WorldWideScience

Sample records for clean development mechanism

  1. Clean development mechanism: Perspectives from developing countries

    Energy Technology Data Exchange (ETDEWEB)

    Sari, Agus P.; Meyers, Stephen

    1999-06-01

    This paper addresses the political acceptability and workability of CDM by and in developing countries. At COP-3 in Kyoto in 1997, the general position among developing countries changed from strong rejection of joint implementation to acceptance of CDM. The outgrowth of CDM from a proposal from Brazil to establish a Clean Development Fund gave developing countries a sense of ownership of the idea. More importantly, establishing support for sustainable development as a main goal for CDM overcame the resistance of many developing countries to accept a carbon trading mechanism. The official acceptance of CDM is not a guarantee of continued acceptance, however. Many developing countries expect CDM to facilitate a substantial transfer of technology and other resources to support economic growth. There is concern that Annex I countries may shift official development assistance into CDM in order to gain carbon credits, and that development priorities could suffer as a result. Some fear that private investments could be skewed toward projects that yield carbon credits. Developing country governments are wary regarding the strong role of the private sector envisioned for CDM. Increasing the awareness and capacity of the private sector in developing countries to initiate and implement CDM projects needs to be a high priority. While private sector partnerships will be the main vehicle for resource transfer in CDM, developing country governments want to play a strong role in overseeing and guiding the process so that it best serves their development goals. Most countries feel that establishment of criteria for sustainable development should be left to individual countries. A key issue is how CDM can best support the strengthening of local capacity to sustain and replicate projects that serve both climate change mitigation and sustainable development objectives.There is support among developing countries for commencing CDM as soon as possible. Since official commencement must

  2. African perspectives on the clean development mechanism

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-08-01

    The papers, which are all written from an African perspective, are an important contribution to the debate surrounding the relevance and applicability of the Clean Development Mechanism in Africa. In addition to sector-specific discussions on the prospects for CDM in the energy, transport, industry and forestry sectors, various authors have attempted to tackle complex issues related to the instituional design of CDM, its mode of operation, participatory implementation and methodological questions such as baselines and additionality. (au)

  3. Baseline methodologies for clean development mechanism projects

    Energy Technology Data Exchange (ETDEWEB)

    Lee, M.K. (ed.); Shrestha, R.M.; Sharma, S.; Timilsina, G.R.; Kumar, S.

    2005-11-15

    The Kyoto Protocol and the Clean Development Mechanism (CDM) came into force on 16th February 2005 with its ratification by Russia. The increasing momentum of this process is reflected in more than 100 projects having been submitted to the CDM Executive Board (CDM-EB) for approval of the baselines and monitoring methodologies, which is the first step in developing and implementing CDM projects. A CDM project should result in a net decrease of GHG emissions below any level that would have resulted from other activities implemented in the absence of that CDM project. The 'baseline' defines the GHG emissions of activities that would have been implemented in the absence of a CDM project. The baseline methodology is the process/algorithm for establishing that baseline. The baseline, along with the baseline methodology, are thus the most critical element of any CDM project towards meeting the important criteria of CDM, which are that a CDM should result in 'real, measurable, and long term benefits related to the mitigation of climate change'. This guidebook is produced within the frame work of the United Nations Environment Programme (UNEP) facilitated 'Capacity Development for the Clean Development Mechanism (CD4CDM)' Project. This document is published as part of the projects effort to develop guidebooks that cover important issues such as project finance, sustainability impacts, legal framework and institutional framework. These materials are aimed to help stakeholders better understand the CDM and are believed to eventually contribute to maximize the effect of the CDM in achieving the ultimate goal of UNFCCC and its Kyoto Protocol. This Guidebook should be read in conjunction with the information provided in the two other guidebooks entitled, 'Clean Development Mechanism: Introduction to the CDM' and 'CDM Information and Guidebook' developed under the CD4CDM project. (BA)

  4. Overcoming barriers to Clean Development Mechanism projects

    Energy Technology Data Exchange (ETDEWEB)

    Ellis, J. [OECD, Paris (France); Kamel, S. [UNEP Risoe Centre on Energy, Climate and Sustainable Development URC, Roskilde (Denmark)

    2007-05-15

    The market for Clean Development Mechanism (CDM) projects is continuing to grow rapidly, with the current portfolio expecting to deliver 2 billion tons of CO2-eq greenhouse gas (GHG) emission reductions by 2012, equivalent to 17% of Annex I Parties' base year GHG emissions. In total, governments and companies have earmarked over USD11 billion for CDM funding to 2012. This study analyses the various barriers to CDM market expansion in developing countries, and makes recommendations on how some of them can be removed or reduced. It also examines the distribution of CDM projects amongst regions and sectors. Different types of barriers can impede the development of CDM projects. These include: National-level barriers not related specifically to the CDM such as the policy or legislative framework within which a CDM project operates, e.g. electricity-related regulations that constrain generation by independent power producers; National-level CDM-related barriers such as institutional capability/effectiveness or lack of awareness about CDM potential. For example, delays in host country approval of CDM projects can dampen interest in CDM project development; Project-related issues including availability (or not) of underlying project finance, or other country or project-related risks that render the performance of the project uncertain; International-level barriers such as constraints on project eligibility (e.g. on land use and forestry projects), available guidance and decisions (e.g. with respect to the inclusion of carbon capture and storage projects), etc. Thus, barriers to CDM development can arise at different parts of the CDM project cycle. The relative importance of particular barriers varies between countries as well as over time. A combination of factors is needed to drive growth in a country's CDM activity. This includes the presence of attractive CDM opportunities, a positive investment climate, and an enabling policy and legislative framework (in

  5. The clean development mechanism and Africa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    This document presents a summary of the issues presented and discussed at the African Regional Workshop on the Clean Development Mechanism (CDM). The CDM was introduced in Article 12 of the Kyoto Protocol to the United Nations Framework Convention on Climate Change (UNFCCC). The objectives of CDM are to assist non-Annex I Parties to the UNFCCC to promote sustainable development, and to assist Annex I Parties to achieve compliance with their emission limitation and reduction commitments under the Convention. Africa contributes a very small proportion of the world`s greenhouse gas emissions. At the same time the continent is highly vulnerable to the effects of climate change which may seriously impact on countries` development efforts. In order to set the background for the workshop and the deliberations of the participants, Chapter 2 presents a brief discussion of Climate Change and Sustainable Development in Africa. Chapter 3 further defines the context, aims and format of the workshop. This is followed in Chapter 4 by a summary of the papers presented during the four days. The papers covered activities in the energy, forestry, agriculture, industry and transport sectors, and addressed issues including: general perspectives on the CDM; institutions and governance of the CDM; baselines and additionality in the CDM; design of projects; project finance under the CDM. Chapter 5 presents a summary of the main issues discussed including modalities of the CDM, governance, equity, CDM projects, share of proceeds and capacity building. A number of areas of consensus emerged among workshop participants. These areas are described in Chapter 6. Finally a full list of participants is provided. (au)

  6. WP/072 Is the Clean Development Mechanism Promoting Sustainable Development?

    DEFF Research Database (Denmark)

    Huang, Yongfu; He, Jingjing; Tarp, Finn

    One of the dual objectives of the Clean Development Mechanism (CDM) of the Kyoto Protocol is to promote sustainable development in the host countries. With different CDM indicators for 58 CDM host countries over 2005-10, this paper empirically assesses whether CDM project development fulfils this...

  7. WP/072 Is the Clean Development Mechanism Promoting Sustainable Development?

    DEFF Research Database (Denmark)

    Huang, Yongfu; He, Jingjing; Tarp, Finn

    One of the dual objectives of the Clean Development Mechanism (CDM) of the Kyoto Protocol is to promote sustainable development in the host countries. With different CDM indicators for 58 CDM host countries over 2005-10, this paper empirically assesses whether CDM project development fulfils...

  8. An analysis of key issues in the clean development mechanism based on the UNEP Risoe clean development mechanism pipeline

    DEFF Research Database (Denmark)

    Fenhann, Jørgen Villy; Staun, Frederik

    2010-01-01

    This paper provides a description of the analysis contained in the UNEP Risoe Clean Development Mechanism (CDM) pipeline not available on the site, some of the impacts/problems of the CDM and a way forward post-2012. The successful development of the CDM since it started in December 2003 is docum......This paper provides a description of the analysis contained in the UNEP Risoe Clean Development Mechanism (CDM) pipeline not available on the site, some of the impacts/problems of the CDM and a way forward post-2012. The successful development of the CDM since it started in December 2003...

  9. The Clean Development Mechanism and Dynamic Capabilities of Implementing Firms

    DEFF Research Database (Denmark)

    Aggarwal, Aradhna

    This study assesses the impact of the Clean Development Mechanism (CDM) on the dynamic capabilities of implementing firms in India. While doing so, it uses three indicators of firms' dynamic capabilities: R&D expenditures to sales ratio, fuel consumption to sales ratio and total factor productivi...... the PROWESS database. Our results reveal that the CDM implementation does not have significant outcome effects on the dynamic capabilities of firms. Much depends on the type and size of the project, and size of the firm....

  10. Is the Clean Development Mechanism Effective for Emission Reductions?

    DEFF Research Database (Denmark)

    Tarp, Finn; Huang, Yongfu; He, Jingjing

    2014-01-01

    The UNFCCC COP 17 Durban conference confirmed the need to reach an all‐party‐inclusive global climate agreement by 2015 as the successor of the Kyoto Protocol. Although this Durban ‘road map’ is promising, the international negotiation process for reaching such a deal is bound to be filled...... with great challenges, given the wide divide between developed and developing nations. Against this background, comprehensive evaluations of the effectiveness of Kyoto market‐based mechanisms such as the Clean Development Mechanism (CDM) in terms of mitigating human‐induced climate change are urgently needed....... Such information is required to assess how the world's collective actions against climate change should proceed after Kyoto. This paper studies whether CDM is achieving its objective of emission reductions in the host countries. Here we empirically investigate the impacts of CDM projects on CO 2 emission...

  11. Principle-Based Ethics and the Clean Development Mechanism

    Energy Technology Data Exchange (ETDEWEB)

    Bay, Ingrid; Oughton, Deborah [Univ. of Oslo (Norway). The Ethics Programme

    2003-10-01

    Search for common values can go a long way resolving international political and social differences, and represents an area where ethical evaluation can offer an input to international legislation. This paper argues that a principle-based, normative approach should be applied to evaluation of Clean Development Mechanism (CDM) projects and the goal of sustainable development (SD). Primafacie ethical principles to promote weil-being, dignity and justice can be defined and supported from international agreements on sustainable developments. To promote coherency, these principles should then be specifled according to particular CDM-projects, to produce a set of norms that covers: 1) the different dimension to sustainable development, 2) the distribution of costs and benefits across time and place, and 3) consequences for different affected parties, including future generations and the environment.

  12. Determinants and outcome of a Clean Development Mechanism in Malaysia

    DEFF Research Database (Denmark)

    Zainuddin, Zainorfarah Binti; Zailani, Suhaiza; Govindan, Kannan

    2017-01-01

    technique. The results show that environmental regulations, competitiveness, and financial benefits have a positive impact on CDM implementation. Additionally, this study reported a significant positive effect of CDM implementation on economic performance. This paper extends the knowledge......The Clean Development Mechanism (CDM) enables transferring technology from developed countries to developing countries, such as Malaysia, and simultaneously promotes sustainable growth. Although this has been proven, the contribution of Malaysian companies in CDM projects is low. Therefore......, this study has been aimed at investigating the determinants of CDM adoption and its impact on companies' performances. Data were gathered by surveying 91 companies in the energy, agriculture, and forestry sectors in Malaysia implementing CDM projects. The data were analysed using the partial least squares...

  13. Joint Implementation, Clean Development Mechanism and Tradable Permits

    Energy Technology Data Exchange (ETDEWEB)

    Nielsen, L.; Rose Olsen, K.

    2000-06-01

    This report deals with international environmental instruments aimed at a cost-effective reduction of greenhouse gas emissions. More precisely the instruments mentioned in the Kyoto Protocol, namely Joint Implementation (JI), the Clean Development Mechanism (CDM) and Tradable Permits (TP). The report describes the background for the international co-operation on reducing the greenhouse gases and the background for the instruments. How the instruments work in theory and what the practical problems may be. What agents' incentives are when they engage in JI or CDM, and how the initiation of the instruments can be organised. The institutional frameworks for JI, CDM and TP are discussed. The report describes how the Kyoto instruments and the Kyoto commitments interact with other instruments and describe distributive effects between countries. It is analysed how the use of CDM may influence the developing countries incentives to participate in the coalition of committed countries. In the concluding chapter some recommendations on the use of JI, TP and CDM are given. The recommendations are a kind of dialog with especially the Norwegian and Swedish reports on tradable permits. Some of the issues described in this main report are analysed in separate working papers. The working papers are collected in an appendix to the main report. (au)

  14. Decentralized enforcement, sequential bargaining, and the clean development mechanism

    Energy Technology Data Exchange (ETDEWEB)

    Hovi, Jon

    2001-07-01

    While there is a vast literature both on international bargaining and on how international agreements can be enforced, very little work has been done on how bargaining and enforcement interact. An important exception is Fearon (1998), who models international cooperation as a two-stage process in which the bargaining process is constrained by a need for decentralized enforcement (meaning that the agreement must be enforced by the parties themselves rather than a third party, such as a court). Using the Clean Development Mechanism as an example, the present paper proposes a different model of this kind of interaction. The model follows Fearon's in so far as we both use the infinitely repeated Prisoners' Dilemma to capture the enforcement phase of the game. However, while Fearon depicts the bargaining stage as a War of Attrition, the present model sees that stage as a sequential bargaining game of the Staahl-Rubinstein type. The implications of the present model are compared both to those of the Staahl-Rubinstein model and to those of the Fearon model. A surprising conclusion is that a need for decentralized enforcement tends to make the bargaining outcome more symmetrical than otherwise. Thus, the impact of bargaining power is actually smaller when the resulting agreement must be enforced by the parties themselves than it is if enforcement is taken care of by a third party. (author)

  15. Clean development mechanism: a way to sustainable waste management in developing countries?

    NARCIS (Netherlands)

    Siebel, M.A.; Rotter, V.S.; Nabende, A.; Gupta, J.

    2013-01-01

    The Clean Development Mechanism established under the Kyoto Protocol allows investors in the developed world to invest in the developing world in return for emission credits. The CDM has two goals—to contribute to the reduction of emissions in the developed countries, and to promote sustainable deve

  16. The Clean Development Mechanism and Sustainable Development in China's Electricity Sector

    Institute of Scientific and Technical Information of China (English)

    Paul A. Steenhof

    2005-01-01

    The Clean Development Mechanism,a flexibility mechanism contained in the Kyoto Protocol, offers China an important tool to attract investment in clean energy technology and processes into its electricity sector. The Chinese electricity sector places centrally in the country's economy and environment, being a significant contributor to the acid rain and air pollution problems that plague many of China's cities and regions, and therefore a focus of many related energy and environmental policies.China's electricity sector has also been the subject of a number of economic analyses that have showed that it contains the highest potential for clean energy investment through the Clean Development Mechanism of any economic sector in China. This mechanism, through the active participation from investors in more industrialized countries, can help alleviate the environmental problems attributable to electricity generation in China through advancing such technology as wind electricity generation, dean coal technology, high efficient natural gas electricity generation, or utilization of coal mine methane. In this context, the Clean Development Mechanism also compliments a range of environmental and energy policies which are strategizing to encourage the sustainable development of China's economy.

  17. Clean development mechanism PDD guidebook: Navigating the pitfalls

    Energy Technology Data Exchange (ETDEWEB)

    Kamel, S. (ed.)

    2005-11-01

    This guidebook is designed to help readers navigate the pitfalls of preparing a Project Design Document (PDD) for Clean Development Mechanism (CDM) projects. The purpose of a PDD is to prepare project information for relevant stakeholders. These stakeholders include the investment community, the Designated Operating Entity (DOE) performing validation of the project, the CDM Executive Board (EB), the Designated National Authorities (DNA) of the involved countries and the local population. The PDD, together with the validation report and the approval letter of the DNA, are the basis for the registration of the project and its recognition as a credible CDM project. The PDD is about the project's design that is, how the project intends to reduce greenhouse gas (GHG) emissions below those levels that would otherwise have been emitted. Each and every CDM project is unique, from the project design to the application of even the simplest baseline methodology. Some of the projects submitted for validation may be very efficient in reducing emissions and score well in terms of economic, social and environmental benefits, but may still not qualify as CDM projects. Experience has shown that the information needed to judge a suitability of a project for the CDM is vast and can take months to assemble. Also, the time required to assemble relevant information increases with the number and diversity of stakeholders involved and the complexity of the information itself. This guidebook is based on a review of all PDDs submitted to DNV for validation. The advice given and the pitfalls described in this guidebook are, therefore, based on day-to-day, hands-on experience and real instances of mistakes made in submissions. In summary, then, this guidebook takes a practical stance: it is concerned with the practical issues of how to get projects through the validation process. It will help those submitting a PDD by: 1) Describing the most common and costly mistakes made in the process

  18. Clean Development Mechanism PDD Guidebook: Navigating the Pitfalls; 2. ed.

    Energy Technology Data Exchange (ETDEWEB)

    2008-04-15

    This guidebook is designed to help readers navigate the pitfalls of preparing a Project Design Document (PDD) for Clean Development Mechanism (CDM) projects. This second edition also aims at helping project developers to navigate the pitfalls of preparing a Monitoring Report and be better prepared to face the verification process. The purpose of a PDD is to prepare project information for relevant stakeholders. These stakeholders include the investment community, the Designated Operating Entity (DOE) performing validation of the project, the CDM Executive Board (EB), the Designated National Authorities (DNA) of the involved countries and the local population. The PDD, together with the validation report and the approval letter of the DNA, are the basis for the registration of the project and its recognition as a credible CDM project. The PDD is about the project's design--that is, how the project intends to reduce greenhouse gas (GHG) emissions below those levels that would otherwise have been emitted1. Each and every CDM project is unique, from the project design to the application of even the simplest baseline methodology. Some of the projects submitted for validation may be very efficient in reducing emissions and score well in terms of economic, social and environmental benefits, but may still not qualify as CDM projects. Experience has shown that the information needed to judge the suitability of a project for the CDM is vast and can take months to assemble. Also, the time required to assemble relevant information increases with the number and diversity of stakeholders involved and the complexity of the information itself. The objective of the verification of emissions reduction is the review and ex post determination of the monitored emission reductions that have occurred during a specified verification period. The verification is about the project's reality--that is, how the project has been implemented as described in the registered PDD and is

  19. Exploring the clean development mechanism: Malaysian case study

    DEFF Research Database (Denmark)

    Pedersen, Anne Rathmann

    2008-01-01

    During 2006 the CDM market in Malaysia became established and by December 2007 a total of 20 Malaysian projects had registered with the CDM Executive Board. The Kyoto Protocol defines the Annex I countries, as countries that are obliged to reduce their greenhouse gas (GHG) emissions and the clean...

  20. The clean development mechanism's contribution to sustainable development: A review of the literature

    DEFF Research Database (Denmark)

    Olsen, Karen Holm

    2007-01-01

    The challenges of how to respond to climate change and ensure sustainable development are currently high on the political agenda among the world's leading nations. The Clean Development Mechanism (CDM) is part of the global carbon market developing rapidly as part of the Kyoto response towards......-reviewed articles and reports from the grey literature. This review of the literature serves to assess the state of knowledge on how the CDM contributes to sustainable development (SD) including poverty alleviation. The main finding of the review is that, left to market forces, the CDM does not significantly...

  1. Initial evaluation of clean development mechanism type projects in developing countries

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    This study assessed a range of existing energy sector development projects that also reduce greenhouse gas emission, such as micro-hydro plants, biogas digesters, solar photovoltaic panels, and energy efficient cooking stoves. The host countries examined were Sri Lanka, Zimbabwe, Peru, Kenya, and Nepal. The aim of this project was to inform international debate on the design of the Clean Development Mechanism (CDM) and its implications for energy use, the environment and reduction of poverty to aid capacity building for the CDM in Developing Countries. (author)

  2. The Clean Development Mechanism: Institutionalizing New Power Relations

    NARCIS (Netherlands)

    B.B.F. Wittneben (Bettina)

    2007-01-01

    textabstractThe differences in the way climate change mitigation projects are facilitated under the Kyoto Protocol as compared to the financial mechanism of the United Nations Framework Convention on Climate Change (UNFCCC) demonstrate institutional change processes that evolved from global climate

  3. Mechanical cleaning of graphene

    NARCIS (Netherlands)

    Goossens, A.M.; Calado, V.E.; Barreiro, A.; Watanabe, K.; Taniguchi, T.; Vandersypen, L.M.K.

    2012-01-01

    Contamination of graphene due to residues from nanofabrication often introduces background doping and reduces electron mobility. For samples of high electronic quality, post-lithography cleaning treatments are therefore needed. We report that mechanical cleaning based on contact mode atomic force mi

  4. Implementing CDM projects. A guidebook to host country legal issues; CDM - Clean Development Mechanism

    Energy Technology Data Exchange (ETDEWEB)

    Curnow, P. (Baker and McKenzie, London (United Kingdom)); Hodes, G. (UNEP Risoe Centre on Energy, Climate and Sustainable Development, DTU, Roskilde (Denmark))

    2009-08-15

    The Clean Development Mechanism (CDM) continues to evolve organically, and many legal issues remain to be addressed in order to maximise its effectiveness. This Guidebook explains through case studies how domestic laws and regulatory frameworks in CDM Host Countries interact with international rules on carbon trading, and how the former can be enhanced to facilitate the implementation and financing of CDM projects. (author)

  5. WP/073 Is the Clean Development Mechanism Effective for Emission Reductions?

    DEFF Research Database (Denmark)

    Huang, Yongfu; He, Jingjing; Tarp, Finn

    This research studies whether the Clean Development Mechanism (CDM) of the Kyoto Protocol achieves its objective of emission reductions in the host countries. It empirically investigates the impacts of CDM projects on CO2 emission reductions for 60 CDM host countries over 2005-10. This research m...

  6. WP/073 Is the Clean Development Mechanism Effective for Emission Reductions?

    DEFF Research Database (Denmark)

    Huang, Yongfu; He, Jingjing; Tarp, Finn

    This research studies whether the Clean Development Mechanism (CDM) of the Kyoto Protocol achieves its objective of emission reductions in the host countries. It empirically investigates the impacts of CDM projects on CO2 emission reductions for 60 CDM host countries over 2005-10. This research...

  7. The Need for a Rights-Based Approach to the Clean Development Mechanism

    DEFF Research Database (Denmark)

    Filzmoser, Eva; Voigt, Juliane; Trunkl, Urska;

    2015-01-01

    of Parties Decision 1/CP.16 which calls upon parties that are implementing programmes under the aegis of the United Nations Framework Convention on Climate Change (UNFCCC) to fully respect human rights in all climate related actions. Despite this recognition, the Clean Development Mechanism (CDM) developed...... highlights the need for CDM to embrace a rights- based focus in its operation. This is followed with conclusion and recommendations....

  8. Can the Clean Development Mechanism attain both cost-effectiveness and sustainable development objectives?

    Energy Technology Data Exchange (ETDEWEB)

    Kolshus, Hans H; Vevatne, Jonas; Torvanger, Asbjoern; Aunan, Kristin

    2001-06-01

    The Clean Development Mechanism (CDM), as defined in the Kyoto Protocol, has two objectives: to promote sustainable development in host developing countries, and to improve global cost-effectiveness by assisting developed countries in meeting their Kyoto targets. The aim of this paper is to explore the background of the CDM and discuss to what extent its current design allows it to achieve its dual objective. The first part of the paper is a literature review that includes descriptions of the flexibility mechanisms under the Kyoto Protocol; the CDM's market potential, and the issues of cost-effectiveness and sustainable development. In the second part of the paper, we discuss to what extent there is a conflict between cost-effectiveness and sustain ability, and whether the two objectives of the CDM can be achieved simultaneously. We develop a set of indicators to evaluate non-carbon benefits of CDM projects on the environment, development, and. equity, and show how these indicators can be used in practice by looking at case studies of CDM project candidates in the energy sector from Brazil and China. We demonstrate that for some CDM projects there is a trade-off between cost-effectiveness, in terms of a low quota price, and a high score on sustain ability indicators. We have reason to believe that the size of the CDM market in some studies is over-estimated since transaction costs and the challenge of promoting sustainable development are not fully accounted for. Also, we find that the proposed set of indicators can be a necessary tool to assure that sustain ability impacts of CDM projects are taken into consideration. (author)

  9. The clean development mechanism as a tool for enhancing substainable development

    Energy Technology Data Exchange (ETDEWEB)

    Yamba, F.D. [Centre for Energy, Environment and Engineering, Lusaka (Zambia)

    1999-08-01

    Francis Yamba presents criteria for assessing the sustainable development aspects of CDM (Clean Development Mechanism) projects. Sustainable development can be seen to consist of financial, economic, environmental, technological and social aspects. Financial sustainability can be assessed by standard indicators and is necessary to attract the private sector to a CDM project. Economic sustainability in the energy sector will involve projects that show a large degree of resilience and lower the burden created by energy sector investments. Environmental sustainability can be viewed at both global and local levels. One way of assessing technological sustainability would be to consider the share of energy output derived from energy conservation and renewable sources. Social sustainability indicators may include access to power supply, energy affordability, employment creation, poverty eradication, and gender equality benefits. Based on Zambia's greenhouse gas emission scenarios, Yamba presents three main areas where CDM projects could lead to sustainable development in Zamiba. These are forest management, household energy use, and use of sugar cane resources. The paper then provides a qualitative assessment of the comparative benefits of these three options from the perspective of sustainability. (EHS)

  10. Governing the Clean Development Mechanism: global rhetoric versus local realities in carbon sequestration projects

    OpenAIRE

    2009-01-01

    Global agreements have proliferated in the past ten years. One of these is the Kyoto Protocol, which contains provisions for emissions reductions by trading carbon through the Clean Development Mechanism (CDM). The CDM is a market-based instrument that allows companies in Annex I countries to offset their greenhouse gas emissions through energy and tree offset projects in the global South. I set out to examine the governance challenges posed by the institutional design of carbon sequestration...

  11. Joint implementation, clean development mechanism and tradable permits. International regulation of greenhouse gases

    DEFF Research Database (Denmark)

    Nielsen, L.; Olsen, K.R.

    2000-01-01

    This report deals with international environmental instruments aimed at a cost-effective reduction of greenhouse gas emissions. More precisely the instruments mentioned in the Kyoto Protocol, namely Joint Implementation (JI), the Clean DevelopmentMechanism (CDM) and Tradable Permits (TP...... of the instruments can be organised. The institutional frameworks for JI, CDM and TP are discussed. The report describes how the Kyoto instruments and the Kyotocommitments interact with other instruments and describe distributive effects between countries. It is analysed how the use of CDM may influence...

  12. Clean Development Mechanism, Programmatic CDM as a means to level the playing field between developing countries : Kenya as a case study country

    NARCIS (Netherlands)

    Taminiau, Job

    2009-01-01

    The Clean Development Mechanism (CDM) is a United Nations mechanism with the dual objective to reduce greenhouse gas emissions as well as to contribute to sustainable develop-ment. CDM shows besides remarkable successes some flaws and shortcomings. Especi

  13. Socioeconomic Factors Affecting Farmers’ Awareness of Clean Development Mechanism Projects: Case of Smallholder Forest Carbon Projects

    Directory of Open Access Journals (Sweden)

    Oscar I. Ayuya

    2011-05-01

    Full Text Available The objective of the study was to identify the socio-economic and institutional factors which influence the level of awareness of Clean Development Mechanism (CDM projects and in so doing to highlight the policy implications for the stakeholders when designing clean development mechanism projects among smallholder farmers. Findings shows that 23% of the farmers were correctly aware of the project and the results of the ordered logit model indicate that age, gender, education level, group membership, existence of tree farming and contact with extension services was found to influence awareness level of smallholder forest Carbon projects. To assist the community to adapt to climate change and produce sufficiently on a sustainable basis and achieve the desired food security under climate change challenges, the study recommends policies to increase awareness of such agro-environmental initiatives and that of extension providers should distinguish their clientele anchored on vital demographic characteristics such as age and gender. If the probability of younger farmers to be aware this initiative is higher, extension communications should be directed to such age group, particularly during initial stages project information dissemination.

  14. Sustainable Development Impacts of Nationally Appropriate Mitigation Actions: An integrated approach to assessment of co-benefits based on experience with the Clean Development Mechanism

    DEFF Research Database (Denmark)

    Olsen, Karen Holm

    Sustainable development priorities provide the context for Nationally Appropriate Mitigation Actions (NAMAs) by developing countries. While methods exist to assess the sustainable development (SD) co-benefits of Clean Development Mechanism (CDM) projects, no approach has yet been developed...

  15. CDM (Clean Development Mechanism) opportunities for the oil and gas sector

    Energy Technology Data Exchange (ETDEWEB)

    Franco, Joana Chiavari [FEEM - Fondazione Eni Enrico Mattei, Milan (Italy). Eni/Agip Group

    2004-07-01

    Due to the broad impact of legislation limiting greenhouse gas emissions and the increasing public awareness concerning the environment, the oil industry has been currently incorporating climate change considerations in its corporate strategy. However, compliance in the carbon constrained economy does not merely represent a cost issue; it also represents an opportunity. Projects developed under the Clean Development Mechanism (CDM) in particular represent an incentive both for companies and governments to invest in emission reduction projects in developing countries and earn carbon credits, while promoting sustainable development. The oil industry is characterized by a high emission reduction potential and is able to deliver to the market an amount of credits which is by far higher than the amount that most projects developers are able to offer. However some critical issues, such as the current interpretation of the additionally concept, may represent a barrier for the full utilization of such mechanism, particularly regarding petroleum-sector projects, thus reducing the benefits the CDM can actually produce. Considering that a very large number of CDM projects may be needed for the implementation of a successful climate policy, the engagement of the oil industry on the Kyoto mechanisms is very important and auspicial. (author)

  16. Renewable Energy Investment in Emerging Markets: Evaluating Improvements to the Clean Development Mechanism

    Directory of Open Access Journals (Sweden)

    Amy Tang

    2014-06-01

    Full Text Available In the past, industrialized countries have invested in or financed numerous renewable energy projects in developing countries, primarily through the Clean Development Mechanism (CDM of the Kyoto Protocol. However, critics have pointed to its bureaucratic structure, problems with additionality and distorted credit prices as ill-equipped to streamline renewable energy investment. In this paper, we simulate the impact of policy on investment decisions on whether or not to invest in wind energy infrastructure in India, Brazil and China. Data from 2,578 past projects as well as literature on investor behaviour is used to inform the model structure and parameters. Our results show that the CDM acts differently in each country and reveal that while streamlining the approval process and reconsidering additionality can lead to non-trivial increase in total investment, stabilizing policy and decreasing investment risk will do the most to spur investment.

  17. Emission Baselines for Clean Development Mechanism Projects: Residential Heating Case in Beijing

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    To explore emission baseline, technically the most difficult issue for Clean Development Mechanism (CDM) project development, as well as to examine whether CDM is a possible way to help Beijing restructure its heating energy consumption, this paper conducts a CDM baseline case study on residential heating in Beijing. Based on investigation, energy consumption forecast and economic analysis of future technology options, the technology benchmark and site-specific baselines for both retrofit projects and new heating projects have been discussed. The results indicate that fuel switching from coal to natural gas can meet the additionality criteria in many cases and will be the main type of CDM project. In addition, it also proves that the technology benchmark and the case-by-case baseline setting approach are applicable for future CDM cooperation projects on heating in Beijing.

  18. Financing the clean development mechanism through debt-for-efficiency swaps? Case study evidence from a Uruguayan wind farm project

    DEFF Research Database (Denmark)

    Cassimon, Danny; Prowse, Martin; Essers, Dennis

    2011-01-01

    As one of Kyoto’s three flexibility mechanisms for reducing the cost of compliance, the Clean Development Mechanism (CDM) allows the issuance of Certified Emission Reduction (CER) credits from offset projects in non-Annex I countries. Whilst much attention has focused on the widespread use...

  19. Risks and chances of combined forestry and biomass projects under the Clean Development Mechanism

    Energy Technology Data Exchange (ETDEWEB)

    Dutschke, Michael; Kapp, Gerald; Lehmann, Anna; Schaefer, Volkmar (Hamburg Inst. International Economics (Germany))

    2006-06-15

    The Clean Development Mechanism (CDM) aims at reducing greenhouse gas (GHG) emissions, while at the same time taking up CO{sub 2} from the atmosphere in vegetation by means of afforestation and reforestation. In spite of these options being complementary, rules and modalities for both project classes are being treated separately in the relevant decisions by the Conference of the Parties to the UN Framework Convention on Climate Change. The present study reviews the state of bioenergy use in developing countries, modalities and procedures under the CDM, and the potential for transaction cost reduction in climate mitigation projects. There are four potential types of combinations in the matrix between small-scale - large-scale / afforestation and reforestation - bioenergy activities. We develop criteria for assessing sustainable development benefits and present an example project for each of the potential project types. We find that the individual risks of single-category projects do not increase when combining project categories and that each combination holds potential for integrated sustainability benefits. Risks for local livelihoods do increase with project size, but a transparent, participatory planning phase is able to counterbalance smallholders' lack of negotiation power. Further research will have to develop concrete project examples and blueprints with approved CDM methodologies, thereby decreasing transaction costs and risk for all potential project partners. (au)

  20. How can the Clean Development Mechanism contribute to better air quality?

    Energy Technology Data Exchange (ETDEWEB)

    Bakker, S.J.A. [ECN Policy Studies, Petten (Netherlands)

    2009-06-15

    Air pollutants and greenhouse gases are to a large extent emitted by the same sources, notably in the industry, transport and residential sectors. However, climate change mitigation is a global issue and is mostly driven by national and international policy. Local governments are in general more interested in improving urban air quality, which is posing serious health hazards across the globe. The Clean Development Mechanism (CDM) was designed to reduce greenhouse gas emissions, helping industrialised countries to achieve their targets under the Kyoto Protocol while contributing to sustainable development in developing countries. As of January 2009 over 4000 projects are in the pipeline. The CDM could be used by local governments and the private sector to finance projects that contribute to both climate change mitigation and better air quality. However, CDM projects in particularly the transport sector face a number of barriers. We identify the most important issues for such projects, as well as the lessons learnt and some recommendations based on four case studies in Asian cities related to biofuels and bus rapid transit systems. The main conclusions is that successful implementation of CDM projects beneficial for urban air quality depends on the applicability of approved CDM methodologies, the strong cooperation between project developers and local authorities, and the availability of data.

  1. Clean development mechanism and off-grid small-scale hydropower projects: evaluation of additionality

    Energy Technology Data Exchange (ETDEWEB)

    Tanwar, N. [Punjab Engineering College, Chandigarh (India). Department of Civil Engineering

    2007-01-15

    The global climate change mitigation policies and their stress on sustainable development have made electrification of rural mountainous villages, using small hydro, an attractive destination for potential clean development mechanism (CDM) projects. This invariably involves judging the additionality of such projects. The paper suggests a new approach to judge the additionality of such stand-alone small hydropower projects. This has been done by breaking up additionality into two components: external and local. The external additionality is project developer dependent. For determining the local additionality, the paper takes into account the probability of a village getting electrified over a period of time, which is kept equal to the possible crediting period. This is done by defining an electrification factor (EF) whose value depends on the degree of isolation, financial constraints and institutional constraints encountered while electrifying a mountainous village. Using this EF, the additionality of a CDM project can be judged in a much easier and accurate way. The paper is based on the data and inputs gathered during site visits to many isolated villages located in the eastern Indian Himalayas. (author)

  2. General equilibrium effects of a supply side GHG mitigation option under the Clean Development Mechanism.

    Science.gov (United States)

    Timilsina, Govinda R; Shrestha, Ram M

    2006-09-01

    The Clean Development Mechanism (CDM) under the Kyoto Protocol to the United Nations Framework Convention on Climate Change is considered a key instrument to encourage developing countries' participation in the mitigation of global climate change. Reduction of greenhouse gas (GHG) emissions through the energy supply and demand side activities are the main options to be implemented under the CDM. This paper analyses the general equilibrium effects of a supply side GHG mitigation option-the substitution of thermal power with hydropower--in Thailand under the CDM. A static multi-sector general equilibrium model has been developed for the purpose of this study. The key finding of the study is that the substitution of electricity generation from thermal power plants with that from hydropower plants would increase economic welfare in Thailand. The supply side option would, however, adversely affect the gross domestic product (GDP) and the trade balance. The percentage changes in economic welfare, GDP and trade balance increase with the level of substitution and the price of certified emission reduction (CER) units.

  3. FEASIBILITY AND FINANCIAL ISSUES OF CLEAN PROJECT DEVELOPMENT MECHANISM IN ARGENTINA

    Directory of Open Access Journals (Sweden)

    García Fronti, Inés

    2013-01-01

    Full Text Available The objective of the research is to determine the current status and perspectives presented in Argentina in 2011 for different stakeholders regarding the development, execution and implementation of projects of clean development mechanism (CDM under the Kioto Protocol, with emphasis on the analysis of accounting issues.In the Argentinean research there is an analysis of the accounting issues under discussion and -taking as theirtory the Brazilian study mentioned- has surveyed and interviewed stakeholders belonging to government agencies, professional bodies such as councils accounting professionals in economics from different jurisdictions, academics, consultants and companies that deal or CDM projects plan to address issues relating to general and their views on potential regulations from bodies of the accounting profession and/or governmental and motivation of business and accounting issues of CDM projects such as moments of recognition of accounting entries and the different forms of the same recognition. The results showed that knowledge on the subject of stakeholders is initial but is possible an important increase in the future, accompanied by the development in Argentina of such projects.

  4. Potential of wind power projects under the Clean Development Mechanism in India

    Directory of Open Access Journals (Sweden)

    Michaelowa Axel

    2007-07-01

    Full Text Available Abstract Background So far, the cumulative installed capacity of wind power projects in India is far below their gross potential (≤ 15% despite very high level of policy support, tax benefits, long term financing schemes etc., for more than 10 years etc. One of the major barriers is the high costs of investments in these systems. The Clean Development Mechanism (CDM of the Kyoto Protocol provides industrialized countries with an incentive to invest in emission reduction projects in developing countries to achieve a reduction in CO2 emissions at lowest cost that also promotes sustainable development in the host country. Wind power projects could be of interest under the CDM because they directly displace greenhouse gas emissions while contributing to sustainable rural development, if developed correctly. Results Our estimates indicate that there is a vast theoretical potential of CO2 mitigation by the use of wind energy in India. The annual potential Certified Emissions Reductions (CERs of wind power projects in India could theoretically reach 86 million. Under more realistic assumptions about diffusion of wind power projects based on past experiences with the government-run programmes, annual CER volumes by 2012 could reach 41 to 67 million and 78 to 83 million by 2020. Conclusion The projections based on the past diffusion trend indicate that in India, even with highly favorable assumptions, the dissemination of wind power projects is not likely to reach its maximum estimated potential in another 15 years. CDM could help to achieve the maximum utilization potential more rapidly as compared to the current diffusion trend if supportive policies are introduced.

  5. Development of test protocols for effectiveness testing and working mechanisms for shoreline cleaning agents

    Energy Technology Data Exchange (ETDEWEB)

    Ramstad, S.; Hansen, B.H.; Daling, P.; Frenzel, M.; Oksenvag, J.H.C. [SINTEF Marine Environmental Technology, Trondheim (Norway); Merlin, F. [Cedre, Brest Cedex (France)

    2009-07-01

    One major spill and smaller accidental spills have occurred off the Norwegian Coast since the petroleum industry began operation in the area over 50 years ago. To date, no oil from these offshore spills has reached the coastal area, but with the expansion of the oil industry on the Norwegian continental shelf, there is a need for an effective shoreline cleanup response contingency. In general, shoreline cleanup operations are performed over a very long time period with rather low efficacy and generation of large quantities of waste materials. For these reasons, there is a need to develop and implement new and more cost-effective shore line protection, cleanup techniques and strategies. The primary purpose of this work was to develop test protocols for effectiveness quantification of shoreline cleaning agents (SCAs) to better understand their working mechanisms and effectiveness in treating oil-contaminated shorelines. A stepwise test regime was recommended to the Norwegian Climate and Pollution Agency. The test regime considers product ecotoxicology along with dispersibility and effectiveness. Its aim is to contribute to a better understanding for tactical use of these products in different spill scenarios. The paper reviewed non-mechanical in-situ shoreline cleanup techniques; shoreline washing and dispersing agents; bioremediation agents; ecotoxicity testing; dispersibility testing of SCAs; Warren Spring Laboratory (WSL) test of shoreline dispersants; wash-out effectiveness testing of shoreline dispersants on oil-contaminated bedrock using the simulated shoreline system (SSS); wave energy; oil type and soak time; and exposure period. Guidelines for the effective use of the proposed products were recommended based on data from these studies. 9 refs., 13 figs.

  6. The financial attractiveness assessment of large waste management projects registered as clean development mechanism

    Energy Technology Data Exchange (ETDEWEB)

    Bufoni, André Luiz, E-mail: bufoni@facc.ufrj.br [Energy Planning Program, Universidade Federal do Rio de Janeiro PPE/COPPE/UFRJ (Brazil); Oliveira, Luciano Basto [International Virtual Institute of Global Changes IVIG/COPPE/UFRJ (Brazil); Rosa, Luiz Pinguelli [Energy Planning Program, Universidade Federal do Rio de Janeiro PPE/COPPE/UFRJ (Brazil)

    2015-09-15

    Highlights: • Projects are not financially attractive without registration as CDMs. • WM benchmarks and indicators are converging and reducing in variance. • A sensitivity analysis reveal that revenue has more of an effect on the financial results. • Results indicate that an extensive database would reduce WM project risk and capital costs. • Disclosure standards would make information more comparable worldwide. - Abstract: This study illustrates the financial analyses for demonstration and assessment of additionality presented in the project design (PDD) and enclosed documents of the 431 large Clean Development Mechanisms (CDM) classified as the ‘waste handling and disposal sector’ (13) over the past ten years (2004–2014). The expected certified emissions reductions (CER) of these projects total 63.54 million metric tons of CO{sub 2}eq, where eight countries account for 311 projects and 43.36 million metric tons. All of the projects declare themselves ‘not financially attractive’ without CER with an estimated sum of negative results of approximately a half billion US$. The results indicate that WM benchmarks and indicators are converging and reducing in variance, and the sensitivity analysis reveals that revenues have a greater effect on the financial results. This work concludes that an extensive financial database with simple standards for disclosure would greatly diminish statement problems and make information more comparable, reducing the risk and capital costs of WM projects.

  7. Improving or Disproving Sustainable Development in the Clean Development Mechanism in the Midst of a Financial Crisis?

    Directory of Open Access Journals (Sweden)

    Angus Macdonald

    2010-06-01

    Full Text Available The Clean Development Mechanism (CDM of the Kyoto Protocol is a dual purpose mechanism aiming to reduce carbon emissions and promote sustainable development. However the CDM, as a market mechanism, seems incapable of fulfilling this latter purpose. Bui lding on the dichotomy between market liberalism and sustainable development as identified by D.M. Driesen, this paper argues that the CDM has become a schizophrenic mechanism trying to achieve two mutually exclusive aims. The paper discusses options for improving sustainable development in the CDM, but concludes these options are either impractical or impossible to pursue. The 'development dividend' (as per A. Cosbey, et al is likely to forever be in arrears. The CDM should explicitly acknowledge its sustainable development failings. This brings into question the CDM's very existence. The paper also comments on the effect the financial crisis might have on the carbon market, so crucial for the CDM. The article suggests that the financial crisis will make it even more difficult for the CDM to pursue its sustainable development aim.

  8. CDM (Clean development mechanism) like instrument for sustainable development?; MDL (mecanismo de desenvolvimento limpo) como instrumento para o desenvolvimento sustentavel?

    Energy Technology Data Exchange (ETDEWEB)

    Cunha, Kamyla Borges da; Walter, Arnaldo Cesar Silva; Varella, Fabiana Karla de Oliveira; Streb, Cleci Schalemberger [Universidade Estadual de Campinas (UNICAMP), Campinas, SP (Brazil). Fac. de Engenharia Mecanica. Curso de Pos-Graduaco em Planejamento de Sistemas Energeticos], e-mail: kamyla@fem.unicamp.br

    2004-07-01

    The intensification of the greenhouse effect, caused mainly by the anthropogenic activities, such as the intensive use of fossil fuels, reveals itself as a challenge to governments and international organizations. The institution of an international legal framework, resulted from the implementation of the United Nations Framework Convention on Climate Change and the Kyoto Protocol, is allowing the development of some mitigation instruments, such as the clean development mechanism (CDM). The article's purpose is to assess the social and economic aspects that are leading to the climate change process and to analyze the instruments foreseen in the international legal system to face this global concern, in special, the CDM as a tool to achieve sustainable development practices. In this way, the authors aims to demonstrate the connection and interdependence between those instruments and the sustainable development. (author)

  9. Poverty alleviation and environmental restoration using the clean development mechanism: A case study from Humbo, Ethiopia.

    Science.gov (United States)

    Brown, Douglas R; Dettmann, Paul; Rinaudo, Tony; Tefera, Hailu; Tofu, Assefa

    2011-08-01

    Poverty, hunger and demand for agricultural land have driven local communities to overexploit forest resources throughout Ethiopia. Forests surrounding the township of Humbo were largely destroyed by the late 1960s. In 2004, World Vision Australia and World Vision Ethiopia identified forestry-based carbon sequestration as a potential means to stimulate community development while engaging in environmental restoration. After two years of consultation, planning and negotiations, the Humbo Community-based Natural Regeneration Project began implementation--the Ethiopian organization's first carbon sequestration initiative. The Humbo Project assists communities affected by environmental degradation including loss of biodiversity, soil erosion and flooding with an opportunity to benefit from carbon markets while reducing poverty and restoring the local agroecosystem. Involving the regeneration of 2,728 ha of degraded native forests, it brings social, economic and ecological benefits--facilitating adaptation to a changing climate and generating temporary certified emissions reductions (tCERs) under the Clean Development Mechanism. A key feature of the project has been facilitating communities to embrace new techniques and take responsibility for large-scale environmental change, most importantly involving Farmer Managed Natural Regeneration (FMNR). This technique is low-cost, replicable, and provides direct benefits within a short time. Communities were able to harvest fodder and firewood within a year of project initiation and wild fruits and other non-timber forest products within three years. Farmers are using agroforestry for both environmental restoration and income generation. Establishment of user rights and local cooperatives has generated community ownership and enthusiasm for this project--empowering the community to more sustainably manage their communal lands.

  10. Poverty Alleviation and Environmental Restoration Using the Clean Development Mechanism: A Case Study from Humbo, Ethiopia

    Science.gov (United States)

    Brown, Douglas R.; Dettmann, Paul; Rinaudo, Tony; Tefera, Hailu; Tofu, Assefa

    2011-08-01

    Poverty, hunger and demand for agricultural land have driven local communities to overexploit forest resources throughout Ethiopia. Forests surrounding the township of Humbo were largely destroyed by the late 1960s. In 2004, World Vision Australia and World Vision Ethiopia identified forestry-based carbon sequestration as a potential means to stimulate community development while engaging in environmental restoration. After two years of consultation, planning and negotiations, the Humbo Community-based Natural Regeneration Project began implementation—the Ethiopian organization's first carbon sequestration initiative. The Humbo Project assists communities affected by environmental degradation including loss of biodiversity, soil erosion and flooding with an opportunity to benefit from carbon markets while reducing poverty and restoring the local agroecosystem. Involving the regeneration of 2,728 ha of degraded native forests, it brings social, economic and ecological benefits—facilitating adaptation to a changing climate and generating temporary certified emissions reductions (tCERs) under the Clean Development Mechanism. A key feature of the project has been facilitating communities to embrace new techniques and take responsibility for large-scale environmental change, most importantly involving Farmer Managed Natural Regeneration (FMNR). This technique is low-cost, replicable, and provides direct benefits within a short time. Communities were able to harvest fodder and firewood within a year of project initiation and wild fruits and other non-timber forest products within three years. Farmers are using agroforestry for both environmental restoration and income generation. Establishment of user rights and local cooperatives has generated community ownership and enthusiasm for this project—empowering the community to more sustainably manage their communal lands.

  11. Mechanisms of single bubble cleaning.

    Science.gov (United States)

    Reuter, Fabian; Mettin, Robert

    2016-03-01

    The dynamics of collapsing bubbles close to a flat solid is investigated with respect to its potential for removal of surface attached particles. Individual bubbles are created by nanosecond Nd:YAG laser pulses focused into water close to glass plates contaminated with melamine resin micro-particles. The bubble dynamics is analysed by means of synchronous high-speed recordings. Due to the close solid boundary, the bubble collapses with the well-known liquid jet phenomenon. Subsequent microscopic inspection of the substrates reveals circular areas clean of particles after a single bubble generation and collapse event. The detailed bubble dynamics, as well as the cleaned area size, is characterised by the non-dimensional bubble stand-off γ=d/Rmax, with d: laser focus distance to the solid boundary, and Rmax: maximum bubble radius before collapse. We observe a maximum of clean area at γ≈0.7, a roughly linear decay of the cleaned circle radius for increasing γ, and no cleaning for γ>3.5. As the main mechanism for particle removal, rapid flows at the boundary are identified. Three different cleaning regimes are discussed in relation to γ: (I) For large stand-off, 1.8substrate and remove particles without significant contact of the gas phase. (II) For small distances, γsubstrate are driven by the jet impact with its subsequent radial spreading, and by the liquid following the motion of the collapsing and rebounding bubble wall. Both flows remove particles. Their relative timing, which depends sensitively on the exact γ, appears to determine the extension of the area with forces large enough to cause particle detachment. (III) At intermediate stand-off, 1.1substrate, but acts with cleaning mechanisms similar to an effective small γ collapse: particles are removed by the jet flow and the flow induced by the bubble wall oscillation. Furthermore, the observations reveal that the extent of direct bubble gas phase contact to the solid is partially smaller than the

  12. Optimal energy options under Clean Development Mechanism: Renewable energy projects for sustainable development and carbon emission reduction

    Science.gov (United States)

    Gilau, Asmerom M.

    This dissertation addresses two distinct objectives; designing cost-effective renewable energy powered projects including seawater reverse osmosis (SWRO), aquaculture, and ice-making plant, and analyzing the cost-effectiveness of these projects in achieving low abatement costs and promoting sustainable developments under the Clean Development Mechanism. The results of SWRO analysis show that a wind powered system is the least expensive and a PV powered system the most expensive, with finished water costs of about 0.50 /m3 and 1.00 /m3, respectively. By international standards, these costs are competitive. The results of renewable energy powered commercial tilapia production indicate that a wind-diesel system has high potential for intensive tilapia production as well as carbon dioxide emission reductions. The study also investigates aeration failures in renewable energy powered tilapia production systems. With respect to the ice-making plant, unlike previous studies which consider nighttime operation only, we have found that a nighttime PV powered ice-making system is more expensive (1/kWh) than daytime ice-making system (0.70/kWh). Our optimal energy options analysis at project scale which includes SWRO, ice-making plant and household energy consumption for about 100 households shows that compared to diesel only energy option, PV-D, W-D, and PV-W-D hybrids are very cost-effective energy options. Moreover, energy options with high levels of renewable energy including 100% renewables have the lowest net present cost and they are already cost-effective without CDM. On the other hand, while the removal of about 87% carbon dioxide emissions could be achieved at negative cost, initial investment could increase by a factor of 40, which is one of the primary barriers hindering wider renewable energy applications in developing countries. Thus in order to increase developing countries' participation in the carbon market, CDM policy should shift from a purely market oriented

  13. Study on the Evolution Mechanism and Development Forecasting of China’s Power Supply Structure Clean Development

    Directory of Open Access Journals (Sweden)

    Xiaohua Song

    2017-02-01

    Full Text Available The clean development of China’s power supply structure has become a crucial strategic problem for the low-carbon, green development of Chinese society. Considering the subsistent developments of optimized allocation of energy resources and efficient utilization, the urgent need to solve environmental pollution, and the continuously promoted power market-oriented reform, further study of China’s power structure clean development has certain theoretical value. Based on the data analysis, this paper analyzes the key factors that influence the evolution process of the structure with the help of system dynamics theory and carries out comprehensive assessments after the construction of the structure evaluation system. Additionally, a forecasting model of the power supply structure development based on the Vector Autoregressive Model (VAR has been put forward to forecast the future structure. Through the research of policy review and scenario analysis, the paths and directions of structure optimization are proposed. In this paper, the system dynamics, vector autoregressive model (VAR, policy mining, and scenario analysis methods are combined to systematically demonstrate the evolution of China’s power structure, and predict the future direction of development. This research may provide a methodological and practical reference for the analysis of China’s power supply structure optimization development and for theoretical studies.

  14. The clean development mechanism: Assessment of experience and expectations for the future

    Energy Technology Data Exchange (ETDEWEB)

    Maosheng, D.

    2009-07-01

    With the aim of promoting further the CDM's objectives, now is the time to look back and review the performance of the international rules and to consider possible improvements to the mechanism for the period after 2012. To this end, the paper provides an overview of the requirements for CDM projects by the Kyoto Protocol and the Marrakesh Accords. It then assesses the performance of CDM projects based on current practice regarding six aspects: emission reductions, sustainable development, environmental impact, technology transfer, geographical distribution and transparency, efficiency, and the effectiveness of the system in operation. Expectations for the post-2012 CDM regime are proposed. Finally, proposals on the scaling-up of the CDM are discussed and some initial thoughts considered. (au)

  15. Feasibility of Applying Clean Development Mechanism and GHGs Emission Reductions in the Gold Mining Industry: A Case of Thailand

    Science.gov (United States)

    Kittipongvises, Suthirat

    2015-12-01

    There is presently overwhelming scientific consensus that global climate change is indeed occurring, and that human activities are the primary driver. An increasingly resource and carbon constrained world will continue to pose formidable challenges to major industries, including mining. Understanding the implications of climate change mitigation for the mining industry, however, remains limited. This paper presents the results of a feasibility study on the implementation of a clean development mechanism and greenhouse gases (GHGs) emission reductions in the gold mining industry. It draws upon and extends the analysis of a case study conducted on gold mining operations in Thailand. The results from the case study indicated that total GHGs emissions by company A were approximately 36,886 tons carbon dioxide equivalents (tCO2e) per annual gold production capacity that meet the eligibility criteria for small-scaled clean development mechanism (CDM) projects. The electrostatic separation process was found to release the lowest amount of GHGs, whereas comminution (i.e. crushing and grinding) generated the highest GHGs emissions. By scope, the emission from purchased electricity (scope 2) is the most significant source. Opportunities for CDM projects implementation in the gold mining sector can be found in employing energy efficiency measures. Through innovation, some technical efficiency and technological development in gold processing (i.e. high pressure grinding rolls (HPGR), vertical roller mills (VRM), gravity pre-concentration and microwave heating technologies) that have the potential to reduce energy use and also lower carbon footprint of the gold mining were further discussed. The evidence reviews found that HPGR and VRM abatement technologies have shown energy and climate benefits as electricity savings and CO2 reduction of about 8-25.93 kWh/ton ore processed and 1.8-26.66 kgCO2/ton ore processed, respectively. Implications for further research and practice were

  16. Feasibility of Applying Clean Development Mechanism and GHGs Emission Reductions in the Gold Mining Industry: A Case of Thailand

    Directory of Open Access Journals (Sweden)

    Kittipongvises Suthirat

    2015-12-01

    Full Text Available There is presently overwhelming scientific consensus that global climate change is indeed occurring, and that human activities are the primary driver. An increasingly resource and carbon constrained world will continue to pose formidable challenges to major industries, including mining. Understanding the implications of climate change mitigation for the mining industry, however, remains limited. This paper presents the results of a feasibility study on the implementation of a clean development mechanism and greenhouse gases (GHGs emission reductions in the gold mining industry. It draws upon and extends the analysis of a case study conducted on gold mining operations in Thailand. The results from the case study indicated that total GHGs emissions by company A were approximately 36,886 tons carbon dioxide equivalents (tCO2e per annual gold production capacity that meet the eligibility criteria for small-scaled clean development mechanism (CDM projects. The electrostatic separation process was found to release the lowest amount of GHGs, whereas comminution (i.e. crushing and grinding generated the highest GHGs emissions. By scope, the emission from purchased electricity (scope 2 is the most significant source. Opportunities for CDM projects implementation in the gold mining sector can be found in employing energy efficiency measures. Through innovation, some technical efficiency and technological development in gold processing (i.e. high pressure grinding rolls (HPGR, vertical roller mills (VRM, gravity pre-concentration and microwave heating technologies that have the potential to reduce energy use and also lower carbon footprint of the gold mining were further discussed. The evidence reviews found that HPGR and VRM abatement technologies have shown energy and climate benefits as electricity savings and CO2 reduction of about 8-25.93 kWh/ton ore processed and 1.8-26.66 kgCO2/ton ore processed, respectively. Implications for further research and

  17. Is a Clean Development Mechanism project economically justified? Case study of an International Carbon Sequestration Project in Iran.

    Science.gov (United States)

    Katircioglu, Salih; Dalir, Sara; Olya, Hossein G

    2016-01-01

    The present study evaluates a carbon sequestration project for the three plant species in arid and semiarid regions of Iran. Results show that Haloxylon performed appropriately in the carbon sequestration process during the 6 years of the International Carbon Sequestration Project (ICSP). In addition to a high degree of carbon dioxide sequestration, Haloxylon shows high compatibility with severe environmental conditions and low maintenance costs. Financial and economic analysis demonstrated that the ICSP was justified from an economic perspective. The financial assessment showed that net present value (NPV) (US$1,098,022.70), internal rate of return (IRR) (21.53%), and payback period (6 years) were in an acceptable range. The results of the economic analysis suggested an NPV of US$4,407,805.15 and an IRR of 50.63%. Therefore, results of this study suggest that there are sufficient incentives for investors to participate in such kind of Clean Development Mechanism (CDM) projects.

  18. Estimation and diminution of CO2 emissions by clean development mechanism option at power sector in Oman

    Energy Technology Data Exchange (ETDEWEB)

    Singh Solanki, Parmal; Sarma Mallela, Venkateswara [Caledonian (University) College of Engineering, Muscat (Oman); Zhou, Chengke [Glasgow Caledonian University, Glasgow, Scotland (United Kingdom)

    2013-07-01

    Carbon dioxide (CO2) is one of the major pollutants among greenhouse gases emitted by fossil fuel based power plants and responsible for environmental tribulations. Therefore diminution of carbon dioxide level by Clean Development Mechanism (CDM) is now serious concern worldwide. This paper evaluates the emission factors of national electric grid in Oman and proposes a wind energy based CDM project to diminish the CO2 emissions. Estimations show that operating margin emission factors of national grid during five years lies in the range of 0.74 to 0.69 kg CO2/kWh. Further, proposed CDM project revealed the annual baseline emissions reduction of 45552 ton CO2 and able to earn the revenue of US$ 61.49 million by certify emission reductions in the first crediting period of project. Paper also critically analyse the opportunities for CDM project, its lucrative aspect, barrier and challenges.

  19. Environmentally Sustainable Solution for a Gas Turbine Upgrade Clean Development Mechanism Application in a Non-Annex I Country

    Energy Technology Data Exchange (ETDEWEB)

    Becker, Volker; Wolf, Markus; Fahrer, Roland; Brandett, Joergen; Hess, Stephen

    2007-07-01

    ALSTOM Power Service delivers solutions not only to recover degradation, but also to increase the performance and efficiency of the installed global power generation fleet. Such performance improvements also reduce greenhouse gases and particularly CO2 emissions. The mechanisms of the Kyoto Protocol promote the implementation of CO2-reducing state-of-the-art technologies to developing and emerging economies. ALSTOM, having installed the world's largest power generation fleet, wants to make use of the Clean Development Mechanism (CDM) to make technology implementation economically attractive for non-Annex I countries. This paper gives an overview and outlook for environmental mechanisms and technologies, the value proposition and some experience in pioneering a CDM project with a gas turbine upgrade in a non-Annex I country. It is shown that in a crediting period of 10 years 3 million tons of CO2eq can be saved on a mid-sized power plant. Assuming a price of euro 8 per ton of CO2eq for Certified Emission Reductions this would lead to an annual revenue of 20% of the initial implementation cost, representing a very attractive business case for the plant operator. The described CDM application can be a decisive factor for proceeding with a fuel switch or an upgrade. The revenues earned from emission trading enables the plant operator to make the investment to reduce Kyoto-relevant emissions.

  20. Transportation and greenhouse gas emissions : exploring opportunities for the Clean Development Mechanism in Chile : highlighting project conclusions

    Energy Technology Data Exchange (ETDEWEB)

    Browne, J. [International Inst. for Sustainable Development, Winnipeg, MB (Canada); Sanhueza, E. [Climate Change and Development Consultants (Chile); Winkelman, S. [Center for Clean Air Policy, Washington, DC (United States)

    2004-12-01

    A project was launched in 2002 by the International Institute for Sustainable Development to promote sustainable development in Chile's transportation sector. This initiative was accomplished by applying the Clean Development Mechanism (CDM) which allows public or private businesses to invest in greenhouse gas mitigating activities in developing countries and earn abatement credits. In Chile, transportation is the largest source of energy-related carbon dioxide emissions, and they are expected to double by 2020 if mitigation measures are not put in place. CDM offers the potential to increase transportation funding, enhance local planning and expand technology transfer opportunities. This report highlights a bicycle infrastructure project, a project that promotes energy efficiency in public transit, and a location efficiency project in which land use patterns influence travel behaviour and transportation emissions. In 2004, the Government of Chile hosted an international workshop on transportation and the CDM which revealed that demand-side management measures, such as public transit improvement, are necessary to slow the rapid increase in transportation emissions.

  1. Conversion of carbon dioxide to valuable petrochemicals:An approach to clean development mechanism

    Institute of Scientific and Technical Information of China (English)

    Farnaz Tahriri Zangeneh; Saeed Sahebdelfar; Maryam Takht Ravanchi

    2011-01-01

    The increase of atmospheric carbon dioxide and the global warming due to its greenhouse effect resulted in worldwide concerns. On the other hand, carbon dioxide might be considered as a valuable and renewable carbon source. One approach to reduce carbon dioxide emissions could be its capture and recycle via transformation into chemicals using the technologies in C1 chemistry. Despite its great interest, there are difficulties in CO2 separation on the one hand, and thermodynamic stability of carbon dioxide molecule rendering its chemical activity low on the other hand. Carbon dioxide has been already used in petrochemical industries for production of limited chemicals such as urea.The utilization of carbon dioxide does not necessarily involve development of new processes, and in certain processes such as methanol synthesis and methane steam reforming, addition of CO2 into the feed results in its utilization and increases carbon efficiency. In other cases,modifications in catalyst and/or processes, or even new catalysts and processes, are necessary. In either case, catalysis plays a crucial role in carbon dioxide conversion and effective catalysts are required for commercial realization of the related processes. Technologies for CO2 utilization are emerging after many years of research and development efforts.

  2. Benefits of clean development mechanism application on the life cycle assessment perspective: a case study in the palm oil industry.

    Science.gov (United States)

    Chuen, Onn Chiu; Yusoff, Sumiani

    2012-03-01

    This study performed an assessment on the beneficial of the Clean Development Mechanism (CDM) application on waste treatment system in a local palm oil industry in Malaysia. Life cycle assessment (LCA) was conducted to assess the environmental impacts of the greenhouse gas (GHG) reduction from the CDM application. Calculations on the emission reduction used the methodology based on AM002 (Avoided Wastewater and On-site Energy Use Emissions in the Industrial Sector) Version 4 published by United Nations Framework Convention on Climate Change (UNFCC). The results from the studies showed that the introduction of CDM in the palm oil mill through conversion of the captured biogas from palm oil mill effluent (POME) treatment into power generation were able to reduce approximate 0.12 tonnes CO2 equivalent concentration (tCO2e) emission and 30 kW x hr power generation per 1 tonne of fresh fruit bunch processed. Thus, the application of CDM methodology on palm oil mill wastewater treatment was able to reduce up to 1/4 of the overall environment impact generated in palm oil mill.

  3. Status of implementation of the clean development mechanism in Brazil; Estado de implementacao do mecanismo de desenvolvimento limpo no Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Cunha, Kamyla Borges da [Instituto de Energia e Meio Ambiente, Sao Paulo, SP (Brazil)], e-mail: kamyla_energia@terra.com.br; Walter, Arnaldo [Universidade Estadual de Campinas (FEM/UNICAMP), SP (Brazil). Fac. de Engenharia Mecanica. Programa de Pos-Graduacao em Planejamento de Sistemas Energeticos; Rei, Fernando Fernandes [Centro Universitario SENAC, Sao Paulo, SP (Brazil). Curso de Mestrado em Gestao Integrada

    2006-07-01

    Defined in the article 12 from Kyoto Protocol, the Clean Development Mechanism (CDM) was created as a market instrument. As a consequence, CDM projects distribution is becoming unequal among the regions of the globe and also among project activities types. Brazil is the second in number of projects and the third in emission reductions, but the market aspect of CDM is a factor that influences the domestic dynamics of CDM. In this way, the objective of this paper is to evaluate in which way the regional and technological differences between CDM projects are replicable in the national context. In order to meet this aim, it was assessed all Brazilian CDM projects that were submitted to UN until March 10{sup th} 2006. As a result, it could be identified that there is not any land use, land-use change and forestry (LULUCF CDM) projects, besides the Brazilian potential in this field, it could be noticed that the most part of Brazilian CDM projects is focused in renewable energy promotion, such as cogeneration with biomass and small hydro power plants and that there is a small number of projects related to energy efficiency. In addition, it was verified wide differences regarding regional distribution of projects and the predominance of unilateral initiatives. (author)

  4. 净化网络环境及其机制%On Cleaning up Network Environment and Developing its Mechanism

    Institute of Scientific and Technical Information of China (English)

    盛剑锋; 余凌

    2011-01-01

    我国互联网规模的高速发展给人们的工作、学习与生活带来了便利,但互联网的虚拟性、开放性和交互性等特征,使网络也成为一些人从事违法活动的场所。依法采取监管措施,规范净化网络环境,已成为世界各国的共识。我国在借鉴国外经验与方法的基础上,应结合我国国情,在开展打击整治网络色情等专项行动的同时,要不断完善网络立法、技术监控、行业自律、社会监督、国际合作等措施,建立健全防范和查处的长效管理机制。%With China's rapid development of the Internet in its scale, people's work, study and life are made easier, but the Internet is likely to be a venue for illegal activities because it is virtual, open and interactive. It has been a common practice in all the countries to take regulatory measures to regulate and clean up the network environment according to law. We need to borrow foreign practices and methods, and combine them with China's actual conditions. In the special campaign to crack down on the online pornography, we must constantly improve our work at the network legislation, technical monitoring, self-discipline of the network trades, social supervision, and international cooperation to establish a long-acting management mechanism for a sound prevention and investigation.

