WorldWideScience

Sample records for chromium oxides

  1. Oxidation of chromium telluride

    International Nuclear Information System (INIS)

    The authors study the interaction between chromium telluride and oxygen at elevated temperatures in view of its application in semiconductor technology. Thermodynamic analysis of the oxidation process and experimental data showed that the alloys of chromium telluride suffer oxidation in the presence of even traces of oxygen in a gaseous medium. Chromium telluride oxidation is a complex process that gives rise to various oxides and is accompanied by partial sublimation

  2. Oxidation of chromium telluride

    Energy Technology Data Exchange (ETDEWEB)

    Pakhomovskaya, N.S.; Iorga, E.V.; Sheveleva, T.F.; Solov' eva, A.E.

    1986-03-01

    The authors study the interaction between chromium telluride and oxygen at elevated temperatures in view of its application in semiconductor technology. Thermodynamic analysis of the oxidation process and experimental data showed that the alloys of chromium telluride suffer oxidation in the presence of even traces of oxygen in a gaseous medium. Chromium telluride oxidation is a complex process that gives rise to various oxides and is accompanied by partial sublimation.

  3. Alkane dehydrogenation over supported chromium oxide catalysts

    NARCIS (Netherlands)

    Weckhuysen, B.M.; Schoonheydt, R.A.

    1999-01-01

    The dehydrogenation of alkanes over supported chromium oxide catalysts in the absence of oxygen is of high interest for the industrial production of propene and isobutene. In this review, a critical overview is given of the current knowledge nowadays available about chromium-based dehydrogenation ca

  4. Surface Chemistry and Spectroscopy of Chromium in Inorganic Oxides

    OpenAIRE

    Weckhuysen, B. M.; Wachs, I.E.; Schoonheydt, R. A.

    1996-01-01

    Focuses on the surface chemistry and spectroscopy of chromium in inorganic oxides. Characterization of the molecular structures of chromium; Mechanics of hydrogenation-dehydrogenation reactions; Mobility and reactivity on oxidic surfaces.

  5. 21 CFR 73.1015 - Chromium-cobalt-aluminum oxide.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Chromium-cobalt-aluminum oxide. 73.1015 Section 73... LISTING OF COLOR ADDITIVES EXEMPT FROM CERTIFICATION Drugs § 73.1015 Chromium-cobalt-aluminum oxide. (a) Identity. The color additive chromium-cobalt-aluminum oxide is a blue-green pigment obtained by calcining...

  6. Chromium oxidation state mapping in human cells

    Science.gov (United States)

    Ortega, R.; Fayard, B.; Salomé, M.; Devès, G.; Susini, J.

    2003-03-01

    The widespread use of chromium in industrial applications such as chemical production of pigments, refractory brick production, tanning, metallurgy, electroplating, and combustion of fuels has lead to human occupational exposure and to its increased introduction into the environment. Hexavalent chromium compounds are established carcinogens but their mechanism of cell transformation is not known. Up to now, no microanalytical technique was sensitive enough to allow the observation of chromium distribution, and oxidation state identification, within isolated cells at carcinogenic concentrations. In this experiment, we used successfully the ID-21 X-ray microscope to map Cr(VI) and total Cr distributions in cells exposed in vitro to soluble, and insoluble, Cr(VI) compounds. Exposure to soluble compounds, weak carcinogens, resulted in a homogeneous intracellular distribution of Cr, confirming by in situ measurement that Cr is present in the cell nucleus. Cr(VI) was never detected in cells which suggests a mechanism of rapid intracellular reducticn. On the other hand, exposure to insoluble compounds, strong carcinogens, also resulted in a homogeneous distribution of reduced forms of Cr in cells, and their nucleus. However, in this case, Cr(VI)-rich structures were observed into the cells suggesting that carcinogenicity is enhanced when oxidation reactions due to Cr(VI) chronic exposure are associated to Cr-DNA alterations.

  7. Dimensionally Controlled Lithiation of Chromium Oxide

    Energy Technology Data Exchange (ETDEWEB)

    Fister, Tim T. [Argonne National Lab. (ANL), Argonne, IL (United States); Hu, Xianyi [Northwestern Univ., Evanston, IL (United States); Esbenshade, Jennifer [Univ. of Illinois, Urbana-Champaign, IL (United States); Chen, Xiao [Northwestern Univ., Evanston, IL (United States); Wu, Jinsong [Northwestern Univ., Evanston, IL (United States); Dravid, Vinayak [Northwestern Univ., Evanston, IL (United States); Bedzyk, Michael [Northwestern Univ., Evanston, IL (United States); Long, Brandon [Argonne National Lab. (ANL), Argonne, IL (United States); Gewirth, Andrew A. [Univ. of Illinois, Urbana-Champaign, IL (United States); Shi, Bing [Argonne National Lab. (ANL), Argonne, IL (United States); Schlepütz, Christian M. [Argonne National Lab. (ANL), Argonne, IL (United States); Fenter, Paul [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-01-12

    Oxide conversion reactions are an alternative approach for high capacity lithium ion batteries but are known to suffer from structural irreversibility associated with the phase separation and reconstitution of reduced metal species and Li2O. In particular, the morphology of the reduced metal species is thought to play a critical role in the electrochemical properties of a conversion material. Here we use a model electrode with alternating layers of chromium and chromium oxide to better understand and control these phase changes in real-time and at molecular length scales. Despite lacking crystallinity at the atomic scale, this superstructure is observed (with X-ray reflectivity, XR) to lithiate and delithiate in a purely one-dimensional manner, preserving the layered structure. The XR data show that the metal layers act as nucleation sites for the reduction of chromium in the conversion reaction. Irreversibility during delithiation is due to the formation of a ternary phase, LiCrO2, which can be further delithiated at higher potentials. The results reveal that the combination of confining lithiation to nanoscale sheets of Li2O and the availability of reaction sites in the metal layers in the layered structure is a strategy for improving the reversibility and mass transport properties that can be used in a wide range of conversion materials.

  8. Chromium

    Science.gov (United States)

    ... health risks of too much chromium? Chromium and medication interactions Supplemental sources of chromium Chromium and Healthful Diets References Disclaimer What foods provide chromium? Chromium is widely distributed in the ...

  9. Femtosecond laser surface structuring and oxidation of chromium thin coatings: Black chromium

    Energy Technology Data Exchange (ETDEWEB)

    Kotsedi, L., E-mail: Kotsedi@tlabs.ac.za [UNESCO-UNISA Africa Chair in Nanosciences-Nanotechnology, College of Graduate Studies, University of South Africa, Muckleneuk Ridge, P.O. Box 392, Pretoria (South Africa); Nanosciences African Network (NANOAFNET), iThemba LABS-National Research Foundation, 1 Old Faure Road, Somerset West 7129, P.O. Box 722, Somerset West, Western Cape (South Africa); Nuru, Z.Y. [UNESCO-UNISA Africa Chair in Nanosciences-Nanotechnology, College of Graduate Studies, University of South Africa, Muckleneuk Ridge, P.O. Box 392, Pretoria (South Africa); Nanosciences African Network (NANOAFNET), iThemba LABS-National Research Foundation, 1 Old Faure Road, Somerset West 7129, P.O. Box 722, Somerset West, Western Cape (South Africa); Mthunzi, P. [National Laser Centre, Council for Scientific and Industrial Research, 0001 Pretoria (South Africa); Muller, T.F.G. [University of the Western Cape, Physics Department, Bellville, 7535 Cape Town (South Africa); Eaton, S.M. [Physics Department, Politecnico di Milano, Piazza Leonardo Da Vinci, 32, 20133 Milano (Italy); Julies, B. [University of the Western Cape, Physics Department, Bellville, 7535 Cape Town (South Africa); Manikandan, E. [UNESCO-UNISA Africa Chair in Nanosciences-Nanotechnology, College of Graduate Studies, University of South Africa, Muckleneuk Ridge, P.O. Box 392, Pretoria (South Africa); Nanosciences African Network (NANOAFNET), iThemba LABS-National Research Foundation, 1 Old Faure Road, Somerset West 7129, P.O. Box 722, Somerset West, Western Cape (South Africa); Ramponi, R. [Physics Department, Politecnico di Milano, Piazza Leonardo Da Vinci, 32, 20133 Milano (Italy); Maaza, M. [UNESCO-UNISA Africa Chair in Nanosciences-Nanotechnology, College of Graduate Studies, University of South Africa, Muckleneuk Ridge, P.O. Box 392, Pretoria (South Africa); Nanosciences African Network (NANOAFNET), iThemba LABS-National Research Foundation, 1 Old Faure Road, Somerset West 7129, P.O. Box 722, Somerset West, Western Cape (South Africa)

    2014-12-01

    Highlights: • Oxidation of the chromium thin film to chromium oxide by femtosecond laser with a fundamental wavelength of 1064 nm. • Solar absorber from chromium oxide that low percentage reflectance. • Femtosecond laser oxidation, with a de-focused laser. • Chromium oxide formation by femtosecond laser in normal ambient. - Abstract: In view of their potential applications as selective solar absorbers, chromium coatings on float glass substrates were nano/micro structured by femtosecond laser in air. Raman and X-rays diffraction investigations confirmed the formation of an ultra-porous α-Cr{sub 2}O{sub 3} layer at the surface; higher is the input laser power, enhanced is the crystallinity of the α-Cr{sub 2}O{sub 3} layer. The α-Cr{sub 2}O{sub 3} layer with the Cr underneath it in addition to the photo-induced porosity acted as a classical ceramic–metal nano-composite making the reflectance to decrease significantly within the spectral range of 190–1100 nm. The average reflectance decreased from 70 to 2%.

  10. Femtosecond laser surface structuring and oxidation of chromium thin coatings: Black chromium

    International Nuclear Information System (INIS)

    Highlights: • Oxidation of the chromium thin film to chromium oxide by femtosecond laser with a fundamental wavelength of 1064 nm. • Solar absorber from chromium oxide that low percentage reflectance. • Femtosecond laser oxidation, with a de-focused laser. • Chromium oxide formation by femtosecond laser in normal ambient. - Abstract: In view of their potential applications as selective solar absorbers, chromium coatings on float glass substrates were nano/micro structured by femtosecond laser in air. Raman and X-rays diffraction investigations confirmed the formation of an ultra-porous α-Cr2O3 layer at the surface; higher is the input laser power, enhanced is the crystallinity of the α-Cr2O3 layer. The α-Cr2O3 layer with the Cr underneath it in addition to the photo-induced porosity acted as a classical ceramic–metal nano-composite making the reflectance to decrease significantly within the spectral range of 190–1100 nm. The average reflectance decreased from 70 to 2%

  11. The oxidation and reduction of chromium of stainless steels in an eletric arc furnace

    OpenAIRE

    Arh, B.; F. Tehovnik

    2011-01-01

    The oxidation of chromium during the elaboration of stainless steels occurs with oxygen in solution blown inthe melt and with oxides in the slag. A higher content of silicon in the furnace charge decreases the extent of oxidation of chromium, however, the efficient reduction of chromium from the slag is of essential importance for a minimal loss of chromium. In this survey, the theory of the oxidation of chromium, its reduction from the slag and the conditions for the formation of foaming sla...

  12. Structure and growth of oxide on iron-chromium alloys

    International Nuclear Information System (INIS)

    Several oxides form during the initial stages of oxidation of iron-chromium alloys at 400 to 6000C in CO2-1%CO gas. The nature of the oxidation product depends upon crystallographic orientation and composition of the substrate, and can be explained by considering the maximum solubility of chromium in different oxide phases together with interfacial and strain energy factors. Kinetics of oxidation together with micrographic observations indicate that, as oxidation proceeds spinel oxide M3O4 nucleates at sites on the substrate surface associated with asperities. The spinel nuclei grow laterally and vertically until they coalesce and the scale subsequently thickens according to a parabolic rate law. The duplex structure of scales is interpreted in terms of an outward diffusion of cations together with simultaneous growth of an inner layer in the space created by this outward movement. Scale porosity provides a route for gas-phase transport of oxidant to support the growth of the inner layer. Regularly spaced lamellar voids which may form in the inner layer are believed to be associated with a cyclic vacancy condensation process. Enrichment of the inner layer in chromium is explained by analysis of the possible diffusion path networks in close-packed oxides. Some comments are made concerning possible practical applications of these data. (author)

  13. 21 CFR 73.3110a - Chromium-cobalt-aluminum oxide.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Chromium-cobalt-aluminum oxide. 73.3110a Section... LISTING OF COLOR ADDITIVES EXEMPT FROM CERTIFICATION Medical Devices § 73.3110a Chromium-cobalt-aluminum oxide. (a) Identity. The color additive chromium-cobalt-aluminum oxide (Pigment Blue 36) (CAS Reg....

  14. The oxidation and reduction of chromium of stainless steels in an eletric arc furnace

    Directory of Open Access Journals (Sweden)

    B. Arh

    2011-07-01

    Full Text Available The oxidation of chromium during the elaboration of stainless steels occurs with oxygen in solution blown inthe melt and with oxides in the slag. A higher content of silicon in the furnace charge decreases the extent of oxidation of chromium, however, the efficient reduction of chromium from the slag is of essential importance for a minimal loss of chromium. In this survey, the theory of the oxidation of chromium, its reduction from the slag and the conditions for the formation of foaming slag are discussed.

  15. High temperature oxidation of iron-chromium alloys

    Energy Technology Data Exchange (ETDEWEB)

    Mikkelsen, Lars

    2003-06-15

    The high temperature oxidation of the ferritic alloy Fe78Cr22 has been investigated in the present work. The effect of small alloying additions of cerium and/or silicon was also investigated. The alloys were oxidized at 973, 1173 and 1373 K in either air or a hydrogen/argon mixture. The various reaction atmospheres contained between 0.02 and 50% water vapour. The oxide scales formed on the various alloys at 973 K consisted of thin chromia layers. The oxide scales grown on the alloys at 1173 K also consisted of a chromia layer. The microstructure of the chromia scales was found to depend on the reaction atmosphere. The chromia scales grown in hydrogen/argon atmospheres formed oxide whiskers and oxide ridges at the surface of the scales, while the chromia scales grown in air formed larger oxide grains near the surface. This difference in oxide microstructure was due to the vaporization of chromium species from the chromia scales grown in air. Two different growth mechanisms are proposed for the growth of oxide whiskers. The growth rate of the chromia scales was independent of the oxygen activity. This is explained by a growth mechanism of the chromia scales, where the growth is governed by the diffusion of interstitial chromium. The addition of silicon to the iron-chromium alloy resulted in the formation of silica particles beneath the chromia scale. The presence of silicon in the alloy was found to decrease the growth rate of the chromia scale. This is explained by a blocking mechanism, where the silica particles beneath the chromia scale partly block the outwards diffusion of chromium from the alloy to the chromia scale. The addition of cerium to the iron-chromium alloy improved the adhesion of the chromia scale to the alloy and decreased the growth rate of chromia. It was observed that the minimum concentration of cerium in the alloy should be 0.3 at.% in order to observe an effect of the cerium addition. The effect of cerium is explained by the &apos

  16. Recovery of Chromium from Waste Taning Liquors by Magnesium Oxide

    Directory of Open Access Journals (Sweden)

    Mahmood M. Barbooti

    2010-10-01

    Full Text Available This is a case study of AL-Za’afaraniya tanning factory, 15 km to the south of Baghdad, to spot light on simple chemical treatment of the discharged water to solve the environmental problems associated with its chromium content management. The treatment was extended to the recovery and reuse of chromium. Chromium was precipitated by the addition of magnesium oxide which also aid as a neutralizer for the acidic effluent. The laboratory treatment was carried out to find the optimum conditions. The wastewater samples were taken from the outline area of the tannery. Box-Wilson method was adopted to find useful relationships between the operating variables (temperature, mixing period and magnesium oxide dose and the pH and chromium content of effluent. The experimental data were successfully fitted to second order polynomial mathematical models for the treatment. The most favorable operating conditions for the treatment were: temperature, 30 ºC; mixing period, 50 min and magnesium oxide concentration, 3000 mg/L. On using the optimum conditions a mathematical model simulating the operation for the treatment was obtained as follows:Cr = 6.0848 – 0.001839 X11 – 0.105334 X12 – 0.041038 X13pH = 10.29086 – 0.001223 X11 – 0.140043 X12 – 0.00953 X13Experimentally Cr concentration was decreased to about (0.5 mg/L in wastewater after raising the pH value to (7.35 by adding magnesium oxide.

  17. Structural, morphological and optical properties of chromium oxide nanoparticles

    Science.gov (United States)

    Babukutty, Blessy; Parakkal, Fasalurahman; Bhalero, G. M.; Aravind, P. B.; Nair, Swapna S.

    2015-06-01

    Chromium oxide nanoparticles are synthesized by reduction route from chloride precursors with surfactant, trioctylphosphine oxide (TOPO). Structural and morphological characterization are analyzed using X-ray Diffraction (XRD) and Transmission Electron Microscopy (TEM). Transmission Electron micrographs show that the average grain size lies in the range 5nm to 10nm. Optical characterization has been done by UV-VIS spectrophotometer. Distinct optical absorptions of Cr3+ ions show hinting towards the presence of Cr2O3. Presence of oxygen is also confirmed from Electron Energy Loss Spectroscopy (EELS) studies.

  18. Structural, morphological and optical properties of chromium oxide nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Babukutty, Blessy; Parakkal, Fasalurahman; Nair, Swapna S., E-mail: swapna.s.nair@gmail.com [School of Mathematical and Physical Sciences, Department of Physics, Central University of Kerala, Kasaragod 671314 (India); Bhalero, G. M. [UGC-DAE, IGCAR, Kalpakkam, TamilNadu (India); Aravind, P. B. [Cochin University of Science and Technology(CUSAT), Cochin (India)

    2015-06-24

    Chromium oxide nanoparticles are synthesized by reduction route from chloride precursors with surfactant, trioctylphosphine oxide (TOPO). Structural and morphological characterization are analyzed using X-ray Diffraction (XRD) and Transmission Electron Microscopy (TEM). Transmission Electron micrographs show that the average grain size lies in the range 5nm to 10nm. Optical characterization has been done by UV-VIS spectrophotometer. Distinct optical absorptions of Cr{sup 3+} ions show hinting towards the presence of Cr{sub 2}O{sub 3}. Presence of oxygen is also confirmed from Electron Energy Loss Spectroscopy (EELS) studies.

  19. Structural, morphological and optical properties of chromium oxide nanoparticles

    International Nuclear Information System (INIS)

    Chromium oxide nanoparticles are synthesized by reduction route from chloride precursors with surfactant, trioctylphosphine oxide (TOPO). Structural and morphological characterization are analyzed using X-ray Diffraction (XRD) and Transmission Electron Microscopy (TEM). Transmission Electron micrographs show that the average grain size lies in the range 5nm to 10nm. Optical characterization has been done by UV-VIS spectrophotometer. Distinct optical absorptions of Cr3+ ions show hinting towards the presence of Cr2O3. Presence of oxygen is also confirmed from Electron Energy Loss Spectroscopy (EELS) studies

  20. Study of Chromium Oxide Activities in EAF Slags

    Science.gov (United States)

    Yan, Baijun; Li, Fan; Wang, Hui; Sichen, Du

    2016-02-01

    The activity coefficients of chromium in Cu-Cr melts were determined by equilibrating liquid copper with solid Cr2O3 in CO-CO2 atmosphere. The temperature dependence of the activity coefficients of chromium in Cu-Cr melts could be expressed as lg γ_{Cr}(s)^{0} = { 3 2 5 9( ± 1 8 6} )/T - 0. 5 9( { ± 0. 1} ). Based on the above results, the activities of bivalent and trivalent chromium oxide in some slags at 1873 K (1600 °C) were measured. The slags were equilibrated with Cu-Cr melts under two oxygen partial pressures ( {p_{O}_{ 2} }} } = 6.9 × 10-4 and 1.8 × 10-6 Pa, respectively). The morphology of the quenched slags and the solubility of chromium oxide in the melts were investigated by EPMA, SEM, and XRD. Under both oxygen partial pressures, the slags were saturated by the solid solution MgAl2- x Cr x O4- δ . At the low oxygen partial pressure (1.8 × 10-6 Pa), the content of Cr in the liquid phase varied from 0.4 to 1.6 mass pct with the total Cr content in the slags increasing from 1.3 to 10.8 mass pct. At the high oxygen partial pressure (6.9 × 10-4 Pa), the content of Cr in the liquid phase decreased to the level of 0.2 to 0.6 mass pct. Both the activities of CrO and Cr2O3 in slag were found to increase approximately linearly with the increase of the total Cr content in slag. While the oxygen partial pressure had minor effect on the activity of Cr2O3 in the slag, it had significant effect on the activity of CrO.

  1. Raman spectroscopy of supported chromium oxide catalysts : determination of chromium-oxygen bond distances and bond orders

    NARCIS (Netherlands)

    Weckhuysen, B.M.; Wachs, I.E.

    1996-01-01

    An empirical correlation is described for relating Raman stretching frequencies of chromium—oxygen (Cr—O) bonds to their bond lengths in chromium oxide reference compounds. An exponential fit of crystallographically determined Cr—O bond lengths to Cr—O Raman symmetric stretching frequencies (800–130

  2. Ab initio calculation of chromium oxide containing Ti dopant

    International Nuclear Information System (INIS)

    Highlights: ► Microstructure changes in chromium oxide due to the Ti doping. ► Discovery of magnetism in Ti-doped α-Cr2O3 crystal. ► Explanation of the origin of n-type electrical conductivity. ► Detailed analysis of electronic properties and density of states. ► As to authors’ knowledge, Ti-doped crystal is studied for the first time by the DFT. - Abstract: First-principles computations based on the density functional theory within the generalised gradient approximation and introduced intra-atomic interaction term for strongly correlated electrons (DFT + U method) has been used in this work. Ti impurity doping in the α-Cr2O3 crystal has been carried out considering single defect model within the periodic crystalline structure. Atomic displacements, Bader charges on atoms have been computed showing that Ti dopant converts the chemical bonding in its neighbourhood into more ionic one. The defect-local microstructure is such as there exist general tendency of atomic rearrangements away with respect to the Ti imperfection. It is found that defect incorporation produces some local changes upon the band structure of the material and also induces a metallic state. That implies n-type electrical conductivity in the Ti-doped α-Cr2O3 crystals and relates our work directly to a number of experimental studies in this area. Our results provide evidence over change in magnetic moments in the vicinity of defect, which means that the chromium oxide doped with Ti impurity might not act as an antiferromagnetic substance.

  3. Ab initio calculation of chromium oxide containing Ti dopant

    Energy Technology Data Exchange (ETDEWEB)

    Maldonado, Frank [Grupo de Fisicoquimica de Materiales, Universidad Tecnica Particular de Loja, Apartado 11-01-608, Loja (Ecuador); Novillo, Corina [Escuela de Ingenieria Quimica, Universidad Tecnica Particular de Loja, Apartado 11-01-608, Loja (Ecuador); Stashans, Arvids, E-mail: arvids@utpl.edu.ec [Grupo de Fisicoquimica de Materiales, Universidad Tecnica Particular de Loja, Apartado 11-01-608, Loja (Ecuador)

    2012-01-17

    Highlights: Black-Right-Pointing-Pointer Microstructure changes in chromium oxide due to the Ti doping. Black-Right-Pointing-Pointer Discovery of magnetism in Ti-doped {alpha}-Cr{sub 2}O{sub 3} crystal. Black-Right-Pointing-Pointer Explanation of the origin of n-type electrical conductivity. Black-Right-Pointing-Pointer Detailed analysis of electronic properties and density of states. Black-Right-Pointing-Pointer As to authors' knowledge, Ti-doped crystal is studied for the first time by the DFT. - Abstract: First-principles computations based on the density functional theory within the generalised gradient approximation and introduced intra-atomic interaction term for strongly correlated electrons (DFT + U method) has been used in this work. Ti impurity doping in the {alpha}-Cr{sub 2}O{sub 3} crystal has been carried out considering single defect model within the periodic crystalline structure. Atomic displacements, Bader charges on atoms have been computed showing that Ti dopant converts the chemical bonding in its neighbourhood into more ionic one. The defect-local microstructure is such as there exist general tendency of atomic rearrangements away with respect to the Ti imperfection. It is found that defect incorporation produces some local changes upon the band structure of the material and also induces a metallic state. That implies n-type electrical conductivity in the Ti-doped {alpha}-Cr{sub 2}O{sub 3} crystals and relates our work directly to a number of experimental studies in this area. Our results provide evidence over change in magnetic moments in the vicinity of defect, which means that the chromium oxide doped with Ti impurity might not act as an antiferromagnetic substance.

  4. Peculiarities of luminescence of nanostructured aluminum oxide with chromium impurity

    International Nuclear Information System (INIS)

    Comparative study of Cr3+ ions photo-, X-ray- and cathodoluminescence in R-lines region in monocrystal and nanostructural aluminium oxide samples with different phase composition is conducted. Peculiarities of chromium impurity inclusion into Al2O3 nanocrystal lattices at high-temperature thermal treatment of Al2O3 and Cr2O3 nanopowders mixture are revealed. It is shown that aluminium oxides nanostructuring can result in formation of complicated aggregate complexes which include anion vacancies and impurity cations. It is marked that the most likely cause of quenching of R-lines luminescence and their broadening at Al2O3 crystal symmetry decrease in α → θ → δ → γ series is anion sublattice disordering while action of crystal field is responsible for levels displacement. It is established that thermal treatment at 1200 deg C doesn't result in complete transformation of nanostructural Al2O3 into α-form as it takes place in macro state

  5. Chromium related degradation of solid oxide fuel cells; Chrom-bezogene Degradation von Festoxid-Brennstoffzellen

    Energy Technology Data Exchange (ETDEWEB)

    Neumann, Anita

    2011-05-04

    Solid Oxide Fuel Cells (SOFCs) offer a high potential for application as an auxiliary power unit (APU) for heavy goods vehicles as well as combined heat and power (CHP) systems. SOFCs are especially attractive due to their high efficiencies and the use of different fuel types. However, optimization in terms of long term stability and costs are still necessary. This work characterized the degradation of SOFCs with lanthanum strontium manganite (LSM) cathodes under chromium influence. Galvanostatic cell tests were carried out at 800 C with operation times from 250 - 3000 h and variation of the chromium source and current density. The current densities of j = 0 (A)/(cm{sup 2}), j = 0,3 (A)/(cm{sup 2}) and j = 0,5 (A)/(cm{sup 2}) were applied. The high temperature ferritic alloy Crofer22APU was used as a chromium source. Variation of the chromium source was realized by coating the Crofer22APU insert with the chromium retention layer Mn{sub 3}O{sub 4} and the cathode contact layer LCC10. Cell degradation was analyzed with regard to cell voltage, current density and area specific resistance (ASR). Microstructural alterations of the cathode as well as chromium content and distribution across the cell were investigated after completion of the cell tests. For cells with a chromium source present and operation with a nonzero current density, the course of cell degradation was divided into three phases: a run-in, weak linear degradation and strong linear degradation. A decrease of the chromium release rate by means of different coatings stretched the course of degradation along the timescale. Strong degradation, which is characterized by a significant increase in ASR as well as a decrease of current density at the operating point, was only observed when a chromium source in the setup was comb ined with operation of the cell with a non-zero current density. Operation of the cell with a chromium source but no current density caused a degradation of current density at the

  6. Enhancing collagen stability through nanostructures containing chromium(III) oxide.

    Science.gov (United States)

    Sangeetha, Selvam; Ramamoorthy, Usha; Sreeram, Kalarical Janardhanan; Nair, Balachandran Unni

    2012-12-01

    Stabilization of collagen for various applications employs chemicals such as aldehydes, metal ions, polyphenols, etc. Stability against enzymatic, thermal and mechanical degradation is required for a range of biomedical applications. The premise of this research is to explore the use of nanoparticles with suitable functionalization/encapsulation to crosslink with collagen, such that the three dimensional architecture had the desired stability. Collagen solution prepared as per standard protocols is treated with chromium(III) oxide nanoparticules encapsulated within a polymeric matrix (polystyrene-block-polyacrylic acid copolymer). Selectivity towards encapsulation was ensured by the reaction in dimethyl sulfoxide, where the PS groups popped out and encapsulated the Cr(2)O(3). Subsequently when immersed in aqueous solution, PAA units popped up to react with functional groups of collagen. The interaction with collagen was monitored through techniques such as CD, FTIR, viscosity measurements, stress analysis. CD studies and FTIR showed no degradation of collagen. Thermal stability was enhanced upon interaction of nanostructures with collagen. Self-assembly of collagen was delayed but not inhibited, indicating a compete binding of the metal oxide encapsulated polymer to collagen. Metal oxide nanoparticles encapsulated within a polymeric matrix could provide thermal and mechanical stability to collagen. The formed fibrils of collagen could serve as ideal material for various smart applications such as slow/sustained drug release. The study is also relevant to the leather industry in that the nanostructures can diffuse through the highly networked collagen fibre bundles in skin matrix easily, thus overcoming the rate limiting step of diffusion. PMID:22766281

  7. Electrochemical characterization of oxide formed on chromium containing mild steel alloys in LiOH medium

    International Nuclear Information System (INIS)

    Flow accelerated corrosion leads to wall thinning of outlet-feeder pipes in the primary heat transport system of pressurized heavy water reactors and can even necessitate enmasse feeder replacement. Replacement of carbon steel 106-grade-B (CS) with chromium containing carbon steel reduces the risk of this failure. This paper discusses the role of small additions of chromium in modifying the properties of the oxide film. CS and chromium containing mild steels viz., A333, 2.25Cr–1Mo and modified 9Cr–1Mo alloy were exposed to primary heat transport (PHT) system chemistry conditions. The oxide films formed were characterized by electrochemical and surface characterization techniques. Mott–Schottky analysis showed donor type of defects. The densities of defects in the oxides of chromium containing alloys were 3–15 times less than that in CS. In presence of ∼200 ppb of dissolved oxygen, the oxides formed were hematite with two orders of magnitude smaller concentration of defects as compared to that formed under reducing conditions. These results suggest that the presence of chromium lowers the defect density of the oxide film and thus ensures a reduced corrosion rate. - Graphical abstract: Display Omitted - Highlights: • High temperature oxides formed on Cr containing mild steels are less defective. • Defect densities of oxides decrease with increase in Cr content in the alloy. • O2 in solution greatly influences the nature and defect chemistry of oxides

  8. Development of Alkaline Oxidative Dissolution Methods for Chromium (III) Compounds Present in Hanford Site Tank Sludges

    Energy Technology Data Exchange (ETDEWEB)

    NN Krot; VP Shilov; AM Fedoseev; NA Budantseva; MV Nikonov; AB Yusov; AYu Garnov; IA Charushnikova; VP Perminov; LN Astafurova; TS Lapitskaya; VI Makarenkov

    1999-07-02

    The high-level radioactive waste sludge in the underground storage tanks at the Hanford Site contains various chromium(III)solid phases. Dissolution and removal of chromium from tank waste sludges is desirable prior to high-level waste vitrification because increased volume is required to incorporate the residual chromium. Unfortunately, dissolution of chromium from the sludge to form Cr(OH){sub 4}{sup {minus}} through treatment with heated NaOH solution (also used to dissolve aluminum phases and metathesize phosphates to sodium salts) generally has been unsuccessful in tests with both simulated and genuine Hanford waste sludges. Oxidative dissolution of the Cr(III) compounds to form soluble chromate has been proposed as an alternative chromium solid phase dissolution method and results of limited prior testing have been reported.

  9. Effect of Chromium Ion Implantation on the Oxidation Rate of Iron andSteel

    International Nuclear Information System (INIS)

    This research discussed about the effect of chromium ion implantation onthe oxidation rate of iron (Fe 95.5 %) and steel (AISI 304). The measurementof oxidation resistance of the samples was carried out in dry oxygen mediumat high temperature conditions and the time of observation was varied. Theoxidation resistance can be analyzed by the changing of weight before andafter the process. The result showed that for iron materials (Fe 95.5 %)implanted chromium ion at energy 100 keV and ion dose 5 x 1017 ion/cm2increase the oxidation resistance in order of 28.68 %. But for AISI 304 steelimplanted chromium ion at the same conditions, the oxidation resistancedecreased. This phenomena is caused by the fact that the content of chromiummaybe already exceed the solubility of base material and it will create thepossibility of the formation of oxid spinel which less protective. (author)

  10. Role of Iron Anode Oxidation on Transformation of Chromium by Electrolysis

    OpenAIRE

    Sarahney, Hussam; Mao, Xuhui; Alshawabkeh, Akram N.

    2012-01-01

    The potential for chemical reduction of hexavalent chromium Cr(VI) in contaminated water and formation of a stable precipitate by Zero Valent Iron (ZVI) anode electrolysis is evaluated in separated electrodes system. Oxidation of iron electrodes produces ferrous ions causing the development of a reducing environment in the anolyte, chemical reduction of Cr(VI) to Cr(III) and formation of stable iron-chromium precipitates. Cr(VI) transformation rates are dependent on the applied electric curre...

  11. Investigations on the Oxidation of Iron-chromium and Iron-vanadium Molten Alloys

    OpenAIRE

    Wang, Haijuan

    2010-01-01

    With the progress of high alloy steelmaking processes, it is essential to minimize the loss of valuable metals, like chromium and vanadium during the decarburization process, from both economic as well as environmental view points. One unique technique to realize this aim, used in the present work, is the decarburization of high alloy steel grades using oxygen with CO2 in order to reduce the partial pressure of oxygen. In the present work, the investigation on the oxidation of iron-chromium a...

  12. Zinc-oxide charge trapping memory cell with ultra-thin chromium-oxide trapping layer

    Directory of Open Access Journals (Sweden)

    Nazek El-Atab

    2013-11-01

    Full Text Available A functional zinc-oxide based SONOS memory cell with ultra-thin chromium oxide trapping layer was fabricated. A 5 nm CrO2 layer is deposited between Atomic Layer Deposition (ALD steps. A threshold voltage (Vt shift of 2.6V was achieved with a 10V programming voltage. Also for a 2V Vt shift, the memory with CrO2 layer has a low programming voltage of 7.2V. Moreover, the deep trapping levels in CrO2 layer allows for additional scaling of the tunnel oxide due to an increase in the retention time. In addition, the structure was simulated using Physics Based TCAD. The results of the simulation fit very well with the experimental results providing an understanding of the charge trapping and tunneling physics.

  13. Activities of chromium oxides in slag in the process of argon-oxygen refining of corrosion-resistant steel

    International Nuclear Information System (INIS)

    On the basis of computer simulation results and available experimental data the behaviour of chromium oxides on stainless steel refining is studied. It is revealed that during melting and argon-oxygen refining of stainless steels chromium oxides occur in the solution if the slag contains not more than 25% (by mass) Cr2O3; this fact generates a need for accounting chromium oxide activity in thermodynamic calculations. An increase of Cr2O3 activity in the slag of this type results in increasing percentage ratio of chromium and carbon in the metal

  14. Influence of promoters and oxidants on propane dehydrogenation over chromium-oxide catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Lapidus, A.L.; Agafonov, Yu.A.; Shaporeva, N.Yu.; Trushin, D.V.; Gaidai, N.A.; Nekrasov, N.V. [Russian Academy of Sciences, Moscow (Russian Federation). N.D. Zelinsky Inst. of Organic Chemistry

    2010-12-30

    Possibilities for increasing the efficiency of supported on SiO{sub 2} chromium-oxide catalysts in propane oxidative dehydrogenation in CO{sub 2} presence are investigated: the introduction of Li, Na, K, Ca in catalysts and the addition of O{sub 2} in the reaction mixture. It was been found that the positive role of K - the increase of the selectivity to propene and stability of catalysts at long-duration tests - appeared at the relation of Cr:K=20. It was shown that the presence of little amount of O{sub 2} (2%) in the reaction mixtures of propane and carbon dioxide resulted in the increase of propene yield and catalyst stability. (orig.)

  15. Opto-electronic properties of chromium doped indium-tin-oxide films deposited at room temperature

    International Nuclear Information System (INIS)

    Indium-tin-oxide (ITO) doped chromium films were deposited on Corning 7059 glass prepared by radio frequency (RF) magnetron sputtering under various levels of sputtering power for the chromium target. Experimental results show that the surface roughness slightly decreases by co-sputtering Cr. The pure ITO films deposited at room temperature were amorphous-like. At 15 W of chromium target power, the structure of ITO: Cr film mainly consists of (2 2 2) crystallization plane, with minority of (2 1 1), (4 4 0), (6 6 2) crystallization planes. The carrier concentration of the ITO films increases with increasing the doping of chromium, however the mobility of the carrier decreases. When the sputtering power of the chromium target is at 7.5 W, there has a maximum carrier mobility of 27.3 cm2 V -1 s -1, minimum carrier concentration of 2.47 x 1020 cm-3, and lowest resistivity of 7.32 x 10-4 Ω cm. The transmittance of all the chromium doped ITO films at the 300-800 nm wavelength region in this experiment can reach up to 70-85%. In addition, the blue shift of UV-Vis spectrum is not observed with the increase of carrier concentration

  16. Electron microscopic study on pyrolysis of CCA (chromium, copper and arsenic oxide)-treated wood

    NARCIS (Netherlands)

    Hata, T.; Bronsveld, P.M; Vystavel, T.; Kooi, B.J.; de Hosson, J.T.M.; Kakitani, T.; Otono, A.; Imamura, Y.

    2003-01-01

    The effectiveness of pyrolysis as a possible technique for disposing of CCA (chromium, copper and arsenic oxide)-treated wood was studied. A CCA-treated sample given an extra heat treatment at 450 degreesC for 10 min was thoroughly investigated in order to establish the details of the reaction in wh

  17. Compact chromium oxide thin film resistors for use in nanoscale quantum circuits

    Energy Technology Data Exchange (ETDEWEB)

    Nash, C. R.; Fenton, J. C.; Constantino, N. G. N.; Warburton, P. A. [London Centre for Nanotechnology, UCL, 17–19 Gordon Street, London WC1H 0AH (United Kingdom)

    2014-12-14

    We report on the electrical characterisation of a series of thin amorphous chromium oxide (CrO{sub x}) films, grown by dc sputtering, to evaluate their suitability for use as on-chip resistors in nanoelectronics. By increasing the level of oxygen doping, the room-temperature sheet resistance of the CrO{sub x} films was varied from 28 Ω/◻ to 32.6 kΩ/◻. The variation in resistance with cooling to 4.2 K in liquid helium was investigated; the sheet resistance at 4.2 K varied with composition from 65 Ω/◻ to above 20 GΩ/◻. All of the films measured displayed linear current–voltage characteristics at all measured temperatures. For on-chip devices for quantum phase-slip measurements using niobium–silicon nanowires, interfaces between niobium–silicon and chromium oxide are required. We also characterised the contact resistance for one CrO{sub x} composition at an interface with niobium–silicon. We found that a gold intermediate layer is favourable: the specific contact resistivity of chromium-oxide-to-gold interfaces was 0.14 mΩcm{sup 2}, much lower than the value for direct CrO{sub x} to niobium–silicon contact. We conclude that these chromium oxide films are suitable for use in nanoscale circuits as high-value resistors, with resistivity tunable by oxygen content.

  18. Atom probe study of chromium oxide spinels formed during intergranular corrosion

    International Nuclear Information System (INIS)

    Atom probe microscopy has been used to study the inhomogeneous nature of chromium oxide spinels in intergranular corrosion of a 253 MA austenitic stainless steel after thermal cycling up to 970 °C in air. The results indicate that the non-continuous character of the spinel layers originates from nanoscale phases such as iron-rich oxides along the chromite grain boundaries and silicate particles. Their role in the rate of intergranular corrosion is discussed

  19. Chromium III histidinate exposure modulates antioxidant gene expression in HaCaT human keratinocytes exposed to oxidative stress

    Science.gov (United States)

    While the toxicity of hexavalent chromium is well established, trivalent Cr (Cr(III)) is an essential nutrient involved in insulin and glucose homeostasis. Recently, antioxidant effects of chromium (III) histidinate (Cr(III)His) were reported in HaCaT human keratinocytes exposed to oxidative stress...

  20. Chromium VI adsorption on cerium oxide nanoparticles and morphology changes during the process

    International Nuclear Information System (INIS)

    In this study, suspended cerium oxide nanoparticles stabilized with hexamethylenetetramine were used for the removal of dissolved chromium VI in pure water. Several concentrations of adsorbent and adsorbate were tested, trying to cover a large range of possible real conditions. Results showed that the Freundlich isotherm represented well the adsorption equilibrium reached between nanoparticles and chromium, whereas adsorption kinetics could be modeled by a pseudo-second-order expression. The separation of chromium-cerium nanoparticles from the medium and the desorption of chromium using sodium hydroxide without cerium losses was obtained. Nanoparticles agglomeration and morphological changes during the adsorption-desorption process were observed by TEM. Another remarkable result obtained in this study is the low toxicity in the water treated by nanoparticles measured by the Microtox commercial method. These results can be used to propose this treatment sequence for a clean and simple removal of drinking water or wastewater re-use when a high toxicity heavy metal such as chromium VI is the responsible for water pollution.

  1. Influence of Nanometric Ceria Coating on Oxidation Behavior of Chromium at 900 ℃

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Isothermal and cyclic oxidation behaviors of chromium samples with and without nanometric CeO2 coating were studied at 900 ℃ in air. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), and high-resolution electron microscopy (HREM) were used to examine the morphology and microstructure of the oxide film. It was found that ceria coating greatly improved the oxidation resistance of Cr both in isothermal and cyclic oxidizing experiments. Acoustic emission (AE) technique was used in situ to monitor the cracking and spalling of oxide film, and AE signals were analyzed in time-domain and number-domain according to related oxide fracture model. Laser Raman spectrometer was also used to study the stress of oxide film formed on Cr with and without ceria. The improvement in oxidation resistance of chromium is believed mainly due to that ceria greatly reduced the growth speed and grain size of Cr2O3. This fine-grained Cr2O3 oxide film might have better high temperature plasticity and could relieve parts of the compressive stress by means of creeping and maintained ridge character and relatively lower level of internal stress. Meanwhile, ceria application reduced the size and number of interfacial defects, remarkably enhanced the adhesive property of Cr2O3 oxide scale formed on Cr substrate.

  2. The Oxidation Characteristics of Modified High-Chromium Ferritic Steel for High Temperature

    International Nuclear Information System (INIS)

    The Oxidation properties of modified high chromium ferritic steels were investigated in steam and in air at 600 .deg. C, 650 .deg. C, and in thermal cyclic condition between 400 .deg. C and 600 .deg. C. In steam, the internal oxidation occurred deeply, and the formation of Cr2O3 protective scale was prevented, so the oxidation rate was 5∼20 times higher than that in air. The oxidation rate decreased with increasing Cr content and with decreasing grain size. In the zone of internal oxidation, the microhardness was higher than that in the matrix because of the formation of fine oxide particles. Finally, the existence of W-oxide and Mo-oxide was not observed by the analysis of EPMA and XRD

  3. In situ photoacoustic study of water gas shift reaction over magnetite/chromium oxide and copper/zinc oxide catalysts

    International Nuclear Information System (INIS)

    Kinetic studies on the water-gas shift reaction catalyzed by magnetite/chromium oxide and copper/zinc oxide were carried out by using an in situ photoacoustic spectroscopic technique. The reactions were performed in a closed-circulation reactor system using a differential photoacoustic cell at total pressure of 40 Torr in the temperature range of 100 to 350 .deg. C. The CO2 photoacoustic signal varying with the concentration of CO2 during the catalytic reaction was recorded as a function of time. The time-resolved photoacoustic spectra obtained for the initial reaction stage provided precise data of CO2 formation rate. The apparent activation energies determined from the initial rates were 74.7 kJ/mol for the magnetite/chromium oxide catalyst and 50.9 kJ/mol for the copper/zinc oxide catalyst. To determine the reaction orders, partial pressures of CO(g) and H2O(g) in the reaction mixture were varied at a constant total pressure of 40 Torr with N2 buffer gas. For the magnetite/chromium oxide catalyst, the reaction orders with respect to CO and H2O were determined to be 0.93 and 0.18, respectively. For the copper/zinc oxide catalyst, the reaction orders with respect to CO and H2O were determined to be 0.79 and 0, respectively

  4. Oxidation of a novel CeO{sub 2}-dispersed chromium coating in wet air

    Energy Technology Data Exchange (ETDEWEB)

    Peng, X.; Yan, J.; Zheng, L.; Wang, F. [State Key Laboratory for Corrosion and Protection, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016 (China)

    2011-06-15

    An electrodeposited Ni-CeO{sub 2} composite was used as a ''precursor film'' for a novel CeO{sub 2}-dispersed chromium coating deposited using a traditional pack cementation method. The substrate was a carbon steel. For comparison, chromium coatings were also prepared on the untreated and pure Ni-film-treated carbon steel using the same pack cementation conditions. Oxidation in 5% O{sub 2} + 40% H{sub 2}O + N{sub 2} at 900 C showed that, compared to the CeO{sub 2}-free coating counterparts, the CeO{sub 2}-dispersed chromium coating exhibited greatly increased oxidation resistance, owing to the development of a denser and more slowly growing chromia scale. The slow growth of the scale was correlated with the CeO{sub 2} dispersion exerting the so-called ''reactive elemental effect (REE)'' on oxidation. The oxidation mechanisms in wet air of the various types of coatings were compared to those in dry air and are fully discussed in this work. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  5. Enhanced sludge processing of HLW: Hydrothermal oxidation of chromium, technetium, and complexants by nitrate. 1997 mid-year progress report

    International Nuclear Information System (INIS)

    'Treatment of High Level Waste (HLW) is the second most costly problem identified by OEM. In order to minimize costs of disposal, the volume of HLW requiring vitrification and long term storage must be reduced. Methods for efficient separation of chromium from waste sludges, such as the Hanford Tank Wastes (HTW), are key to achieving this goal since the allowed level of chromium in high level glass controls waste loading. At concentrations above 0.5 to 1.0 wt.% chromium prevents proper vitrification of the waste. Chromium in sludges most likely exists as extremely insoluble oxides and minerals, with chromium in the plus III oxidation state [1]. In order to solubilize and separate it from other sludge components, Cr(III) must be oxidized to the more soluble Cr(VI) state. Efficient separation of chromium from HLW could produce an estimated savings of $3.4B[2]. Additionally, the efficient separation of technetium [3], TRU, and other metals may require the reformulation of solids to free trapped species as well as the destruction of organic complexants. New chemical processes are needed to separate chromium and other metals from tank wastes. Ideally they should not utilize additional reagents which would increase waste volume or require subsequent removal. The goal of this project is to apply hydrothermal processing for enhanced chromium separation from HLW sludges. Initially, the authors seek to develop a fundamental understanding of chromium speciation, oxidation/reduction and dissolution kinetics, reaction mechanisms, and transport properties under hydrothermal conditions in both simple and complex salt solutions. The authors also wish to evaluate the potential of hydrothermal processing for enhanced separations of technetium and TRU by examining technetium and TRU speciation at hydrothermal conditions optimal for chromium dissolution.'

  6. Environmental Factors Affecting Chromium-Manganese Oxidation-Reduction Reactions in Soil

    Institute of Scientific and Technical Information of China (English)

    D.O.P.TREBIEN; L.BORTOLON; M.J.TEDESCO; C.A.BISSANI; F.A.O.CAMARGO

    2011-01-01

    Disposal of chromium (Cr) hexavalent form, Cr(Ⅵ), in soils as additions in organic fertilizers, liming materials or plant nutrient sources can be dangerous since Cr(Ⅵ) can be highly toxic to plants, animals, and humans. In order to explore soil conditions that lead to Cr(Ⅵ) generation, this study were performed using a Paleudult (Dystic Nitosol) from a region that has a high concentration of tannery operations in the Rio Grande do Sul State, southern Brazil. Three laboratory incubation experiments were carried out to examine the influences of soil moisture content and concentration of cobalt and organic matter additions on soil Cr(Ⅵ) formation and release and manganese (Mn) oxide reduction with a salt of chromium chloride (CrCl3) and tannery sludge as inorganic and organic sources of Cr(Ⅲ), respectively. The amount of Cr(Ⅲ) oxidation depended on the concentration of easily reducible Mn oxides and the oxidation was more intense at the soil water contents in which Mn(Ⅲ/Ⅳ) oxides were more stable. Soluble organic compounds in soil decreased Cr(Ⅵ) formation due to Cr(Ⅲ) complexation. This mechanism also resulted in the decrease in the oxidation of Cr(Ⅲ) due to the tannery sludge additions. Chromium(Ⅲ) oxidation to Cr(Ⅵ) at the solid/solution interface involved the following mechanisms:the formation of a precursor complex on manganese (Mn) oxide surfaces, followed by electron transfer from Cr(Ⅲ) to Mn(Ⅲ or Ⅳ),the formation of a successor complex with Mn(Ⅱ) and Cr(Ⅵ), and the breakdown of the successor complex and release of Mn(Ⅱ) and Cr(Ⅵ) into the soil solution.

  7. Optical and structural properties of chromium impurities in niobium–gallium oxide

    International Nuclear Information System (INIS)

    In this work, the optical properties of the gallium–niobium oxide doped with chromium ions were investigated. The samples were obtained by wet chemical and solid-state methods, investigated by X-ray powder diffraction and the data were refined by Rietveld methods. The morphology was determined by scanning electron microscope (SEM) images. The photoluminescence, excitation and photoacoustic measurements showed broad and intense bands in the red region of the spectrum, associated with energy transitions of chromium ions in octahedral sites. From the optical spectra and using the crystal field theory, the energy parameters were obtained. - Highlights: • Cr3+ doped niobium–gallium oxides were prepared by solid state reaction and wet chemical method. • We show bands in red region. • Spectra are associated to Cr3+ ions in octahedral sites

  8. A fundamental study of chromium deposition on solid oxide fuel cell cathode materials

    Science.gov (United States)

    Tucker, Michael C.; Kurokawa, Hideto; Jacobson, Craig P.; De Jonghe, Lutgard C.; Visco, Steven J.

    Chromium contamination of metal oxides and SOFC cathode catalysts is studied in the range 700-1000 °C. Samples are exposed to a moist air atmosphere saturated with volatile Cr species in the presence and absence of direct contact between the sample and ferritic stainless steel powder. Chromium contamination of the samples is observed to occur via two separate pathways: surface diffusion from the stainless steel surface and vapor deposition from the atmosphere. Surface diffusion dominates in all cases. Surface diffusion is found to be a significant source of Cr contamination for LSM and LSCF at 700, 800, and 1000 °C. Vapor deposition of Cr onto LSCF was observed at each of these temperatures, but was not observed for LSM at 700 or 800 °C. Comparison of the behavior for LSM, LSCF, and single metal oxides suggests that Mn and Co, respectively, are responsible for the Cr contamination of these catalysts.

  9. Oxidative leaching of chromium from layered double hydroxides: Mechanistic studies

    Indian Academy of Sciences (India)

    A V Radha; P Vishnu Kamath

    2004-08-01

    The layered double hydroxide (LDH) of Zn with Cr on treatment with a hypochlorite solution releases chromate ions as a result of oxidative leaching by a dissolution–reprecipitation mechanism. The residue is found to be -Zn(OH)2. The LDH of Mg with Cr on the other hand is resistant to oxidative leaching. In contrast, a X-ray amorphous gel of the coprecipitated hydroxides of Mg and Cr yields chromate ions. These results suggest that the oxidation potential of Cr(III) in LDHs is determined by the nature of the divalent ion and the crystallinity of the phase while being unaffected by the nature of the intercalated anions.

  10. Effect Of Oxidation On Chromium Leaching And Redox Capacity Of Slag-Containing Waste Forms

    International Nuclear Information System (INIS)

    The rate of oxidation is important to the long-term performance of reducing salt waste forms because the solubility of some contaminants, e.g., technetium, is a function of oxidation state. TcO4- in the salt solution is reduced to Tc(IV) and has been shown to react with ingredients in the waste form to precipitate low solubility sulfide and/or oxide phases [Shuh, et al., 1994, Shuh, et al., 2000, Shuh, et al., 2003]. Upon exposure to oxygen, the compounds containing Tc(IV) oxidize to the pertechnetate ion, Tc(VII)O4-, which is very soluble. Consequently the rate of technetium oxidation front advancement into a monolith and the technetium leaching profile as a function of depth from an exposed surface are important to waste form performance and ground water concentration predictions. An approach for measuring contaminant oxidation rate (effective contaminant specific oxidation rate) based on leaching of select contaminants of concern is described in this report. In addition, the relationship between reduction capacity and contaminant oxidation is addressed. Chromate was used as a non-radioactive surrogate for pertechnetate in simulated waste form samples. Depth discrete subsamples were cut from material exposed to Savannah River Site (SRS) ''field cured'' conditions. The subsamples were prepared and analyzed for both reduction capacity and chromium leachability. Results from field-cured samples indicate that the depth at which leachable chromium was detected advanced further into the sample exposed for 302 days compared to the sample exposed to air for 118 days (at least 50 mm compared to at least 20 mm). Data for only two exposure time intervals is currently available. Data for additional exposure times are required to develop an equation for the oxidation front progression. Reduction capacity measurements (per the Angus-Glasser method, which is a measurement of the ability of a material to chemically reduce Ce(IV) to Ce(III) in solution) performed on depth

  11. Effect Of Oxidation On Chromium Leaching And Redox Capacity Of Slag-Containing Waste Forms

    Energy Technology Data Exchange (ETDEWEB)

    Almond, P. M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Stefanko, D. B. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Langton, C. A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2013-03-01

    The rate of oxidation is important to the long-term performance of reducing salt waste forms because the solubility of some contaminants, e.g., technetium, is a function of oxidation state. TcO4- in the salt solution is reduced to Tc(IV) and has been shown to react with ingredients in the waste form to precipitate low solubility sulfide and/or oxide phases [Shuh, et al., 1994, Shuh, et al., 2000, Shuh, et al., 2003]. Upon exposure to oxygen, the compounds containing Tc(IV) oxidize to the pertechnetate ion, Tc(VII)O4-, which is very soluble. Consequently the rate of technetium oxidation front advancement into a monolith and the technetium leaching profile as a function of depth from an exposed surface are important to waste form performance and ground water concentration predictions. An approach for measuring contaminant oxidation rate (effective contaminant specific oxidation rate) based on leaching of select contaminants of concern is described in this report. In addition, the relationship between reduction capacity and contaminant oxidation is addressed. Chromate was used as a non-radioactive surrogate for pertechnetate in simulated waste form samples. Depth discrete subsamples were cut from material exposed to Savannah River Site (SRS) field cured conditions. The subsamples were prepared and analyzed for both reduction capacity and chromium leachability. Results from field-cured samples indicate that the depth at which leachable chromium was detected advanced further into the sample exposed for 302 days compared to the sample exposed to air for 118 days (at least 50 mm compared to at least 20 mm). Data for only two exposure time intervals is currently available. Data for additional exposure times are required to develop an equation for the oxidation front progression. Reduction capacity measurements (per the Angus-Glasser method, which is a measurement of the ability of a material to chemically reduce Ce(IV) to Ce

  12. Identification of chromium oxides and other solids in BWR reactor water

    International Nuclear Information System (INIS)

    Radioactive solid particles in reactor water may deposit as hot spots on reactor component surfaces, contributing to plant radiation field build-up. Phase identification of these solid particles would improve our understanding about the origins of the 'hot spots' and their behaviour under various water chemistry conditions. Phase identification is also important for the purpose of experimental verification of some thermodynamic calculations that predict thermodynamic stability of certain solid phases in BWR water environments. This paper concerns a transmission electron microscopy study on solid particles that were collected from two Swedish BWRs operated with hydrogen water chemistry. In the samples collected from both reactors, a significant fraction of the total activities came from radionuclide Cr-51. Among various solid particles detected, a significant number of chromium oxide particles were found. From one reactor amorphous chromium oxide particles were detected while from another reactor crystalline Cr2O3 was found. The presence of the metastable amorphous chromium oxide in the coolant suggests that any assumption of achieving thermodynamic equilibrium in the coolant system would not be valid. (author)

  13. High temperature oxidation of chromium with nanometric ceria sol-gel coating

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Isothermal oxidation behavior of chromium with and without nanometric sol-gel CeO2 coating is studied at 1000℃ in air. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) are used to examine the surface morphology and microstructure of their oxide films. It is found that ceria coating greatly improves the anti-oxidation property of chromium. Laser Raman spectrometer and X-ray diffraction spectrometer (XRD) are also used to study the stress level in oxide films formed on ceria-coated and ceria-free Cr. The difference in oxidation behavior is mainly attributed to the fact that ceria greatly reduces the growth speed and grain size of Cr2O3 film, and this fine grain-sized Cr2O3 film probably has better high temperature plasticity, i.e. oxide film can relieve parts of compressive stress by means of creeping. XRD and Raman testing results both show the stress declination due to nano-CeO2 application, and their deviation is analyzed concerning to the rare earth effect.

  14. Photoconductivity, photoluminescence and optical Kerr nonlinear effects in zinc oxide films containing chromium nanoclusters

    Energy Technology Data Exchange (ETDEWEB)

    Torres-Torres, C., E-mail: crstorres@yahoo.com.mx [Seccion de Estudios de Posgrado e Investigacion, ESIME-Z, Instituto Politecnico Nacional, Mexico, DF 07738 (Mexico); Garcia-Cruz, M.L. [Centro de Investigacion en Dispositivos Semiconductores, Benemerita Universidad Autonoma de Puebla, A. P. J-48, Puebla 72570, Mexico (Mexico); Castaneda, L., E-mail: luisca@sirio.ifuap.buap.mx [Instituto de Fisica, Benemerita Universidad Autonoma de Puebla, A. P. J-48, Puebla 72570, Mexico (Mexico); Rangel Rojo, R. [CICESE/Depto. de Optica, A. P. 360, Ensenada, BC 22860 (Mexico); Tamayo-Rivera, L. [Instituto de Fisica, Universidad Nacional Autonoma de Mexico, Mexico, DF 01000 (Mexico); Maldonado, A. [Depto. de Ing. Electrica, CINVESTAV IPN-SEES, A. P. 14740, Mexico DF 07000 (Mexico); Avendano-Alejo, M., E-mail: imax_aa@yahoo.com.mx [Centro de Ciencias Aplicadas y Desarrollo Tecnologico, Universidad Nacional Autonoma de Mexico, A. P. 70-186, 04510, DF (Mexico); and others

    2012-04-15

    Chromium doped zinc oxide thin solid films were deposited on soda-lime glass substrates. The photoconductivity of the material and its influence on the optical behavior was evaluated. A non-alkoxide sol-gel synthesis approach was used for the preparation of the samples. An enhancement of the photoluminescence response exhibited by the resulting photoconductive films with embedded chromium nanoclusters is presented. The modification in the photoconduction induced by a 445 nm wavelength was measured and then associated with the participation of the optical absorptive response. In order to investigate the third order optical nonlinearities of the samples, a standard time-resolved Optical Kerr Gate configuration with 80 fs pulses at 830 nm was used and a quasi-instantaneous pure electronic nonlinearity without the contribution of nonlinear optical absorption was observed. We estimate that from the inclusion of Cr nanoclusters into the sample results a strong optical Kerr effect originated by quantum confinement. The large photoluminescence response and the important refractive nonlinearity of the photoconductive samples seem to promise potential applications for the development of multifunctional all-optical nanodevices. - Highlights: Black-Right-Pointing-Pointer Enhancement in photoluminescence for chromium doped zinc oxide films is presented. Black-Right-Pointing-Pointer A strong and ultrafast optical Kerr effect seems to result from quantum confinement. Black-Right-Pointing-Pointer Photoconductive properties for optical and optoelectronic functions were observed.

  15. Ten-Year Comparison of Oxidized Zirconium and Cobalt-Chromium Femoral Components in Total Knee Arthroplasty

    Science.gov (United States)

    Roe, Justin; Vioreanu, Mihai; Salmon, Lucy; Waller, Alison; Pinczewski, Leo

    2016-01-01

    Objective: The purpose of this study was to determine if oxidized zirconium femoral components had better outcomes than cobalt-chromium in vivo at medium and long term and if the use of oxidized zirconium components had clinical adverse effects. Methods: Forty consecutive patients (eighty knees) underwent simultaneous bilateral cruciate-retaining total knee arthroplasty for primary osteoarthritis from January 2002 to December 2003. For each patient, the knees were randomized to receive the oxidized zirconium femoral component, with the contralateral knee receiving the cobalt-chromium component. Outcome measures included the Western Ontario and McMaster Universities Osteoarthritis Index, Knee Injury and Osteoarthritis Outcome Score, Knee Society score, and British Orthopaedic Association patient satisfaction scale. Radiographic outcomes include the Knee Society total knee arthroplasty roentgenographic evaluation and scoring system and measurement of radiographic wear. Patients and assessors were blinded to the treatment groups and results. Results: There were no significant differences in clinical, subjective, and radiographic outcomes between the two implants at ten years postoperatively. Ten years following surgery, 36% of the patients preferred the cobalt-chromium knee compared with 11% who preferred the oxidized zirconium knee (p = 0.02) and 53% had no preference. Conclusions: Ten-year outcomes after total knee arthroplasty with oxidized zirconium and cobalt-chromium femoral components showed no significant differences in clinical, subjective, and radiographic outcomes. Patients had no preference or preferred the cobalt chromium prosthesis to the oxidized zirconium prosthesis. There were no adverse effects associated with the use of oxidized zirconium femoral implants.

  16. Dehydrogenation of propane in the presence of carbon dioxide over chromium and gallium oxides catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Lapidus, A.L.; Agafonov, Yu.A.; Gaidai, N.A.; Nekrasov, N.V.; Menshova, M.V.; Kunusova, R.M. [Russian Academy of Sciences, Moscow (Russian Federation). N.D. Zelinsky Inst. of Organic Chemistry

    2011-07-01

    Effective chromium and gallium oxides supported catalysts were prepared and tested in longduration experiments for propane dehydrogenation in the presence of CO{sub 2}. The optimal concentrations of active metals were found. It was shown that the activity, selectivity and stability of chromium oxides catalysts were higher than these parameters for gallium ones. Mechanism of propane oxidative dehydrogenation was studied over both catalysts using unstationary and spectroscopic methods. The employment of these methods allowed to establish the differences in process mechanism. It was shown that surface hydroxides took participation in propene formation over Cr-catalysts and hydrides - over Ga-ones. Propane and carbon dioxide participated in the reaction from the adsorbed state over both catalysts but they were differed by the adsorption capacity of the reaction components: CO2 was tied more firmly than C{sub 3}H{sub 6} over both catalysts, CO{sub 2} and C{sub 3}H{sub 6} were tied more strongly with Cr-catalysts than with Ga-ones. It was shown that CO{sub 2} took active participation in reverse watergas shift reaction and in oxidation of catalyst surface over chromium oxides catalysts. The main role of CO{sub 2} in propane dehydrogenation over gallium catalysts consisted in a decrease of coke formation. Step-schemes of propene and cracking products formation were proposed on the basis of literature and obtained data: via the redox mechanism over Cr-catalysts and through a heterolytic dissociation reaction pathway over Ga-ones. (orig.)

  17. Multivariate modeling of chromium-induced oxidative stress and biochemical changes in plants of Pistia stratiotes L.

    OpenAIRE

    Sinha, Sarita; Basant, Ankita; Malik, Amrita; Singh, Kunwar P.

    2009-01-01

    Biochemical changes in the plants of Pistia stratiotes L., a free floating macrophyte exposed to different concentrations of hexavalent chromium (0, 10, 40, 60, 80 and 160 μM) for 48, 96 and 144 h were studied. Chromium-induced oxidative stress in macrophyte was investigated using the multivariate modeling approaches. Cluster analysis rendered two fairly distinct clusters (roots and shoots) of similar characteristics in terms of their biochemical responses. Discriminant analysis identified as...

  18. Removal of trivalent chromium from aqueous solution using aluminum oxide hydroxide.

    Science.gov (United States)

    Bedemo, Agaje; Chandravanshi, Bhagwan Singh; Zewge, Feleke

    2016-01-01

    Water is second most essential for human being. Contamination of water makes it unsuitable for human consumption. Chromium ion is released to water bodies from various industries having high toxicity which affects the biota life in these waters. In this study aluminum oxide hydroxide was tested for its efficiency to remove trivalent chromium from aqueous solutions through batch mode experiments. Chromium concentrations in aqueous solutions and tannery waste water before and after adsorption experiments were determined using flame atomic absorption spectrometry. The effects of pH, contact time, initial concentration and adsorbent dosage on the adsorption of Cr(III) were studied. The study revealed that more than 99 % removal of Cr(III) was achieved over wide range of initial pH (3-10). The optimum conditions for the removal of Cr(III) were found to be at pH 4-6 with 40 g/L adsorbent dose at 60 min of contact time. The adsorption capacity was assessed using Langmuir and Freundlich isotherms. The equilibrium data at varying adsorbent dose obeyed the two isotherms. The adsorbent was found to be efficient for the removal of Cr(III) from tannery waste effluent. PMID:27547663

  19. Chromium and Ruthenium-Doped Zinc Oxide Thin Films for Propane Sensing Applications

    Directory of Open Access Journals (Sweden)

    Maximino Avendaño-Alejo

    2013-03-01

    Full Text Available Chromium and ruthenium-doped zinc oxide (ZnO:Cr and (ZnO:Ru thin solid films were deposited on soda-lime glass substrates by the sol-gel dip-coating method. A 0.6 M solution of zinc acetate dihydrate dissolved in 2-methoxyethanol and monoethanolamine was used as basic solution. Chromium (III acetylacetonate and Ruthenium (III trichloride were used as doping sources. The Ru incorporation and its distribution profile into the films were proved by the SIMS technique. The morphology and structure of the films were studied by SEM microscopy and X-ray diffraction measurements, respectively. The SEM images show porous surfaces covered by small grains with different grain size, depending on the doping element, and the immersions number into the doping solutions. The sensing properties of ZnO:Cr and ZnO:Ru films in a propane (C3H8 atmosphere, as a function of the immersions number in the doping solution, have been studied in the present work. The highest sensitivity values were obtained for films doped from five immersions, 5.8 and 900, for ZnO:Cr and ZnO:Ru films, respectively. In order to evidence the catalytic effect of the chromium (Cr and ruthenium (Ru, the sensing characteristics of undoped ZnO films are reported as well.

  20. Characterization of Physical, Thermal and Structural Properties of Chromium (VI) Oxide Powder: Impact of Biofield Treatment

    OpenAIRE

    Trivedi, Mahendra; Branton, Alice; Trivedi, Dahryn; Nayak, Gopal

    2015-01-01

    Chromium (VI) oxide (CrO3) has gained extensive attention due to its versatile physical and chemical properties. The objective of the present study was to evaluate the impact of biofield treatment on physical, thermal and structural properties of CrO3 powder. In this study, CrO3 powder was divided into two parts i.e. control and treatment. Control part was remained as untreated and treated part received Mr. Trivedi’s biofield treatment. Subsequently, control and treated CrO3 samples were char...

