeric impression material. However there is not clear mention of drying time of tray adhesive in achieving appropriate bonding strength of tray material and impression material. This study is to investigate an appropriate drying time of tray adhesives by evaluating tensile bonding strength between two types of polyvinylsiloxane impression materials and resin tray, according to various drying time intervals of tray adhesives, and with different manufacturing company combination of impression material and tray adhesive. Adhesives used in this study were Silfix (Dentsply Caulk, Milford, Del, USA) and VPS Tray Adhesive (3M ESPE, Seefeld, Germany) and impression materials were Aquasil Ultra (monophase regular set, Dentsply Caulk, Milford, Del, USA) and Imprint II Garant (regular body, 3M ESPE, Seefeld, Germany). They were used combinations from the same manufacture and exchanged combinations of the two. The drying time was designed to air dry, 5 minutes, 10 minutes, 15 minutes, 20 minutes, and 25 minutes. Total 240 of test specimens were prepared by auto-polymerizing tray material (Instant Tray Mix, Lang, Wheeling, Il, USA) with 10 specimens in each group. The specimens were placed in the Universal Testing machine (Instron, model 3366, Instron Corp, University avenue, Nowood, MA, USA) to perform the tensile test (cross head speed 5 mm/min). The statistically efficient drying time was evaluated through ANOVA and Scheffe test. All the tests were performed at 95% confidence level. The results revealed that at least 10 minutes is needed for Silfix-Aquasil, and 15 minutes for VPS Tray Adhesive-Imprint II, to attain an appropriate tensile bonding strength. VPS Tray Adhesive-Imprint II had a superior tensile bonding strength when compared to Silfix-Aquasil over 15 minutes. Silfix-Aquasil had a superior bonding strength to VPS Tray Adhesive-Aquasil, and VPS Tray Adhesive-Imprint II had a superior tensile

  16. Accuracy of complete-arch dental impressions: a new method of measuring trueness and precision.

    Science.gov (United States)

    Ender, Andreas; Mehl, Albert

    2013-02-01

    A new approach to both 3-dimensional (3D) trueness and precision is necessary to assess the accuracy of intraoral digital impressions and compare them to conventionally acquired impressions. The purpose of this in vitro study was to evaluate whether a new reference scanner is capable of measuring conventional and digital intraoral complete-arch impressions for 3D accuracy. A steel reference dentate model was fabricated and measured with a reference scanner (digital reference model). Conventional impressions were made from the reference model, poured with Type IV dental stone, scanned with the reference scanner, and exported as digital models. Additionally, digital impressions of the reference model were made and the digital models were exported. Precision was measured by superimposing the digital models within each group. Superimposing the digital models on the digital reference model assessed the trueness of each impression method. Statistical significance was assessed with an independent sample t test (α=.05). The reference scanner delivered high accuracy over the entire dental arch with a precision of 1.6 ±0.6 µm and a trueness of 5.3 ±1.1 µm. Conventional impressions showed significantly higher precision (12.5 ±2.5 µm) and trueness values (20.4 ±2.2 µm) with small deviations in the second molar region (PDigital impressions were significantly less accurate with a precision of 32.4 ±9.6 µm and a trueness of 58.6 ±15.8µm (Pdigital models were visible across the entire dental arch. The new reference scanner is capable of measuring the precision and trueness of both digital and conventional complete-arch impressions. The digital impression is less accurate and shows a different pattern of deviation than the conventional impression. Copyright © 2013 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

  17. Appearing smart: the impression management of intelligence, person perception accuracy, and behavior in social interaction.

    Science.gov (United States)

    Murphy, Nora A

    2007-03-01

    Intelligence is an important trait that affects everyday social interaction. The present research utilized the ecological perspective of social perception to investigate the impression management of intelligence and strangers' evaluations of targets' intelligence levels. The ability to effectively portray an impression of intelligence to outside judges as well as interaction partners was appraised and the effect of impression management on the accurate judgment of intelligence was assessed. In addition, targets' behavior was studied in relation to impression management, perceived intelligence, and actual measured intelligence. Impression-managing targets appeared more intelligent to video judges but not to their interaction partner as compared to controls. The intelligence quotient (IQ) of impression-managing targets was more accurately judged than controls' IQ. Impression-managing targets displayed distinct nonverbal behavioral patterns that differed from controls. Looking while speaking was a key behavior: It significantly correlated with IQ, was successfully manipulated by impression-managing targets, and contributed to higher perceived intelligence ratings.

  18. Application of digital diagnostic impression, virtual planning, and computer-guided implant surgery for a CAD/CAM-fabricated, implant-supported fixed dental prosthesis: a clinical report.

    Science.gov (United States)

    Stapleton, Brandon M; Lin, Wei-Shao; Ntounis, Athanasios; Harris, Bryan T; Morton, Dean

    2014-09-01

    This clinical report demonstrated the use of an implant-supported fixed dental prosthesis fabricated with a contemporary digital approach. The digital diagnostic data acquisition was completed with a digital diagnostic impression with an intraoral scanner and cone-beam computed tomography with a prefabricated universal radiographic template to design a virtual prosthetically driven implant surgical plan. A surgical template fabricated with computer-aided design and computer-aided manufacturing (CAD/CAM) was used to perform computer-guided implant surgery. The definitive digital data were then used to design the definitive CAD/CAM-fabricated fixed dental prosthesis. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

  19. The sweet spot of clinical intuitions: Predictors of the effects of context on impressions of conduct disorder symptoms.

    Science.gov (United States)

    Marsh, Jessecae K; Burke, Christopher T; De Los Reyes, Andres

    2016-02-01

    How people interpret a mental disorder symptom has been shown to depend on the contextual life factors surrounding its presentation. Specifically, people are more likely to judge a symptom as clinically relevant if that symptom presents in a high-risk environment (e.g., child associates with deviant peers) relative to a low-risk environment (e.g., child associates with normative peer group). Importantly, not all symptoms are influenced by context to the same extent, and there is low agreement across people as to how this influence manifests. In this paper, we explore what factors predict the extent to which clinicians and laypeople interpret mental disorder symptoms as a function of diagnosis-congruent versus incongruent contextual information. We tested the impact of 2 statistical factors (prevalence and diagnosticity) and 2 more intuitive factors (diagnostic importance and abnormality) on the degree to which a symptom is interpreted differently in different contexts. Clinicians' impressions of the diagnosticity and importance of a symptom evidenced a curvilinear relationship with the use of context, with extremely important and unimportant as well as extremely diagnostic and nondiagnostic symptoms being less influenced by context. Laypeople showed a similar curvilinear relation between diagnosticity judgments and context effects. Additionally, clinicians showed a linear relationship between abnormality judgments and context use, with extremely abnormal symptoms being influenced less by context, whereas laypeople showed a curvilinear relationship between symptom abnormality and context use, with extremely abnormal and normal symptoms being influenced the most by context. We discuss implications of these findings for clinical diagnosis. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  20. Reducing job insecurity and increasing performance ratings: does impression management matter?