  5. Modernization perspectives of the Sao Paulo State sugarcane sector through the clean development mechanism and potential carbon credits generation

    Energy Technology Data Exchange (ETDEWEB)

    Coelho, Suani Teixeira; Lora, Beatriz Acquaro [Brazilian Reference Center on Biomass (CENBIO/USP), SP (Brazil)], Emails: suani@iee.usp.br, blora@iee.usp.br

    2009-07-01

    The world-wide necessity of greenhouse gases mitigation and the intergovernmental mobilization to reach the objectives established by the United Nations Framework on Climate Change (UNFCCC) has opened space for the renewable energy increase in the world's energy matrix. In Brazil, the solid sugarcane industry currently develops business in the scope of the clean development mechanism (CDM) under the Kyoto's Protocol, by means of 18 biomass-based projects, with renewable energy generation through bagasse cogeneration at 20 Sao Paulo State's sugarcane production units. The projects activity's consists of increasing the efficiency in the bagasse cogeneration facilities, qualifying the units to sell surplus electricity to the national grid, avoiding the dispatch of the same amount of energy produced by fossil-fuelled thermal plants to that grid. The reduced emissions are measured in carbon equivalent and can be converted into negotiable credits. The objective of this study was to build a 'state of art' scenario, calculating the potential emissions reduction through CDM projects for the sugarcane sector of Sao Paulo State, in which we consider the adherence of all the production units of the State to the CDM projects. The technological parameters used to elaborate the scenario were provided by the Sao Paulo State Government Bioenergy Special Commission and the baseline factor used of 0,268 tCO{sub 2}e/MWh was the adopted by the CDM projects in operation in the State. The sugarcane database for the calculations was the production ranking provided by UNICA for the 2006/2007 season. In the most conservative scenario (40 bar bagasse) 131 units could generate 607 MWm of surplus power avoiding the emission of 1.404.593 tCO{sub 2}e/year. For the 92 bar (bagasse and straw) scenario, the units could generate 3.055 MWm of surplus power avoiding 12.199.443 tCO{sub 2}e/year. (author)

  6. Clean Water for Developing Countries.

    Science.gov (United States)

    Pandit, Aniruddha B; Kumar, Jyoti Kishen

    2015-01-01

    Availability of safe drinking water, a vital natural resource, is still a distant dream to many around the world, especially in developing countries. Increasing human activity and industrialization have led to a wide range of physical, chemical, and biological pollutants entering water bodies and affecting human lives. Efforts to develop efficient, economical, and technologically sound methods to produce clean water for developing countries have increased worldwide. We focus on solar disinfection, filtration, hybrid filtration methods, treatment of harvested rainwater, herbal water disinfection, and arsenic removal technologies. Simple, yet innovative water treatment devices ranging from use of plant xylem as filters, terafilters, and hand pumps to tippy taps designed indigenously are methods mentioned here. By describing the technical aspects of major water disinfection methods relevant for developing countries on medium to small scales and emphasizing their merits, demerits, economics, and scalability, we highlight the current scenario and pave the way for further research and development and scaling up of these processes. This review focuses on clean drinking water, especially for rural populations in developing countries. It describes various water disinfection techniques that are not only economically viable and energy efficient but also employ simple methodologies that are effective in reducing the physical, chemical, and biological pollutants found in drinking water to acceptable limits.

  7. Sustainable development with clean coal

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-08-01

    This paper discusses the opportunities available with clean coal technologies. Applications include new power plants, retrofitting and repowering of existing power plants, steelmaking, cement making, paper manufacturing, cogeneration facilities, and district heating plants. An appendix describes the clean coal technologies. These include coal preparation (physical cleaning, low-rank upgrading, bituminous coal preparation); combustion technologies (fluidized-bed combustion and NOx control); post-combustion cleaning (particulate control, sulfur dioxide control, nitrogen oxide control); and conversion with the integrated gasification combined cycle.

  8. Biomimetic self-cleaning surfaces: synthesis, mechanism and applications.

    Science.gov (United States)

    Xu, Quan; Zhang, Wenwen; Dong, Chenbo; Sreeprasad, Theruvakkattil Sreenivasan; Xia, Zhenhai

    2016-09-01

    With millions of years of natural evolution, organisms have achieved sophisticated structures, patterns or textures with complex, spontaneous multifunctionality. Among all the fascinating characteristics observed in biosystems, self-cleaning ability is regarded as one of the most interesting topics in biomimicry because of its potential applications in various fields such as aerospace, energy conversion and biomedical and environmental protection. Recently, in-depth studies have been carried out on various compelling biostructures including lotus leaves, shark skins, butterfly wings and gecko feet. To understand and mimic their self-cleaning mechanisms in artificial structures, in this article, recent progress in self-cleaning techniques is discussed and summarized. Based on the underlying self-cleaning mechanisms, the methods are classified into two categories: self-cleaning with water and without water. The review gives a succinct account of the detailed mechanisms and biomimetic processes applied to create artificial self-cleaning materials and surfaces, and provides some examples of cutting-edge applications such as anti-reflection, water repellence, self-healing, anti-fogging and micro-manipulators. The prospectives and directions of future development are also briefly proposed.

  9. State Grid Contributes to Clean Energy Development

    Institute of Scientific and Technical Information of China (English)

    Zhao

    2010-01-01

    The development of clean energy is an inevitable choice for China to achieve sustainable development.The article presents the strategic thinking and measures for the promotion of clean energy development in grids, which shows that the company will bear its responsibilities for the development as a large state-owned enterprise.

  10. Improved clean development mechanism and joint implementation to promote holistic sustainable development - an integrated policy and methodology for international energy collaboration

    Energy Technology Data Exchange (ETDEWEB)

    Kua Harn Wei

    2007-07-01

    The current Clean Development Mechanism/Joint Implementation framework does not emphasize on wholistic sustainability of energy projects. The Golden Standard was a good example of how this framework can be fine-tuned. However, it does not explicitly incentivize the adoption of the sustainability standards it outlines. A 4-element integrated policy strategy is proposed. A Sustainability Assessment Matrix is constructed to evaluate project proposals' sustainability performance. The Probational Sustainability Performance Demand requires continual monitoring of this performance of approved projects throughout a designated probation period. The involved countries will be awarded Sustainability Credits (measured with the matrix) in installments according to their performance within this period. The Probational Emission Reduction Demand requires investing countries to meet moderated emission reduction targets in order for them to claim the certified emission reductions/ emission reduction credits and their share of Sustainability Credits. These credits are converted into Sustainability Assistance Funds, which can be channeled back to finance either the approved projects or independent renewable energy projects in the involved countries. The MIT Energy Cost Model is used to estimate the required amount and identify the forms of such assistance package. Finally, an integrated policymaking framework is suggested to execute and monitor these interconnected policy elements. (auth)

  11. Feasibility of Applying Clean Development Mechanism and GHGs Emission Reductions in the Gold Mining Industry: A Case of Thailand

    OpenAIRE

    2015-01-01

    There is presently overwhelming scientific consensus that global climate change is indeed occurring, and that human activities are the primary driver. An increasingly resource and carbon constrained world will continue to pose formidable challenges to major industries, including mining. Understanding the implications of climate change mitigation for the mining industry, however, remains limited. This paper presents the results of a feasibility study on the implementation of a clean developmen...

  12. Clean Development Mechanism of Small Hydropower Projects in China%中国小水电之清洁发展机制

    Institute of Scientific and Technical Information of China (English)

    李婧; 张昊晟; 曲道志

    2013-01-01

    According to the regulations of Kyoto Protocol,the developed countries would help developing countries implementing high-efficiency clean energy projects through Clean Development Mechanism(CDM) by providing capital and technological supports.The conditions of registered CDM project,the methodologies for evaluating CDM project and the emission reduction and benefit estimates of project are introduced herein,and some suggestions are also given for settling the problems encountered in the process of CDM project registration.%根据《京都议定书》的规定,发达国家可利用其资金与技术通过清洁发展机制(CDM)帮助发展中国家建设清洁高效能源项目.对注册CDM项目的条件、CDM项目评估适用的方法学、项目减排量和收益估算等进行了详细的介绍,对小水电项目申请注册CDM项目过程中遇到的问题提出了建议.

  13. ASRM process development in aqueous cleaning

    Science.gov (United States)

    Swisher, Bill

    1992-12-01

    Viewgraphs are included on process development in aqueous cleaning which is taking place at the Aerojet Advanced Solid Rocket Motor (ASRM) Division under a NASA Marshall Space and Flight Center contract for design, development, test, and evaluation of the ASRM including new production facilities. The ASRM will utilize aqueous cleaning in several manufacturing process steps to clean case segments, nozzle metal components, and igniter closures. ASRM manufacturing process development is underway, including agent selection, agent characterization, subscale process optimization, bonding verification, and scale-up validation. Process parameters are currently being tested for optimization utilizing a Taguci Matrix, including agent concentration, cleaning solution temperature, agitation and immersion time, rinse water amount and temperature, and use/non-use of drying air. Based on results of process development testing to date, several observations are offered: aqueous cleaning appears effective for steels and SermeTel-coated metals in ASRM processing; aqueous cleaning agents may stain and/or attack bare aluminum metals to various extents; aqueous cleaning appears unsuitable for thermal sprayed aluminum-coated steel; aqueous cleaning appears to adequately remove a wide range of contaminants from flat metal surfaces, but supplementary assistance may be needed to remove clumps of tenacious contaminants embedded in holes, etc.; and hot rinse water appears to be beneficial to aid in drying of bare steel and retarding oxidation rate.

  14. Energy efficiency and CDM (Clean Development Mechanism): an attractive combination?; Eficiencia energetica e MDL (Mecanismo de Desenvolvimento Limpo): uma combinacao atrativa?

    Energy Technology Data Exchange (ETDEWEB)

    Aragao Neto, Raymundo Moniz de; Silva, Pedro Paulo [Programa GERBI - Reducao da Emissao de Gases Causadores do Efeito Estufa na Industria Brasileira, CE (Brazil); Almeida, Jose Ricardo Uchoa Cavalcanti [PETROBRAS S.A., Pojuca, BA (Brazil). Unidade de Negocios de Gas Natural (UNGN)

    2004-07-01

    The agreements that defined associated practices to the CDM (Clean Development Mechanism) include energy efficiency in end users as a possible candidate to CDM eligibility. Worldwide, the experience of using 'carbon credits' resulted from reduced emissions in end users, as consequence of increased energy efficiency in processes, is limited. The paper presents preliminary conclusions of case studies developed by GERBI, evaluating the emissions reduction potential achieved by energy efficiency improvements in industrial processes, as well as financial impacts due to emissions reduction certificates traded. The paper considers a simplified methodology for feasibility analysis, but with necessary information to demonstrate how CDM and Energy Efficiency combination can support the decision for project implementation. (author)

  15. Impacts on CO{sub 2} emission allowance of EU emission trading scheme (ETS) in a Swedish steel plant by clean development mechanism (CDM)

    Energy Technology Data Exchange (ETDEWEB)

    Wang, C.; Dahl, J. [Lulea Univ. of Technology, Lulea (Sweden). Division of Energy Engineering; Larsson, M. [MEFOS, Lulea (Sweden). Metallurgical Research Institute AB; Yan, J. [Lulea Univ. of Technology, Lulea (Sweden). Division of Energy Engineering]|[Malarden Univ., Vesteras (Sweden). Dept. IST

    2005-07-01

    This study examined the optimum solutions for steel mills in the European Union Emission Trading Scheme (ETS) to meet their emission allowance with low reduction cost. The study developed a computer-based optimization model that was used as part of a case study in a Swedish steel plant. The model used three different scenarios, including internal changes in the steel plant, allowance purchases via the Emission Trading Scheme, and buying credits through the Kyoto Protocol's Clean Development Mechanism (CDM). The model was used to simulate carbon dioxide emission in order to determine which solution offers the lowest cost coupled with high emission reduction. It was concluded that internal changes and the CDM scenarios will both contribute to assisting the Swedish plant to meet the emission trading allowance and Kyoto Protocol commitments. It was also concluded that the plant will face a carbon dioxide emission reduction burden from the third year of ETC onward. 14 refs., 8 tabs., 4 figs.

  16. Economic and Environmental Performances of Small-Scale Rural PV Solar Projects under the Clean Development Mechanism: The Case of Cambodia

    Directory of Open Access Journals (Sweden)

    Ellen De Schepper

    2015-09-01

    Full Text Available The two core objectives of the Clean Development Mechanism (CDM are cost-effective emission reduction and sustainable development. Despite the potential to contribute to both objectives, solar projects play a negligible role under the CDM. In this research, the greenhouse gas mitigation cost is used to evaluate the economic and environmental performances of small-scale rural photovoltaic solar projects. In particular, we compare the use of absolute and relative mitigation costs to evaluate the attractiveness of these projects under the CDM. We encourage the use of relative mitigation costs, implying consideration of baseline costs that render the projects profitable. Results of the mitigation cost analysis are dependent on the baseline chosen. To overcome this drawback, we complement the analysis with a multi-objective optimization approach, which allows quantifying the trade-off between economic and environmental performances of the optimal technologies without requiring a baseline.

  17. Supporting Clean Energy Development in Swaziland

    Energy Technology Data Exchange (ETDEWEB)

    2016-04-01

    Swaziland, a country largely dependent on regional fossil fuel imports to meet power needs, is vulnerable to supply changes and price shocks. To address this challenge, the country's National Energy Policy and Implementation Strategy prioritizes actions to enhance energy independence through scaling up renewable energy and energy efficiency. With approximately 70 percent of the country lacking electricity, Swaziland is also strongly committed to expanding energy access to support key economic and social development goals. Within this context, energy security and energy access are two foundational objectives for clean energy development in Swaziland. The partnership between the Swaziland Energy Regulatory Authority and the Clean Energy Solutions Center led to concrete outcomes to support clean energy development in Swaziland. Improving renewable energy project licensing processes will enable Swaziland to achieve key national objectives to expand clean energy access and transition to greater energy independence.

  18. Diagnosis of social and environmental evaluation of CDM (Clean Development Mechanism) projects; Diagnostico da sustentabilidade socioambiental nas atividades de projetos candidatos ao MDL (Mecanismo de Desenvolvimento Limpo)

    Energy Technology Data Exchange (ETDEWEB)

    Ziliotto, Marco Aurelio B.; Villa, Alessandra T.; Padilha, Simone L. Vieira; Canaverde, Patricia Margue [Instituto Ecoplan, PR (Brazil); Sanqueta, Carlos Roberto [Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil)

    2004-07-01

    The Clean Development Mechanism (CDM) contributes to sustainability and to sustainable development in those countries where CDM projects are developed and helps the countries from Annex I to achieve their reduction targets to Greenhouse Gases. This paper presents a proposal of a social and environmental sustainability diagnosis making use of a tool called Social and Environmental Evaluation Matrix - MADSA{sup R}. Its purpose is to establish and measure appropriate sustainable indicators to evaluate projects to ensure development benefits of CDM projects in host countries in consistency with Annex I countries developmental goals. MADSA{sup R} methodology allows a definition of a social and environmental baseline to MDL projects, and provides information to any interested group of people, from stockholders to local community; showing its results. It allows a greater clients', stockholders' and investor's trust as it measures the development so it makes possible the diagnosis and the comparison between all phases of the project. It also contributes to a continuous improvement through the participation of benefit groups in the diagnosis. Besides being an evaluation method and a management tool, this proposal looks for being a reference as an indicator pattern that evaluates the sustainable social and environmental development of CDM projects. (author)

  19. Clean Technology Evaluation & Workforce Development Program

    Energy Technology Data Exchange (ETDEWEB)

    Patricia Glaza

    2012-12-01

    The overall objective of the Clean Technology Evaluation portion of the award was to design a process to speed up the identification of new clean energy technologies and match organizations to testing and early adoption partners. The project was successful in identifying new technologies targeted to utilities and utility technology integrators, in developing a process to review and rank the new technologies, and in facilitating new partnerships for technology testing and adoption. The purpose of the Workforce Development portion of the award was to create an education outreach program for middle & high-school students focused on clean technology science and engineering. While originally targeting San Diego, California and Cambridge, Massachusetts, the scope of the program was expanded to include a major clean technology speaking series and expo as part of the USA Science & Engineering Festival on the National Mall in Washington, D.C.

  20. Viability of biofuel use in CDM (Clean Development Mechanisms) projects; Viabilidade do uso do biodiesel para projetos de MDL (Mecanismo de Desenvolvimento Limpo)

    Energy Technology Data Exchange (ETDEWEB)

    Fortes, Julio; Lima, Luciana Santana de [Universidade do Estado do Rio de Janeiro (UERJ), RJ (Brazil)

    2008-07-01

    Biodiesel, renewable energy source, has been adopted by several countries as a possible substitute for fossil fuels. Brazil, by its own, included oil and fat derived biofuel in its energetic matrix through National Politics for Biofuel Use and Production (NPBUP), issue in Law n. 11.097 of 01/13/2005. Many studies demonstrate the contribution of biofuel for Greenhouse Gases reduction, what turns projects using it into possible candidates for Clean Development Mechanism (CDM), instrument described in Kyoto Protocol. With purpose of studying the Brazilian potentiality of the insertion of biofuel into CDM projects, this report approaches many aspects related to CDM, as well the terms for being accepted as so. Through bibliographic review were listed the possibilities and the restraints for including biofuel in carbon market resulted, principally, by the obligation of its use; what goes against the principle of voluntary, for seen in the Protocol. I concluded analyzing the advantages of biofuel comparatively to environmental issues, emphasizing the necessity of making viable its entrance into carbon credits market. (author)

  1. The United Nations Development Program (PNUD) and the Mechanism for Clean Development (MDP); Le programme PNUD de renforcement des moyens pour les activites a executer dans le cadre de projets du MDP

    Energy Technology Data Exchange (ETDEWEB)

    Johansson, T. B. [Lund Univ., Lund (Sweden)

    1999-11-01

    The mechanism for clean development is the outcome of a proposal by the Group of 77 and China that was proposed within the context of the negotiations leading to the Kyoto Protocol. It is intended as an instrument in technological, political and socio-economic development. While there remain many questions about the modalities of surveillance, validation and certification of proposed projects the program`s eventual implementation and functioning depends upon the signatories` encouragement, especially the Annex 1 parties, and their adherence to the commitments undertaken with respect to the reduction of greenhouse gases during the period of 2008 to 2012. The UN Program for Development is dedicated to the eradication of poverty and the implementation of sustainable development; climatic change is considered as just one of the many major obstacles to be overcome towards achieving the Program`s objectives. The Clean Development Mechanism provides the means to assist developing countries to combat the negative effects of climatic change and to serve as an international pilot project for all countries on means to meet the challenges posed by greenhouse gas emission reduction obligations.

  2. The clean development mechanism for joint implementation of nuclear power projects in developing countries : a win-win strategy for climate-friendly development

    Energy Technology Data Exchange (ETDEWEB)

    Qian, J.; Tisue, T. [International Atomic Energy Agency, Dept. of Technical Co-operation, Vienna (Austria)

    1999-07-01

    The high energy use per capita that characterized most developed countries evolved almost free of constraints external to the market-place. Now, driven by concerns about global climate change and environmental degradation, these countries are being forced to seek climate friendly ways to preserve their enviable quality of life. Success will not come without considerable cost, but there is growing awareness that failure to act will be even more expensive. This recognition has already begun to focus increased attention and investment on conservation and efficiency measures, and on the development of renewable, non- Co2 emitting energy sources (wind, solar electric etc.). At present, it is an open question whether gains in efficiency and expansion of renewable energy sources will suffice. The answer depends in part on developing better models of how the global climate will respond to various levels of GHG in the atmosphere. Another ten years or so may suffice to get the picture clear. But whatever the details, few would argue in favour of additional large increases in GHG emissions, or of severely curtailing development plans of the less-well-off nations. The Climate Convention attests to the world-wide recognition that action on some scale will be obligatory. As we get the problem in better focus, it is important to put all choices on the table for discussion, and to keep all options open. Solving the problem will cost money, probably a lot of it, and finding the most cost-effective approach will be important.

  3. Legal system research on clean development mechanism(CDM)in China%中国清洁发展机制法律制度探讨

    Institute of Scientific and Technical Information of China (English)

    杨越

    2011-01-01

    According to the aim, establishing requirements and procedures, supervisory system of the Clean Development Mechanism (CDM) in Kyoto Protocol, this paper showed the tremendous environmental, social and economic profits China has made in running CDM. It also pointed out its problems in the aspects of project scale, potential project recognition, additional bank certification, CER legal right definition, project issue, etc. Referring to CDM's development tendency of the international world, this paper predicted that CDM, in a long term in future, will be an effective system against the global greenhouse gases discharge, and the tenets of CDM will be renewed and the detailed implementing institution of the CDM project will be perfected. In this paper, some suggestions on the legal institutions construction concerning China's CDM: a basic law of energy should be enacted urgently to offer legal bases for the measures including CDM against climatic changes; in legislation, the principle of the energy's sustained development should be established to specify CDM projects' proper standard, cancel the traditional unitary ownership pattern, explicit the CER legal authority and ownership and perfect the CDM projects' supervisory system to lower the danger the CDM projects have to face when pursuing economic profits, reinforce the CDM's profession norms and increase the CER issuing rate.%根据《京都议定书》关于清洁发展机制(Clean Development Mechanism,CDM)的目标、设立条件、步骤和监管制度的规定,指出了中国在实施清洁发展机制中所获得的环境、社会和经济方面的巨大利益,同时,也分析了目前中国实施清洁发展机制在项目发展规模、潜在项目识别、额外行证明、CER法律权属界定、项目签发等方面存在的问题.文章结合国际社会清洁发展制度的趋势走向,预测在今后相当长的时期内清洁发展机制仍将作为全球温室气体减排的有效制度而存在,并

  4. Mechanics of load-drag-unload contact cleaning of gecko-inspired fibrillar adhesives.

    Science.gov (United States)

    Abusomwan, Uyiosa A; Sitti, Metin

    2014-10-14

    Contact self-cleaning of gecko-inspired synthetic adhesives with mushroom-shaped tips has been demonstrated recently using load-drag-unload cleaning procedures similar to that of the natural animal. However, the underlying mechanics of contact cleaning has yet to be fully understood. In this work, we present a detailed experiment of contact self-cleaning that shows that rolling is the dominant mechanism of cleaning for spherical microparticle contaminants, during the load-drag-unload procedure. We also study the effect of dragging rate and normal load on the particle rolling friction. A model of spherical particle rolling on an elastomer fibrillar adhesive interface is developed and agrees well with the experimental results. This study takes us closer to determining design parameters for achieving self-cleaning fibrillar adhesives.

  5. Mechanics ofadhesion and contact self-cleaning of bio-inspired microfiberadhesives

    Science.gov (United States)

    Abusomwan, Uyiosa Anthony

    The remarkable attachment system of geckos has inspired the development of dry microfiber adhesives through the last two decades. Some of the notable characteristics of gecko-inspired fibrillar adhesives include: strong, directional, and controllable adhesion to smooth and rough surfaces in air, vacuum, and under water; ability to maintain strong adhesion during repeated use; anti-fouling and self-cleaning after contamination. Given these outstanding qualities, fibrillar adhesives promise an extensive range of use in industrial, robotic, manufacturing, medical, and consumer products. Significant advancements have been made in the design of geckoinspired microfiber adhesives with the characteristic properties listed above, with the exception of the anti-fouling and self-cleaning features. The self-cleaning mechanism of the gecko's adhesion system plays an important role to its ability to remain sticky in various environments. Similarly, enabling self-cleaning capability for synthetic microfiber adhesives will lead to robust performance in various areas of application. Presently, the practical use of fibrillar adhesives is restricted mainly to clean environments, where they are free from contaminants. The goal of this thesis is to conduct a detailed study of the mechanisms and mechanics of contact-based self-cleaning of gecko-inspired microfiber adhesives. This work focuses on contact self-cleaning mechanisms, as a more practical approach to cleaning. Previous studies on the cleaning of microfiber adhesives have mostly focused on mechanisms that involve complete removal of the contaminants from the adhesive. In this thesis, a second cleaning process is proposed whereby particles are removed from the tip of the microfibers and embedded between adjacent microfibers or in grooves patterned onto the adhesive, where they are no longer detrimental to the performance of the adhesive. In this work, a model of adhesion for microfiber adhesives that take the deformation of the

  6. Development of Megasonic cleaning for silicon wafers. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Mayer, A.

    1980-09-01

    The major goals to develop a cleaning and drying system for processing at least 2500 three-in.-diameter wafers per hour and to reduce the process cost were achieved. The new system consists of an ammonia-hydrogen peroxide bath in which both surfaces of 3/32-in.-spaced, ion-implanted wafers are cleaned in quartz carriers moved on a belt past two pairs of Megasonic transducers. The wafers are dried in the novel room-temperature, high-velocity air dryer in the same carriers used for annealing. A new laser scanner was used effectively to monitor the cleaning ability on a sampling basis. The following factors contribute to the improved effectiveness of the process: (1) recirculation and filtration of the cleaning solution permit it to be used for at least 100,000 wafers with only a relatively small amount of chemical make-up before discarding; (2) uniform cleanliness is achieved because both sides of the wafer are Megasonically scrubbed to remove particulate impurities; (3) the novel dryer permits wafers to be dried in a high-velocity room-temperature air stream on a moving belt in their quartz carriers; and (4) the personnel safety of such a system is excellent and waste disposal has no adverse ecological impact. With the addition of mechanical transfer arms, two systems like the one developed will produce enough cleaned wafers for a 30-MW/year production facility. A projected scale-up well within the existing technology would permit a system to be assembled that produces about 12,745 wafers per hour; about 11 such systems, each occupying about 110 square feet, would be needed for each cleaning stage of a 500-MW/year production facility.

  7. Hybrid Cleaning Technology for Enhanced Post-Cu/Low-Dielectric Constant Chemical Mechanical Planarization Cleaning Performance

    Science.gov (United States)

    Ramachandran, Manivannan; Cho, Byoung-Jun; Kwon, Tae-Young; Park, Jin-Goo

    2013-05-01

    During chemical mechanical planarization (CMP), a copper/low-k surface is often contaminated by abrasive particles, organic materials and other additives. These contaminants need to be removed in the subsequent cleaning process with minimum material loss. In this study, a dilute amine-based alkaline cleaning solution is used along with physical force in the form of megasonic energy to remove particles and organic contaminants. Tetramethylammonium hydroxide (TMAH) and monoethanolamine (MEA) are used as an organic base and complexing agent, respectively, in the proposed solution. Ethanolamine acts as a corrosion inhibitor in the solution. Organic residue removal was confirmed through contact angle measurements and X-ray photoelectron spectroscopy analysis. Electrochemical studies showed that the proposed solution increases protection against corrosion, and that the hybrid cleaning technology resulted in higher particle removal efficiency from both the copper and low-k surfaces.

  8. Political Conflict and Entangled Social Logics in the Development of Institutional Capacity: Creating a Designated National Authority for the Clean Development Mechanism in Uganda

    DEFF Research Database (Denmark)

    Olsen, Karen Holm

    2012-01-01

    Institutional capacity development is commonly conceptualised in an instrumental way; the concern is how to implement policy and realise project designs by aligning institutional realities with policy prescriptions. When assessed against project aims, capacity development interventions are often...

  9. Strategies for development of clean energy in China

    Institute of Scientific and Technical Information of China (English)

    Yang Zhen; Zhang Hongliang

    2008-01-01

    A development framework of clean energy in China is put forward based on core development strategy,technology support,and policy and laws support.In this framework,the priority development and strategic backup of clean energy are defined,and the technology support and policy and laws support are also presented.

  10. Development of Electrostatically Clean Solar Array Panels

    Science.gov (United States)

    Stern, Theodore G.

    2000-01-01

    Certain missions require Electrostatically Clean Solar Array (ECSA) panels to establish a favorable environment for the operation of sensitive scientific instruments. The objective of this program was to demonstrate the feasibility of an ECSA panel that minimizes panel surface potential below 100mV in LEO and GEO charged particle environments, prevents exposure of solar cell voltage and panel insulating surfaces to the ambient environment, and provides an equipotential, grounded structure surrounding the entire panel. An ECSA panel design was developed that uses a Front Side Aperture-Shield (FSA) that covers all inter-cell areas with a single graphite composite laminate, composite edge clips for connecting the FSA to the panel substrate, and built-in tabs that interconnect the FSA to conductive coated coverglasses using a conductive adhesive. Analysis indicated the ability of the design to meet the ECSA requirements. Qualification coupons and a 0.5m x 0.5m prototype panel were fabricated and tested for photovoltaic performance and electrical grounding before and after exposure to acoustic and thermal cycling environments. The results show the feasibility of achieving electrostatic cleanliness with a small penalty in mass, photovoltaic performance and cost, with a design is structurally robust and compatible with a wide range of current solar panel technologies.

  11. Developments in surface contamination and cleaning fundamentals and applied aspects

    CERN Document Server

    Kohli, Rajiv

    2015-01-01

    Developments in Surface Contamination and Cleaning, Vol. 1: Fundamentals and Applied Aspects, Second Edition, provides an excellent source of information on alternative cleaning techniques and methods for characterization of surface contamination and validation. Each volume in this series contains a particular topical focus, covering the key techniques and recent developments in the area. This volume forms the heart of the series, covering the fundamentals and application aspects, characterization of surface contaminants, and methods for removal of surface contamination. In addition, new cleaning techniques effective at smaller scales are considered and employed for removal where conventional cleaning techniques fail, along with new cleaning techniques for molecular contaminants. The Volume is edited by the leading experts in small particle surface contamination and cleaning, providing an invaluable reference for researchers and engineers in R&D, manufacturing, quality control, and procurement specific...

  12. Developing clean fuels: Novel techniques for desulfurization

    Science.gov (United States)

    Nehlsen, James P.

    The removal of sulfur compounds from petroleum is crucial to producing clean burning fuels. Sulfur compounds poison emission control catalysts and are the source of acid rain. New federal regulations require the removal of sulfur in both gasoline and diesel to very low levels, forcing existing technologies to be pushed into inefficient operating regimes. New technology is required to efficiently produce low sulfur fuels. Two processes for the removal of sulfur compounds from petroleum have been developed: the removal of alkanethiols by heterogeneous reaction with metal oxides; and oxidative desulfurization of sulfides and thiophene by reaction with sulfuric acid. Alkanethiols, common in hydrotreated gasoline, can be selectively removed and recovered from a hydrocarbon stream by heterogeneous reaction with oxides of Pb, Hg(II), and Ba. The choice of reactive metal oxides may be predicted from simple thermodynamic considerations. The reaction is found to be autocatalytic, first order in water, and zero order in thiol in the presence of excess oxide. The thiols are recovered by reactive extraction with dilute oxidizing acid. The potential for using polymer membrane hydrogenation reactors (PEMHRs) to perform hydrogenation reactions such as hydrodesulfurization is explored by hydrogenating ketones and olefins over Pt and Au group metals. The dependence of reaction rate on current density suggests that the first hydrogen addition to the olefin is the rate limiting step, rather than the adsorption of hydrogen, for all of the metals tested. PEMHRs proved unsuccessful in hydrogenating sulfur compounds to perform HDS. For the removal of sulfides, a two-phase reactor is used in which concentrated sulfuric acid oxidizes aromatic and aliphatic sulfides present in a hydrocarbon solvent, generating sulfoxides and other sulfonated species. The polar oxidized species are extracted into the acid phase, effectively desulfurizing the hydrocarbon. A reaction scheme is proposed for this

  13. Sustainable development, clean technology and knowledge from industry

    Directory of Open Access Journals (Sweden)

    Sokolović Slobodan M.

    2012-01-01

    Full Text Available Clean technology or clean production is the most important factor for the economic growth of a society and it will play the main role not only in the area of cleaner production, but also in sustainable development. The development of clean technology will be the main factor of the company’s strategy in the future. Each company, which wants to reach the competitive position at the market and wants to be environmentally friendly, has to accept the new approach in corporate management and the strategy of new clean technology. The main principles of clean technology are based on the concept of maximum resource and energy productivity and virtually no waste. This approach may be limited by human resources and the level of their environmental knowledge. Companies are committed to the development of the workers’ skills, and thus to the improvement of the company for the full implementation of the environmental legislation and clean production concept. Based on this commitment, one of Tempus projects is designed to improve the university-enterprise cooperation in the process of creating sustainable industry in Serbia, Bosnia and Herzegovina and the Former Yugoslav Republic of Macedonia. To achieve this goal, partner universities will create special courses on sustainable industry and thus enhance the lifelong learning process and cooperation between industry and universities in the Western Balkan countries.

  14. Wind power projects in the CDM: Methodologies and tools for baselines, carbon financing and substainability analysis[CDM=Clean Development Mechanism

    Energy Technology Data Exchange (ETDEWEB)

    Ringius, L.; Grohnheit, P.E.; Nielsen, L.H.; Olivier, A.L.; Painuly, J.; Villavicencio, A.

    2002-12-01

    The report is intended to be a guidance document for project developers, investors, lenders, and CDM host countries involved in wind power projects in the CDM. The report explores in particular those issues that are important in CDM project assessment and development - that is, baseline development, carbon financing, and environmental sustainability. It does not deal in detail with those issues that are routinely covered in a standard wind power project assessment. The report tests, compares, and recommends methodologies for and approaches to baseline development. To present the application and implications of the various methodologies and approaches in a concrete context, Africa's largest wind farm-namely the 60 MW wind farm located in Zafarana, Egypt- is examined as a hypothetical CDM wind power project The report shows that for the present case example there is a difference of about 25% between the lowest (0.5496 tCO2/MWh) and the highest emission rate (0.6868 tCO{sub 2}/MWh) estimated in accordance with these three standardized approaches to baseline development according to the Marrakesh Accord. This difference in emission factors comes about partly as a result of including hydroelectric power in the baseline scenario. Hydroelectric resources constitute around 21% of the generation capacity in Egypt, and, if excluding hydropower, the difference between the lowest and the highest baseline is reduced to 18%. Furthermore, since the two variations of the 'historical' baseline option examined result in the highest and the lowest baselines, by disregarding this baseline option altogether the difference between the lowest and the highest is reduced to 16%. The ES3-model, which the Systems Analysis Department at Risoe National Laboratory has developed, makes it possible for this report to explore the project-specific approach to baseline development in some detail. Based on quite disaggregated data on the Egyptian electricity system, including the wind

  15. Impacts on CO{sub 2} emission allowance of EU emission trading scheme (ETS) in a Swedish steel plant by clean development mechanism (CDM). Paper no. IGEC-1-058

    Energy Technology Data Exchange (ETDEWEB)

    Wang, C. [Lulea Univ. of Technology, Div. of Energy Engineering, Lulea (Sweden)]. E-mail: chuan.wang@ltu.se; Larsson, M. [MEFOS-Metallurgical Research Inst. AB, Lulea (Sweden)]. E-mail: mikael.larsson@mefos.se; Yan, J. [Lulea Univ. of Technology, Div. of Energy Engineering, Lulea (Sweden)]|[Malardalen Univ., Dept. IST, Vasteras (Sweden)]. E-mail: yanjy@ket.kth.se; Dahl, J. [Lulea Univ. of Technology, Div. of Energy Engineering, Lulea (Sweden)]. E-mail: jan.dahl@ltu.se

    2005-07-01

    The implementation of EU Emission Trading Scheme (ETS) started on January 1st 2005 according to national plans for allocating emissions rights. The steel industry is one of the industrial sectors included in this scheme. The objective of this paper is to investigate and evaluate the optimum solution(s) in the steel mills to meet their emission allowance with low reduction cost. An optimization model is developed and used for a case study in a Swedish steel plant. Three scenarios were created in the model, i.e. internal changes within the steel plant, ETS, and the Kyoto Protocol's clean development mechanism (CDM). For the last scenario, China was selected as a country of the non-Annex I Party for the emission trading by CDM. The modeling results show that the studied plant will face an emission gap between allowed and calculated emissions in the near future. Compared to the ETS, the implementation of CDM projects will make the plant reduce CO{sub 2} emission at a lower cost. The internal changes within the plant will also play an important role for the solution of low abatement cost. (author)

  16. Power generation from biomass estimation for projects of the clean development mechanism program; Estimacion de la generacion de energia a partir de biomasa para proyectos del programa de mecanismo de desarrollo limpio

    Energy Technology Data Exchange (ETDEWEB)

    Flores Velazquez, Roberto; Munoz Ledo Carranza, Ramon; Flores Brito, Brenda Berenice; Cano Ruiz, Karla Itzel [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2009-07-01

    In the present work, it is calculated the amount of energy and the reductions of greenhouse gases emissions that may be obtained taking advantage of organic wastes, such as, sugarcane bagasse and urban wastes. The appropriate use of these waster could generate up to 28% of the power requirements reported for the state of Morelos in 2005. Likewise, the Clean Development Mechanism could be employed to negotiate carbon certificates in such as way that the industrialized countries could meet with the goals implemented in the Kyoto Protocol and the state of Morelos could get the financial resource to be in the front technologic line with respect to the utilization of organic waster to generate power and to reduce greenhouse gases emissions. [Spanish] En el presente trabajo se estima la cantidad de energia y reduccion de emisiones de gases de efecto invernadero que podria obtenerse mediante el aprovechamiento de desechos industriales y municipales en el estado de Morelos, Mexico, tales como el bagazo de cana y la basura municipal. El uso adecuado de estos desechos podria generar hasta un 28% de los requerimientos energeticos de Morelos reportados en 2005. Asimismo, a traves del programa de Mecanismo de Desarrollo Limpio se podrian negociar certificados de carbono para que los paises industrializados cumplan las metas estipuladas en el Protocolo de Kyoto, y el estado de Morelos obtenga la inversion necesaria para estar a la vanguardia tecnologica en la utilizacion de desechos organicos para la generacion de energia y la reduccion de gases de efecto invernadero.

  17. Effectiveness of mechanical tongue cleaning on breath odour and tongue coating : a systematic review

    NARCIS (Netherlands)

    Van der Sleen, M. I.; Slot, D. E.; Van Trijffel, E.; Winkel, E. G.; Van der Weijden, G. A.

    2010-01-01

    Background: The objective of this review was to summarize the available evidence regarding the effects of mechanical tongue cleaning compared with no mechanical tongue cleaning on breath odour and tongue coating (TC). Methods: PubMed-MEDLINE, EMBASE and Cochrane-CENTRAL were searched to identify pot

  18. Effectiveness of mechanical tongue cleaning on breath odour and tongue coating: a systematic review

    NARCIS (Netherlands)

    M.I. van der Sleen; D.E. Slot; E. van Trijffel; E.G. Winkel; G.A. van der Weijden

    2010-01-01

    Background:  The objective of this review was to summarize the available evidence regarding the effects of mechanical tongue cleaning compared with no mechanical tongue cleaning on breath odour and tongue coating (TC). Methods:  PubMed-MEDLINE, EMBASE and Cochrane-CENTRAL were searched to identify p

  19. Development and testing of the cooling coil cleaning end effector

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, K.I.; Mullen, O.D.; Powell, M.R.; Daly, D.S.; Engel, D.W.

    1997-09-30

    The Retrieval Process Development and Enhancement (KPD{ampersand}E) program has developed and tested an end effector to support the waste retrieval mission at the Idaho National Engineering and Environmental Laboratory (INEEL). The end effector was developed specifically to remove a sticky waste material from the cooling coils in the High Level Liquid Waste (HLLW) tank, and to vacuum up a sediment layer that has settled beneath the cooling coils. An extensive testing program was conducted in the hydraulic test bed (HTB) at the Pacific Northwest National Laboratory (PNNL) to evaluate the performance of the end effector under simulated in-tank conditions. A mock up of the cooling coils was installed in the test bed tank, and simulated waste materials were included to represent the sticky waste on the tubes and the particulate waste settled beneath them. The testing program focused on assessing long-duration mining strategies for cleaning the cooling coils and removing the particulate waste forms. The report describes the results of the end effector testing program at PNNL. Section 2 describes the physical characteristics of the HLLW tanks, including the layout of the cooling coils, and it also describes what is known of the waste forms in the tanks. Section 3 describes the cleaning and retrieval strategy that was used in developing the end effector design. Section 4 describes the cooling coil mockup in the hydraulic test bed. Section 5 discusses the rationale used in selecting the simulants for the tarry waste and particulate waste forms. Section 6 describes the tests that were performed to evaluate cleaning of the cooling coils and retrieval of the particulate simulant. Section 7 summarizes the cleaning and retrieval tests, assesses the relative importance of cleaning the cooling coils and retrieving the particulate waste, and suggests modifications that would simplify the end effector design.

  20. Cleanliness is next to godliness: mechanisms for staying clean.

    Science.gov (United States)

    Amador, Guillermo J; Hu, David L

    2015-10-01

    Getting dirty is a fundamental problem, and one for which there are few solutions, especially across the enormous range of animal size. How do both a honeybee and a squirrel get clean? In this Review, we discuss two broad types of cleaning, considered from the viewpoint of energetics. Non-renewable cleaning strategies rely upon the organism as an energy source. Examples include grooming motions, wet-dog shaking or the secretion of chemicals. Renewable cleaning strategies depend on environmental sources of energy, such as the use of eyelashes to redirect incoming wind and so reduce deposition onto the eye. Both strategies take advantage of body hair to facilitate cleaning, and honeybees and squirrels, for example, each have around 3 million hairs. This hair mat increases the area on which particles can land by a factor of 100, but also suspends particles above the body, reducing their adhesion and facilitating removal. We hope that the strategies outlined here will inspire energy-efficient cleaning strategies in synthetic systems.

  1. Clean development mechanisms in a sugar vinasse treatment plant with UASB reactors. Technical and consideration regarding the use of such mechanisms; Mecanismos de desarrollo limpio en una planta de tratamiento de vinazas de azucar con reactores UASB. Consideraciones tecnicas y economicas sobre su aplicacion

    Energy Technology Data Exchange (ETDEWEB)

    Obaya Abreu, M. C.; Valdes Jimenez, E.; Lorenzo Acosta, Y.; Gallardo Capote, M.; Leon Perez, O. L.; Diez Perez, K.; Morales Carmouse, M.

    2005-07-01

    Presently work two options of Clean Development Mechanisms (CDM) are applied, for which were carried out the researchers at pilot plant level with the purpose of eliminating all the dilution water, being the distillery wastewater to the concentrations from the COD that are produced in the distillation columns and as second option, eliminating the macro nutrients. Using the COMFAR III tool to carry out financial analyses, are compared, at opportunity level studies, the two new operation methodologies, with the realized opportunity study for the original project. (Author) 16 refs.

  2. Clean coal combustion: development of clean combustion technologies for residual fuels

    Energy Technology Data Exchange (ETDEWEB)

    Montiel, M.F. [Electric Research Institute, Cuernavaca (Mexico)

    2003-07-01

    Most of the large quantities of heavy fuel oil (about 4% sulphur-content) produced in Mexican refineries are burned in power plants. More natural gas is being used, and it is estimated that by 2010, about one-third of Mexico's electricity will be produced from natural gas. As petroleum and gas reserves are depleted, power plants will consume more imported coal. To continue combustion of dirty fuels, advanced clean combustion technologies must be developed. Two feasibility projects were conducted over the period 1989-1995 on combustion of Mexican fuels in a bubbling fluidized combustor and in IGCC power plants. More recent feasibility studies for cogeneration plants in refineries are outlined. Solid fuels for IGCC and CFB are among the most important developments. Over the period 2004-2008, projects to study clean combustion of Mexican fuels will be conducted in the following areas: operational problems in IGCC plants, construction of an entrained flow gasifier for synthesis gas production and for feeding of heavy fuels and coal emulsions, and development of CFD (computational fluid dynamics) models.

  3. 75 FR 9181 - Secretarial China Clean Energy Business Development Mission; Application Deadline Extended

    Science.gov (United States)

    2010-03-01

    ... International Trade Administration Secretarial China Clean Energy Business Development Mission; Application... the Clean Energy Business Development Missions' Web site at http://www.trade.gov/CleanEnergyMission or... or CleanEnergyMission@doc.gov ). The application deadline has been extended to Friday, March 12,...

  4. 75 FR 9181 - Secretarial Indonesia Clean Energy Business Development Mission: Application Deadline Extended

    Science.gov (United States)

    2010-03-01

    ... International Trade Administration Secretarial Indonesia Clean Energy Business Development Mission: Application... the Clean Energy Business Development Missions' Web site at http://www.trade.gov/CleanEnergyMission or... or CleanEnergyMission@doc.gov ). The application deadline has been extended to Friday, March 12,...

  5. Clean Development Mechanism and Construction of Carbon Trading Market in China%清洁发展机制与中国碳排放交易市场的构建

    Institute of Scientific and Technical Information of China (English)

    羊志洪; 鞠美庭; 周怡圃; 王琦

    2011-01-01

    清洁发展机制是《京都议定书》创设的实现全球碳减排目标的三大灵活机制之一,为我国的可持续发展作出了重大贡献,但其在我国运行中存在的问题也对我国参与国际碳市场和构建国内碳市场带来了风险与障碍.针对于此,本文对中国清洁发展机制项目的类型、数量、注册、签发等情况进行对比,发现我国虽然项目众多,但发展极不平衡.在此基础上,分析了中国清洁发展机制存在的主要问题,包括法律保障机制缺失,项目减排潜力发挥不充分,缺乏对转让技术的科学评估等.然后,通过介绍国际碳排放交易市场发展的不确定性和在2012年“后京都时期”的发展趋势,揭示了中国在这一过程中所承担的项目投资减少、成本增加等市场风险以及“碳泄漏”等环境风险.针对上述问题和风险,本文提出以现有清洁发展机制经验为基础构建中国国内碳排放交易市场的基本思路,即建立以排放交易法律体系为基础,以自愿碳交易市场构建为起点,以完善的监督管理体系为保障的中国碳排放交易机制.%The clean development mechanism (CDM) is one of the three "flexibility" mechanisms defined in the Kyoto Protocol. The CDM has made an important contribution to the sustainable development in China; however, there are still many problems during the operation of CDM in China and this situation puts participation of China in the international carbon trading market and construction of domestic carbon trading market at risk. In light of this, this paper compares the types, amount, registration and issue of CDM projects in China, and then finds that the CDM projects are in large quantity, but the development of different types of projects is uneven. On this basis, we analyze the main problems of CDM in China, including the lack of legal system, insufficient potential of emission reduction and lack of scientific assessment of transferred

  6. CDM. Information and guidebook - Developed for the UNEP project 'CD4CDM'[Clean development nedianism

    Energy Technology Data Exchange (ETDEWEB)

    Lee, M.K. (ed.)

    2003-12-01

    Since the Clean Development Mechanism (CDM) was defined at Conference of the Parties 3 in Kyoto 1997, it took the international community another 4 years to reach the Marrakesh Accords in which the modalities and procedures to implement the CDM was elaborated. Even if more detailed rules, procedures and modalities have to be further developed a general framework to implement the CDM and other Kyoto mechanisms are now in place. This guidebook is produced to support the UNEP project 'Capacity Development for the Clean Development Mechanism'. Focus is on the CDM project cycle, the Project Design Document (PDD), and related issues such as sustainable development goals, financing and market intelligence. The appendices present frequently asked questions and answers, a short overview of existing guidelines and a possible future list of eligible CDM projects categories. (BA)

  7. Report to the United States Congress clean coal technology export markets and financing mechanisms

    Energy Technology Data Exchange (ETDEWEB)

    1994-05-01

    This report responds to a Congressional Conference Report that requests that $625,000 in funding provided will be used by the Department to identify potential markets for clean coal technologies in developing countries and countries with economies in transition from nonmarket economies and to identify existing, or new, financial mechanisms or financial support to be provided by the Federal government that will enhance the ability of US industry to participate in these markets. The Energy Information Administration (EIA) expects world coal consumption to increase by 30 percent between 1990 and 2010, from 5.1 to 6.5 billion short tons. Five regions stand out as major foreign markets for the export of US clean coal technologies: China; The Pacific Rim (other than China); South Asia (primarily India); Transitional Economies (Central Europe and the Newly Independent States); and Other Markets (the Americas and Southern Africa). Nearly two-thirds of the expected worldwide growth in coal utilization will occur in China, one quarter in the United States. EIA forecasts nearly a billion tons per year of additional coal consumption in China between 1990 and 2010, a virtual doubling of that country`s coal consumption. A 30-percent increase in coal consumption is projected in other developing countries over that same period. This increase in coal consumption will be accompanied by an increase in demand for technologies for burning coal cost-effectively, efficiently and cleanly. In the Pacific Rim and South Asia, rapid economic growth coupled with substantial indigenous coal supplies combine to create a large potential market for CCTS. In Central Europe and the Newly Independent States, the challenge will be to correct the damage of decades of environmental neglect without adding to already-considerable economic disruption. Though the situation varies, all these countries share the basic need to use indigenous low-quality coal cleanly and efficiently.

  8. Review on Characterization and Mechanical Performance of Self-cleaning Concrete

    Directory of Open Access Journals (Sweden)

    Zailan Siti Norsaffirah

    2017-01-01

    Full Text Available Self-cleaning concrete is an effective alternative to provide cleaner environment which contribute to sustainability and towards a green environment. It is in accordance with the requirements of environmental issues on huge energy consumption and air pollution from carbon dioxide (CO2 emissions. Photocatalyst in self-cleaning concrete accelerates the decomposition of organic particulates, hence pollution could be reduced through photocatalytic degradation of gaseous pollutants. Mechanical performances of self-cleaning concrete were improved by adding photocatalytic materials. Self cleaning abilities were evaluated in the photocatalytic activity test under UV light and photocatalytic degradation of gaseous pollutant was measured by depollution test. This review aims to give an overview about the characteristics of photocatalytic materials and mechanical performances of self-cleaning concrete.

  9. Research and development of electric vehicles for clean transportation

    Institute of Scientific and Technical Information of China (English)

    WADA Masayoshi

    2009-01-01

    This article presents the research and development of an electric vehicle (EV) in Dept.of Human-Robotics Saitama Institute of Technology.Electric mobile systems developed in our laboratory include a converted electric automobile,electric wheelchair and personal mobile robot.These mobile systems contribute to realize clean transportation since energy sources and devices from all vehicles,i.e.,batteries and electric motors,does not deteriorate the environment.To drive motors for vehicle traveling,robotic technologies were applied.

  10. Plasma Cleaning

    Science.gov (United States)

    Hintze, Paul E.

    2016-01-01

    NASA's Kennedy Space Center has developed two solvent-free precision cleaning techniques: plasma cleaning and supercritical carbon dioxide (SCCO2), that has equal performance, cost parity, and no environmental liability, as compared to existing solvent cleaning methods.

  11. The Mechanical Analysis and Experimental Study of Shock Wave Effect of Electrical Discharge under Water In Filth Cleaning

    Institute of Scientific and Technical Information of China (English)

    Deng Qilin; Zhang Lei; Zhou Jinjin

    2004-01-01

    Filth adhering to metal pipes can be cleaned by shock wave generated by electrical discharge under water. The mechanism of shock wave effect of electrical discharge under water on filth cleaning is analyzed by building a mechanical model. A metal pipe coated with cement to simulate real filth is cleaned by using electrical discharge under water. The experimental results confirm the mechanical analysis and also show the technology of electrical discharge under water is an very effective method for filth cleaning.

  12. Mechanisms for nano particle removal in brush scrubber cleaning

    Science.gov (United States)

    Huang, Yating; Guo, Dan; Lu, Xinchun; Luo, Jianbin

    2011-01-01

    A model describing the nano particle (cleaning is presented based on experiment results and theoretical analysis. The forces on the particles in different situations are analyzed and discussed. The adhesion forces of the van der Waals force, the electrostatic force, the brush load and the static friction between the particle and the wafer are calculated. The contact elastic force, hydrodynamic drag force and friction between the brush and the particle are considered as removal forces and are evaluated. The porous structure and roughness surface of brush material are considered in the hydrodynamic model to describe the brush deformation and the flow field in the cleaning process. The porous structure will result in decrease of hydrodynamic drag force. There are four situations of the particles relative to the brush roughness asperities for which the forces on the particle are different. When the particle is in contact with a brush asperity or on the wafer surface and in a semi-infinite fluid flow field, the particle may be removed by hydrodynamic force and elastic force in the presence of surfactant. When the particle is embedded in the brush asperity, the remove will realized when the friction caused by adhesion between the brush and the particle overcome the adhesion force between particle and wafer surface. The removed particles will be in the flow field or adhered on the brush surface and may redeposit on the wafer surface.

  13. Development of CO2 snow cleaning for in situ cleaning of µCMM stylus tips

    Science.gov (United States)

    Feng, Xiaobing; Kinnell, Peter K.; Lawes, Simon

    2017-01-01

    Contamination adhered to the surface of a µCMM stylus tip compromises the measurement accuracy of the µCMM system, potentially causing dimensional errors that are over ten times larger than the uncertainty of a modern µCMM. In prior work by the authors, the use of a high pressure CO2 gas stream was demonstrated to achieve significant cleaning rate for a range of contaminant without damage to the stylus tip surface. This paper explores the practical challenges of achieving effective stylus tip cleaning in situ on µCMM systems. Two types of snow cleaning approaches were evaluated for their coverage of cleaning, thermal impact and gas flow forces. This work then presents a novel multi-nozzle prototype system using pulsed snow streams to achieve cleaning coverage over the entire stylus tip, and balances forces from the snow streams reducing drag force imparted by the gas stream to levels comparable to the probing force of µCMMs, as well as allowing automated cleaning procedure integrated into a µCMM system.

  14. Development of durable self-cleaning coatings using organic-inorganic hybrid sol-gel method

    Science.gov (United States)

    Kumar, Divya; Wu, Xinghua; Fu, Qitao; Ho, Jeffrey Weng Chye; Kanhere, Pushkar D.; Li, Lin; Chen, Zhong

    2015-07-01

    Self-cleaning coatings with excellent water-repellence and good mechanical properties are in high demand. However, producing such coatings with resistance to mechanical abrasion and environmental weathering remains a key challenge. Mechanically robust coatings based on tetraethylorthosilicate (TEOS) and glycidoxypropyltriethoxysilane (Glymo) have been prepared using a sol-gel method. Emphasis is given to the addition of Glymo, an epoxy silane which creates an organic matrix that blends with the inorganic Sisbnd Osbnd Si matrix formed from the TEOS. The combination of the blended matrix produced coatings with good adhesion to substrates and improved mechanical properties. Fluoroalkylsilane (FAS) and silica fillers were introduced to increase the hydrophobicity of the coating. It was found that the water contact angle (CA) of these coatings increases from 115° to 164° upon decreasing filler size from 1-5 μm to 10-20 nm. The sliding angle (SA) for coatings with 15 wt.% loading of 10-20 nm silica is around 2°. UV weathering does not show significant effect on the properties of the coatings. Mechanical properties and performances including hardness, Young's modulus, coating adhesion and abrasion resistance were systematically analyzed. In the current work, a simple self-cleaning test, which measures the extent of dirt accumulation and subsequent removal by water spray, was performed. The coatings with 15 wt.% loading of 10-20 nm silica particles show the best self-cleaning performance both before and after mechanical abrasion. The developed coating process is simple and can be easily scaled-up for large surfaces that require self-cleaning function.

  15. Mechanical Design and Dynamcis of an Autonomous Climbing Robot for Elliptic Half-shell Cleaning

    Directory of Open Access Journals (Sweden)

    Houxiang Zhang

    2008-11-01

    Full Text Available This paper presents an auto-climbing robot for cleaning the elliptic half-shell of National Grand Theatre in China. The robot consists of a climbing mechanism, a moving mechanism, two cleaning brushes and supporting mechanisms. The mechanism and unique aspects are presented in detail. A distributed control system based on CAN bus is designed to meet the requirements of controlling the robot. After that the emphasis for discussion is on the motion realization which includes climbing and cleaning movements. The robot independently climbs and descends in the vertical direction and cleans in the horizontal direction. It takes the circling tracks as supports for climbing up and down between strips and moving horizontally along one strip around the ellipsoid. For system design and control purposes, the dynamic models of the climbing and cleaning processes are given applying of the Lagrange equation. Furthermore the force distribution of the front and rear supporting mechanisms is computed in a way that ensures the safety of the climbing process. In the end, the successful on-site tests confirm the principles described above and the robot's ability.

  16. DEVELOPMENT OF HAZARDOUS SLUDGE SIMULANTS FOR ENHANCED CHEMICAL CLEANING TESTS

    Energy Technology Data Exchange (ETDEWEB)

    Eibling, R.

    2010-04-12

    An Enhanced Chemical Cleaning (ECC) process is being developed by Savannah River Remediation (SRR) to aid in Savannah River Site (SRS) High-Level Waste (HLW) tank closure. After bulk waste removal, the ECC process can be used to dissolve and remove much of the remaining sludge from HLW tanks. The ECC process uses dilute oxalic acid (1 wt %) with in-line pH monitoring and control. The resulting oxalate is decomposed through hydroxylation using an Advanced Oxidation Process (AOP). Minimizing the amount of oxalic acid used for dissolution and the subsequent oxidative destruction of oxalic acid will minimize the potential for downstream impacts. Initial efficacy tests by AREVA demonstrated that previous tank heel simulants could be dissolved using dilute oxalic acid. The oxalate could be decomposed by an AOP that utilized ozone and ultraviolet (UV) light, and the resultant metal oxides and hydroxides could be separated out of the process.

  17. Reactive Ion Etching as Cleaning Method Post Chemical Mechanical Polishing for Phase Change Memory Device

    Institute of Scientific and Technical Information of China (English)

    ZHONG Min; SONG Zhi-Tang; LIU Bo; FENG Song-Lin; CHEN Bomy

    2008-01-01

    In order to improve nano-scale phase change memory performance,a super-clean interface should be obtained after chemical mechanical polishing (CMP) of Ge2Sb2Te5 phase change films.We use reactive ion etching (RIE) as the cleaning method.The cleaning effect is analysed by scanning electron microscopy and an energy dispersive spectrometer.The results show that particle residue on the surface has been removed.Meanwhile,Ge2 Sb2 Te5 material stoichiometric content ratios are unchanged.After the top electrode is deposited,currentvoltage characteristics test demonstrates that the set threshold voltage is reduced from 13 V to 2.7V and the threshold current from 0.1 mA to 0.025 mA.Furthermore,we analyse the RIE cleaning principle and compare it with the ultrasonic method.

  18. Damage and deterioration mechanism and curing technique of concrete structure in main coal cleaning plants

    Institute of Scientific and Technical Information of China (English)

    LV Heng-lin; ZHAO Cheng-ming; SONG Lei; MA Ying; XU Chun-hua

    2009-01-01

    Concrete structures in main coal cleaning plants have been rebuilt and reinforced in the coal mines of the Shanghai Da-tun Energy Sources Co. Ltd., the first colliery of the Pingdingshan Coal Co. Ltd. and the Sanhejian mine of the Xuzhou Mining Group Co. Ltd. In these projects, the operating environment and reliability of concrete structures in the main plants of the three companies were investigated and the safety of the structures inspected. Qualitative and quantitative analyses were made on the spe-cial natural, technological and mechanical environments around the structures. On the basis of these analyses, we discuss the long-term, combined actions of the harsh natural (corrosive gases, liquids and solids) and mechanical environments on concrete structures and further investigated the damage and deteriorating mechanisms and curing techniques of concrete structures in the main coal cleaning plants. Our study can provide a theoretical basis for ensuring the reliability of concrete structures in main coal cleaning plants.

  19. Combination effect of ultrasound and shake as a mechanical action for textile cleaning.

    Science.gov (United States)

    Gotoh, Keiko; Harayama, Kokoro; Handa, Keiko

    2015-01-01

    The ultrasonic cleaning of artificially soiled fabrics with and without shake was carried out in an aqueous anionic surfactant solution. The polyester, cotton and polyester/cotton (65/35) fabrics were soiled with oleic acid or carbon black as a model soil, and cleaned together with their original fabrics with applying ultrasound for 5min. The detergency and the soil redeposition were determined from the change in the Kubelka-Munk function of the soiled and original fabric surfaces due to the cleaning. For any fabric, the removal of oleic acid and carbon black from the soiled fabric and their redeposition onto the original fabric increased with increasing electric power consumption of ultrasound. When ultrasound and shake were applied at the same time, the detergency further increased for any electric power consumption. The maximum detergency obtained with combination of ultrasound 340W and shake 160spm was compared with detergency obtained with Wascator, a horizontal axis drum type washer. It was found that the ultrasound/shake combination cleaning enabled efficient removal of both soils from any fabric and the detergency of the polyester fabrics was comparable to that with Wascator. The mechanical action during the washing was evaluated by two mechanical action test pieces commercially available, which indicated that the ultrasound/shake combination cleaning provided gentle mechanical action to the fabric in comparison with the drum type washer. The SEM observations showed the damage of the fabric and fiber surfaces was negligibly small after the ultrasound/shake combination washing.

  20. Research on the Working Mechanism and Virtual Design for Cleaning Element in Brush Shape of the Sugarcane Harvester

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The cleaning element is the key part to the small w ho le-stall sugarcane harvester, which is suitable to the highland. And it is the bottleneck of the design of the small sugarcane harvester. The working mechanism of centrifugal cleaning method of the cleaning element in brush shape is based on the high speed rotating cleaning element that push, scrub, and strike the sta lk to separate the leaves from the sugarcane. The paper elaborated the worki ng mechanism of cleaning element in brush shape of the ...

  1. Biogas from landfills embankments: the Brazilian contribution for the management of urban solid residues and the greenhouse effect mitigation through the mechanisms for clean development; Biogas de aterros: a contribuicao do Brasil na gestao de residuos solidos urbanos e na mitigacao do efeito estufa atraves dos mecanismos de desenvolvimento limpo

    Energy Technology Data Exchange (ETDEWEB)

    Lacerda, Gleide B.M.; Guimaraes, Hoji Y' a Henda da R.; Andrade, Euridice S. Mamede de; Teixeira, Gisele Pereira; Freitas, Marcos A.V. [Universidade Federal do Rio de Janeiro (COPPE/UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-Graduacao de Engenharia. Programa de Planejamento Energetico

    2008-07-01

    This paper studies the clean development mechanism (CDM) for sanitary sewage in Brazil, as instruments for flexibilization and mitigation of the effects of climate changes coming from the global heating. This research presents the assessments of the CDM projects for sanitary sewage in Brazil, considering the Project Conception Documents (PCD) approved until November 2007. The paper presents some methodologies for studying of energy generation potential from the biogas originated in sanitary sewage. The paper also contributes to projects of carbon credit commercialization, and relevance of the CDM instrument for the adequate management expansion of the residence solid residues as well, and advances in the implantation of sanitary embankments in Brazil.

  2. Designing Catalysts for Clean Technology, Green Chemistry, and Sustainable Development

    Science.gov (United States)

    Meurig Thomas, John; Raja, Robert

    2005-08-01

    There is a pressing need for cleaner fuels (free or aromatics and of minimal sulfur content) or ones that convert chemical energy directly to electricity, silently and without production of noxious oxides and particulates; chemical, petrochemical and pharmaceutical processes that may be conducted in a one-step, solvent-free manner and that use air as the preferred oxidant; and industrial processes that minimize consumption of energy, production of waste, or the use of corrosive, explosive, volatile, and nonbiodegradable materials. All these needs and other desiderata, such as the in situ production and containment of aggressive and hazardous reagents, and the avoidance of use of ecologically harmful elements, may be achieved by designing the appropriate heterogeneous inorganic catalyst, which ideally should be cheap, readily preparable and fully characterizable, preferably under in situ reaction conditions. A range of nanoporous and nanoparticle catalysts that meet most of the stringent demands of sustainable development and responsible (clean) technology is described. Specific examples that are highlighted include the production of adipic acid (precursor of polyamides and urethanes) without the use of concentrated nitric acid nor the production of greenhouse gases such as nitrous oxide; the production of caprolactam (precursor of nylon) without the use of oleum and hydroxylamine sulfate; and the terminal oxyfunctionalization of linear alkanes in air. The topic of biocatalysis and sustainable development is also briefly discussed for the epoxidation of terpenes and fatty acid methyl esters; for the generation of polymers, polylactides, and polyesters; and for the production of 1,3-propanediol from corn.

  3. Development of clean coal and clean soil technologies using advanced agglomeration techniques

    Energy Technology Data Exchange (ETDEWEB)

    Ignasiak, B.; Ignasiak, T.; Szymocha, K.

