WorldWideScience

Sample records for class iii dentofacial

  1. Surgical-orthodontic correction of a Class III dentofacial deformity.

    Science.gov (United States)

    Devanna, Raghu; Kakkirala, Neelima

    2010-04-01

    This case report describes the surgical-orthodontic treatment of a 26-year-old post-pubertal male patient with a Class III dentofacial deformity. In the pre-surgical orthodontic phase of treatment, a reverse overjet of 5.5 mm was created and arch compatibility was obtained. A mandibualr set back with BSSO was performed during surgery to restore ideal overjet, overbite, occlusion and optimal esthetics. After 1 year of treatment, the results remained stable.

  2. Surgical-orthodontic correction of a Class III dentofacial deformity

    Directory of Open Access Journals (Sweden)

    Raghu Devanna

    2010-01-01

    Full Text Available This case report describes the surgical-orthodontic treatment of a 26-year-old post-pubertal male patient with a Class III dentofacial deformity. In the pre-surgical orthodontic phase of treatment, a reverse overjet of 5.5 mm was created and arch compatibility was obtained. A mandibualr set back with BSSO was performed during surgery to restore ideal overjet, overbite, occlusion and optimal esthetics. After 1 year of treatment, the results remained stable.

  3. Inclinação de cabeça durante a mastigação habitual nas deformidades dentofaciais classe II e III Head inclination during habitual chewing in the presence of class II and III dentofacial deformities

    Directory of Open Access Journals (Sweden)

    Marcela Ralin de Carvalho Deda

    2011-04-01

    Full Text Available OBJETIVO: este estudo investiga a diferença entre grupos com deformidade dentofacial (padrão classe II e classe III, em relação à preferência mastigatória referida e inclinação de cabeça durante a mastigação, assim como predomínio intra-grupo de cada um desses aspectos, comparativamente a um grupo controle. MÉTODOS: participaram deste estudo, voluntariamente, 25 pacientes (entre 18 e 35 anos. Doze pacientes com diagnóstico de deformidade dentofacial classe II e 13 pacientes com o diagnóstico de classe III esquelética e 10 voluntários, com equivalência em sexo e idade ao grupo de deformidade, formando o grupo controle. Os voluntários da pesquisa foram questionados sobre a existência de um lado de preferência mastigatória. Em seguida foram filmados durante a mastigação habitual de um biscoito maizena e através das imagens captadas, a postura de cabeça pôde ser analisada. RESULTADOS: não houve diferença entre os grupos em relação à preferência mastigatória referida, entretanto os grupos com deformidades dentofaciais apresentaram predomínio significativo de preferência mastigatória referida. Os grupos com deformidade dentofacial apresentaram maior predomínio de inclinação de cabeça durante a mastigação quando comparados ao grupo controle. CONCLUSÃO: indivíduos com deformidade dentofacial podem apresentar uma preferência mastigatória e alteração de postura de cabeça durante a mastigação.PURPOSE: the study was conducted in order to investigate the difference among groups with class II and class III dentofacial deformities regarding reported chewing side preference and head inclination during chewing and to determine the intra-group predominance for these features when compared to a control group. METHODS: twenty-five volunteers aged from 15 to 34 years took part in the study, 12 of them with a diagnosis of class II dentofacial deformity, 13 with class III dentofacial deformity, and 10 control

  4. An Assessment of the Quality of Life of Patients With Class III Deformities Treated With Orthognathic Surgery.

    Science.gov (United States)

    Kilinc, Adnan; Ertas, Umit

    2015-07-01

    To evaluate quality of life (QoL) from a broad perspective by a comparison of Turkish patients undergoing orthognathic surgery to correct Angle Class III skeletal deformity with a control group composed of participants without dentofacial deformity using general health, generic oral health, and condition-specific QoL approaches. Thirty patients who underwent orthognathic surgery to correct Class III relations (monomaxillary and bimaxillary groups) and 30 participants with Class I skeletal structure and good dentofacial harmony (control group) were evaluated. Condition-specific QoL through a 22-item Orthognathic Quality of Life Questionnaire (OQLQ), generic oral health-related QoL through a 14-item Short-Form Oral Health Impact Profile (OHIP-14), and generic health-related QoL through a 36-item Short-Form Health Survey (SF-36) were assessed. When the groups were compared, OQLQ scores showed a significant difference in the oral function domain only in the bimaxillary group (P orthognathic surgical patients appeared to be similar to that of participants without dentofacial deformities. Oral health-related QoL of orthognathic surgical patients seemed moderately similar to that of participants without dentofacial deformities. The combined use of these methods is helpful for evaluating QoL from a larger perspective. Copyright © 2015 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

  5. Class III treatment using facial mask: Stability after 10 years

    Directory of Open Access Journals (Sweden)

    Adilson Luiz Ramos

    2014-10-01

    Full Text Available Early Class III malocclusion treatment may not have long-term stability due to mandibular growth. Although some features of this malocclusion point to a better prognosis, it is practically impossible for the orthodontist to foresee cases that require new intervention. Many patients need retreatment, whether compensatory or orthodontic-surgical. The present study reports the case of a Class III patient treated at the end of the mixed dentition with the use of a face mask followed by conventional fixed appliances. The case remains stable 10 years after treatment completion. It was presented to the Brazilian Board of Orthodontics and Dentofacial Orthopedics (BBO as a requirement for the title of certified by the BBO.

  6. Dentofacial growth changes in subjects with untreated Class II malocclusion from late puberty through young adulthood.

    Science.gov (United States)

    Baccetti, Tiziano; Stahl, Franka; McNamara, James A

    2009-02-01

    The purpose of this longitudinal study was to compare dentofacial growth changes in untreated subjects with Class II Division 1 malocclusion with those in subjects with normal (Class I) occlusion from late puberty through young adulthood. The Class II Division 1 sample consisted of 23 subjects (10 male, 13 female). The Class I sample included 30 subjects (13 male, 17 female). The lateral cephalograms of the subjects in both groups were analyzed at 2 consecutive stages of development: T1, postpubertal observation (cervical vertebral maturation stage 6), and T2, young adulthood stage. The average time between T1 and T2 was 3.5 years. The statistical comparisons of the growth changes in the 2 groups were performed with Mann-Whitney U tests. From late puberty through young adulthood, dentofacial growth in subjects with untreated Class II malocclusion does not show significant differences when compared with that observed in untreated subjects with normal occlusion. These findings show that Class II dentoskeletal disharmony does not exhibit significant growth change from late puberty through young adulthood.

  7. Management of Skeletal Class III Malocclusion with a Combined Approach of Facemask Therapy & Fixed Orthodontic Treatment - A Case Report

    Directory of Open Access Journals (Sweden)

    Shraddha Subhash Shetti

    2013-01-01

    Full Text Available A case report of an adolescent girl with a skeletal Class III malocclusion is presented. The associated clinical features of skeletal Class III are presented and management of such condition is discussed. The need for early identification and intervention of the skeletal Class III malocclusion is universally accepted by dentofacial orthopaedicians. Early intervention is associated with a better orthopedic response. Thus, treatment in the mixed or early permanent dentition can produce favorable results. Overcorrection of skeletal class III is recommended because treated patients grow similar to untreated Class III patients after treatment. Functional orthopaedic treatment rendered at an appropriate age ensures desired results in most cases. The intent of this article is to discuss the non-surgical treatment of a skeletal class III malocclusion along with a rationale of orthodontic management of such patients.

  8. Dentofacial effects of bone-anchored maxillary protraction: a controlled study of consecutively treated Class III patients.

    Science.gov (United States)

    De Clerck, Hugo; Cevidanes, Lucia; Baccetti, Tiziano

    2010-11-01

    In this cephalometric investigation, we analyzed the treatment effects of bone-anchored maxillary protraction (BAMP) with miniplates in the maxilla and mandible connected by Class III elastics in patients with Class III malocclusion. The treated sample consisted of 21 Class III patients consecutively treated with the BAMP protocol before the pubertal growth spurt (mean age, 11.10 ± 1.8 years) and reevaluated after BAMP therapy, about 1 year later. The treated group was compared with a matched control group of 18 untreated Class III subjects. Significant differences between the treated and control groups were assessed with independent-sample t tests (P <0.05). Sagittal measurements of the maxilla showed highly significant improvements during active treatment (about 4 mm more than the untreated controls), with significant protraction effects at orbitale and pterygomaxillare. Significant improvements of overjet and molar relationship were recorded, as well as in the mandibular skeletal measures at Point B and pogonion. Vertical skeletal changes and modifications in incisor inclination were negligible, except for a significant proclination of the mandibular incisors in the treated group. Significant soft-tissue changes reflected the underlying skeletal modifications. Compared with growth of the untreated Class III subjects, the BAMP protocol induced an average increment on skeletal and soft-tissue advancement of maxillary structures of about 4 mm, and favorable mandibular changes exceeded 2 mm. Copyright © 2010 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

  9. Condition-specific Quality of Life Assessment at Each Stage of Class III Surgical Orthodontic Treatment -A Prospective Study.

    Science.gov (United States)

    Tachiki, Chie; Nishii, Yasushi; Takaki, Takashi; Sueishi, Kenji

    2018-01-01

    Surgical orthodontic treatment has been reported to improve oral health-related quality of life (OHRQL). Such treatment comprises three stages: pre-surgical orthodontic treatment; orthognathic surgery; and post-surgical orthodontic treatment. Most studies have focused on change in OHRQL between before and after surgery. However, it is also necessary to evaluate OHRQL at the pre-surgical orthodontic treatment stage, as it may be negatively affected by dental decompensation compared with at pre-treatment. The purpose of this prospective study was to investigate the influence of surgical orthodontic treatment on QOL by assessing change in condition-specific QOL at each stage of treatment in skeletal class III cases. Twenty skeletal class III patients requiring surgical orthodontic treatment were enrolled in the study. Each patient completed the Orthognathic Quality of Life Questionnaire (OQLQ), which was developed for patients with dentofacial deformity. Its items are grouped into 4 domains: "social aspects of dentofacial deformity"; "facial esthetics"; "oral function"; and "awareness of dentofacial esthetics". The questionnaire was completed at the pre-treatment, pre-surgical orthodontic treatment, and post-surgical orthodontic treatment stages. The results revealed a significant worsening in scores between at pre-treatment and pre-surgical orthodontic treatment in the domains of facial esthetics and oral function (ppre-surgical orthodontic and post-surgical orthodontic treatment in all domains except awareness of dentofacial esthetics (ppre-surgical orthodontic treatment stage. Significant correlations were also observed between improvement in upper and lower lip difference, soft tissue pogonion protrusion, and ANB angle and improvement in OQLQ scores at the post-surgical orthodontic treatment stage. These results indicate that morphologic change influences OHRQL in patients undergoing surgical orthodontic treatment not only after surgery, but also during pre

  10. Orthodontic retreatment using anchorage with miniplate to camouflage a Class III skeletal pattern.

    Science.gov (United States)

    Farret, Marcel Marchiori

    2016-06-01

    This manuscript describes the treatment of a 27-year-old patient who was previously treated with two maxillary first premolar extractions. The patient had skeletal Class III malocclusion, Class III canine relationship, anterior crossbite, and a concave profile. As the patient refused orthognathic surgery, a miniplate was used on the right side of the lower arch as an anchorage unit after the extraction of mandibular first premolars, aiding the retraction of anterior teeth. At the end of treatment, anterior crossbite was corrected, in which first molars and canines were in a Class I relationship, and an excellent intercuspation was reached. Furthermore, patient's profile remarkably improved as a result of mandibular incisor retraction. A 30-month follow-up showed good stability of the results obtained. This case was presented to the Brazilian Board of Orthodontics and Dentofacial Orthopedics (BBO) as one of the requirements to become diplomate by the BBO.

  11. Orthodontic retreatment using anchorage with miniplate to camouflage a Class III skeletal pattern

    Directory of Open Access Journals (Sweden)

    Marcel Marchiori Farret

    Full Text Available ABSTRACT This manuscript describes the treatment of a 27-year-old patient who was previously treated with two maxillary first premolar extractions. The patient had skeletal Class III malocclusion, Class III canine relationship, anterior crossbite, and a concave profile. As the patient refused orthognathic surgery, a miniplate was used on the right side of the lower arch as an anchorage unit after the extraction of mandibular first premolars, aiding the retraction of anterior teeth. At the end of treatment, anterior crossbite was corrected, in which first molars and canines were in a Class I relationship, and an excellent intercuspation was reached. Furthermore, patient's profile remarkably improved as a result of mandibular incisor retraction. A 30-month follow-up showed good stability of the results obtained. This case was presented to the Brazilian Board of Orthodontics and Dentofacial Orthopedics (BBO as one of the requirements to become diplomate by the BBO.

  12. Components of soft tissue deformations in subjects with untreated angle's Class III malocclusions: thin-plate spline analysis.

    Science.gov (United States)

    Singh, G D; McNamara, J A; Lozanoff, S

    1998-01-01

    While the dynamics of maxillo-mandibular allometry associated with treatment modalities available for the management of Class III malocclusions currently are under investigation, developmental aberration of the soft tissues in untreated Class III malocclusions requires specification. In this study, lateral cephalographs of 124 prepubertal European-American children (71 with untreated Class III malocclusion; 53 with Class I occlusion) were traced, and 12 soft-tissue landmarks digitized. Resultant geometries were scaled to an equivalent size and mean Class III and Class I configurations compared. Procrustes analysis established statistical difference (P thin-plate spline (TPS) analysis indicated that both affine and non-affine transformations contribute towards the deformation (total spline) of the averaged Class III soft tissue configuration. For non-affine transformations, partial warp 8 had the highest magnitude, indicating large-scale deformations visualized as a combination of columellar retrusion and lower labial protrusion. In addition, partial warp 5 also had a high magnitude, demonstrating upper labial vertical compression with antero-inferior elongation of the lower labio-mental soft tissue complex. Thus, children with Class III malocclusions demonstrate antero-posterior and vertical deformations of the maxillary soft tissue complex in combination with antero-inferior mandibular soft tissue elongation. This pattern of deformations may represent gene-environment interactions, resulting in Class III malocclusions with characteristic phenotypes, that are amenable to orthodontic and dentofacial orthopedic manipulations.

  13. Alteration of Occlusal Plane in Orthognathic Surgery: Clinical Features to Help Treatment Planning on Class III Patients

    Directory of Open Access Journals (Sweden)

    Daniel Amaral Alves Marlière

    2018-01-01

    Full Text Available Dentofacial deformities (DFD presenting mainly as Class III malocclusions that require orthognathic surgery as a part of definitive treatment. Class III patients can have obvious signs such as increasing the chin projection and chin throat length, nasolabial folds, reverse overjet, and lack of upper lip support. However, Class III patients can present different facial patterns depending on the angulation of occlusal plane (OP, and only bite correction does not always lead to the improvement of the facial esthetic. We described two Class III patients with different clinical features and inclination of OP and had undergone different treatment planning based on 6 clinical features: (I facial type; (II upper incisor display at rest; (III dental and gingival display on smile; (IV soft tissue support; (V chin projection; and (VI lower lip projection. These patients were submitted to orthognathic surgery with different treatment plannings: a clockwise rotation and counterclockwise rotation of OP according to their facial features. The clinical features and OP inclination helped to define treatment planning by clockwise and counterclockwise rotations of the maxillomandibular complex, and two patients undergone to bimaxillary orthognathic surgery showed harmonic outcomes and stables after 2 years of follow-up.

  14. Dentofacial transverse development in Koreans according to skeletal maturation: A cross-sectional study.

    Science.gov (United States)

    Hwang, Soonshin; Noh, Yoonjeong; Choi, Yoon Jeong; Chung, Chooryung; Lee, Hye Sun; Kim, Kyung-Ho

    2018-01-01

    The aim of this study was to establish the normative data of dentofacial transverse dimensions according to the skeletal maturation stage in Korean adolescents with good occlusion, assess gender differences and determine correlations between transverse variables. A total of 577 Korean subjects between ages 7 to 19 years and exhibiting skeletal Class I occlusion were categorized by skeletal maturation index (SMI) of Fishman using hand-wrist radiographs. Dentofacial transverse dimensions were assessed using posteroanterior cephalograms. Independent two-sample t -tests were used to analyze differences between genders. Pearson correlation coefficient was used to determine the correlation between transverse measurements. Dentofacial transverse norms relevant to skeletal maturation stages were established. The average maxillomandibular width difference and ratio at growth completion was 22.16 mm and 77.01% for males; 23.70 mm and 74.06% for females, respectively. Males had greater facial, maxillary and mandibular widths compared to females at every SMI stage. The maxillary and mandibular intermolar widths showed the strongest correlation for both sexes (r = 0.826 for males, r = 0.725 for females). Dentofacial transverse norms of Korean adolescents were established according to developmental stage. All dentofacial widths were greater in males at growth completion. Maxillary and mandibular intermolar widths were strongly correlated. This study may serve as a guideline for the assessment of dentofacial transverse growth according to skeletal maturation stage in Korean adolescents with good occlusion.

  15. Dentofacial injuries in contact sports in Yaounde, Cameroon

    OpenAIRE

    M A Agbor; C C Azodo; N. E. F. Ngagoue

    2012-01-01

    Background: Dentofacial injuries constitute serious problems among competitive and recreational athletes, worldwide. Objective: To determine the prevalence of dentofacial injuries and related factors among individuals participating in contact sports in Yaoundé, Cameroon. Materials and Methods: This cross-sectional study among individuals participating in karate, judo, basketball, handball, football and wrestling in Yaoundé, Cameroon was conducted between January and April, 2012. Results: Of t...

  16. 25 CFR 502.4 - Class III gaming.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Class III gaming. 502.4 Section 502.4 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR GENERAL PROVISIONS DEFINITIONS OF THIS CHAPTER § 502.4 Class III gaming. Class III gaming means all forms of gaming that are not class I gaming or class...

  17. Timely management of developing class III malocclusion

    Directory of Open Access Journals (Sweden)

    M R Yelampalli

    2012-01-01

    Full Text Available Timing of orthodontic treatment, especially for children with developing class III malocclusions, has always been somewhat controversial, and definitive treatment tends to be delayed for severe class III cases. Developing class III patients with moderate to severe anterior crossbite and deep bite may need early intervention in some selected cases. Class III malocclusion may develop in children as a result of an inherent growth abnormality, i.e. true class III malocclusion, or as a result of premature occlusal contacts causing forward functional shift of the mandible, which is known as pseudo class III malocclusion. These cases, if not treated at the initial stage of development, interfere with normal growth of the jaw bases and may result in severe facial deformities. The treatment should be carried out as early as possible for permitting normal growth of the skeletal bases. This paper deals with the selection of an appropriate appliance from the various current options available for early intervention in developing class III malocclusion through two case reports.

  18. Gender differences in Class III malocclusion.

    Science.gov (United States)

    Baccetti, Tiziano; Reyes, Brian C; McNamara, James A

    2005-07-01

    This study evaluated gender differences in the cephalometric records of a large-scale cross-sectional sample of Caucasian subjects with Class III malocclusion at different developmental ages. The purpose also was to provide average age-related and sex-related data for craniofacial measures in untreated Class III subjects that are used as reference in the diagnostic appraisal of the patient with Class III disharmony. The sample examined consisted of 1094 pretreatment lateral cephalometric records (557 female subjects and 537 male subjects) of Caucasian Class III individuals. The age range for female subjects was between three years six months and 57 years seven months. The male subject group ranged from three years three months to 48 years five months. Twelve age groups were identified. Skeletal maturity at different age periods also was determined using the stage of cervical vertebral maturation. Gender differences for all cephalometric variables were analyzed using parametric statistics. The findings of the study indicated that Class III malocclusion is associated with a significant degree of sexual dimorphism in craniofacial parameters, especially from the age of 13 onward. Male subjects with Class III malocclusion present with significantly larger linear dimensions of the maxilla, mandible, and anterior facial heights when compared with female subjects during the circumpubertal and postpubertal periods.

  19. Duration of the pubertal peak in skeletal Class I and Class III subjects.

    Science.gov (United States)

    Kuc-Michalska, Małgorzata; Baccetti, Tiziano

    2010-01-01

    To estimate and compare the duration of the pubertal growth peak in Class I and Class III subjects. The data examined consisted of pretreatment lateral cephalometric records of 218 skeletal Class I or Class III subjects (93 female and 125 male subjects) of white ancestry. The duration of the pubertal peak was calculated from the average chronological age intervals between stages CS3 and CS4 of the cervical vertebral maturation in Class I vs Class III groups (t-test). In skeletal Class I subjects, the pubertal peak had a mean duration of 11 months, whereas in Class III subjects it lasted 16 months. The average difference (5 months) was statistically significant (P < .001). The growth interval corresponding to the pubertal growth spurt (CS3-CS4) was longer in Class III subjects than in subjects with normal skeletal relationships; the larger increases in mandibular length during the pubertal peak reported in the literature for Class III subjects may be related to the longer duration of the pubertal peak.

  20. Frequency of dentofacial asymmetries: a cross-sectional study on orthodontic patients.

    Science.gov (United States)

    Bhateja, Nita Kumari; Fida, Mubassar; Shaikh, Attiya

    2014-01-01

    Correction of orthodontic asymmetries is crucial to achieve functional occlusion, aesthetics and stability of post orthodontic treatment results. To date valid frequency data of dentofacial asymmetries in Pakistani orthodontic patients do not exist to document orthodontic treatment need. The objectives of this study were to determine frequency of dento-facial asymmetries, severity of dental asymmetries and to determine difference in frequency of dentofacial asymmetries in mixed and permanent dentition. The sample of this cross-sectional study comprised of 280 patients (177 females and 103 males) with no history of previous orthodontic treatment having no craniofacial anomalies. Dento-facial asymmetries were assessed from pre-treatment records of patients. Descriptive statistics were used to determine frequency of dentofacial asymmetries and severity of dental asymmetries. Chi-square test was used to determine difference in frequency of dentofacial asymmetries in mixed and permanent dentition. Seventy eight percent (219) of patients had noncoincident midlines, 67.5% (189) had mandibular midline asymmetry, 43.2% (122) had molar asymmetry, 15.7% (44) had mandibular arch asymmetry, 14.3% (40) had maxillary midline asymmetry, 13.6% (38) had maxillary arch asymmetry, 6.1% (17) had nose deviation, and 12.1% (34) had facial asymmetry and chin deviation. In most patients dental midlines were deviated from one another and from facial midline by ¼ lower incisor widths, while molar asymmetry was found in most patients by ¼ cusp width. Mandibular arch asymmetry was more frequent in permanent than mixed dentition (p = 0.054). Non-coincident dental midline is most commonly seen. Nose deviation is least commonly observed. Mandibular arch asymmetry is more frequent in permanent than mixed dentition.

  1. Angle Class I malocclusion with anterior negative overjet

    Directory of Open Access Journals (Sweden)

    Paulo Ávila de Souza

    2016-04-01

    Full Text Available ABSTRACT This clinical case report describes the orthodontic treatment of an 8-year and 9-month old female patient with Angle Class I malocclusion, anterior crossbite and canine Class III relationship. Orthodontic treatment was carried out in two stages. The first one was orthopedic, while the second one included the use of a fixed appliance and the need for space gain for reshaping of maxillary lateral incisors. The two-stage treatment combined with multidisciplinary Restorative Cosmetic Dentistry allowed excellent esthetic and functional outcomes to be achieved. This case was presented to the Brazilian Board of Orthodontics and Dentofacial Orthopedics (BBO as a requirement for the title of certified by the BBO.

  2. Dentofacial morphology in adolescent or early adult patients with cleft lip and palate after a treatment regimen that included vomer flap surgery and pushback palatal repair.

    Science.gov (United States)

    Friede, H; Lilja, J

    1994-06-01

    Dentofacial morphology was evaluated in 94 adolescent or early adult patients born with unilateral or bilateral cleft lip and palate. As well as lip closure, the primary treatment included vomer flap surgery and pushback palatal repair. Roentgencephalometric measurements as well as classification of the patients into different classes of dentofacial deformity indicated development of bimaxillary retrognathia with severe midfacial deficiency in about a quarter of the cases. Our results were similar to those reported by other teams who used similar surgical regimen.

  3. Finishing occlusion in Class II or Class III molar relation: therapeutic Class II and III.

    Science.gov (United States)

    Nangia, A; Darendeliler, M A

    2001-11-01

    The most frequent extraction regime consists of the removal of upper and lower premolars. Depending on anchorage requirements, camouflage treatment options, surgical intervention, or the absence of teeth in only one arch, it may become necessary to finalize the occlusion with a one-dental-unit discrepancy between the upper and lower dental arches. Guidelines are presented for finishing occlusions in Class II or Class III molar relation.

  4. 25 CFR 522.12 - Revocation of class III gaming.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Revocation of class III gaming. 522.12 Section 522.12 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR APPROVAL OF CLASS II AND CLASS III ORDINANCES AND RESOLUTIONS SUBMISSION OF GAMING ORDINANCE OR RESOLUTION § 522.12 Revocation of class III...

  5. DIAGNOSTIC GUIDANCE AND EARLY INTERVENTION IN CLASS III MALOCCLUSION

    Directory of Open Access Journals (Sweden)

    Rinandri Charea Runizar

    2015-06-01

    Full Text Available Timing of orthodontic treatment for Class III malocclusion has always been somewhat controversial. Many orthodontic pioneers like Angle, Tweed, and Graber have advocated early interception of class II malocclusion because this kind of skeletal discrepancy once established, would usually progress rapidly. What kind of early treatment would be appropriate for this malocclusion? Would this approach be effective and promises a stable result? Early orthodontic treatment is defined as a treatment that is initiated during the primary or mixed dentition stage to enhance skeletal and dental development. It is usually done in two phases. The first phase is intended to correct skeletal discrepancy by taking advantage of growth and development period. The second phase followed to improve occlusal relationship. Early treatment of Class III malocclusion is a possible alternative to improve skeletal discrepancy or at the very east may serve to prevent a worsening malocclusion. Principles of Class III early treatment depend on whether it is dental Class III, functional Class III, or skeletal Class III. Practitioners should consider positive and negative factors of a patient before initiating treatment. Likewise, they should understand factors that affect prognosis and stability of the results.

  6. Mandibular condyle dimensions in Peruvian patients with Class II and Class III skeletal patterns.

    Directory of Open Access Journals (Sweden)

    Hugo Zegarra-Baquerizo

    2017-10-01

    Full Text Available Objective: To compare condylar dimensions of young adults with Class II and Class III skeletal patterns using cone-beam computed tomography (CBCT. Materials and methods: 124 CBCTs from 18-30 year-old patients, divided into 2 groups according to skeletal patterns (Class II and Class III were evaluated. Skeletal patterns were classified by measuring the ANB angle of each patient. The anteroposterior diameter (A and P of the right and left mandibular condyle was assessed from a sagittal view by a line drawn from point A (anterior to P (posterior. The coronal plane allowed the evaluation of the medio-lateral diameter by drawing a line from point M (medium to L (lateral; all distances were measured in mm. Results: In Class II the A-P diameter was 9.06±1.33 and 8.86±1.56 for the right and left condyles respectively, in Class III these values were 8.71±1.2 and 8.84±1.42. In Class II the M-L diameter was 17.94±2.68 and 17.67±2.44 for the right and left condyles respectively, in Class III these values were 19.16±2.75 and 19.16±2.54. Conclusion: Class III M-L dimensions showed higher values than Class II, whereas these differences were minimal in A-P.

  7. Gait and Function in Class III Obesity

    Directory of Open Access Journals (Sweden)

    Catherine Ling

    2012-01-01

    Full Text Available Walking, more specifically gait, is an essential component of daily living. Walking is a very different activity for individuals with a Body Mass Index (BMI of 40 or more (Class III obesity compared with those who are overweight or obese with a BMI between 26–35. Yet all obesity weight classes receive the same physical activity guidelines and recommendations. This observational study examined the components of function and disability in a group with Class III obesity and a group that is overweight or has Class I obesity. Significant differences were found between the groups in the areas of gait, body size, health condition, and activity capacity and participation. The Timed Up and Go test, gait velocity, hip circumference, and stance width appear to be most predictive of activity capacity as observed during gait assessment. The findings indicate that Class III-related gait is pathologic and not a normal adaptation.

  8. Dentofacial injuries in commercial motorcycle accidents in Cameroon

    African Journals Online (AJOL)

    Methods: This was a hospital based study conducted in 6 out of 10 regional ... large portion of road traffic accidents in developing ... networks, unplanned urban transportation with the ... This study was of 387 cases of dentofacial injuries at-.

  9. Interdisciplinary orthognathic treatment of high angle class III ...

    African Journals Online (AJOL)

    For Class III adult patients, combined treatment strategy must be followed which includes either further dentoalveolar compensation or orthognathic surgery following decompensation of the teeth. This case report presents the interdisciplinary approach of a skeletal Class III malocclusion with increased vertical facial ...

  10. Expansion/Facemask Treatment of an Adult Class III Malocclusion.

    Science.gov (United States)

    Jackson, Gregory W; Kravitz, Neal D

    2014-01-01

    The orthodontic treatment of class III malocclusion with a maxillary deficiency is often treated with maxillary protraction with or without expansion. Skeletal and dental changes have been documented which have combined for the protraction of the maxilla and the correction of the class III malocclusion. Concerning the ideal time to treat a developing class III malocclusion, studies have reported that, although early treatment may be the most effective, face mask therapy can provide a viable option for older children as well. But what about young adults? Can the skeletal and dental changes seen in expansion/facemask therapy in children and adolescents be demonstrated in this age group as well, possibly eliminating the need for orthodontic dental camouflage treatment or orthognathic surgery? A case report is presented of an adult class III malocclusion with a Class III skeletal pattern and maxillary retrusion. Treatment was with nonextraction, comprehensive edgewise mechanics with slow maxillary expansion with a bonded expander and protraction facemask.

  11. Expansion/Facemask Treatment of an Adult Class III Malocclusion

    Directory of Open Access Journals (Sweden)

    Gregory W. Jackson

    2014-01-01

    Full Text Available The orthodontic treatment of class III malocclusion with a maxillary deficiency is often treated with maxillary protraction with or without expansion. Skeletal and dental changes have been documented which have combined for the protraction of the maxilla and the correction of the class III malocclusion. Concerning the ideal time to treat a developing class III malocclusion, studies have reported that, although early treatment may be the most effective, face mask therapy can provide a viable option for older children as well. But what about young adults? Can the skeletal and dental changes seen in expansion/facemask therapy in children and adolescents be demonstrated in this age group as well, possibly eliminating the need for orthodontic dental camouflage treatment or orthognathic surgery? A case report is presented of an adult class III malocclusion with a Class III skeletal pattern and maxillary retrusion. Treatment was with nonextraction, comprehensive edgewise mechanics with slow maxillary expansion with a bonded expander and protraction facemask.

  12. Archform comparisons between skeletal class II and III malocclusions.

    Directory of Open Access Journals (Sweden)

    Wei Zou

    Full Text Available The purpose of this cross-sectional research was to explore the relationship of the mandibular dental and basal bone archforms between severe Skeletal Class II (SC2 and Skeletal Class III (SC3 malocclusions. We also compared intercanine and intermolar widths in these two malocclusion types. Thirty-three virtual pretreatment mandibular models (Skeletal Class III group and Thirty-five Skeletal Class II group pretreatment models were created with a laser scanning system. FA (the midpoint of the facial axis of the clinical crownand WALA points (the most prominent point on the soft-tissue ridgewere employed to produce dental and basal bone archforms, respectively. Gained scatter diagrams of the samples were processed by nonlinear regression analysis via SPSS 17.0. The mandibular dental and basal bone intercanine and intermolar widths were significantly greater in the Skeletal Class III group compared to the Skeletal Class II group. In both groups, a moderate correlation existed between dental and basal bone arch widths in the canine region, and a high correlation existed between dental and basal bone arch widths in the molar region. The coefficient of correlation of the Skeletal Class III group was greater than the Skeletal Class II group. Fourth degree, even order power functions were used as best-fit functions to fit the scatter plots. The radius of curvature was larger in Skeletal Class III malocclusions compared to Skeletal Class II malocclusions (rWALA3>rWALA2>rFA3>rFA2. In conclusion, mandibular dental and basal intercanine and intermolar widths were significantly different between the two groups. Compared with Skeletal Class II subjects, the mandibular archform was more flat for Skeletal Class III subjects.

  13. Dentofacial injuries in commercial motorcycle accidents in Cameroon

    African Journals Online (AJOL)

    Objective: To assess the pattern of dentofacial injuries in commercial motorcycle accidents among riders and passengers in Cameroon. Materials and Methods: This was a hospital based study conducted in 6 out of 10 regional capitals in the months of December 2011 to September 2012. Analyzed information included age, ...

  14. Effect of Class III bone anchor treatment on airway.

    Science.gov (United States)

    Nguyen, Tung; De Clerck, Hugo; Wilson, Michael; Golden, Brent

    2015-07-01

    To compare airway volumes and minimum cross-section area changes of Class III patients treated with bone-anchored maxillary protraction (BAMP) versus untreated Class III controls. Twenty-eight consecutive skeletal Class III patients between the ages of 10 and 14 years (mean age, 11.9 years) were treated using Class III intermaxillary elastics and bilateral miniplates (two in the infra-zygomatic crests of the maxilla and two in the anterior mandible). The subjects had cone beam computed tomographs (CBCTs) taken before initial loading (T1) and 1 year out (T2). Twenty-eight untreated Class III patients (mean age, 12.4 years) had CBCTs taken and cephalograms generated. The airway volumes and minimum cross-sectional area measurements were performed using Dolphin Imaging 11.7 3D software. The superior border of the airway was defined by a plane that passes through the posterior nasal spine and basion, while the inferior border included the base of the epiglottis to the lower border of C3. From T1 to T2, airway volume from BAMP-treated subjects showed a statistically significant increase (1499.64 mm(3)). The area in the most constricted section of the airway (choke point) increased slightly (15.44 mm(2)). The airway volume of BAMP patients at T2 was 14136.61 mm(3), compared with 14432.98 mm(3) in untreated Class III subjects. Intraexaminer correlation coefficients values and 95% confidence interval values were all greater than .90, showing a high degree of reliability of the measurements. BAMP treatment did not hinder the development of the oropharynx.

  15. Glenoid fossa position in Class III malocclusion associated with mandibular protrusion.

    Science.gov (United States)

    Innocenti, Cristina; Giuntini, Veronica; Defraia, Efisio; Baccetti, Tiziano

    2009-04-01

    Our aim in this study was to investigate the position of the glenoid fossa in subjects with Class III malocclusion associated with mandibular protrusion to better clarify the role of this craniofacial component in Class III skeletal disharmony. A sample of 30 subjects, aged 8 years +/- 6 months, with skeletal and dental Class III malocclusion associated with mandibular protrusion, normal skeletal vertical relationships, and normal mandibular dimensions, was compared with a control group of 33 subjects with skeletal and dental Class I relationships. The comparisons between the Class III group and the control group on the cephalometric measures for the assessment of glenoid fossa position were performed with the Mann-Whitney U test at P <0.05. Subjects with Class III malocclusion had a significantly more mesial position of the glenoid fossa, when compared with the control group as measured with 3 parameters. An anterior position of the glenoid fossa is a possible diagnostic anatomic feature of Class III malocclusion associated with mandibular protrusion. An effective measurement to evaluate glenoid fossa position in craniofacial relationships is the cephalometric distance from the glenoid fossa to the frontomaxillary-nasal suture.

  16. Sports-related dentofacial trauma among high school students in ...

    African Journals Online (AJOL)

    Objectives: To determine the prevalence and pattern of occurrence of sports - related dentofacial injuries among athletes participating in Rugby and Football in Nairobi, Kenya. Design: A descriptive cross-sectional study. Setting: Seventeen Secondary schools participating in either or both Rugby tournaments and the ...

  17. Evolution of Class III treatment in orthodontics.

    Science.gov (United States)

    Ngan, Peter; Moon, Won

    2015-07-01

    Angle, Tweed, and Moyers classified Class III malocclusions into 3 types: pseudo, dentoalveolar, and skeletal. Clinicians have been trying to identify the best timing to intercept a Class III malocclusion that develops as early as the deciduous dentition. With microimplants as skeletal anchorage, orthopedic growth modification became more effective, and it also increased the scope of camouflage orthodontic treatment for patients who were not eligible for orthognathic surgery. However, orthodontic treatment combined with orthognathic surgery remains the only option for patients with a severe skeletal Class III malocclusion or a craniofacial anomaly. Distraction osteogenesis can now be performed intraorally at an earlier age. The surgery-first approach can minimize the length of time that the malocclusion needs to worsen before orthognathic surgery. Finally, the use of computed tomography scans for 3-dimensional diagnosis and treatment planning together with advances in imaging technology can improve the accuracy of surgical movements and the esthetic outcomes for these patients. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

  18. Premaxillary-maxillary suture asymmetry in a juvenile Gorilla. Implications for understanding dentofacial growth and development.

    Science.gov (United States)

    Schwartz, J H

    1983-01-01

    A specimen of juvenile gorilla was found that had the premaxillary-maxillary suture coursing between the lateral deciduous incisor and deciduous canine on one side of the jaw, but between the central and lateral deciduous incisors on the other; in the latter, the suture also separates the alveolus of the lateral deciduous incisor from the crypt of the growing successional lateral incisor. Rather than dismiss this exception to the traditional dictum of tooth identification--which is based on the position to teeth relative to this suture--as some inconsequential anomaly, an attempt is made to understand how this can occur within the confines of present understanding of dentofacial growth and development and developmental theory. An hypothesis relating tooth and tooth class identification is presented in the context of ectomesenchymally predifferentiated stem progenitors and subsequent tooth class proliferation.

  19. The biowaiver extension for BCS class III drugs: the effect of dissolution rate on the bioequivalence of BCS class III immediate-release drugs predicted by computer simulation.

    Science.gov (United States)

    Tsume, Yasuhiro; Amidon, Gordon L

    2010-08-02

    The Biopharmaceutical Classification System (BCS) guidance issued by the FDA allows waivers for in vivo bioavailability and bioequivalence studies for immediate-release (IR) solid oral dosage forms only for BCS class I drugs. However, a number of drugs within BCS class III have been proposed to be eligible for biowaivers. The World Health Organization (WHO) has shortened the requisite dissolution time of BCS class III drugs on their Essential Medicine List (EML) from 30 to 15 min for extended biowaivers; however, the impact of the shorter dissolution time on AUC(0-inf) and C(max) is unknown. The objectives of this investigation were to assess the ability of gastrointestinal simulation software to predict the oral absorption of the BCS class I drugs propranolol and metoprolol and the BCS class III drugs cimetidine, atenolol, and amoxicillin, and to perform in silico bioequivalence studies to assess the feasibility of extending biowaivers to BCS class III drugs. The drug absorption from the gastrointestinal tract was predicted using physicochemical and pharmacokinetic properties of test drugs provided by GastroPlus (version 6.0). Virtual trials with a 200 mL dose volume at different drug release rates (T(85%) = 15 to 180 min) were performed to predict the oral absorption (C(max) and AUC(0-inf)) of the above drugs. Both BCS class I drugs satisfied bioequivalence with regard to the release rates up to 120 min. The results with BCS class III drugs demonstrated bioequivalence using the prolonged release rate, T(85%) = 45 or 60 min, indicating that the dissolution standard for bioequivalence is dependent on the intestinal membrane permeability and permeability profile throughout the gastrointestinal tract. The results of GastroPlus simulations indicate that the dissolution rate of BCS class III drugs could be prolonged to the point where dissolution, rather than permeability, would control the overall absorption. For BCS class III drugs with intestinal absorption patterns

  20. Morphometric Analysis of the Mandible in Subjects with Class III Malocclusion

    Directory of Open Access Journals (Sweden)

    Jin-Yun Pan

    2006-07-01

    Full Text Available This study evaluated the deformations that contribute to Class III mandibular configuration, employing geometric morphometric analysis. Lateral cephalograms of male and female groups of 100 young adults and 70 children with Class III malocclusion were compared to those of counterparts with normal occlusion. The sample included an equal number of both genders. The cephalographs were traced, and 12 homologous landmarks were identified and digitized. Average mandibular geometries were generated by means of Procrustes analysis. Thin-plate spline analysis was then applied to mandibular configurations to determine local form differences in male and female groups of adults and children with normal occlusion and Class III malocclusion. The mandibular morphology was significantly different between these two groups of male and female adults, and children (p < 0.0001. This spline analysis revealed an anteroposterior elongation of the mandible along the condylion-gnathion axis, showing an extension in the regions of the mandibular condyle and ramus, and of the anteroinferior portion of the mandibular symphysis in Class III groups. More extension was evident in Class III adults. The deformations in subjects with Class III malocclusion may represent a developmental elongation of the mandible anteroposteriorly, which leads to the appearance of a prognathic mandibular profile.

  1. Skeletal class III camouflage by mandibular incisor extraction: A case report

    OpenAIRE

    Janardhanan Kumaresan; Tamizharasi Senthil Kumar; Senthil Kumar

    2014-01-01

    Treatment planning in orthodontics plays a key role in determining the successful treatment of any kind of malocclusion. Skeletal class III malocclusions are generally difficult to treat because of the complex nature of the skeletal and dental manifestations they produce. Mild to moderate skeletal class III malocclusions sometimes have an acceptable facial profile where orthodontic camouflage is possible. In this case report, camouflage of a mild skeletal class III is done by the extraction o...

  2. A radiographic study of temporomandibular joints in skeletal class III malocclusion

    International Nuclear Information System (INIS)

    Kim, Sung Eun; Kim, Kae Duk

    2003-01-01

    To investigate the differences between the position of the mandibular condyles in temporomandibular joints of patients presenting with normal occlusion and skeletal class III malocclusion. Forty-two subjects with normal occlusion and thirty-seven subjects exhibiting skeletal class III malocclusion prior to orthodontic treatment were included in the study. Transcranial radiographs of each subject were taken at centric occlusion and 1 inch mouth opening. The positional relationship between the mandibular condyles with articular fossae and articular eminences at two positional states were evaluated and analyzed statistically. The mandibular condyles of the skeletal class III malocclusion group were found to be located more anteriorly from the center of the articular fossae compared to the normal occlusion group in centric occlusion. The mandibular condyles of the skeletal Class III malocclusion group were located more superiorly from the middle of articular height than those of the normal occlusion group in centric occlusion. However, these differences were not statistically significant. At 1 inch mouth opening, the mandibular condyles of the skeletal class III malocclusion group were placed more posteriorly from the articular eminences than those of the normal occlusion group. The mean angle of the articular eminence posterior slope were 56.51 .deg. ± 6.29 .deg. in the normal occlusion group and 60.37 .deg. ± 6.26 .deg. in the skeletal Class III malocclusion group. The mandibular condyles of the skeletal Class III malocclusion group were placed more anteriorly at centric occlusion and more posteriorly at 1 inch mouth opening when compared with those of the normal occlusion group.

  3. A radiographic study of temporomandibular joints in skeletal class III malocclusion

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sung Eun; Kim, Kae Duk [Chosun University College of Medicine, Kwangju (Korea, Republic of)

    2003-06-15

    To investigate the differences between the position of the mandibular condyles in temporomandibular joints of patients presenting with normal occlusion and skeletal class III malocclusion. Forty-two subjects with normal occlusion and thirty-seven subjects exhibiting skeletal class III malocclusion prior to orthodontic treatment were included in the study. Transcranial radiographs of each subject were taken at centric occlusion and 1 inch mouth opening. The positional relationship between the mandibular condyles with articular fossae and articular eminences at two positional states were evaluated and analyzed statistically. The mandibular condyles of the skeletal class III malocclusion group were found to be located more anteriorly from the center of the articular fossae compared to the normal occlusion group in centric occlusion. The mandibular condyles of the skeletal Class III malocclusion group were located more superiorly from the middle of articular height than those of the normal occlusion group in centric occlusion. However, these differences were not statistically significant. At 1 inch mouth opening, the mandibular condyles of the skeletal class III malocclusion group were placed more posteriorly from the articular eminences than those of the normal occlusion group. The mean angle of the articular eminence posterior slope were 56.51 .deg. {+-} 6.29 .deg. in the normal occlusion group and 60.37 .deg. {+-} 6.26 .deg. in the skeletal Class III malocclusion group. The mandibular condyles of the skeletal Class III malocclusion group were placed more anteriorly at centric occlusion and more posteriorly at 1 inch mouth opening when compared with those of the normal occlusion group.

  4. 25 CFR 291.15 - How long do Class III gaming procedures remain in effect?

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false How long do Class III gaming procedures remain in effect... ENTERPRISES CLASS III GAMING PROCEDURES § 291.15 How long do Class III gaming procedures remain in effect? Class III gaming procedures remain in effect for the duration specified in the procedures or until...

  5. Early class III occlusal tendency in children and its selective management

    Directory of Open Access Journals (Sweden)

    Kapur A

    2008-09-01

    Full Text Available Class III malocclusion may develop in children as a result of an inherent growth abnormality, i.e., true class III malocclusion, or as a result of premature occlusal contacts causing forward functional shift of the mandible, which is known as pseudo class III malocclusion. These cases, if not treated at the initial stage of development, interfere with normal growth of the skeletal bases and may result in severe facial deformities. The treatment should be carried out as early as possible with the aim of permitting normal growth. This paper deals with the selection of an appropriate treatment approach from the various current options available for early intervention in children developing class III occlusal tendencies; the different clinical features are depicted in the three case reports.

  6. Do Class III patients have a different growth spurt than the general population?

    Science.gov (United States)

    Lee, Yun-Sik; Lee, Shin-Jae; An, Hongseok; Donatelli, Richard E; Kim, Soo-Hwan

    2012-11-01

    Understanding the timing and length of the growth spurt of Class III prognathic patients is fundamental to the strategy of interceptive orthopedic orthodontics as well as to the timing of orthognathic surgery. Consequently, this study was undertaken to determine whether there are any significant differences in the stature growth pattern of Class III subjects compared with non-Class III subjects and the general population. Twelve-year longitudinal stature growth data were collected for 402 randomly selected adolescents in the general population, 55 Class III mandibular prognathic patients, and 37 non-Class III patients. The growth data were analyzed by using the traditional linear interpolation method and nonlinear growth functions. The 6 stature growth parameters were measured: age at takeoff, stature at takeoff, velocity at takeoff, age at peak height velocity, stature at peak height velocity, and velocity at peak height velocity. Comparisons in the stature growth parameters and 15 cephalometric variables among the general population, Class III subjects, and non-Class III subjects were made with multivariate analysis. Patients with Class III prognathism did not have different growth parameters compared with Class II subjects or the general population. This study does not allow meaningful conclusions with regard to the relationship of mandibular size and stature growth pattern. The application of nonlinear growth curves vs the traditional linear interpolation method was also discussed. Copyright © 2012 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

  7. Crown-root morphology of lower incisors in patients with class III malocclusion.

    Science.gov (United States)

    Wang, Bo; Shen, Guofang; Fang, Bing; Zhang, Li

    2012-07-01

    The purpose of this study was to investigate the crown-root morphology of lower incisors in patients with class III malocclusion using cone-beam computed tomography. Cone-beam computed tomography images were analyzed from 53 adult class I patients (group 1), 37 preadolescent class III patients (group 2), and 66 adult class III patients (group 3) comprising 3 divisions (divisions 1, 2, and 3 corresponded to mild, moderate, and severe class III malocclusions). The size and crown-root angulations of lower incisors in different groups and divisions were statistically appraised with group 1 used as the control group. No significant differences were found for the size of lower incisors among different groups and divisions (P > 0.05). Compared with group 1, the crown-root angulations of lower incisors in groups 2 and 3 were significantly larger (P lower incisors of division 3 rather than divisions 2 and 3 exhibited larger crown-root angulations (P lower incisors in class III patients during orthodontic and orthognathic treatment, especially in severe ones.

  8. Craniofacial changes in Class III malocclusion as related to skeletal and dental maturation.

    Science.gov (United States)

    Baccetti, Tiziano; Reyes, Brian C; McNamara, James A

    2007-08-01

    In this large cross-sectional study, we aimed to analyze growth trends in white subjects with Class III malocclusion using both skeletal and dental maturation staging. The sample consisted of 1091 pretreatment lateral cephalometric records of Class III patients (560 female, 531 male). Cephalometric dentoskeletal measurements were compared at subsequent stages in cervical vertebral maturation and Hellman's categorization of dental development by means of ANOVA with Bonferroni post-hoc tests in both sexes separately. The findings indicated that, in Class III malocclusion, the pubertal peak in mandibular growth occurs between stages 3 and 4 of cervical vertebral maturation, with average increases in total mandibular length of about 8 and 5.5 mm in Class III boys and girls, respectively. Significant changes in total mandibular length occur until young adulthood (18 years on average), with increases between late maturation stages (4 through 6) that were twice as large as in subjects with normal occlusion for the Class III females, and 3 times as large as in subjects with normal occlusion for the Class III males. Growth trends toward accentuated Class III profile and increased vertical dimension of the face also become apparent at late developmental stages (corresponding with complete eruption of the second and third molars).

  9. Skeletal class III camouflage by mandibular incisor extraction: A case report

    Directory of Open Access Journals (Sweden)

    Janardhanan Kumaresan

    2014-01-01

    Full Text Available Treatment planning in orthodontics plays a key role in determining the successful treatment of any kind of malocclusion. Skeletal class III malocclusions are generally difficult to treat because of the complex nature of the skeletal and dental manifestations they produce. Mild to moderate skeletal class III malocclusions sometimes have an acceptable facial profile where orthodontic camouflage is possible. In this case report, camouflage of a mild skeletal class III is done by the extraction of a single mandibular incisor, which helped in maintaining the profile of the patient and also in the correction of crowding in the mandibular anterior region.

  10. Early treatment of Class III malocclusion with a tandem traction bow appliance

    Directory of Open Access Journals (Sweden)

    Sneha Basaveshwar Valgadde

    2016-01-01

    Full Text Available Since Class III malocclusion is progressive in nature, the facial growth of Class III malocclusion worsens with age. Class III malocclusion is associated with a deviation in the sagittal relationship of the maxilla and the mandible, characterized by a deficient maxilla, retrognathic mandible, or a combination of both. The early orthopedic treatment of Class III malocclusions, at the end of primary dentition or the beginning of mixed dentition, prior to growth spurt, allows the accomplishment of successful results, providing facial balance, modifying the maxillofacial growth and development, and in many instances, preventing a future surgical treatment by increasing the stability. Many treatment approaches can be found in the literature regarding orthopedic and orthodontic treatment of Class III malocclusion, including intra- and extra-oral appliances. The major problem with extraoral anchorage has been of patient compliance due to its physical appearance. The case report presents an intraoral modified tandem appliance for maxillary protraction that has been used clinically to achieve successful results without relying much on patient co-operation.

  11. Articulación de fones en individuos clase esqueletal I,II y III Speech patterns in skeletal class I, II and III subjects

    Directory of Open Access Journals (Sweden)

    Pía Villanueva

    2009-09-01

    Full Text Available OBJETIVO: determinar los patrones de articulación de fones consonánticos en sujetos de habla española chilena clases I, II y III esqueletal; comparar las diferencias fonéticas que existan entre clases esqueletales. MÉTODOS: se seleccionaron 54 individuos que cumplían con los criterios de inclusión determinados mediante un examen clínico intraoral y a través del análisis de Ricketts, y se conformaron los grupos de estudio de pacientes clases esqueletales I, II y III. Se les realizó un examen fonoarticulatorio estandarizado para determinar los fones modificados y el patrón articulatorio compensatorio realizado. RESULTADOS: se observaron cambios en el punto de articulación de fones consonánticos en las tres clases esqueletales, con diferencias significativas en los grupos de fones anteriores y medios entre pacientes clases I y II, sólo en el grupo de los fones anteriores entre pacientes I y III. Entre pacientes clases II y III no se observaron diferencias significativas. Se reportan modificaciones y compensaciones cualitativamente distintas entre las clases esqueletales. CONCLUSIONES: en relación a pacientes clase I, los pacientes clase II o III, presentan distinto grado de modificación en el punto de articulación de fones consonánticos. Las diferencias observadas se relacionan con los patrones esqueletales propios de cada clase.PURPOSE: to determine the consonant phonemes articulation patterns in Chilean skeletal class I, II and III Spanish speakers and compare their phonetic differences. METHODS: fifty-four skeletal class I, II and III subjects were selected, based on intraoral clinical examination and Ricketts cephalometric analysis, constituting the study groups. A standardized phonoarticulatory test was applied to each patient to determine the modified phonemes and their compensatory patterns. RESULTS: the findings indicate changes in articulation in all three groups. Significant differences were found in anterior and medium

  12. Correction of a severe Class III malocclusion.

    Science.gov (United States)

    Arslan, Seher Gündüz; Kama, Jalan Devecioglu; Baran, Sedat

    2004-08-01

    The success of early orthopedic treatment in patients with Class III anomalies depends on facial skeletal development and type of treatment. This case report describes the treatment of a 12.6-year-old girl who had a severe Class III malocclusion with a 6-mm anterior crossbite, a deep overbite, a narrow maxilla, and unerupted maxillary canines. The treatment plan included rapid palatal expansion to expand the maxilla, reverse headgear to correct the maxillary retrognathia, a removable anterior inclined bite plane to correct the anterior crossbite and the deep overbite, and fixed edgewise appliances to align the teeth. One canine was brought into alignment, but the other was placed in occlusion in its transposed position. Ideal overjet and overbite relationships were established, and the final esthetic result was pleasing.

  13. Má oclusão Classe III de Angle com discrepância ântero-posterior acentuada Angle Class III malocclusion with severe anteroposterior disharmony

    Directory of Open Access Journals (Sweden)

    Marcos Alan Vieira Bittencourt

    2009-02-01

    Full Text Available A má oclusão Classe III de Angle é caracterizada por uma discrepância dentária ântero-posterior, que pode ou não estar acompanhada por alterações esqueléticas. Em geral, o aspecto facial fica bastante comprometido, sendo justamente esse fator, na maioria das vezes, que motiva o paciente a procurar pelo tratamento. Este caso foi apresentado à Diretoria do Board Brasileiro de Ortodontia e Ortopedia Facial (BBO, representando a categoria 4, ou seja, uma má oclusão com discrepância ântero-posterior acentuada, Classe III, com ANB menor ou igual a -2º, como parte dos requisitos para a obtenção do título de Diplomado pelo BBO.Angle Class III malocclusion is characterized by an anteroposterior dental discrepancy which may or may not be accompanied by skeletal changes. In general, distressed by a significantly compromised facial aspect, patients tend to seek treatment. This case was presented to the Brazilian Board of Orthodontics and Facial Orthopedics (BBO, as representative of Category 4, i.e., a malocclusion with severe anteroposterior discrepancy, Class III, and ANB Angle equal to or smaller than -2º, as part of the requirements for obtaining the BBO Diploma.

  14. Semilongitudinal cephalometric study of craniofacial growth in untreated Class III malocclusion.

    Science.gov (United States)

    Alexander, Ann E Zionic; McNamara, James A; Franchi, Lorenzo; Baccetti, Tiziano

    2009-06-01

    Class III growth in white subjects is poorly characterized because of the low prevalence of the disharmony and the clinical tendency to treat this condition early. The purpose of this study was to investigate craniofacial growth changes by using longitudinal cephalometric records of white subjects with untreated Class III malocclusions to provide comparison data for studies of Class III treatment outcomes. Longitudinal records of 103 subjects were analyzed. Annual incremental growth changes in craniofacial variables from early childhood to late adolescence were examined for each sex. Inferential statistics were applied to changes in mandibular length, midfacial length, and lower anterior facial height of each sex (Wilcoxon tests) and between sexes (Mann-Whitney U tests). In the girls, the adolescent spurt in mandibular growth occurred between the ages of 10 and 12 years. In the boys, the adolescent mandibular growth spurt was between 12 and 15 years. Statistically significant growth changes in the average increments of growth of these linear measurements occurred in both sexes between 12 and 15 years. Adolescent peaks in midfacial growth were at prepubertal ages in both sexes. During childhood (5-7 years), much craniofacial growth occurred. Moreover, there was considerable mandibular growth relative to the maxilla in Class III subjects after the adolescent growth spurt. White Class III subjects showed definite worsening of the relative mandibular prognathism and sagittal skeletal discrepancy between the jaws with growth. The growth pattern of 3 fundamental cephalometric measurements (lower anterior face height, midfacial length, and mandibular length) exhibited differences between Class III male and female subjects in both the timing and the size of average growth increments in the adolescent growth spurt.

  15. The surgical management of severe dentofacial infections (DFI)-a prospective study.

    Science.gov (United States)

    Bowe, Conor M; O'Neill, Maeve A; O'Connell, John E; Kearns, Gerard J

    2018-04-27

    Dentofacial infections (DFI) lead to morbidity and rarely, mortality. We hypothesised that certain clinical and laboratory parameter factors may be associated with a more severe course and an increased length of stay. We designed a prospective study that included all patients admitted with a DFI to the Oral and Maxillofacial Department between July 2014 and July 2015. A total of 125 were enrolled. We found that serum concentration of CRP on admission and increasing number of fascial spaces involved by the infection were significant predictors of hospital stay (p = 0.02 and p = 0.01, respectively). The average length of stay for a dentofacial infection requiring admission was 4.5 days. Most patients require surgical intervention in combination with intravenous antibiotics for successful resolution. Improved and timely access to primary dental care is likely to reduce the burden for patients their families and the acute hospital service as a consequence of advanced DFI.

  16. 25 CFR 291.13 - When do Class III gaming procedures for an Indian tribe become effective?

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false When do Class III gaming procedures for an Indian tribe... ECONOMIC ENTERPRISES CLASS III GAMING PROCEDURES § 291.13 When do Class III gaming procedures for an Indian tribe become effective? Upon approval of Class III gaming procedures for the Indian tribe under either...

  17. 77 FR 48167 - Approved Tribal-State Class III Gaming Compact; Indian Gaming

    Science.gov (United States)

    2012-08-13

    ... DEPARTMENT OF THE INTERIOR Bureau of Indian Affairs Approved Tribal--State Class III Gaming Compact; Indian Gaming AGENCY: Bureau of Indian Affairs, Interior. ACTION: Notice of Approved Tribal--State Class III Gaming Compact. SUMMARY: This notice publishes an approval of the gaming compact between...

  18. Policy and procedures for classification of Class III groundwater at UMTRA Project sites

    International Nuclear Information System (INIS)

    1989-03-01

    The US Environmental Protection Agency (EPA) has recently proposed groundwater regulations for the US Department of Energy's )DOE) Uranium Mill Tailings Remedial Action (UMTRA) Project. These regulations allow the application of supplemental standards at UMTRA Project sites in specific situations. The designation of groundwater as Class III permits the application of supplemental standards. This document discusses a final UMTRA Project policy and procedures for identifying Class III groundwater, including identification of a review area, definition of water quality, quantification of aquifer yield, and identification of methods reasonably employed for public water supply systems. These items, either individually or collectively, need to be investigated in order to determine if groundwaters at UMTRA Project sites are Class III. This document provides a framework for the DOE to determine Class III groundwaters

  19. Contemporary solutions for managing Class III malocclusion

    Directory of Open Access Journals (Sweden)

    Nathamuni Rengarajan Krishnaswamy

    2015-01-01

    Full Text Available Although patients with Class III malocclusions constitute a small percentage of the average orthodontic practice, providing them with optimal treatment is a daunting task. The treatment approach is dependent upon the growth status of the individual and the severity of the skeletal dysplasia. For growing individuals, facemask therapy to protract the maxilla is ineffective because of its dependence on dental anchorage to bring forth skeletal correction. Orthodontic camouflage in nongrowing mild skeletal Class III individuals is met with limited success because of the anatomical boundaries and the conventional biomechanics. Orthognathic surgery to correct the maxillomandibular relations is time-consuming, and the facial esthetics is compromised during the orthodontic decompensation period. Contemporary solutions to overcome these limitations are now viable with the use of temporary anchorage devices and by performing surgery prior to orthodontic decompensation. The rationale for employing these contemporary approaches will be discussed in this study with illustrative cases.

  20. Impact of dentofacial deformity and motivation for treatment: a qualitative study.

    Science.gov (United States)

    Ryan, Fiona S; Barnard, Matthew; Cunningham, Susan J

    2012-06-01

    Satisfaction with the outcome of orthognathic treatment is generally high; however, an important minority remains dissatisfied with the results. The reasons for this could be inadequate patient understanding and preparation, external motivation, and unrealistic expectations. In-depth appreciation of these issues can be obtained using qualitative research methods, but there is a paucity of qualitative research in this field. This was a cross-sectional qualitative study of orthognathic patients conducted at a teaching hospital. In-depth interviews were conducted with 18 prospective orthognathic patients. The data were managed by using the framework approach and analyzed by using the critical qualitative theory. Two main themes were explored in the interviews: the impact of the dentofacial deformity and the motivation for treatment. Both the everyday problems of living with a dentofacial deformity and the motivation for seeking treatment could be classified either as exclusively practical (including functional and structural), exclusively psychological (including psychosocial and esthetic), or a combination. Different coping strategies were also described. The sources of motivation ranged between purely external to purely internal, with most subjects between these 2 extremes. In this article, we present a classification of the impact of dentofacial deformity that is a refinement of the traditional one that includes esthetic, functional, and psychosocial factors. The motivating factors, together with the triggers for accessing treatment and the source of motivation, are generally linked directly or indirectly to the problem and the impact of the condition. However, in a few patients, the motivation might not relate to the impact of the problem but to a complex array of other factors such as personality, upbringing, and relationships. Therefore, clinicians should not make assumptions but explore these factors on an individual basis without preconceived ideas. Copyright

  1. A benefit-risk assessment of class III antiarrhythmic agents

    DEFF Research Database (Denmark)

    Brendorp, Bente; Pedersen, Oledyg; Torp-Pedersen, Christian

    2002-01-01

    , which differentiates them from the others. However, all have potential serious adverse events. Proarrhythmia, especially torsade de pointes, is a common problem making the benefit-risk ratio of these drugs a key question. Class III drugs have been evaluated in different settings: primary and secondary...... prevention of ventricular arrhythmias and in treatment of atrial fibrillation or flutter. Based on existing evidence there is no routine indication for antiarrhythmic drug therapy other than beta-blockers in patients at high risk of sudden death. Subgroup analyses of trials with amiodarone and dofetilide......-intervals or - in the future - from genetic testing. Class III drugs are effective in converting atrial fibrillation to sinus rhythm and for the maintenance of sinus rhythm after conversion. This is currently by far the most important indication for this class of drugs. As defined by recent guidelines, amiodarone...

  2. Class III camouflage treatment: what are the limits?

    Science.gov (United States)

    Burns, Nikia R; Musich, David R; Martin, Chris; Razmus, Thomas; Gunel, Erdogan; Ngan, Peter

    2010-01-01

    The purpose of this study was to determine the skeletal, dental, and soft-tissue changes in response to camouflage Class III treatment. Thirty patients (average age, 12.4 + or - 1.0 years) with skeletal Class III malocclusions who completed comprehensive nonextraction orthodontic treatment were studied. Skeletal, dental, and soft-tissue changes were determined by using published cephalometric analyses. The quality of orthodontic treatment was standardized by registering the peer assessment rating index on the pretreatment and posttreatment study models. The change in the level of gingival attachment with treatment was determined on the study casts. The results were compared with a group of untreated subjects. Data were analyzed with repeated measures analysis and paired t tests. The average change in the Wits appraisal was greater in the treated group (1.2 + or - 0.1 mm) than in the control group (-0.5 + or - 0.3 mm). The average peer assessment rating index score improved from 33.5 to 4.1. No significant differences were found for the level of gingival attachments between the treatment and control groups. The sagittal jaw relationship (ANB angle) did not improve with camouflage treatment. A wide range of tooth movements compensated for the skeletal changes in both groups. The upper and lower limits for incisal movement to compensate for Class III skeletal changes were 120 degrees to the sella-nasion line and 80 degrees to the mandibular plane, respectively. Greater increases in the angle of convexity were found in the treated group, indicating improved facial profiles. Greater increases in length of the upper lip were found in the treated group, corresponding to the changes in the hard tissues with treatment. Significant dental and soft-tissue changes can be expected in young Class III patients treated with camouflage orthodontic tooth movement. A wide range of skeletal dysplasias can be camouflaged with tooth movement without deleterious effects to the

  3. Conservative treatment of Angle Class III malocclusion with anterior crossbite

    Directory of Open Access Journals (Sweden)

    João Hélder Ferreira de Aguiar

    2015-08-01

    Full Text Available Angle Class III malocclusion is characterized by anteroposterior dental discrepancy which might be associated or not with skeletal changes. Class III molar relationship is associated with vertical or lingually tipped mandibular incisors and a usually concave profile. These characteristics seriously affect facial esthetics and most frequently are the reason why patients seek orthodontic treatment. This case was presented to the committee of the Brazilian Board of Orthodontics and Facial Orthopedics (BBO as part of the requisites to become a BBO Diplomate.

  4. Camouflage treatment of skeletal Class III malocclusion with conventional orthodontic therapy.

    Science.gov (United States)

    Park, Jae Hyun; Yu, Joseph; Bullen, Ryan

    2017-04-01

    Nonextraction camouflage treatment along with Class III elastics was used to treat a 39-year-old woman with a skeletal Class III pattern and a low mandibular plane angle and short lower anterior facial height. The total active treatment time was 26 months. Her occlusion, smile esthetics, and soft tissue profile were significantly improved after treatment. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

  5. Inheritance of craniofacial features in Colombian families with class III malocclusion

    Directory of Open Access Journals (Sweden)

    L Otero

    2010-02-01

    Full Text Available L Otero, L Quintero, D Champsaur, E SimancaPontificia Universidad Javeriana, Bogotá, ColombiaIntroduction: The inheritance of class III malocclusion has been well documented, but the inheritance of craniofacial structures in Colombian families with this malocclusion has been not yet reported.Patients and methods: The study sample of 25 families comprised 186 untreated orthodontic individuals from 8 to 60 years old. Pedigrees were drawn using Cyrillic software. Complete family histories for each proband were ascertained and the affection status of relatives was confirmed by lateral cephalograms and facial and dental photographs. Analysis of variance and odds ratio test for each parameter was performed to estimate inheritance from parents to offspring and to determine similar phenotypic features in relatives.Results: The analysis of the pedigrees suggests autosomal dominant inheritance. The craniofacial characteristics that showed more resemblance between parents and offspring were middle facial height, shorter anterior cranial base and mandibular prognathism. In contrast the protrusion of upper lip and maxillary retrusion were the phenotypic features that contributed to class III in the majority of families.Conclusion: Knowledge of the inheritance of craniofacial phenotypes in class III malocclusion will enable the design of new therapies to treat this malocclusion.Keywords: inheritance, craniofacial, phenotype, class III malocclusion

  6. Orthodontics-surgical combination therapy for Class III skeletal malocclusion

    Directory of Open Access Journals (Sweden)

    M S Ravi

    2012-01-01

    Full Text Available The correction of skeletal Class III malocclusion with severe mandibular prognathism in an adult individual requires surgical and Othodontic combination therapy. The inter disciplinary approach is the treatment of choice in most of the skeletal malocclusions. A case report of an adult individual with Class III malocclusion, having mandibular excess in sagittal and vertical plane and treated with orthodontics,, bilateral sagittal split osteotomy and Le - Forte I osteotomy for the correction of skeletal, dental and soft tissue discrepancies is herewith presented. The surgical-orthodontic combination therapy has resulted in near-normal skeletal, dental and soft tissue relationship, with marked improvement in the facial esthetics in turn, has helped the patient to improve the self-confidence level.

  7. Abordagem clínica não-cirúrgica no tratamento da má oclusão de Classe III Non-surgical approaches to Class III malocclusions treatment

    Directory of Open Access Journals (Sweden)

    Eustáquio A. Araújo

    2008-12-01

    Full Text Available A abordagem clínica não-cirúrgica da Classe III coloca-se entre os grandes desafios da Ortodontia e vem, desde sempre, gerando controvérsia entre clínicos e pesquisadores. Alguns defendem a tese de que o crescimento e o desenvolvimento do complexo craniofacial são determinados geneticamente e, portanto, inalteráveis. Para esses, a correção da grande maioria de casos de Classe III passará por intervenções orto-cirúrgicas, devendo a terapia ser realizada assim que cessar o período mais ativo do crescimento. Por outro lado, há aqueles que, mesmo concordando com o peso da hereditariedade na etiologia da Classe III, acreditam ser possível modificar o padrão e a direção do crescimento e, através de uma abordagem não-cirúrgica, minimizar a má oclusão ou até mesmo tratá-la com sucesso. Em face da controvérsia, quais seriam as possibilidades ortodônticas? Inúmeros são os relatos de que uma intervenção adequada, em momento adequado, acompanhada de um estudo do padrão familiar, pode, muitas vezes, minimizar o desenvolvimento de uma Classe III. Procedimentos selecionados com critério podem reduzir a indicação de intervenções cirúrgicas e proporcionar resultados positivos e duradouros. Há evidências clínicas e científicas de que algumas decisões terapêuticas podem mudar o curso de muitos prognósticos sombrios.Orthodontic management of the Class III malocclusion has been a constant challenge to the orthodontic profession and remains a controversial issue among clinicians and researches. Some support the belief that growth and size of the craniofacial complex are genetically predetermined and cannot be changed. They assume that the great majority of Class III cases are "untreatable" and that they are due to surgical intervention after growth has been completed. Even agreeing that heredity plays a major role in this type os deviation, others support the contention that the pattern and direction of growth can be

  8. Treatment of Class III malocclusion: the key role of the occlusal plane.

    Science.gov (United States)

    Raymond, Jean-Louis; Matern, Olivier; Grollemund, Bruno; Bacon, William

    2010-01-01

    Patients with a Class III malocclusion generally present with a counterclockwise inclination of the occlusal plane, converging with Camper's line towards the front. This slope has an effect on mandibular movement (forward posture) and on chewing mechanisms in general. As dysfunctional mastication is likely to influence facial growth and inter-arch stability negatively, early orthopedic therapy of the occlusal unbalance concurrent with Class III malocclusion is justified. The aim of this article is to present a method of Class III treatment based on a correct re-orientation of the occlusal plane in order to achieve an optimal masticatory mechanism, essential for stability of early treatment outcomes. Copyright © 2010 Società Italiana di Ortodonzia (SIDO). Published by Elsevier Srl. All rights reserved.

  9. The Effect of Excipients on the Permeability of BCS Class III Compounds and Implications for Biowaivers.

    Science.gov (United States)

    Parr, Alan; Hidalgo, Ismael J; Bode, Chris; Brown, William; Yazdanian, Mehran; Gonzalez, Mario A; Sagawa, Kazuko; Miller, Kevin; Jiang, Wenlei; Stippler, Erika S

    2016-01-01

    Currently, the FDA allows biowaivers for Class I (high solubility and high permeability) and Class III (high solubility and low permeability) compounds of the Biopharmaceutics Classification System (BCS). Scientific evidence should be provided to support biowaivers for BCS Class I and Class III (high solubility and low permeability) compounds. Data on the effects of excipients on drug permeability are needed to demonstrate that commonly used excipients do not affect the permeability of BCS Class III compounds, which would support the application of biowaivers to Class III compounds. This study was designed to generate such data by assessing the permeability of four BCS Class III compounds and one Class I compound in the presence and absence of five commonly used excipients. The permeability of each of the compounds was assessed, at three to five concentrations, with each excipient in two different models: Caco-2 cell monolayers, and in situ rat intestinal perfusion. No substantial increases in the permeability of any of the compounds were observed in the presence of any of the tested excipients in either of the models, with the exception of disruption of Caco-2 cell monolayer integrity by sodium lauryl sulfate at 0.1 mg/ml and higher. The results suggest that the absorption of these four BCS Class III compounds would not be greatly affected by the tested excipients. This may have implications in supporting biowaivers for BCS Class III compounds in general.

  10. A roentgenocephalometric study on the condylar displacement in angle's class I and III malocclusion

    International Nuclear Information System (INIS)

    Lee, Jeong Hwa; Park, Chang Seo

    1986-01-01

    The purpose of this investigation was to know correlation of mean values between centric occlusion and centric relation by the cephalogram in Angle's Class I and III malocclusion subjects. 22 adults with Angle's Class I malocclusion (17 men and 5 women, 21 to 27 years of age) and 14 adult with Angle's class III malocclusion (10 men and 4 women, 21 to 27 years of age) were selected form the dental students in Yonsei University. Each subject was given two lateral cephalometric radiographics and cephalometric analysis was performed. All data form these analyses was recorded and statistically processed with CYBER computer system. The results were obtained as follows: 1. There was a strong positive correlation between centric occlusion and centric relation in all subjects with Angle's Class I and III malocclusion. 2. In Angle's Class I malocclusion, measurements in lower facial height revealed significant difference between centric occlusion and centric relation (p<0.05). 3.When the mandible was movement was 1.27 mm (0.2-2.8 mm) in Angle's Class I malocclusion, 1.70 mm(0.55-4.15 mm) in Angle's Class III malocclusion, and 1.44 mm (0.2- 4.15 mm) in all subjects.

  11. Comparison of temporomandibular joint and ramus morphology between class II and class III cases before and after bi-maxillary osteotomy.

    Science.gov (United States)

    Iguchi, Ran; Yoshizawa, Kunio; Moroi, Akinori; Tsutsui, Takamitsu; Hotta, Asami; Hiraide, Ryota; Takayama, Akihiro; Tsunoda, Tatsuya; Saito, Yuki; Sato, Momoko; Baba, Nana; Ueki, Koichiro

    2017-12-01

    The purpose of this study was to compare changes in temporomandibular joint (TMJ) and ramus morphology between class II and III cases before and after sagittal split ramus osteotomy (SSRO) and Le Fort I osteotomy. The subjects were 39 patients (78 sides) who underwent bi-maxillary surgery. They consisted of 2 groups (18 class II cases and 21 class III cases), and were selected randomly from among patients who underwent surgery between 2012 and 2016. The TMJ disc tissue and joint effusion were assessed by magnetic resonance imaging (MRI) and the TMJ space, condylar height, ramus height, ramus inclination and condylar square were assessed by computed tomography (CT), pre- and post-operatively. The number of joints with anterior disc displacement in class II was significantly higher than that in class III (p bi-maxillary surgery. The findings of the numerical analysis also demonstrated that reduction of condylar volume occurred frequently in class II, although TMJ disc position classification did not change significantly, as previously reported. Copyright © 2017 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

  12. Orthodontic camouflage of skeletal Class III malocclusion with miniplate: a case report

    OpenAIRE

    Farret, Marcel Marchiori; Farret, Milton M. Benitez; Farret, Alessandro Marchiori

    2016-01-01

    ABSTRACT Introduction: Skeletal Class III malocclusion is often referred for orthodontic treatment combined with orthognathic surgery. However, with the aid of miniplates, some moderate discrepancies become feasible to be treated without surgery. Objective: To report the case of a 24-year-old man with severe skeletal Angle Class III malocclusion with anterior crossbite and a consequent concave facial profile. Methods: The patient refused to undergo orthognathic surgery; therefore, orthodo...

  13. Management of severe skeletal Class III malocclusion with bimaxillary orthognathic surgery

    Directory of Open Access Journals (Sweden)

    Jitesh Haryani

    2016-01-01

    Full Text Available Orthognathic surgery in conjunction with fixed orthodontics is a common indication for interdisciplinary management of severe skeletal Class III malocclusion. A thorough analysis of pretreatment investigations and development of a surgical visual treatment objective is essential to plan the type of surgical technique required. Bimaxillary orthognathic surgery is the most common type of surgical procedure for severe skeletal discrepancies. The present case report is a combined ortho-surgical team management of a skeletally Class III patient. The severity of the case required bilateral upper first premolar extraction for dentoalveolar decompensation and simultaneous “Two-jaw surgery” with maxillary advancement of 4 mm and mandibular setback of 7 mm. Postsurgery, a pleasing good facial profile was achieved with Class II molar relation and positive overjet.

  14. 25 CFR 291.3 - When may an Indian tribe ask the Secretary to issue Class III gaming procedures?

    Science.gov (United States)

    2010-04-01

    ... III gaming procedures? 291.3 Section 291.3 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ECONOMIC ENTERPRISES CLASS III GAMING PROCEDURES § 291.3 When may an Indian tribe ask the Secretary to issue Class III gaming procedures? An Indian tribe may ask the Secretary to issue Class III...

  15. 25 CFR 291.12 - Who will monitor and enforce tribal compliance with the Class III gaming procedures?

    Science.gov (United States)

    2010-04-01

    ... Class III gaming procedures? 291.12 Section 291.12 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR ECONOMIC ENTERPRISES CLASS III GAMING PROCEDURES § 291.12 Who will monitor and enforce tribal compliance with the Class III gaming procedures? The Indian tribe and the State may have an agreement...