  1. XANES determination of chromium oxidation states in glasses: comparison with optical absorption spectroscopy

    OpenAIRE

    Villain, Olivier; Calas, Georges; Galoisy, Laurence; Cormier, Laurent; Hazemann, Jean-Louis

    2007-01-01

    The oxidation state of chromium in glasses melted in an air atmosphere with and without refining agents was investigated by Cr K-edge X-ray Absorption Near-Edge Structure (XANES) and optical absorption spectroscopy. A good agreement in the relative proportion of Cr(III) and Cr(VI) is obtained between both methods. We show that the chemical dependence of the absorption coefficient of Cr(III) is less important in XANES than in optical absorption spectroscopy. The comparison of glasses melted un...

  2. Lysozyme adsorption on the colloidal chromium(III) oxide surface: Its impact on the system stability

    International Nuclear Information System (INIS)

    Highlights: • Lysozyme adsorption mechanism on the chromium(III) oxide surface was determined. • Surface charge density as well as zeta potential of Cr2O3 particles were measured. • Turbidimetric method was used to estimate the suspension stability. • Depending on the pH value, lysozyme increases or decreases the system stability. - Abstract: This paper describes the lysozyme (LSZ) presence effect on the chromium(III) oxide (Cr2O3) suspension stability. First, the electrokinetic properties of the examined system, i.e. surface charge density and zeta potential of solid particles in the absence and presence of LSZ, were determined. The lysozyme addition reduces the metal oxide surface charge, which may be related to the interaction of the LSZ protonated amino groups with the adsorbent surface moieties. The LSZ macromolecules undergo adsorption on the Cr2O3 surface only under electrostatic attraction. At the LSZ concentrations above 50 ppm the macromolecules cover completely the particle surface, which is evidenced by the observed zeta potential values. The LSZ influence on the Cr2O3 suspension stability depends on the solution pH value. At pH 3, 4.6 and 7.6, the LSZ addition improves the system stability. In turn, at pH 9 it is associated with the slight suspension destabilization

  3. Microstructural characterisation of chromium slags

    OpenAIRE

    Burja, J.; F. Tehovnik; Vode, F.; Arh, B.

    2015-01-01

    In this chromium slags that form during melting of chromium alloyed steels are examined. During melting and oxidation of these steel grades a considerable amount of chromium is lost, and gained back with slag reduction. Laboratory experiments were performed to study the mechanism of chromium oxide reduction by silicon. Slags chemistry and phase composition have a strong effect on the steelmaking process. Phase analysis revealed two types of chromium oxides, calcium chromites and chromite spin...

  4. Conversion of Chromium(III) Propionate to Chromate/dichromate(VI) by the Advanced Oxidation Process. Pretreatment of a Biomimetic Complex for Metal Analysis

    OpenAIRE

    Lynn Rodman, D.; Carrington, Nathan A.; Xue, Zi-Ling

    2006-01-01

    The use of H2O2 and UV irradiation to remove organic ligands in a chromium(III) complex for the subsequent chromium analysis is reported. The Advanced Oxidation Process (AOP) using a 5.5-W UV lamp, H2O2 and Fe2+/Fe3+ as catalyst (photo Fenton process) was found to give complete and quantitative Cr(III) → Cr(VI) conversion and removal of ligands in chromium(III) propionate [Cr3O(O2CCH2CH3)6(H2O)3]NO3, a biomimetic chromium species, as subsequent chromium analyses by the 1,5-diphenylcarbazide m...

  5. The temperature influence on sorption of microquantities of cobalt(II), chromium(III) and gallium(III) from aqueous solutions by iron oxide (III)

    International Nuclear Information System (INIS)

    Present article is devoted to temperature influence on sorption of microquantities of cobalt(II), chromium(III) and gallium(III) from aqueous solutions by iron oxide (III). The sorption of cobalt(II), chromium(III) and gallium(III) by iron oxide (III) at a wide temperature ranges and under mononuclear hydrolysis conditions was studied.

  6. Amorphous iron–chromium oxide nanoparticles with long-term stability

    Energy Technology Data Exchange (ETDEWEB)

    Iacob, Mihail [“Petru Poni” Institute of Macromolecular Chemistry, Iasi 700487 (Romania); Institute of Chemistry of ASM, Academiei str. 3, Chisinau 2028, Republic of Moldova (Moldova, Republic of); Cazacu, Maria, E-mail: mcazacu@icmpp.ro [“Petru Poni” Institute of Macromolecular Chemistry, Iasi 700487 (Romania); Turta, Constantin [Institute of Chemistry of ASM, Academiei str. 3, Chisinau 2028, Republic of Moldova (Moldova, Republic of); Doroftei, Florica [“Petru Poni” Institute of Macromolecular Chemistry, Iasi 700487 (Romania); Botko, Martin; Čižmár, Erik; Zeleňáková, Adriana; Feher, Alexander [Institute of Physics, Faculty of Science, P.J. Šafárik University, Park Angelinum 9, SK-04154 Košice (Slovakia)

    2015-05-15

    Highlights: • Fe–Cr oxide nanoparticles with pre-established metals ratio were obtained. • The amorphous state and its long-term stability were highlighted by X-ray diffraction. • The average diameter of dried nanoparticles was 3.5 nm, as was estimated by TEM, AFM. • In hexane dispersion, nanoparticles with diameter in the range 2.33–4.85 nm were found. • Superparamagnetic state of NPs co-exists with diamagnetism of the organic layer. - Abstract: Iron–chromium nanoparticles (NPs) were obtained through the thermal decomposition of μ{sub 3}-oxo heterotrinuclear (FeCr{sub 2}O) acetate in the presence of sunflower oil and dodecylamine (DA) as surfactants. The average diameter of the NPs was 3.5 nm, as estimated on the basis of transmission electron microscopy and atomic force microscopy images. Both techniques revealed the formation of roughly approximated spheres with some irregularities and agglomerations in larger spherical assemblies of 50–100 nm. In hexane, NPs with diameters in the 2.33–4.85 nm range are individually dispersed, as emphasized by dynamic light scattering measurements. The amorphous nature of the product was emphasized by X-ray powder diffraction. The study of the magnetic properties shows the presence of superparamagnetic state of iron–chromium oxide NPs and the diamagnetic contribution from DA layer forming a shell of NPs.

  7. Amorphous iron–chromium oxide nanoparticles with long-term stability

    International Nuclear Information System (INIS)

    Highlights: • Fe–Cr oxide nanoparticles with pre-established metals ratio were obtained. • The amorphous state and its long-term stability were highlighted by X-ray diffraction. • The average diameter of dried nanoparticles was 3.5 nm, as was estimated by TEM, AFM. • In hexane dispersion, nanoparticles with diameter in the range 2.33–4.85 nm were found. • Superparamagnetic state of NPs co-exists with diamagnetism of the organic layer. - Abstract: Iron–chromium nanoparticles (NPs) were obtained through the thermal decomposition of μ3-oxo heterotrinuclear (FeCr2O) acetate in the presence of sunflower oil and dodecylamine (DA) as surfactants. The average diameter of the NPs was 3.5 nm, as estimated on the basis of transmission electron microscopy and atomic force microscopy images. Both techniques revealed the formation of roughly approximated spheres with some irregularities and agglomerations in larger spherical assemblies of 50–100 nm. In hexane, NPs with diameters in the 2.33–4.85 nm range are individually dispersed, as emphasized by dynamic light scattering measurements. The amorphous nature of the product was emphasized by X-ray powder diffraction. The study of the magnetic properties shows the presence of superparamagnetic state of iron–chromium oxide NPs and the diamagnetic contribution from DA layer forming a shell of NPs

  8. The role of intergranular chromium carbides on intergranular oxidation of nickel based alloys in pressurized water reactors primary water

    Science.gov (United States)

    Gaslain, F. O. M.; Le, H. T.; Duhamel, C.; Guerre, C.; Laghoutaris, P.

    2016-02-01

    Alloy 600 is used in pressurized water reactors (PWRs) but is susceptible to primary water stress corrosion cracking (PWSCC). Intergranular chromium carbides have been found beneficial to reduce PWSCC. Focussed ion beam coupled with scanning electron microscopy (FIB/SEM) 3D tomography has been used to reconstruct the morphology of grain boundary oxide penetrations and their interaction with intergranular Cr carbides in Alloy 600 subjected to a PWR environment. In presence of intergranular Cr carbides, the intergranular oxide penetrations are less deep but larger than without carbide. However, the intergranular oxide volumes normalized by the grain boundary length for both samples are similar, which suggest that intergranular oxidation growth rate is not affected by carbides. Analytical transmission electron microscopy (TEM) shows that the intergranular oxide consists mainly in a spinel-type oxide containing nickel and chromium, except in the vicinity of Cr carbides where Cr2O3 was evidenced. The formation of chromium oxide may explain the lower intergranular oxide depth observed in grain boundaries containing Cr carbides.

  9. Chromium poisoning in (La,Sr)MnO3 cathode: Three-dimensional simulation of a solid oxide fuel cell

    Science.gov (United States)

    Miyoshi, Kota; Iwai, Hiroshi; Kishimoto, Masashi; Saito, Motohiro; Yoshida, Hideo

    2016-09-01

    A three-dimensional numerical model of a single solid oxide fuel cell (SOFC) considering chromium poisoning on the cathode side has been developed to investigate the evolution of the SOFC performance over long-term operation. The degradation model applied in the simulation describes the loss of the cathode electrochemical activity as a decrease in the active triple-phase boundary (TPB) length. The calculations are conducted for two types of cell: lanthanum strontium manganite (LSM)/yttria-stabilized zirconia (YSZ)/Ni-YSZ and LSM-YSZ/YSZ/Ni-YSZ. Their electrode microstructures are acquired by imaging with a focused ion beam scanning-electron microscope (FIB-SEM). The simulation results qualitatively reproduce the trends of chromium poisoning reported in the literature. It has been revealed that the performance degradation by chromium is primarily due to an increase in the cathode activation overpotential. In addition, in the LSM-YSZ composite cathode, TPBs in the vicinity of the cathode-electrolyte interface preferentially deteriorate, shifting the active reaction site towards the cathode surface. This also results in an increase in the cathode ohmic loss associated with oxide ion conduction through the YSZ phase. The effects of the cell temperature, the partial pressure of steam at the chromium source, the cathode microstructure, and the cathode thickness on chromium poisoning are also discussed.

  10. Oxidative stress-related lung dysfunction by chromium(VI): alleviation by Citrus aurantium L.

    Science.gov (United States)

    Soudani, Nejla; Rafrafi, Moez; Ben Amara, Ibtissem; Hakim, Ahmed; Troudi, Afef; Zeghal, Khaled Mounir; Ben Salah, Hichem; Boudawara, Tahia; Zeghal, Najiba

    2013-06-01

    Chromium(VI), a very strong oxidant, causes high cytotoxicity through oxidative stress in tissue systems. Our study investigated the potential ability of ethanolic Citrus aurantium L., family Rutaceae extract, used as a nutritional supplement, to alleviate lung oxidative damage induced by Cr(VI). A high-performance liquid chromatography coupled with a mass spectrometer method was developed to separate and identify flavonoids in C. aurantium L. Six flavonoids were identified, as (1) poncirin, (2) naringin, (3) naringenin, (4) quercetin, (5) isosinensetin, and (6) tetramethyl-o-isoscutellarein. Adult Wistar rats, used in this study, were divided into six groups of six animals each: group I served as controls which received standard diet, group II received via drinking water K2Cr2O7 alone (700 ppm), groups III and IV were pretreated for 10 days with ethanol extract of C. aurantium L. at doses of 100 and 300 mg/kg body weight/day, respectively, and then K2Cr2O7 was administrated during 3 weeks, and groups V and VI received during 10 days only C. aurantium L. ethanol extract at doses of 100 and 300 mg/kg/day, respectively. Ethanol extract of C. aurantium L. was administered orally. Rats exposed to Cr(VI) showed in lung an increase in malondialdehyde and protein carbonyl levels and a decrease in sulflydryl content, glutathione, nonprotein thiol, and vitamins C and E levels. Decreases in enzyme activities such as in Na(+)K(+) ATPase, catalase, glutathione peroxidase, and superoxide dismutase were noted. Pretreatment with C. aurantium L. of chromium-treated rats ameliorated all biochemical parameters. Lung histological studies confirmed the biochemical parameters and the beneficial role of C. aurantium L. PMID:22972417

  11. Effect of process parameters on surface oxides on chromium-alloyed steel powder during sintering

    International Nuclear Information System (INIS)

    The use of chromium in the PM steel industry today puts high demands on the choice and control of the atmosphere during the sintering process due to its high affinity to oxygen. Particular attention is required in order to control the surface chemistry of the powder which in turn is the key factor for the successful sintering and production of PM parts. Different atmosphere compositions, heating rates and green densities were employed while performing sintering trials on water atomized steel powder pre-alloyed with 3 wt.% Cr in order to evaluate the effect on surface chemical reactions. Fracture surfaces of sintered samples were examined using high resolution scanning electron microscopy combined with X-ray microanalysis. The investigation was complemented with thermogravimetric (TG) studies. Reaction products in particulate form containing strong-oxide forming elements such as Cr, Si and Mn were formed during sintering for all conditions. Processing in vacuum results in intensive inter-particle neck development during the heating stage and consequently in the excessive enclosure of surface oxide which is reflected in less good final mechanical properties. Enhanced oxide reduction was observed in samples processed in hydrogen-containing atmospheres independent of the actual content in the range of 3–10 vol.%. An optimum heating rate was required for balancing reduction/oxidation processes. A simple model for the enclosure and growth of oxide inclusions during the sinter-neck development is proposed. The obtained results show that significant reduction of the oxygen content can be achieved by adjusting the atmosphere purity/composition. - Highlights: ► A local atmosphere microclimate is very important for sintering of PM steels. ► High risk of surface oxide enclosure between 800 and 1000 °C. ► Coalescence and agglomeration of enclosed oxides take place during sintering. ► The effect of different process parameters on the oxide reduction is examined. ► A

  12. Role of Iron Anode Oxidation on Transformation of Chromium by Electrolysis.

    Science.gov (United States)

    Sarahney, Hussam; Mao, Xuhui; Alshawabkeh, Akram N

    2012-12-30

    The potential for chemical reduction of hexavalent chromium Cr(VI) in contaminated water and formation of a stable precipitate by Zero Valent Iron (ZVI) anode electrolysis is evaluated in separated electrodes system. Oxidation of iron electrodes produces ferrous ions causing the development of a reducing environment in the anolyte, chemical reduction of Cr(VI) to Cr(III) and formation of stable iron-chromium precipitates. Cr(VI) transformation rates are dependent on the applied electric current density. Increasing the electric current increases the transformation rates; however, the process is more efficient under lower volumetric current density (for example 1.5 mA L(-1) in this study). The transformation follows a zero order rate that is dependent on the electric current density. Cr(VI) transformation occurs in the anolyte when the electrodes are separated as well as when the electrolytes (anolyte/catholyte) are mixed, as used in electrocoagulation. The study shows that the transformation occurs in the anolyte as a result of ferrous ion formation and the product is a stable Fe(15)Cr(5)(OH)(60) precipitate. PMID:23284182

  13. Computer Simulation and Experimental Validation on the Oxidation and Sulfate Corrosion Resistance of Novel Chromium Based High Temperature Alloys

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Shizhong

    2013-02-28

    This report summarizes our recent works of ab initio molecular dynamics inter-atomic potentials development on dilute rare earth element yttrium (Y) etc. doped chromium (Cr) alloy systems, its applications in oxidation and corrosion resistance simulation, and experiment validation on the candidate systems. The simulation methods, experimental validation techniques, achievements already reached, students training, and future improvement are briefly introduced.

  14. Chemical Insight into the Adsorption of Chromium(III) on Iron Oxide/Mesoporous Silica Nanocomposites.

    Science.gov (United States)

    Egodawatte, Shani; Datt, Ashish; Burns, Eric A; Larsen, Sarah C

    2015-07-14

    Magnetic iron oxide/mesoporous silica nanocomposites consisting of iron oxide nanoparticles embedded within mesoporous silica (MCM-41) and modified with aminopropyl functional groups were prepared for application to Cr(III) adsorption followed by magnetic recovery of the nanocomposite materials from aqueous solution. The composite materials were extensively characterized using physicochemical techniques, such as powder X-ray diffraction, thermogravimetric and elemental analysis, nitrogen adsorption, and zeta potential measurements. For aqueous Cr(III) at pH 5.4, the iron oxide/mesoporous silica nanocomposite exhibited a superior equilibrium adsorption capacity of 0.71 mmol/g, relative to 0.17 mmol/g for unmodified mesoporous silica. The aminopropyl-functionalized iron oxide/mesoporous silica nanocomposites displayed an equilibrium adsorption capacity of 2.08 mmol/g, the highest adsorption capacity for Cr(III) of all the materials evaluated in this study. Energy-dispersive spectroscopy (EDS) with transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) experiments provided insight into the chemical nature of the adsorbed chromium species. PMID:26134074

  15. Structure, electronic and magnetic properties of Ca-doped chromium oxide studied by the DFT method

    Energy Technology Data Exchange (ETDEWEB)

    Maldonado, Frank; Rivera, Richard [Grupo de Fisicoquimica de Materiales, Universidad Tecnica Particular de Loja, Apartado 11-01-608, Loja (Ecuador); Stashans, Arvids, E-mail: arvids@utpl.edu.ec [Grupo de Fisicoquimica de Materiales, Universidad Tecnica Particular de Loja, Apartado 11-01-608, Loja (Ecuador)

    2012-04-15

    Using first-principles density functional theory calculations within the generalised gradient approximation (GGA) as well as GGA+U method we study Ca-doped {alpha}-Cr{sub 2}O{sub 3} crystal. Structural, electronic and magnetic properties due to the singular impurity incorporation have been investigated and discussed in detail. Atomic shifts as well as computed Bader charges on atoms imply the importance of ionic nature in the atomic interactions in chromium oxide. The study improves our knowledge on how the crystalline lattice reacts on the presence of a Ca dopant. According to our research it is found that Ca impurity incorporation produces some local changes upon the electronic band structure of the material without occurrence of local states within the band-gap. It is found that Ca incorporation produces change in magnetic behaviour of the crystal: it becomes ferromagnetic.

  16. On interaction of vapo ous polonjum dioxide with iron, chromium and tunsten oxides

    International Nuclear Information System (INIS)

    Using the thermal method of direct synthesis in the oxygen medium it is established, that vaporous polonium dioxide does not react with 1.5 iron and chromium oxides in the temperature range 800-1050 deg C. Tungsten trioxide reacts with polonium dioxide vapour at 880-920 deg C with the forming of the PoO2 x WO3 compound, which dissolves polonium dioxide vapors at 920-950 deg C. The temperature dependence of the PoO2 x WO3 vapor pressure in the oxygen medium at 788-900 deg C is expressed with equation, vaporisation heat 75.7 +- 0.3 kcal-mol. At the temperatures higher than 750 deg C in the vacuum PoO2 x WO3 is the thermally unstable compound

  17. Corrosion, ion release and Mott–Schottky probe of chromium oxide coatings in saline solution with potential for orthopaedic implant applications

    Science.gov (United States)

    Ogwu, A. A.; Oje, A. M.; Kavanagh, J.

    2016-04-01

    We report our investigation on chromium oxide thin film coatings that show a negligible ion release during electrochemical corrosion testing in saline solution. The chemical constituents of the films prepared by reactive magnetron sputtering were identified to be predominantly Cr2O3 based on Raman spectroscopy anti-symmetric stretching vibration modes for CrIII–O and other peaks and an FTIR spectroscopy E u vibrational mode at 409 cm‑1. X-ray photoelectron spectroscopy, multiplet fitting for 2P 3/2 and 2P 1/2 states also confirmed the predominantly Cr2O3 stoichiometry in the films. The prepared chromium oxide coatings showed superior pitting corrosion resistance compared to the native chromium oxide films on bare uncoated stainless steel when tested under open circuit potential, potentiodynamic polarisation and cyclic voltammetry in saline solution. The chromium ion released into solution during the corrosion testing of stainless steel substrates coated with chromium oxide coatings was found to be negligibly small based on atomic absorption spectroscopy measurements. Our Mott–Schottky analysis investigation showed that the negligibly small ion release from the chromium oxide coated steel substrates is most likely due to a much lower defect density on the surface of the deposited coatings compared to the native oxide layer on the uncoated steel substrates. This opens up the opportunity for using chromium oxide surface coatings in hip, knee and other orthopaedic implants where possible metal ion release in vivo still poses a great challenge.

  18. The oxidative stress response of the filamentous yeast Trichosporon cutaneum R57 to copper, cadmium and chromium exposure

    OpenAIRE

    Lazarova, Nevena; Krumova, Ekaterina; Stefanova, Tsvetanka; Georgieva, Nelly; Angelova, Maria

    2014-01-01

    Despite the intensive research in the past decade on the microbial bioaccumulation of heavy metals, the significance of redox state for oxidative stress induction is not completely clarified. In the present study, we examined the effect of redox-active (copper and chromium) and redox-inactive (cadmium) metals on the changes in levels of oxidative stress biomarkers and antioxidant enzyme defence in Trichosporon cutaneum R57 cells. This filamentous yeast strain showed significant tolerance and ...

  19. Chromium-doped silica optical fibres : influence of the core composition on the Cr oxidation states and crystal field

    CERN Document Server

    Felice, Valérie; Jones, Julian K; Monnom, Gérard; Ostrowsky, Daniel B

    2013-01-01

    We have made chromium-doped, silica-based preforms and optical fibres by Modified Chemical Vapour Deposition and have studied the influence of the chemical composition of the doped region on the Cr-oxidation states and the spectroscopic properties of the samples. Chromium, introduced initially as Cr3+, is partially or totally oxidized during the fabrication process, and is stabilized in the core of the preforms and fibres as Cr3+ in octahedral coordination, and/or as Cr4+ in distorded tetrahedral coordination (Cs). Small concentrations (~1-2 mol%) of codopants in silica, such as germanium or aluminium, suffice to promote a particular oxidation state. Particularly, 1 mol % of aluminium stabilizes all present chromium into Cr4+. The ligand field parameters, Dq, B and Dq/B, for Cr3+ and Cr4+ are derived. It is shown that the chromium ions in our samples are in low to intermediate ligand field and that Dq and Dq/B decrease when the aluminium content increases. The absorption cross sections of Cr3+ are similar to ...

  20. Preparation of porous chromium oxide nanotubes using carbon nanotubes as templates and their application as an ethanol sensor

    International Nuclear Information System (INIS)

    Chromium oxide nanotubes were successfully prepared using multi-walled carbon nanotubes (MWCNTs) as a template via a supercritical fluid-mediated route. In this method, with chromium (III) nitrate nonahydrate as precursor, chromium oxide was first deposited on MWCNTs in supercritical ethanol in the presence of NH4HCO3. The as-prepared chromium oxide/MWCNT nanocomposites were characterized by transmission electron microscopy, x-ray diffraction, infrared spectroscopy and thermogravimetric analysis. It was demonstrated that the MWCNTs were coated with a layer of amorphous Cr2O3·xH2O. The thickness of the Cr2O3·xH2O sheath on MWCNTs could be tuned by manipulating the ratio of precursor to MWCNTs. Calcining the composites at 550 deg. C, the MWCNTs were removed, producing polycrystalline α-Cr2O3 nanotubes. The as-prepared α-Cr2O3 sample was used as a sensor material to detect ethanol vapor, and it was demonstrated that the α-Cr2O3 nanotubes exhibited good performance even at 400 deg. C

  1. Mobility of chromium in inorganic oxides, Spectroscopic fingerprinting of oxidation states and coordination environments

    NARCIS (Netherlands)

    Weckhuysen, B.M.; Schoofs, B.; Schoonheydt, R.A.

    1997-01-01

    The mobility of Crn+ in inorganic oxides has been investigated by combined diffuse reflectance (DR)-EPR spectroscopies as a function of the Cr oxidation state, the type of inorganic oxide (silica, alumina and mordenite) and the environmental conditions (hydrated and dehydrated state). Crn+ ions are

  2. Removal of hexavalent chromium in carbonic acid solution by oxidizing slag discharged from steelmaking process in electric arc furnace

    Science.gov (United States)

    Yokoyama, Seiji; Okazaki, Kohei; Sasano, Junji; Izaki, Masanobu

    2014-02-01

    Hexavalent chromium (Cr(VI)) is well-known to be a strong oxidizer, and is recognized as a carcinogen. Therefore, it is regulated for drinking water, soil, groundwater and sea by the environmental quality standards all over the world. In this study, it was attempted to remove Cr(VI) ion in a carbonic acid solution by the oxidizing slag that was discharged from the normal steelmaking process in an electric arc furnace. After the addition of the slag into the aqueous solution contained Cr(VI) ion, concentrations of Cr(VI) ion and total chromium (Cr(VI) + trivalent chromium (Cr(III)) ions decreased to lower detection limit of them. Therefore, the used slag could reduce Cr(VI) and fix Cr(III) ion on the slag. While Cr(VI) ion existed in the solution, iron did not dissolve from the slag. From the relation between predicted dissolution amount of iron(II) ion and amount of decrease in Cr(VI) ion, the Cr(VI) ion did not react with iron(II) ion dissolved from the slag. Therefore, Cr(VI) ion was removed by the reductive reaction between Cr(VI) ion and the iron(II) oxide (FeO) in the slag. This reaction progressed on the newly appeared surface of iron(II) oxide due to the dissolution of phase composed of calcium etc., which existed around iron(II) oxide grain in the slag.

  3. Mobility of chromium in inorganic oxides, Spectroscopic fingerprinting of oxidation states and coordination environments

    OpenAIRE

    Weckhuysen, B. M.; Schoofs, B.; Schoonheydt, R.A.

    1997-01-01

    The mobility of Crn+ in inorganic oxides has been investigated by combined diffuse reflectance (DR)-EPR spectroscopies as a function of the Cr oxidation state, the type of inorganic oxide (silica, alumina and mordenite) and the environmental conditions (hydrated and dehydrated state). Crn+ ions are mobile under hydrated and dehydrated conditions and Crn+ preferentially migrates from silica to alumina and, to a lesser extent, to mordenite, although only a small amount of migration of Crn+ is o...

  4. Mechanistic investigation of toxicity of chromium oxide nanoparticles in murine fibrosarcoma cells

    Directory of Open Access Journals (Sweden)

    Alarifi S

    2016-03-01

    Full Text Available Saud Alarifi, Daoud Ali, Saad Alkahtani Department of Zoology, College of Science, King Saud University, Riyadh, Saudi Arabia Abstract: Chromium oxide nanoparticles (Cr2O3NPs are widely used in polymers and paints. In the present study, we aimed to determine the toxicity of Cr2O3NPs in murine fibrosarcoma (L929 cells. The cytotoxicity of Cr2O3NPs was measured by MTT and neutral red uptake assays; Cr2O3NPs had significant cytotoxic effects on L929 cells. Enhancement of intracellular reactive oxygen species was observed in L929 cells after exposure to Cr2O3NPs. Cr2O3NPs produced caspase-3, indicating that exposure to Cr2O3NPs induced apoptosis. After exposure to Cr2O3NPs, the cellular glutathione level decreased and lipid peroxidation, superoxide dismutase, and catalase increased in a dose- and time-dependent manner. By using single-cell gel tests, we also observed increased DNA damage in a Cr2O3NP exposure-duration- and dose-dependent fashion. Cell toxicity and DNA damage may be useful biomarkers for determining the safety of Cr2O3NPs in human and animal health. Keywords: Cr2O3NPs, L929 cells, MTT assay, oxidative stress 

  5. Chromium vaporization from mechanically deformed pre-coated interconnects in Solid Oxide Fuel Cells

    Science.gov (United States)

    Falk-Windisch, Hannes; Sattari, Mohammad; Svensson, Jan-Erik; Froitzheim, Jan

    2015-11-01

    Cathode poisoning, associated with Cr evaporation from interconnect material, is one of the most important degradation mechanisms in Solid Oxide Fuel Cells when Cr2O3-forming steels are used as the interconnect material. Coating these steels with a thin Co layer has proven to decrease Cr vaporization. To reduce production costs, it is suggested that thin metallic PVD coatings be applied to each steel strip before pressing the material into interconnect shape. This process would enable high volume production without the need for an extra post-coating step. However, when the pre-coated material is mechanically deformed, cracks may form and lower the quality of the coating. In the present study, Chromium volatilization is measured in an air-3% H2O environment at 850 °C for 336 h. Three materials coated with 600 nm Co are investigated and compared to an uncoated material. The effect of deformation is investigated on real interconnects. Microscopy observations reveal the presence of cracks in the order of several μm on the deformed pre-coated steel. However, upon exposure, the cracks can heal and form a continuous surface oxide rich in Co and Mn. As an effect of the rapid healing, no increase in Cr vaporization is measured for the pre-coated material.

  6. Oxidative alkaline dissolution of chromium from Hanford tank sludges: Results of FY 98 studies

    Energy Technology Data Exchange (ETDEWEB)

    Rapko, B.M.

    1998-08-01

    Plans for disposing of the high-level radioactive wastes at the Hanford Site call for retrieving, pretreating, and finally immobilizing the wastes in a glass matrix. Since the cost for vitrifying and disposing of high-level wastes will be very great, pretreatment processes are being developed to reduce their volume. The baseline method for pretreating Hanford tank sludges is caustic leaching. Earlier studies with Hanford tank-sludge simulants and with actual Hanford tank sludges have indicated that treating water-washed and caustic-leached solids with oxidants can significantly increase the removal of Cr. Permanganate and ozone have been shown to be generally the most rapid and effective chemical agents for this purpose. The work described in this report continues to examine the effectiveness of solubilizing additional Cr from Hanford tank wastes by oxidation of the water-insoluble solids from tanks U-108, U-109, and SX-108 under alkaline conditions. The current study confirms that permanganate is highly effective at removing chromium from water solids under alkaline conditions, with Cr removals of up to 99+%. Elemental oxygen can also be highly effective, with removals up to 97+%.

  7. Oxidative alkaline dissolution of chromium from Hanford tank sludges: Results of FY 98 studies

    International Nuclear Information System (INIS)

    Plans for disposing of the high-level radioactive wastes at the Hanford Site call for retrieving, pretreating, and finally immobilizing the wastes in a glass matrix. Since the cost for vitrifying and disposing of high-level wastes will be very great, pretreatment processes are being developed to reduce their volume. The baseline method for pretreating Hanford tank sludges is caustic leaching. Earlier studies with Hanford tank-sludge simulants and with actual Hanford tank sludges have indicated that treating water-washed and caustic-leached solids with oxidants can significantly increase the removal of Cr. Permanganate and ozone have been shown to be generally the most rapid and effective chemical agents for this purpose. The work described in this report continues to examine the effectiveness of solubilizing additional Cr from Hanford tank wastes by oxidation of the water-insoluble solids from tanks U-108, U-109, and SX-108 under alkaline conditions. The current study confirms that permanganate is highly effective at removing chromium from water solids under alkaline conditions, with Cr removals of up to 99+%. Elemental oxygen can also be highly effective, with removals up to 97+%

  8. Surface analytical characterization of chromium-stabilized protecting oxide layers on stainless steel referring to activity buildup

    Science.gov (United States)

    Thieme, M.; Scharnweber, D.; Drechsler, L.; Heiser, C.; Adolphi, B.; Weiss, A.

    1992-08-01

    Surface analytical methods were used to characterize both protecting oxide layers formed by hydrothermal chromate treatment (HTCT) on stabilized austenitic stainless steel and hydrothermally grown corrosion product layers (CPL) within the scope of lowering the activity buildup in the primary circuit of nuclear power plants. Morphology, thickness and chromium depth distribution of the layers proved to be considerably different from each other. According to Raman microspectrometry, there were also alterations in the chemical nature of the oxide species. Preceding electropolishing gave rise to particular properties of the respective layers. Prerequisites for an optimal corrosion behaviour of the protecting layers are discussed. Titanium-containing precipitations were oxidatively transformed by HTCT.

  9. Avoiding chromium transport from stainless steel interconnects into contact layers and oxygen electrodes in intermediate temperature solid oxide electrolysis stacks

    Science.gov (United States)

    Schlupp, Meike V. F.; Kim, Ji Woo; Brevet, Aude; Rado, Cyril; Couturier, Karine; Vogt, Ulrich F.; Lefebvre-Joud, Florence; Züttel, Andreas

    2014-12-01

    We investigated the ability of (La0.8Sr0.2)(Mn0.5Co0.5)O3-δ (LSMC) and La(Ni0.6Fe0.4)O3-δ (LNF) contact coatings to avoid the transport of Cr from steel interconnects to solid oxide electrolysis electrodes, especially to the anode. The transport of chromium from commercial Crofer 22 APU (ThyssenKrupp) and K41X (AISI441, Aperam Isbergues) steels through LSMC and LNF contact coatings into adjacent (La0.8Sr0.2)MnO3-δ (LSM) oxygen electrodes was investigated in an oxygen atmosphere at 700 °C. Chromium concentrations of up to 4 atom% were detected in the contact coatings after thermal treatments for 3000 h, which also lead to the presence of chromium in adjacent LSM electrodes. Introduction of a dense (Co,Mn)3O4 coating between steel and contact coating was necessary to prevent the diffusion of chromium into contact coatings and electrodes and should lead to extended stack performance and lifetime.

  10. Effects of chromium and chromium + vitamin C combination on metabolic, oxidative, and fear responses of broilers transported under summer conditions

    Science.gov (United States)

    Perai, A. H.; Kermanshahi, H.; Moghaddam, H. Nassiri; Zarban, A.

    2015-04-01

    A total of 240 female broilers (42 days old) were randomly assigned to four groups with six replicates and fed either a basal diet (two control groups) or a basal diet supplemented with either 1,200 μg Cr+3 from chromium (Cr) methionine/kg (Cr group) or 1,200 μg Cr+3 from Cr methionine plus 800 mg vitamin C (Vit C)/kg of diet (Cr + Vit C group). After 7 days on the dietary treatment, all groups except one of the controls were transported for 3 h under the summer conditions. Performance parameters were not influenced by dietary treatments. The plasma concentrations of insulin, triiodothyronine, triglyceride, and the ratio of triiodothyronine/thyroxin were decreased and the ratio of glucose/insulin was increased due to transport process. Road transportation also increased the plasma concentrations of protein, cholesterol, aspartate aminotransferase, and creatine kinase and decreased the concentration of low-density lipoprotein cholesterol in the Cr + Vit C group. The pretransport concentrations of insulin and triiodothyronine were highest in the Cr + Vit C group. The concentration of phosphorous was lower in the Cr group than that in the other groups after transport. No significant effects of dietary treatments were observed on the other biochemical parameters. Transport increased malondialdehyde concentration in the control group and did not change plasma total antioxidant capacity and erythrocyte glutathione peroxidase activity. Either in combination or alone, Cr increased plasma total antioxidant capacity (before transport P ≤ 0.05, after transport P = 0.07) but did not affect the concentration of malondialdehyde and activity of glutathione peroxidase. The duration of tonic immobility (TI) was similar between nontransported control chicks and transported chicks without any supplements. Pretreatment with Cr + Vit C significantly reduced the duration of TI.

  11. Formation of chromium oxide nanoparticles by gamma irradiation of chromate solutions

    International Nuclear Information System (INIS)

    One of the operational and safety challenges of nuclear reactors is the corrosion of coolant system materials. Corrosion products released into the reactor coolant circulate through the reactor core and can be deposited on surfaces there where they can be neutron activated. If these radioactive species are then released into the coolant, they can migrate out of the core and deposit on piping and components located outside the biological shield of the reactor core. These activated corrosion products pose a radiological hazard to plant workers. The radiolysis of water produces redox-active radicals and molecules that can interact very effectively with metallic corrosion products, changing their oxidation states. The solubility of hydrated metal species varies considerably depending on their oxidation state. For example, ferrous iron is several orders of magnitude more soluble than ferric iron at acidic and neutral pHs, while CrVI species are much more soluble than CrIII species at all pHs. Conversion of more soluble metal ions to less soluble ions will promote precipitation of metal oxide colloidal particles. The conversion of a dissolved ion to a particle will change the transport behaviour of corrosion products and their removal efficiency from system surfaces or by a purification system. Hence, a well-founded understanding of the behaviour of corrosion product ions in a radiolytic environment is very important in assessing their transport behaviour in a reactor coolant system, and the effectiveness of measures to limit radioactive contamination of the coolant system. The formation of chromium oxide nanoparticles by gamma radiolysis of CrVI (aq) (CrO42- or Cr2O72-) solutions was investigated as a function of pH and CrVI (aq) concentration using a range of chemical and particle analysis techniques. The results show that CrVI (aq) is reduced to less soluble CrIII species by reducing radiolysis products (e.g., .eaq-). These insoluble CrIII species provide nucleation

  12. Chromium oxide nanoparticle-induced genotoxicity and p53-dependent apoptosis in human lung alveolar cells.

    Science.gov (United States)

    Senapati, Violet Aileen; Jain, Abhishek Kumar; Gupta, Govind Sharan; Pandey, Alok Kumar; Dhawan, Alok

    2015-10-01

    Chromium oxide (Cr2 O3 ) nanoparticles (NPs) are being increasingly used as a catalyst for aromatic compound manufacture, abrading agents and as pigments (e.g., Viridian). Owing to increased applications, it is important to study the biological effects of Cr2 O3 NPs on human health. The lung is one of the main exposure routes to nanomaterials; therefore, the present study was designed to determine the genotoxic and apoptotic effect of Cr2 O3 NPs in human lung epithelial cells (A549). The study also elucidated the molecular mechanism of its toxicity. Cr2 O3 NPs led to DNA damage, which was deduced by comet assay and cytokinesis block micronucleus assay. The damage could be mediated by the increased levels of reactive oxygen species. Further, the oxygen species led to a decrease in mitochondrial membrane potential and an increase in the ratio of BAX/Bcl-2 leading to mitochondria-mediated apoptosis induced by Cr2 O3 NPs, which ultimately leads to cell death. Hence, there is a need of regulations to be imposed in NP usage. The study provided insight into the caspase-dependent mechanistic pathway of apoptosis. PMID:26086747

  13. The Behaviour of Chromium Isotopes during the Oxidative Weathering of Ultramafic Rocks

    DEFF Research Database (Denmark)

    Paulukat, Cora Stefanie; Døssing, Lasse Nørbye; Mondal, Sisir K.;

    The chromium isotope system has been proven to be a redox-sensitve proxy in ancient and modern environmental studies (e.g. [1], [2]). In this study we investigated Cr isotope fractionation during soil formation from Archean (3.1-3.3 Ga) ultramafic rocks, intruded into metamorphic rocks of the Iron...... are characterised by a Cr loss of up to 74 %. These data are consistent with the findings of Crowe et al. [2] who also studied the effects of weathering of ultramafic rocks in Indonesia on the Cr isotope system. These authors demonstrate that oxidation of Cr(III) to Cr(VI) in the soils is accompanied by isotopic...... shifts. Thereby the Cr(VI) lost to runoff is enriched in the heavier 53Cr, while the lighter 52Cr preferentially remains in the residual Cr(III) pool of the soils. We measured high (up to 1.2 ppm) concentrations of total dissolved Cr in the mine drainage waters. Isotopically the mine waters are slightly...

  14. Mechanistic investigation of toxicity of chromium oxide nanoparticles in murine fibrosarcoma cells.

    Science.gov (United States)

    Alarifi, Saud; Ali, Daoud; Alkahtani, Saad

    2016-01-01

    Chromium oxide nanoparticles (Cr2O3NPs) are widely used in polymers and paints. In the present study, we aimed to determine the toxicity of Cr2O3NPs in murine fibrosarcoma (L929) cells. The cytotoxicity of Cr2O3NPs was measured by MTT and neutral red uptake assays; Cr2O3NPs had significant cytotoxic effects on L929 cells. Enhancement of intracellular reactive oxygen species was observed in L929 cells after exposure to Cr2O3NPs. Cr2O3NPs produced caspase-3, indicating that exposure to Cr2O3NPs induced apoptosis. After exposure to Cr2O3NPs, the cellular glutathione level decreased and lipid peroxidation, superoxide dismutase, and catalase increased in a dose- and time-dependent manner. By using single-cell gel tests, we also observed increased DNA damage in a Cr2O3NP exposure-duration- and dose-dependent fashion. Cell toxicity and DNA damage may be useful biomarkers for determining the safety of Cr2O3NPs in human and animal health. PMID:27099490

  15. Effect Of Chromium Nicotinate On Oxidative Stability, Chemical Composition And Meat Quality Of Growing-Finishing Pigs

    Directory of Open Access Journals (Sweden)

    Ondřej Bučko

    2015-12-01

    Full Text Available The effect of different organic sources of Cr on growth, feed efficiency and carcass value is known but there is a lack of information between chromium nicotinate (CrNic and pork quality. Therefore, purpose of this research was to investigate the effects of CrNic on chemical composition, quality and oxidative stability of pork meat. In the study, pigs of Large White breed (40 pcs were used. The pigs were divided into two groups, namely the control and the experimental of 20 pcs with equal number of barrows and gilts. The pigs were fed the same diet which consisted of three feed mixtures applied at the different growth phases, from 30 - 45 kg OS-03, 45 - 70 kg OS-04 and 70 - 100 kg OS-05. The pigs were allowed ad libitum access to feed and water. The diet of experimental group was supplemented with 0.75 mg.kg-1 CrNic in the form of chromium-inactivated yeast Saccharomyces cerevisiae. The fattening period in pigs lasted from 30 to 100 kg. The chromium supplementation led to a significantly higher content of chromium in longissimus thoracis muscle (LT of experimental pigs. In addition, the results showed a statistically significant difference (p ≤0.05 in retention of chromium in the LT, monounsaturated and omega-3 polyunsaturated fatty acids content in experimental group compared with control. Moreover, there was highly significant (p £0.05 difference in essential fatty acids, as well as in oxidative stability in 7 days, among the groups. The highly significant differences were also observed among sexes, namely in total water, protein and intramuscular fat contents, colour CIE b* in both times, and oxidative stability. However, physical-technological parameters (pH, drip loss, shear force and meat colour were not affected when pigs were fed the supplement. On the whole, the positive effect of chromium nicotinate in most of investigated parameters may be beneficial not only for pork industry but also for consumers. Normal 0 21 false false false

  16. Influence of Nano-Ceria Sol-Gel Coating on Oxidation Behavior of Chromium at 1 000℃

    Institute of Scientific and Technical Information of China (English)

    JIN Hui-ming; ZHOU Xiao-wei; ZHANG Lin-nan

    2009-01-01

    Isothermal oxidation behavior of chromium with and without nanon sol-gel CeO_2 coating is studied at 1 000 ℃ in air. Scanning electron microscopy (SEM)and transmission electron microscopy (TEM)are used to examine the sur-face morphology and mierostructure of the oxide films. It is found that ceria coating greatly improves the anti-oxida-tion property of chromium. Laser Raman spectrometer and X-ray diffraction spectrometer (XRD)are also used to study the stress level in oxide films formed on ceria-coated and ceria-free Cr. Secondary ion mass spectrometer (SIMS)is used to examine Cr, O and Ce element distribution in depth in oxide films. Results show that nano-ceria application greatly reduces the growth speed and grain size of Cr_2O_3 film, and this fine grained Cr_2O_3 film probably has better high temperature plasticity, i.e. , oxide film relieves part of the compressive stress by means of creeping. Meanwhile, CeO_2 changes the oxide film growth mechanism from predominant cation outward diffusion to anion in-ward diffusion. XRD and Raman testing results both show the stress declination effect due to nano-CeO_2 application, and their discrepancy in the rare earth effect is analyzed.

  17. Thermal and Photochemical Reactions of NO2 on a Chromium (III) Oxide Surface

    Science.gov (United States)

    Nishino, N.; Finlayson-Pitts, B. J.

    2011-12-01

    Chromium oxide (Cr2O3) is a major component of the oxide layer on stainless steel surfaces. It is also widely used as pigment in paints and roofs and as a protective coating on various surfaces. While many studies have focused on the catalytic activity of Cr2O3 surfaces for selective catalytic reduction (SCR), less attention has been paid to its surface chemistry involving atmospherically important species such as NO2 under atmospheric conditions. In this study, we have investigated thermal and photochemical reactions of NO2 in the presence and the absence of water vapor, using a thin layer of Cr2O3 as a model for the surface of stainless steel as well as other similarly coated surfaces in the boundary layer. A 30 nm thick Cr2O3 film was deposited on a germanium attenuated total reflectance (ATR) crystal, and the changes in the surface species were monitored by Fourier Transform Infrared (FTIR) spectroscopy. Upon NO2 adsorption, nitrate (NO3-) ions appeared likely coordinated to Cr3+ ion(s). The NO3- peaks reversibly shifted when water vapor was added, suggesting that NO3- become solvated. Irradiation at 311 nm led to a decrease in NO3- ions under both dry and humid conditions. The major gas-phase species formed by the irradiation was NO under dry conditions, while NO2 was mainly formed in the presence of H2O. Possible mechanisms and the implications for heterogeneous NO2 chemistry in the boundary layer will be discussed. The results will also be compared to similar chemistry on other surfaces.

  18. Fabrication of a novel chromium-iron oxide (Cr2Fe6O12) nanoparticles by thermal treatment method

    International Nuclear Information System (INIS)

    In this research,a novel chromium-iron oxide (Cr2Fe6O12) nanoparticle with rhombohedral symmetry was prepared by a simple thermal treatment method.Heat treatment was conducted using an electric cylinder furnace in an air atmosphere at temperatures between 773 and 923 K, where the produced chromium-ironoxide nanoparticles had different crystallite sizes ranging from 9 to 20 nm. The products were well characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscope (FESEM), X-ray analysis (EDXA), and Fourier transform infrared spectroscopy (FT-IR). The samples demonstrated a magnetic behavior with unpaired electron spins, which was confirmed by using vibrating sample magnetometer (VSM) and electron paramagnetic resonance (EPR) spectroscopy. - Highlights: • An aqueous solution of PVA and metal nitrates consist of Fe (NO3)3·9H2O and Cr (NO3)3·9H2O was prepared at 353 K • The mixed solution was heated at 373 K to evaporate the water and the resulting solid was crushed to powder • The influence of calcination temperature on structure and magnetic properties of a novel chromium-iron oxide (Cr2Fe6O12) nanoparticle was characterized

  19. Binary iron-chromium oxide as negative electrode for lithium-ion micro-batteries - spectroscopic and microscopic characterization

    Science.gov (United States)

    Tian, Bingbing; Światowska, Jolanta; Maurice, Vincent; Zanna, Sandrine; Seyeux, Antoine; Marcus, Philippe

    2015-10-01

    (Fe,Cr)-binary oxide thin film electrodes were prepared as negative electrode material for lithium-ion micro-batteries by thermal growth on a stainless steel (AISI 410, FeCr12.5) current collector. The mechanisms of lithiation/delithiation were investigated by means of electrochemical (CV, galvanostatic cycling), spectroscopic (XPS, ToF-SIMS) and microscopic (SEM, AFM) analytical techniques. The as-prepared (Fe, Cr)-binary oxide electrodes exhibit a good cycling performance except the first discharge/charge cycle where a high irreversible capacity is observed due to formation of a solid electrolyte interphase (SEI) layer. The influence of substituting an oxidized iron by an oxidized chromium (CrxFe2-xO3 phase) was evaluated. The data show that the inferior electrochemical conversion activity of substituted oxidized chromium results in hindering lithium transport in the bulk thin film electrode. It was observed that the irreversible morphology modifications together with SEI evolution are critical to capacity degradation while retaining good coulombic efficiency.

  20. Reduction of chromium oxides with calcium carbide during thestainless steelmaking process

    Directory of Open Access Journals (Sweden)

    B. Arh

    2015-04-01

    Full Text Available An efficient reduction of chromium from slag requires an appropriate reduction agent for the given steelmaking technology. The usual slag reduction praxis consists of carbon injections and additions of ferrosilicon and aluminum.Reduction of chromium containing slags with calcium carbide is an appealing alternative. Calcium carbide is a strong reduction agent that unlike ferrosilicon and aluminum also provides the possibility of foaming slag formation.Experimental work regarding chromium slag reduction with calcium carbide towards usual slag reduction praxis is described in this work. The results show that higher reduction rates in the stage of refining period of the melt and higher level of overall chromium reduction from slag can be reached with the blowing of CaC2.

  1. Chromium-Induced Ultrastructural Changes and Oxidative Stress in Roots of Arabidopsis thaliana

    OpenAIRE

    Eleftheriou, Eleftherios P.; Adamakis, Ioannis-Dimosthenis S.; Emmanuel Panteris; Maria Fatsiou

    2015-01-01

    Chromium (Cr) is an abundant heavy metal in nature, toxic to living organisms. As it is widely used in industry and leather tanning, it may accumulate locally at high concentrations, raising concerns for human health hazards. Though Cr effects have extensively been investigated in animals and mammals, in plants they are poorly understood. The present study was then undertaken to determine the ultrastructural malformations induced by hexavalent chromium [Cr(VI)], the most toxic form provided a...

  2. Synergy between hexavalent chromium ions and TiO2 nanoparticles inside TUD-1 in the photocatalytic oxidation of propane, a spectroscopic study

    Science.gov (United States)

    Hamdy, Mohamed S.

    2016-02-01

    Siliceous TUD-1 mesoporous material was bi-functionalized by titanium dioxide nanoparticles and hexavalent chromium ions. The synthesis was carried out by one-pot procedure based on sol-gel technique. The photocatalytic performance of the prepared material was evaluated in the oxidation of propane under the illumination of ultraviolet light (wavelength = 360 nm) and monitored by in situ Fourier transform infrared spectroscopy. The photocatalytic activity of the prepared material exhibited an extra-ordinary activity than the reference samples that contain either hexavalent chromium ions or titanium dioxide nanoparticles only, confirming the true synergy between hexavalent chromium and tetravalent titanium ions of titanium dioxide nanoparticles.

  3. Multivariate modeling of chromium-induced oxidative stress and biochemical changes in plants of Pistia stratiotes L.

    Science.gov (United States)

    Sinha, Sarita; Basant, Ankita; Malik, Amrita; Singh, Kunwar P

    2009-07-01

    Biochemical changes in the plants of Pistia stratiotes L., a free floating macrophyte exposed to different concentrations of hexavalent chromium (0, 10, 40, 60, 80 and 160 microM) for 48, 96 and 144 h were studied. Chromium-induced oxidative stress in macrophyte was investigated using the multivariate modeling approaches. Cluster analysis rendered two fairly distinct clusters (roots and shoots) of similar characteristics in terms of their biochemical responses. Discriminant analysis identified ascorbate peroxidase (APX) as discriminating variable between the root and shoot tissues. Principal components analysis results suggested that malondialdehyde (MDA), superoxide dismutase (SOD), APX, non-protein thiols (NP-SH), cysteine, ascorbic acid, and Cr-accumulation are dominant in root tissues, whereas, protein and guaiacol peroxidase (GPX) in shoots of the plant. Discriminant partial least squares analysis results further confirmed that MDA, SOD, NP-SH, cysteine, GPX, APX, ascorbic acid and Cr-accumulation dominated in the root tissues, while protein in the shoot. Three-way analysis helped in visualizing simultaneous influence of metal concentration and exposure duration on biochemical variables in plant tissues. The multivariate approaches, thus, allowed for the interpretation of the induced biochemical changes in the plant tissues exposed to chromium, which otherwise using the conventional approaches is difficult. PMID:19396544

  4. Enhanced photocatalytic activity of chromium(VI) reduction and EDTA oxidization by photoelectrocatalysis combining cationic exchange membrane processes

    Energy Technology Data Exchange (ETDEWEB)

    Hsu, Hung-Te, E-mail: der11065@hotmail.com [Institute of Environmental Engineering and Management, National Taipei University of Technology, No. 1, Sec. 3, Chung-Hsiao E. Rd., Taipei 106, Taiwan (China); Chen, Shiao-Shing, E-mail: f10919@ntut.edu.tw [Institute of Environmental Engineering and Management, National Taipei University of Technology, No. 1, Sec. 3, Chung-Hsiao E. Rd., Taipei 106, Taiwan (China); Tang, Yi-Fang, E-mail: sweet39005@hotmail.com [Institute of Environmental Engineering and Management, National Taipei University of Technology, No. 1, Sec. 3, Chung-Hsiao E. Rd., Taipei 106, Taiwan (China); Hsi, Hsing-Cheng, E-mail: hchsi@ntut.edu.tw [Institute of Environmental Engineering and Management, National Taipei University of Technology, No. 1, Sec. 3, Chung-Hsiao E. Rd., Taipei 106, Taiwan (China)

    2013-03-15

    Highlights: ► Chromium(VI) reduction and EDTA oxidization were conducted by photoelectrocatalysis. ► Apply the concept of cationic exchange membrane to enhance the conversion efficiency. ► The optimum TiO{sub 2} loading of 1 g/L was observed at acidic pH with current density 4 mA/cm{sup 2}. ► Transformation pathway of EDTA was determined from analyzed byproducts and molecular orbital package analysis. -- Abstract: A novel technology of photoelectrocatalysis (PEC) combining with cationic exchange membrane (CEM) was proposed for simultaneous reduction of chromium(VI) and oxidization of EDTA. The application of CEM was used to enhance the efficiency for prevention of the re-oxidation of reduced chromium with the electron–hole pairs. In this study, effects of current density, pH, TiO{sub 2} dosage, hydraulic retention time (HRT), light intensity and EDTA/Cr(VI) molar ratio were all investigated. The results showed that the optimum conversion efficiency occurred at 4 mA/cm{sup 2} with the presence of CEM. Higher conversion efficiencies were observed at lower pH due to the electrostatic attractions between positive charged Ti-OH{sub 2}{sup +}, and negatively charged Cr(VI) and EDTA. The optimum TiO{sub 2} loading of 1 g/L was depended mainly on the acidic pH range, especially at higher HRT and irradiation intensity. In addition, higher EDTA/Cr(VI) molar ratio enhanced the reduction efficiency of Cr(VI), indicating EDTA plays the role of hole scavenger in this system. Moreover, incomplete EDTA decomposition contributes to the occurrence of intermediates, including nitrilotriacetic acid, iminodiacetic acid, glycine, oxamic acid, lyoxylic acid, oxalic acid, acetic acid and formic acid, as identified by GC/MS. Consequently, transformation pathway was determined from these analyzed byproducts and molecular orbital package analysis.

  5. Enhanced photocatalytic activity of chromium(VI) reduction and EDTA oxidization by photoelectrocatalysis combining cationic exchange membrane processes

    International Nuclear Information System (INIS)

    Highlights: ► Chromium(VI) reduction and EDTA oxidization were conducted by photoelectrocatalysis. ► Apply the concept of cationic exchange membrane to enhance the conversion efficiency. ► The optimum TiO2 loading of 1 g/L was observed at acidic pH with current density 4 mA/cm2. ► Transformation pathway of EDTA was determined from analyzed byproducts and molecular orbital package analysis. -- Abstract: A novel technology of photoelectrocatalysis (PEC) combining with cationic exchange membrane (CEM) was proposed for simultaneous reduction of chromium(VI) and oxidization of EDTA. The application of CEM was used to enhance the efficiency for prevention of the re-oxidation of reduced chromium with the electron–hole pairs. In this study, effects of current density, pH, TiO2 dosage, hydraulic retention time (HRT), light intensity and EDTA/Cr(VI) molar ratio were all investigated. The results showed that the optimum conversion efficiency occurred at 4 mA/cm2 with the presence of CEM. Higher conversion efficiencies were observed at lower pH due to the electrostatic attractions between positive charged Ti-OH2+, and negatively charged Cr(VI) and EDTA. The optimum TiO2 loading of 1 g/L was depended mainly on the acidic pH range, especially at higher HRT and irradiation intensity. In addition, higher EDTA/Cr(VI) molar ratio enhanced the reduction efficiency of Cr(VI), indicating EDTA plays the role of hole scavenger in this system. Moreover, incomplete EDTA decomposition contributes to the occurrence of intermediates, including nitrilotriacetic acid, iminodiacetic acid, glycine, oxamic acid, lyoxylic acid, oxalic acid, acetic acid and formic acid, as identified by GC/MS. Consequently, transformation pathway was determined from these analyzed byproducts and molecular orbital package analysis

  6. The analytical biochemistry of chromium.

    OpenAIRE

    Katz, S A

    1991-01-01

    The essentiality and carcinogenicity of chromium depend on its chemical form. Oxidation state and solubility are particularly important in determining the biological effects of chromium compounds. For this reason, total chromium measurements are of little value in assessing its nutritional benefits or its toxicological hazards. Aqueous sodium carbonate-sodium hydroxide solutions have been successfully used for extracting hexavalent chromium from a variety of environmental and biological matri...

  7. Vacuum-arc chromium coatings for Zr-1%Nb alloy protection against high-temperature oxidation in air

    International Nuclear Information System (INIS)

    The effect of vacuum-arc Cr coatings on the alloy E110 resistance to the oxidation in air at temperatures 1020 and 1100 deg C for 3600 s has been investigated. The methods of scanning electron microscope, X-ray analysis and nanoindentation were used to determine the thickness, phase, mechanical properties of coatings and oxide layers. The results show that the chromium coating can effectively protect fuel tubes against high-temperature oxidation in air for one hour. In the coating during oxidation at T = 1100 deg C a Cr2O3 oxide layer of 5 μm thickness is formed preventing further oxygen penetration into the coating, and thus the tube shape is conserved. Under similar test conditions the oxidation of uncoated tubes with formation of a porous monocline oxide of ZrO2 of a thickness more than ≥ 250 μm is observed, then the deformation and cracking of samples occur and the oxide layer breaks away

  8. The properties and transport phenomena in oxide films on iron, nickel, chromium and their alloys in aqueous environments

    Energy Technology Data Exchange (ETDEWEB)

    Laitinen, T.; Bojinov, M.; Betova, I.; Maekelae, K.; Saario, T. [VTT Manufacturing Technology, Espoo (Finland)

    1999-01-01

    The construction materials used in coolant systems in nuclear power plants become covered with oxide films as a result of exposure to the aqueous environment. The susceptibility of the materials to different forms of corrosion, as well as the extent of the incorporation of radioactive species on the surfaces of the primary circuit, are greatly influenced by the physical and chemical properties of these oxide films. The composition and characteristics of the oxide films in turn depend on the applied water chemistry. This work was undertaken in order to collect and evaluate the present views on the structure and behaviour of oxide films formed on iron- and nickel-based materials in aqueous environments. This survey should serve to recognise the areas in which more understanding and research effort is needed. The review begins with a discussion on the bulk oxides of iron, nickel and chromium, as well as their mixed oxides. In addition to bulk oxides, the structure and properties of oxide films forming on pure iron, nickel and chromium and on iron- and nickel-based engineering alloys are considered. General approaches to model the structure and growth of oxide films on metals are discussed in detail. The specific features of the oxide structures, properties and growth at high temperatures are presented with special focus on the relevance of existing models. Finally, the role of oxide films in localised corrosion, oxide breakdown pitting. Stress corrosion cracking and related phenomena is considered. The films formed on the surfaces of iron- and nickel-based alloys in high-temperature aqueous environments generally comprise two layers, i.e. the so-called duplex structure. The inner part is normally enriched in chromium and has a more compact structure, while the outer part is enriched in iron and has a cracked or porous structure. The information collected clearly indicates the effect of the chemical environment on the properties of oxide films growing on metal surfaces

  9. The properties and transport phenomena in oxide films on iron, nickel, chromium and their alloys in aqueous environments

    International Nuclear Information System (INIS)

    The construction materials used in coolant systems in nuclear power plants become covered with oxide films as a result of exposure to the aqueous environment. The susceptibility of the materials to different forms of corrosion, as well as the extent of the incorporation of radioactive species on the surfaces of the primary circuit, are greatly influenced by the physical and chemical properties of these oxide films. The composition and characteristics of the oxide films in turn depend on the applied water chemistry. This work was undertaken in order to collect and evaluate the present views on the structure and behaviour of oxide films formed on iron- and nickel-based materials in aqueous environments. This survey should serve to recognise the areas in which more understanding and research effort is needed. The review begins with a discussion on the bulk oxides of iron, nickel and chromium, as well as their mixed oxides. In addition to bulk oxides, the structure and properties of oxide films forming on pure iron, nickel and chromium and on iron- and nickel-based engineering alloys are considered. General approaches to model the structure and growth of oxide films on metals are discussed in detail. The specific features of the oxide structures, properties and growth at high temperatures are presented with special focus on the relevance of existing models. Finally, the role of oxide films in localised corrosion, oxide breakdown pitting. Stress corrosion cracking and related phenomena is considered. The films formed on the surfaces of iron- and nickel-based alloys in high-temperature aqueous environments generally comprise two layers, i.e. the so-called duplex structure. The inner part is normally enriched in chromium and has a more compact structure, while the outer part is enriched in iron and has a cracked or porous structure. The information collected clearly indicates the effect of the chemical environment on the properties of oxide films growing on metal surfaces

  10. Thermoelastic properties of chromium oxide Cr2O3 (eskolaite) at high pressures and temperatures

    Science.gov (United States)

    Dymshits, Anna M.; Dorogokupets, Peter I.; Sharygin, Igor S.; Litasov, Konstantin D.; Shatskiy, Anton; Rashchenko, Sergey V.; Ohtani, Eiji; Suzuki, Akio; Higo, Yuji

    2016-06-01

    A new synchrotron X-ray diffraction study of chromium oxide Cr2O3 (eskolaite) with the corundum-type structure has been carried out in a Kawai-type multi-anvil apparatus to pressure of 15 GPa and temperatures of 1873 K. Fitting the Birch-Murnaghan equation of state (EoS) with the present data up to 15 GPa yielded: bulk modulus ( K 0, T0), 206 ± 4 GPa; its pressure derivative K'0 ,T , 4.4 ± 0.8; (∂ K 0 ,T /∂ T) = ‒0.037 ± 0.006 GPa K‒1; a = 2.98 ± 0.14 × 10-5 K-1 and b = 0.47 ± 0.28 × 10‒8 K‒2, where α 0, T = a + bT is the volumetric thermal expansion coefficient. The thermal expansion of Cr2O3 was additionally measured at the high-temperature powder diffraction experiment at ambient pressure and α 0, T0 was determined to be 2.95 × 10-5 K-1. The results indicate that coefficient of the thermal expansion calculated from the EoS appeared to be high-precision because it is consistent with the data obtained at 1 atm. However, our results contradict α 0 value suggested by Rigby et al. (Brit Ceram Trans J 45:137-148, 1946) widely used in many physical and geological databases. Fitting the Mie-Grüneisen-Debye EoS with the present ambient and high-pressure data yielded the following parameters: K 0, T0 = 205 ± 3 GPa, K'0, T = 4.0, Grüneisen parameter ( γ 0) = 1.42 ± 0.80, q = 1.82 ± 0.56. The thermoelastic parameters indicate that Cr2O3 undergoes near isotropic compression at room and high temperatures up to 15 GPa. Cr2O3 is shown to be stable in this pressure range and adopts the corundum-type structure. Using obtained thermoelastic parameters, we calculated the reaction boundary of knorringite formation from enstatite and eskolaite. The Clapeyron slope (with {{d}}P/{{d}}T = - 0.014 GPa/K) was found to be consistent with experimental data.

  11. Enhanced photocatalytic activity of chromium(VI) reduction and EDTA oxidization by photoelectrocatalysis combining cationic exchange membrane processes.

    Science.gov (United States)

    Hsu, Hung-Te; Chen, Shiao-Shing; Tang, Yi-Fang; Hsi, Hsing-Cheng

    2013-03-15

    A novel technology of photoelectrocatalysis (PEC) combining with cationic exchange membrane (CEM) was proposed for simultaneous reduction of chromium(VI) and oxidization of EDTA. The application of CEM was used to enhance the efficiency for prevention of the re-oxidation of reduced chromium with the electron-hole pairs. In this study, effects of current density, pH, TiO2 dosage, hydraulic retention time (HRT), light intensity and EDTA/Cr(VI) molar ratio were all investigated. The results showed that the optimum conversion efficiency occurred at 4mA/cm(2) with the presence of CEM. Higher conversion efficiencies were observed at lower pH due to the electrostatic attractions between positive charged TiOH2(+), and negatively charged Cr(VI) and EDTA. The optimum TiO2 loading of 1g/L was depended mainly on the acidic pH range, especially at higher HRT and irradiation intensity. In addition, higher EDTA/Cr(VI) molar ratio enhanced the reduction efficiency of Cr(VI), indicating EDTA plays the role of hole scavenger in this system. Moreover, incomplete EDTA decomposition contributes to the occurrence of intermediates, including nitrilotriacetic acid, iminodiacetic acid, glycine, oxamic acid, lyoxylic acid, oxalic acid, acetic acid and formic acid, as identified by GC/MS. Consequently, transformation pathway was determined from these analyzed byproducts and molecular orbital package analysis. PMID:23380448

  12. Effect of oxidation heat treatment on the bond strength between a ceramic and cast and milled cobalt-chromium alloys.

    Science.gov (United States)

    Li, Jieyin; Ye, Xiuhua; Li, Bohua; Liao, Juankun; Zhuang, Peilin; Ye, Jiantao

    2015-08-01

    There is a dearth of dental scientific literature on the effect of different oxidation heat treatments (OHTs) (as surface pretreatments) on the bonding performance of cast and milled cobalt-chromium (CoCr) alloys. The objective of this study was to evaluate the effect of different OHTs on the bond strength between a ceramic and cast and milled CoCr alloys. Cobalt-chromium metallic specimens were prepared using either a cast or a milled method. Specimens were subjected to four different OHT methods: without OHT; OHT under normal atmospheric pressure; OHT under vacuum; and OHT under vacuum followed by sandblasting. The metal-ceramic bond strength was evaluated using a three-point bending test according to ISO9693. Scanning electron microscopy and energy-dispersive spectroscopy were used to study the specimens' microstructure and elemental composition. The bond strength was not affected by the CoCr manufacturing method. Oxidation heat treatment performed under normal atmospheric pressure resulted in the highest bond strength. The concentration of oxygen on the alloy surfaces varied with the different pretreatment methods in the following order: OHT under normal atmospheric pressure > OHT under vacuum > without OHT ≈ OHT under vacuum followed by sandblasting. PMID:26104804

  13. Stability of phosphonic self assembled monolayers (SAMs) on cobalt chromium (Co-Cr) alloy under oxidative conditions

    International Nuclear Information System (INIS)

    Cobalt chromium (Co-Cr) alloys have been widely used in the biomedical arena for cardiovascular, orthopedic and dental applications. Surface modification of the alloy allows us to tailor the interfacial properties to address critical challenges of Co-Cr alloy in medical applications. Self assembled monolayers (SAMs) of Octadecylphosphonic acid (ODPA) have been used to form thin films on the oxide layer of the Co-Cr alloy surface by solution deposition technique. The SAMs formed were investigated for their stability to oxidative conditions of ambient laboratory environment over periods of 1, 3, 7 and 14 days. The samples were then characterized for their stability using X-ray Photoelectron Spectroscopy (XPS), Atomic Force Microscopy (AFM) and contact angle measurements. Detailed high energy XPS elemental scans confirmed the presence of the phosphonic monolayer after oxidative exposure which suggested that the SAMs were firmly attached to the oxide layer of Co-Cr alloy. AFM images gave topographical data of the surface and showed islands of SAMs on Co-Cr alloy surface, before and after SAM formation and also over the duration of the oxidative exposure. Contact angle measurements confirmed the hydrophobicity of the surface over 14 days. Thus the SAMs were found to be stable for the duration of the study. These SAMs could be subsequently tailored by modifying the terminal functional groups and could be used for various potential biomedical applications such as drug delivery, biocompatibility and tissue integration.