    1990-01-01

    Three major topics are discussed in this report: (1) Upgrading of Low Rank Coals by the Agflotherm Process. Test data, procedures, equipment, etc., are described for co-upgrading of subbituminous coals and heavy oil; (2) Upgrading of Bituminous Coals by the Agflotherm Process. Experimental procedures and data, bench and pilot scale equipments, etc., for beneficiating bituminous coals are described; (3) Soil Clean-up and Hydrocarbon Waste Treatment Process. Batch and pilot plant tests are described for soil contaminated by tar refuse from manufactured gas plant sites. (VC)

  4. Nuclear Technology. Course 30: Mechanical Inspection. Module 30-5, Surface Cleaning Inspection.

    Science.gov (United States)

    Wasel, Ed; Espy, John

    This fifth in a series of eight modules for a course titled Mechanical Inspection describes cleaning activities which typically apply to construction, maintenance, and modification activities at the nuclear power plant site. The module follows a typical format that includes the following sections: (1) introduction, (2) module prerequisites, (3)…

  5. Effectiveness of feeding large kibbles with mechanical cleaning properties in cats with gingivitis

    NARCIS (Netherlands)

    Vrieling, HE; Theyse, LFH; van Winkelhoff, AJ; Dijkshoorn, NA; Logan, EI; Picovet, P

    2005-01-01

    Effectiveness of feeding large kibbles with mechanical cleaning properties in cats with gingivitis periodontal disease is the most common acquired oral disease in cats. it starts with plaque accumulation and gingivitis. The aim of this study was to evaluate the effectiveness of different types of ki

  6. 石油储罐机械清洗系统%Large Oil Storage Tanks Mechanical Cleaning System

    Institute of Scientific and Technical Information of China (English)

    黄崇林; 蔡业彬; 何宏鹰

    2013-01-01

    Oil storage tanks need to be cleaned regularly during using .T he oil storage tanks me-chanical cleaning techniques is introduced ,including the main components of the oil storage tanks mechanical cleaning system for vacuum suction module device ,heat exchanger cleaning module e-quipment ,washing machines ,etc .The mechanical cleaning process of oil storage tanks is elabo-rated and the effective of the mechanical cleaning system of oil storage tanks is analyzed .%  对石油储罐机械清洗系统的主要组成部分真空抽吸模块设备、换热清洗模块设备、清洗机等进行了介绍,并对石油储罐机械清洗系统效益进行了分析。

  7. Study of Cu-Inhibitor State for Post-Chemical Mechanical Polishing Cleaning

    Science.gov (United States)

    Harada, Ken; Ito, Atsushi; Kawase, Yasuhiro; Suzuki, Toshiyuki; Hara, Makoto; Sakae, Rina; Kimura, Chiharu; Aoki, Hidemitsu

    2011-05-01

    In order to reduce corrosion on the Cu surface in post-chemical mechanical polishing (CMP) cleaning, controlling the state of inhibitor layers is indispensable. In this study, to investigate the behavior of inhibitor layers in the cleaning process, Cu-benzotriazole (BTA) layers on CuOX were analyzed by electrochemical measurements and surface analysis. Electrochemical measurements revealed that Cu(I)-BTA can prevent corrosion more efficiently than Cu(II)-BTA, and surface analysis revealed that the Cu(I)-BTA layer is thin, whereas the Cu(II)-BTA layer is bulky. The Cu(I)-BTA layer is effective in preventing corrosion of the Cu surface.

  8. Treatment analysis of incentive politics for renewable energy projects in the clean development mechanism (CDM): the Brazilian case; Analise do tratamento das politicas de incentivos a projetos de energias renovaveis no mecanismo de desenvolvimento limpo (MDL): o caso brasileiro

    Energy Technology Data Exchange (ETDEWEB)

    Medeiros, Anamelia; Hauser, Philipp, Emails: anameliam@yahoo.com.br, philipphauser@web.de

    2010-07-01

    This paper analyses the politics for mitigation recently adopted by the Brazil, and discuss his treatment under the rules of CDM, viewing to contribute for a transparent solution which to allow the conciliation global and national politics for the clean expansion of the energy sector in Brazil.

  9. ANNULUS CLOSURE TECHNOLOGY DEVELOPMENT INSPECTION/SALT DEPOSIT CLEANING MAGNETIC WALL CRAWLER

    Energy Technology Data Exchange (ETDEWEB)

    Minichan, R; Russell Eibling, R; James Elder, J; Kevin Kane, K; Daniel Krementz, D; Rodney Vandekamp, R; Nicholas Vrettos, N

    2008-06-01

    The Liquid Waste Technology Development organization is investigating technologies to support closure of radioactive waste tanks at the Savannah River Site (SRS). Tank closure includes removal of the wastes that have propagated to the tank annulus. Although amounts and types of residual waste materials in the annuli of SRS tanks vary, simple salt deposits are predominant on tanks with known leak sites. This task focused on developing and demonstrating a technology to inspect and spot clean salt deposits from the outer primary tank wall located in the annulus of an SRS Type I tank. The Robotics, Remote and Specialty Equipment (RRSE) and Materials Science and Technology (MS&T) Sections of the Savannah River National Laboratory (SRNL) collaborated to modify and equip a Force Institute magnetic wall crawler with the tools necessary to demonstrate the inspection and spot cleaning in a mock-up of a Type I tank annulus. A remote control camera arm and cleaning head were developed, fabricated and mounted on the crawler. The crawler was then tested and demonstrated on a salt simulant also developed in this task. The demonstration showed that the camera is capable of being deployed in all specified locations and provided the views needed for the planned inspection. It also showed that the salt simulant readily dissolves with water. The crawler features two different techniques for delivering water to dissolve the salt deposits. Both water spay nozzles were able to dissolve the simulated salt, one is more controllable and the other delivers a larger water volume. The cleaning head also includes a rotary brush to mechanically remove the simulated salt nodules in the event insoluble material is encountered. The rotary brush proved to be effective in removing the salt nodules, although some fine tuning may be required to achieve the best results. This report describes the design process for developing technology to add features to a commercial wall crawler and the results of the

  10. Research and development of Ro-boat: an autonomous river cleaning robot

    Science.gov (United States)

    Sinha, Aakash; Bhardwaj, Prashant; Vaibhav, Bipul; Mohommad, Noor

    2013-12-01

    Ro-Boat is an autonomous river cleaning intelligent robot incorporating mechanical design and computer vision algorithm to achieve autonomous river cleaning and provide a sustainable environment. Ro-boat is designed in a modular fashion with design details such as mechanical structural design, hydrodynamic design and vibrational analysis. It is incorporated with a stable mechanical system with air and water propulsion, robotic arms and solar energy source and it is proceed to become autonomous by using computer vision. Both "HSV Color Space" and "SURF" are proposed to use for measurements in Kalman Filter resulting in extremely robust pollutant tracking. The system has been tested with successful results in the Yamuna River in New Delhi. We foresee that a system of Ro-boats working autonomously 24x7 can clean a major river in a city on about six months time, which is unmatched by alternative methods of river cleaning.

  11. Clean energy development is a win-win-win for jobs, economic growth and the environment

    Energy Technology Data Exchange (ETDEWEB)

    Learner, H.A. [Environmental Law and Policy Center, IL (United States)

    2003-07-01

    The Environmental Law and Policy Center of Illinois has recently released several publications promoting clean energy development to improve environmental quality and public health for the Midwest. This presentation emphasized how the clean energy development plan can create new jobs and stimulate economic growth. For example, the electric power industry is currently relying on 1950's energy technology. Modernizing the electricity industry would be good for both the economy and the environment. Repowering the industry would promote energy efficiency and renewable energy sources. The presentation also compared a business-as-usual (BAU) scenario and a clean energy development plan scenario for 2010 and 2020. It was suggested that policy changes may be required to ensure change. In the BAU scenario, electricity demand would increase annually, large additions of natural gas capacity would be used to meet the demand, and coal plants would increase their output. Under the clean energy development plan, electricity demand would flatten out, coal and nuclear plants would be replaced with renewables (mostly wind) or clean, natural gas generation. Under the clean energy development plan NOx would be reduced by 71 per cent, SOx by 56 per cent, mercury by 50 per cent, and carbon dioxide by 51 per cent. The clean energy development plan improves the environment by reducing air and water pollution and improves electricity reliability. 8 tabs., 20 figs.

  12. Final report spent nuclear fuel retrieval system primary cleaning development testing

    Energy Technology Data Exchange (ETDEWEB)

    Ketner, G.L.; Meeuwsen, P.V.

    1997-09-01

    Developmental testing of the primary cleaning station for spent nuclear fuel (SNF) and canisters is reported. A primary clean machine will be used to remove the gross sludge from canisters and fuel while maintaining water quality in the downstream process area. To facilitate SNF separation from canisters and minimize the impact to water quality, all canisters will be subjected to mechanical agitation and flushing with the Primary Clean Station. The Primary Clean Station consists of an outer containment box with an internally mounted, perforated wash basket. A single canister containing up to 14 fuel assemblies will be loaded into the wash basket, the confinement box lid closed, and the wash basket rotated for a fixed cycle time. During this cycle, basin water will be flushed through the wash basket and containment box to remove and entrain the sludge and carry it out of the box. Primary cleaning tests were performed to provide information concerning the removal of sludge from the fuel assemblies while in the basin canisters. The testing was also used to determine if additional fuel cleaning is required outside of the fuel canisters. Hydraulic performance and water demand requirements of the cleaning station were also evaluated. Thirty tests are reported in this document. Tests demonstrated that sludge can be dislodged and suspended sufficiently to remove it from the canister. Examination of fuel elements after cleaning suggested that more than 95% of the exposed fuel surfaces were cleaned so that no visual evidence of remained. As a result of testing, recommendations are made for the cleaning cycle. 3 refs., 16 figs., 4 tabs.

  13. Self-cleaning and mechanical properties of modified white cement with nanostructured TiO2.

    Science.gov (United States)

    Khataee, R; Heydari, V; Moradkhannejhad, L; Safarpour, M; Joo, S W

    2013-07-01

    In the present study, self-cleaning and mechanical properties of white Portland cement by addition of commercial available TiO2 nanoparticles with the average particle size of 80 nm were investigated. X-ray diffraction (XRD), transmission electron microscopy (TEM) and BET were used to characterize TiO2 nanoparticles. For determination of self-cleaning properties of TiO2-modified white cement, colorimetric tests in decolorization of C.I. Basic Red 46 (BR46) in comparison to unmodified cement samples was applied. The results indicated that with increasing the amount of TiO2 nanoparticles in modified cement, self-cleaning property of the samples increased. The mechanical properties of TiO2-modified and unmodified cement samples, such as time of setting of hydraulic cement, compressive strength of hydraulic cement mortar and flexural strength of hydraulic cement mortar were examined. The results indicated that addition of TiO2 nanoparticles up to maximum replacement level of 1.0% improved compressive and flexural strength and decreased its setting time.

  14. Engineering development of advanced physical fine coal cleaning for premium fuel applications

    Energy Technology Data Exchange (ETDEWEB)

    Smit, F.J.; Jha, M.C.; Phillips, D.I.; Yoon, R.H.

    1997-04-25

    The goal of this project is engineering development of two advanced physical fine coal cleaning processes, column flotation and selective agglomeration, for premium fuel applications. Its scope includes laboratory research and bench-scale testing on six coals to optimize these processes, followed by design and construction of a 2 t/h process development unit (PDU). Large lots of clean coal are to be produced in the PDU from three project coals. Investigation of the near-term applicability of the two advanced fine coal cleaning processes in an existing coal preparation plant is another goal of the project and is the subject of this report.

  15. Clean Energy-Related Economic Development Policy across the States: Establishing a 2016 Baseline

    Energy Technology Data Exchange (ETDEWEB)

    Cook, Jeffrey J. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2017-01-01

    States implement clean energy-related economic development policy to spur innovation, manufacturing, and to address other priorities. This report focuses on those policies most directly related to expanding new and existing manufacturing. The extent to which states invest in this policymaking depends on political drivers and jurisdictional economic development priorities. To date, no one source has collected all of the clean energy-related economic development policies available across the 50 states. Thus, it is unclear how many policies exist within each state and how these policies, when implemented, can drive economic development. Establishing the baseline of existing policy is a critical first step in determining the potential holistic impact of these policies on driving economic growth in a state. The goal of this report is to document the clean energy-related economic development policy landscape across the 50 states with a focus on policy that seeks to expand new or existing manufacturing within a state. States interested in promoting clean energy manufacturing in their jurisdictions may be interested in reviewing this landscape to determine how they compare to peers and to adjust their policies as necessary. This report documents over 900 existing clean energy-related economic development laws, financial incentives (technology-agnostic and clean energy focused), and other policies such as agency-directed programs and initiatives across the states.

  16. Policies for accelerating access to clean energy, improving health, advancing development, and mitigating climate change.

    Science.gov (United States)

    Haines, Andy; Smith, Kirk R; Anderson, Dennis; Epstein, Paul R; McMichael, Anthony J; Roberts, Ian; Wilkinson, Paul; Woodcock, James; Woods, Jeremy

    2007-10-06

    The absence of reliable access to clean energy and the services it provides imposes a large disease burden on low-income populations and impedes prospects for development. Furthermore, current patterns of fossil-fuel use cause substantial ill-health from air pollution and occupational hazards. Impending climate change, mainly driven by energy use, now also threatens health. Policies to promote access to non-polluting and sustainable sources of energy have great potential both to improve public health and to mitigate (prevent) climate disruption. There are several technological options, policy levers, and economic instruments for sectors such as power generation, transport, agriculture, and the built environment. However, barriers to change include vested interests, political inertia, inability to take meaningful action, profound global inequalities, weak technology-transfer mechanisms, and knowledge gaps that must be addressed to transform global markets. The need for policies that prevent dangerous anthropogenic interference with the climate while addressing the energy needs of disadvantaged people is a central challenge of the current era. A comprehensive programme for clean energy should optimise mitigation and, simultaneously, adaption to climate change while maximising co-benefits for health--eg, through improved air, water, and food quality. Intersectoral research and concerted action, both nationally and internationally, will be required.

  17. Development of High Erosivity Well Scale Cleaning Tools

    Energy Technology Data Exchange (ETDEWEB)

    K. M. Kalumuck; G. L. Chahine; G. S. Frederick; P. D. Aley

    1999-07-01

    Build up of scale deposits on the walls of geothermal wells can occur rapidly due to the high dissolved solids content of geothermal fluids. Scale formation is a significant problem for both the well and for surface heat transfer equipment. Geothermal brines contain a wide variety if dissolved salts including carbonates, silicates, sulfates, and metal sulfides. One technology recently proposed for scale removal is the use of an ultrasonic device. In the present effort we apply cavitation in a more direct manner by the use of acoustically enhanced cavitating water jets which can be made to be much more efficient and aggressive than ultrasonic devices. Cavitating and self-resonating jet technologies have been proven to enhance the erosive power of liquid jets in a number of cutting, cleaning, and drilling applications. In this study we investigated two related technologies - one that employs cavitation and one that breaks the jet up into a series of slugs that produce water hammer type pressures upon impact. These technologies enable operation in both submerged and nonsubmerged conditions.

  18. Assessment of the development and implementation of tools in contract cleaning.

    Science.gov (United States)

    Öhrling, Therese; Kumar, Rupesh; Abrahamsson, Lena

    2012-07-01

    This paper illustrates and discusses problems with the implementation and use of ergonomic tools and techniques in the process of cleaning. Cleaning is an occupation with a high risk of developing work-related disorders. One high-strain task where recommended tools and techniques are difficult to apply is cleaning staircases. This study evaluated the muscular activity of cleaners while mopping staircases using two different mop handles and found that an easily adjustable mop handle can decrease a cleaner's physical load. The results also show that the implementation and contextualization of the mop are of great importance for how a mop is used. A more holistic approach is needed to improve the benefits of good tools and techniques in cleaning work. More research is needed on how workplace organization can be improved to support the implementation of strategies to increase the health of professional cleaners.

  19. Comparisons of peak ground reaction force and rate of force development during variations of the power clean.

    Science.gov (United States)

    Comfort, Paul; Allen, Mark; Graham-Smith, Phillip

    2011-05-01

    The aim of this investigation was to determine the differences in vertical ground reaction forces and rate of force development (RFD) during variations of the power clean. Elite rugby league players (n = 11; age 21 ± 1.63 years; height 181.56 ± 2.61 cm; body mass 93.65 ± 6.84 kg) performed 1 set of 3 repetitions of the power clean, hang-power clean, midthigh power clean, or midthigh clean pull, using 60% of 1-repetition maximum power clean, in a randomized order, while standing on a force platform. Differences in peak vertical ground reaction forces (F(z)) and instantaneous RFD between lifts were analyzed via 1-way analysis of variance and Bonferroni post hoc analysis. Statistical analysis revealed a significantly (p clean (2,801.7 ± 195.4 N) and the midthigh clean pull (2,880.2 ± 236.2 N) compared to both the power clean (2,306.24 ± 240.47 N) and the hang-power clean (2,442.9 ± 293.2 N). The midthigh power clean (14,655.8 ± 4,535.1 N·s⁻¹) and the midthigh clean pull (15,320.6 ± 3,533.3 N·s⁻¹) also demonstrated significantly (p clean (8,839.7 ± 2,940.4 N·s⁻¹) and the hang-power clean (9,768.9 ± 4,012.4 N·s⁻¹). From the findings of this study, when training to maximize peak F(z) and RFD the midthigh power clean and midthigh clean pull appear to be the most advantageous variations of the power clean to perform.

  20. Of the clean development mechanism to the program of activities: an analysis of the bio diesel and wind energy uses in Brazil; Do mecanismo de desenvolvimento limpo ao programa de atividades: uma analise do uso do biodiesel e da energia eolica no Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Rocha, Mayra Jupyara Braga

    2009-05-15

    The current actions of economic and industrial activities have resulted in increase of the concentration of greenhouse gases in the atmosphere since 1750. According to IPCC (2007) this alteration can increase the average temperature in the planet between 1,8 and 4,0 deg C up to 2100. The climate changes and the global warming are the most complicated environmental questions of our time and the actions took now will have effect on the future generations. In this context, a series of world-wide conferences and diverse scientific quarrels had occurred throughout the last decade, which culminated in the most important multilateral agreement firmed on climate changes, the Kyoto Protocol, signed in 1997. The Protocol is a landmark in the attempts of mitigation of the climate changes, since it established the commitment of the industrialized countries with emissions reduction targets of 5,2% to the level of 1990 emissions. To achieve such targets these countries count on three flexibilization mechanisms provided by the Kyoto Protocol: Joint implementation, Emission Trading and the Clean Development Mechanism (CDM) that it will be object of this study. The objective of this thesis is to carry through an evaluation of the CDM since its conception until the current days, searching to identify its dynamics and the main inherent gaps of this instrument and finally present two case studies of the bio diesel and wind energy uses in Brazil. (author)

  1. The influence and ethics of interest groups on policy incentives for clean energy development

    Science.gov (United States)

    Maguire, Mariana C.

    The clean energy revolution in the United States is not going to happen until diverse stakeholders in the coalition of clean energy proponents strengthen their cohesion and influence—two critical tools for interest group's to be successful in driving the formulation of public policy. Currently, clean energy technology and resource development is supported by a highly diverse coalition of interest groups such as environmental groups, health organizations, industry, and the Defense Department, whose primary goals are often unrelated. Yet their objectives are increasingly well served by pursuing clean energy development by pushing lawmakers for supportive policies. However, characteristics of this ad hoc coalition can hinder its influence and cohesion. Whereas, fossil fuel interests—exemplified by the coalition of oil proponents—are highly cohesive and influential. This thesis will analyze whether there is a correlation between public policies on clean energy, and the strength of interest group influence over those policy decisions. It will begin with an analysis of interest group theories. Next it will analyze the histories of the oil industry as the model opponent of clean energy policies, and the biofuels, wind energy, and solar energy industries as the model proponents of clean energy policies. The composition of the respective coalitions will reveal if they are diverse or similar, with broad or narrow goals, and other important characteristics. Their respective policy positions and messages will show what values are important to them, and the presidential support each coalition has been achieved, or failed to achieve, will provide further insight into their effectiveness. This thesis will then apply interest group theories to the supporter and opponent coalitions. Results obtained indicate that the coalition of oil interests is large, yet very cohesive and influential, while the coalition for clean energy is large, generally diffuse but with some important

  2. 大罐群机械清洗的对策与实践%Mechanical Cleaning Measures and Practice of Large Group of Tanks

    Institute of Scientific and Technical Information of China (English)

    王永强; 郭宏彬; 薛胜雄; 巴胜富; 苏吉鑫; 庞雷; 张的

    2013-01-01

    针对数量众多、大小不等、型式不同、罐内介质不同的大型储油罐群的罐底油泥机械清洗困难,笔者结合工程实践,研制了大型罐和小型罐各不相同的清洗成套设备,提出了大型罐顶部作业和小型罐人孔作业各不相同的清洗成套设备和应用工艺方法,并从工程管理上总结了合理错开设备、同步作业、在工期内高效把握个罐周期和群罐关系,清罐设备的研发与应用经验.%How does a large oil storage tank group, which includes more than a dozen, dozens of different sizes, different types, different medium tanks ,tank bottom oil sludge be mechanical cleaned. Although the large tank mechanical cleaning has been applied, but such a real and complex problems still need from the equipment, technology and management to deal with. Based on engineering practice, the different cleaning equipments for large tank and small one has developed, different cleaning e-quipment for large tank top operation and small tank manhole operation and different operation methods was put forward, it was summarized rational staggered device, synchronous operation, held the relations of a tank cleaning cycle and tank group with high efficiency in time, tank cleaning equipment research and experience of development and application.

  3. Engineering Development of Advanced Physical Fine Coal Cleaning for Premium Fuel Applications

    Energy Technology Data Exchange (ETDEWEB)

    Smit, Frank J; Schields, Gene L; Jha, Mehesh C; Moro, Nick

    1997-09-26

    The ash in six common bituminous coals, Taggart, Winifrede, Elkhorn No. 3, Indiana VII, Sunnyside and Hiawatha, could be liberated by fine grinding to allow preparation of clean coal meeting premium fuel specifications (< 1- 2 lb/ MBtu ash and <0.6 lb/ MBtu sulfur) by laboratory and bench- scale column flotation or selective agglomeration. Over 2,100 tons of coal were cleaned in the PDU at feed rates between 2,500 and 6,000 lb/ h by Microcel™ column flotation and by selective agglomeration using recycled heptane as the bridging liquid. Parametric testing of each process and 72- hr productions runs were completed on each of the three test coals. The following results were achieved after optimization of the operating parameters: The primary objective was to develop the design base for commercial fine coal cleaning facilities for producing ultra- clean coals which can be converted into coal-water slurry premium fuel. The coal cleaning technologies to be developed were advanced column flotation and selective agglomeration, and the goal was to produce fuel meeting the following specifications.

  4. Nanostructured Zn and ZnO nanowire thin films for mechanical and self-cleaning applications

    Energy Technology Data Exchange (ETDEWEB)

    Shaik, Ummar Pasha [Advanced Centre of Research in High Energy Materials, University of Hyderabad, Prof. C R Rao Road, Gachibowli, Hyderabad 500046 (India); Purkayastha, Debarun Dhar, E-mail: ddebarun@yahoo.com [Department of Physics, National Institute of Technology Nagaland, Chumukedima, Dimapur 797103 (India); Krishna, M. Ghanashyam [Advanced Centre of Research in High Energy Materials, University of Hyderabad, Prof. C R Rao Road, Gachibowli, Hyderabad 500046 (India); School of Physics, University of Hyderabad, Prof. C R Rao Road, Gachibowli, Hyderabad 500046 (India); Madhurima, V. [Department of Physics, Central University of Tamil Nadu, Thiruvarur 610004 (India)

    2015-03-01

    Highlights: • Zn metal films were deposited by thermal evaporation, on various substrates. • Upon annealing Zn there is transformation of the Zn nanosheets into ZnO nanowires. • ZnO nanowires are superhydrophobic and exhibit wetting transition on UV exposure. • ZnO will be useful in self-cleaning, mechanical and oxidation resistance surfaces. - Abstract: Nanostructured Zn metal films were deposited by thermal evaporation, on borosilicate glass, Quartz, sapphire, lanthanum aluminate and yttria stabilized zirconia substrates. The as-deposited films are nanocrystalline and show a morphology that consists of triangular nanosheets. The films are hydrophobic with contact angles between 102° and 120° with hardness and Young's modulus between 0.15–0.8 GPa and 18–300 GPa, respectively. Thermal annealing of the films at 500 °C results only in partial oxidation of Zn to ZnO, which indicates good oxidation resistance. Annealing also causes transformation of the Zn nanosheets into ZnO nanowires that are polycrystalline in nature. The ZnO nanowires are superhydrophobic with contact angles between 159° and 162°, contact angle hysteresis between 5° and 10° and exhibit a reversible superhydrophobic–hydrophilic transition under UV irradiation. The nanowires are much softer than the as-deposited Zn metal films, with hardness between 0.02 and 0.4 GPa and Young's modulus between 3 and 35 GPa. The current study thus demonstrates a simple process for fabrication of nanostructured Zn metal films followed by a one-step transformation to nanowires with properties that will be very attractive for mechanical and self-cleaning applications.

  5. Biofilm development on new and cleaned membrane surfaces

    NARCIS (Netherlands)

    Bereschenko, L.A.

    2010-01-01

    This thesis presents a comprehensive research report on microbiological aspects of biofouling occurrence in full-scale reverse osmosis (RO) systems. Biofouling is a process in which microorganisms attach to membranes and develop into a thick film that can choke the entire RO system. Management of th

  6. Clean Development Mechanism: Laterite as Supplementary Cementing Material (SCM

    Directory of Open Access Journals (Sweden)

    Syed Zaighum Abbass

    2013-02-01

    Full Text Available Carbon dioxide (CO2 a major Green House Gas (GHG in the atmosphere, is believed to be largely responsible for global climate change through industrial emissions. The level of CO2 concentration has exponentially increased from about 280 ppm at the start of the industrial revolution to about 380 ppm to date. Although Kyoto protocol has bound industrialized nations to reduce green house gas emissions by 5.2% below 1990 levels around year 2008-2012, but violation continues. The cement industry is one of the major emitter of green house gases, particularly CO2 due to its energy intensive production process. It is estimated that approximately 1 tone of CO2 is released during the manufacturing of each tone of Portland cement. Most of CO2 emissions originate from burning fossil fuels and de-carbonization of limestone in a cement plant. During past several decades, the use of by-product materials in concrete, either as components of blended cements or as admixtures, has increased significantly. In this study, another alternate Supplementary Cementing Material (SCM, Laterite has been used with the objectives: to evaluate the performance of cement containing different percentages of laterite (5, 10, 15, 20, 25, and 30 %; to identify the optimum replacement percentage; and to investigate the effects of different concentrations of laterite on various properties of cement. For that purpose, laterite was tested: before blending (for elemental and mineralogical composition by using XRF, SEM and XRD: after blending (Elemental analysis using XRF, fineness test by using Blaine’s air permeability test and for particle size % on 45, 90 and 200 µ sieve, respectively; and after hydration (for mineralogical analysis using SEM. Furthermore, physical tests of manufactured cement, i.e., water consistency, setting time, Le-Chatlier-expansion and compressive strength were also evaluated and compared with limestone and fly-ash cement blends. The results show that with the replacement level of up to 15%, the quality of cement is not disturbed. In addition, the requirement of intake of energy has also decreased (~30%. Current findings indicate that by using Laterite, as SCM, cement production can be increased without consuming more energy and hence reduce GHG emissions.

  7. Recent developments in novel sorbents for flue gas clean up

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Yan; Bisson, Teresa M.; Yang, Hongqun; Xu, Zhenghe [Department of Chemical and Materials Engineering, University of Alberta, Edmonton, Alberta (Canada)

    2010-10-15

    Coal combustion is one of the most important energy sources for electricity generation, but also produces airborne pollutants. The amount of SO{sub 2} and NO{sub x} for example, is in the order of hundreds to thousands of ppm, and tens to hundreds of ppm, respectively, while Hg in flue gases could be up to tens to hundreds of ppb. Flue gas desulphurization technology is already in place for SO{sub 2} removal, and new sorbents such as zeolites are being investigated for such an application. NO{sub x} can be removed by selective catalytic reduction with various catalysts. Mercury is the hardest to remove due to its persistent nature and relatively low concentration in flue gases. New sorbents have also been developed for mercury removal applications. A current trend in flue gas emission control is to remove Hg, NO{sub x} and SO{sub 2} simultaneously. Various catalytic sorbents have been investigated to remove two or more of these pollutants concurrently. This article reviews recent developments made for emission control of coal-fired power plant flue gases using novel sorbents to target individual or multiple pollutants. (author)

  8. Application of the mechanism of clean development - MDL to the projects of PCHs operating in isolated system in Brazil; A aplicacao dos mecanismos de desenvolvimento limpo - MDL - em projetos de implantacao de pequenas centrais hidreletricas - PCHs em sistemas isolados no Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Nunes, Camila Fernandes

    2006-07-01

    The present work considered to analyze the potential of application of the Mechanism of Clean Development - MDL to the projects of PCHs operating in isolated system. For in such a way, the emissions of gases of effect had been entered greenhouse - GEEs proceeding from a thermoelectric plant operating with diverse types of fuels: oil diesel, combustible oil, natural gas and coal and the emissions of one hydropower plant - a PCH. For comparison effect two scenes of performance of a PCH had been considered standard of 15MW: the first one corresponding to an area flooded of 3km{sup 2} and according to an area of 13km{sup 2}. Had the absence of data of emissions of GEEs for PCHs, a correlation with data of available CO{sub 2} emission of the UHE Curua-Una was established (chosen for the availability of referring data the measurements C-CO{sub 2} emission). The values calculated for the method of chamber of diffusion, which had most of the carbon emissions proceeding from hydropower reservoirs had been used to be proceeding from the diffusion of CO{sub 2} in the surface. The gotten results had demonstrated that it is possible if to credit of the benefits of the MDL through the implantation of PCHs operating in isolated systems in substitution the thermal plants. (author)

  9. Comparison of high-intensity sound and mechanical vibration for cleaning porous titanium cylinders fabricated using selective laser melting.

    Science.gov (United States)

    Seiffert, Gary; Hopkins, Carl; Sutcliffe, Chris

    2017-01-01

    Orthopedic components, such as the acetabular cup in total hip joint replacement, can be fabricated using porous metals, such as titanium, and a number of processes, such as selective laser melting. The issue of how to effectively remove loose powder from the pores (residual powder) of such components has not been addressed in the literature. In this work, we investigated the feasibility of two processes, acoustic cleaning using high-intensity sound inside acoustic horns and mechanical vibration, to remove residual titanium powder from selective laser melting-fabricated cylinders. With acoustic cleaning, the amount of residual powder removed was not influenced by either the fundamental frequency of the horn used (75 vs. 230 Hz) or, for a given horn, the number of soundings (between 1 and 20). With mechanical vibration, the amount of residual powder removed was not influenced by the application time (10 vs. 20 s). Acoustic cleaning was found to be more reliable and effective in removal of residual powder than cleaning with mechanical vibration. It is concluded that acoustic cleaning using high-intensity sound has significant potential for use in the final preparation stages of porous metal orthopedic components. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 117-123, 2017.

  10. N.3663 report realized for the Foreign Affairs Commission on the law project n. 3274, authorizing the approbation of the agreement between France and United States of Mexico on the mechanism of clean development in the framework of the Kyoto protocol; N. 3663 rapport fait au nom de la Commission des Affaires Etrangeres sur le projet de loi n. 3274, autorisant l'approbation de l'accord entre la France et les Etats-Unis du Mexique sur le mecanisme de developpement propre dans le cadre du protocole de Kyoto

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-02-15

    The clean development mechanism is one of the Kyoto protocol flexible mechanisms. It is intended to allow industrialized countries to offset their greenhouse gas reduction targets by funding projects in developing countries that lead to reduced emissions. In this framework, this law project aims to favor the cooperation between France and Mexico. The first part presents the advantages of the Kyoto protocol ane second part is devoted to the bilateral cooperation. (A.L.B.)

  11. LIFE: a sustainable solution for developing safe, clean fusion power.

    Science.gov (United States)

    Reyes, Susana; Dunne, Mike; Kramer, Kevin; Anklam, Tom; Havstad, Mark; Mazuecos, Antonio Lafuente; Miles, Robin; Martinez-Frias, Joel; Deri, Bob

    2013-06-01

    The National Ignition Facility (NIF) at the Lawrence Livermore National Laboratory (LLNL) in California is currently in operation with the goal to demonstrate fusion energy gain for the first time in the laboratory-also referred to as "ignition." Based on these demonstration experiments, the Laser Inertial Fusion Energy (LIFE) power plant is being designed at LLNL in partnership with other institutions with the goal to deliver baseload electricity from safe, secure, sustainable fusion power in a time scale that is consistent with the energy market needs. For this purpose, the LIFE design takes advantage of recent advances in diode-pumped, solid-state laser technology and adopts the paradigm of Line Replaceable Units used on the NIF to provide high levels of availability and maintainability and mitigate the need for advanced materials development. The LIFE market entry plant will demonstrate the feasibility of a closed fusion fuel cycle, including tritium breeding, extraction, processing, refueling, accountability, and safety, in a steady-state power-producing device. While many fusion plant designs require large quantities of tritium for startup and operations, a range of design choices made for the LIFE fuel cycle act to reduce the in-process tritium inventory. This paper presents an overview of the delivery plan and the preconceptual design of the LIFE facility with emphasis on the key safety design principles being adopted. In order to illustrate the favorable safety characteristics of the LIFE design, some initial accident analysis results are presented that indicate potential for a more attractive licensing regime than that of current fission reactors.

  12. Mechanisms in Plant Development

    Energy Technology Data Exchange (ETDEWEB)

    Hake, Sarah [USDA ARS Plant Gene Expression Center

    2013-08-21

    This meeting has been held every other year for the past twenty-two years and is the only regularly held meeting focused specifically on plant development. Topics covered included: patterning in developing tissues; short and long distance signaling; differentiation of cell types; the role of epigenetics in development; evolution; growth.

  13. Carbon Emission Option Pricing Calculation and Clean Development Mechanism Strategy of Jiangsu:Based on the Pricing Analysis of B-S Model%江苏碳排放期权价格测算及清洁发展机制对策--基于B-S模型的定价分析

    Institute of Scientific and Technical Information of China (English)

    吕晓玥; 简迎辉; 许长新

    2014-01-01

    It is a tendency to develop low-carbon economy and lift the ability of carbon trade and clean development. Through potential analysis of CDM project progress, economy foundation and resource endowment to developing the carbon trade market of Jiangsu companies, we can find that this district possesses huge space for energy conservation and emissions reduction. Besides, we have introduced real option theory to study of the carbon trading mechanism of empirical research, by using the B-S pricing model and European carbon option trade market data, constructed a carbon option pricing model, then based on the similarity economy comparison between European Union and Jiangsu province, obtained the discounted carbon trading market price of Jiangsu area. at last, around technology, management and policies levels to putting forward some relevant suggestions and measures on CDM mechanism provided beneficial basis and references to Jiangsu companies in stepwise development of carbon trading market under CDM mechanism.%发展低碳经济,提升碳交易与清洁发展能力已是大势所趋。文章通过对CDM项目进展、经济基础与资源禀赋等方面对江苏省内企业发展碳交易市场进行潜力分析后发现,该地区存在巨大的节能减排空间。实证研究中将实物期权理论引入碳交易机制,借助B-S模型及欧盟碳交易市场相关数据构造出碳排放期权定价模型,根据欧盟与江苏经济发展的相似性折扣给出江苏地区碳交易的市场定价,同时,围绕技术、管理及政策三个层面提出该地区CDM机制的新型思路建议,旨在为江苏企业在清洁发展机制下逐步开发完善碳交易市场提供有利依据与参考。

  14. Preperation for a Clean Surface

    Directory of Open Access Journals (Sweden)

    Aurimas Ralys

    2012-12-01

    Full Text Available The article reviews techniques for preparing clean surfaces used in the manufacturing process, considers the types of clean surfaces and their role in modern production and provides the classification methods of arranging such surfaces. The paper also discusses the principles of methods for solvent cleaning, aqueous cleaning, ultrasonic cleaning, precision cleaning and mechanical cleaning. The study focuses on the possibility of adjusting a clean surface using a water flow, including cavitation.Article in Lithuanian

  15. Preperation for a Clean Surface

    Directory of Open Access Journals (Sweden)

    Aurimas Ralys

    2013-02-01

    Full Text Available The article reviews techniques for preparing clean surfaces used in the manufacturing process, considers the types of clean surfaces and their role in modern production and provides the classification methods of arranging such surfaces. The paper also discusses the principles of methods for solvent cleaning, aqueous cleaning, ultrasonic cleaning, precision cleaning and mechanical cleaning. The study focuses on the possibility of adjusting a clean surface using a water flow, including cavitation.Article in Lithuanian

  16. Development of a Stable TiO2 Nanocomposite Self-Cleaning Coating for Outdoor Applications

    Directory of Open Access Journals (Sweden)

    F. Madidi

    2016-01-01

    Full Text Available A convenient and low-cost approach for the elaboration of a stable superhydrophobic coating is reported, involving the use of TiO2 nanoparticles via the spray coating method. This method can be used for preparing self-cleaning superhydrophobic coatings on large areas for different kinds of substrates. The synergistic effect of the micro/nanobinary scale roughness was produced by a multilayer RTV SR/TiO2 composite. The influence of the nanofiller concentration in a specific frequency range (40 Hz to 2 MHz on the dielectric behavior was analyzed as well. It was found that the real relative permittivity (εr′ increases as the nanofiller concentration increases. Superhydrophobic behavior is analyzed by contact angle measurements, scanning electron microscopy (SEM, and profilometer. The stability of the developed coating also has been evaluated in terms of immersion in various aqueous solutions, heating, adhesion, and exposure to UV irradiation, and the results showed good stability against these factors. The coating retained its superhydrophobicity after several days of immersion in solutions of different pH levels (2, 4, 6, and 12 and different conductivities. In addition, they also exhibited exceptional stability against UV radiation and heating, as well as good mechanical stability.

  17. Nuclear and clean coal technology options for sustainable development in India

    Energy Technology Data Exchange (ETDEWEB)

    Mallah, Subhash; Bansal, N.K. [Shri Mata Vaishno Devi University, Katra -182320, Jammu and Kashmir (India)

    2010-07-15

    Due to the growing energy needs along with increasing concerns towards control of greenhouse gas emissions, most developing countries are under pressure to find alternative methods for energy conversion and policies to make these technologies economically viable. Most of the energy is produced from fossil fuel in India which is not a sustainable source of energy. In this paper Indian power sector has been examined by using MARKAL model for introduction of clean coal and advanced nuclear technologies with implementation of energy conservation potential. The result shows that application of clean technologies gives energy security but not significant reduction in carbon dioxide emissions. When clean technologies apply with energy conservation a huge amount of CO{sub 2} can be reduced and also economically viable. Three scenarios including base case scenario have been developed to estimate the resource allocations and CO{sub 2} mitigation. The clean technologies with maximum savings potential shows 70% CO{sub 2} reduction in the year 2045. (author)

  18. Textile Dry Cleaning Using Carbon Dioxide: Process, Apparatus and Mechanical Action

    NARCIS (Netherlands)

    Sutanto, S.

    2014-01-01

    Fabrics that are sensitive to water, may wrinkle or shrink when washed in regular washing machines and are usually cleaned by professional dry cleaners. Dry cleaning is a process of removing soils from substrate, in this case textile, using a non-aqueous solvent. The most common solvent in conventio

  19. Application of towel mechanical cleaning method in floor cleaning and disinfection of operation room%地巾机械清洗方法在手术室地面清洁工作中的应用

    Institute of Scientific and Technical Information of China (English)

    陈锐; 李静; 徐少珍

    2014-01-01

    目的:探讨地巾机械清洗方法在手术室地表清洁工作中的作用。方法采用拖把手工清洗方法和地巾机械清洗方法对50间手术间进行术后清洁,并对地面、拖把、地巾进行微生物监测。结果机械地巾组清洁的手术间地面合格率(96浇.0%)高于手工拖把组合格率(82.0%)。地巾清洗合格率明显高于拖把。结论采用地巾机械清洗方法对手术间地面进行清洁,减少了手术室内细菌扩散,是防止手术感染的重要环节。%Objective To explore the effects of towel mechanical cleaning method in floor cleaning and disinfection of operation rooms .Methods Mop manual cleaning method and towel mechanical cleaning method were used to clean floor of 50 operation rooms .Floors in operation rooms ,mops ,towels were checked by microbial monitoring .Results Disinfection qualified rate of operation room floors by towel mechanical cleaning method was higher than that by mop manual cleaning method (96 -.0% vs 82 .0% ) . Cleaning qualified rate of towel was significantly higher than that of mop .Conclusion Floor cleaning and disinfection by towel mechanical cleaning method can reduce bacteria diffusion in operation rooms ,and it is an important link to prevent operation infection .

  20. Nanostructured Zn and ZnO nanowire thin films for mechanical and self-cleaning applications

    Science.gov (United States)

    Shaik, Ummar Pasha; Purkayastha, Debarun Dhar; Krishna, M. Ghanashyam; Madhurima, V.

    2015-03-01

    Nanostructured Zn metal films were deposited by thermal evaporation, on borosilicate glass, Quartz, sapphire, lanthanum aluminate and yttria stabilized zirconia substrates. The as-deposited films are nanocrystalline and show a morphology that consists of triangular nanosheets. The films are hydrophobic with contact angles between 102° and 120° with hardness and Young's modulus between 0.15-0.8 GPa and 18-300 GPa, respectively. Thermal annealing of the films at 500 °C results only in partial oxidation of Zn to ZnO, which indicates good oxidation resistance. Annealing also causes transformation of the Zn nanosheets into ZnO nanowires that are polycrystalline in nature. The ZnO nanowires are superhydrophobic with contact angles between 159° and 162°, contact angle hysteresis between 5° and 10° and exhibit a reversible superhydrophobic-hydrophilic transition under UV irradiation. The nanowires are much softer than the as-deposited Zn metal films, with hardness between 0.02 and 0.4 GPa and Young's modulus between 3 and 35 GPa. The current study thus demonstrates a simple process for fabrication of nanostructured Zn metal films followed by a one-step transformation to nanowires with properties that will be very attractive for mechanical and self-cleaning applications.

  1. The project mechanism law: Germany's CO2 trading becomes international. Introduction of project-related mechanisms in German law[Joint Implementation (JI), Clean Development Mechanism (CDM)]; Das Projekt-Mechanismen-Gesetz: Deutschlands CO{sub 2}-Handel wird international. Die Einfuehrung der projektbezogenen Mechanismen in das deutsche Recht

    Energy Technology Data Exchange (ETDEWEB)

    Reuter, A.; Loewer, T. [Rechtsanwaltssozietaet White und Case, Dusseldorf (Germany)

    2006-07-15

    With the legislation on project mechanisms in September 2005, the Kyoto Protocol and the EU Linking Directive have been integrated in German law. Germany can now use CDM and JI projects as an investor country and host country; for the German industry, there is a wider range of tools for meeting their emission reduction obligations and also a wider offer of opportunities for trading and arbitrage. (orig.)

  2. Comparison of H2 and He carbon cleaning mechanisms in extreme ultraviolet induced and surface wave discharge plasmas

    CERN Document Server

    Dolgov, A; Rachimova, T; Kovalev, A; Vasilyeva, A; Lee, C J; Krivtsun, V M; Yakushev, O; Bijkerk, F

    2013-01-01

    Cleaning of contamination of optical surfaces by amorphous carbon (a-C) is highly relevant for extreme ultraviolet (EUV) lithography. We have studied the mechanisms for a-C removal from a Si surface. By comparing a-C removal in a surface wave discharge (SWD) plasma and an EUV-induced plasma, the cleaning mechanisms for hydrogen and helium gas environments were determined. The C-atom removal per incident ion was estimated for different sample bias voltages and ion fluxes. It was found that H2 plasmas generally had higher cleaning rates than He plasmas: up to seven times higher for more negatively biased samples in EUV induced plasma. Moreover, for H2, EUV induced plasma was found to be 2-3 times more efficient at removing carbon than the SWD plasma. It was observed carbon removal during exposure to He is due to physical sputtering by He+ ions. In H2, on the other hand, the increase in carbon removal rates is due to chemical sputtering. This is a new C cleaning mechanism for EUV-induced plasma, which we call "E...

  3. ENGINEERING DEVELOPMENT OF ADVANCED PHYSICAL FINE COAL CLEANING FOR PREMIUM FUEL APPLICATIONS

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1997-06-01

    Bechtel, together with Amax Research and Development Center (Amax R&D), has prepared this study which provides conceptual cost estimates for the production of premium quality coal-water slurry fuel (CWF) in a commercial plant. Two scenarios are presented, one using column flotation technology and the other the selective agglomeration to clean the coal to the required quality specifications. This study forms part of US Department of Energy program "Engineering Development of Advanced Physical Fine Coal Cleaning for Premium Fuel Applications," (Contract No. DE-AC22- 92PC92208), under Task 11, Project Final Report. The primary objective of the Department of Energy program is to develop the design base for prototype commercial advanced fine coal cleaning facilities capable of producing ultra-clean coals suitable for conversion to stable and highly loaded CWF. The fuels should contain less than 2 lb ash/MBtu (860 grams ash/GJ) of HHV and preferably less than 1 lb ash/MBtu (430 grams ash/GJ). The advanced fine coal cleaning technologies to be employed are advanced column froth flotation and selective agglomeration. It is further stipulated that operating conditions during the advanced cleaning process should recover not less than 80 percent of the carbon content (heating value) in the run-of-mine source coal. These goals for ultra-clean coal quality are to be met under the constraint that annualized coal production costs does not exceed $2.5 /MBtu ($ 2.37/GJ), including the mine mouth cost of the raw coal. A further objective of the program is to determine the distribution of a selected suite of eleven toxic trace elements between product CWF and the refuse stream of the cleaning processes. Laboratory, bench-scale and Process Development Unit (PDU) tests to evaluate advanced column flotation and selective agglomeration were completed earlier under this program with selected coal samples. A PDU with a capacity of 2 st/h was designed by Bechtel and installed at Amax R

  4. Mechanically durable, superomniphobic coatings prepared by layer-by-layer technique for self-cleaning and anti-smudge.

    Science.gov (United States)

    Brown, Philip S; Bhushan, Bharat

    2015-10-15

    Superomniphobic surfaces are of interest for anti-fouling, self-cleaning, anti-smudge and low-drag applications. Many bioinspired surfaces developed previously are of limited use due to a lack of mechanical durability. From a previously developed technique, an adapted layer-by-layer approach involving charged species with electrostatic interactions between layers is combined with an uncharged fluorosilane layer to result in a durable, superomniphobic coating. This technique can provide the flexibility needed to improve adhesion to the substrate with the addition of a low surface tension coating at the air interface. In this work, polyelectrolyte binder, SiO2 nanoparticles, and fluorosilane layers are deposited, providing the combination of surface roughness and low surface tension to result in a superomniphobic coating with droplets of liquids with surface tensions from 72 to 21 mN m(-1) displaying contact angles exceeding 155° with low tilt angles. The durability of these coatings was examined through the use of micro- and macrowear experiments. These coatings currently display levels of transparency acceptable for automotive applications. Fabrication via this novel combination of techniques results in durable, superomniphobic coatings displaying improved performance compared to existing work where either the durability or the repellency is compromised.

  5. Engineering development of advanced physical fine coal cleaning technologies - froth flotation

    Energy Technology Data Exchange (ETDEWEB)

    Ferris, D.D.; Bencho, J.R. [ICF Kaiser Engineers, Inc., Pittsburgh, PA (United States)

    1995-11-01

    In 1988, ICF Kaiser Engineers was awarded DOE Contract No. DE-AC22-88PC88881 to research, develop, engineer and design a commercially acceptable advanced froth flotation coal cleaning technology. The DOE initiative is in support of the continued utilization of our most abundant energy resource. Besides the goal of commercialability, coal cleaning performance and product quality goals were established by the DOE for this and similar projects. primary among these were the goals of 85 percent energy recovery and 85 percent pyrite rejection. Three nationally important coal resources were used for this project: the Pittsburgh No. 8 coal, the Upper Freeport coal, and the Illinois No. 6 coal. Following is a summary of the key findings of this project.

  6. Joint venture capital investment for clean technologies and their problems in developing countries.

    Science.gov (United States)

    Doelle, H W

    1996-09-01

    All technological developments are aimed at improving the quality of life of a community of people. Biotechnology is a technology which allows the exploitation of microorganisms, plants and animal cells to take place within an economic framework. Developing countries are looking for programmes achieving sustainable, economical growth conducive to a higher per capita income of the community. Any joint venture which promises social advances and economic benefits will have to be rural-based. This presentation discusses the need for a change in fermentation industry attitudes to allow joint venture capital investment in clean technologies together with the problems developing countries face for the implementation of such technologies.

  7. CDM项目的经济性分析——太阳能发电在中国商业楼宇中的导入%Economic Analysis of a Clean Development Mechanism Project: a Case Introducing Photovoltaic System in a Commercial Building in China

    Institute of Scientific and Technical Information of China (English)

    任洪波; 高伟俊; 阮应君

    2007-01-01

    In this study, a case study of the installation of a photovoltaic (PV) system as a potential Clean Development Mechanism (CDM) project for a commercial building in China was performed by using a newly developed mathematical programming model. The model, which was developed to optimize the installation capacity of the PV system subjected to the constraints on electricity supply and demand balances, was adopted to carry out parametric surveys of PV investment and electricity price. The resultant calculations reveal that, in some cases, the PV system will be voluntarily introduced in China, and that the PV system can be certified as a CDM project with financial support by the investor country. In some combination of parameters, the value of CO2 emission reduction credit offsets the PV capital cost, although the shared allocation of economic profits yielded by the CDM project between the two countries greatly mitigates the restraints on the project, while at the same time qualifying it for the CDM.%运用数学模型,对在中国的商业楼宇中以清洁发展机制(CDM)的方式导入太阳能发电进行了分析.该模型可以在满足电力供求平衡的前提下确定最佳的导入容量.运用该模型对投资费用和电价进行了参数分析.分析结果表明,在一定的条件下,即使没有CDM的参与,在中国的商业楼宇中导入太阳能发电也是可行的.但是,通过CDM项目,可以极大地减小太阳能发电的导入壁垒,CO2的减排收益也可弥补太阳能发电的投资费用,使项目双方都获得相应的利益.

  8. Gas-Liquid Supersonic Cleaning and Cleaning Verification Spray System

    Science.gov (United States)

    Parrish, Lewis M.

    2009-01-01

    NASA Kennedy Space Center (KSC) recently entered into a nonexclusive license agreement with Applied Cryogenic Solutions (ACS), Inc. (Galveston, TX) to commercialize its Gas-Liquid Supersonic Cleaning and Cleaning Verification Spray System technology. This technology, developed by KSC, is a critical component of processes being developed and commercialized by ACS to replace current mechanical and chemical cleaning and descaling methods used by numerous industries. Pilot trials on heat exchanger tubing components have shown that the ACS technology provides for: Superior cleaning in a much shorter period of time. Lower energy and labor requirements for cleaning and de-scaling uper.ninih. Significant reductions in waste volumes by not using water, acidic or basic solutions, organic solvents, or nonvolatile solid abrasives as components in the cleaning process. Improved energy efficiency in post-cleaning heat exchanger operations. The ACS process consists of a spray head containing supersonic converging/diverging nozzles, a source of liquid gas; a novel, proprietary pumping system that permits pumping liquid nitrogen, liquid air, or supercritical carbon dioxide to pressures in the range of 20,000 to 60,000 psi; and various hoses, fittings, valves, and gauges. The size and number of nozzles can be varied so the system can be built in configurations ranging from small hand-held spray heads to large multinozzle cleaners. The system also can be used to verify if a part has been adequately cleaned.

  9. Development of advanced coal cleaning process; Kodo sekitan kaishitsu gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Osaka, S. [Center for Coal Utilization, Japan, Tokyo (Japan); Akimoto, A.; Yamashita, T. [Idemitsu Kosan Co. Ltd., Tokyo (Japan)

    1996-09-01

    This paper aims to develop a clean coal production process which excellently removes environmental pollutant, is low-costed, and need no particular systems for distribution of products. The result of the development was described paying attention to column flotation which is a technology to high-efficiently select particulate regions, particulate heavy media cyclone, magnetic separation, and the basic design of the process into which those above were integrated. The two-stage selection process, which is an integration of column flotation and particulate heavy media cyclone into the conventional coal preparation equipment, can produce low-ash clean coal at high separation efficiency and also suppress the rise in processing cost. This process was also effective for removal of sulfur content and trace metal elements. The use of clean coal at power plant can be effective for not only the reduction in ash treatment amount, but the aspect of boiler operation characteristics such as heat transfer efficiency of boiler furnace wall, ash related troubles, loads of electrostatic precipitator, loads of flue gas desulfurization facilities. 17 figs., 5 tabs.

  10. Engineering development of advanced physical fine coal cleaning for premium fuel applications

    Energy Technology Data Exchange (ETDEWEB)

    Shields, G.L.; Smit, F.J.; Jha, M.C.

    1997-08-28

    The primary goal of this project is the engineering development of two advanced physical fine coal cleaning processes, column flotation and selective agglomeration, for premium fuel applications. The project scope included laboratory research and bench-scale testing on six coals to optimize these processes, followed by the design, construction and operation of 2 t/hr process development unit (PDU). This report represents the findings of the PDU Advanced Column Flotation Testing and Evaluation phase of the program and includes a discussion of the design and construction of the PDU. Three compliance steam coals, Taggart, Indiana VII and Hiawatha, were processed in the PDU to determine performance and design parameters for commercial production of premium fuel by advanced flotation. Consistent, reliable performance of the PDU was demonstrated by 72-hr production runs on each of the test coals. Its capacity generally was limited by the dewatering capacity of the clean coal filters during the production runs rather than by the flotation capacity of the Microcel column. The residual concentrations of As, Pb, and Cl were reduced by at least 25% on a heating value basis from their concentrations in the test coals. The reduction in the concentrations of Be, Cd, Cr, Co, Mn, Hg, Ni and Se varied from coal to coal but the concentrations of most were greatly reduced from the concentrations in the ROM parent coals. The ash fusion temperatures of the Taggart and Indiana VII coals, and to a much lesser extent the Hiawatha coal, were decreased by the cleaning.

  11. A comparison of methods for determining the rate of force development during isometric midthigh clean pulls.

    Science.gov (United States)

    Haff, G Gregory; Ruben, Ryan P; Lider, Joshua; Twine, Corey; Cormie, Prue

    2015-02-01

    Twelve female division I collegiate volleyball players were recruited to examine the reliability of several methods for calculating the rate of force development (RFD) during the isometric midthigh clean pull. All subjects were familiarized with the isometric midthigh clean pull and participated in regular strength training. Two isometric midthigh clean pulls were performed with 2 minutes rest between each trail. All measures were performed in a custom isometric testing device that included a step-wise adjustable bar and a force plate for measuring ground reaction forces. The RFD during predetermined time zone bands (0-30, 0-50, 0-90, 0-100, 0-150, 0-200, and 0-250 milliseconds) was then calculated by dividing the force at the end of the band by the band's time interval. The peak RFD was then calculated with the use of 2, 5, 10, 20, 30, and 50 milliseconds sampling windows. The average RFD (avgRFD) was calculated by dividing the peak force (PF) by the time to achieve PF. All data were analyzed with the use of intraclass correlation alpha (ICCα) and the coefficient of variation (CV) and 90% confidence intervals. All predetermined RFD time bands were deemed reliable based on an ICCα >0.95 and a CV <4%. Conversely, the avgRFD failed to meet the reliability standards set for this study. Overall, the method used to assess the RFD during an isometric midthigh clean pull impacts the reliability of the measure and predetermined RFD time bands should be used to quantify the RFD.

  12. Climate Literacy and Energy Awareness Network (CLEAN) - Interactive Webinars for Teacher Professional Development

    Science.gov (United States)

    Grogan, M.; Ledley, T. S.; Buhr, S. M.

    2012-12-01

    Climate change will have far reaching impacts that the citizens of tomorrow will need to be prepared to address. In order for the citizens of tomorrow to be prepared, there is a clear need to support teachers in improving their understanding of the climate system and give them the resources to help their students develop that understanding. CLEAN (http://cleanet.org) is a National Science Digital Library (http://www.nsdl.org) project that is stewarding a collection of resources for teaching climate and energy science in grades 6-16. The collection contains classroom activities, lab demonstrations, visualizations, simulations, videos, and more. We have implemented a series of nine interactive webinars (iWebinars), each of which focuses on an aspect of the Essential Principles of Climate Science, pairs a scientist and a teacher to convey the science and how to teach that science using the vetted resources in the CLEAN collection, and gives the participants the opportunity to ask questions and discuss with the presenters and each other how they would use the resources in their classrooms and what else they would need to effectively teach the topic under discussion. The iWebinars were recorded and posted to the CLEAN portal (http://cleanet.org/clean/community/webinars/index.html) so that the participants and others can view them in the future. In this presentation, we will describe the scope and structure of the iWebinars; how the scientist's and teacher's presentations were coordinated to most effectively help the participants learn both the science and how to best convey it to their students; and how we involved the teachers in discussions to deepen their engagement and learning.

  13. Catalyzing Gender Equality-Focused Clean Energy Development in West Africa

    Energy Technology Data Exchange (ETDEWEB)

    2016-06-01

    The Economic Community of West African States (ECOWAS) Regional Center for Renewable Energy and Energy Efficiency (ECREEE) partnered with the Clean Energy Solutions Center (Solutions Center), the African Development Bank and other institutions to develop a Situation Analysis of Energy and Gender Issues in ECOWAS Member States. Through a systematic approach to assess interlinked gender and energy issues in the region, the report puts forth a number of key findings. This brochure highlights ECREEE's partnership with the Solutions Center and key findings from the report.

  14. Cleaning chemical and mechanical of heat exchangers in french nuclear plants; Limpieza mecanica y quimica de intercambiadores de calor en centrales nucleares francesas

    Energy Technology Data Exchange (ETDEWEB)

    Ruiz, J. t.; Guerra, P.; Carreres, C.

    2013-03-01

    This project was carried out under the frame of the approval of LAINSA as a supplier of EDF in France. The inspection performed on systems called the moisture separator reheaters (GSS) of CPO series reactor of EDF nuclear power plants has shown evidence of significant clogging due to deposits of magnetite inside the tubes of tube bundle. The pressure drop between inlet and outlet of the heating was close to maximum design criterion. This effect could result in equipment damage and loss of plant productivity. The aim of the work was the design, development, approval and implementation of a procedure for un blocking the tubes of the GSS respecting the integrity of materials and ensuring the harmlessness of cleaning procedures. The procedure used was to completely remove magnetite deposits in order to recover a passage diameter and a surface finish equivalent to the origin, thus avoiding the replacement of the GSS and obtaining a considerable reduction of costs. The achieve these objectives we have developed a procedure that is basically a mechanical pre-cleaning of all tubes of the GSS in order to unblock tem, followed by a chemical cleaning where magnetite is dissolved and crawled out of the tube bundle. The main results were: -Corrosion less than 10 microns. 100-110 Kg of magnetite removed by heat exchanger. -Final pressure drop similar to that of new equipment. -Waste water: 70 m{sup 3} per exchanger, which were managed by an authorized waste management company. This procedure has been applied successfully in 14 GSS type heat exchangers in Fessenheim and Bugey nuclear power plants in France between 2009 and 2011. This project demonstrates that the long experience of LAINSA in the Spanish nuclear industry along with the knowledge and experience in chemical cleaning of SOLARCA, have served to successfully work demanding and mature markets such as the French nuclear market, solving the problem of deposits of magnetite with an effective and safe method for the treated

  15. Engineering development of advance physical fine coal cleaning for premium fuel applications

    Energy Technology Data Exchange (ETDEWEB)

    Jha, M.C.; Smit, F.J.; Shields, G.L. [AMAX R& D Center/ENTECH Global Inc., Golden, CO (United States)

    1995-11-01

    The objective of this project is to develop the engineering design base for prototype fine coal cleaning plants based on Advanced Column Flotation and Selective Agglomeration processes for premium fuel and near-term applications. Removal of toxic trace elements is also being investigated. The scope of the project includes laboratory research and bench-scale testing of each process on six coals followed by design, construction, and operation of a 2 tons/hour process development unit (PDU). Three coals will be cleaned in tonnage quantity and provided to DOE and its contractors for combustion evaluation. Amax R&D (now a subsidiary of Cyprus Amax Mineral Company) is the prime contractor. Entech Global is managing the project and performing most of the research and development work as an on-site subcontractor. Other participants in the project are Cyprus Amax Coal Company, Arcanum, Bechtel, TIC, University of Kentucky and Virginia Tech. Drs. Keller of Syracuse and Dooher of Adelphi University are consultants.

  16. Going Clean - The Economics of China's Low-carbon Development

    Energy Technology Data Exchange (ETDEWEB)

    Hallding, Karl; Thai, Helen; Han, Guoyi; Olsson, Marie; Kartha, Sivan (Stockholm Environment Inst. (Sweden)); Eklund, Klas (SEB, Stockholm (Sweden)); SU Ming (Peking Univ. (China)); Cao Jing (Tsinghua Univ. (China)); Luderer (Potsdam Inst. for Climate Impact (Germany))

    2009-11-15

    -scale abatement. Carbon pricing mechanisms can also assist clean technology objectives, as anticipation of higher carbon prices sets an incentive to develop low-carbon technology and products, and can thus steer investments in this direction. In addition, we propose a new international finance mechanism - the Inter-country Joint Mitigation Plan - as a broader and more efficient way of financing technology transfers. There needs to be a substantial, stable and predictable source of international finance, accompanied by market reform and regulatory mechanisms that can recognise, support and deepen domestic mitigation and adaptation efforts. International assistance will fuel and accelerate China's shift to a knowledge-based economy. China faces a monumental challenge and a historic opportunity. The transition to a low-carbon society will require large investments but also bring about substantial benefits, not only to China but to the entire world

  17. Research document no. 21 bis. How could developing countries participate in climate change prevention: the clean development mechanism and beyond; Cahier de recherche no. 21. Les pays en developpement et la prevention du risque climatique: quelles perspectives pour le mecanisme de developpement propre?

    Energy Technology Data Exchange (ETDEWEB)

    Cavard, D.; Cornut, P.; Menanteau, Ph

    2000-10-01

    An agreement on CDM rules is important both for industrialized and developing countries. As a flexibility mechanism, it will allow industrialized countries to benefit from low cost emission reductions but the CDM, as a main goal, should also stimulate a more sustainable economic development in DCs. The CDM is the sole instrument, with GEF, proposed for DCs participation into climate change prevention. This situation satisfies a majority of DCs, but CDM may not offer sufficient perspectives for some countries with rapid industrialization given the huge economic stakes linked to the creation of a carbon credits market between Annex I countries. The operationality of the CDM is not yet established and important questions, as environmental additionality, are still unresolved. Here we first examine the rules in order to validate project additionality and their possible consequences on the effectiveness and the scope of the mechanism. The different reactions of major DCs groups on the structure of the mechanism will then be analysed. This will lead us to examine the possibilities to enlarge participation of DCs in climate change prevention according to the apparent wish of semi-industrialized countries. (author)

  18. 油罐清洗技术的发展现状%Development Status of Oil Tank Cleaning Technology

    Institute of Scientific and Technical Information of China (English)

    赵琳; 刘国荣; 姚凤灵; 王海涛

    2015-01-01

    原油是一种由多种烃类组成的复杂混合物,在油罐中进行长时间的储存后,由于重力、压力、温度的综合影响,原油中的杂质和重油性组分会慢慢沉积,最后积累在罐底,变成黑色、黏稠的胶状沉积物,即油罐底泥。底泥的不断增多会对原油的油品质量及储罐的有效容积产生很大影响,因此,必须对油罐进行定期检修和清洗除垢。目前,原油储罐的清洗技术主要包括人工清洗技术、化学清洗技术和机械清洗技术,还可以使用油罐清洗机器人对油罐进行清洗。我国原油储罐清洗技术正从原来的人工清洗技术向机械自动化清洗方向发展。介绍了几种油罐清洗方法,以及油罐清洗后残余油泥的处理方法。%The crude oil is a complex mixture composed of a variety of hydrocarbons. After prolonged storage in the tank, ow⁃ing to the comprehensive influence of gravity, pressure, temperature, impurities in crude oil and heavy oil group branch deposit slowly and finally accumulated at the bottom of the tank, into the black, sticky, colloidal sediments, namely oil tank sludge. The increasing sediment will have a great influence on the quality of crude oil and the effective volume of the storage tank, Therefore, it is necessary to regular maintenance and cleaning the tank. At present, the oil tank cleaning technology mainly includes the man⁃ual cleaning techniques, chemical cleaning technology and mechanical cleaning technology, and tank cleaning robot can also be used to clean the tank. Cleaning technology of oil storage tanks in China is from the original manual cleaning technology to the de⁃velopment of mechanical automation. This paper introduces several methods of tank cleaning, and processing method of residual sludge after tank cleaning.

  19. Case Studies of Rural Development and Clean Agriculture in Lao PDR

    Directory of Open Access Journals (Sweden)

    Sachika Hirokawa

    2013-07-01

    Full Text Available The study examines the kind of actors and resources that empower small-scale farmers to promote sustainable agriculture. It also analyzes the reasons given by farmers who changed their farming methods. In 2004, the Department of Agriculture launched a project for the Promoting Organic Farming and Marketing in Lao PDR (PROFIL. PROFIL tried to develop market opportunities for Lao’s organic products and supported the local organic farmers. I conducted field researches at Nonte village in Vientiane Capital twice in 2008. The researches indicated that “Clean Agriculture” is one of the new challenges for farmers. Thus, this research focuses on the observation of how local organic farmers adapt to a new method and cope with problems. Information as knowledge from community groups and external actors such as local institutions and experts might help villagers to have choices in terms of farming methods, which gave them positive choices in terms of health and an agricultural environment. Since the government has the recognition of comparative advantages of clean agriculture, farmers may have the opportunity to gain a large market of organic farm products if they can develop distribution channels. This study encourages the positive contributions of challenges of sustainable agriculture in Lao PDR.

