WorldWideScience

Sample records for chosa hokokusho kankyo

  1. Fiscal 1995 geothermal development promotion survey. Natural environment survey report; 1995 nendo chinetsu kaihatsu sokushin chosa. Shizen kankyo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    In Candidate C area for the geothermal development survey, the natural environment was surveyed and `the secondary landscape assessment` was summed up in which places proposed for drilling of large-size wells and for construction of power generation facilities are extracted and a simulation of the landscape is conducted. The area for survey is the Shiramizu-gawa region in the south of Lake Akan, Akan-cho, Akan-gun, Hokkaido. The field survey was carried out about three items of landscape, plants and animals during the June-November period, 1995. As to the flora, diverse florae including vegetation unique to alpine areas, wetlands, and fumarole surrounding areas were found in the region, which is covered with summer-green broad-leaved forests or mixed forests of coniferous and broad-leaved trees. As to the fauna, faunae inhabitant of the highly natural forests were found including black woodpeckers and mountain hawk eagles. As a result of studying the places proposed for geothermal development from the above-mentioned survey, two places were picked up in the west of the survey area, where geothermal development is comparatively less influential in the natural environment and landscape and there is a high locational adaptability. 19 refs., 56 figs., 49 tabs.

  2. Research report. Environmentally friendly energy community research business for Yumesu district, Osaka Port; Osakawan Yumesu chiku kankyo chowagata energy community chosa jigyo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A study is conducted on an energy supply infrastructure for introducing a cogeneration system into the Yumesu district, which is a key point for the development of Osaka City, so that environments suitable for the 21st century will be formed and sustained. In the study, plural heat supply systems are discussed for the district. Taken up also are the possible utilization of heat from the waste incineration plant to be constructed on the neighboring Maisu island and of hitherto-unexploited energy sources such as seawater and the sewage treatment plant whose construction is now under consideration. Findings are that every method under study achieves an energy-saving rate of 5% and that the introduction of an urban type power plant will obtain the best result marking an approximately 22% energy-saving rate when its exhaust heat is effectively utilized. The order remains the same when their environmental features are surveyed, with the urban type cogeneration system holding first place with a NOx reduction rate of 37.7%. When it comes to economy, however, the method of effectively utilizing the exhaust heat from cogeneration power plants installed at consumers' marks the best result, this attributed to the low cost of pipe laying in the district. (NEDO)

  3. Research report. Environmentally friendly energy community research business (Minami-guchi District, Sapporo Railway Station); Sapporoeki minamiguchi chiku chosa hokokusho. Kankyo chowagata energy community chosa jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Feasibility of commercialization is discussed of an environmentally friendly heat supply system for the above-named district. The research centers on the configuration and optimum dimensions of heat source equipment for a large-scale cogeneration-aided district heat supply system to be selected for introduction into the district. Discussion is made about the energy efficiency and environment preserving features of a system selected for employment. A study is then conducted on a plant consisting of two high-efficiency 4800kW gas turbine cogeneration systems and heat storing water tanks. Such when introduced will contribute to the levelling-off of urban power loads and to the enhancement of power peak cut through the utilization of cogeneration system-generated power and midnight power. When the exhaust heat from the cogeneration system is fully exploited, the system will achieve an energy saving effect approximately 9% higher than that exhibited by separately functioning heat source systems. Furthermore, CO2 will be reduced by 20% or more, NOx by 45% or more, and SOx by 46% or more, as compared with separately functioning heat source systems. The conclusive evaluation is that the above-selected system will sufficiently contribute to the preservation of environments. (NEDO)

  4. Fiscal 1997 survey report. Feasibility study of the environmentally friendly type coal utilization system (survey of the coal utilization in Pakistan); 1997 nendo chosa hokokusho. Kankyo chowagata sekitan riyo system kanosei chosa (Pakistan ni okeru sekitan riyo gaikyo chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper made a literature survey, hearing survey, site survey/study on the coal in Pakistan such as the coal utilization system and the environmental situation, etc., and aimed at pre-examination for the survey of the introduction of the environmentally friendly type coal utilization system to be planned in Pakistan in the future. The examination, data collection and preparation were conducted in terms of the following items: the structure of coal consumption in energy supply, structure of coal consumption, mainly of domestic brown coal consumption, the situation of coal utilization by industry and by region, environmental problems caused by coal utilization such as air pollution, the trend of policies of environmental regulation, etc. The literature on the following was obtained and surveyed: the situation of economy/energy in Pakistan, coal utilization technology by industrial field, and environmental protection technology. The hearing survey was made to institutions concerned, corporation groups and men of learning and experience. Site surveys were conducted for the typically selected coal utilization equipment and existing environmental protection equipment. 66 figs., 56 tabs.

  5. Survey report on an environmental harmony type production system of chemical products; Kankyo chowagata kagaku seihin seizo system ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    As part of establishing an environmental harmony type production system of chemical products, study and survey were made on PET bottles. Using the life cycle analysis method (LCA), a study was made for proposing a material recycle (MR) method which is environmentally and economically excellent in the stage of recycling waste PET bottles. The total cost of recycling can be reduced by 34% supported by a decrease in equipment cost and improvement in yield if there is no mixture of foreign substances such as aluminum caps and PVC bottles. However, the ratio of the amount obtained from the reduction to the total production cost is small, and it is necessary to take measures from a viewpoint of the cost in a total production process and environmental loads. In a survey in Kawaguchi city, PET bottles discharged from the business sector occupied 41% of all the discharge amount. In a survey in Yokohama city, very important data were obtained on PET bottles appointed as the second type under the recycle law. The quality of PET bottles to be brought to the recycling plant is important for effectively processing PET bottles in MR method. For achievement of MR which is low in cost and small in environmental load, needed were cooperation by citizens, the shipping management system in autonomous government, and changes in design and material quality to be made by the industrial circle. 8 refs., 64 figs., 68 tabs.