  14. Stability of phosphonic self assembled monolayers (SAMs) on cobalt chromium (Co-Cr) alloy under oxidative conditions

    Science.gov (United States)

    Bhure, Rahul; Abdel-Fattah, Tarek M.; Bonner, Carl; Hall, Felicia; Mahapatro, Anil

    2011-04-01

    Cobalt chromium (Co-Cr) alloys have been widely used in the biomedical arena for cardiovascular, orthopedic and dental applications. Surface modification of the alloy allows us to tailor the interfacial properties to address critical challenges of Co-Cr alloy in medical applications. Self assembled monolayers (SAMs) of Octadecylphosphonic acid (ODPA) have been used to form thin films on the oxide layer of the Co-Cr alloy surface by solution deposition technique. The SAMs formed were investigated for their stability to oxidative conditions of ambient laboratory environment over periods of 1, 3, 7 and 14 days. The samples were then characterized for their stability using X-ray Photoelectron Spectroscopy (XPS), Atomic Force Microscopy (AFM) and contact angle measurements. Detailed high energy XPS elemental scans confirmed the presence of the phosphonic monolayer after oxidative exposure which suggested that the SAMs were firmly attached to the oxide layer of Co-Cr alloy. AFM images gave topographical data of the surface and showed islands of SAMs on Co-Cr alloy surface, before and after SAM formation and also over the duration of the oxidative exposure. Contact angle measurements confirmed the hydrophobicity of the surface over 14 days. Thus the SAMs were found to be stable for the duration of the study. These SAMs could be subsequently tailored by modifying the terminal functional groups and could be used for various potential biomedical applications such as drug delivery, biocompatibility and tissue integration.

  15. The influence of chromium oxide and titanium nitride layers on vacuum properties of stainless steel H17N13M2T (SS316) surface

    International Nuclear Information System (INIS)

    The outgassing rates of stainless steel H17N13M2T (SS316) covered by chromium oxide and titanium nitride have been presented. It was shown, that the modified layers are good hydrogen diffusion barrier and possess ability of decreased sorption of water steam. (author)

  16. Application of Fe-Cu binary oxide nanoparticles for the removal of hexavalent chromium from aqueous solution.

    Science.gov (United States)

    Khan, Saif Ullah; Zaidi, Rumman; Hassan, Saeikh Z; Farooqi, I H; Azam, Ameer

    2016-01-01

    The adsorption process has been used as an effective technique for the removal of metal ions from aqueous solutions. Groundwater remediation by nanoparticles has received interest in recent years. In the present study, a binary metal oxide of Fe-Cu was prepared and used for the removal of hexavalent chromium from aqueous solution. Batch experiments were performed to investigate the effects of initial Cr (VI) concentration, dose of adsorbent, and pH of solution on the removal efficiency of Cr (VI). The prepared nanostructured Fe-Cu binary oxides were able to reduce the concentration of Cr (VI) in aqueous solution. Binary metal oxides nanoparticle exhibited an outstanding ability to remove Cr (VI) due to high surface area, low particle size, and high inherent activity. The percentage removal efficiency of Cr (VI) increased with nanoparticles doses (0.1 g L(-1)-2.5 g L(-1)), whereas it decreased with initial Cr (VI) concentration (1 mg L(-1)-25 mg L(-1)) and with pH (3-9). The Freundlich model was found to be the better fit for adsorption isotherm. The prepared nanomaterial was characterized using powder X-ray diffraction, scanning electron microscopy (SEM), and ultraviolet (UV)-visible spectroscopy. It showed that the Fe-Cu binary oxides were formed in single phase. SEM micrograph showed aggregates with many nano-sized particles. UV-visible spectroscopy showed quantum confinement effect. PMID:27386994

  17. Investigation of iron-chromium-niobium-titanium ferritic stainless steel for solid oxide fuel cell interconnect applications

    Science.gov (United States)

    Yang, Zhenguo; Xia, Guan-Guang; Wang, Chong-Min; Nie, Zimin; Templeton, Joshua; Stevenson, Jeffry W.; Singh, Prabhakar

    As part of an effort to develop cost-effective ferritic stainless steel-based interconnects for solid oxide fuel cell (SOFC) stacks, both bare AISI441 and AISI441 coated with (Mn,Co) 3O 4 protection layers were studied in terms of its metallurgical characteristics, oxidation behavior, and electrical performance. The addition of minor alloying elements, in particular Nb, led to formation of Laves phases both inside grains and along grain boundaries. In particular, the Laves phase which precipitated out along grain boundaries during exposure at intermediate SOFC operating temperatures was found to be rich in both Nb and Si. The capture of Si in the Laves phase minimized the Si activity in the alloy matrix and prevented formation of an insulating silica layer at the scale/metal interface, resulting in a reduction in area-specific electrical resistance (ASR). However, the relatively high oxidation rate of the steel, which leads to increasing ASR over time, and the need to prevent volatilization of chromium from the steel necessitates the application of a conductive protection layer on the steel. In particular, the application of a Mn 1.5Co 1.5O 4 spinel protection layer substantially improved the electrical performance of the 441 by reducing the oxidation rate.

  18. The prospective protective effect of selenium nanoparticles against chromium-induced oxidative and cellular damage in rat thyroid

    Directory of Open Access Journals (Sweden)

    Hassanin KMA

    2013-05-01

    Full Text Available Kamel MA Hassanin,1 Samraa H Abd El-Kawi,2 Khalid S Hashem1 1Department of Biochemistry, Faculty of Veterinary Medicine, 2Department of Histology, Faculty of Medicine, Beni-Suef University, Beni-Suef, Egypt Background: Nanotechnology has enabled researchers to synthesize nanosize particles that possess increased surface areas. Compared to conventional microparticles, it has resulted in increased interactions with biological targets. Objective: The objective of this study was to determine the protective ability of selenium nanoparticles against hexavalent chromium-induced thyrotoxicity. Design: Twenty male rats were used in the study, and arbitrarily assigned to four groups. Group 1 was the control group, and was given phosphate-buffered saline. Group 2 was the chromium-treated group and was given K2Cr2O7 60 µg/kg body weight intraperitoneally as a single dose on the third day of administration. Group 3 was the nano-selenium-treated group and was given selenium nanoparticles (size 3–20 nm 0.5 mg/kg body weight intraperitoneally daily for 5 consecutive days. Group 4 was the nano-selenium chromium-treated group, which received selenium nanoparticles for 5 days and a single dose of K2Cr2O7 on the third day of administration. Materials and methods: Blood samples were collected from rats for measuring thyroid hormones (free triiodothyronine [T3] and free thyroxine [T4] and oxidative and antioxidant parameters (malondialdehyde [MDA], reduced glutathione [GSH], catalase, and superoxide dismutase [SOD]. Upon dissection, thyroid glands were taken for histopathological examination by using paraffin preparations stained with hematoxylin and eosin (H&E and Masson’s trichrome. Immunohistochemical staining was performed for detecting cellular proliferation using Ki67 antibodies. Results: The present study shows that K2Cr2O7 has a toxic effect on the thyroid gland as a result of inducing a marked oxidative damage and release of reactive oxygen species

  19. Examination of zinc oxide, copper chromium oxide, and copper scandium oxide properties for use in transparent electronics and chemical sensors

    Science.gov (United States)

    Sadik, Patrick

    Greater progress in the field of TCO (transparent oxide semiconductor) research has been hampered by a lack of availability of p-type candidates. Though the n-type TCO's are well documented and easily produced only one well documented oxide has spurred continued efforts at producing robust, p-type behavior, namely ZnO. Though p-ZnO has been produced, a coterminous research effort into improving the film qualities of lesser known naturally p-type TCO's could prove fruitful. Thus, this research has examined the thin film properties of two delafossites, CuCr1-xMgxO 2 and CuSc1-xMgxO2 as well as the surface properties of ZnO. The delafossites, CuCr1-xMgxO2 and CuSc 1-xMgxO2 have been shown to have the superlative properties of high conductivities (220 S cm-1 and 70 S cm-1) and high transparencies in 400 nm thick films of ˜40% and ˜80% throughout the visible spectrum. We have also been the first to describe a near band edge photo-luminescence in CuSc1-x MgxO2 for 0.00spinel interface. We have found that a strategy of using a CuCr1-xMgxO 2/CuSc1-xMgxO2/ZnO on c-Al2O 3 in two ways may allow the growth of either a buffer/p/n or a p/i/n structure. Specifically, growing CuCrO2 at 700°C as a 100 nm nucleation layer followed by a 750°C growth of CuSc1-xMg xO2 and a 400°C growth of ZnO secures an epitaxial growth for the entire structure despite large lattice mismatches between c-Al2O3/CuCrO2 (8.7%) and CuCrO 2/CuScO2 (7.7%). This combined research takes the first steps in making robust pn-heterojunctions possible. Also, in an effort to progress an understanding of the surface chemistry of ZnO we provide results showing marked difference in the chemisorptions of dodecane thiol upon Zn- and O-terminated faces of ZnO.

  20. The effect of chromium oxide on the properties of simulated nuclear waste glasses

    Energy Technology Data Exchange (ETDEWEB)

    Vojtech, O.; Sussmilch, J.; Urbanec, Z. [and others

    1996-02-01

    A study of the effect of chromium on the properties of selected glasses was performed in the frame of a Contract between Battelle, Pacific Northwest Laboratories and Nuclear Research Institute, ReZ. In the period from July 1994 to June 1995 two borosilicate glasses of special composition were prepared according to the PNL procedure and their physical and structural characteristics of glasses were studied. This Final Report contains a vast documentation on the properties of all glasses studied. For the preparation of the respective technology more detailed study of physico-chemical properties and crystallinity of investigated systems would be desirable.

  1. The effect of chromium oxide on the properties of simulated nuclear waste glasses

    International Nuclear Information System (INIS)

    A study of the effect of chromium on the properties of selected glasses was performed in the frame of a Contract between Battelle, Pacific Northwest Laboratories and Nuclear Research Institute, ReZ. In the period from July 1994 to June 1995 two borosilicate glasses of special composition were prepared according to the PNL procedure and their physical and structural characteristics of glasses were studied. This Final Report contains a vast documentation on the properties of all glasses studied. For the preparation of the respective technology more detailed study of physico-chemical properties and crystallinity of investigated systems would be desirable

  2. Growth and characterization of chromium oxide coatings prepared by pulsed-direct current reactive unbalanced magnetron sputtering

    International Nuclear Information System (INIS)

    Approximately 0.2-3.2 μm thick single phase chromium oxide (Cr2O3) coatings with different oxygen flow rates were deposited on silicon and mild steel substrates at low substrate temperature (∼60 deg. C) by pulsed-direct current (DC) reactive unbalanced magnetron sputtering. Two asymmetric bipolar-pulsed DC generators were used to co-sputter two Cr targets, in Ar + O2 plasma. The coatings were characterized using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), nanoindentation hardness tester, optical microscopy, atomic force microscopy, micro-Raman spectroscopy, spectroscopic ellipsometry and potentiodynamic polarization techniques. The XRD data showed the presence of mixture of crystalline (rhombohedral Cr2O3) and amorphous phases for the coatings prepared with oxygen flow rate less than 10 sccm. A complete transformation to amorphous phase was observed at higher oxygen flow rates. The XRD results were supported by Raman spectroscopy data. The XPS data suggested that the chemical state of Cr was in the form of Cr3+. The chromium oxide coatings exhibited a maximum hardness of 22 GPa and an elastic modulus of 208 GPa. The coatings exhibited high thermal stability upon annealing in vacuum up to 500 deg. C and retained hardness as high as 17 GPa. Spectroscopic ellipsometry data indicated that coatings prepared at higher oxygen flow rates were dielectric in nature and those prepared at low oxygen flow rates exhibited an intermediate character, i.e., a transition between the dielectric and the metallic behavior. The corrosion behavior of Cr2O3 coating deposited on mild steel substrates was investigated using potentiodynamic polarization in 3.5% NaCl solution. The results indicated that Cr2O3 coating exhibited superior corrosion resistance as compared to the uncoated substrate

  3. Growth and characterization of chromium oxide coatings prepared by pulsed-direct current reactive unbalanced magnetron sputtering

    Science.gov (United States)

    Barshilia, Harish C.; Rajam, K. S.

    2008-12-01

    Approximately 0.2-3.2 μm thick single phase chromium oxide (Cr 2O 3) coatings with different oxygen flow rates were deposited on silicon and mild steel substrates at low substrate temperature (˜60 °C) by pulsed-direct current (DC) reactive unbalanced magnetron sputtering. Two asymmetric bipolar-pulsed DC generators were used to co-sputter two Cr targets, in Ar + O 2 plasma. The coatings were characterized using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), nanoindentation hardness tester, optical microscopy, atomic force microscopy, micro-Raman spectroscopy, spectroscopic ellipsometry and potentiodynamic polarization techniques. The XRD data showed the presence of mixture of crystalline (rhombohedral Cr 2O 3) and amorphous phases for the coatings prepared with oxygen flow rate less than 10 sccm. A complete transformation to amorphous phase was observed at higher oxygen flow rates. The XRD results were supported by Raman spectroscopy data. The XPS data suggested that the chemical state of Cr was in the form of Cr 3+. The chromium oxide coatings exhibited a maximum hardness of 22 GPa and an elastic modulus of 208 GPa. The coatings exhibited high thermal stability upon annealing in vacuum up to 500 °C and retained hardness as high as 17 GPa. Spectroscopic ellipsometry data indicated that coatings prepared at higher oxygen flow rates were dielectric in nature and those prepared at low oxygen flow rates exhibited an intermediate character, i.e., a transition between the dielectric and the metallic behavior. The corrosion behavior of Cr 2O 3 coating deposited on mild steel substrates was investigated using potentiodynamic polarization in 3.5% NaCl solution. The results indicated that Cr 2O 3 coating exhibited superior corrosion resistance as compared to the uncoated substrate.

  4. Growth and characterization of chromium oxide coatings prepared by pulsed-direct current reactive unbalanced magnetron sputtering

    Energy Technology Data Exchange (ETDEWEB)

    Barshilia, Harish C. [Surface Engineering Division, National Aerospace Laboratories, Post Bag No. 1779, Kodihalli Airport Road, Bangalore 560017 (India)], E-mail: harish@css.nal.res.in; Rajam, K.S. [Surface Engineering Division, National Aerospace Laboratories, Post Bag No. 1779, Kodihalli Airport Road, Bangalore 560017 (India)

    2008-12-30

    Approximately 0.2-3.2 {mu}m thick single phase chromium oxide (Cr{sub 2}O{sub 3}) coatings with different oxygen flow rates were deposited on silicon and mild steel substrates at low substrate temperature ({approx}60 deg. C) by pulsed-direct current (DC) reactive unbalanced magnetron sputtering. Two asymmetric bipolar-pulsed DC generators were used to co-sputter two Cr targets, in Ar + O{sub 2} plasma. The coatings were characterized using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), nanoindentation hardness tester, optical microscopy, atomic force microscopy, micro-Raman spectroscopy, spectroscopic ellipsometry and potentiodynamic polarization techniques. The XRD data showed the presence of mixture of crystalline (rhombohedral Cr{sub 2}O{sub 3}) and amorphous phases for the coatings prepared with oxygen flow rate less than 10 sccm. A complete transformation to amorphous phase was observed at higher oxygen flow rates. The XRD results were supported by Raman spectroscopy data. The XPS data suggested that the chemical state of Cr was in the form of Cr{sup 3+}. The chromium oxide coatings exhibited a maximum hardness of 22 GPa and an elastic modulus of 208 GPa. The coatings exhibited high thermal stability upon annealing in vacuum up to 500 deg. C and retained hardness as high as 17 GPa. Spectroscopic ellipsometry data indicated that coatings prepared at higher oxygen flow rates were dielectric in nature and those prepared at low oxygen flow rates exhibited an intermediate character, i.e., a transition between the dielectric and the metallic behavior. The corrosion behavior of Cr{sub 2}O{sub 3} coating deposited on mild steel substrates was investigated using potentiodynamic polarization in 3.5% NaCl solution. The results indicated that Cr{sub 2}O{sub 3} coating exhibited superior corrosion resistance as compared to the uncoated substrate.

  5. Chromium-Induced Ultrastructural Changes and Oxidative Stress in Roots of Arabidopsis thaliana

    Directory of Open Access Journals (Sweden)

    Eleftherios P. Eleftheriou

    2015-07-01

    Full Text Available Chromium (Cr is an abundant heavy metal in nature, toxic to living organisms. As it is widely used in industry and leather tanning, it may accumulate locally at high concentrations, raising concerns for human health hazards. Though Cr effects have extensively been investigated in animals and mammals, in plants they are poorly understood. The present study was then undertaken to determine the ultrastructural malformations induced by hexavalent chromium [Cr(VI], the most toxic form provided as 100 μM potassium dichromate (K2Cr2O7, in the root tip cells of the model plant Arabidopsis thaliana. A concentration-dependent decrease of root growth and a time-dependent increase of dead cells, callose deposition, hydrogen peroxide (H2O2 production and peroxidase activity were found in Cr(VI-treated seedlings, mostly at the transition root zone. In the same zone, nuclei remained ultrastructurally unaffected, but in the meristematic zone some nuclei displayed bulbous outgrowths or contained tubular structures. Endoplasmic reticulum (ER was less affected under Cr(VI stress, but Golgi bodies appeared severely disintegrated. Moreover, mitochondria and plastids became spherical and displayed translucent stroma with diminished internal membranes, but noteworthy is that their double-membrane envelopes remained structurally intact. Starch grains and electron dense deposits occurred in the plastids. Amorphous material was also deposited in the cell walls, the middle lamella and the vacuoles. Some vacuoles were collapsed, but the tonoplast appeared integral. The plasma membrane was structurally unaffected and the cytoplasm contained opaque lipid droplets and dense electron deposits. All electron dense deposits presumably consisted of Cr that is sequestered from sensitive sites, thus contributing to metal tolerance. It is concluded that the ultrastructural changes are reactive oxygen species (ROS-correlated and the malformations observed are organelle specific.

  6. Chromium-Induced Ultrastructural Changes and Oxidative Stress in Roots of Arabidopsis thaliana.

    Science.gov (United States)

    Eleftheriou, Eleftherios P; Adamakis, Ioannis-Dimosthenis S; Panteris, Emmanuel; Fatsiou, Maria

    2015-01-01

    Chromium (Cr) is an abundant heavy metal in nature, toxic to living organisms. As it is widely used in industry and leather tanning, it may accumulate locally at high concentrations, raising concerns for human health hazards. Though Cr effects have extensively been investigated in animals and mammals, in plants they are poorly understood. The present study was then undertaken to determine the ultrastructural malformations induced by hexavalent chromium [Cr(VI)], the most toxic form provided as 100 μM potassium dichromate (K2Cr2O7), in the root tip cells of the model plant Arabidopsis thaliana. A concentration-dependent decrease of root growth and a time-dependent increase of dead cells, callose deposition, hydrogen peroxide (H2O2) production and peroxidase activity were found in Cr(VI)-treated seedlings, mostly at the transition root zone. In the same zone, nuclei remained ultrastructurally unaffected, but in the meristematic zone some nuclei displayed bulbous outgrowths or contained tubular structures. Endoplasmic reticulum (ER) was less affected under Cr(VI) stress, but Golgi bodies appeared severely disintegrated. Moreover, mitochondria and plastids became spherical and displayed translucent stroma with diminished internal membranes, but noteworthy is that their double-membrane envelopes remained structurally intact. Starch grains and electron dense deposits occurred in the plastids. Amorphous material was also deposited in the cell walls, the middle lamella and the vacuoles. Some vacuoles were collapsed, but the tonoplast appeared integral. The plasma membrane was structurally unaffected and the cytoplasm contained opaque lipid droplets and dense electron deposits. All electron dense deposits presumably consisted of Cr that is sequestered from sensitive sites, thus contributing to metal tolerance. It is concluded that the ultrastructural changes are reactive oxygen species (ROS)-correlated and the malformations observed are organelle specific. PMID:26204828

  7. Investigation of the weldability of iron-aluminum-chromium overlay coatings for corrosion protection in oxidizing/sulfidizing environments

    Science.gov (United States)

    Regina, Jonathan R.

    The current study investigated the effect of chromium additions on the hydrogen cracking susceptibility of Fe-Al weld overlay claddings containing chromium additions. It was found that the weldability of FeAlCr claddings was a function of both the aluminum and chromium concentrations of the weld coatings. Weld overlay compositions that were not susceptible to hydrogen cracking were identified and the underlying mechanism behind the hydrogen cracking phenomenon was investigated further. It was concluded that the cracking behavior of the FeAlCr welds depended strongly on the microstructure of the weld fusion zone. Although it was found that the cracking susceptibility was influenced by the presence of Fe-Al intermetallic phases (namely Fe3 Al and FeAl), the cracking behavior of FeAlCr weld overlay claddings also depended on the size and distribution of carbide and oxide particles present within the weld structure. These particles acted as hydrogen trapping sites, which are areas where free hydrogen segregates and can no longer contribute to the hydrogen embrittlement of the metal. It was determined that in practical applications of these FeAlCr weld overlay coatings, carbon should be present within these welds to reduce the amount of hydrogen available for hydrogen cracking. Based on the weldability results of the FeAlCr weld claddings, coating compositions that were able to be deposited crack-free were used for long-term corrosion testing in a simulated low NOx environment. These alloys were compared to a Ni-based superalloy (622), which is commonly utilized as boiler tube coatings in power plant furnaces for corrosion protection. It was found that the FeAlCr alloys demonstrated superior corrosion resistance when compared to the Ni-based superalloy. Due to the excellent long-term corrosion behavior of FeAlCr weld overlays that were immune to hydrogen cracking, it was concluded that select FeAlCr weld overlay compositions would make excellent corrosion resistant

  8. Dehydrogenation of propane in the presence of CO{sub 2} over polyacid chromium oxide catalysts modified by Mo, W and Mn

    Energy Technology Data Exchange (ETDEWEB)

    Lapidus, A.L.; Agafonov, Yu.A.; Gaidai, N.A.; Nekrasov, N.V.; Davydov, P.E. [Russian Academy of Sciences, Moscow (Russian Federation). N.D. Zelinsky Institute of Organic Chemistry

    2013-11-01

    Effective chromium oxide catalysts without additions and with addition of Mo, W and Mn were prepared and tested in long-duration experiments for propane dehydrogenation in the presence of CO{sub 2}. The optimal concentrations of metals were found. It was shown that the best combination of acid-base and redox properties necessary for a decrease of aggregation of chromium-oxide particles was observed over the following catalyst: (3.0 wt.%Cr-1.5 wt.% Mn)/SiO{sub 2}. This catalyst worked stably in durable tests (500 h). Mechanism of propane oxidative dehydrogenation was studied using unstationary response method. It was shown that the process mechanism was similar over all studied catalysts but the catalysts were differed by the adsorption capacity of the reaction components: CO{sub 2} was tied more firmly than C{sub 3}H{sub 6} over Cr and Cr-Mn, C{sub 3}H{sub 6} was tied more strongly than CO{sub 2} over Cr-W. The reverse water-gas shift reaction proceeded in more extent over chromium-oxide catalysts without additions. (orig.)

  9. Catalytic Spectrophotometric Determination of Chromium

    OpenAIRE

    STOYANOVA, Angelina Miltcheva

    2005-01-01

    The catalytic effect of chromium(III) and chromium(VI) on the oxidation of sulfanilic acid by hydrogen peroxide was studied. The reaction was followed spectrophotometrically by measuring the absorbance of the reaction product at 360 nm. Under the optimum conditions 2 calibration graphs (for chromium(III) up to 100 ng mL-1, and for chromium(VI) up to 200 ng mL-1) were obtained, using the ``fixed time'' method with detection limits of 4.9 ng mL-1 and 3.8 ng mL-1, respectively...

  10. Chromium isotope fractionation during oxidative weathering of a modern basaltic weathering profile

    DEFF Research Database (Denmark)

    D'Arcy, Joan Mary; Døssing, Lasse Nørbye; Frei, Robert

    fractionate under both reducing and oxidizing conditions [1, 2]. Recent studies on d53Cr isotopes in laterite soils show that oxidative weathering of Cr-bearing rocks is accompanied by an isotopic fractionation, where by the lighter isotopes are retained in the residual soil and the heavier isotope is...... enriched in local runoff [1]. This study aims to quantify the stable Cr isotope composition of two modern basaltic weathering profiles, to help better understand the processes that oxidize inert Cr (III) to toxic Cr (VI). We sampled basaltic weathering profiles and associated river waters from areas of two...

  11. Solvent extraction of seven trivalent metal ions in aqueous perchlorate solutions with trioctylphosphine oxide in hexane and rapid extraction of chromium(III)

    International Nuclear Information System (INIS)

    Solvent extraction of scandium(III), yttrium(III), lanthanum(III), europium(III), gallium(III), indium(III), and chromium(III) in weakly acidified 1 mol dm-3 NaClO4 solutions with trioctylphosphine oxide (TOPO) in hexane was studied. The extraction equilibrium was established by the two phase agitation for within 3 min and the extracted species except chromium(III) were found to be M(TOPO)43+(ClO4-)3. The extraction of chromium(III) was also achieved by the two phase agitation for only a short time but, from the dependence of the extraction on the TOPO concentration, the extracted species was assumed to be Cr(TOPO)63+(ClO4-)3. Since the inert Cr(H2O)63+ was so rapidly extracted and the solvation number was higher than that of the other metal ions, the TOPO molecules were assumed to combine with the hydrating water molecules by hydrogen bonds which can be formed in a short time even when the metal ion was inert. The chromium(III) was also extracted rapidly from 1 mol dm-3 NaSCN, NaNO3, NaBr, and NaCl solutions with TOPO in hexane and the extraction was better from NaSCN solution than from NaClO4 solution but it was not effective from the solutions of other salts. (author)

  12. Influence of hydrogen and water vapour on the kinetics of chromium oxide growth at high temperature

    International Nuclear Information System (INIS)

    In support of the selection of structural materials for heat exchangers in helium-cooled high temperature reactors, the oxidation behaviour of the Ni-base chromia-former alloy 230 was investigated at 850 A degrees C in diluted helium atmosphere with a low water vapour content. In such a media, the equivalent partial pressure of oxygen (imposed by the 850 degrees C in diluted helium atmosphere with a low water vapour content. In such a media, the equivalent partial pressure of oxygen (imposed by the P(H2O)/P(H2) ratio) is very low (P(O2)eq around 10-16 Pa). The equivalent partial pressure of oxygen has no straight influence on the parabolic rate constant (kp); on the other hand, P(H2) and P(H2O) demonstrate a complex influence on kp. Photo-electrochemistry analyses revealed that this oxide could simultaneously contain two types of cationic defects. Specific oxidation tests with D2O showed that the oxide scale also contains hydrogen. A mechanist model is proposed in order to describe the scale growth using both cationic defects. Those theoretical results show, at least qualitatively, how P(H2) and P(H2O) may concurrently influence the oxidation rate. (authors)

  13. Oxidation and corrosion behavior of modified-composition, low-chromium 304 stainless steel alloys

    International Nuclear Information System (INIS)

    The effects of substituting less strategic elements than Cr on the oxidation and corrosion resistance of AISI 304 stainless steel were investigated. Cyclic oxidation resistance was evaluated at 870 C. Corrosion resistance was determined by exposure of specimens to a boiling copper-rich solution of copper sulfate and sulfuric acid. Alloy substitutes for Cr included Al, Mn, Mo, Si, Ti, V, Y, and misch metal. A level of about 12% Cr was the minimum amount of Cr required for adequate oxidation and corrosion resistance in the modified composition 304 stainless steels. This represents a Cr saving of at least 33%. Two alloys containing 12% Cr and 2% Al plus 2% Mo and 12% Cr plus 2.65% Si were identified as most promising for more detailed evaluation

  14. Oxidative dissolution of chromium from Hanford tank sludges under alkaline conditions

    International Nuclear Information System (INIS)

    Alkaline oxidative leaching has been performed on caustic leached sludges from the three following Hanford waste tanks: BY-110, S-107, and SX-108. These samples were chosen because they represent types of waste where significant amounts of Cr are located and show relatively poor dissolution of Cr during standard caustic leaching. The experiments involved tests with three chemical oxidants, permanganate, ozone and oxygen, and a blank, argon. The effects of varying the hydroxide concentration of the leachate (from 0.1 M to 3 M) and of time and temperature (from room temperature to 80 degrees C) were also examined

  15. Oxidation behavior of Cr(III) during thermal treatment of chromium hydroxide in the presence of alkali and alkaline earth metal chlorides.

    Science.gov (United States)

    Mao, Linqiang; Gao, Bingying; Deng, Ning; Liu, Lu; Cui, Hao

    2016-02-01

    The oxidation behavior of Cr(III) during the thermal treatment of chromium hydroxide in the presence of alkali and alkaline earth metal chlorides (NaCl, KCl, MgCl2, and CaCl2) was investigated. The amounts of Cr(III) oxidized at various temperatures and heating times were determined, and the Cr-containing species in the residues were characterized. During the transformation of chromium hydroxide to Cr2O3 at 300 °C approximately 5% of the Cr(III) was oxidized to form intermediate compounds containing Cr(VI) (i.e., CrO3), but these intermediates were reduced to Cr2O3 when the temperature was above 400 °C. Alkali and alkaline earth metals significantly promoted the oxidation of Cr(III) during the thermal drying process. Two pathways were involved in the influences the alkali and alkaline earth metals had on the formation of Cr(VI). In pathway I, the alkali and alkaline earth metals were found to act as electron transfer agents and to interfere with the dehydration process, causing more intermediate Cr(VI)-containing compounds (which were identified as being CrO3 and Cr5O12) to be formed. The reduction of intermediate compounds to Cr2O3 was also found to be hindered in pathway I. In pathway II, the alkali and alkaline earth metals were found to contribute to the oxidation of Cr(III) to form chromates. The results showed that the presence of alkali and alkaline earth metals significantly increases the degree to which Cr(III) is oxidized during the thermal drying of chromium-containing sludge. PMID:26650573

  16. Associations of neonatal lead, cadmium, chromium and nickel co-exposure with DNA oxidative damage in an electronic waste recycling town

    International Nuclear Information System (INIS)

    Objective: This study aimed to evaluate the effects of toxic heavy metal co-exposure on DNA oxidative damage in neonates from a primitive e-waste recycling region, Guiyu town, China. Methods: Our participants included 201 pregnant women: 126 from Guiyu town and 75 from Jinping district of Shantou city, where no e-waste recycling and dismantling activities existed. Structured interview questionnaires were administered to the pregnant women and umbilical cord blood (UCB) samples were collected after delivery. The UCB concentrations of lead, cadmium, chromium, and nickel were analyzed by graphite furnace atomic absorption spectrometry (GFAAS). Levels of UCB plasma 8-hydroxydeoxyguanosine (8-OHdG, a DNA oxidative damage biomarker) were determined by enzyme-linked immunosorbent assay. Results: Our results suggested that UCB lead and cadmium concentrations in neonates of Guiyu were significantly higher than those of Jinping (lead: median 110.45 ng/mL vs. 57.31 ng/mL; cadmium: median 2.50 ng/mL vs. 0.33 ng/mL, both P < 0.001). Parents' residence in Guiyu, and parents' work related to e-waste recycling were the risk factors associated with neonate's UCB lead and cadmium levels. No significant difference of UCB plasma 8-OHdG levels was found between Guiyu and the control area. After adjusting for potential confounders, cord plasma 8-OHdG concentrations (ng/mL) were positively associated with blood cadmium (β = 0.126 ng/mL, 95% CI: 0.055 to 0.198 ng/mL), chromium (β = 0.086 ng/mL, 95% CI: 0.014 to 0.158 ng/mL) and nickel (β = 0.215 ng/mL, 95% CI: 0.113 to 0.317 ng/mL) concentrations. Conclusions: The primitive e-waste recycling and dismantling activities may contribute to the elevated umbilical cord blood toxic heavy metal levels in neonates born in Guiyu. Exposures to cadmium, chromium and nickel were associated with increased oxidative DNA damage in neonates. - Highlights: • DNA oxidative damage levels (8-OHdG) in neonates from Guiyu were assessed. • Neonatal lead

  17. Associations of neonatal lead, cadmium, chromium and nickel co-exposure with DNA oxidative damage in an electronic waste recycling town

    Energy Technology Data Exchange (ETDEWEB)

    Ni, Wenqing; Huang, Yue; Wang, Xiaoling; Zhang, Jingwen; Wu, Kusheng, E-mail: kswu@stu.edu.cn

    2014-02-01

    Objective: This study aimed to evaluate the effects of toxic heavy metal co-exposure on DNA oxidative damage in neonates from a primitive e-waste recycling region, Guiyu town, China. Methods: Our participants included 201 pregnant women: 126 from Guiyu town and 75 from Jinping district of Shantou city, where no e-waste recycling and dismantling activities existed. Structured interview questionnaires were administered to the pregnant women and umbilical cord blood (UCB) samples were collected after delivery. The UCB concentrations of lead, cadmium, chromium, and nickel were analyzed by graphite furnace atomic absorption spectrometry (GFAAS). Levels of UCB plasma 8-hydroxydeoxyguanosine (8-OHdG, a DNA oxidative damage biomarker) were determined by enzyme-linked immunosorbent assay. Results: Our results suggested that UCB lead and cadmium concentrations in neonates of Guiyu were significantly higher than those of Jinping (lead: median 110.45 ng/mL vs. 57.31 ng/mL; cadmium: median 2.50 ng/mL vs. 0.33 ng/mL, both P < 0.001). Parents' residence in Guiyu, and parents' work related to e-waste recycling were the risk factors associated with neonate's UCB lead and cadmium levels. No significant difference of UCB plasma 8-OHdG levels was found between Guiyu and the control area. After adjusting for potential confounders, cord plasma 8-OHdG concentrations (ng/mL) were positively associated with blood cadmium (β = 0.126 ng/mL, 95% CI: 0.055 to 0.198 ng/mL), chromium (β = 0.086 ng/mL, 95% CI: 0.014 to 0.158 ng/mL) and nickel (β = 0.215 ng/mL, 95% CI: 0.113 to 0.317 ng/mL) concentrations. Conclusions: The primitive e-waste recycling and dismantling activities may contribute to the elevated umbilical cord blood toxic heavy metal levels in neonates born in Guiyu. Exposures to cadmium, chromium and nickel were associated with increased oxidative DNA damage in neonates. - Highlights: • DNA oxidative damage levels (8-OHdG) in neonates from Guiyu were assessed.

  18. Pyrite oxidation by hexavalent chromium: investigation of the chemical processes by monitoring of aqueous metal species.

    Science.gov (United States)

    Demoisson, Frédéric; Mullet, Martine; Humbert, Bernard

    2005-11-15

    Pyrite, an iron sulfide, occurs in many soils and sediments, making it an important natural reductant of toxic metal pollutants. This study investigated the processes leading to aqueous Cr(VI) reduction by pyrite in a closed thermostated (25 +/- 0.1 degrees C) system and under an argon atmosphere. Synthetic pyrite suspensions were reacted with a range of Cr(VI) solutions from 0 to 7 x 10(-4) M and at pH 2-8. Metal species concentrations were continuously monitored during a period lasting approximately 20 h. Preliminary experiments carried out in acidic media without Cr(VI) have shown that some pyrite dissolution occurred. Then, metal species concentration changes with time during pyrite oxidation by Cr(VI) solutions exhibited two distinct trends depending on the complete or incomplete Cr(VI) removal. As long as chromate existed in solution, the Cr-(Ill) to Fe(lIl) ratio was found to be an effective parameter to investigate the pyrite reaction stoichiometry with Cr(VI). Experimental values close to 2 suggest that sulfur compounds with oxidation states between 0 and 2 should be formed during pyrite oxidation by Cr(VI). If Cr(VI) was completely reduced from solution, then the pyrite oxidation by Fe(lll) ions took place to generate ferrous ions. PMID:16323772

  19. On the nature of iron-chromium oxides in stainless steel steelmaking slags

    Science.gov (United States)

    Matteazzi, P.; Magrini, M.; Ramous, E.

    1986-02-01

    A number of slags from electric steelmaking production of AISI 420 and AISI 304 steels, were examined by Mössbauer spectroscopy. The slag samples were taken before and after oxygen blowing. The slag constitution showed the presence of a metallic part, MO mixed oxide and Fe-Cr spinel (Fe2+ Fe{x/3+} Cr2-xO4' x<1).

  20. On the nature of iron-chromium oxides in stainless steel steelmaking slags

    International Nuclear Information System (INIS)

    A number of slags from electric steelmaking production of AISI 420 and AISI 304 steels, were examined by Moessbauer spectroscopy. The slag samples were taken before and after oxygen blowing. The slag constitution showed the presence of a metallic part, MO mixed oxide and Fe-Cr spinel. (Auth.)

  1. Fabrication of a novel chromium-iron oxide (Cr{sub 2}Fe{sub 6}O{sub 12}) nanoparticles by thermal treatment method

    Energy Technology Data Exchange (ETDEWEB)

    Naseri, Mahmoud Goodarz, E-mail: m.naseri@malayeru.ac.ir [Department of Physics, Faculty of Science, Malayer University, Malayer (Iran, Islamic Republic of); Kamari, Halimah Mohamed [Department of Physics, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor (Malaysia); Dehzangi, Arash [Institute of Microengineering and Nanoelectronics (IMEN), Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor (Malaysia); Kamalianfar, Ahmad [Department of physics, Farhangian University (Iran, Islamic Republic of); Saion, Elias B. [Department of Physics, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor (Malaysia)

    2015-09-01

    In this research,a novel chromium-iron oxide (Cr{sub 2}Fe{sub 6}O{sub 12}) nanoparticle with rhombohedral symmetry was prepared by a simple thermal treatment method.Heat treatment was conducted using an electric cylinder furnace in an air atmosphere at temperatures between 773 and 923 K, where the produced chromium-ironoxide nanoparticles had different crystallite sizes ranging from 9 to 20 nm. The products were well characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscope (FESEM), X-ray analysis (EDXA), and Fourier transform infrared spectroscopy (FT-IR). The samples demonstrated a magnetic behavior with unpaired electron spins, which was confirmed by using vibrating sample magnetometer (VSM) and electron paramagnetic resonance (EPR) spectroscopy. - Highlights: • An aqueous solution of PVA and metal nitrates consist of Fe (NO{sub 3}){sub 3}·9H{sub 2}O and Cr (NO{sub 3}){sub 3}·9H{sub 2}O was prepared at 353 K • The mixed solution was heated at 373 K to evaporate the water and the resulting solid was crushed to powder • The influence of calcination temperature on structure and magnetic properties of a novel chromium-iron oxide (Cr{sub 2}Fe{sub 6}O{sub 12}) nanoparticle was characterized.

  2. Thermal incorporation behavior during the reduction and stabilization of chromium wastes

    OpenAIRE

    Yang, Jun; 楊駿

    2015-01-01

    The possibility of employing periclase to stabilize chromium in chromium wastes into spinel-based ceramics through thermal method was investigated by heating mixture of simulated chromium waste and magnesium oxide. Different types of magnesium oxide precursors were introduced to incorporate chromium oxide into magnesiochromite (MgCr2O4) ranging from 550 ºC to 1350 ºC. Magnesium oxide precursors of both types can effectively incorporate chromium oxide but via different mechanisms. Three main f...

  3. Semi-continuous detection of toxic hexavalent chromium using a sulfur-oxidizing bacteria biosensor.

    Science.gov (United States)

    Gurung, Anup; Oh, Sang-Eun; Kim, Ki Duck; Shin, Beom-Soo

    2012-09-15

    Toxicity testing is becoming a useful tool for environmental risk assessment. A biosensor based on the metabolic properties of sulfur-oxidizing bacteria (SOB) has been applied for the detection of toxic chemicals in water. The methodology exploits the ability of SOB to oxidize elemental sulfur to sulfuric acid under aerobic conditions. The reaction results in an increase in electrical conductivity (EC) and a decrease in pH. Five hours after Cr(6+) was added to the SOB biosensor operated in semi-continuous mode (1 min rapid feeding and 29 min batch reaction), a decrease in effluent EC and an increase in pH (from 2-3 to 6) were detected due to Cr(6+) toxicity to SOB. The SOB biosensor is simple; it can detect toxic levels of Cr(6+) on the order of minutes to hours, a useful time scale for early warning detection systems designed to protect the environment from further degradation. PMID:22647672

  4. Oxidation resistant chromium coating on Zircaloy-4 for accident tolerant fuel cladding

    International Nuclear Information System (INIS)

    The attributes of such a fuel are approved reaction kinetics with steam, a slower hydrogen generation rate, and good cladding thermo-mechanical properties. Many researchers have tried to modify zirconium alloys to improve their oxidation resistance in the early stages of the ATF development. Corrosion resistant coating on cladding is one of the candidate technologies to improve the oxidation resistance of zirconium cladding. By applying coating technology to zirconium cladding, it is easy to obtain corrosion resistance without a change in the base materials. Among the surface coating methods, arc ion plating (AIP) is a coating technology to improve the adhesion owing to good throwing power, and a dense deposit (Fig. 1). Owing to these advantages, AIP has been widely used to efficiently form protective coatings on cutting tools, dies, bearings, etc. In this study, The AIP technique for the protection of zirconium claddings from the oxidation in a high-temperature steam environment was studied. The homogeneous Cr film with a high adhesive ability to the cladding was deposited by AIP and acted as a protection layer to enhance the corrosion resistance of the zirconium cladding. It was concluded that the AIP technology is effective for coating a protective layer on claddings

  5. Determination of hexavalent chromium in ambient air: A story of method induced Cr(III) oxidation

    Science.gov (United States)

    Tirez, Kristof; Silversmit, Geert; Bleux, Nico; Adriaensens, Elke; Roekens, Edward; Servaes, Kelly; Vanhoof, Chris; Vincze, Laszlo; Berghmans, Patrick

    2011-09-01

    The accuracy of the determination of Cr(VI) in ambient particulate matter remains a challenge from the point of view of minimal Cr species interconversion. Knowledge of this method induced oxidation and reduction is particularly relevant for the determination of Cr(VI) in ambient particulate matter, as the level of observed Cr(III) oxidation (average of 1.7% in this study) can contribute significantly to the monitored range of measured Cr(VI) in PM 10. For Cr concentrations in PM 10 > 10 ng Cr m -3, this method induced oxidation could lead to false positive exceeding of an air quality guideline value of 0.2 ng Cr(VI) m -3 in PM 10. The median daily Cr(VI) concentration in PM 10 measured over a monitoring period of more than 2 months at two locations close to a stainless steel factory amounted to 0.9 ng Cr(VI) m -3 and 0.27 ng Cr(VI) m -3. Average daily Cr(VI)/Cr ratios in PM 10 of 3.5% and 2.6% were measured at these locations. The described monitoring for the determination of Cr(VI) in ambient air via alkaline impregnated filters is sensitive (method detection limit of 0.015 ng Cr(VI) m -3) and reproducible (precision of the method ˜25%). The average Cr(VI) recovery of 75% strongly indicates the effects of ambient sampling conditions and ambient particles on the Cr(VI) recoveries. The stability of the Cr(VI) and the Cr(III) spike on 0.12 M NaHCO 3 impregnated filters observed with XANES, indicates that the alkaline extraction of the filter in combination with the sampled air matrix is likely to induce the Cr conversions. The XANES spectra shows further that a Cr-spinel is the predominant component of Cr in ambient air PM 10 at the monitored locations.

  6. Genotoxic effects of chromium oxide nanoparticles and microparticles in Wistar rats after 28 days of repeated oral exposure.

    Science.gov (United States)

    Singh, Shailendra Pratap; Chinde, Srinivas; Kamal, Sarika Srinivas Kalyan; Rahman, M F; Mahboob, M; Grover, Paramjit

    2016-02-01

    The nanotechnology industry has advanced rapidly in the last 10 years giving rise to the growth of the nanoparticles (NPs) with great potential in various arenas. However, the same properties that make NPs interesting raise concerns because their toxicity has not been explored. The in vivo toxicology of chromium oxide (Cr2O3)-NPs is not known till date. Therefore, this study investigated the 28-day repeated toxicity after 30, 300 and 1000 mg/kg body weight (bw)/day oral treatment with Cr2O3-NPs and Cr2O3 microparticles (MPs) in Wistar rats. The mean size of Cr2O3-NPs and Cr2O3-MPs was 34.89 ± 2.65 nm and 3.76 ± 3.41 μm, respectively. Genotoxicity was assessed using comet, micronucleus and chromosomal aberration (CA) assays. The results revealed a significant increase in DNA damage in peripheral blood leucocytes and liver, micronuclei and CA in bone marrow after exposure of 300 and 1000 mg/kg doses of Cr2O3-NPs and Cr2O3-MPs only at 1000 mg/kg bw/day. Cr biodistribution was observed in all the tissues in a dose-dependent manner. The maximum amount of Cr was found in the kidneys and least in the brain of the treated rats. More of the Cr was excreted in the faeces than in the urine. Furthermore, nanotreated rats displayed much higher absorption and tissue accumulation. These findings provide initial data of the probable genotoxicity and biodistribution of NPs and MPs of Cr2O3 generated through repeated oral treatment. PMID:26503004

  7. Oxidative dissolution of pyrite surfaces by hexavalent chromium: Surface site saturation and surface renewal

    Science.gov (United States)

    Graham, Andrew M.; Bouwer, Edward J.

    2012-04-01

    In-situ reduction of toxic Cr(VI) to nontoxic Cr(III) represents an important natural attenuation process for Cr(VI)-impacted environments. This study investigates the stoichiometry and kinetics of Cr(VI) reduction by pyrite, a reduced iron-sulfur mineral ubiquitous in recent estuarine and marine sediments. Pyrite suspensions at surface loadings of 0.28-2.10 m2/L (typical of estuarine or marine sediments) were capable of completely reducing 7-120 μM Cr(VI) on the timescale of minutes to days, with the time to reaction completion decreasing with increasing pyrite loading, decreasing initial Cr(VI) concentration, and decreasing suspension pH. Analysis of metal species (Cr and Fe) and sulfur species in solution and at the mineral surface indicated that Cr(VI) oxidatively dissolved the pyrite surface, releasing ferrous iron and sulfate into solution as the reaction progressed. Surface disulfide groups were postulated as the Cr(VI)-reactive surface entity. Net production or consumption of aqueous Fe(II) was shown to depend upon the relative rates of proton-promoted Fe(II) release, Fe(II) release due to oxidative dissolution of pyrite in the presence of Cr(VI), and Fe(II) consumption due to homogeneous reaction with Cr(VI). Kinetics of Cr(VI) reduction by pyrite displayed a biphasic pattern, and the time to reaction completion increased dramatically with increasing initial Cr(VI) concentration. Rapid Cr(VI) removal occurred early in the reaction progress, attributable to Cr(VI) loss under an adsorption-limited regime. Slow, approximately zero-order, Cr(VI) removal occurred over the bulk of the time courses, and corresponded to Cr(VI) removal under surface site saturation conditions. Stoichiometric Cr(VI) reduction was able to proceed under surface site limited conditions owing to regeneration of reactive surface sites following desorption/dissolution of oxidized surface products, as demonstrated in repeat Cr(VI)-spiking experiments. The role of surface passivation was

  8. Adsorption of titanium, chromium, and copper atoms on thin aluminum and magnesium oxide film surfaces

    Science.gov (United States)

    Tvauri, I. V.; Turiev, A. M.; Tsidaeva, N. I.; Gazzaeva, M. E.; Vladimirov, G. G.; Magkoev, T. T.

    2012-04-01

    Methods of Auger electron spectroscopy (AES), spectroscopy of characteristic electron energy losses (SCEEL), slow electron diffraction (SED), and contact potential difference (CPD) in ultrahigh vacuum are used to investigate the adsorption-emission properties and stability of two-component film systems formed by putting of Ti, Cr, and Cu atoms on MgO-Mo(011) and Al2O3-Mo(011) surfaces. All atoms have the properties of electronegative adsorbates. Continuous adatom monolayers are formed on the Al2O3-Mo(011) system surface, and three-dimensional islands are formed on the MgO-Mo(011) surface. The properties of monoatomic films on the oxide layer surface are close to those observed for bulk materials. No radical changes of the system properties are detected with increasing dielectric layer thickness. The thermal stability of the newly formed structures decreases in the order Ti, Cr, Cu, Al2O3(MgO), and Mo(011).

  9. Oxidative stress related enzymes in response to chromium (Ⅵ) toxicity in Oxya chinensis ( Orthoptera : Acridoidae)

    Institute of Scientific and Technical Information of China (English)

    LI Li-jun; ZHANG Feng; LIU Xue-mei; GUO Ya-ping; MA En-bo

    2005-01-01

    The toxic effects of Cr(Ⅵ) on antioxidant enzymes of Oxya chinensis(Orthoptera: Acridoidae) were determined. Changes in the activities of the antioxidant enzymes superoxide dismutase(SOD), catalase(CAT), and guaiacol peroxidase(GPx) were measured in O. chinensis insects injected with Cr(Ⅵ). Fifth-nymphs of O. chinensis insects were injected with Cr(Ⅵ) with different concentrations (0, 75, 150, 225, 300, 375, 450 mg/kg of body weight). The results showed that Cr(Ⅵ) led to the change of SOD, CAT, and GPx activities at different concentrations, which revealed that: (1) The oxidative stress of SOD increased with the increase of Cr (Ⅵ)concentration. (2) With the increase of Cr (Ⅵ) concentrations, CAT activities for females increased at lower concentrations, but decreased at higher concentration range, which indicated that antioxidant system of O. chinensis was not influenced by the presence of Cr (Ⅵ). A very similar response to Cr(Ⅵ) effect for males indicated that Cr(Ⅵ) concentrations were not high enough to damage O. chinensis in terms of CAT. (3) The GPx activity for females increased in all treatments, which revealed that the damage power of Cr(Ⅵ)was increased with the increase of Cr(Ⅵ) concentrations in terms of GPx, but the effect was not so remarkable. There was not a consistent trend of GPx activities for males in all treatments of Cr(Ⅵ). Cr(Ⅵ)-induced changes in antioxidant enzymes were different for SOD, CAT and GPx, of which the tendency was that activities generally changed with increase of concentrations of Cr(Ⅵ) suggesting SOD, CAT, and GPx could serve as indices of oxidative stress to some extent.

  10. One-Pot Procedures for Preparing (Dichloroiodoarenes from Arenes and Diiodine, with Chromium(VI Oxide as the Oxidant

    Directory of Open Access Journals (Sweden)

    Lech Skulski

    2001-10-01

    Full Text Available Ten representative (dichloroiodoarenes, ArICl2, were prepared from the corresponding arenes and diiodine in variable anhydrous mixtures, ArH/I2/CrO3/AcOH/Ac2O/conc. H2SO4, followed by the addition of conc. hydrochloric acid, used as the source of chlorine; ArICl2 are useful in organic synthesis as mild and selective chlorinating and/or oxidizing agents.

  11. Groundwater contaminant by hexavalent chromium

    Energy Technology Data Exchange (ETDEWEB)

    Parsons, C. [Univ. of Texas, Austin, TX (United States)

    1995-11-01

    Oxidation of trivalent chromium to hexavalent chromium has been investigated as a function of total manganese in soils as well as various incubation conditions. Chromium and manganese contents were analyzed by atomic absorption (graphite furnace and flame emission respectively) following acid digestion. Total hexavalent chromium generation capacity was determined by addition of 0.001 M CrCL3, incubation, and analysis by s-diphenyl carbazide. Samples were then leached with CaSO{sub 4} and MgSO{sub 4} and incubated in various environments (oven, freeze-drier, field moist, ultrafreeze) to test for geogenic generation of Cr(IV). The degree of geogenic generation of hexavalent chromium was compared with total Mn and Cr content as well as hexavalent generational capacity.

  12. Metal-ceramic adhesion: Synthesis of aluminum and chromium mixed metal oxides and extended Hueckel modeling of metal-metal oxide interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Boorse, R.S.

    1993-01-01

    Methods of chemical synthesis and theoretical calculation was used to form new materials that have improved adhesion of a thin metal film to a ceramic. Two goals of this investigation were to develop new synthesis of metal-ceramic couples with improved adhesion between the two components and a fundamental understanding of the chemical factors that affect adhesion. Extended Hueckel calculations were performed on a series of Pt- and NiPt-NiO metal-ceramic couples to examine bonding. The calculations showed an 5 fold increase in adhesion energy in NiPt-NiO over Pt-NiO. Bonding across the interface is found to decrease with increased electron donation as interfacially antibonding orbitals are filled. The synthesis of (Al[sub 1[minus]x]Cr[sub x])[sub 2]O[sub 3] mixed metal oxide powders and coatings by sol-gel methodology utilizing three chromium precursors is reported. Thus, Al[Cr(CO)[sub 3]C[sub 5]H[sub 5

  13. Electrochemical investigation of the two-stage decomposition of oxide deposits on a high-alloy chromium nickel steel by the MOPAC decontamination process

    International Nuclear Information System (INIS)

    The dissertation explains the application of the MOPAC technique for decomposition of oxide layers deposited under PWR conditions on an austenitic, high-alloy chromium nickel steel (DIN material number 1.4550). The examinations were mainly done by impedance spectrometry. With this technique, Cr(III)-oxide is oxidized to chromate in a first step, in 'oxidation solution', and the remaining oxide deposit is then dissolved in 'decontamination solution'. The various specimens used for the examinations were pre-treated ('oxidized') in water in an autoclave at 300deg C and 160 bar, remaining there for either one, two, three, six, or eight months. Extensive pre-experiments were carried out with polished sections of the same material. Comparison of the impedance spectra of these specimens with those of specimens from the autoclave were expected to yield data allowing assignment of impedance spectra to specific transformations in the oxide layers produced in the autoclave. It was found out that the treatment in oxidation solution is the decisive step for oxide decomposition, and hence for the entire result of the decontamination process. (orig.)

  14. Kinetics and Mechanism of Paracetamol Oxidation by Chromium(VI in Absence and Presence of Manganese(II and Sodiumdodecyl Sulphate

    Directory of Open Access Journals (Sweden)

    Maqsood Ahmad Malik

    2007-11-01

    Full Text Available The kinetics of paracetamol oxidation are first order each in [paracetamol] and [HClO4]. The kinetic study shows that the oxidation proceeds in two steps. The effects of anionic micelles of sodiumdodecyl sulphate (SDS and complexing agents (ethylenediammine tetraacetic acid (EDTA and 2,2′-bipyridyl (bpy were also studied. Fast kinetic spectrophotometric method has been described for the determination of paracetamol. The method is based on the catalytic effect of manganese(II on the oxidation of paracetamol by chromium(VI in the presence of HClO4 (= 0.23 mol dm−3. Optimum reaction time is 4 to 6 minutes at a temperature of 30∘C. The addition of manganese(II ions largely decreased the absorbance of chromium(VI at 350 nm. This reaction can be utilized for the determination of paracetamol in drugs.

  15. Chromium in aqueous nitrate plutonium process streams: Corrosion of 316 stainless steel and chromium speciation

    International Nuclear Information System (INIS)

    This study was undertaken to determine if chromium(+6) could exist in plutonium process solutions under normal operating conditions. Four individual reactions were studied: the rate of dissolution of stainless steel, which is the principal source of chromium in process solutions; the rate of oxidation of chromium(+3) to chromium(+6) by nitric acid; and the reduction of chromium(+6) back to chromium(+3) by reaction with stainless steel and with oxalic acid. The stainless steel corrosion rate was found to increase with increasing nitric acid concentration, increasing hydrofluoric acid concentration, and increasing temperature. Oxidation of chromium(+3) to chromium(+6) was negligible at room temperature and only became significant in hot concentrated nitric acid. The rate of reduction of chromium(+6) back to chromium(+3) by reaction with stainless steel or oxalic acid was found to be much greater than the rate of the reverse oxidation reaction. Based on these findings and taking into account normal operating conditions, it was determined that although there would be considerable chromium in plutonium process streams it would rarely be found in the (+6) oxidation state and would not exist in the (+6) state in the final process waste solutions

  16. Thermodynamic properties of chromium bearing slags and minerals. A review

    Energy Technology Data Exchange (ETDEWEB)

    Xiao Yanping; Holappa, L.

    1996-12-31

    In this report, the thermodynamic properties of chromium bearing slags and minerals were reviewed based on the available information in the literature. It includes the analysing methods for oxidation state of chromium in slags, oxidation state of chromium and activities of chromium oxides in slags and minerals. The phase diagrams of chromium oxide systems and chromium distributions between slag and metal phases are also covered ill this review. Concerning the analysing methods, it was found that most of the available approaches are limited to iron free slag systems and the sample preparation is very sensitive to the analysing results. In silicate slags under reducing atmosphere, divalent and trivalent chromium co-exist in the slags. It is agreed that the fraction of divalent chromium to total chromium increases with higher temperature, lower slag basicity and oxygen potential. For the slags under oxidising atmosphere, trivalent, pentavalent and hexavalent states were reported to be stable. The activities of CrO and CrO{sub 1.5} were concluded to have positive deviation from ideal solution. Slag basicity has a positive effect and temperature has a negative effect on the activities of chromium oxides. The phase diagrams of the Cr-O, binary, and ternary chromium containing oxide systems have been examined systematically. The analysis shows that the data on the quaternary and quinary systems are insufficient, and require further investigation. The most important features of the chromium containing silicate slags are the large miscibility gaps and the stability of the chromite spinel. (orig.) (76 refs.)

  17. Amorphous-silicon@silicon oxide/chromium/carbon as an anode for lithium-ion batteries with excellent cyclic stability

    International Nuclear Information System (INIS)

    Highlights: • A new amorphous-Si@SiOx/Cr/carbon anode composite for lithium-ion batteries is synthesized by a simple method. • At a current density of 100 mA g−1, this as-prepared composite exhibit a stable discharge capacity of about 810 mAh g−1 with good capacity retention up to 200 cycles. Even at a current density of 800 mA g−1, a stable discharge capacity of 570 mAh g−1 can be obtained. • This work creates a new method to improve the electrochemical performance of SiO-based electrode materials. - Abstract: A new amorphous-Si@SiOx/Cr/carbon (a-Si@SiOx/Cr/C) anode composite for lithium-ion batteries is synthesized, using SiO, chromium powder and graphite as starting materials. X-ray diffraction (XRD), X-ray photoelectron spectra (XPS), scanning electron microscope (SEM) and high resolution transmission electron microscope (HRTEM) are employed to characterize the composition, morphology and microstructure of the composite. Coin-type cells are assembled to investigate the electrochemical behaviors of the as-prepared composites by constant current charge–discharge technique, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The results show that chromium facilitates the crush of Si@SiOx and graphite during milling, and thus improves their mutual dispersion in the composite. When cycled at 100 mA g−1, the a-Si@SiOx/Cr/C exhibits a stable discharge capacity of about 810 mAh g−1 (calculated on the mass of a-Si@SiOx/Cr/C) with good capacity retention up to 200 cycles. The improved electrochemical performance is attributed to the reduced particle size of a-Si@SiOx and the synergistic effect of carbon and chromium

  18. Kinetic and mechanism of the oxidation of chromium(III) complex with anthranil- N, N-diacetic acid by periodate ion in acidic aqueous solutions

    Science.gov (United States)

    Ali, Ismat H.

    2015-06-01

    The kinetics of oxidation of [CrIII(atda)(H2O)2] (atda = anthranil- N, N-diacetato) complex by IO{4/-} was studied spectrophotometrically in aqueous solutions with pH range 2.20-3.34, 0.30 M ionic strength and in 20.0-40.0°C temperature range. The rate law of the reaction exhibited saturation kinetics. Values of the rate constant for the electron transfer process, the equilibrium constant for dissociation of [CrIII (atda)(H2O)2] to [CrIII (atda) (H2O)OH]+ + H+ and the pre-equilibrium formation constant were calculated. The thermodynamic activation parameters are reported. It is proposed that electron transfer proceeds through an inner-sphere mechanism via coordination of the IVII to chromium(III).

  19. Liberation of chromium from ferrochrome waste materials utilising aqueous ozonation and the advanced oxidation process / Yolindi van Staden

    OpenAIRE

    Van Staden, Yolindi

    2014-01-01

    During ferrochrome (FeCr) production, three types of generic chromium (Cr) containing wastes are generated, i.e. slag, bag filter dust (BFD) and venturi sludge. The loss of these Cr units contributes significantly to the loss in revenue for FeCr producers. In this study, the liberation of Cr units was investigated utilising two case study waste materials, i.e. BFD from a semi-closed submerged arc furnace (SAF) operating on acid slag and the ultrafine fraction of slag (UFS) orig...

  20. IN-VIVO EVALUATION OF HEXAVALENT CHROMIUM INDUCED DNA DAMAGE BY ALKALINE COMET ASSAY AND OXIDATIVE STRESS IN CATLA CATLA

    Directory of Open Access Journals (Sweden)

    Kantha Deivi Arunachalam

    2013-01-01

    Full Text Available In the present study, the acute toxicity of Chromium in fingerlings of Catla catla, an Indian major carp, was evaluated with renewal bioassay method. In vivo studies were designed to assess the extent of Micronucleus Assay, Comet Assay under the exposure of common heavy-metal compounds, namely, Chromium Nitrate, using Catla catla (2n = 20, as a test model. The laboratory acclimatized fishes were divided into four groups. Group I served as positive control and the other three as exposed groups for three different time durations of 7, 14 and 21 days and were subjected to uninterrupted sub lethal concentrations (50% of 96 h LC50. The experiments were planned in such a way that fish from all the groups were sacrificed on the same day. The frequencies of micronuclei and bi-nuclei were evaluated comparatively in peripheral erythrocytes. As a result, it was observed that, the fishes and different tissues showed differential sensitivity to the heavy-metal treatment. A significant increase in the frequencies of micronucleated and binucleated cells and percentage increase in DNA tail (pCatla catla during sub lethal toxicity study was also calculated.

  1. Effect of Supplementing Organic Forms of Zinc, Selenium and Chromium on Performance, Anti-Oxidant and Immune Responses in Broiler Chicken Reared in Tropical Summer.

    Science.gov (United States)

    Rao, S V Rama; Prakash, B; Raju, M V L N; Panda, A K; Kumari, R K; Reddy, E Pradeep Kumar

    2016-08-01

    Two experiments were conducted to study the effect of supplementing organic forms of zinc (Zn), selenium (Se) and chromium (Cr) on performance, anti-oxidant activities and immune responses in broiler chickens from 1 to 21 days of age, which were reared in cyclic heat-stressed condition under tropical summer in open-sided poultry house. A total of 200 (experiment I) and 450-day-old (experiment II) broiler male chicks (Cobb 400) were randomly distributed in stainless steel battery brooders (610 mm × 762 mm × 475 mm) at the rate of five birds per pen. A maize-soybean meal-based control diet (CD) containing recommended (Vencobb 400, Broiler Management Guide) concentrations of inorganic trace minerals and other nutrients was prepared. The CD was supplemented individually with organic form of selenium (Se, 0.30 mg/kg), chromium (Cr, 2 mg/kg) and zinc (Zn, 40 mg/kg) in experiment I. In experiment II, two concentrations of each Zn (20 and 40 mg/kg), Se (0.15 and 0.30 mg/kg) and Cr (1 and 2 mg/kg) were supplemented to the basal diet in 2 × 2 × 2 factorial design. A group without supplementing inorganic trace minerals was maintained as control group in both experiments. Each diet was allotted randomly to ten replicates in both experiments and fed ad libitum from 1 to 21 days of age. At 19th day of age, blood samples were collected for estimation of anti-oxidant and immune responses. Supplementation of Se, Cr and Zn increased (P  0.05) by the interaction between levels of Zn, Se and Cr in broiler diet. The FE improved (P  0.05) the immune responses (Newcastle disease titre and cell-mediated immune response to phytohaemagglutinin-P) in both the experiments. Based on the results, it is concluded that supplementation of organic form of Se, Cr and Zn (0.30, 2 and 40 mg/kg, respectively) either alone or in combination significantly improved performance and anti-oxidant responses (reduced LP and increased superoxide dismutase) in commercial

  2. Manganese oxide nanoflakes/multi-walled carbon nanotubes/chitosan nanocomposite modified glassy carbon electrode as a novel electrochemical sensor for chromium (III) detection

    International Nuclear Information System (INIS)

    Highlights: • CNTs/chitosan/GC electrode used as platform for electrodeposition of MnOx-nanoflakes. • Modified electrode has excellent catalytic activity for oxidation of Cr3+ at pH 3–7. • Detection limit and sensitivity of sensor for Cr3+ detection were 0.3 μM and 18.7 nA/μM. • Sensor has good stability and high selectivity in the presence of common interferences. • Sensor applied for the detection of Cr3+in real samples with satisfactory results. - Abstract: In this research a nanocomposite containing chitosan (Chit) and maltiwalled carbon nanotubes (MWCNTs) was applied as platform for immobilization of electrodeposited manganese oxide (MnOx) nanostructures. First, glassy carbon (GC) electrode modified with thin film of Chitosan/MWCNTs nanocomposite. Then MnOx nanostructures was electrodeposited onto Chitosan/MWCNTs modified GC electrode using combination of constant potential step (0.6 V) and cyclic voltammetry(0.3–0.6 V) techniques. The XRD patterns and scanning electron microscope images indicated immobilization of uniformly MnOx nanoflakes with high crystallite onto MWCNTs/Chit film. The modified electrode shows a well-defined redox couple for Mn2+/MnO2 system. Charge transfer coefficient (α), electron transfer rate constant (ks) and surface concentration (Γ) were 0.394, 3.44 s−1 and 3.3 × 10−11 mol cm−2, respectively. The modified electrode showed excellent electrocatalytic activity toward oxidation of chromium (III) at natural pH solutions. Cyclic voltammetry and hydrodynamic amperometery were applied as measuring techniques for chromium detection. Detection limit, sensitivity and linear concentration range of the sensor were, 0.3 (μM), 18.7 nAμ M−1 and 3 μM to 200 μM, respectively. Moreover, the sensor retained about 90% of its original response toward Cr(III) after storage three months in ambient condition. Furthermore, the sensor response toward different common interferences was negligible. Finally, the developed sensor

  3. Heterogeneous chromium catalysts

    OpenAIRE

    2005-01-01

    The present invention relates to a heterogeneous chromium catalyst system for the polymerisation of ethylene and/or alpha olefins prepared by the steps of: (a) providing a silica-containing support, (b) treating the silica-containing support with a chromium compound to form a chromium-based silica-containing support, (c) activating the chromium-based silica-containing support, (d) chemically reducing the activated chromium-based silica-containing support to produce a precursor catalyst, (e) r...

