WorldWideScience

Sample records for civil engineering point

  1. ATLAS Civil Engineering Point 1

    CERN Multimedia

    Jean-Claude Vialis

    1998-01-01

    Different phases of realisation to Point 1 : zone of the ATLAS experiment After watching this film you can get the view of the civil engineering work at POINT1 where the ATLAS will be built. 03-11-1998 The video starts with the view of the POINT1 taken from the roof of the building 33. 04-11-1998 View of the installation of the entrance of the SDX1 18/19-11-1998 Installation of the rafters to the building PX15

  2. ATLAS Civil Engineering Point 1

    CERN Multimedia

    Jean-Claude Vialis

    1999-01-01

    ATLAS Civil Engineering - Point 1 In the film you can see various stages of construction in Point 1: that is the experiment zone for ATLAS experimentation. One part of the video is filmed on the surface of Point 1. Therefore you can get the view of the hall SX 1 and the cranes. Cranes are located close to the ridge of the hall roof. The film gives you the view of the hall that covers the caps and the wells to underground cavern where the experiment will be implemented. The machinery for excavation lifts and cranes as well as the stock areas can also be seen. There are iron mounting and concrete works too

  3. ATLAS Civil Engineering Point 1

    CERN Multimedia

    Jean-Claude Vialis

    1998-01-01

    Different phases of the PX 15 realisation to Point 1: zone of the ATLAS experiment 19-11-1998 Realisation of the Walkway for PX 15 and the putting up scaffolds 15-01-1999 Film from the surface of Point 1 and descent in the well of PX 15

  4. ATLAS Civil Engineering Point 1

    CERN Multimedia

    Jean-Claude Vialis

    1999-01-01

    Different phases of realisation to Point 1 : zone of the ATLAS experiment The ATLAS experimental area is located in Point 1, just across the main CERN entrance, in the commune of Meyrin. There people are ever so busy to finish the different infrastructures for ATLAS. Real underground video. The film has original working sound.

  5. ATLAS: civil engineering Point 1

    CERN Multimedia

    2000-01-01

    The construction work at point one was a massive site including overground and underground work. Point 1 under construction is worth to see.Tools and machinery used during the construction and the multible scenes with people working in different parts of point1. Scenes from the 3D CAD office and some talking in english. Printing out drawings and later views of the empty tunnel were the LHC accelerator is installed 80m under the surface.The film gives the view to the close history in other words to the time before the installations.

  6. ATLAS Civil Engineering Point 1

    CERN Multimedia

    Jean-Claude Vialis

    2001-01-01

    Different phases of realisation to Point 1: zone of the ATLAS experiment 14-02-2001Realising anchorage, isolations and scaffoldings at UX 15 18-04-2001Concreting the arch and posing the metal reinforcements at UX 15

  7. ATLAS Civil Engineering Point 1

    CERN Multimedia

    Jean-Claude Vialis

    2000-01-01

    Different phases of realisation to Point 1 : zone of the ATLAS experiment The ATLAS experimental area is located in Point 1, just across the main CERN entrance, in the commune of Meyrin. There people are ever so busy to finish the different infrastructures for ATLAS. Real underground video. When passing throw the walls the succeeding can be heard and seen. The film has original working sound.

  8. ATLAS Civil Engineering Point 1

    CERN Multimedia

    Jean-Claude Vialis

    2000-01-01

    Different phases of realisation to Point 1 : zone of the ATLAS experiment The film is about the excavation work in the cavern and tunnels of ATLAS experiment in the point 1. You can see people working for iron mounting at the side of the pit where the parts of the detector will be lowered in the future. Partly the film concentrates the USA 15 and the work done there.

  9. ATLAS Civil Engineering Point 1

    CERN Multimedia

    2000-01-01

    Different phases of realisation to Point 1: zone of the ATLAS experiment 18-10-2000 UX 15 cavern and PX16 15-12-2000 USA 15 - UX 15 concreting the arch 14-02-2001 UX 15 - ancrages, isolation and scaffolding

  10. ATLAS: civil engineering Point 1

    CERN Multimedia

    2000-01-01

    The ATLAS experimental area is located in Point 1, just across the main CERN entrance, in the commune of Meyrin. There people are busy to finish the different infrastructures for ATLAS. Real underground video. Nice view from the surface to the cavern from the pit side - all the big machines looked very small. The film has original working sound.

  11. ATLAS: civil engineering Point 1

    CERN Multimedia

    1998-01-01

    Different phases of the SX 15 realisation to Point 1 : zone of the ATLAS experiment 00:13:43 Realization of the concrete floor 19-10-1998 00:29:26 Putting up the metal rails for the roof 19-10-1998 00:33:42 Road alignment entering to POINT1 and in Bollot wood 27-10-1998 00:41:53 General sight of the buildings in construction Building SX gives the cover for the work at the experiment It is used to shelter the Pit and the work for the underground cavern as well as for covering the ground work with big cranes that allows the lowering of the components belonging to the detector. The hall is also used as a detector part storage and cover during the assembly. It shelters small workshops of mechanics and electronics necessary for the assembly and the maintenance of the ATLAS experiment.

  12. ATLAS Civil Engineering Point 1

    CERN Multimedia

    Jean-Claude Vialis

    2000-01-01

    Point 1 -the zone for the ATLAS experiment. The film includes various stages of construction, especially from the pit of UX 15. Underground work includes the excavation work of the cavern, demolishing the central pillars and posing the support bars for the pit. The UX 15 - will shelter the detector itself. The cavern is located about 100 m below the surface and it is 53 m long, 30 m wide and 34.90 m high.

  13. ATLAS : civil engineering at Point 1

    CERN Multimedia

    CERN Audiovisual Unit

    2002-01-01

    The ATLAS experimental area is located in Point 1, just across the main CERN entrance, in the commune of Meyrin. There people are ever so busy to finish the different infrastructures for ATLAS. Real underground video.

  14. Contract Management of LHC Civil Engineering at Point 5

    CERN Document Server

    Osborne, J A

    1999-01-01

    Civil engineering work commenced in August 1998 at LEP Point 5 for the underground and surface works necessary to accommodate the CMS detector for the LHC project. The principal underground works consist of two parallel caverns, separated by a support pillar, two new shafts, a number of smaller connection and service galleries and tunnel enlargements on the existing LEP tunnel. The surface works consist of the 140 m long SX building for the detector assembly and numerous other steel and concrete structures necessary for the installation and operation of CMS. The civil engineering design and supervision has been awarded to a joint venture of Gibb (UK), SGI (Switzerland) and Geoconsult (Austria), and the contracting to a joint venture of Dragados (Spain) and Seli (Italy) for 112 MCHF. The aim of this paper is to discuss the management of this contract and in particular how the various parties interact in order to work most efficiently.

  15. Environmental Ethics and Civil Engineering.

    Science.gov (United States)

    Vesilind, P. Aarne

    1987-01-01

    Traces the development of the civil engineering code of ethics. Points out that the code does have an enforceable provision that addresses the engineer's responsibility toward the environment. Suggests revisions to the code to accommodate the environmental impacts of civil engineering. (TW)

  16. Civil Engineering Dispute Resolution

    CERN Document Server

    Osborne, J

    2001-01-01

    Construction work on the civil engineering contract started at Point 5 in August 1998. The new surface buildings and underground structures are necessary to accommodate the CMS detector for the LHC Project. The principal underground works consist of two new shafts, two parallel caverns separated by a supporting pillar, and a number of small connection tunnels and service galleries. A dispute resolution procedure has been included in the contract, whereby a Panel of Adjudicators may be called upon to make a decision in the case of a difference or dispute between the parties. The aim of this paper is to present CERN's first experience of civil engineering Adjudication arising from problems encountered with the ground freezing technique employed to allow construction of two new shafts.

  17. Civil engineering terminology

    OpenAIRE

    Kuhta, Milan; Brunčič, Ana

    2015-01-01

    Among all crises, which have struck Slovenian construction industry, the crisis of civil engineering terminology is perhaps less noticeable, but still as important as all the others. The lack of fundamental characteristics of proper terminology causes a reasonable doubt whether Slovenian civil engineering terminology actually exists. After three editions of Splošni tehniški slovar (A General Technical Dictionary), a preparation of the new civil engineering dictionary represents one step towar...

  18. Point 5 - civil engineering : SX5, SX, travelling cranes, trucks, CMS modules, surface views, pit PX

    CERN Multimedia

    CERN AC team

    2000-01-01

    > de 00:00 à 14:00 le 09 décembre 1995 Forage et carottage du sous-sol pour connaître l’état du terrain pour les futurs travaux souterrains de Génie Civil > de 14:01 à 19:15mn le 03 février 1997 Sondage et carottage dans le tunnel LEP/LHC vers le point2 > de 19 :16 à 38 :00mn le 13 juin 1997 Construction d’une galerie souterraine de liaison et du nouveau bâtiment de ventilation SU ?? sur le site du Point5 Vues du point5 avant l’agrandissement du site pour CMS

  19. Point 5 - civil engineering : SX5, SX, travelling cranes, trucks, CMS modules, surface views, pit PX

    CERN Multimedia

    1995-01-01

    > de 00:00 à 14:00 le 09 décembre 1995 Forage et carottage du sous-sol pour connaître l’état du terrain pour les futurs travaux souterrains de Génie Civil > de 14:01 à 19:15mn le 03 février 1997 Sondage et carottage dans le tunnel LEP/LHC vers le point2 > de 19 :16 à 38 :00mn le 13 juin 1997 Construction d’une galerie souterraine de liaison et du nouveau bâtiment de ventilation SU ?? sur le site du Point5 Vues du point5 avant l’agrandissement du site pour CMS

  20. Artificial Intelligence in Civil Engineering

    Directory of Open Access Journals (Sweden)

    Pengzhen Lu

    2012-01-01

    Full Text Available Artificial intelligence is a branch of computer science, involved in the research, design, and application of intelligent computer. Traditional methods for modeling and optimizing complex structure systems require huge amounts of computing resources, and artificial-intelligence-based solutions can often provide valuable alternatives for efficiently solving problems in the civil engineering. This paper summarizes recently developed methods and theories in the developing direction for applications of artificial intelligence in civil engineering, including evolutionary computation, neural networks, fuzzy systems, expert system, reasoning, classification, and learning, as well as others like chaos theory, cuckoo search, firefly algorithm, knowledge-based engineering, and simulated annealing. The main research trends are also pointed out in the end. The paper provides an overview of the advances of artificial intelligence applied in civil engineering.

  1. Civil Engineering Technology Needs Assessment.

    Science.gov (United States)

    Oakland Community Coll., Farmington, MI. Office of Institutional Planning and Analysis.

    In 1991, a study was conducted by Oakland Community College (OCC) to evaluate the need for a proposed Civil Engineering Technology program. An initial examination of the literature focused on industry needs and the job market for civil engineering technicians. In order to gather information on local area employers' hiring practices and needs, a…

  2. Civil engineering experiences in Portugal

    OpenAIRE

    Aguiar, J. L. Barroso de

    2009-01-01

    The good cooperation established between Universities, Laboratory National of Civil Engineering and private companies made possible the execution of a considerable number of civil engineering works by Portugueses, inside and outside the country. Some good examples are presented in this paper.

  3. B 150 civil engineering futures

    DEFF Research Database (Denmark)

    Foreword B150 –Civil Engineering Futures consists of interviews made, articles written, and projects presented in connection with the 150th anniversary celebrations of the study of civil engineering in Denmark. Instead of a historical retrospect, it was decided to look into the future. What...... related to sustainability – a Workshop on Traffic. The workshop discussed traffic prognoses and the way they are used in the preparation of urban transport and traffic strategies. Civil engineer Jonas Eliasson spoke about the experience in Sweden of developing a database for traffic prognoses. The main...

  4. Civil Engineering Technology Program Standards.

    Science.gov (United States)

    Georgia Univ., Athens. Dept. of Vocational Education.

    This publication contains statewide standards for the civil engineering program in Georgia. The standards are divided into 12 categories: foundations (philosophy, purpose, goals, program objectives, availability, evaluation); admissions (admission requirements, provisional admission requirements, recruitment, evaluation and planning); program…

  5. Teaching Mathematics to Civil Engineers

    Science.gov (United States)

    Sharp, J. J.; Moore, E.

    1977-01-01

    This paper outlines a technique for teaching a rigorous course in calculus and differential equations which stresses applicability of the mathematics to problems in civil engineering. The method involves integration of subject matter and team teaching. (SD)

  6. Civil engineering projects realization management

    OpenAIRE

    Mirković Slobodan

    2006-01-01

    The paper treats the management of the realization of civil engineering projects or civil engineering buildings construction management, as a complex dynamic process, which entails a large number of strategic and operative decisions which are important for an efficient, cost effective, and economic construction. The management process execution is not possible without the functions such as planning, organizing, coordination and control. Planning as the initial function, important for the fore...

  7. Space civil engineering - A new discipline

    Science.gov (United States)

    Sadeh, Willy Z.; Criswell, Marvin E.

    1991-01-01

    Space Civil Engineering is an emerging engineering discipline that focuses on extending and expanding the Civil Engineering know-how and practice to the development and maintenance of infrastructure on celestial bodies. Space Civil Engineering is presently being developed as a new discipline within the Department of Civil Engineering at Colorado State University under a recently established NASA Space Grant College Program. Academic programs geared toward creating Space Civil Engineering Options at both undergraduate and graduate levels are being formulated. Basic ideas and concepts of the curriculum in the Space Civil Engineering Option at both undergraduate and graduate levels are presented. The role of Space Civil Engineering in the Space Program is discussed.

  8. Communication Needs of Thai Civil Engineering Students

    Science.gov (United States)

    Kaewpet, Chamnong

    2009-01-01

    This article reports on an examination of the communication needs of a group of Thai civil engineering students. Twenty-five stakeholders helped identify the communication needs of the students by participating in individual interviews. These included employers, civil engineers, civil engineering lecturers, ex-civil engineering students of the…

  9. Job Prospects for Civil Engineers.

    Science.gov (United States)

    Basta, Nicholas

    1985-01-01

    Government programs and renewed industrial activity have combined with stable enrollments to create bright job prospects for civil engineers. Areas with good opportunities include highway reconstruction and rehabilitation, water-resource management, and new factory construction. The subspecialty of structural engineering has a growing need in…

  10. Ecological Engineering and Civil Engineering works

    OpenAIRE

    Van Bohemen, H.D.

    2004-01-01

    This thesis provides a survey of the research results of the relationship between on the one hand the construction, management and maintenance of civil engineering works, and on the other hand the environment, nature and landscape, with the main focus on motorways and coastal protection. The growing number and increase in size of civil engineering works and the growing need for protection measures of the sandy coasts have led to an ever increasing risk of adverse effects on the nature and lan...

  11. Space Civil Engineering option - A progress report

    Science.gov (United States)

    Criswell, Marvin E.; Sadeh, Willy Z.

    1992-01-01

    Space Civil Engineering is an emerging engineering discipline that focuses on extending and expanding Civil Engineering to the development, operation, and maintenance of infrastructures on celestial bodies. Space Civil Engineering is presently being developed as a new discipline within the Department of Civil Engineering at Colorado State University and with support of the NASA Space Grant College Program. Academic programs geared toward creating Space Civil Engineering Options at both undergraduate and graduate levels are being formulated. Basic ideas and concepts and the current status of the curriculum in the Space Civil Engineering Option primarily at the undergraduate level are presented.

  12. Civil Engineering Technology Program Guide.

    Science.gov (United States)

    Georgia Univ., Athens. Dept. of Vocational Education.

    This program guide presents civil engineering technology curriculum for technical institutes in Georgia. The general information section contains the following: purpose and objectives; program description, including admissions, typical job titles, and accreditation and certification; and curriculum model, including standard curriculum sequence and…

  13. Geometric procedures for civil engineers

    CERN Document Server

    Tonias, Elias C

    2016-01-01

    This book provides a multitude of geometric constructions usually encountered in civil engineering and surveying practice.  A detailed geometric solution is provided to each construction as well as a step-by-step set of programming instructions for incorporation into a computing system. The volume is comprised of 12 chapters and appendices that may be grouped in three major parts: the first is intended for those who love geometry for its own sake and its evolution through the ages, in general, and, more specifically, with the introduction of the computer. The second section addresses geometric features used in the book and provides support procedures used by the constructions presented. The remaining chapters and the appendices contain the various constructions. The volume is ideal for engineering practitioners in civil and construction engineering and allied areas.

  14. Civil engineering for power plants

    International Nuclear Information System (INIS)

    Power plant structures are conspicuously visible and have an impact on our landscape. In the opinion of a critical public, a successful external design can greatly enhance acceptance of an undertaking and its plants. This paper considers the subjects - utilization of by-products, aggregation of series experience in the construction of nuclear power plants, architecture in power plant construction, water works for adequate cooling water supply and also quality assurance in civil engineering and optimum application of electronic data processing. (orig.)

  15. History of Civil Engineering Modal Analysis

    DEFF Research Database (Denmark)

    Brincker, Rune

    2008-01-01

    techniques are available for civil engineering modal analysis. The testing of civil structures defers from the traditional modal testing in the sense, that very often it is difficult, or sometimes impossible, to artificially excite a large civil engineering structure. Also, many times, even though an...

  16. Educating Civil Engineers for Developing Countries

    Science.gov (United States)

    Stanley, D.

    1974-01-01

    Based on engineering teaching experience in Africa and Asia, ideas are presented on educating civil engineers for developing countries, especially those in Africa. Some of the problems facing educational planners, teachers, and students are addressed, including responsibilities of a newly graduated civil engineer, curriculum development, and…

  17. Civil Engineering: Improving the Quality of Life.

    Science.gov (United States)

    One Feather, Sandra

    2002-01-01

    American Indian civil engineers describe the educational paths that led them to their engineering careers, applications of civil engineering in reservation communities, necessary job skills, opportunities afforded by internship programs, continuing education, and the importance of early preparation in math and science. Addresses of 12 resource Web…

  18. Study of the effects of a tornado on a nuclear plant(from the point of view of civil engineering)

    International Nuclear Information System (INIS)

    is to analyze the applicability of Regulatory Guide 1.76 design basis Tornado and Tornado Missiles for Nuclear Power Plants, assessing the guide / standard compliance of a nuclear facility with respect to it, identifying the actions required for the compliance if applicable and valuation, with engineering judgment, the benefits for the plant would total or partial implantation of the guide.

  19. IMPROVING THE EFFECTIVENESS AND IMAGE OF THE BUILDING AND CIVIL ENGINEERING PROCESS BY USING AN AWARD POINT SYSTEM IN THE AWARD OF CONTRACTS

    Directory of Open Access Journals (Sweden)

    Kobus Grobler

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: One of the main causes leading to the perceived ineffectiveness and poor image of the building and civil engineering process seems to be the fact that clients often use lowest price as the only selection criterion in the award of contracts. One of the main recommendations of the doctoral research thesis of Grobler [1] is the introduction of an award point system that not only compares bidders on price, but also on their previous records of: quality of work, management ability and relations with other role players.

    AFRIKAANSE OPSOMMING: Een van die hoof oorsake wat aanleiding gee tot die persepsie dat die bou-en siviele ingenieursweseproses oneffektief is en ‘n swak beeld het, is die feit dat kliënte gereeld laagste prys as die enigste maatstaf gebruik in die toekenning van kontrakte. Een van die hoof voorstelle van die doktorale proefskrif van Grobler [1] is die instelling van ‘n toekenningspuntesisteem wat nie net tenderaars beoordeel op prys nie, maar ook op vorige rekords van: kwaliteit van werk, bestuursvermoë en verhoudinge met ander rolspelers.

  20. Competencies Framework for Civil Engineer in Thailand

    Directory of Open Access Journals (Sweden)

    Phanudej Kudngaongarm

    2012-02-01

    Full Text Available The civil engineering industry now faces with many problems such as poorly planned projects, breach of the delivery date, erroneous budget estimation, uncontrolled system functionality changes, and inappropriate documentation that all lead to the dissatisfaction of clients. One of the main concerns of civil engineering industry is to develop the talent of its human resources, since the quality and innovation of its products and services depend to a great extent on the knowledge, the ability and the talent that civil engineers apply in the development process. A competency framework defines a set of knowledge, skills, and behaviors that professionals must have to excel in their careers. A competency framework facilitates the identification of training needs and guides the design of a professional development program. In this paper we propose a competency framework for civil engineers, whose design is based on the activities and interactions that they perform during the civil development process. Thus, competency framework for civil engineers defines a set of knowledge, abilities and key behaviors, with special emphasis in the soft skills. The organization that adopts this framework must define and integrate the specific competencies needed by for civil engineers to allow them to fulfill their goals.

  1. Competencies Framework for Civil Engineer in Thailand

    OpenAIRE

    Phanudej Kudngaongarm; Chuchai Sujivorakul

    2012-01-01

    The civil engineering industry now faces with many problems such as poorly planned projects, breach of the delivery date, erroneous budget estimation, uncontrolled system functionality changes, and inappropriate documentation that all lead to the dissatisfaction of clients. One of the main concerns of civil engineering industry is to develop the talent of its human resources, since the quality and innovation of its products and services depend to a great extent on the knowledge, the ability a...

  2. Mechanics, Models and Methods in Civil Engineering

    CERN Document Server

    Maceri, Franco

    2012-01-01

    „Mechanics, Models and Methods in Civil Engineering” collects leading papers dealing with actual Civil Engineering problems. The approach is in the line of the Italian-French school and therefore deeply couples mechanics and mathematics creating new predictive theories, enhancing clarity in understanding, and improving effectiveness in applications. The authors of the contributions collected here belong to the Lagrange Laboratory, an European Research Network active since many years. This book will be of a major interest for the reader aware of modern Civil Engineering.

  3. Civil Engineering in Primary Schools

    Science.gov (United States)

    Brown, Martin; Strong, Alan

    2010-01-01

    For many children of primary school age, an engineer is the man who comes to service the central heating system or who fixes the family car when it breaks down. Most have never met a "real" professional engineer, and have no idea of what is involved in the exciting world of engineering. Most assume that engineers are men. To try to remove these…

  4. Opportunities in Civil Engineering. [VGM Career Horizons Series].

    Science.gov (United States)

    Hagerty, D. Joseph; Heer, John E., Jr.

    This book presents information on career opportunities in civil engineering. Chapter 1 focuses on the scope of civil engineering, discussing: role of scientist, engineer, and technologists; engineering and engineering technology; civil engineer's role and obligations; and other information. Chapter 2 considers such aspects of the education for…

  5. Retraining the Modern Civil Engineer.

    Science.gov (United States)

    Priscoli, Jerome Delli

    1983-01-01

    Discusses why modern engineering requires social science and the nature of planning. After these conceptional discussions, 12 practical tools which social science brings to engineering are reviewed. A tested approach to training engineers in these tools is then described. Tools include institutional analysis, policy profiling, and other impact…

  6. Optimal Vibration Control of Civil Engineering Structures

    DEFF Research Database (Denmark)

    Thesbjerg, Leo

    In designing large civil engineering structures, an important consideration is prospective dynamic loadings which may include earthquake ground motion, wind gusts, severe sea states and moving vehicles, rotating and reciprocating machinery and others. successful design of such structures requires...... providing for the safety and integrity of the structure, and in some cases also providing for a measure of comfort for the occupants during such loading which the structure and its occupants must endure. Due to these uncertainties, the civil engineering community has traditionally adopted a very...

  7. CIVIL ENGINEERS' ROLES IN PUBLIC WORKS

    Science.gov (United States)

    Murata, Teruaki

    Recently, the public interests are becoming high in the way of executing public works and the future direction of infrastructure development, which raises nation-wide discussion on these issues. How should we make our country's growth strategy for sustainable development? How should we realize the grand design of infrastructure needed for the implementation of such a strategy? It is obvious that further discussions are needed for these challenging questions. With an aim to promote such discussions, this paper reviews the history of public works and the professional practices (or accomplishments) of our great civil engineers, and discusses the future of public works and the roles of civil engineers based on their origin. Further, in this paper, the author, as the chairman of the Public Works Committee of Japan Civil Engineering Contractors Association, introduces the Association's proposal of "realization of an attractive construction industry." However, for its realization, sustainable institutional arrangements under social consensus are indispensable. Also, individual engineer must establish his/her own identity based on sense of social ethics. It is the author's hope that, through these journals, the professional practices of civil engineers will be widely known to the public with objective logics and discussed to achieve social consensus.

  8. Risk Analysis in Civil Engineering

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle

    Until fairly recently there has been a tendency for structural engineering to be dominated by deterministic thinking, characterised in design calculations by the use of specified minimum material properties, specified load intensities and by prescribed procedures for computing stresses and...

  9. Analyzing uncertainty in civil engineering

    CERN Document Server

    Fellin, Wolfgang; Oberguggenberger, Michael; Vieider, Robert

    2005-01-01

    This volumeaddressestheissueofuncertaintyincivilengineeringfromdesign toconstruction. Failures do occur in practice. Attributing them to a residual risk or a faulty execution of the projectdoesnotproperlycover the range of causes. A closer scrutiny of the design, the engineering model, the data, the soil-structure-interactionand the model assumptions is required. Usually, the uncertaintiesininitialandboundaryconditionsaswellasmaterialparameters are abundant. Current engineering practice often leaves these issues aside, despite the factthatnewscienti?c tools have been developed in the past deca

  10. Teaching Structural Design in Civil Engineering Technology.

    Science.gov (United States)

    Metwally, Ashraf

    This paper is a description of a college course in structural design, which in this case serves as the capstone of the program in Civil Engineering Technology at the College of Staten Island (New York). Fourteen weeks of class lecture topics, activities, and assignments are delineated. Coverage includes building codes, loads calculation,…

  11. Characterization of material for civil engineering

    OpenAIRE

    Cappelletto, Elisa

    2014-01-01

    Materials are the heart of engineering, which can be defined as the creative and rational use of materials for practical purposes. Materials have had an essential role in the development of civil engineering: from the beginning of human evolution, man has used many different materials to build houses, bridges, roads and countless other structures to make his life easier. Ancient populations used the raw materials at their disposal, such as stone, clay and timber. Over the centuries, the searc...

  12. Women in civil engineering: continuity and change.

    OpenAIRE

    Watts, Jacqueline Halina

    2003-01-01

    This thesis explores the career experiences of women civil engineers in the UK and examines how women negotiate their place in a highly male-dominated profession. T he thesis considers why women are under-represented in this profession, are rarely appointed to senior management positions and how changes in the business pattern of UK engineering consulting companies has created barriers or opportunities for women. Uncovering the detail of women's career expectations and experience was more...

  13. Passive control of civil engineering structures

    OpenAIRE

    Braz-César, M.T.; Barros, Rui

    2013-01-01

    Structural control has been a major research area i n aerospace engineering aimed at solving very complex problems related with analysis and des ign of flexible structures. The efficiency of these strategies to improve the performance of s everal structural systems suggests its potential to reduce damage and control earthquake4i nduced response in civil structures. Therefore, this technology has been well accepted b y structural engineers as a feasible approach t...

  14. Biotechnologies and biomimetics for civil engineering

    CERN Document Server

    Labrincha, J; Diamanti, M; Yu, C-P; Lee, H

    2015-01-01

    Putting forward an innovative approach to solving current technological problems faced by human society, this book encompasses a holistic way of perceiving the potential of natural systems. Nature has developed several materials and processes which both maintain an optimal performance and are also totally biodegradable, properties which can be used in civil engineering. Delivering the latest research findings to building industry professionals and other practitioners, as well as containing information useful to the public, ‘Biotechnologies and Biomimetics for Civil Engineering’ serves as an important tool to tackle the challenges of a more sustainable construction industry and the future of buildings.

  15. Virginia Tech's Michael Duncan receives civil engineering award

    OpenAIRE

    Nystrom, Lynn A.

    2010-01-01

    J. Michael Duncan, Virginia Tech University Distinguished Professor Emeritus of the Via Department of Civil and Environmental Engineering, is the 2010 recipient of the G. Brooks Earnest Award and Lecture from the American Society of Civil Engineers' Cleveland Section.

  16. HKU's double professional civil engineering and law programme

    OpenAIRE

    Yeung, AT; Ng, ST; Tham, LG; Lee, PKK

    2010-01-01

    The scale and complexity of civil engineering projects are increasing exponentially. Coupled with the growing trend of globalisation, the demand for high-calibre civil engineers who are also knowledgeable in legal matters is increasing. Driven by an aspiration to prepare civil engineering graduates with a solid foundation in both civil engineering and law, The University of Hong Kong has developed the first 5-year credit-based double professional degree programme in Hong Kong, which leads to ...

  17. William Knocke receives 2008 Virginia Outstanding Civil Engineer Award

    OpenAIRE

    Daniilidi, Christina

    2008-01-01

    William R. Knocke, W.C. English Professor and head of the Charles E. Via, Jr. Department of Civil and Environmental Engineering at Virginia Tech, was awarded the 2008 Virginia Outstanding Civil Engineer Award at the Virginia Section of the American Society of Civil Engineers' (ASCE) banquet, held recently in Williamsburg, Va.

  18. Some Basic Considerations about the Necessities and Possibilities of Cooperation between Civil Engineers and Engineering Geologists

    Science.gov (United States)

    Katzenbach, Rolf; Bachmann, Gregor

    The education of civil engineers and engineering geologists is different. While civil engineers are commonly educated and trained in mathematical and mechanical based sciences as statics, geotechnics, structural engineering etc. the education of engineering geologists is mainly based on natural science, added with some engineering courses. Nevertheless, the careers of both have in spite of their different priorities and capabilities - which all are necessary in complex building projects - several points of contact. Especially during the construction of tunnels, the cooperation of civil engineers and engineering geologists is important. For example the inhomogeneous rock and groundwater conditions have decisive importance for the bearing and deformation behaviour of those constructions. Therefore a detailed investigation program and a qualified geotechnical and geological interpretation and modelling is necessary. The typical field of a civil engineer is the examination of the structural stability (Ultimate Limit State - ULS) and the serviceability (Serviceability Limit State - SLS) of the construction due to Euro-Code (especially EC 1 and EC 7) and the corresponding national technical standards (codes, recommendations, guidelines etc.). A main activity of an engineering geologist is the assessment of the natural circumstances. The cooperation of both professions is settled in the valuation of the subsoil conditions before and during the construction process. The cooperation of engineering geologists and geotechnical engineers lies in the assessment of the subsoil conditions before and during the construction process of ambitious projects with special regard to the bearing and deformation behaviour which is highly influenced by the inhomogeneity and the variance of the subsoil conditions.

  19. Civil engineering in power plant technology

    International Nuclear Information System (INIS)

    Guaranteeing our power supplies requires increasingly large, bold or novel construction works (for example, 200 m chimney with installation of stays over a wide area for a wind power plant in Spain; up to 400 m structure height on floating drill rigs). The layman admires the impressiveness with which these demand great ability and responsibility on the part of the civil engineer. The inland power station builder has to concentrate on few spectacular methods of construction or dimensions. The success of the total undertaking is however no less attributable to structural prerequisites. Civil engineering problems have to be displaced by means of static and dynamic problems in order to meet licensing requirements (planning of construction supervision, fire prevention, structure of supply and disposal). (orig.)

  20. Probability, statistics, and decision for civil engineers

    CERN Document Server

    Benjamin, Jack R

    2014-01-01

    Designed as a primary text for civil engineering courses, as a supplementary text for courses in other areas, or for self-study by practicing engineers, this text covers the development of decision theory and the applications of probability within the field. Extensive use of examples and illustrations helps readers develop an in-depth appreciation for the theory's applications, which include strength of materials, soil mechanics, construction planning, and water-resource design. A focus on fundamentals includes such subjects as Bayesian statistical decision theory, subjective probability, and

  1. Applied statistics for civil and environmental engineers

    CERN Document Server

    Kottegoda, N T

    2009-01-01

    Civil and environmental engineers need an understanding of mathematical statistics and probability theory to deal with the variability that affects engineers'' structures, soil pressures, river flows and the like. Students, too, need to get to grips with these rather difficult concepts.This book, written by engineers for engineers, tackles the subject in a clear, up-to-date manner using a process-orientated approach. It introduces the subjects of mathematical statistics and probability theory, and then addresses model estimation and testing, regression and multivariate methods, analysis of extreme events, simulation techniques, risk and reliability, and economic decision making.325 examples and case studies from European and American practice are included and each chapter features realistic problems to be solved.For the second edition new sections have been added on Monte Carlo Markov chain modeling with details of practical Gibbs sampling, sensitivity analysis and aleatory and epistemic uncertainties, and co...

  2. Vibrational Based Inspection of Civil Engineering Structures

    DEFF Research Database (Denmark)

    Rytter, Anders

    University of Aalborg from 1988 to 1991. Secondly, a research project, In-Field Vibration Based Inspection of Civil Engineering Structures, which has been performed as a pilot project by the Consulting Engineers Rambøll, Hannemann and Højlund in cooperation with the department of Building Technology and......The thesis has been written in relation to two different research projects. Firstly, an offshore test programme, Integrated Experimental/Numerical Analysis of the Dynamic behavior of offshore structures, which was performed at the department of Building Technology and Structural Engineering at the...... Structural Engineering at the University of Aalborg since the beginning of 1992. Both projects have been supported by the Danish Technical Research Council. Further, the first mentioned project was supported by the Danish Energy Agency. Their financial support is gratefully acknowledged....

  3. 浅析土建工程设计概算的编制与审查要点%Discussion on the Points of Establishment and Audit of Budgetary Estimate of Civil Engineering

    Institute of Scientific and Technical Information of China (English)

    吴春玲

    2014-01-01

    土建工程的设计概算作为控制建设投资的重要依据,对设计方案是否具有经济性、合理性、可行性进行考核来说有重要意义。本文主要介绍了土建工程设计概算编制的科学依据与方法,指出了设计概算审核中需要注意的重点问题,为保证设计概算质量提出了建设性意见。%Budget for the design of civil engineering, as an important basis for the control of construction investment, is important for the economic, rational, feasible assessment of design scheme. This paper mainly introduces the scientific ba-sis and method of design budget estimate of civil engineering;points out the key problems need to be paid at ention to in the design of budget audit, put ing forward constructive sugges-tions to ensure the quality of design budget estimate.

  4. Metaheuristics and optimization in civil engineering

    CERN Document Server

    Bekdaş, Gebrail; Nigdeli, Sinan

    2016-01-01

    This timely book deals with a current topic, i.e. the applications of metaheuristic algorithms, with a primary focus on optimization problems in civil engineering. The first chapter offers a concise overview of different kinds of metaheuristic algorithms, explaining their advantages in solving complex engineering problems that cannot be effectively tackled by traditional methods, and citing the most important works for further reading. The remaining chapters report on advanced studies on the applications of certain metaheuristic algorithms to specific engineering problems. Genetic algorithm, bat algorithm, cuckoo search, harmony search and simulated annealing are just some of the methods presented and discussed step by step in real-application contexts, in which they are often used in combination with each other. Thanks to its synthetic yet meticulous and practice-oriented approach, the book is a perfect guide for graduate students, researchers and professionals willing to applying metaheuristic algorithms in...

  5. IMPORTANCE OF GEOTECHNICS IN TODAY'S AND FUTURE CIVIL ENGINEERING - Public image, risks and responsibilities and future aspects of civil/geotechnical engineering

    OpenAIRE

    Brandl, Heinz

    2011-01-01

    This contribution is dedicated to the public image of the civil engineer and geotechnical engineer, respectively, seen from an ethical and philosophical point of view. Discrepancies between professional opinions, the gap between theory and practice, pros and cons of codes or regulations, and the lifelong learning society are discussed on the basis of the author's nearly fifty years of comprehensive professional experience. Furthermore, the environmental challenge to civil/geotechnical enginee...

  6. Active IR-applications in civil engineering

    Science.gov (United States)

    Wiggenhauser, H.

    2002-06-01

    Applications of IR-thermography in civil engineering are not limited to the identification of heat losses in building envelopes. As it is well known from other areas of non-destructive testing, active IR-thermographic methods such as cooling down or lock-in thermography improves the results in many investigations. In civil engineering these techniques have not been used widely. Mostly thermography is used in a quasi-static manner. The interpretation of moisture measurements with thermography on surfaces can be very difficult due to several overlapping effects: emissivity changes due to composition, heat transfer through wet sections of the specimen, cooling through air flow or reflected spurious radiation sources. These effects can be reduced by selectively measuring the reflection in two wavelength windows, one on an absorption band of water and another in a reference band and then combining the results in a moisture index image. Cooling down thermography can be used to identify subsurface structural deficiencies. For building materials like concrete these measurements are performed on a much longer time scale than in flash lamp experiments. A quantitative analysis of the full cooling down process over several minutes can reliably identify defects at different depths. Experiments at BAM have shown, that active thermography is capabale of identifying structural deficiencies or moist areas in building materials much more reliable than quasi-static thermography.

  7. CDIO Projects in Civil Engineering Study Program at DTU

    DEFF Research Database (Denmark)

    Krogsbøll, Anette; Simonsen, Claus; Christensen, Jørgen Erik;

    2011-01-01

    design build project on each of the first four semesters. In this paper the four projects in the civil engineering study program are described along with a brief description of the entire study program. The aim is to provide additional information and documentation to accompany an exposition where......In 2008 all Bachelor of engineering study programs at the Technical University of Denmark (DTU) have been adopted to the “Conceive – Design – Implement – Operate” approach. As part of the necessary changes it was decided that all seven study programs should have a cross disciplinary project or a...... students present their projects. Learning outcomes, training and assessment of personal, professional and social engineering skills are described from a project point of view. Progression of engineering skills is discussed from a study program perspective. The interrelation between the various elements to...

  8. Consolidation on civil engineering and technical infrastructure

    CERN Document Server

    Alves, P; Pepinster, P; van Baaren, W; CERN. Geneva. ST Division

    2003-01-01

    The use and age of the civil engineering structure (office buildings, halls, tunnels) and of tertiary technical equipment (mainly HVAC and electricity) at CERN is such that their renovation must be considered in the near future. Due to the large number of buildings and equipment in these conditions, and the restricted budget available it is extremely important to define priorities. The aim of this paper is to give an overview of the current conditions and the related problems, based on data analysis of CERN database and confronting it with the inventory made at CERN by an external company. After having identified the most frequent problems and repairs to carry out, a planning for intervention is therefore presented optimizing the safety aspects, maintenance costs and comfort for the users. The timescale of this intervention is related to the money that will be available in the coming years.

  9. Civil engineering applications of ground penetrating radar

    CERN Document Server

    Pajewski, Lara

    2015-01-01

    This book, based on Transport and Urban Development COST Action TU1208, presents the most advanced applications of ground penetrating radar (GPR) in a civil engineering context, with documentation of instrumentation, methods, and results. It explains clearly how GPR can be employed for the surveying of critical transport infrastructure, such as roads, pavements, bridges, and tunnels, and for the sensing and mapping of underground utilities and voids. Detailed attention is also devoted to use of GPR in the inspection of geological structures and of construction materials and structures, including reinforced concrete, steel reinforcing bars, and pre/post-tensioned stressing ducts. Advanced methods for solution of electromagnetic scattering problems and new data processing techniques are also presented. Readers will come to appreciate that GPR is a safe, advanced, nondestructive, and noninvasive imaging technique that can be effectively used for the inspection of composite structures and the performance of diagn...

  10. Structural Control Systems Implemented in Civil Engineering

    Directory of Open Access Journals (Sweden)

    Cristian Pastia

    2005-01-01

    Full Text Available Over the past three decades, a great interest has been generated by the use of protection systems to mitigate the effects of dynamic environmental hazards on civil engineering structures, such as earthquakes and strong wind. These control systems develop controllable forces to add or dissipate energy in a structure, or both, due to specific devices integrated with sensors, controllers and real – time process to operate. The paper includes the advantages of these technologies consisting of the following sections: 1 represents an introduction, 2 deals with passive control system, 3 regards some control techniques, 4 concerns hybrid control techniques, 5 contains semi – active control techniques, and 6 is dedicated to general conclusions.

  11. Civil Engineering Construction of Underground Works

    CERN Document Server

    Rammer, H

    1999-01-01

    For the first time at CERN, new shafts and caverns will be excavated inside a surface building. The LHC civil engineering construction for the ATLAS experiment has been designed such that the experimental hall will be completed to the extent that it can provide a secure, weatherproof and sound insulated covering to the shaft excavation area. The construction of the two access shafts and the experimental cavern will follow and will be carried out inside the building. This unconventional method of working allows the excavation of the Molasse rock in the dry, which is essential for this type of rock, and ensures reduced environmental pollution by noise and dust. The paper will present the technical infrastructure required for this particular construction method, explain its advantages and disadvantages, and compare it with a conventional method of underground excavations to be used on the same work site for the construction of the service cavern.

  12. Civil engineering for a Japanese supercollider

    International Nuclear Information System (INIS)

    The civil engineering aspect of the construction of an accelerator complex of a hadron collider with the beam energy larger than 30TeV was studied. The collider will consist of about 10,000 superconducting magnets accommodated in an underground tunnel of diameter as large as 30km. The complex has a booster with a beam energy of one TeV. One of the possible places for the construction of the accelerator complex will be the area of Abukuma district in Fukushima Prefecture. The construction cost of the tunnel was estimated by experts to be about 90 billion yen including the approach roads. This is only three times as much as the cost of the TRISTAN tunnel whose length is about 3km. This cost is consistent with the estimated cost of the LEP tunnel. It was also estimated that the construction can be finished in four years. (Aoki, K.)

  13. M.Sc. in Civil and Structural Engineering

    DEFF Research Database (Denmark)

    The following pages contain a list of project ideas proposed by the scientific staff at the Department of Civil Engineering, Aalborg University, and a number of companies. Most of the project ideas in this catalogue may form the basis for long and short master projects as well as regular 3rd...... semester projects at the M.Sc. programme in Civil and Structural Engineering....

  14. Structural and Topology Optimization of Complex Civil Engineering Structures

    DEFF Research Database (Denmark)

    Hald, Frederik; Kirkegaard, Poul Henning; Andersen, Lars Vabbersgaard

    2013-01-01

    This paper shows the use of topology optimization for finding an optimized form for civil engineering structures. Today topology optimization and shape optimization have been integrated in several commercial finite element codes. Here, the topology of two complex civil engineering structures will...

  15. M.Sc. in Civil and Structural Engineering

    DEFF Research Database (Denmark)

    The catalogue contain a list of project ideas proposed by the scientific staff at the Department of Civil Engineering, Aalborg University, and a number of companies. Most of the project ideas in this catalogue may form the basis for long and short candidate projects as well as regular 3rd semester...... projects at the M.Sc. programme in Civil and Structural Engineering....

  16. M.Sc. in Civil and Structural Engineering

    DEFF Research Database (Denmark)

    Clausen, Johan

    The report contain a list of project ideas proposed by the scientific staff at the Department of Civil Engineering, Aalborg University, and a number of companies. Most of the project ideas in this catalogue may form the basis for long and short candidate projects as well as regular 3rd semester...... projects at the M.Sc. programme in Civil and Structural Engineering....

  17. M.Sc. in Civil and Structural Engineering

    DEFF Research Database (Denmark)

    This catalogue contains a list of project ideas proposed by the scientific staff at the Department of Civil Engineering, Aalborg University, and a number of companies. Most of the project ideas in this catalogue may form the basis for long and short candidate projects as well as regular 3rd...... semester projects at the M.Sc. programme in Civil and Structural Engineering....

  18. Civil engineering status report for the CMS worksite

    CERN Document Server

    Osborne, J

    2004-01-01

    Civil engineering construction started at Point 5 in 1998 using a contract based upon the standard FIDIC model (Fédération Internationale des Ingénieurs Conseils). The new surface buildings and underground structures are necessary to accommodate the CMS detector for the LHC Project. The principal underground works at Point 5 consist of two new shafts, two caverns along with a number of small connection tunnels and galleries. At Point 5, the works are now 90% complete. Three surface buildings are due to be completed in 2004, namely the SX extension over the PX56 shaft, including the "Bouchon", and also the SCX and SDX buildings. Underground, the USC55 cavern secondary lining is now complete and the UXC55 cavern lining due for completion in the summer of 2004. The aim of this paper is to present the status of the civil engineering on this worksite and in particular the challenges encountered during construction and experience gained using a FIDIC based contract.

  19. Geotechnical information as an important element when planning and designing civil engineering work Bogotá

    OpenAIRE

    Denisse Cangrejo Aljure; Carlos Gustavo Infante

    2010-01-01

    The city of Bogota provides a dynamic scenario re civil construction work; it is thereby essential to have relevant information available for the suitable planning and evaluation of engineering work from both the structural and budgetary points of view. The moisture content of soil has become a most important variable, given its great impact on placing structures in Bogota. This is why this work on city zoning aimed at orientating planning and designing civil engineering work has been done a...

  20. Advances in Structural Control in Civil Engineering in China

    Directory of Open Access Journals (Sweden)

    Hongnan Li

    2010-01-01

    Full Text Available In the recent years, much attention has been paid to the research and development of structural control techniques with particular emphasis on alleviation of wind and seismic responses of buildings and bridges in China. Structural control in civil engineering has been developed from the concept into a workable technology and applied into practical engineering structures. The aim of this paper is to review a state of the art of researches and applications of structural control in civil engineering in China. It includes the passive control, active control, hybrid controland semiactive control. Finally, the possible future directions of structural control in civil engineering in China are presented.

  1. Ageing in civil engineering materials and structures

    International Nuclear Information System (INIS)

    SETEC TPI will address the 'Aging' topic of the Dijon Symposium by talking about: aging in civil engineering materials and structures, prevention of aging phenomena, in-operation monitoring of degradations related to aging and compensatory measures required to maintain a good safety level. Works as the Millau viaduct, the EdF skyscraper at La Defense - Paris, the renovation of the Grand Palais of Paris and special structures with Monaco's floating dam as well as the 'number 10' shaped gateway boat at Marseilles are illustrations for the issues discussed. The durability of civil engineering structures has become a major concern for designers. The Millau viaduct is designed for a service life of 120 years, and the Monaco dam for 100 years. Calculation rules have been evolving toward the incorporation of the concept of life cycle, for example, the Eurocodes 2 rules (reinforced concrete). The talk will expose the factors which are being taken into account to delay aging versus structure types. This part will be focused towards materials and corresponding regulations: - Reinforced concrete (coating of reinforcements, opening of cracks, choice of reinforcement types), BAEL and Eurocodes 2 rules; - Frame steel (protection, sacrificial anode), CM66 and Eurocodes 3 rules. New materials will also be mentioned: - Ultra high-performance fiber/concrete, with the example of CERACEM applied at Millau for the covering of the toll area barrier; - Titanium, which is starting to appear in the building trades, as for instance for the Beijing China Opera House shell. The second part of the talk will be devoted to a specific case namely, the 'number 10' shaped gateway bridge, a prestressed concrete structure immersed in the Port of Marseilles, which will be used to illustrate the aging phenomenon in a corrosive environment. We will focus on the types of inspection series performed by the Autonomous Port Authority of Marseilles to check the behavior of its structure and the repair series

  2. ATLAS Civil Engineering at Point 1

    CERN Multimedia

    2002-01-01

    Views of ATLAS cavern under the construction, many views also from the Pit where all the parts and machines will be lowered in the future. This film includes views that are taken partly from the tunnel side also. Please note that the video is partly in form of seguence pictures on photo style.

  3. Civil engineering: EDF needs for concrete modelling

    International Nuclear Information System (INIS)

    Concrete structures which are encountered at EDF, like all civil engineering structures, age. In order to adapt the maintenance conditions of these structures, particularly to extend their service life, and also to prepare constructions of future structures, tools for predicting the behaviour of these structures in their environment should be available. For EDF the technical risks are high and consequently very appropriate R and D actions are required. In this context the Direction des Etudes et Recherches (DER) has developed a methodology for analysing concrete structure behaviour modelling. This approach has several aims: - making a distinction between the problems which refer to the existing models and those which require R and D; - displaying disciplinary links between different problems encountered on EDF structures (non-linear mechanical, chemical - hydraulic - mechanical coupling, etc); - listing of the existing tools and positioning the DER 'Aster' finite element code among them. This document is a state of the art of scientific knowledge intended to shed light on the fields in which one should be involved when there is, on one part a strong requirement on the side of structure operators, and on the other one, the present tools do not allow this requirement to be satisfactorily met. The analysis has been done on 12 scientific subjects: 1) Hydration of concrete at early ages: exothermicity, hardening, autogenous shrinkage; 2) Drying and drying shrinkage; 3) Alkali-silica reaction and bulky stage formation; 4) Long term deterioration by leaching; 5) Ionic diffusion and associated attacks: the chlorides case; 6) Permeability / tightness of concrete; 7) Concretes -nonlinear behaviour and cracking (I): contribution of the plasticity models; 8) Concretes - nonlinear behaviour and cracking (II): contribution of the damage models; 9) Concretes - nonlinear behaviour and cracking (III): the contribution of the probabilistic analysis model; 10) Delayed behaviour of

  4. Modelling of Electrokinetic Processes in Civil and Environmental Engineering Applications

    DEFF Research Database (Denmark)

    Paz-Garcia, Juan Manuel; Johannesson, Björn; Ottosen, Lisbeth M.;

    2011-01-01

    A mathematical model for the electrokinetic phenomena is described. Numerical simulations of different applications of electrokinetic techniques to the fields of civil and environmental engineering are included, showing the versatility and consistency of the model. The electrokinetics phenomena c...

  5. Sam Easterling to lead civil and environmental engineering department

    OpenAIRE

    Nystrom, Lynn A.

    2009-01-01

    W. Samuel Easterling, the Montague-Betts Professor of Structural Steel Design in Virginia Tech's Charles E. Via Jr. Department of Civil and Environmental Engineering, will become the department head effective Aug. 10, 2009.

  6. Review for dynamic researches in civil engineering in recent years

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Structure dynamic research is a hot field in civil engineering.It involves in many challenge topics,such as dynamic analysis and tests under earthquake,wind or other dynamic excitations.This paper introduces main dynamic researches in civil engineering in recent years,which will be classified into five aspects,especially for researches published in Science in China Series E:Technological Sciences.

