WorldWideScience

Sample records for clara mcfc product

  1. MCFC PRODUCT DESIGN IMPROVEMENT

    International Nuclear Information System (INIS)

    Unknown

    2000-01-01

    This contract is supported by DOE and DOD/DARPA funds. The objective of the DOE program is to advance the direct carbonate fuel cell technology to a level suitable for commercial entry. The specific objectives of the DOD's initiative on 2 MW Fuel Cell Fixed Base Power Plant are: (A) to provide a detailed engineering design, development and cost estimate of the 2 MW fuel cell fixed base dual fuel power plant for DOD applications. Installation and operational support systems will also be developed. (B) To construct a full-size MW-class dual fuel power plant simulator

  2. Fuzzy fault diagnosis system of MCFC

    Institute of Scientific and Technical Information of China (English)

    Wang Zhenlei; Qian Feng; Cao Guangyi

    2005-01-01

    A kind of fault diagnosis system of molten carbonate fuel cell (MCFC) stack is proposed in this paper. It is composed of a fuzzy neural network (FNN) and a fault diagnosis element. FNN is able to deal with the information of the expert knowledge and the experiment data efficiently. It also has the ability to approximate any smooth system. FNN is used to identify the fault diagnosis model of MCFC stack. The fuzzy fault decision element can diagnose the state of the MCFC generating system, normal or fault, and can decide the type of the fault based on the outputs of FNN model and the MCFC system. Some simulation experiment results are demonstrated in this paper.

  3. Progress of MCFC stack technology at Toshiba

    Energy Technology Data Exchange (ETDEWEB)

    Hori, M.; Hayashi, T.; Shimizu, Y. [Toshiba Corp., Tokyo (Japan)

    1996-12-31

    Toshiba is working on the development of MCFC stack technology; improvement of cell characteristics, and establishment of separator technology. For the cell technology, Toshiba has concentrated on both the restraints of NiO cathode dissolution and electrolyte loss from cells, which are the critical issues to extend cell life in MCFC, and great progress has been made. On the other hand, recognizing that the separator is one of key elements in accomplishing reliable and cost-competitive MCFC stacks, Toshiba has been accelerating the technology establishment and verification of an advanced type separator. A sub-scale stack with such a separator was provided for an electric generating test, and has been operated for more than 10,000 hours. This paper presents several topics obtained through the technical activities in the MCFC field at Toshiba.

  4. Status of MCFC stack technology at IHI

    Energy Technology Data Exchange (ETDEWEB)

    Hosaka, M.; Morita, T.; Matsuyama, T.; Otsubo, M. [Ishikawajima-Harima Heavy Industries Co., Ltd., Tokyo (Japan)

    1996-12-31

    The molten carbonate fuel cell (MCFC) is a promising option for highly efficient power generation possible to enlarge. IHI has been studying parallel flow MCFC stacks with internal manifolds that have a large electrode area of 1m{sup 2}. IHI will make two 250 kW stacks for MW plant, and has begun to make cell components for the plant. To improve the stability of stack, soft corrugated plate used in the separator has been developed, and a way of gathering current from stacks has been studied. The DC output potential of the plant being very high, the design of electric insulation will be very important. A 20 kW short stack test was conducted in 1995 FY to certificate some of the improvements and components of the MW plant. These activities are presented below.

  5. EVALUATION AND ACTIONS OF CLEANER PRODUCTION IN GALVANIC INDUSTRY OF THE VILLA CLARA PROVINCE

    Directory of Open Access Journals (Sweden)

    Petra G. Velazco Pedroso

    2015-10-01

    Full Text Available In this paper, the assessment results accomplished in different processes of the galvanic industry are presented and it is taking into account the application of good practices and measures of Cleaner Production. The main critical points in the processes of metallic coating were identified; and the characterization of the effluents generated by the installation is done. A number of technological changes in the processes are proposed, as well as the introduction of cleaner production measures which contribute to increase the efficiency and safety of processes, reduce risks and improvements to internal operations. It provides advantages of economic, environmental and social nature for the galvanic industry due to the minimizing of the impacts on environment, because the sewage and its pollutant load are reduced. Besides, we can save water, energy and raw materials. The economic evaluation showed the feasibility of applying the Cleaner Production (PML measures proposed with a Net Present Value (NPV of $109 696.26, and an Internal Rate of Return (IRR of 64 % value and payback period lower than two years.

  6. High temperature corrosion of separator materials for MCFC

    Energy Technology Data Exchange (ETDEWEB)

    Yanagida, Masahiro; Tanimoto, Kazumi; Kojima, Toshikatsu [Osaka National Research Institute (Japan)] [and others

    1996-12-31

    The Molten Carbonate Fuel Cell (MCFC) is one of promising high efficiency power generation devices with low emission. Molten carbonate used for its electrolyte plays an important role in MCFC. It separates between anode and cathode gas environment and provides ionic conductivity on MCFC operation. Stainless steel is conventionally used as separator/current collector materials in MCFC cathode environment. As corrosion of the components of MCFC caused by the electrolyte proceeds with the electrolyte consumption, the corrosion in the MCFC is related to its performance and life. To understand and inhibit the corrosion in the MCFC is important to realize MCFC power generation system. We have studied the effect of alkaline earth carbonate addition into carbonate on corrosion of type 316L stainless steel. In this paper, we describe the effect of the temperature on corrosion behavior of type 316L stainless steel with carbonate mixture, (Li{sub 0.62}K{sub 0.38}){sub 2}CO{sub 3}, under the cathode environment in out-of-cell test.

  7. Operation characteristics of a multiple type MCFC

    Energy Technology Data Exchange (ETDEWEB)

    Kuroe, S.; Kamo, T. [Hitachi Research Lab., Hitachi, Ltd., Ibaraki-ken (Japan); Fujimura, H.; Kahara, T. [Hitachi, Ltd., Ibaraki-ken (Japan)

    1996-12-31

    Multiple type structure of MCFC of which the separator of the cell is divided by four element cells has been studied. For the stable operation of this type cell, the effect of gas flow rate and temperature distribution on the cell voltage should be clear. In order to clarify these characteristics, a small sized mimic model has been made and tested. The flow rate distribution for the four element cells were varied and cell voltage and temperature distribution were measured for each cell. The decrease in cell voltage and the increase in maximum temperature became remarkable when the apparent utilization factor for one element cell became over 100%. The calculated results agreed fairly good with test results.

  8. Design, Construction and Operation of a Molten Carbonate Fuel Cell (MCFC) in the 100-kW-Class

    International Nuclear Information System (INIS)

    Heiming, Andreas; Huppmann, Gerhard; Aasberg-Petersen, Kim

    1999-01-01

    In fuel cells, the electrochemical energy of the fuel is converted directly into electricity and heat. The electrochemical conversion is inherently related to high electrical efficiencies and very low pollutant emissions. Fuel cells with sufficiently high operating temperatures such as (1) the phosphoric acid fuel cell (PAFC), operating temperature: 200 o C, (2) the molten carbonate fuel cell (MCFC), operating temperature: 650 o C and (3) the solid oxide fuel cell (SOFC), operating temperature: around 900 o C are best suited for decentralised combined heat and power (CHP) applications. This is due to the fact, that the heat of the exothermic reaction taking place in the fuel cell can be used in the domestic, commercial and industrial sector for heating and hot water or steam production. At the present time, gas-engines or gas-turbines are the preferred CHP-technologies for these applications. Nowadays, the PAFC is commercially available. More than 160 plants, each with a power of 200 kW, have been installed world-wide. Ruhrgas has investigated the behaviour of a 200 kW PAFC at its research centre in Dorsten, Germany, and at the site of a local utility. High temperature fuel cells such as MCFC or SOFC promise electrical efficiencies above 50 % in simple cycle mode. Up to now, MCFC-test plants have been built and operated in the 100 kW to 1 MW power range. The largest MCFC ever operated consisted of 16 identical stacks of 125 kW each, resulting in a plant power of 2 MW. The initial experience with SOFC in this power-range is currently gained from the operation of a 100 kW plant. In this paper, the result of the construction and operation of a highly innovatively designed 280 kW MCFC will be presented. This plant has been designed, built and operated by a European consortium for the development and market introduction of the MCFC. Members of the consortium are MTU-Friedrichshafen GmbH, Haldor Topsoee NS, Elkraft A.m.b.H., RWE Energie AG and Ruhrgas AG. (author)

  9. MOLCARE development towards MCFC commercial power plants based on 500 kW standard modules

    Energy Technology Data Exchange (ETDEWEB)

    Torazza, A; Dufour, A; Perfumo, A; Ricerche, A; Gegundez, J; Sanson, F; Moreno, A

    1998-07-01

    Fuel cells technologies for stationary applications are expected to play a remarkable role in the field of next decade energy production systems ranging from some hundreds kW to some MW. The interest in using fuel cells to produce electric energy comes from the advantages that fuel cells offer in terms of high efficiency, good behavior at base and partial load, very low emissions, modularity (easy adjustment of plant capacity to power-demand increase), and reduced time to be spent for plant erection. At least four types of fuel cells can be considered suitable for stationary applications. With reference to their electrolyte they can be classified as: Polymeric Electrolyte Membrane Fuel Cells (PEMFC), Phosphoric Acid Fuel Cells (PAFC), Molten Carbonate Fuel Cells (MCFC) and Solid Oxide Fuel Cells (SOFC). Each of them works at a temperature level that is depending on the type of electrolyte. From a general point of view all the fuel cell technologies present, at various extents, the above listed advantages. Nevertheless specific features of each fuel cell type suggest to identify a specific field of application for each type of solution, in order to stress the potential advantages of any technology and minimize its possible drawbacks. Anyway the different level of maturity for the various fuel cell technologies does not allow an homogeneous comparison of technical and economical key parameters. PAFCs, due to their present commercial availability and operation experience, are well outlined in terms of performance and costs; on the contrary with regard to the other technologies--PEMFC, MCFC and SOFC--which are still under development, their commercialization is expected within a period of 7 to 13 years according to single technology maturity level (MCFC level seems to be more ready), kind of application, competitors, environmental constraints, etc.

  10. Operation result of 40kW class MCFC pilot plant

    Energy Technology Data Exchange (ETDEWEB)

    Saitoh, H.; Hatori, S.; Hosaka, M.; Uematsu, H. [Ishikawajima-Harima Heavy Industries Co., Ltd., Tokyo (Japan)

    1996-12-31

    Ishikawajima-Harima Heavy Industries Co., Ltd. developed unique Molten Carbonate Fuel Cell (MCFC) system based on our original concept. To demonstrate the possibility of this system, based on MCFC technology of consigned research from New Energy and Industrial Technology Development Organization (NEDO) in Japan, we designed 40kW class MCFC pilot plant which had all equipments required as a power plant and constructed in our TO-2 Technical Center. This paper presents the test results of the plant.

  11. Simulated coal gas MCFC power plant system verification. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-07-30

    The objective of the main project is to identify the current developmental status of MCFC systems and address those technical issues that need to be resolved to move the technology from its current status to the demonstration stage in the shortest possible time. The specific objectives are separated into five major tasks as follows: Stack research; Power plant development; Test facilities development; Manufacturing facilities development; and Commercialization. This Final Report discusses the M-C power Corporation effort which is part of a general program for the development of commercial MCFC systems. This final report covers the entire subject of the Unocal 250-cell stack. Certain project activities have been funded by organizations other than DOE and are included in this report to provide a comprehensive overview of the work accomplished.

  12. R&D of MCFC matrix for long term operation

    Energy Technology Data Exchange (ETDEWEB)

    Nishimura, Takashi; Fujita, Yoji; Urushibata, Hiroaki; Sasaki, Akira [Mitsubishi Electric Corp., Hyogo (Japan)

    1996-12-31

    Long term operation is an essential subject in the commercialization of the Molten Carbonate Fuel Cell (MCFC). Material stability is important for the development of the MCFC. particularly for long term operation. In this paper, the specification and the stabilization of MCFC matrix arc investigated, with the aim of producing 40000 hours of operation. It is common knowledge that matrix thickness has a large influence on shorting time, as shorting is caused by the dissolution of the nickel oxide cathodes. Therefore, the optimum thickness of a matrix designed for 40000 hours operation without the nickel shorting was sought. The influences of different electrolytes and matrix specifications on the shorting time were measured with accelerated cell tests. The internal resistance of the matrix was also estimated. Gamma( {gamma} )-lithium aluminate (LiAlO{sub 2}) powder with a sub-micron particle diameter is commonly used for a raw material of matrix to retain molten carbonate electrolytes. This is because most researchers found that {gamma}-LiA1O{sub 2} was the most stable material in the MCFC environment among the three allotropic forms alpha ( {alpha} ), beta ( {beta} ), and {gamma}. However. two problems with the stability of {gamma} -LiAlO{sub 2} are being vigorously discussed. especially in Japan: particle growth causes decreasing electrolyte retention, and the transformation of {gamma} to {alpha}. This transformation contradicts the accepted opinion that {gamma} is the most stable form. In this paper, the particle growth and the phase transformation of LiAlO{sub 2} are examined with post-test analyses. The influence of matrix degradation on cell performance is also considered.

  13. Cycle analysis of MCFC/gas turbine system

    Directory of Open Access Journals (Sweden)

    Musa Abdullatif

    2017-01-01

    Full Text Available High temperature fuel cells such as the solid oxide fuel cell (SOFC and the molten carbonate fuel cell (MCFC are considered extremely suitable for electrical power plant application. The molten carbonate fuel cell (MCFC performances is evaluated using validated model for the internally reformed (IR fuel cell. This model is integrated in Aspen Plus™. Therefore, several MCFC/Gas Turbine systems are introduced and investigated. One of this a new cycle is called a heat recovery (HR cycle. In the HR cycle, a regenerator is used to preheat water by outlet air compressor. So the waste heat of the outlet air compressor and the exhaust gases of turbine are recovered and used to produce steam. This steam is injected in the gas turbine, resulting in a high specific power and a high thermal efficiency. The cycles are simulated in order to evaluate and compare their performances. Moreover, the effects of an important parameters such as the ambient air temperature on the cycle performance are evaluated. The simulation results show that the HR cycle has high efficiency.

  14. Cycle analysis of MCFC/gas turbine system

    Science.gov (United States)

    Musa, Abdullatif; Alaktiwi, Abdulsalam; Talbi, Mosbah

    2017-11-01

    High temperature fuel cells such as the solid oxide fuel cell (SOFC) and the molten carbonate fuel cell (MCFC) are considered extremely suitable for electrical power plant application. The molten carbonate fuel cell (MCFC) performances is evaluated using validated model for the internally reformed (IR) fuel cell. This model is integrated in Aspen Plus™. Therefore, several MCFC/Gas Turbine systems are introduced and investigated. One of this a new cycle is called a heat recovery (HR) cycle. In the HR cycle, a regenerator is used to preheat water by outlet air compressor. So the waste heat of the outlet air compressor and the exhaust gases of turbine are recovered and used to produce steam. This steam is injected in the gas turbine, resulting in a high specific power and a high thermal efficiency. The cycles are simulated in order to evaluate and compare their performances. Moreover, the effects of an important parameters such as the ambient air temperature on the cycle performance are evaluated. The simulation results show that the HR cycle has high efficiency.

  15. Biosynthesis and release of proteins by isolated pulmonary Clara cells

    International Nuclear Information System (INIS)

    Patton, S.E.; Gilmore, L.B.; Jetten, A.M.; Nettesheim, P.; Hook, G.E.

    1986-01-01

    The major proteins synthesized and released by Clara cells were identified and compared with those synthesized and released by mixed lung cells. Highly purified Clara cells (85.9 +/- 2.4%) and mixed lung cells (Clara cells 4%, Type II cells 33%, granulocytes 18%, macrophages 2.7%, ciliated cells 1.2%) were isolated from rabbit lungs, incubated with Ham's F12 medium in collagen/fibronectin-coated plastic culture dishes in the presence of 35 S-methionine for periods of 4 and 18 hrs. Radiolabelled proteins were isolated from the cells and from the culture medium, electrophoresed on polyacrylamide gels in the presence of SDS under reducing conditions, and then autoradiographed. After 4 and 18 hr of incubation of the Clara cells the major radiolabelled cell-associated proteins were those with molecular weights of 6, 48, and 180 Kd. The major radiolabelled proteins released by Clara cells into the medium after 4 hrs of incubation had molecular weights of 6, 48, and 180 Kd, accounting for 42, 16, and 10%, respectively, of the total extracellular protein-associated radioactivity. After 18 hr of incubation the 6 and 48 Kd proteins represented 30 and 18% of the total released radioactivity, and the relative amount of the 180 Kd protein had decreased to 3%. With the mixed lung cells, the major proteins released into the medium had molecular weights of 6 and 48 Kd. Under nonreducing conditions the 6 Kd protein released by Clara cells had an apparent molecular weight of 12 Kd. Labelling isolated Clara cells with a mixture of 14 C-amino acids also identified this low molecular weight protein as the major secretory product of the Clara cell. The 6 Kd protein did not label when the cells were incubated with 14 C-glucosamine indicating that it was not a glycoprotein. Data demonstrate the release of several proteins from isolated Clara cells but the major protein had a M.W. of 6 Kd

  16. Development of 1000kW-class MCFC pilot plant

    Energy Technology Data Exchange (ETDEWEB)

    Ooue, M.; Yasue, H. [MCFC Research Association, Mie (Japan); Takasu, K.; Tsuchitori, T.

    1996-12-31

    This pilot plant is a part of the New Sunshine Program which has proceeded by the Agency of Industrial Science and Technology of the Ministry of International Trade and Industry. MCFC Research Association is entrusted with the development of the pilot plant, and constructing it at Kawagoe site. Following items will be verified by this pilot plant operation. (a) Development of 250kW class stack and confirmation of stack performance and decay rate. (b) System verification such as basic process, control system and operation characteristics, toward commercialization. (c) To get design data for demonstration plant.

  17. Demonstration of direct internal reforming for MCFC power plants

    Energy Technology Data Exchange (ETDEWEB)

    Aasberg-Petersen, K.; Christensen, P.S.; Winther, S.K. [HALDOR TOPSOE A/S, Lynby (Denmark)] [and others

    1996-12-31

    The conversion of methane into hydrogen for an MCFC by steam reforming is accomplished either externally or internally in the stack. In the case of external reforming the plant electrical efficiency is 5% abs. lower mainly because more parasitic power is required for air compression for stack cooling. Furthermore, heat produced in the stack must be transferred to the external reformer to drive the endothermic steam reforming reaction giving a more complex plant lay-out. A more suitable and cost effective approach is to use internal steam reforming of methane. Internal reforming may be accomplished either by Indirect Internal Reforming (DIR) and Direct Internal Reforming (DIR) in series or by DIR-only as illustrated. To avoid carbon formation in the anode compartment higher hydrocarbons in the feedstock are converted into hydrogen, methane and carbon oxides by reaction with steam in ail adiabatic prereformer upstream the fuel cell stack. This paper discusses key elements of the desire of both types of internal reforming and presents data from pilot plants with a combined total of more than 10,000 operating hours. The project is being carried out as part of the activities of the European MCFC Consortium ARGE.

  18. CLARA: CLAS12 Reconstruction and Analysis Framework

    Energy Technology Data Exchange (ETDEWEB)

    Gyurjyan, Vardan [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Matta, Sebastian Mancilla [Santa Maria U., Valparaiso, Chile; Oyarzun, Ricardo [Santa Maria U., Valparaiso, Chile

    2016-11-01

    In this paper we present SOA based CLAS12 event Reconstruction and Analyses (CLARA) framework. CLARA design focus is on two main traits: real-time data stream processing, and service-oriented architecture (SOA) in a flow based programming (FBP) paradigm. Data driven and data centric architecture of CLARA presents an environment for developing agile, elastic, multilingual data processing applications. The CLARA framework presents solutions capable of processing large volumes of data interactively and substantially faster than batch systems.

  19. Cobalt and cerium coated Ni powder as a new candidate cathode material for MCFC

    International Nuclear Information System (INIS)

    Kim, Min Hyuk; Hong, Ming Zi; Kim, Young-Suk; Park, Eunjoo; Lee, Hyunsuk; Ha, Hyung-Wook; Kim, Keon

    2006-01-01

    The dissolution of nickel oxide cathode in the electrolyte is one of the major technical obstacles to the commercialization of molten carbonate fuel cell (MCFC). To improve the MCFC cathode stability, the alternative cathode material for MCFC was prepared, which was made of Co/Ce-coated on the surface of Ni powder using a polymeric precursor based on the Pechini method. X-ray diffraction (XRD) and scanning electron microscopy (SEM) with energy dispersive X-ray analysis (EDAX) were employed in characterization of the alternative cathode materials. The Co/Ce-coated Ni cathode prepared by the tape-casting technique. The solubility of the Co/Ce-coated Ni cathode was about 80% lower when compare to that of pure Ni cathode under CO 2 :O 2 (66.7:33.3%) atmosphere at 650 deg. C. Consequently, the fine Co/Ce-coated Ni powder could be confirmed as a new alternative cathode material for MCFC

  20. MCFC power plant with CO{sub 2} separation

    Energy Technology Data Exchange (ETDEWEB)

    Kinoshita, Noboru [Ishikawajima-Harima Heavy Industries Co., Ltd., Tokyo (Japan)

    1996-12-31

    Fuel cell power plant has been developed for many years with expectation of high system efficiency. In the meantime the gas turbine combined cycle has shown its considerable progress in improving system efficiency. Fuel cell power plant will no longer be attractive unless it exceeds the gas turbine combined cycle at least in the system efficiency. It is said CO{sub 2} separation could improve the efficiency of fuel cell power plant. IHI has developed the CO{sub 2} separator for fuel cell power plant. This study describes that the CO{sub 2} separator can increase the efficiency of the molten carbonate fuel cell (MCFC) power plant by 5% and the expected efficiency reaches 63 % in HHV basis.

  1. Status of the M-C Power IMHEX{reg_sign} MCFC commercialization program

    Energy Technology Data Exchange (ETDEWEB)

    Laurens, R.M.; Scroppo, J.A.; Petri, R.J.; Benjamin, T.G. [M-C Power Corp., Burr Ridge, IL (United States)

    1996-12-31

    Six years ago, M-C Power (MCP) developed a comprehensive business plan to commercialize molten carbonate fuel cell (MCFC) power plants. On an annual basis the plan has been reviewed and modified to adapt to identified end user needs and technological advancements. As a result, product definition kept abreast with marketing requirements. Over the last five years, there was order and reason for subtle shifts in supply, demand, competition and pricing policies. Today, however, traditional market assessment assumptions must be challenged. There is a revolution taking place. The revolution can be summed up in one word ... deregulation. Deregulation of the airline industry led to consideration of the natural gas industry. Now that natural gas deregulation is behind us, it is electric power and telecommunications that are receiving attention. Increased emphasis is being placed on achieving market-priced power. The net result will be thinner margins for the seller and the end user. What does this mean for the commercialization of molten carbonate fuel cells?

  2. The effects of system configuration and operating condition on the MCFC system efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Kang, B.S. [Korea Electric Power Research Institute, Taejeon (Korea)

    2001-07-01

    The process simulation model of an externally reformed molten carbonate fuel cell (MCFC) system is used to analyze quantitatively the parametric effect on the system efficiency. In order to verify the MCFC process simulation model, the 25-kW system was analyzed on the basis of the experimental data and its calculated efficiency showed reasonable. The overall system efficiency of high-temperature fuel cell system, especially MCFC, can not be increased without the proper thermal integration between heat recovery units and additional power generation from auxiliary power generating units such as turbines. The simulation results show that the configuration of unit operators in a given system has great effect on the system efficiency while the system size and operating condition have slightly lower effect on it. Based on the system configuration, optimal operating condition including fuel, oxidant utilization, and recycle ratio can be specified to maximize the system efficiency. (author). 12 refs., 10 figs., 2 tabs.

  3. Performance Analysis of a MCFC/MGT Hybrid Power System Bi-Fueled by City Gas and Biogas

    Directory of Open Access Journals (Sweden)

    Hongyu Huang

    2015-06-01

    Full Text Available This study evaluates the performance of a molten carbonate fuel cell and micro gas turbine (MCFC/MGT hybrid power system bi-fueled by city gas and biogas. The performance of the MCFC/MGT hybrid power system and MFCF/MGT hybrid power system response have been investigated experimentally and numerically. Results show that the MCFC, steam reformer, and catalytic combustor models are in agreement with the experimental results of the system fueled by city gas only and the system bi-fueled by city gas and biogas. The MFCF/MGT hybrid power system can have manifest operation with the addition of biogas at a flow rate of up to 150.0 Nm3·h−1, which is about 50% of the overall input heat value. In addition, the MCFC and MGT outputs decrease with the increase in the flow rate of added biogas, with an overall power generation efficiency ranging from 39.0% to 42.0%. Furthermore, the MCFC/MGT hybrid power system can be operated stably both at low amplitude with slow current change and large amplitude with rapid power conditions. Finally, the MCFC/MGT hybrid system bi-fueled by city gas and biogas may be applicable to the energy supply of the micro–grid network.

  4. CLARA: an integrated clinical research administration system

    Science.gov (United States)

    Bian, Jiang; Xie, Mengjun; Hogan, William; Hutchins, Laura; Topaloglu, Umit; Lane, Cheryl; Holland, Jennifer; Wells, Thomas

    2014-01-01

    Administration of human subject research is complex, involving not only the institutional review board but also many other regulatory and compliance entities within a research enterprise. Its efficiency has a direct and substantial impact on the conduct and management of clinical research. In this paper, we report on the Clinical Research Administration (CLARA) platform developed at the University of Arkansas for Medical Sciences. CLARA is a comprehensive web-based system that can streamline research administrative tasks such as submissions, reviews, and approval processes for both investigators and different review committees on a single integrated platform. CLARA not only helps investigators to meet regulatory requirements but also provides tools for managing other clinical research activities including budgeting, contracting, and participant schedule planning. PMID:24778201

  5. Experimental comparison of MCFC performance using three different biogas types and methane

    Science.gov (United States)

    Bove, Roberto; Lunghi, Piero

    Biogas recovery is an environmentally friendly and cost-effective practice that is getting consensus in both the scientific and industrial community, as the growing number of projects demonstrate. The use of fuel cells as energy conversion systems increases the conversion efficiency, as well as the environmental benefits. Molten carbonate fuel cells (MCFC) operate at a temperature of about 650 °C, thus presenting a high fuel flexibility, compared to low temperature fuel cells. Aim of the present study is to compare the performance of an MCFC single cell, fuelled with different biogas types as well as methane. The biogases considered are derived from the following processes: (1) steam gasification in an entrained flow gasifier; (2) steam gasification in a duel interconnect fluidized bed gasifier; (3) biogas from an anaerobic digestion process. The performances are evaluated for different fuel utilization and current densities. The results are an essential starting point for a complete system design and demonstration.

  6. A Special Family Series. Mario and Clara Hernandez. Clara Finds a Friend = Lina Familia Especial. Mario y Clara Hernandez. Clara Eucuentra una Amiga.

    Science.gov (United States)

    Cazares, Maria

    These two comic books are part of the "Very Special Family" series, created by and for Hispanic parents of children with special needs. The materials are designed to help parents deal with the emotional difficulties of raising a child with disabilities. The booklets are printed in both English and Spanish. In Part 1, "Mario and Clara Hernandez," a…

  7. Relative abundance estimations of Chengal trees in a tropical rainforest by using modified canopy fractional cover (mCFC)

    International Nuclear Information System (INIS)

    Hassan, N

    2014-01-01

    Tree species composition estimations are important to sustain forest management. This study estimates relative abundance of useful timber tree species (chengal) using Hyperion EO-1 satellite data. For the estimation, modified Canopy Fractional Cover (mCFC) was developed using Canopy Fractional Cover (CFC). mCFC was more sensitive to estimate relative abundance of chengal trees rather than Mixture Tuned Matched Filtering (MTMF). Meanwhile, MTMF was more sensitive to estimate the relative abundance of undisturbed forest. Accuracy suggests that the mCFC model is better to explain relative abundance of chengal trees than MTMF. Therefore, it can be concluded that relative abundance of tree species extracted from Hyperion EO-1 satellite data using modified Canopy Fractional Cover is an obtrusive approach used for identifying tree species composition

  8. Relative abundance estimations of chengal tree in a tropical rainforest by using modified Canopy Fractional Cover (mCFC)

    International Nuclear Information System (INIS)

    Hassan, N

    2014-01-01

    Tree species composition estimations are important to sustain forest management. This study challenged estimates of relative abundance of useful timber tree species (chengal) using Hyperion EO-1 satellite data. For the estimation, modified Canopy Fractional Cover (mCFC) was developed using Canopy Fractional Cover (CFC). mCFC was more sensitive to estimate relative abundance of chengal trees rather than Mixture Tuned Matched Filtering (MTMF). Meanwhile, MTMF was more sensitive to estimate the relative abundance of undisturbed forest. Accuracy suggests that the mCFC model is better to explain relative abundance of chengal trees than MTMF. Therefore, it can be concluded that relative abundance of trees species extracted from Hyperion EO-1 satellite data using modified Canopy Fractional Cover is an obtrusive approach used for identifying trees species composition

  9. Improvement of biogas as a fuel in molten carbonate fuel cells (MCFC); Aprovechamiento del biogas como combustible en pilas de combustible de carbonatos fundidos (MCFC)

    Energy Technology Data Exchange (ETDEWEB)

    Gil Diez, J.

    2002-07-01

    Molten carbonate fuel cells (MCFC) have a high efficiency of approx 50% when using biogas as a fuel and are among all types of FC the best suited for biogas. A precondition for use biogas in fuel cells is the reduction of accompanying traces of detrimental gases, therefore the RTD-work is two fold: A Preprocessing unit must be developed and the expected endurance must be confirmed. As a lesson learned in prior projects major reasons why renewable energy projects fail is the one-sided focus on technical aspects, that is why non-technical barriers shall be taken into account and realistic recommendations have to be established to overcome possible economic, logistic, legal and social problems. (Author)

  10. Guidelines for design and development of industrially relevant MCFC stacks

    Energy Technology Data Exchange (ETDEWEB)

    Torazza, A.; Dufour, A. [Ansaldo Ricerche S.r.l., Genova (Italy); Giorgi, L. [ENEA, Via Anguillarese, Roma (Italy)] [and others

    1996-12-31

    An interesting way of reducing the production costs of the electrical energy by improving efficiency and, at the same time, having a good integration between environment and power plants is offered by the utilization of the fuel cells operating at high temperatures. From this point of view, Molten Carbonate Fuel Cells (MCFCs) seem to be one of the most promising technologies because of their environmental friendly operation for various fuels and potential low cost. In fact it is well known that the MCFCs overall plant efficiency is typically some 500% and can reach, as a consequence of their high operating temperature, 65% with a bottoming cycle. Moreover MCFCs will be particularly attractive for dispersed power plants of MW size located at user sites. Additional advantages of MCFCs are their good response to base and partial load, short time for plant erection and modularity.

  11. Numerical simulation for cyclic steam injection at Santa Clara field

    International Nuclear Information System (INIS)

    Rodriguez, Edwin; Barrios, Wilson; Sandoval, Roy; Santos, Nicolas; Cortes, Ingrid

    2008-01-01

    This article presents the methodology used and the results obtained in the construction, match and prediction of the first thermal composition simulation model done in Colombia by employing advanced thermal process commercial software, globally recognized because of its effectiveness in modeling these types of processes (CMG-STARS, 2005). The Santa Clara and Palermo fields were modeled and an excellent history match was achieved. All in all 28 wells and 17 years of production were matched. Two production scenes were proposed. The first involved primary production from existing wells, in other words: primary production; and a second scene where all the wells in the field are converted into injectors and producers, to simulate cyclic steam injection. This injection process included a series of sensitivity studies for several of the parameters involved in this technology, such as: pressure and temperature injection, time and rate of injection, heat injected, soaking period, steam quality, and injection cycles. This sensitivity study was focused on optimizing the processes to obtain the maximum end recovery possible. The information entered into the simulator was validated by laboratory tests developed at the Instituto Colombiano del Petroleo (ICP). Among the tests performed the following were assessed: rock compressibility, relative permeability curve behavior at different temperatures, formation sensitivity to injection fluids, DRX analysis and residual saturation of crude oil for steam injection. The aforementioned results are documented in this paper

  12. A preliminary design and BOP cost analysis of M-C Power`s MCFC commerical unit

    Energy Technology Data Exchange (ETDEWEB)

    Chen, T.P. [Bechtel Corp, San Francisco, CA (United States)

    1996-12-31

    M-C Power Corporation plans to introduce its molten carbonate fuel cell (MCFC) market entry unit in the year 2000 for distributed and on-site power generation. Extensive efforts have been made to analyze the cell stack manufacturing costs. The major objective of this study is to conduct a detailed analysis of BOP costs based on an initial design of the market entry unit.

  13. Operating experience with a 250 kW el molten carbonate fuel cell (MCFC) power plant

    Science.gov (United States)

    Bischoff, Manfred; Huppmann, Gerhard

    The MTU MCFC program is carried out by a European consortium comprising the German companies MTU Friedrichshafen GmbH, Ruhrgas AG and RWE Energie AG as well as the Danish company Energi E2 S/A. MTU acts as consortium leader. The company shares a license and technology exchange agreement with Fuel Cell Energy Inc., Danbury, CT, USA (formerly Energy Research Corp., ERC). The program was started in 1990 and covers a period of about 10 years. The highlights of this program to date are: Considerable improvements regarding component stability have been demonstrated on laboratory scale. Manufacturing technology has been developed to a point which enables the consortium to fabricate the porous components on a 250 cm 2 scale. Several large area stacks with 5000-7660 cm 2 cell area and a power range of 3-10 kW have been tested at the facilities in Munich (Germany) and Kyndby (Denmark). These stacks have been supplied by FCE. As far as the system design is concerned it was soon realized that conventional systems do not hold the promise for competitive power plants. A system analysis led to the conclusion that a new innovative design approach is required. As a result the "Hot Module" system was developed by the consortium. A Hot Module combines all the components of a MCFC system operating at the similar temperatures and pressures into a common thermally insulated vessel. In August 1997 the consortium started its first full size Hot Module MCFC test plant at the facilities of Ruhrgas AG in Dorsten, Germany. The stack was assembled in Munich using 292 cell packages purchased from FCE. The plant is based on the consortium's unique and proprietary "Hot Module" concept. It operates on pipeline natural gas and was grid connected on 16 August 1997. After a total of 1500 h of operation, the plant was intentionally shut down in a controlled manner in April 1998 for post-test analysis. The Hot Module system concept has demonstrated its functionality. The safety concept has been

  14. Development of MCFC and PEFC technologies; Jisedai nenryo denchi no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Hori, M; Ozu, H; Sonai, A [Toshiba Corp. Tokyo (Japan)

    1996-06-01

    Next-generation fuel cells under development by Toshiba Corporation are outlined. The molten carbonate fuel cell (MCFC) has become stable in performance, which results from the conversion of the matrix group from the {gamma}-type to {alpha}-type LiAlO2. The cathode material is expected to withstand the elution of electrolyte for 20000 hours. The soft structure separator developed for stack constitution is expected to improve electrical contact and reduce the cost of stack. An appliance has been completed to tentatively produce every element concerned. During an actual operation, the structural soundness of the 2-cell stack was confirmed by thermal load tests. As for the polymer electrolyte fuel cell (PEFC), an interior humidification method has been developed using a porous material for supplying water to the polymer film. The amount of moisture can be controlled, which will enable a larger-area cell. A 1kW-class stack with a world-record-level 1200cm{sup 2} electrode area has been developed, which stack has shown that the target output has been attained. Furthermore, the power generation efficiency of the system including fuel treatment has been examined. 10 figs.

  15. Agroproductive educational programs, such as agritourism model for rural development in the canton Santa Clara, Pastaza-Ecuador

    Directory of Open Access Journals (Sweden)

    Karina Carrera Sánchez

    2014-10-01

    Full Text Available The opportunity to connect agriculture with tourism is a new approach as diversify the rural economy, with the vision, this research offers some conceptualizations of agrotourism and the main results of the present situation that allows learning programs potentiate of Centro de Investigación, Posgrado y Conservación de la Biodiversidad Amazónica CIPCA as possible model tourism and agrotourism activity prospects for the development of Santa Clara canton, province of Pastaza, located at km 44 Puyo-Tena. These results are obtained by surveying the producers of Santa Clara and interviews with program productive teaching coordinators and practitioners of center. Methodology we used chi-square test for verification of hypothesis. Eventually show the conclusions that contribute to farm planning for integrated endogenous rural development in Santa Clara.

  16. En el Cincuentenario del Hospital Santa Clara

    Directory of Open Access Journals (Sweden)

    Gilberto Rueda Pérez

    1992-12-01

    Full Text Available

    El 16 de julio de 1942 nace el Hospital Sanatorio Antituberculoso Santa Clara en Santafé de Bogotá.
    Un siglo atrás, casi a la fecha, en 1843, nace en Alemania Roberto Koch, quien, 60 años antes de la fundación del Hospital, el 24 de marzo de 1882, presenta al mundo el descubrimiento del Micobacterium Tuberculosis, germen causante de la enfermedad que ataca alhombre desde sus más remotos orígenes y que aún nos acompaña, especialmente en los países subdesarrollados, causando severo impacto en la salud de las poblaciones más necesitadas, apesar de los grandes avances alcanzados en el campo de la Medicina a nivel mundial.
    Por haber sido destinado el Hospital altratamiento de los tuberculosos, destino que aún conserva primordialmente aunque, como se verá posteriormente, sus camas reciben enfermos de medicina general dada la evolución de los tratamientos y la modernización de los esquemas terapéuticos, se justifica ampliamente mencionar aquí los principales avances relacionados con el control de la Tuberculosis a través de los tiempos hasta la fundación del Hospital.

    Estos se pueden resumir así:

    • 'HIPOCRATES (460-377 a. C.:describe la consunción y la llama tisis; lanza el concepto de herencia que perdura por siglos.
    • ARISTOTELES(324-284a. C.:habla del contagio a través de la respiración.
    • CELSO (siglo I a. C.: describe el tubérculo y señala tres formas de consunción: atrofia, caquexia y tisis.
    • GALENO(181-261 d. C.: la agrupa con otras enfermedades transmisibles: la peste, la sarna, etc.
    • EDADMEDIA(sigloVII alXIIId. C.:se destaca únicamente como aporte nuevo Maimonides, filósofo judío radicado en Granada (11351204,quien describe la tisis de los animales.

    Posteriormente Girolamo Fracastoro (1478-1553, nacido en Verona,la asimila a la viruela y lanza la teoría microbiana.

    • PARACELSO(1493-1541pregona que: los

    • Operation test for 200-kW class internally improved MCFC stacks having achieved 5000 hours; 200kW kyu naibu kaishitsu gata MCFC sutakku unten shiken 5,000 jikan tassei

      Energy Technology Data Exchange (ETDEWEB)

      Hashino, K. [Kansai Electric Power Co. Inc., Osaka (Japan)

      2000-03-10

      The operation test for 200-kW class internally improved MCFC stacks being performed at the Amagasaki fuel cell power generation testing plant of Kansai Electric Power Co., Inc. has achieved on January 22, 2000 five thousand hours, the original test time target. Temperature raising has begun on June 18 last year, and the first power generation was carried out on June 30. Since then the operation has continued smoothly at near rated output, and the test was completed nearly as planned without experiencing any trouble caused by Y2K problem. This research is being carried out as the research work shared by the Molten Carbonate Fuel Cell Power Generation System Technology Research Association (MCFC Research Association) based on the research commissioning from NEDO as part of the New Sunshine Project. After the confirmation of the initial performance, verification of the carbon dioxide self-sustaining operation, and the property evaluation test of every 500 hours are going smoothly. The intention hereafter is to achieve 5,000 hours as the power generation time, with the schedule to reduce the stack temperature in the middle of February, and cease the operation. As of January 25, the amount of power generated reached 1,089 MWh. (NEDO)

    • Escaping Slavery: "Sweet Clara and the Freedom Quilt."

      Science.gov (United States)

      Miller, Sue Ann

      This lesson uses the picture book "Sweet Clara and the Freedom Quilt" by Deborah Hopkinson and an interactive website to enhance third- through fifth-grade students' understanding of the Underground Railroad and slavery, development of reading comprehension skills, and application of mapping skills. During three 45-60 minute lessons,…

    • Clara Schumann: 'A woman's love and life': a psychoanalytic interpretation.

      Science.gov (United States)

      Halberstadt-Freud, H C

      1995-01-01

      This study was undertaken to demonstrate how psychoanalysis can shed new light on a much studied life history. Clara's emotional life knew a sequence of losses and "prohibited" intimate relationships that created grave loyalty, identity, and identificatory conflicts for her. Since her early childhood, when her father forced her to give up her mother, she had been forced into a choice between the love objects most dear to her and the one on whom she depended for her emotional survival. This resulted in her later repetition compulsion to maneuver herself into the same conflict of loyalty and in her hesitation to decide when choosing one object meant losing the other. Clara had never known a normal separation, only loss and abandonment. She strove to combine the incompatible and succeeded in remaining loyal not only to her mother and father, but also to Robert Schumann, and eventually to Johannes Brahms. Clara Schumann's ideals were conflicted not only because she was educated by two men who were fighting each other, but also because her father, as well as Robert, had internally inconsistent and ambiguous ideas about women. Clara not only had to be obedient and creative, but self-sufficient at the same time. She was partially able to satisfy her own and her partner's needs and solve her deficiencies by projective identification, choosing taciturn men, more maternal than she.

    • Granivorous birds and sorghum crop in the province of Villa Clara,Cuba

      Directory of Open Access Journals (Sweden)

      Orlando Miguel Saucedo Castillo

      2017-07-01

      Full Text Available In order to reduce the damages granivorous birds cause to sorghum (Sorghum bicolor L. Moench in the province of Villa Clara, Cuba, research based on the determination of the major endemic, migratory birds and their relationship with the distribution were made space of historical meteorological variables in the province in the seasonal behavior of birds in different climatic regions. Population to sorghum producers grouped in different forms surveys were conducted, which yielded a large database, such as the determination of the main grain-eating birds percentage damage incurred, varieties, grain color, growth stage and other indicators. Nine main species affecting sorghum grain-eating birds in our province were recorded; Passer domesticus, Lonchura malacca, Lonchura punctulata, Dives atroviolaceus, Passerina cyanea, Zonotrichia leucophrys, Columbina passerine, Zenaida macroura y Zenaida asiatica. The spatial distribution of meteorological variables and their relation to the seasonal behavior of birds in different climatic regions of the province was determined, based on record four preferential habitat areas. The results allowed us to provide companies and different forms of production in Villa Clara, the possibility of a varietal structure planting of sorghum on the basis of different preferential areas granivorous birds, together with the morphological and physiological characteristics of different genotypes introduced in agricultural production of the province and nationally.

  1. TREATMENT SYSTEM FOR WASTEWATER AT VILLA CLARA WATER MANAGEMENT COMPANY

    Directory of Open Access Journals (Sweden)

    Floramis Pérez Martín

    2016-04-01

    Full Text Available The aim of this paper is to assess the current operating and safety conditions of biological treatment systems for wastewater in the centers of swinish and poultry breeding at Villa Clara Water Management Company, with the purpose of setting a group of organizational, technical and human measures that contributes to prevent contamination and minimize biological risks. In this way it can be guaranteed the protection to the workers, the facilities, community and the environment, to have a sure occupational atmosphere in the organization. As a result of the evaluation the factors that affect the operation of the biodigestion system and the security of the process are defined.

  2. Documentation of the Santa Clara Valley regional ground-water/surface-water flow model, Santa Clara Valley, California

    Science.gov (United States)

    Hanson, R.T.; Li, Zhen; Faunt, C.C.

    2004-01-01

    The Santa Clara Valley is a long, narrow trough extending about 35 miles southeast from the southern end of San Francisco Bay where the regional alluvial-aquifer system has been a major source of water. Intensive agricultural and urban development throughout the 20th century and related ground-water development resulted in ground-water-level declines of more than 200 feet and land subsidence of as much as 12.7 feet between the early 1900s and the mid-1960s. Since the 1960s, Santa Clara Valley Water District has imported surface water to meet growing demands and reduce dependence on ground-water supplies. This importation of water has resulted in a sustained recovery of the ground-water flow system. To help support effective management of the ground-water resources, a regional ground-water/surface-water flow model was developed. This model simulates the flow of ground water and surface water, changes in ground-water storage, and related effects such as land subsidence. A numerical ground-water/surface-water flow model of the Santa Clara Valley subbasin of the Santa Clara Valley was developed as part of a cooperative investigation with the Santa Clara Valley Water District. The model better defines the geohydrologic framework of the regional flow system and better delineates the supply and demand components that affect the inflows to and outflows from the regional ground-water flow system. Development of the model includes revisions to the previous ground-water flow model that upgraded the temporal and spatial discretization, added source-specific inflows and outflows, simulated additional flow features such as land subsidence and multi-aquifer wellbore flow, and extended the period of simulation through September 1999. The transient-state model was calibrated to historical surface-water and ground-water data for the period 197099 and to historical subsidence for the period 198399. The regional ground-water flow system consists of multiple aquifers that are grouped

  3. Letalidad por accidentes de trabajo en Villa Clara

    Directory of Open Access Journals (Sweden)

    Miguel Gómez Vital

    1999-01-01

    Full Text Available Se valora la problemática de la letalidad por accidentes laborales en la provincia de Villa Clara, en el período comprendido entre 1987 y 1997. Se determinan las principales causas, y fue la conducta negligente del individuo la que más incidió. En los últimos años de la década del 80 se registraron más cantidad de muertes por accidentes de trabajo, los que ocurrieron fundamentalmente en el puesto laboral. Queda puntualizado el importante rol del equipo médico en instituciones laborales.The problem of letality from working accidents in the province of Villa Clara from 1987 to 1997 was evaluated. The main causes were also determined. Individual negligent behaviour proved to be the first cause. More deaths from working accidents were registered late in the 1980s. Most of these accidents occurred at the working place. It was stressed the important role played by the medical team at the working institutions

  4. CLARA: A Contemporary Approach to Physics Data Processing

    Energy Technology Data Exchange (ETDEWEB)

    V Gyurjyan, D Abbott, J Carbonneau, G Gilfoyle, D Heddle, G Heyes, S Paul, C Timmer, D Weygand, E Wolin

    2011-12-01

    In traditional physics data processing (PDP) systems, data location is static and is accessed by analysis applications. In comparison, CLARA (CLAS12 Reconstruction and Analysis framework) is an environment where data processing algorithms filter continuously flowing data. In CLARA's domain of loosely coupled services, data is not stored, but rather flows from one service to another, mutating constantly along the way. Agents, performing event processing, can then subscribe to particular data/events at any stage of the data transformation, and make intricate decisions (e.g. particle ID) by correlating events from multiple, parallel data streams and/or services. This paper presents a PDP application development framework based on service oriented and event driven architectures. This system allows users to design (Java, C++, and Python languages are supported) and deploy data processing services, as well as dynamically compose PDP applications using available services. The PDP service bus provides a layer on top of a distributed pub-sub middleware implementation, which allows complex service composition and integration without writing code. Examples of service creation and deployment, along with the CLAS12 track reconstruction application design will be presented.

  5. The changing landscape of Clara Bog: the history of an Irish raised bog

    NARCIS (Netherlands)

    Crushell, P.H.; Connolly, A.; Schouten, M.G.C.; Mitchell, F.J.G.

    2008-01-01

    Clara Bog is one of the few raised bogs that has not been fully exploited in the Irish midlands and is a reminder of how the landscape of this region once appeared. This paper describes how the Clara Bog landscape has been changing since the commencement of the Holocene 11,500 years ago. Initially

  6. Water resources development in Santa Clara Valley, California: insights into the human-hydrologic relationship

    Energy Technology Data Exchange (ETDEWEB)

    Reynolds, Jesse L. [Univ. of California, Berkeley, CA (United States)

    2000-06-01

    Groundwater irrigation is critical to food production and, in turn, to humankind's relationship with its environment. The development of groundwater in Santa Clara Valley, California during the early twentieth century is instructive because (1) responses to unsustainable resource use were largely successful; (2) the proposals for the physical management of the water, although not entirely novel, incorporated new approaches which reveal an evolving relationship between humans and the hydrologic cycle; and (3) the valley serves as a natural laboratory where natural (groundwater basin, surface watershed) and human (county, water district) boundaries generally coincide. Here, I investigate how water resources development and management in Santa Clara Valley was influenced by, and reflective of, a broad understanding of water as a natural resource, including scientific and technological innovations, new management approaches, and changing perceptions of the hydrologic cycle. Market demands and technological advances engendered reliance on groundwater. This, coupled with a series of dry years and laissez faire government policies, led to overdraft. Faith in centralized management and objective engineering offered a solution to concerns over resource depletion, and a group dominated by orchardists soon organized, fought for a water conservation district, and funded an investigation to halt the decline of well levels. Engineer Fred Tibbetts authored an elaborate water salvage and recharge plan that optimized the local water resources by integrating multiple components of the hydrologic cycle. Informed by government investigations, groundwater development in Southern California, and local water law cases, it recognized the limited surface storage possibilities, the spatial and temporal variability, the relatively closed local hydrology, the interconnection of surface and subsurface waters, and the value of the groundwater basin for its storage, transportation, and

  7. Startup, testing, and operation of the Santa Clara 2MW direct carbonate fuel cell demonstration plant

    Energy Technology Data Exchange (ETDEWEB)

    Skok, A.J.; Leo, A.J. [Fuel Cell Engineering Corp., Danbury, CT (United States); O`Shea, T.P. [Santa Clara Demonstration Project, CA (United States)

    1996-12-31

    The Santa Clara Demonstration Project (SCDP) is a collaboration between several utility organizations, Fuel Cell Engineering Corporation (FCE), and the U.S. Dept. Of Energy aimed at the demonstration of Energy Research Corporation`s (ERC) direct carbonate fuel cell (DFC) technology. ERC has been pursuing the development of the DFC for commercialization near the end of this decade, and this project is an integral part of the ERC commercialization effort. The objective of the Santa Clara Demonstration Project is to provide the first full, commercial scale demonstration of this technology. The approach ERC has taken in the commercialization of the DFC is described in detail elsewhere. An aggressive core technology development program is in place which is focused by ongoing interaction with customers and vendors to optimize the design of the commercial power plant. ERC has selected a 2.85 MW power plant unit for initial market entry. Two ERC subsidiaries are supporting the commercialization effort: the Fuel Cell Manufacturing Corporation (FCMC) and the Fuel Cell Engineering Corporation (FCE). FCMC manufactures carbonate stacks and multi-stack modules, currently from its production facility in Torrington, CT. FCE is responsible for power plant design, integration of all subsystems, sales/marketing, and client services. FCE is serving as the prime contractor for the design, construction, and testing of the SCDP Plant. FCMC has manufactured the multi-stack submodules used in the DC power section of the plant. Fluor Daniel Inc. (FDI) served as the architect-engineer subcontractor for the design and construction of the plant and provided support to the design of the multi-stack submodules. FDI is also assisting the ERC companies in commercial power plant design.

  8. INCIDENCIA DE CARDIOPATÍAS DURANTE EL EMBARAZO EN LA PROVINCIA DE VILLA CLARA / Incidence of heart disease during pregnancy in Villa Clara province

    Directory of Open Access Journals (Sweden)

    Marilín C. Luna Alonso

    2012-07-01

    Full Text Available ResumenIntroducción y objetivos: Las enfermedades cardiovasculares constituyen la cuarta causa de muerte durante el período gravídico-puerperal, y un indicador de morbilidad y mortalidad para el producto de la concepción. El objetivo de esta investigación fue determinar el comportamiento de la cardiopatía en la embarazada, su atención médica y evolución durante y al final del embarazo. Método: Se realizó un estudio descriptivo, prospectivo, donde se analizaron 283 gestantes con diagnóstico de cardiopatía, atendidas en el Hospital Universitario Gineco-Obstétrico "Mariana Grajales" de Santa Clara, Villa Clara, en el período 2008-2010. La información se obtuvo mediante la revisión de las historias clínicas individuales, interrogatorio, examen físico completo, así como pruebas complementarias para establecer o confirmar el diagnóstico. Resultados: Se obtuvo una incidencia de 17,2 cardiopatías por cada mil gestantes y en el 59,7 % de ellas, la cardiopatía era adquirida; el prolapso valvular mitral fue la más frecuente (45 %. De las congénitas, el 36,8 % se trataba de una comunicación interauricular. Se utilizó antibioprofilaxis en el 96,8 % de las embarazadas y en el 96,1 % de ellas se mantuvo un seguimiento médico. El 92,6 % tenía clase funcional I y 4,6 % presentó complicación por su enfermedad. El 77,4 % parió entre las 37 y 42 semanas, y el 82,7 % tuvo parto eutócico. Conclusiones: Las gestantes cardiópatas fueron más frecuentes en edades entre 20 y 29 años, con predominio de las que no habían parido, captación entre las 13 y 24 semanas, y cardiopatías adquiridas. La atención médica que prevaleció fue la antibioprofilaxis y el seguimiento médico con evolución final del embarazo satisfactoria. / AbstractIntroduction and Objectives: Cardiovascular diseases are the fourth leading cause of death during the gravid-puerperal period, and an indicator of morbidity and mortality for the product of conception

  9. SUGAR AGROINDUSTRY IMPACT IN LOCAL DEVELOPMENT OF ENCRUCIJADA MUNICIPALITY IN VILLA CLARA PROVINCE

    Directory of Open Access Journals (Sweden)

    Ramón Sánchez Sánchez

    2017-07-01

    Full Text Available The purpose of this investigation is to show the impact in the economic, energy, ecological and sociocultural order that has experienced the sugar agroindustry in the local and territorial development of Encrucijada municipality, in Villa Clara province. The main methods and techniques used have been the surveys, the documentary analysis, the work with experts, agrarian commission’s reports of the municipal assembly, the matrix of weaknesses, strengths, threats, opportunities and the scenarios technique for the approach of strategic actions. In this work, a diagnosis study of the municipality is carried out, determining the main strengths, weaknesses, threats and opportunities with the corresponding strategies and actions for their improvement. Among the main results of the work is the contribution of 41 866,76 Cuban pesos in a sugar harvest for the contribution of sugar production, final honey, urea honey, cane bagasse for animal food, ice and the electric power generation as a contribution to the national net. Finally, the general procedure used is shown to directives and workers of the sector for the implementation and generalization of the work and its necessary level of consciousness of the value and importance of those productions for the improvement of conditions and quality of life of the citizens of this municipality. For the evaluation of this work the technique of consent index is used among experts.

  10. The Ecological Footprint of the Agrarian Sector in Villa Clara. A qualitative approximation

    Directory of Open Access Journals (Sweden)

    Mario Reinoso Pérez

    2015-01-01

    Full Text Available This research deals with the environmental impacts and aspects and their relationship to the ecological footprint of the agrarian sector in Villa Clara. In order to achieve this goal, 23 enterprises were used as study cases, which were clustered according to the main land use: (i succession planting (17 and (ii livestock and animal production (6. The information collected was used to develop the environmental aspects and impacts matrixes associated to the productive processes in each enterprise. The environmental aspects with higher relative frequencies (> 0.60 were water and energy consumption, the existence of invasive plants, the soil use, the greenhouse gas emissions, the use of forest resources, the generation of solid wastes and the use of agro-chemicals. Such aspects are causing negative impacts on the environment, and consequently they are increasing the ecological print of the sector in this province. The use of heavy machineries, the generation of liquid and dangerous residues, the continuous grazing and the use of alien species had a significant impact with a relative frequency below 0.55. However, these environmental aspects should be under control. It is concluded that, in all of the studied cases, the environmental aspects had a negative incidence on the environment. And they contribute in many ways to increase the ecological footprint of the agrarian sector in the territory. The implementation of the Environmental Management System, according to the international standards, is recommended.