  20. Clean Production and Ecological Industry: A Key to Eco-city Development

    Institute of Scientific and Technical Information of China (English)

    Paulussen Juergen; Wang Rusong

    2005-01-01

    Eco-city development is a healthy process towards sustainable development, within the carrying capacity of local ecosystem through changing production mode, consumption behavior and decision instrument based on ecological economics and system engineering. The key to its planning is an ecological integration to make trade-offbetween economic wealth and environmental health, between material and spiritual civilization, between natural and human eco-cybemetics. Integration, demonstration, citizens'participation and scientists' and technician's catalyzing are the key instruments for the implementation of the ecocity plan. "Clean production" and "ecological industry" are key elements in comprehensive development towards an eco-city. Beyond the technical and management questions, how to interlink production, consumption and reduction at the local and regional level, the spatial and urban dimension should be considered in order to perform an integrative urban eco-space.

  1. Heart of the Hearth: Making the Popular Clean, Not the Clean Popular - Technology Research, Development, and Tools for Clean Biomass Cookstoves

    Energy Technology Data Exchange (ETDEWEB)

    Gist, Ryan [BioLite, Inc., Brooklyn, NY (United States)

    2016-12-28

    This technical report summarizes the work completed by BioLite in fulfilment of the US DOE EERE award. The work plan focused on three key objectives: developing an optimized combustion system that demonstrates high combustion efficiency and low PM2.5 and CO emissions, integrate the system into popular stove phenotypes – side-fed rocket stove architecture like the BioLite HomeStove, and the Patsari chimney stove in Mexico such that they maintain their important phenotypical characteristics, independently evaluate quantitative fuel and emissions performance of the integrated ‘Turbo-Patsari’ in Mexican households. The project activities were organized into six major tasks: A. Develop, fabricate, and test proof-of-concept prototypes B. Develop field prototypes, assess user feedback and field performance C. Define revised stove design for pre-production model, Identify manufacturing requirements and estimated cost to build, Conduct reliability, emissions, and performance testing of pre-production Turbo-Patsari D. Build pre-production Turbo-Patsari stove combustion cores E. Conduct pre-production field trials F. Summarize field trial results and evaluate Turbo-Patsari for potential volume production. A two-pronged approach was adopted for the above tasks. The first involved building a modular test platform that allowed parametric variation of multiple stove design parameters that directly affect its performance – heat output, thermal efficiency, and emissions. The second part of the approach comprised of building a surrogate Patsari based on GIRA’s specifications that could then be modified or retrofitted for optimum performance based on the learnings from the modular test platform. The following sections of the report will describe the findings of tests on these platform, the subsequent development, design, and installation of the Turbo-Patsari, and finally the in-home field trial.

  2. Development of Trash Rack Cleaning Machine%拦污栅行走清污机研制

    Institute of Scientific and Technical Information of China (English)

    赵杰; 倪雪

    2012-01-01

    The trash rack cleaning machine with reliable work, flexible operation, convenient maintenance and wide application was developed. Action process of artificial pulling tine harrow is imitated to clean up the surface dirt of trash rack. Cleaning machine is equipped with running gear and can walk in the intended orbit, a machine can complete the clean-up of the porous trash rack.%研制了一种工作可靠、运行灵活、维护方便、适用广泛的拦污栅清污机。模仿人工提拉齿耙动作过程,清理拦污栅表面污物。清污机装有行走机构,可在预定轨道上行走,实现一机完成多孔拦污栅清污。

  3. Engineering development of advanced physical fine coal cleaning technologies: Froth flotation

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    A study conducted by Pittsburgh Energy Technology Center of sulfur emissions from about 1,300 United States coal-fired utility boilers indicated that half of the emissions were the result of burning coals having greater than 1.2 pounds of SO[sub 2] per million BTU. This was mainly attributed to the high pyritic sulfur content of the boiler fuel. A significant reduction in SO[sub 2] emissions could be accomplished by removing the pyrite from the coals by advanced physical fine coal cleaning. An engineering development project was prepared to build upon the basic research effort conducted under a solicitation for research into Fine Coal Surface Control. The engineering development project is intended to use general plant design knowledge and conceptualize a plant to utilize advanced froth flotation technology to process coal and produce a product having maximum practical pyritic sulfur reduction consistent with maximum practical BTU recovery.

  4. Quantum mechanics a modern development

    CERN Document Server

    Ballentine, Leslie E

    2015-01-01

    Although there are many textbooks that deal with the formal apparatus of quantum mechanics (QM) and its application to standard problems, none take into account the developments in the foundations of the subject which have taken place in the last few decades. There are specialized treatises on various aspects of the foundations of QM, but none that integrate those topics with the standard material. This book aims to remove that unfortunate dichotomy, which has divorced the practical aspects of the subject from the interpretation and broader implications of the theory. In this edition a new chapter on quantum information is added. As the topic is still in a state of rapid development, a comprehensive treatment is not feasible. The emphasis is on the fundamental principles and some key applications, including quantum cryptography, teleportation of states, and quantum computing. The impact of quantum information theory on the foundations of quantum mechanics is discussed. In addition, there are minor revisions ...

  5. 拱顶储油罐的机械清洗%Mechanical cleaning of dome-roof tank

    Institute of Scientific and Technical Information of China (English)

    宋龙进; 顾德哲; 孙成德

    2012-01-01

    This paper discusses the application of mechanical cleaning technology and its necessity in dome-roof oil tank. In consideration of the differences existed in mechanical cleaning technology for dome-roof tank and floating-roof tank, the installation method of jet should be different. For the dome-roof tank, the jet shall be installed on the top of the tank, and installation of it includes two types, one is made with the existing hole on the tank-top, and another is made with tapping on the tank-top, and if the jet installation location and jet quantity cannot satisfy the requirements of the cleaning operation, the jet can be installed on the tank wall near manholes. In the paper, the technical preparation procedure before tapping including the manufacture method of fixing support of jet, prefabrication of tapping adapter and technical key points of bonding with tank roof, installation of tapping machine, and safety measures of tapping operation, and other tapping operation technology is given, and the cautions in mechanical cleaning operation are provided.%阐述了机械清洗技术在拱顶储油罐中的应用现状,基于拱顶罐与浮顶罐机械清洗技术的差异,分析了两者在喷嘴安装方式上的区别.拱顶罐清洗喷嘴安装在罐顶部,包括利用现有的罐顶管口和在罐顶重新开孔两种形式;当罐顶安装的喷嘴位置或数量达不到清洗作业要求时,亦可在罐壁人孔部位安装喷嘴.此外,介绍了罐顶开孔前的技术准备、储罐清洗喷嘴固定支座的制作方法、罐顶开孔短接管的预制及其与罐顶板的粘接技术要领、开孔机的安装和开孔作业安全措施等拱顶罐罐顶开孔作业技术,总结了拱顶罐机械清洗作业程序及清洗施工中的安全注意事项.

  6. Development of an emergency air-cleaning system for liquid-metal reactors

    Energy Technology Data Exchange (ETDEWEB)

    Owen, R.K.

    1980-11-01

    A novel air cleaning concept has been developed for potential use in venting future commercial liquid metal fast breeder reactor containment buildings in the unlikely event of postulated core disruptive accidents. The passive concept consists of a submerged gravel bed to collect the bulk of particulate contaminates carried by the vented gas. A fibrous scrubber could be combined with the submerged gravel scrubber to enhance collection efficiencies for the smaller sized particles. The submerged gravel scrubber is unique in that water flow through the packed bed is induced by the gas flow, eliminating the need for an active liquid pump. In addition, design gas velocities through the packed bed are 10 to 20 times higher than for a conventional sand bed filter.

  7. Development of an air cleaning system for dissolving high explosives from nuclear warheads

    Energy Technology Data Exchange (ETDEWEB)

    Bergman, W.; Wilson, K.; Staggs, K.; Wapman, D. [Lawrence Livermore National Lab., CA (United States)

    1997-08-01

    The Department of Energy (DOE) has a major effort underway in dismantling nuclear weapons. In support of this effort we have been developing a workstation for removing the high explosive (HE) from nuclear warheads using hot sprays of dimethyl sulfoxide (DMSO) solvent to dissolve the HE. An important component of the workstation is the air cleaning system that is used to contain DMSO aerosols and vapor and radioactive aerosols. The air cleaning system consists of a condenser to liquefy the hot DMSO vapor, a demister pad to remove most of the DMSO aerosols, a high efficiency particulate air (HEPA) filter to remove the remaining aerosols, an activated carbon filter to remove the DMSO vapor, and a final HEPA filter to meet the redundancy requirement for HEPA filters in radioactive applications. The demister pad is a 4{double_prime} thick mat of glass and steel fibers and was selected after conducting screening tests on promising candidates. We also conducted screening tests on various activated carbons and found that all had a similar performance. The carbon breakthrough curves were fitted to a modified Wheeler`s equation and gave excellent predictions for the effect of different flow rates. After all of the components were assembled, we ran a series of performance tests on the components and system to determine the particle capture efficiency as a function of size for dioctyl sebacate (DOS) and DMSO aerosols using laser particle counters and filter samples. The pad had an efficiency greater than 990% for 0.1 {mu}m DMSO particles. Test results on the prototype carbon filter showed only 70% efficiency, instead of the 99.9% in small scale laboratory tests. Thus further work will be required to develop the prototype carbon filter. 7 refs., 18 figs., 10 tabs.

  8. 膜污染机理与化学清洗方式研究%Research of the membrane fouling mechanism & chemical cleaning methods

    Institute of Scientific and Technical Information of China (English)

    康永; 胡肖勇

    2012-01-01

    膜污染是膜技术应用中面临的关键问题,其影响膜运行的稳定性,决定膜清洗周期以及膜的更换频率。因此,要使膜获得长期稳定的运行效果,必须研究其膜污染的机理与清洗方法。确定了膜污染机理,对于了解膜通量下降原因、预测膜通量、控制和消除膜污染具有指导意义。膜面形成污染层,会影响通量以及脱盐率,因此需定期进行膜清洗以恢复性能,但也有不可恢复的损失,造成运行成本提高。故文中总结了膜清洗的方式与污染机理以望对膜行业的发展有所促进作用。%Membrane fouling was a crucial issue in the application of the membrane technology.It was influenced the stability of the membrane operation,and determined the period of the membrane cleaning and the replace frequency of the membrane.Therefore,it was researched the membrane fouling mechanism and the membrane cleaning method so that operates smoothly,safely.It was possessed directive significance to the understand the decrease reason of the membrane flux、 predict membrane flux、controlled and eliminated membrane fouling by determined the membrane fouling mechanism.Formation of the pollution layer on the membrane face influenced the flux and salt rejection,so it was needed the regularly membrane cleaning in order to reinstate membrane performance.But there was some unrecoverable loss,and caused the increase of the running cost.It was summarized the membrane fouling mechanism and membrane cleaning method in order to promote the development of the membrane industry.

  9. Patterning mechanisms controlling digit development

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Vertebrate digits are essential structures for movement,feeding and communication.Specialized regions of the developing limb bud including the zone of polarizing activity(ZPA),the apical ectodermal ridge(AER),and the non-ridge ectoderm regulate the patterning of digits.Although a series of signaling molecules have been characterized as patterning signals from the organizing centers,the delicate cellular and molecular mechanisms that interpret how these patterning signals control the detailed digit anatomy remain unclear.Recent studies from model organisms and human hand malformations provide new insights into the mechanisms regulating this process.Here,we review the current understanding of the genetic networks governing digit morphogenesis.

  10. Physical Mechanisms and Feedback Control of Beam Halo-Chaos for Accelerator-driven Radioactive-clean Nuclear Power Systems

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    High-current proton beams have attractive features for possible breakthrough applications, especially for accelerator-driven radioactive-clean nuclear power systems (ADS), which make nuclear energy systems safer, cleaner, cheaper, and therefore more practical. However, beam halo-chaos in ADS has become one of the key technical issues because it can cause excessive radio-activation from the accelerators and significantly limits the industrial applications of the new accelerators.Some general engineering methods for chaos control have been developed, but they generally

  11. Sustainable energy for cashew production chain using innovative clean technology project developments

    Energy Technology Data Exchange (ETDEWEB)

    Pannir Selvam, P.V.; Nandenha, Julio; Santiago, Brunno Henrique de Souza; Silva, Rosalia Tatiane da [Universidade Federal do Rio Grande do Norte (GPEC/DEQ/UFRN), Lagoa Nova, RN (Brazil). Dept. de Engenharia Quimica. Grupo de Pesquisa em Engenharia de Custos e Processos], e-mail: pannirbr@gmail.com

    2006-07-01

    The main objective is to develop a new process synthesis based on the residual biomass waste for the energy production applied to the fruit processing plant with co-production of hot, cold thermal energy using biogas from the wood biomass and animal wastes. After carried out the bibliographical research about the current state of art technology, an engineering project had been developed with the use of the software Super Pro Designer V 4.9. Some simulations of processes of the fast pyrolysis, gasification, bio digestion, generation of energy have been realized including the system integration of energy production as innovation of the present work. Three cases study have been developed: first, the current process of conventional energy using combustion, another one using combined pyrolysis and gasification, and the last one with bio digestion for combined power, heat and chilling. The results about the project investment and the cost analysis, economic viability and cash balance were obtained using software Orc 2004. Several techno-economic parameters of the selected cases study involving process innovation were obtained and compared, where a better energy and materials utilization were observed in relation to conventional process. This project which is still in development phase, involves small scale energy integrated system design. The energy and the process integration cashew fruit production chain, based on the clean technology process design, has enable significant improvement in terms of economic and environmental using optimal system configurations with viability and sustainability. (author)

  12. Cleaning effectiveness of three mechanical methods cleaning exogenous tinting on heat-cured base resin%3种机械清洁方法对树脂外源性着色的清洁效果

    Institute of Scientific and Technical Information of China (English)

    庞敏; 吴凤鸣; 王来杰; 陆雯; 章雯

    2012-01-01

    目的 评估3种机械清洁方法即电动牙刷配合清洁膏、牙膏或自来水刷洗对热固化型基托树脂外源性着色的清洁效果.方法 制作60块热固化基托树脂试件,随机分成4组,用电子比色仪测色后,分别浸泡入蒸馏水(对照组)、绿茶、漱口水、黄连水中4周.再将后3组实验组各分成3组,分别以自来水、牙膏或清洁膏作为刷洗液,用电动牙刷刷洗10 min后再次测色.计算各组试件刷洗后与浸泡前的色差.方差分析法比较3种机械清洁方法对试件外源性着色的清除能力.结果 刷洗方法及浸泡液种类均影响试件的颜色改变,各实验组试件表面颜色的改变与对照组相比均有显著性差异(P< 0.05).绿茶组中清洁膏与牙膏之间、牙膏与空刷之间无统计学意义(P>0.05),清洁膏与空刷之间有统计学差异(p<0.05).漱口水与黄连水中3种清洁方法两两间均有显著性差异(P<0.05),且以清洁膏组试件表面色差最小,牙膏次之.结论 3种机械清洁方法清除热固化型基托树脂表面着色的效果有差异,以清洁膏效果最好.%Objective To evaluate the wear resistant of base resin to three mechanical denture cleaning methods, namely cleaning with electric toothbrush as well as cleansing paste, toothpaste, or tap water. Methods 60 samples of heat-cured base resin were made and randomly divided into 4 groups. Color was measured with a colorimeter and then the samples were immersed into distilled water (control group) , green tea, dentilave and rhizoma coptidis for 4 weeks. 3 experimental groups were divided into 3 subgroups, and cleaned with cleansing paste, toothpaste, or tap water separately. The samples were cleaned with electric toothbrush for 10 min, and then the colors were measured again. AE of each group was calculated and compared. The wear resistant of base resin to three mechanical denture cleaning methods was evaluated by ANOVA. Results Cleaning methods and

  13. Mechanical Cleaning Technology Application in Inner Floating Roof Tank%机械清洗在内浮顶油罐中的应用

    Institute of Scientific and Technical Information of China (English)

    冯杰; 王延昌; 李志国; 程曦; 邱冬

    2013-01-01

    Mechanical cleaning technique of storage tank is relatively advanced one in recent years .It is suitable for floating roof ,vault ,horizontal ,spherical tank cleaning ,with advantages of safety ,environmental protection ,and high efficiency . The mechanical cleaning of the con-struction process and key parameters control are introduced , the risk and control measures in cleaning process are listed .Combined with the cleaning of the floating roof tank of a loading sta-tion south 1# ,the inner floating roof tank mechanical cleaning of the deficiencies and improve-ment measures are analyzed .%  储油罐的机械清洗技术是目前比较先进的储罐清洗技术,适用于浮顶、拱顶、卧式、球形罐的清洗,具有安全、环保、高效等优点。介绍了机械清洗的施工过程及关键参数控制,列举出清洗过程中存在的风险及控制措施,结合某装车站南区1#内浮顶罐的清洗情况,分析了内浮顶罐机械清洗存在的不足及改进措施。

  14. New progresses in safe, clean and efficient development technologies for high-sulfur gas reservoirs

    Directory of Open Access Journals (Sweden)

    Liming Huang

    2015-10-01

    Full Text Available In China, there are a lot of high-sulfur gas reservoirs with total proved reserves of over 1 trillion m3, most of which were discovered in the Sichuan Basin. Most high-sulfur gas reservoirs in China, distributed in marine carbonate zones, are characterized by great buried depths, complex geologic conditions, high temperatures, high pressures, high H2S and CO2 content, presenting various challenges in gas field development engineering and production safety. Since the development of Sinian high-sulfur gas reservoirs in the Weiyuan area of the Sichuan Basin started in the 1960s, Wolonghe, Zhongba and other medium to small-scale gas reservoirs with medium to low sulfur content have been developed. Ever since 2009, successful production of Longgang and Puguang in the Sichuan Basin, together with some other high-sulfur gas reservoirs highlighted the breakthroughs in development technologies for high-sulfur gas reservoirs in China. This paper reviews the progress made in gas reservoir engineering, drilling and completion engineering, gas production, pipeline transportation, corrosion control, natural gas purification, HSE and other aspects with consideration of specific requirements related to safe, clean and high-efficient development of high-sulfur gas reservoirs since the “12th Five-Year Plan” period. Finally, considering the challenges in the development of high-sulfur gas reservoirs in China, we summarized the trend in future technological development with the following goals of reducing risks, minimizing environmental damages, and enhancing the efficiency of high-sulfur gas reservoir development.

  15. Active biopolymers in green non-conventional media: a sustainable tool for developing clean chemical processes.

    Science.gov (United States)

    Lozano, Pedro; Bernal, Juana M; Nieto, Susana; Gomez, Celia; Garcia-Verdugo, Eduardo; Luis, Santiago V

    2015-12-21

    The greenness of chemical processes turns around two main axes: the selectivity of catalytic transformations, and the separation of pure products. The transfer of the exquisite catalytic efficiency shown by enzymes in nature to chemical processes is an important challenge. By using appropriate reaction systems, the combination of biopolymers with supercritical carbon dioxide (scCO2) and ionic liquids (ILs) resulted in synergetic and outstanding platforms for developing (multi)catalytic green chemical processes, even under flow conditions. The stabilization of biocatalysts, together with the design of straightforward approaches for separation of pure products including the full recovery and reuse of enzymes/ILs systems, are essential elements for developing clean chemical processes. By understanding structure-function relationships of biopolymers in ILs, as well as for ILs themselves (e.g. sponge-like ionic liquids, SLILs; supported ionic liquids-like phases, SILLPs, etc.), several integral green chemical processes of (bio)catalytic transformation and pure product separation are pointed out (e.g. the biocatalytic production of biodiesel in SLILs, etc.). Other developments based on DNA/ILs systems, as pathfinder studies for further technological applications in the near future, are also considered.

  16. Assessment of hospital daily cleaning practices using ATP bioluminescence in a developing country

    Directory of Open Access Journals (Sweden)

    Alejandra A. Zambrano

    2014-12-01

    Full Text Available Visual assessment of surfaces may not be enough to document the level of cleanliness in the hospital setting. It is necessary to introduce quantitative methods to document the results of this practice.Objective:To evaluate the efficacy of hospital terminal cleaning procedures, using an adenosine triphosphate (ATP bioluminescence method in a teaching hospital.Method:During 2008 we conducted an evaluation using ATP bioluminescence LIGHTNING MVP™ (Arquimed of external and internal housekeeping service. After conducting an initial evaluation we implemented education of cleaning practices and finally we did a post intervention evaluation. Using chi-square method we compared prior versus after cleaning, quality of cleaning performed by external versus internal personnel, single versus double terminal cleaning procedures and prior versus after intervention. A finding of three RLU or less was considered a clean surface.Results:We performed 198 evaluations in 33 patient units and nine OR. Internal personnel accomplished 25.37% of clean surfaces before and 80% after the education intervention (p = 0.01. In contrast, external personnel obtained 68.8% before and 73.33% after intervention (p = 0.3.Conclusions:This study suggests that visual assessment is not enough to ensure quality of the process and it is necessary to document the level of cleanliness by quantitative methods.

  17. DEVELOPING AN OPTIMIZED PROCESS STRATEGY FOR ACID CLEANING OF THE SAVANNAH RIVERSITE HLW TANKS

    Energy Technology Data Exchange (ETDEWEB)

    Ketusky, E

    2006-12-04

    At the Savannah River Site (SRS), there remains approximately 35 million gallons of High Level Waste (HLW) that was mostly created from Purex and SRS H-Area Modified (HM) nuclear fuel cycles. The waste is contained in approximately forty-nine tanks fabricated from commercially available carbon steel. In order to minimize general corrosion, the waste is maintained as very-alkaline solution. The very-alkaline chemistry has caused hydrated metal oxides to precipitate and form a sludge heel. Over the years, the sludge waste has aged, with some forming a hardened crust. To aid in the removal of the sludge heels from select tanks for closure the use of oxalic acid to dissolve the sludge is being investigated. Developing an optimized process strategy based on laboratory analyses would be prohibitively costly. This research, therefore, demonstrates that a chemical equilibrium based software program can be used to develop an optimized process strategy for oxalic acid cleaning of the HLW tanks based on estimating resultant chemistries, minimizing resultant oxalates sent to the evaporator, and minimizing resultant solids sent to the Defense Waste Processing Facility (DWPF).

  18. Further Developments in the Communication Link and Error Analysis (CLEAN) Simulator

    Science.gov (United States)

    Ebel, William J.; Ingels, Frank M.

    1995-01-01

    During the period 1 July 1993 - 30 June 1994, significant developments to the Communication Link and Error ANalysis (CLEAN) simulator were completed. Many of these were reported in the Semi-Annual report dated December 1993 which has been included in this report in Appendix A. Since December 1993, a number of additional modules have been added involving Unit-Memory Convolutional codes (UMC). These are: (1) Unit-Memory Convolutional Encoder module (UMCEncd); (2) Hard decision Unit-Memory Convolutional Decoder using the Viterbi decoding algorithm (VitUMC); and (3) a number of utility modules designed to investigate the performance of LTMC's such as LTMC column distance function (UMCdc), UMC free distance function (UMCdfree), UMC row distance function (UMCdr), and UMC Transformation (UMCTrans). The study of UMC's was driven, in part, by the desire to investigate high-rate convolutional codes which are better suited as inner codes for a concatenated coding scheme. A number of high-rate LTMC's were found which are good candidates for inner codes. Besides the further developments of the simulation, a study was performed to construct a table of the best known Unit-Memory Convolutional codes. Finally, a preliminary study of the usefulness of the Periodic Convolutional Interleaver (PCI) was completed and documented in a Technical note dated March 17, 1994. This technical note has also been included in this final report.

  19. Institute a modest carbon tax to reduce carbon emissions, finance clean energy technology development, cut taxes, and reduce the deficit

    Energy Technology Data Exchange (ETDEWEB)

    Muro, Mark; Rothwell, Jonathan

    2012-11-15

    The nation should institute a modest carbon tax in order to help clean up the economy and stabilize the nation’s finances. Specifically, Congress and the president should implement a $20 per ton, steadily increasing carbon excise fee that would discourage carbon dioxide emissions while shifting taxation onto pollution, financing energy efficiency (EE) and clean technology development, and providing opportunities to cut taxes or reduce the deficit. The net effect of these policies would be to curb harmful carbon emissions, improve the nation’s balance sheet, and stimulate job-creation and economic renewal.

  20. Development of electro-optic systems for self cleaning concentrated solar reflectors

    Science.gov (United States)

    Stark, Jeremy W.

    The current demand for energy usage in the world is increasing at a rapid pace; in China alone, the electricity usage has increased by 12% per year from 2006-2010, where more than 75% of electrical power is produced by coal burning facilities. Numerous studies have shown the effects of carbon dioxide emissions on global climate change, and even showing the permanence of high carbon dioxide levels after emissions cease. Current trends away from carbon emitting power facilities are pushing solar energy into a position for many new solar power plants to be constructed. Terrestrial solar energy at AM1.5 is generally given at 1kW/m2, which is a vast free source of energy that can be be harvested to meet the global demand for electricity. Aside from some areas receiving intermittent levels of solar insolation, one of the largest hindrances to large scale solar power production is obscuration of sunlight on solar collectors caused by dust deposition. In areas with the highest average solar insolation, dust deposition is a major problem for maintaining a constant maximum power output. The southern Negev desert in Israel receives on average 17g/m2 per month in dust deposition on solar installations, which in turn causes losses of a third of the total power output of the installation. In these areas, water is a scarce commodity, which can only be used to clean solar installations at a prohibitive cost. To resolve this problem, a cost effective solution would be the application of electrodynamic screens (EDS), which can be implemented by embedding a set of parallel electrodes into the sun facing surface of solar collectors, including concentrating mirrors or photovoltaic (PV) modules, and applying a low frequency pulsed voltage to these electrodes. Three major contributions made in the course of this research in advancing (EDS) for self-cleaning solar mirrors are: (1) development of non-contact specular reflectometer for solar mirrors that allows measurement of reflectance

  1. Cogeneration and Carbon bonds: clean development; Cogeneracion y bonos de carbono: desarrollo limpio

    Energy Technology Data Exchange (ETDEWEB)

    Navarro Perez, Nidia [Facultad de Contaduria y Administracion, Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)

    2004-06-15

    The growing preoccupation for the environment in our country and its interest to ratify the Kyoto Protocol with respect to the contamination of the atmosphere, offers great opportunities for the cogeneration so that it fortifies the scientific and technological research and gives a good international image about the sustainable development and care of the environment, so that companies that invest in clean technology will be able to assign a monetary value to their environmental patrimony, this through the so called Green Bonds or Carbon Bonds, this opens a new dimension to finance projects by means of these bonds that can be negotiated at an international level; by means of the Clean of Energy Production the investment can be stimulated and revenues for projects that contribute to the sustainable development of the country and the power efficiency. At the moment the country has at least 13 projects in different analysis stages to enter the carbon bond market, which are presented as co-generation projects of energy, in addition to the formation of the Mexican Committee for Projects of Reduction and Capture of Gas Discharges of Greenhouse Effect. [Spanish] La creciente preocupacion por el medio ambiente en nuestro pais y su interes por ratificar el Protocolo de Kyoto en lo referente a la contaminacion de la atmosfera, ofrece grandes oportunidades para la cogeneracion de manera que fortalezca la investigacion cientifica y tecnologica y dar una buena imagen internacional en torno a temas de desarrollo sustentable y cuidado del medio ambiente, de manera que empresas que invierten en tecnologia limpia podran asignar un valor monetario a su patrimonio ambiental, esto a traves de los llamados Bonos Verdes o Bonos de Carbono, esto abre una dimension nueva para financiar proyectos por medio de estos bonos que pueden negociarse a nivel internacional; por medio de la Produccion Limpia de energia se puede estimular inversion y ganancias para proyectos que contribuyan al

  2. Within- and between-session reliability of power, force, and rate of force development during the power clean.

    Science.gov (United States)

    Comfort, Paul

    2013-05-01

    Although there has been extensive research regarding the power clean, its application to sports performance, and use as a measure of assessing changes in performance, no research has determined the reliability assessing the kinetics of the power clean across testing session. The aim of this study was to determine the within- and between-session reliability of kinetic variables during the power clean. Twelve professional rugby league players (age 24.5 ± 2.1 years; height 182.86 ± 6.97 cm; body mass 92.85 ± 5.67 kg; 1 repetition maximum [1RM] power clean 102.50 ± 10.35 kg) performed 3 sets of 3 repetitions of power cleans at 70% of their 1RM, while standing on a force plate, to determine within-session reliability and repeated on 3 separate occasions to determine reliability between sessions. Intraclass correlation coefficients revealed a high reliability within- (r ≥ 0.969) and between-sessions (r ≥ 0.988). Repeated-measures analysis of variance showed no significant difference (p > 0.05) in peak vertical ground reaction force, rate of force development, and peak power between sessions, with small standard error of the measurements and smallest detectable differences for each kinetic variable (3.13 and 8.68 N; 84.39 and 233.93 N·s; 24.54 and 68.01 W, respectively). Therefore, to identify a meaningful change in performance, the strength and conditioning coach should look for a change in peak force ≥8.68 N, rate of force development ≥24.54 N·s, and a change in peak power ≥68.01 W to signify an adaptive response to training, which is greater than the variance between sessions, in trained athletes proficient at performing the power clean.

  3. Application of Mechanical Cleaning Method of Crude Oil Storage Tank%机械方法清理原油储罐的应用

    Institute of Scientific and Technical Information of China (English)

    吴笛; 李文辉; 马小兵

    2014-01-01

    通过对人工及机械方法清理原油储罐的特点进行对比分析,提出了机械清理方法的原理及方法。通过试验研究发现,机械清理方法在安全性、环境保护、节约能源及成本控制等方面具有突出的优势。%By way of artificial and mechanical characteristics of crude oil storage tank cleaning comparative analysis of mechanical cleaning methods proposed principles and methods,the study found that mechanical cleaning methods,in safety,environmental protection,energy conserva-tion,cost control,has outstanding advantages.

  4. A Medium-Scale 50 MWfuel Biomass Gasification Based Bio-SNG Plant: A Developed Gas Cleaning Process

    Directory of Open Access Journals (Sweden)

    Ramiar Sadegh-Vaziri

    2015-06-01

    Full Text Available Natural gas is becoming increasingly important as a primary energy source. A suitable replacement for fossil natural gas is bio-SNG, produced by biomass gasification, followed by methanation. A major challenge is efficient gas cleaning processes for removal of sulfur compounds and other impurities. The present study focuses on development of a gas cleaning step for a product gas produced in a 50 MWfuel gasification system. The developed gas cleaning washing process is basically a modification of the Rectisol process. Several different process configurations were evaluated using Aspen plus, including PC-SAFT for the thermodynamic modeling. The developed configuration takes advantage of only one methanol wash column, compared to two columns in a conventional Rectisol process. Results from modeling show the ability of the proposed configuration to remove impurities to a sufficiently low concentrations - almost zero concentration for H2S, CS2, HCl, NH3 and HCN, and approximately 0.01 mg/Nm3 for COS. These levels are acceptable for further upgrading of the gas in a methanation process. Simultaneously, up to 92% of the original CO2 is preserved in the final cleaned syngas stream. No process integration or economic consideration was performed within the scope of the present study, but will be investigated in future projects to improve the overall process.

  5. Thermomechanical model to assess stresses developed during elevated-temperature cleaning of coated optics.

    Science.gov (United States)

    Liddell, H P H; Lambropoulos, J C; Jacobs, S D

    2014-09-10

    A thermomechanical model is developed to estimate the stress response of an oxide coating to elevated-temperature chemical cleaning. Using a hafnia-silica multilayer dielectric pulse compressor grating as a case study, we demonstrate that substrate thickness can strongly affect the thermal stress response of the thin-film coating. As a result, coatings on large, thick substrates may be susceptible to modes of stress-induced failure (crazing or delamination) not seen in small parts. We compare the stress response of meter-scale optics to the behavior of small-scale test or "witness" samples, which are expected to be representative of their full-size counterparts. The effects of materials selection, solution temperature, and heating/cooling rates are explored. Extending the model to other situations, thermal stress results are surveyed for various combinations of commonly used materials. Seven oxide coatings (hafnia, silica, tantala, niobia, alumina, and multilayers of hafnia-silica and alumina-silica) and three glass substrates (BK7, borosilicate float glass, and fused silica) are examined to highlight some interesting results.

  6. Development of Hydrocracking Catalyst to Produce High Quality Clean Middle Distillates

    Institute of Scientific and Technical Information of China (English)

    Zhang Xuejun; Zhang Zhihua

    2004-01-01

    A novel hydrocracking Ni-W binary catalyst was tentatively designed and prepared by means of impregnation on mixed supports of modified Y zeolite and amorphous aluminosilicate. The structure and properties of catalyst were extensively characterized by XRD, NH3-TPD, IR and XRF techniques. The performance of catalyst was evaluated by a 100-ml hydrogenation laboratory test unit with two single-stage fixed-bed reactors connected in series. The characterization results showed that the catalyst has a developed and concentrated mesopores distribution, suitable acid sites and acid strength distribution, and uniform and high dispersion of metal sites. Under a high conversion rate of 73.8% with the >350℃ feedstock, a 98. 1m% of C5+yield and 83.5% of middle distillates selectivity were obtained. The yield of middle distillates boiling between 140℃and 370℃ was 68.70m% and its quality could meet the WWFC category Ⅲ specification. It means that this catalyst could be used to produce more high quality clean middle distillates derived from heavy oil hydrocracking. The potential aromatic content of heavy naphtha from 65℃ to 140℃ was 37.5m%. The BMCI value of >370℃ tail oil was 6.6. The heavy naphtha and tail oil are premium feedstocks for catalytic reforming and steam cracker units.

  7. Engineering development of advanced physical fine coal cleaning for premium fuel applications. Quarterly report, April 1--June 30, 1997

    Energy Technology Data Exchange (ETDEWEB)

    Moro, N.; Shields, G.L.; Smit, F.J.; Jha, M.C.

    1997-12-31

    The primary goal of this project is the engineering development of two advanced physical fine coal cleaning processes, column flotation and selective agglomeration, for premium fuel applications. The project scope includes laboratory research and bench-scale testing on six coals to optimize these processes, followed by the design, construction, and operation of a 2 t/hr process development unit (PDU). Accomplishments during the quarter are described on the following tasks and subtasks: Development of near-term applications (engineering development and dewatering studies); Engineering development of selective agglomeration (bench-scale testing and process scale-up); PDU and advanced column flotation module (coal selection and procurement and advanced flotation topical report); Selective agglomeration module (module operation and clean coal production with Hiawatha, Taggart, and Indiana 7 coals); Disposition of the PDU; and Project final report. Plans for next quarter are discussed and agglomeration results of the three tested coals are presented.

  8. Enabling clean access into Subglacial Lake Whillans: development and use of the WISSARD hot water drill system.

    Science.gov (United States)

    Rack, Frank R

    2016-01-28

    Clean hot water drill systems (CHWDSs) are used with clean access protocols for the exploration of subglacial lakes and other subglacial aquatic environments (e.g. ice-shelf cavities) in Antarctica. A CHWDS developed for the Whillans Ice Stream Subglacial Access Research Drilling (WISSARD) project by the Science Management Office at the University of Nebraska-Lincoln (UNL-SMO), USA, was specifically designed for use in West Antarctica, where the US Antarctic Program's South Pole Traverse could assist with logistical support. The initial goal was to provide clean access holes through ice up to 1000 m thick following environmental stewardship guidelines; however, the existing design allows this CHWDS to be used for ice thicknesses up to 2000 m following modifications to accommodate longer hose lengths. In January 2013, the WISSARD CHWDS successfully provided for the first time a clean access borehole through 800 m of ice into Subglacial Lake Whillans beneath the West Antarctic Ice Sheet for the deployment of scientific instruments and sampling tools. The development and initial use of the WISSARD CHWDS required the project team to address a number of constraints while providing contingencies to meet the defined project scope, schedule and budget.

  9. Clean data

    CERN Document Server

    Squire, Megan

    2015-01-01

    If you are a data scientist of any level, beginners included, and interested in cleaning up your data, this is the book for you! Experience with Python or PHP is assumed, but no previous knowledge of data cleaning is needed.

  10. Development, testing, and demonstration of an optimal fine coal cleaning circuit

    Energy Technology Data Exchange (ETDEWEB)

    Mishra, M.; Placha, M.; Bethell, P. [and others

    1995-11-01

    The overall objective of this project is to improve the efficiency of fine coal cleaning. The project will be completed in two phases: bench-scale testing and demonstration of four advanced flotation cells and; in-plant proof-of-concept (POC) pilot plant testing of two flotation cells individually and in two-stage combinations. The goal is to ascertain if a two-stage circuit can result in reduced capital and operating costs while achieving improved separation efficiency. The plant selected for this project, Cyprus Emerald Coal Preparation plant, cleans 1200 tph of raw coal. The plant produces approximately 4 million tonnes of clean coal per year at an average as received energy content of 30.2 MJ/Kg (13,000 Btu/lb).

  11. Epigenetic mechanisms and gastrointestinal development

    Science.gov (United States)

    This review considers the hypothesis that nutrition during infancy affects developmental epigenetics in the gut, causing metabolic imprinting of gastrointestinal (GI) structure and function. Fundamentals of epigenetic gene regulation are reviewed, with an emphasis on the epigenetic mechanism of DNA ...

  12. Sorption Mechanisms for Mercury Capture in Warm Post-Gasification Gas Clean-Up Systems

    Energy Technology Data Exchange (ETDEWEB)

    Jost Wendt; Sung Jun Lee; Paul Blowers

    2008-09-30

    The research was directed towards a sorbent injection/particle removal process where a sorbent may be injected upstream of the warm gas cleanup system to scavenge Hg and other trace metals, and removed (with the metals) within the warm gas cleanup process. The specific objectives of this project were to understand and quantify, through fundamentally based models, mechanisms of interaction between mercury vapor compounds and novel paper waste derived (kaolinite + calcium based) sorbents (currently marketed under the trade name MinPlus). The portion of the research described first is the experimental portion, in which sorbent effectiveness to scavenge metallic mercury (Hg{sup 0}) at high temperatures (>600 C) is determined as a function of temperature, sorbent loading, gas composition, and other important parameters. Levels of Hg{sup 0} investigated were in an industrially relevant range ({approx} 25 {micro}g/m{sup 3}) although contaminants were contained in synthetic gases and not in actual flue gases. A later section of this report contains the results of the complementary computational results.

  13. Clean Energy Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    For the past several years, the IEA and others have been calling for a clean energy revolution to achieve global energy security, economic growth and climate change goals. This report analyses for the first time progress in global clean energy technology deployment against the pathways that are needed to achieve these goals. It provides an overview of technology deployment status, key policy developments and public spending on RDD&D of clean energy technologies.

  14. Developing an Online Database of National and Sub-National Clean Energy Policies

    Energy Technology Data Exchange (ETDEWEB)

    Haynes, R.; Cross, S.; Heinemann, A.; Booth, S.

    2014-06-01

    The Database of State Incentives for Renewables and Efficiency (DSIRE) was established in 1995 to provide summaries of energy efficiency and renewable energy policies offered by the federal and state governments. This primer provides an overview of the major policy, research, and technical topics to be considered when creating a similar clean energy policy database and website.

  15. Perspectives of ukrainian mechanical engineering development

    OpenAIRE

    Dyrda, Evgenia; Schepetkova, Anastasiya; Galushko, Olena

    2013-01-01

    Theses are devoted to problems and perspectives of Ukrainian mechanical engineering development. Role of mechanical engineering in national economy is described. Problems of mechanical engineering, such as losing the cometetive advantages, production decreasing, debts growing, ineffective assets structure, are investigated. Influence of European integration process on mechanical engineering enterprises is discussed.

  16. Molecular Mechanism of Somite Development

    Directory of Open Access Journals (Sweden)

    Gulfidan Coskun

    2013-06-01

    Full Text Available From third week of gestation, notochord and the neural folds begin to gather at the center of the embryo to form the paraxial mesoderm. Paraxial mesoderm separates into blocks of cells called somitomers at the lateral sides of the neural tube of the head region. At the beginning of the third week somitomeres take ring shapes and form blocks of somites from occipital region to caudal region. Although somites are transient structures, they are extremely important in organizing the segmental pattern of vertebrate embryos. Somites give rise to the cells that form the vertebrae and ribs, the dermis of the dorsal skin, the skeletal muscles of the back, and the skeletal muscles of the body wall and limbs. Somitogenesis are formed by a genetic mechanism that is regulated by cyclical expression of genes in the Notch, Wnt and fibroblast growth factor signaling pathways. The prevailing model of the mechanism governing somitogenesis is the “clock and wave front”. Somitogenesis has components of periodicity, separation, epithelialization and axial specification. According to this model, the clock causes cells to undergo repeated oscillations, with a particular phase of each oscillation defining the competency of cells in the presomitic mesoderm to form a somite. Any disruption in this mechanism can be cause of severe segmentation defects of the vertebrae and congenital anomalies. In this review, we discuss the molecular mechanisms underlying the somitogenesis which is an important part of morphogenesis. [Archives Medical Review Journal 2013; 22(3.000: 362-376

  17. 机械式自清洁播种头设计与试验%Design and test on self-cleaning seeding head for mechanism suction

    Institute of Scientific and Technical Information of China (English)

    姜凯; 张骞; 王秀

    2013-01-01

    In China, the cultivation area of the facilities agriculture has reached 3.5 million hectares, and the industrialized farming will continue to develop during the period of the 12th“Five-Year Plan”. The demand for intelligent equipment of facilities agriculture has become increasingly urgent with the rapid development of the ageing of population and the lacking of labor in rural areas of China. As for the air-suction seeders, there were many researches on positive pressure methods for dredging and ejecting seed head, but few reports about the research on the technology to prevent the seeding head blockage. The needle-type tray seeder consisted of seeding head, seeding pole, conveying cylinders, seeds plate, pneumatic vibrator, guide pipe, conveyor belt and so on. The seeds plate and pneumatic vibrator provide exciting force to boil the seeds to make the seeds being absorbed easily. Operations of absorbing the boiling seeds from the seeds plate and transporting the seeds to the guide pipe were implemented by the seeding head, seeding pole, conveying cylinders and guide pipe. In order to solve the problem that the suction nozzle of needle-type tray seeder was easily blocked to affect the quality of sowing, a kind of mechanical self-cleaning seeding head was designed based on air suction-blowing seeding principle. The structure of mechanical self-cleaning seeding head consists of a nozzle tip, fixed base, cleaning piston, thimble and reset spring and other parts. The suction nozzle was dredged by cleaning piston, and the seeding operation was performed by the thimble. The mechanical models that seeds were drawn at negative pressure and ejected mechanically at positive pressure were developed. The analysis results showed that the suction airflow rate was directly proportional to the inside diameter of the suction nozzle and inversely proportional to the height of suction position. The pressure of ejecting seed depended on the compression force of the reset spring

  18. Development of a Standardized Procedure for Cleaning Glass Apparatus in Analytical Laboratories

    Directory of Open Access Journals (Sweden)

    HUDSON C. POLONINI

    2011-06-01

    Full Text Available ABSTRACT Adequate cleaning of analytical glassware is an essential procedure that determines the reliability of assays and tests carried out in laboratories, keeping the glassware free of interference from residues left by previous tests. In the present paper, standard cleaning procedures are proposed for laboratory glassware, which were tested on cyanocobalamin as a marker contaminant. A spectrophotometric method was used for quantitative determination of both residual marker and cleaning product. Beakers, volumetric flasks and volumetric pipettes were successfully cleaned with a 2% detergent solution, with several rinses in water. Vials were cleaned adequately in an ultrasonic bath. These procedures utilize non-toxic and cheap reagents, factors of paramount importance for their application in routine laboratory analysis. Keywords: Validation Studies. Detergents. Laboratory Techniques and Procedures. Glassware Cleaning. RESUMO Desenvolvimento de procedimento padronizado para a lavagem de vidraria em laboratórios analíticos A lavagem da vidraria analítica é um procedimento essencial e determinante na confiabilidade dos resultados de testes e ensaios, a despeito da interferência dos resíduos de análises anteriores. Neste trabalho, foram propostos procedimentos de limpeza de vidrarias utilizando cianocobalamina como um marcador da eficiência de limpeza. Foi utilizado método espectrofotométrico para determinação dos resíduos do marcador e também do agente de limpeza. Béqueres, balões volumétricos e pipetas volumétricas foram comprovadamente limpos com detergente a 2% e múltiplos enxágues. Vials e seringas foram apropriadamente limpos utilizando-se banho ultrassônico. Esses procedimentos de limpeza fazem uso de reagentes baratos e não tóxicos, parâmetros de suma importância para sua aplicação em rotina laboratorial de análises físico-químicas. Palavras-chave: Estudos de Validação. Detergentes. Técnicas e

  19. Creativity mechanism in technology development

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, M.R.

    1986-01-01

    By training and experience in engineering I am able to converse in a few technical areas such as control systems and microprocessors. Today the subject is people and my only claim to credibility is as a person in the technical work force, enlightened by a certain amount of enthusiasm, observation and study. The subject is as important as it is interesting, and is literally the key to our collective future. I want to explore the mechanism of human innovation - the creative process. I will discuss the complementary roles of man and machines to provide a perspective of where man can function best. The mechanism we call the human mind is then briefly described. But the main thrust is a summary of the identifiable steps in the human creative process. Finally, I conclude with a statement on the evolution of ideas and offer suggestions on providing a supportive environment.

  20. Effects of mechanical cleaning by manual brushing and abrasive blasting on lime render coatings on Architectural Heritage

    Directory of Open Access Journals (Sweden)

    Iglesias-Campos, M. A.

    2014-12-01

    Full Text Available This research studies the effects of mechanical cleaning by brushing and by abrasive blasting on the lime render coating of a façade. After analysing the properties of the material, the deposits to be removed and their possible influence on the treatment, different cleaning tests were made by manual brushing and by blasting with three varieties of abrasives at 45° and 75° angles, keeping the other parameters constant. Taking the restorer’s perspective as a starting point, and in order to fulfil the practical requirements of an intervention, tests were evaluated with macro-photography, USB digital microscope and stereomicroscope with 3D visualization and measurement. From the results can be concluded that abrasives with low friability and greater grain size than the space between mortar aggregates blasted at a 75° angle reduce the differential erosion compared to other abrasives; although manual brushing has less impact on the surface.En este trabajo se estudian los efectos de las limpiezas mecánicas con cepillado y con proyección de abrasivos sobre un revestimiento exterior de cal. Tras documentar las propiedades del material, de los depósitos superficiales y de su posible influencia en el tratamiento, se realizaron diferentes catas de limpieza con cepillado manual y con proyección de tres abrasivos con ángulos de 45° y 75° manteniendo constantes el resto de parámetros. Partiendo de la visión del conservador-restaurador y de un carácter práctico según las necesidades reales de intervención, los ensayos se evaluaron con macrofotografía, microscopio digital USB y microscopio estereoscópico con visualización y medición en 3D. De los resultados se determina que los abrasivos de baja friabilidad y granulometría mayor que el espacio entre los áridos del mortero proyectados con un ángulo de 75° reducen la erosión diferencial en comparación a otros abrasivos, aunque el cepillado manual altera menos la superficie.

  1. Progress in the development of deposition prevention and cleaning techniques of in-vessel optics in ITER

    Science.gov (United States)

    Mukhin, E.; Vukolov, K.; Semenov, V.; Tolstyakov, S.; Kochergin, M.; Kurskiev, G.; Podushnikova, K.; Razdobarin, A.; Gorodetsky, A.; Zalavutdinov, R.; Bukhovets, V.; Zakharov, A.; Bulovich, S.; Veiko, V.; Shakshno, E.

    2009-08-01

    The lifetime of front optical components unprotected from reactor grade plasmas may be very short due to intensive contamination with carbon and beryllium-based materials eroded by the plasma from beryllium walls and carbon tiles. Deposits result in a significant reduction and spectral alterations of optical transmission. In addition, even rather thin and transparent deposits can dramatically change the shape of reflectance spectra, especially for mirrors with rather low reflectivity, such as W or Mo. The distortion of data obtained with various optical diagnostics may affect the safe operation of ITER. Therefore, the development of optics-cleaning and deposition-mitigating techniques is a key factor in the construction and operation of optical diagnostics in ITER. The problem is of particular concern for optical elements positioned in the divertor region. The latest achievements in protection of in-vessel optics are presented using the example of deposition prevention/cleaning techniques for in-machine components of the Thomson scattering system in the divertor. Careful consideration of well-known and novel protection approaches shows that neither of them alone provides guaranteed survivability of the first in-vessel optics in the divertor. Only a set of complementary prevention/cleaning techniques, which include special materials for mirrors and inhibition additives for plasma, is able to manage the challenging task. The essential issue, which needs to be addressed in the immediate future, is an extensive development of techniques tested under experimental conditions (exposure time and contamination fluxes) similar to those expected in ITER.

  2. Clean Development Mechanism and Least Developed Countries: Changing the Rules for Greater Participation

    DEFF Research Database (Denmark)

    De Lopez, Thanakvaro Thyl; Tin, Ponlok; Iyadomi, Keisuke

    2009-01-01

    . This article discusses opportunities for modifying the CDM rules to provide more opportunities for LDCs. Regulatory reforms, technical assistance programs, and direct registration and certification of CDM activities in LDCs by the UNFCCC Secretariat may help foster CDM activities in LDCs . As negotiations...

  3. Paraffin dispersant application for cleaning subsea flow lines in the deep water Gulf of Mexico cottonwood development

    Energy Technology Data Exchange (ETDEWEB)

    Jennings, David; White, Jake; Pogoson, Oje [Baker Hughes Inc., Houston, TX (United States); Barros, Dalmo; Ramachandran, Kartik; Bonin, George; Waltrich, Paulo; Shecaira, Farid [PETROBRAS America, Houston, TX (United States); Ziglio, Claudio [Petroleo Brasileiro S.A. (CENPES/PETROBRAS), Rio de Janeiro, RJ (Brazil). Centro de Pesquisa e Desenvolvimento

    2012-07-01

    This paper discusses a paraffin dispersant (in seawater) application to clean paraffin deposition from a severely restricted 17.4-mile dual subsea flow line system in the Gulf of Mexico Cottonwood development. In principle, dispersant treatments are simple processes requiring effective dispersant packages and agitation to break-up and disperse deposition. Dispersants have been used onshore for treating wax deposition for decades. Implementation of a treatment in a long deep water production system, however, poses numerous challenges. The Cottonwood application was one of the first ever deep water dispersant applications. The application was designed in four separate phases: pre-treatment displacement for hydrate protection, dispersant treatment for paraffin deposition removal, pigging sequence for final flow line cleaning, and post-treatment displacement for hydrate protection. In addition, considerable job planning was performed to ensure the application was executed in a safe and environmentally responsible manner. Two dynamically positioned marine vessels were used for pumping fluids and capturing returns. The application was extremely successful in restoring the deep water flow lines back to near pre-production state. Final pigging operations confirmed the flow lines were cleaned of all restrictions. Significant paraffin deposition was removed in the application. Approximately 900 bbls of paraffin sludge was recovered from the 4000 bbl internal volume flow line loop. Furthermore, the application was completed with zero discharge of fluids. The application provided significant value for the Cottonwood development. It allowed production from wells to be brought on-line at a higher capacity, thereby generating increased revenue. It also allowed resumption of routine pigging operations. As such, the Cottonwood dispersant application illustrates that with proper planning and execution, paraffin dispersant treatments can be highly effective solutions for cleaning

  4. Research on regional capability constructive models of cleat development mechanism

    Institute of Scientific and Technical Information of China (English)

    Chen Leishan; Liu Qingqiang; Geng Jie; Lu Genfa

    2009-01-01

    Global climate change has been identified as the ftrst of the top ten environmental problems in the world,As climate change will have serious effects on the social and economic development and everyday living of people in the world,many of the countries and governments are taking untiring efforts to combat climate change.As one of the important mechanisms of reducing greenhouse gas (GHG) emissions in the Kyoto Protocol,Clean DevelopmentMechanism (CDM) has not only provided chance.for developed countries to ftdfill greenhouse emission reduction obligations,but also provided an opportunity for developing countries to combat climate change under the sustainabledevelopment frame.The dual objectives of developed countries' GHG emissions' reduction obligation achievement and developing countries'sustainable development will be achieved under the CDM.As a country with responsibility,China has been positively developing CDM projects and promoting energy saving and emissions reduction during the three years after the Kyoto Protocol came into force,and CDM projects development has always been in the front tank in the world However,as the vast clime within China,notable differences occur in different regions.In order to promote the CDM development in China,it is necessary to have regional CDM capability construction in accor dance with the practicality in different regions.Based on the Slat Analysis of developed CDM projects and current CDM development status in China,problems in the CDM development of China,including the inefficiency in sinall and medium-sized CDM Projects development,over centralization of CDM development scope and especially the differentiated provincial CDM projects developing capability are pointed out in the paper.What's more,reasons forthe problems are analyzed from the leading factors,including policy orient,information asymmetry and weak CDMcapability.In order to promote CDM projects development in China,a new CDM capability construction model is put

  5. The mechanism of territorial branding development

    Directory of Open Access Journals (Sweden)

    Yu.L. Shatava

    2012-12-01

    Full Text Available The article is devoted to the questions of territorial branding; the mechanism of territory brand development and advancement in obedience to strategy of regions development is offered.

  6. 超洁净制造的研究与发展%Research and Development of Ultra-clean Manufacturing

    Institute of Scientific and Technical Information of China (English)

    白清顺; 郭永博; 陈家轩; 卢礼华; 张庆春; 张飞虎; 赵航; 袁晓东; 梁迎春

    2016-01-01

    Manufacturing discipline is a subject that develops and changes continuously with the evolution of science and the progress of technology. The concept of ultra-clean manufacturing (UCM) is initially proposed. The intension and extension of the ultra-clean manufacturing is defined according to the demand for cleanliness in the field of laser fusion, electronics manufacturing, aeronautics, astronautics and medical device, etc. In the related fields mentioned, the evolution of the surface contamination can bring an important impact on the performance and function of the devices. On the basis of comprehensive analysis of the application field in ultra-clean manufacturing, the challenges of fundamental theory and key technology for the ultra-clean manufacturing are proposed and the essence of the surface cleanliness is analyzed. In view of the present situation of the contamination adsorption and desorption on the surface of the parts, some cases of the ultra-clean manufacturing in the related field is dissected. Finally, the scientific issues and technical approach of the ultra-clean manufacturing is proposed considering its development in the future. The aim is to present a new development idea for manufacturing science and engineering, broad and elevate its areas of application. The development of major science project and key technology area can also benefit from the research of ultra-clean manufacturing.%制造学科是随着科学的演进和技术的进步不断地发展和变化的一个学科。结合激光聚变、电子制造、航空航天以及医疗器械等领域对洁净的需求,首次提出了超洁净制造的新概念,并对超洁净制造的内涵进行了界定。在上述相关领域中,表面污染物的演化和演变将对器件的性能和功能产生重要的影响。采用制造领域的新方法和新手段获得超洁净表面,并实现其工作时超洁净状态的维持是制约上述领域发展的瓶颈问题。在综合分析

  7. Broadening the Appeal of Marginal Abatement Cost Curves: Capturing Both Carbon Mitigation and Development Benefits of Clean Energy Technologies; Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Cowlin, S.; Cochran, J.; Cox, S.; Davison, C.; van der Gaast, Y.

    2012-08-01

    Low emission development strategies (LEDS) articulate policies and implementation plans that enable countries to advance sustainable, climate-resilient development and private sector growth while significantly reducing the greenhouse gas (GHG) emissions traditionally associated with economic growth. In creating a LEDS, policy makers often have access to information on abatement potential and costs for clean energy technologies, but there is a scarcity of economy-wide approaches for evaluating and presenting information on other dimensions of importance to development, such as human welfare, poverty alleviation, and energy security. To address this shortcoming, this paper proposes a new tool for communicating development benefits to policy makers as part of a LEDS process. The purpose of this tool is two-fold: 1. Communicate development benefits associated with each clean energy-related intervention; 2. Facilitate decision-making on which combination of interventions best contributes to development goals. To pilot this tool, the authors created a visual using data on developmental impacts identified through the Technology Needs Assessment (TNA) project in Montenegro. The visual will then be revised to reflect new data established through the TNA that provides information on cost, GHG mitigation, as well as the range and magnitude of developmental impacts.

  8. Developments in mechanical heart valve prosthesis

    Indian Academy of Sciences (India)

    Kalyani Nair; C V Muraleedharan; G S Bhuvaneshwar

    2003-06-01

    Artificial heart valves are engineered devices used for replacing diseased or damaged natural valves of the heart. Most commonly used for replacement are mechanical heart valves and biological valves. This paper briefly outlines the evolution, designs employed, materials being used,. and important factors that affect the performance of mechanical heart valves. The clinical performance of mechanical heart valves is also addressed. Efforts made in India in the development of mechanical heart valves are also discussed.

  9. Energy from biomass gasification as energetic option for clean development; Energia da gaseificacao de biomassa como opcao energetica de desenvolvimento limpo

    Energy Technology Data Exchange (ETDEWEB)

    Galvao, Luiz Claudio Ribeiro; Grimoni, Jose Aquiles Baeso; Kinto, Oscar Tadashi; Morales Udaeta, Miguel Edgar [Sao Paulo Univ., SP (Brazil). Escola Politecnica. Grupo de Energia]. E-mail: udaeta@pea.usp.br

    2002-07-01

    This paper presents the study for energy production using biomass in the energetic planning and as a clean development mechanism. The paper defines the Medio Paranapanema region, considered as one of the less developed in the state of Sao Paulo, as application referential, in accordance with the Resource Integrated Planning methodology. The work also presents the state-of-art of the gasification technologies existent in the world. The region analysis and characterization, the biomass resource and the gasification technologies has been used as the methodology by the paper, focusing the Complete Costs Analysis during a planning period of 10 years. A theoretical potential of 4 x 10{sup 3} GW h result has been obtained, by using as fuel the biomass residues of the sugar cane, corn, cotton and manioc. From the obtained results, a preferential planning for the region has been established showing the the feasibility and the sustainability of that technology for electric power production.

  10. Suggestions About Improvement of the Mechanical Cleaning System for Storage Tanks%关于改进完善储罐机械清洗系统的建议

    Institute of Scientific and Technical Information of China (English)

    高易; 王树国

    2012-01-01

    简要介绍了传统储罐在机械清洗过程中所遇到的难点问题,通过多年来对储罐机械清洗过程中的经验总结,针对传统机械清洗方式中部分环节存在的不足之处提出改进方法,使其能够更好的解决储罐在实际清洗过程中的问题,满足储罐机械清洗作业的需要.%Some difficulties during traditional mechanical cleaning for storage tanks were introduced. Based on mechanical cleaning experiences for storage tanks, aiming at disadvantages of traditional mechanical cleaning method,some improved methods were put forward, which can better solve actual problems during cleaning process to meet the need of storagetank mechanical cleaning.

  11. Development of longwalls with comprehensive mechanization

    Energy Technology Data Exchange (ETDEWEB)

    Oplaznik, G.

    1984-01-01

    The characteristics of the development of comprehensive mechanization in the period between 1969 and 1982 are analyzed. The extensive nature of the development is indicated. The most important principles for analyzing a longwall with comprehensive mechanization is the establishment of the possibility of increasing their effectiveness and to identify and use production reserves.

  12. Development of Formulations for a-SiC and Manganese CMP and Post-CMP Cleaning of Cobalt

    Science.gov (United States)

    Lagudu, Uma Rames Krishna

    We have investigated the chemical mechanical polishing (CMP) of amorphous SiC (a-SiC) and Mn and Post CMP cleaning of cobalt for various device applications. During the manufacture of copper interconnects using the damascene process the polishing of copper is followed by the polishing of the barrier material (Co, Mn, Ru and their alloys) and its post CMP cleaning. This is followed by the a-SiC hard mask CMP. Silicon carbide thin films, though of widespread use in microelectronic engineering, are difficult to process by CMP because of their hardness and chemical inertness. The earlier part of the SiC work discusses the development of slurries based on silica abrasives that resulted in high a-SiC removal rates (RRs). The ionic strength of the silica dispersion was found to play a significant role in enhancing material removal rate, while also providing very good post-polish surface-smoothness. For example, the addition of 50 mM potassium nitrate to a pH 8 aqueous slurry consisting of 10 wt % of silica abrasives and 1.47 M hydrogen peroxide increased the RR from about 150 nm/h to about 2100 nm/h. The role of ionic strength in obtaining such high RRs was investigated using surface zeta-potentials measurements and X-ray photoelectron spectroscopy (XPS). Evidently, hydrogen peroxide promoted the oxidation of Si and C to form weakly adhered species that were subsequently removed by the abrasive action of the silica particles. The effect of potassium nitrate in increasing material removal is attributed to the reduction in the electrostatic repulsion between the abrasive particles and the SiC surface because of screening of surface charges by the added electrolyte. We also show that transition metal compounds when used as additives to silica dispersions enhance a-SiC removal rates (RRs). Silica slurries containing potassium permanganate gave RRs as high as 2000 nm/h at pH 4. Addition of copper sulfate to this slurry further enhanced the RRs to ˜3500 nm/h at pH 6

  13. Study on clean development of coalbed methane in China%我国煤层气清洁发展研究

    Institute of Scientific and Technical Information of China (English)

    苏钰杰; 徐凯

    2012-01-01

    Coalbed methane, with rich reserves m China, is a quality new energy of strategic significance. Hence, utilization of the gas in a scientific manner can effectively address the energy crisis problem. However, use of the gas cannot be said to be optimistic in China at present since a variety of problems surface. From the perspective of clean development mechanism, this paper explores the valuable experiences of other countries in coalbed methane development, in an attempt to find a roadmap on which China can overcome the dilemma in coalbed methane development and that is suitable for its own situations. It is expected to look for an effective point where the clean development mechanism is in conjunction with the coalbed methane, and come up with the measures for China's coalbed methane to step onto a benign path of scaled production.%煤层气是一种具有重要战略意义的优质新能源,在我国储量丰富.科学地利用煤层气将能有效解决能源危机问题,但是我国煤层气的利用状况不容乐观,存在着一系列问题,本文从清洁发展机制的角度出发,探讨国外煤层气发展的有益经验,试图寻找能使我国煤层气发展走出困境并适合国情的发展路径,期待能够发现清洁发展机制和煤层气发展的有效契合点,以期为我国煤层气步入规模化良性发展轨道出谋划策.

  14. Cleaning Robot for Solar Panels in Solar Power Station

    Science.gov (United States)

    Hang, Lu-Bin; Shen, Cheng-Wei; Bian, Huai-Qiang; Wang, Yan

    2016-05-01

    The dust particles on solar panel surface have been a serious problem for the photovoltaic industry, a new monorail-tracked robot used for automatic cleaning of solar panel is presented in this paper. To meet the requirement of comprehensive and stable cleaning of PV array, the monorail-tracked pattern of robot is introduced based on the monorail structure technique. The running and striding mechanism are designed for mobility of robot on the solar panels. According to the carrying capacity and water circulation mechanism, a type of self-cleaning device with filtering system is developed. Combined with the computer software and communications technology, the control system is built in this robot, which can realize the functions of autonomous operation, positioning and monitoring. The application of this developed cleaning robot can actualize the Industrialization of automatic cleaning for PV components and have wide market prospect.

  15. Airing 'clean air' in Clean India Mission.

    Science.gov (United States)

    Banerjee, T; Kumar, M; Mall, R K; Singh, R S

    2016-12-30

    The submission explores the possibility of a policy revision for considering clean air quality in recently launched nationwide campaign, Clean India Mission (CIM). Despite of several efforts for improving availability of clean household energy and sanitation facilities, situation remain still depressing as almost half of global population lacks access to clean energy and proper sanitation. Globally, at least 2.5 billion people do not have access to basic sanitation facilities. There are also evidences of 7 million premature deaths by air pollution in year 2012. The situation is even more disastrous for India especially in rural areas. Although, India has reasonably progressed in developing sanitary facilities and disseminating clean fuel to its urban households, the situation in rural areas is still miserable and needs to be reviewed. Several policy interventions and campaigns were made to improve the scenario but outcomes were remarkably poor. Indian census revealed a mere 31% sanitation coverage (in 2011) compared to 22% in 2001 while 60% of population (700 million) still use solid biofuels and traditional cook stoves for household cooking. Further, last decade (2001-2011) witnessed the progress decelerating down with rural households without sanitation facilities increased by 8.3 million while minimum progress has been made in conversion of conventional to modern fuels. To revamp the sanitation coverage, an overambitious nationwide campaign CIM was initiated in 2014 and present submission explores the possibility of including 'clean air' considerations within it. The article draws evidence from literatures on scenarios of rural sanitation, energy practises, pollution induced mortality and climatic impacts of air pollution. This subsequently hypothesised with possible modification in available technologies, dissemination modes, financing and implementation for integration of CIM with 'clean air' so that access to both sanitation and clean household energy may be

  16. Clean Energy Infrastructure Educational Initiative

    Energy Technology Data Exchange (ETDEWEB)

    Hallinan, Kevin; Menart, James; Gilbert, Robert

    2012-08-31

    new research in the renewable and clean energy area. The educational outreach provided as a result of the grant included activities to introduce renewable and clean energy design projects into the Mechanical and Materials Engineering senior design class, the development of a geothermal energy demonstration unit, and the development of renewable energy learning modules for high school students. Finally, this grant supported curriculum development by Sinclair Community College for seven new courses and acquisition of necessary related instrumentation and laboratory equipment. These new courses, EGV 1201 Weatherization Training, EGV 1251 Introduction to Energy Management Principles, EGV 2301 Commercial and Industrial Assessment, EGV 2351 LEED Green Associate Exam Preparation, EGV 2251 Energy Control Strategies, EGV Solar Photovoltaic Design and Installation, and EGV Solar Thermal Systems, enable Sinclair to offer complete Energy Technology Certificate and an Energy Management Degree programs. To date, 151 students have completed or are currently registered in one of the seven courses developed through this grant. With the increasing interest in the Energy Management Degree program, Sinclair has begun the procedure to have the program approved by the Ohio Board of Regents.