  7. Advances in Structural Control in Civil Engineering in China

    OpenAIRE

    Hongnan Li; Linsheng Huo

    2010-01-01

    In the recent years, much attention has been paid to the research and development of structural control techniques with particular emphasis on alleviation of wind and seismic responses of buildings and bridges in China. Structural control in civil engineering has been developed from the concept into a workable technology and applied into practical engineering structures. The aim of this paper is to review a state of the art of researches and applications of structural control in civil enginee...

  8. Morphological Characteristics of the Language used in Civil Engineering

    OpenAIRE

    Liliana RICINSCHI

    2014-01-01

    This paper aims at investigating the particular features of civil engineering written discourse. A first assumption is made that the language employed in civil engineering is a subcategory of English for Specific Purposes. As part of ESP, it is thus bound to have a set of specialized lexical and grammatical features which are not in the repertoire of the non-users of that particular domain: complex noun phrases, special use of articles, special use of modal verbs, frequency of the passive voi...

  9. Clients' perspectives of professional ethics for civil engineers

    OpenAIRE

    H Abdul-Rahman; Wang, C.; M A Saimon

    2011-01-01

    Many parties in the construction industry claim that codes of professional ethics can help mitigate the unethical conduct of civil engineers and improve the ethical level amongst construction players. However, the fact is, even though most organisations have their own codes of ethics, there still are many instances of unethical conduct in the construction industry. For this reason, this research attempted to study clients' perceptions of the impact on civil engineering works that codes of pro...

  10. CER: A Handy Tool for the Civil Engineer

    OpenAIRE

    Klein, Helena

    1998-01-01

    Because of the dynamic developments in information technology, the role of the libraries is also changing dramatically. Access to electronic resources, as a service, has become more common for all those working in libraries. This paper focuses on the Civil Engineering Resources (CER), an electronic resource service available on the World Wide Web. It was developed within the library of Civil Engineering at Lund Institute of Technology, compiling about 500 selected Internet Resour...

  11. Mechanical Modelling and Computational Issues in Civil Engineering

    OpenAIRE

    Fremond, M.; MACERI, F

    2005-01-01

    In this edited book various novel approaches to problems of modern civil engineering are demonstrated. Experts associated within the Lagrange Laboratory present recent research results in civil engineering dealing both with modelling and computational aspects. Many modern topics are covered, such as monumental dams, soil mechanics and geotechnics, granular media, contact and friction problems, damage and fracture, new structural materials, and vibration damping -presenting the state of the ar...

  12. Pluridisciplinarity vs. interdisciplinarity in civil engineering education in seismic areas

    Directory of Open Access Journals (Sweden)

    Emil-Sever GEORGESCU

    2012-12-01

    Full Text Available Civil engineers are involved in building and maintaining a built environment that meets the sustainable development requirements. This environment is interdisciplinary in its nature, as it results from an interaction between different actors (architects, city planners, authorities, clients, civil engineers. Professional formation and training of engineers is a result of the didactic and technical efforts, which later will be reflected in the way constructions are being designed and built, so that engineers are not considered simple workers. Thus, when discussing professional formation and training of engineers, one should debate the necessary steps they have to take in their relationship with other disciplines. Practicing civil engineering in seismic risk areas in Romania adds specific requirements.

  13. Applications of Statistics and Probability in Civil Engineering

    DEFF Research Database (Denmark)

    Faber, Michael Havbro

    contains the proceedings of the 11th International Conference on Applications of Statistics and Probability in Civil Engineering (ICASP11, Zürich, Switzerland, 1-4 August 2011). The book focuses not only on the more traditional technical issues, but also emphasizes the societal context of the...... and reliability in engineering; to professionals and engineers, including insurance and consulting companies working with natural hazards, design, operation and maintenance of civil engineering and industrial facilities; and to decision makers and professionals in the public sector, including...

  14. Proposal for the increase of the contract amounts for LHC civil engineering construction and civil engineering consultancy contracts

    CERN Document Server

    2001-01-01

    This document concerns the increase of the contract amounts for LHC civil engineering construction contracts and civil engineering consultancy contracts. The Finance Committee is invited to agree to the increase of the contract amounts with: - the joint venture TEERAG-ASDAG (AT), C. BARESEL (DE) and LOCHER (CH) for civil engineering construction, package 1, for a revised total amount of 91 500 000 Swiss francs, subject to revision; - the joint venture EDF (FR) and KNIGHT&PIESOLD (GB) for the provision of civil engineering consultancy services, package 1, for a revised total amount of 14 400 000 Swiss francs, subject to revision; - the joint venture TAYLOR WOODROW (GB), AMEC (GB) and SPIE BATIGNOLLES (FR) for civil engineering construction, package 3a, for a revised total amount of 118 000 000 Swiss francs, subject to revision; - the joint venture BROWN&ROOT (GB), INTECSA (ES) and HIDROTECNICA (PT) for the provision of civil engineering consultancy services, package 3, for a revised total amount of 14 ...

  15. Ecological aspects in civil engineering and physical planning

    International Nuclear Information System (INIS)

    This book presents an introduction to aspects of ecology and has been quite purposefully restricted to the aspects of interest in connection with civil engineering and physical planning. The various chapters deal with soil, water bodies, air, plants and plant communities, trees in towns, animal life, noise and health, as well as high-energy radiation and its impact on man and environment. The book is intended to make engineers and other interested readers working in the technical professions familiar with ecologic principles and ecologically minded thinking in order to pave the way for ecology-mindedness in civil engineering and physical planning, hopefully contributing to avoiding mistakes and their harmful consequences. (orig.)

  16. Compressor Study to Meet Large Civil Tilt Rotor Engine Requirements

    Science.gov (United States)

    Veres, Joseph P.

    2009-01-01

    A vehicle concept study has been made to meet the requirements of the Large Civil Tilt Rotorcraft vehicle mission. A vehicle concept was determined, and a notional turboshaft engine system study was conducted. The engine study defined requirements for the major engine components, including the compressor. The compressor design-point goal was to deliver a pressure ratio of 31:1 at an inlet weight flow of 28.4 lbm/sec. To perform a conceptual design of two potential compressor configurations to meet the design requirement, a mean-line compressor flow analysis and design code were used. The first configuration is an eight-stage axial compressor. Some challenges of the all-axial compressor are the small blade spans of the rear-block stages being 0.28 in., resulting in the last-stage blade tip clearance-to-span ratio of 2.4 percent. The second configuration is a seven-stage axial compressor, with a centrifugal stage having a 0.28-in. impeller-exit blade span. The compressors conceptual designs helped estimate the flow path dimensions, rotor leading and trailing edge blade angles, flow conditions, and velocity triangles for each stage.

  17. Materials for construction and civil engineering science, processing, and design

    CERN Document Server

    Margarido, Fernanda

    2015-01-01

    This expansive volume presents the essential topics related to construction materials composition and their practical application in structures and civil installations. The book's diverse slate of expert authors assemble invaluable case examples and performance data on the most important groups of materials used in construction, highlighting aspects such as nomenclature, the properties, the manufacturing processes, the selection criteria, the products/applications, the life cycle and recyclability, and the normalization. Civil Engineering Materials: Science, Processing, and Design is ideal for practicing architects; civil, construction, and structural engineers, and serves as a comprehensive reference for students of these disciplines. This book also: ·       Provides a substantial and detailed overview of traditional materials used in structures and civil infrastructure ·       Discusses properties of natural and synthetic materials in construction and materials' manufacturing processes ·  �...

  18. International Civil and Infrastructure Engineering Conference 2014

    CERN Document Server

    Yusoff, Marina; Alisibramulisi, Anizahyati; Amin, Norliyati; Ismail, Zulhabri

    2015-01-01

    The special focus of this proceedings is to cover the areas of infrastructure engineering and sustainability management. The state-of-the art information in infrastructure and sustainable issues in engineering covers earthquake, bioremediation, synergistic management, timber engineering, flood management and intelligent transport systems. It provides precise information with regards to innovative research development in construction materials and structures in addition to a compilation of interdisciplinary finding combining nano-materials and engineering.

  19. International Civil and Infrastructure Engineering Conference 2013

    CERN Document Server

    Yusoff, Marina; Ismail, Zulhabri; Amin, Norliyati; Fadzil, Mohd

    2014-01-01

    The special focus of this proceedings is to cover the areas of infrastructure engineering and sustainability management. The state-of-the art information in infrastructure and sustainable issues in engineering covers earthquake, bioremediation, synergistic management, timber engineering, flood management and intelligent transport systems. It provides precise information with regards to innovative research development in construction materials and structures in addition to a compilation of interdisciplinary finding combining nano-materials and engineering.

  20. Use of Statistical Information for Damage Assessment of Civil Engineering Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Andersen, P.

    This paper considers the problem of damage assessment of civil engineering structures using statistical information. The aim of the paper is to review how researchers recently have tried to solve the problem. It is pointed out that the problem consists of not only how to use the statistical...

  1. Usage of dynamic plans in civil engineering of Serbia

    Directory of Open Access Journals (Sweden)

    Zlatanović Milorad

    2011-01-01

    Full Text Available For a successful realization of a civil engineering project, it is necessary to possess good quality dynamic plans of construction works and of resource involvement. Depending on the type and size of the structure, appropriate type of dynamic plan ought to be used. The plan realization must constantly be observed and updated in order to ensure their full effectiveness. This paper presents the results of a research through a survey of dynamic plan implementation in our civil engineering practice. The results are based on the data processed from the responses to the questions asked in the survey of 45 construction enterprises in Serbia.

  2. Situated learning methodologies and assessment in civil engineering structures education

    Science.gov (United States)

    Bertz, Michael Davis

    This thesis describes an overarching study of civil engineering undergraduate structural education through student performance in recalling and applying basic structural engineering knowledge, and the viability of alternative situated learning environments for more effectively supporting the learning of this knowledge. To properly ground this study, a thorough investigation of related work in assessment, cognitive science, educational technology, and design education was completed, with connections and applications to civil engineering education highlighted. The experimental work of the thesis is organized into three parts: an assessment of civil engineering undergraduates' fundamental structural engineering knowledge and abilities; the development and testing of a software support environment for situated learning, the Civil Engineering Learning Library (CELL); and, the implementation and evaluation of the design studio, a pedagogical model for situated learning in the classroom. The results of the assessment study indicate that civil engineering seniors (and also students earlier in the curriculum) have difficulty retaining and applying basic knowledge of structural behavior, especially doing so in a flexible fashion in design situations. The survey also suggests that visualization plays an important role in understanding structural behavior. Tests with the CELL system show that a cognitively-flexible multimedia environment can support structural learning, but were inconclusive about whether the computer-based system helped the students to learn better than conventional classroom lecture. Two trial implementations of the design studio indicate that the studio model can serve as a powerful situated learning environment, and that it can be scaled up to reasonable class sizes. Significant requirements are associated with this model, however, primarily in faculty involvement, but also in physical resources and student time. In addition to these conclusions about the

  3. The potential of biobased materials in the civil engineering sector

    OpenAIRE

    Venema, Anne

    2012-01-01

    SUMMARY Large quantities of materials are used in the Dutch civil engineering sector every year. Many of these materials have a significant impact on the environment because these materials are based on non-renewable resources and the production is often

  4. Identification & Control of Special Processes in Civil Engineering Construction

    Institute of Scientific and Technical Information of China (English)

    张怡

    2009-01-01

    @@ A lot ot special processes exist in operation of construction enterprises. Construction enterprises are categorized as of high risks in certification under the quality management system. Taking civil engineering construction of building projects as an example, the writer analyzes how construction enterprises shall identify and control the special processes.

  5. IEMAE: mathematics & statistics applied to civil engineering & building

    OpenAIRE

    Serrat Piè, Carles

    2009-01-01

    IEMAE (Institut d’Estadística i Matemàtica Aplicada a l’Edificació - Institute of Statistics and Mathematics Applied to the Building Construction) is an academic institution interested in solving Multidisciplinary problems in the civil and building engineering area by using statistics and mathematics disciplines

  6. Automated Modal Parameter Estimation of Civil Engineering Structures

    OpenAIRE

    Andersen, Palle; Brincker, Rune; Goursat, Maurice; Mevel, Laurent

    2007-01-01

    In this paper the problems of doing automatic modal parameter extraction of ambient excited civil engineering structures is considered. Two different approaches for obtaining the modal parameters automatically are presented: The Frequency Domain Decomposition (FDD) technique and a correlation-driven Stochastic Subspace Identification (SSI) technique. Finally, the techniques are demonstrated on real data

  7. Automated Modal Parameter Estimation of Civil Engineering Structures

    DEFF Research Database (Denmark)

    Andersen, Palle; Brincker, Rune; Goursat, Maurice;

    In this paper the problems of doing automatic modal parameter extraction of ambient excited civil engineering structures is considered. Two different approaches for obtaining the modal parameters automatically are presented: The Frequency Domain Decomposition (FDD) technique and a correlation-dri......-driven Stochastic Subspace Identification (SSI) technique. Finally, the techniques are demonstrated on real data...

  8. Evolutionary algorithms and metaheuristics in civil engineering and Construction management

    CERN Document Server

    Greiner, David

    2015-01-01

    This book focuses on civil and structural engineering and construction management applications. The contributions constitute modified, extended and improved versions of research presented at the  minisymposium organized by the editors at the ECCOMAS conference on this topic in Barcelona 2014.

  9. Developing Research Skills for Civil Engineers: A Library Contribution.

    Science.gov (United States)

    Bruce, C. S.; Brameld, G. H.

    1990-01-01

    A library instruction program has been instituted in civil engineering at the Queensland University of Technology (Australia) in an effort to improve the research skills of fourth year students working on research projects. Students with extended library instruction were found to have better information-seeking behavior than others. (Author/MSE)

  10. State Space identification of Civil Engineering Structures from Output Measurements

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Andersen, P.

    1997-01-01

    identification of civil engineering structures. The SST is compared with the stochastic realization estimator Matrix Block Hankel (MBH) and a prediction error method (PEM). The results show that the investigated techniques give good results in terms of estimated modal parameters and mode shapes. Especially, it...

  11. State Space identification of Civil Engineering Structures from Output Measurements

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Andersen, P.

    identification of civil engineering structures. The SST is compared with the stochastic realization estimator Matrix Block Hankel (MBH) and a prediction error method (PEM). The results show that the investigated techniques give good results in terms of estimated modal parameters and mode shapes. Especially, it...

  12. Construction Site Environmental Impact in Civil Engineering Education

    Science.gov (United States)

    Teixeira, Jose M. Cardoso

    2005-01-01

    The environmental impact of construction activity has gained increasing importance in the last few years and become a key subject for civil engineering education. A survey of Portuguese higher education institutions shows that concern with this topic is mostly directed at the impact of large construction projects and especially focused on their…

  13. Predicaments and Expectations of Civil Engineering Education in China.

    Science.gov (United States)

    Liu, Xila; Fang, Dongping

    2002-01-01

    Explains the goals of civil engineering in China which include integrated knowledge structure and multi-level knowledge and abilities of innovation, adaptation, cooperation, communication, and organization. Discusses the challenges of student-centered education, dynamics of education organization, and open education. (Author/YDS)

  14. Civil Engineering Knowledge, Sellafield, United Kingdom

    International Nuclear Information System (INIS)

    As part of the preparation for decommissioning pond facilities, it will be necessary to thoroughly review the extent of available engineering information and to assess whether this is likely to be adequate to support the anticipated projects and safety assessments. A structured approach to this will allow a gap analysis to be undertaken and to identify areas requiring early efforts. For ageing facilities, it should be anticipated that efforts will be required to restore plant engineering records and undertake assessments of ageing and degradation effects on key structural and containment systems and components. During the preparation of programme and project schedules, allowance should be made for these activities

  15. Severity estimation and shop visit prediction of civil aircraft engines

    OpenAIRE

    Hanumanthan, Hariharan

    2009-01-01

    To sustain in the vibrant field of civil aviation, the aircraft and engine manufacturers are in the pursuit of delivering efficient systems with the best economics. In umpteen scenarios of growing interest, engine maintenance cost due to scheduled maintenance is of importance. The current research is focused on estimation of the maintenance factors, such as severity and shop visit rate to study the operational scenarios and concurrent technologies. The severity, defined as r...

  16. The Challenges of LHC Civil Engineering

    CERN Multimedia

    CERN-ETT-EC-MM Team

    2003-01-01

    A mosaic of works, structures and workers of differents crafts and origins. Three consulting consortia for the engineering and the follow-up of the works. Four industrial consortia for doing the job. A young team of 25 CERN staff, 30 surface buildings, 32 caverns of all sizes, 170 000 m3 of concrete, 420 000 m3 excavated.1998-2004 : six years of work and 340 millions Swiss Francs.

  17. Civil Engineering in the ATLAS cavern

    CERN Multimedia

    Laurent Guiraud

    2000-01-01

    Ghostly figures can be seen wandering the cavern that will eventually house the ATLAS experiment, part of the LHC at CERN. Quite fitting since the detector will hunt the illusive 'ghostly' particles, such as the Higgs boson and dark matter. These engineers are excavating the huge cavern that has to be anchored from above as the detector will fill so much space that there is no room for support pillars.

  18. Importance of Nanotechnology in Civil Engineering

    OpenAIRE

    Kaizar Hossain; Shaik Rameeja

    2015-01-01

    Nanotechnology is an extremely wide term, the definition of which varies from field to field. Most commonly, nanotechnology is defined as “…the understanding, control, and restructuring of matter on the order of nanometers (i.e., less than 100 nm) to create materials with fundamentally new properties and functions” [1]. Nanotechnology refers to the manipulation of individual atoms and molecules, by engineering matter at the atomic level.  At the nanoscale, familiar materials can have dramatic...

  19. Increase of the contract amounts for LHC civil-engineering construction and civil-engineering consultancy contracts

    CERN Document Server

    2005-01-01

    This document concerns the increase of the contract amounts for LHC civil-engineering construction and civil-engineering consultancy, Package 2. The Finance Committee is invited to take note of the increase of the contract amounts with: - the joint venture DRAGADOS (ES) and SELI (IT) for civil-engineering construction, LHC Package 2, for an amount of 28 087 000 Swiss francs, subject to revision, in the amount previously announced to Finance Committee (CERN/FC/4516) of 132 200 000 Swiss francs, subject to revision, bringing the total to a maximum amount of 160 287 000 Swiss francs, subject to revision. - the joint venture GIBB (GB), GEOCONSULT (AT) and SGI (CH) for the provision of civil-engineering consultancy services, LHC Package 2, for an amount of 900 000 Swiss francs, subject to revision, in the amount previously announced to Finance Committee of 13 800 000 Swiss francs, subject to revision, bringing the total to a maximum amount of 14 700 000 Swiss francs, subject to revision

  20. FOREWORD: Cultural heritage and civil engineering Cultural heritage and civil engineering

    Science.gov (United States)

    Masini, Nicola; Soldovieri, Francesco; Alvarez de Buergo, Monica; Dumoulin, Jean

    2012-08-01

    This special issue of Journal of Geophysics and Engineering offers a diverse panorama of approaches and technologies that aim to characterize and analyse the state of conservation and health of cultural heritage and civil infrastructure. In particular, it provides a significant overview not only of the effectiveness but also of the limitations of single diagnostic techniques, which can be overcome through the integration of different methods and technologies and/or the use of robust and novel data processing techniques. The choice of diagnostic strategy depends on the material (concrete, masonry), the spatial characteristics of the objects or sites, the value of the objects to be investigated (cultural or not), the aim of the investigation (knowledge, conservation, restoration) and the issues to be addressed (monitoring, decay assessment, etc). The paper by Fornaro et al reports an important technological advance in the field of slow deformation monitoring of civil infrastructure by means of differential interferometric synthetic aperture radar (SAR) from satellite platforms. The paper shows how the joint exploitation of the last generation of X-band SAR sensors, such as TerraSAR-X, and novel tomographic approaches makes possible advanced multi-dimensional imaging of real structures such as the Las Vegas Monorail. Within the same SAR-based applications, Tapete et al tested the capability of persistent scatterer interferometry (PSI) techniques in the preventative diagnosis of deformation threatening the structural stability of archaeological monuments and buried structures in the Roman Forum, Palatino Hill and Oppio Hill in the centre of Rome. A PSInSAR processing approach, based on the use of the SqueeSAR algorithm, has been shown to be highly suitable for retrieving not only information about displacements of the archaeological remains, but also evidence of criticalities affecting partially or totally buried structures, such as those discovered at Nero's Golden

  1. Studying civil engineering alumni from a Mexican university

    Directory of Open Access Journals (Sweden)

    Rómel G Solís Carcaño

    2010-04-01

    Full Text Available The present study was aimed at knowing the opinion of graduates from a Mexican university’s Civil Engineering department about several aspects related to their first years as professionals. The study explored aspects such as graduation index, the difficulty of inserting themselves into the labour market, their opinion about the civil engi- neering programme and their interest in continuing their studies. A questionnaire was prepared for gathering the information based on various international, national and local criteria. The results revealed that the graduates had experienced little difficulty in becoming inserting into the local labour market; however, their professional performance had not been as satisfactory as they had expected.

  2. M.Sc. in Civil and Structural Engineering

    DEFF Research Database (Denmark)

    Clausen, Johan Christian

    The following pages contain a list of project ideas proposed by the scientific staff at the Department of Civil Engineering, Aalborg University, and a number of companies. Most of the project ideas in this catalogue may form the basis for long and short master projects as well as regular 3rd...... semester projects at the M.Sc. programme in Civil and Structural Engineering. Each project description provides a brief overview of the purpose as well as the main activities. Further, a weighting between theoretical analysis, experimental work and computer modelling has been proposed. Usually, this...... page. Furthermore, other ideas for projects may be discussed with a potential supervisor. Many private engineering companies have a homepage on which they state that they would like to collaborate with students on a master project....

  3. Quality assurance during construction of civil engineering structures important to safety of nuclear facilities

    International Nuclear Information System (INIS)

    The present manual is developed to deal with quality assurance aspect of civil engineering structures in a greater detail. This manual gives detail to develop QA plans specific to multifarious activities of civil engineering construction

  4. Impact of Past Project on the Educational Experience of Civil Engineering Students

    OpenAIRE

    Leong Lau Teck; Elleithy Wael

    2016-01-01

    Civil engineering lecturers need to develop effective early emphasis and educational challenges in order to prepare the current students with in-depth fundamental principles, applicable technical knowledge, and realistic appreciation on challenges faced by practicing civil engineers. In view of its importance, the use of past civil engineering projects as case studies have been integrated into the existing civil engineering curriculum at the University of Nottingham Malaysia Campus. In order ...

  5. Civil Engineering Feasibility Studies for Future Ring Colliders at CERN

    CERN Document Server

    Bruning, O; Myers, S; Osborne, J; Rossi, L; Waaijer, C; Zimmermann, F

    2013-01-01

    CERN civil engineers are studying the feasibility of several potential ring colliders to complement the LHC: an 80km circular tunnel to house the TLEP and VHE-LHC, and the ring-ring and linac-ring options for the LHeC. The feasibility of these projects is largely dependent on civil design and geotechnical and environmental risks. As civil infrastructure works typically represent one third of the cost of major physics projects, it is critical that the construction costs are well understood from the conceptual stage. This proceeding presents the first results of the feasibility studies for the 80km tunnel and the linac-ring LHeC. Presented at IPAC'13 Shanghai, 12-17 May 2013

  6. Information systems for civil engineering; Sistemas de informacion para ingenieria civil

    Energy Technology Data Exchange (ETDEWEB)

    De Buen R, Pablo R; Alvarado G, Alonso; Alaniz Q, Felipe de J; Guerrero F, Vicente A. [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2004-07-01

    Since its beginnings, in the Gerencia de Ingenieria Civil (GIC) of the Instituto de Investigaciones Electricas (IIE) the interest has existed to take advantage of and to promote the advantages that the appropriate use of the computerizing systems in the different tasks of civil engineering in the power sector represent. Either as a part of its infrastructure or at the request of their clients, at the GIC have been developed calculation systems for the analysis and design of special structures such as turbo-generators foundations, poles for transmission and distribution and transmission towers, in addition the information systems for the consultation and the analysis of diverse information, such as the related to the Manuals of Civil Works of the Comision Federal de Electricidad (CFE) or the relative to the existing instruments in the large dams of our country. In this article are briefly described some of the computer systems developed by the GIC in recent years. [Spanish] Desde sus inicios, en la Gerencia de Ingenieria Civil (GIC) del Instituto de Investigaciones Electricas (IIE) ha existido el interes por aprovechar y promover las ventajas que representa el uso adecuado de los sistemas de computo en las diferentes tareas de ingenieria civil en el sector energetico. Ya sea como parte de su infraestructura o a solicitud de sus clientes, en la GIC se han desarrollado sistemas de calculo para el analisis y diseno de estructuras especiales como lo son las cimentaciones de turbogeneradores, los postes para transmision y distribucion y las torres de transmision, ademas de sistemas de informacion para la consulta y el analisis de informacion diversa, como es la relacionada con los manuales de obras civiles de la Comision Federal de Electricidad (CFE) o a la relativa a los instrumentos existentes en las grandes presas de nuestro pais. En este articulo se describen brevemente algunos de los sistemas de computo desarrollos por la GIC en anos recientes.

  7. A Study of the Relationship Between the Practice of Civil Engineering and Student Courses: Volume 1.

    Science.gov (United States)

    Bull, A. J. U.; Richardson, E.

    Australian civil engineers were surveyed for a study intended to establish a model for development based on a list of the basic stock of knowledge and techniques that need to be mastered by the graduate civil engineer. Following a brief introduction and summary, chapters 3-7 review the survey objectives, civil engineering definitions and…

  8. Supportive Organisational Cultures and their effects on Male Civil Engineers

    Directory of Open Access Journals (Sweden)

    Valarie Francis

    2012-11-01

    Full Text Available Substantial changes, not only in the demographic composition of the Australian workforce, but also,in the roles and expectations of men and women, have led to organisational and employee attempts to reconcile work and non-work demands. Research suggests that when work-family balance practices are introduced they can greatly enhance organisational efficency. However factors embedded in the organisational culture can undermine these policies rendering them ineffective. This quantitative study examined the relationship between the perceptions of a supportive work culture and some work and non-work experiences of Australian male civil engineers. The research investigated the prevalence of organisational values supportive of work-life balances as well as the level of work-family conflict perceived by those engineers. This paper reports some initial results of the study. These indicated that male civil engineers experienced moderate levels of work-family conflict but do not perceive their organisations to be very supportive of employee nneeds to balance work and personal life. However those that reported a supportive work environment also reported higher levels of organisational commitment, greater job and life satisfaction as well as lower level of work-family conflict and lower intentions to quit. The implications of the findings for organisations employing civil engineers are discussed.   

  9. Supportive Organisational Cultures and their effects on Male Civil Engineers

    Directory of Open Access Journals (Sweden)

    Valarie Francis

    2012-11-01

    Full Text Available Substantial changes, not only in the demographic composition of the Australian workforce, but also,in the roles and expectations of men and women, have led to organisational and employee attempts to reconcile work and non-work demands. Research suggests that when work-family balance practices are introduced they can greatly enhance organisational efficency. However factors embedded in the organisational culture can undermine these policies rendering them ineffective. This quantitative study examined the relationship between the perceptions of a supportive work culture and some work and non-work experiences of Australian male civil engineers. The research investigated the prevalence of organisational values supportive of work-life balances as well as the level of work-family conflict perceived by those engineers. This paper reports some initial results of the study. These indicated that male civil engineers experienced moderate levels of work-family conflict but do not perceive their organisations to be very supportive of employee nneeds to balance work and personal life. However those that reported a supportive work environment also reported higher levels of organisational commitment, greater job and life satisfaction as well as lower level of work-family conflict and lower intentions to quit. The implications of the findings for organisations employing civil engineers are discussed.

  10. Thermodynamic Optimization of Flow Geometry in Mechanical and Civil Engineering

    Science.gov (United States)

    Bejan, Adrian; Lorente, Sylvie

    2001-12-01

    Recent developments in thermodynamic optimization are reviewed by focusing on the generation of optimal geometric form (shape, structure, topology) in flow systems. The flow configuration is free to vary. The principle that generates geometric form is the pursuit of maximum global performance (e.g., minimum flow resistance, minimum irreversibility) subject to global finiteness constraints (volume, weight, time). The resulting structures constructed in this manner have been named constructal designs. The thought that the same objective and constraints principle accounts for the optimally shaped flow paths that occur in natural systems (animate and inanimate) has been named constructal theory. Examples of large classes of applications are drawn from various sectors of mechanical and civil engineering: the distribution of heat transfer area in power plants, optimal sizing and shaping of flow channels and fins, optimal aspect ratios of heat exchanger core structures, aerodynamic and hydrodynamic shapes, tree-shaped assemblies of convective fins, treeshaped networks for fluid flow and other currents, optimal configurations for streams that undergo bifurcation or pairing, insulated pipe networks for the distribution of hot water and exergy over a fixed territory, and distribution networks for virtually everything that moves in society (goods, currency, information). The principle-based generation of flow geometry unites the thermodynamic optimization developments known in mechanical engineering with lesser known applications in civil engineering and social organization. This review extends thermodynamics, because it shows how thermodynamic principles of design optimization account for the development of optimal configurations in civil engineering and social organization.

  11. Importance of Nanotechnology in Civil Engineering

    Directory of Open Access Journals (Sweden)

    Kaizar Hossain

    2015-02-01

    Full Text Available Nanotechnology is an extremely wide term, the definition of which varies from field to field. Most commonly, nanotechnology is defined as “…the understanding, control, and restructuring of matter on the order of nanometers (i.e., less than 100 nm to create materials with fundamentally new properties and functions” [1]. Nanotechnology refers to the manipulation of individual atoms and molecules, by engineering matter at the atomic level.  At the nanoscale, familiar materials can have dramatically different properties: changes can affect color, elasticity, strength, conductivity, and other properties. Nanoparticles also have an increased surface area relative to their volume, making them especially reactive and useful in energy storage, for making composite materials, or as drug delivery devices. Nano materials are also able to be integrated with biological materials, producing new structures that have properties of both types of materials. There are two main types of approaches to nanotechnology: The “top-down” approach and the “bottom-up” approach. The “top-down” approach involves taking larger structures that are either reduced down in size until they reach the nano-scale, or are deconstructed into their composite parts. On the other hand, the “bottom-up” approach is where materials are constructed from the atomic or molecular components.Key Words: materials, structures, nanoparticles, Titanium dioxide,

  12. Role of Academic & Research Libraries and International Collaboration on Civil Engineering Education and Its Continuous Professional Development

    OpenAIRE

    Itoh, Yoshito

    2008-01-01

    Proceedings of the 2nd International Civil Engineering Conference on Civil Engineering and Sustainable Development, "modernizing our infrastructure", 23rd-25th September, 2008, Mombasa, Kenya (CE2008)

  13. LHC Civil Engineering Construction Contracts Cost Monitoring and Budget Forecasting

    CERN Document Server

    Skelton, K

    2000-01-01

    The Civil Engineering project for the LHC is estimated at 350 MCHF, of which about 316 MCHF is for the construction contracts. These contracts are based on a system of remeasurement whereby the consultant estimates the quantities required for the construction of each structure and the contractor commits himself to the unit price, which define the initial tender price. There are many factors that affect the final price for these contracts, from increases or decreases in quantities of the estimated amounts in the original bill of quantities to variations to the contract. This paper will look at how these factors change costs at the individual level of a structure to the overall costs of the contract. It will look at how the Civil Engineering Group monitors these changes to calculate cash flows and final costs and how this information is used as a basis for budget forecasts.

  14. Organization and management of the LHC civil-engineering contracts

    CERN Document Server

    Watson, T

    1999-01-01

    Since July 1994, the CERN Civil Engineering group within the ST division has been preparing and engaging contracts related to the Large Hadron Collider (LHC) project. Several of these contracts have values in excess of 10 MCHF and will be executed over a number of years; as such they represent an important part of the infrastructure works required for the LHC. To date, in excess of two hundred and fifty companies have been consulted in relation to these contracts. Contracts or orders have been placed with over thirty companies or joint ventures of companies from nearly all the CERN Member States. This paper aims to show the inter-relationships between these contracts and how the Civil Engineering group is carrying out the management of these important LHC contracts. The organization of the group will be explained along with the roles of individual members within the group.

  15. Outsourced design services lessons learned from LHC civil engineering

    CERN Document Server

    Watson, T

    2003-01-01

    In April 1996 CERN awarded three contracts for the provision of civil engineering design and site supervision services associated with the LHC Project. These three contracts with an average value at signature of 12MCHF were placed using the “two envelope” award system. Eight firms from six member states were integrated into three Joint Ventures. For Projects prior to the LHC, CERN would have carried out the design and supervision using in-house staff. The change to out-sourced services represented a major step for CERN. After seven years, the contracts are now coming to their conclusion. This paper aims to discuss the reasons why these contracts were originally implemented, the lessons than have been learnt over the last seven years and conclusions on how CERN could approach the need for civil engineering design services in the future.

  16. Tomographic imaging in civil engineering infrastructure

    Science.gov (United States)

    Gheshlaghi, Farshad

    This research was to assess the potential of tomographic imaging in a variety of geotechnical processes, with emphasis on matrix-based inversion algorithms. While most prior research in tomography has been based on simulated data, this research centers on case histories gathered under well-controlled, yet realistic field conditions. The goal is to invert a velocity image which reflects the state or evolution of a given soil parameter (e.g., stress, pore pressure, ion concentration) using a set of picked travel times. In general, it is assumed that "picked travel times" correspond to paths of shortest travel path (Fermat's principle). If the velocity contrast in the medium is more than 15 to 20 percent, rays bend toward higher velocity regions. In this case, entries in the coefficient matrix depend on a prior estimate of the velocity field. Therefore, the relation between pixel velocities and travel times is non-linear in general. This non-linear inversion problem can be solved by employing iterative solutions with ray tracing. Ray tracing methods can be categorized as: one-point methods, two-point methods, and whole-field methods. The computational time demand for ray tracing methods for each category is evaluated based on the number of segmental travel time calculations. The computational efficiency of the ray tracing methods is also compared for fundamental cases. Prior experience with simulated data has shown that the quality of inversion is unrealistically good when compared to inversions with real data. In part, this reflects the compatibility of forward simulation algorithms with hypotheses made in the inversion stage. A central goal of this thesis is to assess the potential of inversion with real data. A database of case histories has been compiled for this purpose. Part of this study is dedicated to the testing of pre-processing strategies in each case history. It is shown that data pre-processing can be employed to provide foresight about the medium, and

  17. WORKERS’ SALARY ACCOUNTING IN COST OF CIVIL ENGINEERING WORKS

    OpenAIRE

    O. S. Goloubova; U. V. Sosnovskaya

    2014-01-01

    A normative method for price formation established in civil engineering determines a procedure of cost formation in respect of any work. However, main problems are still pending in spite of introduction of new estimate-normative РСН-2007-base. The paper considers problems concerning inclusion of workers’ salary in the cost of works, tendencies of the 2008-legislation alterations, their effect on growth of work cost. 

  18. Civil Engineering/ Graduate Students/ Johnston & Jeffryes/ University of Minnesota/ 2012

    OpenAIRE

    Johnston, Lisa; Jeffryes, Jon

    2015-01-01

    From the University of Minnesota, this case study describes the seven modules that comprise their data information literacy program for students in Civil Engineering. The modules include: data management, organization and documentation, data access and ownership, data sharing and re-use, and preservation. Materials include a book chapter describing the case study, the syllabus for the program, a template for developing a data management plan and the evaluation forms that were used.

  19. Introduction to biotechnologies and biomimetics for civil engineering

    OpenAIRE

    Torgal, Fernando Pacheco

    2015-01-01

    This chapter starts with an overview on the sustainable development crucial challenges. The ones directly or indirectly related to the field of civil engineering are highlighted. These include greenhouse gas emissions (GHG) related to the energy consumption of the built environment, aggravated by urbanization forecast expansion, and the recent increase in building cooling needs due to climate change. It also includes the depletion of nonrenewable raw materials and mining-rel...

  20. Construction site environmental impact in civil engineering education

    OpenAIRE

    Teixeira, José M. Cardoso

    2005-01-01

    The environmental impact of construction activity has gained increasing importance in the last few years and become a key subject for civil engineering education. A survey of Portuguese higher education institutions shows that concern with this topic is mostly directed at the impact of large construction projects and especially focused on their operational stage. The impact of construction sites of smaller projects in urban areas tends to merit less attention, despite their importance for cit...

  1. Special issue on non-destructive testing in civil engineering

    OpenAIRE

    DEROBERT, Xavier; Abraham, Odile; Wiggenhauser, H.

    2012-01-01

    This special issue of the Journal of Infrastructure Systems aims to provide an overview on advances of advanced Non Destructive Testing applied to civil engineering structures. Indeed we are at a stage where a substantial part of the infrastructure is entering a critical age. Dams, bridges, tunnels, pavements, nuclear power plants, etc. require sustainable maintenance to qualify for extension of their service life in good condition and safely with appropriate service level. NDT methods hav...

  2. Civil Engineering for the SHiP facility

    CERN Document Server

    Osborne, John Andrew

    2015-01-01

    The enlarged scope of the recently proposed experiment to search for Heavy Neutral Leptons, SPSC-EOI-010, is a general purpose fixed target facility which in the initial phase is aimed at a general Search for Hidden Particles (SHiP) as well as tau neutrino physics. This report represents an annex to the SHiP Technical Proposal summarizing the civil engineering considerations for SHiP.

  3. Development of a Civil Engineer Corps community portal prototype

    OpenAIRE

    Rader, Neil Christopher.

    2002-01-01

    Approved for public release; distribution is unlimited The Civil Engineer Corps (CEC) is a relatively small Navy community consisting of approximately 1300 officers. Billets for the CEC are located around the world, and the community requires the ability to disseminate information as efficiently as possible to all corners of the world. Currently, information resources are available in both print and electronic forms in numerous locations. This thesis explores the concept of providing a sin...

  4. Civil Engineer Corps accessions: forecasting interview requirements and travel budgets

    OpenAIRE

    Sisson, Max

    2008-01-01

    MBA Professional Report The purpose of this MBA Project is to provide insight into interview requirements and travel budgets for the Civil Engineer Corps accessions team through the use of forecasting. The goal of this project is to provide a forecasting model that can predict interview requirements and form the basis for constructing travel budgets and estimates. The primary tool utilized is spreadsheet modeling to include extensive linear regression analysis. Additional insight is pr...

  5. Integrating Sustainability into Civil Engineering Education: Curriculum Development & Implementation

    OpenAIRE

    SINNOTT, DEREK; Thomas, Ken

    2012-01-01

    The role of the civil engineer as a specialist, expert or generalist in society is constantly evolving to meet the changing demands of government and industry to achieve a global sustainable world. Consequently, it is imperative that third level institutions meet the challenge of embedding sustainability into curriculum, providing students with generic competencies required for future employment. This paper describes the development and implementation of a curriculum for a new level 8 d...

  6. WORKERS’ SALARY ACCOUNTING IN COST OF CIVIL ENGINEERING WORKS

    Directory of Open Access Journals (Sweden)

    O. S. Goloubova

    2014-12-01

    Full Text Available A normative method for price formation established in civil engineering determines a procedure of cost formation in respect of any work. However, main problems are still pending in spite of introduction of new estimate-normative РСН-2007-base. The paper considers problems concerning inclusion of workers’ salary in the cost of works, tendencies of the 2008-legislation alterations, their effect on growth of work cost. 

  7. State Space identification of Civil Engineering Structures from Output Measurements

    OpenAIRE

    Kirkegaard, Poul Henning; Andersen, P

    1996-01-01

    This paper presents the results from a state space system identification simulation study of a 5-degrees-of freedom system driven by white noise. The aim of the study is to compare the durability of the fairly new Stochastic Subspace Technique (SST) with more well-known techniques for identification of civil engineering structures. The SST is compared with the stochastic realization estimator Matrix Block Hankel (MBH) and a prediction error method (PEM). The results show that the investigated...

  8. Development of Digital Computation of Building and Civil Engineering Quantities

    Directory of Open Access Journals (Sweden)

    Aderinola, O.S

    2014-06-01

    Full Text Available The work of Building and Civil engineering demands a greater knowledge, skill and precision in quantity estimation.The manual method of estimating quantities for building and civil engineering works has posed potential problem areas on work that is undertaken. The low reliability of manual estimation indicates discrepancies in the accuracy of quantities computed manually,hence,the introduction of a digital computation.It is envisaged that this method will greatly reduce the complexities of different aspects when computing quantities for projects, as well as reduce the time to complete the computation and therefore projects can be started earlier.The paper reviewed the procedures involved in the development of a computer program for the digital computation of Building and Civil engineering quantities.The program was developed using Microsoft Visual C SHARP (C# programming language and Microsoft Visual studio. The steps/procedure used in achieving the development of the computer program was (1.designing the application interface,(2 adding controls to the window and (3writing codes behind the interface.The digital computation was tested using a proposed Road project and a proposed administrative buildingand the results showed an average of 100% of the items has 0 to 10 percentage difference for the road and 92% for the building in the final outputs of the quantities obtained through the manual computation and the digital computation and the software could therefore be said to be accurate and reliable.

  9. Quantum point contacts as heat engines

    OpenAIRE

    Pilgram, Sebastian; Sanchez, David; Lopez, Rosa

    2015-01-01

    The efficiency of macroscopic heat engines is restricted by the second law of thermodynamics. They can reach at most the efficiency of a Carnot engine. In contrast, heat currents in mesoscopic heat engines show fluctuations. Thus, there is a small probability that a mesoscopic heat engine exceeds Carnot's maximum value during a short measurement time. We illustrate this effect using a quantum point contact as a heat engine. When a temperature difference is applied to a quantum point contact, ...

  10. Automated output-only dynamic identification of civil engineering structures

    Science.gov (United States)

    Rainieri, C.; Fabbrocino, G.

    2010-04-01

    Modal-based damage detection algorithms are well-known techniques for structural health assessment, but they are not commonly used due to the lack of automated modal identification and tracking procedures. Development of such procedures is not a trivial task since traditional modal identification requires extensive interaction from an expert user. Nevertheless, computational efforts have to be carefully considered. If fast on-line data processing is crucial for quickly varying in time systems (such as a rocket burning fuel), a number of vibration-based condition monitoring applications are performed at very different time scales, resulting in satisfactory time steps for on-line data analysis. Moreover, promising results in the field of automated modal identification have been recently achieved. In the present paper, a literature review on this topic is presented and recent developments concerning fully automated output-only modal identification procedures are described. Some case studies are also reported in order to validate the approach. They are characterized by different levels of complexity, in terms of mode coupling, dynamic interaction effects and level of vibration. Advantages and drawbacks of the proposed approach will be pointed out with reference to available experimental results. The final objective is the implementation of a fully automated system for vibration-based structural health monitoring of civil engineering structures and identification of adequate requirements about sensor number and layout, record duration and hardware characteristics able to ensure a reliable low-cost health assessment of constructions. Results of application of the proposed methodology to modal parameter estimation in operational conditions and during ground motions induced by the recent L'Aquila earthquake will be finally presented and discussed.

  11. Grouting applications in civil engineering. Volume I and II

    International Nuclear Information System (INIS)

    A comprehensive description of grouting applications in civil engineering is presented that can serve as a basis for the selection of grouting methods in the borehole sealing problem. The breadth and depth of the study was assured by conducting the main part of the review, the collection and evaluation of information, without specifically considering the borehole sealing problem (but naturally incorporating any aspect of civil engineering applications that could be of potential use). Grouting is very much an art and not a science. In most cases, it is a trial and error procedure where an inexpensive method is initially tried and then a more expensive one is used until the desired results are obtained. Once a desired effect is obtained, it is difficult to credit any one procedure with the success because the results are due to the summation of all the methods used. In many cases, the method that proves successful reflects a small abnormality in the ground or structure rather than its overall characteristics. Hence, successful grouting relies heavily on good engineering judgement and experience, and not on a basic set of standard correlations or equations. 800 references

  12. Civil Engineering Projects Gain in Importance in Europe

    OpenAIRE

    Margarete Czerny

    1990-01-01

    Over the last two years the construction industry in Western Europe was an integral part of the economic upswing. The construction volume rose by 5.8 percent in 1988 and by 4.6 percent in 1989. The upswing in construction activity will continue, though slightly weakened, into 1990 with a rate of 2½percent. In 1989, the fastest growing market category was non-residential construction and civil engineering; residential construction and renovation and modernization follow in second place. New ho...

  13. Multi-hazard approaches to civil infrastructure engineering

    CERN Document Server

    LaFave, James

    2016-01-01

    This collection focuses on the development of novel approaches to address one of the most pressing challenges of civil engineering, namely the mitigation of natural hazards. Numerous engineering books to date have focused on, and illustrate considerable progress toward, mitigation of individual hazards (earthquakes, wind, and so forth.). The current volume addresses concerns related to overall safety, sustainability and resilience of the built environment when subject to multiple hazards: natural disaster events that are concurrent and either correlated (e.g., wind and surge); uncorrelated (e.g., earthquake and flood); cascading (e.g., fire following earthquake); or uncorrelated and occurring at different times (e.g., wind and earthquake). The authors examine a range of specific topics including methodologies for vulnerability assessment of structures, new techniques to reduce the system demands through control systems; instrumentation, monitoring and condition assessment of structures and foundations; new te...

  14. Estimating Modal Parameters of Civil Engineering Structures subject to Ambient and Harmonic Excitation

    DEFF Research Database (Denmark)

    Andersen, Palle; Brincker, Rune; Ventura, Carlos;

    In this paper addresses the problems of separating structural modes and harmonics arising from sinusoidal excitation. Though the problem is mostly know in mechanical engineering applications such as rotating machinery, some civil engineering applications experiences the same challenges. A robust...... and fast harmonic detection procedure is presented and illustrated on a civil engineering case....

  15. A Case Study: Problem-Based Learning for Civil Engineering Students in Transportation Courses

    Science.gov (United States)

    Ahern, A. A.

    2010-01-01

    This paper describes two case studies where problem-based learning (PBL) has been introduced to undergraduate civil engineering students in University College Dublin. PBL has recently been put in place in the penultimate and final year transport engineering classes in the civil engineering degree in University College Dublin. In this case study,…

  16. George Filz named Charles E. Via Jr. Professor of Civil and Environmental Engineering

    OpenAIRE

    Crumbley, Liz

    2007-01-01

    George M. Filz of Blacksburg, professor of civil and environmental engineering in the College of Engineering at Virginia Tech, was appointed the Charles E. Via Jr. Professor of Civil and Environmental Engineering by the Virginia Tech Board of Visitors during the board's quarterly meeting August 27.

  17. What are perceptions of lecturers towards using cooperative learning in civil engineering?

    OpenAIRE

    Ahern, Aoife

    2007-01-01

    The objective of the current paper is to examine how group learning and cooperative learning are used in civil engineering courses. The paper defines group learning and cooperative learning in the first section. It is hypothesized that group learning is used in civil engineering courses to build teamwork skills and communication skills among civil engineers but that its effectiveness is not maximized owing to a lack of awareness of how it can be structured. The paper suggests that using coope...

  18. REALIZATION OF COMPETENCE-BASED APPROACH IN THE TEACHING OF FOREIGN LANGUAGES TO CIVIL ENGINEERING STUDENTS

    OpenAIRE

    Kruchinina, G.; Patyaeva, N.

    2008-01-01

    The article deals with the problems of improving the quality of teaching foreign languages to civil engineering students when competence-based approach is used to setting teaching objectives and planning the results of education. The authors describe the model of the didactic system for developing foreign language competence of civil engineering students in their professional domain. The results of the experiment carried out to develop foreign language competence of civil engineering students...

  19. Quantum point contacts as heat engines

    Science.gov (United States)

    Pilgram, Sebastian; Sánchez, David; López, Rosa

    2015-11-01

    The efficiency of macroscopic heat engines is restricted by the second law of thermodynamics. They can reach at most the efficiency of a Carnot engine. In contrast, heat currents in mesoscopic heat engines show fluctuations. Thus, there is a small probability that a mesoscopic heat engine exceeds Carnot's maximum value during a short measurement time. We illustrate this effect using a quantum point contact as a heat engine. When a temperature difference is applied to a quantum point contact, the system may be utilized as a source of electrical power under steady state conditions. We first discuss the optimal working point of such a heat engine that maximizes the generated electrical power and subsequently calculate the statistics for deviations of the efficiency from its most likely value. We find that deviations surpassing the Carnot limit are possible, but unlikely.

  20. Floating Point Engine using VHDL

    Directory of Open Access Journals (Sweden)

    Najib Ghatte

    2014-02-01

    Full Text Available Floating Point arithmetic is by far the most used way of approximating real number arithmetic for performing numerical calculations on modern computers. Each computer had a different arithmetic for long time: bases, significant and exponents’ sizes, formats, etc. Each company implemented its own model and it hindered the portability between different equipments until IEEE 754 standard appeared defining a single and universal standard. This paper deals with the implementation of single precision as well as double precision floating point arithmetic adder as well as multiplier according with the IEEE 754 standard and using the hardware programming language VHDL. VHDL Codes so designed are simulated for various set of inputs and desired results are obtained. Codes are synthesized on device XC3S5000 having package as FG900 of Spartan®-3 FPGA family.

  1. Defining Gas Turbine Engine Performance Requirements for the Large Civil TiltRotor (LCTR2)

    Science.gov (United States)

    Snyder, Christopher A.

    2013-01-01

    Defining specific engine requirements is a critical part of identifying technologies and operational models for potential future rotary wing vehicles. NASA's Fundamental Aeronautics Program, Subsonic Rotary Wing Project has identified the Large Civil TiltRotor (LCTR) as the configuration to best meet technology goals. This notional vehicle concept has evolved with more clearly defined mission and operational requirements to the LCTR-iteration 2 (LCTR2). This paper reports on efforts to further review and refine the LCTR2 analyses to ascertain specific engine requirements and propulsion sizing criteria. The baseline mission and other design or operational requirements are reviewed. Analysis tools are described to help understand their interactions and underlying assumptions. Various design and operational conditions are presented and explained for their contribution to defining operational and engine requirements. These identified engine requirements are discussed to suggest which are most critical to the engine sizing and operation. The most-critical engine requirements are compared to in-house NASA engine simulations to try to ascertain which operational requirements define engine requirements versus points within the available engine operational capability. Finally, results are summarized with suggestions for future efforts to improve analysis capabilities, and better define and refine mission and operational requirements.