    Science.gov (United States)

    Huang, Guo-hua; Zhao, Helen Hailin; Niu, Xiong-ying; Ashford, Susan J; Lee, Cynthia

    2013-09-01

    Prior research on job insecurity has demonstrated its detrimental effects on both employees and the organization, yet no research has detailed how people actively deal with it. Drawing from proactivity research, this article argues that job insecurity prompts a proactive use of impression management tactics in the workplace. The effectiveness of these tactics depends on the level of supervisory liking for the employee and the attributions supervisors make regarding the employee's motives for the impression management behaviors (i.e., for the good of the organization or for self-interest). A 3-wave survey study of 271 Chinese employees and their supervisors showed that employees experiencing job insecurity in Time 1 reported using a variety of tactics to impress their supervisors at Time 2 and that these tactics curbed the affect associated with job insecurity and enhanced supervisor rated performance, through supervisor's liking and attributed motives. The relationship between impression management and increased supervisor-rated performance was moderated by supervisor attributions; the relationship between impression management and reduced affective job insecurity depended on supervisor liking. PsycINFO Database Record (c) 2013 APA, all rights reserved

  1. Children's Impressions of Television Families.

    Science.gov (United States)

    Wartella, Ellen

    This research study examines the types of social behaviors portrayed by families in various television series and explores children's impressions of the TV family members. Content analysis of nine family-oriented TV series was employed to describe the ranges of behaviors of fathers, mothers and children on television. Eleven shows from each series…

  2. How do you say ‘hello’? Personality impressions from brief novel voices

    OpenAIRE

    McAleer, Phil; Todorov, Alexander; Belin, Pascal

    2014-01-01

    On hearing a novel voice, listeners readily form personality impressions of that speaker. Accurate or not, these impressions are known to affect subsequent interactions; yet the underlying psychological and acoustical bases remain poorly understood. Furthermore, hitherto studies have focussed on extended speech as opposed to analysing the instantaneous impressions we obtain from first experience. In this paper, through a mass online rating experiment, 320 participants rated 64 sub-second voca...

  3. Effectiveness of Disinfectants on Antimicrobial and Physical Properties of Dental Impression Materials.

    Science.gov (United States)

    Demajo, Jean Karl; Cassar, Valter; Farrugia, Cher; Millan-Sango, David; Sammut, Charles; Valdramidis, Vasilis; Camilleri, Josette

    2016-01-01

    The aim of this study was to assess the antimicrobial activity of chemical disinfectants on alginate and silicone impression materials. The effect of chemical disinfectants on the dimensional stability of the impression materials was also assessed. For the microbiologic assessment, impressions of the maxillary arch were taken from 14 participants, 7 using alginate and 7 using an addition silicone. The impressions were divided into three sections. Each section was subjected to spraying with MD 520 or Minuten or no disinfection (control), respectively. Antimicrobial action of the chemical disinfectants was assessed by measuring microbial counts in trypticase soy agar (TSA) media and expressing the results in colony-forming units/cm2. The surface area of the dental impressions was calculated by scanning a stone cast using computer-aided design/computer-assisted manufacture and analyzing the data using a custom computer program. The dimensional stability of the impression materials after immersion in disinfectants was assessed by measuring the linear displacement of horizontally restrained materials using a traveling microscope. The percent change in length over 3 hours was thus determined. Alginate exhibited a higher microbial count than silicone. MD 520 eliminated all microbes as opposed to Minuten. The bacterial growth after Minuten disinfection was almost twice as much for alginate than for addition silicone impressions. The chemical disinfectants affected the alginate dimensional stability. Minuten reduced the shrinkage sustained by alginate during the first hour of storage. Alginate harbors three times more microorganisms than silicone impression material. Chemical disinfection by glutaraldehyde-based disinfectant was effective in eliminating all microbial forms for both alginate and silicone without modifying the dimensional stability. Alcohol-based disinfectants, however, reduced the alginate shrinkage during the first 90 minutes of setting. The current studies

  4. Comparing Clinical Profiles in Alzheimer's Disease and Parkinson's Disease Dementia

    Directory of Open Access Journals (Sweden)

    Martin R. Farlow

    2013-09-01

    Full Text Available Background: Greater understanding of differences in baseline impairment and disease progression in patients with Alzheimer's disease (AD and Parkinson's disease dementia (PDD may improve the interpretation of drug effects and the design of future studies. Methods: This was a retrospective analysis of three randomized, double-blind rivastigmine databases (one in PDD, two in AD. Impairment on the Alzheimer's Disease Assessment Scale-cognitive subscale (ADAS-cog, Alzheimer's Disease Cooperative Study-Activities of Daily Living (ADCS-ADL scale, 10-item Neuropsychiatric Inventory (NPI-10 and the ADCS-Clinical Global Impression of Change (CGIC was compared [standardized difference (Cohen's d, similar if Results: Patients with AD or PDD had similar levels of impairment on the ADAS-cog and NPI-10. Scores on the ADCS-ADL scale (standardized difference = 0.47 and the ADAS-cog memory domain (total, 0.33; items, 0.10-0.58 were higher in AD; PDD patients were more impaired in the language (0.23 and praxis (0.34 domains. AD patients receiving placebo showed greater deterioration on the ADAS-cog (0.14 and improvement on the NPI-10 (0.11 compared with patients with PDD. Conclusion: Differing patterns of impairment occur in AD and PDD.

  5. Comparing clinical profiles in Alzheimer's disease and Parkinson's disease dementia.

    Science.gov (United States)

    Farlow, Martin R; Schmitt, Frederick; Aarsland, Dag; Grossberg, George T; Somogyi, Monique; Meng, Xiangyi

    2013-01-01

    Greater understanding of differences in baseline impairment and disease progression in patients with Alzheimer's disease (AD) and Parkinson's disease dementia (PDD) may improve the interpretation of drug effects and the design of future studies. This was a retrospective analysis of three randomized, double-blind rivastigmine databases (one in PDD, two in AD). Impairment on the Alzheimer's Disease Assessment Scale-cognitive subscale (ADAS-cog), Alzheimer's Disease Cooperative Study-Activities of Daily Living (ADCS-ADL) scale, 10-item Neuropsychiatric Inventory (NPI-10) and the ADCS-Clinical Global Impression of Change (CGIC) was compared [standardized difference (Cohen's d), similar if <0.1]. Patients with AD or PDD had similar levels of impairment on the ADAS-cog and NPI-10. Scores on the ADCS-ADL scale (standardized difference = 0.47) and the ADAS-cog memory domain (total, 0.33; items, 0.10-0.58) were higher in AD; PDD patients were more impaired in the language (0.23) and praxis (0.34) domains. AD patients receiving placebo showed greater deterioration on the ADAS-cog (0.14) and improvement on the NPI-10 (0.11) compared with patients with PDD. Differing patterns of impairment occur in AD and PDD.