  16. Thin-plate spline analysis of the cranial base in subjects with Class III malocclusion.

    Science.gov (United States)

    Singh, G D; McNamara, J A; Lozanoff, S

    1997-08-01

    The role of the cranial base in the emergence of Class III malocclusion is not fully understood. This study determines deformations that contribute to a Class III cranial base morphology, employing thin-plate spline analysis on lateral cephalographs. A total of 73 children of European-American descent aged between 5 and 11 years of age with Class III malocclusion were compared with an equivalent group of subjects with a normal, untreated, Class I molar occlusion. The cephalographs were traced, checked and subdivided into seven age- and sex-matched groups. Thirteen points on the cranial base were identified and digitized. The datasets were scaled to an equivalent size, and statistical analysis indicated significant differences between average Class I and Class III cranial base morphologies for each group. Thin-plate spline analysis indicated that both affine (uniform) and non-affine transformations contribute toward the total spline for each average cranial base morphology at each age group analysed. For non-affine transformations, Partial warps 10, 8 and 7 had high magnitudes, indicating large-scale deformations affecting Bolton point, basion, pterygo-maxillare, Ricketts' point and articulare. In contrast, high eigenvalues associated with Partial warps 1-3, indicating localized shape changes, were found at tuberculum sellae, sella, and the frontonasomaxillary suture. It is concluded that large spatial-scale deformations affect the occipital complex of the cranial base and sphenoidal region, in combination with localized distortions at the frontonasal suture. These deformations may contribute to reduced orthocephalization or deficient flattening of the cranial base antero-posteriorly that, in turn, leads to the formation of a Class III malocclusion.

  17. Anteroposterior condylar position: a comparative study between subjects with normal occlusion and patients with Class I, Class II Division 1, and Class III malocclusions.

    Science.gov (United States)

    Fraga, Marcelo Reis; Rodrigues, Andréia Fialho; Ribeiro, Luiz Claudio; Campos, Marcio José da Silva; Vitral, Robert Willer Farinazzo

    2013-10-29

    The present study aimed to determine and compare the anteroposterior position of the condyle in the mandibular fossa between groups of asymptomatic subjects with normal occlusion and asymptomatic subjects with Class I, Class II Division 1, and Class III malocclusions. Thirty persons with normal occlusion, 30 with Class I malocclusion, 30 with Class II Division 1, and 30 with Class III had computed tomography scans of their temporomandibular joints. The anterior joint space/posterior joint space (AJS/PJS) ratio was determined for the right and left joints. The paired t test was used to analyze the AJS/PJS ratio between both sides for each group. The ANOVA test was applied to verify the differences between the groups for the measurements of the right and left sides. In case the ANOVA test confirmed significance, the Dunnett's t test was performed to compare the groups of malocclusion with that of normal occlusion. The paired t test between the AJS/PJS relationships in the right and left sides showed the following p values: Class I (0.168), Class II Division 1 (0.662), Class III (0.991), and normal occlusion (0.390). The ANOVA test showed a p value of 0.445 for the comparisons of the right side and 0.040 for the left side. The Dunnett's t test demonstrated a statistically significant difference between the Class II group and the normal occlusion group (p value of 0.026) in the joints of the left side. Bilateral symmetry and lack of condyle centralization were common characteristics among all groups. The greatest condylar decentralization was observed in the Class II group, whereas the least condylar decentralization was found in the normal occlusion group.

  18. Regulation of MIR165/166 by class II and class III homeodomain leucine zipper proteins establishes leaf polarity

    DEFF Research Database (Denmark)

    Merelo, Paz; Ram, Hathi; Caggiano, Monica Pia

    2016-01-01

    A defining feature of plant leaves is their flattened shape. This shape depends on an antagonism between the genes that specify adaxial (top) and abaxial (bottom) tissue identity; however, the molecular nature of this antagonism remains poorly understood. Class III homeodomain leucine zipper (HD-...... show that class III and class II HD-ZIP proteins act together to repress MIR165/166 via a conserved cis-element in their promoters. Organ morphology and tissue patterning in plants, therefore, depend on a bidirectional repressive circuit involving a set of miRNAs and its targets....

  19. A new modified tandem appliance for management of developing Class III malocclusion

    OpenAIRE

    Sukh, Ram; Singh, Gyan P; Tandon, Pradeep

    2013-01-01

    Most developing Class III patients display a retruded maxilla. Early intervention in mixed dentition is associated with better patient compliance and possibly a better orthopedic response, which can produce favorable results. The aim of this article is to present the fabrication of the new modified tandem appliance and its use in management of developing Class III malocclusion. The therapeutic results of a new modified tandem appliance are presented in an 8 year-old male patient with anterior...

  20. Factors influencing orthodontic treatment time for non-surgical Class III malocclusion

    Directory of Open Access Journals (Sweden)

    Lívia Monteiro Bichara

    Full Text Available ABSTRACT To improve orthodontic treatment efficiency, orthodontists must know which variables could interfere with orthodontic treatment time. Objective: To identify variables and their effect size on orthodontic treatment time of Class III malocclusion. Material and Methods: Forty-five Class III malocclusion cases were selected from 2008 patients’ records. Clinical charts, cephalometric radiographs, and pre and posttreatment dental casts were evaluated. Age, sex, PAR index at T1 and T2, overjet, missing teeth, extractions, number of treatment phases, missed appointments, appliance breakages, and cephalometric variables SNA, SNB, ANB, Wits, SnGoGn, CoA, CoGn, IMPA, 1.PP were investigated by multiple linear regression analysis and stepwise method at p2 (patients who missed more than 2 appointments, to detect the influence of this data on treatment time and the quality of the treatment (PAR T2. Results: Average treatment time was 30.27 months. Multiple regression analysis showed that missed appointment (R2=0.4345 and appliance breakages (R2=0.0596 are the only variables able to significantly predict treatment duration. Treatment time for patients who missed more than 2 appointments was nearly one year longer. However, no significant influence on PAR T2 was observed for those patients. Conclusion: Orthodontic treatment duration in Class III patients is mainly influenced by factors related to patient compliance. Patients who missed more appointments did not show worse orthodontic finishing, but longer treatment. No occlusal, cephalometric, or demographic variable obtained before treatment was able to give some significant prediction about treatment time in Class III patients.

  1. Pseudo Class III malocclusion

    Directory of Open Access Journals (Sweden)

    Fadia M. Al-Hummayani

    2016-04-01

    Full Text Available The treatment of deep anterior crossbite is technically challenging due to the difficulty of placing traditional brackets with fixed appliances. This case report represents a none traditional treatment modality to treat deep anterior crossbite in an adult pseudo class III malocclusion complicated by severely retruded, supraerupted upper and lower incisors. Treatment was carried out in 2 phases. Phase I treatment was performed by removable appliance “modified Hawley appliance with inverted labial bow,” some modifications were carried out to it to suit the presented case. Positive overbite and overjet was accomplished in one month, in this phase with minimal forces exerted on the lower incisors. Whereas, phase II treatment was performed with fixed appliances (braces to align teeth and have proper over bite and overjet and to close posterior open bite, this phase was accomplished within 11 month.

  2. Base of the skull morphology and Class III malocclusion in patients with unilateral cleft lip and palate

    Directory of Open Access Journals (Sweden)

    Mariana Maciel Tinano

    2015-02-01

    Full Text Available OBJECTIVE: The aim of the present study was to determine the morphological differences in the base of the skull of individuals with cleft lip and palate and Class III malocclusion in comparison to control groups with Class I and Class III malocclusion. METHODS: A total of 89 individuals (males and females aged between 5 and 27 years old (Class I, n = 32; Class III, n = 29; and Class III individuals with unilateral cleft lip and palate, n = 28 attending PUC-MG Dental Center and Cleft Lip/Palate Care Center of Baleia Hospital and PUC-MG (CENTRARE were selected. Linear and angular measurements of the base of the skull, maxilla and mandible were performed and assessed by a single calibrated examiner by means of cephalometric radiographs. Statistical analysis involved ANCOVA and Bonferroni correction. RESULTS: No significant differences with regard to the base of the skull were found between the control group (Class I and individuals with cleft lip and palate (P > 0.017. The cleft lip/palate group differed from the Class III group only with regard to CI.Sp.Ba (P = 0.015. Individuals with cleft lip and palate had a significantly shorter maxillary length (Co-A in comparison to the control group (P < 0.001. No significant differences were found in the mandible (Co-Gn of the control group and individuals with cleft lip and palate (P = 1.000. CONCLUSION: The present findings suggest that there are no significant differences in the base of the skull of individuals Class I or Class III and individuals with cleft lip and palate and Class III malocclusion.

  3. Accounts of bullying on Twitter in relation to dentofacial features and orthodontic treatment.

    Science.gov (United States)

    Chan, A; Antoun, J S; Morgaine, K C; Farella, M

    2017-04-01

    Social media offers an accessible resource for gaining valuable insights into the social culture of bullying. The purpose of this study was to qualitatively analyse Twitter posts for common themes relating to dentofacial features, braces and bullying. Twitter's database was searched from 2010 to 2014 using keywords relevant to bullying, teeth and orthodontics. Two investigators assessed the Twitter posts, and selected those that conveyed the experiences or opinions of bullying victims. The posts were qualitatively analysed using thematic analysis. Of the 548 posts screened, 321 were included in the final sample. Four primary categories relating to 'dental-related bullying' were identified: (i) morphological features, (ii) psychological and psychosocial impact, (iii) coping mechanisms and (iv) the role of family. Bullied individuals reported a diverse range of psychological impacts and coping mechanisms. Secondary categories were also identified. Family members, for example, were found to play both a contributory and mediatory role in bullying. In summary, social media can provide new and valuable information about the causal factors and social issues associated with oral health-related bullying. Importantly, some coping mechanisms may mitigate the negative effects of bullying. © 2017 John Wiley & Sons Ltd.

  4. Guide to preemption of state-law claims against Class III PMA medical devices.

    Science.gov (United States)

    Whitney, Daniel W

    2010-01-01

    There is a perception that the express preemption holding of the Supreme Court in Riegel v. Medtronic, 552 U.S. 312(2008), immunizes medical device manufacturers from common law personal injury actions involving Class III devices that received FDA clearance under a premarket approval application (PMA). In the aftermath of Riegel, many lawsuits involving Class III PMA devices have been dismissed by district courts applying the new heightened pleading standard of Bell Atlantic Corp. v. Twombly, 550 U.S. 544 (2007). Other lawsuits involving Class III PMA devices premised on fraud-on-FDA have been dismissed based on the implied preemption holding of the Supreme Court in Buckman v. Plaintiffs' Legal Comm., 531 U.S. 341 (2001). When these decisions are carefully analyzed together with Medtronic, Inc. v. Lohr, 518 U.S. 470 (1996), which found no preemption regarding a Class III device receiving FDA clearance through the 510(k) mechanism, it is apparent that the preemption defense does not apply universally to Class III PMA devices. The overall methodology for framing a non-preempted claim is to first identify conduct which violated the PMA or other specific requirements related to safety or efficacy. If such conduct can also be stated in terms of a breach of a parallel common law duty (e.g, failure to warn under strict liability or negligence, manufacturing defect or breach of warranty), then it would appear the claim is not preempted. Alternatively, regardless of a specific violation, common law remedies are not preempted by general CGMP requirements.

  5. [Cephalometric analysis in cases with Class III malocclusions].

    Science.gov (United States)

    Rak, D

    1989-01-01

    Various orthodontic class III anomalies, classified into several experimental groups, and eugnathic occlusions serving as controls were studied by roentgencephalometry. The objective of the study was to detect possible distinctions in the quantitative values of two variables chosen and to select the variables which most significantly discriminate the group of class III orthodontic anomalies. Attempts were made to ascertain whether or not there were sex-related differences. The teleroentgenograms of 269 examines, aged 10-18 years, of both sexes were analyzed. The experimental group consisted of 89 examinees class III orthodontic anomalies. The control group consisted of 180 examines with eugnathic occlusion. Latero-lateral skull roentgenograms were taken observing the rules of roentgenocephalometry. Using acetate paper, the drawings of profile teleroentgenograms were elaborated and the reference points and lines were entered. A total of 38 variables were analyzed, of which there were 10 linear, 19 angular, and 8 variables were obtained by mathematical calculation; the age variable was also analyzed. In statistical analyses an electronic computer was used. The results are presented in tables and graphs. The results obtained showed that: --compared to the findings in the control group, the subjects in the experimental group displayed significant changes in the following craniofacial characteristics a negative difference in the position of the apical base of the jaw, manifest concavity of the osseous profile and diminished convexity of the profile of soft parts, retroinclination of the lower incisors, mandibular prognathism, increased mandibular angle and increased mandibular proportion compared to maxillary and the anterior cranial base; --with regard to the sex of the examinees, only four linear variables of significantly discriminating character were selected, so that in can be concluded that there were no significant sex differences among the morphological

  6. A three-dimensional soft tissue analysis of Class III malocclusion: a case-controlled cross-sectional study.

    Science.gov (United States)

    Johal, Ama; Chaggar, Amrit; Zou, Li Fong

    2018-03-01

    The present study used the optical surface laser scanning technique to compare the facial features of patients aged 8-18 years presenting with Class I and Class III incisor relationship in a case-control design. Subjects with a Class III incisor relationship, aged 8-18 years, were age and gender matched with Class I control and underwent a 3-dimensional (3-D) optical surface scan of the facial soft tissues. Landmark analysis revealed Class III subjects displayed greater mean dimensions compared to the control group most notably between the ages of 8-10 and 17-18 years in both males and females, in respect of antero-posterior (P = 0.01) and vertical (P = 0.006) facial dimensions. Surface-based analysis, revealed the greatest difference in the lower facial region, followed by the mid-face, whilst the upper face remained fairly consistent. Significant detectable differences were found in the surface facial features of developing Class III subjects.

  7. [Morphological analysis of alveolar bone of anterior mandible in high-angle skeletal class II and class III malocclusions assessed with cone-beam computed tomography].

    Science.gov (United States)

    Ma, J; Jiang, J H

    2018-02-18

    To evaluate the difference of features of alveolar bone support under lower anterior teeth between high-angle adults with skeletal class II malocclusions and high-angle adults presenting skeletal class III malocclusions by using cone-beam computed tomography (CBCT). Patients who had taken the images of CBCT were selected from the Peking University School and Hospital of Stomatology between October 2015 and August 2017. The CBCT archives from 62 high-angle adult cases without orthodontic treatment were divided into two groups based on their sagittal jaw relationships: skeletal class II and skeletal class III. vertical bone level (VBL), alveolar bone area (ABA), and the width of alveolar bone were measured respectively at the 2 mm, 4 mm, 6 mm below the cemento-enamel junction (CEJ) level and at the apical level. After that, independent samples t-tests were conducted for statistical comparisons. The ABA of the mandibular alveolar bone in the area of lower anterior teeth was significantly thinner in the patients of skeletal class III than those of skeletal class II, especially in terms of the apical ABA, total ABA on the labial and lingual sides and the ABA at 6 mm below CEJ level on the lingual side (Pclass III than those of skeletal class II, especially regarding the apical level on the labial and lingual side and at the level of 4 mm, 6 mm below CEJ level on the lingual side (Pclass III adult patients with high-angle when compared with the sample of high-angle skeletal class II adult cases. We recommend orthodontists to be more cautious in treatment of high-angle skeletal class III patients, especially pay attention to control the torque of lower anterior teeth during forward and backward movement, in case that the apical root might be absorbed or fenestration happen in the area of lower anterior teeth.

  8. Expression of a cucumber class III chitinase and Nicotiana plumbaginifolia class I glucanase genes in transgenic potato plants

    NARCIS (Netherlands)

    Moravcikova, J.; Matusikova, I.; Libantova, J.; Bauer, M.; Mlynarova, L.

    2004-01-01

    The genes encoding for a cucumber class III chitinase and Nicotiana plumbaginifolia class I glucanase were co-introduced into Slovak potato (Solanum tuberosum L.) breeding line 116/86 using Agrobacterium tumefaciens. For both transgenes the number of integrated copies and level of RNA expression

  9. Lower incisor dentoalveolar compensation and symphysis dimensions among Class I and III malocclusion patients with different facial vertical skeletal patterns.

    Science.gov (United States)

    Molina-Berlanga, Núria; Llopis-Perez, Jaume; Flores-Mir, Carlos; Puigdollers, Andreu

    2013-11-01

    To compare lower incisor dentoalveolar compensation and mandible symphysis morphology among Class I and Class III malocclusion patients with different facial vertical skeletal patterns. Lower incisor extrusion and inclination, as well as buccal (LA) and lingual (LP) cortex depth, and mandibular symphysis height (LH) were measured in 107 lateral cephalometric x-rays of adult patients without prior orthodontic treatment. In addition, malocclusion type (Class I or III) and facial vertical skeletal pattern were considered. Through a principal component analysis (PCA) related variables were reduced. Simple regression equation and multivariate analyses of variance were also used. Incisor mandibular plane angle (P Class I P  =  .03 and Class III P  =  .01) and a positive correlation with LH (Class I P  =  .01 and Class III P  =  .02) in both groups. Within the Class III group, there was a negative correlation between the mandibular plane and LP (P  =  .02). PCA showed that the tendency toward a long face causes the symphysis to elongate and narrow. In Class III, alveolar narrowing is also found in normal faces. Vertical facial pattern is a significant factor in mandibular symphysis alveolar morphology and lower incisor positioning, both for Class I and Class III patients. Short-faced Class III patients have a widened alveolar bone. However, for long-faced and normal-faced Class III, natural compensation elongates the symphysis and influences lower incisor position.

  10. Forecasting craniofacial growth in individuals with class III malocclusion by computational modelling.

    Science.gov (United States)

    Auconi, Pietro; Scazzocchio, Marco; Defraia, Efisio; McNamara, James A; Franchi, Lorenzo

    2014-04-01

    To develop a mathematical model that adequately represented the pattern of craniofacial growth in class III subject consistently, with the goal of using this information to make growth predictions that could be amenable to longitudinal verification and clinical use. A combination of computational techniques (i.e. Fuzzy clustering and Network analysis) was applied to cephalometric data derived from 429 untreated growing female patients with class III malocclusion to visualize craniofacial growth dynamics and correlations. Four age groups of subjects were examined individually: from 7 to 9 years of age, from 10 to 12 years, from 13 to 14 years, and from 15 to 17 years. The connections between pathway components of class III craniofacial growth can be visualized from Network profiles. Fuzzy clustering analysis was able to define further growth patterns and coherences of the traditionally reported dentoskeletal characteristics of this structural imbalance. Craniofacial growth can be visualized as a biological, space-constraint-based optimization process; the prediction of individual growth trajectories depends on the rate of membership to a specific 'winner' cluster, i.e. on a specific individual growth strategy. The reliability of the information thus gained was tested to forecast craniofacial growth of 28 untreated female class III subjects followed longitudinally. The combination of Fuzzy clustering and Network algorithms allowed the development of principles for combining multiple auxological cephalometric features into a joint global model and to predict the individual risk of the facial pattern imbalance during growth.

  11. Non-surgical Management of Skeletal Class III Malocclusion with Bilateral Posterior Crossbite: A Case Report.

    Science.gov (United States)

    Kumari, Lalima; Nayan, Kamal

    2016-12-01

    A 16-year-old female patient with skeletal Class III malocclusion and bilateral posterior cross bite complaining of difficulty in chewing was treated orthodontically without surgery (camouflage treatment). The treatment comprised of fixed orthodontic treatment with MBT prescription (0.022˝×0.028˝ slot) using quad helix appliance for bilateral expansion of maxillary arch and Class III elastics for occlusal correction. Post-treatment records showed normal overbite and overjet with acceptable occlusion. So with this treatment strategy of expanding the maxillary arch using a quad helix appliance and use of Class III elastics, we achieved a good result with optimal occlusion.

  12. Skeletal, dental and soft tissue changes in Class III patients treated with fixed appliances and lower premolar extractions.

    Science.gov (United States)

    Abu Alhaija, Elham S J; Al-Khateeb, Susan N

    2011-05-01

    Mild Class III malocciusions can be treated by upper incisor proclination and lower incisor retroclination following extraction of the lower first premolars. To compare the skeletal, dental and soft tissue changes in Class III patients treated with fixed appliances, Class III traction and lower first premolar extractions with the changes in a group of untreated Class III patients. The Treatment group consisted of 30 Class III patients (Mean age 13.69 +/- 1.48 years) who were treated by upper and lower fixed appliances, Class III intermaxillary traction and lower first premolar extractions for 2.88 +/- 1.12 years. The Control group consisted of 20 untreated Class III patients (Mean age 13.51 +/- 0.95) matched for age and gender. The T1 to T2 changes in the treated and untreated groups were compared using a paired t-test while differences between the two groups were compared with an independent t-test. During treatment, the upper incisors were proclined about 1 degree and the lower incisors were retroclined 8 degrees. Small, but statistically significant changes in SNB, Wits and the overlying soft tissues accompanied the changes in incisor inclination. At the end of treatment a positive overbite and overjet were achieved. The increase in lower facial height in the Treatment group was comparable with the change in the Control group. A range of mild to moderate Class III malocclusions can be treated by dentoalveolar compensation.

  13. A study of Class III treatment: orthodontic camouflage vs orthognathic surgery.

    Science.gov (United States)

    Georgalis, Katherine; Woods, Michael G

    2015-11-01

    To evaluate the differences in pretreatment and post-treatment characteristics of Class III patients treated with orthodontic camouflage or orthognathic surgery, and to compare the range of skeletal, dental and soft tissue changes that are likely to occur with treatment, with particular reference to the influence of extractions on the resultant incisor angulations. Pretreatment and post-treatment cephalograms of 31 Class III orthodontically-camouflaged patients and 36 Class III surgical patients (without genioplasty) were obtained from one specialist practice. From the surgical group, 26 pre-surgical lateral cephalograms were also obtained. Inclusion criteria for the two groups were at least three of the following: (1) an ANB angle of 1 degree or less, (2) a Wits appraisal less than -4 mm, (3) an incisal overjet ≤ 0 mm, and (14) a Class III molar relationship. All lateral cephalograms were traced and digitised and a number of skeletal, dental and soft tissue variables were measured. The camouflage and surgical groups were also divided into premolar extraction and non-extraction subgroups to allow for a specific analysis of extraction effects. Before treatment, the surgical group demonstrated, on average, a more severe skeletal discrepancy and increased dental compensations, compared with the orthodontically camouflaged group. After treatment, the mean SNA angle was greater, the ANB angle was more positive, the Wits appraisal was closer to ideal and the lower incisors were less retroclined in the surgery group. There was a small mean reduction in horizontal chin projection in the surgery group compared with a small increase in the camouflage group. The mentolabial fold and the lower lip curve were deeper, on average, and the lips less retrusive after surgery. There was a mean increase in upper incisor proclination during treatment in both the surgical and camouflage groups with a greater increase in the camouflage group. There was a significant reduction in upper

  14. [Orthodontic treatment of Class III patients with mandibular asymmetry].

    Science.gov (United States)

    Duan, Yin-Zhong; Huo, Na; Chen, Lei; Chen, Xue-Peng; Lin, Yang

    2008-12-01

    To investigate the treatment outcome of Class III patients with dental, functional and mild skeletal mandibular asymmetry. Thirty-five patients (14 males and 21 females) with dental, functional and mild skeletal mandibular asymmetry were selected. The age range of the patients was 7 - 22 years with a mean age of 16.5 years. Dental mandibular asymmetry was treated with expansion of maxillary arch to help the mandible returning to normal position. Functional mandibular asymmetry was treated with activator or asymmetrical protraction and Class III elastics. Mild skeletal mandibular asymmetry was treated with camouflage treatment. Good occlusal relationships were achieved and facial esthetics was greatly improved after orthodontic treatment in patients with dental and functional mandibular asymmetry. However, patients with skeletal mandibular asymmetry should be treated with both extraction and genioplasty. Orthodontic treatment was suitable for patients with dental and functional mandibular asymmetry, while combined orthodontics and surgery could get good results in patients with skeletal mandibular asymmetry.

  15. Compensatory canine angulation in angle Class II and III patients

    Directory of Open Access Journals (Sweden)

    Mauro Carlos Agner Busato

    2009-09-01

    Full Text Available The aim of this study was to evaluate the occurence of compensation in mesiodistal axial inclinations of canines in skeletal malocclusions patients. The sample consisted of 25 Angle Class II, division 1 malocclusion (group 1 and 19 Angle Class III malocclusion patients (group 2. After measurement of dental angulations through a method that associates plaster model photography and AutoCad software, comparisons between the groups were performed by T-test for independent samples. Results showed that there was no statistically significant difference (p < 0.05 between groups, when maxillary canine angulations were compared. Regarding the mandibular canines, there was a statistically significant difference in dental angulation, expressed by 3.2° for group 1 and 0.15° for group 2. An upright position tendency for mandibular canines was observed in the Angle Class III sample. This configures a pattern of compensatory coronary positioning, since the angulation of these teeth makes them occupy less space in the dental arch and consequently mandibular incisors can be in a more retracted position in the sagittal plane.

  16. Orthodontic retreatment using anchorage with miniplate to camouflage a Class III skeletal pattern

    OpenAIRE

    Farret,Marcel Marchiori

    2016-01-01

    ABSTRACT This manuscript describes the treatment of a 27-year-old patient who was previously treated with two maxillary first premolar extractions. The patient had skeletal Class III malocclusion, Class III canine relationship, anterior crossbite, and a concave profile. As the patient refused orthognathic surgery, a miniplate was used on the right side of the lower arch as an anchorage unit after the extraction of mandibular first premolars, aiding the retraction of anterior teeth. At the end...

  17. Load Flow and Short Circuit Analysis of the Class III Power System of HANARO

    Energy Technology Data Exchange (ETDEWEB)

    Kim, H. K.; Jung, H. S

    2005-12-15

    The planning, design, and operation of electric power system require engineering studies to assist in the evaluation of the system performance, reliability, safety and economics. The Class III power of HANARO supplies power for not only HANARO but also RIPF and IMEF. The starting current of most ac motors is five to ten times normal full load current. The loads of the Class III power are connected in consecutive orders at an interval for 10 seconds to avoid excessive voltage drop. This technical report deals with the load flow study and motor starting study for the Class III power of HANARO using ETAP(Electrical Transient Analyzer Program) to verify the capacity of the diesel generator. Short-circuit studies are done to determine the magnitude of the prospective currents flowing throughout the power system at various time intervals after a fault occurs. Short-circuit studies can be performed at the planning stage in order to help finalize the system layout, determine voltage levels, and size cables, transformers, and conductors. From this study, we verify the short circuit current capacity of air circuit breaker(ACB) and automatic transfer switch(ATS) of the Class III power.

  18. The Effect of Excipients on the Permeability of BCS Class III Compounds and Implications for Biowaivers

    OpenAIRE

    Parr, Alan; Hidalgo, Ismael J.; Bode, Chris; Brown, William; Yazdanian, Mehran; Gonzalez, Mario A.; Sagawa, Kazuko; Miller, Kevin; Jiang, Wenlei; Stippler, Erika S.

    2015-01-01

    Purpose Currently, the FDA allows biowaivers for Class I (high solubility and high permeability) and Class III (high solubility and low permeability) compounds of the Biopharmaceutics Classification System (BCS). Scientific evidence should be provided to support biowaivers for BCS Class I and Class III (high solubility and low permeability) compounds. Methods Data on the effects of excipients on drug permeability are needed to demonstrate that commonly used excipients do not affect the permea...

  19. Long-term outcomes of Class III treatment with mandibular cervical headgear followed by fixed appliances.

    Science.gov (United States)

    Baccetti, Tiziano; Rey, Diego; Oberti, Giovanni; Stahl, Franka; McNamara, James A

    2009-09-01

    To evaluate the stability of the outcomes of mandibular cervical headgear (MCH) and fixed appliance-treated Class III patients at a long-term posttreatment (5 years) observation, compared with well-matched untreated Class III controls, following a previous report on the short-term outcomes of this protocol. The treated group consisted of 20 patients with dentoskeletal Class III malocclusions treated with a two-phase protocol consisting of MCH and fixed appliances, while the control group comprised 18 untreated subjects with similar dentoskeletal Class III malocclusion. Lateral cephalograms of both patients and controls were analyzed at two time points: posttreatment (PT), after two-phase treatment; and long term (LT). All patients were at a postpubertal stage of skeletal maturity at PT, and they showed CS6 at LT, thus revealing completion of pubertal craniofacial growth. In the long term, the treatment group showed significantly smaller values for mandibular length (Co-Gn), SNB angle, maxillomandibular differential, and molar relation. When compared with the controls, the treated patients exhibited also greater values for ANB angle, Wits appraisal, and overjet at LT. No significant difference between the two groups was found for the changes occurring from PT to LT. Favorable dentoskeletal outcomes induced by MCH and fixed appliances remained stable in the long term; untreated Class III malocclusion did not show any tendency toward self-improvement during the postpubertal interval.

  20. The assessment of dentofacial esthetics in restorative dentistry: a review of the literature.

    Science.gov (United States)

    Frese, Cornelia; Staehle, Hans Joerg; Wolff, Diana

    2012-05-01

    The authors conducted a literature review to determine how dentofacial esthetics can be evaluated in restorative dentistry and which quantifiable clinical parameters can be used for this assessment of dentofacial esthetics. The authors selected 35 studies that focused on assessment strategies for dental professionals. The primary inclusion criteria were intraoral and extraoral esthetic assessment methods and indexes or rating scales evaluating esthetics in restorative dentistry. The studies' protocols and assessment methods were heterogeneous. The authors grouped the studies into six categories according to topic: golden proportion, soft-tissue measurement, smile and smile line assessment, orofacial indexes and scales, incisor proportion and angulation, and facial esthetics. These categories included various esthetic parameters, including the smile line, lip line, incisal offset, location of dental and facial midline, incisor angulations and width to height ratios of the maxillary anterior teeth, gingival contour, and root coverage and papilla height. These parameters should be considered when providing dental treatment in the anterior area, as they allow for quantification and objective judgment. The findings of this review might increase interest in a comprehensive dental esthetic index that allows for objective quantification and intrastudy and interstudy comparison of dental treatment outcomes.

  1. Proteomics computational analyses suggest that baculovirus GP64 superfamily proteins are class III penetrenes

    Directory of Open Access Journals (Sweden)

    Garry Robert F

    2008-02-01

    Full Text Available Abstract Background Members of the Baculoviridae encode two types of proteins that mediate virus:cell membrane fusion and penetration into the host cell. Alignments of primary amino acid sequences indicate that baculovirus fusion proteins of group I nucleopolyhedroviruses (NPV form the GP64 superfamily. The structure of these viral penetrenes has not been determined. The GP64 superfamily includes the glycoprotein (GP encoded by members of the Thogotovirus genus of the Orthomyxoviridae. The entry proteins of other baculoviruses, group II NPV and granuloviruses, are class I penetrenes. Results Class III penetrenes encoded by members of the Rhabdoviridae and Herpesviridae have an internal fusion domain comprised of beta sheets, other beta sheet domains, an extended alpha helical domain, a membrane proximal stem domain and a carboxyl terminal anchor. Similar sequences and structural/functional motifs that characterize class III penetrenes are located collinearly in GP64 of group I baculoviruses and related glycoproteins encoded by thogotoviruses. Structural models based on a prototypic class III penetrene, vesicular stomatitis virus glycoprotein (VSV G, were established for Thogoto virus (THOV GP and Autographa california multiple NPV (AcMNPV GP64 demonstrating feasible cysteine linkages. Glycosylation sites in THOV GP and AcMNPV GP64 appear in similar model locations to the two glycosylation sites of VSV G. Conclusion These results suggest that proteins in the GP64 superfamily are class III penetrenes.

  2. [Class III surgical patients facilitated by accelerated osteogenic orthodontic treatment].

    Science.gov (United States)

    Wu, Jia-qi; Xu, Li; Liang, Cheng; Zou, Wei; Bai, Yun-yang; Jiang, Jiu-hui

    2013-10-01

    To evaluate the treatment time and the anterior and posterior teeth movement pattern as closing extraction space for the Class III surgical patients facilitated by accelerated osteogenic orthodontic treatment. There were 10 skeletal Class III patients in accelerated osteogenic orthodontic group (AOO) and 10 patients in control group. Upper first premolars were extracted in all patients. After leveling and alignment (T2), corticotomy was performed in the area of maxillary anterior teeth to accelerate space closing.Study models of upper dentition were taken before orthodontic treatment (T1) and after space closing (T3). All the casts were laser scanned, and the distances of the movement of incisors and molars were digitally measured. The distances of tooth movement in two groups were recorded and analyzed. The alignment time between two groups was not statistically significant. The treatment time in AOO group from T2 to T3 was less than that in the control group (less than 9.1 ± 4.1 months). The treatment time in AOO group from T1 to T3 was less than that in the control group (less than 6.3 ± 4.8 months), and the differences were significant (P 0.05). Accelerated osteogenic orthodontic treatment could accelerate space closing in Class III surgical patients and shorten preoperative orthodontic time. There were no influence on the movement pattern of anterior and posterior teeth during pre-surgical orthodontic treatment.

  3. Má oclusão Classe III de Angle, subdivisão direita, tratada sem exodontias e com controle de crescimento Angle Class III malocclusion, subdivision right, treated without extractions and with growth control

    Directory of Open Access Journals (Sweden)

    Sérgio Henrique Casarim Fernandes

    2010-12-01

    Full Text Available A Classe III de Angle é uma má oclusão caracterizada por discrepâncias anteroposteriores dentárias e faciais, normalmente acompanhadas por alterações esqueléticas, com componente genético associado. O diagnóstico precoce e correto e o tratamento adequado são de suma importância para promover o controle do crescimento e evitar recidivas. Este artigo relata o tratamento, executado em duas fases, de uma paciente do sexo feminino de 12 anos de idade, apresentando uma má oclusão de Classe III de Angle, subdivisão direita, com mordida cruzada anterior em máxima intercuspidação habitual (MIH e topo em relação cêntrica (RC, apresentando, ainda, falta de espaço na maxila, que foi tratada sem exodontias e com controle de crescimento. Esse caso foi apresentado à Diretoria do Board Brasileiro de Ortodontia e Ortopedia Facial (BBO, representando a categoria 1, ou seja, uma má oclusão Classe III de Angle, tratada sem exodontias e com controle de crescimento, como parte dos requisitos para a obtenção do título de Diplomado pelo BBOAngle Class III malocclusion is characterized by anteroposterior dental and facial discrepancies usually accompanied by skeletal changes associated with a genetic component. Early, accurate diagnosis and appropriate treatment are of paramount importance to promote growth control and prevent relapse. This article reports the two-phase treatment of a female patient, aged 12 years, with an Angle Class III, subdivision right malocclusion with anterior crossbite in maximum intercuspation (MIC and end-on bite in centric relation, further presenting with lack of maxillary space. The case was treated without extractions and with growth control. This case was presented to the Brazilian Board of Orthodontics and Facial Orthopedics (BBO as representative of Category 1, i.e., Angle Class III malocclusion treated without tooth extractions, as part of the requirements for obtaining the BBO Diploma

  4. Orthodontic and dentofacial orthopedic management of juvenile idiopathic arthritis: a systematic review of the literature.

    Science.gov (United States)

    von Bremen, J; Ruf, S

    2011-08-01

    To systematically review the literature published on orthodontic treatment principles in patients with juvenile idiopathic arthritis (JIA). Several electronic databases (PubMed, Medpilot, Web of Science, and DIMDI) and orthodontic and rheumatologic literature were systematically searched for studies published until May 2010. The articles were rated by two independent reviewers and included after three selection steps (title-abstract-full text). Articles had to be studies performed on ≥ 5 patients with a disease onset before the age of 16. The selection process resulted in the inclusion of three publications on dentofacial orthopedics and six on combined surgical orthodontic therapy. The three studies on dentofacial orthopedics aimed to improve the mandibular retrusion by means of removable functional appliances (activator). Whereas these orthodontic approaches comprised relatively large and homogeneous patient samples (14, 22, and 72 subjects, aged 6-16), the surgical studies were basically case series with a large age span of the patients (5-12 subjects, aged 10-44). In these surgical treatment approaches, orthodontics was limited to pre-surgical leveling and post-surgical finishing, while the skeletal discrepancy was treated surgically by a variety of techniques (costochondral grafts, bilateral sagittal spilt osteotomy, Le Fort I, and genioplasty). The treatment goals of both approaches were improvement of esthetics and function and/or pain reduction, and both approaches showed satisfactory results. Because of the heterogeneity of the subject material and the low level of evidence of the papers, it is difficult to draw any conclusions on the orthodontic/dentofacial orthopedic management of JIA. It appears as if removable functional appliances may be beneficial in adolescent patients with JIA. © 2011 John Wiley & Sons A/S.

  5. Auditory characteristics of individuals with temporomandibular dysfunctions and dentofacial deformities

    Directory of Open Access Journals (Sweden)

    Tatiane Totta

    2013-10-01

    Full Text Available OBJECTIVE: To investigate whether there is any relationship between otological as well as vestibular symptoms, audiological findings and type of temporomandibular disorder (articular, muscular and mixed; and to check the distribution of the temporomandibular disorders (TMD dysfunction degree in the research population. METHODS: A retrospective study involving 30 patients of both sexes, aged between 18 and 49 years old, diagnosed with TMD and dentofacial deformities, who were subject to clinical evaluation (muscle palpation, auscultation of temporomandibular joint during mandibular motion and measurement of jaw movement, audiological testing (pure tone audiometry and immittance testing and two questionnaires, one on otological and vestibular symptoms and the other on TMD anamnesis. Based on both the anamnesis questionnaire and the clinical assessment, the subjects were divided according to the type and degree of TMD dysfunction (mild, moderate and severe, and compared regarding the occurrence of auditory signs and symptoms, vestibular symptoms and audiological findings according to TMD type. RESULTS: The anamnesis questionnaire demonstrated higher prevalence (83.33% of severe TMD. Subjects with mixed TMD had more complaints about hypoacusis than those with muscular TMD (p < 0.05. The results showed no change in either audiological and immittance testing for all assessed individuals. CONCLUSION: Otological symptoms are present in subjects with TMD and dentofacial deformities, regardless of the classification of TMD (articular, muscular or mixed. Those with mixed TMD may have higher incidence of complaints about hypoacusis than subjects with muscular TMD. Further studies are needed to investigate the relationship between otological symptoms and the different types of TMD.

  6. Strategies to finish orthodontic treatment with a Class III molar relationship: three patient reports.

    Science.gov (United States)

    Farret, Milton M B; Farret, Marcel M; Farret, Alessandro M

    2009-01-01

    The purpose of this article is to review treatment concepts for patients with congenitally missing teeth in the mandible, for patients in whom teeth in only the mandibular arch were extracted, or for patients with Class III camouflage treatment. The therapy result in these situations is a Class III molar relationship. With this type of intercuspation, esthetic and functional aspects must be observed. © 2009 BY QUINTESSENCE PUBLISHING CO, INC.

  7. Combination of expansion and orthognathic surgery in a severe hyperdivergent skeletal Class III malocclusion

    Directory of Open Access Journals (Sweden)

    Anadha Gujar

    2016-01-01

    Full Text Available Class III malocclusions with a severe hyperdivergent growth pattern are very complex to plan and treat. This case report describes the treatment of an adult with a skeletal Class III malocclusion with a midface deficiency, severe bilateral posterior crossbite, and a severe hyperdivergent growth pattern by a combination of a bonded rapid maxillary expansion appliance and surgical procedure of Le Fort I osteotomy for maxillary advancement.

  8. Maxillary canine-first premolar bilateral transposition in a Class III patient: A case report.

    Science.gov (United States)

    Potrubacz, Maciej Iancu; Tepedino, Michele; Chimenti, Claudio

    2016-05-01

    Tooth transposition is a rare dental anomaly that often represents a challenge for the clinician. The case of a girl with skeletal Class III malocclusion and concomitant maxillary canine-first premolar bilateral transposition, followed from 7 to 17 years of age, is presented. After a first phase of treatment aimed at resolving the Class III malocclusion, the transposition was maintained and the case finalized with a multibracket appliance.

  9. Treatment in Borderline Class III Malocclusion: Orthodontic Camouflage (Extraction) Versus Orthognathic Surgery.

    Science.gov (United States)

    Rabie, A-Bakr M; Wong, Ricky W K; Min, G U

    2008-01-01

    To investigate the differences in morphological characteristics of borderline class III patients who had undergone camouflage orthodontic treatment or orthognathic surgery, and to compare the treatment effects between these two modalities. Cephalograms of 25 patients (13 orthodontic, 12 surgical) with class III malocclusion were analyzed. All had a pretreatment ANB angle greater than -5 masculine. Using discriminant analysis, only Holdaway angle was selected to differentiate patients in the pretreatment stage. Seventy-two per cent patients were correctly classified. In the orthodontic group, reverse overjet was corrected by retraction of the lower incisors and downward and backward rotation of the mandible. The surgical group was corrected by setback of the lower anterior dentoalveolus and uprighting of the lower incisors. No difference was found in posttreatment soft tissue measurements between the two groups. Twelve degree for the Holdaway angle can be a guideline in determining the treatment modalities for borderline class III patients, but the preferences of operators and patients are also important. (2) Both therapeutic options should highlight changes in the lower dentoalveolus and lower incisors. (3) Both treatment modalities can achieve satisfactory improvements to the people.

  10. Management of skeletal Class III malocclusion with reverse pull headgear in a growing individual

    OpenAIRE

    Ambreen Afzal; Hasnain Sakrani; Norisha Ehsan Mahmood; Kamellia Mehershahi; Fatima Burney

    2016-01-01

    Skeletal Class III malocclusion is considered to be one of the most difficult orthodontic problems to treat. This malocclusion is associated with the retrognathic maxilla or prognathic mandible or sometimes a combination of both. The treatment of such cases requires an integrated approach and a comprehensive treatment plan including growth modification, dental camouflage, or orthognathic surgery. In a growing patient, orthopedic correction of skeletal Class III malocclusion with the help of a...

  11. Non-extraction treatment of a Class III skeletal case.

    Science.gov (United States)

    Gonzalez, Bulmario

    2009-01-01

    Adult Class III Skeletal treatment options have generally included some form of surgery (Maxillary advancement in midface deficient cases and/or Mandibular set-back). This article discusses non-surgical treatment of an adult patient using the combined concepts of mandibular molar distalization enhanced with TADs and non-extraction camouflage dental correction through maxillary incisor protraction and mandibular incisor lingualization.

  12. Camouflage treatment of skeletal class III malocclusion with asymmetry using a bone-borne rapid maxillary expander.

    Science.gov (United States)

    Seo, Yu-Jin; Chung, Kyu-Rhim; Kim, Seong-Hun; Nelson, Gerald

    2015-03-01

    This case report presents the successful use of palatal mini-implants for rapid maxillary expansion and mandibular distalization in a skeletal Class III malocclusion. The patient was a 13-year-old girl with the chief complaint of facial asymmetry and a protruded chin. Camouflage orthodontic treatment was chosen, acknowledging the possibility of need for orthognathic surgery after completion of her growth. A bone-borne rapid expander (BBRME) was used to correct the transverse discrepancy and was then used as indirect anchorage for distalization of the lower dentition with Class III elastics. As a result, a Class I occlusion with favorable inclination of the upper teeth was achieved without any adverse effects. The total treatment period was 25 months. Therefore, BBRME can be considered an alternative treatment in skeletal Class III malocclusion.

  13. Orthodontic camouflage of skeletal Class III malocclusion with miniplate: a case report.

    Science.gov (United States)

    Farret, Marcel Marchiori; Farret, Milton M Benitez; Farret, Alessandro Marchiori

    2016-01-01

    Skeletal Class III malocclusion is often referred for orthodontic treatment combined with orthognathic surgery. However, with the aid of miniplates, some moderate discrepancies become feasible to be treated without surgery. To report the case of a 24-year-old man with severe skeletal Angle Class III malocclusion with anterior crossbite and a consequent concave facial profile. The patient refused to undergo orthognathic surgery; therefore, orthodontic camouflage treatment with the aid of miniplates placed on the mandibular arch was proposed. After 18 months of treatment, a Class I molar and canine relationship was achieved, while anterior crossbite was corrected by retraction of mandibular teeth. The consequent decrease in lower lip fullness and increased exposure of maxillary incisors at smiling resulted in a remarkable improvement of patient's facial profile, in addition to an esthetically pleasing smile, respectively. One year later, follow-up revealed good stability of results.

  14. Evaluation of cervical posture of children in skeletal class I, II, and III.

    Science.gov (United States)

    D'Attilio, Michele; Caputi, Sergio; Epifania, Ettore; Festa, Felice; Tecco, Simona

    2005-07-01

    Previous studies on the relationship between morphological structure of the face and cervical posture have predominantly focused on vertical dimensions of the face. The aim of this study was to investigate whether there are significant differences in cervical posture in subjects with a different sagittal morphology of the face, i.e., a different skeletal class. One hundred twenty (120) children (60 males and 60 females, average age 9.5 yrs., SD+/-0.5) were admitted for orthodontic treatment. Selection criteria was: European ethnic origin, date of birth, considerable skeletal growth potential remaining and an absence of temporomandibular joint dysfunction (TMD). Lateral skull radiographs were taken in mirror position. Subjects were divided into three groups based on their skeletal class. The cephalometric tracings included postural variables. The most interesting findings were: 1. children in skeletal class III showed a significantly lower cervical lordosis angle (phead upon the spinal column compared to children in skeletal class I and skeletal class III (pposture of the neck seems to be strongly associated with the sagittal as well as the vertical structure of the face.

  15. [Size of lower jaw as an early indicator of skeletal class III development].

    Science.gov (United States)

    Stojanović, Zdenka; Nikodijević, Angelina; Udovicić, Bozidar; Milić, Jasmina; Nikolić, Predrag

    2008-08-01

    Malocclusion of skeletal class III is a complex abnormality, with a characteristic sagital position of the lower jaw in front of the upper one. A higher level of prognatism of the lower jaw in relation to the upper one can be the consequence of its excessive length. The aim of this study was to find the differences in the length of the lower jaw in the children with skeletal class III and the children with normal sagital interjaw relation (skeletal class I) in the period of mixed dentition. After clinical and x-ray diagnostics, profile tele-x-rays of the head were analyzed in 60 examinees with mixed dentition, aged from 6 to 12 years. The examinees were divided into two groups: group 1--the children with skeletal class III and group 2--the children with skeletal class I. The length of the lower jaw, upper jaw and cranial base were measured. The proportional relations between the lengths measured within each group were established and the level of difference in the lengths measured and their proportions between the groups were estimated. No significant difference between the groups was found in the body length, ramus and the total length of the lower jaw. Proportional relation between the body length and the length of the lower jaw ramus and proportional relation between the forward cranial base and the lower jaw body were not significantly different. A significant difference was found in proportional relations of the total length of the lower jaw with the total lengths of cranial base and the upper jaw and proportional relation of the length of the lower and upper jaw body. Of all the analyzed parameters, the following were selected as the early indicators of the development of skeletal class III on the lower jaw: greater total length of the lower jaw, proportional to the total lengths of cranial base and theupper jaw, as well as greater length of the lower jaw body, proportional to the length of the upper jaw body.

  16. Class III malocclusion with severe anteroposterior discrepancy

    Directory of Open Access Journals (Sweden)

    Susana Maria Deon Rizzatto

    2012-10-01

    Full Text Available This study aims at reporting the clinical case of a patient with Class III skeletal malocclusion with severe maxillary deficiency, producing a reduced midface associated with severe mandibular prognathism. The pre-surgical orthodontic preparation was composed mainly by dentoalveolar expansion and repositioning of the incisors in the lower arch. Then, a combined maxillary and mandibular orthognathic surgery was performed. The treatment objectives were achieved, with significant improvement in facial esthetics and occlusion, followed by post-treatment stability. This case was presented to the Brazilian Board of Orthodontics and Facial Orthopedics (BBO, as part of the requirements for obtaining the title of Diplomate by BBO.O objetivo deste artigo é relatar o caso clínico de um paciente portador de má oclusão de Classe III esquelética com acentuada deficiência maxilar, causando redução do terço médio da face, associada a severo prognatismo mandibular. O preparo ortodôntico pré-cirúrgico foi composto, principalmente, pela expansão dentoalveolar da maxila e o reposicionamento dos incisivos na arcada inferior. Depois, foi realizada a cirurgia ortognática combinada maxilomandibular. Os objetivos do tratamento foram atingidos, com significativa melhora da oclusão e da estética facial, seguida de estabilidade pós-tratamento. Esse caso foi apresentado à Diretoria do Board Brasileiro de Ortodontia e Ortopedia Facial (BBO, como parte dos requisitos para obtenção do título de Diplomado pelo BBO.

  17. Early orthopedic correction of skeletal Class III malocclusion using combined reverse twin block and face mask therapy

    Directory of Open Access Journals (Sweden)

    Vinay Kumar Chugh

    2015-01-01

    Full Text Available A 6-year 8-month-old girl presented with a moderate Class III malocclusion characterized by mid-face deficiency and an anterior cross bite. In the first phase, the patient was treated with combination of reverse twin block and facemask therapy. In phase two, fixed appliances were placed in the permanent dentition. The post treatment results were good and a favorable growth tendency could be observed. The correction of the Class III malocclusion occurred by a combination of skeletal and dental improvements. This report shows successful correction of skeletal Class III malocclusion in the early transitional dentition using combination therapy.

  18. Treatment of skeletal Class III malocclusions: orthognathic surgery or orthodontic camouflage? How to decide.

    Science.gov (United States)

    Benyahia, Hicham; Azaroual, Mohamed Faouzi; Garcia, Claude; Hamou, Edith; Abouqal, Redouane; Zaoui, Fatima

    2011-06-01

    The choice of treatment in adult skeletal Class III occlusions often poses a particularly tricky problem for the orthodontist. Faced with the option of either orthodontic camouflage or orthognathic surgery, the clinician's clinical experience is of paramount importance, especially in borderline cases. The aim of our study was to uncover a guide model enabling the practitioner to distinguish between skeletal Class III cases which can be suitably treated with orthodontics and those requiring orthognathic surgery. The lateral headfilms of 47 adult patients exhibiting skeletal Class III occlusions were analyzed. The orthodontic group comprised 22 patients and the surgical group 25. Twenty-seven linear, proportional and angular measurements were scrutinized. Stepwise discriminant analysis was used to identify the dentoskeletal and esthetic variables which most distinguished the two groups. The Holdaway angle was chosen to differentiate between patients prior to treatment. This model enables us to classify 87.2% of patients correctly. Copyright © 2011 CEO. Published by Elsevier Masson SAS. All rights reserved.

  19. Orthodontic camouflage of skeletal Class III malocclusion with miniplate: a case report

    Directory of Open Access Journals (Sweden)

    Marcel Marchiori Farret

    Full Text Available ABSTRACT Introduction: Skeletal Class III malocclusion is often referred for orthodontic treatment combined with orthognathic surgery. However, with the aid of miniplates, some moderate discrepancies become feasible to be treated without surgery. Objective: To report the case of a 24-year-old man with severe skeletal Angle Class III malocclusion with anterior crossbite and a consequent concave facial profile. Methods: The patient refused to undergo orthognathic surgery; therefore, orthodontic camouflage treatment with the aid of miniplates placed on the mandibular arch was proposed. Results: After 18 months of treatment, a Class I molar and canine relationship was achieved, while anterior crossbite was corrected by retraction of mandibular teeth. The consequent decrease in lower lip fullness and increased exposure of maxillary incisors at smiling resulted in a remarkable improvement of patient's facial profile, in addition to an esthetically pleasing smile, respectively. One year later, follow-up revealed good stability of results.

  20. Early orthodontic treatment for Class III malocclusion: A systematic review and meta-analysis.

    Science.gov (United States)

    Woon, See Choong; Thiruvenkatachari, Badri

    2017-01-01

    Class III malocclusion affects between 5% and 15% of our population. The 2 most common dilemmas surrounding Class III treatment are the timing of treatment and the type of appliance. A number of appliances have been used to correct a Class III skeletal discrepancy, but there is little evidence available on their effectiveness in the long term. Similarly, early treatment of Class III malocclusion has been practiced with increasing interest. However, there has been no solid evidence on the benefits in the long term. The aim of this systematic review was to evaluate the effectiveness of orthodontic/orthopedic methods used in the early treatment of Class III malocclusion in the short and long terms. Several sources were used to identify all relevant studies independently of language. The Cochrane Central Register of Controlled Trials, Cochrane Database of Systematic Reviews, Embase (Ovid), and MEDLINE (Ovid) were searched to June 2016. The selection criteria included randomized controlled trials (RCTs) and prospective controlled clinical trials (CCTs) of children between the ages of 7 and 12 years on early treatment with any type of orthodontic/orthopedic appliance compared with another appliance to correct Class III malocclusion or with an untreated control group. The primary outcome measure was correction of reverse overjet, and the secondary outcomes included skeletal changes, soft tissue changes, quality of life, patient compliance, adverse effect, Peer Assessment Rating score, and treatment time. The search results were screened for inclusion, and the data extracted by 2 independent authors. The data were analyzed using software (version 5.1, Review Manager; The Nordic Cochrane Centre, The Cochrane Collaboration; Copenhagen, Denmark). The mean differences with 95% confidence intervals were expressed for the continuous data. Random effects were carried out with high levels of clinical or statistical heterogeneity and fixed affects when the heterogeneity was low

  1. Two-Step Extraction of the Lower First Molar for Class III Treatment in Adult Patient.

    Science.gov (United States)

    Almeida, Kélei Cristina de Mathias; Paulin, Ricardo Fabris; Raveli, Taísa Barnabé; Raveli, Dirceu Barnabé; Santos-Pinto, Ary

    2016-01-01

    The aim of this article is to describe a case report of Class III malocclusion treatment with lower first molar extraction. The 27-year-old Caucasian male patient presented a symmetric face with a straight profile, hyperdivergent growth pattern, molar and cuspid Class III relation, and an anterior crossbite as well as a mild crowding on cuspids area, in both upper and lower arches and a tendency to posterior crossbite. The treatment was performed by the use of Haas expansion appliance followed by an initial alignment and leveling of the upper and lower arches with a fixed edgewise appliance, extraction of lower teeth aiming the correction of the incisors proclination and end the treatment with a Class I molar relationship. It resulted in a significant change in the patient's profile, dentoalveolar Class III correction, upper arch expansion, leveling and alignment of the upper and lower arches, and improvement of tipping of the upper and lowers incisors. In cases of a dentoalveolar compensation in well positioned bone bases the treatment with fixed appliances is an alternative and extraction of lower teeth is considered.

  2. Self-esteem in adolescents with Angle Class I, II and III malocclusion in a Peruvian sample.

    Science.gov (United States)

    Florián-Vargas, Karla; Honores, Marcos J Carruitero; Bernabé, Eduardo; Flores-Mir, Carlos

    2016-01-01

    To compare self-esteem scores in 12 to 16-year-old adolescents with different Angle malocclusion types in a Peruvian sample. A cross-sectional study was conducted in a sample of 276 adolescents (159, 52 and 65 with Angle Class I, II and III malocclusions, respectively) from Trujillo, Peru. Participants were asked to complete the Rosenberg Self-Esteem Scale (RSES) and were also clinically examined, so as to have Angle malocclusion classification determined. Analysis of covariance (ANCOVA) was used to compare RSES scores among adolescents with Class I, II and III malocclusions, with participants' demographic factors being controlled. Mean RSES scores for adolescents with Class I, II and III malocclusions were 20.47 ± 3.96, 21.96 ± 3.27 and 21.26 ± 4.81, respectively. The ANCOVA test showed that adolescents with Class II malocclusion had a significantly higher RSES score than those with Class I malocclusion, but there were no differences between other malocclusion groups. Supplemental analysis suggested that only those with Class II, Division 2 malocclusion might have greater self-esteem when compared to adolescents with Class I malocclusion. This study shows that, in general, self-esteem did not vary according to adolescents' malocclusion in the sample studied. Surprisingly, only adolescents with Class II malocclusion, particularly Class II, Division 2, reported better self-esteem than those with Class I malocclusion. A more detailed analysis assessing the impact of anterior occlusal features should be conducted.

  3. Evaluation of temporomandibular disorders in Class III patients treated with mandibular cervical headgear and fixed appliances.

    Science.gov (United States)

    Rey, Diego; Oberti, Giovanni; Baccetti, Tiziano

    2008-03-01

    Our aim in this study was to evaluate the prevalence of temporomandibular disorders (TMD) in Class III patients treated with mandibular cervical headgear (MCH) and fixed appliances. The sample of 75 patients included 25 patients with no previous orthodontic treatment, 25 Class I patients who had undergone orthodontic treatment with fixed appliances and without extractions, and 25 patients with dentoskeletal Class III disharmonies treated with MCH and fixed appliances. The Helkimo index was used to test the prevalence of TMD symptoms in the 3 groups. The prevalence rates of the Helkimo index in the 3 groups were compared with the z score on proportions. No statistically significant differences in the prevalence rates of the Helkimo index scores in the 3 groups were found (P = .367). Most subjects in the 3 groups had an Helkimo index of zero (66.7%). Subjects with Class III malocclusions treated with MCH and fixed appliances do not have greater prevalence of TMD symptoms than do Class I subjects treated with fixed appliances or untreated subjects.

  4. Orthodontic clockwise rotation of maxillomandibular complex for improving facial profile in late teenagers with Class III malocclusion: A preliminary report

    OpenAIRE

    Eric JW Liou; Yu-Chi Wang

    2018-01-01

    Objective: Orthodontic camouflage treatments improve occlusion but might worsen facial profile in patients with Class III malocclusion. It has been reported that surgical clockwise rotation of maxillomandibular complex (MMc) improves facial profile by reducing chin prominence and chin throat length in patients with Class III malocclusion. The purpose of this report was to illustrate two orthodontic techniques for clockwise rotation of the MMc in late teenagers with Class III malocclusion and ...

  5. Dentofacial effects of skeletal anchored treatment modalities for the correction of maxillary retrognathia.

    Science.gov (United States)

    Sar, Cağla; Sahinoğlu, Zahire; Özçirpici, Ayça Arman; Uçkan, Sina

    2014-01-01

    The aim of this clinical study was to investigate the skeletal, dentoalveolar, and soft-tissue effects of 2 skeletal anchorage rationales for Class III treatment compared with an untreated Class III control group. Fifty-one subjects who were in the prepubertal or pubertal growth period were included in the study. In group 1 (n = 17), facemasks were applied from miniplates placed in the lateral nasal walls of the maxilla, and intermaxillary Class III elastics were applied from symphyseal miniplates to a bonded appliance on the maxilla in group 2 (n = 17). These skeletal anchored groups were compared with an untreated control group (n = 17). Lateral cephalometric radiographs were obtained at the beginning and the end of the observation periods in all groups and analyzed according to the structural superimposition method. Differences between the groups were assessed with the Wilcoxon signed rank test or the paired-samples t test. The treatment periods were 7.4 and 7.6 months in groups 1 and 2, respectively, and the untreated control group was observed for 7.5 months. The maxilla moved forward by 3.11 mm in group 1 and by 3.82 mm in group 2. The counterclockwise rotation of the maxilla was significantly less in group 1 compared with group 2 (P <0.01). The mandible showed clockwise rotation and was positioned downward and backward in the treatment groups, and it was significantly greater in group 2 compared with group 1 (P <0.01). Changes in the maxillary incisor measurements were negligible in group 1 compared with group 2. A significant amount of mandibular incisor retroclination was seen in group 1, and a significant proclination was seen in group 2. The maxillomandibular relationships and the soft-tissue profiles were improved remarkably in both treatment groups. The protocols of miniplates with facemasks and miniplates with Class III elastics offer valid alternatives to conventional methods in severe skeletal Class III patients. However, the 2 maxillary

  6. Vertical control in the Class III compensatory treatment.

    Science.gov (United States)

    Sobral, Márcio Costa; Habib, Fernando A L; Nascimento, Ana Carla de Souza

    2013-01-01

    Compensatory orthodontic treatment, or simply orthodontic camouflage, consists in an important alternative to orthognathic surgery in the resolution of skeletal discrepancies in adult patients. It is important to point that, to be successfully performed, diagnosis must be detailed, to evaluate, specifically, dental and facial features, as well as the limitations imposed by the magnitude of the discrepancy. The main complaint, patient's treatment expectation, periodontal limits, facial pattern and vertical control are some of the items to be explored in the determination of the viability of a compensatory treatment. Hyperdivergent patients who present with a Class III skeletal discrepancy, associated with a vertical facial pattern, with the presence or tendency to anterior open bite, deserve special attention. In these cases, an efficient strategy of vertical control must be planned and executed. The present article aims at illustrating the evolution of efficient alternatives of vertical control in hiperdivergent patients, from the use, in the recent past, of extraoral appliances on the lower dental arch (J-hook), until nowadays, with the advent of skeletal anchorage. But for patients with a more balanced facial pattern, the conventional mechanics with Class III intermaxillary elastics, associated to an accentuated curve of Spee in the upper arch and a reverse curve of Spee in the lower arch, and vertical elastics in the anterior region, continues to be an excellent alternative, if there is extreme collaboration in using the elastics.

  7. Vertical control in the Class III compensatory treatment

    Directory of Open Access Journals (Sweden)

    Márcio Costa Sobral

    2013-04-01

    Full Text Available INTRODUCTION: Compensatory orthodontic treatment, or simply orthodontic camouflage, consists in an important alternative to orthognathic surgery in the resolution of skeletal discrepancies in adult patients. It is important to point that, to be successfully performed, diagnosis must be detailed, to evaluate, specifically, dental and facial features, as well as the limitations imposed by the magnitude of the discrepancy. The main complaint, patient's treatment expectation, periodontal limits, facial pattern and vertical control are some of the items to be explored in the determination of the viability of a compensatory treatment. Hyperdivergent patients who carry a Class III skeletal discrepancy, associated with a vertical facial pattern, with the presence or tendency to anterior open bite, deserve special attention. In these cases, an efficient strategy of vertical control must be planned and executed. OBJECTIVE: The present article aims at illustrating the evolution of efficient alternatives of vertical control in hiperdivergent patients, from the use, in the recent past, of extra-oral appliances on the lower dental arch (J-hook, until nowadays, with the advent of skeletal anchorage. But for patients with a more balanced facial pattern, the conventional mechanics with Class III intermaxillary elastics, associated to an accentuated curve of Spee in the upper arch and a reverse Curve of Spee in the lower arch, and vertical elastics in the anterior region, continues to be an excellent alternative, if there is extreme collaboration in using the elastics.

  8. Self-esteem in adolescents with Angle Class I, II and III malocclusion in a Peruvian sample

    Directory of Open Access Journals (Sweden)

    Karla Florián-Vargas

    2016-04-01

    Full Text Available ABSTRACT Objective: To compare self-esteem scores in 12 to 16-year-old adolescents with different Angle malocclusion types in a Peruvian sample. Material and Methods: A cross-sectional study was conducted in a sample of 276 adolescents (159, 52 and 65 with Angle Class I, II and III malocclusions, respectively from Trujillo, Peru. Participants were asked to complete the Rosenberg Self-Esteem Scale (RSES and were also clinically examined, so as to have Angle malocclusion classification determined. Analysis of covariance (ANCOVA was used to compare RSES scores among adolescents with Class I, II and III malocclusions, with participants' demographic factors being controlled. Results: Mean RSES scores for adolescents with Class I, II and III malocclusions were 20.47 ± 3.96, 21.96 ± 3.27 and 21.26 ± 4.81, respectively. The ANCOVA test showed that adolescents with Class II malocclusion had a significantly higher RSES score than those with Class I malocclusion, but there were no differences between other malocclusion groups. Supplemental analysis suggested that only those with Class II, Division 2 malocclusion might have greater self-esteem when compared to adolescents with Class I malocclusion. Conclusion: This study shows that, in general, self-esteem did not vary according to adolescents' malocclusion in the sample studied. Surprisingly, only adolescents with Class II malocclusion, particularly Class II, Division 2, reported better self-esteem than those with Class I malocclusion. A more detailed analysis assessing the impact of anterior occlusal features should be conducted.

  9. DEPENDENCE OF MORPHOMETRIC PARAMETERS OF THE DENTAL OCCLUSION ON THE TYPE OF THE LOWER JAW GROWTH IN CHILDREN WITH CLASS II1 DENTOFACIAL ANOMALIES WHO LINE IN THE NORTHERN UKRAINE.

    Science.gov (United States)

    Galich, L V; Kuroedova, V; Lakhtin, Yu; Galich, L B; Moskalenko, P

    2017-03-01

    The aim of the work was to study the structure of dentofacial anomalies in children and adolescents in Sumy city and Sumy oblast, to identify dentoalveolar morphological peculiarities of the occlusion in 10-13 years old patients with class ІІ1 anomalies according to Angle's classification with different types of lower jaw bone growth. A retrospective analysis of 2236 outpatient dental cards of urban and rural patients with orthodontic pathology was conducted. Patients were divided into three age groups: 6-9 years old (early mixed occlusion) - 592 children; 10-13 years old (late mixed occlusion) - 1180 children; over 13 years old (permanent occlusion) - 464 persons; besides 76 patients with class ІІ1 anomalies according to Angle's classification aged 10-13 years were examined. To determine the type of lower jaw growth, the children underwent orthopantomographic examination, diagnostic models were made and biometric indicators were calculated to determine the severity of the morphological changes. It was established that anomalies of individual teeth and dental curve dominated in all age groups (71.24%). Among the occlusion anomalies, a large part falls to class ІІ anomalies according to Angle's classification (19.18%). A third of these patients have a neutral type of lower jaw growth (36.84±5.53%), horizontal and vertical types of growth reach 18.42±4.47% and 19.74±4.56%, respectively. The combination of neutral and vertical type of growth of the lower jaw occurs in 1.7 times more than the combination of neutral and horizontal. The most pronounced morphological changes were observed in the group of patients with a horizontal type of lower jaw growth. When planning treatment and prophylactic measures among patients of the orthodontic profile, it is necessary to take into account the peculiarities of both the prevalence of pathology in the region and the morphological changes of different severity in the dental curves of the jaws.

  10. Orthodontic camouflage in the case of a skeletal class III malocclusion.

    Science.gov (United States)

    Costa Pinho, Teresa M; Ustrell Torrent, Josep M; Correia Pinto, João G R

    2004-01-01

    To describe the clinical problem of a male patient, 15 years of age, who had a dolichofacial biotype and a Class III skeletal type at the beginning of treatment, manifesting itself at the dental level. To resolve the dental problems, orthodontic camouflage (dentoalveolar compensation) with the extraction of two mandibular premolars was performed. This procedure allowed a more harmonious occlusal relationship at the canine level and provided better occlusal stability of the final result. The procedure choice was based on the fact that some cephalometric values were favorable to attenuation of the skeletal Class III. For example, according to the analyses of Björk and Jarabak, these values are the total sum of 1, 2, 3 (sella angle, articular angle, and gonial angles) and the anterior/posterior facial height (S-Go/Na-Me). However, the same cephalometric data indicate a possible worsening of the existing open bite, which might be corrected with dental extractions and the use of intermaxillary elastics.

  11. Management of skeletal Class III malocclusion with face mask therapy and comprehensive orthodontic treatment.

    Science.gov (United States)

    Muthukumar, Kirthika; Vijaykumar, N M; Sainath, M C

    2016-01-01

    Orthopedic correction of skeletal Class III malocclusion in a growing patient is crucial as it can circumvent future surgical procedures. Further, as surgery is done only at a later stage, early treatment helps to avoid the detrimental effects produced by the facial disfigurement on the patient's social life. This case report describes the treatment of a child aged 9 years 6 months who had a skeletal Class III malocclusion. The treatment plan involved the use of a reverse pull headgear (facemask) and multibracket appliance therapy resulting in successful correction of the malocclusion. The treatment results were highly satisfactory resulting in improved facial esthetics, a skeletal Class I with a Dental Class I molar and canine relationship, an ideal overjet and overbite. Thus, dentoalveolar camouflage, if done in properly selected cases, alleviates the need for surgical intervention. The patient is being monitored until the end of growth to ensure the stability of treatment results.

  12. Management of skeletal Class III malocclusion with face mask therapy and comprehensive orthodontic treatment

    Directory of Open Access Journals (Sweden)

    Kirthika Muthukumar

    2016-01-01

    Full Text Available Orthopedic correction of skeletal Class III malocclusion in a growing patient is crucial as it can circumvent future surgical procedures. Further, as surgery is done only at a later stage, early treatment helps to avoid the detrimental effects produced by the facial disfigurement on the patient's social life. This case report describes the treatment of a child aged 9 years 6 months who had a skeletal Class III malocclusion. The treatment plan involved the use of a reverse pull headgear (facemask and multibracket appliance therapy resulting in successful correction of the malocclusion. The treatment results were highly satisfactory resulting in improved facial esthetics, a skeletal Class I with a Dental Class I molar and canine relationship, an ideal overjet and overbite. Thus, dentoalveolar camouflage, if done in properly selected cases, alleviates the need for surgical intervention. The patient is being monitored until the end of growth to ensure the stability of treatment results.

  13. Augmented corticotomy-assisted surgical orthodontics decompensates lower incisors in Class III malocclusion patients.

    Science.gov (United States)

    Wang, Bo; Shen, Guofang; Fang, Bing; Yu, Hongbo; Wu, Yong; Sun, Liangyan

    2014-03-01

    To quantitatively evaluate lower incisor decompensation and the surrounding periodontal region after augmented corticotomy-assisted surgical orthodontics in patients with Class III malocclusion. This prospective study enrolled patients with severe Class III malocclusion who underwent augmented corticotomy in the lower anterior region before orthodontic surgery. Cone-beam computed tomograms and lateral cephalograms were obtained before treatment (T0), after presurgical orthodontic treatment (T1), and at removal of the orthodontic surgical appliances (T2). Repeated measures analysis of variance was used to compare variables at each time point: root length (RL), anterior vertical alveolar bone level at the labial side (AVBL), posterior vertical alveolar bone level at the lingual side (PVBL), labial alveolar bone thickness at the apex (LA), lingual alveolar bone thickness at the apex (LP), and angle of the incisor to the mandibular plane (L1-MP). In the 8 subjects studied, RL was maintained from T0 to T2 (P > .05), whereas AVBL and PVBL increased from T0 to T1 (P .05). LP decreased from T0 to T1 (P lower anterior region in patients with Class III malocclusion. Copyright © 2014 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

  14. [Orthodontic treatment of malocclusion Class III in patients aged 6-12 by Postnikov appliance, face mask and bracket system].

    Science.gov (United States)

    Postnikov, M A; Trunin, D A; Pankratova, N V; Nesterov, A M; Sadykov, M I; Ostankov, S A

    2018-01-01

    The diagnostics and treatment of malocclusion Class III in patients aged 6-12 is an vital problem in orthodontics. Method of orthodontic treatment of malocclusion Class III in patients with the help of improved and patented orthodontic construction - 'Postnikov appliance' - and face mask and bracket system is analysed in the article. Orthodontic treatment of malocclusion Class III was examined in 24 patients aged 6-12 by the suggested method. All patients were examined clinically and with the help af additional diagnostic methods: head cephalometry in lateral position with further data analysis in Dolphin Imaging (USA). The use of computer technologies in Dolphin Imaging helps to controll the process of correction of dentition correlation in different stages of treatment, to reduce the period of treatment of malocclusion Class III in patients aged 6-12 and to improve face esthetics and life quality ratio.

  15. Skeletal stability of surgery-first bimaxillary orthognathic surgery for skeletal class III malocclusion, using standardized criteria.

    Science.gov (United States)

    Park, K-H; Sandor, G K; Kim, Y-D

    2016-01-01

    The purpose of this study was to compare the postoperative stability following bimaxillary surgery performed either with or without preoperative orthodontic treatment, in class III malocclusion patients. These patients were enrolled using standardized inclusion criteria. Forty patients with a class III malocclusion were included in this retrospective study. Inclusion criteria were class III malocclusion with and without premolar extraction, stability. With respect to postsurgical changes, significant differences were observed in the changes for the vertical reference plane to the posterior nasal spine, horizontal reference plane to B-point, and occlusal plane angle in both groups. No statistically significant differences in the relapse rates were observed between the two groups. No significant differences were observed between the two groups in terms of the postoperative stability. Copyright © 2015 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  16. A benefit-risk assessment of class III antiarrhythmic agents

    DEFF Research Database (Denmark)

    Elming, Hanne; Brendorp, Bente; Pehrson, Steen

    2004-01-01

    The prevalence of arrhythmia in the population is increasing as more people survive for longer with cardiovascular disease. It was once thought that antiarrhythmic therapy could save life, however, it is now evident that antiarrhythmic therapy should be administrated with the purpose of symptomat......, and reducing the need for implantable cardioverter defibrillator shock/antitachycardia therapy, since no class III antiarrhythmic agents have proven survival benefit. The risks discussed mainly focus on pro-arrhythmia as torsade de pointes ventricular tachycardia....

  17. Long-term stability of an adult Class III open-bite malocclusion treated with multiloop edgewise archwire

    Directory of Open Access Journals (Sweden)

    Chien-Chun Kuo

    2009-09-01

    Full Text Available This case report describes the treatment of a 17-year-old girl with an anterior open- bite and Class III malocclusion, who had a history of thumb-sucking habit in childhood. The multiloop edgewise archwire technique was used on the mandibular arch to facilitate uprighting of the mandibular posterior teeth, change the cant of occlusal plane, close the anterior open-bite, and correct the Class III malocclusion. At the end of treatment, Class I occlusion and correction of the anterior open-bite had been achieved. An examination 8 years 8 months after treatment revealed long-term stability of the treatment results.

  18. Dentofacial development in long-term survivors of acute lymphoblastic leukemia. A comparison of three treatment modalities

    International Nuclear Information System (INIS)

    Sonis, A.L.; Tarbell, N.; Valachovic, R.W.; Gelber, R.; Schwenn, M.; Sallan, S.

    1990-01-01

    Ninety-seven children who were diagnosed with acute lymphoblastic leukemia before 10 years of age and treated with chemotherapy alone, chemotherapy plus 1800-cGy cranial irradiation (RT), or chemotherapy plus 2400-cGy RT were evaluated for effects of therapy on dentofacial development. All patients were seen at least 5 years postdiagnosis. Dental abnormalities were determined from panoramic radiographs, and craniofacial evaluations were made from lateral cephalometric radiographs. Ninety-one (94%) of all patients and 41 (100%) of patients younger than 5 years of age at diagnosis had abnormal dental development. The severity of these abnormalities was greater in children who received treatment before 5 years of age and in those who received RT. Observed dental abnormalities included tooth agenesis, arrested root development, microdontia, and enamel dysplasias. Craniofacial abnormalities occurred in 18 of 20 (90%) of those patients who received chemotherapy plus 2400-cGy RT before 5 years of age. Mean cephalometric values of this group showed significant deficient mandibular development. The results of this study suggest that the severity of dentofacial-developmental abnormalities secondary to antileukemia therapy are related to the age of the patient at the initiation of treatment and the use of cranial RT

  19. Soft tissue thin-plate spline analysis of pre-pubertal Korean and European-Americans with untreated Angle's Class III malocclusions.

    Science.gov (United States)

    Singh, G D; McNamara, J A; Lozanoff, S

    1999-01-01

    The purpose of this study was to assess soft tissue facial matrices in subjects of diverse ethnic origins with underlying dentoskeletal malocclusions. Pre-treatment lateral cephalographs of 71 Korean and 70 European-American children aged between 5 and 11 years with Angle's Class III malocclusions were traced, and 12 homologous, soft tissue landmarks digitized. Comparing mean Korean and European-American Class III soft tissue profiles, Procrustes analysis established statistical difference (P thin-plate spline analysis indicated that both affine and non-affine transformations contribute towards the total spline (deformation) of the averaged Class III soft tissue configurations. For non-affine transformations, partial warp (PW) 8 had the highest magnitude, indicating large-scale deformations visualized as labio-mental protrusion, predominantly. In addition, PW9, PW4, and PW5 also had high magnitudes, demonstrating labio-mental vertical compression and antero-posterior compression of the lower labio-mental soft tissues. Thus, Korean children with Class III malocclusions demonstrate antero-posterior and vertical deformations of the labio-mental soft tissue complex with respect to their European-American counterparts. Morphological heterogeneity of the soft tissue integument in subjects of diverse ethnic origin may obscure the underlying skeletal morphology, but the soft tissue integument appears to have minimal ontogenetic association with Class III malocclusions.

  20. Escherichia coli class Ib ribonucleotide reductase contains a dimanganese(III)-tyrosyl radical cofactor in vivo†

    Science.gov (United States)

    Cotruvo, Joseph A.; Stubbe, JoAnne

    2011-01-01

    Escherichia coli class Ib ribonucleotide reductase (RNR) converts nucleoside 5′-diphosphates to deoxynucleoside 5′-diphosphates in iron-limited and oxidative stress conditions. We have recently demonstrated in vitro that this RNR is active with both diferric-tyrosyl radical (FeIII2-Y•) and dimanganese(III)-Y• (MnIII2-Y•) cofactors in the β2 subunit, NrdF [Cotruvo J.A., Jr. and Stubbe J., Biochemistry (2010) 49, 1297–1309]. Here we demonstrate, by purification of this protein from its endogenous levels in an E. coli strain deficient in its five known iron uptake pathways and grown under iron-limited conditions, that the MnIII2-Y• cofactor is assembled in vivo. This is the first definitive determination of the active cofactor of a class Ib RNR purified from its native organism without overexpression. From 88 g of cell paste, 150 μg of NrdF was isolated with ~95% purity, with 0.2 Y•/β2, 0.9 Mn/β2, and a specific activity of 720 nmol/min/mg. In these conditions, the class Ib RNR is the primary active RNR in the cell. Our results strongly suggest that E. coli NrdF is an obligate manganese protein in vivo and that the MnIII2-Y• cofactor assembly pathway we have identified in vitro involving the flavodoxin-like protein NrdI, present inside the cell at catalytic levels, is operative in vivo. PMID:21250660

  1. A new modified tandem appliance for management of developing Class III malocclusion

    Directory of Open Access Journals (Sweden)

    Ram Sukh

    2013-01-01

    Full Text Available Most developing Class III patients display a retruded maxilla. Early intervention in mixed dentition is associated with better patient compliance and possibly a better orthopedic response, which can produce favorable results. The aim of this article is to present the fabrication of the new modified tandem appliance and its use in management of developing Class III malocclusion. The therapeutic results of a new modified tandem appliance are presented in an 8 year-old male patient with anterior cross bite and retrognathic maxilla at the mixed dentition stage. Anterior cross bite was corrected in 3 months and the positive overjet of 4 mm after continued use of the appliance for 1 year. There was a significant improvement in profile of the patient. The use of this appliance in this type of malocclusion enabled the correction of malocclusion in a few months and encouraging favorable skeletal growth in the future.