  2. Report for Working Group 2:Design Education in Civil and Environmental Engineering

    OpenAIRE

    Bjerregaard Jensen, Lotte; Thompson, Mary Kathryn

    2013-01-01

    The theme for the second working group was design education in civil and environmental engineering. Issues discussed during this meeting included the current state of the art of civil design education, the importance of civil design education, tools andtechniques that can be used to build design competencies, the importance of balancing hard and soft skills, and the role that culture and context play and will continue to play in civil design in the future.

  3. Experimental, Numerical and Virtual Tools for Civil Engineering Students

    Directory of Open Access Journals (Sweden)

    José Couto Marques

    2011-04-01

    Full Text Available Three sets of teaching tools developed for Civil Engineering students are presented in this paper. The first is a didactic test frame for structural mechanics and its virtual replica. The second is an outfit for small scale seepage studies. The third is a set of portable devices for visual demonstration of several phenomena of interest for introductory soil mechanics classes.

  4. International Linear Collider Project and civil engineering technology

    International Nuclear Information System (INIS)

    The objectives, activities and members of the Linear Collider Subcommittee of Japan Society of Civil Engineers (LC subcommittee) are described. The LC subcommittee consisted of five working groups such as the working group on planning and project and management, working group on geological survey, test, and environmental design, working group on structural and environmental design, working group on construction and maintenance and working group on information investigation of ILC. The policy of activities, work schedule, and report of each working group are described. Construction of ILC research facilities, standard cross section of tunnel, measurement results of long-term displacement of large underground cavities, the tunnel damages by earthquake in the south part of Hyogo prefecture in Japan, TBM method, collection of information are reported. (S.Y.)

  5. Critical review on active control in civil engineering structures

    International Nuclear Information System (INIS)

    One of the existing new application areas for feed-back system design has to do with the protection of Civil Engineering Structures from dynamic loading such as strong earthquakes, high wind, extreme waves, heavy traffic and highway loading. Buildings and other physical have traditionally been relied on their strength and ability to dissipate energy to severe dynamic loading. In recent years greater attention has been directed towards the use of control and automation to mitigate the effects of these dynamic loads on structures. One of such control is active control system. An actively controlled structure is defined as the one consisting of two types of load resisting members -static or passive member and the dynamic or active member. Their integration in optimal fashion produces a structure that is adaptive to changing environmental loads. (author)

  6. Seismic qualification of civil engineering structures - Temelin NPP

    International Nuclear Information System (INIS)

    Basic information is presented about the input data and methodology used for evaluation of Temelin NPP civil structures. The existing conditions as listed in POSAR report for the two reactor units are considered. The original design of the power plant assumed a lower level of locality seismic hazard, as followed from seismological surveys that where then available. Later the seismic assessment was updated while fully respecting IAEA recommendations and using a minimum value of acceleration in the horizontal direction PGAHOR = 0.1 g at free field level for SL-2. In relation to the new seismic project, new qualification of the structures, components and systems classed as seismic resistance category 1 was carried out. Since the Czech Republic has no specific technical standards for seismic resistance evaluation of nuclear power plants, a detailed methodology was elaborated, comprising principles of seismic resistance evaluation based on IAEA guides and on common practice in countries with advanced nuclear power engineering. (P.A.)

  7. Nanosensors for structural monitoring in civil engineering: New insight on promising carbon nanotubes devices

    OpenAIRE

    LEBENTAL, Bérengère; Norman, Evgeny; Gorintin, Louis; Renaux, Philippe; BONDAVALLI, Paulo; COJOCARU, Costel-Sorin; Ghis, Anne

    2011-01-01

    In recent years, requirements in terms of service-life of civil engineering structures have become more and more stringent, so that the focus of designers and owners is now set on structural durability. Foreseeing structural failures and repairing damaged structures at an early stage has become a major stake. This approach calls for an accurate knowledge of the state of the structure at any point in its lifetime. This is the incentive for the world-wide development of various in-situ monitori...

  8. Increasing Awareness of Sustainable Water Management for Future Civil Engineers

    Science.gov (United States)

    Ilic, Suzana; Karleusa, Barbara; Deluka-Tibljas, Aleksandra

    2010-05-01

    There are more than 1.2 billion people around the world that do not have access to drinking water. While there are plans under the United Nations Millennium Development Goals to halve this number by 2015, there are a number of regions that will be exposed to water scarcity in the coming future. Providing sufficient water for future development is a great challenge for planners and designers of water supply systems. In order to design sustainable water supplies for the future, it is important to learn how people consume water and how water consumption can be reduced. The education of future civil engineers should take into account not only technical aspects of the water supply but also the accompanying social and economical issues, and appreciated the strengths and weaknesses of traditional solutions. The Faculty of Civil Engineering, at the University of Rijeka, has begun incorporating a series of activities that engage undergraduate students and the local community to develop a mutual understanding of the future needs for sustainable management. We present one of the activities, collaboration with the Lancaster Environment Centre at Lancaster University in the UK through the field course Water and environmental management in Mediterranean context. The course, which is designed for the Lancaster University geography students, features a combination of field trips and visits to provide an understanding of the socio-economic and environmental context of water management in two counties (Istra and Primorsko-Goranska). Students from Lancaster visit the Croatian water authority and a regional water company, where they learn about current management practices and problems in managing water supplies and demand through the year. They make their own observations of current management practices in the field and learn about water consumption from the end users. One day field visit to a village in the area that is still not connected to the main water supply system is

  9. Identification of Civil Engineering Structures using Multivariate ARMAV and RARMAV Models

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Andersen, P.; Brincker, Rune

    This paper presents how to make system identification of civil engineering structures using multivariate auto-regressive moving-average vector (ARMAV) models. Further, the ARMAV technique is extended to a recursive technique (RARMAV). The ARMAV model is used to identify measured stationary data....... The results show the usefulness of the approaches for identification of civil engineering structures excited by natural excitation...

  10. Maintenance of civil engineering structures important to safety of Nuclear Power Plants

    International Nuclear Information System (INIS)

    Civil engineering structures in nuclear installations form an important feature having implications to safety performance of these installations. This safety standard is written to specify the objectives and minimum requirements for the design of civil engineering buildings/structures that are to be fulfilled to provide adequate assurance for safety of nuclear installations in India

  11. What Are the Perceptions of Lecturers towards Using Cooperative Learning in Civil Engineering?

    Science.gov (United States)

    Ahern, Aoife

    2007-01-01

    The objective of the current paper is to examine how group learning and cooperative learning are used in civil engineering courses. The paper defines group learning and cooperative learning in the first section. It is hypothesized that group learning is used in civil engineering courses to build teamwork skills and communication skills among civil…

  12. A Strategic Approach for Supporting the Future of Civil Engineering Education in Europe

    Science.gov (United States)

    Angelides, Demos C.; Loukogeorgaki, Eva

    2005-01-01

    A new strategic vision of the extensively debated European higher education is proposed with focus on civil engineering. Civil engineering education for the future is considered with relevance to potential world-wide trends and anticipated societal requirements and, therefore, required employee qualifications of the construction-related providers…

  13. Developing a Dynamics and Vibrations Course for Civil Engineering Students Based on Fundamental-Principles

    Science.gov (United States)

    Barroso, Luciana R.; Morgan, James R.

    2012-01-01

    This paper describes the creation and evolution of an undergraduate dynamics and vibrations course for civil engineering students. Incorporating vibrations into the course allows students to see and study "real" civil engineering applications of the course content. This connection of academic principles to real life situations is in…

  14. Are Quantity Surveyors Competent to Value for Civil Engineering Works? Evaluating QSs' Competencies and Militating Factors

    Science.gov (United States)

    Olawumi, Timothy Oluwatosin; Ayegun, Olaleke Amos

    2016-01-01

    The role of the quantity surveyor is one that is often unclear amongst the general public. This study discussed the competencies of the quantity surveyor in measuring and managing civil engineering works and also carrying out the financial management for civil engineering construction projects; also outlined the various competencies and skills…

  15. Civil Engineering Applications of Ground Penetrating Radar in Finland

    Science.gov (United States)

    Pellinen, Terhi; Huuskonen-Snicker, Eeva; Olkkonen, Martta-Kaisa; Eskelinen, Pekka

    2014-05-01

    Ground penetrating radar (GPR) has been used in Finland since 1980's for civil engineering applications. First applications in this field were road surveys and dam inspections. Common GPR applications in road surveys include the thickness evaluation of the pavement, subgrade soil evaluation and evaluation of the soil moisture and frost susceptibility. Since the 1990's, GPR has been used in combination with other non-destructive testing (NDT) methods in road surveys. Recently, more GPR applications have been adopted, such as evaluating bridges, tunnels, railways and concrete elements. Nowadays, compared with other countries GPR is relatively widely used in Finland for road surveys. Quite many companies, universities and research centers in Finland have their own GPR equipment and are involved in the teaching and research of the GPR method. However, further research and promotion of the GPR techniques are still needed since GPR could be used more routinely. GPR has been used to evaluate the air void content of asphalt pavements for years. Air void content is an important quality measure of pavement condition for both the new and old asphalt pavements. The first Finnish guideline was released in 1999 for the method. Air void content is obtained from the GPR data by measuring the dielectric value as continuous record. To obtain air void content data, few pavement cores must be taken for calibration. Accuracy of the method is however questioned because there are other factors that affect the dielectric value of the asphalt layer, in addition to the air void content. Therefore, a research project is currently carried out at Aalto University in Finland. The overall objective is to investigate if the existing GPR technique used in Finland is accurate enough to be used as QC/QA tool in assessing the compaction of asphalt pavements. The project is funded by the Finnish Transport Agency. Further research interests at Aalto University include developing new microwave asphalt

  16. Digital microwave communication engineering point-to-point microwave systems

    CERN Document Server

    Kizer, George

    2013-01-01

    The first book to cover all engineering aspects of microwave communication path design for the digital age Fixed point-to-point microwave systems provide moderate-capacity digital transmission between well-defined locations. Most popular in situations where fiber optics or satellite communication is impractical, it is commonly used for cellular or PCS site interconnectivity where digital connectivity is needed but not economically available from other sources, and in private networks where reliability is most important. Until now, no book has adequately treated all en

  17. Exploring Advanced Technology Gas Turbine Engine Design and Performance for the Large Civil Tiltrotor (LCTR)

    Science.gov (United States)

    Snyder, Christopher A.

    2014-01-01

    A Large Civil Tiltrotor (LCTR) conceptual design was developed as part of the NASA Heavy Lift Rotorcraft Systems Investigation in order to establish a consistent basis for evaluating the benefits of advanced technology for large tiltrotors. The concept has since evolved into the second-generation LCTR2, designed to carry 90 passengers for 1,000 nautical miles at 300 knots, with vertical takeoff and landing capability. This paper explores gas turbine component performance and cycle parameters to quantify performance gains possible for additional improvements in component and material performance beyond those identified in previous LCTR2 propulsion studies and to identify additional research areas. The vehicle-level characteristics from this advanced technology generation 2 propulsion architecture will help set performance levels as additional propulsion and power systems are conceived to meet ever-increasing requirements for mobility and comfort, while reducing energy use, cost, noise and emissions. The Large Civil Tiltrotor vehicle and mission will be discussed as a starting point for this effort. A few, relevant engine and component technology studies, including previous LCTR2 engine study results will be summarized to help orient the reader on gas turbine engine architecture, performance and limitations. Study assumptions and methodology used to explore engine design and performance, as well as assess vehicle sizing and mission performance will then be discussed. Individual performance for present and advanced engines, as well as engine performance effects on overall vehicle size and mission fuel usage, will be given. All results will be summarized to facilitate understanding the importance and interaction of various component and system performance on overall vehicle characteristics.

  18. Case study of a project-based learning course in civil engineering design

    OpenAIRE

    Gavin, Kenneth

    2011-01-01

    This paper describes the use of project-based learning to teach design skills to civil engineering students at University College Dublin (UCD). The paper first considers the development of problem-based leaning (PBL) as a tool in higher education. The general issues to be considered in the design of the curriculum for a PBL module are reviewed. Consideration of the literature on the application of PBL in civil engineering suggests that, because of the hierarchical nature of engineering educat...

  19. Civil engineering work to raise the level of Route Goward

    CERN Multimedia

    2013-01-01

    Civil engineering work to raise the level of Route Goward will take place during Long Shutdown 1. The work will begin on 18 March 2013 and is expected to last around 5 months.   Route Goward runs over the top of the PS tunnel and is the only access route to the inside of the ring. The layer of shielding backfill beneath this road is the thinnest anywhere on the PS ring. As the purpose of this shielding is to protect against the ionising radiation emitted by the accelerator when in operation, this road has been classified as a “supervised radiation area” according to radiation protection regulations. This classification was merely a temporary solution and, on the recommendation of the PS Radiation Working Group (PSRWG), the decision has been taken to raise the surface level permanently by around 2 m in order to increase the thickness of the shielding and thus lower the dose rate to that of a non-designated area. As the PS tunnel itself is unable to withstand the weight of t...

  20. Fiber-optic sensor applications in civil and geotechnical engineering

    Science.gov (United States)

    Habel, Wolfgang R.; Krebber, Katerina

    2011-09-01

    Different types of fiber-optic sensors based on glass or polymeric fibers are used to evaluate material behavior or to monitor the integrity and long-term stability of load-bearing structure components. Fiber-optic sensors have been established as a new and innovative measurement technology in very different fields, such as material science, civil engineering, light-weight structures, geotechnical areas as well as chemical and high-voltage substations. Very often, mechanical quantities such as deformation, strain or vibration are requested. However, measurement of chemical quantities in materials and structure components, such as pH value in steel reinforced concrete members also provides information about the integrity of concrete structures. A special fiber-optic chemical sensor for monitoring the alkaline state (pH value) of the cementitious matrix in steel-reinforced concrete structures with the purpose of early detection of corrosion-initiating factors is described. The paper presents the use of several fiber-optic sensor technologies in engineering. One example concerns the use of highly resolving concrete-embeddable fiber Fabry-Perot acoustic emission (AE) sensors for the assessment of the bearing behaviour of large concrete piles in existing foundations or during and after its installation. Another example concerns fiber Bragg grating (FBG) sensors attached to anchor steels (micro piles) to measure the strain distribution in loaded soil anchors. Polymer optical fibers (POF) can be — because of their high elasticity and high ultimate strain — well integrated into textiles to monitor their deformation behaviour. Such "intelligent" textiles are capable of monitoring displacement of soil or slopes, critical mechanical deformation in geotechnical structures (dikes, dams, and embankments) as well as in masonry structures during and after earthquakes.

  1. Indication of Curricular Guide Lines for the Civil Engineering Graduation Course

    OpenAIRE

    Gilson Morales

    2001-01-01

    The present work has as objective to present a profile of the graduation course in Civil Engineering compatible with the regional socioeconomic reality, assisting the market expectations and in agreement with the current development of the industry of the civil construction.

  2. Practical Applications of Semi-active Control Systems to Civil Engineering Structures

    OpenAIRE

    Florentina Chira; Cristian Pastia; Septimiu-George Luca

    2007-01-01

    During the last few years, it has been paid a considerable attention to the searching and developing of some procedures and mechanisms of structural control to mitigate the effects of dynamic environmental hazards on civil engineering structures. In this paper we review some full-scale applications of semi-active control systems for the protection of the civil structures under dynamic actions.

  3. Recent Applications of Some Active Control Systems to Civil Engineering Structures

    OpenAIRE

    Cristian Pastia; Septimiu-George Luca; Florentina Chira

    2007-01-01

    The application of control systems to civil engineering structures has been investigated in recent years to demonstrate the efficiency of these systems during exceptional natural events such as earthquakes and severe winds. In this paper, a review of some full-scale implementations of active and hybrid control systems for the protection of the civil structures to dynamic actions is performed.

  4. Materials of construction for civil engineering structures important to safety of nuclear facilities

    International Nuclear Information System (INIS)

    The objective of this document is to provide guidance on specification of major materials to be used in construction work of civil engineering structures important to safety of nuclear facilities and to furnish approaches for their implementation

  5. The Use of Mini-projects in the Teaching of Geotechnics to Civil Engineering Undergraduates.

    Science.gov (United States)

    Anderson, W. F.; And Others

    1985-01-01

    Geotechnics (which encompasses soil and rock mechanics, engineering geology, foundation design, and ground engineering methods) is a major component of virtually all civil engineering courses. Show how mini-projects are used to teach this subject. Format of projects, development of presentation skills, and assessment considerations are discussed.…

  6. Infrared emissivity measurements of building and civil engineering materials: a new device for measuring emissivity

    OpenAIRE

    Monchau, Jean-Pierre; Marchetti, Mario; Ibos, Laurent; Dumoulin, Jean; Feuillet, Vincent; Candau, Yves

    2014-01-01

    The knowledge of the infrared emissivity of materials used in buildings and civil engineering structures is useful for two specific approaches. First, quantitative diagnosis of buildings or civil engineering infrastructures by infrared thermography requires emissivity values in the spectral bandwidth of the camera used for measurements, in order to obtain accurate surface temperatures; for instance, emissivity in the band III domain is required when using cameras with uncooled detectors (such...

  7. Environment, the earth, ocean, energy resource, nuclear, city, construction and civil engineering

    International Nuclear Information System (INIS)

    This book deals with Korean future technology like environment, the earth, ocean, energy, resource, nuclear, city, construction and civil engineering, which mentions the purpose of investigation, system of investigation, summary of investigation, object of research, important research and development field, prediction on realizable period, propel method of research and development, policy, characteristic of respondent, future technology table for major projects, result of the investigation by field : Environment, the earth, ocean, energy resource, nuclear, city, construction and civil engineering.

  8. Using discrete-event simulation to design reliable and cost-efficient civil engineering structures

    OpenAIRE

    Juan Pérez, Angel Alejandro; Ferrer Biosca, Alberto; Serrat Piè, Carles; Faulín, Javier; Hester, J; López Brosa, Pere

    2009-01-01

    In this paper the topic of Structural Reliability Analysis and its importance in modern Civil Engineering is introduced. Throughout the paper, some advantages that simulation-based approaches offer with respect to other classical approaches are discussed. After a review of the most relevant literature on the subject, a simulation-based approach is described. Our methodology makes use of discrete-event simulation techniques to help the civil engineer design more reli...

  9. EVALUATION OF THE AFFECTING FACTORS ON MOTIVATION OF CIVIL ENGINEERING STUDENTS IN ISTANBUL

    OpenAIRE

    MISTIKOĞLU, Gülgün

    2012-01-01

    There are interior and exterior factors affecting on motivation. Exterior effects depens on environment conditions and possibilties. In this study, universitys civil engineering students in İstanbul were administered a questionnaire to determine the (exterior) factor affecting their motivation.Prepared questionnaire for civil engineers students are asked to two groups questions.The first group of questions are consist of questions that directly affected the student`s achievement and motivati...

  10. Development of a prototype detailing management system for the Civil Engineer Corps

    OpenAIRE

    Weinstein, Brian Louis

    2002-01-01

    Approved for public release; distribution is unlimited The Civil Engineer Corps (CEC) is a small group of naval officers totaling approximately 1250 officers. Being a small community, the CEC attempts to capture the location and other relevant information of every CEC Officer at a given time and publis h that information in the Chief of Civil Engineers Directory (P-1). The CEC detailers also produce and work off a Staffing Plan to help them manage the movement of officers. The current proc...

  11. Fibre Bragg grating sensors for reinforcement corrosion monitoring in civil engineering structures

    International Nuclear Information System (INIS)

    Fibre optic strain sensors offer a number of advantages over the current electrical resistance type gauges, yet are not widely used in civil engineering applications. The use of fibre optic strain sensors (with a cross comparison with the output of electrical resistance gauges) to monitor the production of corrosion by-products in civil engineering concrete structures containing reinforcement bars has been investigated and results reported

  12. Utilization of electromigration in civil and environmental engineering--processes, transport rates and matrix changes.

    Science.gov (United States)

    Ottosen, Lisbeth M; Christensen, Iben V; Rorig-Dalgård, Inge; Jensen, Pernille E; Hansen, Henrik K

    2008-07-01

    Electromigration (movement of ions in an applied electric field) is utilized for supply or extraction of ions from various porous materials within both civil and environmental engineering. In civil engineering, most research has been conducted on the removal of chlorides from concrete to hinder reinforcement corrosion while in environmental engineering remediation of heavy metal polluted soil is the issue most studied. Never the less, experiments have been conducted with utilization for several other materials and purposes within both engineering fields. Even though there are many topics of common interest in the use of electromigration for the two fields, there is no tradition for collaboration. The present paper is a review with the aim of pointing out areas of shared interest. Focus is laid on the purposes of the different processes, transport rates of various ions in different materials and on changes in the matrix itself. Desorption and dissolution of the target elements into ionic form is a key issue to most of the processes, and can be the limiting step. The removal rate is generally below 1 cm day(- 1), but it can be much less than 1 mm day(- 1) when desorption is slow and insufficient. Matrix changes occurs under the action of the applied electric field and it includes both physico-chemical and hydrological changes. Some of the solid phases is weathered and new can be formed. Increased fundamental understanding of the effects and side effects, when applying the electric field to a porous material, can lead to improvement of the known technologies and possibly to new applications. PMID:18569289

  13. Point 5 - civil engineering : surface site, SX, pit, buildings, PX

    CERN Multimedia

    2000-01-01

    > de 00 :00 à 13 :15 le 06 janvier 2000 - vues extérieures du montage du bâtiment SX, du chantier, du puit PX dont le pourtour est congelé- installation des tubes de congélation du sol- bâtiments de la Cryogénie, avec mur anti-bruit- fond des puits creusement et évacuation des déblais > de 13 :17 à 17 :38 le 10 février 2000 - avancement du montage du SX - vues générales du chantier en surface > de 13 :40 à 24 :00 le 10 février 2000 - bâtiment SX vide, fin d’installation des ponts roulants - ferraillage de la dalle d’un bâtiment

  14. Point 5 - civil engineering : SX, travelling crane, pit, SY

    CERN Multimedia

    1999-01-01

    > de 00 :00 à 17 :34 le 07 septembre 1999 - montage et mise en place des 2 ponts roulants du SX > de 17 :35 à 36 :34 le 07 décembre 1999 - vues générales en surface de l’avancement des travaux du chantier du P5

  15. Impact of Past Project on the Educational Experience of Civil Engineering Students

    Directory of Open Access Journals (Sweden)

    Leong Lau Teck

    2016-01-01

    Full Text Available Civil engineering lecturers need to develop effective early emphasis and educational challenges in order to prepare the current students with in-depth fundamental principles, applicable technical knowledge, and realistic appreciation on challenges faced by practicing civil engineers. In view of its importance, the use of past civil engineering projects as case studies have been integrated into the existing civil engineering curriculum at the University of Nottingham Malaysia Campus. In order to enhance our undergraduate students’ understanding, cognitive learning desire, and overall learning experience, an additional module has been incorporated in the past five years to investigate major past civil engineering projects. Students are free to choose any of past projects as their case studies and are required to find, sort, synthesize, and present critical elements that contributed to the overall success of the past projects in the form of discussion essays. In this paper, the universal consensus between the lecturers and the students on the effectiveness of past civil engineering projects as case studies to enhance students’ lifelong learning desire and aspiration towards ethical practice are investigated. The lecturers’ and students’ views on the extent of coverage of the key elements and the preferred disciplines from the past projects are furthermore evaluated. The outcomes indicate that the use of past projects as case studies enhanced students’ educational experiences that conduce for cognitive learning desires (73% of lecturers & 81% of students, motivated for future ethical practice (82% of lecturers & 86% of students, and reassured aspiration (100% of lecturers & 97% of students in becoming practicing civil engineers upon graduation. A common view derives from this study is that the curriculum needs to further its extent of coverage on the industry practices.

  16. Fundamentals of civil engineering an introduction to the ASCE body of knowledge

    CERN Document Server

    McCuen, Richard H; Wong, Melanie K

    2011-01-01

    While the ASCE Body of Knowledge (BOK2) is the codified source for all technical and non-technical information necessary for those seeking to attain licensure in civil engineering, recent graduates have notoriously been lacking in the non-technical aspects even as they excel in the technical. Fundamentals of Civil Engineering: An Introduction to the ASCE Body of Knowledge addresses this shortfall and helps budding engineers develop the knowledge, skills, and attitudes suggested and implied by the BOK2. Written as a resource for all of the non-technical outcomes not specifically covered in the

  17. Learning by Seeing: The TEMAS Multimedia Learning Objects for Civil Engineers

    Science.gov (United States)

    Cadoni, Ezio; Botturi, Luca; Forni, Daniele

    2008-01-01

    A goal of engineering and architecture bachelor and master's programs is to provide students with practical and technical preparation in the mechanical characterization of materials and structures: future architects and civil engineers should be able to recognize and describe different construction materials and their behavior when used for…

  18. Boundaries - US Army Corps of Engineers - St. Paul District (MVP) Civil Works

    Data.gov (United States)

    Army Corps of Engineers, Department of the Army, Department of Defense — The US Army Corps of Engineers - St. Paul District Civil Works boundary. Boundary is based on 1:24k watershed data and coordination with MVR to determine shared...

  19. Abstracts and proceedings of the 31. annual conference of the Canadian Society for Civil Engineering : Building our civilization

    Energy Technology Data Exchange (ETDEWEB)

    Massiera, M.; Poitras, G.; El-Jabi, N.; Rankin, J.; Elektorowicz, M.; Haralampides, K. (eds.)

    2003-07-01

    This conference covered all aspects of civil engineering, a discipline which ensures the technical quality of all infrastructure to form a solid foundation on which to build the social, economic and political fabric of society. It was attended by representatives from academia, industry and the public sector. It also featured three specialty conferences that were held conjointly: (1) the fifth construction specialty conference, (2) the eighth environmental and sustainable engineering specialty conference, and (3) the first coastal, estuary and offshore engineering specialty conference. In addition, special technical sessions were organized, where a leading expert covered a special theme at the forefront of an emerging issue. A broad range of topics were discussed and several important advances made in the past few years were outlined. The conference featured 262 presentations, of which 18 papers have been indexed separately for inclusion in this database. refs., tabs., figs.

  20. Design of a System for Monitoring Reliability of Structures and Constructions in Civil Engineering

    Directory of Open Access Journals (Sweden)

    Tomislav S. Igić

    2011-07-01

    Full Text Available Monitoring of civil engineering structures and constructions requires techniques which can produce high precision and accuracy, reliable measurements and fast processing speed. The development of information and communication systems as well as of microprocessor controllers has enabled a creation of monitoring systems that can be used for tracking reliability of structures and constructions in civil engineering, with described key features. This paper describes in detail the architecture of the Civil Engineering Structures Reliability Monitoring (CERM system. The system has been designed for the purposes of the Technical Mechanics and Theory of Constructions Department at the Faculty of Civil Engineering and Architecture, University of Nis. Unlike general commercial monitoring systems, the CERM system has been specially designed for the purpose of reliability monitoring, and its potential will be further exploited in this paper. It is based on usage of universal microprocessor controllers Integraf of series 10X, along with specially designed software package. This system provides real time acquisition of measurements for observed civil engineering structures and analysis of received values based on developed mathematical models.

  1. 3rd International Civil and Infrastructure Engineering Conference

    CERN Document Server

    Hamid, Nor; Arshad, Mohd; Arshad, Ahmad; Ridzuan, Ahmad; Awang, Haryati

    2016-01-01

    The special focus of these proceedings is on the areas of infrastructure engineering and sustainability management. They provide detailed information on innovative research developments in construction materials and structures, in addition to a compilation of interdisciplinary findings combining nano-materials and engineering. The coverage of cutting-edge infrastructure and sustainability issues in engineering includes earthquakes, bioremediation, synergistic management, timber engineering, flood management and intelligent transport systems.

  2. Applications and issues of GIS as tool for civil engineering modeling

    Science.gov (United States)

    Miles, S.B.; Ho, C.L.

    1999-01-01

    A tool that has proliferated within civil engineering in recent years is geographic information systems (GIS). The goal of a tool is to supplement ability and knowledge that already exists, not to serve as a replacement for that which is lacking. To secure the benefits and avoid misuse of a burgeoning tool, engineers must understand the limitations, alternatives, and context of the tool. The common benefits of using GIS as a supplement to engineering modeling are summarized. Several brief case studies of GIS modeling applications are taken from popular civil engineering literature to demonstrate the wide use and varied implementation of GIS across the discipline. Drawing from the case studies, limitations regarding traditional GIS data models find the implementation of civil engineering models within current GIS are identified and countered by discussing the direction of the next generation of GIS. The paper concludes by highlighting the potential for the misuse of GIS in the context of engineering modeling and suggests that this potential can be reduced through education and awareness. The goal of this paper is to promote awareness of the issues related to GIS-based modeling and to assist in the formulation of questions regarding the application of current GIS. The technology has experienced much publicity of late, with many engineers being perhaps too excited about the usefulness of current GIS. An undoubtedly beneficial side effect of this, however, is that engineers are becoming more aware of GIS and, hopefully, the associated subtleties. Civil engineers must stay informed of GIS issues and progress, but more importantly, civil engineers must inform the GIS community to direct the technology development optimally.

  3. Reference Points: Engineering Technology Education Bibliography, 1987.

    Science.gov (United States)

    Engineering Education, 1989

    1989-01-01

    Lists articles and books published in 1987. Selects the following headings: administration, aeronautical, architectural, CAD/CAM, civil, computers, curriculum, electrical/electronics, industrial, industry/government/employers, instructional technology, laboratories, liberal studies, manufacturing, mechanical, minorities, research, robotics,…

  4. Quality Assessment Survey at the School of Civil Engineering at Aalborg University

    DEFF Research Database (Denmark)

    Brohus, Henrik

    2008-01-01

    As part of an improved quality assessment procedure at the School of Civil Engineering at Aalborg University, an online survey has been undertaken among all students. Due to external requirements and a wish for more structured feedback, an online questionnaire was presented to all students under...... the study board of civil engineering. The questionnaire was jointly developed for all study boards at Aalborg University. The questionnaire forms an investigation of students' satisfaction and evaluation of the overall structure of the education including self-reported performance assessment. The...

  5. Advanced spatio-temporal filtering techniques for photogrammetric image sequence analysis in civil engineering material testing

    Science.gov (United States)

    Liebold, F.; Maas, H.-G.

    2016-01-01

    The paper shows advanced spatial, temporal and spatio-temporal filtering techniques which may be used to reduce noise effects in photogrammetric image sequence analysis tasks and tools. As a practical example, the techniques are validated in a photogrammetric spatio-temporal crack detection and analysis tool applied in load tests in civil engineering material testing. The load test technique is based on monocular image sequences of a test object under varying load conditions. The first image of a sequence is defined as a reference image under zero load, wherein interest points are determined and connected in a triangular irregular network structure. For each epoch, these triangles are compared to the reference image triangles to search for deformations. The result of the feature point tracking and triangle comparison process is a spatio-temporally resolved strain value field, wherein cracks can be detected, located and measured via local discrepancies. The strains can be visualized as a color-coded map. In order to improve the measuring system and to reduce noise, the strain values of each triangle must be treated in a filtering process. The paper shows the results of various filter techniques in the spatial and in the temporal domain as well as spatio-temporal filtering techniques applied to these data. The best results were obtained by a bilateral filter in the spatial domain and by a spatio-temporal EOF (empirical orthogonal function) filtering technique.

  6. Utilization of electromigration in civil and environmental engineering - Processes, transport rates and matrix changes

    DEFF Research Database (Denmark)

    Ottosen, Lisbeth M.; Christensen, Iben Vernegren; Rörig-Dalgaard, Inge;

    2008-01-01

    reinforcement corrosion while in environmental engineering remediation of heavy metal polluted soil is the issue most studied. Never the less, experiments have been conducted with utilization for several other materials and purposes within both engineering fields. Even though there are many topics of common....... Matrix changes occurs under the action of the applied electric field and it includes both physico-chemical and hydrological changes. Some of the solid phases is weathered and new can be formed. Increased fundamental understanding of the effects and side effects, when applying the electric field......Electromigration (movement of ions in an applied electric field) is utilized for supply or extraction of ions from various porous materials within both civil and environmental engineering. In civil engineering, most research has been conducted on the removal of chlorides from concrete to hinder...

  7. Conceptual Design of a Two Spool Compressor for the NASA Large Civil Tilt Rotor Engine

    Science.gov (United States)

    Veres, Joseph P.; Thurman, Douglas R.

    2010-01-01

    This paper focuses on the conceptual design of a two spool compressor for the NASA Large Civil Tilt Rotor engine, which has a design-point pressure ratio goal of 30:1 and an inlet weight flow of 30.0 lbm/sec. The compressor notional design requirements of pressure ratio and low-pressure compressor (LPC) and high pressure ratio compressor (HPC) work split were based on a previous engine system study to meet the mission requirements of the NASA Subsonic Rotary Wing Projects Large Civil Tilt Rotor vehicle concept. Three mean line compressor design and flow analysis codes were utilized for the conceptual design of a two-spool compressor configuration. This study assesses the technical challenges of design for various compressor configuration options to meet the given engine cycle results. In the process of sizing, the technical challenges of the compressor became apparent as the aerodynamics were taken into consideration. Mechanical constraints were considered in the study such as maximum rotor tip speeds and conceptual sizing of rotor disks and shafts. The rotor clearance-to-span ratio in the last stage of the LPC is 1.5% and in the last stage of the HPC is 2.8%. Four different configurations to meet the HPC requirements were studied, ranging from a single stage centrifugal, two axi-centrifugals, and all axial stages. Challenges of the HPC design include the high temperature (1,560deg R) at the exit which could limit the maximum allowable peripheral tip speed for centrifugals, and is dependent on material selection. The mean line design also resulted in the definition of the flow path geometry of the axial and centrifugal compressor stages, rotor and stator vane angles, velocity components, and flow conditions at the leading and trailing edges of each blade row at the hub, mean and tip. A mean line compressor analysis code was used to estimate the compressor performance maps at off-design speeds and to determine the required variable geometry reset schedules of the

  8. M.Sc. in Civil and Structural Engineering:3rd Semester and Master’s Thesis Ideas 2014

    OpenAIRE

    2014-01-01

    The following pages contain a list of project ideas proposed by the scientific staff at the Department of Civil Engineering, Aalborg University, and a number of companies. Most of the project ideas in this catalogue may form the basis for long and short master projects as well as regular 3rd semester projects at the M.Sc. programme in Civil and Structural Engineering.

  9. M.Sc. in Civil and Structural Engineering:3rd Semester and Master’s Thesis Ideas 2011

    OpenAIRE

    2011-01-01

    This catalogue contains a list of project ideas proposed by the scientific staff at the Department of Civil Engineering, Aalborg University, and a number of companies. Most of the project ideas in this catalogue may form the basis for long and short candidate projects as well as regular 3rd semester projects at the M.Sc. programme in Civil and Structural Engineering.

  10. Embedded optical fiber sensors for continuous health monitoring of civil engineering structures in composite materials

    OpenAIRE

    Chapeleau, Xavier; Drissi Habti, Monssef; Tomiyama, Tomonori

    2010-01-01

    Embedding optical fibre-based sensors into composite structures in civil engineering is a promising alternative for structural health monitoring (SHM). This article is a review of the main sensing techniques based on optical fibres. Localized and multiplexed measurements as well as distributed measurements techniques are presented.

  11. Non-destructive testing in civil engineering (NDT-CE). Vol. 2. Posters

    Energy Technology Data Exchange (ETDEWEB)

    Schickert, G. [ed.; Wiggenhauser, H. [ed.

    1995-12-31

    This volume contains about more than 80 posters which were presented at the International Symposium on Non-Destructive Testing in Civil Engineering from September 26 to 28, 1995 in Berlin. The topics on NDT methods are: Acoustic emission, impact echo; Building dynamics, soils; Case studies; IR-thermography; Material properties; Moisture; Monitoring, sensors; Radar, electromagnetic methods; Reinforcements, corrosion; Ultrasonics; Special interest. (MM) (MM)

  12. The Attitude of Civil Engineering Students towards Health and Safety Risk Management: A Case Study

    Science.gov (United States)

    Petersen, A. K.; Reynolds, J. H.; Ng, L. W. T.

    2008-01-01

    The highest rate of accidents and injuries in British industries has been reported by the construction industry during the past decade. Since then stakeholders have recognised that a possible solution would be to inculcate a good attitude towards health and safety risk management in undergraduate civil engineering students and construction…

  13. An Approach to the Integration of Communication Skills Development within an Undergraduate Civil Engineering Program.

    Science.gov (United States)

    Hedges, Peter D.; Walley, W. J.

    1990-01-01

    Describes a civil engineering program at Aston University that integrates successfully the development of communication skills with technical training. Explains how the course on Public Sector Planning includes instruction and student work in written, oral, and decision-making skills. (KEH)

  14. The Civil Engineering Graduate Program at PUC-Rio: A Brazilian Experience.

    Science.gov (United States)

    Romanel, Celso; Filho, Jose Napoleao

    This document discusses the graduate programs in civil engineering at the Pontifical Catholic University of Rio de Janeiro, Brazil, the oldest Brazilian private university. The report features discussions of faculty member backgrounds, trends in student enrollment, women's participation in the program, degree completion, student origins,…

  15. Civil Engineering Technology Consultants' Workshop (Atlanta, Georgia, May 17-20, 1967).

    Science.gov (United States)

    Dobrovolny, Jerry S.

    A consultants' workshop was conducted by the Occupational Education Project of the American Association of Junior Colleges to orient the consultants to recent developments in civil engineering technology and their responsibilities in program development. This document, a summary of workshop presentations and discussions, is intended as a guide to…

  16. Information management in civil engineering infrastructural development: with focus on geological and geotechnical information

    NARCIS (Netherlands)

    Tegtmeier, W.; Zlatanova, S.; Van Oosterom, P.J.M.; Hack, H.R.G.K.

    2009-01-01

    In civil engineering infrastructural projects, information exchange and (re-) use in and between involved parties is difficult. This is mainly caused by a lack of information harmonization. Various specialists are working together on the development of an infrastructural project and are all using th

  17. Assessment by Employers of Newly Graduated Civil Engineers from the Islamic University of Gaza

    Science.gov (United States)

    Enshassi, Adnan; Hassouna, Ahmed

    2005-01-01

    The evaluation process is very important to identify and recognize the strengths and the weaknesses of graduated students. The purpose of this paper is to evaluate the performance of the newly graduated civil engineers from the Islamic University of Gaza in Palestine. The methodology was based on questionnaires and informal interview. The…

  18. CIVIL ENGINEERING TECHNOLOGY CONSULTANTS' WORKSHOP, REPORT OF PROCEEDINGS (ATLANTA, MAY 17-20, 1967).

    Science.gov (United States)

    DOBROVOLNY, JERRY S.

    THIS REPORT ATTEMPTS TO SHOW ADMINISTRATORS OF JUNIOR COLLEGES, TECHNICAL INSTITUTES, AND GOVERNMENT OR INDUSTRIAL TRAINING PROGRAMS CERTAIN CRITICAL PROBLEMS IN THE TRAINING OF CIVIL ENGINEERING TECHNICIANS. THE PHILOSOPHY OF TECHNICAL EDUCATION REQUIRES ATTENTION AS DOES THE IDENTIFICATION OF STUDENTS WHO CAN BENEFIT FROM AND SUCCESSFULLY…

  19. Assessing efficiency of road contracts can lead to less risk, more innovation says civil engineer

    OpenAIRE

    Nystrom, Lynn A.

    2008-01-01

    The most recent survey of the nation's highway infrastructure, conducted by the American Society of Civil Engineers in 2005, indicated that the U.S. road system is in poor condition, a marked contrast from the 1988 survey by the National Council on Public Works Improvement. At that time, the nation's roads were cited to be in better than fair condition.

  20. On the Uncertainty of Identification of Civil Engineering Structures using ARMA Models

    DEFF Research Database (Denmark)

    Andersen, P.; Brincker, Rune; Kirkegaard, Poul Henning

    In this paper the uncertainties of modal parameters estimated using ARMA models for identification of civil engineering structures are investigated. How to initialize the predictor part of a Gauss-Newton optimization algorithm is put in focus. A backward-forecasting procedure for initialization of...

  1. Identification of Time Varying Civil Engineering Structures using Multivariate Recursive Time Domain Models

    DEFF Research Database (Denmark)

    Andersen, P.; Skjærbæk, P. S.; Kirkegaard, Poul Henning

    smoothed quanties which have been obtained from SARCOF. The results show the usefulness of the technique for identification of a time varying civil engineering structure. It is found that all the techniques give reliable estiates of the frequencies of the two lowest modes and the first mode shape. Only the...

  2. Vibration Based Damage Assessment of a Civil Engineering Structures using a Neural Networks

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Rytter, A.

    In this paper the possibility of using a Multilayer Perceptron (MLP) network trained with the Backpropagation Algorith as a non-destructive damage assessment technique to locate and quantify a damage in Civil Engineering structures is investigated. Since artificial neural networks are proving to be...

  3. Report for Working Group 1: Design Research in Civil and Environmental Engineering

    DEFF Research Database (Denmark)

    Thompson, Mary Kathryn; Paradisi, Irene

    2013-01-01

    The first 2013 DCEE working group meeting focused on issues associated with design research in civil and environmental engineering. It addressed some of the motivation for establishing design as a research discipline in CEE and some of the challenges and outstanding questions about how to do so....

  4. On the Uncertainty of Identification of Civil Engineering Structures Using ARMA Models

    DEFF Research Database (Denmark)

    Andersen, Palle; Brincker, Rune; Kirkegaard, Poul Henning

    1995-01-01

    In this paper the uncertainties of modal parameters estimated using ARMA models for identification of civil engineering structures are investigated. How to initialize the predictor part of a Gauss-Newton optimization algorithm is put in focus. A backward-forecasting procedure for initialization of...

  5. Optimal Design of Experiments for Parametric Identification of Civil Engineering Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning

    Optimal Systems of experiments for parametric identification of civil engineering structures is investigated. Design of experiments for parametric identification of dynamic systems is usually done by minimizing a scalar measure, e.g the determinant, the trace ect., of an estimated parameter...

  6. A Sustainable Cohort of Professional Civil Engineering Graduates? Uncovering the United Kingdom Graduate Crisis

    Science.gov (United States)

    Edwards, David J.; Dainty, Andrew R. J.; Love, Peter E. D.

    2004-01-01

    Undergraduate applications to civil engineering courses have been declining at an alarming rate despite the industry's healthy economic activity. Concerns abound as to the long-term impact of this decline as the sector is already suffering skills shortages across virtually all of its occupations. This paper investigates the likely future trends in…

  7. Case Study of a Project-Based Learning Course in Civil Engineering Design

    Science.gov (United States)

    Gavin, K.

    2011-01-01

    This paper describes the use of project-based learning to teach design skills to civil engineering students at University College Dublin (UCD). The paper first considers the development of problem-based leaning (PBL) as a tool in higher education. The general issues to be considered in the design of the curriculum for a PBL module are reviewed.…

  8. Free Fall Misconceptions: Results of a Graph Based Pre-Test of Sophomore Civil Engineering Students

    Science.gov (United States)

    Montecinos, Alicia M.

    2014-01-01

    A partially unusual behaviour was found among 14 sophomore students of civil engineering who took a pre test for a free fall laboratory session, in the context of a general mechanics course. An analysis contemplating mathematics models and physics models consistency was made. In all cases, the students presented evidence favoring a correct free…

  9. Measured Engine Installation Effects of Four Civil Transport Airplanes

    Science.gov (United States)

    Senzig, David A.; Fleming, Gregg G.; Shepherd, Kevin P.

    2001-01-01

    The Federal Aviation Administration's Integrated Noise Model (INM) is one of the primary tools for land use planning around airports. The INM currently calculates airplane noise lateral attenuation using the methods contained in the Society of Automotive Engineer's Aerospace Information Report No. 1751 (SAE AIR 1751). Researchers have noted that improved lateral attenuation algorithms may improve airplane noise prediction. The authors of SAE AIR 1751 based existing methods on empirical data collected from flight tests using 1960s-technology airplanes with tail-mounted engines. To determine whether the SAE AIR 1751 methods are applicable for predicting the engine installation component of lateral attenuation for airplanes with wing-mounted engines, the National Aeronautics and Space Administration (NASA) sponsored a series of flight tests during September 2000 at their Wallops Flight Facility. Four airplanes, a Boeing 767-400, a Douglas DC-9, a Dassault Falcon 2000, and a Beech KingAir, were flown through a 20 microphone array. The airplanes were flown through the array at various power settings, flap settings, and altitudes to simulate take-off and arrival configurations. This paper presents the preliminary findings of this study.

  10. Identification of Civil Engineering Structures using Vector ARMA Models

    DEFF Research Database (Denmark)

    Andersen, Palle; Brincker, Rune; Kirkegaard, Poul Henning

    1998-01-01

    This paper describes the work which have been carried out in the project B.1: Damage Detection in Structures under Random Loading. The project is a part of the research programme Dynamics of Structures founded by the Danish Technical Research Council. The planned contents of and the requirements ...... from Dept. of Building Technology and Structural Engineering, Aalborg University....

  11. Linking Civil Engineering Education And Research With Industry (Session Keynote)

    DEFF Research Database (Denmark)

    Virdi, Kuldeep

    Linking engineering education with industry has been a basic aim of educators almost from the beginning of modern degree programmes. In the USA, reference is often made to ‘co-operative education’, where students spend periods in industry within the duration of their stay in a university. Indeed...

  12. [Civil engineering education at the Imperial College of Engineering in Tokyo: an analysis based on Ayahiko Ishibashi's memoirs].

    Science.gov (United States)

    Wada, Masanori

    2014-01-01

    The Imperial College of Engineering (ICE or Kobu-Daigakko) in Tokyo, founded in 1873 under the auspices of the Ministry of Public Works, was one of the most prominent modern institutions of engineering education in early Meiji Japan. Previous studies have revealed that the ICE offered large scale practical training programs at enterprises of the Ministry, which sometimes lasted several months, and praised their ideal combination of theory and practice. In reality, it has been difficult to evaluate the quality of education at the ICE mainly because of scarcity of sources. ICE students published a collection of memoirs for alumni members, commemorating the fiftieth-year of the history of the Tokyo Imperial University. Drawing on the previously neglected collection of students' memoires, this paper appraises the education of civil engineering offered by the ICE. The paper also compares this collection with other official records of the college, and confirms it as a reliable source, even though it contains some minor errors. The author particularly uses the memoirs by Ayahiko Ishibashi, one of the first graduates from its civil engineering course, who left sufficient reminiscences on education that he received. This paper, as a result, illustrates that the main practical training for the students of civil engineering was limited to designing process, including surveying. Furthermore, practical training that Ishibashi received at those enterprises often lacked a plan, and its effectiveness was questionable. PMID:25087447

  13. Investigation of low NOx staged combustor concept in high-speed civil transport engines

    Science.gov (United States)

    Nguyen, Hung Lee; Bittker, David A.; Niedzwiecki, Richard W.

    1989-01-01

    Levels of exhaust emissions due to high temperatures in the main combustor of high-speed civil transport (HSCT) engines during supersonic cruise are predicted. These predictions are based on a new combustor design approach: a rich burn/quick quench/lean burn combustor. A two-stage stirred reactor model is used to calculate the combustion efficiency and exhaust emissions of this novel combustor. A propane-air chemical kinetics model is used to simulate the fuel-rich combustion of jet fuel. Predicted engine exhaust emissions are compared with available experimental test data. The effect of HSCT engine operating conditions on the levels of exhaust emissions is also presented. The work described in this paper is a part of the NASA Lewis Research Center High-Speed Civil Transport Low NO(x) Combustor program.

  14. Challenges and Opportunities for Establishing Design as a Research Discipline in Civil and Environmental Engineering

    DEFF Research Database (Denmark)

    Thompson, Mary Kathryn

    2013-01-01

    faculty, research and education communities, conferences, and journals. However, design remains an emerging sub-discipline in civil and environmental engineering – practiced, valued, and taught but not subject to rigorous academic research. This paper presents some of the challenges associated with the...... establishment of design as a research discipline within civil and environmental engineering, some of the benefits and opportunities that will come from that establishment, and some evidence for the fact that this process has already begun.......There are a number of fields including architecture, industrial design, and urban planning and design, where design is the discipline upon which all research and teaching activities are based. In other fields such as aerospace and mechanical engineering, design is a sub-discipline with its own...

  15. EVALUATION FOR JUDGMENT CRITERIA OF REPAIR ON CIVIL ENGINEERING STRUCTURE BY SUPPORT VECTOR MACHINE

    Science.gov (United States)

    Yuki, Kazunori; Kobayashi, Hiroki; Ohishi, Hiroyuki; Sugimoto, Hiroyuki; Iida, Takeshi; Furukawa, Kohei

    In this study, setting method for judgment criteria for repair of civil engineering structures is analyzed by the use of inspection and repair record of expansion joint of bridges with the Support Vector Machine. The Support Vector Machine is a technique used to apply for setting of risk degree of disasters on natural slopes. However it is needed that effective exclusion method of noise data has to be considered to apply for the analysis of the setting method. Therefore the noise data is excluded objectively in order that high confidence data can be extracted from the record. In this way setting the method can be developed. As a result of this study, it can be shown that the setting method by Support Vector Machine is effective as a tool for maintenance management plan of civil engineering structures since the method has a high integrity with evaluation by professional engineer.

  16. Development and evaluation of a long range image-based monitoring system for civil engineering structures

    Science.gov (United States)

    Ehrhart, Matthias; Lienhart, Werner

    2015-04-01

    Today, many large-scale civil engineering structures are permanently monitored to provide early warnings and to initiate counter actions from structural failure. Total station measurements are commonly used to determine 3D movements of selected points with measurement intervals of several minutes or hours. However, these measurements do not provide information on the vibration behavior of the structures. For this purpose, other sensors like accelerometers have to be installed on the object. In this paper, we present a monitoring system based on a state of the art image assisted total station (IATS) suitable for the measurement of absolute 3D coordinates and the determination of the structure's natural frequencies. The 3D coordinates can be determined with an accuracy of a few millimeters using conventional total station measurements. For analyzing the structure's natural frequencies, the telescope camera of the IATS is used in combination with dedicated image processing techniques optimized for artificial and natural targets. While the determination of 3D coordinates based on total station measurements is common practice, the idea of using the total station's image data for frequency analysis is new. Consequently, investigations on the achievable performance are pending for commercially available products. We therefore evaluate the potential of this technique at a life-size footbridge by comparison with accelerometer measurements. We demonstrate that with our developed monitoring concept and state of the art hardware, accelerometer measurements can be replaced in several monitoring situations by IATS measurements and image processing techniques.