  6. Neurofibromatosis, stroke and basilar impression: case report Neurofibromatose, acidente vascular cerebral e impressão basilar: relato de caso

    Directory of Open Access Journals (Sweden)

    ELCIO JULIATO PIOVESAN

    1999-06-01

    Full Text Available Neurofibromatosis type 1 (NF1 can virtually affect any organ, presenting most frequently with "cafe au lait" spots and neurofibromas. Vasculopathy is a known complication of NF1, but cerebrovascular disease is rare. We report the case of a 51-year-old man admitted to the hospital with a history of stroke four months before admission. On physical examination, he presented various "cafe au lait" spots and cutaneous neurofibromas. Neurologic examination demonstrated right-sided facial paralysis, right-sided hemiplegia, and aphasia. Computed tomography scan of head showed hypodense areas in the basal ganglia and centrum semiovale. Radiographs of cranium and cervical spine showed basilar impression. Angiography revealed complete occlusion of both vertebral and left internal carotid arteries, and partial stenosis of the right internal carotid artery. A large network of collateral vessels was present (moyamoya syndrome. It is an uncommon case of occlusive cerebrovascular disease associated with NF1, since most cases described in the literature are in young people, and tend to spare the posterior cerebral circulation. Basilar impression associated with this case may be considered a pure coincidence, but rare cases of basilar impression and NF1 have been described.A neurofibromatose tipo 1 (NF1 pode acometer qualquer órgão mas as apresentações mais frequente são manchas café com leite e neurofibromas. O envolvimento de vasos é complicação conhecida da NF1, mas a doença cerebrovascular é rara. Relatamos o caso de paciente do sexo masculino de 51 anos com história de acidente vascular cerebral há quatro meses da admissão. Ao exame físico apresentava várias manchas café com leite e neurofibromas cutâneos. O exame neurológico demonstrou acometimento facial direito, hemiplegia direita e afasia. Tomografia computadorizada de crânio mostrou áreas hipodensas nos gânglios basais e centros semi-ovais. Radiografias do crânio e coluna cervical

  7. Effect of storage period on the accuracy of elastomeric impressions

    Directory of Open Access Journals (Sweden)

    Eduardo Batista Franco

    2007-06-01

    Full Text Available AIMS: To investigate the effect of the storage period on the accuracy of recently developed elastomeric materials. METHODS: Simultaneous impressions of a steel die were taken using a polyether (I: Impregum Soft Heavy and Light body, 3M ESPE and vinyl polysiloxane (P: Perfectim Blue Velvet and Flexi-Velvet, J.Morita. The trays were loaded with the heavy-bodied impression materials while the light-bodied impression materials were simultaneously spread on the steel die. The impressions were poured after 2 hours, 24 hours, and 7 days. Impressions were stored at approximately 55% relative humidity and room temperature. Ten replicas were produced for each experimental condition (n=60. Accuracy of the stone dies was assessed with a depth-measuring microscope. The difference in height between the surface of the stone die and a standard metallic ring was recorded in micrometers at four demarcated points, by two independent examiners. Data were submitted to two-way ANOVA and Tukey test (a = 0.05. RESULTS: Significant differences were found among the groups. Smaller discrepancies were observed when pouring was performed up to 24 hours (I-2h= 65.0 ± 15.68 µm; I-24h= 81.6 ± 11.13 µm for the polyether, and up to 7 days for the vinyl polysiloxane (P-2h= 79.1 ± 13.82 µm; P-24h= 96.8 ± 6.02 µm; P-7d= 81.4 ± 4.3 µm. Significant dimensional discrepancies, however, were observed when polyether was stored for 7 days (I-7d= 295.3 ± 17.4 µm. CONCLUSION: Storage may significantly affect the dimensional accuracy of impressions and, thus, a maximum period and storage condition should be specified for the recently developed materials.

  8. Contact angle of unset elastomeric impression materials.

    Science.gov (United States)

    Menees, Timothy S; Radhakrishnan, Rashmi; Ramp, Lance C; Burgess, John O; Lawson, Nathaniel C

    2015-10-01

    Some elastomeric impression materials are hydrophobic, and it is often necessary to take definitive impressions of teeth coated with some saliva. New hydrophilic materials have been developed. The purpose of this in vitro study was to compare contact angles of water and saliva on 7 unset elastomeric impression materials at 5 time points from the start of mixing. Two traditional polyvinyl siloxane (PVS) (Aquasil, Take 1), 2 modified PVS (Imprint 4, Panasil), a polyether (Impregum), and 2 hybrid (Identium, EXA'lence) materials were compared. Each material was flattened to 2 mm and a 5 μL drop of distilled water or saliva was dropped on the surface at 25 seconds (t0) after the start of mix. Contact angle measurements were made with a digital microscope at initial contact (t0), t1=2 seconds, t2=5 seconds, t3=50% working time, and t4=95% working time. Data were analyzed with a generalized linear mixed model analysis, and individual 1-way ANOVA and Tukey HSD post hoc tests (α=.05). For water, materials grouped into 3 categories at all time-points: the modified PVS and one hybrid material (Identium) produced the lowest contact angles, the polyether material was intermediate, and the traditional PVS materials and the other hybrid (EXA'lence) produced the highest contact angles. For saliva, Identium, Impregum, and Imprint 4 were in the group with the lowest contact angle at most time points. Modified PVS materials and one of the hybrid materials are more hydrophilic than traditional PVS materials when measured with water. Saliva behaves differently than water in contact angle measurement on unset impression material and produces a lower contact angle on polyether based materials. Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

  9. Oxytocin and first impressions

    OpenAIRE

    Friberg, Mads

    2012-01-01

    Subtle facial expressions may cause "core impressions" of other people, i.e. a feeling of like or dislike witch is affected by facial cues that is not explicitly and consciously recognized. In the present investigation, we were interested in how the neuropeptide oxytocin affects recognition of these subtle facial expressions. Participants received oxytocin or placebo, and viewed static and dynamic "hybrid" faces that showed a facial expression (happiness, anger, fear, sadness) only in the lo...