  11. Subsurface and petroleum geology of the southwestern Santa Clara Valley ("Silicon Valley"), California

    Science.gov (United States)

    Stanley, Richard G.; Jachens, Robert C.; Lillis, Paul G.; McLaughlin, Robert J.; Kvenvolden, Keith A.; Hostettler, Frances D.; McDougall, Kristin A.; Magoon, Leslie B.

    2002-01-01

    and 1929 to total depths as great as 840 m. At least one pump unit is still standing. Although no lithologic or paleontologic samples are available from the wells, driller's logs indicate the presence of thick intervals of brown shale and sandstone resembling nearby outcrops of the Miocene Monterey Formation. Small amounts of oil and gas were observed in several wells, but commercial production was never established. Oil from the Peck well in Los Gatos is highly biodegraded, contains biomarkers commonly found in oils derived from the Monterey Formation, and has a stable-C-isotopic (d13C) composition of –23.32 permil, indicating derivation from a Miocene Monterey Formation source rock. Preliminary calculations suggest that about 1 billion barrels of oil may have been generated from source rocks within the Monterey Formation in the deepest part of the subsurface sedimentary basin between Los Gatos and Cupertino. Most of this oil was probably lost to biodegradation, oxidation, and leakage to the surface, but some oil may have accumulated in as-yet-undiscovered structural and stratigraphic traps along the complex structural boundary between the Santa Clara Valley and the Santa Cruz Mountains. Although some of these undiscovered accumulations of oil may be of commercial size, future petroleum exploration is unlikely because most of the area is currently devoted to residential, recreational, commercial, and industrial uses.

  12. Thermodynamic analysis of application of organic Rankine cycle for heat recovery from an integrated DIR-MCFC with pre-reformer

    International Nuclear Information System (INIS)

    Vatani, Ali; Khazaeli, Ali; Roshandel, Ramin; Panjeshahi, Mohammad Hassan

    2013-01-01

    Highlights: ► Using an integrated pre-reformer before feeding a DIR-MCFC is proposed. ► An ORC with different working fluid is used for waste heat recovery from the proposed plant. ► Performance of compound system is evaluated by thermodynamic analysis. ► An improvement on simultaneously heat integration between the units and waste heat recovery is performed. ► Overall energy and exergy efficiencies are found to be 60.45% and 57.75%. - Abstract: This work deals with waste heat recovery from a proposed direct internal reforming molten carbonate fuel cell (DIR-MCFC), including an integrated pre-reformer. In this regard, some advantages are attainable over exhaust gas recycling. For instance, due to low temperature in the pre-reformer, carbon deposition and coke formation resulting from higher hydrocarbons can be eliminated. In this study, the cathode outlet provides the heat requirement for the pre-reforming process. After partial heat recovery from the cathode outlet, the stream still has a considerable energy and exergy (352.55 °C and 83.687 kW respectively). This study investigates waste heat recovery from the proposed DIR-MCFC, using an organic Rankine cycle (ORC) with two different configurations. In the first case, the cathode outlet provides the heat requirement for the pre-reforming process; then, it enters the heat recovery vapor generator of the organic Rankine cycle. In the second case, the cathode outlet is split into two streams for using in an ORC and supplying the pre-reforming process required heat. Several substances are selected as working fluids in order to compare their performance in the waste heat recovery system. The overall results at optimum conditions indicate that the energy and exergy efficiencies of the compound system are increased and its exergy loss is decreased with cathode splitting for all substances (1.1% average over all fluids). It is concluded that cathode splitting has a significant impact on the substances which

  13. Synergistic effects in mice of trichloroethylene and copper overload on pulmonary clara cells injury

    International Nuclear Information System (INIS)

    Giovanetti, A.; Winik, B.; Schlick, C.

    1992-01-01

    Trichloroethylene (TCE), an organic solvent of worldwide use, is also emitted by autovehicles as a by-product of fuel combustion. Previous works have demonstrated that TCE, given by inhalation or by i.p. injection, induces a selective, dose-dependent damage to pulmonary non-ciliated Clara cells. TCE needs to be bioactivated in order to exert its toxic effect. Compounds altering the enzymes activity can therefore modulate TCE cytotoxicity. Copper (Cu) is an essential element and its concentration in serum is under homeostatic control; it is a cofactor for enzymes such as cytochrome oxidase. Humans are exposed to Cu by drinking water. In order to investigate whether a Cu overload enhances enzymes-mediated damage, Albin Swiss male mice were fed with a Cu-supplemented diet; afterwards, they were treated with TCE. Epithelial damage was quantified by counting the percentage of non ciliated vacuolated cells. Ultrastructural studies showed that vacuolations consisted in swelling of SER cisternae. It was postulated that, at physiological levels, Cu protects against lipid peroxidation, while at higher dosages, it promotes free radical formation

  14. Clara Haber, nee Immerwahr (1870-1915): Life, Work and Legacy.

    Science.gov (United States)

    Friedrich, Bretislav; Hoffmann, Dieter

    2016-03-01

    We examine the life, work, and legacy of Clara Haber, nee Immerwahr, who became the first woman to earn a doctorate from the University of Breslau, in 1900. In 1901 she married the chemist Fritz Haber. With no employment available for female scientists, Clara freelanced as an instructor in the continued education of women, mainly housewives, while struggling not to become a housewife herself. Her duties as a designated head of a posh household hardly brought fulfillment to her life. The outbreak of WWI further exacerbated the situation, as Fritz Haber applied himself in extraordinary ways to aid the German war effort. The night that he celebrated the "success" of the first chlorine cloud attack, Clara committed suicide. We found little evidence to support claims that Clara was an outspoken pacifist who took her life because of her disapproval of Fritz Haber's involvement in chemical warfare. We conclude by examining "the myth of Clara Immerwahr" that took root in the 1990s from the perspective offered by the available scholarly sources, including some untapped ones.

  15. First TSI observations of the new Compact Lightweight Absolute Radiometer (CLARA)

    Science.gov (United States)

    Walter, B.; Finsterle, W.; Koller, S.; Levesque, P. L.; Pfiffner, D.; Schmutz, W. K.

    2017-12-01

    Continuous and precise Total Solar Irradiance (TSI) measurements are indispensable to evaluate the influence of short- and long-term solar radiative emission variations on the Earth's energy budget. The existence of a potentially long-term trend in the suns activity and whether or not such a trend could be climate effective is still a matter of debate. The Compact Lightweight Absolute Radiometer (CLARA) is one of PMOD/WRC's future contributions to the almost seamless series of space borne TSI measurements since 1978. CLARA is one of three payloads of the Norwegian micro satellite NORSAT-1, along with Langmuir probes for space plasma research and an Automatic Identification System (AIS) receiver to monitor maritime traffic in Norwegian waters. NORSAT-1 was launched July 14th 2017 and the nominal operation of CLARA will start after the instrument commissioning beginning August 21st2017. We present the design, calibration and first TSI observations of CLARA, a new generation of active cavity Electrical Substitution Radiometers (ESR) comprising the latest radiometer developments of PMOD/WRC: i) A three-cavity design for degradation tracking and redundancy, ii) a digital control loop with feed forward system allowing for measurement cadences of 30s, iii) an aperture arrangement to reduce internal scattered light and iv) a new cavity and heatsink design to minimize non-equivalence, size and weight of the instrument. CLARA was end-to-end calibrated against the SI traceable cryogenic radiometer of the TSI Radiometer Facility (TRF) in Boulder (Colorado). The absolute measurement uncertainties for the three SI-traceable TSI detectors of CLARA are 567, 576 and 912 ppm (k = 1).

  16. Immunohistochemical analysis of Clara cell secretory protein expression in a transgenic model of mouse lung carcinogenesis

    International Nuclear Information System (INIS)

    Hicks, Sarah M.; Vassallo, Jeffrey D.; Dieter, Matthew Z.; Lewis, Cindy L.; Whiteley, Laurence O.; Fix, Andrew S.; Lehman-McKeeman, Lois D.

    2003-01-01

    Immunohistochemical methods have been widely used to determine the histogenesis of spontaneous and chemically-induced mouse lung tumors. Typically, antigens for either alveolar Type II cells or bronchiolar epithelial Clara cells are studied. In the present work, the morphological and immunohistochemical phenotype of a transgenic mouse designed to develop lung tumors arising from Clara cells was evaluated. In this model, Clara cell-specific transformation is accomplished by directed expression of the SV40 large T antigen (TAg) under the mouse Clara cell secretory protein (CC10) promoter. In heterozygous mice, early lesions at 1 month of age consisted of hyperplastic bronchiolar epithelial cells. These progressed to adenoma by 2 months as proliferating epithelium extended into adjacent alveolar spaces. By 4 months, a large portion of the lung parenchyma was composed of tumor masses. Expression of constitutive CC10 was diminished in transgenic animals at all time points. Only the occasional cell or segment of the bronchiolar epithelium stained positively for CC10 by immunohistochemistry, and all tumors were found to be uniformly negative for staining. These results were corroborated by Western blotting, where CC10 was readily detectable in whole lung homogenate from nontransgenic animals, but not detected in lung from transgenic animals at any time point. Tumors were also examined for expression of surfactant apoprotein C (SPC), an alveolar Type II cell-specific marker, and found to be uniformly negative for staining. These results indicate that, in this transgenic model, expression of CC10, which is widely used to determine whether lung tumors arise from Clara cells, was reduced and subsequently lost during Clara cell tumor progression

  17. Absence of p53 in Clara cells favours multinucleation and loss of cell cycle arrest

    Directory of Open Access Journals (Sweden)

    Clarke Alan R

    2002-11-01

    Full Text Available Abstract Background The p53 oncosuppressor protein is a critical mediator of the response to injury in mammalian cells and is mutationally inactivated in the majority of lung malignancies. In this analysis, the effects of p53-deficiency were investigated in short-term primary cultures of murine bronchiolar Clara cells. Clara cells, isolated from gene-targeted p53-deficient mice, were compared to cells derived from wild type littermates. Results p53 null cultures displayed abnormal morphology; specifically, a high incidence of multinucleation, which increased with time in culture. Multinucleated cells were proficient in S phase DNA synthesis, as determined by BrdU incorporation. However, multinucleation did not reflect altered rates of S phase synthesis, which were similar between wild type and p53-/- cultures. Nucleation defects in p53-/- Clara cells associated with increased centrosome number, as determined by confocal microscopy of pericentrin-stained cultures, and may highlight a novel role of p53 in preserving genomic integrity in lung epithelial cells. Effects of p53-deficiency were also studied following exposure to DNA damage. A p53-dependent reduction in the BrdU index was observed in Clara cells following ionizing radiation. The reduction in BrdU index in wild type cells displayed serum-dependency, and occurred only in the absence of serum. Taken together, these findings demonstrate that in murine primary Clara cell culture, cell cycle arrest is a p53-mediated response to DNA damage, and that extracellular factors, such as serum, influence this response. Conclusion These findings highlight functions of wild type p53 protein in bipolar spindle formation, centrosome regulation, and growth control in bronchiolar Clara cells.

  18. Reglas electorales claras: el objetivo de todo organismo encargado de organizar un torneo comicial

    Directory of Open Access Journals (Sweden)

    Alejandro J. Robles Leal

    2017-07-01

    Full Text Available La importancia de establecer reglas claras y que estas sean conocidas por todos los actores electorales coadyuva al desarrollo exitoso de una contienda electoral. El artículo analiza las sentencias 1532-E1-2017 y 2173-E1-2017 del Tribunal Supremo de Elecciones las cuales, en términos generales, han dejado clara la obligación que tienen los partidos políticos de definir las reglas que regirán las contiendas electorales dentro de las agrupaciones políticas.

  19. 31 flavors to 50 shades of grey: battling Phytophthoras in native habitats managed by the Santa Clara Valley Water District

    Science.gov (United States)

    Janet Hillman; Tedmund J. Swiecki; Elizabeth A. Bernhardt; Heather K. Mehl; Tyler B. Bourret; David Rizzo

    2017-01-01

    The Santa Clara Valley Water District (District) is a wholesale water supplier for 1.8 million people in Santa Clara County, California. Capital, water utility, and stream maintenance projects result in extensive, long-term mitigation requirements in riparian, wetland, and upland habitats throughout the county. In 2014, several restoration sites on the valley floor and...

  20. 76 FR 9640 - Prevailing Rate Systems: Santa Clara, CA, Tulsa County, OK, and Angelina County, TX

    Science.gov (United States)

    2011-02-22

    ... OFFICE OF PERSONNEL MANAGEMENT 5 CFR Part 532 RIN 3206-AM22 Prevailing Rate Systems: Santa Clara... County, Texas, as an area of application to the Dallas, TX, NAF FWS wage area. The Federal Prevailing.... Accordingly, the U.S. Office of Personnel Management amends 5 CFR part 532 as follows: PART 532--PREVAILING...

  1. Molten carbonate fuel cell components: Lab scale electrochemical characterization with three-electrode cell; Caratterizzazione elettrochimica di componenti funzionali per MCFC mediante una cella a tre elettrodi in scala di laboratorio

    Energy Technology Data Exchange (ETDEWEB)

    Giorgi, L.; Simonetti, E.; Ciancia, A.; Pozio, A.

    1992-12-31

    This paper describes lab scale experiments conducted on a molten carbonate fuel cell (MCFC) with the aim of obtaining the electrical and electrochemical characteristics of the cell`s principle components. Suitable measurement and data analysis methods were developed to allow the identification of the cathode as the critical MCFC element and establish the cell`s operating regime from the point of view of overvoltage. An investigation was made of the influence, on obtainable power, of the method used to deliver current. Verification of the cell with a galvanostat allowed the maximization of electric power. The electrical resistance of the electrolyte was electronically compensated and the power-current curves were analyzed. Cyclic loading tests made it possible to study the time dependent stability of the MCFC and evidence anodic and cathodic potential variations which significantly affect stability. Electrochemical impedance spectroscopy was used to study reaction orders and electro-reduction mechanisms within the O/sub 2/-CO/sub 2/ cathodic mixture and to verify the performance of the electrodes in thin film electrolyte conditions.

  2. Automática de la línea La Moza – Santa Clara; Automatic of the line la Moza – Santa Clara

    Directory of Open Access Journals (Sweden)

    Marta Elena Bravo de las Casas

    2015-09-01

    Full Text Available La línea de 110 kV Santa Clara – La Moza, ubicada en medio de la línea de enlace entre la hidroeléctrica Robustiano León (Hanabanilla y la subestación Santa Clara 110 kV, es de gran importancia teniendo en cuenta que de la misma se obtiene la derivación de donde se alimenta la Subestación de 110/13,8 kV Gran Panel de nuevo tipo. La misma cuenta con un mecanismo de reenganche trifásico el cual no realiza de forma exitosa sus funciones, lo que trae afectaciones y dificultades a la hora de restablecer el sistema. En este trabajo se analizan las condiciones de operación de la región, así como la problemática de las automáticas instaladas proponiendo soluciones con el objetivo de lograr una operación eficaz ante las averías, sin que la hidroeléctrica Hanabanilla se pierda del Sistema Eléctrico Nacional y que no se pierda el suministro de energía eléctrica a la subestación Gran Panel.The 110 kV line Santa Clara –La Moza, which is located in the middle of the line of link between the hydroelectric Robustiano León (Hanabanilla and the substation Santa Clara 110 kV, is of great importance considering that of the same one obtains the derivation where new type Gran Panel Substation 110/13,8 feeds.Ithas athree-phasereclosingmechanismwhichdoes not performhis dutiessuccessfully, which brings affectationsanddifficultythe moment of restoringthe system. In this work, the operating conditions of the region are discussed, as well as the problem of the automatics installed, and is proposing solutions in order to ensure effective operation before faults, without that the Hanabanilla hydroelectric loses the syncrhronism with the Electrical National System and supply the substation Gran Panelis not lost.

  3. Novel method for isolation of murine clara cell secretory protein-expressing cells with traces of stemness.

    Directory of Open Access Journals (Sweden)

    Xiao-Yang Wang

    Full Text Available Clara cells are non-ciliated, secretory bronchiolar epithelial cells that serve to detoxify harmful inhaled substances. Clara cells also function as stem/progenitor cells for repair in the bronchioles. Clara cell secretory protein (CCSP is specifically expressed in pulmonary Clara cells and is widely used as a Clara cell marker. In addition CCSP promoter is commonly used to direct gene expression into the lung in transgenic models. The discovery of CCSP immunoreactivity in plasma membranes of airway lining cells prompted us to explore the possibility of enriching Clara cells by flow cytometry. We established a novel and simple method for the isolation of CCSP-expressing cell Clara cells using a combination of mechanical and enzymatic dissociation followed by flow cytometry sorting technology. We showed that ∼25% of dissociated cells from whole lung expressed CCSP. In the resulting preparation, up to 98% of cells expressed CCSP. Notably, we found that several common stem cell markers including CD44, CD133, Sca-1 and Sox2 were expressed in CCSP(+ cells. Moreover, CCSP(+ cells were able to form spheroid colonies in vitro with 0.97‰ efficiency. Parallel studies in vivo confirmed that a small population of CCSP(-expressing cells in mouse airways also demonstrates stem cell-like properties such as label retention and harboring rare bronchioalveolar stem cells (BASCs in terminal bronchioles (TBs. We conclude that CCSP(+ cells exhibit a number of stem cell-like features including stem cell marker expression, bronchosphere colony formation and self-renewal ability. Clara cell isolation by flow cytometry sorting is a useful method for investigating the function of primary Clara cells in stem cell research and mouse models.

  4. Efeito de reguladores de crescimento em uva apirênica, cv. BRS Clara Effect of growth regulators on the seedless grape cv. BRS Clara

    Directory of Open Access Journals (Sweden)

    Jair Costa Nachtigal

    2005-08-01

    Full Text Available O presente trabalho teve por objetivo verificar o efeito da aplicação de diferentes concentrações do ácido giberélico (AG3, do thidiazuron (TDZ e do forchlorfenuron (CPPU no aumento do tamanho dos cachos e das bagas e no teor de sólidos solúveis totais de uva sem semente, cv. BRS Clara. As plantas foram conduzidas no sistema de latada, sobre o porta-enxerto IAC 572, no espaçamento 2,5 x 2,0m e com irrigação por microaspersão. Os experimentos foram conduzidos na Estação Experimental de Viticultura Tropical, da Embrapa Uva e Vinho, em Jales-SP. Os reguladores de crescimento foram aplicados via pulverização localizada no cacho, utilizando-se de concentrações de 0 a 4mg.L-1 de CPPU; 0 a 10mg.L-1 de TDZ, e de 0 a 90mg.L-1 de AG3, isolados ou em conjunto. De modo geral, a aplicação dos reguladores de crescimento promove a melhoria da qualidade dos cachos da cv. BRS Clara; o uso do TDZ e do CPPU em conjunto com o AG3 produz um efeito sinérgico, proporcionando melhor resposta do que o uso isolado do AG3; os tratamentos com 60mg.L-1 de AG3; 20mg.L-1 de AG3 + 4mg.L-1 de CPPU, e 10mg.L-1 de AG3 + 5mg.L-1 de TDZ proporcionam os melhores resultados para o aumento do diâmetro das bagas; a aplicação de AG3 antes da floração da cv. BRS Clara provoca abortamento excessivo, reduzindo a qualidade comercial dos cachos; a utilização de concentrações elevadas dos reguladores reduz o teor de sólidos solúveis totais.The objective of this study was to evaluate the effect of different concentrations of gibberellic acid (AG3, thidiazuron (TDZ and forchlorfenuron (CPPU on the size of bunches and berries and on the total soluble solids content, when applied in different concentrations on the seedless grapes, cv. BRS Clara. The grapevines were grafted on the rootstock IAC 572, trained in the pergola system and, spaced 2.5 x 2.0m and irrigated by micro sprinklers. The experiments were carried out at the Embrapa Grape and Wine Experimental

  5. Estimation of carbon sequestration by tree species in three farms in Villa Clara province

    Directory of Open Access Journals (Sweden)

    José Carlos García Hernández

    2016-03-01

    Full Text Available The research took place in two farms of the Cifuentes municipality and in a farm of the Santa Clara municipality, province of Villa Clara. It was carried out from November 2008 to May 2009, with the objective of estimating the capture of Carbon by common arboreal species in these farms. The plant biomass analyses were made according to the methodology of Mercadet and Álvarez (2005. Several parameters were analyzed. Age, height and perimeter of the plants were the most influential parameters on the amount of carbon sequestered. In this regard, we performed a multivariate curve fitting, showing the age of the plants the highest percent of dependence (54.89%. Palma Real with values between 0.81 and 0.84 t / plant and the Mango between 0.60 and 0.81 t /plant of retained Carbon, were the most outstanding in the capture of Carbon.

  6. Power conversion and quality of the Santa Clara 2 MW direct carbonate fuel cell demonstration plant

    Energy Technology Data Exchange (ETDEWEB)

    Skok, A.J. [Fuel Cell Engineering Corp., Danbury, CT (United States); Abueg, R.Z. [Basic Measuring Instruments, Santa Clara, CA (United States); Schwartz, P. [Fluor Daniel, Inc., Irvine, CA (United States)] [and others

    1996-12-31

    The Santa Clara Demonstration Project (SCDP) is the first application of a commercial-scale carbonate fuel cell power plant on a US electric utility system. It is also the largest fuel cell power plant ever operated in the United States. The 2MW plant, located in Santa Clara, California, utilizes carbonate fuel cell technology developed by Energy Research Corporation (ERC) of Danbury, Connecticut. The ultimate goal of a fuel cell power plant is to deliver usable power into an electrical distribution system. The power conversion sub-system does this for the Santa Clara Demonstration Plant. A description of this sub-system and its capabilities follows. The sub-system has demonstrated the capability to deliver real power, reactive power and to absorb reactive power on a utility grid. The sub-system can be operated in the same manner as a conventional rotating generator except with enhanced capabilities for reactive power. Measurements demonstrated the power quality from the plant in various operating modes was high quality utility grade power.

  7. Evaluation of animal control measures on pet demographics in Santa Clara County, California, 1993–2006

    Directory of Open Access Journals (Sweden)

    Philip H. Kass

    2013-02-01

    Full Text Available The measurable benefits of animal control programs are unknown and the aim of this study was to determine the impact of these programs on pet population changes. A prospective cross-sectional study of 1000 households was implemented in 2005 to evaluate characteristics of the owned and unowned population of dogs and cats in Santa Clara County, California. The same population was previously studied 12 years earlier. During this time period, the county instituted in 1994 and then subsequently disestablished a municipal spay/neuter voucher program for cats. Dog intakes declined from 1992–2005, as they similarly did for an adjacent county (San Mateo. However, cat intakes declined significantly more in Santa Clara County than San Mateo, with an average annual decline of approximately 700 cats for the 12 year period. Time series analysis showed a greater than expected decline in the number of cats surrendered to shelters in Santa Clara County during the years the voucher program was in effect (1994–2005. The net savings to the county by reducing the number of cat shelter intakes was estimated at approximately $1.5 million. The measurable benefits of animal control programs are unknown and the aim of this study was to determine the impact of these programs on pet population changes.

  8. Evaluation of animal control measures on pet demographics in Santa Clara County, California, 1993-2006.

    Science.gov (United States)

    Kass, Philip H; Johnson, Karen L; Weng, Hsin-Yi

    2013-01-01

    The measurable benefits of animal control programs are unknown and the aim of this study was to determine the impact of these programs on pet population changes. A prospective cross-sectional study of 1000 households was implemented in 2005 to evaluate characteristics of the owned and unowned population of dogs and cats in Santa Clara County, California. The same population was previously studied 12 years earlier. During this time period, the county instituted in 1994 and then subsequently disestablished a municipal spay/neuter voucher program for cats. Dog intakes declined from 1992-2005, as they similarly did for an adjacent county (San Mateo). However, cat intakes declined significantly more in Santa Clara County than San Mateo, with an average annual decline of approximately 700 cats for the 12 year period. Time series analysis showed a greater than expected decline in the number of cats surrendered to shelters in Santa Clara County during the years the voucher program was in effect (1994-2005). The net savings to the county by reducing the number of cat shelter intakes was estimated at approximately $1.5 million. The measurable benefits of animal control programs are unknown and the aim of this study was to determine the impact of these programs on pet population changes.

  9. Carcinoma odontogénico de células claras

    Directory of Open Access Journals (Sweden)

    Sergio Alberto Flores Alvarado

    2011-03-01

    Full Text Available El carcinoma odontogénico de células claras es un raro tumor odontogénico que se presenta principalmente en la parte anterior de la mandíbula, mayormente en mujeres entre la quinta y séptima década de vida. Se caracteriza histológicamente por redes de células con citoplasma claro mezcladas con células que contienen citoplasma eosinófilo. Es sumamente agresivo y puede presentar metástasis local o a distancia. Al emplearse el tratamiento por enucleación y curetaje, frecuentemente da lugar a recurrencia, por lo que se aconseja el tratamiento radical de resección mandibular hasta una zona libre de lesión. El carcinoma odontogénico de células claras debe ser considerado en el diagnóstico diferencial de tumores mandibulares que presenten células claras para el establecimiento del plan de tratamiento adecuado. Se debe incluir el seguimiento a largo plazo del paciente. Se presenta el caso de un paciente femenino de 69 años de edad, con una lesión presente en la región presinfisaria derecha, sin afectación de ganglios linfáticos regionales o metástasis aparente. Se efectuó osteotomía segmentaria mandibular y reconstrucción con placa de titanio.

  10. Tem orixá no samba: Clara Nunes e a presença do candomblé e da umbanda na música popular brasileira

    Directory of Open Access Journals (Sweden)

    Rachel Rua Baptista Bakke

    2007-12-01

    Full Text Available Algumas informações sobre as religiões afro-brasileiras (candomblé e umbanda nos chegam por meios como a indústria fonográfica, o rádio e a televisão. Nesse cenário, a música popular brasileira (MPB ocupa importante papel de divulgadora dessa religiosidade. Em vista disso, nesse trabalho procuro interpretar os modos pelos quais os valores dessas religiões aparecem na MPB tendo como campo empírico a produção artística de Clara Nunes (análise de letra de música, da performance em shows, clipes e apresentações em programas de TV, assim como dos símbolos escolhidos na divulgação de seu trabalho, presentes em encartes e capas de LPs.Information about Afro-Brazilian religions (candomblé and umbanda often reaches the general public through the phonographic industry, radio and television. Brazilian Popular Music (MPB is also an important source of information about these religions. For this reason this paper attempts to interpret the ways in which the values from these religions appear on MPB, having as an empirical field the artistic production of Clara Nunes (analyzes of lyrics, performances in concerts, video clips and appearances in TV shows, as well as the symbols chosen to disseminate her work, shown in LP covers and inner-sleeves.

  11. Perspectives of Mobile Versus Fixed Mammography in Santa Clara County, California: A Focus Group Study.

    Science.gov (United States)

    Chen, Yi-Ren; Chang-Halpenny, Christine; Kumarasamy, Narmadan A; Venegas, Angela; Braddock Iii, Clarence H

    2016-02-12

    Our aim was to examine underserved women's perceptions on mobile versus fixed mammography in Santa Clara, California through a focus group study.  Research has shown that medically underserved women have higher breast cancer mortality rates correlated with under-screening and a disproportional rate of late-stage diagnosis. The Community Health Partnership in Santa Clara County, California runs the Community Mammography Access Project (CMAP) that targets nearly 20,000 medically underserved women over the age of 40 in the county through the collaborative effort of an existing safety net of healthcare providers. However, little data exists on the advantages or disadvantages of mobile mammography units from the patient perspective.   We assessed underserved women's perspectives on mammography services in Santa Clara County through two focus groups from women screened at mobile or fixed site programs. Patients were recruited from both CMAP clinics and a county hospital, and focus group data were analyzed using content analysis.  We found that women from both the mobile and fixed sites shared similar motivating factors for getting a mammogram. Both groups recognized that screening was uncomfortable but necessary for good health and had positive feedback about their personal physicians. However, mobile participants, in particular, appreciated the atmosphere of mobile screening, reported shorter wait times, and remarked on the good communication from the clinic staff and empathetic treatment they received. However, mobile participants also expressed concern about the quality of films at mobile sites due to delayed initial reading of the films.   Mobile mammography offers a unique opportunity for women of underserved populations to access high satisfaction screenings, and it encourages a model similar to CMAP in other underserved areas. However, emphasis should be placed on providing a warm and welcoming environment for patients and ensuring the quality of

  12. Paleomagnetic record determined in cores from deep research wells in the Quaternary Santa Clara basin, California

    Science.gov (United States)

    Mankinen, Edward A.; Wentworth, Carl M.

    2016-01-01

    Paleomagnetic study of cores from six deep wells provides an independent temporal framework for much of the alluvial stratigraphy of the Quaternary basin beneath the Santa Clara Valley. This stratigraphy consists of 8 upward-fining cycles in the upper 300 m of section and an underlying 150 m or more of largely fine-grained sediment. The eight cycles have been correlated with the marine oxygen isotope record, thus providing one means of dating the section. The section has also proved to contain a rich paleomagnetic record despite the intermittent sedimentation characteristic of alluvial environments.

  13. CLARA-A1: a cloud, albedo, and radiation dataset from 28 yr of global AVHRR data

    Directory of Open Access Journals (Sweden)

    K.-G. Karlsson

    2013-05-01

    Full Text Available A new satellite-derived climate dataset – denoted CLARA-A1 ("The CM SAF cLoud, Albedo and RAdiation dataset from AVHRR data" – is described. The dataset covers the 28 yr period from 1982 until 2009 and consists of cloud, surface albedo, and radiation budget products derived from the AVHRR (Advanced Very High Resolution Radiometer sensor carried by polar-orbiting operational meteorological satellites. Its content, anticipated accuracies, limitations, and potential applications are described. The dataset is produced by the EUMETSAT Climate Monitoring Satellite Application Facility (CM SAF project. The dataset has its strengths in the long duration, its foundation upon a homogenized AVHRR radiance data record, and in some unique features, e.g. the availability of 28 yr of summer surface albedo and cloudiness parameters over the polar regions. Quality characteristics are also well investigated and particularly useful results can be found over the tropics, mid to high latitudes and over nearly all oceanic areas. Being the first CM SAF dataset of its kind, an intensive evaluation of the quality of the datasets was performed and major findings with regard to merits and shortcomings of the datasets are reported. However, the CM SAF's long-term commitment to perform two additional reprocessing events within the time frame 2013–2018 will allow proper handling of limitations as well as upgrading the dataset with new features (e.g. uncertainty estimates and extension of the temporal coverage.

  14. Pulmonary heat shock protein expression after exposure to a metabolically activated Clara cell toxicant: relationship to protein adduct formation

    International Nuclear Information System (INIS)

    Williams, Kurt J.; Cruikshank, Michael K.; Plopper, Charles G.

    2003-01-01

    Heat shock proteins/stress proteins (Hsps) participate in regulation of protein synthesis and degradation and serve as general cytoprotectants, yet their role in lethal Clara cell injury is not clear. To define the pattern of Hsp expression in acute lethal Clara cell injury, mice were treated with the Clara cell-specific toxicant naphthalene (NA), and patterns of expression compared to electrophilic protein adduction and previously established organellar degradation and gluathione (GSH) depletion. In sites of lethal injury (distal bronchiole), prior to organellar degradation (1 h post-NA), protein adduction is detectable and ubiquitin, Hsp 25, Hsp 72, and heme-oxygenase 1 (HO-1) are increased. Maximal Hsp expression, protein adduction, and GSH depletion occur simultaneous (by 2-3 h) with early organelle disruption. Hsp expression is higher later (6-24 h), only in exfoliating cells. In airway sites (proximal bronchiole) with nonlethal Clara cell injury elevation of Hsp 25, 72, and HO-1 expression follows significant GSH depletion (greater than 50% 2 h post-NA). This data build upon our previous studies and we conclude that (1) in lethal (terminal bronchiole) and nonlethal (proximal bronchiole) Clara cell injury, Hsp induction is associated with the loss of GSH and increased protein adduction, and (2) in these same sites, organelle disruption is not a prerequisite for Hsp induction

  15. Analysis of the radioactivity in the 'Elguea' spa, Villa Clara, Cuba; Analisis de la radiactividad en el balneario 'Elguea' , Villa Clara, Cuba

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez G, I.M.; Zerquera, J.T.; Carrazana G, J.; Capote F, E.; Rodriguez C, G. [CPHR, La Habana (Cuba)]. e-mail: isis@cphr.edu.cu

    2006-07-01

    The 'Elguea' spa, located in the north coast of the county of Villa Clara, Cuba, is considered one of those more important spas of Latin America. The waters of this spa are rich in salts of chlorine, sodium, bromine, sulfides and its contain radon. As a result of measurements of environmental gamma dose rates carried out in the area of the spa, its were considered levels of dose between 0.13 and 2.3 mSv. The obtained results motivated that it was carried out a characterization, from the radiological point of view, of the spa. This characterization is of supreme importance to be able to evaluate the impact that it has and the discharges of its waters on the environment, as well as, those dose that the population potentially affected can receive by these discharges. With this end its were carried out quantitative determinations of those existent natural more significant radionuclides in different environmental objects coming from the area of the spa and its surroundings, as well as one characterization gamma 'in situ' of the same one. The obtained results are present in this work. (Author)

  16. Analysis of the radioactivity in the 'Elguea' spa, Villa Clara, Cuba; Analisis de la radiactividad en el balneario 'Elguea' , Villa Clara, Cuba

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez G, I M; Zerquera, J T; Carrazana G, J; Capote F, E; Rodriguez C, G [CPHR, La Habana (Cuba)

    2006-07-01

    The 'Elguea' spa, located in the north coast of the county of Villa Clara, Cuba, is considered one of those more important spas of Latin America. The waters of this spa are rich in salts of chlorine, sodium, bromine, sulfides and its contain radon. As a result of measurements of environmental gamma dose rates carried out in the area of the spa, its were considered levels of dose between 0.13 and 2.3 mSv. The obtained results motivated that it was carried out a characterization, from the radiological point of view, of the spa. This characterization is of supreme importance to be able to evaluate the impact that it has and the discharges of its waters on the environment, as well as, those dose that the population potentially affected can receive by these discharges. With this end its were carried out quantitative determinations of those existent natural more significant radionuclides in different environmental objects coming from the area of the spa and its surroundings, as well as one characterization gamma 'in situ' of the same one. The obtained results are present in this work. (Author)

  17. Quincuagésimo primer aniversario del Hospital Antituberculoso Santa Clara de Santafé de Bogotá

    Directory of Open Access Journals (Sweden)

    Gilberto Rueda Pérez

    1993-07-01

    Full Text Available EI Hospital Santa Clara fue fundado el 16 de julio de 1942, durante la presidencia del Dr. Eduardo Santos, a solicitud de su esposa dona Lorencita Villegas de Santos. EI hospital se construyo en esa época como sanatorio, para la atención, cuidado humano y científico de los pacientes afectados con tuberculosis. Inicialmente el hospital como con 250 camas para adultos y niños. Su nombre "Santa Clara" fue escogido en recuerdo de Clarita, hija única de los benefactores, muerta prematuramente poco tiempo antes.

  18. Study of the reaction 22Ne(131 MeV) + 208Pb with a PIAVE-ALPI test beam and the PRISMA-CLARA set-up

    International Nuclear Information System (INIS)

    Mason, P.; Marginean, N.; Stefanini, A.M.

    2005-01-01

    An opportunity to study the system 22 Ne+ 208 Pb in the proximity of the Coulomb barrier with the PRISMACLARA apparatus was given by a test of the PIAVE-ALPI accelerator in mid-December 2005. The 22 Ne projectiles, having the kinetic energy of 131 MeV, collided with a 208 Pb target 300 μg/cm 2 thick. (The beam was run for ∼20 hours with a current of ∼6 particle-nA). The reaction products, mainly originated by scattering or transfer processes, were detected by the PRISMA spectrometer (positioned in the proximity of the grazing angle, ∼70 degrees), coupled to the CLARA array of germanium detectors

  19. 76 FR 68784 - Notice of Realty Action: Direct Sale of Public Land in Santa Clara County, CA

    Science.gov (United States)

    2011-11-07

    ... California Limited Liability Company, for the appraised fair market value of $16,000. DATES: Written comments...] Notice of Realty Action: Direct Sale of Public Land in Santa Clara County, CA AGENCY: Bureau of Land...), Hollister Field Office, proposes to sell a parcel of public land consisting of approximately 15.97 acres...

  20. Santa Clara County Survey of Drug, Alcohol, and Tobacco Use among Students in Grades 5, 7, 9, 11.

    Science.gov (United States)

    Constantine, Norm; And Others

    This report presents findings from the Santa Clara County (California) survey of Drug, Alcohol, and Tobacco Use among Students in Grades 5, 7, 9, and 11 administered during the spring of 1991 to 5,180 students in 51 randomly selected county schools. An executive summary discusses sampling error, sample demographics, and findings on drug use…

  1. 76 FR 72972 - Notice of Realty Action: Competitive Sale of Public Land in Santa Clara County, CA

    Science.gov (United States)

    2011-11-28

    ... appraised fair market value. The appraised value of the public land is $135,000. DATES: Comments regarding... described contains 23.42 acres, more or less, in Santa Clara County, California. Appraised fair market value... no known mineral values in the land proposed for sale. The BLM proposes that conveyance of the...

  2. 76 FR 16811 - Notice of Realty Action: Direct Sale of Public Lands in Santa Clara County, CA

    Science.gov (United States)

    2011-03-25

    ... Space Authority for the appraised fair market value. The total appraised value of all three parcels is... appraised fair market value of $80,000. Parcel No. 2, T. 10S., R. 2E., Sec. 5, lot 2. The area described contains 23.42 acres in Santa Clara County. The parcel has an appraised fair market value of $135,000...

  3. Evaluación de la satisfacción del cliente de la Drogueria Villa Clara, 2008-2009 Assessment of the client satisfaction in Villa Clara Drugstore, 2008-2009

    Directory of Open Access Journals (Sweden)

    Geidy Lorezo Monteagudo

    2012-03-01

    Full Text Available Introducción: la Droguería Villa Clara es la encargada de la distribución de medicamentos, reactivos y otros insumos médicos en esta provincia de Cuba. Mantiene relaciones comerciales con gran variedad de clientes, pero los más importantes son los pertenecientes al Sistema de Salud. Objetivo: evaluar la calidad del servicio brindado por esta entidad a los hospitales, policlínicos y farmacias de la provincia durante el 2008 y el 2009. Métodos: se conformó una muestra representativa de estas instituciones en todos los municipios de Villa Clara y se aplicaron encuestas al personal responsable de medicamentos en cada tipo unidad. Se determinó el índice de satisfacción para cada cliente encuestado en particular, así como para policlínicos, hospitales y farmacias en sentido general. Por otra parte, se determinó el índice de satisfacción alcanzado de forma global por la droguería en cada año evaluado. Resultados: el servicio brindado por la Droguería Villa Clara durante el 2008 y el 2009 fue calificado como bueno, con una mejora palpable al obtenerse índices de satisfacción que variaron de 84,2 % en el 2008 a 88,3 % en el 2009. Conclusiones: los clientes del proceso de distribución de medicamentos, perciben la disponibilidad de medicamentos como el problema fundamental de la distribución en la provincia.Introduction: Villa Clara Drugstore is in charge of the distribution of drugs, reagents, and other medical inputs in this Cuban province. It has commercial relations with a wide variety of clients, but the most important ones are those within the health system. Objective: to evaluate the quality of service rendered by this entity to hospitals, polyclinics and pharmacies in the province in 2008 and 2009. Methods: a representative sample from these institutions in all Villa Clara municipalities was selected and the personnel in charge of medications in each unit was surveyed. Satisfaction index for each surveyed client was

  4. Elastic stresses and plastic deformations in 'Santa Clara' tomato fruits caused by package dependent compression

    Directory of Open Access Journals (Sweden)

    PEREIRA ADRIANA VARGAS

    2000-01-01

    Full Text Available The objective of this work was to study the fruit compression behavior aiming to develop new tomato packages. Deformations caused by compression forces were observed inside packages and in individual 'Santa Clara' tomato fruit. The forces applied by a transparent acrylic lever to the fruit surface caused pericarp deformation and the flattened area was proportional to the force magnitude. The deformation was associated to the reduction in the gas volume (Vg, caused by expulsion of the air from the loculus cavity and reduction in the intercellular air volume of the pericarp. As ripening advanced, smaller fractions of the Vg reduced by the compressive force were restored after the stress was relieved. The lack of complete Vg restoration was an indication of permanent plastic deformations of the stressed cells. Vg regeneration (elastic recovery was larger in green fruits than in the red ones. The ratio between the applied force and the flattened area (flattening pressure, which depends on cell turgidity, decreased during ripening. Fruit movements associated with its depth in the container were observed during storage in a transparent glass container (495 x 355 x 220 mm. The downward movement of the fruits was larger in the top layers because these movements seem to be driven by a summation of the deformation of many fruits in all layers.

  5. Osmotic Effect of Conditioning on Seeds of Tomato (Solanum Lycopersicum L. Santa Clara Variety

    Directory of Open Access Journals (Sweden)

    Brigitte Liliana Moreno Medina

    2013-12-01

    Full Text Available The tomato (Solanum lycopersicum L. is one of the most important vegetables in the world, taking into account its nutritional potential and high economic value. In this crop the quality of seed depends on various factors, one of which is its physiology, which is determined by a germination and viability test. Osmotic seed conditioning is reported to be a technique for improving the physiological quality through the uniformity of the germination percentage. For this reason, the objective of this research was to evaluate the osmotic conditioning on tomato seeds of the Santa Clara variety. Using treatments of four doses of potassium nitrate (0, 100, 200 and 400 mg L-1 , the seeds were imbibitioned for 24 hours in solution and then washed with distilled water. They were placed in petri dishes in random order with three replications for a total of 12 experimental units, consisting of 35 seeds. The method seeks to hydrate the seeds with a solution of given concentration and for a period of time, in order to activate the seed metabolism. The best result was obtained with the treatment of 200 mg L-1 of potassium nitrate, followed by 400 mg L-1 , represented by a lower TMG , lower and higher PG VMG.

  6. Determination of Clara cell protein urinary elimination as a marker of tubular dysfunction.

    Science.gov (United States)

    Martín-Granado, Ascensión; Vázquez-Moncholí, Carmen; Luis-Yanes, María Isabel; López-Méndez, Marisela; García-Nieto, Víctor

    2009-04-01

    Clara cell 16-kDa protein (CC16) is a protein expressed primarily by the bronchial cells. It is rapidly eliminated by glomerular filtration, reabsorbed almost entirely, and catabolized in proximal tubule cells. To date, normal values for urinary CC16 in healthy children have not been determined. We have studied 63 pediatric patients (mean age 8.17 +/- 3.91 years) and 31 healthy children (control group; mean age 8.83 +/- 3.65 years). In the control group, the CC16/creatinine ratio was 1.22 +/- 1.52 microg/g. In 16 out of 31 control children, the value of the ratio was zero. Fourteen patients (22.2%) showed a high CC16/creatinine ratio; in contrast, among these same patients, the ratio N-acetyl-beta-D: -glucosaminidase (NAG)/creatinine was elevated in seven cases (11.1%) and the ratio beta2-microglobulin/creatinine was elevated in seven cases (11.1%). The three parameters were in agreement in 51 patients (80.9%). Among the patients, the CC16/creatinine ratio was correlated with both the beta2-microglobulin/creatinina ratio (r = 0.76, P < 0.001) and the NAG/creatinine ratio (r = 0.6, P < 0.001). Our findings indicate that CC16 is a good marker of proximal tubular function in childhood. The highest observed values were in children with proximal tubulopathies, in children with chronic renal failure, and in those treated with cyclosporine.

  7. Analysis of the radioactivity in the 'Elguea' spa, Villa Clara, Cuba

    International Nuclear Information System (INIS)

    Fernandez G, I.M.; Zerquera, J.T.; Carrazana G, J.; Capote F, E.; Rodriguez C, G.

    2006-01-01

    The 'Elguea' spa, located in the north coast of the county of Villa Clara, Cuba, is considered one of those more important spas of Latin America. The waters of this spa are rich in salts of chlorine, sodium, bromine, sulfides and its contain radon. As a result of measurements of environmental gamma dose rates carried out in the area of the spa, its were considered levels of dose between 0.13 and 2.3 mSv. The obtained results motivated that it was carried out a characterization, from the radiological point of view, of the spa. This characterization is of supreme importance to be able to evaluate the impact that it has and the discharges of its waters on the environment, as well as, those dose that the population potentially affected can receive by these discharges. With this end its were carried out quantitative determinations of those existent natural more significant radionuclides in different environmental objects coming from the area of the spa and its surroundings, as well as one characterization gamma 'in situ' of the same one. The obtained results are present in this work. (Author)

  8. Seasonal trends of atmospheric nitrogen dioxide and sulfur dioxide over North Santa Clara, Cuba.

    Science.gov (United States)

    Alejo, Daniellys; Morales, Mayra C; de la Torre, Jorge B; Grau, Ricardo; Bencs, László; Van Grieken, René; Van Espen, Piet; Sosa, Dismey; Nuñez, Vladimir

    2013-07-01

    Atmospheric nitrogen dioxide (NO2) and sulfur dioxide (SO2) levels were monitored simultaneously by means of Radiello passive samplers at six sites of Santa Clara city, Cuba, in the cold and the warm seasons in 2010. The dissolved ionic forms of NO2 and SO2 as nitrate and sulfite plus sulfate, respectively, were determined by means of ion chromatography. Analysis of NO2 as nitrite was also performed by UV-Vis spectrophotometry. For NO2, significant t tests show good agreement between the results of IC and UV-Vis methods. The NO2 and SO2 concentrations peaked in the cold season, while their minimum levels were experienced in the warm season. The pollutant levels do not exceed the maximum allowable limit of the Cuban Standard 39:1999, i.e., 40 μg/m(3) and 50 μg/m(3) for NO2 and SO2, respectively. The lowest pollutant concentrations obtained in the warm season can be attributed to an increase in their removal via precipitation (scavenging) while to the decreased traffic density and industrial emission during the summer holidays (e.g., July and August).

  9. The primitives of Santa Clara of Ubeda: stylistic and iconographic study, critical appraisals and vicissitudes of a dispersed heritage

    Directory of Open Access Journals (Sweden)

    Clara Beltrán Catalán

    2016-12-01

    Full Text Available The authors study the stylistic and iconographic aspects of a collection of paintings on wood dating from the 15th and 16th centuries, originally in the Royal Monastery of Santa Clara at Úbeda. This collection was sold in the 1920s with the participation of the antique dealer Celestino Dupont. The research is complemented by an analysis of the critical appraisals given to these works and their history since their introduction into the art market.

  10. Automatización de la red de 34,5kV en la provincia de Villa Clara; Automation of 34,5 kV network in the province of Villa Clara

    Directory of Open Access Journals (Sweden)

    Obedi Álvarez Díaz

    2012-11-01

    Full Text Available En la actualidad la operación de la redes de 34.5kV de la provincia de Villa Clara se hace muy complejo debido a que los desconectivos existentes son operados manualmente por el personal y los tiempos de operación son extensos. El objetivo de la implementación de la automatización de las redes de 34.5kV en Villa Clara es operar dicha red de la forma más eficiente posible, donde se le suministre la energía eléctrica a los clientes con mínimos costos de operación, alto nivel de confiabilidad, disminución de la frecuencia de interrupciones y también de los tiempos. Se seleccionaron los lazos más importantes de la provincia, los cuales incluyen generación distribuida, realizándoles corridas de flujo de carga usando el software PowerSystem Explorer (PSX, obteniendo los lugares donde se deben colocar los recerradores. Estos se comunicarán entre sí, pudiendo ser configurables para distintas condiciones, además de poder operarlos a distancia.  At present the operation of the 34.5kV network of the province of Villa Clara is very complex because the existing disconnected are operated by staff and operating times are long. The objective of the implementation of the automation 34.5 kV networks in Villa Clara is operate as efficiently way as possible, where you supply the electricity to customers with minimal operating costs, high reliability, reduced the frequency of interruptions and the times. There have been selected the most important loops in the province, which include distributed generation, performing load flow runs using the Power System Explorer software(PSX, obtaining the locations should be placed reclosing. They shall communicate with each otherand can be configured for different conditions, in addition to being to operate them at a distance.

  11. Evaluación de la satisfacción del cliente de la Drogueria Villa Clara, 2008-2009

    Directory of Open Access Journals (Sweden)

    Geidy Lorezo Monteagudo

    2012-03-01

    Full Text Available Introducción: la Droguería Villa Clara es la encargada de la distribución de medicamentos, reactivos y otros insumos médicos en esta provincia de Cuba. Mantiene relaciones comerciales con gran variedad de clientes, pero los más importantes son los pertenecientes al Sistema de Salud. Objetivo: evaluar la calidad del servicio brindado por esta entidad a los hospitales, policlínicos y farmacias de la provincia durante el 2008 y el 2009. Métodos: se conformó una muestra representativa de estas instituciones en todos los municipios de Villa Clara y se aplicaron encuestas al personal responsable de medicamentos en cada tipo unidad. Se determinó el índice de satisfacción para cada cliente encuestado en particular, así como para policlínicos, hospitales y farmacias en sentido general. Por otra parte, se determinó el índice de satisfacción alcanzado de forma global por la droguería en cada año evaluado. Resultados: el servicio brindado por la Droguería Villa Clara durante el 2008 y el 2009 fue calificado como bueno, con una mejora palpable al obtenerse índices de satisfacción que variaron de 84,2 % en el 2008 a 88,3 % en el 2009. Conclusiones: los clientes del proceso de distribución de medicamentos, perciben la disponibilidad de medicamentos como el problema fundamental de la distribución en la provincia.

  12. Clara Harrison Town and the origins of the first institutional commitment law for the "feebleminded": psychologists as expert diagnosticians.

    Science.gov (United States)

    Farreras, Ingrid G

    2014-11-01

    The first law providing for the commitment of "feeble-minded" individuals in the United States was passed in 1915, in the state of Illinois. House Bill 655 not only allowed for the permanent, involuntary institutionalization of feeble-minded individuals, but it shifted the commitment and discharge authority from the institution superintendents to the courts. Clara Harrison Town, a student of Lightner Witmer, and the state psychologist at the second largest institution for feeble-minded individuals in the country, was instrumental in this law passing and in ensuring that psychologists, for the first time, be viewed as court "experts" when testifying as to the feeble mindedness of individuals.

  13. Presencia de Stegomastodon (Gomphotheriidae, Proboscidea en el Pleistoceno Superior de la zona costera de Santa Clara del Mar (Argentina

    Directory of Open Access Journals (Sweden)

    Alberdi, M. T.

    2008-12-01

    Full Text Available Gomphotheriidae fossil remains from shore level of Santa Clara del Mar (Mar del Plata, Argentina are described. The comparative morphological and multivariate analysis of the m3 with other South American gomphotheres remains, mainly from Argentina, Bolivia and Brazil, allow their identification as Stegomastodon platensis. This species seems better adapted to live on the middle latitudes and warm climatic conditions. The possible movement routes from north to the most austral zones or areas are discussed. Stegomastodon from South America is a big-size form which is present along the East route and in several shore areas of Ecuador and Peru. In the present work some palaeoecological and palaeogeographical considerations are included. From a radiometric AMS datum, the remains of Santa Clara del Mar are dated in the late Pleistocene (17,880 ± 60 AP.Se describen restos bien conservados de gonfoterios (Mammalia, Proboscidea encontrados en los niveles pleistocenos que afloran en los acantilados costeros de Santa Clara del Mar (Mar del Plata, Argentina. Se analizan algunos de sus caracteres más importantes y se compara con otros gonfoterios provenientes de distintas localidades de Argentina, Brasil y Bolivia. El estudio comparativo, mediante análisis multivariante del m3, permitió su identificación como Stegomastodon platensis. Nosotros consideramos que todos los Gomphotheriidae del territorio actual de Argentina deberían incluirse en un único género y una única especie: Stegomastodon platensis. Esta especie parece estar mejor adaptada a vivir en latitudes medias, y en condiciones climáticas templadas. Se discuten sus posibles vías de desplazamiento desde el norte hacia zonas o áreas más australes. Stegomastodon de América del Sur es una forma de gran tamaño, que se encuentra a lo largo de la ruta del este y en algunas áreas costeras de Ecuador y Perú. En el presente artículo se incluyen algunas consideraciones paleoecológicas y

  14. Programa de promoción de salud para infantes preescolares de círculos infantiles Santa Clara

    OpenAIRE

    Quintero Fleites, Eva Josefina

    2011-01-01

    Con el objetivo de desarrollar un Programa de promoción de salud para infantes preescolares, se realizó una investigación de desarrollo en el área de promoción de salud, con el universo de 34 círculos infantiles del municipio Santa Clara. Las muestras fueron de dos círculos infantiles, tanto para el diagnóstico como para el estudio piloto, y de ocho círculos infantiles para la extensión de la experiencia (cinco experimentales y tres controles). Las etapas investigativas fueron: diagnóst...

  15. Predicted Liquefaction in the Greater Oakland and Northern Santa Clara Valley Areas for a Repeat of the 1868 Hayward Earthquake

    Science.gov (United States)

    Holzer, T. L.; Noce, T. E.; Bennett, M. J.

    2008-12-01

    Probabilities of surface manifestations of liquefaction due to a repeat of the 1868 (M6.7-7.0) earthquake on the southern segment of the Hayward Fault were calculated for two areas along the margin of San Francisco Bay, California: greater Oakland and the northern Santa Clara Valley. Liquefaction is predicted to be more common in the greater Oakland area than in the northern Santa Clara Valley owing to the presence of 57 km2 of susceptible sandy artificial fill. Most of the fills were placed into San Francisco Bay during the first half of the 20th century to build military bases, port facilities, and shoreline communities like Alameda and Bay Farm Island. Probabilities of liquefaction in the area underlain by this sandy artificial fill range from 0.2 to ~0.5 for a M7.0 earthquake, and decrease to 0.1 to ~0.4 for a M6.7 earthquake. In the greater Oakland area, liquefaction probabilities generally are less than 0.05 for Holocene alluvial fan deposits, which underlie most of the remaining flat-lying urban area. In the northern Santa Clara Valley for a M7.0 earthquake on the Hayward Fault and an assumed water-table depth of 1.5 m (the historically shallowest water level), liquefaction probabilities range from 0.1 to 0.2 along Coyote and Guadalupe Creeks, but are less than 0.05 elsewhere. For a M6.7 earthquake, probabilities are greater than 0.1 along Coyote Creek but decrease along Guadalupe Creek to less than 0.1. Areas with high probabilities in the Santa Clara Valley are underlain by latest Holocene alluvial fan levee deposits where liquefaction and lateral spreading occurred during large earthquakes in 1868 and 1906. The liquefaction scenario maps were created with ArcGIS ModelBuilder. Peak ground accelerations first were computed with the new Boore and Atkinson NGA attenuation relation (2008, Earthquake Spectra, 24:1, p. 99-138), using VS30 to account for local site response. Spatial liquefaction probabilities were then estimated using the predicted ground motions

  16. Bekämpft, umstritten und geliebt: Clara Zetkin. Eine Würdigung zum 150. Geburtstag Embattled, Controversial, and Loved: Clara Zetkin. An Appreciation on Her 150th Birthday

    Directory of Open Access Journals (Sweden)

    Dorothee Rempfer

    2008-03-01

    Full Text Available Florence Hervé, Dozentin, freie Journalisten und Autorin, hat in diesem anlässlich des Jubiläums erschienenen Band mit Texten von und über Clara Zetkin einen thematisch gegliederten biographischen Überblick vorgelegt. Hervé ordnet die Politikerin und Frauenrechtlerin anhand der Materialien in historische Zusammenhänge ein und setzt sich kritisch mit ihren Gedanken und Theorien auseinander. Dabei vertritt sie den Anspruch, Zetkin auch von ihren bisher weniger bekannten Seiten zu zeigen. Dies gelingt ihr jedoch nur ansatzweise.Lecturer, independent journalist, and author Florence Hervé provides a thematically structured biographical overview for this volume of texts from and about Clara Zetkin, which appeared in conjunction with the celebration of her 150th birthday. Hervé classifies the politician and women’s right activist according to materials in historical context and critical approaches Zetkin’s thoughts and theories. In so doing, she asserts the necessity of displaying Zetkin’s lesser-known aspects. However, the author only partially achieves this goal.