  6. Fiscal 1994 survey report. Survey of energy supply/demand structure sophistication and global environmental impact; 1994 nendo energy jukyu kozo kodoka chikyu kankyo eikyo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    Outlines of various energy supply/demand analytical models are surveyed. With environmental problems gathering importance, a number of models are being introduced in which energy supply/demand structures, long-term climate changes, and impacts of policy options on social economy are linked to each other. Some socioeconomic impact models cover a single country and others the whole world. They are various in type, ranging from dynamic optimization models to static balance models. Twenty-four models are chosen, and grouped into two types respectively covering Japan and the whole world from a geographical viewpoint and into three groups in view of their structures. Under an optimization model, such optimization is accomplished as economic growth maximization and energy cost minimization and so forth under given energy supply restrictions. Under a general balance type econometric model, an adjustment process in which capital and labor and production are coordinated across multiple departments is expressly stated. Under a partial balance type econometric model, a demand function for goods is given and optimum behavior such as consumption maximization is indirectly described. (NEDO)

  7. Research report of fiscal 1997. Survey on information networks for environment technology transfer; 1997 nendo hokokusho. Kankyo gijutsu iten joho network chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    ICETT is one of the member organizations of APEC environment technology virtual center which established in Osaka in 1996 for active environment technology exchange between APEC countries based on a survey result obtained in fiscal 1995. ICETT began its information service in April, 1997, and completed useful prototype home pages which include the database composed of practical useful information on environment preservation technology of domestic factories and offices, and training information and local governments` approach cases to pollution control. In fiscal 1997, further survey was made, and the simulation software of a model process was also developed for training. Clean technology and energy saving technology strongly demanded by developing countries were surveyed to prepare a database including useful information for developing countries. A basic design software for bio-treatment of waste water was also prepared. The total number of home page accesses exceeded a predicted number for the first half year. 5 refs., 25 figs.

  8. Report on the survey in fiscal 1998. Survey on an environment technology transfer information network; 1998 nendo hokokusho. Kankyo gijutsu iten joho network chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This paper describes a survey on an environment technology transfer information network. Based on the achievements obtained by the surveys in fiscal 1995 and 1996, the ICETT has participated as one organization constituting the APEC environment technology exchange virtual center, and begun providing information since April 1997. As the environment technology information, those items actually employed by factories and operation sites in Japan are put into a data base, and into a home page including training information centering around those contained in the data base, and examples of works done by local governments for prevention of pollution. Furthermore in fiscal 1997, a simulation software for a model process has been developed. Fiscal 1998 strengthened the data base for environment preservation technology information, investigated environment preserving model companies and summarized them including even their management aspect. Investigations were carried out in developing countries on application of cleaner technologies. Gaps far exceeding anticipation exist in every field between these developing countries and Japan. Environment protection measures applied and succeeded in the developing countries as the means to narrow the gaps were collected, and compiled as the specific examples. (NEDO)

  9. Survey report of FY 1997 on the feasibility of microbial biotechnology for reuse of environmental pollutants; 1997 nendo chosa hokokusho (kankyo osen busshitsu no shigenka no tame no biseibutsu bio technology no riyo kanosei chi kansuru chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    An investigation was conducted with the aim of elucidating the foundations for effective utilization of environmental pollutants or unused resources which are likely to be causal substances of environmental pollutants, as resources, using biotechnology. Composting of agricultural waste, production of microbial mycelium proteins and microbial fermentation materials were suggested as main examples of effective utilization of unused resources by microorganisms. Selection of active microorganisms in the livestock waste, clarification of the mechanism of action and the establishment of treatment conditions are essential to new developments in this field. In the field of marine products industry, it was pointed out that the recycling of waste using microorganisms and enzyme treatment is the most promising approach to the effective utilization of resources. In the field of food industry, applications as the culture media for mushrooms, for enzyme production and for the production of physiologically active materials as well as fuel were clarified. Was also pointed out the significance of studies on the microorganisms and enzymes in resources containing cellulose, hemicellulose and lignin, and the waste from these resources, lignocellulose. Were also proposed the composting of household waste, methane fermentation, and fermentative production of organic acid and hydrogen from waste. Possibility and significance of fermentative production of organic acid from sewage sludge were suggested. 314 refs., 46 figs., 33 tabs.

  10. Fiscal 1997 report on the survey of effects of enhancement of energy consumption efficiency on the global environment; 1997 nendo chosa hokokusho (energy shohi koritsuka chikyu kankyo eikyo chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper surveyed the state of studying the measures against global warming in the third assessment report of the Intergovernmental Panel on Climate Change (IPCC) and made analyses of the trends of preventive measures for global warming in other countries, aiming at presenting data for studying the future enhancement of energy consumption efficiency in the Asia Pacific region. In the U.S., a report was taken up from Executive Office of the President which is entitled `the federal government R and D of energy for solution to problems in the 21st century.` The report made analyses of the federal government R and D of energy and at the same time recommended an increase in R and D budget and reinforcement of the organization of the Department of Energy. In Europe, the carbon tax, CO2 tax, energy tax, etc. are introduced or studied for reduction of CO2 emissions. OECD made public a report approved in May 1997 which is entitled `the environmental tax and green tax reform.` Also studied were the introduction and effects of the carbon tax aiming at reducing CO2 emissions in developing countries. More attention is being paid to economic effects predicted in case developed countries reinforce various kinds of measures for targeted reduction of greenhouse gases. 2 figs., 4 tabs.

  11. FY 1998 geothermal development promotion survey. Report on the environmental effect survey (No. A-4 Kunbetsu-dake area); 1998 nendo chinetsu kaihatsu sokushin chosa. Kankyo eikyo chosa hokokusho (No.A-4 Kunbetsudake chiiki)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-09-30

    Of the FY 1998 geothermal development promotion survey, the primary environmental effect survey in the Kunbetsu-dake area was conducted, and the results were arranged. In the well drilling survey, etc., the survey was made aiming at extracting areas to be preserved from an environmental aspect. The results of the survey were summarized as follows: As to the mammalia, 12 families 46 species were confirmed in the area surveyed and the periphery by literature survey. Out of them, the noticeable species which are considered important from an academic viewpoint are 10 families 19 species. As to the aves, 55 families 340 species were confirmed, of which 29 families 79 species are noticeable species. About the amphibia/reptilia, 3 families 3 species in the amphibia and 4 families 6 species in the reptilia were confirmed by literature and hearing survey. The noticeable species is 1 family 1 species in the amphilia. Concerning the terrestrial insecta, 135 families 873 species were confirmed, and the noticeable species is 11 families 20 species. As to the flora, 115 families 1055 species were confirmed, and the noticeable species is 46 families 126 species. Relating to the living vegetation, the one higher than 9 in nature reserves shows a substantial rate, and the periphery of Kaibetsu-dake is designated as the specified flora colony. (NEDO)