  2. A new modified tandem appliance for management of developing Class III malocclusion.

    Science.gov (United States)

    Sukh, Ram; Singh, Gyan P; Tandon, Pradeep

    2013-10-01

    Most developing Class III patients display a retruded maxilla. Early intervention in mixed dentition is associated with better patient compliance and possibly a better orthopedic response, which can produce favorable results. The aim of this article is to present the fabrication of the new modified tandem appliance and its use in management of developing Class III malocclusion. The therapeutic results of a new modified tandem appliance are presented in an 8 year-old male patient with anterior cross bite and retrognathic maxilla at the mixed dentition stage. Anterior cross bite was corrected in 3 months and the positive overjet of 4 mm after continued use of the appliance for 1 year. There was a significant improvement in profile of the patient. The use of this appliance in this type of malocclusion enabled the correction of malocclusion in a few months and encouraging favorable skeletal growth in the future.

  3. Skeletal Class III and anterior open bite treatment with different retention protocols: a report of three cases.

    Science.gov (United States)

    Farret, Milton Meri Benitez; Farret, Marcel Marchiori; Farret, Alessandro Marchiori

    2012-09-01

    The treatment of skeletal class III and anterior open bite can be unstable and orthodontists frequently observe relapse. Here, we report on the management of three patients with skeletal class III profiles and open bites treated by orthodontic camouflage. Each received a retention protocol involving the use of two separate appliances during the night and day accompanied by myofunctional therapy. Long-term follow-up revealed a stable outcome.

  4. Determination of midsagittal plane for evaluation of facial asymmetry using three-dimensional computed tomography

    International Nuclear Information System (INIS)

    Kim, Tae Young; Huh, Kyung Hoe; Choi, Soon Chul; Baik, Jee Seon; Park, Joo Young; Chae, Hwa Sung

    2011-01-01

    The aim of the present study was to investigate the disagreement of cephalometric analysis depending on the reference determination of midsagittal plane on three-dimensional computed tomography. A total of 102 young women with class III dentofacial deformity were evaluated using three-dimensional computed tomography. The cranial and facial midsagittal planes were defined and the amounts of jaw deviation were calculated. The amounts of jaw deviation were compared with paired t-test (2-tailed) and Bland-Altman plot was drawn. The landmark tracing were reproducible (r≥.978). The jaws relative to the cranial midsagittal plane were 10-17 times more significantly deviated than to the facial midsagittal plane (P<.001). Bland-Altman plot demonstrated that the differences between the amounts of jaw deviation from two midsagittal planes were not normally distributed versus the average of the amounts of jaw deviation from two midsagittal planes. The cephalometric analyses of facial asymmetry were significantly inconsistent depending on the reference determination of midsagittal plane. The reference for midsagittal plane should be carefully determined in three-dimensional cephalometric analysis of facial asymmetry of patients with class III dentofacial deformity.

  5. Evaluation depth of the curve of Spee in class I, class II, and class III malocclusion: A cross sectional study

    Directory of Open Access Journals (Sweden)

    Sanjna Nayar

    2015-01-01

    Full Text Available Occlusal plane is an essential consideration when multiple long-span posterior restorations are designed. When restorations are added to an existing tooth arrangement characterized by rotated, tipped, or extruded teeth, excursive interferences may be incorporated, resulting in detrimental squeal. The curve of Spee, which exists in the ideal natural dentition, allows harmony to exist between the anterior tooth and condylar guidance. This curve exists in the sagittal plane and is the best viewed from a lateral aspect. It permits total posterior disclusion on mandibular protrusion, given proper anterior tooth guidance. It is unclear that whether the curve of Spee is a description of the occlusal surface of each arch separately or in maximal intercuspation. The purpose of this study was to examine the differences in the depth of curve of Spee between the class I, class II, class III and to investigate the relationship of depth of curve of Spee with over jet, over-bite.

  6. Skeletal Class III malocclusion with thin symphyseal bone: a case report.

    Science.gov (United States)

    Hikida, Eriko; Tanikawa, Chihiro

    2012-11-01

    To describe the management of a severe skeletal Class III patient with thin symphyseal bone and alveolar bone covering the mandibular incisors. A 24 year-old female presented with a skeletal Class III malocclusion characterised by thin alveolar bone in a mildly crowded, mandibular incisor region. Computerised tomography (CT) assisted in the determination of possible tooth movement within the anterior mandibular alveolar bone. The finalised treatment plan aimed to align the maxillary and mandibular dental arches following the extraction of the maxillary right first premolar and the mandibular right permanent lateral incisor. The surgical repositioning of the maxilla and mandible with a LeFort I osteotomy and a bilateral sagittal split osteotomy (BSSO) would follow. After treatment, an acceptable facial profile and a solid intercuspation of the teeth were obtained. Significant root resorption was not observed. The occlusion remained stable with normal overjet and overbite after two years of retention. CT examination provided an assessment of the three-dimensional morphological characteristics of anterior alveolar bone which enabled an evaluation of possible tooth movement.

  7. Proteomics computational analyses suggest that the bornavirus glycoprotein is a class III viral fusion protein (γ penetrene

    Directory of Open Access Journals (Sweden)

    Garry Robert F

    2009-09-01

    Full Text Available Abstract Background Borna disease virus (BDV is the type member of the Bornaviridae, a family of viruses that induce often fatal neurological diseases in horses, sheep and other animals, and have been proposed to have roles in certain psychiatric diseases of humans. The BDV glycoprotein (G is an extensively glycosylated protein that migrates with an apparent molecular mass of 84,000 to 94,000 kilodaltons (kDa. BDV G is post-translationally cleaved by the cellular subtilisin-like protease furin into two subunits, a 41 kDa amino terminal protein GP1 and a 43 kDa carboxyl terminal protein GP2. Results Class III viral fusion proteins (VFP encoded by members of the Rhabdoviridae, Herpesviridae and Baculoviridae have an internal fusion domain comprised of beta sheets, other beta sheet domains, an extended alpha helical domain, a membrane proximal stem domain and a carboxyl terminal anchor. Proteomics computational analyses suggest that the structural/functional motifs that characterize class III VFP are located collinearly in BDV G. Structural models were established for BDV G based on the post-fusion structure of a prototypic class III VFP, vesicular stomatitis virus glycoprotein (VSV G. Conclusion These results suggest that G encoded by members of the Bornavirdae are class III VFPs (gamma-penetrenes.

  8. Evaluation of Patients’ Satisfaction after Class III Orthognathic Surgery

    Science.gov (United States)

    Magro-Filho, Osvaldo; Oliveira, Derly Tescaro Narcizo; Martins, Lidia Pimenta; Salazar, Marcio; Medeiros, Rodrigo Antonio De; Santos, Daniela Micheline Dos

    2015-01-01

    Background Well-planned orthognathic surgery improves psychological health, aesthetics and function of patients. Aim The present study aimed to investigate patients’ satisfaction after orthognathic surgery by means of a satisfaction questionnaire before and after surgery. Materials and Methods A total of 29 patients was selected (17 women and 12 men), with a mean age of 28 years, randomly selected from a private clinic at Araçatuba – São Paulo by two investigators. Anamnesis and clinical examination were performed. Subjects with facial deformities submitted to orthodontic treatment before and after orthognathic surgery with a minimum post-surgery period of 6 months, answered a satisfaction questionnaire composed of 10 questions regarding dental and facial aesthetics. In this study, the maximum satisfaction score was 10. Results Regarding aesthetics, two satisfaction parameters were investigated: dental and facial. For all indices, the average satisfaction was up to score 7. Conclusion According to the results, it can be concluded that orthognathic surgery has been an effective treatment for dentofacial deformities, aesthetics and functional problems, what was verified by pre and postoperative questionnaire application. PMID:26557610

  9. Evaluation of Patients' Satisfaction after Class III Orthognathic Surgery.

    Science.gov (United States)

    Magro-Filho, Osvaldo; Goiato, Marcelo Coelho; Oliveira, Derly Tescaro Narcizo; Martins, Lidia Pimenta; Salazar, Marcio; Medeiros, Rodrigo Antonio De; Santos, Daniela Micheline Dos

    2015-10-01

    Well-planned orthognathic surgery improves psychological health, aesthetics and function of patients. The present study aimed to investigate patients' satisfaction after orthognathic surgery by means of a satisfaction questionnaire before and after surgery. A total of 29 patients was selected (17 women and 12 men), with a mean age of 28 years, randomly selected from a private clinic at Araçatuba - São Paulo by two investigators. Anamnesis and clinical examination were performed. Subjects with facial deformities submitted to orthodontic treatment before and after orthognathic surgery with a minimum post-surgery period of 6 months, answered a satisfaction questionnaire composed of 10 questions regarding dental and facial aesthetics. In this study, the maximum satisfaction score was 10. Regarding aesthetics, two satisfaction parameters were investigated: dental and facial. For all indices, the average satisfaction was up to score 7. According to the results, it can be concluded that orthognathic surgery has been an effective treatment for dentofacial deformities, aesthetics and functional problems, what was verified by pre and postoperative questionnaire application.

  10. Management of skeletal Class III malocclusion with reverse pull headgear in a growing individual

    Directory of Open Access Journals (Sweden)

    Ambreen Afzal

    2016-01-01

    Full Text Available Skeletal Class III malocclusion is considered to be one of the most difficult orthodontic problems to treat. This malocclusion is associated with the retrognathic maxilla or prognathic mandible or sometimes a combination of both. The treatment of such cases requires an integrated approach and a comprehensive treatment plan including growth modification, dental camouflage, or orthognathic surgery. In a growing patient, orthopedic correction of skeletal Class III malocclusion with the help of a reverse pull headgear is crucial as it can reduce the chances of further surgical treatment to correct the skeletal discrepancy. This case report describes the management of skeletal Class III malocclusion in a 12-year-old female child with a retrognathic maxilla. The patient did not have any other genetic abnormality or significant known comorbidity. The treatment plan involved fixed orthodontic appliance therapy in combination with a reverse pull headgear for an orthopedic effect. This treatment was continued for 3 years, and well-aligned dental arches with a positive over jet were achieved at the conclusion of treatment. Using facemask therapy in conjunction with fixed orthodontic appliances has been a successful treatment option in growing children. Treatment should be carried out as early as possible to correct the skeletal discrepancy nonsurgically and achieve better results.

  11. Miniscrew-assisted mandibular molar distalization in a patient with skeletal class-III malocclusion: A clinical case report

    Directory of Open Access Journals (Sweden)

    Seyed Mohammadreza Safavi

    2013-01-01

    Full Text Available In nongrowing patients with mild skeletal Class-III malocclusion, premolar extraction or molar distalization in the lower arch can be done as a part of camouflage treatment. Temporary anchorage devices are widely used for this purpose because they do not produce undesirable reciprocal effects and do not depend on the patient′s cooperation. However, most reported cases in this regard have used interradicular miniscrews in the mandibular arch and these have a risk of failure as they can loosen due to collision with adjacent roots. This article showcases mandibular molar distalization utilizing miniscrews, inserted at the retromolar area to correct a Class-III problem. A 24-year-old girl with a mild skeletal Class-III malocclusion and dental Class-III molar and canine relationship bilaterally was referred for orthodontic treatment. The treatment plan included distalization of the lower molars bilaterally followed by full fixed appliance therapy, after third molar extractions. For the lower molar distalization, the miniscrews were inserted at the retromolar pad. At the end of 21 months, a Class-I molar and canine relationship, normal overjet and overbite were obtained. The average amount of distalization of mandibular first molar was 3.2 mm at the crown level. In conclusion, placing miniscrews at the retromolar pad area for lower molar distalization was found to be a simple and effective method for correcting anterior cross bite and mandibular anterior crowding or protrusion, without the need for patient compliance.

  12. TGF-β-stimulated aberrant expression of class III β-tubulin via the ERK signaling pathway in cultured retinal pigment epithelial cells

    International Nuclear Information System (INIS)

    Chung, Eun Jee; Chun, Ji Na; Jung, Sun-Ah; Cho, Jin Won; Lee, Joon H.

    2011-01-01

    Highlights: ► TGF-β induces aberrant expression of βIII in RPE cells via the ERK pathway. ► TGF-β increases O-GlcNAc modification of βIII in RPE cells. ► Mature RPE cells have the capacity to express a neuron-associated gene by TGF-β. -- Abstract: The class III β-tubulin isotype (β III ) is expressed exclusively by neurons within the normal human retina and is not present in normal retinal pigment epithelial (RPE) cells in situ or in the early phase of primary cultures. However, aberrant expression of class III β-tubulin has been observed in passaged RPE cells and RPE cells with dedifferentiated morphology in pathologic epiretinal membranes from idiopathic macular pucker, proliferative vitreoretinopathy (PVR) and proliferative diabetic retinopathy (PDR). Transforming growth factor-β (TGF-β) has been implicated in dedifferentiation of RPE cells and has a critical role in the development of proliferative vitreoretinal diseases. Here, we investigated the potential effects of TGF-β on the aberrant expression of class III β-tubulin and the intracellular signaling pathway mediating these changes. TGF-β-induced aberrant expression and O-linked-β-N-acetylglucosamine (O-GlcNac) modification of class III β-tubulin in cultured RPE cells as determined using Western blotting, RT-PCR and immunocytochemistry. TGF-β also stimulated phosphorylation of ERK. TGF-β-induced aberrant expression of class III β-tubulin was significantly reduced by pretreatment with U0126, an inhibitor of ERK phosphorylation. Our findings indicate that TGF-β stimulated aberrant expression of class III β-tubulin via activation of the ERK signaling pathway. These data demonstrate that mature RPE cells have the capacity to express a neuron-associated gene in response to TGF-β stimulation and provide useful information towards understanding the pathogenesis of proliferative vitreoretinal diseases.

  13. TGF-{beta}-stimulated aberrant expression of class III {beta}-tubulin via the ERK signaling pathway in cultured retinal pigment epithelial cells

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Eun Jee [Department of Ophthalmology, National Health Insurance Corporation Ilsan Hospital, Gyeonggi-do (Korea, Republic of); Chun, Ji Na; Jung, Sun-Ah [Konyang University Myunggok Medical Research Institute, Kim' s Eye Hospital, Konyang University College of Medicine, Seoul (Korea, Republic of); Cho, Jin Won [Department of Biology, Yonsei University, 134 Shinchon-dong, Seodaemun-gu, Seoul 120-749 (Korea, Republic of); Lee, Joon H., E-mail: joonhlee@konyang.ac.kr [Konyang University Myunggok Medical Research Institute, Kim' s Eye Hospital, Konyang University College of Medicine, Seoul (Korea, Republic of)

    2011-11-18

    Highlights: Black-Right-Pointing-Pointer TGF-{beta} induces aberrant expression of {beta}III in RPE cells via the ERK pathway. Black-Right-Pointing-Pointer TGF-{beta} increases O-GlcNAc modification of {beta}III in RPE cells. Black-Right-Pointing-Pointer Mature RPE cells have the capacity to express a neuron-associated gene by TGF-{beta}. -- Abstract: The class III {beta}-tubulin isotype ({beta}{sub III}) is expressed exclusively by neurons within the normal human retina and is not present in normal retinal pigment epithelial (RPE) cells in situ or in the early phase of primary cultures. However, aberrant expression of class III {beta}-tubulin has been observed in passaged RPE cells and RPE cells with dedifferentiated morphology in pathologic epiretinal membranes from idiopathic macular pucker, proliferative vitreoretinopathy (PVR) and proliferative diabetic retinopathy (PDR). Transforming growth factor-{beta} (TGF-{beta}) has been implicated in dedifferentiation of RPE cells and has a critical role in the development of proliferative vitreoretinal diseases. Here, we investigated the potential effects of TGF-{beta} on the aberrant expression of class III {beta}-tubulin and the intracellular signaling pathway mediating these changes. TGF-{beta}-induced aberrant expression and O-linked-{beta}-N-acetylglucosamine (O-GlcNac) modification of class III {beta}-tubulin in cultured RPE cells as determined using Western blotting, RT-PCR and immunocytochemistry. TGF-{beta} also stimulated phosphorylation of ERK. TGF-{beta}-induced aberrant expression of class III {beta}-tubulin was significantly reduced by pretreatment with U0126, an inhibitor of ERK phosphorylation. Our findings indicate that TGF-{beta} stimulated aberrant expression of class III {beta}-tubulin via activation of the ERK signaling pathway. These data demonstrate that mature RPE cells have the capacity to express a neuron-associated gene in response to TGF-{beta} stimulation and provide useful information

  14. Cephalometric analysis of hard and soft tissues in a 12-year-old syndromic child: A case report and update on dentofacial features of Crouzon syndrome

    Directory of Open Access Journals (Sweden)

    K Nagaraju

    2011-01-01

    Full Text Available Crouzon syndrome or craniofacial dysostosis is a rare syndrome characterized by craniosynostosis, midfacial hypoplasia and exophthalmia. The abnormalities found in this syndrome change too much from case to case depending on the suture fusion order. We report a case of a 12 year old child and a mother showing variations in the dentofacial tissues clinically and radiographically. Subsequently, the application of digital software [Dolphin Imaging 11] enabled us to solve out the case as Crouzon syndrome by analyzing the skeletal and soft tissue alterations. An update of the effects of this syndrome on various systems and dentofacial features with emphasis on tooth abnormalities is documented.

  15. [Positive inotropic and lusitropic effect of RP 62719, a new class III antiarrhythmia agent].

    Science.gov (United States)

    Beregi, J P; Escande, D; Coudray, N; Chemla, D; Mestre, M; Péry, N; Lecarpentier, Y

    1994-02-01

    Antiarrhythmic drugs, especially the Class I family, exert a negative inotropic effect on the myocardium which is particularly undesirable in patients with depressed left ventricular function. Therefore, research has been directed to the development of new, more specific molecules of the Class III family. The authors studies the mechanical effects of RP 62719 on guinea pig left ventricular papillary muscle. This new molecule is a pure Class III antiarrhythmic, known to lengthen the duration of the cardiac action potential by selectively blocking the potassium current iK1 (inward rectifier K+ current). The mechanical parameters were determined during the phases of contraction and relaxation under isotonic and isometric conditions. At 0.2 and 2 microM concentrations, RP 62719 improved cardiac contraction under both isotonic and isometric conditions with an increase of about 30% of Vmax (p delta 1 (p force normalized per cross-sectional area [AF/S (p actions could provide significant therapeutic advantages especially in patients cardiac failure.

  16. Combined Use of Facial Osteoplasty and Orthognathic Surgery for Treatment of Dentofacial Deformities.

    Science.gov (United States)

    Li, Yunfeng; Hu, Zhiai; Ye, Bin; Liu, Yao; Ren, Xiaochun; Zhu, Songsong

    2016-12-01

    Orthognathic surgery is an efficient procedure for cosmetic and functional aims. However, when functional improvement is achieved by mandibular or maxillary operations, additional esthetic corrections may be imperative for some patients. This study aims to introduce our primary practice of simultaneous facial bone contouring and orthognathic surgery for esthetic reasons. Ten patients with dentofacial deformities as well as a prominent angle, asymmetric deformities, or a high zygoma and zygomatic arch were recruited from West China Hospital of Stomatology, Sichuan University (Chengdu, China), between January 1, 2014, and July 31, 2015. Traditional orthognathic surgical procedures such as bilateral sagittal split osteotomy and Le Fort I osteotomy combined with facial osteoplasty including mandibular angle ostectomy, outer cortex ostectomy of the mandibular angle, and zygoma and zygomatic arch reduction were performed. Radiographs and medical photographs were taken before and after surgery to compare the effectiveness of the combined use of facial osteoplasty and orthognathic surgery. All patients had an uneventful postoperative recovery, with no signs of infection, jaw displacement, or osteonecrosis. Radiographs taken 1 week after surgery and pictures of the facial profile and occlusion taken 6 months after surgery showed satisfactory esthetic outcomes. All patients were satisfied with the functional and cosmetic results. This study indicated the clinical feasibility of simultaneous facial bone contouring and orthognathic surgery for the treatment of dentofacial deformities. Simultaneous facial bone contouring seems to be an alternative procedure in addition to conventional orthognathic surgery for cosmetic aims in certain patients. Copyright © 2016 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

  17. Maxillary Transverse Comparison of Skeletal Class I and Class III Patient Populations Using Cone Beam Computed Tomography

    Science.gov (United States)

    2012-04-13

    dental compensations 5. Have fully erupted canines (no...expansion. Compendium 1996;17:170-178. 2. Basaran G, Hamamci N, Hamamci O. Comparison of Dental Arch Widths in Different Types of Malocclusions . World... Dental and Alveolar Arch Widths in Normal Occlusion and Class III Malocclusion . Angle Orthod 2005; 75:809- 813.   36. Vanarsdall, Transverse dimension and long-term stability, Semin Orthod 1999;5:171–180.

  18. Treatment and post-treatment effects of facemask therapy on the sagittal pharyngeal dimensions in Class III subjects.

    Science.gov (United States)

    Baccetti, Tiziano; Franchi, Lorenzo; Mucedero, Manuela; Cozza, Paola

    2010-06-01

    The purpose of this cephalometric study was to analyse the treatment and post-treatment craniofacial effects of a facemask (FM) combined with a bite block (BB) with specific regard to the sagittal pharyngeal dimensions in subjects with a Class III malocclusion when compared with an untreated Class III control group. The FM/BB group (22 subjects, 12 females and 10 males) had a mean age pre-treatment (T1) of 8.9 +/- 1.5 years, at the end of active treatment (T2) of 10.5 +/- 1.3 years, and post-treatment (T3) of 12.6 +/- 1.9 years. The treated group was compared with a control group of 14 subjects (6 females and 8 males) with untreated Class III malocclusions that matched the FM/BB group as to age at T1, T2, and T3, observation periods and skeletal maturation. Comparisons of the T2-T1 and T3-T1 changes between the two groups were analysed with the Mann-Whitney test. Significant favourable skeletal changes in the maxilla and mandible were observed in the treated group both after Ts2 and T3. No significant short- or long-term changes in the sagittal oropharyngeal and nasopharyngeal airway dimensions were induced by maxillary protraction in subjects with a Class III malocclusion when compared with untreated controls.

  19. Identification and cloning of class II and III chitinases from alkaline floral nectar of Rhododendron irroratum, Ericaceae.

    Science.gov (United States)

    Zha, Hong-Guang; Milne, Richard I; Zhou, Hong-Xia; Chen, Xiang-Yang; Sun, Hang

    2016-10-01

    Class II and III chitinases belonging to different glycoside hydrolase families were major nectarins in Rhododendron irroratum floral nectar which showed significant chitinolytic activity. Previous studies have demonstrated antimicrobial activity in plant floral nectar, but the molecular basis for the mechanism is still poorly understood. Two chitinases, class II (Rhchi2) and III (Rhchi3), were characterized from alkaline Rhododendron irroratum nectar by both SDS-PAGE and mass spectrometry. Rhchi2 (27 kDa) and Rhchi3 (29 kDa) are glycoside hydrolases (family 19 and 18) with theoretical pI of 8.19 and 7.04. The expression patterns of Rhchi2 and Rhchi3 were analyzed by semi-quantitative RT-PCR. Rhchi2 is expressed in flowers (corolla nectar pouches) and leaves while Rhchi3 is expressed in flowers. Chitinase in concentrated protein and fresh nectar samples was visualised by SDS-PAGE and chitinolytic activity in fresh nectar was determined spectrophotometrically via chitin-azure. Full length gene sequences were cloned with Tail-PCR and RACE. The amino acid sequence deduced from the coding region for these proteins showed high identity with known chitinases and predicted to be located in extracellular space. Fresh R. irroratum floral nectar showed significant chitinolytic activity. Our results demonstrate that class III chitinase (GH 18 family) also exists in floral nectar. The functional relationship between class II and III chitinases and the role of these pathogenesis-related proteins in antimicrobial activity in nectar is suggested.

  20. Angle Class II malocclusion treated with extraction of permanent teeth

    Directory of Open Access Journals (Sweden)

    Gustavo Mattos Barreto

    2013-08-01

    Full Text Available Angle Class II malocclusion associated with anterior open bite in adult patients demands a carefully elaborated orthodontic planning, aiming at restoring not only harmonious dental and facial esthetics, but also a balanced masticatory function. Orthognathic surgery or permanent teeth extraction are often the choice of treatment, therefore, treatment decision is related to all dental, skeletal and functional aspects. The present report discusses orthodontic compensation carried out by means of upper premolar extraction performed to correct the Class II canine relationship and, consequently, the anterior open bite, accepting that the upper incisors be retroclined. This clinical case was presented to the Brazilian Board of Orthodontics and Dentofacial Orthopedics (BBO as part of the requirements for obtaining the BBO Certification.

  1. Compensatory orthodontic treatment of skeletal Class III malocclusion with anterior crossbite

    OpenAIRE

    José Valladares Neto

    2014-01-01

    INTRODUCTION: This case report describes the orthodontic treatment of an adult patient with skeletal Class III malocclusion and anterior crossbite. A short cranial base led to difficulties in establishing a cephalometric diagnosis. The patient's main complaint comprised esthetics of his smile and difficulties in mastication. METHODS: The patient did not have the maxillary first premolars and refused orthognathic surgery. Therefore, the treatment chosen was orthodontic camouflage and extr...

  2. Kinematic analysis of mandibular motion before and after orthognathic surgery for skeletal Class III malocclusion: A pilot study.

    Science.gov (United States)

    Ugolini, Alessandro; Mapelli, Andrea; Segù, Marzia; Galante, Domenico; Sidequersky, Fernanda V; Sforza, Chiarella

    2017-03-01

    The aim of the study was to detect the changes in 3D mandibular motion after orthognathic surgery for skeletal Class III malocclusion. Using a 3D motion analyzer, free mandibular border movements were recorded in nine patients successfully treated for skeletal Class III malocclusion and in nine patients scheduled for orthognathic surgery. Data were compared using Mann-Whitney non-parametric U-test. The results showed no differences between the groups in the total amount of mouth opening, protrusion, and in lateral excursions, but the percentage of mandibular movement explained by condylar translation was significantly increased after surgery (20% vs. 23.6%). During opening, the post-surgery patients showed a more symmetrical mandibular interincisal point and condylar path than pre-surgery patients (p < 0.01). Patients treated with orthognathic surgery for skeletal Class III malocclusion recover a good and symmetric temporomandibular joint function.

  3. Thin-plate spline analysis of mandibular morphological changes induced by early class III treatment: a long-term evaluation.

    Science.gov (United States)

    Franchi, Lorenzo; Pavoni, Chiara; Cerroni, Silvia; Cozza, Paola

    2014-08-01

    To evaluate the long-term mandibular morphological changes induced by early treatment of class III malocclusion with rapid maxillary expansion (RME) and facial mask (FM). Twenty-five subjects [10 boys, 15 girls; mean age at T1 (start of treatment) 9.3±1.6 years] with class III disharmony were treated with RME and FM therapy followed by fixed appliances. The patients were re-evaluated at the end of growth (T2), about 8.5 years after the end of the treatment (mean age, 18.6±2.0 years). Sixteen subjects with untreated class III malocclusion comprised the control group. Mandibular shape changes were analysed on the lateral cephalograms of the subjects of both groups by means of thin-plate spline (TPS) analysis. Procrustes average mandibular configurations were subjected to TPS analysis by means of both cross-sectional between-group comparisons at T1 and at T2 and longitudinal within-group comparisons. Statistical analysis of shape differences was performed using a generalized Goodall F test. In the long term, the treated group exhibited a significant upward and forward direction of condylar growth. On the contrary, untreated class III subjects showed an upward and backward direction of condylar growth associated with a downward and forward deformation of the mandibular symphysis. Limitations are related to the small sample size of both treated and control groups and to the retrospective nature of the study. Early treatment of class III malocclusion with RME and FM is able to produce significant and favourable long-term mandibular shape changes characterized by an anterior morphogenetic rotation. © The Author 2013. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

  4. A pilot clinical study of Class III surgical patients facilitated by improved accelerated osteogenic orthodontic treatments.

    Science.gov (United States)

    Wu, JiaQi; Jiang, Jiu-Hui; Xu, Li; Liang, Cheng; Bai, YunYang; Zou, Wei

    2015-07-01

    To evaluate if the improved accelerated osteogenic orthodontics (IAOO) procedure could speed Class III surgical patients' preoperative orthodontic treatment duration and, if yes, to what extent. This study was also designed to determine whether or not an IAOO procedure affects the tooth-moving pattern during extraction space closure. The samples in this study consisted of 24 Class III surgical patients. Twelve skeletal Class III surgery patients served as an experimental group (group 1) and the others as a control group (group 2). Before treatment, the maxillary first premolars were removed. For group 1, after the maxillary dental arch was aligned and leveled (T2), IAOO procedures were performed in the maxillary alveolar bone. Except for this IAOO procedure in group 1, all 24 patients experienced similar combined orthodontic and orthognathic treatment. Study casts of the maxillary dentitions were made before orthodontic treatment (T1) and after extraction space closure (T3). All of the casts were laser scanned, and the amount of movement of the maxillary central incisor, canine, and first molar, as well as arch widths, were digitally measured and analyzed by using the three-dimensional model superimposition method. The time durations T3-T2 were significantly reduced in group 1 by 8.65 ± 2.67 months and for T3-T1 were reduced by 6.39 ± 2.00 months (P teeth movement in the sagittal, vertical, and transverse dimensions between the two groups (P > .05). The IAOO can reduce the surgical orthodontic treatment time for the skeletal Class III surgical patient by more than half a year on average. The IAOO procedures do not save anchorage.

  5. The Position of Hyoici Bone in Skeletal Class I, II and III Patients

    Directory of Open Access Journals (Sweden)

    Ravanmehr H

    2000-06-01

    Full Text Available In this investigation, the position of hyoid bone was compared in three skeletal groups of class I, II and III. The study was based on evaluating 77 lateral cephalometric radiographs, 40 girls and 37 boys, which were divided into 3 groups. Group 1, 2, and 3 consist of 26, 25, and 26 radiographs. 19 cephalometric landmarks and 10 planes were used in order to tracing the radiographs. In all patients, 9 skeletal and 4 cervical vertebrae parameters were measured to determine the hyoid bone. These parameters were compared between three skeletal groups regardless of sex and then, in another statistical analysis, parameters were compared based on patients sex. Statistical analysis showed that in class III patients, the hyoid bone was positioned more anteriorly than two other groups. Also in this group, the hyoid bone had less inclination and it was more horizontal in relation to mandibular plane. In skeletal class II patients this bone was positioned more superiorly than two other groups. Due to these findings it can be concluded that perimandibular muscles and bones could affect the growth of mandible. In addition, comparison of the parameters between two sexes revealed that the hyoid bone was positioned more anteriorly and inferiorly in boys. Also it was shown that in the girls, the position of hyoid bone was closer to the position of this bone in skeletal class I patients.

  6. Risk of cesarean delivery among pregnant women with class III obesity.

    Science.gov (United States)

    Borghesi, Yves; Labreuche, Julien; Duhamel, Alain; Pigeyre, Marie; Deruelle, Philippe

    2017-02-01

    To identify factors associated with cesarean delivery among women with class III obesity attempting vaginal delivery. In a retrospective study, medical charts were reviewed for women aged 18 years or older with a singleton pregnancy of at least 37 weeks and a body mass index (calculated as weight in kilograms divided by the square of height in meters) of 40 or higher who were eligible to attempt vaginal delivery at a maternity hospital in Lille, France, between 1999 and 2012. Among 345 eligible women, 301 (87.2%) attempted vaginal delivery; 211 (70.1%) were successful and 90 (29.9%) delivered by cesarean. The frequency of nulliparity was higher among those undergoing cesarean after a trial of labor (64 [71.1%]) than among those who delivered vaginally (57 [27.0%]; Pcesarean (61 [67.8%] vs 96 [45.5%]; Pcesarean among women attempting vaginal delivery (odds ratio [OR] 2.30, 95% confidence interval [CI] 1.25-4.22), whereas history of vaginal delivery was protective (OR 0.08, 95% CI 0.04-0.17). Nulliparous women with class III obesity attempting a vaginal delivery should be warned of the high risk of cesarean delivery, especially if they require induction. © 2016 International Federation of Gynecology and Obstetrics.

  7. Intravenous Vancomycin Associated With the Development of Nephrotoxicity in Patients With Class III Obesity.

    Science.gov (United States)

    Choi, Yookyung Christy; Saw, Stephen; Soliman, Daniel; Bingham, Angela L; Pontiggia, Laura; Hunter, Krystal; Chuang, Linda; Siemianowski, Laura A; Ereshefsky, Benjamin; Hollands, James M

    2017-11-01

    A consensus statement recommends initial intravenous (IV) vancomycin dosing of 15-20 mg/kg every 8- 24 hours, with an optional 25- to 30-mg/kg loading dose. Although some studies have shown an association between weight and the development of vancomycin-associated nephrotoxicity, results have been inconsistent. To evaluate the correlation between incidence of nephrotoxicity associated with weight-based IV vancomycin dosing strategies in nonobese and obese patients. This retrospective cohort study evaluated hospitalized adult patients admitted who received IV vancomycin. Patients were stratified into nonobese (body mass index [BMI] obesity class I and II (BMI 30-39.9kg/m 2 ), and obesity class III (BMI≥40 kg/m 2 ) groups; patients who were overweight but not obese were excluded. Incidence of nephrotoxicity and serum vancomycin trough concentrations were evaluated. Of a total of 62 documented cases of nephrotoxicity (15.1%), 13 (8.7%), 23 (14.3%), and 26 (26.3%) cases were observed in nonobese, obesity class I and II, and obesity class III groups, respectively ( P=0.002). Longer durations of therapy ( P20 mg/L ( Pobesity were 3-times as likely to develop nephrotoxicity when compared with nonobese patients (odds ratio [OR]=2.99; CI=1.12-7.94) and obesity class I and II patients (OR=3.14; CI=1.27-7.75). Obesity and other factors are associated with a higher risk of vancomycin-associated nephrotoxicity.

  8. Retrospective 25-year follow-up of treatment outcomes in Angle Class III patients : Success versus failure.

    Science.gov (United States)

    Wendl, Brigitte; Kamenica, A; Droschl, H; Jakse, N; Weiland, F; Wendl, T; Wendl, M

    2017-03-01

    Despite recommendations for early treatment of hereditary Angle Class III syndrome, late pubertal growth may cause a relapse requiring surgical intervention. This study was performed to identify predictors of successful Class III treatment. Thirty-eight Class III patients treated with a chincup were retrospectively analyzed. Data were collected from the data archive, cephalograms, and casts, including pretreatment (T0) and posttreatment (T1) data, as well as long-term follow-up data collected approximately 25 years after treatment (T2). Each patient was assigned to a success or a failure group. Data were analyzed based on time (T0, T1, T2), deviations from normal (Class I), and prognathism types (true mandibular prognathism, maxillary retrognathism, combined pro- and retrognathism). Compared to Class I normal values, the data obtained in both groups yielded 11 significant parameters. The success group showed values closer to normal at all times (T0, T1, T2) and vertical parameters decreased from T0 to T2. The failure group showed higher values for vertical and horizontal mandibular growth, as well as dentally more protrusion of the lower anterior teeth and more negative overjet at all times. In adittion, total gonial and upper gonial angle were higher at T0 and T1. A prognostic score-yet to be evaluated in clinical practice-was developed from the results. The failure group showed greater amounts of horizontal development during the years between T1 and T2. Treatment of true mandibular prognathism achieved better outcomes in female patients. Cases of maxillary retrognathism were treated very successfully without gender difference. Failure was clearly more prevalent, again without gender difference, among the patients with combined mandibular prognathism and maxillary retrognathism. Crossbite situations were observed in 44% of cases at T0. Even though this finding had been resolved by T1, it relapsed in 16% of the cases by T2. The failure rate increased in cases of

  9. Assessment of the changes in quality of life of patients with class II and III deformities during and after orthodontic-surgical treatment.

    Science.gov (United States)

    Baherimoghaddam, T; Tabrizi, R; Naseri, N; Pouzesh, A; Oshagh, M; Torkan, S

    2016-04-01

    The aim of this longitudinal study was to assess and compare the oral health-related quality of life (OHRQoL) of patients with class II and III deformities during and after orthodontic-surgical treatment. Thirty class III and 28 class II patients were evaluated at baseline (T0), just prior to surgery (T1), at 6 months after surgery (T2), and at 12 months after debonding (T3). OHRQoL was assessed using the Oral Health Impact Profile (OHIP-14). Friedman two-way analysis of variance and the Wilcoxon signed-rank test were performed to compare the relative changes in OHRQoL during treatment. Significant changes in the overall OHIP-14 scores were observed during and after orthodontic-surgical treatment in both groups. During the pre-surgical stage, psychological discomfort and psychological disability decreased in class III patients, and class II patients experienced a significant deterioration in psychological discomfort during the same period. Six months after surgery, patients in both groups showed improvements in psychological discomfort, social disability, and handicap. Physical disability and functional limitation showed further improvement at 12 months after debonding in class II patients. This study reaffirms that orthodontic-surgical treatment has a significant effect on the OHRQoL of class III and class II patients. Copyright © 2015 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  10. The influence of INS VNTR class III allele on auxological parameters, glucose, insulin, lipids, and adipocytokines secretion in prepubertal children born small for gestational age.

    Science.gov (United States)

    Stawerska, Renata; Szałapska, Małgorzata; Borowiec, Maciej; Antosik, Karolina; Młynarski, Wojciech; Lewiński, Andrzej

    2016-01-01

    The insulin gene variable number of tandem repeats (INS VNTR) class III allele has been implicated in lower birth weight, obesity, and insulin resistance. We assessed its influence on birth weight in the Polish population and on the current body mass and metabolic profile in prepubertal children born small for gestational age (SGA). DNA for genotyping of INS VNTR was available for 123 subjects born SGA and 132 born appropriate for gestational age (AGA). We identified two alleles: class I and class III. Next, in 112 prepubertal (aged: 6.8 ± 1.38 years) SGA children, the auxological measurements, fasting serum C-peptide, triglycerides, cholesterol, ghrelin, leptin, adiponectin, resistin, cortisol, and insulin-like growth factor type I (IGF-I) concentrations, as well as glucose and insulin during oral glucose tolerance test (OGTT), were assessed and insulin resistance indices were calculated. The results were analysed depending on INS VNTR variants. The occurrence of individual INS VNTR variants were similar in the SGA and AGA groups. In prepubertal SGA children, we did not observe any statistical differences as regards birth weight, body mass, lipids, or adipocytokine concentrations among I/I, I/III, and III/III class groups. The concentration of insulin in 120' of OGTT was significantly higher in class III homozygous than in class I homozygous individuals. Variant INS VNTR class III was shown not to be associated in any essential way with birth weight in the Polish population. Among prepubertal SGA children, the presence of INS VNTR class III is related to higher insulin secretion during OGTT. (Endokrynol Pol 2016; 67 (6): 585-591).

  11. 40 CFR 147.2200 - State-administered program-Class I, III, IV, and V wells.

    Science.gov (United States)

    2010-07-01

    ... AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) STATE, TRIBAL, AND EPA-ADMINISTERED UNDERGROUND INJECTION... administered by the Railroad Commission of Texas. A program revision application for Class III brine mining..._regulations/ibr_locations.html. (1) Texas Statutory and Regulatory Requirements Applicable to the Underground...

  12. Radiographic cephalometry assessment of the linear and angular parameters on cranial base in children with skeletal class III

    Directory of Open Access Journals (Sweden)

    Stojanović Zdenka M.

    2007-01-01

    Full Text Available Background/Aim. In malocclusion of skeletal class III, mandible is located in front of maxilla in sagital plain, which is manifested by a lower value of the sagital inter-jaw angle than in skeletal class I, where the jaw sagital relation is normal. Apart from the deformities on mandible and/or maxilla, in skeletal class III deformities are also frequent on the cranial base. The aim of this research was to find the differences in the parameter values on the cranial base among the children with skeletal class III and the children with skeletal class I in the period of mixed dentition. Methods. After clinical examination and orthopan-tomography, profile radiography of the head was analyzed in 60 examinees, aged from 6−12 years. The examinees were divided into two groups: group 1 - the children with skeletal class III; group 2 - the children with skeletal class I. Both linear and angular parameters on the cranial base were measured, as well as the angles of maxillary and mandible prognatism and the angle of sagital inter-jaw relation. The level of difference in the parameter values between the groups was estimated and the degree of correlation of the main angle of the cranial base with the angles of sagital position of the jaws in each of the two groups was established. Results. A significant difference between the groups was found only in the average values of the angles of maxillary prognatism and sagital interjaw relation. In the group 1, the main angle of the cranial base was in a significant correlation with the angles of sagital positions of the jaws, while in the group 2, such significance was not found. Conclusion. There were no significant differences in the parameter values on the cranial base between the groups. There was a significant correlation of the main angle of the cranial base with the angles of sagital position of the jaws in the group 1 only. .

  13. Prognostic effect of symptomatic extracranial lesions on survival of recursive partitioning analysis Class III brain metastatic patients treated with stereotactic radiotherapy

    Directory of Open Access Journals (Sweden)

    Xiu-Jun Chen

    2016-01-01

    Conclusion: The presence of SELs was a negative prognosis factor for the survival of RPA Class III brain metastatic patients. If RPA Class III brain metastatic patients were without SELs, SRT may be a reasonable treatment option, but if they had SELs, SRT may not be a reasonable treatment due to the short overall survival time and KDT.

  14. Class III Malocclusion Surgical-Orthodontic Treatment

    Directory of Open Access Journals (Sweden)

    Bruna Alves Furquim

    2014-01-01

    Full Text Available The aim of the present case report is to describe the orthodontic-surgical treatment of a 17-year-and-9-month-old female patient with a Class III malocclusion, poor facial esthetics, and mandibular and chin protrusion. She had significant anteroposterior and transverse discrepancies, a concave profile, and strained lip closure. Intraorally, she had a negative overjet of 5 mm and an overbite of 5 mm. The treatment objectives were to correct the malocclusion, and facial esthetic and also return the correct function. The surgical procedures included a Le Fort I osteotomy for expansion, advancement, impaction, and rotation of the maxilla to correct the occlusal plane inclination. There was 2 mm of impaction of the anterior portion of the maxilla and 5 mm of extrusion in the posterior region. A bilateral sagittal split osteotomy was performed in order to allow counterclockwise rotation of the mandible and anterior projection of the chin, accompanying the maxillary occlusal plane. Rigid internal fixation was used without any intermaxillary fixation. It was concluded that these procedures were very effective in producing a pleasing facial esthetic result, showing stability 7 years posttreatment.

  15. Orthodontic decompensation in class III patients by means of distalization of upper molars.

    Science.gov (United States)

    Carlos, Villegas B; Giovanni, Oberti; Diego, Rey; Angela, Sierra; Baccetti, Tiziano

    2009-01-01

    Pre-surgical orthodontic treatments have the objective of establishing harmony between the dental arches by moving the teeth to ideal positions in relation to their bony bases, in order to achieve adequate antero-posterior occlusal and transverse relationships at the moment of surgery. Among the typical requirements in terms of dental compensations presented by Class III patients that require surgery, the inclination of anterior teeth must be changed in most cases by proclination of the lower incisors and retroclination of upper incisors. To achieve the inclination of the upper incisors, many different alternatives have been proposed, such as inter-proximal reduction, extractions, or distalization of upper molars, which has not been widely reported in the literature as a means to decompensate Class III malocclusion prior to surgery. This article describes the Bone Supported Pendulum (BSP) as an efficient therapeutic option to distalize molars through the use of an appliance stabilized to the palate by mini-implants, thus avoiding extractions and providing good interdigitation and coordination of the dental arches.

  16. Cardiac resynchronization induces major structural and functional reverse remodeling in patients with New York Heart Association class I/II heart failure

    DEFF Research Database (Denmark)

    St John Sutton, Martin; Ghio, Stefano; Plappert, Ted

    2009-01-01

    BACKGROUND: Cardiac resynchronization therapy (CRT) improves LV structure, function, and clinical outcomes in New York Heart Association class III/IV heart failure with prolonged QRS. It is not known whether patients with New York Heart Association class I/II systolic heart failure exhibit left...... ventricular (LV) reverse remodeling with CRT or whether reverse remodeling is modified by the cause of heart failure. METHODS AND RESULTS: Six hundred ten patients with New York Heart Association class I/II heart failure, QRS duration > or =120 ms, LV end-diastolic dimension > or =55 mm, and LV ejection...... reduction in LV end-diastolic and end-systolic volume indexes and a 3-fold greater increase in LV ejection fraction in patients with nonischemic causes of heart failure. CONCLUSIONS: CRT in patients with New York Heart Association I/II resulted in major structural and functional reverse remodeling at 1 year...

  17. Bullying among Jordanian schoolchildren, its effects on school performance, and the contribution of general physical and dentofacial features.

    Science.gov (United States)

    Al-Bitar, Zaid B; Al-Omari, Iyad K; Sonbol, Hawazen N; Al-Ahmad, Hazem T; Cunningham, Susan J

    2013-12-01

    The aims of this study were to investigate the experience of bullying in a representative sample of Jordanian schoolchildren in Amman, to look at its effect on school attendance and perception of academic performance, and to look at the contribution of general physical and dentofacial features to this phenomenon. This was a cross-sectional study in which a representative sample of sixth-grade students (11-12 years of age) from randomly selected schools was asked to complete questionnaires distributed in the classroom in the presence of the researchers. The final sample size was 920 children (470 girls, 450 boys). The prevalence of bullying was 47% (n = 433); significantly more boys reported being bullied than girls (P bullying reported playing truant from school and disliking school than those who were not bullied. Teeth were the number 1 feature targeted for bullying, followed by strength and weight. The 3 most commonly reported dentofacial features targeted by bullies were spacing between the teeth or missing teeth, shape or color of the teeth, and prominent maxillary anterior teeth. This study demonstrated a high prevalence of bullying in Jordanian schools, with many children experiencing bullying because of their dental or facial appearance. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

  18. Comparison of incisor inclination in patients with Class III malocclusion treated with orthognathic surgery or orthodontic camouflage.

    Science.gov (United States)

    Troy, Beth A; Shanker, Shiva; Fields, Henry W; Vig, Katherine; Johnston, William

    2009-02-01

    Reports comparing Class III patients treated by camouflage and those treated by orthognathic surgery are not numerous. The purpose of this study was to compare the dental and skeletal values of Class III patients treated with these methods against normative data and over the course of treatment. Thirty-three surgical and 39 camouflage Class III patients were selected from a graduate orthodontic clinic and regional private practices, and lateral cephalograms were digitized. Skeletal and dental values were obtained, and mean and efficacy evaluations referenced to ethnic norms were calculated. At pretreatment, the surgery patients had more severe skeletal discrepancies and more compensated incisors. During presurgical orthodontic treatment, most of the surgery group's mandibular incisors were significantly decompensated, although half of the maxillary incisors remained compensated. The surgical move improved 90% of these patients but to only 60% to 65% of the norm. The camouflage group was compensated at pretreatment, and they became more compensated in the end. After treatment, there were no differences between the incisor positions of the 2 groups. There was no statistical difference in incisor inclination and position between the Class III surgical and camouflage groups after treatment; there was a significant difference in the pretreatment and posttreatment incisor inclination and position compared with normative values for both the surgical and the camouflage groups; the maxillary and mandibular incisors were not adequately decompensated in the surgical group, but significant improvement in mandibular incisor position and axial inclination was achieved presurgically. The outcome of the surgical correction was limited by the inadequate presurgical orthodontic incisor decompensation, and orthodontic compensation of incisors occurred postsurgically to achieve an optimal occlusal result.

  19. Mandibular dimensions of subjects with asymmetric skeletal class III malocclusion and normal occlusion compared with cone-beam computed tomography.

    Science.gov (United States)

    Lee, HyoYeon; Bayome, Mohamed; Kim, Seong-Hun; Kim, Ki Beom; Behrents, Rolf G; Kook, Yoon-Ah

    2012-08-01

    The purpose of this study was to use cone-beam computed tomography to compare mandibular dimensions in subjects with asymmetric skeletal Class III malocclusion and those with normal occlusion. Cone-beam computed tomography scans of 38 subjects with normal occlusion and 28 patients with facial asymmetry were evaluated and digitized with Invivo software (Anatomage, San Jose, Calif). Three midsagittal and 13 right and left measurements were taken. The paired t test was used to compare the right and left sides in each group. The Mann-Whitney U test was used to compare the midsagittal variables and the differences between the 2 sides of the group with normal occlusion with those of asymmetry patients. The posterior part of the mandibular body showed significant differences between the deviated and nondeviated sides in asymmetric Class III patients. The difference of the asymmetry group was significantly greater than that of the normal occlusion group for the mediolateral ramal and the anteroposterior condylar inclinations (P = 0.007 and P = 0.019, respectively). The asymmetric skeletal Class III group showed significant differences in condylar height, ramus height, and posterior part of the mandibular body compared with the subjects with normal occlusion. These results might be useful for diagnosis and treatment planning of asymmetric Class III patients. Copyright © 2012 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

  20. Bone thickness of the infrazygomatic crest area in skeletal Class III growing patients: A computed tomographic study

    International Nuclear Information System (INIS)

    Lee, Hyub Soo; Choi, Hang Moon; Choi, Dong Soon; Jang, Insan; Cha, Bong Kuen

    2013-01-01

    This study was performed to investigate the bone thickness of the infrazygomatic crest area by computed tomography (CT) for placement of a miniplate as skeletal anchorage for maxillary protraction in skeletal Class III children. CT images of skeletal Class III children (7 boys, 9 girls, mean age: 11.4 years) were taken parallel to the Frankfurt horizontal plane. The bone thickness of the infrazygomatic crest area was measured at 35 locations on the right and left sides, perpendicular to the bone surface. The bone was thickest (5.0 mm) in the upper zygomatic bone and thinnest (1.1 mm) in the anterior wall of the maxillary sinus. Generally, there was a tendency for the bone to be thicker at the superior and lateral area of the zygomatic process of the maxilla. There was no clinically significant difference in bone thickness between the right and left sides; however, it was thicker in male than in female subjects. In the infrazygomatic crest area, the superior and lateral area of the zygomatic process of the maxilla had the most appropriate thickness for placement of a miniplate in growing skeletal Class III children with a retruded maxilla.

  1. Bone thickness of the infrazygomatic crest area in skeletal Class III growing patients: A computed tomographic study

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Hyub Soo; Choi, Hang Moon; Choi, Dong Soon; Jang, Insan; Cha, Bong Kuen [College of Dentistry and Research Institute of Oral Science, Gangneung-Wonju National University, Gangneung (Korea, Republic of)

    2013-12-15

    This study was performed to investigate the bone thickness of the infrazygomatic crest area by computed tomography (CT) for placement of a miniplate as skeletal anchorage for maxillary protraction in skeletal Class III children. CT images of skeletal Class III children (7 boys, 9 girls, mean age: 11.4 years) were taken parallel to the Frankfurt horizontal plane. The bone thickness of the infrazygomatic crest area was measured at 35 locations on the right and left sides, perpendicular to the bone surface. The bone was thickest (5.0 mm) in the upper zygomatic bone and thinnest (1.1 mm) in the anterior wall of the maxillary sinus. Generally, there was a tendency for the bone to be thicker at the superior and lateral area of the zygomatic process of the maxilla. There was no clinically significant difference in bone thickness between the right and left sides; however, it was thicker in male than in female subjects. In the infrazygomatic crest area, the superior and lateral area of the zygomatic process of the maxilla had the most appropriate thickness for placement of a miniplate in growing skeletal Class III children with a retruded maxilla.

  2. Biowaiver extension potential to BCS Class III high solubility-low permeability drugs: bridging evidence for metformin immediate-release tablet.

    Science.gov (United States)

    Cheng, Ching-Ling; Yu, Lawrence X; Lee, Hwei-Ling; Yang, Chyun-Yu; Lue, Chang-Sha; Chou, Chen-Hsi

    2004-07-01

    The biopharmaceutics classification system (BCS) allows biowaiver for rapid dissolving immediate-release (IR) products of Class I drugs (high solubility and high permeability). The possibility of extending biowaivers to Class III high solubility and low permeability drugs is currently under scrutiny. In vivo bioequivalence data of different formulations of Class III drugs would support such an extension. The objective of this work was to demonstrate the bioequivalence of two marketed IR tablet products of a Class III drug, metformin hydrochloride, that are rapidly dissolving and have similar in vitro dissolution profiles. The effect of race on the systemic exposure of metformin was also explored. A randomized, open-label, two-period crossover study was conducted in 12 healthy Chinese male volunteers. Each subject received a single-dose of 500 mg of each product after an overnight fasting. The plasma concentrations of metformin were followed for 24 h. No significant formulation effect was found for the bioequivalence metrics: areas under concentration-time curve (AUC0-t, AUC0-infinity) and maximal concentration (Cmax). The 90% confidence intervals for the ratio of means were found within the acceptance range of 80-125% for the log-transformed data. Based on these results, it was concluded that the two IR products are bioequivalent. The pharmacokinetic parameters of metformin in Chinese for both products were similar and were in good agreement with those reported for metformin IR tablets in other ethnic populations. This study serves as an example for supporting biowaiver for BCS Class III drugs.

  3. Surgical-orthodontic treatment of a skeletal class III malocclusion.

    Science.gov (United States)

    Katiyar, Radha; Singh, G K; Mehrotra, Divya; Singh, Alka

    2010-07-01

    For patients whose orthodontic problems are so severe that neither growth modification nor camouflage offers a solution, surgery to realign the jaws or reposition dentoalveolar segments is the only possible treatment option left. One indication for surgery obviously is a malocclusion too severe for orthodontics alone. It is possible now to be at least semiquantitative about the limits of orthodontic treatment, in the context of producing normal occlusion as the diagrams of the "envelope of discrepancy" indicate. In this case report we present orthognathic treatment plan of an adult female patient with skeletal class III malocclusion. Patient's malocclusion was decompensated by orthodontic treatment just before the surgery and then normal jaw relationship achieved by bilateral sagittal split osteotomy.

  4. Perceived changes by peer group of social impact associated with combined orthodontic-surgical correction of class III malocclusion.

    Science.gov (United States)

    Jesani, Aliza; DiBiase, Andrew T; Cobourne, Martyn T; Newton, Timothy

    2014-09-01

    Whereas the psychosocial benefits of orthognathic treatment for the individual patient are established, there is little data relating to social perceptions in relation to changes in facial appearance as a result of combined orthodontic and orthognathic treatment. This study aimed to investigate the social impact of combined orthodontic-orthognathic surgical correction for class III malocclusion in Caucasian subjects. This cross-sectional study compared perceptions of facial appearance prior to and after orthognathic correction of class III malocclusion. Eighty undergraduate students were shown photographs of four Caucasian subjects (2 male and 2 female) pre- and post-orthognathic class III correction. Observers were asked to rate these subjects in relation to four different outcomes: (i) social competence (SC); (ii) intellectual ability (IA); (iii) psychological adjustment (PA); (iv) attractiveness. A mixed-model analysis of variance (ANOVA) was calculated to determine the effect of each variable. Statistically significant differences were found in ratings of the same face before and after treatment. After treatment, faces were rated as more psychologically adjusted, more sociable, more likely to be successful and more attractive; with the mean psychological adjustment rating being associated with the most change (before treatment=8.06 [SD 2.30]; after treatment=6.64 [SD 2.03], t=2.04, pclass III malocclusion in Caucasians, individuals are rated by young adults as being better adjusted both psychologically and socially, more likely to be successful and more attractive. Copyright © 2014 Elsevier Ltd. All rights reserved.

  5. Correction of a Class III malocclusion with over 20 mm of space to close in the maxilla by using miniscrews for extra anchorage.

    NARCIS (Netherlands)

    Breuning, K.H.

    2008-01-01

    Unilateral closure of maxillary extraction spaces in patients with Class III malocclusion can be challenging. This case report describes the closure of first premolar and first molar extraction spaces in a patient with a Class III dental relationship. Two miniscrews were used for intraoral skeletal

  6. Ehrlichia secretes Etf-1 to induce autophagy and capture nutrients for its growth through RAB5 and class III phosphatidylinositol 3-kinase.

    Science.gov (United States)

    Lin, Mingqun; Liu, Hongyan; Xiong, Qingming; Niu, Hua; Cheng, Zhihui; Yamamoto, Akitsugu; Rikihisa, Yasuko

    2016-11-01

    Ehrlichia chaffeensis is an obligatory intracellular bacterium that causes a potentially fatal emerging zoonosis, human monocytic ehrlichiosis. E. chaffeensis has a limited capacity for biosynthesis and metabolism and thus depends mostly on host-synthesized nutrients for growth. Although the host cell cytoplasm is rich with these nutrients, as E. chaffeensis is confined within the early endosome-like membrane-bound compartment, only host nutrients that enter the compartment can be used by this bacterium. How this occurs is unknown. We found that ehrlichial replication depended on autophagy induction involving class III phosphatidylinositol 3-kinase (PtdIns3K) activity, BECN1 (Beclin 1), and ATG5 (autophagy-related 5). Ehrlichia acquired host cell preincorporated amino acids in a class III PtdIns3K-dependent manner and ehrlichial growth was enhanced by treatment with rapamycin, an autophagy inducer. Moreover, ATG5 and RAB5A/B/C were routed to ehrlichial inclusions. RAB5A/B/C siRNA knockdown, or overexpression of a RAB5-specific GTPase-activating protein or dominant-negative RAB5A inhibited ehrlichial infection, indicating the critical role of GTP-bound RAB5 during infection. Both native and ectopically expressed ehrlichial type IV secretion effector protein, Etf-1, bound RAB5 and the autophagy-initiating class III PtdIns3K complex, PIK3C3/VPS34, and BECN1, and homed to ehrlichial inclusions. Ectopically expressed Etf-1 activated class III PtdIns3K as in E. chaffeensis infection and induced autophagosome formation, cleared an aggregation-prone mutant huntingtin protein in a class III PtdIns3K-dependent manner, and enhanced ehrlichial proliferation. These data support the notion that E. chaffeensis secretes Etf-1 to induce autophagy to repurpose the host cytoplasm and capture nutrients for its growth through RAB5 and class III PtdIns3K, while avoiding autolysosomal killing.

  7. Class III malocclusion treated with distalization of the mandibular dentition with miniscrew anchorage: A 2-year follow-up.

    Science.gov (United States)

    Chen, Kun; Cao, Yang

    2015-12-01

    This case report describes the orthodontic camouflage treatment for a 16-year-old Chinese girl with a Class III malocclusion. The treatment included extractions of the mandibular second molars, fixed appliance therapy, and miniscrew-aided mandibular arch distalization. Pretreatment, posttreatment, and 2-year follow-up records are shown. The anterior negative overjet and the Class III molar and canine relationships were corrected. The patient's facial profile was greatly improved. The mandibular third molars erupted into the second molar spaces, with acceptable intercuspation with the maxillary dentition. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

  8. Bullying, its effects on attitude towards class attendance and the contribution of physical and dentofacial features among adolescents in Northern Nigeria.

    Science.gov (United States)

    Chikaodi, Oguchi; Abdulmanan, Yahaya; Emmanuel, Adeyemi Tope; Muhammad, Jibril; Mohammed, Modu Adam; Izegboya, Akpasa; Donald, Otuyemi Olayinka; Balarabe, Sani

    2017-07-21

    Background Bullying is a worldwide problem with varying consequences. Victims of school bullying may be targeted for many reasons including their appearance. They may also fear school and have difficulties in concentration. Objective This study aimed to determine the prevalence of bullying amongst adolescents in Kano, Northern Nigeria, the contribution of physical features and the perceived effect of bullying on their academic performance and school attendance. Subjects and methods Eight hundred and thirty-five students aged between 12 years and 17 years from eight randomly selected secondary schools in Kano, Nigeria took part in this study. Data collection was by self-administered questionnaires and analysis was by SPSS version 17. Results The pupils' mean age and standard deviation was 14.79 + 1.53 years. There were more male and private school pupils with 55.1% and 62%, respectively. About 43% of respondents reported being victims of bullying while about 32% had bullied someone else. There was more bullying in public schools than in private schools (p-value = 0.003). However, there was no significant gender difference (p > 0.05). More bullied pupils hated being in or outside the classroom (p bullied pupils played truant than non-bullied (p bullying felt it had consequences on their academic performance. Bullies frequently targeted general physical and dento-facial appearance. Conclusion The prevalence of bullying was high among the sampled population especially within public schools. This also had a significant negative effect on the students' academic performance.

  9. Treatment and posttreatment effects of mandibular cervical headgear followed by fixed appliances in Class III malocclusion.

    Science.gov (United States)

    Rey, Diego; Angel, David; Oberti, Giovanni; Baccetti, Tiziano

    2008-03-01

    In this cephalometric investigation, we compared the treatment and posttreatment effects on patients undergoing an initial phase of mandibular cervical headgear (MCH) therapy followed later by comprehensive edgewise therapy with untreated Class III controls. The treated sample consisted of 21 patients treated consecutively with MCH before the pubertal growth spurt (average age, 10 years 2 months at the beginning of treatment). At the final observation period (average age, 15 years 3 months), all patients were in decelerative growth phases as determined by the cervical vertebral maturation method. Active treatment and posttreatment effects were evaluated in the treated group with nonparametric statistical analysis for paired samples. The treated sample was compared with a nonparametric statistical test for independent samples with 20 untreated Class III subjects who were matched for malocclusion, sex, and stage of cervical vertebral maturation to the treatment group. MCH therapy followed by fixed appliances was shown to be an effective treatment for the correction of skeletal Class III malocclusion at postpubertal observation. The favorable skeletal effects consisted mainly of smaller increases in mandibular length and advancement with respect to the controls, with the final outcome of significant improvements in the sagittal skeletal (+4 mm for the Wits appraisal) and dental (+2.7 mm for overjet, -4.4 mm for molar relationship) parameters. This treatment protocol also induced significant downward rotation of the mandible (2.8 degrees ).

  10. Dental compensation for moderate Class III with vertical growth pattern by extraction of the lower second molars.

    Science.gov (United States)

    Jacobs, Collin; Jacobs-Müller, Claudia; Hoffmann, Viviana; Meila, Dan; Erbe, Christina; Krieger, Elena; Wehrbein, Heiner

    2012-01-01

    Analysis of the effects and side effects of treatment of patients with moderate skeletal Class III and vertical growth pattern by means of extraction of the second molars in the lower jaw. A total of 20 patients with a mean age of 12.9 years were examined retrospectively. Inclusion criteria consisted of a Wits value of 0 to -5, a posterior growth pattern of the mandible (Hasund analysis), an overjet of -2 to 1 mm, and an overbite of 0 to -3 mm. Treatment was performed using a straight-wire appliance. As part of the treatment, the lower second molars were extracted and Class III elastics attached. Cephalograms and orthopantomograms taken before and after treatment were used for evaluation. Treatment resulted in a significant change in the mean overjet from 0.5 mm to 2.1 mm and the attainment of a positive mean overbite of -1.0 mm to 0.9 mm. The occlusal plane rotated anteriorly from 18.8° to 13.7°. The skeletal parameters showed a change in the Wits value from -3.3 mm to -1.4 mm and an anterior mandibular rotation (ML-NSL 35.5° vs. 32.0°). The soft tissues revealed an increase in the distance between the lower lip and the "esthetic line" to the posterior (-2.0 mm vs. -3.9 mm). Dental compensation of moderate skeletal Class III with a tendency to an anterior open bite with vertical growth pattern by extracting the lower second molars, combined with Class III elastics, resulted in an anterior rotation of the occlusal plane and mandible. Eighteen of 20 patients achieved a physiological overjet and positive overbite. A prerequisite for this therapy is the presence of lower wisdom teeth; a potential side effect is elongation of the upper second molars.

  11. Surgical–orthodontic treatment of a skeletal class III malocclusion

    Science.gov (United States)

    Katiyar, Radha; Singh, G. K.; Mehrotra, Divya; Singh, Alka

    2010-01-01

    For patients whose orthodontic problems are so severe that neither growth modification nor camouflage offers a solution, surgery to realign the jaws or reposition dentoalveolar segments is the only possible treatment option left. One indication for surgery obviously is a malocclusion too severe for orthodontics alone. It is possible now to be at least semiquantitative about the limits of orthodontic treatment, in the context of producing normal occlusion as the diagrams of the “envelope of discrepancy” indicate. In this case report we present orthognathic treatment plan of an adult female patient with skeletal class III malocclusion. Patient's malocclusion was decompensated by orthodontic treatment just before the surgery and then normal jaw relationship achieved by bilateral sagittal split osteotomy. PMID:22442586

  12. Corticotomy-assisted orthodontic camouflage in a class III adult patient with a severe transverse discrepancy.

    Science.gov (United States)

    Gracco, Antonio; Finotti, Marco; Bruno, Giovanni; de Stefani, Alberto

    2018-04-06

    A 25-year-old man presented with a maxillary transverse discrepancy, posterior cross bite, anterior open bite, molar and canine class III. Treatment included a corticotomy in the upper lateral and posterior teeth, a palatal expansor and a sectional archwire to assist the expansion. The following treatment phase included bonding with Incognito System lingual appliance, interproximal reduction to solve the crowding and bite blocks to control the verticality. Two months after the bonding intermaxillary class III elastics were used to solve the sagittal discrepancy and eight months after the bonding vertical elastics were used in order to solve the anterior open bite until the end of the treatment. A Boston splint was applied for the upper arch, an essix splint was applied for the lower arch. The patient compliance was an essential aspect in the success of the orthodontic treatment. Copyright © 2018. Published by Elsevier Masson SAS.

  13. Camouflage of moderate Class III malocclusions with extraction of lower second molars and mandibular cervical headgear.

    Science.gov (United States)

    Mora, Diego Rey; Oberti, Giovanni; Ealo, Martha; Baccetti, Tiziano

    2007-01-01

    Orthodontic camouflage in patients with slight or moderate skeletal Class III malocclusions, can be obtained through different treatment alternatives. The purpose of this paper is to present a treatment that has not been described in the literature and which consists of the extraction of lower second molars and distal movement of the posterior segments by means of mandibular cervical headgear (MCH) and fixed appliances as a camouflage alternative. The force applied by the MCH was 250 gr per side (14hr/day). The total treatment time was 1 1/2 years. the extraction of lower second molars along with the use of mandibular cervical headgear is a good treatment alternative for camouflage in moderate Class III patients in order to obtain good occlusal relationships without affecting facial esthetics or producing marked dental compensations.

  14. Arts and Crafts Classes in Years I–III, Based on Methods Featuring Pupils’ Practical Activities

    OpenAIRE

    Piwowarska, Ewa

    2016-01-01

    The issue to be analysed here concerns teachers’ planning of arts and crafts classes in Years I–III, with specific reference to methods featuring pupils’ practical activities. A theoretical part briefly presents the concepts involved in teaching a subject that was initially defined as drawing, then as arts and crafts education, and finally as arts and crafts classes. It points out the factors that influence the process of stimulating pupils’ artistic activities. The technique used in the cour...

  15. Localisation of deformations of the midfacial complex in subjects with class III malocclusions employing thin-plate spline analysis.

    Science.gov (United States)

    Singh, G D; McNamara, J A; Lozanoff, S

    1997-11-01

    This study determines deformations of the midface that contribute to a class III appearance, employing thinplate spline analysis. A total of 135 lateral cephalographs of prepubertal children of European-American descent with either class III malocclusions or a class I molar occlusion were compared. The cephalographs were traced and checked, and 7 homologous landmarks of the midface were identified and digitised. The data sets were scaled to an equivalent size and subjected to Procrustes analysis. These statistical tests indicated significant differences (P spline analysis indicated that both affine and nonaffine transformations contribute towards the total spline for the averaged midfacial configuration. For nonaffine transformations, partial warp 3 had the highest magnitude, indicating the large scale deformations of the midfacial configuration. These deformations affected the palatal landmarks, and were associated with compression of the midfacial complex in the anteroposterior plane predominantly. Partial warp 4 produced some vertical compression of the posterior aspect of the midfacial complex whereas partial warps 1 and 2 indicated localised shape changes of the maxillary alveolus region. large spatial-scale deformations therefore affect the midfacial complex in an anteroposterior axis, in combination with vertical compression and localised distortions. These deformations may represent a developmental diminution of the palatal complex anteroposteriorly that, allied with vertical shortening of midfacial height posteriorly, results in class III malocclusions with a retrusive midfacial profile.

  16. 40 CFR Figure C-2 to Subpart C of... - Illustration of the Slope and Intercept Limits for Class II and Class III PM2.5 Candidate...

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 5 2010-07-01 2010-07-01 false Illustration of the Slope and Intercept Limits for Class II and Class III PM2.5 Candidate Equivalent Methods C Figure C-2 to Subpart C of Part 53... Methods and Reference Methods Pt. 53, Subpt. C, Fig. C-2 Figure C-2 to Subpart C of Part 53—Illustration...

  17. Can a surgery-first orthognathic approach reduce the total treatment time?

    Science.gov (United States)

    Jeong, Woo Shik; Choi, Jong Woo; Kim, Do Yeon; Lee, Jang Yeol; Kwon, Soon Man

    2017-04-01

    Although pre-surgical orthodontic treatment has been accepted as a necessary process for stable orthognathic correction in the traditional orthognathic approach, recent advances in the application of miniscrews and in the pre-surgical simulation of orthodontic management using dental models have shown that it is possible to perform a surgery-first orthognathic approach without pre-surgical orthodontic treatment. This prospective study investigated the surgical outcomes of patients with diagnosed skeletal class III dentofacial deformities who underwent orthognathic surgery between December 2007 and December 2014. Cephalometric landmark data for patients undergoing the surgery-first approach were analyzed in terms of postoperative changes in vertical and horizontal skeletal pattern, dental pattern, and soft tissue profile. Forty-five consecutive Asian patients with skeletal class III dentofacial deformities who underwent surgery-first orthognathic surgery and 52 patients who underwent conventional two-jaw orthognathic surgery were included. The analysis revealed that the total treatment period for the surgery-first approach averaged 14.6 months, compared with 22.0 months for the orthodontics-first approach. Comparisons between the immediate postoperative and preoperative and between the postoperative and immediate postoperative cephalometric data revealed factors that correlated with the total treatment duration. The surgery-first orthognathic approach can dramatically reduce the total treatment time, with no major complications. Copyright © 2016 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  18. THERAPEUTIC DIFFICULTIES IN ACHIEVEMENT OF OPTIMAL ROOT COVERAGE AND AESTHETIC IN CLASS III GINGIVAL RECESSION.

    Directory of Open Access Journals (Sweden)

    Christina Popova

    2013-07-01

    Full Text Available The width of the attached gingiva is defined as a distance between the depth of the gingival sulcus or gingival/periodontal pocket to the mucogingival junction. Authors suggest that a minimal amount of attached gingiva is necessary to ensure the gingival health. When the buccal bone plate and gingival tissues are thin and the position of the tooth is too vestibular gingival margin often displaces apically, and gingival recession develops. In the presence of gingival recession and reduced vestibular depth oral hygiene procedures are embarrassed.The definition of class III gingival recession is marginal lack of tissue extended to/or beyond the mucogingival junction with bone and soft tissue loss interdentally or malpositioning of the tooth.Prognosis for class III and IV gingival recession is that only partial coverage can be expected after root coverage procedures - FGG (free gingival graft or connective tissue graft (CTG. Adjunctive surgical techniques would be helpful to achieve better aesthetic outcomes.

  19. Management of skeletal Class III malocclusion with unilateral crossbite on a growing patient using facemask-bonded rapid palatal expander and fixed appliances

    Directory of Open Access Journals (Sweden)

    Tinnie Effendy

    2015-01-01

    Full Text Available Facemask (FM and bonded rapid palatal expander (RPE are part of growth modification treatments for correcting skeletal Class III pattern with retrognathic maxilla. This orthopaedic treatment is usually preceded by fixed appliances to achieve aesthetic dental alignment and improve interdigitation. This case report reviews treatment of Class III malocclusion with unilateral crossbite in a 12-year-old boy using FM and bonded RPE, followed by fixed appliances. Choice of FM and bonded RPE was in line with indication which was mild Class III malocclusion with retrognathic maxilla. Execution of treatment was made considering treatment biomechanics and patient cooperation. This orthopaedic treatment was followed by orthodontic treatment specifically aimed to correct unilateral crossbite, canine relationship yet to reach Class I, lower midline shift, as well as unintended dental consequences of using bonded RPE, namely posterior open bite and deepening curve of spee. Posttreatment facial profile and smile are more esthetic. Occlusion is significantly improved both functionally and aesthetically.

  20. Association between class III obesity (BMI of 40-59 kg/m2 and mortality: a pooled analysis of 20 prospective studies.

    Directory of Open Access Journals (Sweden)

    Cari M Kitahara

    2014-07-01

    Full Text Available The prevalence of class III obesity (body mass index [BMI]≥40 kg/m2 has increased dramatically in several countries and currently affects 6% of adults in the US, with uncertain impact on the risks of illness and death. Using data from a large pooled study, we evaluated the risk of death, overall and due to a wide range of causes, and years of life expectancy lost associated with class III obesity.In a pooled analysis of 20 prospective studies from the United States, Sweden, and Australia, we estimated sex- and age-adjusted total and cause-specific mortality rates (deaths per 100,000 persons per year and multivariable-adjusted hazard ratios for adults, aged 19-83 y at baseline, classified as obese class III (BMI 40.0-59.9 kg/m2 compared with those classified as normal weight (BMI 18.5-24.9 kg/m2. Participants reporting ever smoking cigarettes or a history of chronic disease (heart disease, cancer, stroke, or emphysema on baseline questionnaires were excluded. Among 9,564 class III obesity participants, mortality rates were 856.0 in men and 663.0 in women during the study period (1976-2009. Among 304,011 normal-weight participants, rates were 346.7 and 280.5 in men and women, respectively. Deaths from heart disease contributed largely to the excess rates in the class III obesity group (rate differences = 238.9 and 132.8 in men and women, respectively, followed by deaths from cancer (rate differences = 36.7 and 62.3 in men and women, respectively and diabetes (rate differences = 51.2 and 29.2 in men and women, respectively. Within the class III obesity range, multivariable-adjusted hazard ratios for total deaths and deaths due to heart disease, cancer, diabetes, nephritis/nephrotic syndrome/nephrosis, chronic lower respiratory disease, and influenza/pneumonia increased with increasing BMI. Compared with normal-weight BMI, a BMI of 40-44.9, 45-49.9, 50-54.9, and 55-59.9 kg/m2 was associated with an estimated 6.5 (95% CI: 5.7-7.3, 8

  1. Treating dental crowding with mandibular incisor extraction in an Angle Class I patient

    Directory of Open Access Journals (Sweden)

    Gislana Braga Machado

    2015-06-01

    Full Text Available Mandibular dental crowding often encourages patients to seek orthodontic treatment. The orthodontist should decide between protrusion of incisors or decrease in dental volume so as to achieve proper alignment and leveling. The present study reports the treatment of an Angle Class I malocclusion adolescent female brachyfacial patient with severe mandibular dental crowding, increased curve of Spee and deep overbite. The patient was treated with extraction of a mandibular incisor. This case was presented to the Brazilian Board of Orthodontics and Dentofacial Orthopedics (BBO as a requirement for the title of certified by the BBO.

  2. Orthodontic clockwise rotation of maxillomandibular complex for improving facial profile in late teenagers with Class III malocclusion: A preliminary report

    Directory of Open Access Journals (Sweden)

    Eric JW Liou

    2018-01-01

    Full Text Available Objective: Orthodontic camouflage treatments improve occlusion but might worsen facial profile in patients with Class III malocclusion. It has been reported that surgical clockwise rotation of maxillomandibular complex (MMc improves facial profile by reducing chin prominence and chin throat length in patients with Class III malocclusion. The purpose of this report was to illustrate two orthodontic techniques for clockwise rotation of the MMc in late teenagers with Class III malocclusion and preliminarily evaluate their clinical effects. Patients and Methods: Six patients in late teenage with Class III malocclusion were included in this preliminary report. Bite raisers were first placed on the upper molars to open the bite and clockwise rotate the mandible. Intermaxillary elastics were then applied vertically between the upper and lower dentitions in 3 patients for bimaxillary extrusion (Technique-1 or between the upper dentition and the lower temporary anchorage devices (TADs in another 3 patients (Technique-2 for upper dentition extrusion and closure of the anterior open bite. The three-dimensional cone-beam computed tomography images taken before and after orthodontic treatment were superimposed to evaluate the treatment effects of MMc clockwise rotation for both techniques. Results: The Technique-1 extruded the upper and lower dentitions, rotated the mandible clockwise 2.01°, moved chin down 2.98 mm, and back −1.64 mm, although the mandible grew 2.47 mm during the treatment period. The Technique-2 extruded the upper dentition, rotated the mandible clockwise 0.90°, moved chin down 1.78 mm, but slightly forward 0.47 mm due to the mandible grew 2.50 mm and lower dentition was not extruded. Conclusions: The orthodontic clockwise rotation of MMc is an effective technique for orthognathic camouflage. The applications of bite raisers and bimaxillary dentition extrusion could be more effective than single dentition extrusion with TADs in the

  3. Comprehensive evaluation of functional and anatomical disorders of the patients with distal occlusion and accompanying obstructive sleep apnea syndrome

    Science.gov (United States)

    Nabiev, F. H.; Dobrodeev, A. S.; Libin, P. V.; Kotov, I. I.; Ovsyannikov, A. G.