  17. Liquefaction Hazard Maps for Three Earthquake Scenarios for the Communities of San Jose, Campbell, Cupertino, Los Altos, Los Gatos, Milpitas, Mountain View, Palo Alto, Santa Clara, Saratoga, and Sunnyvale, Northern Santa Clara County, California

    Science.gov (United States)

    Holzer, Thomas L.; Noce, Thomas E.; Bennett, Michael J.

    2008-01-01

    Maps showing the probability of surface manifestations of liquefaction in the northern Santa Clara Valley were prepared with liquefaction probability curves. The area includes the communities of San Jose, Campbell, Cupertino, Los Altos, Los Gatos Milpitas, Mountain View, Palo Alto, Santa Clara, Saratoga, and Sunnyvale. The probability curves were based on complementary cumulative frequency distributions of the liquefaction potential index (LPI) for surficial geologic units in the study area. LPI values were computed with extensive cone penetration test soundings. Maps were developed for three earthquake scenarios, an M7.8 on the San Andreas Fault comparable to the 1906 event, an M6.7 on the Hayward Fault comparable to the 1868 event, and an M6.9 on the Calaveras Fault. Ground motions were estimated with the Boore and Atkinson (2008) attenuation relation. Liquefaction is predicted for all three events in young Holocene levee deposits along the major creeks. Liquefaction probabilities are highest for the M7.8 earthquake, ranging from 0.33 to 0.37 if a 1.5-m deep water table is assumed, and 0.10 to 0.14 if a 5-m deep water table is assumed. Liquefaction probabilities of the other surficial geologic units are less than 0.05. Probabilities for the scenario earthquakes are generally consistent with observations during historical earthquakes.

  18. Ephemeral stream reaches preserve the evolutionary and distributional history of threespine stickleback in the Santa Clara and Ventura River watersheds of southern California

    Science.gov (United States)

    Richmond, Jonathan Q.; Jacobs, David K.; Backlin, Adam R.; Swift, Camm C.; Dellith, Chris; Fisher, Robert N.

    2015-01-01

    Much remains to be understood about the evolutionary history and contemporary landscape genetics of unarmored threespine stickleback in southern California, where populations collectively referred to as Gasterosteus aculeatus williamsoni have severely declined over the past 70+ years and are now endangered. We used mitochondrial sequence and microsatellite data to assess the population genetics and phylogeography of unarmored populations sampled immediately downstream from the type locality of G. a. williamsoni in the upper Santa Clara River, and assessed their distinctiveness with respect to low-armor populations in the downstream sections of the river and the adjacent Ventura River. We also characterized the geographic limits of different plate morphs and evaluated the congruence of those boundaries with barriers to dispersal in both river systems and to neutral genetic variation. We show substantial population structuring within the upper reach of the Santa Clara River, but little partitioning between the lower Santa Clara and Ventura Rivers—we attribute these patterns to different ancestry between spatially subdivided populations within the same drainage, a predominance of downstream gene flow, and ability for coastal dispersal between the Santa Clara and Ventura Rivers. We also show that alleles from introduced low-plate stock have infiltrated a native population in at least one upper Santa Clara River tributary, causing this formerly unarmored population to become gradually low-plated over a 30 + year time period. Measures of genetic diversity, census surveys, and severe habitat disturbance all indicate that unarmored stickleback near the type locality are currently at high risk of extinction.

  19. ANALISIS PENGARUH THE BIG FIVE PERSONALITY TERHADAP ORGANIZATIONAL CITIZENSHIP BEHAVIOR (OCB DAN KINERJA PERAWAT DI RS SANTA CLARA MADIUN

    Directory of Open Access Journals (Sweden)

    Desi Natalia Soepono

    2017-04-01

    Full Text Available Nurse performance shows the magnitude of the contribution made by nurses to hospital and reflects the performance of a hospital because patient will often relates and meets the nurse. One factor that affect the nurses performance is organizational citizenship behavior (OCB. OCB is extra-role behavior that nurses are willing to do tasks outside of their job discription and the big five personality is one of the factors that significantly influence the OCB. This study aims to examine the direct and indirect influence of the big five personality to the performance of nurses at Santa Clara Madiun Hospital through OCB as intervening variable. The sampel of this research were all nurses at Santa Clara Madiun Hospital. Data collection instruments using questionnaires. Data analysis techniques in this study included descriptive statistics, test data quality, classical assumption, hierarchical regression analysis, and path analysis using SPSS 17.0. The result showed that the big five personality significant positive effect on nurses performance, the big five personality significant positive effect on OCB, and OCB significant positive effect on the nurses performance. OCB has a full mediation effect to influence of the big five personality to the nurses performance

  20. Escribir para resistir la Soledad: Nostalgia, confesión y amor en cartas a Clara de Juan Rulfo

    Directory of Open Access Journals (Sweden)

    Carlos Julio Ayram Chede

    2013-01-01

    Full Text Available El presente artículo indaga en el conjunto de cartas que el escritor mexicano Juan Rulfo le escribe a Clara Aparicio entre los años 1944 y 1950 las cuales no solo representan un hecho poé- tico en sí mismo, sino que develan al menos tres estados que se conjugan y coexisten en el plano de la expresión de cada misiva: la nostalgia, la confesión y el amor. Por tanto, cada una de las cartas que escribe Rulfo le permite asegurar un lugar en el mundo que empieza a habitar desde la lejanía de su hogar y que comparte de manera permanente con Clara. Juan Rulfo se sustrae de la lógica de la cotidianidad para evaporar la rutinización de su vida en la escritura, podría afirmarse, que como San Juan de la Cruz o Gustavo Adolfo Bécquer, Rulfo se evade en la escritura como oportunidad para albergar un mundo incondicional donde existe él y su corazón, donde existe el sujeto que ama.

  1. De Palacio a Monasterio. Génesis y transformación del Real Monasterio de Santa Clara de Sevilla

    Directory of Open Access Journals (Sweden)

    Oliva Muñoz, Pablo

    2011-12-01

    Full Text Available The convent of Santa Clara is one of the largest religious buildings in Seville. Founded in 1289, it became the oldest second one in the city after that of San Clemente, which is located in the same northwestern area of the old Almohad wall. The comprehensive study of the building, as part of the rehabilitation project, has allowed knowing its evolution and the survival of structures previous to the granting of the land where it is sited.El convento de Santa Clara es uno de los edificios de carácter religioso más grandes de Sevilla. Fundado en 1289 se convierte en el segundo más antiguo de la ciudad tan sólo precedido por el de San Clemente que se ubica en el mismo sector del extremo Noroeste de la antigua cerca almohade. El estudio integral del edificio como parte del proyecto de rehabilitación nos ha permitido conocer su evolución y la pervivencia de estructuras heredadas previas a la concesión de los terrenos que ahora ocupa.

  2. Elevation of susceptibility to ozone-induced acute tracheobronchial injury in transgenic mice deficient in Clara cell secretory protein

    International Nuclear Information System (INIS)

    Plopper, C.G.; Mango, G.W.; Hatch, G.E.; Wong, V.J.; Toskala, E.; Reynolds, S.D.; Tarkington, B.K.; Stripp, B.R.

    2006-01-01

    Increases in Clara cell abundance or cellular expression of Clara cell secretory protein (CCSP) may cause increased tolerance of the lung to acute oxidant injury by repeated exposure to ozone (O 3 ). This study defines how disruption of the gene for CCSP synthesis affects the susceptibility of tracheobronchial epithelium to acute oxidant injury. Mice homozygous for a null allele of the CCSP gene (CCSP-/-) and wild type (CCSP+/+) littermates were exposed to ozone (0.2 ppm, 8 h; 1 ppm, 8 h) or filtered air. Injury was evaluated by light and scanning electron microscopy, and the abundance of necrotic, ciliated, and nonciliated cells was estimated by morphometry. Proximal and midlevel intrapulmonary airways and terminal bronchioles were evaluated. There was no difference in airway epithelial composition between CCSP+/+ and CCSP-/- mice exposed to filtered air, and exposure to 0.2 ppm ozone caused little injury to the epithelium of both CCSP+/+ and CCSP-/- mice. After exposure to 1.0 ppm ozone, CCSP-/- mice suffered from a greater degree of epithelial injury throughout the airways compared to CCSP+/+ mice. CCSP-/- mice had both ciliated and nonciliated cell injury. Furthermore, lack of CCSP was associated with a shift in airway injury to include proximal airway generations. Therefore, we conclude that CCSP modulates the susceptibility of the epithelium to oxidant-induced injury. Whether this is due to the presence of CCSP on the acellular lining layer surface and/or its intracellular distribution in the secretory cell population needs to be defined

  3. Status and understanding of groundwater quality in the Santa Clara River Valley, 2007-California GAMA Priority Basin Project

    Science.gov (United States)

    Burton, Carmen A.; Montrella, Joseph; Landon, Matthew K.; Belitz, Kenneth

    2011-01-01

    Groundwater quality in the approximately 460-square-mile Santa Clara River Valley study unit was investigated from April through June 2007 as part of the Priority Basin Project of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The GAMA Priority Basin Project is conducted by the U.S. Geological Survey (USGS) in collaboration with the California State Water Resources Control Board and the Lawrence Livermore National Laboratory. The Santa Clara River Valley study unit contains eight groundwater basins located in Ventura and Los Angeles Counties and is within the Transverse and Selected Peninsular Ranges hydrogeologic province. The Santa Clara River Valley study unit was designed to provide a spatially unbiased assessment of the quality of untreated (raw) groundwater in the primary aquifer system. The assessment is based on water-quality and ancillary data collected in 2007 by the USGS from 42 wells on a spatially distributed grid, and on water-quality data from the California Department of Public Health (CDPH) database. The primary aquifer system was defined as that part of the aquifer system corresponding to the perforation intervals of wells listed in the CDPH database for the Santa Clara River Valley study unit. The quality of groundwater in the primary aquifer system may differ from that in shallow or deep water-bearing zones; for example, shallow groundwater may be more vulnerable to surficial contamination. Eleven additional wells were sampled by the USGS to improve understanding of factors affecting water quality.The status assessment of the quality of the groundwater used data from samples analyzed for anthropogenic constituents, such as volatile organic compounds (VOCs) and pesticides, as well as naturally occurring inorganic constituents, such as major ions and trace elements. The status assessment is intended to characterize the quality of untreated groundwater resources in the primary aquifers of the Santa Clara River Valley study unit

  4. La Caja Real de la Villa de Santa Clara (Cuba: análisis histórico-contable (1689-1831

    Directory of Open Access Journals (Sweden)

    Yumaisi González Ochoa

    2017-07-01

    Full Text Available La Villa de Santa Clara en Cuba se fundó el 15 de julio de 1689, con una actividad económica fundamentalmente ganadera, se rigió en el orden administrativo y económico desde su fundación, al igual que las demás villas del país por las leyes u órdenes emitidas por la metrópoli española. Para el gobierno de las rentas reales, España utilizó las Cajas Reales como mecanismos de control y administración de los recursos en cada territorio americano bajo su dominio. La Caja Real de la Villa de Santa Clara se encontraba subordinada a la Caja Real Principal de la Habana, en la capital del país. A partir de la revisión de las Actas Capitulares del Cabildo de Santa Clara y los libros de cuentas conservados en el Archivo Nacional de Cuba, se explica el proceder de los administradores de los distintos ingresos y gastos de la Caja Real de la Villa de Santa Clara, así como la aplicación del método por cargo y data empleado para el registro de las operaciones y la interrelación entre los libros Manual, Mayor y de Caja del año 1831, y el uso de otros Libros Auxiliares.   Santa Clara village in Cuba was founded on July 15, 1689, with a primarily livestock economic activity, was governed at the administrative and economic order since its foundation, like other towns of the country by laws or orders issued by the Spanish metropolis. For the government in real incomes, Spain used the Cajas Reales as control mechanisms and management of resources in every American territory under its domain. The Caja Real of Santa Clara village was subordinated to the principal Caja Real in Havana, capital of the country. From the review of the Chapter Acts of the Cabildo of Santa Clara and accounting books preserved in the National Archives of Cuba, it's possible explain the proceeding of managers of the various revenue and expenditure of the Caja Real of Santa Clara village and the application of method of charge and discharge employed to register transactions

  5. Estudio de foco de paragonimosis en Fuente Clara, Robledo, área periurbana de Medellín, Antioquia

    Directory of Open Access Journals (Sweden)

    Luz Elena Velásquez

    2008-09-01

    Full Text Available Introducción. La información sobre paragonimosis humana en Colombia llevó a suponer que los focos de la enfermedad estaban localizados en sectores selváticos; sin embargo, durante 2005 se hallaron cangrejos infectados con Paragonimus sp. en Fuente Clara, zona urbana de Medellín. Esto motivó la investigación. Objetivo. Realizar un estudio ecoepidemiológico de la paragonimosis con la participación de la comunidad para promover un manejo adecuado de los ecosistemas acuáticos. Materiales y métodos. Se realizó búsqueda de huéspedes silvestres y humanos de Paragonimus sp. en Fuente Clara. La presencia de formas larvarias y gusanos adultos del digéneo se evaluó en moluscos, crustáceos y mamíferos. En las personas voluntarias se hizo diagnóstico en esputo. Al agua de la quebrada La Puerta se le midieron: coliformes totales/ fecales, pH, conductividad y oxígeno disuelto. Con niños y adolescentes se realizaron talleres educativos utilizando técnicas lúdicas. Resultados. Los porcentajes de infección encontrados fueron: caracoles, 0,07%; cangrejos, 55,5%; mamíferos, 25%, y personas, 0%. Durante los talleres educativos se manifestó la importancia de los recursos naturales del barrio. Los niños identificaron los huéspedes de Paragonimus sp. y detectaron los factores de riesgo para adquirir la enfermedad. Se determinó que el agua de la quebrada La Puerta no es apta para el consumo y la recreación de las personas. Conclusiones. Se señala a Fuente Clara como el primer foco de paragonimosis en zona urbana de Colombia, donde la manipulación y el consumo de cangrejos ponen en riesgo de adquirir la infección a sus habitantes; se sugiere realizar vigilancia de la enfermedad en el sector.

  6. Deformation from the 1989 Loma Prieta earthquake near the southwest margin of the Santa Clara Valley, California

    Science.gov (United States)

    Schmidt, Kevin M.; Ellen, Stephen D.; Peterson, David M.

    2014-01-01

    Damage to pavement and near-surface utility pipes, caused by the 17 October 1989, Loma Prieta earthquake, provides evidence for ground deformation in a 663 km2 area near the southwest margin of the Santa Clara Valley, California (USA). A total of 1427 damage sites, collected from more than 30 sources, are concentrated in four zones, three of which lie near previously mapped faults. In one of these zones, the channel lining of Los Gatos Creek, a 2-km-long concrete strip trending perpendicular to regional geologic structure, was broken by thrusts that were concentrated in two belts, each several tens of meters wide, separated by more than 300 m of relatively undeformed concrete.

  7. Increased Expression of FoxM1 Transcription Factor in Respiratory Epithelium Inhibits Lung Sacculation and Causes Clara Cell Hyperplasia

    Science.gov (United States)

    Wang, I-Ching; Zhang, Yufang; Snyder, Jonathan; Sutherland, Mardi J.; Burhans, Michael S.; Shannon, John M.; Park, Hyun Jung; Whitsett, Jeffrey A.; Kalinichenko, Vladimir V.

    2010-01-01

    Foxm1 is a member of the Forkhead Box (Fox) family of transcription factors. Foxm1 (previously called Foxm1b, HFH-11B, Trident, Win, or MPP2) is expressed in multiple cell types and plays important roles in cellular proliferation, differentiation and tumorigenesis. Genetic deletion of Foxm1 from mouse respiratory epithelium during initial stages of lung development inhibits lung maturation and causes respiratory failure after birth. However, the role of Foxm1 during postnatal lung morphogenesis remains unknown. In the present study, Foxm1 expression was detected in epithelial cells of conducting and peripheral airways and changing dynamically with lung maturation. To discern the biological role of Foxm1 in the prenatal and postnatal lung, a novel transgenic mouse line that expresses a constitutively active form of FoxM1 (FoxM1 N-terminal deletion mutant or FoxM1-ΔN) under the control of lung epithelial-specific SPC promoter was produced. Expression of the FoxM1-ΔN transgene during embryogenesis caused epithelial hyperplasia, inhibited lung sacculation and expression of the type II epithelial marker, pro-SPC. Expression of FoxM1-ΔN mutant during the postnatal period did not influence alveologenesis but caused focal airway hyperplasia and increased proliferation of Clara cells. Likewise, expression of FoxM1-ΔN mutant in conducting airways with Scgb1a1 promoter was sufficient to induce Clara cell hyperplasia. Furthermore, FoxM1-ΔN cooperated with activated K-Ras to induce lung tumor growth in vivo. Increased activity of Foxm1 altered lung sacculation, induced proliferation in the respiratory epithelium and accelerated lung tumor growth, indicating that precise regulation of Foxm1 is critical for normal lung morphogenesis and development of lung cancer. PMID:20816795

  8. Seroprevalencia de babesiosis bovina en la hacienda Vegas de la Clara, Gómez Plata (Antioquia, 2008

    Directory of Open Access Journals (Sweden)

    Richard Zapata Salas

    2011-06-01

    Full Text Available La babesiosis es una enfermedad del ganado bovino transmitida por la garrapata Rhipicephalus (Boophilus microplus y causada por los parásitos protozoarios Babesia bovis y B. bigemina. Una zona se considera epizootiológicamente estable frente a Babesia spp, cuando el 75% de los bovinos entre las edades de 3 a 9 meses son serorreactivos (IgG frente a Babesia bovis y Babesia bigemina y no hay evidencia de signos clínicos. El objetivo de esta investigación fue determinar la seroprevalencia de Babesia bovis y Babesia bigemina en el ganado bovino de la hacienda Vegas de la Clara (Universidad de Antioquia, Gómez Plata, Antioquia, por medio de inmunofluorescencia indirecta. Se diseñó un estudio descriptivo prospectivo con análisis de corte transversal. Fue evaluada toda la población bovina de la hacienda Vegas de la Clara (n = 118. Las muestras fueron evaluadas por inmunofluorescencia indirecta para la detección de anticuerpos tipo IgG específicos contra Babesia bovis y B. bigemina. La serorreactividad obtenida en los bovinos evaluados, para al menos una especie de Babesia fue del 89,8%, para Babesia bovis del 83,8%, mientras que para B. bigemina del 61%. Se obtuvo una relación estadísticamente significativa entre la serorreactividad para B. bigemina y la frecuencia del tratamiento garrapaticida. La serorreactividad indica estabilidad enzoótica en el hato para B. bovis, mientras que para B. bigemina se encontró que la frecuencia del tratamiento garrapaticida interrumpe su ciclo de transmisión.

  9. New set of convective heat transfer coefficients established for pools and validated against CLARA experiments for application to corium pools

    Energy Technology Data Exchange (ETDEWEB)

    Michel, B., E-mail: benedicte.michel@irsn.fr

    2015-05-15

    Highlights: • A new set of 2D convective heat transfer correlations is proposed. • It takes into account different horizontal and lateral superficial velocities. • It is based on previously established correlations. • It is validated against recent CLARA experiments. • It has to be implemented in a 0D MCCI (molten core concrete interaction) code. - Abstract: During an hypothetical Pressurized Water Reactor (PWR) or Boiling Water Reactor (BWR) severe accident with core meltdown and vessel failure, corium would fall directly on the concrete reactor pit basemat if no water is present. The high temperature of the corium pool maintained by the residual power would lead to the erosion of the concrete walls and basemat of this reactor pit. The thermal decomposition of concrete will lead to the release of a significant amount of gases that will modify the corium pool thermal hydraulics. In particular, it will affect heat transfers between the corium pool and the concrete which determine the reactor pit ablation kinetics. A new set of convective heat transfer coefficients in a pool with different lateral and horizontal superficial gas velocities is modeled and validated against the recent CLARA experimental program. 155 tests of this program, in two size configurations and a high range of investigated viscosity, have been used to validate the model. Then, a method to define different lateral and horizontal superficial gas velocities in a 0D code is proposed together with a discussion about the possible viscosity in the reactor case when the pool is semi-solid. This model is going to be implemented in the 0D ASTEC/MEDICIS code in order to determine the impact of the convective heat transfer in the concrete ablation by corium.

  10. Characterization of particle-induced Clara cell hyperplasia in rat lungs; Charakterisierung der Partikel-induzierten Clarazell-Hyperplasie in der Rattenlunge

    Energy Technology Data Exchange (ETDEWEB)

    Albrecht, C.; Adolf, B.; Weishaupt, C.; Hoehr, D.; Zeittraeger, I.; Borm, P.J.A. [Heinrich-Heine Univ., Duesseldorf (Germany). Medizinisches Inst. fuer Umwelthygiene; Friemann, J. [Unfallkrankenhaus Berlin (Germany). Inst. fuer Pathologie

    2001-10-01

    The aim of this study was to examine Clara cells after particle exposure by in situ hybridization as well as to characterize cell proliferation and function in xenobiotic metabolism. Female Wistar rats were intratracheally instilled with coal dust samples of variable quartz content, quartz (DQ12), Titanium dioxide, or saline solution containing 0.5% Tween 80. After 126-129 weeks, all particle-exposed animals developed Clara cell hyperplasia i.e. up to 0.48% of the total lung area which was significantly increased compared to Titanium dioxide and control animals. Our data also showed proliferation and hyperplasia of bronchiolar Clara cells by coal dusts independent of their quartz content. The lack of proliferating cell nuclear antigen staining in most of the hyperplastic Clara cells suggests that following damage of alveolar epithelial cells, Clara cells migrate in and remodulate the alveolar epithelium. After the migration they keep their function in the xenobiotic metabolism as shown by expansion of CYP2E1 active Clara cells. The minor development of Clara cell hyperplasia in Titanium dioxide treated rats indicates that this is not a general particle effect, and possibly due to its lower toxicity to epithelial cells. (orig.) [German] Ziel dieser Studie war die Untersuchung der Clarazellen nach Partikelexposition mittels in situ Hybridisierung sowie die Charakterisierung hinsichtlich Zellproliferation und Funktion im xenobiotischen Stoffwechsel. Weibliche Wistar-Ratten wurden intratracheal mit Kohlenstaeuben unterschiedlichen Quarzgehaltes, Quarz DQ12, Titandioxide oder physiologischer Kochsalzloesung mit einem Gehalt von 0,5% Tween 80 instilliert. Die 126-129 Wochen nach der intratrachealen Instillation mit schwerloeslichen Partikeln obduzierten Tiere wiesen alle eine Clarazellhyperplasie in bis zu 0,48% des gesamten Lungengewebes auf, die gegenueber den Titandioxid-behandelten und den Kontrolltieren statistisch signifikant war. Die Clarazellproliferation und

  11. Modelos de perfil de velocidad para evaluación de consistencia del trazado en carreteras de la provincia de Villa Clara, Cuba Speed profile models for evaluation of design consistency in road of the province of Villa Clara, Cuba

    Directory of Open Access Journals (Sweden)

    René A. García Depestre

    2012-08-01

    Full Text Available Entre los aspectos relativos a la carretera que influyen en la accidentalidad, tiene un gran peso el diseño geométrico, internacionalmente el método más empleado para la evaluación del diseño es a partir de la consistencia del trazado con modelos de perfil de velocidades de operación. Cuba no cuenta con modelos propios que consideren las características de las carreteras y los conductores, por lo que es necesario desarrollar modelos de predicción de velocidades para la evaluación de la consistencia del trazado. El desarrollo de modelos de predicción del perfil de velocidades de operación para diferentes condiciones de alineación en carreteras rurales de dos carriles en el contexto de Cuba, se efectúa a partir de características geométricas y velocidades puntuales, con análisis estadístico de las principales variables que relacionan la velocidad con el diseño. Una vez desarrollados los modelos, se aplican a un tramo de carretera declarado como tramo de concentración de accidentes (TCA de la provincia de Villa Clara localizada en la región central de Cuba, los resultados obtenidos confirman la validez de los modelos desarrollados para determinar los perfiles de velocidad de operación y de esta forma, evaluar la consistencia del trazado, con el objetivo de detectar los lugares de mayores dificultades con relación al trazado.Among the aspects that influence road accidents, geometric design is the most relevant. The most used method for evaluating the design all over the world is based on the design consistency with speed profile models of operation. Cuba does not have proprietary models that consider the characteristics of the roads and drivers, so it is necessary to develop predictive models for the evaluation of design consistency. The development of operating speed profile prediction models for different alignment conditions on rural roads with two lanes in the context of Cuba is made from the geometric characteristics and

  12. El sistema lacustre de la Formación Mollar en el depocentro triásico de Santa Clara (provincia de Mendoza, Argentina The lacustrine system of the Mollar Formation in the Triassic Santa Clara Depocenter (Mendoza Province, Argentina

    Directory of Open Access Journals (Sweden)

    Luis A Spalletti

    2009-07-01

    Full Text Available El depocentro triásico de Santa Clara, Cuenca Cuyana, se caracteriza por espesos depósitos generados en ambiente lacustre. Uno de ellos, con un registro de más de 345 m, corresponde a la Formación Mollar. El tramo inferior a medio está caracterizado por una monótona sucesión de lutitas bituminosas acumuladas por decantación suspensiva en el 'off shore' anóxico de un cuerpo lacustre hidrológicamente cerrado y que muestra alto contenido de materia orgánica amorfa de origen algal y de restos de plantas terrestres muy degradadas junto a sulfuros de hierro autígenos. Intercalan areniscas finas debidas a corrientes de turbidez diluidas y carbonatas estromatolíticos. En esta sucesión se definen ciclos granocrecientes de pequeña escala (PACs que se atribuyen a episodios de expansión-retracción lacustre controlados por cambios climáticos. Asociaciones de facies heterolíticas representan los depósitos de la transición entre los ambientes de 'nearshore' y 'offshore' lacustre. La sección superior de la Formación Mollar se compone de sucesiones pelíticas con profusa bioturbación que sugieren mayor oxigenación del sustrato y se asignan a ambiente de costa afuera de un sistema lacustre holomíctico hidrológicamente abierto. Intercalan areniscas producto de flujos hiperpicnales. Depósitos de areniscas con abundantes trazas fósiles y estructuras de olas y flujos unidireccionales, representan a sectores marginales del ambiente lacustre. Además de los ciclos de alta frecuencia, en la Formación Mollar se definen tres secuencias asimétricas de mayor escala atribuidas a episodios mayores de expansión-contracción lacustre debidos a la interacción entre factores climáticos y tectónicos. El diseño de superposición granocreciente de la Formación Mollar y la gradual transición a depósitos fluviales de la sobreyacente Formación Montaña refleja asimismo una constante reducción del espacio de acomodación sedimentaria en el

  13. CLARA-SAL: a global 28 yr timeseries of Earth's black-sky surface albedo

    Directory of Open Access Journals (Sweden)

    A. Riihelä

    2013-04-01

    Full Text Available We present a novel 28 yr dataset of Earth's black-sky surface albedo, derived from AVHRR instruments. The dataset is created using algorithms to separately derive the surface albedo for different land use areas globally. Snow, sea ice, open water and vegetation are all treated independently. The product features corrections for the atmospheric effect in satellite-observed surface radiances, a BRDF correction for the anisotropic reflectance properties of natural surfaces, and a novel topography correction of geolocation and radiometric accuracy of surface reflectance observations over mountainous areas. The dataset is based on a homogenized AVHRR radiance timeseries. The product is validated against quality-controlled in situ observations of clear-sky surface albedo at various BSRN sites around the world. Snow and ice albedo retrieval validation is given particular attention using BSRN sites over Antarctica, Greenland Climate Network stations on the Greenland Ice Sheet (GrIS, as well as sea ice albedo data from the SHEBA and Tara expeditions. The product quality is found to be comparable to other previous long-term surface albedo datasets from AVHRR.

  14. EVALUATION OF THE RESIZING OF THE WASTE TREATMENT PLANT OF THE TEXTILE COMPANY "DESEMBARCO DEL GRANMA", SANTA CLARA

    Directory of Open Access Journals (Sweden)

    Isabel Cabrera Estrada

    2015-10-01

    Full Text Available The increase of the sewage is a serious global problem. The objective of this work is to make an technical, economic and environmental evaluation of the resizing of the plant for the treatment of waste water from the textile company "Desembarco del Granma", in Santa Clara and to offer a proposal to improve the functioning of the same company, specifically with its process of biological treatment using activated sludge. As a preliminary step, using experimental techniques, the characteristics of the tributary and the effluent from the system were evaluated. COD values higher than 90 mg/L showed adverse implications for the body receiver and an apparent inability of the system to remove organic matter to the levels required. The recalculation of the parameters of design/operation of the plant for the current conditions of the tributary was made. It is obtained that these parameters are not within the recommended values and finally, it was proposed and evaluated the increased to 50 and 75 % of the volume of the aeration tank and the commissioning of two or three of the air vents. With the expansion of the plant's capacity will be achieve a treatment that allows the effluent meet established standards for dumping and therefore avoids damage to the environment and the payment of fines for these concepts. The economic indicators NPV, IRR and PBP calculated, demonstrate the acceptability of the investment required to implement the modifications. All this together proves that the project is deployable.

  15. Radionuclide and heavy metal concentrations in soil, vegetation, and fish collected around and within Tsicoma Lake in Santa Clara Canyon

    International Nuclear Information System (INIS)

    Fresquez, P.R.; Armstrong, D.R.; Naranjo, L. Jr.

    1996-03-01

    Radionuclide ( 3 H, 90 Sr, 137 Cs, 238 Pu, 239 Pu, total U) and heavy metal (Ag, As, Ba, Be, Cd, Cr, Hg, Ni, Pb, Sb, Se, Tl) contents were determined in soil, vegetation (overstory and understory), and fish (rainbow trout) collected around and within Tsicoma Lake in Santa Clara Canyon in 1995. All heavy metal and most radionuclide contents around or within the lake, except for U in soil, vegetation, and fish, were within or just above upper limit background. Detectable levels (where the analytical result was greater than two times counting uncertainty) of U in soils, vegetation, and fish were found in slightly higher concentrations than in background samples. Overall, however, maximum total committed effective dose equivalent (CEDE)(95% confidence level)--based on consumption of 46 lb of fish--from Tsicoma Lake (0.066 mrem/y) was within the maximum total CEDE from the ingestion of fish from the Mescalero National Fish Hatchery (background)(0.113 mrem/y)

  16. Caracterización del proceso de formación de valores en los taekwondocas de Villa Clara

    Directory of Open Access Journals (Sweden)

    María T. González Abreu Mendoza

    2007-09-01

    Full Text Available Actualmente los problemas relacionados con la educación de las futuras generaciones cobran mayor interés; no se circunscriben solamente al campo teórico, si no que abordan también aquellos aspectos de orden práctico como una forma de responder a los necesidades sociales que reclaman a un hombre integralmente formado en la lucha por colocarse a la altura de los requerimientos del mundo contemporáneo. Por este motivo la necesidad de una personalidad moral, es enfrentada como un ejercicio necesario que no puede separase de las aspiraciones sociales por lo que debe concretarse en cada una de sus esferas, lo que llama a la reflexión con posiciones teóricas y a la intervención pedagógica. A esta necesidad en la esfera deportiva recurre el proyecto ramal sobre la formación de valores de los deportistas cubanos en el alto rendimiento. El presente informe se propone caracterizar el proceso de educación en valores de los taekwondokas del alto rendimiento de Villa Clara. Los métodos y técnicas aplicadas posibilitaron precisar la escala de valores que moviliza las actuaciones de los atletas, los motivos que operan en este sentido y las necesidades más acuciantes que en el orden educativo poseen.

  17. Performance of molten carbonate fuel cells with the electrolyte molded at low pressure (IV). Analysis of performance decay factors in MCFC stack

    Energy Technology Data Exchange (ETDEWEB)

    Sonai, Atuo; Ozu, Hideyuki; Murata, Kenji; Shirogami, Tamotsu; Watanabe, Takao; Izaki, Yoshiyuki; Horiuchi, Nagayuki

    1987-09-01

    A 1500-h performance test on a 30 x 30 cm cell stack of 10 molten carbonate fuel cells was performed to evaluate the durability of the stack. Beyond 1000 h, decay of its performance was observed. The result of the study for the cause of the decay is reported. The structures of the single cell and stack are introduced. The effective area of the electrode is 530 m/sup 2/. After 1020 h use, the output voltage decreased. Analysis of the cell characteristics and post-test analysis were performed to study the cause of the decrease. It was found that the main cause for the voltage loss would be the occurrence of slight short circuiting between the edge-seal areas via a corrosion product. However, little transfer of lithium and potassium ions was observed through the manifold seal which had been regarded as the main cause for the decay of stacked cells. It was assumed that this was due to the employment of a sealing material which contained glass of low manifold ion conductivity. (10 figs, 4 refs)

  18. Application of seismic refraction tomography for tunnel design in Santa Clara Mountain, San Juan, Argentina Application of seismic refraction tomography for tunnel design in Santa Clara Mountain, San Juan, Argentina

    Directory of Open Access Journals (Sweden)

    Imhof Armando Luis

    2011-12-01

    Full Text Available

    A geophysical survey involving seismic refraction tomography (SRT for mapping 'P' waves was carried out in Sierra Santa Clara, San Juan Province, Argentina in July 2009. The purpose of the geophysical survey was to determine the degree of fracturing and the rigidity of the rock mass through which it is planned to build a 290 m long road tunnel traversing the mountain almost perpendicular to the axis thereof, at around 100 m depth from the summit.

    Several difficulties arose from the operational point of view which made it almost impossible to conduct fieldwork in normal circumstances. Firstly, the topography had almost 45° slopes and 100 m research depths which would have involved having had to use explosives to generate seismic waves reaching sensors which had sufficient signal-to-noise ratio for distinguishing them. Legal restrictions regarding the use of explosives on the one hand and insufficient power when using hammer blows on the other made it necessary to design and build a gas-powered gun to achieve the minimum energy (2 kJ required for detecting seismic signals.

    Secondly, using conventional interpretation methods involving layered models was inoperable in such geological structures; seismic tomography methods were thus used which make use of the velocity gradient concept (both lateral and in-depth. This allowed mapping subsurface velocity variations in the form of velocity contour lines.

    The methodology used with the new seismic waves' source generator, as well as SRT application in this type of geological structure, demonstrated that satisfactory results could be obtained for this kind of geophysical study for geotechnical purposes.

    A geophysical survey involving seismic refraction tomography (SRT for mapping 'P' waves was

  19. Variações temporais na passagem de peixes pelo elevador da Usina Hidrelétrica de Santa Clara, rio Mucuri, leste brasileiro Temporal patterns of fish passage in Santa Clara Power Plant's fish lift, Mucuri River, east Brazil

    Directory of Open Access Journals (Sweden)

    Paulo dos S. Pompeu

    2006-06-01

    Full Text Available O presente estudo teve como objetivo determinar padrões temporais na passagem de peixes pelo elevador da Usina Hidrelétrica de Santa, localizado no rio Mucuri. Durante quatro meses, de novembro de 2003 a março de 2004, foram realizados ciclos de transposição a cada duas horas, quando todos os indivíduos foram contados e identificados. Durante este período foram transpostos 67.838 indivíduos de 31 espécies. A abundância de Characiformes migradores no elevador foi maior no período diurno, enquanto Siluriformes foram observados em maior quantidade à noite. A abundância de peixes no elevador foi relacionada significativamente com as vazões no rio Mucuri. O padrão encontrado torna possível a melhor utilização do elevador, priorizando sua operação durante o dia e em períodos de maior vazão.The current study had the objective of determining temporal patterns of fish passage in Santa Clara Power Plant's fish lift, Mucuri River. During four months, from November 2003 to March 2004, transposition cycles were performed each two hours, when the specimens were counted and identified. During this migration period 67,838 individuals of 31 species passed through the lift. Migratory Characiformes abundance was larger during the day, whereas the Siluriformes were registered mainly at night. Fish abundance in the lift was significantly related to the Mucuri river flow. The temporal pattern found makes possible a better utilization of the lift, focusing cycles during the day and high flows periods.

  20. Un peu de désordre n'est pas du tout désagréable Clara Gaspar se passionne pour son métier au CERN, sans jamais oublier son Portugal

    CERN Multimedia

    Imhof, Michel

    2002-01-01

    Clara Gaspar is passionately fond of her job at CERN and enjoys the enrichment of life being in an international community. She misses some things and will never forget Portugal but counts Geneva as her home (2 pagees)

  1. Propuesta\tde Acciones Físicas Recreativas para\tlos los pacientes aquejados de xeroderma pigmentario “Xp” en el Municipio Santa Clara

    Directory of Open Access Journals (Sweden)

    María Josefa Alfonso Guirado

    2009-06-01

    Full Text Available La atención a grupos con necesidades educativas especiales constituye un logro de la revolución cubana que empeña grandes esfuerzos para elevar la calidad de vida de estos sectores de la población. . En este caso se encuentran los pacientes afectados por el Xeroderma Pigmentario (XP que es una enfermedad genética provocada por la excesiva sensibilidad a los efectos de las radiaciones ultravioletas cuyas características principales son la presencia de manchas en forma de pecas, así como por oscurecimiento y la resequedad de la piel. Los pacientes pertenecientes al municipio de Santa Clara constituyen la población de la presente investigación que tiene como objetivos: diagnosticar el nivel de participación de los pacientes XP del municipio de Santa Clara en las actividades de la recreación física, diseñar un plan de acciones físico – recreativas para estimular la participación de los pacientes XP del municipio de Santa Clara en las actividades de recreación física y valorar el plan de acciones físico – recreativas a través del criterio de especialistas, para dar solución al siguiente problema científico: ¿Cómo incrementar la participación de los pacientes aquejados de Xeroderma Pigmentario del municipio de Santa Clara en las actividades de recreación física? La base metodológica material utilizada para dar cumplimiento a los objetivos de la investigación está constituida por los siguientes métodos, se utilizo del nivel teórico el estudio de documentos y del nivel empírico-experimental: la encuesta, la entrevista y el criterio de especialistas. El proceso investigativo permitió conocer los motivos por los cuales los pacientes XP del municipio de Santa Clara no participan frecuentemente en las actividades de la recreación física y corroboró que los mismos presentan un marcado interés por las actividades recreativas de carácter físico.

  2. ORTHOIMAGERY, Santa Clara, CA

    Data.gov (United States)

    Federal Emergency Management Agency, Department of Homeland Security — Digital orthographic imagery datasets contain georeferenced images of the Earth's surface, collected by a sensor in which object displacement has been removed for...

  3. Santa Clara County, California

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — LAS format files, raw LiDAR data in its native format, classified bare-earth LiDAR DEM and photogrammetrically derived breaklines generated from LiDAR Intensity...

  4. California GAMA Program: Sources and transport of nitrate in shallow groundwater in the Llagas Basin of Santa Clara County, California

    International Nuclear Information System (INIS)

    Moran, J E; McNab, W; Esser, B; Hudson, G; Carle, S; Beller, H; Kane, S; Tompson, A B; Letain, T; Moore, K; Eaton, G; Leif, R; Moody-Bartel, C; Singleton, M

    2005-01-01

    A critical component of the State Water Resource Control Board's Groundwater Ambient Monitoring and Assessment (GAMA) Program is to assess the major threats to groundwater resources that supply drinking water to Californians (Belitz et al., 2004). Nitrate is the most pervasive and intractable contaminant in California groundwater and is the focus of special studies under the GAMA program. This report presents results of a study of nitrate contamination in the aquifer beneath the cities of Morgan Hill and Gilroy, CA, in the Llagas Subbasin of Santa Clara County, where high nitrate levels affect several hundred private domestic wells. The main objectives of the study are: (1) to identify the main source(s) of nitrate that issue a flux to the shallow regional aquifer (2) to determine whether denitrification plays a role in the fate of nitrate in the subbasin and (3) to assess the impact that a nitrate management plan implemented by the local water agency has had on the flux of nitrate to the regional aquifer. Analyses of 56 well water samples for major anions and cations, nitrogen and oxygen isotopes of nitrate, dissolved excess nitrogen, tritium and groundwater age, and trace organic compounds, show that synthetic fertilizer is the most likely source of nitrate in highly contaminated wells, and that denitrification is not a significant process in the fate of nitrate in the subbasin except in the area of recycled water application. In addition to identifying contaminant sources, these methods offer a deeper understanding of how the severity and extent of contamination are affected by hydrogeology and groundwater management practices. In the Llagas subbasin, the nitrate problem is amplified in the shallow aquifer because it is highly vulnerable with high vertical recharge rates and rapid lateral transport, but the deeper aquifers are relatively more protected by laterally extensive aquitards. Artificial recharge delivers low-nitrate water and provides a means of long

  5. Association of serum Clara cell protein CC16 with respiratory infections and immune response to respiratory pathogens in elite athletes.

    Science.gov (United States)

    Kurowski, Marcin; Jurczyk, Janusz; Jarzębska, Marzanna; Moskwa, Sylwia; Makowska, Joanna S; Krysztofiak, Hubert; Kowalski, Marek L

    2014-04-15

    Respiratory epithelium integrity impairment caused by intensive exercise may lead to exercise-induced bronchoconstriction. Clara cell protein (CC16) has anti-inflammatory properties and its serum level reflects changes in epithelium integrity and airway inflammation. This study aimed to investigate serum CC16 in elite athletes and to seek associations of CC16 with asthma or allergy, respiratory tract infections (RTIs) and immune response to respiratory pathogens. The study was performed in 203 Olympic athletes. Control groups comprised 53 healthy subjects and 49 mild allergic asthmatics. Serum levels of CC16 and IgG against respiratory viruses and Mycoplasma pneumoniae were assessed. Allergy questionnaire for athletes was used to determine symptoms and exercise pattern. Current versions of ARIA and GINA guidelines were used when diagnosing allergic rhinitis and asthma, respectively. Asthma was diagnosed in 13.3% athletes, of whom 55.6% had concomitant allergic rhinitis. Allergic rhinitis without asthma was diagnosed in 14.8% of athletes. Mean CC16 concentration was significantly lower in athletes versus healthy controls and mild asthmatics. Athletes reporting frequent RTIs had significantly lower serum CC16 and the risk of frequent RTIs was more than 2-fold higher in athletes with low serum CC16 (defined as equal to or less than 4.99 ng/ml). Athletes had significantly higher anti-adenovirus IgG than healthy controls while only non-atopic athletes had anti-parainfluenza virus IgG significantly lower than controls. In all athletes weak correlation of serum CC16 and anti-parainfluenza virus IgG was present (R = 0.20, p athletes a weak positive correlations of CC16 with IgG specific for respiratory syncytial virus (R = 0.29, p = 0.009), parainfluenza virus (R = 0.31, p = 0.01) and adenovirus (R = 0.27, p = 0.02) were seen as well. Regular high-load exercise is associated with decrease in serum CC16 levels. Athletes with decreased CC16 are

  6. Analysis of seismic waves crossing the Santa Clara Valley using the three-component MUSIQUE array algorithm

    Science.gov (United States)

    Hobiger, Manuel; Cornou, Cécile; Bard, Pierre-Yves; Le Bihan, Nicolas; Imperatori, Walter

    2016-10-01

    We introduce the MUSIQUE algorithm and apply it to seismic wavefield recordings in California. The algorithm is designed to analyse seismic signals recorded by arrays of three-component seismic sensors. It is based on the MUSIC and the quaternion-MUSIC algorithms. In a first step, the MUSIC algorithm is applied in order to estimate the backazimuth and velocity of incident seismic waves and to discriminate between Love and possible Rayleigh waves. In a second step, the polarization parameters of possible Rayleigh waves are analysed using quaternion-MUSIC, distinguishing retrograde and prograde Rayleigh waves and determining their ellipticity. In this study, we apply the MUSIQUE algorithm to seismic wavefield recordings of the San Jose Dense Seismic Array. This array has been installed in 1999 in the Evergreen Basin, a sedimentary basin in the Eastern Santa Clara Valley. The analysis includes 22 regional earthquakes with epicentres between 40 and 600 km distant from the array and covering different backazimuths with respect to the array. The azimuthal distribution and the energy partition of the different surface wave types are analysed. Love waves dominate the wavefield for the vast majority of the events. For close events in the north, the wavefield is dominated by the first harmonic mode of Love waves, for farther events, the fundamental mode dominates. The energy distribution is different for earthquakes occurring northwest and southeast of the array. In both cases, the waves crossing the array are mostly arriving from the respective hemicycle. However, scattered Love waves arriving from the south can be seen for all earthquakes. Combining the information of all events, it is possible to retrieve the Love wave dispersion curves of the fundamental and the first harmonic mode. The particle motion of the fundamental mode of Rayleigh waves is retrograde and for the first harmonic mode, it is prograde. For both modes, we can also retrieve dispersion and ellipticity

  7. Leonor de Sicilia y Santa Clara de Teruel: la fundación reginal de un convento de clarisas y su primer desarrollo

    Directory of Open Access Journals (Sweden)

    Roebert, Sebastian

    2014-06-01

    Full Text Available The history of the monastery of the Poor Clares of Teruel, also known as Santa Catalina or Santa Clara de Teruel, is virtually unknown. One reason for the lack of studies dedicated to this convent is the complete loss of its archive during the Spanish Civil War. The present study intends to reconstruct the foundation and initial development of Santa Clara de Teruel from its beginning in 1367 until the fi rst quarter of the 15th century, using mostly hitherto unknown sources from other archives. Special attention will be paid to the founder of the monastery, Leonor of Sicily (1349-1375, queen of the Crown of Aragon.La historia del monasterio de las clarisas de Teruel, conocido tanto por el nombre de Santa Catalina como por el de Santa Clara de Teruel, nos resulta hasta el día de hoy prácticamente desconocida. Seguramente, este hecho se debe en buena medida a la destrucción completa del archivo conventual durante la Guerra Civil. El presente estudio pretende reconstruir el proceso fundacional y analizar el primer desarrollo del monasterio, desde su creación en el año 1367 hasta el primer cuarto del siglo XV, a través de la documentación que se conserva en otros archivos y que permanece, en su mayor parte, inédita y sin estudiar. Además, se investigará el papel preponderante que desempeñó la fundadora y principal promotora del convento, Leonor de Sicilia (1349-1375, reina de la Corona de Aragón.

  8. Radionuclides and heavy metals in rainbow trout from Tsichomo, Nana Ka, Wen Povi, and Pin De Lakes in Santa Clara Canyon

    Energy Technology Data Exchange (ETDEWEB)

    Fresquez, P.R.; Armstrong, D.R.; Naranjo, L. Jr.

    1998-04-01

    Radionuclide ({sup 3}H, {sup 90}Sr, {sup 137}Cs, {sup 238}Pu, {sup 239}Pu, and total uranium) and heavy metal (Ag, As, Ba, Be, Cd, Cr, Hg, Ni, Pb, Sb, Se, and TI) concentrations were determined in rainbow trout collected from Tsichomo, Nana Ka, Wen Povi, and Pin De lakes in Santa Clara Canyon in 1997. Most radionuclide and heavy metal concentrations in fish collected from these four lakes were within or just above upper limit background concentrations (Abiquiu reservoir), and as a group were statistically (p < 0.05) similar in most parameters to background.

  9. Analysis of the stormwater drainage of the historic walls of Cartagena de Indias between the bastions of San Lucas, Santa Catalina and Santa Clara

    Science.gov (United States)

    Utria, A.; Saba, M.; Quiñones-Bolaños, E.

    2017-12-01

    The city walls of Cartagena between the Baluarte of San Lucas and Santa Clara reflects the consequences of poor stormwater drainage. In the present investigation the current drainage state of this area have been evaluated, assessing its sizing and conditions to be then modelled through SWMM 5 software for return periods of 5, 10, 15 and 20 years respectively. Finally, it has been determined that the physical deterioration of the drainage elements justifies the malfunction of the whole system, therefore cleaning and periodic maintenance of the drainage elements is strongly suggested.

  10. Radionuclides and heavy metals in rainbow trout from Tsichomo, Nana Ka, Wen Povi, and Pin De Lakes in Santa Clara Canyon

    International Nuclear Information System (INIS)

    Fresquez, P.R.; Armstrong, D.R.; Naranjo, L. Jr.

    1998-04-01

    Radionuclide ( 3 H, 90 Sr, 137 Cs, 238 Pu, 239 Pu, and total uranium) and heavy metal (Ag, As, Ba, Be, Cd, Cr, Hg, Ni, Pb, Sb, Se, and TI) concentrations were determined in rainbow trout collected from Tsichomo, Nana Ka, Wen Povi, and Pin De lakes in Santa Clara Canyon in 1997. Most radionuclide and heavy metal concentrations in fish collected from these four lakes were within or just above upper limit background concentrations (Abiquiu reservoir), and as a group were statistically (p < 0.05) similar in most parameters to background

  11. Ground-Water Quality Data in the Santa Clara River Valley Study Unit, 2007: Results from the California GAMA Program

    Science.gov (United States)

    Montrella, Joseph; Belitz, Kenneth

    2009-01-01

    Ground-water quality in the approximately 460-square-mile Santa Clara River Valley study unit (SCRV) was investigated from April to June 2007 as part of the statewide Priority Basin project of the Ground-Water Ambient Monitoring and Assessment (GAMA) Program. The GAMA Priority Basin project was developed in response to the Groundwater Quality Monitoring Act of 2001 and is being conducted by the U.S. Geological Survey (USGS) in cooperation with the California State Water Resources Control Board (SWRCB). The study was designed to provide a spatially unbiased assessment of the quality of raw ground water used for public water supplies within SCRV, and to facilitate a statistically consistent basis for comparing water quality throughout California. Fifty-seven ground-water samples were collected from 53 wells in Ventura and Los Angeles Counties. Forty-two wells were selected using a randomized grid-based method to provide statistical representation of the study area (grid wells). Eleven wells (understanding wells) were selected to further evaluate water chemistry in particular parts of the study area, and four depth-dependent ground-water samples were collected from one of the eleven understanding wells to help understand the relation between water chemistry and depth. The ground-water samples were analyzed for a large number of synthetic organic constituents (volatile organic compounds [VOC], pesticides and pesticide degradates, potential wastewater-indicator compounds, and pharmaceutical compounds), a constituent of special interest (perchlorate), naturally occurring inorganic constituents (nutrients, major and minor ions, and trace elements), radioactive constituents, and microbial constituents. Naturally occurring isotopes (tritium, carbon-13, carbon-14 [abundance], stable isotopes of hydrogen and oxygen in water, stable isotopes of nitrogen and oxygen in nitrate, chlorine-37, and bromine-81), and dissolved noble gases also were measured to help identify the source

  12. Estudio de la resistencia a compresión simple del adobe elaborado con suelos procedentes de Crescencio Valdés, Villa Clara, Cuba

    Directory of Open Access Journals (Sweden)

    Barroso, I. J.

    2008-09-01

    Full Text Available In this article we study the resistance to simple compression of the adobe bricks with building purposes. The study was carried out with various clay soils from Crescencio Valdés village, municipality of Camajuaní, Villa Clara, Cuba. In order to select the best soils to construction we have considered 1 MPa (10 kg/cm2 as minimum resistance to simple compression. So the soils that do not verify that requirement have been improved only by adding sand.En este artículo se estudia la resistencia a compresión simple que presenta el adobe elaborado con diferentes suelos procedentes del pueblo de Crescencio Valdés, situado en el municipio de Camajuaní, Villa Clara, Cuba. Se valora la idoneidad de la utilización de cada suelo estudiado bajo la premisa de alcanzar con el adobe elaborado una resistencia a compresión simple de 1 MPa (10 kg/cm2, ya que dicho adobe será utilizado posteriormente para edificación en dicho pueblo

  13. Status of molten carbonate fuel cell technology development

    Science.gov (United States)

    Parsons, E. L., Jr.; Williams, M. C.; George, T. J.

    The MCFC technology has been identified by the DOE as a promising product for commercialization. Development of the MCFC technology supports the National Energy Strategy. Review of the status of the MCFC technology indicates that the MCFC technology developers are making rapid and significant progress. Manufacturing facility development and extensive testing is occurring. Improvements in performance (power density), lower costs, improved packaging, and scale up to full height are planned. MCFC developers need to continue to be responsive to end-users in potential markets. It will be market demands for the correct product definition which will ultimately determine the character of MCFC power plants. There is a need for continued MCFC product improvement and multiple product development tests.

  14. ANÁLISIS ESPACIAL DE LA MORBIMORTALIDAD DEL CÁNCER DE MAMAY CÉRVIX. VILLA CLARA. CUBA. 2004-2009

    Directory of Open Access Journals (Sweden)

    Norma E. Batista Hernández

    2013-01-01

    Full Text Available Fundamentos: El cáncer de mama y el de cérvix continúan siendo un problema de salud, a pesar de la existencia de programas de prevención y de diagnóstico precoz. Por no existir en nuestra provincia estudios similares, se decidió realizar esta investigación, con el objetivo de identificar conglomerados espaciales y/o espacio-temporales que permitan el análisis de la morbimortalidad por cáncer de mama y cérvix en la provincia Villa Clara. Métodos: Estudio observacional descriptivo, focalizado en la detección de conglomerados espaciales y espacio-temporales de la incidencia y mortalidad del cáncer de mama y cérvix en Villa Clara, utilizando la técnica estadística de exploración espacio-temporal (programa SatScan v .7.01. La muestra abarcó la totalidad de mujeres diagnosticadas durante el año 2004 y de ellas las fallecidas hasta el cierre del año 2009. Resultados: El cáncer de mama mostró concordancia en los resultados tanto espaciales como espacio-temporales con un riesgo de padecer la enfermedad de 1,63 y 1,91 respectivamente, los municipios que conformaron conglomerados significativos se ubicaron hacia el centro y noreste de la provincia, encabezados por Santa Clara, cabecera provincial. El cáncer de cérvix evidenció desde el punto de vista temporal el diagnóstico de 100 casos frente a 68,8 esperados durante los meses de marzo a julio del 2004. El estudio espacio-temporal mostró un conglomerado de incidencia en los municipios ubicados al noreste de la provincia. El riesgo relativo de presentar la enfermedad para las mujeres que vivían en estas zonas fue 3,46 frente a las del resto de la provincia. Conclusiones: Se mostró la presencia de conglomerados estadísticamente significativos tanto espaciales como espacio-temporales en las áreas de mayor riesgo de enfermar por estos cánceres. No hubo conglomerados de muertes y diagnósticos tardíos.