  12. Survey report on the environment harmonizing type energy community survey project for the Izumizawa area in Chitose City; Chitoseshi Izumizawa chiku kankyo chowagata energy community chosa jigyo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A large-scale cogeneration system will be introduced into the air-front industrial complex in the Izumizawa area having large energy demand within the city of Chitose well blessed with natural environment. The system will utilize natural gas locally produced in the Tomakomai Yubarai area (the utilization produces 20% reduction effect of carbon dioxide emission even only from conversion from petroleum oil). At the same time, heat supply operation will be carried out meeting the heat demand in diversified consumer applications, such as air conditioning of ancillary facilities, hot water supply, hot bathing facilities, and snow melting. Business feasibility has been investigated and discussed. Discussions were given on gas engine, gas turbine, combined cycle, and steam jetting systems. Although the combined system was found most superior, other cases present no large difference excepting the turbine system. The system is a highly efficient energy saving facility (annually saving 3000 kiloliters of crude oil, worth for annual kerosene consumption by 1500 ordinary households in Hokkaido). It can largely reduce emission of carbon dioxide. Each case has large economic effect with the simply calculated number of years of return of investment being six to eight years. (NEDO)

  13. FY 1997 report on the research for construction of NEDO`s vision. Regional environment and international collaboration; 1997 nendo chosa hokokusho (NEDO vision sakutei ni muketa chosa kenkyu). Chiiki kankyo to kokusai kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    It is necessary for NEDO to transfer the energy technology to developing countries and conduct collaborations with them efficiently. First of all, environments of the community were analyzed from a viewpoint of natural environment, social and cultural environment, and industrial and economic environment. Then, this report outlines the organizations of domestic and international aid agencies which have potentials to conduct alliance and collaboration with NEDO, and also illustrates their activities including financing and technology exchange, regional activities, and progress of activities. Alliances and collaborations with NGOs of each international organization were analyzed on the aspect of the fields and know-how of alliance with NGOs, selection standards of NGOs and necessary systems and organizations to make effective alliance and collaboration with NGOs, and some case studies were taken. Organization, purposes and activities of NGOs in Asian countries are introduced, and their current situations are illustrated. Finally, some proposals were offered to make alliances and collaborations with aid agencies and NGOs. They are concerned about the fields and know-how of alliance with NGOs, selection standards of NGOs and necessary systems and organizations to make effective alliance and collaboration with NGOs. 44 figs., 8 tabs.

  14. Survey report on the environment harmonizing type energy community survey project for the coastal area in the Kawasaki ward in fiscal 1998; 1998 nendo Kawasakiku rinkaibu chiiki kankyo chowagata energy community chosa jigyo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    In energy utilization in the 'Kawasaki Zero Emission Industrial Complex', optimal regional heat supply systems were discussed. The discussion was made from the viewpoints of introduction of saving-type energies, new energies and renewable energies, and environment preservation performance. The coastal area in the Kawasaki ward is planned of developing an industrial complex with an area of 8.4 ha for operation of about twenty companies. In the assumption of heat demand, four companies only were taken up as the object of the discussion, who utilize heat supply from steam as process heat source for their factories. The total heat demand quantity and heat demand pattern used for the discussion were assumed by hearing and actual record submitted from each company. Optimal systems were discussed on heat supply systems utilizing steam produced by steel mills, with the discussion made on waste heat recovered steam in processes and steam extracted from thermal electric power plants in the steel mills. As a result of the discussion, heat supply utilizing the steel mill steam was found capable of being provided with much lower price level as the estimated unit price than general direct steam supply, leading to a judgement that the system has business feasibility. (NEDO)

  15. Fiscal 1997 feasibility survey of an environment friendly type coal utilization system. Feasibility survey of the environment friendly type coal utilization system in Malaysia and Vietnam (case of Vietnam); 1997 nendo chosa hokokusho. Kankyo chowagata sekitan riyo system kanosei chosa (Malaysia oyobi Vietnam ni okeru kankyo chowagata sekitan riyo system kanosei chosa (Vietnam ban))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper grasped the state of coal utilization by coal consumption field, the state of coal physical flow in Vietnam, etc., surveyed/studied a possibility of introducing the environment friendly type coal utilization system, and assessed the possibility. As to energy resources, the north is abundant in hydroelectric and coal (mainly anthracite) resources, and the south in oil and natural gas resources. Coal production in fiscal 1997 is planned to be 10 million tons. Coal preparation technique presently available is only grain size sieving. Accordingly, it is necessary to study for heightening efficiency of facilities and modernizing facilities in accordance with the introduction of the environment friendly type coal utilization technology. During the study, it is possible to propose improvement on coal processing technology (coal preparation technology). Assessment and study are made especially of the coal selection system, fine coal recovery system and waste water treatment system. For the plan on new coal-fired power plants (300MWtimes4), there is left much necessity of proposing studying models considered of the anthracite combustion technology and environmental improvement and of assessing/studying them. 60 figs., 117 tabs.

  16. Fiscal 1997 survey report. Feasibility study of the environmentally friendly type coal utilization system (feasibility study of the environmentally friendly type coal utilization system in India); 1997 nendo chosa hokokusho. Kankyo chowagata sekitan riyo system kanosei chosa (Indo ni okeru kankyo chowagata sekitan riyo system kanosei chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The survey was conducted of the present situation of coal utilization and the present coal situation such as the environmental state of India which is a coal producing/consuming country next to China in Asia. The paper studied a feasibility of the introduction of the environmental friendly type coal utilization system` to be planned in India. The items for survey are the present situation of economy and energy and the future trend, environmental problems on coal utilization, the present status of the coal distribution system and study subjects, the present status of coal utilization by field and study subjects, a possibility of briquette use, a possibility of coal fluidization, electric power development plans and coal combustion technology in each industry, etc. The subjects are the obligation of coal preparation to coal thermal power plants 1000 km away from coal mines starting 2001, measures taken for effective ash use, measures taken for superannuated gas furnaces, etc. Based on the results of these site surveys and reports of the investigation under consignment from CMPDI, the paper studied/analyzed possibilities of introducing the coal utilization system having actual introduction results in Japan to India, and made an investigational report. 39 refs., 12 figs., 56 tabs.

