WorldWideScience

Sample records for civil engineers philadelphia

  1. Civil Engineering Dispute Resolution

    CERN Document Server

    Osborne, J

    2001-01-01

    Construction work on the civil engineering contract started at Point 5 in August 1998. The new surface buildings and underground structures are necessary to accommodate the CMS detector for the LHC Project. The principal underground works consist of two new shafts, two parallel caverns separated by a supporting pillar, and a number of small connection tunnels and service galleries. A dispute resolution procedure has been included in the contract, whereby a Panel of Adjudicators may be called upon to make a decision in the case of a difference or dispute between the parties. The aim of this paper is to present CERN's first experience of civil engineering Adjudication arising from problems encountered with the ground freezing technique employed to allow construction of two new shafts.

  2. B 150 civil engineering futures

    DEFF Research Database (Denmark)

    Foreword B150 –Civil Engineering Futures consists of interviews made, articles written, and projects presented in connection with the 150th anniversary celebrations of the study of civil engineering in Denmark. Instead of a historical retrospect, it was decided to look into the future. What...... challenges will the next 150 years bring civil engineers? Researchers and lecturers at DTU’s Department of Civil Engineering (known as DTU Byg) suggested possible events, and we also consulted civil engineers and their business partners in the building industry. In this way, a programme was put together...... theme in twentieth century architecture. Together, civil engineer Peter Rice and architect Ian Ritchie created a paradigm shift with their revolutionary ideas for glass facades supported by cables. Glued and bolted constructions made entirely of glass are now a reality in small-scale projects, yet...

  3. Environmental Ethics and Civil Engineering.

    Science.gov (United States)

    Vesilind, P. Aarne

    1987-01-01

    Traces the development of the civil engineering code of ethics. Points out that the code does have an enforceable provision that addresses the engineer's responsibility toward the environment. Suggests revisions to the code to accommodate the environmental impacts of civil engineering. (TW)

  4. Civil Engineering Technology Needs Assessment.

    Science.gov (United States)

    Oakland Community Coll., Farmington, MI. Office of Institutional Planning and Analysis.

    In 1991, a study was conducted by Oakland Community College (OCC) to evaluate the need for a proposed Civil Engineering Technology program. An initial examination of the literature focused on industry needs and the job market for civil engineering technicians. In order to gather information on local area employers' hiring practices and needs, a…

  5. Sustainability issues in civil engineering

    CERN Document Server

    Saride, Sireesh; Basha, B

    2017-01-01

    This compilation on sustainability issues in civil engineering comprises contributions from international experts who have been working in the area of sustainability in civil engineering. Many of the contributions have been presented as keynote lectures at the International Conference on Sustainable Civil Infrastructure (ICSCI) held in Hyderabad, India. The book has been divided into core themes of Sustainable Transportation Systems, Sustainable Geosystems, Sustainable Environmental and Water Resources and Sustainable Structural Systems. Use of sustainability principles in engineering has become an important component of the process of design and in this context, design and analysis approaches in civil engineering are being reexamined to incorporate the principles of sustainable designs and construction in practice. Developing economies are on the threshold of rapid infrastructure growth and there is a need to compile the developments in various branches of civil engineering and highlight the issues. It is th...

  6. Teaching Mathematics to Civil Engineers

    Science.gov (United States)

    Sharp, J. J.; Moore, E.

    1977-01-01

    This paper outlines a technique for teaching a rigorous course in calculus and differential equations which stresses applicability of the mathematics to problems in civil engineering. The method involves integration of subject matter and team teaching. (SD)

  7. Space civil engineering - A new discipline

    Science.gov (United States)

    Sadeh, Willy Z.; Criswell, Marvin E.

    1991-01-01

    Space Civil Engineering is an emerging engineering discipline that focuses on extending and expanding the Civil Engineering know-how and practice to the development and maintenance of infrastructure on celestial bodies. Space Civil Engineering is presently being developed as a new discipline within the Department of Civil Engineering at Colorado State University under a recently established NASA Space Grant College Program. Academic programs geared toward creating Space Civil Engineering Options at both undergraduate and graduate levels are being formulated. Basic ideas and concepts of the curriculum in the Space Civil Engineering Option at both undergraduate and graduate levels are presented. The role of Space Civil Engineering in the Space Program is discussed.

  8. Communication Needs of Thai Civil Engineering Students

    Science.gov (United States)

    Kaewpet, Chamnong

    2009-01-01

    This article reports on an examination of the communication needs of a group of Thai civil engineering students. Twenty-five stakeholders helped identify the communication needs of the students by participating in individual interviews. These included employers, civil engineers, civil engineering lecturers, ex-civil engineering students of the…

  9. Job Prospects for Civil Engineers.

    Science.gov (United States)

    Basta, Nicholas

    1985-01-01

    Government programs and renewed industrial activity have combined with stable enrollments to create bright job prospects for civil engineers. Areas with good opportunities include highway reconstruction and rehabilitation, water-resource management, and new factory construction. The subspecialty of structural engineering has a growing need in…

  10. Artificial Intelligence in Civil Engineering

    Directory of Open Access Journals (Sweden)

    Pengzhen Lu

    2012-01-01

    Full Text Available Artificial intelligence is a branch of computer science, involved in the research, design, and application of intelligent computer. Traditional methods for modeling and optimizing complex structure systems require huge amounts of computing resources, and artificial-intelligence-based solutions can often provide valuable alternatives for efficiently solving problems in the civil engineering. This paper summarizes recently developed methods and theories in the developing direction for applications of artificial intelligence in civil engineering, including evolutionary computation, neural networks, fuzzy systems, expert system, reasoning, classification, and learning, as well as others like chaos theory, cuckoo search, firefly algorithm, knowledge-based engineering, and simulated annealing. The main research trends are also pointed out in the end. The paper provides an overview of the advances of artificial intelligence applied in civil engineering.

  11. Space Civil Engineering option - A progress report

    Science.gov (United States)

    Criswell, Marvin E.; Sadeh, Willy Z.

    1992-01-01

    Space Civil Engineering is an emerging engineering discipline that focuses on extending and expanding Civil Engineering to the development, operation, and maintenance of infrastructures on celestial bodies. Space Civil Engineering is presently being developed as a new discipline within the Department of Civil Engineering at Colorado State University and with support of the NASA Space Grant College Program. Academic programs geared toward creating Space Civil Engineering Options at both undergraduate and graduate levels are being formulated. Basic ideas and concepts and the current status of the curriculum in the Space Civil Engineering Option primarily at the undergraduate level are presented.

  12. B 150 civil engineering futures

    DEFF Research Database (Denmark)

    theme in twentieth century architecture. Together, civil engineer Peter Rice and architect Ian Ritchie created a paradigm shift with their revolutionary ideas for glass facades supported by cables. Glued and bolted constructions made entirely of glass are now a reality in small-scale projects, yet...... related to sustainability – a Workshop on Traffic. The workshop discussed traffic prognoses and the way they are used in the preparation of urban transport and traffic strategies. Civil engineer Jonas Eliasson spoke about the experience in Sweden of developing a database for traffic prognoses. The main...... to develop a technically advanced form of aesthetics. The Master Class in low energy buildings was led by civil engineer, Svend Svendsen, a Professor at DTU Byg. Together with colleagues and students, he has achieved an extensive knowledge of Integrated Design. In fact, the situation is that our knowledge...

  13. Geometric procedures for civil engineers

    CERN Document Server

    Tonias, Elias C

    2016-01-01

    This book provides a multitude of geometric constructions usually encountered in civil engineering and surveying practice.  A detailed geometric solution is provided to each construction as well as a step-by-step set of programming instructions for incorporation into a computing system. The volume is comprised of 12 chapters and appendices that may be grouped in three major parts: the first is intended for those who love geometry for its own sake and its evolution through the ages, in general, and, more specifically, with the introduction of the computer. The second section addresses geometric features used in the book and provides support procedures used by the constructions presented. The remaining chapters and the appendices contain the various constructions. The volume is ideal for engineering practitioners in civil and construction engineering and allied areas.

  14. Ecological Engineering and Civil Engineering works

    NARCIS (Netherlands)

    Van Bohemen, H.D.

    2004-01-01

    This thesis provides a survey of the research results of the relationship between on the one hand the construction, management and maintenance of civil engineering works, and on the other hand the environment, nature and landscape, with the main focus on motorways and coastal protection. The growing

  15. Ecological Engineering and Civil Engineering works

    NARCIS (Netherlands)

    Van Bohemen, H.D.

    2004-01-01

    This thesis provides a survey of the research results of the relationship between on the one hand the construction, management and maintenance of civil engineering works, and on the other hand the environment, nature and landscape, with the main focus on motorways and coastal protection. The growing

  16. History of Civil Engineering Modal Analysis

    DEFF Research Database (Denmark)

    Brincker, Rune

    2008-01-01

    techniques are available for civil engineering modal analysis. The testing of civil structures defers from the traditional modal testing in the sense, that very often it is difficult, or sometimes impossible, to artificially excite a large civil engineering structure. Also, many times, even though...

  17. History of Civil Engineering Modal Analysis

    DEFF Research Database (Denmark)

    Brincker, Rune

    2008-01-01

    techniques are available for civil engineering modal analysis. The testing of civil structures defers from the traditional modal testing in the sense, that very often it is difficult, or sometimes impossible, to artificially excite a large civil engineering structure. Also, many times, even though...

  18. Claims in civil engineering contracts

    CERN Document Server

    Speirs, N A

    1999-01-01

    This paper considers claims arising during civil engineering construction contracts. The meaning of the word 'claim' is considered and its possible implications for additional cost and time to completion. The conditions of the construction contract selected will influence the risk apportionment between contractor and client and the price offered by the contractor for the work. Competitive bidding constraints and profit margins in the construction industry, however, may also influence the price offered. This in turn can influence the likelihood of claims arising. The client from his point of view is concerned to complete the work within an agreed time and budget. The circumstances under which claims may arise are reviewed in relation to typical conditions of contract. These circumstances are then related to the CERN LHC civil works. Ways of avoiding claims, where this is possible, are considered. Finally, the means of evaluation of claims and their settlement are considered.

  19. ATLAS Civil Engineering Point 1

    CERN Multimedia

    Jean-Claude Vialis

    1998-01-01

    Different phases of realisation to Point 1 : zone of the ATLAS experiment After watching this film you can get the view of the civil engineering work at POINT1 where the ATLAS will be built. 03-11-1998 The video starts with the view of the POINT1 taken from the roof of the building 33. 04-11-1998 View of the installation of the entrance of the SDX1 18/19-11-1998 Installation of the rafters to the building PX15

  20. Educating Civil Engineers for Developing Countries

    Science.gov (United States)

    Stanley, D.

    1974-01-01

    Based on engineering teaching experience in Africa and Asia, ideas are presented on educating civil engineers for developing countries, especially those in Africa. Some of the problems facing educational planners, teachers, and students are addressed, including responsibilities of a newly graduated civil engineer, curriculum development, and…

  1. Civil Engineering: Improving the Quality of Life.

    Science.gov (United States)

    One Feather, Sandra

    2002-01-01

    American Indian civil engineers describe the educational paths that led them to their engineering careers, applications of civil engineering in reservation communities, necessary job skills, opportunities afforded by internship programs, continuing education, and the importance of early preparation in math and science. Addresses of 12 resource Web…

  2. ATLAS Civil Engineering Point 1

    CERN Document Server

    Jean-Claude Vialis

    1999-01-01

    ATLAS Civil Engineering - Point 1 In the film you can see various stages of construction in Point 1: that is the experiment zone for ATLAS experimentation. One part of the video is filmed on the surface of Point 1. Therefore you can get the view of the hall SX 1 and the cranes. Cranes are located close to the ridge of the hall roof. The film gives you the view of the hall that covers the caps and the wells to underground cavern where the experiment will be implemented. The machinery for excavation lifts and cranes as well as the stock areas can also be seen. There are iron mounting and concrete works too

  3. Developing marketing system for civil engineering firm

    Directory of Open Access Journals (Sweden)

    Jovićević Ratko

    2006-01-01

    Full Text Available In this paper intention was to reveal insufficient connection between theory and practice in civil engineering as indispose condition for more efficient solving problems which products unstable environment of engineering firms. Successful connection between theory and practice, when we talk about marketing in civil engineering, did not develop at satisfied way. Civil engineering is, in aspect of implementation of modern philosophy of marketing, in big residue related to the other spices of economy. In that order we want to appoint on possibility to resolve this discrepancy.

  4. Competencies Framework for Civil Engineer in Thailand

    Directory of Open Access Journals (Sweden)

    Phanudej Kudngaongarm

    2012-02-01

    Full Text Available The civil engineering industry now faces with many problems such as poorly planned projects, breach of the delivery date, erroneous budget estimation, uncontrolled system functionality changes, and inappropriate documentation that all lead to the dissatisfaction of clients. One of the main concerns of civil engineering industry is to develop the talent of its human resources, since the quality and innovation of its products and services depend to a great extent on the knowledge, the ability and the talent that civil engineers apply in the development process. A competency framework defines a set of knowledge, skills, and behaviors that professionals must have to excel in their careers. A competency framework facilitates the identification of training needs and guides the design of a professional development program. In this paper we propose a competency framework for civil engineers, whose design is based on the activities and interactions that they perform during the civil development process. Thus, competency framework for civil engineers defines a set of knowledge, abilities and key behaviors, with special emphasis in the soft skills. The organization that adopts this framework must define and integrate the specific competencies needed by for civil engineers to allow them to fulfill their goals.

  5. Mechanics, Models and Methods in Civil Engineering

    CERN Document Server

    Maceri, Franco

    2012-01-01

    „Mechanics, Models and Methods in Civil Engineering” collects leading papers dealing with actual Civil Engineering problems. The approach is in the line of the Italian-French school and therefore deeply couples mechanics and mathematics creating new predictive theories, enhancing clarity in understanding, and improving effectiveness in applications. The authors of the contributions collected here belong to the Lagrange Laboratory, an European Research Network active since many years. This book will be of a major interest for the reader aware of modern Civil Engineering.

  6. Opportunities in Civil Engineering. [VGM Career Horizons Series].

    Science.gov (United States)

    Hagerty, D. Joseph; Heer, John E., Jr.

    This book presents information on career opportunities in civil engineering. Chapter 1 focuses on the scope of civil engineering, discussing: role of scientist, engineer, and technologists; engineering and engineering technology; civil engineer's role and obligations; and other information. Chapter 2 considers such aspects of the education for…

  7. Civil Engineering in Primary Schools

    Science.gov (United States)

    Brown, Martin; Strong, Alan

    2010-01-01

    For many children of primary school age, an engineer is the man who comes to service the central heating system or who fixes the family car when it breaks down. Most have never met a "real" professional engineer, and have no idea of what is involved in the exciting world of engineering. Most assume that engineers are men. To try to remove these…

  8. Civil Engineering in Primary Schools

    Science.gov (United States)

    Brown, Martin; Strong, Alan

    2010-01-01

    For many children of primary school age, an engineer is the man who comes to service the central heating system or who fixes the family car when it breaks down. Most have never met a "real" professional engineer, and have no idea of what is involved in the exciting world of engineering. Most assume that engineers are men. To try to…

  9. Retraining the Modern Civil Engineer.

    Science.gov (United States)

    Priscoli, Jerome Delli

    1983-01-01

    Discusses why modern engineering requires social science and the nature of planning. After these conceptional discussions, 12 practical tools which social science brings to engineering are reviewed. A tested approach to training engineers in these tools is then described. Tools include institutional analysis, policy profiling, and other impact…

  10. Optimal Vibration Control of Civil Engineering Structures

    DEFF Research Database (Denmark)

    Thesbjerg, Leo

    In designing large civil engineering structures, an important consideration is prospective dynamic loadings which may include earthquake ground motion, wind gusts, severe sea states and moving vehicles, rotating and reciprocating machinery and others. successful design of such structures requires...... providing for the safety and integrity of the structure, and in some cases also providing for a measure of comfort for the occupants during such loading which the structure and its occupants must endure. Due to these uncertainties, the civil engineering community has traditionally adopted a very...

  11. CIVIL ENGINEERS' ROLES IN PUBLIC WORKS

    Science.gov (United States)

    Murata, Teruaki

    Recently, the public interests are becoming high in the way of executing public works and the future direction of infrastructure development, which raises nation-wide discussion on these issues. How should we make our country's growth strategy for sustainable development? How should we realize the grand design of infrastructure needed for the implementation of such a strategy? It is obvious that further discussions are needed for these challenging questions. With an aim to promote such discussions, this paper reviews the history of public works and the professional practices (or accomplishments) of our great civil engineers, and discusses the future of public works and the roles of civil engineers based on their origin. Further, in this paper, the author, as the chairman of the Public Works Committee of Japan Civil Engineering Contractors Association, introduces the Association's proposal of "realization of an attractive construction industry." However, for its realization, sustainable institutional arrangements under social consensus are indispensable. Also, individual engineer must establish his/her own identity based on sense of social ethics. It is the author's hope that, through these journals, the professional practices of civil engineers will be widely known to the public with objective logics and discussed to achieve social consensus.

  12. Risk Analysis in Civil Engineering

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle

    Until fairly recently there has been a tendency for structural engineering to be dominated by deterministic thinking, characterised in design calculations by the use of specified minimum material properties, specified load intensities and by prescribed procedures for computing stresses and deflec......Until fairly recently there has been a tendency for structural engineering to be dominated by deterministic thinking, characterised in design calculations by the use of specified minimum material properties, specified load intensities and by prescribed procedures for computing stresses...

  13. The language of architecture and civil engineering

    CERN Document Server

    Riejos, Ana Ma Roldan

    2011-01-01

    This book not only provides unique and in-depth information to understand the language of architecture and civil engineering, it is also helpful for students and professionals who need to improve their linguistic skills. The LACE book includes plenty of

  14. Aluminium building and civil engineering structures

    NARCIS (Netherlands)

    Soetens, F.; Mennink, J.

    1999-01-01

    The design of aluminium structures in building and civil engineering applications is different from designing in traditional materials. This difference is based on the physical and mechanical properties of the material and the freedom of cross-sectional shape provided by the extrusion manufacturing

  15. The Language of Civil Engineering: Descriptive, Prescriptive, and Persuasive.

    Science.gov (United States)

    Machauf, Liora

    1990-01-01

    Focuses on the language of civil engineering as manifested in the professional journal "Civil Engineering ASCE." Articles are analyzed, both syntactically and lexically, in terms of three major rhetorical functions: description, prescription, and persuasion. (17 references) (GLR)

  16. Biotechnologies and biomimetics for civil engineering

    CERN Document Server

    Labrincha, J; Diamanti, M; Yu, C-P; Lee, H

    2015-01-01

    Putting forward an innovative approach to solving current technological problems faced by human society, this book encompasses a holistic way of perceiving the potential of natural systems. Nature has developed several materials and processes which both maintain an optimal performance and are also totally biodegradable, properties which can be used in civil engineering. Delivering the latest research findings to building industry professionals and other practitioners, as well as containing information useful to the public, ‘Biotechnologies and Biomimetics for Civil Engineering’ serves as an important tool to tackle the challenges of a more sustainable construction industry and the future of buildings.

  17. Probability, statistics, and decision for civil engineers

    CERN Document Server

    Benjamin, Jack R

    2014-01-01

    Designed as a primary text for civil engineering courses, as a supplementary text for courses in other areas, or for self-study by practicing engineers, this text covers the development of decision theory and the applications of probability within the field. Extensive use of examples and illustrations helps readers develop an in-depth appreciation for the theory's applications, which include strength of materials, soil mechanics, construction planning, and water-resource design. A focus on fundamentals includes such subjects as Bayesian statistical decision theory, subjective probability, and

  18. Applied statistics for civil and environmental engineers

    CERN Document Server

    Kottegoda, N T

    2009-01-01

    Civil and environmental engineers need an understanding of mathematical statistics and probability theory to deal with the variability that affects engineers'' structures, soil pressures, river flows and the like. Students, too, need to get to grips with these rather difficult concepts.This book, written by engineers for engineers, tackles the subject in a clear, up-to-date manner using a process-orientated approach. It introduces the subjects of mathematical statistics and probability theory, and then addresses model estimation and testing, regression and multivariate methods, analysis of extreme events, simulation techniques, risk and reliability, and economic decision making.325 examples and case studies from European and American practice are included and each chapter features realistic problems to be solved.For the second edition new sections have been added on Monte Carlo Markov chain modeling with details of practical Gibbs sampling, sensitivity analysis and aleatory and epistemic uncertainties, and co...

  19. Vibrational Based Inspection of Civil Engineering Structures

    DEFF Research Database (Denmark)

    Rytter, Anders

    at the University of Aalborg from 1988 to 1991. Secondly, a research project, In-Field Vibration Based Inspection of Civil Engineering Structures, which has been performed as a pilot project by the Consulting Engineers Rambøll, Hannemann and Højlund in cooperation with the department of Building Technology......The thesis has been written in relation to two different research projects. Firstly, an offshore test programme, Integrated Experimental/Numerical Analysis of the Dynamic behavior of offshore structures, which was performed at the department of Building Technology and Structural Engineering...... and Structural Engineering at the University of Aalborg since the beginning of 1992. Both projects have been supported by the Danish Technical Research Council. Further, the first mentioned project was supported by the Danish Energy Agency. Their financial support is gratefully acknowledged....

  20. Metaheuristics and optimization in civil engineering

    CERN Document Server

    Bekdaş, Gebrail; Nigdeli, Sinan

    2016-01-01

    This timely book deals with a current topic, i.e. the applications of metaheuristic algorithms, with a primary focus on optimization problems in civil engineering. The first chapter offers a concise overview of different kinds of metaheuristic algorithms, explaining their advantages in solving complex engineering problems that cannot be effectively tackled by traditional methods, and citing the most important works for further reading. The remaining chapters report on advanced studies on the applications of certain metaheuristic algorithms to specific engineering problems. Genetic algorithm, bat algorithm, cuckoo search, harmony search and simulated annealing are just some of the methods presented and discussed step by step in real-application contexts, in which they are often used in combination with each other. Thanks to its synthetic yet meticulous and practice-oriented approach, the book is a perfect guide for graduate students, researchers and professionals willing to applying metaheuristic algorithms in...

  1. Simple, Complex, Innovative: Design Education at Civil Engineering

    NARCIS (Netherlands)

    Van Nederveen, G.A.; Soons, F.A.M.; Suddle, S.I.; De Ridder, H.

    2011-01-01

    In faculties such as Civil Engineering, design is a not a core activity. Core activities at Civil Engineering are structural engineering, structural analysis, mechanics, fluid dynamics, etc. Design education has a relatively small share in the curriculum, compared to faculties such as Industrial

  2. ISIS Technologies for Smart Civil Engineering Infrastructure

    Institute of Scientific and Technical Information of China (English)

    Aftab A. Mufti; Kenneth W. Neale

    2004-01-01

    For more than a century, important civil engineering structures such as bridges, high-rise buildings, dams and marine platforms have contained iron or steel as the reinforcement for concrete or wood (ISIS Canada Strategic Plan, 2000). The useful lives of such structures have often been severely limited by the corrosion of this ferrous component. Much thought has been given in recent years to constructing structures that are lighter, stronger and non-corrosive. These innovative structures are new and for these to be accepted by the engineering community monitoring is mandatory. ISIS Canada has been developing such structures and monitoring them. In this paper, innovative bridge decks that have been implemented is described.

  3. Active IR-applications in civil engineering

    Science.gov (United States)

    Wiggenhauser, H.

    2002-06-01

    Applications of IR-thermography in civil engineering are not limited to the identification of heat losses in building envelopes. As it is well known from other areas of non-destructive testing, active IR-thermographic methods such as cooling down or lock-in thermography improves the results in many investigations. In civil engineering these techniques have not been used widely. Mostly thermography is used in a quasi-static manner. The interpretation of moisture measurements with thermography on surfaces can be very difficult due to several overlapping effects: emissivity changes due to composition, heat transfer through wet sections of the specimen, cooling through air flow or reflected spurious radiation sources. These effects can be reduced by selectively measuring the reflection in two wavelength windows, one on an absorption band of water and another in a reference band and then combining the results in a moisture index image. Cooling down thermography can be used to identify subsurface structural deficiencies. For building materials like concrete these measurements are performed on a much longer time scale than in flash lamp experiments. A quantitative analysis of the full cooling down process over several minutes can reliably identify defects at different depths. Experiments at BAM have shown, that active thermography is capabale of identifying structural deficiencies or moist areas in building materials much more reliable than quasi-static thermography.

  4. Applications of metaheuristic optimization algorithms in civil engineering

    CERN Document Server

    Kaveh, A

    2017-01-01

    The book presents recently developed efficient metaheuristic optimization algorithms and their applications for solving various optimization problems in civil engineering. The concepts can also be used for optimizing problems in mechanical and electrical engineering.

  5. Structural Control Systems Implemented in Civil Engineering

    Directory of Open Access Journals (Sweden)

    Cristian Pastia

    2005-01-01

    Full Text Available Over the past three decades, a great interest has been generated by the use of protection systems to mitigate the effects of dynamic environmental hazards on civil engineering structures, such as earthquakes and strong wind. These control systems develop controllable forces to add or dissipate energy in a structure, or both, due to specific devices integrated with sensors, controllers and real – time process to operate. The paper includes the advantages of these technologies consisting of the following sections: 1 represents an introduction, 2 deals with passive control system, 3 regards some control techniques, 4 concerns hybrid control techniques, 5 contains semi – active control techniques, and 6 is dedicated to general conclusions.

  6. Civil engineering applications of ground penetrating radar

    CERN Document Server

    Pajewski, Lara

    2015-01-01

    This book, based on Transport and Urban Development COST Action TU1208, presents the most advanced applications of ground penetrating radar (GPR) in a civil engineering context, with documentation of instrumentation, methods, and results. It explains clearly how GPR can be employed for the surveying of critical transport infrastructure, such as roads, pavements, bridges, and tunnels, and for the sensing and mapping of underground utilities and voids. Detailed attention is also devoted to use of GPR in the inspection of geological structures and of construction materials and structures, including reinforced concrete, steel reinforcing bars, and pre/post-tensioned stressing ducts. Advanced methods for solution of electromagnetic scattering problems and new data processing techniques are also presented. Readers will come to appreciate that GPR is a safe, advanced, nondestructive, and noninvasive imaging technique that can be effectively used for the inspection of composite structures and the performance of diagn...

  7. Civil Engineering Construction of Underground Works

    CERN Document Server

    Rammer, H

    1999-01-01

    For the first time at CERN, new shafts and caverns will be excavated inside a surface building. The LHC civil engineering construction for the ATLAS experiment has been designed such that the experimental hall will be completed to the extent that it can provide a secure, weatherproof and sound insulated covering to the shaft excavation area. The construction of the two access shafts and the experimental cavern will follow and will be carried out inside the building. This unconventional method of working allows the excavation of the Molasse rock in the dry, which is essential for this type of rock, and ensures reduced environmental pollution by noise and dust. The paper will present the technical infrastructure required for this particular construction method, explain its advantages and disadvantages, and compare it with a conventional method of underground excavations to be used on the same work site for the construction of the service cavern.

  8. Consolidation on civil engineering and technical infrastructure

    CERN Document Server

    Alves, P; Pepinster, P; van Baaren, W; CERN. Geneva. ST Division

    2003-01-01

    The use and age of the civil engineering structure (office buildings, halls, tunnels) and of tertiary technical equipment (mainly HVAC and electricity) at CERN is such that their renovation must be considered in the near future. Due to the large number of buildings and equipment in these conditions, and the restricted budget available it is extremely important to define priorities. The aim of this paper is to give an overview of the current conditions and the related problems, based on data analysis of CERN database and confronting it with the inventory made at CERN by an external company. After having identified the most frequent problems and repairs to carry out, a planning for intervention is therefore presented optimizing the safety aspects, maintenance costs and comfort for the users. The timescale of this intervention is related to the money that will be available in the coming years.

  9. Structural and Topology Optimization of Complex Civil Engineering Structures

    DEFF Research Database (Denmark)

    Hald, Frederik; Kirkegaard, Poul Henning; Andersen, Lars Vabbersgaard

    2013-01-01

    This paper shows the use of topology optimization for finding an optimized form for civil engineering structures. Today topology optimization and shape optimization have been integrated in several commercial finite element codes. Here, the topology of two complex civil engineering structures...

  10. M.Sc. in Civil and Structural Engineering

    DEFF Research Database (Denmark)

    The catalogue contain a list of project ideas proposed by the scientific staff at the Department of Civil Engineering, Aalborg University, and a number of companies. Most of the project ideas in this catalogue may form the basis for long and short candidate projects as well as regular 3rd semester...... projects at the M.Sc. programme in Civil and Structural Engineering....

  11. M.Sc. in Civil and Structural Engineering

    DEFF Research Database (Denmark)

    The following pages contain a list of project ideas proposed by the scientific staff at the Department of Civil Engineering, Aalborg University, and a number of companies. Most of the project ideas in this catalogue may form the basis for long and short master projects as well as regular 3rd...... semester projects at the M.Sc. programme in Civil and Structural Engineering....

  12. M.Sc. in Civil and Structural Engineering

    DEFF Research Database (Denmark)

    This catalogue contains a list of project ideas proposed by the scientific staff at the Department of Civil Engineering, Aalborg University, and a number of companies. Most of the project ideas in this catalogue may form the basis for long and short candidate projects as well as regular 3rd...... semester projects at the M.Sc. programme in Civil and Structural Engineering....

  13. M.Sc. in Civil and Structural Engineering

    DEFF Research Database (Denmark)

    Clausen, Johan

    The report contain a list of project ideas proposed by the scientific staff at the Department of Civil Engineering, Aalborg University, and a number of companies. Most of the project ideas in this catalogue may form the basis for long and short candidate projects as well as regular 3rd semester...... projects at the M.Sc. programme in Civil and Structural Engineering....

  14. Ageing in civil engineering materials and structures

    Energy Technology Data Exchange (ETDEWEB)

    Jaeger, Jean-Marc [SETEC TPI, Tour Gamma D 58, quai de la Rapee, 75583 Paris (France)

    2005-07-01

    SETEC TPI will address the 'Aging' topic of the Dijon Symposium by talking about: aging in civil engineering materials and structures, prevention of aging phenomena, in-operation monitoring of degradations related to aging and compensatory measures required to maintain a good safety level. Works as the Millau viaduct, the EdF skyscraper at La Defense - Paris, the renovation of the Grand Palais of Paris and special structures with Monaco's floating dam as well as the 'number 10' shaped gateway boat at Marseilles are illustrations for the issues discussed. The durability of civil engineering structures has become a major concern for designers. The Millau viaduct is designed for a service life of 120 years, and the Monaco dam for 100 years. Calculation rules have been evolving toward the incorporation of the concept of life cycle, for example, the Eurocodes 2 rules (reinforced concrete). The talk will expose the factors which are being taken into account to delay aging versus structure types. This part will be focused towards materials and corresponding regulations: - Reinforced concrete (coating of reinforcements, opening of cracks, choice of reinforcement types), BAEL and Eurocodes 2 rules; - Frame steel (protection, sacrificial anode), CM66 and Eurocodes 3 rules. New materials will also be mentioned: - Ultra high-performance fiber/concrete, with the example of CERACEM applied at Millau for the covering of the toll area barrier; - Titanium, which is starting to appear in the building trades, as for instance for the Beijing China Opera House shell. The second part of the talk will be devoted to a specific case namely, the 'number 10' shaped gateway bridge, a prestressed concrete structure immersed in the Port of Marseilles, which will be used to illustrate the aging phenomenon in a corrosive environment. We will focus on the types of inspection series performed by the Autonomous Port Authority of Marseilles to check the behavior of

  15. Modelling of Electrokinetic Processes in Civil and Environmental Engineering Applications

    DEFF Research Database (Denmark)

    Paz-Garcia, Juan Manuel; Johannesson, Björn; Ottosen, Lisbeth M.

    2011-01-01

    A mathematical model for the electrokinetic phenomena is described. Numerical simulations of different applications of electrokinetic techniques to the fields of civil and environmental engineering are included, showing the versatility and consistency of the model. The electrokinetics phenomena...

  16. Ideas in Practice: The Mississippi River: Humanities and Civil Engineering.

    Science.gov (United States)

    Vonalt, Larry; And Others

    1980-01-01

    Describes a course offered for the freshman civil engineering major at the University of Missouri-Rolla. The rationale of developing the course which focuses on the symbolic, social, and technological aspects of the Mississippi River is included. (HM)

  17. Automated Modal Parameter Estimation of Civil Engineering Structures

    DEFF Research Database (Denmark)

    Andersen, Palle; Brincker, Rune; Goursat, Maurice

    In this paper the problems of doing automatic modal parameter extraction of ambient excited civil engineering structures is considered. Two different approaches for obtaining the modal parameters automatically are presented: The Frequency Domain Decomposition (FDD) technique and a correlation...

  18. Mechanical Modelling and Computational Issues in Civil Engineering

    OpenAIRE

    2005-01-01

    In this edited book various novel approaches to problems of modern civil engineering are demonstrated. Experts associated within the Lagrange Laboratory present recent research results in civil engineering dealing both with modelling and computational aspects. Many modern topics are covered, such as monumental dams, soil mechanics and geotechnics, granular media, contact and friction problems, damage and fracture, new structural materials, and vibration damping -presenting the state of the ar...

  19. Civil engineering studies for major projects after LHC

    CERN Document Server

    Osborne, John; Perez-Duenas, Eliseo

    2011-01-01

    CERN civil engineers are heavily involved in studying several major potential collider projects to succeed/complement the LHC. Infrastructure works typically represent one third of the cost of major physics projects, so it's critical that the construction costs are well understood from the conceptual stage. For example, CERN are studying infrastructure requirements for the Linear Collider (CLIC & ILC) and the LHeC projects. This paper presents some of the key civil engineering challenges faced in such large scale projects.

  20. Fuzzy Sets Applications in Civil Engineering Basic Areas

    OpenAIRE

    UĞUR, Latif Onur; BAYKAN, Umut Naci

    2016-01-01

    Civil engineering is a professional engineering discipline that deals with the design, construction, and maintenance of the physical and naturally built environment, including works like roads, bridges, canals, dams, and buildings. This paper presents some Fuzzy Logic (FL) applications in civil engeering discipline and shows the potential of facilities of FL in this area. The potential role of fuzzy sets in analysing system and human uncertainty is investigated in the paper. The main finding ...

  1. Review for dynamic researches in civil engineering in recent years

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Structure dynamic research is a hot field in civil engineering.It involves in many challenge topics,such as dynamic analysis and tests under earthquake,wind or other dynamic excitations.This paper introduces main dynamic researches in civil engineering in recent years,which will be classified into five aspects,especially for researches published in Science in China Series E:Technological Sciences.

  2. Pluridisciplinarity vs. interdisciplinarity in civil engineering education in seismic areas

    Directory of Open Access Journals (Sweden)

    Emil-Sever GEORGESCU

    2012-12-01

    Full Text Available Civil engineers are involved in building and maintaining a built environment that meets the sustainable development requirements. This environment is interdisciplinary in its nature, as it results from an interaction between different actors (architects, city planners, authorities, clients, civil engineers. Professional formation and training of engineers is a result of the didactic and technical efforts, which later will be reflected in the way constructions are being designed and built, so that engineers are not considered simple workers. Thus, when discussing professional formation and training of engineers, one should debate the necessary steps they have to take in their relationship with other disciplines. Practicing civil engineering in seismic risk areas in Romania adds specific requirements.

  3. Applications of Statistics and Probability in Civil Engineering

    DEFF Research Database (Denmark)

    Faber, Michael Havbro

    contains the proceedings of the 11th International Conference on Applications of Statistics and Probability in Civil Engineering (ICASP11, Zürich, Switzerland, 1-4 August 2011). The book focuses not only on the more traditional technical issues, but also emphasizes the societal context...... and reliability in engineering; to professionals and engineers, including insurance and consulting companies working with natural hazards, design, operation and maintenance of civil engineering and industrial facilities; and to decision makers and professionals in the public sector, including nongovernmental...

  4. Proposal for the increase of the contract amounts for LHC civil engineering construction and civil engineering consultancy contracts

    CERN Document Server

    2001-01-01

    This document concerns the increase of the contract amounts for LHC civil engineering construction contracts and civil engineering consultancy contracts. The Finance Committee is invited to agree to the increase of the contract amounts with: - the joint venture TEERAG-ASDAG (AT), C. BARESEL (DE) and LOCHER (CH) for civil engineering construction, package 1, for a revised total amount of 91 500 000 Swiss francs, subject to revision; - the joint venture EDF (FR) and KNIGHT&PIESOLD (GB) for the provision of civil engineering consultancy services, package 1, for a revised total amount of 14 400 000 Swiss francs, subject to revision; - the joint venture TAYLOR WOODROW (GB), AMEC (GB) and SPIE BATIGNOLLES (FR) for civil engineering construction, package 3a, for a revised total amount of 118 000 000 Swiss francs, subject to revision; - the joint venture BROWN&ROOT (GB), INTECSA (ES) and HIDROTECNICA (PT) for the provision of civil engineering consultancy services, package 3, for a revised total amount of 14 ...

  5. Materials for construction and civil engineering science, processing, and design

    CERN Document Server

    Margarido, Fernanda

    2015-01-01

    This expansive volume presents the essential topics related to construction materials composition and their practical application in structures and civil installations. The book's diverse slate of expert authors assemble invaluable case examples and performance data on the most important groups of materials used in construction, highlighting aspects such as nomenclature, the properties, the manufacturing processes, the selection criteria, the products/applications, the life cycle and recyclability, and the normalization. Civil Engineering Materials: Science, Processing, and Design is ideal for practicing architects; civil, construction, and structural engineers, and serves as a comprehensive reference for students of these disciplines. This book also: ·       Provides a substantial and detailed overview of traditional materials used in structures and civil infrastructure ·       Discusses properties of natural and synthetic materials in construction and materials' manufacturing processes ·  �...

  6. International Civil and Infrastructure Engineering Conference 2014

    CERN Document Server

    Yusoff, Marina; Alisibramulisi, Anizahyati; Amin, Norliyati; Ismail, Zulhabri

    2015-01-01

    The special focus of this proceedings is to cover the areas of infrastructure engineering and sustainability management. The state-of-the art information in infrastructure and sustainable issues in engineering covers earthquake, bioremediation, synergistic management, timber engineering, flood management and intelligent transport systems. It provides precise information with regards to innovative research development in construction materials and structures in addition to a compilation of interdisciplinary finding combining nano-materials and engineering.

  7. International Civil and Infrastructure Engineering Conference 2013

    CERN Document Server

    Yusoff, Marina; Ismail, Zulhabri; Amin, Norliyati; Fadzil, Mohd

    2014-01-01

    The special focus of this proceedings is to cover the areas of infrastructure engineering and sustainability management. The state-of-the art information in infrastructure and sustainable issues in engineering covers earthquake, bioremediation, synergistic management, timber engineering, flood management and intelligent transport systems. It provides precise information with regards to innovative research development in construction materials and structures in addition to a compilation of interdisciplinary finding combining nano-materials and engineering.

  8. Blade containment evaluation of civil aircraft engines

    Institute of Scientific and Technical Information of China (English)

    Yang Bin

    2013-01-01

    The potential hazard resulting from uncontained turbine engine rotor blade failure has always been the long-term concern of each aero engine manufacturer,and to fully contain the failed blades under critical operating conditions is also one of the most important considerations to meet the rotor integrity requirements.Usually,there are many factors involving the engine containment capability which need to be reviewed during the engine design phases,such as case thickness,rotor support structure,blade weight and shape,etc.However,the premier method to demonstrate the engine containment capability is the fan blade-off test and margin of safety (MS) analysis.Based on a concrete engine model,this paper aims to explain the key points of aero engine containment requirements in FAR Part 33,and introduces the implementation of MS analysis and fan blade-off test in the engine airworthiness certification.Through the introduction,it would be greatly helpful to the industrial community to evaluate the engine containment capability and prepare the final test demonstration in engine certification procedure.

  9. Usage of dynamic plans in civil engineering of Serbia

    Directory of Open Access Journals (Sweden)

    Zlatanović Milorad

    2011-01-01

    Full Text Available For a successful realization of a civil engineering project, it is necessary to possess good quality dynamic plans of construction works and of resource involvement. Depending on the type and size of the structure, appropriate type of dynamic plan ought to be used. The plan realization must constantly be observed and updated in order to ensure their full effectiveness. This paper presents the results of a research through a survey of dynamic plan implementation in our civil engineering practice. The results are based on the data processed from the responses to the questions asked in the survey of 45 construction enterprises in Serbia.

  10. Situated learning methodologies and assessment in civil engineering structures education

    Science.gov (United States)

    Bertz, Michael Davis

    This thesis describes an overarching study of civil engineering undergraduate structural education through student performance in recalling and applying basic structural engineering knowledge, and the viability of alternative situated learning environments for more effectively supporting the learning of this knowledge. To properly ground this study, a thorough investigation of related work in assessment, cognitive science, educational technology, and design education was completed, with connections and applications to civil engineering education highlighted. The experimental work of the thesis is organized into three parts: an assessment of civil engineering undergraduates' fundamental structural engineering knowledge and abilities; the development and testing of a software support environment for situated learning, the Civil Engineering Learning Library (CELL); and, the implementation and evaluation of the design studio, a pedagogical model for situated learning in the classroom. The results of the assessment study indicate that civil engineering seniors (and also students earlier in the curriculum) have difficulty retaining and applying basic knowledge of structural behavior, especially doing so in a flexible fashion in design situations. The survey also suggests that visualization plays an important role in understanding structural behavior. Tests with the CELL system show that a cognitively-flexible multimedia environment can support structural learning, but were inconclusive about whether the computer-based system helped the students to learn better than conventional classroom lecture. Two trial implementations of the design studio indicate that the studio model can serve as a powerful situated learning environment, and that it can be scaled up to reasonable class sizes. Significant requirements are associated with this model, however, primarily in faculty involvement, but also in physical resources and student time. In addition to these conclusions about the

  11. Applications of Statistics and Probability in Civil Engineering

    DEFF Research Database (Denmark)

    Faber, Michael Havbro

    and reliability in engineering; to professionals and engineers, including insurance and consulting companies working with natural hazards, design, operation and maintenance of civil engineering and industrial facilities; and to decision makers and professionals in the public sector, including nongovernmental......contains the proceedings of the 11th International Conference on Applications of Statistics and Probability in Civil Engineering (ICASP11, Zürich, Switzerland, 1-4 August 2011). The book focuses not only on the more traditional technical issues, but also emphasizes the societal context...... of the decision making problems including the interaction between stakeholders. This holistic perspective supports the enhanced and sustainable allocation of limited resources for the improvement of safety, environment and economy. The book is of interest to researchers and scientists working in the field of risk...

  12. IEMAE: mathematics & statistics applied to civil engineering & building

    OpenAIRE

    Serrat Piè, Carles

    2009-01-01

    IEMAE (Institut d’Estadística i Matemàtica Aplicada a l’Edificació - Institute of Statistics and Mathematics Applied to the Building Construction) is an academic institution interested in solving Multidisciplinary problems in the civil and building engineering area by using statistics and mathematics disciplines

  13. Identification & Control of Special Processes in Civil Engineering Construction

    Institute of Scientific and Technical Information of China (English)

    张怡

    2009-01-01

    @@ A lot ot special processes exist in operation of construction enterprises. Construction enterprises are categorized as of high risks in certification under the quality management system. Taking civil engineering construction of building projects as an example, the writer analyzes how construction enterprises shall identify and control the special processes.

  14. Developing Research Skills for Civil Engineers: A Library Contribution.

    Science.gov (United States)

    Bruce, C. S.; Brameld, G. H.

    1990-01-01

    A library instruction program has been instituted in civil engineering at the Queensland University of Technology (Australia) in an effort to improve the research skills of fourth year students working on research projects. Students with extended library instruction were found to have better information-seeking behavior than others. (Author/MSE)

  15. Morphological Characteristics of the Language used in Civil Engineering

    Directory of Open Access Journals (Sweden)

    Liliana RICINSCHI

    2014-12-01

    Full Text Available This paper aims at investigating the particular features of civil engineering written discourse. A first assumption is made that the language employed in civil engineering is a subcategory of English for Specific Purposes. As part of ESP, it is thus bound to have a set of specialized lexical and grammatical features which are not in the repertoire of the non-users of that particular domain: complex noun phrases, special use of articles, special use of modal verbs, frequency of the passive voice and of present tense simple, long complex sentences, collocations, specialized terminology. Focus will be laid on demonstrating that the morphological features mentioned above are present in the texts selected for analysis. The texts belong to different domains related to civil engineering, namely steel structures, concrete constructions, building materials and railway systems. Two main morphological categories will be analysed in detail, i.e. the noun and the verb. In the part referring to the nominal component, the noun phrases used in the corpus, the special use of the articles and a process which we consider typical for this type of discourse, i.e. nominalisation, will be investigated. In the section focusing on the verb, the voice, tense, aspect and the values of the modal verbs used in civil engineering texts will be analysed.

  16. The potential of biobased materials in the civil engineering sector

    NARCIS (Netherlands)

    Venema, Anne

    2012-01-01

    SUMMARY Large quantities of materials are used in the Dutch civil engineering sector every year. Many of these materials have a significant impact on the environment because these materials are based on non-renewable resources and the production is often

  17. Evolutionary algorithms and metaheuristics in civil engineering and Construction management

    CERN Document Server

    Greiner, David

    2015-01-01

    This book focuses on civil and structural engineering and construction management applications. The contributions constitute modified, extended and improved versions of research presented at the  minisymposium organized by the editors at the ECCOMAS conference on this topic in Barcelona 2014.

  18. Construction Site Environmental Impact in Civil Engineering Education

    Science.gov (United States)

    Teixeira, Jose M. Cardoso

    2005-01-01

    The environmental impact of construction activity has gained increasing importance in the last few years and become a key subject for civil engineering education. A survey of Portuguese higher education institutions shows that concern with this topic is mostly directed at the impact of large construction projects and especially focused on their…

  19. Predicaments and Expectations of Civil Engineering Education in China.

    Science.gov (United States)

    Liu, Xila; Fang, Dongping

    2002-01-01

    Explains the goals of civil engineering in China which include integrated knowledge structure and multi-level knowledge and abilities of innovation, adaptation, cooperation, communication, and organization. Discusses the challenges of student-centered education, dynamics of education organization, and open education. (Author/YDS)

  20. The potential of biobased materials in the civil engineering sector

    NARCIS (Netherlands)

    Venema, Anne

    2012-01-01

    SUMMARY Large quantities of materials are used in the Dutch civil engineering sector every year. Many of these materials have a significant impact on the environment because these materials are based on non-renewable resources and the production is often

  1. State Space identification of Civil Engineering Structures from Output Measurements

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Andersen, P.

    for identification of civil engineering structures. The SST is compared with the stochastic realization estimator Matrix Block Hankel (MBH) and a prediction error method (PEM). The results show that the investigated techniques give good results in terms of estimated modal parameters and mode shapes. Especially...

  2. State Space identification of Civil Engineering Structures from Output Measurements

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Andersen, P.

    1997-01-01

    for identification of civil engineering structures. The SST is compared with the stochastic realization estimator Matrix Block Hankel (MBH) and a prediction error method (PEM). The results show that the investigated techniques give good results in terms of estimated modal parameters and mode shapes. Especially...

  3. Increase of the contract amounts for LHC civil-engineering construction and civil-engineering consultancy contracts

    CERN Document Server

    2005-01-01

    This document concerns the increase of the contract amounts for LHC civil-engineering construction and civil-engineering consultancy, Package 2. The Finance Committee is invited to take note of the increase of the contract amounts with: - the joint venture DRAGADOS (ES) and SELI (IT) for civil-engineering construction, LHC Package 2, for an amount of 28 087 000 Swiss francs, subject to revision, in the amount previously announced to Finance Committee (CERN/FC/4516) of 132 200 000 Swiss francs, subject to revision, bringing the total to a maximum amount of 160 287 000 Swiss francs, subject to revision. - the joint venture GIBB (GB), GEOCONSULT (AT) and SGI (CH) for the provision of civil-engineering consultancy services, LHC Package 2, for an amount of 900 000 Swiss francs, subject to revision, in the amount previously announced to Finance Committee of 13 800 000 Swiss francs, subject to revision, bringing the total to a maximum amount of 14 700 000 Swiss francs, subject to revision

  4. Studying civil engineering alumni from a Mexican university

    Directory of Open Access Journals (Sweden)

    Rómel G Solís Carcaño

    2010-04-01

    Full Text Available The present study was aimed at knowing the opinion of graduates from a Mexican university’s Civil Engineering department about several aspects related to their first years as professionals. The study explored aspects such as graduation index, the difficulty of inserting themselves into the labour market, their opinion about the civil engi- neering programme and their interest in continuing their studies. A questionnaire was prepared for gathering the information based on various international, national and local criteria. The results revealed that the graduates had experienced little difficulty in becoming inserting into the local labour market; however, their professional performance had not been as satisfactory as they had expected.

  5. M.Sc. in Civil and Structural Engineering

    DEFF Research Database (Denmark)

    Clausen, Johan Christian

    The following pages contain a list of project ideas proposed by the scientific staff at the Department of Civil Engineering, Aalborg University, and a number of companies. Most of the project ideas in this catalogue may form the basis for long and short master projects as well as regular 3rd...... semester projects at the M.Sc. programme in Civil and Structural Engineering. Each project description provides a brief overview of the purpose as well as the main activities. Further, a weighting between theoretical analysis, experimental work and computer modelling has been proposed. Usually...... page. Furthermore, other ideas for projects may be discussed with a potential supervisor. Many private engineering companies have a homepage on which they state that they would like to collaborate with students on a master project....

  6. A Study of the Relationship Between the Practice of Civil Engineering and Student Courses: Volume 1.

    Science.gov (United States)

    Bull, A. J. U.; Richardson, E.

    Australian civil engineers were surveyed for a study intended to establish a model for development based on a list of the basic stock of knowledge and techniques that need to be mastered by the graduate civil engineer. Following a brief introduction and summary, chapters 3-7 review the survey objectives, civil engineering definitions and…

  7. The Challenges of LHC Civil Engineering

    CERN Multimedia

    CERN-ETT-EC-MM Team

    2003-01-01

    A mosaic of works, structures and workers of differents crafts and origins. Three consulting consortia for the engineering and the follow-up of the works. Four industrial consortia for doing the job. A young team of 25 CERN staff, 30 surface buildings, 32 caverns of all sizes, 170 000 m3 of concrete, 420 000 m3 excavated.1998-2004 : six years of work and 340 millions Swiss Francs.