  17. Clean Metal Casting

    Energy Technology Data Exchange (ETDEWEB)

    Makhlouf M. Makhlouf; Diran Apelian

    2002-02-05

    The objective of this project is to develop a technology for clean metal processing that is capable of consistently providing a metal cleanliness level that is fit for a given application. The program has five tasks: Development of melt cleanliness assessment technology, development of melt contamination avoidance technology, development of high temperature phase separation technology, establishment of a correlation between the level of melt cleanliness and as cast mechanical properties, and transfer of technology to the industrial sector. Within the context of the first task, WPI has developed a standardized Reduced Pressure Test that has been endorsed by AFS as a recommended practice. In addition, within the context of task1, WPI has developed a melt cleanliness sensor based on the principles of electromagnetic separation. An industrial partner is commercializing the sensor. Within the context of the second task, WPI has developed environmentally friendly fluxes that do not contain fluorine. Within the context of the third task, WPI modeled the process of rotary degassing and verified the model predictions with experimental data. This model may be used to optimize the performance of industrial rotary degassers. Within the context of the fourth task, WPI has correlated the level of melt cleanliness at various foundries, including a sand casting foundry, a permanent mold casting foundry, and a die casting foundry, to the casting process and the resultant mechanical properties. This is useful in tailoring the melt cleansing operations at foundries to the particular casting process and the desired properties of cast components.

  18. Clean Power Plan Toolbox

    Science.gov (United States)

    These are resources to help states as they develop state implementation plans under section 111(d) of the Clean Air Act to meet EPA's carbon pollution standards for existing power plants. Supplements www2.epa.gov/carbon-pollution-standards.

  19. Development of Thermoelectric and Permanent Magnet Nanoparticles for Clean Energy Applications

    Science.gov (United States)

    Nguyen, Phi-Khanh

    The global trend towards energy efficiency and environmental sustainability has generated a strong demand for clean energy technologies. Among the many energy solutions, the work in this dissertation contributes to two strategic goals: the reduction of fuel consumption in the transportation sector, and the increase of domestic wind power capacity. The key barriers to achieving these goals are materials challenges. Automobiles can be made more efficient by thermoelectric conversion of waste heat from the engine into electricity that can be used to power electrical components in the vehicle. Vehicles can forego petroleum fuel altogether by using electric or hybrid motors. Unfortunately, the conversion efficiency of current thermoelectric technology is too low to be considered economically feasible, and the permanent magnets used in electric vehicle motors and wind turbine generators require critical rare-earth elements that are economically unstable (often referred to as the "rare-earth crisis"). In order to combat these challenges, a "spark erosion" technique was utilized for producing nanoparticles that improve thermoelectric efficiency and contribute to the development of electromotors that do not require rare-earths. In Chapter 2 of this dissertation, I describe the utilization of spark erosion for producing high-quality thermoelectric nanoparticles at a remarkably high rate and with enhanced thermoelectric properties. The technique was employed to synthesize p-type bismuth-antimony telluride (BST) and n-type skutterudite nanoparticles, using a relatively small laboratory apparatus, with low energy consumption. The compacted BST nanocomposite samples made from these nanoparticles exhibit a well-defined, 20--50 nm size nanograin microstructure, and show an enhanced Figure of merit, ZT, of 1.36 at 360 K due to a reduction in lattice thermal conductivity. The skutterudite nanocomposites also show reduced thermal conductivity but still require enhancement in the

  20. Development of OTM Syngas Process and Testing of Syngas Derived Ultra-clean Fuels in Diesel Engines and Fuel Cells

    Energy Technology Data Exchange (ETDEWEB)

    E.T. Robinson; John Sirman; Prasad Apte; Xingun Gui; Tytus R. Bulicz; Dan Corgard; John Hemmings

    2005-05-01

    This final report summarizes work accomplished in the Program from January 1, 2001 through December 31, 2004. Most of the key technical objectives for this program were achieved. A breakthrough material system has lead to the development of an OTM (oxygen transport membrane) compact planar reactor design capable of producing either syngas or hydrogen. The planar reactor shows significant advantages in thermal efficiency and a step change reduction in costs compared to either autothermal reforming or steam methane reforming with CO{sub 2} recovery. Syngas derived ultra-clean transportation fuels were tested in the Nuvera fuel cell modular pressurized reactor and in International Truck and Engine single cylinder test engines. The studies compared emission and engine performance of conventional base fuels to various formulations of ultra-clean gasoline or diesel fuels. A proprietary BP oxygenate showed significant advantage in both applications for reducing emissions with minimal impact on performance. In addition, a study to evaluate new fuel formulations for an HCCI engine was completed.

  1. Black Carbon and Kerosene Lighting: An Opportunity for Rapid Action on Climate Change and Clean Energy for Development

    Energy Technology Data Exchange (ETDEWEB)

    Jacobson, Arne [Humboldt State Univ., MN (United States). Schatz Energy Research Center; Bond, Tami C. [Univ. of Illinois at Urbana-Champaign, IL (United States). Dept. of Civil and Environmental Engineering; Lam, Nicholoas L. [Univ. of California, Berkeley, CA (United States). Dept. of Environmental Health Sciences; Hultman, Nathan [The Brookings Institution, Washington, DC (United States)

    2013-04-15

    Replacing inefficient kerosene lighting with electric lighting or other clean alternatives can rapidly achieve development and energy access goals, save money and reduce climate warming. Many of the 250 million households that lack reliable access to electricity rely on inefficient and dangerous simple wick lamps and other kerosene-fueled light sources, using 4 to 25 billion liters of kerosene annually to meet basic lighting needs. Kerosene costs can be a significant household expense and subsidies are expensive. New information on kerosene lamp emissions reveals that their climate impacts are substantial. Eliminating current annual black carbon emissions would provide a climate benefit equivalent to 5 gigatons of carbon dioxide reductions over the next 20 years. Robust and low-cost technologies for supplanting simple wick and other kerosene-fueled lamps exist and are easily distributed and scalable. Improving household lighting offers a low-cost opportunity to improve development, cool the climate and reduce costs.

  2. International Assistance for Low-Emission Development Planning: Coordinated Low Emissions Assistance Network (CLEAN) Inventory of Activities and Tools--Preliminary Trends

    Energy Technology Data Exchange (ETDEWEB)

    Cox, S.; Benioff, R.

    2011-05-01

    The Coordinated Low Emissions Assistance Network (CLEAN) is a voluntary network of international practitioners supporting low-emission planning in developing countries. The network seeks to improve quality of support through sharing project information, tools, best practices and lessons, and by fostering harmonized assistance. CLEAN has developed an inventory to track and analyze international technical support and tools for low-carbon planning activities in developing countries. This paper presents a preliminary analysis of the inventory to help identify trends in assistance activities and tools available to support developing countries with low-emission planning.

  3. Assessment of Co-benefits of Clean Development Projects Based on the Project Design Documents of India’s Power’s Sector Currently under Registration and Validation

    Directory of Open Access Journals (Sweden)

    Ryo Eto

    2013-12-01

    Full Text Available Energy-related Clean Development Mechanism (CDM projects contribute to sustainable development through reducing air pollutants in addition to CO2 emissions. This paper evaluates the co-benefits of ten coal-fired power generation CDM projects which are currently in registration and validation with a power generation mix linear programming model in India’s power sector from 2006 to 2031. Two scenarios are developed to identify impacts of the CDM projects. As a result, the co-benefits are invoked by the CDM projects in India’s power sector. CO2 emissions decrease by 79 Mt CO2 and SOx and NOx emissions decrease by 0.8 Mt SOx and 0.6 Mt NOx from the baseline in 2031. Including benefits from the reduction of the air pollutants warrants sustainable development benefit and contributes to enhance the generated CER prices. Thus, we argue that addressing co-benefits encourages both host countries and investors to participate CDM projects.

  4. An evaluation of short-term exposures of brake mechanics to asbestos during automotive and truck brake cleaning and machining activities.

    Science.gov (United States)

    Richter, Richard O; Finley, Brent L; Paustenbach, Dennis J; Williams, Pamela R D; Sheehan, Patrick J

    2009-07-01

    Historically, the greatest contributions to airborne asbestos concentrations during brake repair work were likely due to specific, short-duration, dust-generating activities. In this paper, the available short-term asbestos air sampling data for mechanics collected during the cleaning and machining of vehicle brakes are evaluated to determine their impact on both short-term and daily exposures. The high degree of variability and lack of transparency for most of the short-term samples limit their use in reconstructing past asbestos exposures for brake mechanics. However, the data are useful in evaluating how reducing short-term, dust-generating activities reduced long-term exposures, especially for auto brake mechanics. Using the short-term dose data for grinding brake linings from these same studies, in combination with existing time-weighted average (TWA) data collected in decades after grinding was commonplace in rebuilding brake shoes, an average 8-h TWA of approximately 0.10 f/cc was estimated for auto brake mechanics that performed arc grinding of linings during automobile brake repair (in the 1960s or earlier). In the 1970s and early 1980s, a decline in machining activities led to a decrease in the 8-h TWA to approximately 0.063 f/cc. Improved cleaning methods in the late 1980s further reduced the 8-h TWA for most brake mechanics to about 0.0021 f/cc. It is noteworthy that when compared with the original OSHA excursion level, only 15 of the more than 300 short-term concentrations for brake mechanics measured during the 1970s and 1980s possibly exceeded the standard. Considering exposure duration, none of the short-term exposures were above the current OSHA excursion level.

  5. Growth and development: hereditary and mechanical modulations.

    Science.gov (United States)

    Mao, Jeremy J; Nah, Hyun-Duck

    2004-06-01

    Growth and development is the net result of environmental modulation of genetic inheritance. Mesenchymal cells differentiate into chondrogenic, osteogenic, and fibrogenic cells: the first 2 are chiefly responsible for endochondral ossification, and the last 2 for sutural growth. Cells are influenced by genes and environmental cues to migrate, proliferate, differentiate, and synthesize extracellular matrix in specific directions and magnitudes, ultimately resulting in macroscopic shapes such as the nose and the chin. Mechanical forces, the most studied environmental cues, readily modulate bone and cartilage growth. Recent experimental evidence demonstrates that cyclic forces evoke greater anabolic responses of not only craniofacial sutures, but also cranial base cartilage. Mechanical forces are transmitted as tissue-borne and cell-borne mechanical strain that in turn regulates gene expression, cell proliferation, differentiation, maturation, and matrix synthesis, the totality of which is growth and development. Thus, hereditary and mechanical modulations of growth and development share a common pathway via genes. Combined approaches using genetics, bioengineering, and quantitative biology are expected to bring new insight into growth and development, and might lead to innovative therapies for craniofacial skeletal dysplasia including malocclusion, dentofacial deformities, and craniofacial anomalies such as cleft palate and craniosynostosis, as well as disorders associated with the temporomandibular joint.

  6. Engineering Development of Advanced Physical Fine Coal Cleaning for Premium Fuel Applications: Task 9 - Selective agglomeration Module Testing and Evaluation.

    Energy Technology Data Exchange (ETDEWEB)

    Moro, N.` Jha, M.C.

    1997-09-29

    The primary goal of this project was the engineering development of two advanced physical fine coal cleaning processes, column flotation and selective agglomeration, for premium fuel applications. The project scope included laboratory research and bench-scale testing of both processes on six coals to optimize the processes, followed by the design, construction, and operation of a 2 t/hr process development unit (PDU). The project began in October, 1992, and is scheduled for completion by September 1997. This report summarizes the findings of all the selective agglomeration (SA) test work performed with emphasis on the results of the PDU SA Module testing. Two light hydrocarbons, heptane and pentane, were tested as agglomerants in the laboratory research program which investigated two reactor design concepts: a conventional two-stage agglomeration circuit and a unitized reactor that combined the high- and low-shear operations in one vessel. The results were used to design and build a 25 lb/hr bench-scale unit with two-stage agglomeration. The unit also included a steam stripping and condensation circuit for recovery and recycle of heptane. It was tested on six coals to determine the optimum grind and other process conditions that resulted in the recovery of about 99% of the energy while producing low ash (1-2 lb/MBtu) products. The fineness of the grind was the most important variable with the D80 (80% passing size) varying in the 12 to 68 micron range. All the clean coals could be formulated into coal-water-slurry-fuels with acceptable properties. The bench-scale results were used for the conceptual and detailed design of the PDU SA Module which was integrated with the existing grinding and dewatering circuits. The PDU was operated for about 9 months. During the first three months, the shakedown testing was performed to fine tune the operation and control of various equipment. This was followed by parametric testing, optimization/confirmatory testing, and finally a

  7. Sustainable energy for the future. Modelling transitions to renewable and clean energy in rapidly developing countries.

    NARCIS (Netherlands)

    Urban, Frauke

    2009-01-01

    The main objective of this thesis is first to adapt energy models for the use in developing countries and second to model sustainable energy transitions and their effects in rapidly developing countries like China and India. The focus of this thesis is three-fold: a) to elaborate the differences bet

  8. Clean-Burning Fuel for Use in Woodstoves: Feminist Politics, Community Development and Global Sustainability.

    Science.gov (United States)

    Grace, Victoria; Arnoux, Louis

    1998-01-01

    Rural women in less-developed nations use fuels that can be toxic and are becoming scarce. Feminist, sociological, and community-development issues were involved in the process of introducing clear-burning fuel, enabling a focus on both the effects on the health of fuel users and concern for ecological sustainability. (SK)

  9. Suitability of hyperspectral imaging technique to evaluate the effectiveness of the cleaning of a crustose lichen developed on granite

    Science.gov (United States)

    Pozo-Antonio, J. S.; Fiorucci, M. P.; Rivas, T.; López, A. J.; Ramil, A.; Barral, D.

    2016-02-01

    The aim of this paper was to evaluate the effectiveness of the laser cleaning of a complex biogenic patina, a crustose lichen, by means of hyperspectral imaging techniques. Samples of a Hercynian granite from NW Spain colonised by an endolithic crustose lichen ( Pertusaria amara) were collected and cleaned following three procedures: a scalpel, the third harmonic of a Nd:YVO4 ns laser and the scalpel followed by the laser. The suitability of the hyperspectral camera as a non-destructive, online, fast and in situ monitoring technique to assess the effectiveness of the cleaning was evaluated using optical microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy and colour measurements in CIELAB space. The hyperspectral imaging technique allowed us to measure the reflectivity variations of the cleaned surfaces in a non-invasive way, allowing the identification of the cleaning effectiveness of each procedure. Nevertheless, the results of the hyperspectral imaging technique must be validated by conventional techniques.

  10. Development of a hot heat exchanger and a cleaning system for a 35 kW hermetic four cylinder Stirling engine for solid biomass fuels

    DEFF Research Database (Denmark)

    Carlsen, Henrik; Marinitsch, Gerald; Schöch, Martin

    2005-01-01

    of the hot gas heat exchanger by primary measures efficiently. Consequently, a new pneumatic cleaning system has been developed, in order to increase the intervals between manual cleaning and thus the availability of the Stirling engine. The system is integrated into the furnace and works fully automatically....... Based on the new technology developed, a pilot plant was designed and erected. The nominal electric power output of the plant amounts to 35 kWel and the nominal thermal output to approx. 250 kWth. The plant is already in operation since the end of May 2005. First operating experiences proved...

  11. HYDROLOGICALLY DRIVEN MECHANISMS OF HEADCUT DEVELOPMENT

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    An analytic investigation of the effect of surface seal mechanical properties, overland flow, and subsurface hydrology was performed on headcut development. Headcut growth rates on upland areas have been observed to be quite small (less than 0.00015 meter per second) and that they occur in increments in which chips break off at points where cracks have developed in surface seals. The substrate soil under the seal collapses and is removed by the flow. This mode of headcut development is the result of a strong interaction between the surface and the subsurface processes. The surface process is energetically controlled by the mechanical features of the seal whereas the subsurface process is hydrologically controlled. The analysis yields estimates of the temporal scale of headcut velocities. In cases of infiltration from the vertical gully wall into the substrate, the flexural wave velocity (seismic sound velocity) was found to inversely affect headcut velocity.

  12. Assessment and evaluation of ceramic filter cleaning techniques: Task Order 19

    Energy Technology Data Exchange (ETDEWEB)

    Chen, H.; Zaharchuk, R.; Harbaugh, L.B.; Klett, M.

    1994-10-01

    The objective of this study was to assess and evaluate the effectiveness, appropriateness and economics of ceramic barrier filter cleaning techniques used for high-temperature and high-pressure particulate filtration. Three potential filter cleaning techniques were evaluated. These techniques include, conventional on-line pulse driven reverse gas filter cleaning, off-line reverse gas filter cleaning and a novel rapid pulse driven filter cleaning. These three ceramic filter cleaning techniques are either presently employed, or being considered for use, in the filtration of coal derived gas streams (combustion or gasification) under high-temperature high-pressure conditions. This study was divided into six subtasks: first principle analysis of ceramic barrier filter cleaning mechanisms; operational values for parameters identified with the filter cleaning mechanisms; evaluation and identification of potential ceramic filter cleaning techniques; development of conceptual designs for ceramic barrier filter systems and ceramic barrier filter cleaning systems for two DOE specified power plants; evaluation of ceramic barrier filter system cleaning techniques; and final report and presentation. Within individual sections of this report critical design and operational issues were evaluated and key findings were identified.

  13. Self-cleaning properties, mechanical stability, and adhesion strength of transparent photocatalytic TiO(2)-ZnO coatings on polycarbonate.

    Science.gov (United States)

    Fateh, Razan; Dillert, Ralf; Bahnemann, Detlef

    2014-02-26

    Transparent layers containing TiO2 have been intensively studied because of their interesting application potential including photocatalytically active and self-cleaning surfaces. In the present work, transparent TiO2-ZnO thin films on a SiO2 interlayer were successfully deposited on the surface of polycarbonate to provide polymeric sheets with a self-cleaning, superhydrophilic, and photocatalytically active surface layer. To ensure a good adhesion of the SiO2 interlayer, the polycarbonate sheets were first modified by irradiation with UV(C) light. The prepared films were characterized by UV/vis spectrophotometry, SEM, XRD, Raman spectroscopy, ellipsometry, and water contact-angle measurements. All prepared films are transparent, have thicknesses in the range between 120 and 250 nm, and possess superhydrophilic properties. Moreover, they exhibit good adhesion qualities as defined quantitatively by cross-cut tests. However, their mechanical strengths, checked by felt-abrasion tests, differ by changing the molar TiO2-ZnO ratio. The photocatalytic activity, expressed as photonic efficiency, of the coated surfaces was estimated from the kinetics of the photocatalytic degradation of methylene blue and methyl stearate. The combination between superhydrophilic properties and photocatalytic activity was determined by studying the change of water contact angle during the storage of the prepared films in the dark under an ambient atmosphere and under an atmosphere containing either acetone or isopropanol followed by UV(A) irradiation. In addition, self-cleaning properties were examined by determining the changes in the contact angle during the irradiation time after applying oleic acid to the surface. The results show that increasing the molar ratio of ZnO in TiO2 coatings up to 5% yields maximum photonic efficiency values of 0.023%, as assessed by the photocatalytic degradation of methylene blue. Moreover, the superhydrophilic coating with a molar TiO2-ZnO ratio of 1

  14. Development of OTM Syngas Process and Testing of Syngas Derived Ultra-clean Fuels in Diesel Engines and Fuel Cells

    Energy Technology Data Exchange (ETDEWEB)

    E.T. (Skip) Robinson; James P. Meagher; Prasad Apte; Xingun Gui; Tytus R. Bulicz; Siv Aasland; Charles Besecker; Jack Chen Bart A. van Hassel; Olga Polevaya; Rafey Khan; Piyush Pilaniwalla

    2002-12-31

    This topical report summarizes work accomplished for the Program from November 1, 2001 to December 31, 2002 in the following task areas: Task 1: Materials Development; Task 2: Composite Development; Task 4: Reactor Design and Process Optimization; Task 8: Fuels and Engine Testing; 8.1 International Diesel Engine Program; 8.2 Nuvera Fuel Cell Program; and Task 10: Program Management. Major progress has been made towards developing high temperature, high performance, robust, oxygen transport elements. In addition, a novel reactor design has been proposed that co-produces hydrogen, lowers cost and improves system operability. Fuel and engine testing is progressing well, but was delayed somewhat due to the hiatus in program funding in 2002. The Nuvera fuel cell portion of the program was completed on schedule and delivered promising results regarding low emission fuels for transportation fuel cells. The evaluation of ultra-clean diesel fuels continues in single cylinder (SCTE) and multiple cylinder (MCTE) test rigs at International Truck and Engine. FT diesel and a BP oxygenate showed significant emissions reductions in comparison to baseline petroleum diesel fuels. Overall through the end of 2002 the program remains under budget, but behind schedule in some areas.

  15. Development and screening of selective catalysts for the synthesis of clean liquid fuels

    NARCIS (Netherlands)

    Scholten, J.J.F.; Xiaoding, Xu; Drecken, von der C.-B.; Höhlein, B.; Mausbeck, D.; Ross, J.R.H.; Slaa, J.; Hoffmann, U.; Kunz, U.; Stölting, H.

    1994-01-01

    This article is a compilation of the research carried out under EEC contract EN3V-0400-D at the Institut für Energieverfahrenstechnik in Jülich and at the Faculty of Chemical Technology and Materials Science, Delft, concerning the development and screening of copper/cobalt-based catalysts for the sy

  16. A Framework for Engaging Navajo Women in Clean Energy Development through Applied Theatre

    Science.gov (United States)

    Osnes, Beth; Manygoats, Adrian; Weitkamp, Lindsay

    2015-01-01

    Through applied theatre, Navajo women can participate in authoring a new story for how energy is mined, produced, developed, disseminated and used in the Navajo Nation. This article is an analysis of a creative process that was utilised with primarily Navajo women to create a Navajo Women's Energy Project (NWEP). The framework for this creative…

  17. Engineering development of advanced physical fine coal cleaning technologies: Froth flotation

    Energy Technology Data Exchange (ETDEWEB)

    1990-01-01

    An engineering development project was prepared to build upon the basic research effort conducted under a solicitation for research into Fine Coal Surface Control. The engineering development project is intended to use general plant design knowledge and conceptualize a plant to utilize advanced froth flotation technology to process coal and produce a product having maximum practical pyritic sulfur reduction consistent with maximum practical BTU recovery. This is being accomplished by utilization the basic research data on the surface properties of coal, mineral matter and pyrite obtained from the Coal Surface Control for Advanced Fine Coal Flotation Project, to develop this conceptual flowsheet. The conceptual flowsheet must be examined to identify critical areas that need additional design data. This data will then be developed using batch and semi-continuous bench scale testing. In addition to actual bench scale testing other unit operations from other industries processing fine material will be reviewed for potential application and incorporated into the design if appropriate. 31 figs., 22 tabs.

  18. Renewable energies for the South. New support for clean energy investment in developing countries

    Energy Technology Data Exchange (ETDEWEB)

    Jung, W.; Schmitz-Borchert, H.P. (eds.)

    2001-07-01

    At the beginning of the 21st century there are still more than two billion people in the world without access to electricity and basic energy services. 'Energy poverty' impedes sustainable economic, social and environmental development of rural areas in developing countries. Large-scale diffusion of renewable energy technologies can help to overcome this situation. Major barriers are now beginning to be removed. This volume is the result of an international symposium on 'Renewable Energies for the South', held at the Science Park Gelsenkirchen, Gelsenkirchen/Germany. In took place on June 5-6, 2000 with more than 200 participants from 27 countries. The conference aimed at enhancing the dialogue between the multiple groups and actors involved in the development, transfer and application of renewable energy technologies. The following issues are covered in this book: - technology needs and framework conditions in developing countries - appropriate renewable energy technologies - financing renewable energy investment - capacity building and training programmes. (orig.)

  19. Clean birth kits to improve birth practices: development and testing of a country level decision support tool

    Directory of Open Access Journals (Sweden)

    Hundley Vanora A

    2012-12-01

    Full Text Available Abstract Background Clean birth practices can prevent sepsis, one of the leading causes of both maternal and newborn mortality. Evidence suggests that clean birth kits (CBKs, as part of package that includes education, are associated with a reduction in newborn mortality, omphalitis, and puerperal sepsis. However, questions remain about how best to approach the introduction of CBKs in country. We set out to develop a practical decision support tool for programme managers of public health systems who are considering the potential role of CBKs in their strategy for care at birth. Methods Development and testing of the decision support tool was a three-stage process involving an international expert group and country level testing. Stage 1, the development of the tool was undertaken by the Birth Kit Working Group and involved a review of the evidence, a consensus meeting, drafting of the proposed tool and expert review. In Stage 2 the tool was tested with users through interviews (9 and a focus group, with federal and provincial level decision makers in Pakistan. In Stage 3 the findings from the country level testing were reviewed by the expert group. Results The decision support tool comprised three separate algorithms to guide the policy maker or programme manager through the specific steps required in making the country level decision about whether to use CBKs. The algorithms were supported by a series of questions (that could be administered by interview, focus group or questionnaire to help the decision maker identify the information needed. The country level testing revealed that the decision support tool was easy to follow and helpful in making decisions about the potential role of CBKs. Minor modifications were made and the final algorithms are presented. Conclusion Testing of the tool with users in Pakistan suggests that the tool facilitates discussion and aids decision making. However, testing in other countries is needed to determine

  20. Development of membrane technology for production of concentrated fertilizer and clean water

    DEFF Research Database (Denmark)

    Camilleri Rumbau, Maria Salud

    The global increasing livestock production is reflected in a high rate of animal waste production, commonly known as manure or animal slurry. These effluents are rich in nutrients such as nitrogen, phosphorus and potassium. Solid-liquid separation of farm effluents is a common practice for obtain......The global increasing livestock production is reflected in a high rate of animal waste production, commonly known as manure or animal slurry. These effluents are rich in nutrients such as nitrogen, phosphorus and potassium. Solid-liquid separation of farm effluents is a common practice...... for obtaining a phosphorus-rich fraction and a liquid fraction rich in nitrogen and potassium. However, the nutrient concentration in the obtained liquid fractions remains unbalanced due to the high water content. Membrane technologies have previously proved to be a suitable technology for separation...... and concentration of liquid fractions from farm effluents. Based on literature data, by coupling membrane technologies with a solid-liquid mechanical separation technique with low energy consumption, such as screw presses, membrane systems proved to present the best economic potential compared to technologies...

  1. Partnerships for Clean Development and Climate: Business andTechnology Cooperation Benefits

    Energy Technology Data Exchange (ETDEWEB)

    Sathaye, Jayant A.; Price, Lynn; Kumar, Satish; de la Rue du Can,Stephane; Warfield, Corina; Padmanabhan, S.

    2006-08-22

    Development and poverty eradication are urgent andoverriding goals internationally. The World Summit on SustainableDevelopment made clear the need for increased access to affordable,reliable and cleaner energy and the international community agreed in theDelhi Declaration on Climate Change and Sustainable Development on theimportance of the development agenda in considering any climate changeapproach. To this end, six countries (Australia, China, India, Japan,Republic of Korea and the United States) have come together to form theAsia Pacific Partnership in accordance with their respective nationalcircumstances, to develop, deploy and transfer cleaner, more efficienttechnologies and to meet national pollution reduction, energy securityand climate change concerns consistent with the principles of the U.N.Framework Convention on Climate Change (UNFCCC). The APP builds on thefoundation of existing bilateral and multilateral initiativescomplements.APP has established eight public-private sector Task Forcescovering: (1) cleaner fossil energy; (2) renewable energy and distributedgeneration; (3) power generation and transmission; (4) steel; (5)aluminium; (6) cement; (7) coal mining; and (8) buildings and appliances.As a priority, each Task Force will formulate detailed action plansoutlining both immediate and medium-term specific actions, includingpossible "flagship" projects and relevant indicators of progress by 31August 2006. The partnership will help the partners build human andinstitutional capacity to strengthen cooperative efforts, and will seekopportunities to engage the private sector. The APP organized An OutreachWorkshop: Business&Technology Cooperation Opportunities forIndustry on August 26, 2006, New Delhi. This paper was prepared toprovide background information for participants of the Conference. Ithighlights energy efficiency, renewable energy, and climate technologies,barriers, and partnerships that are being implemented in the US, Indiaand other selected

  2. Barrier Mechanisms in the Developing Brain

    OpenAIRE

    Saunders, Norman R.; Liddelow, Shane A.; Dziegielewska, Katarzyna M.

    2012-01-01

    The adult brain functions within a well-controlled stable environment, the properties of which are determined by cellular exchange mechanisms superimposed on the diffusion restraint provided by tight junctions at interfaces between blood, brain and cerebrospinal fluid (CSF). These interfaces are referred to as “the” blood–brain barrier. It is widely believed that in embryos and newborns, this barrier is immature or “leaky,” rendering the developing brain more vulnerable to drugs or toxins ent...

  3. Locally Appropriate Energy Strategies for the Developing World: A focus on Clean Energy Opportunities in Borneo

    Science.gov (United States)

    Shirley, Rebekah Grace

    This dissertation focuses on an integration of energy modeling tools to explore energy transition pathways for emerging economies. The spate of growth in the global South has led to a global energy transition, evidenced in part by a surge in the development of large scale energy infrastructure projects for the provision of reliable electricity service. The rational of energy security and exigency often usher these large scale projects through to implementation with minimal analysis of costs: social and environmental impact, ecological risk, or opportunity costs of alternative energy transition pathways foregone. Furthermore, development of energy infrastructure is inherently characterized by the involvement of a number of state and non-state actors, with varying interests, objectives and access to authority. Being woven through and into social institutions necessarily impacts the design, control and functionality of infrastructure. In this dissertation I therefore conceptualize energy infrastructure as lying at the intersection, or nexus, of people, the environment and energy security. I argue that energy infrastructure plans and policy should, and can, be informed by each of these fields of influence in order to appropriately satisfy local development needs. This case study explores the socio-techno-environmental context of contemporary mega-dam development in northern Borneo. I describe the key actors of an ongoing mega-dam debate and the constellation of their interaction. This highlights the role that information may play in public discourse and lends insight into how inertia in the established system may stymie technological evolution. I then use a combination of power system simulation, ecological modeling and spatial analysis to analyze the potential for, and costs and tradeoffs of, future energy scenarios. In this way I demonstrate reproducible methods that can support energy infrastructure decision making by directly addressing data limitation barriers. I

  4. FY1995 development of a clean CVD process by evaluation and control of gas phase nucleation phenomena; 1995 nendo kisokaku seisei gensho no hyoka to seigyo ni yoru clean CVD process no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The purpose of this study is to develop a high-rate and clean chemical vapor deposition (CVD) process as a breakthrough technique to overcome the problems that particles generated in the gas phase during CVD process for preparation of functional thin films cause reduced product yield and deterioration of the films. In the CVD process proposed here, reactant gas and generated particles are electrically charged to control the motion of them with an electric field. In this study, gas-phase nucleation phenomena are evaluated both theoretically and experimentally. A high-rate, ionized CVD method is first developed, in which reactant gas and generated particles are charged with negative ions generated from a radioisotope source and the UV/photoelectron method, and the motion of the charged gas and particles is controlled with an electric field. Charging and transport processes of fine particles are then investigated experimentally and theoretically to develop a clean CVD method in which generated particles are removed with the electric forces. As a result, quantitative evaluation of the charging and transport process was made possible. We also developed devices for measuring the size distribution and concentration of fine particles in low pressure gas such as those found in plasma CVD processes. In addition, numerical simulation and experiments in this study for a TEOS/O{sub 3} CVD process to prepare thin films could determine reaction rates which have not been known so far and give information on selecting good operation conditions for the process. (NEDO)

  5. Clean catch urine sample

    Science.gov (United States)

    ... specimen; Urine collection - clean catch; UTI - clean catch; Urinary tract infection - clean catch; Cystitis - clean catch ... LE, Norrby SR. Approach to the patient with urinary tract infection. In: Goldman L, Schafer AI, eds. Goldman-Cecil ...

  6. Joint implementation, clean development mechanism and Tradable Permits. International regulation of greenhouse gases

    Energy Technology Data Exchange (ETDEWEB)

    Nielsen, L.; Rose Olsen, K.

    2000-06-01

    A 'correct' accreditation is a key issue when evaluating Joint Implementation as a global environmental instrument. Problems mentioned in the literature on Joint Implementation - including the problem of additionality - are often relating to the problem of defining a correct accreditation. This paper lists some of these problems and lists some of the tools available to solve the reported problems of accreditation. The paper concludes that the institutional framework is crucial in defining what a correct accreditation is. It also concludes that different groups may have different interests in Joint Implementation, and that each of the reported problems may be a problem to some of the Joint Implementation interests groups but not to others. In designing the institutional framework for JI it is important to know the incentives and motivations of the different groups. The main part of the paper is an analysis of the basic incentives and motivations of the different Joint Implementation interest groups. This analysis can be used to weight the problems of Joint Implementation from an environmental perspective and from the perspective of cost effectiveness. (au)

  7. Enrichment Planting in Secondary Forests: a Promising Clean Development Mechanism to Increase Terrestrial Carbon Sinks

    Directory of Open Access Journals (Sweden)

    Alain Paquette

    2009-06-01

    provee un ingreso a las comunidades de países en desarrollo para mantener servicios ambientales. Proponemos un enriquecimiento de plantación cubierta (EP en rastrojos o bosques secundarios utilizando especies de maderas nativas preciosas como alternativa forestal y proyecto de carbono a pequeña escala. Los diferentes aspectos de implementación del A/R-MDL actual están tomados en cuenta. Discutimos la EP en el contexto de investigaciones continuas en la comunidad indígena Ipetí-Emberá en Panamá-Este. En nuestro sitio, el potencia de almacenamiento de carbono para la EP podría ser de 113 Mg C ha-1, lo cual es comparable a otros usos del suelo como plantaciones de teca y bosque primario. Como los rastrojos presentan una alta producción de biomasa, proyectos de carbono con EP podría acumular cantidades grandes de carbono atmosférico mientras se proveen beneficios socio-económicos. Al mismo tiempo EP podría mantener la estructura ecológica del bosque secundario y la biodiversidad promoviendo sinergias entre dos convenios: el de Biodiversidad y el de cambios climáticos.

  8. Development of High Efficiency Clean Combustion Engine Designs for Spark-Ignition and Compression-Ignition Internal Combustion Engines

    Energy Technology Data Exchange (ETDEWEB)

    Marriott, Craig; Gonzalez, Manual; Russell, Durrett

    2011-06-30

    This report summarizes activities related to the revised STATEMENT OF PROJECT OBJECTIVES (SOPO) dated June 2010 for the Development of High-Efficiency Clean Combustion engine Designs for Spark-Ignition and Compression-Ignition Internal Combustion Engines (COOPERATIVE AGREEMENT NUMBER DE-FC26-05NT42415) project. In both the spark- (SI) and compression-ignition (CI) development activities covered in this program, the goal was to develop potential production-viable internal combustion engine system technologies that both reduce fuel consumption and simultaneously met exhaust emission targets. To be production-viable, engine technologies were also evaluated to determine if they would meet customer expectations of refinement in terms of noise, vibration, performance, driveability, etc. in addition to having an attractive business case and value. Prior to this activity, only proprietary theoretical / laboratory knowledge existed on the combustion technologies explored The research reported here expands and develops this knowledge to determine series-production viability. Significant SI and CI engine development occurred during this program within General Motors, LLC over more than five years. In the SI program, several engines were designed and developed that used both a relatively simple multi-lift valve train system and a Fully Flexible Valve Actuation (FFVA) system to enable a Homogeneous Charge Compression Ignition (HCCI) combustion process. Many technical challenges, which were unknown at the start of this program, were identified and systematically resolved through analysis, test and development. This report documents the challenges and solutions for each SOPO deliverable. As a result of the project activities, the production viability of the developed clean combustion technologies has been determined. At this time, HCCI combustion for SI engines is not considered production-viable for several reasons. HCCI combustion is excessively sensitive to control variables

  9. Development and demonstration of a mobile reverse osmosis adsorption treatment system for environmental emergency clean-ups

    Energy Technology Data Exchange (ETDEWEB)

    1988-03-01

    A project was undertaken to develop and demonstrate a mobile reverse osmosis/adsorption system for treating water contaminated by organic chemicals. The system has two primary unit operations. The contaminated water is processed by reverse osmosis to produce a clean stream for discharge and a stream for further processing in which the organic contaminants have been concentrated up to 10 times their original concentration. The latter stream is treated in granular adsorbent columns where the contaminants are removed and an effluent suitable for discharge is produced. The contaminated water can be treated on-site and the contaminants can be removed from the site adsorbed on a relatively small amount of carbon. Field tests were conducted at two sites, one contaminated by leachate from a former chemical waste landfill and the other by drainage water from a petroleum and petrochemical transfer station. The 60-day demonstrations showed that reverse osmosis technology can be successfully used for treatment of water contaminated by toxic volatile organics and that granular activated carbon adsorption columns can be successfully used to remove those organics from the concentrate produced by reverse osmosis processing. However, the study also showed that the presence of significant quantities of suspended materials or Fe cause operational problems which limit the success of reverse osmosis processing under these conditions. These problems can be effectively addressed by adding an ultrafiltration pretreatment. 13 refs., 60 figs., 56 tabs.

  10. Study on Pricing Compensation Mechanism of Clean Energy Based on Triangle Fuzzy Number%基于三角模糊数的清洁能源电价补偿机制

    Institute of Scientific and Technical Information of China (English)

    谭忠富; 何楠; 周凤翱; 张科

    2013-01-01

    By setting an effective and reasonable compensation mechanism of clean energy pricing, it can promote clean energy power to develop easily. Based on the externalities of clean power, this paper identifies the reasonable compensation range by triangle fuzzy number and calculates the compensation value of different objects by degree of membership, the objects include clean power plants, power enterprises and power consumers. In order to study this problem clearly, it took wind power for an example and made quantity research in the measures of improving power pricing compensation mechanism by triangle fuzzy number and object constraint theories. To power users, the reasonable compensation range is 0. 002 yuan/kW · h-0. 008 yuan/kW · h. To power enterprises, the range is 3 869. 48 yuan/MW-16 096. 74 yuan/MW. To clean power plants (wind power plant), the range is 0. 218 9 yuan/kW· h-0. 241 2 yuan/kW · h. The results show that compensation ranges are relative to the different objects, and the compensation value will change by the quantities of clean power in gird.%为了制定合理的清洁能源电价补偿机制,推动清洁能源电力的有效发展,分析了我国清洁能源电价补偿机制现状及存在的问题,基于清洁能源电力的外部性特征,引入三角模糊数,通过模糊数将补偿机制中补偿金额的计算扩展为补偿区间的确定,同时将不同对象的可能补偿额度定为隶属度;并以风电为例,运用模糊响应公式对其补偿区间进行了量化分析.结果表明,电力用户补偿区间为0.002~0.008元/(kW·h),电网企业补偿区间为3 869.48~16 096.74元/MW,清洁能源电厂(风电厂)补偿区间为0.218 9~0.241 2元/(kW·h),且清洁能源电力的各级补偿区间与补偿对象密切相关,补偿额度也会随其上网电量的变化而波动.

  11. 储油罐机械清洗过程中静电的产生与控制%Cause and control of static electricity during mechanical cleaning of crude oil tank

    Institute of Scientific and Technical Information of China (English)

    庞雷; 薛胜雄; 王永强; 刘燕; 陈正文

    2012-01-01

    机械清洗中设备的运行容易产生静电,人员的活动也容易产生人体带电。分析了储油罐机械清洗过程中产生静电的设备因素和人员因素,并给出了控制静电的相应方法,为机械清洗的顺利进行提供安全保障。%The static electricity was produced during the running of the mechanical cleaning equip- ments and the moving of the workers. Through the analysis of factors about static electricity producing during the mechanical cleaning of crude oil tank, this paper gives the control methods of static electricity. Its ensure that the mechanical cleaning could run safely.

  12. Clean coal technologies market potential

    Energy Technology Data Exchange (ETDEWEB)

    Drazga, B. (ed.)

    2007-01-30

    Looking at the growing popularity of these technologies and of this industry, the report presents an in-depth analysis of all the various technologies involved in cleaning coal and protecting the environment. It analyzes upcoming and present day technologies such as gasification, combustion, and others. It looks at the various technological aspects, economic aspects, and the various programs involved in promoting these emerging green technologies. Contents: Industry background; What is coal?; Historical background of coal; Composition of coal; Types of coal; Environmental effects of coal; Managing wastes from coal; Introduction to clean coal; What is clean coal?; Byproducts of clean coal; Uses of clean coal; Support and opposition; Price of clean coal; Examining clean coal technologies; Coal washing; Advanced pollution control systems; Advanced power generating systems; Pulverized coal combustion (PCC); Carbon capture and storage; Capture and separation of carbon dioxide; Storage and sequestration of carbon dioxide; Economics and research and development; Industry initiatives; Clean Coal Power Initiative; Clean Coal Technology Program; Coal21; Outlook; Case Studies.

  13. Modern mechanical engineering research, development and education

    CERN Document Server

    2014-01-01

    This book covers modern subjects of mechanical engineering such as nanomechanics and nanotechnology, mechatronics and robotics, computational mechanics, biomechanics, alternative energies, sustainability as well as all aspects related with mechanical engineering education. The chapters help enhance the understanding of both the fundamentals of mechanical engineering and its application to the solution of problems in modern industry. This book is suitable for students, both in final undergraduate mechanical engineering courses or at the graduate level. It also serves as a useful reference for academics, mechanical engineering researchers, mechanical, materials and manufacturing engineers, professionals in related with mechanical engineering.

  14. Developing Attention: Behavioral and Brain Mechanisms

    Directory of Open Access Journals (Sweden)

    Michael I. Posner

    2014-01-01

    Full Text Available Brain networks underlying attention are present even during infancy and are critical for the developing ability of children to control their emotions and thoughts. For adults, individual differences in the efficiency of attentional networks have been related to neuromodulators and to genetic variations. We have examined the development of attentional networks and child temperament in a longitudinal study from infancy (7 months to middle childhood (7 years. Early temperamental differences among infants, including smiling and laughter and vocal reactivity, are related to self-regulation abilities at 7 years. However, genetic variations related to adult executive attention, while present in childhood, are poor predictors of later control, in part because individual genetic variation may have many small effects and in part because their influence occurs in interaction with caregiver behavior and other environmental influences. While brain areas involved in attention are present during infancy, their connectivity changes and leads to improvement in control of behavior. It is also possible to influence control mechanisms through training later in life. The relation between maturation and learning may allow advances in our understanding of human brain development.

  15. Development of a mechanical homogenizer coffee

    Directory of Open Access Journals (Sweden)

    Raphael Magalhães Gomes Moreira

    2013-12-01

    Full Text Available The crop Coffee demands investments to the machines development, which it enables the processes ofpost-harvesting, becoming them faster, meanwhile improving the working. The use of stationary layer dryers are responsible for good results at drying and product quality, but it requires a constant revolving, in order to homogenize the grain mass and improve the air distribution inside the drying chamber. The shortage of workmanship, associated to the need of constant revolving and the heavy working conditions, it becomes it indispensable to mechanize, in some way, this step. The agricultural machine design is considered of great complexity, regarding it must be concerned with the interactions among the operator, machine and environment. When designing a machine, the experience and the dominion of several standpoints have to be interpreted clearly. With the increasing competitiveness on the consumer market and agricultural machines, several companies have joined the research centers, because in general, do not make use of systematic procedures during the project, which can result in failures during operation. This article aimed to design and build a semi-mechanized revolving prototype used to mix the coffee beans. The revolving prototype with the helical screw principles proved to be able to performing the grains transport efficiently.

  16. Self-cleaning geopolymer concrete - A review

    Science.gov (United States)

    Norsaffirah Zailan, Siti; Mahmed, Norsuria; Bakri Abdullah, Mohd Mustafa Al; Sandu, Andrei Victor

    2016-06-01

    Concrete is the most widely used construction materials for building technology. However, cement production releases high amounts of carbon dioxide (CO2) to the atmosphere that leads to increasing the global warming. Thus, an alternative, environmental friendly construction material such as geopolymer concrete has been developed. Geopolymer concrete applies greener alternative binder, which is an innovative construction material that replaces the Portland cement. This technology introduced nano-particles such as nanoclay into the cement paste in order to improve their mechanical properties. The concrete materials also have been developed to be functioned as self-cleaning construction materials. The self-cleaning properties of the concrete are induced by introducing the photocatalytic materials such as titania (TiO2) and zinc oxide (ZnO). Self-cleaning concrete that contains those photocatalysts will be energized by ultraviolet (UV) radiation and accelerates the decomposition of organic particulates. Thus, the cleanliness of the building surfaces can be maintained and the air surrounding air pollution can be reduced. This paper briefly reviews about self-cleaning concrete.

  17. The Development History of the Post CMP Cleaning Technology%CMP后清洗技术发展历程

    Institute of Scientific and Technical Information of China (English)

    周国安; 徐存良

    2013-01-01

    T he paper analyses the post C M P technology com bing w ith the typical C M P equipm ent from 1980s. Such as: M ultiple tanks im m erse w et chem ical cleaning、in-line cleaning、200m m integrated cleaning、300m m integrated cleaning and the cleaning trend sub the 20nm technology node. E ach post C M P cleaning technology com bing w ith the C M P equipm ent, analyzing its special、advantage and shortage.The paperanalysesthe industry postCM P cleaning from allaspect.%从80年代开始,结合当时最具代表性的CMP设备,分析当时的后清洗技术,如:多槽浸泡式化学湿法清洗、在线清洗、200mm集成清洗、300mm集成清洗及20nm以下的CMP后清洗趋势,每种后清洗技术都结合CMP设备明确分析其技术特色,优点和缺陷。全面阐述CMP工业界的后清洗发展历程。

  18. Effect On mechanical functions of high-speed dental handpieces by different cleaning methods%3种清洗方法对牙科手机机械性能的影响

    Institute of Scientific and Technical Information of China (English)

    舒香云; 王晓彦; 耿发云; 叶森娣; 叶静梅

    2011-01-01

    目的:比较不同清洗方法对牙科手机机械性能的影响,探讨最佳清洗方法.方法:将全新牙科手机120支随机分成A、B、C3组,A组:采用纯手工的方法清洗;B组:采用超声清洗机清洗;C组:采用热清洗机清洗,1年后对3种不同方法清洗后的牙科手机机械性能进行比较分析.结果:A组手机转速、夹持力及锈蚀损坏都是最严重的.C组次之,而B组清洗的牙科手机损坏是最轻的.结论:采用超声波清洗机(B组)能较好地维护牙科手机的机械性能,建议推广使用.%Objective: To explore the best cleaning method through comparing the effect on mechanical function of high-speed dental handpieces by different cleaning methods. Methods: One hundred and twenty new high-speed dental handpieces were divided into A, B and C groups randomly. Dental handpieces in group A were cleaned by manual method;ultrasonic cleaning system and auto-heating cleaning unit were used in Group B and C. Mechanical functions of high-speed dental handpieces were tested one year later. Results: The mechanical functions including rotation speed, clamping force and tarnishing of high-speed dental handpieces in group A were damaged most severely, then group C, and dental handpieces in group B were damaged most lightly. Conclusion: The use of ultrasonic cleaning machine could better maintain mechanical functions of dental handpieces.

  19. Cleaning validation 1: development and validation of a chromatographic method for the detection of traces of LpHse detergent.

    Science.gov (United States)

    Zayas, José; Colón, Héctor; Garced, Omar; Ramos, Leyda M

    2006-05-03

    A high performance liquid chromatography (HPLC) method for the detection of traces of LpHse (4-tert-amylphenol and 2-phenylphenol) has been developed and validated. The method was shown to be linear in the range from 0.5 to 10.00 ppm in solution. The method was also shown to be accurate with a recovery of up to 95% by area response for amylphenol and up to 94% by area response for phenylphenol from metal surfaces (4''x4'' un-polished 304 stainless steel plates) by means of swab material. The reproducibility of the method was determined to be 1.61% by area response and 1.52% by height response for amylphenol and 5.40% by area response and 13.77% by height response for phenylphenol from solutions reported as the pooled relative standard deviation. The developed method was also shown to be rugged by comparisons of different preparations by different analysts. The limit of detection was established to be 0.076 ppm by peak area, 0.079 ppm by peak height for amylphenol and 0.34 ppm by peak area, 0.82 ppm by peak height for phenylphenol from solution, and 1.77 ppb by peak area, 1.23 ppm by peak height for amylphenol and 1.23 ppm by peak area, 1.44 ppm by peak height for phenylphenol from recovery from metal studies. The limit of quantitation was established to be 0.25 ppm by peak area, 0.26 ppm by peak height for amylphenol and 1.14 ppm by peak area, 2.73 ppm by peak height for phenylphenol from solution, and 3.89 ppm by peak area, 4.11 ppm by peak height for amylphenol and 4.11 ppm by peak area, 4.79 ppm by peak height for phenylphenol from recovery from metal plates studies. This method can be employed to determine the presence of LpHse residues in cleaned equipments where the detergent was used.

  20. Clean Development Mechanism” projects in the developing countries within the Kyoto protocol: problem analysis of a case study in Morocco

    Directory of Open Access Journals (Sweden)

    Gaglioppa P

    2009-11-01

    Full Text Available An internship period spent in the north of Morocco kingdom (Tetouan gave a contribute to the organization activity in promoting sustainable development in the rural areas under the Kyoto Protocol. The multitasking project will increase biodiversity planting trees for wood, forage and fruits productions. The paper show a first step study to evaluate the possibility to reach an agreement with the propriety and the manager of these areas in a multifunctional reforestation project. The eligible site suitable for reforestation in accordance with the CDM international scheme is a large plateau (more than 5000 hectares 600 meters high on the sea level far from the Cannabis crops area. The evaluation of the project costs and of the social benefits for the population consider (using different species the indigenous communities necessity. The evaluation of carbon sequestration show the small scale of the reforestation project on behalf of the Kyoto Protocol, but give also an idea about the people rights and necessities. The normal afforestation and reforestation projects, under the Kyoto Protocol, try to maximize the CO2 sequestration in a short time, than business laws usually require. A small scale project could be self-managing, less expensive (international certification costs and more interesting for local communities.

  1. Energetic laser cleaning of metallic particles and surface damage on silica optics: investigation of the underlying mechanisms

    Science.gov (United States)

    Shen, Nan; Demos, Stavros G.; Negres, Raluca A.; Rubenchik, Alexander M.; Harris, Candace D.; Matthews, Manyalibo J.

    2015-11-01

    Surface particulate contamination on optics can lead to laser-induced damage hence limit the performance of high power laser system. In this work we focus on understanding the fundamental mechanisms that lead to damage initiation by metal contaminants. Using time resolved microscopy and plasma spectroscopy, we studied the dynamic process of ejecting ~30 μm stainless steel particles from the exit surface of fused silica substrate irradiated with 1064 nm, 10 ns and 355 nm, 8 ns laser pulses. Time-resolved plasma emission spectroscopy was used to characterize the energy coupling and temperature rise associated with single, 10-ns pulsed laser ablation of metallic particles bound to transparent substrates. Plasma associated with Fe(I) emission lines originating from steel microspheres was observe to cool from laser energy.

  2. Hansen Cleaning Solvent Research Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Environmental regulation will force current baseline  precision cleaning solvent (AK-225) to be phased out starting 2015. We plan to develop  a new...

  3. Recent developments of mathematical fluid mechanics

    CERN Document Server

    Giga, Yoshikazu; Kozono, Hideo; Okamoto, Hisashi; Yamazaki, Masao

    2016-01-01

    The book addresses recent developments of the mathematical research on the Navier-Stokes and Euler equations as well as on related problems. In particular, there are covered:   1) existence, uniqueness, and the regularity of weak solutions; 2) stability of the motion in rest and the asymptotic behavior of solutions; 3) singularity and blow-up of weak and strong solutions; 4) vorticity and energy conservation; 5) motions of rotating fluids, or of fluids surrounding a rotating body; 6) free boundary problems; 7) maximal regularity theory and other abstract results for mathematical fluid mechanics.   For this quarter century, these topics have been playing a central role in both pure and applied mathematics and having a great influence to the developm ent of the functional analysis, harmonic analysis and numerical analysis whose tools make a a substantial contribution to the investigation of nonlinear partial differential equations, particularly the Navier-Stokes and the Euler equations.      There are 24...

  4. Epigenetic mechanisms in cardiac development and disease

    Institute of Scientific and Technical Information of China (English)

    Marcus Vallaster; Caroline Dacwag Vallaster; Sean M. Wu

    2012-01-01

    During mammalian development,cardiac specification and ultimately lineage commitment to a specific cardiac cell type is accomplished by the action of specific transcription factors (TFs) and their meticulous control on an epigenetic level.In this review,we detail how cardiacspecific TFs function in concert with nucleosome remodeling and histone-modifying enzymes to regulate a diverse network of genes required for processes such as cell growth and proliferation,or epithelial to mesenchymal transition (EMT),for instance.We provide examples of how several cardiac TFs,such as Nkx2.5,WHSC1,Tbx5,and Tbx1,which are associated with developmental and congenital heart defects,are required for the recruitment of histone modifiers,such as Jarid2,p300,and Ash21,and components of ATP-dependent remodeling enzymes like Brg1,Baf60c,and Baf180.Binding of these TFs to their respective sites at cardiac genes coincides with a distinct pattern of histone marks,indicating that the precise regulation of cardiac gene networks is orchestrated by interactions between TFs and epigenetic modifiers.Furthermore,we speculate that an epigenetic signature,comprised of TF occupancy,histone modifications,and overall chromatin organization,is an underlying mechanism that governs cardiac morphogenesis and disease.

  5. Clean Energy Solutions Center (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Reategui, S.

    2012-07-01

    The Clean Energy Ministerial launched the Clean Energy Solutions Center in April, 2011 for major economy countries, led by Australia and U.S. with other CEM partners. Partnership with UN-Energy is extending scope to support all developing countries: 1. Enhance resources on policies relating to energy access, small to medium enterprises (SMEs), and financing programs; 2. Offer expert policy assistance to all countries; 3. Expand peer to peer learning, training, and deployment and policy data for developing countries.

  6. Reuse of clean waste from the fashion industry in sustainable design development with a focus on social responsibility

    OpenAIRE

    Broega, A. C.; Santos, M. O.; SOARES, B.O.

    2016-01-01

    The present article relates the concept of design in the social sustainability focusing on the environmental issues in vogue, threatened under an excessive generation of clean solid wastes during the mass production of products from existing industries, textiles and footwear, towards the consume of today's societies. The search for imminent solutions face to this problem are centralized on the sustainable design, aiming essentially the co-design based on upcycling principles and the methods o...

  7. Clean Power on Tap

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    China adopts the most advanced nuclear power technologies to meet long-term energy needs Nuclear power has taken center stage in China’s nationwide cam-paign to develop new and clean energy sources. In the latest effort, Chinese state-owned nuclear power giants invested over 40 billion yuan ($5.86 billion) as an initial funding injection to build a new plant under the

  8. Children's questions: a mechanism for cognitive development.

    Science.gov (United States)

    Chouinard, Michael M

    2007-01-01

    Preschoolers' questions may play an important role in cognitive development. When children encounter a problem with their current knowledge state (a gap in their knowledge, some ambiguity they do not know how to resolve, some inconsistency they have detected), asking a question allows them to get targeted information exactly when they need it. This information is available to them when they are particularly receptive to it, and because it comes as the result of their own disequilibrium, it may have depth of processing benefits. In that questions allow children to get information they need to move their knowledge structures closer to adult-like states, the ability to ask questions to gather needed information constitutes an efficient mechanism for cognitive development (referred to in this paper as the Information Requesting Mechanism [IRM]; this term is used because it includes question-asking and other information recruiting behaviors such as gestures, expressions, and vocalizations). However, the role of children's questions in their cognitive development has been largely overlooked. If questions are a force in cognitive development, the following must be true: (1) children must actually ask questions that gather information; (2) children must receive informative answers to their questions if they are able to be of use to cognitive development; (3) children must be motivated to get the information they request, rather than asking questions for other purposes such as attention; (4) the questions children ask must be relevant and of potential use to their cognitive development; (5) we must see evidence that children's questions help them in some way-that is, that they can ask questions for a purpose, and use the information they receive purposefully to successfully achieve some change of knowledge state. This monograph reports data on these points. Study 1 analyzed questions taken from four children's transcripts in the CHILDES database (age 1;2-5;1). This

  9. Megasonic cleaning, cavitation, and substrate damage: an atomistic approach

    Science.gov (United States)

    Kapila, Vivek; Deymier, Pierre A.; Shende, Hrishikesh; Pandit, Viraj; Raghavan, Srini; Eschbach, Florence O.

    2006-05-01

    Megasonic cleaning has been a traditional approach for the cleaning of photomasks. Its feasibility as a damage free approach to sub 50 nm particulate removal is under investigation for the cleaning of optical and EUV photomasks. Two major mechanisms are active in a megasonic system, namely, acoustic streaming and acoustic cavitation. Acoustic streaming is instrumental in contaminant removal via application of drag force and rolling of particles, while cavitation may dislodge particles by the release of large energy during cavity implosion or by acting as a secondary source of microstreaming. Often times, the structures (substrates with or without patterns) subjected to megasonic cleaning show evidence of damage. This is one of the impediments in the implementation of megasonic technology for 45 nm and future technology nodes. Prior work suggests that acoustic streaming does not lead to sufficiently strong forces to cause damage to the substrates or patterns. However, current knowledge of the effects of cavitation on cleaning and damage can be described, at best, as speculative. Recent experiments suggest existence of a cavity size and energy distributions in megasonic systems that may be responsible for cleaning and damage. In the current work, we develop a two-dimensional atomistic model to study such multibubble cavitation phenomena. The model consists of a Lennard-Jones liquid which is subjected to sinusoidal pressure changes leading to the formation of cavitation bubbles. The current work reports on the effects of pressure amplitude (megasonic power) and frequency on cavity size distributions in vaporous and gaseous cavitation. The findings of the work highlight the role of multibubble cavitation as cleaning and damage mechanism in megasonic cleaning.

  10. Carbon nanotubes – becoming clean

    Directory of Open Access Journals (Sweden)

    Nicole Grobert

    2007-01-01

    Full Text Available Carbon nanotubes (CNTs are now well into their teenage years. Early on, theoretical predictions and experimental data showed that CNTs possess chemical and mechanical properties that exceed those of many other materials. This has triggered intense research into CNTs. A variety of production methods for CNTs have been developed; chemical modification, functionalization, filling, and doping have been achieved; and manipulation, separation, and characterization of individual CNTs is now possible. Today, products containing CNTs range from tennis rackets and golf clubs to vehicle fenders, X-ray tubes, and Li ion batteries. Breakthroughs for CNT-based technologies are anticipated in the areas of nanoelectronics, biotechnology, and materials science. In this article, I review the current situation in CNT production and highlight the importance of clean CNT material for the success of future applications.

  11. Study status and development tendency of tramcar cleaning technology%矿用清车技术的研究现状及发展趋势

    Institute of Scientific and Technical Information of China (English)

    廉凯

    2012-01-01

    矿车在装运煤炭、矸石等物料的过程中,车底会逐渐沉积一些杂物,大大降低了运输效率,影响矿车的使用寿命。在国内外清车技术研究现状的基础上,主要对国内外矿车结底清理的传统方法及先进技术的基本原理以及各自优缺点做了介绍,并分析了未来矿车清理技术的发展趋势。%Due to lots of sundries deposited at the bottom of the tramcar during transportation of coal and gangue,the transportation efficiency and lifespan of the tramcar greatly reduce.After studying the current situation of the tramcar cleaning technology at home and abroad,the paper introduced the traditional methods of cleaning agglomerate at tramcar bottom and basic principle of advanced technology and their advantages and disadvantages.In addition,it analyzed the development tendency of tramcar cleaning technology in future.

  12. Development of Crankshaft Cleaning Equipment Control System%发动机曲轴清洗设备控制系统的研究

    Institute of Scientific and Technical Information of China (English)

    陈伯豪; 姜莉莉; 张灿为; 何汪洋

    2014-01-01

    The crankshaft is the key part for medium and large diesel engine .The life of the crankshaft will be directly influenced by its surface cleanliness before assembly ,in order to solve the problems in manual cleaning ,a set of crankshaft cleaning control system was developed .The design of engine crankshaft cleaning process ,hardware system and software system were introduced in this paper .%曲轴为大中型柴油机发动机的关键零件,其装配前表面的干净度将直接影响到其后面的使用效果和使用时间,为解决人工清洗存在的弊端,研究开发了一套曲轴清洗自动控制系统。介绍了发动机曲轴清洗系统的工艺流程、硬件系统和软件系统的设计。

  13. Tracking Clean Energy Progress 2013

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-06-01

    Tracking Clean Energy Progress 2013 (TCEP 2013) examines progress in the development and deployment of key clean energy technologies. Each technology and sector is tracked against interim 2020 targets in the IEA Energy Technology Perspectives 2012 2°C scenario, which lays out pathways to a sustainable energy system in 2050. Stark message emerge: progress has not been fast enough; large market failures are preventing clean energy solutions from being taken up; considerable energy efficiency remains untapped; policies need to better address the energy system as a whole; and energy-related research, development and demonstration need to accelerate. Alongside these grim conclusions there is positive news. In 2012, hybrid-electric vehicle sales passed the 1 million mark. Solar photovoltaic systems were being installed at a record pace. The costs of most clean energy technologies fell more rapidly than anticipated.

  14. [A Case Study on the Rapid Cleaned Away of PM₂.₅ Pollution in Beijing Related with BL Jet and Its Mechanism].

    Science.gov (United States)

    Liao, Xiao-nong; Sun, Zhao-bin; He, Na; Zhao, Pu-sheng; Ma, Zhi-qiang

    2016-01-15

    The concentration of PM₂.₅ decreased very rapidly from 18:00 to 23:00 on 17th Mar. 2015 in Beijing area. No cold air bringing strong north wind influenced Beijing. The reason leading to the clean away of PM₂.₅ was discussed. The results showed that a boundary layer jet played a key role. The ventilation in the boundary layer went up with the enhancement of southwesterly wind speed, which was favorable to the dilution of pollution. Besides, the development of jet also caused the increase of vertical wind shear. As a result, the turbulence in the boundary layer became more obvious and the mixing layer height rose. Furthermore, the geostrophic vorticity at the top of mixing layer was positive at 20:00 on 17th Mar. It means that the direction of Ekman-Pumping was upward. So, the pollution near the surface was brought to upper levels and transported downstream by the jet. The development of boundary layer jet attributed to inertial oscillation and atmospheric baroclinicity.

  15. Environmentally clean slurry using nano-TiO{sub 2}-abrasive mixed with oxidizer H{sub 2}O{sub 2} for ruthenium-film chemical mechanical planarization

    Energy Technology Data Exchange (ETDEWEB)

    Cui, Hao [Department of Electronics and Communications Engineering, Hanyang University, Seoul 133-791 (Korea, Republic of); Advance Semiconductor Material and Device Development Center, Hanyang University, Seoul 133-791 (Korea, Republic of); Park, Jin-Hyung [Advance Semiconductor Material and Device Development Center, Hanyang University, Seoul 133-791 (Korea, Republic of); Park, Jea-Gun, E-mail: parkjgL@hanyang.ac.kr [Department of Electronics and Communications Engineering, Hanyang University, Seoul 133-791 (Korea, Republic of); Advance Semiconductor Material and Device Development Center, Hanyang University, Seoul 133-791 (Korea, Republic of)

    2013-10-01

    A colloidal silica-abrasive-based slurry mixed with periodate salts has been used for chemical mechanical planarization (CMP) of ruthenium (Ru) film in semiconductor-chip fabrication. This slurry has serious environmental problems such as generation of toxic RuO{sub 4} gas, corrosion, and ionic contamination. We developed an environmentally clean slurry using nano-TiO{sub 2} abrasive mixed with hydrogen peroxide (H{sub 2}O{sub 2}) for the purpose of Ru-film CMP. Moreover, this slurry is free of corrosion and ionic contamination. The polishing rates of Ru and SiO{sub 2} films with this slurry strongly depended on the H{sub 2}O{sub 2} concentration; the Ru-film polishing rate rapidly increased with H{sub 2}O{sub 2} concentration up to 1 wt% and then slightly decreased or saturated, whereas the SiO{sub 2}-film polishing rate abruptly dropped to ∼50 Å/min. In particular, the adsorbed amount of H{sub 2}O{sub 2} on nano-TiO{sub 2} abrasive directly determined the Ru-film polishing rate, indicating a new CMP mechanism of Ru film in the slurry.

  16. 2012 Clean Energy: Project Summaries

    OpenAIRE

    Asian Development Bank

    2013-01-01

    This report summarizes the investments in clean energy made by the operations departments of the Asian Development Bank (ADB) in 2012, condensing information from project databases and formal reports in an easy-to-reference format. This report was prepared by ADB’s Clean Energy Program which provides the cohesive agenda that encompasses and guides ADB’s lending and non-lending assistance, initiatives, and plan of action for sustainable growth in Asia and the Pacific.

  17. Condition and prospects of development of agricultural mechanical engineering

    Directory of Open Access Journals (Sweden)

    Vsevolod Petrovich Babushkin

    2011-12-01

    Full Text Available In this paper, an estimation of condition and level of development of agricultural mechanical engineering is given; also an expert estimation of scales of the Russian market of agricultural machinery is given. The factors negatively influencing formation of the named market are designated. Features and prospects of development of agricultural mechanical engineering of Sverdlovsk region are defined. State regulation mechanisms of domestic agricultural mechanical engineering development are designated.

  18. Temperature field modeling in laser-heated metals for laser cleaning of surfaces

    Science.gov (United States)

    Oane, Mihai; Apostol, Ileana; Timcu, Adrian

    2003-10-01

    Laser induced surface cleaning is the adequate method in a large variety of industrial domains as microelectronics, optics, photonics. By comparison to chemical and/or mechanical cleaning, laser cleaning has the advantage of a very good selectivity on the surface and in depth of the material, no surface contamination, without stress in the material volume and environmental safe. It seems that laser cleaning can be developed in a method to be currently used in microelectronic industry. For an efficient laser cleaning of metallic thin films without damage of the silicon wafer, a careful optimization of the incident laser energy, fluence, intensity and number of laser pulses is needed. We have developed an analytical procedure to study the temperature fields in pulsed laser heated solids, for a deeper knowledge of the laser-thin film substrate interaction.