  17. Research report of FY 1997 on the environmentally acceptable coal utilization system feasibility survey. Environmentally acceptable coal utilization system feasibility survey in Malaysia and Vietnam (Malaysia); 1997 nendo chosa hokokusho. Kankyo chowagata sekitan riyo system kanosei chosa (Malaysia oyobi Vietnam ni okeru kankyo chowagata sekitan riyo system kanosei chosa (Malaysia ban))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In this survey, the coal utilization status in individual consumption sectors and coal distribution status in Malaysia are summarized as basic data for the introduction of environmentally acceptable coal utilization systems. In this fiscal year, the status of existing coal utilization technology and environmental issues in Malaysia are summarized as basic data for the introduction of above-mentioned systems on the basis of data and information collected by basic research and site survey in FY 1996. Malaysia is one of the rich countries producing the primary resources with crude petroleum, natural gas, hydro-power, and coal. The coal demand will be realized after saturating LNG development since 2000. The major coal consumption industries are power generation sector and cement industry sector. As expected increase in the future coal consumption, efficiency of coal utilization and environmental issues are problems in the future. Based on the FS results of this survey, the survey will be continued for planning and conducting the model project required from Malaysia. 8 figs., 34 tabs.

  18. Fiscal 1998 research report on the production of bio-affinity materials by using microgravity environment; Bisho juryoku kankyo riyo seitai shinwa zairyo no sosei kenkyu 1998 nendo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Experiment was made on production of bio-affinity materials under a microgravity condition by using the drop experiment facility of the underground a gravity experiment center. The experiment includes fast polymerization of polymer grains, protein orientation control and protein thin film formation, organic thin film formation, O/W emulsion preparation, and crystallization of protein under a microgravity condition. In polymerization of fine pyrrole grains under the existence of fine latex grains, production of fiber polypyrrole is remarkable, and fiber growth from latex surfaces was confirmed. The obtained thin bacteriorhodopsin film shows a photoelectric response, and as the AFM observation result, it is mainly composed of violet single-layer electrodeposited films. The wetting rise of acrylic monomer at the interface between solid and liquid is largely dependent on viscosity. The oil droplet size distribution of O/W emulsion is narrower than that in ground experiment, and is close to a normal distribution. Easy imaging of products was achieved by tracing cytochrome crystals with change in turbidity. The crystallization phase diagram of black mold acid protease A, and basic data in crystallization process were obtained. (NEDO)

  19. Fiscal 1998 research report. Study on the feasibility of microorganism biotechnology for effective use of environmental pollutants. Pt. 2; 1998 nendochosa hokokusho. Kankyo osen busshitsu no shigenka no tame no biseibutsu bio technology riyo kanosei ni kansuru chosa. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Study was made on the feasibility of microorganism biotechnology for effective use of environmental pollutants and unused resources. Microorganisms and microorganism enzymes for decomposing lignocellulose were viewed, and uses of hydrolysis products were summarized. Production of microorganisms applicable to fodder, composting, and production of energy sources (methane, hydrogen, ethanol) were studied. Use of vegetable fiber residues such as beer lees as fungus cultivation medium and conversion to valuable substances were also studied. Microorganisms treatment (MT) of wastes in fats and oils industry was summarized. Effective use of MT of protein waste from marine products was studied. MT of manures with the greatest impact on environment as livestock waste was summarized. The necessity of separate collection of domestic wastes, and composting and methane fermentation of kitchen garbage were reported. The feasibility of MT of plastic wastes, and decomposition of halogenated methane with high toxicity were also studied. (NEDO)

  20. FY 1999 report on the results of the survey of the utilization of knowledge management technology to NEDO's information system infrastructure; 1999 nendo NEDO knowledge management kankyo no kochiku chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the purpose of exercising the integrated management of various kinds of information produced by NEDO as intellectual assets and of making a plan, evaluation, spread/promotion, etc. of effective/efficient research and development, survey was conducted. As a result of the survey, the following were pointed out: The circulation and reutilization of electronic information are not promoted and the productivity is low because there is not much cooperation between the electronic information (documents) and the application conducting the making/distribution/keeping of the information under the present circumstances; PDF of NEDO's achievement reports costs a lot because there is no cooperation between internal documents and WWW documents. As the future course, the following were indicated: adoption of the Internet standard technology to the application handling the electronic information for compatibility; introduction of the application to make/manage WWW contents, groupware, intranet, etc. for integration of end user application; making each phase of formation/distribution/keeping of the electronic information compatible including the format study of NEDO's achievement reports. (NEDO)

  1. FY1998 Report of surveys on network possibility involved with proliferation and transfer of environmental technologies (Europe, Australia and New Zealand); 1998 nendo kankyo gijutsu no fukyu iten ni kakawaru network kanosei chosa hokokusho . Oshu Goshu New Zealand

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    At the third Conference of the Parties to the United Nations Framework Convention for Climate Change (COP3) held in December 1997, the industrialized nations have agreed on development and proliferation of innovative technologies under international cooperation and transfer of environmental technologies to developing countries by expanding and strengthening CTI being the framework to be progressed spontaneously. Under the international strategic research project for global environment, NEDO has been promoting positively the research and development, whose support is urged to be expanded further in the future upon receiving the present agreement. Therefore, NEDO has performed the present survey in order to propose frameworks and measures for strengthening and expanding CTI. From among the policies and measures to be taken by the related countries based on the COP3 protocol, fiscal 1997 has performed review and new establishment of plans involved with execution of the items related to technology development, and surveys on action movements such as review and expansion of the measures, as the first stage. Fiscal 1998 has executed surveys focusing on the network for technology proliferation and transfer to developing countries as the second stage. (NEDO)

  2. Survey report of FY 1997 on the global environmental industry technology development promotion project. International research exchange project; 1997 nendo chosa hokokusho. Chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo (kokusai kenkyu koryu jigyo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Exchange of personnel among foreign research organizations is significant for promoting research and development to create new research fields and to build new technological systems for the purpose of solving global environmental problems. For this purpose, researchers were sent/invited to/from international conferences and international symposiums related to global environmental technology and exchange of personnel with major foreign research organizations and universities was conducted under the cooperation of RITE and RITE-related researchers and related academic societies. Based on short-term invitation and sending of researchers as well as the feasibility study of researcher exchange, researchers were sent/invited on long- and mid-terms. As a result, exchange of personnel engaged in the latest research in Japan and overseas could be promoted. It was found that various researches are being conducted abroad in basic areas of global environmental technology. Since they are closely related to the research and development of industrial technology contributing to global environmental preservation promoted by RITE, it is important to establish a more efficient exchange system of researchers in the future. 91 refs., 38 figs., 14 tabs.