  8. Civil Engineering in the ATLAS cavern

    CERN Multimedia

    Laurent Guiraud

    2000-01-01

    Ghostly figures can be seen wandering the cavern that will eventually house the ATLAS experiment, part of the LHC at CERN. Quite fitting since the detector will hunt the illusive 'ghostly' particles, such as the Higgs boson and dark matter. These engineers are excavating the huge cavern that has to be anchored from above as the detector will fill so much space that there is no room for support pillars.

  9. FOREWORD: Cultural heritage and civil engineering Cultural heritage and civil engineering

    Science.gov (United States)

    Masini, Nicola; Soldovieri, Francesco; Alvarez de Buergo, Monica; Dumoulin, Jean

    2012-08-01

    This special issue of Journal of Geophysics and Engineering offers a diverse panorama of approaches and technologies that aim to characterize and analyse the state of conservation and health of cultural heritage and civil infrastructure. In particular, it provides a significant overview not only of the effectiveness but also of the limitations of single diagnostic techniques, which can be overcome through the integration of different methods and technologies and/or the use of robust and novel data processing techniques. The choice of diagnostic strategy depends on the material (concrete, masonry), the spatial characteristics of the objects or sites, the value of the objects to be investigated (cultural or not), the aim of the investigation (knowledge, conservation, restoration) and the issues to be addressed (monitoring, decay assessment, etc). The paper by Fornaro et al reports an important technological advance in the field of slow deformation monitoring of civil infrastructure by means of differential interferometric synthetic aperture radar (SAR) from satellite platforms. The paper shows how the joint exploitation of the last generation of X-band SAR sensors, such as TerraSAR-X, and novel tomographic approaches makes possible advanced multi-dimensional imaging of real structures such as the Las Vegas Monorail. Within the same SAR-based applications, Tapete et al tested the capability of persistent scatterer interferometry (PSI) techniques in the preventative diagnosis of deformation threatening the structural stability of archaeological monuments and buried structures in the Roman Forum, Palatino Hill and Oppio Hill in the centre of Rome. A PSInSAR processing approach, based on the use of the SqueeSAR algorithm, has been shown to be highly suitable for retrieving not only information about displacements of the archaeological remains, but also evidence of criticalities affecting partially or totally buried structures, such as those discovered at Nero's Golden

  10. Georadar technique application to the civil engineering; Aplicacion de la tecnica georradar a la ingenieria civil

    Energy Technology Data Exchange (ETDEWEB)

    Jimenez Sanchez, J.; Diaz Medina, F. J.

    2000-07-01

    The georadar technique or GPR (Ground Penetrating Radar) has been gone developing and employing since fifties in superficial investigations of high resolution of the underground or of certain subjects in Geology, Mining and Glaciology. From seventies, this technic begins to appear in the environment of the Civil Engineering. This method, not destructive reproduces in a better way the possible problems to resolve, even the first 40 m-50 m of depth, that any another geophysical technique. (Author)

  11. Supportive Organisational Cultures and their effects on Male Civil Engineers

    Directory of Open Access Journals (Sweden)

    Valarie Francis

    2012-11-01

    Full Text Available Substantial changes, not only in the demographic composition of the Australian workforce, but also,in the roles and expectations of men and women, have led to organisational and employee attempts to reconcile work and non-work demands. Research suggests that when work-family balance practices are introduced they can greatly enhance organisational efficency. However factors embedded in the organisational culture can undermine these policies rendering them ineffective. This quantitative study examined the relationship between the perceptions of a supportive work culture and some work and non-work experiences of Australian male civil engineers. The research investigated the prevalence of organisational values supportive of work-life balances as well as the level of work-family conflict perceived by those engineers. This paper reports some initial results of the study. These indicated that male civil engineers experienced moderate levels of work-family conflict but do not perceive their organisations to be very supportive of employee nneeds to balance work and personal life. However those that reported a supportive work environment also reported higher levels of organisational commitment, greater job and life satisfaction as well as lower level of work-family conflict and lower intentions to quit. The implications of the findings for organisations employing civil engineers are discussed.   

  12. Supportive Organisational Cultures and their effects on Male Civil Engineers

    Directory of Open Access Journals (Sweden)

    Valarie Francis

    2012-11-01

    Full Text Available Substantial changes, not only in the demographic composition of the Australian workforce, but also,in the roles and expectations of men and women, have led to organisational and employee attempts to reconcile work and non-work demands. Research suggests that when work-family balance practices are introduced they can greatly enhance organisational efficency. However factors embedded in the organisational culture can undermine these policies rendering them ineffective. This quantitative study examined the relationship between the perceptions of a supportive work culture and some work and non-work experiences of Australian male civil engineers. The research investigated the prevalence of organisational values supportive of work-life balances as well as the level of work-family conflict perceived by those engineers. This paper reports some initial results of the study. These indicated that male civil engineers experienced moderate levels of work-family conflict but do not perceive their organisations to be very supportive of employee nneeds to balance work and personal life. However those that reported a supportive work environment also reported higher levels of organisational commitment, greater job and life satisfaction as well as lower level of work-family conflict and lower intentions to quit. The implications of the findings for organisations employing civil engineers are discussed.

  13. Information systems for civil engineering; Sistemas de informacion para ingenieria civil

    Energy Technology Data Exchange (ETDEWEB)

    De Buen R, Pablo R; Alvarado G, Alonso; Alaniz Q, Felipe de J; Guerrero F, Vicente A. [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2004-07-01

    Since its beginnings, in the Gerencia de Ingenieria Civil (GIC) of the Instituto de Investigaciones Electricas (IIE) the interest has existed to take advantage of and to promote the advantages that the appropriate use of the computerizing systems in the different tasks of civil engineering in the power sector represent. Either as a part of its infrastructure or at the request of their clients, at the GIC have been developed calculation systems for the analysis and design of special structures such as turbo-generators foundations, poles for transmission and distribution and transmission towers, in addition the information systems for the consultation and the analysis of diverse information, such as the related to the Manuals of Civil Works of the Comision Federal de Electricidad (CFE) or the relative to the existing instruments in the large dams of our country. In this article are briefly described some of the computer systems developed by the GIC in recent years. [Spanish] Desde sus inicios, en la Gerencia de Ingenieria Civil (GIC) del Instituto de Investigaciones Electricas (IIE) ha existido el interes por aprovechar y promover las ventajas que representa el uso adecuado de los sistemas de computo en las diferentes tareas de ingenieria civil en el sector energetico. Ya sea como parte de su infraestructura o a solicitud de sus clientes, en la GIC se han desarrollado sistemas de calculo para el analisis y diseno de estructuras especiales como lo son las cimentaciones de turbogeneradores, los postes para transmision y distribucion y las torres de transmision, ademas de sistemas de informacion para la consulta y el analisis de informacion diversa, como es la relacionada con los manuales de obras civiles de la Comision Federal de Electricidad (CFE) o a la relativa a los instrumentos existentes en las grandes presas de nuestro pais. En este articulo se describen brevemente algunos de los sistemas de computo desarrollos por la GIC en anos recientes.

  14. The multiple intelligences in civil engineering students: an exploratory research

    Directory of Open Access Journals (Sweden)

    Orlando Roque Silva

    2016-11-01

    Full Text Available The profession of Civil Engineer requires beyond what you think of good courses and studies, it requires its employees to act with all the intensity of their intelligence and skills. This study aimed to analyze the profile of Civil Engineering students of a college in the state of São Paulo, and its specific purpose was to identify the logical-mathematical and spatial intelligences among them in their respective semesters. Therefore chose to research qualitative and inductive nature and exploratory. It was applied in the classroom a semi-structured questionnaire where your respondents were students enrolled from first to tenth semester during the second half of 2015, and this sample was separated randomly 20% of its total. The results showed that the profile of these students still needs to be worked professionally since the requirement lies with calculations and space notions.

  15. LHC Civil Engineering Construction Contracts Cost Monitoring and Budget Forecasting

    CERN Document Server

    Skelton, K

    2000-01-01

    The Civil Engineering project for the LHC is estimated at 350 MCHF, of which about 316 MCHF is for the construction contracts. These contracts are based on a system of remeasurement whereby the consultant estimates the quantities required for the construction of each structure and the contractor commits himself to the unit price, which define the initial tender price. There are many factors that affect the final price for these contracts, from increases or decreases in quantities of the estimated amounts in the original bill of quantities to variations to the contract. This paper will look at how these factors change costs at the individual level of a structure to the overall costs of the contract. It will look at how the Civil Engineering Group monitors these changes to calculate cash flows and final costs and how this information is used as a basis for budget forecasts.

  16. Outsourced design services lessons learned from LHC civil engineering

    CERN Document Server

    Watson, T

    2003-01-01

    In April 1996 CERN awarded three contracts for the provision of civil engineering design and site supervision services associated with the LHC Project. These three contracts with an average value at signature of 12MCHF were placed using the “two envelope” award system. Eight firms from six member states were integrated into three Joint Ventures. For Projects prior to the LHC, CERN would have carried out the design and supervision using in-house staff. The change to out-sourced services represented a major step for CERN. After seven years, the contracts are now coming to their conclusion. This paper aims to discuss the reasons why these contracts were originally implemented, the lessons than have been learnt over the last seven years and conclusions on how CERN could approach the need for civil engineering design services in the future.

  17. Contract Management of LHC Civil Engineering at Point 5

    CERN Document Server

    Osborne, J A

    1999-01-01

    Civil engineering work commenced in August 1998 at LEP Point 5 for the underground and surface works necessary to accommodate the CMS detector for the LHC project. The principal underground works consist of two parallel caverns, separated by a support pillar, two new shafts, a number of smaller connection and service galleries and tunnel enlargements on the existing LEP tunnel. The surface works consist of the 140 m long SX building for the detector assembly and numerous other steel and concrete structures necessary for the installation and operation of CMS. The civil engineering design and supervision has been awarded to a joint venture of Gibb (UK), SGI (Switzerland) and Geoconsult (Austria), and the contracting to a joint venture of Dragados (Spain) and Seli (Italy) for 112 MCHF. The aim of this paper is to discuss the management of this contract and in particular how the various parties interact in order to work most efficiently.

  18. Organization and management of the LHC civil-engineering contracts

    CERN Document Server

    Watson, T

    1999-01-01

    Since July 1994, the CERN Civil Engineering group within the ST division has been preparing and engaging contracts related to the Large Hadron Collider (LHC) project. Several of these contracts have values in excess of 10 MCHF and will be executed over a number of years; as such they represent an important part of the infrastructure works required for the LHC. To date, in excess of two hundred and fifty companies have been consulted in relation to these contracts. Contracts or orders have been placed with over thirty companies or joint ventures of companies from nearly all the CERN Member States. This paper aims to show the inter-relationships between these contracts and how the Civil Engineering group is carrying out the management of these important LHC contracts. The organization of the group will be explained along with the roles of individual members within the group.

  19. State Space identification of Civil Engineering Structures from Output Measurements

    OpenAIRE

    1996-01-01

    This paper presents the results from a state space system identification simulation study of a 5-degrees-of freedom system driven by white noise. The aim of the study is to compare the durability of the fairly new Stochastic Subspace Technique (SST) with more well-known techniques for identification of civil engineering structures. The SST is compared with the stochastic realization estimator Matrix Block Hankel (MBH) and a prediction error method (PEM). The results show that the investigated...

  20. Building Management and ICT Learning in Civil Engineering Education

    DEFF Research Database (Denmark)

    Christiansson, Per Lennart

    2005-01-01

    The paper presents structures of the learning domains of building informatics exemplified with experiences from building management civil engineering and open education in Industrial IT at Aalborg University. The courses cover areas such as; object oriented programming and relational database...... of ICT in construction courses are reported with particular emphasis on the Aalborg University Project Oriented Problem Based learning model, PPBL. Experiences from present and possible future use of virtual learning spaces and ICT tools to support teaching, learning, and (meta) information handling...

  1. Air Force Civil Engineer, Volume 11, Number 2, Summer 2003

    Science.gov (United States)

    2003-01-01

    which we pride ourselves, and it has been a truly rewarding tour to witness the bottomless potential of our troops fully realized.� Meeting the...and SMSgt James Ferrell were in charge of the excavation phase of the project. They requested every shop in the 384th ECES offer up troops to help run...and Marketing Office. CMSgt Glenn Deese is the opera- tions manager for the Civil Engineer Maintenance, Inspection and Repair Team, Tyndall AFB, FL

  2. Construction site environmental impact in civil engineering education

    OpenAIRE

    Teixeira, José M. Cardoso

    2005-01-01

    The environmental impact of construction activity has gained increasing importance in the last few years and become a key subject for civil engineering education. A survey of Portuguese higher education institutions shows that concern with this topic is mostly directed at the impact of large construction projects and especially focused on their operational stage. The impact of construction sites of smaller projects in urban areas tends to merit less attention, despite their importance for cit...

  3. Development of Digital Computation of Building and Civil Engineering Quantities

    Directory of Open Access Journals (Sweden)

    Aderinola, O.S

    2014-06-01

    Full Text Available The work of Building and Civil engineering demands a greater knowledge, skill and precision in quantity estimation.The manual method of estimating quantities for building and civil engineering works has posed potential problem areas on work that is undertaken. The low reliability of manual estimation indicates discrepancies in the accuracy of quantities computed manually,hence,the introduction of a digital computation.It is envisaged that this method will greatly reduce the complexities of different aspects when computing quantities for projects, as well as reduce the time to complete the computation and therefore projects can be started earlier.The paper reviewed the procedures involved in the development of a computer program for the digital computation of Building and Civil engineering quantities.The program was developed using Microsoft Visual C SHARP (C# programming language and Microsoft Visual studio. The steps/procedure used in achieving the development of the computer program was (1.designing the application interface,(2 adding controls to the window and (3writing codes behind the interface.The digital computation was tested using a proposed Road project and a proposed administrative buildingand the results showed an average of 100% of the items has 0 to 10 percentage difference for the road and 92% for the building in the final outputs of the quantities obtained through the manual computation and the digital computation and the software could therefore be said to be accurate and reliable.

  4. CDIO Projects in Civil Engineering Study Program at DTU

    DEFF Research Database (Denmark)

    Krogsbøll, Anette; Simonsen, Claus; Christensen, Jørgen Erik

    2011-01-01

    or a design build project on each of the first four semesters. In this paper the four projects in the civil engineering study program are described along with a brief description of the entire study program. The aim is to provide additional information and documentation to accompany an exposition where......In 2008 all Bachelor of engineering study programs at the Technical University of Denmark (DTU) have been adopted to the “Conceive – Design – Implement – Operate” approach. As part of the necessary changes it was decided that all seven study programs should have a cross disciplinary project...... students present their projects. Learning outcomes, training and assessment of personal, professional and social engineering skills are described from a project point of view. Progression of engineering skills is discussed from a study program perspective. The interrelation between the various elements...

  5. CDIO Projects in Civil Engineering Study Program at DTU

    DEFF Research Database (Denmark)

    Krogsbøll, Anette; Simonsen, Claus; Christensen, Jørgen Erik

    2011-01-01

    or a design build project on each of the first four semesters. In this paper the four projects in the civil engineering study program are described along with a brief description of the entire study program. The aim is to provide additional information and documentation to accompany an exposition where......In 2008 all Bachelor of engineering study programs at the Technical University of Denmark (DTU) have been adopted to the “Conceive – Design – Implement – Operate” approach. As part of the necessary changes it was decided that all seven study programs should have a cross disciplinary project...... students present their projects. Learning outcomes, training and assessment of personal, professional and social engineering skills are described from a project point of view. Progression of engineering skills is discussed from a study program perspective. The interrelation between the various elements...

  6. Implementing Systems Engineering in the Civil Engineering Consulting Firm: An Evaluation

    NARCIS (Netherlands)

    de Graaf, Robin S.; Voordijk, Johannes T.; van den Heuvel, Len

    2016-01-01

    This study explores the challenges that civil engineering consulting firms face in their projects when they apply Systems Engineering (SE). It is also explained were these firms should focus when improving the use of SE. To conduct this study, the methodology of Eisenhardt (Building theories from

  7. Engineering

    National Research Council Canada - National Science Library

    Includes papers in the following fields: Aerospace Engineering, Agricultural Engineering, Chemical Engineering, Civil Engineering, Electrical Engineering, Environmental Engineering, Industrial Engineering, Materials Engineering, Mechanical...

  8. Ecological engineering. Bridging between ecology and civil engineering

    Energy Technology Data Exchange (ETDEWEB)

    Van Bohemen, H. (ed.)

    2005-07-01

    On the potential role of ecological technology as a bridge towards a sustainable development of infrastructure. The book reviews the input of (landscape) ecology to solve environmental problems due to human activity. Theories about ecological engineering as well as case studies show the magnificent opportunities to integrate human activities in the biosphere.

  9. Image processing for safety assessment in civil engineering.

    Science.gov (United States)

    Ferrer, Belen; Pomares, Juan C; Irles, Ramon; Espinosa, Julian; Mas, David

    2013-06-20

    Behavior analysis of construction safety systems is of fundamental importance to avoid accidental injuries. Traditionally, measurements of dynamic actions in civil engineering have been done through accelerometers, but high-speed cameras and image processing techniques can play an important role in this area. Here, we propose using morphological image filtering and Hough transform on high-speed video sequence as tools for dynamic measurements on that field. The presented method is applied to obtain the trajectory and acceleration of a cylindrical ballast falling from a building and trapped by a thread net. Results show that safety recommendations given in construction codes can be potentially dangerous for workers.

  10. A Case Study: Problem-Based Learning for Civil Engineering Students in Transportation Courses

    Science.gov (United States)

    Ahern, A. A.

    2010-01-01

    This paper describes two case studies where problem-based learning (PBL) has been introduced to undergraduate civil engineering students in University College Dublin. PBL has recently been put in place in the penultimate and final year transport engineering classes in the civil engineering degree in University College Dublin. In this case study,…

  11. Estimating Modal Parameters of Civil Engineering Structures subject to Ambient and Harmonic Excitation

    DEFF Research Database (Denmark)

    Andersen, Palle; Brincker, Rune; Ventura, Carlos

    In this paper addresses the problems of separating structural modes and harmonics arising from sinusoidal excitation. Though the problem is mostly know in mechanical engineering applications such as rotating machinery, some civil engineering applications experiences the same challenges. A robust...... and fast harmonic detection procedure is presented and illustrated on a civil engineering case....

  12. Civil/structural engineering education in the Faculty for the Built Environment : looking ahead

    OpenAIRE

    Torpiano, Alex; Sustainable Development - Civil Engineering and the Built Environment

    2011-01-01

    The Faculty for the Built Environment of the University of Malta is currently changing its civil/structural engineering degree programmes. This paper explores the background, in the context of the history of the professions of architects and civil engineers in Malta, and of recent developments in the teaching of civil and structural engineering in the University. The paper explains the rationale behind the proposed changes, and outlines the new course structure which has been l...

  13. Disciplinary Influences on the Professional Identity of Civil Engineering Students: Starting the Conversation

    OpenAIRE

    Groen, CJ; Simmons, DR; McNair, LD

    2016-01-01

    As the discipline of civil engineering has evolved from an apprentice-based trade to a socially-engaged profession, the role of the civil engineer has responded to shifts within the ever-changing culture of society. These shifts and historical events have directly influenced what is considered to be valued civil engineering knowledge, behaviors, and practices that we teach to students during their undergraduate careers. As part of a larger grounded theory study that is currently being conduct...

  14. Multi-hazard approaches to civil infrastructure engineering

    CERN Document Server

    LaFave, James

    2016-01-01

    This collection focuses on the development of novel approaches to address one of the most pressing challenges of civil engineering, namely the mitigation of natural hazards. Numerous engineering books to date have focused on, and illustrate considerable progress toward, mitigation of individual hazards (earthquakes, wind, and so forth.). The current volume addresses concerns related to overall safety, sustainability and resilience of the built environment when subject to multiple hazards: natural disaster events that are concurrent and either correlated (e.g., wind and surge); uncorrelated (e.g., earthquake and flood); cascading (e.g., fire following earthquake); or uncorrelated and occurring at different times (e.g., wind and earthquake). The authors examine a range of specific topics including methodologies for vulnerability assessment of structures, new techniques to reduce the system demands through control systems; instrumentation, monitoring and condition assessment of structures and foundations; new te...

  15. Geophysical Methods for Non-Destructive Testing in Civil Engineering

    Science.gov (United States)

    Niederleithinger, E.

    2013-12-01

    Many non-destructive testing (NDT) methods for civil engineering (e. g. ultrasonics, radar) are similar to geophysical techniques. They just differ in scale, material under investigation and vocabulary used. In spite of the fact that the same principles of physics and mathematics apply to both fields, exchange has been limited in the past. But since a few years more and more geophysical knowledge is used in civil engineering. One of the focal points in research is to improve ultrasonic testing of concrete to be able to image the inside even of large, complex structures and to detect any deterioration as early as possible. One of the main issues is the heterogeneity of concrete, including aggregates, reinforcement, cracks and many other features. Our current research focuses on three points. One is the application of state of the art geophysical migration techniques as Reverse Time Migration (RTM) to image vertical faces or the backside of voids and ducts in thick concrete structures, which isn't possible with conventional techniques used in NDT. Second, we have started to use seismic interferometric techniques to interpolate ultrasonic traces, which can't be measured directly for technical reasons. Third, we are using coda wave interferometry to detect concrete degradation due to load, fatigue, temperature or other influences as early as possible. Practical examples of the application of these techniques are given and potential future research directions will be discussed. It will be shown, how a subset of these techniques can be used for innovative monitoring systems for civil infrastructure. Imaging the interior of a concrete body by ultrasonics and reverse time migration(simulated data).

  16. Civil engineering status report for the ATLAS & CMS worksites

    CERN Document Server

    Rammer, H; CERN. Geneva. ST Division

    2003-01-01

    Construction work on the civil engineering contracts at Point 1 and Point 5 started in 1998. The new surface buildings and underground structures are necessary to accommodate the ATLAS and CMS detectors for the LHC Project. The principal underground works at both points consist of two new shafts, two caverns along with a number of small connection tunnels and galleries. At Point 1, the works are 90% complete. Most of the surface buildings as well as the shafts and one of the two new caverns have been completed, and the construction of the second cavern is well underway. At Point 5, the works are 70% complete. Most of the surface buildings as well as the shafts and the pillar have been completed. With excavation of the two large caverns complete, the concreting of the final linings has started. The aim of this paper is to present the status of the civil engineering on these worksites and in particular the challenges encountered constructing the experimental caverns.

  17. Measurement quality and uncertainty evaluation in civil engineering research

    Directory of Open Access Journals (Sweden)

    Silva Ribeiro A.

    2013-01-01

    Full Text Available Civil engineering is a branch of science that covers a broad range of areas where experimental procedures often plays an important role. The research in this field is usually supported by experimental structures able to test physical and mathematical models and to provide measurement results with acceptable accuracy. To assure measurement quality, a metrology probabilistic approach can provide valuable mathematical and computational tools especially suited to the study, evaluation and improvement of measurement processes in its different components (modeling, instrumentation performance, data processing, data validation and traceability, emphasizing measurement uncertainty evaluation as a tool to the analysis of results and to promote the quality and capacity associated with decision-making. This paper presents some of the research held by the metrology division of the Portuguese civil engineering research institutes, focused on the contribution of measurement uncertainty studies to a variety of frameworks, such as testing for metrological characterization and physical and mathematical modeling. Experimental data will be used to illustrate practical cases.

  18. A TOTAL QUALITY MANAGEMENT APPROACH TO CIVIL ENGINEERING CONSULTING

    Directory of Open Access Journals (Sweden)

    G.A.L. Ambrose

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: The article describes the development of a framework for the implementation of a Total Quality Management (TQM approach in the civil consulting industry through the five phases of the typical civil engineering project. For any project to be successful the project team members must take collective and individual responsibility for their role in the project implementation. The organisational goal is “to make money now and in the future”. To achieve this goal the organization must provide value to its clientele. The clients are searching for the silver bullet; double the performance at half the price. TQM provides a means to achieve this goal.

    AFRIKAANSE OPSOMMING: Die artikel beskryf die ontwikkeling van 'n raamwerk vir die implementering van 'n gehaltebestuurstelsel vir die siviele raadgewende bedryf soos dit deelneem aan die vyf fases van 'n tipiese siviele ingenieursprojek. Vir die suksesvolle afhandeling van 'n projek is dit noodsaaklik dat alle projekspanlede gesamentlik en afsonderlik verantwoordelikheid moet aanvaar vir hulle eie betrokkenheid by die projekimplementering. Die organisasie se oogmerk is om “nou en in die toekoms geld te maak”. Ten einde hierdie oogmerk te bereik moet die organisasie waarde vir sy kliënte bied. 'n Gehaltebestuurstelsel voorsien die gereedskap om hierdie doelwit te bereik.

  19. Applications of distributed fiber Bragg grating sensors in civil engineering

    Science.gov (United States)

    Nellen, Philipp M.; Broennimann, Rolf; Sennhauser, Urs J.; Askins, Charles G.; Putnam, Martin A.

    1995-09-01

    We report on civil engineering applications of wavelength multiplexed optical-fiber Bragg grating arrays produced directly on the draw tower for testing and surveying advanced structures and material like carbon fiber reinforced concrete elements and prestressing tendons. We equipped a 6 m X 0.9 m X 0.5 m concrete cantilever beam reinforced with carbon fiber lamellas with fiber Bragg grating sensors. Static and dynamic strain levels up to 1500 micrometers /m were measured with a Michelson interferometer used as Fourier spectrometer with resolutions of about 10 micrometers /m for all sensors. Comparative measurements with electrical resistance strain gauges were in good agreement with the fiber optic results. We used the fiber sensors in two different arrangements: some Bragg grating array elements measured the local strain while others were configured in an extensometric way to measure moderate strain over 0.1-1 m.

  20. A Strategic Approach for Supporting the Future of Civil Engineering Education in Europe

    Science.gov (United States)

    Angelides, Demos C.; Loukogeorgaki, Eva

    2005-01-01

    A new strategic vision of the extensively debated European higher education is proposed with focus on civil engineering. Civil engineering education for the future is considered with relevance to potential world-wide trends and anticipated societal requirements and, therefore, required employee qualifications of the construction-related providers…

  1. Developing a Dynamics and Vibrations Course for Civil Engineering Students Based on Fundamental-Principles

    Science.gov (United States)

    Barroso, Luciana R.; Morgan, James R.

    2012-01-01

    This paper describes the creation and evolution of an undergraduate dynamics and vibrations course for civil engineering students. Incorporating vibrations into the course allows students to see and study "real" civil engineering applications of the course content. This connection of academic principles to real life situations is in…

  2. What Are the Perceptions of Lecturers towards Using Cooperative Learning in Civil Engineering?

    Science.gov (United States)

    Ahern, Aoife

    2007-01-01

    The objective of the current paper is to examine how group learning and cooperative learning are used in civil engineering courses. The paper defines group learning and cooperative learning in the first section. It is hypothesized that group learning is used in civil engineering courses to build teamwork skills and communication skills among civil…

  3. Are Quantity Surveyors Competent to Value for Civil Engineering Works? Evaluating QSs' Competencies and Militating Factors

    Science.gov (United States)

    Olawumi, Timothy Oluwatosin; Ayegun, Olaleke Amos

    2016-01-01

    The role of the quantity surveyor is one that is often unclear amongst the general public. This study discussed the competencies of the quantity surveyor in measuring and managing civil engineering works and also carrying out the financial management for civil engineering construction projects; also outlined the various competencies and skills…

  4. Identification of Civil Engineering Structures using Multivariate ARMAV and RARMAV Models

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Andersen, P.; Brincker, Rune

    This paper presents how to make system identification of civil engineering structures using multivariate auto-regressive moving-average vector (ARMAV) models. Further, the ARMAV technique is extended to a recursive technique (RARMAV). The ARMAV model is used to identify measured stationary data....... The results show the usefulness of the approaches for identification of civil engineering structures excited by natural excitation...

  5. Structurally embedded fiber Bragg gratings: civil engineering applications

    Science.gov (United States)

    Nellen, Philipp M.; Broennimann, Rolf; Frank, Andreas; Mauron, Pascal; Sennhauser, Urs J.

    1999-12-01

    In civil engineering it is of interest to monitor long-term performance of structures made of new lightweight materials like glass or carbon fiber reinforced polymers (GFRP/CFRP). In contrast to surface applied optical fiber sensors, embedded sensors are expected to be better protected against rough handling and harsh environmental conditions. We report on two recently done fiber optical sensor applications in civil engineering. Both include structurally embedded fiber Bragg grating (BG) arrays but have different demands with respect to their operation. For the first application fiber BGs were embedded in GFRP rockbolts of 3 - 5 m in length either of 3, 8, or 22 mm diameter. The sensor equipped rockbolts are made for distributed measurements of boulder motion during tunnel construction and operation and should withstand strain up to 1.6%. Rockbolt sensors were field tested in a tunnel near Sargans in Switzerland. For a second application fiber BGs were embedded in CFRP wires of 5 mm diameter used for the pre- stressing cables of a 56 m long bridge near Lucerne in Switzerland. The permanent load on the cable corresponds to 0.8% strain. Due to the embedded sensors, strain decay inside the cable anchoring heads could be measured for the first time during loading and operation of the cables. For both applications mechanical and thermal loading tests were performed to assess the function of these new elements. Also, temperature and strain sensitivity were calibrated. Reliability studies with respect to stress transfer, fiber mechanical failure, and wavelength shift caused by thermal BG decay as well as monitoring results of both applications are presented.

  6. Assessing the Use of Failure Case Studies in Civil Engineering Education

    Directory of Open Access Journals (Sweden)

    Elleithy Wael

    2016-01-01

    Full Text Available Civil engineering failures, unfortunately, occur from time to time leading to serious consequences. It is of importance that civil engineering undergraduate students are made aware of cases of failure in the past, and hence, to enhance their ability of identification of potential deficiencies. Investigating past cases of civil engineering failures has been carried out in UNMC for the last five years. The students are required to research, investigate and write essays reporting on these failures, detailing the causes and lessons learned. This study was conducted in order to assess the effectiveness of such approach. The outcomes of this study indicate that the use of civil engineering failure as case studies enhances the students’ educational experiences. In addition to the technical learning benefits from past civil engineering failure case studies, there are also impacts on students’ attitudes which has significant implications in their expected profession.

  7. CIVIL ENGINEER PROFILE: A VIEW FROM HIS GENERIC AND SPECIFIC COMPETENCES

    Directory of Open Access Journals (Sweden)

    Daniela Brenzini

    2012-07-01

    Full Text Available This paper was aimed to determine the presence of generic and specific competences in the profile of civil engineering as a graduate of the Eastern Coast of Lake Campus of the University of Zulia; is part of a larger project. The study was carried out through a descriptive, transectional and field research. The population consisted of 38 companies. We applied a questionnaire with closed questions. The results showed the importance that generic and specific competences present in the profile of Civil Engineer; we investigated the presence of very few powers of this kind in the profile of Civil Engineers under investigation.

  8. Fiber-optic sensor applications in civil and geotechnical engineering

    Science.gov (United States)

    Habel, Wolfgang R.; Krebber, Katerina

    2011-09-01

    Different types of fiber-optic sensors based on glass or polymeric fibers are used to evaluate material behavior or to monitor the integrity and long-term stability of load-bearing structure components. Fiber-optic sensors have been established as a new and innovative measurement technology in very different fields, such as material science, civil engineering, light-weight structures, geotechnical areas as well as chemical and high-voltage substations. Very often, mechanical quantities such as deformation, strain or vibration are requested. However, measurement of chemical quantities in materials and structure components, such as pH value in steel reinforced concrete members also provides information about the integrity of concrete structures. A special fiber-optic chemical sensor for monitoring the alkaline state (pH value) of the cementitious matrix in steel-reinforced concrete structures with the purpose of early detection of corrosion-initiating factors is described. The paper presents the use of several fiber-optic sensor technologies in engineering. One example concerns the use of highly resolving concrete-embeddable fiber Fabry-Perot acoustic emission (AE) sensors for the assessment of the bearing behaviour of large concrete piles in existing foundations or during and after its installation. Another example concerns fiber Bragg grating (FBG) sensors attached to anchor steels (micro piles) to measure the strain distribution in loaded soil anchors. Polymer optical fibers (POF) can be — because of their high elasticity and high ultimate strain — well integrated into textiles to monitor their deformation behaviour. Such "intelligent" textiles are capable of monitoring displacement of soil or slopes, critical mechanical deformation in geotechnical structures (dikes, dams, and embankments) as well as in masonry structures during and after earthquakes.

  9. Civil engineering work to raise the level of Route Goward

    CERN Multimedia

    2013-01-01

    Civil engineering work to raise the level of Route Goward will take place during Long Shutdown 1. The work will begin on 18 March 2013 and is expected to last around 5 months.   Route Goward runs over the top of the PS tunnel and is the only access route to the inside of the ring. The layer of shielding backfill beneath this road is the thinnest anywhere on the PS ring. As the purpose of this shielding is to protect against the ionising radiation emitted by the accelerator when in operation, this road has been classified as a “supervised radiation area” according to radiation protection regulations. This classification was merely a temporary solution and, on the recommendation of the PS Radiation Working Group (PSRWG), the decision has been taken to raise the surface level permanently by around 2 m in order to increase the thickness of the shielding and thus lower the dose rate to that of a non-designated area. As the PS tunnel itself is unable to withstand the weight of t...

  10. Low-grade energy of the ground for civil engineering

    Directory of Open Access Journals (Sweden)

    Potienko Natalia

    2017-01-01

    Full Text Available The article researches issues related to the relevance of applying renewable energy sources for civil engineering. The aim of the work is the study of modern approaches to designing buildings, using low-grade energy of the ground. The research methodology is based on the complex analysis of international design experience and on identifying the strengths and weaknesses of objects that use low-grade heat. We have identified the prospects of applying it for domestic construction practice. The state policy in the field of the efficient use of energy resources has been analyzed, and the vector of energy-saving programs development for the Samara Region has been defined. The research describes the impact of using geothermal energy on the architectural and planning solutions of buildings, as well as the peculiar features of the latter’s design, which are related primarily to the increase of energy efficiency. As a result, in the article a conclusion is made that the objects under investigation may be considered as one of the vectors of sustainable architecture development.

  11. DIAPHANE: muon tomography applied to volcanoes, civil engineering, archaelogy

    Science.gov (United States)

    Marteau, J.; de Bremond d'Ars, J.; Gibert, D.; Jourde, K.; Ianigro, J.-C.; Carlus, B.

    2017-02-01

    Muography techniques applied to geological structures greatly improved in the past ten years. Recent applications demonstrate the interest of the method not only to perform structural imaging but also to monitor the dynamics of inner movements like magma ascent inside volcanoes or density variations in hydrothermal systems. Muography time-resolution has been studied thanks to dedicated experiments, e.g. in a water tower tank. This paper presents the activities of the DIAPHANE collaboration between particle- and geo-physicists and the most recent results obtained in the field of volcanology, with a focus on the main target, the Soufrière of Guadeloupe active volcano. Special emphasis is given on the monitoring of the dome's inner volumes opacity variations, that could be ascribed to the hydrothermal system dynamics (vaporization of inner liquid water in coincidence with the appearance of new fumaroles at the summit). I also briefly present results obtained in the fields of civil engineering (study of urban underground tunnels) and archaelogy (greek tumulus scanning).

  12. Proceedings [of the] 1994 annual conference [of the] Canadian Society for Civil Engineering. Comptes rendus [du] congres annuel 1994 [de la] Societe Canadienne de Genie Civil

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-01

    The first of four volumes of a conference on civil engineering presented papers on hydrotechnical engineering, construction, transportation, cold regions, history, and sustainable development. Separate abstracts have been prepared for 15 papers from the volume.

  13. Reservoir and civil engineering geophysics (CD-Rom); Geophysique de gisement et de genie civil (CD-Rom)

    Energy Technology Data Exchange (ETDEWEB)

    Mari, J.L.; Chapellier, D.

    1999-07-01

    This CD-Rom is a pedagogical tool developed from the book 'field and civil engineering geophysics' (Technip ed., 1998). It presents the geophysical methods (surface and well geophysical surveys, radar surveys and well logging) and their application in the study of oil fields and also in civil engineering. Several cartoons illustrate the principle of methods, their domain of use and their limitations. It covers the following topics: surface seismic surveys (waves propagation, equipments, reflexion and refraction seismic surveys, surface waves); well seismic surveys (operation, data processing, imaging); well logging (acoustic, nuclear,electrical and others, methods of interpretation); radar surveys (principle, surface, wells, possibilities and limitations). (J.S.)

  14. Utilization of electromigration in civil and environmental engineering - Processes, transport rates and matrix changes

    DEFF Research Database (Denmark)

    Ottosen, Lisbeth M.; Christensen, Iben Vernegren; Rörig-Dalgaard, Inge

    2008-01-01

    Electromigration (movement of ions in an applied electric field) is utilized for supply or extraction of ions from various porous materials within both civil and environmental engineering. In civil engineering, most research has been conducted on the removal of chlorides from concrete to hinder...... reinforcement corrosion while in environmental engineering remediation of heavy metal polluted soil is the issue most studied. Never the less, experiments have been conducted with utilization for several other materials and purposes within both engineering fields. Even though there are many topics of common...

  15. Learning by Seeing: The TEMAS Multimedia Learning Objects for Civil Engineers

    Science.gov (United States)

    Cadoni, Ezio; Botturi, Luca; Forni, Daniele

    2008-01-01

    A goal of engineering and architecture bachelor and master's programs is to provide students with practical and technical preparation in the mechanical characterization of materials and structures: future architects and civil engineers should be able to recognize and describe different construction materials and their behavior when used for…

  16. Boundaries - US Army Corps of Engineers - St. Paul District (MVP) Civil Works

    Data.gov (United States)

    Army Corps of Engineers, Department of the Army, Department of Defense — The US Army Corps of Engineers - St. Paul District Civil Works boundary. Boundary is based on 1:24k watershed data and coordination with MVR to determine shared...

  17. Fundamentals of civil engineering an introduction to the ASCE body of knowledge

    CERN Document Server

    McCuen, Richard H; Wong, Melanie K

    2011-01-01

    While the ASCE Body of Knowledge (BOK2) is the codified source for all technical and non-technical information necessary for those seeking to attain licensure in civil engineering, recent graduates have notoriously been lacking in the non-technical aspects even as they excel in the technical. Fundamentals of Civil Engineering: An Introduction to the ASCE Body of Knowledge addresses this shortfall and helps budding engineers develop the knowledge, skills, and attitudes suggested and implied by the BOK2. Written as a resource for all of the non-technical outcomes not specifically covered in the

  18. Applications and issues of GIS as tool for civil engineering modeling

    Science.gov (United States)

    Miles, S.B.; Ho, C.L.

    1999-01-01

    A tool that has proliferated within civil engineering in recent years is geographic information systems (GIS). The goal of a tool is to supplement ability and knowledge that already exists, not to serve as a replacement for that which is lacking. To secure the benefits and avoid misuse of a burgeoning tool, engineers must understand the limitations, alternatives, and context of the tool. The common benefits of using GIS as a supplement to engineering modeling are summarized. Several brief case studies of GIS modeling applications are taken from popular civil engineering literature to demonstrate the wide use and varied implementation of GIS across the discipline. Drawing from the case studies, limitations regarding traditional GIS data models find the implementation of civil engineering models within current GIS are identified and countered by discussing the direction of the next generation of GIS. The paper concludes by highlighting the potential for the misuse of GIS in the context of engineering modeling and suggests that this potential can be reduced through education and awareness. The goal of this paper is to promote awareness of the issues related to GIS-based modeling and to assist in the formulation of questions regarding the application of current GIS. The technology has experienced much publicity of late, with many engineers being perhaps too excited about the usefulness of current GIS. An undoubtedly beneficial side effect of this, however, is that engineers are becoming more aware of GIS and, hopefully, the associated subtleties. Civil engineers must stay informed of GIS issues and progress, but more importantly, civil engineers must inform the GIS community to direct the technology development optimally.

  19. Design of a System for Monitoring Reliability of Structures and Constructions in Civil Engineering

    Directory of Open Access Journals (Sweden)

    Tomislav S. Igić

    2011-07-01

    Full Text Available Monitoring of civil engineering structures and constructions requires techniques which can produce high precision and accuracy, reliable measurements and fast processing speed. The development of information and communication systems as well as of microprocessor controllers has enabled a creation of monitoring systems that can be used for tracking reliability of structures and constructions in civil engineering, with described key features. This paper describes in detail the architecture of the Civil Engineering Structures Reliability Monitoring (CERM system. The system has been designed for the purposes of the Technical Mechanics and Theory of Constructions Department at the Faculty of Civil Engineering and Architecture, University of Nis. Unlike general commercial monitoring systems, the CERM system has been specially designed for the purpose of reliability monitoring, and its potential will be further exploited in this paper. It is based on usage of universal microprocessor controllers Integraf of series 10X, along with specially designed software package. This system provides real time acquisition of measurements for observed civil engineering structures and analysis of received values based on developed mathematical models.

  20. 3rd International Civil and Infrastructure Engineering Conference

    CERN Document Server

    Hamid, Nor; Arshad, Mohd; Arshad, Ahmad; Ridzuan, Ahmad; Awang, Haryati

    2016-01-01

    The special focus of these proceedings is on the areas of infrastructure engineering and sustainability management. They provide detailed information on innovative research developments in construction materials and structures, in addition to a compilation of interdisciplinary findings combining nano-materials and engineering. The coverage of cutting-edge infrastructure and sustainability issues in engineering includes earthquakes, bioremediation, synergistic management, timber engineering, flood management and intelligent transport systems.

  1. Quality Assessment Survey at the School of Civil Engineering at Aalborg University

    DEFF Research Database (Denmark)

    Brohus, Henrik

    2008-01-01

    As part of an improved quality assessment procedure at the School of Civil Engineering at Aalborg University, an online survey has been undertaken among all students. Due to external requirements and a wish for more structured feedback, an online questionnaire was presented to all students under...... the study board of civil engineering. The questionnaire was jointly developed for all study boards at Aalborg University. The questionnaire forms an investigation of students' satisfaction and evaluation of the overall structure of the education including self-reported performance assessment. The paper...

  2. Air Force Civil Engineer, Volume 14, Number 3, 2006

    Science.gov (United States)

    2006-01-01

    Preparatory School. SrA Jeremiah Celis, TSgt Harold Ackett and then-A1C Lee set up the Trimble 5700 Base Station and Trimble Trimark III Radio receiver...U.S. Air Forces in Europe is working dili- gently to ensure that all civil works are completed on time. MSgt John Lasky Air Force Print News...MSgt Harold Hailer, 27th FW EOD Flight Chief. “Capt Evans’ comrades will always remember the big smile he had on his face since setting off his

  3. CHED Events: Philadelphia

    Science.gov (United States)

    Wink, Donald J.

    2008-08-01

    These Division of Chemical Education (CHED) Committee meetings and events are planned for the Fall 2008 ACS Meeting in Philadelphia. Most will take place in the Sheraton Philadelphia City Center Hotel, 17th and Race Streets: This includes the Sunday evening Reception and Social Event; there will be no CHED Banquet.

  4. The Civil Engineering Graduate Program at PUC-Rio: A Brazilian Experience.

    Science.gov (United States)

    Romanel, Celso; Filho, Jose Napoleao

    This document discusses the graduate programs in civil engineering at the Pontifical Catholic University of Rio de Janeiro, Brazil, the oldest Brazilian private university. The report features discussions of faculty member backgrounds, trends in student enrollment, women's participation in the program, degree completion, student origins,…

  5. Information management in civil engineering infrastructural development: with focus on geological and geotechnical information

    NARCIS (Netherlands)

    Tegtmeier, W.; Zlatanova, S.; Van Oosterom, P.J.M.; Hack, H.R.G.K.

    2009-01-01

    In civil engineering infrastructural projects, information exchange and (re-) use in and between involved parties is difficult. This is mainly caused by a lack of information harmonization. Various specialists are working together on the development of an infrastructural project and are all using th

  6. A Delphi Study of Additive Manufacturing Applicability for United States Air Force Civil Engineer Contingency Operations

    Science.gov (United States)

    2015-03-26

    research examines the possibilities for the integration of additive manufacturing (AM) machines in United States Air Force civil engineer (CE...popularity in many applications. One of these developing applications is the use of additive manufacturing machines for the production of supplies in...capability is the inclusion of additive manufacturing (AM) machines in certain CE UTCs. Additive manufacturing is the process of constructing

  7. Outcomes-Based Assessment and Learning: Trialling Change in a Postgraduate Civil Engineering Course

    Science.gov (United States)

    El-Maaddawy, Tamer; Deneen, Christopher

    2017-01-01

    This paper aims to demonstrate how assessment tasks can function within an outcomes-based learning framework to evaluate student attainment of learning outcomes. An outcomes-based learning framework designed to integrate teaching, learning, and assessment activities was developed and implemented in a civil engineering master-level course. The…

  8. CIVIL ENGINEERING TECHNOLOGY CONSULTANTS' WORKSHOP, REPORT OF PROCEEDINGS (ATLANTA, MAY 17-20, 1967).

    Science.gov (United States)

    DOBROVOLNY, JERRY S.

    THIS REPORT ATTEMPTS TO SHOW ADMINISTRATORS OF JUNIOR COLLEGES, TECHNICAL INSTITUTES, AND GOVERNMENT OR INDUSTRIAL TRAINING PROGRAMS CERTAIN CRITICAL PROBLEMS IN THE TRAINING OF CIVIL ENGINEERING TECHNICIANS. THE PHILOSOPHY OF TECHNICAL EDUCATION REQUIRES ATTENTION AS DOES THE IDENTIFICATION OF STUDENTS WHO CAN BENEFIT FROM AND SUCCESSFULLY…

  9. Assessment by Employers of Newly Graduated Civil Engineers from the Islamic University of Gaza

    Science.gov (United States)

    Enshassi, Adnan; Hassouna, Ahmed

    2005-01-01

    The evaluation process is very important to identify and recognize the strengths and the weaknesses of graduated students. The purpose of this paper is to evaluate the performance of the newly graduated civil engineers from the Islamic University of Gaza in Palestine. The methodology was based on questionnaires and informal interview. The…

  10. A comparison of damage detection methods applied to civil engineering structures

    DEFF Research Database (Denmark)

    Gres, Szymon; Andersen, Palle; Johansen, Rasmus Johan

    2017-01-01

    Facilitating detection of early-stage damage is crucial for in-time repairs and cost-optimized maintenance plans of civil engineering structures. Preferably, the damage detection is performed by use of output vibration data, hereby avoiding modal identification of the structure. Most of the work...

  11. Role of geophysical exploration for civil engineering; Doboku chosa ni okeru butsuri tansa no yakuwari

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, S.; Sato, S. [OYO Corp., Tokyo (Japan)

    1997-12-01

    This paper describes the current status of applying geophysical exploration to civil engineering works, application examples of latest geophysical exploration technologies in typical civil engineering fields (dams, tunnels, banks, and civil engineering works in urban areas), and of geophysical exploration technologies specially devised at civil engineering work sites. The applications include utilization in rock classification and weathering division, estimation of grouting effect and its injection scope, determination of loosening as a result of tunnel excavation, utilization of the relationship between S-wave velocity and N-value revealed by the standard penetration test, and tunnel front exploration. A well logging technique utilizing boring holes is available as a latest technology. Tomography technology using elastic waves, specific resistance and radar has its application increased as it is used in dams, tunnels, and foundations of other important structures. Attempts are made on application of explorations using the shallow bed reflection method and three-dimensional exploration method. Frequently used technologies include seismic exploration using the refraction method for dams, high-density electric exploration for tunnels, electric exploration for banking, and PS logging using the suspension method for structure foundations. 30 refs., 13 figs., 5 tabs.

  12. An Assessment of Educational Needs for the Department of Civil and Environmental Engineering.

    Science.gov (United States)

    Eastmond, J. Nicholls, Jr.

    Reported is a needs assessment study designed to determine priority needs for a college Department of Civil and Environmental Engineering for setting objectives and long range planning. Opinions were obtained from students, graduates, faculty, and employers. Each of the groups showed agreement on three priority items: (1) practical managerial…

  13. The Attitude of Civil Engineering Students towards Health and Safety Risk Management: A Case Study

    Science.gov (United States)

    Petersen, A. K.; Reynolds, J. H.; Ng, L. W. T.

    2008-01-01

    The highest rate of accidents and injuries in British industries has been reported by the construction industry during the past decade. Since then stakeholders have recognised that a possible solution would be to inculcate a good attitude towards health and safety risk management in undergraduate civil engineering students and construction…

  14. Free Fall Misconceptions: Results of a Graph Based Pre-Test of Sophomore Civil Engineering Students

    Science.gov (United States)

    Montecinos, Alicia M.

    2014-01-01

    A partially unusual behaviour was found among 14 sophomore students of civil engineering who took a pre test for a free fall laboratory session, in the context of a general mechanics course. An analysis contemplating mathematics models and physics models consistency was made. In all cases, the students presented evidence favoring a correct free…

  15. A Sustainable Cohort of Professional Civil Engineering Graduates? Uncovering the United Kingdom Graduate Crisis

    Science.gov (United States)

    Edwards, David J.; Dainty, Andrew R. J.; Love, Peter E. D.

    2004-01-01

    Undergraduate applications to civil engineering courses have been declining at an alarming rate despite the industry's healthy economic activity. Concerns abound as to the long-term impact of this decline as the sector is already suffering skills shortages across virtually all of its occupations. This paper investigates the likely future trends in…

  16. Case Study of a Project-Based Learning Course in Civil Engineering Design

    Science.gov (United States)

    Gavin, K.

    2011-01-01

    This paper describes the use of project-based learning to teach design skills to civil engineering students at University College Dublin (UCD). The paper first considers the development of problem-based leaning (PBL) as a tool in higher education. The general issues to be considered in the design of the curriculum for a PBL module are reviewed.…

  17. Vibration-based localisation of structural deterioration in frame-like civil engineering structures

    DEFF Research Database (Denmark)

    Ulriksen, Martin Dalgaard; Damkilde, Lars

    2016-01-01

    With the existing trend of minimising material use in typical frame-like civil engineering structures, such as buildings, bridges, and offshore platforms, these structures will typically be subjected to substantial wind induced vibrations. Besides being a source of disturbance for the occupants...

  18. On the Uncertainty of Identification of Civil Engineering Structures Using ARMA Models

    DEFF Research Database (Denmark)

    Andersen, Palle; Brincker, Rune; Kirkegaard, Poul Henning

    1995-01-01

    In this paper the uncertainties of modal parameters estimated using ARMA models for identification of civil engineering structures are investigated. How to initialize the predictor part of a Gauss-Newton optimization algorithm is put in focus. A backward-forecasting procedure for initialization...