  17. The Use of MIVES as a Sustainability Assessment MCDM Method for Architecture and Civil Engineering Applications

    Directory of Open Access Journals (Sweden)

    Oriol Pons

    2016-05-01

    Full Text Available Environmental and sustainability assessment tools have an important role in moving towards a better world, bringing knowledge and raising awareness. In the architecture and civil engineering sector, these assessment tools help in moving forward to constructions that have less economic, environmental and social impacts. At present, there are numerous assessment tools and methods with different approaches and scopes that have been analyzed in numerous technical reviews. However, there is no agreement about which method should be used for each evaluation case. This research paper synthetically analyzes the main sustainability assessment methods for the construction sector, comparing their strengths and weaknesses in order to present the challenges of the Spanish Integrated Value Model for Sustainability Assessment (MIVES. MIVES is a Multi-Criteria Decision Making method based on the value function concept and the Seminars of experts. Then, this article analyzes MIVES advantages and weak points by going through its methodology and two representative applications. At the end, the area of application of MIVES is described in detail along with the general application cases of the main types of assessment tools and methods.

  18. Evaluation of GPR techniques for civil-engineering applications: study on a test site

    Science.gov (United States)

    Grandjean, G.; Gourry, J. C.; Bitri, A.

    2000-10-01

    Different ground-penetrating radar (GPR) techniques have been tested on the same site in order to establish the performance and reliability of this method when applied to civil-engineering problems. The Laboratoire Central des Ponts et Chaussées (LCPC) test site at Nantes, France, was selected because it includes most of the underground heterogeneities commonly found in urban contexts, such as pipes, small voids, etc. The GPR survey consisted in recording measurements in tomographic (surface to horizontal borehole measurements), monostatic (2D surface profiling) and bistatic (Common Mid Point [CMP]) modes above various buried heterogeneities. Different processing techniques were also performed, such as tomographic inversion, 2D and 3D migration, velocity analysis, as well as numerical simulations, the results of which can be summarized in three points. (1) Although the different filling materials of the site can be distinguished by velocity and attenuation tomography, the buried heterogeneities are more difficult to identify because of limited resolution related to angular aperture and Fresnel zone. (2) 2D surface profiling can detect the different shallow heterogeneities, such as pipes and voids, down to a depth of several meters. Additional processing, such as forward modeling and attenuation curve analysis, provides more quantitative information related to the medium. A comparison between 2D and 3D migrated data highlights the error introduced when the structures are considered to be perfectly cylindrical. (3) CMP analysis gives relatively good estimations of vertical velocity contrasts when the medium is layered. A lithologic log can be derived assuming that the velocity changes are related to material variations.

  19. Laser ultrasonics for civil engineering : some applications in development for concrete non destructive testing

    International Nuclear Information System (INIS)

    Non destructive testing of civil engineering infrastructures is becoming of primary importance for their diagnosis, residual time life estimation and/or structural health monitoring. A particularity of civil engineering application is the large size of the survey zones and the expected low cost of inspection. In this context non contact ultrasonics may offer the possibility to built robots that can automatically scan large areas (or eventually be integrated in moving vehicles) to recover mechanical properties of material or to perform imagery for geometrical information recovery. In this paper we present two possible applications of in situ laser ultrasonics : one is the detection of voids in tendon duct with the impact echo method, the other is the use of surface waves to recover mechanical properties of the first centimetres of concrete structures (here after called cover concrete).

  20. Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2006-01-01

    1.1 This practice covers the procedures for computing characteristic values of material properties of polymeric composite materials intended for use in civil engineering structural applications. The characteristic value is a statistically-based material property representing the 80 % lower confidence bound on the 5th-percentile value of a specified population. Characteristic values determined using this standard practice can be used to calculate structural member resistance values in design codes for composite civil engineering structures and for establishing limits upon which qualification and acceptance criteria can be based. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  1. Self-Regulated Learning Strategies Applied to Undergraduate, Graduate and Specialization Students from Civil Engineering

    Directory of Open Access Journals (Sweden)

    Jose Carlos Redaelli

    2013-03-01

    Full Text Available The current demand for civil engineering work requires new skills and knowledge and calls for new and effective learning methods. This paper shows self-regulated learning strategies applied to undergraduate, graduate and specialization students from Civil Engineering in a Brazilian University. A Scale of Evaluation of Learning Strategies was administered with a view to identifying students´ cognitive, metacognitive and dysfunctional learning strategies.

  2. DYNET project: DAAD joint curriculum development in civil engineering of University of Niš

    Directory of Open Access Journals (Sweden)

    Stojić Dragoslav

    2008-01-01

    Full Text Available DYNET Project has greatly contributed to the development of high engineering education at the University of Niš, since year 2000. This project has been financed by the German DAAD program, in the framework of the South East Europe Stability Pact, and the goal of the project is primarily development of high education in the region, and education of young engineers. The project began at the Ruhr University of Bochum (RUB in cooperation with the Universities of Niš (UN, Skopje and Sarajevo, and later expanded to other universities. The basis of cooperation is a very successful long term cooperation of two universities of RUB and UN, that dates back to 1975 and which has been managed by professor Guenther Schmid of the University of Bochum. A reform of the Curriculum was initiated at the Faculty of Civil Engineering and Architecture of Niš in 2000 and it has been officially underway for three years. The programs have been organized along the principles of the Bologna process. The studies are divided into three levels: Bachelor Studies, Master Studies, and Doctoral Studies. The programs of the studies comprise study fields such as bridges, tunnels, hydraulic engineering, road and rail networks or residential, commercial and industrial buildings. The paper promotes the benefits of the participation of the Faculty of Civil Engineering and Architecture of the University of Niš in the DYNET project, as well as the analysis and challenges which were present in the process of engineering education.

  3. A review on smart self-sensing composite materials for civil engineering applications

    OpenAIRE

    Sohel Rana; Subramani P; Raul Fangueiro; Antonio Gomes Correia

    2016-01-01

    Self-sensing composites are becoming highly attractive for civil engineering applications to improve the safety and performance of structures. These smart composites show a detectable change in their electrical resistivity with applied stress or strain and this unique characteristic make them useful for health monitoring of structures. Till date, different forms of carbon composites, i.e. short fibre, continuous fibre, particles, nano fibres, nanotubes, etc. have been utilized for this purpos...

  4. Polymer adhesives in civil engineering : effect of environmental parameters on thermomechanical properties

    OpenAIRE

    BENZARTI, K; Pastor, M.; CHAUSSADENT, T; THAVEAU, MP

    2002-01-01

    In this work, aging of two ambient curing thermoset polymers (an epoxy system and a plyester based mortar), commonly used for civil engineering applications, has been investigated. In a first part, microstructural evolutions of the adhesives in a standard environment (50% relative humidity, 20°C) were studied. The polymerization kinetics of the epoxy system was monitored by infrared spectroscopy and differential scanning calorimetry (DSC). These experiments showed that the crosslinking proces...

  5. Virtual Placements to Develop Employability Skills for Civil and Environmental Engineering Students

    OpenAIRE

    Parneet Paul

    2015-01-01

    This project work addresses the crucial need to encourage undergraduate civil and environmental engineering students to gain employment skills and training right from the start of their studies so that their overall employability increases; their confidence level in networking with industry and within the workplace increases; and so that they are successfully able to obtain employment after finishing their studies. This initiative is a stepping-stone employability exercise which focuses sp...

  6. Non-destructive testing in civil engineering (NDT-CE). Vol. 1. Lectures

    Energy Technology Data Exchange (ETDEWEB)

    Schickert, G. [ed.; Wiggenhauser, H. [ed.

    1995-12-31

    This volume contains about 100 lectures which were presented at the International Symposium on Non-Destructive Testing in Civil Engineering in Berlin. The topical sessions on NDT methods are dealing with: Structures, bridges; Simulation; Corrosion; Moisture; Magnetic and electrical methods; Interferometry; Quality control; Ultrasound; Building dynamics; Building inspection; Soils, piles, subsurface detection; Case studies; Impact echo; Materials; Monitoring; Acoustic emission, Electro acoustics; Historical monuments, masonry; Radar; IR-thermography, radiation; Reinforcements. (MM) (MM)

  7. The development of quality assurance and quality management in civil engineering

    International Nuclear Information System (INIS)

    The paper describes the development of Quality Assurance and Quality Management during construction at the Sizewell-B power plant from the lead provided in the Client's documentation. The hard lessons learnt from dealing with major suppliers and sub-contractors are explained. The paper concludes by describing the ways in which total Quality Management is now addressed within Laings Civil Engineering following the experiences at Sizewell and elsewhere. (author)

  8. BIM Promotion Plan in Civil Engineering through the Analysis of the User Recognition Changes

    OpenAIRE

    Ki Beom Ju; Myoung Bae Seo

    2013-01-01

    BIM, which recently emerged as a hot issue in the construction industry, is being recognized as a new breakthrough for the industry. However it is now in crisis due to the stagnant construction business and the decrease in the amount of orders. Already, various studies are being conducted to introduce BIM to architecture both domestically and abroad, but in civil engineering projects, unlike in construction projects, the work system is non-repetitive, horizontal, and atyp...

  9. The Post Cold War Civil Engineer Corps : what has changed and why

    OpenAIRE

    Ammons, Tony L

    1997-01-01

    Approved for public release; distribution is unlimited With the end of the Cold War the military services have experienced significant cuts in endstrength. Within the Navy, the Civil Engineer Corps (CEC) has also experienced some reductions. This thesis sought to determine how CEC endstrength is derived and whether it declined commensurate with overall naval officer endstrength. The command and billet structures for the CEC in 1986 and 1996 were used to represent the Cold War and Post Cold...

  10. Proposal of a theoretical competence-based model in a Civil Engineering degree

    OpenAIRE

    Fernández Sánchez, Gonzalo; Bernardo Pérez, María Olga; Castillejo, A.; Manzanero, Ana María; Esteban Gabriel, Jesús

    2014-01-01

    This paper summarizes the state of knowledge in relation to advances in education for sustainable development focused on higher education and in generic competencies, reviewing some of the existing proposals in the literature and analyzing other university approaches. It has focused on the curricula, applying a participatory methodology based on surveys and expert consultation for the identification and selection of generic competencies related to sustainability in a civil engineering degree ...

  11. A review of distributed optical fiber sensors for civil engineering applications

    OpenAIRE

    António Barrias; Casas, Joan R.; Sergi Villalba

    2016-01-01

    The application of structural health monitoring (SHM) systems to civil engineering structures has been a developing studied and practiced topic, that has allowed for a better understanding of structures’ conditions and increasingly lead to a more cost-effective management of those infrastructures. In this field, the use of fiber optic sensors has been studied, discussed and practiced with encouraging results. The possibility of understanding and monitor the distributed behavior of extensive s...

  12. A Review of Distributed Optical Fiber Sensors for Civil Engineering Applications

    OpenAIRE

    António Barrias; Casas, Joan R., ed. lit.; Sergi Villalba

    2016-01-01

    The application of structural health monitoring (SHM) systems to civil engineering structures has been a developing studied and practiced topic, that has allowed for a better understanding of structures’ conditions and increasingly lead to a more cost-effective management of those infrastructures. In this field, the use of fiber optic sensors has been studied, discussed and practiced with encouraging results. The possibility of understanding and monitor the distributed behavior of extensive s...

  13. Vibration Based Damage Assessment of a Civil Engineering Structures using a Neural Networks

    OpenAIRE

    Kirkegaard, Poul Henning; Rytter, A.

    1994-01-01

    In this paper the possibility of using a Multilayer Perceptron (MLP) network trained with the Backpropagation Algorith as a non-destructive damage assessment technique to locate and quantify a damage in Civil Engineering structures is investigated. Since artificial neural networks are proving to be an effective tool for pattern recognition, the basic idea is to train a neural network with simulated values of modal parameters in order to recognize the behaviour of the damaged as well as the un...

  14. Airborne remote sensors applied to engineering geology and civil works design investigations

    Science.gov (United States)

    Gelnett, R. H.

    1975-01-01

    The usefulness of various airborne remote sensing systems in the detection and identification of regional and specific geologic structural features that may affect the design and location of engineering structures on major civil works projects is evaluated. The Butler Valley Dam and Blue Lake Project in northern California was selected as a demonstration site. Findings derived from the interpretation of various kinds of imagery used are given.

  15. Web-based Peer Assessment: A Case Study with Civil Engineering Students

    OpenAIRE

    Gonçalo Cruz; Caroline Dominguez; Ana Maia; Daniela Pedrosa; Gordon Grams

    2013-01-01

    Peer-assessed online collaborative writing is of growing importance for higher education. Based on the quantitative and qualitative analysis of collected data, this work presents the results of a case study in a graduate civil engineering course at the University of Trás-os-Montes e Alto Douro, Vila Real, Portugal. After an overall presentation of the learning activity, it examines students’ attitudes towards web-based peer assessment and identifies which factors are rela...

  16. Chemical characterisation of dredged sediments in relation to their potential use in civil engineering.

    Science.gov (United States)

    Zuliani, Tea; Mladenovič, Ana; Ščančar, Janez; Milačič, Radmila

    2016-04-01

    During capital and/or maintenance dredging operations, large amounts of material are produced. Instead of their discharge, dredged sediments may be a valuable natural resource if not contaminated. One of the possible areas of application is civil engineering. In the present work, the environmental status of seaport dredged sediment was evaluated in order to investigate its potential applicability as a secondary raw material. Sediments were analysed for element concentrations in digested samples, aqueous extracts and fractions from sequential extraction; for fluoride, chloride and sulphate concentrations in aqueous extracts; and for tributyltin (TBT). Granulometric and mineralogical compositions were also analysed. The elemental impact was evaluated by calculation of the enrichment factors. The total element concentrations determined showed moderate contamination of the dredged sediments as was confirmed also by their moderate enrichment factors, presumably as a result of industrial and port activities. Elemental concentrations in the aqueous extract were very low and therefore do not represent any hazard for the environment. The water-soluble element concentrations were under the threshold levels set by the EU Directive on the landfill of waste, on the basis of which the applicability of dredged sediments in civil engineering is evaluated, while the content of chloride and sulphate were above the threshold levels. It was found out that due to the large amounts of sediment available, civil engineering applications such as the construction of embankments and backfilling is the most beneficial recycling solution at present. PMID:27000319

  17. Civil engineering at the crossroads in the twenty-first century.

    Science.gov (United States)

    Ramírez, Francisco; Seco, Andres

    2012-12-01

    The twenty-first century presents a major challenge for civil engineering. The magnitude and future importance of some of the problems perceived by society are directly related to the field of the civil engineer, implying an inescapable burden of responsibility for a group whose technical soundness, rational approach and efficiency is highly valued and respected by the citizen. However, the substantial changes in society and in the way it perceives the problems that it considers important call for a thorough review of our structures, both professional and educational; so that our profession, with its undeniable historical prestige, may modernize certain approaches and attitudes in order to continue to be a reliable instrument in the service of society, giving priority from an ethical standpoint to its actions in pursuit of "the public good". It possesses important tools to facilitate this work (new technologies, the development of communications, the transmission of scientific thought.···); but there is nevertheless a need for deep reflection on the very essence of civil engineering: what we want it to be in the future, and the ability and willingness to take the lead at a time when society needs disinterested messages, technically supported, reasonably presented and dispassionately transmitted. PMID:21380736

  18. Reprint of : Quantum point contacts as heat engines

    Science.gov (United States)

    Pilgram, Sebastian; Sánchez, David; López, Rosa

    2016-08-01

    The efficiency of macroscopic heat engines is restricted by the second law of thermodynamics. They can reach at most the efficiency of a Carnot engine. In contrast, heat currents in mesoscopic heat engines show fluctuations. Thus, there is a small probability that a mesoscopic heat engine exceeds Carnot's maximum value during a short measurement time. We illustrate this effect using a quantum point contact as a heat engine. When a temperature difference is applied to a quantum point contact, the system may be utilized as a source of electrical power under steady state conditions. We first discuss the optimal working point of such a heat engine that maximizes the generated electrical power and subsequently calculate the statistics for deviations of the efficiency from its most likely value. We find that deviations surpassing the Carnot limit are possible, but unlikely.

  19. University's civil and environmental engineering department uses art and renovated space to honor victims of April 16, 2007

    OpenAIRE

    Nystrom, Lynn A.

    2009-01-01

    The summer 2009 dedication of renovated space on the second floor of Patton Hall, home to several of the civil and environmental engineering students who lost their lives on April 16, 2007, as well as their professor G.V. Loganathan, "was the culmination of two years of effort in the department to honor the victims," said William A. Knocke, civil and environmental engineering professor and department head.

  20. Analysis of the acquired subject-specific competences at the university studies of civil engineering in communal course

    OpenAIRE

    Leban, Kaja

    2015-01-01

    The purpose of the thesis is to analyze the acquired subject-specific competences at the study of university level of civil engineering – communal course. We are interested in particular if the subject-specific competences which the graduates acquire are appropriate, have enough depth and if they meet their expectations and also meet the demands and expectations of the job market. The assumed working hypothesis is that graduates at the university level of civil engineering – communal course –...

  1. Image restoration for civil engineering structure monitoring using imaging system embedded on UAV

    Science.gov (United States)

    Vozel, Benoit; Dumoulin, Jean; Chehdi, Kacem

    2013-04-01

    Nowadays, civil engineering structures are periodically surveyed by qualified technicians (i.e. alpinist) operating visual inspection using heavy mechanical pods. This method is far to be safe, not only for civil engineering structures monitoring staff, but also for users. Due to the unceasing traffic increase, making diversions or closing lanes on bridge becomes more and more difficult. New inspection methods have to be found. One of the most promising technique is to develop inspection method using images acquired by a dedicated monitoring system operating around the civil engineering structures, without disturbing the traffic. In that context, the use of images acquired with an UAV, which fly around the structures is of particular interest. The UAV can be equipped with different vision system (digital camera, infrared sensor, video, etc.). Nonetheless, detection of small distresses on images (like cracks of 1 mm or less) depends on image quality, which is sensitive to internal parameters of the UAV (vibration modes, video exposure times, etc.) and to external parameters (turbulence, bad illumination of the scene, etc.). Though progresses were made at UAV level and at sensor level (i.e. optics), image deterioration is still an open problem. These deteriorations are mainly represented by motion blur that can be coupled with out-of-focus blur and observation noise on acquired images. In practice, deteriorations are unknown if no a priori information is available or dedicated additional instrumentation is set-up at UAV level. Image restoration processing is therefore required. This is a difficult problem [1-3] which has been intensively studied over last decades [4-12]. Image restoration can be addressed by following a blind approach or a myopic one. In both cases, it includes two processing steps that can be implemented in sequential or alternate mode. The first step carries out the identification of the blur impulse response and the second one makes use of this

  2. Civil engineering: EDF needs for concrete modelling; Genie civile: analyse des besoins EDF en modelisation du comportement des betons

    Energy Technology Data Exchange (ETDEWEB)

    Didry, O.; Gerard, B.; Bui, D. [Electricite de France (EDF), Direction des Etudes et Recherches, 92 - Clamart (France)

    1997-12-31

    Concrete structures which are encountered at EDF, like all civil engineering structures, age. In order to adapt the maintenance conditions of these structures, particularly to extend their service life, and also to prepare constructions of future structures, tools for predicting the behaviour of these structures in their environment should be available. For EDF the technical risks are high and consequently very appropriate R and D actions are required. In this context the Direction des Etudes et Recherches (DER) has developed a methodology for analysing concrete structure behaviour modelling. This approach has several aims: - making a distinction between the problems which refer to the existing models and those which require R and D; - displaying disciplinary links between different problems encountered on EDF structures (non-linear mechanical, chemical - hydraulic - mechanical coupling, etc); - listing of the existing tools and positioning the DER `Aster` finite element code among them. This document is a state of the art of scientific knowledge intended to shed light on the fields in which one should be involved when there is, on one part a strong requirement on the side of structure operators, and on the other one, the present tools do not allow this requirement to be satisfactorily met. The analysis has been done on 12 scientific subjects: 1) Hydration of concrete at early ages: exothermicity, hardening, autogenous shrinkage; 2) Drying and drying shrinkage; 3) Alkali-silica reaction and bulky stage formation; 4) Long term deterioration by leaching; 5) Ionic diffusion and associated attacks: the chlorides case; 6) Permeability / tightness of concrete; 7) Concretes -nonlinear behaviour and cracking (I): contribution of the plasticity models; 8) Concretes - nonlinear behaviour and cracking (II): contribution of the damage models; 9) Concretes - nonlinear behaviour and cracking (III): the contribution of the probabilistic analysis model; 10) Delayed behaviour of

  3. Potential of geodetic surveying as a guide for civil engineers in monitoring structural deformations

    Science.gov (United States)

    Nassar, Mohamed M.; El-Maghraby, Mohamed F.

    1988-03-01

    In a previous research performed by the senior author, the causes and implications of the earth's crustal movements in the Egyptian territory have been investigated. The reason was the increasing tendency of erecting huge engineering constructions in Egypt, like dams, bridges, towers, tunnels, nuclear power stations,… etc.). Such constructions, of course, represent a major part in the national economy, and hence, their safety is essential for both economical purposes as well as human security. The objective of this paper is to study the potential and resolution of geodetic surveying techniques in detecting the horizontal and vertical movements of different types of engineering constructions. This aims to help civil engineers monitor structural deformations during and after construction using precise geodetic surveying techniques, in order to overcome and master any defects due to local crustal movements and/or erection systems. The most suitable surveying technique for each type of structure is treated and analyzed for optimum results.

  4. News in engineering education in Spain effective from 2010 in presence of external changes and mixed crisis, looking mostly to agro and civil engineers.

    OpenAIRE

    Antón Corrales, José Manuel; Grau Olive, Juan Bautista; Tarquis Alfonso, Ana Maria; Andina de la Fuente, Diego; Sanchez Oreja, Maria Elena

    2012-01-01

    The engineering careers models were diverse in Europe, and are adopting now in Spain the Bolonia process for European Universities. Separated from older Universities, that are in part technically active, Civil Engineering (Caminos, Canales y Puertos) started at end of 18th century in Spain adopting the French models of Upper Schools for state civil servants with exam at entry. After 1800 intense wars, to conserve forest regions Ingenieros de Montes appeared as Upper School, and in 1855 also t...

  5. Reversibility: An Engineer's Point of View

    International Nuclear Information System (INIS)

    Reversibility is the most consistent option in a democratic country. However reversibility may also have several drawbacks which must be identified and mitigated. Reversibility of a geological repository is a relatively new idea in France. The 1991 law dedicated to nuclear waste management considered reversibility as a possible option. Fifteen years later, the 2006 law mandated that a deep repository must be reversible and that the exact content of this notion should be defined by a new law to be discussed by the Parliament in 2015. Reversibility was not a concern put forward by engineers. It clearly originated from a societal demand sponsored and formulated by the Parliament. Since 1991, the exact meaning of this mandate progressively became more precise. In the early days, reversibility meant the technical and financial capability to retrieve the wastes from the repository, at least for some period of time after being emplaced. Progressively, a broader definition, suggested by Andra, was accepted: reversibility also means that a disposal facility should be operated in such a way that a stepwise decision-making process is possible. At each step, society must be able to decide to proceed to the next step, to pause or to reverse a step. Several benefits can be expected from a reversible repository. Some technical safety concerns may be only recognised after waste emplacement. Radioactive wastes may become a resource whose recoverability is desirable. Regulations may change, alternative waste treatment or better disposal techniques may be developed, or the need to modify a component of the facility may arise. Looking back at how chemical or domestic wastes were managed some 50 years ago easily underscores that it is not unreasonable to hope for significant advances in the future. For scientists and engineers, reversibility proves to have several other merits. To design and build a good repository, time is needed. The operator of a mine or of an oil field knows that

  6. Infrared Emissivity Measurements of Building and Civil Engineering Materials: A New Device for Measuring Emissivity

    Science.gov (United States)

    Monchau, Jean-Pierre; Marchetti, Mario; Ibos, Laurent; Dumoulin, Jean; Feuillet, Vincent; Candau, Yves

    2014-10-01

    The knowledge of the infrared emissivity of materials used in buildings and civil engineering structures is useful for two specific approaches. First, quantitative diagnosis of buildings or civil engineering infrastructures by infrared thermography requires emissivity values in the spectral bandwidth of the camera used for measurements, in order to obtain accurate surface temperatures; for instance, emissivity in the band III domain is required when using cameras with uncooled detectors (such as micro-bolometer arrays). Second, setting up accurate thermal balances by numerical modeling requires the total emissivity value for a large wavelength domain; this is, for instance, the case for computing the road surface temperature to predict ice occurrence. Furthermore, periodical surveys of emissivity variations due to aging or soiling of surfaces could be useful in many situations such as thermal mapping of roads or building insulation diagnosis. The use of portable emissivity measurement devices is required for that purpose. A device using an indirect measurement method was previously developed in our lab; the method uses measurement of the reflectivity from a modulated IR source and requires calibration with a highly reflective surface. However, that device uses a low-frequency, thermal modulation well adapted to laboratory measurements but unfit for fast and in situ measurements. Therefore, a new, portable system which retains the principle of an indirect measurement but uses a faster-frequency, mechanical modulation more appropriate to outdoor measurements was developed. Both devices allow measurements in the broad m to m) and narrow m to m) bands. Experiments were performed on a large number of materials commonly used in buildings and civil engineering structures. The final objective of this work is to build a database of emissivity of these materials. A comparison of laboratory and on-site measurements of emissivity values obtained in both spectral bands will be

  7. Modelling Transient Air-water Flows in Civil and Environmental Engineering

    OpenAIRE

    Kerger, François

    2010-01-01

    The present text, submitted to the University of Liège in fulfillment of the requirements for the degree of “Docteur en Sciences de l’Ingénieur”, aims at improving the understanding and description of air‐water interactions in transient flows. A particular emphasis is set on phenomena relevant in civil and environmental engineering, like rivers, pipes, and hydraulic structures. Theoretical results of this doctoral research may be summarized in two main propositions. First, I show that any...

  8. Design of the Curriculum for a Second-Cycle Course in Civil Engineering in the Context of the Bologna Framework

    Science.gov (United States)

    Gavin, K. G.

    2010-01-01

    This paper describes the design of the curriculum for a Master of Engineering programme in civil engineering at University College Dublin. The revised programme was established to meet the requirements of the Bologna process and this paper specifically considers the design of a new, second-cycle master's component of the programme. In addition to…

  9. Long-term lining performance - Civil engineering problem of potential retrieval of buried spent nuclear fuel

    International Nuclear Information System (INIS)

    The current solution for the spent fuel, high-level and long-lived radioactive waste is to store them at surface facilities from which they will be subsequently moved to a deep repository. No such repositories are in operation currently but several such facilities are close to the construction phase. A deep repository can be situated in several types of geological conditions including clay formations, salt sediments, argillites and tuffitic and granitic rocks. The character of the host rock is the key factor determining the design and specific requirements of individual components of such a facility. The future potential retrieval of canisters containing nuclear waste from the repository is a further influential factor. The reason for retrieval of containers lies in the development of fast reactors and increased interest for spent fuel reprocessing. Naturally, the decision as to whether retrievability is technically feasible must be made before finalising the design and construction process of the repository. If the decision is made to retrieve, a design which will include all the relevant safety aspects for the potential retrieval of canisters must be determined. The lay-out of the repository, the materials to be used and the design of the various structures of the facility (e.g. access tunnels, disposal shafts, buffer and backfill) are not the only issues to be addressed. The long-term stability of the system as a whole, i.e. of all the components, is crucial. Depending on the disposal concept chosen, the thermal load generated by the waste in the disposal container, saturation by water from the surrounding environment and the loading of the host rock massif will constitute the main processes which will affect the behaviour, safety and future functioning of the repository from the civil engineering point of view. The long-term stability of the lining of disposal galleries is a basic precondition for the safe removal of spent nuclear waste from deep underground

  10. Long-term lining performance - Civil engineering problem of potential retrieval of buried spent nuclear fuel

    Energy Technology Data Exchange (ETDEWEB)

    Vasicek, Radek, E-mail: radek.vasicek@fsv.cvut.c [Czech Technical University in Prague, Faculty of Civil Engineering, Centre of Experimental Geotechnics, Thakurova 7, 16629 Prague 6 (Czech Republic); Svoboda, Jiri, E-mail: jiri.svoboda@seznam.c [Czech Technical University in Prague, Faculty of Civil Engineering, Centre of Experimental Geotechnics, Thakurova 7, 16629 Prague 6 (Czech Republic)

    2011-04-15

    The current solution for the spent fuel, high-level and long-lived radioactive waste is to store them at surface facilities from which they will be subsequently moved to a deep repository. No such repositories are in operation currently but several such facilities are close to the construction phase. A deep repository can be situated in several types of geological conditions including clay formations, salt sediments, argillites and tuffitic and granitic rocks. The character of the host rock is the key factor determining the design and specific requirements of individual components of such a facility. The future potential retrieval of canisters containing nuclear waste from the repository is a further influential factor. The reason for retrieval of containers lies in the development of fast reactors and increased interest for spent fuel reprocessing. Naturally, the decision as to whether retrievability is technically feasible must be made before finalising the design and construction process of the repository. If the decision is made to retrieve, a design which will include all the relevant safety aspects for the potential retrieval of canisters must be determined. The lay-out of the repository, the materials to be used and the design of the various structures of the facility (e.g. access tunnels, disposal shafts, buffer and backfill) are not the only issues to be addressed. The long-term stability of the system as a whole, i.e. of all the components, is crucial. Depending on the disposal concept chosen, the thermal load generated by the waste in the disposal container, saturation by water from the surrounding environment and the loading of the host rock massif will constitute the main processes which will affect the behaviour, safety and future functioning of the repository from the civil engineering point of view. The long-term stability of the lining of disposal galleries is a basic precondition for the safe removal of spent nuclear waste from deep underground

  11. NDT (Non Destructive Testing) in Civil Engineering: Structural Integrity of Concrete Inspection Project

    International Nuclear Information System (INIS)

    Reinforced concrete is often used as the main material for the construction of civil engineering structures because it is able to meet all three criteria's of critical engineering; cost, time and safety. Climate and environment in Malaysia mainly for building structures on the sea is very challenging and can interfere with the durability of concrete in their lifetime. The durability of concrete is closely related to security issues and this paper describes the use of NDT for inspection of the structural integrity of the concrete, aged 20 years in one of the Oil Plant in Kerteh, Terengganu. The techniques used in this inspection is visual inspection, concrete cover meter, half cell potential, rebound hammer, ultrasonic instrument, concrete coring, testing carbonation and chloride test. These techniques provide the corrosion of reinforcement, the compressive strength of concrete, the reinforcement, in response to the current state of chloride and concrete to enable further analysis is performed maintenance recommendations. (author)

  12. Operational modal analysis of civil engineering structures an introduction and guide for applications

    CERN Document Server

    Rainieri, Carlo

    2014-01-01

    This book covers all aspects of operational modal analysis for civil engineering, from theoretical background to applications, including measurement hardware, software development, and data processing. In particular, this book provides an extensive description and discussion of OMA methods, their classification and relationship, and advantages and drawbacks. The authors cover both the well-established theoretical background of OMA methods and the most recent developments in the field, providing detailed examples to help the reader better understand the concepts and potentialities of the technique. Additional material is provided (data, software) to help practitioners and students become familiar with OMA. Covering a range of different aspects of OMA, always with the application in mind, the practical perspective adopted in this book makes it ideal for a wide range of readers from researchers to field engineers; graduate and undergraduate students; and technicians interested in structural dynamics, system iden...

  13. Discovery Mondays: 'The civil engineering genius of the 100-metre deep underground caverns'

    CERN Multimedia

    2004-01-01

    CERN is first and foremost a place where physicists study particle collisions. But to be able to observe the infinitely small, they need huge pieces of equipment, the accelerators and detectors, whose construction, some 100 metres below the earth's surface calls on the services of other fascinating disciplines. Take civil engineering, for example. For the construction of the LHC some 420 000 cubic metres of rock have had to be excavated for the 6500 metres of tunnel, 6 new shafts and 32 underground chambers and caverns. To avoid disrupting other experiments in progress, the work on these exceptional structures has had to be done without creating vibrations. The ATLAS experiment hall, a huge cathedral-like structure 100 metres below ground, is another mind-blowing feat of civil engineering. Its construction involved the use of ground-breaking technology, such as the system for suspending the ceiling put in place during the excavation work. At the next Discovery Monday, the specialists responsible for...

  14. Image-based dynamic deformation monitoring of civil engineering structures from long ranges

    Science.gov (United States)

    Ehrhart, Matthias; Lienhart, Werner

    2015-02-01

    In this paper, we report on the vibration and displacement monitoring of civil engineering structures using a state of the art image assisted total station (IATS) and passive target markings. By utilizing the telescope camera of the total station, it is possible to capture video streams in real time with 10fps and an angular resolution of approximately 2″/px. Due to the high angular resolution resulting from the 30x optical magnification of the telescope, large distances to the object to be monitored are possible. The laser distance measurement unit integrated in the total station allows to precisely set the camera's focus position and to relate the angular quantities gained from image processing to units of length. To accurately measure the vibrations and displacements of civil engineering structures, we use circular target markings rigidly attached to the object. The computation of the targets' centers is performed by a least squares adjustment of an ellipse according to the Gauß-Helmert model from which the parameters of the ellipse and their standard deviations are derived. In laboratory experiments, we show that movements can be detected with an accuracy of better than 0.2mm for single frames and distances up to 30m. For static applications, where many video frames can be averaged, accuracies of better than 0.05mm are possible. In a field test on a life-size footbridge, we compare the vibrations measured by the IATS to reference values derived from accelerometer measurements.

  15. A Review of Distributed Optical Fiber Sensors for Civil Engineering Applications

    Science.gov (United States)

    Barrias, António; Casas, Joan R.; Villalba, Sergi

    2016-01-01

    The application of structural health monitoring (SHM) systems to civil engineering structures has been a developing studied and practiced topic, that has allowed for a better understanding of structures’ conditions and increasingly lead to a more cost-effective management of those infrastructures. In this field, the use of fiber optic sensors has been studied, discussed and practiced with encouraging results. The possibility of understanding and monitor the distributed behavior of extensive stretches of critical structures it’s an enormous advantage that distributed fiber optic sensing provides to SHM systems. In the past decade, several R & D studies have been performed with the goal of improving the knowledge and developing new techniques associated with the application of distributed optical fiber sensors (DOFS) in order to widen the range of applications of these sensors and also to obtain more correct and reliable data. This paper presents, after a brief introduction to the theoretical background of DOFS, the latest developments related with the improvement of these products by presenting a wide range of laboratory experiments as well as an extended review of their diverse applications in civil engineering structures. PMID:27223289

  16. High performance steels for civil engineering and building structure uses; Doboku kenchiku kozoyo shinkokino kozai

    Energy Technology Data Exchange (ETDEWEB)

    Kawabata, F.; Yoshizato, T.; Tanigawa, O. [Kawasaki Steel Corp., Tokyo (Japan)

    1996-03-01

    This paper describes the new functions of steels developed for civil engineering and building structure uses with the progress of each requirement function and the features of metallic control and introduces the features of an industrial manufacturing method and the mechanical properties. Low YR high strength steel, ultra-low yield steel, fire-resistant steel, low preheat-type HT780 steel, heavy-wall H-type TMCP steel, and tapered plates were introduced in material quality and microstructure control as a high-performance steel for civil engineering and building structure uses. The functions of steel represented by low YR characteristics are materialized by the control of yielding behavior, and high strength steel of 600 N/mm{sup 2} class has been developed by composite microstructure control. Moreover, the technology for deteriorating the weld cracking sensitivity that hinders the application of high strength steel exceeding 780 N/mm{sup 2} is obtained by using a thermo-mechanical control process (TMCP) effectively and positively. This technology satisfies the needs of its thickness and high strength as viewed in the HT780 steel for a bridge or the heavy-wall H-type steel. 11 refs., 9 figs., 13 tabs.

  17. A Review of Distributed Optical Fiber Sensors for Civil Engineering Applications

    Directory of Open Access Journals (Sweden)

    António Barrias

    2016-05-01

    Full Text Available The application of structural health monitoring (SHM systems to civil engineering structures has been a developing studied and practiced topic, that has allowed for a better understanding of structures’ conditions and increasingly lead to a more cost-effective management of those infrastructures. In this field, the use of fiber optic sensors has been studied, discussed and practiced with encouraging results. The possibility of understanding and monitor the distributed behavior of extensive stretches of critical structures it’s an enormous advantage that distributed fiber optic sensing provides to SHM systems. In the past decade, several R & D studies have been performed with the goal of improving the knowledge and developing new techniques associated with the application of distributed optical fiber sensors (DOFS in order to widen the range of applications of these sensors and also to obtain more correct and reliable data. This paper presents, after a brief introduction to the theoretical background of DOFS, the latest developments related with the improvement of these products by presenting a wide range of laboratory experiments as well as an extended review of their diverse applications in civil engineering structures.

  18. A Review of Distributed Optical Fiber Sensors for Civil Engineering Applications.

    Science.gov (United States)

    Barrias, António; Casas, Joan R; Villalba, Sergi

    2016-01-01

    The application of structural health monitoring (SHM) systems to civil engineering structures has been a developing studied and practiced topic, that has allowed for a better understanding of structures' conditions and increasingly lead to a more cost-effective management of those infrastructures. In this field, the use of fiber optic sensors has been studied, discussed and practiced with encouraging results. The possibility of understanding and monitor the distributed behavior of extensive stretches of critical structures it's an enormous advantage that distributed fiber optic sensing provides to SHM systems. In the past decade, several R & D studies have been performed with the goal of improving the knowledge and developing new techniques associated with the application of distributed optical fiber sensors (DOFS) in order to widen the range of applications of these sensors and also to obtain more correct and reliable data. This paper presents, after a brief introduction to the theoretical background of DOFS, the latest developments related with the improvement of these products by presenting a wide range of laboratory experiments as well as an extended review of their diverse applications in civil engineering structures. PMID:27223289

  19. A PARTNERSHIP OF LECTURERS AS A NEW ORGANIZATIONAL FORM OF CIVIL ENGINEERING EDUCATION IN MOSCOW IN THE EARLY 20th CENTURY

    OpenAIRE

    Panteleeva Tatyana Leonidovna

    2012-01-01

    The article based on unpublished archived documents deals with the history of the first civil engineering colleges in Moscow. They served as the foundation of professional training in civil engineering. Many distinguished persons, well-known as the founders of academic schools started their careers there. The first civil engineering college in Moscow, founded by M.K. Priorov in 1905, enjoyed high enrolment rates due to the growing needs in skilled builders. However, officers of...

  20. GPR applications in Civil Engineering in Spain - state-of-the-art

    Science.gov (United States)

    Pérez Gracia, Vega; Solla, Mercedes; Santos-Assunçao, Sonia; Lorenzo, Henrique

    2014-05-01

    GPR was introduced in Spain in 1990, and the first significant work was the PhD thesis of H. Lorenzo in 1994. Due to its versatile applicability, the employ has been increased and actually, GPR is extensively used in detection of pipes, wiring and urban services mainly. During the last years, this method was also widely utilized in the detection of graves from the civil war and in forensic studies, with irregular results. It was also commonly applied in archaeology. Actually exists more than 20 private companies offering geotechnical services by means of GPR. Also, several public institutions as Universities and Research Institutes base part of their research in GPR or in GPR applications. Notwithstanding, no training courses of specific formation on GPR is offered, but in several doctorate programs it is possible to work with GPR. Also, in many schools, GPR is part of the geophysical formation of graduate students. However, no national guidelines and rules exist, and each company defines the investigation protocols. Nevertheless, one of the aims of the Comisión Española de Geodesia y Geofísica (Spanish Committee for Geodesy and Geophysics) is to define guidelines for the GPR studies. Probably, the existence of national guidelines or perhaps European guidelines could be the most effective way to promote the responsible use of GPR in different domains. On the other hand, perhaps recommendations on the use of combined methodologies could be a practical way to persuade in the application of geophysical non-destructive technologies. The CEDEX, Centro de Estudios y Experimentación de Obras Públicas (Center for Studies and Experimentation in Civil Engineering), which is a civil engineering research agency in Spain, offers different test sites to calibrate and evaluate the method. It is an autonomous organization, organically ascribed at present to the Ministry of Fomento, and functionally ascribed to the Ministries of Fomento and Medioambiente of Spain, giving

  1. 土木工程质量管理研究%Study on Quality Management of Civil Engineering

    Institute of Scientific and Technical Information of China (English)

    戚甘红

    2012-01-01

    本文主要结合笔者多年来从事土木工程工作的工作经验,首先对土木工程的质量管理内涵做了简要的阐述,在此基础上,对土木工程相关阶段的质量管理进行探讨,以期能提高工程的整体质量.%This paper combines author's many years' working experience in civil engineering, expounds the meaning of quality management in civil engineering briefly, on this basis, explores the quality management of related stage in civil engineering, so as to improve the overall quality of project.

  2. Point defect engineering strategies to retard phosphorous diffusion in germanium

    KAUST Repository

    Tahini, H. A.

    2013-01-01

    The diffusion of phosphorous in germanium is very fast, requiring point defect engineering strategies to retard it in support of technological application. Density functional theory corroborated with hybrid density functional calculations are used to investigate the influence of the isovalent codopants tin and hafnium in the migration of phosphorous via the vacancy-mediated diffusion process. The migration energy barriers for phosphorous are increased significantly in the presence of oversized isovalent codopants. Therefore, it is proposed that tin and in particular hafnium codoping are efficient point defect engineering strategies to retard phosphorous migration. © the Owner Societies 2013.

  3. Ten Engineers Reading: Disjunctions between Preference and Practice in Civil Engineering Faculty Responses

    Science.gov (United States)

    Taylor, Summer Smith; Patton, Martha D.

    2006-01-01

    Previous research has indicated that engineering faculty do not follow best practices when commenting on students' technical writing. However, it is unclear whether the faculty prefer to comment in these ineffective ways, or whether they prefer more effective practices but simply do not enact them. This study adapts a well known study of response…

  4. Laser pointing in the vicinity of jet engine plumes

    NARCIS (Netherlands)

    Schleijpen, H.M.A.

    2009-01-01

    Target tracking and laser-based pointing from airborne platforms can be degraded significantly by the propagation environment around an airborne platform including zones of severe turbulence generated by rotor downwash and engine exhausts. This is the topic of the EDA study group ERG 108.019 on "Las

  5. Laser pointing in the vicinity of jet engine plumes

    NARCIS (Netherlands)

    Schleijpen, H.M.A.

    2010-01-01

    Target tracking and laser-based pointing from airborne platforms can be degraded significantly by the propagation environment around an airborne platform including zones of severe turbulence generated by rotor downwash and engine exhausts. This is the topic of the EDA study group ERG 108.019 on “Las

  6. Knowledge, attitude and practices for design for safety: A study on civil & structural engineers.

    Science.gov (United States)

    Goh, Yang Miang; Chua, Sijie

    2016-08-01

    Design for safety (DfS) (also known as prevention through design, safe design and Construction (Design and Management)) promotes early consideration of safety and health hazards during the design phase of a construction project. With early intervention, hazards can be more effectively eliminated or controlled leading to safer worksites and construction processes. DfS is practiced in many countries, including Australia, the UK, and Singapore. In Singapore, the Manpower Ministry enacted the DfS Regulations in July 2015, which will be enforced from August 2016 onwards. Due to the critical role of civil and structural (C&S) engineers during design and construction, the DfS knowledge, attitude and practices (KAP) of C&S engineers have significant impact on the successful implementation of DfS. Thus, this study aims to explore the DfS KAP of C&S engineers so as to guide further research in measuring and improving DfS KAP of designers. During the study, it was found that there is a lack of KAP studies in construction management. Therefore, this study also aims to provide useful lessons for future applications of the KAP framework in construction management research. A questionnaire was developed to assess the DfS KAP of C&S engineers. The responses provided by 43 C&S engineers were analyzed. In addition, interviews with experienced construction professionals were carried out to further understand perceptions of DfS and related issues. The results suggest that C&S engineers are supportive of DfS, but the level of DfS knowledge and practices need to be improved. More DfS guidelines and training should be made available to the engineers. To ensure that DfS can be implemented successfully, there is a need to study the contractual arrangements between clients and designers and the effectiveness of different implementation approaches for the DfS process. The questionnaire and findings in this study provided the foundation for a baseline survey with larger sample size, which is

  7. Methodology to improve design of accelerated life tests in civil engineering projects.

    Directory of Open Access Journals (Sweden)

    Jing Lin

    Full Text Available For reliability testing an Energy Expansion Tree (EET and a companion Energy Function Model (EFM are proposed and described in this paper. Different from conventional approaches, the EET provides a more comprehensive and objective way to systematically identify external energy factors affecting reliability. The EFM introduces energy loss into a traditional Function Model to identify internal energy sources affecting reliability. The combination creates a sound way to enumerate the energies to which a system may be exposed during its lifetime. We input these energies into planning an accelerated life test, a Multi Environment Over Stress Test. The test objective is to discover weak links and interactions among the system and the energies to which it is exposed, and design them out. As an example, the methods are applied to the pipe in subsea pipeline. However, they can be widely used in other civil engineering industries as well. The proposed method is compared with current methods.

  8. Two-Word Combinations as English and Lithuanian Terms of Building and Civil Engineering

    Directory of Open Access Journals (Sweden)

    Laimutė Kitkauskienė

    2011-04-01

    Full Text Available This paper studies English and Lithuanian two-word terms of building and civil engineering with respect to their grammatical and semantic structures. By means of a comparative analysis common and diverse structures of the terms under discussion have been considered, and some main two-word parallel term structures are distinguished in these languages. Structural differences are characterized by the grammatical peculiarities of the two languages. Semantic equivalence or non-equivalence of some components of such terms is discussed, and the adequacy of the meaning of the terms compared is explained. The comparative study of such terms should add to quick recognizing of certain structures and to facilitating comprehension and use of the terms. The adequacy of the English and Lithuanian terms means the identity of their meaning, and namely, this is what matters in special-subject communication.

  9. Web-based Peer Assessment: A Case Study with Civil Engineering Students

    Directory of Open Access Journals (Sweden)

    Gonçalo Cruz

    2013-02-01

    Full Text Available Peer-assessed online collaborative writing is of growing importance for higher education. Based on the quantitative and qualitative analysis of collected data, this work presents the results of a case study in a graduate civil engineering course at the University of Trás-os-Montes e Alto Douro, Vila Real, Portugal. After an overall presentation of the learning activity, it examines students’ attitudes towards web-based peer assessment and identifies which factors are related to students’ use and appreciation of feedback. In addition, an analysis of the type of feedback is presented in an attempt to evaluate students’  written communication skills. The results of this study provide indications on how to improve the design and implementation of future web-based peer assessment tasks and raise questions on the effectiveness of peer/teacher grading in the use of feedback.

  10. Consolidation on civil engineering and technical infrastructure at CERN from now to 2010

    CERN Document Server

    Alves, P; Pepinster, P; CERN. Geneva. ST Division

    2003-01-01

    The age of the civil engineering structure (office buildings, halls) and of tertiary technical equipment (mainly HVAC and electricity) at CERN is such that their renovation must be considered in the near future. Due to the large number of buildings and equipment in these conditions, and the restricted budget available, it is extremely important to define priorities. The aim of this note is to give the picture of the current conditions and the related problems, based on the backlog of CERN database (MP5) and confronting it with the inventory made at CERN by an external company. After having identified the most frequent problems and repairs to carry out, a planning for intervention is therefore presented optimizing the safety aspects, maintenance costs and comfort for the users. The timescale of this intervention is related to the money that will be available in the coming years.

  11. Civil-engineering work for Linac 4 and related roadworks - information for drivers

    CERN Multimedia

    TS Department

    2008-01-01

    The civil-engineering work for the construction of the Linac 4 accelerator has started on 22 October on the Mont Citron, the mound just opposite Restaurant No. 2 between the Computer Centre and the PS complex. Initially the work will involve excavating the mound and transporting the spoil to the area in front of Building SM18. This first phase of work will last for about five months until April 2009. The large number of lorries will cause disruption to traffic on the Route Rutherford, part of the Route Einstein and in the transfer tunnel between the two sites. Traffic lights for alternating traffic will be in operation at each end of the tunnel since there is insufficient room for two lorries travelling in opposite directions to use it at the same time. Consequently, users are strongly recommended not to use the tunnel except for transporting equipment between the two sites. Users not transporting equipment are strongly recommended ...

  12. Experience within the CERN Civil Engineering Group with Outsourced Design Services

    CERN Document Server

    Watson, T

    1998-01-01

    In April 1996, CERN awarded three contracts for civil engineering design services associated with the LHC project. The three contracts were awarded to three different joint ventures of firms from five member states. The total bid price for these services was in excess of 35 MCHF and the contracts will run for up to seven years. This paper aims to discuss and analyze the experience gained to date in the management of these contracts. In particular, the paper will address the issues of conditions of contract and specification for this form of contract. Current experience with each of the three consultants will be presented with the areas of difficulty highlighted. Conclusions will be made regarding future use of such contracts and in particular the way in which CERN must change in order to work efficiently with external designers.