  15. Histochemical, light and electron microscopic study of polonium-210 induced peripheral tumours in hamster lungs -evidence implicating the Clara Cell as the cell of origin

    International Nuclear Information System (INIS)

    Kennedy, A.R.; McGandy, R.B.; Little, J.B.

    1977-01-01

    Peripheral lung tumors induced in Syrian golden hamsters by intratracheally administered polonium-210 ( 210 Po) are similar to the peripheral lung tumours induced in many species by a variety of carcinogens. In addition, they show many of the histopathological features observed in human bronchiolar-alveolar carcinomas. Serial sacrifice studies of hamsters exposed to multiple instillations of 210 Po have been carried our to identify the cell of origin of these tumors. By means of thin, plastic (glycol methacrylate) sections, electron microscopy, and histochemistry, it is concluded that the bronchiolar Clara cell is the probable cell of origin, and that this view is generally compatible with many of the reported cytological characteristics of the human tumor. (author)

  16. Factors of risk for relapse of pulmonary tuberculosis in-patient of the Hospital Santa Clara from Bogota 1992/2000

    International Nuclear Information System (INIS)

    Hidalgo Martinez, Patricia; Awad Garcia, Carlos; Pavia Albor, Jacqueline

    2002-01-01

    Pulmonary tuberculosis relapse is defined as these patients that make recurrence of tuberculosis after complete an adequate treatment, and these patients are again diagnosed bacteriologically with tuberculosis. We tried to identify the risk factors for relapse among adults, through an analytical study of cases and controls, with eighty patients among the tuberculosis programmed of Santa Clara Hospital between 1992-2000 with relapse diagnosis which meet criterion of case and eighty patients which meet criterion of control. We did a bivariate analysis with confidence intervals and univariate calculation with logistic regression analysis to predict the development of relapse for the different variables. Diabetes mellitus, chronic renal failure, silicosis are associated with relapse, but in our study we found another factors which are joined to relapse and we suggest that if we find these factors among tuberculosis patients would indicate the chance of relapse and this would create the necessity of use a larger number of doses of antituberculosis medicaments

  17. Evaluación y modificación del Sistema de Tratamiento de Aguas Residuales de la Planta de Matanza del ITCR en Santa Clara, San Carlos

    OpenAIRE

    Deloya Martínez, Alma

    2006-01-01

    La planta de matanza de ganado vacuno y porcino del ITCR, Sede San Carlos, en Santa Clara, procesa en promedio 23 reses y 11 cerdos por día. El caudal de aguas residuales promedio generado durante el proceso de matanza varió de un máximo de 72 m3/día hasta un mínimo de 12 m3/día. Las aguas residuales son tratadas en un sistema de tratamiento biológico anaerobio, para controlar la contaminación del agua, según el Reglamento de vertido y reúso de aguas residuales. El sistema original consistió ...

  18. Development of a local-scale urban stream assessment method using benthic macroinvertebrates: An example from the Santa Clara Basin, California

    Science.gov (United States)

    Carter, J.L.; Purcell, A.H.; Fend, S.V.; Resh, V.H.

    2009-01-01

    Research that explores the biological response to urbanization on a site-specific scale is necessary for management of urban basins. Recent studies have proposed a method to characterize the biological response of benthic macroinvertebrates along an urban gradient for several climatic regions in the USA. Our study demonstrates how this general framework can be refined and applied on a smaller scale to an urbanized basin, the Santa Clara Basin (surrounding San Jose, California, USA). Eighty-four sampling sites on 14 streams in the Santa Clara Basin were used for assessing local stream conditions. First, an urban index composed of human population density, road density, and urban land cover was used to determine the extent of urbanization upstream from each sampling site. Second, a multimetric biological index was developed to characterize the response of macroinvertebrate assemblages along the urban gradient. The resulting biological index included metrics from 3 ecological categories: taxonomic composition ( Ephemeroptera, Plecoptera, and Trichoptera), functional feeding group (shredder richness), and habit ( clingers). The 90th-quantile regression line was used to define the best available biological conditions along the urban gradient, which we define as the predicted biological potential. This descriptor was then used to determine the relative condition of sites throughout the basin. Hierarchical partitioning of variance revealed that several site-specific variables (dissolved O2 and temperature) were significantly related to a site's deviation from its predicted biological potential. Spatial analysis of each site's deviation from its biological potential indicated geographic heterogeneity in the distribution of impaired sites. The presence and operation of local dams optimize water use, but modify natural flow regimes, which in turn influence stream habitat, dissolved O2, and temperature. Current dissolved O2 and temperature regimes deviate from natural

  19. Diagnóstico mediante técnicas de ultrasonidos del forjado de madera del refectorio del Convento de Santa Clara en Carmona (Sevilla

    Directory of Open Access Journals (Sweden)

    Pérez Gálvez, Filomena

    2004-04-01

    Full Text Available Ultrasonic tests are an effective technique of getting adiagnosis of timber structures in historical buildings. Thistechnique is quite valuable to undertake a restoration job. Anew methodology of analysis and diagnosis of timber roofsthrough this non destructive technique is presented.The aim of this article is to get the state of damage and thebending strenght capacity of the timber roof of the Monasteryof Santa Clara in Carmona (Seville dining´s room by usingthis technology.From the results obtained about the bending strenghtcapacity of the studied beams, it can be affirmed that thetimber roof is not able to support safely enough the new useproposed.Considering the historic and artistic importance of thistimber roof, we propose as a restoration methodology basedon hanging the roof through bolts from a reinforced concreteplatform built-in the perimeter walls. This solutionguarantees that the timber roof does not work, just adjustingthe distance between the bolts.Los métodos de ultrasonidos son una técnica eficaz para eldiagnóstico de elementos estructurales de madera enedificios antiguos. Esta técnica proporciona una gran ayudaa la hora de acometer una obra de rehabilitación. Sepresenta una metodología de análisis y diagnostico deforjados de madera mediante dicha técnica no destructiva.El objetivo de este artículo es obtener el grado de deterioro yla capacidad resistente de la madera del alfarje delrefectorio del Convento de Santa Clara en Carmona (Sevillautilizando la metodología propuesta.Por extrapolación de los resultados obtenidos sobre lacapacidad resistente de las vigas estudiadas se puedeconcluir que el conjunto del forjado no es capaz de soportarcon seguridad suficiente el nuevo uso propuesto.Teniendo en cuenta el valor histórico artístico del alfarje sepropone y aporta como solución de rehabilitación laconsistente en colgar el forjado existente mediante pernos deuna losa de hormigón armado empotrada en los

  20. Programación del riego de la papa en el “Valle del Yabú”, Santa Clara, Cuba.

    Directory of Open Access Journals (Sweden)

    B. Job

    2010-02-01

    Full Text Available The objective of the current research was to study the applied irrigation scheduling of the potato during two crop cycles (2009 -2009/10 in Cooperative No. 2 in the Yabú Valley of Santa Clara. Also to carry out corrections required in order to establish a scientifically based irrigation program. In the first crop cycle it was proven that the timing of irrigation application and the amount of water applied did not meet the technical criteria but was dependant on the decisions taken by persons with practical experience in relation to this activity and the programming of irrigation characterized by the application of small depths of irrigation which did not moisten below 20 cm of soil depth in a way which the irrigation interfered with the cultural and chemical processes and left the soil with a hydric deficit. In both crops tension meter were placed at 20 and 40 soil depth, taking periodic measurement of humidity and daily measurements of soil and balance water, because of this the number of irrigation was reduce during the second crop cycle.El objetivo del presente trabajo, ejecutado durante dos cosechas 2009 y 2009-10 fue estudiar la programación del riego de la papa que se realiza en la Unidad Cooperativa No.2 del “Valle del Yabú” de Santa Clara y realizar correcciones para lograr el establecimiento de una programación de riego científicamente fundamentada. En la primera cosecha, se comprobó que el momento de aplicación del riego y el volumen de agua aportado no obedecían a criterios técnicos, sino que dependían de decisiones empíricas de las personas que se relacionaban con esta actividad y la programación del riego se caracterizaba por aplicar muy pequeñas láminas de agua que no lograban humedecer 20 cm de profundidad de suelo, de modo que, el riego obstaculizaba las labores fitosanitarias y culturales y dejaba el suelo con déficit hídrico. En ambas cosechas, se colocaron tensiómetros a 20 y 40 cm de profundidad del suelo

  1. CLARA and ScienTI Networks: Technology and Information for Knowledge Building in the Latin American Scientific Community

    OpenAIRE

    Rejane Sartori; Roberto Carlos Dos Santos Pacheco

    2006-01-01

    Knowledge-based development produces wealth and opens the frontiers of competitiveness, technological innovation and wealth distribution. In developed countries the process is intrinsically bound to the ability of innovative production and the dynamics of network knowledge construction. Within this process the academic and research communities participate effectively in the dynamics of knowledge and innovation, an environment strongly based on information and communication technology. However...

  2. Utilização do mecanismo de transposição de peixes da Usina Hidrelétrica Santa Clara por camarões (Palaemonidae, bacia do rio Mucuri, Minas Gerais, Brasil Use of Santa Clara Power Plant fish lift by Palaemonidae shrimps, Mucuri River basin, Minas Gerais, Brazil

    Directory of Open Access Journals (Sweden)

    Paulo dos S. Pompeu

    2006-03-01

    Full Text Available Durante a operação do elevador para peixes da Usina Hidrelétrica Santa Clara, de novembro de 2003 a março de 2004, todos os crustáceos palaemonídeos adultos que utilizaram o mecanismo foram contados e o número de jovens estimado. Duas espécies foram registradas: Macrobrachium carcinus (Linnaeus, 1758 e Macrobrachium acanthurus (Wiegmann, 1836. A utilização do mecanismo por adultos foi bastante restrita, com apenas 185 exemplares registrados. Porém, o número de jovens de M. carcinus utilizando o elevador foi estimado em 19.120 indivíduos. Embora o mecanismo avaliado tenha permitido a passagem dos palaemonídeos para montante do barramento, ficou clara a necessidade de novos arranjos estruturais e de manejo específicos para esses animais. Essas ações se referem ao desenvolvimento de estruturas direcionadas para a sua passagem e a adoção de vertimentos programados durante o período reprodutivo para permitir o carreamento de larvas para jusante. Esses dois caminhos representam formas efetivas de manejo, imprescindíveis para a manutenção das populações deste importante componente da biota aquática.During the Santa Clara Power Plant fish lift operation, from November 2003 to March 2004, Palaemonidae adult specimens were counted and identified and estimated juveniles number. Two Palaemonidae species were recorded: Macrobrachium carcinus (Linnaeus, 1758 and Macrobrachium acanthurus (Wiegmann, 1836. The use of the fish lift by adults was restricted, since only 185 individuals were registered. However, the estimated juveniles number was 19,120 individuals. Although existing fish passage systems could be considered as an alternative for Palaemonidae migration, planned spills during the reproductive periods could allow the drift of larvae. Moreover, the constructions of specific structures for upstream migration should be considered as an alternative for the maintenance of this important component of aquatic biota.

  3. Análisis de la seguridad y salud laboral en los aprovechamientos forestales de cortas de claras en España

    Directory of Open Access Journals (Sweden)

    Y. Ambrosio Torrijos

    2001-01-01

    Full Text Available A lo largo de ocho años se han controlado de forma directa un total de 34 explotaciones forestales españolas, correspondientes a cortas de claras de masas de repoblación. Se ha reunido información sobre equipos materiales y humanos, riesgos de accidente y para la salud, pautas de seguridad e incidencias ocurridas a lo largo de más de 2,200 horas de cronometraje de las distintas operaciones de explotación y alrededor de 3,000 horas de presencia en el monte. El estudio pone en evidencia las deficiencias de equipamiento activo y pasivo que tienen los equipos utilizados, poniendo especial relevancia en los trabajos realizados manualmente, en donde la falta de profesionalidad, la forma de retribución y la falta de planes reales de seguridad y salud laboral en los aprovechamientos forestales llevan consigo una alta accidentabilidad. Respecto de los riesgos de salud, se ha incorporado como factores de riesgo importantes en los trabajos manuales, la enfermedad de los dedos blancos, causadas por las vibraciones que transmite la motosierra y la enfermedad de Leyme causada por las garrapatas, ambas consideradas enfermedades profesionales en muchos países de Europa pero que en España no se le reconoce su importancia.

  4. Gestão da Qualidade de Vida dos idosos frequentadores do Centro de Convivência e Apoio ao idoso Casa de Clara

    Directory of Open Access Journals (Sweden)

    Josimeire Querollaine Alves de Sousa

    2015-06-01

    Full Text Available A longevidade populacional é uma realidade cada vez mais presente na sociedade, em que o número de idosos irá se sobressair ao número de jovens e crianças até 2050, à vista disso, aumenta-se a preocupação em promover a qualidade de vida na terceira idade, no qual o governo por sua vez, criou um programa que incentivasse a prestação de serviços que contribuíssem para o bem-estar dos idosos. O conceito de qualidade de vida e bem-estar, segundo diversos autores, abrange inúmeros aspectos da vida, como o nível sociocultural e econômico, familiar, psicológico e biológico. Este artigo utilizou um estudo de caso no Centro de Convivência e Apoio ao Idoso Casa de Clara, em que foi aplicado o questionário do Ferrans and Powers Quality of Life Index (QLI, desenvolvido mediante rigorosos critérios metodológicos e fundamentado em diversos estudos internacionais.

  5. Qualidade da água durante a formação de lagos profundos em cavas de mineração: estudo de caso do lago de Águas Claras - MG Water quality during the filling of deep mining lakes: case study of Aguas Claras pit lake - MG

    Directory of Open Access Journals (Sweden)

    Eduardo von Sperling

    2004-09-01

    Full Text Available O trabalho apresenta os resultados do monitoramento de qualidade da água durante o processo inicial de formação do Lago de Águas Claras, cuja gênese é decorrente do enchimento da cava exaurida de uma mineração de ferro. Em sua configuração final o lago possuirá uma área de 0,7 km² e uma profundidade máxima de 234 m, o que o posicionaria atualmente como o ambiente hídrico mais profundo do país. Constata-se o predomínio de uma boa qualidade de água, com baixo grau de mineralização, excelentes condições de oxigenação e ausência de contaminação orgânica e mineral. No aspecto hidrobiológico destaca-se a frequente alternância no predomínio de grupos algais, indicando a instabilidade de ecossistemas que se encontram em processo de formação.The paper presents the results of a broad monitoring program carried out during the beginning of the filling process of Lake Aguas Claras, Brazil. This lake was created after the exhaustion of an iron ore mining activity. In its final conformation the lake will have a surface area of 0,7 km² and the maximum depth of 234 m, which will make it the deepest lake in the country. The results of a two years monitoring program show the prevalence of good water quality (well oxygenated, low degree of mineralization, absence of organic and mineral contamination, but also a quite interesting shift in the dominance of phytoplanktonic groups, indicating the high instability of lakes that are undergoing a process of formation.

  6. Aislamiento y caracterización de cepas de rizobios aisladas de diferentes leguminosas en la región de Cascajal, Villa Clara Isolation and characterization of rhizobia strains isolated from different legumes in the Cascajal region, Villa Clara

    Directory of Open Access Journals (Sweden)

    Pérez Guianeya

    2008-06-01

    physiologicalbiochemical responses, such as the excretion of acid or base to the culture medium and the cetolactase assay. An in vitro nodulation essay was performed with each legume to determine the effectiveness of the isolates. According to the cultural characteristics, the growth rate in YMA method and the production of acid or base, the isolates obtained could belong to the genera Bradyrhizobium and Rhizobium and/or Sinorhizobium. The cetolactase test allowed to learn that none of the studied isolates belongs to the Agrobacterium genus. The trial with inoculated plants showed that all the isolated strains were effective in nodulation, because they nodulated in the tested legumes. It is concluded that from the isolated strains, 11 could belong to the genus Bradyrhizobium, while the other eight share similar characteristics with the genera Rhizobium and/or Sinorhizobium; all the isolates were effective in nodulation and they can be considered promising strains for obtaining inoculants for the studied forage legumes.

  7. Productivity

    DEFF Research Database (Denmark)

    Spring, Martin; Johnes, Geraint; Hald, Kim Sundtoft

    Productivity is increasingly critical for developed economies. It has always been important: as Paul Krugman puts it, “Productivity isn’t everything, but in the long run it is almost everything. A country’s ability to improve its standard of living over time depends almost entirely on its ability...... to raise its output per worker”(Krugman, 1994). Analyses of productivity have, by and large, been the preserve of economists. Operations Management (OM) is rooted in a similar concern for the efficient use of scarce resources; Management Accounting (MA) is concerned with the institutionalised measurement...... and management of productivity. Yet the three perspectives are rarely connected. This paper is a sketch of a literature review seeking to identify, contrast and reconcile these three perspectives. In so doing, it aims to strengthen the connections between policy and managerial analyses of productivity....

  8. Effect of controlled human exposure to diesel exhaust and allergen on airway surfactant protein D, myeloperoxidase and club (Clara) cell secretory protein 16.

    Science.gov (United States)

    Biagioni, B J; Tam, S; Chen, Y-W R; Sin, D D; Carlsten, C

    2016-09-01

    Air pollution is a major cause of global morbidity and mortality. Air pollution and aeroallergens aggravate respiratory illness, but the variable effects of air pollutants and allergens in the lung are poorly understood. To determine the effects of diesel exhaust (DE) and bronchial allergen challenge as single and dual exposures on aspects of innate immunity in the airway as reflected by surfactant protein D (SPD), myeloperoxidase (MPO) and club (Clara) cell secretory protein 16 (CC16) in 18 atopic individuals. In this double-blind, randomized crossover study, atopic individuals were exposed to DE or filtered air, followed by endobronchial allergen or saline 1 hour after inhalational exposure. Bronchoalveolar lavage, bronchial washings, nasal lavage and blood samples were obtained 48 hours after exposures and assayed for CC16, MPO and SPD by ELISA. In bronchial samples, the concentration of SPD increased from 53.3 to 91.8 ng/mL after endobronchial allergen, with no additional contribution from DE. MPO also increased significantly in response to allergen (6.8 to 14.7 ng/mL), and there was a small additional contribution from exposure to DE. The concentration of CC16 decreased from 340.7 to 151.0 ng/mL in response to DE, with minor contribution from allergen. These changes were not reflected in nasal lavage fluid or plasma samples. These findings suggest that allergen and DE variably influence different aspects of the innate immune response of the lung. SPD and MPO, known markers of allergic inflammation in the lung, are strongly increased by allergen while DE has a minor effect therein. DE induces a loss of CC16, a protective protein, while allergen has a minor effect therein. Results support site- and exposure-specific responses in the human lung upon multiple exposures. © 2016 John Wiley & Sons Ltd.

  9. CARCINOMA ODONTOGÉNICO DE CELULAS CLARAS. ESTUDIO CLÍNICO, RADIOLÓGICO Y PATOLÓGICO DE UN CASO.

    Directory of Open Access Journals (Sweden)

    Rosaura Rodríguez Flores

    2004-01-01

    Full Text Available Los tumores odontogénicos (TO son un grupo complejo y poco frecuente de neoplasias con características clínicas, radiológicas, histopatológicas y evolución muy variables. El Carcinoma odontogénico de células claras (COCC es una neoplasia maligna, de comportamiento agresivo variable que se presenta en maxilares. Histológicamente se constituye de nidos de células, frecuentemente de citoplasma claro, rico en glucógeno, rodeadas por bandas de colágena. Pertenece al grupo de los tumores odontogénicos epiteliales malignos. Se presenta el caso de un hombre de 57 años con un tumor en hueso y seno maxilar izquierdo, sometido a hemimaxilectomía subtotal izquierda. Los estudios de imagen demostraron una lesión destructiva mixta en maxilar y seno maxilar izquierdo y la histología reveló la imagen clásica de COCC y la inmunohistoquímica mostró inmunoreactividad para Queratina AE1/AE3, EMA y S-100 (focal. Se demostró abudante glucógeno mediante la reacción de PAS en el citoplasma de las células neoplásicas. El paciente ha tenido seguimiento por 5 años y está asintomático después de la cirugía sin tratamiento complementario con radioterapia.

  10. Evaluación y modificación del Sistema de Tratamiento de Aguas Residuales de la Planta de Matanza del ITCR en Santa Clara, San Carlos

    Directory of Open Access Journals (Sweden)

    Alma Deloya Martínez

    2006-05-01

    Full Text Available La planta de matanza de ganado vacuno y porcino del ITCR, Sede San Carlos, en Santa Clara, procesa en promedio 23 reses y 11 cerdos por día. El caudal de aguas residuales promedio generado durante el proceso de matanza varió de un máximo de 72 m3/día hasta un mínimo de 12 m3/día. Las aguas residuales son tratadas en un sistema de tratamiento biológico anaerobio, para controlar la contaminación del agua, según el Reglamento de vertido y reúso de aguas residuales. El sistema original consistió en un tanque de aireación y un sedimentador integrado al tanque de aireación. La aireación se suministraba por rotores mecánicos. Durante el desarrollo del proyecto, se encontró que el principal problema en la operación y control del sistema eran los sólidos suspendidos totales y los sólidos sedimentables, no presentándose problemas de calidad del efluente en términos de DBO, DQO y otros parámetros. Para solucionar el problema de los sólidos, en el efluente del sistema de tratamiento se modificó el sistema aerobio existente a un sistema anaerobio (para reducir la producción de sólidos, usando como ayuda del tratamiento un compuesto biológico, que actúa como floculante y coagulante, lo que mejora la sedimentación de los sólidos. Con la modificación del sistema, se alcanzaron eficiencias de remoción de los sólidos sedimentables en un 95%, de la demanda bioquímica de oxígeno DBO en un 83% y la DQO en un 75%, cumpliéndose con la normativa para todos los parámetros exigidos por el Ministerio de Salud.

  11. Características generales del campo mineral aurífero aguas claras en el contexto geológico regional de la provincia Holguín, Cuba

    OpenAIRE

    Costafreda Mustelier, Jorge Luis

    1996-01-01

    El Campo Mineral Aurífero de Aguas Claras se ubica al norte de Holguín, en una franja alargada de unos 15 kilómetros de longitud. Dentro de este campo mineral se encuentran cuatro minas principales: Nuevo Potosí: Formado por 3 tres cuerpos minerales en forma venas y diseminaciones auríferas (55.783 tn), espesor promedio es de 1,06 metros, contenido medio 7,89 g/t de Au y reserva de metal de 440,0 Kg. Agrupada: La mineralización aparece en venas de hasta 1.0 metro de espe...

  12. Facoemulsificação por córnea clara no meridiano mais curvo Phacoemulsification using clear cornea incision in steepest meridian

    Directory of Open Access Journals (Sweden)

    Fernando Pistarini Gonçalves

    2007-03-01

    Full Text Available OBJETIVOS: Avaliar o efeito da facoemulsificação com incisão em córnea clara no meridiano mais curvo sobre a magnitude do astigmatismo ceratométrico pré-operatório. Mapear a magnitude do astigmatismo cirurgicamente induzido por incisões nas posições nasal (N, temporal (T, temporal superior (TS e temporal inferior (TI. MÉTODOS: Foi realizado estudo ceratométrico prospectivo em 48 olhos de 48 pacientes, submetidos a facoemulsificação com incisão do meridiano mais curvo. As medidas ceratométricas foram realizadas no pré-operatório e um mês após a realização da cirurgia. O astigmatismo cirurgicamente induzido foi determinado pelo método das coordenadas retangulares em 10 passos, modificado. RESULTADOS: Foram operados 21 olhos direitos e 27 olhos esquerdos e, de acordo com a posição das incisões em córnea clara, foram divididos em: 16 olhos N, 4 olhos T, 22 olhos TS, 6 olhos TI. A média da ametropia cilíndrica pré-operatória foi de 1,06D ± 0,65 e a pós-operatória de 0,89D ± 0,80. Houve diminuição estatisticamente significativa no astigmatismo corneal preexistente (p=0,016. A média total de astigmatismo cirurgicamente induzido foi de 0,94D ± 0,56. Em relação aos grupos o astigmatismo cirurgicamente induzido foi de 1,06D ± 0,66 em N, 0,87D ± 0,20 em T, 0,95D ± 0,55 em TS e 0,61D ± 0,25 em TI. Não houve diferença estatística com relação ao astigmatismo cirurgicamente induzido nos grupos N, T, TS e TI (p=0,426. CONCLUSÃO: A técnica se mostrou efetiva na redução do astigmatismo ceratométrico pré-operatório. A média do astigmatismo cirurgicamente induzido foi de 1,06D ± 0,66 em N, 0,95D ± 0,55 em TS, 0,61D ± 0,25 em T e 0,87D ± 0,20 em TI.PURPOSE: To evaluate the effect of phacoemulsification through clear cornea incision in the steepest meridian (ISM, on the magnitude of preoperative keratometric astigmatism. To map the magnitude of surgically induced astigmatism (SIA by clear cornea incision

  13. ARGE DFC - A European approach to MCFC commercialization

    Energy Technology Data Exchange (ETDEWEB)

    Kraus, P.; Huppmann, G. [MTU Friedrichshafen GmbH, Muenchen (Germany); Heiming, A. [Ruhgras AG, Dorsten (Germany)] [and others

    1996-12-31

    The largest European program for the commercialization of the molten carbonate fuel cell technology is carried out by the European Direct Fuel Cell Consortium (ARGE DFC). The consortium consists of the following companies: (1) MTU Friedrichshafen GmbH (Germany), within the DaimlerBenz Group responsible for off-road propulsion and decentralized energy systems. (2) Haldor Topsoe A/S (Denmark), a plant engineering company and specialist for catalytic processes (3) Elkraft A.m.b.A. (Denmark), one of the countries two utility companies (4) Ruhrgas AG (Germany), the largest German gas company (5) RWE AG (Germany), the largest German electrical utility company MTU acts as a consortium leader. The company shares a license and technology exchange agreement with Energy Research Corporation of Danbury, Connecticut.

  14. Avaliação histopatológica e histoquímica das células claras em lesões odontogênicas císticas

    Directory of Open Access Journals (Sweden)

    Cláudia Roberta Leite Vieira de Figueiredo

    Full Text Available Alterações degenerativas e metaplásicas são usualmente observadas no revestimento epitelial dos cistos odontogênicos. Nos tumores odontogênicos estes processos são considerados mais raros. Objetivo: demonstrar a presença de células claras no revestimento epitelial de uma série de lesões odontogênicas císticas. Métodos: realizou-se um estudo descritivo, em uma amostra de 22 lâminas histológicas, do total de lesões odontogênicas císticas procedentes do Laboratório de Patologia Bucal da Universidade Federal da Paraíba. As lâminas foram examinadas por dois avaliadores previamente calibrados e os blocos parafinados correspondentes às lesões em que se observaram células claras, foram novamente processados, e as lâminas foram coradas pela técnica do Ácido Periódico de Schiff após digestão pela diástase e avaliadas quanto à presença de células mucosas. Resultados: células contendo mucina estavam presentes em 12 (54,5 % das lesões coradas pelo Ácido Periódico de Schiff com diástase. Células mucosas foram observadas em 5 (41,66 % dos 12 casos de cistos radiculares, 1 (50 % dos 2 casos de tumores odontogênicos ceratocísticos, nos 4 (100 % casos de cistos dentígeros e em 2 (100 % casos de ameloblastomas unicísticos. Células claras foram muitas vezes observadas em áreas de inflamação. Conclusão: na amostra estudada, células mucosas puderam ser evidenciadas ocasionalmente no epitélio de lesões odontogênicas císticas.

  15. Significación y trascendencia del género epistolar en la política cortesana: la correspondencia inédita entre la Infanta Isabel Clara Eugenia y el Marqués de Velada

    Directory of Open Access Journals (Sweden)

    Santiago Martínez Hernández

    2004-08-01

    Full Text Available The aim of this paper is make known the unpublished correspondence maintained between the Infanta Isabel Clara Eugenia and the Marquis of Velada, her lord high steward for a period of eleven years in the early seventeenth century. This private correspondence has become a vital source of information, especially for the historiography of the court, specifically in comparison with official correspondence. The content of the letters brings nuance and personal judgements which, by virtue of the freedom with which they were written, prove to have a much greater value than the public documents. Certainly, the letters not only transmitted news but also became a powerful means for maintaining the relationship over a considerable distance. This correspondence provides a number of insights into the political and personal relations between a princess and a courtier. The article also includes a transcription and abstract of the letters.

  16. Chemical products induce resistance to Xanthomonas perforans in tomato

    Directory of Open Access Journals (Sweden)

    Adriana Terumi Itako

    2015-09-01

    Full Text Available The bacterial spot of tomato, caused by Xanthomonas spp., is a very important disease, especially in the hot and humid periods of the year. The chemical control of the disease has not been very effective for a number of reasons. This study aimed to evaluate, under greenhouse conditions, the efficacy of leaf-spraying chemicals (acibenzolar-S-methyl (ASM (0.025 g.L−1, fluazinam (0.25 g.L−1, pyraclostrobin (0.08 g.L−1, pyraclostrobin + methiran (0.02 g.L−1 + 2.2 g.L−1, copper oxychloride (1.50 g.L−1, mancozeb + copper oxychloride (0.88 g.L−1 + 0.60 g.L−1, and oxytetracycline (0.40 g.L−1 on control of bacterial spot. Tomatoes Santa Clara and Gisele cultivars were pulverized 3 days before inoculation with Xanthomonas perforans. The production of enzymes associated with resistance induction (peroxidase, polyphenol oxidase, phenylalanine ammonia-lyase, β-1,3-glucanase, and protease was quantified from leaf samples collected 24 hours before and 24 hours after chemical spraying and at 1, 2, 4, 6, and 8 days after bacterial inoculation. All products tested controlled bacterial spot, but only ASM, pyraclostrobin, and pyraclostrobin + metiram increased the production of peroxidase in the leaves of the two tomato cultivars, and increased the production of polyphenol oxidase and β-1,3-glucanase in the Santa Clara cultivar.

  17. Chemical products induce resistance to Xanthomonas perforans in tomato.

    Science.gov (United States)

    Itako, Adriana Terumi; Tolentino Júnior, João Batista; Silva Júnior, Tadeu Antônio Fernandes da; Soman, José Marcelo; Maringoni, Antonio Carlos

    2015-01-01

    The bacterial spot of tomato, caused by Xanthomonas spp., is a very important disease, especially in the hot and humid periods of the year. The chemical control of the disease has not been very effective for a number of reasons. This study aimed to evaluate, under greenhouse conditions, the efficacy of leaf-spraying chemicals (acibenzolar-S-methyl (ASM) (0.025 g.L(-1)), fluazinam (0.25 g.L(-1)), pyraclostrobin (0.08 g.L(-1)), pyraclostrobin + methiran (0.02 g.L(-1) + 2.2 g.L(-1)), copper oxychloride (1.50 g.L(-1)), mancozeb + copper oxychloride (0.88 g.L(-1) + 0.60 g.L(-1)), and oxytetracycline (0.40 g.L(-1))) on control of bacterial spot. Tomatoes Santa Clara and Gisele cultivars were pulverized 3 days before inoculation with Xanthomonas perforans. The production of enzymes associated with resistance induction (peroxidase, polyphenol oxidase, phenylalanine ammonia-lyase, β-1,3-glucanase, and protease) was quantified from leaf samples collected 24 hours before and 24 hours after chemical spraying and at 1, 2, 4, 6, and 8 days after bacterial inoculation. All products tested controlled bacterial spot, but only ASM, pyraclostrobin, and pyraclostrobin + metiram increased the production of peroxidase in the leaves of the two tomato cultivars, and increased the production of polyphenol oxidase and β-1,3-glucanase in the Santa Clara cultivar.

  18. Viscosity of egg white from hens of different strains fed with commercial and natural additives Viscosidade da clara de ovo proveniente de poedeiras de diferentes espécies com aditivos comerciais e naturais

    Directory of Open Access Journals (Sweden)

    Fernanda Papa Spada

    2012-03-01

    Full Text Available Yolk color and egg white (albumen cleanliness and viscosity are important parameters by which consumers judge the quality of eggs. This study aimed to investigate changes in albumen viscosity during storage of eggs for up to 36 days from two different commercial laying hen strains (Carijo Barbada and Isa Brown fed a diet containing annatto (1.5 and 2.0% or a synthetic additive without synthetic colorants (control. Analyses of humidity, albumen height, pH, viscosity, foam formation, and stability were carried out on eggs. Carijo Barbada strain had smaller albumen, lower humidity and higher egg white viscosity than Isa Brown strain; however, with storage, viscosity lowered significantly on both strains. Initially, the addition of 2.0% of annatto or a synthetic additive increased viscosity in both strains, but with storage only the control maintained longer viscosity. Lower viscosity did not change foam density and stability.A coloração da gema, transparência e viscosidade da clara (albúmen são parâmetros importantes que os consumidores consideram na avaliação dos ovos. O objetivo do estudo foi verificar as trocas que ocorrem na armazenagem por 36 dias em relação à viscosidade da clara de ovos produzidos por poedeiras de duas diferentes linhagens (Carijo Barbada eIsa Brown , as quais receberam dietas contendo urucum (1,5 e 2,0% ou aditivo sintético. Foram realizadas as análises de umidade, altura do albúmen, pH, viscosidade, formação e estabilidade da espuma. A linhagem Carijó Barbada apresentou menor quantidade de albúmen, menor umidade e maior viscosidade que a linhagem Isa Brown, entretanto, com a estocagem, a viscosidade diminuiu significativamente para ambas as linhagens. Inicialmente, a adição de 2,0% de urucum ou aditivo sintético foi suficiente para aumentar a viscosidade em ovos obtidos de ambas as linhagens, mas com a estocagem, somente o controle manteve maior viscosidade. A baixa viscosidade não interferiu na

  19. Os Meios de Comunicação e a Figura da Mulher: uma reflexão sobre a personagem Clara da telenovela Em Família

    Directory of Open Access Journals (Sweden)

    Maria Aparecida Baccega

    2016-06-01

    Full Text Available O presente artigo tem por objetivo refletir acerca da construção da figura da mulher operada pelos meios de comunicação, através de um dos seus produtos culturais, a telenovela brasileira. Para tanto, propõe uma investigação que aborda a visibilidade da mulher na mídia, trazendo como arcabouço teórico Baccega (1994; 1999, Escosteguy (2011 e Hall (2013, no que tange aos discursos midiáticos; Lippmann (1966, Bourdieu (2002, Scott (1995, Butler (2015 e Louro (2000 para refletir sobre a figura da mulher. Levando em conta o contexto hegemônico, o presente artigo propõe discutir a ideologia bem como a indústria cultural a fim de analisar, como objeto empírico, a personagem Clara, protagonizada pela atriz Giovanna Antonelli, na telenovela brasileira Em Família, da TV Globo.

  20. Produção e características físico-químicas dos cachos da videira 'BRS Clara' sob cobertura plástica e sombrite em safra fora de época

    Directory of Open Access Journals (Sweden)

    Lilian Yukari Yamamoto

    2012-03-01

    Full Text Available Devido às condições climáticas favoráveis à ocorrência de doenças fúngicas em uvas de mesa, tem-se buscado a adoção de tecnologias que propiciem a redução nos custos de produção, sendo uma alternativa o cultivo de uvas sob cobertura plástica. O objetivo deste trabalho foi avaliar a produção e as características físico-químicas dos cachos da videira 'BRS Clara' enxertada sobre o porta-enxerto IAC-766 'Campinas', em cultivo protegido durante a safra fora de época, visando à redução da aplicação de fungicidas para o controle do míldio. Os experimentos foram realizados em pomares comerciais localizados em Uraí e Marialva-PR. As videiras foram conduzidas no sistema latada, em espaçamento de 4,0 x 4,0 m, em Uraí, e de 2,0 x 5,0 m, em Marialva. O delineamento experimental foi o inteiramente casualizado, com dois sistemas de cultivo protegido (sob cobertura plástica e sob sombrite e sete repetições. No experimento conduzido em Uraí, não foram verificadas diferenças entre os sistemas de cultivo protegido quanto às características produtivas e químicas das bagas, como o teor de sólidos solúveis totais, índice de maturação e pH. Verificou-se a ocorrência do míldio somente nas folhas, sendo a incidência e a severidade menor nas videiras sob cobertura plástica (0,5 e 0,02%, respectivamente. Em Marialva, também não houve influência das coberturas nas características produtivas das videiras. Entretanto, o teor de sólidos solúveis totais das bagas sob cobertura plástica foi superior em relação àquelas sob sombrite (19,6 e 17,2ºBrix, respectivamente. Não foi detectada a ocorrência de míldio em nenhum dos sistemas de cultivo protegido nessa localidade. Conclui-se que o uso da cobertura plástica permite a redução do número de aplicações de fungicidas para o controle do míldio, sem alterar as características produtivas da uva 'BRS Clara'.

  1. Esker Ri Nursing Home, Kilnabinnia, Clara, Offaly.

    LENUS (Irish Health Repository)

    McKenna, Malachi

    2017-03-01

    Atypical femur fractures (AFFs) are associated with long-term bisphosphonate (BP) therapy. Early identification of AFF prior to their completion provides an opportunity to intervene, potentially reducing morbidity associated with these fractures. Single-energy X-ray absorptiometry (SE) is an imaging method recently shown to detect incomplete AFF (iAFF) prior to fracture completion.

  2. Floodplain Mapping, SANTA CLARA COUNTY, CALIFORNIA, USA

    Data.gov (United States)

    Federal Emergency Management Agency, Department of Homeland Security — The Floodplain Mapping/Redelineation study deliverables depict and quantify the flood risks for the study area. The primary risk classifications used are the...

  3. DCS Hydrology, Santa Clara County, California

    Data.gov (United States)

    Federal Emergency Management Agency, Department of Homeland Security — Hydrology data include spatial datasets and data tables necessary for documenting the hydrologic procedures for estimating flood discharges for a flood insurance...

  4. Characterization of AVHRR global cloud detection sensitivity based on CALIPSO-CALIOP cloud optical thickness information: demonstration of results based on the CM SAF CLARA-A2 climate data record

    Science.gov (United States)

    Karlsson, Karl-Göran; Håkansson, Nina

    2018-02-01

    The sensitivity in detecting thin clouds of the cloud screening method being used in the CM SAF cloud, albedo and surface radiation data set from AVHRR data (CLARA-A2) cloud climate data record (CDR) has been evaluated using cloud information from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) onboard the CALIPSO satellite. The sensitivity, including its global variation, has been studied based on collocations of Advanced Very High Resolution Radiometer (AVHRR) and CALIOP measurements over a 10-year period (2006-2015). The cloud detection sensitivity has been defined as the minimum cloud optical thickness for which 50 % of clouds could be detected, with the global average sensitivity estimated to be 0.225. After using this value to reduce the CALIOP cloud mask (i.e. clouds with optical thickness below this threshold were interpreted as cloud-free cases), cloudiness results were found to be basically unbiased over most of the globe except over the polar regions where a considerable underestimation of cloudiness could be seen during the polar winter. The overall probability of detecting clouds in the polar winter could be as low as 50 % over the highest and coldest parts of Greenland and Antarctica, showing that a large fraction of optically thick clouds also remains undetected here. The study included an in-depth analysis of the probability of detecting a cloud as a function of the vertically integrated cloud optical thickness as well as of the cloud's geographical position. Best results were achieved over oceanic surfaces at mid- to high latitudes where at least 50 % of all clouds with an optical thickness down to a value of 0.075 were detected. Corresponding cloud detection sensitivities over land surfaces outside of the polar regions were generally larger than 0.2 with maximum values of approximately 0.5 over the Sahara and the Arabian Peninsula. For polar land surfaces the values were close to 1 or higher with maximum values of 4.5 for the parts

  5. Extensive validation of CM SAF surface radiation products over Europe.

    Science.gov (United States)

    Urraca, Ruben; Gracia-Amillo, Ana M; Koubli, Elena; Huld, Thomas; Trentmann, Jörg; Riihelä, Aku; Lindfors, Anders V; Palmer, Diane; Gottschalg, Ralph; Antonanzas-Torres, Fernando

    2017-09-15

    This work presents a validation of three satellite-based radiation products over an extensive network of 313 pyranometers across Europe, from 2005 to 2015. The products used have been developed by the Satellite Application Facility on Climate Monitoring (CM SAF) and are one geostationary climate dataset (SARAH-JRC), one polar-orbiting climate dataset (CLARA-A2) and one geostationary operational product. Further, the ERA-Interim reanalysis is also included in the comparison. The main objective is to determine the quality level of the daily means of CM SAF datasets, identifying their limitations, as well as analyzing the different factors that can interfere in the adequate validation of the products. The quality of the pyranometer was the most critical source of uncertainty identified. In this respect, the use of records from Second Class pyranometers and silicon-based photodiodes increased the absolute error and the bias, as well as the dispersion of both metrics, preventing an adequate validation of the daily means. The best spatial estimates for the three datasets were obtained in Central Europe with a Mean Absolute Deviation (MAD) within 8-13 W/m 2 , whereas the MAD always increased at high-latitudes, snow-covered surfaces, high mountain ranges and coastal areas. Overall, the SARAH-JRC's accuracy was demonstrated over a dense network of stations making it the most consistent dataset for climate monitoring applications. The operational dataset was comparable to SARAH-JRC in Central Europe, but lacked of the temporal stability of climate datasets, while CLARA-A2 did not achieve the same level of accuracy despite predictions obtained showed high uniformity with a small negative bias. The ERA-Interim reanalysis shows the by-far largest deviations from the surface reference measurements.

  6. Transport and concentration controls for chloride, strontium, potassium and lead in Uvas Creek, a small cobble-bed stream in Santa Clara County, California, U.S.A. 1. Conceptual model

    Science.gov (United States)

    Kennedy, V.C.; Jackman, A.P.; Zand, S.M.; Zellweger, G.W.; Avanzino, R.J.

    1984-01-01

    Stream sediments adsorb certain solutes from streams, thereby significantly changing the solute composition; but little is known about the details and rates of these adsorptive processes. To investigate such processes, a 24-hr. injection of a solution containing chloride, strontium, potassium, sodium and lead was made at the head of a 640-m reach of Uvas Creek in west-central Santa Clara County, California. Uvas Creek is a cobble-bed pool-and-riffle stream draining the eastern slopes of the Santa Cruz Mountains. By September 12, 1973, after a long dry season, Uvas Creek had a low (0.0215 m3s-1 average) flow which varied diurnally, from 0.018 to 0.025 m3s-1. Because stream discharge varied while the injection rate was constant, the concentration of tracers (injected solutes), after mixing in the stream, varied inversely with discharge. Chloride, a nonreactive solute, served as a tracer of water movement. Analysis of extensive chloride concentration data at five sites below the injection point during and after the injection demonstrated that there was considerable underflow of water through the stream gravels; however, the extent of underflow varied greatly within the study reach. Pre-injection water, displaced by tracer-laden water percolating through the gravels, diluted tracers in the stream channel, giving the mistaken impression of groundwater inflow at some points. Accurate measurement of total discharge in such streams requires prolonged tracer injection unless a reach can be found where underflow is negligible. Strontium and potassium were adsorbed by the bed sediments to a moderate extent and lead was strongly adsorbed. A high proportion of these metals could be removed by adsorption from percolating underflow because of extensive and intimate contact with bed sediments. After channel clearing following injection cutoff, 51% of the added strontium and 96% of the lead remained in the study reach, whereas only 19% of the chloride remained. Packets of sized

  7. Desempenho de um “wetland” vertical aplicado ao tratamento do efluente de um filtro anaeróbio em uma estação de tratamento de águas cinzas claras visando o reúso não potável em edificações residenciais

    OpenAIRE

    Sarnaglia, Solange Aparecida Alho

    2014-01-01

    No tratamento de água cinza com vistas ao reúso predial os “wetlands” têm se mostrado como uma opção viável devido à boa remoção de poluentes, ao baixo custo de implantação e operação, além do baixo impacto ambiental quando comparados a outros sistemas. O presente estudo teve como objetivo caracterizar físico-química e microbiologicamente a água cinza clara gerada em um edifício universitário avaliar a influência das cargas hidráulica e orgânica na remoção de matéria orgânica, turbidez e de c...

  8. Direct fuel cell product design improvement

    Energy Technology Data Exchange (ETDEWEB)

    Maru, H.C.; Farooque, M. [Energy Research Corp., Danbury, CT (United States)

    1996-12-31

    Significant milestones have been attained towards the technology development field testing and commercialization of direct fuel cell power plant since the 1994 Fuel Cell Seminar. Under a 5-year cooperative agreement with the Department of Energy signed in December 1994, Energy Research Corporation (ERC) has been developing the design for a MW-scale direct fuel cell power plant with input from previous technology efforts and the Santa Clara Demonstration Project. The effort encompasses product definition in consultation with the Fuel Cell Commercialization Group, potential customers, as well as extensive system design and packaging. Manufacturing process improvements, test facility construction, cell component scale up, performance and endurance improvements, stack engineering, and critical balance-of-plant development are also addressed. Major emphasis of this product design improvement project is on increased efficiency, compactness and cost reduction to establish a competitive place in the market. A 2.85 MW power plant with an efficiency of 58% and a footprint of 420 m{sup 2} has been designed. Component and subsystem testing is being conducted at various levels. Planning and preparation for verification of a full size prototype unit are in progress. This paper presents the results obtained since the last fuel cell seminar.

  9. Fuel cells are gaining ground. Fuel cells as a key technology: future potential, state of the art, economic aspects, practical reports. Proceedings. Brennstoffzellen auf dem Vormarsch. Die Brennstoffzelle als Schluesseltechnologie. Zukunftspotentiale, Stand der Technik, Wirtschaftlichkeit und Praxisberichte. Tagungsband

    Energy Technology Data Exchange (ETDEWEB)

    1999-01-01

    This conference report comprises 16 papers on fuel cells. Subjects: Funds for fuel cell technology provided by the 4. programme for energy research and energy technologies; Funds provided by the European Commission for demonstration projects; Fuel cells: Stationary applications in power supply; Liberalisation of the energy markets - effects on fuel cell development; Fuel cell technology from a utility's point of view; PEMFC membrane fuel cells; PFC in domestic energy supply; Applications of PEMFC in stationary power generation; Development of a fuel cell drive; Comparative evaluations of passenger car drives with fuel cells and internal combustion engines; Economic aspects of PAFC fuel cells; Development of the carbonate fuel cell (MCFC); Demonstration plant at Santa Clara (MCFC); Development, demonstration and application of oxide ceramics fuel cells SOFC, Experience with SOFC. Four contributions are available as separate records in this database.

  10. Properties of LiCoO{sub 2}-coated NiO MCFC cathode

    Energy Technology Data Exchange (ETDEWEB)

    Kuk, S.T.; Kim, C.K.; Chun, H.S. [Korea Univ., Seoul (Korea, Republic of); Kwon, H.J. [Samsung Electronics Co. Ltd., Suwon (Korea, Republic of)

    1996-12-31

    PVA-assisted sol-gel method is useful in producing metal oxides with large surface area at low temperature. We fabricated LiCoO{sub 2}-coated NiO(LC-NiO) cathode by PVA-assisted sol-gel method and measured its properties, The electrical conductivity of LC-NiO cathode was measured to be more than 5 times as high as that of NiO and unit cell test showed improved performance. From the SEM images and Raman spectra. we confirmed that the structure of LC-NiO was different from that of NiO. For 250 hours of steady operation of unit cells. the mean voltage of the cells were 0.78V for NiO and 0.85V for LiCoO{sub 2}-Coated NiO at a current density of l50mA/cm{sup 2}.

  11. Status of development of the power plants on the base of MCFC in TFNC-VNIIEF

    Energy Technology Data Exchange (ETDEWEB)

    Novitski, E.Z.; Savkin, G.G.

    1996-04-01

    VNIIF started work on Molten Carbonate Fuel cells and power plants in 1991. Some results of VNIIF work in the direction of Autonomous Power Engineering are presented. Topics include molten carbonate fuel cell components, separator plates, manufacturing and testing, design, and goals.

  12. Heat balance of a molten carbonate fuel cell production hydrogen for a polymer electrolyte fuel cell-CoCell; Waermehaushalt einer Karbonat-Brennstoffzelle zur Wasserstoffherstellung fuer eine Polymerelektrolyt-Brennstoffzelle

    Energy Technology Data Exchange (ETDEWEB)

    Adamek, L.

    2006-10-17

    Molten carbonate fuel cells (MCFC) are being used in decentralised power plants, as they can reform hydrocarbon bound fuels internally, e.g. natural gas with a energy density of 10 kWh/m{sup 3} at standard conditions, and the efficiency of this mode of operation is around 50 %. However in comparison to other fuel cell systems the power density is only 5 kW/m{sup 3}. The power density of a polymerelectrolyte fuel cell (PEFC) is much higher (50 kW/m{sup 3}). These systems can be run with an efficiency of 50 %, too. Therefore they need hydrogen as a fuel, with an energy density of 2,9 kWh/m{sup 3} at standard conditions. Efficiency decreases to 35 to 40% using Methane as fuel, because of the reforming losses. The power density than is 6 kW/m3 and therefore as high as for a MCFC-system. Acombination of MCFC and PEFC, the so called CoCell, offers the following advantages: - A highly energetic, hydrocarbon based fuel can be used, e.g. Methane. - A high electrical efficiency is achieved. - The power density of this system is higher than for a fuel cell with reformer. In the CoCell the MCFC is working as electricity producing reformer for the PEFC. The off heat of the MCFC is used for reforming, whereby hydrogen is available, being utilised further in the power dense PEFC. The reforming capacity of the MCFC is limited by the internal heat balance. If the endothermic reforming consumes more heat than supplied by the material streams and the fuel cell waste heat, the stack cools down. The performance of such a combined fuel cell system has been evaluated in this thesis using the thermodynamic simulation software Aspen. Calculations reducing the utilisation in the MCFC by various heating techniques showed, that additional heat is supplied most efficiently by increasing the current density of the MCFC. Thereby the stack is heated electrically and the power density of the system is increased by the improved power density of the MCFC. The reduction of the utilisation is achieved

  13. Exergy analysis and optimisation of a marine molten carbonate fuel cell system in simple and combined cycle configuration

    International Nuclear Information System (INIS)

    Dimopoulos, George G.; Stefanatos, Iason C.; Kakalis, Nikolaos M.P.

    2016-01-01

    Highlights: • Process modelling and optimisation of an integrated marine MCFC system. • Component-level and spatially distributed exergy analysis and balances. • Optimal simple cycle MCFC system with 45.5% overall exergy efficiency. • Optimal combined cycle MCFC system with 60% overall exergy efficiency. • Combined cycle MCFC system yields 30% CO_2 relative emissions reduction. - Abstract: In this paper we present the exergy analysis and design optimisation of an integrated molten carbonate fuel cell (MCFC) system for marine applications, considering waste heat recovery options for additional power production. High temperature fuel cells are attractive solutions for marine energy systems, as they can significantly reduce gaseous emissions, increase efficiency and facilitate the introduction of more environmentally-friendly fuels, like LNG and biofuels. We consider an already installed MCFC system onboard a sea-going vessel, which has many tightly integrated sub-systems and components: fuel delivery and pre-reforming, internal reforming sections, electrochemical conversion, catalytic burner, air supply and high temperature exhaust gas. The high temperature exhaust gasses offer significant potential for heat recovery that can be directed into both covering the system’s auxiliary heat requirements and power production. Therefore, an integrated systems approach is employed to accurately identify the true sources of losses in the various components and to optimise the overall system with respect to its energy efficiency, taking into account the various trade-offs and subject to several constraints. Here, we present a four-step approach: a. dynamic process models development of simple and combined-cycle MCFC system; b. MCFC components and system models calibration via onboard MCFC measurements; c. exergy analysis, and d. optimisation of the simple and combined-cycle systems with respect to their exergetic performance. Our methodology is based on the

  14. Una nota sobre escultura castellana del siglo XIII: Juan González, el pintor de las imágenes de Burgos, y el sepulcro de doña Mayor Guillén de Guzmán en el convento de Santa Clara de Alcocer (Guadalajara

    Directory of Open Access Journals (Sweden)

    Gutiérrez Baños, Fernando

    2015-03-01

    Full Text Available In 2009 Christie’s London brought to light the contract for the tomb of doña Mayor Guillén de Guzmán († c. 1263, former mistress of king Alfonso X the Wise. The contract comes from the convent of Poor Clares of Alcocer (Guadalajara, where the tomb itself remained until completely destroyed in 1936 at the beginning of the Spanish Civil War. Dated in Burgos in 1276, the document provides a full description of the work to be carried out. This allows us to compare it with other contemporary tombs, underlining the highly innovative features of that created for doña Mayor. In addition, the document provides access to the personality of the artist responsible for this work: a certain until now unknown Juan González, who introduces himself as el pintor de las imágenes de Burgos (‘the painter of images of Burgos’.En 2009 Christie’s de Londres dio a conocer el contrato del sepulcro de doña Mayor Guillén de Guzmán († c. 1263, antigua amante del rey Alfonso X el Sabio. El contrato procede del convento de Santa Clara de Alcocer (Guadalajara, donde el propio sepulcro se conservó hasta su completa destrucción en 1936 al estallar la Guerra Civil. Datado en Burgos en 1276, el documento nos proporciona una completa descripción de la obra a realizar. Esto nos permitirá compararla con otros sepulcros contemporáneos, subrayando los rasgos altamente innovadores del sepulcro de doña Mayor. Por otra parte, el documento nos permitirá acceder a la personalidad del artista responsable de la obra: un cierto Juan González, desconocido hasta la fecha, que se presenta como el pintor de las imágenes de Burgos.

  15. Produção de cultivares de tomateiro em hidroponia e fertirrigação sob razões de nitrogênio e potássio Production of tomato cultivars in hydroponics and fertigation with different ratios between nitrogen and potassium

    Directory of Open Access Journals (Sweden)

    Gláucio C Genuncio

    2010-12-01

    and potassium supplies which provides such results has not been sufficiently evaluated. The fruit yield and quality of four tomato cultivars were evaluated in hydroponics and fertigation systems at two ratios between N and K provided to the plants. Two experiments were carried out simultaneously in greenhouse, in 4x2 factorial design with four replicates, comprising four genotypes (cultivars Cereja 261, San Marzano, Santa Clara and the hybrid Cereja Chipano and two N:K ratios (1:1.5 and 1:2 in hydroponics, and 1:2 and 1:3 in fertigation. Average yield of marketable fruits was 2.5 and 1.8 kg/plant in the hydroponics and fertigation system, respectively, reaching 3.3 kg/plant for cv. Santa Clara in hydroponics. In hydroponics, the N:K ratios nor did affect fruit production nor the soluble solids concentration, but the marketable fruit yield increased 6.5% at the N:K ratio 1:2. The N:K ratio 1:2 in hydroponics increased the average mass and diameter of marketable fruits, reducing K concentration in fruits. In the fertigation system, the N:K ratio 1:3 stimulated the vegetative growth of tomato plants but did not affect the fruit quality and yield. The cultivars San Marzano and Santa Clara presented higher fruit yield in both experiments. Fruit yield and total soluble solids of San Marzano and Santa Clara were higher in the hydroponics system when compared to fertigation. The hydroponics system provided higher fruit yield than the fertigation system for San Marzano and Santa Clara and, in hydroponics, the N:K ratio 1:2 improved fruits with higher marketable quality

  16. Crescere errando: minori immigrati non accompagnati" (Clara Silva - Giovanna Campani

    Directory of Open Access Journals (Sweden)

    Olivia Salimbeni

    2005-12-01

    Full Text Available La presenza in Italia di minori immigrati non accompagnati è un fenomeno recente e tuttavia in forte crescita. Questo testo raccoglie i risultati di quella che potremmo definire la seconda di tre tappe di una ricerca europea incentrata sullo studio del fenomeno dei minori immigrati non accompagnati, avviata nel 2000 e da poco terminata. L’indagine è stata svolta nel quadro di finanziamento del 'Programma Daphne' della Commissione Europea e ha riguardato nelle prime due fasi tre realtà europee, Italia, Germania e Finlandia e nella terza altre realtà quali il Portogallo, la Spagna, la Francia e la Grecia.