  19. The Attitude of Civil Engineering Students towards Health and Safety Risk Management: A Case Study

    Science.gov (United States)

    Petersen, A. K.; Reynolds, J. H.; Ng, L. W. T.

    2008-01-01

    The highest rate of accidents and injuries in British industries has been reported by the construction industry during the past decade. Since then stakeholders have recognised that a possible solution would be to inculcate a good attitude towards health and safety risk management in undergraduate civil engineering students and construction…

  20. Virtual Placements to Develop Employability Skills for Civil and Environmental Engineering Students

    Science.gov (United States)

    Paul, Parneet

    2015-01-01

    This project work addresses the crucial need to encourage undergraduate civil and environmental engineering students to gain employment skills and training right from the start of their studies so that their overall employability increases; their confidence level in networking with industry and within the workplace increases; and so that they are…

  1. Identification of Time Varying Civil Engineering Structures using Multivariate Recursive Time Domain Models

    DEFF Research Database (Denmark)

    Andersen, P.; Skjærbæk, P. S.; Kirkegaard, Poul Henning

    with the smoothed quanties which have been obtained from SARCOF. The results show the usefulness of the technique for identification of a time varying civil engineering structure. It is found that all the techniques give reliable estiates of the frequencies of the two lowest modes and the first mode shape. Only...

  2. Use of Statistical Information for Damage Assessment of Civil Engineering Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Andersen, P.

    This paper considers the problem of damage assessment of civil engineering structures using statistical information. The aim of the paper is to review how researchers recently have tried to solve the problem. It is pointed out that the problem consists of not only how to use the statistical...

  3. Report for Working Group 1: Design Research in Civil and Environmental Engineering

    DEFF Research Database (Denmark)

    2013-01-01

    The first 2013 DCEE working group meeting focused on issues associated with design research in civil and environmental engineering. It addressed some of the motivation for establishing design as a research discipline in CEE and some of the challenges and outstanding questions about how to do so....

  4. Optimal Design of Experiments for Parametric Identification of Civil Engineering Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning

    Optimal Systems of experiments for parametric identification of civil engineering structures is investigated. Design of experiments for parametric identification of dynamic systems is usually done by minimizing a scalar measure, e.g the determinant, the trace ect., of an estimated parameter...

  5. Vibration Based Damage Assessment of a Civil Engineering Structures using a Neural Networks

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Rytter, A.

    In this paper the possibility of using a Multilayer Perceptron (MLP) network trained with the Backpropagation Algorith as a non-destructive damage assessment technique to locate and quantify a damage in Civil Engineering structures is investigated. Since artificial neural networks are proving...

  6. On the Uncertainty of Identification of Civil Engineering Structures using ARMA Models

    DEFF Research Database (Denmark)

    Andersen, P.; Brincker, Rune; Kirkegaard, Poul Henning

    In this paper the uncertainties of modal parameters estimated using ARMA models for identification of civil engineering structures are investigated. How to initialize the predictor part of a Gauss-Newton optimization algorithm is put in focus. A backward-forecasting procedure for initialization...

  7. Vibration-based localisation of structural deterioration in frame-like civil engineering structures

    DEFF Research Database (Denmark)

    Ulriksen, Martin Dalgaard; Damkilde, Lars

    2016-01-01

    With the existing trend of minimising material use in typical frame-like civil engineering structures, such as buildings, bridges, and offshore platforms, these structures will typically be subjected to substantial wind induced vibrations. Besides being a source of disturbance for the occupants...

  8. An analysis of Educational Guidance in Training of civil Engineering

    Directory of Open Access Journals (Sweden)

    Ibette Alfonso Pérez

    2013-06-01

    Full Text Available The work shows an analysis of educational guidance realized by the first year of Civil Engineeringcareer in Cujae. The authors expose basics ideas in relation with the study of literature related to thistopic, for establish specific ideas of university educational guidance. Besides, this work presents theanalysis of educational guidance received by two groups of students of first year during a course2010-2011. It´s employed reflective and open techniques since an interpretive perspective andpredominantly qualitative methodological framework. We have concluded that not enough educationalguidance realized by students during training process, because it´s essential to increase the quantityof actions for guidance and to get these ones integrate the substantive university processes. In thismanner, the teachers can guide the student in your satisfactory transit for the university.

  9. Proceedings [of the] 1994 annual conference [of the] Canadian Society for Civil Engineering. Comptes rendus [du] congres annuel 1994 [de la] Societe Canadienne de Genie Civil

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-01

    The third of four volumes of a conference on civil engineering presented papers on environmental engineering, including water and wastewater treatment, water quality management, solid and liquid waste treatment, non-point source pollution and hydraulics, urban drainage problems, and soil and groundwater contamination. Separate abstracts have been prepared for 6 papers from the volume.

  10. [Civil engineering education at the Imperial College of Engineering in Tokyo: an analysis based on Ayahiko Ishibashi's memoirs].

    Science.gov (United States)

    Wada, Masanori

    2014-01-01

    The Imperial College of Engineering (ICE or Kobu-Daigakko) in Tokyo, founded in 1873 under the auspices of the Ministry of Public Works, was one of the most prominent modern institutions of engineering education in early Meiji Japan. Previous studies have revealed that the ICE offered large scale practical training programs at enterprises of the Ministry, which sometimes lasted several months, and praised their ideal combination of theory and practice. In reality, it has been difficult to evaluate the quality of education at the ICE mainly because of scarcity of sources. ICE students published a collection of memoirs for alumni members, commemorating the fiftieth-year of the history of the Tokyo Imperial University. Drawing on the previously neglected collection of students' memoires, this paper appraises the education of civil engineering offered by the ICE. The paper also compares this collection with other official records of the college, and confirms it as a reliable source, even though it contains some minor errors. The author particularly uses the memoirs by Ayahiko Ishibashi, one of the first graduates from its civil engineering course, who left sufficient reminiscences on education that he received. This paper, as a result, illustrates that the main practical training for the students of civil engineering was limited to designing process, including surveying. Furthermore, practical training that Ishibashi received at those enterprises often lacked a plan, and its effectiveness was questionable.

  11. How Can Air Force Civil Engineers Use Expert Systems?

    Science.gov (United States)

    1988-09-01

    knowledge base is a database or static data plus relational information. The inference engine actually manipulates the knowledge base using analyses...soil permeability, soil stratification, groundwater flow, and gradient. The system produces a HRS score for site permeability and groundwater flow...solutions?have tedded befor? bein lot __ _ _ _ AND) __ __ OR ) _ __ __ AND] 2. Isthetaskina 5. Istoexperise [9. Are xperts better volatile knowledge

  12. Linking Civil Engineering Education And Research With Industry (Session Keynote)

    DEFF Research Database (Denmark)

    Virdi, Kuldeep

    Linking engineering education with industry has been a basic aim of educators almost from the beginning of modern degree programmes. In the USA, reference is often made to ‘co-operative education’, where students spend periods in industry within the duration of their stay in a university. Indeed...

  13. Linking Civil Engineering Education And Research With Industry (Session Keynote)

    DEFF Research Database (Denmark)

    Virdi, Kuldeep

    Linking engineering education with industry has been a basic aim of educators almost from the beginning of modern degree programmes. In the USA, reference is often made to ‘co-operative education’, where students spend periods in industry within the duration of their stay in a university. Indeed...

  14. Identification of Civil Engineering Structures using Vector ARMA Models

    DEFF Research Database (Denmark)

    Andersen, Palle; Brincker, Rune; Kirkegaard, Poul Henning

    1998-01-01

    This paper describes the work which have been carried out in the project B.1: Damage Detection in Structures under Random Loading. The project is a part of the research programme Dynamics of Structures founded by the Danish Technical Research Council. The planned contents of and the requirements ...... Dept. of Building Technology and Structural Engineering, Aalborg University....

  15. Challenges and Opportunities for Establishing Design as a Research Discipline in Civil and Environmental Engineering

    DEFF Research Database (Denmark)

    Thompson, Mary Kathryn

    2013-01-01

    faculty, research and education communities, conferences, and journals. However, design remains an emerging sub-discipline in civil and environmental engineering – practiced, valued, and taught but not subject to rigorous academic research. This paper presents some of the challenges associated...... with the establishment of design as a research discipline within civil and environmental engineering, some of the benefits and opportunities that will come from that establishment, and some evidence for the fact that this process has already begun.......There are a number of fields including architecture, industrial design, and urban planning and design, where design is the discipline upon which all research and teaching activities are based. In other fields such as aerospace and mechanical engineering, design is a sub-discipline with its own...

  16. Proceedings [of the] 1994 annual conference [of the] Canadian Society for Civil Engineering. Comptes rendus [du] congres annuel 1994 [de la] Societe Canadienne de Genie Civil

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-01

    The fourth of four volumes of a conference on civil engineering presented papers on engineering mechanics, including dynamics and vibrations, computational modelling, porous media, geomechanics, fluid mechanics, finite element methods, structural dynamics, mechanics of materials, computer-aided engineering and optimization, boundary element methods, stress analysis, mechanics of composites and damage, and structural stability. Separate abstracts have been prepared for 12 papers from the volume.

  17. Theory and technology of rock excavation for civil engineering

    CERN Document Server

    Zou, Dingxiang

    2017-01-01

    This book summarizes the technical advances in recent decades and the various theories on rock excavation raised by scholars from different countries, including China and Russia. It not only focuses on rock blasting but also illustrates a number of non-blasting methods, such as mechanical excavation in detail. The book consists of 3 parts: Basic Knowledge, Surface Excavation and Underground Excavation. It presents a variety of technical methods and data from diverse sources in the book, making it a valuable theoretical and practical reference resource for engineers, researchers and postgraduates alike.

  18. A new experience: the course of ethics in engineering in the Department of Civil Engineering, University of Granada.

    Science.gov (United States)

    Gil-Martín, Luisa María; Hernández-Montes, Enrique; Segura-Naya, Armando

    2010-06-01

    A course in professional ethics for civil engineers was taught for the first time in Spain during the academic year 2007/08. In this paper a survey on the satisfaction and expectation of the course is presented. Surprisingly the students sought moral and ethical principles for their own ordinary lives as well as for their profession. Students were concerned about the law, but in their actions they were more concerned with their conscience, aware that it can be separate from the law.

  19. Summer Research Program (1992). High School Apprenticeship Program (HSAP) Reports. Volume 16. Arnold Engineering Development Center Civil Engineering Laboratory

    Science.gov (United States)

    1992-12-28

    you again next year. 10-13 CIVIL ENGINEERING LABORATORY A STUDY OF LITTORINA IRRORATA AND ITS ENVIRONMENT Philip C. Dorsch Student Lab Assistant Bay...Research was done on Littorina irrorata to see how they would react to a change In their envmroment. :.ites were selected in ýhe upper inmertldal zone...results from both the natural and artificial environments were compared and !ittlie chanrie was found. 11-2 A STUDY OF LITTORINA IRRORATA AND ITS

  20. Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2006-01-01

    1.1 This practice covers the procedures for computing characteristic values of material properties of polymeric composite materials intended for use in civil engineering structural applications. The characteristic value is a statistically-based material property representing the 80 % lower confidence bound on the 5th-percentile value of a specified population. Characteristic values determined using this standard practice can be used to calculate structural member resistance values in design codes for composite civil engineering structures and for establishing limits upon which qualification and acceptance criteria can be based. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  1. Experience of Use of Knowledge Relative Assessment System for Training in Area of Civil Engineering

    Directory of Open Access Journals (Sweden)

    Romanova Elena

    2017-01-01

    Full Text Available Nowadays E-Learning is becoming more and more relevant in training civil engineers. Electronic resources are used for classroom activities and for independent work. It allows allocating extra time for development of practical skills. Experience of remote knowledge control application in the educational process of Moscow State University of Civil Engineering is presented in the article. The control system is called Knowledge Relative Assessment System using Bekker's method. The following steps of system using are described in detail in the article: loading test material, action of users, protection from wrong acts and calculation of rating. The main merits and demerits from the point of view of teachers and students are listed.

  2. Laser ultrasonics for civil engineering : some applications in development for concrete non destructive testing

    Energy Technology Data Exchange (ETDEWEB)

    Abraham, O; Cottineau, L-M; Durand, O [LCPC, MACS Department, Route de Bouaye, BP4129, 44341 Bouguenais cedex (France); Popovics, J S, E-mail: odile.abraham@lcpc.fr [University of Illinois 205 N. Mathews Ave. MC 250 Urbana IL 61801 (United States)

    2011-01-01

    Non destructive testing of civil engineering infrastructures is becoming of primary importance for their diagnosis, residual time life estimation and/or structural health monitoring. A particularity of civil engineering application is the large size of the survey zones and the expected low cost of inspection. In this context non contact ultrasonics may offer the possibility to built robots that can automatically scan large areas (or eventually be integrated in moving vehicles) to recover mechanical properties of material or to perform imagery for geometrical information recovery. In this paper we present two possible applications of in situ laser ultrasonics : one is the detection of voids in tendon duct with the impact echo method, the other is the use of surface waves to recover mechanical properties of the first centimetres of concrete structures (here after called cover concrete).

  3. Self-Regulated Learning Strategies Applied to Undergraduate, Graduate and Specialization Students from Civil Engineering

    Directory of Open Access Journals (Sweden)

    Jose Carlos Redaelli

    2013-03-01

    Full Text Available The current demand for civil engineering work requires new skills and knowledge and calls for new and effective learning methods. This paper shows self-regulated learning strategies applied to undergraduate, graduate and specialization students from Civil Engineering in a Brazilian University. A Scale of Evaluation of Learning Strategies was administered with a view to identifying students´ cognitive, metacognitive and dysfunctional learning strategies.

  4. Reliability design of mechanical systems a guide for mechanical and civil engineers

    CERN Document Server

    Woo, Seongwoo

    2017-01-01

    This book describes basic reliability concepts – parametric ALT plan, failure mechanism and design, and reliability testing with acceleration factor and sample size equation. A generalized life-stress failure model with a new effort concept has been derived and recommended to calculate the acceleration factor of the mechanical system. The new sample size equation with the acceleration factor has also been derived to carry out the parametric ALT. This new parametric ALT should help a mechanical/civil engineer to uncover the design parameters affecting reliability during the design process of the mechanical system. Consequently, it should help companies to improve product reliability and avoid recalls due to the product/structure failures in the field. As the improper or missing design parameters in the design phase are experimentally identified by this new reliability design method - parametric ALT, the mechanical/civil engineering system might improve in reliability by the increase in lifetime and the reduc...

  5. Airborne remote sensors applied to engineering geology and civil works design investigations

    Science.gov (United States)

    Gelnett, R. H.

    1975-01-01

    The usefulness of various airborne remote sensing systems in the detection and identification of regional and specific geologic structural features that may affect the design and location of engineering structures on major civil works projects is evaluated. The Butler Valley Dam and Blue Lake Project in northern California was selected as a demonstration site. Findings derived from the interpretation of various kinds of imagery used are given.

  6. The Civil Engineer, Winter 00-01, Volume 8, Number 4

    Science.gov (United States)

    2001-01-01

    turned it into a hardened cap over much of the area. “The fire became kind of like a nasty ingrown toenail . It went from being a mild irritant, to being...2001 The CE WInter 00-01 31 Air Force Water, Energy Conservation Efforts Earn Federal Awards Out of crisis came rewards for three of the four Air...extreme drought conditions in the state. Dyess received DoE’s Water Conservation / Beneficial Landscaping Award after civil engineers there helped

  7. Air Force Civil Engineer Center Management of Energy Savings Performance Contracts Needs Improvement

    Science.gov (United States)

    2016-05-04

    generated a database of trained Air Force personnel. Air Force Energy Office officials stated that they did not reach out to DOE-FEMP to track Air Force...completed, and terminated Air Force energy -savings performance-contract projects. The database should include, but not be limited to, appropriate...Force Civil Engineer Center Management of Energy Savings Performance Contracts Needs Improvement M A Y 4 , 2 0 1 6 Report No. DODIG-2016-087 Mission

  8. Chemical characterisation of dredged sediments in relation to their potential use in civil engineering.

    Science.gov (United States)

    Zuliani, Tea; Mladenovič, Ana; Ščančar, Janez; Milačič, Radmila

    2016-04-01

    During capital and/or maintenance dredging operations, large amounts of material are produced. Instead of their discharge, dredged sediments may be a valuable natural resource if not contaminated. One of the possible areas of application is civil engineering. In the present work, the environmental status of seaport dredged sediment was evaluated in order to investigate its potential applicability as a secondary raw material. Sediments were analysed for element concentrations in digested samples, aqueous extracts and fractions from sequential extraction; for fluoride, chloride and sulphate concentrations in aqueous extracts; and for tributyltin (TBT). Granulometric and mineralogical compositions were also analysed. The elemental impact was evaluated by calculation of the enrichment factors. The total element concentrations determined showed moderate contamination of the dredged sediments as was confirmed also by their moderate enrichment factors, presumably as a result of industrial and port activities. Elemental concentrations in the aqueous extract were very low and therefore do not represent any hazard for the environment. The water-soluble element concentrations were under the threshold levels set by the EU Directive on the landfill of waste, on the basis of which the applicability of dredged sediments in civil engineering is evaluated, while the content of chloride and sulphate were above the threshold levels. It was found out that due to the large amounts of sediment available, civil engineering applications such as the construction of embankments and backfilling is the most beneficial recycling solution at present.

  9. Civil engineering at the crossroads in the twenty-first century.

    Science.gov (United States)

    Ramírez, Francisco; Seco, Andres

    2012-12-01

    The twenty-first century presents a major challenge for civil engineering. The magnitude and future importance of some of the problems perceived by society are directly related to the field of the civil engineer, implying an inescapable burden of responsibility for a group whose technical soundness, rational approach and efficiency is highly valued and respected by the citizen. However, the substantial changes in society and in the way it perceives the problems that it considers important call for a thorough review of our structures, both professional and educational; so that our profession, with its undeniable historical prestige, may modernize certain approaches and attitudes in order to continue to be a reliable instrument in the service of society, giving priority from an ethical standpoint to its actions in pursuit of "the public good". It possesses important tools to facilitate this work (new technologies, the development of communications, the transmission of scientific thought.···); but there is nevertheless a need for deep reflection on the very essence of civil engineering: what we want it to be in the future, and the ability and willingness to take the lead at a time when society needs disinterested messages, technically supported, reasonably presented and dispassionately transmitted.

  10. Smart Sensing Technologies for Structural Health Monitoring of Civil Engineering Structures

    Directory of Open Access Journals (Sweden)

    M. Sun

    2010-01-01

    Full Text Available Structural Health Monitoring (SHM aims to develop automated systems for the continuous monitoring, inspection, and damage detection of structures with minimum labour involvement. The first step to set up a SHM system is to incorporate a level of structural sensing capability that is reliable and possesses long term stability. Smart sensing technologies including the applications of fibre optic sensors, piezoelectric sensors, magnetostrictive sensors and self-diagnosing fibre reinforced composites, possess very important capabilities of monitoring various physical or chemical parameters related to the health and therefore, durable service life of structures. In particular, piezoelectric sensors and magnetorestrictive sensors can serve as both sensors and actuators, which make SHM to be an active monitoring system. Thus, smart sensing technologies are now currently available, and can be utilized to the SHM of civil engineering structures. In this paper, the application of smart materials/sensors for the SHM of civil engineering structures is critically reviewed. The major focus is on the evaluations of laboratory and field studies of smart materials/sensors in civil engineering structures.

  11. Numerical Prediction of Differences in Micromechanical Fracture Sequence in Notched and Un-Notched Wires for Civil Engineering Applications

    Directory of Open Access Journals (Sweden)

    Adewole, K.K.

    2014-01-01

    Full Text Available The need to employ simulation-based investigations of fracture of civil engineering structures has been emphasised recently in literature. In this paper, three dimensional finite element simulations revealed that the cup and cone fracture process in channel-shaped notched wire for civil engineering applications begins with a slant fracture at the root of the outer edge of the channel-shaped notch and follows a slant to flat fracture sequence. These results demonstrate that the fracture origin in cup and cone fracture in notched wires for civil engineering applications does not necessarily begin with a flat fracture at the center of the wire and does not necessarily follows the flat to slant fracture sequence or propagation generally reported in literature. These results further demonstrate the need to employ simulation-based methodologies in conjunction with or as an alternative to purely experimental fractographic analysis for an accurate failure analysis of wires used for civil engineering applications.

  12. Defining Gas Turbine Engine Performance Requirements for the Large Civil TiltRotor (LCTR2)

    Science.gov (United States)

    Snyder, Christopher A.

    2013-01-01

    Defining specific engine requirements is a critical part of identifying technologies and operational models for potential future rotary wing vehicles. NASA's Fundamental Aeronautics Program, Subsonic Rotary Wing Project has identified the Large Civil TiltRotor (LCTR) as the configuration to best meet technology goals. This notional vehicle concept has evolved with more clearly defined mission and operational requirements to the LCTR-iteration 2 (LCTR2). This paper reports on efforts to further review and refine the LCTR2 analyses to ascertain specific engine requirements and propulsion sizing criteria. The baseline mission and other design or operational requirements are reviewed. Analysis tools are described to help understand their interactions and underlying assumptions. Various design and operational conditions are presented and explained for their contribution to defining operational and engine requirements. These identified engine requirements are discussed to suggest which are most critical to the engine sizing and operation. The most-critical engine requirements are compared to in-house NASA engine simulations to try to ascertain which operational requirements define engine requirements versus points within the available engine operational capability. Finally, results are summarized with suggestions for future efforts to improve analysis capabilities, and better define and refine mission and operational requirements.

  13. Philadelphia and the Tomato.

    Science.gov (United States)

    Smith, Andrew F.; Kling, Tatiana

    This booklet describes for elementary students the many contributions of people, traveling many places, over many years to bring the tomato to Philadelphia. The booklet includes the following: (1) "Introduction to the Tomato"; (2) "Where Does the Tomato Come From?"; (3) "The Spanish Tomato"; (4) "The Philadelphia…

  14. Exploring Advanced Technology Gas Turbine Engine Design and Performance for the Large Civil Tiltrotor (LCTR)

    Science.gov (United States)

    Snyder, Christopher A.

    2014-01-01

    A Large Civil Tiltrotor (LCTR) conceptual design was developed as part of the NASA Heavy Lift Rotorcraft Systems Investigation in order to establish a consistent basis for evaluating the benefits of advanced technology for large tiltrotors. The concept has since evolved into the second-generation LCTR2, designed to carry 90 passengers for 1,000 nautical miles at 300 knots, with vertical takeoff and landing capability. This paper explores gas turbine component performance and cycle parameters to quantify performance gains possible for additional improvements in component and material performance beyond those identified in previous LCTR2 propulsion studies and to identify additional research areas. The vehicle-level characteristics from this advanced technology generation 2 propulsion architecture will help set performance levels as additional propulsion and power systems are conceived to meet ever-increasing requirements for mobility and comfort, while reducing energy use, cost, noise and emissions. The Large Civil Tiltrotor vehicle and mission will be discussed as a starting point for this effort. A few, relevant engine and component technology studies, including previous LCTR2 engine study results will be summarized to help orient the reader on gas turbine engine architecture, performance and limitations. Study assumptions and methodology used to explore engine design and performance, as well as assess vehicle sizing and mission performance will then be discussed. Individual performance for present and advanced engines, as well as engine performance effects on overall vehicle size and mission fuel usage, will be given. All results will be summarized to facilitate understanding the importance and interaction of various component and system performance on overall vehicle characteristics.

  15. Civil engineering: EDF needs for concrete modelling; Genie civile: analyse des besoins EDF en modelisation du comportement des betons

    Energy Technology Data Exchange (ETDEWEB)

    Didry, O.; Gerard, B.; Bui, D. [Electricite de France (EDF), Direction des Etudes et Recherches, 92 - Clamart (France)

    1997-12-31

    Concrete structures which are encountered at EDF, like all civil engineering structures, age. In order to adapt the maintenance conditions of these structures, particularly to extend their service life, and also to prepare constructions of future structures, tools for predicting the behaviour of these structures in their environment should be available. For EDF the technical risks are high and consequently very appropriate R and D actions are required. In this context the Direction des Etudes et Recherches (DER) has developed a methodology for analysing concrete structure behaviour modelling. This approach has several aims: - making a distinction between the problems which refer to the existing models and those which require R and D; - displaying disciplinary links between different problems encountered on EDF structures (non-linear mechanical, chemical - hydraulic - mechanical coupling, etc); - listing of the existing tools and positioning the DER `Aster` finite element code among them. This document is a state of the art of scientific knowledge intended to shed light on the fields in which one should be involved when there is, on one part a strong requirement on the side of structure operators, and on the other one, the present tools do not allow this requirement to be satisfactorily met. The analysis has been done on 12 scientific subjects: 1) Hydration of concrete at early ages: exothermicity, hardening, autogenous shrinkage; 2) Drying and drying shrinkage; 3) Alkali-silica reaction and bulky stage formation; 4) Long term deterioration by leaching; 5) Ionic diffusion and associated attacks: the chlorides case; 6) Permeability / tightness of concrete; 7) Concretes -nonlinear behaviour and cracking (I): contribution of the plasticity models; 8) Concretes - nonlinear behaviour and cracking (II): contribution of the damage models; 9) Concretes - nonlinear behaviour and cracking (III): the contribution of the probabilistic analysis model; 10) Delayed behaviour of

  16. Grouting applications in civil engineering. Volume I and II. [800 references

    Energy Technology Data Exchange (ETDEWEB)

    Einstein, H.H.; Barvenik, M.J.

    1975-01-01

    A comprehensive description of grouting applications in civil engineering is presented that can serve as a basis for the selection of grouting methods in the borehole sealing problem. The breadth and depth of the study was assured by conducting the main part of the review, the collection and evaluation of information, without specifically considering the borehole sealing problem (but naturally incorporating any aspect of civil engineering applications that could be of potential use). Grouting is very much an art and not a science. In most cases, it is a trial and error procedure where an inexpensive method is initially tried and then a more expensive one is used until the desired results are obtained. Once a desired effect is obtained, it is difficult to credit any one procedure with the success because the results are due to the summation of all the methods used. In many cases, the method that proves successful reflects a small abnormality in the ground or structure rather than its overall characteristics. Hence, successful grouting relies heavily on good engineering judgement and experience, and not on a basic set of standard correlations or equations. 800 references. (JRD)

  17. Infrared Emissivity Measurements of Building and Civil Engineering Materials: A New Device for Measuring Emissivity

    Science.gov (United States)

    Monchau, Jean-Pierre; Marchetti, Mario; Ibos, Laurent; Dumoulin, Jean; Feuillet, Vincent; Candau, Yves

    2014-10-01

    The knowledge of the infrared emissivity of materials used in buildings and civil engineering structures is useful for two specific approaches. First, quantitative diagnosis of buildings or civil engineering infrastructures by infrared thermography requires emissivity values in the spectral bandwidth of the camera used for measurements, in order to obtain accurate surface temperatures; for instance, emissivity in the band III domain is required when using cameras with uncooled detectors (such as micro-bolometer arrays). Second, setting up accurate thermal balances by numerical modeling requires the total emissivity value for a large wavelength domain; this is, for instance, the case for computing the road surface temperature to predict ice occurrence. Furthermore, periodical surveys of emissivity variations due to aging or soiling of surfaces could be useful in many situations such as thermal mapping of roads or building insulation diagnosis. The use of portable emissivity measurement devices is required for that purpose. A device using an indirect measurement method was previously developed in our lab; the method uses measurement of the reflectivity from a modulated IR source and requires calibration with a highly reflective surface. However, that device uses a low-frequency, thermal modulation well adapted to laboratory measurements but unfit for fast and in situ measurements. Therefore, a new, portable system which retains the principle of an indirect measurement but uses a faster-frequency, mechanical modulation more appropriate to outdoor measurements was developed. Both devices allow measurements in the broad m to m) and narrow m to m) bands. Experiments were performed on a large number of materials commonly used in buildings and civil engineering structures. The final objective of this work is to build a database of emissivity of these materials. A comparison of laboratory and on-site measurements of emissivity values obtained in both spectral bands will be

  18. On the Uncertainty of Identification of Civil Engineering Structures Using ARMA Models

    DEFF Research Database (Denmark)

    Andersen, Palle; Brincker, Rune; Kirkegaard, Poul Henning

    1995-01-01

    In this paper the uncertainties of modal parameters estimated using ARMA models for identification of civil engineering structures are investigated. How to initialize the predictor part of a Gauss-Newton optimization algorithm is put in focus. A backward-forecasting procedure for initialization...... of the predictor is proposed. This procedure is compared with a standard prediction error method optimization algorithm in a simulation study. It is found that the uncertainties can be reduced by a proper selection of the initial conditions for the predictor....

  19. Design of the Curriculum for a Second-Cycle Course in Civil Engineering in the Context of the Bologna Framework

    Science.gov (United States)

    Gavin, K. G.

    2010-01-01

    This paper describes the design of the curriculum for a Master of Engineering programme in civil engineering at University College Dublin. The revised programme was established to meet the requirements of the Bologna process and this paper specifically considers the design of a new, second-cycle master's component of the programme. In addition to…

  20. AutoCAD Civil 3D在水利工程中的应用%Application of AutoCAD Civil 3D in Hydraulic and hydroelectric Engineering

    Institute of Scientific and Technical Information of China (English)

    于佳

    2015-01-01

    The paper,taking the concrete arch dam which was built in XinJiang as an example ,introduced the application of Civil 3D in aspect of dam model of hydraulic engineering from generating original terrain sur-face,assembly setting of arch dam,dam crest circular arcs lofting,slope excavation,excavation and embank-ment volume engineering quantity calculation etc.its application prospects in hydraulic engineering was sum-marized,which can private reference for hydraulic and hydroelectric engineering designers.%以新疆某混凝土拱坝为例,从地形数据分析、地形曲面创建、定制拱坝体型装配、拱坝路线放样、边坡开挖、挖填方工程量统计等方面介绍了Civil 3D在水利工程中拱坝主体建模方面的应用。总结了AutoCAD Civil 3D在水利工程中的应用前景,可为水利水电工程设计者提供参考。

  1. Extra-curricular methods for improving the quality of the staff training in the university of civil engineering (psychological content

    Directory of Open Access Journals (Sweden)

    Magera Tatiana

    2017-01-01

    Full Text Available High technologies in architecture and construction change the world around. Professional trainings for the creators of the artificial environment (engineers and architects have an effect on people’s life but practically they don’t take into account the human nature of the final user and his own psychological features. In this article there are presented the results of the psychological services in the University of civil engineering from 2006 to 2017 as extra-curricular methods for the general competences formation and development. There are also described the methods of works and their specifics, some difficulties and perspectives. There are explained the reasons for psychological service at the university of civil engineering. There are also taken into account the global risks and dangers affecting the study content of civil engineering.

  2. Operational modal analysis of civil engineering structures an introduction and guide for applications

    CERN Document Server

    Rainieri, Carlo

    2014-01-01

    This book covers all aspects of operational modal analysis for civil engineering, from theoretical background to applications, including measurement hardware, software development, and data processing. In particular, this book provides an extensive description and discussion of OMA methods, their classification and relationship, and advantages and drawbacks. The authors cover both the well-established theoretical background of OMA methods and the most recent developments in the field, providing detailed examples to help the reader better understand the concepts and potentialities of the technique. Additional material is provided (data, software) to help practitioners and students become familiar with OMA. Covering a range of different aspects of OMA, always with the application in mind, the practical perspective adopted in this book makes it ideal for a wide range of readers from researchers to field engineers; graduate and undergraduate students; and technicians interested in structural dynamics, system iden...

  3. Free vibration analysis of civil engineering structures by component-wise models

    Science.gov (United States)

    Carrera, Erasmo; Pagani, Alfonso

    2014-09-01

    Higher-order beam models are used in this paper to carry out free vibration analysis of civil engineering structures. Refined kinematic fields are developed using the Carrera Unified Formulation (CUF), which allows for the implementation of any-order theory without the need for ad hoc formulations. The principle of virtual displacements in conjunction with the finite element method (FEM) is used to formulate stiffness and mass matrices in terms of fundamental nuclei. The nuclei depend neither on the adopted class of beam theory nor on the FEM approximation along the beam axis. This paper focuses on a particular class of CUF models that makes use of Lagrange polynomials to discretize cross-sectional displacement variables. This class of models are referred to as component-wise (CW) in recent works. According to the CW approach, each structural component (e.g. columns, walls, frame members, and floors) can be modeled by means of the same 1D formulation. A number of typical civil engineering structures (e.g. simple beams, arches, truss structures, and complete industrial and civil buildings) are analyzed and CW results are compared to classical beam theories (Euler-Bernoulli and Timoshenko), refined beam models based on Taylor-like expansions of the displacements on the cross-section, and classical solid/shell FEM solutions from the commercial code MSC Nastran. The results highlight the enhanced capabilities of the proposed formulation. It is in fact demonstrated that CW models are able to replicate 3D solid results with very low computational efforts.

  4. Utilization of electromigration in civil and environmental engineering--processes, transport rates and matrix changes.

    Science.gov (United States)

    Ottosen, Lisbeth M; Christensen, Iben V; Rorig-Dalgård, Inge; Jensen, Pernille E; Hansen, Henrik K

    2008-07-01

    Electromigration (movement of ions in an applied electric field) is utilized for supply or extraction of ions from various porous materials within both civil and environmental engineering. In civil engineering, most research has been conducted on the removal of chlorides from concrete to hinder reinforcement corrosion while in environmental engineering remediation of heavy metal polluted soil is the issue most studied. Never the less, experiments have been conducted with utilization for several other materials and purposes within both engineering fields. Even though there are many topics of common interest in the use of electromigration for the two fields, there is no tradition for collaboration. The present paper is a review with the aim of pointing out areas of shared interest. Focus is laid on the purposes of the different processes, transport rates of various ions in different materials and on changes in the matrix itself. Desorption and dissolution of the target elements into ionic form is a key issue to most of the processes, and can be the limiting step. The removal rate is generally below 1 cm day(- 1), but it can be much less than 1 mm day(- 1) when desorption is slow and insufficient. Matrix changes occurs under the action of the applied electric field and it includes both physico-chemical and hydrological changes. Some of the solid phases is weathered and new can be formed. Increased fundamental understanding of the effects and side effects, when applying the electric field to a porous material, can lead to improvement of the known technologies and possibly to new applications.

  5. DEM GPU studies of industrial scale particle simulations for granular flow civil engineering applications

    Science.gov (United States)

    Pizette, Patrick; Govender, Nicolin; Wilke, Daniel N.; Abriak, Nor-Edine

    2017-06-01

    The use of the Discrete Element Method (DEM) for industrial civil engineering industrial applications is currently limited due to the computational demands when large numbers of particles are considered. The graphics processing unit (GPU) with its highly parallelized hardware architecture shows potential to enable solution of civil engineering problems using discrete granular approaches. We demonstrate in this study the pratical utility of a validated GPU-enabled DEM modeling environment to simulate industrial scale granular problems. As illustration, the flow discharge of storage silos using 8 and 17 million particles is considered. DEM simulations have been performed to investigate the influence of particle size (equivalent size for the 20/40-mesh gravel) and induced shear stress for two hopper shapes. The preliminary results indicate that the shape of the hopper significantly influences the discharge rates for the same material. Specifically, this work shows that GPU-enabled DEM modeling environments can model industrial scale problems on a single portable computer within a day for 30 seconds of process time.

  6. Application of fiber optic distributed sensor for strain measurement in civil engineering

    Science.gov (United States)

    Kurashima, Toshio; Usu, Tomonori; Tanaka, Kuniaki; Nobiki, Atsushi; Sato, Masashi; Nakai, Kenji

    1997-11-01

    We report on civil engineering applications of a fiber optic distributed strain sensor. It consists of a sensing fiber and a high performance optical time domain reflectometer (OTDR), for measuring both strain and optical loss distribution along optical fibers by accessing only one end of the fiber. The OTDR can measure distributed strain with an accuracy of better than +/- 60 X 10-6 and a high spatial resolution of up to 1 m over a 10 km long fiber. In model experiments using the OTDR, we measured the strain changes in fibers attached to the surface of a concrete test beam. The performance of the fiber strain sensor was tested by measuring the strain distribution in optical fibers and comparing the results with resistance strain gage measurements for several loads. We found that the two sets of results were similar, and in addition, we demonstrated experimentally that the sensor was able to measure an induced strain change of less than 100 by 10-6, which is nearly the elastic limit of the concrete material. These results show the potential of the OTDR to extend the application of monitoring systems to such areas as large building diagnostics for civil engineering.

  7. Geosynthetics used to stabilize vegetated surfaces for environmental sustainability in civil engineering

    Institute of Scientific and Technical Information of China (English)

    Jie HAN; Jun GUO

    2017-01-01

    Geosynthetics,factory-manufactured polymer materials,have been successfully used to solve many geotechnical problems in civil engineering.Two common applications are earth stabilization and erosion control.Geosynthetics used for earth stabilization include but are not limited to stabilized slopes,walls,embankments,and roads.Geosynthetics used for erosion control are mostly related to slopes,river channels and banks,and pond spillways.To enhance environmental sustainability,vegetation has been increasingly planted on the facing or surfaces of these earth structures.Under such a condition,geosynthetics mainly function as surficial soil stabilization while vegetation provides green appearance and erosion protection of earth surfaces.Recently,geosynthetic or geosynthetic-like material has been used to form green walls outside or inside buildings to enhance sustainability.Geosynthetics and vegetation are often integrated to provide combined benefits.The interaction between geosynthetics and vegetation is important for the sustainability of the earth and building wall surfaces.This paper provides a review of the current practice and research in the geosynthetic stabilization of vegetated earth and building surfaces for environmental sustainability in civil engineering with the emphases on geosynthetic used for erosion protection,geosynthetic-stabilized slopes,geosynthetic-stabilized unpaved shoulders and parking lots,and geosynthetic-stabilized vegetated building surfaces.

  8. A Review of Distributed Optical Fiber Sensors for Civil Engineering Applications

    Directory of Open Access Journals (Sweden)

    António Barrias

    2016-05-01

    Full Text Available The application of structural health monitoring (SHM systems to civil engineering structures has been a developing studied and practiced topic, that has allowed for a better understanding of structures’ conditions and increasingly lead to a more cost-effective management of those infrastructures. In this field, the use of fiber optic sensors has been studied, discussed and practiced with encouraging results. The possibility of understanding and monitor the distributed behavior of extensive stretches of critical structures it’s an enormous advantage that distributed fiber optic sensing provides to SHM systems. In the past decade, several R & D studies have been performed with the goal of improving the knowledge and developing new techniques associated with the application of distributed optical fiber sensors (DOFS in order to widen the range of applications of these sensors and also to obtain more correct and reliable data. This paper presents, after a brief introduction to the theoretical background of DOFS, the latest developments related with the improvement of these products by presenting a wide range of laboratory experiments as well as an extended review of their diverse applications in civil engineering structures.

  9. A Review of Distributed Optical Fiber Sensors for Civil Engineering Applications.

    Science.gov (United States)

    Barrias, António; Casas, Joan R; Villalba, Sergi

    2016-05-23

    The application of structural health monitoring (SHM) systems to civil engineering structures has been a developing studied and practiced topic, that has allowed for a better understanding of structures' conditions and increasingly lead to a more cost-effective management of those infrastructures. In this field, the use of fiber optic sensors has been studied, discussed and practiced with encouraging results. The possibility of understanding and monitor the distributed behavior of extensive stretches of critical structures it's an enormous advantage that distributed fiber optic sensing provides to SHM systems. In the past decade, several R & D studies have been performed with the goal of improving the knowledge and developing new techniques associated with the application of distributed optical fiber sensors (DOFS) in order to widen the range of applications of these sensors and also to obtain more correct and reliable data. This paper presents, after a brief introduction to the theoretical background of DOFS, the latest developments related with the improvement of these products by presenting a wide range of laboratory experiments as well as an extended review of their diverse applications in civil engineering structures.

  10. Image-based dynamic deformation monitoring of civil engineering structures from long ranges

    Science.gov (United States)

    Ehrhart, Matthias; Lienhart, Werner

    2015-02-01

    In this paper, we report on the vibration and displacement monitoring of civil engineering structures using a state of the art image assisted total station (IATS) and passive target markings. By utilizing the telescope camera of the total station, it is possible to capture video streams in real time with 10fps and an angular resolution of approximately 2″/px. Due to the high angular resolution resulting from the 30x optical magnification of the telescope, large distances to the object to be monitored are possible. The laser distance measurement unit integrated in the total station allows to precisely set the camera's focus position and to relate the angular quantities gained from image processing to units of length. To accurately measure the vibrations and displacements of civil engineering structures, we use circular target markings rigidly attached to the object. The computation of the targets' centers is performed by a least squares adjustment of an ellipse according to the Gauß-Helmert model from which the parameters of the ellipse and their standard deviations are derived. In laboratory experiments, we show that movements can be detected with an accuracy of better than 0.2mm for single frames and distances up to 30m. For static applications, where many video frames can be averaged, accuracies of better than 0.05mm are possible. In a field test on a life-size footbridge, we compare the vibrations measured by the IATS to reference values derived from accelerometer measurements.

  11. Discovery Mondays: 'The civil engineering genius of the 100-metre deep underground caverns'

    CERN Multimedia

    2004-01-01

    CERN is first and foremost a place where physicists study particle collisions. But to be able to observe the infinitely small, they need huge pieces of equipment, the accelerators and detectors, whose construction, some 100 metres below the earth's surface calls on the services of other fascinating disciplines. Take civil engineering, for example. For the construction of the LHC some 420 000 cubic metres of rock have had to be excavated for the 6500 metres of tunnel, 6 new shafts and 32 underground chambers and caverns. To avoid disrupting other experiments in progress, the work on these exceptional structures has had to be done without creating vibrations. The ATLAS experiment hall, a huge cathedral-like structure 100 metres below ground, is another mind-blowing feat of civil engineering. Its construction involved the use of ground-breaking technology, such as the system for suspending the ceiling put in place during the excavation work. At the next Discovery Monday, the specialists responsible for...

  12. Strain properties analysis and wireless collection system of PVDF for structural local health monitoring of civil engineering structures

    Science.gov (United States)

    Yu, Yan; Wang, Yang; Dong, Weijie; Jin, Yajing; Ou, Jinping

    2009-07-01

    For large civil engineering structures and base establishments, for example, bridges, super-high buildings, long-span space structures, offshore platforms and pipe systems of water & gas supply, their lives are up to a few decades or centuries. Damaged by environmental loads, fatigue effects, corrosion effects and material aging, these structures experience inevitably such side effects as damage accumulation, resistance reduction and even accidents. The traditional civil structure is a kind of passive one, whose performance and status are unpredictable to a great extent, but the informatics' introduction breaks a new path to obtain the status of the structure, thus it is an important research direction to evaluate and improve reliability of civil structures by the use of monitoring and health diagnosis technique, and this also assures the security of service for civil engineering structures. Smart material structure, originated from the aerospace sector, has been a research hotspot in civil engineering, medicine, shipping, and so on. For structural health monitoring of civil engineering, the research about high-performance sensing unit of smart material structure is very important, and this will possibly push further the development and application of monitoring and health diagnosis techniques. At present, piezoelectric materials are one of the most widely used sensing materials among the research of smart material structures. As one of the piezoelectric materials, PVDF(Polyvinylidene Fluoride)film is widely considered for the advantages of low cost, good mechanical ability, high sensibility, the ability of being easily placed and resistance of corrosion. However, only a few studies exit about building a mature monitoring system using PVDF. In this paper, for the sake of using PVDF for sensing unit for structural local monitoring of civil engineering, the strain sensing properties of PVDF are studied in detail. Firstly, the operating mechanism of PVDF is analyzed

  13. GPR applications in Civil Engineering in Spain - state-of-the-art

    Science.gov (United States)

    Pérez Gracia, Vega; Solla, Mercedes; Santos-Assunçao, Sonia; Lorenzo, Henrique

    2014-05-01

    GPR was introduced in Spain in 1990, and the first significant work was the PhD thesis of H. Lorenzo in 1994. Due to its versatile applicability, the employ has been increased and actually, GPR is extensively used in detection of pipes, wiring and urban services mainly. During the last years, this method was also widely utilized in the detection of graves from the civil war and in forensic studies, with irregular results. It was also commonly applied in archaeology. Actually exists more than 20 private companies offering geotechnical services by means of GPR. Also, several public institutions as Universities and Research Institutes base part of their research in GPR or in GPR applications. Notwithstanding, no training courses of specific formation on GPR is offered, but in several doctorate programs it is possible to work with GPR. Also, in many schools, GPR is part of the geophysical formation of graduate students. However, no national guidelines and rules exist, and each company defines the investigation protocols. Nevertheless, one of the aims of the Comisión Española de Geodesia y Geofísica (Spanish Committee for Geodesy and Geophysics) is to define guidelines for the GPR studies. Probably, the existence of national guidelines or perhaps European guidelines could be the most effective way to promote the responsible use of GPR in different domains. On the other hand, perhaps recommendations on the use of combined methodologies could be a practical way to persuade in the application of geophysical non-destructive technologies. The CEDEX, Centro de Estudios y Experimentación de Obras Públicas (Center for Studies and Experimentation in Civil Engineering), which is a civil engineering research agency in Spain, offers different test sites to calibrate and evaluate the method. It is an autonomous organization, organically ascribed at present to the Ministry of Fomento, and functionally ascribed to the Ministries of Fomento and Medioambiente of Spain, giving

  14. Ten Engineers Reading: Disjunctions between Preference and Practice in Civil Engineering Faculty Responses

    Science.gov (United States)

    Taylor, Summer Smith; Patton, Martha D.

    2006-01-01

    Previous research has indicated that engineering faculty do not follow best practices when commenting on students' technical writing. However, it is unclear whether the faculty prefer to comment in these ineffective ways, or whether they prefer more effective practices but simply do not enact them. This study adapts a well known study of response…

  15. Knowledge, attitude and practices for design for safety: A study on civil & structural engineers.

    Science.gov (United States)

    Goh, Yang Miang; Chua, Sijie

    2016-08-01

    Design for safety (DfS) (also known as prevention through design, safe design and Construction (Design and Management)) promotes early consideration of safety and health hazards during the design phase of a construction project. With early intervention, hazards can be more effectively eliminated or controlled leading to safer worksites and construction processes. DfS is practiced in many countries, including Australia, the UK, and Singapore. In Singapore, the Manpower Ministry enacted the DfS Regulations in July 2015, which will be enforced from August 2016 onwards. Due to the critical role of civil and structural (C&S) engineers during design and construction, the DfS knowledge, attitude and practices (KAP) of C&S engineers have significant impact on the successful implementation of DfS. Thus, this study aims to explore the DfS KAP of C&S engineers so as to guide further research in measuring and improving DfS KAP of designers. During the study, it was found that there is a lack of KAP studies in construction management. Therefore, this study also aims to provide useful lessons for future applications of the KAP framework in construction management research. A questionnaire was developed to assess the DfS KAP of C&S engineers. The responses provided by 43 C&S engineers were analyzed. In addition, interviews with experienced construction professionals were carried out to further understand perceptions of DfS and related issues. The results suggest that C&S engineers are supportive of DfS, but the level of DfS knowledge and practices need to be improved. More DfS guidelines and training should be made available to the engineers. To ensure that DfS can be implemented successfully, there is a need to study the contractual arrangements between clients and designers and the effectiveness of different implementation approaches for the DfS process. The questionnaire and findings in this study provided the foundation for a baseline survey with larger sample size, which is

  16. ADVANCED NICKEL-BASED AND NICKEL-IRON-BASED SUPERALLOYS FOR CIVIL ENGINEERING APPLICATIONS

    Institute of Scientific and Technical Information of China (English)

    U. Brill

    2005-01-01

    The use of high-temperature materials is especially important in power station construction,heating systems engineering, furnace industry, chemical and petrochemical industry, waste incineration plants, coal gasification plants and for flying gas turbines in civil and military aircrafts and helicopters. Particularly in recent years, the development of new processes and the drive to improve the economics of existing processes have increased the requirements significantly so that it is necessary to change from well-proven materials to new alloys. Hitherto, heat resistant ferritic steels sufficed in conventional power station constructions for temperatures up to 550℃ newly developed ferritic/martensitic steels provide sufficient strength up to about 600-620℃. In new processes, e.g. fiuidized-bed combustion of coal, process temperatures up to 900℃ occur. However, this is not the upper limit, since in combustion engines, e.g. gas turbines. Material temperatures up to 1100℃ are reached locally. Similar development trends can also be identified in the petrochemical industry and in the heat treatment and furnace engineering. The advance to ever higher material temperatures now not only has the consequence of having to use materials with enhanced high-strength properties, considerable attention now also has to be given to their chemical stability in corrosive media. Therefore not only examples of the use of high-temperature alloys for practical applications will be given but also be contributed to some general rules for material selection with regard to their high-temperature strength and corrosion resistance.

  17. Use of Time- and Frequency-Domain Approaches for Damage Detection in Civil Engineering Structures

    Directory of Open Access Journals (Sweden)

    V. H. Nguyen

    2014-01-01

    Full Text Available The aim of this paper is to apply both time- and frequency-domain-based approaches on real-life civil engineering structures and to assess their capability for damage detection. The methodology is based on Principal Component Analysis of the Hankel matrix built from output-only measurements and of Frequency Response Functions. Damage detection is performed using the concept of subspace angles between a current (possibly damaged state and a reference (undamaged state. The first structure is the Champangshiehl Bridge located in Luxembourg. Several damage levels were intentionally created by cutting a growing number of prestressed tendons and vibration data were acquired by the University of Luxembourg for each damaged state. The second example consists in reinforced and prestressed concrete panels. Successive damages were introduced in the panels by loading heavy weights and by cutting steel wires. The illustrations show different consequences in damage identification by the considered techniques.

  18. Civil-engineering work for Linac 4 and related roadworks - information for drivers

    CERN Multimedia

    TS Department

    2008-01-01

    The civil-engineering work for the construction of the Linac 4 accelerator has started on 22 October on the Mont Citron, the mound just opposite Restaurant No. 2 between the Computer Centre and the PS complex. Initially the work will involve excavating the mound and transporting the spoil to the area in front of Building SM18. This first phase of work will last for about five months until April 2009. The large number of lorries will cause disruption to traffic on the Route Rutherford, part of the Route Einstein and in the transfer tunnel between the two sites. Traffic lights for alternating traffic will be in operation at each end of the tunnel since there is insufficient room for two lorries travelling in opposite directions to use it at the same time. Consequently, users are strongly recommended not to use the tunnel except for transporting equipment between the two sites. Users not transporting equipment are strongly recommended ...