  19. Mapping the Indicators. An Analysis of Sustainable Development Requirements of Selected Market Mechanisms and Multilateral Institutions

    DEFF Research Database (Denmark)

    Arens, Christof; Mersmann, Florian; Beuermann, Christiane

    produce additional outcomes on other environmental, social or economic aspects of sustainable development. The Clean Development Mechanism (CDM) was created precisely to cover these two aspects: firstly, to achieve cost-effective mitigation of greenhouse gases and secondly, to assist developing countries...... is a complex multilayer process covering environmental as well as social and economic aspects that can be affected both positively and negatively, there is a variety of possibilities of how to assess the impact an intervention may have. The high number of approaches analysed by this study reflects this......Investors are paying more and more attention to the co-benefits of climate finance. Financing activities aimed at emission mitigation must not only result in the reduction of greenhouse gas emissions, the enhancement of mitigation, adaptive capacity and adaptation strategies, but should also...

  20. Development of a laser cleaning method for the first mirror surface of the charge exchange recombination spectroscopy diagnostics on ITER

    Energy Technology Data Exchange (ETDEWEB)

    Kuznetsov, A. P., E-mail: APKuznetsov@mephi.ru [National Research Nuclear University MEPhI (Moscow Engineering Physics Institute) (Russian Federation); Buzinskij, O. I. [State Research Center Troitsk Institute for Innovation and Fusion Research (TRINITI) (Russian Federation); Gubsky, K. L.; Nikitina, E. A.; Savchenkov, A. V.; Tarasov, B. A. [National Research Nuclear University MEPhI (Moscow Engineering Physics Institute) (Russian Federation); Tugarinov, S. N. [State Research Center Troitsk Institute for Innovation and Fusion Research (TRINITI) (Russian Federation)

    2015-12-15

    A set of optical diagnostics is expected for measuring the plasma characteristics in ITER. Optical elements located inside discharge chambers are exposed to an intense radiation load, sputtering due to collisions with energetic atoms formed in the charge transfer processes, and contamination due to recondensation of materials sputtered from different parts of the construction of the chamber. Removing the films of the sputtered materials from the mirrors with the aid of pulsed laser radiation is an efficient cleaning method enabling recovery of the optical properties of the mirrors. In this work, we studied the efficiency of removal of metal oxide films by pulsed radiation of a fiber laser. Optimization of the laser cleaning conditions was carried out on samples representing metal substrates polished with optical quality with deposition of films on them imitating the chemical composition and conditions expected in ITER. It is shown that, by a proper selection of modes of radiation exposure to the surface with a deposited film, it is feasible to restore the original high reflection characteristics of optical elements.

  1. CLEAN: CLustering Enrichment ANalysis

    Directory of Open Access Journals (Sweden)

    Medvedovic Mario

    2009-07-01

    Full Text Available Abstract Background Integration of biological knowledge encoded in various lists of functionally related genes has become one of the most important aspects of analyzing genome-wide functional genomics data. In the context of cluster analysis, functional coherence of clusters established through such analyses have been used to identify biologically meaningful clusters, compare clustering algorithms and identify biological pathways associated with the biological process under investigation. Results We developed a computational framework for analytically and visually integrating knowledge-based functional categories with the cluster analysis of genomics data. The framework is based on the simple, conceptually appealing, and biologically interpretable gene-specific functional coherence score (CLEAN score. The score is derived by correlating the clustering structure as a whole with functional categories of interest. We directly demonstrate that integrating biological knowledge in this way improves the reproducibility of conclusions derived from cluster analysis. The CLEAN score differentiates between the levels of functional coherence for genes within the same cluster based on their membership in enriched functional categories. We show that this aspect results in higher reproducibility across independent datasets and produces more informative genes for distinguishing different sample types than the scores based on the traditional cluster-wide analysis. We also demonstrate the utility of the CLEAN framework in comparing clusterings produced by different algorithms. CLEAN was implemented as an add-on R package and can be downloaded at http://Clusteranalysis.org. The package integrates routines for calculating gene specific functional coherence scores and the open source interactive Java-based viewer Functional TreeView (FTreeView. Conclusion Our results indicate that using the gene-specific functional coherence score improves the reproducibility of the

  2. Clean coal - a national urgency

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, S.M.; Sahai, R. [Indian Bureau of Mines, Nagpur (India). Technical Consultancy Division

    2000-07-01

    India is the third largest producer and consumer of coal in the world. Coal generally has a high ash content, thereby requiring that it be cleaned for proper use. Technological advances now make it possible to reduce pollution considerably, even as energy use increases. However, to reduce environmental impacts, technologies for cleaning coal before combustion need to be developed. The paper focuses on the need for clean coal production and the benefits associated with it. Although the country is rich in coal reserves, the generally inferior quality of coal will lead to its depletion if it is not used cleanly. Increasing the proportion of prepared coal from the current level of less than 5% (i.e. 10-11 million tonnes per annum) of all coal consumed will lead to a massive saving. This can be achieved if new washeries are set up, preferably near the coalfields. 2 figs.

  3. Development of Mechanical Water Level Controller

    OpenAIRE

    Akonyi Nasiru Sule; Chinedu Cletus Obinwa; Christian Ebele Okekeze; Eyo Ifreke

    2012-01-01

    The automatic water level controller is a device designed to regulate automatically the pumping of water to an overhead tank without allowing the water in the tank to be exhausted. The design of this mechanical device was achieved using the Archimedes principle of floatation; having a float which determines the water level in the tank depending on the choice of the minimum (lower) and maximum (upper) level inscribed in the tank. The fundamental attribute of this device is the ease in design, ...

  4. Saltstone Clean Cap Formulation

    Energy Technology Data Exchange (ETDEWEB)

    Langton, C

    2005-04-22

    Clean Cap mix generates more bleed water than the reference Saltstone formulation because the specific gravity of water, the carrier fluid, is less than that of the carrier fluid in Saltstone, 1 versus 1.1 to 1.2, respectively. In addition, the development of slurry structure as a result of hydration reactions is slightly slower than in the salt solution slurry. In other words, the Clean Cap mix has a slightly longer gel time. The lower density of the carrier fluid and the slower development of slurry structure, enable more settling to occur (more standing water) in the Clean Cap slurry. Consequently, for the same rheological properties, the Clean Cap slurry will have more bleed water. In an attempt to reduce the bleed water, the water to premix ratio was lowered and dispersants (high range water reducers) were added. Below water to premix ratios of 0.35, little bleed water and settling was observed. However, a low water to premix Clean Cap mix is not recommended because processing has not been demonstrated in the Saltstone facility. The lowest water to premix ratio processed in Z-Area was 0.478 in the last attempt to produce a clean cap. Although this option may provide significant advantages (less bleed water and potentially better flow) process testing in the Saltstone Facility or in a pilot scale facility in conjunction with laboratory testing will be required to demonstrate mixing, pumping and flow properties. Other additives were tested to minimize bleed water. These additives were found to be unsatisfactory in one or more ways and therefore, were not recommended at this time. An air entraining agent and a thickener had some benefit in reducing bleed water but were found too difficult to implement as an additive in the Saltstone facility. Surfactants (air entrainers) added to the mixing water in the hold tank could generate foam as the result of agitation to mix the tank, and the thickener increased the apparent viscosity and yield stress.

  5. Supersonic Gas-Liquid Cleaning System

    Science.gov (United States)

    Kinney, Frank

    1996-01-01

    The Supersonic Gas-Liquid Cleaning System Research Project consisted mainly of a feasibility study, including theoretical and engineering analysis, of a proof-of-concept prototype of this particular cleaning system developed by NASA-KSC. The cleaning system utilizes gas-liquid supersonic nozzles to generate high impingement velocities at the surface of the device to be cleaned. The cleaning fluid being accelerated to these high velocities may consist of any solvent or liquid, including water. Compressed air or any inert gas is used to provide the conveying medium for the liquid, as well as substantially reduce the total amount of liquid needed to perform adequate surface cleaning and cleanliness verification. This type of aqueous cleaning system is considered to be an excellent way of conducting cleaning and cleanliness verification operations as replacements for the use of CFC 113 which must be discontinued by 1995. To utilize this particular cleaning system in various cleaning applications for both the Space Program and the commercial market, it is essential that the cleaning system, especially the supersonic nozzle, be characterized for such applications. This characterization consisted of performing theoretical and engineering analysis, identifying desirable modifications/extensions to the basic concept, evaluating effects of variations in operating parameters, and optimizing hardware design for specific applications.

  6. International Clean Energy Coalition

    Energy Technology Data Exchange (ETDEWEB)

    Erin Skootsky; Matt Gardner; Bevan Flansburgh

    2010-09-28

    In 2003, the National Association of Regulatory Utility Commissioners (NARUC) and National Energy Technology Laboratories (NETL) collaboratively established the International Clean Energy Coalition (ICEC). The coalition consisting of energy policy-makers, technologists, and financial institutions was designed to assist developing countries in forming and supporting local approaches to greenhouse gas mitigation within the energy sector. ICEC's work focused on capacity building and clean energy deployment in countries that rely heavily on fossil-based electric generation. Under ICEC, the coalition formed a steering committee consisting of NARUC members and held a series of meetings to develop and manage the workplan and define successful outcomes for the projects. ICEC identified India as a target country for their work and completed a country assessment that helped ICEC build a framework for discussion with Indian energy decisionmakers including two follow-on in-country workshops. As of the conclusion of the project in 2010, ICEC had also conducted outreach activities conducted during United Nations Framework Convention on Climate Change (UNFCCC) Ninth Conference of Parties (COP 9) and COP 10. The broad goal of this project was to develop a coalition of decision-makers, technologists, and financial institutions to assist developing countries in implementing affordable, effective and resource appropriate technology and policy strategies to mitigate greenhouse gas emissions. Project goals were met through international forums, a country assessment, and in-country workshops. This project focused on countries that rely heavily on fossil-based electric generation.

  7. Chemical-mechanical cleaning technology of ferrous sulfide in oil field equipment%油田设备中硫化亚铁的化学-机械清洗技术

    Institute of Scientific and Technical Information of China (English)

    刘新强

    2012-01-01

    A cleaning technology combined by JY -01 ferrous sulfide elimination agent and mechanical three-dimensional rotated cleaning is discussed. It can be used to solve the problem about elimination of ferrous sulfide in some equipments, such as oil storage tanks. This technology is characterized by high cleaning speed and no corrosion on equipments. The hidden trouble in safety generated by self-ignition of ferrous sulfide in the process of oil field equipment maintenance, overhaul and tank cleaning can be solved effectively by that.%介绍了一种将JY—01除硫化亚铁药剂与机械三维旋转清洗相结合的清洗技术,来解决油田储罐等设备中硫化亚铁清除的问题。该技术清洗速度快,对设备不产生腐蚀,能够有效解决油田设备维修、检修及清罐过程中硫化亚铁自燃带来的重大安全隐患。

  8. Pulmonary Edema: Classification, Mechanisms of Development, Diagnosis

    Directory of Open Access Journals (Sweden)

    V. V. Moroz

    2009-01-01

    Full Text Available Pulmonary edema remains a topical problem of modern reanimatology. In clinical practice, there is a need for continuous monitoring of the content of extravascular water in the lung and the pulmonary vascular permeability index for the timely detection and treatment of pulmonary edema. This literature review considers the minor mechanisms of pulmonary extravas-cular water exchange in health and in different types of pulmonary edema (acute lung injury, pneumonia, sepsis, postoperative period, burns, injuries etc., as well as the most accessible current (irradiation and dilution studies permitting an estimate of the level of pulmonary extravascular water and the pulmonary vascular permeability index in clinical practice. Key words: pulmonary edema, acute lung injury, pulmonary extravascular water, pulmonary vascular permeability index.

  9. Development of Mechanical Water Level Controller

    Directory of Open Access Journals (Sweden)

    Akonyi Nasiru Sule

    2012-10-01

    Full Text Available The automatic water level controller is a device designed to regulate automatically the pumping of water to an overhead tank without allowing the water in the tank to be exhausted. The design of this mechanical device was achieved using the Archimedes principle of floatation; having a float which determines the water level in the tank depending on the choice of the minimum (lower and maximum (upper level inscribed in the tank. The fundamental attribute of this device is the ease in design, fabrication and mounting at a lower cost. Its testing had shown and proved that it works efficiently with Archimedes’ principle of floatation. This eliminates the frequent human intervention/monitoring of the water level in the overhead tank to control overflow manually, thereby eliminating water and energy wastages.

  10. New catalysts for clean environment

    Energy Technology Data Exchange (ETDEWEB)

    Maijanen, A.; Hase, A. [eds.] [VTT Chemical Technology, Espoo (Finland)

    1996-12-31

    VTT launched a Research Programme on Chemical Reaction Mechanisms (CREAM) in 1993. The three-year programme (1993-1995) has focused on reaction mechanisms relevant to process industries and aimed at developing novel catalysts and biocatalysts for forest, food, and specialty chemicals industries as well as for energy production. The preliminary results of this programme have already been presented in the first symposium organized in Espoo in September 1994. To conclude the programme the second symposium is organized in Otaniemi, Espoo on January 29 - 30, 1996. Papers by 19 speakers and 17 poster presentations of the 1996 Symposium are included in this book. The Symposium consists of four sessions: Biotechnology for Natural Fibers Processing, New Biocatalysts, Catalysts for Clean Energy, and New Opportunities for Chemical Industry. The CREAM programme has tried to foresee solutions for the problems challenged by the public concern on environmental aspects, especially dealing with industrial processes and novel use of raw materials and energy. The programme has followed the basic routes that can lead to natural and simple solutions to develop processes in the fields of forest, food fine chemicals, and energy industry. This symposium presents the results of the programme to learn and further discuss together with the international experts that have been invited as keynote speakers. (author)

  11. Development of sample preparation method for auxin analysis in plants by vacuum microwave-assisted extraction combined with molecularly imprinted clean-up procedure.

    Science.gov (United States)

    Hu, Yuling; Li, Yuanwen; Zhang, Yi; Li, Gongke; Chen, Yueqin

    2011-04-01

    A novel sample preparation method for auxin analysis in plant samples was developed by vacuum microwave-assisted extraction (VMAE) followed by molecularly imprinted clean-up procedure. The method was based on two steps. In the first one, conventional solvent extraction was replaced by VMAE for extraction of auxins from plant tissues. This step provided efficient extraction of 3-indole acetic acid (IAA) from plant with dramatically decreased extraction time, furthermore prevented auxins from degradation by creating a reduced oxygen environment under vacuum condition. In the second step, the raw extract of VMAE was further subjected to a clean-up procedure by magnetic molecularly imprinted polymer (MIP) beads. Owing to the high molecular recognition ability of the magnetic MIP beads for IAA and 3-indole-butyric acid (IBA), the two target auxins in plants can be selectively enriched and the interfering substance can be eliminated by dealing with a magnetic separation procedure. Both the VMAE and the molecularly imprinted clean-up conditions were investigated. The proposed sample preparation method was coupled with high-performance liquid chromatogram and fluorescence detection for determination of IAA and IBA in peas and rice. The detection limits obtained for IAA and IBA were 0.47 and 1.6 ng/mL and the relative standard deviation were 2.3% and 2.1%, respectively. The IAA contents in pea seeds, pea embryo, pea roots and rice seeds were determined. The recoveries were ranged from 70.0% to 85.6%. The proposed method was also applied to investigate the developmental profiles of IAA concentration in pea seeds and rice seeds during seed germination.

  12. Climate protection and development aid by technology transfer. Clean development mechanism enables advanced energy technology for China; Klimaschutz und Entwicklungshilfe durch Technologietransfer. Clean Development Mechanism ermoeglicht neue Energietechnologie fuer China

    Energy Technology Data Exchange (ETDEWEB)

    Jasper, J.; Serger, H. [Hannover Univ. (Germany). Lehrstuhl fuer Mikrooekonomik

    2005-07-01

    Enlightened is the problem of climate change from an economical point of view by the Institute of Microeconomics of the EconomicScientific Faculty of the Hannover University and the Institute of Global Issues of the Nankai Unviversity at Tianjin in China. In special the aspect of Carbon Dioxide reduction is focussed. (GL)

  13. The role of mechanics during brain development

    Science.gov (United States)

    Budday, Silvia; Steinmann, Paul; Kuhl, Ellen

    2014-12-01

    Convolutions are a classical hallmark of most mammalian brains. Brain surface morphology is often associated with intelligence and closely correlated with neurological dysfunction. Yet, we know surprisingly little about the underlying mechanisms of cortical folding. Here we identify the role of the key anatomic players during the folding process: cortical thickness, stiffness, and growth. To establish estimates for the critical time, pressure, and the wavelength at the onset of folding, we derive an analytical model using the Föppl-von Kármán theory. Analytical modeling provides a quick first insight into the critical conditions at the onset of folding, yet it fails to predict the evolution of complex instability patterns in the post-critical regime. To predict realistic surface morphologies, we establish a computational model using the continuum theory of finite growth. Computational modeling not only confirms our analytical estimates, but is also capable of predicting the formation of complex surface morphologies with asymmetric patterns and secondary folds. Taken together, our analytical and computational models explain why larger mammalian brains tend to be more convoluted than smaller brains. Both models provide mechanistic interpretations of the classical malformations of lissencephaly and polymicrogyria. Understanding the process of cortical folding in the mammalian brain has direct implications on the diagnostics of neurological disorders including severe retardation, epilepsy, schizophrenia, and autism.

  14. Biomolecular mechanisms in varicose veins development.

    Science.gov (United States)

    Segiet, Oliwia Anna; Brzozowa-Zasada, Marlena; Piecuch, Adam; Dudek, Damian; Reichman-Warmusz, Edyta; Wojnicz, Romuald

    2015-02-01

    Varicose veins (VVs) can be described as tortuous and dilated palpable veins, which are more than 3 mm in diameter. They are one of the clinical presentations of chronic venous disorders, which are a significant cause of morbidity. The prevalence of VVs has been estimated at 25-33% in women and 10-20% in men and is still increasing at an alarming rate. Family history, older age, female, pregnancy, obesity, standing occupations, and a history of deep venous thrombosis are the predominant risk factors. A great amount of factors are implicated in the pathogenesis of VVs, including changes in hydrostatic pressure, valvular incompetence, deep venous obstruction, ineffective function of calf muscle pump, biochemical and structural alterations of the vessel wall, extracellular matrix abnormalities, impaired balance between growth factors or cytokines, genetic alterations, and several other mechanisms. Nevertheless, the issue of pathogenesis in VVs is still not completely known, even if a great progress has been made in understanding their molecular basis. This kind of studies appears promising and should be encouraged, and perhaps the new insight in this matter may result in targeted therapy or possibly prevention.

  15. The role of mechanics during brain development.

    Science.gov (United States)

    Budday, Silvia; Steinmann, Paul; Kuhl, Ellen

    2014-12-01

    Convolutions are a classical hallmark of most mammalian brains. Brain surface morphology is often associated with intelligence and closely correlated to neurological dysfunction. Yet, we know surprisingly little about the underlying mechanisms of cortical folding. Here we identify the role of the key anatomic players during the folding process: cortical thickness, stiffness, and growth. To establish estimates for the critical time, pressure, and the wavelength at the onset of folding, we derive an analytical model using the Föppl-von-Kármán theory. Analytical modeling provides a quick first insight into the critical conditions at the onset of folding, yet it fails to predict the evolution of complex instability patterns in the post-critical regime. To predict realistic surface morphologies, we establish a computational model using the continuum theory of finite growth. Computational modeling not only confirms our analytical estimates, but is also capable of predicting the formation of complex surface morphologies with asymmetric patterns and secondary folds. Taken together, our analytical and computational models explain why larger mammalian brains tend to be more convoluted than smaller brains. Both models provide mechanistic interpretations of the classical malformations of lissencephaly and polymicrogyria. Understanding the process of cortical folding in the mammalian brain has direct implications on the diagnostics of neurological disorders including severe retardation, epilepsy, schizophrenia, and autism.

  16. Laser cleaning of tungsten ribbon

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, Aniruddha, E-mail: nontee65@rediffmail.com [Advanced Fuel Fabrication Facility, Bhabha Atomic Research Centre, Tarapur, Maharashtra, 401504 (India); Sonar, V.R.; Das, D.K.; Bhatt, R.B.; Behere, P.G.; Afzal, Mohd.; Kumar, Arun [Advanced Fuel Fabrication Facility, Bhabha Atomic Research Centre, Tarapur, Maharashtra, 401504 (India); Nilaya, J.P.; Biswas, D.J. [Laser and Plasma Technology Division, Bhabha Atomic Research Centre, Trombay, 400085 (India)

    2014-07-01

    Removal of a thin oxide layer from a tungsten ribbon was achieved using the fundamental, second and third harmonic radiation from a Q- switched Nd-YAG laser. It was found that beyond the threshold, oxide removal was achieved at all wavelengths for a wide range of fluence values. The removal mechanism of the oxide layer was found to be critically dependent on both wavelength and fluence of the incident radiation and has been identified as ejection or sublimation. The un-cleaned and cleaned surfaces were analyzed by scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDS) and atomic force microscopy (AFM). Laser cleaned tungsten ribbons were used in a thermal ionization mass spectrometer (TIMS) to determine isotopic composition of Neodymium atoms.

  17. Mechanisms of stomatal development: an evolutionary view

    Directory of Open Access Journals (Sweden)

    Vatén Anne

    2012-07-01

    Full Text Available Abstract Plant development has a significant postembryonic phase that is guided heavily by interactions between the plant and the outside environment. This interplay is particularly evident in the development, pattern and function of stomata, epidermal pores on the aerial surfaces of land plants. Stomata have been found in fossils dating from more than 400 million years ago. Strikingly, the morphology of the individual stomatal complex is largely unchanged, but the sizes, numbers and arrangements of stomata and their surrounding cells have diversified tremendously. In many plants, stomata arise from specialized and transient stem-cell like compartments on the leaf. Studies in the flowering plant Arabidopsis thaliana have established a basic molecular framework for the acquisition of cell fate and generation of cell polarity in these compartments, as well as describing some of the key signals and receptors required to produce stomata in organized patterns and in environmentally optimized numbers. Here we present parallel analyses of stomatal developmental pathways at morphological and molecular levels and describe the innovations made by particular clades of plants.

  18. Process development studies on recovery of clean coal from ultra fine hardcoal tailings using enhanced gravity separator

    Energy Technology Data Exchange (ETDEWEB)

    Ozgen, S.; Turksoy, V.O.; Sabah, E.; Oruc, F. [Afyon Kocatepe Univ., Afyonkarahisar (Turkey). Dept. of Mining Engineering

    2009-10-15

    Gravity-based processing methods were used to process and recover clean coal from ultra-fine hardcoal tailings at a site in Turkey. The coal samples were analyzed using X-ray diffraction and X-ray fluorescence. A hydrocyclone was used to conduct classification tests and to separate the clay minerals from the coal. The effects of various operating parameters were also investigated. Regression analysis was used to characterize the relationship between the ash content and coal recovery rate and the feed solid, inlet pressure, diameter of vortex, and diameter of apex variables of the hydrocyclone. The effects of feed pressure were also investigated. The study showed that coal can be economically recovered from hardcoal tailings containing clay minerals. It was concluded that a coal sample with 6.98 per cent ash content and a net calorific value of 28,778 kJ was obtained with a weight recovery of 61.73 per cent. 25 refs., 8 tabs., 18 figs.

  19. Behavior-based cleaning for unreliable RFID data sets.

    Science.gov (United States)

    Fan, Hua; Wu, Quanyuan; Lin, Yisong

    2012-01-01

    Radio Frequency IDentification (RFID) technology promises to revolutionize the way we track items and assets, but in RFID systems, missreading is a common phenomenon and it poses an enormous challenge to RFID data management, so accurate data cleaning becomes an essential task for the successful deployment of systems. In this paper, we present the design and development of a RFID data cleaning system, the first declarative, behavior-based unreliable RFID data smoothing system. We take advantage of kinematic characteristics of tags to assist in RFID data cleaning. In order to establish the conversion relationship between RFID data and kinematic parameters of the tags, we propose a movement behavior detection model. Moreover, a Reverse Order Filling Mechanism is proposed to ensure a more complete access to get the movement behavior characteristics of tag. Finally, we validate our solution with a common RFID application and demonstrate the advantages of our approach through extensive simulations.

  20. Santilli's new fuels as sources of clean combustion

    Science.gov (United States)

    Sarma, Indrani B. Das

    2013-10-01

    Molecular combustion or nuclear fission is the conventional source of energy, which are not clean as they generate large amount of green house gas or nuclear waste. Clean energy can be obtained by harnessing renewable energy sources like solar, wind, etc. However, each of these sources has their own limitations and is dependent on geographical locations. The modern day demand of clean, cheap and abundant energy gets fulfilled by the novel fuels that have been developed through hadronic mechanics/chemistry. In the present paper, a short review on such novel fuels like Hadronic energy of non-nuclear type (combustion of MagneGas) and nuclear type (intermediate controlled nuclear fusion and particle type like stimulated neutron decay) has been presented.

  1. Self-regulatory mechanisms governing gender development.

    Science.gov (United States)

    Bussey, K; Bandura, A

    1992-10-01

    This study tested predictions about development of gender-related thought and action from social cognitive theory. Children at 4 levels of gender constancy were assessed for their gender knowledge, personal gender standards, and gender-linked behavior under different situational conditions. Irrespective of gender constancy level, all children engaged in more same-sex than cross-sex typed behavior. Younger children reacted in a gender stereotypic manner to peers' gender-linked behavior but did not regulate their own behavior on the basis of personal gender standards. Older children exhibited substantial self-regulatory guidance based on personal standards. They expressed anticipatory self-approval for same-sex typed behavior and self-criticism for cross-sex typed behavior. Their anticipatory self-sanctions, in turn, predicted their actual gender-linked behavior. Neither gender knowledge nor gender constancy predicted gender-linked behavior. These results lend support to social cognitive theory that evaluation and regulation of gender-linked conduct shifts developmentally from anticipatory social sanctions to anticipatory self-sanctions rooted in personal standards.

  2. Understanding the mechanism of base development of HSQ

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jihoon; Chao, Weilun; Griedel, Brian; Liang, Xiaogan; Lewis, Mark; Hilken, Dawn; Olynick, Deirdre

    2009-06-16

    We study the dissolution mechanism of HSQ (hydrogen silsesquioxane) in base solutions with the addition of chloride salts to elucidate the development mechanism. Reaction mechanisms are proposed based on the dissolution mechanism of quartz. Development kinetics points to two dose-dependent development mechanisms. Considering ion sizes, both hydrated and non-hydrated, and ion exchange, we propose that a combination of a surface dominated reaction at higher doses and a matrix dominated reaction at lower doses accounts for the high development contrast with a NaOH base/NaCl salt mixture. The interplay between the hydrated and non-hydrated ion size leads to higher contrast developers, such as tetramethyl ammonium hydroxide (TMAH) with NaCl.

  3. An automated cleaning system for hospitals

    OpenAIRE

    Griffin, Colin

    2009-01-01

    Insufficient hygienic practices in Irish hospitals coupled with one of the highest number of reported cases of MRSA in Europe have highlighted the need for solutions to aid in the task of cleaning. This automated cleaning system consisted of two robots: a core robot developed separately with navigational and task scheduling capabilities integrated. The cleaning task was carried out by making use of a commercially available Roomba vacuum cleaner which had been adapted to operate in conju...

  4. Engineering development of advanced physical fine coal cleaning technologies: Froth flotation. Quarterly technical progress report No. 16, July 1, 1992--September 30, 1992

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-31

    A study conducted by Pittsburgh Energy Technology Center of sulfur emissions from about 1,300 United States coal-fired utility boilers indicated that half of the emissions were the result of burning coals having greater than 1.2 pounds of SO{sub 2} per million BTU. This was mainly attributed to the high pyritic sulfur content of the boiler fuel. A significant reduction in SO{sub 2} emissions could be accomplished by removing the pyrite from the coals by advanced physical fine coal cleaning. An engineering development project was prepared to build upon the basic research effort conducted under a solicitation for research into Fine Coal Surface Control. The engineering development project is intended to use general plant design knowledge and conceptualize a plant to utilize advanced froth flotation technology to process coal and produce a product having maximum practical pyritic sulfur reduction consistent with maximum practical BTU recovery.

  5. DEVELOPMENT OF PERMANENT MECHANICAL REPAIR SLEEVE FOR PLASTIC PIPE

    Energy Technology Data Exchange (ETDEWEB)

    Hitesh Patadia

    2004-09-30

    The report presents a comprehensive summary of the project status related to the development of a permanent mechanical repair fitting intended to be installed on damaged PE mains under blowing gas conditions. Specifically, the product definition has been developed taking into account relevant codes and standards and industry input. A conceptual design for the mechanical repair sleeve has been developed which meets the product definition.

  6. National Clean Fleets Partnership (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2012-01-01

    Provides an overview of Clean Cities National Clean Fleets Partnership (NCFP). The NCFP is open to large private-sector companies that have fleet operations in multiple states. Companies that join the partnership receive customized assistance to reduce petroleum use through increased efficiency and use of alternative fuels. This initiative provides fleets with specialized resources, expertise, and support to successfully incorporate alternative fuels and fuel-saving measures into their operations. The National Clean Fleets Partnership builds on the established success of DOE's Clean Cities program, which reduces petroleum consumption at the community level through a nationwide network of coalitions that work with local stakeholders. Developed with input from fleet managers, industry representatives, and Clean Cities coordinators, the National Clean Fleets Partnership goes one step further by working with large private-sector fleets.

  7. Effectiveness of granite cleaning procedures in cultural heritage: A review.

    Science.gov (United States)

    Pozo-Antonio, J S; Rivas, T; López, A J; Fiorucci, M P; Ramil, A

    2016-11-15

    Most of the Cultural Heritage built in NW Iberian Peninsula is made of granite which exposition to the environment leads to the formation of deposits and coatings, mainly two types: biological colonization and sulphated black crusts. Nowadays, another form of alteration derives from graffiti paints when these are applied as an act of vandalism. A deep revision needs to be addressed considering the severity of these deterioration forms on granite and the different cleaning effectiveness achieved by cleaning procedures used to remove them. The scientific literature about these topics on granite is scarcer than on sedimentary carbonate stones and marbles, but the importance of the granite in NW Iberian Peninsula Cultural Heritage claims this review centred on biological colonization, sulphated black crusts and graffiti on granite and their effectiveness of the common cleaning procedures. Furthermore, this paper carried out a review of the knowledge about those three alteration forms on granite, as well as bringing together all the major studies in the field of the granite cleaning with traditional procedures (chemical and mechanical) and with the recent developed technique based on the laser ablation. Findings concerning the effectiveness evaluation of these cleaning procedures, considering the coating extraction ability and the damage induced on the granite surface, are described. Finally, some futures research lines are pointed out.

  8. Clean Coal Diesel Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Robert Wilson

    2006-10-31

    A Clean Coal Diesel project was undertaken to demonstrate a new Clean Coal Technology that offers technical, economic and environmental advantages over conventional power generating methods. This innovative technology (developed to the prototype stage in an earlier DOE project completed in 1992) enables utilization of pre-processed clean coal fuel in large-bore, medium-speed, diesel engines. The diesel engines are conventional modern engines in many respects, except they are specially fitted with hardened parts to be compatible with the traces of abrasive ash in the coal-slurry fuel. Industrial and Municipal power generating applications in the 10 to 100 megawatt size range are the target applications. There are hundreds of such reciprocating engine power-plants operating throughout the world today on natural gas and/or heavy fuel oil.

  9. Coalbed methane: Clean energy for the world

    Science.gov (United States)

    Ahmed, A.-J.; Johnston, S.; Boyer, C.; Lambert, S.W.; Bustos, O.A.; Pashin, J.C.; Wray, A.

    2009-01-01

    Coalbed methane (CBM) has the potential to emerge as a significant clean energy resource. It also has the potential to replace other diminishing hydrocarbon reserves. The latest developments in technologies and methodologies are playing a key role in harnessing this unconventional resource. Some of these developments include adaptations of existing technologies used in conventional oil and gas generations, while others include new applications designed specifically to address coal's unique properties. Completion techniques have been developed that cause less damage to the production mechanisms of coal seams, such as those occurring during cementing operations. Stimulation fluids have also been engineered specifically to enhance CBM production. Deep coal deposits that remain inaccessible by conventional mining operations offer CBM development opportunities.

  10. Wanted: Clean Coal Burning Technology

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    China is intent on developing clean coal burning technology, an objective it can achieve through installing desulfurization facilities at coal-burning power plants that will control SO2 emissions and environmental pollution. According to kuo Yi, deputy director general of the Department of Science and Technology of the State Environmental Protection Agency, China is a major coal-buming country:

  11. Partnership for a Clean Future

    Institute of Scientific and Technical Information of China (English)

    WANG HAIRONG

    2010-01-01

    @@ Having lived in China for almost three decades,Sabina Brady is a de facto China hand.Currently,she is the cxecutive director of the U.S.-China Energy Cooperation Program (ECP),a nonprofit organization that engages in market development and promotion of clean energy within the framework of China-U.S.bilateral government commitments on the environrnent and energy.

  12. Pedagogic Approach to the Mechanisms of Personality Identity Development

    Science.gov (United States)

    Shakurova, Marina V.

    2016-01-01

    The article addresses the problem of defining and attributing pedagogic essence to the mechanisms of personality identity development. It is based on the general mechanism of social interaction. Its structure contains, on the one hand, pedagogic interaction, including the forms of pedagogic assistance and pedagogic support; on the other hand, it…

  13. A Mechanism for Gratitude Development in a Child

    Science.gov (United States)

    Li, Shi

    2016-01-01

    Most scholars consider gratitude as a moral emotion, with only few seeing it as a character trait. As a result, no systematic mechanism has ever been attempted to develop gratitude in children. Given the social issue of widespread lack of gratitude in the one-child generations of China, this article attempts to outline a mechanism of parental…

  14. Developing and Evaluating Animations for Teaching Quantum Mechanics Concepts

    Science.gov (United States)

    Kohnle, Antje; Douglass, Margaret; Edwards, Tom J.; Gillies, Alastair D.; Hooley, Christopher A.; Sinclair, Bruce D.

    2010-01-01

    In this paper, we describe animations and animated visualizations for introductory and intermediate-level quantum mechanics instruction developed at the University of St Andrews. The animations aim to help students build mental representations of quantum mechanics concepts. They focus on known areas of student difficulty and misconceptions by…

  15. A Study of the Development of Agricultural Mechanization in Kunming

    Institute of Scientific and Technical Information of China (English)

    Wangyun; NING; Yulan; KUANG; Yonghua; ZHANG

    2013-01-01

    Kunming City has entered the rapid development stage of urbanization. In the course of building the urban modern agriculture, the agricultural mechanization of Kunming City is being faced with excellent development opportunity. In this paper, the author scientifically analyzed current development situations of agricultural mechanization in Kunming City and explored existing problems in the course of development. On the basis of analysis, the author put forward recommendations, including increasing scientific research input for agricultural machinery, supporting agricultural machinery enterprises, promoting scientific and technical innovation, taking characteristic industries (such as flowers and vegetables) as pillar industry, speeding up development of modern facility agriculture, and upgrading primary processing of agricultural products. These will play significant role in the development of agricultural mechanization in Kunming City.

  16. Development of a simple extraction and clean-up procedure for determination of organochlorine pesticides in soil using gas chromatography-tandem mass spectrometry.

    Science.gov (United States)

    Rashid, A; Nawaz, S; Barker, H; Ahmad, I; Ashraf, M

    2010-04-23

    A procedure based on QuEChERS extraction and a simultaneous liquid-liquid partition clean-up was developed. The procedure involved extraction of hydrated soil samples using acetonitrile and clean-up by liquid-liquid partition into n-hexane. The hexane extracts produced were clean and suitable for determination using gas chromatography-tandem mass spectrometry (GC-MS/MS). The method was validated by analysis of soil samples, spiked at five levels between 1 and 200 microg kg(-1). The recovery values were generally between 70 and 100% and the relative standard deviation values (%RSDs) were at or below 20%. The procedure was validated for determination of 19 organochlorine (OC) pesticides. These were hexachlorobenzene (HCB), alpha-HCH, beta-HCH, gamma-HCH, heptachlor, heptachlor epoxide (trans), aldrin, dieldrin, chlordane (trans), chlordane (cis), oxychlordane, alpha-endosulfan, beta-endosulfan, endosulfan sulfate, endrin, p,p'-DDT, o,p'-DDT, p,p'-DDD and p,p'-DDE. The method achieved low limits of detection (LOD; typically 0.3 microg kg(-1)) and low limits of quantification (LOQ; typically 1.0 microg kg(-1)). The method performance was also assessed using five fortified soil samples with different physico-chemical properties and the method performance was consistent for the different types of soil samples. The proposed method was compared with an established procedure based on Soxtec extraction. This comparison was carried out using six soil samples collected from regions of Pakistan with a history of intensive pesticide use. The results of this comparison showed that the two procedures produced results with good agreement. The proposed method produced cleaner extracts and therefore led to lower limits of quantification. The proposed method was less time consuming and safer to use. The six samples tested during this comparison showed that soils from cotton growing regions contained a number of persistent OC residues at relatively low levels (<10 microg kg(-1)). These

  17. Planning Mechanisms for Regional Electric Power Supply System Development

    Directory of Open Access Journals (Sweden)

    Evgeniy Anatolyevich Malyshev

    2015-12-01

    Full Text Available Key problems of the regional electric power supply systems are examined. These problems result from a lack of regulated interaction mechanisms for uniting the different entities’ resources aimed at the realization of investment activities. One of the main problems of the power supply industry is physical and moral aging of both generating and networking equipment. In the article, the necessity of management system formation to control the development of power sector has been proved. The deficiencies of the modern investment procedure in power companies are described. The absence of continuity between the regional and local strategic planning documents and investment planning of a power company has been found out. The possibility to develop a new mechanism for attracting investment has been proposed. The regulation of joint activities to implement the development program for the regional power supply industry has been proposed. The management system to develop the Russian power industry has been proposed. The comparative analysis of generating capacity development mechanisms has been carried out, such as capacity supply agreement (CSA, investment support mechanism (ISM, and long-term power market (LPM. The interaction procedure of the planning of the power supply infrastructure development has been described. The mechanism connecting the state sectoral and regional planning and corporate planning of power supply infrastructure development has been proposed. The regional aspects of industrial policy and its legislative support have been considered. To successfully implement the public-private-partnership (PPP projects, it is necessary to create the effective PPP model within the federal and regional legislation framework; to develop the financial model providing the recoverability of investments; to provide a mutually beneficial cooperation between executive bodies and private investors. The possibility to apply the PPP mechanism for regional

  18. Cleaning and surface properties

    CERN Document Server

    Taborelli, M

    2007-01-01

    Principles of precision cleaning for ultra high vacuum applications are reviewed together with the techniques for the evaluation of surface cleanliness. Methods to verify the effectiveness of cleaning procedures are discussed. Examples are presented to illustrate the influence of packaging and storage on the recontamination of the surface after cleaning. Finally, the effect of contamination on some relevant surface properties, like secondary electron emission and wettability is presented.

  19. Development and Commercialization of an Ideal Mechanical Wound Therapy System

    Science.gov (United States)

    2015-12-01

    AD______________ AWARD NUMBER: W81XWH-14-C-0095 TITLE: Development & Commercialization of an Ideal Mechanical Wound Therapy System PRINCIPAL...2015 4. TITLE AND SUBTITLE Development & Commercialization of an Ideal Mechanical Wound Therapy System 5a. CONTRACT NUMBER 5b. GRANT NUMBER W81XWH...growth and other adverse events related to non- ideal COTS wound filler. This project had 2 primary phases. In the initial phase, design work and

  20. Ultrasound cleaning of microfilters

    DEFF Research Database (Denmark)

    Hald, Jens; Bjørnø, Irina; Jensen, Leif Bjørnø

    1999-01-01

    The aim of the present work is to develop, design, and manufacture a high-power ultrasound transducer module to be used for preventing the blocking of plastic-based microfilters by organic materials, and possibly to prolong the lifetime of the filters in industry using the cavitation on the surface...... suitable for cleaning of microfilters without damaging the filter structure. The filter surface was studied using an optical microscope before and after the experiment. When high-power ultrasound (max. 75 W/cm2) was applied to the surface of some microfilters, no visible damage was found, while others...... filters were damaged. The results of the laboratory experiments formed background for the final design of an ultrasound transducer module for use by foodstuff filtration plants. [This work was financed by the EU Project WAMBIO PL96-3257 (FAIR Programme).]...

  1. Quick and clean cloning.

    Science.gov (United States)

    Thieme, Frank; Marillonnet, Sylvestre

    2014-01-01

    Identification of unknown sequences that flank known sequences of interest requires PCR amplification of DNA fragments that contain the junction between the known and unknown flanking sequences. Since amplified products often contain a mixture of specific and nonspecific products, the quick and clean (QC) cloning procedure was developed to clone specific products only. QC cloning is a ligation-independent cloning procedure that relies on the exonuclease activity of T4 DNA polymerase to generate single-stranded extensions at the ends of the vector and insert. A specific feature of QC cloning is the use of vectors that contain a sequence called catching sequence that allows cloning specific products only. QC cloning is performed by a one-pot incubation of insert and vector in the presence of T4 DNA polymerase at room temperature for 10 min followed by direct transformation of the incubation mix in chemo-competent Escherichia coli cells.

  2. Laser cleaning on Roman coins

    Science.gov (United States)

    Drakaki, E.; Karydas, A. G.; Klinkenberg, B.; Kokkoris, M.; Serafetinides, A. A.; Stavrou, E.; Vlastou, R.; Zarkadas, C.

    Ancient metal objects react with moisture and environmental chemicals to form various corrosion products. Because of the unique character and high value of such objects, any cleaning procedure should guarantee minimum destructiveness. The most common treatment used is mechanical stripping, in which it is difficult to avoid surface damage when employed. Lasers are currently being tested for a wide range of conservation applications. Since they are highly controllable and can be selectively applied, lasers can be used to achieve more effective and safer cleaning of archaeological artifacts and protect their surface details. The basic criterion that motivated us to use lasers to clean Roman coins was the requirement of pulsed emission, in order to minimize heat-induced damages. In fact, the laser interaction with the coins has to be short enough, to produce a fast removal of the encrustation, avoiding heat conduction into the substrate. The cleaning effects of three lasers operating at different wavelengths, namely a TEA CO2 laser emitting at 10.6 μm, an Er:YAG laser at 2.94 μm, and a 2ω-Nd:YAG laser at 532 nm have been compared on corroded Romans coins and various atomic and nuclear techniques have also been applied to evaluate the efficiency of the applied procedure.

  3. The mechanics of development: models and methods for tissue morphogenesis

    Science.gov (United States)

    Gjorevski, Nikolce; Nelson, Celeste M.

    2011-01-01

    Embryonic development is a physical process during which masses of cells are sculpted into functional organs. The mechanical properties of tissues and the forces exerted on them serve as epigenetic regulators of morphogenesis. Understanding these mechanobiological effects in the embryo requires new experimental approaches. Here we focus on branching of the lung airways and bending of the heart tube to describe examples of mechanical and physical cues that guide cell fate decisions and organogenesis. We highlight recent technological advances to measure tissue elasticity and endogenous mechanical stresses in real time during organ development. We also discuss recent progress in manipulating forces in intact embryos. PMID:20860059

  4. Experimental study on energy performance of clean air heat pump

    DEFF Research Database (Denmark)

    Fang, Lei; Nie, Jinzhe; Olesen, Bjarne W.

    2014-01-01

    An innovative clean air heat pump (CAHP) was designed and developed based on the air purification capacity of regenerative silica gel rotor. The clean air heat pump integrated air purification, dehumidification and cooling in one unit. A prototype of the clean air heat pump was developed...

  5. ADB-aided Projects to Expand Clean Energy Application in China

    Institute of Scientific and Technical Information of China (English)

    Wu Baoguo

    2002-01-01

    @@ On October 14, China's Ministry of Science and Technology and Asian Development Bank jointly launched a project called "Opportunity for Clean Development Mechanism of Energy Departments"across the country, which is an ABD-aided project aiming at providing China's energy departments with the technical guide to the projects suitable for the Chinese conditions.

  6. Clean Production of Steel and Refractories in China's Steel Industry

    Institute of Scientific and Technical Information of China (English)

    SU Tiansen

    2002-01-01

    The paper describes the importance of clean production of steel and the relationships amongst sustaining development of steel industry, environment protection and the role of refractories in the clean production of steel. The main achievements and main shortcomings in the clean production of China' s steel industry have been reviewed together with the introduction of the policy supporting system and the future development of clean production in China' s steel industry.

  7. Energy resources integrated planning as instrument for clean development; Planejamento integrado de recursos energeticos como instrumento de desenvolvimento limpo

    Energy Technology Data Exchange (ETDEWEB)

    Galvao, Luis Claudio Ribeiro; Kanayama, Paulo Helio [Universidade de Sao Paulo (EPUSP), SP (Brazil). Escola Politecnica; Grimoni, Jose Aquiles Baeso; Udaeta, Miguel Edgar Morales [Universidade de Sao Paulo (IEE/USP), SP (Brazil). Inst. de Eletrotecnica e Energia

    2008-07-01

    This paper presents the RIP - Resources Integrated Planning, viewing the sustainable development. In the RIP the regional energy resource utilization are a prioritization and the regional economic talent is viewing as a competitive advantage for improvement of the social indexes, and the environmental limitations are considered, including the effects of global heating. Also, the political forces are respected, the involved and interested participates in the planning, and the most important the systemic approaching for obtaining the sustainable, rational and efficient use of the energy are obtained in advance which allows to predict the development consequences before the implantation of projects.

  8. Child Care Subsidy Use and Child Development: Potential Causal Mechanisms

    Science.gov (United States)

    Hawkinson, Laura E.

    2011-01-01

    Research using an experimental design is needed to provide firm causal evidence on the impacts of child care subsidy use on child development, and on underlying causal mechanisms since subsidies can affect child development only indirectly via changes they cause in children's early experiences. However, before costly experimental research is…

  9. The Development of Ultrasonic Cleaning Machine for Metal Partsof Automobile Shock Absorber%汽车减震器金属零件的自动超声清洗机研制

    Institute of Scientific and Technical Information of China (English)

    喻永康; 奚敏

    2016-01-01

    应用超声波清洗的原理,为某汽车减震器零件生产企业研制了三槽超声波清洗机。清洗机主要由高压水喷淋清洗槽、超声波清洗槽和快速风干槽3部分组成,清洗机能够对金属零件进行快速高效的清洗。清洗在水中完成,并设计了水循环使用结构,很大程度降低了水资源的使用。采用 PLC和触摸屏实现自动控制,性能稳定,人工成本和工人的劳动强度有了大幅下降,而清洗效率得到大幅提高。%Applying the principles of ultrasonic cleaning,an ultrasonic cleaning machine was developed for one metal parts of automobile shock absorber.The equipment composed of high pressure spray cleaning trough,ultra-sonic cleaning tank and wind dry chamfer cutter,allowing for fast and efficient cleaning.Cleaning is conducted in water,and a cyclic use structure of water is designed,thus substantially decreases the use of water resources.PLC and touch screen is used and the performance is very reliable.This design reduces labor costs and labor intensity, as well as improving the cleaning efficiency.

  10. Systematic Contradiction Between Heritage Conservation and Tourism Development: Cleaning the Temple and Cemetery of Confucius and the Kong Family Mansion in Qufu

    Institute of Scientific and Technical Information of China (English)

    Wang Degang; Sun Wanzhen

    2007-01-01

    In recent years, with the rapid development of the tourist industry, world heritage sites become more and more popular among tourists from home and abroad. Therefore, heritage tourism has become a new hotspot. However, while world heritage sites are making obvious economic benefit from tourism,they also bring various problems and contradictions, of which the most troublesome one is the contradiction between heritage conservation and tourism development. To discuss and analyze the root and the essence of the above contradiction and find a way to bring about harmony between them is an important program faced by our national heritage management practice and academic research. Based on the case of cleaning the Temple and Cemetery of Confucius and the Kong Family Mansion in Qufu, this paper analyzes the reasons why our national world cultural heritage sites bring about the above contradiction in the process of tourism development and points out that the improper system and stakeholders' benefit imbroglio are respectively the root and the essence of the contraction. Then, it also puts forward corresponding solutions.

  11. Dynamic Mechanism for Development of Urban and Rural Spatial Integration

    Institute of Scientific and Technical Information of China (English)

    Lufeng; DUAN

    2014-01-01

    The space is a place where human beings conduct social and economic activities,and also the carrier of any public living form and right action. Urban area and rural area are two integral parts of regional economic system. Without joint and coordinated development of urban and rural areas,it is impossible to realize global optimization of economy and maximization of social welfare. Through study of dynamic mechanism for development of urban and rural spatial integration,it is expected to understand laws,mechanism and means of urban and rural spatial structure evolution,so as to better promote sustainable development of urban and rural population,resources and environment.

  12. An NMDA Receptor-Dependent Mechanism Underlies Inhibitory Synapse Development

    Directory of Open Access Journals (Sweden)

    Xinglong Gu

    2016-01-01

    Full Text Available In the mammalian brain, GABAergic synaptic transmission provides inhibitory balance to glutamatergic excitatory drive and controls neuronal output. The molecular mechanisms underlying the development of GABAergic synapses remain largely unclear. Here, we report that NMDA-type ionotropic glutamate receptors (NMDARs in individual immature neurons are the upstream signaling molecules essential for GABAergic synapse development, which requires signaling via Calmodulin binding motif in the C0 domain of the NMDAR GluN1 subunit. Interestingly, in neurons lacking NMDARs, whereas GABAergic synaptic transmission is strongly reduced, the tonic inhibition mediated by extrasynaptic GABAA receptors is increased, suggesting a compensatory mechanism for the lack of synaptic inhibition. These results demonstrate a crucial role for NMDARs in specifying the development of inhibitory synapses, and suggest an important mechanism for controlling the establishment of the balance between synaptic excitation and inhibition in the developing brain.

  13. Analysis of Inlfuencing Factors about Cleaning Effect of Automatic Cleaning Machine%全自动清洗机清洗效果影响因素分析

    Institute of Scientific and Technical Information of China (English)

    徐金荣; 洪范宗; 苏秋玲

    2013-01-01

    目的探讨全自动清洗机清洗效果的影响因素。方法全自动清洗机清洗器械时,在清洗夹中放置STF清洗效果检测卡进行检测。结果清洗剂、清洗温度、清洗时间等参数会对最终清洗效果产生影响;喷淋臂、加酶泵、清洗泵、器械装载等故障也会对最终清洗效果产生影响。结论全自动清洗机清洗效果的影响因素主要为清洗参数和机械故障。%Objective To explore the influencing factors about cleaning effect of automatic cleaning machine. Methods When the instruments are being cleaned by automatic cleaning machine, placing STF cleaning effect detection card in cleaning clamp to check the cleaning effect. Results Cleaning parameters such as cleaning agents, cleaning temperature and cleaning time have an impact on the ifnal cleaning effect. Mechanical failures such as pray arm failure, enzyme pump failure, cleaning pump failure and instrument loading failure also have an impact on the ifnal cleaning effect. Conclusion The main Inlfuencing factors about cleaning effect of automatic cleaning machine includes cleaning parameters and mechanical failures.

  14. Abort Gap Cleaning for LHC Run 2

    Energy Technology Data Exchange (ETDEWEB)

    Uythoven, Jan [CERN; Boccardi, Andrea [CERN; Bravin, Enrico [CERN; Goddard, Brennan [CERN; Hemelsoet, Georges-Henry [CERN; Höfle, Wolfgang [CERN; Jacquet, Delphine [CERN; Kain, Verena [CERN; Mazzoni, Stefano [CERN; Meddahi, Malika [CERN; Valuch, Daniel [CERN; Gianfelice-Wendt, Eliana [Fermilab

    2014-07-01

    To minimize the beam losses at the moment of an LHC beam dump the 3 μs long abort gap should contain as few particles as possible. Its population can be minimised by abort gap cleaning using the LHC transverse damper system. The LHC Run 1 experience is briefly recalled; changes foreseen for the LHC Run 2 are presented. They include improvements in the observation of the abort gap population and the mechanism to decide if cleaning is required, changes to the hardware of the transverse dampers to reduce the detrimental effect on the luminosity lifetime and proposed changes to the applied cleaning algorithms.

  15. Abort Gap Cleaning for LHC Run 2

    CERN Document Server

    Uythoven, J; Bravin, E; Goddard, B; Hemelsoet, GH; Höfle, W; Jacquet, D; Kain, V; Mazzoni, S; Meddahi, M; Valuch, D

    2015-01-01

    To minimise the beam losses at the moment of an LHC beam dump the 3 μs long abort gap should contain as few particles as possible. Its population can be minimised by abort gap cleaning using the LHC transverse damper system. The LHC Run 1 experience is briefly recalled; changes foreseen for the LHC Run 2 are presented. They include improvements in the observation of the abort gap population and the mechanism to decide if cleaning is required, changes to the hardware of the transverse dampers to reduce the detrimental effect on the luminosity lifetime and proposed changes to the applied cleaning algorithms.

  16. Development of Overflow-Prevention Valve with Trigger Mechanism.

    Science.gov (United States)

    Ishino, Yuji; Mizuno, Takeshi; Takasaki, Masaya

    2016-09-01

    A new overflow-prevention valve for combustible fluid is developed which uses a trigger mechanism. Loading arms for combustible fluid are used for transferring oil from a tanker to tanks and vice versa. The loading arm has a valve for preventing overflow. Overflow- prevention valves cannot use any electric component to avoid combustion. Therefore, the valve must be constructed only by mechanical parts. The conventional overflow-prevention valve uses fluid and pneumatic forces. It consists of a sensor probe, a cylinder, a main valve for shutting off the fluid and a locking mechanism for holding an open state of the main valve. The proposed overflow-prevention valve uses the pressure due to the height difference between the fluid level of the tank and the sensor probe. However, the force of the cylinder produced by the pressure is too small to release the locking mechanism. Therefore, a trigger mechanism is introduced between the cylinder and the locking mechanism. The trigger mechanism produces sufficient force to release the locking mechanism and close the main valve when the height of fluid exceeds a threshold value. A trigger mechanism is designed and fabricated. The operation necessary for closing the main valve is conformed experimentally.

  17. Waterless Clothes-Cleaning Machine

    Science.gov (United States)

    Johnson, Glenn; Ganske, Shane

    2013-01-01

    A waterless clothes-cleaning machine has been developed that removes loose particulates and deodorizes dirty laundry with regenerative chemical processes to make the clothes more comfortable to wear and have a fresher smell. This system was initially developed for use in zero-g, but could be altered for 1-g environments where water or other re sources are scarce. Some of these processes include, but are not limited to, airflow, filtration, ozone generation, heat, ultraviolet light, and photocatalytic titanium oxide.

  18. Cross-Language Support Mechanisms Significantly Aid Software Development

    DEFF Research Database (Denmark)

    Pfeiffer, Rolf-Helge; Wasowski, Andrzej

    2012-01-01

    Contemporary software systems combine many artifacts specified in various modeling and programming languages, domainspecific and general purpose as well. Since multi-language systems are so widespread, working on them calls for tools with cross-language support mechanisms such as (1) visualization...... tasks on the JTrac web application using a prototype tool implementing these mechanisms. The results speak clearly for integration of cross-language support mechanisms into software development tools, and justify research on automatic inference, manipulation and handling of cross-language relations......., (2) static checking, (3) navigation, and (4) refactoring of cross-language relations. We investigate whether these four mechanisms indeed improve efficiency and quality of development of multi-language systems. We run a controlled experiment in which 22 participants perform typical software evolution...

  19. DEVELOPING A NEW MECHANISM FOR LOCATING AND MANAGING MOBILE AGENTS

    Directory of Open Access Journals (Sweden)

    AHMED Y. YOUSUF

    2012-10-01

    Full Text Available There is a trade- off between the agent tracking process and the message delivery process in locating mobile agent systems. In the proposed system we try to strike a balance between these two processes. Communication in Multiagent system requires an efficient mechanism to manage these communications. Reliability and transparency are the design goal for any modern mechanism. In this paper we develop a new mechanism to manage the communication among autonomous mobile agents. This mechanism has the ability to manage agent mobility in an efficient, scalable and transparent way. So no message is lost and all transitions are transparent to the user. The architecture of the proposed mechanism is described and the naming, communication, localization and re-localization ways are given.

  20. Development of a Landing Mechanism for Asteroids with Soft Surface

    Directory of Open Access Journals (Sweden)

    Zhijun Zhao

    2013-01-01

    Full Text Available A landing mechanism to an asteroid with soft surface is developed. It consists of three landing feet, landing legs, cardan element, damping element, equipment base, anchoring system, and so on. Static structural analysis and modal analysis are carried out to check the strength and natural frequency of the landing mechanism with FEA. Testing platform for the anchoring system is introduced, and then the penetrating and anchoring tests of the anchoring system are carried out in different media. It shows that cohesion of the media has large influence on the penetrating and anchoring performance of the anchoring system. Landing tests of the landing mechanism with different velocities under simulated microgravity environment are carried out on the air-floating platform, and the impact accelerations are measured by the sensors on the landing mechanism. At the same time, these impact accelerations are processed by spectrum analysis to find the natural frequency of the landing mechanism.

  1. Recent in vivo surgical robot and mechanism developments.

    Science.gov (United States)

    Rentschler, M E; Oleynikov, D

    2007-09-01

    The surgical landscape is quickly changing because of the major driving force of robotics. Well-established technology that provides robotic assistance from outside the patient may soon give way to alternative approaches that place the robotic mechanisms inside the patient, whether through traditional laparoscopic ports or through other, natural orifices. While some of this technology is still being developed, other concepts are being evaluated through clinical trials. This article examines the state of the art in surgical robots and mechanisms by providing an overview of the ex vivo robotic systems that are commercially available to in vivo mechanisms, and robotic assistants that are being tested in animal models.

  2. Strengthening Clean Energy Technology Cooperation under the UNFCCC: Steps toward Implementation

    Energy Technology Data Exchange (ETDEWEB)

    Benioff, R.; de Coninck, H.; Dhar, S.; Hansen, U.; McLaren, J.; Painuly, J.

    2010-08-01

    Development of a comprehensive and effective global clean technology cooperation framework will require years of experimenting and evaluation with new instruments and institutional arrangements before it is clear what works on which scale and in which region or country. In presenting concrete examples, this paper aims to set the first step in that process by highlighting successful models and innovative approaches that can inform efforts to ramp up clean energy technology cooperation. This paper reviews current mechanisms and international frameworks for global cooperation on clean energy technologies, both within and outside of the UNFCCC, and provides selected concrete options for scaling up global cooperation on clean energy technology RD&D, enabling environment, and financing.

  3. Characterization, optimization and surface physics aspects of in situ plasma mirror cleaning.

    Science.gov (United States)

    Pellegrin, Eric; Sics, Igors; Reyes-Herrera, Juan; Perez Sempere, Carlos; Lopez Alcolea, Juan Josep; Langlois, Michel; Fernandez Rodriguez, Jose; Carlino, Vincent

    2014-03-01

    Although the graphitic carbon contamination of synchrotron beamline optics has been an obvious problem for several decades, the basic mechanisms underlying the contamination process as well as the cleaning/remediation strategies are not understood and the corresponding cleaning procedures are still under development. In this study an analysis of remediation strategies all based on in situ low-pressure RF plasma cleaning approaches is reported, including a quantitative determination of the optimum process parameters and their influence on the chemistry as well as the morphology of optical test surfaces. It appears that optimum results are obtained for a specific pressure range as well as for specific combinations of the plasma feedstock gases, the latter depending on the chemical aspects of the optical surfaces to be cleaned.

  4. State Clean Energy Practices: Renewable Fuel Standards

    Energy Technology Data Exchange (ETDEWEB)

    Mosey, G.; Kreycik, C.

    2008-07-01

    The State Clean Energy Policies Analysis (SCEPA) project is supported by the Weatherization and Intergovernmental Program within the Department of Energy's Office of Energy Efficiency and Renewable Energy. This project seeks to quantify the impacts of existing state policies, and to identify crucial policy attributes and their potential applicability to other states. The goal is to assist states in determining which clean energy policies or policy portfolios will best accomplish their environmental, economic, and security goals. For example, renewable fuel standards (RFS) policies are a mechanism for developing a market for renewable fuels in the transportation sector. This flexible market-based policy, when properly executed, can correct for market failures and promote growth of the renewable fuels industry better than a more command-oriented approach. The policy attempts to correct market failures such as embedded fossil fuel infrastructure and culture, risk associated with developing renewable fuels, consumer information gaps, and lack of quantification of the non-economic costs and benefits of both renewable and fossil-based fuels. This report focuses on renewable fuel standards policies, which are being analyzed as part of this project.

  5. Pursuing clean label is the big trend of healthy development of fermented pasta%追求清洁标签是发酵面食健康发展的大趋势

    Institute of Scientific and Technical Information of China (English)

    冷建新

    2011-01-01

    结合清洁标签的背景,介绍了发酵面食产品的标签使用现状,分析了发酵面食产品推行清洁标签制度的解决方案,进一步说明了清洁标签能促进发酵面食健康发展。%Combined with the background of clean label,the present situation of label of fermented pasta products was introduced and the solution of implementing clean label systems of fermented pasta products was analyzed,which tells clean label can promote the development of fermented pasta.

  6. Systematic development of reduced reaction mechanisms for dynamic modeling

    Science.gov (United States)

    Frenklach, M.; Kailasanath, K.; Oran, E. S.

    1986-01-01

    A method for systematically developing a reduced chemical reaction mechanism for dynamic modeling of chemically reactive flows is presented. The method is based on the postulate that if a reduced reaction mechanism faithfully describes the time evolution of both thermal and chain reaction processes characteristic of a more complete mechanism, then the reduced mechanism will describe the chemical processes in a chemically reacting flow with approximately the same degree of accuracy. Here this postulate is tested by producing a series of mechanisms of reduced accuracy, which are derived from a full detailed mechanism for methane-oxygen combustion. These mechanisms were then tested in a series of reactive flow calculations in which a large-amplitude sinusoidal perturbation is applied to a system that is initially quiescent and whose temperature is high enough to start ignition processes. Comparison of the results for systems with and without convective flow show that this approach produces reduced mechanisms that are useful for calculations of explosions and detonations. Extensions and applicability to flames are discussed.

  7. Financing the clean development mechanism through debt-for-efficiency swaps? Case study evidence from a Uruguayan wind farm project

    DEFF Research Database (Denmark)

    Cassimon, Danny; Prowse, Martin; Essers, Dennis

    2011-01-01

    this through analysing the use of a debt swap between Uruguay and Spain within a CDM wind farm project in Uruguay. The paper assesses this transaction according to a simple framework by which debt swaps can be evaluated: whether it delivers additional resources to the debtor country and/or debtor government...

  8. Gas flaring reduction in the Indonesian oil and gas sector: Technical and economic potential of clean development mechanism (CDM) projects

    OpenAIRE

    2005-01-01

    Indonesia currently ranks as the world's 17th oil and 6th gas producer, but its production levels are slowly declining. In Indonesia, the oil companies may extract, process and market associated gas jointly with the State Oil and Gas Board. In addition, they are allowed to use associated gas in operations, as well as re-inject or flare gas that cannot be marketed. However, associated gas is still considered as a by-product of oil, which can disturb the oil flow. Due to the lack of markets, in...

  9. Gas turbine cleaning upgrade (compressor wash)

    Energy Technology Data Exchange (ETDEWEB)

    Asplund, P. [Gas Turbine Efficiency, Jarfalla (Sweden)

    1998-12-31

    The influence of gas turbine degradation on operating costs is high. Gas turbine cleaning is one of many actions taken for power recovery and is to consider as preventive maintenance. It is generally performed within the industrial field and occasionally within the aero sector. In order to meet the gas turbine development win high blade loads and ever-increasing temperatures, together with emission Aces and environmental regulations, more efficient and careful cleaning methods are needed. Following a survey about potentials for cost reduction in gas turbine operation a new man-hour and water saving cleaning method has been evaluated for a standard process. Compared with traditional cleaning methods, the new method is water,- cost,- weight and space saving due to a new washing technique. Traditional methods are based on using different nozzles for ON and OFF-line cleaning, which rise the demand for complicated systems. In the new method the same nozzle installation, same liquid flow and pressure is used for both ON and OFF-line cleaning. This gives a cost reduction of appr. 20.000 - 30.000 USD per gas turbine depending on installation and size. Evaluation of the new method shows significantly improved ON -line cleaning performance and thus OFF -line cleaning is required only during scheduled stops. (orig.) 10 refs.

  10. Development of a Virtual Maintenance System for Complex Mechanical Product

    Directory of Open Access Journals (Sweden)

    Xin-hua Liu

    2013-01-01

    Full Text Available In order to improve the maintenance training effect of complex mechanical product, a virtual maintenance system was developed. The system framework was proposed, and the main functional modules were elaborated. A multilevel information representation model for complex mechanical product was put forward, and the flowchart of model transformation technology was designed. Moreover, a collision detection method based on hierarchical bounding volume was proposed, and the maintainability analysis and evaluation solution based on maintenance knowledge was presented. Finally, a prototype system was developed, and the proposed system was provedto be efficient through an example of hydraulic winch.

  11. BUDGET MECHANISM IN REGULATING THE DEVELOPMENT OF THE SOCIAL SPHERE

    Directory of Open Access Journals (Sweden)

    Victoria Vitalievna Chaban

    2015-05-01

    Full Text Available The article reviewed and analyzed budget mechanism in regulating the development of the social sphere in Ukraine.The purpose of this article is to study the theoretical foundations of the functioning of the budgetary mechanism in regulating the development of the social sphere.When writing articles following methods were used: the statistical method of comparison and generalization, the dialectical method of deduction method.The results of the study can be used by the Ministry of Finance of Ukraine, the Verkhovna Rada of Ukraine, the Ministry of social policy of Ukraine.