  17. 77 FR 39726 - Land Acquisitions: Pueblo of Santa Clara

    Science.gov (United States)

    2012-07-05

    ... Indian Affairs, 1001 Indian School Road NW., Albuquerque, NM 87104-2303; Telephone (505) 563-3337, sandy...., Sec. 17, lots 1 to 8, inclusive; Sec. 18, lots 5 to 12, inclusive; Sec. 19, lots 12 to 17, inclusive...

  18. Em torno da luz cristalina: clara voz de Pedro Salinas

    Directory of Open Access Journals (Sweden)

    Cristiano Moreira

    2015-06-01

    Full Text Available http://dx.doi.org/10.5007/2176-8552.2016n20p147 O texto que segue pretende ler a poesia de Pedro Salinas e Jorge Guillén diante de uma perspectiva que faz da voz uma iluminação e uma resistência diante do tempo histórico e da predominância de uma leitura simples das imagens. Assim, alguns poemas escolhidos permitem uma leitura contemporânea a respeito da voz, seguindo o conceito de Stimmung recuperado por Giorgio Agamben e as lições de poesia de Paul Valéry, e formam aspectos imprescindíveis para ler a poesia destes poetas. Ao manter em sua produção uma conversação com seus predecessores, Pedro Salinas joga com o logos e faz da phoné matéria prima para sua obra.

  19. 78 FR 67210 - Santa Clara Pueblo Disaster #NM-00038

    Science.gov (United States)

    2013-11-08

    .../2013 Effective Date: 10/29/2013 Physical Loan Application Deadline Date: 12/30/2013 Economic Injury...- Profit organizations that provide essential services of governmental nature may file disaster loan... Non-Profit Organizations Without Credit Available Elsewhere 2.875 For Economic Injury: Non-Profit...

  20. Tobacco Products

    Science.gov (United States)

    ... Exposure is High in Multiunit Housing Smokeless Products Electronic Cigarettes Youth Tobacco Prevention Tobacco Products Tobacco Ingredient ... Tweet Share Compartir Find Fact Sheets on Products (Cigars, Bidis and Betel Quid with Tobacco (Gutka) and ...

  1. SPDEF is required for mouse pulmonary goblet cell differentiation and regulates a network of genes associated with mucus production.

    Science.gov (United States)

    Chen, Gang; Korfhagen, Thomas R; Xu, Yan; Kitzmiller, Joseph; Wert, Susan E; Maeda, Yutaka; Gregorieff, Alexander; Clevers, Hans; Whitsett, Jeffrey A

    2009-10-01

    Various acute and chronic inflammatory stimuli increase the number and activity of pulmonary mucus-producing goblet cells, and goblet cell hyperplasia and excess mucus production are central to the pathogenesis of chronic pulmonary diseases. However, little is known about the transcriptional programs that regulate goblet cell differentiation. Here, we show that SAM-pointed domain-containing Ets-like factor (SPDEF) controls a transcriptional program critical for pulmonary goblet cell differentiation in mice. Initial cell-lineage-tracing analysis identified nonciliated secretory epithelial cells, known as Clara cells, as the progenitors of goblet cells induced by pulmonary allergen exposure in vivo. Furthermore, in vivo expression of SPDEF in Clara cells caused rapid and reversible goblet cell differentiation in the absence of cell proliferation. This was associated with enhanced expression of genes regulating goblet cell differentiation and protein glycosylation, including forkhead box A3 (Foxa3), anterior gradient 2 (Agr2), and glucosaminyl (N-acetyl) transferase 3, mucin type (Gcnt3). Consistent with these findings, levels of SPDEF and FOXA3 were increased in mouse goblet cells after sensitization with pulmonary allergen, and the proteins were colocalized in goblet cells lining the airways of patients with chronic lung diseases. Deletion of the mouse Spdef gene resulted in the absence of goblet cells in tracheal/laryngeal submucosal glands and in the conducting airway epithelium after pulmonary allergen exposure in vivo. These data show that SPDEF plays a critical role in regulating a transcriptional network mediating the goblet cell differentiation and mucus hyperproduction associated with chronic pulmonary disorders.

  2. Production of Modularised Product Systems

    DEFF Research Database (Denmark)

    Jacobsen, Peter

    2004-01-01

    but a solution. Modularisation is one tool used in designing the products. Designing and controlling a production system making customized products in an economical way is not an easy task. In order to fulfil the Lean and Agile manufacturing philosophies the production is often carried out in networks. Here...

  3. Product Customization

    DEFF Research Database (Denmark)

    Hvam, Lars; Mortensen, Niels Henrik; Riis, Jesper

    For the majority of industrial companies, customizing products and services is among the most critical means to deliver true customer value and achieve superior competitive advantage. The challenge is not to customize products and services in itself – but to do it in a profitable way...... from more than 40 product configuration projects in companies providing customer tailored products and services........ The implementation of a product configuration system is among the most powerful ways of achieving this in practice, offering a reduction of the lead time for products and quotations, faster and more qualified responses to customer inquiries, fewer transfers of responsibility and fewer specification mistakes...

  4. 78 FR 39326 - Notice Pursuant To the National Cooperative Research and Production Act of 1993-Opendaylight...

    Science.gov (United States)

    2013-07-01

    ... Clara, CA; Cyan Inc., Petaluma, CA; Dell Inc., Round Rock, TX; Ericsson Inc., San Jose, CA; Fujitsu...Daylight's planned activity is to (a) Advance the creation, evolution, promotion, and support of an open...

  5. Workforce productivity.

    Science.gov (United States)

    Williams, Ruth

    2012-10-26

    Managers who are responsible for delivering the workforce productivity element of the Quality, Innovation, Productivity and Prevention (QIPP) programme can network and share best practice through a dedicated NHS Employers webpage.

  6. Primary productivity

    Digital Repository Service at National Institute of Oceanography (India)

    Verlecar, X.N.; Parulekar, A.H.

    Photosynthetic production in the oceans in relation to light, nutrients and mixing processes is discussed. Primary productivity in the estuarine region is reported to be high in comparison to coastal and oceanic waters. Upwelling phenomenon...

  7. Product (RED)

    DEFF Research Database (Denmark)

    Ponte, Stefano

    2011-01-01

    ) and the consumers who buy iconic brand products to help ‘distant others’. While in many other forms of causumerism, labels or certification systems ‘prove’ that a product is just, in RED, aid celebrities provide the proof. From the consumer point of view both labels and celebrities provide a similar simplification...... of complex social, economic, and environmental processes. At the same time, we argue that there are important distinctions as well—labels and certifications are ultimately about improving the conditions of production, whereas RED is about accepting existing production and trade systems and donating......(PRODUCT)RED™ (hereafter RED) is a cobranding initiative launched in 2006 by the aid celebrity Bono to raise money from product sales to support The Global Fund to Fight AIDS, Tuberculosis and Malaria. In this paper we argue that RED is shifting the boundaries of ‘causumerism’ (shopping...

  8. Study of NiO cathode modified by rare earth oxide additive for MCFC by electrochemical impedance spectroscopy

    International Nuclear Information System (INIS)

    Huang Bo; Chen Gang; Li Fei; Yu Qingchun; Hu Keao

    2004-01-01

    The preparation and subsequent oxidation of nickel cathodes modified by impregnation with rare earth oxide were evaluated by surface and bulk analysis. The electrochemical behaviors of rare earth oxide impregnated nickel oxide cathodes were also evaluated in a molten 62 mol% Li 2 CO 3 +38 mol% K 2 CO 3 eutectic at 650 deg. C by electrochemical impedance spectroscopy (EIS) as a function of rare earth oxide content and immersion time. The rare earth oxide-impregnated nickel cathodes show almost the similar porosity, pore size, and morphology to the reference nickel cathode. The stability tests of rare earth oxide-impregnated nickel oxide cathodes show that the rare earth oxide additive can dramatically reduce the solubility of nickel oxide in a eutectic carbonate mixture under the standard cathode gas condition. The impedance response of all cathode materials at different immersion time is characterized by the presence of depressed semicircles in the high frequency range changing over into the lines with the angles of which observed with the real axis differing 45 deg. or 90 deg. in the low frequency range. The experimental Nyquist plots can be well analyzed theoretically with a modified model based on the well-known Randles-Ershler equivalent circuit model. In the new model, the double layer capacity (C d ) is replaced by the parallel combination of C d and b/ω; therefore, this circuit is modified to be the parallel combination of (C d ), b/ω, and the charge transfer resistance (R ct ) based on the Randles-Ershler equivalent circuit, to take into consideration both the non-uniformity of electric field at the electrode/electrolyte interface owing to the roughness of electrode surface, and the variety of relaxation times with adsorbed species on the electrode surface. The impedance spectra for all cathode materials show important variations during the 200 h of immersion. The incorporation of lithium in its structure and the low dissolution of nickel oxide and rare earth oxide are responsible for these changes. After that, the structure reaches a stable state. The rare earth oxide-impregnated nickel oxide cathodes show higher catalytic activity for oxygen reduction and lower dissolution of nickel oxide than the pure nickel oxide cathode. The cathode material having 1.0 wt.% of rare earth oxide shows the optimum behavior

  9. Construction and start-up of a 250 kW natural gas fueled MCFC demonstration power plant

    Energy Technology Data Exchange (ETDEWEB)

    Figueroa, R.A.; Carter, J.; Rivera, R.; Otahal, J. [San Diego Gas & Electric, CA (United States)] [and others

    1996-12-31

    San Diego Gas & Electric (SDG&E) is participating with M-C Power in the development and commercialization program of their internally manifolded heat exchanger (IMHEX{reg_sign}) carbonate fuel cell technology. Development of the IMHEX technology base on the UNOCAL test facility resulted in the demonstration of a 250 kW thermally integrated power plant located at the Naval Air Station at Miramar, California. The members of the commercialization team lead by M-C Power (MCP) include Bechtel Corporation, Stewart & Stevenson Services, Inc., and Ishikawajima-Harima Heavy Industries (IHI). MCP produced the fuel cell stack, Bechtel was responsible for the process engineering including the control system, Stewart & Stevenson was responsible for packaging the process equipment in a skid (pumps, desulfurizer, gas heater, turbo, heat exchanger and stem generator), IHI produced a compact flat plate catalytic reformer operating on natural gas, and SDG&E assumed responsibility for plant construction, start-up and operation of the plant.

  10. Generalized product

    OpenAIRE

    Greco, Salvatore; Mesiar, Radko; Rindone, Fabio

    2014-01-01

    Aggregation functions on [0,1] with annihilator 0 can be seen as a generalized product on [0,1]. We study the generalized product on the bipolar scale [–1,1], stressing the axiomatic point of view. Based on newly introduced bipolar properties, such as the bipolar increasingness, bipolar unit element, bipolar idempotent element, several kinds of generalized bipolar product are introduced and studied. A special stress is put on bipolar semicopulas, bipolar quasi-copulas and bipolar copulas.

  11. Swine production.

    Science.gov (United States)

    Plain, Ronald L; Lawrence, John D

    2003-07-01

    The US swine industry is large and growing. The quantity of pork desired by consumers of US pork is growing at the rate of 1.5%/y. New production systems and new technology have enabled production per sow to grow at a rate of 4% annually in recent years. Consequently, the number of sows in the United States is declining. Because productivity growth is outpacing demand growth, the deflated price of hogs and pork is declining. Hog production and prices continue to exhibit strong seasonal and cyclic patterns. Pork production is usually lowest in the summer and highest in the fall. Production and prices tend to follow 4-year patterns. The US swine industry continues to evolve toward fewer and larger producers who rely on contracts for both hog production and marketing. In 2000, over half of the hogs marketed were from approximately 156 firms marketing more than 50,000 head annually. These producers finished 60% of their production in contract facilities. Over 90% of their marketings were under contract or were owned by a packer. These producers expressed a high level of satisfaction with hog production. Both they and their contract growers were satisfied with production contracts. These large producers were satisfied with their marketing contracts and planned to continue them in the future. The hog industry has changed a great deal in the last decade. There is little reason to believe this rapid rate of change will not continue. This swine industry is highly competitive and profit driven. Profit margins are too small to allow producers the luxury of ignoring new technology and innovative production systems. Consequently, hog production will continue its rapid evolution from traditional agriculture to typical industry.

  12. Antiproton production

    International Nuclear Information System (INIS)

    Allaby, J.V.

    1984-01-01

    The basic definitions used in the physics literature on particle production are reviewed. The data on anti p production are interpreted in order to provide an estimate of the yield of anti p's from typical target at the antiproton accumulator, including the effects of re-absorption in the target. (orig.)

  13. Radioisotope production

    International Nuclear Information System (INIS)

    1988-01-01

    The trial production runs started in the previous report period were continued and have been extended to 67 Ga, 81 Rb/ 81m Kr and 111 In, the production of which will be taken over from the Pretoria cyclotron at the end of this year, when that machine is scheduled to be shut down. After commissioning of the target water cooling system and the helium cooling system for beam foil windows at the beginning of this year, these production runs could also be extended to high beam currents (up to 50 μA). Test consignments of a number of products have been supplied to various potential future users, and 123 I, in the form of Na 123 I capsules as well as 123 I-sodium hippurate, and 52 Fe-citrate have actually been used with success in trial diagnostic studies on patients. A procedure for labelling IPPA and 3-IPMPA with 123 I has been developed, while initial work has also been done on the radioiodination of monoclonal antifibrine antibodies. The last major facility needed for the commencement of the routine radioisotope production programme, namely the multiple-target facility, is now ready for installation in the production vault within the next few weeks, and routine production runs are expected to start in November 1988. 4 figs., 18 refs

  14. Ethanol production

    Energy Technology Data Exchange (ETDEWEB)

    Kolleurp, F; Daugulis, A J

    1985-05-01

    Extractive fermentation is a technique that can be used to reduce the effect of end-product inhibition through the use of a water-immiscible phase which removes fermentation products in situ. This has the beneficial effect of not only removing inhibitory products as they are formed (thus keeping reaction rates high) but also has the potential for reducing product recovery costs. We have chosen to examine the ethanol fermentation as a model system for end product inhibition and extractive fermentation, and have developed a computer model predicting the productivity enhancement possible with this technique. The model predicts an ethanol productivity of 82.6 g/L-h if a glucose feed of 750 g/L is fermented with a solvent having a distribution coefficient of 0.5 at a dilution rate of 5.0 h . This is more than 10 times higher than for a conventional chemostat fermentation of a 250 g/L glucose feed. In light of this, a systematic approach to extractive fermentation has been undertaken involving the screening of more than 1,000 solvents for their extractive properties. UNIFAC and UNIQUAC estimates of distribution coefficients and selectivities were compiled and ranked in a database, together with other important physical properties, such as density, surface tension and viscosity. Preliminary shake-flask and chemostat biocompatibility studies on the most promising solvents have been undertaken. The previous predictive, data base and experimental results are discussed.

  15. Product plots.

    Science.gov (United States)

    Wickham, Hadley; Hofmann, Heike

    2011-12-01

    We propose a new framework for visualising tables of counts, proportions and probabilities. We call our framework product plots, alluding to the computation of area as a product of height and width, and the statistical concept of generating a joint distribution from the product of conditional and marginal distributions. The framework, with extensions, is sufficient to encompass over 20 visualisations previously described in fields of statistical graphics and infovis, including bar charts, mosaic plots, treemaps, equal area plots and fluctuation diagrams. © 2011 IEEE

  16. Tanning Products

    Science.gov (United States)

    ... must obtain a signed, FDA-prescribed risk acknowledgement certification before use that states that they have been informed of the risks to health that may result from use of sunlamp products. Using tanning lamps, booths, or beds: If you ...

  17. Bc production

    International Nuclear Information System (INIS)

    Lusignoli, M.; Masetti, M.; Petrarca, S.

    1991-01-01

    The pseudoscalar meson B c is the simplest particle containing more than one heavy quark of different flavours. Its production cross sections at accelerators presently running or in project are estimated using the HERWIG parton shower Monte Carlo code. (orig.)

  18. Production models

    DEFF Research Database (Denmark)

    Svensson, Carsten

    2002-01-01

    The Project is co-financed with Nilpeter A/S and investigates the industrialization of build to order production. Project content: - Enterprise engineering - Specification processes - Mass Customization/ Build To Order - Knowledge/information management - Configuration - Supply Chain Management...

  19. Marketplace Products

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Office of Enterprise Data and Analytics, within the Centers for Medicare aqnd Medicaid Services (CMS), has developed a set of information products and analytics...

  20. Lean production

    OpenAIRE

    Veselková, Jana

    2011-01-01

    The goal of this Bachelor's Thesis is to describe the general principles of lean production and afterwards apply these principles in a particular company. Due to the changing conditions on the world market is among companies growing concern about such innovative business systems. The theoretical part of this work deals with the general characteristics of lean production, including their history and focus on Toyota, as the originator of most lean systems. Mentioned are also the economic aspect...

  1. Productive Gaming

    OpenAIRE

    Brandstätter , Ulrich; Sommerer , Christa

    2016-01-01

    Part 4: Short Papers; International audience; Video games can be appropriated for productive purposes. Commercial games and game engines are often used for video productions, and game development companies provide development kits and modding environments to gaming communities and independent developers. With gamification, game principles are deployed in non-game contexts for benefits beyond pure entertainment. Most approaches are more focused on using games and their design elements rather t...

  2. Development of molten carbonate fuel cell technology at M-C Power Corporation

    Energy Technology Data Exchange (ETDEWEB)

    Dilger, D. [M-C Power Corp., Burr Ridge, IL (United States)

    1996-04-01

    M-C Power Corporation was founded in 1987 with the mission to further develop and subsequently commercialize molten carbonate fuel cells (MCFC). The technology chosen for commercialization was initially developed by the Institute of Gas technology (IGT). At the center of this MCFC technology is the Internally Manifolded Heat EXchange (IMHEX) separator plate design. The IMHEX technology design provides several functions within one component assembly. These functions include integrating the gas manifold structure into the fuel cell stack, separating the fuel gas stream from the oxidant gas stream, providing the required electrical contact between cells to achieve desired power output, and removing excess heat generated in the electrochemical process. Development of this MCFC technology from lab-scale sizes too a commercial area size of 1m{sup 2} has focused our efforts an demonstrating feasibility and evolutionary progress. The development effort will culminate in a proof-of-concept- 250kW power plant demonstration in 1996. The remainder of our commercialization program focuses upon lowering the costs associated with the MCFC power plant system in low production volumes.

  3. Biocidal Products and Borderline Products

    OpenAIRE

    Yılmaz, Abdullah

    2015-01-01

    Biocidal product is defined as preparations sold in ready form to use that contains one or more active substances and has control effect, movement restriction or destruction against harmful organisms which has harmful effect on products that people use or produce or animals or environment. These substances which are composed mostly chemicals and ease our lifes are used in increasingly every areas of our life on the other hand they carry variety of risks and threaten our lives. In terms of env...

  4. Environmental products

    International Nuclear Information System (INIS)

    1995-12-01

    This volume in the series of directories of Quebec organizations doing research and development involving biomass-based products or processes focused on environmental products and services. The objective of this, and other directories in the series, was to stimulate interaction, and hence more aggressive development, of products and processes capable of being commercialized, to facilitate interaction between those who possess and those who could utilize biomass resources, and in general, to encourage the development of biomass-based industries. A total of 83 organizations were included in standardized format, describing areas of research interest, principal areas of technological expertise, major equipment, personnel and name and address of contact person. In this volume fields of research interest included environmental audits, waste treatment, biodegradation, composting, oxidation, photodegradation, disinfection and combustion. tabs

  5. Uranium production

    International Nuclear Information System (INIS)

    Spriggs, M.

    1980-01-01

    The balance between uranium supply and demand is examined. Should new resources become necessary, some unconventional sources which could be considered include low-grade extensions to conventional deposits, certain types of intrusive rock, tuffs, and lake and sea-bed sediments. In addition there are large but very low grade deposits in carbonaceous shales, granites, and seawater. The possibility of recovery is discussed. Programmes of research into the feasibility of extraction of uranium from seawater, as a by-product from phosphoric acid production, and from copper leach solutions, are briefly discussed. Other possible sources are coal, old mine dumps and tailings, the latter being successfully exploited commercially in South Africa. The greatest constraints on increased development of U from lower grade sources are economics and environmental impact. It is concluded that apart from U as a by-product from phosphate, other sources are unlikely to contribute much to world requirements in the foreseeable future. (U.K.)

  6. Bottom production

    International Nuclear Information System (INIS)

    Baines, J.; Baranov, S.P.; Bartalini, P.; Bay, A.; Bouhova, E.; Cacciari, M.; Caner, A.; Coadou, Y.; Corti, G.; Damet, J.; Dell-Orso, R.; De Mello Neto, J.R.T.; Domenech, J.L.; Drollinger, V.; Eerola, P.; Ellis, N.; Epp, B.; Frixione, S.; Gadomski, S.; Gavrilenko, I.; Gennai, S.; George, S.; Ghete, V.M.; Guy, L.; Hasegawa, Y.; Iengo, P.; Jacholkowska, A.; Jones, R.; Kharchilava, A.; Kneringer, E.; Koppenburg, P.; Korsmo, H.; Kramer, M.; Labanca, N.; Lehto, M.; Maltoni, F.; Mangano, M.L.; Mele, S.; Nairz, A.M.; Nakada, T.; Nikitin, N.; Nisati, A.; Norrbin, E.; Palla, F.; Rizatdinova, F.; Robins, S.; Rousseau, D.; Sanchis-Lozano, M.A.; Shapiro, M.; Sherwood, P.; Smirnova, L.; Smizanska, M.; Starodumov, A.; Stepanov, N.; Vogt, R.

    2000-01-01

    In the context of the LHC experiments, the physics of bottom flavoured hadrons enters in different contexts. It can be used for QCD tests, it affects the possibilities of B decays studies, and it is an important source of background for several processes of interest. The physics of b production at hadron colliders has a rather long story, dating back to its first observation in the UA1 experiment. Subsequently, b production has been studied at the Tevatron. Besides the transverse momentum spectrum of a single b, it has also become possible, in recent time, to study correlations in the production characteristics of the b and the b. At the LHC new opportunities will be offered by the high statistics and the high energy reach. One expects to be able to study the transverse momentum spectrum at higher transverse momenta, and also to exploit the large statistics to perform more accurate studies of correlations

  7. Bottom production

    Energy Technology Data Exchange (ETDEWEB)

    Baines, J.; Baranov, S.P.; Bartalini, P.; Bay, A.; Bouhova, E.; Cacciari, M.; Caner, A.; Coadou, Y.; Corti, G.; Damet, J.; Dell-Orso, R.; De Mello Neto, J.R.T.; Domenech, J.L.; Drollinger, V.; Eerola, P.; Ellis, N.; Epp, B.; Frixione, S.; Gadomski, S.; Gavrilenko, I.; Gennai, S.; George, S.; Ghete, V.M.; Guy, L.; Hasegawa, Y.; Iengo, P.; Jacholkowska, A.; Jones, R.; Kharchilava, A.; Kneringer, E.; Koppenburg, P.; Korsmo, H.; Kramer, M.; Labanca, N.; Lehto, M.; Maltoni, F.; Mangano, M.L.; Mele, S.; Nairz, A.M.; Nakada, T.; Nikitin, N.; Nisati, A.; Norrbin, E.; Palla, F.; Rizatdinova, F.; Robins, S.; Rousseau, D.; Sanchis-Lozano, M.A.; Shapiro, M.; Sherwood, P.; Smirnova, L.; Smizanska, M.; Starodumov, A.; Stepanov, N.; Vogt, R.

    2000-03-15

    In the context of the LHC experiments, the physics of bottom flavoured hadrons enters in different contexts. It can be used for QCD tests, it affects the possibilities of B decays studies, and it is an important source of background for several processes of interest. The physics of b production at hadron colliders has a rather long story, dating back to its first observation in the UA1 experiment. Subsequently, b production has been studied at the Tevatron. Besides the transverse momentum spectrum of a single b, it has also become possible, in recent time, to study correlations in the production characteristics of the b and the b. At the LHC new opportunities will be offered by the high statistics and the high energy reach. One expects to be able to study the transverse momentum spectrum at higher transverse momenta, and also to exploit the large statistics to perform more accurate studies of correlations.

  8. Phytosanitary products

    International Nuclear Information System (INIS)

    1995-12-01

    One of a series of directories of Quebec universities, industrial and governmental agencies in Quebec actively involved in research and development of phytosanitary products or services derived from or associated with biomass products. This directory contained standardized entries for 79 organizations from the agriculture, forestry and environmental sectors, active in fields ranging from genetic engineering, fertilizers, crop diseases and pest management, forestry management, harvesting methods and bioconversion. Each entry provided information about major fields of research interest, principal technologies utilized, major equipment, personnel, and name and address of person to be contacted for further information. tabs

  9. Aluminium production

    International Nuclear Information System (INIS)

    Winter, B.; Ayers, J.; Sammer, G.

    2001-01-01

    Aluminium is the most important non-ferrous metal by quantity. Aluminium is produced by electrolysis of aluminium oxide (also known as alumina). Alumina is produced by refining bauxite. The quantity of primary and secondary aluminium production in ECE-countries between 1992 and 1998 is shown. The European aluminium industry employs approximately 200 000 employees. The annual aluminium production in the European Union was 3.58 million tonnes in 1994, of which 44 % was secondary aluminium. In 1996 3.96 million tonnes of aluminium were produced in the EU, of which 44 % was secondary aluminium. (author)

  10. Uranium production

    International Nuclear Information System (INIS)

    Jones, J.Q.

    1981-01-01

    The domestic uranium industry is in a state of stagflation. Costs continue to rise while the market for the product remains stagnant. During the last 12 months, curtailments and closures of mines and mills have eliminated over 5000 jobs in the industry, plus many more in those industries that furnish supplies and services. By January 1982, operations at four mills and the mines that furnish them ore will have been terminated. Other closures may follow, depending on cost trends, duration of current contracts, the degree to which mills have been amortized, the feasibility of placing mines on standby, the grade of the ore, and many other factors. Open-pit mines can be placed on standby without much difficulty, other than the possible cost of restoration before all the ore has been removed. There are a few small, dry, underground mines that could be mothballed; however, the major underground producers are wet sandstone mines that in most cases could not be reopened after a prolonged shutdown; mills can be mothballed for several years. Figure 8 shows the location of all the production centers in operation, as well as those that have operated or are on standby. Table 1 lists the same production centers plus those that have been deferred, showing nominal capacity of conventional mills in tons of ore per calendar day, and the industry production rate for those mills as of October 1, 1981

  11. Novolak Production

    Science.gov (United States)

    Aiba, Hiroshi

    Novolak resins are produced by reacting formaldehyde (30-55% concentration) with phenol under acidic conditions, with oxalic acid as the preferred catalyst and in special conditions, sulfuric acid. Depending on the batch size, all raw material components can be introduced into the reactor, or when there is an increase in the batch size as well as in the reactor volume, the reaction exotherm is controlled by a gradual addition of formaldehyde. Modern novolak production facilities are automated and programmed for reduced operational cost. A flow diagram of a general production line for the manufacture of novolak is shown. Recovery of the novolak is accomplished by the removal of water and devolatilization of crude novolak to molten, low-free phenol novolak resin which can be isolated as flake or pastille or dissolved in appropriate solvents. Novolak is stored either in a solid flake or pastille form or in solution. Most production is conducted under atmospheric conditions, but there are some recent, novel activities such as pressure in a hermetically-closed reactor reaching 0.1-10 MPa by using the heat of reaction without reflux to shorten reaction time, accelerating dehydration time by flash distillation, and providing economic benefit in the cost of novolak production.

  12. Product Configuration Systems and Productivity

    DEFF Research Database (Denmark)

    Pedersen, Jørgen Lindgaard; Edwards, Kasper

    2004-01-01

    Twelve companies have been interviewed with the purpose to get information about technical, economic and organisational matters in respect of Product Configuration Systems (PCS).Combinations of qualitative interviews and quantitative scoring have been used in ranking expected and realized results...

  13. Tequila production.

    Science.gov (United States)

    Cedeño, M

    1995-01-01

    Tequila is obtained from the distillation of fermented juice of agave plant, Agave tequilana, to which up to 49% (w/v) of an adjunct sugar, mainly from cane or corn, could be added. Agave plants require from 8 to 12 years to mature and during all this time cleaning, pest control, and slacken of land are required to produce an initial raw material with the appropriate chemical composition for tequila production. Production process comprises four steps: cooking to hydrolyze inulin into fructose, milling to extract the sugars, fermentation with a strain of Saccharomyces cerevisiae to convert the sugars into ethanol and organoleptic compounds, and, finally, a two-step distillation process. Maturation, if needed, is carried out in white oak barrels to obtain rested or aged tequila in 2 or 12 months, respectively.

  14. Lepton production

    CERN Multimedia

    2002-01-01

    This experiment aims to settle open questions in the hadronic production of electrons, muons and neutrinos. Prominent among these are $e/\\mu$ universality, the contribution of charm decay to lepton pair production, and the "anomalous" low mass pairs.\\\\ The experimental design aims to optimize the combination of:\\\\- electron identification\\\\ - muon identification \\\\ - missing energy measurement for neutrinos \\\\ - vertex identification (for $\\tau \\simeq \\tau_{charm}$). \\\\ \\\\ The major components of the apparatus are shown in the figure. In the vertex region a proton beam of transverse size $\\simeq 50 \\mu$ impinges on a beryllium target of diameter $50 \\mu$, and high precision tracking in the vertex region is achieved by silicon strip detectors. Charged particle momenta are measured using a dipole magnet and high resolution drift chambers. Electrons are identified by the combination of the transition radiation detector and the finely segmented front section of the Uranium/Liquid Argon calorimeter. Essentially t...

  15. Product customization

    DEFF Research Database (Denmark)

    Lueg, Rainer

    2015-01-01

    This case study deals with the extension, customization, and profitability of two new product lines of a bicycle manufacturer. It can serve both as a discussion basis in class as well as an exam for advanced Master students in management, marketing, and ccounting. The case illustrates how variance...... application of financial analysis can lead to dysfunctional decisions that run counter to a company’s business model....

  16. Isotope production

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, Dewi M.

    1995-07-15

    Some 2 0% of patients using radiopharmaceuticals receive injections of materials produced by cyclotrons. There are over 200 cyclotrons worldwide; around 35 are operated by commercial companies solely for the production of radio-pharmaceuticals with another 25 accelerators producing medically useful isotopes. These neutron-deficient isotopes are usually produced by proton bombardment. All commonly used medical isotopes can be generated by 'compact' cyclotrons with energies up to 40 MeV and beam intensities in the range 50 to 400 microamps. Specially designed target systems contain gram-quantities of highly enriched stable isotopes as starting materials. The targets can accommodate the high power densities of the proton beams and are designed for automated remote handling. The complete manufacturing cycle includes large-scale target production, isotope generation by cyclotron beam bombardment, radio-chemical extraction, pharmaceutical dispensing, raw material recovery, and labelling/packaging prior to the rapid delivery of these short-lived products. All these manufacturing steps adhere to the pharmaceutical industry standards of Good Manufacturing Practice (GMP). Unlike research accelerators, commercial cyclotrons are customized 'compact' machines usually supplied by specialist companies such as IBA (Belgium), EBCO (Canada) or Scanditronix (Sweden). The design criteria for these commercial cyclotrons are - small magnet dimensions, power-efficient operation of magnet and radiofrequency systems, high intensity extracted proton beams, well defined beam size and automated computer control. Performance requirements include rapid startup and shutdown, high reliability to support the daily production of short-lived isotopes and low maintenance to minimize the radiation dose to personnel. In 1987 a major step forward in meeting these exacting industrial requirements came when IBA, together with the University of Louvain-La-Neuve in Belgium, developed the Cyclone-30

  17. Diboson production

    Directory of Open Access Journals (Sweden)

    Evans D.L.

    2013-05-01

    Full Text Available Measurements of diboson production cross sections in pp collisions at the LHC at a centre of mass energy √s = 7 and 8 TeV, and in pp̅ collisions at the Tevatron at √s = 1.96 TeV are reviewed and compared with standard model predictions. Limits on charged and neutral anomalous triple gauge couplings extracted from the selected diboson event samples are also compared.

  18. Product design - Molecules, devices, functional products, and formulated products

    DEFF Research Database (Denmark)

    Gani, Rafiqul; Ng, Ka M.

    2015-01-01

    Chemical product design is a multidisciplinary and diverse subject. This article provides an overview of product design while focusing on product conceptualization. Four product types are considered - molecular products, formulated products, devices and functional products. For molecular products......, computer-aided design tools are used to predict the physicochemical properties of single molecules and blends. For formulated products, an integrated experiment-modeling approach is used to generate the formula with the specified product attributes. For devices and functional products, conceptual product...... design is carried out by modeling the product based on thermodynamics, kinetics and transport processes, by performing experiments, and by decision making based on rule-based methods The results are product specifications in terms of the type of ingredients, composition, and the structure, form, shape...

  19. New Product

    Institute of Scientific and Technical Information of China (English)

    铭瑄

    2012-01-01

    Double Coin Holdings Launch New OTR Tire REM-15 With the increase of the demand for large-scale bulldozer in American market, Double Coin Group Co., Ltd. developed the Double Coin REM-15 OTR tire. This product is applicable for large-scale loader and bulldozer. The most remarkable characteristic is that it has good energy-saving performance and durability with low operating cost while the performances of tires aren't lowered. The new REM-15 is currently offered in the 17.5R25 size, which will be expanded to larger sizes in the future.

  20. production lines

    Directory of Open Access Journals (Sweden)

    Jingshan Li

    2000-01-01

    Full Text Available In this work, serial production lines with finished goods buffers operating in the pull regime are considered. The machines are assumed to obey Bernoulli reliability model. The problem of satisfying customers demand is addressed. The level of demand satisfaction is quantified by the due-time performance (DTP, which is defined as the probability to ship to the customer a required number of parts during a fixed time interval. Within this scenario, the definitions of DTP bottlenecks are introduced and a method for their identification is developed.

  1. Bottom Production

    CERN Document Server

    Nason, P.; Schneider, O.; Tartarelli, G.F.; Vikas, P.; Baines, J.; Baranov, S.P.; Bartalini, P.; Bay, A.; Bouhova, E.; Cacciari, M.; Caner, A.; Coadou, Y.; Corti, G.; Damet, J.; Dell'Orso, R.; De Mello Neto, J.R.T.; Domenech, J.L.; Drollinger, V.; Eerola, P.; Ellis, N.; Epp, B.; Frixione, S.; Gadomski, S.; Gavrilenko, I.; Gennai, S.; George, S.; Ghete, V.M.; Guy, L.; Hasegawa, Y.; Iengo, P.; Jacholkowska, A.; Jones, R.; Kharchilava, A.; Kneringer, E.; Koppenburg, P.; Korsmo, H.; Kramer, M.; Labanca, N.; Lehto, M.; Maltoni, F.; Mangano, Michelangelo L.; Mele, S.; Nairz, A.M.; Nakada, T.; Nikitin, N.; Nisati, A.; Norrbin, E.; Palla, F.; Rizatdinova, F.; Robins, S.; Rousseau, D.; Sanchis-Lozano, M.A.; Shapiro, M.; Sherwood, P.; Smirnova, L.; Smizanska, M.; Starodumov, A.; Stepanov, N.; Vogt, R.

    2000-01-01

    We review the prospects for bottom production physics at the LHC. Members of the working group who has contributed to this document are: J. Baines, S.P. Baranov, P. Bartalini, A. Bay, E. Bouhova, M. Cacciari, A. Caner, Y. Coadou, G. Corti, J. Damet, R. Dell'Orso, J.R.T. De Mello Neto, J.L. Domenech, V. Drollinger, P. Eerola, N. Ellis, B. Epp, S. Frixione, S. Gadomski, I. Gavrilenko, S. Gennai, S. George, V.M. Ghete, L. Guy, Y. Hasegawa, P. Iengo, A. Jacholkowska, R. Jones, A. Kharchilava, E. Kneringer, P. Koppenburg, H. Korsmo, M. Kraemer, N. Labanca, M. Lehto, F. Maltoni, M.L. Mangano, S. Mele, A.M. Nairz, T. Nakada, N. Nikitin, A. Nisati, E. Norrbin, F. Palla, F. Rizatdinova, S. Robins, D. Rousseau, M.A. Sanchis-Lozano, M. Shapiro, P. Sherwood, L. Smirnova, M. Smizanska, A. Starodumov, N. Stepanov, R. Vogt

  2. Irradiation of liquid egg, frozen egg, powdered egg, egg yolk and white of egg: reducing the population of Salmonella enteritidis and sensory aspects and physico-chemical;Irradiacao de ovo liquido, congelado e ovo, gema e clara em po: reducao da populacao de Salmonella enteritidis e aspectos sensoriais e fisico-quimicos

    Energy Technology Data Exchange (ETDEWEB)

    Froehlich, Angela

    2004-07-01

    Eggs and their products have been incriminated in foodborne disease outbreaks due to Salmonella enteritidis contamination. Irradiation is a food preservation technology that could be applied to minimize the problem. The aim of this study was to determine the effect of irradiation in liquid and frozen egg as well as in powdered egg, egg yolk and egg white spiked with Salmonella enteritidis. Spiked samples of liquid egg, egg white and egg yolk were exposed to 0,5; 1,0; 1,5; 2,0; 2,5; 3,0 kGy and spiked samples of frozen and powdered egg were exposed to 0,5; 1,0; 1,5; 2,0; 2,5; 3,0; 3,5 e 4,0 kGy. Raw odour, cooked odour and taste of non inoculated and irradiated samples and non irradiated samples of egg and egg products were analysed by a trained penal. Viscosity and lipid oxidation (malonaldehyde concentration) were also determined. Doses of 2,0; 3,0; 3,5; 3,0 e 3,5 kGy reduced in 5 log the population of S. Enteritidis in liquid and frozen egg, powdered egg yolk, egg white and egg, respectively, with moderate alterations in relation to non irradiated samples detected by the trained penal. Viscosity and lipid oxidation in the powdered products, however, showed more intense alterations. Therefore, irradiation can be considered a feasible process for liquid and frozen egg while when applied to powdered products it should be considered the type of food product to which they will be added due to alterations in viscosity. (author)

  3. Production management (1976)

    International Nuclear Information System (INIS)

    Lee, Sun Ryong

    1976-03-01

    This book introduces production management theory, which gives descriptions of production and system, systems approach, development of production management, Taylor system, Ford system, types of production system, measuring ingredients model of production management, decision of production management, selection of production facilities, arrangement of facilities design of work method and task, work measure system, demanding fore casting, production quality system and credibility system.

  4. From Product Models to Product State Models

    DEFF Research Database (Denmark)

    Larsen, Michael Holm

    1999-01-01

    A well-known technology designed to handle product data is Product Models. Product Models are in their current form not able to handle all types of product state information. Hence, the concept of a Product State Model (PSM) is proposed. The PSM and in particular how to model a PSM is the Research...

  5. Studies of some physical-mechanical and chemical property in organic waste to use for biogas production in Cuba

    International Nuclear Information System (INIS)

    Martinez Hernández, Carlos M.; Oechsner, Hans; Brulé, Mathieu; Marañon Maison, Elena

    2014-01-01

    The work approaches the study of some physical-mechanical and chemical properties of agricultural organic residuals which can be used in the biogas production in Cuba´s plants production, using their co-fermentation. It has also been necessary to collect agricultural biomass, canteen waste, influent and effluents of a biogas plant Nina Bonita) next to Santa Clara city, Cuba, for their later analysis. the investigated biomass samples (sorghum.49V-96, sorghum-132 R, sunflower JE-94, cassava, corn, sweet potato skin, bread, potatoes and peanut skin); as well as the influent and effluents of the investigated biogas plant were analyzed in some laboratories belonging to the Central University of Las Villas. Other analyses were done in the biogas lab at Hohenheim University. The maximum value of specifies methane yield achieved was with the sunflower JE-94 (0.393 m3/kg VS), while the minimum value was reached with the peanut shell (0.095 m3/Kg VS).The main objective of the work consists on determining some of the physical-mechanical and chemical properties like carbon nitrogen ratio (C/N), specific methane production (m3/kg VS), total solid (TS), organic total solid (oTS), alkalinity (pH) and volatile solid (VS) in agricultural organic residuals and canteen waste, which can be used for the production of biogas under co-fermentation with animal manure under Cuban conditions. In order to do this, we developed some experiments to syringes, small and real scale. (author)

  6. Tobacco Products Production and Operations Reports

    Data.gov (United States)

    Department of the Treasury — Monthly statistical reports on tobacco products production and operations. Data for Tobacco Statistical Release is derived directly from the Report – Manufacturer of...

  7. El sector productivo The productive sector

    Directory of Open Access Journals (Sweden)

    Encarna Santolaria

    2004-05-01

    Full Text Available El crecimiento del sector servicios en detrimento del sector primario, la flexibilidad del mercado laboral y la progresiva incorporación de la mujer a dicho mercado son los cambios más destacados del sector productivo español en los últimos 25 años. Las mujeres en España presentan tasas de desempleo, trabajo temporal y a tiempo parcial mucho mayores que los hombres. Además, las condiciones de acceso al mercado de trabajo y las condiciones en las que éste se desempeña están también muy relacionadas con la clase social. Las mujeres cubren la escasez de servicios públicos destinados al cuidado de las criaturas pequeñas y de las personas mayores o dependientes, y realizan una labor de cuidadoras informales sin reconocimiento social, lo cual les impide el acceso a un puesto de trabajo o su mantenimiento y limita de forma decisiva las posibilidades de desarrollo y progreso profesional. Todo ello indica una clara diferencia con respecto a los hombres en cuanto a la frecuencia de contratos temporales y de tiempo parcial, así como en la segregación laboral, tanto horizontal como vertical. Estos aspectos de segregación son más evidentes en las mujeres de clases sociales menos privilegiadas, en las que se concentran las peores condiciones de acceso al mercado laboral y de trabajo. En España es imprescindible llevar a cabo políticas que ofrezcan servicios que permitan compatibilizar la vida laboral y familiar en condiciones de mayor equidad, tanto en razón de género como de clase social.In the last 25 years, the production sector in Spain has undergone important changes. Among these changes, the important growth of the services sector at the expense of the primary sector, the increasing flexibility of the labour market, and the rise in the female workforce could be considered as the most relevant ones. Spanish women have higher rates of unemployment, temporary jobs and part time contracts than Spanish men. Moreover, job access and work

  8. Innovation in Product Development

    DEFF Research Database (Denmark)

    McAloone, Tim C.; Restrepo-Giraldo, John Dairo

    2005-01-01

    The course on Innovation in Product Development attempts to identify and understand the nature of innovation and product development and their important factors. The course takes both a theoretical and a practical approach and employs a mix of lectures, project work and group discussion. Format...... insight. Course content The following aspects of innovation in product development are considered: - Humans and products - Needs and products - Product life - Teams creating products - Products creating business - Product development models - Organising product development - Product development tools...... - The future of product development....

  9. IMHEX{sup {reg_sign}} fuel cells progress toward commercialization

    Energy Technology Data Exchange (ETDEWEB)

    Scroppo, J.A.; Laurens, R.M.; Petraglia, V.J.

    1995-12-31

    The overall goal of M-C Power is the development and subsequent commercialization of Molten Carbonate Fuel Cell (MCFC) stacks. More specifically, MCFC`s Manifolded Heat Exchange (IMHEX{sup {reg_sign}}) plate design created by the Institute of Technology. In order to achieve the aforementioned goal, M-C Power assembled a formidable team of industry leaders. This group, refered to as the (IHMEX{sup {reg_sign}}) Team, has developed a strategy to move decisively through the stages of Technology Development and Product Design and Improvement through commercialization. This paper is to review the status of the overall commercialization program and activities. It will also provide an overview of the market entry product. Furthermore, we will evaluate the opportunities and benefits this product brings to a competitive power industry.

  10. SaferProducts API

    Data.gov (United States)

    US Consumer Product Safety Commission — On March 11, 2011, the U.S. Consumer Product Safety Commission launched SaferProducts.gov. This site hosts the agency's new Publicly Available Consumer Product...

  11. Product and labour market regulations, production prices, wages and productivity

    NARCIS (Netherlands)

    Cette, G.; Lopez, J.; Mairesse, J.

    2015-01-01

    This study is an attempt to evaluate the effects of product and labour market regulations on industry productivity through their various impacts on changes in production prices and wages. In a first stage, the estimation of a regression equation on an industry*country panel, with controls for

  12. Production management (2000)

    International Nuclear Information System (INIS)

    Jung, Chung Yeong

    2000-08-01

    This book includes basic concept of production management, production system, strategy and mission of production, decision of production management, operation of decision making, life cycle of items and development, value of productions, design for reliability of productions, equipment layout and manufacturing process, quantitative forecast, schedule plan, inventory system, concept, input and output of MRP, Montekalo simulation, quality management, and automation system.

  13. Product Service Systems

    DEFF Research Database (Denmark)

    Departing from Product Development models based on physical artefacts. Moving towards integrated Product Development and System Operations models suited Product/Service-systems......Departing from Product Development models based on physical artefacts. Moving towards integrated Product Development and System Operations models suited Product/Service-systems...

  14. Studies on sulfur poisoning and development of advanced anodic materials for waste-to-energy fuel cells applications

    Science.gov (United States)

    Zaza, Fabio; Paoletti, Claudia; LoPresti, Roberto; Simonetti, Elisabetta; Pasquali, Mauro

    Biomass is the renewable energy source with the most potential penetration in energy market for its positive environmental and socio-economic consequences: biomass live cycles for energy production is carbon neutral; energy crops promote alternative and productive utilizations of rural sites creating new economic opportunities; bioenergy productions promote local energy independence and global energy security defined as availability of energy resource supply. Different technologies are currently available for energy production from biomass, but a key role is played by fuel cells which have both low environmental impacts and high efficiencies. High temperature fuel cells, such as molten carbonate fuel cells (MCFC), are particularly suitable for bioenergy production because it can be directly fed with biogas: in fact, among its principal constituents, methane can be transformed to hydrogen by internal reforming; carbon dioxide is a safe diluent; carbon monoxide is not a poison, but both a fuel, because it can be discharged at the anode, and a hydrogen supplier, because it can produce hydrogen via the water-gas shift reaction. However, the utilization of biomass derived fuels in MCFC presents different problems not yet solved, such as the poisoning of the anode due to byproducts of biofuel chemical processing. The chemical compound with the major negative effects on cell performances is hydrogen sulfide. It reacts with nickel, the main anodic constituent, forming sulfides and blocking catalytic sites for electrode reactions. The aim of this work is to study the hydrogen sulfide effects on MCFC performances for defining the poisoning mechanisms of conventional nickel-based anode, recommending selection criteria of sulfur-tolerant materials, and selecting advanced anodes for MCFC fed with biogas.

  15. 77 FR 45373 - Certain Semiconductor Chips and Products Containing Same; Termination of the Investigation With a...

    Science.gov (United States)

    2012-07-31

    ... Corporation of Milpitas, California (``LSI''); Mediatek Inc. of Hsin-Chu, Taiwan (``Mediatek''); NVIDIA Corp. of Santa Clara, California (``NVIDIA''); STMicroelectronics N.V. of Geneva, Switzerland; and... respondents on the basis of Rambus's settlements with Broadcom, Freescale, MediaTek, and NVIDIA. LSI and...

  16. Production monitoring system for understanding product robustness

    DEFF Research Database (Denmark)

    Boorla, Srinivasa Murthy; Howard, Thomas J.

    2016-01-01

    study is used to demonstrate how the monitoring system can be used to efficiently guide corrective action to improve product performance. It is claimed that the monitoring system can be used to dramatically cut the time taken to identify, planand execute corrective action related to typical quality......In the current quality paradigm, the performance of a product is kept within specification by ensuring that its parts are within specification. Product performance is then validated after final assembly. However, this does not control how robust the product performance is, i.e. how much...... it will vary between the specification limits. In this paper, a model for predicting product performance is proposed, taking into account design, assembly and process parameters live from production. This empowers production to maintain final product performance, instead of part quality. The PRECI‐IN case...

  17. Productivity and Performance Measurement

    DEFF Research Database (Denmark)

    Hald, Kim Sundtoft; Spring, Martin

    This study explores conceptually how performance measurement as discussed in the literature, enables or constrains the ability to manage and improve productivity. It uses an inter-disciplinary literature review to identify five areas of concern relating productivity accounting to the ability...... to improve productivity: “Productivity representation”; “productivity incentives”, “productivity intervention”; “productivity trade-off or synergy” and “productivity strategy and context”. The paper discusses these areas of concern and expands our knowledge of how productivity and performance measurement...

  18. Product Structure, the Heart of Product Definition

    Science.gov (United States)

    DeHoog, C., Jr.

    1999-01-01

    This paper describes the LMMSS Product Definition System (PDS) philosophy and approach were the use of each item parts document or software can be traced to a specific end item (EI) serial/tail number of the product. It explains why a part-oriented approach to data organization and configuration management is required. The definition of part-oriented is that all appropriate product definition data products will be collected. Referenced and managed by their linkage/relationship to parts/items, The paper will touch upon how LMMSS store/controls product definition information under each project's top product designator in a two tiered approach. One tier for each product end item and another tier which contain/controls listings of drawings, documents. Specifications and standards that are required for hardware item definition.

  19. Heavy Flavour Production

    CERN Document Server

    Nason, Paolo; Ridolfi, Giovanni

    1995-01-01

    We review the status of heavy flavour production in QCD. Comparison of experimental and theoretical results for top and bottom production are given. Selected topics in charm production are also discussed.

  20. Animal Product Safety Information

    Science.gov (United States)

    ... Home Animal & Veterinary Safety & Health Product Safety Information Product Safety Information Share Tweet Linkedin Pin it More ... to report adverse experiences with veterinary drugs. Additional Product Information Questions and Answers: Evanger’s Dog and Cat ...

  1. Urinary incontinence products

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/003973.htm Urinary incontinence products To use the sharing features on this ... There are many products to help you manage urinary incontinence . You can decide which product to choose based ...

  2. COTTAGE CHEESE PRODUCTS FUNCTIONALITY

    Directory of Open Access Journals (Sweden)

    L. V. Golubeva

    2015-01-01

    Full Text Available Cottage cheese products holds a significant place among the dairy and milk-containing products. The range of products includes cheese: cheese, pastes, creams, cakes, etc. Such diversity can be attributed to their popularity among the population and benefit brought by the body from regular use. Curd protein is much better and easier to digest by the body than protein fish, meat or milk. Rich curd products lysine and methionine. Minerals contained in cheese products have a positive effect on bone formation and structure of tissues. The composition of curd products, in addition to cheese and dairy ingredients may include non-dairy ingredients origin. Today, for the production of cheese products use the most advanced technologies to further enrich its structure and significantly improve the nutritional value. Pine nut is widely used in the manufacture of many dairy products. But, in most cases, the production of dairy products as a filler used pine nut cake, which deprives the finished product valuable cedar oil. The authors proposed a technology for producing curd product with the addition of pine nuts and honey (pine nuts and fructose. Compatible with cream cheese filling insertion determined sensory organoleptic point scale. he optimum dosage of components: pine nuts – 5 %, honey – 10 % fructose – 7 %. Technological process of cottage cheese product is different from the traditional operations training components and their introduction into the finished cheese. Identify indicators of quality of the new product. Production of curd products thus expanding the range of dairy products functional orientation.

  3. STRATEGIES FOR INCREASING PRODUCTIVITY IN PRODUCTION SYSTEMS

    Directory of Open Access Journals (Sweden)

    Diego Pacheco

    2014-05-01

    Full Text Available The main objective of this article is to point a set of practical strategies that can be adopted to increase the capacity of constraints resources on production systems, when the constraint is inside the factory and not is in the market. To serve this purpose will be presented strategies based on best practices of the Theory of Constraints, Lean Manufacturing and Total Productive Maintenance. This article also presents the mains tools for the deployment of these methodologies. The survey results have provided an objective set of practical strategy that can be used to increase the capacity and productivity of production systems according to the needs of each manufacturing system.

  4. PDT (Product Data Technology), Production and Society

    DEFF Research Database (Denmark)

    Vesterager, Johan

    1997-01-01

    Information and communication technology (ICT) constitute a genuine technical revolution by enabling a dynamic and flexible support or automation of knowledge and information work. Bearing in mind that products are frozen knowledge, ICT as known will change the way we produce products dramatically....... The use of ICT in engineering of products constitutes product data technology (PDT).This paper presents a a basic platform for an understanding the ongoing revolution with focus on the PDT-area taking outset in the fundamental elements of knowledge and information work: creation, transformation...

  5. Animal Production Research Advances

    African Journals Online (AJOL)

    Animal Production Research Advances is a peer-review journal established expressly to promote the production of all animal species utilized as food. The journal has an international scope and is intended for professionals in animal production and related sciences. We solicit contributions from animal production and ...

  6. Intelligent products : A survey

    NARCIS (Netherlands)

    Meyer, G.G.; Främling, K.; Holmström, J.

    This paper presents an overview of the field of Intelligent Products. As Intelligent Products have many facets, this paper is mainly focused on the concept behind Intelligent Products, the technical foundations, and the achievable practical goals of Intelligent Products. A novel classification of

  7. Making Product Customization Profitable

    DEFF Research Database (Denmark)

    Mortensen, Niels Henrik; Hvam, Lars; Haug, Anders

    2010-01-01

    The main result presented in this paper is the Framework for Product Family Master Plan. This framework supports the identification of a product architecture for companies that customize products and services. The framework has five coherent aspects, the market, product assortment, supply...

  8. Consumer Product Category Database

    Science.gov (United States)

    The Chemical and Product Categories database (CPCat) catalogs the use of over 40,000 chemicals and their presence in different consumer products. The chemical use information is compiled from multiple sources while product information is gathered from publicly available Material Safety Data Sheets (MSDS). EPA researchers are evaluating the possibility of expanding the database with additional product and use information.

  9. Molten carbonate fuel cells fed with biogas: combating H(2)S.

    Science.gov (United States)

    Ciccoli, R; Cigolotti, V; Lo Presti, R; Massi, E; McPhail, S J; Monteleone, G; Moreno, A; Naticchioni, V; Paoletti, C; Simonetti, E; Zaza, F

    2010-06-01

    The use of biomass and waste to produce alternative fuels, due to environmental and energy security reasons, is a high-quality solution especially when integrated with high efficiency fuel cell applications. In this article we look into the coupling of an anaerobic digestion process of organic residues to electrochemical conversion to electricity and heat through a molten carbonate fuel cell (MCFC). In particular the pathway of the exceedingly harmful compound hydrogen sulphide (H(2)S) in these phases is analysed. Hydrogen sulphide production in the biogas is strongly interrelated with methane and/or hydrogen yield, as well as with operating conditions like temperature and pH. When present in the produced biogas, this compound has multiple negative effects on the performance and durability of an MCFC. Therefore, there are important issues of integration to be solved. Three general approaches to solve the sulphur problem in the MCFC are possible. The first is to prevent the formation of hydrogen sulphide at the source: favouring conditions that inhibit its production during fermentation. Secondly, to identify the sulphur tolerance levels of the fuel cell components currently in use and develop sulphur-tolerant components that show long-term electrochemical performance and corrosion stability. The third approach is to remove the generated sulphur species to very low levels before the gas enters the fuel cell. Copyright 2010 Elsevier Ltd. All rights reserved.