  19. Designing educational software for analysing pressurised hydraulic systems in civil engineering

    Directory of Open Access Journals (Sweden)

    Myriam Rocío Pallares Muñoz

    2010-04-01

    Full Text Available New information technologies have opened up a world of inexhaustible possibilities in teaching. Using such technologies in technical teaching has become indispensable due to the nature of current resources in industrial design and production. This work consists of preparing didactic material (educational software aimed at tea- ching fluid mechanics, particularly analysing tube, tank and pumping systems, initially aimed at civil engineering students from the Universidad Santo Tomás in Bogotá. Such materials have been successfully developed and used in their formal programmes by several universities around the world during the last few years. The didactic software mentioned in this work was constructed using Visual Basic programming language. This has resulted in a very useful educational tool, leading to effective teacher—student communication which is suitable for both the classroom and students’ personal work (Angel y Bautista, 2001; Aguiar, 2002.

  20. System identification of civil engineering structures with multiple inputs by decoupling output signals

    Science.gov (United States)

    Li, Jian; Ruiz-Sandoval, Manuel; Spencer, Billie F.; Elnashai, Amr S.

    2014-03-01

    System identification of civil engineering structures are often formulated as Multiple-Input, Multiple-Output (MIMO) problems due to the complexity of loading conditions such as differential ground motion, which is also multi-directional in nature. Such MIMO system identification problems are challenging due to strong coupling between the contributions of multiple ground motion inputs to each individual response. Compared with Single-Input, Multiple-Output (SIMO) system identification, MIMO problems are often more computationally complex and error prone. In this paper, a new system identification strategy is proposed in which a more complex MIMO problem is converted into a number of SIMO problems by decoupling the contribution of multiple inputs to the outputs. A QR-factorization based approach is adopted for the decoupling and its accuracy is investigated. The effectiveness of the proposed strategy is demonstrated through applications to a two-span straight bridge and a four-span curved bridge, both are highway bridges.

  1. Methodology to improve design of accelerated life tests in civil engineering projects.

    Directory of Open Access Journals (Sweden)

    Jing Lin

    Full Text Available For reliability testing an Energy Expansion Tree (EET and a companion Energy Function Model (EFM are proposed and described in this paper. Different from conventional approaches, the EET provides a more comprehensive and objective way to systematically identify external energy factors affecting reliability. The EFM introduces energy loss into a traditional Function Model to identify internal energy sources affecting reliability. The combination creates a sound way to enumerate the energies to which a system may be exposed during its lifetime. We input these energies into planning an accelerated life test, a Multi Environment Over Stress Test. The test objective is to discover weak links and interactions among the system and the energies to which it is exposed, and design them out. As an example, the methods are applied to the pipe in subsea pipeline. However, they can be widely used in other civil engineering industries as well. The proposed method is compared with current methods.

  2. Methodology to improve design of accelerated life tests in civil engineering projects.

    Science.gov (United States)

    Lin, Jing; Yuan, Yongbo; Zhou, Jilai; Gao, Jie

    2014-01-01

    For reliability testing an Energy Expansion Tree (EET) and a companion Energy Function Model (EFM) are proposed and described in this paper. Different from conventional approaches, the EET provides a more comprehensive and objective way to systematically identify external energy factors affecting reliability. The EFM introduces energy loss into a traditional Function Model to identify internal energy sources affecting reliability. The combination creates a sound way to enumerate the energies to which a system may be exposed during its lifetime. We input these energies into planning an accelerated life test, a Multi Environment Over Stress Test. The test objective is to discover weak links and interactions among the system and the energies to which it is exposed, and design them out. As an example, the methods are applied to the pipe in subsea pipeline. However, they can be widely used in other civil engineering industries as well. The proposed method is compared with current methods.

  3. Human engineering analysis for the high speed civil transport flight deck

    Science.gov (United States)

    Regal, David M.; Alter, Keith W.

    1993-01-01

    The Boeing Company is investigating the feasibility of building a second generation supersonic transport. If current studies support its viability, this airplane, known as the High Speed Civil Transport (HSCT), could be launched early in the next century. The HSCT will cruise at Mach 2.4, be over 300 feet long, have an initial range of between 5000 and 6000 NM, and carry approximately 300 passengers. We are presently involved in developing an advanced flight deck for the HSCT. As part of this effort we are undertaking a human engineering analysis that involves a top-down, mission driven approach that will allow a systematic determination of flight deck functional and information requirements. The present paper describes this work.

  4. Web-based Peer Assessment: A Case Study with Civil Engineering Students

    Directory of Open Access Journals (Sweden)

    Gonçalo Cruz

    2013-02-01

    Full Text Available Peer-assessed online collaborative writing is of growing importance for higher education. Based on the quantitative and qualitative analysis of collected data, this work presents the results of a case study in a graduate civil engineering course at the University of Trás-os-Montes e Alto Douro, Vila Real, Portugal. After an overall presentation of the learning activity, it examines students’ attitudes towards web-based peer assessment and identifies which factors are related to students’ use and appreciation of feedback. In addition, an analysis of the type of feedback is presented in an attempt to evaluate students’  written communication skills. The results of this study provide indications on how to improve the design and implementation of future web-based peer assessment tasks and raise questions on the effectiveness of peer/teacher grading in the use of feedback.

  5. Experience within the CERN Civil Engineering Group with Outsourced Design Services

    CERN Document Server

    Watson, T

    1998-01-01

    In April 1996, CERN awarded three contracts for civil engineering design services associated with the LHC project. The three contracts were awarded to three different joint ventures of firms from five member states. The total bid price for these services was in excess of 35 MCHF and the contracts will run for up to seven years. This paper aims to discuss and analyze the experience gained to date in the management of these contracts. In particular, the paper will address the issues of conditions of contract and specification for this form of contract. Current experience with each of the three consultants will be presented with the areas of difficulty highlighted. Conclusions will be made regarding future use of such contracts and in particular the way in which CERN must change in order to work efficiently with external designers.

  6. Consolidation on civil engineering and technical infrastructure at CERN from now to 2010

    CERN Document Server

    Alves, P; Pepinster, P; CERN. Geneva. ST Division

    2003-01-01

    The age of the civil engineering structure (office buildings, halls) and of tertiary technical equipment (mainly HVAC and electricity) at CERN is such that their renovation must be considered in the near future. Due to the large number of buildings and equipment in these conditions, and the restricted budget available, it is extremely important to define priorities. The aim of this note is to give the picture of the current conditions and the related problems, based on the backlog of CERN database (MP5) and confronting it with the inventory made at CERN by an external company. After having identified the most frequent problems and repairs to carry out, a planning for intervention is therefore presented optimizing the safety aspects, maintenance costs and comfort for the users. The timescale of this intervention is related to the money that will be available in the coming years.

  7. Discovery Mondays - 'The civil engineering genius of the 100-metre deep underground caverns'

    CERN Multimedia

    2004-01-01

    CERN is first and foremost a place where physicists study particle collisions. But to be able to observe the infinitely small, they need huge pieces of equipment, the accelerators and detectors, whose construction, some 100 metres below the earth's surface, calls on the services of other fascinating disciplines. Take civil engineering, for example. At the next Discovery Monday, come and find out about the machines involved in the large-scale excavation and concreting work. Everyone is welcome at Microcosm, which will be specially transformed into a worksite for the occasion! Come along to Microcosm (Reception Building 33, Meyrin site) on Monday 6 September from 7:30 p.m. to 9:00 p.m. Entrance Free http://www.cern.ch/microcosm

  8. Cost control management strategies of civil engineering%土建工程造价控制管理策略

    Institute of Scientific and Technical Information of China (English)

    刘斌

    2015-01-01

    介绍了土建工程造价管理的重要性,从工程决策、设计、施工、决算四个阶段,阐述了土建工程造价管理的策略,指出工程造价管理贯穿于施工全过程,只有严格控制施工各环节,才能实现企业成本的节约与积累。%The article introduces the importance of civil engineering cost management,describes civil engineering cost management strategies from four phases of engineering decision,design,construction and computation,and finally points out that engineering cost management penetrates the whole construction process. Therefore,it is necessary for strictly controlling construction points so as to save and accumulate enterprise cost.

  9. Civil Engineering Applications of Ground Penetrating Radar: Research Perspectives in COST Action TU1208

    Science.gov (United States)

    Pajewski, Lara; Benedetto, Andrea; Loizos, Andreas; Slob, Evert; Tosti, Fabio

    2013-04-01

    Ground Penetrating Radar (GPR) is a safe, non-destructive and non-invasive imaging technique that can be effectively used for advanced inspection of composite structures and for diagnostics affecting the whole life-cycle of civil engineering works. GPR provides high resolution images of structures and subsurface through wide-band electromagnetic waves. It can be employed for the surveying of roads, pavements, bridges, tunnels, for detecting underground cavities and voids, for utility sensing, for the inspection of buildings, reinforced concrete and pre-cast concrete structures, for geotechnical investigation, in foundation design, as well as for several other purposes. Penetration and resolution of GPR depend primarily on the transmitting frequency of the equipment, the antenna characteristics, the electrical properties of the ground or of the surveyed material, and the contrasting electrical properties of the targets with respect to the surrounding medium. Generally there is a direct relationship between the transmitter frequency and the resolution that can be obtained; conversely there is an inverse relationship between frequency and penetration depth. GPR works best in dry ground environments, but can also give good results in wet, saturated materials; it does not work well in saline conditions, in high-conductivity media and through dense clays which limit signal penetration. Different approaches can be employed in the processing of collected GPR data. Once data have been processed, they still have to be analysed. This is a challenging problem, since interpretation of GPR radargrams is typically non-intuitive and considerable expertise is needed. In the presence of a complex scenario, an accurate electromagnetic forward solver is a fundamental tool for the validation of data interpretation. It can be employed for the characterization of scenarios, as a preliminary step that precedes a survey, or to gain a posteriori a better understanding of measured data. It

  10. IMpact of international accreditation in the recognition of academic degrees in the domestic and foreign labor market. Case study: Civil engineering program

    Directory of Open Access Journals (Sweden)

    Jose Barragan Codina

    2015-07-01

    Full Text Available In a globalized era it is not enough to have a professional qualification to ensure economic and professional success. The academic background of professionals must be adequate to face challenges and solve problems of a globalized and dynamic world. Civil engineers face many complications when seeking an international career. There are many differences within the profession globally such as: resources, workforce, climate, language, culture, philosophies, regulations, etc. which raise the entry barriers to fully practice as a civil engineer. The International accreditations play a major role as the first evidence of the civil engineer technical proficiency. These assure the quality of the higher education curricula and add value to the human capital on an international context. Despite the fact that many Mexican Universities have academic programs which have international accreditations, civil engineer graduates cannot easily work across borders. This paper describes the impact that international accreditation has for civil engineers when seeking an international career.

  11. Applicability of CDM to civil engineering projects case study on reduction of CO2 emission by port extension

    Energy Technology Data Exchange (ETDEWEB)

    Sekimoto, T. [Penta-Ocean Construction Co. LTD, Yonku-cho 1534-1, Nishinasuno-machi, Nasu, Tochigi, 329-2746 (Japan)

    2003-07-01

    This paper investigates the applicability of CDM to civil engineering projects through a case study on the project to extend Port Samainda in Indonesia. The goal of this project is to improve the physical distribution system of the port so that it can accommodate increasing future demand for the cargo transportation. Based on the project report by JICA (2002), we first outline the predicted demand for the cargo transportation and select possible three options in which a cargo vessel with different capabilities and respective port facilities are assigned. For each option, CO2 emissions from both cargo and dredging vessels are predicted and compared. It is found that the total CO2 emission may be reduced significantly by introducing a large-draft vessel and deep navigation channels. This feature becomes more prominent if a traveling distance of the cargo vessels is long enough so that CO2 emissions from cargo vessels dominates those of dredging vessels. This observation supports the applicability of CDM to civil engineering projects because reduction of the CO2 emission is attained by improving distribution systems through civil engineering works such as extension of the port and the maintenance dredging. Finally, we discuss future problems to be investigated for the practical application of CDM to a civil engineering project.

  12. An Analysis of Female Lecturers' Participation in Civil Engineering Research and Development Activities at One Polytechnic in Zimbabwe

    Science.gov (United States)

    Chikuvadze, Pinias; Matswetu, Vimbai Sharon; Mugijima, Samuel

    2015-01-01

    This study sought to explore female lecturers' participation in civil engineering research and development activities at one polytechnic in Zimbabwe. Case study design was chosen for this study to make predictions, narration of events, comparisons and drawing of conclusions. The female lecturers were purposively sampled to participate in the…

  13. Winning the Popularity Contest: Researcher Preference When Selecting Resources for Civil Engineering, Computer Science, Mathematics and Physics Dissertations

    Science.gov (United States)

    Dotson, Daniel S.; Franks, Tina P.

    2015-01-01

    More than 53,000 citations from 609 dissertations published at The Ohio State University between 1998-2012 representing four science disciplines--civil engineering, computer science, mathematics and physics--were examined to determine what, if any, preferences or trends exist. This case study seeks to identify whether or not researcher preferences…

  14. Incorporating a Systems Approach into Civil and Environmental Engineering Curricula: Effect on Course Redesign, and Student and Faculty Attitudes

    Science.gov (United States)

    Hayden, Nancy J.; Rizzo, Donna M.; Dewoolkar, Mandar M.; Neumann, Maureen D.; Lathem, Sandra; Sadek, Adel

    2011-01-01

    This paper presents a brief overview of the changes made during our department level reform (DLR) process (Grant Title: "A Systems Approach for Civil and Environmental Engineering Education: Integrating Systems Thinking, Inquiry-Based Learning and Catamount Community Service-Learning Projects") and some of the effects of these changes on…

  15. A preliminary study on the integral relationship between critical thinking and mathematical thinking among practicing civil engineers

    Science.gov (United States)

    Osman, Sharifah; Mohammad, Shahrin; Abu, Mohd Salleh

    2015-05-01

    Mathematics and engineering are inexorably and significantly linked and essentially required in analyzing and accessing thought to make good judgment when dealing in complex and varied engineering problems. A study in the current engineering education curriculum to explore how the critical thinking and mathematical thinking relates to one another, is therefore timely crucial. Unfortunately, there is not much information available explicating about the link. This paper aims to report findings of a critical review as well as to provide brief description of an on-going research aimed to investigate the dispositions of critical thinking and the relationship and integration between critical thinking and mathematical thinking during the execution of civil engineering tasks. The first part of the paper reports an in-depth review on these matters based on rather limited resources. The review showed a considerable form of congruency between these two perspectives of thinking, with some prevalent trends of engineering workplace tasks, problems and challenges. The second part describes an on-going research to be conducted by the researcher to investigate rigorously the relationship and integration between these two types of thinking within the perspective of civil engineering tasks. A reasonably close non-participant observations and semi-structured interviews will be executed for the pilot and main stages of the study. The data will be analyzed using constant comparative analysis in which the grounded theory methodology will be adopted. The findings will serve as a useful grounding for constructing a substantive theory revealing the integral relationship between critical thinking and mathematical thinking in the real civil engineering practice context. The substantive theory, from an angle of view, is expected to contribute some additional useful information to the engineering program outcomes and engineering education instructions, aligns with the expectations of

  16. Pedagogies to Achieve Sustainability Learning Outcomes in Civil and Environmental Engineering Students

    Directory of Open Access Journals (Sweden)

    Angela R. Bielefeldt

    2013-10-01

    Full Text Available The civil and environmental engineering disciplines have identified the levels of knowledge about sustainability that are desirable for students to achieve as they graduate with a bachelor’s degree, as well as sustainability-related competencies to be obtained during a master’s degree, and on-the-job, prior to professional licensure. Different pedagogies are better suited to help students attain these levels of cognitive ability, while also developing affective outcomes. This paper provides examples of different methods that have been used at one institution to educate engineering students about sustainability, supported with data that indicates whether the method successfully achieved the targeted learning outcomes. Lectures, in-class active learning, readings, and appropriately targeted homework assignments can achieve basic sustainability knowledge and comprehension by requiring students to define, identify, and explain aspects of sustainability. Case studies and the application of software tools are good methods to achieve application and analysis competencies. Project-based learning (PBL and project-based service-learning (PBSL design projects can reach the synthesis level and may also develop affective outcomes related to sustainability. The results provide examples that may apply to a wider range of disciplines and suggest sustainability outcomes that are particularly difficult to teach and/or assess.

  17. LANDSAT 8 MULTISPECTRAL AND PANSHARPENED IMAGERY PROCESSING ON THE STUDY OF CIVIL ENGINEERING ISSUES

    Directory of Open Access Journals (Sweden)

    M. A. Lazaridou

    2016-06-01

    Full Text Available Scientific and professional interests of civil engineering mainly include structures, hydraulics, geotechnical engineering, environment, and transportation issues. Topics included in the context of the above may concern urban environment issues, urban planning, hydrological modelling, study of hazards and road construction. Land cover information contributes significantly on the study of the above subjects. Land cover information can be acquired effectively by visual image interpretation of satellite imagery or after applying enhancement routines and also by imagery classification. The Landsat Data Continuity Mission (LDCM – Landsat 8 is the latest satellite in Landsat series, launched in February 2013. Landsat 8 medium spatial resolution multispectral imagery presents particular interest in extracting land cover, because of the fine spectral resolution, the radiometric quantization of 12bits, the capability of merging the high resolution panchromatic band of 15 meters with multispectral imagery of 30 meters as well as the policy of free data. In this paper, Landsat 8 multispectral and panchromatic imageries are being used, concerning surroundings of a lake in north-western Greece. Land cover information is extracted, using suitable digital image processing software. The rich spectral context of the multispectral image is combined with the high spatial resolution of the panchromatic image, applying image fusion – pansharpening, facilitating in this way visual image interpretation to delineate land cover. Further processing concerns supervised image classification. The classification of pansharpened image preceded multispectral image classification. Corresponding comparative considerations are also presented.

  18. Conceptual Design of a Two Spool Compressor for the NASA Large Civil Tilt Rotor Engine

    Science.gov (United States)

    Veres, Joseph P.; Thurman, Douglas R.

    2010-01-01

    This paper focuses on the conceptual design of a two spool compressor for the NASA Large Civil Tilt Rotor engine, which has a design-point pressure ratio goal of 30:1 and an inlet weight flow of 30.0 lbm/sec. The compressor notional design requirements of pressure ratio and low-pressure compressor (LPC) and high pressure ratio compressor (HPC) work split were based on a previous engine system study to meet the mission requirements of the NASA Subsonic Rotary Wing Projects Large Civil Tilt Rotor vehicle concept. Three mean line compressor design and flow analysis codes were utilized for the conceptual design of a two-spool compressor configuration. This study assesses the technical challenges of design for various compressor configuration options to meet the given engine cycle results. In the process of sizing, the technical challenges of the compressor became apparent as the aerodynamics were taken into consideration. Mechanical constraints were considered in the study such as maximum rotor tip speeds and conceptual sizing of rotor disks and shafts. The rotor clearance-to-span ratio in the last stage of the LPC is 1.5% and in the last stage of the HPC is 2.8%. Four different configurations to meet the HPC requirements were studied, ranging from a single stage centrifugal, two axi-centrifugals, and all axial stages. Challenges of the HPC design include the high temperature (1,560deg R) at the exit which could limit the maximum allowable peripheral tip speed for centrifugals, and is dependent on material selection. The mean line design also resulted in the definition of the flow path geometry of the axial and centrifugal compressor stages, rotor and stator vane angles, velocity components, and flow conditions at the leading and trailing edges of each blade row at the hub, mean and tip. A mean line compressor analysis code was used to estimate the compressor performance maps at off-design speeds and to determine the required variable geometry reset schedules of the

  19. Landsat 8 Multispectral and Pansharpened Imagery Processing on the Study of Civil Engineering Issues

    Science.gov (United States)

    Lazaridou, M. A.; Karagianni, A. Ch.

    2016-06-01

    Scientific and professional interests of civil engineering mainly include structures, hydraulics, geotechnical engineering, environment, and transportation issues. Topics included in the context of the above may concern urban environment issues, urban planning, hydrological modelling, study of hazards and road construction. Land cover information contributes significantly on the study of the above subjects. Land cover information can be acquired effectively by visual image interpretation of satellite imagery or after applying enhancement routines and also by imagery classification. The Landsat Data Continuity Mission (LDCM - Landsat 8) is the latest satellite in Landsat series, launched in February 2013. Landsat 8 medium spatial resolution multispectral imagery presents particular interest in extracting land cover, because of the fine spectral resolution, the radiometric quantization of 12bits, the capability of merging the high resolution panchromatic band of 15 meters with multispectral imagery of 30 meters as well as the policy of free data. In this paper, Landsat 8 multispectral and panchromatic imageries are being used, concerning surroundings of a lake in north-western Greece. Land cover information is extracted, using suitable digital image processing software. The rich spectral context of the multispectral image is combined with the high spatial resolution of the panchromatic image, applying image fusion - pansharpening, facilitating in this way visual image interpretation to delineate land cover. Further processing concerns supervised image classification. The classification of pansharpened image preceded multispectral image classification. Corresponding comparative considerations are also presented.

  20. MANUAL. Fly ash in civil engineering, Gravel roads; HANDBOK. Flygaska i mark- och vaegbyggnad, Grusvaegar

    Energy Technology Data Exchange (ETDEWEB)

    Munde, Hanna; Svedberg, Bo; Macsik, Josef; Maijala, Aino; Lahtinen, Pentti; Ekdahl, Peter; Neren, Jens [Vattenfall AB, Stockholm (Sweden). Vaerme Norden

    2006-01-15

    Fly ash based on biofuels or coal has been used as construction material for a long time in roads and other civil engineering applications. Some example, where it has been used in roadbase and subbase of gravel roads, are in the counties of Uppsala, Soedermanland, Vaestmanland and in Finland. The use of fly ash has contributed to good function for example as bearing capacity, thaw and frost capacity and good durability. This has also reduced costs for maintenance. The objective of this project was to develop a manual to provide a base for contemporary use of fly ash in road constructions. In the manual experience from studies, field tests and regulations has been compiled. The manual handles fly ash as base for products to be used in base and subbase in gravel roads. Future user of the guidelines are mainly consultant engineers and contractors. However the aim of the manual is to also support road administrators, environmental authorities and industry. The project has been carried out parallel to another ongoing national project titled 'Guidelines, Use of alternative materials in civil engineering'. The objective of that project is to establish a base for handling of alternative materials in Sweden. Fly ash in gravel roads are mainly used in two typical applications, one without any additive in a single layer and one with fly ash mixed with gravel. The use of flyash provides functional properties such as increased stiffness, stability and enhanced frost and thaw capacity for the road construction in total. Furthermore the products based on fly ash will have low permeability and good frost and thaw durability. These properties are for example related to fly ash quality, design and construction and are in general expected to be better than for traditional constructions using, for example, sand or gravel. The properties can be enhanced further by using binders such as cement and Merit. Fly ash should always be used above the ground water table with

  1. Learning about Environmental Issues in Engineering Programmes: A Case Study of First-Year Civil Engineering Students' Contextualisation of an Ecology Course

    Science.gov (United States)

    Lundholm, Cecilia

    2004-01-01

    Describes how first-year civil engineering students interpreted the content and structure of an ecology course. Students' learning processes were analysed from an intentional perspective, i.e. a perspective that takes into account the students' educational aims and conceptions of the study situation. Interviews were carried out with six civil…

  2. Validation of the GPU-Accelerated CFD Solver ELBE for Free Surface Flow Problems in Civil and Environmental Engineering

    Directory of Open Access Journals (Sweden)

    Christian F. Janßen

    2015-07-01

    Full Text Available This contribution is dedicated to demonstrating the high potential and manifold applications of state-of-the-art computational fluid dynamics (CFD tools for free-surface flows in civil and environmental engineering. All simulations were performed with the academic research code ELBE (efficient lattice boltzmann environment, http://www.tuhh.de/elbe. The ELBE code follows the supercomputing-on-the-desktop paradigm and is especially designed for local supercomputing, without tedious accesses to supercomputers. ELBE uses graphics processing units (GPU to accelerate the computations and can be used in a single GPU-equipped workstation of, e.g., a design engineer. The code has been successfully validated in very different fields, mostly related to naval architecture and mechanical engineering. In this contribution, we give an overview of past and present applications with practical relevance for civil engineers. The presented applications are grouped into three major categories: (i tsunami simulations, considering wave propagation, wave runup, inundation and debris flows; (ii dam break simulations; and (iii numerical wave tanks for the calculation of hydrodynamic loads on fixed and moving bodies. This broad range of applications in combination with accurate numerical results and very competitive times to solution demonstrates that modern CFD tools in general, and the ELBE code in particular, can be a helpful design tool for civil and environmental engineers.

  3. Categorization of seismically-induced stresses for civil and mechanical engineering

    Energy Technology Data Exchange (ETDEWEB)

    Labbé, P.B., E-mail: pierre.labbe@edf.fr [EDF Nuclear Engineering Division, 1, place Pleyel, 93282, Saint-Denis (France)

    2013-02-15

    Highlights: ► A seismic load can be of any type from force-controlled to displacement-controlled. ► Seismic input and structural features play a concurrent role in seismic load categorization. ► A margin index is introduced, which controls seismic load categorization. ► A formula is given for calculating the margin index. ► A formula is given that provides the primary part of a seismically-induced stress. -- Abstract: Both civil and mechanical engineers come across loads of the force-controlled type (qualified as “primary”) or of the displacement-controlled type (qualified as “secondary”). For decades, different authors with either civil or mechanical backgrounds have been debating whether a particular seismic load should be classified as primary or secondary, but without apparent mutual understanding or mutual benefit so far. The purpose of this paper is to bring some clarity to the subject by considering a family of oscillators, which are characterized by their ductile capacity, μ{sub u}, and their “effective stiffness factor”, τ. The considered range of τ values (0 < τ < 1) enables to cover all cases from the perfect damage to the perfect non-damage models. A structural index λ is also introduced, which is a mix of ductility and effective stiffness factor. It is concluded that a seismic input cannot be a priori regarded as primary or secondary. Both the λ value of the structure or component and the slope, p, of the input spectrum in the vicinity of its (dominant) natural frequency should be considered concurrently when making a decision about stress categorization. A margin index m is introduced, which controls seismic load/stress categorization. A formula is given that provides the primary part of a seismically-induced stress.

  4. Curricular Reform: Systems Modeling and Sustainability in Civil and Environmental Engineering at the University of Vermont

    Science.gov (United States)

    Rizzo, D. M.; Hayden, N. J.; Dewoolkar, M.; Neumann, M.; Lathem, S.

    2009-12-01

    Researchers at the University of Vermont were awarded a NSF-sponsored Department Level Reform (DLR) grant to incorporate a systems approach to engineering problem solving within the civil and environmental engineering programs. A systems approach challenges students to consider the environmental, social, and economic aspects within engineering solutions. Likewise, sustainability requires a holistic approach to problem solving that includes economic, social and environmental factors. Our reform has taken a multi-pronged approach in two main areas that include implementing: a) a sequence of three systems courses related to environmental and transportation systems that introduce systems thinking, sustainability, and systems analysis and modeling; and b) service-learning (SL) projects as a means of practicing the systems approach. Our SL projects are good examples of inquiry-based learning that allow students to emphasize research and learning in areas of most interest to them. The SL projects address real-world open-ended problems. Activities that enhance IT and soft skills for students are incorporated throughout the curricula. Likewise, sustainability has been a central piece of the reform. We present examples of sustainability in the SL and modeling projects within the systems courses (e.g., students have used STELLA™ systems modeling software to address the impact of different carbon sequestration strategies on global climate change). Sustainability in SL projects include mentoring home schooled children in biomimicry projects, developing ECHO exhibits and the design of green roofs, bioretention ponds and porous pavement solutions. Assessment includes formative and summative methods involving student surveys and focus groups, faculty interviews and observations, and evaluation of student work.

  5. Rhetorical Impact through Hedging Devices in the ‘Results and Discussion’ Part of a Civil Engineering Research Article

    Directory of Open Access Journals (Sweden)

    Minoo Khamesian

    2015-12-01

    Full Text Available It is common knowledge that hedging devices as a rhetorical technique common in all persuasive writing are considerably important in scientific discourse, for they are tools which facilitate presenting claims or arguments in a polite, acceptable and respectful manner. In addition, they are discoursal resources available to a scientific writer’s propositions to express uncertainty, skepticism, and open-mindedness. Research articles are an important means of communication between different members of a discourse community, and will be convincing to a certain extent only when authors are able to employ rhetorical conventions, such as hedging devices, persuasively. However, hedging is a problematic aspect in EAP learning since rarely are the learners able to hedge their statements appropriately, engineering students not being an exception. Therefore, this article tends to linguistically analyze the function of rhetorical impact of using hedging devices in the results and discussion part of a civil engineering research article published in the Asian Journal of Civil Engineering (Building & Housing to conclude that a greater and more systematic attention should be given to hedging devices considering their importance in EAP. The implication is that students, especially the Non Native English Speakers, be taught how to recognize and effectively use hedging devices in their writing as they do not seem to be familiar with hedges and therefore find it particularly difficult to hedge their statements appropriately. Keywords: hedging devices, discourse community, linguostylistic analysis, Civil Engineering Research Articles

  6. Multi-Sensing system for outdoor thermal monitoring: Application to large scale civil engineering components

    Science.gov (United States)

    Crinière, Antoine; Dumoulin, Jean; Manceau, Jean-Luc; Perez, Laetitia; Bourquin, Frederic

    2014-05-01

    Aging of transport infrastructures combined with traffic and climatic solicitations contribute to the reduction of their performances. To address and quantify the resilience of civil engineering structure, investigations on robust, fast and efficient methods are required. Among research works carried out at IFSTTAR, methods for long term monitoring face an increasing demand. Such works take benefits of this last decade technological progresses in ICT domain. The present study follows the ISTIMES European project [1], which aimed at demonstrate the ability of different electromagnetic sensing techniques, processing methods and ICT architecture, to be used for long term monitoring of critical transport infrastructures. Thanks to this project a multi-sensing techniques system, able to date and synchronize measurements carried out by infrared thermography coupled with various measurements data (i.e. weather parameters), have been designed, developed and implemented on real site [2]. Among experiments carried out on real transport infrastructure, it has been shown, for the "Musmesci" bridge deck (Italy), that by using infrared thermal image sequence with weather measurements during sevral days it was possible to develop analysis methods able to produce qualitative and quantitative data [3]. In the present study, added functionalities were designed and added to the "IrLAW" system in order to reach full autonomy in term of power supply, very long term measurement capability (at least 1 year) and automated data base feeding. The surveyed civil engineering structures consist in two concrete beams of 16 m long and 21 T weight each. One of the two beams was damage by high energy mechanical impact at the IFSTTAR falling rocks test station facilities located in the French Alpes [4]. The system is composed of one IR uncooled microbolometric camera (FLIR SC325) with a 320X240 Focal Plane Array detector in band III, a weather station VAISALA WXT520, a GPS, a failover power supply

  7. Advanced spatio-temporal filtering techniques for photogrammetric image sequence analysis in civil engineering material testing

    Science.gov (United States)

    Liebold, F.; Maas, H.-G.

    2016-01-01

    The paper shows advanced spatial, temporal and spatio-temporal filtering techniques which may be used to reduce noise effects in photogrammetric image sequence analysis tasks and tools. As a practical example, the techniques are validated in a photogrammetric spatio-temporal crack detection and analysis tool applied in load tests in civil engineering material testing. The load test technique is based on monocular image sequences of a test object under varying load conditions. The first image of a sequence is defined as a reference image under zero load, wherein interest points are determined and connected in a triangular irregular network structure. For each epoch, these triangles are compared to the reference image triangles to search for deformations. The result of the feature point tracking and triangle comparison process is a spatio-temporally resolved strain value field, wherein cracks can be detected, located and measured via local discrepancies. The strains can be visualized as a color-coded map. In order to improve the measuring system and to reduce noise, the strain values of each triangle must be treated in a filtering process. The paper shows the results of various filter techniques in the spatial and in the temporal domain as well as spatio-temporal filtering techniques applied to these data. The best results were obtained by a bilateral filter in the spatial domain and by a spatio-temporal EOF (empirical orthogonal function) filtering technique.

  8. Optimising a modified free-space permittivity characterisation method for civil engineering applications

    Science.gov (United States)

    Muller, Wayne; Scheuermann, Alexander

    2016-04-01

    Measuring the electrical permittivity of civil engineering materials is important for a range of ground penetrating radar (GPR) and pavement moisture measurement applications. Compacted unbound granular (UBG) pavement materials present a number of preparation and measurement challenges using conventional characterisation techniques. As an alternative to these methods, a modified free-space (MFS) characterisation approach has previously been investigated. This paper describes recent work to optimise and validate the MFS technique. The research included finite difference time domain (FDTD) modelling to better understand the nature of wave propagation within material samples and the test apparatus. This research led to improvements in the test approach and optimisation of sample sizes. The influence of antenna spacing and sample thickness on the permittivity results was investigated by a series of experiments separating antennas and measuring samples of nylon and water. Permittivity measurements of samples of nylon and water approximately 100 mm and 170 mm thick were also compared, showing consistent results. These measurements also agreed well with surface probe measurements of the nylon sample and literature values for water. The results indicate permittivity estimates of acceptable accuracy can be obtained using the proposed approach, apparatus and sample sizes.

  9. Self-monitoring fiber reinforced polymer strengthening system for civil engineering infrastructures

    Science.gov (United States)

    Jiang, Guoliang; Dawood, Mina; Peters, Kara; Rizkalla, Sami

    2008-03-01

    Fiber reinforced polymer (FRP) materials are currently used for strengthening civil engineering infrastructures. The strengthening system is dependant on the bond characteristics of the FRP to the external surface of the structure to be effective in resisting the applied loads. This paper presents an innovative self-monitoring FRP strengthening system. The system consists of two components which can be embedded in FRP materials to monitor the global and local behavior of the strengthened structure respectively. The first component of the system is designed to evaluate the applied load acting on a structure based on elongation of the FRP layer along the entire span of the structure. Success of the global system has been demonstrated using a full-scale prestressed concrete bridge girder which was loaded up to failure. The test results indicate that this type of sensor can be used to accurately determine the load prior to failure within 15 percent of the measured value. The second sensor component consists of fiber Bragg grating sensors. The sensors were used to monitor the behavior of steel double-lap shear splices tested under tensile loading up to failure. The measurements were used to identify abnormal structural behavior such as epoxy cracking and FRP debonding. Test results were also compared to numerical values obtained from a three dimensional shear-lag model which was developed to predict the sensor response.

  10. Virtual Placements to Develop Employability Skills for Civil and Environmental Engineering Students

    Directory of Open Access Journals (Sweden)

    Parneet Paul

    2015-04-01

    Full Text Available This project work addresses the crucial need to encourage undergraduate civil and environmental engineering students to gain employment skills and training right from the start of their studies so that their overall employability increases; their confidence level in networking with industry and within the workplace increases; and so that they are successfully able to obtain employment after finishing their studies. This initiative is a stepping-stone employability exercise which focuses specifically on first year students to help them engage with industry right from the start of their course. It is proposed that they would gain some realistic work experience both individually and as part of group within a virtual work environment using an action learning approach. The virtual environment used was based on SecondLife, a popular virtual reality programme. A pilot scheme was set up and run at Brunel University during the summer of 2014 using eight self-selecting first year students. The scheme’s outputs were extensively monitored and evaluated to assess its impact on the development of employability skills. This approach may prove a cost effective way of letting students gain an insight into the workplace whilst improving these skills. It may also prove a way for employers to select from a large range of students the best to actually undertake their real work-based internships.

  11. The Use of MIVES as a Sustainability Assessment MCDM Method for Architecture and Civil Engineering Applications

    Directory of Open Access Journals (Sweden)

    Oriol Pons

    2016-05-01

    Full Text Available Environmental and sustainability assessment tools have an important role in moving towards a better world, bringing knowledge and raising awareness. In the architecture and civil engineering sector, these assessment tools help in moving forward to constructions that have less economic, environmental and social impacts. At present, there are numerous assessment tools and methods with different approaches and scopes that have been analyzed in numerous technical reviews. However, there is no agreement about which method should be used for each evaluation case. This research paper synthetically analyzes the main sustainability assessment methods for the construction sector, comparing their strengths and weaknesses in order to present the challenges of the Spanish Integrated Value Model for Sustainability Assessment (MIVES. MIVES is a Multi-Criteria Decision Making method based on the value function concept and the Seminars of experts. Then, this article analyzes MIVES advantages and weak points by going through its methodology and two representative applications. At the end, the area of application of MIVES is described in detail along with the general application cases of the main types of assessment tools and methods.

  12. Civil-engineering work for Linac 4 and related roadworks - information for drivers

    CERN Multimedia

    TS Department

    2008-01-01

    The civil-engineering work for the construction of the Linac 4 accelerator will start on 22 October on the Mont Citron, the mound just opposite Restaurant No. 2 between the Computer Centre and the PS complex. Initially the work will involve excavating the mound and transporting the spoil to the area in front of Building SM18. This first phase of work will last for about five months until April 2009. The large number of lorries will cause disruption to traffic on the Route Rutherford, part of the Route Einstein and in the transfer tunnel between the two sites. Traffic lights for alternating traffic will be in operation at each end of the tunnel since there is insufficient room for two lorries travelling in opposite directions to use it at the same time. Consequently, users are strongly recommended not to use the tunnel except for transporting equipment between the two sites. Users not transporting equipment are strongly recommended to use Gates A and B. In parallel, a temporary roundabout will be installed ...

  13. Topographical surveys: Classical method versus 3D laser scanning. Case study - An application in civil engineering

    Science.gov (United States)

    Grigoraş, I.-R.; Covăsnianu, A.; Pleşu, G.; Benedict, B.

    2009-04-01

    The paper describes an experiment which took place in Iasi town, Romania, consisted in two different topographical survey techniques applied for one and the same objective placed in a block within the city (western part) - a thermal power station. The purpose was to compare those methods and to determine which one is proper to be used in this domain in terms of fastness, optimization and speed of data processing. First technique applied for our survey was the classical one, with a total station. Using the CAD technique, we obtained a final product (a dwg file) and a list of coordinates (a text file). The second method, which we focused our attention more, was the measurement with a very precise 3D laser scanstation, also very suitable in archeology. The data obtained were processed with special software. Result was a 3D model of the thermal power plant composed of measurable cloud point data. Finally, analyzing the advantages and disadvantages of each method, we came to the conclusion that the 3D laser scanning which we used matches well the application, in this case civil engineering, but the future of accepting and implementing this technique is in the hands of Romanian authorities.

  14. Mechanically activated fly ash as a high performance binder for civil engineering

    Science.gov (United States)

    Rieger, D.; Kullová, L.; Čekalová, M.; Novotný, P.; Pola, M.

    2017-01-01

    This study is aimed for investigation of fly ash binder with suitable properties for civil engineering needs. The fly ash from Czech brown coal power plant Prunerov II was used and mechanically activated to achieve suitable particle size for alkaline activation of hardening process. This process is driven by dissolution of aluminosilicate content of fly ash and by subsequent development of inorganic polymeric network called geopolymer. Hardening kinetics at 25 and 30 °C were measured by strain controlled small amplitude oscillatory rheometry with strain of 0.01 % and microstructure of hardened binder was evaluated by scanning electron microscopy. Strength development of hardened binder was investigated according to compressional and flexural strength for a period of 180 days. Our investigation finds out, that mechanically activated fly ash can be comparable to metakaolin geopolymers, according to setting time and mechanical parameters even at room temperature curing. Moreover, on the bases of long time strength development, achieved compressional strength of 134.5 after 180 days is comparable to performance of high grade Portland cement concretes.

  15. Development and evaluation of a long range image-based monitoring system for civil engineering structures

    Science.gov (United States)

    Ehrhart, Matthias; Lienhart, Werner

    2015-04-01

    Today, many large-scale civil engineering structures are permanently monitored to provide early warnings and to initiate counter actions from structural failure. Total station measurements are commonly used to determine 3D movements of selected points with measurement intervals of several minutes or hours. However, these measurements do not provide information on the vibration behavior of the structures. For this purpose, other sensors like accelerometers have to be installed on the object. In this paper, we present a monitoring system based on a state of the art image assisted total station (IATS) suitable for the measurement of absolute 3D coordinates and the determination of the structure's natural frequencies. The 3D coordinates can be determined with an accuracy of a few millimeters using conventional total station measurements. For analyzing the structure's natural frequencies, the telescope camera of the IATS is used in combination with dedicated image processing techniques optimized for artificial and natural targets. While the determination of 3D coordinates based on total station measurements is common practice, the idea of using the total station's image data for frequency analysis is new. Consequently, investigations on the achievable performance are pending for commercially available products. We therefore evaluate the potential of this technique at a life-size footbridge by comparison with accelerometer measurements. We demonstrate that with our developed monitoring concept and state of the art hardware, accelerometer measurements can be replaced in several monitoring situations by IATS measurements and image processing techniques.

  16. Collaborative Project-Based Learning of Environments Programming From Civil Engineering Projects

    Directory of Open Access Journals (Sweden)

    Rodrigo Fernando Herrera

    2017-04-01

    Full Text Available The objective of this research is to present and support the implementation of a teaching methodology based on active learning in a programming course taught to students of the first year of the civil engineering career. The active learning techniques used are project-based learning and collaborative learning. The research methodology is the study of three cases. The application of this methodology is supported by the increase in the percentages of achievement of the learning results obtained by the students of the same course in which this methodology was implemented (academic year 2015, to the detriment of students where a traditional methodology of teaching was applied (academic year 2013-2014. To evaluate the achievement, formative and summative evaluations were used by the teaching staff (heteroevaluation, and a self-assessment was implemented at the end of the course as well. From the obtained results it is evident that, when applying an active methodology, the students increase their achievement in each learning result; they reduce the gap between their perception of what is learned and the evaluation of teachers; and they improve their attitudinal skills (self-learning, teamwork, development and presentation of reports, among other benefits.

  17. COST Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar": ongoing research activities and third-year results

    Science.gov (United States)

    Pajewski, Lara; Benedetto, Andrea; Loizos, Andreas; Tosti, Fabio

    2016-04-01

    This work aims at disseminating the ongoing research activities and third-year results of the COST (European COoperation in Science and Technology) Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar." About 350 experts are participating to the Action, from 28 COST Countries (Austria, Belgium, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Ireland, Italy, Latvia, Malta, Macedonia, The Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, United Kingdom), and from Albania, Armenia, Australia, Colombia, Egypt, Hong Kong, Jordan, Israel, Philippines, Russia, Rwanda, Ukraine, and United States of America. In September 2014, TU1208 has been recognised among the running Actions as "COST Success Story" ("The Cities of Tomorrow: The Challenges of Horizon 2020," September 17-19, 2014, Torino, IT - A COST strategic workshop on the development and needs of the European cities). The principal goal of the COST Action TU1208 is to exchange and increase scientific-technical knowledge and experience of GPR techniques in civil engineering, whilst simultaneously promoting throughout Europe the effective use of this safe and non-destructive technique in the monitoring of infrastructures and structures. Moreover, the Action is oriented to the following specific objectives and expected deliverables: (i) coordinating European scientists to highlight problems, merits and limits of current GPR systems; (ii) developing innovative protocols and guidelines, which will be published in a handbook and constitute a basis for European standards, for an effective GPR application in civil- engineering tasks; safety, economic and financial criteria will be integrated within the protocols; (iii) integrating competences for the improvement and merging of electromagnetic scattering techniques and of data- processing techniques; this will lead to a novel freeware tool for the localization of

  18. Current State of Numerical Simulations and Testing for the Blast and Impact Protection of the Build Civil Engineering Infrastructure

    Institute of Scientific and Technical Information of China (English)

    GEBBEKEN Norbert

    2006-01-01

    The identification of the critical infrastructure has shown that the build civil engineering infrastructure is almost involved everywhere,even with the IT-infrastructure.Therefore,the passive safety of structures is demanded.Security associations have analysed that most assaults came along with explosion and impact scenarios,which amount in 80% of assaults.Consequently,these are the extraordinary loads the structures have to be planned and designed for.To carry out such an engineering job,the engineer has to be educated in multiple disciplines as physics,material science,continuum mechanics,numerical mechanics,testing,structural engineering and related specific fields as wave propagation etc.In this paper we will concentrate on the subjects of numerical simulation and testing.

  19. Civil Engineering Applications of Ground Penetrating Radar Recent Advances @ the ELEDIA Research Center

    Science.gov (United States)

    Salucci, Marco; Tenuti, Lorenza; Nardin, Cristina; Oliveri, Giacomo; Viani, Federico; Rocca, Paolo; Massa, Andrea

    2014-05-01

    The application of non-destructive testing and evaluation (NDT/NDE) methodologies in civil engineering has raised a growing interest during the last years because of its potential impact in several different scenarios. As a consequence, Ground Penetrating Radar (GPR) technologies have been widely adopted as an instrument for the inspection of the structural stability of buildings and for the detection of cracks and voids. In this framework, the development and validation of GPR algorithms and methodologies represents one of the most active research areas within the ELEDIA Research Center of the University of Trento. More in detail, great efforts have been devoted towards the development of inversion techniques based on the integration of deterministic and stochastic search algorithms with multi-focusing strategies. These approaches proved to be effective in mitigating the effects of both nonlinearity and ill-posedness of microwave imaging problems, which represent the well-known issues arising in GPR inverse scattering formulations. More in detail, a regularized multi-resolution approach based on the Inexact Newton Method (INM) has been recently applied to subsurface prospecting, showing a remarkable advantage over a single-resolution implementation [1]. Moreover, the use of multi-frequency or frequency-hopping strategies to exploit the information coming from GPR data collected in time domain and transformed into its frequency components has been proposed as well. In this framework, the effectiveness of the multi-resolution multi-frequency techniques has been proven on synthetic data generated with numerical models such as GprMax [2]. The application of inversion algorithms based on Bayesian Compressive Sampling (BCS) [3][4] to GPR is currently under investigation, as well, in order to exploit their capability to provide satisfactory reconstructions in presence of single and multiple sparse scatterers [3][4]. Furthermore, multi-scaling approaches exploiting level

  20. Potential contribution of materials investigations in reducing the risks of unavailability of nuclear civil engineering infrastructures

    Energy Technology Data Exchange (ETDEWEB)

    Goy, R.; Gaine, C.; Cornish-Bowden, I.; Auge, L.; Thillard, G.; Capra, B. [Oxand (France)

    2011-07-01

    Many consulting assignments undertaken by Oxand within the framework of life-cycle management of existing nuclear civil engineering structures, relied on taking into account the structure's level of deterioration, the quantitative estimate of its residual strength capacity and the future progression of this capacity over time. The developments of structure assessment techniques allow more and more the integration of the real state of the existing structure by enhancing the value of measures and investigations carried out on structures. On one hand, this information allows to take into account the structure's ageing and therefore estimate the residual resistance and reliability. On the other hand, by investigating the real properties of the structure and of its operation, refined calculations can sometimes highlight a resistance margin of the structure 'such as built' higher than the one considered during design. The precision on the 'real' reliability of the structure allows to refine its management and thus to optimize the infrastructure's performance. Developments of assessment methods are increasingly oriented toward probabilistic approaches. Although they go out of the 'classical regulatory' framework, they bring precision on the 'real' reliability of the structure. Using higher assessment levels needs to have more important and precise input data, what can lead to the need to carry out more detailed investigations. However, these methods offer interesting ways, which can provide, in certain cases, useful additional information for the decision-making of actions to be engaged. The methodology is illustrated with the case of a network of reinforced concrete beams, which are subjected to a rapid increase in their mechanical stresses. In particular this example shows that investigations on the real performances of materials can provided a significant contribution in managing the risks of unavailability

  1. Non destructive characterization of cracks in concrete by ultrasonic auscultation of civil engineering structures

    Energy Technology Data Exchange (ETDEWEB)

    Quiviger, A.; Payan, C.; Chaix, J.F.; Zardan, J.P.; Garnier, V. [EDF, LCND (France); Salin, J. [EDF Paris (France)

    2011-07-01

    Concrete Non Destructive Characterisation is one of the important issues to evaluate the life duration in the present and future civil engineering structures. The damaging modes of the structures often imply the phases of the appearance and after growth of the cracks. We have to detect, identify and characterize them. The characterization result must lead to a diagnosis of the criticality of a crack regarding to the integrity of the structure and its ability to fulfill its function. The Non Destructive Evaluation techniques are numerous but the ultrasonic ones are able to give an answer to both the characterization and the follow-up of the defect on site. Yet if this method is potentially relevant to detect and identify the cracks in the concrete, we have today a certain amount of locks to remove in order to offer robust and reproducible industrial solutions. These locks range from research points like the description of the real propagation of linear or non linear ultrasonic waves in a heterogeneous material, to more industrial concepts such as the development of devices designed to be applied in the concrete control. For this purpose, we present our latest works on this topic. We develop an overview of the problem: first, to extract the most important theoretical solutions to analyse an unstopping and closed crack in concrete with an only one face access. Then we suggest a methodology to apply one of these solutions on site. A first step of this work after having chosen a solution is to check the ability of the technique to detect a crack, and its sensitivity to the length, depth and opening of the crack. We have developed an experimental plan based on theoretical concept to compare the linear and non linear survey on a set of specimens composed of concrete beams cracked to different depths. We describe the devices and give the latest results. The non linear technique is able to extract information on the size of the cracks. It is an important step to progress in

  2. Philadelphia's Parkway Program: An Evaluation.

    Science.gov (United States)

    Wofford, Joan; Ross, Joanne

    The Parkway Program is the prototype school-without-walls created by the School District of Philadelphia in 1967. The program presently consists of four units of approximately 200 students (chosen by lottery from throughout the city), ten teachers, ten to 12 interns, and a Unit Head and administrative assistant housed in four separate non-school…

  3. Civil engineering project construction in the concrete construction technical analysis%土建施工中混凝土施工技术分析

    Institute of Scientific and Technical Information of China (English)

    谢超禄

    2014-01-01

    土建项目工程不同于其它项目工程的是,它涉及面广、专业多、工程复杂,在土建工程建设中,混凝土施工是被广泛应用的施工方式[1]。混凝土施工技术的好坏直接决定着土建工程项目质量。本文结合一线施工经验,对土建施工建设中的混凝土施工技术做出简要分析,以期待能够为一线土建混凝土有效施工提供参考。%Civil engineering is different from other projects,it is broad,more professional,engineering complex, in the construction of civil engineering,concrete construction is a widely used way of construction.Concrete construction technology is good or bad directly decides the quality of civil engineering projects.At this point,in this paper,the author combined with a line of construction experience,to make a brief analysis of civil engineering construction in the concrete construction technology,hoping to provide reference for civil engineering concrete construction.