  3. FY 1998 geothermal development promotion survey. Report on the environmental effect survey (hot spring/water level/spring water, No. C-3 Akinomiya area); 1998 nendo chinetsu kaihatsu sokushin chosa. Kankyo eikyo chosa hokokusho (onsen suii yusui, No.C-3 Akinomiya chiiki)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-04-01

    As a part of the FY 1998 geothermal development promotion survey, the results were summed up of the environmental effect survey conducted at the Akinomiya area of Ogachi-gun, Akita prefecture. In the survey, the drilling of N9-AY-4 exploration well and short-term injection tests of N8-AY-2/N9-AY-3 were carried out in the area. The survey was made aiming at grasping the effects on hot spring/ground water level/spring water in the area. The methods used for survey were surveys of hot spring variation, ground water level variation, precipitation, rivers, all spring sources, and analyses of hot spring water/spring water in the Akinomiya area. As a result of the survey, in hot spring/ground water level/spring water, no variations were recognized which were caused by the drilling of N9-AY-3/N9-AY-4/N9-AY-5 exploration wells and short-term injection tests of N8-AY-2/N9-AY-3 exploration wells. Moreover, since few changes of spring water quality were seen also in the result of the survey of all spring sources, it was judged that the drilling and short-term injection tests of the exploration wells described above have no effects on the hot spring, ground water level and spring water in the Akinomiya area. (NEDO)

  4. Report on a project to support promotion of forming an environmentally friendly energy community. Survey on business feasibility of electric power generation utilizing combustible wastes solidified fuel in the Kishu and Kumano living area; Kankyo chowagata energy community keisei sokushin hojo jigyo chosa hokokusho. Kishu Kumano seikatsuken'iki ni okeru kanensei haikibutsu kokeika nenryo riyo hatsuden jigyo no jigyoka kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Surveys and discussions were given on business feasibility of a wide area RDF power generation system in the Kishu and Kumano living area. The discussions dealt with as wide area as transcending prefectural borders and including the southern parts of Mie and Nara Prefectures with the city of Shingu as the central part. Wastes generation amount is estimated to be about 70,000 tons at the present as wastes that can be turned into RDF, and to be decreased to 67,000 tons in 2018. The manufactured RDF has calorific power of 3500 to 4500 kcal/kg, two to three times greater than that of wastes. The RDF manufacturing facilities installed in cities, towns and villages have capacity of 30 to 50 tons a day, with that in the city of Shingu being the largest at about 78 tons a day. Transportation can be implemented most efficiently when road transportation is used. The RDF power generation system will consist of a fluid bed furnace, a plasma type ash melting furnace, and a bag filter plus activated carbon absorbing tower. The RDF manufacturing cost will be 27,900 yen per ton of wastes in the case of the city of Shingu. In terms of business profitability, the RDF power generation must find sources to pay 21,400 yen per ton of RDF even if the power sale revenue is considered. (NEDO)

  5. Fiscal 1996 coal production/utilization technology promotion subsidy/clean coal technology promotion business/regional model survey. Study report on `Environmental load reduction measures: feasibility study of a coal utilization eco/energy supply system`; 1996 nendo sekitan seisan riyo gijutsu shinkohi hojokin clean coal technology suishin jigyo chiiki model chosa. `Kankyo fuka teigen taisaku sekitan riyo eko energy kyokyu system no kanosei chosa` chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Oil demand is expected to substantially grow in the future, and the use of oil with combustibles such as hull, baggase and waste is considered from an effective use of energy. A regional model survey was conducted as measures to reduce environmental loads where the fuel mixing combustion with coal and other energy is made the core. The domestic production amount of hull is 2.4-3.0 tons/year, which have a heating value of 3,500 kcal/kg. If hull can be formed into the one storable for a the long term (the one mixed with low grade coal, etc.), it can be a fuel for stable supply. Bagasse is produced 100 million tons/year, which have a heating value of 2,500 kcal/kg. Among wastes, waste tire, plastics, waste, sludge, etc. have a lot of problems in terms of price and environment, but each of them has a heating value during 3,000-10,000 kcal/kg. As to the coal combustion, the pollutional regulation on it is strict, and much higher processing technology is needed. The technology of coal fuel mixing combustion with other energy has not risen higher than the developmental level. Though the technology is a little bit higher in price than the coal fuel single combustion, it is viable. 38 refs., 32 figs., 65 tabs.

  6. Research report of FY 1997 on the environmentally acceptable coal utilization system feasibility survey. Clean coal technology model project seminar held in Thailand; 1997 nendo seika hokokusho. Kankyo chowagata sekitan riyo system kanosei chosa (Tai ni okeru clean coal technology model jigyo seminar no kaisai)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-02-01

    To reduce SOx with coal utilization, the desulfurization seminar diffusing the demonstration project of simplified desulfurizer introduction was held at the site in Thailand. The purpose is to reduce the environmental pollutants and contribute to the effective utilization of energy with coal utilization in Thailand. Invitation letters were sent to users of coal and heavy oil boilers through the Department of Factories, Ministry of Industry, Thailand, to call participation in the seminar. Inspection of the desulfurizer introduced in the factory of Thai Union Paper Public was included in the seminar for diffusing the project. The inspection site is in the demonstration project site of simplified desulfurizer introduction. There were a lot of participants from Thai users and from Japan. The seminar included the presentations from NEDO, JETRO, FTI, and MOSTE, introduction of general technology for processes of ENAA desulfurizer, introduction of demonstration unit plan by IHI, and introduction of operation of demonstration unit by TUP. 31 figs., 6 tabs.