  10. Managing impressions and forests

    OpenAIRE

    Ångman, Elin; Hallgren, Lars; Nordström, Eva-Maria

    2011-01-01

    Social interaction is an important—and often forgotten—aspect of conflicts in natural resource management (NRM). Building on the theoretical framework of symbolic interaction, this article explores how the concept of impression management during social interaction can help understand NRM conflicts. A qualitative study was carried out on a Swedish case involving a conflict over clear-cutting of a forest. To explain why the conflict escalated and destructivity increased, we investigated how the...

  11. Comparative study of the effects of bupropion and escitalopram on Internet gaming disorder.

    Science.gov (United States)

    Song, Jinuk; Park, Jeong Ha; Han, Doug Hyun; Roh, Sungwon; Son, Ji Hyun; Choi, Tae Young; Lee, Hyuk; Kim, Tae Ho; Lee, Young Sik

    2016-11-01

    We compared the efficacy of bupropion and escitalopram treatments in Internet gaming disorder (IGD) patients. We recruited 119 adolescents and adults with IGD. We treated these participants for 6 weeks in three groups as follows: 44 participants were treated with bupropion SR (bupropion group), 42 participants were treated with escitalopram (escitalopram group), and 33 patients without any medication were observed in the community (observation group). At baseline and at the 6-week follow-up visit, all subjects were evaluated using the Clinical Global Impression-Severity Scale, the Young Internet Addiction Scale, the Beck Depression Inventory, the ADHD Rating Scale, and the Behavioral Inhibition and Activation Scales. Both the escitalopram group and the bupropion group showed improvement on all clinical symptom scales after 6 weeks of treatment compared to the observation group. Additionally, the bupropion group showed greater improvement on scores for the Clinical Global Impression-Severity Scale, the Young Internet Addiction Scale, the ADHD Rating Scale, and the Behavioral Inhibition Scale than the escitalopram group. Both bupropion and escitalopram were effective in treating and managing IGD symptoms. Moreover, bupropion appeared to be more effective than escitalopram in improving attention and impulsivity in IGD patients. In addition, attention and impulsivity seem to be important for the management of IGD. © 2016 The Authors. Psychiatry and Clinical Neurosciences © 2016 Japanese Society of Psychiatry and Neurology.

  12. The effect of impression volume and double-arch trays on the registration of maximum intercuspation.

    Science.gov (United States)

    Hahn, Sara M; Millstein, Philip L; Kinnunen, Taru H; Wright, Robert F

    2009-12-01

    The type of double-arch trays used may affect occlusion. The purpose of this study was to determine what effect, if any, double-arch tray design and impression material volume had on the registration of maximum intercuspation (MI). Quadrant impressions were made on articulated fracture-resistant dental casts mounted in maximum intercuspation occlusion. Three types of sideless double-arch impression trays were used: First Bite with nylon webbing, Sultan's 3-Way with double crosshatch webbing, and Premium's 3-in-1 Tray with single crosshatch webbing. Vinyl polysiloxane impression material (Aquasil Ultra Rigid Fast Set) was distributed at 2 different volumes (5.4 ml and 8.3 ml), and 60 impressions were made (n=10). A weight of 1.2 kg was placed on the upper arm of an Artex articulator, ensuring complete closure. The impressions were allowed to polymerize for 5 minutes. After polymerization, specimens were placed on a light box, and a camera set at a fixed distance was used to capture the light transmission that was projected through the impression material. The camera transferred the information to an image analysis program (ImageJ). This system allowed the different amounts of light projected through the impression to be translated into a gray scale value (GSV), which was assigned a thickness value, in millimeters, of a specified occlusal contact area. To assess reliability of the experimental design, 10 control impressions were made by directly applying impression material onto the typodont. These were analyzed in the same manner as the impressions made with trays. A 2-way ANOVA comparing volume by tray type was used (alpha=.05). This was followed by a Tukey HSD test. There was no main effect for volume of impression material (P=.71). Tray type was significantly different (Precord making.

  13. Do Clinical Practice Guidelines Improve Quality?

    Science.gov (United States)

    Baldassari, Cristina M

    2017-07-01

    Controversy exists surrounding how to best define and assess quality in the health care setting. Clinical practice guidelines (CPGs) have been developed to improve the quality of medical care by highlighting key clinical recommendations based on recent evidence. However, data linking CPGs to improvements in outcomes in otolaryngology are lacking. Numerous barriers contribute to difficulties in translating CPGs to improvements in quality. Future initiatives are needed to improve CPG adherence and define the impact of CPG recommendations on the quality of otolaryngologic care provided to our patients.

  14. Crime scene reconstruction-Sex prediction from blood stained foot sole impressions.

    Science.gov (United States)

    Basu, Nabanita; Bandyopadhyay, Samir Kumar

    2017-09-01

    It is often difficult to predict the sex of an individual based on bloody incomplete footprints. However, such prints/impressions are particularly common in a crime scene. Again variability in the texture, color of the target surface has an impact on the bloodstained impression formed. The study of bare foot, footprint, footwear (i.e. shoe, canvas etc.) within the legal context is referred to as forensic podiatry. Based on the fact that it is possible to predict the sex of an individual from footprint impressions, an automated model has been proposed in this paper for analyzing the sex of an individual from his/her broken/incomplete footprint impressions based on morphological features alone. Five male and female volunteers aged between 20 to 65 years participated in dataset development. Keeping the blood volume constant and having stepped on differently shaped porcine blood pools, the individuals were asked to walk on herbarium sheets. The footprints were recorded and documented in accordance with the guidelines in place for physical evidence documentation within the forensic domain. The morphological features that were extracted from each of the footprint impressions are footprint length, footprint breadth, angle of walking, approximated heel radius etc. Using exhaustive cross validation technique, the dataset was divided into training and test set. Non-redundant, relevant features that are particularly effective at sex prediction were marked out using the relief algorithm in coherence with the correlation metric. Supervised learning techniques were used on the dataset to predict the sex of the owner of an unknown footprint. The study concentrates on morphological features in order to deal with bloodstain footprint transfer stains formed on any non-porous/non-absorbent surfaces such as cemented floor, glass, mosaic floor space, colored and designed tiled floor spaces. Features such as the angle of walking and foot breadth were found to be particularly influential

  15. Toward an Improved Understanding of the Global Fresh Water Budget

    Science.gov (United States)

    Hildebrand, Peter H.