  4. How Much Is Enough? Examining Computer Science and Civil Engineering Citation Data to Inform Collection Development and Retention Decisions in Three Large Canadian University Libraries

    Science.gov (United States)

    Spence, Michelle; Mawhinney, Tara; Barsky, Eugene

    2012-01-01

    Science and engineering libraries have an important role to play in preserving the intellectual content in research areas of the departments they serve. This study employs bibliographic data from the Web of Science database to examine how much research material is required to cover 90% of faculty citations in civil engineering and computer…

  5. COST Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar:" ongoing research activities and mid-term results

    Science.gov (United States)

    Pajewski, Lara; Benedetto, Andrea; Loizos, Andreas; Slob, Evert; Tosti, Fabio

    2015-04-01

    This work aims at presenting the ongoing activities and mid-term results of the COST (European COoperation in Science and Technology) Action TU1208 'Civil Engineering Applications of Ground Penetrating Radar.' Almost three hundreds experts are participating to the Action, from 28 COST Countries (Austria, Belgium, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Ireland, Italy, Latvia, Malta, Macedonia, The Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, United Kingdom), and from Albania, Armenia, Australia, Egypt, Hong Kong, Jordan, Israel, Philippines, Russia, Rwanda, Ukraine, and United States of America. In September 2014, TU1208 has been praised among the running Actions as 'COST Success Story' ('The Cities of Tomorrow: The Challenges of Horizon 2020,' September 17-19, 2014, Torino, IT - A COST strategic workshop on the development and needs of the European cities). The principal goal of the COST Action TU1208 is to exchange and increase scientific-technical knowledge and experience of GPR techniques in civil engineering, whilst simultaneously promoting throughout Europe the effective use of this safe and non-destructive technique in the monitoring of infrastructures and structures. Moreover, the Action is oriented to the following specific objectives and expected deliverables: (i) coordinating European scientists to highlight problems, merits and limits of current GPR systems; (ii) developing innovative protocols and guidelines, which will be published in a handbook and constitute a basis for European standards, for an effective GPR application in civil- engineering tasks; safety, economic and financial criteria will be integrated within the protocols; (iii) integrating competences for the improvement and merging of electromagnetic scattering techniques and of data- processing techniques; this will lead to a novel freeware tool for the localization of buried objects

  6. Construction Schedule Risk Factors Analysis and Judgment of Civil Engineering%土木工程施工进度风险因素分析与判断

    Institute of Scientific and Technical Information of China (English)

    赵春安; 赵剑

    2013-01-01

    随着我国经济的飞速发展,土木工程施工建设占有的位置越来越重要。其中土木工程施工进度风险是土木工程施工的重要影响因素。本文通过对土木工程施工进度风险影响因素的分析,提出一些关于控制土木工程施工进度风险因素的意见。%With the rapid development of our economy, civil engineering construction occupies the more and more impor-tant position. The civil engineering construction schedule risk is an important factor in the civil engineering construction. Th-is paper through the analysis of affecting risk factors on civil engineering construction schedule puts forward some factors to control the risk of civil engineering construction schedule.

  7. COST Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar": first-year activities and results

    Science.gov (United States)

    Pajewski, Lara; Benedetto, Andrea; Loizos, Andreas; Slob, Evert; Tosti, Fabio

    2014-05-01

    This work aims at presenting the first-year activities and results of COST (European COoperation in Science and Technology) Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar". This Action was launched in April 2013 and will last four years. The principal aim of COST Action TU1208 is to exchange and increase scientific-technical knowledge and experience of GPR techniques in civil engineering, whilst simultaneously promoting throughout Europe the effective use of this safe and non-destructive technique in the monitoring of infrastructures and structures. Moreover, the Action is oriented to the following specific objectives and expected deliverables: (i) coordinating European scientists to highlight problems, merits and limits of current GPR systems; (ii) developing innovative protocols and guidelines, which will be published in a handbook and constitute a basis for European standards, for an effective GPR application in civil- engineering tasks; safety, economic and financial criteria will be integrated within the protocols; (iii) integrating competences for the improvement and merging of electromagnetic scattering techniques and of data- processing techniques; this will lead to a novel freeware tool for the localization of buried objects, shape-reconstruction and estimation of geophysical parameters useful for civil engineering needs; (iv) networking for the design, realization and optimization of innovative GPR equipment; (v) comparing GPR with different NDT techniques, such as ultrasonic, radiographic, liquid-penetrant, magnetic-particle, acoustic-emission and eddy-current testing; (vi) comparing GPR technology and methodology used in civil engineering with those used in other fields; (vii) promotion of a more widespread, advanced and efficient use of GPR in civil engineering; and (viii) organization of a high-level modular training program for GPR European users. Four Working Groups (WGs) carry out the research activities. The first WG

  8. Inquiry on civil construction technology points of building engineering%建筑工程土建施工技术要点探究

    Institute of Scientific and Technical Information of China (English)

    赵成学

    2015-01-01

    依照建筑工程土建的施工要求,简单的总结了建筑工程土建施工的关键技术要点,主要包括混凝土施工、钢筋施工、砖砌筑施工、防水施工、模板施工五方面内容,以期达到提升建筑工程土建施工技术性能的目的。%According to civil construction demands of building engineering,the paper briefly summarizes critical civil construction technology points of building engineering,which mainly includes concrete construction,steel construction,brick masonry construction,waterproofing construc-tion and template construction,with a view to achieve the goal of improving civil construction technology performance of building engineering.

  9. TECHNICAL SOLUTIONS TO CREATE ESTHETICAL CIVIL ENGINEERING STRUCTURES USING THE GEOSYNTHETICS MATERIALS

    Directory of Open Access Journals (Sweden)

    Teodor Eugen Man

    2010-01-01

    Full Text Available Geosynthetics is the term used to describe a range of generally polymeric products used to solve some civil engineeringproblems. The term is generally regarded to encompass eight main product categories: geotextiles, geogrids, geonets,geomembranes, geosynthetic clay liners, geofoam, geocells (cellular confinement and geocomposites. The syntheticpolymeric nature of these products makes them suitable for use in the ground where high levels of durability arerequired. Not only because, properly formulated, they can also be used in exposed applications. Geosynthetics areavailable in a wide range of forms and materials, each to suit a slightly different end use. These products have a widerange of applications and are currently used in many civil, geotechnical, transportation, geoenvironmental, hydraulic,and private development applications including roads, airfields, railroads, embankments, retaining structures,reservoirs, canals, dams, erosion control, sediment control, landfill liners, landfill covers, mining, aquaculture andagriculture. The paper presents basic aspects of geotextiles, drainage, geocomposite designissues and technicalsolutions of their use.

  10. News in engineering education in Spain effective from 2010 in presence of external changes and mixed crisis, looking mostly to agro and civil engineers

    Science.gov (United States)

    Anton, J. M.; Sanchez, M. E.; Grau, J. B.; Andina, D.

    2012-04-01

    The engineering careers models were diverse in Europe, and are adopting now in Spain the Bolonia process for European Universities. Separated from older Universities, that are in part technically active, Civil Engineering (Caminos, Canales y Puertos) started at end of 18th century in Spain adopting the French models of Upper Schools for state civil servants with exam at entry. After 1800 intense wars, to conserve forest regions Ingenieros de Montes appeared as Upper School, and in 1855 also the Ingenieros Agrónomos to push up related techniques and practices. Other Engineers appeared as Upper Schools but more towards private factories. These ES got all adapted Lower Schools of Ingeniero Tecnico. Recently both grew much in number and evolved, linked also to recognized Professions. Spanish society, into European Community, evolved across year 2000, in part highly well, but with severe discordances, that caused severe youth unemployment with 2008-2011 crisis. With Bolonia process high formal changes step in from 2010-11, accepted with intense adaptation. The Lower Schools are changing towards the Upper Schools, and both that have shifted since 2010-11 various 4-years careers (Grado), some included into the precedent Professions, and diverse Masters. Acceptation of them to get students has started relatively well, and will evolve, and acceptation of new grades for employment in Spain, Europe or outside will be essential. Each Grado has now quite rigid curricula and programs, MOODLE was introduced to connect pupils, some specific uses of Personal Computers are taught in each subject. Escuela de Agronomos centre, reorganized with its old name in its precedent buildings at entrance of Campus Moncloa, offers Grados of Agronomic Engineering and Science for various public and private activities for agriculture, Alimentary Engineering for alimentary activities and control, Agro-Environmental Engineering more related to environment activities, and in part Biotechnology also

  11. Sustainable Development Strategy of Civil Engineering%土木工程可持续发展战略浅析

    Institute of Scientific and Technical Information of China (English)

    杨跃

    2013-01-01

      伴随着社会经济的发展,现代科学日益进步,土木工程得到了长足的发展,在快速的发展过程中,不可避免的对经济发展环境造成了相当大的影响。通过对土木工程发展的审视,我们发现,我们正面临着一个伴随着国民经济飞跃的土木工程大发展的大好时期。而且这样一个优良的发展环境已经受到并将继续受到世界所有国家的关注。但是我们需要注意的是要实现人类同环境的协调发展,创造美好家,就要走可持续发展的道路。随着国家对以基础设施建设力度的加大,工业与民用建筑,矿山建设,公路建设得到迅猛发展,造成的对环境的影响越来越受到社会的关注。基础建设对社会和经济的发展有着非常重要的带动作用,但它同时产生对破坏环境产生严重影响。此,如何在土木工程建设发展的同时,保护生态环境,节约土地,并处理好同社会、经济的关系,进而实现可持续发展,是一个值得我们仔细研究的课题。%With the social and economic development and modern science and technology increasingly advanced, civil engineering has been considerable development. In the process of rapid development, it is inevitable to bring huge influence on the environment of economic development. Through reviewing the development of civil engineering, we find that now it is a good time that the civil engineering develops with the development of national economy. The good development environment has attracted the attention from the globe. To realize the harmonious development of human being and environment and build beautiful homes, we should adhere to the path of sustainable development. With the increase of the state of infrastructure construction, industrial and civil construction, mine construction, and highway construction has obtained the rapid development, the impact on the environment attracts more and more

  12. On the Present Situation and Prospects of Civil Engineering%试论土木工程的现状与前景

    Institute of Scientific and Technical Information of China (English)

    宋海军

    2013-01-01

    This paper analyzes the achievements of current civil engineering construction over the years in China and makes in-depth study on the building materials, structure type, design theory and other aspects of current industry. On this basis, the author proposes the views on the future trends of the civil engineering industry as well as the development and application of emerging technologies. Civil Engineering is one of the oldest subjects, to understand its history and current development status allows us to better learn the civil engineering. This paper makes civil-depth understanding of the development status of civil engineering and expected the future development trend.%本文分析了当前我国多年来在土木工程建设方面的成就并对当前行业内的建筑材料、结构型式、设计理论等各个方面进行深入研究。在此基础之上对土木工程行业未来发展趋势以及行业内新兴技术的开发与应用提出了自己的见解。土木工程是一门古老的学科,了解它的发展历程和现状可以让我们更好的学好土木工程专业。本文就土木工程的发展现状进行深入的了解,并大胆预想土木工程的未来发展趋势。

  13. Re-engineering organizations for optimal deployment of smart materials and intelligent devices in civil infrastructure

    Science.gov (United States)

    El-Diraby, Tamer E.; Beheshti, Arzhang

    2002-06-01

    Smart materials and intelligent devices are promising to revolutionize data collection in civil infrastructure. However, their application has so far been very limited in scope. So far, there is no comprehensive mechanisms to integrate data generated by smart materials and intelligent devices into the overall IT systems of user organizations. This article outlines a framework for reengineering organizations for optimal utilization of smart materials and intelligent devices in the infrastructure development domain. The aim is to integrate data collection and management into the organizational culture. The framework includes three basic modules: assessing current practice, identifying level of deployment, and defining the needed actions.

  14. Passive, Active and Semi-Active Control Systems in Civil Engineering

    Directory of Open Access Journals (Sweden)

    Septimiu-George Luca

    2005-01-01

    Full Text Available In the recent years many techniques has been developed to reduce the vibration response in civil structure, such as tall buildings and long bridges. Attention of this paper is focused on the difference among passive, active and semi-active control systems. If passive control systems are used enhancing structural damping, stiffness or strength, the other control techniques employ controllable forces to add or dissipate, or both, energy in a structure due to the specific devices integrated with sensors, controllers and real-time processes to operating. Some applications will be proposed and applied to single degree of freedom systems in vertical working conditions.

  15. Development of an Organizational Effectiveness Model for Base Level Civil Engineering Organizations.

    Science.gov (United States)

    1983-09-01

    engineering organizations. Content analysis was first used extensively during World War II ( Demidovich , 1983). It is a less mathematically rigorous... Demidovich , J. W. Comments on creativity made in an address to graduate engineering management students of the School of Systems and Logistics, AFIT

  16. Use of the Colorado SURGE System for Continuing Education for Civil Engineers.

    Science.gov (United States)

    Fead, J. W. N.

    The Colorado State University Resources in Graduate Education (SURGE) program is described in this report. Since it is expected that not all the participants in a graduate engineering program will be able to attend university-based lectures, presentations are video-taped and transported to industrial plants, engineering offices, and other…

  17. Successfully Managing the Experimental Area of a Large Physics Experiment from Civil Engineering to the First Beams

    CERN Document Server

    Butin, F

    2010-01-01

    The role of "Experimental Area Manager" supported by a well organized, charismatic and motivated team is absolutely essential for managing the huge effort needed for a multi-cultural, multi-disciplinary installation of cathedral-size underground caverns housing a billion dollar physics experiment. Between the years 2002 and 2008, we supervised and coordinated the ATLAS work site at LHC, from the end of the civil engineering to the first circulating beams, culminating with 240 workers on the site, 24 hours a day, 7 days a week, with activities taking place simultaneously on the surface, in the 60 m shafts and in the 100 m underground experimental cavern. We depict the activities preparation scheme (including tasks ranging from the installation of 280 ton cranes to super-delicate silicon detectors), the work-site organization method, the safety management that was a top priority throughout the whole project, and the opencommunication strategy that required maintaining permanent public visits. The accumulation o...

  18. Analysis of the Electromechanical Installation Cooperate with the Civil Engineering Construction%机电安装与土建施工配合分析

    Institute of Scientific and Technical Information of China (English)

    肖庆丰

    2014-01-01

    In the process of management the construction eng-ineering project, people must pay at ention to the management and coordination of electromechanical engineering cooperates with civil engineering construction. In this article, the author combines with the project example of green land square in a city and briefly analyzes and discusses to the coordination ma-nagement of electromechanical instal ation and civil enginee-ring construction.%在管理建筑工程项目的过程中,必须重视机电工程和土建施工配合的管理以及协调。本文结合某市绿地广场工程实例,对建筑工程机电安装与土建施工的协调管理进行了浅要的分析与探讨。

  19. The implementation of a multimedia learning environment for graduate civil engineers

    OpenAIRE

    Smith, Chris; Jagodzinski, Peter

    2011-01-01

    Underlying our approach to the development of a Multimedia Learning Environment (MLE) is the proposition that conventional learning needs analysis, for Computer-Based Learning does not address the richness of delivery possible with MLEs. We propose that knowledge-engineering techniques (from the field of Artificial Intelligence) can provide a richer understanding of the domain, thus enabling a better MLE to be produced. The knowledge-engineering approach we have used, outlined in this paper, ...

  20. Perceptions of Academic Staff towards Accommodating Students with Disabilities in a Civil Engineering Undergraduate Program in a University in South Africa

    Science.gov (United States)

    Mayat, Nafisa; Amosun, Seyi Ladele

    2011-01-01

    This study explored the perceptions of academic staff towards admission of students with disabilities, and their accommodation once accepted into an undergraduate Civil Engineering program in a South African university. Qualitative responses relating to the perceptions of five academic staff were obtained through semi-structured interviews. The…

  1. Point 5 - civil engineering : SX5, SX, travelling cranes, trucks, CMS modules, surface views, pit PX

    CERN Multimedia

    1995-01-01

    > de 00:00 à 14:00 le 09 décembre 1995 Forage et carottage du sous-sol pour connaître l’état du terrain pour les futurs travaux souterrains de Génie Civil > de 14:01 à 19:15mn le 03 février 1997 Sondage et carottage dans le tunnel LEP/LHC vers le point2 > de 19 :16 à 38 :00mn le 13 juin 1997 Construction d’une galerie souterraine de liaison et du nouveau bâtiment de ventilation SU ?? sur le site du Point5 Vues du point5 avant l’agrandissement du site pour CMS

  2. MULTIMEDIA TECHNOLOGIES FOR TRAINING FOR "DESCRIPTIVE GEOMETRY AND ENGINEERING GRAPHICS" COURSE FOR STUDENTS OF THE FACULTY OF CIVIL ENGINEERING IN KUBGAU

    Directory of Open Access Journals (Sweden)

    Serga G. V.

    2015-03-01

    Full Text Available The article examines the teaching descriptive geometry and engineering graphics on Faculty of Civil Engineering, higher-motivation of students to obtain needed competence to adopt competently compensation-drawings. The article describes the basic methods of conducting classes on the subject "Descriptive Geometry and Engineering Graphics" for students enrolled in the specialty 08.05.01 "Construction of unique buildings and structures." For lectures and laboratory classes in the department of descriptive geometry and graphics were developed multimedia courses with animation for all studied subjects, educational presentations that reveal the specifics of the discipline into account peculiarities of the educational process of learning in the Kuban State Agricultural university. Multimedia courses using enables us to model a situation that forces students to analyze, compare the solves of the task. Students develop an algorithmic way of thinking, formed the ability to think and act optimally variability. The use of multimedia development at the Department of Descriptive Geometry and Graphics showed an increase of performance results compared to the previous years of employment without presentation. It indicates that the use of multimedia lectures and laboratory exercises improves the efficiency and quality of education, as well as gives an opportunity to a greater extent to explain the learning material for students

  3. 工程教育背景下土木工程专业设计类课程探讨%Study on engineering design curriculums in civil engineering based-on engineering education

    Institute of Scientific and Technical Information of China (English)

    蔡靖; 赵方冉

    2012-01-01

    Based on the engineering education, five reform measures aiming at engineering design curriculums in civil engineering are proposed. They are setting up introductory lectures about engineering design curriculums, core knowledge integration, connection of practice curriculums, abiding by specifications and inspiring innovation and establishment of the curriculum group.%在工程教育背景下,针对土木工程建筑工程方向的工程设计类课程提出5项改革措施:开设专业设计类课程导论讲座,整合核心知识点,集中实践课程承上启下,遵循规范、鼓励创新,成立工程设计类课程小组.

  4. COST Action TU1208 - Working Group 1 - Design and realisation of Ground Penetrating Radar equipment for civil engineering applications

    Science.gov (United States)

    Pajewski, Lara; Benedetto, Andrea; D'Amico, Sebastiano; Ferrara, Vincenzo; Frezza, Fabrizio; Persico, Raffaele; Tosti, Fabio

    2017-04-01

    This work aims at presenting the main results achieved by Working Group (WG) 1 "Novel Ground Penetrating Radar instrumentation" of the COST (European COoperation in Science and Technology) Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar" (www.cost.eu, www.GPRadar.eu). The principal goal of the Action, which started in April 2013 and is ending in October 2017, is to exchange and increase scientific-technical knowledge and experience of Ground Penetrating Radar techniques in civil engineering, whilst promoting throughout Europe the effective use of this safe non-destructive technique. The Action involves more than 300 Members from 28 COST Countries, a Cooperating State, 6 Near Neighbour Countries and 6 International Partner Countries. The most interesting achievements of WG1 include: 1. The state of the art on GPR systems and antennas was composed; merits and limits of current GPR systems in civil engineering applications were highlighted and open issues were identified. 2. The Action investigated the new challenge of inferring mechanical (strength and deformation) properties of flexible pavement from electromagnetic data. A semi-empirical method was developed by an Italian research team and tested over an Italian test site: a good agreement was found between the values measured by using a light falling weight deflectometer (LFWD) and the values estimated by using the proposed semi-empirical method, thereby showing great promises for large-scale mechanical inspections of pavements using GPR. Subsequently, the method was tested on a real scale, on an Italian road in the countryside: again, a good agreement between LFWD and GPR data was achieved. As a third step, the method was tested at larger scale, over three different road sections within the districts of Madrid and Guadalajara, in Spain: GPR surveys were carried out at the speed of traffic for a total of 39 kilometers, approximately; results were collected by using different GPR antennas

  5. A Brief Discuss on the Application of Calculus in Civil Engineering%浅谈微积分在土木工程上的应用

    Institute of Scientific and Technical Information of China (English)

    蔡颢

    2012-01-01

    In this Article, Based on briefly introduced the basic knowledge ofthe two disciplines of "calculus" and "civil en- gineering", comprehensive analysis of the intrinsic link between the two, and proposed the main application of the calculus in civil engineering subject area.%文章在简要介绍了微积分和土木工程两个学科基本知识的基础上,全面分析了两者的内在联系,并提出了微积分在土木工程学科领域的主要方面应用。

  6. A comparative study of oral health attitudes and behavior using the Hiroshima University-Dental Behavioral Inventory (HU-DBI) between dental and civil engineering students in Colombia.

    Science.gov (United States)

    Jaramillo, Jorge A; Jaramillo, Fredy; Kador, Itzjak; Masuoka, David; Tong, Liyue; Ahn, Chul; Komabayashi, Takashi

    2013-03-01

    The aim of this study was to use the Hiroshima University - Dental Behavioral Inventory (HU-DBI) to compare oral health attitudes and behavior of dental and civil engineering students in Colombia. The HU-DBI's survey consisting of twenty dichotomous responses (agree-disagree) regarding tooth brushing, was completed at University Antonio Narino for the dental students and the University of Cauca for the civil engineering students. The Spanish version of the HU-DBI questionnaire was taken by 182 of 247 dental students and 411 of 762 engineering students. The data was-statistically analyzed by the chi-square test and backward logistic regression. Compared to the engineering students, the dental students were more likely to agree with questions such as "I am bothered by the color of my gums"(OR = 2.2, 95% CI: 1.3-3.7),"I think I can clean my teeth well without using toothpaste" (OR = 3.0, 95% CI: 1.5-5.9), "I have used a dye to see how clean my teeth are" (OR = 2.9, 95% CI: 1.9-4.3), and "I have had my dentist tell me that I brush very well" (OR = 2.0, 95% CI: 1.3-3.1). The dental education curriculum in a dental school compared to a civil engineering school in Colombia indicated that a three-phase curriculum in didactics and clinics increased oral health attitudes and behavior from entry to graduation.

  7. An Analysis to Determine the Management Training Requirements for Civil Engineering Superintendents and Foremen.

    Science.gov (United States)

    1985-09-01

    Demidovich , PhD Professor of Management Discipline Captain Benjamin L. Dilla, PhD Assistant Proffessor of Organizational Behavior J. Richardson Johnson, MS...Professor of Management Science John W. Demidovich , PhD Professor of Management 87 " "-Ř . .. -"’’"L...Professor of Management Science John W. Demidovich , PhD Professor of Management Supply Systems Major Timothy N. Beally, MS Instructor of Engineering

  8. The implementation of a multimedia learning environment for graduate civil engineers

    Directory of Open Access Journals (Sweden)

    Peter Jagodzinski

    1995-12-01

    Full Text Available Underlying our approach to the development of a Multimedia Learning Environment (MLE is the proposition that conventional learning needs analysis, for Computer-Based Learning does not address the richness of delivery possible with MLEs. We propose that knowledge-engineering techniques (from the field of Artificial Intelligence can provide a richer understanding of the domain, thus enabling a better MLE to be produced. The knowledge-engineering approach we have used, outlined in this paper, involved acquiring knowledge from a range of sources, then analysing this knowledge so that individual knowledge items could be categorized according to identified underlying knowledge-representation paradigms which each imply their own, most suitable, presentation style. This knowledge engineering analysis was then used to select an instructional model capable of conveying all the acquired types of knowledge in their paradigmatic styles, and detailed and adaptable enough to be implemented on a computer. The chosen model, the Cognitive Apprenticeship Model (CAM, was explicitly used as the basis for the architecture of the MLE.

  9. Stress Distribution of Holed Geotextile Cross-section in Civil Engineering

    Institute of Scientific and Technical Information of China (English)

    SHANG Xin-ping; CHU Cai-yuan

    2005-01-01

    Stress distribution of holed geotextile cross-section under uniaxial and double-axial tension is analyzed with the boundary element method (BEM). The calculation results indicate that stress distribution of holed geotextile crosssection is greatly related to the dimension of the specimen, the size of the hole, the shape of the hole and the tensile condition, and the stress concentration area of holed geotextile from the side of the hole to 3-4 times of the hole diameter should be strengthened in order to improve quality of the projects. These results could provide guidance for engineering application of geotextiles.

  10. Detecting steel rods and micro-piles: A case history in a civil engineering application

    Science.gov (United States)

    Orlando, Luciana

    2012-06-01

    Investigating engineered structures with GPR is challenging because quite often the scale of important features is similar or smaller that the natural scale of heterogeneity in the material. In this paper I summarize the key factors and use numerical simulations and real data examples to illustrate the tradeoff between detection and resolution. The targets were micro-piles and steel bars with diameters 0.13 m and 0.02 m, respectively, and embedded in an ancient wall that consists of an aggregate of stones ranging in size from 1 cm to half meter, mortar and air. The data were collected with center frequency antennas of 200, 600, 2000 MHz which provide increasing resolution. The model and measurement results indicate that lower resolution may result in a better understanding of the structure imaged with GPR. In fact, high resolution profiles show enhanced anomalies caused by heterogeneities in the host material, making data interpretation more difficult. This study shows that GPR survey design must be clear about the particular engineering objective and requires selecting the optimal frequency and bandwidth depending on the target dimension.

  11. STRATEGY FOR IMPROVEMENT OF SAFETY AND EFFICIENCY OF COMPUTER-AIDED DESIGN ANALYSIS OF CIVIL ENGINEERING STRUCTURES ON THE BASIS OF THE SYSTEM APPROACH

    Directory of Open Access Journals (Sweden)

    Zaikin Vladimir Genrikhovich

    2012-12-01

    Full Text Available The authors highlight three problems of the age of information technologies and proposes the strategy for their resolution in relation to the computer-aided design of civil engineering structures. The authors express their concerns in respect of globalization of software programmes designated for the analysis of civil engineering structures and employed outside of Russia. The problem of the poor quality of the input data has reached Russia. Lately, the rate of accidents of buildings and structures has been growing not only in Russia. Control over efficiency of design projects is hardly performed. This attitude should be changed. Development and introduction of CAD along with the application the efficient methods of projection of behaviour of building structures are in demand. Computer-aided calculations have the function of a logical nucleus, and they need proper control. The system approach to computer-aided calculations and technologies designated for the projection of accidents is formulated by the authors. Two tasks of the system approach and fundamentals of the strategy for its implementation are formulated. The study of cases of negative results of computer-aided design of engineering structures was performed and multi-component design patterns were developed. Conclusions concerning the results of researches aimed at regular and wide-scale implementation of the strategy fundamentals are formulated. Organizational and innovative actions concerning the projected behaviour of civil engineering structures proposed in the strategy are to facilitate: safety and reliability improvement of buildings and structures; saving of building materials and resources; improvement of labour efficiency of designers; modernization and improvement of accuracy of projected behaviour of buildings and building standards; closer ties between civil and building engineering researchers and construction companies; development of competitive environment to boost

  12. Application of a moment tensor inversion code developed for mining-induced seismicity to fracture monitoring of civil engineering materials

    Science.gov (United States)

    Linzer, Lindsay; Mhamdi, Lassaad; Schumacher, Thomas

    2015-01-01

    A moment tensor inversion (MTI) code originally developed to compute source mechanisms from mining-induced seismicity data is now being used in the laboratory in a civil engineering research environment. Quantitative seismology methods designed for geological environments are being tested with the aim of developing techniques to assess and monitor fracture processes in structural concrete members such as bridge girders. In this paper, we highlight aspects of the MTI_Toolbox programme that make it applicable to performing inversions on acoustic emission (AE) data recorded by networks of uniaxial sensors. The influence of the configuration of a seismic network on the conditioning of the least-squares system and subsequent moment tensor results for a real, 3-D network are compared to a hypothetical 2-D version of the same network. This comparative analysis is undertaken for different cases: for networks consisting entirely of triaxial or uniaxial sensors; for both P and S-waves, and for P-waves only. The aim is to guide the optimal design of sensor configurations where only uniaxial sensors can be installed. Finally, the findings of recent laboratory experiments where the MTI_Toolbox has been applied to a concrete beam test are presented and discussed.

  13. How to Align the University Curricula with the Market Demands by Developing Employability Skills in the Civil Engineering Sector

    Directory of Open Access Journals (Sweden)

    Livia Anastasiu

    2017-09-01

    Full Text Available The purpose of the research is to discover which employability skills may be developed by students from technical universities in order to meet market demands. Since graduates from technical universities face unemployment or over qualification for vacant jobs, we presumed that there is a misalignment between employers’ expectations concerning graduates’ skills and what they really get from school. Therefore, we conceived a questionnaire to see the demands of the business environment regarding graduates’ technical and professional skills. After analyzing the data, we proposed an interdisciplinary module system, where the mentors coming from the companies involved in the study teach voluntary or optional courses and applications in the domains where they have expertise. We used the employability skills model to find that mix of competencies that may help graduates find jobs in their field of knowledge. This innovative method serves universities, students and companies as well: the prestige of a university is quantified by the experts delivered into the labor market; companies will have well prepared employees in their specific area, with less costs; students will find jobs which will match their expectations, giving them motivation to perform. The limitation of the present research is that the study refers only to the Civil Engineering specialization of the Technical University Cluj-Napoca Romania.

  14. Proposal for the award of an industrial services contract for civil engineering superstructure and internal construction building work

    CERN Document Server

    2001-01-01

    This document concerns the award of an Industrial Services contract for civil engineering superstructure and internal construction building work. Following a market survey carried out among 112 firms in fifteen Member States, a call for tenders (IT-2546/ST/Rev.) was sent on 12 April 2001 to eleven consortia, four consisting of four firms, three consisting of three firms and four consisting of two firms, in seven Member States. By the closing date, CERN had received tenders from eight consortia in six Member States. The Finance Committee is invited to agree to the negotiation of a contract with the consortium SPIE CITRA SUD-EST(FR)-ANTIRUST TECHNOLOGY (GR), the lowest bidder, for an initial period of three years from 1 January 2002 for an amount not exceeding 15 375 000 Swiss francs, not subject to revision. The contract will include options for two one-year extensions beyond the initial three-year period. The consortium has indicated the following distribution by country of the contract value covered by this ...

  15. Experimental Investigation of the Effects of Reverse Bending and Straightening Process on Carbon Steel Bars used for Civil Engineering Applications

    Directory of Open Access Journals (Sweden)

    Adewole, K. K.

    2014-01-01

    Full Text Available This paper presents an experimental investigation of the effects of reverse bending and straightening process on the mechanical properties of a typical carbon steel bar used for civil engineering applications. Twenty four specimens each were used for the metallogarphy, microhardness and tensile tests. The investigation revealed that the reverse bending and straightening process has no significant effect on the bars’ through-thickness microstructure and hardness. However, the reverse bending and straightening process reduces the yield load, ultimate load, and displacement at fracture of the bars by 4.27%, 2.58%, and 18.62% respectively. These results highlight the need to take into consideration the effects of the previous loading history of the bars/wires, particularly the reduction in the displacement at fracture and consequently, the ductility of the bars/wires in the design and fitness for purpose assessment of components made from them, since the bars/wires could experience high strain during installation and in service due to overloads.

  16. Development of Rapid, Continuous Calibration Techniques and Implementation as a Prototype System for Civil Engineering Materials Evaluation

    Science.gov (United States)

    Scott, M. L.; Gagarin, N.; Mekemson, J. R.; Chintakunta, S. R.

    2011-06-01

    Until recently, civil engineering material calibration data could only be obtained from material sample cores or via time consuming, stationary calibration measurements in a limited number of locations. Calibration data are used to determine material propagation velocities of electromagnetic waves in test materials for use in layer thickness measurements and subsurface imaging. Limitations these calibration methods impose have been a significant impediment to broader use of nondestructive evaluation methods such as ground-penetrating radar (GPR). In 2006, a new rapid, continuous calibration approach was designed using simulation software to address these measurement limitations during a Federal Highway Administration (FHWA) research and development effort. This continuous calibration method combines a digitally-synthesized step-frequency (SF)-GPR array and a data collection protocol sequence for the common midpoint (CMP) method. Modeling and laboratory test results for various data collection protocols and materials are presented in this paper. The continuous-CMP concept was finally implemented for FHWA in a prototype demonstration system called the Advanced Pavement Evaluation (APE) system in 2009. Data from the continuous-CMP protocol is processed using a semblance/coherency analysis to determine material propagation velocities. Continuously calibrated pavement thicknesses measured with the APE system in 2009 are presented. This method is efficient, accurate, and cost-effective.

  17. Ways of Realization of the Pragmatic Potential of Color Naming "Green" in English Advertising Texts in Civil Engineering Sphere

    Directory of Open Access Journals (Sweden)

    Elena N. Lyashenko

    2017-03-01

    Full Text Available Color naming is the subject of the representatives of different branches of knowledge – ethnographers, philologists, culture experts, psychologists, political scientists and many other professionals. The ability of color units to transmit values that go beyond the designation of color, is widely used in the literature, in everyday speech, in the advertising field. In recent years, interest has increased in linguistics to the study of color naming in advertising function. The present work is devoted to identifying ways of lexeme nomination «green» in the English-language advertising texts of civil engineering sphere. Most extra-linguistic factors are the cause of changes in the semantic structure of the word. The global environmental crisis, the issue of harmonization of man and nature contribute to the development of relations in this terminological adjective meaning of «environmentally friendly». In the studied texts the following methods of updating the value of «green» are presented: terminologization, varying forms, the creation of a pun. Inclusion in the text of comparatives and superlatives results in deliberate ambiguity statements: on the one hand, it is reported on the benefits of environmentally friendly products, on the other – the color component is updated. Ambiguity of the «green» advertising has a pragmatic focus, it is meant to attract the attention of potential consumers, create a positive image of the product, increase evaluative statements.

  18. Academic Training Lecture Regular Programme: How Large-Scale Civil Engineering Projects Realise the Potential of a City

    CERN Multimedia

    2012-01-01

    How Large-Scale Civil Engineering Projects Realise the Potential of a City (1/3), by Bill Hanway (Excecutive Director of Operations, AECOM Europe).   Wednesday, June 6, 2012 from 11:00 to 12:00 (Europe/Zurich) at CERN ( 80-1-001 - Globe 1st Floor ) In this series of three special lectures, leading experts from AECOM would explore the impact of a trio of major projects on a single city. In common with every metropolis, London has run-down districts and infrastructure in need of upgrading. The lectures propose to cover three of the biggest challenges: regenerating run-down areas; reducing congestion and transporting people more efficiently; and improving water and wastewater systems. Each project contributes to a collective public aim - to realise the potential of a growing city, and ensure its healthy, sustainable and competitive future. Lecture 1: Into the lecture series and The London 2012 Olympic Games Most cities share a group of common complex challenges – growing populations, agei...

  19. On management and control over construction progress in civil engineering programs%土建工程的施工进度管理和控制

    Institute of Scientific and Technical Information of China (English)

    刘斌

    2015-01-01

    The paper analyzes the factors influencing the construction progress management of civil engineering projects,and points out some sug-gestions for the preparation before the construction,compilation progress plan,and improvement of management regulations,so as to promote the construction progress management level of the civil engineering projects.%分析了影响土建工程施工进度管理的各项因素,针对施工进度管理中存在的问题,提出了做好开工前的准备工作、编制进度计划、完善项目管理法规体系等建议,以有效提高土建工程施工进度管理水平。

  20. Investigation on the civil engineer society in USA%关于美国土木工程师学会的调研

    Institute of Scientific and Technical Information of China (English)

    中国土木工程学会

    2003-01-01

    @@ 一、ASCE的创立 美国土木工程师学会(the American Society of Civil Engineering,ASCE)是一个代表了123,000多名工程师的专业组织.1852年11月5日,James Laurie(18111875)等12名工程师在Croton Aqueduct建立了美国土木工程师学会的前身--美国土木工程师与建筑师学会(the American Societyof Civil Engineer and Architects),为ASCE奠定了坚实的基础.今天ASCE已经成为世界上最杰出的工程学会之一,在2002年,ASCE将迎来150周年庆典.

  1. Problems in Civil Engineering Cost Management and Measures%土建工程造价管理存在的问题及措施分析

    Institute of Scientific and Technical Information of China (English)

    阮立娟

    2014-01-01

    At present, accompanied by an expansion of the scale in civil engineering and construction, civil engineering cost management has gradually been put on the agenda. This paper discusses the main problems in cost management in the current period, and puts forward the corresponding measures to solve the problem accordingly.%现阶段,伴随土木建筑工程规模的日益扩大,土建工程的造价管理逐渐被提上议事日程。本文主要针对当前一个时期内造价管理的主要问题进行论述,据此提出相应的解决问题的措施。

  2. Evaluation of automated underground mapping solutions for mining and civil engineering applications

    Science.gov (United States)

    Eyre, Matthew; Wetherelt, Andrew; Coggan, John

    2016-10-01

    The extractive and construction industries rely heavily on accurate geospatial data to control position, location, alignment, and orientation of planned excavations. Recent advancements in the survey industry, through the use of terrestrial laser scanning, can now provide engineering teams with three-dimensional (3-D) data in unprecedented detail via georeferenced point clouds. Furthermore, equipment is now available that provides fully mobile automated mapping solutions, independent of satellite positioning, utilizing simultaneous localization and mapping. This paper evaluates the surveying capability of three fully mobile automated mapping solutions against a benchmark laser scanning survey undertaken at the underground Camborne School of Mines Test Mine facility. The study highlights that handheld automated mapping solutions, in which closed-loops can be formed, have the potential to provide quicker data collection and processing time, as well as the required accuracy for underground surveying applications. However, the automated solution was unable to produce the necessary point cloud density to identify low-angled discontinuities that may have a major safety implication, leading to potential rockfall.

  3. Knowledge creation and innovation in a civil engineering course for the first-year university students

    Science.gov (United States)

    Salmisto, Alpo; Nokelainen, Petri

    2015-09-01

    This article examines the application of knowledge creation learning and innovation to higher education in construction. The objectives are to demonstrate the application of the course based on knowledge creation learning to mass teaching and to analyse whether knowledge creation learning improves student motivation and learning. The empirical data (n = 120) consist of the results of a student survey from two university-level courses. The first course, Basics of Construction Management and Economics (n = 79), was developed on the basis of knowledge creation, and the second course, Building Project (n = 41), was implemented using the case-based learning method. The results, based on student self-assessments, showed that case-based learning supported the learning process more effectively than did the course based on knowledge creation. On the other hand, the results showed the relevance of applying knowledge creation-based learning to the mass teaching of construction in higher education. The findings of this empirical study suggest that more attention should focus on developing students' metacognitive skills in engineering education.

  4. Energy evaluation on bounded nonlinear control laws for civil engineering applications

    Science.gov (United States)

    Gattulli, Vincenzo

    1994-09-01

    In the last decades researchers in the field of structural engineering have challenged the idea of facing natural hazard mitigation problems by adding to structures particular systems which are designed to protect buildings, bridges and other facilities from the damaging effects of destructive environmental actions. Among most protective systems and devices, active structural control, although having already reached the stage of full-implemented systems, still need theoretical investigation to achieve a complete exploitation of its capacity in reducing structural vibrations. In most of the operating systems (e.g. Soong and Reinhorn, 1993), linear control laws based on some quadratic performance function criteria are used since the design process for these linear strategies are fully developed and investigated. Moreover, the performances of structural systems controlled by linear techniques bring about some question concerning the complete and wise utilization of the capacity of control devices. Indeed, some of these inefficiencies are evident such as the inability to produce a significant peak response reduction in the first cycles of recorded or simulated time histories. (e.g. Reinhorn et al., 1993). Realizing that the expected maximum value for the required control force is a fundamental parameter in all processes to design the complete control system, in this paper it is shown that appropriate nonlinear control laws can significantly enhance the reduction of the system response under the same constraints imposed on the control force. Energy evaluation on the performance of different kinds of nonlinearities are reported such that a common base is built to perform comparative studies. These techniques have been successfully experimented on a structural model with ground excitations supplied by shaking table (e.g. Gattulli et al., 1994).

  5. Plutonium isotopes and their decay products in civil nuclear engineering; Les isotopes du plutonium et leurs descendants dans le nucleaire civil

    Energy Technology Data Exchange (ETDEWEB)

    Dautray, R

    2005-07-01

    This book is the continuation and conclusion of a previous book from the same author, entitled 'civil nuclear energy in the temporal framework of climatic changes' (Tec and Doc editions). It focusses on plutonium and on its daughter products. A synthesis of the scientific and technical data gathered so far is presented, together with the different choices offered to political authorities in the light of present-day knowledge. The authors starts from existing and firmly implemented scientific and technical data and presents some ways to solve the pending questions about the management of radioactive wastes. He shows that in our democratic system, the choice belongs to people. Beside the storage and deep disposal facilities, still necessary, some processes and problems are reviewed and explored. Of course new scientific data will be obtained, which would change the ways to discover and evaluate the ways to follow up. (J.S.)

  6. Atlas civil engineering

    CERN Multimedia

    2002-01-01

    The first things lowered to the cavern were not parts of the new detector or parts for the accelerator rather than the machines digging the cavern bigger and lifts that transport stones and other excess material up to the surface. This work was very demanding already.

  7. Problem-Based Project-Oriented Learning: Educating and evaluating for new disciplines emerging in the interplay between the professions of civil engineering and architecture

    DEFF Research Database (Denmark)

    Mullins, Michael

    2006-01-01

    advantages in a search for solutions of which integrate these approaches. The Department of Architecture and Design (A&D) at Aalborg University has been intiated with the explicit aim to educate for new disciplines emerging in the interplay between the professions of civil engineering and architecture......University curricula are traditionally based on specialised discipline-specific subjects, which like engineering and architecture approach solutions to design problems with methods suited to their specific view of the issues. Problem-based learning models (PBL) offer a number of potential......, and uses PBL and project-oriented models for its educational form. There is a distinct difference between engineering and architecture in their evolutionary backgrounds and their varying degree of emphasis on natural science. Both present different forms of problem solving that appeal to different learning...

  8. Proceedings of the 2009 annual general conference and associated specialty conferences of the Canadian Society for Civil Engineering : on the leading edge[Includes the CSCE forum on professional practice and career development : 1. international engineering mechanics and materials specialty conference : 1. international/3. coastal, estuarine and offshore engineering specialty conference : 2. international/8. construction specialty conference

    Energy Technology Data Exchange (ETDEWEB)

    Lye, L.; Burrell, B.; Snow, M.; Hussein, A.; Thomas, M.; Isgor, B.; Elliott, C.; Christian, J.; Rankin, J. [Canadian Society for Civil Engineering, Montreal, PQ (Canada)] (eds.)

    2009-07-01

    This 2009 international conference of the Canadian Society for Civil Engineering (CSCE) focused on the findings of the latest research and the emergence of the civil engineering profession. It was held in conjunction with the following specialty conferences: the first international and first engineering mechanics and materials (IEMM)specialty conference; the first international and third international hydrotechnical coastal estuarine and offshore engineering specialty conference (IHSC); the second international and eighth construction specialty (ICS) conference; and the forum on professional practice and career development (FPD). The conference and associated specialty conferences provided a forum to discuss recent developments in all areas of civil engineering. Delegates from industrial, research, and academic institutions presented innovative technologies in the different areas of civil engineering and identified future directions for sustainable development. The presentations addressed a broad range of issues, such as the need for sustainable infrastructure while improving the safety of roads, dams, water supply and sewage treatment systems. Technical sessions addressed infrastructure management issues, risk assessment, hydrotechnical engineering and transportation engineering. The conference featured 182 presentations, of which 19 have been catalogued separately for inclusion in this database. refs., tabs., figs.

  9. Evaluation of environmental management resources (ISO 14001) at civil engineering construction worksites: a case study of the community of Madrid.

    Science.gov (United States)

    Rodríguez, Gracia; Alegre, Francisco Javier; Martínez, Germán

    2011-07-01

    In recent years, significant advances have been made in business organization and management. The growing demands of clients as well as the globalization of world markets are among the many factors that have led to the establishment of systems of quality control and environmental management as a competitive strategy for businesses. When compared to other professional sectors, the construction sector has been slower to respond to environmental problems and to adopt Environmental Management Systems (EMS). In the world today the ISO 14001 standard is currently the main frame of reference used by construction companies to implement this type of management system. This article presents the results of a general study regarding the evaluation of the application of the ISO 14001 standard at civil engineering construction worksites in the Community of Madrid (Spain), specifically pertaining to requirement 4.4.1, Resources, roles, responsibilities, and authority. According to requirement 4.4.1, company executives should appoint people responsible for implementing the EMS and also specify their responsibilities and functions. The personnel designated for supervising environmental work should also have sufficient authority to establish and maintain the EMS. The results obtained were the following: - EMS supervisors did not generally possess adequate training and solid experience in construction work and in the environment. Furthermore, supervisors were usually forced to combine their environmental work with other tasks, which made their job even more difficult. - Generally speaking, supervisors were not given sufficient authority and autonomy because productivity at the construction site had priority over environmental management. This was due to the fact that the company management did not have a respectful attitude toward the environment, nor was the management actively involved in the establishment of the EMS. - Insufficient resources were allocated to the Environmental

  10. On Civility and Civilizations

    Institute of Scientific and Technical Information of China (English)

    DAVID GOSSET

    2010-01-01

    @@ At a time when misunderstand-ings between cultures run rampant, when walls of fear, prejudice and hatred divide the members of the human family, it is urgent to intensify the dialogue between civilizations. Under the new leadership of its Director General lrina Bokova, the United Nations Educational, Scientific and Cultural Organization (UNESCO) declared 2010 as the "Year for the Rapprochement of Cultures." In this context, the concerted reflections and actions of Europe and China can be highly meaningful.

  11. Web application to access U.S. Army Corps of Engineers Civil Works and Restoration Projects information for the Rio Grande Basin, southern Colorado, New Mexico, and Texas

    Science.gov (United States)

    Archuleta, Christy-Ann M.; Eames, Deanna R.

    2009-01-01

    The Rio Grande Civil Works and Restoration Projects Web Application, developed by the U.S. Geological Survey in cooperation with the U.S. Army Corps of Engineers (USACE) Albuquerque District, is designed to provide publicly available information through the Internet about civil works and restoration projects in the Rio Grande Basin. Since 1942, USACE Albuquerque District responsibilities have included building facilities for the U.S. Army and U.S. Air Force, providing flood protection, supplying water for power and public recreation, participating in fire remediation, protecting and restoring wetlands and other natural resources, and supporting other government agencies with engineering, contracting, and project management services. In the process of conducting this vast array of engineering work, the need arose for easily tracking the locations of and providing information about projects to stakeholders and the public. This fact sheet introduces a Web application developed to enable users to visualize locations and search for information about USACE (and some other Federal, State, and local) projects in the Rio Grande Basin in southern Colorado, New Mexico, and Texas.

  12. The Philadelphia School District's Ongoing Financial Crisis

    Science.gov (United States)

    Caskey, John; Kuperberg, Mark

    2014-01-01

    This article describes the budget crisis that the School District of Philadelphia has faced for the past few years. Three specific events triggered the 2012 crisis: an abrupt reduction in federal and state funding, the inability of the district to cut many of its costs, and political pressures on the district to spend available revenues in a given…

  13. Philadelphia's Renaissance Schools Initiative after Four Years

    Science.gov (United States)

    Stratos, Kati; Wolford, Tonya; Reitano, Adrienne

    2015-01-01

    In 2010-2011, the School District of Philadelphia (the District) launched its Renaissance Schools Initiative, a program designed to dramatically improve student achievement in the District's lowest performing schools. Some schools became Promise Academies, based on the federal turnaround model, and remained District-operated neighborhood schools.…

  14. Philadelphia's Independence Starts Here: Disability Arts Festival

    Science.gov (United States)

    Smith, Mimi Kenney

    2008-01-01

    In tribute to Philadelphia's world-changing past, Festival partners dubbed the month-long Disability Arts Festival "Independence Starts Here." Through it, they hoped to begin to change the future for over 675,000 people with disabilities in the area and their families. Led by Amaryllis Theatre Company, which now also serves as VSA arts…

  15. 19 CFR 10.183 - Duty-free entry of civil aircraft, aircraft engines, ground flight simulators, parts, components...

    Science.gov (United States)

    2010-04-01

    ... ARTICLES CONDITIONALLY FREE, SUBJECT TO A REDUCED RATE, ETC. General Provisions Civil Aircraft § 10.183... merchandise under a provision for which the rate of duty “Free (C)” appears in the “Special” subcolumn of the... paragraph will be without interest, notwithstanding the provision of 19 U.S.C. 1505(c). (g) Verification...

  16. Selected contributions to neurology by Philadelphia neurologists since 1980.

    Science.gov (United States)

    Asbury, Arthur K; Sperling, Michael R; Aguirre, Geoffrey Karl; Liu, Grant T

    2010-01-01

    On the occasion of the 125th anniversary of the Philadelphia Neurologic Society, 3 short talks were given that highlighted accomplishments by Philadelphia's neurologists over the past 30 years. The theme for the celebration was "Contributions to Neurology by Philadelphia Neurologists, 1980-2008." Each of the 3 speakers was chosen because of his contributions and the sequential time frames in which they occurred. Dr. Arthur K. Asbury detailed the original description of the Lewis-Sumner syndrome, Dr. Michael R. Sperling summarized the growth of epilepsy surgery in Philadelphia, and Dr. Geoffrey K. Aguirre depicted the roots of functional magnetic resonance imaging in Philadelphia.

  17. The influences of scientific information on the growing in opinion for high level waste repository. Focusing on education in civil engineering course

    Energy Technology Data Exchange (ETDEWEB)

    Amemiya, Kiyoshi; Chijimatsu, Masakazu [Hazama Corp., Tokyo (Japan)

    2002-12-01

    In this research, survey of awareness and attitude to high level radioactive waste (HLW) disposal on 36 students of a postgraduate course was conducted. They have been studying civil and rock engineering, so they belong to 'the Group' that acquires high education, culture and faculty to understand the science in geological disposal of HLW. First of all the awareness of danger or safety to HLW disposal was examined. Some 23% regard HLW disposal as safe, on the contrary 60% feel danger. This is similar to the awareness of the average public. And some 72% think that HLW should be disposal, but only 6% agree the repository in their town. It shows that the Group of high education has a tendency of calmly understand the necessity of disposal, but they also have a nature so-called 'not in my back yard (NIMBY)'. After that, the students were divided in two groups. Then, one group received information from the promoter, and another received information from opponents. The result of second questionnaire shows that the awareness of danger is affected strongly by given information even in this Group, but they become thoughtful and prudent in their opinion and decision-making as increasing information. Finally in this paper it is studied that 'what is the role of education of civil engineering?' and 'what is key issue in R and D of HLW disposal?' considering Public Acceptance. (author)

  18. 建筑工程概预算存在的问题及对策%The Problems and Countermeasures in Civil Engineering Budgets

    Institute of Scientific and Technical Information of China (English)

    盛晓伟; 镡铁春

    2011-01-01

    The civil engineering project budget is of critical importance to the project. However, there are many problems which include poor draft of the budget, less routine project bidding, mismanagement of the project and unpractical construction plan. The paper proposes the according countermeasures. The design should be optimized and the civil engineering budget should be made carefully. The project bidding should be regulated and project management should be improved. The project plan should be scientific, and the observation and management from the government should be enhanced.%建筑工程概预算在工程中起着至关重要的作用.然而,我国现阶段建筑工程概预算却存在着工程概预算编制粗糙、项目招投标不够规范,项目管理相对混乱和施工图纸实用性差的问题,应该优化设计方案、细致编写工程概预算,规范招投标工作,完善工程概预算管理,科学设计工程图纸,并加大政府监管力度.