  4. Oxidation-resistant cermet

    Science.gov (United States)

    Phillips, W. M.

    1977-01-01

    Chromium metal alloys and chromium oxide ceramic are combined to produce cermets with oxidation-resistant properties. Application of cermets includes use in hot corrosive environments requiring strong resistive materials.

  5. Final Report - Effects of High Spinel and Chromium Oxide Crystal Contents on Simulated HLW Vitrification in DM100 Melter Tests, VSL-09R1520-1, Rev. 0, dated 6/22/09

    Energy Technology Data Exchange (ETDEWEB)

    Kruger, Albert A.; Matlack, K. S.; Kot, W.; Pegg, I. L.; Chaudhuri, M.; Lutze, W.

    2013-11-13

    The principal objective of the work was to evaluate the effects of spinel and chromium oxide particles on WTP HLW melter operations and potential impacts on melter life. This was accomplished through a combination of crucible-scale tests, settling and rheological tests, and tests on the DM100 melter system. Crucible testing was designed to develop and identify HLW glass compositions with high waste loadings that exhibit formation of crystalline spinel and/or chromium oxide phases up to relatively high crystal contents (i.e., > 1 vol%). Characterization of crystal settling and the effects on melt rheology was performed on the HLW glass formulations. Appropriate candidate HLW glass formulations were selected, based on characterization results, to support subsequent melter tests. In the present work, crucible melts were formulated that exhibit up to about 4.4 vol% crystallization.

  6. Cleaning-induced arsenic mobilization and chromium oxidation from CCA-wood deck: Potential risk to children.

    Science.gov (United States)

    Gress, J; de Oliveira, L M; da Silva, E B; Lessl, J M; Wilson, P C; Townsend, T; Ma, L Q

    2015-09-01

    Concern about children's exposure to arsenic (As) from wood treated with chromated-copper-arsenate (CCA) led to its withdrawal from residential use in 2004. However, due to its effectiveness, millions of American homes still have CCA-wood decks on which children play. This study evaluated the effects of three deck-cleaning methods on formation of dislodgeable As and hexavalent chromium (CrVI) on CCA-wood surfaces and in leachate. Initial wipes from CCA-wood wetted with water showed 3-4 times more dislodgeable As than on dry wood. After cleaning with a bleach solution, 9.8-40.3μg/100cm(2) of CrVI was found on the wood surface, with up to 170μg/L CrVI in the leachate. Depending on the cleaning method, 699-2473mg of As would be released into the environment from cleaning a 18.6-m(2)-deck. Estimated As doses in children aged 1-6 after 1h of playing on a wet CCA-wood deck were 0.25-0.41μg/kg. This is the first study to identify increased dislodgeable As on wet CCA-wood and to evaluate dislodgeable CrVI after bleach application. Our data suggest that As and CrVI in 25-year old CCA-wood still show exposure risks for children and potential for soil contamination. PMID:26004992

  7. Abatement of Chromium Emissions from Steelmaking Slags - Cr Stabilization by Phase Separation

    OpenAIRE

    Albertsson, Galina

    2013-01-01

    Chromium is an important alloying element in stainless steel but also environmentally harmful element. A number of mineralogical phases present in the slag matrix can contain chromium and lead to chromium leaching. Chromium in slag if not stabilized, could oxidize to the cancerogenic hexavalent state, and leach out if exposed to acidic and oxygen rich environment. Other environmental concerns are slag dusting and chromium escape to the atmosphere. Despite the fact that there is a certain risk...

  8. Effect of gallium,aluminium,and chromium on silica supported V-Mg-O catalysts during oxidative dehydrogenation of propane:Kinetic study

    Institute of Scientific and Technical Information of China (English)

    B.Ravi Kumar; Rajeev Kumar

    2008-01-01

    The oxidative dehydrogenation(ODH)of propane was conducted on gallium,aluminum.and chromium doped Si30VMgO catalysts.On doping,the concentrations of the phases responsible for the activity and selectivity increased in their concentrations.The reaction studies were conducted in a tubular steel reactor at temperatures of 753,783,813.and 843 K and atmospheric pressure.The total flow rates of the feed were chosen as 30,40,50,and 60 ml/min.The propane to oxygen ratios were chosen at 1:1,2:1,and 3:1,respectively.The effect of various dopants on the activity and selectivity of the catalysts was studied.Deactivation studies were conducted over all the catalysts.The kinetic data were analyzed in terms of power law models and Langmuir-Hinshelwood(LH)models.The kinetic data results were analyzed by comparing the effect of dopants.Statistical model discrimination was done for the proposed models.AIC and BIC criteria were used for discrimination of the models.

  9. Preparation of explosive nanoparticles in a porous chromium(III) oxide matrix: a first attempt to control the reactivity of explosives.

    Science.gov (United States)

    Comet, M; Siegert, B; Pichot, V; Gibot, P; Spitzer, D

    2008-07-16

    This paper reports the first attempt to control the combustion and the detonation properties of a high explosive through its structure. A porous chromium(III) oxide matrix produced by the combustion of ammonium dichromate was infiltrated by hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX). The structure of the Cr(2)O(3) matrix was studied by both scanning and transmission electron microscopy (SEM, TEM); the Cr(2)O(3)/RDX nanocomposites were characterized by nitrogen adsorption. A mathematical model based on these techniques was used to demonstrate that the Cr(2)O(3) matrix encloses and stabilizes RDX particles at the nanoscale. The decomposition process of the nanocomposites was investigated by atomic force microscopy (AFM). The reactivity and sensitivity of the nanocomposites were studied by impact and friction tests, differential scanning calorimetry (DSC), time-resolved cinematography and detonation experiments, and were correlated with their structure. The size of RDX nanoparticles and their distribution in the Cr(2)O(3) matrix have an important influence on their reactivity. The reactive properties of nanostructured RDX differ significantly from those of classical micron-sized RDX. For instance, the melting point disappears and the decomposition temperature is significantly lowered. The quantization of the explosive particles in the Cr(2)O(3) matrix decreases the sensitivity to mechanical stress and allows controlling the decomposition mode-i.e. combustion versus detonation. PMID:21828750

  10. Preparation of explosive nanoparticles in a porous chromium(III) oxide matrix: a first attempt to control the reactivity of explosives

    Energy Technology Data Exchange (ETDEWEB)

    Comet, M; Siegert, B; Pichot, V; Gibot, P; Spitzer, D [Laboratoire ISL/CNRS ' Nanomateriaux pour les Systemes Sous Sollicitations Extremes' (NS3E), FRE 3026, French-German Research Institute of Saint-Louis (ISL), 5 rue du General Cassagnou, 68301 Saint-Louis (France)], E-mail: comet@isl.tm.fr

    2008-07-16

    This paper reports the first attempt to control the combustion and the detonation properties of a high explosive through its structure. A porous chromium(III) oxide matrix produced by the combustion of ammonium dichromate was infiltrated by hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX). The structure of the Cr{sub 2}O{sub 3} matrix was studied by both scanning and transmission electron microscopy (SEM, TEM); the Cr{sub 2}O{sub 3}/RDX nanocomposites were characterized by nitrogen adsorption. A mathematical model based on these techniques was used to demonstrate that the Cr{sub 2}O{sub 3} matrix encloses and stabilizes RDX particles at the nanoscale. The decomposition process of the nanocomposites was investigated by atomic force microscopy (AFM). The reactivity and sensitivity of the nanocomposites were studied by impact and friction tests, differential scanning calorimetry (DSC), time-resolved cinematography and detonation experiments, and were correlated with their structure. The size of RDX nanoparticles and their distribution in the Cr{sub 2}O{sub 3} matrix have an important influence on their reactivity. The reactive properties of nanostructured RDX differ significantly from those of classical micron-sized RDX. For instance, the melting point disappears and the decomposition temperature is significantly lowered. The quantization of the explosive particles in the Cr{sub 2}O{sub 3} matrix decreases the sensitivity to mechanical stress and allows controlling the decomposition mode-i.e. combustion versus detonation.

  11. The effects of alkaline earth metal ions and halogen ions on the chromium oxide activities in alkaline earth metal oxide-halide-Cr2O3 system fluxes

    Science.gov (United States)

    Li, Lian-Fu; Jiang, Mao-Fa; Wang, Wen-Zhong; Chen, Zhao-Ping

    2000-06-01

    The solid electrolyte cell — Mo|Cr + Cr2O3‖ZrO2(MgO)‖{Cu-Cr}alloy + (Cr2O3)fluxes|Mo+ is used at 1673 K to determine Cr2O3 activities in MO-MX 2-Cr2O3 (M = Ca2+, Ba2-, X = F- or Cl-) ternary fluxes, which are in equilibrium with the copper-chromium binary alloy. The ternary isothermal phase diagrams of CaO-CaF2-Cr2O3 and BaO-BaCl2-Cr2O3 system fluxes are inferred on the basis of the experimental results and binary phase diagrams. The results indicate that Cr2O3 activities in all fluxes always decrease with the increase of the X MO /X MX2 ratio. Partial replacement of BaO in BaO-BaF2-Cr2O3 fluxes by CaO is acceptable for economy and efficiency considerations. At the same time, partial substitution of BaO for CaO in CaO-CaF2-Cr2O3 fluxes is advantageous for phosphorus removal and chromium retention as a result of the increased Cr2O3 activities, increased basicities, and widening of the liquid zones. Compared to those in BaO-BaF2-Cr2O3 fluxes, Cr2O3 activities in CaO-CaF2-Cr2O3 fluxes approximately follow the same curve as the former, although the position and the width of the liquid zones are considerably different, and activities in BaO-BaCl2-Cr2O3 fluxes are higher at the lower Cr2O3 content, or vice versa. The activity coefficients of Cr2O3 in the fluxes decrease with the increase of the X MO /X MX 2 ratios.

  12. A Kinetic Model of Chromium in a Flame

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Chromium has been identified as a carcinogenic metal.Incineration is the useful method for disposal of toxic chromium hazard waste and a chromium kinetic model in a flame is very important to study chromium oxidation.Chromium chemical kinetics over a range of temperatures of a hydrogen/air flame is proposed.Nine chromium compounds and fifty-eight reversible chemical reactions were considered The forward reaction rates are calculated based on the molecular collision approach for unknown ones and Arrhenius's Law for known ones.The backward reaction rates were calculated according to forward reaction rates, the equilibrium constants and chemical thermodynamics.It is verified by several equilibrium cases and is tested by a hydrogen/air diffusion flame.The results show that the kinetic model could be used in cases in which the chromium kinetics play an important role in a flame

  13. Hexavalent Chromium Workshop

    Science.gov (United States)

    EPA is developing an updated IRIS assessment of hexavalent chromium. This assessment will evaluate the potential health effects of hexavalent chromium from oral and inhalation exposures. An important component of determining the cancer causing potential of ingested hexavalent chr...

  14. Chromium and Genomic Stability

    OpenAIRE

    Wise, Sandra S.; Wise, John Pierce

    2011-01-01

    Many metals serve as micronutrients which protect against genomic instability. Chromium is most abundant in its trivalent and hexavalent forms. Trivalent chromium has historically been considered an essential element, though recent data indicate that while it can have pharmacological effects and value, it is not essential. There are no data indicating that trivalent chromium promotes genomic stability and, instead may promote genomic instability. Hexavalent chromium is widely accepted as high...

  15. Chromium isotope variations

    DEFF Research Database (Denmark)

    D'Arcy, Joan Mary

    Chromium (Cr) stable isotopes are a useful tracer of changes in redox conditions because changes in its oxidation state are accompanied by an isotopic fractionation. For this reason the Cr isotope system is being developed as a potential tool for paleo-redox reconstruction. Dissolved Cr in seawater...... is incorporated into carbonates. Hence, ancient carbonates can potentially record the Cr isotopic composition (δ53Cr ‰) of seawater in the geological past. Reliable application and interpretation of this proxy requires a detailed knowledge about processes that fractionate Cr on the Earth’s surface......, and the quantification the Cr isotope composition of major Cr fluxes into and out of ocean. This thesis adds to the current knowledge of the Cr isotope system and is divided into two studies. The focus of the first study was to determine what processes control the Cr isotopic compositionof river...

  16. IN-VIVO EVALUATION OF HEXAVALENT CHROMIUM INDUCED DNA DAMAGE BY ALKALINE COMET ASSAY AND OXIDATIVE STRESS IN CATLA CATLA

    OpenAIRE

    Kantha Deivi Arunachalam; Sathesh Kumar Annamalai; Jaya Krishna Kuruva

    2013-01-01

    In the present study, the acute toxicity of Chromium in fingerlings of Catla catla, an Indian major carp, was evaluated with renewal bioassay method. In vivo studies were designed to assess the extent of Micronucleus Assay, Comet Assay under the exposure of common heavy-metal compounds, namely, Chromium Nitrate, using Catla catla (2n = 20), as a test model. The laboratory acclimatized fishes were divided into four groups. Group I served as positive control and the other three as exposed group...

  17. Reproductive toxicological aspects of chromium in males

    International Nuclear Information System (INIS)

    To expand our present understanding of the effects of chromium on male fertility a number of studies were designed to achieve this through the use of chromium intoxicated experimental animals and through investigation of sexual hormones and sperm quality in welders. Also in view of the lack of an experimental model for effects of noxious substance on the epididymal spermatozoa the main objectives of the series of studies reviewed here were: A. To establish a model for evaluation of epididymal sperm count and motility in the rat. B. To investigate and compare the effects of tri- and hexavalent chromium on epididymal spermatozoa. Further to describe the effects of low-dose long-time exposure of rats to the most toxicological interesting chromium oxidative state - hexavalent chromium. C. By the use of autoradiography and γ-countinuing to expand the present knowledge on the distribution of chromium in the body with special reference to the male reproductive organs. D. To describe the effects of exposure to hexavalent chromium in welding fume on levels of sexual hormones and semen parameters in welders. (EG)

  18. Quantitative Analysis of Trace Chromium in Blood Samples. Combination of the Advanced Oxidation Process with Catalytic Adsorptive Stripping Voltammetry

    OpenAIRE

    Yong, Li; Armstrong, Kristie C.; Dansby-Sparks, Royce N.; Carrington, Nathan A.; Chambers, James Q.; Xue, Zi-Ling

    2006-01-01

    A new method for pretreating blood samples for trace Cr analysis is described. The Advanced Oxidation Process (AOP with H2O2 and 5.5-W irradiation for 60 min) is used to remove biological/organic species for subsequent analysis. Prior to the AOP pretreatment, acid (HNO3) is used at pH 3.0 to inhibit the enzyme catalase in the blood samples. Catalytic Adsorptive Stripping Voltammetry (CAdSV) at a bismuth film electrode (BiFE) gives Cr concentration of 6.0 ± 0.3 ppb in the blood samples. This c...

  19. Oral exposure of mice to cadmium (II), chromium (VI) and their mixture induce oxidative- and endoplasmic reticulum-stress mediated apoptosis in the livers.

    Science.gov (United States)

    Jin, Yuanxiang; Zhang, Songbin; Tao, Runhua; Huang, Jie; He, Xingzhi; Qu, Lanya; Fu, Zhengwei

    2016-06-01

    Health concerns regarding the environmental heavy metals in wildlife and humans have increased in recent years. We evaluated the effects of exposure of mice to low doses of cadmium (Cd), chromium (Cr) and their mixtures on oxidative- and ER-stress. Male adult mice were orally exposed to Cd (0.5 and 2 mg kg(-1) ), Cr (1 and 4 mg kg(-1) ) and binary Cd+Cr mixtures (0.25 + 05 and 1 + 2 mg kg(-1) ) daily for 36 days. We observed that the bioaccumulation of Cd and Cr in the liver in a dose-dependent manner, and the Cd and Cr contents in the 2 mg kg(-1) Cd and 4 mg kg(-1) Cr treated groups reached 2.43 and 3.46 µg g(-1) liver weight. In addition, treatments with 2 mg kg(-1) Cd, 4 mg kg(-1) Cr or their mixture (1 + 2 mg kg(-1) ) significantly decreased body and liver weights, increased the levels of reactive oxygen species (ROS), malondialdehyde (MDA) and activities of catalase (CAT) and glutathione peroxidase (GPX) in the liver. Moreover, Cd and Cr exposures also elevated the transcription of the oxidative- and endoplasmic reticulum (ER)-stress related genes including Cat, Gpx, heme oxygenase 1 (Ho-1), regulated protein 78 (Grp78), activating transcription factor 6 (Atf6) and proaoptotic CCAAT/-enhancer-binding protein homologous protein (Chop) in a dose dependent manner in the liver. And hepatic cytochrome c levels increased in all Cd, Cr or their mixture treated groups. Furthermore, the transcriptional status and the activities of Caspase 9 and Caspase 3 were increased significantly in the liver when exposed to high doses of Cd, Cr or their mixture. These results suggested that a long period exposure of mice to Cd or Cr has the potential to elicit oxidative- and ER-stress mediated apoptosis in their livers. © 2014 Wiley Periodicals, Inc. Environ Toxicol 31: 693-705, 2016. PMID:25409916

  20. Chromium Oxidation State in Planetary Basalts: Oxygen Fugacity Indicator and Critical Variable for Cr-Spinel Stability

    Science.gov (United States)

    Bell, A. S.; Burger, P. V.; Le, Loan; Papike, J. J.; Jone, J.; Shearer, C. K.

    2014-01-01

    Cr is a ubiquitous and relatively abundant minor element in basaltic, planetary magmas. At the reduced oxidation states (spinel, clinopyroxene, and olivine. However, understanding the Cr valence in quenched melts has historically been plagued with analytical issues, and only recently has reliable methodology for quantifying Cr valence in quenched melts been developed. Despite this substantial difficulty, the pioneering works of Hanson and Jones and Berry and O'Neill provided important insights into the oxidation state of Cr in in silicate melts. Here we present a series of 1-bar gas mixing experiments performed with a Fe-rich basaltic melt in which have determined the Cr redox ratio of the melt at over a range of fO2 values by measuring this quantity in olivine with X-ray Absorption Near Edge Spectroscopy (XANES). The measured Cr redox ratio of the olivine phenocrysts can be readily converted to the ratio present in the conjugate melt via the ratio of crystal-liquid partition coefficients for Cr3+ and Cr2+. We have applied these results to modeling Cr spinel stability and Cr redox ratios in a primitive, iron-rich martian basalt.

  1. Oxide dispersion strengthened ferritic alloys. 14/20% chromium: effects of processing on deformation texture, recrystallization and tensile properties

    International Nuclear Information System (INIS)

    The ferritic oxide dispersion strengthened alloys are promising candidates for high temperature application materials, in particular for long life core components of advanced nuclear reactors. The aim of this work is to control the microstructure, in order to optimise the mechanical properties. The two ferritic alloys examined here, MA956 and MA957, are obtained by Mechanical Alloying techniques. They are characterised by quite anisotropic microstructure and mechanical properties. We have investigated the influence of hot and cold working processes (hot extrusion, swaging and cold-drawing) and recrystallization heat treatments on deformation textures, microstructures and tensile properties. The aim was to control the size of the grains and their anisotropic shape, using recrystallization heat treatments. After consolidation and hot extrusion, as-received materials present a extremely fine microstructure with elongated grains and a very strong (110) deformation texture with single-crystal character. At that stage of processing, recrystallization temperature are very high (1450 degrees C for MA957 alloy and 1350 degrees C for MA956 alloy) and materials develop millimetric recrystallized grains. Additional hot extrusion induce a fibre texture. Cold-drawing maintains a fibre texture, but the intensity decreases with increasing cold-work level. For both materials, the decrease of texture intensities correspond to a decrease of the recrystallization temperatures (from 1350 degrees C for a low cold-work level to 750 degrees C for 60 % cold-deformation, case of MA956 alloy) and a refinement of the grain size (from a millimetric size to less than an hundred of micrometer). Swaging develop a cyclic component where the intensity increases with increasing deformation in this case, the recrystallization temperature remains always very high and the millimetric grain size is slightly modified, even though cold-work level increases. Technologically, cold-drawing is the only way

  2. Reduction of Chromium-VI by Chromium Resistant Lactobacilli: A Prospective Bacterium for Bioremediation

    OpenAIRE

    Mishra, Ritesh; Sinha, Vartika; Kannan, Ambrose; Upreti, Raj K.

    2012-01-01

    Chromium is a toxic heavy metal, which primarily exists in two inorganic forms, Cr (VI) and Cr (III). Highly soluble hexavalent chromium is carcinogenic due to its oxidizing nature. It is well established that the intestinal bacteria including Lactobacilli have regulatory effect on intestinal homeostasis and a breakdown in the relationship between intestinal cells and bacteria results in the manifestation of gastrointestinal (GI) disorders. In this study Cr (VI) resistance was developed in La...

  3. Heat resistance of carbon steel with chromium-based gas-thermal sprayed coatings

    International Nuclear Information System (INIS)

    Heat resistance of steel with chromium-base plasma sprayed coating is studied in comparison with chromium coating and base material. The specimens were oxidized at the air under 1250 K during 48 h. Investigations into steel-chromium coating interface were carried out and the structure of cinder was studied. Refs. 7, figs. 2

  4. Speciation dependent radiotracer studies on chromium preconcentration using iron doped calcium alginate biopolymer

    International Nuclear Information System (INIS)

    The work aims to study the differential attitude of Ca-alginate (CA) and Fe-doped calcium alginate (Fe-CA) and towards Cr(III) and Cr (IV) so that, depending on the oxidation state of chromium effluent, environmentally sustainable methodologies can be prescribed for removal of chromium. Throughout the experiment 51Cr has been used as the precursor of stable chromium

  5. The enriched chromium neutrino source for GALLEX

    International Nuclear Information System (INIS)

    The preparation and study of an intense source of neutrinos in the form of neutron irradiated materials which are enriched in Cr-50 for use in the GALLEX solar neutrino experiment are discussed. Chromyl fluoride gas is enriched in the Cr-50 isotope by gas centrifugation and subsequently converted to a very stable form of chromium oxide. The results of neutron activation analyses of such chromium samples indicate low levels of any long-lived activities, but show that short-lived activities, in particular Na-24, may be of concern. These results show that irradiating chromium oxide enriched in Cr-50 is preferable to irradiating either natural chromium or argon gas as a means of producing a neutrino source to calibrate the GALLEX detector. These results of the impurity level analysis of the enriched chromyl fluoride gas and its conversion to the oxide are also of interest to work in progress by other members of the Collaboration investigating an alternative conversion of the enriched gas to chromium metal. 35 refs., 12 figs., 5 tabs

  6. Stabilization and solidification of chromium-contaminated soil

    Energy Technology Data Exchange (ETDEWEB)

    Cherne, C.A.; Thomson, B.M. [Univ. of New Mexico, Albuquerque, NM (United States). Civil Engineering Dept.; Conway, R. [Sandia National Labs., Albuquerque, NM (United States)

    1997-11-01

    Chromium-contaminated soil is a common environmental problem in the United States as a result of numerous industrial processes involving chromium. Hexavalent chromium [Cr(VI)] is the species of most concern because of its toxicity and mobility in groundwater. One method of diminishing the environmental impact of chromium is to reduce it to a trivalent oxidation state [Cr(III)], in which it is relatively insoluble and nontoxic. This study investigated a stabilization and solidification process to minimize the chromium concentration in the Toxicity Characteristic Leaching Procedure (TCLP) extract and to produce a solidified waste form with a compressive strength in the range of 150 to 300 pounds per square inch (psi). To minimize the chromium in the TCLP extract, the chromium had to be reduced to the trivalent oxidation state. The average used in this study was an alluvium contaminated with chromic and sulfuric acid solutions. The chromium concentration in the in the in situ soil was 1212 milligrams per kilogram (mg/kg) total chromium and 275 mg/kg Cr(VI). The effectiveness of iron, ferrous sulfate to reduce Cr(VI) was tested in batch experiments.

  7. Surface redox properties of lanthanum chromium nickel oxide, lanthanum strontium cobalt oxide, and silver explored via in-situ x-ray photoelectron spectroscopy

    Science.gov (United States)

    Vovk, Gregory

    The surface redox properties of LaCr0.6Ni0.4O 3 (powder), La0.5Sr0.5CoO3 (thin film) and silver (powder) were investigated using X-ray photoelectron spectroscopy (XPS). In order to control the oxidation state of a sample in ultra high vacuum (UHV) conditions, it was incorporated as the working electrode in a solid state electrochemical cell with the following configuration: (sample|YSZ|Pd:PdO)), where YSZ is 8 mol% yttria-stabilized zirconia, an oxide ion conducting electrolyte and Pd:PdO is a palladium-palladium oxide powder mixture serving as the reference electrode and an oxygen reservoir. Reduction/oxidation of the sample was initiated by applying an external bias voltage to the sample. It was found that the surface of LaCr0.6Ni0.4O 3 and LaNiO3 powders could be reversibly reduced and oxidized electrochemically to changes involving La, Cr, Ni, and to a lesser extent, O surface atoms. Binding energy shifts (with respect to the La 3d5/2 peak) were seen for the Cr 2p, Ni 3p, and O 1s peaks. The La 3d peaks did not shift noticeably upon reduction, but did exhibit La 3d5/2 parent:satellite ratio changes. The reduced surfaces of LaCr0.6Ni 0.4O3 and LaNiO3 were found to be active in adsorbing CO2, an indication of the increased Lewis basicity of these surfaces upon electrochemical reduction. La0.5Sr0.5CoO3 thin films displayed similar La 3d5/2 parent:satellite ratio changes as to those seen on LaCr0.6Ni0.4O3 and LaNiO3. The electronic behavior of the B-cation, Co, showed localized electronic changes. Furthermore, the surface stoichiometry of La0.5Sr0.5CoO 3 was rich in La and Sr and displayed irreversible binding energy changes in the Sr 3d and O 1s XPS signals. Two different species of oxygen and strontium were always present on the La0.5Sr0.5CoO3 surface. Ag showed reversible changes to O 1s XPS binding energy shifts and amounts. Although this behavior is in agreement with previous reports, the results were complicated by the reversible movement of sodium arising

  8. Determinação de rotina do crômio em fezes, como marcador biológico, pelo método espectrofotométrico ajustado da 1,5-difenilcarbazida The spectrophotometric method on the routine of 1,5-diphenylcarbazide was adjusted on chromium determination in feces, after its utilization as a biological marker as chromium (III oxide

    Directory of Open Access Journals (Sweden)

    Hermann Bremer Neto

    2005-06-01

    Full Text Available O objetivo deste estudo foi ajustar o método espectrofotométrico da 1,5-difenilcarbazida à determinação do crômio em fezes, como marcador biológico, adequando-o à rotina laboratorial. Fatores que poderiam exercer interferência na transformação do crômio (III à crômio (VI foram testados, como a recuperação do metal, quantidade de amostra, quantidade e ordem de emprego dos ácidos oxidantes da digestão úmida, temperatura e tempo de digestão e perda por volatilização do crômio como cloreto de cromila, porém não se determinou estatisticamente interferência destes fatores. No método ajustado, a amostra é digerida pela clássica mistura ácida nítrica/perclórica, levando a oxidação do crômio (III a crômio (VI, e alíquota do extrato diluído é usado para reação com 1,5-difenilcarbazida; as absorbâncias são medidas a 550nm, utilizando-se de cubetas de um centímetro de caminho óptico, contra prova em branco conduzida simultaneamente. Dicromato de potássio foi empregado como substância de referência para obtenção da curva padrão na faixa de 0,25 - 2,5mg.mL-1 de Cr2O3 (1mg Cr2O3 º 1,9355mg K2Cr2O7.This work aims at adjusting the spectrophotometric method of 1,5-diphenylcarbazide for the determination of chromium in feces, as a biological marker. Factors that could interfere with the transformation of chromium (III into chromium (VI were tested, as the metal recovery, the sample amount, the amount and the order of use of the oxidant acids of the wet digestion, digestion temperature and digestion time, loss of chromium by volatilization as chromyl chlorid. However the interference of these factors were not statistically determined. In the adjusted method, the sample is classically digested by nitric/perchloric acid mixture leading to the oxidation of chromium (III to chromium (VI, and an aliquot of the diluted extract is used for reaction with 1,5-diphenylcarbazide; absorbance was measured at 550nm, using 1cm

  9. Analysing the chromium-chromium multiple bond using multiconfigurational quantum chemistry

    OpenAIRE

    Brynda, Marcin; Gagliardi, Laura; Roos, Björn O.

    2009-01-01

    This Letter discusses the nature of the chemical bond between two chromium atoms in different di-chromium complexes with the metal atoms in different oxidation states. Starting with the Cr diatom, with its formally sextuple bond and oxidation number zero, we proceed to analyse the bonding in some Cr(I)–Cr(I) XCrCrX complexes with X varying from F, to Phenyl, and Aryl. The bond distance in these complexes varies over a large range: 1.65–1.83 Å and we suggest explanations for these variations. ...

  10. Hair chromium concentration and chromium excretion in tannery workers.

    OpenAIRE

    Saner, G; Yüzbasiyan, V; Cigdem, S

    1984-01-01

    Hair and urine samples were collected from 34 male tannery workers and from 12 normal adults. Eighteen of the workers dealt directly with chromium and the remaining 16 (controls) worked in the offices and kitchen of the same factory. All were found to be clinically healthy. Chromium was determined by flameless atomic absorption spectroscopy. When compared with normal adult values, urinary chromium concentration, Cr/Creatinine ratio, daily chromium excretion, and hair chromium, concentrations ...

  11. High-Purity Chromium Targets

    OpenAIRE

    Rudoy, A.; Milman, Yu.; Korzhova, N.

    1995-01-01

    A procedure for producing large-scale chromium ingots by means of induction-arc melting was developed. From the high-purity, low-alloyed chromium ingots obtained, chromium targets were produced by of thermoplastic treatment techniques. The method of electron-beam evaporation of high-purity chromium was also used for production of targets.

  12. Structure and morphology studies of chromium film at elevated temperature in hypersonic environment

    Indian Academy of Sciences (India)

    G M Hegde; V Kulkarni; M Nagaboopathy; K P J Reddy

    2012-06-01

    This paper presents the after shock heated structural and morphological studies of chromium film coated on hypersonic test model as a passive drag reduction element. The structural changes and the composition of phases of chromium due to shock heating (2850 K) are characterized using X-ray diffraction studies. Surface morphology changes of chromium coating have been studied using scanning electron microscopy (SEM) before and after shock heating. Significant amount of chromium ablation and sublimation from the model surface is noticed from SEM micrographs. Traces of randomly oriented chromium oxides formed along the coated surface confirm surface reaction of chromium with oxygen present behind the shock. Large traces of amorphous chromium oxide phases are also observed.

  13. Investigation of steam oxidation behaviour of TP347H FG Part 2: Exposure at 91 bar

    DEFF Research Database (Denmark)

    Jianmin, J; Montgomery, Melanie; Larsen, OH; Jensen, Søren Aakjær

    2005-01-01

    investigated using light optical and scanning electron microscopy. The oxide present on the specimens is a duplex oxide with an inner chromium rich oxide and an outer iron rich oxide. The inner oxide consisted of a primary iron chromium nickel oxide in the original alloy grain and a chromium rich oxide...

  14. Effects of UV light and chromium ions on wood flavonoids

    International Nuclear Information System (INIS)

    The individual and simultaneous effect of UV light and chromium ions was investigated by spectrophotometric methods on inert surfaces impregnated with quercetin or robinetin. The UV-VIS spectra of the silica gel plates impregnated with these flavonoids were modified characteristically after irradiating ultraviolet light. Even a half an hour of irradiation has caused irreversible changes in the molecule structure. A certain chemical - presumably complexation - was concluded from the change of spectral bands assigned to flavonoids when impregnated with chromic ions. Hexavalent chromium caused more complex changes in the absorption spectra. The differences in the spectra could indicate either the oxidation and decomposition of flavonoids, or some kind of coordination process and the reduction of hexavalent chromium. The simultaneous application of UV light and chromium ions caused more pronounced effects. The complexation process between chromium(III) and flavonoid was completed

  15. Biosorption potency of Aspergillus niger for removal of chromium (VI).

    Science.gov (United States)

    Srivastava, Shaili; Thakur, Indu Shekhar

    2006-09-01

    Aspergillus niger isolated from soil and effluent of leather tanning mills had higher activity to remove chromium. The potency of Aspergillus niger was evaluated in shake flask culture by absorption of chromium at pH 6 and temperature 30 degrees C. The results of the study indicated removal of more than 75% chromium by Aspergillus niger determined by diphenylcarbazide colorimetric assay and atomic absorption spectrophotometry after 7 days. Study of microbial Cr(VI) reduction and identification of reduction intermediates has been hindered by the lack of analytical techniques that can identify the oxidation state with subcellular spatial resolution. Therefore, removal of chromium was further substantiated by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX), which indicated an accumulation of chromium in the fungal mycelium. PMID:16874547

  16. Chromium(III) and chromium(VI) surface treated galvanized steel for outdoor constructions: environmental aspects.

    Science.gov (United States)

    Lindström, David; Hedberg, Yolanda; Odnevall Wallinder, Inger

    2010-06-01

    The long-term degradation of chromium(III) (Zn-Cr(III)) and chromium(VI)-based (Zn-Cr(VI)) surface treatments on galvanized steel and their capacities to hinder the release of zinc induced by atmospheric corrosion at nonsheltered urban and marine exposure conditions for 2 years are investigated. Compared to bare zinc sheet, both surface treatments revealed high corrosion protection abilities and capacities to hinder the release of zinc, still evident after 2 years of exposure. The zinc barrier properties of the thinner Zn-Cr(VI) (10 nm) treatment were during the first 100 days of urban exposure slightly improved compared with Zn-Cr(III) (35 nm). However, their long-term protection capacities were inverse. Released concentrations of total chromium correspond to annual release rates less than 0.000032 (Zn-Cr(III)) and 0.00014 g Cr m(-2) yr(-1) (Zn-Cr(VI)) after 1 year of urban exposure. Aging by indoor storage of the surface treatments prior to outdoor exposure reduced the released Cr concentrations from the surface treatments. No Cr(VI) was released from the aged surfaces but from the freshly exposed Zn-Cr(VI). Marine exposure conditions resulted in a faster reduction of chromate to chromium(III)oxide compared with urban conditions, and a significantly lower amount of both chromium(III) and chromium(VI) released from Zn-Cr(VI) at the marine site compared with the urban site. PMID:20462267

  17. Substoichiometric extraction of chromium

    International Nuclear Information System (INIS)

    Substoichiometric extraction of chromium with tetraphenylarsonium chloride (TPACl), tri-n-octylamine (TNOA), diethylammonium diethyldithiocarbamate (DDDC) and ammonium pyrrolidinedithiocarbamate (APDC) was examined in detail. Chromium can be extracted substoichiometrically in a pH range, which is 1.1-2.6 for the TPACl compound, 0.6-2.3 for the TNOA compound, 5.1-6.4 for the DDDC chelate and 3.9-4.9 for the APDC chelate. Chromium in high-purity calcium carbonate, Orchard Leaves (NBS SRM-1571) and Brewers Yeast (NBS SRM-1569) was determined by neutron activation analysis combined with substoichiometric extraction by DDDC and APDC. The values of 2.0+-0.02 ppm and 2.6+-0.2 ppm were obtained for Brewers Yeast and Orchard Leaves, respectively. These values were in good agreement with those reported by NBS. The reaction mechanism and the reaction ratio between hexavalent chromium and dithiocarbamate are also discussed. (author)

  18. Chromium in diet

    Science.gov (United States)

    ... Chromium deficiency may be seen as impaired glucose tolerance. It occurs in older people with type 2 ... PhD, and the A.D.A.M. Editorial team. Related MedlinePlus Health Topics Minerals Browse the Encyclopedia ...

  19. The carcinogenicity of chromium

    OpenAIRE

    Norseth, Tor

    1981-01-01

    The carcinogenicity of chromium compounds is reviewed with specific attention to the gaps in knowledge for risk estimation and research needs. The most important problems at present are whether trivalent chromium compounds cause cancer, and whether there is a difference in cancer causing effects between the soluble and the slightly soluble hexavalent compounds in the practical exposure situation. Dose estimates for risk estimation based on epidemiological investigations are also lacking. Pres...

  20. Propriedades texturais e catalíticas de óxidos de ferro contendo cromo e cobre Textural and catalytic properties of chromium and copper-doped iron oxides

    Directory of Open Access Journals (Sweden)

    Marluce Oliveira da Guarda Souza

    1998-07-01

    Full Text Available Chromium and copper-doped hematites were prepared with the aim of studying the synergistic effect of these dopants on the textural and on the catalytic properties of the iron oxides towards the high temperature shift reaction. It was found that the most active catalysts were those with the highest amount of copper. They had the Fe(II/Fe(III ratio near the stoichiometric value of magnetite, the highest surface areas under the reactional atmosphere and the greatest tendency to produce the active form; they also were poorly crystalline solids. The best performance was shown by the catalyst with Fe/Cu=10, heated at 300ºC. It can thus be concluded that copper acts both as textural and structural promoter in these catalysts.

  1. BIOSORPTION OF CHROMIUM (VI) FROM INDUSTRIAL EFFLUENT BY WILD ANDMUTANT TYPE STRAIN OF SACCHAROMYCES CEREVISIAE AND ITS IMMOBILIZED FORM

    OpenAIRE

    K Selvam, K Arungandhi, B Vishnupriya, T Shanmuga priya and M Yamuna

    2013-01-01

    Biosorption of chromium was studied by wild type Saccharomyces cerevisiae strain, mutant strain, immobilized-wild type and mutant strain. Chromium absorption pattern was observed in all experimental conditions. Hexavalent chromium (VI) was analyzed by diphenyl carbazide method, by oxidizing the trivalent chromium (III). The percentage efficiency of wild type S. cerevisiae and its mutant strain, immobilized-wild type and mutant strain were 94.8%, 98.7%, 97.4% and 100% respectively. S. cerevisi...

  2. The role of carbon and chromium on the mechanical and oxidation behavior of nickel-base alloys in high temperature water

    International Nuclear Information System (INIS)

    Constant extension rate testing of controlled-purity nickel-base alloys in argon and high purity, deaerated water at 360 degrees C, have shown that the degree of intergranular cracking (IG) increases as the bulk chromium content and carbon in solution decrease. Constant load testing in argon at 360 degrees C and 430 degrees C have revealed that as the amounts of chromium and carbon in solution decrease, the creep rate increases. The occurrence of severe IG cracking in water correlates with a high steady state creep rate in Ar. This suggests that creep likely plays a role in the IG cracking behavior in water at 360 degrees C. Surface film analysis of a Ni-16Cr-9Fe alloy after exposure in 360 degrees C, deaerated, high purity water for 100 hours revealed that as the carbon in solution is decreased, Cr2O3 is favored. Increasing the Cr content of Ni-16Cr-9Fe-300wppmC to 30 atom % also promoted the formation of Cr2O3. Mechanistically, Cr and C improve the mechanical properties by increasing the creep resistance, while an increase in Cr most likely offers better protection from environmental degradation through the formation of Cr2O3

  3. Obtaining decorative chromium plating from trivalent chromium solutions

    OpenAIRE

    Óscar Javier Suárez García

    2010-01-01

    The present work was aimed at a qualitative evaluation, in the laboratory, of different alternatives for assembling and operating a trivalent chromium bath for decorative chromium plating. Different chromium concentration solutions and different complexing agents were used. The initial result of this analysis was that chloride, formate and acetate solutions produced the best results. Solution preparation conditions were evaluated: temperature, chromium III complex formation time and also ...

  4. Chromium reduction from slag on electromelting of stainless steel

    International Nuclear Information System (INIS)

    Specific features of chromium reduction from the slag on electromelting of stainless steel type Kh18N10T according to one- or two-slag procedure were studied. It was shown that one-slag melting technology allows double decrease of chromium losses in the form of incompletely reduced oxides. This occurs due to additional chemical reactions between metal and slag on their combined pouring into the ladle. 1 ref.; 3 figs

  5. Contribution of photoelectron spectrometry and infrared spectrometry to the study of various oxidised forms of chromium

    International Nuclear Information System (INIS)

    Securate knowledge of internal surface of primary coolant circuits of PWR is required for an estimation of dissolution of used materials and for estimation of decontamination efficiency. The binding energies of various electron levels of chromium were determined by photoelectron spectrometry (ESCA), both for the metal and for certain compounds. Because of the intensities of the signals obtained the 2 p 3/2 level alone can be used for analytical purposes. Owing to a possible interference between this level due to hexavalent chromium and a satellite peak caused by trivalent chromium the method is not able to show up small amounts of chromium VI in chromium III. Simultaneous detection of the hexavalent and trivalent forms was achieved by infrared spectrometry. The problem of revealing traces of chromium VI in surface layers of trivalent chromium oxide has thus been solved

  6. Strategies for chromium bioremediation of tannery effluent.

    Science.gov (United States)

    Garg, Satyendra Kumar; Tripathi, Manikant; Srinath, Thiruneelakantan

    2012-01-01

    Bioremediation offers the possibility of using living organisms (bacteria, fungi, algae,or plants), but primarily microorganisms, to degrade or remove environmental contaminants, and transform them into nontoxic or less-toxic forms. The major advantages of bioremediation over conventional physicochemical and biological treatment methods include low cost, good efficiency, minimization of chemicals, reduced quantity of secondary sludge, regeneration of cell biomass, and the possibility of recover-ing pollutant metals. Leather industries, which extensively employ chromium compounds in the tanning process, discharge spent-chromium-laden effluent into nearby water bodies. Worldwide, chromium is known to be one of the most common inorganic contaminants of groundwater at pollutant hazardous sites. Hexavalent chromium poses a health risk to all forms of life. Bioremediation of chromium extant in tannery waste involves different strategies that include biosorption, bioaccumulation,bioreduction, and immobilization of biomaterial(s). Biosorption is a nondirected physiochemical interaction that occurs between metal species and the cellular components of biological species. It is metabolism-dependent when living biomass is employed, and metabolism-independent in dead cell biomass. Dead cell biomass is much more effective than living cell biomass at biosorping heavy metals, including chromium. Bioaccumulation is a metabolically active process in living organisms that works through adsorption, intracellular accumulation, and bioprecipitation mechanisms. In bioreduction processes, microorganisms alter the oxidation/reduction state of toxic metals through direct or indirect biological and chemical process(es).Bioreduction of Cr6+ to Cr3+ not only decreases the chromium toxicity to living organisms, but also helps precipitate chromium at a neutral pH for further physical removal,thus offering promise as a bioremediation strategy. However, biosorption, bioaccumulation, and

  7. Investigation of the surface composition of electrodeposited black chromium by X-ray photoelectron spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Survilienė, S., E-mail: sveta@ktl.mii.lt; Češūnienė, A.; Jasulaitienė, V.; Jurevičiūtė, I.

    2015-01-01

    Highlights: • Black chromium electrodeposited from a Cr(III) bath is composed of oxide, hydroxide and metallic chromium. • Metallic phase is absent in black chromium electrodeposited from a Cr(III) + ZnO bath. • The near-surface layer is rich in hydroxides, whereas oxides of both metals predominate in the depth of the coatings. - Abstract: The paper reviews black chromium electrodeposited from a trivalent chromium bath containing ZnO as a second main component. The chemical compositions of the top layers of the black chromium coatings were studied by the X-ray photoelectron spectroscopy method. The surface of black chromium was found to be almost entirely covered with organic substances. To gain information on the state of each element in the deposit bulk, the layer-by-layer etching of the black chromium surface with argon gas was used. Analysis of XPS spectra has shown that the top layers of black chromium without zinc are composed of various Cr(III) components, organic substances and metallic Cr, whereas metallic Cr is almost absent in black chromium containing some amount of Zn(II) compounds. The ratios of metal/oxide phases were found to be 10/27 and 2/28 for black chromium without and with zinc, respectively. It has been determined that owing to the presence of ZnO in the Cr(III) bath, the percentage of metallic chromium is substantially reduced in black chromium which is quite important for good solar selective characteristics of the coating. The results confirm some of earlier observations and provide new information on the composition of the near-surface layers.

  8. Investigation of the surface composition of electrodeposited black chromium by X-ray photoelectron spectroscopy

    International Nuclear Information System (INIS)

    Highlights: • Black chromium electrodeposited from a Cr(III) bath is composed of oxide, hydroxide and metallic chromium. • Metallic phase is absent in black chromium electrodeposited from a Cr(III) + ZnO bath. • The near-surface layer is rich in hydroxides, whereas oxides of both metals predominate in the depth of the coatings. - Abstract: The paper reviews black chromium electrodeposited from a trivalent chromium bath containing ZnO as a second main component. The chemical compositions of the top layers of the black chromium coatings were studied by the X-ray photoelectron spectroscopy method. The surface of black chromium was found to be almost entirely covered with organic substances. To gain information on the state of each element in the deposit bulk, the layer-by-layer etching of the black chromium surface with argon gas was used. Analysis of XPS spectra has shown that the top layers of black chromium without zinc are composed of various Cr(III) components, organic substances and metallic Cr, whereas metallic Cr is almost absent in black chromium containing some amount of Zn(II) compounds. The ratios of metal/oxide phases were found to be 10/27 and 2/28 for black chromium without and with zinc, respectively. It has been determined that owing to the presence of ZnO in the Cr(III) bath, the percentage of metallic chromium is substantially reduced in black chromium which is quite important for good solar selective characteristics of the coating. The results confirm some of earlier observations and provide new information on the composition of the near-surface layers

  9. Chromium in potatoes

    International Nuclear Information System (INIS)

    Chromium concentration in potatoes was determined, and tubes were labeled either intrinsically or extrinsically with radioactive chromate (51Cr). A labeled chromium complex was isolated from preparations of raw, baked, or fried potatoes and chromatographed on gel permeation media. Potato pulp and peel contained 1.63 and 2.70 μg of Cr/g tissue, respectively. There was no correlation between the two, nor did they respond similarly to changes of variety or locations. No significant differences were apparent in relative migration of the isolated complexes except between raw and cooked extrinsically labeled preparations

  10. Chromium isotope uptake in carbonates

    DEFF Research Database (Denmark)

    Rodler, Alexandra

    Chromium (Cr) is a redox sensitive element potentially capable of tracing fine-scale fluctuations of the oxygenation of Earth’s early surface environments and seawater. The Cr isotope composition of carbonates could perhaps be used as paleo-redox proxy to elucidate changes in the geological past....... Processes that potentially fractionate Cr isotopes, perhaps during deposition, burial and alteration need to be constrained.Previous studies have shown that Cr isotopes are fractionated during oxidative weathering on land, where heavy Cr isotopes are preferentially removed with Cr(VI) while residual soils...... retain an isotopically light Cr signature. Cr(VI) enriched in heavy Cr isotopes is then transported via river waters to the oceans and sequestered into marine sediments. Marine chemical sediments such asbanded iron formations and modern marine carbonates have proven useful in recording the Cr isotope...

  11. Characteristics of Aerosols Containing Chromium and Nickel From Some Thermal Spraying Operations

    OpenAIRE

    Bohgard, Mats; Welinder, Hans; Akselsson, Roland

    1983-01-01

    Characterization of aerosols, emitted from five methods of thermal spraying with materials containing chromium and nickel were carried out. The characterization procedure includes the determinations of the metal content, the particle size distribution, the oxidation state of chromium and a measure of the solubility of chromium. Three different kinds of samplers and the analytical methods PIXE (Particle Induced X-ray Emission analysis), ESCA (Electron Spectroscopy for Chemical Analysis), AAS (...

  12. Environmental optimization of chromium recovery from tannery sludge using a life cycle assessment approach

    OpenAIRE

    Kiliç, Eylem; Puig Vidal, Rita; Baquero Armans, Grau; Font Vallès, Joaquim; Colak, Selime; Gürler, Deniz

    2011-01-01

    Life cycle assessment (LCA) was used to evaluate the environmental impact of an oxidative chromium recovery method from tannery sludge, in comparison with the usual landfilling process. Three improvement options (water reduction, byproduct use and anaerobic sludge digestion) were considered. The results showed that the proposed chromium recovery process would be better environmentally than conventional landfilling in all the evaluated impact categories if the amount of chromium recovered w...

  13. Chromium and aging

    Science.gov (United States)

    Aging is associated with increased blood glucose, insulin, blood lipids, and fat mass, and decreased lean body mass leading to increased incidences of diabetes and cardiovascular diseases. Improved chromium nutrition is associated with improvements in all of these variables. Insulin sensitivity de...

  14. Contingency plans for chromium utilization. Publication NMAB-335

    International Nuclear Information System (INIS)

    The United States depends entirely on foreign sources for the critical material, chromium, making it very vulnerable to supply disruptions. This vulnerability results because chromium is essential for the fabrication of corrosion-resisting steels and high-temperature, oxidation-resisting alloys in applications that are vital to the nation's technological well-being; because no substitutes are known for these materials in those applications; and because the known, substantial deposits of chromite ore are only in a few geographical locations that could become inaccessible to the United States as a result of political actions. The effectiveness of programs such as stockpiling, conservation, and research and development for substitutes to reduce the impact of disruption of imports of chromite and ferrochromium are discussed. Alternatives for decreasing chromium consumption also are identified for chromium-containing materials in the areas of design, processing, and substitution

  15. High temperature oxidation resistant cermet compositions

    Science.gov (United States)

    Phillips, W. M. (Inventor)

    1976-01-01

    Cermet compositions are designed to provide high temperature resistant refractory coatings on stainless steel or molybdenum substrates. A ceramic mixture of chromium oxide and aluminum oxide form a coating of chromium oxide as an oxidation barrier around the metal particles, to provide oxidation resistance for the metal particles.

  16. BIOSORPTION OF CHROMIUM (VI FROM INDUSTRIAL EFFLUENT BY WILD ANDMUTANT TYPE STRAIN OF SACCHAROMYCES CEREVISIAE AND ITS IMMOBILIZED FORM

    Directory of Open Access Journals (Sweden)

    K Selvam, K Arungandhi, B Vishnupriya, T Shanmuga priya and M Yamuna

    2013-01-01

    Full Text Available Biosorption of chromium was studied by wild type Saccharomyces cerevisiae strain, mutant strain, immobilized-wild type and mutant strain. Chromium absorption pattern was observed in all experimental conditions. Hexavalent chromium (VI was analyzed by diphenyl carbazide method, by oxidizing the trivalent chromium (III. The percentage efficiency of wild type S. cerevisiae and its mutant strain, immobilized-wild type and mutant strain were 94.8%, 98.7%, 97.4% and 100% respectively. S. cerevisiae mutant strain and their immobilized form was found to be effective in biosorption of chromium (VI than the wild type forms.

  17. Effect of chromium oxide (III) nanoparticles on the production of reactive oxygen species and photosystem II activity in the green alga Chlamydomonas reinhardtii.

    Science.gov (United States)

    Costa, Cristina Henning da; Perreault, François; Oukarroum, Abdallah; Melegari, Sílvia Pedroso; Popovic, Radovan; Matias, William Gerson

    2016-09-15

    With the growth of nanotechnology and widespread use of nanomaterials, there is an increasing risk of environmental contamination by nanomaterials. However, the potential implications of such environmental contamination are hard to evaluate since the toxicity of nanomaterials if often not well characterized. The objective of this study was to evaluate the toxicity of a chromium-based nanoparticle, Cr2O3-NP, used in a wide diversity of industrial processes and commercial products, on the unicellular green alga Chlamydomonas reinhardtii. The deleterious impacts of Cr2O3-NP were characterized using cell density measurements, production of reactive oxygen species (ROS), esterase enzymes activity, and photosystem II electron transport as indicators of toxicity. Cr2O3-NP exposure inhibited culture growth and significantly lowered cellular Chlorophyll a content. From cell density measurements, EC50 values of 2.05±0.20 and 1.35±0.06gL(-1) Cr2O3-NP were obtained after 24 and 72h of exposure, respectively. In addition, ROS levels were increased to 160.24±2.47% and 59.91±0.15% of the control value after 24 and 72h of exposition to 10gL(-1) Cr2O3-NP. At 24h of exposure, the esterase activity increased to 160.24% of control value, revealing a modification of the short-term metabolic response of algae to Cr2O3-NP exposure. In conclusion, the metabolism of C. reinhardtii was the most sensitive to Cr2O3-NP after 24h of treatment. PMID:26803219

  18. Studies of chromium gettering

    International Nuclear Information System (INIS)

    Preliminary results have shown that hydrogen pumping by chromium is a surface effect. Unlike with titanium, the getter material used in many present day tokamaks, there is no significant diffusion into the bulk. Additional experiments have been carried out to measure the basic characteristics of chromium films for gases of interest in tokamak research. These gases include deuterium, oxygen and nitrogen. A vacuum system is described which allowed precise control of the test gas, a constant wall temperature and determination of the projected getter surface area. A quadrupole mass spectrometer, rather than simply a total pressure gauge, was utilized to measure the partial pressure of the test gas as well as the residual gas composition in the system. A quartz crystal monitor was used to measure film thickness. Pumping speeds and sticking coefficients are given as a function of surface coverage for each test gas. A comparison will be made with titanium films deposited in the same vacuum system and under similar conditions

  19. Effect of tritium on corrosion behavior of chromium in 0.01 N sulfuric acid solution

    International Nuclear Information System (INIS)

    The effects of tritium on the corrosion behavior of chromium in 0.01 N sulfuric solution have been investigated in the present study. Electrochemical experiments have been carried our for pure chromium. At first, the concentration dependence of sulfuric acid solution on anodic polarization behavior of chromium was experimented, resulting in that 0.01 N one was found appropriate. The dependence of both dissolved oxygen and tritium concentration on anodic behavior of chromium were performed. It was found from that the self-passivation of chromium induced by dissolved oxygen was inhibited in tritiated solution resulting in the enhancement of the corrosion. As a consequence it is highly likely that the elution of chromium by highly oxidative radiolysis products would explain the passivation inhibitory effect of SUS304 stainless steel observed in tritiated solutions

  20. Investigations of the oxidation-induced service life of chromium steels for high temperature fuel cell application (SOFC); Untersuchungen zur oxidationsbedingten Lebensdauer von Chromstaehlen fuer die Anwendung in der Hochtemperaturbrennstoffzelle (SOFC)

    Energy Technology Data Exchange (ETDEWEB)

    Ertl, S.T.

    2006-08-17

    The increasing energy consumption of future automobiles should be covered by a solid oxide fuel cell (SOFC) used as an additional energy supply (auxiliary power unit). The application of a SOFC with about 5 kW power in cars requires small size, low weight and an economic fabrication. To achieve this goal the interconnector and the metallic anode substrate (depending on an alternative concept of construction) should be manufactured out of thin Crofer22APU, a high chromium ferritic steel. The scale formation mechanisms on Crofer22APU sheets, wires and powder metallurgical produced foils of different thicknesses were investigated in several atmospheres of water vapour/hydrogen at 800 and 900 C, simulating the anode conditions. For scale characterization a number of conventional analysis techniques such as optical metallography, scanning electron microscopy and X-ray diffraction were used in combination with deflection testing in monofacial oxidation and two-stage oxidation studies using {sup 18}O and H{sub 2} {sup 18}O tracer. With these results a theoretical model for the determination of lifetime was developed for Crofer22APU components in simulated anode gas. It was found that the lifetime at a given temperature depends not only on the surface-to-volume ratio, but also on the geometry of the component (e.g. sheet or wire). The critical Cr content required for breakaway oxidation depends on microcrack formation in the surface oxide scale, which occurs on ridges of a sheet during thermal cycling. The development of a metallic interconnector and a metallic anode substrate requires measures to avoid interdiffusion between the alloy and the bordering nickel-YSZ (yttrium stabilized zirconia) cermet of the anode, or depending on the conception of the stack, the bordering nickel-YSZ cermet of the anode functional layer. Therefore the suitability of preoxidation layers after different preoxidation conditions was tested. It was found that the inhibition of the interdiffusion

  1. Kinetics and Mechanism of Paracetamol Oxidation by Chromium(VI) in Absence and Presence of Manganese(II) and Sodiumdodecyl Sulphate

    OpenAIRE

    Mohammed Ilyas; Maqsood Ahmad Malik; Syed Misbah Zahoor Andrabi; Zaheer Khan

    2007-01-01

    The kinetics of paracetamol oxidation are first order each in [paracetamol] and [HClO4]. The kinetic study shows that the oxidation proceeds in two steps. The effects of anionic micelles of sodiumdodecyl sulphate (SDS) and complexing agents (ethylenediammine tetraacetic acid (EDTA) and 2,2′-bipyridyl (bpy)) were also studied. Fast kinetic spectrophotometric method has been described for the determination of paracetamol. The method is based on the catalytic effect of manganese(II) on the ...

  2. Ion nitriding post-oxidation as an alternative technique to electrolytic chromium; Nitruracion post-oxidacion ionica como tecnica alternativa al cromado electrolitico

    Energy Technology Data Exchange (ETDEWEB)

    Diaz-Guillen, J. C.; Granda-Gutierrez, E.E.; Campa-Castilla, A.; Perez-Aguilar, S.I.; Garza-Gomez, A.; Candelas-Ramirez, J.; Mendez-Mendez, R. [COMIMSA. Corporacion Mexicana de Investigacion en Materiales S.A. de C.V., Saltillo, Coahuila (Mexico)]. E-mail: jcarlos@comimsa.com

    2010-11-15

    The effect of temperature and processing time during post-oxidation on hardness and corrosion resistance of AISI 1045 samples treated through nitriding and post-oxidation in a pulsed plasma discharge is evaluated in this paper. Also, a comparative analysis of the mechanical properties obtained with the dual nitriding - post oxidation process versus those properties of typical hard chrome coatings was performed with an aim to propose an alternative technique to the processes of galvanic coatings. The latter revealed that the process of ion nitriding and post-oxidation provides similar properties in hardness and improves the corrosion resistance compared to the hard chrome case. It is conclude that the technique of ion nitriding and post-oxidation is a non environmental harmful technology with strong potential to replace highly polluting electroplating techniques for application of hard chrome coatings. [Spanish] En el presente trabajo se evalua el efecto del tiempo y la temperatura de post-oxidacion sobre las propiedades de dureza y resistencia a la corrosion de muestras de acero AISI 1045 sometido al proceso de nitruracion post-oxidacion ionica en plasmas pulsados. Asi mismo, con el objetivo de fundamentar la propuesta de utilizacion de la nitruracion post-oxidacion ionica como una tecnica alternativa a los procesos galvanicos para aplicacion de recubrimientos de cromo duro, se realizo un analisis comparativo de propiedades, evidenciando que, mediante el proceso nitruracion postoxidacion ionica, es posible obtener caracteristicas similares en dureza y mejores en resistencia a la corrosion que las tipicas obtenidas para el cromo duro. Los resultados obtenidos permiten postular una tecnica que no dana al medio ambiente, como lo es la nitruracion post-oxidacion ionica, como candidata potencial para sustituir las tecnicas galvanicas altamente contaminantes para aplicacion de cromo duro.

  3. A Study of the High Temperature on Chromium Carbide

    International Nuclear Information System (INIS)

    The oxidation rates of chromium carbide have been measured at 900 to 1300 .deg. C and oxygen pressures between 2x10-2 8 x 10-2 Pa using thermogravimetric analysis method. Oxidation behavior of chromium carbide appeared to change very sensitively with both temperature and oxygen pressure. In case with the oxygen pressure lower than 8 x 10-2 Pa, the weight gain in the specimen due to the formation of chromium oxide occurred linearly with time at the every temperature studied, but when the oxygen pressure was increased up to 8 x 10-2Pa, the weight gain behavior versus time showed entirely different tendency. That is, in the temperature range of 900 .deg. C to 1000 .deg. C weight gain occurred, however in the range of 1000 .deg. C to 1300 .deg. C weight lost was observed. The reason for the observed linear kinetics could be inferred as follows. As the oxidation of carbide proceeded carbon monoxide would build up at the interface of the chromium oxide and carbide. If the equilibrium pressure of carbon monoxide at the interface exceeds the gas pressure at the outer specimen surface, the oxide scale formed on it might be cracked exposing new carbide sites on which oxidation could occur successively. Through a thermodynamic consideration it was judged that the above deduction was reasonable. On the other hand, the weight lost mentioned above was explained that it could occur mainly due to the further oxidation of Cr2O3 to the volatile CrO3 at the corresponding experimental conditions. Weight loss phenomenon mentioned before which was observed in the oxidation of chromium carbide was also clearified by X-ray diffraction method and SEM. That is, at 900 .deg. C stable oxide of chromium, (Cr2O3) was identified easily on the specimen surface. However, at 1300 .deg. C, only a few amount of this stable oxide could be found on to specimen surface, indicating Cr2O3 had been evaporated to CrO3 gas

  4. CHROMIUM, METABOLIC SYNDROME AND DIABESITY

    Science.gov (United States)

    Suboptimal intakes of the essential nutrient, chromium, are characterized by elevated blood glucose, insulin resistance, obesity, hypertriglyceridemia, and low HDL. These are also signs and symptoms of the metabolic syndrome. Improvements due to increased intake of chromium are related to the degr...

  5. Bioremediation of chromium solutions and chromium containing wastewaters.

    Science.gov (United States)

    Malaviya, Piyush; Singh, Asha

    2016-08-01

    Cr(VI) represents a serious threat to human health, living resources and ecological system as it is persistent, carcinogenic and toxic, whereas, Cr(III), another stable oxidation state of Cr, is less toxic and can be readily precipitated out of solution. The conventional methods of Cr(VI) removal from wastewaters comprise of chemical reduction followed by chemical precipitation. However, these methods utilize large amounts of chemicals and generate toxic sludge. This necessitates the need for devising an eco-technological strategy that would use the untapped potential of the biological world for remediation of Cr(VI) containing wastewaters. Among several viable approaches, biotransformation of Cr(VI) to relatively non-toxic Cr(III) by chromium resistant bacteria offers an economical- and environment-friendly option for its detoxification. Various studies on use of Cr(VI) tolerant viable bacterial isolates for treatment of Cr(VI) containing solutions and wastewater have been reported. Therefore, a detailed account of mechanisms and processes involved in bioreduction of Cr(VI) from solutions and wastewaters by bacterial isolates are the focus of this review article in addition to a discussion on toxicity of Cr(VI) on bacterial strains and various factors affecting Cr(VI) bioreduction. PMID:25358056

  6. A Comprehensive Review on Nickel (II) And Chromium VI Toxicities - Possible Antioxidant (Allium Sativum Linn) Defenses

    OpenAIRE

    Kusal K. Das

    2009-01-01

    The toxicity associated with nickel (II) and chromium (VI) is mainly due to generation of reactive oxygen species (ROS) with subsequent oxidative deterioration of biological macromolecules. Both nickel and chromium can generate free radicals (FR) directly from molecular oxygen in a two step process to produce superoxide anion and in continued process, produce highly toxic hydroxyl radical. The pro-oxidative effects are compounded by fact that they also inhibit antioxidant enzymes and deplete ...

  7. Anti-diabetic potential of chromium histidinate in diabetic retinopathy rats

    OpenAIRE

    Ulas, Mustafa; Orhan, Cemal; Tuzcu, Mehmet; Ozercan, Ibrahim Hanifi; Sahin, Nurhan; Gencoglu, Hasan; Komorowski, James R; Sahin, Kazim

    2015-01-01

    Background Chromium (Cr) is commonly used as a complementary medicine for diabetes mellitus. Several studies suggest that Cr intakes may improve glucose metabolism and decrease oxidative stress. Therefore, we aimed to assess the effects of chromium histidinate (CrHis) supplementation using a range of reliable biomarkers of oxidative damage and histopathological changes in rats with diabetic retinopathy. Methods Diabetes was induced with streptozotocin [(STZ), 55 mg/kg] by intraperitoneal inje...

  8. Oxidative release of chromium from Archean ultramafic rocks, its transport and environmental impact – A Cr isotope perspective on the Sukinda valley ore district (Orissa, India)

    DEFF Research Database (Denmark)

    Paulukat, Cora Stefanie; Døssing, Lasse Nørbye; Mondal, Sisir K.;

    2015-01-01

    negatively fractionated values as low as δ53Cr = −1.29 ± 0.04‰. Local surface waters are isotopically heavy relative to the soils. This supports the hypothesis that during oxidative weathering isotopically heavy Cr(VI) is leached from the soils to runoff. The impact of mining pollution is observed downstream...... transport to the sea. Isotopically lighter Cr(VI) downstream from the mine is probably back-reduced to Cr(III) during riverine transport leading to similar Cr-isotope values in the estuary as observed upstream from the mine....