    2015-11-01

    The paper defines the therapeutic and rehabilitation approach to the patients with Angle's classification Class II dento-facial anomalies, accompanied by obstructive sleep apnea (OSA). The proposed comprehensive approach to the diagnostics and treatment of patients with posterior occlusion, accompanied by OSA, allows for objective evaluation of intensity of a dento-facial anomaly and accompanying respiratory disorders in the nasal and oral pharynx, which allows for the pathophysiological mechanisms of OSA to be identified, and an optimal plan for surgical procedures to be developed. The proposed comprehensive approach to the diagnostics and treatment of patients with Angle's classification Class II dento-facial anomalies provides high functional and aesthetic results.

  4. Aesthetic and functional outcomes using a multiloop edgewise archwire for camouflage orthodontic treatment of a severe Class III open bite malocclusion.

    Science.gov (United States)

    Marañón-Vásquez, Guido Artemio; Soldevilla Galarza, Luciano Carlos; Tolentino Solis, Freddy Antonio; Wilson, Cliff; Romano, Fábio Lourenço

    2017-09-01

    Occasionally, orthodontists will be challenged to treat malocclusions and skeletal disharmonies, which by their complexity one might think that the only treatment alternative is the surgical-orthodontic approach. A male patient, aged 17 years old, was diagnosed with a skeletal Class III malocclusion, anterior open bite and negative overjet. An unpleasant profile was the patient's 'chief complaint' showing interest in facial aesthetics improvement. Nevertheless, the patient and his parents strongly preferred a non-surgical treatment approach. He was treated with a multiloop edgewise archwire to facilitate uprighting and distal en-masse movement of lower teeth, correct the Class III open bite malocclusion, change the inclination of the occlusal plane and obtain the consequent morphological-functional adaptation of the mandible. The Class III malocclusion was corrected and satisfactory changes in the patient's profile were obtained. Active treatment was completed in 2 years, and facial result remained stable at 2 years 6 months after debonding.

  5. Class III camouflage using skeletal anchorage and Pendex appliance.

    Science.gov (United States)

    Miguel, José Augusto M; Zanardi, Gustavo

    2011-01-01

    This case report describes the orthodontic treatment for a young female, aged 18 years 4 months, with a Class III malocclusion on the right side, with a combination of a posterior and anterior crossbite. Two rigid orthodontic mini-implants were placed in the retromolar region in order to move the entire lower arch distally with nickel-titanium coil springs. In addition, a Pendex appliance was used to create space and to improve the arch form and the transverse relationship. The active treatment period was 17 months. Normal overjet and overbite were obtained, and facial balance was improved. Although the cephalometric superimposition has demonstrated the effects of dental compensation, the final dental and facial results were satisfactory and stable after the second year in retention. Copyright © 2011 Società Italiana di Ortodonzia SIDO. Published by Elsevier Srl. All rights reserved.

  6. 40 CFR Figure C-3 to Subpart C of... - Illustration of the Slope and Intercept Limits for Class II and Class III PM10−2.5 Candidate...

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 5 2010-07-01 2010-07-01 false Illustration of the Slope and Intercept Limits for Class II and Class III PM10â2.5 Candidate Equivalent Methods C Figure C-3 to Subpart C of Part... Candidate Methods and Reference Methods Pt. 53, Subpt. C, Fig. C-3 Figure C-3 to Subpart C of Part 53...

  7. [Early orthodontic treatment of children with dentofacial anomalies in the mixed dentition with the use of fixed appliances].

    Science.gov (United States)

    Arsenina, O I; Ivanova, Yu A; Popova, N V; Popova, A V

    The article summarizes the authors experience in the treatment of patients with dentofacial anomalies in mixed dentition with fixed orthodontic appliances ("system 2×4") and combined treatment type with the use of extraoral device. Indications and contraindications, advantages and disadvantages, special conditions of the treatment, the mechanism of a face-bow action with extraoral traction, the sequence of events during the treatment are described in the article. Clinical cases of early treatment with "system 2×4" and in combination with the face-bow and extraoral traction demonstrate the effectiveness of the methods.

  8. Má oclusão Classe III, com mordida cruzada posterior unilateral e assimetria facial Class III malocclusion with unilateral posterior crossbite and facial asymmetry

    Directory of Open Access Journals (Sweden)

    Silvio Rosan de Oliveira

    2010-10-01

    Full Text Available Este artigo relata o tratamento ortodôntico realizado em uma paciente adulta, com 36 anos de idade, portadora de um padrão esquelético e dentário de Classe III, com mordida cruzada posterior unilateral esquerda e assimetria mandibular, além de uma diferença relativamente grande entre máxima intercuspidação habitual (MIH e relação cêntrica (RC. O tratamento foi realizado com expansão dentária superior, contração dentária inferior e descruzamento anterior, eliminando a diferença entre MIH e RC. O resultado obtido foi pautado sobre um diagnóstico criterioso e um planejamento de compensação ortodôntica, sem intervenção cirúrgica nos maxilares, por solicitação da paciente. Este caso foi apresentado à Diretoria do Board Brasileiro de Ortodontia e Ortopedia Facial (BBO, representando a categoria 5, ou seja, má oclusão com problema transverso, apresentando pelo menos um quadrante em cruzamento, como parte dos requisitos para obtenção do título de Diplomado pelo BBO.This article reports on the orthodontic treatment performed on a 36-year-old female patient with skeletal and dental Class III pattern, presenting with a left unilateral posterior crossbite and mandibular asymmetry, and a relatively significant difference between maximum intercuspation (MIC and centric relation (CR. The treatment was performed with maxillary dental expansion, mandibular dental contraction and anterior crossbite correction, eliminating the difference between MIC and CR. Results were based on careful diagnosis and planning of orthodontic compensation without surgical intervention in the maxilla, at the request of the patient. This case was presented to the Brazilian Board of Orthodontics and Facial Orthopedics (BBO as representative of Category 5, i.e., malocclusion with a transverse problem, presenting with a crossbite in at least one of the quadrants, as part of the requirements for obtaining the BBO Certificate.

  9. Identification of diverse archaeal proteins with class III signal peptides cleaved by distinct archaeal prepilin peptidases

    NARCIS (Netherlands)

    Szabó, Zalán; Oliveira Stahl, Adriana; Albers, Sonja-V.; Kissinger, Jessica C.; Driessen, Arnold J.M.; Pohlschröder, Mechthild; Pohlschroder, M.

    2007-01-01

    Most secreted archaeal proteins are targeted to the membrane via a tripartite signal composed of a charged N terminus and a hydrophobic domain, followed by a signal peptidase-processing site. Signal peptides of archaeal flagellins, similar to class III signal peptides of bacterial type IV pilins,

  10. Surgical-orthodontic treatment of Class III malocclusion with agenesis of lateral incisor and unerupted canine

    Directory of Open Access Journals (Sweden)

    Bruno Boaventura Vieira

    2013-06-01

    Full Text Available INTRODUCTION: Orthodontic-surgical treatment was performed in patient with skeletal Class III malocclusion due to exceeding mandibular growth. Patient also presented upper and lower dental protrusion, overjet of -3.0 mm, overbite of -1.0 mm, congenital absence of tooth #22, teeth #13 and supernumerary impaction, tooth #12 with conoid shape and partly erupted in supraversion, prolonged retention of tooth #53, tendency to vertical growth of the face and facial asymmetry. The discrepancy on the upper arch was -2.0 mm and -5.0 mm on the lower arch. METHODS: The pre-surgical orthodontic treatment was performed with extractions of the teeth #35 and #45. On the upper arch, teeth #53, #12 and supernumerary were extracted to accomplish the traction of the impacted canine. The spaces of the lower extractions were closed with mesialization of posterior segment. After aligning and leveling the teeth, extractions spaces closure and correct positioning of teeth on the bone bases, the correct intercuspation of the dental arch, with molars and canines in Angle's Class I, coincident midline, normal overjet and overbite and ideal torques, were evaluated through study models. The patient was submitted to orthognathic surgery and then the post-surgical orthodontic treatment was finished. RESULTS: The Class III malocclusion was treated establishing occlusal and facial normal standards.

  11. Current and evolving approaches for improving the oral permeability of BCS Class III or analogous molecules.

    Science.gov (United States)

    Dave, Vivek S; Gupta, Deepak; Yu, Monica; Nguyen, Phuong; Varghese Gupta, Sheeba

    2017-02-01

    The Biopharmaceutics Classification System (BCS) classifies pharmaceutical compounds based on their aqueous solubility and intestinal permeability. The BCS Class III compounds are hydrophilic molecules (high aqueous solubility) with low permeability across the biological membranes. While these compounds are pharmacologically effective, poor absorption due to low permeability becomes the rate-limiting step in achieving adequate bioavailability. Several approaches have been explored and utilized for improving the permeability profiles of these compounds. The approaches include traditional methods such as prodrugs, permeation enhancers, ion-pairing, etc., as well as relatively modern approaches such as nanoencapsulation and nanosizing. The most recent approaches include a combination/hybridization of one or more traditional approaches to improve drug permeability. While some of these approaches have been extremely successful, i.e. drug products utilizing the approach have progressed through the USFDA approval for marketing; others require further investigation to be applicable. This article discusses the commonly studied approaches for improving the permeability of BCS Class III compounds.

  12. Macroglosia asociada con deformidades dentofaciales: Alternativas terapéuticas y presentación de un caso Macroglossia associated with dentofacial deformities: Therapeutic alternatives and a case report

    Directory of Open Access Journals (Sweden)

    José Manuel Díaz Fernández

    2006-12-01

    Full Text Available Se lleva a efecto una revisión bibliográfica de las alternativas de tratamiento en la corrección de la macroglosia asociada con deformidades dentofaciales. Se establecen las alternativas quirúrgicas ortodóncicas, así como las indicaciones y ventajas de cada variante operatoria. Se presenta un caso clínico donde ambas condiciones patológicas están presentes. Se emiten algunas consideraciones cuando se ejecuta una glosectomía de reducción en pacientes con anomalías dentofaciales.A bibliographic review of the treatment alternatives for the correction of macroglossia associated with dentofacial deformities is made. The surgical orthodontic alternatives are established, as well as the indications and advantages of every operative variant. A clinical case with both pathological conditions is reported. Some considerations are given when a reduction glossectomy is performed in patients with dentofacial abnormalities.

  13. Management of a severe Class III malocclusion with extreme dentoalveolar compensations.

    Science.gov (United States)

    Nehra, Karan; Sharma, Vineet; Mitra, Rajat

    2012-01-01

    This case report describes the treatment of a 21-year-old woman with a severe Class III malocclusion, 9-mm anterior crossbite, extremely proclined maxillary anterior incisors associated with decreased buccolingual alveolar width, and a malformed supernumerary tooth. The treatment plan included fixed appliances to align and level the teeth, en masse retraction of maxillary anterior incisors after a labial and palatal corticotomy using temporary anchorage devices, high Le Fort I maxillary osteotomy for maxillary advancement, and bilateral sagittal split osteotomy for mandibular setback. Ideal overjet and overbite relationships were established, and the final esthetic result was pleasing. Occlusal stability was excellent in the 1-year follow-up.

  14. Temporomandibular disorders in growing patients after treatment of class II and III malocclusion with orthopaedic appliances: a systematic review.

    Science.gov (United States)

    Jiménez-Silva, Antonio; Carnevali-Arellano, Romano; Venegas-Aguilera, Matías; Tobar-Reyes, Julio; Palomino-Montenegro, Hernán

    2018-05-01

    To determine if the use of orthopaedic appliances in growing patients applied to correct Class II and III malocclusion is related to the development of temporomandibular disorders (TMD). A systematic review was conducted between 1960 and July 2017, based on electronic databases: PubMed, Cochrane Library, Embase, Medline, Scopus, EBSCOhost, Scielo, Lilacs and Bireme. Controlled clinical trials (CCTs) and randomized controlled trials (RCTs) were identified. The articles were selected and analyzed by two authors independently. The quality of the evidence was determined according to the guidelines of the Cochrane Risk Bias Assessment Tool and the Cochrane Quality Study Guide. Seven articles were included, four CCTs and three RCTs. The studies were grouped according to malocclusion treatment in (a) class II appliances (n = 4) and (b) class III appliances (n = 3). The quality of evidence was low due to the high risk of bias, independent of the association reported. All studies concluded that the use of orthopaedic appliances would not contribute to the development of TMD. The quality of evidence available is insufficient to establish definitive conclusions, since the studies were very heterogeneous and presented a high risk of bias. However, it is suggested that the use of orthopaedic appliances to correct class II and III malocclusion in growing patients would not be considered as a risk factor for the development of TMD. High-quality RCTs are required to draw any definitive conclusions.

  15. Miniplate-Aided Mandibular Dentition Distalization as a Camouflage Treatment of a Class III Malocclusion in an Adult

    Directory of Open Access Journals (Sweden)

    Zaki Hakami

    2018-01-01

    Full Text Available This case report describes orthodontic camouflage treatment for a 32-year-old African American male patient with Class III malocclusion. The treatment included nonextraction, nonsurgical orthodontic camouflage by en masse distalization of the mandibular teeth using skeletal anchorage devices. The total treatment time was 23 months. Normal overjet and overbite with Class I occlusion were obtained despite the compensated dentition to the skeletal malocclusion. His smile esthetics was significantly improved at the completion of his treatment.

  16. Miniplate-Aided Mandibular Dentition Distalization as a Camouflage Treatment of a Class III Malocclusion in an Adult.

    Science.gov (United States)

    Hakami, Zaki; Chen, Po Jung; Ahmida, Ahmad; Janakiraman, Nandakumar; Uribe, Flavio

    2018-01-01

    This case report describes orthodontic camouflage treatment for a 32-year-old African American male patient with Class III malocclusion. The treatment included nonextraction, nonsurgical orthodontic camouflage by en masse distalization of the mandibular teeth using skeletal anchorage devices. The total treatment time was 23 months. Normal overjet and overbite with Class I occlusion were obtained despite the compensated dentition to the skeletal malocclusion. His smile esthetics was significantly improved at the completion of his treatment.

  17. Diagnosis and conservative treatment of skeletal Class III malocclusion with anterior crossbite and asymmetric maxillary crowding.

    Science.gov (United States)

    Tseng, Linda L Y; Chang, Chris H; Roberts, W Eugene

    2016-04-01

    A man, aged 28 years 9 months, came for an orthodontic consultation for a skeletal Class III malocclusion (ANB angle, -3°) with a modest asymmetric Class II and Class III molar relationship, complicated by an anterior crossbite, a deepbite, and 12 mm of asymmetric maxillary crowding. Despite the severity of the malocclusion (Discrepancy Index, 37), the patient desired noninvasive camouflage treatment. The 3-Ring diagnosis showed that treatment without extractions or orthognathic surgery was a viable approach. Arch length analysis indicated that differential interproximal enamel reduction could resolve the crowding and midline discrepancy, but a miniscrew in the infrazygomatic crest was needed to retract the right buccal segment. The patient accepted the complex, staged treatment plan with the understanding that it would require about 3.5 years. Fixed appliance treatment with passive self-ligating brackets, early light short elastics, bite turbos, interproximal enamel reduction, and infrazygomatic crest retraction opened the vertical dimension of the occlusion, improved the ANB angle by 2°, and achieved excellent alignment, as evidenced by a Cast Radiograph Evaluation score of 28 and a Pink and White dental esthetic score of 3. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

  18. Nonsurgical correction of a Class III malocclusion in an adult by miniscrew-assisted mandibular dentition distalization.

    Science.gov (United States)

    Jing, Yan; Han, Xianglong; Guo, Yongwen; Li, Jingyu; Bai, Ding

    2013-06-01

    This article reports the successful use of miniscrews in the mandible to treat a 20-year-old Mongolian woman with a chief complaint of anterior crossbite. The patient had a skeletal Class III malocclusion with a mildly protrusive mandible, an anterior crossbite, and a deviated midline. In light of the advantages for reconstruction of the occlusal plane and distal en-masse movement of the mandibular arch, we used a multiloop edgewise archwire in the initial stage. However, the maxillary incisors were in excessive labioversion accompanied by little retraction of the mandibular incisors; these results were obviously not satisfying after 4 months of multiloop edgewise archwire treatment. Two miniscrews were subsequently implanted vertically in the external oblique ridge areas of the bilateral mandibular ramus as skeletal anchorage for en-masse distalization of the mandibular dentition. During treatment, the mandibular anterior teeth were retracted about 4.0 mm without negative lingual inclinations. The movement of the mandibular first molar was almost bodily translation. The maxillary incisors maintained good inclinations by rotating their brackets 180° along with the outstanding performance of the beta-titanium wire. The patient received a harmonious facial balance, an attractive smile, and ideal occlusal relationships. The outcome was stable after 1 year of retention. Our results suggest that the application of miniscrews in the posterior area of the mandible is an effective approach for Class III camouflage treatment. This technique requires minimal compliance and is particularly useful for correcting Class III patients with mild mandibular protrusion and minor crowding. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

  19. Pseudomonas aeruginosa Exhibits Deficient Biofilm Formation in the Absence of Class II and III Ribonucleotide Reductases Due to Hindered Anaerobic Growth.

    Science.gov (United States)

    Crespo, Anna; Pedraz, Lucas; Astola, Josep; Torrents, Eduard

    2016-01-01

    Chronic lung infections by the ubiquitous and extremely adaptable opportunistic pathogen Pseudomonas aeruginosa correlate with the formation of a biofilm, where bacteria grow in association with an extracellular matrix and display a wide range of changes in gene expression and metabolism. This leads to increased resistance to physical stress and antibiotic therapies, while enhancing cell-to-cell communication. Oxygen diffusion through the complex biofilm structure generates an oxygen concentration gradient, leading to the appearance of anaerobic microenvironments. Ribonucleotide reductases (RNRs) are a family of highly sophisticated enzymes responsible for the synthesis of the deoxyribonucleotides, and they constitute the only de novo pathway for the formation of the building blocks needed for DNA synthesis and repair. P. aeruginosa is one of the few bacteria encoding all three known RNR classes (Ia, II, and III). Class Ia RNRs are oxygen dependent, class II are oxygen independent, and class III are oxygen sensitive. A tight control of RNR activity is essential for anaerobic growth and therefore for biofilm development. In this work we explored the role of the different RNR classes in biofilm formation under aerobic and anaerobic initial conditions and using static and continuous-flow biofilm models. We demonstrated the importance of class II and III RNR for proper cell division in biofilm development and maturation. We also determined that these classes are transcriptionally induced during biofilm formation and under anaerobic conditions. The molecular mechanism of their anaerobic regulation was also studied, finding that the Anr/Dnr system is responsible for class II RNR induction. These data can be integrated with previous knowledge about biofilms in a model where these structures are understood as a set of layers determined by oxygen concentration and contain cells with different RNR expression profiles, bringing us a step closer to the understanding of this

  20. [Improving the effectiveness of functional jaw orthopedics in Class II malocclusion by appropriate treatment timing].

    Science.gov (United States)

    Baccetti, Tiziano

    2010-12-01

    Time can be considered the fourth dimension in dento-facial orthopedics. Treatment timing can play a significant role in the outcomes of treatment aimed to produce an orthopedic effect in the craniofacial structures. The results of methodologically-sound cephalometric studies of both the past and the recent history of orthodontics clearly indicate that optimal treatment timing for Class II skeletal disharmony with a functional appliance (e.g. twin block) is during or slightly after the peak in mandibular growth as revealed by a reliable biologic indicator of individual skeletal maturity such as the cervical vertebral maturation method. © EDP Sciences, SFODF, 2010.

  1. 3D dentofacial photogrammetry reference values: a novel approach to orthodontic diagnosis.

    Science.gov (United States)

    Masoud, Mohamed I; Bansal, Neetu; C Castillo, Jose; Manosudprasit, Amornrut; Allareddy, Veerasathpurush; Haghi, Arshan; Hawkins, Hannah C; Otárola-Castillo, Erik

    2017-04-01

    Orthodontic diagnostic standards generally use the cranial base as a reference and rely on samples selected by orthodontists. The purpose of this study was to provide male and female standards for a novel non-radiographic approach for orthodontic diagnosis that utilizes 3D dentofacial photogrammetry using the eyes and natural head orientation as references instead of the cranial base. One hundred and eighty females and 200 males between the ages of 18 and 35 years from 2 modeling agencies were orthodontically screened for near ideal occlusion. Subjects that met the inclusion criteria were rated by a sample of 40 lay people for attractiveness on a visual analogue scale. The final sample that had 3D facial and dental imaging included 49 subjects 25 males and 24 females with near ideal occlusion and considered attractive by the public. Inter and Intra-examiner ICC were greater than 0.8 for both landmarking and indexing. Relative to a coronal plane contacting the pupils (MC), the mean sagittal position of the alar curvature (representing the nasomaxillary complex) was 14.36 ± 3.08 mm in males and 12.4 ± 3.58 mm in females. The sagittal position of soft tissue pogonion relative to the pupils was 14.84 ± 3.63 mm in males and 12.78 ± 5.68 mm in females. The angle between the alar curvature and pogonion relative to the pupils was 9° in males and 10° in females. With the exception of the occlusal plane which was steeper in females, no ratios or angular facial measurements showed a significant gender difference. Relative to MC, males had more proclined upper incisors (20° vs 16°) and more retroclined Lower incisors (27° vs 31°; P > 0.05). A Procrustes ANOVA and permutation test showed that the shapes of males and females are different enough to be considered two distinct populations. 1. When using the proposed method for orthodontic diagnosis, male and female patients should be compared to their respective dentofacial standards. 2. Validation of the proposed method

  2. Lower lip deformity in patients with cleft and non-cleft Class III malocclusion before and after orthognathic surgery.

    Science.gov (United States)

    Park, Joo Seok; Koh, Kyung S; Choi, Jong Woo

    2015-10-01

    Orthognathic surgery does not yield the same cosmetic benefits in patients with Class III jaw deformities associated with clefts as for patients without clefts. Preoperative upper lip tightness caused by cleft lip repair may not fully explain this difference, suggesting that a lower lip deformity is present. The study compared the outcomes of orthognathic surgery in patients with cleft and non-cleft Class III malocclusion, focusing on lip relationship. The surgical records of 50 patients with Class III malocclusion, including 25 with and 25 without clefts, who had undergone orthognathic surgery, were retrospectively analyzed. Lateral cephalometric tracings, preoperatively and at 6 months postoperatively, were superimposed to analyze the soft tissue changes at seven reference points. At 6 months after surgery, there were no significant differences in skeletal location, whereas the soft tissues of the lower lip differed significantly between patients with and without cleft (p=0.002), indicating the persistence of a lower lip deformity in cleft patients. Moreover, the soft tissues of the lower lip receded in non-cleft patients and protruded in cleft patients after orthognathic surgery. Lower lip deformity and upper lip tightness may result in an unsatisfactory relationship between the upper and lower lips of patients with cleft-related jaw deformity after orthognathic surgery. Other factors were less important than the pathology of the lower lip. Copyright © 2015 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

  3. Control of lower incisor inclination with a completely customized lingual appliance for dentoalveolar compensation of class III malocclusion.

    Science.gov (United States)

    Lossdörfer, Stefan; Schwestka-Polly, Rainer; Wiechmann, Dirk

    2013-09-01

    Bracket slots and orthodontic archwires offering high dimensional precision are needed for fully customized lingual appliances. We aimed to investigate whether high-precision appliances of this type enable dentoalveolar compensation of class III malocclusion so that lower incisor inclination at the end of treatment will closely match the anticipated situation as defined in a pretreatment setup. This retrospective study included a total of 34 consecutive patients who had worn a fully customized lingual appliance to achieve dentoalveolar compensation for class III malocclusion by intermaxillary elastics, or proximal enamel reduction, or extraction of teeth in one or both jaws. Casts fabricated at different points in time were three-dimensionally scanned to analyze how precisely the lower incisor inclinations envisioned in the setup were implemented in clinical practice. Aside from minor deviations of ±3.75°, the lower incisor inclinations were clinically implemented as planned even in patients with major sagittal discrepancies. Treatment goals predefined in a setup of dentoalveolar compensation for class III malocclusion can be very precisely achieved via a customized lingual appliance. Correct planning can prevent undesirable lingual tipping of the lower incisors. This finding should not encourage a more liberal use of dentoalveolar compensation, but it should heighten clinicians' awareness of how essential it is to sufficiently consider the individual anatomy of the dentoalveolar complex during treatment planning.

  4. The Populus Class III HD ZIP, popREVOLUTA, influences cambium initiation and patterning of woody stems

    Science.gov (United States)

    Marcel Robischon; Juan Du; Eriko Miura; Andrew Groover

    2011-01-01

    The secondary growth of a woody stem requires the formation of a vascular cambium at an appropriate position and proper patterning of the vascular tissues derived from the cambium. Class III homeodomain-leucine zipper (HD ZIP) transcription factors have been implicated in polarity determination and patterning in lateral organs and primary vascular tissues and in the...

  5. Design specifications for ASME B and PV Code Section III nuclear class 1 piping

    International Nuclear Information System (INIS)

    Richardson, J.A.

    1978-01-01

    ASME B and PV Code Section III code regulations for nuclear piping requires that a comprehensive Design Specification be developed for ensuring that the design and installation of the piping meets all code requirements. The intent of this paper is to describe the code requirements, discuss the implementation of these requirements in a typical Class 1 piping design specification, and to report on recent piping failures in operating light water nuclear power plants in the US. (author)

  6. Skeletal anteroposterior discrepancy and vertical type effects on lower incisor preoperative decompensation and postoperative compensation in skeletal Class III patients.

    Science.gov (United States)

    Ahn, Hyo-Won; Baek, Seung-Hak

    2011-01-01

    To determine the initial compensation, preoperative decompensation, and postoperative compensation of the lower incisors according to the skeletal anteroposterior discrepancy and vertical type in skeletal Class III patients. The samples consisted of 68 skeletal Class III patients treated with two-jaw surgery and orthodontic treatment. Lateral cephalograms were taken before preoperative orthodontic treatment (T0) and before surgery (T1) and after debonding (T2). According to skeletal anteroposterior discrepancy/vertical type (ANB, criteria  =  -4°; SN-GoMe, criteria  =  35°) at the T0 stage, the samples were allocated into group 1 (severe anteroposterior discrepancy/hypodivergent vertical type, N  =  17), group 2 (moderate anteroposterior discrepancy/hypodivergent vertical type, N  =  17), group 3 (severe anteroposterior discrepancy/hyperdivergent vertical type, N  =  17), or group 4 (moderate anteroposterior discrepancy/hyperdivergent vertical type, N  =  17). After measurement of variables, one-way analysis of variance with Duncan's multiple comparison test, crosstab analysis, and Pearson correlation analysis were performed. At T0, groups 3 and 2 exhibited the most and least compensated lower incisors. In group 2, good preoperative decompensation and considerable postoperative compensation resulted in different values for T0, T1, and T2 (IMPA, T0 lower incisors in Class III patients.

  7. [Exploration for micro-osteotomy assisted orthodontic treatment of skeletal Class III malocclusions with alveolar hypoplasia in the lower anterior region].

    Science.gov (United States)

    Wang, Bo; Shen, Guo-fang; Fang, Bing; Sun, Liang-yan; Wu, Yong; Jiang, Ling-yong; Zhu, Min

    2012-10-01

    To investigate the changes of periodontal conditions after micro-osteotomy assisted lower incisor decompensation for skeletal Class III malocclusions with alveolar hypoplasia in the lower anterior region. The sample consisted of 22 cases diagnosed as skeletal Class III malocclusions with alveolar hypoplasia in the lower anterior region, selected from consecutive patients of Department of Oral & Cranio-maxillofacial Science of Shanghai Ninth People's Hospital during 2009-2012. The samples were divided into 2 groups; G1 comprised 10 patients who accepted micro-osteotomy assisted lower incisor decompensation; G2 comprised 12 patients who chose traditional pre-surgical decomposition. The changes of periodontal conditions of both groups were evaluated with the help of cone-beam CT(CBCT). Data was processed using SAS8.02 software package. For subjects in G1, during the micro-osteotomy assisted pre-surgical orthodontics, no significant difference was found in the amount of root resorption of lower incisors.But labial and lingual vertical alveolar bone loss were 2.60 mm and 2.22 mm; alveolar bone thickness increased by 3.05 mm on the labial side and decreased by 0.88 mm on the lingual side (Ppre-surgical orthodontics was much safer than traditional orthodontics for skeletal Class III malocclusions with alveolar hypoplasia in the lower anterior region.

  8. Assessment of pain and discomfort during early orthodontic treatment of skeletal Class III malocclusion using the Removable Mandibular Retractor Appliance.

    Science.gov (United States)

    Saleh, M; Hajeer, M Y; Al-Jundi, A

    2013-06-01

    To determine the degree of pain and discomfort during the orthodontic treatment of skeletal Class III malocclusion using the Removable Mandibular Retractor (RMR). The sample consisted of 33 skeletal Class III patients (17 males and 16 females; average age: 7.5 ± 1.33 years) who had been assigned to the RMR treatment group in a randomised controlled trial comparing this treatment versus a control group of no treatment at the Orthodontic Department, University of Al-Baath Dental School in Syria. Pain and discomfort were assessed using standardised questionnaires at the following assessment times: 7 days (T1), 14 days (T2), 6 weeks (T3), 3 months (T4) and 6 months (T5) after appliance insertion. Levels of pain and discomfort decreased gradually by time in general. No significant changes in the levels of pain, tooth sensitivity and soft tissues tension were detected, whereas a significant decrease in the levels of pressure, impaired speech, impaired swallowing and lack of confidence in public was observed two weeks following appliance insertion. Mandibular constraint feeling required three months to decrease significantly. No difference was found between males and females with regard to acceptance. The RMR is well accepted by Class III patients in the early mixed dentition.

  9. The effect of mouth breathing on dentofacial morphology of growing child

    Directory of Open Access Journals (Sweden)

    S Malhotra

    2012-01-01

    Full Text Available Backround: The oral mode of respiration cause postural adaptations of structures in the head and neck region producing the effect on the positional relationship of the jaws. Aim: The aim of this study is to verify the skeletal relationship of mouth and nose breathing child. Study design: A cross sectional study was performed to assess the association of changed mode of respiration with dentofacial growth. Materials and Methods : One hundred children among which 54 were mouth breathers and 46 were nasal breathers of 6-12 years of age were submitted to clinical examination and cephalometric radiographical analysis. Statistical analysis : Chi-square test for proportions and independent sample′s ′t′test for parametric data is used. Result: The mean values of N-Me (P<0.001 ANS-Me (P<0.001 and SN-GoGn (P<0.001 for mouth breathers is significantly higher. ArGo-GoMe (P=0.003 and (P<0.011 for 6-9 and 9-12 years age group, respectively, were significantly low in nasal breathers group. Conclusions: Changed mode of respiration was associated with increased facial height, mandibular plane angle and gonial angle.

  10. Treatment of skeletal class III malocclusion using face mask therapy with alternate rapid maxillary expansion and constriction (Alt-RAMEC protocol

    Directory of Open Access Journals (Sweden)

    Anand Ramchandra Rathi

    2015-01-01

    Full Text Available Class III malocclusion is very common malocclusion and can be due to maxillary retrusion, mandibular prognathism, or combination. Ellis and McNamara found a combination of maxillary retrusion and mandibular protrusion to be the most common skeletal relationship (30%. The treatment should be carried out as early as possible for permitting normal growth of the skeletal bases. Reverse pull head gear combined with maxillary expansion can effectively correct skeletal Class III malocclusion due to maxillary deficiency in growing patient. An eight-year-old female patient with chief complaint of prognathic mandible and anterior crossbite was successfully treated in duration of 5 months with facemask and expansion therapy based on Alternate Rapid Maxillary Expansion and Constriction (Alt-RAMEC protocol.

  11. Thin-plate spline analysis of treatment effects of rapid maxillary expansion and face mask therapy in early Class III malocclusions.

    Science.gov (United States)

    Baccetti, T; Franchi, L; McNamara, J A

    1999-06-01

    An effective morphometric method (thin-plate spline analysis) was applied to evaluate shape changes in the craniofacial configuration of a sample of 23 children with Class III malocclusions in the early mixed dentition treated with rapid maxillary expansion and face mask therapy, and compared with a sample of 17 children with untreated Class III malocclusions. Significant treatment-induced changes involved both the maxilla and the mandible. Major deformations consisted of forward displacement of the maxillary complex from the pterygoid region and of anterior morphogenetic rotation of the mandible, due to a significant upward and forward direction of growth of the mandibular condyle. Significant differences in size changes due to reduced increments in mandibular dimensions were associated with significant shape changes in the treated group.

  12. Maintenance of class III trifurcated molars versus implant placement in regenerated extraction sockets: long-term results of 2 cases.

    Science.gov (United States)

    Zafiropoulos, Gregory-George K; di Prisco, Manuela Occipite; Deli, Giorgio; Hoffmann, Oliver

    2011-03-01

    Studies to date have reached differing conclusions regarding the long-term prognosis of teeth with class III furcation involvement. Replacement of such teeth with implants could be an alternative. This report compares the treatment outcomes of 2 cases with similar disease progression: 1 treated by implant therapy and 1 maintained with nonsurgical periodontal treatment. Two patients with advanced chronic periodontitis and class III furcation involvement of all molars were treated. Case 1 received a conservative periodontal and antibiotic treatment, followed by 15 years of maintenance. In case 2, the molars were extracted and replaced with implants, and the implants were observed for 7 years. Clinical attachment level (CAL), probing attachment level (PAL), bleeding on probing, plaque index, and periodontal pathogens were recorded. Despite good compliance of case 1, periodontal pathogens were not eliminated and tissue destruction was not halted. The PAL outcomes of case 2 improved over time; mean PAL loss reached 0.35 mm/y in the first 3 years and then decreased to 0.01 mm/y. While CAL outcomes did not change in case 2, case 1 showed increased CAL loss after 8 years. Based on the limited findings of this case report, extraction of molars with class III furcation involvement and subsequent implant placement may render a better predictability of treatment outcomes than nonsurgical periodontal therapy in the cases of infection with periodontal pathogens.

  13. Compensatory orthodontic treatment of skeletal Class III malocclusion with anterior crossbite.

    Science.gov (United States)

    Valladares Neto, José

    2014-01-01

    This case report describes the orthodontic treatment of an adult patient with skeletal Class III malocclusion and anterior crossbite. A short cranial base led to difficulties in establishing a cephalometric diagnosis. The patient's main complaint comprised esthetics of his smile and difficulties in mastication. The patient did not have the maxillary first premolars and refused orthognathic surgery. Therefore, the treatment chosen was orthodontic camouflage and extraction of mandibular first premolars. For maxillary retraction, the vertical dimension was temporarily increased to avoid obstacles to orthodontic movement. At the end of the treatment, ideal overjet and overbite were achieved. Examination eight years after orthodontic treatment revealed adequate clinical stability. This case report was submitted to the Brazilian Board of Orthodontics and Facial Orthopedics (BBO) as part of the requirements to become a BBO diplomate.

  14. Systemic treatment after whole-brain radiotherapy may improve survival in RPA class II/III breast cancer patients with brain metastasis.

    Science.gov (United States)

    Zhang, Qian; Chen, Jian; Yu, Xiaoli; Ma, Jinli; Cai, Gang; Yang, Zhaozhi; Cao, Lu; Chen, Xingxing; Guo, Xiaomao; Chen, Jiayi

    2013-09-01

    Whole brain radiotherapy (WBRT) is the most widely used treatment for brain metastasis (BM), especially for patients with multiple intracranial lesions. The purpose of this study was to examine the efficacy of systemic treatments following WBRT in breast cancer patients with BM who had different clinical characteristics, based on the classification of the Radiation Therapy Oncology Group recursive partitioning analysis (RPA) and the breast cancer-specific Graded Prognostic Assessment (Breast-GPA). One hundred and one breast cancer patients with BM treated between 2006 and 2010 were analyzed. The median interval between breast cancer diagnosis and identification of BM in the triple-negative patients was shorter than in the luminal A subtype (26 vs. 36 months, respectively; P = 0.021). Univariate analysis indicated that age at BM diagnosis, Karnofsky performance status/recursive partitioning analysis (KPS/RPA) classes, number of BMs, primary tumor control, extracranial metastases and systemic treatment following WBRT were significant prognostic factors for overall survival (OS) (P RPA classes and systemic treatments following WBRT remained the significant prognostic factors for OS. For RPA class I, the median survival with and without systemic treatments following WBRT was 25 and 22 months, respectively (P = 0.819), while for RPA class II/III systemic treatments significantly improved OS from 7 and 2 months to 11 and 5 months, respectively (P RPA class II/III patients.

  15. A network approach to orthodontic diagnosis.

    Science.gov (United States)

    Auconi, P; Caldarelli, G; Scala, A; Ierardo, G; Polimeni, A

    2011-11-01

    Network analysis, a recent advancement in complexity science, enables understanding of the properties of complex biological processes characterized by the interaction, adaptive regulation, and coordination of a large number of participating components. We applied network analysis to orthodontics to detect and visualize the most interconnected clinical, radiographic, and functional data pertaining to the orofacial system. The sample consisted of 104 individuals from 7 to 13 years of age in the mixed dentition phase without previous orthodontic intervention. The subjects were divided according to skeletal class; their clinical, radiographic, and functional features were represented as vertices (nodes) and links (edges) connecting them. Class II subjects exhibited few highly connected orthodontic features (hubs), while Class III patients showed a more compact network structure characterized by strong co-occurrence of normal and abnormal clinical, functional, and radiological features. Restricting our analysis to the highest correlations, we identified critical peculiarities of Class II and Class III malocclusions. The topology of the dentofacial system obtained by network analysis could allow orthodontists to visually evaluate and anticipate the co-occurrence of auxological anomalies during individual craniofacial growth and possibly localize reactive sites for a therapeutic approach to malocclusion. © 2011 John Wiley & Sons A/S.

  16. Combined orthodontic and surgical treatment of a severe skeletal Class III malocclusion: a case report.

    Science.gov (United States)

    Nene, Salil; Gautam, Rajaganesh; Sharif, Kanaan; Gupta, Gaurav

    2012-01-01

    This report describes a combined orthodontic and surgical treatment approach for a severe skeletal Class III malocclusion in a young Indian woman with serious esthetic concerns. The case required significant surgical correction in the anteroposterior and vertical planes, involving surgeries in both the maxilla and the mandible. The case required the use of mini-implant anchorage in the presurgical phase as well as postorthodontic prosthodontic rehabilitation to replace missing posterior teeth to restore the occlusal table.

  17. A class III chitinase without disulfide bonds from the fern, Pteris ryukyuensis: crystal structure and ligand-binding studies.

    Science.gov (United States)

    Kitaoku, Yoshihito; Umemoto, Naoyuki; Ohnuma, Takayuki; Numata, Tomoyuki; Taira, Toki; Sakuda, Shohei; Fukamizo, Tamo

    2015-10-01

    We first solved the crystal structure of class III catalytic domain of a chitinase from fern (PrChiA-cat), and found a structural difference between PrChiA-cat and hevamine. PrChiA-cat was found to have reduced affinities to chitin oligosaccharides and allosamidin. Plant class III chitinases are subdivided into enzymes with three disulfide bonds and those without disulfide bonds. We here referred to the former enzymes as class IIIa chitinases and the latter as class IIIb chitinases. In this study, we solved the crystal structure of the class IIIb catalytic domain of a chitinase from the fern Pteris ryukyuensis (PrChiA-cat), and compared it with that of hevamine, a class IIIa chitinase from Hevea brasiliensis. PrChiA-cat was found to adopt an (α/β)8 fold typical of GH18 chitinases in a similar manner to that of hevamine. However, PrChiA-cat also had two large loops that extruded from the catalytic site, and the corresponding loops in hevamine were markedly smaller than those of PrChiA-cat. An HPLC analysis of the enzymatic products revealed that the mode of action of PrChiA-cat toward chitin oligosaccharides, (GlcNAc) n (n = 4-6), differed from those of hevamine and the other class IIIa chitinases. The binding affinities of (GlcNAc)3 and (GlcNAc)4 toward the inactive mutant of PrChiA-cat were determined by isothermal titration calorimetry, and were markedly lower than those toward other members of the GH18 family. The affinity and the inhibitory activity of allosamidin toward PrChiA-cat were also lower than those toward the GH18 chitinases investigated to date. Several hydrogen bonds found in the crystal structure of hevamine-allosamidin complex were missing in the modeled structure of PrChiA-cat-allosamidin complex. The structural findings for PrChiA-cat successfully interpreted the functional data presented.

  18. Compensatory orthodontic treatment of skeletal Class III malocclusion with anterior crossbite

    Directory of Open Access Journals (Sweden)

    José Valladares Neto

    2014-01-01

    Full Text Available INTRODUCTION: This case report describes the orthodontic treatment of an adult patient with skeletal Class III malocclusion and anterior crossbite. A short cranial base led to difficulties in establishing a cephalometric diagnosis. The patient's main complaint comprised esthetics of his smile and difficulties in mastication. METHODS: The patient did not have the maxillary first premolars and refused orthognathic surgery. Therefore, the treatment chosen was orthodontic camouflage and extraction of mandibular first premolars. For maxillary retraction, the vertical dimension was temporarily increased to avoid obstacles to orthodontic movement. RESULTS: At the end of the treatment, ideal overjet and overbite were achieved. CONCLUSION: Examination eight years after orthodontic treatment revealed adequate clinical stability. This case report was submitted to the Brazilian Board of Orthodontics and Facial Orthopedics (BBO as part of the requirements to become a BBO diplomate.

  19. Treatment of Class III malocclusion in a young adult patient: a case report.

    Science.gov (United States)

    Kiran, B H Jyothi; Kumar, Prashanth; Ravi, S; Shivalinga, B M; Bhagyalaxmi; Pradeep; Kudagi, Vishal

    2012-01-01

    This article describes the treatment of a young adult male with a concave profile, skeletal class III malocclusion because of a prognathic mandible and proclined upper incisors. The therapy included stages: 1. Pre-surgical orthodontics involving leveling and aligning of upper and lower arches, protraction of lower molars and retraction of upper incisors; 2. Surgical phase involving BSSO with mandibular setback and 3. Post-surgical orthodontics for finishing and detailing. The treatment lasted 23 months and improved facial esthetics significantly The treatment resulted in a functional occlusion with a lack of lateral cuspid guidance that could be accepted considering the difficulty of the case. Over jet and overbite are within norms.

  20. Mandibular cervical headgear vs rapid maxillary expander and facemask for orthopedic treatment of Class III malocclusion.

    Science.gov (United States)

    Baccetti, Tiziano; Rey, Diego; Angel, David; Oberti, Giovanni; McNamara, James A

    2007-07-01

    To compare the effectiveness of the rapid maxillary expander and facemask (RME/ FM) and mandibular cervical headgear (MCH) protocols when followed by fixed appliances and evaluated at a postpubertal observation in patients with dentoskeletal Class III malocclusion. The sample treated with the RME/FM followed by fixed appliances included 32 patients (12 boys and 20 girls). The sample treated with the MCH followed by fixed appliances included 26 patients (eight boys and 18 girls). Cephalometric analysis was performed at T(1) (before treatment) and T(2) (after the first phase of orthopedic therapy and the second phase of fixed appliances). T(1)-T(2) changes were evaluated by means of t-tests. Midfacial length, mandibular length, and the sagittal position of the chin all showed significantly smaller increases in the MCH group than in the RME/FM group. The amount of increase in the overjet was also significantly smaller in the MCH group, whereas the amount of molar correction was greater. The upper incisors were significantly less proclined and the lower incisors were significantly less retroclined in the MCH group when compared with the RME/FM group. RME/FM therapy appears to be indicated in Class III patients with a component of maxillary retrusion, whereas MCH therapy is preferable in patients with mandibular prognathism.

  1. Orthognathic Surgery for the Correction of Severe Skeletal Class III Malocclusion.

    Science.gov (United States)

    Kafle, D; Upadhayaya, C; Chaurasia, N; Agarwal, A

    2016-01-01

    Skeletal Malocclusions results from the abnormal position of maxilla and mandible in relation with cranial base. These types of malocclusion are commonly treated by orthodontic teeth movement known as camouflage orthodontics. However severe skeletal malocclusions cannot be treated by orthodontics alone. Such cases need surgical intervention to align the position of the jaw along with orthodontic correction. This procedure is commonly known as Orthognathic Surgery. Orthognathic Surgery dates back to early eighteenth century but became popular on mid twentieth century. Though the prevalence of skeletal malocclusion is more than 1% the treatment facility was not available in Nepal till 2012. Here we present a case of Skeletal Class III malocclusion treated at Dhulikhel Hospital, Kathmandu University Hospital. For this case, double jaw surgery was performed by le-Fort I osteotomy and Bilateral Sagital Split Osteotomy. Orthognathic surgery has been routinely performed at this centre since then.

  2. Skeletal class III malocclusion treated using a non-surgical approach supplemented with mini-implants: a case report.

    Science.gov (United States)

    Farret, Marcel Marchiori; Benitez Farret, Milton M

    2013-09-01

    We describe a 28-year-old man who sought orthodontic treatment complaining about the esthetics of his smile and difficulties associated with masticatory function. The patient had a straight facial profile, skeletal and dental class III relationship, anterior open bite and posterior crossbite. He refused orthognathic surgery and was therefore treated with camouflage orthodontics supplemented with the placement of one mini-implant in each side of the mandible to facilitate movement of the lower dentition distally, tooth-by-tooth. At the end of treatment, a class I molar relationship was obtained, with an ideal overjet and overbite and excellent intercuspation. Furthermore, the open bite and crossbite were corrected. Analysis 2 years after treatment revealed good stability of treatment outcome.

  3. Tratamento da má oclusão de Classe II, divisão 1 de Angle, com protrusão maxilar utilizando-se recursos ortopédicos Class II, division 1, with maxillar protrusion's treatment employing orthopedic approachs

    Directory of Open Access Journals (Sweden)

    Carla Maria Melleiro Gimenez

    2007-12-01

    Full Text Available OBJETIVO: o presente trabalho tem o propósito de apresentar uma revisão da literatura acerca do tratamento da má oclusão de Classe II, divisão 1 de Angle, tendo a protrusão maxilar como o principal componente dessa má oclusão, durante a fase de crescimento e desenvolvimento craniofacial. Serão apresentadas as características de cada um desses aparelhos, os seus componentes, a forma adequada de utilização, os seus mecanismos de ação e, principalmente, os seus efeitos em todo o complexo dentofacial. CONCLUSÃO: nos casos em que se verifica apenas a protrusão maxilar, sem envolvimento mandibular, e se faz necessário o controle vertical, pode ser indicado o AEB, conjugado ao aparelho removível derivado do aparelho preconizado por Thurow. Já nas situações de combinação da protrusão maxilar com a retrusão mandibular, uma opção de tratamento é o ativador combinado à ancoragem extrabucal.AIM: The purpose of this research is to review the literature about the treatment of Class II, division 1 malocclusion with maxillary protrusion, during the growth and development period. This review addresses the characteristics of these appliances, their components, correct use, action mechanisms, and mainly their consequences in dentofacial complex. CONCLUSIONS: In patients with maxillary protrusion and with no mandibular component, it may be indicated the use of a maxillary splint similar to the one suggested by Thurow. However, in patients with maxillary protrusion and mandibular retrusion, it may be indicated an activator associated with extra oral anchorage.

  4. Regulation of the Tumor-Suppressor Function of the Class III Phosphatidylinositol 3-Kinase Complex by Ubiquitin and SUMO

    Energy Technology Data Exchange (ETDEWEB)

    Reidick, Christina [Biochemie Intrazellulärer Transportprozesse, Ruhr-Universität Bochum, Bochum 44801 (Germany); El Magraoui, Fouzi; Meyer, Helmut E. [Biomedical Research, Human Brain Proteomics II, Leibniz-Institut für Analytische Wissenschaften-ISAS, Dortmund 44139 (Germany); Stenmark, Harald [Department of Biochemistry, Institute for Cancer Research, Oslo University Hospital, Montebello, Oslo 0310 (Norway); Platta, Harald W., E-mail: harald.platta@rub.de [Biochemie Intrazellulärer Transportprozesse, Ruhr-Universität Bochum, Bochum 44801 (Germany)

    2014-12-23

    The occurrence of cancer is often associated with a dysfunction in one of the three central membrane-involution processes—autophagy, endocytosis or cytokinesis. Interestingly, all three pathways are controlled by the same central signaling module: the class III phosphatidylinositol 3-kinase (PI3K-III) complex and its catalytic product, the phosphorylated lipid phosphatidylinositol 3-phosphate (PtdIns3P). The activity of the catalytic subunit of the PI3K-III complex, the lipid-kinase VPS34, requires the presence of the membrane-targeting factor VPS15 as well as the adaptor protein Beclin 1. Furthermore, a growing list of regulatory proteins associates with VPS34 via Beclin 1. These accessory factors define distinct subunit compositions and thereby guide the PI3K-III complex to its different cellular and physiological roles. Here we discuss the regulation of the PI3K-III complex components by ubiquitination and SUMOylation. Especially Beclin 1 has emerged as a highly regulated protein, which can be modified with Lys11-, Lys48- or Lys63-linked polyubiquitin chains catalyzed by distinct E3 ligases from the RING-, HECT-, RBR- or Cullin-type. We also point out other cross-links of these ligases with autophagy in order to discuss how these data might be merged into a general concept.

  5. Regulation of the Tumor-Suppressor Function of the Class III Phosphatidylinositol 3-Kinase Complex by Ubiquitin and SUMO

    International Nuclear Information System (INIS)

    Reidick, Christina; El Magraoui, Fouzi; Meyer, Helmut E.; Stenmark, Harald; Platta, Harald W.

    2014-01-01

    The occurrence of cancer is often associated with a dysfunction in one of the three central membrane-involution processes—autophagy, endocytosis or cytokinesis. Interestingly, all three pathways are controlled by the same central signaling module: the class III phosphatidylinositol 3-kinase (PI3K-III) complex and its catalytic product, the phosphorylated lipid phosphatidylinositol 3-phosphate (PtdIns3P). The activity of the catalytic subunit of the PI3K-III complex, the lipid-kinase VPS34, requires the presence of the membrane-targeting factor VPS15 as well as the adaptor protein Beclin 1. Furthermore, a growing list of regulatory proteins associates with VPS34 via Beclin 1. These accessory factors define distinct subunit compositions and thereby guide the PI3K-III complex to its different cellular and physiological roles. Here we discuss the regulation of the PI3K-III complex components by ubiquitination and SUMOylation. Especially Beclin 1 has emerged as a highly regulated protein, which can be modified with Lys11-, Lys48- or Lys63-linked polyubiquitin chains catalyzed by distinct E3 ligases from the RING-, HECT-, RBR- or Cullin-type. We also point out other cross-links of these ligases with autophagy in order to discuss how these data might be merged into a general concept

  6. Perawatan Maloklusi Pseudo Kelas III dengan Alat Ortodontik Cekat Teknik Begg

    Directory of Open Access Journals (Sweden)

    Robertus Meidiyanto

    2016-10-01

    Full Text Available Latar Belakang: Maloklusi Pseudo kelas III ditandai dengan hubungan yang tidak harmonis antara relasi anteroposterior rahang dan posisi mandibula terhadap maksila. Ketidakharmonisan tersebut dapat disebabkan karena mandibula yang normal dengan maksila retrusif. Maloklusi pseudo kelas III mempunyai perhitungan yang menunjukkan bentuk antara klas I dan skeletal klas III. Perbedaanya hanya pada sudut gonial dimana pada skeletal klas III sudutnya lebih tumpul, sedangkan pada sampel pseudo klas III, sudut gonial lebih mirip dengan klas I. Perawatan ortodontik dengan alat cekat teknik Begg dapat juga untuk merawat maloklusi Angle kelas III, termasuk maloklusi skeletal yang menyertainya. Tujuan: memaparkan perubahan dental dan skeletal setelah perawatan dengan alat cekat teknik Begg. Kasus: perempuan 20 tahun mengeluhkan gigi-gigi rahang atas ada yang tumbuh di belakang dan rahang bawah nyakil sehingga menganggu penampilan dan mengurangi rasa percaya diri. Diagnosis: Maloklusi Angle Klas III subdivisi serta hubungan skeletal klas III dengan maksila retrusif dan mandibula protusif disertai Crossbite: 12, 11, 21, 22 terhadap 34, 32,31, 41, 42, 43. Perawatan: menggunakan alat cekat teknik Begg tanpa pencabutan. Kesimpulan: Hasil menunjukkan crowded terkoreksi, overjet dan overbite terkoreksi, relasi molar menjadi klas I.   Background: Pseudo class III malocclusion characterized by disharmony between anteroposterior relationship of jaw and mandibulae position toward maxilla. This disharmony cause by normally shaped mandibles and underveloped maxillae. Pseudo clas III malocclusion is an intermediate form between class I and skeletal clas III malocclusion. The only exception was the gonial angle, which was generally more obtuse in the skeletal class III sample. Measurement of gonial angle in the pseudo class III sample was found to be rather similar to class I sample. Fixed Begg orthodontic appliance can be used to treat Angle’s class III malocclusion

  7. [Evaluation of the correction of the skeletal class III malocclusion by distalization of the whole mandible dentition with micro-implant anchorage].

    Science.gov (United States)

    2017-06-18

    To evaluate the clinical effect of distalizing mandibular dentition with micro-implant in patients with skeletal class III malocclusion. In the study, 20 patients with skeletal class IIImalocclusion were selected. They are consist of 8 males and 12 female with an age range from 16 to 38 years old and an average age of (21.5±5.6) years.They were treated with straight wire technique and the implant were inserted into the mandibular external oblique line to distlize the lower dentition to a class I molar relationships. Cephalometrics films were taken before and after treatment. The changes of hard tissue and soft tissue were analyzed by evaluating 26 measurement measurements. Class I molar relationships were achieved, and the profile were improved after treatment. ANB increased by (0.80±1.02) °,Wits increased by (1.67±1.74) mm,after treatment (Plower dentition were significantly retracted after treatment with L1-NB distance decreased by(2.64±1.50) mm, Plower first molars were retracted by (3.26±1.95) mm and (0.79±1.27) mm respectively (Plower second molars were retracted by (3.06±1.80) mm (Plower lip to esthetic plane were decreased by (1.70±1.59) mm on average (Pclass III malocclusion, the lower teeth were retracted by controlled tipping movement.

  8. Strategic camouflage treatment of skeletal Class III malocclusion (mandibular prognathism) using bone-borne rapid maxillary expansion and mandibular anterior subapical osteotomy.

    Science.gov (United States)

    Seo, Yu-Jin; Lin, Lu; Kim, Seong-Hun; Chung, Kyu-Rhim; Nelson, Gerald

    2016-01-01

    This case report presents the camouflage treatment that successfully improved the facial profile of a patient with a skeletal Class III malocclusion using bone-borne rapid maxillary expansion and mandibular anterior subapical osteotomy. The patient was an 18-year-old woman with chief complaints of crooked teeth and a protruded jaw. Camouflage treatment was chosen because she rejected orthognathic surgery under general anesthesia. A hybrid type of bone-borne rapid maxillary expander with palatal mini-implants was used to correct the transverse discrepancy, and a mandibular anterior subapical osteotomy was conducted to achieve proper overjet with normal incisal inclination and to improve her lip and chin profile. As a result, a Class I occlusion with a favorable inclination of the anterior teeth and a good esthetic profile was achieved with no adverse effects. Therefore, the hybrid type of bone-borne rapid maxillary expander and a mandibular anterior subapical osteotomy can be considered effective camouflage treatment of a skeletal Class III malocclusion, providing improved inclination of the dentition and lip profile. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

  9. Changes in anteroposterior position and inclination of the maxillary incisors after surgical-orthodontic treatment of skeletal class III malocclusions.

    Science.gov (United States)

    Zou, Bingshuang; Zhou, Yang; Lowe, Alan A; Li, Huiqi; Pliska, Benjamin

    2015-12-01

    The purpose of this study was to evaluate and compare the anteroposterior (AP) position and inclination of the maxillary incisors in subjects with class I normal occlusion and a harmonious profile with patients with skeletal class III malocclusions, and to investigate the changes in maxillary incisor inclination and AP position after surgical-orthodontic treatment in class III patients. Sixty-five subjects (35 female and 30 male; mean age: 21.8 ± 3.89 years) with normal profiles and class I skeletal and dental patterns were selected as a control sample. Sixty-seven patients (38 female and 29 male; mean age: 21.3 ± 3.31 years) with skeletal and dental class III malocclusions who sought surgical-orthodontic treatment were used as the study sample. Subjects were asked to smile and profile photographs were taken with the head in a natural position and the maxillary central incisors and the forehead in full view; cephalograms were taken and superimposed on the profile pictures according to the outline of the forehead and nose. Forehead inclination, maxillary incisor facial inclination and the AP position of the maxillary central incisor relative to the forehead (FAFFA) were measured on the integrated images and statistical analyses were performed. In both groups, there were no significant male/female differences in either the maxillary central incisor inclination or AP position. Female subjects had a significantly steeper forehead inclination compared with males (P 0.05). In the control group, 84.6% had the facial axial point (FA) of their maxillary central incisors positioned between lines through the forehead facial axis (FFA) point and the glabella. In the study group, however, 79.1% had the maxillary central incisors positioned posterior to the line through the FFA point and the difference with the control group was statistically significant (P 0.05). With the integrated radiograph-photograph method, the lateral cephalogram was reoriented, which makes it possible

  10. [Preliminary evaluation on 3-demension changes of facial soft tissue with structure light scanning technique before and after orthognathic surgery of Class III deformities].

    Science.gov (United States)

    Peng, Ju-xiang; Jiang, Jiu-hui; Zhao, Yi-jiao; Wang, Yong; Li, Ze; Wang, Ning-ning; Feng, Zhi-min

    2015-02-18

    To evaluate facial soft tissue 3-deminsion changes of skeletal Class III malocclusion patients after orthognathic surgery using structure light scanning technique. Eight patients [3 males and 5 females, aged (27.08 ± 4.42) years] with Class III dentoskeletal relationship who underwent a bimaxillary orthognathic surgical procedure involving advancement of the maxilla by Le Fort I osteotomy and mandibular setback by bilateral sagittal split ramus osteotomy (BSSO) and genioplasty to correct deformity were included. 3D facial images were obtained by structure light scanner for all the patients 2 weeks preoperatively and 6 months postoperatively. The facial soft tissue changes were evaluated in 3-dimension. The linear distances and angulation changes for facial soft tissue landmarks were analyzed. The soft tissue volumetric changes were assessed too. There were significant differences in the sagittal and vertical changes of soft tissue landmarks. The greatest amount of soft tissue change was close to lips. There were more volumetric changes in the chin than in the maxilla, and fewer in the forehead. After biomaxillary surgery, there were significant facial soft tissue differences mainly in the sagittal and vertical dimension for skeletal Class III patients. The structure light 3D scanning technique can be accurately used to estimate the soft tissue changes in patients who undergo orthognathic surgery.

  11. Treatment outcome of bimaxillary surgery for asymmetric skeletal class II deformity.

    Science.gov (United States)

    Chen, Yun-Fang; Liao, Yu-Fang; Chen, Yin-An; Chen, Yu-Ray

    2018-05-04

    Facial asymmetry is one of the main concerns in patients with a dentofacial deformity. The aims of the study were to (1) evaluate the changes in facial asymmetry after bimaxillary surgery for asymmetric skeletal class II deformity and (2) compare preoperative and postoperative facial asymmetry of class II patients with normal controls. The facial asymmetry was assessed for 30 adults (21 women and 9 men, mean age: 29.3 years) who consecutively underwent bimaxillary surgery for asymmetric skeletal class II deformity using cone-beam computed tomography before and at least 6 months after surgery. Thirty soft tissue and two dental landmarks were identified on each three-dimensional facial image, and the asymmetry index of each landmark was calculated. Results were compared with those of 30 normal control subjects (21 women and 9 men, mean age: 26.2 years) with skeletal class I structure. Six months after surgery, the asymmetric index of the lower face and total face decreased significantly (17.8 ± 29.4 and 16.6 ± 29.5 mm, respectively, both p class II patients had residual chin asymmetry. The postoperative total face asymmetric index was positively correlated with the preoperative asymmetric index (r = 0.37, p class II deformity resulted in a significant improvement in lower face asymmetry. However, approximately 50% of the patients still had residual chin asymmetry. The total face postoperative asymmetry was moderately related to the initial severity of asymmetry. These findings could help clinicians better understand orthognathic outcomes on different facial regions for patients with asymmetric class II deformity.

  12. Lip line changes in Class III facial asymmetry patients after orthodontic camouflage treatment, one-jaw surgery, and two-jaw surgery: A preliminary study.

    Science.gov (United States)

    Lee, Gung-Chol; Yoo, Jo-Kwang; Kim, Seong-Hun; Moon, Cheol-Hyun

    2017-03-01

    To evaluate the effects of orthodontic camouflage treatment (OCT), one-jaw surgery, and two-jaw surgery on the correction of lip line cant (LLC) and to examine factors affecting the correction of LLC in Class III craniofacial asymmetry patients. A sample of 30 Class III craniofacial asymmetry patients was divided into OCT (n = 10), one-jaw surgery (n = 10), and two-jaw surgery (n = 10) groups such that the pretreatment LLC was similar in each group. Pretreatment and posttreatment cone-beam computed tomography scans were used to measure dental and skeletal parameters and LLC. Pretreatment and posttreatment measurements were compared within groups and between groups. Pearson's correlation tests and multiple regression analyses were performed to investigate factors affecting the amount and rate of LLC correction. The average LLC correction was 1.00° in the one-jaw surgery group, and in the two-jaw surgery group, it was 1.71°. In the OCT group it was -0.04°, which differed statistically significantly from the LLC correction in the other two groups. The amount and rate of LLC correction could be explained by settling of skeletal discrepancies or LLC at pretreatment with goodness of fit percentages of approximately 82% and 41%, respectively. Orthognathic surgery resulted in significant correction of LLC in Class III craniofacial asymmetry patients, while OCT did not.

  13. Evaluation of cephalometric changes in patients with class III malocclusion in mixed dentition period following face mask therapy and slow maxillary expansion

    Directory of Open Access Journals (Sweden)

    Ahmad Akhondi MS.

    2008-11-01

    Full Text Available "nBackground and Aim: Among different treatments of patients with Class III malocclusion , orthopedic protraction of maxilla has been known as an effective method in mixed dentition period. The aim of this study was to evaluate the cephalometric changes of Cl III patients in mixed dentition period following face mask therapy and slow maxillary expansion. "nMaterials and Methods: This was a before-after study which was conducted on 10 children in mixed dentition period, who had class III malocclusion and maxillary deficiency according to the Stiener and Mc Namara's analysis. The patients were all treated by protraction face mask and slow maxillary expansion. The cephalometric changes of maxilla , mandible and dental relations during the treatment were analyzed by Paired sample T Test. P<0.05 was considered as the level of significant. "nResults: The overjet increasement was 1.7mm. Co. ANS distance improvement was 5.6mm, Ptm.ANS distance increasing was 3mm, and ultimately improvement of Gf.s distance was 1.5mm which were all statistically significant (p<0.05. "nConclusion: Based on the results of this study, face mask therapy with slow maxillary expansion is able to improve the horizotal position of maxilla, in patients with Cl III malocclusion , in mixed dentition period.

  14. Miniscrew-assisted mandibular molar distalization in a patient with skeletal class-III malocclusion: A clinical case report

    OpenAIRE

    Seyed Mohammadreza Safavi; Farnaz Younessian; Sarvraj Kohli

    2013-01-01

    In nongrowing patients with mild skeletal Class-III malocclusion, premolar extraction or molar distalization in the lower arch can be done as a part of camouflage treatment. Temporary anchorage devices are widely used for this purpose because they do not produce undesirable reciprocal effects and do not depend on the patient′s cooperation. However, most reported cases in this regard have used interradicular miniscrews in the mandibular arch and these have a risk of failure as they can loosen ...

  15. Professionals' and laypersons' appreciation of various options for Class III surgical correction.

    Science.gov (United States)

    Fabré, M; Mossaz, C; Christou, P; Kiliaridis, S

    2010-08-01

    The objectives of this study were to evaluate the assessments of maxillofacial surgeons, orthodontists, and laypersons on the predicted aesthetic outcome of various surgical options in Class III correction and the associations between certain initial cephalometric values and the judges' preferred option. Pre-surgical lateral headfilms and coloured profile photographs of 18 skeletal Class III Caucasian adult patients (10 males and 8 females) with a mean age of 24.5 years were used. The headfilms were hand traced and digitized. Conventional cephalometric analysis was performed. Computerized predictions of three surgical options, mandibular setback, Le Fort I advancement, and bimaxillary surgery, were made. For each case, the pre-surgical profile photograph with the three predictions was presented on a printed page. The questionnaire was sent to 51 maxillofacial surgeons (response rate 45.1 per cent), 78 orthodontists (response rate 71.8 per cent), and 61 laypersons (response rate 100 per cent) to aesthetically evaluate the pre-surgical photographs and the surgical predictions by placing a mark along a 10-graded visual analogue scale (VAS) using a standard profile for calibration. Confidence interval was calculated for each patient. An independent samples t-test was used to detect initial cephalometric values associated with the judges' preferred option and analysis of variance/Tukey's honestly significant differences to evaluate differences between judges. Intra-observer reliability was assessed with a paired t-test. All treatment predictions led to improved scoring of facial aesthetics with the exception of the setback option for three patients. For 14 patients, general agreement for the preferred option existed between the three groups of judges. Laypersons tended to give lower improvement scores than professionals. Overjet, nasofacial, and nasomental angles were important in decision making between the mandibular setback and Le Fort I options (the more negative

  16. Orthodontic correction of Class III malocclusion in a young patient with the use of a simple fixed appliance.

    Science.gov (United States)

    Park, Jae Hyun

    2012-01-01

    Anterior crossbites are one of the most common orthodontic problems we observe in growing children. The first step in treating an anterior crossbite is to determine whether the crossbite is dental or skeletal in nature. To determine a precise diagnosis, a thorough clinical, radiographic and model analysis is required. This article shows the treatment of Class III malocclusion by correcting anterior dental crossbite with the use of a simple fixed appliance.

  17. IBO Case Report: Management of Skeletal Class III Malocclusion with Combined Rapid Maxillary Expansion: Facemask Therapy and 5-Year Follow-up

    Directory of Open Access Journals (Sweden)

    Ashok Surana

    2012-01-01

    Full Text Available This case report describes the management of skeletal Class III malocclusion with maxillary deficiency in an adolescent girl, using combined rapid maxillary expansion-facemask approach, followed by comprehensive fixed appliance mechanotherapy. Excellent long-term stability is demonstrated up to 5 years post-treatment.

  18. Skeletal changes, dental and face of class III skeletal malocclusion treated with philosophy MEAW (Multiloop Edgewise Arch Wire: a descriptive retrospective

    Directory of Open Access Journals (Sweden)

    Ángela Anyur García Bernal

    2013-07-01

    Plano (PP increase of 114,3°a 115,4° and the occlusal plane inclination increased from 17,8°a 24,7°. The average treatment time was 19,4 months. Conclusions: MEAW philosophy is a therapeutic alternative camouflage in the treatment of skeletal Class III malocclusions.

  19. Mechanistic investigation of food effect on disintegration and dissolution of BCS class III compound solid formulations: the importance of viscosity.

    Science.gov (United States)

    Radwan, Asma; Amidon, Gordon L; Langguth, Peter

    2012-10-01

    A negative food effect, i.e. a decrease in bioavailability upon the co-administration of compounds together with food, has been attributed particularly with high solubility/low permeability compounds (BCS class III). Different mechanisms have been proposed including intestinal dilution leading to a lower concentration gradient across the intestinal wall as well as binding of the active pharmaceutical ingredient to food components in the intestine and thereby decreasing the fraction of the dose available for absorption. These mechanisms refer primarily to the compound and not to the dosage form. An increase in viscosity of the dissolution fluid will in particular affect the absorption of BCS type III compounds with preferential absorption in the upper small intestine if the API release is delayed from the dosage form. The present study demonstrated that the increase in viscosity of the dissolution medium, following ingestion of a solid meal, may drastically reduce disintegration and dissolution. For that purpose the viscosity of the standard FDA meal was determined and simulated by solutions of HPMC in buffer. As model formulations, three commercially available tablets containing trospium chloride, a BCS class III m-cholinoreceptor antagonist was used. Trospium chloride drug products have been described to undergo a negative food effect of more than 80% following ingestion with food. The tablets showed prolonged disintegration times and reduced dissolution rates in viscous media, which could be attributed to changes in the liquid penetration rates. The effect was particularly significant for film-coated tablets relative to uncoated dosage forms. The results show the necessity of considering media viscosity when designing in vitro models of drug release for BCS type III drug formulations. Copyright © 2012 John Wiley & Sons, Ltd.

  20. The effect of orthognathic surgery on the lip lines while smiling in skeletal class III patients with facial asymmetry.

    Science.gov (United States)

    Kang, Sang-Hoon; Kim, Moon-Key; An, Sang-In; Lee, Ji-Yeon

    2016-12-01

    The aim of this study was to examine the relationship between improvements in lip asymmetry at rest and while smiling after orthognathic surgery in patients with skeletal class III malocclusion. This study included 21 patients with skeletal class III malocclusion and facial asymmetry. We used preoperative and postoperative CT data and photographs to measure the vertical distance of the lips when smiling. The photographs were calibrated based on these distances and the CT image. We compared preoperative and postoperative results with the t test and correlations between measurements at rest and when smiling by regression analyses. There were significant correlations between the postoperative changes in canting of the mouth corners at rest, canting of the canines, canting of the first molars, the slope of the line connecting the canines, and the slope of the line connecting first molars. The magnitude of the postoperative lip line improvement while smiling was not significantly correlated with changes in the canting and slopes of the canines, molars, and lip lines at rest. It remains difficult to predict lip line changes while smiling compared with at rest after orthognathic surgery in patients with mandibular prognathism, accompanied by facial asymmetry.

  1. Class III malocclusion with complex problems of lateral open bite and severe crowding successfully treated with miniscrew anchorage and lingual orthodontic brackets.

    Science.gov (United States)

    Yanagita, Takeshi; Kuroda, Shingo; Takano-Yamamoto, Teruko; Yamashiro, Takashi

    2011-05-01

    In this article, we report the successful use of miniscrews in a patient with an Angle Class III malocclusion, lateral open bite, midline deviation, and severe crowding. Simultaneously resolving such problems with conventional Class III treatment is difficult. In this case, the treatment procedure was even more challenging because the patient preferred to have lingual brackets on the maxillary teeth. As a result, miniscrews were used to facilitate significant asymmetric tooth movement in the posterior and downward directions; this contributed to the camouflage of the skeletal mandibular protrusion together with complete resolution of the severe crowding and lateral open bite. Analysis of the jaw motion showed that irregularities in chewing movement were also resolved, and a stable occlusion was achieved. Improvements in the facial profile and dental arches remained stable at the 18-month follow-up. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

  2. Combined Orthodontic and Surgical Approach in the Correction of a Class III Skeletal Malocclusion with Mandibular Prognathism and Vertical Maxillary Excess Using Bimaxillary Osteotomy.

    Science.gov (United States)

    Jose Cherackal, George; Thomas, Eapen; Prathap, Akhilesh

    2013-01-01

    For patients whose orthodontic problems are so severe that neither growth modification nor camouflage offers a solution, surgery to realign the jaws or reposition dentoalveolar segments is the only possible treatment. Surgery is not a substitute for orthodontics in these patients. Instead, it must be properly coordinated with orthodontics and other dental treatments to achieve good overall results. Dramatic progress in recent years has made it possible for combined surgical orthodontic treatment to be carried out successfully for patients with a severe dentofacial problem of any type. This case report provides an overview of the current treatment methodology in managing a combination of asymmetrical mandibular prognathism and vertical maxillary excess.

  3. Substrate specificity determinants of class III nucleotidyl cyclases.

    Science.gov (United States)

    Bharambe, Nikhil G; Barathy, Deivanayaga V; Syed, Wajeed; Visweswariah, Sandhya S; Colaςo, Melwin; Misquith, Sandra; Suguna, Kaza

    2016-10-01

    The two second messengers in signalling, cyclic AMP and cyclic GMP, are produced by adenylyl and guanylyl cyclases respectively. Recognition and discrimination of the substrates ATP and GTP by the nucleotidyl cyclases are vital in these reactions. Various apo-, substrate- or inhibitor-bound forms of adenylyl cyclase (AC) structures from transmembrane and soluble ACs have revealed the catalytic mechanism of ATP cyclization reaction. Previously reported structures of guanylyl cyclases represent ligand-free forms and inactive open states of the enzymes and thus do not provide information regarding the exact mode of substrate binding. The structures we present here of the cyclase homology domain of a class III AC from Mycobacterium avium (Ma1120) and its mutant in complex with ATP and GTP in the presence of calcium ion, provide the structural basis for substrate selection by the nucleotidyl cyclases at the atomic level. Precise nature of the enzyme-substrate interactions, novel modes of substrate binding and the ability of the binding pocket to accommodate diverse conformations of the substrates have been revealed by the present crystallographic analysis. This is the first report to provide structures of both the nucleotide substrates bound to a nucleotidyl cyclase. Coordinates and structure factors have been deposited in the Protein Data Bank with accession numbers: 5D15 (Ma1120 CHD +ATP.Ca 2+ ), 5D0E (Ma1120 CHD +GTP.Ca 2+ ), 5D0H (Ma1120 CHD (KDA→EGY)+ATP.Ca 2+ ), 5D0G (Ma1120 CHD (KDA→EGY)+GTP.Ca 2+ ). Adenylyl cyclase (EC number: 4.6.1.1). © 2016 Federation of European Biochemical Societies.

  4. Efeito da expansão palatina sobre o processo pterigoide, sincondrose esfeno-occipital e sela turca em crânios com relação esquelética classe II e classe III pela análise de elementos finitos (AEF) = Effect of the palatal expansion on the pterygoid process, spheno-occipital synchondrosis and sella turcica in skulls with class II and class III skeletal relationship by finite element analysis (FEA)

    OpenAIRE

    Manuel Gustavo Chávez Sevillano

    2015-01-01

    Resumo: A Técnica de Expansão Palatina é usada frequentemente para corrigir a mordida cruzada posterior, atresia transversal maxilar e aumentar o perímetro da arcada dentária. O objetivo deste estudo foi avaliar pela análise de elementos finitos o efeito simulado da expansão palatina sobre o processo pterigoide, sincondrose esfeno-occipital e sela turca em dois crânios com relação esquelética tipo Classe II e Classe III, identificando a distribuição das tensões mecânicas nessas estruturas ana...

  5. Association between study design and citation counts of articles published in the American Journal of Orthodontics and Dentofacial Orthopedics and Angle Orthodontist.

    Science.gov (United States)

    Allareddy, Veerasathpurush; Lee, Min Kyeong; Shah, Andrea; Elangovan, Satheesh; Lin, Chin-Yu

    2012-01-01

    The scientific community views meta-analyses and systematic reviews, in addition to well-designed randomized controlled clinical trials, as the highest echelon in the continuum of hierarchy of evidence. The objective of this study was to examine the association between different study designs and citation counts of articles published in the American Journal of Orthodontics and Dentofacial Orthopedics and Angle Orthodontist. All articles, excluding editorial comments, letters to the editor, commentaries, and special articles, that were published in the American Journal of Orthodontics and Dentofacial Orthopedics and Angle Orthodontist during the years 2004 and 2005 were examined in this study. The number of times an article was cited in the first 24 months after its publication was computed. The PubMed database was used to index the study design of the articles. The association between study design and citation counts was examined using the Kruskal-Wallis test. A multivariable negative binomial regression model was used to examine the association between citation count and study design along with several other confounding variables. A total of 624 articles were selected for analysis. Of these, there were 25 meta-analyses or review articles, 42 randomized clinical trials, 59 clinical trials, 48 animal studies, 64 case reports, and 386 quasiexperimental/miscellaneous study designs. The mean ± SD citation count was 1.04 ± 1.46. Nearly half of the articles (n = 311) were not cited even once during the observation period. Case reports were cited less frequently than meta-analyses or reviews (incident risk ratio, 0.37; 95% confidence interval, 0.19 to 0.72; P = .003), even after adjusting for other independent variables. Among various study designs, meta-analyses and review articles are more likely to be cited in the first 24 months after publication. This study demonstrates the importance of publishing more meta-analyses and review articles for quicker dissemination of

  6. Combined Orthodontic and Surgical Approach in the Correction of a Class III Skeletal Malocclusion with Mandibular Prognathism and Vertical Maxillary Excess Using Bimaxillary Osteotomy

    Directory of Open Access Journals (Sweden)

    George Jose Cherackal

    2013-01-01

    Full Text Available For patients whose orthodontic problems are so severe that neither growth modification nor camouflage offers a solution, surgery to realign the jaws or reposition dentoalveolar segments is the only possible treatment. Surgery is not a substitute for orthodontics in these patients. Instead, it must be properly coordinated with orthodontics and other dental treatments to achieve good overall results. Dramatic progress in recent years has made it possible for combined surgical orthodontic treatment to be carried out successfully for patients with a severe dentofacial problem of any type. This case report provides an overview of the current treatment methodology in managing a combination of asymmetrical mandibular prognathism and vertical maxillary excess.