  19. Education and training requirements for a practicing civil engineer to qualify for registration in Australasia and the United Kingdom

    OpenAIRE

    2013-01-01

    The making a qualified and competent engineer requires education, practical training, and a professional assessment. Obtaining a professional registration is an indication of competence and willingness to shoulder the legal and social responsibilities required to be an engineer. It also gives the general public the sense of confidence for engineering works designed and constructed by engineers. The requirements and procedure of registration can be stipulated in law, and/or controlled by profe...

  20. Realização de processos verbais em textos científicos da área de engenharia civil Realization of verbal processes in scientific texts in the field of civil engineering

    Directory of Open Access Journals (Sweden)

    Cristiane Fuzer

    2012-01-01

    Full Text Available O presente trabalho, vinculado ao projeto SAL, apresenta um estudo da realização de processos verbais em língua portuguesa do Brasil em textos da área de Engenharia Civil. O objetivo é analisar quais formas linguísticas realizam processos verbais, com que frequência são usados e que significados produzem em textos científicos dessa área. O corpus de análise constitui-se de 51 textos que compõem os volumes 1 e 2 do livro "Concreto: ciência e tecnologia", publicada pelo IBRACON (Instituto Brasileiro do Concreto. Para a compilação do corpus, seguiram-se princípios da Linguística de Corpus (Sardinha, 2004; Almeida & Correia, 2008. A identificação das formas linguísticas e o tratamento quantitativo dos dados foram realizados com auxílio das ferramentas WordListe Concord do WordSmith Tools (SCOTT, 2008. A análise das formas linguísticas foi realizada com base nos critérios da Gramática Sistêmico-Funcional (Halliday & Matthiessen, 2004 para descrição e classificação de processos verbais. Os resultados apontam que os verbos mais frequentes do corpus, recomendar e especificar, funcionam como processos de semiose do tipo comando e podem ser consideradas características do discurso científico na área de Engenharia Civil.Formas linguísticas em terceira pessoa do presente e no particípio servem como recurso de impessoalização no discurso científico.This paper, linked to the SAL project, presents a study on the realization of verbal processes in Brazilian Portuguese in Civil Engineering texts. Its aim is to analyse the linguistic forms that realize verbal processes, how often they are used and what meanings they produce in texts in that field. The corpus consists of the 51 texts in the 2 volumes of the book Concreto: ciência e tecnologia, published by IBRACON (InstitutoBrasileiro do Concreto. To compile the corpus we followed the principles of Corpus Linguistics (Sardinha, 2004; Almeida & Correia, 2008. The

  1. How to guarantee the safety and economy of civil engineering design work%如何保障土木工程设计工作的安全性与经济性

    Institute of Scientific and Technical Information of China (English)

    杨晓峰

    2014-01-01

    针对现阶段国内土木工程设计结构不牢固、存在安全规范漏洞、构造柱和结构柱混淆、承重面积小的问题,探讨了保障土木工程设计工作中安全性与经济性的措施,以促进国内土木工程设计工作的不断进步。%According to not firm structure design, existing safety specification loopholes, structural columns and structural confusion, small bear-ing area problems at present domestic civil engineering, discussed guarantee the safety and economy of civil engineering design work, in order to promote the constantly progress of domestic civil engineering design work.

  2. Discussion on the Teaching Research and Reform of Civil Engineering under the Certified Qualification System%论执业资格制度下的土建专业教学研究与改革

    Institute of Scientific and Technical Information of China (English)

    杜建华; 沈红云

    2011-01-01

    The certified qualification system is a vocation admittance system which has been put in practice in civil engineering.This paper explains the importance of the professional teaching reform of civil engineering and puts forward the content and the basic ideas which are suitable for professional teaching reform of civil engineering with certified qualification system.%执业资格制度作为一种行业准入制度,已经在土建设计、施工、监理与检测等领域实施。阐述土建专业教学改革的重要性,提出与执业资格制度相适应的土建专业教学改革的内容与思路。

  3. Fiscal Year 2014 United States Army Corps of Engineers -Civil Works Annual Financial Report: Maintaining Readiness Through Fiscal Responsibility

    Science.gov (United States)

    2014-01-01

    Compensation Act benefits. The Department of the Army (DA) actuarial liability for workers’ compensation benefits is developed by the Department of...Works) 3 Message from the USACE Chief Financial Officer 5 Management’s Discussion and Analysis 7 Civil Works Program Principal Financial Statements...and responsive development and management of the Nation’s water resources; (2) protect, restore, and manage the aquatic environment; and (3) provide

  4. Final Environmental Assessment: Addressing Construction of a New Civil Engineering Workshop at Bellows Air Force Station, O’ahu, Hawaii

    Science.gov (United States)

    2010-03-01

    Craig Gorsuch , Det 2, 18 FSS/CEE Environmental Program Manager, 515 Tinker Road, Waimanalo, Hawai?i 96795-1903. Requests can also be made by addressing...this document should be directed to Craig Gorsuch , Det 2, 18 FSS/CEE, Environmental Program Manager, 515 Tinker Road, Waimanalo, Hawai‘i 96795-1903...be conducted to rul611 Sect. 106, and CZMA requirements. 5. Please provide comments directly to Mr. Craig Gorsuch , Det 2, 18 FSS/CEE, Civil

  5. Portugal’s Laboratorio National de Engenharia Civil,

    Science.gov (United States)

    The civil engineering program of Portugal’s Laboratorio National de Engenharia Civil is described, with emphasis on recent trends within the Hydraulics Department’s coastal engineering unit.

  6. The origins of American physical anthropology in Philadelphia.

    Science.gov (United States)

    Mann, Alan

    2009-01-01

    With its location on a river with easy access to the sea, its central placement between the English speaking colonies to the north and south and its trading connections with the western frontier, there were many reasons Philadelphia became one of the most important towns of prerevolutionary America. In the early 1770s, it was the site of the first meeting organized to deal with the perceived inequities of the British government toward the colonies. It was where Thomas Jefferson wrote much of the Declaration of Independence, whose soaring statements reflecting the Age of Enlightenment spoke of the equality of all men. It was to this debate, centered on just who was included in this declaration that the origins of physical anthropology in America can be traced. Notable men in the early phases of this disputation included Samuel Stanhope Smith and especially Samuel George Morton, considered the founder of American physical anthropology. The American School of Anthropology, which argued for the polygenic origins of human races was substantially founded on Morton's work. Recent accusations that Morton manipulated data to support his racist views would appear unfounded. The publication of The Origin of Species in 1859 and the issuing of the Emancipation Proclamation in 1862-63 effectively ended the earlier debates. By the time of the American Civil War, 1861-65, physical anthropology was beginning to explore other topics including growth and development and anthropometry.

  7. Environmental guidelines for reuse of ash in civil engineering applications - phase 2; Miljoeriktlinjer foer askanvaendning i anlaeggningsbyggande - etapp 2

    Energy Technology Data Exchange (ETDEWEB)

    Bendz, David; Wik, Ola; Elert, Mark; Haakansson, Karsten

    2006-07-15

    Producers, authorities and users have acknowledged the need for common environmental guidelines for residues. The objective of this project has been to develop a proposal for common environmental guidelines for reuse of ash in civil engineering applications. The project has a narrow risk assessment perspective and focus on a set of substances where a well developed environmental policy and knowledge are available. Health aspects for construction workers are not covered in the project. The starting point in the risk assessment is the assumption that ashes may be used just like any conventional construction material. Special requirements or regulations regarding precautionary actions in the handling of ashes, regarding the site or surroundings will be avoided. The guiding principle has been the precautionary principle: reuse of ash is acceptable only if it constitute an insignificant risk to health and environment. The calculations are based on defined emission- and exposure scenarios. The concept of insignificant risk imply that the impact in the defined points of compliance does not exceed established health- and environmental criteria. The model address health risks associated with spreading of particles and exposure by dust, oral intake, dermal contact and intake by vegetables or wild grown berries and consumption of ground water. Off-site environmental effects in surface waters and in soil as well as health- and environmental risks in the post use phase are also considered. Exposure by dust is addressed in the same way as in the Swedish Environmental Protection Agency's guidelines for contaminated soil. The guidelines values for exposure by dust, oral intake, dermal contact and intake by vegetables or wild grown berries are total content, whereas the guidelines for exposure by consumption of ground water or environmental effects in surface waters are based on leaching properties of the ash. The guidelines rely on a conceptual model, defined emissions and

  8. Petrophysical properties and durability of the Touro amphibolite s (A Coruna, Spain) used in civil engineering; Petrofisica y durabilidad de las anfibolitas de Touro (A Coruna, Espana) para su uso en obra civil

    Energy Technology Data Exchange (ETDEWEB)

    Perez Foretes, A. P.; Varas Muriel, M. J.; Cano Linares, H.; Castineiras Garcia, P.; Pardo Santayana, F.

    2013-09-01

    Nowadays, Touro amphibolites (La Coruna, Spain) are exploited as crushed-rock aggregates in civil engineering. These materials are mainly used as ballast for road construction. Therefore, it is interesting to study these materials in function of several parameters obtained directly in quarry faces. For this purpose, the same techniques and tests previously applied in other fields such as natural stone have been used. The aim of this work is to study the quality and durability of Touro amphibolites when subjected to extreme temperature, water and salt (NaCl) actions. The NaCl is included in this study because it is commonly used as fluxing material in pavements and roads. The quality of these amphibolites, a classification based on the concrete and road tests and the techniques applied, is good. The best properties of these materials are their low porosity and high ability to compact. They also have a high durability under the action of extreme temperatures, salts and water. These results also indicate that these amphibolites can better support high temperature rather than low temperature degradation. (Author)

  9. Application of CAD Marking and Query in Civil Engineering%CAD的标注和查询功能在土木工程中的应用

    Institute of Scientific and Technical Information of China (English)

    王继成; 林清辉; 柳爱

    2012-01-01

    It is difficult to calculate in construction measurement. Mistakes are often made in manual calculations and it's not intuitive to manual calculation. In this article, construction measurement with CAD marking and querying is presented and it is applied to automatically implement construction measurement in civil engineering. CAD marking and querying has high accuracy as well as implementation easily, quickly and directly.%针对施工放线内业计算繁琐、手工计算易出差错且不直观等问题,介绍了利用CAD程序的标注工具和查询功能,并将其应用于土木工程自动完成施工放线的内业计算,标注、查询的参数精度高、简单、直观、快捷.

  10. 土木工程中混凝土施工技术分析%Analysis of the Concrete Construction Technology in Civil Engineering

    Institute of Scientific and Technical Information of China (English)

    王小平

    2013-01-01

    In the building construction process, the choice of materials is extremely strict. The material quality is good or bad is often directly determines the quality of construction wo-rk. The essay analyzes the construction technology of civil en-gineering concrete and summarizes some useful suggestions to improve the quality of construction.%  在建筑工程施工过程中,选用的材料是异常严格的。材料质量好坏往往直接决定了建筑工程的质量。本文对土木工程中混凝土施工技术进行分析,总结了一些提高建筑工程质量的有效建议。

  11. Dispersity mode of production practice for civil engineering specialty%土建类专业分散性生产实习模式探索

    Institute of Scientific and Technical Information of China (English)

    程鹏环

    2011-01-01

    Through analysing the drawbacks in production practice of civil engineering speciality,the paper explored the progressive mode of dispersity production practice,such as improving teachers team,constructing practice bases and practice website,reforming management system and test system.%通过分析土建类专业生产实习存在的弊端,在师资队伍建设、实习实训基地建设、实习网站建设、管理制度改革和考核制度改革的基础上,分阶段探索了分散性生产实习模式。

  12. Modeling In-Use Steel Stock in China’s Buildings and Civil Engineering Infrastructure Using Time-Series of DMSP/OLS Nighttime Lights

    Directory of Open Access Journals (Sweden)

    Hanwei Liang

    2014-05-01

    Full Text Available China’s rapid urbanization has led to increasing steel consumption for buildings and civil engineering infrastructure. The in-use steel stock in the same is considered to be closely related to social welfare and urban metabolism. Traditional approaches for determining the in-use steel stock are labor-intensive and time-consuming processes and always hindered by the availability of statistical data. To address this issue, this study proposed the use of long-term nighttime lights as a proxy to effectively estimate in-use steel stock for buildings (IUSSB and civil engineering infrastructure (IUSSCE at the provincial level in China. Significant relationships between nighttime lights versus IUSSB and IUSSCE were observed for provincial variables in a single year, as well as for time series variables of a single province. However, these relationships were found to differ among provinces (referred to as “inter-individual differences” and with time (referred to as “temporal differences”. Panel regression models were therefore proposed to estimate IUSSB and IUSSCE in consideration of the temporal and inter-individual differences based on a dataset covering 1992–2007. These models were validated using data for 2008, and the results showed good estimation for both IUSSB and IUSSCE. The proposed approach can be used to easily monitor the dynamic of IUSSB and IUSSCE in China. This should be critical in providing valuable information for policy making regarding regional development of buildings and infrastructure, sustainable urban resource management, and cross-boundary material recycling.

  13. Impact of Community College of Philadelphia Allied Health Programs on the Philadelphia Region. Report #117.

    Science.gov (United States)

    Philadelphia Community Coll., PA.

    This report discusses the Allied Health programs at Community College of Philadelphia (CCP): (1) Clinical Laboratory Technician; (2) Dental Assisting Hygiene; (3) Dental Assisting Certificate; (4) Diagnostic Medical Imaging; (5) Dietetic Technician; (6) Health Information Technology; (7) Medical Assisting and Office Management; (8) Nursing; and…

  14. Philadelphia-negative classical myeloproliferative neoplasms

    DEFF Research Database (Denmark)

    Barbui, T.; Barosi, G.; Birgegard, G.

    2011-01-01

    We present a review of critical concepts and produce recommendations on the management of Philadelphia-negative classical myeloproliferative neoplasms, including monitoring, response definition, first- and second-line therapy, and therapy for special issues. Key questions were selected according......, with the addition of cytogenetics evaluation and transfusion status. High-risk patients with PV should be managed with phlebotomy, low-dose aspirin, and cytoreduction, with either hydroxyurea or interferon at any age. High-risk patients with ET should be managed with cytoreduction, using hydroxyurea at any age...

  15. Repair, Evaluation, Maintenance, and Rehabilitation Research Program: Evaluation of Bird Pest Problems at U.S. Army Corps of Engineers Civil Works Projects.

    Science.gov (United States)

    1987-09-01

    All year John Updike 219-782-2181 (mainly excre- Lake IN but ment but also mainly nests) summer Chesapeake Philadelphia Chesapeake City, Bridges John ...Problem of Species# Project District Location Site Year Contact Telephone Cliff. Swallows John Martin Albuquerque Hasty, CO Dam complex End March-May

  16. Developing a Standard Approach to the Value Engineering Process for the Civil Engineering Industry: a Theoretical, Case Study and Industry Perspective.

    OpenAIRE

    Mitchell, Charles Anthony

    2013-01-01

    The original Value Engineering process developed in North America in the late 1940‟s, was primarily based on functional analysis. However; the North American Value Engineering process was not adopted in Europe. Instead various mixed methods were assembled under the umbrella term of Value Management. Nowadays there is much debate about what Value Engineering is and how is it defined? This question arises in part due to there being no standard approach in Europe as a whole in undertaking ValueM...

  17. The government and the problems of development of non-governmental enterprises of the military-industrial complex and civil engineering of Russia

    Directory of Open Access Journals (Sweden)

    Aleksandr Vladimirovich Lugovtsov

    2012-09-01

    Full Text Available The non-governmental industrial sector of Russia is growing from year to year as a result of privatization program consistently held by the government. In the beginning of the 90-s, the heads of state have decided not to hold the state industrial policy any more reasoning from the idea of market self-regulation. The enterprises of the military-industrial complex of Russia, as a result, were in a grave condition because there were no state orders anymore. The enterprises were offered to produce civil engineering production because it was considered that there were no more enemies to fight against. As time goes by, some enterprises became bankrupt. But the majority has survived under the direction of smart owners despite but not due to the conditions of survival of that time. The life has shown that the state industrial policy is indispensable, especially when Russia is near to enter into the WTO. There are no more obstacles on the path to this, but nobody knowsexactly which enterprises will become bankrupt, what will be with those people who will lose their work and which enterprises will continue working and how. It is not clear neither at federal level nor at regional or municipal. In this paper, the modern operating conditions and opportunities to modernize the non-governmental industrial sector are analyzed. Performatives on education reform regarding the young engineers and economists aimed to reduce the period of their adaptation at work have been formulated.

  18. Factors that Influence Female Folk to engage in Building and Civil Engineering Construction Site Work in Nigeria – a case Study of Isoko Women

    Directory of Open Access Journals (Sweden)

    O. Osubor (Fniqs, Rqs

    2016-11-01

    Full Text Available From early times, building and civil engineering construction has been a male dominated industry. But in today’s contemporary times, the women folk have broken this monotony of male domination. This is evident in the building and engineering industry. Isoko land in the south of Delta State, although women have broken from the stereotype of home keeping into construction, their level of engagement is at the lowest ebb as casual and unskilled workers. This study looks at the factors that encourage female to engage in construction especially at the lowest ebb and the implications for the woman, society, and construction industry. Oral interview methodology was adopted in this study. The response of five local contractors/employers and 60 women interviewed at construction site formed the data for this study. A simple percentage was used to analyze data generated. Findings reveal that poverty and unemployment, lack of education and skill, family responsibility and environmental factors top the reasons. Policies that encourage and make it mandatory for women to progress in education and skill acquisition, provide a future for women in construction and stop discrimination against women will be a step in the right direction. Such policies are recommended.

  19. Problems Related to the Siting of the Laboratory Building for Civil Engineering Department at the University of Warmia and Mazury in Olsztyn, Poland

    Science.gov (United States)

    Zagroba, Marek

    2016-10-01

    This paper deals with the conditions underlying and the problems arising from the siting of a building with specialist laboratories in a developed part of the university campus in Olsztyn, Poland. The topography of the terrain and the need to house civil engineering laboratories in the planned building had an immense impact on the shape of the building and consequently on its foundations, whose dimensions responded to the ground conditions and the specification of various loads they would have to support, including the equipment for the laboratories. The siting of a building as a step in the construction process entails several problems, which are first taken into consideration at the stage of making preliminary concept plans and are subsequently verified while working on the final construction plan. The required information included geotechnical documentation, survey of the ground conditions and the data regarding the predicted loads on the building, necessary to select the right type of foundations. All these problems grow in importance when dealing with such unique buildings like the discussed example of a laboratory building for the Civil Engineering Department, built on a site within a conservation zone on the campus of the University of Warmia and Mazury in Olsztyn, Poland. The specific character of the building and the specialist equipment with which it was to be furnished (a resistance testing machine, a 17-meter-long wave flume) necessitated a series of analyses prior to the siting of the building and selecting suitable foundations. In turn, the fact that the new building was to be erected in the conservation zone meant that collaboration with the Heritage Conservation Office had to be undertaken at the stage of making the plan and continued during the construction works. The Heritage Officer's recommendations concerning the building's shape, divisions, dimensions, materials used, etc., created a situation where the team of designers and architects had to

  20. 75 FR 2463 - Continuing Contract for Civil Works Project Managed by the United States Army Corps of Engineers...

    Science.gov (United States)

    2010-01-15

    ... line of the message. Mail: U.S. Army Corps of Engineers, Attn: CECT-P (Robin A. Baldwin), 441 G Street... copy form. FOR FURTHER INFORMATION CONTACT: Ms. Robin A. Baldwin, Headquarters U.S. Army Corps of... language and is designed to give USACE officials options for funding contracts spanning more than...

  1. Energy and Greenhouse Gas Emission Reduction Opportunities for Civil Works Projects Unique to the US Army Corps of Engineers

    Science.gov (United States)

    2012-10-26

    26 22 NOx emissions of various biodiesel blends (Kong 2008) ....................................................... 27...deposits. These issues primarily apply to 100% biodiesel (B100); the drawbacks are greatly reduced with 20% biodiesel blends (B20) and lower blends . The...emission benefits and drawbacks vary with the biodiesel blend . Figure 21 shows this effect for heavy-duty automotive diesel engines. The issue of

  2. How Student Written Communication Skills Benefit during Participation in an Industry-Sponsored Civil Engineering Capstone Course

    Science.gov (United States)

    Fries, Ryan; Cross, Brad; Zhou, Jianpeng; Verbais, Chad

    2017-01-01

    Because many engineering programs use capstone design courses and value strong communication abilities, authors sought to identify how student written communication skills changed because of industry-sponsored capstone design projects. A student exit survey was collected at the end of the capstone design course during faculty-led projects and…

  3. Strategies for Talent Management: Greater Philadelphia Companies in Action

    Science.gov (United States)

    Council for Adult and Experiential Learning (NJ1), 2008

    2008-01-01

    Human capital is one of the critical issues that impacts the Greater Philadelphia region's ability to grow and prosper. The CEO Council for Growth (CEO Council) is committed to ensuring a steady and talented supply of quality workers for this region. "Strategies for Talent Management: Greater Philadelphia Companies in Action" provides…

  4. Making Health Easier: Active Living in Philadelphia, PA PSA (:60)

    Centers for Disease Control (CDC) Podcasts

    2013-06-07

    Making communities bike-friendly can help reduce traffic congestion and increase the physical activity of residents. Learn how one Philadelphia resident worked with his community to make Philadelphia a more bike-friendly city.  Created: 6/7/2013 by National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP).   Date Released: 6/7/2013.

  5. Philadelphia's Renaissance Schools: Start up and Early Implementation. Executive Summary

    Science.gov (United States)

    Research for Action, 2011

    2011-01-01

    In April 2009, Superintendent Arlene Ackerman announced her reform plan for the School District of Philadelphia (the District)--"Imagine 2014". Among other major initiatives, "Imagine 2014" laid the groundwork for Philadelphia's Renaissance Schools Initiative. The Renaissance Initiative, set to enter its second year in 2011-12, is an effort to…

  6. 高层建筑钢结构在土建工程中的应用分析%The Application Analysis of High-rise Steel Structure in Civil Engineering

    Institute of Scientific and Technical Information of China (English)

    彭卓维

    2014-01-01

    近年来,随着城市和效区大规模的土建施工,高层建筑越来越多,钢结构施工成为高层建筑中不可缺少的一部分。本文针对高层建筑钢结构在土建工程中的应用进行了简要分析。%In recent years, with the large-scale civil engine-ering construction of urban and suburban, more and more high-rise buildings have been built and the steel structure construction become an indispensable part of in high-rise buildings. This article carries on the briefly analysis of the High-rise building steel structure in civil engineering.

  7. Civil Identity

    DEFF Research Database (Denmark)

    Petersen, Lars Axel

    scanning, etc., to discussions of Shari'a law versus common civil law in India; from the study of religious cult in ancient city states to the processes of constitutional reconstruction in former Communist countries; and from attempts at conflict resolution and prevention between Jewish and Arab citizens...... of Israel to Luce Irigaray's Feminist agenda of elaborating gender specific civil identities. My intention is to investigate whether these different employments of 'civil identity' point towards a common, and fairly well defined object field asking questions of contemporary relevance to the philosophy...... of technology and of law. If such a field can be established, the answers to those questions might be relevant to such contemporary issues as inter-ethnic, religious, and -cultural conflict or reconciliation, migration and nationality, civil rights and surveillance, security and privacy, bureaucracy and inter...

  8. 强化土木工程专业工程实践能力培养的教学模式%Teaching mode of strengthening engineering practice ability cultivating of civil engineering specialty

    Institute of Scientific and Technical Information of China (English)

    李素娟; 柳丽霞

    2016-01-01

    According to the current development direction of higher education, this paper analyzed the teaching insufficiency of current theoretical teaching and practice education of civil engineering profession.To stimulate students' interest and reinforce the engineering practice ability of them, it was put forward the mode including curriculum reform, practice teaching reform and other auxiliary teaching in this professional comprehensive reform.Practice showed that the new teaching model enhanced the students' learning initiative, improved the effect of classroom teaching and class visiting, which was beneficial to the development of the professional engineering practice ability.%根据高等教育的发展方向,分析了土木工程专业当前理论教学和实践教学存在的不足,本着激发学生专业兴趣,强化工程实践能力培养的原则,在理论教学环节、实践教学环节以及其他辅助教学环节进行改革.实践证明:新的教学模式提高了学生学习的积极性,改善了课堂授课及听课效果,有利于专业工程实践能力的培养.

  9. Neuroimaging of the Philadelphia neurodevelopmental cohort.

    Science.gov (United States)

    Satterthwaite, Theodore D; Elliott, Mark A; Ruparel, Kosha; Loughead, James; Prabhakaran, Karthik; Calkins, Monica E; Hopson, Ryan; Jackson, Chad; Keefe, Jack; Riley, Marisa; Mentch, Frank D; Sleiman, Patrick; Verma, Ragini; Davatzikos, Christos; Hakonarson, Hakon; Gur, Ruben C; Gur, Raquel E

    2014-02-01

    The Philadelphia Neurodevelopmental Cohort (PNC) is a large-scale, NIMH funded initiative to understand how brain maturation mediates cognitive development and vulnerability to psychiatric illness, and understand how genetics impacts this process. As part of this study, 1445 adolescents ages 8-21 at enrollment underwent multimodal neuroimaging. Here, we highlight the conceptual basis for the effort, the study design, and the measures available in the dataset. We focus on neuroimaging measures obtained, including T1-weighted structural neuroimaging, diffusion tensor imaging, perfusion neuroimaging using arterial spin labeling, functional imaging tasks of working memory and emotion identification, and resting state imaging of functional connectivity. Furthermore, we provide characteristics regarding the final sample acquired. Finally, we describe mechanisms in place for data sharing that will allow the PNC to become a freely available public resource to advance our understanding of normal and pathological brain development. © 2013 Elsevier Inc. All rights reserved.

  10. On Cultivation of Skilled Professionals in Civil Engineering and Architecture in China%我国土木建筑类专业技能性人才培养刍议

    Institute of Scientific and Technical Information of China (English)

    李辉政

    2016-01-01

    As important engineers and technicians, skilled professionals in civil engineering and architecture are becoming rare for lack of stress by high-er education and the problem of aging. This paper, from the development trend of civil engineering and construction market, explores the demand for skilled professionals, analyzes the current education situation of civil engineering and architecture majors, and, finally, discusses how to cultivate skilled professionals in higher vocational education for enterprises.%土木建筑类技能性人才处于工程技术人才中的第一线,因不被高等院校所重视而随着城市化的发展、人口的老龄化而处于稀缺状态。文章首先从土木建筑市场的发展趋势,对技能人才的需求程度进行探索,然后对当今高职土木建筑类专业教育现状进行分析,最后就如何在高职院校创新培养出企业需求旺盛的技能性人才进行探讨。

  11. Designing and Creating a Set of New Lab Experiments for a Traditional Fluid Mechanics Course in Civil Engineering

    Science.gov (United States)

    Budny, Dan

    2013-11-01

    Many fluids lab facilities and their associated student experiences were built back in the 1960-1970 time frames. They typically consisted of large facilities that included wind tunnels, flumes, wet wells, pump stations, etc. Today these labs are physically and pedagogically out dated and the need for lab space is forcing the closing of large scale labs. This is the same basic problem within the Swanson School of Engineering at the University of Pittsburgh. Thus we have replaced all the old equipment and lab experiences with small bench top experiments with a focus on applying the large body of knowledge associate with better student learning experiences. This paper will describe the concepts behind the design of the new experiments and the learning improvements discovered as a result of moving from a few large experiments to a larger number of smaller scale experiments.

  12. The Small Helm Project: an academic activity addressing international corruption for undergraduate civil engineering and construction management students.

    Science.gov (United States)

    Benzley, Steven E

    2006-04-01

    This paper presents an academic project that addresses the issue of international corruption in the engineering and construction industry, in a manner that effectively incorporates several learning experiences. The major objectives of the project are to provide the students a learning activity that will 1) make a meaningful contribution within the disciplines being studied; 2) teach by experience a significant principle that can be valuable in numerous situations during an individual's career, and 3) engage the minds, experiences, and enthusiasm of the participants in a real ethical challenge that is prevalent in all of their chosen professional fields. The paper describes the full details of the project, the actual implementation of it during Winter Semester 2005, the experiences gained during the initial trial, and the modifications and improvements incorporated for future implementation.

  13. Review of the seismic risk in the design of civil engineering of nuclear installations excepted the long term storage of radioactive wastes; Prise en compte du risque sismique a la conception des ouvrages de genie civil d'installations nucleaires de base a l'exception des stockages a long terme des dechets radioactifs

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    This guide aims to define, for the nuclear installations excepted the long term storage of radioactive wastes, from site data, the design specifications of earthquake resistant civil engineering and the possible methods for: the determination of the seismic response of the buildings, taking into account the interactions with the materials and the evaluation of the associated strains to size the installation; the determination of seismic displacements to be considered to size the materials. (A.L.B.)

  14. Civil Identity

    DEFF Research Database (Denmark)

    Petersen, Lars Axel

    scanning, etc., to discussions of Shari'a law versus common civil law in India; from the study of religious cult in ancient city states to the processes of constitutional reconstruction in former Communist countries; and from attempts at conflict resolution and prevention between Jewish and Arab citizens......In this paper I will go through a catalogue of examples of contexts in which the term civil identity is currently used, ranging from the formal and technical process of linking a set of administrative and other events to an individual biological person by means of identity cards, fingerprints, iris...... of technology and of law. If such a field can be established, the answers to those questions might be relevant to such contemporary issues as inter-ethnic, religious, and -cultural conflict or reconciliation, migration and nationality, civil rights and surveillance, security and privacy, bureaucracy and inter...

  15. GPR applications in civil engineering collaborating with a Company and preparation of material for the educational package to teach in Universities. STSM, COST Action TU1208

    Science.gov (United States)

    Sossa, Viviana; Assunção, Sonia; Pérez, Vega

    2017-04-01

    The STSM, Short-Term Missions, was carried out with the support of Murphy Survey company from Dublin - Ireland, was proposed for to Develop a module "GPR Applications in Archaeology" of the educational pack defined in the different meetings of the Cost Action TU 1208. The employ of GPR is mainly determined by the limits and uncertainties associated to this technique that affects to the measurements and the results. Private companies and end-users are highly interested in known the limits associated to particular cases and the advantages of the methodology compared to other studies. During this STSM, we plan to prepare a field survey, analyzing the possible problems and defining the objectives, and to acquire data to assess the structure. This data will be analyzed and processed in order to determine the limits of the technique in the particular case. The results will be compared to other surveys, in order to determine some clear restrictions that the company need to take into account in further works. Aknowledgments: This work has been partially funded by the EU COST Action TU1208, "Civil Engineering Applications of Ground Penetrating Radar", and it is a contribution to the working group 2.2 tasks in the COST Action TU1208.

  16. Innovative Talents Cultivating Model for Applied Civil Engineering Programs%应用型土木工程专业创新人才培养模式探析

    Institute of Scientific and Technical Information of China (English)

    孙路; 何延宏; 王宇; 李玉胜

    2014-01-01

    文章通过对应用型本科院校土木工程专业存在的问题进行分析,提出适合学校发展定位的校企共建办学模式,符合国际标准的创新人才培养模式,“双师型”教师队伍建设和课程与教学资源建设等一系列创新人才培养体系的构建方法,并在实践中运行、检验,在教学研究、实践能力、社会资源、学生就业和学科竞赛取得了一些实际成效,以期为同类院校提供借鉴和帮助。%The problems in the programs of civil engineering are analyzed ,based on which some suggestions are proposed .There should be a school-company collaborative training pro-gram,which complies with the international standard of talents training .The “trans-disciplina-ry” teaching team and teaching resource are also necessary .so far,the achievements in practice ( examination ,teaching research ,competence of practice ,social resource ,employment and disci-pline competition ) may of great help for schools of the same type to borrow .

  17. 土木工程投标报价模型研究(英)%An Offer Model for Civil Engineering Construction

    Institute of Scientific and Technical Information of China (English)

    卢德林; 章祥荪; 糜莺英

    2001-01-01

    本文主要研究单一不可分土木工程的n人投标报价模型.报价高低不是是否中标的唯一决定性因素,施工方案和工程报价为赢得工程施工合同共同发挥组合效应,并且在一定条件下,通过工程竞标,中标价会趋于Nash平衡.%In this paper,we consider an offer model in which one indivisible civil-engineering project of unknown construction cost is tendered to n tenders.The offer is not the sole decisive factor which decides who will get the contract,the tendering plan and the offer can play an important combinatorial role in the competition,and the winner's final offer via the procedure of competitive bidding tends to the symmetric Nash equilibrium in both the probabilistic sense and the economic sense.

  18. Two treatment methods for stormwater sediments--pilot plant and landfarming--and reuse of the treated sediments in civil engineering.

    Science.gov (United States)

    Petavy, F; Ruban, V; Conil, P; Viau, J Y; Auriol, J C

    2009-07-01

    The aim of this research was to present a pilot plant for the treatment of stormwater sediments and to compare the decontamination rate to that obtained by landfarming. The possibilities for reuse of the treated sediments in civil engineering are also studied. Four sediments from retention/infiltration ponds or from street sweeping were studied. In each case organic matter (OM), total hydrocarbons (TH) and polycyclic aromatic hydrocarbons (PAH) were measured. Geotechnical tests were carried out to evaluate the reuse possibilities of the treated sediments. Treatment by means of the pilot plant was efficient at reducing TH and PAH concentrations: THs were reduced by 53-97% and PAHs were decreased by 60-95%. By comparison, a reduction of 45-75% in TH concentration is obtained with landfarming, whereas there is no significant decrease in PAHs. Furthermore, geotechnical tests showed that the treated fractions from the pilot plant can be reused as road embankments and as a capping layer. These results are most encouraging and show that stormwater sediments can valuably be reused after treatment in a pilot plant. Landfarming is less efficient but this technique could be used as a pretreatment in the case of high TH pollution.

  19. MRO oriented civil aircraft engine removal date prediction system%面向MRO的民航发动机拆发日期预测系统

    Institute of Scientific and Technical Information of China (English)

    雷达; 钟诗胜

    2013-01-01

    Aiming at the business requirements of Maintenance,Repair and Operations (MRO) for civil aircraft engine,a software system for engine removal date prediction was developed.The system predicted the removal date of the on-wing engines according to three types of factors affecting the service of the aircraft engine,which were performance,fault and time limit.The concept of damage baseline was proposed by considering the factors that the major fault of the aircraft core engine was always limited,and a damage propagation model based on linear degradation path was established to realize the removal date prediction based on hardware damage fault.This system was currently in service in Air China Limited,and was seamlessly integrated with the existing engine health management and maintenance decision support system via interfaces as a subsystem.The developed system obtained support data from its parent system and provided the prediction results for its parent system as support data.Thus an integrated process was formed including the engine condition monitoring process,the removal date prediction process and the maintenance decision-making process,which satisfied the MRO requirements of Air China Limited.%针对民航发动机维护、维修和大修的业务需求,开发了民航发动机拆发日期预测系统.系统可以根据影响民航发动机使用的性能、故障和时限三类因素,对在翼民航发动机进行拆发日期预测.考虑到故障因素中的硬件损伤数据样本偏少,提出损伤基线的概念,并建立了基于线性退化轨道的硬件损伤发展模型,实现了基于硬件损伤故障的发动机拆发日期预测.该系统应用于中国国际航空股份有限公司(国航),并且通过接口与其现有的发动机健康管理和维修决策支持系统实现无缝集成,成为其子系统.系统从母系统中获得支撑数据并将预测结果提供给母系统,作为维修计划制定模块的支撑数据,从而使发动机状

  20. Analysis and Optimization of Logistics Management Mode of Large-scale Civil Engineering Projects%大型土木工程的物流管理模式优化分析

    Institute of Scientific and Technical Information of China (English)

    秦小玉; 杨乔

    2013-01-01

    In this paper,in accordance with the general characteristics of the logistics operation of large-scale civil engineering projects,we analyzed the material purchasing,warehousing management and distribution of large-scale civil engineering projects and then proposed the optimizing measures to segment the material purchasing management mechanism,improve warehousing operation level,and enhance the material distribution system.%根据大型土木工程的一般物流运作特点,对大型土木工程的物资采购、仓储管理与配送进行了分析研究,提出了细化物资采购管理控制、提升仓储作业水平、优化物资配送体系等优化措施.

  1. 地方高校土木工程专业创新创业训练研究与实践%Research and practice on innovation and entrepreneurship training of civil engineering specialty in local colleges and universities

    Institute of Scientific and Technical Information of China (English)

    方光秀

    2016-01-01

    Illustrated by the example of innovation and entrepreneurship training of civil engineering in Yanbian University. Meanwhile,we put forward measures on demonstrating the mid-term examination,acceptance of the project management and security,and provide reference to further strengthening and standard the work of innovation and entrepreneurship training of civil engineering specialty in local colleges and universities.%以基于产学研的延边大学土木工程专业的创新创业训练为例,介绍了创新创业训练的主要内容与实施方法,同时提出了中期检查及项目验收管理措施,为进一步规范和加强地方高校土木工程专业创新创业训练工作提供借鉴。

  2. 新加坡土木工程高等教育国际化的主要做法及启示%Internationalization of higher education in civil engineering of Singapore: measures and revelation

    Institute of Scientific and Technical Information of China (English)

    陈曦

    2011-01-01

    The remarkable achievements attained by higher education of civil engineering in Singapore have been widely recognized.Chinese is the main composition of Singaporean,the culture of Singapore is the same with China,so compared with other countries its higher education has much more reference to Chinese higher education in civil engineering.Referring to the higher education of civil engineering in Singapore,the strategies adopted during the internationalization process of its higher education are introduced.Some opinions are expressed and some advices are given,hoping that they should be beneficial to the internationalization of higher education of civil engineering in China.%新加坡土木工程高等教育所取得的显著成绩已经得到世界广泛认同。新加坡以华人为主体,文化传统与中国相似,与其他发达国家相比,新加坡土木工程高等教育对中国土木工程高等教育的国际化更具借鉴意义。笔者以新加坡土木工程高等教育为例,分析了其先进之处及其国际化所采用的策略,并从土木工程学科、教学体系,基础设施和科研环境、师资力量,以及生源等方面为中国土木工程高等教育的发展和国际化提出了若干建议,以期对中国土木工程高等教育的国际化发展有所裨益。

  3. 19 January 2011 - British University of Manchester, Vice-President and Dean for the Faculty of Engineering and Physical Sciences Professor of Structural Engineering School of Mechanical, Aerospace and Civil Engineering C. Bailey in CERN Control Centre with Department Head P. Collier; at LHCb with R. Lindner and ATLAS underground experimental area with Deputy Spokesperson D. Charlton, througout accompanied by . Collier with R. Appleby and F. Loebinger

    CERN Multimedia

    Maximilien Brice

    2011-01-01

    19 January 2011 - British University of Manchester, Vice-President and Dean for the Faculty of Engineering and Physical Sciences Professor of Structural Engineering School of Mechanical, Aerospace and Civil Engineering C. Bailey in CERN Control Centre with Department Head P. Collier; at LHCb with R. Lindner and ATLAS underground experimental area with Deputy Spokesperson D. Charlton, througout accompanied by . Collier with R. Appleby and F. Loebinger

  4. Civil Disobedience.

    Science.gov (United States)

    Martz, Carlton

    2000-01-01

    This theme issue looks at three historical and recent instances of civil disobedience. The first article examines the Free Speech Movement, which arose on the Berkeley campus of the University of California in the 1960s. The second article recounts the struggle of Mahatma Gandhi to free India from the British Empire. The final article explores the…

  5. Progress of system identification with statistical methods in civil engineering%土木工程系统辨识统计方法的现状与展望

    Institute of Scientific and Technical Information of China (English)

    李炜明; 董莪; 朱宏平

    2012-01-01

    It is important to explore statistical methods for system identification in civil engineering, because of dispersal in material properties, complexity of a structural system and randomness of environment. The system identification in civil engineering was defined here. Five statistical methods were investigated, they were Bayesian probabilistic approach, stochastic finite element method, statistical pattern recognition, statistical discrimination of features for damage detection and the other methods. The further developments of statistical methods for system identification in civil engineering were discussed based on the published investigations.%土木工程由于内在材料的离散性,结构体系的复杂性,外在环境因素的随机性,有必要引入统计方法来进行面向健康监测的损伤辨识.探讨了土木工程系统辨识的定义,分析了现有研究中与统计方法相关的Bayesian统计、随机有限元、统计模式辨识、损伤特征辨识的统计描述及其他等五类研究;根据土木工程系统辨识的特点与已有研究,展望了统计方法进一步的研究前景与方向.

  6. Teaching practice of Civil engineering drawing Under the modern education technology%现代教育技术条件下《土木工程制图》的教学实践

    Institute of Scientific and Technical Information of China (English)

    林志维

    2013-01-01

      从土木工程专业高职高专对人才培养要求出发,阐述了《土木工程制图》课程的特点,分析了传统制图教学方法的优势,应用现代教育技术手段在制图课程的教学成效,并对现代教育技术下《土木工程制图》教学实践进行了初步探讨。%The article expounds the characteristics of the "civil engineering drawing" course, analyzes the advantage of teaching method in traditional drawing, From the requirement of talent cultivation in civil engineering college. And preliminary study of the teaching practice of "civil engineering drawing" under the modern education technology, according to the teaching effect of drawing course using modern education technology.

  7. Camtasia Studio软件在土木工程开放课程制作中的应用%The Application of Camtasia Studio Software in the Open Course Manufacture of Civil Engineering

    Institute of Scientific and Technical Information of China (English)

    董世成; 赵冬梅

    2013-01-01

    Taking the Civil Engineering Specialized Introduction as an example, the author discussed the application technology of Camtasia Studio software in the open course manufacture of civil engineering and the methods of software installation, video making and post-processing. It briefly analyzed the advantages of the software in the teaching, and provided a good solution in the open course manufacture of civil engineering.%  作者以《土木工程专业概论》课程为例,探讨了Camtasia Studio软件在土木工程开放课程制作的应用技术,阐述了软件安装、视频制作和后期处理的方法,简要分析了该软件在教学中应用的优越性,为土木工程开放课程制作提供了良好的解决方案。

  8. Philadelphia-negative chronic myeloproliferative neoplasms

    Directory of Open Access Journals (Sweden)

    Rosane Isabel Bittencourt

    2012-01-01

    Full Text Available Chronic myeloproliferative diseases without the Philadelphia chromosome marker (Ph-, although first described 60 years ago, only became the subject of interest after the turn of the millennium. In 2001, the World Health Organization (WHO defined the classification of this group of diseases and in 2008 they were renamed myeloproliferative neoplasms based on morphological, cytogenetic and molecular features. In 2005, the identification of a recurrent molecular abnormality characterized by a gain of function with a mutation in the gene encoding Janus kinase 2 (JAK2 paved the way for greater knowledge of the pathophysiology of myeloproliferative neoplasms. The JAK2 mutation is found in 90-98% of polycythemia vera and in about 50% essential thrombocytosis and primary myelofibrosis. In addition to the JAK2 mutation, other mutations involving TET2 (ten-eleven translocation, LNK (a membrane-bound adaptor protein; IDH1/2 (isocitrate dehydrogenase 1/2 enzyme; ASXL1 (additional sex combs-like 1 genes were found in myeloproliferative neoplasms thus showing the importance of identifying molecular genetic alterations to confirm diagnosis, guide treatment and improve our understanding of the biology of these diseases. Currently, polycythemia vera, essential thrombocytosis, myelofibrosis, chronic neutrophilic leukemia, chronic eosinophilic leukemia and mastocytosis are included in this group of myeloproliferative neoplasms, but are considered different situations with individualized diagnostic methods and treatment. This review updates pathogenic aspects, molecular genetic alterations, the fundamental criteria for diagnosis and the best approach for each of these entities.

  9. Role of employers in the process of Civil Engineering curriculum development: A case in Poland = El papel de los empleadores en el desarrollo curricular de los Ingenieros Civiles: Un caso en Polonia

    Directory of Open Access Journals (Sweden)

    Marta Kosior-Kazberuk

    2017-04-01

    áticos Abstract The latest amendments to the Law on Higher Education strengthened the role and importance of cooperation between the universities and socio-economic environment. The idea of curriculum based on learning outcomes should facilitate cooperation of universities with external stakeholders (e.g. employers, representatives of professional organizations in the process of educational offer development. The employers expect graduates to have a high level of competence that are a synthesis of theoretical knowledge, practical skills and personal features. In their opinion, the role of the education system is to  prepare  graduates practically for the profession and to provide them with a wide array of professional skills. Most frequently mentioned weakness of university graduates is the lack of experience and practical skills. Initially, the participation of employers in curriculum design was symbolic. It was the result of lack of interest or the requirement for graduates for very specific skills needed for a given position in the company. The participation of employers in the curriculum design and evaluation of its quality has increased since the representatives of employers were included in the external evaluation committees. The most effective forms of employers' participation in creating a curriculum of study e.g. dual study, common post-graduate study, internships, technical trips, dedicated lectures etc. were discussed on the basis of civil engineering in technical university. The participation of employers is increasingly more conscious. However, there is still a need to seek mechanisms and methods for consulting that would really involve employers into cooperation, and at the same time would not generate more red tape on any side.

  10. 土建类大学毕业生价值观调查研究%Investigation on Values of College Graduate Students Majoring in Civil Engineering

    Institute of Scientific and Technical Information of China (English)

    王惠玉; 王力琼; 赵磊

    2011-01-01

    The values of 436 college students of 3 majors in civil engineering graduated in 2011 were investigated by using the questionnaire method, where the questions were mainly selected from the 'World Values Survey,China 2007,[8]designed by Research Center for Contemporary China of Peking University. The research data were then analyzed by statistics and non-metric dimensional scaling method. The results showed that these students had positively patriotism and national pride, and were very interested in society, politics, science progresses and life meanings with the similar understandings or opinions. Happy family was the primary life goal only followed by career success for the most students. The relationships among 10 basic values defined by Schwartz were much different for students with different majors, genders, residences before college life,consumptions,provinces,one-child or multi-child families, which indicated those factors have some impact on the values of the students. For the whole sample, 10 basic values of civil engineering students newly graduated from university had the characteristics of clustering. Hedonism and power were negatively related to the other values,and the distribution of achievement value was much different from the structural relationship proposed by Schwartz and testified by many other overseas researches, which might be attributed to the deferent understandings of achievement between the Eastern culture and Western culture. The methods and results could be referred to the research and education for college students.%选择北京大学国情研究中心编制的《2007年全国公民价值观状况调查问卷》[8]中的部分问题,采用问卷调查的方法,对436名2011届土建类部分专业的大学毕业生进行价值观调查.对调研数据采用数理统计和多尺度降维方法进行相关性分析.结果表明:土建类毕业生大多具有较高的爱国热情和民族自豪感,对社会、政治、科技进步和人

  11. Design and testing of Ground Penetrating Radar equipment dedicated for civil engineering applications: ongoing activities in Working Group 1 of COST Action TU1208

    Science.gov (United States)

    Pajewski, Lara; Manacorda, Guido; Persico, Raffaele

    2015-04-01

    This work aims at presenting the ongoing research activities carried out in Working Group 1 'Novel GPR instrumentation' of the COST (European COoperation in Science and Technology) Action TU1208 'Civil Engineering Applications of Ground Penetrating Radar' (www.GPRadar.eu). The principal goal of the COST Action TU1208 is to exchange and increase scientific-technical knowledge and experience of GPR techniques in civil engineering, simultaneously promoting throughout Europe the effective use of this safe and non-destructive technique in the monitoring of infrastructures and structures. Working Group 1 (WG1) of the Action focuses on the development of innovative GPR equipment dedicated for civil engineering applications. It includes three Projects. Project 1.1 is focused on the 'Design, realisation and optimisation of innovative GPR equipment for the monitoring of critical transport infrastructures and buildings, and for the sensing of underground utilities and voids.' Project 1.2 is concerned with the 'Development and definition of advanced testing, calibration and stability procedures and protocols, for GPR equipment.' Project 1.3 deals with the 'Design, modelling and optimisation of GPR antennas.' During the first year of the Action, WG1 Members coordinated between themselves to address the state of the art and open problems in the scientific fields identified by the above-mentioned Projects [1, 2]. In carrying our this work, the WG1 strongly benefited from the participation of IDS Ingegneria dei Sistemi, one of the biggest GPR manufacturers, as well as from the contribution of external experts as David J. Daniels and Erica Utsi, sharing with the Action Members their wide experience on GPR technology and methodology (First General Meeting, July 2013). The synergy with WG2 and WG4 of the Action was useful for a deep understanding of the problems, merits and limits of available GPR equipment, as well as to discuss how to quantify the reliability of GPR results. An

  12. Research on the whole optimization in mechanics series courses of civil engineering specialty%土建类专业力学系列课程整体优化研究

    Institute of Scientific and Technical Information of China (English)

    黄超; 刘德华; 程光均; 文国治; 谭周玲; 肖明葵

    2012-01-01

    Mechanics series courses are the important basic courses of civil engineering education.The traditional teaching system is hard to adapt to the current situation that credit hours are decreased.Based on the whole optimization in mechanics series courses of civil engineering education,this paper puts forward the new teaching system of civil series course.The teaching practice shows that the new system is remarkable to improve the quality of teaching effect.%力学系列课程是土建类专业的重要基础课,而传统教学体系已很难适应新时期下学时减少而要求更高的教学需要。在力学系列课程整体优化的基础上,笔者提出了土建类专业力学系列课程新教学体系。教学改革实践表明,该新体系对提高教学质量效果显著。

  13. 浅谈Civil 3D在大化路隧道工程中的应用%Brief talk about Civil 3D Application to Dahua Road Tunnel Engineering

    Institute of Scientific and Technical Information of China (English)

    陶海波; 喻杰炽; 罗琦

    2015-01-01

    AutoCAD Civil 3D作为一款面向土木工程的BIM解决方案,不仅包含了CAD的全部功能,而且还可以实现三维设计,方便了工程建模设计及工程量的计算.文章以隧道设计为例,通过建立地形曲面、创建平面路线及纵断面和横断面设计等步骤介绍了Civil 3D的主要设计过程,并构建了统一的三维信息模型进行土方计算.通过实践应用,总结出了Civil 3D在市政工程设计中应用的主要优点及在隧道设计中的应用前景.