  13. Role of civil engineers in design and construction of nuclear power plants

    International Nuclear Information System (INIS)

    Nuclear energy remains an important element in India's energy mix for sustaining rapid economic growth. In the Indian energy scenario projections for the future, nuclear power through fast reactors has been considered as an important component. Fast reactors are also planned to be built in the medium term to burn minor actinides as means of reducing the burden of radioactive waste management. Nuclear power in India provides 3% of the electricity generated in the country now; it is estimated to go up to 25% by 2050. India has a special interest in developing fast breeder reactors and use of thorium as a source of energy as it has one of the largest reserves of thorium. Nuclear industry always provides challenging works to civil engineers. From geotechnical investigation, structural analysis, design, construction and to material developments and provides unique opportunity for excellence

  14. Designing educational software for analysing pressurised hydraulic systems in civil engineering

    Directory of Open Access Journals (Sweden)

    Myriam Rocío Pallares Muñoz

    2010-04-01

    Full Text Available New information technologies have opened up a world of inexhaustible possibilities in teaching. Using such technologies in technical teaching has become indispensable due to the nature of current resources in industrial design and production. This work consists of preparing didactic material (educational software aimed at tea- ching fluid mechanics, particularly analysing tube, tank and pumping systems, initially aimed at civil engineering students from the Universidad Santo Tomás in Bogotá. Such materials have been successfully developed and used in their formal programmes by several universities around the world during the last few years. The didactic software mentioned in this work was constructed using Visual Basic programming language. This has resulted in a very useful educational tool, leading to effective teacher—student communication which is suitable for both the classroom and students’ personal work (Angel y Bautista, 2001; Aguiar, 2002.

  15. Human engineering analysis for the high speed civil transport flight deck

    Science.gov (United States)

    Regal, David M.; Alter, Keith W.

    1993-01-01

    The Boeing Company is investigating the feasibility of building a second generation supersonic transport. If current studies support its viability, this airplane, known as the High Speed Civil Transport (HSCT), could be launched early in the next century. The HSCT will cruise at Mach 2.4, be over 300 feet long, have an initial range of between 5000 and 6000 NM, and carry approximately 300 passengers. We are presently involved in developing an advanced flight deck for the HSCT. As part of this effort we are undertaking a human engineering analysis that involves a top-down, mission driven approach that will allow a systematic determination of flight deck functional and information requirements. The present paper describes this work.

  16. ADVANCED NICKEL-BASED AND NICKEL-IRON-BASED SUPERALLOYS FOR CIVIL ENGINEERING APPLICATIONS

    Institute of Scientific and Technical Information of China (English)

    U. Brill

    2005-01-01

    The use of high-temperature materials is especially important in power station construction,heating systems engineering, furnace industry, chemical and petrochemical industry, waste incineration plants, coal gasification plants and for flying gas turbines in civil and military aircrafts and helicopters. Particularly in recent years, the development of new processes and the drive to improve the economics of existing processes have increased the requirements significantly so that it is necessary to change from well-proven materials to new alloys. Hitherto, heat resistant ferritic steels sufficed in conventional power station constructions for temperatures up to 550℃ newly developed ferritic/martensitic steels provide sufficient strength up to about 600-620℃. In new processes, e.g. fiuidized-bed combustion of coal, process temperatures up to 900℃ occur. However, this is not the upper limit, since in combustion engines, e.g. gas turbines. Material temperatures up to 1100℃ are reached locally. Similar development trends can also be identified in the petrochemical industry and in the heat treatment and furnace engineering. The advance to ever higher material temperatures now not only has the consequence of having to use materials with enhanced high-strength properties, considerable attention now also has to be given to their chemical stability in corrosive media. Therefore not only examples of the use of high-temperature alloys for practical applications will be given but also be contributed to some general rules for material selection with regard to their high-temperature strength and corrosion resistance.

  17. Cement-based piezoelectric ceramic composites for sensor applications in civil engineering

    Science.gov (United States)

    Dong, Biqin

    The objectives of this thesis are to develop and apply a new smart composite for the sensing and actuation application of civil engineering. Piezoelectric ceramic powder is incorporated into cement-based composite to achieve the sensing and actuation capability. The research investigates microstructure, polarization and aging, material properties and performance of cement-based piezoelectric ceramic composites both theoretically and experimentally. A hydrogen bonding is found at the interface of piezoelectric ceramic powder and cement phase by IR (Infrared Ray), XPS (X-ray Photoelectron Spectroscopy) and SIMS (Secondary Ion Mass Spectroscopy). It largely affects the material properties of composites. A simple first order model is introduced to explain the poling mechanism of composites and the dependency of polarization is discussed using electromechanical coupling coefficient kt. The mechanisms acting on the aging effect is explored in detail. Dielectrical, piezoelectric and mechanical properties of the cement-based piezoelectric ceramic composites are studied by experiment and theoretical calculation based on modified cube model (n=1) with chemical bonding . A complex circuit model is proposed to explain the unique feature of impedance spectra and the instinct of high-loss of cement-based piezoelectric ceramic composite. The sensing ability of cement-based piezoelectric ceramic composite has been evaluated by using step wave, sine wave, and random wave. It shows that the output of the composite can reflects the nature and characteristics of mechanical input. The work in this thesis opens a new direction for the current actuation/sensing technology in civil engineering. The materials and techniques, developed in this work, have a great potential in application of health monitoring of buildings and infrastructures.

  18. Civil Engineering Applications of Ground Penetrating Radar: Research Perspectives in COST Action TU1208

    Science.gov (United States)

    Pajewski, Lara; Benedetto, Andrea; Loizos, Andreas; Slob, Evert; Tosti, Fabio

    2013-04-01

    Ground Penetrating Radar (GPR) is a safe, non-destructive and non-invasive imaging technique that can be effectively used for advanced inspection of composite structures and for diagnostics affecting the whole life-cycle of civil engineering works. GPR provides high resolution images of structures and subsurface through wide-band electromagnetic waves. It can be employed for the surveying of roads, pavements, bridges, tunnels, for detecting underground cavities and voids, for utility sensing, for the inspection of buildings, reinforced concrete and pre-cast concrete structures, for geotechnical investigation, in foundation design, as well as for several other purposes. Penetration and resolution of GPR depend primarily on the transmitting frequency of the equipment, the antenna characteristics, the electrical properties of the ground or of the surveyed material, and the contrasting electrical properties of the targets with respect to the surrounding medium. Generally there is a direct relationship between the transmitter frequency and the resolution that can be obtained; conversely there is an inverse relationship between frequency and penetration depth. GPR works best in dry ground environments, but can also give good results in wet, saturated materials; it does not work well in saline conditions, in high-conductivity media and through dense clays which limit signal penetration. Different approaches can be employed in the processing of collected GPR data. Once data have been processed, they still have to be analysed. This is a challenging problem, since interpretation of GPR radargrams is typically non-intuitive and considerable expertise is needed. In the presence of a complex scenario, an accurate electromagnetic forward solver is a fundamental tool for the validation of data interpretation. It can be employed for the characterization of scenarios, as a preliminary step that precedes a survey, or to gain a posteriori a better understanding of measured data. It

  19. A Technique of Two-Stage Clustering Applied to Environmental and Civil Engineering and Related Methods of Citation Analysis.

    Science.gov (United States)

    Miyamoto, S.; Nakayama, K.

    1983-01-01

    A method of two-stage clustering of literature based on citation frequency is applied to 5,065 articles from 57 journals in environmental and civil engineering. Results of related methods of citation analysis (hierarchical graph, clustering of journals, multidimensional scaling) applied to same set of articles are compared. Ten references are…

  20. Winning the Popularity Contest: Researcher Preference When Selecting Resources for Civil Engineering, Computer Science, Mathematics and Physics Dissertations

    Science.gov (United States)

    Dotson, Daniel S.; Franks, Tina P.

    2015-01-01

    More than 53,000 citations from 609 dissertations published at The Ohio State University between 1998-2012 representing four science disciplines--civil engineering, computer science, mathematics and physics--were examined to determine what, if any, preferences or trends exist. This case study seeks to identify whether or not researcher preferences…

  1. Civil engineering and bio-based materials; Grond-, weg- en waterbouw aan de slag met biobased materialen

    Energy Technology Data Exchange (ETDEWEB)

    Pijlman, E. [KNN, Groningen (Netherlands); Venema, A. [Centrum voor Energie en Milieukunde IVEM, Rijksuniversiteit Groningen, Groningen (Netherlands)

    2012-03-15

    A brief overview is provided of the options, the opportunities and the possible contribution of a bio-based economy to civil engineering in the Netherlands. [Dutch] Een kort overzicht wordt gegeven van de mogelijkheden, de kansen in en de mogelijke bijdrage van een biobased economy m.b.t. de Grond-, Weg- en Waterbouw (GWW) sector in Nederland.

  2. Incorporating a Systems Approach into Civil and Environmental Engineering Curricula: Effect on Course Redesign, and Student and Faculty Attitudes

    Science.gov (United States)

    Hayden, Nancy J.; Rizzo, Donna M.; Dewoolkar, Mandar M.; Neumann, Maureen D.; Lathem, Sandra; Sadek, Adel

    2011-01-01

    This paper presents a brief overview of the changes made during our department level reform (DLR) process (Grant Title: "A Systems Approach for Civil and Environmental Engineering Education: Integrating Systems Thinking, Inquiry-Based Learning and Catamount Community Service-Learning Projects") and some of the effects of these changes on…

  3. An Analysis of Female Lecturers' Participation in Civil Engineering Research and Development Activities at One Polytechnic in Zimbabwe

    Science.gov (United States)

    Chikuvadze, Pinias; Matswetu, Vimbai Sharon; Mugijima, Samuel

    2015-01-01

    This study sought to explore female lecturers' participation in civil engineering research and development activities at one polytechnic in Zimbabwe. Case study design was chosen for this study to make predictions, narration of events, comparisons and drawing of conclusions. The female lecturers were purposively sampled to participate in the…

  4. Proceedings of the Department of Civil and Structural Engineering, University of Sheffield – The Annual Postgraduate Research Student Conference 2015

    OpenAIRE

    aa, vv

    2015-01-01

    The ten papers which appear in this proceedings were contributed by current research students studying in the Department of Civil & Structural Engineering at the University of Sheffield. The papers which have been included provide a flavour of the breadth of the research currently being undertaken in the Department. The Department has a long history of undertaking research in the field of structural engineering and mechanics, and the area is represented in the proceedings by five papers. Two ...

  5. A preliminary study on the integral relationship between critical thinking and mathematical thinking among practicing civil engineers

    Science.gov (United States)

    Osman, Sharifah; Mohammad, Shahrin; Abu, Mohd Salleh

    2015-05-01

    Mathematics and engineering are inexorably and significantly linked and essentially required in analyzing and accessing thought to make good judgment when dealing in complex and varied engineering problems. A study in the current engineering education curriculum to explore how the critical thinking and mathematical thinking relates to one another, is therefore timely crucial. Unfortunately, there is not much information available explicating about the link. This paper aims to report findings of a critical review as well as to provide brief description of an on-going research aimed to investigate the dispositions of critical thinking and the relationship and integration between critical thinking and mathematical thinking during the execution of civil engineering tasks. The first part of the paper reports an in-depth review on these matters based on rather limited resources. The review showed a considerable form of congruency between these two perspectives of thinking, with some prevalent trends of engineering workplace tasks, problems and challenges. The second part describes an on-going research to be conducted by the researcher to investigate rigorously the relationship and integration between these two types of thinking within the perspective of civil engineering tasks. A reasonably close non-participant observations and semi-structured interviews will be executed for the pilot and main stages of the study. The data will be analyzed using constant comparative analysis in which the grounded theory methodology will be adopted. The findings will serve as a useful grounding for constructing a substantive theory revealing the integral relationship between critical thinking and mathematical thinking in the real civil engineering practice context. The substantive theory, from an angle of view, is expected to contribute some additional useful information to the engineering program outcomes and engineering education instructions, aligns with the expectations of

  6. MANUAL. Fly ash in civil engineering, Gravel roads; HANDBOK. Flygaska i mark- och vaegbyggnad, Grusvaegar

    Energy Technology Data Exchange (ETDEWEB)

    Munde, Hanna; Svedberg, Bo; Macsik, Josef; Maijala, Aino; Lahtinen, Pentti; Ekdahl, Peter; Neren, Jens [Vattenfall AB, Stockholm (Sweden). Vaerme Norden

    2006-01-15

    Fly ash based on biofuels or coal has been used as construction material for a long time in roads and other civil engineering applications. Some example, where it has been used in roadbase and subbase of gravel roads, are in the counties of Uppsala, Soedermanland, Vaestmanland and in Finland. The use of fly ash has contributed to good function for example as bearing capacity, thaw and frost capacity and good durability. This has also reduced costs for maintenance. The objective of this project was to develop a manual to provide a base for contemporary use of fly ash in road constructions. In the manual experience from studies, field tests and regulations has been compiled. The manual handles fly ash as base for products to be used in base and subbase in gravel roads. Future user of the guidelines are mainly consultant engineers and contractors. However the aim of the manual is to also support road administrators, environmental authorities and industry. The project has been carried out parallel to another ongoing national project titled 'Guidelines, Use of alternative materials in civil engineering'. The objective of that project is to establish a base for handling of alternative materials in Sweden. Fly ash in gravel roads are mainly used in two typical applications, one without any additive in a single layer and one with fly ash mixed with gravel. The use of flyash provides functional properties such as increased stiffness, stability and enhanced frost and thaw capacity for the road construction in total. Furthermore the products based on fly ash will have low permeability and good frost and thaw durability. These properties are for example related to fly ash quality, design and construction and are in general expected to be better than for traditional constructions using, for example, sand or gravel. The properties can be enhanced further by using binders such as cement and Merit. Fly ash should always be used above the ground water table with

  7. Pedagogies to Achieve Sustainability Learning Outcomes in Civil and Environmental Engineering Students

    Directory of Open Access Journals (Sweden)

    Angela R. Bielefeldt

    2013-10-01

    Full Text Available The civil and environmental engineering disciplines have identified the levels of knowledge about sustainability that are desirable for students to achieve as they graduate with a bachelor’s degree, as well as sustainability-related competencies to be obtained during a master’s degree, and on-the-job, prior to professional licensure. Different pedagogies are better suited to help students attain these levels of cognitive ability, while also developing affective outcomes. This paper provides examples of different methods that have been used at one institution to educate engineering students about sustainability, supported with data that indicates whether the method successfully achieved the targeted learning outcomes. Lectures, in-class active learning, readings, and appropriately targeted homework assignments can achieve basic sustainability knowledge and comprehension by requiring students to define, identify, and explain aspects of sustainability. Case studies and the application of software tools are good methods to achieve application and analysis competencies. Project-based learning (PBL and project-based service-learning (PBSL design projects can reach the synthesis level and may also develop affective outcomes related to sustainability. The results provide examples that may apply to a wider range of disciplines and suggest sustainability outcomes that are particularly difficult to teach and/or assess.

  8. Landsat 8 Multispectral and Pansharpened Imagery Processing on the Study of Civil Engineering Issues

    Science.gov (United States)

    Lazaridou, M. A.; Karagianni, A. Ch.

    2016-06-01

    Scientific and professional interests of civil engineering mainly include structures, hydraulics, geotechnical engineering, environment, and transportation issues. Topics included in the context of the above may concern urban environment issues, urban planning, hydrological modelling, study of hazards and road construction. Land cover information contributes significantly on the study of the above subjects. Land cover information can be acquired effectively by visual image interpretation of satellite imagery or after applying enhancement routines and also by imagery classification. The Landsat Data Continuity Mission (LDCM - Landsat 8) is the latest satellite in Landsat series, launched in February 2013. Landsat 8 medium spatial resolution multispectral imagery presents particular interest in extracting land cover, because of the fine spectral resolution, the radiometric quantization of 12bits, the capability of merging the high resolution panchromatic band of 15 meters with multispectral imagery of 30 meters as well as the policy of free data. In this paper, Landsat 8 multispectral and panchromatic imageries are being used, concerning surroundings of a lake in north-western Greece. Land cover information is extracted, using suitable digital image processing software. The rich spectral context of the multispectral image is combined with the high spatial resolution of the panchromatic image, applying image fusion - pansharpening, facilitating in this way visual image interpretation to delineate land cover. Further processing concerns supervised image classification. The classification of pansharpened image preceded multispectral image classification. Corresponding comparative considerations are also presented.

  9. Categorization of seismically-induced stresses for civil and mechanical engineering

    International Nuclear Information System (INIS)

    Highlights: ► A seismic load can be of any type from force-controlled to displacement-controlled. ► Seismic input and structural features play a concurrent role in seismic load categorization. ► A margin index is introduced, which controls seismic load categorization. ► A formula is given for calculating the margin index. ► A formula is given that provides the primary part of a seismically-induced stress. -- Abstract: Both civil and mechanical engineers come across loads of the force-controlled type (qualified as “primary”) or of the displacement-controlled type (qualified as “secondary”). For decades, different authors with either civil or mechanical backgrounds have been debating whether a particular seismic load should be classified as primary or secondary, but without apparent mutual understanding or mutual benefit so far. The purpose of this paper is to bring some clarity to the subject by considering a family of oscillators, which are characterized by their ductile capacity, μu, and their “effective stiffness factor”, τ. The considered range of τ values (0 < τ < 1) enables to cover all cases from the perfect damage to the perfect non-damage models. A structural index λ is also introduced, which is a mix of ductility and effective stiffness factor. It is concluded that a seismic input cannot be a priori regarded as primary or secondary. Both the λ value of the structure or component and the slope, p, of the input spectrum in the vicinity of its (dominant) natural frequency should be considered concurrently when making a decision about stress categorization. A margin index m is introduced, which controls seismic load/stress categorization. A formula is given that provides the primary part of a seismically-induced stress

  10. Curricular Reform: Systems Modeling and Sustainability in Civil and Environmental Engineering at the University of Vermont

    Science.gov (United States)

    Rizzo, D. M.; Hayden, N. J.; Dewoolkar, M.; Neumann, M.; Lathem, S.

    2009-12-01

    Researchers at the University of Vermont were awarded a NSF-sponsored Department Level Reform (DLR) grant to incorporate a systems approach to engineering problem solving within the civil and environmental engineering programs. A systems approach challenges students to consider the environmental, social, and economic aspects within engineering solutions. Likewise, sustainability requires a holistic approach to problem solving that includes economic, social and environmental factors. Our reform has taken a multi-pronged approach in two main areas that include implementing: a) a sequence of three systems courses related to environmental and transportation systems that introduce systems thinking, sustainability, and systems analysis and modeling; and b) service-learning (SL) projects as a means of practicing the systems approach. Our SL projects are good examples of inquiry-based learning that allow students to emphasize research and learning in areas of most interest to them. The SL projects address real-world open-ended problems. Activities that enhance IT and soft skills for students are incorporated throughout the curricula. Likewise, sustainability has been a central piece of the reform. We present examples of sustainability in the SL and modeling projects within the systems courses (e.g., students have used STELLA™ systems modeling software to address the impact of different carbon sequestration strategies on global climate change). Sustainability in SL projects include mentoring home schooled children in biomimicry projects, developing ECHO exhibits and the design of green roofs, bioretention ponds and porous pavement solutions. Assessment includes formative and summative methods involving student surveys and focus groups, faculty interviews and observations, and evaluation of student work.

  11. Summary of the Large Civil Tiltrotor (LCTR2) Engine Gearbox Study

    Science.gov (United States)

    Snyder, Christopher A.; Robuck, Mark; Wilkerson, Joseph; Nordstrom, Carl

    2010-01-01

    In support of the Fundamental Aeronautics Program, Subsonic Rotary Wing Project, NASA is continuing to study the Large Civil Tiltrotor (LCTR) concept to help define/refine vehicle, system and subsystem attributes. These attributes can then be used to define performance requirements and identify new or advanced technologies to achieve an operational vehicle class. As part of this goal, NASA contracted with The Boeing Company and its subcontractor Rolls-Royce to perform an investigation of different combinations of engine and gearbox variability to achieve a maximum of 50 percent rotor tip speed reduction from hover to cruise conditions. Previous NASA studies identified the 50 percent rotor speed reduction minimized vehicle gross weight and fuel burn. The LCTR2 (LCTR-iteration 2) was the contracted study baseline for initial sizing. Rotor tip speed ratios (cruise to hover) of 100, 77, and 54 percent were analyzed for each combination of engine and gearbox speed reduction to achieve the chosen rotor tip speed ratio. Three different engine and gearbox technology levels were assumed; commercial off-the-shelf (COTS), entry-in-service (EIS) in 2025 and EIS in 2035. These technology levels were applied to determine each particular effect on vehicle gross weight and fuel burn, while other vehicle technologies were assumed constant. This report summarizes the work performed that is being put together into a comprehensive NASA contractor report. Some background on the LCTR concept and baseline vehicle will be given and then a discussion concerning the technical approach utilized. Major study assumptions and results will be presented and discussed. Finally conclusions will be drawn as well as suggestions provided for future efforts.

  12. Validation of the GPU-Accelerated CFD Solver ELBE for Free Surface Flow Problems in Civil and Environmental Engineering

    Directory of Open Access Journals (Sweden)

    Christian F. Janßen

    2015-07-01

    Full Text Available This contribution is dedicated to demonstrating the high potential and manifold applications of state-of-the-art computational fluid dynamics (CFD tools for free-surface flows in civil and environmental engineering. All simulations were performed with the academic research code ELBE (efficient lattice boltzmann environment, http://www.tuhh.de/elbe. The ELBE code follows the supercomputing-on-the-desktop paradigm and is especially designed for local supercomputing, without tedious accesses to supercomputers. ELBE uses graphics processing units (GPU to accelerate the computations and can be used in a single GPU-equipped workstation of, e.g., a design engineer. The code has been successfully validated in very different fields, mostly related to naval architecture and mechanical engineering. In this contribution, we give an overview of past and present applications with practical relevance for civil engineers. The presented applications are grouped into three major categories: (i tsunami simulations, considering wave propagation, wave runup, inundation and debris flows; (ii dam break simulations; and (iii numerical wave tanks for the calculation of hydrodynamic loads on fixed and moving bodies. This broad range of applications in combination with accurate numerical results and very competitive times to solution demonstrates that modern CFD tools in general, and the ELBE code in particular, can be a helpful design tool for civil and environmental engineers.

  13. Current status of International Linear Collider Project in Technical Design stage and activities of Japan Society of Civil Engineers

    International Nuclear Information System (INIS)

    In order to invite the International Linear Collider (ILC) in Japan, Japan Society of Civil Engineers (JSCE) established the Linear Collider Subcommittee of JSCE (LC subcommittee) in April, 2006. Abstracts of the activities and objects of LC subcommittee are stated. The LC subcommittee consists of five working groups. Each working group investigated the previous reports of 2006 and 2007 and reported some important notices. The working group on planning and project and management reported the site conditions of Japan, tunnels and facilities. The working group on geological survey, test and environmental design stated the earthquake, fault, ground water, water quality, long-term displacement and survey methods. The working group on structural and environmental design described the tunnel design in fault and fracture zone, hollow, beam tunnel and service tunnel. The working group on construction and maintenance reported some examples of troubles in granite zone, survey for steering, shaft and inclined shaft. The working group on information investigation of ILC described analysis of reference materials, construction of LHC, beam tunnel and some points under consideration. (S.Y.)

  14. Learning about Environmental Issues in Engineering Programmes: A Case Study of First-Year Civil Engineering Students' Contextualisation of an Ecology Course

    Science.gov (United States)

    Lundholm, Cecilia

    2004-01-01

    Describes how first-year civil engineering students interpreted the content and structure of an ecology course. Students' learning processes were analysed from an intentional perspective, i.e. a perspective that takes into account the students' educational aims and conceptions of the study situation. Interviews were carried out with six civil…

  15. Multi-Sensing system for outdoor thermal monitoring: Application to large scale civil engineering components

    Science.gov (United States)

    Crinière, Antoine; Dumoulin, Jean; Manceau, Jean-Luc; Perez, Laetitia; Bourquin, Frederic

    2014-05-01

    Aging of transport infrastructures combined with traffic and climatic solicitations contribute to the reduction of their performances. To address and quantify the resilience of civil engineering structure, investigations on robust, fast and efficient methods are required. Among research works carried out at IFSTTAR, methods for long term monitoring face an increasing demand. Such works take benefits of this last decade technological progresses in ICT domain. The present study follows the ISTIMES European project [1], which aimed at demonstrate the ability of different electromagnetic sensing techniques, processing methods and ICT architecture, to be used for long term monitoring of critical transport infrastructures. Thanks to this project a multi-sensing techniques system, able to date and synchronize measurements carried out by infrared thermography coupled with various measurements data (i.e. weather parameters), have been designed, developed and implemented on real site [2]. Among experiments carried out on real transport infrastructure, it has been shown, for the "Musmesci" bridge deck (Italy), that by using infrared thermal image sequence with weather measurements during sevral days it was possible to develop analysis methods able to produce qualitative and quantitative data [3]. In the present study, added functionalities were designed and added to the "IrLAW" system in order to reach full autonomy in term of power supply, very long term measurement capability (at least 1 year) and automated data base feeding. The surveyed civil engineering structures consist in two concrete beams of 16 m long and 21 T weight each. One of the two beams was damage by high energy mechanical impact at the IFSTTAR falling rocks test station facilities located in the French Alpes [4]. The system is composed of one IR uncooled microbolometric camera (FLIR SC325) with a 320X240 Focal Plane Array detector in band III, a weather station VAISALA WXT520, a GPS, a failover power supply

  16. Rhetorical Impact through Hedging Devices in the ‘Results and Discussion’ Part of a Civil Engineering Research Article

    Directory of Open Access Journals (Sweden)

    Minoo Khamesian

    2015-12-01

    Full Text Available It is common knowledge that hedging devices as a rhetorical technique common in all persuasive writing are considerably important in scientific discourse, for they are tools which facilitate presenting claims or arguments in a polite, acceptable and respectful manner. In addition, they are discoursal resources available to a scientific writer’s propositions to express uncertainty, skepticism, and open-mindedness.Research articles are an important means of communication between different members of a discourse community, and will be convincing to a certain extent only when authors are able to employ rhetorical conventions, such as hedging devices, persuasively. However, hedging is a problematic aspect in EAP learning since rarely are the learners able to hedge their statements appropriately, engineering students not being an exception.Therefore, this article tends to linguistically analyze the function of rhetorical impact of using hedging devices in the results and discussion part of a civil engineering research article published in the Asian Journal of Civil Engineering (Building & Housing to conclude that a greater and more systematic attention should be given to hedging devices considering their importance in EAP. The implication is that students, especially the Non Native English Speakers, be taught how to recognize and effectively use hedging devices in their writing as they do not seem to be familiar with hedges and therefore find it particularly difficult to hedge their statements appropriately.Keywords: hedging devices, discourse community, linguostylistic analysis, Civil Engineering Research Articles

  17. Civil-engineering work for Linac 4 and related roadworks - information for drivers

    CERN Multimedia

    TS Department

    2008-01-01

    The civil-engineering work for the construction of the Linac 4 accelerator will start on 22 October on the Mont Citron, the mound just opposite Restaurant No. 2 between the Computer Centre and the PS complex. Initially the work will involve excavating the mound and transporting the spoil to the area in front of Building SM18. This first phase of work will last for about five months until April 2009. The large number of lorries will cause disruption to traffic on the Route Rutherford, part of the Route Einstein and in the transfer tunnel between the two sites. Traffic lights for alternating traffic will be in operation at each end of the tunnel since there is insufficient room for two lorries travelling in opposite directions to use it at the same time. Consequently, users are strongly recommended not to use the tunnel except for transporting equipment between the two sites. Users not transporting equipment are strongly recommended to use Gates A and B. In parallel, a temporary roundabout will be installed ...

  18. Virtual Placements to Develop Employability Skills for Civil and Environmental Engineering Students

    Directory of Open Access Journals (Sweden)

    Parneet Paul

    2015-04-01

    Full Text Available This project work addresses the crucial need to encourage undergraduate civil and environmental engineering students to gain employment skills and training right from the start of their studies so that their overall employability increases; their confidence level in networking with industry and within the workplace increases; and so that they are successfully able to obtain employment after finishing their studies. This initiative is a stepping-stone employability exercise which focuses specifically on first year students to help them engage with industry right from the start of their course. It is proposed that they would gain some realistic work experience both individually and as part of group within a virtual work environment using an action learning approach. The virtual environment used was based on SecondLife, a popular virtual reality programme. A pilot scheme was set up and run at Brunel University during the summer of 2014 using eight self-selecting first year students. The scheme’s outputs were extensively monitored and evaluated to assess its impact on the development of employability skills. This approach may prove a cost effective way of letting students gain an insight into the workplace whilst improving these skills. It may also prove a way for employers to select from a large range of students the best to actually undertake their real work-based internships.

  19. Engine Installation Effects of Four Civil Transport Airplanes: Wallops Flight Facility Study

    Science.gov (United States)

    Fleming, Gregg G.; Senzig, David A.; McCurdy, David A.; Roof, Christopher J.; Rapoza, Amanda S.

    2003-01-01

    The National Aeronautics and Space Administration (NASA), Langley Research Center (LaRC), the Environmental Measurement and Modeling Division of the United States Department of Transportation s John A. Volpe National Transportation Systems Center (Volpe), and several other organizations (see Appendix A for a complete list of participating organizations and individuals) conducted a noise measurement study at NASA s Wallops Flight Facility (Wallops) near Chincoteague, Virginia during September 2000. This test was intended to determine engine installation effects on four civil transport airplanes: a Boeing 767-400, a McDonnell-Douglas DC9, a Dassault Falcon 2000, and a Beechcraft King Air. Wallops was chosen for this study because of the relatively low ambient noise of the site and the degree of control over airplane operating procedures enabled by operating over a runway closed to other uses during the test period. Measurements were conducted using a twenty microphone U-shaped array oriented perpendicular to the flight path; microphones were mounted such that ground effects were minimized and low elevation angles were observed.

  20. Petrophysical properties and durability of the Touro amphibolite s (A Coruna, Spain) used in civil engineering

    International Nuclear Information System (INIS)

    Nowadays, Touro amphibolites (La Coruna, Spain) are exploited as crushed-rock aggregates in civil engineering. These materials are mainly used as ballast for road construction. Therefore, it is interesting to study these materials in function of several parameters obtained directly in quarry faces. For this purpose, the same techniques and tests previously applied in other fields such as natural stone have been used. The aim of this work is to study the quality and durability of Touro amphibolites when subjected to extreme temperature, water and salt (NaCl) actions. The NaCl is included in this study because it is commonly used as fluxing material in pavements and roads. The quality of these amphibolites, a classification based on the concrete and road tests and the techniques applied, is good. The best properties of these materials are their low porosity and high ability to compact. They also have a high durability under the action of extreme temperatures, salts and water. These results also indicate that these amphibolites can better support high temperature rather than low temperature degradation. (Author)

  1. A newly developed Fe-based shape memory alloy suitable for smart civil engineering

    International Nuclear Information System (INIS)

    A nominally new Fe-16Mn-5Si-10Cr-4Ni-1(V, N) (mass %) alloy containing V and N has been developed aiming to precipitate VN particles without training. Transmission electron microscope (TEM) observations have indicated that VN preferentially precipitated on the top of stacking faults and act as nucleation sites for the γ (FCC) →ε phase (hcp) transformation. VN plays a key role in improving the thermo-mechanical properties. The results showed that shape memory properties could be remarkably improved by pre-deformation at room temperature before aging or deformation at low temperature after aging treatment. 44% shape recovery and 440 MP shape recovery stress were achieved when heating to 160 °C after the initial 4% strain at RT. Nearly perfect shape recovery (90%) and shape recovery stress (500 Mpa) have been achieved when the alloy was 4% deformed at −45 °C followed by heating up to 225 °C. Moreover, no relaxation phenomena were found when the tested samples were cooled to room temperature. All of these results suggested the possible practical applications of Fe–Mn–Si SMAs, especially in smart civil engineering. (paper)

  2. Pollution prevention opportunity assessments of US Army Corps of Engineers Civil Works Facilities

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    This project summary describes three Pollution Prevention Opportunity Assessments conducted at US Army Corps of Engineers Civil Works facilities under the Waste Reduction Evaluations at Federal Sites (WREAFS) Program. The purposes of the WREAFS Program are to identify new technologies and techniques for reducing wastes from industrial processes at Federal sites, and to enhance the implementation of pollution prevention through technology transfer. New techniques and technologies for reducing waste generation are identified through pollution prevention opportunity assessments (PPOA) and may be further evaluated through joint research, development, and demonstration projects. The assessments were conducted using the procedures outlined in EPA`s Facility Pollution Prevention Guide. The assessments had two major phases. The first phase quantified waste generation and management practices. The second phase identified and evaluated the feasibility of opportunities and techniques to eliminate, reduce, or recycle wastes. The facilities studied in the PPOAs were: a navigation lock and dam; a warehouse and a maintenance and repair facility; a hydroelectric power plant; and a flood control dam and reservoir with associated public recreation areas. Other Federal agencies, such as the Bureau of Reclamation and the Tennessee Valley Authority have similar functions and facilities, as do states and the private sector. Thus, the results of the PPOAs described in the three full reports have applicability to a broad audience.

  3. Optimising a modified free-space permittivity characterisation method for civil engineering applications

    Science.gov (United States)

    Muller, Wayne; Scheuermann, Alexander

    2016-04-01

    Measuring the electrical permittivity of civil engineering materials is important for a range of ground penetrating radar (GPR) and pavement moisture measurement applications. Compacted unbound granular (UBG) pavement materials present a number of preparation and measurement challenges using conventional characterisation techniques. As an alternative to these methods, a modified free-space (MFS) characterisation approach has previously been investigated. This paper describes recent work to optimise and validate the MFS technique. The research included finite difference time domain (FDTD) modelling to better understand the nature of wave propagation within material samples and the test apparatus. This research led to improvements in the test approach and optimisation of sample sizes. The influence of antenna spacing and sample thickness on the permittivity results was investigated by a series of experiments separating antennas and measuring samples of nylon and water. Permittivity measurements of samples of nylon and water approximately 100 mm and 170 mm thick were also compared, showing consistent results. These measurements also agreed well with surface probe measurements of the nylon sample and literature values for water. The results indicate permittivity estimates of acceptable accuracy can be obtained using the proposed approach, apparatus and sample sizes.

  4. Effects of sea water environment on glass fiber reinforced plastic materials used for marine civil engineering constructions

    International Nuclear Information System (INIS)

    Highlights: • Seawater environment over composite material that are suitable for civil applications. • Seawater intake is linked to tensile and flexural strength degradation in GFC. • Fatigue performance of glass composites is similar in seawater environment than in air. - Abstract: Glass fiber composites (GFRP) are common in civil engineering projects, but not in marine structures. One reason is that seawater effects degrade GFRP composites mechanical properties and interlaminar shear strength (ILSS). Here, influence of seawater environment is studied to determine the best composite materials for marine civil engineer applications, studying the influence of several factors in their mechanical properties. This is to determine safety factors to use in the design of structural calculations for marine applications. Glass/epoxy composites are the safest materials to use in marine civil structures as mechanical properties degradation becomes stabilized after moisture saturation level. UV and water cyclic analysis must be done to determine affection to transversal strength. Only vinylester GFRP has problems with biodegradation. GFRP fatigue performance is not influenced by seawater environment

  5. COST Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar": ongoing research activities and third-year results

    Science.gov (United States)

    Pajewski, Lara; Benedetto, Andrea; Loizos, Andreas; Tosti, Fabio

    2016-04-01

    This work aims at disseminating the ongoing research activities and third-year results of the COST (European COoperation in Science and Technology) Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar." About 350 experts are participating to the Action, from 28 COST Countries (Austria, Belgium, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Ireland, Italy, Latvia, Malta, Macedonia, The Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, United Kingdom), and from Albania, Armenia, Australia, Colombia, Egypt, Hong Kong, Jordan, Israel, Philippines, Russia, Rwanda, Ukraine, and United States of America. In September 2014, TU1208 has been recognised among the running Actions as "COST Success Story" ("The Cities of Tomorrow: The Challenges of Horizon 2020," September 17-19, 2014, Torino, IT - A COST strategic workshop on the development and needs of the European cities). The principal goal of the COST Action TU1208 is to exchange and increase scientific-technical knowledge and experience of GPR techniques in civil engineering, whilst simultaneously promoting throughout Europe the effective use of this safe and non-destructive technique in the monitoring of infrastructures and structures. Moreover, the Action is oriented to the following specific objectives and expected deliverables: (i) coordinating European scientists to highlight problems, merits and limits of current GPR systems; (ii) developing innovative protocols and guidelines, which will be published in a handbook and constitute a basis for European standards, for an effective GPR application in civil- engineering tasks; safety, economic and financial criteria will be integrated within the protocols; (iii) integrating competences for the improvement and merging of electromagnetic scattering techniques and of data- processing techniques; this will lead to a novel freeware tool for the localization of

  6. Time Delay Estimation algorithms adapted to dispersive media - Application to the NDT&E of civil engineering materials

    OpenAIRE

    CHAHINE, Khaled

    2010-01-01

    Time delays are generally estimated for NDT&E purposes, under the assumption of dispersion free media. As opposed to the latter, this work intends to adapt the subspace and MPM family algorithms to the dispersive nature of civil engineering materials (hydraulic concrete, soils) for which the dispersion obeys to the Q-constant model (Jonscher). Two solutions are proposed to jointly estimate the time delay, T, and the Q factor attached to each layer. The performance of algorithms is assessed ag...

  7. Validation of the GPU-Accelerated CFD Solver ELBE for Free Surface Flow Problems in Civil and Environmental Engineering

    OpenAIRE

    Christian F. Janßen; Dennis Mierke; Micha Überrück; Silke Gralher; Thomas Rung

    2015-01-01

    This contribution is dedicated to demonstrating the high potential and manifold applications of state-of-the-art computational fluid dynamics (CFD) tools for free-surface flows in civil and environmental engineering. All simulations were performed with the academic research code ELBE (efficient lattice boltzmann environment, http://www.tuhh.de/elbe). The ELBE code follows the supercomputing-on-the-desktop paradigm and is especially designed for local supercomputing, without tedious accesses t...

  8. Site consolidation on civil engineering and technical infrastructure at CERN : update to the technical note ST-2003-008

    CERN Document Server

    Nonis, M; Pepinster, P; CERN. Geneva. TS Department

    2004-01-01

    The present document updates the Technical Note ST-2003-008 where the general overview for the consolidation need until 2010 on tertiary infrastructure and civil engineering has been presented. A few interventions have been carried out in the last year, some priorities have been modified and some installations have been investigated with a closer detail; the consolidation needs and request have therefore slightly changed.

  9. Civil Engineering Applications of Ground Penetrating Radar Recent Advances @ the ELEDIA Research Center

    Science.gov (United States)

    Salucci, Marco; Tenuti, Lorenza; Nardin, Cristina; Oliveri, Giacomo; Viani, Federico; Rocca, Paolo; Massa, Andrea

    2014-05-01

    The application of non-destructive testing and evaluation (NDT/NDE) methodologies in civil engineering has raised a growing interest during the last years because of its potential impact in several different scenarios. As a consequence, Ground Penetrating Radar (GPR) technologies have been widely adopted as an instrument for the inspection of the structural stability of buildings and for the detection of cracks and voids. In this framework, the development and validation of GPR algorithms and methodologies represents one of the most active research areas within the ELEDIA Research Center of the University of Trento. More in detail, great efforts have been devoted towards the development of inversion techniques based on the integration of deterministic and stochastic search algorithms with multi-focusing strategies. These approaches proved to be effective in mitigating the effects of both nonlinearity and ill-posedness of microwave imaging problems, which represent the well-known issues arising in GPR inverse scattering formulations. More in detail, a regularized multi-resolution approach based on the Inexact Newton Method (INM) has been recently applied to subsurface prospecting, showing a remarkable advantage over a single-resolution implementation [1]. Moreover, the use of multi-frequency or frequency-hopping strategies to exploit the information coming from GPR data collected in time domain and transformed into its frequency components has been proposed as well. In this framework, the effectiveness of the multi-resolution multi-frequency techniques has been proven on synthetic data generated with numerical models such as GprMax [2]. The application of inversion algorithms based on Bayesian Compressive Sampling (BCS) [3][4] to GPR is currently under investigation, as well, in order to exploit their capability to provide satisfactory reconstructions in presence of single and multiple sparse scatterers [3][4]. Furthermore, multi-scaling approaches exploiting level

  10. Some advances towards a better understanding of wave propagation in civil engineering multiwires trands

    Science.gov (United States)

    Laguerre, L.; Treyssede, F.

    Steel members of civil engineering structures undergo degradations mainly due to corrosion and mechanical fatigue. In this context, non-destructive inspection techniques using mechanical guided waves have potential to monitor these structures. Even if wave propagation is not yet fully understood in these structures, useful results can be derived for inspection methodology by using wave modeling in cylindrical waveguide, embedded or not. However, further improvement can be expected from the development of wave propagation simulation tools for real-life structures. Indeed, several difficulties arise in the understanding of guided ultrasonic waves in such structures, partly due to the helical geometry and the inter-wire coupling effects. Moreover, these structures are pre-stressed and can be free or embedded in solid material. This paper shows some recent research results at LCPC. A first part deals with experimental results on the guided wave propagation in a commonly used steel member, the seven wire strand (i.e one straight single cylindrical wire surrounded by six helical wires). The second part aims at numerically investigating the propagation of elastic waves in free helical waveguides. A numerical method is chosen based on a semi-analytical finite element technique that relies on a specific non-orthogonal curvilinear coordinate system. This system is shown to be translationally invariant along the helix centerline so that a spatial Fourier transform can be explicitly performed along the axis to reduce the problem to two dimensions. The method can thus readily be used for the analysis of helical structures by considering the special case of no curvature. Results for single straight and helical wires are first computed. A dispersion analysis for a seven wire strand with simplified contact conditions is then performed.

  11. Some advances towards a better understanding of wave propagation in civil engineering multi-wire strands

    Science.gov (United States)

    Laguerre, L.; Treyssede, F.

    Steel members of civil engineering structures undergo degradations mainly due to corrosion and mechanical fatigue. In this context, non-destructive inspection techniques using mechanical guided waves have potential to monitor these structures. Even if wave propagation is not yet fully understood in these structures, useful results can be derived for inspection methodology by using wave modeling in cylindrical waveguide, embedded or not. However, further improvement can be expected from the development of wave propagation simulation tools for real-life structures. Indeed, several difficulties arise in the understanding of guided ultrasonic waves in such structures, partly due to the helical geometry and the inter-wire coupling effects. Moreover, these structures are pre-stressed and can be free or embedded in solid material. This paper shows some recent research results at LCPC. A first part deals with experimental results on the guided wave propagation in a commonly used steel member, the seven wire strand (i.e one straight single cylindrical wire surrounded by six helical wires). The second part aims at numerically investigating the propagation of elastic waves in free helical waveguides. A numerical method is chosen based on a semi-analytical finite element technique that relies on a specific non-orthogonal curvilinear coordinate system. This system is shown to be translationally invariant along the helix centerline so that a spatial Fourier transform can be explicitly performed along the axis to reduce the problem to two dimensions. The method can thus readily be used for the analysis of helical structures by considering the special case of no curvature. Results for single straight and helical wires are first computed. A dispersion analysis for a seven wire strand with simplified contact conditions is then performed.

  12. Civil Identity

    DEFF Research Database (Denmark)

    Petersen, Lars Axel

    In this paper I will go through a catalogue of examples of contexts in which the term civil identity is currently used, ranging from the formal and technical process of linking a set of administrative and other events to an individual biological person by means of identity cards, fingerprints, iris...... of Israel to Luce Irigaray's Feminist agenda of elaborating gender specific civil identities. My intention is to investigate whether these different employments of 'civil identity' point towards a common, and fairly well defined object field asking questions of contemporary relevance to the...

  13. Logistics engineering education from the point of view environment

    Science.gov (United States)

    Bányai, Ágota

    2010-05-01

    -of-the-art, reliable, automated mechatronics-material flow system with its single control engineering system provides the academic staff with up-to-date research facilities, and enables the students to study sophisticated equipment and systems that could also operate under industrial conditions, thus offering knowledge that can be efficiently utilised in the industry after graduation. The laboratory measurements of the programme in logistics engineering are performed in this laboratory, and they are supplemented by the theoretical and practical measurements in the ‘Robotic Technology Assembly Laboratory', the ‘Power Electronics Laboratory', the ‘Mechatronics Laboratory', the ‘CAD/CAM Laboratory' and the ‘Acoustics and Product Laboratory'. The bodies of knowledge connected with environment protection and sustainable development can be grouped around three large topic areas. In environmental economics the objective is to present the corporate-organisational aspects of environmental management. Putting environmental management in the focal point, the objective of the programme is to impart knowledge that can be utilised in practice which can be used to shift the relation between the organisation and its environment in the direction of sustainability. The tools include environmental controlling, environmental marketing and various solutions of environmental performance evaluation. The second large topic area is globalization and its logistic aspects. In the field of global logistics the following knowledge carries special weight: logistic challenges in a globalised world; the concept of global logistics, its conditions and effects; delayed manufacture, assembly, packaging; the economic investigation of delayed assembly; globalised purchase and distribution in logistics; the logistic features of the globalised production supply/distribution chain; meta-logistics systems; logistics-related EU harmonisation issues; the effect of e-commerce on the global logistic system; logistic

  14. Current State of Numerical Simulations and Testing for the Blast and Impact Protection of the Build Civil Engineering Infrastructure

    Institute of Scientific and Technical Information of China (English)

    GEBBEKEN Norbert

    2006-01-01

    The identification of the critical infrastructure has shown that the build civil engineering infrastructure is almost involved everywhere,even with the IT-infrastructure.Therefore,the passive safety of structures is demanded.Security associations have analysed that most assaults came along with explosion and impact scenarios,which amount in 80% of assaults.Consequently,these are the extraordinary loads the structures have to be planned and designed for.To carry out such an engineering job,the engineer has to be educated in multiple disciplines as physics,material science,continuum mechanics,numerical mechanics,testing,structural engineering and related specific fields as wave propagation etc.In this paper we will concentrate on the subjects of numerical simulation and testing.

  15. STRATEGY FOR IMPROVEMENT OF SAFETY AND EFFICIENCY OF COMPUTER-AIDED DESIGN ANALYSIS OF CIVIL ENGINEERING STRUCTURES ON THE BASIS OF THE SYSTEM APPROACH

    OpenAIRE

    Zaikin Vladimir Genrikhovich; Valuyskikh Viktor Petrovich

    2012-01-01

    The authors highlight three problems of the age of information technologies and proposes the strategy for their resolution in relation to the computer-aided design of civil engineering structures. The authors express their concerns in respect of globalization of software programmes designated for the analysis of civil engineering structures and employed outside of Russia. The problem of the poor quality of the input data has reached Russia. Lately, the rate of accidents of buildings and s...

  16. A review of optimization techniques used in the design of fibre composite structures for civil engineering applications

    International Nuclear Information System (INIS)

    Highlights: → We reviewed existing optimization techniques of fibre composite structures. → Proposed an improved methodology for design optimization. → Comparison showed the MRDO is most suitable. -- Abstract: Fibre composite structures have become the most attractive candidate for civil engineering applications. Fibre reinforced plastic polymer (FRP) composite materials have been used in the rehabilitation and replacement of the old degrading traditional structures or build new structures. However, the lack of design standards for civil infrastructure limits their structural applications. The majority of the existing applications have been designed based on the research and guidelines provided by the fibre composite manufacturers or based on the designer's experience. It has been a tendency that the final structure is generally over-designed. This paper provides a review on the available studies related to the design optimization of fibre composite structures used in civil engineering such as; plate, beam, box beam, sandwich panel, bridge girder, and bridge deck. Various optimization methods are presented and compared. In addition, the importance of using the appropriate optimization technique is discussed. An improved methodology, which considering experimental testing, numerical modelling, and design constrains, is proposed in the paper for design optimization of composite structures.

  17. The Effect of Rotor Cruise Tip Speed, Engine Technology and Engine/Drive System RPM on the NASA Large Civil Tiltrotor (LCTR2) Size and Performance

    Science.gov (United States)

    Robuck, Mark; Wilkerson, Joseph; Maciolek, Robert; Vonderwell, Dan

    2012-01-01

    A multi-year study was conducted under NASA NNA06BC41C Task Order 10 and NASA NNA09DA56C task orders 2, 4, and 5 to identify the most promising propulsion system concepts that enable rotor cruise tip speeds down to 54% of the hover tip speed for a civil tiltrotor aircraft. Combinations of engine RPM reduction and 2-speed drive systems were evaluated. Three levels of engine and the drive system advanced technology were assessed; 2015, 2025 and 2035. Propulsion and drive system configurations that resulted in minimum vehicle gross weight were identified. Design variables included engine speed reduction, drive system speed reduction, technology, and rotor cruise propulsion efficiency. The NASA Large Civil Tiltrotor, LCTR, aircraft served as the base vehicle concept for this study and was resized for over thirty combinations of operating cruise RPM and technology level, quantifying LCTR2 Gross Weight, size, and mission fuel. Additional studies show design sensitivity to other mission ranges and design airspeeds, with corresponding relative estimated operational cost. The lightest vehicle gross weight solution consistently came from rotor cruise tip speeds between 422 fps and 500 fps. Nearly equivalent results were achieved with operating at reduced engine RPM with a single-speed drive system or with a two-speed drive system and 100% engine RPM. Projected performance for a 2025 engine technology provided improved fuel flow over a wide range of operating speeds relative to the 2015 technology, but increased engine weight nullified the improved fuel flow resulting in increased aircraft gross weights. The 2035 engine technology provided further fuel flow reduction and 25% lower engine weight, and the 2035 drive system technology provided a 12% reduction in drive system weight. In combination, the 2035 technologies reduced aircraft takeoff gross weight by 14% relative to the 2015 technologies.

  18. 关于电气节能在民用建筑工程中的运用%Application of electrical energy saving in civil building engineering

    Institute of Scientific and Technical Information of China (English)

    樊管民

    2014-01-01

    在分析当前中国电气节能技术状况的基础上,对照明节能、供配电系统节能等进行了论述,提出了减少变压器与线路损耗措施,最后对民用建筑工程中电气节能技术的发展空间进行了展望。%On the basis of analyzes current domestic electrical energy saving technology status,the paper discusses the lighting energy saving and power supply and distribution system energy saving and so on,puts forward measures of reducing transformer and line consumption measures,and finally points out the prospect of the development space of electrical energy saving technology in civil building engineering.