  10. Ergonomic Product Design 21

    International Nuclear Information System (INIS)

    Kwon, Yeong Guk

    1996-09-01

    This book explains basic of ergonomic product design with human engineering, image engineering and strategy of that design, ergonomic industrial design, which includes product design to access the human engineering in development of new product and customer satisfaction, application technology of image engineering, industrial design of human engineering item and strategy of human engineering, a good ergonomic design. It also tells of examples of convenient design for human such as hardware product and software product in automobile, telephones for ergonomic product in the future, new goods and new technology, ergonomic product in house and office, and computers and robots in the future.

  11. Product Family Assessment

    DEFF Research Database (Denmark)

    Kvist, Morten

    their focus from single products to entire product families and try to incorporate the development of product variety into a future product family. The key is to create fit between the product design and production setup. The challenge of understanding this fit and modelling dispositional relations between...... and on the ideas of lean production, plus experiences from the industrial collaboration. The idea of waste from the lean philosophy is brought into a product variety context, and discussed in relation to product development. Verification of the model has been carried out in an industrial setting at Danfoss......This thesis reports the results of a PhD project from the Technical University of Denmark. The research has been carried out in a collaborative project with the Danish company Danfoss Automatic Controls. In the global market companies are struggling to meet customers’ expectation of products...

  12. Designing Product Families

    DEFF Research Database (Denmark)

    Pedersen, Per Erik Elgård; Miller, Thomas Dedenroth

    1998-01-01

    Manufacturing companies that operate with products aimed at different market segments and applications are experiencing an increasing demand from customers who expect products to be tailored to their exact needs rather than accepting general products based on average customer needs. This trend ha......: Variety, Design Principles, and Product Maturity.......Manufacturing companies that operate with products aimed at different market segments and applications are experiencing an increasing demand from customers who expect products to be tailored to their exact needs rather than accepting general products based on average customer needs. This trend has...... led to a new business paradigm, "mass customization", where companies strive to provide highly customized products while still maintaining the efficiency of the classical mass production enterprise. One of the key factors in mass customization has been efficient use of product platforms...

  13. Production Function Geometry with "Knightian" Total Product

    Science.gov (United States)

    Truett, Dale B.; Truett, Lila J.

    2007-01-01

    Authors of principles and price theory textbooks generally illustrate short-run production using a total product curve that displays first increasing and then diminishing marginal returns to employment of the variable input(s). Although it seems reasonable that a temporary range of increasing returns to variable inputs will likely occur as…

  14. Probiotic fermented dairy products

    OpenAIRE

    Adnan Tamime; Rajka Božanić; Irena Rogelj

    2003-01-01

    Fermented dairy products are the most popular vehicle used in theindustry for the implantation of the probiotic microflora in humans. Therefore this paper provides an overview of new knowledge on probiotic fermented dairy products. It involves historical developments, commercial probiotic microorganisms and products, and their therapeutic properties, possibilities of quality improvement of different types of newly developed fermented dairy products together with fermented goat’s milk products.

  15. Software product quality measurement

    OpenAIRE

    Godliauskas, Eimantas

    2016-01-01

    This paper analyses Ruby product quality measures, suggesting three new measures for Ruby product quality measurement tool Rubocop to measure Ruby product quality characteristics defined in ISO 2502n standard series. This paper consists of four main chapters. The first chapter gives a brief view of software product quality and software product quality measurement. The second chapter analyses object oriented quality measures. The third chapter gives a brief view of the most popular Ruby qualit...

  16. Fuzzy-based failure mode and effect analysis (FMEA) of a hybrid molten carbonate fuel cell (MCFC) and gas turbine system for marine propulsion

    Science.gov (United States)

    Ahn, Junkeon; Noh, Yeelyong; Park, Sung Ho; Choi, Byung Il; Chang, Daejun

    2017-10-01

    This study proposes a fuzzy-based FMEA (failure mode and effect analysis) for a hybrid molten carbonate fuel cell and gas turbine system for liquefied hydrogen tankers. An FMEA-based regulatory framework is adopted to analyze the non-conventional propulsion system and to understand the risk picture of the system. Since the participants of the FMEA rely on their subjective and qualitative experiences, the conventional FMEA used for identifying failures that affect system performance inevitably involves inherent uncertainties. A fuzzy-based FMEA is introduced to express such uncertainties appropriately and to provide flexible access to a risk picture for a new system using fuzzy modeling. The hybrid system has 35 components and has 70 potential failure modes, respectively. Significant failure modes occur in the fuel cell stack and rotary machine. The fuzzy risk priority number is used to validate the crisp risk priority number in the FMEA.

  17. Identification of yeasts Isolated from processed and frozen cocoa (Theobroma cacao pulp for wine production

    Directory of Open Access Journals (Sweden)

    Rita de Cássia Trindade

    1999-01-01

    Full Text Available The alternative use of cocoa (Theobroma cacao for wine production was tested. The pulp samples, obtained from Formosa farm, Itacaré, Brazil, were diluted, homogenized and inoculated on Sabouraud dextrose agar medium (SDA and incubated at 28º C for 5-8 days. Selected colonies were tested for the ability to ferment cocoa pulp and divided into fermentative, non-fermentative and weak/late fermentative species. Isolates characterized as fermentative were further tested in a small-scale wine production plant and identified. Species from the genus Brettanomyces constituted the main fermentative yeasts, with the exception of two Kloeckera apis samples. The final wine product was normally pale or clear, making clarification unnecessary, and with a sweet or dry pleasant flavor. The predominance of Brettanomyces species in cocoa pulp indicated its ecological importance in this environment and pointed to an active role of Brettanomyces in the deterioration process of the processed cocoa pulp.O uso alternativo de cacau (Theobroma cacao para produção de vinho foi testado. A polpa de cacau foi obtida da Fazenda Formosa, Itacaré, Brasil. As amostras de polpa foram diluídas, homogeneizadas e inoculadas em meio de Sabouraud dextrose e incubadas a 28°C por 5-8 dias. Colônias selecionadas foram testadas quanto à habilidade de fermentar a polpa de cacau e divididas em fermentadoras, não-fermentadoras e fermentadoras lentas. As amostras fermentadoras foram identificadas e testadas para produção de vinho de cacau em escala piloto. A maioria das amostras fermentadoras pertencem ao gênero Brettanomyces, com exceção de duas amostras de Kloeckera apis. O vinho obtido apresentou coloração fraca e clara, tornando a clarificação desnecessária, além de sabor doce e agradável. A predominância de espécies de Brettanomyces na polpa de cacau poderia indicar sua importância ecológica neste ambiente e sugere uma participação ativa dessas leveduras nos

  18. Efficiency and productivity analysis of the interstate bus transportation industry in Brazil

    Directory of Open Access Journals (Sweden)

    Antonio G.N. Novaes

    2010-08-01

    Full Text Available Productivity analysis is an important policy making and managerial control tool for assessing the degree to which inputs are utilized in the process of obtaining desired outputs. Data Envelopment Analysis (DEA is a non-parametric method based on piecewise linear frontiers estimated with the aid of mathematical programming techniques and used, in this paper, to investigate technical, scale and managerial efficiencies associated with interstate bus companies in Brazil (ISBT. Data has been obtained from the web-site of the Brazilian National Agency of Land Transportation (ANTT. Since production factors in the application are constrained by technical and operational reasons, weight restrictions were introduced into the DEA models. The analysis has shown three groups of non-efficient bus firms, with clear differences in productivity. The relative managerial efficiencies of the firms in the non-efficient groups were also computed and analyzed. Finally, an example of benchmarking a non-efficient firm with DEA is presented.A análise de produtividade é ferramenta importante para a tomada de decisão e para a gestão de organizações, possibilitando avaliar os efeitos dos inputs na obtenção de níveis desejados de outputs. A Análise Envoltória de Dados (DEA é um método não paramétrico baseado em fronteiras lineares por partes ajustadas através de programação matemática e utilizada para analisar as eficiências técnica, de escala e de gestão de empresas de ônibus que operam nas ligações interestaduais no Brasil (ISBT. Os dados foram obtidos no web-site da Agência Nacional de Transportes Terrestres (ANTT. Como os fatores de produção são restritos por razões técnicas e operacionais, restrições de pesos foram introduzidas nos modelos. A análise mostrou três grupos de empresas não eficientes, com claras diferenças de produtividade. Também são calculadas as eficiências de gestão relativas a esses três grupos. Finalmente

  19. Fission products collecting devices

    International Nuclear Information System (INIS)

    Matsumoto, Hiroshi

    1979-01-01

    Purpose: To enable fission products trap with no contamination to coolants and cover gas by the provision of a fission products trap above the upper part of a nuclear power plant. Constitution: Upon fuel failures in a reactor core, nuclear fission products leak into coolants and move along the flow of the coolants to the coolants above the reactor core. The fission products are collected in a trap container and guided along a pipeline into fission products detector. The fission products detector monitors the concentration of the fission products and opens the downstream valve of the detector when a predetermined concentration of the fission products is detected to introduce the fission products into a waste gas processing device and release them through the exhaust pipe. (Seki, T.)

  20. A senior manager with a knowledge management portfolio: the Santa Clara County experience.

    Science.gov (United States)

    Lindberg, Arley

    2012-01-01

    The agency director sought to create a systematically coordinated department that utilizes knowledge management strategies to promote evidence-informed practice. In his view, the organization was not providing needed information or organizational supports for practitioners to use knowledge effectively. To address this issue, he created a Director of Development and Operational Planning (DDOP) position with the responsibility to build structures and facilitate processes that support knowledge management. The DDOP oversees research and planning, government relations, legislative development and support, Board of Supervisors communications, staff development and training, community contracts, public information and in-house communication. The DDOP is reorganizing units under her supervision to create a knowledge management matrix that will implement new knowledge sharing strategies related to evaluation, contracts, legislation, organizational development, policy and planning, and staff development. The case study describes challenges and strategies related to: government regulations, size and complexity of the agency, staff resistance, and the developmental nature of the process. Copyright © Taylor & Francis Group, LLC

  1. Predicting pear (cv. Clara Frijs) dry matter and soluble solids content with near infrared spectroscopy

    DEFF Research Database (Denmark)

    Travers, Sylvia; Bertelsen, Marianne; Petersen, Karen

    2014-01-01

    Regression models for predicting preharvest dry matter (DM) and soluble solids content (SSC), based on two spectral ranges (680-1000 nm and 1100-2350 nm), were compared. Models based on longer NIR spectra were more successful for both parameters (DM/SSC: R2 = 0.78-0.84; RMECV = 0.78/0.44; LVs = 6....../7). SSC prediction was better than expected considering the presence of starch in fruit. Generally poor SSC prediction in the presence of starch could be related to the inability of models to distinguish between forms of carbohydrate. Variable selection and regression coefficients highlighted...... fruit. Further research is needed to qualify and build on the results presented here....

  2. Reglas claras o presunciones: el derecho de reserva a razón de la franquicia

    OpenAIRE

    Cornejo Sota, Lourdes Pamela

    2015-01-01

    Cuando uno habla de franquicia se viene a la mente negocios con reconocido nombre, ya sea a nivel nacional como internacional, y es así que muchos se sienten atraídos por incursionar en este mundo y obtener un contrato de franquicia que tenga prestigio para poder operarlo de igual manera. Si bien las franquicias han sido utilizadas a nivel internacional desde hace mucho tiempo atrás, las franquicias nacionales datan recién desde el año 1992, las cuales tienden a crecer dados...

  3. Making Health Easier: Tobacco Free Living in Santa Clara, CA PSA (:60)

    Centers for Disease Control (CDC) Podcasts

    2013-05-21

    Instead of walking through clouds of smoke, students in a California community college can now breathe clean air. A college health nurse made it happen with the help of students, faculty, and partners.  Created: 5/21/2013 by National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP).   Date Released: 5/21/2013.

  4. La fundación del monasterio de Santa Clara de Alcocer (1252-1260

    Directory of Open Access Journals (Sweden)

    Martín Prieto, Pablo

    2005-06-01

    Full Text Available This paper deals with the process of foundation of an important monastery of Clarises in Castile, that of Alcocer, about the mid 13th century. It is one of the most prominent examples of the implantation of the mendicant orders in the whole of today's Castilla-La Mancha territory. The foundation was the result of a joint effort on the part of both the Guzman family and the Castillan monarchy, and was established, according to certain information, on the grounds of a preexistent feminine religious life germ.

    En el presente artículo se estudia el proceso de fundación de un importante monasterio de clarisas castellano, el de Alcocer, a mediados del siglo XIII. Se trata de uno de los más relevantes ejemplos de implantación de las órdenes mendicantes en el actual territorio de Castilla-La Mancha. La fundación fue fruto de una iniciativa concertada entre el linaje Guzmán y la corona castellana, y se realizó, según algunos indicios, sobre un germen de vida religiosa femenina preexistente.

  5. South Fork of the Santa Clara River, Santa Clarita Valley, California. Supplement.

    Science.gov (United States)

    1985-01-01

    designed as a broad - crested weir to pass the maximum probable flood (PF) with a peak of 24,500 ofs. The spillway crest length of 100 feet and the...well as from the Miocene Topanga sandstone and the Modelo shale found near the crest of the Santa Susana Mountains in Aliso and Rice Canyons. Fossil...440 1.5 .IN THE AREA. 1I0.050: DRAINAGE AREA IS QUITE RUGGED, WITH SHARP RIDGES 4.4 600 1.3 .050 AND NARROW, STEEP CANYONS THROUGH WHICH WATERCOURSES

  6. DIGITAL FLOOD INSURANCE RATE MAP DATABASE, SANTA CLARA COUNTY, CALIFORNIA, USA

    Data.gov (United States)

    Federal Emergency Management Agency, Department of Homeland Security — The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk...

  7. 78 FR 64233 - Santa Clara Pueblo; Major Disaster and Related Determinations

    Science.gov (United States)

    2013-10-28

    ... authority of the Robert T. Stafford Disaster Relief and Emergency Assistance Act, 42 U.S.C. 5121 et seq.... Stafford Disaster Relief and Emergency Assistance Act, 42 U.S.C. 5121 et seq. (the ``Stafford Act... Management Assistance Grant; 97.048, Disaster Housing Assistance to Individuals and Households In...

  8. 77 FR 53221 - Santa Clara Valley Habitat Conservation Plan/Natural Community Conservation Plan, Environmental...

    Science.gov (United States)

    2012-08-31

    ... review. The EIS was updated to address the comments received on the 2010 Draft EIS. We are considering... burrowing owl (Athene cunicularia hypugaea), tricolored blackbird (Agelaius tricolor), Mount Hamilton... received on the Draft EIR/ EIS and our responses to those comments. Following a 30-day review period, we...

  9. 75 FR 79013 - Santa Clara Valley Habitat Conservation Plan and Natural Community Conservation Plan, CA...

    Science.gov (United States)

    2010-12-17

    ... review and comment. The Service is considering the issuance of a 50-year incidental take permit for 21... as an alternative to the current project-by-project review process. The Draft HCP/NCCP addresses 21... burrowing owl (Athene cunicularia hypugaea), tricolored blackbird (Agelaius tricolor), [[Page 79015...

  10. Crystallization kinetic of clear burning kaolinitic clay; Cinetica de cristalizacao de argila caulinitica de queima clara

    Energy Technology Data Exchange (ETDEWEB)

    Silva, R.A.; Medeiros, J.; Teixeira, S.R. [Universidade Estadual Paulista (DFQB/FCT/UNESP), Presidente Prudente, SP (Brazil). Fac. de Ciencias e Tecnologia. Dept. de Fisica, Quimica e Biologia

    2009-07-01

    It was studied the crystallization kinetics of one caulinitic clay of clear burning, from Teodoro Sampaio (SP) region. Differential thermal analysis (DTA), X-ray diffraction (XRD) and X-ray fluorescence (XRF) had been used in the development of the work. Non-isothermal methods had been used for attainment of the kinetic data and in the determination of the crystallization mechanisms. The exothermic peak associate to the crystallization is located between 900 and 1000 deg C, varying in accordance with the heating rate of the sample. The activation energies were taken using the data of thermal analysis (DTA) and the methods of Kissinger (700 kJ/mol) and Ligero (721 kJ/mol). The Avrami constant n was calculated using Ligero and the m parameter was obtained using Matusita method and the n and E of Ligero. Both values (1.17) are close to 1, indicating growth in two dimensions with morphology of plates and nucleation of surface as dominant mechanism. (author)

  11. 78 FR 67336 - Habitat Conservation Plan for the United Water Conservation District, Santa Clara River Watershed...

    Science.gov (United States)

    2013-11-12

    ... listed fish, by significantly impairing essential behavioral patterns, including breeding, feeding, and... degradation where it actually kills or injures fish or wildlife by significantly impairing essential... biological resources, land use, air quality, water quality, water resources, socio-economics, climate, and...

  12. Making Health Easier: Tobacco Free Living in Santa Clara, CA PSA (:60)

    Centers for Disease Control (CDC) Podcasts

    Instead of walking through clouds of smoke, students in a California community college can now breathe clean air. A college health nurse made it happen with the help of students, faculty, and partners.

  13. International Powered Lift Conference and Exposition, Santa Clara, CA, Dec. 7-10, 1987, Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    1988-01-01

    The present conference on VTOL, STOVL and V/STOL fixed-wing aircraft powered lift discusses hot gas recirculation in V/STOL, flight testing of a single-engine powered lift aircraft, RAF experience with VTOL, near-term improvements of the AV-8B Harrier II, recent advancements in thrust augmentation, lift ejectors for STOVL combat aircraft, the correlation of entrainment and lift enhancement for a two-dimensional propulsive wing, the thrust efficiency of powered lift systems, and flight propulsion control integration for V/STOL aircraft. Also discussed are VSTOL design implications for tactical transports, the numerical investigation of a jet in ground effect with a cross flow, the NASA supersonic STOVL propulsion technology program, the aeroacoustics of advanced STOVL aircraft plumes, powered lift transport aircraft certification criteria status, the application of vectored thrust V/STOL experience in supersonic designs, wave drag and high speed performance of supersonic STOVL fighter configurations, and the impact of bypass ratio on thrust-to-weight for V/STOL.

  14. Santa Clara de Nanay: the MAL-ED cohort in Peru.

    Science.gov (United States)

    Yori, Pablo Peñataro; Lee, Gwenyth; Olórtegui, Maribel Paredes; Chávez, César Banda; Flores, Julian Torres; Vasquez, Angel Orbe; Burga, Rosa; Pinedo, Silvia Rengifo; Asayag, César Ramal; Black, Robert E; Caulfield, Laura E; Kosek, Margaret

    2014-11-01

    The Etiology, Risk Factors and Interactions of Enteric Infections and Malnutrition and the Consequences for Child Health and Development (MAL-ED) cohort study communities in Peru are located in Loreto province, in a rural area 15 km from the city of Iquitos. This riverine population of approximately 5000 individuals is fairly representative of Loreto. The province lags behind the rest of the country in access to water and sanitation, per capita income, and key health indicators including infant mortality (43.0 vs 16.0 per 1000 nationwide) and under-5 mortality (60.6 vs 21.0 per 1000). Total fertility rates are higher than elsewhere in the country (4.3 vs 2.6). Nationwide, the prevalence of human immunodeficiency virus is estimated at 0.45%, the prevalence of tuberculosis is 117 per 100 000, and the incidence of malaria is 258 per 100 000. Stunting in this community is high, whereas acute undernutrition is relatively uncommon. The population suffers from high rates of diarrheal disease. Prevalent enteric pathogens include Ascaris, Giardia, enterotoxigenic Escherichia coli, Shigella, and Campylobacter. © The Author 2014. Published by Oxford University Press on behalf of the Infectious Diseases Society of America. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  15. BRAND - PRODUCT INTERDEPENDENCE

    Directory of Open Access Journals (Sweden)

    Tudor NISTORESCU

    2014-06-01

    Full Text Available In this paper we conceptually discussed the brands’ role in the society, the dimensions of branding and the relationship between the brand and the products. We adhere to the main ideas expressed in the literature, that the brand is more than a product. However the product is needed to render the brand tangible. The product is the magic box that delivers the brand experience. Without the product, the brand meaning would have difficulties in attracting customers. More studies are needed to investigate the brand-product relationship.

  16. Emulsified Water Products

    Directory of Open Access Journals (Sweden)

    Elif Tuğçe AKSUN

    2016-12-01

    Full Text Available Seafood is very important depending on having high protein rate and easily digestibility by human, for supply to an important part of animal protein needed. Determining the quality of emulsion-type products, emulsion stability, viscosity and gel strength properties are very important. In the production of products specified in this property emulsion; the main protein ratio and properties of raw material used while you; emulsion pH, temperature, ionic violence, mixing speed, type of fat and additives that are used as well. Previous studies show that particularly of products resulting from water emulsified chicken and goat meat emulsified product obtained from a high capacity of emulsified and compared to cattle and sheep meat is close to specifications, preparation of emulsified type products may be appropriate for the use of fish meat. Another quality parameter in the emulsified meat products, viscosity depends on the amount of meat used in direct proportion with the texture. Fish meat animals in connective tissue connective tissue in meat other butchers to rate ratio is quite low. In this respect, the fish meat produced using emulsified products viscosity according to products prepared using other meat products is quite low. Fish meat produced using emulsified fish sausage products based on surimi, sausage and fish pate fish varieties classed emulsion type products. In this review the different types of seafood using emulsified meat product.

  17. Micro Products - Product Development and Design

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard

    2003-01-01

    Innovation within the field of micro and nano technology is to a great extent characterized by cross-disciplinary skills. The traditional disciplines like e.g. physics, biology, medicine and engineering are united in a common development process that can only take place in the presence of multi......-disciplinary competences. One example is sensors for chemical analysis of fluids, where chemistry, biology and flow mechanics all influence the design of the product and thereby the industrial fabrication of the product [1]. On the technological side the development has moved very fast, primarily driven by the need...... of the electronics industry to create still smaller chips with still larger capacity. Therefore the manufacturing technologies connected with micro/nano products in silicon are relatively highly developed compared to the technologies used for manufacturing micro products in metals, polymers and ceramics. For all...

  18. Productivity and Competitiveness of Sorghum Production in ...

    African Journals Online (AJOL)

    showed that sorghum production in the study areas yielded profitable returns ... Keywords: Sorghum, Profitability, Competitiveness, Investment Potential, .... Guinness Ghana Brewery Limited to estimate cost and returns at the marketing sector ...

  19. 76 FR 19788 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Telemanagement Forum

    Science.gov (United States)

    2011-04-08

    ... notifications were filed for the purpose of extending the Act's provisions limiting the recovery of antitrust...-LLC, Dubai, UNITED ARAB EMIRATES; Ciminko, Luxembourg, LUXEMBOURG; Cloud Scope Technologies, Inc... computing and networking services, Amsterdam, NETHERLANDS; Savvion, Santa Clara, CA; Site of Knowledge Group...

  20. Product line design

    Czech Academy of Sciences Publication Activity Database

    Anderson, S. P.; Celik, Levent

    2015-01-01

    Roč. 157, May (2015), s. 517-526 ISSN 0022-0531 Institutional support: RVO:67985998 Keywords : product line design * product differentiation * second-degree price discrimination Subject RIV: AH - Economics Impact factor: 1.097, year: 2015

  1. Advances in production technology

    CERN Document Server

    2015-01-01

    This edited volume contains the selected papers presented at the scientific board meeting of the German Cluster of Excellence on “Integrative Production Technology for High-Wage Countries”,  held in November 2014. The topical structure of the book is clustered in six sessions: Integrative Production Technology, Individualised Production, Virtual Production Systems, Integrated Technologies, Self-Optimising Production Systems and Human Factors in Production Technology. The Aachen perspective on a holistic theory of production is complemented by conference papers from external leading researchers in the fields of production, materials science and bordering disciplines. The target audience primarily comprises research experts and practitioners in the field but the book may also be beneficial for graduate students.

  2. Transformer Industry Productivity Slows.

    Science.gov (United States)

    Otto, Phyllis Flohr

    1981-01-01

    Annual productivity increases averaged 2.4 percent during 1963-79, slowing since 1972 to 1.5 percent; computer-assisted design and product standardization aided growth in output per employee-hour. (Author)

  3. Phenomenology of lepton production

    International Nuclear Information System (INIS)

    Renard, F.M.

    1976-06-01

    The problem of lepton production in hadronic collisions is reviewed. The following subjects are developed: the Drell-Yan model for continuous l + l - production, vector mesons and clusters, and other sources of direct leptons [fr

  4. Pesticide Product Label System

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Pesticide Product Label System (PPLS) provides a collection of pesticide product labels (Adobe PDF format) that have been approved by EPA under Section 3 of the...

  5. Dictionaries for text production

    DEFF Research Database (Denmark)

    Fuertes-Olivera, Pedro; Bergenholtz, Henning

    2018-01-01

    Dictionaries for Text Production are information tools that are designed and constructed for helping users to produce (i.e. encode) texts, both oral and written texts. These can be broadly divided into two groups: (a) specialized text production dictionaries, i.e., dictionaries that only offer...... a small amount of lexicographic data, most or all of which are typically used in a production situation, e.g. synonym dictionaries, grammar and spelling dictionaries, collocation dictionaries, concept dictionaries such as the Longman Language Activator, which is advertised as the World’s First Production...... Dictionary; (b) general text production dictionaries, i.e., dictionaries that offer all or most of the lexicographic data that are typically used in a production situation. A review of existing production dictionaries reveals that there are many specialized text production dictionaries but only a few general...

  6. Household Products Database: Pesticides

    Science.gov (United States)

    ... of Products Manufacturers Ingredients About the Database FAQ Product ... control bulbs carpenter ants caterpillars crabgrass control deer dogs dogs/cats fertilizer w/insecticide fertilizer w/weed ...

  7. Consumer Product Category Database

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Chemical and Product Categories database (CPCat) catalogs the use of over 40,000 chemicals and their presence in different consumer products. The chemical use...

  8. Globalization and Productivity

    DEFF Research Database (Denmark)

    Hayakawa, Kazunobu; Machikita, Tomohiro

    2012-01-01

    Recent empirical studies which utilize plant- or establishment-level data to examine globalization's impact on productivity have discovered many causal mechanisms involved in globalization's impact on firms’ productivity. Because these pathways have been broad, there have been few attempts...

  9. Production sharing agreements

    International Nuclear Information System (INIS)

    1994-01-01

    This paper, which was presented at the Production Sharing Agreement seminar, discusses economic rent, negotiations, trends in fiscal system development, and concessionary systems. Production sharing contracts, risk service contracts, joint ventures and the global market are examined. (UK)

  10. Alcohol production from whey

    Energy Technology Data Exchange (ETDEWEB)

    Reesen, L

    1978-01-01

    The continuous production of ethanol from whey permeate, by fermentation of its lactose with Kluyveromyces fragilis, is described. From whey containing 4.4% lactose, production costs were very competitive with those for alcohol from molasses.

  11. National pulpwood production, 2010

    Science.gov (United States)

    Ronald J. Piva; James W. Bentley; Steven W. Hayes

    2014-01-01

    U.S. pulpwood production amounted to 86.5 million cords in 2010, a decrease of 4 percent from 2008. Roundwood production totaled 65.7 million cords and accounted for 76 percent of the Nation's total pulpwood production. The Southern Region led the Nation in total production with 65.5 million cords, followed by the Northern Region with 12.8 million cords, and the...

  12. National pulpwood production, 2008

    Science.gov (United States)

    Tony G. Johnson; Ronald J. Piva; Brian F. Walters; al. et.

    2011-01-01

    United States’ pulpwood production amounted to 89.2 million cords in 2008. Roundwood production totaled 63.0 million cords and accounted for 71 percent of the Nation’s total pulpwood production. The use of wood residue totaled 26.2 million cords. Georgia led the Nation in total production, with 11.6 million cords. In 2008, 146 mills were operating and drawing wood from...

  13. Southern pulpwood production, 2007

    Science.gov (United States)

    Tony G. Johnson; Carolyn D. Steppleton; James w. Bentley

    2009-01-01

    The South’s production of pulpwood increased from 64.7 million cords in 2006 to 65.7 million cords in 2007. Roundwood production increased 1.2 million cords to 47.6 million cords and accounted for 72 percent of the total pulpwood production. The use of wood residue declined 1 percent to 18.2 million cords. Alabama led the South in total production at 10.6 million cords...

  14. Nordic Noir Production Values

    DEFF Research Database (Denmark)

    Waade, Anne Marit; Jensen, Pia Majbritt

    2013-01-01

    In this article the authors argue that Nordic noir constitutes a set of production values utilised and conceptualised to make Danish television series attractive in the international market. The idea of production values is embedded into a media industrial context where market principles of target...... by relating the specific Nordic noir production values present in the two series to changing conditions in Danish television drama production, in particular the internationalisation of DR’s Drama Division....

  15. Pomegranate production and marketing

    Science.gov (United States)

    This book is relatively short, with 134 pages, 15 chapters, 52 figures, and 20 tables. It ranges from cultivar descriptions, production, biotic and abiotic challenges to production, to postharvest, aril and juice production, health benefits, and international trade. It contains great information and...

  16. Reconstituted products from oak

    Science.gov (United States)

    W. C. Lewis; B. G. Heebink

    1971-01-01

    "Reconstituted" describes a family of panel products made from fractionated oak, bonded with either a synthetic resin or a natural lignin bond. Several current commercial fiber panel products from oak are described, and the status of research on experimental products and processes is presented. Recent technological developments are removing the stigma...

  17. Scenario based product design

    NARCIS (Netherlands)

    Tideman, M.

    2008-01-01

    Creating good products is not an easy thing to do. There are usually many different people who have an interest in the product. People such as the user, of course, but also marketing managers, production engineers, maintenance workers, recycling specialists, and government representatives, just to

  18. Age, Wage and Productivity

    NARCIS (Netherlands)

    van Ours, J.C.; Stoeldraijer, L.

    2010-01-01

    Previous empirical studies on the effect of age on productivity and wages find contradicting results. Some studies find that if workers grow older there is an increasing gap between productivity and wages, i.e. wages increase with age while productivity does not or does not increase at the same

  19. Polling, production & priorities

    NARCIS (Netherlands)

    Winands, E.M.M.

    2007-01-01

    Polling, Production & Priorities The present monograph focuses on the so-called stochastic economic lot scheduling problem (SELSP), which deals with the make-to-stock production of multiple standardized products on a single machine with limited capacity under random demands, possibly random setup

  20. Star Products and Applications

    OpenAIRE

    Iida, Mari; Yoshioka, Akira

    2010-01-01

    Star products parametrized by complex matrices are defined. Especially commutative associative star products are treated, and star exponentials with respect to these star products are considered. Jacobi's theta functions are given as infinite sums of star exponentials. As application, several concrete identities are obtained by properties of the star exponentials.

  1. Framework of product experience

    NARCIS (Netherlands)

    Desmet, P.; Hekkert, P.

    2007-01-01

    In this paper, we introduce a general framework for product experience that applies to all affective responses that can be experienced in human-product interaction. Three distinct components or levels of product experiences are discussed: aesthetic experience, experience of meaning, and emotional

  2. Production and quality of tomato fruits under organic management Produção e qualidade dos frutos de cultivares de tomateiro, sob manejo orgânico

    Directory of Open Access Journals (Sweden)

    Débora S Toledo

    2011-06-01

    Full Text Available Information about the production and quality of tomato cultivars under organic management and the conditions of climate and soil from the north region of Minas Gerais State, Brasil, are scarce. Thus, this research was carried out to evaluate the production and quality of tomato cultivars under organic management, in this region. The treatments consisted of four open pollination tomato cultivars (Chadwick Cherry, Pitanga vermelha, Santa Clara and Santa Cruz Kada and five hybrid cultivars (Marguerita, Nicolas, Ellen, Magestade and Dominador. The experimental design was of randomized blocks with three replications. The experiment was carried out using organic fertilization in the initial preparation of the area, compost and rock phosphate and sprays with Bordeaux mixture, neem oil and fertilizer. The marketable yield varied from 12.3 t ha-1 to 23.9 t ha-1. The hybrid Marguerita presented higher marketable production (23.9 t ha-1. The cultivars Chadwick Cherry and Pitanga Vermelha reached similar production as most cultivars and larger proportions of marketable and giant fruits, and therefore, better market quality. All the cultivars presented low potassium and manganese levels in foliar tissue suggesting an evaluation after various organic manuring cycles and better nutrition conditions are necessary to permit the comparison of the performance of cultivars in this system.Informações sobre a produção e qualidade de frutos de cultivares de tomateiro, sob manejo orgânico, nas condições de clima e solo do Norte de Minas Gerais, Brasil, são escassas. Por isso, o objetivo deste trabalho foi avaliar a produção e qualidade de frutos de cultivares de tomateiro, sob manejo orgânico, em Montes Claros-MG. Os tratamentos consistiram de quatro cultivares de tomate de polinização livre (Chadwick Cherry, Pitanga Vermelha, Santa Clara e Santa Cruz Kada e cinco cultivares híbridos (Marguerita, Nícolas, Ellen, Majestade e Dominador. Foi utilizado o

  3. Evolving production network structures

    DEFF Research Database (Denmark)

    Grunow, Martin; Gunther, H.O.; Burdenik, H.

    2007-01-01

    When deciding about future production network configurations, the current structures have to be taken into account. Further, core issues such as the maturity of the products and the capacity requirements for test runs and ramp-ups must be incorporated. Our approach is based on optimization...... modelling and assigns products and capacity expansions to production sites under the above constraints. It also considers the production complexity at the individual sites and the flexibility of the network. Our implementation results for a large manufacturing network reveal substantial possible cost...

  4. Product Structuring, an overview

    DEFF Research Database (Denmark)

    Tichem, Marcel; Storm, Ton; Andreasen, Mogens Myrup

    1997-01-01

    .In the paper, the field of product structuring is defined and broken down into topics. For each of the topics, results of research are presented. Issues for further research are identified. The references in the paper refer to papers in the proceedings of the workshops.......This paper presents the highlights of two WDK Workshops on Product Structuring. Product structuring plays an important role in creating products which have good functional and life-cycle related properties, in design process management, and in several other company functions like production control...

  5. Productivity analysis of sunflower production in Turkey

    International Nuclear Information System (INIS)

    Semerci, A.

    2012-01-01

    In Turkey, which ranks the tenth country worldwide in the sunflower (Helianthus annuus L.) production, 55% of the production is carried out in Thrace Region. Therefore, agricultural enterprises in Thrace Region, situated in the European part of Turkey have specialized in producing sunflower, and have become the centre of vegetable oil industry in the region in terms of produced raw material. This research was conducted in 182 agricultural enterprises in 3 provinces of Thrace Region in Turkey and its objective was to determine input/output relations in sunflower production. The study indicates that the determination coefficient (r/sup 2/) derived from Cobb-Douglas production function was significant at 0.01 level and the elasticity coefficients of the variables (except chemical fertilizer) were found beta i positive in derived equation. It was determined that the variable of herbicide cost had the highest value of the marginal effectiveness coefficients and none of the variables was used at economically optimal level in the study area. When the Marginal Technical Substitution and the Price Rates were taken into consideration, it was noted that only the seed cost/hoeing cost was closest to economically optimum level (1.10). According to stepwise analysis the Land Renting Value was determined as the most important variable in sunflower production. (author)

  6. Product Platform Modeling

    DEFF Research Database (Denmark)

    Pedersen, Rasmus

    for customisation of products. In many companies these changes in the business environment have created a controversy between the need for a wide variety of products offered to the marketplace and a desire to reduce variation within the company in order to increase efficiency. Many companies use the concept...... other. These groups can be varied and combined to form different product variants without increasing the internal variety in the company. Based on the Theory of Domains, the concept of encapsulation in the organ domain is introduced, and organs are formulated as platform elements. Included......This PhD thesis has the title Product Platform Modelling. The thesis is about product platforms and visual product platform modelling. Product platforms have gained an increasing attention in industry and academia in the past decade. The reasons are many, yet the increasing globalisation...

  7. Low income product innovation

    Directory of Open Access Journals (Sweden)

    Maria Cecília Sobral

    2008-10-01

    Full Text Available At affluent markets, the literature on product development management tells us to aggregate value and technology, to differentiate products and to launch fast. And at the low-income markets? This exploratory research defines a popular product, characterizes and measures their markets in Brazil, and identifies innovation strategies for them. The results suggest that the effective strategic orientation differs from affluent markets. It includes: to enhance the auto service component; to identify and service the key functionalities to the targeted public; to standardize products and increase the production scale; to extend the product life cycle; to use convenient distribution and marketing channels; to build product images that have appeal in the popular market; to offer longer financing horizons with befittingly lower installments. Data came from market researches and general demographic census. General media published stories were used to identify companies and their strategies. And a few case studies allowed the authors a deeper exploration of the relevant themes.

  8. Chlorhexidine in cosmetic products

    DEFF Research Database (Denmark)

    Opstrup, Morten Schjørring; Johansen, Jeanne Duus; Bossi, Rossana

    2015-01-01

    or an antimicrobial agent in cosmetic products at a concentration up to 0.3%, as set by the European Cosmetics Directive (now Regulations). OBJECTIVES: To identify cosmetic product types containing chlorhexidine, and to measure the concentration of chlorhexidine in selected products. METHODS: Between February 2013...... and April 2013, we checked for chlorhexidine in cosmetic products in 14 supermarkets, one hairdressing salon and one beauty and retail store in Copenhagen, Denmark by reading the ingredient labels. The chlorhexidine concentration was measured in 10 selected products by high-performance liquid chromatography...... concentrations were 0.01-0.15%. CONCLUSIONS: We found chlorhexidine in various cosmetic product types, predominantly aimed at females, and in hair products. The measured chlorhexidine concentrations were all within the permitted limit. The relevance for allergic sensitization should be further explored....

  9. Play as productionproduction as game?

    DEFF Research Database (Denmark)

    Eichberg, Henning

    2015-01-01

    Play-related products and their export have through recent decades contributed to a certain Danish image on the world level – with Lego bricks at the commercial end and adventure playgrounds at the pedagogical end. The phenomena of toy production and play exports challenge our understanding of what...... “play” and “game” are, and of their social as well as political significance. At the municipal level, the city of Odense – “city of Hans Christian Andersen” – is branding itself as “city of play”. On the international level, Danish play-related products have expanded on the world market. In the field...... of sport, Danish sport is not just elite sport, but also organized in local associations. People meet in mass summer festivals of popular sport. Folk Academies develop sport as personal development, often in an experimental way. Street sports, parkour, play and games are promoted. Civil society is a basis...

  10. 17 CFR 229.1204 - (Item 1204) Oil and gas production, production prices and production costs.

    Science.gov (United States)

    2010-04-01

    ... production, production prices and production costs. 229.1204 Section 229.1204 Commodity and Securities... production, production prices and production costs. (a) For each of the last three fiscal years disclose... production cost, not including ad valorem and severance taxes, per unit of production. Instruction 1 to Item...

  11. Nephrotoxicity of Natural Products.

    Science.gov (United States)

    Nauffal, Mary; Gabardi, Steven

    2016-01-01

    The manufacture and sale of natural products constitute a multi-billion dollar industry. Nearly a third of the American population admit to using some form of complementary or alternative medicine, with many using them in addition to prescription medications. Most patients fail to inform their healthcare providers of their natural product use and physicians rarely inquire. Annually, thousands of natural product-induced adverse events are reported to Poison Control Centers nationwide. Natural product manufacturers are not responsible for proving safety and efficacy, as the FDA does not regulate them. However, concerns exist surrounding the safety of natural products. This review provides details on natural products that have been associated with renal dysfunction. We have focused on products that have been associated with direct renal injury, immune-mediated nephrotoxicity, nephrolithiasis, rhabdomyolysis with acute renal injury, hepatorenal syndrome, and common adulterants or contaminants that are associated with renal dysfunction. The potential for natural products to cause renal dysfunction is justifiable. It is imperative that natural product use be monitored closely in all patients. Healthcare practitioners must play an active role in identifying patients using natural products and provide appropriate patient education. © 2016 S. Karger AG, Basel.

  12. Fermentative production of isobutene.

    Science.gov (United States)

    van Leeuwen, Bianca N M; van der Wulp, Albertus M; Duijnstee, Isabelle; van Maris, Antonius J A; Straathof, Adrie J J

    2012-02-01

    Isobutene (2-methylpropene) is one of those chemicals for which bio-based production might replace the petrochemical production in the future. Currently, more than 10 million metric tons of isobutene are produced on a yearly basis. Even though bio-based production might also be achieved through chemocatalytic or thermochemical methods, this review focuses on fermentative routes from sugars. Although biological isobutene formation is known since the 1970s, extensive metabolic engineering is required to achieve economically viable yields and productivities. Two recent metabolic engineering developments may enable anaerobic production close to the theoretical stoichiometry of 1isobutene + 2CO(2) + 2H(2)O per mol of glucose. One relies on the conversion of 3-hydroxyisovalerate to isobutene as a side activity of mevalonate diphosphate decarboxylase and the other on isobutanol dehydration as a side activity of engineered oleate hydratase. The latter resembles the fermentative production of isobutanol followed by isobutanol recovery and chemocatalytic dehydration. The advantage of a completely biological route is that not isobutanol, but instead gaseous isobutene is recovered from the fermenter together with CO(2). The low aqueous solubility of isobutene might also minimize product toxicity to the microorganisms. Although developments are at their infancy, the potential of a large scale fermentative isobutene production process is assessed. The production costs estimate is 0.9 Euro kg(-1), which is reasonably competitive. About 70% of the production costs will be due to the costs of lignocellulose hydrolysate, which seems to be a preferred feedstock.

  13. Recombinant organisms for production of industrial products

    OpenAIRE

    Adrio, Jose-Luis; Demain, Arnold L

    2009-01-01

    A revolution in industrial microbiology was sparked by the discoveries of ther double-stranded structure of DNA and the development of recombinant DNA technology. Traditional industrial microbiology was merged with molecular biology to yield improved recombinant processes for the industrial production of primary and secondary metabolites, protein biopharmaceuticals and industrial enzymes. Novel genetic techniques such as metabolic engineering, combinatorial biosynthesis and molecular breeding...

  14. Leading co-production

    DEFF Research Database (Denmark)

    Tortzen, Anne

    leadership styles executed by public managers affect the quality and public value of co-production processes? The paper argues that publicly initiated co-production initiatives are influenced by conflicting governance logics placing public managers in an institutional cross pressure (Lowndes & Roberts, 2013...... of building networks and relations, developing trust and focusing on empowerment and on the participants' resources to develop innovative solutions Drawing on three qualitative case studies of ‘most likely' co-production cases in Danish municipalities, the study identifies three different leadership styles...... and increase public value (Bovaird & Löffler, 2012; Osborne, 2010). The paper argues that a deeper understanding of the dynamics of co-production can be gained from analyzing the leadership dimension of co-production processes, which has hitherto not been given much attention by co-production researchers...

  15. Product Platform Performance

    DEFF Research Database (Denmark)

    Munk, Lone

    The aim of this research is to improve understanding of platform-based product development by studying platform performance in relation to internal effects in companies. Platform-based product development makes it possible to deliver product variety and at the same time reduce the needed resources...... engaging in platform-based product development. Similarly platform assessment criteria lack empirical verification regarding relevance and sufficiency. The thesis focuses on • the process of identifying and estimating internal effects, • verification of performance of product platforms, (i...... experienced representatives from the different life systems phase systems of the platform products. The effects are estimated and modeled within different scenarios, taking into account financial and real option aspects. The model illustrates and supports estimation and quantification of internal platform...

  16. Global product development

    DEFF Research Database (Denmark)

    Hansen, Zaza Nadja Lee; Ahmed-Kristensen, Saeema

    2011-01-01

    Globalisation has enabled companies to globalise their product development process. Today, everything from manufacturing to R&D can be globally distributed. This has led to a more complex and disintegrated product development process. This paper investigates the impacts companies have experienced...... operational solutions to counteract the negative impacts with varying degrees of success. This paper presents a unique look into global product development through an investigation of its impact on the organisation, the product development process, and the product. Furthermore, it shows the solutions...... as a result of this, and how they have been addressed. Data was collected through case studies of five Danish multinational corporations. The findings showed that the companies experienced several challenges when they globalised their product development process. They consequently implemented various...

  17. MICROORGANISMS IN CONFECTIONERY PRODUCTS

    OpenAIRE

    Ľubomíra Juhaniaková; Miroslava Kačániová

    2011-01-01

    The aim of this work was to determine microbiological quality of confectionery products. In confectionery products microbiological parameters: coliforms bacteria, microscopic filamentous fungi and yeasts, Salmonella sp. and staphylococci were observed. The confectionery products were evaluated: Kremes - honey cube, roll Arabica, roll Rona, roll stuffed with apricot cream, honey cube, pinwheel caramel, Sachovnica cut, Zora cut and curd cake. For microbiological tests 18 samples of confectioner...

  18. Southern pulpwood production, 2008

    Science.gov (United States)

    Tony G. Johnson; Carolyn D. Steppleton; James W. Bentley

    2010-01-01

    The South’s production of pulpwood increased from 65.7 million cords in 2007 to 67.0 million cords in 2008. Roundwood production increased by 1.2 million cords to 48.8 million cords and accounted for 73 percent of the South’s total pulpwood production. The use of wood residue remained stable at 18.2 million cords. Georgia led the South...

  19. Southern pulpwood production, 2012

    Science.gov (United States)

    James W. Bentley; Jason A. Cooper

    2015-01-01

    The South’s production of pulpwood increased from 62.7 million cords in 2011 to 63.7 million cords in 2012. Roundwood production decreased by 770,000 cords to 49.3 million cords and accounted for 78 percent of the South’s total pulpwood production. The use of wood residue dropped 15 percent to 14.4 million cords in 2012. Georgia and Alabama led the South in total...

  20. Southern pulpwood production, 2011

    Science.gov (United States)

    James W. Bentley; Carolyn D. Steppleton

    2013-01-01

    The South’s production of pulpwood declined from 65.5 million cords in 2010 to 62.7 million cords in 2011. Roundwood production decreased by 878,000 cords to 50.1 million cords and accounted for 80 percent of the South’s total pulpwood production. The use of wood residue dropped 14 percent to 12.6 million cords in 2011. Georgia and Alabama led the South in total...

  1. Electricity production of Slovakia

    International Nuclear Information System (INIS)

    Czodor, T.

    2003-01-01

    Here is examined the spatial structure of electric energy production divided in hydropower plants (through-flow and re-pumping), thermal power plants as the most expensive way of electric energy production and nuclear power plants where high difficulty and long-term realisation of construction projects and spent financial resources are pointed out. Work describes present structure of electric energy production and consumption and refers to alternative electric energy sources

  2. Working Hours and Productivity

    OpenAIRE

    Collewet, Marion; Sauermann, Jan

    2017-01-01

    This paper studies the link between working hours and productivity using daily information on working hours and performance of a sample of call centre agents. We exploit variation in the number of hours worked by the same employee across days and weeks due to central scheduling, enabling us to estimate the effect of working hours on productivity. We find that as the number of hours worked increases, the average handling time for a call increases, meaning that agents become less productive. Th...

  3. Productivity in Public Services

    OpenAIRE

    Helen Simpson

    2007-01-01

    This paper discusses issues arising in the measurement of productivity in public services. Compared to measuring productivity in the private sector difficulties arise because the output of public services is often un-priced and because some public services are consumed collectively. A key problem is measuring the full range of outputs and quality improvements delivered by public sector organisations that are valued by society. Without comprehensive measures of output productivity statistics m...

  4. Ionization of food products

    International Nuclear Information System (INIS)

    Vasseur, J.P.

    1991-01-01

    After general remarks on foods preservation, on international works and on ionization future prospects, main irradiation sources are described. Recalls on radioactivity, on radiation-matter interaction, on toxicology of ionized foods and on ionized foods detection are given. Ionization applications to various products are reviewed, especially in: - Poultry meat - Fishing products - Fresh fruits and vegetables - Dry fruits and vegetables - spices, tea, infusion - prepacked products... An evaluation of economics and sociocultural impacts is presented in connection with recent experiments [fr

  5. Accounting for productivity

    DEFF Research Database (Denmark)

    Aiyar, Shekhar; Dalgaard, Carl-Johan Lars

    2009-01-01

    The development accounting literature almost always assumes a Cobb-Douglas (CD) production function. However, if in reality the elasticity of substitution between capital and labor deviates substantially from 1, the assumption is invalid, potentially casting doubt on the commonly held view...... that factors of production are relatively unimportant in accounting for differences in labor productivity. We use international data on relative factor shares and capital-output ratios to formulate a number of tests for the validity of the CD assumption. We find that the CD specification performs reasonably...... well for the purposes of cross-country productivity accounting....

  6. Measuring Clinical Productivity.

    Science.gov (United States)

    Hudson, Mark E; Lebovitz, Evan E

    2018-06-01

    Productivity measurements have been used to evaluate and compare physicians and physician practices. Anesthesiology is unique in that factors outside anesthesiologist control impact opportunity for revenue generation and make comparisons between providers and facilities challenging. This article uses data from the multicenter University of Pittsburgh Physicians Department of Anesthesiology to demonstrate factors influencing productivity opportunity by surgical facility, between department divisions and subspecialties within multispecialty divisions, and by individuals within divisions. The complexities of benchmarking anesthesiology productivity are demonstrated, and the potential value of creating a productivity profile for facilities and groups is illustrated. Copyright © 2018 Elsevier Inc. All rights reserved.

  7. Sustainable hydrogen production

    Energy Technology Data Exchange (ETDEWEB)

    Block, D.L.; Linkous, C.; Muradov, N.

    1996-01-01

    This report describes the Sustainable Hydrogen Production research conducted at the Florida Solar Energy Center (FSEC) for the past year. The report presents the work done on the following four tasks: Task 1--production of hydrogen by photovoltaic-powered electrolysis; Task 2--solar photocatalytic hydrogen production from water using a dual-bed photosystem; Task 3--development of solid electrolytes for water electrolysis at intermediate temperatures; and Task 4--production of hydrogen by thermocatalytic cracking of natural gas. For each task, this report presents a summary, introduction/description of project, and results.

  8. DESIGN VERSUS PRODUCT DEVELOPMENT?

    Directory of Open Access Journals (Sweden)

    Edu Grieco Mazzini Junior

    2015-03-01

    Full Text Available Design or product development? The questioning in relation to the employment of such terminology dates back to possible misconceptions regarding interpretation and approach them. Therefore, it can be stated that there are differences between these two terms? In this context, we highlight two views concerning the origin of the design. The first character creative and based on pre-industrial revolution, based on projective and methodologies directed towards the practice of designing products. And second, where design is understood as an industrial process: the development of new products includes, besides a creative procedure are developed, and symbolic formal solutions for products, but also a technical procedure based on the definition of the requirements concerning the product engineering. Is this the most widely accepted interpretation? theoretical studies were conducted from interpretations of the concept of the design proposed by the International Council of Societies of Industrial Design – ICSDI (2012, and for the characterization of the process of product development, we sought to develop an analogy between these two terminologies and can be proved that the use of one of terminology will not cause deviations of interpretation, since both deal with the life cycle of the product. The main results obtained until now the definition of design proposed by the ICSID where it is characterized as a creative activity focused on the complete life cycle of products is the more approaches of the concept of product development.

  9. The Internationalisation of Production

    DEFF Research Database (Denmark)

    Yang, Cheng; Madsen, Erik Skov

    2013-01-01

    practice is further analysed in terms of (1) general information of each case company; (2) motivation of production internationalisation of each case company; (3) limitations as SMEs to internationalise production; (4) operational activities during the internationalization; (5) benefits of joint effort......This paper mainly aims to explore how SMEs internationalise their production. Directed by this objective, a new practice adopted by five Danish SMEs to internationalise their production to China is identified, which to our knowledge has never been reported by any of the existing literature. The new...

  10. Optimizing production under uncertainty

    DEFF Research Database (Denmark)

    Rasmussen, Svend

    This Working Paper derives criteria for optimal production under uncertainty based on the state-contingent approach (Chambers and Quiggin, 2000), and discusses po-tential problems involved in applying the state-contingent approach in a normative context. The analytical approach uses the concept...... of state-contingent production functions and a definition of inputs including both sort of input, activity and alloca-tion technology. It also analyses production decisions where production is combined with trading in state-contingent claims such as insurance contracts. The final part discusses...

  11. SMART Product Innovation

    DEFF Research Database (Denmark)

    Cramer-Petersen, Claus L.; Ahmed-Kristensen, Saeema; Li, Xuemeng

    2016-01-01

    . The ambition of The Danish Industry Foundation and The Kata Foundation was to develop a method; a robust and specific approach to ensure that product innovation in Danish enterprises in practice would result in products of the highest quality, producible at lower costs and profitable at competitive prices...... products to our neighboring countries continues to suffer. The customers’ financial capacity has been reduced and cheaper products from Asia and other regions have found their way into our local markets. Competition is fierce – especially pricewise. This was the starting point for the SMART project...

  12. PRODUCT STRUCTURE DIGITAL MODEL

    Directory of Open Access Journals (Sweden)

    V.M. Sineglazov

    2005-02-01

    Full Text Available  Research results of representation of product structure made by means of CADDS5 computer-aided design (CAD system, Product Data Management Optegra (PDM system and Product Life Cycle Management Wind-chill system (PLM, are examined in this work. Analysis of structure component development and its storage in various systems is carried out. Algorithms of structure transformation required for correct representation of the structure are considered. Management analysis of electronic mockup presentation of the product structure is carried out for Windchill system.

  13. Production control system specified quality sausage products

    Directory of Open Access Journals (Sweden)

    A. V. Tokarev

    2016-01-01

    Full Text Available The problem of management of production target in technological system of production of sausages of the set quality is considered in article. Decomposition of technological system is considered. Functions of management are allocated: formation of an optimum compounding of forcemeat, expert analysis of a compounding, laboratory analysis of a compounding and its statement. Information technology of interaction of these functions is offered. The mathematical problem definition of finding of an optimum compounding meat product with use of possible substitutes of ingredients is presented. This mathematical problem is a classical linear programming problem whose solution has the standard program. Since the manufacture of the finished product are various nonlinear effects are taken into account at the present time it is practically impossible, the methodology provided in this operation "Expert analysis of the formulation" and "Laboratory analysis of the finished product." An example of calculating the optimum alternative base recipe "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002. For an alternative formulation demands were made at a cost of meat, the ingredient composition, as well as the final product organoleptic and physic-chemical indicators should comply with regulatory requirements "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002. Indicator acid activity (pH calculated stuffing formulation should be in the range 6.0-6.3. As a partial replacement for the main raw material have been proposed acceptable substitutes. It was necessary to calculate on the basis of the formulation "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002 optimal price and quality alternative formulation. As a result of depreciation of the value of alternative stuffing recipe was 14,5 % when all of the restrictions on the consumer properties. The proposed information technology implemented in the software package "Multi

  14. Industrial production of products like petroleum

    Energy Technology Data Exchange (ETDEWEB)

    Baurier, P J.H.

    1925-02-25

    This invention has as its object a process for separating tars, oils, or gases coming from the distillation of carbonaceous materials, such as lignities or shales, to separate all other substances of the same kind and to prepare products like petroleum. The process for present consideration consists essentially in achieving simultaneously hydrogenation of the material (treated for conversion to stable products) and desulfurization of the materials showing the following characteristics: The substances to be treated are fed in the gaseous state, as vapors or pulverized and made to react at a temperature of 300 to 450/sup 0/C in the presence of excess water vapor, on divided metals capable of decomposing the water with release of hydrogen, at a temperature below 450/sup 0/C.