    2005-01-01

    The major components of the global fresh water cycle include the evaporation from the land and ocean surfaces, precipitation onto the Ocean and land surfaces, the net atmospheric transport of water from oceanic areas over land, and the return flow of water from the land back into the ocean. The additional components of oceanic water transport are few, principally, the mixing of fresh water through the oceanic boundary layer, transport by ocean currents, and sea ice processes. On land the situation is considerably more complex, and includes the deposition of rain and snow on land; water flow in runoff; infiltration of water into the soil and groundwater; storage of water in soil, lakes and streams, and groundwater; polar and glacial ice; and use of water in vegetation and human activities. Knowledge of the key terms in the fresh water flux budget is poor. Some components of the budget, e.g. precipitation, runoff, storage, are measured with variable accuracy across the globe. We are just now obtaining precise measurements of the major components of global fresh water storage in global ice and ground water. The easily accessible fresh water sources in rivers, lakes and snow runoff are only adequately measured in the more affluent portions of the world. presents proposals are suggesting methods of making global measurements of these quantities from space. At the same time, knowledge of the global fresh water resources under the effects of climate change is of increasing importance and the human population grows. This paper provides an overview of the state of knowledge of the global fresh water budget, evaluating the accuracy of various global water budget measuring and modeling techniques. We review the measurement capabilities of satellite instruments as compared with field validation studies and modeling approaches. Based on these analyses, and on the goal of improved knowledge of the global fresh water budget under the effects of climate change, we suggest

  16. Effect of 1.0% Ni on high-temperature impression creep and hardness of recycled aluminium alloy with high Fe content

    Science.gov (United States)

    Faisal, M.; Mazni, Noor; Prasada Rao, A. K.

    2018-03-01

    Reported work focusses on the effect of 1.0% Ni addition on the microstructure, high- temperature impression creep and thereby the hardness of recycled Al-alloy containing >2wt% Fe, obtained from automotive scrap. Present studies have shown that the addition of 1.0% Ni have supress the formation of α-phase (Al5FeSi) by supressing the peritectic transformation of β-phase (Al8Fe2Si). Such suppression is found to improve the hardness and high-temperature impression creep of the recycled aluminium alloy.

  17. Globalization, Credence Goods and International Civil Society

    OpenAIRE

    Krautheim, Sebastian; Verdier, Thierry

    2012-01-01

    The process of globalization is characterized by an impressive growth in global value chains, as well as the proliferation of non-governmental organizations (NGOs) interacting with production and sourcing decisions of multinational firms. In this paper, we present a simple North-South model of international trade allowing for the joint emergence of firm offshoring to South and NGO activism financed by donations from the civil society. In our model northern consumers care about unobservable “c...

  18. Dishonest responding or true virtue? A behavioral test of impression management

    NARCIS (Netherlands)

    Zettler, I.; Hilbig, B.E.; Moshagen, M.; de Vries, R.E.

    2015-01-01

    Impression management or social desirability scales have been used widely to assess and control for self-favoring biases in self-reports, both in low and high demand situations. Recently, however, substantive interpretations of impression management scores have surfaced, including the simple but

  19. Malawian impressions of expatriate physicians: A qualitative study ...

    African Journals Online (AJOL)

    Background: In many low-income countries, including Malawi, expatriate physicians serve diverse roles in clinical care, education, mentorship, and research. A significant proportion of physicians from high-income countries have global health experience. Despite the well-known benefits of global health experiences for ...

  20. Impression Procedures for Metal Frame Removable Partial Dentures as Applied by General Dental Practitioners.

    NARCIS (Netherlands)

    Fokkinga, W.A.; Uchelen, J. van; Witter, D.J.; Mulder, J.; Creugers, N.H.J.

    2016-01-01

    This pilot study analyzed impression procedures for conventional metal frame removable partial dentures (RPDs). Heads of RPD departments of three dental laboratories were asked to record features of all incoming impressions for RPDs during a 2-month period. Records included: (1) impression

  1. Image-Rich Radiology Reports: A Value-Based Model to Improve Clinical Workflow.

    Science.gov (United States)

    Patel, Bhavik N; Lopez, Jose M; Jiang, Brian G; Roth, Christopher J; Nelson, Rendon C

    2017-01-01

    To determine the value of image-rich radiology reports (IRRR) by evaluating the interest and preferences of referring physicians, potential impact on clinical workflow, and the willingness of radiologists to create them. Referring physicians and radiologists were interviewed in this prospective, HIPAA-compliant study. Subject willingness to participate in the study was determined by an e-mail. A single investigator conducted all interviews using a standard questionnaire. All subjects reviewed a video mockup demonstration of IRRR and three methods for viewing embedded images, as follows: (1) clickable hyperlinks to access a scrollable stack of images, (2) scrollable and enlargeable small-image thumbnails, and (3) scrollable but not enlargeable medium-sized images. Questionnaire responses, free comments, and general impressions were captured and analyzed. Seventy-two physicians (36 clinicians, 36 radiologists) were interviewed. Thirty-one clinicians (86%) expressed interest in using IRRR. Seventy-seven percent of subjects believed IRRR would improve communication. Ten clinicians (28%) preferred method 1, 18 (50%) preferred method 2, and 8 (22%) preferred method 3 for embedding images. Thirty clinicians (83%) stated that IRRR would improve efficiency. Twenty-two radiologists (61%) preferred selecting a tool button with a mouse and right-clicking images to embed them, 13 (36%) preferred pressing a function key, and 11 (31%) preferred dictating series and image numbers. The average time radiologists were willing to expend for embedding images was 66.7 seconds. Referring physicians and radiologist both believe IRRR would add value by improving communication with the potential to improve the workflow efficiency of referring physicians. Copyright © 2016 American College of Radiology. Published by Elsevier Inc. All rights reserved.

  2. Evaluation of properties of irreversible hydrocolloid impression materials mixed with disinfectant liquids

    Directory of Open Access Journals (Sweden)

    Arul Amalan

    2013-01-01

    Conclusion: Chlorhexidine solution can be used to mix irreversible hydrocolloid impression materials in regular dental practice as it did not significantly alter the properties. This may ensure effective disinfection of impressions.

  3. Visual form-processing deficits: a global clinical classification.

    Science.gov (United States)

    Unzueta-Arce, J; García-García, R; Ladera-Fernández, V; Perea-Bartolomé, M V; Mora-Simón, S; Cacho-Gutiérrez, J

    2014-10-01

    Patients who have difficulties recognising visual form stimuli are usually labelled as having visual agnosia. However, recent studies let us identify different clinical manifestations corresponding to discrete diagnostic entities which reflect a variety of deficits along the continuum of cortical visual processing. We reviewed different clinical cases published in medical literature as well as proposals for classifying deficits in order to provide a global perspective of the subject. Here, we present the main findings on the neuroanatomical basis of visual form processing and discuss the criteria for evaluating processing which may be abnormal. We also include an inclusive diagram of visual form processing deficits which represents the different clinical cases described in the literature. Lastly, we propose a boosted decision tree to serve as a guide in the process of diagnosing such cases. Although the medical community largely agrees on which cortical areas and neuronal circuits are involved in visual processing, future studies making use of new functional neuroimaging techniques will provide more in-depth information. A well-structured and exhaustive assessment of the different stages of visual processing, designed with a global view of the deficit in mind, will give a better idea of the prognosis and serve as a basis for planning personalised psychostimulation and rehabilitation strategies. Copyright © 2011 Sociedad Española de Neurología. Published by Elsevier Espana. All rights reserved.