  9. Hexavalent chromium and its effect on health: possible protective role of garlic (Allium sativum Linn).

    Science.gov (United States)

    Das, Kusal K; Dhundasi, Salim A; Das, Swastika N

    2011-01-01

    Hexavalent chromium or chromium (VI) is a powerful epithelial irritant and a confirmed human carcinogen. This heavy metal is toxic to many plants, aquatic animals, and bacteria. Chromium (VI) which consists of 10%-15% total chromium usage, is principally used for metal plating (H2Cr2O7), as dyes, paint pigments, and leather tanning, etc. Industrial production of chromium (II) and (III) compounds are also available but in small amounts as compared to chromium (VI). Chromium (VI) can act as an oxidant directly on the skin surface or it can be absorbed through the skin, especially if the skin surface is damaged. The prooxidative effects of chromium (VI) inhibit antioxidant enzymes and deplete intracellular glutathione in living systems and act as hematotoxic, immunotoxic, hepatotoxic, pulmonary toxic, and nephrotoxic agents. In this review, we particularly address the hexavalent chromium-induced generation of reactive oxygen species and increased lipid peroxidation in humans and animals, and the possible role of garlic (Allium sativum Linn) as a protective antioxidant. PMID:22865357

  10. Biosorption and biotransformation of chromium by Serratia sp. isolated from tannery effluent.

    Science.gov (United States)

    Srivastava, Shaili; Thakur, Indu Shekhar

    2012-01-01

    A bacterium isolated from soil and sediment ofa leather tanning mill's effluent was identified as Serratia sp. by the analysis of 16S rDNA. Scanning electron microscopy-energy dispersive X-ray analysis (SEM-EDX) and transmission electron microscopy (TEM) were used to assess morphological changes and confirm chromium biosorption in Serratia sp. both in a shake-flask culture containing chromium and in a tannery wastewater. The SEMEDX and the elemental analysis of the chromate-containing samples confirmed the binding of chromium with the bacterial biomass. The TEM exhibited chromium accumulation throughout the bacterial cell, with some granular deposits in the cell periphery and in the cytoplasm. X-ray diffraction analysis (XRD) was used to quantify the chromium and to determine the chemical nature of the metal-microbe interaction. The XRD data showed the crystalline character of the precipitates, which consisted of mainly calcium chromium oxide, chromium fluoride phosphate and related organo-Cr(III) complex crystals. The XRD data also revealed a strong involvement of cellular carboxyl and phosphate groups in chromium binding by the bacterial biomass. The results of the study indicated that a combined mechanism of ion-exchange, complexation, croprecipitation and immobilization was involved in the biosorption of chromium by bacterial cells in contaminated environments. PMID:22519094

  11. Role of paramagnetic chromium in chromium(VI)-induced damage in cultured mammalian cells.

    OpenAIRE

    Sugiyama, M

    1994-01-01

    Chromium(VI) compounds are known to be potent toxic and carcinogenic agents. Because chromium(VI) is easily taken up by cells and is subsequently reduced to chromium(III), the formation of paramagnetic chromium such as chromium(V) and chromium(III) is believed to play a role in the adverse biological effects of chromium(VI) compounds. The present report, uses electron spin resonance (ESR) spectroscopy; the importance of the role of paramagnetic chromium in chromium(VI)-induced damage in intac...

  12. Hot corrosion resistance of nickel-chromium-aluminum alloys

    Science.gov (United States)

    Santoro, G. J.; Barret, C. A.

    1977-01-01

    The hot corrosion resistance of nickel-chromium-aluminum alloys was examined by cyclically oxidizing sodium sulfate-coated specimens in still air at 900, 1000, and 1100 C. The compositions tested were within the ternary region: Ni, Ni-50 at.% Cr, and Ni-50 at.% Al. At each temperature the corrosion data were statistically fitted to a third order regression equation as a function of chromium and aluminum contents. From these equations corrosion isopleths were prepared. Compositional regions with the best hot corrosion resistance were identified.

  13. Oxidative release of chromium from Archean ultramafic rocks, its transport and environmental impact – A Cr isotope perspective on the Sukinda valley ore district (Orissa, India)

    International Nuclear Information System (INIS)

    Highlights: • Cr in lateritic soil profiles in Sukinda valley are partly highly negatively fractionated. • Oxidative weathering and mining operations affect the Cr isotope composition of the local surface water. • Isotopically heavy Cr from land is probably preserved during its transport to the sea. • The environmental impact of toxic Cr(VI) can potentially be diminished by microbial mats. - Abstract: This study investigates Cr isotope fractionation during soil formation from Archean (3.1–3.3 Ga) ultramafic rocks in a chromite mining area in the southern Singhbhum Craton (Orissa, India). The Cr-isotope signatures of two studied weathering profiles, range from non-fractionated mantle values to negatively fractionated values as low as δ53Cr = −1.29 ± 0.04‰. Local surface waters are isotopically heavy relative to the soils. This supports the hypothesis that during oxidative weathering isotopically heavy Cr(VI) is leached from the soils to runoff. The impact of mining pollution is observed downstream from the mine where surface water Cr concentrations are significantly increased, accompanied by a shift to less positive δ53Cr values relative to upstream unpolluted surface water. A microbial mat sample indicates that microbes have the potential to reduce and immobilize Cr(VI), which could be a factor in controlling the hazardous impact of Cr(VI) on health and environment. The positive Cr isotope signatures of the Brahmani estuary and coastal seawater collected from the Bay of Bengal further indicate that the positively fractionated Cr isotope signal from the catchment area is preserved during its transport to the sea. Isotopically lighter Cr(VI) downstream from the mine is probably back-reduced to Cr(III) during riverine transport leading to similar Cr-isotope values in the estuary as observed upstream from the mine

  14. Electrochemistry of active chromium. Part III. Effects of temperature

    Directory of Open Access Journals (Sweden)

    J. P. POPIC

    2003-11-01

    Full Text Available It was shown that the temperature in the range 20 – 65 ºC has considerable effects on the electrochemical anodic dissolution of chromium in the active potential range as well as on the electrochemical hydrogen evolution reactions on bare and oxide covered chromium surfaces. Also, the chemical dissolution of chromium is strongly affected. The apparent energy of activation for anodic dissolution is 63.1 kJ mol-1, for hydrogen evolution on a bare Cr surface 19.5 kJ mol-1, for the same reaction on an oxide covered surface 44.0 kJ mol-1 and for the chemical (“anomalous” dissolution 66.9 kJ mol-1. The temperature dependences of the total corrosion rate, and the electrochemical corrosion rate alone, are presented in polynomial forms with the appropriate constants obtained by the best fit of the experimental data. For the hydrogen evolution reaction on both bare and oxide covered chromium, the Volmer-Heyrovsky reaction mechanism with the second step as rate determining was proposed.

  15. New alloys to conserve critical elements. [replacing chromium in steels

    Science.gov (United States)

    Stephens, J. R.

    1978-01-01

    Previous studies and surveys on availability of domestic reserves have shown that chromium is a most critical element within the U.S. metal industry. More precisely, the bulk of chromium is consumed in the production of stainless steels, specifically Type 304 stainless steel (304SS) which contains 18% Cr. The present paper deals with means of reducing chromium in commercial stainless steels by substituting more abundant or less expensive elements with the intent of maintaining the properties of 304SS. The discussion focuses on some of the oxidation and corrosion properties of new substitute stainless steels with only 12% Cr, which represents a potential saving of 33% of the chromium consumed in the production of 304SS. The alloying elements substituted for Cr in 304SS are selected according to their potential for protective oxide formation during high-temperature oxidation; these are Al, Si, Ti, Y, and misch metal which is 99.7% rare-earth metals containing 50 to 55% cerium. Other alloying elements to impart corrosion resistance are Mn, Mo, and V.

  16. Fate and transport of chromium through soil

    International Nuclear Information System (INIS)

    Chromium chemistry relevant to the problem facing state of New Jersey (Usa) was examined. Transport of chromium through soil depends on its chemical forms. Transformation of chromium within bulk of soil depends on soil constituents, soil condition, such as pH, Eh and organic compounds applied onto soil or present in soil. Total chromium in soil can be determined. Speciation of chromium based on ionization, hydrolysis, complex formation, redox reactions and adsorption is predicted using MINIQ program

  17. Release of Chromium from Orthopaedic Arthroplasties

    OpenAIRE

    Afolaranmi, G.A.; Tettey, J; Meek, R.M.D; Grant, M.H

    2008-01-01

    Many orthopaedic implants are composed of alloys containing chromium. Of particular relevance is the increasing number of Cobalt Chromium bearing arthroplasies being inserted into young patients with osteoarthritis. Such implants will release chromium ions. These patients will be exposed to the released chromium for over 50 years in some cases. The subsequent chromium ion metabolism and redistribution in fluid and tissue compartments is complex. In addition, the potential biological effects o...

  18. Diminuição do teor de óxido de crômio (III usado como marcador externo Reduction in chromium (III oxide level as an external marker

    Directory of Open Access Journals (Sweden)

    Hermann Bremer Neto

    2003-04-01

    Full Text Available A sensibilidade do método espectrofotométrico da s-difenilcarbazida de determinação do crômio permite que esse metal possa ser determinado em teores e em massas de amostras tão pequenas que as concentrações atualmente usadas de óxido de crômio (III como marcador externo em ensaios biológicos poderiam ser drasticamente diminuídas. Utilizando-se do piauçu (Leporinus macrocephalus para um estudo sobre o coeficiente de digestibilidade aparente (CDA da fração protéica, seis níveis de óxido de crômio (III - 0,01% - 0,02% - 0,03% - 0,05% - 0,1% e 0,2% - foram incorporados em dietas isoprotéica e isoenergética, objetivando-se verificar se o cálculo do CDA seria afetado pela variação do teor do marcador. Os seis tratamentos foram dispostos em um delineamento em blocos inteiramente casualisados, sendo as fezes coletadas durante 16 dias. Verificou-se que os resultados do coeficiente de digestibilidade aparente da fração protéica não apresentaram diferenças estatísticas significativas devidas aos teores incorporados do marcador à ração e aos dias de coleta. Conseqüentemente, e em experimentos dessa natureza, nada impede que seja reduzido o teor de óxido de crômio (III ao menos até 0,01%: além da economia relativa ao consumo do mesmo e da facilidade na manipulação de menor quantidade de amostras de fezes, o método espectrofotométrico da s-difenilcarbazida permite dosar esse nível (e até menor do que 0,01% de modo simples e rápido, com precisão e exatidão.The objective of this study was to reduce the level of the biological marker Cr2O3 in animal diets, due to the sensibility of the sdiphenylcarbazide spectrophotometric method for chromium determination in feces, recently developed. Six levels of marker, chromium (III oxide (0.01% - 0.02% - 0.03% - 0.05% - 0.1% and 0.2%, were incorporated into isoproteic and isoenergetic diets, for the apparent digestibility assay of the "piauçu" (Leporinus macrocephalus, in a

  19. Internal Friction In The PFN Ceramics With Chromium Dopand

    OpenAIRE

    Zachariasz R.; Bochenek D.; Bruś B.

    2015-01-01

    An aim of this work was to determine an influence of an admixture, the chromium (for x from 0.01 to 0.06), on the mechanical properties of the PFN ceramics. The ceramics with chemical composition Pb(Fe0.5−xCrxNb0.5)O3 was synthesized in two steps from simple oxides PbO, Fe2O3, Nb2O5, Cr2O3. The first stage was based on obtaining the FeNbO4 from the Fe2O3 and Nb2O5 simple oxides. At this stage an admixture in a form the Cr2O3 chromium oxide was added to the solution. In the second stage the Pb...

  20. Chromium reduction in Pseudomonas putida.

    OpenAIRE

    Ishibashi, Y.; Cervantes, C; Silver, S

    1990-01-01

    Reduction of hexavalent chromium (chromate) to less-toxic trivalent chromium was studied by using cell suspensions and cell-free supernatant fluids from Pseudomonas putida PRS2000. Chromate reductase activity was associated with soluble protein and not with the membrane fraction. The crude enzyme activity was heat labile and showed a Km of 40 microM CrO4(2-). Neither sulfate nor nitrate affected chromate reduction either in vitro or with intact cells.

  1. Chromium reduction in Pseudomonas putida.

    Science.gov (United States)

    Ishibashi, Y; Cervantes, C; Silver, S

    1990-01-01

    Reduction of hexavalent chromium (chromate) to less-toxic trivalent chromium was studied by using cell suspensions and cell-free supernatant fluids from Pseudomonas putida PRS2000. Chromate reductase activity was associated with soluble protein and not with the membrane fraction. The crude enzyme activity was heat labile and showed a Km of 40 microM CrO4(2-). Neither sulfate nor nitrate affected chromate reduction either in vitro or with intact cells. PMID:2389940

  2. Determination of hexavalent chromium in cosmetic products by ion chromatography and postcolumn derivatization.

    Science.gov (United States)

    Kang, Eun Kyung; Lee, Somi; Park, Jin-Hee; Joo, Kyung-Mi; Jeong, Hye-Jin; Chang, Ih Seop

    2006-05-01

    Chromium hydroxide green [Cr(2)O(OH)(4)] and chromium oxide green (Cr(2)O(3)) are colouring agents for use in cosmetic products. These colourants may contain chromium (VI), which cause skin allergies through percutaneous adsorption on the skin. Eye shadow is a representative cosmetic product in which significant colourants are used. We analysed the chromium (VI) in the eye shadows by ion chromatography and post column derivatization. We optimize conditions of chromium (VI) analysis in eye shadows. During the pretreatment procedure, there are no exchange of chromium (III) to chromium (VI). This method has a limit of quantification for chromium (VI) of 1.0 microg l(-1), recovery rate of 100 +/- 3% and analysis time less than 10 min. This result is 300 times more sensitive than the high-performance liquid chromatography method. We applied the optimized method to analyse 22 eye shadows and 6 colouring agents. 2 out of 22 of the products contained more than 5 mg l(-1). In our previous work, 5 mg l(-1) of Cr represented a threshold level. There was much more Cr(VI) in the colouring agents. The Cr(VI) in one of the colouring agents was 97.6 mg l(-1). PMID:16689807

  3. Friction and wear behavior of chromium carbide coatings

    International Nuclear Information System (INIS)

    Chromium carbides, tungsten carbide, and chromium oxide have been tested and evaluated as coatings to protect high-temperature gas-cooled reactor (HTGR) steam generator and other HTGR components from adhesion, galling associated with sliding wear or from fretting. Tests were performed in commercially-pure helium and in helium doped with various gaseous impurities (H2, H2O, CH4, CO) to simulate the primary coolant of an HTGR. Several types of chromium carbide coatings including Cr3C2, Cr7C3, and Cr23C6, were tested for wear resistance and resistance to long-term spalling. Tungsten carbide and chromium oxide coatings were tested in sliding wear tests. Cr23C6-NiCr coatings showed the best performance (from 400 to 8160C) whether they were applied by detonation gun or plasma gun spraying methods. The presence of the Cr23C6-NiCr coatings did not affect the creep rupture properties of Alloy 800H substrates at temperatures up to 7600C. Low-cycle fatigue life of similar specimens at 5930C was reduced to 10 to 20% when tested in the 1 to 0.6% strain range

  4. Laboratory animals pulmonary clearance study with chromium 51 labelled polystyrene spherical particles: investigations for clinical application

    International Nuclear Information System (INIS)

    Polystyrene spherical particles labelled with chromium 51, retaining a small amount of chromium acetylacetonate, were administered through different ways to laboratory animals, mice, rats, dogs and monkeys, in order to work out a suitable technique for clinical investigations. The following results were obtained: radioactive labelling may be considered as stable because in vivo chromium elution from the particles does not exceed 0.1% daily. No short-term toxicity has been found for any of the ways of administration due to acetylacetonate or the particles themselves. Long-term pulmonary clearance of inhaled polystyrene particles is close to that of metallic oxides, and no detectable nuisance was observed

  5. Hydrogen permeation through chromium

    International Nuclear Information System (INIS)

    Steady state and non-steady state measurements of hydrogen permeation through metallic chromium are reported. The experiments have been conducted by use of hydrogen and deuterium within a pressure range of 10-8 - 1 bar and temperatures between 600 - 8000C. Numerical values for the physical quantities permeability, diffusion constant and solubility could be derived. At an upstream pressure above around 10-3 bar classical Sieverts-low was found (permeation rate proportional √p) with activation energies Qsub(perm) = 65 kJoule/mole, Qsub(Diff) = 4-8 kJoule/mole, Qsub(Sol) = 57-61 kJoule/mole for the respective processes involved. The isotopic effect between H and D of the permeabilities could be represented by a factor of 1,5 independence on temperature. All non steady-state measurements could be approximated reasonably well by classical diffusion kinetics. Below up-stream pressures of approx.= 10-7 bar the kinetics was no longer diffusion controlled, the dependence on up-stream pressure changed from √p -> p, the activation energy for permetation increased to 127 kJoule/mole and the isotopic factor resulted in about 2-3. (orig.)

  6. Intracellular chromium localization and cell physiological response in the unicellular alga Micrasterias

    OpenAIRE

    Volland, Stefanie; Lütz, Cornelius; Michalke, Bernhard; LÜTZ-MEINDL, URSULA

    2012-01-01

    Various contaminants like metals and heavy metals are constantly released into the environment by anthropogenic activities. The heavy metal chromium has a wide industrial use and exists in two stable oxidation states: trivalent and hexavalent. Chromium can cause harm to cell metabolism and development, when it is taken up by plants instead of necessary micronutrients such as for example iron. The uptake of Cr VI into plant cells has been reported to be an active process via carriers of essent...

  7. Deposition of chromium nitride coatings from vacuum arc plasma in increased nitrogen pressure

    International Nuclear Information System (INIS)

    The application of protective coatings on metal materials is the effective way to improve their durability. Chromium nitride coatings are applied mainly on tools due to good resistivity to oxidation compared to other metal nitride coatings and good wear resistance. Some characteristics of the coatings deposited in fixed position in regard of chromium cathode on the samples parallel directed to it and the other arranged opposite in the nitrogen pressure ranged from 0.5 to 3.0 Pa are investigated.

  8. Biliary excretion of chromium in the rat

    International Nuclear Information System (INIS)

    The relative amount of chromium excreted in rat bile after injection of Cr-III is much less than after injection of Cr-VI, about 0.1% and from 6-8% during 5 hours respectively, for corresponding dose levels. The liver to bile ratio was 50-100 for Cr-III injection for Cr-VI the ratio was 2-3. With doses up to 18 μmol Cr/kg, only Cr-III was found in bile even after injection of CR-VI.Glutathione depletion of the liver with cyclohexene oxide decreased chromium excretion in bile. Such treatment also decresed the reduction of Cr-VI to Cr-III in the liver cell as only Cr-VI was found in bile. A different distribution of Cr-III in the liver dependent on whether derived from Cr-VI or taken up by the liver as such must be assumed. Taking into account the usual low penetration of biological membranes by Cr-III, a possible active transport mechanism or a specific diffusable Cr-III compound must be postulated. (author)

  9. Trivalent chromium sorption on alginate beads

    OpenAIRE

    Araújo, M. Manuela; Teixeira, J.A.

    1997-01-01

    The applicability of trivalent chromium removal from aqueous solutions using calcium alginate beads was studied. The equilibrium isotherms were plotted at two temperatures. The relationship between the chromium sorbed and the calcium released was determined as well as the effect of alginate amount and initial pH on the equilibrium results. Chromium sorption kinetics were evaluated as a function of chromium initial concentration and temperature. Transport properties of trival...

  10. On texture formation of chromium electrodeposits

    DEFF Research Database (Denmark)

    Nielsen, Christian Bergenstof; Leisner, Peter; Horsewell, Andy

    1998-01-01

    The microstructure, texture and hardness of electrodeposited hard, direct current (DC) chromium and pulsed reversed chromium has been investigated. These investigations suggest that the growth and texture of hard chromium is controlled by inhibition processes and reactions. Further, it has been...

  11. Performance characteristics of mill rolls from graphite chromium cast iron

    OpenAIRE

    Lecomte-Beckers, Jacqueline; Terziev, L.; Breyer, J. P.

    2000-01-01

    The main requirements for the development of a new grade for the later finishing section of the mill are : good oxidation and thermal behaviour, high wear resistance, good resistance to rolling incidents. The approach of Marichal Ketin to improve the rolling performances in the last finishing stands is presented. The Hi-Cr cast iron possesses excellent wear resistance due to the presence of hard chromium carbides, but its thermal conductivity and sticking properties are fairly low. A graphite...

  12. Chromium Salen Mediated Alkene Epoxidation

    DEFF Research Database (Denmark)

    Petersen, Kaare Brandt; Norrby, Per-Ola; Daly, Adrian M.; Gilheany, Declan G.

    2002-01-01

    The mechanism of alkene epoxidation by chromium(v) oxo salen complexes has been studied by DFT and experimental methods. The reaction is compared to the closely related Mn-catalyzed process in an attempt to understand the dramatic difference in selectivity between the two systems. Overall, the......-spin surface. The low-spin addition of metal oxo species to an alkene leads to an intermediate which forms epoxide either with a barrier on the low-spin surface or without a barrier after spin inversion. Supporting evidence for this intermediate was obtained by using vinylcyclopropane traps. The chromium...

  13. Trivalent chromium removal from aqueous solutions by a sol–gel synthesized silica adsorbent functionalized with sulphonic acid groups

    Energy Technology Data Exchange (ETDEWEB)

    Gomez-Gonzalez, Sergio Efrain [Departamento de Ingeniería Química, Universidad de Guadalajara, Blvd. Marcelino García Barragán # 1421, esq. Calzada Olímpica, C.P. 44430 Guadalajara, Jalisco (Mexico); Carbajal-Arizaga, Gregorio Guadalupe [Departamento de Química, CUCEI, Universidad de Guadalajara, Blvd. Marcelino García Barragán # 1421, esq. Calzada Olímpica, C.P. 44430 Guadalajara, Jalisco (Mexico); Manriquez-Gonzalez, Ricardo [Departamento de Madera, Celulosa y Papel, CUCEI, Universidad de Guadalajara, Km 15.5, carretera Guadalajara-Nogales, Las Agujas, C.P. 45020 Zapopan, Jalisco (Mexico); De la Cruz-Hernandez, Wencel [Centro de Nanociencias y Nanotecnología, Universidad Nacional Autónoma de México, Km 107 carretera Tijuana-Ensenada, C.P. 22830 Ensenada, Baja California (Mexico); Gomez-Salazar, Sergio, E-mail: sergio.gomez@cucei.udg.mx [Departamento de Ingeniería Química, Universidad de Guadalajara, Blvd. Marcelino García Barragán # 1421, esq. Calzada Olímpica, C.P. 44430 Guadalajara, Jalisco (Mexico)

    2014-11-15

    Highlights: • Corpuscular sulphonic acid-functionalized silica holds improved uptake of chromium. • Mesopores on adsorbent facilitate (CH{sub 3}COO){sub 2}Cr{sup +} ion uptake on sulphonate sites. • Formation of chromium acetate sulphonate complex proposed from XPS results. • Fixed bed chromium uptake results suggest potential industrial use. - Abstract: A high capacity hybrid silica adsorbent was synthesized via sol–gel processing with sulphonic acid groups as trivalent chromium complex ions chelators from aqueous solutions. The synthesis included co-condensation of tetraethoxysilane (TEOS) with 3-(mercaptopropyl)trimethoxysilane (MPS), and oxidation of thiol to sulphonic acid groups. Chromium uptake kinetic, batch and fixed-bed experiments were performed to assess the removal of this metal from aqueous solutions. {sup 13}C, {sup 29}Si CPMAS NMR, FTIR, XPS were used to characterize the adsorbent structure and the nature of chromium complexes on the adsorbent surface. Chromium maximum uptake was obtained at pH 3 (72.8 mg/g). Elemental analysis results showed ligand density of 1.48 mmol sulphonic groups/g. About 407 mL of Cr(III) solution (311 mg/L) were treated to breakthrough point reaching ≤0.06 mg/L at the effluent. These results comply with USEPA regulation for chromium concentration in drinking water (≤0.1 mg/L). The adsorbent shows potential to be used in chromium separations to the industrial level.

  14. Trivalent chromium removal from aqueous solutions by a sol–gel synthesized silica adsorbent functionalized with sulphonic acid groups

    International Nuclear Information System (INIS)

    Highlights: • Corpuscular sulphonic acid-functionalized silica holds improved uptake of chromium. • Mesopores on adsorbent facilitate (CH3COO)2Cr+ ion uptake on sulphonate sites. • Formation of chromium acetate sulphonate complex proposed from XPS results. • Fixed bed chromium uptake results suggest potential industrial use. - Abstract: A high capacity hybrid silica adsorbent was synthesized via sol–gel processing with sulphonic acid groups as trivalent chromium complex ions chelators from aqueous solutions. The synthesis included co-condensation of tetraethoxysilane (TEOS) with 3-(mercaptopropyl)trimethoxysilane (MPS), and oxidation of thiol to sulphonic acid groups. Chromium uptake kinetic, batch and fixed-bed experiments were performed to assess the removal of this metal from aqueous solutions. 13C, 29Si CPMAS NMR, FTIR, XPS were used to characterize the adsorbent structure and the nature of chromium complexes on the adsorbent surface. Chromium maximum uptake was obtained at pH 3 (72.8 mg/g). Elemental analysis results showed ligand density of 1.48 mmol sulphonic groups/g. About 407 mL of Cr(III) solution (311 mg/L) were treated to breakthrough point reaching ≤0.06 mg/L at the effluent. These results comply with USEPA regulation for chromium concentration in drinking water (≤0.1 mg/L). The adsorbent shows potential to be used in chromium separations to the industrial level

  15. The fate of chromium during tropical weathering

    DEFF Research Database (Denmark)

    Berger, Alfons; Frei, Robert

    2014-01-01

    We performed a mineral, geochemical and Cr–Sr–Pb isotope study on a laterite profile developed on ca. 540 Ma old tonalitic bedrock in Madagascar with special emphasis on the behavior of chromium during tropical weathering. The observed strong depletions of Ca, Si, and P, and enrichment of Fe and Al...... weathering profile. The negatively fractionated δ53Cr values measured in the weathering profile relative to the unaltered tonalitic bedrock characterized by a high temperature magmatic inventory Cr isotope signature are consistent with loss of a positively fractionated Cr(VI) pool formed during weathering...... highly oxidative conditions, which in well drained sulfide-bearing parent bedrocks potentially lead to both, acid dissolution of sulfide-hosted Cr and redox-promoted mobilization of Cr(VI) from silicates during later stages of weathering under basic pH conditions....

  16. Microbial biotechnology for remediation of aquatic habitats polluted with chromium

    Directory of Open Access Journals (Sweden)

    Viorica Coşier

    2008-12-01

    Full Text Available Chromium may occur in nine different forms of oxidation ranging from ?II to +VI, with forms II, III and VI as the most commonly encountered. In Cluj county, chromium pollution dates well back in time and has caused important dysfunction to the mechanical-biological wastewater purification station of the city of Cluj (Coşier & Diţă 1996. The purpose of this study was to develop one microbial method able to reduce hexavalent chromium (mobile, permeable to cell membrane, carcinogenic and mutagenic (Ishikawa et al 1994 to the trivalent form (insoluble and an essential element for humans (Song et al 2006. Different sources of chromium-reducing bacteria and many sources of carbon and energy added to the Kvasnikov mineral basal medium (Komori et al 1990 with increasing amount of chromate (200- 1000 mg/l were tested. Two bacterial strains, able to reduce even 1000 mg chromate/l, were isolated in pure culture. For one of these bacterial strains, we determined the optimum conditions for the reduction of Cr (VI.

  17. Evaluation of chromium speciation and transport characteristics in the Hanford Site 100D and 100H areas

    Energy Technology Data Exchange (ETDEWEB)

    Thornton, E.C.; Amonette, J.E.; Olivier, J. [and others

    1995-08-01

    Field and laboratory investigations have been conducted to define the fate and transport characteristics of chromium contamination present in the 100D/H Areas of the Hanford Site. This information is relevant to assessing the impact of the release of hexavalent chromium to the Columbia River. Included in this study was the determination of the concentration and aqueous speciation of chromium in the unconfined acquifer and an assessment of potential changes in speciation as groundwater passes through the river/acquifer transition zone and mixes with the Columbia River. The results of this study indicate that chromium present within the Hanford acquifer is predominantly in the oxidized hexavalent state. Chromium is apparently stable in the oxidized form owing to its lack of organic matter within the acquifer. A portion of the chromium is removed as groundwater passes through the transition zone due to reduction and precipitation associated with sediment/water interaction processes. Chemical data collected from seep water samples, however, suggests, that most of the hexavalent chromium ultimately discharges into the Columbia River. Dilution of hexavalent chromium subsequently occurs during the mixing of groundwater and river water, with relatively little change taking place in speciation.

  18. The effects of water rock interaction and the human activities on the occurrence of hexavalent chromium in waters. The case study of the Psachna basin, Central Euboea, Greece.

    Science.gov (United States)

    Vasileiou, Eleni; Perraki, Maria; Stamatis, George; Gartzos, Efthimios

    2014-05-01

    High concentrations of heavy metals, particularly of the toxic hexavalent chromium, are recorded in surface and ground waters in many areas, and constitute one of the most severe environmental problems nowadays. The natural genesis of chromium is associated with the geological environment (peridotites and serpentintites). Chromium is structured in many minerals, mainly in spinel (e.g. chromite), in silicate minerals such as phyllosilicate serpentine minerals, chlorite, talc and chain-silicate minerals of pyroxene and amphibole group. Chromium is found in two forms in soils, waters and rocks, the hexavalent and the trivalent one. The relation between Cr(III) and Cr(VI) strongly depends on pH and oxidative properties of the area; however, in most cases, Cr(III) is the dominating variant. The natural oxidation of trivalent to hexavalent chromium can be achieved by manganese oxides, H2O2, O2 gas and oxy-hydroxides of trivalent iron. Anthropogenic factors may also cause the process of chromium's oxidation. In the Psachna basin, Central Euboea, Greece, high concentrations of hexavalent chromium were recently measured in spring- and drill- waters. In this work, we study the effect of the geological environment and of the anthropogenic activities on the water quality with emphasis on chromium. A detailed geochemical, petrological and mineralogical study of rocks and soils was carried out by means of optical microscopy, XRF, XRD and SEM/EDS. Ground and surface water samples were physically characterized and hydrochemically studied by means of ICP and AAF. Combined result evaluation indicates a natural source for the trivalent chromium in waters, attributed to the alteration of Cr-bearing minerals of the ultramafic rocks. However the oxidation of trivalent to hexavalent chromium results from anthropogenic activities, mainly from intensive agricultural activities and the extensive use of fertilizers and pesticides causing nitrate pollution in groundwater. It has been shown

  19. Investigations of the Dephosphorization of Liquid Iron Solution Containing Chromium and Nickel

    Science.gov (United States)

    Karbowniczek, Miroslaw; Kawecka-Cebula, Elzbieta; Reichel, Jan

    2012-06-01

    The most up-to-date trends in stainless steel production—aiming at the reduction of production costs—consist of the substitution of steel scrap by hot metal, coming from the reduction of iron-chromium ores. This process requires a more extensive dephosphorization. The dephosphorization process, when applied to chromium steels, requires slag with high dephosphorization properties, as either chromium or chromium oxide entering the slag decreases distinctly the efficiency of the process. The results of laboratory investigations on the dephosphorization of liquid iron solutions containing chromium and nickel are presented. In particular, the study was focused on the selection of the optimal slag composition and the way the slag should be added. The slags based on calcium and fluorite with cryolite additions were considered. It was shown that the variables with the greatest impact on the dephosphorization process include chromium and nickel levels, temperature, and slag basicity. A statistical analysis was performed and regression equations were set. The results may be of use for the design of new methods of production of high-chromium steels.

  20. Chromium content of selected Greek foods.

    Science.gov (United States)

    Bratakos, Michael S; Lazos, Evangelos S; Bratakos, Sotirios M

    2002-05-01

    The total chromium content of a wide variety of Greek foods was determined by graphite furnace atomic absorption spectroscopy (GFAAS). Meat, fish and seafood, cereals and pulses were rich sources of chromium (>0.100 microg/g). Fruits, milk, oils and fats and sugar were poor sources. Differences in chromium content were found between different food classes from Greece and those from some other countries. Based on available food consumption data and chromium levels in this study, it was estimated that the chromium intake of Greeks is 143 microg/day, with vegetables, cereals and meat being the main contributors. PMID:12083715

  1. Effects of chromium and cobalt compounds on burning rate of ammonium nitrate/hydroxyl-terminated polybutadiene composite propellants. Shosan ammonium/HTPB kei composite suishin'yaku no nensho sokudo ni oyobosu chromium to cobalt kagobutsu no eikyo

    Energy Technology Data Exchange (ETDEWEB)

    Hagihara, Y.; Ichikawa, T.; Shinpo, H.; Suzuki, M. (The National Defense Academy, Yokosuka (Japan))

    1991-12-31

    Study was made on the effects of chromium and cobalt compounds on burning rate of AN/HTPB composite propellants by using 14 types of chromium and cobalt compounds as catalysts and it was clear that burning rate of composite propellants increases with all catalysts and increase in burning rate by ammonium dichromate and chromium (III) acetylacetone is significantly large. Pressure exponent for cobalt(II) oxide and cobalt(II) benzoate has decreased but it has increased with other catalysts. Pressure exponent has significantly increased in the case of cobalt 2-ethylhexanoate and cobalt(II) acetylacetone. Effect of compounds on slurry viscosity also has shown the decrease in the viscosity except chromium(III) oxide and cobalt(II,III) oxide, and in the case of cobalt 2-ethylhexanoate the viscosity is significantly low. Drophammer sensitivity of AN is not affected with the added compounds. 4 refs., 3 figs., 4 tabs.

  2. Determination of chromium combined with DNA, RNA and protein in chromium-rich brewer's yeast

    International Nuclear Information System (INIS)

    The contents of chromium in the DNA, RNA and protein fractions separated from chromium-rich and normal brewer's yeast were determined with the neutron activation analysis in order to study the combination of Cr with DNA, RNA and protein in chromium-rich brewer's yeast. The results showed that the extracting rats and concentrations of DNA, RNA and protein had no significant difference in two types of yeast, but the chromium contents of DNA, RNA and protein in the chromium-rich yeast were significantly higher than those in the normal. In addition, the content of chromium in DNA was much higher than that in RNA and protein, which indicated that the inorganic chromium compounds entered into the yeast cell, during the yeast cultivation in the culture medium containing chromium were converted into organic chromium compounds combined with DNA, RNA and protein

  3. Removal of chromium from aqueous solutions by adsorption on activated alumina

    International Nuclear Information System (INIS)

    The increasing contamination of urban and industrial wastewaters by toxic metal ions causes significant environmental pollution. All over the world, chromium is abundantly available in nature (rocks, soil, plants); it is present in aqueous solutions mainly in Cr III and Cr VI oxidation states which are commonly used in various industrial processes. Chromium especially in its VI oxidation state is considered as a very toxic ion; thus, its elimination from aqueous solutions should be considered an environmental primary target. The removal of chromium VI from aqueous solutions by activated alumina has been investigated as a function of solution pH, initial chromium concentration, adsorbent dose of alumina and temperature. The pH and the adsorbent dose of activated alumina are the most significant parameter affecting chromium VI adsorption. The Freundlich and Langmuir models have been applied and the equilibrium adsorption was found to best fit the Freundlich and Langmuir adsorption isotherm. A comparison of kinetic models applied to the adsorption of chromium VI on activated alumina was evaluated for the pseudo first-order and the pseudo second-order models respectively. Results show that the pseudo second-order kinetic model was found to correlate the experimental data well.

  4. Phase and substance transformations during carbothermic reduction of main elements in chromium ore

    International Nuclear Information System (INIS)

    On the basis of thermodynamic analysis and the elaboration of chromium oxide metallizing and carbonization parameters the phase and substance transformations during carbothermic reduction of main elements are studied as applied to manufacturing chromium-bearing briquettes from the ore. The mechanism of transformations on the way to a final form of element presence is revealed. The initial briquette consists mainly of Cr2O3 and Fe2O3 oxides. Active interaction between chromium oxides and carbon is observed after drying and results in an essential amount of Cr7C3 and Cr23C6 carbides. Further thermal treatment is accompanied by intense carbide formation with the appearance of new carbides Cr3C2 and Fe3C

  5. Synthesis of chromium and ferrochromium alloy in molten salts by the electro-reduction method

    Directory of Open Access Journals (Sweden)

    Ge X.

    2015-01-01

    Full Text Available In this work, we successfully applied the Fray-Farthing-Chen Cambridge electro-reduction process on the preparation of chromium from chromium oxide, and for the first time, the synthesis of ferrochromium alloy from chromium oxide and iron oxide mixture and the chromite ore in molten calcium chloride. The present work systematically investigated the influences of sintered temperature of the solid precursor, electrochemical potential, electrolysis temperature and time on the products by using a set of advanced characterization techniques, including XRD and SEM/EDS analyses. In particular, our results show that this process is energy-friendly and technically-feasible for the direct extraction of ferrochromium alloy from chromite ore. Our findings thus provide useful insights for designing a novel green process to produce ferrochromium alloy from low-grade chromite ore or stainless steel slag.

  6. Chromium leaching from a silicone foam-encapsulated mixed waste surrogate

    International Nuclear Information System (INIS)

    This study assessed chromium leaching from silicone foam-encapsulated salt waste, using a surrogate formulated after Department of Energy complex mixed waste. Two commercial formulations of silicone foam (Wacker ELEKTROGUARD 2100 and General Electric RTV-664) were evaluated as a function of waste load (28--48 wt%). Chromium leaching was formulation specific and increased with increasing waste load as measured by the Toxicity Characteristic Leaching Procedure (TCLP). Chromium release followed transport controlled dissolution at all waste loads under TCLP (cut samples) and Accelerated Leach Test (ALT) (molded samples) conditions. Aqueous and surface complexation modeling was also used to describe reduced chromium effective diffusivity due to iron oxide addition. Comparison of modeling and measured diffusivities as a function of waste load demonstrated that the total available iron surface site concentration increased with increasing waste load, consistent with pore differences measured by image analysis. These results provide a basis for further work on modeling and engineering waste encapsulation using silicone foam

  7. Corrosion behavior of HVOF-sprayed and Nd-YAG laser-remelted high-chromium, nickel-chromium coatings

    Science.gov (United States)

    Tuominen, J.; Vuoristo, P.; Mäntylä, T.; Ahmaniemi, S.; Vihinen, J.; Andersson, P. H.

    2002-06-01

    Thermal spray processes are widely used to deposit high-chromium, nickel-chromium coatings to improve high temperature oxidation and corrosion behavior. However, despite the efforts made to improve the present spraying techniques, such as high-velocity oxyfuel (HVOF) and plasma spraying, these coatings may still exhibit certain defects, such as unmelted particles, oxide layers at splat boundaries, porosity, and cracks, which are detrimental to corrosion performance in severe operating conditions. Because of the process temperature, only mechanical bonding is obtained between the coating and substrate. Laser remelting of the sprayed coatings was studied in order to overcome the drawbacks of sprayed structures and to markedly improve the coating properties. The coating material was high-chromium, nickel-chromium alloy, which contains small amounts of molybdenum and boron (53.3% Cr, 42.5% Ni, 2.5% Mo, 0.5% B). The coatings were prepared by HVOF spraying onto mild steel substrates. A high-power, fiber-coupled, continuous-wave Nd:YAG laser equipped with large beam optics was used to remelt the HVOF-sprayed coating using different levels of scanning speed and beam width (10 or 20 mm). Coating that was remelted with the highest traverse speed suffered from cracking because of the rapid solidification inherent to laser processing. However, after the appropriate laser parameters were chosen, nonporous, crack-free coatings with minimal dilution between coating and substrate were produced. Laser remelting resulted in the formation of a dense oxide layer on top of the coatings and full homogenization of the sprayed structure. The coatings as sprayed and after laser remelting were characterized by optical and electron microscopy (OM, SEM, respectively). Dilution between coating and substrate was studied with energy dispersive spectrometry (EDS). The properties of the laser-remelted coatings were directly compared with properties of as-sprayed HVOF coatings.

  8. Hanford tank waste oxidative leach behavior analysis

    International Nuclear Information System (INIS)

    This paper study develops a modeling assumption for oxidative leaching Hanford tank wastes based on observed behavior of a limited set of samples tested. Oxidative Leaching of solids from Hanford tank wastes can reduce chromium concentrations appreciably

  9. Eolian transport of geogenic hexavalent chromium to ground water

    Science.gov (United States)

    Wood, W.W.; Clark, D.; Imes, J.L.; Councell, T.B.

    2010-01-01

    A conceptual model of eolian transport is proposed to address the widely distributed, high concentrations of hexavalent chromium (Cr+6) observed in ground water in the Emirate of Abu Dhabi, United Arab Emirates. Concentrations (30 to more than 1000 μg/L Cr+6) extend over thousands of square kilometers of ground water systems. It is hypothesized that the Cr is derived from weathering of chromium-rich pyroxenes and olivines present in ophiolite sequence of the adjacent Oman (Hajar) Mountains. Cr+3 in the minerals is oxidized to Cr+6 by reduction of manganese and is subsequently sorbed on iron and manganese oxide coatings of particles. When the surfaces of these particles are abraded in this arid environment, they release fine, micrometer-sized, coated particles that are easily transported over large distances by wind and subsequently deposited on the surface. During ground water recharge events, the readily soluble Cr+6 is mobilized by rain water and transported by advective flow into the underlying aquifer. Chromium analyses of ground water, rain, dust, and surface (soil) deposits are consistent with this model, as are electron probe analyses of clasts derived from the eroding Oman ophiolite sequence. Ground water recharge flux is proposed to exercise some control over Cr+6 concentration in the aquifer.

  10. Bioadsorption and bioaccumulation of chromium trivalent in Cr(III)-tolerant microalgae: a mechanisms for chromium resistance.

    Science.gov (United States)

    Pereira, M; Bartolomé, M C; Sánchez-Fortún, S

    2013-10-01

    Anthropogenic activity constantly releases heavy metals into the environment. The heavy metal chromium has a wide industrial use and exists in two stable oxidation states: trivalent and hexavalent. While hexavalent chromium uptake in plant cells has been reported that an active process by carrying essential anions, the cation Cr(III) appears to be taken up inactively. Dictyosphaerium chlorelloides (Dc1M), an unicellular green alga is a well-studied cell biological model organism. The present study was carried out to investigate the toxic effect of chromium exposures on wild-type Cr(III)-sensitive (Dc1M(wt)) and Cr(III)-tolerant (Dc1M(Cr(III)R30)) strains of these green algae, and to determine the potential mechanism of chromium resistance. Using cell growth as endpoint to determine Cr(III)-sensitivity, the IC₅₀(₇₂) values obtained show significant differences of sensitivity between wild type and Cr(III)-tolerant cells. Scanning electron microscopy (SEM) showed significant morphological differences between both strains, such as decrease in cell size or reducing the coefficient of form; and transmission electron microscopy (TEM) revealed ultrastructural changes such as increased vacuolization and cell wall thickening in the Cr(III)-tolerant strain with respect to the wild-type strain. Energy dispersive X-ray analysis (SEM/XEDS) revealed that Cr(III)-tolerant D. chlorelloides cells are able to accumulate considerable amounts of chromium distributed in cell wall (bioadsorption) as well as in cytoplasm, vacuoles, and chloroplast (bio-accumulation). Morphological changes of Cr(III)-tolerant D. chlorelloides cells and the presence of these electron-dense bodies in their cell structures can be understood as a Cr(III) detoxification mechanism. PMID:23810518

  11. Tissues and urinary chromium concentrations in rats fed high-chromium diets

    International Nuclear Information System (INIS)

    Complete text of publication follows. Chromium is an essential trace elements and enhances the function of insulin as a form of chromodulin. In the subjects with a certain type of diabetics, 200 to 1,000 μg/d of chromium is administered to reduced the symptoms of diabetics. However, although there are not any health-promotive effects of chromium-administration in healthy subjects, various types of chromium supplements are commercially available in many countries; the adverse effects caused by an excessive chromium intake are feared. In the present study, to clarify the tolerable upper limit of chromium, tissue and urinary chromium concentrations, liver function and iron status were examined in rats fed high-chromium diets. Thirty-six male 4-weeks Wistar rats were divided into six groups and fed casein-based diets containing 1, 10 or 100 μg/g of chromium as chromium chloride (CrCl3) or chromium picolinate (CrPic) for 4 weeks. After the feeding, chromium concentrations in liver, kidney, small intestine and tibia were determined by inductively coupled plasma-mass spectrometry. In addition, urine samples were collected on 3rd to 4th week and their chromium concentrations were also determined. Chromium concentrations in liver, kidney, small intestine and tibia were elevated with increase of dietary chromium concentration. Urinary chromium excretion was also elevated with the increase of dietary chromium and the rate of urinary chromium excretion was less than 2% to dietary chromium intake in all the experimental groups. In the administration of 100 μg/g of chromium, rats given CrCl3 showed significantly higher tibia chromium concentration and lower urinary chromium excretion than those given CrPic. There were not any differences in iron status among the experimental groups. Activities of serum aspartate aminotransferase and alanine aminotransferase in rats fed diet containing 100 μg/g of chromium as CrPic were significantly higher than those in rats fed other diets.

  12. Photocatalysis with chromium-doped TiO2: Bulk and surface doping

    KAUST Repository

    Ould-Chikh, Samy

    2014-04-15

    The photocatalytic properties of TiO2 modified by chromium are usually found to depend strongly on the preparation method. To clarify this problem, two series of chromium-doped titania with a chromium content of up to 1.56 wt % have been prepared under hydrothermal conditions: the first series (Cr:TiO2) is intended to dope the bulk of TiO2, whereas the second series (Cr/TiO2) is intended to load the surface of TiO2 with Cr. The catalytic properties have been compared in the photocatalytic oxidation of formic acid. Characterization data provides evidence that in the Cr/TiO2 catalysts chromium is located on the surface of TiO2 as amorphous CrOOH clusters. In contrast, in the Cr:TiO 2 series, chromium is mostly dissolved in the titania lattice, although a minor part is still present on the surface. Photocatalytic tests show that both series of chromium-doped titania demonstrate visible-light-driven photo-oxidation activity. Surface-doped Cr/TiO2 solids appear to be more efficient photocatalysts than the bulk-doped Cr:TiO2 counterparts. It\\'s classified! The photocatalytic properties of TiO2 modified by chromium depend strongly on the preparation method. To clarify this problem, two types of modified titania are discussed: one with CrIII doped in the bulk and one with CrOOH clusters on the TiO2 surface (see picture). Both series show visible-light-driven photo-oxidation activity. However, surface modification appears to be a more efficient strategy. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Food Chromium Contents, Chromium Dietary Intakes And Related Biological Variables In French Free-Living Elderly

    Science.gov (United States)

    Chromium (Cr III), an essential trace element, functions in potentiating insulin sensitivity, regulating glucose homeostasis, improving lipid profile, and maintaining lean body mass. Glucose intolerance and chromium deficiency increase with age, and could be aggravating factors of the metabolic synd...

  14. Soils contaminated with hexavalent chromium

    OpenAIRE

    Fonseca, Bruna Catarina da Silva

    2011-01-01

    Tese de doutoramento em Engenharia Química e Biológica The interest in environmental soil science has been growing in the last years due to the continuous degradation of this major natural resource. With this in mind, and because chromium and lead are two of the most toxic heavy metals frequently detected as soil contaminants in the Portuguese territory, the study and development of few remediation techniques and the indissociable description of the sorption and migration of...

  15. Carbon, chromium and molybdenum contents

    International Nuclear Information System (INIS)

    This work describes solidification experiments on white cast iron, with 15 and 20% of chromium, 2.3, 3.0 and 3.6 % of carbon and 0.0, 1.5 and 2.5 % of molybdenum in test de samples with 30 mm diameter. Measurements were performed on the austenite and eutectic formation arrests, the number of the eutectic carbide particles relative to the total and the eutectic volumes, and the volume fraction of the primary austenite

  16. Preparation and Characterization of Nanocrystalline Hard Chromium Coatings Using Eco-Friendly Trivalent Chromium Bath

    OpenAIRE

    V. S. Protsenko; V. O Gordiienko; Danilov, F. I.; Kwon, S.C.

    2011-01-01

    A new aqueous sulfate trivalent chromium bath is described. The chromium bath contains formic acid and carbamide as complexing agents. Chromium was deposited at a temperature of 30÷40 oC and a cathode current density of 10÷25 A dm-2. The bath allows obtaining thick (up to several hundred micrometers) hard chromium coatings with nanocrystalline structure. The electrodeposition rate reaches 0.8÷0.9 µm min-1.

  17. REMOVAL OF HEXAVALENT CHROMIUM FROM DRINKING WATER

    OpenAIRE

    A. R. Asgari ، F. Vaezi ، S. Nasseri ، O. Dördelmann ، A. H. Mahvi ، E. Dehghani Fard

    2008-01-01

    Removal of chromium can be accomplished by various methods but none of them is cost-effective in meeting drinking water standards. For this study, granular ferric hydroxide was used as adsorbent for removal of hexavalent chromium. Besides, the effects of changing contact time, pH and concentrations of competitive anions were determined for different amounts of granular ferric hydroxide. It was found that granular ferric hydroxide has a high capacity for adsorption of hexavalent chromium from ...

  18. Inoculation of chromium white cast iron

    Directory of Open Access Journals (Sweden)

    D. Kopyciński

    2009-01-01

    Full Text Available It has been proved that an addition of boron carbide introduced as an inoculant to the chromium white cast iron changes the structureof castings. Castings after inoculation revealed a different structure with numerous grains. Primary precipitates of chromium carbide also appeared, reducing the mechanical properties of as-cast parts. Properly established heat treatment regime makes chromium iron castings regain their, originally high, mechanical properties.

  19. Inoculation of chromium white cast iron

    OpenAIRE

    D. Kopyciński

    2009-01-01

    It has been proved that an addition of boron carbide introduced as an inoculant to the chromium white cast iron changes the structureof castings. Castings after inoculation revealed a different structure with numerous grains. Primary precipitates of chromium carbide also appeared, reducing the mechanical properties of as-cast parts. Properly established heat treatment regime makes chromium iron castings regain their, originally high, mechanical properties.

  20. Baixa dosagem de óxido de cromo para estimativa da produção fecal em bovinos Low level of chromium oxide to estimate faecal output in cattle

    Directory of Open Access Journals (Sweden)

    Henrique Mendonça Nunes Ribeiro Filho

    2008-12-01

    Full Text Available Foi avaliado o uso de baixa dosagem de óxido de cromo (Cr2O3 incorporado em um alimento concentrado para estimativa da produção fecal (PF em bovinos. Para tanto, foram conduzidos quatro ensaios de digestibilidade in vivo utilizando quatro novilhos com peso vivo médio de 214±31kg, recebendo ad libitum no cocho azevém anual (Lolium multiflorum Lam. cortado verde. Aproximadamente 200g de ração contendo 5g kg-1 do indicador foi fornecida diariamente durante 12 dias, sendo feito a coleta de dados e amostras nos últimos cinco dias de cada período. A PF foi medida com o uso de sacolas de coleção total ou estimada com base na concentração do indicador em amostras fecais coletadas duas vezes ao dia (8 e 16h ou a intervalos de duas horas entre 8 e 22h. A concentração média de cromo nas amostras coletadas às 8 e 16h (445mg kg-1 foi semelhante à média geral de todos os horários (447mg kg-1. O grau de recuperação fecal (GR do indicador aumentou linearmente, de aproximadamente 40% para em torno de 80%, com o aumento da concentração fecal de cromo até esta última atingir um valor em torno de 250mg kg-1 de MO. Quando a concentração de cromo nas fezes foi superior a este valor o GR se manteve relativamente constante, em média 76%. A produção fecal foi superestimada pelo indicador em até 35% quando não corrigido para o GR. Quando corrigido para a recuperação fecal, as estimativas de produção fecal de MO estimadas foram similares às observadas. A excreção fecal de bovinos alimentados com azevém pode ser acuradamente estimada com o uso de baixa dosagem de óxido de cromo incorporado em uma ração peletizada concomitante à coleta de duas amostragens diárias de fezes.The aim of this research was to evaluate the use of a low level of chromium oxide (Cr2O3 incorporated into the concentrate ration to estimate faecal output (FO in cattle. Four in vivo digestibility essays were conducted using four steers with live weights of

  1. Electrical and mechanical properties of layered gold-chromium thin films for ohmic contacts in RF-MEMS switches

    International Nuclear Information System (INIS)

    The electrical contacts are the most critical part for the reliability of RF-MEMS switches. For this reason the development of new contact materials with higher hardness and low resistivity would be of great help in increasing MEMS switch reliability. In this paper a detailed study of mechanical, electrical and morphological properties of gold-chromium multilayers is presented and discussed. It will be shown how hardness of gold can be increased introducing thin layers of chromium inside the gold contact layer. However, some care must be taken, since this improvement can vanish because of thermal and oxygen plasma treatments normally involved in RF-switches fabrication, mainly due to chromium oxidation.

  2. Electrical and mechanical properties of layered gold-chromium thin films for ohmic contacts in RF-MEMS switches

    Energy Technology Data Exchange (ETDEWEB)

    Mulloni, V. [Fondazione B. Kessler- Centro Materiali e Microsistemi, Via Sommarive 18, 38050 Trento (Italy)], E-mail: mulloni@fbk.eu; Bartali, R.; Colpo, S.; Giacomozzi, F.; Laidani, N.; Margesin, B. [Fondazione B. Kessler- Centro Materiali e Microsistemi, Via Sommarive 18, 38050 Trento (Italy)

    2009-07-25

    The electrical contacts are the most critical part for the reliability of RF-MEMS switches. For this reason the development of new contact materials with higher hardness and low resistivity would be of great help in increasing MEMS switch reliability. In this paper a detailed study of mechanical, electrical and morphological properties of gold-chromium multilayers is presented and discussed. It will be shown how hardness of gold can be increased introducing thin layers of chromium inside the gold contact layer. However, some care must be taken, since this improvement can vanish because of thermal and oxygen plasma treatments normally involved in RF-switches fabrication, mainly due to chromium oxidation.

  3. A novel surface cleaning method for chemical removal of fouling lead layer from chromium surfaces

    International Nuclear Information System (INIS)

    Most products especially metallic surfaces require cleaning treatment to remove surface contaminations that remain after processing or usage. Lead fouling is a general problem which arises from lead fouling on the chromium surfaces of bores and other interior parts of systems which have interaction with metallic lead in high temperatures and pressures. In this study, a novel chemical solution was introduced as a cleaner reagent for removing metallic lead pollution, as a fouling metal, from chromium surfaces. The cleaner aqueous solution contains hydrogen peroxide (H2O2) as oxidizing agent of lead layer on the chromium surface and acetic acid (CH3COOH) as chelating agent of lead ions. The effect of some experimental parameters such as acetic acid concentration, hydrogen peroxide concentration and temperature of the cleaner solution during the operation on the efficiency of lead cleaning procedure was investigated. The results of scanning electron microscopy (SEM) showed that using this procedure, the lead pollution layer could be completely removed from real chromium surfaces without corrosion of the original surface. Finally, the optimum conditions for the complete and fast removing of lead pollution layer from chromium surfaces were proposed. The experimental results showed that at the optimum condition (acetic acid concentration 28% (V/V), hydrogen peroxide 8% (V/V) and temperature 35 deg. C), only 15-min time is needed for complete removal of 3 g fouling lead from a chromium surface.

  4. A Comprehensive Review on Nickel (II And Chromium VI Toxicities - Possible Antioxidant (Allium Sativum Linn Defenses

    Directory of Open Access Journals (Sweden)

    Kusal K.Das

    2009-12-01

    Full Text Available The toxicity associated with nickel (II and chromium (VI is mainly due to generation of reactive oxygen species (ROS with subsequent oxidative deterioration of biological macromolecules. Both nickel and chromium can generate free radicals (FR directly from molecular oxygen in a two step process to produce superoxide anion and in continued process, produce highly toxic hydroxyl radical. The pro-oxidative effects are compounded by fact that they also inhibit antioxidant enzymes and deplete intracellular glutathione. Garlic (Allium sativum has played an important dietary and medicinal role throughout the history of mankind. Garlic has the potential to enhance the endogenous antioxidant status in nickel as well as hexavalent chromium induced lipid peroxidation in normal and diabetic rats.

  5. Thermodynamic studies of chromium adsorption on iron species generated by electrocoagulation

    Energy Technology Data Exchange (ETDEWEB)

    Parga, J.R.; Vazquez, V.; Gonzalez, G.; Cisneros, M.M. [Metallurgy and Materials Science Department, Institute Technology of Saltillo (Mexico)

    2010-10-15

    The protection of the global environment and in particular, the provision of a sustainable source of clean water is a necessity for human survival. Specifically, large quantities of chromium containing compounds are being discharged into the environment. This study has been carried out to determine the feasibility of chromium adsorption on iron species by an Electrocoagulation (EC) process using the Langmuir Isotherm. The full potential of EC with air injection as an alternative wastewater treatment technique to remove chromium from well water shows more than 99 % removal without the addition of any chemical reagents. In this study, X-Ray Diffraction, Scanning Electron Microscopy, Moessbauer Spectroscopy and Fourier Transform Infrared Spectroscopy are used to characterize the solid products that reveal the expected crystalline iron oxides, i.e., lepidocrocite, magnetite, gohetite, and iron oxide. (Abstract Copyright [2010], Wiley Periodicals, Inc.)

  6. Brief report on thermodynamics of chromium slags and kinetic modelling of chromite reduction (1995-96)

    Energy Technology Data Exchange (ETDEWEB)

    Xiao Yamping; Holappa, L. [Helsinki Univ. of Technology, Otaniemi (Finland). Lab. of Metallurgy

    1996-12-31

    This article summaries the research work on thermodynamics of chromium slags and kinetic modelling of chromite reduction. The thermodynamic properties of FeCr slag systems were calculated with the regular solution model. The effects of CaO/MgO ratio, Al{sub 2}0{sub 3} amount as well as the slag basicity on the activities of chromium oxides and the oxidation state of chromium were examined. The calculated results were compared to the experimental data in the literature. In the kinetic modelling of the chromite reduction, the reduction possibilities and tendencies of the chromite constitutes with CO were analysed based on the thermodynamic calculation. Two reaction models, a structural grain model and a multi-layers reaction model, were constructed and applied to simulate the chromite pellet reduction and chromite lumpy ore reduction, respectively. The calculated reduction rates were compared with the experimental measurements and the reaction mechanisms were discussed. (orig.) SULA 2 Research Programme; 4 refs.

  7. Performance of high-velocity oxy-fuel-sprayed chromium carbide-nickel chromium coating in an actual boiler environment of a thermal power plant

    Energy Technology Data Exchange (ETDEWEB)

    Sidhu, T.S.; Prakash, S.; Agrawal, R.D. [Industrial Technology Institute, Roorkee (India)

    2007-09-15

    The present study aims to evaluate the performance of a high-velocity oxy-fuel (HVOF)-sprayed Cr{sub 3}C{sub 2}-NiCr (chromium carbide-nickel chromium) coating on a nickel-based super-alloy in an actual industrial environment of a coal-fired boiler, with the objective to protect the boiler super-heater and reheater tubes from hot corrosion. The tests were performed in the platen super heater zone of a coal-fired boiler for 1,000 h at 900 degrees C under cyclic conditions. The Cr{sub 3}C{sub 2}-NiCr coating imparted the necessary protection to the nickel-based super alloy in the given environment. The dense and flat splat structure of the coating, and the formation of oxides of chromium and nickel and their spinels, might have protected the substrate super alloy from the inward permeation of corrosive species.

  8. Permeation of chromium salts through human skin in vitro

    DEFF Research Database (Denmark)

    Gammelgaard, Bente; Fullerton, A; Avnstorp, C;

    1992-01-01

    of the dichromate solution. Chromium skin levels increased with increasing concentrations of applied chromium salts up to 0.034 M Cr. The amount of chromium in recipient phase and skin layers increased with increasing pH when the applied solution contained potassium dichromate. This was ascribed to a decreased skin...... barrier function of the skin. The amount of chromium found in all skin layers after application of chromium chloride decreased with increasing pH due to lower solubility of the salt. The % of chromium found in the recipient phase as chromium(VI) increased with increasing total chromium concentration...... indicating a limited reduction ability of the skin in vitro....

  9. Intracellular chromium localization and cell physiological response in the unicellular alga Micrasterias

    International Nuclear Information System (INIS)

    Various contaminants like metals and heavy metals are constantly released into the environment by anthropogenic activities. The heavy metal chromium has a wide industrial use and exists in two stable oxidation states: trivalent and hexavalent. Chromium can cause harm to cell metabolism and development, when it is taken up by plants instead of necessary micronutrients such as for example iron. The uptake of Cr VI into plant cells has been reported to be an active process via carriers of essential anions, while the cation Cr III seems to be taken up inactively. Micrasterias denticulata, an unicellular green alga of the family Desmidiaceae is a well-studied cell biological model organism. Cr III and VI had inhibiting effects on its cell development, while cell division rates were only impaired by Cr VI. Transmission electron microscopy (TEM) revealed ultrastructural changes such as increased vacuolization, condensed cytoplasm and dark precipitations in the cell wall after 3 weeks of Cr VI treatment. Electron energy loss spectroscopy (EELS) and electron spectroscopic imaging (ESI) were applied to measure intracellular chromium distribution. Chromium was only detected after 3 weeks of 10 μM Cr VI treatment in electron dense precipitations found in bag-like structures along the inner side of the cell walls together with iron and elevated levels of oxygen, pointing toward an accumulation respectively extrusion of chromium in form of an iron–oxygen compound. Atomic emission spectroscopy (EMS) revealed that Micrasterias cells are able to accumulate considerable amounts of chromium and iron. During chromium treatment the Cr:Fe ratio shifted in favor of chromium, which implied that chromium may be taken up instead of iron. Significant and rapid increase of ROS production within the first 5 min of treatment confirms an active Cr VI uptake. SOD and CAT activity after Cr VI treatment did not show a response, while the glutathione pool determined by immuno-TEM decreased

  10. Intracellular chromium localization and cell physiological response in the unicellular alga Micrasterias

    Energy Technology Data Exchange (ETDEWEB)

    Volland, Stefanie, E-mail: Stefanie.Volland@stud.sbg.ac.at [Plant Physiology Division, Cell Biology Department, University of Salzburg, Hellbrunnerstr 34, 5020 Salzburg (Austria); Luetz, Cornelius, E-mail: cornelius.luetz@uibk.ac.at [Institute of Botany, University of Innsbruck, Sternwartestrasse 15, 6020 Innsbruck (Austria); Michalke, Bernhard, E-mail: bernhard.michalke@helmholtz-muenchen.de [Helmholtz Zentrum Muenchen, German Research Centre for Environmental Health, Institute of Ecological Chemistry, Ingolstaedter Landstrasse 1, 85764 Neuherberg (Germany); Luetz-Meindl, Ursula, E-mail: ursula.luetz-meindl@sbg.ac.at [Plant Physiology Division, Cell Biology Department, University of Salzburg, Hellbrunnerstr 34, 5020 Salzburg (Austria)

    2012-03-15

    Various contaminants like metals and heavy metals are constantly released into the environment by anthropogenic activities. The heavy metal chromium has a wide industrial use and exists in two stable oxidation states: trivalent and hexavalent. Chromium can cause harm to cell metabolism and development, when it is taken up by plants instead of necessary micronutrients such as for example iron. The uptake of Cr VI into plant cells has been reported to be an active process via carriers of essential anions, while the cation Cr III seems to be taken up inactively. Micrasterias denticulata, an unicellular green alga of the family Desmidiaceae is a well-studied cell biological model organism. Cr III and VI had inhibiting effects on its cell development, while cell division rates were only impaired by Cr VI. Transmission electron microscopy (TEM) revealed ultrastructural changes such as increased vacuolization, condensed cytoplasm and dark precipitations in the cell wall after 3 weeks of Cr VI treatment. Electron energy loss spectroscopy (EELS) and electron spectroscopic imaging (ESI) were applied to measure intracellular chromium distribution. Chromium was only detected after 3 weeks of 10 {mu}M Cr VI treatment in electron dense precipitations found in bag-like structures along the inner side of the cell walls together with iron and elevated levels of oxygen, pointing toward an accumulation respectively extrusion of chromium in form of an iron-oxygen compound. Atomic emission spectroscopy (EMS) revealed that Micrasterias cells are able to accumulate considerable amounts of chromium and iron. During chromium treatment the Cr:Fe ratio shifted in favor of chromium, which implied that chromium may be taken up instead of iron. Significant and rapid increase of ROS production within the first 5 min of treatment confirms an active Cr VI uptake. SOD and CAT activity after Cr VI treatment did not show a response, while the glutathione pool determined by immuno-TEM decreased

  11. Intracellular chromium localization and cell physiological response in the unicellular alga Micrasterias.

    Science.gov (United States)

    Volland, Stefanie; Lütz, Cornelius; Michalke, Bernhard; Lütz-Meindl, Ursula

    2012-03-01

    Various contaminants like metals and heavy metals are constantly released into the environment by anthropogenic activities. The heavy metal chromium has a wide industrial use and exists in two stable oxidation states: trivalent and hexavalent. Chromium can cause harm to cell metabolism and development, when it is taken up by plants instead of necessary micronutrients such as for example iron. The uptake of Cr VI into plant cells has been reported to be an active process via carriers of essential anions, while the cation Cr III seems to be taken up inactively. Micrasterias denticulata, an unicellular green alga of the family Desmidiaceae is a well-studied cell biological model organism. Cr III and VI had inhibiting effects on its cell development, while cell division rates were only impaired by Cr VI. Transmission electron microscopy (TEM) revealed ultrastructural changes such as increased vacuolization, condensed cytoplasm and dark precipitations in the cell wall after 3 weeks of Cr VI treatment. Electron energy loss spectroscopy (EELS) and electron spectroscopic imaging (ESI) were applied to measure intracellular chromium distribution. Chromium was only detected after 3 weeks of 10 μM Cr VI treatment in electron dense precipitations found in bag-like structures along the inner side of the cell walls together with iron and elevated levels of oxygen, pointing toward an accumulation respectively extrusion of chromium in form of an iron-oxygen compound. Atomic emission spectroscopy (EMS) revealed that Micrasterias cells are able to accumulate considerable amounts of chromium and iron. During chromium treatment the Cr:Fe ratio shifted in favor of chromium, which implied that chromium may be taken up instead of iron. Significant and rapid increase of ROS production within the first 5 min of treatment confirms an active Cr VI uptake. SOD and CAT activity after Cr VI treatment did not show a response, while the glutathione pool determined by immuno-TEM decreased

  12. Intracellular chromium localization and cell physiological response in the unicellular alga Micrasterias

    Science.gov (United States)

    Volland, Stefanie; Lütz, Cornelius; Michalke, Bernhard; Lütz-Meindl, Ursula

    2012-01-01

    Various contaminants like metals and heavy metals are constantly released into the environment by anthropogenic activities. The heavy metal chromium has a wide industrial use and exists in two stable oxidation states: trivalent and hexavalent. Chromium can cause harm to cell metabolism and development, when it is taken up by plants instead of necessary micronutrients such as for example iron. The uptake of Cr VI into plant cells has been reported to be an active process via carriers of essential anions, while the cation Cr III seems to be taken up inactively. Micrasterias denticulata, an unicellular green alga of the family Desmidiaceae is a well-studied cell biological model organism. Cr III and VI had inhibiting effects on its cell development, while cell division rates were only impaired by Cr VI. Transmission electron microscopy (TEM) revealed ultrastructural changes such as increased vacuolization, condensed cytoplasm and dark precipitations in the cell wall after 3 weeks of Cr VI treatment. Electron energy loss spectroscopy (EELS) and electron spectroscopic imaging (ESI) were applied to measure intracellular chromium distribution. Chromium was only detected after 3 weeks of 10 μM Cr VI treatment in electron dense precipitations found in bag-like structures along the inner side of the cell walls together with iron and elevated levels of oxygen, pointing toward an accumulation respectively extrusion of chromium in form of an iron–oxygen compound. Atomic emission spectroscopy (EMS) revealed that Micrasterias cells are able to accumulate considerable amounts of chromium and iron. During chromium treatment the Cr:Fe ratio shifted in favor of chromium, which implied that chromium may be taken up instead of iron. Significant and rapid increase of ROS production within the first 5 min of treatment confirms an active Cr VI uptake. SOD and CAT activity after Cr VI treatment did not show a response, while the glutathione pool determined by immuno-TEM decreased

  13. Simultaneously Recovering High-Purity Chromium and Removing Organic Pollutants from Tannery Effluent

    Directory of Open Access Journals (Sweden)

    Jie Zong

    2016-01-01

    Full Text Available Chromium pollution is a serious issue because of carcinogenic toxicities of the pollutants and low recovery rate of chromium because of the presence of organic, such as protein and fat. In this work, high recovery rate and high purity of the chromium ion were successfully prepared by the way of acid enzyme, flocculant, and Fenton oxidation. The experiments were characterized by TG, TOC, UV-VIS, and SEM. In the work, the tannery waste chrome liquor was used as experimental material. The results showed that the percentage of reduction of TOC in the tannery waste chrome liquor by method of Fenton oxidation, acid enzyme, and the flocculant was 71.15%, 65.26%, and 22.05%, respectively. Therefore, the organism content of chrome tanning waste liquid was greatly reduced through the pretreatment. And the application experiment showed that the properties and grain surface and fibers of the tanned leather with commercial chromium powder and chrome tanning agent prepared from the chromium waste liquid treated with Fenton are nearly the same.