  15. Recombinant organisms for production of industrial products

    Science.gov (United States)

    Adrio, Jose-Luis

    2010-01-01

    A revolution in industrial microbiology was sparked by the discoveries of ther double-stranded structure of DNA and the development of recombinant DNA technology. Traditional industrial microbiology was merged with molecular biology to yield improved recombinant processes for the industrial production of primary and secondary metabolites, protein biopharmaceuticals and industrial enzymes. Novel genetic techniques such as metabolic engineering, combinatorial biosynthesis and molecular breeding techniques and their modifications are contributing greatly to the development of improved industrial processes. In addition, functional genomics, proteomics and metabolomics are being exploited for the discovery of novel valuable small molecules for medicine as well as enzymes for catalysis. The sequencing of industrial microbal genomes is being carried out which bodes well for future process improvement and discovery of new industrial products. PMID:21326937

  16. Recombinant organisms for production of industrial products.

    Science.gov (United States)

    Adrio, Jose-Luis; Demain, Arnold L

    2010-01-01

    A revolution in industrial microbiology was sparked by the discoveries of ther double-stranded structure of DNA and the development of recombinant DNA technology. Traditional industrial microbiology was merged with molecular biology to yield improved recombinant processes for the industrial production of primary and secondary metabolites, protein biopharmaceuticals and industrial enzymes. Novel genetic techniques such as metabolic engineering, combinatorial biosynthesis and molecular breeding techniques and their modifications are contributing greatly to the development of improved industrial processes. In addition, functional genomics, proteomics and metabolomics are being exploited for the discovery of novel valuable small molecules for medicine as well as enzymes for catalysis. The sequencing of industrial microbal genomes is being carried out which bodes well for future process improvement and discovery of new industrial products. © 2010 Landes Bioscience

  17. Volatile products controlling Titan's tholins production

    KAUST Repository

    Carrasco, Nathalie

    2012-05-01

    A quantitative agreement between nitrile relative abundances and Titan\\'s atmospheric composition was recently shown with a reactor simulating the global chemistry occurring in Titan\\'s atmosphere (Gautier et al. [2011]. Icarus, 213, 625-635). Here we present a complementary study on the same reactor using an in situ diagnostic of the gas phase composition. Various initial N 2/CH 4 gas mixtures (methane varying from 1% to 10%) are studied, with a monitoring of the methane consumption and of the stable gas neutrals by in situ mass spectrometry. Atomic hydrogen is also measured by optical emission spectroscopy. A positive correlation is found between atomic hydrogen abundance and the inhibition function for aerosol production. This confirms the suspected role of hydrogen as an inhibitor of heterogeneous organic growth processes, as found in Sciamma-O\\'Brien et al. (Sciamma-O\\'Brien et al. [2010]. Icarus, 209, 704-714). The study of the gas phase organic products is focussed on its evolution with the initial methane amount [CH 4] 0 and its comparison with the aerosol production efficiency. We identify a change in the stationary gas phase composition for intermediate methane amounts: below [CH 4] 0=5%, the gas phase composition is mainly dominated by nitrogen-containing species, whereas hydrocarbons are massively produced for [CH 4] 0>5%. This predominance of N-containing species at lower initial methane amount, compared with the maximum gas-to solid conversion observed in Sciamma-O\\'Brien et al. (2010) for identical methane amounts confirms the central role played by N-containing gas-phase compounds to produce tholins. Moreover, two protonated imines (methanimine CH 2NH and ethanamine CH 3CHNH) are detected in the ion composition in agreement with Titan\\'s INMS measurements, and reinforcing the suspected role of these chemical species on aerosol production. © 2012 Elsevier Inc.

  18. Questionnaire typography and production.

    Science.gov (United States)

    Gray, M

    1975-06-01

    This article describes the typographic principles and practice which provide the basis of good design and print, the relevant printing processes which can be used, and the graphic designer's function in questionnaire production. As they impose constraints on design decisions to be discussed later in the text, the various methods of printing and production are discussed first.

  19. Product line design

    Czech Academy of Sciences Publication Activity Database

    Anderson, S. P.; Celik, Levent

    2015-01-01

    Roč. 157, May (2015), s. 517-526 ISSN 0022-0531 R&D Projects: GA ČR(CZ) GA15-22540S Institutional support: PRVOUK-P23 Keywords : product line design * product differentiation * second-degree price discrimination Subject RIV: AH - Economics Impact factor: 1.097, year: 2015

  20. Training for Productivity.

    Science.gov (United States)

    Maglen, Leo; Hopkins, Sonnie; Burke, Gerald

    An exploratory study was conducted to evaluate the utility of a method to demonstrate that Australian enterprises that invest in the training of their employees gain a return from that investment through an increase in employee productivity. The method, which compares enterprise expenditure on training of personnel with labor productivity across a…

  1. Marketing Novel Fruit Products

    NARCIS (Netherlands)

    ’T Riet, Van Jonathan; Onwezen, M.C.; Bartels, Jos; Lans, Van Der I.A.; Kraszewska, Magdalena

    2016-01-01

    The purpose of this study was to compare the influence of four different marketing claims and price information on consumers’ product choices for novel fruits and novel fruit products, using a choice experiment. In total, 1,652 people in Greece (n = 400), the Netherlands (n = 419), Poland (n =

  2. Heavy-Quark Production

    CERN Document Server

    Frixione, Stefano; Nason, Paolo; Ridolfi, Giovanni

    1997-01-01

    We review the present theoretical and experimental status of heavy quark production in high-energy collisions. In particular, we cover hadro- and photoproduction at fixed target experiments, at HERA and at the hadron colliders, as well as aspects of heavy quark production in e+e- collisions at the Z0 peak.

  3. Products from cottonseed

    Energy Technology Data Exchange (ETDEWEB)

    Glushenkova,

    1977-01-01

    A review with 41 references is made on the manufacture of oil, protein, and other products from cottonseed, the effects of gossypol on protein yield and quality and technology of gossypol removal. A process eliminating thermal treatment of the kernels and permitting the production of oil, proteins, phytin, gossypol, sugar, sterols, phosphatides, tocopherols, and residual shells and bagasse is described.

  4. Productivity and energy efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Lovins, H. [Rocky Mountain Inst., Snowmass, CO (United States)

    1995-12-31

    Energy efficient building and office design offers the possibility of significantly increased worker productivity. By improving lighting, heating and cooling, workers can be made more comfortable and productive. An increase of 1 percent in productivity can provide savings to a company that exceed its entire energy bill. Efficient design practices are cost effective just from their energy savings. The resulting productivity gains make them indispensable. This paper documents eight cases in which efficient lighting, heating, and cooling have measurably increased worker productivity, decreased absenteeism, and/or improved the quality of work performed. They also show that efficient lighting can measurably increase work quality by removing errors and manufacturing defects. The case studies presented include retrofit of existing buildings and the design of new facilities, and cover a variety of commercial and industrial settings. Each case study identifies the design changes that were most responsible for increased productivity. As the eight case studies illustrate, energy efficient design may be one of the least expensive ways for a business to improve the productivity of its workers and the quality of its product. (author). 15 refs.

  5. Product Placement in Cartoons

    Directory of Open Access Journals (Sweden)

    Irena Oroz Štancl

    2014-06-01

    Full Text Available Product placement is a marketing approach for integrating products or services into selected media content. Studies have shown that the impact of advertising on children and youth are large, and that it can affect their preferences and attitudes. The aim of this article is to determine the existing level of product placement in cartoons that are broadcast on Croatian television stations. Content analysis of cartoons in a period of one month gave the following results: in 30% of cartoons product placement was found; most product placement were visual ads, in 89%, however, auditory product placement and plot connection was also found. Most ads were related to toys and it is significant that even 65% of cartoons are accompanied by a large amount of products available on the Croatian market. This is the result of two sales strategies: brand licensing (selling popular cartoon characters to toys, food or clothing companies and cartoon production based on existing line of toys with the sole aim of making their sales more effective.

  6. Upgrading uncompetitive products economically

    DEFF Research Database (Denmark)

    Lu, Hua; Jensen, Christian Søndergaard

    2012-01-01

    for upgrading an uncompetitive product, and combine the solutions into a single solution. We also propose a spatial join-based solution that assumes P and T are indexed by an R-tree. Given a set of products in the same R-tree node, we derive three lower bounds on their upgrading costs. These bounds are employed...

  7. Green product innovation strategy

    NARCIS (Netherlands)

    Driessen, P.H.

    2005-01-01

    Over the last decades, companies have started to incorporate green issues in product innovation strategies. This dissertation studies green product innovation strategy, its antecedents and its outcomes. A three-stage approach is followed. In the first stage, the topic is explored and a preliminary

  8. Interleaved Product LDPC Codes

    OpenAIRE

    Baldi, Marco; Cancellieri, Giovanni; Chiaraluce, Franco

    2011-01-01

    Product LDPC codes take advantage of LDPC decoding algorithms and the high minimum distance of product codes. We propose to add suitable interleavers to improve the waterfall performance of LDPC decoding. Interleaving also reduces the number of low weight codewords, that gives a further advantage in the error floor region.

  9. Production (information sheets)

    NARCIS (Netherlands)

    2007-01-01

    Documentation sheets: Geo energy 2 Integrated System Approach Petroleum Production (ISAPP) The value of smartness 4 Reservoir permeability estimation from production data 6 Coupled modeling for reservoir application 8 Toward an integrated near-wellbore model 10 TNO conceptual framework for "E&P

  10. Spectra and strangeness production

    International Nuclear Information System (INIS)

    Miake, Yasuo.

    1990-01-01

    Particle production (π ± , K ± and p ± ) has been measured in p + A and Si + A reactions using the E802 spectrometer. The comparison of the particle production (rapidity distributions, momentum distributions, and the integrated yields ratios) between p + Be, p + Au and central Si + Au collisions and the effects of rescattering is discussed. 14 refs., 6 figs

  11. Marketing technologically advanced products

    NARCIS (Netherlands)

    Bender, Horst

    1989-01-01

    This paper calls for a merger of technology and marketing under a customer value perspective; for an enhancement of the traditional technological innovation orientation of the technology-based firm with a market thrust. It establishes technology-based products as product-service offerings that are

  12. Accelerated product development

    NARCIS (Netherlands)

    Langerak, F.; Seth, J.N.; Malhotra, N.K.

    2011-01-01

    Accelerated product development is a competitive strategy that seeks to reduce the development cycle time of new products. However, there has been little theoretical advancement and empirical model testing in the identification of the conditions under which cycle time reduction is appropriate, the

  13. Global product development

    DEFF Research Database (Denmark)

    Taylor, Thomas Paul; Ahmed-Kristensen, Saeema

    2016-01-01

    Selecting key performance indicators in conventional product development is a challenging task for project management and is compound by global product development. Informed from the findings of two in depth case studies conducted with large Danish manufacturing companies, in this paper we develo...

  14. Production process of VE

    International Nuclear Information System (INIS)

    1987-07-01

    This book tells of synopsis of production process of VE(value engineering), object selection method and establishment of target, collection of object information, design of function, write improvement suggestion, evaluation of improvement suggestion, all sorts of worksheets of production process of VE, explanation of IE, explanation of PERT.

  15. Improved wound care product

    DEFF Research Database (Denmark)

    2012-01-01

    The present invention pertains to use of sodium diacetate (NaHAc 2) as an antimicrobial agent against bacteria growing in biofilms. The aspects of the invention include a wound care product comprising sodium diacetate, a kit comprising a wound care product,and a methodof treating an infected wound....

  16. Productivity of Stream Definitions

    NARCIS (Netherlands)

    Endrullis, Jörg; Grabmayer, Clemens; Hendriks, Dimitri; Isihara, Ariya; Klop, Jan

    2007-01-01

    We give an algorithm for deciding productivity of a large and natural class of recursive stream definitions. A stream definition is called ‘productive’ if it can be evaluated continuously in such a way that a uniquely determined stream is obtained as the limit. Whereas productivity is undecidable

  17. The Productive Programmer

    CERN Document Server

    Ford, Neal

    2009-01-01

    Anyone who develops software for a living needs a proven way to produce it better, faster, and cheaper. The Productive Programmer offers critical timesaving and productivity tools that you can adopt right away, no matter what platform you use. Master developer Neal Ford details ten valuable practices that will help you elude common traps, improve your code, and become more valuable to your team.

  18. COMPETITIVE PRODUCT ADVANTAGES

    Directory of Open Access Journals (Sweden)

    Adrian MICU

    2006-01-01

    Full Text Available Cost advantages may be either internal or external. Internal economics of scope, scale, or experience, and external economies of focus or logistical integration, enable a company to produce some products at a lower cost than the competition. The coordination of pricing with suppliers, although not actually economizing resources, can improve the efficiency of pricing by avoiding the incrementalization of a supplier's nonincremental fixed costs and profit. Any of these strategies can generate cost advantages that are, at least in the short run, sustainable. Even cost advantages that are not sustainable, however, can generate temporary savings that are often the key to building more sustainable cost or product advantages later.. Even when a product's physical attributes are not readily differentiable, opportunities to develop product advantages remain. The augmented product that customers buy is more than the particular product or service exchanged. It includes all sorts of ancillary services and intangible relationships that make buying thesame product from one company less difficult, less risky, or more pleasant than buying from a competitor. Superior augmentation of the same basic product can add substantial value in the eyes of consumers, leading them to pay willingly what are often considerable price premiums.

  19. Tanzania : Productive Jobs Wanted

    OpenAIRE

    World Bank Group

    2014-01-01

    Over the past 18 months, the World Bank has been working on a comprehensive plan to address the challenge of productive jobs in Tanzania. This study represents a step towards a better understanding of how to promote job creation in Tanzania. Indeed, the growth of productive jobs is vital for alleviating poverty and promoting shared prosperity - two important goals of Tanzania's economic st...

  20. Risks of Leveraged Products

    NARCIS (Netherlands)

    A. Di Cesare (Antonio)

    2012-01-01

    textabstractLeveraged investments have become a fundamental feature of modern economies. The new financial products allow people to take greater-than-usual exposures to risk factors. This thesis analyzes several different aspects of the risks involved by some frequently used leveraged products:

  1. Quarkonia production at CDF

    International Nuclear Information System (INIS)

    Demina, R.

    1996-08-01

    We present the results of J/ψ, ψ', χ c and Υ(1S), Υ(2S), Υ(3S) production in the proton-antiproton collisions at √s = 1800 GeV measured with the CDF Detector. Contributions of different production mechanisms are discussed. 10 refs., 7 figs

  2. Optimal Product Placement.

    Science.gov (United States)

    Hsu, Chia-Ling; Matta, Rafael; Popov, Sergey V; Sogo, Takeharu

    2017-01-01

    We model a market, such as an online software market, in which an intermediary connects sellers and buyers by displaying sellers' products. With two vertically-differentiated products, an intermediary can place either: (1) one product, not necessarily the better one, on the first page, and the other hidden on the second page; or (2) both products on the first page. We show that it can be optimal for the intermediary to obfuscate a product-possibly the better one-since this weakens price competition and allows the sellers to extract a greater surplus from buyers; however, it is not socially optimal. The choice of which one to obfuscate depends on the distribution of search costs.

  3. Product Architecture Modularity Strategies

    DEFF Research Database (Denmark)

    Mikkola, Juliana Hsuan

    2003-01-01

    The focus of this paper is to integrate various perspectives on product architecture modularity into a general framework, and also to propose a way to measure the degree of modularization embedded in product architectures. Various trade-offs between modular and integral product architectures...... and how components and interfaces influence the degree of modularization are considered. In order to gain a better understanding of product architecture modularity as a strategy, a theoretical framework and propositions are drawn from various academic literature sources. Based on the literature review......, the following key elements of product architecture are identified: components (standard and new-to-the-firm), interfaces (standardization and specification), degree of coupling, and substitutability. A mathematical function, termed modularization function, is introduced to measure the degree of modularization...

  4. Thermophilic Biohydrogen Production

    DEFF Research Database (Denmark)

    Karakashev, Dimitar Borisov; Angelidaki, Irini

    2011-01-01

    Dark fermentative hydrogen production at thermophilic conditions is attractive process for biofuel production. From thermodynamic point of view, higher temperatures favor biohydrogen production. Highest hydrogen yields are always associated with acetate, or with mixed acetate- butyrate type...... fermentation. On the contrary the hydrogen yield decreases, with increasing concentrations of lactate, ethanol or propionate. Major factors affecting dark fermentative biohydrogen production are organic loading rate (OLR), pH, hydraulic retention time (HRT), dissolved hydrogen and dissolved carbon dioxide...... concentrations, and soluble metabolic profile (SMP). A number of thermophilic and extreme thermophilic cultures (pure and mixed) have been studied for biohydrogen production from different feedstocks - pure substrates and waste/wastewaters. Variety of process technologies (operational conditions...

  5. Production measurements at LHCb

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00392425

    2017-01-01

    The $\\text{LHC}b$ detector, with its excellent momentum resolution and flexible trigger strategy, is ideally suited for measuring heavy quark and quarkonia production properties. In addition, the new system of forward shower counters installed upstream and downstream has begun to be used, therefore the experiment is being suited to measure central exclusive production. The $\\text{LHC}b$ measurements of inclusive and differential cross-sections of the production of $J/\\psi$ resonance and $J/\\psi$ pairs, as well bottom quarks and $Z^0$ boson, based on Run 2 datasets are summarized. Finally, results on the prompt production of open charm hadrons and the exclusive production of charmonium are discussed.

  6. Hydrogen production by Cyanobacteria

    Directory of Open Access Journals (Sweden)

    Chaudhuri Surabhi

    2005-12-01

    Full Text Available Abstract The limited fossil fuel prompts the prospecting of various unconventional energy sources to take over the traditional fossil fuel energy source. In this respect the use of hydrogen gas is an attractive alternate source. Attributed by its numerous advantages including those of environmentally clean, efficiency and renew ability, hydrogen gas is considered to be one of the most desired alternate. Cyanobacteria are highly promising microorganism for hydrogen production. In comparison to the traditional ways of hydrogen production (chemical, photoelectrical, Cyanobacterial hydrogen production is commercially viable. This review highlights the basic biology of cynobacterial hydrogen production, strains involved, large-scale hydrogen production and its future prospects. While integrating the existing knowledge and technology, much future improvement and progress is to be done before hydrogen is accepted as a commercial primary energy source.

  7. Health products inspection

    International Nuclear Information System (INIS)

    Stoltz, M.

    2009-01-01

    To protect public health, the Health Products Inspection is a public service mission where the application of regulations concerning activities on human health products and cosmetic products is verified. This mission permits a global approach to assess the health products risk-based benefit and, in monitoring by laboratory testing and by on site inspections, to verify their compliance with appropriate regulations. The seventy five inspectors perform about eight hundred inspections per year, in France and abroad. These inspections are related to data provided in the health products assessment and also to manufacturing and delivery practices. The French inspection body is also involved in the training of foreign inspectors and in the harmonization of national, European and international practices either for operators than for the competent authorities. (author)

  8. Dry alcohol production plant

    Directory of Open Access Journals (Sweden)

    Stanković Mirjana S.

    2003-01-01

    Full Text Available The IGPC Engineering Department designed basic projects for dry alcohol production plant, using technology developed in the IGPC laboratories. Several projects were completed: technological, machine, electrical, automation. On the basis of these projects a production plant with a capacity of 40 m3/y was manufactured, at "Zorka Pharma", Šabac in 1995-1996. The product meets all quality demands, as well as environmental regulations. The dry alcohol production process is fully automatized. There is no waste in the process, neither gaseous, nor liquid. The chosen process provides safe operation according to temperature regime and resistance in the pipes, air purification columns and filters. Working at increased pressure is suitable for evaporation and condensation at increased temperatures. The production process can be controlled manually, which is necessary during start-up, and repairs.

  9. Exposure from consumer products

    International Nuclear Information System (INIS)

    Sadagopan, Geetha

    1998-01-01

    Consumer products containing radioactive material, are available in the market place to any member of public as off the shelf item and are intended for unrestricted use by them at home or for their personal use. Radioactivity may be involved in the product for several reasons: 1. ionising radiation from the radioactive material forms the basis of the particular functioning of the product like radioisotopes in smoke detectors, radio-luminous dials, etc.; 2. chemical/spectroscopic characteristics of the radioactive material and not its radioactivity is the basis for the functional property of the product like thoriated gas mantles, uranium in glass enamels, etc. and 3. radioactive materials could be naturally occurring in consumer products, but could increase in concentration after processing like increased uranium or thorium concentrations after the processing of rare earth oxides

  10. Chemical Product Design

    DEFF Research Database (Denmark)

    Gani, Rafiqul

    2004-01-01

    This paper highlights for a class of chemical products, the design process, their design with respect to the important issues, the need for appropriate tools and finally, lists some of the challenges and opportunities for the process systems engineering (PSE)/computer-aided process engineering...... (CAPE) community. The chemical products considered belong to the following types: chemical/biochemical/agrochemical products, coatings and solvents, food (nutraceuticals), HIM (household, industrial and institutional), personal care, pharmaceuticals and drugs. The challenges and opportunities...... are highlighted in terms of the needs for multi-level modeling with emphasis on property models that are suitable for computer-aided applications, flexible solution strategies that are able to solve a large range of chemical product design problems and finally, a systems chemical product design framework...

  11. Petroleum product market outlook

    International Nuclear Information System (INIS)

    2005-09-01

    The influence of petroleum market disturbances on price increases was discussed with particular reference to Hurricane Katrina and the loss of refinery production and damage to oil infrastructure in the United States. The supply of petroleum products in Canada will be very tight heading into the winter of 2006, despite the fact that Canadian refineries are operating at full capacity to ensure an adequate supply of gasoline and diesel fuel for consumers. In addition to refinery production, petroleum supplies are also determined by the adequacy of inventories and the efficiency of the infrastructure in place to deliver products to where they are needed. The lack of spare capacity has reduced the flexibility of the North American refining system to respond to further disruptions. Refiners were asked to provide information on 4 areas of their operations in order for Natural Resources Canada to analyze the short-term outlook for petroleum products markets. The 4 areas included refinery utilization rates and capability to increase production; any planned refinery turnaround that would affect petroleum product supplies; inventory levels compared to levels in previous years; and, any logistical problems that could affect product distribution. A graph depicting the relationship between Canadian production of gasoline and domestic sales clearly illustrated the seasonal nature of gasoline consumption and that production in Canada is much higher than consumption. Canada exports large volumes of gasoline, primarily to the United States eastern seabord from refineries in Atlantic Canada. The trend is similar for diesel fuel. Demand for both gasoline and diesel is expected to continue to grow in 2005 as high prices have had a limited impact on demand growth. In general, the Ontario/Quebec region is short of gasoline and must import gasoline during the summer months to cover the shortfall. It was noted that motorists and homeowners who heat with oil will bear the burden of higher

  12. Greenhouse production systems for people

    NARCIS (Netherlands)

    Giacomelli, G.A.; Sase, S.; Cramer, R.; Hoogeboom, J.; McKenzie, A.; Parbst, K.; Sacrascia-Mugnozza, G.; Selina, P.; Sharp, D.A.; Voogt, J.O.; Weel, van P.A.; Mears, D.

    2012-01-01

    Environmentally sound greenhouse production requires that: demand for market products is understood; greenhouse design addresses the climate circum-stances; input resources are available and consumed efficiently, and; there must be a reasonable balance of production products to the environmental

  13. A Framework For Product Development

    DEFF Research Database (Denmark)

    McAloone, Timothy Charles; Robotham, Antony John

    1999-01-01

    -aspect approach to product development; understanding the strategic conditions that affect product development; developing a coherent approach to product quality based on product-life thinking; addressing environmental needs in a proactive manner through innovation techniques; and understanding both...

  14. Product sounds : Fundamentals and application

    NARCIS (Netherlands)

    Ozcan-Vieira, E.

    2008-01-01

    Products are ubiquitous, so are the sounds emitted by products. Product sounds influence our reasoning, emotional state, purchase decisions, preference, and expectations regarding the product and the product's performance. Thus, auditory experience elicited by product sounds may not be just about

  15. Uranium production from phosphates

    International Nuclear Information System (INIS)

    Ketzinel, Z.; Folkman, Y.

    1979-05-01

    According to estimates of the world's uranium consumption, exploitation of most rich sources is expected by the 1980's. Forecasts show that the rate of uranium consumption will increase towards the end of the century. It is therefore desirable to exploit poor sources not yet in use. In the near future, the most reasonable source for developing uranium is phosphate rock. Uranium reserves in phosphates are estimated at a few million tons. Production of uranium from phosphates is as a by-product of phosphate rock processing and phosphoric acid production; it will then be possible to save the costs incurred in crushing and dissolving the rock when calculating uranium production costs. Estimates show that the U.S. wastes about 3,000 tons of uranium per annum in phosphoric acid based fertilisers. Studies have also been carried out in France, Yugoslavia and India. In Israel, during the 1950's, a small plant was operated in Haifa by 'Chemical and Phosphates'. Uranium processes have also been developed by linking with the extraction processes at Arad. Currently there is almost no activity on this subject because there are no large phosphoric acid plants which would enable production to take place on a reasonable scale. Discussions are taking place about the installation of a plant for phosphoric acid production utilising the 'wet process', producing 200 to 250,000 tons P 2 O 5 per annum. It is necessary to combine these facilities with uranium production plant. (author)

  16. Manual of radioisotope production

    International Nuclear Information System (INIS)

    1966-01-01

    The Manual of Radioisotope Production has been compiled primarily to help small reactor establishments which need a modest programme of radioisotope production for local requirements. It is not comprehensive, but gives guidance on essential preliminary considerations and problems that may be met in the early stages of production. References are included as an aid to the reader who wishes to seek further in the extensive literature on the subject. In preparing the Manual, which is in two parts, the Agency consulted several Member States which already have long experience in radioisotope production. An attempt has been made to condense this experience, firstly, by setting out the technical and economic considerations which govern the planning and execution of an isotope programme and, secondly, by providing experimental details of isotope production processes. Part I covers topics common to all radioisotope processing, namely, laboratory design, handling and dispensing of radioactive solutions, quality control, measurement and radiological safety. Part II contains information on the fifteen radioisotopes in most common use. These are bromine-82, cobalt-58, chromium-51, copper-64, fluorine-18, gold-198, iodine-131, iron-59, magnesium-28, potassium-42, sodium-24, phosphorus-32, sulphur-35, yttrium-90 and zinc-65. Their nuclear properties are described, references to typical applications are given and published methods of production are reviewed; also included are descriptions in detail of the production processes used at several national atomic energy organizations. No attempt has been made to distinguish the best values for nuclear data or to comment on the relative merits of production processes. Each process is presented essentially as it was described by the contributor on the understanding that critical comparisons are not necessary for processes which have been well tried in practical production for many years. The information is presented as a guide to enable

  17. Sicilian potential biogas production

    Directory of Open Access Journals (Sweden)

    Antonio Comparetti

    2013-09-01

    Full Text Available This study is aimed at predicting the Sicilian potential biogas production, using the Organic Fraction of Municipal Solid Waste (OFMSW, animal manure and food industry by-products, in a region where only one biogas plant using MSW and one co-digestion plant are nowadays available. The statistical data about OFMSW, the number of animals bred in medium and large farms and the amounts of by-products of food processing industries were evaluated, in order to compute the Sicilian potential biogas and energy production. The OFMSW produced in Sicily, that is 0.8 million tons ca. per year (37% of MSW, could be used in a bio-reactor, together with other raw materials, for Anaerobic Digestion (AD process, producing biogas and “digestate”. Moreover, 3.03 million tons ca. of manure, collected in medium and large animal husbandry farms (where cows, pigs and poultry are bred, and 350 thousand tons ca. of by-products, collected in food processing industries (pomace from olive oil mills and grape marc from wineries, might be used for AD process. The Sicilian potential biogas production from the AD of the above raw materials is 170.2 millions of m3, that is equal to 1023.4 GWh of energy per year, of which 484 GWh from animal manure, 303 GWh from OFMSW and 236.4 GWh from food industry by-products. The highest biogas production is in the province of Palermo (35.6 millions of m3, Ragusa (30.8 millions of m3 and Catania (22.8 millions of m3, having a potential energy production of 213.8, 185 and 137 GWh, respectively.

  18. Concurrency in product realization

    Science.gov (United States)

    Kelly, Michael J.

    1994-03-01

    Technology per se does not provide a competitive advantage. Timely exploitation of technology is what gives the competitive edge, and this demands a major shift in the product development process and management of the industrial enterprise. `Teaming to win' is more than a management theme; it is the disciplined engineering practice that is essential to success in today's global marketplace. Teaming supports the concurrent engineering practices required to integrate the activities of people responsible for product realization through achievement of shorter development cycles, lower costs, and defect-free products.

  19. Radiation processed polysaccharide products

    International Nuclear Information System (INIS)

    Nguyen, Quoc Hien

    2007-01-01

    Radiation crosslinking, degradation and grafting techniques for modification of polymeric materials including natural polysaccharides have been providing many unique products. In this communication, typical products from radiation processed polysaccharides particularly plant growth promoter from alginate, plant protector and elicitor from chitosan, super water absorbent containing starch, hydrogel sheet containing carrageenan/CM-chitosan as burn wound dressing, metal ion adsorbent from partially deacetylated chitin were described. The procedures for producing those above products were also outlined. Future development works on radiation processing of polysaccharides were briefly presented. (author)

  20. Versioning of printed products

    Science.gov (United States)

    Tuijn, Chris

    2005-01-01

    During the definition of a printed product in an MIS system, a lot of attention is paid to the production process. The MIS systems typically gather all process-related parameters at such a level of detail that they can determine what the exact cost will be to make a specific product. This information can then be used to make a quote for the customer. Considerably less attention is paid to the content of the products since this does not have an immediate impact on the production costs (assuming that the number of inks or plates is known in advance). The content management is typically carried out either by the prepress systems themselves or by dedicated workflow servers uniting all people that contribute to the manufacturing of a printed product. Special care must be taken when considering versioned products. With versioned products we here mean distinct products that have a number of pages or page layers in common. Typical examples are comic books that have to be printed in different languages. In this case, the color plates can be shared over the different versions and the black plate will be different. Other examples are nation-wide magazines or newspapers that have an area with regional pages or advertising leaflets in different languages or currencies. When considering versioned products, the content will become an important cost factor. First of all, the content management (and associated proofing and approval cycles) becomes much more complex and, therefore, the risk that mistakes will be made increases considerably. Secondly, the real production costs are very much content-dependent because the content will determine whether plates can be shared across different versions or not and how many press runs will be needed. In this paper, we will present a way to manage different versions of a printed product. First, we will introduce a data model for version management. Next, we will show how the content of the different versions can be supplied by the customer

  1. OPEC's production policies

    International Nuclear Information System (INIS)

    Mabro, R.

    1989-01-01

    An enlightening study on the workings of OPEC its policies and practices, agreements and disagreements, and how each affects the world petroleum market. The book explores OPEC's production patterns and quota agreements and the relationship between production and pricing policies. Political compromises that have hindered OPEC production agreements and their successful implementation are covered - compromises such as concessions made to the U.A.E. and those resulting from the Gulf war. Notable historical events are cited, and a look into the future at what we can expect of OPEC in coming years concludes the study

  2. Production of Metabolites

    DEFF Research Database (Denmark)

    2011-01-01

    A recombinant micro-organism such as Saccharomyces cerevisiae which produces and excretes into culture medium a stilbenoid metabolite product when grown under stilbenoid production conditions, which expresses in above native levels a ABC transporter which transports said stilbenoid out of said...... micro-organism cells to the culture medium. The genome of the Saccharomyces cerevisiae produces an auxotrophic phenotype which is compensated by a plasmid which also expresses one or more of said enzymes constituting said metabolic pathway producing said stilbenoid, an expression product of the plasmid...

  3. Entropy Production of Stars

    Directory of Open Access Journals (Sweden)

    Leonid M. Martyushev

    2015-06-01

    Full Text Available The entropy production (inside the volume bounded by a photosphere of main-sequence stars, subgiants, giants, and supergiants is calculated based on B–V photometry data. A non-linear inverse relationship of thermodynamic fluxes and forces as well as an almost constant specific (per volume entropy production of main-sequence stars (for 95% of stars, this quantity lies within 0.5 to 2.2 of the corresponding solar magnitude is found. The obtained results are discussed from the perspective of known extreme principles related to entropy production.

  4. Property Rights and Productivity

    DEFF Research Database (Denmark)

    Newman, Carol; Tarp, Finn; Van Den Broeck, Katleen

    2015-01-01

    This paper explores the effect of land titling on agricultural productivity in Vietnam and the productivity effects of single versus joint titling for husband and wife. Using a plot-fixed-effects approach our results show that obtaining a land title is associated with higher yields, for both...... individually and jointly held titles. We conclude that there is no tradeoff between joint titling and productivity, and so joint titles are potentially an effective way to improve women’s bargaining power within the household with no associated efficiency losses....

  5. SMART product innovation

    DEFF Research Database (Denmark)

    Cramer-Petersen, Claus L.; Ahmed-Kristensen, Saeema; Li, Xuemeng

    2016-01-01

    Among the inspirations for the SMART process is “design to customer value,” where products are modified based on a thorough understanding of customers that allows product developers to eliminate features that do not affect customer satisfaction while including only the elements and functionality...... that customers really appreciate. The SMART process includes methods to understand product value for the customer and the user; analyse the cost of components and processes; combine customer value and cost reduction potentials into feasible, high-value concepts; and generate prototypes that can be tested...... with users and customers....

  6. Will marine productivity wane?

    Science.gov (United States)

    Laufkötter, Charlotte; Gruber, Nicolas

    2018-03-01

    If marine algae are impaired severely by global climate change, the resulting reduction in marine primary production would strongly affect marine life and the ocean's biological pump that sequesters substantial amounts of atmospheric carbon dioxide in the ocean's interior. Most studies, including the latest generation of Earth system models, project only moderate global decreases in biological production until 2100 (1, 2), suggesting that these concerns are unwarranted. But on page 1139 of this issue, Moore et al. (3) show that this conclusion might be shortsighted and that there may be much larger long-term changes in ocean productivity than previously appreciated.

  7. Glocalized Production: The Evolution of Global Production

    DEFF Research Database (Denmark)

    Chavez, Marianna; Bilberg, Arne

    In light of the challenges of the current globalized production model, four global Danish companies were interviewed with the purpose of exploring “glocalized production” as the new step and solution to the challenges of the “global village.” The research sought to gauge the interest on “glocalized...... production” by key managers of these companies, and test three hypotheses: that a definition could be established from “glocalization” aspects, that it will reduce supply chain complexity, and that it can affect organizational trust levels. The results are presented along with suggestions to pave the way...

  8. Nickel catalysts for internal reforming in molten carbonate fuel cells

    NARCIS (Netherlands)

    Berger, R.J.; Berger, R.J.; Doesburg, E.B.M.; Doesburg, E.B.M.; van Ommen, J.G.; Ross, J.R.H.; Ross, J.R.H.

    1996-01-01

    Natural gas may be used instead of hydrogen as fuel for the molten carbonate fuel cell (MCFC) by steam reforming the natural gas inside the MCFC, using a nickel catalyst (internal reforming). The severe conditions inside the MCFC, however, require that the catalyst has a very high stability. In

  9. Product numerical range in a space with tensor product structure

    OpenAIRE

    Puchała, Zbigniew; Gawron, Piotr; Miszczak, Jarosław Adam; Skowronek, Łukasz; Choi, Man-Duen; Życzkowski, Karol

    2010-01-01

    We study operators acting on a tensor product Hilbert space and investigate their product numerical range, product numerical radius and separable numerical range. Concrete bounds for the product numerical range for Hermitian operators are derived. Product numerical range of a non-Hermitian operator forms a subset of the standard numerical range containing the barycenter of the spectrum. While the latter set is convex, the product range needs not to be convex nor simply connected. The product ...

  10. Soy production and certification

    DEFF Research Database (Denmark)

    Tomei, Julia; Semino, Stella Maris; Paul, Helena

    2010-01-01

    With the rising emphasis on biofuels as a potential solution to climate change, this paper asks whether certification schemes, developed to promote sustainable feedstock production, are able to deliver genuine sustainability benefits. The Round Table on Responsible Soy (RTRS) is a certification...... the social and environmental impacts of soybean production can be mitigated by the RTRS. It concludes that at present certification schemes are unlikely to be able to address either the institutional challenges associated with their implementation or the detrimental impacts of the additional demand generated...... scheme that aims to promote responsible soy production through the development of principles and criteria. However, can and does this initiative address the negative impacts associated with the intensive production of soy? Taking the example of soy biodiesel produced in Argentina, this paper asks whether...

  11. Productive and Unproductive Competition

    DEFF Research Database (Denmark)

    Guerra, Alice; Luppi, Barbara; Parisi, Francesco

    Conventional theories of competition classify contests as being either “productive,” when the competitive efforts generate a surplus for society, or “unproductive,” when competition generates no social surplus and merely distributes already existing resources. These two discrete categories of com...... and socially optimal levels of competition in the full range of intermediate cases, as well as in the extremum cases of destructive and super-productive competition.......Conventional theories of competition classify contests as being either “productive,” when the competitive efforts generate a surplus for society, or “unproductive,” when competition generates no social surplus and merely distributes already existing resources. These two discrete categories...... of competition create a division of real-world situations into analytical categories that fails to recognize the entire spectrum of competitive activities. Taking the existing models of productive and unproductive competition as benchmark idealizations, this paper explores the relationship between the privately...

  12. Segregation in cast products

    Indian Academy of Sciences (India)

    Unknown

    The agreement with experimental data is mostly qualitative. The paper also ... For example, a high degree of positive segregation in the central region .... solute in a cast product, important ones being: size of casting, rate of solidification, mode.

  13. Household Products Database

    Science.gov (United States)

    ... your bathroom, and on the shelves in your laundry room? Learn more about what's in these products, ... MD 20894 National Institutes of Health , Health & Human Services Customer Service: tehip@teh.nlm.nih.gov Last ...

  14. PRODUCTIVITY CHARACTERISTICS AND DEVELOPMENT ...

    African Journals Online (AJOL)

    ACSS

    2016-02-23

    Feb 23, 2016 ... The pulp and kernels of the fruit are the only by-products marketed by women and mainly girls who .... characteristics of trees and fruit involved, 30 adult hermaphrodite ..... Ethnobotanical research and traditional health care in.

  15. Smallholder pig production

    DEFF Research Database (Denmark)

    Braae, Uffe Christian; Ngowi, Helena; Johansen, Maria Vang

    2013-01-01

    A cross-sectional study was carried out in the Mbeya Region, Tanzania, with the aim of describing the distribution and diversity of ectoparasites on pigs, within confinement and free-range production systems of smallholder farms. A total of 128 farms were surveyed, with 96 practising confinement...... and 32 practising free-range production systems. The prevalence of ectoparasites on pigs within confinement and free-range production systems was 24% and 84%, respectively. Logistic regression analyses revealed that keeping pigs in a free-range system and the presence of neighbouring pigs were risk...... although highly prevalent within both production systems. Keeping pigs in a free-range system and contact with neighbouring pigs were main risk factors for the presence of ectoparasites. Confinement was highly effective as a preventive tool against hard ticks....

  16. Peanut Product Recalls

    Data.gov (United States)

    U.S. Department of Health & Human Services — This list includes human and pet food subject to recall in the United States since January 2009 related to peanut products distributed by Peanut Corporation of...

  17. Products by Glycation Process

    Directory of Open Access Journals (Sweden)

    Liliana Ortega

    2015-01-01

    Full Text Available The antioxidant properties of sweet and acid whey products were incremented by polymerization of their proteins by glycation of whey protein concentrates (WPC and their hydrolyzates (WPCH with ribose and glucose in individual experiments under similar concentration. Heating at 50°C during 20 h maximum and pH 7 and pH 9 were used in all tests. The higher activity was found in WPC glycosylates products with ribose at pH 7 and heating during 10–15 h. In comparable form, antioxidant activity in WPCH was incremented by prior hydrolysis to glycation with 25–45% of hydrolysis degree. Further functional properties of whey proteins (solubility, emulsion, and foam were also improved by the polymerization with ribose. The color of polymerized products due to Maillard reactions was associated with antioxidant activity of each compound; however comparative color in glycosylates products with glucose and ribose did not show this effect.

  18. Vegetable Production System (Veggie)

    Data.gov (United States)

    National Aeronautics and Space Administration — The Vegetable Production System (Veggie) was developed to be a simple, easily stowed, high growth volume, low resource facility capable of producing fresh vegetables...

  19. NSP Production Reports

    Data.gov (United States)

    Department of Housing and Urban Development — NSP Production Reports contain cumulative data on units assisted with NSP funds. An NSP grantee reports on the accomplishment of an activity when it meets an End...

  20. OSU Chlorophyll Bloom Product

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This product was developed for the Oregon coast based on the observed change between running 8-day composite chlorophyll-a (CHL) data obtained by the MODerate...

  1. Radioactivity in consumer products

    Energy Technology Data Exchange (ETDEWEB)

    Moghissi, A.A.; Paras, P.; Carter, M.W.; Barker, R.F. (eds.)

    1978-08-01

    Papers presented at the conference dealt with regulations and standards; general and biological risks; radioluminous materials; mining, agricultural, and construction materials containing radioactivity; and various products containing radioactive sources.

  2. Kronecker Products on Preconditioning

    KAUST Repository

    Gao, Longfei

    2013-01-01

    techniques have become increasingly popular due to their great potential on large scale computation. In this work, we present preconditioning techniques for linear systems built with tensor product basis functions. Efficient algorithms are designed

  3. Challenges in biogas production

    DEFF Research Database (Denmark)

    Rennuit, Charlotte

    2017-01-01

    Anaerobic digestion (AnD) is a sustainable process combining waste treatment, nutrient recycling and energy production which can contribute to limit climate change and environmental problems. However, in order for this technique to be more widely used, production of biogas from available wastes...... from a mixture of pig manure and other waste materials by separating the solid fraction of digestate and recycling it back to the digester. It is shown that separation and recycling of the dry matter rich solid fraction could successfully increase biogas production and a preliminary economic evaluation...... showed a potential increase of 1.9 to 6.8€ per ton of biomass treated. In the second part of this study, a biological treatment to improve energy production from wastewater sludge was investigated. Wastewater sludge was subjected to thermophilic aerobic digestion (TAD) from 2h to 5d. Increase in biogas...

  4. Proprietary policy and production

    Czech Academy of Sciences Publication Activity Database

    Jeong, Byeongju

    -, č. 287 (2006), s. 1-14 ISSN 1211-3298 Institutional research plan: CEZ:MSM0021620846 Keywords : proprietary regime * direct production * model Subject RIV: AH - Economics http://www.cerge-ei.cz/pdf/wp/Wp287.pdf

  5. Measuring multifactor productivity growth

    Czech Academy of Sciences Publication Activity Database

    Wölfl, A.; Hájková, Dana

    -, 2007/5 (2007), s. 1-45 Institutional research plan: CEZ:AV0Z70850503 Keywords : multifactor productivity growth * GDP growth * measuring Subject RIV: AH - Economics http://www.oecd.org/dataoecd/61/17/39522985.pdf

  6. Products in fusion systems

    DEFF Research Database (Denmark)

    Henke, Ellen

    2013-01-01

    We revisit the notion of a product of a normal subsystem with a p-subgroup as defined by Aschbacher (2011) [Asc11, Chapter 8]. In particular, we give a previously unknown, more transparent construction....

  7. From Environment to Production

    KAUST Repository

    Kodzius, Rimantas; Behzad, H.; Archer, John A.C.; Bajic, Vladimir B.; Gojobori, Takashi

    2014-01-01

    Using Metagenomic analysis, computational modeling, single cell and genome editing technologies, we are expressing desired microbial genes and their networks in suitable hosts for mass production of energy, food, and fine chemicals

  8. Top Production at LHCb

    CERN Multimedia

    Santana Rangel, Murilo

    2015-01-01

    Single and pair top production in the forward direction at the LHC allows for precision tests of the Standard Model. The observation of top quarks in 7 and 8 TeV data and prospects for precision measurements are shown.

  9. Processed Products Database System

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Collection of annual data on processed seafood products. The Division provides authoritative advice, coordination and guidance on matters related to the collection,...

  10. Product lifecycle management

    CERN Document Server

    Stark, John

    2016-01-01

    This third edition updates and adds to the successful second edition and gives the reader a thorough description of PLM, providing them with a full understanding of the theory and the practical skills to implement PLM within their own business environment. This new and expanded edition is fully updated to reflect the many technological and management advances made in PLM since the release of the second edition. Describing the environment in which products are developed, manufactured and supported, before addressing the Five Pillars of PLM: business processes, product data, PLM applications, Organisational Change Management (OCM) and Project Management, this book explains what Product Lifecycle Management is, and why it’s needed. The final part of the book addresses the PLM timeline, showing the typical steps and activities of a PLM project or initiative. “Product Lifecycle Management” will broaden the reader’s understanding of PLM, nurturing the skills needed to implement PLM successfully and to achi...

  11. From Environment to Production

    KAUST Repository

    Kodzius, Rimantas

    2014-04-29

    Using Metagenomic analysis, computational modeling, single cell and genome editing technologies, we are expressing desired microbial genes and their networks in suitable hosts for mass production of energy, food, and fine chemicals

  12. Food Product Dating

    Science.gov (United States)

    ... Standard Forms FSIS United States Department of Agriculture Food Safety and Inspection Service About FSIS District Offices ... Web Content Viewer (JSR 286) Actions ${title} Loading... Food Product Dating "Best if Used By" is a ...

  13. Minimum entropy production principle

    Czech Academy of Sciences Publication Activity Database

    Maes, C.; Netočný, Karel

    2013-01-01

    Roč. 8, č. 7 (2013), s. 9664-9677 ISSN 1941-6016 Institutional support: RVO:68378271 Keywords : MINEP Subject RIV: BE - Theoretical Physics http://www.scholarpedia.org/article/Minimum_entropy_production_principle

  14. Forecast Icing Product

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Forecast Icing Product (FIP) is an automatically-generated index suitable for depicting areas of potentially hazardous airframe icing. The FIP algorithm uses...

  15. Bottonium production at LEP

    International Nuclear Information System (INIS)

    Abraham, K.J.

    1989-03-01

    The production of γ ('3S 1 ) and η b ( 1 S 0 ) with two gluons from Z decay is investigated. It is found that at LEP luminosities experimental detection will hardly be feasible. (author). 9 refs.; 1 fig

  16. Current Icing Product

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Current Icing Product (CIP) is an automatically-generated index suitable for depicting areas of potentially hazardous airframe icing. The CIP algorithm combines...

  17. Produção de snacks funcionais à base de farinha de soja e polvilho azedo Production of functional snacks from soybean flour and sour cassava starch

    Directory of Open Access Journals (Sweden)

    Magali Leonel

    2010-06-01

    Full Text Available Este trabalho teve por objetivo avaliar o efeito da temperatura de extrusão e da porcentagem de farinha de soja sobre a expansão (IE, o índice de absorção de água (IAA, o índice de solubilidade em água (ISA, a cor (L*, a* e b* e a dureza de biscoitos extrusados. O processo de extrusão seguiu o delineamento central composto rotacional para dois fatores, totalizando 11 tratamentos. Os resultados obtidos mostraram que a temperatura e a porcentagem de farinha de soja tiveram efeitos significativos sobre as propriedades físicas dos produtos. Nas condições intermediárias de temperatura e baixa porcentagem de farinha de soja (10%, é possível obter biscoitos funcionais de mandioca com elevada expansão, índices intermediários de absorção e solubilidade em água, cor clara e baixa dureza.This study aimed to evaluate the effect of the extrusion temperature and the percentage of soybean flour in mixes on the expansion index (EI, water absorption index (WAI, water solubility index(WSI; color (L *, a *, b * and hardness of extruded sour cassava snacks. The extrusion process followed the rotational central composite design for two factors, totalizing 11 treatments. The results showed that the extrusion temperature and percentage of soybean flour in mixes had significant effects on the physical properties of products. Under the conditions of intermediate temperature and low percentage of soybean meal is possible to obtain function cassava snacks with high expansion, intermediate index of absorption and solubility in water, light color and low hardness.

  18. Acetone production by methylobacteria.

    Science.gov (United States)

    Thomson, A W; O'Neill, J G; Wilkinson, J F

    1976-09-01

    An accumulation of acetone was observed during the metabolism of ethane and products of ethane oxidation by washed suspensions of Methylosinus trichosporium OB3B. This strain possessed an acetoacetate decarboxylase and 3-hydroxybutyrate dehydrogenase, and a decline in poly-beta-hydroxybutyric acid occurred under the same conditions as acetone formation. A pathway of acetone production from poly-beta-hydroxybutyric acid via 3-hydroxybutyrate and acetoacetate was suggested.

  19. Pretreated densified biomass products

    Science.gov (United States)

    Dale, Bruce E; Ritchie, Bryan; Marshall, Derek

    2014-03-18

    A product comprising at least one densified biomass particulate of a given mass having no added binder and comprised of a plurality of lignin-coated plant biomass fibers is provided, wherein the at least one densified biomass particulate has an intrinsic density substantially equivalent to a binder-containing densified biomass particulate of the same given mass and h a substantially smooth, non-flakey outer surface. Methods for using and making the product are also described.

  20. Productivity Improvement for Engineers.

    Science.gov (United States)

    1981-08-01

    organization and the likely positions or types of work that will be required of the engineer in the future. There should therefore, be a balance of...Mall, P., Improving Total Productivity, John Wiley & Sons, New York, 1978. Miller, R.B., Participative Management-Quality of Worklife and Job Enrichment...Noyes Data Corp., Park Ridge, N.J., 1977. Hughes Aircraft Co., R & D Productivity-Study Report, Hughes Aircraft Co., Culver City , California, 1974

  1. Conditions for industrial production

    DEFF Research Database (Denmark)

    Jensen, Karsten Ingerslev; Schultz, Jørgen Munthe; Brauer, H.

    1996-01-01

    The possibility of an industrial aerogel glazing production is discussed with respect to sample size, sales volume and prices. Different ways of an industrial assembling line is outlined and the total costs of a 1 square meter aerogel glazing is calculated.......The possibility of an industrial aerogel glazing production is discussed with respect to sample size, sales volume and prices. Different ways of an industrial assembling line is outlined and the total costs of a 1 square meter aerogel glazing is calculated....

  2. Mycotoxins in poultry production

    OpenAIRE

    Resanović Radmila M.; Nešić Ksenija D.; Nesić Vladimir D.; Palić Todor D.; Jaćević Vesna M.

    2009-01-01

    All poultry is sensitive to mycotoxins. This partly depends on the type, age and production categories of poultry, their living conditions and nutritive status and partly on the type, quantity and duration of mycotoxin ingestion. The presence of mycotoxins results in significant health disorders and a decrease in production performances. This leads to considerable economic loss for the poultry industry - either direct losses, i.e. death of the poultry or the indirect ones, i.e. the decrease i...

  3. Goat production check list

    DEFF Research Database (Denmark)

    Henriksen, Jørgen; Nielsen, Mette Benedicte Olaf; Madsen, Jørgen

    2009-01-01

    This check list, financed by DanChurchAid, highlights all issues should be carefully investigated before investing in distribution of goats and in interventions to assist poor rural communities to improve their livelihood through goat production.......This check list, financed by DanChurchAid, highlights all issues should be carefully investigated before investing in distribution of goats and in interventions to assist poor rural communities to improve their livelihood through goat production....

  4. New product pricing

    International Nuclear Information System (INIS)

    Wilkinson, V.K.

    1981-01-01

    One of the most uncertain elements in budget planning is estimating production costs of items that have heretofore only been produced in prototype configurations and quantities. This paper examines the design and development of a mathematical model which computes appropriate prices for new and unique products. The resulting model offers a producer a fair return on his investment and the consumer a fair purchase price

  5. Selling new products

    OpenAIRE

    Borgh, van der, W.

    2012-01-01

    As we proceed into the 21st century, companies are facing increasingly complex and dynamic business environments. Many organizations have to deal with intense competition as more products are introduced faster, with shorter life cycles, and less competitive differentiation. Consequently, companies are pushed to not only be more adept in product development but also in capitalizing on these innovative activities. However, while companies have become more successful in inventing and developing ...

  6. Managing Joint Production Motivation

    DEFF Research Database (Denmark)

    Lindenberg, Siegwart; Foss, Nicolai Juul

    2011-01-01

    We contribute to the microfoundations of organizational performance by proffering the construct of joint production motivation. Under such motivational conditions individuals see themselves as part of a joint endeavor, each with his or her own roles and responsibilities; generate shared...... representations of actions and tasks; cognitively coordinate cooperation; and choose their own behaviors in terms of joint goals. Using goal-framing theory, we explain how motivation for joint production can be managed by cognitive/symbolic management and organizational design....

  7. Radioactive consumer products

    International Nuclear Information System (INIS)

    Sato, Otomaru

    1981-01-01

    Present situation of utilizing the radioactive consumer products and exposure dose were reviewed with published data. Practically, consumer products are divided into three categories, (1) radioactive nuclides intentionally incorporated into radioluminous dye, ionization chambers for smoke detector, eliminator of static electricity, and glow lamp (2) natural radioactive nuclides contained in false teeth, porcelain, glass, and gas mantle (3) natural radioactive nuclides accumulated as industrial waste at the consumption of coal, petroleum, and natural gas or in fertilizer and materials for construction. (Nakanishi, T.)

  8. PRODUCTION OF TRITIUM

    Science.gov (United States)

    Jenks, G.H.; Shapiro, E.M.; Elliott, N.; Cannon, C.V.

    1963-02-26

    This invention relates to a process for the production of tritium by subjecting comminuted solid lithium fluoride containing the lithium isotope of atomic mass number 6 to neutron radiation in a self-sustaining neutronic reactor. The lithium fiuoride is heated to above 450 deg C. in an evacuated vacuum-tight container during radiation. Gaseous radiation products are withdrawn and passed through a palladium barrier to recover tritium. (AEC)

  9. Heavy quark production

    International Nuclear Information System (INIS)

    Rossi, L.; Genoa Univ.

    1992-01-01

    The hadro- and photo-production of charm and beauty particles are reviewed. The most recent experimental results on charm are compared with the next-to-leading order perturbative QCD calculations as a check of the theory. Results on beauty production at hadronic colliders are presented and indicate that these machines may also be regarded as beauty factories. (author) 21 refs.; 18 figs.; 2 tabs

  10. MICROORGANISMS IN CONFECTIONERY PRODUCTS

    Directory of Open Access Journals (Sweden)

    Ľubomíra Juhaniaková

    2011-08-01

    Full Text Available The aim of this work was to determine microbiological quality of confectionery products. In confectionery products microbiological parameters: coliforms bacteria, microscopic filamentous fungi and yeasts, Salmonella sp. and staphylococci were observed. The confectionery products were evaluated: Kremes - honey cube, roll Arabica, roll Rona, roll stuffed with apricot cream, honey cube, pinwheel caramel, Sachovnica cut, Zora cut and curd cake. For microbiological tests 18 samples of confectionery products were used. Numbers of coliforms bacteria in confectionery products ranged from <1x101 to 4x102 cfu.g-1, the number of microscopic fungi ranged from 0 to <1x101 cfu.g-1, the number of yeasts from <1x101 to 5.5x102 cfu.g-1, cells of Salmonella sp. were not detected and the number of staphylococci was from 0 to <1x101 cfu.g-1. All investigated samples of confectionary products were in accordance with the Codex Alimentarius of the Slovak Republic.