  19. Effect of UV and water spraying on the mechanical properties of flax fabric reinforced polymer composites used for civil engineering applications

    International Nuclear Information System (INIS)

    Highlights: • UV weathering degraded mechanical properties of flax/epoxy composites. • SEM confirmed degradation in fibre/matrix interfacial bonding. • UV weathering caused discolouration, matrix erosion, microcracking. - Abstract: The lack of data related to durability is one major challenge that needed to be addressed prior to the widespread acceptance of natural fibre reinforced polymer composites for engineering applications. In this work, the combined effect of ultraviolet (UV) radiation and water spraying on the mechanical properties of flax fabric reinforced epoxy composite was investigated to assess the durability performance of this composite used for civil engineering applications. Specimens fabricated by hand lay-up process were exposed in an accelerated weathering chamber for 1500 h. Tensile and three-point bending tests were performed to evaluate the mechanical properties. Scanning electron microscope (SEM) was used to analyse the microstructures of the composites. In addition, the durability performance of flax/epoxy composite was compared with synthetic (glass and carbon) and hybrid fibre reinforced composites. The test results show that the tensile strength/modulus of the weathered composites decreased 29.9% and 34.9%, respectively. The flexural strength/modulus reduced 10.0% and 10.2%, respectively. SEM study confirmed the degradation in fibre/matrix interfacial bonding after exposure. Comparisons with other composites implies that flax fabric/epoxy composite has potential to be used for civil engineering applications when taking its structural and durability performance into account. Proper treatments to enhance its durability performance will make it more comparable to synthetic fibre reinforced composites when considering as construction building materials

  20. Operations research in areas of civil engineering and sustainable development: EURO working group activities

    OpenAIRE

    Zavadskas, Edmundas Kazimieras; Vilutienė EWG-ORSDCE coordinato, Tatjana

    2013-01-01

    The viewpoint presented in this paper promotes the collaboration, partnering and exchange of best practice knowledge as key factors to reap benefits for construction excellence and sustainability. The approach uses the example of EURO Working Group “OR in Sustainable Development and Civil Engineering” activities. EURO is the 'Association of European Operational Research Societies' within IFORS, the 'International Federation of Operational Research Societies'.

  1. How Much Is Enough? Examining Computer Science and Civil Engineering Citation Data to Inform Collection Development and Retention Decisions in Three Large Canadian University Libraries

    Science.gov (United States)

    Spence, Michelle; Mawhinney, Tara; Barsky, Eugene

    2012-01-01

    Science and engineering libraries have an important role to play in preserving the intellectual content in research areas of the departments they serve. This study employs bibliographic data from the Web of Science database to examine how much research material is required to cover 90% of faculty citations in civil engineering and computer…

  2. COST Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar:" ongoing research activities and mid-term results

    Science.gov (United States)

    Pajewski, Lara; Benedetto, Andrea; Loizos, Andreas; Slob, Evert; Tosti, Fabio

    2015-04-01

    This work aims at presenting the ongoing activities and mid-term results of the COST (European COoperation in Science and Technology) Action TU1208 'Civil Engineering Applications of Ground Penetrating Radar.' Almost three hundreds experts are participating to the Action, from 28 COST Countries (Austria, Belgium, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Ireland, Italy, Latvia, Malta, Macedonia, The Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, United Kingdom), and from Albania, Armenia, Australia, Egypt, Hong Kong, Jordan, Israel, Philippines, Russia, Rwanda, Ukraine, and United States of America. In September 2014, TU1208 has been praised among the running Actions as 'COST Success Story' ('The Cities of Tomorrow: The Challenges of Horizon 2020,' September 17-19, 2014, Torino, IT - A COST strategic workshop on the development and needs of the European cities). The principal goal of the COST Action TU1208 is to exchange and increase scientific-technical knowledge and experience of GPR techniques in civil engineering, whilst simultaneously promoting throughout Europe the effective use of this safe and non-destructive technique in the monitoring of infrastructures and structures. Moreover, the Action is oriented to the following specific objectives and expected deliverables: (i) coordinating European scientists to highlight problems, merits and limits of current GPR systems; (ii) developing innovative protocols and guidelines, which will be published in a handbook and constitute a basis for European standards, for an effective GPR application in civil- engineering tasks; safety, economic and financial criteria will be integrated within the protocols; (iii) integrating competences for the improvement and merging of electromagnetic scattering techniques and of data- processing techniques; this will lead to a novel freeware tool for the localization of buried objects

  3. Full-waveform inversion of GPR data for civil engineering applications

    Science.gov (United States)

    van der Kruk, Jan; Kalogeropoulos, Alexis; Hugenschmidt, Johannes; Klotzsche, Anja; Busch, Sebastian; Vereecken, Harry

    2014-05-01

    Conventional GPR ray-based techniques are often limited in their capability to image complex structures due to the pertaining approximations. Due to the increased computational power, it is becoming more easy to use modeling and inversion tools that explicitly take into account the detailed electromagnetic wave propagation characteristics. In this way, new civil engineering application avenues are opening up that enable an improved high resolution imaging of quantitative medium properties. In this contribution, we show recent developments that enable the full-waveform inversion of off-ground, on-ground and crosshole GPR data. For a successful inversion, a proper start model must be used that generates synthetic data that overlaps the measured data with at least half a wavelength. In addition, the GPR system must be calibrated such that an effective wavelet is obtained that encompasses the complexity of the GPR source and receiver antennas. Simple geometries such as horizontal layers can be described with a limited number of model parameters, which enable the use of a combined global and local search using the Simplex search algorithm. This approach has been implemented for the full-waveform inversion of off-ground and on-ground GPR data measured over horizontally layered media. In this way, an accurate 3D frequency domain forward model of Maxwell's equation can be used where the integral representation of the electric field is numerically evaluated. The full-waveform inversion (FWI) for a large number of unknowns uses gradient-based optimization methods where a 3D to 2D conversion is used to apply this method to experimental data. Off-ground GPR data, measured over homogeneous concrete specimens, were inverted using the full-waveform inversion. In contrast to traditional ray-based techniques we were able to obtain quantitative values for the permittivity and conductivity and in this way distinguish between moisture and chloride effects. For increasing chloride

  4. TECHNICAL SOLUTIONS TO CREATE ESTHETICAL CIVIL ENGINEERING STRUCTURES USING THE GEOSYNTHETICS MATERIALS

    Directory of Open Access Journals (Sweden)

    Teodor Eugen Man

    2010-01-01

    Full Text Available Geosynthetics is the term used to describe a range of generally polymeric products used to solve some civil engineeringproblems. The term is generally regarded to encompass eight main product categories: geotextiles, geogrids, geonets,geomembranes, geosynthetic clay liners, geofoam, geocells (cellular confinement and geocomposites. The syntheticpolymeric nature of these products makes them suitable for use in the ground where high levels of durability arerequired. Not only because, properly formulated, they can also be used in exposed applications. Geosynthetics areavailable in a wide range of forms and materials, each to suit a slightly different end use. These products have a widerange of applications and are currently used in many civil, geotechnical, transportation, geoenvironmental, hydraulic,and private development applications including roads, airfields, railroads, embankments, retaining structures,reservoirs, canals, dams, erosion control, sediment control, landfill liners, landfill covers, mining, aquaculture andagriculture. The paper presents basic aspects of geotextiles, drainage, geocomposite designissues and technicalsolutions of their use.

  5. TECHNICAL SOLUTIONS TO CREATE ESTHETICAL CIVIL ENGINEERING STRUCTURES USING THE GEOSYNTHETICS MATERIALS

    OpenAIRE

    Teodor Eugen Man; Attila Blenesi-Dima; Laura Constantinescu

    2010-01-01

    Geosynthetics is the term used to describe a range of generally polymeric products used to solve some civil engineeringproblems. The term is generally regarded to encompass eight main product categories: geotextiles, geogrids, geonets,geomembranes, geosynthetic clay liners, geofoam, geocells (cellular confinement) and geocomposites. The syntheticpolymeric nature of these products makes them suitable for use in the ground where high levels of durability arerequired. Not only because, properly ...

  6. On the integration of Building Information Modelling in undergraduate civil engineering programmes in the United Kingdom.

    OpenAIRE

    Bataw, Anas

    2016-01-01

    The management of data, information and knowledge through the project life cycle of buildings and civil infrastructure projects is becoming increasingly complex. In an attempt to drive efficiencies and address this complexity, the United Kingdom (UK) Government has mandated that Building Information Modelling (BIM) methods must be adopted in all public sector construction projects from 2016. Emerging from the US Department of Defence, BIM is an approach to the co-ordination of design and prod...

  7. COST Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar": first-year activities and results

    Science.gov (United States)

    Pajewski, Lara; Benedetto, Andrea; Loizos, Andreas; Slob, Evert; Tosti, Fabio

    2014-05-01

    This work aims at presenting the first-year activities and results of COST (European COoperation in Science and Technology) Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar". This Action was launched in April 2013 and will last four years. The principal aim of COST Action TU1208 is to exchange and increase scientific-technical knowledge and experience of GPR techniques in civil engineering, whilst simultaneously promoting throughout Europe the effective use of this safe and non-destructive technique in the monitoring of infrastructures and structures. Moreover, the Action is oriented to the following specific objectives and expected deliverables: (i) coordinating European scientists to highlight problems, merits and limits of current GPR systems; (ii) developing innovative protocols and guidelines, which will be published in a handbook and constitute a basis for European standards, for an effective GPR application in civil- engineering tasks; safety, economic and financial criteria will be integrated within the protocols; (iii) integrating competences for the improvement and merging of electromagnetic scattering techniques and of data- processing techniques; this will lead to a novel freeware tool for the localization of buried objects, shape-reconstruction and estimation of geophysical parameters useful for civil engineering needs; (iv) networking for the design, realization and optimization of innovative GPR equipment; (v) comparing GPR with different NDT techniques, such as ultrasonic, radiographic, liquid-penetrant, magnetic-particle, acoustic-emission and eddy-current testing; (vi) comparing GPR technology and methodology used in civil engineering with those used in other fields; (vii) promotion of a more widespread, advanced and efficient use of GPR in civil engineering; and (viii) organization of a high-level modular training program for GPR European users. Four Working Groups (WGs) carry out the research activities. The first WG

  8. Integrating human factors knowledge into certification: The point of view of the Internatioanal Civil Aviation Organization (ICAO)

    Science.gov (United States)

    Maurino, Daniel; Galotti, Vincent

    1994-01-01

    It is appropriate here to repeat the analogy described in the introduction to this paper which is that: The consideration of human factors requirements during the design stage of advanced, new technology systems may be seen as resting over a three-legged stool. The first leg, the equipment that a system will utilize to achieve its goals, has traditionally attracted ergonomic considerations associated with equipment design, usually centered around 'knobs and dials.' Lately, this view has expanded to include the so-called other important aspect of Human Factor's study which deals with the cognitive, behaviorial and social processes of the human operators. Study in this area must be furthered. The second leg of the stool, the procedures to operate the equipment, however, has been largely unaddressed. Procedures are not inherent to equipment, but must be developed. The importance of proper human factors consideration in the design of procedures can not be overstated. Lastly, the third leg of the stool, the certification of personnel who will operate the equipment, is very much underway, but far from being complete. The real quest now, however, is to integrate these three legs into an indivisible one. Finally, and most importantly, this workshop and its topic are extremely timely in that we are at the dawn of the most ambitious development ever undertaken in international civil aviation. This would allow us the rather unique opportunity to put theory into practice in the near future by ensuring that the concepts developed and furthered by this workshop and the follow-up are implemented in the design and certification of the ICAO future CNS/ATM systems described earlier in this paper. Now is the time to incorporate human factors requirements during the certification processes of these systems. This might act as a test to the feasibility of these ideas. Such endeavors represent a challenge for the research, engineering, training, operational and regulatory communities

  9. News in engineering education in Spain effective from 2010 in presence of external changes and mixed crisis, looking mostly to agro and civil engineers

    Science.gov (United States)

    Anton, J. M.; Sanchez, M. E.; Grau, J. B.; Andina, D.

    2012-04-01

    The engineering careers models were diverse in Europe, and are adopting now in Spain the Bolonia process for European Universities. Separated from older Universities, that are in part technically active, Civil Engineering (Caminos, Canales y Puertos) started at end of 18th century in Spain adopting the French models of Upper Schools for state civil servants with exam at entry. After 1800 intense wars, to conserve forest regions Ingenieros de Montes appeared as Upper School, and in 1855 also the Ingenieros Agrónomos to push up related techniques and practices. Other Engineers appeared as Upper Schools but more towards private factories. These ES got all adapted Lower Schools of Ingeniero Tecnico. Recently both grew much in number and evolved, linked also to recognized Professions. Spanish society, into European Community, evolved across year 2000, in part highly well, but with severe discordances, that caused severe youth unemployment with 2008-2011 crisis. With Bolonia process high formal changes step in from 2010-11, accepted with intense adaptation. The Lower Schools are changing towards the Upper Schools, and both that have shifted since 2010-11 various 4-years careers (Grado), some included into the precedent Professions, and diverse Masters. Acceptation of them to get students has started relatively well, and will evolve, and acceptation of new grades for employment in Spain, Europe or outside will be essential. Each Grado has now quite rigid curricula and programs, MOODLE was introduced to connect pupils, some specific uses of Personal Computers are taught in each subject. Escuela de Agronomos centre, reorganized with its old name in its precedent buildings at entrance of Campus Moncloa, offers Grados of Agronomic Engineering and Science for various public and private activities for agriculture, Alimentary Engineering for alimentary activities and control, Agro-Environmental Engineering more related to environment activities, and in part Biotechnology also

  10. Proposal to negotiate, without competitive tendering, a contract for the provision of architectural and civil engineering services for the construction of the Globe of Innovation

    CERN Document Server

    2003-01-01

    This document concerns the award of a contract for the provision of architectural and civil engineering services for the construction of the Globe of Innovation. For the reasons explained in this document, the Finance Committee is invited to agree to the negotiation of a contract, without competitive tendering, with the consortium GROUPE H (CH) - CHARPENTE CONCEPT (CH), for the provision of architectural and civil engineering services related to the re-erection of the Globe of Innovation, for a total amount not exceeding 850 000 Swiss francs, not subject to revision. The consortium has indicated the following distribution by country of the contract value covered by this adjudication proposal: CH-100 %.

  11. Use of the Colorado SURGE System for Continuing Education for Civil Engineers.

    Science.gov (United States)

    Fead, J. W. N.

    The Colorado State University Resources in Graduate Education (SURGE) program is described in this report. Since it is expected that not all the participants in a graduate engineering program will be able to attend university-based lectures, presentations are video-taped and transported to industrial plants, engineering offices, and other…

  12. Integrated undergraduate optical engineering education at West Point

    Science.gov (United States)

    Litynski, Daniel M.; Sayles, Andre H.; Shoop, Barry L.; Tousley, Bradford C.

    1995-10-01

    In meeting the growing demand for graduates who have background in optical engineering,the Department of Electrical Engineering and Computer Science and the Photonics Research Center at the U.S. Military Academy have jointly developed an instructional program that familiarizes every student with principles of laser operation and provides undergraduate research opportunities in optics for electrical engineering majors and others. The program includes a series of laboratory demonstrations in the Photonics Research Center for students in all majors during their sophomore year. For electrical engineering majors, the program also offers a senior level photonics engineering course, advanced individual study in laser applications, and a variety of capstone design projects. Advanced individual study may include up to three semesters of experimental research similar to masters degree thesis work in a graduate program, while the capstone project is accomplished in one semester by design teams based on the design-build- test methodology. Both types of projects address real-world requirements specified by faculty advisors or external mentors. Our integrated approach to optics education supports ongoing state-of-the-art research in the Photonics Research Center and provides technically qualified graduates to meet the demands of the field Army of the 21st century.

  13. Successfully Managing the Experimental Area of a Large Physics Experiment from Civil Engineering to the First Beams

    CERN Document Server

    Butin, F

    2010-01-01

    The role of "Experimental Area Manager" supported by a well organized, charismatic and motivated team is absolutely essential for managing the huge effort needed for a multi-cultural, multi-disciplinary installation of cathedral-size underground caverns housing a billion dollar physics experiment. Between the years 2002 and 2008, we supervised and coordinated the ATLAS work site at LHC, from the end of the civil engineering to the first circulating beams, culminating with 240 workers on the site, 24 hours a day, 7 days a week, with activities taking place simultaneously on the surface, in the 60 m shafts and in the 100 m underground experimental cavern. We depict the activities preparation scheme (including tasks ranging from the installation of 280 ton cranes to super-delicate silicon detectors), the work-site organization method, the safety management that was a top priority throughout the whole project, and the opencommunication strategy that required maintaining permanent public visits. The accumulation o...

  14. Case study in Mexico: the civil engineering students give opinion about their weaknesses at the time they leave the university

    Directory of Open Access Journals (Sweden)

    Rómel G Solís Carcaño

    2010-03-01

    Full Text Available This research deals with the problem of the perception, that the civil engineering students have, about the profession at the time when they conclude their studies. The research methods used are based in a qualitative and exploratory approach in order to get the students perceptions of their professional weaknesses at the time they leave the university. These perceptions are complemented and contrasted with those coming from professors and employers that interact with students during their studies and when they get involved in the professional practice, respectively. The results showed that, accordingly to their experiences, the students have a narrow vision of their proffesion. In addition, the student's opinions about their weaknesses when they started their professional studies and about the curricular contents they considered as low in utility and high in difficulty was also explored.

  15. Material Production for an EST Course: Coursebook Design for the English Training Programme for Architects and Civil Engineers

    Directory of Open Access Journals (Sweden)

    Yong Chen

    2015-11-01

    Full Text Available This paper presents the material production of an EST (English for Science and Technology course in an English training programme for architects and civil engineers. The programme was specially designed for the construction professionals whose needs were investigated and analysed by the trainers, ESP (English for Specific Purposes specialists from the British Council and Chinese counterparts. The article firstly focuses on the theories of needs analysis which support the investigation and analysis of the programme. After that, the needs of this programme (for both organization and participants are recognized and organized with illustration of programme framework and a particular course (EST syllabus. Then the literature of material design is reviewed and the rationale for the material writing is discussed with the presentation of a sample unit.

  16. Address Points, Published in Not Provided, Shield Engineering, Inc..

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Address Points dataset as of Not Provided. Data by this publisher are often provided in Not Applicable coordinate system; in a Not Applicable projection; The...

  17. Imagerie par résonance magnétique appliquée aux matériaux du génie civil Magnetic Resonance Imaging Applied to Civil Engineering Materials

    Directory of Open Access Journals (Sweden)

    Coussot P.

    2006-12-01

    Full Text Available Un imageur par résonance magnétique dédié aux matériaux du génie civil et de la construction est actuellement en cours d'acquisition par le LCPC (Laboratoire Central des Ponts et Chaussées. Il sera géré par le LMSGC à Champs-sur-Marne et installé dans les locaux de l'IFI (Institut francilien d'Ingénierie. De nombreuses collaborations avec des laboratoires et des entreprises sont envisagées et certaines déjà mises en place. D'un point de vue général, les recherches concerneront les transferts et changements de phase dans les milieux granulaires et poreux. Une série de dispositifs de recherche complémentaire est à l'étude. Ceux-ci permettront de solliciter les échantillons (chauffage, refroidissement, écoulement, transfert, fissuration tout en réalisant des images de la structure interne. Ceci nous permettra de mettre en relation les propriétés macroscopiques des matériaux et leurs évolutions au niveau mésoscopique. A magnetic resonance imager for use with civil engineering and construction materials is being acquired by the LCPC (Laboratoire Central des Ponts et Chaussées. It will be managed by the LMSGC at Champs-sur-Marne and will be installed on the premises of the IFI (Institut francilien d'Ingénierie. Numerous joint projects between laboratories and industry are contemplated and some are already under way. The general outlook for these research projects is to study transfers and phase changes in granular porous media. A number of supplementary research devices are being studied. These devices will make it possible to submit samples to heating, cooling, flow, transfer and fissuring while recording images of their internal structure. This will allow us to discover the relationship between the macroscopic properties of materials and mesoscopic changes.

  18. Perceptions of Academic Staff towards Accommodating Students with Disabilities in a Civil Engineering Undergraduate Program in a University in South Africa

    Science.gov (United States)

    Mayat, Nafisa; Amosun, Seyi Ladele

    2011-01-01

    This study explored the perceptions of academic staff towards admission of students with disabilities, and their accommodation once accepted into an undergraduate Civil Engineering program in a South African university. Qualitative responses relating to the perceptions of five academic staff were obtained through semi-structured interviews. The…

  19. DYNET project: DAAD joint curriculum development in civil engineering of University of Niš

    OpenAIRE

    Stojić Dragoslav; Đorđević Đorđe; Stojić Jasmina

    2008-01-01

    DYNET Project has greatly contributed to the development of high engineering education at the University of Niš, since year 2000. This project has been financed by the German DAAD program, in the framework of the South East Europe Stability Pact, and the goal of the project is primarily development of high education in the region, and education of young engineers. The project began at the Ruhr University of Bochum (RUB) in cooperation with the Universities of Niš (UN), Skopje and Sarajevo, an...

  20. Tissue engineering of bone: the reconstructive surgeon's point of view

    OpenAIRE

    Kneser, U; Schaefer, D. J.; Polykandriotis, E; Horch, R E

    2007-01-01

    Bone defects represent a medical and socioeconomic challenge. Different types of biomaterials are applied for reconstructive indications and receive rising interest. However, autologous bone grafts are still considered as the gold standard for reconstruction of extended bone defects. The generation of bioartificial bone tissues may help to overcome the problems related to donor site morbidity and size limitations. Tissue engineering is, according to its historic definition, an “interdisciplin...

  1. Key to internationalization of the civil engineering consulting firms. A success story: TYPSA group

    Directory of Open Access Journals (Sweden)

    Mª Ángeles Rastrollo Horrillo

    2014-05-01

    Full Text Available Purpose: To progress in the identification of the characteristics of the engineering consulting firms sector that influence the internationalization as well as profiling the decisions that shape their internationalisation strategy. Design/methodology: The applied methodology combines both the review of the academic literature and practical perspective based on a case study. The main source of data comes from a number of semi-structured interviews. In order to allow for the triangulation of data, additional data from the review of the documentation of the enterprise as well as from professional published reports on the sector was collected. Contributions and results: Three distinctive features of the engineering consulting firms and on the way they condition their internationalisation strategy were identified. The case analysis has allowed highlighting elements of the organizational, human and relational assets underpinning the internationalisation strategy f these companies. Research limitations/implications: The mains limitations of this research are related to the study of only one case for the qualitative method. For that reason, the results are not generalizable. Practical implications: The results could help engineering consulting firms in defining their internationalisation strategy. Originality/value: This article contributes to the literature on the internationalisation of the services sector by filling the gap in the concrete issues of the internationalisation of engineering consulting firms.

  2. Environmental guidelines for reuse of ash in civil engineering applications - phase 2; Miljoeriktlinjer foer askanvaendning i anlaeggningsbyggande - etapp 2

    Energy Technology Data Exchange (ETDEWEB)

    Bendz, David; Wik, Ola; Elert, Mark; Haakansson, Karsten

    2006-07-15

    Producers, authorities and users have acknowledged the need for common environmental guidelines for residues. The objective of this project has been to develop a proposal for common environmental guidelines for reuse of ash in civil engineering applications. The project has a narrow risk assessment perspective and focus on a set of substances where a well developed environmental policy and knowledge are available. Health aspects for construction workers are not covered in the project. The starting point in the risk assessment is the assumption that ashes may be used just like any conventional construction material. Special requirements or regulations regarding precautionary actions in the handling of ashes, regarding the site or surroundings will be avoided. The guiding principle has been the precautionary principle: reuse of ash is acceptable only if it constitute an insignificant risk to health and environment. The calculations are based on defined emission- and exposure scenarios. The concept of insignificant risk imply that the impact in the defined points of compliance does not exceed established health- and environmental criteria. The model address health risks associated with spreading of particles and exposure by dust, oral intake, dermal contact and intake by vegetables or wild grown berries and consumption of ground water. Off-site environmental effects in surface waters and in soil as well as health- and environmental risks in the post use phase are also considered. Exposure by dust is addressed in the same way as in the Swedish Environmental Protection Agency's guidelines for contaminated soil. The guidelines values for exposure by dust, oral intake, dermal contact and intake by vegetables or wild grown berries are total content, whereas the guidelines for exposure by consumption of ground water or environmental effects in surface waters are based on leaching properties of the ash. The guidelines rely on a conceptual model, defined emissions and

  3. 75 FR 2463 - Continuing Contract for Civil Works Project Managed by the United States Army Corps of Engineers...

    Science.gov (United States)

    2010-01-15

    ... Department of the Army 48 CFR Parts 5132, 5136, and 5152 RIN 0710-AA69 Continuing Contract for Civil Works... Civil Works projects only. This proposal is in response to a recurring statutory provision that requires.... SUPPLEMENTARY INFORMATION: A. Background The new funding clause for civil works projects includes...

  4. MULTIMEDIA TECHNOLOGIES FOR TRAINING FOR "DESCRIPTIVE GEOMETRY AND ENGINEERING GRAPHICS" COURSE FOR STUDENTS OF THE FACULTY OF CIVIL ENGINEERING IN KUBGAU

    Directory of Open Access Journals (Sweden)

    Serga G. V.

    2015-03-01

    Full Text Available The article examines the teaching descriptive geometry and engineering graphics on Faculty of Civil Engineering, higher-motivation of students to obtain needed competence to adopt competently compensation-drawings. The article describes the basic methods of conducting classes on the subject "Descriptive Geometry and Engineering Graphics" for students enrolled in the specialty 08.05.01 "Construction of unique buildings and structures." For lectures and laboratory classes in the department of descriptive geometry and graphics were developed multimedia courses with animation for all studied subjects, educational presentations that reveal the specifics of the discipline into account peculiarities of the educational process of learning in the Kuban State Agricultural university. Multimedia courses using enables us to model a situation that forces students to analyze, compare the solves of the task. Students develop an algorithmic way of thinking, formed the ability to think and act optimally variability. The use of multimedia development at the Department of Descriptive Geometry and Graphics showed an increase of performance results compared to the previous years of employment without presentation. It indicates that the use of multimedia lectures and laboratory exercises improves the efficiency and quality of education, as well as gives an opportunity to a greater extent to explain the learning material for students

  5. Non-linear auto-parametric vibrations in civil engineering systems

    Czech Academy of Sciences Publication Activity Database

    Náprstek, Jiří

    Stirlingshire, Scotland: Saxe-Coburg publications, 2009 - (Topping, B.; Costa, L.; Barros, R.), s. 293-317 ISBN 978-1-874672-42-5 R&D Projects: GA AV ČR(CZ) IAA200710902; GA ČR(CZ) GA103/09/0094 Institutional research plan: CEZ:AV0Z20710524 Keywords : non-linear vibration * auto-parametric systems * dynamic stability Subject RIV: JM - Building Engineering

  6. ClinicalKey: a point-of-care search engine.

    Science.gov (United States)

    Vardell, Emily

    2013-01-01

    ClinicalKey is a new point-of-care resource for health care professionals. Through controlled vocabulary, ClinicalKey offers a cross section of resources on diseases and procedures, from journals to e-books and practice guidelines to patient education. A sample search was conducted to demonstrate the features of the database, and a comparison with similar tools is presented. PMID:23394422

  7. The implementation of a multimedia learning environment for graduate civil engineers

    Directory of Open Access Journals (Sweden)

    Peter Jagodzinski

    1995-12-01

    Full Text Available Underlying our approach to the development of a Multimedia Learning Environment (MLE is the proposition that conventional learning needs analysis, for Computer-Based Learning does not address the richness of delivery possible with MLEs. We propose that knowledge-engineering techniques (from the field of Artificial Intelligence can provide a richer understanding of the domain, thus enabling a better MLE to be produced. The knowledge-engineering approach we have used, outlined in this paper, involved acquiring knowledge from a range of sources, then analysing this knowledge so that individual knowledge items could be categorized according to identified underlying knowledge-representation paradigms which each imply their own, most suitable, presentation style. This knowledge engineering analysis was then used to select an instructional model capable of conveying all the acquired types of knowledge in their paradigmatic styles, and detailed and adaptable enough to be implemented on a computer. The chosen model, the Cognitive Apprenticeship Model (CAM, was explicitly used as the basis for the architecture of the MLE.

  8. 实例解析土建工程综合单价的应用%Example analysis on the application of comprehensive unit price of civil engineering

    Institute of Scientific and Technical Information of China (English)

    袁惠燕

    2012-01-01

    指出当拟建土建工程项目要求与计价表子目工作内容不完全相符时,不能直接套用综合单价,应根据不同情况分别加以换算,从土建工程实例方面进行了分析,总结了不同情况下的换算公式,归纳简化了综合单价的计算公式,从根本上解决了综合单价换算复杂的问题。%Pointed out that when the plan project requirements and the meter specific item work content doesn't agree with,not directly applied the comprehensive unit price,but also should according to different situations make respectively calculation.This paper analyzed from civil engineering examples,summarized the conversion formula under different conditions,simplified and integrated the computation formula of the comprehensive unit price,solved the conversion complex problem of comprehensive unit price from the fundamental.

  9. A floating point engine for lattice gauge calculations

    Energy Technology Data Exchange (ETDEWEB)

    Husby, D.; Atac, R.; Cook, A.; Deppe, J.; Fischler, M.; Gaines, I.; Nash, T.; Pham, T.; Zmuda, T.; Eichten, E.

    1988-11-01

    The latest in low cost computing solutions from the Fermilab Advanced Computer Program is targeted at Lattice Gauge theory calculations and delivers supercomputer performance at a fraction of the cost. A typical system with 256 processors, 2.5 Gigabytes of memory, and 64 Gigabytes of on-line tape storage, delivers a peak performance of 5 billion floating point operations per second. The programming environment, Canopy, provides a comprehensive, hardware independent, distributed processing platform from within the more familiar environments of FORTRAN, C, and UNIX. This paper describes the individual processing elements of the system and gives a brief description of the Canopy software. 8 refs., 3 figs.

  10. Academic Training Lecture Regular Programme: How Large-Scale Civil Engineering Projects Realise the Potential of a City

    CERN Multimedia

    2012-01-01

    How Large-Scale Civil Engineering Projects Realise the Potential of a City (1/3), by Bill Hanway (Excecutive Director of Operations, AECOM Europe).   Wednesday, June 6, 2012 from 11:00 to 12:00 (Europe/Zurich) at CERN ( 80-1-001 - Globe 1st Floor ) In this series of three special lectures, leading experts from AECOM would explore the impact of a trio of major projects on a single city. In common with every metropolis, London has run-down districts and infrastructure in need of upgrading. The lectures propose to cover three of the biggest challenges: regenerating run-down areas; reducing congestion and transporting people more efficiently; and improving water and wastewater systems. Each project contributes to a collective public aim - to realise the potential of a growing city, and ensure its healthy, sustainable and competitive future. Lecture 1: Into the lecture series and The London 2012 Olympic Games Most cities share a group of common complex challenges – growing populations, agei...

  11. Application of a moment tensor inversion code developed for mining-induced seismicity to fracture monitoring of civil engineering materials

    Science.gov (United States)

    Linzer, Lindsay; Mhamdi, Lassaad; Schumacher, Thomas

    2015-01-01

    A moment tensor inversion (MTI) code originally developed to compute source mechanisms from mining-induced seismicity data is now being used in the laboratory in a civil engineering research environment. Quantitative seismology methods designed for geological environments are being tested with the aim of developing techniques to assess and monitor fracture processes in structural concrete members such as bridge girders. In this paper, we highlight aspects of the MTI_Toolbox programme that make it applicable to performing inversions on acoustic emission (AE) data recorded by networks of uniaxial sensors. The influence of the configuration of a seismic network on the conditioning of the least-squares system and subsequent moment tensor results for a real, 3-D network are compared to a hypothetical 2-D version of the same network. This comparative analysis is undertaken for different cases: for networks consisting entirely of triaxial or uniaxial sensors; for both P and S-waves, and for P-waves only. The aim is to guide the optimal design of sensor configurations where only uniaxial sensors can be installed. Finally, the findings of recent laboratory experiments where the MTI_Toolbox has been applied to a concrete beam test are presented and discussed.

  12. Development of rapid, continuous calibration techniques and implementation as a prototype system for civil engineering materials evaluation

    International Nuclear Information System (INIS)

    Until recently, civil engineering material calibration data could only be obtained from material sample cores or via time consuming, stationary calibration measurements in a limited number of locations. Calibration data are used to determine material propagation velocities of electromagnetic waves in test materials for use in layer thickness measurements and subsurface imaging. Limitations these calibration methods impose have been a significant impediment to broader use of nondestructive evaluation methods such as ground-penetrating radar (GPR). In 2006, a new rapid, continuous calibration approach was designed using simulation software to address these measurement limitations during a Federal Highway Administration (FHWA) research and development effort. This continuous calibration method combines a digitally-synthesized step-frequency (SF)-GPR array and a data collection protocol sequence for the common midpoint (CMP) method. Modeling and laboratory test results for various data collection protocols and materials are presented in this paper. The continuous-CMP concept was finally implemented for FHWA in a prototype demonstration system called the Advanced Pavement Evaluation (APE) system in 2009. Data from the continuous-CMP protocol is processed using a semblance/coherency analysis to determine material propagation velocities. Continuously calibrated pavement thicknesses measured with the APE system in 2009 are presented. This method is efficient, accurate, and cost-effective.

  13. Petrochemical products for use in civil engineering works; Doboku shizai to shite doshitsu anteiyo ni shiyosareru sekka seihin

    Energy Technology Data Exchange (ETDEWEB)

    Iwasaki, K.

    1998-03-01

    This paper describes classification of geosynthetics and their usage. Geosynthetics are high polymer fiber and plastic products, such as geotextile, geoglid, geonet, and geomembrane, which are used for civil engineering works. Geoglid is used for reinforcement of steep gradient banking with a slope angle over 45deg. Geoglid, geonet and non-woven cloth are used for reinforcement and drain of gentle gradient banking with a slope angle less than 45deg. These are placed in layers. Geoglid and geonet are also used for reinforcement, drain and separation of the surface layer of weak ground. Geoglid is used for protection of collapse of slope and for reinforcement of foundation for structures. Non-woven cloth and drain plate are combined for drain of deep layer in the weak ground. Geoglid and geomembrane are used for reinforcement, separation and drain of road-bed. Non-woven cloth and geonet are used for protection of water leakage in tunnels and for water barrier of dams, water reservoirs, and industrial waste disposal facilities. 27 figs., 1 tab.

  14. STRATEGY FOR IMPROVEMENT OF SAFETY AND EFFICIENCY OF COMPUTER-AIDED DESIGN ANALYSIS OF CIVIL ENGINEERING STRUCTURES ON THE BASIS OF THE SYSTEM APPROACH

    Directory of Open Access Journals (Sweden)

    Zaikin Vladimir Genrikhovich

    2012-12-01

    Full Text Available The authors highlight three problems of the age of information technologies and proposes the strategy for their resolution in relation to the computer-aided design of civil engineering structures. The authors express their concerns in respect of globalization of software programmes designated for the analysis of civil engineering structures and employed outside of Russia. The problem of the poor quality of the input data has reached Russia. Lately, the rate of accidents of buildings and structures has been growing not only in Russia. Control over efficiency of design projects is hardly performed. This attitude should be changed. Development and introduction of CAD along with the application the efficient methods of projection of behaviour of building structures are in demand. Computer-aided calculations have the function of a logical nucleus, and they need proper control. The system approach to computer-aided calculations and technologies designated for the projection of accidents is formulated by the authors. Two tasks of the system approach and fundamentals of the strategy for its implementation are formulated. The study of cases of negative results of computer-aided design of engineering structures was performed and multi-component design patterns were developed. Conclusions concerning the results of researches aimed at regular and wide-scale implementation of the strategy fundamentals are formulated. Organizational and innovative actions concerning the projected behaviour of civil engineering structures proposed in the strategy are to facilitate: safety and reliability improvement of buildings and structures; saving of building materials and resources; improvement of labour efficiency of designers; modernization and improvement of accuracy of projected behaviour of buildings and building standards; closer ties between civil and building engineering researchers and construction companies; development of competitive environment to boost

  15. Reuse of coal mining wastes in civil engineering. Part 2: Utilization of minestone

    International Nuclear Information System (INIS)

    The oldest method of minestone utilization is reclamation of spoil heaps by adapting them to the landscape by afforestation or agricultural management. The best method is, however, complete removal of the wastes. Hence, for many years research has been carried out to find new ways of minestone utilization to minimize disposal cost and harmful environmental effects. Earth structures offer the best possibilities of minestone utilization. Investigations conducted in recent years in Germany, the United Kingdom, France, Belgium, the Netherlands and also in Poland have led to the use of many tones of wastes in the construction of road and railroad banks, river embankments, dykes and dams, filling of land depressions and open pits, as well as for sea wharfs and land reclamation. This paper presents descriptions of minestone applications to hydraulic, harbor and road engineering as well as to mine backfilling and restoration of derelict land. Effective management of minestone is still the principal problem with respect to safety, economics and environmental protection. Hence, the propagation of minestone utilization of known sources and the search for new methods of its management are essential. Two sections in this review have been devoted to the prevention of spontaneous heating and combustion of minestone and to the impact of minestone structures on the environment and its protection

  16. Knowledge creation and innovation in a civil engineering course for the first-year university students

    Science.gov (United States)

    Salmisto, Alpo; Nokelainen, Petri

    2015-09-01

    This article examines the application of knowledge creation learning and innovation to higher education in construction. The objectives are to demonstrate the application of the course based on knowledge creation learning to mass teaching and to analyse whether knowledge creation learning improves student motivation and learning. The empirical data (n = 120) consist of the results of a student survey from two university-level courses. The first course, Basics of Construction Management and Economics (n = 79), was developed on the basis of knowledge creation, and the second course, Building Project (n = 41), was implemented using the case-based learning method. The results, based on student self-assessments, showed that case-based learning supported the learning process more effectively than did the course based on knowledge creation. On the other hand, the results showed the relevance of applying knowledge creation-based learning to the mass teaching of construction in higher education. The findings of this empirical study suggest that more attention should focus on developing students' metacognitive skills in engineering education.

  17. Study and installation of concrete shielding in the civil engineering of nuclear construction (1960)

    International Nuclear Information System (INIS)

    The object of this report is to give technical information about high density concretes which have become very important for radiation biological shielding. The most generally used heavy aggregates (barytes, ilmenite, ferrophosphorus, limonite, magnetite and iron punching) to make these concretes are investigated from the point of view prospecting and physical and chemical characteristics. At first, a general survey of shielding concretes is made involving the study of components, mixing and placing methods, then, a detailed investigation of some high density concretes: barytes concrete, with incorporation of iron punching or iron shot, ferrophosphorus concrete, ilmenite concrete and magnetite concrete, more particularly with regard to grading and mix proportions and testing process. To put this survey in concrete form, two practical designs are described such as they have been carried out at the Saclay Nuclear Station. Specifications are given for diverse concretes and for making the proton-synchrotron 'Saturne' shielding blocks. (author)

  18. Energy evaluation on bounded nonlinear control laws for civil engineering applications

    Science.gov (United States)

    Gattulli, Vincenzo

    1994-09-01

    In the last decades researchers in the field of structural engineering have challenged the idea of facing natural hazard mitigation problems by adding to structures particular systems which are designed to protect buildings, bridges and other facilities from the damaging effects of destructive environmental actions. Among most protective systems and devices, active structural control, although having already reached the stage of full-implemented systems, still need theoretical investigation to achieve a complete exploitation of its capacity in reducing structural vibrations. In most of the operating systems (e.g. Soong and Reinhorn, 1993), linear control laws based on some quadratic performance function criteria are used since the design process for these linear strategies are fully developed and investigated. Moreover, the performances of structural systems controlled by linear techniques bring about some question concerning the complete and wise utilization of the capacity of control devices. Indeed, some of these inefficiencies are evident such as the inability to produce a significant peak response reduction in the first cycles of recorded or simulated time histories. (e.g. Reinhorn et al., 1993). Realizing that the expected maximum value for the required control force is a fundamental parameter in all processes to design the complete control system, in this paper it is shown that appropriate nonlinear control laws can significantly enhance the reduction of the system response under the same constraints imposed on the control force. Energy evaluation on the performance of different kinds of nonlinearities are reported such that a common base is built to perform comparative studies. These techniques have been successfully experimented on a structural model with ground excitations supplied by shaking table (e.g. Gattulli et al., 1994).

  19. BY THE EXPERIENCE OF FOREIGN INTERNSHIP AMONG RUSSIAN STUDENTS’ OF CIVIL ENGINEERING DEPARTMENT OF IZHSTU AT BRNO UNIVERSITY OF TECHNOLOGY (2013)

    OpenAIRE

    Valery P. Grahov; Yulia G. Kislyakova

    2015-01-01

    The aim of the study is to investigate the possibilities of foreign internships among Russian students. Methods. The methods involve general-scientific methods of theoretical research – analysis and synthesis. Results. The article is devoted to the analysis of foreign internships of Civil Engineering Department of Kalashnikov Izhevsk State Technical University in foreign universities for a specific period of time. The authors analyze the entry of Russian students into the European educational...

  20. The frequency-dependent elements in the code SASSI: A bridge between civil engineers and the soil-structure interaction specialists

    Energy Technology Data Exchange (ETDEWEB)

    Tyapin, Alexander [Atomenergoproject, 7/1 Bakuninskaya Str., Moscow 105005 (Russian Federation)]. E-mail: Atyapin@bvcp.ru

    2007-07-15

    After four decades of the intensive studies of the soil-structure interaction (SSI) effects in the field of the NPP seismic analysis there is a certain gap between the SSI specialists and civil engineers. The results obtained using the advanced SSI codes like SASSI are often rather far from the results obtained using general codes (though match the experimental and field data). The reasons for the discrepancies are not clear because none of the parties can recall the results of the 'other party' and investigate the influence of various factors causing the difference step by step. As a result, civil engineers neither feel the SSI effects, nor control them. The author believes that the SSI specialists should do the first step forward (a) recalling 'viscous' damping in the structures versus the 'material' one and (b) convoluting all the SSI wave effects into the format of 'soil springs and dashpots', more or less clear for civil engineers. The tool for both tasks could be a special finite element with frequency-dependent stiffness developed by the author for the code SASSI. This element can represent both soil and structure in the SSI model and help to split various factors influencing seismic response. In the paper the theory and some practical issues concerning the new element are presented.

  1. 谈土建工程项目现场施工管理%On the On-site Construction Management of Civil Engineering

    Institute of Scientific and Technical Information of China (English)

    郭宜旭

    2014-01-01

    The on-site construction management of civil engineering is an important content of the construction of building engineering. This paper describes several aspects of on-site construction management, and puts forward strategies to improve and strengthen on-site construction management.%土建工程项目的现场施工管理是建筑工程建设的重要内容。文章主要阐述了施工现场管理的几个方面,并在此基础上提出改进和加强施工现场管理的策略。

  2. Reverse engineering: point cloud generation with CMM for part modeling and error analysis

    OpenAIRE

    Manzoor Hussain M.; Sambasiva Rao CH.; Prasad K. E.

    2008-01-01

    From many decades reverse engineering (RE) has been used to make duplicate parts and part drawing prints in military and defence sectors. Scientific literature presents many different approaches for implementation of reverse engineering. Most of the studies are based on the analysis of point clouds acquired through coordinate measuring devices, such as, Coordinate Measuring Machines (CMMs), Optical Scanners or Interferometric Systems. In recent years, the development of computer technology re...

  3. A comparative study of oral health attitudes and behavior using the Hiroshima University - Dental Behavioral Inventory (HU-DBI) between dental and civil engineering students in Colombia

    Science.gov (United States)

    Jaramillo, Jorge A.; Jaramillo, Fredy; Kador, Itzjak; Masuoka, David; Tong, Liyue; Ahn, Chul; Komabayashi, Takashi

    2014-01-01

    The aim of this study was to use the Hiroshima University - Dental Behavioral Inventory (HU-DBI) to compare oral health attitudes and behavior of dental and civil engineering students in Colombia. The HU-DBI's survey consisting of twenty dichotomous responses (agree-disagree) regarding tooth brushing, was completed at University Antonio Narino for the dental students and the University of Cauca for the civil engineering students. The Spanish version of the HU-DBI questionnaire was taken by 182 of 247 dental students and 411 of 762 engineering students. The data was-statistically analyzed by the chi-square test and backward logistic regression. Compared to the engineering students, the dental students were more likely to agree with questions such as “I am bothered by the color of my gums”(OR = 2.2, 95% CI: 1.3-3.7),“I think I can clean my teeth well without using toothpaste” (OR = 3.0, 95% CI: 1.5-5.9), “I have used a dye to see how clean my teeth are” (OR = 2.9, 95% CI: 1.9-4.3), and “I have had my dentist tell me that I brush very well” (OR = 2.0, 95% CI: 1.3-3.1). The dental education curriculum in a dental school compared to a civil engineering school in Colombia indicated that a three-phase curriculum in didactics and clinics increased oral health attitudes and behavior from entry to graduation. PMID:23485597

  4. On Civility and Civilizations

    Institute of Scientific and Technical Information of China (English)

    DAVID GOSSET

    2010-01-01

    @@ At a time when misunderstand-ings between cultures run rampant, when walls of fear, prejudice and hatred divide the members of the human family, it is urgent to intensify the dialogue between civilizations. Under the new leadership of its Director General lrina Bokova, the United Nations Educational, Scientific and Cultural Organization (UNESCO) declared 2010 as the "Year for the Rapprochement of Cultures." In this context, the concerted reflections and actions of Europe and China can be highly meaningful.

  5. Atlas civil engineering

    CERN Multimedia

    2002-01-01

    The first things lowered to the cavern were not parts of the new detector or parts for the accelerator rather than the machines digging the cavern bigger and lifts that transport stones and other excess material up to the surface. This work was very demanding already.

  6. Current status of spallation product data. Nuclear engineering view-point

    International Nuclear Information System (INIS)

    Proton induced isotopic transformation in spallation targets of accelerator-driven systems (ADS) is becoming a key factor in selecting the reference target material design options. The present paper gives an outlook of the current status of data on spallation products from the view-point of nuclear engineering stressing the isotopes whose accumulation would significantly effect the target performance. (author)

  7. Constant-Power Engines in Flights to L4 point of the Earth-Moon System

    Directory of Open Access Journals (Sweden)

    Mircea DUMITRACHE

    2012-03-01

    Full Text Available The transfer is studied in the context of the classical Circular Restricted Three-Body Problem. The initial state is on a geosinchronous orbit and the terminal state is the L4 triangular Lagrangian point. The use of controllable acceleration engine by minimization of a time integral of the squared engine acceleration, the optimization problem is separated into two sub-problems: dynamical and parametric ones. Initial mass to constant output power ratio variation is mainly studied, depending on the transfer duration and initial thrust acceleration for fixed power jet (specific impulse is within the limits of the VASIMR magneto-plasma engine. The Two Point Boundary Value Problem is solved when the startup speed is circular or when the initial thrust acceleration is given. Time variation of the obtained state and control variables is represented relative to Earth in geocentric equatorial inertial system.

  8. Evaluation of environmental management resources (ISO 14001) at civil engineering construction worksites: a case study of the community of Madrid.

    Science.gov (United States)

    Rodríguez, Gracia; Alegre, Francisco Javier; Martínez, Germán

    2011-07-01

    In recent years, significant advances have been made in business organization and management. The growing demands of clients as well as the globalization of world markets are among the many factors that have led to the establishment of systems of quality control and environmental management as a competitive strategy for businesses. When compared to other professional sectors, the construction sector has been slower to respond to environmental problems and to adopt Environmental Management Systems (EMS). In the world today the ISO 14001 standard is currently the main frame of reference used by construction companies to implement this type of management system. This article presents the results of a general study regarding the evaluation of the application of the ISO 14001 standard at civil engineering construction worksites in the Community of Madrid (Spain), specifically pertaining to requirement 4.4.1, Resources, roles, responsibilities, and authority. According to requirement 4.4.1, company executives should appoint people responsible for implementing the EMS and also specify their responsibilities and functions. The personnel designated for supervising environmental work should also have sufficient authority to establish and maintain the EMS. The results obtained were the following: - EMS supervisors did not generally possess adequate training and solid experience in construction work and in the environment. Furthermore, supervisors were usually forced to combine their environmental work with other tasks, which made their job even more difficult. - Generally speaking, supervisors were not given sufficient authority and autonomy because productivity at the construction site had priority over environmental management. This was due to the fact that the company management did not have a respectful attitude toward the environment, nor was the management actively involved in the establishment of the EMS. - Insufficient resources were allocated to the Environmental

  9. Problem-Based Project-Oriented Learning: Educating and evaluating for new disciplines emerging in the interplay between the professions of civil engineering and architecture

    DEFF Research Database (Denmark)

    Mullins, Michael

    2006-01-01

    advantages in a search for solutions of which integrate these approaches. The Department of Architecture and Design (A&D) at Aalborg University has been intiated with the explicit aim to educate for new disciplines emerging in the interplay between the professions of civil engineering and architecture, and......University curricula are traditionally based on specialised discipline-specific subjects, which like engineering and architecture approach solutions to design problems with methods suited to their specific view of the issues. Problem-based learning models (PBL) offer a number of potential...... uses PBL and project-oriented models for its educational form. There is a distinct difference between engineering and architecture in their evolutionary backgrounds and their varying degree of emphasis on natural science. Both present different forms of problem solving that appeal to different learning...

  10. Research on Point and Arc Elasticity of Domestic Civil Aviation Passenger Demand Price%国内民航客运需求价格点弹性与弧弹性研究

    Institute of Scientific and Technical Information of China (English)

    张伟

    2013-01-01

      采用微观经济学的点弹性和弧弹性理论,对国内民航客运需求价格弹性进行初步对比研究。结合民航客运的自身特点,提出适用于民航客运需求价格弹性的点弹性和弧弹性分析方法,并采用此方法对国内民航客运市场进行分析,得出国内民航整体市场是富于弹性的和旺盛需求的结论,最后给出点弹性与弧弹性对比。%This article uses the theory of microeconomics about point and arc elasticity to do domestic civil aviation passenger demand price elasticities contrastive research. Combine with the characteristics of civil aviation passenger, building demand price point and arc elasticity analysis method which can be fit in civil aviation passenger, then analyze domestic civil aviation passenger market through such methods, acquiring the conclusion of domestic civil aviation is going to to be “elastic” and large market to be rigid demand, at last, give the comparison between point and arc elasticity.