  12. Reinventing Design Principles for Developing Low-Viscosity Carbon Dioxide-Binding Organic Liquids for Flue Gas Clean Up.

    Science.gov (United States)

    Malhotra, Deepika; Koech, Phillip K; Heldebrant, David J; Cantu, David C; Zheng, Feng; Glezakou, Vassiliki-Alexandra; Rousseau, Roger

    2017-02-08

    Anthropogenic CO2 emissions from point sources (e.g., coal fired-power plants) account for the majority of the greenhouse gases in the atmosphere. Water-lean solvent systems such as CO2 -binding organic liquids (CO2 BOLs) are being developed to reduce the energy requirement for CO2 capture. Many water-lean solvents such as CO2 BOLs are currently limited by the high viscosities of concentrated electrolyte solvents, thus many of these solvents have yet to move toward commercialization. Conventional standard trial-and-error approaches for viscosity reduction, while effective, are time consuming and economically expensive. We rethink the metrics and design principles of low-viscosity CO2 -capture solvents using a combined synthesis and computational modeling approach. We critically study the effects of viscosity reducing factors such as orientation of hydrogen bonding, introduction of higher degrees of freedom, and cation or anion charge solvation, and assess whether or how each factor affects viscosity of CO2 BOL CO2 capture solvents. Ultimately, we found that hydrogen bond orientation and strength is the predominant factor influencing the viscosity in CO2 BOL solvents. With this knowledge, a new CO2 BOL variant, 1-MEIPADM-2-BOL, was synthesized and tested, resulting in a solvent that is approximately 60 % less viscous at 25 mol % CO2 loading than our base compound 1-IPADM-2-BOL. The insights gained from the current study redefine the fundamental concepts and understanding of what influences viscosity in concentrated organic CO2 -capture solvents.

  13. MEMS and Nano-Technology Clean Room

    Data.gov (United States)

    Federal Laboratory Consortium — The MEMS and Nano-Technology Clean Room is a state-of-the-art, 800 square foot, Class 1000-capable facility used for development of micro and sub-micro scale sensors...

  14. Reinventing Design Principles for Developing Low-Viscosity Carbon Dioxide-Binding Organic Liquids for Flue Gas Clean Up

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2017-01-11

    Anthropogenic carbon dioxide (CO2) emission from point sources, such as coal fired-power plants, account for the majority of the green houses gasses in the atmosphere. Capture, storage and utilization are required to mitigate adverse environmental effects. Aqueous amine-based CO2 capture solvents are currently considered the industry standard, but deployment to market is limited by their high regeneration energy demand. In that context, energy efficient and less-viscous water-lean transformational solvent systems known as CO2 Binding Organic Liquids (CO2BOLs) are being developed in our group to advance this technology to commercialization. Herein, we present a logical design approach based on fundamental concepts of organic chemistry and computer simulations aimed at lowering solvent viscosity. Conceptually, viscosity reduction would be achieved by systemmatic methods such as introduction of steric hindrance on the anion to minimize the intermolecular cation-anion interactions, fine tuning the electronics, hydrogen bonding orientation and strength, and charge solvation. Conventional standard trial-and-error approaches while effective, are time consuming and economically expensive. Herein, we rethink the metrics and design principles of low-viscosity CO2 capture solvents using a combined synthesis and computational modeling approach. We critically study the impacts of modyfying factors such as as orientation of hydrogen bonding, introduction of higher degrees of freedom and cation or anion charge solvation and assess if or how each factor impacts viscosity of CO2BOL CO2 capture solvents. Ultimately, we found that hydrogen bond orientation and strength is predominantly influencing the viscosity in CO2BOL solvents. With this knowledge, a new 1-MEIPADM-2-BOL CO2BOL variant was synthesized and tested, resulting in a solvent that is approximately 60% less viscous at 25 mol

  15. A Commercial IOTV Cleaning Study

    Science.gov (United States)

    2010-04-12

    quite clean and had a refreshing scent . The medium soiled garments (30%) also looked reasonably clean after one wash. The heavily soiled garments...and Solvair® Cleaning in cleaning soiled Improved Outer Tactical Vests (IOTV). Computer-controlled Wet Cleaning coupled with the use of LANADOL...to clean soiled IOTVs. Soldier Product Support Integration Directorate, ILSC U.S. Army Soldier Systems Center 15 Kansas Street, Natick, MA 01760

  16. Malformations of cortical development: genetic mechanisms and diagnostic approach

    Science.gov (United States)

    2017-01-01

    Malformations of cortical development are rare congenital anomalies of the cerebral cortex, wherein patients present with intractable epilepsy and various degrees of developmental delay. Cases show a spectrum of anomalous cortical formations with diverse anatomic and morphological abnormalities, a variety of genetic causes, and different clinical presentations. Brain magnetic resonance imaging has been of great help in determining the exact morphologies of cortical malformations. The hypothetical mechanisms of malformation include interruptions during the formation of cerebral cortex in the form of viral infection, genetic causes, and vascular events. Recent remarkable developments in genetic analysis methods have improved our understanding of these pathological mechanisms. The present review will discuss normal cortical development, the current proposed malformation classifications, and the diagnostic approach for malformations of cortical development. PMID:28203254

  17. Clean Energy Policy Analyses: Analysis of the Status and Impact of Clean Energy Policies at the Local Level

    Energy Technology Data Exchange (ETDEWEB)

    Busche, S.

    2010-12-01

    This report takes a broad look at the status of local clean energy policies in the United States to develop a better understanding of local clean energy policy development and the interaction between state and local policies. To date, the majority of clean energy policy research focuses on the state and federal levels. While there has been a substantial amount of research on local level climate change initiatives, this is one of the first analyses of clean energy policies separate from climate change initiatives. This report is one in a suite of reports analyzing clean energy and climate policy development at the local, state, and regional levels.

  18. Clean Energy Policy Analyses. Analysis of the Status and Impact of Clean Energy Policies at the Local Level

    Energy Technology Data Exchange (ETDEWEB)

    Busche, S. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2010-12-01

    This report takes a broad look at the status of local clean energy policies in the United States to develop a better understanding of local clean energy policy development and the interaction between state and local policies. To date, the majority of clean energy policy research focuses on the state and federal levels. While there has been a substantial amount of research on local level climate change initiatives, this is one of the first analyses of clean energy policies separate from climate change initiatives. This report is one in a suite of reports analyzing clean energy and climate policy development at the local, state, and regional levels.

  19. Mechanism Research on Standardized Development of Rural Private Finance

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    In generalizing the researching conditions of researchers on private finance,the paper introduces the connoted meaning of rural private finance broadly and narrowly.The paper states the forms of rural private finance(including private loaning,private bank,rural private collecting,financing organizations,cooperatives,NGO,small loaning organizations and so on),the relations between rural private finance and rural economic relations,pointing out that it is the combination of the strong and the weak,which may generate benefits with the operation of marketing mechanisms.The paper analyzes the historical causes,supervision causes and cultural causes of rural private finance,discussing mechanisms of standardized development of rural private finance:firstly,standardize the organization management mechanisms,including scaled controlling mechanisms and bank management mechanisms;secondly,complete finance supervision mechanisms;thirdly,moderate government intervention,including affording liberal policy environment and reducing the improper intervention;fourthly,upgrading qualities mechanisms,including cultivating the rural credit culture and improving the quality of regulatory personnel.

  20. EIA's role in the analysis of the Clean Air Act Amendments of 1990 and the development of the National Allowance Database

    Energy Technology Data Exchange (ETDEWEB)

    Beamon, J.A.; Linders, M.J. (Energy Information Administration, Washington, DC (United States))

    1993-01-01

    Throughout 1990 the Energy Information Administration (EIA) provided continuous data and analytic support to Congress during its deliberations on Title IV of the Clean Air Act Amendments of 1990 (CAA). Congress requested the Energy Information Administration (EIA) to review and analyze the sections that would affect electric utilities, specifically those relating to acid deposition (Title IV). By providing knowledgeable and impartial analysis, EIA clarified the likely effects of the various legislative proposals and helped Congress finalize the amendments. Even though the CAA is now law, EIA's efforts have not ended. During the analysis of the various proposals, EIA and EPA created a National Allowance Database (NAD). Now, under an agreement with the Environmental Protection Agency (EPA), a new version of the NAD is being developed to facilitate the implementation of the acid deposition provisions of the CAA. This article describes the analyses undertaken, points out where EIA's efforts led to improved understanding of the likely impacts of the CAA, and outlines EIA's continued efforts to assist EPA in the implementation of the amendments. 6 tabs.

  1. Ethanol Neurotoxicity in the Developing Cerebellum: Underlying Mechanisms and Implications

    Directory of Open Access Journals (Sweden)

    Ambrish Kumar

    2013-06-01

    Full Text Available Ethanol is the main constituent of alcoholic beverages that exerts toxicity to neuronal development. Ethanol affects synaptogenesis and prevents proper brain development. In humans, synaptogenesis takes place during the third trimester of pregnancy, and in rodents this period corresponds to the initial few weeks of postnatal development. In this period neuronal maturation and differentiation begin and neuronal cells start migrating to their ultimate destinations. Although the neuronal development of all areas of the brain is affected, the cerebellum and cerebellar neurons are more susceptible to the damaging effects of ethanol. Ethanol’s harmful effects include neuronal cell death, impaired differentiation, reduction of neuronal numbers, and weakening of neuronal plasticity. Neuronal development requires many hormones and growth factors such as retinoic acid, nerve growth factors, and cytokines. These factors regulate development and differentiation of neurons by acting through various receptors and their signaling pathways. Ethanol exposure during development impairs neuronal signaling mechanisms mediated by the N-methyl-d-aspartate (NMDA receptors, the retinoic acid receptors, and by growth factors such as brain-derived neurotrophic factor (BDNF, insulin-like growth factor 1 (IGF-I, and basic fibroblast growth factor (bFGF. In combination, these ethanol effects disrupt cellular homeostasis, reduce the survival and migration of neurons, and lead to various developmental defects in the brain. Here we review the signaling mechanisms that are required for proper neuronal development, and how these processes are impaired by ethanol resulting in harmful consequences to brain development.

  2. Quantum Mechanics Concept Assessment: Development and Validation Study

    Science.gov (United States)

    Sadaghiani, Homeyra R.; Pollock, Steven J.

    2015-01-01

    As part of an ongoing investigation of students' learning in first semester upper-division quantum mechanics, we needed a high-quality conceptual assessment instrument for comparing outcomes of different curricular approaches. The process of developing such a tool started with converting a preliminary version of a 14-item open-ended quantum…

  3. Mechanism of stability development of machine building enterprises

    Directory of Open Access Journals (Sweden)

    Andriу Vasylyuk

    2013-05-01

    Full Text Available Based on the correlation relationships between investment, output, average wage growth mechanism is investigated as a potential domestic investment, production and employment potential. It is shown that economic growth is possible with maximum use of internal resources, investments, domestic market development, leasing, such as the outsourcing of equipment and personnel

  4. Mechanism Of Environmental Franchising In The Sustainable Development Potential

    OpenAIRE

    Inna Illyashenko

    2011-01-01

    Reveals the types of environmental franchising: franchise environmental goods, manufacturing, service and environmental business format. Presents the methodological principles for the formation mechanisms of environmental franchise in implementing sustainable development potential. Proved economic, legal and organizational technology contractual relations regarding environmental franchise.

  5. Mechanical origins of rightward torsion in early chick brain development

    Science.gov (United States)

    Chen, Zi; Guo, Qiaohang; Dai, Eric; Taber, Larry

    2015-03-01

    During early development, the neural tube of the chick embryo undergoes a combination of progressive ventral bending and rightward torsion. This torsional deformation is one of the major organ-level left-right asymmetry events in development. Previous studies suggested that bending is mainly due to differential growth, however, the mechanism for torsion remains poorly understood. Since the heart almost always loops rightwards that the brain twists, researchers have speculated that heart looping affects the direction of brain torsion. However, direct evidence is lacking, nor is the mechanical origin of such torsion understood. In our study, experimental perturbations show that the bending and torsional deformations in the brain are coupled and that the vitelline membrane applies an external load necessary for torsion to occur. Moreover, the asymmetry of the looping heart gives rise to the chirality of the twisted brain. A computational model and a 3D printed physical model are employed to help interpret these findings. Our work clarifies the mechanical origins of brain torsion and the associated left-right asymmetry, and further reveals that the asymmetric development in one organ can induce the asymmetry of another developing organ through mechanics, reminiscent of D'Arcy Thompson's view of biological form as ``diagram of forces''. Z.C. is supported by the Society in Science - Branco Weiss fellowship, administered by ETH Zurich. L.A.T acknowledges the support from NIH Grants R01 GM075200 and R01 NS070918.

  6. Effects of exposure to the xenoestrogen octylphenol and subsequent transfer to clean water on liver and gonad ultrastructure during early development of Zoarces viviparus embryos.

    Science.gov (United States)

    Jespersen, Ase; Rasmussen, Tina H; Hirche, Majken; Sørensen, Kristine J K; Korsgaard, Bodil

    2010-08-01

    Female eelpouts (Zoarces viviparus L.) are exposed during early pregnancy to nominal concentrations of 100 microg/L of 4-tert-octylphenol (OP) or 0.5 microg/L of 17beta-estradiol (E2). Effects on maternal metabolism and on liver and gonad development in embryos were examined and compared with controls (C) during exposure and after transfer to clean water (depuration). In the mother fish, significantly higher concentrations of plasma vitellogenin (vtg) and calcium were found in the two exposed groups, when compared with the C group after exposure and depuration. When compared, however, with the respective values after exposure, vtg had decreased significantly after depuration. The hepatosomatic index was normalized after depuration. In both exposed groups, the hepatocytes were rounded and not distinctly polygonal as in the controls. The amount of glycogen was considerably less while the number of mitochondria increased, and the rER significantly proliferated after exposure as well as after depuration. The gonads of nine of more than 28 embryos in the group treated with OP exhibited a number of abnormalities as compared with the normal gonad development in both sexes. Feminization of the male gonads in the exposed specimens and a number of histopathological features were observed in all the abnormal gonads, whereas reliable male features, such as formation of seminiferous tubules or spermioduct, were not observed. This study showed that 4t-tert-OP and 17beta-estradiol exert estrogenic effects during very early development of the embryos and that depuration had a positive effect on the motherfish and her embryos.

  7. Clean Water Act

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Clean Water Act (CWA) establishes the basic structure for regulating discharges of pollutants into U.S. waters and regulating quality standards for surface...

  8. Effective Cleaning Radius Studies

    Energy Technology Data Exchange (ETDEWEB)

    Churnetski, B.V.

    2001-10-15

    This report discusses results of testing done in the Savannah River Laboratory half tank and full tank mockup facilities using kaolin clay slurries and the relationship between cleaning radius and pump and slurry characteristics.

  9. Emerging forward osmosis (FO) technologies and challenges ahead for clean water and clean energy applications

    KAUST Repository

    Chung, Tai-Shung

    2012-08-01

    The purpose of this short review is to share our understanding and perspectives with the chemical, environmental, water and osmotic power communities on FO processes in order to conduct meaningful R & D and develop effective and sustainable FO technologies for clean water and clean energy. © 2012 Elsevier Ltd. All rights reserved.

  10. Surface magnetic enhancement for coal cleaning

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, J.Y.

    1992-01-01

    The program consisted of a fundamental study to define the chemistry for the interactions between magnetic reagent and mineral and coal particles, a laboratory study to determine the applicability of this technology on coal cleaning, and a parameter study to evaluate the technical and economical feasibility of this technology for desulfurization and de-ashing under various processing schemes. Surface magnetic enhancement using magnetic reagent is a new technology developed at the Institute. This technology can be applied to separate pyrite and other minerals particles from coal with a magnetic separation after adsorbing magnetic reagent on the surface of pyrite and other minerals particles. Particles which have absorbed magnetic reagent are rendered magnetic. The adsorption can be controlled to yield selectivity. Thus, the separation of traditionally nonmagnetic materials with a magnetic separator can be achieved. Experiments have been performed to demonstrate the theoretical fundamentals and the applications of the technology. Adsorbability, adsorption mechanisms, and adsorption selectivity are included in the fundamental study. The effects of particle size, magnetic reagent dosage, solid contents, magnetic matrix, applied magnetic field strengths, retention times, and feed loading capacities are included in the application studies. Three coals, including Illinois No. 6, Lower Kittanning and Pocahontas seams, have been investigated. More than 90% pyritic sulfur and ash reductions have been achieved. Technical and economic feasibilities of this technology have been demonstrated in this study. Both are competitive to that of the froth flotation approach for coal cleaning.

  11. Cleaning without chlorinated solvents

    Energy Technology Data Exchange (ETDEWEB)

    Thompson, L.M.; Simandl, R.F.

    1994-12-31

    Because of health and environmental concerns, many regulations have been passed in recent years regarding the use of chlorinated solvents. The Oak Ridge Y-12 Plant has had an active program to find alternatives for these solvents used in cleaning applications for the past 7 years. During this time frame, the quantity of solvents purchased has been reduced by 92%. The program has been a twofold effort. Vapor degreasers used in batch cleaning-operations have been replaced by ultrasonic cleaning with aqueous detergent, and other organic solvents have been identified for use in hand-wiping or specialty operations. In order to qualify these alternatives for use, experimentation was conducted on cleaning ability as well as effects on subsequent operations such as welding, painting and bonding. Cleaning ability was determined using techniques such as X-ray photoelectron spectroscopy (XPS) and Fourier Transform Infrared Spectroscopy (FTIR) which are capable of examining monolayer levels of contamination on a surface. Solvents have been identified for removal of rust preventative oils, lapping oils, machining coolants, lubricants, greases, and mold releases. Solvents have also been evaluated for cleaning urethane foam spray guns, swelling of urethanes and swelling of epoxies.

  12. Development of a mechanism for nitrate photochemistry in snow.

    Science.gov (United States)

    Bock, Josué; Jacobi, Hans-Werner

    2010-02-01

    A reaction mechanism to reproduce photochemical processes in the snow is reported. We developed a box model to represent snow chemistry. Constrained by laboratory experiments carried out with artificial snow, we deduced first a reaction mechanism for N-containing species including 13 reactions. An optimization tool was developed to adjust systematically unknown photolysis rates of nitrate and nitrite (NO(2)(-)) and transfer rates of nitrogen oxides from the snow to the gas phase resulting in an optimum fit with respect to the experimental data. Further experiments with natural snow samples are presented, indicating that NO(2)(-) concentrations were much lower than in the artificial snow experiments. These observations were used to extend the reaction mechanism into a more general scheme including hydrogen peroxide (H(2)O(2)) and formaldehyde (HCHO) chemistry leading to a set of 18 reactions. The simulations indicate the importance of H(2)O(2) and HCHO as either a source or sink of hydroxyl radicals in the snow photochemistry mechanism. The addition of H(2)O(2) and HCHO in the mechanism allows the reproduction of the observed low NO(2)(-) concentration.

  13. Development of a hybrid chemical/mechanical heat pump

    Science.gov (United States)

    Grzyll, Lawrence R.; Silvestri, John J.; Scaringe, Robert P.

    1991-01-01

    The authors present the current development status of a hybrid chemical/mechanical heat pump for low-lift applications. The heat pump provides electronics cooling by evaporating a pure refrigerant from an absorbent/refrigerant mixture in a generator/cold plate. The current development focused on evaluation of absorbent/refrigerant pairs, corrosion testing, pump and compressor design, and electronic cold plate design. Two cycle configurations were considered. The first configuration utilized a standard mechanical compressor and pump. The second cycle configuration investigated pumps and compressors with non-moving parts. An innovative generator/cold plate design is also presented. The development to date shows that this cycle has about the same performance as standard vapor compression heat pumps with standard refrigerants but may have some performance and reliability advantages over vapor compression heat pumps.

  14. Roles of cofilin in development and its mechanisms of regulation.

    Science.gov (United States)

    Ohashi, Kazumasa

    2015-05-01

    Reorganization of the actin cytoskeleton is essential for cellular processes during animal development. Cofilin and actin depolymerizing factor (ADF) are potent actin-binding proteins that sever and depolymerize actin filaments, acting to generate the dynamics of the actin cytoskeleton. The activity of cofilin is spatially and temporally regulated by a variety of intracellular molecular mechanisms. Cofilin is regulated by cofilin binding molecules, is phosphorylated at Ser-3 (inactivation) by LIM-kinases (LIMKs) and testicular protein kinases (TESKs), and is dephosphorylated (reactivation) by slingshot protein phosphatases (SSHs). Although studies of the molecular mechanisms of cofilin-induced reorganization of the actin cytoskeleton have been ongoing for decades, the multicellular functions of cofilin and its regulation in development are just becoming apparent. This review describes the molecular mechanisms of generating actin dynamics by cofilin and the intracellular signaling pathways for regulating cofilin activity. Furthermore, recent findings of the roles of cofilin in the development of several tissues and organs, especially neural tissues and cells, in model animals are described. Recent developmental studies have indicated that cofilin and its regulatory mechanisms are involved in cellular proliferation and migration, the establishment of cellular polarity, and the dynamic regulation of organ morphology.

  15. Mechanisms of the Development of Allergy (MeDALL)

    DEFF Research Database (Denmark)

    Antó, Josep M; Bousquet, Jean; Akdis, Mübeccel

    2017-01-01

    Asthma, rhinitis, and eczema are complex diseases with multiple genetic and environmental factors interlinked through IgE-associated and non-IgE-associated mechanisms. Mechanisms of the Development of ALLergy (MeDALL; EU FP7-CP-IP; project no: 261357; 2010-2015) studied the complex links......,000 children. Omics data included those from historical genome-wide association studies (23,000 children) and DNA methylation (2,173), targeted multiplex biomarker (1,427), and transcriptomic (723) studies. Using classical epidemiology and machine-learning methods in 16,147 children aged 4 years and 11...

  16. Epigenetic mechanisms facilitating oligodendrocyte development, maturation, and aging.

    Science.gov (United States)

    Copray, Sjef; Huynh, Jimmy Long; Sher, Falak; Casaccia-Bonnefil, Patrizia; Boddeke, Erik

    2009-11-15

    The process of oligodendrocyte differentiation is regulated by a dynamic interaction between a genetic and an epigenetic program. Recent studies, addressing nucleosomal histone modifications have considerably increased our knowledge regarding epigenetic regulation of gene expression during oligodendrocyte development and aging. These results have generated new hypotheses regarding the mechanisms underlying the decreased efficiency of endogenous remyelination in response to demyelinating injuries with increasing age. In this review, we present an overview of the epigenetic mechanisms regulating gene expression at specific stages of oligodendrocyte differentiation and maturation as well as the changes that occur with aging.

  17. Clean Energy—The Ultimate Solution

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Major economies in the world have raised various proposals to reduce carbon emissions by applying clean energies in a bid to tackle climate change. As a major consumer of coal, China is facing mounting pressure, and experts are wrangling about which clean energy should come first on the government agenda. To get a closer look at the current situation in China, Beijing Review reporter Liu Yunyun sat down with Zhou Dadi, Director General Emeritus of the Energy Research Institute of the National Development and Reform Commission, who shared his insights on clean energy. Edited excerpts follow:

  18. Engineering development of advanced physical fine coal cleaning for premium fuel applications. Quarterly technical progress report 9, October 1, 1994--December 31, 1994

    Energy Technology Data Exchange (ETDEWEB)

    Moro, N.; Shields, G.L.; Smit, F.J.; Jha, M.C. [AMAX Research and Development Center, Golden, CO (United States)

    1995-01-25

    The primary goal of this project is the engineering development of two advanced physical fine coal cleaning processes, column flotation and selective agglomeration, for premium fuel applications. The project scope includes laboratory research and bench-scale testing on six coals to optimize these processes, followed by design, and construction of a 2-t/hr process development unit (PDU). The PDU will then be operated to generate 200 ton lots of each of three project coals, by each process. The project began in October, 1992 and is scheduled for completion by March, 1997. During Quarter 9 (October--December, 1995), parametric and optimization testing was completed for the Taggart, Sunnyside, and Indiana VII coal using a 12-inch Microcel{trademark} flotation column. The detailed design of the 2-t/hr PDU grinding, flotation, and dewatering circuits neared completion with the specification of the major pieces of capital equipment to be purchased for these areas. Selective agglomeration test work investigated the properties of various industrial grades of heptane for use during bench- and PDU-scale testing. It was decided to use a hydrotreated grade of commercial heptane due to its low cost and low concentration of aromatic compounds. The final Subtask 6.4 CWF Formulation Studies Test Plan was issued. A draft version of the Subtask 6.5 Preliminary Design and Test Plan Report was also issued, discussing the progress made in the design of the bench-scale selective agglomeration unit. PDU construction work moved forward through the issuing of 26 request for quotations and 21 award packages for capital equipment.

  19. Engineering development of advanced physical fine coal cleaning for premium fuel applications. Quarterly technical progress report 12, July--September 1995

    Energy Technology Data Exchange (ETDEWEB)

    Moro, N.; Shields, G.L.; Smit, F.J.; Jha, M.C.

    1995-10-31

    The primary goal of this project is the engineering development of two advanced physical fine coal cleaning processes, column flotation and selective agglomeration, for premium fuel applications. The project scope includes laboratory research and bench-scale testing on six coals to optimize these processes, followed by design, and construction and operation of a 2-t/hr process development unit. The project began in October, 1992, and is scheduled for completion by June, 1997. During Quarter 12 (July--September 1995), work continued on the Subtask 3.2 in-plant testing of the Microcel{trademark} flotation column at Lady Dunn. Under Subtask 4.4, additional toxic trace element analysis of column flotation samples finalized the data set. Data analysis indicates that reasonably good mass balances were achieved for most elements. The final Subtask 6.3 Selective Agglomeration Process Optimization topical report was issued this quarter. Preliminary Subtask 6.4 work investigating coal-water-fuel slurry formulation indicated that selective agglomeration products formulate slurries with lower viscosities than advanced flotation products. Work continued on Subtask 6.5 agglomeration bench-scale testing. Results indicate that a 2 lb ash/MBtu product could be produced at a 100-mesh topsize with the Elkhorn No. 3 coal. The detailed design of the 2 t/hr selective agglomeration module neared completion this quarter with the completion of additional revisions of both the process flow, and the process piping and instrument diagrams. Construction of the 2 t/hr PDU and advanced flotation module was completed this quarter and startup and shakedown testing began.

  20. Mechanisms of innovative self-development of regional business school

    Directory of Open Access Journals (Sweden)

    Anatoliy Viktorovich Molodchik

    2013-09-01

    Full Text Available Within the modern version of «Management 2.0» the approaches to the development of nonlinear starting mechanisms and maintenance of innovative self-development of organization on the example of regional business school are considered. It is noted that there are some possible models of behavior of regional business school among which the model focused on the activation of internal sources of development of the organization and its readiness to act as an infrastructure element of initiation of the self-development processes on the basis of openness, subjectivity and partnership. The business landscape of points of revitalization, results of initiation of activity and partnership form with the central concerned parties is offered. The effective partnership with science, authority, professional associations and business allows to create essentially new decisions for customer satisfaction. So, partner interaction with the client organizations is presented by new technology of joint creation of values in the form of project-focused training of innovative leaders and criteria of an assessment of its strategic productivity. The strategy of cultivating of mechanisms accepted by business school — attractors of innovative self-development is aimed at the formation of organization developing business — models of the new type typical for «2C-systems» (self-development and self-organizing systems.

  1. Clean energy for development and economic growth: Biomass and other renewable options to meet energy and development needs in poor nations

    Energy Technology Data Exchange (ETDEWEB)

    Lilley, Art; Pandey, Bikash; Karstad, Elsen; Owen, Matthew; Bailis, Robert; Ribot, Jesse; Masera, Omar; Diaz, Rodolpho; Benallou, Abdelahanine; Lahbabi, Abdelmourhit

    2012-10-01

    The document explores the linkages between renewable energy, poverty alleviation, sustainable development, and climate change in developing countries. In particular, the paper places emphasis on biomass-based energy systems. Biomass energy has a number of unique attributes that make it particularly suitable to climate change mitigation and community development applications.

  2. CO2 (dry ice) cleaning system

    Science.gov (United States)

    Barnett, Donald M.

    1995-03-01

    components include: a dry ice pellet supply, a non-reactive propellant gas source, a pellet and propellant metering device, and a media transport and acceleration hose and nozzle arrangement. Dry ice cleaning system operating parameters include: choice of propellant gas, its pressure and temperature, dry ice mass flow rate, dry ice pellet size and shape, and acceleration nozzle configuration. These parameters may be modified to fit different applications. ice cleaning industry will depend upon timely data acquisition of the effects that independent changes in these parameters have on cleaning rates, with respect to different surface coating and substrate combinations. &With this data, optimization of cleaning rates for particular applications will be possible. The analysis of the applicable range of modulation of these parameters, within system component mechanical constraints, has just begun.

  3. Clean Elements in Abelian Rings

    Indian Academy of Sciences (India)

    Angelina Y M Chin

    2009-04-01

    Let be a ring with identity. An element in is said to be clean if it is the sum of a unit and an idempotent. is said to be clean if all of its elements are clean. If every idempotent in is central, then is said to be abelian. In this paper we obtain some conditions equivalent to being clean in an abelian ring.

  4. Air Cleaning Technologies

    Science.gov (United States)

    2005-01-01

    Executive Summary Objective This health technology policy assessment will answer the following questions: When should in-room air cleaners be used? How effective are in-room air cleaners? Are in-room air cleaners that use combined HEPA and UVGI air cleaning technology more effective than those that use HEPA filtration alone? What is the Plasmacluster ion air purifier in the pandemic influenza preparation plan? The experience of severe acute respiratory syndrome (SARS) locally, nationally, and internationally underscored the importance of administrative, environmental, and personal protective infection control measures in health care facilities. In the aftermath of the SARS crisis, there was a need for a clearer understanding of Ontario’s capacity to manage suspected or confirmed cases of airborne infectious diseases. In so doing, the Walker Commission thought that more attention should be paid to the potential use of new technologies such as in-room air cleaning units. It recommended that the Medical Advisory Secretariat of the Ontario Ministry of Health and Long-Term Care evaluate the appropriate use and effectiveness of such new technologies. Accordingly, the Ontario Health Technology Advisory Committee asked the Medical Advisory Secretariat to review the literature on the effectiveness and utility of in-room air cleaners that use high-efficiency particle air (HEPA) filters and ultraviolet germicidal irradiation (UVGI) air cleaning technology. Additionally, the Ontario Health Technology Advisory Committee prioritized a request from the ministry’s Emergency Management Unit to investigate the possible role of the Plasmacluster ion air purifier manufactured by Sharp Electronics Corporation, in the pandemic influenza preparation plan. Clinical Need Airborne transmission of infectious diseases depends in part on the concentration of breathable infectious pathogens (germs) in room air. Infection control is achieved by a combination of administrative, engineering

  5. Development of sample extraction and clean-up strategies for target and non-target analysis of environmental contaminants in biological matrices.

    Science.gov (United States)

    Baduel, Christine; Mueller, Jochen F; Tsai, Henghang; Gomez Ramos, Maria Jose

    2015-12-24

    Recently, there has been an increasing trend towards multi-targeted analysis and non-target screening methods as a means to increase the number of monitored analytes. Previous studies have developed biomonitoring methods which specifically focus on only a small number of analytes with similar physico-chemical properties. In this paper, we present a simple and rapid multi-residue method for simultaneous extraction of polar and non-polar organic chemicals from biological matrices, containing up to 5% lipid content. Our method combines targeted multi-residue analysis using gas chromatography triple quadrupole mass spectrometry (GC-QqQ-MS/MS) and a multi-targeted analysis complemented with non-target screening using liquid chromatography coupled to a quadrupole time of flight mass spectrometry (LC-QTOF-MS/MS). The optimization of the chemical extraction procedure and the effectiveness of different clean-up methods were evaluated for two biological matrices: fish muscle (lipid content ∼2%) and breast milk (∼4%). To extract a wide range of chemicals, the partition/extraction procedure used for the QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) approach was tested as the initial step for the extraction of 77 target compounds covering a broad compound domain. All the target analytes have different physico-chemical properties (log Kow ranges from -0.3 to 10) and cover a broad activity spectrum; from polar pesticides, pharmaceuticals, personal care products (PPCPs) to highly lipophilic chemicals such as polybrominated diphenyl ethers (PBDEs), polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs) and organochloride pesticides (OCPs). A number of options were explored for the clean-up of lipids, proteins and other impurities present in the matrix. Zirconium dioxide-based sorbents as dispersive solid-phase extraction (d-SPE) and protein-lipid removal filter cartridges (Captiva ND Lipids) provided the best results for GC-MS and LC-MS analysis

  6. Solution mechanism guide: implementing innovation within a research & development organization.

    Science.gov (United States)

    Keeton, Kathryn E; Richard, Elizabeth E; Davis, Jeffrey R

    2014-10-01

    In order to create a culture more open to novel problem-solving mechanisms, NASA's Human Health and Performance Directorate (HH&P) created a strategic knowledge management tool that educates employees about innovative problem-solving techniques, the Solution Mechanism Guide (SMG). The SMG is a web-based, interactive guide that leverages existing and innovative problem-solving methods and presents this information as a unique user experience so that the employee is empowered to make the best decision about which problem-solving tool best meets their needs. By integrating new and innovative methods with existing problem solving tools, the SMG seamlessly introduces open innovation and collaboration concepts within HH&P to more effectively address human health and performance risks. This commentary reviews the path of creating a more open and innovative culture within HH&P and the process and development steps that were taken to develop the SMG.

  7. Molecular mechanism of size control in development and human diseases

    Institute of Scientific and Technical Information of China (English)

    Xiaolong Yang; Tian Xu

    2011-01-01

    How multicellular organisms control their size is a fundamental question that fascinated generations of biologists.In the past 10 years, tremendous progress has been made toward our understanding of the molecular mechanism underlying size control. Original studies from Drosophila showed that in addition to extrinsic nutritional and hormonal cues, intrinsic mechanisms also play important roles in the control of organ size during development. Several novel signaling pathways such as insulin and Hippo-LATS signaling pathways have been identified that control organ size by regulating cell size and/or cell number through modulation of cell growth, cell division, and cell death. Later studies using mammalian cell and mouse models also demonstrated that the signaling pathways identified in flies are also conserved in mammals. Significantly, recent studies showed that dysregulation of size control plays important roles in the development of many human diseases sucha as cancer,diabetes,and hypertrophy.

  8. Developing economic and managerial competencies of bachelors in mechanical engineering

    OpenAIRE

    Lizunkov Vladislav G.; Minin Michail G.; Malushko Elena Y.; Medvedev Valentin E.

    2016-01-01

    The paper deals with the development problems of economic and managerial competencies of bachelors after graduating from engineering higher schools to meet employers’ requirements, through implementing the Federal State Education Standards (FSES) of the third generation. The case study is conducted on the basis of training programs for the bachelor’s degree in Mechanical Engineering at Yurga Institute of Technology (Affiliate) of National Research Tomsk Polytechnic University. The list of eco...

  9. Clean and Highly Efficient Utilization of Coal

    Institute of Scientific and Technical Information of China (English)

    WANG Jianguo; YANG Li

    2011-01-01

    @@ Clean and highly efficient utilization of coal is an important scientific and technological issue.As the petroleum resource decreases but its consumption increases, all of the countries in the world have to face the big issue of sustainable development of energy and economy and protection of environment.Therefore, study on clean coal technology (CCT) has attracted much attention and become one of important themes of energy research.

  10. Recent Advances in Precombustion Coal Cleaning Processes

    Institute of Scientific and Technical Information of China (English)

    Shiao-HungChiang; DaxinHe

    1994-01-01

    The mineral matter in coal constitutes a major impediment to the direct use of coal in power plants.A concerted effort has been mounted to reduce the ash/sulfur contents in product coal to meet the ever more stringent environmental regulations.In recent years,significant advances have taken place in fine coal cleaning technologies.A review of recent developments in aveanced physical,chemical and biological processes for deep-cleaning of fine coal is presented.

  11. State perspectives on clean coal technology deployment

    Energy Technology Data Exchange (ETDEWEB)

    Moreland, T. [State of Illinois Washington Office, Washington, DC (United States)

    1997-12-31

    State governments have been funding partners in the Clean Coal Technology program since its beginnings. Today, regulatory and market uncertainties and tight budgets have reduced state investment in energy R and D, but states have developed program initiatives in support of deployment. State officials think that the federal government must continue to support these technologies in the deployment phase. Discussions of national energy policy must include attention to the Clean Coal Technology program and its accomplishments.

  12. Kinetic comparisons during variations of the power clean.

    Science.gov (United States)

    Comfort, Paul; Allen, Mark; Graham-Smith, Phillip

    2011-12-01

    Comfort, P, Allen, M, and Graham-Smith, P. Kinetic comparisons during variations of the power clean. J Strength Cond Res 25(12): 3269-3273, 2011-The aim of this investigation was to determine the differences in peak power, peak vertical ground reaction forces, and rate of force development (RFD) during variations of the power clean. Elite rugby league players (n = 16; age 22 ± 1.58 years; height 182.25 ± 2.81 cm; body mass 98.65 ± 7.52 kg) performed 1 set of 3 repetitions of the power clean, hang power clean, midthigh power clean, or midthigh clean pull, using 60% of 1 repetition maximum power clean, in a randomized order, while standing on a force platform. One-way analysis of variance with Bonferroni post hoc analysis revealed a significantly (p clean (3,565.7 ± 410.6 W) and the midthigh clean pull (3,686.8 ± 386.5 W) compared with both the power clean (2,591.2 ± 645.5 W) and the hang power clean (3,183.6 ± 309.1 W), along with a significantly (p clean (2,813.8 ± 200.5 N) and the midthigh clean pull (2,901.3 ± 226.1 N) compared with both the power clean (2,264.1 ± 199.6 N) and the hang power clean (2,479.3 ± 267.6 N). The midthigh power clean (15,049.8 ± 4,415.7 N·s) and the midthigh clean pull (15,623.6 ± 3,114.4 N·s) also demonstrated significantly (p clean (8,657.9 ± 2,746.6 N·s) and the hang power clean (10,314.4 ± 4,238.2 N·s). From the findings of this study, when training to maximize power, Fz, and RFD, the midthigh power clean and midthigh clean pull appear to be the most advantageous variations of the power clean to perform.

  13. Molecular mechanisms of Aspergillus flavus secondary metabolism and development.

    Science.gov (United States)

    Amare, Meareg G; Keller, Nancy P

    2014-05-01

    The plant and human opportunistic fungus Aspergillus flavus is recognized for the production of the carcinogen aflatoxin. Although many reviews focus on the wealth of information known about aflatoxin biosynthesis, few articles describe other genes and molecules important for A. flavus development or secondary metabolism. Here we compile the most recent work on A. flavus secondary metabolite clusters, environmental response mechanisms (stress response pathways, quorum sensing and G protein signaling pathways) and the function of the transcriptional regulatory unit known as the Velvet Complex. A comparison to other Aspergilli reveals conservation in several pathways affecting fungal development and metabolism.

  14. Developing mechanical milking in camels? Some main steps to take….

    Science.gov (United States)

    Marnet, Pierre Guy; Atigui, Moufida; Hammadi, Mohamed

    2016-06-01

    After a first phase of development in the ex-Soviet Union in the 1940s, camel mechanical milking is now developing again in the Arabic peninsula, North and East Africa, Asia, Australia and even in the USA and Europe in a lesser extent, because of the great demand and important health value of camel milk. Nevertheless, such a development remains empirical and uses trial and error methodology, which is generally more time-consuming and more expensive and could create a deadlock in the situation. Nevertheless, developing mechanical milking of camels could be done throughout a step by step well-designed approach rather than this empirical approach. It is the only way to understand the animal/machine interaction and to give us the means to adapt machine milking to the different situations encountered in the world and to animal specificities.After describing the different essential and ancillary steps of this development (knowledge of animal physiology, udder and teat shapes, teat functional characteristics, first functional data of milking including teat reaction, milk emission kinetic, efficiency of milk extraction, weaning procedure, milking procedure, milking behavior of animals, adaptation of material and settings…), we aim to relate, as example, the first results obtained in Tunisian dromedary camels in the last 4 years as basis for more adapted or even specific materials and setting evolution.

  15. Development of mechanical structure design technology for LMR

    Energy Technology Data Exchange (ETDEWEB)

    Yoo, Bong; Lee, Jae Han; Joo, Young Sang [and others

    2000-05-01

    In this project, fundamentals for conceptual design of mechanical structure system for LMR are independently established. The research contents are as follow; at first, conceptual design for SSC, design integration of interfaces, design consistency to keep functions and interfaces by developing arrangement of reactor system and 3 dimensional concept drawings, development and revision of preliminary design requirements and structural design basis, and evaluation of structural integrity for SSC following structural design criteria to check the conceptual design to be proper, at second, development of high temperature structure design and analysis technology and establishment of high temperature structural analysis codes and scheme, development of seismic isolation design concept to reduce seismic design loads to SCC and establishment of seismic analysis codes and scheme.

  16. Handbook for cleaning for semiconductor manufacturing fundamentals and applications

    CERN Document Server

    Reinhardt, Karen A

    2011-01-01

    This comprehensive volume provides an in-depth discussion of the fundamentals of cleaning and surface conditioning of semiconductor applications such as high-k/metal gate cleaning, copper/low-k cleaning, high dose implant stripping, and silicon and SiGe passivation. The theory and fundamental physics associated with wet etching and wet cleaning is reviewed, plus the surface and colloidal aspects of wet processing. Formulation development practices and methodology are presented along with the applications for preventing copper corrosion, cleaning aluminum lines, and other sensitive layers. This

  17. Replacement Technologies for Precision Cleaning of Aerospace Hardware for Propellant Service

    Science.gov (United States)

    Beeson, Harold; Kirsch, Mike; Hornung, Steven; Biesinger, Paul

    1997-01-01

    The NASA White Sands Test Facility (WSTF) is developing cleaning and verification processes to replace currently used chlorofluorocarbon-l13- (CFC-113-) based processes. The processes being evaluated include both aqueous- and solvent-based techniques. Replacement technologies are being investigated for aerospace hardware and for gauges and instrumentation. This paper includes the findings of investigations of aqueous cleaning and verification of aerospace hardware using known contaminants, such as hydraulic fluid and commonly used oils. The results correlate nonvolatile residue with CFC 113. The studies also include enhancements to aqueous sampling for organic and particulate contamination. Although aqueous alternatives have been identified for several processes, a need still exists for nonaqueous solvent cleaning, such as the cleaning and cleanliness verification of gauges used for oxygen service. The cleaning effectiveness of tetrachloroethylene (PCE), trichloroethylene (TCE), ethanol, hydrochlorofluorocarbon 225 (HCFC 225), HCFC 141b, HFE 7100(R), and Vertrel MCA(R) was evaluated using aerospace gauges and precision instruments and then compared to the cleaning effectiveness of CFC 113. Solvents considered for use in oxygen systems were also tested for oxygen compatibility using high-pressure oxygen autogenous ignition and liquid oxygen mechanical impact testing.

  18. A novel compound cleaning solution for benzotriazole removal after copper CMP

    Science.gov (United States)

    Zhangbing, Gu; Yuling, Liu; Baohong, Gao; Chenwei, Wang; Haiwen, Deng

    2015-10-01

    After the chemical mechanical planarization (CMP) process, the copper surface is contaminated by a mass of particles (e.g. silica) and organic residues (e.g. benzotriazole), which could do great harm to the integrated circuit, so post-CMP cleaning is essential. In particular, benzotriazole (BTA) forms a layer of Cu-BTA film with copper on the surface, which leads to a hydrophobic surface of copper. So an effective cleaning solution is needed to remove BTA from the copper surface. In this work, a new compound cleaning solution is designed to solve two major problems caused by BTA: one is removing BTA and the other is copper surface corrosion that is caused by the cleaning solution. The cleaning solution is formed of alkaline chelating agent (FA/O II type), which is used to remove BTA, and a surfactant (FA/O I type), which is used as a corrosion inhibitor. BTA removal is characterized by contact angle measurements and electrochemical techniques. The inhibiting corrosion ability of the surfactant is also characterized by electrochemical techniques. The proposed compound cleaning solution shows advantages in removing BTA without corroding the copper surface. Project supported by the Special Project Items No.2 in National Long-Term Technology Development Plan, China (Nos. 2009ZX02308-003, 2014ZX02301003-007).

  19. Clean Energy Application Center

    Energy Technology Data Exchange (ETDEWEB)

    Freihaut, Jim

    2013-09-30

    The Mid Atlantic Clean Energy Application Center (MACEAC), managed by The Penn State College of Engineering, serves the six states in the Mid-Atlantic region (Pennsylvania, New Jersey, Delaware, Maryland, Virginia and West Virginia) plus the District of Columbia. The goals of the Mid-Atlantic CEAC are to promote the adoption of Combined Heat and Power (CHP), Waste Heat Recovery (WHR) and District Energy Systems (DES) in the Mid Atlantic area through education and technical support to more than 1,200 regional industry and government representatives in the region. The successful promotion of these technologies by the MACEAC was accomplished through the following efforts; (1)The MACEAC developed a series of technology transfer networks with State energy and environmental offices, Association of Energy Engineers local chapters, local community development organizations, utilities and, Penn State Department of Architectural Engineering alumni and their firms to effectively educate local practitioners about the energy utilization, environmental and economic advantages of CHP, WHR and DES; (2) Completed assessments of the regional technical and market potential for CHP, WHR and DE technologies application in the context of state specific energy prices, state energy and efficiency portfolio development. The studies were completed for Pennsylvania, New Jersey and Maryland and included a set of incentive adoption probability models used as a to guide during implementation discussions with State energy policy makers; (3) Using the technical and market assessments and adoption incentive models, the Mid Atlantic CEAC developed regional strategic action plans for the promotion of CHP Application technology for Pennsylvania, New Jersey and Maryland; (4) The CHP market assessment and incentive adoption model information was discussed, on a continuing basis, with relevant state agencies, policy makers and Public Utility Commission organizations resulting in CHP favorable incentive

  20. Investigation of the impact of cleaning on the adhesive bond and the process implications

    Energy Technology Data Exchange (ETDEWEB)

    EMERSON,JOHN A.; GUESS,TOMMY R.; ADKINS,CAROL L. JONES; CURRO,JOHN G.; REEDY JR.,EARL DAVID; LOPEZ,EDWIN P.; LEMKE,PAUL A.

    2000-05-01

    While surface cleaning is the most common process step in DOE manufacturing operations, the link between a successful adhesive bond and the surface clean performed before adhesion is not well understood. An innovative approach that combines computer modeling expertise, fracture mechanics understanding, and cleaning experience to address how to achieve a good adhesive bond is discussed here to develop a capability that would result in reduced cleaning development time and testing, improved bonds, improved manufacturability, and even an understanding that leads to improved aging. A simulation modeling technique, polymer reference interaction site model applied near wall (Wall PRISM), provided the capability to include contaminants on the surface. Calculations determined an approximately 8% reduction in the work of adhesion for 1% by weight of ethanol contamination on the structure of a silicone adhesive near a surface. The demonstration of repeatable coatings and quantitative analysis of the surface for deposition of controlled amounts of contamination (hexadecane and mineral oil) was based on three deposition methods. The effect of the cleaning process used on interfacial toughness was determined. The measured interfacial toughness of samples with a Brulin cleaned sandblasted aluminum surface was found to be {approximately} 15% greater than that with a TCE cleaned aluminum surface. The sensitivity of measured fracture toughness to various test conditions determined that both interfacial toughness and interface corner toughness depended strongly on surface roughness. The work of adhesion value for silicone/silicone interface was determined by a contact mechanics technique known as the JKR method. Correlation with fracture data has allowed a better understanding between interfacial fracture parameters and surface energy.

  1. NOVEL GAS CLEANING/CONDITIONING FOR INTEGRATED GASIFICATION COMBINED CYCLE

    Energy Technology Data Exchange (ETDEWEB)

    Dennis A. Horazak; Richard A. Newby; Eugene E. Smeltzer; Rachid B. Slimane; P. Vann Bush; James L. Aderhold Jr; Bruce G. Bryan

    2005-12-01

    Development efforts have been underway for decades to replace dry-gas cleaning technology with humid-gas cleaning technology that would maintain the water vapor content in the raw gas by conducting cleaning at sufficiently high temperature to avoid water vapor condensation and would thus significantly simplify the plant and improve its thermal efficiency. Siemens Power Generation, Inc. conducted a program with the Gas Technology Institute (GTI) to develop a Novel Gas Cleaning process that uses a new type of gas-sorbent contactor, the ''filter-reactor''. The Filter-Reactor Novel Gas Cleaning process described and evaluated here is in its early stages of development and this evaluation is classified as conceptual. The commercial evaluations have been coupled with integrated Process Development Unit testing performed at a GTI coal gasifier test facility to demonstrate, at sub-scale the process performance capabilities. The commercial evaluations and Process Development Unit test results are presented in Volumes 1 and 2 of this report, respectively. Two gas cleaning applications with significantly differing gas cleaning requirements were considered in the evaluation: IGCC power generation, and Methanol Synthesis with electric power co-production. For the IGCC power generation application, two sets of gas cleaning requirements were applied, one representing the most stringent ''current'' gas cleaning requirements, and a second set representing possible, very stringent ''future'' gas cleaning requirements. Current gas cleaning requirements were used for Methanol Synthesis in the evaluation because these cleaning requirements represent the most stringent of cleaning requirements and the most challenging for the Filter-Reactor Novel Gas Cleaning process. The scope of the evaluation for each application was: (1) Select the configuration for the Filter-Reactor Novel Gas Cleaning Process, the arrangement of the

  2. Developing economic and managerial competencies of bachelors in mechanical engineering

    Directory of Open Access Journals (Sweden)

    Lizunkov Vladislav G.

    2016-01-01

    Full Text Available The paper deals with the development problems of economic and managerial competencies of bachelors after graduating from engineering higher schools to meet employers’ requirements, through implementing the Federal State Education Standards (FSES of the third generation. The case study is conducted on the basis of training programs for the bachelor’s degree in Mechanical Engineering at Yurga Institute of Technology (Affiliate of National Research Tomsk Polytechnic University. The list of economic and managerial competencies for bachelors in mechanical engineering is specified according to the third generation FSES, enlarged with new competences based on surveys and analyses after questioning employers. The criteria and indicators are described to identify maturity levels in terms of economic and managerial competencies for bachelors. A structural and functional model for training mechanical engineering bachelors has been tested in the implementation of the bachelor’s degree courses in "Mechanical engineering" at Yurga Institute of Technology (Affiliate of National Research Tomsk Polytechnic University, in the period from 2011 to 2015.

  3. Mechanisms of axon degeneration: from development to disease.

    Science.gov (United States)

    Saxena, Smita; Caroni, Pico

    2007-10-01

    Axon degeneration is an active, tightly controlled and versatile process of axon segment self-destruction. Although not involving cell death, it resembles apoptosis in its logics. It involves three distinct steps: induction of competence in specific neurons, triggering of degeneration at defined axon segments of competent neurons, and rapid fragmentation and removal of the segments. The mechanisms that initiate degeneration are specific to individual settings, but the final pathway of pruning is shared; it involves microtubule disassembly, axon swellings, axon fragmentation, and removal of the remnants by locally recruited phagocytes. The tight regulatory properties of axon degeneration distinguish it from passive loss phenomena, and confer significance to processes that involve it. Axon degeneration has prominent roles in development, upon lesions and in disease. In development, it couples the progressive specification of neurons and circuits to the removal of defined axon branches. Competence might involve transcriptional switches, and local triggering can involve axon guidance molecules and synaptic activity patterns. Lesion-induced Wallerian degeneration is inhibited in the presence of Wld(S) fusion protein in neurons; it involves early local, and later, distal degeneration. It has recently become clear that like in other settings, axon degeneration in disease is a rapid and specific process, which should not be confused with a variety of disease-related pathologies. Elucidating the specific mechanisms that initiate axon degeneration should open up new avenues to investigate principles of circuit assembly and plasticity, to uncover mechanisms of disease progression, and to identify ways of protecting synapses and axons in disease.

  4. Quiet Clean Short-haul Experimental Engine (QCSEE). The aerodynamic and mechanical design of the QCSEE over-the-wing fan

    Science.gov (United States)

    1976-01-01

    The aerodynamic and mechanical design of a fixed-pitch 1.36 pressure ratio fan for the over-the-wing (OTW) engine is presented. The fan has 28 blades. Aerodynamically, the fan blades were designed for a composite blade, but titanium blades were used in the experimental fan as a cost savings measure.

  5. Large Scale Cleaning Telescope Mirrors with Electron Beams Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Cleaning Lenses and Mirrored Surfaces with Electrons tasks include: Development of Fractal Wand Geometries; Vacuum Chamber testing for Fractal Wand Prototypes;...

  6. Development and mechanical properties of structural materials from lunar simulants

    Science.gov (United States)

    Desai, Chandra S.; Girdner, K.; Saadatmanesh, H.; Allen, T.

    1991-01-01

    Development of the technologies for manufacture of structural and construction materials on the Moon, utilizing local lunar soil (regolith), without the use of water, is an important element for habitats and explorations in space. Here, it is vital that the mechanical behavior such as strength and flexural properties, fracture toughness, ductility and deformation characteristics be defined toward establishment of the ranges of engineering applications of the materials developed. The objective is to describe the research results in two areas for the above goal: (1) liquefaction of lunar simulant (at about 100 C) with different additives (fibers, powders, etc.); and (2) development and use of a new triaxial test device in which lunar simulants are first compressed under cycles of loading, and then tested with different vacuums and initial confining or in situ stress.

  7. [The behavioral-neuroendocrine mechanism of development of homosexuality].

    Science.gov (United States)

    Xue, Hui; Tai, Fa-Dao

    2007-10-01

    In this review, we primarily focus on the behavioral-neuroendocrine mechanism of development of homosexuality from genetic, neuroendocrine neuroanatomical and behavioral studies. Besides the influence of genetics and environment, sexual orientation was determined by the early perinatal hormone exposure. Gonadal steroidal hormone interacted with many neurotransmitters in individual development by hypothalamus pituitary adrenal axis and hypothalamus pituitary gonadal axis, which regulated the individual's sexual orientation. It was summarized here about the future directions on sexual orientation and demonstrated problems which would have to investigate next step. All these may be beneficial for our understanding of the homosexuality and paying attention to psychological and physiological health of homosexuality, which is useful to prevent the development of teenage homosexuality.

  8. What is Clean Cities? October 2011 (Brochure)

    Energy Technology Data Exchange (ETDEWEB)

    2011-10-01

    Brochure describes the Clean Cities program and includes the contact information for its 85 coalitions. Sponsored by the U.S. Department of Energy's (DOE) Vehicle Technologies Program (VTP), Clean Cities is a government-industry partnership that reduces petroleum consumption in the transportation sector. Clean Cities contributes to the energy, environmental, and economic security of the United States by supporting local decisions to reduce our dependence on imported petroleum. Established in 1993 in response to the Energy Policy Act (EPAct) of 1992, the partnership provides tools and resources for voluntary, community-centered programs to reduce consumption of petroleum-based fuels. In nearly 100 coalitions, government agencies and private companies voluntarily come together under the umbrella of Clean Cities. The partnership helps all parties identify mutual interests and meet the objectives of reducing the use of petroleum, developing regional economic opportunities, and improving air quality. Clean Cities deploys technologies and practices developed by VTP. These include idle-reduction equipment, electric-drive vehicles, fuel economy measures, and renewable and alternative fuels, such as natural gas, liquefied petroleum gas (propane), electricity, hydrogen, biofuels, and biogas. Idle-reduction equipment is targeted primarily to buses and heavy-duty trucks, which use more than 2 billion gallons of fuel every year in the United States while idling. Clean Cities fuel economy measures include public education on vehicle choice and fuel-efficient driving practices.

  9. Understanding the mechanism of base development of hydrogen silsesquioxane

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jihoon; Chao, Weilun; Liang, Xiaogan; Griedel, Brian D.; Olynick, Deirdre L

    2009-01-09

    There have been numerous studies of electron beam exposed hydrogen silsesquioxane (HSQ) development conditions in order to improve the developer contrast. For TMAH based development, improvements were made by going to higher TMAH normalities and heating the developer. Yang and Berggren showed development of electron beam exposed (HSQ) by NaOH with added Na salts (various anions) significantly improves the contrast. Here, we study the contrast and etching rates of 100 keV exposed HSQ in NaOH in the presence of LiCl, NaCl, and KCl salts and use this as a segway to understand the mechanisms governing contrast during development HSQ development. The basic mechanism of development of HSQ can be understood by comparing to etching of quartz in basic solutions. Hydroxide ions act as nucleophiles which attack silicon. When a silicon-oxygen bond of the Si-O-Si matrix is broken, Si-O{sup -} and Si-OH are formed which can reversibly react to form the original structure. When a Si-H bond is broken via reaction with hydroxide, Si-O{sup -} and H{sub 2} gas are formed. Salts can change the etching rates as a function of dose in a non-linear fashion to increase etch contrast. Figs. 1, 2, and 3 show contrast curves for HSQ developed in 0.25 N sodium hydroxide and with the addition of NaCl, LiCl and KCl salts at several concentrations. NaCl addition resulted in the highest contrast. Contrast improves with additional salt concentration while sensitivity decreases. Interestingly enough, addition of salt decreases the removal of material of NaOH alone at higher doses while increasing the rate at lower concentrations. Addition of LiCl salts improves contrast over NaOH alone. Furthermore, the sensitivity at all doses increases as the LiCl concentration increases, a salting out effect. Similar to NaCl salt behavior, the addition of KCl salts, improves contrast at the expense of sensitivity. However, unlike NaCl, even at very high doses, KCl addition increases removal rate of HSQ. We

  10. Quiet Clean Short-haul Experimental Engine (QCSEE): The aerodynamic and mechanical design of the QCSEE under-the-wing fan

    Science.gov (United States)

    1977-01-01

    The design, fabrication, and testing of two experimental high bypass geared turbofan engines and propulsion systems for short haul passenger aircraft are described. The aerodynamic and mechanical design of a variable pitch 1.34 pressure ratio fan for the under the wing (UTW) engine are included. The UTW fan was designed to permit rotation of the 18 composite fan blades into the reverse thrust mode of operation through both flat pitch and stall pitch directions.

  11. Semantic mechanisms may be responsible for developing synesthesia

    Directory of Open Access Journals (Sweden)

    Aleksandra eMroczko-Wąsowicz

    2014-08-01

    Full Text Available Currently, little is known about how synesthesia develops and which aspects of synesthesia can be acquired through a learning process. We review the increasing evidence for the role of semantic representations in the induction of synesthesia, and argue for the thesis that synesthetic abilities are developed and modified by semantic mechanisms. That is, in certain people semantic mechanisms associate concepts with perception-like experiences—and this association occurs in an extraordinary way. This phenomenon can be referred to as higher synesthesia or ideasthesia. The present analysis suggests that synesthesia develops during childhood and is being enriched further throughout the synesthetes’ lifetime; for example, the already existing concurrents may be adopted by novel inducers or new concurrents may be formed. For a deeper understanding of the origin and nature of synesthesia we propose to focus future research on two aspects: i the similarities between synesthesia and ordinary phenomenal experiences based on concepts, and ii the tight entanglement of perception, cognition and the conceptualization of the world. Most importantly, an explanation of how biological systems get to generate experiences, synesthetic or not, may have to involve an explanation of how we form semantic networks in general and what their role is in our ability to be aware of the surrounding world.

  12. Cleanly: trashducation urban system

    DEFF Research Database (Denmark)

    Reif, Inbal; Alt, Florian; Ramos, Juan David Hincapie

    Half the world's population is expected to live in urban areas by 2020. The high human density and changes in peoples' consumption habits result in an ever-increasing amount of trash that must be handled by governing bodies. Problems created by inefficient or dysfunctional cleaning services...

  13. Clean Cities Tools

    Energy Technology Data Exchange (ETDEWEB)

    None

    2014-12-19

    The U.S. Department of Energy's Clean Cities offers a large collection of Web-based tools on the Alternative Fuels Data Center. These calculators, interactive maps, and data searches can assist fleets, fuels providers, and other transportation decision makers in their efforts to reduce petroleum use.

  14. Neutrino Detection With CLEAN

    CERN Document Server

    McKinsey, D N

    2005-01-01

    This article describes CLEAN, an approach to the detection of low-energy solar neutrinos and neutrinos released from supernovae. The CLEAN concept is based on the detection of elastic scattering events (neutrino-electron scattering and neutrino-nuclear scattering) in liquified noble gases such as liquid helium, liquid neon, and liquid xenon, all of which scintillate brightly in the ultraviolet. Key to the CLEAN technique is the use of a thin film of wavelength-shifting fluor to convert the ultraviolet scintillation light to the visible. This allows the same liquid to be used as both a passive shielding medium and an active self-shielding detector, allowing lower intrinsic radioactive backgrounds at low energies. Liquid neon is a particularly promising medium for CLEAN. Because liquid neon has a high scintillation yield, has no long-lived radioactive isotopes, and can be easily purified by use of cold traps, it is an ideal medium for the detection of rare nuclear events. In addition, neon is inexpensive, dense...

  15. WINDOW-CLEANING

    CERN Multimedia

    Environmental Section / ST-TFM

    2001-01-01

    The two-month window-cleaning session on the Meyrin, Prévessin and LEP sites will soon begin. The cleaning contractors will work from Monday to Saturday, every week from 4.00 a.m. to 8.00 p.m. The work will be organised so as to disturb users as little as possible. In any event, a work notice will be left in each office 24 hours beforehand. To prevent any damage to documents or items which could occur despite the precautions taken, please clear completely the window-sills and the area immediately around them. If, however, for valid reasons, the work cannot be done on the scheduled day, please inform the Environmental Section by telephoning: 73753 / 74233 / 72242 If you are going to be absent during this two-month period, we should be grateful if you would clear the above mentioned areas before your departure. REMINDER To allow more thorough cleaning of the entrance doors to buildings and also facilitate the weekly work of the cleaning contractors, we ask you to make use of the notice boards at the...

  16. Development Prospect and Proposals on Clean Energy Power Generation in Jiangxi Province%江西省清洁能源发电的发展前景及建议

    Institute of Scientific and Technical Information of China (English)

    钟志勇; 温志华

    2011-01-01

    Development of clean energy is the key to achieve the low-carbon economy, and also a significant move to implement the strategy of Poyang Lake ecological economic zone in Jiangxi province. First, the status quo and prospect of developing clean energy resources of Jiangxi province are analyzed. Then, according to the regional characteristics of Jiangxi which is short of coal and gas, but relatively rich of water, wind and biomass resources, some suggestions are put forward on the strategic measures, technology selection and policy support for clean energy generation, including hydropower, wind power, nuclear power, solar energy, biomass generation and so on, which are expected to provide a reference for improving the proportion of clean energy and achieving the sustainable development in Jiangxi.%发展清洁能源是实现低碳经济的关键,也是江西省实施鄱阳湖生态经济区战略的重要举措。首先分析了江西省清洁能源发电的现状及前景;然后根据江西省缺煤乏气,水资源、风资源及生物质资源相对丰富的地域特征,针对其发展水电、风电、核电、太阳能发电、生物质发电等清洁能源应采取的战略举措、技术选择和政策支持提出了具体意见,以期为提高江西省清洁能源比重、实现绿色崛起提供参考。

  17. Development of environment-friendly weak acid water-based cleaning agent with strong detergency on heavy oil%环保型高效稠油垢弱酸性水基清洗剂的研制

    Institute of Scientific and Technical Information of China (English)

    古蒙蒙; 涂文辉; 桂绍庸; 蔡卫权; 林元虹; 李玉军; 曹宏

    2014-01-01

    采用廉价易得、易生物降解的工业表面活性剂为基本配方、自来水为溶剂,成功地研制出一种温和型高效稠油垢水基清洗剂。通过正交实验、主要活性物含量和清洗剂的浓缩等实验确定室温下其较优配方组成为:磺化琥珀酸二辛酯钠盐4.4%、脂肪醇聚氧乙烯醚硫酸钠4.4%、烷基糖苷6.4%和椰油酸胺丙基甜菜碱7.5%,其去污力高达98.2%。结果说明自制清洗剂的综合清洗性能略优于市售品牌清洗剂1和市售品牌清洗剂2;此外,其 pH值为6.5,呈微弱酸性,这与市售品牌清洗剂偏碱性不同,为新型高效稠油垢水基清洗剂的配制提供了新的思路。%A mild water-based cleaning agent with strong detergency on heavy oil foulant was successfully developed by choosing cheap,easily accessible and biodegradable surfactants as basic ingredients and tap water as solvent. Its key ingredients and the corresponding percentages were determined by orthogonal experiments , the percentage of the main active substance and the concentration of the as-prepared cleaning agent are as follows:sodium diethylhexylsulfosuccinate 4.4%,sodium alcohol ether sulphate 4.4%,alkyl polyglucoside 6.4%,cocoamidopropylbetaine 7.5%, and its detergency rate can reach 98.2% at 25℃. It was concluded that the comprehensive cleaning performance of the as-prepared cleaning agent is better than that of the commercial brand detergent 1 and the commercial brand detergent 2. Moreover,its pH is only 6.5 showing very weak acidity which is different from the traditional cleaning agent showing basic,and thus provides a new idea for the development of novel water-based cleaning agent with strong detergency on heavy oil foulant.