  7. Novel three dimensional position analysis of the mandibular foramen in patients with skeletal class III mandibular prognathism

    International Nuclear Information System (INIS)

    Kang, Sang Hoon; Kim, Yeon Ho; Won, Yu Jin; Kim, Moon Key

    2016-01-01

    To analyze the relative position of the mandibular foramina (MnFs) in patients diagnosed with skeletal class III malocclusion. Computed tomography (CT) images were collected from 85 patients. The vertical lengths of each anatomic point from the five horizontal planes passing through the MnF were measured at the coronoid process, sigmoid notch, condyle, and the gonion. The distance from the anterior ramus point to the posterior ramus point on the five horizontal planes was designated the anteroposterior horizontal distance of the ramus for each plane. The perpendicular distance from each anterior ramus point to each vertical plane through the MnF was designated the horizontal distance from the anterior ramus to the Mn F. The horizontal and vertical positions were examined by regression analysis. Regression analysis showed the heights of the coronoid process, sigmoid notch, and condyle for the five horizontal planes were significantly related to the height of the MnF, with the highest significance associated with the MnF-mandibular plane (coefficients of determination (R2): 0.424, 0.597, and 0.604, respectively). The horizontal anteroposterior length of the ramus and the distance from the anterior ramus point to the MnF were significant by regression analysis. The relative position of the MnF was significantly related to the vertical heights of the sigmoid notch, coronoid process, and condyle as well as to the horizontal anteroposterior length of the ascending ramus. These findings should be clinically useful for patients with skeletal class III mandibular prognathism

  8. Novel three dimensional position analysis of the mandibular foramen in patients with skeletal class III mandibular prognathism

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Sang Hoon; Kim, Yeon Ho; Won, Yu Jin; Kim, Moon Key [Dept. of Oral and Maxillofacial Surgery, National Health Insurance Service Ilsan Hospital, Goyang (Korea, Republic of)

    2016-06-15

    To analyze the relative position of the mandibular foramina (MnFs) in patients diagnosed with skeletal class III malocclusion. Computed tomography (CT) images were collected from 85 patients. The vertical lengths of each anatomic point from the five horizontal planes passing through the MnF were measured at the coronoid process, sigmoid notch, condyle, and the gonion. The distance from the anterior ramus point to the posterior ramus point on the five horizontal planes was designated the anteroposterior horizontal distance of the ramus for each plane. The perpendicular distance from each anterior ramus point to each vertical plane through the MnF was designated the horizontal distance from the anterior ramus to the Mn F. The horizontal and vertical positions were examined by regression analysis. Regression analysis showed the heights of the coronoid process, sigmoid notch, and condyle for the five horizontal planes were significantly related to the height of the MnF, with the highest significance associated with the MnF-mandibular plane (coefficients of determination (R2): 0.424, 0.597, and 0.604, respectively). The horizontal anteroposterior length of the ramus and the distance from the anterior ramus point to the MnF were significant by regression analysis. The relative position of the MnF was significantly related to the vertical heights of the sigmoid notch, coronoid process, and condyle as well as to the horizontal anteroposterior length of the ascending ramus. These findings should be clinically useful for patients with skeletal class III mandibular prognathism.

  9. Epigenetic Metabolite Acetate Inhibits Class I/II Histone Deacetylases, Promotes Histone Acetylation, and Increases HIV-1 Integration in CD4+ T Cells.

    Science.gov (United States)

    Bolduc, Jean-François; Hany, Laurent; Barat, Corinne; Ouellet, Michel; Tremblay, Michel J

    2017-08-15

    In this study, we investigated the effect of acetate, the most concentrated short-chain fatty acid (SCFA) in the gut and bloodstream, on the susceptibility of primary human CD4 + T cells to HIV-1 infection. We report that HIV-1 replication is increased in CD3/CD28-costimulated CD4 + T cells upon acetate treatment. This enhancing effect correlates with increased expression of the early activation marker CD69 and impaired class I/II histone deacetylase (HDAC) activity. In addition, acetate enhances acetylation of histones H3 and H4 and augments HIV-1 integration into the genome of CD4 + T cells. Thus, we propose that upon antigen presentation, acetate influences class I/II HDAC activity that transforms condensed chromatin into a more relaxed structure. This event leads to a higher level of viral integration and enhanced HIV-1 production. In line with previous studies showing reactivation of latent HIV-1 by SCFAs, we provide evidence that acetate can also increase the susceptibility of primary human CD4 + T cells to productive HIV-1 infection. IMPORTANCE Alterations in the fecal microbiota and intestinal epithelial damage involved in the gastrointestinal disorder associated with HIV-1 infection result in microbial translocation that leads to disease progression and virus-related comorbidities. Indeed, notably via production of short-chain fatty acids, bacteria migrating from the lumen to the intestinal mucosa could influence HIV-1 replication by epigenetic regulatory mechanisms, such as histone acetylation. We demonstrate that acetate enhances virus production in primary human CD4 + T cells. Moreover, we report that acetate impairs class I/II histone deacetylase activity and increases integration of HIV-1 DNA into the host genome. Therefore, it can be postulated that bacterial metabolites such as acetate modulate HIV-1-mediated disease progression. Copyright © 2017 American Society for Microbiology.

  10. [The application of Edgewise technique auxillary with extra oral anchorage and class III elastic in the treatment of bimaxillary protrusion.].

    Science.gov (United States)

    Liu, H H; Weng, S E; Chen, R J

    1995-12-01

    In the treatment of growing bimaxillary protrusion patients,Edgewise technique auxillary with extra oral anchorage and class III elastic help to improve the patient's chin shape,recover his beauty of lower facial part and get a good occlusion along with the growing of mandible.The purpose of this study is:analysis the force system in the treatment and evaluate the result of the treatment with some typical cases.

  11. Oral Rehabilitation With Orthognathic Surgery After Dental Implant Placement for Class III Malocclusion With Skeletal Asymmetry and Posterior Bite Collapse.

    OpenAIRE

    Ohba, Seigo; Nakatani, Yuya; Kawasaki, Takako; Tajima, Nobutaka; Tobita, Takayoshi; Yoshida, Noriaki; Sawase, Takashi; Asahina, Izumi

    2015-01-01

    Increasing numbers of older patients are seeking orthognathic surgery to treat jaw deformity. However, orthodontic and orthognathic surgical treatment is difficult in cases without occlusal vertical stop. A 55-year-old man presented with Class III malocclusion and mandibular protrusion including esthetic problems and posterior bite collapse. He underwent dental implant treatment to reconstruct an occlusal vertical stop before orthognathic surgery. His occlusal function and esthetic problems i...

  12. Enactment of KEPIC MNH Based on 2007 ASME BPVC Section III Division 1, Subsection NH: Class 1 Components in Elevated Temperature Service

    International Nuclear Information System (INIS)

    Koo, Gyeong Hoi; Kim, J. B.; Lee, H. Y.; Park, C. G.

    2008-11-01

    This report is a draft of an enactment of KEPIC MNH based on 2007 ASME Boiler and Pressure Vessel Code, Section III, Division 1 Subsection NH for Class 1 Components in Elevated Temperature Service and contains of ASME Article NH-3000 design, the mandatory appendix I-14, and non-mandatory appendices T and X

  13. Enactment of KEPIC MNH Based on 2007 ASME BPVC Section III Division 1, Subsection NH: Class 1 Components in Elevated Temperature Service

    Energy Technology Data Exchange (ETDEWEB)

    Koo, Gyeong Hoi; Kim, J. B.; Lee, H. Y.; Park, C. G

    2008-11-15

    This report is a draft of an enactment of KEPIC MNH based on 2007 ASME Boiler and Pressure Vessel Code, Section III, Division 1 Subsection NH for Class 1 Components in Elevated Temperature Service and contains of ASME Article NH-3000 design, the mandatory appendix I-14, and non-mandatory appendices T and X.

  14. Preventing an identity crisis: unexpected co-expression of class III beta-tubulin and glial fibrillary acidic protein in human fetal astrocytes in culture

    Czech Academy of Sciences Publication Activity Database

    Katsetos, C.D.; Dráberová, Eduarda; Del Valle, L.; Bertrand, L.; Agamanolis, D.P.; de Chadarévian, J.-P.; Legido, A.; Dráber, Pavel

    2007-01-01

    Roč. 26, č. 11 (2007), s. 107-107 ISSN 0364-5134 R&D Projects: GA MŠk LC545; GA ČR GA204/05/2375 Institutional research plan: CEZ:AV0Z50520514 Keywords : class III beta-tubulin * fetal glia Subject RIV: EB - Genetics ; Molecular Biology

  15. Orthodontic decompensation in skeletal Class III malocclusion: redefining the amount of movement assessed by Cone-Beam Computed Tomography

    Directory of Open Access Journals (Sweden)

    José Antonio Zuega Cappellozza

    2015-10-01

    Full Text Available Introduction:Cone-Beam Computed Tomography (CBCT is essential for tridimensional planning of orthognathic surgery, as it allows visualization and evaluation of bone structures and mineralized tissues. Tomographic slices allow evaluation of tooth inclination and individualization of movement performed during preoperative decompensation. The aim of this paper was to assess maxillary and mandibular incisors inclination pre and post orthodontic decompensation in skeletal Class III malocclusion.Methods:The study was conducted on six individuals with skeletal Class III malocclusion, surgically treated, who had Cone-Beam Computed Tomographic scans obtained before and after orthodontic decompensation. On multiplanar reconstruction view, tomographic slices (axial, coronal and sagittal were obtained on the long axis of each incisor. The sagittal slice was used for measurement taking, whereas the references used to assess tooth inclination were the long axis of maxillary teeth in relation to the palatal plane and the long axis of mandibular teeth in relation to the mandibular plane.Results:There was significant variation in the inclination of incisors before and after orthodontic decompensation. This change was of greater magnitude in the mandibular arch, evidencing that natural compensation is more effective in this arch, thereby requiring more intensive decompensation.Conclusion:When routinely performed, the protocols of decompensation treatment in surgical individuals often result in intensive movements, which should be reevaluated, since the extent of movement predisposes to reduction in bone attachment levels and root length.

  16. Complex networks for data-driven medicine: the case of Class III dentoskeletal disharmony

    International Nuclear Information System (INIS)

    Scala, A; Auconi, P; Scazzocchio, M; Caldarelli, G; McNamara, JA; Franchi, L

    2014-01-01

    In the last decade, the availability of innovative algorithms derived from complexity theory has inspired the development of highly detailed models in various fields, including physics, biology, ecology, economy, and medicine. Due to the availability of novel and ever more sophisticated diagnostic procedures, all biomedical disciplines face the problem of using the increasing amount of information concerning each patient to improve diagnosis and prevention. In particular, in the discipline of orthodontics the current diagnostic approach based on clinical and radiographic data is problematic due to the complexity of craniofacial features and to the numerous interacting co-dependent skeletal and dentoalveolar components. In this study, we demonstrate the capability of computational methods such as network analysis and module detection to extract organizing principles in 70 patients with excessive mandibular skeletal protrusion with underbite, a condition known in orthodontics as Class III malocclusion. Our results could possibly constitute a template framework for organising the increasing amount of medical data available for patients’ diagnosis. (paper)

  17. Natural Mallow Fiber-Reinforced Epoxy Composite for Ballistic Armor Against Class III-A Ammunition

    Science.gov (United States)

    Nascimento, Lucio Fabio Cassiano; Holanda, Luane Isquerdo Ferreira; Louro, Luis Henrique Leme; Monteiro, Sergio Neves; Gomes, Alaelson Vieira; Lima, Édio Pereira

    2017-10-01

    Epoxy matrix composites reinforced with up to 30 vol pct of continuous and aligned natural mallow fibers were for the first time ballistic tested as personal armor against class III-A 9 mm FMJ ammunition. The ballistic efficiency of these composites was assessed by measuring the dissipated energy and residual velocity after the bullet perforation. The results were compared to those in similar tests of aramid fabric (Kevlar™) commonly used in vests for personal protections. Visual inspection and scanning electron microscopy analysis of impact-fractured samples revealed failure mechanisms associated with fiber pullout and rupture as well as epoxy cracking. As compared to Kevlar™, the mallow fiber composite displayed practically the same ballistic efficiency. However, there is a reduction in both weight and cost, which makes the mallow fiber composites a promising material for personal ballistic protection.

  18. Occlusal plane change after intrusion of maxillary posterior teeth by microimplants to avoid maxillary surgery with skeletal Class III orthognathic surgery.

    Science.gov (United States)

    Park, Hyo-Sang; Kim, Ji-Yeun; Kwon, Tae-Geon

    2010-11-01

    To increase stability and mandibular setback movement, surgical maxillary impaction is normally performed with mandibular setback surgery in treating adult skeletal Class III patients. This article demonstrates the use of microimplants for anchorage to intrude molars and the resultant rotation of the maxillary occlusal plane clockwise to increase the surgical mandibular setback and reduce the posterior vertical dimension instead of maxillary surgical impaction. A 21-year-old man with mandibular prognathism was treated with mandibular setback surgery that included orthodontic treatment for decompensation. Microimplants placed into the palatal alveolar bone between the maxillary first and second molars were used to intrude the maxillary posterior teeth and change the occlusal plane clockwise. This produced 4 mm more of distal movement of the chin during mandibular setback surgery compared with the surgical prediction with no change in the occlusal plane. These results were similar to those of 2-jaw surgery with maxillary posterior impaction. The intrusion of the maxillary posterior teeth with microimplants might prevent the need for maxillary surgery in adult skeletal Class III patients. Copyright © 2010 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

  19. Orthodontic treatment for prominent lower front teeth (Class III malocclusion) in children.

    Science.gov (United States)

    Watkinson, Simon; Harrison, Jayne E; Furness, Susan; Worthington, Helen V

    2013-09-30

    Prominent lower front teeth (termed reverse bite; under bite; Class III malocclusion) may be due to a combination of the jaw or tooth positions or both. The upper jaw (maxilla) can be too far back or the lower jaw (mandible) too far forward, or both. Prominent lower front teeth can also occur if the upper front teeth (incisors) are tipped back or the lower front teeth are tipped forwards, or both. Various treatment approaches have been described to correct prominent lower front teeth in children and adolescents. To assess the effects of orthodontic treatment for prominent lower front teeth in children and adolescents. We searched the following databases: Cochrane Oral Health Group's Trials Register (to 7 January 2013), the Cochrane Central Register of Controlled Trials (CENTRAL) (The Cochrane Library 2012, Issue 12), MEDLINE via OVID (1946 to 7 January 2013), and EMBASE via OVID (1980 to 7 January 2013). Randomised controlled trials (RCTs) recruiting children or adolescents or both (aged 16 years or less) receiving any type of orthodontic treatment to correct prominent lower front teeth (Class III malocclusion). Orthodontic treatments were compared with control groups who received either no treatment, delayed treatment or a different active intervention. Screening of references, identification of included and excluded studies, data extraction and assessment of the risk of bias of the included studies was performed independently and in duplicate by two review authors. The mean differences with 95% confidence intervals were calculated for continuous data. Meta-analysis was only undertaken when studies of similar comparisons reported comparable outcome measures. A fixed-effect model was used. The I2 statistic was used as a measure of statistical heterogeneity. Seven RCTs with a total of 339 participants were included in this review. One study was assessed as at low risk of bias, three studies were at high risk of bias, and in the remaining three studies risk of bias

  20. Tratamento compensatorio da má oclusnao de classe lll: revisão de literatura

    OpenAIRE

    Dílio, Rogério Cássio [UNESP; Micheletti, Kelly Regina [UNESP; Cuoghi, Osmar Aparecido [UNESP; Bertoz, André Pinheiro de Magalhães [UNESP

    2014-01-01

    Class III malocclusion is less common occlusal relationship, covering less than 5% of the population. There are various forms of treatment in Class III malocclusion. Depending on how the form is expressed Class III and age of the patient, the therapy may be orthopedic and orthodontic surgical orthodontics. The objective was to review the literature of the last 10 years about ways to compensatory treatment of Class III malocclusion. Several articles were published between 04/2003 and 04/2013 i...

  1. Expression of class III beta tubulin in cervical cancer patients administered preoperative radiochemotherapy: correlation with response to treatment and clinical outcome.

    Science.gov (United States)

    Ferrandina, Gabriella; Martinelli, Enrica; Zannoni, Gian Franco; Distefano, Mariagrazia; Paglia, Amelia; Ferlini, Cristiano; Scambia, Giovanni

    2007-02-01

    Alterations of the beta subunit of tubulin have been reported to be predictive of resistance to radiation and antitubulin agents in several solid tumors. The aim of the study was to investigate the clinical role of beta III tubulin expression as prognostic factor for survival and as a predictive parameter of response to preoperative radiochemotherapy in a single institutional series of locally advanced cervical cancer (LACC) patients. The study included 98 LACC patients admitted to the Gynecologic Oncology Unit, Catholic University of Rome and Campobasso between January 1998 and January 2005. Immunohistochemistry was performed by using the polyclonal rabbit anti-beta III tubulin antibody (Covance, Princeton, NJ, USA). The value of 10% immunostained tumor cells was arbitrarily chosen as cut-off value to distinguish cases with high versus low beta III tubulin content. In the whole series, beta III tubulin immunoreaction was detectable in 66/98 cases (67.3%), and the percentage of positively stained cells ranged from 0 to 100% (median=10%). The percentages of cases with high beta III tubulin expression were shown not to be differently distributed according to clinico-pathological characteristics. There was no statistically significant difference in the distribution of cases with high beta III tubulin expression according to clinical and pathological response to treatment. During the follow-up period, recurrence and death of disease occurred in 15 and 13 cases, respectively. There was no difference in disease-free and overall survival in cases with high versus low beta III tubulin expression. The assessment of class III beta tubulin status seems of little usefulness in order to identify LACC patients with poor chance of response to concomitant radiochemotherapy and unfavorable prognosis.

  2. Cloning and functional characterization of a class III chitinase gene ...

    African Journals Online (AJOL)

    Analysis of the VvChiF III amino acid sequence showed that this gene corresponds to the Glyco-hydro-18 super family that consisting of a signal peptide with the length of 25 amino acids. Purified VvChiF III showed chitinase activity toward the soluble substrate, glycolchitin and antifungal activity against Botrytis cinerea.

  3. Class III beta-tubulin is constitutively coexpressed with glial fibrillary acidic protein and nestin in midgestational human fetal astrocytes: implications for phenotypic identity

    Czech Academy of Sciences Publication Activity Database

    Dráberová, Eduarda; Del Valle, L.; Gordon, J.; Marková, Vladimíra; Šmejkalová, Barbora; Bertrand, L.; de Chadarévian, J.-P.; Agamanolis, D.P.; Legido, A.; Khalili, K.; Dráber, Pavel; Katsetos, C.D.

    2008-01-01

    Roč. 67, č. 4 (2008), s. 341-354 ISSN 0022-3069 R&D Projects: GA MŠk LC545; GA ČR GA204/05/2375 Institutional research plan: CEZ:AV0Z50520514 Keywords : astrocytes * class III beta-tubulin * fetal glia Subject RIV: EB - Genetics ; Molecular Biology Impact factor: 5.140, year: 2008

  4. Prosthetic rehabilitation of severe Siebert′s Class III defect with modified Andrews bridge system

    Directory of Open Access Journals (Sweden)

    Manu Rathee

    2015-01-01

    Full Text Available Prosthetic dentistry involves the replacement of missing and contiguous tissues with artificial substitutes to restore and maintain the oral functions, appearance, and health of the patient. The treatment of edentulous areas with ridge defects poses a challenging task for the dentist. Management of such cases involves a wide range of treatment options comprising mainly of surgical interventions and non surgical techniques such as use of removable, fixed or fixed- removable partial dentures. But each treatment plan undertaken should be customized according to patient needs. A variety of factors such as quality and quantity of existing contiguous hard and soft tissues, systemic condition and economic status of the patient play an important role in treatment planning, clinical outcome and prognosis. This case report presents the restoration of a Seibert′s Class III ridge defect by an economical modification of Andrews Bridge in a 32 Year old patient.

  5. A Surgery-first approach in surgical-orthodontic treatment of mandibular prognathism--a case report.

    Science.gov (United States)

    Yu, Chung-Chih; Chen, Po-Hsun; Liou, Eric J W; Huang, Chiung-Shing; Chen, Yu-Ray

    2010-01-01

    The conventional approach in orthodontic surgery treatment of dentofacial anomalies requires a varied period of pre-surgical orthodontic treatment. This presurgical period is considered to be important for adequate surgical treatment and stable results. This period is usually long bothersome for patients because dental decompensation is required and there is consequent deterioration of aesthetics and function, especially in cases of skeletal Class III occlusion. At Chang Gung Craniofacial Center, a surgery-first approach (SFA), i.e. minimal pre-surgical orthodontics, is one of the treatment choices for Class III patients. In this report, we present a 19-year-old man with mandibular prognathism, an anterior open bite and severe dental crowding treated with SFA. The patient received orthognathic surgery a week after bracing of the teeth. The operation and recovery were uneventful as well as the following orthodontic treatment. The total treatment time was only four months, much shorter than with the conventional approach. The patient benefitted from immediate improvement of the facial profile after surgery, and a much shorter total treatment, and the results were not compromised. We believe in selected cases, SFA is a good and effective treatment alternative.

  6. Ribonucleotide reductase class III, an essential enzyme for the anaerobic growth of Staphylococcus aureus, is a virulence determinant in septic arthritis.

    Science.gov (United States)

    Kirdis, Ebru; Jonsson, Ing-Marie; Kubica, Malgorzata; Potempa, Jan; Josefsson, Elisabet; Masalha, Mahmud; Foster, Simon J; Tarkowski, Andrzej

    2007-01-01

    Staphylococcus aureus is the most common cause of joint infections. It also contributes to several other diseases such as pneumonia, osteomyelitis, endocarditis, and sepsis. Bearing in mind that S. aureus becomes rapidly resistant to new antibiotics, many studies survey the virulence factors, with the aim to find alternative prophylaxis/treatment regimens. One potential virulence factor is the bacterial ability to survive at different oxygen tensions. S. aureus expresses ribonucleotide reductases (RNRs), which help it to grow under both aerobic and anaerobic conditions, by reducing ribonucleotides to deoxyribonucleotides. In this study, we investigated the role of RNR class III, which is required for anaerobic growth, as a virulence determinant in the pathogenesis of staphylococcal arthritis. The wild-type S. aureus strain and its isogenic mutant nrdDG mutant were inoculated intravenously into mice. Mice inoculated with the wild-type strain displayed significantly more severe arthritis, with significantly more synovitis and destruction of the bone and cartilage versus mutant strain inoculated mice. Further, the persistence of bacteria in the kidneys was significantly more pronounced in the group inoculated with the wild-type strain. Together these results indicate that RNR class III is an important virulence factor for the establishment of septic arthritis.

  7. Application for Permit to Operate a Class III Solid Waste Disposal Site at the Nevada Test Site - U10c Disposal Site

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environmental Programs

    2010-08-05

    The NTS is located approximately 105 km (65 mi) northwest of Las Vegas, Nevada. NNSA/NSO is the federal lands management authority for the NTS and NSTec is the Management & Operations contractor. Access on and off the NTS is tightly controlled, restricted, and guarded on a 24-hour basis. The NTS is posted with signs along its entire perimeter. NSTec is the operator of all solid waste disposal sites on the NTS. The U10C Disposal Site is located in the northwest corner of Area 9 at the NTS (Figure 1) and is located in a subsidence crater created by two underground nuclear events, one in October 1962 and another in April 1964. The disposal site opened in 1971 for the disposal of rubbish, refuse, pathological waste, asbestos-containing material, and industrial solid waste. A Notice of Intent form to operate the disposal site as a Class II site was submitted to the state of Nevada on January 26, 1994, and was acknowledged in a letter to the DOE on February 8, 1994. It operated as a state of Nevada Class II Solid Waste Disposal Site (SWDS) until it closed on October 5, 1995, for retrofit as a Class III SWDS. The retrofit consisted of the installation of a minimum four-foot compacted soil layer to segregate the different waste types and function as a liner to inhibit leachate and water flow into the lower waste zone. Five neutron monitoring tubes were installed in this layer to monitor possible leachate production and water activity. Upon acceptance of the installed barrier and approval of an Operating Plan by NDEP/BFF, the site reopened in January 1996 as a Class III SWDS for the disposal of industrial solid waste and other inert waste.

  8. Five-year follow-up of maxillary distraction osteogenesis on the dentofacial structures of children with cleft lip and palate.

    Science.gov (United States)

    Gürsoy, Seda; Hukki, Jyri; Hurmerinta, Kirsti

    2010-04-01

    To determine the long-term outcomes of maxillary distraction osteogenesis (DO) on skeletal and dental structures of growing children with cleft lip and palate. Severe maxillary deficiencies were treated with a rigid external distractor device followed by a consolidation period. Preoperative and postoperative orthodontic treatment lasted a mean of 14 months and 16 months, respectively. The landmarks on standard lateral cephalometric x-rays were digitized and angular and linear measurements were compared by Student's t test to assess the changes before distraction, after distraction, after consolidation, at 1-year follow-up, and at 2-year follow-up. Long-term follow-up (5 years) was interpreted according to mean values because of the small sample size. During DO, the maxilla was horizontally advanced and moved downward as indicated by the significant changes at the SNA and ANB angles (13 degrees) and at maxillary points A, ANS, and PNS. The increase at the divergence between the maxilla and mandible (ANS-PNS/Me-Go) was found to be significant. The mandible (B, Pg, Me) also moved downward (2-4 mm) and backward (Gn) significantly because of mandibular autorotation. The overjet increased (mean increase, 13.7 mm) and the overbite decreased significantly. The advancement of the upper incisors (13.3 mm) and upper molars (12.3 mm) was slightly more than the skeletal points. In a long-term follow-up (5 years), the ANB angle and horizontal overjet continued to decrease but both values remained positive, indicating a Class I relationship. This cephalometric study of young adolescents with cleft lips and palates found great improvement in dentofacial structure after maxillary DO and stability in maxillary skeletal advancement. During a 5-year follow-up, the achieved dentoskeletal treatment outcome was partly diminished. The extreme need for maxillary advancement or facial correction because of psychosocial stress and providing an easier approach for finalizing osteotomy are the

  9. Cone-Beam Computed Tomography Assessment of Lower Facial Asymmetry in Unilateral Cleft Lip and Palate and Non-Cleft Patients with Class III Skeletal Relationship.

    Science.gov (United States)

    Lin, Yifan; Chen, Gui; Fu, Zhen; Ma, Lian; Li, Weiran

    2015-01-01

    To evaluate, using cone-beam computed tomography (CBCT), both the condylar-fossa relationships and the mandibular and condylar asymmetries between unilateral cleft lip and palate (UCLP) patients and non-cleft patients with class III skeletal relationship, and to investigate the factors of asymmetry contributing to chin deviation. The UCLP and non-cleft groups consisted of 30 and 40 subjects, respectively, in mixed dentition with class III skeletal relationships. Condylar-fossa relationships and the dimensional and positional asymmetries of the condyles and mandibles were examined using CBCT. Intra-group differences were compared between two sides in both groups using a paired t-test. Furthermore, correlations between each measurement and chin deviation were assessed. It was observed that 90% of UCLP and 67.5% of non-cleft subjects had both condyles centered, and no significant asymmetry was found. The axial angle and the condylar center distances to the midsagittal plane were significantly greater on the cleft side than on the non-cleft side (P=0.001 and P=0.028, respectively) and were positively correlated with chin deviation in the UCLP group. Except for a larger gonial angle on the cleft side, the two groups presented with consistent asymmetries showing shorter mandibular bodies and total mandibular lengths on the cleft (deviated) side. The average chin deviation was 1.63 mm to the cleft side, and the average absolute chin deviation was significantly greater in the UCLP group than in the non-cleft group (P=0.037). Compared with non-cleft subjects with similar class III skeletal relationships, the subjects with UCLP showed more severe lower facial asymmetry. The subjects with UCLP presented with more asymmetrical positions and rotations of the condyles on axial slices, which were positively correlated with chin deviation.

  10. Comprehensive surgical. Orthodontic treatment of class III malocclusion in cleft patient involving minimally invasive surgery Case report and literature review.

    Science.gov (United States)

    Stojkovic, Goran; Stojkovic, Miodrag; Stojkovic, Jasna; Nikolic, Dejan; Stajcic, Zoran

    2016-12-19

    Surgical and orthodontic treatment of a teenage cleft patient. Authors describe the case of a 13 year old female cleft patient presented with class III malocclusion RESULT: The patient underwent comprehensive surgical secondary bone grafting and orthodontic treatment. Stable skeletal and occlusal class I relationship was achived and maintained in the post treatment observation period till the age of 16. Although several authors suggests primary gingivoperiosteoplasty, other advocates that such early intervention can cause later restrictions in maxillary growth. For alveolar reconstruction, maxillary growth and dental age were the main considerations in determining the timing of surgical intervention. This case showed that borderline cases of complex dentoalveolar and skeletal anomaly in cleft patients could be successfully treated with comprehensive secondary bone grafting and orthodontic treatment thus avoiding the need for orthognatic surgery. Alveolar bone grafting, Cleft, Malocclusion.

  11. Correlation between dentofacial esthetics and mental temperament: A clinical photographic analysis using visagism

    Directory of Open Access Journals (Sweden)

    Tanikonda Rambabu

    2018-01-01

    Full Text Available Background: “Visagism,” a proposed novel concept, makes it possible for the patients to express the desirable emotions and personality traits, through their smile. According to this concept, clinicians can design a smile that blends with the patient's physical appearance, personality, and desires. Aim: To establish a relation, if any, between the smile pattern (dentofacial esthetics determined by three parameters, i.e., tooth form, long axes of maxillary anterior teeth, and connection line between embrasure and the personality traits (four mental temperaments through the concept of visagism. Settings and Design: A total of 190 participants aged between 20 and 38 years from a dental college were selected for the study. Materials and Methods: The temperaments of the participants were identified using a self-reporting questionnaire. The photographs of frontal view of teeth in centric occlusion of the participants were captured, and their tooth forms, long axes, and embrasure lines were drawn using photograph editing software. The type of temperament obtained from the questionnaire for each participant was compared with that obtained from photographic evaluation. Statistical Analysis Used: The obtained data were statistically analyzed by applying Kappa statistics for kappa measure of agreement. Results: There was no agreement between temperaments derived through questionnaire and those temperaments obtained from the photographic analysis. Conclusion: Although the concept of combining the principles of smile design and mental temperaments through visagism is an appreciable idea, it lacks a practical approach to create a personalized smile for each patient by including mental temperaments at present stage.

  12. Progressive changes in patients with skeletal Class III malocclusion treated by 2-jaw surgery with minimal and conventional presurgical orthodontics: A comparative study.

    Science.gov (United States)

    Zhou, Yang; Li, Zili; Wang, Xiaoxia; Zou, Bingshuang; Zhou, Yanheng

    2016-02-01

    In this study, we aimed to compare treatment efficacy and postsurgical stability between minimal presurgical orthodontics and conventional presurgical orthodontics for patients with skeletal Class III malocclusion. Forty patients received minimal presurgical orthodontics (n = 20) or conventional presurgical orthodontics (n = 20). Lateral cephalograms were obtained before treatment, before orthognathic surgery, and at 1 week, 3 months, 6 months, and 12 months after surgery. Changes of overjet and mandibular incisal angle before surgery were greater in the conventional presurgical orthodontics group than in the minimal presurgical orthodontics group. Postsurgical horizontal changes in Points A and B, overjet, and mandibular incisal angle showed significant differences among the time points. Most of the horizontal and vertical relapses in the maxilla and the mandible occurred within the first 6 months in both groups. Minimal presurgical orthodontics and conventional presurgical orthodontics showed similar extents and directions of skeletal changes in patients with Class III malocclusion. However, orthodontists and surgeons should preoperatively consider the postsurgical counterclockwise rotation of the mandible when using minimal presurgical orthodontics. Close and frequent observations are recommended in the early postsurgical stages. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

  13. Effects of lifestyle interventions that include a physical activity component in class II and III obese individuals: a systematic review and meta-analysis.

    Directory of Open Access Journals (Sweden)

    Aurélie Baillot

    Full Text Available In class II and III obese individuals, lifestyle intervention is the first step to achieve weight loss and treat obesity-related comorbidities before considering bariatric surgery. A systematic review, meta-analysis, and meta-regression were performed to assess the impact of lifestyle interventions incorporating a physical activity (PA component on health outcomes of class II and III obese individuals.An electronic search was conducted in 4 databases (Medline, Scopus, CINAHL and Sportdiscus. Two independent investigators selected original studies assessing the impact of lifestyle interventions with PA components on anthropometric parameters, cardiometabolic risk factors (fat mass, blood pressure, lipid and glucose metabolism, behaviour modification (PA and nutritional changes, and quality of life in adults with body mass index (BMI ≥ 35 kg/m2. Estimates were pooled using a random-effect model (DerSimonian and Laird method. Heterogeneity between studies was assessed by the Cochran's chi-square test and quantified through an estimation of the I².Of the 3,170 identified articles, 56 met our eligibility criteria, with a large majority of uncontrolled studies (80%. The meta-analysis based on uncontrolled studies showed significant heterogeneity among all included studies. The pooled mean difference in weight loss was 8.9 kg (95% CI, 10.2-7.7; p < 0.01 and 2.8 kg/m² in BMI loss (95% CI, 3.4-2.2; p < 0.01. Long-term interventions produced superior weight loss (11.3 kg compared to short-term (7.2 kg and intermediate-term (8.0 kg interventions. A significant global effect of lifestyle intervention on fat mass, waist circumference, blood pressure, total cholesterol, LDL-C, triglycerides and fasting insulin was found (p<0.01, without significant effect on HDL-C and fasting blood glucose.Lifestyle interventions incorporating a PA component can improve weight and various cardiometabolic risk factors in class II and III obese individuals. However, further

  14. [Limiting factors in the class III camouflage treatment: a potential protocol].

    Science.gov (United States)

    Chaques Asensi, José

    2016-06-01

    The Class III skeletal malocclusion has been traditionally treated with a combined approach of orthodontics and orthognathic surgery or with a strategy of orthodontic camouflage. Some severe cases can be identified as ideal candidates for a surgical treatment whereas some others can be handled with orthodontics alone, with a reasonable expectation of an acceptable result. However, the problem remains for the borderline patient. In fact, limited information is available in the literature regarding the identification of the factors that can help in establishing the limits for one treatment modality or the other. Furthermore, the quantification of some of these factors, for practical purposes, is practically missing or very seldom suggested. Therefore, the decision making process remains a subjective reflection based on the "good clinical sense" of the orthodontist or just reduced to an "educated guess". In order to add some information, hopefully useful in deciding the most suitable treatment option for the individual patient, we propose a clinical protocol based on four different factors. Namely: the skeletal discrepancy, the occlusal discrepancy, the periodontal condition and facial aesthetics. For each one of these factors several parameters will be evaluated and, for some of them, an attempt to provide some reference numerical values will be made. Finally, clinical examples will be presented to illustrate the concepts discussed and the treatment alternatives, final treatment plan and treatment outcome will be analyzed for each one of them. © EDP Sciences, SFODF, 2016.

  15. Class III orthognathic surgical cases facilitated by accelerated osteogenic orthodontics: a preliminary report.

    Science.gov (United States)

    Wu, JiaQi; Xu, Li; Liang, Cheng; Jiang, JiuHui

    2015-11-01

    To describe a multidisciplinary treatment approach that includes corticotomy, orthodontic force and orthognathic surgery for the management of skeletal Class III surgical cases. The main advantage of the combined techniques is a reduction in treatment time for young adult patients. Accelerated Osteogenic Orthodontics (AOO) was delivered to three young adult patients during their pre-surgical orthodontic treatment. After aligning and levelling the dental arches, a piezosurgical corticotomy was performed to the buccal aspect of the alveolar bone. Bone graft materials were used to cover the decorticated area and soft tissue flaps were replaced. The mean time for extraction space closure was 5.4 ± 1.3 months and the mean time for pre-surgical orthodontic treatment was 12.0 ± 0.9 months. The average total treatment time was 20.4 ± 2.4 months. A pre-existing bony fenestration in the buccal cortex adjacent to the right lateral incisor root apex of Case 1 was corrected. The facial aesthetics of three patients improved following multidisciplinary treatment. This approach may be an efficient method for the orthognathic patient who desires a reduced treatment time, but further clinical research is required.

  16. Associação entre doença hepática gordurosa não alcoólica e marcadores de lesão/função hepática com componentes da síndrome metabólica em indivíduos obesos classe III Association between non-alcoholic fatty liver disease and liver function/injury markers with metabolic syndrome components in class III obese individuals

    Directory of Open Access Journals (Sweden)

    Gabriela Villaça Chaves

    2012-06-01

    Full Text Available OBJETIVO: Investigar a associação entre doença hepática gordurosa não alcoólica (DHGNA e os marcadores de lesão e função hepática com os componentes da síndrome metabólica (SM em indivíduos obesos classe III. MÉTODOS: A população estudada foi constituída por 144 pacientes com obesidade classe III (IMC > a 40 kg/m². A SM foi identificada segundo o critério do NCEP ATP III, por meio da determinação do perfil lipídico, glicemia e insulina basal. Foram quantificados ainda os marcadores de função e lesão hepática. A resistência à insulina (RI foi verificada pelo índice HOMA-IR e o diagnóstico da DHGNA por ressonância magnética. Os cálculos estatísticos foram realizados pelo programa estatístico SPSS na versão 13.0. A associação foi verificada pelo teste Mann-Whitney e qui-quadrado, com nível de significância de 5%. RESULTADOS: Foi encontrada associação significativa entre o diagnóstico de SM e DHGNA (χ² = 6,84; p = 0,01. Quanto aos componentes diagnósticos para SM, constatou-se associação positiva e significativa entre HDL-c (p = 0,05, circunferência da cintura (p OBJECTIVE: To investigate the association between non-alcoholic fatty liver disease (NAFLD and liver function/injury markers with components of metabolic syndrome (MS in class III obese individuals. METHODS: The study population consisted of 144 patients with class III obesity (body mass index [BMI] > 40 kg/m². MS was diagnosed according to the National Cholesterol Education Program - Adult Treatment Panel III (NCEP ATP III criteria, by determining the lipid profile, blood glucose and basal insulin. Liver function/injury markers were also quantified. Insulin resistance (IR was measured by HOMA-IR and NAFLD diagnosis was established by magnetic resonance imaging (MRI. Statistical calculations were performed by SPSS version 13.0. The association was assessed by the Mann-Whitney and Chi-square tests, with a level of significance set at 5

  17. WHO Class of Obesity Influences Functional Recovery Post-TKA.

    Science.gov (United States)

    Maniar, Rajesh N; Maniar, Parul R; Singhi, Tushar; Gangaraju, Bharat Kumar

    2018-03-01

    No study in the literature has compared early functional recovery following total knee arthroplasty (TKA) in the obese with the nonobese using World Health Organization (WHO) classes of obesity. Our aim was to compare functional scores and flexion post-TKA in each class of obesity as per WHO classification against a matched control group of nonobese patients. Records of 885 consecutive primary TKA patients (919 knees) operated by a single surgeon were reviewed. The first 35 knees in each class I, class II and class III obesity group during the study period were then matched with a similar number of knees in nonobese TKA patients during the same period. Functional scores recorded pre- and postoperatively at 3 months and 1 year were Western Ontario and McMaster Osteoarthritis Index (WOMAC), Short-Form Health Survey (SF-12) score, and Knee Society Score (KSS). There was no difference in any parameter between the class I obese and matched nonobese at any assessment point. In the class II obese, as compared to the nonobese, there was no difference in any parameter preoperatively and 3 months postoperatively. However, 1 year postoperatively, the SF-12 physical subscore was lower in the class II obese than the nonobese (44.7 vs. 48.6, p = 0.047) and the WOMAC score was significantly higher (15.8 vs. 9.7, p = 0.04). In the class III obese, the WOMAC score was significantly higher than the nonobese (58.1 vs. 44.3, p lower (83.5 vs. 96.5, p = 0.049 preoperatively; 172 vs. 185; p = 0.003 at 1 year). Knee flexion was significantly lower in the class III obese than the nonobese (95 vs. 113; p class I obese can expect good early and late functional recovery as the nonobese. The class II obese can expect comparable early functional recovery as the nonobese but their late function may be lesser. The class III obese would have poorer functional scores and lesser knee flexion postoperatively compared to the nonobese. However, compared to their own preoperative status, there is

  18. The duration of pubertal growth peak among three skeletal classes

    Directory of Open Access Journals (Sweden)

    Waqar Jeelani

    Full Text Available ABSTRACT Introduction: Pubertal growth peak is closely associated with a rapid increase in mandibular length and offers a wide range of therapeutic modifiability. Objective: The aim of the present study was to determine and compare the mean ages of onset and duration of pubertal growth peak among three skeletal classes. Methods: A retrospective cross-sectional study was conducted using lateral cephalograms of 230 subjects with growth potential (110 males, 120 females. Subjects were categorized into three classes (Class I = 81, Class II = 82, Class III = 67, according to the sagittal relationship established between the maxilla and the mandible. The cervical vertebral maturation stage was recorded by means of Baccetti's method. The mean ages at CS3 and CS4 and the CS3-CS4 age interval were compared between boys and girls and among three skeletal classes. Results: Pubertal growth peak occurred on average four months earlier in girls than boys (p = 0.050. The average duration of pubertal growth peak was 11 months in Class I, seven months in Class II and 17 months in Class III subjects. Interclass differences were highly significant (Cohen's d > 0.08. However, no significant difference was found in the timing of pubertal growth peak onset among three skeletal classes (p = 0.126 in boys, p = 0.262 in girls. Conclusions: Girls enter pubertal growth peak on average four months earlier than boys. Moreover, the duration of pubertal growth peak is on average four months shorter in Class II and six months longer in Class III subjects as compared to Class I subjects.

  19. Non-surgical alternative in the treatment of skeletal Class III problems.

    Science.gov (United States)

    Jefferson, Y

    1995-01-01

    The dental profession is not static, but dynamic. New research findings, along with medical and technological advances, necessitate constant re-examination of treatment philosophies and techniques. What were acceptable treatment techniques in the past may not necessarily be the most effective and best techniques for our patients today. Currently, many practitioners feel that the only treatment for the correction of a skeletal Class III abnormality is via orthognathic surgery in older patients. In some cases it may be the only treatment option. But in most cases today, there are more conservative, non-surgical treatment alternatives in correcting Class III problems in younger aged children. In treating facial-skeletal problems, it must be emphasized that the human face is a biological masterpiece of form and function. Its importance has been documented in arts and sciences since the beginning of modern civilization. It is important enough so that individuals who are blessed with attractive features are afforded greater opportunities in our society. Attractive faces are associated with intelligence, honesty and good work ethics. With the advent of orthognathic surgery, functional appliance, functional regulator, and myofunctional therapy, the dental profession has the capability of leveling out the playing field for many individuals in our society. It does so by being able to correct problems closely associated with the human psyche--the human face. The ability to change facial features brings tremendous prestige to our profession. Along with this prestige comes greater responsibility. Our ability to change facial features entails greater understanding of facial balance and harmony. Ricketts states that the face must conform to stringent proportions known as the "divine proportion" in order for it to be esthetically pleasing. Also, our ability to move facial-skeletal structures entails greater understanding of the biomechanics of the human face. Without this

  20. Effects of orthognathic surgery for class III malocclusion on signs and symptoms of temporomandibular disorders and on pressure pain thresholds of the jaw muscles.

    Science.gov (United States)

    Farella, M; Michelotti, A; Bocchino, T; Cimino, R; Laino, A; Steenks, M H

    2007-07-01

    The aim of this longitudinal study was to determine the effects of orthognathic surgery on signs and symptoms of temporomandibular disorders (TMD) and on pressure pain thresholds (PPTs) of the jaw muscles. Fourteen consecutive class III patients undergoing pre-surgical orthodontic treatment were treated by combined Le Fort I osteotomy and bilateral sagittal ramus osteotomy. The clinical examination included the assessment of signs and symptoms of TMD and the assessment of PPTs of the masseter and temporalis muscles. Anamnestic, clinical and algometric data were collected during five sessions over a 1-year period. Seven out of 14 patients presented with disc displacement with reduction at baseline, whereas four patients (two of them were new cases) did so at the end of follow up (p>0.05). None of the patients were diagnosed with myofascial pain of the jaw muscles at the beginning or end of follow up. PPTs of the masseter and temporalis muscles did not change significantly from baseline values throughout the whole study period. The occurrence of signs and symptoms of TMD fluctuates with an unpredictable pattern after orthognathic surgery for class III malocclusions.

  1. Orthodontic-orthognathic interventions in orthognathic surgical cases: "Paper surgery" and "model surgery" concepts in surgical orthodontics

    Directory of Open Access Journals (Sweden)

    Narayan H Gandedkar

    2016-01-01

    Full Text Available Thorough planning and execution is the key for successful treatment of dentofacial deformity involving surgical orthodontics. Presurgical planning (paper surgery and model surgery are the most essential prerequisites of orthognathic surgery, and orthodontist is the one who carries out this procedure by evaluating diagnostic aids such as crucial clinical findings and radiographic assessments. However, literature pertaining to step-by-step orthognathic surgical guidelines is limited. Hence, this article makes an attempt to provide an insight and nuances involved in the planning and execution. The diagnostic information revealed from clinical findings and radiographic assessments is integrated in the "paper surgery" to establish "surgical-plan." Furthermore, the "paper surgery" is emulated in "model surgery" such that surgical bite-wafers are created, which aid surgeon to preview the final outcome and make surgical movements that are deemed essential for the desired skeletal and dental outcomes. Skeletal complexities are corrected by performing "paper surgery" and an occlusion is set up during "model surgery" for the fabrication of surgical bite-wafers. Further, orthodontics is carried out for the proper settling and finishing of occlusion. Article describes the nuances involved in the treatment of Class III skeletal deformity individuals treated with orthognathic surgical approach and illustrates orthodontic-orthognathic step-by-step procedures from "treatment planning" to "execution" for successful management of aforementioned dentofacial deformity.

  2. Oral Health and Dentofacial Anomalies among β-THALASSEMIA Major in Erbil City, Iraq

    Science.gov (United States)

    Saeed, Lamya M.; Majeed, Vian O.

    2010-04-01

    Thalassemias are a heterogeneous group of genetic disorders characterized by hypochromic microcytic anemia that caused by deficient synthesis of one or more of globin subunits of human hemoglobin. This study has been conducted in the Northern part of Iraq among 238 subjects having β-thalassemia major (BTM). To evaluate their oral health status, dentofacial anomalies of patients who attended the Thalassemic center in Erbil city, were compared to 258 subjects of a control group according to the criteria suggested by the WHO in 1997, which is used to assess permanent teeth. Only 8.51% of the total study group demonstrated crowding of anterior teeth in one or both segments compared to the control group. Spacing in the incisal segments was higher, namely 19.23% in BTM compared to13.6% in the control group with a statistically significant difference (p<0.05). A higher percentage of both study and control groups were having an overbite grade (0.3-5.0 mm) of 49.59%, and 56.81%, respectively. It was found that the distal deviation from the normal anteroposterior molar relation in BTM was higher compared to the control group. Nearly similar percentages of patients were found to have an over jet grade(0.0-3.5 mm). Values of plaque and gingival health indices were recorded to be higher among the study group (plaque index = 1.570, ∓0.321 and gingival index = 1.205, ∓0.308). Differences were statistically highly significant for all indices (p<0.01). This may indicate that there is a negative attitude and poor dental knowledge of thalassemic subjects and their parents toward proper oral hygiene and dental health.

  3. A Comparison of Mandibular Transverse Dimensions of a Class I Normal and Class II Patient Population using Anterior to Posterior Measurement Ratios

    Science.gov (United States)

    2012-04-13

    Orthodontics and Dentofacial Orthopedics. Volume 136, Issue 1, July 2009, Pages 17.e1-17.e9. 5. Bernardes RA, de Paulo RS, Pereira LO, Duarte MA...simulated external root resorptions . Dent Traumatol. 2012 11: doi: 10.1111/j.1600-9657.2011.01113.x. [Epub ahead of print] 6. Bjerin, R. A comparison...small volume cone beam computed tomography and intraoral periapical radiography for the detection of simulated external inflammatory root resorption

  4. Dental compensation for skeletal Class III malocclusion by isolated extraction of mandibular teeth. Part 1: Occlusal situation 12 years after completion of active treatment.

    Science.gov (United States)

    Zimmer, Bernd; Schenk-Kazan, Sarah

    2015-05-01

    The purpose of this work was to statistically evaluate the outcomes achieved by isolated extraction of mandibular teeth (second premolars or first molars) for Class III compensation. Part A of the study dealt with the quality of outcomes at the end of active treatment, using weighted Peer Assessment Rating (PAR) scores determined on the basis of casts for 25 (14 female and 11 male) consecutive patients aged 16 ± 1.7 years at the time of debonding. These results were compared to the scores in a randomly selected control group of 25 (14 female and 11 male) patients who were 14.7 ± 1.9 years old at debonding. Part B evaluated the long-term stability of the outcomes based on 12 (all of them female) patients available for examination after a mean of 11.8 years. The mean weighted PAR scores obtained in both study parts were analyzed for statistical differences using a two-tailed paired Student's t-test at a significance level of p ≤ 0.05. Mean weighted PAR scores of 4.76 ± 3.94 and 3.92 ± 3.44 were obtained in the Class III extraction group and the control group, respectively, at the end of active treatment. This difference was not significant (p = 0.49). Among the 12 longitudinal patients, the mean score increased from 4 ± 3.46 at debonding to 6.25 ± 3.67 by the end of the 11.8-year follow-up period. This difference was significant (p = 0.0008). Treatment of Class III anomalies by isolated extraction of lower premolars or molars can yield PAR scores similar to those achieved by standard therapies. These scores, while increasing significantly, remained at a clinically acceptable level over 11.8 years. Hence this treatment modality--intended for cases that border on requiring orthognathic surgery--may also be recommended from a long-term point of view.

  5. Orthopedic treatment of Class III malocclusion with rapid maxillary expansion combined with a face mask: a cephalometric assessment of craniofacial growth patterns

    Directory of Open Access Journals (Sweden)

    Daniella Torres Tagawa

    2012-06-01

    Full Text Available OBJECTIVE: The aim of this prospective study was to assess potential changes in the cephalometric craniofacial growth pattern of 17 children presenting Angle Class III malocclusion treated with a Haas-type expander combined with a face mask. METHODS: Lateral cephalometric radiographs were taken at beginning (T1 and immediately after removal of the appliances (T2, average of 11 months of treatment. Linear and angular measurements were used to evaluate the cranial base, dentoskeletal changes and facial growth pattern. RESULTS: The length of the anterior cranial base experienced a reduction while the posterior cranial base assumed a more vertical position at T1. Some maxillary movement occurred, there was no rotation of the palatal plane, there was a slight clockwise rotation of the mandible, although not significant. The ANB angle increased, thereby improving the relationship between the jaws; dentoalveolar compensation was more evident in the lower incisors. Five out of 12 cases (29.41% showed the following changes: In one case the pattern became more horizontal and in four cases more vertical. CONCLUSIONS: It was concluded after a short-term assessment that treatment with rapid maxillary expansion (RME associated with a face mask was effective in the correction of Class III malocclusion despite the changes in facial growth pattern observed in a few cases.

  6. Root cementum modulates periodontal regeneration in Class III furcation defects treated by the guided tissue regeneration technique: a histometric study in dogs.

    Science.gov (United States)

    Gonçalves, Patricia F; Gurgel, Bruno C V; Pimentel, Suzana P; Sallum, Enilson A; Sallum, Antonio W; Casati, Márcio Z; Nociti, Francisco H

    2006-06-01

    Because the possibility of root cementum preservation as an alternative approach for the treatment of periodontal disease has been demonstrated, this study aimed to histometrically evaluate the effect of root cementum on periodontal regeneration. Bilateral Class III furcation defects were created in dogs, and each dog was randomly assigned to receive one of the following treatments: control (group A): scaling and root planing with the removal of root cementum; or test (group B): removal of soft microbial deposits by polishing the root surface with rubber cups and polishing paste, aiming at maximum cementum preservation. Guided tissue regeneration (GTR) was applied to both groups. Four months after treatment, a superior length of new cementum (3.59 +/- 1.67 mm versus 6.20 +/- 2.26 mm; P = 0.008) and new bone (1.86 +/- 1.76 mm versus 4.62 +/- 3.01 mm; P = 0.002) and less soft tissue along the root surface (2.77 +/- 0.79 mm versus 1.10 +/- 1.48 mm; P = 0.020) was observed for group B. Additionally, group B presented a larger area of new bone (P = 0.004) and a smaller area of soft tissue (P = 0.008). Within the limits of this study, root cementum may modulate the healing pattern obtained by guided tissue regeneration in Class III furcation defects.

  7. Comparison of changes in the transverse dental axis between patients with skeletal Class III malocclusion and facial asymmetry treated by orthognathic surgery with and without presurgical orthodontic treatment.

    Science.gov (United States)

    Song, Han-Sol; Choi, Sung-Hwan; Cha, Jung-Yul; Lee, Kee-Joon; Yu, Hyung-Seog

    2017-07-01

    To evaluate transverse skeletal and dental changes, including those in the buccolingual dental axis, between patients with skeletal Class III malocclusion and facial asymmetry after bilateral intraoral vertical ramus osteotomy with and without presurgical orthodontic treatment. This retrospective study included 29 patients with skeletal Class III malocclusion and facial asymmetry including menton deviation > 4 mm from the midsagittal plane. To evaluate changes in transverse skeletal and dental variables (i.e., buccolingual inclination of the upper and lower canines and first molars), the data for 16 patients who underwent conventional orthognathic surgery (CS) were compared with those for 13 patients who underwent preorthodontic orthognathic surgery (POGS), using three-dimensional computed tomography at initial examination, 1 month before surgery, and at 7 days and 1 year after surgery. The 1-year postsurgical examination revealed no significant changes in the postoperative transverse dental axis in the CS group. In the POGS group, the upper first molar inclined lingually on both sides (deviated side, -1.8° ± 2.8°, p = 0.044; nondeviated side, -3.7° ± 3.3°, p = 0.001) and the lower canine inclined lingually on the nondeviated side (4.0° ± 5.4°, p = 0.022) during postsurgical orthodontic treatment. There were no significant differences in the skeletal and dental variables between the two groups at 1 year after surgery. POGS may be a clinically acceptable alternative to CS as a treatment to achieve stable transverse axes of the dentition in both arches in patients with skeletal Class III malocclusion and facial asymmetry.

  8. Comparative study of design of piping supports class 1, 2 and 3 considering german code KTA and ASME III - NF

    International Nuclear Information System (INIS)

    Faloppa, Altair A.; Fainer, Gerson; Mattar Neto, Miguel; Elias, Marcos V.

    2013-01-01

    The objective of this paper is developing a comparative study of the design criteria for class 1, 2, 3 piping supports considering the American Code ASME Section III - NF and the German Code KTA 3205.1 to the Primary Circuit, KTA 3205.2 to the others systems and KTA 3205.3 series-production standards supports of a PWR nuclear power plant. An additional purpose of the paper is a general analysis of the main design concepts of the American Code ASME Boiler and Pressure Vessel Code, Section III, Division 1 and German Nuclear Design Code KTA that was performed in order to aid the comparative study proposed. The relevance of this study is to show the differences between codes ASME and KTA since they were applied in the design of the Nuclear Power Plants Angra 1 and Angra 2, and to the design of Angra 3, which is at the moment under construction. It is also considered their use in the design of nuclear installations such as RMB - Reator MultiProposito Brasileiro and LABGENE - Laboratorio de Geracao Nucleoeletrica. (author)

  9. One-stage closure of isolated cleft palate with the Veau-Wardill-Kilner V to Y pushback procedure or the Cronin modification. IV. Cephalometric comparison of transverse dentofacial morphology.

    Science.gov (United States)

    Heliövaara, A

    1994-02-01

    The transverse dentofacial morphology of 116 consecutive patients with isolated cleft palate was studied by PA-headfilms at 17-20 years of age. One-stage soft and hard palate closure had been carried out at the mean age of 1.8 years using the Veau-Wardill-Kilner or the Cronin mucoperiosteal palatal V-Y pushback technique. In multivariate statistical analyses no significant findings were observed with regard to craniofacial measurements and operation method, additional palate operations, cleft extent at birth or associated minor anomalies. The effect of sex was consistently in the same direction with males having larger values. The bizygomatic width (Zydx-Zysin) was greater for those who had familial disposition for clefts. No asymmetries were detected.

  10. Orthodontic camouflage versus orthognathic surgery for class III deformity: comparative cephalometric analysis.

    Science.gov (United States)

    Martinez, P; Bellot-Arcís, C; Llamas, J M; Cibrian, R; Gandia, J L; Paredes-Gallardo, V

    2017-04-01

    The objective of this study was to compare different cephalometric variables in adult patients with class III malocclusions before and after treatment, in order to determine which variables are indicative of orthodontic camouflage or orthognathic surgery. The cases of 156 adult patients were assessed: 77 treated with orthodontic camouflage and 79 treated with orthodontics and orthognathic surgery. The following cephalometric variables were measured on pre-treatment (T1) and post-treatment (T2) lateral cephalograms: sella-nasion-A-point (SNA), sella-nasion-B-point (SNB), and A-point-nasion-B-point (ANB) angles, Wits appraisal, facial axis angle, mandibular plane angle, upper and lower incisor inclination, and inter-incisal angle. There were statistically significant differences in cephalometric variables before and after treatment between the two groups. The percentage of normal pre-treatment measurements in the camouflage orthodontics group was 30.7%, which worsened slightly to 28.4% post-treatment. However in the group receiving surgery, this was 24.5% pre-treatment, improving to 33.5% after surgery. SNA, SNB, Wits appraisal, lower incisor inclination, and inter-incisal angle showed differences between the two groups before and after treatment. Wits appraisal, lower incisor inclination, and inter-incisal angle were indicative of one or other treatment. Upper and lower incisor decompensation in both groups did not reach ideal values, which impeded complete skeletal correction in 52% of surgical cases. Copyright © 2016 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  11. Role of Class III phosphoinositide 3-kinase in the brain development: possible involvement in specific learning disorders.

    Science.gov (United States)

    Inaguma, Yutaka; Matsumoto, Ayumi; Noda, Mariko; Tabata, Hidenori; Maeda, Akihiko; Goto, Masahide; Usui, Daisuke; Jimbo, Eriko F; Kikkawa, Kiyoshi; Ohtsuki, Mamitaro; Momoi, Mariko Y; Osaka, Hitoshi; Yamagata, Takanori; Nagata, Koh-Ichi

    2016-10-01

    Class III phosphoinositide 3-kinase (PIK3C3 or mammalian vacuolar protein sorting 34 homolog, Vps34) regulates vesicular trafficking, autophagy, and nutrient sensing. Recently, we reported that PIK3C3 is expressed in mouse cerebral cortex throughout the developmental process, especially at early embryonic stage. We thus examined the role of PIK3C3 in the development of the mouse cerebral cortex. Acute silencing of PIK3C3 with in utero electroporation method caused positional defects of excitatory neurons during corticogenesis. Time-lapse imaging revealed that the abnormal positioning was at least partially because of the reduced migration velocity. When PIK3C3 was silenced in cortical neurons in one hemisphere, axon extension to the contralateral hemisphere was also delayed. These aberrant phenotypes were rescued by RNAi-resistant PIK3C3. Notably, knockdown of PIK3C3 did not affect the cell cycle of neuronal progenitors and stem cells at the ventricular zone. Taken together, PIK3C3 was thought to play a crucial role in corticogenesis through the regulation of excitatory neuron migration and axon extension. Meanwhile, when we performed comparative genomic hybridization on a patient with specific learning disorders, a 107 Kb-deletion was identified on 18q12.3 (nt. 39554147-39661206) that encompasses exons 5-23 of PIK3C3. Notably, the above aberrant migration and axon growth phenotypes were not rescued by the disease-related truncation mutant (172 amino acids) lacking the C-terminal kinase domain. Thus, functional defects of PIK3C3 might impair corticogenesis and relate to the pathophysiology of specific learning disorders and other neurodevelopmental disorders. Acute knockdown of Class III phosphoinositide 3-kinase (PIK3C3) evokes migration defects of excitatory neurons during corticogenesis. PIK3C3-knockdown also disrupts axon outgrowth, but not progenitor proliferation in vivo. Involvement of PIK3C3 in neurodevelopmental disorders might be an interesting future

  12. PENGGUNAAN FACE-MASK & EKSPANSI PALATAL PADA PERAWATAN MALOKLUSI KLAS III (Studi Pustaka)

    OpenAIRE

    Krisnawati Krisnawati

    2015-01-01

    Class III skeletal anomaly is one of the most difficult malocclusions to correct in orthodontics. Orthodontist usually involved chincup appliances to restrain mandibular growth, camouflage techniques to advances maxillary incisors and retract mandibular incisors or waiting untul growth ceased to pursue orthognathic surgery. Many studies found that most of Class III malocclusions were characterized by maxillary retrognathism. In the late 1960s, the Delaire mask was popularized to protract the ...

  13. 14 CFR 61.68 - Category III pilot authorization requirements.

    Science.gov (United States)

    2010-01-01

    ...) The addition of another type of aircraft to the applicant's Category III pilot authorization. (2) To... height, as applicable, including use of a radar altimeter; (iii) Recognition of and proper reaction to... an aircraft of the same category and class, and type, as applicable, as the aircraft for which the...

  14. Orthodontic treatment for a mandibular prognathic girl of short stature under growth hormone therapy

    Directory of Open Access Journals (Sweden)

    Chin-Yun Pan

    2013-12-01

    Full Text Available This report presents a case of a 12-year-old girl with maxillary deficiency, mandibular prognathism, and facial asymmetry, undergoing growth hormone (GH therapy due to idiopathic short stature. Children of short stature with or without GH deficiency have a deviating craniofacial morphology with overall smaller dimensions; facial retrognathism, especially mandibular retrognathism; and increased facial convexity. However, a complete opposite craniofacial pattern was presented in our case of a skeletal Class III girl with idiopathic short stature. The orthodontic treatment goal was to inhibit or change the direction of mandibular growth and stimulate the maxillary growth of the girl during a course of GH therapy. Maxillary protraction and mandibular retraction were achieved using occipitomental anchorage (OMA orthopedic appliance in the first stage of treatment. In the second stage, the patient was treated with a fixed orthodontic appliance using a modified multiple-loop edgewise archwire technique of asymmetric mechanics and an active retainer of vertical chin-cup. The treatment led to an acceptable facial profile and obvious facial asymmetry improvement. Class I dental occlusion and coincident dental midline were also achieved. A 3½-year follow-up of the girl at age 18 showed a stable result of the orthodontic and dentofacial orthopedic treatment. Our case shows that the OMA orthopedic appliance of maxillary protraction combined with mandibular retraction is effective for correcting skeletal Class III malocclusion with midface deficiency and mandibular prognathism in growing children with idiopathic short stature undergoing GH therapy.

  15. The Effect of early physiotherapy on the recovery of mandibular function after orthognathic surgery for Class III correction: part I--jaw-motion analysis.

    Science.gov (United States)

    Teng, Terry Te-Yi; Ko, Ellen Wen-Ching; Huang, Chiung Shing; Chen, Yu-Ray

    2015-01-01

    The aim of this prospective study was to compare the mandibular range of motion in Class III patients with and without early physiotherapy after orthognathic surgery (OGS). This study consisted of 63 Class III patients who underwent 2-jaw OGS. The experimental group comprised 31 patients who received early systematic physical rehabilitation. The control group consisted of 32 patients who did not have physical rehabilitation. Twelve variables of 3-dimensional (3D) jaw-motion analysis (JMA) were recorded before surgery (T1) and 6 weeks (T2) and 6 months (T3) after surgery. A 2-sample t test was conducted to compare the JMA results between the two groups at different time points. At T2, the JMA data were measured to be 77.5%-145.7% of presurgical values in the experimental group, and 60.3%-90.6% in the control group. At T3, the measurements were 112.2%-179.2% of presurgical values in the experimental group, and 77.6%-157.2% in the control group. The patients in the experimental group exhibited more favorable recovery than did those in the control group, from T1 to T2 and T1 to T3. However, after termination of physiotherapy, no significant difference in the extent of recovery was observed between groups up to 6 months after OGS. Copyright © 2014 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

  16. Combined Orthodontic-surgical Treatment for Skeletal Class III Malocclusion with Multiple Impacted Permanent and Supernumerary Teeth: Case Report.

    Science.gov (United States)

    Xue, Dai Juan And Feng

    2014-01-01

    In this report we describe a combined orthodontic and surgical treatment for a 14-year-old boy with severe skeletal class III deformity and dental problem. His upper posterior primary teeth in the left side were over-retained and 6 maxillary teeth (bilateral central incisors and canines, left first and second premolars) were impacted, together with 5 supernumerary teeth in both arches. The treatment protocol involved extraction of all the supernumerary and deciduous teeth, surgical exposure and orthodontic traction of the impacted teeth, a bimaxillary orthognathic approach including Lefort I osteotomy. Bilateral sagittal split ramus osteotomy (BSSRO) and genioplasty was performed to correct skeletal problem. After treatment, all of the impacted teeth were brought to proper alignment in the maxillary arch. A satisfied profile and good posterior occlusion was achieved. Treatment mechanics and consideration during different stages are discussed.

  17. Má oclusão Classe I de Angle, com mordida aberta anterior, tratada com extração de dentes permanentes Angle Class I malocclusion, with anterior open bite, treated with extraction of permanent teeth

    Directory of Open Access Journals (Sweden)

    Mírian Aiko Nakane Matsumoto

    2011-02-01

    Full Text Available A mordida aberta é uma anomalia com características distintas que, além da complexidade dos múltiplos fatores etiológicos, traz consequências estéticas e funcionais. Muitas alternativas têm sido utilizadas em seu tratamento, entre elas a grade palatina, forças ortopédicas, ajuste oclusal, camuflagem com ou sem exodontias, mini-implantes ou miniplacas e cirurgia ortognática. O diagnóstico preciso e a determinação da etiologia permitem estabelecer os objetivos e o plano de tratamento ideal para essa má oclusão. O presente relato descreve o tratamento de uma má oclusão Classe I de Angle, com padrão esquelético de Classe II e mordida aberta anterior, realizado em duas fases e que foi apresentado à diretoria do Board Brasileiro de Ortodontia e Ortopedia Facial (BBO, representando a categoria 2, como parte dos requisitos para a obtenção do título de Diplomado pelo BBO.Open bite is an anomaly with distinct characteristics which, in addition to involving complex, multiple etiologic factors, entails aesthetic and functional consequences. Many alternative approaches have been employed to treat open bite, including palatal crib, orthopedic forces, occlusal adjustment, camouflage with or without extractions, mini-implants or mini-plates, and orthognathic surgery. By determining accurate diagnosis and etiology professionals can set the goals and ideal treatment plan for this malocclusion. This report, describing the two stages treatment of a Angle Class I malocclusion with Class II skeletal pattern and anterior open bite, was presented to the Brazilian Board of Orthodontics and Dentofacial Orthopedics (BBO, representative of category 2, as partial fulfillment of the requirements for obtaining the title of BBO Diplomate.

  18. Perawatan Maloklusi Kelas III Skeletal dengan Kombinasi Ortodontik-Bedah Orthognatik

    Directory of Open Access Journals (Sweden)

    Nia Ayu Ismaniati

    2015-09-01

    Full Text Available Non-growing patient with excessive mandible and underdeveloped of the maxilla who classified as a class III skeletal malocclusion often found in the orthodontic daily practice. If they come earlier when potential growth is still left, sometimes growth modification can be applied to prevent further facial deformity (by using extra-oral device, for instance. In non-growing class III malocclusions, treatment alternative may consist of compromised-treatment without concerning an ideal treatment goal. However, with the development of knowledge and skills and with the potential improvement of interspecialistic team-work, nowadays, ideal facial aesthetics become possible. The combined orthodontic-orthognathic surgical treatment alternative to correct skeletal facial deformity may be a better alternative. This treatment changes the hostile environment, so that a more stable treatment result with better facial appearance can be achieved. This poster presents a case report of severe class III skeletal malocclusion whose treted with combined orthodontic-orthognathic surgery. The facial and dental improvements as well as the cephalometric changes are presented. The procedure of treatment and the interspecialistic team-work will also be briefly described.

  19. Relação entre o estado nutricional de vitamina a e a regressão da esteatose hepática após gastroplastia em Y- de- Roux para tratamento da obesidade classe III Relationship of the nutritional status of vitamin a and the regression of hepatic steatosis after Roux-en-Y gastric bypass surgery for treatment of class III obesity

    Directory of Open Access Journals (Sweden)

    Luiz Gustavo de Oliveira e Silva

    2012-12-01

    Full Text Available RACIONAL: A vitamina A participa de várias funções primordiais no organismo humano e as suas concentrações séricas podem estar diminuídas nas doenças crônicas não transmissíveis. OBJETIVO: Avaliar a relação entre o estado nutricional da vitamina A, e a regressão da esteatose hepática em indivíduos submetidos à gastroplastia em Y-de-Roux para tratamento da obesidade classe III. MÉTODOS: Foram estudados 30 pacientes obesos classe III, de ambos os sexos, com esteatose hepática, submetidos à gastroplastia em Y-de-Roux. Seis meses após a operação, os pacientes foram submetidos à ultrassonografia abdominal e distribuídos em dois grupos: grupo 1 - pacientes com esteatose detectada na ultrassonografia e grupo 2 - pacientes sem esteatose detectada na ultrassonografia. No pré-operatório e seis meses após a operação foram realizadas análises antropométricas e exames bioquímicos: insulina basal, glicemia, Homeostasis Model Assessment Index (HOMA IR, colesterol, HDL, LDL, triglicerídeos, AST, ALT, Gama-GT, albumina, bilirrubina total, retinol, e beta caroteno. RESULTADOS: A média de perda de peso foi de 35,05 + 10,47 (pBACKGROUND: Vitamin A participates in several essentials functions in the human body and their serum concentrations may be decreased in non-transmissible diseases. AIM: To assess the relationship of the nutritional status of Vitamin A through the serum concentrations of retinol and beta carotene, with regression of hepatic steatosis in individuals who undergone Roux-en-Y gastric bypass surgery for treatment of class III obesity. METHODS: Were included 30 individuals, male and female, submitted to Roux-en-Y gastric bypass for treatment of class III obesity, who were diagnosed through an abdominal ultrasonography as presenting hepatic steatosis. From the result of an ultrasonography screened six months after the surgical procedure those subjects were divided into two groups: group 1 - patients with steatosis

  20. Ethnicity and skeletal Class III morphology: a pubertal growth analysis using thin-plate spline analysis.

    Science.gov (United States)

    Alkhamrah, B; Terada, K; Yamaki, M; Ali, I M; Hanada, K

    2001-01-01

    A longitudinal retrospective study using thin-plate spline analysis was used to investigate skeletal Class III etiology in Japanese female adolescents. Headfilms of 40 subjects were chosen from the archives of the Orthodontic department at Niigata University Dental Hospital, and were traced at IIIB and IVA Hellman dental ages. Twenty-eight homologous landmarks, representing hard and soft tissue, were digitized. These were used to reproduce a consensus for the profilogram, craniomaxillary complex, mandible, and soft tissue for each age and skeletal group. Generalized least-square analysis revealed a significant shape difference between age-matched groups (P spline and partial warps (PW)3 and 2 showed a maxillary retrusion at stage IIIB opposite an acute cranial base at stage IVA. Mandibular total spline and PW4, 5 showed changes affecting most landmarks and their spatial interrelationship, especially a stretch along the articulare-pogonion axis. In soft tissue analysis, PW8 showed large and local changes which paralleled the underlying hard tissue components. Allometry of the mandible and anisotropy of the cranial base, the maxilla, and the mandible asserted the complexity of craniofacial growth and the difficulty of predicting its outcome.

  1. Assessment of pterygomaxillary separation in Le Fort I Osteotomy in class III patients.

    Science.gov (United States)

    Ueki, Koichiro; Hashiba, Yukari; Marukawa, Kohei; Okabe, Katsuhiko; Alam, Shamiul; Nakagawa, Kiyomasa; Yamamoto, Etsuhide

    2009-04-01

    To examine the separation of the pterygomaxillary region at the posterior nasal spine level after Le Fort I osteotomy in Class III patients. The study group consisted of 37 Japanese patients with mandibular prognathism and asymmetry, with maxillary retrognathism or asymmetry. A total of 74 sides were examined. Le Fort I osteotomy was performed without a pterygoid osteotome, with an ultrasonic curette used to remove interference at the pterygomaxillary region. Postoperative computed tomography (CT) was analyzed for all patients. The separation of the pterygomaxillary region and the location of the descending palatine artery were assessed. Although acceptable separation between the maxilla and pterygoid plates was achieved in all patients, an exact separation of the pterygomaxillary junction at the posterior nasal spine level was found in only 18 of 74 sides (24%). In 29 of 74 sides (39.2%), the separation occurred anterior to the descending palatine artery. In 29 of 74 sides (39.2%), complete separation between the maxilla and lateral and/or medial pterygoid plate was not achieved, but lower level separation of the maxilla and pterygoid plate was always complete. The maxillary segments could be moved to the postoperative ideal position in all cases. Le Fort I osteotomy without an osteotome does not always induce an exact separation at the pterygomaxillary junction at the posterior nasal spine level, but the ultrasonic bone curette can remove the interference between maxillary segment and pterygoid plates more safely.

  2. Determination of the class and isoform selectivity of small-molecule histone deacetylase inhibitors

    DEFF Research Database (Denmark)

    Khan, N.; Jeffers, M.; Kumar, S.

    2008-01-01

    The human HDAC (histone deacetylase) family, a well-validated anticancer target, plays a key role in the control of gene expression through regulation of transcription. While HDACs can be subdivided into three main classes, the class I, class II and class III HDACs (sirtuins), it is presently...

  3. Extraction of Am (III) and Nd (III): comparison of TODGA and TEHDGA

    International Nuclear Information System (INIS)

    Gujar, R.B.; Murali, M.S.; Ansari, S.A.; Manchanda, V.K.

    2009-01-01

    Belonging to the class of extractants, diglycolamides which are recently explored and promising for actinide partitioning, two reagents (N, N, N', N'-tetraoctyl diglycolamide) TODGA and its isomerically substituted counterpart, (N, N, N', N'- tetraethylhexyl diglycolamide) TEHDGA after addition of suitable phase modifiers, Dihexyoctanamide and isodecanol respectively in dodecane have been compared in their extraction abilities for Am (III) and Nd (III) from nitric acid as well as simulated high-level waste solutions (SHLW) equivalent to HLW arising from PHWR fuel reprocessing. Both 0.1M TODGA + 0.5M DHOA and 0.2M TEHDGA + 30% isodecanol in dodecane display high distribution ratios for the trivalent metal ions of f-elements. Similarities and differences in their extraction are discussed. (author)

  4. Floral nectar of the obligate outcrossing Canavalia gladiata (Jacq.) DC. (Fabaceae) contains only one predominant protein, a class III acidic chitinase.

    Science.gov (United States)

    Ma, X L; Milne, R I; Zhou, H X; Fang, J Y; Zha, H G

    2017-09-01

    Floral nectar can affect the fitness of insect-pollinated plants, through both attraction and manipulation of pollinators. Self-incompatible insect-pollinated plants receive more insect visits than their self-compatible relatives, and the nectar of such species might face increased risk of infestation by pathogens carried by pollinators than self-compatible plants. Proteins in nectar (nectarins) play an important role in protecting the nectar, but little is known regarding nectarins in self-incompatible species. The nectarins from a self-incompatible and insect-pollinated leguminous crop, Canavalia gladiata, were separated using two-dimensional electrophoresis and analysed using mass spectrometry. The predominant nectarin gene was cloned and the gene expression pattern investigated using quantitative real-time PCR. Chitinolytic activity in the nectar was tested with different substrates. The C. gladiata nectar proteome only has one predominant nectarin, an acidic class III chitinase (CaChi3). The full-length CaChi3 gene was cloned, coding for a protein of 298 amino acids with a predicted signal peptide. CaChi3 is very similar to members of the class III chitinase family, whose evolution is dominated by purifying selection. CaChi3 was expressed in both nectary and leaves. CaChi3 has thermostable chitinolytic activity according to glycol-chitin zymography or a fluorogenic substratem but has no lysozyme activity. Chitinase might be a critical protein component in nectar. The extremely simple nectar proteome in C. gladiata disproves the hypothesis that self-incompatible species always have more complex nectar proteomes. Accessibility of nectar might be a significant determinant of the evolutionary pressure to develop nectar defence mechanisms. © 2017 German Botanical Society and The Royal Botanical Society of the Netherlands.

  5. Frontal Changes in the Lower Face After Clockwise Rotation of the Maxillomandibular Complex Without Perisurgical Orthodontic Treatment in Angle Class I and Skeletal Class III Women.