  11. Web application to access U.S. Army Corps of Engineers Civil Works and Restoration Projects information for the Rio Grande Basin, southern Colorado, New Mexico, and Texas

    Science.gov (United States)

    Archuleta, Christy-Ann M.; Eames, Deanna R.

    2009-01-01

    The Rio Grande Civil Works and Restoration Projects Web Application, developed by the U.S. Geological Survey in cooperation with the U.S. Army Corps of Engineers (USACE) Albuquerque District, is designed to provide publicly available information through the Internet about civil works and restoration projects in the Rio Grande Basin. Since 1942, USACE Albuquerque District responsibilities have included building facilities for the U.S. Army and U.S. Air Force, providing flood protection, supplying water for power and public recreation, participating in fire remediation, protecting and restoring wetlands and other natural resources, and supporting other government agencies with engineering, contracting, and project management services. In the process of conducting this vast array of engineering work, the need arose for easily tracking the locations of and providing information about projects to stakeholders and the public. This fact sheet introduces a Web application developed to enable users to visualize locations and search for information about USACE (and some other Federal, State, and local) projects in the Rio Grande Basin in southern Colorado, New Mexico, and Texas.

  12. Islam dan Civil Society

    Directory of Open Access Journals (Sweden)

    Imam Sukardi

    2010-03-01

    Full Text Available The article tries to address the concept of civil society from varied perspectives. From a historical point of view, civil society demands not only the absent domination of state but also liberates individuals from the hegemony of state. The article shows that in Indonesia and Malaysian discourse, masyarakat madani is often used to represent the term of civil society. Using this conception, major values of civil society also share with basic ideas within the Medina Treaty in the history of Islam. These ideas include egalitarianism, human rights protection, participation, law and justice enforcement and pluralism. In this frame, the question on whether or not Islam is compatible with the concept of civil society is clearly answered. Muslims could benefit such a concept to build their awareness of being progressive and adaptive to social changes.

  13. The civil servant’s point of view on immigrants and acculturation in Finland. A Qualitative Attitude Approach

    OpenAIRE

    Alenius, Reetta

    2013-01-01

    The Act on Integration was passed in 2010 in order to promote the integration of immigrants and their participation in the society. According to that Act, those who come to Finland are entitled to an integration plan, which they prepare together with a civil servant. This study examines the attitudes that civil servants, working with immigrants, hold towards foreigners, immigration and immigrants. It also considers what importance those civil servants attach to different dimensions of th...

  14. Next-generation concurrent engineering: developing models to complement point designs

    Science.gov (United States)

    Morse, Elizabeth; Leavens, Tracy; Cohanim, Babak; Harmon, Corey; Mahr, Eric; Lewis, Brian

    2006-01-01

    Concurrent Engineering Design (CED) teams have made routine the rapid development of point designs for space missions. The Jet Propulsion Laboratory's Team X is now evolving into a 'next-generation CED; in addition to a point design, the Team develops a model of the local trade space. The process is a balance between the power of a model developing tools and the creativity of humal experts, enabling the development of a variety of trade models for any space mission. This paper reviews the modeling method and its practical implementation in the ED environment. Example results illustrate the benefit of this approach.

  15. Imagerie par résonance magnétique appliquée aux matériaux du génie civil Magnetic Resonance Imaging Applied to Civil Engineering Materials

    OpenAIRE

    Coussot P.

    2006-01-01

    Un imageur par résonance magnétique dédié aux matériaux du génie civil et de la construction est actuellement en cours d'acquisition par le LCPC (Laboratoire Central des Ponts et Chaussées). Il sera géré par le LMSGC à Champs-sur-Marne et installé dans les locaux de l'IFI (Institut francilien d'Ingénierie). De nombreuses collaborations avec des laboratoires et des entreprises sont envisagées et certaines déjà mises en place. D'un point de vue général, les recherches concerneront les transfert...

  16. METHODOLOGICAL SUBSTANTIATION OF PATTERNS OF DEVELOPMENT OF THE SYSTEM OF MANAGEMENT OF THE INVESTMENT AND CIVIL ENGINEERING INDUSTRY WITH ACCOUNT FOR ITS SYSTEMIC CHARACTERISTICS

    Directory of Open Access Journals (Sweden)

    Uvarova Svetlana Sergeevna

    2012-10-01

    Full Text Available The methodology of research of organizational and economic drivers of development of the civil engineering industry represents a cluster of interrelated methods, techniques, procedures, algorithms and models that shape up the basis for the development and implementation of effective management actions impacted by intrinsic fluctuations of the civil engineering industry, the local legislation, national and global economies. The proposed method contributes to the improvement of sustainability of construction companies and the construction industry. It also facilitates an inflow of capital into the investment sector of the construction industry and accelerates the economic growth of Russia. The proposed methodology is based on a synthesis of several scientific theories, such as the evolutionary theory, the theory of self-organization (the synergetic theory, the theory of changes and the catastrophe theory, the theory of cyclical development, the systems theory, the organizational theory, the institutional theory, and the pricing theory. There are many potential patterns of the system development; however, the awareness of the resonant excitation, feedback and the cumulative effect make it possible to predict the most probable changes. Random fluctuations are also exposed to these effects. Implementation of the proposed methodology makes it possible to generate science-based management solutions that ensure the development and implementation of effective management procedures.

  17. Study on protective facility information price management of civil air defense engineering%人防工程防护设备信息价格管理研究

    Institute of Scientific and Technical Information of China (English)

    张桂萍

    2015-01-01

    论述了人防工程防护设备价格信息管理存在的主要问题,对产生各种问题的原因进行了分析,提出了进一步开放市场、建立全国性的人防工程防护设备信息价网络系统、加强质量监督等对策,以维护防护设备市场的稳定性。%The paper discusses protective facility information price management problems of civil air defense engineering,analyzes various cau-ses,puts forward a series of countermeasures,such as opening market,establishing national civil air defense engineering protecting facility infor-mation price network system,and strengthening quality supervision and so on,with a view to maintain the stability of protective facility market.

  18. Smart composites. 6. Smart composite application technology (related to civil engineering and building constructions); Smart composite. 6. Smart composite oyo gijutsu (doboku kenchiku kanren)

    Energy Technology Data Exchange (ETDEWEB)

    Sugita, M. [Shimizu Corp., Tokyo (Japan)

    1997-09-15

    This paper summarizes the current status of developing smart composite materials in the building construction and civil engineering fields. Introducing intelligent structure systems into major structural members in civil engineering and building constructions contributes very highly to improving preservation of lives and properties and safety against unexpected disasters caused by such natural accidents as earthquakes and typhoons. Social needs for health monitoring functions may include (1) improvement in safety by predicting destruction of such infrastructures as expressways, railways, drinking water and sewage systems, electric power and gas plants, (2) improvement in safety of such structures as underground and undersea structures whose safety cannot be verified directly by visual checks, (3) prediction of breakdown of structures to which human being cannot make an access, such as atomic reactors, and (4) prediction of dribbling, avalanches, and sand and soil falls. Other needs may include economic effects, multi-functional materials, and improvement in living comfort. What could be said a development of materials having a sensor function and a self-restoring function has just started in Japan and the United States. 7 refs., 12 figs.

  19. The influences of scientific information on the growing in opinion for high level waste repository. Focusing on education in civil engineering course

    International Nuclear Information System (INIS)

    In this research, survey of awareness and attitude to high level radioactive waste (HLW) disposal on 36 students of a postgraduate course was conducted. They have been studying civil and rock engineering, so they belong to 'the Group' that acquires high education, culture and faculty to understand the science in geological disposal of HLW. First of all the awareness of danger or safety to HLW disposal was examined. Some 23% regard HLW disposal as safe, on the contrary 60% feel danger. This is similar to the awareness of the average public. And some 72% think that HLW should be disposal, but only 6% agree the repository in their town. It shows that the Group of high education has a tendency of calmly understand the necessity of disposal, but they also have a nature so-called 'not in my back yard (NIMBY)'. After that, the students were divided in two groups. Then, one group received information from the promoter, and another received information from opponents. The result of second questionnaire shows that the awareness of danger is affected strongly by given information even in this Group, but they become thoughtful and prudent in their opinion and decision-making as increasing information. Finally in this paper it is studied that 'what is the role of education of civil engineering?' and 'what is key issue in R and D of HLW disposal?' considering Public Acceptance. (author)

  20. Education and training requirements for a practicing civil engineer to qualify for registration in Australasia and the United Kingdom

    OpenAIRE

    Yeung, ATC

    2013-01-01

    The making a qualified and competent engineer requires education, practical training, and a professional assessment. Obtaining a professional registration is an indication of competence and willingness to shoulder the legal and social responsibilities required to be an engineer. It also gives the general public the sense of confidence for engineering works designed and constructed by engineers. The requirements and procedure of registration can be stipulated in law, and/or controlled by profe...

  1. Using the technology of ship reactors with a liquid-metal coolant in the civil nuclear power engineering of Russia

    International Nuclear Information System (INIS)

    One analyzes possibility to apply ship reactors with Pb-Bi coolant in civil nuclear power plants of Russia. Renovation of NPP units with Pb-Bi coolant reactor modulus is shown to be one of the most economically efficient ways to replace decommissioned capacities. The elaborated renovation of the Novo-Voronezh NPP old power units demonstrates that this option rules out most severe accidents

  2. 概念设计阶段起落架接地点设计%The Landing Gear Touchdown Point Design of Advanced Civil Jet Aircraft in Concept Design Phase

    Institute of Scientific and Technical Information of China (English)

    王跃

    2012-01-01

    针对现代民用飞机设计特点,尤其是某些新技术的应用和飞机系列化发展的需求,在充分吸收和借鉴传统飞机概念设计阶段起落架设计方法的基础上,从工程应用角度出发,总结并提出一套现代民用飞机概念设计阶段起落架接地点设计流程及方法。同时,按照设计流程将影响起落架接地点设计的限制因素划分为适航安全、性能、结构、空间布置、运营等影响因素,明晰各限制因素对设计产生的影响。%According to the design characteristics of advanced civil jet aircraft, especially about application of some new techniques and the requirements of family development, and based on traditional landing gear design method, the paper gives a study on a new design method of landing gear touchdown point in concept design phase from engineer design aspect. Meanwhile, following design steps, the restriction factors of landing gear touchdown point design are classified in safety, oerformance, structure, kinematics, ooeration, etc. Each restriction factor is clearlv described in the paner.

  3. 78 FR 5760 - Civil Monetary Penalty Inflation Adjustment

    Science.gov (United States)

    2013-01-28

    ... Department of the Army, Corps of Engineers 33 CFR Part 326 RIN 0710-AA66 Civil Monetary Penalty Inflation... Engineers (Corps) is proposing to amend its regulations to adjust its Class I civil penalties under the... civil penalties to account for inflation is required by the Federal Civil Penalties Inflation...

  4. [Changes in clinical standards and the need for adjusting legal standards of care from the point of view of civil law].

    Science.gov (United States)

    Rosenberger, Rainer

    2007-01-01

    The legal standard of medical care is laid down in Sect. 276 of the German Civil Code (principle of due diligence). It applies to both contractual and tortious liability and likewise to the treatment of patients insured under the statutory health insurance scheme and self-payers. The legal standard of care conforms to the clinical standards because medical liability means medical professional liability. Liability law does not distinguish between different standards of care in the treatment of patients insured under the statutory health insurance scheme on the one hand and privately insured patients on the other. Changes in clinical standards immediately affect liability law without the need for formal adaptation of the legal standard of care. Liability law cannot claim more diligence than that owed from a medical point of view. Legislative changes that result in a lowering of medical standards (reduction in the quality of treatment) will have to be accepted by liability law, even if these are regulations pertaining to Social Law (SGB V, Book 5 of the German Social Code). In this respect, the principle of legal unity applies. In consideration of this kind of changes the due diligence requirements for the treatment of patients insured under the statutory health insurance scheme and privately insured patients remain basically equal. If these changes lead to an increase of risk for the patient, the resulting liabilities are not to be attributed to the therapist. What remains to be seen is whether there will be an increased attempt to minimise risk by "additionally purchasing health care services". PMID:18225404

  5. BY THE EXPERIENCE OF FOREIGN INTERNSHIP AMONG RUSSIAN STUDENTS’ OF CIVIL ENGINEERING DEPARTMENT OF IZHSTU AT BRNO UNIVERSITY OF TECHNOLOGY (2013

    Directory of Open Access Journals (Sweden)

    Valery P. Grahov

    2015-03-01

    Full Text Available The aim of the study is to investigate the possibilities of foreign internships among Russian students. Methods. The methods involve general-scientific methods of theoretical research – analysis and synthesis. Results. The article is devoted to the analysis of foreign internships of Civil Engineering Department of Kalashnikov Izhevsk State Technical University in foreign universities for a specific period of time. The authors analyze the entry of Russian students into the European educational process. Additionally, the authors describe the educational process of training among Russian students of the Industrial and Civil Construction Department in Brno University of Technology. The training is conducted in accordance with the project of the European Union «Lifelong Learning Programme», which involves some non-profitable projects of foreign exchange of students and teachers; e.g. Erasmus Mundus, that is accessible more or less for all universities all over the world. A brief assessment of teaching subjects in the Czech University is given. The concept of students’ foreign internships as a part of preparation of intended graduates with a degree in «Construction» is extended. Evident, current and future advantages and benefits of such foreign internship projects are noted. Scientific novelty and practical significance. The research findings include the developed recommendations for students’ internship organization in foreign universities. 

  6. Engineering students at typically invisible transition points: A focus on admissions and the sophomore year

    Science.gov (United States)

    Holloway, Elizabeth M.

    similarity than differences, although the differences indicated that engineering sophomores were less engaged in their learning and less engaged with faculty and advisors. Sophomore engineering women were much more likely than men to be involved in engineering peer mentoring or leadership programs. Multiple regression analysis indicated that the most significant predictor of student satisfaction was satisfaction with peers on campus. The most significant predictor of intention to persist and intention to graduate was surety of major choice. However, there were differences in the most significant predictors when looking at men and women separately. Predictors of success outcomes for engineering sophomores point to the interconnectedness of experiences with faculty, advisors, and peers with individual student traits, characteristics, and preferences, with individual aspects acting as mediating and moderating factors. The overarching results of this research project offer frameworks through which change in the engineering education process can lead to greater participation by women in the engineering field, and increased retention rates for all engineering students.

  7. Modeling In-Use Steel Stock in China’s Buildings and Civil Engineering Infrastructure Using Time-Series of DMSP/OLS Nighttime Lights

    Directory of Open Access Journals (Sweden)

    Hanwei Liang

    2014-05-01

    Full Text Available China’s rapid urbanization has led to increasing steel consumption for buildings and civil engineering infrastructure. The in-use steel stock in the same is considered to be closely related to social welfare and urban metabolism. Traditional approaches for determining the in-use steel stock are labor-intensive and time-consuming processes and always hindered by the availability of statistical data. To address this issue, this study proposed the use of long-term nighttime lights as a proxy to effectively estimate in-use steel stock for buildings (IUSSB and civil engineering infrastructure (IUSSCE at the provincial level in China. Significant relationships between nighttime lights versus IUSSB and IUSSCE were observed for provincial variables in a single year, as well as for time series variables of a single province. However, these relationships were found to differ among provinces (referred to as “inter-individual differences” and with time (referred to as “temporal differences”. Panel regression models were therefore proposed to estimate IUSSB and IUSSCE in consideration of the temporal and inter-individual differences based on a dataset covering 1992–2007. These models were validated using data for 2008, and the results showed good estimation for both IUSSB and IUSSCE. The proposed approach can be used to easily monitor the dynamic of IUSSB and IUSSCE in China. This should be critical in providing valuable information for policy making regarding regional development of buildings and infrastructure, sustainable urban resource management, and cross-boundary material recycling.

  8. Civilizing Processes

    OpenAIRE

    Dolan, Paddy

    2011-01-01

    The theory of “civilizing processes” was developed by Norbert Elias in the 1930s to describe and explain the generation of higher standards of various forms of conduct in the context of unplanned but structured changes in state formation and lengthening chains of social interdependencies (Elias 2000). The idea of civilized conduct may seem a strange companion to popular understandings of consumer culture, when the latter phrase is often associated with hedonism, individualism and excess. But ...

  9. 土工合成材料在土木工程领域的研究及应用%Application and Study of Geosynthetics to the Civil Engineering Field

    Institute of Scientific and Technical Information of China (English)

    陈晓旭; 唐小方; 何华拓; 郭冰

    2015-01-01

    Thebriefly introduction of the category of geosyn-thetics, summarize the application and research of Geosynthetics in the civil engineering field, such as road engineering, geotechnical engineering, structural engineering and so on.%简要介绍了土工合成材料的分类,并总结了土工合成材料在道路工程、岩土工程、结构工程等土木工程领域的研究与应用情况。

  10. Research on the Focal Point and Feature Risk Judgment of Safety Evaluative in Civil Explosive Industry%民爆安评重点与特征风险评判研究

    Institute of Scientific and Technical Information of China (English)

    王艳平

    2014-01-01

    本文结合民爆行业重特大生产安全事故教训和开展安全评价工作的实际,系统分析了当前民爆安全评价存在的问题与不足,研究了当前民爆安全评价应加强的重点内容,并从强化民爆生产线安全风险管控的角度,探讨了民爆安全评价过程中亟需突出的特征风险评判要点。%According to the lessons from the safety production accidents and the actuality of safety evaluation in civil explosive industry, the problems and disadvantages of civil explosive safety assessment were analyzed, and the things safety evaluation should focus on were researched. Aim to improving the security risk control of production line in civil explosive industry, the key point of feature risk judgment urgent needed during the safety evaluation in civil explosive industry were discussed.

  11. Environmental guidelines for reuse of ash in civil engineering applications - including criteria for Sb and As; Miljoeriktlinjer foer askanvaendning i anlaeggningsbyggande - inklusive haltkriterier foer Sb och As

    Energy Technology Data Exchange (ETDEWEB)

    Bendz, David; Wik, Ola (Swedish Geotechnical Inst., Linkoeping (Sweden)); Jones, Celia; Pettersson, Michael; Elert, Mark (Kemakta, Stockholm (Sweden))

    2009-07-15

    Swedish producers, authorities and users have acknowledged the need for common environmental guidelines for residues. The objective of this project has been to develop a proposal for common environmental guidelines for reuse of ash in civil engineering applications. The project has a narrow risk assessment with application on an strictly nearfield, local perspective and focus on a limited set of substances. Health aspects for construction workers are not covered in the project. The starting point in the risk assessment is the assumption that ashes may be used just like any conventional construction material. Special requirements or regulations regarding precautionary actions in the handling of ashes, regarding the site or surroundings will be avoided. The guiding principle has been the precautionary principle: reuse of ash is acceptable only if it constitute an insignificant risk to health and environment. The calculations are based on defined emission- and exposure scenarios. The concept of insignificant risk imply that the impact in the defined points of compliance does not exceed established health- and environmental criteria. The model address health risks associated with spreading of particles and exposure by dust, oral intake, dermal contact and intake by vegetables or wild grown berries and consumption of ground water. Off-site environmental effects in surface waters and in soil as well as health- and environmental risks in the post use phase are also considered. Exposure by dust is addressed in the same way as in the Swedish Environmental Protection Agency's guidelines for contaminated soil [12]. The guidelines values for exposure by dust, oral intake, dermal contact and intake by vegetables or wild grown berrys are total content, whereas the guidelines for exposure by consumption of ground water or environmental effects in surface waters are based on leaching properties of the ash. The guidelines rely on a conceptual model, defined emissions and

  12. Analysis on Construction Technologies of Concrete Structure in Civil Engineering Buildings%土木工程建筑中混凝土结构的施工技术分析

    Institute of Scientific and Technical Information of China (English)

    段富振

    2015-01-01

    随着我国社会和经济的不断发展,土木工程建筑业也得到了飞速的发展与进步,土木工程建筑施工中最常采用的材料就是混凝土,为了保证土木工程施工质量,在对土木工程混凝土结构进行施工时对混凝土所具有的性能有了更高的要求.本文针对工程施工中混凝土产生裂缝的原因,对土木工程建筑混凝土结构的相关施工技术进行分析探究,提出笔者的思考和建议,仅供参考.%With the continuous development of society and economy in our country, civil engineering construction indus?try has also achievedrapid development and progress, and the material that is most commonly used in civil engineering construction is concrete, in order to ensure the quality of civil engineering construction, in the construction of concretes?tructure in civil engineering, there arehigher requirementson the performance of concrete. According to the cause of con?crete cracks in the construction, the construction technologies related to civil engineering construction concrete struc?tureareanalyzedandinvestigated, and the author's thinking and suggestions are put forward for your reference.

  13. Research onthe Construction of Campus-based Innovative Practice Base for Civil Engineering Majors---Taking Civil Engineering Majors of Beijing City University as an Example%城建类专业校内创新实践基地建设初探--以北京城市学院城建类专业为例

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    城建类专业学生的创新精神和实践能力必须通过一系列高质量的实践性教育教学环节的训练,才能够得到有效的培养。本文以北京城市学院城建类校内创新实践基地建设为例,阐述了基地“三平台”功能定位,从基地的组织管理、基地资源的配置完善、“三平台”的建设成效等方面,对基地建设情况进行了分析总结。%Only by taking part in a series of practice can the civil engineering majors’innovative spirit and practical ability be effectively trained.Taking the construction of campus-based innovative practice base for civil engineering majors of Beijing City University as an example,this paper describes “three platforms”function of innovative practice base and analyzes the base construction situation through the organization management of innovative practice base,the improvement of resources allocation and the construction of“three platforms”.

  14. Impurity diffusion, point defect engineering, and surface/interface passivation in germanium

    KAUST Repository

    Chroneos, Alexander I.

    2012-01-26

    In recent years germanium has been emerging as a mainstream material that could have important applications in the microelectronics industry. The principle aim of this study is to review investigations of the diffusion of technologically important p- and n-type dopants as well as surface and interface passivation issues in germanium. The diffusion of impurities in germanium is interrelated to the formation of clusters whenever possible, and possibilities for point defect engineering are discussed in view of recent results. The importance of electrically active defects on the Ge surface and interfaces is addressed considering strategies to suppress them and to passivate the surfaces/interfaces, bearing in mind their importance for advanced devices. © 2012 by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Sustainability, Eco-Point and Engineering Performance of Different Workability OPC Fly-Ash Mortar Mixes

    Directory of Open Access Journals (Sweden)

    Putri Zulaiha Razi

    2016-05-01

    Full Text Available This study investigates the engineering performance and CO2 footprint of mortar mixers by replacing Portland cement with 10%, 20%, 40% and 60% fly ash, a common industrial waste material. Samples of self-compacting mortar (SCM were prepared with four different water/binder ratios and varying dosages of superplasticizer to give three ranges of workability, i.e., normal, high and self-compacting mortar mix. The engineering performance was assessed in term of compressive strength after designated curing periods for all mixes. CO2 footprint was the environmental impact indicator of each production stage. The optimum mix obtained was at 10% replacement rate for all mixes. Total production emission reduced by 56% when the fly ash replacement rate increased from 0% to 60% (maximum. This is translated to a reduction of 80% in eco-points (assuming that the energy consumption rate of production with 0% fly ash is at 100%. Such re-utilization is encouraged since it is able to reduce possible soil toxicity due to sulfur leaching by 5% to 27% and landfill area by 15% to 91% on average.

  16. Design and testing of Ground Penetrating Radar equipment dedicated for civil engineering applications: ongoing activities in Working Group 1 of COST Action TU1208

    Science.gov (United States)

    Pajewski, Lara; Manacorda, Guido; Persico, Raffaele

    2015-04-01

    This work aims at presenting the ongoing research activities carried out in Working Group 1 'Novel GPR instrumentation' of the COST (European COoperation in Science and Technology) Action TU1208 'Civil Engineering Applications of Ground Penetrating Radar' (www.GPRadar.eu). The principal goal of the COST Action TU1208 is to exchange and increase scientific-technical knowledge and experience of GPR techniques in civil engineering, simultaneously promoting throughout Europe the effective use of this safe and non-destructive technique in the monitoring of infrastructures and structures. Working Group 1 (WG1) of the Action focuses on the development of innovative GPR equipment dedicated for civil engineering applications. It includes three Projects. Project 1.1 is focused on the 'Design, realisation and optimisation of innovative GPR equipment for the monitoring of critical transport infrastructures and buildings, and for the sensing of underground utilities and voids.' Project 1.2 is concerned with the 'Development and definition of advanced testing, calibration and stability procedures and protocols, for GPR equipment.' Project 1.3 deals with the 'Design, modelling and optimisation of GPR antennas.' During the first year of the Action, WG1 Members coordinated between themselves to address the state of the art and open problems in the scientific fields identified by the above-mentioned Projects [1, 2]. In carrying our this work, the WG1 strongly benefited from the participation of IDS Ingegneria dei Sistemi, one of the biggest GPR manufacturers, as well as from the contribution of external experts as David J. Daniels and Erica Utsi, sharing with the Action Members their wide experience on GPR technology and methodology (First General Meeting, July 2013). The synergy with WG2 and WG4 of the Action was useful for a deep understanding of the problems, merits and limits of available GPR equipment, as well as to discuss how to quantify the reliability of GPR results. An

  17. Multi-point laser spark generation for internal combustion engines using a spatial light modulator

    Science.gov (United States)

    Lyon, Elliott; Kuang, Zheng; Cheng, Hua; Page, Vincent; Shenton, Tom; Dearden, Geoff

    2014-11-01

    This paper reports on a technique demonstrating for the first time successful multi-point laser-induced spark generation, which is variable in three dimensions and derived from a single laser beam. Previous work on laser ignition of internal combustion engines found that simultaneously igniting in more than one location resulted in more stable and faster combustion - a key potential advantage over conventional spark ignition. However, previous approaches could only generate secondary foci at fixed locations. The work reported here is an experimental technique for multi-point laser ignition, in which several sparks with arbitrary spatial location in three dimensions are created by variable diffraction of a pulsed single laser beam source and transmission through an optical plug. The diffractive multi-beam arrays and patterns are generated using a spatial light modulator on which computer generated holograms are displayed. A gratings and lenses algorithm is used to accurately modulate the phase of the input laser beam and create multi-beam output. The underpinning theory, experimental arrangement and results obtained are presented and discussed.

  18. Abstracts of the Canadian Society for Civil Engineering annual conference including the general conference, the 1. international structural specialty conference, the 1. international construction specialty conference, and the 1. specialty conference on disaster mitigation : towards a sustainable future

    International Nuclear Information System (INIS)

    This conference provided a forum for national and international practicing engineers, researchers and technical experts to discuss sustainable solutions to infrastructure development. Discussions focused on recent developments in new technologies for building more economic and sustainable infrastructure, while improving the safety of buildings, bridges, roads, water supply and sewage treatment systems. The conference was held in conjunction with associated specialty conferences, including a first international structures specialty conference, a first international construction specialty conference, and a first specialty conference on disaster mitigation. This book of abstracts highlights all the specialty conferences and accompanies a CD-ROM that has the full text of all the papers. Manuscripts of the full papers submitted to the specialty conferences were peer-reviewed by international scientific committees. The general conference provided a forum to learn about new technologies and future directions in various areas of civil engineering. It included a special theme session on sustainable development and a special session on innovation and information technology. Other technical sessions focused on topics such as civil engineering history and education; infrastructure management and renewal; asset management; risk assessment and management; engineering materials and mechanics; environmental engineering and science; hydrotechnical engineering; cold region engineering; and, transportation engineering. The general conference featured 88 presentations, of which 15 have been catalogued separately for inclusion in this database

  19. Civil Technology Applications. Teacher Edition [and] Student Edition.

    Science.gov (United States)

    Schertz, Karen

    Teacher and student editions of Civil Technology Applications are one in a series of competency-based instructional materials for drafting and civil technology programs. It includes the technical content and tasks necessary for a student to be employed as a drafter or civil technician in a civil engineering firm. Introductory pages in the teacher…

  20. Point 1 Updates

    CERN Multimedia

    Inigo-Golfin, J.

    The ATLAS experimental area is located in Point 1, just across the main CERN entrance, in the commune of Meyrin. There people are ever so busy to finish the different infrastructures for ATLAS. Not only has Civil Engineering finished the construction of the USA15 technical cavern, but the excavation of the main UX15 cavern has resumed below the machine tunnel, after a brief halt to allow the construction of the UJ-caverns for the power converters of the LHC machine. The excavation work should end in August 2002. The UX15 hand-over to ATLAS is expected in April 2003. On the surface civil engineering is starting to complete the last two surface buildings (SDX1 and SH1), once the services (cooling pipes, ventilation ducts and the largest item, the lift modules and its lift of course) in the shaft PX15 have been completed. But the civil engineering is not all. A lot more is under way. The site installation of the steel structures in the caverns is to begin in Autumn, along with all the cooling pipes, airconditi...

  1. The capacity limitations of power transmission cable lines in the structure of civil and industry engineering networks

    Directory of Open Access Journals (Sweden)

    V.V. Titkov

    2014-10-01

    Full Text Available The present study analyses heat modes of high voltage cable lines typical for laying in the area of communications, different obstacles and engineering networks, such as, for instance, hot water supply lines. It is well-known that the load capacity of modern high voltage cable lines with a plastic insulation is limited by the maximum permissible heating temperature of 90 °C. This study focuses on two typical cases of heating mains influence on heat exchange of a power cable line with surrounding ground: 1 the rapprochement of a power cable line with a heating main – the segment of a parallel disposal of a cable line and a heating pipe; 2 the intersection of a cable line and a heating main – the area where the cable line going above the heating main crosses it at the angle of 90 degrees. We have proposed the model of a prolonged cylinder with inhomogeneous thermophysical and heat exchange parameters distribution along this cable for the temperature distribution along a power cable in terms of non-regular laying. The finite-element method has been used to solve the problem of cable line heating fields near heating main calculation. A quantitative analysis of the cases described above has revealed that the local cable temperature excess up to several tenths of degrees is typical for them. It leads to the transmission capacity decrease by 20–30 % and limits the cable line ability to cover peak loads occurring in industrial, natural or other disasters. Besides, cable line segment spillover out of permissible temperature mode leads to emergency, power shortage and further repairing efforts. While engineering and calculations of the cable lines modes, our proposed techniques allow avoiding critical temperature conditions which may lead to the consequences described above.

  2. Multi-View Point Clouds Registration without Feature Extraction for Use in Reverse Engineering of CAD Models

    Institute of Scientific and Technical Information of China (English)

    Huang Xiaoping; Xiong Youlun

    2001-01-01

    For reverse engineering a CAD model, it is necessary to integrate measured points from several views of an object into a common reference frame. Given a rough initial alignment of point cloud in different views with point-normal method, further refinement is achieved by using an improved iterative closest point (ICP) algorithm. Compared with other methods used for multi-view registration, this approach is automatic because no geometric feature, such as line, plane or sphere needs to be extracted from the original point cloud manually. A good initial alignment can be acquired automatically and the registration accuracy and efficiency is proven better than the normal point-point ICP algorithm both experimentally and theoretically.

  3. Review of the seismic risk in the design of civil engineering of nuclear installations excepted the long term storage of radioactive wastes; Prise en compte du risque sismique a la conception des ouvrages de genie civil d'installations nucleaires de base a l'exception des stockages a long terme des dechets radioactifs

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    This guide aims to define, for the nuclear installations excepted the long term storage of radioactive wastes, from site data, the design specifications of earthquake resistant civil engineering and the possible methods for: the determination of the seismic response of the buildings, taking into account the interactions with the materials and the evaluation of the associated strains to size the installation; the determination of seismic displacements to be considered to size the materials. (A.L.B.)

  4. Curvature effect on the mechanical behaviour of a martensitic shape-memory-alloy wire for applications in civil engineering

    Science.gov (United States)

    Tran, Hanh; Balandraud, Xavier; Destrebecq, Jean-François

    2015-02-01

    The mechanical response of a bent shape memory alloy (SMA) wire is a key point for the understanding of the process of the creation of confining effects in a wrapped concrete cylinder for example. The objective of the present study is to model the phenomena involved in the bending of a martensitic SMA wire. The mechanism of martensite reorientation is considered in the model, which also takes into account the asymmetry between tension and compression. For validation purposes, experiments were performed on Ni-Ti wires: measurement of residual curvatures after bending release and tensile tests on pre-bent wires. In particular, the analysis shows a variation in axial stiffness as a function of the preliminary curvature. This result shows the necessity of modelling the distributions of the state variables within the wire cross-section for the simulation of confinement processes using SMA wires. It also opens prospects to potential application to the bending of SMA fibres in smart textiles.

  5. Curvature effect on the mechanical behaviour of a martensitic shape-memory-alloy wire for applications in civil engineering

    International Nuclear Information System (INIS)

    The mechanical response of a bent shape memory alloy (SMA) wire is a key point for the understanding of the process of the creation of confining effects in a wrapped concrete cylinder for example. The objective of the present study is to model the phenomena involved in the bending of a martensitic SMA wire. The mechanism of martensite reorientation is considered in the model, which also takes into account the asymmetry between tension and compression. For validation purposes, experiments were performed on Ni–Ti wires: measurement of residual curvatures after bending release and tensile tests on pre-bent wires. In particular, the analysis shows a variation in axial stiffness as a function of the preliminary curvature. This result shows the necessity of modelling the distributions of the state variables within the wire cross-section for the simulation of confinement processes using SMA wires. It also opens prospects to potential application to the bending of SMA fibres in smart textiles. (paper)

  6. Experimental Assessment of the Emissions Control Potential of a Rich/Quench/Lean Combustor for High Speed Civil Transport Aircraft Engines

    Science.gov (United States)

    Rosfjord, T. J.; Padget, F. C.; Tacina, Robert R. (Technical Monitor)

    2001-01-01

    In support of Pratt & Whitney efforts to define the Rich burn/Quick mix/Lean burn (RQL) combustor for the High Speed Civil Transport (HSCT) aircraft engine, UTRC conducted a flametube-scale study of the RQL concept. Extensive combustor testing was performed at the Supersonic Cruise (SSC) condition of a HSCT engine cycle, Data obtained from probe traverses near the exit of the mixing section confirmed that the mixing section was the critical component in controlling combustor emissions. Circular-hole configurations, which produced rapidly-, highly-penetrating jets, were most effective in limiting NOx. The spatial profiles of NOx and CO at the mixer exit were not directly interpretable using a simple flow model based on jet penetration, and a greater understanding of the flow and chemical processes in this section are required to optimize it. Neither the rich-combustor equivalence ratio nor its residence time was a direct contributor to the exit NOx. Based on this study, it was also concluded that (1) While NOx formation in both the mixing section and the lean combustor contribute to the overall emission, the NOx formation in the mixing section dominates. The gas composition exiting the rich combustor can be reasonably represented by the equilibrium composition corresponding to the rich combustor operating condition. Negligible NOx exits the rich combustor. (2) At the SSC condition, the oxidation processes occurring in the mixing section consume 99 percent of the CO exiting the rich combustor. Soot formed in the rich combustor is also highly oxidized, with combustor exit SAE Smoke Number emissions control at SSC also performed better at part-power conditions. Data from mixer exit traverses reflected the expected mixing behavior for off-design jet to crossflow momentum-flux ratios. (4) Low power operating conditions require that the RQL combustor operate as a lean-lean combustor to achieve low CO and high efficiency. (5) A RQL combustor can achieve the emissions goal

  7. A Data Filter for Identifying Steady-State Operating Points in Engine Flight Data for Condition Monitoring Applications

    Science.gov (United States)

    Simon, Donald L.; Litt, Jonathan S.

    2010-01-01

    This paper presents an algorithm that automatically identifies and extracts steady-state engine operating points from engine flight data. It calculates the mean and standard deviation of select parameters contained in the incoming flight data stream. If the standard deviation of the data falls below defined constraints, the engine is assumed to be at a steady-state operating point, and the mean measurement data at that point are archived for subsequent condition monitoring purposes. The fundamental design of the steady-state data filter is completely generic and applicable for any dynamic system. Additional domain-specific logic constraints are applied to reduce data outliers and variance within the collected steady-state data. The filter is designed for on-line real-time processing of streaming data as opposed to post-processing of the data in batch mode. Results of applying the steady-state data filter to recorded helicopter engine flight data are shown, demonstrating its utility for engine condition monitoring applications.

  8. 塑料模板在建筑工程中的应用研究%Study on the Application of Plastic Formwork in Civil Engineering

    Institute of Scientific and Technical Information of China (English)

    余少乐; 张其林; 陈海洲; 王国欣; 张晓勇

    2014-01-01

    塑料模板作为一种新型的绿色建筑模板,不仅可以进行多次建筑施工周转,加快工程进度,提高工程质量,降低劳动强度,减少投入,还具有质量小、耐腐蚀性好等优点,作为节能环保产品被广泛推广使用。针对目前国内外塑料模板的使用现状,对塑料模板的性能进行了力学研究,提出了可以改进的几种使用功能,这些功能拓宽了塑料模板在建筑工程中的应用。%As a green construction formwork, the plastic formwork can increase the turnover rate of formwork, speed up construction progress, improve construction quality, lower working strength and reduce input. Moreover, it has the advantages of light quality and good anti-corrosion property. It has been widely popularized and applied in our country as energy saving and environmental protection products . It is introduced in brief that the domestic and foreign employed situation of plastic formwork, and its mechanical performance was investigated and a number of ways in which the use function could be improved were suggested. These new functions would broaden the application of plastic formwork in civil engineering.

  9. 19 January 2011 - British University of Manchester, Vice-President and Dean for the Faculty of Engineering and Physical Sciences Professor of Structural Engineering School of Mechanical, Aerospace and Civil Engineering C. Bailey in CERN Control Centre with Department Head P. Collier; at LHCb with R. Lindner and ATLAS underground experimental area with Deputy Spokesperson D. Charlton, througout accompanied by . Collier with R. Appleby and F. Loebinger

    CERN Multimedia

    Maximilien Brice

    2011-01-01

    19 January 2011 - British University of Manchester, Vice-President and Dean for the Faculty of Engineering and Physical Sciences Professor of Structural Engineering School of Mechanical, Aerospace and Civil Engineering C. Bailey in CERN Control Centre with Department Head P. Collier; at LHCb with R. Lindner and ATLAS underground experimental area with Deputy Spokesperson D. Charlton, througout accompanied by . Collier with R. Appleby and F. Loebinger

  10. Laser-induced multi-point ignition for enabling high-performance engines

    KAUST Repository

    Chung, Suk-Ho

    2015-01-01

    Various multi-point laser-induced ignition techniques were reviewed, which adopted conical cavity and prechamber configurations. Up to five-point ignitions have been achieved with significant reduction in combustion duration, demonstrating potential increase in combustion system efficiency.

  11. Galactic-scale civilization

    Science.gov (United States)

    Kuiper, T. B. H.

    1980-01-01

    Evolutionary arguments are presented in favor of the existence of civilization on a galactic scale. Patterns of physical, chemical, biological, social and cultural evolution leading to increasing levels of complexity are pointed out and explained thermodynamically in terms of the maximization of free energy dissipation in the environment of the organized system. The possibility of the evolution of a global and then a galactic human civilization is considered, and probabilities that the galaxy is presently in its colonization state and that life could have evolved to its present state on earth are discussed. Fermi's paradox of the absence of extraterrestrials in light of the probability of their existence is noted, and a variety of possible explanations is indicated. Finally, it is argued that although mankind may be the first occurrence of intelligence in the galaxy, it is unjustified to presume that this is so.

  12. Civil liberties and nuclear terrorism

    International Nuclear Information System (INIS)

    The importance of preventing nuclear terrorism is so great that it is easy to believe that the usual concern with civil liberties must take a back seat. But it is precisely when emergencies are invoked that the authors must not forget the importance of freedoms. Emergency powers are easily abused, and, even in the absence of abuse, mistakes can be made. It is hard to understand why they care about civil liberties if every suspect is guilty, every wiretap is necessary, and every search is justified. But sometimes suspects are innocent, wiretaps are used for political ends, and searches disrupt lives to no end. Civil liberties do not exist in a vacuum. If society is destroyed, civil liberties are likely to be destroyed as well. Virtually every legal doctrine this study addresses involves a recognition that individual rights must be balanced against valid social needs. The civil liberties focus on here fall under the general headings of freedom of speech and association, privacy, due process rights for suspects, and freedom from unreasonable searches and seizures. One essential point applied to all these areas: although a counterterrorist activity is legal, that does not mean the activity has no impact on civil liberties. It may be legal, for example, to have a massive federal police force that provides hundreds of guards for every shipment of plutonium. Even so, that procedure still raises civil liberties concerns, since many Americans would feel less free in a society of that type

  13. Preliminary Comparison of Three Search Engines for Point of Care Access to MEDLINE® Citations

    Science.gov (United States)

    Hauser, Susan E.; Demner-Fushman, Dina; Ford, Glenn M.; Jacobs, Joshua L.; Thoma, George

    2006-01-01

    Medical resident physicians used MD on Tap in real time to search for MEDLINE citations relevant to clinical questions using three search engines: Essie, Entrez and Google™, in order of performance. PMID:17238564

  14. Preliminary comparison of three search engines for point of care access to MEDLINE citations.

    Science.gov (United States)

    Hauser, Susan E; Demner-Fushman, Dina; Ford, Glenn M; Jacobs, Joshua L; Thoma, George

    2006-01-01

    Medical resident physicians used MD on Tap in real time to search for MEDLINE citations relevant to clinical questions using three search engines: Essie, Entrez and Google, in order of performance. PMID:17238564

  15. Nanotechnology in civil infrastructure a paradigm shift

    CERN Document Server

    Gopalakrishnan, Kasthurirangan; Taylor, Peter; Attoh-Okine, Nii O

    2011-01-01

    Nanotechnology's rapid evolution is facilitating ever more previously unexplored areas of application. This book focuses on the latest advances in the development and characterization of nanotechnology-based civil engineering materials, structures and systems.

  16. Radio communications with extra-terrestrial civilizations

    Science.gov (United States)

    Kotelnikov, V. A.

    1974-01-01

    Communications between civilizations within our galaxy at the present level of radio engineering is possible, although civilizations must begin to search for each other to achieve this. If an extra-terrestrial civilization possessing a technology at our level wishes to make itself known and will transmit special radio signals to do this, then it can be picked up by us at a distance of several hundreds of light years using already existing radio telescopes and specially built radio receivers. If it wishes, this civilization can also send us information without awaiting our answer.

  17. Subsurface defect detection in first layer of pavement structure and reinforced civil engineering structure by FRP bonding using active infrared thermography

    Science.gov (United States)

    Dumoulin, Jean; Ibos, Laurent

    2010-05-01

    In many countries road network ages while road traffic and maintenance costs increase. Nowadays, thousand and thousand kilometers of roads are each year submitted to surface distress survey. They generally lean on pavement surface imaging measurement techniques, mainly in the visible spectrum, coupled with visual inspection or image processing detection of emergent distresses. Nevertheless, optimisation of maintenance works and costs requires an early detection of defects within the pavement structure when they still are hidden from surface. Accordingly, alternative measurement techniques for pavement monitoring are currently under investigation (seismic methods, step frequency radar). On the other hand, strengthening or retrofitting of reinforced concrete structures by externally bonded Fiber Reinforced Polymer (FRP) systems is now a commonly accepted and widespread technique. However, the use of bonding techniques always implies following rigorous installing procedures. To ensure the durability and long-term performance of the FRP reinforcements, conformance checking through an in situ auscultation of the bonded FRP systems is then highly suitable. The quality-control program should involve a set of adequate inspections and tests. Visual inspection and acoustic sounding (hammer tap) are commonly used to detect delaminations (disbonds) but are unable to provide sufficient information about the depth (in case of multilayered composite) and width of debonded areas. Consequently, rapid and efficient inspection methods are also required. Among the non destructive methods under study, active infrared thermography was investigated both for pavement and civil engineering structures through experiments in laboratory and numerical simulations, because of its ability to be also used on field. Pulse Thermography (PT), Pulse Phase Thermography (PPT) and Principal Component Thermography (PCT) approaches have been tested onto pavement samples and CFRP bonding on concrete

  18. The role of CERN in the large construction contracts for LHC civil works

    CERN Document Server

    D'Aça-Castel-Branco, P

    1998-01-01

    The contracts for the civil engineering construction of the LHC are based upon the standard FIDIC (Fédération Internationale des Ingénieurs Conseils) document entitled "Conditions of Contract for Works of Civil Engineering Construction". FIDIC is a reputable supra-national and world-wide Federation of Consulting Engineers focused on the definition and regulation of the role of many parties involved with the International Construction Industry. An overview of FIDIC's and other Organizations', such as the World Bank, standard documents is presented. The difference between standard Contract documents and standard Bidding documents is pointed out. In view of CERN's status as an intergovernmental Organization, the original FIDIC standard documents needed to be adapted. The modifications are identified and explained. A concise definition of the role of each party concerned by the LHC construction Contracts, i.e. the Contractor, the Engineer and the Client (CERN), is made. Finally, a brief cost-benefit analysis o...

  19. Analiza znanstvenih objav v Slovenskem gradbeništvu in geodeziji na primeru UL FGG ; Analysis of scientific publications in civil and geodetic engineering in Slovenia, in the case of the Faculty of civil and geodetic engineering in University of Ljubljana

    Directory of Open Access Journals (Sweden)

    Goran Turk

    2011-01-01

    Full Text Available Razvoj znanosti spremlja rast znanstvenih objav, predvsem v obliki člankov v recenziranih znanstvenih revijah. Analizirali smo znanstvene članke s področja gradbeništva in geodezije, ki so jih zaposleni na Fakulteti za gradbeništvo in geodezijo Univerze v Ljubljani objavili med letoma 2003 in 2008, njihovo citiranost, načine objavljanja in odprto dostopnost. Analizo smo opravili v informacijskih sistemih ISI/Web of Knowledge in Google Scholar. Želeli smo ugotoviti, kako obravnavana sistema pokrivata znanstveno produkcijo in njihovo odmevnost, torej število člankov in njihovo citiranost, ter podatke primerjati. Ugotovili smo, da so razlike med sistemoma glede na navedena elementa majhne ; The development of science is accompanied by the growth of scientific publications in the form of articles in peer-reviewed scientific journals. We analysed the scientific papers of the employees of the Faculty of Civil and Geodetic Engineering, University of Ljubljana, in the field of construction and geodesy for the period from 2003 to 2008, their citations, methods of publication and open access. The analysis was conducted in the ISI/Web of Knowledge and Google Scholar information systems. We wanted to determine how both information systems show the visibility of scientific production, specifically the number of articles and their citations, and make data comparisons. We have not found many significant differences in the information systems regarding these two elements.

  20. 32 CFR 644.329 - Army civil works real property.

    Science.gov (United States)

    2010-07-01

    ... civil works real property. (a) Fee-owned land and easements. (1) Action by Division/District Engineer (DE). When the DE is of the opinion that real property acquired in fee or easement for a civil works... 32 National Defense 4 2010-07-01 2010-07-01 true Army civil works real property. 644.329...

  1. Environmental criteria to incorporate into civil engineering studies and projects to improve environmental impact assessment proceeding; Criterios ambientales a incorporar en proyectos de ingenieria civil para favorecer el procedimiento de Evaluacion de Impacto Ambiental

    Energy Technology Data Exchange (ETDEWEB)

    Lazano Valero, I.; Palacios Garcia de la Rosa, D.; Doncel Moratilla, A.; Iglesias Perez, L.; Ortega Santos, L.; Varela Nieto, J. M.; Garcia Sanchez-Colomer, M.

    2009-07-01

    This study fulfils the need of establishing a guideline for environmental conditions that could be used to designing stages in projects submitted to Environmental Impact Assessment (EIA), in order to consider minimal requirements not only to encourage EIA proceedings but also to reduce Environmental Impact Statement (EIS) contents. EIS from the last 10 year for different civil works projects (roads, railways, airports, dams, hidroelectrical power stations, river channelizations, pipelines, water transfers, ports and works in the coast) have been studied, extracting all the environmental conditions found. Effectiveness and real implementation of theses conditions have been analysed in different phases of the project development, which have allowed a characterization of a series of environmental conditions that could improve environmental assessments and authorities decisions for EIS. (Author) 6 refs.

  2. Development education and engineering: a framework for incorporating reality of developing countries into engineering studies

    OpenAIRE

    Pérez Foguet, Agustí; Oliete-Josa, S; Saz-Carranza, A

    2005-01-01

    Purpose – To show the key points of a development education program for engineering studies fitted within the framework of the human development paradigm. Design/methodology/approach – The bases of the concept of technology for human development are presented, and the relationship with development education analysed. Special attention is dedicated to the role of case studies in engineering courses. After that, the development education program pushed by the Civil Engineering School of Bar...

  3. Application of Examples in Statistics Teaching for Civil Engineering Specialty in Higher Vocational Education%高职统计教学中结合专业案例培养学生应用能力的研究

    Institute of Scientific and Technical Information of China (English)

    文青

    2015-01-01

    本文通过实例讨论了统计中样本的数字特征、置信区间、回归分析在建筑类专业中的应用,以培养学生运用数学知识解决实际工程问题的能力,提高学生的学习兴趣。%This essay discusses samples’ digital characteristics ,confidence interval and re‐gression analysis in statistics ,and illustrates the application of statistics in civil engineering , with a view to training students’ problem‐solving ability by using mathematics .

  4. Sideloading - Ingestion of Large Point Clouds Into the Apache Spark Big Data Engine

    Science.gov (United States)

    Boehm, J.; Liu, K.; Alis, C.

    2016-06-01

    In the geospatial domain we have now reached the point where data volumes we handle have clearly grown beyond the capacity of most desktop computers. This is particularly true in the area of point cloud processing. It is therefore naturally lucrative to explore established big data frameworks for big geospatial data. The very first hurdle is the import of geospatial data into big data frameworks, commonly referred to as data ingestion. Geospatial data is typically encoded in specialised binary file formats, which are not naturally supported by the existing big data frameworks. Instead such file formats are supported by software libraries that are restricted to single CPU execution. We present an approach that allows the use of existing point cloud file format libraries on the Apache Spark big data framework. We demonstrate the ingestion of large volumes of point cloud data into a compute cluster. The approach uses a map function to distribute the data ingestion across the nodes of a cluster. We test the capabilities of the proposed method to load billions of points into a commodity hardware compute cluster and we discuss the implications on scalability and performance. The performance is benchmarked against an existing native Apache Spark data import implementation.