  11. Material and energy productivity.

    Science.gov (United States)

    Steinberger, Julia K; Krausmann, Fridolin

    2011-02-15

    Resource productivity, measured as GDP output per resource input, is a widespread sustainability indicator combining economic and environmental information. Resource productivity is ubiquitous, from the IPAT identity to the analysis of dematerialization trends and policy goals. High resource productivity is interpreted as the sign of a resource-efficient, and hence more sustainable, economy. Its inverse, resource intensity (resource per GDP) has the reverse behavior, with higher values indicating environmentally inefficient economies. In this study, we investigate the global systematic relationship between material, energy and carbon productivities, and economic activity. We demonstrate that different types of materials and energy exhibit fundamentally different behaviors, depending on their international income elasticities of consumption. Biomass is completely inelastic, whereas fossil fuels tend to scale proportionally with income. Total materials or energy, as aggregates, have intermediate behavior, depending on the share of fossil fuels and other elastic resources. We show that a small inelastic share is sufficient for the total resource productivity to be significantly correlated with income. Our analysis calls into question the interpretation of resource productivity as a sustainability indicator. We conclude with suggestions for potential alternatives.

  12. Particle production by neutrinos

    International Nuclear Information System (INIS)

    Schreiner, P.

    1979-01-01

    A review is given of particle production by neutrinos in charged-current inclusive and exclusive channels. The production rates for various particles in neutrino-nucleon interactions at a beam energy of 25 GeV are compared. The mesons are, of course, dominated by pion production. The p 0 (760) rate is an order of magnitude smaller. Strange and charm pseudoscalar mesons are a further factor of two down in rate. The strange vector mesons are suppressed by more than an order of magnitude relative to K 0 production; however, the charmed D* + (2010) is only a factor of two smaller in rate than the D 0 (1860). With regards to the baryons, most of them are, of course, nucleons. The Λ 0 and Y*(1385) rates are down by one and two orders of magnitudes, respectively. The lower limit on the charmed Σ/sub c/ ++ baryon rate is similar to the Y*(1385) rate. Finally, the quasielastic and one-pion production exclusive channels have about the same cross section as that of the D* + ; associated production of strange particles in the νn → μ - K + Λ channel and the ΔS = +ΔΩ process νp → μ - pK + are down by factors of five and twenty, respectively, compared to the quasielastic cross section

  13. Whither tobacco product regulation?

    Science.gov (United States)

    McNeill, Ann; Hammond, David; Gartner, Coral

    2012-03-01

    Despite decades of industry innovation and regulatory efforts, the harmfulness of conventional cigarettes has not changed. There are several pitfalls in this area, including the long time lag before health impacts of product regulatory changes become apparent, the danger of consumers deriving false reassurance of lesser harm in the interim period, the lack of relevant expertise and the lack of an internationally agreed and evidence-based strategic approach. Articles 9 and 10 of the Framework Convention on Tobacco Control provide the potential for such a global strategy, and knowledge and research has increased significantly over recent years. However, there are huge opportunity costs in implementing product disclosure and regulatory strategies: most national regulators have very limited human and financial resources, which should be focused on other evidence-based tobacco control interventions. We believe therefore that it is now time to abandon the notion of safe or safer cigarettes while moving consumers towards cleaner nicotine products as soon as possible. In parallel to this, we recommend a number of other strategies be implemented including: reducing the appeal of all tobacco products, forbidding new tobacco products or brand variants being marketed without evidence of reduced harm, appeal or addictiveness, and developing a tobacco industry resourced, but industry independent, Framework Convention on Tobacco Control global repository to assist national regulators in understanding and regulating the products on their markets.

  14. Production of uranium dioxide

    International Nuclear Information System (INIS)

    Hart, J.E.; Shuck, D.L.; Lyon, W.L.

    1977-01-01

    A continuous, four stage fluidized bed process for converting uranium hexafluoride (UF 6 ) to ceramic-grade uranium dioxide (UO 2 ) powder suitable for use in the manufacture of fuel pellets for nuclear reactors is disclosed. The process comprises the steps of first reacting UF 6 with steam in a first fluidized bed, preferably at about 550 0 C, to form solid intermediate reaction products UO 2 F 2 , U 3 O 8 and an off-gas including hydrogen fluoride (HF). The solid intermediate reaction products are conveyed to a second fluidized bed reactor at which the mol fraction of HF is controlled at low levels in order to prevent the formation of uranium tetrafluoride (UF 4 ). The first intermediate reaction products are reacted in the second fluidized bed with steam and hydrogen at a temperature of about 630 0 C. The second intermediate reaction product including uranium dioxide (UO 2 ) is conveyed to a third fluidized bed reactor and reacted with additional steam and hydrogen at a temperature of about 650 0 C producing a reaction product consisting essentially of uranium dioxide having an oxygen-uranium ratio of about 2 and a low residual fluoride content. This product is then conveyed to a fourth fluidized bed wherein a mixture of air and preheated nitrogen is introduced in order to further reduce the fluoride content of the UO 2 and increase the oxygen-uranium ratio to about 2.25

  15. Product Quality and Worker Quality

    OpenAIRE

    Abowd, John M; Kramarz, Francis

    1995-01-01

    We study the relation between product quality and worker quality using an economic model that, under certain conditions, provides a direct link between product price, product quality and work-force quality. Our measures of product quality are the evolution in the detailed product price relative to its product group, and the level of the product price relative to this group. Our worker quality measures are the firm's average person effect and personal characteristics effect from individual wag...

  16. Product Quality and Worker Quality

    OpenAIRE

    John M. ABOWD; Françis KRAMARZ; Antoine MOREAU

    1996-01-01

    We study the relation between product quality and worker quality using an economic model that, under certain conditions, provides a direct link between product price, product quality and work force quality. Our measures of product quality are the evolution in the detailed product price relative to its product group and the level of the product price relative to this group. Our worker quality measures are the firm's average person effect and personal characteristics effect from individual wage...

  17. Perspectives in production of functional meat products

    Science.gov (United States)

    Vasilev, D.; Glišić, M.; Janković, V.; Dimitrijević, M.; Karabasil, N.; Suvajdžić, B.; Teodorović, V.

    2017-09-01

    The meat industry has met new challenges since the World Health Organization classified processed meat in carcinogenic Group 1. In relation to this, the functional food concept in meat processing has gained importance, especially in reducing carcinogenic N-nitroso compounds and polycyclic aromatic hydrocarbons (PAHs) as an additional imperative, apart from the usual fat and salt reduction and product enrichment with functional ingredients. PAH reduction relies on control of the smoking process, but there is also a possibility they could be degraded by means of probiotic microorganisms or spices. The reduction of N-nitroso compounds could be provided by lowering the amount of added nitrite/nitrate, using substitutes for these chemicals, and/or by preventing conditions for the creation of N-nitroso compounds. Nevertheless, fat and salt reductions still remain topical, and rely mostly on the use of functional ingredients as their substitutes.

  18. Biodiesel production technologies: review

    Directory of Open Access Journals (Sweden)

    Shemelis Nigatu Gebremariam

    2017-05-01

    Full Text Available Biodiesel is a fuel with various benefits over the conventional diesel fuel. It is derived from renewable resources, it has less emission to environment, it is biodegradable so has very limited toxicity and above all its production can be decentralized so that it could have a potential in helping rural economies. However, there are also some worth mentioning challenges associated with production of biodiesel. Among them repeatedly mentioned are the cost of feedstock and the choice of convenient technology for efficient production of the fuel from diverse feedstock types. There are four main routes by which raw vegetable oil and/or animal fat can be made suitable for use as substituent fuel in diesel engines without modification. These are direct use or blending of oils, micro-emulsion, thermal cracking or pyrolysis and transesterification reaction. Due to the quality of the fuel produced, the transesterification method is the most preferred way to produce biodiesel from diverse feedstock types. Through this method, oils and fats (triglycerides are converted to their alkyl esters with reduced viscosity to near diesel fuel levels. There are different techniques to carry out transesterification reaction for biodiesel production. Each technique has its own advantages and disadvantages as well as its own specifically convenient feedstock character. There are also some very important reaction conditions to be given due attention in each of this techniques for efficient production of biodiesel, such as molar ratio of alcohol to oil, type and amount of catalyst, reaction temperature, reaction time, reaction medium, type and relative amount of solvents, among others. This review is meant to investigate the main transesterification techniques for biodiesel production in terms of their choice of feedstock character as well as their determinately required reaction conditions for efficient biodiesel production, so that to give an overview on their advantages

  19. Product Knowledge Modelling and Management

    DEFF Research Database (Denmark)

    Zhang, Y.; MacCallum, K. J.; Duffy, Alex

    1996-01-01

    function-oriented design. Both Specific Product Knowledge and Product Domain Knowledge are modelled at two levels, a meta-model and an information-level.Following that, a computer-based scheme to manage the proposed product lknowledge models within a dynamically changing environment is presented.......The term, Product Knowledge is used to refer to two related but distinct concepts; the knowledge of a specific product (Specific Product Knowledge) and the knowledge of a product domain (Product Domain Knowledge). Modelling and managing Product Knowlege is an essential part of carrying out design.......A scheme is presented in this paper to model, i.e. classify, structure and formalise the product knowledge for the purpose of supporting function-oriented design. The product design specification and four types of required attributes of a specific product have been identified to form the Specific Product...

  20. Smoke production in fires

    Energy Technology Data Exchange (ETDEWEB)

    Sarvaranta, L.; Kokkala, M. [VTT Building Technology, Espoo (Finland). Building Physics, Building Services and Fire Technology

    1995-12-31

    Characterization of smoke, factors influencing smoke production and experimental methods for measuring smoke production are discussed in this literature review. Recent test-based correlation models are also discussed. Despite the large number of laboratories using different fire testing methods, published smoke data have been scarce. Most technical literature on smoke production from building materials is about experimental results in small scale tests. Compilations from cone calorimeter tests have been published for a few materials, e.g. upholstered furniture materials and some building products. Mass optical density data and compilations of gravimetric soot data are available for various materials as well as a number of smoke obscuration values. For a given material often a wide range of values of smoke output can be found in the literature and care should be exercised in applying the appropriate value in each case. In laboratory experiments, the production of smoke and its optical properties are often measured simultaneously with other fire properties as heat release and flame spread. The measurements are usually dynamic in full scale, i.e. they are performed in a flow-through system. In small scale they may be either dynamic, as in the cone calorimeter, or static, i.e. the smoke is accumulated in a closed box. Small-scale tests are necessary as practical tools. Full-scale tests are generally considered to be more reliable and are needed to validitate the small-scale tests

  1. New Product Launching Ideas

    Science.gov (United States)

    Kiruthika, E.

    2012-09-01

    Launching a new product can be a tense time for a small or large business. There are those moments when you wonder if all of the work done to develop the product will pay off in revenue, but there are many things are can do to help increase the likelihood of a successful product launch. An open-minded consumer-oriented approach is imperative in todayís diverse global marketplace so a firm can identify and serve its target market, minimize dissatisfaction, and stay ahead of competitors. Final consumers purchase for personal, family, or household use. Finally, the kind of information that the marketing team needs to provide customers in different buying situations. In high-involvement decisions, the marketer needs to provide a good deal of information about the positive consequences of buying. The sales force may need to stress the important attributes of the product, the advantages compared with the competition; and maybe even encourage ìtrialî or ìsamplingî of the product in the hope of securing the sale. The final stage is the post-purchase evaluation of the decision. It is common for customers to experience concerns after making a purchase decision. This arises from a concept that is known as ìcognitive dissonance

  2. Hydrogen production by radiation

    International Nuclear Information System (INIS)

    Jung, Jin Ho; Lee, M. J.; Jin, J. H.; Park, K. B.; Cho, Y. H.; Jeong, H. S.; Chung, H. H.; Jeong, Y. S.; Ahn, S. S.

    2001-04-01

    In this work, various kinds of catalysts including a nanosize TiO2 (nTiO 2 ) were examined in respect to the efficiency of H2 production by gamma rays.The different activity of catalysts was characterized by X-ray powder diffraction (XRD) and electron paramagnetic resonance (EPR). A combination of EPR and spin-trapping method was also used to detect unstable radicals such as hydroxyl radicals and hydrogen atoms to investigate the effect of catalysts and additives on the efficiency of H2 production. A nanosize TiO 2 (nTiO 2 ) catalyst that showed an excellent activity in the production of H2 from water by gamma rays were examined in respect to the efficiency of H2 production with concomitant treatment of metal-EDTA complexes that are main wastes of chemical cleaning wastewater. As a result, among the catalysts examined in this work, a nanosize TiO2 (nTiO 2 ) showed the most efficient H2 production and the efficiency increased upon reapplication. This catalyst was also successfully used to produce H2 with concomitant treatment of metal-EDTA complexes

  3. Uranium production in Sweden

    International Nuclear Information System (INIS)

    Bergh, S.

    1994-01-01

    The history of uranium production in Sweden is reviewed in the article. The World War II led to an exploitation of the Swedish alum shale on a large scale. In the last phase of the war it also became obvious that the shale might be used for energy production of quite another kind than oil. In 1947 AB Atom energy was founded, an enterprise with one of its purposes to extract uranium for peaceful use. A plant with a yearly capacity of 120 tons of uranium was erected at Ranstad and ready for production by 1965. From the start in Ranstad and for many years to come there was hardly any interest in an immediate large uranium production. It was decided to use the plant for studies on its more effective exploitation in case of an expansion in the future, bearing in mind the reactor programme. In the course of time economical reasons began to speak against the project. The shale seemed to have a future neither as oil nor as uranium resource. The complete termination of the work on uranium production from shale occurred in 1989

  4. Gestion de production

    CERN Document Server

    Courtois, Alain; Pillet, Maurice

    1995-01-01

    n ouvrage de référence pour tous les gestionnaires de production industrielle. Un cas concret d'entreprise fictive, fil rouge de l'ouvrage, pour expliquer et illustrer les différents outils et méthodes utilisés. Toutes les méthodes et tous les outils de gestion de production, des plus traditionnels aux novateurs, explicités, comparés et illustrés. L'ouvrage, entièrement mis à jour, reflète toutes les évolutions liées à la gestion de production. II se divise désormais en deux grandes partes ; la première regroupe les méthodes de base de la gestion de la production ainsi que l'informatisation de celles-ci (chapitres 2 à 10) ; la seconde concerne les méthodes d'amélioration de la production (chapitres 11 à 15), en mettant un accent fort sur la philosophie du Lean Manufacturing : L'entreprise en mouvement avec le Lean ; Les principaux outils du Lean ; Le pilotage d'atelier en flux tirés par la méthode Kanban ; L'implantation d'ateliers ; Les indicateurs de performance. Pour faciliter la le...

  5. Optimizing kaon production

    International Nuclear Information System (INIS)

    Berley, D.

    1976-01-01

    Kaon production data is examined with the view toward producing high quality beams in the future. Emphasis is placed upon the low momentum region, below 1 GeV/c, where the behavior of the kaon momentum spectrum is shown to be dominated by strongly momentum dependent kinematic factors. No complete experimental survey of production cross sections at different incident proton energies exists from a single apparatus. Information on relative production yields for different proton energies is important in the choice of parameters for an accelerator constructed primarily as a source of kaons. Data from different accelerators do exist and have been compiled. The key element in understanding how to present the data from different laboratories in a consistent way is an analysis of the effects of target material, target size, and production angle. This analysis not only enables a unification of the data but also indicates simple, useful and powerful principles about optimizing target efficiency. A summary is presented of existing kaon production facilities in the United States. These are all at proton accelerators. The possibility of using electron accelerators as kaon sources is examined. It is found that secondary beam fluxes can be obtained at electron linacs which are comparable to those obtained at proton synchrotrons

  6. Smoke production in fires

    Energy Technology Data Exchange (ETDEWEB)

    Sarvaranta, L; Kokkala, M [VTT Building Technology, Espoo (Finland). Building Physics, Building Services and Fire Technology

    1996-12-31

    Characterization of smoke, factors influencing smoke production and experimental methods for measuring smoke production are discussed in this literature review. Recent test-based correlation models are also discussed. Despite the large number of laboratories using different fire testing methods, published smoke data have been scarce. Most technical literature on smoke production from building materials is about experimental results in small scale tests. Compilations from cone calorimeter tests have been published for a few materials, e.g. upholstered furniture materials and some building products. Mass optical density data and compilations of gravimetric soot data are available for various materials as well as a number of smoke obscuration values. For a given material often a wide range of values of smoke output can be found in the literature and care should be exercised in applying the appropriate value in each case. In laboratory experiments, the production of smoke and its optical properties are often measured simultaneously with other fire properties as heat release and flame spread. The measurements are usually dynamic in full scale, i.e. they are performed in a flow-through system. In small scale they may be either dynamic, as in the cone calorimeter, or static, i.e. the smoke is accumulated in a closed box. Small-scale tests are necessary as practical tools. Full-scale tests are generally considered to be more reliable and are needed to validitate the small-scale tests

  7. Product mix retail strategies

    Directory of Open Access Journals (Sweden)

    Ristić Miloš

    2005-01-01

    Full Text Available The sales of appropriate merchandise is essential for performance of every retail enterprise. The way that products are displayed within retail sales object will be in so much important as the merchandise is considered a pad of the perceived image of that outlet. Thus, assorted products speak to their consumers as far as to what they [the consumers] can expect, and they signal off a number of marketing messages as well. Merchandising is the key element in attracting the consumers and in encouraging of repeated purchases. The question then could be: products or services?, yet the retailer's future will depend on his ability to develop the best sale offers. The selection of appropriate merchandise, and that would be the one [merchandise] that is in accordance with outlet's image, requires careful planning which, again, needs to be related with the direction the seller is following. Managing of the product assortments' dimensions emerges from the retailer's strategic planning, therefore, the decisions made on the inclusion of novel products as well as about deleting of the old stock are deemed (to be strategic.

  8. Oil production system

    Energy Technology Data Exchange (ETDEWEB)

    Ballantyne, J F

    1983-12-21

    A new oil producing system is proposed which consists of a group of underwater wells, an underwater riser and a floating storage facility for the production of the wells. The group of wells and the riser are interconnected through a manifold system in such a way that the production from any well or from the entire group of wells go to the base (foundation) of the riser. From above the riser is connected with the floating storage facility which is equipped, besides tanks for storing the well products, with a separation device for separating the oil and the accompanying gas. The gas is used as a fuel for producing electric power required by the dynamic positioning systems. The products from each well are tested by means of a regulable coupling controlled by means of a cable, which is passed from the surface through the riser. The wellhead equipment for the unslanted wells is mounted on a template previously installed on the sea floor. From the template the well products enter the riser through the manifold unit system.

  9. Beauty production at CDF

    International Nuclear Information System (INIS)

    Shears, Tara

    2008-01-01

    A review of recent measurements of beauty production, based on proton antiproton collision data at √s = 1.96 TeV and using the CDF detector, is given. Previous measurements of beauty (b) quark production at the Tevatron, carried out at centre-of-mass energies √s = 1.8 TeV, have shown discrepancies when compared to Next to Leading Order (NLO) predictions [1]. Improved predictions and experimental procedures have reduced this discrepancy [2]. Improved parton density functions, better fragmentation functions and more complete theoretical calculations have improved theoretical accuracy. Experimentally, measurements of beauty production at √s = 1.96 TeV are now presented in terms of b hadrons or B mesons, to avoid problems unfolding back to the quark level. In this review [3] measurements of inclusive beauty (where one beauty jet or hadron is reconstructed in the event), and beauty + X (where X can be a boson or another beauty jet or hadron), production will be presented: inclusive beauty jet cross-section; semi and fully reconstructed B meson cross-section; beauty dijet cross-section; semi-reconstructed B B meson cross-section; Z boson + beauty jet cross-section. More information concerning other measurements of heavy quark production can be found elsewhere [4

  10. Application of manufactured products

    Science.gov (United States)

    Sastri, Sankar; Duke, Michael B.

    1992-01-01

    A wide range of products can be manufactured from the following materials: (1) lunar regolith or basalt; (2) regolith or rock beneficiated to concentrate plagioclase or other minerals; (3) iron, extracted from lunar soil or rocks by various means; (4) naturally occurring or easily obtained materials that have cementitious properties; and (5) byproducts of the above materials. Among the products that can be produced from these materials are the following: beams; plates and sheets; transparent plates (windows); bricks and blocks; pipes and tubes; low-density materials (foams); fiber, wire, and cables; foils and reflective coatings; hermetic seals (coatings); and formed objects. In addition to oxygen, which can be obtained by several processes, either from unbeneficiated regolith or by reduction of concentrated ilmenite, these materials make the simplest requirements of the lunar resource extraction system. A thorough analysis of the impact of these simplest products on the economics of space operations is not possible at this point. Research is necessary both to define optimum techniques and adapt them to space and to determine the probable market for the products so that the priority of various processes can be assessed. Discussions of the following products are presented: aerobraking heat shields; pressurized habitats; lunar photovoltaic farms; and agricultural systems.

  11. ATLAS production system

    CERN Document Server

    Borodin, Mikhail; The ATLAS collaboration; De, Kaushik; Klimentov, Alexei; Golubkov, Dmitry; Maeno, Tadashi; Mashinistov, Ruslan; Wenaus, Torre; Padolski, Siarhei

    2016-01-01

    The second generation of the ATLAS production system called ProdSys2 is a distributed workload manager which used by thousands of physicists to analyze the data remotely, with the volume of processed data is beyond the exabyte scale, across a more than hundred heterogeneous sites. It achieves high utilization by combining dynamic job definition based on many criterias, such as input and output size, memory requirements and CPU consumption with manageable scheduling policies and by supporting different kind of computational resources, such as GRID, clouds, supercomputers and volunteering computers. Besides jobs definition Production System also includes flexible web user interface, which implements user-friendly environment for main ATLAS workflows, e.g. simple way of combining different data flows, and real-time monitoring, optimised for using with huge amount of information to present. We present an overview of the ATLAS Production System major components: job and task definition, workflow manager web user i...

  12. Renewable Acrylonitrile Production

    Energy Technology Data Exchange (ETDEWEB)

    Beckham, Gregg T [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Karp, Eric M [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Eaton, Todd R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Sanchez i Nogue, Violeta [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Vorotnikov, Vassili [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Biddy, Mary J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Tan, Eric C [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Brandner, David [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Manker, Lorenz [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Michener, William E [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Vardon, Derek R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Bratis, Adam D [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Liu, Rongming [University of Colorado; Gill, Ryan T. [University of Colorado; Gilhespy, Michelle [Johnson Matthey Technology Centre; Skoufa, Zinovia [Johnson Matthey Technology Centre; Watson, Michael J. [Johnson Matthey Technology Centre; Fruchey, O. Stanley [MATRIC; Cywar, Robin M. [Formerly NREL

    2017-12-08

    Acrylonitrile (ACN) is a petroleum-derived compound used in resins, polymers, acrylics, and carbon fiber. We present a process for renewable ACN production using 3-hydroxypropionic acid (3-HP), which can be produced microbially from sugars. The process achieves ACN molar yields exceeding 90% from ethyl 3-hydroxypropanoate (ethyl 3-HP) via dehydration and nitrilation with ammonia over an inexpensive titanium dioxide solid acid catalyst. We further describe an integrated process modeled at scale that is based on this chemistry and achieves near-quantitative ACN yields (98 +/- 2%) from ethyl acrylate. This endothermic approach eliminates runaway reaction hazards and achieves higher yields than the standard propylene ammoxidation process. Avoidance of hydrogen cyanide as a by-product also improves process safety and mitigates product handling requirements.

  13. STALING OF BAKERY PRODUCTS

    Directory of Open Access Journals (Sweden)

    Jolana Karovičová

    2011-04-01

    Full Text Available The aim of this work was to write down a review article about various aspects connected with staling of bakery products. Shelf life is directly associated with the staling process, which depends on the composition of bakery products and important are storage conditions as well. In the article are described particular components (starch, nonstarch polysacharides, water and how they affect the staling process. Generally during staling of bakery products occur  processes related with starch retrogradation, moisture redistribution from the crumb to the crust and other interactions between components. Staling process could be delayed by using various bakery improvers like enzymes, hydrocolloids, emulgators and other compounds. Also useful is the application of suitable packaging techniques.doi:10.5219/124

  14. Product and Process Modelling

    DEFF Research Database (Denmark)

    Cameron, Ian T.; Gani, Rafiqul

    . These approaches are put into the context of life cycle modelling, where multiscale and multiform modelling is increasingly prevalent in the 21st century. The book commences with a discussion of modern product and process modelling theory and practice followed by a series of case studies drawn from a variety......This book covers the area of product and process modelling via a case study approach. It addresses a wide range of modelling applications with emphasis on modelling methodology and the subsequent in-depth analysis of mathematical models to gain insight via structural aspects of the models...... to biotechnology applications, food, polymer and human health application areas. The book highlights to important nature of modern product and process modelling in the decision making processes across the life cycle. As such it provides an important resource for students, researchers and industrial practitioners....

  15. Connecting the Production Multiple

    DEFF Research Database (Denmark)

    Lichen, Alex Yu; Mouritsen, Jan

    &OP process itself is a fluid object, but there is still possibility to organise the messy Production. There are connections between the Production multiple and the managerial technology fluid. The fluid enacted the multiplicity of Production thus making it more difficult to be organised because there were...... in opposite directions. They are all part of the fluid object. There is no single chain of circulating references that makes the object a matter of fact. Accounting fluidity means that references drift back and forth and enact new realities also connected to the chain. In this setting future research may......This paper is about objects. It follows post ANT trajectories and finds that objects are multiple and fluid. Extant classic ANT inspired accounting research largely sees accounting inscriptions as immutable mobiles. Although multiplicity of objects upon which accounting acts has been explored...

  16. Cyanobacterial chemical production.

    Science.gov (United States)

    Case, Anna E; Atsumi, Shota

    2016-08-10

    The increase in global temperatures caused by rising CO2 levels necessitates the development of alternative sources of fuel and chemicals. One appealing alternative that has been receiving increased attention in recent years is the photosynthetic conversion of atmospheric CO2 to biofuels and chemical products using genetically engineered cyanobacteria. This can help to not only provide an alternate "greener" source for some of the most popular petroleum based products but it can also help to reduce atmospheric CO2. Utilizing cyanobacteria rather than plants allows for reduced land requirements and reduces competition with food crops. This review discusses advancements in the field since 2012 with a particular emphasis on production of hydrocarbons. Copyright © 2016 Elsevier B.V. All rights reserved.

  17. Productivity and Institutions

    Directory of Open Access Journals (Sweden)

    Gylfi Zoega

    2015-12-01

    Full Text Available Differences in productivity account for differences in output per capita between countries as well as changes in output and the standard of living for each country over long periods of time. During the first industrial revolution, one could already see the emergence of two groups of countries: the high- and the low-GDP per capita countries. The list of countries belonging to the highproductivity group has not changed much over the past century. Differences in institutions separate the two clubs. The high-productivity group is, amongst many other differences, characterized by less corruption, a better legal system, superior enforcement of contracts, a lower cost of starting a business and lower tariffs. Historical output series for Britain going back to the mid-19th century show that productivity has increased greatly and improved the standard of living.

  18. Remelt Ingot Production Technology

    Science.gov (United States)

    Grandfield, J. F.

    The technology related to the production of remelt ingots (small ingots, sows and T-Bar) is reviewed. Open mold conveyors, sow casting, wheel and belt casting and VDC and HDC casting are described and compared. Process economics, capacity, product quality and process problems are listed. Trends in casting machine technology such as longer open mold conveyor lines are highlighted. Safety issues related to the operation of these processes are discussed. The advantages and disadvantages of the various machine configurations and options e.g. such as dry filling with the mold out of water and wet filling with the mold in water for open mould conveyors are discussed. The effect of mold design on machine productivity, mold cracking and mold life is also examined.

  19. Energy production systems engineering

    CERN Document Server

    Blair, Thomas Howard

    2017-01-01

    Energy Production Systems Engineering presents IEEE, Electrical Apparatus Service Association (EASA), and International Electrotechnical Commission (IEC) standards of engineering systems and equipment in utility electric generation stations. Electrical engineers that practice in the energy industry must understand the specific characteristics of electrical and mechanical equipment commonly applied to energy production and conversion processes, including the mechanical and chemical processes involved, in order to design, operate and maintain electrical systems that support and enable these processes. To aid this understanding, Energy Production Systems Engineeringdescribes the equipment and systems found in various types of utility electric generation stations. This information is accompanied by examples and practice problems. It also addresses common issues of electrical safety that arise in electric generation stations.

  20. Productivity Change and Externalities

    DEFF Research Database (Denmark)

    Kravtsova, Victoria

    2014-01-01

    This paper contributes to the analysis of the impact of externalities on the host country's total factor productivity by taking into account different dimensions of spillover effects. Namely, engagement in exporting and foreign ownership is generally perceived as being beneficial to individual...... firms and the economy as a whole. The approach used in the current research accounts for different internal as well as external factors that individual firms face and evaluates the effect on changes in productivity, technology as well as the efficiency of domestic firms. The empirical analysis focuses...... on Hungary. While the country leads the group of post-socialist countries in the amount of attracted foreign direct investments (FDI) the effect of this policy on the economy remains unclear. The research finds that different externalities play a different role in productivity, technological and efficiency...

  1. Antiplasmodial Natural Products

    Directory of Open Access Journals (Sweden)

    Cláudio R. Nogueira

    2011-03-01

    Full Text Available Malaria is a human infectious disease that is caused by four species of Plasmodium. It is responsible for more than 1 million deaths per year. Natural products contain a great variety of chemical structures and have been screened for antiplasmodial activity as potential sources of new antimalarial drugs. This review highlights studies on natural products with antimalarial and antiplasmodial activity reported in the literature from January 2009 to November 2010. A total of 360 antiplasmodial natural products comprised of terpenes, including iridoids, sesquiterpenes, diterpenes, terpenoid benzoquinones, steroids, quassinoids, limonoids, curcubitacins, and lanostanes; flavonoids; alkaloids; peptides; phenylalkanoids; xanthones; naphthopyrones; polyketides, including halenaquinones, peroxides, polyacetylenes, and resorcylic acids; depsidones; benzophenones; macrolides; and miscellaneous compounds, including halogenated compounds and chromenes are listed in this review.

  2. Additives in yoghurt production

    Directory of Open Access Journals (Sweden)

    Milna Tudor

    2008-02-01

    Full Text Available In yoghurt production, mainly because of sensory characteristics, different types of additives are used. Each group, and also each substance from the same group has different characteristics and properties. For that reason, for improvement of yoghurt sensory characteristics apart from addition selection, the quantity of the additive is very important. The same substance added in optimal amount improves yoghurt sensory attributes, but too small or too big addition can reduce yoghurt sensory attributes. In this paper, characteristics and properties of mostly used additives in yoghurt production are described; skimmed milk powder, whey powder, concentrated whey powder, sugars and artificial sweeteners, fruits, stabilizers, casein powder, inulin and vitamins. Also the impact of each additive on sensory and physical properties of yoghurt, syneresis and viscosity, are described, depending on used amount added in yoghurt production.

  3. Sustainable Biocatalytic Biodiesel Production

    DEFF Research Database (Denmark)

    Güzel, Günduz

    As part of his PhD studies, Gündüz Güzel examined the thermodynamics of reactions involved in biocatalytic biodiesel production processes, with a specific focus on phase equilibria of reactive systems. He carried out the thermodynamic analyses of biocatalytic processes in terms of phase and chemi......As part of his PhD studies, Gündüz Güzel examined the thermodynamics of reactions involved in biocatalytic biodiesel production processes, with a specific focus on phase equilibria of reactive systems. He carried out the thermodynamic analyses of biocatalytic processes in terms of phase...... and chemical equilibria as part of his main sustainable biodiesel project. The transesterification reaction of vegetable oils or fats with an aliphatic alcohol – in most cases methanol or ethanol – yields biodiesel (long-chain fatty acid alkyl esters – FAAE) as the main product in the presence of alkaline...

  4. Real time production optimization

    Energy Technology Data Exchange (ETDEWEB)

    Saputelli, Luigi; Otavio, Joao; Araujo, Turiassu; Escorcia, Alvaro [Halliburton, Houston, TX (United States). Landmark Division

    2004-07-01

    Production optimization encompasses various activities of measuring, analyzing, modeling, prioritizing and implementing actions to enhance productivity of a field. We present a state-of-the-art framework for optimizing production on a continuous basis as new sensor data is acquired in real time. Permanently acquired data is modeled and analyzed in order to create predictive models. A model based control strategy is used to regulate well and field instrumentation. The optimum field operating point, which changes with time, satisfies the maximum economic return. This work is a starting point for further development in automatic, intelligent reservoir technologies which get the most out of the abilities of permanent, instrumented wells and remotely activated downhole completions. The strategy, tested with history-matched data from a compartmentalised giant field, proved to reduce operating costs while increasing oil recovery by 27% in this field. (author)

  5. Radiopharmacy and radiopharmaceutical products

    International Nuclear Information System (INIS)

    Galy, Gerard; Fraysse, Marc; Hammadi, Akli; Tafani, Mathieu

    2012-01-01

    Written by two radio-pharmacist doctors, this book presents all the theoretical and practical knowledge necessary to radio-pharmacists in charge of the management, the preparation, the control and the delivery of radiopharmaceutical medicines. It presents the scientific, regulatory and technical foundations for the implementation and operation of radiopharmacy in hospitals, addressing themes such as the fundamentals and theories about nuclear physics and radioactivity (production of artificial radionuclides, detectors and measuring instruments, radio-chemistry), radio-biology and radiation protection (biological effects of ionizing radiations, radioprotection, regulations concerning the use of radiopharmaceutical products by medical personnel), the application domains of radiopharmaceutical medicines and products (diagnosis, therapy, biological assessment), and the management of radiopharmacy in a hospital (design, implementation, organizing, operation)

  6. Improving pension product design

    DEFF Research Database (Denmark)

    Konicz, Agnieszka Karolina; Mulvey, John M.

    2013-01-01

    The paper develops a pension product that can be oered in a dened contribution pension scheme as a deferred or immediate life annuity. The product is characterized by linking an individual's savings directly to market returns and differs from the products available in the market by being adjusted...... to individual needs. We argue that the asset allocation, the payout prole and the insured sum should not only depend on the plan member's age (or time left to retirement), nor only on her risk preferences, but should capture personal and economical characteristics. Among other factors, we include current wealth...... are optimal under the expected utility function of retirement benets given the individual's characteristics. The problem is solved via a model that combines two optimization approaches: stochastic optimal control and multistage stochastic programming. The rst method is common in nancial and actuarial...

  7. Intake to Production Ratio

    DEFF Research Database (Denmark)

    Nazaroff, William; Weschler, Charles J.; Little, John C.

    2012-01-01

    BACKGROUND: Limited data are available to assess human exposure to thousands of chemicals currently in commerce. Information that relates human intake of a chemical to its production and use can help inform understanding of mechanisms and pathways that control exposure and support efforts...... to protect public health.OBJECTIVES: We introduce the intake-to-production ratio (IPR) as an economy-wide quantitative indicator of the extent to which chemical production results in human exposure.METHODS: The IPR was evaluated as the ratio of two terms: aggregate rate of chemical uptake in a human......(n-butyl) phthalate, 1,040 ppm for para-dichlorobenzene, 6,800 ppm for di(isobutyl) phthalate, 7,700 ppm for diethyl phthalate, and 8,000-24,000 ppm (range) for triclosan.CONCLUSION: The IPR is well suited as an aggregate metric of exposure intensity for characterizing population-level exposure to synthesized...

  8. Production of endogenous pyrogen.

    Science.gov (United States)

    Dinarello, C A

    1979-01-01

    The production and release of endogenous pyrogen by the host is the first step in the pathogenesis of fever. Endogenous pyrogen is a low-molecular-weight protein released from phagocytic leukocytes in response to several substances of diverse nature. Some of these agents stimulate production of endogenous pyrogen because they are toxic; others act as antigens and interact with either antibody or sensitized lymphocytes in order to induce its production. Some tumors of macrophage origin produce the molecule spontaneously. Whatever the mechanism involved, endogenous pyrogen is synthesized following transcription of new DNA and translation of mRNA into new protein. Once synthesis is completed, the molecule is released without significant intracellular storage. Recent evidence suggests that following release, molecular aggregates form which are biologically active. In its monomer form, endogenous pyrogen is a potent fever-producing substance and mediates fever by its action on the thermoregulatory center.

  9. Product-Marketing Innovation, Skills, and Firm Productivity Growth

    DEFF Research Database (Denmark)

    Junge, Martin; Severgnini, Battista; Sørensen, Anders

    2016-01-01

    The role of product and marketing innovation for productivity growth is addressed using survey and register data for the Danish economy. It is hypothesized that product and marketing innovation are complementary inputs and that innovation activities are skill-intensive. It is established...... that product and marketing innovation in skill-intensive firms results in significantly faster productivity growth. Moreover, product and marketing innovation have independent roles in productivity growth, which cannot be attributed to organizational changes. Finally, we apply an instrument variable approach...... for firms, innovation choices to study endogeneity. The results strongly support the idea that product–marketing innovation leads to faster productivity growth in skill-intensive firms....

  10. Transdisciplinary product development

    Directory of Open Access Journals (Sweden)

    Tomaž Savšek

    2015-12-01

    Full Text Available Research Question (RQ: How can transdisciplinary approach increase the product development process in future industry? Purpose: The aim of the research is to develop a model of an effective product development in the automotive industry based on the transdisciplinary approach. Method: We used a qualitative research approach in order to develop a theoretical framework of transdisciplinarity. The framework comprises the concurrent engineering and experts from different disciplines. The framework was represented by a mathematical model which based on stochastic dynamic programming. Results: We developed a theoretical frameworkand a practical case of transdisciplinary product development in the automotive industry. We presented a mathematical model and information environment which supports such a model. Organization: The findings of the research will provide higher productivity, lower operating costs, change in personnel structure, higher added value, lower sales costs, lower administration costs, reduction in growth of expenses, and lower costs of work equipment. Society: The research impact on higher customer’s satisfaction, increased flexibility of operations, better quality of information, improved control of sources, less waste materials and less pollution, improved planning process, more favourable consideration of employees , improved portfolio management, and better corporate presentation of company. Originality: Transdisciplinary framework combines methods of concurrent engineering and interdisciplinary approach in a process of product development. The development of such a framework is a complete novelty and represents an original approach to product development, which will be particularly suitable for the smart factories of the future. Transdisciplinary framework was transformed in to a mathematical model based on stochastic dynamic programming. Model is supported by the existing information warehouse and represents a potential for

  11. Trade and Sectoral Productivity

    OpenAIRE

    Fadinger, Harald; Fleiss, Pablo

    2008-01-01

    Even though differences in sectoral total factor productivity are at the heart of Ricardian trade theory and many models of growth and development, very little is known about their size and their form. In this paper we try to fill this gap by using a Hybrid-Ricardo-Heckscher-Ohlin trade model and bilateral sectoral trade data to overcome the data problem that has limited previous studies, which have used input and output data to back out productivities, to a small number of OECD economies. We...

  12. Biotechnological production of vanillin.

    Science.gov (United States)

    Priefert, H; Rabenhorst, J; Steinbüchel, A

    2001-08-01

    Vanillin is one of the most important aromatic flavor compounds used in foods, beverages, perfumes, and pharmaceuticals and is produced on a scale of more than 10 thousand tons per year by the industry through chemical synthesis. Alternative biotechnology-based approaches for the production are based on bioconversion of lignin, phenolic stilbenes, isoeugenol, eugenol, ferulic acid, or aromatic amino acids, and on de novo biosynthesis, applying fungi, bacteria, plant cells, or genetically engineered microorganisms. Here, the different biosynthesis routes involved in biotechnological vanillin production are discussed.

  13. Innovativeness in production systems

    DEFF Research Database (Denmark)

    Blichfeldt, Henrik; Knudsen, Mette Præst

    Alignment of market demand and manufacturing capabilities are directly linked to the potential competitive advantage. Pressure for manufacturing companies to customize increase the need for productions systems to handle innovations, especially in SMEs. The paper claims that innovativeness has...... a positive influence of the ability of the manufacturing system to provide specific capabilities that enables the entire production system to positively influence the competitiveness. A comparative case study of three SMEs shows that competitive advantages are obtained through innovative technologies......, but revealed also automation potential in data and information management to be more responsive and cost-effective....

  14. Hadron coherent production

    International Nuclear Information System (INIS)

    Dremin, I.M.

    1981-01-01

    The process of the coherent production of hadrons analogous to Cherenkov radiation of photons is considered. Its appearence and qualitative treatment are possible now because it is known from experiment that the real part of the πp (and pp) forward elastic scattering amplitude is positive at high energies. The threshold behaviour of the process as well as very typical angular and psub(T)-distributions where psub(t)-transverse momentum corresponding to the ring structure of the target diagram at rather large angles and to high-psub(T) jet production are emphasized [ru

  15. Predicting safe sandwich production

    DEFF Research Database (Denmark)

    Birk, Tina; Duan, Zhi; Møller, Cleide Oliveira de Almeida

    2014-01-01

    Time and temperature control is crucial to avoid growth of pathogens during production and serving of cold ready-to-eat meals. The Danish guidelines state that chilled foods, such as sandwiches, should not be outside the cold chain for more than 3 hours including the time for preparation...... and serving. However, Danish sandwich producing companies find it challenging to comply with this and have expressed a need for more flexibility. The Danish guidelines do allow for a prolongation of the acceptable time outside the cold chain, if the safety of the specific production can be documented...

  16. Defect production in ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Zinkle, S.J. [Oak Ridge National Lab., TN (United States); Kinoshita, C. [Kyushu Univ. (Japan)

    1997-08-01

    A review is given of several important defect production and accumulation parameters for irradiated ceramics. Materials covered in this review include alumina, magnesia, spinel silicon carbide, silicon nitride, aluminum nitride and diamond. Whereas threshold displacement energies for many ceramics are known within a reasonable level of uncertainty (with notable exceptions being AIN and Si{sub 3}N{sub 4}), relatively little information exists on the equally important parameters of surviving defect fraction (defect production efficiency) and point defect migration energies for most ceramics. Very little fundamental displacement damage information is available for nitride ceramics. The role of subthreshold irradiation on defect migration and microstructural evolution is also briefly discussed.

  17. Product Licenses Database Application

    CERN Document Server

    Tonkovikj, Petar

    2016-01-01

    The goal of this project is to organize and centralize the data about software tools available to CERN employees, as well as provide a system that would simplify the license management process by providing information about the available licenses and their expiry dates. The project development process is consisted of two steps: modeling the products (software tools), product licenses, legal agreements and other data related to these entities in a relational database and developing the front-end user interface so that the user can interact with the database. The result is an ASP.NET MVC web application with interactive views for displaying and managing the data in the underlying database.

  18. Fission product detection

    International Nuclear Information System (INIS)

    Liatard, E.; Akrouf, S.; Bruandet, J.F

    1987-01-01

    The response of photovoltaic cells to heavy ions and fission products have been tested on beam. Their main advantages are their extremely low price, their low sensitivity to energetic light ions with respect to fission products, and the possibility to cut and fit them together to any shape without dead zone. The time output signals of a charge sensitive preamplifier connected to these cells allows fast coincidences. A resolution of 12ns (F.W.H.M.) have been measured between two cells [fr

  19. Duration in Production Contracts

    OpenAIRE

    MacDonald, James M.; Korb, Penelope J.

    2006-01-01

    We use 2003 and 2004 ARMS data to analyze variations in contract duration among growers of broilers who hold production contracts. Most contracts cover just a single flock, but many extend for 1-2 years, and a significant minority of broiler contracts specify lengths of 5, 10, and even 15 years. We find that grower debt and production volume are inversely related to the choice of a short term (a year or less) contract, while lengthy prior experience with the contractor promotes short term con...

  20. Happiness and Productivity

    OpenAIRE

    Oswald, Andrew J.; Proto, Eugenio; Sgroi, Daniel

    2009-01-01

    Some firms say they care about the happiness and ‘well-being’ of their employees. But are such\\ud claims hype? Or might they be scientific good sense? This study provides evidence that happiness\\ud makes people more productive. First, we examine fundamental real-world shocks (bereavement and\\ud family illness) imposed by Nature. We show that lower happiness is associated with lower\\ud productivity. Second, within the laboratory, we design two randomized controlled trials. Some\\ud individuals ...

  1. Production Flexibility and Hedging

    Directory of Open Access Journals (Sweden)

    Georges Dionne

    2015-12-01

    Full Text Available We extend the analysis on hedging with price and output uncertainty by endogenizing the output decision. Specifically, we consider the joint determination of output and hedging in the case of flexibility in production. We show that the risk-averse firm always maintains a short position in the futures market when the futures price is actuarially fair. Moreover, in the context of an example, we show that the presence of production flexibility reduces the incentive to hedge for all risk averse agents.

  2. Software as quality product

    International Nuclear Information System (INIS)

    Enders, A.

    1975-01-01

    In many discussions on the reliability of computer systems, software is presented as the weak link in the chain. The contribution attempts to identify the reasons for this situation as seen from the software development. The concepts correctness and reliability of programmes are explained as they are understood in the specialist discussion of today. Measures and methods are discussed which are particularly relevant as far as the obtaining of fault-free and reliable programmes is concerned. Conclusions are drawn for the user of software so that he is in the position to judge himself what can be justly expected frm the product software compared to other products. (orig./LH) [de

  3. Charm production in SIBYLL

    CERN Document Server

    Riehn, Felix; Fedynitch, Anatoli; Gaisser, Thomas K.; Stanev, Todor

    2015-08-04

    SIBYLL 2.1 is an event generator for hadron interactions at the highest energies. It is commonly used to analyze and interpret extensive air shower measurements. In light of the first detection of PeV neutrinos by the IceCube collaboration the inclusive fluxes of muons and neutrinos in the atmosphere have become very important. Predicting these fluxes requires understanding of the hadronic production of charmed particles since these contribute significantly to the fluxes at high energy through their prompt decay. We will present an updated version of SIBYLL that has been tuned to describe LHC data and extended to include the production of charmed hadrons.

  4. FDG decomposition products

    International Nuclear Information System (INIS)

    Macasek, F.; Buriova, E.

    2004-01-01

    In this presentation authors present the results of analysis of decomposition products of [ 18 ]fluorodexyglucose. It is concluded that the coupling of liquid chromatography - mass spectrometry with electrospray ionisation is a suitable tool for quantitative analysis of FDG radiopharmaceutical, i.e. assay of basic components (FDG, glucose), impurities (Kryptofix) and decomposition products (gluconic and glucuronic acids etc.); 2-[ 18 F]fluoro-deoxyglucose (FDG) is sufficiently stable and resistant towards autoradiolysis; the content of radiochemical impurities (2-[ 18 F]fluoro-gluconic and 2-[ 18 F]fluoro-glucuronic acids in expired FDG did not exceed 1%

  5. Development of Production Systems

    DEFF Research Database (Denmark)

    Christiansen, Thomas Bøhm

    1997-01-01

    This paper presents the initial considerations related to a Ph.D. study initiated at IPV, DTU in February 1997, concerning the research subject "Development of Production Systems". The content and aim of this paper is to 1) to introduce the study by......This paper presents the initial considerations related to a Ph.D. study initiated at IPV, DTU in February 1997, concerning the research subject "Development of Production Systems". The content and aim of this paper is to 1) to introduce the study by...

  6. IPOs and Product Quality.

    OpenAIRE

    Stoughton, Neal M; Wong, Kit Pong; Zechner, Josef

    2001-01-01

    Given recent public attention paid to high-flying Internet IPOs such as Yahoo and Amazon.com, we explore a product market motive for going public. We develop a model where consumers discern product quality from the stock price. The model predicts that only better-quality firms will go public. Effects of IPO announcements on rival firms' stock prices are related to inferences about market size and market share. The model also predicts that the likelihood of "hot issue" markets depends on the d...

  7. Microbial products II

    Energy Technology Data Exchange (ETDEWEB)

    Pape, H; Rehm, H J [eds.

    1986-01-01

    The present volume deals mainly with compounds which have been detected as natural microbial products. Part 1 of this volume introduces the general aspects of the overproduction of metabolites and the concepts and genetics of secondary metabolism. Compounds such as nucleosides, nucleotides, coenzymes, vitamins and lipids are dealt with in part 2. Part 3 then is devoted to products and antibiotics with uses im medicine, veterinary medicine, plant protection and metabolites with antitumor activity. Several secondary metabolites have found uses in human and animal health care. With 244 figs., 109 tabs.

  8. Wavestar Energy Production Outlook

    DEFF Research Database (Denmark)

    Frigaard, Peter Bak; Andersen, Thomas Lykke; Kofoed, Jens Peter

    It is of paramount importance to decrease the Cost of Energy (CoE) from Wavestar wave energy con-verters (WECs) in order to make the WECs competitive to other sources of renewable energy. The CoE can be decreased by reducing the cost of the machines (CAPEX and OPEX) and by increasing the in......-come. The income can most obviously be enlarged by increasing the energy production. The focus of the present note is solely on expectations to the yearly energy production from future Wavestar WECs....

  9. Biological hydrogen production

    Energy Technology Data Exchange (ETDEWEB)

    Benemann, J.R. [Univ. of California, Berkeley, CA (United States)

    1995-11-01

    Biological hydrogen production can be accomplished by either thermochemical (gasification) conversion of woody biomass and agricultural residues or by microbiological processes that yield hydrogen gas from organic wastes or water. Biomass gasification is a well established technology; however, the synthesis gas produced, a mixture of CO and H{sub 2}, requires a shift reaction to convert the CO to H{sub 2}. Microbiological processes can carry out this reaction more efficiently than conventional catalysts, and may be more appropriate for the relatively small-scale of biomass gasification processes. Development of a microbial shift reaction may be a near-term practical application of microbial hydrogen production.

  10. Structure - materials - production

    DEFF Research Database (Denmark)

    Gammelgaard Nielsen, Anders; Gammel, Peder; Busch, Jens

    2002-01-01

    For the last six years th Aarhus School of Architecture has introduced the first year students (there are about 200 students admitted each year) to structure, materials, design and production through a five week course in collaboration with a group of local companies.......For the last six years th Aarhus School of Architecture has introduced the first year students (there are about 200 students admitted each year) to structure, materials, design and production through a five week course in collaboration with a group of local companies....

  11. Lean Production : Werkzeuge zur Realisierung

    OpenAIRE

    Binner, Hartmut F.

    2008-01-01

    INHALT: l. Einleitung und Standortbestimmung 2. Japanische Wertvorstellungen 3. Inhalte der Lean Production 4. Fertigungssegmentierung 5. Informationsmanagement mit CIM- und Logistik-Komponenten 6. Logistikgerechte Strukturen der Lean Production 7. Realisierung der Lean Production 8. Zusammenfassung

  12. Radiopharmaceutical production at Lucas Heights

    International Nuclear Information System (INIS)

    Druce, M.

    1987-01-01

    The difficult problems of operating and maintaining complex equipment, meeting despatch deadlines, ensuring product quality, production scheduling and controlling staff are discussed in relation to Australia's national radioisotope production plant

  13. Modelling of virtual production networks

    Directory of Open Access Journals (Sweden)

    2011-03-01

    Full Text Available Nowadays many companies, especially small and medium-sized enterprises (SMEs, specialize in a limited field of production. It requires forming virtual production networks of cooperating enterprises to manufacture better, faster and cheaper. Apart from that, some production orders cannot be realized, because there is not a company of sufficient production potential. In this case the virtual production networks of cooperating companies can realize these production orders. These networks have larger production capacity and many different resources. Therefore it can realize many more production orders together than each of them separately. Such organization allows for executing high quality product. The maintenance costs of production capacity and used resources are not so high. In this paper a methodology of rapid prototyping of virtual production networks is proposed. It allows to execute production orders on time considered existing logistic constraints.

  14. Heavy flavour production at LHCb

    CERN Document Server

    Barsuk, Sergey

    2016-01-01

    The present write-up reports recent LHCb results on production of quarkonium and open flavour states, as well as selected results on associated production, central exclusive production and pro- duction in heavy ion collisions.

  15. 78 FR 20176 - Credit for Renewable Electricity Production, Refined Coal Production, and Indian Coal Production...

    Science.gov (United States)

    2013-04-03

    ..., Refined Coal Production, and Indian Coal Production, and Publication of Inflation Adjustment Factors and... renewable electricity production, refined coal production, and Indian coal production under section 45... resources, and to 2013 sales of refined coal and Indian coal produced in the United States or a possession...

  16. 77 FR 21835 - Credit for Renewable Electricity Production, Refined Coal Production, and Indian Coal Production...

    Science.gov (United States)

    2012-04-11

    ..., Refined Coal Production, and Indian Coal Production, and Publication of Inflation Adjustment Factors and... electricity production, refined coal production, and Indian coal production under section 45. DATES: The 2012... sales of refined coal and Indian coal produced in the United States or a possession thereof. Inflation...

  17. The safety of fishery products

    OpenAIRE

    Zugravu Gheorghe, Adrian; Turek Rahoveanu, Maria Magdalena; Turek Rahoveanu, Adrian

    2012-01-01

    The paper follows two main objectives: to understand consumers' perception and image of fishery products and to identify communication levers in order to improve the perceived image of fishery products. Orientations in terms of communication are product-focused and aim at enhancing the reputation of products, consequently with impact on product consumption. The present research is focused on the fishery products, regardless of their presentation - fresh, frozen or processed. This paper conduc...

  18. An Explanatory Study of Lean Practices in Job Shop Production/ Special Job Production/ Discrete Production/ Batch Shop Production Industries

    OpenAIRE

    Lavlesh Kumar Sharma; Ravindra Mohan Saxena

    2014-01-01

    In this paper, the study explores the benefits and advantages of Lean Practices or Lean Thinking in Job shop production/ Special job production/ Discrete production/ Batch shop production industries. The Lean Practices have been applied more compatible in Job shop production than in the continuous/ mass production because of several barriers and hurdles in the industrial context that influence the whole processes again and again, this happens due to the lack of knowledge about...

  19. RECONSIDERING ECONOMIC PRODUCTIVITY

    Directory of Open Access Journals (Sweden)

    RIS A. MIHAI

    2014-12-01

    Full Text Available Economy has changed significantly over the past century, in part due to the scientific discoveries, due to the industrial revolution, to the research, development and innovation, but maybe the most important contributor to the economic development is the human resource. We have witnessed significant changes enhancing the levels of productivity, both labor and capital. This paper analyzes productivity in relation to its social and sustainability dimension. The paper follows a previous study, highlighting the most important findings identified and reinterpreting them on the basis of the most recent research papers produced by the scholars in the field. The analysis is focused on the most unsustainable economies worldwide, respectively, the United Arab Emirates, Qatar, Belgium, Kuwait, Singapore, Netherlands, Republic of Korea, Israel, Saudi Arabia, Macedonia, Japan and the United States of America – selected by considering their per capita ecological deficit. The research uses statistical data provided by the United Nations Development Program, the World Bank and the Global Footprint Network. The research combines economical, development and environmental indexes in our attempt to evaluate productivity and to adjust it so that it considers the ecological deficit of the nations. The research hypothesis that generated the study is: the levels of economic productivity obtained by countries are not limited by their biocapacities. The empirical analysis will verify the research question advocating for the need to consider the limited capacity of the planet, in term of natural resources, when promoting economic and social development.

  20. TRANSVERSELY POLARIZED Λ PRODUCTION

    International Nuclear Information System (INIS)

    BORER, D.

    2000-01-01

    Transversely polarized Λ production in hard scattering processes is discussed in terms of a leading twist T-odd fragmentation function which describes the fragmentation of an unpolarized quark into a transversely polarized Λ. We focus on the properties of this function and its relevance for the RHIC and HERMES experiments