  14. Initiation and Performance of a Coating for Countering Chromium Poisoning in a SOFC-stack

    DEFF Research Database (Denmark)

    Nielsen, Karsten Agersted; Persson, Åsa Helen; Beeaff, Dustin;

    2007-01-01

    Minimising transport of chromium from the metallic interconnect (e.g. of Crofer 22APU) to the cathode in a planar solid oxide fuel cell is done by application of a coating between the two parts. The coating is applied by slurry coating, and taken through stack initialisation it transforms...

  15. Selective Leaching of Chromium from Hanford Tank Sludge 241-U-108

    Energy Technology Data Exchange (ETDEWEB)

    Rapko, Brian M.; Vienna, John D.

    2002-09-09

    This study evaluated the oxidants permanganate, MnO4-, and peroxynitrite, ONOO-, as selective chromium-leaching agents from washed 241-U-108 tank sludge under varying conditions of hydroxide concentration, temperature, and time. The mass changes and final sludge compositions were evaluated using glass-property models to ascertain the relative impacts of the various oxidative alkaline leach conditions on the amount of borosilicate glass required to immobilize a given amount of washed 241-U-108 Hanford tank sludge. Only permanganate leaching removes sufficient chromium to make the chromium concentration in the oxidatively alkaline leached solids non-limiting. In the absence of added oxidants, continued washing or caustic leaching have no beneficial effects. Peroxynitrite addition reduces the amount of glass required to immobilize a given amount of washed 241-U-108 tank sludge by approximately a factor of two. Depending on the leach conditions and the exact chromium concentration limits, contact with alkaline permanganate solutions reduces the amount of immobilized high-level waste glass by a factor of 10 to 30.

  16. Core and Valence Structures in K beta X-ray Emission Spectra of Chromium Materials

    NARCIS (Netherlands)

    Torres Deluigi, Maria; de Groot, Frank M. F.; Lopez-Diaz, Gaston; Tirao, German; Stutz, Guillermo; Riveros de la Vega, Jose

    2014-01-01

    We analyze the core and valence transitions in chromium in a series of materials with a number of different ligands and including the oxidation states: Cr-II, Cr-III, Cr-IV, and Cr-VI. To study the core-to-core transitions we employ the CTM4XAS program and investigate the shapes, widths, intensities

  17. Neutron scattering and models: Chromium

    International Nuclear Information System (INIS)

    Differential neutron elastic-scattering cross sections of elemental chromium are measured from 4.5 ∼ 10 MeV in steps of ∼ 0.5 MeV and at ≥ 40 scattering angles distributed between ∼ 17 degree--160 degree. Concurrently differential cross sections for the inelastic neutron excitation of the yrast 2+ (1.434 MeV) level in d52Cr are determined. In addition, broad inelastically-scattered neutron groups are observed corresponding to composite excitation of levels up to ∼ 5.5 MeV in the various chromium isotopes. These experimental results are combined with low-energy values previously reported from this laboratory, with recent ∼ 8 → 15 MeV data measured at the Physikalisch-Technische Bundesanstalt and with a 21.6 MeV result from the literature to form an extensive neutron-scattering data base which is interpreted in the context of spherical-optical and coupled-channels (rotational and vibrational) models. These models reasonably describe the observables but indicate rather large energy-dependent parameter trends at low energies similar to those previously reported near the peak of the So strength function in studies at this laboratory. The physical implications of the measurements and models are discussed including deformation, coupling, dispersive and asymmetry effects

  18. Removal of chromium hexavalent of residual water from tannery using hydrotalcite

    International Nuclear Information System (INIS)

    One of the main problems of leather tanned is the treatment that must be give to the waste water polluted with chrome which stays in trivalent form, but it is easily oxidated at chromium hexavalent. This work pretends to find an elimination media for chromium (VI) from water using the original synthetic hydrotalcite and calcined as sorbent by its anion exchange and memory effect properties. The tannery water was characterized by X-ray diffraction, thermal gravimetric analysis, specific surface and infrared spectroscopy. (Author)

  19. Chromium(VI) reduction by ascorbate: role of reactive intermediates in DNA damage in vitro.

    OpenAIRE

    Stearns, D M; Courtney, K D; Giangrande, P H; Phieffer, L S; Wetterhahn, K E

    1994-01-01

    Reaction of chromium(VI) with one equivalent of ascorbate was studied by electron paramagnetic resonance spectroscopy in the presence of 0.10 M 5,5-dimethyl-1-pyrroline-1-oxide (DMPO) at room temperature in 0.10 M (N-[2-hydroxyethyl]piperazine-N'-[2-ethanesulfonic acid]) (HEPES) and 0.05 M tris(hydroxymethyl)aminomethane hydrochloride (Tris-HCl) buffers (pH 7.0 room temperature). Chromium(V), ascorbyl radical, and carbon-based DMPO-radical adducts were observed. A higher level of Cr(V) was ob...

  20. Chemical Stability of Chromium Carbide and Chromium Nitride Powders Compared with Chromium Metal in Synthetic Biological Solutions

    OpenAIRE

    Tao Jiang; Inger Odnevall Wallinder; Gunilla Herting

    2012-01-01

    Chromium carbide (Cr-C) and chromium nitride (Cr-N) powders were compared with a chromium metal powder (Cr-metal) to evaluate their chemical stability in solution. All three powders were exposed in five different synthetic biological solutions of varying pH and chemical composition simulating selected human exposure conditions. Characterisation of the powders, using GI-XRD, revealed that the predominant bulk crystalline phases were Cr7C3 and Cr2N for Cr-C and Cr-N respectively. The outermost ...

  1. Low-chromium reduced-activation chromium-tungsten steels

    Energy Technology Data Exchange (ETDEWEB)

    Klueh, R.L.; Alexander, D.J.; Maziasz, P.J. [Oak Ridge National Lab., TN (United States)

    1996-10-01

    Bainitic microstructures formed during continuous cooling can differ from classical upper and lower bainite formed during isothermal transformation. Two types of non-classical bainite were observed depending on the cooling rate: carbide-free acicular bainite at rapid cooling rates and granular bainite at slower cooling rates. The Charpy impact toughness of the acicular ferrite was found to be considerably better than for the granular bainite. It was postulated that alloying to improve the hardenability of the steel would promote the formation of acicular bainite, just as increasing the cooling rate does. To test this, chromium and tungsten were added to the 2 1/4Cr-2W and 2 1/4Cr-2WV steel compositions to increase their hardenability, and the microstructures and mechanical properties were examined.

  2. Bainitic chromium-tungsten steels with 3 pct chromium

    International Nuclear Information System (INIS)

    Previous work on 3Cr-1.5MoV (nominally Fe-3Cr-2.5Mo-0.25V-0.1C), 2.25Cr-2W (Fe-2.25Cr-2W-0.1C), and 2.25Cr-2WV (Fe-2.25Cr-2W-0.25V-0.1C) steels indicated that the impact toughness of these steels depended on the microstructure of the bainite formed during continuous cooling from the austenization temperature. Microstructures formed during continuous cooling can differ from classical upper and lower bainite formed during isothermal transformation. Two types of nonclassical microstructures were observed depending on the cooling rate: carbide-free acicular bainite at rapid cooling rates and granular bainite at slower cooling rates. The Charpy impact toughness of the acicular ferrite was considerably better than for the granular bainite. It was postulated that alloying to improve the hardenability of the steel would promote the formation of acicular bainite, just as increasing the cooling rate does. To test this, chromium and tungsten were added to the 2.25Cr-2W and 2.25Cr-2WV steel compositions to increase their hardenability. Charpy testing indicated that the new 3Cr-W and 3Cr-WV steels had improved impact toughness, as demonstrated by lower ductile-brittle transition temperatures and higher upper-shelf energies. This improvement occurred with less tempering than was necessary to achieve similar toughness for the 2.25Cr steels and for high-chromium (9 to 12 pct Cr) Cr-W and Cr-Mo steels

  3. Release of Hexavalent Chromium by Ash and Soils in Wildfire-Impacted Areas

    Science.gov (United States)

    Wolf, Ruth E.; Morman, Suzette A.; Plumlee, Geoffrey S.; Hageman, Philip L.; Adams, Monique

    2008-01-01

    The highly oxidizing environment of a wildfire has the potential to convert any chromium present in the soil or in residential or industrial debris to its more toxic form, hexavalent chromium, a known carcinogen. In addition, the highly basic conditions resulting from the combustion of wood and wood products could result in the stabilization of any aqueous hexavalent chromium formed. Samples were collected from the October 2007 wildfires in Southern California and subjected to an array of test procedures to evaluate the potential effects of fire-impacted soils and ashes on human and environmental health. Soil and ash samples were leached using de-ionized water to simulate conditions resulting from rainfall on fire-impacted areas. The resulting leachates were of high pH (10-13) and many, particularly those of ash from burned residential areas, contained elevated total chromium as much as 33 micrograms per liter. Samples were also leached using a near-neutral pH simulated lung fluid to model potential chemical interactions of inhaled particles with fluids lining the respiratory tract. High Performance Liquid Chromatography coupled to Inductively Coupled Plasma Mass Spectrometry was used to separate and detect individual species (for example, Cr+3, Cr+6, As+3, As+5, Se+4, and Se+6). These procedures were used to determine the form of the chromium present in the de-ionized water and simulated lung fluid leachates. The results show that in the de-ionized water leachate, all of the chromium present is in the form of Cr+6, and the resulting high pH tends to stabilize Cr+6 from reduction to Cr+3. Analysis of the simulated lung fluid leachates indicates that the predominant form of chromium present in the near-neutral pH of lung fluid would be Cr+6, which is of concern due to the high possibility of inhalation of the small ash and soil particulates, particularly by fire or restoration crews.

  4. The Morphology of Chromium and LIF Measurement of Atomic Arsenic in Laminar Diffusion Flames

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Young Bin [Department of Aerospace Engineering, Seoul National University, Seoul (Korea, Republic of)

    1997-06-26

    The morphology and size distribution of chromium oxides and the concentration measurement of atomic arsenic have been studied in laminar diffusion flames. Nitrogen was added to vary flame temperatures in hydrogen flames. Ethene flames were used in order to investigate the potential for interaction between the soot aerosol that is formed in these flames and the chromium aerosol. Two sources of chromium compounds were introduced:chromium nitrate and chromium hexacarbonyl. A detailed investigation of the morphology was carried out by scanning electron microscopy(SEM). The amounts of Cr(VI) and total Cr were determined by a spectrophotometric method and by X-ray fluorescence spectrometry, respectively. Also, LIF was used for the measurement of atomic arsenic, which was excited at 197.2 nm and was detected at 249.6 nm. Results showed that the morphology of the particles varied with the flame temperature and with the chromium source. The particles were characterized by porous structures, cenospheres and agglomerated dense particles when chromium nitrate solution was added to the flames. At low to moderate temperature, porous sintered cenospheric structures were formed, in some cases with a blow hole. At higher temperatures, an agglomerated cluster which was composed Cr(VI) from the undiluted H{sub 2} flame was more than 10 times larger than in the 50%H{sub 2}/50%N{sub 2} flame on a mass basis. Single point LIF measurement of atomic arsenic indicated that arsenic exist only in the low temperature, fuel rich region. (author). 14 refs., 1 tab., 7 figs.

  5. Synthesis of Chromium (Ⅲ) 5-aminosalicylate

    Institute of Scientific and Technical Information of China (English)

    LI Wei; HAO Er-jun; JIANG Yu-qin

    2004-01-01

    As we all known that diabetes is a chronic disease with major health consequences.Research has revealed that the occurrence of diabetes have great thing to do with the chromium deficient. Almost 40 years after the first report of glucose tolerance factor(GTF) [1], no conclusive evidence for an isolable ,biologically active form of chromium exited. Three materials have been proposed to be the biologically active form of chromium: "glucose tolerance factor", chromium Picolinate and low-molecular-weight chromium-binding substance (LWMCr) [2] . So there is potential for the design of new chromium drugs .5-Aminosalicylic acid (5-ASA) is identified as an active component in the therapy of inflammatory bowel disease (IBD) such as Crohn's disease and ulcerative colitis . The therapeutic action of 5-ASA is believed to be coupled to its ability to act as a free radical scavenger [3-4],acting locally on the inflamed colonic mucosa [5-7]. However, the clinical use of 5-ASA is limited, since orally administered 5-ASA is rapidly and completely absorbed from the upper gastrointestinal tract and therefore the local therapeutic effects of 5-ASA in the colon is hardly expected.In this paper, we report the synthesis of chromium(Ⅲ)5-aminosalicylate from 5-ASA and CrCl3. 6H2O.The synthesis route is as follow:The complex has been characterized by elemental analysis, IR spectra, X-ray powder diffractionand TG-DTA . They indicate that the structure is tris(5-ASA) Chromium . Experiments show that thecomplex has a good activity for supplement tiny dietary chromium, lowering blood glucose levels,lowering serum lipid levels and in creasing lean body mass .

  6. Chromium in leather footwear-risk assessment of chromium allergy and dermatitis

    DEFF Research Database (Denmark)

    Thyssen, Jacob P; Strandesen, Maria; Poulsen, Pia B;

    2012-01-01

    Background. Chromium-tanned leather footwear, which releases >3 ppm hexavalent Cr(VI), may pose a risk of sensitizing and eliciting allergic dermatitis. Objectives. To determine the content and potential release of chromium in leather footwear and to discuss the prevention of chromium contact...... allergy and dermatitis. Methods. Sixty pairs of leather shoes, sandals and boots (20 children's, 20 men's, and 20 women's) were purchased in Copenhagen and examined with X-ray fluorescence spectroscopy. Chromium was extracted according to the International Standard, ISO 17075. The detection level for Cr......(VI) was 3 ppm. Results. Chromium was identified in 95% of leather footwear products, the median content being 1.7% (range 0-3.3%). No association with store category or footwear category was found. A tendency for there to be a higher chromium content in footwear with high prices was shown (p(trend) = 0...

  7. Characteristics of chromium-allergic dermatitis patients prior to regulatory intervention for chromium in leather

    DEFF Research Database (Denmark)

    Bregnbak, David; Thyssen, Jacob P; Zachariae, Claus;

    2014-01-01

    BACKGROUND: Chromium-tanned leather articles currently constitute the most important cause of contact allergy to chromium in Denmark. A regulation on the content of hexavalent chromium in leather was adopted in November 2013 by the EU member states. OBJECTIVES: To characterize patients with...... chromium allergy and their disease, to serve as a baseline for future studies on the potential effect of the new regulation on chromium in leather. METHODS: A questionnaire case-control study was performed on 155 dermatitis patients with positive patch test reactions to potassium dichromate and a matched...... control group of 621 dermatitis patients. Comparisons were made by use of a χ(2) -test and the Mann-Whitney U-test. Logistic regression analyses were used to test for associations. RESULTS: Sixty-six per cent of chromium-allergic patients had a positive history of contact dermatitis caused by leather...

  8. Galvanic Interaction between Chalcopyrite and Pyrite with Low Alloy and High Carbon Chromium Steel Ball

    Directory of Open Access Journals (Sweden)

    Asghar Azizi

    2013-01-01

    Full Text Available This study was aimed to investigate the galvanic interaction between pyrite and chalcopyrite with two types of grinding media (low alloy and high carbon chromium steel ball in grinding of a porphyry copper sulphide ore. Results indicated that injection of different gases into mill altered the oxidation-reduction environment during grinding. High carbon chromium steel ball under nitrogen gas has the lowest galvanic current, and low alloy steel ball under oxygen gas had the highest galvanic current. Also, results showed that the media is anodic relative to pyrite and chalcopyrite, and therefore pyrite or chalcopyrite with a higher rest potential acted as the cathode, whilst the grinding media with a lower rest potential acted as the anode, when they are electrochemically contacted. It was also found that low alloy steel under oxygen produced the highest amount of EDTA extractable iron in the slurry, whilst high carbon chromium steel under nitrogen atmosphere led to the lowest amount.

  9. KINETIC STUDY OF CHROMIUM (III – PVP COMPLEX BY USING RADIO-TRACER TECHNIQUE

    Directory of Open Access Journals (Sweden)

    Ayan Das

    2013-02-01

    Full Text Available Complexes of metal ions with organic ligands play an important role in many fields of our life. These metal complexes are widely used in medical diagnosis and therapeutic analysis. These complexes are very familiar with radioisotopes exerting precise chemical and physical properties. Generally, chromium is considered as toxic and essential element depending on its oxidation state in the biological system. Here the dynamic dissociation constants of the complex of Chromium (III with excellent biocompatible polymer PVP (poly-N-vinylpyrolidone have been determined. The dissociation constants will give us the idea about the stability of the said complexes. As PVP is a good ligand with different metals within a wide range of pH. Ingestion techniques of radioisotopes to the biological systems may be nicely polished with the knowledge of this kinetic study with chromium. Green methods have been carried out during the whole period of the experiments to maintain the environmental friendly aspects.

  10. Chromium containing silica: effect of ultrasonic and purification methods on color products

    International Nuclear Information System (INIS)

    Chromium containing silica has numerous applications, such as: fiber-optics, luminescent materials, catalysts and pigments. In paint and ceramic pigments, chromate and dichromate ions, and silica are largely used. In this paper, it has been investigated the effect of pH, heating methods, and ultrasonic stirring on chromium oxidation states coprecipitated with silica. The material has been obtained from the coprecipitation of an aqueous diluted sodium silicate solution and acid chromium nitrate solution, purified by extractions and dialysis, and dried with microwave oven. Products have been characterized by X-ray powder diffraction, infrared vibrational spectroscopy and nitrogem adsorption isotherm (BET). Coprecipitates are non cristalline and the specific surface area value for sample obtained by conventional heating is smaller than the one for sample obtained by ultrasonic method. It is possible to obtain silica with different colors from blue due to the Cr(III), to yellow due to the Cr (VI), depending on the precipitation, purification and drying methods. (author)

  11. Chromium intensification of a processed dental radiograph

    International Nuclear Information System (INIS)

    This study was undertaken to determine (1) the usefulness of chromium intensifier to improve the diagnostic quality of light radiograph; (2) the effect of chromium intensifier on density contrast; and (3) the effect of various chemical concentrations on density. The following results obtained: 1. CHROMIUM INTENSIFIER is useful for intensifying and improving the diagnostic quality of a light dental radiograph. 2. The degree of intensification can be controlled by varying bleaching time, repeating the processing, varying the proportions of the potassium bicarbonate and hydrochloric acid solutions. 3. The image produced is black and permanent. 4. The intensifier increases density and contrast

  12. Chromium (VI) adsorption on boehmite

    Energy Technology Data Exchange (ETDEWEB)

    Granados-Correa, F. [Instituto Nacional de Investigaciones Nucleares, Apartado Postal 18-1027 Col., Escandon, Delegacion Miguel Hidalgo, C.P. 11801 Mexico, D.F. (Mexico)], E-mail: fgc@nuclear.inin.mx; Jimenez-Becerril, J. [Instituto Nacional de Investigaciones Nucleares, Apartado Postal 18-1027 Col., Escandon, Delegacion Miguel Hidalgo, C.P. 11801 Mexico, D.F. (Mexico)

    2009-03-15

    Boehmite was synthesized and characterized in order to study the adsorption behavior and the removal of Cr(VI) ions from aqueous solutions as a function of contact time, initial pH solution, amount of adsorbent and initial metal ion concentration, using batch technique. Adsorption data of Cr(VI) on the boehmite were analyzed according to Freundlich, Langmuir and Dubinin-Radushkevich (D-R) adsorption models. Thermodynamic parameters for the adsorption system were determinated at 293, 303, 313 and 323 K temperatures. The kinetic values and thermodynamic parameters from the adsorption process show that the Cr(VI) ions adsorption on boehmite is an endothermic and spontaneous process. These results show that the boehmite could be considered as a potential adsorbent for chromium ions in aqueous solutions.

  13. Chromium – An essential mineral

    Directory of Open Access Journals (Sweden)

    Merlin D Lindemann

    2009-09-01

    Full Text Available The status of chromium (Cr is not a new question. Cr is clearly an essential nutrient; this is a position that has been held for over three decades by individual scientists, groups of scientists, and governmental committees. The most uniform response across species with regard to Cr deficiency symptoms that are responsive to Cr supplementation are alterations in glucose metabolism with special reference to peripheral tissue sensitivity to insulin. Because the body’s ability to control blood glucose is critical to many life functions, and loss of ability to adequately control blood glucose can lead to many health debilitations, a consequence of Cr supplementation can be improved health and reproductive outcomes as well as improved survival rate or life span.

  14. Occupational asthma due to chromium.

    Science.gov (United States)

    Leroyer, C; Dewitte, J D; Bassanets, A; Boutoux, M; Daniel, C; Clavier, J

    1998-01-01

    We describe a 28-year-old subject employed as a roofer in a construction company since the age of 19, who developed work-related symptoms of a cough, shortness of breath, wheezing, rhinitis and headaches. A description of a usual day at work suggested that the symptoms worsened while he was sawing corrugated fiber cement. Baseline spirometry was normal, and there was a mild bronchial hyperresponsiveness to carbachol. A skin patch test to chromium was negative. A specific inhalation challenge showed a boderline fall in forced expiratory volume in 1 s (FEV1) after exposure to fiber cement dust. Exposure to nebulization of potassium dichromate (K2Cr2O7), at 0.1 mg.ml-1 for 30 min, was followed by an immediate fall by 20% FEV1. Simultaneously, a significant increase in bronchial hyperresponsiveness was demonstrated. PMID:9782225

  15. Spectroscopic and biological activity studies of the chromium-binding peptide EEEEGDD.

    Science.gov (United States)

    Arakawa, Hirohumi; Kandadi, Machender R; Panzhinskiy, Evgeniy; Belmore, Kenneth; Deng, Ge; Love, Ebony; Robertson, Preshus M; Commodore, Juliette J; Cassady, Carolyn J; Nair, Sreejayan; Vincent, John B

    2016-06-01

    While trivalent chromium has been shown at high doses to have pharmacological effects improving insulin resistance in rodent models of insulin resistance, the mechanism of action of chromium at a molecular level is not known. The chromium-binding and transport agent low-molecular-weight chromium-binding substance (LMWCr) has been proposed to be the biologically active form of chromium. LMWCr has recently been shown to be comprised of a heptapeptide of the sequence EEEEDGG. The binding of Cr(3+) to this heptapeptide has been examined. Mass spectrometric and a variety of spectroscopic studies have shown that multiple chromic ions bind to the peptide in an octahedral fashion through carboxylate groups and potentially small anionic ligands such as oxide and hydroxide. A complex of Cr and the peptide when administered intravenously to mice is able to decrease area under the curve in intravenous glucose tolerance tests. It can also restore insulin-stimulated glucose uptake in myotubes rendered insulin resistant by treating them with a high-glucose media. PMID:26898644

  16. Synthesis, characterization and catalytic activity of chromium substituted cobalt ferrospinels

    International Nuclear Information System (INIS)

    Chromium substituted cobalt ferrospinels were prepared by soft citrate gel method. The synthesized material was characterized by various physico-chemical methods. All the samples showed a single-phase cubic structure. Lattice constant varies from 8.389 to 8.323 A. Transmission electron microscopic study indicated the nanostructure of the catalysts while homogenous grain distribution was presented by scanning electron microscopic studies. The catalytic activity of the samples was investigated towards acetylation of phenols. The presence of active centers on the surface of the material was confirmed through pyridine adsorption studies. The surface acidity of the catalyst is responsible for better catalytic performance. The material was found to serve as a promising catalyst for acylation and benzoylation of phenols under solvent free condition. These catalysts are ∼100% selective towards o-acylation of phenols, a promising reaction for perfumery intermediates. The catalysts were seen to be reusable without any further treatment. Catalytic activities of cobalt, chromium and iron oxides were also investigated for comparison. The cobalt ferrospinel was found to have better catalytic activity as compared to the Cr-substituted ferrospinels and the pure oxides. Cobalt ferrite catalyst offers high yields in a short reaction time under solvent-free conditions.

  17. Synthesis, characterization and catalytic activity of chromium substituted cobalt ferrospinels

    Energy Technology Data Exchange (ETDEWEB)

    Hankare, P.P., E-mail: p_hankarep@rediffmail.com [Department of Chemistry, Shivaji University, Kolhapur, Maharashtra, 416 004 (India); Sankpal, U.B., E-mail: sankpalumesh@gmail.com [Department of Chemistry, Shivaji University, Kolhapur, Maharashtra, 416 004 (India); Patil, R.P. [Department of Chemistry, Shivaji University, Kolhapur, Maharashtra, 416 004 (India); Lokhande, P.D. [Department of Chemistry, University of Pune, Pune, Maharashtra, 411 007 (India); Sasikala, R. [Chemistry Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400 085 (India)

    2011-02-15

    Chromium substituted cobalt ferrospinels were prepared by soft citrate gel method. The synthesized material was characterized by various physico-chemical methods. All the samples showed a single-phase cubic structure. Lattice constant varies from 8.389 to 8.323 A. Transmission electron microscopic study indicated the nanostructure of the catalysts while homogenous grain distribution was presented by scanning electron microscopic studies. The catalytic activity of the samples was investigated towards acetylation of phenols. The presence of active centers on the surface of the material was confirmed through pyridine adsorption studies. The surface acidity of the catalyst is responsible for better catalytic performance. The material was found to serve as a promising catalyst for acylation and benzoylation of phenols under solvent free condition. These catalysts are {approx}100% selective towards o-acylation of phenols, a promising reaction for perfumery intermediates. The catalysts were seen to be reusable without any further treatment. Catalytic activities of cobalt, chromium and iron oxides were also investigated for comparison. The cobalt ferrospinel was found to have better catalytic activity as compared to the Cr-substituted ferrospinels and the pure oxides. Cobalt ferrite catalyst offers high yields in a short reaction time under solvent-free conditions.

  18. Simultaneous determination of chromium(III) and chromium(VI) in aqueous solutions by ion chromatography and chemiluminescence detection

    DEFF Research Database (Denmark)

    Gammelgaard, Bente; Jøns, O; Nielsen, B

    1992-01-01

    A method for the simultaneous determination of chromium(iii) and chromium(vi) in a flow system based on chemiluminescence was developed. A Dionex cation-exchange guard column was used to separate chromium(iii) from chromium(vi), and chromium(vi) was reduced by potassium sulfite, whereupon both sp....... The detection limit was 0.5 micrograms l-1 for both species. Data were in agreement with Zeeman-effect background corrected atomic absorption spectrometry measurements....

  19. AEROSOL BEHAVIOR IN CHROMIUM WASTE INCINERATION

    Institute of Scientific and Technical Information of China (English)

    Suyuan Yu

    2003-01-01

    Cr2O3 is considered as the dominant incineration product during the combustion disposal of chromium waste. A hydrogen/air diffusion flame was employed to simulate the industrial process of incineration. Cr2O3 aerosols were generated inside the flame by the gas phase reaction of chromium and oxygen. Chromium came from the rapid decomposition of chromium hexacarbonyl (Cr(CO)6) at room temperature and was carried into the combustion chamber by hydrogen. Aerosol and clusters can then be easily formed in the flame by nucleation and coagulation. A two dimensional Discrete-Sectional Model (DSM) was adopted to calculate the Cr2O3 aerosol behavior. The experimental measurement method was Dynamic Light Scattering. The numerically predicted results agreed well with those of the experimental measurement. Both results show that the Cr2O3 aerosol size reached about 70 nanometers at the flame top.

  20. Potentiometry: A Chromium (III) -- EDTA Complex

    Science.gov (United States)

    Hoppe, J. I.; Howell, P. J.

    1975-01-01

    Describes an experiment that involves the preparation of a chromium (III)-EDTA compound, a study of its infrared spectrum, and the potentiometric determination of two successive acid dissociation constants. (Author/GS)

  1. The soda-ash roasting of chromite ore processing residue for the reclamation of chromium

    Science.gov (United States)

    Antony, M. P.; Tathavadkar, V. D.; Calvert, C. C.; Jha, A.

    2001-12-01

    Sodium chromate is produced via the soda-ash roasting of chromite ore with sodium carbonate. After the reaction, nearly 15 pct of the chromium oxide remains unreacted and ends up in the waste stream, for landfills. In recent years, the concern over environmental pollution from hexavalent chromium (Cr6+) from the waste residue has become a major problem for the chromium chemical industry. The main purpose of this investigation is to recover chromium oxide present in the waste residue as sodium chromate. Cr2O3 in the residue is distributed between the two spinel solid solutions, Mg(Al,Cr)2O4 and γ-Fe2O3. The residue from the sodium chromate production process was analyzed both physically and chemically. The compositions of the mineral phases were determined by X-ray diffraction (XRD), scanning electron microscopy (SEM), and electron probe microanalysis (EPMA). The influence of alkali addition on the overall reaction rate is examined. The kinetics of the chromium extraction reaction resulting from the residue of the soda-ash roasting process under an oxidizing atmosphere is also investigated. It is shown that the experimental results for the roasting reaction can be best described by the Ginstling and Brounshtein (GB) equation for diffusion-controlled kinetics. The apparent activation energy for the roasting reaction was calculated to be between 85 and 90 kJ·mol-1 in the temperature range 1223 to 1473 K. The kinetics of leaching of Cr3+ ions using the aqueous phase from the process residue is also studied by treating the waste into acid solutions with different concentrations.

  2. Diminishing Chromium Use on Combined Chromium-Gambier Tanning Process Upon the Characteristics of Tanned Leather

    Directory of Open Access Journals (Sweden)

    A. Kasim

    2014-04-01

    Full Text Available The research was aimed to investigate the influence of minimizing chromium use on combined chromium-gambier process upon the characteristics of tanned leather. At the first stage of tanning process, chromium was used and in the second stage it was replaced by gambier. The raw material used was dried saline-preserved goat skin. The treatments applied on the tanning process were the different concentrations of chromium ranging from the highest level of 6% to the lowest level of 1% which was then re-tanned by using 8% concentration of gambier. The examination parameters included chemical and physical properties as well as visual investigation on the tanned leather in accordance with SNI-06-0463-1989-A. The result showed that the tanning process by using 2% chromium in the first step and 8% gambier in the second step was a treatment combination producing tanned leather that met the standard. The examination on tanned leather resulted from such treatment showed 56.33% rawhide, 17.45% of bound tannin, 31.22% of tanning level, tensile strength 386.30 kg/cm2, flexibility 31.91%, leather width 1.3 mm, density 0.75 g/cm3, the leather was quite elastic with light brownish color. In conclusion, minimizing the use of chromium in the combined tanning process of chromium and gambier can be implemented to the lowest of 2% chromium concentration and 8% gambier in the first and second step, respectively.

  3. Lateral stress evolution in chromium sulfide cermets with varying excess chromium

    Science.gov (United States)

    Petel, O. E.; Appleby-Thomas, G. J.; Wood, D. C.; Capozzi, A.; Nabavi, A.; Goroshin, S.; Frost, D. L.; Hazell, P. J.

    2016-04-01

    The shock response of chromium sulfide-chromium, a cermet of potential interest as a matrix material for ballistic applications, has been investigated at two molar ratios. Using a combustion synthesis technique allowed for control of the molar ratio of the material, which was investigated under near-stoichiometric (cermet) and excess chromium (interpenetrating composite) conditions, representing chromium:sulfur molar ratios of 1.15:1 and 4:1, respectively. The compacts were investigated via the plate-impact technique, which allowed the material to be loaded under a one-dimensional state of strain. Embedded manganin stress gauges were employed to monitor the temporal evolution of longitudinal and lateral components of stress in both materials. Comparison of these two components has allowed assessment of the variation of material shear strength both with impact pressure/strain-rate and time for the two molar ratio conditions. The two materials exhibited identical material strength despite variations in their excess chromium contents.

  4. Effect of water vapour on growth and adherence of chromia scales on pure chromium

    OpenAIRE

    Michalik, Marek

    2007-01-01

    The oxidation behaviour of chromium was studied in the temperature range 950 to 1050oC. A number of atmospheres such as Ar-O2, Ar-H2-H2O, and more complex N2-O2-H2O and N2-H2-H2O were used, to allow the effects of oxygen and water vapour partial pressures to be determined. It was shown that the oxide scale formed in Ar-O2 environments was dependent on the oxygen partial pressure. Decreasing the pO2 in such gas mixtures lowered the oxidation rate and improved scale adherence. Different behavio...

  5. Micromachined force sensors using thin film nickel–chromium piezoresistors

    International Nuclear Information System (INIS)

    Micromachined force/tactile sensors using nickel–chromium piezoresistors have been investigated experimentally and through finite-element analysis. The force sensors were designed with a suspended aluminum oxide (Al2O3) membrane and optimally placed piezoresistors to measure the strain in the membrane when deflected with an applied force. Different devices, each with varying size and shape of both the membrane and the piezoresistors, were designed, fabricated and characterized. The piezoresistors were placed into a half-Wheatstone bridge configuration with two active and two passive nickel–chromium resistors to provide temperature drift compensation. The force sensors were characterized using a load cell and a nanopositioner to measure the sensor response with applied load. Piezoresistive gauge factors in the range of 1–5.2 have been calculated for the thin film nichrome (NiCr 80/20 wt%) from the measured results. The force sensors were calculated to have a noise equivalent force of 65–245 nN. (paper)

  6. Serum chromium levels in gestational diabetes mellitus

    Directory of Open Access Journals (Sweden)

    P G Sundararaman

    2012-01-01

    Full Text Available Objective: To measure serum chromium level in women with gestational diabetes mellitus (GDM from Chennai, South India. Materials and Methods: Thirty women with gestational diabetes, 60 age matched controls. Inclusion criteria: Gestational age 22-28 weeks, age group 20-35 years. Exclusion Criteria: Gestational age beyond 28 weeks, malnutrition or presence of infection. Serum chromium was measured using inductive couple plasma emission spectrometer. Results: Serum chromium levels of women with GDM, 1.59+/-0.02 ng/ml (range: 0.16-4.0 ng/ml were lower than in controls (4.58+/-0.62 ng/ml; range 0.82-5.33 ng/ml (P < 0.001. However, there were no significant differences among cases and controls when subdivided by parity. Conclusions: Women with GDM from a South Indian city had lower levels of serum chromium compared to pregnant women without GDM. Studies may be done whether chromium supplementation is useful in this group of women.

  7. Occupational exposure to chromium(VI compounds

    Directory of Open Access Journals (Sweden)

    Jolanta Skowroń

    2015-07-01

    Full Text Available This article discusses the effect of chromium(VI (Cr(VI on human health under conditions of acute and chronic exposure in the workplace. Chromium(VI compounds as carcinogens and/or mutagens pose a direct danger to people exposed to them. If carcinogens cannot be eliminated from the work and living environments, their exposure should be reduced to a minimum. In the European Union the proposed binding occupational exposure limit value (BOELV for chromium(VI of 0.025 mg/m³ is still associated with high cancer risk. Based on the Scientific Commitee of Occupational Exposure Limits (SCOEL document chromium(VI concentrations at 0.025 mg/m³ increases the risk of lung cancer in 2–14 cases per 1000 exposed workers. Exposure to chromium(VI compounds expressed in Cr(VI of 0.01 mg Cr(VI/m3 is responsible for the increased number of lung cancer cases in 1–6 per 1000 people employed in this condition for the whole period of professional activity. Med Pr 2015;66(3:407–427

  8. [Occupational exposure to chromium(VI) compounds].

    Science.gov (United States)

    Skowroń, Jolanta; Konieczko, Katarzyna

    2015-01-01

    This article discusses the effect of chromium(VI) (Cr(VI)) on human health under conditions of acute and chronic exposure in the workplace. Chromium(VI) compounds as carcinogens and/or mutagens pose a direct danger to people exposed to them. If carcinogens cannot be eliminated from the work and living environments, their exposure should be reduced to a minimum. In the European Union the proposed binding occupational exposure limit value (BOELV) for chromium(VI) of 0.025 mg/m³ is still associated with high cancer risk. Based on the Scientific Commitee of Occupational Exposure Limits (SCOEL) document chromium(VI) concentrations at 0.025 mg/m³ increases the risk of lung cancer in 2-14 cases per 1000 exposed workers. Exposure to chromium(VI) compounds expressed in Cr(VI) of 0.01 mg Cr(VI)/m3; is responsible for the increased number of lung cancer cases in 1-6 per 1000 people employed in this condition for the whole period of professional activity. PMID:26325053

  9. Flashlamp-pumped lasing of chromium-doped GSG garnet

    International Nuclear Information System (INIS)

    The implications for the practical use of chromium:GSGG in lamp-pumped tunable lasers are discussed in this paper. The authors report here some major improvements in the performance of the flashlamp-pumped chromium:GSGG laser

  10. Remediation of groundwater contaminated by exa valent chromium. Part 1.: Treatment technologies

    International Nuclear Information System (INIS)

    Chromium compounds have been used in several industrial activities and they are often found in soil and groundwater of former industrial sites. Chromium exists in various oxidation states, but the trivalent and hexavalent oxidation ones are of major environmental concern due to their stability in the environment. In particular, Cr(V I) is highly soluble and mobile and is very toxic with mutagenic and carcinogenic effects. The present paper describes the main chemical, physical and toxicological properties of Cr(V I), its fate in the subsoil and both the conventional and innovative technologies for its removal from contaminated groundwater. The paper includes also a brief description of few interesting foreign case studies.

  11. Studies of Some Novel Chromium Pyridine Dicarboxylate Complexes

    OpenAIRE

    Chauhan Jayprakash S; Patel Rameshchandra P; Pandya Ajit V

    2014-01-01

    Chromium pyridine di-carboxylate complexes are synthesized from Chromium (III) with pyridine 2, 6- dicarboxylic acid, pyridine 2, 3 and 2, 5- dicarboxylic acids. Chromium forms colored complexes. Chromium (III) forms a violate complex with pyridine 2, 6- dicarboxylic acid and purple violate complex with pyridine 2, 3 and 2, 5- dicarboxylic acids. The job’s method indicates metal ligand ratio to be 1:2. The interpretation of UV-VIS spectra indicates octahedral geometry and IR spectra give clue...

  12. Adsorption and protein-induced metal release from chromium metal and stainless steel.

    Science.gov (United States)

    Lundin, M; Hedberg, Y; Jiang, T; Herting, G; Wang, X; Thormann, E; Blomberg, E; Wallinder, I Odnevall

    2012-01-15

    A research effort is undertaken to understand the mechanism of metal release from, e.g., inhaled metal particles or metal implants in the presence of proteins. The effect of protein adsorption on the metal release process from oxidized chromium metal surfaces and stainless steel surfaces was therefore examined by quartz crystal microbalance with energy dissipation monitoring (QCM-D) and graphite furnace atomic absorption spectroscopy (GFAAS). Differently charged and sized proteins, relevant for the inhalation and dermal exposure route were chosen including human and bovine serum albumin (HSA, BSA), mucin (BSM), and lysozyme (LYS). The results show that all proteins have high affinities for chromium and stainless steel (AISI 316) when deposited from solutions at pH 4 and at pH 7.4 where the protein adsorbed amount was very similar. Adsorption of albumin and mucin was substantially higher at pH 4 compared to pH 7.4 with approximately monolayer coverage at pH 7.4, whereas lysozyme adsorbed in multilayers at both investigated pH. The protein-surface interaction was strong since proteins were irreversibly adsorbed with respect to rinsing. Due to the passive nature of chromium and stainless steel (AISI 316) surfaces, very low metal release concentrations from the QCM metal surfaces in the presence of proteins were obtained on the time scale of the adsorption experiment. Therefore, metal release studies from massive metal sheets in contact with protein solutions were carried out in parallel. The presence of proteins increased the extent of metals released for chromium metal and stainless steel grades of different microstructure and alloy content, all with passive chromium(III)-rich surface oxides, such as QCM (AISI 316), ferritic (AISI 430), austentic (AISI 304, 316L), and duplex (LDX 2205). PMID:22014396

  13. Kinetics of combined reduction of Fe-Cr and Fe-Cr-Ni oxide systems

    International Nuclear Information System (INIS)

    Kinetic regularities of combined reduction of Fe-Cr and Fe-Cr-Ni oxide systems with hydrogen and solid carbon are investigated. Possibility of attaining high degree of reduction and decarbonization of iron-chromium-nickel alloys with chromium content up to 23% (by mass) using combined reduction of oxides at the temperature of 1573 K is shown

  14. Determination of chromium combined with DNA, RNA and proteins in chromium-rich brewer's yeast by NAA

    International Nuclear Information System (INIS)

    The content of chromium in the DNA, RNA and protein fractions separated from chromium-rich and normal brewer's yeast was determined by neutron activation analysis (NAA). Our results show that the extracted relative amounts and concentrations of DNA, RNA and proteins have no significant difference for two types of yeast, but the chromium content in DNA, RNA and proteins fractions extracted from the chromium-rich yeast are substantially higher than those from the normal. In addition, the concentration of chromium in DNA is much higher than that in RNA and proteins. It is evident that the inorganic chromium compounds can enter the yeast cell during the yeast cultivation in the chromium-containing culture medium and are converted into organic chromium species, which are combined with DNA, RNA and proteins. (author)

  15. Specific extraction of chromium(VI) using supercritical fluid extraction.

    Science.gov (United States)

    Foy, G P; Pacey, G E

    2000-02-01

    In some situations, it is no longer sufficient to give a total concentration of a metal. Instead, what is required to understand the potential toxicity of a sample is the concentration of metal species or oxidation state. When developing species specific methods, the major concern is that the integrity of the species ratio is not changed. In other words, the sample preparation or the analytical method will not convert metal ions from one oxidation state to another. Normal extraction techniques and chromatography methods have shown some tendencies to change species ratios. An ideal extraction method would extract the metal efficiently while retaining the metal's oxidation state. The properties of supercritical fluids should approach the ideal of retention of oxidation states. For example, the need for speciation of chromium is obvious since Cr(III) is considered an essential element while Cr(VI) is thought to be toxic and carcinogenic. This paper presents the results of a species specific extraction of Cr(VI) using two different carbamate derivatives as the chelator. Supercritical fluid extraction (SFE) coupled with a fluorinated dithiocarbamate and a methanol modifier allows extraction of 1 ppm Cr(VI) from a solid matrix with a recovery level of 88.4+/-2.57% using the NIST standard sample. The optimized conditions using the HP 7680 supercritical fluid extractor were: 0.1 ml of methanol, 0.05 ml of pure water, and 0.01 g of chelate via a saturation chamber. PMID:18967865

  16. Chromium allergy and dermatitis: prevalence and main findings

    DEFF Research Database (Denmark)

    Bregnbak, David; Johansen, Jeanne D.; Jellesen, Morten Stendahl;

    2015-01-01

    The history of chromium as an allergen goes back more than a century, and includesan interventional success with national legislation that led to significant changes inthe epidemiology of chromium allergy in construction workers. The 2015 EU Leather Regulation once again put a focus on chromium...

  17. 21 CFR 73.1326 - Chromium hydroxide green.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Chromium hydroxide green. 73.1326 Section 73.1326... COLOR ADDITIVES EXEMPT FROM CERTIFICATION Drugs § 73.1326 Chromium hydroxide green. (a) Identity. (1) The color additive chromium hydroxide green is principally hydrated chromic sesquioxide...

  18. 21 CFR 73.2326 - Chromium hydroxide green.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Chromium hydroxide green. 73.2326 Section 73.2326... COLOR ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2326 Chromium hydroxide green. (a) Identity and specifications.The color additive chromium hydroxide green shall conform in identity and specifications to...

  19. Hexavalent and trivalent chromium in leather: What should be done?

    Science.gov (United States)

    Moretto, Angelo

    2015-11-01

    Trivalent chromium compounds are used for leather tanning, and chromium may be released during use of leather goods. In certain instances, small amounts of hexavalent chromium can be formed and released. Both trivalent and hexavalent chromium can elicit allergic skin reaction in chromium sensitised subjects, the latter being significantly more potent. Induction of sensitisation only occurs after exposure to hexavalent chromium. A minority of subjects are sensitised to chromium, and in a fraction of these subjects allergic skin reaction have been described after wearing leather shoes or, less frequently, other leather goods. The evidence that in all these cases the reaction is related to hexavalent chromium is not always strong. The content of hexavalent chromium in leather is regulated in European Union, but rate of release rather than content is relevant for allergic skin reaction. The role of trivalent chromium appear much less relevant if at all. Modern tanning procedure do not pose significant risk due to either hexavalent or trivalent chromium. Dismissing bad quality and worn-off leather goods is relevant in reducing or eliminating the skin reaction. It should also be pointed out that shoe components or substances other than chromium in leather may cause allergic/irritative skin reactions. PMID:26361854

  20. SAFETY OF TRIVALENT CHROMIUM COMPLEXES USED IN NUTRIENT SUPPLEMENTS

    Science.gov (United States)

    Toxicity studies regarding trivalent chromium have often been completed under conditions that are not designed to reflect conditions that would be encountered under normal physiological conditions. We have shown that the incorporation of chromium into tissues of rats from chromium chloride and chro...

  1. Comparative Biosorption Studies of Hexavalent Chromium Ion onto Raw and Modified Palm Branches

    OpenAIRE

    Mona A. Shouman; Nady A. Fathy; Soheir A. Khedr; Amina A. Attia

    2013-01-01

    The waste of palm branches (PB) was tested for its ability to remove chromium (VI) from aqueous solution by batch and column experiments. Palm branches chemically modified with an oxidizing agent (sulphuric acid) then coated with chitosan and surfactant (hexadecyl trimethyl ammonium bromide surfactant, HDTMA), respectively, were carried out to improve the removal performance of PB. The results of their Cr (VI) removal performances are pH dependent. The adsorption data could be well interprete...

  2. Novel high chromium containing braze filler metals for heat exchanger applications

    Energy Technology Data Exchange (ETDEWEB)

    Rangaswamy, S.; Fortuna, D. [Sulzer Metco, Troy (United States)

    2007-07-01

    A new family of boron-free, high chromium containing braze filler metal compositions were developed (Amdry 105, Amdry 108, Amdry 805). Filler metal properties including metallurgical phases, melting range, flow, corrosion resistance and high temperature oxidation resistance are reported. Additionally, the technical and economical advantages of using these new filler metals in fabricating flat plate type of heat exchangers and metallic catalytic converters is discussed. (orig.)

  3. Collisional properties of trapped cold chromium atoms

    CERN Document Server

    Pavlovich, Z; Côté, R; Sadeghpour, H R; Pavlovic, Zoran; Roos, Bjoern O.; Côté, Robin

    2004-01-01

    We report on calculations of the elastic cross section and thermalization rate for collision between two maximally spin-polarized chromium atoms in the cold and ultracold regimes, relevant to buffer-gas and magneto-optical cooling of chromium atoms. We calculate ab initio potential energy curves for Cr2 and the van der Waals coefficient C6, and construct interaction potentials between two colliding Cr atoms. We explore the effect of shape resonances on elastic cross section, and find that they dramatically affect the thermalization rate. Our calculated value for the s-wave scattering length is compared in magnitude with a recent measurement at ultracold temperatures.

  4. Bioremediation Of Heavy Metal Toxicity-With Special Reference To Chromium

    Directory of Open Access Journals (Sweden)

    Suranjana (Arora Ray and Manas Kanti Ray

    2009-12-01

    Full Text Available All metals are toxic and our bodies require special transport and handling mechanisms to keep them from harming us. The toxicity occurs in humans due to environmental pollution via soil or water contamination or due to occupational exposure. Some of these metals are useful to us in low concentrations but are highly toxic in higher concentrations. These metal toxicity cause serious morbidity and mortality. Among these heavy metals chromium toxicity can cause serious carcinogenic, genotoxic and immunotoxic effects in humans and animals. Of the two oxidative states in which chromium can be present Cr (III and Cr (VI, Cr (III is essential for the human system whereas Cr (VI has harmful effects. So, one of the ways of reducing Cr-toxicity in Cr-contaminated soil and water is to reduce soluble Cr (VI to insoluble Cr (III. This can be achieved by microbial activity and is a cost-effective and environment friendly method. Many genera of microbes like Bacillus, Enterobacter, Escherichia, Pseudomonas and also some yeasts and fungi help in bioremediation of metals and chromium-contaminated soil and water by bio-absorption and bioaccumulation of chromium. The potential of bioremediation of metal toxicity and its impact on the environment is discussed.

  5. Chromium accumulation potential of Zea mays grown under four different fertilizers.

    Science.gov (United States)

    Dheeba, B; Sampathkumar, P; Kannan, K

    2014-12-01

    Chromium (Cr) contamination in soil is a growing concern in sustainable agriculture production and food safety. We performed pot experiment with chromium (30 mg/soil) to assess the accumulation potential of Zea mays and study the influence of four fertilizers, viz. Farm Yard Manure (FYM), NPK, Panchakavya (PK) and Vermicompost (VC) with respect to Cr accumulation. The oxidative stress and pigment (chlorophyll) levels were also examined. The results showed increased accumulation of chromium in both shoots and roots of Zea mays under FYM and NPK supply, and reduced with PK and VC. While the protein and pigment contents decreased in Cr treated plants, the fertilizers substantiated the loss to overcome the stress. Similarly, accumulation of Cr increased the levels of antioxidant enzymes such as catalase (CAT), superoxide dismutase (SOD), and peroxidase (POD) indicating the enhanced damage control activity. However, these levels were relatively low in plants supplemented with fertilizers. Our results confirm that the maize can play an effective role in bioremediation of soils polluted with chromium, particularly in supplementation with fertilizers such as farm yard manure and NPK. PMID:25651615

  6. Influence of nitrogen on the structure and properties of chromium, chromium-molybdenum and chromium-manganese steels

    International Nuclear Information System (INIS)

    Phase transformations, precipitation processes and properties of the chromium, chromium-molybdenum and chromium-manganese steels with a high content of nitrogen as the dependence on thermal treatment were investigated. In case of Fe-0.08C-18Cr-18Mn-N and Fe-0.08C-18Cr-18Mn-2Mo-N steels the samples in the state after solution at temperature 1050oC and 1150oC and 1250oC and after subsequent annealing in 600oC and 800oC were investigated. heat treatment of the Fe-0.5C-10Cr-N and Fe-0.5C-10Cr-1Mo-N steels included austenitizment from 1000oC with air cooling and hardening from 1000oC with oil cooling and tempering in 650oC and 750oC in two hours with cooling in the air. These investigations show that the influence of nitrogen as an alloy element on the phase transformations, precipitation processes, mechanical and corrosion properties is connected with the presence of molybdenum and chromium in the steel. Nitrogen with these elements creates complex ions with the coordinate number 6. This statement is formed on the base of both calculations and investigation results. (author)

  7. Electrodeposition of black chromium thin films from trivalent chromium-ionic liquid solution

    OpenAIRE

    Eugénio, S.; Vilar, Rui; C. M. Rangel; Baskaran, I.

    2009-01-01

    In the present study, black chromium thin films were electrodeposited from a solution of 1-butyl-3- methylimidazolium tetrafluoroborate ([BMIm][BF4] ionic liquid containing trivalent chromium (Cr(III)). Homogeneous and well adherent coatings have been obtained on nickel, copper and stainless steel substrates. The nucleation and growth of the films were investigated by cyclic voltammetry and current-density/time transient techniques. SEM/EDS, XPS and XRD were used to study the morphology, chem...

  8. Reduction of Hexavalent Chromium by Viable Cells of Chromium Resistant Bacteria Isolated from Chromite Mining Environment

    OpenAIRE

    Satarupa Dey; Baishali Pandit; A. K. Paul

    2014-01-01

    Environmental contamination of hexavalent chromium [Cr(VI)] is of serious concern for its toxicity as well as mutagenic and carcinogenic effects. Bacterial chromate reduction is a cost-effective technology for detoxification as well as removal of Cr(VI) from polluted environment. Chromium resistant and reducing bacteria, belonging to Arthrobacter, Pseudomonas, and Corynebacterium isolated from chromite mine overburden and seepage samples of Orissa, India, were found to tolerate 12–18 mM Cr(VI...

  9. Mechanical properties of metal-ceramic systems from nickel-chromium and cobalt-chromium alloys

    OpenAIRE

    Mirković Nemanja

    2007-01-01

    Background/Aim. Metal-ceramic bond strength and alloys' elastic modulus clearly determine the potential of alloy application, because the ceramic integrity during mastication depends on these two characteristics. The aim of this study was to evaluate metal-ceramic bond strength and elastic modulus of cobalt-chromium alloys in making porcelainfused- to-metal restorations, regarding the application of the most frequent nickel-chromium alloy. Methods. The research was performed as an experimenta...

  10. Influence of chromium salts on increased lipid peroxidation and differential pattern in antioxidant metabolism in Pistia stratiotes L

    OpenAIRE

    RishiKesh Upadhyay; Sanjib Kumar Panda

    2010-01-01

    In this work, the changing effect of different concentrations (0, 0.01, 0.1, 1, 10mM) of hexavalent and trivalent chromium on different biochemical parameters along with antioxidant enzymes was investigated on water lettuce (Pistia stratiotes L.) in order to know the possible involvement of this metal in oxidative injury, besides the activities of antioxidant enzymes leading to biochemical and oxidative aberration induced by elevated concentrations. Both in roots and shoots, Cr produced a sig...

  11. Chromium-manganese steels of transition class

    International Nuclear Information System (INIS)

    Possibilities of nickel replacing by manganese and preparing the same level of mechanical properties as in chromium-nickel steels due to γ-α transformations taking place during property tests, are studied. Chromium-manganese steels with the composition of 0.05-0.1%C, 13-14%Cr, 5.0-6.5%Mn, 0.2-0.5%Si, 0.03-0.13%N, 0.05-0.01%Al and additionally alloyed 0.3-2.0%Cu, 0.05-0.6%V, 0.3-1.0%Mo, 0.02-0.05%Ca in various combinations have been melted. It is shown, that using alloying and heat treatment one can control the phase composition, austenite resistance to martensite transformation during loading and mechanical properties of chromium-manganese steels of the transition class. The use of the phase transformation in the process of testing determines the level of mechanical properties. The optimum development of the transformation accompanied by a sufficient development of processes of hardening and microstresses relaxation permits to obtain a high level of mechanical properties: σsub(B)=1500 MPa, σsub(0.2)-1130MPa, delta=15%, psi=37%, asub(H)=1000 kJ/msup(2) which exceeds the level for chromium-nickel steels. Steels have a lower cost and do not require any complecated heat treatment regime

  12. Defect structure of electrodeposited chromium layers

    International Nuclear Information System (INIS)

    Positron annihilation spectroscopy was applied to study the effects of pre-treatment and composition of substrates on the quality and defect structure of electrodeposited thick chromium coatings. The results show that both parameters are important, and a scenario is proposed why the mechanically polished substrate gives more defective film than the electro polished one.

  13. Defect structure of electrodeposited chromium layers

    CERN Document Server

    Marek, T; Vertes, A; El-Sharif, M; McDougall, J; Chisolm, C U

    2000-01-01

    Positron annihilation spectroscopy was applied to study the effects of pre-treatment and composition of substrates on the quality and defect structure of electrodeposited thick chromium coatings. The results show that both parameters are important, and a scenario is proposed why the mechanically polished substrate gives more defective film than the electro polished one.

  14. Flashlamp-pumped lasing of chromium: GSGG

    International Nuclear Information System (INIS)

    Lasing action in chromium-doped gadolinium scandium gallium garnet (Cr:GSGG) is well established for both CW/sup (1)/ and flashlamp/sup (2)/ pumping. This paper describes an investigation of flashlamp-pumped Cr:GSGG lasers and indicates some of the factors which limit performance

  15. Trace Elements Excluding Iron - Chromium and Zinc

    Science.gov (United States)

    The percentage of middle-aged US adults who are participating in leisure-time physical activities is growing. These adults also seek credible information about specific supplements that the public press routinely describes as necessary to enable increases in physical performance. Chromium and zinc a...

  16. HEALTH ASSESSMENT DOCUMENT FOR CHROMIUM. FINAL REPORT

    Science.gov (United States)

    The full document represents a comprehensive data base that considers all sources of chromium in the environment, the likelihood for its exposure to humans, and the possible consequences to man and lower organisms from its absorption. This information is integrated into a format ...

  17. 29 CFR 1926.1126 - Chromium (VI).

    Science.gov (United States)

    2010-07-01

    ... CFR 1926.51 Where skin contact with chromium (VI) occurs, the employer shall provide washing facilities in conformance with 29 CFR 1926.51. Eating and drinking areas provided by the employer shall also... requirements of the Hazard Communication Standard, 29 CFR 1910.1200. (3) Cleaning and replacement. (i)...

  18. 29 CFR 1910.1026 - Chromium (VI).

    Science.gov (United States)

    2010-07-01

    ... CFR 1910.141. Where skin contact with chromium (VI) occurs, the employer shall provide washing facilities in conformance with 29 CFR 1910.141. Eating and drinking areas provided by the employer shall also... requirements of the Hazard Communication Standard, 29 CFR 1910.1200. (3) Cleaning and replacement. (i)...

  19. 29 CFR 1915.1026 - Chromium (VI).

    Science.gov (United States)

    2010-07-01

    ... CFR 1910.141. Where skin contact with chromium (VI) occurs, the employer shall provide washing facilities in conformance with 29 CFR 1915.97. Eating and drinking areas provided by the employer shall also... requirements of the Hazard Communication Standard, 29 CFR 1910.1200. (3) Cleaning and replacement. (i)...

  20. Biological groundwater treatment for chromium removal at low hexavalent chromium concentrations.

    Science.gov (United States)

    Mamais, Daniel; Noutsopoulos, Constantinos; Kavallari, Ioanna; Nyktari, Eleni; Kaldis, Apostolos; Panousi, Eleni; Nikitopoulos, George; Antoniou, Kornilia; Nasioka, Maria

    2016-06-01

    The objective of this work is to develop and evaluate biological groundwater treatment systems that will achieve hexavalent chromium reduction and total chromium removal from groundwater at hexavalent chromium (Cr(VI)) groundwater concentrations in the 0-200 μg/L range. Three lab-scale units operated, as sequencing batch reactors (SBR) under aerobic, anaerobic and anaerobic-aerobic conditions. All systems received groundwater with a Cr(VI) content of 200 μg/L. In order to support biological growth, groundwater was supplemented with milk, liquid cheese whey or a mixture of sugar and milk to achieve a COD concentration of 200 mg/L. The results demonstrate that a fully anaerobic system or an anaerobic-aerobic system dosed with simple or complex external organic carbon sources can lead to practically complete Cr(VI) reduction to Cr(III). The temperature dependency of maximum Cr(VI) removal rates can be described by the Arrhenius relationship. Total chromium removal in the biological treatment systems was not complete because a significant portion of Cr(III) remained in solution. An integrated system comprising of an anaerobic SBR followed by a sand filter achieved more than 95% total chromium removal thus resulting in average effluent total and dissolved chromium concentrations of 7 μg/L and 3 μg/L, respectively. PMID:26971177

  1. Nephrotoxic and hepatotoxic effects of chromium compounds in rats

    Energy Technology Data Exchange (ETDEWEB)

    Laborda, R.; Diaz-Mayans, J.; Nunez, A.

    1986-03-01

    The nephrotoxic, hepatotoxic and cardiotoxic actions of hexavalent chromium compounds, as well as their effects on lung, blood and circulation may contribute to the fatal outcome of chromium intoxication. Although trivalent chromium have been regarded as relatively biologically inert, there are a few salts of chromium III that have been found to be carcinogenic when inhaled, ingested or brought in contact with the tissues. Sensitive persons and industry workers have been subjects of dermatitis, respiratory tract injuries and digestive ulcers due to chromium compounds. In this work, the authors have studied the effect of trivalent and hexavalent chromium compounds on rats measuring the transaminases (GOT and GPT), urea and creatinine levels in serum of chromium poisoned animals at different times.

  2. The Chromium is an essential element in the human

    International Nuclear Information System (INIS)

    The Chromium is an essential element for human and animals, because it a preponderant function in the insulin metabolism as a glucose tolerance factor (GTF). The deficiency of chromium engenders a deterioration in the glucose metabolism due to bad efficiency of insulin. Because the importance of this element an exhaustive reference review was made and this presents some studies realized in laboratory animals and in human beings where it is prove with resuits the effect of chromium over the improvement of patients with non-insulin dependant diabetes. Three substances are presented as chromium active biological forms: a material rich in chromium known as glucose tolerance factor, chromium picolinate and a substance of low molecular weight LMWCr in its forms of apo and holo that contains chromium and it links the insulin receptor and improves its activity. Also this paper presents information about the condition of diabetes in Costa Rica. (Author)

  3. Reaction of chromium(VI) with glutathione or with hydrogen peroxide: identification of reactive intermediates and their role in chromium(VI)-induced DNA damage.

    OpenAIRE

    Aiyar, J; Berkovits, H J; Floyd, R A; Wetterhahn, K E

    1991-01-01

    The types of reactive intermediates generated upon reduction of chromium(VI) by glutathione or hydrogen peroxide and the resulting DNA damage have been determined. In vitro, reaction of chromium(VI) with glutathione led to formation of two chromium(V) complexes and the glutathione thiyl radical. When chromium(VI) was reacted with DNA in the presence of glutathione, chromium-DNA adducts were obtained, with no DNA strand breakage. The level of chromium-DNA adduct formation correlated with chrom...

  4. Graphitization in chromium cast iron

    OpenAIRE

    LECOMTE-BECKERS, Jacqueline; Terziev, L.; Breyer, J. P.

    1998-01-01

    Some trials with graphite Hi-Cr iron rolls have been done mainly in Japan, for the rolling of stainless steel. This material could lead to good compromise between oxidation, wear and thermal behaviour. By using thermal analysis and resistometry, the conditions for secondary graphite formation have been studied. The amount and volume of free graphite may be strongly increased by a suitable heat treatment, allowing a good thermal conductivity as well as high wear and mechanical properties.

  5. Design and performance of chromium mist generator

    Directory of Open Access Journals (Sweden)

    Tirgar Aram

    2006-01-01

    Full Text Available Chromium mist generator is an essential tool for conducting researches and making science-based recommendations to evaluate air pollution and its control systems. The purpose of this research was to design and construct a homogenous chromium mist generator and the study of some effective factors including sampling height and distances between samplers in side-by-side sampling on chromium mist sampling method. A mist generator was constructed, using a chromium electroplating bath in pilot scale. Concentration of CrO3 and sulfuric acid in plating solution was 125 g L-1 and 1.25 g L-1, respectively. In order to create permanent air sampling locations, a Plexiglas cylindrical chamber (75 cm height, 55 cm i.d was installed the bath overhead. Sixty holes were produced on the chamber in 3 rows (each 20. The distance between rows and holes was 15 and 7.5 cm, respectively. Homogeneity and effective factors were studied via side-by-side air sampling method. So, 48 clusters of samples were collected on polyvinyl chloride (PVC filters housed in sampling cassettes. Cassettes were located in 35, 50, and 65 cm above the solution surface with less than 7.5 and/or 7.5-15 cm distance between heads. All samples were analyzed according to the NIOSH method 7600. According to the ANOVA test, no significant differences were observed between different sampling locations in side-by-side sampling (P=0.82 and between sampling heights and different samplers distances (P=0.86 and 0.86, respectively. However, there were notable differences between means of coefficient of variations (CV in various heights and distances. It is concluded that the most chromium mist homogeneity could be obtained at height 50 cm from the bath solution surface and samplers distance of < 7.5 cm.

  6. Elementary surface processes during reactive magnetron sputtering of chromium

    International Nuclear Information System (INIS)

    The elementary surface processes occurring on chromium targets exposed to reactive plasmas have been mimicked in beam experiments by using quantified fluxes of Ar ions (400–800 eV) and oxygen atoms and molecules. For this, quartz crystal microbalances were previously coated with Cr thin films by means of high-power pulsed magnetron sputtering. The measured growth and etching rates were fitted by flux balance equations, which provided sputter yields of around 0.05 for the compound phase and a sticking coefficient of O2 of 0.38 on the bare Cr surface. Further fitted parameters were the oxygen implantation efficiency and the density of oxidation sites at the surface. The increase in site density with a factor 4 at early phases of reactive sputtering is identified as a relevant mechanism of Cr oxidation. This ion-enhanced oxygen uptake can be attributed to Cr surface roughening and knock-on implantation of oxygen atoms deeper into the target. This work, besides providing fundamental data to control oxidation state of Cr targets, shows that the extended Berg's model constitutes a robust set of rate equations suitable to describe reactive magnetron sputtering of metals

  7. Dietary chromium and nickel enhance UV-carcinogenesis in skin of hairless mice

    International Nuclear Information System (INIS)

    The skin cancer enhancing effect of chromium (in male mice) and nickel in UVR-irradiated female Skh1 mice was investigated. The dietary vitamin E and selenomethionine were tested for prevention of chromium-enhanced skin carcinogenesis. The mice were exposed to UVR (1.0 kJ/m2 3x weekly) for 26 weeks either alone, or combined with 2.5 or 5.0 ppm potassium chromate, or with 20, 100 or 500 ppm nickel chloride in drinking water. Vitamin E or selenomethionine was added to the lab chow for 29 weeks beginning 3 weeks before the start of UVR exposure. Both chromium and nickel significantly increased the UVR-induced skin cancer yield in mice. In male Skh1 mice, UVR alone induced 1.9 ± 0.4 cancers/mouse, and 2.5 or 5.0 ppm potassium chromate added to drinking water increased the yields to 5.9 ± 0.8 and 8.6 ± 0.9 cancers/mouse, respectively. In female Skh1 mice, UVR alone induced 1.7 ± 0.4 cancers/mouse, and the addition of 20, 100 or 500 ppm nickel chloride increased the yields to 2.8 ± 0.9, 5.6 ± 0.7 and 4.2 ± 1.0 cancers/mouse, respectively. Neither vitamin E nor selenomethionine reduced the cancer yield enhancement by chromium. These results confirm that chromium and nickel, while not good skin carcinogens per se, are enhancers of UVR-induced skin cancers in Skh1 mice. Data also suggest that the enhancement of UVR-induced skin cancers by chromate may not be oxidatively mediated since the antioxidant vitamin E as well as selenomethionine, found to prevent arsenite-enhanced skin carcinogenesis, failed to suppress enhancement by chromate

  8. Chromium stable isotope systematic – implications for the redox evolution of the earth

    DEFF Research Database (Denmark)

    Døssing, Lasse Nørbye

    The isotopic composition of chromium (Cr) holds great promise as a paleo-redox proxy.Whereas the reduction of oxidized Cr(VI) to Cr(III) yields a well-defined kineticfractionation, the fractionation imparted during oxidative weathering is only described theoretically. This thesis demonstrates that...... Cr isotopes fractionate during oxidative weathering of modern soil systems. The result is the retention of light Cr(III) and the release of heavy Cr(VI) to runoff. Deviations in Cr isotope compositions from mantle inventory values are ultimately attributed to oxidative weathering in modern systems...... and thus indicate the presence of oxidizing redox species. To track paleo-redox processes deep in the Earth’s history, a number of ancient soil horizons (e.g. the Drakenstein and Nsuze paleosols) formed ~2.2 and ~3.0 billion years ago have been analyzed. These horizons document similar behavior of Cr...