  4. How do you say 'hello'? Personality impressions from brief novel voices.

    Science.gov (United States)

    McAleer, Phil; Todorov, Alexander; Belin, Pascal

    2014-01-01

    On hearing a novel voice, listeners readily form personality impressions of that speaker. Accurate or not, these impressions are known to affect subsequent interactions; yet the underlying psychological and acoustical bases remain poorly understood. Furthermore, hitherto studies have focussed on extended speech as opposed to analysing the instantaneous impressions we obtain from first experience. In this paper, through a mass online rating experiment, 320 participants rated 64 sub-second vocal utterances of the word 'hello' on one of 10 personality traits. We show that: (1) personality judgements of brief utterances from unfamiliar speakers are consistent across listeners; (2) a two-dimensional 'social voice space' with axes mapping Valence (Trust, Likeability) and Dominance, each driven by differing combinations of vocal acoustics, adequately summarises ratings in both male and female voices; and (3) a positive combination of Valence and Dominance results in increased perceived male vocal Attractiveness, whereas perceived female vocal Attractiveness is largely controlled by increasing Valence. Results are discussed in relation to the rapid evaluation of personality and, in turn, the intent of others, as being driven by survival mechanisms via approach or avoidance behaviours. These findings provide empirical bases for predicting personality impressions from acoustical analyses of short utterances and for generating desired personality impressions in artificial voices.

  5. How do you say 'hello'? Personality impressions from brief novel voices.

    Directory of Open Access Journals (Sweden)

    Phil McAleer

    Full Text Available On hearing a novel voice, listeners readily form personality impressions of that speaker. Accurate or not, these impressions are known to affect subsequent interactions; yet the underlying psychological and acoustical bases remain poorly understood. Furthermore, hitherto studies have focussed on extended speech as opposed to analysing the instantaneous impressions we obtain from first experience. In this paper, through a mass online rating experiment, 320 participants rated 64 sub-second vocal utterances of the word 'hello' on one of 10 personality traits. We show that: (1 personality judgements of brief utterances from unfamiliar speakers are consistent across listeners; (2 a two-dimensional 'social voice space' with axes mapping Valence (Trust, Likeability and Dominance, each driven by differing combinations of vocal acoustics, adequately summarises ratings in both male and female voices; and (3 a positive combination of Valence and Dominance results in increased perceived male vocal Attractiveness, whereas perceived female vocal Attractiveness is largely controlled by increasing Valence. Results are discussed in relation to the rapid evaluation of personality and, in turn, the intent of others, as being driven by survival mechanisms via approach or avoidance behaviours. These findings provide empirical bases for predicting personality impressions from acoustical analyses of short utterances and for generating desired personality impressions in artificial voices.

  6. [Impression management and self-presentation in occupational life].

    Science.gov (United States)

    Stresemann, E

    2013-06-01

    Impression management serves self-preservation as part of self-experience. It is adapted to a given situation as an expression of understanding of the role it plays in striving for success. Impression management and self-presentation mutually influence each other throughout life. Clichés in the traditional self-presentation of men and woman in their gender-specific domain in occupation belong to the past. In employment, contentment as much as discontent are of prime importance for success or failure in the workplace. As role models attract mainly juveniles, they should be held up to critical scrutiny.

  7. Coping with stereotype threat: denial as an impression management strategy.

    Science.gov (United States)

    von Hippel, William; von Hippel, Courtney; Conway, Leanne; Preacher, Kristopher J; Schooler, Jonathan W; Radvansky, Gabriel A

    2005-07-01

    Four experiments tested the hypothesis that people who are concerned with impression management cope with stereotype threat through denial. Consistent with this hypothesis, temporary employees threatened by a stereotype of incompetence (Study 1) and hostel-dwelling older adults (Study 2) were more likely to deny incompetence if they were high in impression management. African Americans (Study 3) showed a similar pattern of denying cognitive incompetence, which emerged primarily when they were interviewed by a White experimenter and had attended a predominantly Black high school. In Study 4, White students who expected to take an IQ test and were threatened by a stereotype of being less intelligent than Asians were more likely to deny that intelligence is important if they were high in impression management.

  8. Bragging on Facebook: The Interaction of Content Source and Focus in Online Impression Formation.

    Science.gov (United States)

    Scott, Graham G; Ravenscroft, Kirsty

    2017-01-01

    Warranting Theory proposes that third-party testimonials are more influential in online impression formation than target-authored statements. Individuals posting content on social media accurately convey their offline personality while endeavoring to present themselves in a positive light. In doing so, they may misjudge the psychological distance of the majority of viewers, who could view this positive self-presentation as bragging and form resultant negative impressions. In this study, we asked 136 participants to view the Facebook timelines of four female targets. Timeline content varied by source (owner- vs. friend-authored) and focus (generally positive vs. personally positive). Participants were tasked with forming impressions of targets and rating them based on attractiveness, confidence, modesty, and popularity. We found that source and focus played distinct roles in impression formation. More positive impressions were formed when owner-authored content was general, and when friend-authored content was personal. This highlights the role played by content focus in impression formation, and the potentially damaging effect of perceived bragging. These results are discussed in relation to the application of the Warranting Theory of impression formation online, and discrepancies between these results and those from related articles are examined.

  9. Accuracy and dimensional stability of extended-pour and conventional alginate impression materials.

    Science.gov (United States)

    Imbery, Terence A; Nehring, Joshua; Janus, Charles; Moon, Peter C

    2010-01-01

    The authors conducted a study to determine if two irreversible hydrocolloid impression materials (Cavex ColorChange, Cavex Holland BV, Haarlem, Netherlands; Jeltrate Plus Antimicrobial Dustless Alginate Impression Material, Dentsply Caulk, Milford, Del.) stored for five days were dimensionally accurate. The authors modified Ivorine teeth (Columbia Dentoform, Long Island City, N.Y.) on a Dentoform model (1560 series model, Columbia Dentoform) to allow measurements of tooth and arch width. They made impressions and generated casts immediately and at five additional times. They recorded tooth and arch widths on the casts and compared the measurements with those for the standard model. Compared with measurements for the model, the greatest measured difference in casts was 0.003 inches for Cavex ColorChange (extended-pour alginate) and 0.005 inches for Jeltrate Plus Antimicrobial Dustless Alginate Impression Material (conventional alginate). The percentage of dimensional change ranged from -0.496 to 0.161 percent for the extended-pour alginate and from -0.174 to 0.912 percent for the conventional alginate. Results of analysis of variance and paired t tests indicated that when generated immediately and at day 5, casts produced from both impression materials were not statistically different from the standard model (P alginate materials can produce accurate impressions at day 5 for diagnostic casts and for fabrication of acrylic appliances.