  7. FY 2000 report on the basic survey to promote Joint Implementation, etc. Environmental improvement and energy conservation measures in Pakistan Steel, a state-run enterprise in Pakistan; 2000 nendo kyodo jisshi nado suishin kiso chosa hokokusho. Pakistan koku kokuei Pakistan Steel ni okeru kankyo kaizen sho energy taisaku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the state-run plant of Pakistan Steel in Pakistan, an investigational study was conducted on energy conservation and reduction in greenhouse effect gas emission. In the project, energy conservation technology on the following was tried to be introduced: coke oven coal moisture control (CMC) equipment, sintering cooler waste heat recovery equipment, blast furnace hot stove waste heat recovery equipment, blast furnace pulverized coal injection (PCI) equipment, blast furnace top pressure recovery turbine (TRT) equipment, and hot strip mill heating furnace regenerative type burner equipment. Further, in the project on environmental improvement, studies were made on coke oven environmental improvement and blast furnace cast house dust collection. The results of the study indicated that economical effects of the energy conservation project were considered as low because the unit price of energy of Pakistan Steel is low. However, substitution of the low-priced domestic coal for the imported coal has a good effect, and energy conservation in the TRT power generation and by the regenerative type burner produces a highly economical effect. Therefore, Pakistan Steel also agrees to positively promote the project. Moreover, concerning the environmental improvement project, it was considered that the necessity of the project is high in the relation of the coke oven aimed at reducing emissions of toxic substances. (NEDO)

  8. Fiscal 1999 report on basic research for promotion of joint implementation programs. Feasibility study on energy saving and environmental improvement for Radom City district cogeneration station; 1999 nendo Radom shi chiiki netsuden heikyu station sho energy oyobi kankyo kaizen kanosei chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Pursuant to the COP3 (Third Session of the Conference of the Parties to the United Nations Framework Convention on Climate Change) protocol, studies are conducted on a district cogeneration station for Radom City, Poland. Using the annual load pattern of heat supply, cogeneration will be built only for the amount that covers utilization factors not lower than a specified level, and the shortage in winter when the load is heavy due to demand for heat will be dealt with by the existing hot water boilers. Daily change in load is to be covered by a new, additional boiler which will bear 20% of the whole output. The system is a natural gas fired turbine cogenerator, and hot water is supplied by a waste heat recovery boiler. Cogeneration will cover 80% of the annual heat supply. As for heat supply capability, it is set at 72MWt with the additional boiler taken into account, and 35MWe is to be generated. Heat efficiency will increase to be higher than 80%, coal consumption will decrease, and 28,117 tons/year in terms of oil will be saved with the increase in natural gas consumption subtracted. CO2 reduction will also be as large as 206,000 tons/year, decreasing air pollutants. Provided that 4.336-billion yen for facilities are financed by Japan's environmental yen loan, Poland's National Fund, and Radom City's own fund, IRR (internal rate of return) on investment will be fairly good at 10% in 30 years of operation. Investment will be recovered in nine years and there is no problem in cash flow. (NEDO)

  9. Research report of FY 1997 on the environmentally acceptable coal utilization system introduction support project. Follow-up project on simplified desulfurizer introduction (Changshou Chemical Industry Main Works); 1997 nendo chosa hokokusho. Kankyo chowagata sekitan riyo system donyu shien jigyo (kan`i datsuryu setsubi ni kakawaru follow up jigyo) (Changshou kako sohei)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For the follow-up project, to promote the diffusion of results in the clean coal technology (CCT) model projects, experts of simplified desulfurizers were dispatched, to guide and advise for the operation of facilities introduced in these projects. The purpose of these projects is to diffuse the CCTs, and to support the promotion of the environmentally acceptable coal utilization system introduction support project. The operation record data are periodically sent from the sites, to analyze the performance. In addition, experts were dispatched to survey the operation conditions of facilities introduced in the model project. Conditions of absorber, mist eliminator, scaling in ducts, and machineries including pumps were inspected by the experts to provide some guidance and advice. The utilization of by-product gypsum was also surveyed by the experts dispatched at the sites. The gypsum samples obtained were analyzed to provide some advice about its utilization. The project in this fiscal year has been successfully progressed, and the situation of demonstration operation is satisfied. 32 figs., 5 tabs.

  10. Research report of FY 1997 on the environmentally acceptable coal utilization system introduction support project. Follow-up project on circulating fluidized bed boiler introduction (Calaca Batangas Thermal Power Station); 1997 nendo chosa hokokusho. Kankyo chowagata sekitan riyo system donyu shien jigyo (junkan ryudosho boiler ni kakawaru follow up jigyo (Calaca Batangas karyoku hatsudensho))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For the follow-up project, to promote the diffusion of results of the clean coal technology (CCT) model projects, experts of circulating fluidized bed boilers were dispatched, to guide and advise for the operation of facilities introduced in these projects. The purpose of these projects is to diffuse the CCTs, and to support the promotion of environmental measures. Some guidance and advice about operation processes, data processing, operation regulation, maintenance, and boiler maintenance works were provided to the Ministry of Energy and Electric Power Corporation of the Philippines. Semirara, Malangas, and Samar coals in the Philippines were used for the tests. The boiler facilities could be operated by Philippine operators themselves. Based on the guidance and advice about operation processes, combustion tests using various Philippine coals were also planned and conducted by themselves. The maintenance techniques were transferred to Philippine operators through the inspection, repair and advice. The Philippine side understood the technologies well, and the circulating fluidized bed boiler technology was independently educated in the Philippines. 23 figs., 16 tabs.

  11. Project to support promotion of forming an environmentally friendly energy community. Survey report on 'a survey on introduction of industrial wastes composite treatment and power generation system intended for the whole Kagoshima prefectural area'; Kankyo chowagata energy community keisei sokushin hojo jigyo. Kagoshimaken zenken'ikika wo taisho to shita haikibutsu fukugo shori hatsuden system no donyu chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    In order to reduce environmental load, such as suppression of dioxin generation in Kagoshima Prefecture having a large number of small cities, towns and villages, discussions were given on business feasibility of introducing a high-efficiency industrial wastes power generation system intended for the whole Kagoshima prefectural area. The discussions performed investigations on quantity of wastes generation by districts and kinds and the present treatment conditions, system designs, and optimization of business operation systems. Loads given to the environment in association with the system installation were also investigated (SOx, NOx and CO2 emission, and water quality contamination). The system incinerates and treats RDF, waste plastics and combustible wastes in a gasification melting furnace, and amount of dioxin in the waste gas and ash is reduced to below the regulation values. Quantity of heat obtained from the combustion is turned into high-temperature and high-pressure steam, which is utilized for power generation. As a result of the discussions on business profitability, the industrial wastes power generation system intended for the whole prefectural area was found sufficiently realizable if installed by the public organization and operated by private business organization. However, such mechanism as PFI is thought difficult in the range anticipated at the present time. (NEDO)