  14. ATLAS Civil Engineering Point 1

    CERN Multimedia

    Jean-Claude Vialis

    2000-01-01

    Point 1 -the zone for the ATLAS experiment. The film includes various stages of construction, especially from the pit of UX 15. Underground work includes the excavation work of the cavern, demolishing the central pillars and posing the support bars for the pit. The UX 15 - will shelter the detector itself. The cavern is located about 100 m below the surface and it is 53 m long, 30 m wide and 34.90 m high.

  15. ATLAS Civil Engineering Point 1

    CERN Multimedia

    2000-01-01

    Different phases of realisation to Point 1: zone of the ATLAS experiment 18-10-2000 UX 15 cavern and PX16 15-12-2000 USA 15 - UX 15 concreting the arch 14-02-2001 UX 15 - ancrages, isolation and scaffolding

  16. ATLAS: civil engineering Point 1

    CERN Multimedia

    2000-01-01

    The ATLAS experimental area is located in Point 1, just across the main CERN entrance, in the commune of Meyrin. There people are busy to finish the different infrastructures for ATLAS. Real underground video. Nice view from the surface to the cavern from the pit side - all the big machines looked very small. The film has original working sound.

  17. ATLAS: civil engineering Point 1

    CERN Multimedia

    1998-01-01

    Different phases of the SX 15 realisation to Point 1 : zone of the ATLAS experiment 00:13:43 Realization of the concrete floor 19-10-1998 00:29:26 Putting up the metal rails for the roof 19-10-1998 00:33:42 Road alignment entering to POINT1 and in Bollot wood 27-10-1998 00:41:53 General sight of the buildings in construction Building SX gives the cover for the work at the experiment It is used to shelter the Pit and the work for the underground cavern as well as for covering the ground work with big cranes that allows the lowering of the components belonging to the detector. The hall is also used as a detector part storage and cover during the assembly. It shelters small workshops of mechanics and electronics necessary for the assembly and the maintenance of the ATLAS experiment.

  18. ATLAS: civil engineering Point 1

    CERN Multimedia

    2000-01-01

    The construction work at point one was a massive site including overground and underground work. Point 1 under construction is worth to see.Tools and machinery used during the construction and the multible scenes with people working in different parts of point1. Scenes from the 3D CAD office and some talking in english. Printing out drawings and later views of the empty tunnel were the LHC accelerator is installed 80m under the surface.The film gives the view to the close history in other words to the time before the installations.

  19. ATLAS Civil Engineering Point 1

    CERN Multimedia

    Jean-Claude Vialis

    2000-01-01

    Different phases of realisation to Point 1 : zone of the ATLAS experiment The ATLAS experimental area is located in Point 1, just across the main CERN entrance, in the commune of Meyrin. There people are ever so busy to finish the different infrastructures for ATLAS. Real underground video. When passing throw the walls the succeeding can be heard and seen. The film has original working sound.

  20. ATLAS Civil Engineering Point 1

    CERN Multimedia

    Jean-Claude Vialis

    2000-01-01

    Different phases of realisation to Point 1 : zone of the ATLAS experiment The film is about the excavation work in the cavern and tunnels of ATLAS experiment in the point 1. You can see people working for iron mounting at the side of the pit where the parts of the detector will be lowered in the future. Partly the film concentrates the USA 15 and the work done there.

  1. ATLAS Civil Engineering Point 1

    CERN Multimedia

    Jean-Claude Vialis

    1999-01-01

    Different phases of realisation to Point 1 : zone of the ATLAS experiment The ATLAS experimental area is located in Point 1, just across the main CERN entrance, in the commune of Meyrin. There people are ever so busy to finish the different infrastructures for ATLAS. Real underground video. The film has original working sound.

  2. ATLAS: civil engineering Point 1

    CERN Document Server

    Jean-Claude Vialis

    1998-01-01

    Different phases of the SX 15 realisation to Point 1 : zone of the ATLAS experiment 00:13:43 Realization of the concrete floor 19-10-1998 00:29:26 Putting up the metal rails for the roof 19-10-1998 00:33:42 Road alignment entering to POINT1 and in Bollot wood 27-10-1998 00:41:53 General sight of the buildings in construction Building SX gives the cover for the work at the experiment It is used to shelter the Pit and the work for the underground cavern as well as for covering the ground work with big cranes that allows the lowering of the components belonging to the detector. The hall is also used as a detector part storage and cover during the assembly. It shelters small workshops of mechanics and electronics necessary for the assembly and the maintenance of the ATLAS experiment.

  3. ATLAS Civil Engineering Point 1

    CERN Multimedia

    2001-01-01

    Different phases of realisation to Point 1: zone of the ATLAS experiment 14-02-2001Realising anchorage, isolations and scaffoldings at UX 15 18-04-2001Concreting the arch and posing the metal reinforcements at UX 15

  4. ATLAS Civil Engineering Point 1

    CERN Multimedia

    Jean-Claude Vialis

    1998-01-01

    Different phases of the PX 15 realisation to Point 1: zone of the ATLAS experiment 19-11-1998 Realisation of the Walkway for PX 15 and the putting up scaffolds 15-01-1999 Film from the surface of Point 1 and descent in the well of PX 15

  5. Expert Systems in Civil Engineering.

    Science.gov (United States)

    1986-01-01

    preparation for the next evaluation. Zozaya- Gorostiza and Hendrickson (18,p.4) allude to the importance of this for sensitivity analysis (i.e.- modifying...Intellignce, 2nd ed., Addison-Wesley Publishing Company, Inc., Reading,1984. Zozaya- Gorostiza , Carlos and Chris Hendrickson, An Expert 8ystem for

  6. Responsabilidade civil

    OpenAIRE

    Dalanhol, André

    2002-01-01

    Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro Tecnológico. Programa de Pós-Graduação em Engenharia de Produção. 1. INTRODUÇÃO - aborda o tema Responsabilidade Civil - Reparação do Dano Moral Ambiental, de forma sucinta, justificando sua aplicabilidade no direito brasileiro, discorrendo acerca de cada etapa do trabalho; 2. MEIO AMBIENTE - CONCEITO - proposta de um conceito mais amplo de meio ambiente, que melhor se coadune com a realidade atual, uma vez que os con...

  7. Radio communications with extra-terrestrial civilizations

    Science.gov (United States)

    Kotelnikov, V. A.

    1974-01-01

    Communications between civilizations within our galaxy at the present level of radio engineering is possible, although civilizations must begin to search for each other to achieve this. If an extra-terrestrial civilization possessing a technology at our level wishes to make itself known and will transmit special radio signals to do this, then it can be picked up by us at a distance of several hundreds of light years using already existing radio telescopes and specially built radio receivers. If it wishes, this civilization can also send us information without awaiting our answer.

  8. Knowing more than they can tell: An assessment of genre awareness among students in writing intensive zoology and civil engineering courses

    Science.gov (United States)

    Hanson, Joleen Kidwell

    Developing genre awareness as a means of "learning how to learn" in new writing situations is a goal of four recently proposed writing pedagogies that recognize the context-dependent nature of standards for "good writing" (Devitt, Reiff, and Bawarshi (2004); Beaufort (2007); Johns (2008); Downs and Wardle (2007)). Yet other scholars argue that useful genre knowledge cannot be taught explicitly in the classroom, but must be acquired tacitly through participation in a workplace or other discourse community (Dias et al. (1999); Freedman (1994); Smit (2004)). This qualitative study investigates the range of variability and potential sources of genre awareness among undergraduates who had not received explicit teaching about genre awareness. It presents students' explicit understanding of why particular genre conventions are followed in a particular context by examining what they could tell about learning the advanced lab report in writing-in-the-major courses in either Zoology or Civil Engineering. Research data includes surveys of all students in three courses (n=112), interviews with a subset in each course (n=24) and with all instructors (n=7), samples of graded student lab reports, and classroom observations. Overall, few study participants demonstrated genre awareness as defined by Devitt. Students showed limited awareness of the rhetorical purposes of the advanced lab report and even less awareness of the values and beliefs embedded in its discourse conventions. Disciplinary identification and mentoring experiences were found to be factors that might contribute to the development of genre awareness. Unexpected findings were that some insecure writers showed relatively high overall genre awareness, while some confident writers showed relatively low genre awareness. Further research is needed to refine an assessment instrument that could be readily used by other researchers. However, the instrument for assessing genre awareness that was developed for this project

  9. 大型土建工程管理中成本控制增益均衡模型%The Cost Control Gain Equilibrium Model of The Large Civil Engineering Management

    Institute of Scientific and Technical Information of China (English)

    胡晓娟

    2015-01-01

    The increased cost of construction. For this, put forward a large civil engineering management cost control gain equilibrium model, using the data from the civil engineering construction of construction cost estimates, cost control gain balance model is established, through the forecast data and actual cost error gain balance calculation, the process of the project cost control for minimum error value. The simulation experiment indicates that the gain equalization algorithm can effectively improve the efficiency of soil construction cost management, reduce the error of cost management at the same time, with the most effective the most reasonable method, to budget, cost effective for the management of civil engineering to provide better protection.%提出大型土建工程管理中成本控制增益均衡模型,利用土建工程相关施工数据,对施工建设做成本预估,建立成本控制增益均衡模型,通过预估数据与实际成本误差进行增益均衡计算,使工程成本控制得到最小误差值的过程.仿真试验表明,这种增益均衡算法更能有效的提高土建工成本管理的效率,同时降低成本管理的误差,以最有效最合理的方法,对成本进行预算,有效的为土建工程的管理提供更好的保障.

  10. Technology of strain measurement based on Fabry-Perot optical fiber sensor in monitoring of civil engineering%土木工程健康监测用F-P光纤应变测量技术

    Institute of Scientific and Technical Information of China (English)

    周智; 边玉明; 田石柱

    2001-01-01

    介绍了基于白光干涉的光纤F-P应变传感器原理,对其用于土木工程健康监测的安装工艺、温度补偿技术进行了研究,提出了工程应用中尚存的问题。%The theory of optical fiber Febry-Perot strain sensor based on white light interferometer is introduced. Then, the technics of installation of F-P strain sensor in civil engineering and the compensating of temperature strain are studied. Finally, some problems are brought forward.

  11. EDITORIAL: Adaptive and active materials: Selected papers from the ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 10) (Philadelphia, PA, USA, 28 September-1 October 2010) Adaptive and active materials: Selected papers from the ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 10) (Philadelphia, PA, USA, 28 September-1 October 2010)

    Science.gov (United States)

    Brei, Diann

    2011-09-01

    The third annual meeting of the AMSE/AIAA Smart Materials, Adaptive Structures and Intelligent Systems Conference (SMASIS) took place in the heart of historic Philadelphia's cultural district, and included a pioneer banquet in the National Constitutional Center. The applications emphasis of the 2010 conference was reflected in keynote talks by Dr Alan Taub, vice president of General Motors global research and development, 'Smart materials in the automotive industry'; Dr Charles R Farrar, engineering institute leader at Los Alamos National Laboratory, 'Future directions for structural health monitoring of civil engineering infrastructure'; and Professor Christopher S Lynch of the University of California Los Angeles, 'Ferroelectric materials and their applications'. The SMASIS conference was divided into six technical symposia each of which included basic research, applied technological design and development, and industrial and governmental integrated system and application demonstrations. The six symposia were: SYMP 1 Multifunctional Materials; SYMP 2 Active Materials, Mechanics and Behavior; SYMP 3 Modeling, Simulation and Control; SYMP 4 Enabling Technologies and Integrated System Design; SYMP 5 Structural Health Monitoring/NDE; and SYMP 6 Bio-inspired Smart Materials and Structures. In addition, the conference introduced a new student and young professional development symposium. Authors of papers in the materials areas (symposia 1, 2 and 6) were invited to write a full journal article on their presentation topic for publication in this special issue of Smart Materials and Structures. This set of papers demonstrates the exceptional quality and originality of the conference presentations. We are appreciative of their efforts in producing this collection of highly relevant articles on smart materials.

  12. Environmental criteria to incorporate into civil engineering studies and projects to improve environmental impact assessment proceeding; Criterios ambientales a incorporar en proyectos de ingenieria civil para favorecer el procedimiento de Evaluacion de Impacto Ambiental

    Energy Technology Data Exchange (ETDEWEB)

    Lazano Valero, I.; Palacios Garcia de la Rosa, D.; Doncel Moratilla, A.; Iglesias Perez, L.; Ortega Santos, L.; Varela Nieto, J. M.; Garcia Sanchez-Colomer, M.

    2009-07-01

    This study fulfils the need of establishing a guideline for environmental conditions that could be used to designing stages in projects submitted to Environmental Impact Assessment (EIA), in order to consider minimal requirements not only to encourage EIA proceedings but also to reduce Environmental Impact Statement (EIS) contents. EIS from the last 10 year for different civil works projects (roads, railways, airports, dams, hidroelectrical power stations, river channelizations, pipelines, water transfers, ports and works in the coast) have been studied, extracting all the environmental conditions found. Effectiveness and real implementation of theses conditions have been analysed in different phases of the project development, which have allowed a characterization of a series of environmental conditions that could improve environmental assessments and authorities decisions for EIS. (Author) 6 refs.

  13. Blended Learning: Lessons from Best Practice Sites and the Philadelphia Context. PERC Research Brief

    Science.gov (United States)

    Beaver, Jessica K.; Hallar, Brittan; Westmaas, Lucas; Englander, Katie

    2015-01-01

    The Philadelphia Education Research Consortium--or PERC--was launched in August 2014 as an innovative partnership designed to provide research and analyses on some of the city's most pressing education issues. This partnership was forged among the School District of Philadelphia, Philadelphia's charter school sector, and Research for Action (RFA).…

  14. 工民建工程施工管理的现状问题与对策%Analysis of the Status Problems and Countermeasures of Civil Engineering Construction Management

    Institute of Scientific and Technical Information of China (English)

    潘海滨

    2013-01-01

    笔者长期从事建筑工程现场施工管理工作,本文首先对我国目前工民建工程施工管理的现状进行了分析,并根据现状中存在的问题提出了相应的对策,以提高工程的施工管理质量。%In this article, the author engaged in site construct-ion management of engineering construction for a long time. This article first carries out the analysis of the status quo of Chinese current civil engineering construction management and put forward the corresponding countermeasures based on the problems in the current situation in order to improve the construction management quality of project.

  15. Discussion on Problems and Reformation of Internship links of Civil Engineering Specialty%土木工程专业实习环节存在的问题和改革探讨

    Institute of Scientific and Technical Information of China (English)

    刘晓红

    2014-01-01

    The problems in the internship which was the practice teaching process of the architectural engineering direction of civil engineering specialty were described in this paper. Aiming at these problems, how to improve the quality of internship and develop the practical ability of students were analyzed and discussed. Some ideas and measures of the reform in practice teaching were proposed, in order to promote the teaching quality and improve the comprehensive quality of the students.%阐述了土木工程专业建筑工程方向实践教学中存在的问题,分析和探讨了提高实习质量和培养学生实践能力的途径,提出了实习教学改革措施,促进实习教学质量和学生综合素质的提高。

  16. The politics of urban informality in Philadelphia's recovery house movement.

    Science.gov (United States)

    Fairbanks II, Robert P

    2011-01-01

    There are some 60,000 vacant properties in the city of Philadelphia, 30,000 of which are abandoned row houses. In the neighbourhood of Kensington, street-level entrepreneurs have reconfigured hundreds of former working-class row homes to produce the Philadelphia recovery house movement: an extra-legal poverty survival strategy for addicts and alcoholics located in the city's poorest and most heavily blighted zones. The purpose of this paper is to explore, ethnographically, the ways in which informal poverty survival mechanisms articulate with the restructuring of the contemporary welfare state and the broader political economy of Philadelphia. It is argued that recovery house networks accommodate an interrelated set of political rationalities animated not only by retrenchment and the churning of welfare bodies, but also by the agency of informal operators and the politics of self-help. Working as an alternative and partially vestigial boundary institution or buffer zone to formal regimes of governance, the recovery house movement reflects the ‘other story’ of the new urban politics in Philadelphia.

  17. Actionable Intelligence about Early Childhood Risks in Philadelphia

    Science.gov (United States)

    LeBoeuf, Whitney A.; Barghaus, Katherine; Fantuzzo, John; Coe, Kristen; Brumley, Benjamin

    2016-01-01

    "Early childhood risks" are markers of early childhood experiences that extensive research has shown to be detrimental to later academic and behavioral outcomes. In Philadelphia, evidence indicates that seven early childhood risks tracked by public agencies have negative effects on early school outcomes. These risks include low…

  18. Systemwide Implementation of Project-Based Learning: The Philadelphia Approach

    Science.gov (United States)

    Schwalm, Jason; Tylek, Karen Smuck

    2012-01-01

    Citywide implementation of project-based learning highlights the benefits--and the challenges--of promoting exemplary practices across an entire out-of-school time (OST) network. In summer 2009, the City of Philadelphia and its intermediary, the Public Health Management Corporation (PHMC), introduced project-based learning to a network of more…

  19. Philadelphia's Renaissance Schools Initiative: 18 Month Interim Report

    Science.gov (United States)

    Gold, Eva; Norton, Michael H.; Good, Deborah; Levin, Stephanie

    2012-01-01

    This report presents Year One (2010-11) school level achievement and attendance outcomes and case study findings from fall 2011 that focused on school leadership and instruction. Thirteen schools were included in the first year of Philadelphia's Renaissance Schools Initiative (2010-11). Of these schools: (1) Four K-8 schools were…

  20. The Implementation of CRM at FISC Norfolk Detachment Philadelphia

    Science.gov (United States)

    2003-06-01

    Customer Relationship Management system. [28] If FISC decides to implement a CRM system, the decision will impact the duties of the...distribution is unlimited 12b. DISTRIBUTION CODE 13. ABSTRACT (maximum 200 words) Customer Relations Management ( CRM ) can be defined in many ways. In...Norfolk Philadelphia Mission Statement. 15. NUMBER OF PAGES 91 14. SUBJECT TERMS Customer Relations Management System, CRM ,

  1. South Philadelphia Passive Sampler and Sensor Study - Interim Report

    Science.gov (United States)

    Starting in the June 2013, the U.S. EPA and the City of Philadelphia Air Measurements Services (AMS) began a collaborative research project to investigate how sensor-based, stand-alone air measurements (SAMs) and passive samplers (PSs) can help improve information on air pollutan...

  2. South Philadelphia Passive Sampler and Sensor Study: Interim Report

    Science.gov (United States)

    Starting in June 2013, the United States Environmental Protection Agency (U.S. EPA) and the City of Philadelphia Air Measurements Services began collaborative research on the use of passive samplers (PSs) and stand-alone air measurement (SAM) systems to improve information on the...

  3. Literacy, Place, and Migration in Philadelphia among Ethnic Chinese

    Science.gov (United States)

    Rovito, Michael; Masucci, Michele

    2009-01-01

    We introduce the need for scholars interested in literacy, geography, and cultural studies to examine the role of English language literacy in shaping assimilation experiences of recent immigrant groups. We consider a case study of English language self-efficacy among ethnic Chinese immigrants in the Philadelphia metropolitan area to suggest how…

  4. Short-Form Philadelphia Naming Test: Rationale and Empirical Evaluation

    Science.gov (United States)

    Walker, Grant M.; Schwartz, Myrna F.

    2012-01-01

    Purpose: To create two matched short forms of the Philadelphia Naming Test (PNT; Roach, Schwartz, Martin, Grewal, & Brecher, 1996) that yield similar results to the PNT for measuring anomia. Method: In Study 1, archived naming data from 94 individuals with aphasia were used to identify which PNT items should be included in the short forms. The 2…

  5. EXPLORATION ENGINEERING

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>20112760 Dai Guozhong (College of Civil Engineering,Changzhou Institute of Tech- nology,Changzhou 213002,China);Zhang Yaxing Study on Solid-Free Drilling Fluid of PVM Polymer and Its Application (Geology

  6. Environmental guidelines for reuse of ash in civil engineering applications - including criteria for Sb and As; Miljoeriktlinjer foer askanvaendning i anlaeggningsbyggande - inklusive haltkriterier foer Sb och As

    Energy Technology Data Exchange (ETDEWEB)

    Bendz, David; Wik, Ola (Swedish Geotechnical Inst., Linkoeping (Sweden)); Jones, Celia; Pettersson, Michael; Elert, Mark (Kemakta, Stockholm (Sweden))

    2009-07-15

    Swedish producers, authorities and users have acknowledged the need for common environmental guidelines for residues. The objective of this project has been to develop a proposal for common environmental guidelines for reuse of ash in civil engineering applications. The project has a narrow risk assessment with application on an strictly nearfield, local perspective and focus on a limited set of substances. Health aspects for construction workers are not covered in the project. The starting point in the risk assessment is the assumption that ashes may be used just like any conventional construction material. Special requirements or regulations regarding precautionary actions in the handling of ashes, regarding the site or surroundings will be avoided. The guiding principle has been the precautionary principle: reuse of ash is acceptable only if it constitute an insignificant risk to health and environment. The calculations are based on defined emission- and exposure scenarios. The concept of insignificant risk imply that the impact in the defined points of compliance does not exceed established health- and environmental criteria. The model address health risks associated with spreading of particles and exposure by dust, oral intake, dermal contact and intake by vegetables or wild grown berries and consumption of ground water. Off-site environmental effects in surface waters and in soil as well as health- and environmental risks in the post use phase are also considered. Exposure by dust is addressed in the same way as in the Swedish Environmental Protection Agency's guidelines for contaminated soil [12]. The guidelines values for exposure by dust, oral intake, dermal contact and intake by vegetables or wild grown berrys are total content, whereas the guidelines for exposure by consumption of ground water or environmental effects in surface waters are based on leaching properties of the ash. The guidelines rely on a conceptual model, defined emissions and

  7. 基于灰色预测的建筑工程造价快速估算%The Method Based on Grey Prediction in Quick Cost Estimating of Civil Engineering

    Institute of Scientific and Technical Information of China (English)

    张建华; 王立志; 李雪秋

    2011-01-01

    以建筑工程造价快速估算为研究对象,运用灰色预测中GM(1,N)建模机理,对建筑工程造价指标进行系统分析,建立建筑工程造价、人工费、工程材料费和机械使用费的状态方程,进而构建建筑工程造价的定义型GM(1,N)预测模型与派生型GM(1,N,x,(O))预测模型,对建筑工程造价进行快速估算,最后通过实例验证灰色预测模型在建筑工程造价快速估算中的可行性,估算结果可靠.%This article takes the quick cost estimating of civil engineering as the research object. By applying the grey prediction GM(1,N)modeling mechanism, it analyzes the construction project cost indexes systematically, and sets up a state equation about construction project cost, labor cost, engineering cost of raw materials and mechanical cost. Then the defined prediction model and the derived type prediction model are set up to quickly estimate the construction engineering cost. Finally through examples, it proves that the grey forccasting model is feasibility and the estimating results are reliable in the quick cost estimating of civil engineering.

  8. The Teaching Reform of Graduation Design in Civil Engineering Based on SWOT Analysis%基于SWOT分析的土木工程专业毕业设计教学改革

    Institute of Scientific and Technical Information of China (English)

    王新政; 王立峰; 田玉梅; 孙增林

    2011-01-01

    Based on the characteristics of adult education in civil engineering specialty,this paper analyzed "University-Enterprise Cooperation" and "Double-Qualification" modes of teaching reform in graduation design through SWOT methods.The analysis results show that theory and practice,education and demand will be combined closer through establishing University-Enterprise Cooperation cultivation mechanism and hiring "Double-Qualification" teachers,thus to truly play the huge function of graduation design teaching of adult education in civil engineering specialty.%本文结合土木工程专业成人教育的自身特点,对其毕业设计教学改革中的"校企联合"以及"双师型"两大教学模式进行了SWOT分析.分析结果表明,通过制定高校与企业的联合培养机制、聘请和培养"双师型"指导教师,能够使理论与实践、教育与需求的结合更紧密,从而真正发挥毕业设计教学环节在土木工程专业成人教育中的巨大作用.

  9. 刍议节能施工技术在工民建建筑工程中的应用%Application of the Energy Saving Construction Technology in Civil Architecture Engineering

    Institute of Scientific and Technical Information of China (English)

    潘伟斌

    2014-01-01

    随着时代的发展,我国建筑事业得到了快速的发展。尤其在工民建工程中,作为新时期背景下的建筑施工企业,要想在竞争日益激烈的市场中谋求生存和发展,就必须在工民建工程建设过程中加强节能施工技术的应用,提高建筑的节能环保功效。%With the development of the times, China's constr-uction industry has been rapid developed. Especial y in the ci-vil engineering, the construction enterprises under the backgr-ound of new era, to seek survival and development in the inc-reasingly fierce market competition, must strengthen the appl-ication of energy-saving construction technology in the process of civil engineering construction, improve the efficiency of bu-ilding energy saving and environmental protection.

  10. Teaching reform of civil engineering construction course in application- oriented colleges and universities%应用型本科院校土木工程施工技术课程教学改革

    Institute of Scientific and Technical Information of China (English)

    涂劲松; 戈海玉

    2012-01-01

    Civil engineering construction technology is a very practical professional course. Combing theoretical teaching with practical teaching is important to train students' application abilities. Based on the current situation and teaching practice of civil engineering construction course teaching, we proposed suggestions on teaching methods, teaching modes and teaching means. We also introduced the production practice, technical seminars of specific engineering topics, and video and pictures of cases into classroom teaching, which stimulated students' interest in learning, improved the teaching quality, and provided a reference for innovative teaching programs.%土木工程施工技术是一门实践性很强的专业课程,该课程在整个课程体系中起着承前启后的作用,因此把理论与实践教学相结合,使学生具备应用知识的能力成为值得深思的问题。文章从目前土木工程施工技术课程教学现状出发,结合当前土木工程应用型本科院校教学改革实践,对该课程教学方法、教学模式和教学手段等提出了一些改革建议,并把生产实习实践、具体工程专题技术讲座、视频图片案例教学等手段贯穿于课堂教学,这既激发了学生学习兴趣,提高了教学质量,也为该课程的创新教学模式提供参考。

  11. Teaching Method Research of Civil Engineering Surveying Practice ---Prominent Personal Competency Development%土木工程专业测绘实习教学方法研究——突出个人能力培养

    Institute of Scientific and Technical Information of China (English)

    杨谈蜀

    2012-01-01

    测绘实习是高校土木工程专业工程测量教学的重要组成部分,是学生从学校走向生产实际的桥梁。作者在测绘实习教学中紧紧围绕土木工程生产实践,以提高每个学生独立应用能力为中心,总结出一套传统与启发教育相结合的教学方法,采取合理配备师资、科学分组、突出个人独立观测成果要求、加强日常启发辅导、强调仪器考核等措施,提高学生的实习积极性和能动性,在掌握测绘技能的同时深化理解理论知识,培养符合社会需要的应用型高级技术人才。%Surveying and Mapping internship is an important part of the College of Civil Engineering professional engin- eering survey teaching, the students from the school to the actual production of bridge. Tightly around the civil engineering production practices of practice teaching in the surveying and mapping, standalone application to improve each student-cen- tered, summed up the combination of a set of traditional and inspired education teaching methods, to take reasonable with teachers, scientific grouping, highlighting the personal independence the observation results of requirements, to strengthen daily inspiration counseling, stressed instrument assessment and other measures to improve the student's internship enthusi- asm and initiative, mastered surveying and mapping skills, while deepening the understanding of the theoretical knowledge, training of applied senior technical personnel to meet the social needs.

  12. Analysis of the present situation and future prospect of civil engineering in China%我国土木工程的现状及其未来前景分析

    Institute of Scientific and Technical Information of China (English)

    冀强

    2015-01-01

    改革开放以来,我国在很多方面都发生了翻天覆地的变化,特别是近些年来随着经济的不断推进和先进技术的不断推广,我国在土木工程事业发展方面取得了显著的成就。土木工程建设与先进技术和高素质人才的努力密切结合,在结构力学、施工技术、结构理论与实践等方面取得了很多重大的突破。在当今可持续发展、科学发展观的时代背景下,我国的高层建筑也取得了优异的成绩。本文将在分析我国目前土地工程发展现状及未来发展前景的基础上,旨在为促进我国土木工程建设进一步发展壮大的提供相关理论依据。%Since the reform and opening up,our country in many ways have taken place in the earth sha-king changes,especially in recent years with the continuous promotion of the economy and the continuous progress of advanced technology,our country in civil engineering career development made remarkable achievements.Construction of civil engineering and advanced technology and high quality personnel to work closely with the combination of structural mechanics,construction technology,structural theory and practice,and achieved a lot of maj or breakthroughs.In today’s sustainable development,scientific development view of the times background,China’s high-rise buildings have achieved excellent results.This paper will be based on the analysis of the current situation and future development prospects of the development of land proj ects in China,and to provide the relevant theoretical basis for the further development of civil engineering construction in our country.

  13. Application of Mixed-Language Programming of FORTRAN and C# in Calculating of Civil Engineering%利用混编技术对土木工程计算程序的改造

    Institute of Scientific and Technical Information of China (English)

    周涛; 汪金辉; 郭向荣

    2009-01-01

    Considering the characteristics of FORTRAN、C# language and OpenGL graphic library individually,this paper brings forward the concepts and methods of how to combining FORTRAN、C# and OpenGL together in reconstructing program when developing the interactive software of calculating of civil engineering.And this method is based on the technology of DLL (Dynamic Link Library).Through an example,in which the source code of FORTRAN was slightly transformed,this paper illustrates the process of the exploitation of the method.Examples prove this hybrid technology can greatly exert the advantages of all languages,and also make the classical source code of FORTRAN in existence refresh.In this way,not only the workload of the developing of the calculating program about civil engineering can be cut down,but also the efficiency of the Constructing the Software of civil engineering can be improved.%从FORTRAN、C#语言和OpenGL图形库各自的特点出发,提出了将三种技术通过动态链接库DLL(Dynamic Link Library)技术混合在一起,实现对传统土木工程计算程序的交互式界面化改造.并通过改造现有的GSAP(中南大学郭向荣教授开发的桥梁结构分析专用程序)计算程序FORTRAN源代码的实例阐述了这种开发方法的过程.实例证明,利用这种混合编程的技术可以充分发挥各种语言或标准的优势,使得现有的经典FORTRAN计算程序源码可以焕发出新的活力,既可以减轻土木工程计算程序的开发的工作量,又能够大大提高土木工程专业软件开发的效率.

  14. Environmental guidelines for reuse of ash in civil engineering applications - including criteria for Sb and As; Miljoeriktlinjer foer askanvaendning i anlaeggningsbyggande - inklusive haltkriterier foer Sb och As

    Energy Technology Data Exchange (ETDEWEB)

    Bendz, David; Wik, Ola (Swedish Geotechnical Inst., Linkoeping (Sweden)); Jones, Celia; Pettersson, Michael; Elert, Mark (Kemakta, Stockholm (Sweden))

    2009-07-15

    Swedish producers, authorities and users have acknowledged the need for common environmental guidelines for residues. The objective of this project has been to develop a proposal for common environmental guidelines for reuse of ash in civil engineering applications. The project has a narrow risk assessment with application on an strictly nearfield, local perspective and focus on a limited set of substances. Health aspects for construction workers are not covered in the project. The starting point in the risk assessment is the assumption that ashes may be used just like any conventional construction material. Special requirements or regulations regarding precautionary actions in the handling of ashes, regarding the site or surroundings will be avoided. The guiding principle has been the precautionary principle: reuse of ash is acceptable only if it constitute an insignificant risk to health and environment. The calculations are based on defined emission- and exposure scenarios. The concept of insignificant risk imply that the impact in the defined points of compliance does not exceed established health- and environmental criteria. The model address health risks associated with spreading of particles and exposure by dust, oral intake, dermal contact and intake by vegetables or wild grown berries and consumption of ground water. Off-site environmental effects in surface waters and in soil as well as health- and environmental risks in the post use phase are also considered. Exposure by dust is addressed in the same way as in the Swedish Environmental Protection Agency's guidelines for contaminated soil [12]. The guidelines values for exposure by dust, oral intake, dermal contact and intake by vegetables or wild grown berrys are total content, whereas the guidelines for exposure by consumption of ground water or environmental effects in surface waters are based on leaching properties of the ash. The guidelines rely on a conceptual model, defined emissions and

  15. Demonstration Assessment of LED Roadway Lighting: Philadelphia, PA

    Energy Technology Data Exchange (ETDEWEB)

    Royer, Michael P.; Tuenge, Jason R.; Poplawski, Michael E.

    2012-09-01

    For this demonstration assessment, 10 different groups of LED luminaires were installed at three sites in Philadelphia, PA. Each of the three sites represented a different set of conditions, most importantly with regard to the incumbent HPS luminaires, which were nominally 100 W, 150 W, and 250 W. The performance of each product was evaluated based on manufacturer data, illuminance calculations, field measurements of illuminance, and the subjective impressions of both regular and expert observers.

  16. Single chromosomal abnormalities in Philadelphia-negative chronic myeloproliferative disorders.

    Science.gov (United States)

    Panani, Anna D

    2007-01-01

    In Philadelphia-negative chronic myeloproliferative disorders (CMPD), increased proliferation with effective maturation of the myeloid lineage is present, while peripheral leukocytosis, thrombocytosis or elevated red blood cell mass are found. This group of disorders includes polycythemia vera (PV), essential thrombocythemia (ET) and idiopathic myelofibrosis (IMF). Furthermore, cases that cannot be clearly defined are regarded as unclassified CMPD. In Philadelphia-negative CMPD, recurrent cytogenetic abnormalities occur, but no specific abnormality has been defined to date. Chromosomal abnormalities detected in a neoplastic disease as a sole anomaly are of major importance, possibly constituting primary changes implicated in the initiation or progression of the neoplastic process. The aim of this study was to investigate the frequency and the type of single chromosomal changes in Philadelphia-negative CMPD patients. By conventional cytogenetics, 245 Philadelphia-negative CMPD cases at diagnosis were investigated for the frequency and the type of single chromosomal aberrations. Seventeen patients presented single chromosomal changes. These aberrations were, according to frequency, +8 (in 3 PV cases, 2 IMF and 2 unclassified myeloproliferative diseases), +13 in 3 cases (IMF, ET and unclassified myeloproliferative disease), monosomy 10 in 2 PV cases, monosomy 14 in one ET patient, +3, -4 and del(11)(q13) in 1 unclassified myeloproliferative disease each and monosomy 7 in 1 IMF case. It is unclear whether these abnormalities found at the time of diagnosis play a role in CMPD. However, since an isolated chromosomal abnormality may be implicated in the initiation of the neoplastic process, the documentation of more cases of CMPD with single abnormalities at the time of diagnosis would facilitate the identification of candidate genes involved in the neoplastic process.

  17. Molecular Analysis Research at Community College of Philadelphia

    Science.gov (United States)

    2015-09-21

    Molecular Analysis Research at Community College of Philadelphia Report Title AXIMA Assurance mass spectrometer, Leica DMI-8 fluorescent microscope...lab research and analysis of data, a poster presentation and seminar will be created to communicate scientific findings at The 2016 American Society ...SECURITY CLASSIFICATION OF: AXIMA Assurance mass spectrometer, Leica DMI-8 fluorescent microscope and BioRad V3 Western Workflow were purchased

  18. 虱际土木工程专业结构动力学课程本科教学比较研究%Comparative Study on International Civil Engineering Professional Structural Dynamics Courses Undergraduate Teaching

    Institute of Scientific and Technical Information of China (English)

    孙智

    2012-01-01

    This paper investigates 6 international famous universities undergraduate program for specialty in civil en- gineering "structural dynamics" teaching plan, and compared the "structural dynamic" course requirements, teaching content, teaching methods, assessment methods, teaching information, through the comparative study on China's civil engineering "structural dynamics" curriculum for undergraduate teaching and course construction to provide some meaningful suggestions.%本文调研了6所国际著名高校土木工程专业本科培养计划和结构动力学相关课程教学计划,并比较了结构动力学课程的修课要求、教学内容、教学方式、考核方法、教学资料等内容,通过比较研究对我国土木工程专业结构动力学课程的本科教学与课程建设提供了若干有意义的建议。

  19. Research on application of the 3D technology and 3D model in English for civil engineering%3D技术与三维建模在建筑类ECE教学实践中的应用

    Institute of Scientific and Technical Information of China (English)

    罗雨

    2014-01-01

    目前,最新信息技术的3D技术与三维建模已应用在课堂与实践辅助教学中.文章探讨了最新的信息技术与现有教学资源的选择、整合途径与原则,并以建筑英语课程教学与实践(English for Civil Engineer,ECE)为例,探索基于3D技术与三维建模的新教学模式.研究发现,新教学模式在有效教学、知识体系建构、技能与语言迁移、创新思维培养等方面有显著成效.

  20. 关于培养高职土建类优秀拔尖人才的思考%Thinking about Cultivation of the Excellent Topnotch Talent Among High-professional Civil Engineering Students

    Institute of Scientific and Technical Information of China (English)

    陈红秋

    2012-01-01

    The existing base has been analyzed about cultivation of the excellent topnotch talent among high-professional civil engineering students.Five fundamental characteristics of topnotch talent have been proposed.Train of thought about cultivation of the excellent topnotch talent has been worked out that focused on education manager design,cultivation model and soon on.%文章分析了泰州职业技术学院高职土建类优秀拔尖人才培养的现有基础,提出了高职土建类优秀拔尖人才的五个基本特征,围绕顶层设计、培养模式等提出了高职土建类优秀拔尖人才的培养思路。

  1. Reforma studija geodezije na Odsjeku za geodeziju Građevinskog fakulteta Univerziteta u Sarajevu : Reform of the study of geodesy at the Department of geodesy of Faculty of Civil Engineering, University of Sarajevo

    Directory of Open Access Journals (Sweden)

    Džanina Omićević

    2011-12-01

    Full Text Available U ovom radu prikazane su aktivnosti i ciljevi vezani uz implementaciju Bolonjskog procesa na Odsjeku za geodeziju Građevinskog fakulteta Univerziteta u Sarajevu. Prvi puta su predstavljeni novi programi studija geodezije organizovana u tri ciklusa: dodiplomski, diplomski i doktorski studij. Cilj je da sažeto iznesemo osnovne informacije o reformskom procesu, koji je u toku, a koji bi trebalo da dugoročno promijeni evropski visokoškolski sistem. : This paper presents activities and goals related with the implementation of the Bologna process at the Department of Geodesy of Civil Engineering, University of Sarajevo. For the first time, new curricula study of geodesy which are organized into three cycles: bachelor, master and postgraduete doctoral study are presented. The goal of this paper is to present basic informacion about ongoing reform proces, and that should change the long-term European university system.

  2. Geophylosophy of circumpolar civilization

    Directory of Open Access Journals (Sweden)

    I. A. Zhuvaka

    2014-09-01

    Under the influence of colonization occurred the interpenetration of civilizations, indigenous peoples have largely lose its image, the traditional way of life and culture. Arctic civilization has appeared in a crisis and facing the threat of extinction.

  3. Effective control of engineering cost measures

    Institute of Scientific and Technical Information of China (English)

    郑虹; 戚悦

    2013-01-01

    the civil engineering cost function mainly lies in the calculation of the required for the construction cost to the sum of al. Civil engineering cost throughout the project, the efective use of human, financial weakness, can beter benefit our investment, so the control of civil engineering cost measures is very necessary.

  4. In Pursuit Of Personal Conviction: Upon The Civil War Pocket Diaries Of Emilie Frances Davis, A Freeborn Black Woman [A Short Communication

    Directory of Open Access Journals (Sweden)

    Angela K. Brown

    2013-07-01

    Full Text Available Emilie Davis was an African-American woman living in Philadelphia during the U.S. Civil War. Emile's diaries are a transcription of Emilie’s three pocket diaries for the years 1863, 1864, and 1865. In them, she recounts black Philadelphians’ celebration of the Emancipation Proclamation, nervous excitement during the battle of Gettysburg, and their collective mourning of President Lincoln. The diary allows readers to experience the war in real time, as events unfolded for Civil War Americans.

  5. Det civile samfund

    DEFF Research Database (Denmark)

    Henriksen, Lars Skov

    2014-01-01

    Kapitlet giver en oversigt over de vigtigste teoretiske forståelser af begrebet om det civile samfund. Desuden giver kapitlet en empirisk oversigt over foreninger og organisationer i det danske civilsamfund samt befolkningens civile engagement.......Kapitlet giver en oversigt over de vigtigste teoretiske forståelser af begrebet om det civile samfund. Desuden giver kapitlet en empirisk oversigt over foreninger og organisationer i det danske civilsamfund samt befolkningens civile engagement....

  6. Compression Ignition Engines - revolutionary technology that has civilized frontiers all over the globe from the Industrial Revolution into the 21st Century

    Directory of Open Access Journals (Sweden)

    Stephen Anthony Ciatti

    2015-06-01

    Full Text Available The history, present and future of the compression ignition engine is a fascinating story that spans over 100 years, from the time of Rudolf Diesel to the highly regulated and computerized engines of the 21st Century. The development of these engines provided inexpensive, reliable and high power density machines to allow transportation, construction and farming to be more productive with less human effort than in any previous period of human history. The concept that fuels could be consumed efficiently and effectively with only the ignition of pressurized and heated air was a significant departure from the previous coal-burning architecture of the 1800s. Today, the compression ignition engine is undergoing yet another revolution. The equipment that provides transport, builds roads and infrastructure, and harvests the food we eat needs to meet more stringent requirements than ever before. How successfully 21st Century engineers are able to make compression ignition engine technology meet these demands will be of major influence in assisting developing nations (with over 50% of the world’s population achieve the economic and environmental goals they seek.

  7. Citizenship in civil society?

    NARCIS (Netherlands)

    Ossewaarde, Marinus R.R.

    2007-01-01

    This article seeks to provide a conceptual framework to complement and guide the empirical analysis of civil society. The core argument is that civil society must be understood, not as a category of (post)industrialized society, but as one of individualized society. Civil society is characterized by

  8. Autoignition Chemistry of Surrogate Fuel Components in an Engine Environment

    Science.gov (United States)

    2015-08-21

    Environment David L. Miller and Nicholas P. Cernansky Mechanical Engineering and Mechanics Drexel University, Philadelphia, Pennsylvania, 19104... Engineering and Mechanics Department at Drexel University, and utilized an existing single cylinder research engine facility. The facility...a single-cylinder, variable compression ratio research engine . The program objectives were to determine the branching pathways of JP-8 components at

  9. Global Journal of Engineering Research

    African Journals Online (AJOL)

    The Global Journal of Engineering Research is aimed at promoting research in all areas of Engineering Research including Mechanical, Civil, Electrical, Chemical, ... Teaching and learning methodologies in engineering education in Nigerian ...

  10. Construction and practice of cultivation system for the compound innovative talents of civil engineering specialty%土木工程专业复合型创新人才培养体系的构建与实践

    Institute of Scientific and Technical Information of China (English)

    徐礼华; 傅旭东; 彭华; 杜新喜; 傅少君; 邹勇; 安旭文

    2016-01-01

    In order to meet the demand for innovative talents in establishing innovation-oriented country, we gave full advantage of comprehensive university by the effective cross between liberal arts and engineering, the equal attention on general and professional education, the practice on major and minor or double-degree system and international education, expecting the success cultivation of compound innovative talents of civil engineering. To achieve this goal, we proposed the concept of civil engineering innovative talents cultivation which contains 28 elements in four dimensions covering the knowledge structure, practical skills, ability structure and comprehensive quality. In addition, we established the talents training system that emphasized on curriculum, practice teaching, college student career planning education and teaching quality assurance with the support by the university and enterprise collaborative innovation platform. Moreover, we established the perfect operating rules for this training system. After the practice for 8 years, we achieved remarkable success. Our students had broad knowledge, high comprehensive quality, excellent innovative and practical ability as well as high-quality employment.%为适应建设创新型国家对创新人才的需求,武汉大学充分发挥综合性大学的优势,实行文工交叉,坚持通识教育与专业教育并重,实行主辅修、双学位、国际化办学,培养土木工程专业复合型创新人才。文章提出了涵盖“知识结构、实践技能、能力结构、综合素质”4维度28要素的“土木工程复合型创新人才培养理念”,构建了以“课程体系、实践教学体系、大学生全程职业规划教育体系、教学质量保障体系”为主体,以“校企协同创新实践平台”为依托的培养体系,建立了健全的培养体系运行机制。经过八年的实践,取得了显著的成效,培养的学生知识面宽,综合素质好,创

  11. Inspector General, DOD, Oversight of the Army Audit Agency Audit of the FY 1998 Financial Statements of the U.S. Army Corps of Engineers, Civil Works Program

    Science.gov (United States)

    2007-11-02

    Latest Acquisition Cost NRV = Net Realizable Value SP = Standard Price 0= Other AC Actual Cost FY 98 Financial Statements, U S Army Corps of Engineers (AA...Not applicable Legend: Valuation Methods LAC = Latest Acquisition Cost NRV = Net Realizable Value SP Standard Price 0 = Other AC = Actual Cost NOTE 8C

  12. Uncovering Clinical Features of De Novo Philadelphia Positive Myelodysplasia

    Directory of Open Access Journals (Sweden)

    Aristides Armas

    2017-01-01

    Full Text Available Myelodysplastic syndrome (MDS is cytogenetically heterogeneous and retains variable risk for acute myeloid leukemia transformation. Though not yet fully understood, there is an association between genetic abnormalities and defects in gene expression. The functional role for infrequent cytogenetic alteration remains unclear. An uncommon chromosomic abnormality is the presence of the Philadelphia (Ph chromosome. Here, we report a patient with Ph+ MDS treated with low dose Dasatinib who achieved hematologic response for 7 months. In addition, we also examined the English literature on all de novo Ph + MDS cases between 1996 and 2015 to gain insight into clinical features and outcome.

  13. Uncovering Clinical Features of De Novo Philadelphia Positive Myelodysplasia

    Science.gov (United States)

    Armas, Aristides; Chen, Chen; Mims, Martha

    2017-01-01

    Myelodysplastic syndrome (MDS) is cytogenetically heterogeneous and retains variable risk for acute myeloid leukemia transformation. Though not yet fully understood, there is an association between genetic abnormalities and defects in gene expression. The functional role for infrequent cytogenetic alteration remains unclear. An uncommon chromosomic abnormality is the presence of the Philadelphia (Ph) chromosome. Here, we report a patient with Ph+ MDS treated with low dose Dasatinib who achieved hematologic response for 7 months. In addition, we also examined the English literature on all de novo Ph + MDS cases between 1996 and 2015 to gain insight into clinical features and outcome. PMID:28321349

  14. Abstracts of the Canadian Society for Civil Engineering annual conference including the general conference, the 1. international structural specialty conference, the 1. international construction specialty conference, and the 1. specialty conference on disaster mitigation : towards a sustainable future[General Conference

    Energy Technology Data Exchange (ETDEWEB)

    El-Badry, M.; Loov, R.E.; Ruwanpura, J.; El-Hacha, R. [Calgary Univ., AB (Canada); Kroman, J. [City of Calgary, AB (Canada); Rankin, J. [New Brunswick Univ., Fredericton, NB (Canada). Dept. of Civil Engineering; Dunaszegi, L. [Earth Tech Canada Inc., Calgary, AB (Canada)] (eds.)

    2006-07-01

    This conference provided a forum for national and international practicing engineers, researchers and technical experts to discuss sustainable solutions to infrastructure development. Discussions focused on recent developments in new technologies for building more economic and sustainable infrastructure, while improving the safety of buildings, bridges, roads, water supply and sewage treatment systems. The conference was held in conjunction with associated specialty conferences, including a first international structures specialty conference, a first international construction specialty conference, and a first specialty conference on disaster mitigation. This book of abstracts highlights all the specialty conferences and accompanies a CD-ROM that has the full text of all the papers. Manuscripts of the full papers submitted to the specialty conferences were peer-reviewed by international scientific committees. The general conference provided a forum to learn about new technologies and future directions in various areas of civil engineering. It included a special theme session on sustainable development and a special session on innovation and information technology. Other technical sessions focused on topics such as civil engineering history and education; infrastructure management and renewal; asset management; risk assessment and management; engineering materials and mechanics; environmental engineering and science; hydrotechnical engineering; cold region engineering; and, transportation engineering. The general conference featured 88 presentations, of which 15 have been catalogued separately for inclusion in this database.

  15. Philadelphia (1993: las claves de un icono cultural

    Directory of Open Access Journals (Sweden)

    José Aijón Oliva

    2008-10-01

    Full Text Available Philadelphia responde a la razón fundamental del cine comercial de los últimos tiempos: darle al público aquello que quiere ver. A medida que van surgiendo los problemas en la sociedad, el cine se interesa por ellos y realiza películas centradas en ese tema. A principios de los años 90 la alarma social ante el virus del SIDA era tan importante que surgieron muchas películas que trataban este tema. Philadelphia es la más popular de todas ellas y la más accesible (y probablemente la de mayor calidad cinematográfica, aunque su planteamiento es bastante engañoso: no es tanto una película sobre el SIDA como del rechazo al colectivo homosexual. No obstante, desmitifica algunos aspectos del SIDA y da algunas respuestas que se pueden considerar pedagógicas.             Un gran director, un reparto muy acertado, un guión (de estructura clásica de categoría, una música muy bien seleccionada y unos juegos de luces y cámara muy cuidados son los ingredientes que convierten a esta película en uno de los iconos de la cultura popular de los 90.

  16. Urban ecosystem services and decision making for a green Philadelphia

    Science.gov (United States)

    Hogan, Dianna M.; Shapiro, Carl D.; Karp, David N.; Wachter, Susan M.