  10. Accuracy of Single-Step versus 2-Step Double-Mix Impression Technique

    DEFF Research Database (Denmark)

    Franco, Eduardo Batista; da Cunha, Leonardo Fernandes; Herrera, Francyle Simões

    2011-01-01

    Objective. To investigate the accuracy of dies obtained from single-step and 2-step double-mix impressions. Material and Methods. Impressions (n = 10) of a stainless steel die simulating a complete crown preparation were performed using a polyether (Impregum Soft Heavy and Light body) and a vinyl...

  11. Citologia de impressão no diagnóstico de infecção corneana por Acanthamoeba: relato de caso Diagnosis of Acanthamoeba corneal infection by impression cytology: case report

    Directory of Open Access Journals (Sweden)

    Jeison de Nadai Barros

    2007-03-01

    Full Text Available Relatamos três casos de infecção corneana por Acanthamoeba sp em que foi possível detectar cistos do microorganismo com a técnica de citologia de impressão. Três pacientes encaminhados ao Laboratório de Doenças Externas Oculares em 2004 com alterações superficiais da córnea foram submetidos ao exame de citologia de impressão para investigação da presença de cistos de Acanthamoeba sp. Duas amostras foram obtidas da córnea de cada paciente e coradas com PAS, hematoxilina e Papanicolaou. Investigação microbiológica de rotina e cultura também foram realizadas após raspado da córnea. O cultivo das amostras e a citologia de impressão foram positivas para Acanthamoeba sp em todos os pacientes, ao passo que os raspados corados com Giemsa foram positivos em dois casos. A citologia de impressão revelou cistos de Acanthamoeba sp entre feixe de células epiteliais corneanas e como células isoladas. Foram observados cistos no epitélio de um dos pacientes com a citologia de impressão após três meses de tratamento, enquanto o raspado foi negativo. No exame anatomopatológico observaram-se cistos no epitélio e estroma de uma córnea receptora de um dos pacientes após transplante. Neste estudo, a citologia de impressão detectou com sucesso cistos de Acanthamoeba sp em pacientes com acometimento epitelial. Por tratar-se de método não invasivo, a técnica pode ser usada para facilitar o diagnóstico mais precoce da infecção por Acanthamoeba, sendo útil também no acompanhamento do tratamento da doença.To describe three cases of corneal infection due to Acanthamoeba sp in which was possible to detect Acanthamoeba sp cysts by the corneal impression cytology technique. Three patients referred to the External Eye Disease Laboratory in 2004 with superficial corneal alterations were submitted to corneal specimen collection by impression cytology filter paper to investigate the presence of Acanthamoeba sp cysts. Two impression

  12. Measuring sodium alginate content of brown algae species Padina sp. as the basic matter for making dental impression material (Irreversible hydrocolloid impression material)

    OpenAIRE

    Nurlindah Hamrun; Suci Amalia Rachman

    2016-01-01

    One of the most important procedures in denture fabrication and orthodontic treatment is molding the patient’s detail oral cavity to determine the treatment planning. This procedure was done by using alginate impression material or irreversible hydrocolloid in which the basic material is sodium alginate imported from abroad because it is extracted from brown algae which its habitat is not in Indonesia so that it is causes the impression material is relatively expensive roomates is impact to h...

  13. Measuring natrium alginate content of brown algae spesies Padina sp. as the basic matter for making dental impression material (Irreversible hydrocolloid impression material)

    OpenAIRE

    Nurlindah Hamrun; Suci Amalia Rachman

    2016-01-01

    One of the most important procedure in denture fabrication and orthodontic treatment is molding the patient’s detail oral cavity to determine the treatment planning. This procedure does by using alginate impression material or irreversible hydrocolloid which is the basic material is natrium alginate which is imported from abroad because it is extracted from brown algae which habitat is not in Indonesia so it is causes the impression material is relative expensive which is impact to high cost ...

  14. In vivo precision of conventional and digital methods of obtaining complete-arch dental impressions

    OpenAIRE

    Ender, Andreas; Attin, Thomas; Mehl, Albert

    2016-01-01

    STATEMENT OF PROBLEM: Digital impression systems have undergone significant development in recent years, but few studies have investigated the accuracy of the technique in vivo, particularly compared with conventional impression techniques. PURPOSE: The purpose of this in vivo study was to investigate the precision of conventional and digital methods for complete-arch impressions. MATERIAL AND METHODS: Complete-arch impressions were obtained using 5 conventional (polyether, POE; vinylsilox...

  15. The use of impression management tactics in structured interviews: a function of question type?

    Science.gov (United States)

    Ellis, Aleksander P J; West, Bradley J; Ryan, Ann Marie; DeShon, Richard P

    2002-12-01

    This study investigated impression management tactic use during structured interviews containing both experience-based and situational questions. Specifically, the authors examined whether applicants' use of impression management tactics depended on question type. Results from 119 structured interviews indicated that almost all of the applicants used some form of impression management. Significantly more assertive than defensive impression management tactics were used, and among assertive tactics, applicants tended to use self-promotion rather than ingratiation. However, different question types prompted the use of different impression management tactics. Ingratiation tactics were used significantly more when applicants answered situational questions, whereas self-promotion tactics were used significantly more when applicants answered experience-based questions. Furthermore, the use of self-promotion and ingratiation tactics was positively related to interviewer evaluations.

  16. Marginal and Internal Fit of Cobalt-Chromium Fixed Dental Prostheses Generated from Digital and Conventional Impressions

    OpenAIRE

    Svanborg, Per; Skjerven, Henrik; Carlsson, Pablo; Eliasson, Alf; Karlsson, Stig; Örtorp, Anders

    2014-01-01

    Objectives. Digital impressions are increasingly used and have the potential to avoid the problem of inaccurate impressions. Only a few studies to verify the accuracy of digital impressions have been performed. The purpose of this study was to compare the marginal and internal fit of 3-unit tooth supported fixed dental prostheses (FDPs) fabricated from digital and conventional impressions. Methods. Ten FDPs were produced from digital impressions using the iTero system and 10 FDPs were produce...