    Science.gov (United States)

    Lee, Sang Woo; Cho, Jeongmok; Kim, Kikap; Ahn, Seung Hyun

    2017-06-01

    Orthognathic surgery has become more popular to slenderize a wide lower face and to improve facial esthetics in Asian patients with normal occlusion. Clockwise rotation (CR) of the maxillomandibular complex (MMC) steepens the mandibular plane. This study performed a quantitative analysis on the influence of CR on slenderness of the lower face from the frontal view. This retrospective study included 36 female patients with Angle Class I occlusion and skeletal Class III pattern. The subjects underwent CR of the MMC without perioperative orthodontic treatment and change in the occlusion only for the purpose of esthetic improvement. Linear and angular variables were measured on a cephalogram and three-dimensional computed tomography (3D CT) obtained before and at least 6 months after surgery. Data were analyzed using paired t tests and Spearman correlations. Univariate regression analysis was used to predict the postoperative change according to the amount of posterior impaction. The mean posterior impaction was 3.81 mm. All mandibular plane angle (MPA) measurements were increased (ranged from 5.69° to 13.12°, p lower face becomes narrower and more slender as the MMC rotates in a clockwise direction. Orthognathic surgery with CR has the advantage of increasing the MPAs and obtaining natural soft tissue contouring while minimizing the amount of bone resection. This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266c .

  6. A classe da NYHA tem relação com a condição funcional e qualidade de vida na insuficiência cardíaca The relationship between NYHA class and the functional condition and quality of life in heart failure

    Directory of Open Access Journals (Sweden)

    Fábio Cangeri Di Naso

    2011-06-01

    Full Text Available A insuficiência cardíaca (IC é uma síndrome que se apresenta com crescente prevalência, podendo limitar o indivíduo quanto à capacidade físico-funcional, condição pulmonar e qualidade de vida. Este estudo tem como objetivo verificar as limitações pulmonares e físicas, bem como a qualidade de vida dos pacientes e compará-las com as classes funcionais da New York Heart Association (NYHA. Estudo transversal, com amostra de 66 pacientes (45 homens. Foram aplicados uma ficha de avaliação padronizada e o questionário de qualidade de vida Short Form-36 (SF-36. Foram realizados espirometria, manovacuometria e o teste da caminhada de seis minutos (TC6M. Os pacientes (classe I: 24 indivíduos, classe II: 27 e classe III: 15 possuíam uma média de idade de 57,95±10,96 anos e representaram uma amostra com características antropométricas homogêneas. Para a condição pulmonar, observou-se diferença estatística quanto a Capacidade Vital Forçada (CVF, Pico de Fluxo Expiratório e Pressão Expiratória Máxima (Pemáx. Na distância do TC6M houve diferença entre classe I e III e entre II e III (classe I: 439,27±58,85 m, classe II: 370,96±74,41 m e classe III: 268,96±83,88 m, com pHeart failure (HF is a syndrome that presents with increasing prevalence, and can restrict the individual as to the physical-functional, lung condition and quality of life. Check the quality of life, lung and physical limitations of patients and compare them with those in New York Heart Association (NYHA functional class. Cross-sectional study, a sample of 66 patients (45 men. It applied a form of standardized assessment, spirometry, manovacuometry, of the six minute walk test (6MWT and questioning the quality of life Short-Form 36 (SF-36. Patients average age of 57.95±10.96 years (Class I: 24, Class II: 27 and Class III: 15 and represented a sample with anthropometric characteristics homogeneous. For the lung condition, we observed a statistical

  7. Three-Dimensional Evaluation of the Upper Airway Morphological Changes in Growing Patients with Skeletal Class III Malocclusion Treated by Protraction Headgear and Rapid Palatal Expansion: A Comparative Research.

    Directory of Open Access Journals (Sweden)

    Xueling Chen

    Full Text Available The aim of this study was to evaluate the morphological changes of upper airway after protraction headgear and rapid maxillary expansion (PE treatment in growing patients with Class III malocclusion and maxillary skeletal deficiency compared with untreated Class III patients by cone-beam computed tomography (CBCT.Thirty growing patients who have completed PE therapy were included in PE group. The control group (n = 30 was selected from the growing untreated patients with the same diagnosis. The CBCT scans of the pre-treatment (T1 and post-treatment (T2 of PE group and the control group were collected. Reconstruction and registration of the 3D models of T1 and T2 were completed. By comparing the data obtained from T1, T2 and control group, the morphological changes of the upper airway during the PE treatment were evaluated.Comparing with the data from T1 group, the subspinale (A of maxilla and the upper incisor (UI of the T2 group were moved in the anterior direction. The gnathion (Gn of mandible was moved in the posterior-inferior direction. The displacement of the hyoid bone as well as the length and width of dental arch showed significant difference. The volume and mean cross-sectional area of nasopharynx, velopharynx and glossopharynx region showed significant difference. The largest anteroposterior/the largest lateral (AP/LR ratios of the velopharynx and glossopharynx were increased, but the AP/LR ratio of the hypopharynx was decreased. In addition, the length and width of the maxillary dental arch, the displacement of the hyoid bone, the volume of nasopharynx and velopharynx, and the AP/LR ratio of the hypopharynx and velopharynx showed significant difference between the data from control and T2 group.The PE treatment of Class III malocclusion with maxillary skeletal hypoplasia leads to a significant increase in the volume of nasopharynx and velopharynx.

  8. Facial and occlusal esthetic improvements of an adult skeletal Class III malocclusion using surgical, orthodontic, and implant treatment

    Science.gov (United States)

    de Almeida Cardoso, Mauricio; de Avila, Erica Dorigatti; Guedes, Fabio Pinto; Battilani Filho, Valter Antonio Ban; Capelozza Filho, Leopoldino; Correa, Marcio Aurelio; Nary Filho, Hugo

    2016-01-01

    The aim of this clinical report is to describe the complex treatment of an adult Class III malocclusion patient who was disappointed with the outcome of a previous oral rehabilitation. Interdisciplinary treatment planning was performed with a primary indication for implant removal because of marginal bone loss and gingival recession, followed by orthodontic and surgical procedures to correct the esthetics and skeletal malocclusion. The comprehensive treatment approach included: (1) implant removal in the area of the central incisors; (2) combined orthodontic decompensation with mesial displacement and forced extrusion of the lateral incisors; (3) extraction of the lateral incisors and placement of new implants corresponding to the central incisors, which received provisional crowns; (4) orthognathic surgery for maxillary advancement to improve occlusal and facial relationships; and finally, (5) orthodontic refinement followed by definitive prosthetic rehabilitation of the maxillary central incisors and reshaping of the adjacent teeth. At the three-year follow-up, clinical and radiographic examinations showed successful replacement of the central incisors and improved skeletal and esthetic appearances. Moreover, a Class II molar relationship was obtained with an ideal overbite, overjet, and intercuspation. In conclusion, we report the successful esthetic anterior rehabilitation of a complex case in which interdisciplinary treatment planning improved facial harmony, provided gingival architecture with sufficient width and thickness, and improved smile esthetics, resulting in enhanced patient comfort and satisfaction. This clinical case report might be useful to improve facial esthetics and occlusion in patients with dentoalveolar and skeletal defects. PMID:26877982

  9. Cyclometalated N-heterocyclic carbene iridium(iii) complexes with naphthalimide chromophores: a novel class of phosphorescent heteroleptic compounds.

    Science.gov (United States)

    Lanoë, Pierre-Henri; Chan, Jonny; Groué, Antoine; Gontard, Geoffrey; Jutand, Anny; Rager, Marie-Noelle; Armaroli, Nicola; Monti, Filippo; Barbieri, Andrea; Amouri, Hani

    2018-03-06

    A series of cyclometalated N-heterocyclic carbene complexes of the general formula [Ir(C^N) 2 (C^C:)] has been prepared. Two sets of compounds were designed, those where (C^C:) represents a bidentate naphthalimide-substituted imidazolylidene ligand and (C^N) = ppy (3a), F2ppy (4a), bzq (5a) and those where (C^C:) represents a naphthalimide-substituted benzimidazolylidene ligand and (C^N) = ppy (3b), F2ppy (4b), bzq (5b). The naphthalimide-imidazole and naphthalimide-benzimidazole ligands 1a,b and the related imidazolium and benzimidazolium salts 2a,b were also prepared and fully characterized. The N-heterocyclic carbene Ir(iii) complexes have been characterized by NMR spectroscopy, cyclic voltammetry and elemental analysis. Moreover, the molecular structures of one imidazolium salt and four Ir(iii) complexes were determined by single-crystal X-ray diffraction. The structures provide us with valuable information, most notably the orientation of the naphthalimide chromophore with respect to the N-heterocyclic carbene moiety. All compounds are luminescent at room temperature and in a frozen solvent at 77 K, exhibiting a broad emission band that extends beyond 700 nm. The presence of the naphthalimide moiety changes the character of the lowest excited state from 3 MLCT to 3 LC, as corroborated by DFT and TD-DFT calculations. Remarkably, replacing imidazole with a benzimidazole unit improves the quantum yields of these compounds by decreasing the k nr values which is an important feature for optimized emission performance. These studies provide valuable insights about a novel class of N-heterocyclic carbene-based luminescent complexes containing organic chromophores and affording metal complexes emitting across the red-NIR range.

  10. Short-term HIIT and Fat max training increase aerobic and metabolic fitness in men with class II and III obesity.

    Science.gov (United States)

    Lanzi, Stefano; Codecasa, Franco; Cornacchia, Mauro; Maestrini, Sabrina; Capodaglio, Paolo; Brunani, Amelia; Fanari, Paolo; Salvadori, Alberto; Malatesta, Davide

    2015-10-01

    To compare the effects of two different 2-week-long training modalities [continuous at the intensity eliciting the maximal fat oxidation (Fatmax) versus high-intensity interval training (HIIT)] in men with class II and III obesity. Nineteen men with obesity (BMI ≥ 35 kg · m(-2)) were assigned to Fatmax group (GFatmax) or to HIIT group (GHIIT). Both groups performed eight cycling sessions matched for mechanical work. Aerobic fitness and fat oxidation rates (FORs) during exercise were assessed prior and following the training. Blood samples were drawn to determine hormones and plasma metabolites levels. Insulin resistance was assessed by the homeostasis model assessment of insulin resistance (HOMA2-IR). Aerobic fitness and FORs during exercise were significantly increased in both groups after training (P ≤ 0.001). HOMA2-IR was significantly reduced only for GFatmax (P ≤ 0.001). Resting non-esterified fatty acids (NEFA) and insulin decreased significantly only in GFatmax (P ≤ 0.002). Two weeks of HIIT and Fatmax training are effective for the improvement of aerobic fitness and FORs during exercise in these classes of obesity. The decreased levels of resting NEFA only in GFatmax may be involved in the decreased insulin resistance only in this group. © 2015 The Obesity Society.

  11. Correlation of Shape and Size of Sella Turcica With the Type of Facial Skeletal Class in an Iranian Group

    International Nuclear Information System (INIS)

    Valizadeh, Solmaz; Shahbeig, Shahrzad; Mohseni, Sudeh; Azimi, Fateme; Bakhshandeh, Hooman

    2015-01-01

    In orthodontic science, diagnosis of facial skeletal type (class I, II, and III) is essential to make the correct treatment plan that is usually expensive and complicated. Sometimes results from analysis of lateral cephalometry radiographies are not enough to discriminate facial skeletal types. In this situation, knowledge about the relationship between the shape and size of the sella turcica and the type of facial skeletal class can help to make a more definitive decision for treatment plan. The present study was designed to investigate this relationship in patients referred to a dental school in Iran. In this descriptive-analytical study, cephalometric radiographies of 90 candidates for orthodontic treatment (44 females and 46 males) with an age range of 14 - 26 years and equal distribution in terms of class I, class II, and class III facial skeletal classification were selected. The shape, length, diameter, and depth of the sella turcica were determined on the radiographs. Linear dimensions were assessed by one-way analysis of variance while the correlation between the dimensions and age was investigated using Pearson’s correlation coefficient. Sella turcica had normal morphology in 24.4% of the patients while irregularity (notching) in the posterior part of the dorsum sella was observed in 15.6%, double contour of sellar floor in 5.6%, sella turcica bridge in 23.3%, oblique anterior wall in 20% and pyramidal shape of the dorsum sella in 11.1% of the subjects. In total, 46.7% of class I patients had a normal shape of sella turcica, 23.3% of class II patients had an oblique anterior wall and a pyramidal shape of the dorsum sella, and 43.3% of class III individuals had sella turcica bridge (the greatest values). Sella turcica length was significantly greater in class III patients compared to class II and class I (P < 0.0001). However, depth and diameter of sella turcica were similar in class I, class II, and class III patients. Furthermore, age was significantly

  12. Treatment of Mandibular Prognathism

    Directory of Open Access Journals (Sweden)

    Hong-Po Chang

    2006-01-01

    Full Text Available Mandibular prognathism (MP or skeletal Class III malocclusion with a prognathic mandible is one of the most severe maxillofacial deformities. Facial growth modification can be an effective method of resolving skeletal Class III jaw discrepancies in growing children with dentofacial orthopedic appliances including the chincup, face mask, maxillary protraction combined with chincup traction and the Fränkel functional regulator III appliance. Orthognathic surgery in conjunction with orthodontic treatment is required for the correction of adult MP. The two most commonly applied surgical procedures to correct MP are sagittal split ramus osteotomy (SSRO and intraoral vertical ramus osteotomy. Both procedures are suitable for patients in whom a desirable occlusal relationship can be obtained with a setback of the mandible, and each has its own advantages and disadvantages. In bilateral SSRO, the intentional ostectomy of the posterior part of the distal segment can offer long-term positioned stability. This may be attributable to reduction of tension in the pterygomasseteric sling that applies force in the posterior mandible. While various environmental factors have been found to contribute to the development of MP, heredity plays a substantial role. The relative contributions of genetic and environmental components in the etiology of MP are unclear. The recent identification of the genetic susceptibilities to MP constitutes the first step toward understanding the molecular pathogenesis of MP. Further studies in molecular biology are needed to identify the gene-environment interactions associated with the phenotypic diversity of MP and the heterogenic developmental mechanisms thought to be responsible for them.

  13. Estudo cefalométrico das alterações no perfil facial em pacientes Classe III dolicocefálicos submetidos à cirurgia ortognática bimaxilar Cephalometric study of the facial profile changes in Class III patients submitted to bimaxillary orthognathic surgery

    Directory of Open Access Journals (Sweden)

    Hewerson Santos Tavares

    2005-10-01

    Full Text Available O presente estudo avaliou as modificações no perfil facial de 15 pacientes portadores de má oclusão Classe III esquelética que foram submetidos a tratamento ortodôntico pré-cirúrgico e cirurgia ortognática bimaxilar estabilizada com fixação rígida. Oito pacientes foram submetidos à mentoplastia. Foram utilizadas telerradiografias pré-cirúrgicas (T1 e pós-cirúrgicas (T2 com um intervalo mínimo de 6 meses. Foram analisados deslocamentos horizontais e verticais em pontos do tecido ósseo e tecido mole. Foi realizada uma comparação entre os casos tratados com e sem mentoplastia (teste t mostrando não haver diferenças entre os grupos. A regressão linear múltipla evidenciou uma correlação significante no sentido horizontal para os pontos Pg e Pgm e vertical para os pontos Me e Mem. Foi encontrada baixa correlação para movimentos no sentido horizontal nos pontos Sena e A, e para os pontos Pn, Sn e Ph. No sentido vertical, os deslocamentos mais evidentes foram entre os pontos Pg, Gn e Me e Sena e A, porém com correlações de baixa intensidade.The present study evaluated the facial profile modifications in 15 skeletal Class III patients that were submitted to presurgical orthodontic treatment and orthognathic bimaxillary surgery stabilized with a rigid fixation. Eight of the patients have undergone to genioplastic surgery. Presurgical (T1 and late postsurgical (T2 radiographs taken apart with a minimum of 6 month interval had been used. The horizontal and vertical displacement of skeletal and soft tissue profile points were analyzed. The comparison of the cases submitted or not to a genioplastic surgery (t Test showed no differences for the displacement of the skeletal and soft tissue points. The multiple linear regression analysis showed a significant correlation for horizontal movements of the Pg and Pgm points and for vertical movements of the Me and Mem points. A low correlation was found for the horizontal movements of

  14. A three-dimensional analysis of skeletal and dental characteristics in skeletal class III patients with facial asymmetry.

    Science.gov (United States)

    Yu, Jinfeng; Hu, Yun; Huang, Mingna; Chen, Jun; Ding, Xiaoqian; Zheng, Leilei

    2018-03-15

    To evaluate the skeletal and dental characteristics in skeletal class III patients with facial asymmetry and to analyse the relationships among various parts of the stomatognathic system to provide a theoretical basis for clinical practice. Asymmetric cone-beam computed tomography data acquired from 56 patients were evaluated using Mimics 10.0 and 3-Matic software. Skeletal and dental measurements were performed to assess the three-dimensional differences between two sides. Pearson correlation analysis was used to determine the correlations among measurements. Linear measurements, such as ramal height, mandible body length, ramal height above the sigmoid notch (RHASN), maxillary height, condylar height, buccal and total cancellous bone thickness, and measurements of condylar size, were significantly larger on the nondeviated side than on the deviated side (P orthodontic camouflage has limitations and potential risks. A combination of orthodontics and orthognathic surgery may be the advisable choice in patients with a menton deviation greater than 4 mm. An important association between vertical skeletal disharmony and dental compensation was also observed.

  15. New Sequence Variants in HLA Class II/III Region Associated with Susceptibility to Knee Osteoarthritis Identified by Genome-Wide Association Study

    Science.gov (United States)

    Nakajima, Masahiro; Takahashi, Atsushi; Kou, Ikuyo; Rodriguez-Fontenla, Cristina; Gomez-Reino, Juan J.; Furuichi, Tatsuya; Dai, Jin; Sudo, Akihiro; Uchida, Atsumasa; Fukui, Naoshi; Kubo, Michiaki; Kamatani, Naoyuki; Tsunoda, Tatsuhiko; Malizos, Konstantinos N.; Tsezou, Aspasia; Gonzalez, Antonio; Nakamura, Yusuke; Ikegawa, Shiro

    2010-01-01

    Osteoarthritis (OA) is a common disease that has a definite genetic component. Only a few OA susceptibility genes that have definite functional evidence and replication of association have been reported, however. Through a genome-wide association study and a replication using a total of ∼4,800 Japanese subjects, we identified two single nucleotide polymorphisms (SNPs) (rs7775228 and rs10947262) associated with susceptibility to knee OA. The two SNPs were in a region containing HLA class II/III genes and their association reached genome-wide significance (combined P = 2.43×10−8 for rs7775228 and 6.73×10−8 for rs10947262). Our results suggest that immunologic mechanism is implicated in the etiology of OA. PMID:20305777

  16. Major histocompatibility complex (MHC) class III genetics in two Amerindian tribes from southern Brazil: the Kaingang and the Guarani.

    Science.gov (United States)

    Weg-Remers, S; Brenden, M; Schwarz, E; Witzel, K; Schneider, P M; Guerra, L K; Rehfeldt, I R; Lima, M T; Hartmann, D; Petzl-Erler, M L; de Messias, I J; Mauff, G

    1997-10-01

    Population genetic studies of the major histocompatibility complex (MHC) class III region, comprising C2, BF and C4 phenotypes, and molecular genetic data are rarely available for populations other than Caucasoids. We have investigated three Amerindian populations from Southern Brazil: 131 Kaingang from Ivaí (KIV), 111 Kaingang (KRC) and 100 Guarani (GRC) from Rio das Cobras. Extended MHC haplotypes were derived after standard C2, BF, C4 phenotyping and restriction fragment length polymorphism (RFLP) analysis with TaqI, together with HLA data published previously by segregation analysis. C2 and BF frequencies corresponded to other Amerindian populations. C4B*Q0 frequency was high in the GRC (0.429) but low in the Kaingang. Unusual C4 alleles were found, viz. C4A*58, A*55 and C4B*22 (presumably non-Amerindian) and aberrant C4A*3 of Amerindian origin occurring with a frequency of 0.223 in the GRC. C4A*3 bands of homo- and heterozygous individuals carrying this variant were Rodgers 1 positive and Chido 1,3 positive, showed a C4A specific lysis type and a C4A like alpha-chain. Polymerase chain reaction studies and sequencing showed that this is based on a C4A*3 duplication with a regular C4A*3 and a partially converted C4A*0304 carrying the C4B specific epitopes Ch 6 and Ch 1,3. Associations of class III haplotypes with particular RFLP patterns were similar to those reported for Caucasoids. The previously described association between combined C4A and CYP21P deletions and the 6.4 kb TaqI fragment was not seen in these Amerindians. This fragment occurred within a regular two locus gene structure in the Kaingang, representing a "short" gene at C4 locus I. C4 and CYP21 duplications were frequently observed. The distribution of extended MHC haplotypes provides evidence for a close relationship between the KIV and KRC and a larger genetic distance between the two Kaingang groups and the GRC.

  17. Impact of malocclusion and dentofacial anomalies on the prevalence and severity of dental caries among adolescents.

    Science.gov (United States)

    Feldens, Carlos Alberto; Dos Santos Dullius, Angela Isabel; Kramer, Paulo Floriani; Scapini, Annarosa; Busato, Adair Luiz Stefanello; Vargas-Ferreira, Fabiana

    2015-11-01

    To investigate the association between malocclusion/dentofacial anomalies and dental caries among adolescents. A cross-sectional study was conducted with 509 adolescents aged 11 to 14 years enrolled at public schools in the city of Osório in southern Brazil. Parents/caregivers answered a structured questionnaire on demographic and socioeconomic variables. A trained examiner recorded the presence of malocclusion (Dental Aesthetic Index [DAI]), traumatic dental injury, and dental caries. Data analysis involved the chi-square, Mann-Whitney, and Kruskal-Wallis tests. Poisson regression with robust variance was used for the multivariable analysis. A total of 44.8% of the adolescents had dental caries (mean DFMT  =  1.33 ± 1.84). The DAI index ranged from 15 to 77 (mean  =  29.0 ± 7.9); 43.6% of the sample had severe malocclusion and 11.6% had traumatic dental injury. The prevalence and severity of dental caries were significantly greater among adolescents with severe malocclusion. The multivariate analysis demonstrated that adolescents with severe or handicapping malocclusion had a 31% greater probability of having dental caries (prevalence ratio: 1.31; 95% CI: 1.02-1.67), independently of demographic, socioeconomic, or clinical aspects. The orthodontic characteristics associated with the occurrence and severity of caries were maxillary irregularity ≥3 mm (P  =  .021) and abnormal molar relationship (P  =  .021). Handicapping malocclusion, maxillary irregularity, and abnormal molar relationship were associated with the occurrence and severity of dental caries. The findings suggest that the prevention and treatment of these conditions can contribute to a reduction in dental caries among adolescents.

  18. Comparisons of ASME-code fatigue-evaluation methods for nuclear Class 1 piping with Class 2 or 3 piping

    International Nuclear Information System (INIS)

    Rodabaugh, E.C.

    1983-06-01

    The fatigue evaluation procedure used in the ASME Boiler and Pressure Vessel Code, Sect. III, Nuclear Power Plant Components, for Class 1 piping is different from the procedure used for Class 2 or 3 piping. The basis for each procedure is described, and correlations between the two procedures are presented. Conditions under which either procedure or both may be unconservative are noted. Potential changes in the Class 2 or 3 piping procedure to explicitly cover all loadings are discussed. However, the report is intended to be informative, and while the contents of the report may guide future Code changes, specific recommendations are not given herein

  19. Social class and parental investment in children

    NARCIS (Netherlands)

    Gauthier, A.H.; Scott, Robert A.; Kosslyn, Stephen M.

    2015-01-01

    This essay critically reviews the literature on social class differences in parental investment in children including differences in (i) parenting practices or behavior; (ii) parenting styles, logics, and strategies; and (iii) parenting values and ideologies. The essay reveals how structural and

  20. Exploring Flipped Classroom Instruction in Calculus III

    Science.gov (United States)

    Wasserman, Nicholas H.; Quint, Christa; Norris, Scott A.; Carr, Thomas

    2017-01-01

    In an undergraduate Calculus III class, we explore the effect of "flipping" the instructional delivery of content on both student performance and student perceptions. Two instructors collaborated to determine daily lecture notes, assigned the same homework problems, and gave identical exams; however, compared to a more traditional…

  1. Differences in serum concentrations of organochlorine compounds by occupational social class in pancreatic cancer

    International Nuclear Information System (INIS)

    Porta, Miquel; Bosch de Basea, Magda; Benavides, Fernando G.; Lopez, Tomas; Fernandez, Esteve; Marco, Esther; Alguacil, Juan; Grimalt, Joan O.; Puigdomenech, Elisa

    2008-01-01

    Background: The relationships between social factors and body concentrations of environmental chemical agents are unknown in many human populations. Some chemical compounds may play an etiopathogenic role in pancreatic cancer. Objective: To analyze the relationships between occupational social class and serum concentrations of seven selected organochlorine compounds (OCs) in exocrine pancreatic cancer: dichlorodiphenyltrichloroethane (p,p'-DDT), dichlorodiphenyldichloroethene (p,p'-DDE), 3 polychlorinated biphenyls (PCBs), hexachlorobenzene, and β-hexachlorocyclohexane. Methods: Incident cases of exocrine pancreatic cancer were prospectively identified, and interviewed face-to-face during hospital admission (n=135). Serum concentrations of OCs were analyzed by high-resolution gas chromatography with electron-capture detection. Social class was classified according to occupation. Results: Multivariate-adjusted concentrations of all seven compounds were higher in occupational social classes IV-V (the less affluent) than in classes I-II; they were higher as well in class III than in classes I-II for four compounds. Concentrations of six OCs were higher in manual workers than in non-manual workers (p<0.05 for PCBs). Social class explained statistically between 3.7% and 5.7% of the variability in concentrations of PCBs, and 2% or less variability in the other OCs. Conclusions: Concentrations of most OCs were higher in the less affluent occupational social classes. In pancreatic cancer the putative causal role of these persistent organic pollutants may not be independent of social class. There is a need to integrate evidence on the contribution of different social processes and environmental chemical exposures to the etiology of pancreatic and other cancers

  2. Oral Rehabilitation With Orthognathic Surgery After Dental Implant Placement for Class III Malocclusion With Skeletal Asymmetry and Posterior Bite Collapse.

    Science.gov (United States)

    Ohba, Seigo; Nakatani, Yuya; Kawasaki, Takako; Tajima, Nobutaka; Tobita, Takayoshi; Yoshida, Noriaki; Sawase, Takashi; Asahina, Izumi

    2015-08-01

    Increasing numbers of older patients are seeking orthognathic surgery to treat jaw deformity. However, orthodontic and orthognathic surgical treatment is difficult in cases without occlusal vertical stop. A 55-year-old man presented with Class III malocclusion and mandibular protrusion including esthetic problems and posterior bite collapse. He underwent dental implant treatment to reconstruct an occlusal vertical stop before orthognathic surgery. His occlusal function and esthetic problems improved after surgery, and his skeletal and occlusal stability has been maintained for 6 years. Dental implant placement at appropriate positions could help to determine the position of the proximal segment at orthognathic surgery and could shorten the time required to restore esthetic and occlusal function. This case demonstrates how skeletal and dental stability can be maintained long after surgery in a patient with jaw deformity and posterior bite collapse.

  3. Class III peroxidases in cellulose deficient cultured maize cells during cell wall remodelling.

    Science.gov (United States)

    Martínez-Rubio, Romina; Acebes, José Luis; Encina, Antonio; Kärkönen, Anna

    2018-02-21

    Maize (Zea mays L.) suspension-cultured cells habituated to a cellulose biosynthesis inhibitor 2,6-dichlorobenzonitrile (DCB) have a modified cell wall, in which the reduction in the cellulose content is compensated by a network of highly cross-linked feruloylated arabinoxylans and the deposition of lignin-like polymers. For both arabinoxylan cross-linking and lignin polymerization, class III peroxidases (POXs) have been demonstrated to have a prominent role. For the first time, a comparative study of POX activity and isoforms in control and cellulose-impaired cells has been addressed, also taking into account their cellular distribution in different compartments. Proteins from the spent medium (SM), soluble cellular (SC), ionically (ICW) and covalently bound cell wall protein fractions were assayed for total and specific peroxidase activity by using coniferyl and sinapyl alcohol and ferulic acid as substrates. The isoPOX profile was obtained by isoelectric focusing. POX activity was higher in DCB-habituated than in non-habituated cells in all protein fractions at all cell culture stages. For all substrates assayed, SC and ICW fractions showed higher activity at the early-log growth phase than at the late-log phase. However, the highest POX activity in the spent medium was found at the late-log phase. According to the isoPOX profiles, the highest diversity of isoPOXs was detected in the ICW and SM protein fractions. The latter fraction contained isoPOXs with higher activity in DCB-habituated cells. Some of the isoPOXs detected could be involved in cross-linking of arabinoxylans and in the lignin-like polymer formation in DCB-habituated cells. This article is protected by copyright. All rights reserved.

  4. "Converting a bi-jaw surgery to a single-jaw surgery:" Posterior maxillary dentoalveolar intrusion with microimplants to avoid the need of a maxillary surgery in the surgical management of skeletal Class III vertical malocclusion

    Directory of Open Access Journals (Sweden)

    Abhisek Ghosh

    2016-01-01

    Full Text Available The management of a vertical skeletal Class III malocclusion with mandibular prognathism revolves around the protocol of bi-jaw surgery (maxillary LeFort I impaction and mandibular bilateral sagittal split osteotomy with setback. The maxillary surgery not only provides increased stability to the ultimate surgical outcome but also increases the amount by which the mandibular set back can be done, therefore aiding in greater profile improvement. With the need of maxillary surgery almost inevitable in treating such situations, the complexity and the increased discomfort associated with such surgery can never be ignored. Is it at all possible to convert a bi-jaw surgery into a single-jaw surgery with the aid of microimplants? With increasing number of patients being treated with microimplants for anterior openbite and gummy smiles, our idea was to incorporate this novel protocol in treating Class III vertical situations and therefore avoid the need of a maxillary surgery in treating such a situation, together with achieving optimum treatment outcome.

  5. The mechanisms of action of E. coli endonuclease III and T4 UV endonuclease (endonuclease V) at AP sites.

    OpenAIRE

    Kim, J; Linn, S

    1988-01-01

    Treatment of DNA containing AP sites with either T4 UV endonuclease or with E. coli endonuclease III followed by a human class II AP endonuclease releases a putative beta-elimination product. This result suggests that both the T4 endonuclease and E. coli endonuclease III class I AP endonucleases catalyze phosphodiester bond cleavage via a lyase- rather than a hydrolase mechanism. Indeed, we have not detected a class I AP endonuclease which hydrolytically catalyzes phosphodiester bond cleavage...

  6. Proporção divina em indivíduos oclusões classes I, II e III esqueléticas em radiografias cefalométricas laterais

    OpenAIRE

    Tomaz Toniello, Priscila; Chicarelli da Silva, Mariliani; Vessoni Iwaki, Lilian Cristina; Arias Provenzano, María Gisette; Mitsunari Takeshita, Wilton

    2014-01-01

    Introdução: o conceito inicial de beleza remete a um conjunto que engloba harmonia e equilíbrio das proporções faciais estabelecidas pelas estruturas esqueléticas, dentárias e de tecidos moles. Objetivo: o objetivo deste estudo foi analisara proporção divina em radiografias cefalométricas laterais de 93 indivíduos brasileiros adultos, acima de 18 anos, de ambos os gêneros, com classes I, II e III esqueléticas, não submetidos a tratamento ortodôntico, por meio do software de cefalometria "Aure...

  7. PCSK1 rs6232 Is Associated with Childhood and Adult Class III Obesity in the Mexican Population

    Science.gov (United States)

    Villalobos-Comparán, Marisela; Villamil-Ramírez, Hugo; Villarreal-Molina, Teresa; Larrieta-Carrasco, Elena; León-Mimila, Paola; Romero-Hidalgo, Sandra; Jacobo-Albavera, Leonor; Liceaga-Fuentes, Adriana E.; Campos-Pérez, Francisco J.; López-Contreras, Blanca E.; Tusié-Luna, Teresa; del Río-Navarro, Blanca E.; Aguilar-Salinas, Carlos A.; Canizales-Quinteros, Samuel

    2012-01-01

    Background Common variants rs6232 and rs6235 in the PCSK1 gene have been associated with obesity in European populations. We aimed to evaluate the contribution of these variants to obesity and related traits in Mexican children and adults. Methodology/Principal Findings Rs6232 and rs6235 were genotyped in 2382 individuals, 1206 children and 1176 adults. Minor allele frequencies were 0.78% for rs6232 and 19.99% for rs6235. Rs6232 was significantly associated with childhood obesity and adult class III obesity (OR = 3.01 95%CI 1.64–5.53; P = 4×10−4 in the combined analysis). In addition, this SNP was significantly associated with lower fasting glucose levels (P = 0.01) and with increased insulin levels and HOMA-B (P = 0.05 and 0.01, respectively) only in non-obese children. In contrast, rs6235 showed no significant association with obesity or with glucose homeostasis parameters in any group. Conclusion/Significance Although rs6232 is rare in the Mexican population, it should be considered as an important risk factor for extreme forms of obesity. PMID:22737226

  8. Ribonucleotide Reductases from Bifidobacteria Contain Multiple Conserved Indels Distinguishing Them from All Other Organisms: In Silico Analysis of the Possible Role of a 43 aa Bifidobacteria-Specific Insert in the Class III RNR Homolog

    Directory of Open Access Journals (Sweden)

    Seema Alnajar

    2017-07-01

    Full Text Available Bifidobacteria comprises an important group/order of bacteria whose members have widespread usage in the food and health industry due to their health-promoting activity in the human gastrointestinal tract. However, little is known about the underlying molecular properties that are responsible for the probiotic effects of these bacteria. The enzyme ribonucleotide reductase (RNR plays a key role in all organisms by reducing nucleoside di- or tri- phosphates into corresponding deoxyribose derivatives required for DNA synthesis, and RNR homologs belonging to classes I and III are present in either most or all Bifidobacteriales. Comparative analyses of these RNR homologs have identified several novel sequence features in the forms of conserved signature indels (CSIs that are exclusively found in bifidobacterial RNRs. Specifically, in the large subunit of the aerobic class Ib RNR, three CSIs have been identified that are uniquely found in the Bifidobacteriales homologs. Similarly, the large subunit of the anaerobic class III RNR contains five CSIs that are also distinctive characteristics of bifidobacteria. Phylogenetic analyses indicate that these CSIs were introduced in a common ancestor of the Bifidobacteriales and retained by all descendants, likely due to their conferring advantageous functional roles. The identified CSIs in the bifidobacterial RNR homologs provide useful tools for further exploration of the novel functional aspects of these important enzymes that are exclusive to these bacteria. We also report here the results of homology modeling studies, which indicate that most of the bifidobacteria-specific CSIs are located within the surface loops of the RNRs, and of these, a large 43 amino acid insert in the class III RNR homolog forms an extension of the allosteric regulatory site known to be essential for protein function. Preliminary docking studies suggest that this large CSI may be playing a role in enhancing the stability of the RNR

  9. Treatment of an adult with a normodivergent, mild skeletal Class III pattern, and a Bolton′s discrepancy using a single mandibular incisor extraction plan

    Directory of Open Access Journals (Sweden)

    Sunjay Suri

    2015-01-01

    Full Text Available A 34½-year-old pathologist with active social and professional interaction sought orthodontic solutions for severe esthetic and functional impairment. She felt due to spaced and protruding maxillary incisors, but had not got treatment previously as she did not want to wear metallic appliances. The diagnosis revealed a skeletal Class III normodivergent pattern with relative mandibular excess tooth material. Treatment with multibracket fixed appliances using ceramic brackets, extraction of a mandibular central incisor, maxillary incisor crown recontouring with interproximal reduction, and using gentle space closure mechanics ameliorated the problems and provided an esthetically pleasing, functionally adequate occlusion with good intercuspation.

  10. Candidate gene analyses of 3-dimensional dentoalveolar phenotypes in subjects with malocclusion

    Science.gov (United States)

    Weaver, Cole A.; Miller, Steven F.; da Fontoura, Clarissa S. G.; Wehby, George L.; Amendt, Brad A.; Holton, Nathan E.; Allareddy, Veeratrishul; Southard, Thomas E.; Moreno Uribe, Lina M.

    2017-01-01

    Introduction Genetic studies of malocclusion etiology have identified 4 deleterious mutations in genes, DUSP6, ARHGAP21, FGF23, and ADAMTS1 in familial Class III cases. Although these variants may have large impacts on Class III phenotypic expression, their low frequency (malocclusions. Thus, much of the genetic variation underlying the dentofacial phenotypic variation associated with malocclusion remains unknown. In this study, we evaluated associations between common genetic variations in craniofacial candidate genes and 3-dimensional dentoalveolar phenotypes in patients with malocclusion. Methods Pretreatment dental casts or cone-beam computed tomographic images from 300 healthy subjects were digitized with 48 landmarks. The 3-dimensional coordinate data were submitted to a geometric morphometric approach along with principal component analysis to generate continuous phenotypes including symmetric and asymmetric components of dentoalveolar shape variation, fluctuating asymmetry, and size. The subjects were genotyped for 222 single-nucleotide polymorphisms in 82 genes/loci, and phenotpye-genotype associations were tested via multivariate linear regression. Results Principal component analysis of symmetric variation identified 4 components that explained 68% of the total variance and depicted anteroposterior, vertical, and transverse dentoalveolar discrepancies. Suggestive associations (P eruptions. Suggestive associations were found with TBX1 AJUBA, SNAI3 SATB2, TP63, and 1p22.1. Fluctuating asymmetry was associated with BMP3 and LATS1. Associations for SATB2 and BMP3 with asymmetric variations remained significant after the Bonferroni correction (P malocclusions were identified. PMID:28257739

  11. Toxicological studies and antimicrobial properties of some Iron(III ...

    African Journals Online (AJOL)

    SERVER

    2007-12-17

    Dec 17, 2007 ... Two iron(III) complexes of Ciprofloxacin were synthesized by reaction of the ... The infrared spectra suggest that two classes of compounds were obtained: molecular complex in .... Soluble in H2O, MeOH, EtOH; Mol. cond.

  12. BtcA, A class IA type III chaperone, interacts with the BteA N-terminal domain through a globular/non-globular mechanism.

    Directory of Open Access Journals (Sweden)

    Chen Guttman

    Full Text Available Bordetella pertussis, the etiological agent of "whooping cough" disease, utilizes the type III secretion system (T3SS to deliver a 69 kDa cytotoxic effector protein, BteA, directly into the host cells. As with other T3SS effectors, prior to its secretion BteA binds BtcA, a 13.9 kDa protein predicted to act as a T3SS class IA chaperone. While this interaction had been characterized for such effector-chaperone pairs in other pathogens, it has yet to be fully investigated in Bordetella. Here we provide the first biochemical proof that BtcA is indeed a class IA chaperone, responsible for the binding of BteA's N-terminal domain. We bring forth extensive evidence that BtcA binds its substrate effector through a dual-interface binding mechanism comprising of non-globular and bi-globular interactions at a moderate micromolar level binding affinity. We demonstrate that the non-globular interactions involve the first 31 N-terminal residues of BteA287 and their removal leads to destabilization of the effector-chaperone complex and lower binding affinities to BtcA. These findings represent an important first step towards a molecular understanding of BteA secretion and cell entry.

  13. Increased prevalence of VNTR III of the insulin gene in women with gestational diabetes mellitus (GDM).

    Science.gov (United States)

    Litou, Hariklia; Anastasiou, Eleni; Thalassinou, Louminitsa; Sarika, Helen-Leda; Philippou, George; Alevizaki, Maria

    2007-05-01

    The VNTR polymorphism in the promoter region of the insulin gene (INS-VNTR) affects transcription rate and has been associated with insulin resistance and DM2. Gestational diabetes mellitus (GDM) is a multifactorial disorder, where both impaired insulin secretion and action may be involved. The aim of the study was to examine the distribution of the INS-VNTRs in women with GDM and to investigate possible associations with features of beta cell function and glycaemic control in this population. One hundred and sixty-one women with GDM and 111 normal pregnant women (n) were genotyped for INS-VNTR during the 24th-32nd pregnancy week. Glucose and insulin levels were determined during the diagnostic OGTT. The majority of the previous GDM women were also examined at 3-6 months post-partum. VNTR class III/III genotype was significantly more frequent in the GDM group 8.7% versus 2.7%, p=0.02 giving an OR of 3.97 (1.1-14.29). An increased frequency of the VNTR class III allele was found in those GDM women who required insulin for treatment compared to those controlled with diet alone (12.4% versus 4%, pwomen homozygous for the class III allele without reaching statistical significance (p=0.09). The INS-VNTR class III is more frequent in women who develop GDM, and may be associated with decreased ability of the beta cell to meet the increased insulin requirements as reflected by the need for insulin supplementation for adequate glycaemic control.

  14. Perubahan Posisi Mandibula pada Perawatan Kamuflase Maloklusi Kelas III Skeletal

    Directory of Open Access Journals (Sweden)

    Sri Hartati

    2013-12-01

    Full Text Available Maloklusi kelas III skeletal pada umumnya memiliki hubungan rahang yang prognatik, yaitu mandibula terletak lebih maju dari maksila. Perawatan kamuflase non pembedahan pada pasien dewasa dengan maloklusi kelas III memerlukan pencabutan dua gigi premolar mandibula atau empat gigi premolar untuk memberikan ruang retraksi  gigi incisivus mandibula. Prinsip perawatan teknik Begg adalah mekanisme gaya differensial dengan menggunakan gaya yang ringan dan kontinyu. Penggunaan   elastik intermaksiler kelas III menyebabkan ekstrusi gigi molar atas, retrusi gigi insisivus bawah, rotasi mandibula searah jarum jam dan perubahan posisi kondilus. Penelitian ini bertujuan untuk mengetahui perubahan linier dan anguler posisi mandibula pada perawatan kamuflase  maloklusi kelas III skeletal setelah dilakukan perawatan ortodontik dengan teknik Begg. Penelitian dilakukan pada 20 pasang sefalogram lateral dari subjek laki-laki dan perempuan usia 18-25 tahun yang memenuhi kriteria penelitian. Seluruh subjek yang dirawat dengan teknik Begg disertai pencabutan dua gigi premolar pertama bawah. Perubahan posisi mandibula ditentukan  dengan perubahan   titik Pg dan Pg. terhadap sumbu X dan sumbu Y sedangkan perubahan anguler dengan melihat perubahan sudut Y-axis. Data yang diperoleh dianalisisi dengan paired t test. Hasil penelitian perubahan posisi mandibula setelah perawatan ortodontik kamuflase  dengan alat cekat teknik Begg menunjukkan perubahan  yang bermakna (p<0,05.  Titik  Pg mengalami pergeseran ke arah posterior  dan inferior dan sudut Y-axis  mengalami peningkatan berarti terjadi rotasi searah jarum jam. Skeletal Class III malocclusion generally has prognatic jaw relationship. The mandibular is more forward than the maxilla. Camouflage non-surgical treatment in adult patients with Class III malocclusion required extraction of two mandibular premolars or four premolar teeth to give a space of mandibular incisors teeth retraction. The Begg technique

  15. Biology of biomechanics: Finite element analysis of a statically determinate system to rotate the occlusal plane for correction of a skeletal Class III open-bite malocclusion.

    Science.gov (United States)

    Roberts, W Eugene; Viecilli, Rodrigo F; Chang, Chris; Katona, Thomas R; Paydar, Nasser H

    2015-12-01

    In the absence of adequate animal or in-vitro models, the biomechanics of human malocclusion must be studied indirectly. Finite element analysis (FEA) is emerging as a clinical technology to assist in diagnosis, treatment planning, and retrospective analysis. The hypothesis tested is that instantaneous FEA can retrospectively simulate long-term mandibular arch retraction and occlusal plane rotation for the correction of a skeletal Class III malocclusion. Seventeen published case reports were selected of patients treated with statically determinate mechanics using posterior mandible or infrazygomatic crest bone screw anchorage to retract the mandibular arch. Two-dimensional measurements were made for incisor and molar movements, mandibular arch rotation, and retraction relative to the maxillary arch. A patient with cone-beam computed tomography imaging was selected for a retrospective FEA. The mean age for the sample was 23.3 ± 3.3 years; there were 7 men and 10 women. Mean incisor movements were 3.35 ± 1.55 mm of retraction and 2.18 ± 2.51 mm of extrusion. Corresponding molar movements were retractions of 4.85 ± 1.78 mm and intrusions of 0.85 ± 2.22 mm. Retraction of the mandibular arch relative to the maxillary arch was 4.88 ± 1.41 mm. Mean posterior rotation of the mandibular arch was -5.76° ± 4.77° (counterclockwise). The mean treatment time (n = 16) was 36.2 ± 15.3 months. Bone screws in the posterior mandibular region were more efficient for intruding molars and decreasing the vertical dimension of the occlusion to close an open bite. The full-cusp, skeletal Class III patient selected for FEA was treated to an American Board of Orthodontics Cast-Radiograph Evaluation score of 24 points in about 36 months by en-masse retraction and posterior rotation of the mandibular arch: the bilateral load on the mandibular segment was about 200 cN. The mandibular arch was retracted by about 5 mm, posterior rotation was about 16.5°, and molar intrusion was about 3

  16. Nitrato-complexes of Y(III), La(III), Ce(III), Pr(III), Nd(III), Sm(III), Gd(III), Tb(III), Dy(III) and Ho(III) with 2-(2'-pyridyl) benzimidazole

    Energy Technology Data Exchange (ETDEWEB)

    Mishra, A; Singh, M P; Singh, V K

    1982-05-01

    The nitrato-complexes, (Y(PyBzH)/sub 2/(NO/sub 3/)/sub 2/)NO/sub 3/.H/sub 2/O and Nd, Sm, Gd, Tb, Dy, Ho ; n=1-3, m=0-0.5 ; PyBzh=2-(2 -pyridyl)benzimidazole) are formed on interaction of the ligand with metal nitrates in ethanol. The electrical conductance values (116-129 ohm/sup -1/cm/sup 2/mol/sup -1/) suggest 1:1 electrolyte-nature of the complexes. Magnetic moment values of Ce(2.53 B.M.), Pr(3.62 B.M.), Nd(3.52 B.M.), Sm(1.70 B.M.), Gd(8.06 B.M.), Tb(9.44 B.M.), Dy(10.56 B.M.) and Ho(10.51 B.M.) in the complexes confirm the positive state of the metals. Infrared evidences are obtained for the existance of both coordinated (C/sub 2/v) and uncoordinated (D/sub 3/h) nitrate groups. Electronic absorption spectra of Pr(III)-, Nd(III)-, Sm(III)-, Tb(III)-, Dy(III)- and Ho(III)-complexes have been analysed in the light of LSJ terms.

  17. Nitrato-complexes of Y(III), La(III), Ce(III), Pr(III), Nd(III), Sm(III), Gd(III), Tb(III), Dy(III) and Ho(III) with 2-(2'-pyridyl) benzimidazole

    International Nuclear Information System (INIS)

    Mishra, A.; Singh, M.P.; Singh, V.K.

    1982-01-01

    The nitrato-complexes, [Y(PyBzH) 2 (NO 3 ) 2 ]NO 3 .H 2 O and Nd, Sm, Gd, Tb, Dy, Ho ; n=1-3, m=0-0.5 ; PyBzh=2-(2 -pyridyl)benzimidazole] are formed on interaction of the ligand with metal nitrates in ethanol. The electrical conductance values (116-129 ohm -1 cm 2 mol -1 ) suggest 1:1 electrolyte-nature of the complexes. Magnetic moment values of Ce(2.53 B.M.), Pr(3.62 B.M.), Nd(3.52 B.M.), Sm(1.70 B.M.), Gd(8.06 B.M.), Tb(9.44 B.M.), Dy(10.56 B.M.) and Ho(10.51 B.M.) in the complexes confirm the terpositive state of the metals. Infrared evidences are obtained for the existance of both coordinated (C 2 v) and uncoordinated (D 3 h) nitrate groups. Electronic absorption spectra of Pr(III)-, Nd(III)-, Sm(III)-, Tb(III)-, Dy(III)- and Ho(III)-complexes have been analysed in the light of LSJ terms. (author)

  18. Application of Advanced Reservoir Characterization, Simulation, and Production Optimization Strategies to Maximize Recovery in Slope and Basin Clastic Reservoirs, West Texas (Delaware Basin), Class III

    Energy Technology Data Exchange (ETDEWEB)

    Dutton, Shirley P.; Flanders, William A.

    2001-11-04

    The objective of this Class III project was demonstrate that reservoir characterization and enhanced oil recovery (EOR) by CO2 flood can increase production from slope and basin clastic reservoirs in sandstones of the Delaware Mountain Group in the Delaware Basin of West Texas and New Mexico. Phase 1 of the project, reservoir characterization, focused on Geraldine Ford and East Ford fields, which are Delaware Mountain Group fields that produce from the upper Bell Canyon Formation (Ramsey sandstone). The demonstration phase of the project was a CO2 flood conducted in East Ford field, which is operated by Orla Petco, Inc., as the East Ford unit.

  19. In vitro Comparative Evaluation of Various Restorative Materials used for restoring Class III Cavities in Deciduous Anterior Teeth: A Clinical Study.

    Science.gov (United States)

    Priyank, Harsh; Verma, Ankita; Gupta, Komal; Chaudhary, Esha; Khandelwal, Deepak; Nihalani, Shweta

    2016-12-01

    Beauty standards in today's modernized world scenario are formed by well-aligned and well-designed bright white teeth. One of the major reasons behind patients reporting to dental clinics is pain. Caries in the anterior primary teeth forms one of the major concerns from a restorative point of view. Very few studies are quoted in literature which stresses on the follow-up of anterior restorations in primary teeth. Hence, we evaluated and compared the efficacy of composite resin and resin-modified glass ionomer cement (RGIC) for class III restorations in primary anterior teeth. The present study was conducted in the pediatric dental wing and included a total of 80 patients aged 3 to 5½ years who reported with the chief complaint of carious lesions in the primary anterior teeth. Patients having minimal of a pair of similar appearing small carious lesions on the same proximal surfaces of the deciduous maxillary incisors were included for the study. All the patients were randomly divided into two groups: One in which RGIC restoration was done and other in which composite restoration was done. Cavity preparation was done and filling of the cavity with the restorative materials was carried out. Assessment of the restorations was done at 4, 8, and 12 months time following criteria given by Ryge et al. All the results were analyzed by Statistical Package for the Social Sciences (SPSS) software. Mann-Whitney test and one-way analysis of variance (ANOVA) were used to evaluate the level of significance; p value less than 0.05 was considered as significant. For composite and RGIC restorations, the mean score for anatomic shape was 1.21 and 1.10 respectively. While comparing the clinical parameters, nonsignificant results were obtained between composite and RGIC restorative materials at 4-, 8-, and 12-month interval. On comparing the clinical parameters for individual restorative materials at different time intervals, statistically significant results were obtained only for

  20. Effects of early activator treatment in patients with class II malocclusion evaluated by thin-plate spline analysis.

    Science.gov (United States)

    Lux, C J; Rübel, J; Starke, J; Conradt, C; Stellzig, P A; Komposch, P G

    2001-04-01

    The aim of the present longitudinal cephalometric study was to evaluate the dentofacial shape changes induced by activator treatment between 9.5 and 11.5 years in male Class II patients. For a rigorous morphometric analysis, a thin-plate spline analysis was performed to assess and visualize dental and skeletal craniofacial changes. Twenty male patients with a skeletal Class II malrelationship and increased overjet who had been treated at the University of Heidelberg with a modified Andresen-Häupl-type activator were compared with a control group of 15 untreated male subjects of the Belfast Growth Study. The shape changes for each group were visualized on thin-plate splines with one spline comprising all 13 landmarks to show all the craniofacial shape changes, including skeletal and dento-alveolar reactions, and a second spline based on 7 landmarks to visualize only the skeletal changes. In the activator group, the grid deformation of the total spline pointed to a strong activator-induced reduction of the overjet that was caused both by a tipping of the incisors and by a moderation of sagittal discrepancies, particularly a slight advancement of the mandible. In contrast with this, in the control group, only slight localized shape changes could be detected. Both in the 7- and 13-landmark configurations, the shape changes between the groups differed significantly at P thin-plate spline analysis turned out to be a useful morphometric supplement to conventional cephalometrics because the complex patterns of shape change could be suggestively visualized.

  1. More on fatigue verification of Class 1 nuclear power piping according to ASME BPV III NB-3600

    International Nuclear Information System (INIS)

    Zeng, Lingfu; Dahlström, Lars; Jansson, Lennart G.

    2011-01-01

    In this paper, fatigue verification of Class 1 nuclear power piping according to ASME Boiler and Pressure Vessel Code, Section III, NB-3600, and relevant issues that are often discussed in connection to the power uprate of several Swedish BWR reactors in recent years, are dealt with. Key parameters involved in the fatigue verification, i.e. the alternating stress intensity S alt , the penalty factor K e and the cumulative damage factor U, and relevant computational procedures applicable for the assessment of low-cycle fatigue failure using strain-controlled data, are particularly addressed. A so-called simplified elastic-plastic discontinuity analysis for alternative verification when basic fatigue requirements found unsatisfactory, and the procedures provided in NB-3600 for evaluating the alternating stress intensity S alt , are reviewed in detail. Our emphasis is placed on other procedures alternative to the simplified elastic-plastic discontinuity analysis. A more in-depth discussion is given to an alternative suggested earlier by the authors using nonlinear finite element analyses. This paper is a continuation of our work presented in ICONE16/17/18, which attempted to categorize design rules in the code into linear design rules and non-linear design rules and to clarify corresponding design requirements and finite element analyses, in particular, those non-linear ones. (author)

  2. Class 1 devices case studies in medical devices design

    CERN Document Server

    Ogrodnik, Peter J

    2014-01-01

    The Case Studies in Medical Devices Design series consists of practical, applied case studies relating to medical device design in industry. These titles complement Ogrodnik's Medical Device Design and will assist engineers with applying the theory in practice. The case studies presented directly relate to Class I, Class IIa, Class IIb and Class III medical devices. Designers and companies who wish to extend their knowledge in a specific discipline related to their respective class of operation will find any or all of these titles a great addition to their library. Class 1 Devices is a companion text to Medical Devices Design: Innovation from Concept to Market. The intention of this book, and its sister books in the series, is to support the concepts presented in Medical Devices Design through case studies. In the context of this book the case studies consider Class I (EU) and 510(k) exempt (FDA) . This book covers classifications, the conceptual and embodiment phase, plus design from idea to PDS. These title...

  3. Study on Tensile Fatigue Behavior of Thermal Butt Fusion in Safety Class III High-Density Polyethylene Buried Piping in Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jong Sung; Lee, Young Ju [Sunchon National University, Suncheon (Korea, Republic of); Oh, Young Jin [KEPCO E and C, Yongin (Korea, Republic of)

    2015-01-15

    High-density polyethylene (HDPE) piping, which has recently been applied to safety class III piping in nuclear power plants, can be butt-joined through the thermal fusion process, which heats two fused surfaces and then subject to axial pressure. The thermal fusion process generates bead shapes on the butt fusion. The stress concentrations caused by the bead shapes may reduce the fatigue lifetime. Thus, investigating the effect of the thermal butt fusion beads on fatigue behavior is necessary. This study examined the fatigue behavior of thermal butt fusion via a tensile fatigue test under stress-controlled conditions using finite element elastic stress analysis. Based on the results, the presence of thermal butt fusion beads was confirmed to reduce the fatigue lifetime in the low-cycle fatigue region while having a negligible effect in the medium- and high-cycle fatigue regions.

  4. Study on Tensile Fatigue Behavior of Thermal Butt Fusion in Safety Class III High-Density Polyethylene Buried Piping in Nuclear Power Plants

    International Nuclear Information System (INIS)

    Kim, Jong Sung; Lee, Young Ju; Oh, Young Jin

    2015-01-01

    High-density polyethylene (HDPE) piping, which has recently been applied to safety class III piping in nuclear power plants, can be butt-joined through the thermal fusion process, which heats two fused surfaces and then subject to axial pressure. The thermal fusion process generates bead shapes on the butt fusion. The stress concentrations caused by the bead shapes may reduce the fatigue lifetime. Thus, investigating the effect of the thermal butt fusion beads on fatigue behavior is necessary. This study examined the fatigue behavior of thermal butt fusion via a tensile fatigue test under stress-controlled conditions using finite element elastic stress analysis. Based on the results, the presence of thermal butt fusion beads was confirmed to reduce the fatigue lifetime in the low-cycle fatigue region while having a negligible effect in the medium- and high-cycle fatigue regions

  5. Th(As(III)4As(V)4O18): a mixed-valent oxoarsenic(III)/arsenic(V) actinide compound obtained under extreme conditions.

    Science.gov (United States)

    Yu, Na; Klepov, Vladislav V; Kegler, Philip; Bosbach, Dirk; Albrecht-Schmitt, Thomas E; Alekseev, Evgeny V

    2014-08-18

    A high-temperature/high-pressure method was employed to investigate phase formation in the Th(NO3)4·5H2O-As2O3-CsNO3 system. It was observed that an excess of arsenic(III) in starting system leads to the formation of Th(As(III)4As(V)4O18), which is representative of a rare class of mixed-valent arsenic(III)/arsenic(V) compounds. This compound was studied with X-ray diffraction, energy-dispersive X-ray, and Raman spectroscopy methods. Crystallographic data show that Th(As(III)4As(V)4O18) is built from (As(III)4As(V)4O18)(4-) layers connected through Th atoms. The arsenic layers are found to be isoreticular to those in previously reported As2O3 and As3O5(OH), and the geometric differences between them are discussed. Bands in the Raman spectrum are assigned with respect to the presence of AsO3 and AsO4 groups.

  6. Social class, dementia and the fourth age.

    Science.gov (United States)

    Jones, Ian Rees

    2017-02-01

    Research addressing social class and dementia has largely focused on measures of socioeconomic status as causal risk factors for dementia and in observed differences in diagnosis, treatment and care. This large body of work has produced important insights but also contains numerous problems and weaknesses. Research needs to take account of the ways in which ageing and social class have been transformed in tandem with the economic, social and cultural coordinates of late modernity. These changes have particular consequences for individual identities and social relations. With this in mind this article adopts a critical gaze on research that considers interactions between dementia and social class in three key areas: (i) epidemiological approaches to inequalities in risk (ii) the role of social class in diagnosis and treatment and (iii) class in the framing of care and access to care. Following this, the article considers studies of dementia and social class that focus on lay understandings and biographical accounts. Sociological insights in this field come from the view that dementia and social class are embedded in social relations. Thus, forms of distinction based on class relations may still play an important role in the lived experience of dementia. © 2017 Foundation for the Sociology of Health & Illness.

  7. Conversion between Addenbrooke's Cognitive Examination III and Mini-Mental State Examination.

    Science.gov (United States)

    Matías-Guiu, Jordi A; Pytel, Vanesa; Cortés-Martínez, Ana; Valles-Salgado, María; Rognoni, Teresa; Moreno-Ramos, Teresa; Matías-Guiu, Jorge

    2017-12-10

    We aim to provide a conversion between Addenbrooke's Cognitive Examination III (ACE-III) and Mini-Mental State Examination (MMSE) scores, to predict the MMSE result based on ACE-III, thus avoiding the need for both tests, and improving their comparability. Equipercentile equating method was used to elaborate a conversion table using a group of 400 participants comprising healthy controls and Alzheimer's disease (AD) patients. Then, reliability was assessed in a group of 100 healthy controls and patients with AD, 52 with primary progressive aphasia and 22 with behavioral variant frontotemporal dementia. The conversion table between ACE-III and MMSE denoted a high reliability, with intra-class correlation coefficients of 0.940, 0.922, and 0.902 in the groups of healthy controls and AD, behavioral variant frontotemporal dementia, and primary progressive aphasia, respectively. Our conversion table between ACE-III and MMSE suggests that MMSE may be estimated based on the ACE-III score, which could be useful for clinical and research purposes.

  8. Summary of design of nuclear vessels and piping to ASME III (NB, NC, ND) and vessels to BS 5500

    International Nuclear Information System (INIS)

    Harrop, L.P.

    1992-01-01

    There is a hierarchy of design code requirements for pressurised components, starting with non-nuclear codes as the minimum and progressing through the ASME III nuclear Classes 3, 2, 1. In establishing and assessing the safety justifications of nuclear plants it is important to have an appreciation of the gradation of requirements in the ASME III design rules and how these go beyond non-nuclear component design rules. There are two broad aspects to the structural integrity of pressurised components, namely the achievement of integrity and the demonstration of integrity. The technical requirements of design codes are associated with achieving integrity while the documentary aspects are usually associated with demonstrating integrity. In practice documents also have a part in achieving integrity in the communication of information between different organisations and personnel involved in the design process. It is not possible to assign simple numerical measures to the relative integrity afforded by non-nuclear codes and the three Classes of ASME III. Instead it is necessary to compare the different requirements of the rules for the various technical and documentary aspects. This paper summarises the most important technical and documentary aspects of the three Classes of the ASME III Code for vessels and the non-nuclear code BS 5500. A similar summary is also provided for the three Classes of ASME III rules for piping. The intention is that the paper provides a basis for appreciating the relative integrity afforded by these various rules. (author)

  9. Angle Class I malocclusion treated with lower incisor extraction.

    Science.gov (United States)

    Barbosa, Vanessa Leal Tavares

    2013-01-01

    In planning orthodontic cases that include extractions as an alternative to solve the problem of negative space discrepancy, the critical decision is to determine which teeth will be extracted. Several aspects must be considered, such as periodontal health, orthodontic mechanics, functional and esthetic alterations, and treatment stability. Despite controversies, extraction of teeth to solve dental crowding is a therapy that has been used for decades. Premolar extractions are the most common, but there are situations in which atypical extractions facilitate mechanics, preserve periodontal health and favor maintenance of the facial profile, which tends to unfavorably change due to facial changes with age. The extraction of a lower incisor, in selected cases, is an effective approach, and literature describes greater post-treatment stability when compared with premolar extractions. This article reports the clinical case of a patient with Angle Class I malocclusion and upper and lower anterior crowding, a balanced face and harmonious facial profile. The presence of gingival and bone recession limited large orthodontic movements. The molars and premolars were well occluded, and the discrepancy was mainly concentrated in the anterior region of the lower dental arch. The extraction of a lower incisor in the most ectopic position and with compromised periodontium, associated with interproximal stripping in the upper and lower arches, was the alternative of choice for this treatment, which restored function, providing improved periodontal health, maintained facial esthetics and allowed finishing with a stable and balanced occlusion. This case was presented to the Brazilian Board of Orthodontics and Dentofacial Orthopedics (BBO), as part of the requirements for obtaining the BBO Diplomate title.

  10. Systematic review of the surgery-first approach in orthognathic surgery

    Directory of Open Access Journals (Sweden)

    Chiung Shing Huang

    2014-08-01

    Full Text Available The surgery-first approach in orthognathic surgery has recently created a broader interest in completely eliminating time-consuming preoperative orthodontic treatment. Available evidence on the surgery-first approach should be appraised to support its use in orthognathic surgery. A MEDLINE search using the keywords "surgery first" and "orthognathic surgery" was conducted to select studies using the surgery-first approach. We also manually searched the reference list of the selected keywords to include articles not selected by the MEDLINE search. The search identified 18 articles related to the surgery-first approach. There was no randomized controlled clinical trial. Four papers were excluded as the content was only personal opinion or basic scientific research. Three studies were retrospective cohort studies in nature. The other 11 studies were case reports. For skeletal Class III surgical correction, the final long-term outcomes for maxillofacial and dental relationship were not significantly different between the surgery-first approach and the orthodontics-first approach in transverse (e.g., intercanine or intermolar width dimension, vertical (e.g., anterior open bite, lower anterior facial height dimension, and sagittal (e.g., anterior-posterior position of pogonion and lower incisors dimension. Total treatment duration was substantially shorter in cases of surgery-first approach use. In conclusion, most published studies related to the surgery-first approach were mainly on orthognathic correction of skeletal Class III malocclusion. Both the surgery-first approach and orthodontics-first approach had similar long-term outcomes in dentofacial relationship. However, the surgery-first approach had shorter treatment time.

  11. Change in Posterior Pharyngeal Space After Counterclockwise Rotational Orthognathic Surgery for Class II Dentofacial Deformity Diagnosed With Obstructive Sleep Apnea Based on Cephalometric Analysis.

    Science.gov (United States)

    Jeong, Woo Shik; Kim, Young Chul; Chung, Yoo Sam; Lee, Chang Yeol; Choi, Jong Woo

    2017-07-01

    Although maxillomandibular advancement (MMA) is an orthognathic surgical procedure used to manage obstructive sleep apnea (OSA) in individuals who are noncompliant with continuous positive airway pressure therapy, simple MMA encounters problems in terms of aesthetic outcomes in Asian populations with preexisting dentoalveolar protrusion. Our current prospective investigation describes changes in posterior pharyngeal space and aesthetic outcomes after counterclockwise rotational orthognathic surgery, which is known to be quite difficult in terms of the maintenance of the skeletal stability in skeletal class II patients with OSA. This prospective study investigated the surgical outcome of patients who suffered from OSA following counterclockwise rotational orthognathic surgery. The patients were skeletal class II patients who underwent orthognathic surgery between March 2013 and December 2014. Cephalometric posterior airway analysis and a questionnaire for facial perception were used to assess pharyngeal airway and patient perception of facial appearance. A total of 14 patients were included. Satisfactory results were achieved without complications in all OSA patients. The airway parameters for anteroposterior length significantly increased. Thirteen patients answered a questionnaire on their facial appearance, and the visual analog scale averaged 7.31 points, indicating a favorable facial appearance. Counterclockwise rotational orthognathic surgery without maxilla advancement for the correction of OSA can effectively increase the posterior pharyngeal space, with favorable aesthetic results. With thoughtful application, this novel approach may be an alternative to standard approaches for the correction of OSA using orthognathic surgery.

  12. ARIES-III divertor engineering design

    International Nuclear Information System (INIS)

    Wong, C.P.C.; Schultz, K.R.; Cheng, E.T.; Grotz, S.; Hasan, M.A.; Najmabadi, F.; Sharafat, S.; Herring, J.S.; Valenti, M.; Steiner, D.

    1992-01-01

    This paper reports the engineering design of the ARIES-III double- null divertor. The divertor coolant tubes are made from W-3Re alloy and cooled by subcooled flow boiling of organic coolant. A coating of 4 mm thick tungsten is plasma sprayed onto the divertor surface. This W layer can withstand the thermal deposition of a few disruptions. At a maximum surface heat flux of 5.4 MW/m 2 , a conventional divertor design can be used. The divertor surface is contoured to have a constant heat flux of 5.4 MW/m 2 . The net erosion of the W-surface was found to be negligible at about 0.1 mm/year. After 3 years of operation, the W-3Re alloy ARIES-III divertor can be disposed of as Class A waste. In order to control the prompt dose release at site boundary to less than 200 Rem, isotopic tailoring of the W-alloy will be needed

  13. ARIES-III divertor engineering design

    Energy Technology Data Exchange (ETDEWEB)

    Wong, C.P.C.; Schultz, K.R. [General Atomics, San Diego, CA (United States); Cheng, E.T. [TSI Research, Solana Beach, CA (United States); Grotz, S.; Hasan, M.A.; Najmabadi, F.; Sharafat, S. [California Univ., Los Angeles, CA (United States). Dept. of Mechanical, Aerospace and Nuclear Engineering; Brooks, J.N.; Ehst, D.A.; Sze, D.K. [Argonne National Lab., IL (United States); Herring, J.S. [EG and G Idaho, Inc., Idaho Falls, ID (United States); Valenti, M.; Steiner, D. [Rensselaer Polytechnic Inst., Troy, NY (United States). Plasma Dynamics Lab.

    1992-01-01

    This paper reports the engineering design of the ARIES-III double- null divertor. The divertor coolant tubes are made from W-3Re alloy and cooled by subcooled flow boiling of organic coolant. A coating of 4 mm thick tungsten is plasma sprayed onto the divertor surface. This W layer can withstand the thermal deposition of a few disruptions. At a maximum surface heat flux of 5.4 MW/m{sup 2}, a conventional divertor design can be used. The divertor surface is contoured to have a constant heat flux of 5.4 MW/m{sup 2}. The net erosion of the W-surface was found to be negligible at about 0.1 mm/year. After 3 years of operation, the W-3Re alloy ARIES-III divertor can be disposed of as Class A waste. In order to control the prompt dose release at site boundary to less than 200 Rem, isotopic tailoring of the W-alloy will be needed.

  14. LOFT blowdown loop piping thermal analysis Class I review

    International Nuclear Information System (INIS)

    Kinnaman, T.L.

    1978-01-01

    In accordance with ASME Code, Section III requirements, all analyses of Class I components must be independently reviewed. Since the LOFT blowdown loop piping up through the blowdown valve is a Class I piping system, the thermal analyses are reviewed. The Thermal Analysis Branch comments to this review are also included. It is the opinion of the Thermal Analysis Branch that these comments satisfy all of the reviewers questions and that the analyses should stand as is, without additional considerations in meeting the ASME Code requirements and ANC Specification 60139

  15. Class III antiarrhythmic agents in cardiac failure: lessons from clinical trials with a focus on the Grupo de Estudio de la Sobrevida en la Insuficiencia Cardiaca en Argentina (GESICA).

    Science.gov (United States)

    Doval, H C

    1999-11-04

    The results of previous clinical trials, in a variety of clinical settings, showed that class I agents may consistently increase mortality in sharp contrast to the effects of beta blockers. Attention has therefore shifted to class III compounds for potential beneficial effects on long-term mortality among patients with underlying cardiac disease. Clinical trials with d-sotalol, the dextro isomer (devoid of beta blockade) of sotalol, showed increased mortality in patients with low ejection fraction after myocardial infarction and in those with heart failure; whereas in the case of dofetilide, the impact on mortality was neutral. Because of the complex effects of its actions as an alpha-adrenergic blocker and a class III agent, the impact on mortality of amiodarone in patients with heart failure is of particular interest. A meta-analysis of 13 clinical trials revealed significant reductions in all-cause and cardiac mortality among patients with heart failure or previous myocardial infarction. Among these were 5 controlled clinical trials that investigated the effects of amiodarone on mortality among patients with heart failure. None of these trials was large relative to the beta-blocker trials in the postinfarction patients. However, the larger 2 of the 5 amiodarone trials produced discordant effects on mortality, neutral in one and significantly positive in the other. Some of the differences may be accounted for by the differences in eligibility criteria and baseline characteristics. Future trials that may be undertaken to resolve the discrepancies may need to allow for the newer findings on the effects of concomitant beta blockers, implantable devices, and possibly, spironolactone. All these modalities of treatment have been shown in controlled clinical trials to augment survival in patients with impaired ventricular function or manifest heart failure. Additional trials, some of which are currently in progress, compare amiodarone with implantable devices and other

  16. Positive inotropic effects of RP 62719, a new pure class III antiarrhythmic agent, on guinea pig myocardium.

    Science.gov (United States)

    Beregi, J P; Escande, D; Coudray, N; Mery, P; Mestre, M; Chemla, D; Lecarpentier, Y

    1992-12-01

    The mechanical effects of RP 62719 [(-)1-[-2-(3,4-dihydro-2H-1- benzopyran-4-yl)ethyl]-4-(3,4-dimethoxyphenyl)-piperidine] were tested in vitro on guinea pig left ventricular papillary muscle. RP 62719 is a novel pure class III antiarrhythmic agent known to prolong the cardiac action potential duration by selectively blocking the inward rectifying K+ current. Mechanical parameters were determined from contraction and relaxation phases under isotonic and isometric conditions. At a concentration of 0.02 microM, RP 62719 did not produce significant effects on inotropy or lusitropy. At 0.2 and 2 microM, the drug improved contraction under both heavy and low loading conditions, as evidenced by a 30% increase in maximum unloaded shortening velocity (Vmax, P delta L, P force normalized per cross-sectional area (AF/s, P force derivative per mm2 (+dF/s, P force derivative per mm2 (-dF/s, P < .001). At a higher concentration (20 microM), effects of RP 62719 on inotropy and lusitropy were less marked, thus accounting for the bell-shaped form of the dose-response curve. An increase in the extracellular Ca++ concentration from 2.5 to 3.75 mM improved inotropy to a similar extent (+30-50%) as did 2 microM RP 62719. However, lusitropy and mechanical coupling between contraction and relaxation were not modified in the same proportion under RP 62719 and under 3.75 mM Ca++.(ABSTRACT TRUNCATED AT 250 WORDS)

  17. Isothiocyanato complexes of Gd(III), Tb(III), Dy(III) and Ho(III) with 2-(2'-pyridyl)benzimidazole

    Energy Technology Data Exchange (ETDEWEB)

    Mishra, A; Singh, V K

    1982-01-01

    Six-coordinated complexes of the type (Ln(PyBzH)/sub 2/NCS.H/sub 2/O) (NCS)/sub 2/.nH/sub 2/O/mC/sub 2/H/sub 5/OH (Ln = Gd(III), Tb(III), Dy(III) and Ho(III), n=1-2; m=1) have been prepared from Ln(NCS)/sub 6//sup 3 -/. The room temperature magnetic moment values confirm the terpositive state of the lanthanide ions. Infrared spectra suggest the N-coordination of thiocyanate group. Electronic spectral studies of Tb(III), Dy(III) and Ho(III) complexes have been made in terms of LSJ term energies. 13 refs.

  18. 40 CFR 82.70 - Nonessential Class II products and exceptions.

    Science.gov (United States)

    2010-07-01

    ... provide for motor vehicle safety in accordance with Federal Motor Vehicle Safety Standards until January 1... 21 CFR 2.125(e); (ii) Lubricants, coatings or cleaning fluids for electrical or electronic equipment...; (iii) Lubricants, coatings or cleaning fluids used for aircraft maintenance, which contain class II...

  19. Management of skeletal class III malocclusion with a palatally impacted cuspid

    Directory of Open Access Journals (Sweden)

    Chris HN Chang

    2012-01-01

    Maintain the A-P position of the maxilla.Extrude lower molars to open the VDO by clockwise rotation to effectively retract the mandible relative to the maxilla.Retract the mandibular incisors.Correct the anterior X-bite and align the midlinesEstablish a normal overjet and overbite in a mutually protected, Class I occlusion.Retract lower lip to improve facial balance 0.022-in Damon D3® (standard torque and Inspire Ice® brackets ( Ormco were used. The simplicity of mechanics is illustrated

  20. Complexation of trivalent actinides and lanthanides with hydrophilic N-donor ligands for Am(III)/Cm(III) and An(III)/Ln(III) separation; Komplexierung von trivalenten Actiniden und Lanthaniden mit hydrophilen N-Donorliganden zur Am(III)/Cm(III)- bzw. An(III)/Ln(III)-Trennung

    Energy Technology Data Exchange (ETDEWEB)

    Wagner, Christoph

    2017-07-24

    The implementation of actinide recycling processes is considered in several countries, aiming at the reduction of long-term radiotoxicity and heat load of used nuclear fuel. This requires the separation of the actinides from the fission and corrosion products. The separation of the trivalent actinides (An(III)) Am(III) and Cm(III), however, is complicated by the presence of the chemically similar fission lanthanides (Ln(III)). Hydrophilic N-donor ligands are employed as An(III) or Am(III) selective complexing agents in solvent extraction to strip An(III) or Am(III) from an organic phase loaded with An(III) and Ln(III). Though they exhibit excellent selectivity, the complexation chemistry of these ligands and the complexes formed during solvent extraction are not sufficiently characterized. In the present thesis the complexation of An(III) and Ln(III) with hydrophilic N-donor ligands is studied by time resolved laser fluorescence spectroscopy (TRLFS), UV/Vis, vibronic sideband spectroscopy and solvent extraction. TRLFS studies on the complexation of Cm(III) and Eu(III) with the Am(III) selective complexing agent SO{sub 3}-Ph-BTBP (tetrasodium 3,3{sup '},3'',3{sup '''}-([2,2{sup '}-bipyridine]-6,6{sup '}-diylbis(1,2,4-triazine-3,5,6-triyl)) tetrabenzenesulfonate) revealed the formation of [M(SO{sub 3}-Ph-BTBP){sub n}]{sup (4n-3)-} complexes (M = Cm(III), Eu(III); n = 1, 2). The conditional stability constants were determined in different media yielding two orders of magnitude larger β{sub 2}-values for the Cm(III) complexes, independently from the applied medium. A strong impact of ionic strength on the stability and stoichiometry of the formed complexes was identified, resulting from the stabilization of the pentaanionic [M(SO{sub 3}-Ph-BTBP){sub 2}]{sup 5-} complex with increasing ionic strength. Thermodynamic studies of Cm(III)-SO{sub 3}-Ph-BTBP complexation showed that the proton concentration of the applied medium impacts

  1. Improved sensitivity for W-band Gd(III)-Gd(III) and nitroxide-nitroxide DEER measurements with shaped pulses

    Science.gov (United States)

    Bahrenberg, Thorsten; Rosenski, Yael; Carmieli, Raanan; Zibzener, Koby; Qi, Mian; Frydman, Veronica; Godt, Adelheid; Goldfarb, Daniella; Feintuch, Akiva

    2017-10-01

    Chirp and shaped pulses have been recently shown to be highly advantageous for improving sensitivity in DEER (double electron-electron resonance, also called PELDOR) measurements due to their large excitation bandwidth. The implementation of such pulses for pulse EPR has become feasible due to the availability of arbitrary waveform generators (AWG) with high sampling rates to support pulse shaping for pulses with tens of nanoseconds duration. Here we present a setup for obtaining chirp pulses on our home-built W-band (95 GHz) spectrometer and demonstrate its performance on Gd(III)-Gd(III) and nitroxide-nitroxide DEER measurements. We carried out an extensive optimization procedure on two model systems, Gd(III)-PyMTA-spacer-Gd(III)-PyMTA (Gd-PyMTA ruler; zero-field splitting parameter (ZFS) D ∼ 1150 MHz) as well as nitroxide-spacer-nitroxide (nitroxide ruler) to evaluate the applicability of shaped pulses to Gd(III) complexes and nitroxides, which are two important classes of spin labels used in modern DEER/EPR experiments. We applied our findings to ubiquitin, doubly labeled with Gd-DOTA-monoamide (D ∼ 550 MHz) as a model for a system with a small ZFS. Our experiments were focused on the questions (i) what are the best conditions for positioning of the detection frequency, (ii) which pump pulse parameters (bandwidth, positioning in the spectrum, length) yield the best signal-to-noise ratio (SNR) improvements when compared to classical DEER, and (iii) how do the sample's spectral parameters influence the experiment. For the nitroxide ruler, we report an improvement of up to 1.9 in total SNR, while for the Gd-PyMTA ruler the improvement was 3.1-3.4 and for Gd-DOTA-monoamide labeled ubiquitin it was a factor of 1.8. Whereas for the Gd-PyMTA ruler the two setups pump on maximum and observe on maximum gave about the same improvement, for Gd-DOTA-monoamide a significant difference was found. In general the choice of the best set of parameters depends on the D

  2. PENGGUNAAN FACE-MASK & EKSPANSI PALATAL PADA PERAWATAN MALOKLUSI KLAS III (Studi Pustaka

    Directory of Open Access Journals (Sweden)

    Krisnawati Krisnawati

    2015-08-01

    Full Text Available Class III skeletal anomaly is one of the most difficult malocclusions to correct in orthodontics. Orthodontist usually involved chincup appliances to restrain mandibular growth, camouflage techniques to advances maxillary incisors and retract mandibular incisors or waiting untul growth ceased to pursue orthognathic surgery. Many studies found that most of Class III malocclusions were characterized by maxillary retrognathism. In the late 1960s, the Delaire mask was popularized to protract the maxilla. The development of maxillary protraction with facemask and palatal expansion have provided a predictable and effective approach to managing treatment that was once considered difficult. Although no significant difference was found between early or late treatment group, the effect of improvement in facial aesthetics on psychosocial development resulted in a significant advantage for early treatment. However, the effects of face mask therapy should be evaluated over the long term in order to determine the relaps tendency.