  9. Ultrasound-assisted dispersive liquid-liquid microextraction for the speciation of traces of chromium using electrothermal atomic absorption spectrometry.

    Science.gov (United States)

    López-García, Ignacio; Briceño, Marisol; Vicente-Martínez, Yesica; Hernández-Córdoba, Manuel

    2013-10-15

    A microextraction procedure for the speciation of very low concentrations (0.005-0.2 µg L(-1)) of chromium is discussed. To the aqueous sample (10 mL), diluted hydrochloric acid, sodium chloride and a small amount of tributylphosphate (80 µL) are incorporated, and the mixture is submitted to ultrasounds for 10 min. The organic phase recovered after centrifuging is injected into the electrothermal atomizer, and the signal due to hexavalent chromium obtained. The repetition of the procedure using another aliquot in which all the chromium present is oxidized to Cr (VI) allows the Cr(III) content to be obtained by difference. The enrichment factor is 240 and the detection limit 0.002 µg L(-1) chromium. The relative standard deviation for ten consecutive microextractions of a 0.1 µg L(-1) chromium solution is close to 8%. The procedure is applied to waters and to the leachates obtained from low cost toys made of plastic materials. PMID:24054574

  10. Liquid-liquid extraction of chromium (VI) from sulfuric acid solutions using tri-n-dodecylamine/kerosene

    International Nuclear Information System (INIS)

    Extraction of chromium (VI) from sulfuric acid solutions with tri-n-dodecylamine containing octanol-1 as a modifier in kerosene was investigated. All parameters influencing the extraction of chromium (VI) (time of agitation, concentrations of chromium (VI), sulfuric acid, tri-n-dodecylamine and temperature) were studied. Forst of all, tri-n-dodecylamine reacts with sulfuric acid to form tri-n-dodecylamine sulfate and bisulfate salts, then, dichromate ions is extracted by amine bisulfate. The mathematical treatment of the obtained date enabled us to calculate the formation of equilibrium constant of (TDAH)2SO4 TDAHHSO4 and (TDAH)2 Cγ2O7 at 25 Centigrade and have been found to be K1=109.642(14/mol4), K2= 10-0.899(L/mol) and Kex 1010.55 respectively. Stripping of more than 99% of chromium (VI) from the organic phase of tri-n-dodecylamine/kerosene can be easily achieved in two stages using 0.05 M sodium carbonate solution. The synergistic effect of tri-n-butylphosphate and tri-n-octylphosphine oxide on the extraction of chromium (VI) were also studied. (author)

  11. Effects of Maternal Chromium Restriction on the Long-Term Programming in MAPK Signaling Pathway of Lipid Metabolism in Mice.

    Science.gov (United States)

    Zhang, Qian; Sun, Xiaofang; Xiao, Xinhua; Zheng, Jia; Li, Ming; Yu, Miao; Ping, Fan; Wang, Zhixin; Qi, Cuijuan; Wang, Tong; Wang, Xiaojing

    2016-01-01

    It is now broadly accepted that the nutritional environment in early life is a key factor in susceptibility to metabolic diseases. In this study, we evaluated the effects of maternal chromium restriction in vivo on the modulation of lipid metabolism and the mechanisms involved in this process. Sixteen pregnant C57BL mice were randomly divided into two dietary treatments: a control (C) diet group and a low chromium (L) diet group. The diet treatment was maintained through gestation and lactation period. After weaning, some of the pups continued with either the control diet or low chromium diet (CC or LL), whereas other pups switched to another diet (CL or LC). At 32 weeks of age, serum lipid metabolism, proinflammatory indexes, oxidative stress and anti-oxidant markers, and DNA methylation status in adipose tissue were measured. The results indicated that the maternal low chromium diet increased body weight, fat pad weight, serum triglyceride (TG), low-density lipoprotein cholesterol (LDL), tumor necrosis factor-α (TNF-α), malondialdehyde (MDA), and oxidized glutathione (GSSG). There was a decrease in serum reduced/oxidized glutathione (GSH/GSSG) ratio at 32 weeks of age in female offspring. From adipose tissue, we identified 1214 individual hypomethylated CpG sites and 411 individual hypermethylated CpG sites in the LC group when compared to the CC group. Pathway analysis of the differential methylation genes revealed a significant increase in hypomethylated genes in the mitogen-activated protein kinase (MAPK) signaling pathway in the LC group. Our study highlights the importance of the MAPK signaling pathway in epigenetic changes involved in the lipid metabolism of the offspring from chromium-restricted dams. PMID:27517955

  12. Effects of Maternal Chromium Restriction on the Long-Term Programming in MAPK Signaling Pathway of Lipid Metabolism in Mice

    Science.gov (United States)

    Zhang, Qian; Sun, Xiaofang; Xiao, Xinhua; Zheng, Jia; Li, Ming; Yu, Miao; Ping, Fan; Wang, Zhixin; Qi, Cuijuan; Wang, Tong; Wang, Xiaojing

    2016-01-01

    It is now broadly accepted that the nutritional environment in early life is a key factor in susceptibility to metabolic diseases. In this study, we evaluated the effects of maternal chromium restriction in vivo on the modulation of lipid metabolism and the mechanisms involved in this process. Sixteen pregnant C57BL mice were randomly divided into two dietary treatments: a control (C) diet group and a low chromium (L) diet group. The diet treatment was maintained through gestation and lactation period. After weaning, some of the pups continued with either the control diet or low chromium diet (CC or LL), whereas other pups switched to another diet (CL or LC). At 32 weeks of age, serum lipid metabolism, proinflammatory indexes, oxidative stress and anti-oxidant markers, and DNA methylation status in adipose tissue were measured. The results indicated that the maternal low chromium diet increased body weight, fat pad weight, serum triglyceride (TG), low-density lipoprotein cholesterol (LDL), tumor necrosis factor-α (TNF-α), malondialdehyde (MDA), and oxidized glutathione (GSSG). There was a decrease in serum reduced/oxidized glutathione (GSH/GSSG) ratio at 32 weeks of age in female offspring. From adipose tissue, we identified 1214 individual hypomethylated CpG sites and 411 individual hypermethylated CpG sites in the LC group when compared to the CC group. Pathway analysis of the differential methylation genes revealed a significant increase in hypomethylated genes in the mitogen-activated protein kinase (MAPK) signaling pathway in the LC group. Our study highlights the importance of the MAPK signaling pathway in epigenetic changes involved in the lipid metabolism of the offspring from chromium-restricted dams. PMID:27517955

  13. TEM characterisation of stress corrosion cracks in nickel based alloys: effect of chromium content and chemistry of environment

    International Nuclear Information System (INIS)

    Stress corrosion cracking (SCC) is a damaging mode of alloys used in pressurized water reactors, particularly of nickel based alloys constituting the vapour generator tubes. Cracks appear on both primary and secondary sides of the tubes, and more frequently in locations where the environment is not well defined. SCC sensitivity of nickel based alloys depends of their chromium content, which lead to the replacement of alloy 600 (15 % Cr) by alloy 690 (30 % Cr) but this phenomenon is not yet very well understood. The goal of this thesis is two fold: i) observe the effect of chromium content on corrosion and ii) characterize the effect of environment on the damaging process of GV tubes. For this purpose, one industrial tube and several synthetic alloys - with controlled chromium content - have been studied. Various characterisation techniques were used to study the corrosion products on the surface and within the SCC cracks: SIMS; TEM - FEG: thin foil preparation, HAADF, EELS, EDX. The effect of chromium content and surface preparation on the generalised corrosion was evidenced for synthetic alloys. Moreover, we observed the penetration of oxygen along triple junctions of grain boundaries few micrometers under the free surface. SCC tests show the positive effect of chromium for contents varying from 5 to 30 % wt. Plastic deformation induces a modification of the structure, and thus of the protective character, of the internal chromium rich oxide layer. SCC cracks which developed in different chemical environments were characterised by TEM. The oxides which are formed within the cracks are different from what is observed on the free surface, which reveals a modification of medium and electrochemical conditions in the crack. Finally we were able to evidence some structural characteristics of the corrosion products (in the cracks and on the surface) which turn to be a signature of the chemical environment. (author)

  14. Iron -chromium alloys and free surfaces: from ab initio calculations to thermodynamic modeling

    International Nuclear Information System (INIS)

    Ferritic steels possibly strengthened by oxide dispersion are candidates as structural materials for generation IV and fusion nuclear reactors. Their use is limited by incomplete knowledge of the iron-chromium phase diagram at low temperatures and of the phenomena inducing preferential segregation of one element at grain boundaries or at surfaces. In this context, this work contributes to the multi-scale study of the model iron-chromium alloy and their free surfaces by numerical simulations. This study begins with ab initio calculations of properties related to the mixture of atoms of iron and chromium. We highlight complex dependency of the magnetic moments of the chromium atoms on their local chemical environment. Surface properties are also proving sensitive to magnetism. This is the case of impurity segregation of chromium in iron and of their interactions near the surface. In a second step, we construct a simple energy model for high numerical efficiency. It is based on pair interactions on a rigid lattice to which are given local chemical environment and temperature dependencies. With this model, we reproduce the ab initio results at zero temperature and experimental results at high temperature. We also deduce the solubility limits at all intermediate temperatures with mean field approximations that we compare to Monte Carlo simulations. The last step of our work is to introduce free surfaces in our model. We then study the effect of ab initio calculated bulk and surface properties on surface segregation.Finally, we calculate segregation isotherms. We therefore propose an evolution model of surface composition of iron-chromium alloys as a function of bulk composition. which are given local chemical environment and temperature dependencies. With this model, we reproduce the ab initio results at zero temperature and experimental results at high temperature. We also deduce the solubility limits at all intermediate temperatures with mean field approximations that

  15. Influence of Silica on the Lime-Free Roasting of Chromium-Containing Slag

    Science.gov (United States)

    Yu, Kai-ping; Chen, Bo; Zhang, Hong-ling; Liu, Yuan-yue; Duan, Shao-yong; Xu, Hong-bin; Zhang, Yi

    2016-02-01

    The evolution of silica during the lime-free roasting and their roles were investigated using chromium-containing slag with high content of ferric oxide and silica. The siliceous salt phases were analyzed by means of X-ray diffraction, scanning electron microscope, and energy-dispersive X-ray spectroscopy. The reaction rule involved with silicon-containing compounds in the roasting process was also discussed. The results showed that both oxidation of Cr2O3 and leaching of Na2CrO4 were influenced by the siliceous salts. It suggested that roasting temperature and the amount of alkali act as important factors for the phase transformation of silicon. NaFe(SiO3)2 was formed in the temperature which is best for the production of Na2CrO4, while excess amount of alkali could decompose acmite into NaFeO2 and Na2SiO3. It was observed that a large amount of insoluble NaFe(SiO3)2 took shape during the lime-free roasting when the temperature was above 1273 K (1000 °C). The extracting rate of chromium from chromium-containing slag roasted at 1373 K (1100 °C) was only 29.99 pct and almost no silicon was leached out.

  16. Chromium supplementation improved post-stroke brain infarction and hyperglycemia.

    Science.gov (United States)

    Chen, Wen-Ying; Mao, Frank Chiahung; Liu, Chia-Hsin; Kuan, Yu-Hsiang; Lai, Nai-Wei; Wu, Chih-Cheng; Chen, Chun-Jung

    2016-04-01

    Hyperglycemia is common after acute stroke and is associated with a worse outcome of stroke. Thus, a better understanding of stress hyperglycemia is helpful to the prevention and therapeutic treatment of stroke. Chromium is an essential nutrient required for optimal insulin activity and normal carbohydrate and lipid metabolism. Beyond its nutritional effects, dietary supplement of chromium causes beneficial outcomes against several diseases, in particular diabetes-associated complications. In this study, we investigated whether post-stroke hyperglycemia involved chromium dynamic mobilization in a rat model of permanent focal cerebral ischemia and whether dietary supplement of chromium improved post-stroke injury and alterations. Stroke rats developed brain infarction, hyperglycemia, hyperinsulinemia, glucose intolerance, and insulin resistance. Post-stroke hyperglycemia was accompanied by elevated secretion of counter-regulatory hormones including glucagon, corticosterone, and norepinephrine, decreased insulin signaling in skeletal muscles, and increased hepatic gluconeogenesis. Correlation studies revealed that counter-regulatory hormone secretion showed a positive correlation with chromium loss and blood glucose increased together with chromium loss. Daily chromium supplementation increased tissue chromium levels, attenuated brain infarction, improved hyperglycemia, and decreased plasma levels of glucagon and corticosterone in stroke rats. Our findings suggest that stroke rats show disturbance of tissue chromium homeostasis with a net loss through urinary excretion and chromium mobilization and loss might be an alternative mechanism responsible for post-stroke hyperglycemia. PMID:26477944

  17. Natural and induced reduction of hexavalent chromium in soil

    Science.gov (United States)

    Leita, Liviana; Margon, Alja; Sinicco, Tania; Mondini, Claudio; Valentini, Massimiliano; Cantone, Pierpaolo

    2013-04-01

    Even though naturally elevated levels of chromium can be found naturally in some soils, distressing amounts of the hexavalent form (CrVI) are largely restricted to sites contaminated by anthropogenic activities. In fact, the widespread use of chromium in various industries and the frequently associated inadequate disposal of its by-products and wastes have created serious environmental pollution problems in many parts of the world. CrVI is toxic to plants, animals and humans and exhibits also mutagenic effects. However, being a strong oxidant, CrVI can be readily reduced to the much less harmful trivalent form (CrIII) when suitable electron donors are present in the environment. CrIII is relatively insoluble, less available for biological uptake, and thus definitely less toxic for web-biota. Various electron donors in soil can be involved in CrVI reduction in soil. The efficiency of CrVI reducing abiotic agents such as ferrous iron and sulphur compounds is well documented. Furthermore, CrVI reduction is also known to be significantly enhanced by a wide variety of cell-produced monosaccharides, including glucose. In this study we evaluated the dynamics of hexavalent chromium (CrVI) reduction in contaminated soil amended or not with iron sulphate or/and glucose and assessed the effects of CrVI on native or glucose-induced soil microbial biomass size and activity. CrVI negatively affected both soil microbial activity and the size of the microbial biomass. During the incubation period, the concentration of CrVI in soil decreased over time whether iron sulphate or/and glucose was added or not, but with different reduction rates. Soil therefore displayed a natural attenuation capacity towards chromate reduction. Addition of iron sulphate or/and glucose, however, increased the reduction rate by both abiotic and biotic mechanisms. Our data suggest that glucose is likely to have exerted an indirect role in the increased rate of CrVI reduction by promoting growth of

  18. Natural geochemical risk in the Pollino Massif: a case-study of chromium

    Directory of Open Access Journals (Sweden)

    Priscilla Boccia

    2015-06-01

    In vitro testing In the present study we have analyzed the genotoxic potential of Cr (VI in HepG2 cell line. The results demonstrate that Cr (VI induces significant cytotoxic effect at the higher concentrations (2 and 4 µM and DNA damage at early stages of exposure at concentration of 1 μM in cell line. It is interesting to study the correlation of oxidative stress to the cellular damaging potentials of Cr (VI. We will focus our experimental proposal on the idea that DNA damage can be used as a biomarker of exposure in the domestic population exposed chronically to trivalent chromium as the population of San Severino Lucano. In fact, many studies suggest that exposure to trivalent chromium can lead to DNA damage detectable in human lymphocytes and that the absorption of Cr (III in the exposed population may be slow but effective if the exposure is continued for prolonged periods.

  19. Wet digestion and differential pulse stripping voltammetry determination of total chromium in the millet

    Directory of Open Access Journals (Sweden)

    Yaqin LIU

    2015-06-01

    Full Text Available The chromium content of millet is measured by HNO3-H2O2 digestion and electrochemical method. In the DTPA-HAc-NaAc system, the oxidation peak current of amalgam formed by hexavalent chrome ion is obtained in the plating mercury electrode, and the pre-treatment technology of wet digestion can meet the electrochemical determination. The optimized detection condition of electrochemical method for hexavalent chrome ion is 130 ℃ of digestion solution, 10 mL hydrogen peroxide, 38 mL nitric acid, and neutral of pH. The linear correlation coefficient of electrochemical method is 0.99, and the recovery of standard addition is 90%~110%. This method can be used to trace chromium (Ⅵ determination in millet.

  20. The compatibility of chromium-aluminium steels with high pressure carbon dioxid at intermediate- temperatures

    International Nuclear Information System (INIS)

    With a view to their use in the exchangers of nuclear reactors of the graphite-gas or heavy water-gas types, the behaviour of chromium-aluminium steels containing up to 7 per cent chromium and 1.5 per cent aluminium has been studied in the presence of high-pressure carbon dioxide at temperatures of between 400 and 700 deg. C. The two most interesting grades of steel (2 per cent Cr - 0.35 per cent Al - 0.35 per cent Mo and 7 per cent Cr - 1.5 per cent Al - 0.6 per cent Si) are still compatible with carbon dioxide up to 550 and 600 deg. C respectively. A hot dip aluminised coating considerably increases resistance to oxidation of the first grade and should make possible its use up to temperatures of at least 600 deg. C. (authors)

  1. Influence of chromium salts on increased lipid peroxidation and differential pattern in antioxidant metabolism in Pistia stratiotes L

    Directory of Open Access Journals (Sweden)

    RishiKesh Upadhyay

    2010-10-01

    Full Text Available In this work, the changing effect of different concentrations (0, 0.01, 0.1, 1, 10mM of hexavalent and trivalent chromium on different biochemical parameters along with antioxidant enzymes was investigated on water lettuce (Pistia stratiotes L. in order to know the possible involvement of this metal in oxidative injury, besides the activities of antioxidant enzymes leading to biochemical and oxidative aberration induced by elevated concentrations. Both in roots and shoots, Cr produced a significant increase in enzymic and non-enzymic antioxidants, except in catalase (CAT activity where a strong accumulation of hydrogen peroxide was indicated, suggesting an imposition of oxidative stress. The observation showed an uptake of chromium by P. stratiotes L. as well as increase in activity of antioxidants, as the concentrations and their duration of treatment increased. The activity of antioxidative enzymes determined the steady-state levels of ROS in the cell. The augmentation of antioxidative defense plays a key role in regulating the oxidative stress. This pointed to the possibility in induction of oxidative stress, with the increasing lipid peroxidation, followed by a differential pattern in antioxidant metabolisms by chromium ions in P. stratiotes L.

  2. Production of basic chromium sulfate by using recovered chromium from ashes of thermally treated leather.

    Science.gov (United States)

    Dettmer, Aline; Nunes, Keila Guerra Pacheco; Gutterres, Mariliz; Marcílio, Nilson Romeu

    2010-04-15

    Leather wastes tanned with chromium are generated during the production process of leather, hence the wastes from hand crafted goods and footwear industries are a serious environmental problem. The thermal treatment of leather wastes can be one of the treatment options because the wastes are rich in chromium and can be used as a raw material for sodium chromate production and further to obtain several chromium compounds. The objective of this study was to utilize the chromium from leather wastes via basic chromium sulfate production to be subsequently applied in a hide tanning. The obtained results have shown that this is the first successful attempt to achieve desired base properties of the product. The result was achieved when the following conditions were applied: a molar ratio between sodium sulfite and sodium dichromate equal to 6; reaction time equal to 5 min before addition of sulfuric acid; pH of sodium dichromate solution equal to 2. Summarizing, there is an opportunity to utilize the dangerous wastes and reused them in the production scheme by minimizing or annulling the environmental impact and to attend a sustainable process development concept. PMID:20031309

  3. Inhibition of CO poisoning on Pt catalyst coupled with the reduction of toxic hexavalent chromium in a dual-functional fuel cell

    OpenAIRE

    Dong Young Chung; Hyoung-il Kim; Young-Hoon Chung; Myeong Jae Lee; Sung Jong Yoo; Alok D. Bokare; Wonyong Choi; Yung-Eun Sung

    2014-01-01

    We propose a method to enhance the fuel cell efficiency with the simultaneous removal of toxic heavy metal ions. Carbon monoxide (CO), an intermediate of methanol oxidation that is primarily responsible for Pt catalyst deactivation, can be used as an in-situ reducing agent for hexavalent chromium (Cr (VI)) with reactivating the CO-poisoned Pt catalyst. Using electro-oxidation measurements, the oxidation of adsorbed CO molecules coupled with the concurrent conversion of Cr (VI) to Cr (III) was...

  4. Inelastic Scattering of Neutrons in Chromium

    International Nuclear Information System (INIS)

    The phonon spectrum of chromium has been studied by neutron inelastic scattering. The dispersion curves are very similar, in form to those of tungsten and molybdenum, indicating similar interionic force constants. The neutron groups broaden but do not shift appreciably when the temperature is raised. No effect has been observed which can be attributed to the interaction between the phonons and the crystal magnetization in the antiferromagnetic phase. (author)

  5. Observational Approach to Chromium Site Remediation - 13266

    International Nuclear Information System (INIS)

    Production reactors at the U.S. Department of Energy's (DOE) Hanford Site in Richland, Washington, required massive quantities of water for reactor cooling and material processing. To reduce corrosion and the build-up of scale in pipelines and cooling systems, sodium dichromate was added to the water feedstock. Spills and other releases at the makeup facilities, as well as leaks from miles of pipelines, have led to numerous areas with chromium-contaminated soil and groundwater, threatening fish populations in the nearby Columbia River. Pump-and-treat systems have been installed to remove chromium from the groundwater, but significant contamination remain in the soil column and poses a continuing threat to groundwater and the Columbia River. Washington Closure Hanford, DOE, and regulators are working on a team approach that implements the observational approach, a strategy for effectively dealing with the uncertainties inherent in subsurface conditions. Remediation of large, complex waste sites at a federal facility is a daunting effort. It is particularly difficult to perform the work in an environment of rapid response to changing field and contamination conditions. The observational approach, developed by geotechnical engineers to accommodate the inherent uncertainties in subsurface conditions, is a powerful and appropriate method for site remediation. It offers a structured means of quickly moving into full remediation and responding to the variations and changing conditions inherent in waste site cleanups. A number of significant factors, however, complicate the application of the observational approach for chromium site remediation. Conceptual models of contamination and site conditions are difficult to establish and get consensus on. Mid-stream revisions to the design of large excavations are time-consuming and costly. And regulatory constraints and contract performance incentives can be impediments to the flexible responses required under the observational

  6. Stainless chromium-nickel steels. Chapter I

    International Nuclear Information System (INIS)

    The chemical composition is tabulated of 90 chromium-nickel stainless steels and alloys given in volume %. The values are also given of the corrosion resistance of the steels and alloys. The tables show data on the surface condition or the methods of material working, types and chemical composition of the medium where corrosion resistance tests were carried out, temperature, pressure, time of tests, corrosion rates, corrosion types, and literature references. A total of 35 references is given. (J.B.)

  7. Loading chromium atoms in a magnetic guide

    OpenAIRE

    Greiner, A; Sebastian, J.; Rehme, P.; Aghajani-Talesh, A.; Griesmaier, A.; Pfau, T.

    2007-01-01

    We have realized a magnetic guide for ultracold chromium atoms by continuously loading atoms directly from a Zeeman slower into a horizontal guide. We observe an atomic flux of $2 \\cdot 10^7$ atoms/s and are able to control the mean velocity of the guided atoms between 0 m/s and 3 m/s. We present our experimental results on loading and controlling the mean velocity of the guided atoms and discuss the experimental techniques that are used.

  8. X-616 Chromium Sludge Lagoons pictorial overview, Piketon, Ohio

    International Nuclear Information System (INIS)

    The Portsmouth Gaseous Diffusion Plant uses large quantities of water for process cooling. The X-616 Liquid Effluent Control Facility was placed in operation in December 1976 to treat recirculation cooling water blowdown from the process cooling system. A chromium-based corrosion inhibitor was used in the cooling water system. A chromium sludge was produced in a clarifier to control chromium levels in the water. Chromium sludge produced by this process was stored in two surface impoundments called the X-616 Chromium Sludge Lagoons. The sludge was toxic due to its chromium concentration and therefore required treatment. The sludge was treated, turning it into a sanitary waste, and buried in an Ohio EPA approved landfill. The plant's process cooling water system has changed to a more environmentally acceptable phosphate-based inhibitor. Closure activities at X-616 began in August 1990, with all construction activities completed in June 1991, at a total cost of $8.0 million

  9. Chromium--a material for fusion technology

    International Nuclear Information System (INIS)

    Due to their low neutron-induced radioactivity chromium based materials are considered to be candidates for structure materials in fusion technology. In this paper investigations are presented of unirradiated chromium with a purity of 99.96% (DUCROPUR) and a dispersion strengthened chromium alloy Cr5Fe1Y2O3 (DUCROLLOY). Both materials have been produced in a powder metallurgical route. Mechanical tests of smooth and pre-cracked specimens have been performed in a wide temperature range. Below 280 deg. C the fracture toughness values of DUCROPUR are very low (1/2), above the transition temperature they exceed 500 MPa m1/2. Large plastic deformations have been observed. DUCROLLOY does not indicate such a significant increase of fracture toughness in the tested temperature range. But above 400 deg. C large plastic deformations can be obtained in bending samples, too. The fatigue crack propagation behaviour of DUCROPUR at 300 deg. C is similar to that of a ductile metal

  10. A REVIEW OF BIOSORPTION OF CHROMIUM IONS BY MICROORGANISMS

    OpenAIRE

    Inga Zinicovscaia

    2012-01-01

    Due to its widespread industrial use, chromium has become a serious pollutant in diverse environmental settings. The main source of chromium pollution including the Republic o Moldova is industry. It is a great need to develop new eco-friendly methods of chromium removal. Biosorption of heavy metals is a most promising technology involved in the removal of toxic metals from industrial waste streams and natural waters. This article is an extended abstract of a communication presented at the...

  11. CHROMIUM INDUCED CYTOTOXICITY IN BLACKGRAM (VIGNA MUNGO L.)

    OpenAIRE

    A. Chidambaram ، P. Sundaramoorthy ، A. Murugan ، K. Sankar Ganesh ، L. Baskaran

    2009-01-01

    Chromium is known to be highly toxic to biological systems. This study was designed to determine the mutagenic effects of different concentrations (0, 10, 25, 50, 100 and 200 mg/L) of hexavalent chromium on root tip cells of blackgram (Vigna mungo L. Hepper). The blackgram seeds were equi-spacially arranged in sterilized petriplates lined with filter paper and they were treated with different concentrations of chromium solution. In germination studies, the morphological growth parameters such...

  12. Processes affecting the remediation of chromium-contaminated sites.

    OpenAIRE

    Palmer, C.D.; Wittbrodt, P R

    1991-01-01

    The remediation of chromium-contaminated sites requires knowledge of the processes that control the migration and transformation of chromium. Advection, dispersion, and diffusion are physical processes affecting the rate at which contaminants can migrate in the subsurface. Heterogeneity is an important factor that affects the contribution of each of these mechanisms to the migration of chromium-laden waters. Redox reactions, chemical speciation, adsorption/desorption phenomena, and precipitat...

  13. Analysis of molybdenum, chromium, vanadium and iron by polarographic techniques

    International Nuclear Information System (INIS)

    The application of direct current Tast polarograph, differential pulse polarography and phase-selective alternative current Tast polarography to the problem of determining molybdenum, chromium, vanadium and iron in various supporting electrolytes is reported. The effect of the supporting electrolyte on the wave/peak potential and sensitivity of the metal ion have been examined. The polarographic methods were applied for simultaneous determination of chromium (3)/chromium (6), vanadium (4), vanadium (5) and iron (2)/iron (3) in different supporting electrolytes

  14. Production of a chromium Bose-Einstein condensate

    OpenAIRE

    Griesmaier, Axel; Stuhler, Jürgen; Pfau, Tilman

    2005-01-01

    The recent achievement of Bose-Einstein condensation of chromium atoms [1] has opened longed-for experimental access to a degenerate quantum gas with long-range and anisotropic interaction. Due to the large magnetic moment of chromium atoms of 6 {$\\mu$}B, in contrast to other Bose- Einstein condensates (BECs), magnetic dipole-dipole interaction plays an important role in a chromium BEC. Many new physical properties of degenerate gases arising from these magnetic forces have been predicted in ...

  15. Removal of chromium(VI) from saline wastewaters by

    OpenAIRE

    AKSU, Zümriye

    2002-01-01

    Some industrial wastewaters contain higher quantities of salts besides chromium(VI) ions so the effect of these salts on the biosorption of chromium(VI) should be investigated. The biosorption of chromium (VI) from saline solutions on two strains of living Dunaliella algae were tested under laboratory conditions as a function of pH, initial metal ion and salt (NaCl) concentrations in a batch system. The biosorption capacity of both Dunaliella strains strongly de...

  16. Increase of chromium utilization in stainless steel melting

    International Nuclear Information System (INIS)

    The processes of deoxidizing when melting stainless 18-10 steels in electric are furnaces by the method of remelting with wastes are investigated. The dependences of amount of reduced chromium on silicon consumption are made more precise. It is shown that it is useful to apply aluminium for deoxidation of acid high-chromium slags. Based on the data on pilot melts the extent to which aluminium can be used as a reducing agent for chromium is estimated. 3 refs., 2 figs

  17. Scientific Opinion on ChromoPrecise® cellular bound chromium yeast added for nutritional purposes as a source of chromium in food supplements and the bioavailability of chromium from this source

    OpenAIRE

    EFSA Panel on Food Additives and Nutrient Sources added to Food (ANS)

    2012-01-01

    The Panel on Food Additives and Nutrient Sources added to Food (ANS) provides a scientific opinion re-evaluating the safety of ChromoPrecise® cellular bound chromium yeast added for nutritional purposes as a source of chromium in food supplements and the bioavailability of chromium from this source. ChromoPrecise® is a yeast preparation with an enriched trivalent chromium content, obtained by culture of Saccharomyces cerevisiae in the presence of chromium chloride. A daily intake of 100 µg ch...

  18. Bonding evolution with sintering temperature in low alloyed steels with chromium

    Directory of Open Access Journals (Sweden)

    Fuentes-Pacheco L.

    2009-01-01

    Full Text Available At present, high performance PM steels for automotive applications follow a processing route that comprises die compaction of water-atomized powder, followed by sintering and secondary treatments, and finishing operations. This study examines Cr-alloyed sintered steels with two level of alloying. In chromium-alloyed steels, the surface oxide on the powder is of critical importance for developing the bonding between the particles during sintering. Reduction of this oxide depends mainly on three factors: temperature, dew point of the atmosphere, and carbothermic reduction provided by the added graphite. The transformation of the initial surface oxide evolves sequence as temperature increases during sintering, depending on the oxide composition. Carbothermic reduction is supposed to be the controlling mechanism, even when sintering in hydrogen-containing atmospheres. The effect of carbothermic reduction can be monitored by investigating the behavior of the specimens under tensile testing, and studying the resultant fracture surfaces.

  19. Chromium depletion from stainless steels during vacuum annealing

    International Nuclear Information System (INIS)

    The behaviour of chromium during selective evaporation by high temperature vacuum annealing has been investigated by means of energy dispersive X-ray analysis and by neutron activation analysis. It was established that the rate of chromium loss from austenitic stainless steels 316 and 321 is controlled by chromium inter-diffusion rather than tracer diffusion in the alloy. Two important parameters in selective removal of chromium from alloy steels are the variation in the chromium surface concentration with time and the depletion profile in the alloy. The present work gives support for the model in which loss of chromium is dependent on its diffusivity in the alloy and on an interface transfer coefficient. The results showed that the surface concentration of chromium decreased with increasing vacuum annealing time. The chromium depletion profile in the metal was in accord with the previous derived model, apart from an anomalous near surface region. Here the higher resolution of a neutron activation technique indicated a region within approximately 2 microns of the surface where the chromium concentration decreased more steeply than expected. (author)

  20. Method of trivalent chromium concentration determination by atomic spectrometry

    Science.gov (United States)

    Reheulishvili, Aleksandre N.; Tsibakhashvili, Neli Ya.

    2006-12-12

    A method is disclosed for determining the concentration of trivalent chromium Cr(III) in a sample. The addition of perchloric acid has been found to increase the atomic chromium spectrometric signal due to Cr(III), while leaving the signal due to hexavalent chromium Cr(VI) unchanged. This enables determination of the Cr(III) concentration without pre-concentration or pre-separation from chromium of other valences. The Cr(III) concentration may be measured using atomic absorption spectrometry, atomic emission spectrometry or atomic fluorescence spectrometry.

  1. Tribological Characteristics of Chromium-active Carbon Electroplated Composite Coatings

    Institute of Scientific and Technical Information of China (English)

    GUKa-fi; HUAMeng; Yi-min

    2004-01-01

    A process of chromium electroplating using a standard bath with additives and active carbon particles was reported, and the tribological behaviors of the composite coatings using the pin-on-disk tester and the table wear tester were i nvestig(aed. Experimental results indicate that the electroplated chromium-active carbon composite coatings exhibited the low friction coefficient anti excellent anti-wear properties whets coffered with the normal chromium electroplated ones. The formation of active carbon particles within the chromium matrices can be explained by SEM analysis and the mechanis of wear resistance of the composite coatings were studied.

  2. Defect transformation in GSGG crystals during chromium ion activation

    International Nuclear Information System (INIS)

    Absorption and induced absorption spectra, dose dependence of induced absorption, thermoluminescence of GSGG crystals, nominally pure and activated with chromium and neodymium ions in different concentrations, are investigated. It is shown that it is chromium ion presence in large concentration that decreases the induced coloration in GSGG crystals after γ-irradiation at 300 K. Optimum concentration of chromium ions for the minimum of induced coloration are found. The mechanism of decrease of induced coloration consisting in Fermi level displacement by chromium ion activation is established. Defect concentration and localization and recombination possibilities of electrons and holes in GSGG crystals are estimated by computer simulation

  3. Oral bioavailability of chromium from a specific site.

    OpenAIRE

    Witmer, C M; Harris, R.; Shupack, S I

    1991-01-01

    Analysis of soil from a specific site in New Jersey indicated a low level of sodium and chromium present as a calcium compound. Chromium was then administered orally to young, mature male rats at a level of 240 micrograms/kg for 14 days as chromium-contaminated soil, as CaCrO4, and as an equimolar mixture of the soil and calcium salts for 14 days. The rats were sacrificed 24 hr after the last dosing, and tissues were taken immediately for chromium analysis. Blood, muscle, and liver contained ...

  4. MICRO-SEGREGATION OF CHROMIUM IN Fe-Cr ALLOY

    OpenAIRE

    Igata, N.; Sato, S; ANDO, T.; H. Doi; Nishikawa, O.; Shibata, M.

    1984-01-01

    The objective of this investigation is to clarify the behavior of chromium atoms in iron-5at.% chromium alloy. When the specimens were quenched after soultion annealing at 1150°C for 1hr, FIM image was only a bright area, but when they were tempered from 450°C to 650°C, both bright areas and dark areas were observed in the FIM image. In these quenched specimens there was microsegregation of chromium atoms : In bright areas the chromium concentration was lower, and in dark areas it was higher ...

  5. Influence of Chelating Agents on Chromium Fate in Sediment

    Institute of Scientific and Technical Information of China (English)

    WANGXIAOCHANG; SUNJINHE; 等

    1996-01-01

    A laboratory investigation on reaction between chelating agents and chromium was conducted to evaluate the effect of chelating agents on the adsorption and desorption of chromium in sediment.The amount of adsorbed chromium(VI) in sediment decreased slightly by 5%-10% because of addition of chelating agents.Chelating agents inhibited the removal of Cr(Ⅲ)by sediment from solutions and the inhibiting effect was in the order:citric acid>tartaric acid>EDTA,Salicylic acid.No effect of chelating agents on desorption of chromium in sediment was observed.

  6. Role of L-Histidine in Preventing the Toxicological effects Induced by Chromium or Nickel Metals in Male Rats

    International Nuclear Information System (INIS)

    -histidine treatment returned these values near to control value. Spleen of rats treated by chromium revealed lymphatic necrosis while nickel group revealed a presence of megakaryocytes. L-Histidine treatment lowered the effect of these metals in spleen. Iron and Cu were increased significantly in chromium and nickel groups while Zn was decreased significantly in chromium and increased non-significantly in nickel group. These effects are due to ability to replace other metal ions in enzymes. Feeding on L-histidine increased the concentration of Zn and decreased Cu levels while L-histidine has a less effect on Fe especially in chromium treated group. For kidney function, urea and creatinine were increased significantly in chromium and nickel groups while creatinine clearance was decreased indicating low glomerular function. After treatment by L-histidine, urea and creatinine levels became lower which reduced the renal damage. Albumin, total protein and globulin were decreased significantly in Cr and Ni groups. L-Histidine ameliorates these effects especially in nickel group. Triiodothyronine and thyroxine were decreased significantly in chromium and nickel groups while T4 was increased in nickel group. These effects led to thyroid related problems while L-histidine feeding regulates thyroid hormones secretion. The levels of thiobarbituric acid-reactive substances (TBARS) were increased while levels of the total antioxidant capacity were decreased. These findings may be due to chromium hexavalent (VI) and nickel chloride induce oxidative stress, increased production of reactive oxygen species (ROS), lipid peroxidation and changes in antioxidant enzymes activities. L-Histidine feeding decreased lipid peroxidation and increased antioxidant capacity. It could be concluded that L-histidine increased the haematopiotic system, decreased impairing the metabolism of protein and also regulates thyroid status. The amino acid histidine have various mechanisms which may serve for realization of

  7. Development of polymeric and polymer-based hybrid adsorbents for chromium removal from aqueous solution

    Energy Technology Data Exchange (ETDEWEB)

    Kaya, Ismet Gul Buyruklardan; Duranoglu, Dilek; Beker, Ulker [Chemical Engineering Department, Yildiz Technical, Esenler, Istanbul (Turkey); Senkal, Bahire Filiz [Department of Chemistry, Istanbul Technical University, Maslak, Istanbul (Turkey)

    2011-11-15

    Ferric oxide-loaded hybrid sorbents are environmentally benign and exhibit sorption behaviors for chromium removal from waters. In the current study, glycidyl methacrylate-based polymer (GMD) and nanosized ferric oxide loaded glycidyl methacrylate-based polymer (GMDFe) were prepared and assayed to examine the effect of ferric oxide loading on chromium sorption from aqueous solution for the first time from the equilibrium and kinetic points of view. The experimental equilibrium data, suitably fitted by the Langmuir and Freundlich isotherms, have shown that ferric oxide loaded hybrid sorbent exhibits higher adsorption capacity than glycidyl methacrylate-based polymer (GMD). The Langmuir isotherm model was found to be the most suitable one for the Cr(VI) adsorption. The maximum adsorption capacities of GMD and GMDFe sorbents were determined at pH 4 as 109.54 and 157.52 mg/g, respectively. A series of column experiments was carried out to determine the breakthrough curves. The column was regenerated by eluting Cr(VI) using NaOH (10% w/v) solution after adsorption studies. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  8. Studies on the process aspects related to chemical decontamination of chromium-containing alloys with redox processes

    International Nuclear Information System (INIS)

    Presence of chromium in the oxide layer makes oxidative pre-treatment with oxidizing agents such as potassium permanganate (KMnO4) a must for the decontamination of stainless steels and other chromium containing alloys. The effectiveness of pre-treatment with oxidizing reagent varies with the conditions of treatment such as temperature, concentration and whether the medium is acidic or alkaline. A comparative study of the two acidic oxidizing agents, i.e., nitric acid-permanganate and permanganic acid was made. The dissolution behavior of copper and its oxide in permanganic acid was found to be comparable to that of chromium oxide. Citric acid and ascorbic acid were investigated as alternatives to oxalic acid for the reduction/decomposition of permanganate left over after the oxidizing pre-treatment step. It has been established that the reduction of chromate by citric acid is instantaneous only in presence of Mn2+ ions. It has also been established that reduction of residual permanganate can be achieved with ascorbic acid and with minimum chemical requirement. The capabilities of nitrilotriacetic acid (NTA)-ascorbic acid mixture for the dissolution of hematite have been explored. This study would help to choose the suitable oxidizing agent, the reducing agent used for decomposition of permanganate and to optimize the concentration of reducing formulation so that the process of decontamination is achieved with a minimum requirement of chemicals. The generation of radioactive ion exchange resin as waste is therefore held at a minimum. Ion exchange studies with metal ion complexes of relevance to decontamination were carried out with a view to choose a suitable type of ion exchanger. It has been established that treatment of the ion exchange resin with brine solution can solve the problem of leaching out of non-ionic organics from the resin. (orig.)

  9. The effect of chromium picolinate on serum cholesterol and apolipoprotein fractions in human subjects.

    OpenAIRE

    Press, R. I.; Geller, J.; Evans, G. W.

    1990-01-01

    Chromium has been implicated as a cofactor in the maintenance of normal lipid and carbohydrate metabolism. A deficiency of chromium results from diets low in biologically available chromium. Picolinic acid, a metabolite of tryptophan, forms stable complexes with transitional metal ions, which results in an improved bioavailability of the metal ion chromium. To determine whether or not chromium picolinate is effective in humans, 28 volunteer subjects were given either chromium tripicolinate (3...

  10. Effects of (n, γ) reaction on chromium oxides (VI)

    International Nuclear Information System (INIS)

    A study of the behaviour of the recoil atom in irradiated CrO3 has been performed. Irradiations were made in a nuclear reactor; post-irradiation analysis was performed using low voltage paper electrophoresis; an isothermal step annealing study was also conducted. Obtained values for rate constants and the activation energy for the annealing reaction are presented. A comparison with the behaviour reported for different chromates was performed. (Author)

  11. Chromium oxide catalysts in the dehydrogenation of alkanes

    OpenAIRE

    Airaksinen, Sanna

    2005-01-01

    Light alkenes, such as propene and butenes, are important intermediates in the manufacture of fuel components and chemicals. The direct catalytic dehydrogenation of the corresponding alkanes is a selective way to produce these alkenes and is frequently carried out using chromia/alumina catalysts. The aim of this work was to obtain structure–activity information, which could be utilised in the optimisation of this catalytic system. The properties of chromia/alumina catalysts were investigated ...

  12. Tailoring ferromagnetism in chromium-doped zinc oxide

    International Nuclear Information System (INIS)

    The simultaneous manipulation of both charge and spin has made diluted magnetic semiconductors (DMS) a potential material for the fabrication of spintronic devices. We report DMSs based on ZnO doped with Cr in wurtzite (WZ) and zinc-blend (ZB) geometries. The injection of Cr impurities at a concentration of 6.25% has successfully tuned ferromagnetism in ZnO. To recognize the nature of magnetic interactions, two spatial configurations are investigated, where the impurity atoms are placed at minimum and maximum separation distances. The material favors the short-range magnetic coupling and has a tendency towards Cr clustering. The injection of a Cr impurity into ZnO strongly influences the electronic properties in terms of band structure, dependent on the impurity spatial distribution. It is half metallic for both structural geometries when impurity atoms have minimum separation and is metallic when they are placed far apart. Moreover, replacing Zn with Cr does not show a significant effect on the structural geometries. Our results endorse that Cr:ZnO can be efficiently used for spin-polarized transport and other spin-dependent applications in both hexagonal and cubic phases. (papers)

  13. Stabilization/solidification on chromium (III) wastes by C(3)A and C(3)A hydrated matrix.

    Science.gov (United States)

    Li, Xiangguo; He, Chao; Bai, Yun; Ma, Baoguo; Wang, Guandong; Tan, Hongbo

    2014-03-15

    Hazardous wastes are usually used in the Portland cement production in order to save energy, costs and/or stabilize toxic substances and heavy metals inside the clinker. This work focus on the stabilization/solidification on chromium (III) wastes by C(3)A and C(3)A hydrated matrix. The immobilization rate of chromium in C(3)A and the leaching characteristics of the C(3)A hydrated matrixes containing chromium were investigated by ICP-AES. The results indicated that C(3)A had a good solidifying effect on chromium using the clinkering process, however, the Cr leaching content of Cr-doped C(3)A was higher than that of hydrated C(3)A matrix in Cr(NO(3))3 solution and was lower than that of the hydrated C(3)A matrix in K(2)CrO(4) solution, no matter the leachant was sulphuric acid & nitric acid or water. To explain this, C(3)A formation, chemical valence states of chromium in C(3)A, hydration products and Cr distribution in the C(3)A-gypsum hydrated matrixes were studied by XRD, XPS and FESEM-EDS. The investigation showed that part of Cr(3+) was oxidized to Cr(6+) in the clinkering process and identified as the chromium compounds Ca(4)Al(6)O(12)CrO(4) (3CaO·Al(20O(3)·CaCrO(4)), which resulted in the higher leaching of hydrated matrix of Cr-doped C(3)A. PMID:24468527

  14. Photoelectrochemical water splitting on chromium-doped titanium dioxide nanotube photoanodes prepared by single-step anodizing

    International Nuclear Information System (INIS)

    Graphical abstract: Current–potential curves with chopped light measured in 1 M NaOH with a scan rate of 5 mV s−1 for the different samples. - Highlights: • Cr-doped TiO2 nanotube layers (Cr–TiO2NTs) were synthesized by anodizing of titanium in a single-step process. • Photoelectrochemical water splitting of Cr–TiO2NTs is higher than that of pure TiO2 nanotubes (TiO2NTs). • Quantity effect of chromium in these composite for photoelectrochemical water splitting is investigated. • Maximum hydrogen production of 37 μL/cm2 after 240 min is obtained. - Abstract: Cr-doped TiO2 nanotubes (Cr–TiO2NTs) with different amounts of chromium were obtained directly by the electrochemical anodic oxidation of titanium foils in a single-step process using potassium chromate as the chromium source. The effects of chromium amount in anodizing solution on the morphologies, structure, photoabsorption and photoelectrochemical water splitting of the TiO2 nanotube array film were investigated. Diffuse reflectance spectra showed an increase in the visible absorption relative to undoped TiO2NTs. The photoelectrochemical performance was examined under visible irradiation in 1 M NaOH electrolyte. Photo-electrochemical characterization shows that chromium doping efficiently enhances the photo-catalytic water splitting performance of Cr-doped TiO2 nanotube samples. The sample (Cr–TiO2NTs-1) exhibited better photo-catalytic activity than the undoped TiO2NTs and Cr–TiO2NTs fabricated using other chromium concentrations. This can be attributed to the effective separation of photogenerated electron–hole upon the substitutional introduction of appropriate Cr amount in to the TiO2 nanotube structure

  15. Photoelectrochemical water splitting on chromium-doped titanium dioxide nanotube photoanodes prepared by single-step anodizing

    Energy Technology Data Exchange (ETDEWEB)

    Momeni, Mohamad Mohsen, E-mail: mm.momeni@cc.iut.ac.ir; Ghayeb, Yousef

    2015-07-15

    Graphical abstract: Current–potential curves with chopped light measured in 1 M NaOH with a scan rate of 5 mV s{sup −1} for the different samples. - Highlights: • Cr-doped TiO{sub 2} nanotube layers (Cr–TiO{sub 2}NTs) were synthesized by anodizing of titanium in a single-step process. • Photoelectrochemical water splitting of Cr–TiO{sub 2}NTs is higher than that of pure TiO{sub 2} nanotubes (TiO{sub 2}NTs). • Quantity effect of chromium in these composite for photoelectrochemical water splitting is investigated. • Maximum hydrogen production of 37 μL/cm{sup 2} after 240 min is obtained. - Abstract: Cr-doped TiO{sub 2} nanotubes (Cr–TiO{sub 2}NTs) with different amounts of chromium were obtained directly by the electrochemical anodic oxidation of titanium foils in a single-step process using potassium chromate as the chromium source. The effects of chromium amount in anodizing solution on the morphologies, structure, photoabsorption and photoelectrochemical water splitting of the TiO{sub 2} nanotube array film were investigated. Diffuse reflectance spectra showed an increase in the visible absorption relative to undoped TiO{sub 2}NTs. The photoelectrochemical performance was examined under visible irradiation in 1 M NaOH electrolyte. Photo-electrochemical characterization shows that chromium doping efficiently enhances the photo-catalytic water splitting performance of Cr-doped TiO{sub 2} nanotube samples. The sample (Cr–TiO{sub 2}NTs-1) exhibited better photo-catalytic activity than the undoped TiO{sub 2}NTs and Cr–TiO{sub 2}NTs fabricated using other chromium concentrations. This can be attributed to the effective separation of photogenerated electron–hole upon the substitutional introduction of appropriate Cr amount in to the TiO{sub 2} nanotube structure.

  16. The Effect of Chromium Added into Basal Diet on Serum Total Protein, Urea, Triglyceride, Cholesterol and Serum and Tissue Chromium, Zinc, Copper Levels in Rabbits

    OpenAIRE

    *, Kâzim ŞAHİN; *, Talat GÜLER; +, N. ŞAHİN; *, O. N. ERTAS; +, N. ERKAL

    1999-01-01

    This study was conducted to determine the effect of supplemantal dietary chromium on serum total protein, urea, triglycerides, cholesterol, and serum and tissue chromium, zinc, and copper contents of pregnant rabbits, their offspring and their young rabbits. Treatment groups consisted of chromium level as follows: Control Group no supplementation chromium into basal diet, Treatment I (200 ppb Group) contained 200 ppb of supplemental chromium into basal diet, and Treatment II (400 ppb Group...

  17. High gas velocity oxidation and hot corrosion testing of oxide dispersion-strengthened nickel-base alloys

    Science.gov (United States)

    Deadmore, D. L.; Lowell, C. E.

    1975-01-01

    Several oxide dispersion strengthened (ODS) nickel-base alloys were tested in high velocity gases for cyclic oxidation resistance at temperatures to 1200 C and times to 500 hours and for hot corrosion resistance at 900 C for 200 hours. Nickel-chromium-aluminum ODS alloys were found to have superior resistance to oxidation and hot corrosion when compared to bare and coated nickel-chromium ODS alloys. The best of the alloys tested had compositions of nickel - 15.5 to 16 weight percent chromium with aluminum weight percents between 4.5 and 5.0. All of the nickel-chromium-aluminum ODS materials experienced small weight losses (less than 16 mg/sq cm).

  18. Solid state reduction of chromium (VI) pollution for Al2O3-Cr metal ceramics application

    Science.gov (United States)

    Zhu, Hekai; Fang, Minghao; Huang, Zhaohui; Liu, Yangai; Tang, Hao; Min, Xin; Wu, Xiaowen

    2016-04-01

    Reduction of chromium (VI) from Na2CrO4 through aluminothermic reaction and fabrication of metal-ceramic materials from the reduction products have been investigated in this study. Na2CrO4 could be successfully reduced into micrometer-sized Cr particles in a flowing Ar atmosphere in presence of Al powder. The conversion ratio of Na2CrO4 to metallic Cr attained 96.16% efficiency. Al2O3-Cr metal-ceramic with different Cr content (5 wt%, 10 wt%, 15 wt%, 20 wt%) were further prepared from the reduction product Al2O3-Cr composite powder, and aluminum oxide nanopowder via pressure-less sintering. The phase composition, microstructure and mechanical properties of metal-ceramic composites were characterized to ensure the potential of the Al2O3-Cr composite powder to form ceramic materials. The highest relative density and bending strength can reach 93.4% and 205 MP, respectively. The results indicated that aluminothermic reduction of chromium (VI) for metal-ceramics application is a potential approach to remove chromium (VI) pollutant from the environment.

  19. A Study of Chromium Adsorption on Natural Goethite Biomineralized with Iron Bacteria

    Institute of Scientific and Technical Information of China (English)

    SUN Zhenya; ZHU Chunshui; HUANG Jiangbo; GONG Wenqi; CHEN Hesheng; MU Shanbin

    2006-01-01

    Goethite, especially biogenic goethite, has high specific surface area and great capacity for the adsorption of many contaminants including metal ions and organic chelates. Chromium is a redox actively toxic metal ion that exists as either CrⅢ or CrⅥ in nature, and as such it is essential to understand its behavior of adsorption on natural goethite mineralized by iron bacteria, as Gallionella and Leptothrix in water body. The adsorption of Cr3+ and CrⅥ on naturally biomineralized goethite is studied in this paper. The results show that both Langmuir and Freundlich adsorption isothermal models are able to accurately describe the adsorption of these two ions. Investigation of SEM/EDS,TEM/EDS indicates that the two ions do not adsorb homogeneously on goethite owing to the different microstructures of goethite, and that the microspherical goethite has a greater adsorption capacity for chromium ions than the helical one. XPS data show that redox reaction of chromium on the surface of biomineralized goethite takes place in the adsorption of both Cr3+ and CrⅥ. The CrⅥ adsorbed on biogoethite is much easier to transform into CrⅢ than the oxidization of CrⅢ on the bio-goethite.

  20. Towards zero discharge of chromium-containing leather waste through improved alkali hydrolysis.

    Science.gov (United States)

    Mu, Changdao; Lin, Wei; Zhang, Mingrang; Zhu, Qingshi

    2003-01-01

    The treatment of chromium-containing leather waste (CCLW), the major solid waste generated at the post-tanning operations of leather processing, has the potential to generate value-added leather chemicals. Various alkali and enzymatic hydrolysis were compared, and calcium oxide was found to be important for effective (but still incomplete) hydrolysis. Three possible reasons are given for the incomplete hydrolysis under alkaline conditions. Data for 19 amino acids are presented for four different treatment products. On the basis of the results, a novel three-step CCLW treatment process is proposed. The gelatin extracted in the first step is chemically modified to produce leather finishing agents. The collagen hydrolysates isolated in the second step are used as proteinic retanning agents by chemical modification. The remaining chrome cake is further hydrolyzed with acids in the third step, and the obtained chromium-containing protein hydrolysates could be used for the preparation of chromium-containing retanning agents for leather industry. The proposed three-step process provides a feasible zero discharge process for the treatment of CCLW. PMID:14583246

  1. Assessment of the removal mechanism of hexavalent chromium from aqueous solutions by olive stone.

    Science.gov (United States)

    Martín-Lara, María Ángeles; Calero de Hoces, Mónica; Ronda Gálvez, Alicia; Pérez Muñoz, Antonio; Trujillo Miranda, Ma Carmen

    2016-01-01

    The objectives of this study were to study the removal mechanism of Cr(VI) by natural olive stone (OS) and to present a sequential-batch process for the removal of total chromium (original Cr(VI) and Cr(III) derived from reduction of Cr(VI) during biosorption at acidic conditions). First, experiments were conducted varying pH from 1 to 4, and showed that a combined effect of biosorption and reduction is involved in the Cr(VI) removal. Then, X-ray photoelectron spectroscopy and desorption tests were employed to verify the oxidation state of the chromium bound to OS and to elucidate the removal mechanism of Cr(VI) by this material. The goal of these tests was to confirm that Cr(III) is the species mainly absorbed by OS. Finally, the possibility of total chromium removal by biosorption in a sequential-batch process was analyzed. In the first stage, 96.38% of Cr(VI) is removed by OS and reduced to Cr(III). In the second stage, approximately 31% of the total Cr concentration was removed. However, the Cr(III) released in the first stage is not completely removed, and it could suggest that the Cr(III) could be in a hydrated compound or a complex, which could be more difficult to remove under these conditions. PMID:27232404

  2. Determination of iron, nickel, and chromium in the Masurca simulation rods

    International Nuclear Information System (INIS)

    A method has been developed for determining the iron, nickel and chromium content of sintered ternary oxide rods designed to simulate structural elements in the reactor Masurca. During this work a calculation was made of the conditional constant of the Fe-EDTA complex in a formic buffer solution, and of that, of the Ni-EDTA complex in an ammoniacal buffer. From these two values it appears that it is not possible to carry out the iron and nickel determinations with a standard EDTA solution when these two elements are present simultaneously. That is the reason for which, in this case, a separation of the Fe and Ni is carried out in 8 N HCl solution on an anion exchange resin. Each element is then dosed by titricolorimetry. Chromium is determined by the same technique without prior separation. The reproducibility of the method has been calculated for each of the three elements. The relative accuracy is: 0.58 per cent for the iron; 1.41 per cent for the nickel; 0.39 per cent for the chromium. (authors)

  3. Cycling Performance of the Iron-Chromium Redox Energy Storage System

    Science.gov (United States)

    Gahn, R. F.; Hagedorn, N. H.; Johnson, J. A.

    1985-01-01

    Extended charge-discharge cycling of this electrochemical storage system at 65 C was performed on 14.5 sq cm single cells and a four cell, 867 sq cm bipolar stack. Both the anolyte and catholyte reactant fluids contained 1 molar concentrations of iron and chromium chlorides in hydrochloric acid and were separated by a low-selectivity, cation-exchange membrane. The effect of cycling on the chromium electrode and the cation-exchange membrane was determined. Bismuth and bismuth-lead catalyzed chromium electrodes and a radiation-grafted polyethylene membrane were evaluated by cycling between 5 and 85 percent state-of-charge at 80 mA/sq cm and by periodic charge-discharge polarization measurements to 140 mA/sq cm. Gradual performance losses were observed during cycling but were recoverable by completely discharging the system. Good scale-up to the 867 sq cm stack was achieved. The only difference appeared to be an unexplained resistive-type loss which resulted in a 75 percent W-hr efficiency (at 80 mA/sq cm versus 81 percent for the 14.5 sq cm cell). A new rebalance cell was developed to maintain reactant ionic balance. The cell successfully reduced ferric ions in the iron reactant stream to ferrous ions while chloride ions were oxidized to chlorine gas.

  4. STABILITY AND ABSORPTION OF CHROMIUM AND ABSORPTION OF CHROMIUM HISTIDINE BY HUMANS

    Science.gov (United States)

    Increased intake of chromium has been shown to lead to improvements in glucose, insulin, lipids, and related variables in studies involving humans, experimental and farm animals. However, the results are often variable depending not only upon the selection of subjects, but also dietary conditions a...

  5. Decrease in electrical resistance of surface oxide of iron-chromium-aluminium alloy by La0.6Sr0.4Co0.2Fe0.8O3 coating and heat treatment for the application of metal-supported solid oxide fuel cells

    Science.gov (United States)

    Pham, Hung-Cuong; Taniguchi, Shunsuke; Inoue, Yuko; Chou, Jyh-Tyng; Izumi, Toru; Matsuoka, Koji; Sasaki, Kazunari

    2015-11-01

    We have investigated the property of a Fe-Cr-Al-type stainless steel as a porous alloy substrate for metal-supported solid oxide fuel cells (SOFCs) especially on the cathode side. We found that the microstructure and electrical resistance of the surface oxide layer of the alloy changes depending on the heat-treatment conditions. A relatively low electrical resistance was obtained when the porous alloy substrate was coated with La0.6Sr0.4Co0.2Fe0.8O3 (LSCF) and heat treated at 700-800 °C in air. The morphology of the surface oxide layer observed by high-resolution transmission electron microscopy was a columnar structure of γ-Al2O3 polycrystal and Sr3Al2O6 growing outward in the same direction. In contrast, the surface oxide layer of the alloy showed a high electrical resistance when the uncoated porous alloy substrate was heat treated. The morphology of the surface oxide layer in that case was a columnar structure consisting of only γ-Al2O3 growing outward in various directions.

  6. Chromium and Polyphenols From Cinnamon Improve Insulin Sensitivity

    Science.gov (United States)

    Naturally occurring compounds that have been shown to improve insulin sensitivity include chromium and polyphenols found in cinnamon. These compounds also have similar effects on insulin signaling and glucose control. The signs of chromium deficiency are similar to those for the metabolic syndrome ...

  7. IRIS Toxicological Review of Hexavalent Chromium (2010 External Review Draft)

    Science.gov (United States)

    [UPDATE] New Schedule for IRIS Hexavalent Chromium Assessment In Feb 2012, EPA developed a new schedule for completing the IRIS hexavalent chromium assessment. Based on the recommendations of the external peer review panel, which met in May 2011 to review the dra...

  8. Composition and structure of plasma sprayed chromium steel powders

    Czech Academy of Sciences Publication Activity Database

    Schneeweiss, O.; Voleník, Karel; Kolman, Blahoslav Jan

    Praha, 2005, s. 105-111. ISBN 1899072 18 7. [EURO Powder Metallurgy Congress & Exhibition. Prague (CZ), 02.10.2005-05.10.2005] Institutional research plan: CEZ:AV0Z20430508 Keywords : chromium steel * plasma spraying * chromium depletion * Mössbauer spectroscopy Subject RIV: JH - Ceramics, Fire-Resistant Materials and Glass

  9. Safety, absorption, and antioxidant effects of chromium histidine

    Science.gov (United States)

    Supplemental chromium has been shown to be involved in the alleviation of the metabolic syndrome, glucose intolerance, polycystic ovary syndrome, depression, excess body fat, and gestational, steroid-induced, and type 2 diabetes. Chromium amino acid complexes that contained histidine displayed cons...

  10. Toxicity and adaptation of Dictyosphaerium chlorelloides to extreme chromium contamination.

    Science.gov (United States)

    Sánchez-Fortún, Sebastián; López-Rodas, Victoria; Navarro, Macarena; Marvá, Fernando; D'ors, Ana; Rouco, Mónica; Haigh-Florez, David; Costas, Eduardo

    2009-09-01

    Metals are often spilled by industries into inland water environments, with adverse consequences. Numerous papers have reported that heavy metals produce massive destruction of algae. Nevertheless, algal populations seem to become tolerant when they have had previous exposures to heavy metals. Because the mechanisms allowing heavy metal tolerance of algae are not yet known, the present study analyzed the effect of hexavalent chromium on growth and photosynthetic performance of Dictyosphaerium chlorelloides, stressing on the adaptation mechanisms to chromium contamination. Growth and photosynthetic performance of algal cells were inhibited by Cr(VI) at 10 mg/L, and the 72-h median inhibition concentration was established as 1.64 and 1.54 mg/L, respectively. However, after further incubation for a three month period in an environment with 25 mg/L of chromium, some rare, chromium-resistant cells occasionally were found. A Luria-Delbrück fluctuation analysis was performed to distinguish between resistant algae arising from rare, spontaneous mutations and resistant algae arising from physiological adaptation and other adaptive mechanisms. Resistant cells arose only by spontaneous mutations before the addition of chromium, with a rate of 1.77 x 10(-6) mutants per cell division. From a practical point of view, the use of both chromium-sensitive and chromium-resistant genotypes could make possible a specific algal biosensor for chromium. PMID:19323601

  11. Residual Chromium in Leather by Instrumental Neutron Activation Analysis

    Directory of Open Access Journals (Sweden)

    S. Okoh

    2012-01-01

    Full Text Available Problem statement: Most tanning processes employ the use of chromium sulphate. For chromium tanned leather, finished products may contain high amount of residual chromium. This may pose some health hazards, since chromium is known to be toxic at elevated concentration. This justifies the need for the study. Approach: Various samples of leather were collected from a tannery, a leather crafts market, a leather dump site and from local tanners all in Kano, Nigeria in 2009. The samples were irradiated for 6 h in the inner site of the Nigerian Research Reactor (NIRR-1 at a flux of 5×1011 ncm-2 sec-1. Results: After evaluating the spectrum, the mean results for chromium in the samples were determined as 2.33±0.3, 2.23±0.3 and 2.93±0.4% for samples from the tannery, leather crafts market and leather dump sites respectively. Chromium concentration in samples collected from local tanners who use tannins from Acacia nilotica as tanning agent was below the detection limit of Instrumental Neutron Activation Analysis (INAA technique used in the study. Conclusion: Although, the concentrations of chromium in the analysed samples were not much higher than what were obtained in literature, they may be enough to sensitize the population that is allergic to chromium.

  12. AMORPHOUS ALLOY SURFACE COATINGS FOR HARD CHROMIUM REPLACEMENT - PHASE I

    Science.gov (United States)

    Hard chromium coatings (0.25 to10 mil thick) are used extensively for imparting wear and erosion resistance to components in both industrial and military applications. The most common means of depositing hard chromium has been through the use of chromic acid baths containing ...

  13. ADVANCES IN HEXAVALENT CHROMIUM REMOVAL AT HANFORD

    Energy Technology Data Exchange (ETDEWEB)

    NESHEM DO; RIDDELLE J

    2012-01-30

    At the Hanford Site, chromium was used as a corrosion inhibitor in the reactor cooling water and was introduced into the groundwater as a result of planned and unplanned discharges from reactors during plutonium production since 1944. Beginning in 1995, groundwater treatment methods were evaluated leading to the use of pump and treat facilities with ion exchange using Dowex 21 K, a regenerable strong base anion exchange resin. This required regeneration of the resin, which is currently performed offsite. Resin was installed in a 4 vessel train, with resin removal required from the lead vessel approximately once a month. In 2007, there were 8 trains (32 vessels) in operation. In 2008, DOE recognized that regulatory agreements would require significant expansion in the groundwater chromium treatment capacity. Previous experience from one of the DOE project managers led to identification of a possible alternative resin, and the contractor was requested to evaluate alternative resins for both cost and programmatic risk reductions. Testing was performed onsite in 2009 and 2010, using a variety of potential resins in two separate facilities with groundwater from specific remediation sites to demonstrate resin performance in the specific groundwater chemistry at each site. The testing demonstrated that a weak base anion single-use resin, ResinTech SIR-700, was effective at removing chromium, had a significantly higher capacity, could be disposed of efficiently on site, and would eliminate the complexities and programmatic risks from sampling, packaging, transportation and return of resin for regeneration. This resin was installed in Hanford's newest groundwater treatment facility, called 100-DX, which began operations in November, 2010, and used in a sister facility, 100-HX, which started up in September of 2011. This increased chromium treatment capacity to 25 trains (100 vessels). The resin is also being tested in existing facilities that utilize Dowex 21 K for

  14. Chromium-Makes stainless steel stainless

    Science.gov (United States)

    Kropschot, S.J.; Doebrich, Jeff

    2010-01-01

    Chromium, a steely-gray, lustrous, hard metal that takes a high polish and has a high melting point, is a silvery white, hard, and bright metal plating on steel and other material. Commonly known as chrome, it is one of the most important and indispensable industrial metals because of its hardness and resistance to corrosion. But it is used for more than the production of stainless steel and nonferrous alloys; it is also used to create pigments and chemicals used to process leather.