  5. Knowledge Engineering or Digital Humanities? Territorial Intelligence, a Case in Point

    OpenAIRE

    Rousseaux, Francis; Saurel, Pierre; Petit, Jean

    2014-01-01

    International audience Knowledge Engineering (KE) usually deals with representation and visualization challenges, sometimes socio or bio inspired, collective aspects being quite often taken into account. Nevertheless with knowledge-based Territorial Intelligence, KE is faced with natively situated know-how, distributed hope and network-centered emerging organizations, as far as this domain aims at providing tools to support and develop our local and territorial communities. Furthermore kno...

  6. The pros and cons of cryogenic accelerators: An engineering point of view

    International Nuclear Information System (INIS)

    The design of cryogenic linacs is a challenging engineering task; however, significant improvements in accelerator performance are possible. Resistive power losses may be reduced by a factor of four or greater. Greater flexibility is possible in thermal management as a result of substantial increases in thermal conductivity for certain materials. Radio frequency structures may by an order of magnitude more stable in terms of frequency shifts due to thermal transients resulting form very small coefficients of thermal expansion at cryogenic temperatures. Significant engineering problems must be addressed, such as the design of effective rf contacts that will not be affected by thermal cycling and the design of cryogenic mechanisms and dynamic components, such as frequency tuners, that operate reliably at cryogenic operating temperatures. The areas of high-power sparking and multipactoring have not yet been experimentally addressed. Both Los Alamos, Grumman Aerospace Corporation, and Boeing Corporation have built or are building and testing cryogenic accelerator structures. This paper reviews the advances made in cryogenic technology applied to radio frequency quadrupole (RFQ) and drift tube linac (DTL) structures and will discuss the advantages and engineering challenges that these linacs present

  7. Performance testing of 3D point cloud software

    Science.gov (United States)

    Varela-González, M.; González-Jorge, H.; Riveiro, B.; Arias, P.

    2013-10-01

    LiDAR systems are being used widely in recent years for many applications in the engineering field: civil engineering, cultural heritage, mining, industry and environmental engineering. One of the most important limitations of this technology is the large computational requirements involved in data processing, especially for large mobile LiDAR datasets. Several software solutions for data managing are available in the market, including open source suites, however, users often unknown methodologies to verify their performance properly. In this work a methodology for LiDAR software performance testing is presented and four different suites are studied: QT Modeler, VR Mesh, AutoCAD 3D Civil and the Point Cloud Library running in software developed at the University of Vigo (SITEGI). The software based on the Point Cloud Library shows better results in the loading time of the point clouds and CPU usage. However, it is not as strong as commercial suites in working set and commit size tests.

  8. History and Civility

    Science.gov (United States)

    Schaefer, Larry

    2015-01-01

    Larry Schaefer's history of civility is a succinct summary of the implicit and evolving definitions of civility over 2500 years of civilization. Beginning with the Romans and the root word "civitas," meaning the rights and duties of citizenship, civility appears in classical literature as integral to the roots of democracy in the context…

  9. ON THE PHENOMENON OF HYPOTHETIC FUNCTION-CIVILIZATIONS

    OpenAIRE

    Yazev, S.

    2006-01-01

    Extrapolation of tendencies of development of the terrestrial civilization into the field of nanotechnology and genetic engineering leads to a hypothesis of a principal possibility of creation of artificial civilizations with functions specified a priori. Existence of many artificial function-civilizations is assumed. Any spiritual values can be laid in their constructed genomes. When elaborating SETI programs it should be kept in mind that civilizations developing according to the programs o...

  10. Tracking Down Travel Agencies Geo-location using Software Engineering - Ml II Function Point Analysis

    Directory of Open Access Journals (Sweden)

    N.Kamaraj

    2014-03-01

    Full Text Available The location of individual travel agency around every corner by its respective database source in which the customers book their destination. The user details been fetched with their IP and Based on the latitude and longitude of the place that been point out in the map providers. It determines the origin of a packet on the Internet. GMAP is a tool for mapping. For the purpose of identifying the position and distance flat earth surface calculation concept is included, accurate flat-earth phase can be retrieved and the travel agency details could be gathered Function Point Analysis algorithm (FPA. To ensure customer safety and the Internet’s continuing growth, the presumption of anonymity is maintained. A simple way to track the identify whether it has any travel agency. A customized windows form in which the location based information could be search by using IP address of certain area and store the data.

  11. Assessment of nuclear risks in administrative court proceedings from an engineer's point of view

    International Nuclear Information System (INIS)

    Based on the experience gained in a multitude of nuclear energy proceedings before administrative courts, structures of and criteria for decision-making court concessing failure-preventing measures are discussed. The paper points out the significance of probabilistic methods in this context. To assess risks related to normal-operation emissions, e.g. natural radiation exposure, there exists a standard of comparison to be applied directly, which is approved by the Supreme Court. (DG)

  12. The Teaching Reform of Graduation Design in Civil Engineering Based on SWOT Analysis%基于SWOT分析的土木工程专业毕业设计教学改革

    Institute of Scientific and Technical Information of China (English)

    王新政; 王立峰; 田玉梅; 孙增林

    2011-01-01

    Based on the characteristics of adult education in civil engineering specialty,this paper analyzed "University-Enterprise Cooperation" and "Double-Qualification" modes of teaching reform in graduation design through SWOT methods.The analysis results show that theory and practice,education and demand will be combined closer through establishing University-Enterprise Cooperation cultivation mechanism and hiring "Double-Qualification" teachers,thus to truly play the huge function of graduation design teaching of adult education in civil engineering specialty.%本文结合土木工程专业成人教育的自身特点,对其毕业设计教学改革中的"校企联合"以及"双师型"两大教学模式进行了SWOT分析.分析结果表明,通过制定高校与企业的联合培养机制、聘请和培养"双师型"指导教师,能够使理论与实践、教育与需求的结合更紧密,从而真正发挥毕业设计教学环节在土木工程专业成人教育中的巨大作用.

  13. Engineering the Zero-Point Field and Polarizable Vacuum For Interstellar Flight

    CERN Document Server

    Puthoff, H E

    2010-01-01

    A theme that has come to the fore in advanced planning for long-range space exploration is the concept of "propellantless propulsion" or "field propulsion." One version of this concept involves the projected possibility that empty space itself (the quantum vacuum, or space-time metric) might be manipulated so as to provide energy/thrust for future space vehicles. Although such a proposal has a certain science-fiction quality about it, modern theory describes the vacuum as a polarizable medium that sustains energetic quantum fluctuations. Thus the possibility that matter/vacuum interactions might be engineered for space-flight applications is not a priori ruled out, although certain constraints need to be acknowledged. The structure and implications of such a far-reaching hypothesis are considered herein.

  14. Analisis Tingkat Relevansi E-Journal Pada Database American Society Of Civil Engineer ( Asce ) Dalam Memenuhi Kebutuhan Informasi Mahasiswa Magister Teknik Sipil Di Universitas Sumatera Utara

    OpenAIRE

    Laoli, Feriaman

    2010-01-01

    Database ASCE merupakan koleksi e-journal yang dilanggan oleh Perpustakaan Universitas Sumatera Utara ( USU ) untuk bidang ilmu teknik sipil. Koleksi ini diharapkan dapat menunjang proses belajar-mengajar dan bahan acuan dalam penelitian, pembuatan skripsi, tesis dan sebagainya bagi dosen, mahasiswa, karyawan di lingkungan universitas khususnya Universitas Sumatera Utara ( USU ). Penelitian ini bertujuan untuk mengetahui tingkat relevansi e-journal pada Database American Society of Civil E...

  15. Single-Point Mutation with a Rotamer Library Toolkit: Toward Protein Engineering.

    Science.gov (United States)

    Pottel, Joshua; Moitessier, Nicolas

    2015-12-28

    Protein engineers have long been hard at work to harness biocatalysts as a natural source of regio-, stereo-, and chemoselectivity in order to carry out chemistry (reactions and/or substrates) not previously achieved with these enzymes. The extreme labor demands and exponential number of mutation combinations have induced computational advances in this domain. The first step in our virtual approach is to predict the correct conformations upon mutation of residues (i.e., rebuilding side chains). For this purpose, we opted for a combination of molecular mechanics and statistical data. In this work, we have developed automated computational tools to extract protein structural information and created conformational libraries for each amino acid dependent on a variable number of parameters (e.g., resolution, flexibility, secondary structure). We have also developed the necessary tool to apply the mutation and optimize the conformation accordingly. For side-chain conformation prediction, we obtained overall average root-mean-square deviations (RMSDs) of 0.91 and 1.01 Å for the 18 flexible natural amino acids within two distinct sets of over 3000 and 1500 side-chain residues, respectively. The commonly used dihedral angle differences were also evaluated and performed worse than the state of the art. These two metrics are also compared. Furthermore, we generated a family-specific library for kinases that produced an average 2% lower RMSD upon side-chain reconstruction and a residue-specific library that yielded a 17% improvement. Ultimately, since our protein engineering outlook involves using our docking software, Fitted/Impacts, we applied our mutation protocol to a benchmarked data set for self- and cross-docking. Our side-chain reconstruction does not hinder our docking software, demonstrating differences in pose prediction accuracy of approximately 2% (RMSD cutoff metric) for a set of over 200 protein/ligand structures. Similarly, when docking to a set of over 100

  16. Nuclear power plants near consumers from a safety-engineering point of view

    International Nuclear Information System (INIS)

    Special safety requirements must be met by a nuclear power station near the consumer. These requirements may not be formulated in a purely probabilistic way because of the methodological deficiencies identified. The existing protection concept is rather extended so as to include the requirement of engineered safeguards in order to limit the damage in case of a worst reactor accident. The suggested individual dose limit together with the calculation rules should ensure that the consequences of a worst accident are essentially limited to the plant and that no emergency protection measures and countermeasures need to be considered either in the short term or in the longer term to prevent health damage. The resulting features of a reactor near the consumer aim at better inherent safety characteristics, which is shown to be possible by reasonable technical means and which seems to have already been realized to a large extent in plants of small and perhaps also medium power already conceived. The way of thinking behind this suggestion is applicable to other sectors of industrial technology. Furthermore, it might serve as a basis in the discussion about general advanced safety criteria, which has been stimulated due to 'Chernobyl'. (orig./HP)

  17. An engineering time-domain model for curve squeal: Tangential point-contact model and Green's functions approach

    Science.gov (United States)

    Zenzerovic, I.; Kropp, W.; Pieringer, A.

    2016-08-01

    Curve squeal is a strong tonal sound that may arise when a railway vehicle negotiates a tight curve. In contrast to frequency-domain models, time-domain models are able to capture the nonlinear and transient nature of curve squeal. However, these models are computationally expensive due to requirements for fine spatial and time discretization. In this paper, a computationally efficient engineering model for curve squeal in the time-domain is proposed. It is based on a steady-state point-contact model for the tangential wheel/rail contact and a Green's functions approach for wheel and rail dynamics. The squeal model also includes a simple model of sound radiation from the railway wheel from the literature. A validation of the tangential point-contact model against Kalker's transient variational contact model reveals that the point-contact model performs well within the squeal model up to at least 5 kHz. The proposed squeal model is applied to investigate the influence of lateral creepage, friction and wheel/rail contact position on squeal occurrence and amplitude. The study indicates a significant influence of the wheel/rail contact position on squeal frequencies and amplitudes. Friction and lateral creepage show an influence on squeal occurrence and amplitudes, but this is only secondary to the influence of the contact position.

  18. Challenges in PFBR civil construction

    International Nuclear Information System (INIS)

    Civil works of PFBR has posed numerous design and construction challenges. Eight safety related nuclear buildings of PFBR are founded on a single raft, first of its kind in Indian nuclear Reactors. Construction of eight interconnected buildings on the common raft has been challenge for construction material transportation. Thus Herculean task, require storage of massive quantities of raw materials and ice. The civil construction scope in PFBR expanded to critical steel fabricated structures integrated with civil works. This includes huge embedment erected to very close tolerances. Large size panels for upper lateral, lower lateral and bottom shields were to be fabricated to intricate contours with tight tolerances and were required to be transported to locations from far off distances; this was well accomplished without loss of tolerances of fabricated structures. Novel construction practices and stringent quality control procedures were implemented to accomplish this critical requirement. Integration of cooling coils inside the safety vessel flanges after completing the reactor vault and safety vessel erection, required special contour bending for numerous reinforcement and development of special construction methodology. The neutron detector box integration with bottom shield was also a construction challenge posed and well addressed by site. Many mock ups were to be carried out for demonstrating the construction procedures and methodology for critical construction activities. Maintaining the stringent requirements such as clean room conditions was a major challenge and was met effectively. Equipment erection in parallel to civil works too required innovative solutions for clean condition maintenance while civil works are in progress. it can be said that the civil construction of PFBR has emerged as a marvel of technology handled professionally by competent engineers deploying scientific construction techniques and stringent quality control procedures. (author)

  19. Civil Law Glossary.

    Science.gov (United States)

    Update on Law-Related Education, 1997

    1997-01-01

    Presents a glossary of civil law terms originally compiled for journalists by the American Bar Association. Defines many essential civil law concepts and practices including compensatory damages, jurisdiction, motion to dismiss, discovery, and remedy. (MJP)

  20. Active interaction control for civil structures

    OpenAIRE

    Wang, Luo-Jia

    1997-01-01

    This thesis presents a civil engineering approach to active control for civil structures. The proposed control technique, termed Active Interaction Control (AIC), utilizes dynamic interactions between different structures, or components of the same structure, to reduce the resonance response of the controlled or primary structure under earthquake excitations. The primary control objective of AIC is to minimize the maximum story drift of the primary structure. This is accomplished by timing th...

  1. Lao PDR - Civil Service Pay and Compensation Review : Attracting and Motivating Civil Servants

    OpenAIRE

    World Bank

    2010-01-01

    Lao PDR is at a point on its development trajectory where strategic attention to administrative performance is crucial. An efficient and high-performing civil service, with the compensation and human resource management systems to attract and motivate qualified personnel, will be essential to Lao PDR's development efforts. The ministerial-level Public Administration and Civil Service Autho...

  2. Det civile samfund

    DEFF Research Database (Denmark)

    Henriksen, Lars Skov

    2014-01-01

    Kapitlet giver en oversigt over de vigtigste teoretiske forståelser af begrebet om det civile samfund. Desuden giver kapitlet en empirisk oversigt over foreninger og organisationer i det danske civilsamfund samt befolkningens civile engagement.......Kapitlet giver en oversigt over de vigtigste teoretiske forståelser af begrebet om det civile samfund. Desuden giver kapitlet en empirisk oversigt over foreninger og organisationer i det danske civilsamfund samt befolkningens civile engagement....

  3. Application of Mixed-Language Programming of FORTRAN and C# in Calculating of Civil Engineering%利用混编技术对土木工程计算程序的改造

    Institute of Scientific and Technical Information of China (English)

    周涛; 汪金辉; 郭向荣

    2009-01-01

    Considering the characteristics of FORTRAN、C# language and OpenGL graphic library individually,this paper brings forward the concepts and methods of how to combining FORTRAN、C# and OpenGL together in reconstructing program when developing the interactive software of calculating of civil engineering.And this method is based on the technology of DLL (Dynamic Link Library).Through an example,in which the source code of FORTRAN was slightly transformed,this paper illustrates the process of the exploitation of the method.Examples prove this hybrid technology can greatly exert the advantages of all languages,and also make the classical source code of FORTRAN in existence refresh.In this way,not only the workload of the developing of the calculating program about civil engineering can be cut down,but also the efficiency of the Constructing the Software of civil engineering can be improved.%从FORTRAN、C#语言和OpenGL图形库各自的特点出发,提出了将三种技术通过动态链接库DLL(Dynamic Link Library)技术混合在一起,实现对传统土木工程计算程序的交互式界面化改造.并通过改造现有的GSAP(中南大学郭向荣教授开发的桥梁结构分析专用程序)计算程序FORTRAN源代码的实例阐述了这种开发方法的过程.实例证明,利用这种混合编程的技术可以充分发挥各种语言或标准的优势,使得现有的经典FORTRAN计算程序源码可以焕发出新的活力,既可以减轻土木工程计算程序的开发的工作量,又能够大大提高土木工程专业软件开发的效率.

  4. 10th Annual Schnabel Engineering Lecture

    OpenAIRE

    Wissmann, Kord J.

    2015-01-01

    Have you ever wondered why there aren't many start-up companies in our world of Civil Engineering? Dr. Wissmann explores this question and delves into the drivers, key ingredients, and fundamentals needed to run a successful Civil Engineering business. Geopier Foundation Company, Inc. Virginia Tech. Charles Edward Via, Jr. Department of Civil and Environmental Engineering Schnabel Engineering

  5. Internal architecture of the proto-Kern Canyon Fault at Engineer's Point, Lake Isabella Dam site, Kern County, California

    Science.gov (United States)

    Martindale, Z. S.; Andrews, G. D.; Brown, S. R.; Krugh, W. C.

    2014-12-01

    The core of the Cretaceous (?) proto-Kern Canyon Fault (KCF) is exposed continuously for 1.25 km along Engineer's Point at Lake Isabella, Kern County, California. The proto-KCF is notable for (1) its long and complex history within, and perhaps preceding the Sierra Nevada batholith, and (2) hosting the Quaternary Kern Canyon Fault, an active fault that threatens the integrity of the Lake Isabella auxiliary dam and surrounding communities. We are investigating the internal architecture of the proto-KCF to explore its control on the likely behavior of the modern KCF. The proto-KCF is developed in the Alta Sierra biotite-granodiorite pluton. A traverse across Engineer's Point, perpendicular to the proto-KCF trace, reveals gradational increases in fracture density, fracture length, bulk alteration, and decreases in fracture spacing and grain size toward the fault core. Mapping of the fault core reveals two prominent and laterally extensive zones: (1) continuous foliated blastomylonitic granodiorite with steeply-dipping, anastomosing shear bands and minor mylonite planes, and (2) foliated orange and green fault breccia with intergranular gouge, strong C/S fabric, and a central gouge plane. The fault breccia zone is intruded by a lensoidal, post-deformation dacite dike, probably ca. 105 - 102 Ma (Nadin & Saleeby, 2008) and is weakly overprinted by a set of cross-cutting spaced, short, brittle fractures, often coated in calcite, which we infer to be genetically related to the modern KCF. We present our structural and lithological data that will be supported by mineralogical and geochemical analyses. E. Nadin & J. Saleeby (2008) Disruption of regional primary structure of the Sierra Nevada batholith by the Kern Canyon fault system, California: Geological Society of America Special Paper 438, p. 429-454.

  6. ACCESS TO LEP POINT 5, CESSY (FRANCE)

    CERN Multimedia

    1999-01-01

    At the public environmental impact enquiry for the LHC project, the municipal authorities at Cessy suggested creating a new approach road to the civil engineering site (Point5) to ensure that materials deliveries by road are kept well away from housing along the Route de la Plaine.Following this recommendation, a track called the Chemin du Milieu has been upgraded into a road, and has been made available for the sole use of construction firms involved in building work at Point 5.The 'Dragados-Seli' consortium will be in charge of site surveillance for the new approach road.With effect from 29 March 1999, the present entrance will be closed to civil engineering firms and reserved for LEP installations maintenance services under the SL Division site managers, Mr. R. Spigato (tel. 160374) and P. Rey (tel. 160375).For obvious security reasons, those needing to use Point 5 are requested to keep the gate locked, even while they are on site, so as to prevent unauthorised persons from gaining access to the civil engi...

  7. The rivers of civilization

    Science.gov (United States)

    Macklin, Mark G.; Lewin, John

    2015-04-01

    The hydromorphic regimes that underpinned Old World river-based civilizations are reviewed in light of recent research. Notable Holocene climatic changes varied from region to region, whilst the dynamics of floodplain environments were equally diverse, with river channel changes significantly affecting human settlement. There were longer-term trends in Holocene hydroclimate and multi-centennial length 'flood-rich' and 'flood-poor' episodes. These impacted on five identified flooding and settlement scenarios: (i) alluvial fans and aprons; (ii) laterally mobile rivers; (iii) rivers with well-developed levees and flood basins; (iv) river systems characterised by avulsions and floodouts; and (v) large river-fed wetlands. This gave a range of changes that were either more or less regular or incremental from year-to-year (and thus potentially manageable) or catastrophic. The latter might be sudden during a flood event or a few seasons (acute), or over longer periods extending over many decades or even centuries (chronic). The geomorphic and environmental impacts of these events on riparian societies were very often irreversible. Contrasts are made between allogenic and autogenic mechanism for imposing environmental stress on riverine communities and a distinction is made between channel avulsion and contraction responses. Floods, droughts and river channel changes can precondition as well as trigger environmental crises and societal collapse. The Nile system currently offers the best set of independently dated Holocene fluvial and archaeological records, and the contrasted effects of changing hydromorphological regimes on floodwater farming are examined. The persistence of civilizations depended essentially on the societies that maintained them, but they were also understandably resilient in some environments (Pharaonic Egypt in the Egyptian Nile), appear to have had more limited windows of opportunity in others (the Kerma Kingdom in the Nubian Nile), or required

  8. Reforma studija geodezije na Odsjeku za geodeziju Građevinskog fakulteta Univerziteta u Sarajevu : Reform of the study of geodesy at the Department of geodesy of Faculty of Civil Engineering, University of Sarajevo

    Directory of Open Access Journals (Sweden)

    Džanina Omićević

    2011-12-01

    Full Text Available U ovom radu prikazane su aktivnosti i ciljevi vezani uz implementaciju Bolonjskog procesa na Odsjeku za geodeziju Građevinskog fakulteta Univerziteta u Sarajevu. Prvi puta su predstavljeni novi programi studija geodezije organizovana u tri ciklusa: dodiplomski, diplomski i doktorski studij. Cilj je da sažeto iznesemo osnovne informacije o reformskom procesu, koji je u toku, a koji bi trebalo da dugoročno promijeni evropski visokoškolski sistem. : This paper presents activities and goals related with the implementation of the Bologna process at the Department of Geodesy of Civil Engineering, University of Sarajevo. For the first time, new curricula study of geodesy which are organized into three cycles: bachelor, master and postgraduete doctoral study are presented. The goal of this paper is to present basic informacion about ongoing reform proces, and that should change the long-term European university system.

  9. Research on application of the 3D technology and 3D model in English for civil engineering%3D技术与三维建模在建筑类ECE教学实践中的应用

    Institute of Scientific and Technical Information of China (English)

    罗雨

    2014-01-01

    目前,最新信息技术的3D技术与三维建模已应用在课堂与实践辅助教学中.文章探讨了最新的信息技术与现有教学资源的选择、整合途径与原则,并以建筑英语课程教学与实践(English for Civil Engineer,ECE)为例,探索基于3D技术与三维建模的新教学模式.研究发现,新教学模式在有效教学、知识体系建构、技能与语言迁移、创新思维培养等方面有显著成效.

  10. Development and Application of Chemical Fibers in Building & Civil Engineering%建筑与土木工程用纤维材料的开发与应用

    Institute of Scientific and Technical Information of China (English)

    芦长椿

    2013-01-01

      本文简要介绍了建筑与土木工程中使用的化学纤维的技术特征,并从纤维品质,以及特种PVA纤维、碳纤维和碳纳米纤维在高端水泥混凝土制品中的应用等方面探讨了拓展技术纺织品市场的新途径。%  Technical characteristics of chemical fibers used in building&civil engineering were introduced in this article. Based on introducing the application of special PVA fiber, carbon fiber and carbon nanofiber to high-end cement concrete components, the author showed how to explore new market for technical textiles.

  11. Multi-point laser spark generation for internal combustion engines using a spatial light modulator

    International Nuclear Information System (INIS)

    This paper reports on a technique demonstrating for the first time successful multi-point laser-induced spark generation, which is variable in three dimensions and derived from a single laser beam. Previous work on laser ignition of internal combustion engines found that simultaneously igniting in more than one location resulted in more stable and faster combustion – a key potential advantage over conventional spark ignition. However, previous approaches could only generate secondary foci at fixed locations. The work reported here is an experimental technique for multi-point laser ignition, in which several sparks with arbitrary spatial location in three dimensions are created by variable diffraction of a pulsed single laser beam source and transmission through an optical plug. The diffractive multi-beam arrays and patterns are generated using a spatial light modulator on which computer generated holograms are displayed. A gratings and lenses algorithm is used to accurately modulate the phase of the input laser beam and create multi-beam output. The underpinning theory, experimental arrangement and results obtained are presented and discussed. (paper)

  12. Study and installation of concrete shielding in the civil engineering of nuclear construction (1960); Etude et mise en place des betons de protection dans le genie civil des ouvrages nucleaires (1960)

    Energy Technology Data Exchange (ETDEWEB)

    Dubois, F. [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    The object of this report is to give technical information about high density concretes which have become very important for radiation biological shielding. The most generally used heavy aggregates (barytes, ilmenite, ferrophosphorus, limonite, magnetite and iron punching) to make these concretes are investigated from the point of view prospecting and physical and chemical characteristics. At first, a general survey of shielding concretes is made involving the study of components, mixing and placing methods, then, a detailed investigation of some high density concretes: barytes concrete, with incorporation of iron punching or iron shot, ferrophosphorus concrete, ilmenite concrete and magnetite concrete, more particularly with regard to grading and mix proportions and testing process. To put this survey in concrete form, two practical designs are described such as they have been carried out at the Saclay Nuclear Station. Specifications are given for diverse concretes and for making the proton-synchrotron 'Saturne' shielding blocks. (author) [French] Ce rapport a pour objet de donner des precisions techniques au sujet des betons a haute densite qui ont pris une grande importance pour la protection biologique contre les rayonnements. Les agregats lourds les plus couramment utilises (barytine, ilmenite, ferrophosphore, limonite, magnetite et riblons) pour la fabrication de ces betons, sont examines du point de vue prospection et caracteristiques physiques et chimiques. On procede d'abord a une etude generale des betons de protection comprenant l'etude des constituants, de la confection et de la mise en place, ensuite, a un examen detaille de quelques betons a haute densite: betons a base de barytine, avec incorporation de riblons ou de grenaille de fonte, betons au ferrophosphore, a base d'ilmenite ou de magnetite, notamment en ce qui concerne la granulometrie, la composition, le dosage et les processus d'essais. Pour concretiser ces

  13. Active Center of Islamic Dialogue Civilizations

    Directory of Open Access Journals (Sweden)

    Ebrahim Moghimi

    2005-01-01

    Full Text Available It is obvious that an essay have introduced about Dialogue Civilizations, at first must be start with a definition about it. Obviously, this simple definition is almost difficult. Defining of Dialogue Civilizations is complex and difficult as far as it need to a vast range of definitions. In this essay will argue that how ever definition of Dialogue Civilization is different, can only seek as specific of intemporall and special situations that are in real-life. As well as this essay emphasize to practice of environmental (realm in Islamic countries. The philosophy of this essay is that, what is the share of Islamic environments with regard to looking at Civilizations special phenomena. The first attitude is that Islamic civilization includes different spaces around the globe. The second attitude is that Islamic Civilization includes developing of other Civilizations realm. The third is that in the realm of Islamic Civilization live different human life and this is an important starting point for Cultural Dialogue in the Islamic countries together. The fourth is that, there are expanding (space, population, political systems, organs and economic is different, that we will describe them in this essay.

  14. The Director-General visits the ATLAS construction site at Point 1

    CERN Multimedia

    Patrice Loiez

    1998-01-01

    Photo 05 : Claude Guitton (left), Project Manager for the EDF/Knight Piesold joint venture responsible for design and site supervision for LHC civil engineering at Point 1 takes the Director-General Chris Llewellyn Smith and LHC Project Leader Lyn Evans on a tour of the site.

  15. Calage thermodynamique du point mort haut des moteurs à piston Thermodynamic Calibration of Top Dead Center in Piston Engines

    Directory of Open Access Journals (Sweden)

    Pinchon P.

    2006-11-01

    Full Text Available Lorsqu'on utilise un système d'acquisition rapide de données sur moteur, il se pose souvent le problème d'associer des grandeurs calculées, comme le volume de la chambre de combustion, à des grandeurs mesurées comme la pression dans le cylindre. II est alors indispensable de synchroniser avec une grande précision absolue ces deux grandeurs en repérant avec soin au moins un point de référence de la cinématique bielle-manivelle. Dans la méthode développée ici on a choisi de déterminer la position angulaire du vilebrequin correspondant au Point Mort Haut (PMH grâce à l'exploitation du signal de pression-cylindre acquis en compression-détente sans combustion, le moteur étant entraîné en rotation. Le principe du calage consiste à calculer l'écart existant entre le PMH et l'angle de la pression maximale qui est aisément repérable. Basée sur des considérations thermodynamiques théoriques, cette méthode de calage a été testée avec succès au cours d'essais effectués sur divers moteurs dont on a fait varier en particulier le rapport volumétrique, le remplissage et les pertes à la segmentation. La précision de la méthode est de l'ordre de 1/10e de degré de rotation vilebrequin. When a fast data-acquisition system is used for an engine, the problem often arises of associating both calculated data, such as combustion chamber volume, and measured data, such as pressure inside the cylinder. It then becomes indispensable to synchronize these two data with great absolute accuracy by carefully determining at least a reference point in the kinematics of the connecting-rod/crank shaft assembly. In the method developed here, we have chosen to determine the angular position of the crankshaft corresponding to top dead center (TDC by making use of the cylinder-pressure signal recorded during compression/expansion without combustion for motored engine. The calibration principle consists in calculating the shift between TDC and the

  16. Nucleo electric conversion; an approximation from physics engineering

    International Nuclear Information System (INIS)

    The main purpose of this article is carry out some aspects of Civil use in produced Energy conversion from nuclear fi sion in electric energy from one point of view of physical engineering,emphasizing in nuclear power reactors and their fuel oil.

  17. Challenges in PFBR civil construction

    International Nuclear Information System (INIS)

    Civil works of PFBR has posed numerous design and construction challenges. Eight safety related nuclear buildings of PFBR are founded on a single raft, first of its kind in Indian nuclear Reactors. Construction of eight interconnected buildings on the common raft has been challenge for construction material transportation. The construction of Nuclear Island Connected Buildings (NICB) raft was completed in three and a half months. This massive 100mx100m raft for NICB, requiring 35000 cubic meter of concrete was undertaken in twelve pours. This Herculean task required storage of massive quantities of raw materials and ice. The construction of Turbo Generator (TG) building including TG mat and deck and interconnection with NICB posed enormous construction challenges that were well planned and executed. The intake and outfall structures too are exemplary construction handled effectively at PFBR. The excavation for the nuclear and power islands was large and deep. Rock out crops were found starting at various depths of excavation, requiring extensive planning controlled blasting and mechanization in excavation. This also required innovative dewatering procedures in sandy terrain often mixed with clay. Ground water table at PFBR site being high, water proofing for massive underground structure of PFBR was required to be carefully engineered and handled. This started with innovative grouting of excavated strata below the raft till required permeability was met and bone dry condition was achieved for laying of waterproofing membranes. Concurrent construction and regulatory reviews and stage wise clearance for civil construction required dynamic construction planning and sequencing. The scope of civil construction in PFBR expands to critical steel fabricated structures integrated with civil works. This includes huge embedment erected to very close tolerances. Large size panels for upper lateral, lower lateral and bottom shields were fabricated to intricate contours with

  18. Civil Society and Governance

    DEFF Research Database (Denmark)

    Hulgård, Lars

    An illustration of how important the relationship is between civil society anbd governance. A short historic journey with four snapshots of times and situations that have provided interesting evidence about the connection between civil society and governance. My goal for the short historic journey...... is to make clear and hopefully even verify that providing knowledge about the impact of civil society and citizens’ participation on governance is one of the most urgent research tasks in the current period of time....

  19. Civil Action Exercise Conditions

    OpenAIRE

    Bojinca, Moise

    2010-01-01

    The specialized literature defines civil action as being: “the legal means used by a person in order to ask the court to recognize its right or to fulfil this right, by ending the obstacles put by another person or through an adequate compensation Irrespective of its definition method, civil action is considered a central institution around which the entire activity of the court of law and of the parties gravitates. Next, we will discuss the requirements for exercising civil action: expressio...

  20. Civil Society and Accountability

    OpenAIRE

    Kaldor, Mary

    2002-01-01

    The paper provides a brief historical overview of the concept of civil society and the relevance of different meanings to the notion of 'voice' as it relates to poor people. It outlines civil society actors that might be helpful in clarifying different forms of accountability. And in the last section, it draws some conclusions and policy recommendations about the accountability of different types of civil society groups.

  1. Legalisation of Civil Wars

    DEFF Research Database (Denmark)

    Buhl, Kenneth Øhlenschlæger

    2009-01-01

    This article is concerned with the legal challenges of regulating civil wars in international humanitarian law. Civil war is not a term used in international law; it falls however, withing the context of the legal term 'armed conflicts not of an international character', although the shorter 'non......-international armed conflict' is used here. Civil wars are usually limited to the territory of a state. Considering that international law is generally concerned with the legal relations between states – being a legal system based on the system of states with states as its subjects – the main question is how civil...... wars as internal conflicts have become subject to international humanitarian law....

  2. Survey on integration of Applied Geology and Geomorphology in Civil Engineering curricula in the framework of the European Higher Education Area (EHEA) by using practical trips

    OpenAIRE

    Menéndez Pidal de Navascués, Ignacio; Sanz Pérez, Eugenio

    2011-01-01

    The engineer must have sufficient theoretical knowledge to be applied to solve specific problems, with the necessary capacity to simplify these approaches, and taking into account factors such as speed, simplicity, quality and economy. In Geology, its ultimate goal is the exploration of the history of the geological events through observation, deduction, reasoning and, in exceptional cases by the direct underground exploration or experimentation. Experimentation is very limited in Geology...

  3. Energy use, entropy and extra-terrestrial civilizations

    International Nuclear Information System (INIS)

    The possible number of extra-terrestrial civilizations is estimated by the Drake-equation. Many articles pointed out that there are missing factors and over-estimations in the original equation. In this article we will point out that assuming some axioms there might be several limits for a technical civilization. The key role of the energy use and the problem of the centres and periphery strongly influence the value of the Llifetime of a civilization. Our development have several edifications of the investigations of the growth of an alien civilization.

  4. Energy use, entropy and extra-terrestrial civilizations

    Energy Technology Data Exchange (ETDEWEB)

    Hetesi, Zsolt, E-mail: zs.hetesi@astro.elte.h [Eoetvoes University, Department of Astronomy, Budapest, H-1518, PO Box 32 (Hungary)

    2010-03-01

    The possible number of extra-terrestrial civilizations is estimated by the Drake-equation. Many articles pointed out that there are missing factors and over-estimations in the original equation. In this article we will point out that assuming some axioms there might be several limits for a technical civilization. The key role of the energy use and the problem of the centres and periphery strongly influence the value of the Llifetime of a civilization. Our development have several edifications of the investigations of the growth of an alien civilization.

  5. Effective control of engineering cost measures

    Institute of Scientific and Technical Information of China (English)

    郑虹; 戚悦

    2013-01-01

    the civil engineering cost function mainly lies in the calculation of the required for the construction cost to the sum of al. Civil engineering cost throughout the project, the efective use of human, financial weakness, can beter benefit our investment, so the control of civil engineering cost measures is very necessary.

  6. Refractions of Civil Society

    DEFF Research Database (Denmark)

    Kuzmanovic, Daniella

    The thesis investigates various perceptions of civil society among civic activists in Turkey, and how these perceptions are produced and shaped. The thesis is an anthropological contribution to studies of civil society in general, as well as to studies on political culture in Turkey....

  7. Apps for Ancient Civilizations

    Science.gov (United States)

    Thompson, Stephanie

    2011-01-01

    This project incorporates technology and a historical emphasis on science drawn from ancient civilizations to promote a greater understanding of conceptual science. In the Apps for Ancient Civilizations project, students investigate an ancient culture to discover how people might have used science and math smartphone apps to make their lives…

  8. Civil War and Inoperativity

    DEFF Research Database (Denmark)

    Flohr, Mikkel

    2016-01-01

    This article analyses the penultimate publication in Giorgio Agambens Homo Sacer-series Stasis: Civil War as a Political Paradigm. It compares and contrasts the paradigm of civil war with the preceding paradigm of the exception, and identifies a significant displacement in the relationship between...

  9. Abstracts of the Canadian Society for Civil Engineering annual conference including the general conference, the 1. international structural specialty conference, the 1. international construction specialty conference, and the 1. specialty conference on disaster mitigation : towards a sustainable future[General Conference

    Energy Technology Data Exchange (ETDEWEB)

    El-Badry, M.; Loov, R.E.; Ruwanpura, J.; El-Hacha, R. [Calgary Univ., AB (Canada); Kroman, J. [City of Calgary, AB (Canada); Rankin, J. [New Brunswick Univ., Fredericton, NB (Canada). Dept. of Civil Engineering; Dunaszegi, L. [Earth Tech Canada Inc., Calgary, AB (Canada)] (eds.)

    2006-07-01

    This conference provided a forum for national and international practicing engineers, researchers and technical experts to discuss sustainable solutions to infrastructure development. Discussions focused on recent developments in new technologies for building more economic and sustainable infrastructure, while improving the safety of buildings, bridges, roads, water supply and sewage treatment systems. The conference was held in conjunction with associated specialty conferences, including a first international structures specialty conference, a first international construction specialty conference, and a first specialty conference on disaster mitigation. This book of abstracts highlights all the specialty conferences and accompanies a CD-ROM that has the full text of all the papers. Manuscripts of the full papers submitted to the specialty conferences were peer-reviewed by international scientific committees. The general conference provided a forum to learn about new technologies and future directions in various areas of civil engineering. It included a special theme session on sustainable development and a special session on innovation and information technology. Other technical sessions focused on topics such as civil engineering history and education; infrastructure management and renewal; asset management; risk assessment and management; engineering materials and mechanics; environmental engineering and science; hydrotechnical engineering; cold region engineering; and, transportation engineering. The general conference featured 88 presentations, of which 15 have been catalogued separately for inclusion in this database.

  10. Reconceptualizing Civil Regulation

    DEFF Research Database (Denmark)

    Galang, Roberto Martin; Castello, Itziar

    2011-01-01

    This article re-conceptualizes the notion of civil regulation, through an analysis of 775 projects by firms located in 21 Asian countries, wherein we map the state of civil regulation initiatives in the region. We challenge two established assumptions in the Corporate Social Responsibility...... literature. First, contrary to what is commonly argued, we claim that strong states in Asia promote civil regulation in what we call the “paradox of the weak state”. Second, we not only argue that civil regulation is mainly enforced by multinational enterprises willing to promote international social and...... environmental standards; but also that local, small and medium companies play a key role in the development of Asian civil regulation. We call this second finding the “CSR importation trap”. Our findings are supported by evidence on the limitations in the interchangeable properties of business and governments...

  11. 土木工程专业博士研究生模块化课程体系构建研究%Research on the construction of modular curriculum system for PhD of civil engineering specialty

    Institute of Scientific and Technical Information of China (English)

    陈进; 刘元雪; 曾祥蓉; 王仲刚; 张力; 张蕾; 孙涛; 周凌

    2016-01-01

    文章以后勤工程学院为例,针对土木工程专业博士研究生普遍存在的“重论文研究,轻课程学习”的倾向,提出以未来岗位需求为牵引,以创新能力提高为主导,以人才培养为目标,改革传统层次化课程体系,采用模块化课程设计,形成基础课程模块、专业课程模块、拓展课程模块、研究课程模块等四大模块课程结构,加大教学内容创新力度,使模块化课程的教学内容凸显前沿性、动态性、实践性三种特性。同时探索“硬规定、活模块”的模块化课程教学实施模式,以及任课教师授课质量和博士研究生学习成绩两方面模块化课程评价体系的构建,为创建科学合理的土木工程专业博士研究生模块化课程体系打下基础。%Aiming at the tendency of emphasis on thesis research, ignoring courses for the current PhD in civil engineering of our university, we proposed that taking requirements of future job as traction, enhance of innovation capability as leading , and talent training as the goal, reform the traditional hierarchical course system by modular design, and form four modules structure including basis curriculum modules, specialty curriculum modules, expanding curriculum modules, research curriculum modules. And we increase innovation of teaching content which highlight three properties of cutting-edge, dynamic and practical, and explore the modular curriculum teaching implementation mode of hard stipulates living module, as well as construction of two modular curriculum evaluation system including classroom teaching quality and PhD students academic evaluation , so as to build a scientific and rational PhD modular curriculum system in civil engineering.

  12. Procurement Cost Analysis of the Turbofan Engine of Large Civil Aircraft%大型民用飞机涡扇发动机采购成本研究

    Institute of Scientific and Technical Information of China (English)

    熊华文; 王光秋

    2014-01-01

    The purpose of the paper is to improve the method available for estimating the procurement cost of tur-bofan engines for large civil aircraft. A new approach to analyze the R&D cost and production cost is studied based on the domestic and foreign studies. The newly developed turbofans are used to evaluate the accuracy of the meth-od. Engine list price is the reference to the market price. Procurement price is mainly determined by the market competition situation. Procurement price could be at big discount based on the negotiation between the engine man-ufacturers and the customers. Launching customers, big leasing companies and big airlines ( groups) tend to have big discount. Pricing practice of Rolls-Royce's aero engines is studied as an example of buying big civil turbofan engines. The results show that the estimation methodology of procurement cost is rational;the calculation is simple and practical;the precision of the calculations is accepted for the real requirements.%通过查阅大量国内外相关文献资料和报道,并结合作者的工作经验,首先探索了大型民用飞机发动机的研制和批生产成本的分析方法和计算模型,估算了市场上新型发动机的研制成本和批生产成本。然后提出了大型民用飞机发动机的基本价格计算方法,利用市场上新型涡扇发动机的参数进行计算分析,并结合飞机的基本价格进行了比较分析。在分析发动机成本、基本价格和市场竞争情况的基础上,分析了实际采购价格策略。研究表明,在市场经济条件下,发动机采购成本估算应采用“市场定价冶准则。提出的方法合理,计算简便易用,精度能满足实际需要。可以为中国研制大飞机项目提供参考,同时也可以为航空公司在选择和采购发动机时提供参考,以便合理估算大型民用飞机涡扇发动机的采购成本。

  13. On application of 3D printer in teaching of civil engineering of colleges%3D 打印机在高校土木工程教学中的应用探讨

    Institute of Scientific and Technical Information of China (English)

    张萍; 闫宇; 李苗; 刘翰然; 贾杰

    2016-01-01

    结合3D 打印技术在教学中的应用现状,从课程教学、结构设计大赛和科学研究三方面,分析了3D 打印技术应用于土木工程教学中的可行性,并总结了推广3D 打印机会遇到的诸多困难,指出3D 打印机可以应用于土建模型,同时能满足教学用具、结构设计大赛模型的建立等需求。%Accordinf to the present situation of 3D printer application,the paper points out the feasibility of three aspects’application includinf classroom instruction,structure desifn competition and scientific research. Besides,the paper summarizes many difficulties in promotinf 3D printer,points out 3D printer can be applied to civil enfineerinf model and meets the demand of educational affiliation and structure desifn com-petition.

  14. Engineering Correction of Civil Aircraft Wing's Ice Shape%民用飞机翼面冰形的工程修正

    Institute of Scientific and Technical Information of China (English)

    赵宾宾; 黎先平; 张淼; 周峰

    2013-01-01

    The icing of wing is an important factor of threats to flight's safety. Based on the numerical simulation of ice, this paper investigates airfoil icing engineering correction methods. Using icing analysis software Sadrice, the numerical simulation of different airfoils surface icing at the various states is done. According to the results of icing wind tunnel test, the change parameters are studied, which affect the ice shape, and the most effective meth-od of correction is obtained. Linearly, The current convective thermal parameter empirical formula is corrected, which fits the numerical shape well. A set of engineering methods to correct the numerical simulated ice shape is summarized in the end.%翼面结冰是威胁飞行安全的重要因素之一。以数值模拟结冰为基础,进行了翼型结冰的工程修正方面的研究。运用结冰分析软件Sadrice,对不同状态下的不同翼型进行表面冰形数值模拟。结合结冰风洞试验结果,对影响冰形的参数进行了变参研究,得到了最有效的修正方法。对现有对流换热系数经验公式进行线性修正,使修正对流换热系数经验公式后的预测冰形和冰风洞试验结果之间能够较好地吻合,最终总结出了一套工程修正数值模拟冰形的方法。

  15. From ``wiggly structures'' to ``unshaky towers'': problem framing, solution finding, and negotiation of courses of actions during a civil engineering unit for elementary students

    Science.gov (United States)

    Roth, Wolff-Michael

    1995-12-01

    The present study was designed to investigate problem- and solution-related activity of elementary students in ill-defined and open-ended settings. One Grade 4/5 class of 28 students engaged in the activities of the “Engineering for Children: Structures” curriculum, designed as a vehicle for introducing science concepts, providing ill-defined problem solving contexts, and fostering positive attitudes towards science and technology. Data included video recordings, ethnographic field notes, student produced artefacts (projects and engineering logbooks), and interviews with teachers and observers. These data supported the notion of problems, solutions, and courses of actions as entities with flexible ontologies. In the course of their negotiations, students demonstrated an uncanny competence to frame and reframe problems and solutions and to decide courses of actions of different complexities in spite of the ambiguous nature of (arte)facts, plans, and language. A case study approach was chosen as the literary device to report these general findings. The discussion focuses on the inevitably ambiguous nature of (arte)facts, plans, and language and the associated notion of “interpretive flexibility.” Suggestions are provided for teachers on how to deal with interpretive flexibility without seeking recourse to the didactic approaches of direct teaching. But what happens when problems and solutions are negotiable, when there are no longer isolated problems which one tries to solve but problems which maintain complex linkages with ensembles of other problems and diverse constraints, or when problems and solutions are simultaneously invented? (Lestel, 1989, p. 692, my translation)

  16. La Justificación Constitucional De La Desobediencia Civil

    OpenAIRE

    Oscar Mejía Quintana

    2003-01-01

    This essay tries to approach the problematic nature of the concept of civil disobedience, as compared to other versions of citizen resistance. It looks for a rich definition, based in authors like Rawls, Dworkin and Habermas, who have proposed an institutional version of civil disobedience. Form that point, the text defends the thesis of a constitutional justification of civil disobedience as a mechanism that is not only necessary but legitimate in contemporary democracies. It tries to guaran...

  17. The demography of extraterrestrial civilizations

    Science.gov (United States)

    Billingham, J.

    1981-01-01

    Studies carried out within the last ten years on the nature and distribution of extraterrestrial intelligent life are reviewed. Arguments for the absence of intelligent life in the Galaxy based on the assumption that at least some of these would have engaged in colonization and for the presence of colonies of extraterrestrials in some undiscovered location in the solar system are presented, and it is noted that both these views rest on the notion that interstellar travel can be achieved at high velocities in very large vehicles, which has been questioned. Alternative suggestions concerning interstellar exploration by automated probes and the possible extended time scale and motivation for galactic colonization are pointed out. Attention is then given to arguments for the extreme smallness of one of the factors in the Drake equation used to estimate the number of communicative extraterrestrial civilizations in the Galaxy, including the frequency of single stars, the likelihood that planets with the correct initial composition and conditions for life are at the proper distance from their stars, the probability of the formation of DNA and the origin of life, and the time for the evolution of intelligence. It is concluded that it seems likely that other civilizations exist in the Galaxy, although the number and distribution of such civilizations may only be determined by the detection of one or more examples.

  18. Research on the evaluation system of innovation and entrepreneurship of civil engineering in local colleges%地方高校土木工程专业创新创业评价体系研究

    Institute of Scientific and Technical Information of China (English)

    方光秀

    2016-01-01

    以延边大学土木工程专业为例,介绍了基于产学研的评价体系构成要素,并通过层次分析法,确定了指标权重,构建了创新创业评价体系,提出了地方高校在创新创业评价体系中须强化的内容及完善创新创业评价政策保障的建议。%By the case of Yanbian University civil engineering,this paper describes evaluation system components,based on produce,study and research. And this paper put forward analytic hierarchy process and the evaluation system of innovation and entrepreneurship. Meanwhile,we recommend that local colleges and universities must strengthen contents in the evaluation system of innovation and entrepreneurship,and complete indemnification in policy of evaluation of innovation and entrepreneurship.

  19. Application of FBG sensor in civil engineering detection%光纤光栅传感器应用于土木工程检测的实验研究

    Institute of Scientific and Technical Information of China (English)

    覃银辉; 刘文吉; 蒋华; 刘付华

    2011-01-01

    在两个钢梁-混凝土墙节点中的同一位置分别设置光纤光栅传感器与应变片,通过对比光纤光栅传感器与应变片显示的应变结果,对整个试件的受力过程进行测量和分析.结果表明:光纤光栅传感器比应变片的效果更好,测得的数据更准确,从而证明了光纤光栅传感器在土木工程检测应用中的可行性.%FBG sensors and strain gauges were set respectively at the same location between two rigid conjunction nodes of steel beam and concrete walL The strain values of the test specimen were measured through the sensors and gauges. The force process of the entire specimen was analyzed. The FBG sensors has better measuring effect than strain gauges, and the measured data are more accurate, thus proving the feasibility of FBG sensors for civil engineering detectioa

  20. 土建类专业多媒体教学质量评价研究%Research on multimedia course evaluation for architecture and civil engineering of university

    Institute of Scientific and Technical Information of China (English)

    宗全利; 程建军; 刘贞姬; 金瑾; 王建新

    2012-01-01

    根据高等工科院校土建类专业多媒体课堂教学特点,构建了多媒体课堂教学质量评价指标体系,并设计了调查问卷。利用统计学方法,计算每一因素的综合态度系数和得票指数,并根据计算结果判断出影响该因素的主要原因,最后结合分析结果提出了对高等院校土建类专业多媒体课堂教学的主要建议。%Based on the character of course teaching architecture and civil engineering specialty,the system of multimedia course evaluation has been built,and the questionnaire has been designed.Utilizing method of statistics,the integration attitude coefficient and ticket index of every factor have been calculated.Based on the results,the main reason has been judged,and the main suggestion of multimedia course has been advised.