  3. Streptococcus sanguinis Class Ib Ribonucleotide Reductase

    Science.gov (United States)

    Makhlynets, Olga; Boal, Amie K.; Rhodes, DeLacy V.; Kitten, Todd; Rosenzweig, Amy C.; Stubbe, JoAnne

    2014-01-01

    Streptococcus sanguinis is a causative agent of infective endocarditis. Deletion of SsaB, a manganese transporter, drastically reduces S. sanguinis virulence. Many pathogenic organisms require class Ib ribonucleotide reductase (RNR) to catalyze the conversion of nucleotides to deoxynucleotides under aerobic conditions, and recent studies demonstrate that this enzyme uses a dimanganese-tyrosyl radical (MnIII2-Y•) cofactor in vivo. The proteins required for S. sanguinis ribonucleotide reduction (NrdE and NrdF, α and β subunits of RNR; NrdH and TrxR, a glutaredoxin-like thioredoxin and a thioredoxin reductase; and NrdI, a flavodoxin essential for assembly of the RNR metallo-cofactor) have been identified and characterized. Apo-NrdF with FeII and O2 can self-assemble a diferric-tyrosyl radical (FeIII2-Y•) cofactor (1.2 Y•/β2) and with the help of NrdI can assemble a MnIII2-Y• cofactor (0.9 Y•/β2). The activity of RNR with its endogenous reductants, NrdH and TrxR, is 5,000 and 1,500 units/mg for the Mn- and Fe-NrdFs (Fe-loaded NrdF), respectively. X-ray structures of S. sanguinis NrdIox and MnII2-NrdF are reported and provide a possible rationale for the weak affinity (2.9 μm) between them. These streptococcal proteins form a structurally distinct subclass relative to other Ib proteins with unique features likely important in cluster assembly, including a long and negatively charged loop near the NrdI flavin and a bulky residue (Thr) at a constriction in the oxidant channel to the NrdI interface. These studies set the stage for identifying the active form of S. sanguinis class Ib RNR in an animal model for infective endocarditis and establishing whether the manganese requirement for pathogenesis is associated with RNR. PMID:24381172

  4. Complexes of 4-chlorophenoxyacetates of Nd(III), Gd(III) and Ho(III)

    International Nuclear Information System (INIS)

    Ferenc, W.; Bernat, M; Gluchowska, H.W.; Sarzynski, J.

    2010-01-01

    The complexes of 4-chlorophenoxyacetates of Nd(III), Gd(III) and Ho(III) have been synthesized as polycrystalline hydrated solids, and characterized by elemental analysis, spectroscopy, magnetic studies and also by X-ray diffraction and thermogravimetric measurements. The analysed complexes have the following colours: violet for Nd(III), white for Gd(III) and cream for Ho(III) compounds. The carboxylate groups bind as bidentate chelating (Ho) or bridging ligands (Nd, Gd). On heating to 1173K in air the complexes decompose in several steps. At first, they dehydrate in one step to form anhydrous salts, that next decompose to the oxides of respective metals. The gaseous products of their thermal decomposition in nitrogen were also determined and the magnetic susceptibilities were measured over the temperature range of 76-303K and the magnetic moments were calculated. The results show that 4-chlorophenoxyacetates of Nd(III), Gd(III) and Ho(III) are high-spin complexes with weak ligand fields. The solubility value in water at 293K for analysed 4-chlorophenoxyacetates is in the order of 10 -4 mol/dm 3 . (author)

  5. Polyadenylation of RNA transcribed from mammalian SINEs by RNA polymerase III: Complex requirements for nucleotide sequences.

    Science.gov (United States)

    Borodulina, Olga R; Golubchikova, Julia S; Ustyantsev, Ilia G; Kramerov, Dmitri A

    2016-02-01

    It is generally accepted that only transcripts synthesized by RNA polymerase II (e.g., mRNA) were subject to AAUAAA-dependent polyadenylation. However, we previously showed that RNA transcribed by RNA polymerase III (pol III) from mouse B2 SINE could be polyadenylated in an AAUAAA-dependent manner. Many species of mammalian SINEs end with the pol III transcriptional terminator (TTTTT) and contain hexamers AATAAA in their A-rich tail. Such SINEs were united into Class T(+), whereas SINEs lacking the terminator and AATAAA sequences were classified as T(-). Here we studied the structural features of SINE pol III transcripts that are necessary for their polyadenylation. Eight and six SINE families from classes T(+) and T(-), respectively, were analyzed. The replacement of AATAAA with AACAAA in T(+) SINEs abolished the RNA polyadenylation. Interestingly, insertion of the polyadenylation signal (AATAAA) and pol III transcription terminator in T(-) SINEs did not result in polyadenylation. The detailed analysis of three T(+) SINEs (B2, DIP, and VES) revealed areas important for the polyadenylation of their pol III transcripts: the polyadenylation signal and terminator in A-rich tail, β region positioned immediately downstream of the box B of pol III promoter, and τ region located upstream of the tail. In DIP and VES (but not in B2), the τ region is a polypyrimidine motif which is also characteristic of many other T(+) SINEs. Most likely, SINEs of different mammals acquired these structural features independently as a result of parallel evolution. Copyright © 2015 Elsevier B.V. All rights reserved.

  6. A Stable, Non-Cesiated III-Nitride Photocathode for Ultraviolet Astronomy Application

    Science.gov (United States)

    Bell, Lloyd

    In this effort, we propose to develop a new type of cesium-free photocathode using III-nitride (III-N) materials (GaN, AlN, and their alloys) and to achieve highly efficient, solar blind, and stable UV response. Currently, detectors used in UV instruments utilize a photocathode to convert UV photons into electrons that are subsequently detected by microchannel plate or CCD. The performance of these detectors critically depends on the efficiency and stability of their photocathodes. In particular, photocathode instability is responsible for many of the fabrication difficulties commonly experienced with this class of detectors. In recent years, III-N (in particular GaN) photocathodes have been demonstrated with very high QE (>50%) in parts of UV spectral range. Moreover, due to the wide bandgaps of III-nitride materials, photocathode response can be tailored to be intrinsically solar-blind. However, these photocathodes still rely on cesiation for activation, necessitating all-vacuum fabrication and sealed-tube operation. The proposed photocathode structure will achieve activation through methods for band structure engineering such as delta-doping and polarization field engineering. Compared to the current state-of-the-art in flight-ready microchannel plate sealed tubes, photocathodes based on III-N materials will yield high QE and significantly enhance both fabrication yield and reliability, since they do not require cesium or other highly reactive materials for activation. This performance will enable a ~4 meter medium class UV spectroscopic and imaging mission that is of high scientific priority for NASA. This work will build on the success of our previous APRA-funded effort. In that work, we demonstrated III-nitride photocathode operation without the use of cesium and stable response with respect to time. These accomplishments represent major improvements to the state-of-the-art for photocathode technologies. In the proposed effort, we will implement III

  7. Dynamic fracture toughness of ASME SA508 Class 2a ASME SA533 grade A Class 2 base and heat affected zone material and applicable weld metals

    International Nuclear Information System (INIS)

    Logsdon, W.A.; Begley, J.A.; Gottshall, C.L.

    1978-03-01

    The ASME Boiler and Pressure Vessel Code, Section III, Article G-2000, requires that dynamic fracture toughness data be developed for materials with specified minimum yield strengths greater than 50 ksi to provide verification and utilization of the ASME specified minimum reference toughness K/sub IR/ curve. In order to qualify ASME SA508 Class 2a and ASME SA533 Grade A Class 2 pressure vessel steels (minimum yield strengths equal 65 kip/in. 2 and 70 kip/in. 2 , respectively) per this requirement, dynamic fracture toughness tests were performed on these materials. All dynamic fracture toughness values of SA508 Class 2a base and HAZ material, SA533 Grade A Class 2 base and HAZ material, and applicable weld metals exceeded the ASME specified minimum reference toughness K/sub IR/ curve

  8. Formation constants of Sm(III), Dy(III), Gd(III), Pr(III) and Nd(III) complexes of tridentate schiff base, 2-[(1H-benzimidazol-2-yl-methylene) amino] phenol

    International Nuclear Information System (INIS)

    Omprakash, K.L.; Chandra Pal, A.V.; Reddy, M.L.N.

    1982-01-01

    A new tridentate schiff base, 2- (1H-benzimidazol-2-yl-methylene)amino phenol derived from benzimididazole-2-carbo-xaldehyde and 2-aminophenol has been synthesised and characterised by spectral and analytical data. Proton-ligand formation constants of the schiff base and metal-ligand formation constants of its complexes with Sm(III), Dy(III), Gd(III), Nd(III) and Pr(III) have been determined potentiometrically in 50% (v/v) aqueous dioxane at an ionic strength of 0.1M (NaClO 4 ) and at 25deg C using the Irving-Rossotti titration technique. The order of stability constants (logβ 2 ) is found to be Sm(III)>Dy(III)>Gd(III)>Pr(III)>Nd(III). (author)

  9. Formation constants of Sm(III), Dy(III), Gd(III), Pr(III) and Nd(III) complexes of tridentate schiff base, 2-((1H-benzimidazol-2-yl-methylene) amino) phenol

    Energy Technology Data Exchange (ETDEWEB)

    Omprakash, K L; Chandra Pal, A V; Reddy, M L.N. [Osmania Univ., Hyderabad (India). Dept. of Chemistry

    1982-03-01

    A new tridentate schiff base, 2- (1H-benzimidazol-2-yl-methylene)amino phenol derived from benzimididazole-2-carbo-xaldehyde and 2-aminophenol has been synthesised and characterised by spectral and analytical data. Proton-ligand formation constants of the schiff base and metal-ligand formation constants of its complexes with Sm(III), Dy(III), Gd(III), Nd(III) and Pr(III) have been determined potentiometrically in 50% (v/v) aqueous dioxane at an ionic strength of 0.1M (NaClO/sub 4/) and at 25deg C using the Irving-Rossotti titration technique. The order of stability constants (log..beta../sub 2/) is found to be Sm(III)>Dy(III)>Gd(III)>Pr(III)>Nd(III).

  10. Spectrophotometric and pH-Metric Studies of Ce(III, Dy(III, Gd(III,Yb(III and Pr(III Metal Complexes with Rifampicin

    Directory of Open Access Journals (Sweden)

    A. N. Sonar

    2011-01-01

    Full Text Available The metal-ligand and proton-ligand stability constant of Ce(III, Dy(III, Gd(III,Yb(III and Pr(III metals with substituted heterocyclic drug (Rifampicin were determined at various ionic strength by pH metric titration. NaClO4 was used to maintain ionic strength of solution. The results obtained were extrapolated to the zero ionic strength using an equation with one individual parameter. The thermodynamic stability constant of the complexes were also calculated. The formation of complexes has been studied by Job’s method. The results obtained were of stability constants by pH metric method is confirmed by Job’s method.

  11. Efficiency of a new strategy involving a new class of natural hetero-ligand iron(III) chelates (Fe(III)-NHL) to improve fruit tree growth in alkaline/calcareous soils.

    Science.gov (United States)

    Fuentes, Marta; Ortuño, María F; Pérez-Sarmiento, Francisco; Bacaicoa, Eva; Baigorri, Roberto; Conejero, Wenceslao; Torrecillas, Arturo; García-Mina, José M

    2012-12-01

    Iron (Fe) chlorosis is a serious problem affecting the yield and quality of numerous crops and fruit trees cultivated in alkaline/calcareous soils. This paper describes the efficiency of a new class of natural hetero-ligand Fe(III) chelates (Fe-NHL) to provide available Fe for chlorotic lemon trees grown in alkaline/calcareous soils. These chelates involve the participation in the reaction system of a partially humified lignin-based natural polymer and citric acid. First results showed that Fe-NHL was adsorbed on the soil matrix while maintaining available Fe for plants in alkaline/calcareous solution. The effects of using three different sources as Fe fertilisers were also compared: two Fe-NHL formulations (NHL1, containing 100% of Fe as Fe-NHL, and NHL2, containing 80% of Fe as Fe-NHL and 20% of Fe as Fe-ethylenediamine-N,N'-bis-(o-hydroxyphenylacetic) acid (Fe-EDDHA)) and Fe-EDDHA. Both Fe-NHL formulations increased fruit yield without negative effects on fruit quality in comparison with Fe-EDDHA. In the absence of the Fe-starter fraction (NHL1), trees seemed to optimise Fe assimilation and translocation from Fe-NHL, directing it to those parts of the plant more involved in development. The field assays confirmed that Fe-NHL-based fertilisers are able to provide Fe to chlorotic trees, with results comparable to Fe-EDDHA. Besides, this would imply a more sustainable and less expensive remediation than synthetic chelates. Copyright © 2012 Society of Chemical Industry.

  12. Complexes of lanthanum(III), cerium(III), samarium(III) and dysprosium(III) with substituted piperidines

    Energy Technology Data Exchange (ETDEWEB)

    Manhas, B S; Trikha, A K; Singh, H; Chander, M

    1983-11-01

    Complexes of the general formulae M/sub 2/Cl/sub 6/(L)/sub 3/.C/sub 2/H/sub 5/OH and M/sub 2/(NO/sub 3/)/sub 6/(L)/sub 2/.CH/sub 3/OH have been synthesised by the reactions of chlorides and nitrates of La(III), Ce(III), Sm(III) and Dy(III) with 2-methylpiperidine, 3-methylpiperidine and 4-methylpiperidine. These complexes have been characterised on the basis of their elemental analysis, and IR and electronic reflectance spectra. IR spectral data indicate the presence of coordinated ethanol and methanol molecules and bidentate nitrate groups. Coordination numbers of the metal ions vary from 5 to 8. 19 refs.

  13. Interaction between gold (III) chloride and potassium hexacyanoferrate (II/III)-Does it lead to gold analogue of Prussian blue?

    Energy Technology Data Exchange (ETDEWEB)

    Harish, S. [Electrodics and Electrocatalysis Division, CSIR-Central Electrochemical Research Institute, Karaikudi 630006, Tamilnadu (India); Joseph, James, E-mail: jameskavlam@yahoo.com [Electrodics and Electrocatalysis Division, CSIR-Central Electrochemical Research Institute, Karaikudi 630006, Tamilnadu (India); Phani, K.L.N. [Electrodics and Electrocatalysis Division, CSIR-Central Electrochemical Research Institute, Karaikudi 630006, Tamilnadu (India)

    2011-06-30

    Highlights: > In group IB, Cu and Ag form Prussian blue analogues but similar formation of gold hexacyanoferrate was not found in the literature and non-existence of gold hexacyanoferrate remains a mystery. > Potential cycling of gold chloride and potassium ferro/ferri cyanide was resulted in the formation of Au-PB nano-composite. > Redox reaction between gold chloride and potassium ferrocyanide ion is spontaneous but no reaction occurs when gold chloride and potassium ferricyanide is mixed. > We are proposing the formation of a compound with general formula 'KFe{sub x}[Au(CN){sub 2}]{sub y}' and discussing the formation of gold hexacyanoferrate is not feasible by simple chemical or electrochemical reaction in contrast to other PB analogues. - Abstract: Prussian blue analogues are a class of compounds formed by the reaction between metal salt and potassium hexacyanoferrate (II/III). In our earlier report, the formation of Au-Prussian blue nano-composite was noticed on potential cycling the glassy carbon electrode in a medium containing gold (III) chloride and potassium hexacyanoferrate (III). Hence in this work, the formation of gold hexacyanoferrate was attempted by a simple chemical reaction. The reaction of gold (III) chloride with potassium hexacyanoferrate (II/III) was examined by UV-Vis spectroscopy and found that there is no redox reaction between gold (III) chloride and potassium hexacyanoferrate (III). However, the redox reaction occurs between gold (III) chloride and potassium hexacyanoferrate (II) leading to the formation of charge transfer band and the conversion of hexacyanoferrate (II) to hexacyanoferrate (III) was evidenced by the emergence of new absorption peaks in UV-Vis spectra. The oxidation state of gold in Au-Fe complex was found to be +1 from X-ray photoelectron spectroscopy. The stability of the Au-Fe complex was also studied by cyclic voltammetry. Cyclic voltammetric results indicated the presence of high spin iron in Au

  14. Interaction between gold (III) chloride and potassium hexacyanoferrate (II/III)-Does it lead to gold analogue of Prussian blue?

    International Nuclear Information System (INIS)

    Harish, S.; Joseph, James; Phani, K.L.N.

    2011-01-01

    Highlights: → In group IB, Cu and Ag form Prussian blue analogues but similar formation of gold hexacyanoferrate was not found in the literature and non-existence of gold hexacyanoferrate remains a mystery. → Potential cycling of gold chloride and potassium ferro/ferri cyanide was resulted in the formation of Au-PB nano-composite. → Redox reaction between gold chloride and potassium ferrocyanide ion is spontaneous but no reaction occurs when gold chloride and potassium ferricyanide is mixed. → We are proposing the formation of a compound with general formula 'KFe x [Au(CN) 2 ] y ' and discussing the formation of gold hexacyanoferrate is not feasible by simple chemical or electrochemical reaction in contrast to other PB analogues. - Abstract: Prussian blue analogues are a class of compounds formed by the reaction between metal salt and potassium hexacyanoferrate (II/III). In our earlier report, the formation of Au-Prussian blue nano-composite was noticed on potential cycling the glassy carbon electrode in a medium containing gold (III) chloride and potassium hexacyanoferrate (III). Hence in this work, the formation of gold hexacyanoferrate was attempted by a simple chemical reaction. The reaction of gold (III) chloride with potassium hexacyanoferrate (II/III) was examined by UV-Vis spectroscopy and found that there is no redox reaction between gold (III) chloride and potassium hexacyanoferrate (III). However, the redox reaction occurs between gold (III) chloride and potassium hexacyanoferrate (II) leading to the formation of charge transfer band and the conversion of hexacyanoferrate (II) to hexacyanoferrate (III) was evidenced by the emergence of new absorption peaks in UV-Vis spectra. The oxidation state of gold in Au-Fe complex was found to be +1 from X-ray photoelectron spectroscopy. The stability of the Au-Fe complex was also studied by cyclic voltammetry. Cyclic voltammetric results indicated the presence of high spin iron in Au-Fe complex. Hence 'as

  15. Comparison of an Imaging Software and Manual Prediction of Soft Tissue Changes after Orthognathic Surgery

    Directory of Open Access Journals (Sweden)

    M. S. Ahmad Akhoundi

    2012-01-01

    Full Text Available Objective: Accurate prediction of the surgical outcome is important in treating dentofacial deformities. Visualized treatment objectives usually involve manual surgical simulation based on tracing of cephalometric radiographs. Recent technical advancements have led to the use of computer assisted imaging systems in treatment planning for orthognathic surgical cases. The purpose of this study was to examine and compare the ability and reliability of digitization using Dolphin Imaging Software with traditional manual techniques and to compare orthognathic prediction with actual outcomes.Materials and Methods: Forty patients consisting of 35 women and 5 men (32 class III and 8 class II with no previous surgery were evaluated by manual tracing and indirect digitization using Dolphin Imaging Software. Reliability of each method was assessed then the two techniques were compared using paired t test.Result: The nasal tip presented the least predicted error and higher reliability. The least accurate regions in vertical plane were subnasal and upper lip, and subnasal and pogonion in horizontal plane. There were no statistically significant differences between the predictions of groups with and without genioplasty.Conclusion: Computer-generated image prediction was suitable for patient education and communication. However, efforts are still needed to improve accuracy and reliability of the prediction program and to include changes in soft tissue tension and muscle strain.

  16. The Use of Invisalign® System in the Management of the Orthodontic Treatment before and after Class III Surgical Approach.

    Science.gov (United States)

    Pagani, Renato; Signorino, Fabrizio; Poli, Pier Paolo; Manzini, Pietro; Panisi, Irene

    2016-01-01

    The approach to skeletal dysmorphisms in the maxillofacial area usually requires an orthodontic treatment by means of fixed appliances, both before and after the surgical phase. Since its introduction, Invisalign system has become a popular treatment choice for the clinicians because of the aesthetics and comfort of the removable clear aligners compared with the traditional appliances. Therefore, the aim of the present report was to illustrate the management of a malocclusion by means of Invisalign system associated with the traditional surgical technique. The present paper shows a case of a 23-year-old male patient characterized by a Class III malocclusion with lateral deviation of the mandible to the left side and cross-bite on teeth 2.2, 2.3, and 2.4. Invisalign system was used during the pre- and postsurgical phases rather than fixed appliances. The posttreatment cephalometric analysis emphasized the stability of the dental and skeletal symmetry corrections, occlusion and functional balance, over a 6-year follow-up. The results achieved at the end of the treatment showed how Invisalign can be effective in the management of the orthodontic phases in orthognathic surgery. The follow-up after 6 years emphasizes the stability of the treatment over time.

  17. The Use of Invisalign® System in the Management of the Orthodontic Treatment before and after Class III Surgical Approach

    Directory of Open Access Journals (Sweden)

    Renato Pagani

    2016-01-01

    Full Text Available The approach to skeletal dysmorphisms in the maxillofacial area usually requires an orthodontic treatment by means of fixed appliances, both before and after the surgical phase. Since its introduction, Invisalign system has become a popular treatment choice for the clinicians because of the aesthetics and comfort of the removable clear aligners compared with the traditional appliances. Therefore, the aim of the present report was to illustrate the management of a malocclusion by means of Invisalign system associated with the traditional surgical technique. The present paper shows a case of a 23-year-old male patient characterized by a Class III malocclusion with lateral deviation of the mandible to the left side and cross-bite on teeth 2.2, 2.3, and 2.4. Invisalign system was used during the pre- and postsurgical phases rather than fixed appliances. The posttreatment cephalometric analysis emphasized the stability of the dental and skeletal symmetry corrections, occlusion and functional balance, over a 6-year follow-up. The results achieved at the end of the treatment showed how Invisalign can be effective in the management of the orthodontic phases in orthognathic surgery. The follow-up after 6 years emphasizes the stability of the treatment over time.

  18. Effect of transcutaneous electrical stimulation treatment on lower urinary tract symptoms after class III radical hysterectomy in cervical cancer patients: study protocol for a multicentre, randomized controlled trial.

    Science.gov (United States)

    Sun, Xiu-Li; Wang, Hai-Bo; Wang, Zhi-Qi; Cao, Ting-Ting; Yang, Xin; Han, Jing-Song; Wu, Yang-Feng; Reilly, Kathleen H; Wang, Jian-Liu

    2017-06-15

    Class III radical hysterectomy (RH III)_plus pelvic lymphadenectomy is the standard surgery for early stage cervical cancer (CC) patients, the 5 year survival rate is about 90%, but pelvic floor disorders especially bladder dysfunction are common due to damaged vessels and nerve fibers following surgery. Transcutaneous electrical stimulation (TENS) treatment has been used to treat bladder disorders for many years, but its effect on cervical cancer patients, the best treatment time point and stimulated protocol, had never been assessed. The aim of this study is to investigate the efficacy of TENS treatment on lower urinary tract symptoms (LUTS) after RH III in CC patients. The study will be conducted as a clinical, multicentre, randomised controlled trial with balanced randomisation (1:1). The planned sample size is 208 participants (at 1:1 ratio, 104 subjects in each group). At 5-7 days after RH III, patients are screened according to operative and pathological findings. Enrolled participants are randomised into an intervention group (TENS plus conventional clinical care) or control group (conventional clinical care), with stratification by menopausal status (menopause vs. non-menopause) and surgical modality (laparoscopic RH or abdominal RH). Participants in both groups will be followed up at 14 days, 21 days, 28 days, 3 months, 6 months, 12 months, 18 months and 24 months after surgery. The primary endpoint is improvement rate of urination function which is defined as recovery (residual urine ≤50 ml) or improvement (residual urine 50-100 ml). Secondary endpoints include urodynamic parameter, urinary incontinence, anorectal function, pelvic function, quality of life (QOL), disease-free survival and adverse events. Primary endpoint analyses will be carried out by Cochran-Mantel-Haenszel tests taking into center effect. To our knowledge this is the first trial to investigate the effect of TENS treatment on bladder function recovery after RH III among

  19. 75 FR 73861 - Change in Rates and Classes of General Applicability for Competitive Products

    Science.gov (United States)

    2010-11-29

    ... percent for parcels picked up at a return Network Distribution Center (RNDC) and 8.0 percent for parcels... Part III Postal Service Change in Rates and Classes of General Applicability for Competitive...; [[Page 73862

  20. Inner-sphere and outer-sphere complexes of yttrium(III), lanthanum (III), neodymium(III), terbium(III) and thulium(III) with halide ions in N,N-dimethylformamide

    International Nuclear Information System (INIS)

    Takahashi, Ryouta; Ishiguro, Shin-ichi

    1991-01-01

    The formation of chloro, bromo and iodo complexes of yttrium(III), and bromo and iodo complexes of lanthanum(III), neodymium(III), terbium(III) and thulium(III) has been studied by precise titration calorimetry in N,N-dimethylformamide (DMF) at 25 o C. The formation of [YCl] 2+ , [YCl 2 ] + , [YCl 3 ] and [YCl 4 ] - , and [MBr] 2+ and [MBr 2 ] + (M = Y, La, Nd, Tb, Tm) was revealed, and their formation constants, enthalpies and entropies were determined. It is found that the formation enthalpies change in the sequence ΔH o (Cl) > ΔH o (l), which is unusual for hard metal (III) ions. This implies that, unlike the chloride ion, the bromide ion forms outer-sphere complexes with the lanthanide(III) and yttrium(III) ions in DMF. Evidence for either an inner- or outer-sphere complex was obtained from 89 Y NMR spectra for Y(ClO 4 ) 3 , YCl 3 and YBr 3 DMF solutions at room temperature. (author)

  1. A novel TaqI polymorphism in the coding region of the ovine TNXB gene in the MHC class III region: morphostructural and physiological influences.

    Science.gov (United States)

    Ajayi, Oyeyemi O; Adefenwa, Mufliat A; Agaviezor, Brilliant O; Ikeobi, Christian O N; Wheto, Matthew; Okpeku, Moses; Amusan, Samuel A; Yakubu, Abdulmojeed; De Donato, Marcos; Peters, Sunday O; Imumorin, Ikhide G

    2014-02-01

    The tenascin-XB (TNXB) gene has antiadhesive effects, functions in matrix maturation in connective tissues, and localizes to the major histocompatibility complex class III region. We hypothesized that it may influence adaptive physiological response through an effect on blood vessel function. We identified a novel g.1324 A→G polymorphism at a TaqI recognition site in a 454 bp fragment of ovine TNXB and genotyped it in 150 Nigerian sheep using PCR-RFLP. The missense mutation changes glutamic acid (GAA) to glycine (GGA). Among SNP genotypes, significant differences (P bone length. Interaction effects of breed, SNP genotype, and geographic location had a significant effect (P < 0.05) on chest girth. The SNP genotype was significantly (P < 0.05) associated with physiological traits of pulse rate and skin temperature. The observed effect of this novel polymorphism may be mediated through its role in connective tissue biology, requiring further association and functional studies.

  2. No association between types of unilateral mandibular condylar abnormalities and facial asymmetry in orthopedic-treated patients with juvenile idiopathic arthritis

    DEFF Research Database (Denmark)

    Stoustrup, Peter Bangsgaard; Ahlefeldt-Laurvig-Lehn, Nicole; Kristensen, Kasper Dahl

    2018-01-01

    with JIA. The contralateral TMJ was thereafter scored as either "normal," "deformed," or "erosive," consistent with predefined criteria. Based on the bilateral radiologic TMJ appearances, 3 JIA groups were assigned: normal/normal, normal/deformed, and normal/erosive. The severity of the dentofacial...... of the cone-beam computed tomography. Significantly greater dentofacial asymmetries were observed in the 2 groups of JIA patients with unilateral condylar abnormalities (deformation or erosion) than in the other groups. A similar degree of dentofacial asymmetry was observed in JIA patients with bilateral...... normal TMJs and in the nonarthritic control group. CONCLUSIONS: JIA patients with unilateral condylar abnormalities (deformation or erosion) exhibited significantly more severe dentofacial asymmetries than did the JIA patients without condylar abnormalities and the control subjects. We found the same...

  3. CERN Technical Training 2004: New Short Course III (SC III) on Microsoft Outlook - Meetings and Delegation

    CERN Multimedia

    Monique Duval

    2004-01-01

    The CERN Technical Training programme is now proposing a new format for courses on Microsoft Outlook. Three two-hours Short Courses (SC) cover basic and advanced functionalities of the recommended mail client for email at CERN. Each module can be followed independently. The next scheduled session of the 3rd module will take place as follows: Outlook (SC III): Meetings and Delegation. Next session: 9.11.2004 (14:00-16:00) SC III will cover how to organise and manage meetings, work with meeting requests, share tasks, and use email and calendar delegation. The number of participants to each session is limited to 8. The instructor is English-French bilingual, and she will be available some time after each session to answer specific questions, or provide further explanations following demand. The cost of attending any SC module on Outlook is 70.- CHF. The above session will be confirmed if there are enough participants, and the attendance costs will be lower in case of a full class. If you are interested in...

  4. Organic / IV, III-V Semiconductor Hybrid Solar Cells

    Directory of Open Access Journals (Sweden)

    Pang-Leen Ong

    2010-03-01

    Full Text Available We present a review of the emerging class of hybrid solar cells based on organic-semiconductor (Group IV, III-V, nanocomposites, which states separately from dye synthesized, polymer-metal oxides and organic-inorganic (Group II-VI nanocomposite photovoltaics. The structure of such hybrid cell comprises of an organic active material (p-type deposited by coating, printing or spraying technique on the surface of bulk or nanostructured semiconductor (n-type forming a heterojunction between the two materials. Organic components include various photosensitive monomers (e.g., phtalocyanines or porphyrines, conjugated polymers, and carbon nanotubes. Mechanisms of the charge separation at the interface and their transport are discussed. Also, perspectives on the future development of such hybrid cells and comparative analysis with other classes of photovoltaics of third generation are presented.

  5. Reductions in knee joint forces with weight loss are attenuated by gait adaptations in class III obesity.

    Science.gov (United States)

    DeVita, Paul; Rider, Patrick; Hortobágyi, Tibor

    2016-03-01

    A consensus exists that high knee joint forces are a precursor to knee osteoarthritis and weight loss reduces these forces. Because large weight loss also leads to increased step length and walking velocity, knee contact forces may be reduced less than predicted by the magnitude of weight loss. The purpose was to determine the effects of weight loss on knee muscle and joint loads during walking in Class III obese adults. We determined through motion capture, force platform measures and biomechanical modeling the effects of weight loss produced by gastric bypass surgery over one year on knee muscle and joint loads during walking at a standard, controlled velocity and at self-selected walking velocities. Weight loss equaling 412 N or 34% of initial body weight reduced maximum knee compressive force by 824 N or 67% of initial body weight when walking at the controlled velocity. These changes represent a 2:1 reduction in knee force relative to weight loss when walking velocity is constrained to the baseline value. However, behavioral adaptations including increased stride length and walking velocity in the self-selected velocity condition attenuated this effect by ∼50% leading to a 392 N or 32% initial body weight reduction in compressive force in the knee joint. Thus, unconstrained walking elicited approximately 1:1 ratio of reduction in knee force relative to weight loss and is more indicative of walking behavior than the standard velocity condition. In conclusion, massive weight loss produces dramatic reductions in knee forces during walking but when patients stride out and walk faster, these favorable reductions become substantially attenuated. Copyright © 2016 Elsevier B.V. All rights reserved.

  6. "Silent" Sleep Apnea in Dentofacial Deformities and Prevalence of Daytime Sleepiness After Orthognathic and Intranasal Surgery.

    Science.gov (United States)

    Posnick, Jeffrey C; Adachie, Anayo; Singh, Neeru; Choi, Elbert

    2018-04-01

    The purposes of this study were to determine the occurrence of undiagnosed "silent" obstructive sleep apnea (OSA) in dentofacial deformity (DFD) patients at initial surgical presentation and to report on the level of daytime sleepiness in DFD patients with OSA and chronic obstructive nasal breathing (CONB) after undergoing bimaxillary, chin, and intranasal surgery. A retrospective cohort study of patients with a bimaxillary DFD and CONB was implemented. Patients were divided into those with no OSA (group I) and those with OSA (group II). Group II was further subdivided into patients referred with polysomnogram (PSG)-confirmed OSA (group IIa) and those with a diagnosis of OSA only after surgical consultation, airway evaluation, and a positive PSG (group IIb). Group II patients were analyzed at a minimum of 1 year after surgery (range, 1 to 10 years) for daytime sleepiness with the Epworth Sleepiness Scale. Patients with postoperative excessive daytime sleepiness were assessed for risk factors and continued need for OSA treatment. Patients in group II were studied to determine which DFD patterns were most associated with OSA. We compared the prevalence of OSA between our study population and the general population. Two hundred sixty-two patients met the inclusion criteria. Of these, 23% (60 of 262) had PSG-confirmed OSA (group II). This rate was much higher than that found in the general population. Of the patients, 7% (19 of 262) were known to have OSA at initial surgical consultation (group IIa). An additional 16% (41 of 262) were later confirmed by PSG to have OSA (group IIb). Patients with primary mandibular deficiency and short face DFDs were most likely to have OSA (P surgery. A significant association was found between group II patients with postoperative excessive daytime sleepiness ("sleepy" or "very sleepy") and a preoperative body mass index category of overweight (P = .026). Our study found silent OSA to be frequent in the DFD population. The

  7. Genomic Characterization of Methanomicrobiales Reveals Three Classes of Methanogens

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Iain; Ulrich, Luke E.; Lupa, Boguslaw; Susanti, Dwi; Porat, Iris; Hooper, Sean D.; Lykidis, Athanasios; Sieprawska-Lupa, Magdalena; Dharmarajan, Lakshmi; Goltsman, Eugene; Lapidus, Alla; Saunders, Elizabeth; Han, Cliff; Land, Miriam; Lucas, Susan; Mukhopadhyay, Biswarup; Whitman, William B.; Woese, Carl; Bristow, James; Kyrpides, Nikos

    2009-05-01

    Methanomicrobiales is the least studied order of methanogens. While these organisms appear to be more closely related to the Methanosarcinales in ribosomal-based phylogenetic analyses, they are metabolically more similar to Class I methanogens. In order to improve our understanding of this lineage, we have completely sequenced the genomes of two members of this order, Methanocorpusculum labreanum Z and Methanoculleus marisnigri JR1, and compared them with the genome of a third, Methanospirillum hungatei JF-1. Similar to Class I methanogens, Methanomicrobiales use a partial reductive citric acid cycle for 2-oxoglutarate biosynthesis, and they have the Eha energy-converting hydrogenase. In common with Methanosarcinales, Methanomicrobiales possess the Ech hydrogenase and at least some of them may couple formylmethanofuran formation and heterodisulfide reduction to transmembrane ion gradients. Uniquely, M. labreanum and M. hungatei contain hydrogenases similar to the Pyrococcus furiosus Mbh hydrogenase, and all three Methanomicrobiales have anti-sigma factor and anti-anti-sigma factor regulatory proteins not found in other methanogens. Phylogenetic analysis based on seven core proteins of methanogenesis and cofactor biosynthesis places the Methanomicrobiales equidistant from Class I methanogens and Methanosarcinales. Our results indicate that Methanomicrobiales, rather than being similar to Class I methanogens or Methanomicrobiales, share some features of both and have some unique properties. We find that there are three distinct classes of methanogens: the Class I methanogens, the Methanomicrobiales (Class II), and the Methanosarcinales (Class III).

  8. Solvent extraction of anionic chelate complexes of lanthanum(III), europium(III), lutetium(III), scandium(III), and indium(III) with 2-thenoyltrifluoroacetone as ion-pairs with tetrabutylammonium ions

    International Nuclear Information System (INIS)

    Noro, Junji; Sekine, Tatsuya.

    1992-01-01

    The solvent extraction of lanthanum(III), europium(III), lutetium(III), scandium(III), and indium(III) in 0.1 mol dm -3 sodium nitrate solutions with 2-thenoyltrifluoroacetone (Htta) in the absence and presence of tetrabutylammonium ions (tba + ) into carbon tetrachloride was measured. The extraction of lanthanum(III), europium(III), and lutetium(III) was greatly enhanced by the addition of tba + ; this could be explained in terms of the extraction of a ternary complex, M(tta) 4 - tba + . However, the extractions of scandium(III) and indium(III) were nearly the same when tba + was added. The data were treated on the basis of the formation equilibrium of the ternary complex from the neutral chelate, M(tta) 3 , with the extracted ion-pairs of the reagents, tta - tba + , in the organic phase. It was concluded that the degree of association of M(tta) 3 with the ion-pair, tta - tba + , is greater in the order La(tta) 3 ≅ Eu(tta) 3 > Lu(tta) 3 , or that the stability of the ternary complex in the organic phase is higher in the order La(tta) 4 - tba + ≅ Eu(tta) 4 - tba + > Lu(tta) 4 - tba + . This is similar to those of adduct metal chelates of Htta with tributylphosphate (TBP) in synergistic extraction systems. (author)

  9. Nasal changes after orthognathic surgery for patients with prognathism and Class III malocclusion: analysis using three-dimensional photogrammetry.

    Science.gov (United States)

    Worasakwutiphong, Saran; Chuang, Ya-Fang; Chang, Hsin-Wen; Lin, Hsiu-Hsia; Lin, Pei-Ju; Lo, Lun-Jou

    2015-02-01

    Orthognathic surgery alters the position of maxilla and mandible, and consequently changes the nasal shape. The nasal change remains a concern to Asian patients. The aim of this study was to measure the nasal changes using a novel three-dimensional photographic imaging method. A total of 38 patients with Class III malocclusion and prognathism were enrolled. All patients underwent two-jaw surgery with the standard technique. A nasal alar cinching suture was included at the end of procedure. Facial landmarks and nasal morphology were defined and measured from pre- and postoperative three-dimensional photographic images. Intra-rater errors on landmark identification were controlled. Patient's reports of perceptual nasal changes were recorded. The average width of the alar base and subalare remained similar after surgery. Alar width was increased by 0.74 mm. Nasal height and length remained the same. Nasolabial angle increased significantly. The area of nostril show revealed a significant increase and was correlated with a decrease of columella inclination. Nasal tip projection decreased significantly, by 1.99 mm. Preoperative nasal morphology was different between patients with and without cleft lip/palate, but most nasal changes were concordant. In the self-perception, 37% of patients reported improved nasal appearance, 58% reported no change, and 5% were not satisfied with the nasal changes. After the surgery, characteristic nasal changes occurred with an increase of nasolabial angle and nostril show, but a preserved nasal width. The majority of patients did not perceive adverse nasal changes. Copyright © 2014. Published by Elsevier B.V.

  10. Relationship between time to clinical response and outcomes among Pneumonia Outcomes Research Team (PORT) risk class III and IV hospitalized patients with community-acquired pneumonia who received ceftriaxone and azithromycin.

    Science.gov (United States)

    Zasowski, Evan; Butterfield, Jill M; McNutt, Louise-Ann; Cohen, Jason; Cosler, Leon; Pai, Manjunath P; Gottwald, Joseph; Chen, Wen Zhen; Lodise, Thomas P

    2014-07-01

    Recent Food and Drug Administration (FDA) guidance endorses the use of an early clinical response endpoint as the primary outcome for community-acquired bacterial pneumonia (CABP) trials. While antibiotics will now be approved for CABP, in practice they will primarily be used to treat patients with community-acquired pneumonia (CAP). More importantly, it is unclear how achievement of the new FDA CABP early response endpoint translates into clinically applicable real-world outcomes for patients with CAP. To address this, a retrospective cohort study was conducted among adult patients who received ceftriaxone and azithromycin for CAP of Pneumonia Outcomes Research Team (PORT) risk class III and IV at an academic medical center. The clinical response was defined as clinical stability for 24 h with improvement in at least one pneumonia symptom and with no symptom worsening. A classification and regression tree (CART) was used to determine the delay in response time, measured in days, associated with the greatest risk of a prolonged hospital length of stay (LOS) and adverse outcomes (in-hospital mortality or 30-day CAP-related readmission). A total of 250 patients were included. On average, patients were discharged 2 days following the achievement of a clinical response. In the CART analysis, adverse clinical outcomes were higher among day 5 nonresponders than those who responded by day 5 (22.4% versus 6.9%, P = 0.001). The findings from this study indicate that time to clinical response, as defined by the recent FDA guidance, is a reasonable prognostic indicator of real-world effectiveness outcomes among hospitalized PORT risk class III and IV patients with CAP who received ceftriaxone and azithromycin. Copyright © 2014, American Society for Microbiology. All Rights Reserved.

  11. HLA class I expression and its alteration by preoperative hyperthermo-chemoradiotherapy in patients with rectal cancer.

    Directory of Open Access Journals (Sweden)

    Hiro Sato

    Full Text Available OBJECTIVE: Enhancing immunologic responses, including human leukocyte antigen (HLA class I expression on tumor cells and recognition and elimination of tumor cells by tumor-specific cytotoxic T lymphocyte (CTL, is considered a novel concept of radiotherapy. The present study examined patients who underwent preoperative hyperthermo-chemoradiotherapy (HCRT for locally advanced rectal cancer to assess the correlation between HLA class I expression and clinical outcome. MATERIALS AND METHODS: Seventy-eight patients with locally advanced rectal adenocarcinoma who received preoperative HCRT were enrolled. The median age of the patients was 64 years (range, 33-85 years and 4, 18, and 56 patients had clinical stage I, II and III disease, respectively. Formalin-fixed and paraffin-embedded tissues excised before and after HCRT were subjected to immunohistochemical analysis with an anti-HLA class I-A, B, C antibody. HLA class I expression was graded according to tumor cell positivity. RESULTS: In pre-HCRT, the number of specimens categorized as Grade 0 and 1 were 19 (24% and 58 (74%, respectively. Only 1 patient (1% showed Grade 2 expression. However, 6 (8%, 27 (35%, 7 (9%, and 12 (15% post-HCRT specimens were graded as Grade 0, 1, 2, and 3, respectively. There was a significant increase in HLA class I expression in post-HCRT specimens (p<0.01. However, neither pre- nor post-HCRT HLA class I expression affected overall survival and distant metastasis-free survival in clinical stage III patients. Univariate analysis revealed that Post-HCRT HLA class I expression showed a significant negative relationship with LC (p<0.05. Nevertheless, multivariate analysis showed that there was no correlation between HLA class I expression and clinical outcome. CONCLUSION: HCRT increased HLA class I expression in rectal cancer patients. However, multivariate analysis failed to show any correlation between the level of HLA class I expression and prognosis.

  12. 40 CFR 53.35 - Test procedure for Class II and Class III methods for PM2.5 and PM-2.5

    Science.gov (United States)

    2010-07-01

    ... purposes of this outlier test only. (i) Calculate the quantities 2 × R1,j/(R1,j + R2,j) and 2 × R1,j/(R1,j... of the interval, (0.93, 1.07), then R2,j is an outlier. (iii) Calculate the quantities 2 × R3,j/(R3,j... site B shall be in a western city characterized by a high ratio of PM10−2.5 to PM2.5, with exposure to...

  13. Sparkle/PM3 for the modeling of europium(III), gadolinium(III), and terbium(III) complexes

    International Nuclear Information System (INIS)

    Freire, Ricardo O.; Rocha, Gerd B.; Simas, Alfredo M.

    2009-01-01

    The Sparkle/PM3 model is extended to europium(III), gadolinium(III), and terbium(III) complexes. The validation procedure was carried out using only high quality crystallographic structures, for a total of ninety-six Eu(III) complexes, seventy Gd(III) complexes, and forty-two Tb(III) complexes. The Sparkle/PM3 unsigned mean error, for all interatomic distances between the trivalent lanthanide ion and the ligand atoms of the first sphere of coordination, is: 0.080 A for Eu(III); 0.063 A for Gd(III); and 0.070 A for Tb(III). These figures are similar to the Sparkle/AM1 ones of 0.082 A, 0.061 A, and 0.068 A respectively, indicating they are all comparable parameterizations. Moreover, their accuracy is similar to what can be obtained by present-day ab initio effective core potential full geometry optimization calculations on such lanthanide complexes. Finally, we report a preliminary attempt to show that Sparkle/PM3 geometry predictions are reliable. For one of the Eu(III) complexes, BAFZEO, we created hundreds of different input geometries by randomly varying the distances and angles of the ligands to the central Eu(III) ion, which were all subsequently fully optimized. A significant trend was unveiled, indicating that more accurate local minima geometries cluster at lower total energies, thus reinforcing the validity of sparkle model calculations. (author)

  14. Differences in three-dimensional soft tissue changes after upper, lower, or both jaw orthognathic surgery in skeletal class III patients.

    Science.gov (United States)

    Verdenik, M; Ihan Hren, N

    2014-11-01

    The decision is not always straightforward as to which orthognathic procedure is best for a good aesthetic result; three-dimensional imaging has brought new insight into this topic. The aim of this prospective study was to verify objectively whether postoperative changes occur within those regions not directly affected by surgical movements of the underlying jaw bones. The study included 83 young adults with skeletal class III deformities. They were classified into three groups according to the type of surgery: bilateral sagittal split osteotomy set-back of the mandible (BSSO), Le Fort I advancement of the maxilla, or a combination of both. Pre- and postoperative optical scans were registered as regional best-fits on the areas of the foreheads and both orbits. The shell to shell differences were measured and the average distances between the observed regions were calculated. As expected, changes were greatest in the regions where the underlying bones had been moved, but regardless of the operation performed, changes were found over the whole face. Changes in the nose, cheek, and upper lip regions in the BSSO group and in the lower lip and chin region in the Le Fort I group confirmed the concept of the facial soft tissue mask acting as one unit. Copyright © 2014 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  15. Comparative study of postoperative stability between conventional orthognathic surgery and a surgery-first orthognathic approach after bilateral sagittal split ramus osteotomy for skeletal class III correction.

    Science.gov (United States)

    Mah, Deuk-Hyun; Kim, Su-Gwan; Oh, Ji-Su; You, Jae-Seek; Jung, Seo-Yun; Kim, Won-Gi; Yu, Kyung-Hwan

    2017-02-01

    The purpose of this study is to compare the postoperative stability of conventional orthognathic surgery to a surgery-first orthognathic approach after bilateral sagittal split ramus osteotomy (BSSRO). The study included 20 patients who underwent BSSRO for skeletal class III conventional orthognathic surgery and 20 patients who underwent a surgery-first orthognathic approach. Serial lateral cephalograms were analyzed to identify skeletal changes before surgery (T0), immediately after surgery (T1), and after surgery (T2, after 1 year or at debonding). The amount of relapse of the mandible in the conventional orthognathic surgery group from T1 to T2 was 2.23±0.92 mm ( P surgery-first orthognathic approach group from T1 to T2 was 3.49±1.71 mm ( P surgery-first orthognathic approach. Therefore, careful planning and skeletal stability should be considered in orthognathic surgery.

  16. Monolayer group-III monochalcogenides by oxygen functionalization: a promising class of two-dimensional topological insulators

    Science.gov (United States)

    Zhou, Si; Liu, Cheng-Cheng; Zhao, Jijun; Yao, Yugui

    2018-03-01

    Monolayer group-III monochalcogenides (MX, M = Ga, In; X = S, Se, Te), an emerging category of two-dimensional (2D) semiconductors, hold great promise for electronics, optoelectronics and catalysts. By first-principles calculations, we show that the phonon dispersion and Raman spectra, as well as the electronic and topological properties of monolayer MX can be tuned by oxygen functionalization. Chemisorption of oxygen atoms on one side or both sides of the MX sheet narrows or even closes the band gap, enlarges work function, and significantly reduces the carrier effective mass. More excitingly, InS, InSe, and InTe monolayers with double-side oxygen functionalization are 2D topological insulators with sizeable bulk gap up to 0.21 eV. Their low-energy bands near the Fermi level are dominated by the px and py orbitals of atoms, allowing band engineering via in-plane strains. Our studies provide viable strategy for realizing quantum spin Hall effect in monolayer group-III monochalcogenides at room temperature, and utilizing these novel 2D materials for high-speed and dissipationless transport devices.

  17. Uranium (III)-Plutonium (III) co-precipitation in molten chloride

    Science.gov (United States)

    Vigier, Jean-François; Laplace, Annabelle; Renard, Catherine; Miguirditchian, Manuel; Abraham, Francis

    2018-02-01

    Co-management of the actinides in an integrated closed fuel cycle by a pyrochemical process is studied at the laboratory scale in France in the CEA-ATALANTE facility. In this context the co-precipitation of U(III) and Pu(III) by wet argon sparging in LiCl-CaCl2 (30-70 mol%) molten salt at 705 °C is studied. Pu(III) is prepared in situ in the molten salt by carbochlorination of PuO2 and U(III) is then introduced as UCl3 after chlorine purge by argon to avoid any oxidation of uranium up to U(VI) by Cl2. The oxide conversion yield through wet argon sparging is quantitative. However, the preferential oxidation of U(III) in comparison to Pu(III) is responsible for a successive conversion of the two actinides, giving a mixture of UO2 and PuO2 oxides. Surprisingly, the conversion of sole Pu(III) in the same conditions leads to a mixture of PuO2 and PuOCl, characteristic of a partial oxidation of Pu(III) to Pu(IV). This is in contrast with coconversion of U(III)-Pu(III) mixtures but in agreement with the conversion of Ce(III).

  18. Intrinsic classes in the Union of European Football Associations soccer team ranking

    Science.gov (United States)

    Ausloos, Marcel

    2014-11-01

    A strong structural regularity of classes is found in soccer teams ranked by the Union of European Football Associations (UEFA) for the time interval 2009-2014. It concerns 424 to 453 teams according to the 5 competition seasons. The analysis is based on the rank-size theory considerations, the size being the UEFA coefficient at the end of a season. Three classes emerge: (i) the few "top" teams, (ii) 300 teams, (iii) the rest of the involved teams (about 150) in the tail of the distribution. There are marked empirical laws describing each class. A 3-parameter Lavalette function is used to describe the concave curving as the rank increases, and to distinguish the the tail from the central behavior.

  19. Latent Class Analysis of HIV Risk Behaviors Among Russian Women at Risk for Alcohol-Exposed Pregnancies.

    Science.gov (United States)

    Bohora, Som; Chaffin, Mark; Shaboltas, Alla; Bonner, Barbara; Isurina, Galina; Batluk, Julia; Bard, David; Tsvetkova, Larissa; Skitnevskaya, Larissa; Volkova, Elena; Balachova, Tatiana

    2017-11-01

    The number of HIV cases attributed to heterosexual contact and the proportion of women among HIV positive individuals has increased worldwide. Russia is a country with the highest rates of newly diagnosed HIV infections in the region, and the infection spreads beyond traditional risk groups. While young women are affected disproportionately, knowledge of HIV risk behaviors in women in the general population remains limited. The objectives of this study were to identify patterns of behaviors that place women of childbearing age at high risk for HIV transmission and determine whether socio-demographic characteristics and alcohol use are predictive of the risk pattern. A total of 708 non-pregnant women, aged between 18 and 44 years, who were at risk for an alcohol-exposed pregnancy were enrolled in two regions in Russia. Participants completed a structured interview focused on HIV risk behaviors, including risky sexual behavior and alcohol and drug use. Latent class analysis was utilized to examine associations between HIV risk and other demographic and alcohol use characteristics and to identify patterns of risk among women. Three classes were identified. 34.93% of participants were at high risk, combining their risk behaviors, e.g., having multiple sexual partners, with high partner's risk associated with partner's drug use (class I). Despite reporting self-perceived risk for HIV/STI, this class of participants was unlikely to utilize adequate protection (i.e., condom use). The second high risk class included 13.19% of participants who combined their risky sexual behaviors, i.e., multiple sexual partners and having STDs, with partner's risk that included partner's imprisonment and partner's sex with other women (class II). Participants in this class were likely to utilize protection/condoms. Finally, 51.88% of participants were at lower risk, which was associated primarily with their partners' risk, and these participants utilized protection (class III). The odds

  20. Class IIa histone deacetylases are hormone-activated regulators of FOXO and mammalian glucose homeostasis.

    Science.gov (United States)

    Mihaylova, Maria M; Vasquez, Debbie S; Ravnskjaer, Kim; Denechaud, Pierre-Damien; Yu, Ruth T; Alvarez, Jacqueline G; Downes, Michael; Evans, Ronald M; Montminy, Marc; Shaw, Reuben J

    2011-05-13

    Class IIa histone deacetylases (HDACs) are signal-dependent modulators of transcription with established roles in muscle differentiation and neuronal survival. We show here that in liver, class IIa HDACs (HDAC4, 5, and 7) are phosphorylated and excluded from the nucleus by AMPK family kinases. In response to the fasting hormone glucagon, class IIa HDACs are rapidly dephosphorylated and translocated to the nucleus where they associate with the promoters of gluconeogenic enzymes such as G6Pase. In turn, HDAC4/5 recruit HDAC3, which results in the acute transcriptional induction of these genes via deacetylation and activation of FOXO family transcription factors. Loss of class IIa HDACs in murine liver results in inhibition of FOXO target genes and lowers blood glucose, resulting in increased glycogen storage. Finally, suppression of class IIa HDACs in mouse models of type 2 diabetes ameliorates hyperglycemia, suggesting that inhibitors of class I/II HDACs may be potential therapeutics for metabolic syndrome. Copyright © 2011 Elsevier Inc. All rights reserved.

  1. Análise do perfil facial esquelético e de tecidos moles pré e pós-cirurgia ortognática em pacientes Classe II e III, e sua relação com a proporção áurea

    Directory of Open Access Journals (Sweden)

    Leticia Ângelo WALEWSKI

    Full Text Available Resumo Introdução A proporção áurea, representada pela razão matemática 1:1.618, tem sido investigada na especialidade Ortodontia e no procedimento de Cirurgia Ortognática, a fim de ser estabelecida como um guia de sucesso clínico relacionado à estética facial. Objetivo Verificar a estética dos perfis faciais de pacientes Classes II e III de Angle, antes e após tratamento ortodôntico-cirúrgico, além de correlacionar 13 razões dentoesqueléticas e cinco razões de tecidos moles à proporção áurea. Material e método Um total de 94 radiografias cefalométricas laterais foram analisadas, em que 13 razões dentoesqueléticas e cinco razões em tecidos moles foram medidas e comparadas ao número áureo. Adicionalmente, uma análise subjetiva da estética facial pré e pós-tratamento foi realizada por 270 examinadores. Resultado As razões dentoesqueléticas 1, 3, 6, 7, 8 e 9 aproximaram-se do número áureo após a cirurgia ortognática, nos pacientes Classe III. Para o perfil mole, apenas a razão 4 se aproximou ao número áureo, em ambos os pacientes Classe II e III. Em relação à avaliação subjetiva da estética, 91,49% dos perfis faciais foram considerados mais harmônicos após o tratamento. Conclusão Frente à metodologia usada, pode-se concluir que a proporção áurea exerce pouca influência na avaliação da estética facial, não servindo como um guia para o planejamento e o tratamento ortodôntico-ortognático.

  2. Thermodecomposition of lanthanides (III) and ytrium (III) glucoheptonates

    International Nuclear Information System (INIS)

    Giolito, J.

    1987-01-01

    The lanthanides (III) and yttrium (III) glucoheptonates as well the D-glucoheptono 1-4 lactone were studied using common analytical methods, elemental microanalysis of carbon and hydrogen, thermogravimetry and differential scanning calorimetry. These compounds were prepared from the reaction between the lanthanides (III) and yttrium (III) hydroxides and glucoheptonic acid aqueous solution obtained by means of the delta lactone hydrolysis of this acid. After stoichiometric reaction the compounds were precipitated by the addition of absolute ethanol, washed with the same solvent and dried in desiccator. Thermogravimetric the (TG) curves of the lanthanides glucoheptonates of the ceric group present thermal profiles with enough differences permitting an easy caracterization of each compound and the yttrium (III) glucoheptonate TG curve showed a great similarity with the erbium (III) compound TG curve. The differential scanning calometry (DSC) curves showed endothermic and exothermic peaks by their shape, height and position (temperature) permit an easy and rapid identification of each compound specially if DSC and TG curves were examined simultaneously. (author) [pt

  3. The Moessbauer effect in Fe(III) HEDTA, Fe(III) EDTA, and Fe(III) CDTA compounds

    International Nuclear Information System (INIS)

    Prado, F.R.

    1989-01-01

    The dependence of Moessbauer spectra with pH value of Fe(III)HEDTA and Fe(III)CDTA compounds is studied. Informations on formation processes of LFe-O-FeL (L=ligand) type dimers by the relation of titration curves of Fe(III)EDTA, Fe(III)HEDTA and Fe(III)CDTA compounds with the series of Moessbauer spectra, are obtained. Some informations on Fe-O-Fe bond structure are also obtained. Comparing the titration curves with the series of Moessbauer spectra, it is concluded that the dimerization process begins when a specie of the form FeXOH α (X = EDTA, HEDTA, CDTA; α = -1, -2) arises. (M.C.K.) [pt

  4. Suicide risk in relation to social class: a national register-based study of adult suicides in Korea, 1999-2001.

    Science.gov (United States)

    Kim, Moon-Doo; Hong, Seong-Chul; Lee, Sang-Yi; Kwak, Young-Sook; Lee, Chang-In; Hwang, Seung-Wook; Shin, Tae-Kyun; Lee, Seung-Min; Shin, Ji-Nam

    2006-03-01

    Few controlled studies have examined social class as a risk factor for suicide in Korea. The objective of the present study was to investigate the effects of social class on suicide risk in Korea. A case-control design was constructed from cause-of-death statistics for the period 1999 to 2001, in Korea, as published by the Korean National Statistical Office. The cases were defined as people aged between 20 and 64 who died by suicide, while the controls were defined as those who died of natural causes in the same age groups. The proportions and odds ratios for suicide were higher in young people than in elderly people, and higher for divorced subjects than for cohabitants. They were also higher for residents of rural areas, as opposed to residents of Seoul and other metropolitan areas, and for people in social classes III and IV, than they were for those in social class I. To control the variables that influence risk of suicide, such as age, marital status and area of residence, we used multiple logistic regression. Compared with class I, risk of suicide was higher in social classes III and IV, in both sexes. The principal conclusion of this study is that, regardless of sex, lower social class constitutes a high risk for suicide in Korea, even after controlling for variables such as age, marital status and area of residence. We conclude that a well-controlled and balanced social welfare system could reduce suicide risk, especially among people in lower social class.

  5. Balancing anisotropic curvature with gauge fields in a class of shear-free cosmological models

    Science.gov (United States)

    Thorsrud, Mikjel

    2018-05-01

    We present a complete list of general relativistic shear-free solutions in a class of anisotropic, spatially homogeneous and orthogonal cosmological models containing a collection of n independent p-form gauge fields, where p\\in\\{0, 1, 2, 3\\} , in addition to standard ΛCDM matter fields modelled as perfect fluids. Here a (collection of) gauge field(s) balances anisotropic spatial curvature on the right-hand side of the shear propagation equation. The result is a class of solutions dynamically equivalent to standard FLRW cosmologies, with an effective curvature constant Keff that depends both on spatial curvature and the energy density of the gauge field(s). In the case of a single gauge field (n  =  1) we show that the only spacetimes that admit such solutions are the LRS Bianchi type III, Bianchi type VI0 and Kantowski–Sachs metric, which are dynamically equivalent to open (Keff0 ) FLRW models, respectively. With a collection of gauge fields (n  >  1) also Bianchi type II admits a shear-free solution (Keff>0 ). We identify the LRS Bianchi type III solution to be the unique shear-free solution with a gauge field Hamiltonian bounded from below in the entire class of models.

  6. MINIFILAMENT ERUPTION AS THE SOURCE OF A BLOWOUT JET, C-CLASS FLARE, AND TYPE-III RADIO BURST

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Junchao; Jiang, Yunchun; Yang, Jiayan; Li, Haidong; Xu, Zhe, E-mail: hjcsolar@ynao.ac.cn [Yunnan Observatories, Chinese Academy of Sciences, 396 Yangfangwang, Guandu District, Kunming, 650216 (China); Center for Astronomical Mega-Science, Chinese Academy of Sciences, 20A Datun Road, Chaoyang District, Beijing, 100012 (China)

    2017-01-20

    We report a strong minifilament eruption associated with Geostationary Operational Environmental Satellite C1.6 flare and WIND type-III radio burst. The minifilament, which lies at the periphery of active region 12259, is detected by H α images from the New Vacuum Solar Telescope. The minifilament undergoes a partial and then a full eruption. Simultaneously, two co-spatial jets are successively observed in extreme ultraviolet images from the Solar Dynamic Observatory . The first jet exhibits a typical fan-spine geometry, suggesting that the co-spatial minifilament is possibly embedded in magnetic fields with a fan-spine structure. However, the second jet displays blowout morphology when the entire minifilament erupts upward, leaving behind a hard X-ray emission source in the base. Differential emission measure analyses show that the eruptive region is heated up to about 4 MK during the fan-spine jet, while up to about 7 MK during the blowout jet. In particular, the blowout jet is accompanied by an interplanetary type-III radio burst observed by WIND /WAVES in the frequency range from above 10 to 0.1 MHz. Hence, the minifilament eruption is correlated with the interplanetary type-III radio burst for the first time. These results not only suggest that coronal jets can result from magnetic reconnection initiated by erupting minifilaments with open fields, but also shed light on the potential influence of minifilament eruption on interplanetary space.

  7. A new class of spatially homogeneous 4D string backgrounds

    CERN Document Server

    Batakis, N A

    1995-01-01

    A new class of spatially homogeneous 4D string backgrounds, the X(d\\rightarrow) according to a recent classification, is presented and shown to contain only five generic types. In contrast to the case of X(d\\uparrow) (which contains as a subclass all possible FRW backgrounds), exact SO(3) isotropy is always broken in the X(d\\rightarrow) class. This is due to the H-field, whose dual is necessarily along a principal direction of anisotropy. Nevertheless, FRW symmetry can be attained asymptotically for Bianchi-types I and VII_0 in a rather appealing physical context. Other aspects of the solutions found for types X=I,II,III,VI_{-1}, and of the VII_0 case are briefly discussed.

  8. Sorption of trace amounts of gallium (III) on iron (III) oxide

    International Nuclear Information System (INIS)

    Music, S.; Gessner, M.; Wolf, R.H.H.

    1979-01-01

    The sorption of trace amounts of gallium(III) on iron(III) oxide has been studied as a function of pH. Optimum conditions have been found for the preconcentration of traces of gallium(III) by iron(III) oxide. The influence of surface active substances and of complexing agents on the sorption of trace amounts of gallium(III) on iron(III) oxide has been also studied. (orig.) [de

  9. Sorption of trace amounts of gallium (III) on iron (III) oxide

    Energy Technology Data Exchange (ETDEWEB)

    Music, S; Gessner, M; Wolf, R H.H. [Institut Rudjer Boskovic, Zagreb (Yugoslavia)

    1979-01-01

    The sorption of trace amounts of gallium(III) on iron(III) oxide has been studied as a function of pH. Optimum conditions have been found for the preconcentration of traces of gallium(III) by iron(III) oxide. The influence of surface active substances and of complexing agents on the sorption of trace amounts of gallium(III) on iron(III) oxide has been also studied.

  10. WISC-III e WAIS-III na avaliação da inteligência de cegos WISC-III/WAIS-III en ciegos WISC-III and WAIS-III in intellectual assessment of blind people

    Directory of Open Access Journals (Sweden)

    Elizabeth do Nascimento

    2007-12-01

    Full Text Available Diante da escassez de pesquisas nacionais e de testes psicológicos destinados a avaliar pessoas cegas, desenvolveu-se um estudo psicométrico com as escalas verbais dos testes WISC-III e WAIS-III. Após as adaptações de alguns estímulos e das instruções, os testes foram aplicados em crianças (N = 120 e adultos (N = 52 residentes em Belo Horizonte. Os resultados indicaram que as escalas verbais modificadas apresentam uma boa consistência interna (alfa> 0,80. Além disso, a investigação da validade fatorial identifica a presença clara de apenas um componente. Este componente explica 81% e 64% para o WISC-III e WAIS-III, respectivamente. Conclui-se que as adaptações a que se procedeu não afetaram a estrutura fatorial das escalas. Deste modo, os profissionais poderão utilizar as escalas modificadas para avaliar a inteligência de pessoas cegas.Frente a la escasez de investigaciones nacionales asi como la ausencia de tests psicológicos que evaluen personas ciegas, se ha desarrollado un estudio psicometrico com la escalas verbales del WISC-III y WAIS-III. Posteriormente a las adaptaciones de algunos estímulos y de las instrucciones, las escalas fueron aplicadas a una muestra de niños (n=120 y de adultos (n=52 residentes en la ciudad de Belo Horizonte-Brasil. Los resultados indican que las escalas verbales modificadas presentan una alta fiabilidad (alpha >0,80 asi como la presencia clara de un unico componente responsable por 81% y 64% de la variancia del WIC-III e WAIS-III respectivamente. Se ha concluido que las modificaciones efectuadas no han comprometido la estructura factorial de las escalas verbales. Por tanto, los profesionales psicólogos pueden utilizar las escalas modificadas para la evaluación de la inteligencia de personas portadoras de ceguera.Owing to the almost lack of a national research on psychological testing for the evaluation of blind people, a psychometric study has been developed with the WISC-III and WAIS-III

  11. PENGARUH METODE KOOPERATIF JIGSAW TERHADAP PRESTASI BELAJAR MATA PELAJARAN IPS PADA SISWA KELAS III

    Directory of Open Access Journals (Sweden)

    Maya Kartika Sari

    2016-11-01

    Full Text Available This study aims to determine the effect of the use of cooperative learning of jigsaw method in social studies on student achievement of class III SD Pakualaman Bantul and SD Gandok Islamiyah in 2014/2015 school year. This research design uses quantitative research methods. Collecting data in this study uses the test method. The used test methods in this research are the pre-test and post-test given to the experimental group and the control group. While the data analysis is a statistical method t test (t-test.  The results of data analysis t test (t-test obtained value = 3.34. At the significance level (α = 0.05 and with db = 38 obtained value = 1.6859. So that is 3.34 ≥ 1.6859, therefore Ho is rejected H1 accepted. The conclusion of this study is that there is an effect on the use of cooperative learning of jigsaw model in social studies on student achievement of class III SD Islamiyah Pakualaman at school year 2014/2015.   Keywords: Cooperative Model Jigsaw Type, Learning Achievement

  12. Relation between Angle Class II malocclusion and deleterious oral habits

    Directory of Open Access Journals (Sweden)

    José Tarcísio Lima Ferreira

    2012-12-01

    Full Text Available INTRODUCTION: Oral habits may interfere on the growth and development of the stomatognathic system and orofacial myofunctional conditions, producing changes in the position of teeth in their dental arches. OBJECTIVE: The purpose of this study was to verify the presence of deleterious oral habits in individuals with malocclusion and see if there is a predominance of Class II malocclusion in these individuals. METHODS: The records of 140 patients treated at the Clinic of Preventive Orthodontics FORP-USP who had already completed treatment were randomly selected and analyzed. Their ages ranged from 6 to 10 years and 11 months. Associations were made between the presence or absence of deleterious oral habits, type and number of habits found in each individual and the type of malocclusion according to Angle classification. The statistical analysis used was the Chi-square test with a significance level of 5%. History of deleterious oral habits was found in 67.1% of individuals. RESULTS: The Class I malocclusion was most frequent (82.9%, followed by Class II malocclusion (12.1% and Class III (5%. CONCLUSION: There was a predominance of Class II malocclusion in individuals with a history of deleterious oral habits.INTRODUÇÃO: hábitos bucais podem interferir no crescimento e desenvolvimento do sistema estomatognático e nas condições miofuncionais bucofaciais, acarretando alterações no posicionamento dos dentes nas respectivas arcadas dentárias. OBJETIVO: o objetivo dessa pesquisa foi verificar a presença de hábitos bucais deletérios em indivíduos portadores de má oclusão e observar se existe predominância de má oclusão Classe II de Angle nesses indivíduos. MÉTODOS: foram selecionadas, aleatoriamente, e analisadas 140 fichas de pacientes atendidos na Clínica de Ortodontia Preventiva da FORP-USP, que já haviam recebido alta no tratamento. A faixa etária variou dos 6 anos a 10 anos e 11 meses. Foram realizadas associações entre

  13. Foot-and-mouth disease virus induces autophagosomes during cell entry via a class III phosphatidylinositol 3-kinase-independent pathway.

    Science.gov (United States)

    Berryman, Stephen; Brooks, Elizabeth; Burman, Alison; Hawes, Philippa; Roberts, Rebecca; Netherton, Christopher; Monaghan, Paul; Whelband, Matthew; Cottam, Eleanor; Elazar, Zvulun; Jackson, Terry; Wileman, Thomas

    2012-12-01

    Autophagy is an intracellular pathway that can contribute to innate antiviral immunity by delivering viruses to lysosomes for degradation or can be beneficial for viruses by providing specialized membranes for virus replication. Here, we show that the picornavirus foot-and-mouth disease virus (FMDV) induces the formation of autophagosomes. Induction was dependent on Atg5, involved processing of LC3 to LC3II, and led to a redistribution of LC3 from the cytosol to punctate vesicles indicative of authentic autophagosomes. Furthermore, FMDV yields were reduced in cells lacking Atg5, suggesting that autophagy may facilitate FMDV infection. However, induction of autophagosomes by FMDV appeared to differ from starvation, as the generation of LC3 punctae was not inhibited by wortmannin, implying that FMDV-induced autophagosome formation does not require the class III phosphatidylinositol 3-kinase (PI3-kinase) activity of vps34. Unlike other picornaviruses, for which there is strong evidence that autophagosome formation is linked to expression of viral nonstructural proteins, FMDV induced autophagosomes very early during infection. Furthermore, autophagosomes could be triggered by either UV-inactivated virus or empty FMDV capsids, suggesting that autophagosome formation was activated during cell entry. Unlike other picornaviruses, FMDV-induced autophagosomes did not colocalize with the viral 3A or 3D protein. In contrast, ∼50% of the autophagosomes induced by FMDV colocalized with VP1. LC3 and VP1 also colocalized with the cellular adaptor protein p62, which normally targets ubiquitinated proteins to autophagosomes. These results suggest that FMDV induces autophagosomes during cell entry to facilitate infection, but not to provide membranes for replication.

  14. Extraction and separation studies of Ga(III, In(III and Tl(III using the neutral organophosphorous extractant, Cyanex-923

    Directory of Open Access Journals (Sweden)

    P. M. DHADKE

    2003-07-01

    Full Text Available The neutral extractant, Cyanes-923 has been used for the extraction and separation of gallium(III, indium(III and thallium(III from acidic solution. These metal ions were found to be quantitatively extracted with Cyanex-923 in toluene in the pH range 4.5–5.5, 5.0–6.5 and 1.5–3.0, respectively, and from the organic phase they can be stripped with 2.0 mol dm-3 HNO3, 3.0 mol dm-3 HNO3 and 3.0 mol dm-3 HCl, respectively. The effect of pH equilibration period, diluents, diverse ions and stripping agents on the extraction of Ga(III, In(III and Tl(III has been studied. The stroichiometry of the extracted species of these metal ions was determined on the basis of the slope analysis method. The reaction proceed by solvation and the probable extracted species found were [MCl3. 3Cyanex-923] [where M = Ga(III or In(III ] and [HTlCl4. 3Cyanex-923]. Based on these results a sequential procedure for the separation of Ga(III, In(III and Tl(III from each other was developed.

  15. 40 CFR 147.2650 - State-administered program-Class I, II, III, IV, and V wells.

    Science.gov (United States)

    2010-07-01

    ... AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) STATE, TRIBAL, AND EPA-ADMINISTERED UNDERGROUND INJECTION... Underground Injection Control Program for all classes of wells in the Commonwealth of Puerto Rico, other than...), approved by the EPA pursuant to the Safe Drinking Water Act (SDWA) section 1422. This program consists of...

  16. Potentiometric studies on some ternary complexes of Nd(III), Sm(III), Gd(III) and Ho(III) with cyclohexanediaminetetraacetic acid as primary ligand

    International Nuclear Information System (INIS)

    Marathe, D.G.; Munshi, K.N.

    1983-01-01

    The formation constants of the ternary complexes of neodymium(III), samarium(III), gadlonium(III) and holmium(III) with cyclohexanediaminetetraacetic acid (CyDTA) as primary ligand and dihydroxynaphthalene (DHN), dihydroxynaphthalene-6-sulphonic acid (DHNSA) and cateechol-3,5-disulphonic acid (CDSA) as secondary ligands have been investigated by potentiometric titration technique. The secondary ligands have been investigated by potentiometric titration technique. The values of formation constants of 1:1:1 ternary chelates are reported at three different temperatures, and at a fixed ionic strength, μ = 0.1 M (NaClO 4 ). (author)

  17. Some five-dimensional Bianchi type-iii string cosmological models in general relativity

    International Nuclear Information System (INIS)

    Samanta, G.C.; Biswal, S.K.; Mohanty, G.; Rameswarpatna, Bhubaneswar

    2011-01-01

    In this paper we have constructed some five-dimensional Bianchi type-III cosmological models in general relativity when source of gravitational field is a massive string. We obtained different classes of solutions by considering different functional forms of metric potentials. It is also observed that one of the models is not physically acceptable and the other models possess big-bang singularity. The physical and kinematical behaviors of the models are discussed

  18. Accuracy of Dolphin visual treatment objective (VTO prediction software on class III patients treated with maxillary advancement and mandibular setback

    Directory of Open Access Journals (Sweden)

    Robert J. Peterman

    2016-06-01

    Full Text Available Abstract Background Dolphin® visual treatment objective (VTO prediction software is routinely utilized by orthodontists during the treatment planning of orthognathic cases to help predict post-surgical soft tissue changes. Although surgical soft tissue prediction is considered to be a vital tool, its accuracy is not well understood in tow-jaw surgical procedures. The objective of this study was to quantify the accuracy of Dolphin Imaging’s VTO soft tissue prediction software on class III patients treated with maxillary advancement and mandibular setback and to validate the efficacy of the software in such complex cases. Methods This retrospective study analyzed the records of 14 patients treated with comprehensive orthodontics in conjunction with two-jaw orthognathic surgery. Pre- and post-treatment radiographs were traced and superimposed to determine the actual skeletal movements achieved in surgery. This information was then used to simulate surgery in the software and generate a final soft tissue patient profile prediction. Prediction images were then compared to the actual post-treatment profile photos to determine differences. Results Dolphin Imaging’s software was determined to be accurate within an error range of +/− 2 mm in the X-axis at most landmarks. The lower lip predictions were most inaccurate. Conclusions Clinically, the observed error suggests that the VTO may be used for demonstration and communication with a patient or consulting practitioner. However, Dolphin should not be useful for precise treatment planning of surgical movements. This program should be used with caution to prevent unrealistic patient expectations and dissatisfaction.