  12. Survey report on a regional new energy vision establishment in Ueki Township. Town of solar energy and energy conservation (vision to build the town by actively living and creating with environment); Uekimachi chiiki shin energy vision sakutei chosa hokokusho. Taiyo energy to sho energy no machi (kankyo to sekkyokuteki ni kyosei kyososuru machizukuri vision)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Discussions were given on the new energy vision at Ueki Township in Kumamoto Prefecture. The total energy demand in Ueki Township is 898 x 10{sup 7} Kcal. of which about 44% is accounted for by the transportation department, 34.7% by the industrial department, and 21% by the consumer department. The total available regional new energy amount is estimated to be 52.1 x 10{sup 6} kWh/year, which is consisted of stockbreeding wastes energy at 44.1%, solar energy power generation at 33.2% and solar heat utilization at 22.6%. Introduction of wind energy was judged impracticable. The new energy introduction plan calls for introduction of solar energy power generation for lighting and air conditioning of the diamond shaped nursery school, the Yamamoto nursery school, the Ueki Township office building, the multi-purpose sports center, the Ueki Hospital operated by the national health insurance, the multi-purpose health and welfare center, Yoshimatsu Sports Park, and Tahara Sports Park. A subsidy institution by the local government was discussed as the proliferation plan of solar energy power generation systems to be installed in individuals' houses and enterprises, with which introduction to residential houses of about 30% was targeted by 2010. (NEDO)

  13. Survey on the information network for environmental technology transfer; Kankyo gijutsu iten joho network chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    In order to promote the interchange of environmental technologies mainly with developing countries (APEC countries), the concrete survey on construction of the information network for technology transfer was carried out. The useful information about environmental technologies for developing countries are not the latest Japanese information but actual field information in practical use which have been developed on the basis of constant improvements. Developing countries want clean technologies with less environmental burden, and difficult-to-obtain information for small and medium-sized businesses. Data were thus collected mainly in the Chubu district, and the information system was composed of an Internet server and in-house LAN. The system featured by easy retrieval and maintenance of the database was adopted. In addition, Internet connection environment and information needs in developing countries were surveyed. Expansion of the database and information supply, and constant addition of fresh information by continuous maintenance are essential in the future. 6 figs.

  14. Research report of fiscal 1997. Feasibility research on domestic wind farms; 1997 nendo chosa hokokusho. Kokunai wind farm kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Research was made on large-scale wind power generation projects under planning or construction. Issues of the following 5 areas were arranged considering topographic, geographic and meteorological conditions, and the type of municipal corporations: Tomamae town, Hokkaido, Tachikawa town, Yamagata prefecture (third-sector), Hisai city, Mie prefecture, Otoyo town, Kochi prefecture, and Kishuku town, Nagasaki prefecture (third-sector). These projects are supported by MITI`s local new energy introduction promotion project subsidy started in fiscal 1997 covering a half of construction cost (within 200 million yen/year). Requirements for this subsidy are that an applicant is either a municipal corporation or a third-sector, and that a total generating capacity is not less than 1200kW. Another subsidy system covering 1/3 of construction cost and a debt guarantee system are prepared for large-scale private projects not less than 800kW. Hearing was made on some private projects in Esashi town, Akita city and Hasaki town. Technical requirements, specifications, guideline and some examples for system interconnection are also summarized. 10 figs., 24 tabs.

  15. Fiscal 1997 report on a feasibility study of international joint researches in the Asian region; 1997 nendo chosa hokokusho (Asia chiiki kokusai kyodo kenkyu kanosei chosa (4)hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    It is thought that the energy consumption in Asian countries with ASEAN and China as center will a marked growth also in future together with a rapid economic growth, but harmony with environmental problems and economic growth is being taken as a serious problem. This is an important issue also to Japan from viewpoints of secure energy supply and regional response to the environmental issue. Accordingly, strongly desired is positive response to global environmental issues and promotion in development/spread of new energy/energy conservation in these countries. For the spread of the technologies, actual construction/operation of plants by joint researches with Japan are effective from aspects of personnel raising, technical improvement, PR effects, etc. This is also helpful for Japan in terms of technological development because Japan can also get the unobtainable data from the operation under appropriate conditions. This is a report on the studies of the trends of global environmental problems in Thailand, Indonesia, Malaysia, the Philippines, India and China. 3 figs., 72 tabs.

  16. Research report on human media; Human media no chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The human multimedia technology corresponding to users` subjective characteristics was researched to realize information environment producing a sense of unity with human. The human media technology realizes a human sensitive information processing model and a common database easily acceptable sensitively by various users. This technology also should be able to fairly accept and transmit individual`s information and knowledge as multimedia information, and in addition it is required to supply a virtual space with presence. In fiscal 1995, the research committee studied the concrete developmental issue for integrating these advanced fundamental technologies, and as practical images planned the prototype systems such as human media interactive plant operation, supply of environment supporting personal intelligent activities, and virtual medical center. The research committee also discussed development of space mobile media to secure energy-saving and safety of automobiles, and an environment simulation system with participation of many people. 34 figs., 2 tabs.

  17. Investigational report on the trend of measures for global warming; Chikyu ondanka taisaku doko chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    To know the trend of measures taken for global warming, conducted were overseas surveys, participation in academic society meetings, and literature surveys. The phaseout time of all ozone depleting substances responsible for the ozonospherial destruction was determined for both developed and developing countries in the 7th Meeting of countries which concluded the Montreal Protocol. As information on measures for protecting the ozonosphere, introduced was activities under United Nations Environment Programme (UNEP). New fluorine containing ethers were introduced as cleaning solvent which causes no ozonospherial destruction and is low in global warming index. Toxicity data were obtained on HFC-236ea and HFC-236fa which are promising substitutes in HCFC foaming and refrigerant fields. The paper introduced an outline of the 1st Meeting of countries which concluded the Framework Convention on Climate Change held in 1995. According to the report on the National Institute of Public Health and Environmental Protection of the Netherlands, the amount of emission of fluorine containing greenhouse effect gas (in CO2 conversion) reached 8-14% of all the amount of greenhouse effect gas emitted in 1990 unless the control is reinforced. An outline of the TEWI-3 project was introduced which is useful for comparing effects of substitution technologies on global warming. 14 refs., 11 figs., 29 tabs.