  18. Development and mechanical characterization of porous titanium bone substitutes.

    Science.gov (United States)

    Barbas, A; Bonnet, A-S; Lipinski, P; Pesci, R; Dubois, G

    2012-05-01

    Commercially Pure Porous Titanium (CPPTi) can be used for surgical implants to avoid the stress shielding effect due to the mismatch between the mechanical properties of titanium and bone. Most researchers in this area deal with randomly distributed pores or simple architectures in titanium alloys. The control of porosity, pore size and distribution is necessary to obtain implants with mechanical properties close to those of bone and to ensure their osseointegration. The aim of the present work was therefore to develop and characterize such a specific porous structure. First of all, the properties of titanium made by Selective Laser Melting (SLM) were characterized through experimental testing on bulk specimens. An elementary pattern of the porous structure was then designed to mimic the orthotropic properties of the human bone following several mechanical and geometrical criteria. Finite Element Analysis (FEA) was used to optimize the pattern. A porosity of 53% and pore sizes in the range of 860 to 1500 μm were finally adopted. Tensile tests on porous samples were then carried out to validate the properties obtained numerically and identify the failure modes of the samples. Finally, FE elastoplastic analyses were performed on the porous samples in order to propose a failure criterion for the design of porous substitutes.

  19. Clean Coal Technologies - Accelerating Commerical and Policy Drivers for Deployment

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    Coal is and will remain the world's most abundant and widely distributed fossil fuel. Burning coal, however, can pollute and it produces carbon dioxide. Clean coal technologies address this problem. The widespread deployment of pollution-control equipment to reduce sulphur dioxide, Nox and dust emissions from industry is just one example which has brought cleaner air to many countries. Since the 1970s, various policy and regulatory measures have created a growing commercial market for these clean coal technologies, with the result that costs have fallen and performance has improved. More recently, the need to tackle rising CO2 emissions to address climate change means that clean coal technologies now extend to include those for CO2 capture and storage (CCS). This short report from the IEA Coal Industry Advisory Board (CIAB) presents industry's considered recommendations on how to accelerate the development and deployment of this important group of new technologies and to grasp their very signifi cant potential to reduce emissions from coal use. It identifies an urgent need to make progress with demonstration projects and prove the potential of CCS through government-industry partnerships. Its commercialisation depends upon a clear legal and regulatory framework,public acceptance and market-based financial incentives. For the latter, the CIAB favours cap-and-trade systems, price supports and mandatory feed-in tariffs, as well as inclusion of CCS in the Kyoto Protocol's Clean Development Mechanism to create demand in developing economies where coal use is growing most rapidly. This report offers a unique insight into the thinking of an industry that recognises both the threats and growing opportunities for coal in a carbon constrained world.

  20. Soiling and Cleaning of Polymer Film Solar Reflectors

    Directory of Open Access Journals (Sweden)

    Christopher Sansom

    2016-11-01

    Full Text Available This paper describes the accelerated ageing of commercially available silvered polymer film by contact cleaning using brushes and water in the presence of soiling created by dust and sand particles. These conditions represent cleaning regimes in real concentrating solar power (CSP solar fields in arid environments, where contact cleaning using brushes and water is often required to clean the reflecting surfaces. Whilst suitable for glass reflectors, this paper discusses the effects of these established cleaning processes on the optical and visual characteristics of polymer film surfaces, and then describes the development of a more benign but effective contact cleaning process for cleaning polymer reflectors. The effects of a range of cleaning brushes are discussed, with and without the presence of water, in the presence of sand and dust particles from selected representative locations. The experiments were repeated using different experimental equipment at Plataforma Solar de Almería (PSA in Spain and Cranfield University in the UK. The results highlight differences that are attributable to the experimental methods used. Reflectance measurements and visual inspection show that a soft cleaning brush with a small amount of water, used in a cleaning head with both linear and rotational motion, can clean polymer film reflecting surfaces without inflicting surface damage or reducing specular reflectance.

  1. Development of Virtual Equipment for a Hydraulic Mechanics Experiment

    Institute of Scientific and Technical Information of China (English)

    CHAN Ying-Chieh; CHEN Ya-Hsin; KANG Shih-Chung; LEE Tim-Hau

    2008-01-01

    Laboratory class is very important in the education of hydraulic mechanics. However, it usually requires a high expenditure on equipment purchase and maintenance. Virtual equipment that renders the equipment in a virtual world and provides an interactive interface for users can be an ideal solution to reduce costs. In this research, we focus on developing virtual equipment for a Venturi tube experiment. We em-ployed multiple paper-prototypes to gather user feedback on the preliminary design. Following the final pro-totype, we then implemented the virtual equipment on computers. Interactive functions have been built into the virtual equipment. Users are able to manipulate the equipment and obtain real-time feedback as if they were using actual equipment. The results show that the development of the virtual equipment is technically feasible.

  2. Development and chromosome mechanics in nematodes: Results from IML-1

    Science.gov (United States)

    Nelson, G. A.; Schubert, W. W.; Kazarians, G. A.; Richards, G. F.

    1994-08-01

    A subset of the Caenorhabditis elegans nematodes flown aboard Biorack on IML-1 was analyzed for the fidelity of development and the mechanics of chromosomes at meiosis. To assess meiosis, mutant worms marked at two linked or unlinked loci were inoculated as heterozygous hermaphrodites and allowed to self fertilize. Mendelian segregation ratios and recombination frequency were measured for offspring produced at 1XG or in microgravity. To assess development, worms and embryos were fixed and stained with the DNA dye, DAPI, or antibodies specific for antigens expressed in germ cells, pharyngeal and body wall muscles, and gut cells. The distribution of cytoplasmic determinants, cell nuclei counts and positions were scored to assess symmetry relations and anatomical features.

  3. Development of test methodology for dynamic mechanical analysis instrumentation

    Science.gov (United States)

    Allen, V. R.

    1982-08-01

    Dynamic mechanical analysis instrumentation was used for the development of specific test methodology in the determination of engineering parameters of selected materials, esp. plastics and elastomers, over a broad range of temperature with selected environment. The methodology for routine procedures was established with specific attention given to sample geometry, sample size, and mounting techniques. The basic software of the duPont 1090 thermal analyzer was used for data reduction which simplify the theoretical interpretation. Clamps were developed which allowed 'relative' damping during the cure cycle to be measured for the fiber-glass supported resin. The correlation of fracture energy 'toughness' (or impact strength) with the low temperature (glassy) relaxation responses for a 'rubber-modified' epoxy system was negative in result because the low-temperature dispersion mode (-80 C) of the modifier coincided with that of the epoxy matrix, making quantitative comparison unrealistic.

  4. Development of Natural Gas Fired Combined Cycle Plant for Tri-Generation of Power, Cooling and Clean Water Using Waste Heat Recovery: Techno-Economic Analysis

    OpenAIRE

    Gowtham Mohan; Sujata Dahal; Uday Kumar; Andrew Martin; Hamid Kayal

    2014-01-01

    Tri-generation is one of the most efficient ways for maximizing the utilization of available energy. Utilization of waste heat (flue gases) liberated by the Al-Hamra gas turbine power plant is analyzed in this research work for simultaneous production of: (a) electricity by combining steam rankine cycle using heat recovery steam generator (HRSG); (b) clean water by air gap membrane distillation (AGMD) plant; and (c) cooling by single stage vapor absorption chiller (VAC). The flue gases liber...

  5. Multiscale mechanisms of cell migration during development: theory and experiment.

    Science.gov (United States)

    McLennan, Rebecca; Dyson, Louise; Prather, Katherine W; Morrison, Jason A; Baker, Ruth E; Maini, Philip K; Kulesa, Paul M

    2012-08-01

    Long-distance cell migration is an important feature of embryonic development, adult morphogenesis and cancer, yet the mechanisms that drive subpopulations of cells to distinct targets are poorly understood. Here, we use the embryonic neural crest (NC) in tandem with theoretical studies to evaluate model mechanisms of long-distance cell migration. We find that a simple chemotaxis model is insufficient to explain our experimental data. Instead, model simulations predict that NC cell migration requires leading cells to respond to long-range guidance signals and trailing cells to short-range cues in order to maintain a directed, multicellular stream. Experiments confirm differences in leading versus trailing NC cell subpopulations, manifested in unique cell orientation and gene expression patterns that respond to non-linear tissue growth of the migratory domain. Ablation experiments that delete the trailing NC cell subpopulation reveal that leading NC cells distribute all along the migratory pathway and develop a leading/trailing cellular orientation and gene expression profile that is predicted by model simulations. Transplantation experiments and model predictions that move trailing NC cells to the migratory front, or vice versa, reveal that cells adopt a gene expression profile and cell behaviors corresponding to the new position within the migratory stream. These results offer a mechanistic model in which leading cells create and respond to a cell-induced chemotactic gradient and transmit guidance information to trailing cells that use short-range signals to move in a directional manner.

  6. High-voltage live cleaning robot design based on security

    Institute of Scientific and Technical Information of China (English)

    XIE Xiao-peng; XIA Hong-wei; YANG Ru-qing

    2005-01-01

    High-Voltage Live Cleaning Robot works in a hot-line environment (220 kV/330 kV), and so the safety of its application and equipment is most important. In terms of safety, the designs of robot mechanism and control system have been discussed, and the test data are given regarding the control system of a model machine. The model machine of a high-voltage live cleaning robot can satisfy the needs of basic cleaning in common conditions. From manual operation to automation, the cleaning efficiency is improved. The robot can decrease the amount of work, and guarantee security. Among high-voltage live cleaning equipment in China, the cleaning robot is advanced in automation and intelligence.

  7. Northwest Region Clean Energy Application Center

    Energy Technology Data Exchange (ETDEWEB)

    Sjoding, David

    2013-09-30

    The main objective of the Northwest Clean Energy Application Center (NW CEAC) is to promote and support implementation of clean energy technologies. These technologies include combined heat and power (CHP), district energy, waste heat recovery with a primary focus on waste heat to power, and other related clean energy systems such as stationary fuel cell CHP systems. The northwest states include AK, ID, MT, OR, and WA. The key aim/outcome of the Center is to promote and support implementation of clean energy projects. Implemented projects result in a number of benefits including increased energy efficiency, renewable energy development (when using opportunity fuels), reduced carbon emissions, improved facility economics helping to preserve jobs, and reduced criteria pollutants calculated on an output-based emissions basis. Specific objectives performed by the NW CEAC fall within the following five broad promotion and support categories: 1) Center management and planning including database support; 2) Education and Outreach including plan development, website, target market workshops, and education/outreach materials development 3) Identification and provision of screening assessments & feasibility studies as funded by the facility or occasionally further support of Potential High Impact Projects; 4) Project implementation assistance/trouble shooting; and 5) Development of a supportive clean energy policy and initiative/financing framework.

  8. IDEA Clean Energy Application Center

    Energy Technology Data Exchange (ETDEWEB)

    Thornton, Robert

    2013-09-30

    The DOE Clean Energy Application Centers were launched with a goal of focusing on important aspects of our nation’s energy supply including Efficiency, Reliability and Resiliency. Clean Energy solutions based on Combined Heat & Power (CHP), District Energy and Waste Heat Recovery are at the core of ensuring a reliable and efficient energy infrastructure for campuses, communities, and industry and public enterprises across the country. IDEA members which include colleges and universities, hospitals, airports, downtown utilities as well as manufacturers, suppliers and service providers have long-standing expertise in the planning, design, construction and operations of Clean Energy systems. They represent an established base of successful projects and systems at scale and serve important and critical energy loads. They also offer experience, lessons learned and best practices which are of immense value to the sustained growth of the Clean Energy sector. IDEA has been able to leverage the funds from the project award to raise the visibility, improve the understanding and increase deployment CHP, District Energy and Waste Heat Recovery solutions across the regions of our nation, in collaboration with the regional CEAC’s. On August 30, 2012, President Obama signed an Executive Order to accelerate investments in industrial energy efficiency (EE), including CHP and set a national goal of 40 GW of new CHP installation over the next decade IDEA is pleased to have been able to support this Executive Order in a variety of ways including raising awareness of the goal through educational workshops and Conferences and recognizing the installation of large scale CHP and district energy systems A supporting key area of collaboration has involved IDEA providing technical assistance on District Energy/CHP project screenings and feasibility to the CEAC’s for multi building, multi-use projects. The award was instrumental in the development of a first-order screening

  9. Strategic planning as a regional development policy mechanism: European context

    Directory of Open Access Journals (Sweden)

    Vasilevska Ljiljana

    2009-01-01

    Full Text Available The increasing interest in a strategic approach to space arrangement at all levels, and particularly on the intra and interregional level, as well as the changes in the area of spatial and regional planning, are some of the basic characteristics of theoretical and practical activities and efforts undertaken and realized in the field of organization and arrangement of space in the European Union during recent decades. Strategic planning gained importance in the framework of those changes, particularly owing to the growth of the environmental complex and sustainable growth planning, but also because of the need for a higher security of markets and states. Strategic spatial planning can be defined as a quite diverse planning activity. It is considered that 'new' strategic planning will not represent a return to comprehensive planning, but will rather be a combination of traditional and new approaches to planning of sustainable development where an integrative role will be progressively assumed by spatial and regional plans and programs. Apart from a review of the development of strategic planning, this paper considers the importance and role of strategic planning as a mechanism of regional development and 'new' regional politics, based on the contemporary development of critical thinking and practical experiences in the European Union.

  10. A Reformed CDM - including new mechanisms for sustainable development

    Energy Technology Data Exchange (ETDEWEB)

    Holm Olsen, K.; Fenhann, J.

    2009-07-01

    The annual CD4CDM Perspectives Series features a topic of pivotal importance to the global carbon market. The series seeks to communicate the diverse insights and visions of leading actors in the carbon market to better inform the decisions of professionals and policymakers in developing countries. The second theme of the series focuses on how the CDM can be reformed in a post-2012 climate regime, including new mechanism for sustainable development. Seventeen contributors from the private sector, Designated National Authorities, the Executive Board, research, and development agencies present their perspective on meeting challenges such as the unequal regional distribution of CDM projects, concerns about environmental integrity and technology transfer, complex governance procedures, and questions about the CDM's contribution to sustainable development. The new ideas and solutions to these challenges proposed by the authors in this edition of Perspectives have been solicited to help professionals and policy makers make the best decisions in the lead-up to COP 15 in Copenhagen and beyond. (au)

  11. Electromagnetically Clean Solar Arrays

    Science.gov (United States)

    Stem, Theodore G.; Kenniston, Anthony E.

    2008-01-01

    The term 'electromagnetically clean solar array' ('EMCSA') refers to a panel that contains a planar array of solar photovoltaic cells and that, in comparison with a functionally equivalent solar-array panel of a type heretofore used on spacecraft, (1) exhibits less electromagnetic interferences to and from other nearby electrical and electronic equipment and (2) can be manufactured at lower cost. The reduction of electromagnetic interferences is effected through a combination of (1) electrically conductive, electrically grounded shielding and (2) reduction of areas of current loops (in order to reduce magnetic moments). The reduction of cost is effected by designing the array to be fabricated as a more nearly unitary structure, using fewer components and fewer process steps. Although EMCSAs were conceived primarily for use on spacecraft they are also potentially advantageous for terrestrial applications in which there are requirements to limit electromagnetic interference. In a conventional solar panel of the type meant to be supplanted by an EMCSA panel, the wiring is normally located on the back side, separated from the cells, thereby giving rise to current loops having significant areas and, consequently, significant magnetic moments. Current-loop geometries are chosen in an effort to balance opposing magnetic moments to limit far-0field magnetic interactions, but the relatively large distances separating current loops makes full cancellation of magnetic fields problematic. The panel is assembled from bare photovoltaic cells by means of multiple sensitive process steps that contribute significantly to cost, especially if electomagnetic cleanliness is desired. The steps include applying a cover glass and electrical-interconnect-cell (CIC) sub-assemble, connecting the CIC subassemblies into strings of series-connected cells, laying down and adhesively bonding the strings onto a panel structure that has been made in a separate multi-step process, and mounting the

  12. Clean Energy Solutions Center Services

    Energy Technology Data Exchange (ETDEWEB)

    2016-03-01

    The Solutions Center offers no-cost expert policy assistance, webinars and training forums, clean energy policy reports, data, and tools provided in partnership with more than 35 leading international and regional clean energy organizations.

  13. Development of environment-friendly water-based cleaning agent for heavy oil foulant in kitchen ventilator with high detergency%高效油烟机重油垢环保型水基清洗剂的研制

    Institute of Scientific and Technical Information of China (English)

    李玉军; 蔡卫权; 宋素娟; 王文; 曹宏

    2013-01-01

    An efficient,environmentally safe and low-cost novel water-based cleaning agent was successfully developed for the heavy oil foulant in kitchen ventilator. Based on the orthogonal experiment with 7 factors and 3 levels of L18 (37),the optimal ingredients and their mass percentage of the cleaning agent are as follows:a certain anionic surfactant F 4%,APG 3.5%,AEO-91%,LAS 0.5%, sodium citrate 1%, triethanolamine 3%. Detergency of the cleaning agent and the commercial multi-purpose cleaning agent for kitchen were comparatively studied with dilution ratio of (0-10)∶1 at the temperatures of 10℃ and 30℃,respectively. It was found that the former has much higher decontamination rate than that of the latter,and its decontamination rate is still more than 90% with dilution ratio of 10∶1. The as-prepared cleaning agent from cheap industrial raw materials is applicable in a wide temperature range,with excellent comprehensive cleaning performance and simple preparation process,and shows a good application prospect.%  针对油烟机重油垢的特点,成功研制了高效、环保安全的低成本新型水基清洗剂。7因素、3水平的L18(37)正交实验确定其最佳配方组成为:4%阴离子型表面活性剂 F、3.5%烷基糖苷、1.0%脂肪醇聚氧乙烯醚硫酸钠、0.5%十二烷基苯磺酸钠、1%柠檬酸钠和3%三乙醇胺。进一步在10℃和30℃下对比研究了自制清洗剂和市售某品牌厨房多用清洗剂稀释0~10倍的去污力,前者明显优于后者,且稀释10倍后的去污力仍高达90%以上。本研究从廉价的工业品原料制备的近中性水基清洗剂适用温度范围较宽,综合清洗性能优异,且制备工艺简单,具有广泛的应用前景。

  14. Sustainable Development Impacts of NAMAs: An integrated approach to assessment of co-benefits based on experience with the CDM

    DEFF Research Database (Denmark)

    Olsen, Karen Holm

    Sustainable development priorities provide the context for Nationally Appropriate Mitigation Actions (NAMAs) by developing countries. While methods exist to assess the sustainable development (SD) co-benefits of Clean Development Mechanism (CDM) projects, no approach has yet been developed...

  15. Scaleable Clean Aluminum Melting Systems

    Energy Technology Data Exchange (ETDEWEB)

    Han, Q.; Das, S.K. (Secat, Inc.)

    2008-02-15

    The project entitled 'Scaleable Clean Aluminum Melting Systems' was a Cooperative Research and Development Agreements (CRADAs) between Oak Ridge National Laboratory (ORNL) and Secat Inc. The three-year project was initially funded for the first year and was then canceled due to funding cuts at the DOE headquarters. The limited funds allowed the research team to visit industrial sites and investigate the status of using immersion heaters for aluminum melting applications. Primary concepts were proposed on the design of furnaces using immersion heaters for melting. The proposed project can continue if the funding agency resumes the funds to this research. The objective of this project was to develop and demonstrate integrated, retrofitable technologies for clean melting systems for aluminum in both the Metal Casting and integrated aluminum processing industries. The scope focused on immersion heating coupled with metal circulation systems that provide significant opportunity for energy savings as well as reduction of melt loss in the form of dross. The project aimed at the development and integration of technologies that would enable significant reduction in the energy consumption and environmental impacts of melting aluminum through substitution of immersion heating for the conventional radiant burner methods used in reverberatory furnaces. Specifically, the program would couple heater improvements with furnace modeling that would enable cost-effective retrofits to a range of existing furnace sizes, reducing the economic barrier to application.

  16. Present situation and suggestion for clean coal development and utilization in China%我国煤炭清洁开发利用现状及发展建议

    Institute of Scientific and Technical Information of China (English)

    陆小泉

    2016-01-01

    Combining with the energy resource structure of China, which is rich in coal, but poor in petroleum and natural gas, the paper analyzed the experience of clean coal development and utilization in foreign countries, and summarized China's current situation and development trend of safety and green coal mining, coal upgrading and processing, clean-burning and efficient power generation, deep processing and conversion, pollution control and CO2 emission reduction. Based on the analysis, this paper proposes suggestions for clean coal development and utilization in China, including: controlling the exploitation of coal mining, and improve the scientific production capacity; improving the level of technology and equipment of coal exploitation and utilization; promoting the demonstration projects of clean coal processing and conversion; strengthening the policy support of clean coal development and utilization.%结合我国“富煤、贫油、少气”的能源禀赋特点和能源利用现状,分析了国外煤炭清洁开发利用的经验,总结了我国煤炭安全绿色开采、提质加工、清洁燃烧与高效发电、深加工转化、污染物控制及CO2减排技术等方面的现状及发展趋势,进一步提出了我国煤炭清洁开发利用的发展建议:严控煤炭开发速度,提高煤炭科学产能;全面提升煤炭清洁开发利用的科技与装备水平;稳步推进煤炭清洁加工和转化的工程示范;加强煤炭清洁开发利用政策支持力度。

  17. Multi-stage cleaning plant

    Energy Technology Data Exchange (ETDEWEB)

    Kullendorff, A.; Wikner, J.

    1980-12-09

    A cleaning plant positioned within an annular fluidized bed combustion chamber is divided into a plurality of separate cleaning stages, wherein a first stage is located adjacent the fluidized bed and additional stages are arranged within the first stage. Each stage comprises a plurality of separate cleaning devices which act in parallel, while cleaning devices of different stages act in series to remove debris from the combustion gases that exit from the fluidized bed combustion chamber.

  18. Development of Numerical Analysis Techniques Based on Damage Mechanics and Fracture Mechanics

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Yoon Suk; Lee, Dock Jin; Choi, Shin Beom; Kim, Sun Hye; Cho, Doo Ho; Lee, Hyun Boo [Sungkyunkwan University, Seoul (Korea, Republic of)

    2010-04-15

    The scatter of measured fracture toughness data and transferability problems among different crack configurations as well as geometry and loading conditions are major obstacles for application of fracture mechanics. To address these issues, recently, concerns on the local approach employing reliable micro-mechanical damage models are being increased again in connection with a progress of computational technology. In the present research, as part of development of fracture mechanical evaluation model for material degradation of reactor pressure boundary, several investigations on fracture behaviors were carried out. Especially, a numerical scheme to determine key parameters consisting both cleavage and ductile fracture estimate models was changed efficiently by incorporating a genetic algorithm. Also, with regard to the well-known master curve, newly reported methods such as bimodal master curve, randomly inhomogeneous master curve and single point estimation were reviewed to deal with homogeneous and inhomogeneous material characteristics. A series of preliminary finite element analyses was conducted to examine the element size effect on micro-mechanical models. Then, a new thickness correction equation was derived from parametric three-dimensional numerical simulations, which was founded on the current test standard, ASTM E1921, but could lead to get more realistic fracture toughness values. As a result, promising modified master curves as well as fracture toughness diagrams to convert data between pre-cracked V-notched and compact tension specimens were generated. Moreover, a user-subroutine in relation to GTN(Gurson-Tvergaard-Needleman) model was made by adopting Hill's 48 yield potential theory. By applying GTN model combined with the subroutine to small punch specimens, the effect of inhomogeneous properties on fracture behaviors of miniature specimens was confirmed. Therefore, it is anticipated that the aforementioned enhanced research results can be

  19. Cleaning of Free Machining Brass

    Energy Technology Data Exchange (ETDEWEB)

    Shen, T

    2005-12-29

    We have investigated four brightening treatments proposed by two cleaning vendors for cleaning free machining brass. The experimental results showed that none of the proposed brightening treatments passed the swipe test. Thus, we maintain the recommendation of not using the brightening process in the cleaning of free machining brass for NIF application.

  20. Paint removal and surface cleaning using ice particles

    Science.gov (United States)

    Foster, Terry; Visaisouk, S.

    1995-04-01

    Research into the possibility of using ice particles as a blast medium was first initiated at Defence Research Establishment Pacific (DREP) in an effort to develop a more environmentally acceptable paint removal method. A paint removal process was also required that could be used in areas where normal grit blasting could not be used due to the possibility of the residual blasting grit contaminating machinery and other equipment. As a result of this research a commercial ice blasting system was developed by RETECH. This system is now being used to remove paint from substrates that cannot be easily blasted by conventional techniques and also to clean soiled or contaminated surfaces. The problems involved in the development of an ice blast system and its components and their functions are described. Due to the complexity of paint removal using ice blasting, parameters such as air pressure, ice particle size and ice particle flow rate were studied and adjusted to suit the nature of the particular coating and substrate of interest. The mechanism of paint removal by ice particles has also been investigated. A theoretical model has been developed to explain the different paint removal mechanisms such as erosion by abrasion and erosion by fracture as they relate to ice blasting. Finally, the use of ice blasting to removal paint from a variety of substrates is presented as well as examples of surface cleaning and surface decontamination.

  1. Hydrogen utilization international clean energy system (WE-NET). Subtask 8. Development of hydrogen combustion turbines (development of combustion control technology); Suiso riyo kokusai clean energy system (WE-NET). Subtask 8. Suiso nensho turbine no kaihatsu nensho seigyo gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The paper described the fiscal 1996 developmental results of hydrogen burning turbine combustion technology in the hydrogen utilization international clean energy system (WE-NET) project. A test was conducted on an annular type combustor where oxygen is mixed with steam (inert gas) at burner and fired with hydrogen. Appropriate flame shape and cooling/dilution vapor distribution were attempted, and various data on combustion were measured for improvement. Mixture and flame holding were improved by developing a can type combustor (1) where oxygen is diluted with steam after firing oxygen and hydrogen around burner and by strengthening circulation in the combustor. Improvement such as appropriate steam distribution, etc. is needed. A can type combustor (2) was tested in which the premixed oxygen and hydrogen is supplied from scoop and fired with hydrogen. By supplying part of oxygen from the primary scoop, the residual hydrogen and oxygen concentration around the stoichiometric ratio can be reduced. Concentration of the residual oxygen can be measured by the absorption light method, but it is difficult to adopt the non-contact measuring method to hydrogen. An outlook for the gas temperature measuring method was obtained. 12 refs., 121 figs., 27 tabs.

  2. A Clean Market

    Institute of Scientific and Technical Information of China (English)

    MAGGIECHEN

    2004-01-01

    If you have US$1 million, do you invest in car production or cleaning car emissions? More cars than ever are hitting the roads and demand is rising.Cleaner cars are being called for, as the government strives to reduce car emission. So there is an obvious market both for cars and for new emission control technologies.Theoretically, you should make money by investing in either of them in China today.

  3. Molecular and cellular mechanisms of aldosterone producing adenoma development

    Directory of Open Access Journals (Sweden)

    Sheerazed eBoulkroun

    2015-06-01

    Full Text Available Primary aldosteronism (PA is the most common form of secondary hypertension with an estimated prevalence of ~10% in referred patients. PA occurs as a result of a dysregulation of the normal mechanisms controlling adrenal aldosterone production. It is characterized by hypertension with low plasma renin and elevated aldosterone and often associated with hypokalemia. The two major causes of PA are unilateral aldosterone producing adenoma (APA and bilateral adrenal hyperplasia, accounting together for ~95% of cases. In addition to the well-characterized effect of excess mineralocorticoids on blood pressure, high levels of aldosterone also have cardiovascular, renal and metabolic consequences. Hence, long-term consequences of PA include increased risk of coronary artery disease, myocardial infarction, heart failure and atrial fibrillation. Despite recent progress in the management of patients with PA, critical issues related to diagnosis, subtype differentiation and treatment of non-surgically correctable forms still persist. A better understanding of the pathogenic mechanisms of the disease should lead to the identification of more reliable diagnostic and prognostic biomarkers for a more sensitive and specific screening and new therapeutic options. In this review we will summarize our current knowledge on the molecular and cellular mechanisms of APA development. On one hand, we will discuss how various animal models have improved our understanding of the pathophysiology of excess aldosterone production. On the other hand, we will summarize the major advances made during the last few years in the genetics of APA due to transcriptomic studies and whole exome sequencing. The identification of recurrent and somatic mutations in genes coding for ion channels (KCNJ5 and CACNA1D and ATPases (ATP1A1 and ATP2B3 allowed highlighting the central role of calcium signaling in autonomous aldosterone production by the adrenal.

  4. Development of mechanical design technology for integral reactor

    Energy Technology Data Exchange (ETDEWEB)

    Park, Keun Bae; Choi, Suhn; Kim, Kang Soo; Kim, Tae Wan; Jeong, Kyeong Hoon; Lee, Gyu Mahn

    1999-03-01

    While Korean nuclear reactor strategy seems to remain focused on the large capacity power generation, it is expected that demand of small and medium size reactor will arise for multi-purpose application such as small capacity power generation, co-generation and sea water desalination. With this in mind, an integral reactor SMART is under development. Design concepts, system layout and types of equipment of integral reactor are significantly different from those of loop type reactor. Conceptual design development of mechanical structures of integral reactor SMART is completed through the first stage of the project. Efforts were endeavored for the establishment of design basis and evaluation of applicable codes and standards. Design and functional requirements of major structural components were setup, and three dimensional structural modelling of SMART reactor vessel assembly was prepared. Also, maintenance and repair scheme as well as preliminary fabricability evaluation were carried out. Since small integral reactor technology includes sensitive technologies and know-how's, it is hard to achieve systematic and comprehensive technology transfer from nuclear-advanced countries. Thus, it is necessary to develop the related design technology and to verify the adopted methodologies through test and experiments in order to assure the structural integrity of reactor system. (author)

  5. Clean steels for fusion

    Energy Technology Data Exchange (ETDEWEB)

    Gelles, D.S.

    1995-03-01

    Fusion energy production has an inherent advantage over fission: a fuel supply with reduced long term radioactivity. One of the leading candidate materials for structural applications in a fusion reactor is a tungsten stabilized 9% chromium Martensitic steel. This alloy class is being considered because it offers the opportunity to maintain that advantage in the reactor structure as well as provide good high temperature strength and radiation induced swelling and embrittlement resistance. However, calculations indicate that to obtain acceptable radioactivity levels within 500 years after service, clean steel will be required because the niobium impurity levels must be kept below about 2 appm and nickel, molybdenum, nitrogen, copper, and aluminum must be intentionally restricted. International efforts are addressing the problems of clean steel production. Recently, a 5,000 kg heat was vacuum induction melted in Japan using high purity commercial raw materials giving niobium levels less than 0.7 appm. This paper reviews the need for reduced long term radioactivity, defines the advantageous properties of the tungsten stabilized Martensitic steel class, and describes the international efforts to produce acceptable clean steels.

  6. Development of brain mechanisms for processing affective touch

    Directory of Open Access Journals (Sweden)

    Malin eBjornsdotter

    2014-02-01

    Full Text Available Affective tactile stimulation plays a key role in the maturation of neural circuits, but the development of brain mechanisms processing touch is poorly understood. We therefore used functional magnetic resonance imaging (fMRI to study brain responses to soft brush stroking of both glabrous (palm and hairy (forearm skin in healthy children (5-13 years, adolescents (14-17 years and adults (25-35 years. Adult-defined regions-of-interests in the primary somatosensory cortex (SI, secondary somatosensory cortex (SII, insular cortex and right posterior superior temporal sulcus (pSTS were significantly and similarly activated in all age groups. Whole-brain analyses revealed that responses in the ipsilateral SII were positively correlated with age in both genders, and that responses in bilateral regions near the pSTS correlated significantly and strongly with age in females but not in males. These results suggest that brain mechanisms associated with both sensory-discriminative and affective-motivational aspects of touch are largely established in school-aged children, and that there is a general continuing maturation of SII and a female-specific increase in pSTS sensitivity with age. Our work establishes a groundwork for future comparative studies of tactile processing in developmental disorders characterized by disrupted social perception such as autism.

  7. [Development of the Cartesian "Mechanics of vision" and its limits].

    Science.gov (United States)

    Hagner, M

    1990-01-01

    In his "Objections and Replies" to the "Meditations" Descartes developed a concept of sensory perception as a three-stage mechanism. Firstly, it consists of a purely mechanical process which comprises an excitation of the sensory organs leading to motion in the nerves. Secondly, he understood perception as a psychophysical interaction in which a specific signal pattern representing the surroundings is presented to the soul. Finally, in stage three, classification and judgement of the object presented complete the perceptual process. Ernst Cassirer suggests that Descartes' conception of the soul is elucidated more precisely in his physiological writings, in which physiology is considered as a field for the application of philosophical analysis. In the present paper an attempt is made to demonstrate that Descartes' mechanistic concept of vision led to a definition of perception as a active process within the soul. Based on Kepler's theory of the inverted retinal image and a rejection of the traditional idea of light generated within the eye, Descartes arrived at the hypothesis that one must strictly differentiate between the object image and its perceptual correlate. Since the objective physical conditions do not suffice for a complete understanding of perception, a restricted validity of the mechanistic theory of vision is the consequence. Thus Descartes transposed the question of perception as an active process from neurophysiology to psychology and established its relevance within his own metaphysics, hereby laying the foundations for a psychological discussion of theories of vision in British Sensism.

  8. International Clean Energy System Using Hydrogen Conversion (WE-NET). subtask 4. Development of hydrogen production technology; Suiso riyo kokusai clean energy system gijutsu (WE-NET). subtask 4. Suiso seizo gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This paper describes development of hydrogen production technology as a part of the WE-NET project. For the solid polymer water electrolysis method higher in efficiency and lower in cost than the previous methods, 5 companies have developed element technologies for improving electrolysis cells and synthesis technologies of hot solid polymer electrolyte based on each proper catalyst electrode production method. In fiscal 1996, the initial study on large-scale systems by middle laboratory cells was made as well as improvement of electrolysis performance by small laboratory cells and endurance tests. Among the previous methods such as a hot press method (bonding of an ion exchange membrane to an electrode), an electroless plating method (preparation of porous surface onto a membrane electrode assembly), a zero gap method (preparation of high-efficiency high-current density cells), and a sintered porous electrode method (carrying of the mixture of catalytic powder and ion exchange resin-dissipated solution onto sintered metallic porous electrode surface), the former two methods were adopted for development of bench-scale cells as effective promising methods. 192 refs., 183 figs., 108 tabs.

  9. National Alliance for Clean Energy Incubators New Mexico Clean Energy Incubator

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, Suzanne S.

    2004-12-15

    The National Alliance for Clean Energy Incubators was established by the National Renewable Energy Laboratory (NREL) to develop an emerging network of business incubators for entrepreneurs specializing in clean energy enterprises. The Alliance provides a broad range of business services to entrepreneurs in specific geographic locales across the U.S. and in diverse clean energy technology areas such as fuel cells, alternative fuels, power generation, and renewables, to name a few. Technology Ventures Corporation (TVC) participates in the Alliance from its corporate offices in Albuquerque, NM, and from its sites in Northern and Southern New Mexico, California, and Nevada. TVC reports on the results of its attempts to accelerate the growth and success of clean energy and energy efficiency companies through its array of business support services. During the period from September 2002 through September 2004, TVC describes contributions to the Alliance including the development of 28 clients and facilitating capital raises exceeding $35M.

  10. Research and Development of Growth Design System for Mechanical Products

    Institute of Scientific and Technical Information of China (English)

    YANG Bo; ZE Xiangbo; YANG Tao; CUI Weihua; LIU Luning

    2006-01-01

    By applying genetic engineering methodology into the incremental product growth design, a generic structural design approach is put forward, as well as an intelligent evolution strategy of the product units growth, which is based on the multilevel Decomposition and Reconstruction of product gene. To guarantee a successful transformation from functional requirement to geometry constraints between parts in the incremental growth design of mechanical product, the integrated design method incorporates the design requirements and assembly perspective into product genetic information. The mathematical model of state transition during incremental design process are given at first, based on which product can grow step by step from functional requirement to the final geometrical product structure automatically. And then, to quantify the measurement of assembly efficiency, a mathematical model as well as a technology to quantify assembly constraints was developed by application of some fuzzy logic algorithms. Finally, examples have been proved that the approach is promising.

  11. Robust self-cleaning surfaces that function when exposed to either air or oil

    Science.gov (United States)

    Lu, Yao; Sathasivam, Sanjayan; Song, Jinlong; Crick, Colin R.; Carmalt, Claire J.; Parkin, Ivan P.

    2015-03-01

    Superhydrophobic self-cleaning surfaces are based on the surface micro/nanomorphologies; however, such surfaces are mechanically weak and stop functioning when exposed to oil. We have created an ethanolic suspension of perfluorosilane-coated titanium dioxide nanoparticles that forms a paint that can be sprayed, dipped, or extruded onto both hard and soft materials to create a self-cleaning surface that functions even upon emersion in oil. Commercial adhesives were used to bond the paint to various substrates and promote robustness. These surfaces maintained their water repellency after finger-wipe, knife-scratch, and even 40 abrasion cycles with sandpaper. The formulations developed can be used on clothes, paper, glass, and steel for a myriad of self-cleaning applications.

  12. Repellent materials. Robust self-cleaning surfaces that function when exposed to either air or oil.

    Science.gov (United States)

    Lu, Yao; Sathasivam, Sanjayan; Song, Jinlong; Crick, Colin R; Carmalt, Claire J; Parkin, Ivan P

    2015-03-06

    Superhydrophobic self-cleaning surfaces are based on the surface micro/nanomorphologies; however, such surfaces are mechanically weak and stop functioning when exposed to oil. We have created an ethanolic suspension of perfluorosilane-coated titanium dioxide nanoparticles that forms a paint that can be sprayed, dipped, or extruded onto both hard and soft materials to create a self-cleaning surface that functions even upon emersion in oil. Commercial adhesives were used to bond the paint to various substrates and promote robustness. These surfaces maintained their water repellency after finger-wipe, knife-scratch, and even 40 abrasion cycles with sandpaper. The formulations developed can be used on clothes, paper, glass, and steel for a myriad of self-cleaning applications.

  13. Clean Mechanism Design and Finite-Element Analysis of Multifunctional Bed%多功能护理床洁便机构设计与有限元分析

    Institute of Scientific and Technical Information of China (English)

    陈磊; 张华; 刘继忠; 周祖茗; 刘兴

    2013-01-01

    It designed a kind of clean mechanism and its control circuits, which can be used in multifunctional bed and intelligent wheelchair. Briefly it described the main structure and function of multifunctional bed, using SolidWorks software which established the institutions model of cover opening and closing mechanism, cover opening and closing mechanism, elevating and urine and processor, based on the drive of motor and electric push rod requirements, it integrated H bridge chip BTS7960B to realize the motor reversing and speed control, and completed the design of control circuit, and through using ANSYS finite element analysis of the main force of components, in the premise of meeting the rated force requirements, it ensured the safe operation of the agencies, and then achieved the expected design requirement, which had verified the feasibility of the design.%设计了一种可用于多功能护理床和智能轮椅床上的洁便机构及其控制电路.对护理床的主要结构和功能进行简要描述,运用SolidWorks软件建立起便盖启闭机构、升降机构以及尿便处理器的三维模型;基于电机及电动推杆驱动的要求,采用集成H桥芯片BTS7960B实现对电机正反转和转速的控制,完成控制电路的设计;采用ANSYS对主要承力部件进行有限元分析,在满足额定受力要求的前提下,确保机构能够安全运行,进而实现各项预定设计指标,从而验证了设计的可行性.

  14. TRENDS IN OFFICIAL DEVELOPMENT ASSISTANCE TO DEVELOPING COUNTRIES AND POSSIBILITIES OF ALTERNATIVE FINANCING MECHANISMS

    Directory of Open Access Journals (Sweden)

    Talknice Saungweme

    2013-09-01

    Full Text Available The study analyses trends in Official Development Assistance (ODA to developing countries, mainly Africa, and possibilities of new financing instruments. Economies of most developing countries, especially those in Sub-Saharan Africa, are characterised by low investment flows, huge import bills and lower exports. Subsequently, development assistance is the major source of external finance and has taken the form of budget support, humanitarian and development finance. However, the noted fall in ODA in 2005, 2009 and 2012 might adversely impact directly on the attainment of millennium development goals in 2015. This negative trend in ODA is a result of a combination of factors such as economic constraints in the donor countries (for example, the debt crisis and/or a new shift in financing mechanisms to developing countries.

  15. Appalachian clean coal technology consortium

    Energy Technology Data Exchange (ETDEWEB)

    Kutz, K.; Yoon, Roe-Hoan [Virginia Polytechnic Institute and State Univ., Blacksburg, VA (United States)

    1995-11-01

    The Appalachian Clean Coal Technology Consortium (ACCTC) has been established to help U.S. coal producers, particularly those in the Appalachian region, increase the production of lower-sulfur coal. The cooperative research conducted as part of the consortium activities will help utilities meet the emissions standards established by the 1990 Clean Air Act Amendments, enhance the competitiveness of U.S. coals in the world market, create jobs in economically-depressed coal producing regions, and reduce U.S. dependence on foreign energy supplies. The research activities will be conducted in cooperation with coal companies, equipment manufacturers, and A&E firms working in the Appalachian coal fields. This approach is consistent with President Clinton`s initiative in establishing Regional Technology Alliances to meet regional needs through technology development in cooperation with industry. The consortium activities are complementary to the High-Efficiency Preparation program of the Pittsburgh Energy Technology Center, but are broader in scope as they are inclusive of technology developments for both near-term and long-term applications, technology transfer, and training a highly-skilled work force.

  16. Clean Coal Program Research Activities

    Energy Technology Data Exchange (ETDEWEB)

    Larry Baxter; Eric Eddings; Thomas Fletcher; Kerry Kelly; JoAnn Lighty; Ronald Pugmire; Adel Sarofim; Geoffrey Silcox; Phillip Smith; Jeremy Thornock; Jost Wendt; Kevin Whitty

    2009-03-31

    Although remarkable progress has been made in developing technologies for the clean and efficient utilization of coal, the biggest challenge in the utilization of coal is still the protection of the environment. Specifically, electric utilities face increasingly stringent restriction on the emissions of NO{sub x} and SO{sub x}, new mercury emission standards, and mounting pressure for the mitigation of CO{sub 2} emissions, an environmental challenge that is greater than any they have previously faced. The Utah Clean Coal Program addressed issues related to innovations for existing power plants including retrofit technologies for carbon capture and sequestration (CCS) or green field plants with CCS. The Program focused on the following areas: simulation, mercury control, oxycoal combustion, gasification, sequestration, chemical looping combustion, materials investigations and student research experiences. The goal of this program was to begin to integrate the experimental and simulation activities and to partner with NETL researchers to integrate the Program's results with those at NETL, using simulation as the vehicle for integration and innovation. The investigators also committed to training students in coal utilization technology tuned to the environmental constraints that we face in the future; to this end the Program supported approximately 12 graduate students toward the completion of their graduate degree in addition to numerous undergraduate students. With the increased importance of coal for energy independence, training of graduate and undergraduate students in the development of new technologies is critical.

  17. Unit for cleaning drilling muds

    Energy Technology Data Exchange (ETDEWEB)

    Dorosh, M.M.; Dera, Ya.I.; Fesenko, M.M.; Makedonov, N.I.; Surkov, V.T.

    1983-01-01

    A design is proposed for a unit for cleaning drilling muds which includes a settling tank with input sleeve and a sleeve of the purified mud and hydrocyclones. In order to improve the effectiveness of the degree of purification, the unit is equipped with an ejector and sludge filter arranged under the settling tank in the form of a grid installed in the upper part of the settling tank and connected to the sleeve of purified mud, while the inlet sleeve is arranged tangentially. The proposed unit can operate during drilling with the use of muds on water and carbon bases. As a result of its use, the degree of purification of the drilling mud reaches 30-35%; there is an increase in mechanical drilling rate, the service life of the sand-separator and the silt separators and decrease in wear of the pump equipment.

  18. EUV mask cleans comparison of frontside and dual-sided concurrent cleaning

    Science.gov (United States)

    Cheong, Lin Lee; Kindt, Louis; Turley, Christina; Leonhard, Dusty; Boyle, John; Robinson, Chris; Rankin, Jed; Corliss, Daniel

    2015-03-01

    The cleaning requirements for EUV masks are more complex than optical masks due to the absence of available EUVcompatible pellicles. EUV masks must therefore be capable of undergoing more than 100 cleaning cycles with minimum impact to lithographic performance. EUV masks are created on substrates with 40 multilayers of silicon and molybdenum to form a Bragg reflector, capped with a 2.5nm-thick ruthenium layer and a tantalum-based absorber; during usage, both ruthenium and absorber are exposed to the cleaning process. The CrN layer on the backside is used to enable electrostatic clamping. This clamp side must also be free of particles that could impact printing and overlay, and particles could also potentially migrate to the frontside and create defects. Thus, the cleaning process must provide decent particle removal efficiencies on both front- and backside while maintaining reflectivity with minimal surface roughness change. In this paper, we report progress developing a concurrent patterned-side and clamped-side cleaning process that achieves minimal reflectivity change over 120 cleaning cycles, with XPS and EDS indicating the presence of ruthenium after 125 cleaning cycles. The change in surface roughness over 100 cleaning cycles is within the noise (0.0086nm) on a mask blank, and SEM inspection of 100nm and 200nm features on patterned masks after undergoing 100 cleaning cycles show no indications of ruthenium pitting or significant surface damage. This process was used on test masks to remove particles from both sides that would otherwise inhibit these masks from being used in the scanner.

  19. Clean and highly ordered graphene synthesized in the gas phase.

    Science.gov (United States)

    Dato, Albert; Lee, Zonghoon; Jeon, Ki-Joon; Erni, Rolf; Radmilovic, Velimir; Richardson, Thomas J; Frenklach, Michael

    2009-10-28

    We report that the substrate-free gas-phase graphene synthesis method produces clean and highly ordered graphene sheets that are similar in quality to the graphene obtained through the mechanical exfoliation of highly oriented pyrolytic graphite.

  20. The Current Situation and Development Trend of Clean Coal Gasification Technology in China (Ⅰ)%我国洁净煤气化技术现状与存在的问题及发展趋势(上)

    Institute of Scientific and Technical Information of China (English)

    梁永煌; 游伟; 章卫星

    2013-01-01

    The paper first introduces application of a large variety of advanced clean coal gasification technology and related projects under construction which are imported or independently developed and its current development in China .Besides , the paper details production capacity and projects under construction concerning traditional chemical industry such as production of methanol , synthetic ammonia , urea and modern coal chemical industry such as coal-based olefin , ethylene glycol and coal-based chemical industry such as substitute natural gas , oil and coal polygeneration .By analyzing major issues in the development process of clean coal gasification technology , the writing focuses on development trend of clean coal gasification technology in China .%介绍了我国现有(含在建)引进和自主开发的各种先进洁净煤气化技术的应用及发展情况,详细列举煤制甲醇、合成氨、尿素等传统煤化工领域和煤制烯烃、乙二醇等现代煤化工领域以及在煤制天然气、油和煤气化多联产等煤气化相关产业中的产能及在建情况。分析了当前我国洁净煤气化技术发展过程中存在的主要问题,并展望了我国洁净煤气化技术的主要发展趋势。

  1. SYQ-3型节能清蜡机研制与应用%Development and application of model SYQ-3 energy-saving paraffin cleaning equipment

    Institute of Scientific and Technical Information of China (English)

    李良青; 沈建华; 宋改春

    2001-01-01

    Model SYQ-3 paraffin cleaning equipment is a new kind of energy-saving wax removing and well flushing equipment which is designed for waxed oil well.Structure and working principle are introduced.Through field testing and application it is proved that this equipment has suitable structure and good performance.It is a ideal equipment for paraffin cleaning,and has high value for extending application.%SYQ-3型节能清蜡机是针对油井结蜡而专门研制的新型节能清蜡洗井设备,简要介绍该设备设计结构,工作原理,通过现场试验及应用,证明该设备结构合理,性能良好,是油井清蜡的一种较理想的设备,具有推广价值。

  2. Towards sustainable and safe apparel cleaning methods: A review.

    Science.gov (United States)

    Troynikov, Olga; Watson, Christopher; Jadhav, Amit; Nawaz, Nazia; Kettlewell, Roy

    2016-11-01

    Perchloroethylene (PERC) is a compound commonly used as a solvent in dry cleaning, despite its severe health and environmental impacts. In recent times chemicals such as hydrocarbons, GreenEarth(®), acetal and liquid carbon dioxide have emerged as less damaging substitutes for PERC, and an even more sustainable water-based wet cleaning process has been developed. We employed a systematic review approach to provide a comprehensive overview of the existing research evidence in the area of sustainable and safe apparel cleaning methods and care. Our review describes traditional professional dry cleaning methods, as well as those that utilise solvents other than PERC, and their ecological attributes. In addition, the new professional wet cleaning process is discussed. Finally, we address the health hazards of the various solvents used in dry cleaning and state-of-the-art solvent residue trace analysis techniques.

  3. A biomechanical comparison of the vertical jump, power clean, and jump squat.

    Science.gov (United States)

    MacKenzie, Sasho James; Lavers, Robert J; Wallace, Brendan B

    2014-01-01

    The purpose of this study was to compare the kinetics, kinematics, and muscle activation patterns of the countermovement jump, the power clean, and the jump squat with the expectation of gaining a better understanding of the mechanism of transfer from the power clean to the vertical jump. Ground reaction forces, electromyography, and joint angle data were collected from 20 trained participants while they performed the three movements. Relative to the power clean, the kinematics of the jump squat were more similar to those of the countermovement jump. The order in which the ankle, knee, and hip began extending, as well as the subsequent pattern of extension, was different between the power clean and countermovement jump. The electromyography data demonstrated significant differences in the relative timing of peak activations in all muscles, the maximum activation of the rectus femoris and biceps femoris, and in the activation/deactivation patterns of the vastus medialis and rectus femoris. The greatest rate of force development during the upward phase of these exercises was generated during the power clean (17,254 [Formula: see text]), which was significantly greater than both the countermovement jump (3836 [Formula: see text]) and jump squat (3517 [Formula: see text]) conditions (P < .001, [Formula: see text]).

  4. Dynamic self-cleaning in gecko setae via digital hyperextension.

    Science.gov (United States)

    Hu, Shihao; Lopez, Stephanie; Niewiarowski, Peter H; Xia, Zhenhai

    2012-11-01

    Gecko toe pads show strong adhesion on various surfaces yet remain remarkably clean around everyday contaminants. An understanding of how geckos clean their toe pads while being in motion is essential for the elucidation of animal behaviours as well as the design of biomimetic devices with optimal performance. Here, we test the self-cleaning of geckos during locomotion. We provide, to our knowledge, the first evidence that geckos clean their feet through a unique dynamic self-cleaning mechanism via digital hyperextension. When walking naturally with hyperextension, geckos shed dirt from their toes twice as fast as they would if walking without hyperextension, returning their feet to nearly 80 per cent of their original stickiness in only four steps. Our dynamic model predicts that when setae suddenly release from the attached substrate, they generate enough inertial force to dislodge dirt particles from the attached spatulae. The predicted cleaning force on dirt particles significantly increases when the dynamic effect is included. The extraordinary design of gecko toe pads perfectly combines dynamic self-cleaning with repeated attachment/detachment, making gecko feet sticky yet clean. This work thus provides a new mechanism to be considered for biomimetic design of highly reuseable and reliable dry adhesives and devices.

  5. Prenatal craniofacial development: new insights on normal and abnormal mechanisms.

    Science.gov (United States)

    Johnston, M C; Bronsky, P T

    1995-01-01

    Technical advances are radically altering our concepts of normal prenatal craniofacial development. These include concepts of germ layer formation, the establishment of the initial head plan in the neural plate, and the manner in which head segmentation is controlled by regulatory (homeobox) gene activity in neuromeres and their derived neural crest cells. There is also a much better appreciation of ways in which new cell associations are established. For example, the associations are achieved by neural crest cells primarily through cell migration and subsequent cell interactions that regulate induction, growth, programmed cell death, etc. These interactions are mediated primarily by two groups of regulatory molecules: "growth factors" (e.g., FGF and TGF alpha) and the so-called steroid/thyroid/retinoic acid superfamily. Considerable advances have been made with respect to our understanding of the mechanisms involved in primary and secondary palate formation, such as growth, morphogenetic movements, and the fusion/merging phenomenon. Much progress has been made on the mechanisms involved in the final differentiation of skeletal tissues. Molecular genetics and animal models for human malformations are providing many insights into abnormal development. A mouse model for the fetal alcohol syndrome (FAS), a mild form of holoprosencephaly, demonstrates a mid-line anterior neural plate deficiency which leads to olfactory placodes being positioned too close to the mid-line, and other secondary changes. Work on animal models for the retinoic acid syndrome (RAS) shows that there is major involvement of neural crest cells. There is also major crest cell involvement in similar syndromes, apparently including hemifacial microsomia. Later administration of retinoic acid prematurely and excessively kills ganglionic placodal cells and leads to a malformation complex virtually identical to the Treacher Collins syndrome. Most clefts of the lip and/or palate appear to have a

  6. REVIEW OF ALTERNATIVE ENHANCED CHEMICAL CLEANING OPTIONS FOR SRS WASTE TANKS

    Energy Technology Data Exchange (ETDEWEB)

    Hay, M.; Koopman, D.

    2009-08-01

    A literature review was conducted to support the Task Technical and Quality Assurance Plan for Alternative Enhanced Chemical Cleaning (AECC) for sludge heel removal funded as part of the EM-21 Engineering and Technology program. The goal was to identify potential technologies or enhancements to the baseline oxalic acid cleaning process for chemically dissolving or mobilizing Savannah River Site (SRS) sludge heels. The issues with the potentially large volume of oxalate solids generated from the baseline process have driven an effort to find an improved or enhanced chemical cleaning technology for the tank heels. This literature review builds on a previous review conducted in 2003. A team was charged with evaluating the information in these reviews and developing recommendations of alternative technologies to pursue. The new information in this report supports the conclusion of the previous review that oxalic acid remains the chemical cleaning agent of choice for dissolving the metal oxides and hydroxides found in sludge heels in carbon steel tanks. The potential negative impact of large volumes of sodium oxalate on downstream processes indicates that the amount of oxalic acid used for chemical cleaning needs to be minimized as much as possible or the oxalic acid must be destroyed prior to pH adjustment in the receipt tank. The most straightforward way of minimizing the volume of oxalic acid needed for chemical cleaning is through more effective mechanical cleaning. Using a mineral acid to adjust the pH of the sludge prior to adding oxalic acid may also help to minimize the volume of oxalic acid used in chemical cleaning. If minimization of oxalic acid proves insufficient in reducing the volume of oxalate salts, several methods were found that could be used for oxalic acid destruction. For some waste tank heels, another acid or even caustic treatment (or pretreatment) might be more appropriate than the baseline oxalic acid cleaning process. Caustic treatment of high

  7. Clean electricity from photovoltaics

    CERN Document Server

    Green, Martin A

    2015-01-01

    The second edition of Clean Electricity from Photovoltaics , first published in 2001, provides an updated account of the underlying science, technology and market prospects for photovoltaics. All areas have advanced considerably in the decade since the first edition was published, which include: multi-crystalline silicon cell efficiencies having made impressive advances, thin-film CdTe cells having established a decisive market presence, and organic photovoltaics holding out the prospect of economical large-scale power production. Contents: The Past and Present (M D Archer); Limits to Photovol

  8. Flue Gas Cleaning

    DEFF Research Database (Denmark)

    Fehrmann, Rasmus

    2014-01-01

    and sulfuric acid in the atmosphere causing precipitation of acid rain resulting in death of forests and destruction of buildings and monuments in addition to human health problems. The most common state-of-the-art methods applied today industrially for cleaning of flue gases will be addressed, including wet......-time. But the problems may also be attacked by new materials like supported ionic liquid phase (SILP) gas absorbers where the pollutants may be selectively absorbed, desorbed and finally converted to useful mineral acids of commercial grade – really a green waste-to-value approach that we persue instead...

  9. Pengembangan Sistem Informasi Pemesanan Layanan Jasa Cleaning Service Berbasis Web Dan Mobile Di Liochita Cleaning Semarang

    Directory of Open Access Journals (Sweden)

    Aulio Romadho Agung

    2016-01-01

    Full Text Available Liochita cleaning is a company engaged in the field of cleaning services which are located in the city of Semarang. Until now, the existing of information systems on Liochita Cleaning were not sufficiently able to manage the company and thus to make this company as a company that developed and developing its field and can compete with other companies is not possible. Start from recording customer data and order data, which is the became one as income data, so this companies are less aware in detail of the customer data. On the other hand, customers must make a call in advance to order the services that it requires no small cost. Lack of marketing facilities makes this company unable to include all of costumers in the city of Semarang. Data recording is still using paper, so this company were at risk of paper lost which is containing data that has been recorded . Development of an information system in this study using the method of the waterfall. Waterfall model consists of: requirements, design, implementation, testing and maintenance. For the start of the design, developer need to observations or interviews to determine the needs of the system that being developed. Applications developed using the framework CodeIgniter. The results of this final project is an information system that can meet the needs of Liochita Cleaning in the management of these services, customers and orders in accordance with the business processes that Liochita Cleaning have and allow customers to book services .

  10. Financing clean energy market creation. Clean energy ventures, venture capitalists and other investors

    Energy Technology Data Exchange (ETDEWEB)

    Teppo, T. [Helsinki Univ. of Technology, Espoo (Finland). Development and Management in Industry

    2006-07-01

    Many factors have emerged for change towards cleaner and more efficient technologies and services: climate change, increasing oil demands, and rising living standards in many parts of the world are putting an ever-increasing strain on the environment. Recently, these drivers have fueled the formation of a clean energy venture capital market where both independent venture capitalists (VCs) and corporate venture capitalists (CVCs) have invested in clean energy start-ups. Financing of clean energy market creation is the focus of this dissertation. The dissertation contributes to several bodies of literature in the area of entrepreneurship, new industry creation, corporate venturing, and venture capital research. The dissertation uses a grounded theory approach. The study is guided by three data collection approaches with an emphasis on the first two. First, interviews with European and North American VC and CVC firms that have invested in the clean energy sector were carried out. Second, a clean energy venture financing survey that consisted of qualitative, essay-format questions and some quantitative questions was carried out. Third, interviews with clean energy stakeholders were carried out in order to gain a better understanding of the emerging sector. The research results consist of three main findings. First, the research results suggest that clean energy ventures face the following three main entrepreneurial challenges: financing, market education, and growth management. A further study of three clean energy industry categories revealed additional challenges that varied according to the industry development stage. Second, the results demonstrate that, from a venture capitalist perspective, clean energy venture risk characteristics can be divided into two groups: generally recognized risk characteristics and cognitive risk characteristics. The identified generally recognized risk characteristics were market demand and adaptation, incompatibility with the VC model

  11. Development of Mechanical and Failure Properties in Sheep Cerebral Arteries.

    Science.gov (United States)

    Nye, Kevin S; Converse, Matthew I; Dahl, Mar Janna; Albertine, Kurt H; Monson, Kenneth L

    2017-04-01

    Traumatic brain injury (TBI) is a devastating problem for people of all ages, but the nature of the response to such injury is often different in children than in adults. Cerebral vessel damage and dysfunction are common following TBI, but age-dependent, large-deformation vessel response has not been characterized. Our objective was to investigate the mechanical properties of cerebral arteries as a function of development. Sheep middle cerebral arteries from four age groups (fetal, newborn, juvenile, and adult) were subjected to biaxial loading around physiological conditions and then to failure in the axial direction. Results show little difference among age groups under physiological loading conditions, but response varied significantly with age in response to large axial deformation. Vessels from all age groups reached the same ultimate stretch level, but the amount of stress carried at a given level of stretch increased significantly with age through the developmental period (fetal to juvenile). Our results are the first to identify changes in cerebral vessel response to large deformations with age and may lead to new insights regarding differences in response to TBI with age.

  12. Development of a LIGA-based elastodynamic flying mechanism

    Science.gov (United States)

    Cox, Adam G.; Garcia, Ephrahim

    1998-07-01

    With the emergence of MEMS and LIGA technology piezoceramics can be integrated to create tiny solid state devices. The precision motion that piezoelectric materials can provide is complimented by the tolerances that can be achieved through MEMS and LIGA micromachining. The integration of these two technologies is ideal for microactuation. A LIGA based devices has been developed that is capable of amplifying small motions from a piezoelectric element into an output stroke angle large enough to produce flight. Micro flight is a difficult aerodynamic problem. With small wing areas conventional lift requires velocities that are difficult to achieve. However it is possible to induce lift using drag in the same manner as some birds and insects. Flapping is a highly efficient way to produce flight. For sustained low energy flight both insects and birds use a complex elastodynamic system that only requires them to excite it at its natural frequency. The actuation device presented is based on the same flight principle of insects and birds, a resonating elastodynamic system excited at its natural frequency or at a lower harmonic. This allows for long distance flights that require little energy. Piezoceramics posses a high energy level and force output that can excite the device and induce a flapping motion. The dynamics of the system rely on the LIGA flexure mechanism, the piezoelectric element, as well as the aerodynamic interaction of the wing and the air which is a complex nonlinear problem.

  13. Development and Validation of Chemical Kinetic Mechanism Reduction Scheme for Large-Scale Mechanisms

    DEFF Research Database (Denmark)

    Poon, Hiew Mun; Ng, Hoon Kiat; Gan, Suyin

    2014-01-01

    This work is an extension to a previously reported work on chemical kinetic mechanism reduction scheme for large-scale mechanisms. Here, Perfectly Stirred Reactor (PSR) was added as a criterion of data source for mechanism reduction instead of using only auto-ignition condition. As a result, a re...

  14. Technology: New Ways for Clean Water

    Science.gov (United States)

    Roberts, Amanda S.

    2012-01-01

    Water purification promotes healthy living. While the developing world is working to provide its citizens with future access to clean water sources, the demand for that water is a pressing need today. It should be understood that drinking water, sanitation, and hygiene are interwoven and are all necessary for the overall improved standard of…

  15. Cleaning up the future of coal

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ CAS is making efforts to seek green solutions to address the pollution problem of the traditional forms of coal utilization. For instance, as SONG Jianlan reports, a research team from the Taiyuan-based CAS Institute of Coal Chemistry has developed clean, efficient ways to convert coal into liquefied fuels.

  16. News from Online: Cleaning Up--Soap, Detergent, and More.

    Science.gov (United States)

    Judd, Carolyn Sweeney

    2002-01-01

    Provides a guide to web resources on cleaning and hygiene. Answers the questions, What do you want to clean--your hair? your carpet? your rusty lawn furniture? Develops special products for different tasks. Focuses on products to use and the environmental impact of our choices. (MM)

  17. Evaluation of Teaching on Clean Energy with Wind Power Generation

    OpenAIRE

    塩沢, 臣城; 石田, 聡一; 干川, 圭吾

    2000-01-01

    Evaluation of teaching material on clean energy with wind power generation is reported in this paper. A wind power generation system was developed as a teaching material in electric and electronics field in technology education of junior high school. It is shown that the teaching material was effective for students to understand the wind power generation and the clean energy.

  18. Development and validation of an achievement test in introductory quantum mechanics: The Quantum Mechanics Visualization Instrument (QMVI)

    Science.gov (United States)

    Cataloglu, Erdat

    The purpose of this study was to construct a valid and reliable multiple-choice achievement test to assess students' understanding of core concepts of introductory quantum mechanics. Development of the Quantum Mechanics Visualization Instrument (QMVI) occurred across four successive semesters in 1999--2001. During this time 213 undergraduate and graduate students attending the Pennsylvania State University (PSU) at University Park and Arizona State University (ASU) participated in this development and validation study. Participating students were enrolled in four distinct groups of courses: Modern Physics, Undergraduate Quantum Mechanics, Graduate Quantum Mechanics, and Chemistry Quantum Mechanics. Expert panels of professors of physics experienced in teaching quantum mechanics courses and graduate students in physics and science education established the core content and assisted in the validating of successive versions of the 24-question QMVI. Instrument development was guided by procedures outlined in the Standards for Educational and Psychological Testing (AERA-APA-NCME, 1999). Data gathered in this study provided information used in the development of successive versions of the QMVI. Data gathered in the final phase of administration of the QMVI also provided evidence that the intended score interpretation of the QMVI achievement test is valid and reliable. A moderate positive correlation coefficient of 0.49 was observed between the students' QMVI scores and their confidence levels. Analyses of variance indicated that students' scores in Graduate Quantum Mechanics and Undergraduate Quantum Mechanics courses were significantly higher than the mean scores of students in Modern Physics and Chemistry Quantum Mechanics courses (p Cronbach-alpha reliability coefficient of the QMVI was found to be 0.82. Limited findings were drawn on students' understanding of introductory quantum mechanics concepts. Data suggested that the construct of quantum mechanics

  19. Self-cleaning surfaces - virtual realities

    Science.gov (United States)

    Blossey, Ralf

    2003-05-01

    In the 19th century, Oscar Wilde stated ``We live, I regret to say, in an age of surfaces''. Today, we do so even more, and we do not regret it: key advances in the understanding and fabrication of surfaces with controlled wetting properties are about to make the dream of a contamination-free (or 'no-clean') surface come true. Two routes to self-cleaning are emerging, which work by the removal of dirt by either film or droplet flow. Although a detailed understanding of the mechanisms underlying the behaviour of liquids on such surfaces is still a basic research topic, the first commercial products in the household-commodity sector and for applications in biotechnology are coming within reach of the marketplace. This progress report describes the current status of understanding of the underlying mechanisms, the concepts for making such surfaces, and some of their first applications.

  20. Self-cleaning surfaces--virtual realities.

    Science.gov (United States)

    Blossey, Ralf

    2003-05-01

    In the 19th century, Oscar Wilde stated "We live, I regret to say, in an age of surfaces". Today, we do so even more, and we do not regret it: key advances in the understanding and fabrication of surfaces with controlled wetting properties are about to make the dream of a contamination-free (or 'no-clean') surface come true. Two routes to self-cleaning are emerging, which work by the removal of dirt by either film or droplet flow. Although a detailed understanding of the mechanisms underlying the behaviour of liquids on such surfaces is still a basic research topic, the first commercial products in the household-commodity sector and for applications in biotechnology are coming within reach of the marketplace. This progress report describes the current status of understanding of the underlying mechanisms, the concepts for making such surfaces, and some of their first applications.