  19. Solvent effects on extraction of aluminum(III), gallium(III), and indium(III), with decanoic acid

    International Nuclear Information System (INIS)

    Yamada, Hiromichi; Hayashi, Hisao; Fujii, Yukio; Mizuta, Masateru

    1986-01-01

    Extraction of aluminum(III) and indium(III) with decanoic acid in 1-octanol was carried out at 25 deg C and at an aqueous ionic strength of 0.1 mol dm -3 (NaClO 4 ). Monomeric and tetrameric aluminum(III) decanoates and monomeric indium(III) decanoate are responsible for the extraction. From a comparison of the present results with those obtained from the previous works, the polymerization of the extracted species was found to be more extensive in benzene than in 1-octanol, and the metal decanoates were highly polymerized in the following order in both solvents: Al > Ga > In. (author)

  20. Common Mental Disorders among Occupational Groups: Contributions of the Latent Class Model

    Directory of Open Access Journals (Sweden)

    Kionna Oliveira Bernardes Santos

    2016-01-01

    Full Text Available Background. The Self-Reporting Questionnaire (SRQ-20 is widely used for evaluating common mental disorders. However, few studies have evaluated the SRQ-20 measurements performance in occupational groups. This study aimed to describe manifestation patterns of common mental disorders symptoms among workers populations, by using latent class analysis. Methods. Data derived from 9,959 Brazilian workers, obtained from four cross-sectional studies that used similar methodology, among groups of informal workers, teachers, healthcare workers, and urban workers. Common mental disorders were measured by using SRQ-20. Latent class analysis was performed on each database separately. Results. Three classes of symptoms were confirmed in the occupational categories investigated. In all studies, class I met better criteria for suspicion of common mental disorders. Class II discriminated workers with intermediate probability of answers to the items belonging to anxiety, sadness, and energy decrease that configure common mental disorders. Class III was composed of subgroups of workers with low probability to respond positively to questions for screening common mental disorders. Conclusions. Three patterns of symptoms of common mental disorders were identified in the occupational groups investigated, ranging from distinctive features to low probabilities of occurrence. The SRQ-20 measurements showed stability in capturing nonpsychotic symptoms.

  1. Differential expression of gamma-tubulin and class III beta-tubulin in medulloblastomas and human medulloblastoma cell lines

    Czech Academy of Sciences Publication Activity Database

    Caracciolo, V.; D´Agostino, L.; Dráberová, Eduarda; Sládková, Vladimíra; Crozier-Fitzgerald, C.; Agamanolis, D.P.; De Chadarévian, J.P.; Legido, A.; Giordano, A.; Dráber, Pavel; Katsetos, C.D.

    2010-01-01

    Roč. 223, č. 2 (2010), s. 519-529 ISSN 0021-9541 R&D Projects: GA AV ČR KAN200520701 Institutional research plan: CEZ:AV0Z50520514 Keywords : gamma-tubulin * beta III-tubulin * meduloblastoma Subject RIV: EB - Genetics ; Molecular Biology Impact factor: 3.986, year: 2010

  2. Semantic Analysis of Virtual Classes and Nested Classes

    DEFF Research Database (Denmark)

    Madsen, Ole Lehrmann

    1999-01-01

    Virtual classes and nested classes are distinguishing features of BETA. Nested classes originated from Simula, but until recently they have not been part of main stream object- oriented languages. C++ has a restricted form of nested classes and they were included in Java 1.1. Virtual classes...... classes and parameterized classes have been made. Although virtual classes and nested classes have been used in BETA for more than a decade, their implementation has not been published. The purpose of this paper is to contribute to the understanding of virtual classes and nested classes by presenting...

  3. Human erythrocytes and neuroblastoma cells are affected in vitro by Au(III) ions

    International Nuclear Information System (INIS)

    Suwalsky, Mario; Gonzalez, Raquel; Villena, Fernando; Aguilar, Luis F.; Sotomayor, Carlos P.; Bolognin, Silvia; Zatta, Paolo

    2010-01-01

    Gold compounds are well known for their neurological and nephrotoxic implications. However, haematological toxicity is one of the most serious toxic and less studied effects. The lack of information on these aspects of Au(III) prompted us to study the structural effects induced on cell membranes, particularly that of human erythrocytes. AuCl 3 was incubated with intact erythrocytes, isolated unsealed human erythrocyte membranes (IUM) and molecular models of the erythrocyte membrane. The latter consisted of multibilayers of dimyristoylphosphatidylcholine and dimyristoylphosphatidylethanolamine, phospholipids classes located in the outer and inner monolayers of the human erythrocyte membrane, respectively. This report presents evidence that Au(III) interacts with red cell membranes as follows: (a) in scanning electron microscopy studies on human erythrocytes it was observed that Au(III) induced shape changes at a concentration as low as 0.01 μM; (b) in isolated unsealed human erythrocyte membranes Au(III) induced a decrease in the molecular dynamics and/or water content at the glycerol backbone level of the lipid bilayer polar groups in a 5-50 μM concentration range, and (c) X-ray diffraction studies showed that Au(III) in the 10 μm-1 mM range induced increasing structural perturbation only to dimyristoylphosphatidylcholine bilayers. Additional experiments were performed in human neuroblastoma cells SH-SY5Y. A statistically significant decrease of cell viability was observed with Au(III) ranging from 0.1 μM to 100 μM.

  4. Methodology and guidelines for evaluation of welded attachments on ASME Class 1,2, or 3 piping

    International Nuclear Information System (INIS)

    Chang, K.C.; Adams, T.M.; Rodabaugh, E.C.

    1985-01-01

    The ASME Boiler and Pressure Vessel Code, Section III Subsection NB/NC/ND-3600 provides simplified rules for the evaluation and qualification of piping components. The use of rectangular and hollow, circular welded attachments (hereafter called lugs and trunions) is sometimes necessary in order to provide support for piping systems. The Code provides a set of simple and conservative equations, the associated stress indicies, and specified limitations on their applicability for lugs on Class 1 and Class 2/3 piping in Code Cases N-122 and N-318 respectively. Two new ASME Section III Code Cases, N-391 and N-392, have been prepared to provide the corresponding design guidelines for specific trunion configurations. This paper presents the background on the major concepts involved in the development of these Code Cases and provides some general guidelines to the analysts and designers for the qualification of the attachments not covered by the Code Cases

  5. Synthesis and characterization of La(III), Pr(III), Nd(III), Sm(III), Eu(III), Gd(III), Tb(III) and Dy(III) complexes of 2-acetylfuran-2-thenoylhydrazone

    International Nuclear Information System (INIS)

    Singh, B.; Singh, Praveen K.

    1998-01-01

    The reaction of 2-acetylfuran-2-thenoylhydrazone(afth) with Ln(III) trichlorides yields complexes of the type [Ln(afth)Cl 2 (H 2 O)(EtOH)]Cl, [Ln(III) = La, Pr, Nd, Sm, Eu, Gd, Tb and Dy]. The complexes have been characterized by molar conductance, magnetic susceptibility and TGA and DTA measurements, magnetic susceptibility and TGA and DTA measurements, FAB mass, infrared, proton NMR, electronic absorption and emission spectra. The terbium complex is found to be monomer from the FAB mass spectrum. The IR and NMR spectra suggest neutral tridentate behaviour of the Schiff base. A coordination number seven is proposed around the metal ions. Emission spectra suggest C 3v , symmetry around the metal ion with capped octahedron geometry for the europium complex. (author)

  6. Proteasome, transporter associated with antigen processing, and class I genes in the nurse shark Ginglymostoma cirratum: evidence for a stable class I region and MHC haplotype lineages.

    Science.gov (United States)

    Ohta, Yuko; McKinney, E Churchill; Criscitiello, Michael F; Flajnik, Martin F

    2002-01-15

    Cartilaginous fish (e.g., sharks) are derived from the oldest vertebrate ancestor having an adaptive immune system, and thus are key models for examining MHC evolution. Previously, family studies in two shark species showed that classical class I (UAA) and class II genes are genetically linked. In this study, we show that proteasome genes LMP2 and LMP7, shark-specific LMP7-like, and the TAP1/2 genes are linked to class I/II. Functional LMP7 and LMP7-like genes, as well as multiple LMP2 genes or gene fragments, are found only in some sharks, suggesting that different sets of peptides might be generated depending upon inherited MHC haplotypes. Cosmid clones bearing the MHC-linked classical class I genes were isolated and shown to contain proteasome gene fragments. A non-MHC-linked LMP7 gene also was identified on another cosmid, but only two exons of this gene were detected, closely linked to a class I pseudogene (UAA-NC2); this region probably resulted from a recent duplication and translocation from the functional MHC. Tight linkage of proteasome and class I genes, in comparison with gene organizations of other vertebrates, suggests a primordial MHC organization. Another nonclassical class I gene (UAA-NC1) was detected that is linked neither to MHC nor to UAA-NC2; its high level of sequence similarity to UAA suggests that UAA-NC1 also was recently derived from UAA and translocated from MHC. These data further support the principle of a primordial class I region with few class I genes. Finally, multiple paternities in one family were demonstrated, with potential segregation distortions.

  7. [Prevalence of cross-bite in Mexican children].

    Science.gov (United States)

    Ojeda León, S; De la Teja Angeles, E

    1990-10-01

    As observed, the problem of lining and accommodation of teeth in the child population is increasingly larger. This fact prompted the authors to attempt determining the prevalence of cross-bite in a sample of Mexican children. A total of 306 patients, aged between two and 17 and attending the Stomatology service of the National Institute of Pediatrics, were evaluated, from which all pertinent data regarding age, sex, molar-temporal relationship (terminal, rectus, distal, messial and exaggerated messial planes), permanent molar status (Angle I, II, III), cross-bite, type of dentition affected (primary, mixed or permanent), cross-bite classification (anterior, posterior or mixed), whether unilateral, bilateral, dental or skeletal, right or left, and number of teeth affected, were duly recorded. Out of 306 evaluated patients (160 males, 146 female), 112 evidenced cross-bite (36.6%), 56 of each sex; in 69.6% the teeth were anterior, in 17.8% they were posterior, and in 15.5% their position was mixed. Their average age was 8 years, and malocclusion was Angle class I. From this experience, it is to be concluded that early detection and correction of any dental occlusion abnormality will permit correcting defects in dentofacial development; it is thus necessary to ascertain the frequency of cross-bite.

  8. Yield and composition of pirarucu fillet in different weight classes = Rendimento e composição do filé de pirarucu em diferentes classes de peso

    Directory of Open Access Journals (Sweden)

    Fabíola Helena dos Santos Fogaça

    2011-01-01

    Full Text Available The fillet yield and quantity of waste generated after processing areimportant for planning and evaluating the growth performance of species and systems of aquaculture production in Brazil. The pirarucu (Arapaima gigas is among the species with desirable characteristics for intensive fish with high market value. The objective was to evaluate the performance of pirarucu fillet in different weight classes: 7.0 to 9.0 kg (group I, 11.0 to 13.0 kg (group II and 14.0 to 17.0 kg (group III. The fillet yield presented no significant difference between groups. The composition showed significantdifferences (p O rendimento de filé e a quantidade de resíduos gerada após o processamento são importantes para o planejamento e a avaliação do desempenho zootécnico de espécies e dos sistemas de produção aquícola brasileiros. O pirarucu (Arapaima gigas está entre as espécies com características desejáveis para piscicultura intensiva e com alto valor de mercado. O objetivo do trabalho foi avaliar o rendimento do filé de pirarucu em diferentes classes de peso: 7,0 a 9,0 kg (grupo I, 11,0 a 13,0 kg (grupo II e 14,0 a 17,0 kg (grupo III. O rendimento de filé não apresentou diferença significativa entre os grupos avaliados. A composição apresentou diferenças significativas (p < 0,05 para umidade (77,96 a 75,04% e cinzas (2,21 a 2,46%, enquanto os valores de lipídeos e proteína bruta foram similares entreas classes avaliadas. Na avaliação da porcentagem de lipídios por porção (lombo, barriga e cauda houve maior deposição de gordura na parte ventral e no grupo III. Dessa forma, pode-se abater o pirarucu com média de peso entre 7,0 a 9,0 kg, utilizando-se ciclos de produção mais curtos e obtendo-se filés com melhor qualidade por apresentarem menor porcentagem muscular de lipídio.

  9. Preparation and characterisation of mixed ligand complexes of Co(III), Fe(III) and Cr(III) containing phthalimide and phenols

    International Nuclear Information System (INIS)

    Miah, M.A.J.; Islam, M.S.; Pal, S.C.; Barma, T.K.

    1996-01-01

    Some novel mixed ligand complexes of Co(III), Fe(III) and Cr(III) containing phthalimide as primary and 2-aminophenol and 3-aminophenol as secondary ligands have been synthesized and characterised on the basis of elemental analyses, conductivity and magnetic measurements and infrared and electronic spectral studies. Complexes containing 2-aminophenol are 1:1 electrolyte in N,N dimethylformamide. Spectral studies indicate that all the complexes exhibit octahedral geometry. The complexes have the general composition; K[M(pim)/sub 2/(L)/sub 2/]; where m=Co(III), Fe(III) and Cr(III), pim-anion of phthalimamide and L=anion of 2-aminophenol and 3-aminophenol. (author)

  10. Research and design of hanger and support series of nuclear safety class process piping

    International Nuclear Information System (INIS)

    Mao Chengzhang; Shi Jiemin

    1995-12-01

    Hangers and supports of nuclear safety class piping are an important part of primary system piping in a nuclear power plant. They will directly affect the reliability of operation, the period at construction and the investment for a nuclear power plant. It is an absolutely necessary job for Pakistan Chashma Nuclear Power Plant Project to research and design a series of piping supports in accordance with ASME-III NF. It is also an important designing for developing nuclear power plant later in China. After working over two years, a series of piping supports of nuclear safety class which have 57 types and more than 2460 specifications have been designed. This series is perfect, and can satisfy the requirements of piping final designing for nuclear power plant. This series of hangers and supports is mainly used in the process piping of nuclear safety class 1,2,3. They can also be used in other piping of nuclear safety class and piping with aseismic requirement of non-nuclear safety class

  11. Gender roles and binge drinking among Latino emerging adults: a latent class regression analysis.

    Science.gov (United States)

    Vaughan, Ellen L; Wong, Y Joel; Middendorf, Katharine G

    2014-09-01

    Gender roles are often cited as a culturally specific predictor of drinking among Latino populations. This study used latent class regression to test the relationships between gender roles and binge drinking in a sample of Latino emerging adults. Participants were Latino emerging adults who participated in Wave III of the National Longitudinal Study of Adolescent Health (N = 2,442). A subsample of these participants (n = 660) completed the Bem Sex Role Inventory--Short. We conducted latent class regression using 3 dimensions of gender roles (femininity, social masculinity, and personal masculinity) to predict binge drinking. Results indicated a 3-class solution. In Class 1, the protective personal masculinity class, personal masculinity (e.g., being a leader, defending one's own beliefs) was associated with a reduction in the odds of binge drinking. In Class 2, the nonsignificant class, gender roles were not related to binge drinking. In Class 3, the mixed masculinity class, personal masculinity was associated with a reduction in the odds of binge drinking, whereas social masculinity (e.g., forceful, dominant) was associated with an increase in the odds of binge drinking. Post hoc analyses found that females, those born outside the United States, and those with greater English language usage were at greater odds of being in Class 1 (vs. Class 2). Males, those born outside the United States, and those with greater Spanish language usage were at greater odds of being in Class 3 (vs. Class 2). Directions for future research and implications for practice with Latino emerging adults are discussed.

  12. Reliability based code calibration of fatigue design criteria of nuclear Class-1 piping

    International Nuclear Information System (INIS)

    Mishra, J.; Balasubramaniyan, V.; Chellapandi, P.

    2016-01-01

    Fatigue design of Class-l piping of NPP is carried out using Section-III of American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel code. The fatigue design criteria of ASME are based on the concept of safety factor, which does not provide means for the management of uncertainties for consistently reliable and economical designs. In this regards, a work is taken up to estimate the implicit reliability level associated with fatigue design criteria of Class-l piping specified by ASME Section III, NB-3650. As ASME fatigue curve is not in the form of analytical expression, the reliability level of pipeline fittings and joints is evaluated using the mean fatigue curve developed by Argonne National Laboratory (ANL). The methodology employed for reliability evaluation is FORM, HORSM and MCS. The limit state function for fatigue damage is found to be sensitive to eight parameters, which are systematically modelled as stochastic variables during reliability estimation. In conclusion a number of important aspects related to reliability of various piping product and joints are discussed. A computational example illustrates the developed procedure for a typical pipeline. (author)

  13. Alteration of BRCA1 expression affects alcohol-induced transcription of RNA Pol III-dependent genes.

    Science.gov (United States)

    Zhong, Qian; Shi, Ganggang; Zhang, Yanmei; Lu, Lei; Levy, Daniel; Zhong, Shuping

    2015-02-01

    Emerging evidence has indicated that alcohol consumption is an established risk factor for breast cancer. Deregulation of RNA polymerase III (Pol III) transcription enhances cellular Pol III gene production, leading to an increase in translational capacity to promote cell transformation and tumor formation. We have reported that alcohol intake increases Pol III gene transcription to promote cell transformation and tumor formation in vitro and in vivo. Studies revealed that tumor suppressors, pRb, p53, PTEN and Maf1 repress the transcription of Pol III genes. BRCA1 is a tumor suppressor and its mutation is tightly related to breast cancer development. However, it is not clear whether BRCA1 expression affects alcohol-induced transcription of Pol III genes. At the present studies, we report that restoring BRCA1 in HCC 1937 cells, which is a BRCA1 deficient cell line, represses Pol III gene transcription. Expressing mutant or truncated BRCA1 in these cells does not affect the ability of repression on Pol III genes. Our analysis has demonstrated that alcohol induces Pol III gene transcription. More importantly, overexpression of BRCA1 in estrogen receptor positive (ER+) breast cancer cells (MCF-7) decreases the induction of tRNA(Leu) and 5S rRNA genes by alcohol, whereas reduction of BRCA1 by its siRNA slightly increases the transcription of the class of genes. This suggests that BRCA1 is associated with alcohol-induced deregulation of Pol III genes. These studies for the first time demonstrate the role of BRCA1 in induction of Pol III genes by alcohol and uncover a novel mechanism of alcohol-associated breast cancer. Copyright © 2014 Elsevier B.V. All rights reserved.

  14. [Alveolar bone thickness and root length changes in the treatment of skeletal Class III patients facilitated by improved corticotomy: a cone-beam CT analysis].

    Science.gov (United States)

    Wu, Jiaqi; Jiang, Jiuhui; Xu, Li; Liang, Cheng; Li, Cuiying; Xu, Xiao

    2015-04-01

    To evaluate the alveolar bone thickness and root length changes of anterior teeth with cone-beam computed tomography (CBCT). CBCT scans were taken for 12 skeletal Class III patients who accepted the improved corticotomy (IC) procedures during pre-surgical orthodontics. The CBCT data in T1 (the maxillary dental arch was aligned and leveled) and T2 (extraction space closure) were superimposed and the alveolar bone thickness at root apex level and root length measurements were done. From T1 to T2, the buccal alveolar bone thickness for the upper lateral incisors increased from (1.89±0.83) to (2.47±1.02) mm (P<0.05), and for central incisors and for canines from (2.32±0.71) to (2.68±1.48) mm and from (2.28±1.08) to (2.41±1.40) mm, respectively. According to Sharpe Grading System, the root resorption grade for 69 teeth of 72 was located in Grade 1, two teeth in Grade 2, one tooth in Grade 3. The improved corticotomy had the potential to increase the buccal alveolar bone thickness and the root resorption in most teeth was in Grade 1 according to Sharpe grading system.

  15. Technetium electrochemistry. 7. Electrochemical and spectroelectrochemical studies on technetium(III) and -(II) complexes containing polypyridyl ligands

    International Nuclear Information System (INIS)

    Wilcox, B.E.; Deutsch, E.

    1991-01-01

    The redox properties of a series of technetium(III/II) complexes of the general formula cis(X), trans(P)-[Tc III/II X 2 (PR w R') 2 L] 10+ , where X = Cl or Br, PR 2 R' = dimethylphenylphosphine or ethyldiphenylphosphine, and L = 2,2'-bipyridine (bpy), 4,4'-dimethyl-2,2'-bipyridine (Me 2 bpy), or 1,10-phenanthroline (phen), were investigated in 0.1 M TEAP/acetonitrile by cyclic voltammetry at a platinum-disk electrode. These complexes exhibit diffusion-controlled, 1-equiv Tc(IV)/Tc(III) redox couples and also Tc(III)/Tc(II) redox couples. Spectropotentiostatic experiments on three complexes of this class in 0.5 M TEAP/DMF confirm the 1-equiv character of the Tc(III)/Tc(II) couple. The electrochemical behavior of Tc(II) complexes of the general formula trans(P)-[TcX(PR 2 R') 2 terpy] + , terpy = 2,2':6',2 double-prime-terpyridine, was also investigated under the same conditions as above. These complexes exhibit diffusion-controlled, 1-equiv Tc(III)/Tc(II) redox couples and Tc(II)/Tc(I) redox couples. Spectropotentiostatic experiments on trans(P)-[TcCl(PMe 2 Ph) 2 terpy] + confirm the 1-equiv character of the Tc(III)/Tc(II) couple but show that the Tc(II)/Tc(I) couple is not reversible on the spectropotentiostatic time scale

  16. Perceived psychological pressure at work, social class, and risk of stroke: a 30-year follow-up in Copenhagen male study.

    Science.gov (United States)

    Suadicani, Poul; Andersen, Lars L; Holtermann, Andreas; Mortensen, Ole S; Gyntelberg, Finn

    2011-12-01

    Investigate if the association between perceived psychological work pressure and risk of stroke is modified by socioeconomic status. Thirty-year follow-up of 4943 middle-aged men without cardiovascular disease. In the higher social classes (I, II, and III), perceived regular exposure to psychological work pressure was common and a significant predictor of stroke; almost 10% of the stroke events could be attributed to this exposure in the higher social classes; among lower social classes (IV and V), perceived psychological pressure was no predictor at all. Regular psychological work pressure is a highly prevalent and independent risk factor for stroke among men in higher social classes. In contrast, no association to stroke risk was found among low social class men.

  17. New Tunneling Features in Polar III-Nitride Resonant Tunneling Diodes

    Directory of Open Access Journals (Sweden)

    Jimy Encomendero

    2017-10-01

    Full Text Available For the past two decades, repeatable resonant tunneling transport of electrons in III-nitride double barrier heterostructures has remained elusive at room temperature. In this work we theoretically and experimentally study III-nitride double-barrier resonant tunneling diodes (RTDs, the quantum transport characteristics of which exhibit new features that are unexplainable using existing semiconductor theory. The repeatable and robust resonant transport in our devices enables us to track the origin of these features to the broken inversion symmetry in the uniaxial crystal structure, which generates built-in spontaneous and piezoelectric polarization fields. Resonant tunneling transport enabled by the ground state as well as by the first excited state is demonstrated for the first time over a wide temperature window in planar III-nitride RTDs. An analytical transport model for polar resonant tunneling heterostructures is introduced for the first time, showing a good quantitative agreement with experimental data. From this model we realize that tunneling transport is an extremely sensitive measure of the built-in polarization fields. Since such electric fields play a crucial role in the design of electronic and photonic devices, but are difficult to measure, our work provides a completely new method to accurately determine their magnitude for the entire class of polar heterostructures.

  18. Simulation of final states in ep and eA collisions at the LHeC using DPMJET-III

    CERN Document Server

    Armesto, N

    2010-01-01

    $e$p and $e$Pb collisions at the LHeC are simulated using DPMJET-III. Four events classes: inclusive, inelastic non-diffractive, single diffractive on the photon side and coherently diffractive, are generated. Particle and energy pseudorapidity distributions, and distributions on forward neutron multiplicity and rapidity gap existence, are shown.

  19. Juvenile idiopathic arthritis (JIA): a screening study to measure class II skeletal pattern, TMJ PDS and use of systemic corticosteroids.

    LENUS (Irish Health Repository)

    Mandall, Nicky A

    2010-03-01

    To screen patients with oligoarticular and polyarticular forms of Juvenile Idiopathic Arthritis (JIA) to determine (i) the severity of their class II skeletal pattern; (ii) temporomandibular joint signs and symptoms and (iii) use of systemic corticosteroids.

  20. Thermodynamic data for predicting concentrations of Pu(III), Am(III), and Cm(III) in geologic environments

    Energy Technology Data Exchange (ETDEWEB)

    Rai, Dhanpat; Rao, Linfeng; Weger, H.T.; Felmy, A.R. [Pacific Northwest National Laboratory, WA (United States); Choppin, G.R. [Florida State University, Florida (United States); Yui, Mikazu [Japan Nuclear Cycle Development Inst., Tokai Works, Tokai, Ibaraki (Japan)

    1999-01-01

    This report provides thermodynamic data for predicting concentrations of Pu(III), Am(III), and Cm(III) in geologic environments, and contributes to an integration of the JNC chemical thermodynamic database, JNC-TDB (previously PNC-TDB), for the performance analysis of geological isolation system for high-level radioactive wastes. Thermodynamic data for the formation of complexes or compounds with hydroxide, chloride, fluoride, carbonate, nitrate, sulfate and phosphate are discussed in this report. Where data for specific actinide(III) species are lacking, the data were selected based on chemical analogy to other trivalent actinides. In this study, the Pitzer ion-interaction model is mainly used to extrapolate thermodynamic constants to zero ionic strength at 25degC. (author)

  1. Luminescence study on solvation of americium(III), curium(III) and several lanthanide(III) ions in nonaqueous and binary mixed solvents

    International Nuclear Information System (INIS)

    Kimura, T.; Nagaishi, R.; Kato, Y.; Yoshida, Z.

    2001-01-01

    The luminescence lifetimes of An(III) and Ln(III) ions [An=Am and Cm; Ln=Nd, Sm, Eu, Tb and Dy] were measured in dimethyl sulfoxide(DMSO), N,N-dimethylformamide(DMF), methanol(MeOH), water and their perdeuterated solvents. Nonradiative decay rates of the ions were in the order of H 2 O > MeOH > DMF > DMSO, indicating that O-H vibration is more effective quencher than C-H, C=O, and S=O vibrations in the solvent molecules. Maximal lifetime ratios τ D /τ H were observed for Eu(III) in H 2 O, for Sm(III) in MeOH and DMF, and for Sm(III) and Dy(III) in DMSO. The solvent composition in the first coordination sphere of Cm(III) and Ln(III) in binary mixed solvents was also studied by measuring the luminescence lifetime. Cm(III) and Ln(III) were preferentially solvated by DMSO in DMSO-H 2 O, by DMF in DMF-H 2 O, and by H 2 O in MeOH-H 2 O over the whole range of the solvent composition. The order of the preferential solvation, i.e., DMSO > DMF > H 2 O > MeOH, correlates with the relative basicity of these solvents. The Gibbs free energy of transfer of ions from water to nonaqueous solvents was further estimated from the degree of the preferential solvation. (orig.)

  2. Luminescence studies of Sm(III) and Cm(III) complexes in NaSCN/DHDECMP extraction systems

    CERN Document Server

    Chung, D Y; Kimura, T

    1999-01-01

    Laser-induced fluorescence (LIF) studies of Sm(III) and Cm(III) complexes in the NaSCN/DHDECMP solvent extraction system were carried out. Luminescence lifetimes were measured to determine the number of water molecules coordinated to Sm(III), Tb(III), Dy(III), and Cm(III) in the sodium thiocyanate solution and in the DHDECMP phase. The hydration number of Sm(III), Tb(III), Dy(III), and Cm(III) in the sodium thiocyanate solution decreased linearly with increasing sodium thiocyanate concentration. The hydration numbers of Sm(III), Dy(III), and Cm(III) in the DHDECMP phase decreased with increasing sodium thiocyanate concentration. The water molecules in the inner coordination sphere of Sm(III) and Dy(III) extracted into the DHDECMP were not completely removed at low sodium thiocyanate concentration but decreased with increasing sodium thiocyanate concentration. However, in the case of Cm(III) extracted into the DHDECMP phase from the sodium thiocyanate solution, there was no water in the inner coordination sphe...

  3. Class prediction for high-dimensional class-imbalanced data

    Directory of Open Access Journals (Sweden)

    Lusa Lara

    2010-10-01

    Full Text Available Abstract Background The goal of class prediction studies is to develop rules to accurately predict the class membership of new samples. The rules are derived using the values of the variables available for each subject: the main characteristic of high-dimensional data is that the number of variables greatly exceeds the number of samples. Frequently the classifiers are developed using class-imbalanced data, i.e., data sets where the number of samples in each class is not equal. Standard classification methods used on class-imbalanced data often produce classifiers that do not accurately predict the minority class; the prediction is biased towards the majority class. In this paper we investigate if the high-dimensionality poses additional challenges when dealing with class-imbalanced prediction. We evaluate the performance of six types of classifiers on class-imbalanced data, using simulated data and a publicly available data set from a breast cancer gene-expression microarray study. We also investigate the effectiveness of some strategies that are available to overcome the effect of class imbalance. Results Our results show that the evaluated classifiers are highly sensitive to class imbalance and that variable selection introduces an additional bias towards classification into the majority class. Most new samples are assigned to the majority class from the training set, unless the difference between the classes is very large. As a consequence, the class-specific predictive accuracies differ considerably. When the class imbalance is not too severe, down-sizing and asymmetric bagging embedding variable selection work well, while over-sampling does not. Variable normalization can further worsen the performance of the classifiers. Conclusions Our results show that matching the prevalence of the classes in training and test set does not guarantee good performance of classifiers and that the problems related to classification with class

  4. Teacher's Questions in Reading Classes

    Directory of Open Access Journals (Sweden)

    Zuliati Rohmah

    2002-01-01

    Full Text Available Abstract: The present paper discusses an English teacher's questions in Reading classes at MAN Malang III. Types of questions, functions of teacher's questions, question levels and the strategies applied by the teacher were put as the research problems. Non-participant observa­tion was applied to collect the data with the researcher as the main in­strument aided by field-notes and a tape recorder. It was found that the distribution of the questions did not allow the students to talk longer and to think more analytically. Meanwhile, the strategies applied by the teacher helped the students to respond to the questions previously unanswered. The teacher is suggested to produce more open and refer­ential question as well as inference and evaluation questions as to give more chances for the students to think aloud more.

  5. Association of Eu(III) and Cm(III) with Bacillus subtilis and Halobacterium salinarum

    International Nuclear Information System (INIS)

    Ozaki, Takuo; Kimura, Takaumi; Ohnuki, Toshihiko; Yoshida, Zenko

    2002-01-01

    Adsorption behavior of Eu(III) and Cm(III) by Bacillus subtilis and Halobacterium salinarum was investigated. Both microorganisms showed almost identical pH dependence on the distribution ratio (K d ) of the metals examined, i.e., K d of Eu(III) and Cm(III) increased with an increase of pH. The coordination state of Eu(III) adsorbed on the microorganisms was studied by time-resolved laser-induced fluorescence spectroscopy (TRLFS). The coordination states of Eu(III) adsorbed on the B. subtilis and H. salinarum was of different characteristics. H. salinarum exhibited more outer-spherical interaction with Eu(III) than B. subtilis. (author)

  6. On the removal of hexavalent chromium from a Class F fly ash.

    Science.gov (United States)

    Huggins, F E; Rezaee, M; Honaker, R Q; Hower, J C

    2016-05-01

    Coarse and fine samples of a Class F fly ash obtained from commercial combustion of Illinois bituminous coal have been exposed to two long-term leaching tests designed to simulate conditions in waste impoundments. ICP-AES analysis indicated that the coarse and fine fly ash samples contained 135 and 171mg/kg Cr, respectively. Measurements by XAFS spectroscopy showed that the ash samples originally contained 5 and 8% of the chromium, respectively, in the hexavalent oxidation state, Cr(VI). After exposure to water for more than four months, the percentage of chromium as Cr(VI) in the fly-ash decreased significantly for the coarse and fine fly-ash in both tests. Combining the XAFS data with ICP-AES data on the concentration of chromium in the leachates indicated that, after the nineteen-week-long, more aggressive, kinetic test on the coarse fly ash, approximately 60% of the Cr(VI) had been leached, 20% had been reduced to Cr(III) and retained in the ash, and 20% remained as Cr(VI) in the ash. In contrast, during the six-month-long baseline test, very little Cr was actually leached from either the coarse or the fine fly-ash (ash was retained in the ash in that form, while the remainder, 34% and 80%, respectively, was reduced and retained in the ash as Cr(III). The results are interpreted as indicating that Cr(VI) present in Class F fly-ash can be reduced to Cr(III) when in contact with water and that such chemical reduction can compete with physical removal of Cr(VI) from the ash by aqueous leaching. Copyright © 2016 Elsevier Ltd. All rights reserved.

  7. Sorption of small amounts of europium(III) on iron(III) hydroxide and oxide

    International Nuclear Information System (INIS)

    Music, S.; Gessner, M.; Wolf, R.H.H.

    1979-01-01

    The sorption of small amounts of europium(III) on iron(III) hydroxide and oxide has been studied as a function of pH. The mechanism of sorption is discussed. Optimum conditions have been found for the preconcentration of small or trace amounts of europium(III) by iron(III) hydroxide and oxide. The influence of complexing agents (EDTA, oxalate, tartrate and 5-sulfosalicylic acid) on the sorption of small amounts of europium(III) on iron(III) oxide has also been studied. (author)

  8. Evaluation of conservatisms and environmental effects in ASME Code, Section III, Class 1 fatigue analysis

    International Nuclear Information System (INIS)

    Deardorff, A.F.; Smith, J.K.

    1994-08-01

    This report documents the results of a study regarding the conservatisms in ASME Code Section 3, Class 1 component fatigue evaluations and the effects of Light Water Reactor (LWR) water environments on fatigue margins. After review of numerous Class 1 stress reports, it is apparent that there is a substantial amount of conservatism present in many existing component fatigue evaluations. With little effort, existing evaluations could be modified to reduce the overall predicted fatigue usage. Areas of conservatism include design transients considerably more severe than those experienced during service, conservative grouping of transients, conservatisms that have been removed in later editions of Section 3, bounding heat transfer and stress analysis, and use of the ''elastic-plastic penalty factor'' (K 3 ). Environmental effects were evaluated for two typical components that experience severe transient thermal cycling during service, based on both design transients and actual plant data. For all reasonable values of actual operating parameters, environmental effects reduced predicted margins, but fatigue usage was still bounded by the ASME Section 3 fatigue design curves. It was concluded that the potential increase in predicted fatigue usage due to environmental effects should be more than offset by decreases in predicted fatigue usage if re-analysis were conducted to reduce the conservatisms that are present in existing component fatigue evaluations

  9. Dependent Classes

    DEFF Research Database (Denmark)

    Gasiunas, Vaidas; Mezini, Mira; Ostermann, Klaus

    2007-01-01

    of dependent classes and a machine-checked type soundness proof in Isabelle/HOL [29], the first of this kind for a language with virtual classes and path-dependent types. [29] T.Nipkow, L.C. Poulson, and M. Wenzel. Isabelle/HOL -- A Proof Assistant for Higher-Order Logic, volume 2283 of LNCS, Springer, 2002......Virtual classes allow nested classes to be refined in subclasses. In this way nested classes can be seen as dependent abstractions of the objects of the enclosing classes. Expressing dependency via nesting, however, has two limitations: Abstractions that depend on more than one object cannot...... be modeled and a class must know all classes that depend on its objects. This paper presents dependent classes, a generalization of virtual classes that expresses similar semantics by parameterization rather than by nesting. This increases expressivity of class variations as well as the flexibility...

  10. Structural, magnetic and electronic properties of rare earth ternary oxides Li Ln(II) 2 Ln(III)O4

    International Nuclear Information System (INIS)

    Malki, M.

    1987-06-01

    Properties of a new class of rare earth ternary oxides Li Ln(II) 2 Ln(III)O 4 where Ln(II) is a divalent metal (Sr, Eu) and Ln(III) a trivalent rare earth (Eu, Gd, Dy, Er and Y). These orthorhombic compounds (type Li Eu 3 O 4 ) allow the study of many magnetic phenomena and their evolution in function of the nature of Ln(II) and Ln(III): diamagnetic ions Sr 2+ , Y 3+ ; isotrope magnetic ions: Eu 2+ , Gd 3+ and anisotrope magnetic ions Dy 3+ , Er 3+ . Magnetic and electric properties are obtained by classical techniques and from hyperfine interaction by Moessbauer spectroscopy. The possibility to use several Moessbauer resonance (nuclei Eu 151, Gd 155, Dy 161 and Er 166) completes informations obtained by the macroscopic study [fr

  11. A Study on the Determination of Power Supply Class for HVAC System in KJRR

    International Nuclear Information System (INIS)

    Kim, Hagtae; Kim, Minjin; Suh, Yong-Suk; Kim, Jun-Yeon; Chae, Hee-Taek

    2016-01-01

    The purpose of this paper is to propose an appropriate electrical class, power supply class, and operation logic for the major equipment of the HVAC system such as a Confinement Isolation Damper (CID), Fission Molybdenum Isolation Damper (FID), Air Handling Unit (AHU), Air Cleaning Unit (ACU), and Contaminated Air Purification System (CAPS) in light of their functional requirements and importance. The classification for the overall HVAC system of the KJRR is a safety class NNS, Non-Seismic category, quality class S, and electrical class Non-1E. Exceptionally, the CID and FID are safety class 3, seismic category I, and quality class Q. The electrical class for the major equipment of the HVAC system should be determined considering the operation concept during Loss of Normal Electric Power (LOEP) regardless of the safety class. In this paper, the electrical and power supply class is determined and the operation logic is proposed for the major equipment of the HVAC system for the KJRR such as the CID, FID, CAPS, ACU, and AHU. The electrical class Non-1E is determined to implement a fail closed for the enhancement of safety. The power supply class is based on the functional requirements of each equipment. The CID, FID, CAPS, and ACU are Class III, but the AHU is Class IV by reflecting the importance and electrical load. After the recovery of the power supply, there is a difference in the operation concept for the HVAC system between the reactor building and fission molybdenum production building depending on the operator's residence time. The CID and CAPS are operated manually through procedures for checking the accident status, and the FID and ACU are operated automatically without special procedures

  12. A Study on the Determination of Power Supply Class for HVAC System in KJRR

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hagtae; Kim, Minjin; Suh, Yong-Suk; Kim, Jun-Yeon; Chae, Hee-Taek [KAERI, Daejeon (Korea, Republic of)

    2016-05-15

    The purpose of this paper is to propose an appropriate electrical class, power supply class, and operation logic for the major equipment of the HVAC system such as a Confinement Isolation Damper (CID), Fission Molybdenum Isolation Damper (FID), Air Handling Unit (AHU), Air Cleaning Unit (ACU), and Contaminated Air Purification System (CAPS) in light of their functional requirements and importance. The classification for the overall HVAC system of the KJRR is a safety class NNS, Non-Seismic category, quality class S, and electrical class Non-1E. Exceptionally, the CID and FID are safety class 3, seismic category I, and quality class Q. The electrical class for the major equipment of the HVAC system should be determined considering the operation concept during Loss of Normal Electric Power (LOEP) regardless of the safety class. In this paper, the electrical and power supply class is determined and the operation logic is proposed for the major equipment of the HVAC system for the KJRR such as the CID, FID, CAPS, ACU, and AHU. The electrical class Non-1E is determined to implement a fail closed for the enhancement of safety. The power supply class is based on the functional requirements of each equipment. The CID, FID, CAPS, and ACU are Class III, but the AHU is Class IV by reflecting the importance and electrical load. After the recovery of the power supply, there is a difference in the operation concept for the HVAC system between the reactor building and fission molybdenum production building depending on the operator's residence time. The CID and CAPS are operated manually through procedures for checking the accident status, and the FID and ACU are operated automatically without special procedures.

  13. Sinus lifting before Le Fort I maxillary osteotomy: a suitable method for oral rehabilitation of edentulous patients with skelettal class-III conditions: review of the literature and report of a case

    Directory of Open Access Journals (Sweden)

    Meyer Ulrich

    2007-01-01

    Full Text Available Abstract Background Functional rehabilitation of patients afflicted with severe mandibular and maxillary alveolar atrophy might be challenging especially in malformed patients. Methods Treatment planning using sinus lifting and implant placement before Le Fort I maxillary osteotomy in a patient with severe mandibular and posterior maxillary alveolar atrophy and skelettal class-III conditions due to cleft palate are described. Results A full functional and esthetic rehabilitation of the patient was achieved by a stepwise surgical approach performed through sinus lifting as the primary approach followed by implant placement and subsequent Le Fort I maxillary osteotomy to correct the maxillo-mandibular relation. Conclusion Stabilisation of the maxillary complex by a sinus lifting procedure in combination with computer aided implant placement as preorthodontic planning procedure before Le Fort I maxillary osteotomy seems to be suitable in order to allow ideal oral rehabilitation especially in malformed patients.

  14. Effects upon metabolic pathways and energy production by Sb(III and As(III/Sb(III-oxidase gene aioA in Agrobacterium tumefaciens GW4.

    Directory of Open Access Journals (Sweden)

    Jingxin Li

    Full Text Available Agrobacterium tumefaciens GW4 is a heterotrophic arsenite [As(III]/antimonite [Sb(III]-oxidizing strain. The As(III oxidase AioAB is responsible for As(III oxidation in the periplasm and it is also involved in Sb(III oxidation in Agrobacterium tumefaciens 5A. In addition, Sb(III oxidase AnoA and cellular H2O2 are also responsible for Sb(III oxidation in strain GW4. However, the deletion of aioA increased the Sb(III oxidation efficiency in strain GW4. In the present study, we found that the cell mobility to Sb(III, ATP and NADH contents and heat release were also increased by Sb(III and more significantly in the aioA mutant. Proteomics and transcriptional analyses showed that proteins/genes involved in Sb(III oxidation and resistance, stress responses, carbon metabolism, cell mobility, phosphonate and phosphinate metabolism, and amino acid and nucleotide metabolism were induced by Sb(III and were more significantly induced in the aioA mutant. The results suggested that Sb(III oxidation may produce energy. In addition, without periplasmic AioAB, more Sb(III would enter bacterial cells, however, the cytoplasmic AnoA and the oxidative stress response proteins were significantly up-regulated, which may contribute to the increased Sb(III oxidation efficiency. Moreover, the carbon metabolism was also activated to generate more energy against Sb(III stress. The generated energy may be used in Sb transportation, DNA repair, amino acid synthesis, and cell mobility, and may be released in the form of heat.

  15. Social class, political power, and the state: their implications in medicine--part III.

    Science.gov (United States)

    Navarro, V

    1977-01-01

    This is the third part of an article on the distribution of power and the nature of the state in Western industrialized societies and their implications in medicine. Parts I and II were published in the preceding issue of this Journal. Part I presented a critique of contemporary theories of the Western system of power; discussed the countervailing pluralist and power of elite theories, as well as those of bureaucratic and professional control; and concluded with an examination of the Marxist theories of economic determinism, structural determinism, and corporate statism. Part II presented a Marxist theory of the role, nature, and characteristics of state intervention. Part III focuses on the mode of that intervention and the reasons for its growth, with an added analysis of the attributes of state intervention in the health sector, and of the dialectical relationship between its growth and the current fiscal crisis of the state. In all three parts, the focus is on Western European countries and on North America, with many examples and categories from the area of medicine.

  16. Validation and predictive power of radiation therapy oncology group (RTOG) recursive partitioning analysis classes for malignant glioma patients: a report using RTOG 90-06

    International Nuclear Information System (INIS)

    Scott, Charles B.; Scarantino, Charles; Urtasun, Raul; Movsas, Benjamin; Jones, Christopher U.; Simpson, Joseph R.; Fischbach, A. Jennifer; Curran, Walter J.

    1996-01-01

    Background/Purpose: The recursive partitioning analysis (RPA) classes for malignant glioma patients were previously established by Curran et al. (JNCI 85:704-10, 1993) using data on over 1500 patients from the Radiation Therapy Oncology Group (RTOG). The current analysis was to validate the RPA classes on a new dataset (RTOG 90-06) and determine the predictive power of the RPA classes. Patients and Methods: There are six RPA classes for malignant glioma patients that comprise distinct groups of patients with significantly different survival outcome. RTOG 90-06 is a randomized phase III study of 712 patients accrued from 1990 to 1994. The minimum potential follow-up is 18 months. The treatment arms were combined for the purpose of this analysis. There were 84, 13, 105, 240, 150, and 23 patients in the six RPA classes from RTOG 90-06. Results: The median survival times (MST) and two-year survivals for the six RPA classes in RTOG 90-06 are compared to those published by Curran et al. (JNCI 1993). The RPA classes appear in descending order in the following table. The MST and 2-year survivals for the RTOG RPA classes were within 95% confidence intervals of the 90-06 estimates for classes I, III, IV, and V. The RPA classes explained 43% of the variation (squared error loss). By comparison, a model containing only histology explains only 13% of the variation. The RPA classes are statistically distinct with all comparisons exceeding 0.0001, except those involving class II. Conclusion: The validity of the model is verified by the reliability of the RPA classes to define distinct groups with respect to survival. Further evidence is given by prediction of MST and 2-year survival for all classes except class II. The RPA classes explained a good portion of the variation in the data. RPA class II did not perform well which may be an artifact of the small sample size or an indication that this class is not distinct. The validation of the RPA classes attests to their usefulness as

  17. Mixed ligand complexes of some of the rare earths. La(III)-, Pr(III)- or Nd-(III)-CDTA-Hydroxy Acids

    Energy Technology Data Exchange (ETDEWEB)

    Rana, H S; Tandon, J P [Rajasthan Univ., Jaipur (India). Chemical Labs.

    1975-11-01

    Biligand complexes of the 1:1 Ln(III)-1,2-diaminocyclohexane-tetraacetic acid (CDTA) chelate with hydroxy acids (where hydroxy acids = salicylic acid (SA); Sulphosalicylic acid (SSA) and 8-hydroxyquinoline-5-sulphonic acid (HQSA)) have been investigated by potentiometric titration. Their formation constants have been calculated (..mu..=0.1M-KNO/sub 3/; and t=30+-1 deg C) as 4.60 +-0.03, 5.46+-0.03, 5.87+-0.05; 3.12+-0.04, 3.95+-0.05, 4.42+-0.07; 2.73+-0.06, 3.45+-0.05 and 3.90+-0.08 for Ln(III)-CDTA-SA,-SSA, and -HQSA respectively (where Ln=La, Pr or Nd). The value of log Ksub(MAB) follows the order: La(III)).

  18. Changes in the social class gradient of cirrhosis mortality in England and Wales across the 20th century.

    Science.gov (United States)

    Crombie, Iain K; Precious, Elaine

    2011-01-01

    To explore the nature of the social class gradient of cirrhosis mortality in England and Wales across the 20th century. Data on male cirrhosis mortality by social class were obtained from the Registrar General's Decennial Supplements for the years 1921-1991. Data for 1941 were not collected because of the second World War. In 1921, cirrhosis mortality was substantially higher among the professional and managerial classes (I and II) than among the other social classes (III-V). This marked social class difference persisted until 1961 when the differences between the social classes were inconsistent. By 1991, the gradient had reversed and the lower social classes (IV and V) had the higher mortality. The excess mortality was greatest for social class V. The change in the mortality gradient is stark: in 1921social classes I and II had a cirrhosis mortality at least twice that of social classes IV and V, but by 1991 this ratio had reversed. The reversal in the social class gradient of cirrhosis mortality indicates a major change in risk factor distribution across social classes. Differential changes in alcohol consumption are a possible explanation for this change, although the 1991 social class gradient in cirrhosis is inconsistent with alcohol consumption data from national surveys. Further research is required to clarify the explanation for the observed gradient, so that appropriate preventive measures can be put into place.

  19. Accelerated SCC Testing of Stainless Steels According to Corrosion Resistance Classes

    Energy Technology Data Exchange (ETDEWEB)

    Borchert, M.; Mori, G. [General Analytical and Physical Chemistry, Montanuniversitaet Leoben (Austria); Bischof, M.; Tomandl, A. [Hilti Corporation, Liechtenstein (Austria)

    2015-12-15

    The German Guidelines for stainless steel in buildings (Z.30.3-6) issued by the German Institute for Building Technology (DIBt) categorize various stainless steel grades into five corrosion resistance classes (CRCs). Only 21 frequently used grades are approved and assigned to these CRCs. To assign new or less commonly used materials, a large program of outdoor exposure tests and laboratory tests is required. The present paper shows the results of stress corrosion cracking (SCC) tests that can distinguish between different CRCs. Slow strain rate tests (SSRT) were performed in various media and at different temperatures. CRC IV could be distinguished from CRC II and CRC III with a 31.3 % Cl{sup -} as MgCl{sub 2} solution at 140 .deg. C. CRC II and CRC III could be differentiated by testing in a 30% Cl{sup -} as MgCl{sub 2} solution at 100 .deg. C.

  20. Capacidade funcional máxima, fração de ejeção e classe funcional na cardiomiopatia chagásica: existe relação entre estes índices? Maximal functional capacity, ejection fraction, and functional class in Chagas cardiomyopathy: are these indices related?

    Directory of Open Access Journals (Sweden)

    Charles Mady

    2005-02-01

    Full Text Available OBJETIVO: Avaliar a potencial associação entre a capacidade funcional máxima (VO2max, fração de ejeção do ventrículo esquerdo (FEVE e a classe funcional (CF pela NYHA em pacientes com cardiomiopatia chagásica. MÉTODOS: Foram estudados 104 homens, com idade média de 40.3± 9.0 anos (variação: de 18 a 65, com diagnóstico estabelecido de cardiomiopatia chagásica. A FEVE e VO2max foram classificadas em três categorias: FEVE 0.50 e VO2max 20 ml.kg-1.min-1, respectivamente. RESULTADOS: Do total, 31 (29.8% pacientes estavam em CF II, 41 (39.4% em classe funcional III, e 32 (30.8% em CF IV. Os valores correspondentes do VO2max e da FEVE para CF II, III e IV foram 21.5±4.0 ml.kg-1.min-1, 18.3±5.8 ml.kg-1.min-1 e 14.7±4.9 ml.kg-1.min-1 e 0.50±0.6, 0.35±0.9 e 0.29±0.7, respectivamente. FEVE 0.50 como também VO2max >20 ml.kg-1.min-1. CONCLUSÃO: Existe uma boa associação entre a classe funcional, a capacidade funcional máxima e a fração de ejeção do ventrículo esquerdo em pacientes com cardiomiopatia chagásica. Dados que podem ser úteis no manuseio da insuficiência cardíaca, em chagásicos.OBJECTIVE: Left ventricular ejection fraction (LVEF and maximal functional capacity (VO2max have both been shown to be related to a poor long-term survival in Chagas' disease patients. The aim of this study was to estimate the potential association of VO2max, LVEF, and NYHA functional class in patients with Chagas' disease cardiomyopathy. METHODS: One hundred four male patients, aged 40.3±9.0 years (range, 18 to 65, with a definite diagnosis of Chagas disease cardiomyopathy were studied. LVEF and VO2max were both classified into 3 degrees: LVEF 0.50 and VO2max 20 ml.kg-1.min-1, respectively. RESULTS: Thirty-one patients (29.8% were in NYHA functional class II, 41 (39.4% in functional class III, and 32 (30.8% in functional class IV. The corresponding values of VO2max and LVEF for functional classes II, III, and IV were 21.5±4.0 ml.kg-1

  1. Yield and composition of pirarucu fillet in different weight classes - doi: 10.4025/actascianimsci.v33i1.10843 Yield and composition of pirarucu fillet in different weight classes - doi: 10.4025/actascianimsci.v33i1.10843

    Directory of Open Access Journals (Sweden)

    Samanta Eulles Quixaba Carvalho

    2011-02-01

    Full Text Available The fillet yield and quantity of waste generated after processing are important for planning and evaluating the growth performance of species and systems of aquaculture production in Brazil. The pirarucu (Arapaima gigas is among the species with desirable characteristics for intensive fish with high market value. The objective was to evaluate the performance of pirarucu fillet in different weight classes: 7.0 to 9.0 kg (group I, 11.0 to 13.0 kg (group II and 14.0 to 17.0 kg (group III. The fillet yield presented no significant difference between groups. The composition showed significant differences (p The fillet yield and quantity of waste generated after processing are important for planning and evaluating the growth performance of species and systems of aquaculture production in Brazil. The pirarucu (Arapaima gigas is among the species with desirable characteristics for intensive fish with high market value. The objective was to evaluate the performance of pirarucu fillet in different weight classes: 7.0 to 9.0 kg (group I, 11.0 to 13.0 kg (group II and 14.0 to 17.0 kg (group III. The fillet yield presented no significant difference between groups. The composition showed significant differences (p < 0.05 for moisture (77.96 to 75.04% and ash (2.21 to 2.46%, while values of lipid and protein were similar between classes evaluated. In assessing the fat percentage per serving (loin, belly and tail there was higher fat deposition in the ventral part and in group III. Thus, it can be lessen the pirarucu with weight ranging from 7.0 to 9.0 kg, using shorter production cycles and obtaining better quality fillets by having a lower muscle percentage of lipids.

  2. Enhancement of the fluorescence of the samarium (III) complex by gadolinium (III)

    International Nuclear Information System (INIS)

    Yun-Xiang, C.; Zhang-Hua, L.

    1988-01-01

    The increase in sensitivity and selectivity of reactions in which colored species are formed by the addition of different metal ions is an area of research that has recently been developed. This phenomenon, which is sometimes called cocolaration effect, has been explained by the formation of mixed metal complex. The authors found an analogous phenomenon of reactions forming fluorescent complexes. The complexes of Sm(III)-thenoyltrifluoroacetone (TTA)-phenanthroline (Phen)-Triton-X-100 (TX-100) and Gd(III) (or La(III), Lu(III) and Y(III))-TTA-Phen-TX-100 had practically no fluorescence separately. Instead, a fluorescence-enhancement phenomenon caused by adding Gd or La, Lu and Y ions to the system was observed for the first time. The intensity of the enhanced fluorescence of Sm(III) complex was increased in the following order: La< Y< Lu< Gd. By analogy with cocoloration effect, the authors call this new fluorescence-enhancement phenomenon the co-fluorescence effect. The object of this work was to study the enhancement effect of Gd(III) on the fluorescence of the Sm(III)-TTA-Phen-TX-100 system. The recommended fluorimetric method has been applied to the determination of trace amounts of samarium in ytterbium oxide with satisfactory results. A general reaction mechanism for the system studied was proposed

  3. Kinetic model building using advanced nuclear medicine techniques: the kinetics of chromium(III) in the human body

    International Nuclear Information System (INIS)

    Lim, T.H.

    1978-06-01

    The purpose of this study is to investigate whether a valid index of chromium (III) nutritional status can be determined with satisfaction through in vivo kinetic analysis. Three normal subjects and three patients suffering from hemochromatosis were periodically scanned with the Donner Laboratory computerized whole body scanners, starting seconds after radiochromium(III) was administered intravenously, up to a period of 84 days. The activity in the liver, adipose and muscle tissues, spleen and bone was quantitated and corrected, by subtraction of the blood circulation activity in that organ; the major concentration was found in the liver and spleen. From the series of scan images, a kinetic model for the radiochromium(III) metabolic pathway was constructed. Computer analysis showed a significant difference between the two classes of subjects in organs as well as whole body radiochromium(III) transfer. Interpretation of these results showed that in patients with excessive iron stores, a smaller amount of chromium bound to plasma protein was found and a corresponding decrease in transfer of chromium into stores in the liver and other tissues was also found

  4. Fracture toughness of A533B Part III - variability of A533B fracture toughness as determined from Charpy data

    International Nuclear Information System (INIS)

    Druce, S.G.; Eyre, B.L.

    1978-08-01

    This is the final part of a series of three reports examining the upper shelf fracture toughness of A533B Class 1 pressure vessel steel. Part I (AERE R 8968) critically reviews the current elasto plastic fracture mechanics methodologies employed to characterise toughness following extensive yielding and Part II (AERE R 8969) examines several sources of fracture mechanics data pertinent to A533B Class 1 in the longitudinal (RW) orientation. Part III is a review of the effects of (i) position and orientation within the plate (ii) welding processes and post weld heat treatment and (iii) neutron irradiation as measured by Charpy impact testing. It is concluded that the upper shelf factor energy is dependent on orientation and position and can be reduced by welding, extended post weld heat treatments and neutron irradiation. Neutron irradiation effects are known to be strongly dependent on composition and metallurgical conditions, but an explanation for the variability following extended post weld treatments has yet to be resolved. (author)

  5. Metallothionein (MT)-III

    DEFF Research Database (Denmark)

    Carrasco, J; Giralt, M; Molinero, A

    1999-01-01

    Metallothionein-III is a low molecular weight, heavy-metal binding protein expressed mainly in the central nervous system. First identified as a growth inhibitory factor (GIF) of rat cortical neurons in vitro, it has subsequently been shown to be a member of the metallothionein (MT) gene family...... injected rats. The specificity of the antibody was also demonstrated in immunocytochemical studies by the elimination of the immunostaining by preincubation of the antibody with brain (but not liver) extracts, and by the results obtained in MT-III null mice. The antibody was used to characterize...... the putative differences between the rat brain MT isoforms, namely MT-I+II and MT-III, in the freeze lesion model of brain damage, and for developing an ELISA for MT-III suitable for brain samples. In the normal rat brain, MT-III was mostly present primarily in astrocytes. However, lectin staining indicated...

  6. Class size versus class composition

    DEFF Research Database (Denmark)

    Jones, Sam

    Raising schooling quality in low-income countries is a pressing challenge. Substantial research has considered the impact of cutting class sizes on skills acquisition. Considerably less attention has been given to the extent to which peer effects, which refer to class composition, also may affect...... bias from omitted variables, the preferred IV results indicate considerable negative effects due to larger class sizes and larger numbers of overage-for-grade peers. The latter, driven by the highly prevalent practices of grade repetition and academic redshirting, should be considered an important...

  7. An integrative review of in-class activities that enable active learning in college science classroom settings

    Science.gov (United States)

    Arthurs, Leilani A.; Kreager, Bailey Zo

    2017-10-01

    Engaging students in active learning is linked to positive learning outcomes. This study aims to synthesise the peer-reviewed literature about 'active learning' in college science classroom settings. Using the methodology of an integrative literature review, 337 articles archived in the Educational Resources Information Center (ERIC) are examined. Four categories of in-class activities emerge: (i) individual non-polling activities, (ii) in-class polling activities, (iii) whole-class discussion or activities, and (iv) in-class group activities. Examining the collection of identified in-class activities through the lens of a theoretical framework informed by constructivism and social interdependence theory, we synthesise the reviewed literature to propose the active learning strategies (ALSs) model and the instructional decisions to enable active learning (IDEAL) theory. The ALS model characterises in-class activities in terms of the degrees to which they are designed to promote (i) peer interaction and (ii) social interdependence. The IDEAL theory includes the ALS model and provides a framework for conceptualising different levels of the general concept 'active learning' and how these levels connect to instructional decision-making about using in-class activities. The proposed ALS model and IDEAL theory can be utilised to inform instructional decision-making and future research about active learning in college science courses.

  8. Social Class Dialogues and the Fostering of Class Consciousness

    Science.gov (United States)

    Madden, Meredith

    2015-01-01

    How do critical pedagogies promote undergraduate students' awareness of social class, social class identity, and social class inequalities in education? How do undergraduate students experience class consciousness-raising in the intergroup dialogue classroom? This qualitative study explores undergraduate students' class consciousness-raising in an…

  9. Describing three-class task performance: three-class linear discriminant analysis and three-class ROC analysis

    Science.gov (United States)

    He, Xin; Frey, Eric C.

    2007-03-01

    Binary ROC analysis has solid decision-theoretic foundations and a close relationship to linear discriminant analysis (LDA). In particular, for the case of Gaussian equal covariance input data, the area under the ROC curve (AUC) value has a direct relationship to the Hotelling trace. Many attempts have been made to extend binary classification methods to multi-class. For example, Fukunaga extended binary LDA to obtain multi-class LDA, which uses the multi-class Hotelling trace as a figure-of-merit, and we have previously developed a three-class ROC analysis method. This work explores the relationship between conventional multi-class LDA and three-class ROC analysis. First, we developed a linear observer, the three-class Hotelling observer (3-HO). For Gaussian equal covariance data, the 3- HO provides equivalent performance to the three-class ideal observer and, under less strict conditions, maximizes the signal to noise ratio for classification of all pairs of the three classes simultaneously. The 3-HO templates are not the eigenvectors obtained from multi-class LDA. Second, we show that the three-class Hotelling trace, which is the figureof- merit in the conventional three-class extension of LDA, has significant limitations. Third, we demonstrate that, under certain conditions, there is a linear relationship between the eigenvectors obtained from multi-class LDA and 3-HO templates. We conclude that the 3-HO based on decision theory has advantages both in its decision theoretic background and in the usefulness of its figure-of-merit. Additionally, there exists the possibility of interpreting the two linear features extracted by the conventional extension of LDA from a decision theoretic point of view.

  10. Sorption behavior of europium(III) and curium(III) on the cell surfaces of microorganisms

    International Nuclear Information System (INIS)

    Ozaki, T.; Kimura, T.; Ohnuki, T.; Yoshida, Z.; Gillow, J.B.; Francis, A.J.

    2004-01-01

    We investigated the association of europium(III) and curium(III) with the microorganisms Chlorella vulgaris, Bacillus subtilis, Pseudomonas fluorescens, Halomonas sp., Halobacterium salinarum, and Halobacterium halobium. We determined the kinetics and distribution coefficients (K d ) for Eu(III) and Cm(III) sorption at pH 3-5 by batch experiments, and evaluated the number of water molecules in the inner-sphere (N H 2 O ) and the degree of strength of ligand field (R E/M ) for Eu(III) by time-resolved laser-induced fluorescence spectroscopy (TRLFS). Exudates from C. vulgaris, Halomonas sp., and H. halobium had an affinity for Eu(III) and Cm(III). The log K d of Eu(III) and Cm(III) showed that their sorption was not fully due to the exchange with three protons on the functional groups on cell surfaces. The halophilic microorganisms (Halomonas sp., Halobacterium salinarum, H. halobium) showed almost no pH dependence in log K d , indicating that an exchange with Na + on the functional groups was involved in their sorption. The ΔN H 2 O (= 9 - N H 2 O ) for Eu(III) on C. vulgaris was 1-3, while that for the other microorganisms was over 3, demonstrating that the coordination of Eu(III) with C. vulgaris was predominantly an outer-spherical process. The R E/M for Eu(III) on halophilic microorganisms was 2.5-5, while that for non-halophilic ones was 1-2.5. This finding suggests that the coordination environment of Eu(III) on the halophilic microorganisms is more complicated than that on the other three non-halophilic ones. (orig.)

  11. Sorption behavior of europium(III) and curium(III) on the cell surfaces of microorganisms

    Energy Technology Data Exchange (ETDEWEB)

    Ozaki, T.; Kimura, T.; Ohnuki, T.; Yoshida, Z. [Advanced Science Research Center, Japan Atomic Energy Research Inst., Ibaraki (Japan); Gillow, J.B.; Francis, A.J. [Environmental Sciences Dept., Brookhaven National Lab., Upton, NY (United States)

    2004-07-01

    We investigated the association of europium(III) and curium(III) with the microorganisms Chlorella vulgaris, Bacillus subtilis, Pseudomonas fluorescens, Halomonas sp., Halobacterium salinarum, and Halobacterium halobium. We determined the kinetics and distribution coefficients (K{sub d}) for Eu(III) and Cm(III) sorption at pH 3-5 by batch experiments, and evaluated the number of water molecules in the inner-sphere (N{sub H{sub 2}O}) and the degree of strength of ligand field (R{sub E/M}) for Eu(III) by time-resolved laser-induced fluorescence spectroscopy (TRLFS). Exudates from C. vulgaris, Halomonas sp., and H. halobium had an affinity for Eu(III) and Cm(III). The log K{sub d} of Eu(III) and Cm(III) showed that their sorption was not fully due to the exchange with three protons on the functional groups on cell surfaces. The halophilic microorganisms (Halomonas sp., Halobacterium salinarum, H. halobium) showed almost no pH dependence in log K{sub d}, indicating that an exchange with Na{sup +} on the functional groups was involved in their sorption. The {delta}N{sub H{sub 2}O} (= 9 - N{sub H{sub 2}O}) for Eu(III) on C. vulgaris was 1-3, while that for the other microorganisms was over 3, demonstrating that the coordination of Eu(III) with C. vulgaris was predominantly an outer-spherical process. The R{sub E/M} for Eu(III) on halophilic microorganisms was 2.5-5, while that for non-halophilic ones was 1-2.5. This finding suggests that the coordination environment of Eu(III) on the halophilic microorganisms is more complicated than that on the other three non-halophilic ones. (orig.)

  12. Social affiliation in same-class and cross-class interactions.

    Science.gov (United States)

    Côté, Stéphane; Kraus, Michael W; Carpenter, Nichelle C; Piff, Paul K; Beermann, Ursula; Keltner, Dacher

    2017-02-01

    Historically high levels of economic inequality likely have important consequences for relationships between people of the same and different social class backgrounds. Here, we test the prediction that social affiliation among same-class partners is stronger at the extremes of the class spectrum, given that these groups are highly distinctive and most separated from others by institutional and economic forces. An internal meta-analysis of 4 studies (N = 723) provided support for this hypothesis. Participant and partner social class were interactively, rather than additively, associated with social affiliation, indexed by affiliative behaviors and emotions during structured laboratory interactions and in daily life. Further, response surface analyses revealed that paired upper or lower class partners generally affiliated more than average-class pairs. Analyses with separate class indices suggested that these patterns are driven more by parental income and subjective social class than by parental education. The findings illuminate the dynamics of same- and cross-class interactions, revealing that not all same-class interactions feature the same degree of affiliation. They also reveal the importance of studying social class from an intergroup perspective. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  13. Hypoxia-inducible factor-2α (HIF-2α), but not HIF-1α, is essential for hypoxic induction of class III β-tubulin expression in human glioblastoma cells.

    Science.gov (United States)

    Bordji, Karim; Grandval, Alexandra; Cuhna-Alves, Leilane; Lechapt-Zalcman, Emmanuèle; Bernaudin, Myriam

    2014-12-01

    Glioblastoma multiforme (GBM) is the deadliest form of primary brain cancer. Several reports have indicated aberrant levels of βIII-tubulin (βIII-t) in human GBM. βIII-t overexpression was linked to increasing malignancy in glial tumors and described to determine the onset of resistance to chemotherapy. Furthermore, a linkage was suggested between the induction of βIII-t expression and hypoxia, a hallmark of GBM. We investigated the role of hypoxia-inducible factor (HIF)-1α and HIF-2α in the regulation of the βIII-t gene (TUBB3) in GBM cells cultured in either normoxia or hypoxia. We report for the first time that HIF-2α, but not HIF-1α, is involved in hypoxia-induced βIII-t expression in GBM cells. By gene-reporter experiments and site-directed mutagenesis, we found that two overlapping hypoxia response elements located in the 3' UTR of the gene were involved in the activation of TUBB3. This occurred through an enhanced binding of HIF-2α to the 3' region, as revealed by an electrophoretic mobility shift assay. Conversely, the promoter of TUBB3 was shown to be inactive. In addition, we observed that HIF-1α exhibits a repressive effect on βIII-t expression in cells cultured in normoxia. These results show that both HIF-α isoforms have opposing effects on βIII-t expression in GBM cells. Finally, we observed that hypoxia-induced βIII-t expression is well correlated with the kinetics of HIF-2α protein stabilization. The evidence for a direct linkage between HIF-2α and increased expression of βIII-t by hypoxia suggests that an anti-HIF-2α strategy (i.e. by downregulating βIII-t) could be of potential interest for improving the treatment of GBM. © 2014 FEBS.

  14. How the Change in IBS Criteria From Rome III to Rome IV Impacts on Clinical Characteristics and Key Pathophysiological Factors.

    Science.gov (United States)

    Aziz, Imran; Törnblom, Hans; Palsson, Olafur S; Whitehead, William E; Simrén, Magnus

    2018-06-08

    The diagnostic criteria for irritable bowel syndrome (IBS) have recently been updated from Rome III to Rome IV. Whereas in Rome III a diagnosis of IBS entailed chronic abdominal pain or discomfort at least 3 days per month, in Rome IV the term discomfort has been removed and the frequency of abdominal pain increased to at least 1 day per week. We examined how this change in IBS criteria impacts on clinical characteristics and pathophysiological factors. A total of 542 Swedish subjects with Rome III IBS completed a baseline questionnaire enquiring for the number of abdominal pain days in the last 10 days; this was subsequently used as a surrogate marker to identify Rome IV IBS, in that (a) those with 0 or 1 day of pain were classed as Rome IV-negative, and (b) those with ≥2 days of pain were classed as Rome IV-positive. Comparisons were made between Rome IV-positive and -negative IBS groups for demographics, IBS subtype, gastrointestinal and psychological symptoms, somatisation, fatigue, disease-specific quality of life, rectal sensitivity, and oro-anal transit time. Overall, 85% of Rome III IBS patients fulfilled the Rome IV criteria for IBS, but 15% did not. Rome IV-positive subjects were significantly more likely to be female, have poorer quality of life, greater pain severity, bloating, somatisation, fatigue, and rectal sensitivity than Rome IV-negative subjects. There were no differences in severity of anxiety or depression, IBS subtypes, bowel habit dissatisfaction, or oro-anal transit time. Finally, increasing number of pain days correlated positively with symptoms and visceral hypersensitivity. Most Rome III-positive IBS patients seeking healthcare fulfil the Rome IV IBS criteria. They constitute a more severe group than those who lose their IBS diagnosis.

  15. Structural myocardial changes in chronic heart failure of II functional class based on overweight and abdominal obesity

    Directory of Open Access Journals (Sweden)

    V. Z. Netyazhenko

    2014-04-01

    Full Text Available Abstract. 153 patients with CHF of II functional class, with normal weight, overweight and abdominal obesity I-III degrees Examined. Studied structural myocardial changes at CHF depending on the degree of excess weight. Structural changes of the heart, the extent and type of myocardial hypertrophy of left ventricle depending on the availability of overweight and obesity were revealed. Actuality. Chronic heart failure (CHF is characterized by a high mortality rate and frequency of hospitalization of patients, a significant decline in their quality of life and significant financial burden. CHF is a medical and social problem that a certain dominant in the near future all over the world, because the average life expectancy of patients with the diagnosis ranges from 1,7 to 7 years and the long-term observation is evidence of the increased risk of death, that 5 year more than four times the initial value. The main etiological factors of occurrence, progression and adverse exit of CHF are age, coronary heart disease (CHD, arterial hypertension, valvular heart disease, diabetes and obesity. In general, structural changes of heart in obesity can be divided into the following main components: left ventricle hypertrophy, changes in the structural composition of cardiac tissue, heart obesity, change of the sizes of the right ventricle and left atrium (PL, valvular heart disease. Research objective: to establish the structural changes of CHF of II functional class depending on the availability of overweight and abdominal type of obesity various degrees. Material and methods: 153 patients with CHF of II functional class were examined. Etiological factors of development CHF were hypertensive disease, chronic forms of CAD and the combination of these pathologies. The diagnosis of CHF installed according to WHO criteria, the European society of cardiology and the Association of cardiologists of Ukraine, and classified according to functional classification of

  16. Transuranium perrhenates: Np(IV), Pu(IV) and (III), Am (III)

    International Nuclear Information System (INIS)

    Silvestre, Jean-Paul; Freundlich, William; Pages, Monique

    1977-01-01

    Synthesis in aqueous solution and by solid state reactions, crystallographical characterization and study of the stability of some transuranium perrhenates: Asup(n+)(ReO 4 - )sub(n) (A=Np(IV), Pu(IV), Pu(III), Am(III) [fr

  17. Enhanced optical nonlinearities in the near-infrared using III-nitride heterostructures coupled to metamaterials

    International Nuclear Information System (INIS)

    Wolf, Omri; Ma, Xuedan; Brener, Igal; Allerman, Andrew A.; Wendt, Joel R.; Shaner, Eric A.; Song, Alex Y.

    2015-01-01

    We use planar metamaterial resonators to enhance by more than two orders of magnitude the near infrared second harmonic generation obtained from intersubband transitions in III-Nitride heterostructures. The improvement arises from two factors: employing an asymmetric double quantum well design and aligning the resonators' cross-polarized resonances with the intersubband transition energies. The resulting nonlinear metamaterial operates at wavelengths where single photon detection is available, and represents a different class of sources for quantum photonics related phenomena

  18. Functional and structural comparison of pyrrolnitrin- and iprodione-induced modifications in the class III histidine-kinase Bos1 of Botrytis cinerea.

    Directory of Open Access Journals (Sweden)

    Sabine Fillinger

    Full Text Available Dicarboximides and phenylpyrroles are commonly used fungicides against plant pathogenic ascomycetes. Although their effect on fungal osmosensing systems has been shown in many studies, their modes-of-action still remain unclear. Laboratory- or field-mutants of fungi resistant to either or both fungicide categories generally harbour point mutations in the sensor histidine kinase of the osmotic signal transduction cascade.In the present study we compared the mechanisms of resistance to the dicarboximide iprodione and to pyrrolnitrin, a structural analogue of phenylpyrrole fungicides, in Botrytis cinerea. Pyrrolnitrin-induced mutants and iprodione-induced mutants of B. cinerea were produced in vitro. For the pyrrolnitrin-induced mutants, a high level of resistance to pyrrolnitrin was associated with a high level of resistance to iprodione. For the iprodione-induced mutants, the high level of resistance to iprodione generated variable levels of resistance to pyrrolnitrin and phenylpyrroles. All selected mutants showed hypersensitivity to high osmolarity and regardless of their resistance levels to phenylpyrroles, they showed strongly reduced fitness parameters (sporulation, mycelial growth, aggressiveness on plants compared to the parental phenotypes. Most of the mutants presented modifications in the osmosensing class III histidine kinase affecting the HAMP domains. Site directed mutagenesis of the bos1 gene was applied to validate eight of the identified mutations. Structure modelling of the HAMP domains revealed that the replacements of hydrophobic residues within the HAMP domains generally affected their helical structure, probably abolishing signal transduction. Comparing mutant phenotypes to the HAMP structures, our study suggests that mutations perturbing helical structures of HAMP2-4 abolish signal-transduction leading to loss-of-function phenotype. The mutation of residues E529, M427, and T581, without consequences on HAMP structure

  19. Validation and predictive power of Radiation Therapy Oncology Group (RTOG) recursive partitioning analysis classes for malignant glioma patients: A report using RTOG 90-06

    International Nuclear Information System (INIS)

    Scott, Charles B.; Scarantino, Charles; Urtasun, Raul; Movsas, Benjamin; Jones, Christopher U.; Simpson, Joseph R.; Fischbach, A. Jennifer; Curran, Walter J.

    1998-01-01

    Purpose: The recursive partitioning analysis (RPA) classes for malignant glioma patients were previously established using data on over 1500 patients entered on Radiation Therapy Oncology Group (RTOG) clinical trials. The purpose of the current analysis was to validate the RPA classes with a new dataset (RTOG 90-06), determine the predictive power of the RPA classes, and establish the usefulness of the database norms for the RPA classes. Patients and Methods: There are six RPA classes for malignant glioma patients that comprise distinct groups of patients with significantly different survival outcome. RTOG 90-06 is a randomized Phase III study of 712 patients accrued from 1990 to 1994. The minimum potential follow-up is 18 months. The treatment arms were combined for the purpose of this analysis. There were 84, 13, 105, 240, 150, and 23 patients in the RPA Classes I-VI from RTOG 90-06, respectively. Results: The median survival times (MST) and 2-year survival rates for the six RPA classes in RTOG 90-06 are compared to those previously published. The MST and 2-year survival rates for the RTOG RPA classes were within 95% confidence intervals of the 90-06 estimates for Classes I, III, IV, and V. The RPA classes explained 43% of the variation (squared error loss). By comparison, a Cox model explains 30% of the variation. The RPA classes within RTOG 90-06 are statistically distinct with all comparisons exceeding 0.0001, except those involving Class II. A survival analysis from a prior RTOG study indicated that 72.0 Gy had superior outcome to literature controls; analysis of this data by RPA classes indicates the survival results were not superior to the RTOG database norms. Conclusion: The validity of the model is verified by the reliability of the RPA classes to define distinct groups with respect to survival. Further evidence is given by prediction of MST and 2-year survival for all classes except Class II. The RPA classes explained a good portion of the variation in

  20. Exploring social class: voices of inter-class couples.

    Science.gov (United States)

    McDowell, Teresa; Melendez-Rhodes, Tatiana; Althusius, Erin; Hergic, Sara; Sleeman, Gillian; Ton, Nicky Kieu My; Zimpfer-Bak, A J

    2013-01-01

    Social class is not often discussed or examined in-depth in couple and family therapy research and literature even though social class shapes familial relationships and is considered an important variable in marital satisfaction. In this qualitative study, we explored the perceptions of eight couples who made lasting commitments across class lines by asking them about the impact of their social class backgrounds on their relationships. Three categories of themes emerged including: (a) differences and similarities in values and attitudes toward education, work, money, and class awareness/classism, (b) relationship issues involving families of origin, friends, and class-based couple conflict, and (c) differences in economic resources, social capital and privileges/opportunities. Implications for assessment and treatment of couples are included. © 2012 American Association for Marriage and Family Therapy.