  17. The Global Health Service Partnership: An Academic–Clinical Partnership to Build Nursing and Medical Capacity in Africa

    Directory of Open Access Journals (Sweden)

    Eileen M. Stuart-Shor

    2017-07-01

    Full Text Available The World Health Organization estimates a global deficit of about 12.9 million skilled health professionals (midwives, nurses, and physicians by 2035. These shortages limit the ability of countries, particularly resource-constrained countries, to deliver basic health care, to respond to emerging and more complex needs, and to teach, graduate, and retain their future health professionals—a vicious cycle that is perpetuated and has profound implications for health security. The Global Health Service Partnership (GHSP is a unique collaboration between the Peace Corps, President’s Emergency Plan for AIDS Relief, Seed and host-country institutions, which aims to strengthen the breadth and quality of medical and nursing education and care delivery in places with dire shortages of health professionals. Nurse and physician educators are seconded to host institutions to serve as visiting faculty alongside their local colleagues. They serve for 1 year with many staying longer. Educational and clinical best practices are shared, emphasis is placed on integration of theory and practice across the academic–clinical domains and the teaching and learning environment is expanded to include implementation science and dissemination of locally tailored and sustainable practice innovations. In the first 3 years (2013–2016 GHSP placed 97 nurse and physician educators in three countries (Malawi, Tanzania, and Uganda. These educators have taught 454 courses and workshops to 8,321 trainees, faculty members, and practicing health professionals across the curriculum and in myriad specialties. Mixed-methods evaluation included key stakeholder interviews with host institution faculty and students who indicate that the addition of GHSP enhanced clinical teaching (quality and breadth resulting in improved clinical skills, confidence, and ability to connect theory to practice and critical thinking. The outputs and outcomes from four exemplars which focus on the

  18. Global impression of perceived difficulties in children and adolescents with attention-deficit/hyperactivity disorder: Reliability and validity of a new instrument assessing perceived difficulties from a patient, parent and physician perspective over the day

    Directory of Open Access Journals (Sweden)

    Dittmann Ralf W

    2008-05-01

    Full Text Available Abstract Background The objective of this analysis was to evaluate the psychometric properties of a brief scale developed to assess the degree of difficulties in children with Attention-Deficit/Hyperactivity Disorder (ADHD. The Global Impression of Perceived Difficulties (GIPD scale reflects overall impairment, psychosocial functioning and Quality of Life (QoL as rated by patient, parents and physician at various times of the day. Methods In two open-label studies, ADHD-patients aged 6–17 years were treated with atomoxetine (target-dose 0.5–1.2 mg/kg/day. ADHD-related difficulties were assessed up to week 24 using the GIPD. Data from both studies were combined to validate the scale. Results Overall, 421 patients received atomoxetine. GIPD scores improved over time. All three GIPD-versions (patient, parent, physician were internally consistent; all items showed at least moderate item-total correlation. The scale showed good test-retest reliability over a two-week period from all three perspectives. Good convergent and discriminant validity was shown. Conclusion GIPD is an internally consistent, reliable and valid measure to assess difficulties in children with ADHD at various times of the day and can be used as indicator for psychosocial impairment and QoL. The scale is sensitive to treatment-related change.

  19. Differential Globalization of Industry- and Non-Industry-Sponsored Clinical Trials.

    Science.gov (United States)

    Atal, Ignacio; Trinquart, Ludovic; Porcher, Raphaël; Ravaud, Philippe

    2015-01-01

    Mapping the international landscape of clinical trials may inform global health research governance, but no large-scale data are available. Industry or non-industry sponsorship may have a major influence in this mapping. We aimed to map the global landscape of industry- and non-industry-sponsored clinical trials and its evolution over time. We analyzed clinical trials initiated between 2006 and 2013 and registered in the WHO International Clinical Trials Registry Platform (ICTRP). We mapped single-country and international trials by World Bank's income groups and by sponsorship (industry- vs. non- industry), including its evolution over time from 2006 to 2012. We identified clusters of countries that collaborated significantly more than expected in industry- and non-industry-sponsored international trials. 119,679 clinical trials conducted in 177 countries were analysed. The median number of trials per million inhabitants in high-income countries was 100 times that in low-income countries (116.0 vs. 1.1). Industry sponsors were involved in three times more trials per million inhabitants than non-industry sponsors in high-income countries (75.0 vs. 24.5) and in ten times fewer trials in low- income countries (0.08 vs. 1.08). Among industry- and non-industry-sponsored trials, 30.3% and 3.2% were international, respectively. In the industry-sponsored network of collaboration, Eastern European and South American countries collaborated more than expected; in the non-industry-sponsored network, collaboration among Scandinavian countries was overrepresented. Industry-sponsored international trials became more inter-continental with time between 2006 and 2012 (from 54.8% to 67.3%) as compared with non-industry-sponsored trials (from 42.4% to 37.2%). Based on trials registered in the WHO ICTRP we documented a substantial gap between the globalization of industry- and non-industry-sponsored clinical research. Only 3% of academic trials but 30% of industry trials are

  20. Differential Globalization of Industry- and Non-Industry–Sponsored Clinical Trials

    Science.gov (United States)

    Atal, Ignacio; Trinquart, Ludovic; Porcher, Raphaël; Ravaud, Philippe

    2015-01-01

    Background Mapping the international landscape of clinical trials may inform global health research governance, but no large-scale data are available. Industry or non-industry sponsorship may have a major influence in this mapping. We aimed to map the global landscape of industry- and non-industry–sponsored clinical trials and its evolution over time. Methods We analyzed clinical trials initiated between 2006 and 2013 and registered in the WHO International Clinical Trials Registry Platform (ICTRP). We mapped single-country and international trials by World Bank's income groups and by sponsorship (industry- vs. non- industry), including its evolution over time from 2006 to 2012. We identified clusters of countries that collaborated significantly more than expected in industry- and non-industry–sponsored international trials. Results 119,679 clinical trials conducted in 177 countries were analysed. The median number of trials per million inhabitants in high-income countries was 100 times that in low-income countries (116.0 vs. 1.1). Industry sponsors were involved in three times more trials per million inhabitants than non-industry sponsors in high-income countries (75.0 vs. 24.5) and in ten times fewer trials in low- income countries (0.08 vs. 1.08). Among industry- and non-industry–sponsored trials, 30.3% and 3.2% were international, respectively. In the industry-sponsored network of collaboration, Eastern European and South American countries collaborated more than expected; in the non-industry–sponsored network, collaboration among Scandinavian countries was overrepresented. Industry-sponsored international trials became more inter-continental with time between 2006 and 2012 (from 54.8% to 67.3%) as compared with non-industry–sponsored trials (from 42.4% to 37.2%). Conclusions Based on trials registered in the WHO ICTRP we documented a substantial gap between the globalization of industry- and non-industry–sponsored clinical research. Only 3% of