  15. The electronic structure of antiferromagnetic chromium

    DEFF Research Database (Denmark)

    Skriver, Hans Lomholt

    1981-01-01

    The author has used the local spin density formalism to perform self-consistent calculations of the electronic structure of chromium in the non-magnetic and commensurate antiferromagnetic phases, as a function of the lattice parameter. A change of a few per cent in the atomic radius brings...... the calculated ground state properties into agreement with experiment. The magnetisation is studied as function of volume in several models, and it is shown that a Stoner picture provides an extremely accurate description of the full calculation provided the sp-d hybridisation is taken into account. It is found...

  16. Development of electrochemical ion exchange electrodes for the treatment of wastes containing chromium or cesium ions

    International Nuclear Information System (INIS)

    Nowadays, environmental preservation using technologies that do not attack it, generating non-toxic residues and reduced volumes, has been discussed. Hazardous effluents, containing metals, as chromium, have been poured in the soils and rivers, degrading the water. Not different are the problems originated from some nuclear activities that generate wastes, as in chemical research laboratories. Although those wastes are not poured in the environment, sometimes they are inadequately stored, what can cause serious accidents. With the purpose of solving this problem, there are some techniques to waste treatment, between them there is the electrochemical ion exchange (EIX). EIX is an advanced process that has advantages over traditional ion exchange and the fact of using the electron as the only reagent, reduces the volume of the solution to be treated. This technique consists of development of an electrode, where an ion exchanger is physically incorporated in an electrode structure with a binder. In this study, cationic resin Amberlite CG-50 and zirconium phosphate have been chosen for the separation of chromium and cesium from waste, respectively. They were chosen because they present high chemical stability in oxidizing media and at ionizing radiation. The quantity of charcoal, graphite and binder used in formulation of electrode have been studied either. Before choosing the best electrode, it was verified sorption percentage of 99,3% for chromium and 99,8% for cesium. The greater advantage of this process is the total elution of chromium as much as cesium, without reagents addition, being possible to reuse the electrode without losing its capacity. Beside on the results, a continuous process for the wastes containing Cr and Cs, using a flux electrolytic cell (CELFLUX) of high retention capacity, was presented. The high efficiency of this cell for both retention and elution, leading to an important reduction of waste volume, and, every more, making possible the

  17. Removal of Hexavalent Chromium from Aqueous Solutions Using Magnetic Nanoparticles Coated with Alumina and Modified by Cetyl Trimethyl Ammonium Bromide

    Directory of Open Access Journals (Sweden)

    Mohammad Malakootian

    2015-12-01

    Full Text Available Introduction: The development of an effective method regarding chromium removal from the environment is of great importance. Therefore, the present study aimed to examiner magnetic nanoparticles coated with alumina modified by Cetyl Trimethyl Ammonium Bromide (CTAB in the removal of Cr6+ through magnetic solid phase extraction method. Materials & Methods: At first, iron oxide nanoparticles were synthesized, coated with alumina, modified with CTAB and characterized with suitable instruments. The factors affecting the process of chromium removal were investigated, including the concentration of CTAB, the pH, the amount of nanoparticles, the sample volume, a proper eluent, the adsorption and desorption time, and the effect of interfering ions. Moreover, the chromium concentration was determined by flame atomic absorption spectrometric (FAAS technique. The adsorption isotherm, adsorption capacity, and recoverability of the adsorbent were further examined. Results: The modified magnetic nanoparticles were demonstrated to be homogeneous, spherical, with a size lower than 20 nanometer having a magnetic property. The optimal conditions for chromium removal entailed 7*10-6 mol/L concentration of CTAB, pH range of 6-8, 0.1 g of the nanoparticles, 10 mL volume of the chromium sample (5 μg mL-1, nitric acid 2 M as a suitable eluent, 15 minutes of adsorption and desorption, and no interference of interfering ions in the process of chromium separation. The process efficiency under optimal conditions was determined to be over 95%, which this process followed the Langmuir adsorption isotherm. The adsorption capacity proved to be 23.8 mg/g. Reusing after four times of adsorbent recovering was effective in the chromium removal (80%. The method accuracy for five measurement times was 4.155% and the method’s LOD was 0.081 mg/L. Conclusion: The method enjoys the benefits of convenient preparation of the adsorbent, high selectivity, high accuracy, short process

  18. Biological Monitoring of Hexavalent Chromium and Serum Levels of the Senescence Biomarker Apolipoprotein J/Clusterin in Welders

    OpenAIRE

    Vassilios Makropoulos; Gonos, Efstathios S.; Magda Lourda; Trougakos, Ioannis P.; Xenophon Cominos; Alexopoulos, Evangelos C.

    2008-01-01

    Welding fumes contain metals and other toxic substances known or strongly suspected to be related with oxidative stress and premature cellular senescence. Apolipoprotein J/Clusterin (ApoJ/CLU) is a glycoprotein that is differentially regulated in various physiological and disease states including ageing and age-related diseases. In vitro data showed that exposure of human diploid fibroblasts to hexavalent chromium (Cr(VI)) resulted in premature senescence and significant upregulation of the A...

  19. CHROMIUM BIOACCUMULATION FROM COMPOSTS AND VERMICOMPOSTS BASED ON TANNERY SLUDGES

    Directory of Open Access Journals (Sweden)

    Krzysztof GONDEK

    2008-07-01

    Full Text Available Storage of waste substances is not indifferent to ecological equilibrium in the environment therefore should not be the ultimate way to limit waste arduousness. Therefore, the conducted investigations aimed to determine the effect of tannery composts and vermicomposts loaded with chromium on this element bioaccumulation in earthworm bodies and biomass of selected plants. Chromium in composts and vermicomposts based on tannery sludges occurred in small quantities and easily soluble compounds. Chromium concentrations in redworm biomass points to this metal accumulation in Eisenia fetida body tissues. This element content in redworm biomass was signifi cantly positively correlated with its content in composts. Chromium content in plants was diversifi ed and on treatments was generally smaller than on mineral treatment or farmyard manure. Chromium absorbed by plants was stored mainly in the root systems, and over the norm content of this element found in vermicomposts did not cause its excessive accumulation in plant biomass.

  20. Specific features of the electrocrystallization of chromium together with molybdenum

    International Nuclear Information System (INIS)

    A study was made on molybdenum effect on surface structure and some physicomechanical properties of electrolytic chromium during Cr-Mo electrodeposition from CrO3 solutions with additions of SO42- and SiFe62- anions. Cr-Mo deposition was conducted at 55 deg C and 0.5 A/cm2 current density which corresponds to conditions of hard chromizing. It is shown that the change hardness, hydridation and internal stresses of chromium coatings during their alloying with molybdenum is conditioned by structure change. Mo introduction into chromium is not manifested clearly in these characteristics. The change of chromium structure during deposition with molybdenum is probably related both with change of anion relation in cathode film (decrease of catalytic anion content in it) and peculiarities of chromium electrocrystallization. This requires special study with application of methods for investigation into fine and surface structure

  1. Oxidation resistant alloys, method for producing oxidation resistant alloys

    Energy Technology Data Exchange (ETDEWEB)

    Dunning, John S.; Alman, David E.

    2002-11-05

    A method for producing oxidation-resistant austenitic alloys for use at temperatures below 800 C. comprising of: providing an alloy comprising, by weight %: 14-18% chromium, 15-18% nickel, 1-3% manganese, 1-2% molybdenum, 2-4% silicon, 0% aluminum and the balance being iron; heating the alloy to 800 C. for between 175-250 hours prior to use in order to form a continuous silicon oxide film and another oxide film. The method provides a means of producing stainless steels with superior oxidation resistance at temperatures above 700 C. at a low cost

  2. Lubricated sliding wear mechanism of chromium-doped graphite-like carbon coating

    OpenAIRE

    Mandal, Paranjayee; Ehiasarian, Arutiun; Hovsepian, Papken

    2014-01-01

    The current research aims to discuss the tribological behaviour of Chromium-doped graphite-like carbon coatings and suggest a wear mechanism under both dry (in air) and boundary lubricated sliding condition based on phase composition of the wear product generated in wear track during pin-on-disc experiments. As expected, the friction coefficient reduces from 0.22 to 0.12 due to addition of lubricant. Raman analysis indicates that wear mechanism is oxidative in dry sliding condition whereas it...

  3. Evaluation of sublethal toxicity of zinc and chromium in Eudrilus eugeniae using biochemical and reproductive parameters.

    Science.gov (United States)

    Basha, P Mahaboob; Latha, V

    2016-05-01

    Zinc (Zn) and chromium (Cr) act as essential nutrients; however, they can be toxic at higher concentrations. In this study, earthworm species Eudrilus eugeniae was studied for its sensitivity to sublethal doses of Cr (8 ppm) and Zn (350 ppm) in terms of alterations occurred in oxidative stress indices and reproductive parameters in the testis. A significant (p implied from results that excessive free radical production and inadequate antioxidant defenses have lead to morphological alterations in sperms which sequentially reduced the reproductive rate. PMID:26922588

  4. High-temperature dissolution of nickel chromium ferrites by oxalic acid and nitrilotriacetic acid

    International Nuclear Information System (INIS)

    A study of the dissolution of a number of spinel-type oxides containing iron(III) ions by oxalic acid and nitrilotriacetic acid (NTA) is reported. Increasing the chromium content of oxides of general composition Nisub(0.6)Crsub(x)Fesub(2.4-x)O4 (x = 0.3 to 1.5) brought about a marked reduction in dissolution rate, and it is suggested that this arises by a mechanism involving a change from kink-site attack to ledge-site attack as the former become 'blocked' by less reactive chromium(III) ions. The Nisub(0.6)Crsub(0.6)Fesub(1.8)O4 oxide was investigated in more detail. The concentration dependences determined suggest that both oxalic acid and NTA are adsorbed at surface sites prior to dissolution. NTA brings about dissolution simply by 'complexing' attack, but with oxalic acid it was not possible to distinguish directly between complexing and reductive attack. The divalent cation also plays a role, for in the dissolution of a number of ferrites, AFe2O4 (A = Co, Fe, Mn, Ni), in oxalic acid appreciable differences in dissolution rate were found, the order of reactivity being Fe > Mn > Co > Ni. The reasons for this are discussed. (author)

  5. Hexavalent chromium reduction in contaminated soil: A comparison between ferrous sulphate and nanoscale zero-valent iron.

    Science.gov (United States)

    Di Palma, L; Gueye, M T; Petrucci, E

    2015-01-01

    Iron sulphate (FeSO4) and colloidal nano zero-valent iron (nZVI) as reducing agents were compared, with the aim of assessing their effectiveness in hexavalent chromium [Cr(VI)] removal from a contaminated industrial soil. Experiments were performed on soil samples collected from an industrial site where a nickel contamination, caused by a long-term productive activity, was also verified. The influence of reducing agents amount with respect to chromium content and the effectiveness of deoxygenation of the slurry were discussed. The soil was fully characterized before and after each test, and sequential extractions were performed to assess chemico-physical modifications and evaluate metals mobility induced by washing. Results show that both the reducing agents successfully lowered the amount of Cr(VI) in the soil below the threshold allowed by Italian Environmental Regulation for industrial reuse. Cr(VI) reduction by colloidal nZVI proved to be faster and more effective: the civil reuse of soil [Cr(VI)<2mg/kg] was only achieved using colloidal nZVI within 60min adopting a nZVI/Cr(VI) molar ratio of 30. The reducing treatment resulted in an increase in the amount of chromium in the oxide-hydroxide fraction, thus confirming a mechanism of chromium-iron hydroxides precipitation. In addition, a decrease of nickel (Ni) and lead (Pb) content in soil was also observed when acidic conditions were established. PMID:25139286

  6. The mitigative effect of Raphanus sativus oil on chromium-induced geno- and hepatotoxicity in male rats.

    Science.gov (United States)

    Elshazly, M O; Morgan, Ashraf M; Ali, Merhan E; Abdel-Mawla, Essam; Abd El-Rahman, Sahar S

    2016-05-01

    To study the impact of radish oil on the possible genotoxic and hepatotoxic effects of hexavalent chromium, male rats were divided into 4 groups. Group 1 served as control, group 2 received radish oil at the recommended human therapeutic dose (0.07 mL/kg) by gavage, group 3 received sodium dichromate dihydrate (SDD) 520 mg/L in drinking water, and group 4 received both SDD and radish oil as previously mentioned in groups 2 and 3. All treatments were continued for six months. The results revealed that chromium exposure promoted oxidative stress with a consequently marked hepatic histopathological alterations, increased serum alanine aminotransferase (ALT) and alkaline phosphatase (ALP) activities, alfa fetoprotein (AFP) levels, and micronucleated erythrocytes (MNE) % in peripheral blood. Moreover, COMET assay of hepatic DNA revealed that SDD exposure significantly decreased the intact cells %, head diameter, and head DNA % compared to control, indicating DNA damage. However, radish oil co-administration with SDD resulted in marked amendment in the altered parameters as detected by improved liver function markers (ALT and ALP) and AFP level, decreased lipid peroxidation, increased antioxidant markers, inhibited hepatic DNA damage and restored the hepatic histology by preventing the appearance of the altered hepatocytes' foci and decreasing chromium induced histopathological lesions. It could be concluded that radish oil was able to provide a convergent complete protection against the geno- and hepatotoxicity of chromium by its potent antioxidant effect. PMID:27222746

  7. Selenium protection from cadmium and chromium poisoning

    International Nuclear Information System (INIS)

    The interaction of selenium with cadmium and chromium was studied in 168 chicken-broilers (DWCxWR) divided into four equal groups. Eight-week old control animals received an intravenous dose of /sup 115m/Cd Chloride 370 KBq/Kg (Group I), or 51Cr Chloride 370 KBq/Kg (Group II). The kinetics of these isotopes were studied by scintillation spectrometry (NaI/TI) carried out for whole blood, plasma, plasma proteins, urine, feces and homogenates of all organs at various time intervals. Animals in Groups III and IV received eight subcutaneous doses of sodium selenate (5ug) at 8-week intervals prior to /sup 115m/Cd or 51Cr. The kinetics of these elements were studied as in the previous two groups. It was found that selenium affected those kinetics in two ways: (a) by increasing the excretion of Cd by 11 +/- 3% (P < 0.001) and that of Cr by 7 +/- 1% (P < 0.001); and (b) by favoring redistribution of those elements, with significant (P < 0.001) reductions in liver, endocrine glands and kidney and increases (P < 0.01) in bone. The study suggests that selenium protects the animals' vital organs from environmental pollutants, such as cadmium and chromium

  8. The hydrogen anode in chromium electrowinning

    International Nuclear Information System (INIS)

    The use of a hydrogen anode for electrowinning of chromium from an ammonium chromium sulfate electrolyte (chrome alum process) was investigated in a laboratory-scale cell equipped with a diaphragm. The composition of the solution and the temperature followed industrial practice. Current density, pH, and anolyte flow rate through the diaphragm were varied and optimized for the cell. For a cathodic current density of 915 A/m2 at 50oC, the optimum initial pH was 2.37. The hydrogen anode was made of a platinized Toray carbon paper (0.35 mg Pt per cm2) supplied by E-TEK. The hydrogen pressure was maintained at 2 cm H20 above ambient atmosphere. The potential of the hydrogen anode was about 1 V lower than that of a Pb-Ag anode (1%Ag) in a similar cell. As expected, no Cr+6 was generated in the anolyte. The cathodic current efficiency was slightly lower with the hydrogen anode than with the Pb-Ag anode. (author)

  9. Nopalea cochenillifera, a potential chromium (VI) hyperaccumulator plant.

    Science.gov (United States)

    Adki, Vinayak S; Jadhav, Jyoti P; Bapat, Vishwas A

    2013-02-01

    Hexavalant chromium [Cr(VI)] tolerance and accumulation in in vitro grown Nopalea cochenillifera Salm. Dyck. plants was investigated. A micropropagation protocol was establish for a rapid multiplication of N. cochenillifera and [Cr(VI)] tolerance and accumulation was studied in in vitro grown cultures. Cr concentration was estimated by atomic absorption spectroscopy in roots and shoots to confirm plant's hyperaccumulation capacity. Plants showed tolerance up to 100 μM K(2)Cr(2)O(7) without any significant changes in root growth after 16 days treatment; whereas, chlorophyll content in plants treated with 1 and 10 μM K(2)Cr(2)O(7) were not so different than the control plant. The levels of lipid peroxidation and protein oxidation increased significantly (p 100 μM) inhibited the activities of CAT and SOD. Roots accumulated a maximum of 25,263.396 ± 1,722.672 mg Cr Kg(-1) dry weight (DW); while the highest concentration of Cr in N. cochenillifera shoots was 705.714 ± 32.324 mg Cr Kg(-1) DW. N. cochenillifera could be a prospective hyperaccumulator plant of Cr(VI) and a promising candidate for phytoremediation purposes. PMID:22914913

  10. Tetravalent chromium doped laser materials and NIR tunable lasers

    Science.gov (United States)

    Alfano, Robert R. (Inventor); Petricevic, Vladimir (Inventor); Bykov, Alexey (Inventor)

    2008-01-01

    A method is described to improve and produce purer Cr.sup.4+-doped laser materials and lasers with reduced co-incorporation of chromium in any other valence states, such as Cr.sup.3+, Cr.sup.2+, Cr.sup.5+, and Cr.sup.6+. The method includes: 1) certain crystals of olivine structure with large cation (Ca) in octahedral sites such as Cr.sup.4+:Ca.sub.2GeO.sub.4, Cr.sup.4+:Ca.sub.2SiO.sub.4, Cr.sup.4+:Ca.sub.2Ge.sub.xSi.sub.1-xO.sub.4 (where 0oxide, fluoride and/or chloride compounds. Purer Cr.sup.4+-doped laser materials are characterized by a relatively high concentration of Cr.sup.4+-lasing ion in crystalline host that makes these materials suitable for compact high power (thin disk/wedge) NIR laser applications.

  11. Removal of chromium hexavalent of residual water from tannery using hydrotalcite; Remocion de cromo hexavalente de aguas residuales de teneria utilizando hidrotalcita

    Energy Technology Data Exchange (ETDEWEB)

    Martinez G, S.; Martinez, V.; Bulbulian, S. [Instituto nacional de Investigaciones Nucleares, A.P. 18-1027, C.P. 11801 Mexico D.F. (Mexico)

    2000-07-01

    One of the main problems of leather tanned is the treatment that must be give to the waste water polluted with chrome which stays in trivalent form, but it is easily oxidated at chromium hexavalent. This work pretends to find an elimination media for chromium (VI) from water using the original synthetic hydrotalcite and calcined as sorbent by its anion exchange and memory effect properties. The tannery water was characterized by X-ray diffraction, thermal gravimetric analysis, specific surface and infrared spectroscopy. (Author)

  12. Workshop on effects of chromium coating on Nb3Sn superconductor strand: Proceedings

    International Nuclear Information System (INIS)

    This report discusses the following topics: Chromium coating on superconductor strand -- an overview; technology of chromium plating; comparison of wires plated by different platers; search for chromium in copper; strand manufactures' presentations; chromium plating at the Lawrence Livermore National Laboratory; a first look at a chromium plating process development project tailored for T.P.X. and I.T.E.R. strand; and influence of chromium diffusion and related phenomena on the reference ratios of bare and chromium plated Nb3Sn strand

  13. Stabilization of chromium salt in ordinary portland cement

    Indian Academy of Sciences (India)

    Damir Barbir; Pero Dabić; Petar Krolo

    2012-12-01

    Ordinary Portland cement (OPC) samples containing the chromium salt have been investigated using differential microcalorimetry, conductometry and Fourier transform infrared spectroscopic analysis. The effect of chromium on OPC hydration was evaluated by continuous observing of early hydration. The microcalorimetrical results show that with increasing the share of chromium salt, heat maximums assume lower values and the occurrence of the maximum registered in the earlier hydration times. Conductometrical measurements show that with increasing addition of chromium salt, curve did not show any specific shape, immediate drop in specific conductivity is noticed and the maximum is reached earlier. This coincides with microcalorimetrical results. It can be concluded that the addition of chromium does not affect the mechanism of the hydration process, but it does affect the kinetic parameters and dynamics of the cement hydration process. It was found that chromium salt addition to the cement–water system is acceptable up to 2 wt.%. According to standard EN 196-3 for OPC, the beginning of binding time should occur after 60 minutes. Increased amount of chromium over 2 wt.% significantly accelerate the beginning of binding time and for the system it is not acceptable.

  14. Chromium speciation in rainwater: temporal variability and atmospheric deposition

    Energy Technology Data Exchange (ETDEWEB)

    Kieber, R.J.; Willey, J.D.; Zvalaren, S.D. [University of North Carolina at Wilmington, Wilmington, NC (United States). Dept. of Chemistry

    2002-12-15

    Chromium is released into the atmosphere by a variety of anthropogenic activities which include steel manufacturing, leather tanning, wood presentation and fossil fuel combustion. The concentrations of the various chromium species were determined in 89 rainwater samples collected in Wilmington, NC from October 1, 1999 to December 31, 2001. Volume weighted annual average concentrations of Cr{sub total}, particulate Cr, Cr(III)(aq), and Cr(VI)(aq) were 4.6, 2.2, 0.8 and 1.2 nM, respectively. There was distinct seasonal and diurnal variability in the concentrations of the various chromium species. Chromium emissions to the global atmosphere by both natural and anthropogenic sources are estimated to be 2.2 x 10{sup 9} mol/yr. Using rainwater concentration data along with other published rainwater Cr concentrations and an estimate for total global annual rain, the total global flux of chromium removed from the atmosphere via wet deposition is 2.1 x 10{sup 9} mol/yr. This represents complete removal of Cr and indicates that essentially all chromium released into the global atmosphere is removed via rain. About half this chromium is dissolved with roughly equal concentrations of toxic Cr(VI) and relatively harmless Cr(III) species. 48 refs., 4 figs., 3 tabs.

  15. Bioavailability of a potato chromium complex to the laboratory rat

    International Nuclear Information System (INIS)

    Research objectives were to study the effect of food source, preparation method and chemical form on bioavailability of chromium. Chromium concentration in potatoes was determined and tubers labeled either intrinsically or extrinsically with radioactive chromate. A labeled chromium complexes was isolated from preparations of raw, baked or fried potatoes and chromatographed on gel permeation media. Availability of the potato chromium complex to the rat was examined in three feeding studies. Animals were dosed with radioactive extrinsically or intrinsically labeled potato extract or with chromate. A labeled chromium complex was isolated from gastrointestinal contents of rats and chromatographed. Potato pulp and peel contained 1.63 and 2.70 μg Cr/g tissue respectively. True and apparent absorption from extrinsically labeled feedings were 33.4 +/- 4.7 and 29.8 +/- 11.2% respectively, and no differences existed between absorption from raw and cooked potatoes. Absorption from the extrinsic labeled potatoes differed significantly from absorption of inorganic chromatium. Apparent absorption of raw (11.1 +/- 7.9%) and cooked (-0.7 +/- 2.8%) intrinsically labeled feedings differed significantly. Absorption of inorganic chromium was 17.8% (true) and 11.5% (apparent). Examination of the chromium complex isolated from gastrointestinal tract contents showed enlargement of the complex in the stomach after consumption

  16. Chromium-induced membrane damage: protective role of ascorbic acid

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Importance of chromium as environmental toxicant is largely due to impact on the body to produce cellular toxicity. The impact of chromium and their supplementation with ascorbic acid was studied on plasma membrane of liver and kidney in male Wistar rats (80 - 100gbody weight). It has been observed that the intoxication with chromium ( i. p. ) at the dose of 0.8 mg/100g body weight per day for a period of 28 days causes significant increase in the level of cholesterol and decrease in the level of phospbolipid of both liver and kidney. The alkaline pbosphatase, total ATPase and Na + -K + -ATPase activities were significantly decreased in both liver and kidney after chromium treatment,except total ATPase activity of kidney. It is suggested that chromium exposure at the present dose and duration induce for the alterations of structure and function of both liver and kidney plasma membrane. Ascorbic acid ( i.p. at the dose of 0.5 mg,/100g body weight per day for period of 28 days) supplementation can reduce these structural changes in the plasma membrane of liver and kidney. But the functional changes can not be completely replenished by the ascorbic acid supplementation in response to chromium exposure. So it is also suggested that ascorbic acid (nutritional antioxidant) is useful free radical scavenger to restrain the chromium-induced membrane damage.

  17. Fertilizers and Mixed Crop Cultivation of Chromium Tolerant and Sensitive Plants under Chromium Toxicity

    OpenAIRE

    B. Dheeba; Sampathkumar, P; Kannan, K.

    2015-01-01

    Zea mays (maize) and Vigna radiata (green gram) are found to be the chromium (Cr) tolerant and sensitive plants, respectively. In the present paper, we investigate the reduction of the toxicity of Cr in the sensitive plants by the mixed crop cultivation in the field using various amendments. Further, the potassium dichromate was used as the source of hexavalent Cr. The results indicated that Cr adversely affects both the growth and yield of plants. The soil properties vary with Cr and differe...

  18. Evaluating the risk of chromium reoxidation in aquifer sediments following a reductive bioremediation treatment

    Science.gov (United States)

    Varadharajan, C.; Nico, P. S.; Yang, L.; Han, R.; Bill, M.; Larsen, J.; Van Hise, A.; Molins, S.; Steefel, C.; Conrad, M. E.; Lim, H.; Brodie, E. L.; Beller, H. R.

    2011-12-01

    Remediation of chromium contamination typically involves reducing the toxic and soluble hexavalent form, Cr(VI), to the relatively harmless and mostly immobile trivalent state, Cr(III). The objective of this study is to investigate the potential for reduced chromium precipitates to be remobilized under oxidizing conditions that are expected to be prevalent some time after the bioremediation treatment is completed. In an initial phase of the experiment, reduction under anaerobic conditions was observed for over 12 months by subjecting flow-through columns containing homogenized sediments from the Hanford 100H aquifer to different dominant electron acceptors, i.e. NO3-, Fe(III), or SO42-, in the presence of 5 μM Cr(VI) and 5 mM lactate. Cr(VI) was depleted in the effluent solutions of the nitrate-treated columns, all of which exhibited denitrification, as well as in sulfate-amended columns in which fermentative conditions became dominant (with a minor amount of sulfate reduction). In the second phase of the study, oxygenated water with 2 mM nitrate was flowed through the denitrifying and fermentative columns for several months, without addition of Cr(VI) or lactate. The results show that the chromium that precipitated in the denitrifying columns was steadily mobilized under the oxidizing conditions, although the concentration of Cr(VI) in the effluent remained low (effluent from the fermentative sulfate-amended column. Reducing conditions were sustained in the fermentative column despite the continuous influx of O2, as indicated by the decrease of nitrate and accumulation of nitrite, potentially due to the presence of sulfides precipitated during the initial reducing phase of the experiment. The results from this study suggest that the biogeochemical conditions present during the reductive treatment phase can substantially impact the long-term sustainability of the remediation effort.

  19. Hexavalent chromium reduction in a sulfur reducing packed-bed bioreactor

    International Nuclear Information System (INIS)

    Highlights: ► Elemental sulfur can be used as electron acceptor for sulfide production. ► Biogenically produced sulfide reduces Cr(VI) to the much less toxic and immobile form of Cr(III). ► Sulfur packed bioreactor is efficient for Cr(VI) containing wastewater treatment. ► Reduced form of chromium precipitates in the bioreactor. - Abstract: The most commonly used approach for the detoxification of hazardous industrial effluents and wastewaters containing Cr(VI) is its reduction to the much less toxic and immobile form of Cr(III). This study investigates the cleanup of Cr(VI) containing wastewaters using elemental sulfur as electron acceptor, for the production of hydrogen sulfide that induces Cr(VI) reduction. An elemental sulfur reducing packed-bed bioreactor was operated at 28–30 °C for more than 250 days under varying influent Cr(VI) concentrations (5.0–50.0 mg/L) and hydraulic retention times (HRTs, 0.36–1.0 day). Ethanol or acetate (1000 mg/L COD) was used as carbon source and electron donor. The degree of COD oxidation varied between 30% and 85%, depending on the operating conditions and the type of organic carbon source. The oxidation of organic matter was coupled with the production of hydrogen sulfide, which reached a maximum concentration of 750 mg/L. The biologically produced hydrogen sulfide reduced Cr(VI) chemically to Cr(III) that precipitated in the reactor. Reduction of Cr(VI) and removal efficiency of total chromium always exceeded 97% and 85%, respectively, implying that the reduced chromium was retained in the bioreactor. This study showed that sulfur can be used as an electron acceptor to produce hydrogen sulfide that induces efficient reduction and immobilization of Cr(VI), thus enabling decontamination of Cr(VI) polluted wastewaters.

  20. Microbial Diversity of Chromium-Contaminated Soils and Characterization of Six Chromium-Removing Bacteria

    Science.gov (United States)

    He, Zhiguo; Hu, Yuting; Yin, Zhen; Hu, Yuehua; Zhong, Hui

    2016-06-01

    Three soil samples obtained from different sites adjacent to a chromium slag heap in a steel alloy factory were taken to examine the effect of chromium contamination on soil bacterial diversity as determined by construction of 16S rDNA clone libraries and sequencing of selected clones based on restriction fragment length polymorphism (RFLP) analysis. Results revealed that Betaproteobacteria, Gammaproteobacteria, Firmicutes, and Alphaproteobacteria occurred in all three soil samples, although the three samples differed in their total diversity. Sample 1 had the highest microbial diversity covering 12 different classes, while Sample 3 had the lowest microbial diversity. Strains of six different species were successfully isolated, one of which was identified as Zobellella denitrificans. To our knowledge, this is the first report of a strain belonging to the genus Zobellella able to resist and reduce chromium. Among all isolates studied, Bacillus odysseyi YH2 exhibited the highest Cr(VI)-reducing capability, with a total removal of 23.5 % of an initial Cr(VI) concentration of 350 mg L-1.

  1. Chromium removal from tannery wastewater by using of flying ash

    International Nuclear Information System (INIS)

    A simple and economic method to chromium removal from tannery wastewater by means of flying ash is presented. The chromium removal operation is a discontinuous process that involve the mass of flying ash, time of contact and temperature or ph as variables, their which are optimized through Box-Wilson type experimental design. The results were successful: From an initial fluid whit chromium concentration of 1850m ppm, final concentrations of 0.008 ppm and 0.5 ppm of Cr+3 and Cr+6 respectively were achieved. These post-treatment concentrations are into the approved range definite by Government's Laws to this waste type

  2. A REVIEW OF BIOSORPTION OF CHROMIUM IONS BY MICROORGANISMS

    Directory of Open Access Journals (Sweden)

    Inga Zinicovscaia

    2012-12-01

    Full Text Available Due to its widespread industrial use, chromium has become a serious pollutant in diverse environmental settings. The main source of chromium pollution including the Republic o Moldova is industry. It is a great need to develop new eco-friendly methods of chromium removal. Biosorption of heavy metals is a most promising technology involved in the removal of toxic metals from industrial waste streams and natural waters. This article is an extended abstract of a communication presented at the Conference Ecological Chemistry 2012

  3. Effects of Supplemental Dietary Chromium on Yield and Nutrient Digestibility of Laying Hens Under Low Temperature

    OpenAIRE

    ŞAHİN, Kazım; ERTAŞ, O. Nihat; GÜLER, Talat; ÇİFTÇİ, Mehmet

    2001-01-01

    This study was conducted to determine the effects of chromium picolinate (CrPi) added into diet containing 710.3 ppb chromium on yield and nutrient digestibility of laying hens at low temperature. Forty-six-week-old laying hens were randomly assigned to four groups of 30 hens per group. Treatment groups were fed different supplemental dietary chromium levels. Thus, hens were fed diets with no supplemental chromium (Control Group), 100 ppb of supplemental chromium (100 Group), 200 ppb of s...

  4. Evaluation of the comprehensiveness and reliability of the chromium composition of foods in the literature ☆

    OpenAIRE

    Thor, Mayly Y.; Harnack, Lisa; King, Denise; Jasthi, Bhaskarani; Pettit, Janet

    2011-01-01

    In the early 1960s, trivalent chromium Cr3+ became recognized as an essential trace element due to its potential metabolic and cardiovascular benefits. No comprehensive chromium database currently exists; thus a thorough review of the literature was conducted to examine the availability and reliability of chromium data for foods. A number of key issues were identified that challenge the feasibility of adding chromium to a food and nutrient database. Foremost, dietary chromium data reported in...

  5. Chromium(III) complexation to natural organic matter : Mechanisms and modeling

    OpenAIRE

    Gustafsson, Jon Petter; Persson, I.; Oromieh, A. G.; Van Schaik, J. W. J.; Sjöstedt, Carin; Kleja, D. B.

    2014-01-01

    Chromium is a common soil contaminant, and it often exists as chromium(III). However, limited information exists on the coordination chemistry and stability of chromium(III) complexes with natural organic matter (NOM). Here, the complexation of chromium(III) to mor layer material and to Suwannee River Fulvic Acid (SRFA) was investigated using EXAFS spectroscopy and batch experiments. The EXAFS results showed a predominance of monomeric chromium(III)-NOM complexes at low pH (<5), in which o...

  6. Pool Boiling Heat Transfer Characteristics of Chromium Coatings Deposited by RF Magnetron Sputtering

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Gwang Hyeok; Son, Hong Hyun; Jeong, Uiju; Jeun, Gyoodong; Kim, Sung Joong [Hanyang University, Seoul (Korea, Republic of)

    2015-05-15

    Many researches have suggested fundamental changes to satisfy the safety requirements, including development of accident tolerant fuels (ATFs). The adoption of coating techniques is one of promising approaches for ATF systems because surface modification with a highly oxidation-resistant material can prevent hydrogen generation and cladding embrittlement. Compared to the development of a new cladding for the replacement of the current zirconium-based alloy cladding and new fuel forms instead of the current ceramic oxide fuels, the surface coating technique is cost-effective and easily applicable to the current LWR system with no significant design changes. Recently, a wide variety of oxidation-resistant materials have been proposed: iron-based alloys and SiC-based materials. Among them, chromium (Cr) is suggested as a coating material for fuel claddings because it is known for has oxidation-resistant characteristic. In order to assess the feasibility of coating techniques with an oxidation-resistant material, in this study chromium (Cr) film was deposited on a metal substrate via a physical vapor deposition (PVD) process. After preparing test specimens, pool boiling heat transfer experiments were carried out to investigate the boiling performance of both cases. Moreover, during a test, visualization works were conducted for a phenomenological understanding. In this study, Cr deposition on the SS316 surface was conducted using the sputtering process. Specifically, sophisticated surface characterization was performed with the wettability measurement and surface morphology analysis. Furthermore, the pool boiling heat transfer experiments were carried out to obtain the CHF value of the test heater. The major findings observed from this study can be summarized as follows. The surface wettability increased 77% after the sputtering deposition.

  7. Evaluation of chromite ore and the optimum methods for industrial extraction of chromium

    International Nuclear Information System (INIS)

    Samples of chromite ore, collected from Gam and Cheikay mining area (Ingaessana Hills) in east Sudan, were analysed to assess the chromium content. Analysis were carried out using atomic absorption spectroscopy (AAS) to estimate the contents of chromium, iron, calcium and magnesium. X-ray florescence (XRF) was used to evaluate the levels of chromium, iron and calcium in the ore. Volumetric analysis was performed to assess chromium and iron, whilest gravimetric analysis was employed to measure the amounts of calcium, magnesium, aluminum and silicon present in the ore. The results are in a good agreement except iron oxide, which displayed a significantly different value when measured by x-ray fluorescence. The data obtained exhibited similarity in almost all cases, when compared with local and global researches, reports and literature. The study has revealed the average contents of Cr2O3, FeO, CaO, MgO, Al2O3, and SiO2 as 40.66, 11.96, 11.94, 0.36, 16.94, 11.45% respectively. MnO and NiO were detected in trace amounts, the corresponding levels in the ore being 72 and 27 ppm. The average chromium content in extracted potassium dichromate measured by using AAS, XRF, and volumetric methods was found to be 31.7%. The highest grade reached by individual technique being 33.10%. The extraction with sodium peroxide is the optimum method for preparation of potassium dichromate. X-ray diffraction analysis, has showed that the d spaces and intensities of prepared potassium dichromate are isostructural with the corresponding ones of standard potassium dichromate. This suggests that the composition of the two samples is identical. Chromite samples were analysed using gamma ray spectroscopy in order to estimate the levels of radioactive elements present. It was found that the concentrations of 232 Th and 40 K range from 7.62 to 10.98 Bq/kg and 47.38 to 56.28 Bq/kg respectively

  8. Chromium accumulation, microorganism population and enzyme activities in soils around chromium-containing slag heap of steel alloy factory

    Institute of Scientific and Technical Information of China (English)

    HUANG Shun-hong; PENG Bing; YANG Zhi-hui; CHAI Li-yuan; ZHOU Li-cheng

    2009-01-01

    The environmental risk of chromium pollution is pronounced in soils adjacent to chromate industry. It is important to investigate the functioning of soil microorganisms in ecosystems exposed to long-term contamination by chromium. 45 soil samples obtained from different places of the slag heap in a steel alloy factory were analyzed for chromium contamination level and its effect on soil microorganisms and enzyme activities. The results show that the average concentrations of total Cr in the soil under the slag heap, adjacent to the slag heap and outside the factory exceed the threshold of Secondary Environmental Quality Standard for Soil in China by 354%, 540% and 184%, respectively, and are 15, 21 and 9 times higher than the local background value, respectively. Elevated chromium loadings result in changes in the activity of the soil microbe, as indicated by the negative correlations between soil microbial population and chromium contents. Dehydrogenase activity is greatly depressed by chromium in the soil. The results imply that dehydrogenase activity can be used as an indicator for the chromium pollution level in the area of the steel alloy factory.

  9. Evaluation of chromium in red blood cells as an indicator of exposure to hexavalent chromium: An in vitro study.

    Science.gov (United States)

    Devoy, Jérôme; Géhin, Antoine; Müller, Samuel; Melczer, Mathieu; Remy, Aurélie; Antoine, Guillaume; Sponne, Isabelle

    2016-07-25

    Chromium(VI) compounds are classified as carcinogenic to humans. Whereas chromium measurements in urine and whole blood (i.e., including plasma) are indicative of recent exposure, chromium in red blood cells (RBC) is attributable specifically to Cr(VI) exposure. Before recommending Cr in RBC as a biological indicator of Cr(VI) exposure, in-vitro studies must be undertaken to assess its reliability. The present study examines the relationship between the chromium added to a blood sample and that subsequently found in the RBC. After incubation of total blood with chromium, RBC were isolated, counted and their viability assessed. Direct analysis of chromium in RBC was conducted using Atomic Absorption Spectrometry. Hexavalent, but not trivalent Cr, was seen to accumulate in the RBC and we found a strong correlation between the Cr(VI) concentration added to a blood sample and the amount of Cr in RBC. This relationship appears to be independent of the chemical properties of the human blood samples (e.g., different blood donors or different reducing capacities). Even though in-vivo studies are still needed to integrate our understanding of Cr(VI) toxicokinetics, our findings reinforce the idea that a single determination of the chromium concentration in RBC would enable biomonitoring of critical cases of Cr(VI) exposure. PMID:27178267

  10. Neutron capture by the chromium isotopes

    International Nuclear Information System (INIS)

    Capture cross sections of the chromium isotopes have been measured at neutron energies up to 350 keV using the capture cross section facility at the 40 m station of the Oak Ridge Electron Linear Accelerator. Parameters have been derived for 180 resonances. A moderate correlation [rho(gamma-n-0,gamma-gamma) approximately 0.45] is observed between reduced neutron widths and radiative widths for s-wave resonances. Calculations of valence widths show that valence capture can only account for the correlated component of the observed radiative widths. An additional mechanism such as a 2p-1h doorway state must therefore be occurring to explain the uncorrelated component. (author)

  11. SENSITIVITY OF HANFORD IMMOBILIZED HIGH LEVEL WASTE (IHLW) GLASS MASS TO CHROMIUM AND ALUMINUM PARTITIONING ASSUMPTIONS

    International Nuclear Information System (INIS)

    The strategy for the treatment of the Hanford Site tank wastes involves water and caustic washing of the tank waste sludges to reduce sludge mass and the corresponding mass of high-level waste (HLW) glass that will be generated by the Waste Treatment and Immobilization Plant (WTP). During fiscal year (FY) 2003 CH2M HILL Hanford Group, Inc. (CH2M HILL) developed revised water wash and caustic leach factors for chromium (RPP-10222) and aluminum (RPP-11079) to estimate the waste treatment behavior of the tank waste compositions. Subsequently, the U.S. Department of Energy, Office of River Protection (ORP) requested that CH2M HILL evaluate the potential impacts to the HLW glass mass due to these revised water wash and caustic leach factors. ORP plans to use the results of this study in conjunction with separate information regarding the process impacts of implementing oxidative leaching at the WTP to determine whether oxidative leaching is adequate to mitigate potential increases in HLW glass production or whether additional strategies are required. The purpose of this sensitivity study of immobilized HLW glass mass to chromium and aluminum partitioning assumptions was to: (1) Identify the impacts of the revised water wash and caustic leach factors for chromium and aluminum on the mass of HLW glass. (2) Understand the effect of oxidative leaching on the mass of HLW glass. (3) Identify the major influences for HLW glass mass and waste blending. (4) Characterize the degree of pretreatment (water washing, caustic leaching, and oxidative leaching) assumed for different source tanks. (5) Identify candidate tanks for opportunistic sampling and testing to confirm the inventory and better understand the behavior of chromium during retrieval, staging, and subsequent processing. The study concluded that: (1) Application of the revised chromium and aluminum wash and leach factors will increase the HLW glass mass by about 60 to 100 percent (using the relaxed glass properties model

  12. Grafted chromium 13-membered dioxo-macrocyclic complex into aminopropyl-based nanoporous SBA-15

    Energy Technology Data Exchange (ETDEWEB)

    Tarlani, Aliakbar, E-mail: Tarlani@ccerci.ac.ir [Inorganic Nanostructures and Catalysts Research Laboratory, Chemistry and Chemical Engineering Research Center of Iran, Pajoohesh Boulevard, km 17, Karaj Highway, Tehran 14968-13151 (Iran, Islamic Republic of); Joharian, Monika; Narimani, Khashayar [Inorganic Nanostructures and Catalysts Research Laboratory, Chemistry and Chemical Engineering Research Center of Iran, Pajoohesh Boulevard, km 17, Karaj Highway, Tehran 14968-13151 (Iran, Islamic Republic of); Muzart, Jacques [Institut de Chimie Moléculaire de Reims, CNRS-Université de Reims Champagne-Ardenne, BP 1039, 51687 Reims Cedex 2 (France); Fallah, Mahtab [Inorganic Nanostructures and Catalysts Research Laboratory, Chemistry and Chemical Engineering Research Center of Iran, Pajoohesh Boulevard, km 17, Karaj Highway, Tehran 14968-13151 (Iran, Islamic Republic of)

    2013-07-15

    In a new approach, chromium (III) tetraaza dioxo ligand was grafted onto functionalized SBA-15 after four step reactions by using coordinating ability of anchored amino functionalized SBA-15. After the termination of each step, the obtained product was characterized by FT-IR, low-angle X-ray diffraction (LA-XRD), N{sub 2} adsorption–desorption isotherms (Brunauer–Emmett–Teller (BET)–Barret–Joyner–Halenda (BJH)) and thermogravimetric analysis (TGA), and used as catalyst for the efficient and regioselective alcoholysis of styrene oxide to 2-alkoxy-1-phenylethanol product at ambient temperature. - Graphical abstract: Chromium (III) tetraaza dioxo ligand was grafted onto functionalized SBA-15 using coordinating ability of anchored amino functionalized SBA-15. Preparation of the catalyst is depicted in Scheme 1. - Highlights: • Dioxo tetraazachromium macrocyclic complex grafted into the SBA-15-NH{sub 2} channels. • The bond is created by coordinating ability of anchored amino functionalized SBA-15. • The prepared nanocatalyst has superior activity in the alcoholysis of styrene oxide. • The catalyst is reusable at ambient temperature for the mentioned reaction.

  13. Reduction of vanadium oxide by carbon in stainless steelmaking slags

    Energy Technology Data Exchange (ETDEWEB)

    Divakar, M.; Lahiri, A.K. [Indian Inst. of Science, Bangalore (India). Dept. of Metallurgy; Goernerup, M. [Uddeholm Technology AB (Sweden)

    2001-02-01

    Simultaneous reduction of chromium, iron and vanadium oxides by carbon has been studied by conducting experiments on typical stainless steelmaking slags in the temperature range of 1823 to 1923 K. In-situ gas generated due to the reduction led to several phenomena such as foam/emulsion formation, change in foam height, size of gas bubbles and rate of gas generation. The kinetics of vanadium oxide reduction by carbon are studied under the influence of the above mentioned phenomena and the presence of chromium and iron oxides. (orig.)

  14. Chromium and Polyphenols from Cinnamon and Insulin Sensitivity

    Science.gov (United States)

    Factors that improve insulin sensitivity usually lead to improvements in risk factors associated with the metabolic syndrome, diabetes, and cardiovascular diseases. Naturally occurring bioactive compounds that have been shown to improve insulin sensitivity include chromium and polyphenols found in ...

  15. Synthesis and characterization of novel chromium pillared clays

    International Nuclear Information System (INIS)

    New chromium pillared clays of basal spacing 2.45 nm were synthesized and characterized. The chromium oligomers used for intercalation were prepared by quick addition of base and acid to Cr(III) monomeric solutions followed by reflux. The synthesized clays exhibit increased BET surface area and higher micropore volume compared to clays with lower galleries, pillared either by smaller Cr(III) oligomers or by Cr(III) monomers. Important parameters affecting the d001 basal spacing were studied, e.g. the pH of the pillaring solution, the intercalation time, the chromium concentration and the counter-anion present in the chromium solutions. Scanning electron micrographs were acquired to demonstrate changes of the clay texture before and after pillaring. The thermal behavior of the synthesized clays was also examined

  16. Adsorption Properties of Chromium (VI by Chitosan Coated Montmorillonite

    Directory of Open Access Journals (Sweden)

    Dahe Fan

    2006-01-01

    Full Text Available The adsorption of chromium (VI by Chitosan Coated Montmorillonite (CCM from aqueous solution was studied. To evaluate the adsorption capacity, the effects of pH, initial concentration and temperature on the adsorption were investigated. The isothermal data was applied to Langmuir linear and the Freundlich linear isotherm equation and the thermodynamic parameters (ΔH, ΔG, ΔS were calculated according to the values of binding Langmuir constant, KL. Results indicated that the adsorption between CCM and chromium (VI was significantly physical, the negative ΔH constant at lower temperature confirmed that the more chromium (VI was adsorbed by chitosan coated montmorillonite at lower temperature. The kinetics of the sorption process of chromium (VI on chitosan coated montmorillonite were investigated using the pseudo-first order and pseudo-second order kinetics, results showed that the pseudo-second order equation model provided the best correlation with the experimental results.

  17. IRIS Toxicological Review of Hexavalent Chromium (Peer Review Plan)

    Science.gov (United States)

    EPA is conducting a peer review of the scientific basis supporting the human health hazard and dose-response assessment of hexavalent chromium that will appear on the Integrated Risk Information System (IRIS) database.

  18. Fabrication of high rate chromium getter sources for fusion applications

    International Nuclear Information System (INIS)

    Design and fabrication techniques are described for the manufacture of large-capacity chromium getter sources, analogous to the commercially available titanium getter source known as Ti-Ball, manufactured by Varian Associates

  19. Detecting Grain-Boundary Chromium Depletion in Inconel 600

    Science.gov (United States)

    Airey, G. P.; Vaia, A. R.; Pessall, N.; Aspden, R. G.

    1981-11-01

    Techniques to evaluate grain-boundary chromium depletion in Inconel Alloy 600 were investigated. Procedures studied were a modified Huey test, reactivation polarization, magnetic permeability measurements, and eddy current measurements. Results from these tests were correlated with susceptibility to stress-assisted intergranular cracking in polythionic acid. Thermally treated Inconel Alloy 600 steam generator tubing was the principal source of material evaluated, but experimental heats of Ni-Cr-Fe alloys with 8-18 wt.% Cr were prepared to determine the critical chromium level below which stress-assisted intergranular cracking occurs; this critical chromium content was found to be between 9.8 and 11.7 wt.%. All four techniques were considered suitable to evaluate grain-boundary chromium depletion; the modified Huey test and reactivation polarization technique showed a greater sensitivity than the magnetic permeability and eddy current measurements.

  20. The diffusion of chromium in a duplex alloy steel

    International Nuclear Information System (INIS)

    Diffusion of chromium in a duplex stainless steel containing approximately 8% ferrite has been investigated in the temperature range 600 to 10000C using the standard serial sectioning technique. The resulting concentration profiles exhibited up to four distinct regions. The two main regions are attributed to volume diffusion in the austenite and ferrite phases, the other zones being due to short circuiting paths. Volume diffusion in the austenite phase is in good agreement with chromium diffusion in Type 316 steel. The chromium diffusion coefficient in the ferrite phase of approximate composition 25 wt % Cr, 5 wt % Ni is given by: Dsub(α) = (6.0(+11,-3)) x 10-6 exp - ((212+-5)/RT) m2s-1 the activation energy being expressed in kJ.mol-1. Little evidence was found for enhanced chromium diffusion along austenite/ferrite interface boundaries. (author)

  1. Chromium plating pollution source reduction by plasma source ion implantation

    International Nuclear Information System (INIS)

    There is growing concern over the environmental toxicity and workers' health issues due to the chemical baths and rinse water used in the hard chromium plating process. In this regard the significant hardening response of chromium to nitrogen ion implantation can be environmentally beneficial from the standpoint of decreasing the thickness and the frequency of application of chromium plating. In this paper the results of a study of nitrogen ion implantation of chrome plated test flats using the non-line-of-sight Plasma Source Ion Implantation (PSII) process, are discussed. Surface characterization was performed using Scanning Electron Microscopy (SEM), Auger Electron Spectroscopy (AES), and Electron Spectroscopy for Chemical Analysis (ESCA). The surface properties were evaluated using a microhardness tester, a pin-on-disk wear tester, and a corrosion measurement system. Industrial field testing of nitrogen PSII treated chromium plated parts showed an improvement by a factor of two compared to the unimplanted case

  2. New Chromium Carbonyl Catalysts for [6+2] Cycloaddition Reactions

    OpenAIRE

    Kundig, Ernst Peter; Robvieux, Fabrice; Kondratenko, Mikhail

    2002-01-01

    The complexes, (benzene)chromiumdicarbonyl(methyl acrylate) and chromiumdicarbonylbis(cyclohexadiene), are precursors for the highly coordinatively unsaturated chromium dicarbonyl fragment 3, a catalyst for the cycloaddition of activated olefins to cycloheptatriene.

  3. 镍铬-镍硅热电偶老化失效机理初探%Primary study of nickel chromium-nickel silicon thermocouple aging failure mechanism

    Institute of Scientific and Technical Information of China (English)

    谌立新; 郭卫芳; 陈东

    2011-01-01

    In this paper,the oxidation of nickel chromium-nickel silicon thermocouple after 605h aging failure test in the atmosphere in 1200℃ was carried out and the oxidation process was analysed,and that the priority oxidation of the Si and Ni in the nickel-silicon alloy is main cause of the tolerance of nickel chromium-nickel silicon thermocouple thermo-electromotive force.%就镍铬-镍硅热电偶在大气中1200℃、605h老化失效试验后的氧化情况进行了分析,对氧化过程进行了探讨,结果表明镍硅合金中的硅和镍的优先氧化是引起镍铬-镍硅热电偶热电动势超差的主要原因。

  4. Biosorption of Chromium (VI) from Aqueous Solutions onto Fungal Biomass

    OpenAIRE

    Ismael Acosta R.; Xöchitl Rodríguez; Conrado Gutiérrez; Ma. de Guadalupe Moctezuma

    2004-01-01

    The biosorption of chromium (VI) on eighteen different natural biosorbents: Natural sediment, chitosan, chitin, Aspergillus flavus I-V, Aspergillus fumigatus I-ll, Helmintosporium sp, Cladosporium sp, Mucor rouxii mutant, M. rouxii IM-80, Mucor sp-I and 2, Candida albicans and Cryptococcus neoformans was studied in this work. It was found that the biomass of C. neoformans, natural sediment, Helmintosporium sp and chitosan was more efficient to remove chromium (VI) (determined spectrophotometr...

  5. Stainless Steel Leaches Nickel and Chromium into Foods During Cooking

    OpenAIRE

    Kamerud, Kristin L.; Hobbie, Kevin A.; Anderson, Kim A.

    2013-01-01

    Toxicological studies show that oral doses of nickel and chromium can cause cutaneous adverse reactions such as dermatitis. Additional dietary sources, such as leaching from stainless steel cookware during food preparation, are not well characterized. This study examined stainless steel grades, cooking time, repetitive cooking cycles, and multiple types of tomato sauces for their effects on nickel and chromium leaching. Trials included three types of stainless steels and a stainless steel sau...

  6. Genetic Predisposition for Dermal Problems in Hexavalent Chromium Exposed Population

    OpenAIRE

    Priti Sharma; Vipin Bihari; Agarwal, Sudhir K.; Goel, Sudhir K.

    2012-01-01

    We studied the effect of genetic susceptibility on hexavalent chromium induced dermal adversities. The health status of population was examined from the areas of Kanpur (India) having the elevated hexavalent chromium levels in groundwater. Blood samples were collected for DNA isolation to conduct polymorphic determination of genes, namely: NQO1 (C609T), hOGG1 (C1245G), GSTT1, and GSTM1 (deletion). Symptomatic exposed subjects (n = 38) were compared with asymptomatic exposed subjects (n = 108)...

  7. Chromium (V) compounds as cathode material in electrochemical power sources

    Science.gov (United States)

    Delnick, F.M.; Guidotti, R.A.; McCarthy, D.K.

    A cathode for use in a thermal battery, comprising a chromium (V) compound. The preferred materials for this use are Ca/sub 5/(CrO/sub 4/)/sub 3/Cl, Ca/sub 5/(CrO/sub 4/)OH, and Cr/sub 2/O/sub 5/. The chromium (V) compound can be employed as a cathode material in ambient temperature batteries when blended with a suitably conductive filler, preferably carbon black.

  8. SCIENCE AND TECHNOLOGY ACTIVITIES FOR CHROMIUM IN THE 100 AREAS

    Energy Technology Data Exchange (ETDEWEB)

    PETERSEN SW

    2009-07-02

    {sm_bullet} Primary Objective: Protect the Columbia River - Focus is control and treatment of contamination at or near the shoreline, which is influenced by bank storage {sm_bullet} Secondary Objective: Reduce hexavalent chromium to <48 parts per billion (ppb) in aquifer (drinking water standard) - Large plumes with isolated areas of high chromium concentrations (> 40,000 ppb), - Unknown source location(s); probably originating in reactor operation areas

  9. DANGER OF HEXAVALENT CHROMIUM AND STRATEGY FOR THE REMEDITATION

    OpenAIRE

    Aniruddha Roy; Ayan Das; Nirmal Paul

    2013-01-01

    Some metals as micronutrients have a major role in the life and growth process of plants and animals. However, certain forms of some metals may also act as toxic material even in relatively small quantities. Chromium is such a metal, whose concentration above a certain limit may cause a serious problem to the health of living organisms. Chromium (Cr) may occur in several chemical forms in organic and inorganic systems. In biological systems only Cr (III) and Cr (VI) are signifi...

  10. Stereology of carbide phase in modified hypereutectic chromium cast iron

    Directory of Open Access Journals (Sweden)

    J. Suchoń

    2010-04-01

    Full Text Available In paper are presented results of studies of carbide phase stereology modified hypereutectic wear resistance chromium cast iron which contains carbon about 3,5% and chromium about 25%. Three substances were applied to the modification: boron carbide (B4C, ferroniobium (FeNb and mixture of ferroniobium and rare-earth (RE. The measurements of geometrical features of carbides were conducted on microsection taken from castings wich were cooled with various velocities.

  11. Stereology of carbide phase in modified hypereutectic chromium cast iron

    OpenAIRE

    J. Suchoń; A. Studnicki; M. Przybył

    2010-01-01

    In paper are presented results of studies of carbide phase stereology modified hypereutectic wear resistance chromium cast iron which contains carbon about 3,5% and chromium about 25%. Three substances were applied to the modification: boron carbide (B4C), ferroniobium (FeNb) and mixture of ferroniobium and rare-earth (RE). The measurements of geometrical features of carbides were conducted on microsection taken from castings wich were cooled with various velocities.

  12. X-ray photoelectron spectroscopic study of chromium sorbed on montmorillonite

    International Nuclear Information System (INIS)

    Chromium, a potentially toxic element, sorbs on clays like montmorillonite, and can also form Cr-hydroxy polymers in the interlayer of this expansible clay. Therefore, Cr may be at least partially immobilized in systems that contain montmorillonite, provided Cr is present as Cr(III). The oxidation state of Cr sorbed on montmorillonite from aqueous solutions containing Cr(III) was examined by X-ray photoelectron spectroscopy. The data show that no detectable amounts of Cr(III) sorbed on montmorillonite are oxidized by O2 or by components present in the clay such as Mn-bearing minerals. This result supports the contention that expanding clays like montmorillonite may serve as effective sinks for Cr in some contaminated environments. (author). 19 refs., 3 tabs., 4 figs

  13. Comparative Biosorption Studies of Hexavalent Chromium Ion onto Raw and Modified Palm Branches

    Directory of Open Access Journals (Sweden)

    Mona A. Shouman

    2013-01-01

    Full Text Available The waste of palm branches (PB was tested for its ability to remove chromium (VI from aqueous solution by batch and column experiments. Palm branches chemically modified with an oxidizing agent (sulphuric acid then coated with chitosan and surfactant (hexadecyl trimethyl ammonium bromide surfactant, HDTMA, respectively, were carried out to improve the removal performance of PB. The results of their Cr (VI removal performances are pH dependent. The adsorption data could be well interpreted by the Langmuir, Freundlich, and Flory-Huggins isotherm models. The maximum adsorption capacity obtained from the Langmuir model for the chitosan coated oxidized palm branches is 55 mg/mg. The adsorption process could be described by pseudo-second-order kinetic model. The intraparticle diffusion study revealed that film diffusion might be involved. The biosorbents were successfully regenerated using 1 M HCL solution.

  14. Development studies for a novel wet oxidation process

    International Nuclear Information System (INIS)

    A catalytic wet oxidation process (DETOX), which uses an acidic iron solution to oxidize organic compounds to carbon dioxide, water, and other simple products, was investigated as a potential method for the treatment of multicomponent hazardous and mixed wastes. The organic compounds picric acid, poly(vinyl chloride), tetrachlorothiophene, pentachloropyridine, Aroclor 1260 (a polychlorinated biphenyl), and hexachlorobenzene were oxidized in 125 ml reaction vessels. The metals arsenic, barium, beryllium, cadmium, cerium (as a surrogate for plutonium), chromium, lead, mercury, neodymium (as a surrogate for uranium), nickel, and vanadium were tested in the DETOX solution. Barium, beryllium, cerium, chromium, mercury, neodymium, nickel, and vanadium were all found to be very soluble (>100 g/l) in the DETOX chloride-based solution. Arsenic, barium, cadmium, and lead solubilities were lower. Lead could be selectively precipitated from the DETOX solution. Chromium(VI) was reduced to relatively non-toxic chromium(III) by the solution. Six soils were contaminated with arsenic, barium, beryllium, chromium, lead, and neodymium oxides at approximately 0.1% by weight, and benzene, trichloroethene, mineral oil, and Aroclor 1260 at approximately 5% by weight total, and 5.g amounts treated with the DETOX solution in unstirred 125. ml reaction bombs. It is felt that soil treatment in a properly designed system is entirely possible despite incomplete oxidation of the less volatile organic materials in these unstirred tests

  15. Development studies for a novel wet oxidation process

    Energy Technology Data Exchange (ETDEWEB)

    Dhooge, P.M.; Hakim, L.B.

    1994-01-01

    A catalytic wet oxidation process (DETOX), which uses an acidic iron solution to oxidize organic compounds to carbon dioxide, water, and other simple products, was investigated as a potential method for the treatment of multicomponent hazardous and mixed wastes. The organic compounds picric acid, poly(vinyl chloride), tetrachlorothiophene, pentachloropyridine, Aroclor 1260 (a polychlorinated biphenyl), and hexachlorobenzene were oxidized in 125 ml reaction vessels. The metals arsenic, barium, beryllium, cadmium, cerium (as a surrogate for plutonium), chromium, lead, mercury, neodymium (as a surrogate for uranium), nickel, and vanadium were tested in the DETOX solution. Barium, beryllium, cerium, chromium, mercury, neodymium, nickel, and vanadium were all found to be very soluble (>100 g/l) in the DETOX chloride-based solution. Arsenic, barium, cadmium, and lead solubilities were lower. Lead could be selectively precipitated from the DETOX solution. Chromium(VI) was reduced to relatively non-toxic chromium(III) by the solution. Six soils were contaminated with arsenic, barium, beryllium, chromium, lead, and neodymium oxides at approximately 0.1% by weight, and benzene, trichloroethene, mineral oil, and Aroclor 1260 at approximately 5% by weight total, and 5.g amounts treated with the DETOX solution in unstirred 125. ml reaction bombs. It is felt that soil treatment in a properly designed system is entirely possible despite incomplete oxidation of the less volatile organic materials in these unstirred tests.

  16. 40 CFR Appendix Xii to Part 266 - Nickel or Chromium-Bearing Materials that may be Processed in Exempt Nickel-Chromium Recovery...

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 26 2010-07-01 2010-07-01 false Nickel or Chromium-Bearing Materials that may be Processed in Exempt Nickel-Chromium Recovery Furnaces XII Appendix XII to Part 266... FACILITIES Pt. 266, App. XII Appendix XII to Part 266—Nickel or Chromium-Bearing Materials that may...

  17. Investigation on steam oxidation behaviour of TP347H FG Part I Exposure at 256 bar

    DEFF Research Database (Denmark)

    Jianmin, J; Montgomery, Melanie; Larsen, OH;

    2005-01-01

    The stainless steel TP347H FG is a candidate material for the final stage tubing of superheater and reheater sections of ultra supercritical boilers operated at steam temperatures up to 620C in the mild corrosion environments of coal-firing. A series of field tests has been conducted with the...... oxide, where the outer layer consists of two sub-layers, an iron oxide layer and an iron-nickel oxide layer; the inner layer is chromium rich chromium-iron-nickel oxide. Microstructure examination showed that for all these samples the varying grain size of subsurface metal affected the oxide thickness...

  18. Evaluating trivalent chromium toxicity on wild terrestrial and wetland plants.

    Science.gov (United States)

    Lukina, A O; Boutin, C; Rowland, O; Carpenter, D J

    2016-11-01

    Elevated chromium levels in soil from mining can impact the environment, including plants. Mining of chromium is concentrated in South Africa, several Asian countries, and potentially in Northern Ontario, Canada, raising concerns since chromium toxicity to wild plants is poorly understood. In the first experiment, concentration-response tests were conducted to evaluate effects of chromium on terrestrial and wetland plants. Following established guidelines using artificial soil, seeds of 32 species were exposed to chromium (Cr(3+)) at concentrations simulating contamination (0-1000 mg kg(-1)). This study found that low levels of chromium (250 mg kg(-1)) adversely affected the germination of 22% of species (33% of all families), while higher levels (500 and 1000 mg kg(-1)) affected 69% and 94% of species, respectively, from 89% of the families. Secondly, effects on seedbanks were studied using soil collected in Northern Ontario and exposed to Cr(3+) at equivalent concentrations (0-1000 mg kg(-1)). Effects were less severe in the seedbank study with significant differences only observed at 1000 mg kg(-1). Seeds exposed to Cr(3+) during stratification were greatly affected. Seed size was a contributing factor as was possibly the seed coat barrier. This study represents an initial step in understanding Cr(3+) toxicity on wild plants and could form the basis for future risk assessments. PMID:27543852

  19. Wear resistance of chromium cast iron – research and application

    Directory of Open Access Journals (Sweden)

    A. Studnicki

    2006-04-01

    Full Text Available Purpose: A short characteristic of wear resistance chromium cast iron has been presented as well as possibilities of this material researches realization in Foundry Department have been discussed.Design/methodology/approach: Main attention was given on research process of crystallization and analysis of chromium cast iron microstructure and its resistance on erosion wears. Separate part of paper was devoted to discuss the bimetallic castings with chromium cast iron layer as well as typical applications of chromium cast iron castings in minig, proccesing, metallurgical and power industry.Findings: The new method of crystallization process research with three testers (DTA-K3 was found in the work. The method makes possible to characterize sensitivity of chromium cast iron on cooling kinetic.Research limitations/implications: DTA-K3 method can be used for research of crystallization proccess of cast materials particularly for abrasion-resisting alloy.Practical implications: Wide scope researches of chromium cast iron in Foundry Department enable extending applications its material in many industries.Originality/value: Value of the paper is the presentation of researches possibilities which undertaken in Foundry Department within the range of wear resistant materials.

  20. Experimental skin deposition of chromium on the hands following handling of samples of leather and metal

    DEFF Research Database (Denmark)

    Bregnbak, David; Thyssen, Jacob P.; Jellesen, Morten Stendahl;

    2016-01-01

    Background: Chromium is an important skin sensitizer. Exposure to it has been regulated in cement, and recently in leather. Studies on the deposition of chromium ions on the skin as a result of handling different chromium-containing materials are sparse, but could improve the risk assessment of...... contact sensitization and allergic contact dermatitis caused by chromium. Objectives: To determine whether the handling of chromium-containing samples of leather and metal results in the deposition of chromium onto the skin. Methods: Five healthy volunteers participated. For 30 min, they handled samples...... of leather and metal known to contain and release chromium. Skin deposition of chromium was assessed with the acid wipe sampling technique. Results: Acid wipe sampling of the participants' fingers showed chromium deposition on the skin in all participants who had been exposed to leather (range 0...