    2014-01-01

    Traditional approaches to urban development often do not account for, or recognize, the role of ecosystem services and the benefits these services provide to the health and well-being of city residents. Without such accounting, urban ecosystem services are likely to be degraded over time, with negative consequences for the sustainability of cities and the well-being of their residents (Millennium Ecosystem Assessment, 2005; Hirsch, 2008). On May 23, 2013, the Spatial Integration Laboratory for Urban Systems (SILUS), a collaboration between the U.S. Geological Survey (USGS) Science and Decisions Center and the Wharton GIS Lab, convened a one-day symposium—Urban Ecosystem Services and Decision Making: A Green Philadelphia—at the University of Pennsylvania in Philadelphia, Pennsylvania, to examine the role of green infrastructure in the environmental, economic, and social well-being of cities. Cosponsored by the USGS and the Penn Institute for Urban Research (Penn IUR), the symposium brought together policymakers, practitioners, and researchers from a range of disciplines to advance a research agenda on the use of science in public decision making to inform investment in green infrastructure and ecosystem services in urban areas. The city of Philadelphia has recently implemented a program designed to sustain urban ecosystem services and advance the use of green infrastructure. In 2009, the Philadelphia Mayor’s Office of Sustainability launched its Greenworks plan, establishing a citywide sustainability strategy. Major contributions towards its goals are being implemented in coordination with the Philadelphia Water Department (PWD). The Green City, Clean Waters initiative, the city’s nationally recognized stormwater management plan, was signed into action with the U.S. Environmental Protection Agency (EPA) in April 2012. The plan outlines a 25-year strategy to use green infrastructure to protect and improve the city’s watershed. Widespread support for the

  17. Urban ecosystem services and decision making for a green Philadelphia

    Science.gov (United States)

    Hogan, Dianna M.; Shapiro, Carl D.; Karp, David N.; Wachter, Susan M.

    2014-01-01

    Traditional approaches to urban development often do not account for, or recognize, the role of ecosystem services and the benefits these services provide to the health and well-being of city residents. Without such accounting, urban ecosystem services are likely to be degraded over time, with negative consequences for the sustainability of cities and the well-being of their residents (Millennium Ecosystem Assessment, 2005; Hirsch, 2008). On May 23, 2013, the Spatial Integration Laboratory for Urban Systems (SILUS), a collaboration between the U.S. Geological Survey (USGS) Science and Decisions Center and the Wharton GIS Lab, convened a one-day symposium—Urban Ecosystem Services and Decision Making: A Green Philadelphia—at the University of Pennsylvania in Philadelphia, Pennsylvania, to examine the role of green infrastructure in the environmental, economic, and social well-being of cities. Cosponsored by the USGS and the Penn Institute for Urban Research (Penn IUR), the symposium brought together policymakers, practitioners, and researchers from a range of disciplines to advance a research agenda on the use of science in public decision making to inform investment in green infrastructure and ecosystem services in urban areas. The city of Philadelphia has recently implemented a program designed to sustain urban ecosystem services and advance the use of green infrastructure. In 2009, the Philadelphia Mayor’s Office of Sustainability launched its Greenworks plan, establishing a citywide sustainability strategy. Major contributions towards its goals are being implemented in coordination with the Philadelphia Water Department (PWD). The Green City, Clean Waters initiative, the city’s nationally recognized stormwater management plan, was signed into action with the U.S. Environmental Protection Agency (EPA) in April 2012. The plan outlines a 25-year strategy to use green infrastructure to protect and improve the city’s watershed. Widespread support for the

  18. Restructuring Philadelphia's Neighborhood High Schools: A Conversation with Constance Clayton and Michelle Fine.

    Science.gov (United States)

    Schwartz, Robert

    1994-01-01

    This interview with Constance Clayton, superintendent of the Philadelphia (Pennsylvania) public schools, and Michelle Fine, professor of psychology and consultant, discusses the Philadelphia Schools Collaborative, a nonprofit organization established to lead the restructuring of the city's high schools. Central to the effort is the concept of…

  19. Physiological and Antigenic Characteristics of Virulent and Attenuated Strains of Legionella pneumophila (Philadelphia 3)

    Science.gov (United States)

    1981-07-01

    CHARACTERISTICS OF I, VIRULENT AND ATTENUATED5TRAINS OF LEGIONELLA Interim PNEUMOPHILA (PHILADELPHIA 3) 6 . PERFORMING ORG. REPORT NUMBER 70 AUTHOR(*) B...number) Several methods were used to cJvrtcterize selected virulent and attenuated strains of Legionella pneumophila serogroup 1. The cultural...Antigenic Characteristics of Virulent and Attenuated Strains of Legionella pneumophila (Philadelphia 3) JOSEPH D. RISTROPH, KENNETH W. HEDLUND, AND

  20. WWC Review of the Report "Philadelphia's Renaissance Schools Initiative: 18 Month Interim Report"

    Science.gov (United States)

    What Works Clearinghouse, 2012

    2012-01-01

    The study reviewed in this report examined the effects of Philadelphia's "Renaissance Schools Initiative" on students in K-8 schools after one year of implementation. Schools were selected for participation based on their School Performance Index (SPI) at the start of the 2010-11 school year. The SPI rates every school in Philadelphia from one to…

  1. Philadelphia's Renaissance Schools: A Report on Start up and Early Implementation

    Science.gov (United States)

    Gold, Eva; Good, Deborah; Robertson-Kraft, Claire; Callahan, M. Kate

    2011-01-01

    In April 2009, Superintendent Arlene Ackerman announced her reform plan for the School District of Philadelphia (the District)--"Imagine 2014". Among other major initiatives, "Imagine 2014" laid the groundwork for Philadelphia's Renaissance Schools Initiative. The Renaissance Initiative, set to enter its second year in 2011-12, is an effort to…

  2. Civil Society and Governance

    DEFF Research Database (Denmark)

    Hulgård, Lars

    An illustration of how important the relationship is between civil society anbd governance. A short historic journey with four snapshots of times and situations that have provided interesting evidence about the connection between civil society and governance. My goal for the short historic journey...... is to make clear and hopefully even verify that providing knowledge about the impact of civil society and citizens’ participation on governance is one of the most urgent research tasks in the current period of time....

  3. Civil Society and Governance

    DEFF Research Database (Denmark)

    Hulgård, Lars

    An illustration of how important the relationship is between civil society anbd governance. A short historic journey with four snapshots of times and situations that have provided interesting evidence about the connection between civil society and governance. My goal for the short historic journey...... is to make clear and hopefully even verify that providing knowledge about the impact of civil society and citizens’ participation on governance is one of the most urgent research tasks in the current period of time....

  4. Legalisation of Civil Wars

    DEFF Research Database (Denmark)

    Buhl, Kenneth Øhlenschlæger

    2009-01-01

    -international armed conflict' is used here. Civil wars are usually limited to the territory of a state. Considering that international law is generally concerned with the legal relations between states – being a legal system based on the system of states with states as its subjects – the main question is how civil......This article is concerned with the legal challenges of regulating civil wars in international humanitarian law. Civil war is not a term used in international law; it falls however, withing the context of the legal term 'armed conflicts not of an international character', although the shorter 'non...... wars as internal conflicts have become subject to international humanitarian law....

  5. Reconceptualizing Civil Regulation

    DEFF Research Database (Denmark)

    Galang, Roberto Martin; Castello, Itziar

    2011-01-01

    This article re-conceptualizes the notion of civil regulation, through an analysis of 775 projects by firms located in 21 Asian countries, wherein we map the state of civil regulation initiatives in the region. We challenge two established assumptions in the Corporate Social Responsibility...... literature. First, contrary to what is commonly argued, we claim that strong states in Asia promote civil regulation in what we call the “paradox of the weak state”. Second, we not only argue that civil regulation is mainly enforced by multinational enterprises willing to promote international social...

  6. Problem-Based Project-Oriented Learning: Educating and evaluating for new disciplines emerging in the interplay between the professions of civil engineering and architecture

    DEFF Research Database (Denmark)

    Mullins, Michael

    2006-01-01

    styles, which raises the question of how to assess the individual student’s learning where widely different strategies with widely differing results are employed. While offering many interesting possibilities, the integration of these historically separated disciplines embraces paradoxes......, and uses PBL and project-oriented models for its educational form. There is a distinct difference between engineering and architecture in their evolutionary backgrounds and their varying degree of emphasis on natural science. Both present different forms of problem solving that appeal to different learning...... and contradictions reflected in the differences inherent in two pedagogical models used by the university, problem-based learning and project-oriented learning. However, in order for this to be adequately demonstrated, suitable forms of evaluation are necessary. A case is made for the review of assessment criteria...

  7. Civil Procedure In Denmark

    DEFF Research Database (Denmark)

    Werlauff, Erik

    The book contains an up-to-date survey of Danish civil procedure after the profound Danish procedural reforms in 2007. It deals with questions concerning competence and function of Danish courts, commencement and preparation of civil cases, questions of evidence and burden of proof, international...

  8. Apps for Ancient Civilizations

    Science.gov (United States)

    Thompson, Stephanie

    2011-01-01

    This project incorporates technology and a historical emphasis on science drawn from ancient civilizations to promote a greater understanding of conceptual science. In the Apps for Ancient Civilizations project, students investigate an ancient culture to discover how people might have used science and math smartphone apps to make their lives…

  9. Refractions of Civil Society

    DEFF Research Database (Denmark)

    Kuzmanovic, Daniella

    The thesis investigates various perceptions of civil society among civic activists in Turkey, and how these perceptions are produced and shaped. The thesis is an anthropological contribution to studies of civil society in general, as well as to studies on political culture in Turkey....

  10. From ``wiggly structures'' to ``unshaky towers'': problem framing, solution finding, and negotiation of courses of actions during a civil engineering unit for elementary students

    Science.gov (United States)

    Roth, Wolff-Michael

    1995-12-01

    The present study was designed to investigate problem- and solution-related activity of elementary students in ill-defined and open-ended settings. One Grade 4/5 class of 28 students engaged in the activities of the “Engineering for Children: Structures” curriculum, designed as a vehicle for introducing science concepts, providing ill-defined problem solving contexts, and fostering positive attitudes towards science and technology. Data included video recordings, ethnographic field notes, student produced artefacts (projects and engineering logbooks), and interviews with teachers and observers. These data supported the notion of problems, solutions, and courses of actions as entities with flexible ontologies. In the course of their negotiations, students demonstrated an uncanny competence to frame and reframe problems and solutions and to decide courses of actions of different complexities in spite of the ambiguous nature of (arte)facts, plans, and language. A case study approach was chosen as the literary device to report these general findings. The discussion focuses on the inevitably ambiguous nature of (arte)facts, plans, and language and the associated notion of “interpretive flexibility.” Suggestions are provided for teachers on how to deal with interpretive flexibility without seeking recourse to the didactic approaches of direct teaching. But what happens when problems and solutions are negotiable, when there are no longer isolated problems which one tries to solve but problems which maintain complex linkages with ensembles of other problems and diverse constraints, or when problems and solutions are simultaneously invented? (Lestel, 1989, p. 692, my translation)

  11. Research of Data Management in the Development Phase of Civil Aircraft Based on System Engineering%基于系统工程的民用飞机研制阶段数据管理研究

    Institute of Scientific and Technical Information of China (English)

    刘冰

    2016-01-01

    Through analysis of major work content at the various stages of airplane development process,combined of system engineering methods to analyze the producing process,relevance and use of data,defined the main goal of civil aircraft data management,presented the ideal of data inventory planning and the key elements of data management programs,and gave recommendations of data management software evaluation.%通过对飞机研制各阶段主要工作内容的分析,结合系统工程方法对数据的产生、数据的关联性以及数据用途进行研究,进而确定民用飞机数据管理的主要目标,提出数据清单规划的工作思路,定义数据管理计划的关键要素,并对数据管理软件的评估给出建议。

  12. Research on the evaluation system of innovation and entrepreneurship of civil engineering in local colleges%地方高校土木工程专业创新创业评价体系研究

    Institute of Scientific and Technical Information of China (English)

    方光秀

    2016-01-01

    以延边大学土木工程专业为例,介绍了基于产学研的评价体系构成要素,并通过层次分析法,确定了指标权重,构建了创新创业评价体系,提出了地方高校在创新创业评价体系中须强化的内容及完善创新创业评价政策保障的建议。%By the case of Yanbian University civil engineering,this paper describes evaluation system components,based on produce,study and research. And this paper put forward analytic hierarchy process and the evaluation system of innovation and entrepreneurship. Meanwhile,we recommend that local colleges and universities must strengthen contents in the evaluation system of innovation and entrepreneurship,and complete indemnification in policy of evaluation of innovation and entrepreneurship.

  13. Application of Simulation Technology in Higher Vocational Civil Engineering Construction Technology Teaching%仿真技术在高职土木工程施工技术课程教学中的应用探索

    Institute of Scientific and Technical Information of China (English)

    朱显鸽

    2014-01-01

    土木工程施工技术是安全技术管理专业的核心专业课程,由于本课程内容丰富、量大面广,与实践紧密结合,而学生又缺乏对实物的认识与想象,故传统的以教材为主的教学方法已经不适应,经过十多年的施工技术课程教学方法探索与实践后发现应用仿真技术可以有效地解决以往施工技术学习中的弊端。%Civil Engineering Construction Technology is the core course of security technology management professional courses, as the course content is rich, wide range of large, closely integrated with practice, and students lack of real under-standing and imagination, traditional textbook-based teaching methods are not suited, after ten years of teaching techniques and construction methods exploration, the practical application of simulation techniques can be found to effectively solve the problems of construction technology learning disadvantages.

  14. 微动勘测技术在土木工程领域的应用分析%Application analysis of micro-tremor technology in civil engineering field

    Institute of Scientific and Technical Information of China (English)

    孟爱青

    2016-01-01

    The thesis introduces the forming and development history of micro-tremor technology. According to micro-tremor survey principle, starting from aspects of display design and observation, F-K method and auto-correlation method, it describes the application of micro-tremor sur-vey technology in civil engineering, and points out its advantages, such as high survey accuracy, simple equipment and low cost and so on.%介绍了微动勘探技术的形成和发展历程,根据微动勘探的原理,从陈列设计与观测、F—K法、自相关法等方面,阐述了微动勘测技术在土木工程中的应用,指出微动勘探方法具有勘测精度高、所需设备简单、造价低等优点.

  15. Application of FBG sensor in civil engineering detection%光纤光栅传感器应用于土木工程检测的实验研究

    Institute of Scientific and Technical Information of China (English)

    覃银辉; 刘文吉; 蒋华; 刘付华

    2011-01-01

    在两个钢梁-混凝土墙节点中的同一位置分别设置光纤光栅传感器与应变片,通过对比光纤光栅传感器与应变片显示的应变结果,对整个试件的受力过程进行测量和分析.结果表明:光纤光栅传感器比应变片的效果更好,测得的数据更准确,从而证明了光纤光栅传感器在土木工程检测应用中的可行性.%FBG sensors and strain gauges were set respectively at the same location between two rigid conjunction nodes of steel beam and concrete walL The strain values of the test specimen were measured through the sensors and gauges. The force process of the entire specimen was analyzed. The FBG sensors has better measuring effect than strain gauges, and the measured data are more accurate, thus proving the feasibility of FBG sensors for civil engineering detectioa

  16. EUROPEIZAREA DREPTULUI PROCESUAL CIVIL

    Directory of Open Access Journals (Sweden)

    Alexandrina Zaharia

    2006-05-01

    Full Text Available The European Union increases the judiciary cooperation in civil and comercial cases with trans-border incidence, based on the principle of mutual recognition of judiciary rulings. The aim of adopting frame-legislation is to ensure the developement of civil procedures. The Council Regulations no. 44/2001 on the competence, the recognition and the enforcement of judiciary rulings in civil and commercial cases is a “real” Code of civil procedure in this matter, to be applied in the member states, thus ensuring the free circulation of the judiciary rulings according to the principles of mutual recognition, mutual trust and reinforcement of juridical security in the union. The community civil procedural code prevails over the national procedural code. The Regulations ensure the administration of the community justice and through their rules avoid the pronunciation, in the member states, of rulings that are irreconcilable with each other, the direct beneficiaries being legal and natural persons.

  17. Cytogenetics in solid tumors: lessons from the Philadelphia Chromosome.

    Science.gov (United States)

    Sudoyo, Aru W; Hardi, Fransiska

    2011-01-01

    Although presently known as an environmentally-related disease and appears mostly sporadic, cancer is regarded as a genetic disease based on the presence of gene mutation as a consistent factor. The "Philadelphia Chromosome" found consistently among chronic myeloid leukemia (CML) patients was the first significant finding of a chromosomal abnormality specifically related to a particular disease. Starting from this point, cytogenetics as the study of chromosomes has become a valuable tool in the assessment of cancer - as an aid in diagnosis, thus guiding therapy, and as a prognostic marker. As is the nature of the proliferating marrow, chromosomal abnormalities were found mostly in hematologic malignancies, and the findings more pathognomonic. The situation is different in solid tumors, which when visible to the naked eye already will have complex chromosomal changes and thus pose technical difficulties to the cytogeneticist. However, scientists believe that the shift in chromosomal studies from conventional cytogenetics to molecular cytogenetics will provide further information regarding solid tumors.

  18. Treatment of Philadelphia chromosome-positive acute lymphoblastic leukemia.

    Science.gov (United States)

    Ottmann, Oliver G; Wassmann, Barbara

    2005-01-01

    Philadelphia chromosome positive (Ph(+)) acute lymphoblastic leukemia (ALL) includes at least one-quarter of all adults with ALL. Until recently, conventional chemotherapy programs that have been effective in other precursor B-cell ALL cases have been unable to cure patients with this diagnosis. Allogeneic stem cell transplantation early in first remission has been the recommended therapy. The availability of imatinib mesylate and other tyrosine kinase inhibitors and small molecules that affect the BCR/ABL signaling pathways may be changing the treatment paradigm and the prognosis for these patients. The results from clinical trials using imatinib in the frontline setting and in relapsed patients as well as preliminary experience treating imatinib-resistant Ph(+) ALL will be described.

  19. Learning From Philadelphia: Topographies of HIV/AIDS Media Assemblages.

    Science.gov (United States)

    Cartwright, Lisa

    2016-01-01

    For this contribution to the special issue on "Mapping Queer Bioethics," the author employs an array of public health and popular media texts (especially Jonathan Demme's film Philadelphia) to challenge the construction and reconstruction of HIV-positive bodies as sites of bioethical concern. In outlining notions of "digital restoration," the author argues that there has been of late a remapping of the first decade of the HIV/AIDS pandemic through media projects assembled from archived materials. Accordingly, the author suggests that in the first decades of the 2000s, we have witnessed a media-archaeological turn, whereby old materials have been reassembled for commemorative purposes that oftentimes perform a reshaping of the topography of the first decade of the AIDS pandemic.

  20. 土木工程专业预算课程设计的教学现状与改进措施——以沈阳建筑大学为例%The Current Teaching Situations and Improving Measures of Civil Engineering Project Budget Task Design --Take Shenyang Jianzhu University as an Example

    Institute of Scientific and Technical Information of China (English)

    刘莉; 贾世龙; 许伟

    2012-01-01

    In combination with the features of civil engineering major curriculum design and employment of the graduates in this major, this article provides a synthetical analysis of the current situations and existing problems of the course "Civil Engineer/ug Project Budget Task Design". To solve the practica/problems existing in the course "Civil Engineering Project Budget Task Design", this article puts forward improving measures in the aspects of course design, teaching methods, internship session and computerization.%结合土木工程专业课程设置及学生就业特点,综合分析了土木工程预算课程设计现状及存在的问题。针对目前预算课程设计存在的实际问题,就课程设置、教学方法、实践环节及推行电算化方面提出了具体的改进措施。

  1. Wind tunnel test for turbo-fan engine re-ingestion characteristic of civil aircraft%民机涡扇发动机重吸入特性风洞试验

    Institute of Scientific and Technical Information of China (English)

    李达新; 赵克良; 王奇志; 盛鸣剑; 黄勇; 张美红

    2012-01-01

    民机在滑跑减速阶段一般会使用发动机的反向推力来提高其减速性能和滑跑安全性,当滑跑速度较低时使用该装置,从发动机排出的向前方喷射的气流存在被发动机重新吸入的可能,该喷流受发动机风扇的压缩做功,喷流的温度比环境温度高,如果此气流被发动机重新吸入,将会导致发动机进气气流的温度畸变,而该畸变将会引起发动机风扇叶片的颤振,影响发动机的寿命和安全性.故对于一个使用涡扇发动机的新型飞机,有必要通过风洞试验来得到其在各工况下的重吸入特性,并且根据其重吸入特性,设定截止使用反推力的滑跑速度.本文主要论述通过风洞试验获得发动机重吸入特性,并且确定反推力使用截止滑跑速度的方法.%For civil aircraft it is common method to use thrust reverser to improve the deceleration and the safety during landing run. However, if the ground running speed of the aircraft is too low, the forward moving plume flow can be re-ingested by the engine. The temperature of the plume flow is much higher than ambient temperature since it gains energy from fan compressor. As a result the re-ingestion may lead to the temperature distortion for inlet flow causing the flutter of the fan blade, thus harming the engine life and safety. Therefore, for a new turbo-fan aircraft it is necessary to obtain the re-ingestion characteristic of the engine through wind tunnel test in order to determine the turn-off speed limit for thrust reverser. This paper mainly states the method to get the A/C's re-ingestion characteristics from the wind tunnel test and acquire the thrust reverser cut-off taxiing speeds.

  2. Climates, Landscapes, and Civilizations

    Science.gov (United States)

    Schultz, Colin

    2013-10-01

    Humans are now the dominant driver of global climate change. From ocean acidification to sea level rise, changes in precipitation patterns, and rising temperatures, global warming is presenting us with an uncertain future. However, this is not the first time human civilizations have faced a changing world. In the AGU monograph Climates, Landscapes, and Civilizations, editors Liviu Giosan, Dorian Q. Fuller, Kathleen Nicoll, Rowan K. Flad, and Peter C. Clift explore how some ancient peoples weathered the shifting storms while some faded away. In this interview, Eos speaks with Liviu Giosan about the decay of civilizations, ancient adaptation, and the surprisingly long history of humanity's effect on the Earth.

  3. Civil War and Inoperativity

    DEFF Research Database (Denmark)

    Flohr, Mikkel

    2017-01-01

    This article analyses the penultimate publication in Giorgio Agambens Homo Sacer-series Stasis: Civil War as a Political Paradigm. It compares and contrasts the paradigm of civil war with the preceding paradigm of the exception, and identifies a significant displacement in the relationship between...... of inoperativity towards a concept of destituent power drawing on his other writings. It makes the argument for thinking civil war and inoperativity – stasis and stasis – together to derive a concept of destituent power as a form of revolution against the sovereign state, which does not constitute a new sovereign...

  4. Producing Civil Society

    DEFF Research Database (Denmark)

    Feldt, Liv Egholm; Hein Jessen, Mathias

    Since the beginning of the 1990’s, civil society has attracted both scholarly and political interest as the ‘third sphere’ outside the state and the market not only a normatively privileged site of communication and ‘the public sphere’, but also as a resource for democratization processes...... of the century. 2, the laws and strategies of implementing regarding the regulation of civil societal institutions (folkeoplysningsloven) since the 1970’s this paper shows how civil society in 20th century Denmark was produced both conceptually and practically and how this entailed a specific vision and version...

  5. Modal Estimation of Civil Structures Subject to Ambient and Harmonic Excitation

    DEFF Research Database (Denmark)

    Andersen, Palle; Brincker, Rune; Ventura, Carlos;

    2008-01-01

    In this paper addresses the problems of separating structural modes and harmonics arising from sinusoidal excitation. Though the problem is mostly know in mechanical engineering applications such as rotating machinery, some civil engineering applications experiences the same challenges. A robust ...

  6. SAGE Model Analysis and Application in Civil Aviation Engine Emission%SAGE模型在民航发动机排放中的应用研究

    Institute of Scientific and Technical Information of China (English)

    曹惠玲; 涂迅来; 梁大敏; 马永锋; 牛军

    2011-01-01

    在日益关注排放尤其是航空排放的当代社会,Aero2k和SAGE模型应运而生,且SAGE模型的优势更为明显.对SAGE模型的起源和模型的功能做了简单的介绍,并详细分析了SAGE模型的计算模块.通过对SAGE模型计算航空排放的过程分析,设计了排放计算流程图,并将其编成了软件.利用该软件对某些航班计算出的排放量与实际值相差不大,从而证明了SAGE模型和该软件的可行性,并通过计算出的数据初步发现了排放量和燃油消耗量与发动机类型之间的联系,也为全面评估和预测某航空公司乃至全国的航空排放奠定了基础.%Aero2k and SAGE model have been developed in the contemporary society when emissions attract extensive attention, especially on aviation emissions. In this paper, origin and functions of SAGE model are introduced simply, while its calculation model is analyzed in detail. Based on SAGE model, process analysis of calculating aviation emissions has been made and calculation procedure has been designed, then software about calculation of aviation emissions has been developed according to the procedure. There is no much deviation between true values and results based on the software, which is a good proof of feasibility of the software, with preliminary relation between emissions, fuel bum and types of engines being found, and has lay a foundation for comprehensive assessment and prediction on aviation emissions of some airline even of the entire nation.

  7. 政策驱动与伦理诉求--生态文明视阈下陈云的工程伦理思想探析%The Policy-Driver and Ethics-Appeal-On Chen Yun's Engineering Ethics from the Perspective of Ecological Civilization

    Institute of Scientific and Technical Information of China (English)

    岳世川

    2016-01-01

    Chen Yun put forward important expositions concerning construction engineering problems, which is reflected as ecological civilization from the perspective of engineering ethics, mainly in the divine life, safety first engineering ethics value goal, project decision makers and project implementation such as the community of engineering ethics responsibility, government ethics institutionalization, and specific measures of launching broad participation of the masses etc. It well reflects the engineering aspects of the ethical conscious⁃ness in ecological civilization.%陈云对建筑工程问题提出过重要论述,体现为生态文明视阈下的工程伦理思想,主要有生命神圣、安全至上的工程伦理价值目标,工程决策者和工程实施者等工程共同体的伦理责任,以及政府伦理制度化、发动群众广泛参与的具体对策等,体现了生态文明思想下工程方面的伦理自觉。

  8. Civil Surgeon Info

    Data.gov (United States)

    Department of Homeland Security — USCIS designates certain doctors (also known as civil surgeons) to perform the medical exam required for most Green Card applicants. This data set represents the...

  9. Civil & Criminal Penalties

    Data.gov (United States)

    US Consumer Product Safety Commission — When CPSC is involved in a civil or criminal investigations into violations of the Consumer Products Safety Act the Commission publishes final determinations and...

  10. Transnationalising Civil Society?

    DEFF Research Database (Denmark)

    Jørgensen, Martin Bak

    The paper takes a transnational perspective on developing an analytical framework for understanding how transnationalism interacts with civil society and how immigrant organisations use transnational strategies to challenge the pre-given positions of immigrants within given integration- and citiz......The paper takes a transnational perspective on developing an analytical framework for understanding how transnationalism interacts with civil society and how immigrant organisations use transnational strategies to challenge the pre-given positions of immigrants within given integration...

  11. Using Local History To Understand National Themes: The Yellow Fever Epidemic in Philadelphia in 1793.

    Science.gov (United States)

    Westbury, Susan

    2003-01-01

    Provides background information for a local history project about the 1793 Philadelphia (Pennsylvania) yellow fever outbreak. Offers potential project topics to help students learn about local history and understand life in the eighteenth century United States. (CMK)

  12. 78 FR 14359 - Verizon Business Networks Services, Inc., Specialist-Tech Customer Service, Philadelphia, PA...

    Science.gov (United States)

    2013-03-05

    ... Employment and Training Administration Verizon Business Networks Services, Inc., Specialist-Tech Customer Service, Philadelphia, PA; Verizon Business Networks Services, Inc., Specialist-Tech Customer Service..., 2012, applicable to workers of Verizon Business Networks Services, Inc., Order Management...

  13. Whole-House Solutions for Existing Homes: Philadelphia Housing Authority Energy-Efficiency Turnover Protocols

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-02-24

    The Philadelphia Housing Authority worked with the U.S. Department of Energy’s Building America Program to integrate energy-efficiency measures into the refurbishment process that each unit normally goes through between occupancies.

  14. 土木工程施工课程半自助式三阶段教学方法%Semi-self-help Three Period Teaching Method of Civil Engineering Construction Course

    Institute of Scientific and Technical Information of China (English)

    王尧鸿; 侯永利; 吴安利

    2016-01-01

    针对土木工程施工课程的特点,提出半自助式三阶段教学方法。该方法以学生半自助学习为主线,将每个授课内容单元分为3个阶段完成,重视实践环节,突出自主学习,注重培养学生的创新意识,教师由原来在讲台上单纯传道授业解惑的“演员”转变为教学活动的“导演”和学生身边的“教练”,而学生则由原来讲台下被动接受的“观众”转变为教学活动中积极主动的参与者,从而显著提高教学效果。%aiming at the characteristics of civil engineering construction course, this paper put forward semi-self-help three period teaching method. This teaching method takes the semi-self-help study of students as the main line and divides every teaching content unit into three period. The method pays great attention to the practice link, highlights autonomous learning and cultivates creative consciousness of students. The role of teacher is changed from the"actor"on the podium to the"director"of teaching activities and the"coach"around students. Meanwhile the role of students is changed from the passive"audiences"under platform to active participants in teaching activities. So this teaching method can signiifcantly improve the teaching effect.

  15. Engineers are from Mars and educators are from Venus: Research ...

    African Journals Online (AJOL)

    Engineers are from Mars and educators are from Venus: Research supervision in engineering and educational collaboration. ... problem-based learning in chemical engineering, the work-readiness of civil engineering students, or curriculum ...

  16. Management of Philadelphia chromosome-positive acute lymphoblastic leukemia.

    Science.gov (United States)

    Ottmann, O G

    2012-08-01

    Tyrosine kinase inhibitors (TKIs) directed against the ABL kinase are now used routinely during frontline therapy for Philadelphia chromosome-positive acute lymphoblastic leukemia (Ph+ALL) and result in hematologic remission rates exceeding 90%. Minimal residual disease levels are generally lower when TKIs are used in combination with chemotherapy rather than as monotherapy. Although outcome has improved substantially with TKI-based regimens compared with historic controls, allogeneic stem cell transplantation (SCT) in first remission provides the best chance of cure for the majority of patients eligible for SCT. Administration of imatinib after SCT further reduces molecular recurrence and is associated with greatly improved relapse-free and overall survival. The high relapse rate in non-transplanted patients is largely attributable to the emergence of leukemic clones with mutations in the tyrosine kinase domain of BCR-ABL. Ongoing studies with newer TKIs will determine whether these more potent agents are able to sustain remissions without SCT. Assessment of minimal residual disease has become an integral part of the management of Ph+ALL, as it has prognostic importance and is used to guide therapeutic intervention. Novel immunotherapeutic interventions and combinations of TKIs are currently being investigated in clinical trials and may further improve the prognosis of patients with Ph+ALL.

  17. Public Health and Law Collaboration: The Philadelphia Lead Court Study

    Science.gov (United States)

    Gracely, Ed; Pan, Sarah; Cummings, Curtis; Palermo, Peter; Gould, George

    2013-01-01

    Objectives. We determined whether Philadelphia Lead Court is effective in enforcing lead hazard remediation in the homes of children with elevated blood lead levels. Methods. We created a deidentified data set for properties with an initial failed home inspection (IFHI) for lead hazards from January 1, 1998, through December 31, 2008, and compared compliance rates within the first year and time to compliance for lead hazard remediation between 1998 and 2002 (precourt period) and between 2003 and 2008 (court period). We evaluated predictors of time to compliance. Results. Within 1 year of the IFHI, 6.6% of the precourt and 76.8% of the court cases achieved compliance (P < .001) for the 3764 homes with data. Four years after the IFHI, 18% had attained compliance in the precourt period compared with 83.1% for the court period (P < .001). A proportional hazard analysis found that compliance was 8 times more likely in the court than the precourt period (P < .001). Conclusions. Lead court was more effective than precourt enforcement strategies. Most properties were remediated within 1 year of the IFHI, and time to compliance was significantly reduced. This model court could be replicated in other cities with similar enforcement problems. PMID:23678927

  18. Interpretations of cigarette advertisement warning labels by Philadelphia Puerto Ricans.

    Science.gov (United States)

    Morris, Nancy; Gilpin, Dawn R; Lenos, Melissa; Hobbs, Renee

    2011-09-01

    This study examined Philadelphia Puerto Ricans' interpretations of the Surgeon General's warnings that appear on cigarette packaging and in advertisements. In-home family focus groups in which participants were asked to comment on magazine cigarette advertisements showed a great variety of interpretations of the legally mandated warning labels. These findings (a) corroborate and add to research in public health and communications regarding the possibility of wide variations in message interpretations and (b) support the call for public health messages to be carefully tested for effectiveness among different social groups. The article's focus on Puerto Ricans addresses the problem of misleading conclusions that can arise from aggregating all Latino subpopulations into one group. The use of a naturalistic setting to examine interpretations of messages about smoking departs from the experimental methods typically used for such research and provides new evidence that even a seemingly straightforward message can be interpreted in multiple ways. Understanding and addressing differences in message interpretation can guide public health campaigns aimed at reducing health disparities. Copyright © Taylor & Francis Group, LLC

  19. Transgender health: findings from two needs assessment studies in Philadelphia.

    Science.gov (United States)

    Kenagy, Gretchen P

    2005-02-01

    HIV/AIDS, suicide, violence, and barriers to health care access among transgender people were explored using two needs assessment surveys conducted in Philadelphia in 1997. A total of 182 people responded to a face-to-face interview or self-administered mail survey: 113 male-to-female individuals and 69 female-to-male individuals. About three-fifths of respondents had engaged in unprotected sexual activity during the past 12 months. The risk for HIV infection from unprotected sex was significantly higher among respondents of color than among white respondents. About one-third (30.1 percent) of respondents had attempted suicide. More than half of respondents had been forced to have sex, 56.3 percent had experienced violence in their homes, and 51.3 percent had been physically abused. Twenty-six percent of respondents had been denied medical care because they were transgender. These findings suggest that prevention services that specifically address HIV/AIDS, suicide, and violence among transgender people are urgently needed.

  20. EL MODELO B-LEARNING APLICADO A LA ENSEÑANZA DEL CURSO DE MATEMÁTICA I EN LA CARRERA DE INGENIERÍA CIVIL (THE MODEL B-LEARNING APPLIED TO THE THEACHING OF COURSE OF MATHEMATICS I IN CIVIL ENGINEERING

    Directory of Open Access Journals (Sweden)

    Troncoso Rodriguez Oswaldo

    2010-12-01

    Full Text Available Resumen:Esta experiencia tuvo como propósito la implementación del modelo b-learning en la enseñanza de la asignatura Matemática I, de la carrera de Ingeniería Civil, de la Universidad Centroccidental “Lisandro Alvarado” (UCLA, ubicada en Venezuela, estado Lara. En la misma se usaron de las tecnologías Web como elementos enriquecedores del proceso de enseñanza y aprendizaje, la plataforma Moodle y la combinación de estrategias propias de la educación presencial con estrategias propias de la educación virtual. La metodología utilizada corresponde a un proyecto factible orientado hacia la innovación tecnológica, pues busca resolver problemas y promover el empleo de tecnologías. El análisis de los resultados se enfocó a la eficiencia y eficacia de la propuesta. Para la eficiencia se analizaron los resultados de las entrevistas semi-estructuradas y las expectativas despertadas por el curso. Además, se consideraron los resultados de la alfabetización tecnológica y de la prueba de conocimientos previos necesarios para Matemática I. Para la eficacia se consideró el rendimiento académico y la calidad general del curso. Como conclusión se destaca que el modelo b-learning posibilita la participación activa del estudiante, pero el docente debe diseñar de manera pedagógica situaciones de aprendizaje para apoyar, informar, comunicar e interactuar pues esta es una forma se puede generar en el estudiante conocimientos específicos de la asignatura y promover en ellos el desarrollo de estrategias para el aprendizaje autónomo.Abstract:This experience had as a purpose the implementation of the b-learning model in the teaching of the Mathematics I, in the Civil Engineering, of the University Centroccidental “Lisandro Alvarado” (UCLA, located in Lara state, Venezuela. In the same one they were used of the Web technologies like wealth-producing elements of the process of education and learning, the platform Moodle and the

  1. The Research on the Construction of Extrude Teaching Material for Civil Engineering Major%土建类专业立体化教材建设的研究

    Institute of Scientific and Technical Information of China (English)

    苏德利; 任大鹏; 宋殿文

    2012-01-01

    高校土建类专业传统教材已无法适应当前我国高校创新型和技能型培养人才的需要,在教学实践中,应建立与之配套的广义教材,即立体化教材。它是基于一体化设计的教学系统,它以传统纸质教材为基础,以数字技术为平台,以项目课程为导向,以实践能力教育为目标,并将当前最新三维可视化控制技术与智能化网络技术应用于教学各环节中,形成融“教、学、练、考”为一体的理实一体化课程教学体系。立体化教材构建了土建类专业学生理论学习与生产实际相结合的教学平台,弥补了教学手段、实训条件及时间、空间上的限制,在课堂上实现教学项目与施工项目、教学过程与施工过程、在校学习与实际工作的一致性,达到事半功倍的效果。%The traditional teaching material for civil engineering major has not adapted to current requirement for creative and skilled talents, so the construction of matching extrude teaching material in practical teaching process is necessary. It is one kind of teaching system based on integrated designs, it is based on the traditional paper material. Makes digital techniques as platform, makes project curriculums as guidance, makes practical a- bility education as goal and then applies the latest three-dimensional visual control techniques and intelligent network techniques to each teaching link.Thereby form one type of integrated curriculums teaching system fusing teaching, learning, practicing, examining'together. Extrude teaching material builds one type of teaching plat- form that combines theoretical learning with production practice closely for the students majoring in civil engi- neering. Remedy the restrict existing in teaching methods, practical training condition, time and space. And real- ize the consistency between teaching project and construction project, between teaching process and construction process and

  2. APPLICATION OF FOLDED SURFACES IN CIVIL ENGINEERING

    Directory of Open Access Journals (Sweden)

    TOMA Ana Maria

    2015-06-01

    Full Text Available The paper presents the usage of folded surfaces as parts of a building system. This type of surfaces is not often used in constructions, even though the structures get to have a very special and spectacular design. The authors present some of the most known structures using the folded surfaces as a building component.

  3. ATLAS Civil Engineering at Point 1

    CERN Multimedia

    2002-01-01

    Views of ATLAS cavern under the construction, many views also from the Pit where all the parts and machines will be lowered in the future. This film includes views that are taken partly from the tunnel side also. Please note that the video is partly in form of seguence pictures on photo style.

  4. A Performance Management Framework for Civil Engineering

    Science.gov (United States)

    1990-09-01

    was reviewed. Notes of important information were taken and organized by topic for use in comparing to insights from the case analysis. ( Selltiz and...research questions, can decrease the effectiveness of such quantitative research. ( Selltiz and others, 1964:52) 37 Four options are most appropriate...knowledge on a subject with the end of establishing a definite hypothesis or research problem for further study ( Selltiz and others, 1964:50). A

  5. Parameter identification of civil engineering structures

    Science.gov (United States)

    Juang, J. N.; Sun, C. T.

    1980-01-01

    This paper concerns the development of an identification method required in determining structural parameter variations for systems subjected to an extended exposure to the environment. The concept of structural identifiability of a large scale structural system in the absence of damping is presented. Three criteria are established indicating that a large number of system parameters (the coefficient parameters of the differential equations) can be identified by a few actuators and sensors. An eight-bay-fifteen-story frame structure is used as example. A simple model is employed for analyzing the dynamic response of the frame structure.

  6. Civil engineering in the ATLAS cavern

    CERN Multimedia

    Laurent Guiraud

    2000-01-01

    Work continues in the cathedral-like cavern that will soon contain ATLAS, the largest particle detector of its type in the world. For such a huge detector, an equally giant cavern must be excavated 100 m underground. The roof must be held without any normal rests at the base; instead it will be supported by huge anchors embedded in concrete that will stop the roof from caving in, located in galleries above the cavern.

  7. ATLAS : civil engineering at Point 1

    CERN Multimedia

    2002-01-01

    The ATLAS experimental area is located in Point 1, just across the main CERN entrance, in the commune of Meyrin. There people are ever so busy to finish the different infrastructures for ATLAS. Real underground video.

  8. Contemporary engineering economics

    CERN Document Server

    Park, Chan S

    2011-01-01

    Contemporary Engineering Economics, 5/e, is intended for undergraduate engineering students taking introductory engineering economics while appealing to the full range of engineering disciplines for which this course is often required: industrial, civil, mechanical, electrical, computer, aerospace, chemical, and manufacturing engineering, as well as engineering technology. This edition has been thoroughly revised and updated while continuing to adopt a contemporary approach to the subject, and teaching, of engineering economics. This text aims not only to build a sound and comprehensive coverage of engineering economics, but also to address key educational challenges, such as student difficulty in developing the analytical skills required to make informed financial decisions.

  9. Diversity of breakpoints of variant Philadelphia chromosomes in chronic myeloid leukemia in Brazilian patients

    Directory of Open Access Journals (Sweden)

    Maria de Lourdes Lopes Ferrari Chauffaille

    2015-02-01

    Full Text Available Background: Chronic myeloid leukemia is a myeloproliferative disorder characterized by the Philadelphia chromosome or t(9;22(q34.1;q11.2, resulting in the break-point cluster regionAbelson tyrosine kinase fusion gene, which encodes a constitutively active tyrosine kinase protein. The Philadelphia chromosome is detected by karyotyping in around 90% of chronic myeloid leukemia patients, but 5-10% may have variant types. Variant Philadelphia chromosomes are characterized by the involvement of another chromosome in addition to chromosome 9 or 22. It can be a simple type of variant when one other chromosome is involved, or complex, in which two or more chromosomes take part in the translocation. Few studies have reported the incidence of variant Philadelphia chromosomes or the breakpoints involved among Brazilian chronic myeloid leukemia patients. Objective: The aim of this report is to describe the diversity of the variant Philadelphia chromosomes found and highlight some interesting breakpoint candidates for further studies. Methods: the Cytogenetics Section Database was searched for all cases with diagnoses of chronic myeloid leukemia during a 12-year period and all the variant Philadelphia chromosomes were listed. Results: Fifty (5.17% cases out of 1071 Philadelphia-positive chronic myeloid leukemia were variants. The most frequently involved chromosome was 17, followed by chromosomes: 1, 20, 6, 11, 2, 10, 12 and 15. Conclusion: Among all the breakpoints seen in this survey, six had previously been described: 11p15, 14q32, 15q11.2, 16p13.1, 17p13 and 17q21. The fact that some regions get more fre- quently involved in such rare rearrangements calls attention to possible predisposition that should be further studied. Nevertheless, the pathological implication of these variants remains unclear.

  10. Modeling epilepsy disparities among ethnic groups in Philadelphia, PA.

    Science.gov (United States)

    Wheeler, David C; Waller, Lance A; Elliott, John O

    2008-09-10

    The Centers for Disease Control and Prevention defined epilepsy as an emerging public health issue in a recent report and emphasized the importance of epilepsy studies in minorities and people of low socioeconomic status. Previous research has suggested that the incidence rate for epilepsy is positively associated with various measures of social and economic disadvantage. In response, we utilize hierarchical Bayesian models to analyze health disparities in epilepsy and seizure risks among multiple ethnicities in the city of Philadelphia, Pennsylvania. The goals of the analysis are to highlight any overall significant disparities in epilepsy risks between the populations of Caucasians, African Americans, and Hispanics in the study area during the years 2002--2004 and to visualize the spatial pattern of epilepsy risks by ethnicity to indicate where certain ethnic populations were most adversely affected by epilepsy within the study area. Results of the Bayesian model indicate that Hispanics have the highest epilepsy risk overall, followed by African Americans, and then Caucasians. There are significant increases in relative risk for both African Americans and Hispanics when compared with Caucasians, as indicated by the posterior mean estimates of 2.09 with a 95 per cent credible interval of (1.67, 2.62) for African Americans and 2.97 with a 95 per cent credible interval of (2.37, 3.71) for Hispanics. Results also demonstrate that using a Bayesian analysis in combination with geographic information system (GIS) technology can reveal spatial patterns in patient data and highlight areas of disparity in epilepsy risk among subgroups of the population.

  11. The barbarism of civilization: cultural genocide and the 'stolen generations'.

    Science.gov (United States)

    van Krieken, R

    1999-06-01

    Norbert Elias suggested that 'civilization' involves the transformation of human habitus so that violence of all sorts is gradually subjected to greater and more sophisticated forms of management and control, whereas 'decivilization' encompasses processes which produce an increase in violence and a breakdown in the stability and consistency of on-going social relations. What remains unexplored is the extent to which 'civilizing offensives', the self-conscious attempts to bring about 'civilization', have revolved around essentially violent policies and practices. This paper examines the systematic removal of indigenous Australian children from their families, largely for the social engineering purpose of the gradual and systematic annihilation of Aboriginal cultural identity. At the time, these policies and practices were constructed by most observers as contributing to the 'welfare' of Australian Aborigines, and this intersection of welfare and violence raises the possibility that civilization and decivilization, rather than being different processes which may or may not run alongside each other, interpenetrate each other so that, under certain circumstances, societies are 'barbaric' precisely in their movement towards increasing civilization. It may also be possible to describe the move away from the systematic removal of Aboriginal children since the 1970s as itself part of a civilizing process, an increasing recognition of the human rights of Australian Aborigines and of the inhumanity of those policies and practices. The paper concludes by addressing the implications for theories of civilization and decivilization, as well as more generally for our contemporary understanding of what it means to be a 'civilized' modern citizen.

  12. Creative Ventures: Ancient Civilizations.

    Science.gov (United States)

    Stark, Rebecca

    The open-ended activities in this book are designed to extend the imagination and creativity of students and encourage students to examine their feelings and values about historic eras. Civilizations addressed include ancient Egypt, Greece, Rome, Mayan, Stonehenge, and Mesopotamia. The activities focus upon the cognitive and affective pupil…

  13. History and Undergraduate Civilization.

    Science.gov (United States)

    Conroy, Peter

    1995-01-01

    It is argued that a traditional, historically-oriented course in 17th- and 18th-century French civilization continues to be an appropriate and effective approach for undergraduate French study, in preparation for later, more sophisticated cultural analysis. Four course components are discussed: class lectures; literary text selection; textbook…

  14. Re-thinking civil disobedience

    Directory of Open Access Journals (Sweden)

    Theresa Züger

    2013-11-01

    Full Text Available This article points out a struggle of today’s societies with the traditional concepts of civil disobedience and stresses the need for reevaluation of the concept of civil disobedience for policy making and public discourse. Starting with a minimal definition of civil disobedience, the article introduces Hannah Arendt’s approach for a legitimisation of civil disobedience and discusses her ideas for digital actions, which are increasingly framed as digital forms of civil disobedience. Addressing WikiLeaks as an example of digital civil disobedience, the author problematises the internal secrecy of WikiLeaks and the focus on Julian Assange as a single decision-maker. Both aspects challenge Arendt’s understanding of legitimate civil disobedience. Even though traditional criteria of civil disobedience need to be revisited in the digital age, organisations or disobedience actors might themselves in their actions be well-advised to comply with the principles they fight for.

  15. Civil partnerships five years on.

    Science.gov (United States)

    Ross, Helen; Gask, Karen; Berrington, Ann

    2011-01-01

    The Civil Partnership Act 2004, which came into force in December 2005 allowing same-sex couples in the UK to register their relationship for the first time, celebrated its fifth anniversary in December 2010. This article examines civil partnership in England and Wales, five years on from its introduction. The characteristics of those forming civil partnerships between 2005 and 2010 including age, sex and previous marital/civil partnership status are examined. These are then compared with the characteristics of those marrying over the same period. Further comparisons are also made between civil partnership dissolutions and divorce. The article presents estimates of the number of people currently in civil partnerships and children of civil partners. Finally the article examines attitudes towards same-sex and civil partner couples both in the UK and in other countries across Europe.

  16. Perspective: Academic obstetrics-gynecology departments in the city of Philadelphia: are the wheels coming off?

    Science.gov (United States)

    Croft, Damien J

    2011-03-01

    Maternity care in Philadelphia is in an unprecedented and precarious situation, as all the community hospitals that once provided maternity care services have either closed completely or stopped providing maternity services. Six academic medical centers (AMCs) in the city of Philadelphia now provide care to a population of 1.5 million requiring increasingly complex and expensive maternity care, at the same time as insurance premiums and the malpractice crisis in Pennsylvania peaked. The AMCs are able to continue providing maternity care to this population that includes a large proportion of poor, minority, and un- or underinsured patients thanks to government subsidization of resident education, the services provided by resident physicians, and the influx of government and industry research funds, but the financial outlook of academic obstetrics-gynecology departments in this city is dire. Obstetric academic medicine in Philadelphia has come to more closely resemble a "big wheel" tricycle than Flexner's "three-legged stool." Clinical medicine is the driver (the large front wheel and pedal) pulling along education and research, the two smaller wheels in the back. A maternity care alliance is needed in Philadelphia allowing area AMCs to pool and trade resources, reduce costs, improve quality and innovation, and share risks. Philadelphia may serve as an early warning for other cities and AMCs around the country and has the opportunity to serve as a model for how to overcome these serious challenges.

  17. The Limitation of Western Civilization And the Revival of Oriental Civilization

    Institute of Scientific and Technical Information of China (English)

    Su; Hao

    2014-01-01

    <正>In the distribution of modem world civilizations,the Oriental civilization and Western civilization are the two major civilization systems.Western civilization is often represented by the Christian civilization in Europe and North America on both sides across the North Atlantic.Oriental civilization appears more diversified,among which the Chinese civilization,India civilization and Islamic civilization are the most influential

  18. Exploring Civilizations with 'Seven Wolves'

    Institute of Scientific and Technical Information of China (English)

    Yang Jie

    2007-01-01

    @@ Beijing - A farewell party for the CCTV (China Central Television) crew 'Road to Civilizations-Global Exploration Tour of World Major Civilizations' - the world's first TV series documenting the journey of exploring the 12 civilizations in the human world, was sponsored by Fujian Septwolves Industry Co., Ltd and held at the Beijing Landmark hotel on 16 January.

  19. Civility in Classes and Sports

    Science.gov (United States)

    Lumpkin, Angela

    2010-01-01

    Civility is a polite or courteous act, expression, or standard of conduct, including the display of respect and tolerance to everyone. Teaching and modeling civility in classes and with sport teams is essential so students and athletes can learn the importance of and demonstrate civility in their interactions with others. Teachers and coaches…

  20. Engineering surveying

    CERN Document Server

    Schofield, W

    2001-01-01

    The aim of Engineering Surveying has always been to impart and develop a clear understanding of the basic topics of the subject. The author has fully revised the book to make it the most up-to-date and relevant textbook available on the subject.The book also contains the latest information on trigonometric levelling, total stations and one-person measuring systems. A new chapter on satellites ensures a firm grasp of this vitally important topic.The text covers engineering surveying modules for civil engineering students on degree courses and forms a reference for the engineering surveying module in land surveying courses. It will also prove to be a valuable reference for practitioners.* Simple clear introduction to surveying for engineers* Explains key techniques and methods* Details reading systems and satellite position fixing