  18. Report on the analytical survey of the Pacific energy information; Taiheiyo energy joho bunseki chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Arrangement, investigation and analysis of an energy information exchange system were conducted, with the aim of coping with the development in the whole Asia/Pacific area, the stabilization of energy supply/demand, and the environmental problem and of realizing effective cooperation of every country in the area. Concerning the trend of the domestic primary energy supply/demand, there are some patterns. Countries which show high growth rates are developing countries such as Thailand and China, and NIES such as Korea and Taiwan. Countries where growth rates are slowing down and lowering are developed countries such as Australia, Canada, Japan and the U.S. Countries where energy supply/demand is not stabilized are Singapore, Hong Kong, Indonesia and Chile which are suffering from variations in import/export. The ultimate energy consumption is the domestic primary energy supply from which the conversion loss in the conversion sector was deducted, and indicates almost the same trend as the primary energy supply. It is divided into a stabilized type of developed countries and a rapidly increasing type and a stagnant type. However, there are some exceptions. Total data in the quarter of the year cannot be the yearly data by itself, but requires a year-end tax arrangement. 40 tabs.

  19. Report on an analytical survey on the Pacific energy information; Taiheiyo energy joho bunseki chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    For the purpose of collecting and arranging energy information in the Asia and Pacific region, this survey has been conducted for many fiscal years. The Asia and Pacific region is classified into the Chinese area, the Southeast Asia area including Brunei, Indonesia, the Philippine, Singapore and Thailand, the East Asia area including Japan, Korea, Taiwan and Hong Kong, the North America area including the U.S. and Canada, and the Oceania area including Australia and New Zealand. As to the primary energy supplied from 1980 to 1993, China largely increased its share by 3.1%. The Southeast Asia also increased its share by 2.1%, and the East Asia by 2.5%. To the contrary, the North America area largely declined its share by 7.8%, but still has approximately 60% in the Asia and Pacific area. By kind of energy, coal increased the share while oil decreased. 16 figs., 7 tabs.

  20. Feasibility survey of the environmentally-friendly coal utilization system. Feasibility survey of the environmentally-friendly coal utilization system in Indonesia; Kankyo chowagata sekitan riyo system kanosei chosa. Indonesia ni okeru kankyo chowagata sekitan riyo system kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    With relation to the coal of Indonesia, where the expansion of the use of coal as a substitute for petroleum/plant fuel is aimed at, the paper grasped the situation of coal production/distribution/utilization and environmental problems, and analyzed the situation of the coal utilization/spread by industry including the commercial/residential use. The purpose of the survey is to work out a comprehensive master plan including Japan`s international cooperation for introducing the environmentally-friendly coal utilization system to Indonesia. Coal utilization systems, the introduction of which Indonesia should study in future, were picked up, according to the surveys in fiscal 1993 and 1994. In commercial/residential and small-scale industry sectors, needed is improvement of carbonization technology for production of coal carbonization briquette. Moreover, the introduction of bio-briquette should be studied in the future. In the power generation sector, studies should be made on the introduction of technology for SOx/NOx reduction and technology for coal ash treatment including the effective use of coal ash. For the introduction of coal boilers, the combustion mixed with bagasse, which is abundant in amount, is also necessary. In the coal production sector, coal preparation technology is studied, and a method to select the optimum process was proposed through the simulation. 76 figs., 43 tabs.

  1. Investigations on international standardization of environmental management systems. 3; Kankyo kanri system no kokusai hyojunka ni kansuru chosa. 3

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Japan as an ISO member country identifies the state of discussions in the environmental management standard deliberation committee at ISO. Investigations were performed on international standardization of environmental management systems for the purpose of participating and cooperating in preparing and establishing international standards related to environmental management, and playing part in working, solving and improving environmental problems. Under the circumstances that environmental problems are drawing worldwide interest, the International Organization for Standardization (ISO) has been carrying out since 1993 deliberations on environmental management standards to institutionalize environmental management rules to check effects of business activities on the environment. The International Organization for Standardization/Environmental Management Technical Committee (ISO/TC207) was installed, at which series number of 1400 order was allotted for environmental management related standards, and major standards have come to a final stage of standard formulation at the TC207 Oslo conference in June 1995. In Japan, the Ministry of International Trade and Industry has established an environmental management standard deliberation committee composed of people of experience or academic standing to advance discussions on how the environmental management should be in business entities through deliberations on ISO standards.

  2. Research on environmental bioecosensing technology using ecological information; Seitaikei joho ni yoru kankyo bio eco sensing gijutsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The bioecosensing technology was studied which detects and identifies feeble signals generated by biosystem communication in wide biological environment. The following were reported as current notable environmental biosensing technologies: a quick measurement method of environmental contaminants using immunological measurement method, analysis method of ecological state of microorganism using DNA probes, observation of ecosystem by bioluminescent system, measurement method of environmental changes and contaminants using higher animals and plants, and detection method of chemical contaminants using chemotaxis of microorganism. As a result, the new bioecosensing/monitoring technology in molecular level was suggested for identifying comprehensive environmental changes which could not be measured by previous physical and chemical methods, as changes in ecosystem corresponding to environmental changes. As the wide area remote sensing technology of environmental ecological information, sensing technology on the earth, aircraft and satellite was also discussed. 247 refs., 55 figs., 17 tabs.

  3. Survey on bio-chemical complex harmonized with global environment. 3; Kankyo chowagata seibutsu kagaku konbinato ni kansuru chosa. 3

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    A survey was conducted of bio-chemical complex harmonized with the global environment for the purpose of constructing the material production process harmonized with the environment by the process fusion between biological conversion and chemical reaction. Palm oil was taken up as renewable raw material plant resource. The process utilizing bio-chemical reaction advances at normal temperature and pressure and is high in reaction specificity and selectivity. This is a recycling, circulation and environmental harmony type production technology which brings high yield, energy conservation, resource conservation, and low environmental loads. Waste water treatment and production of useful substances from sludge were thought as elementary technology. A possibility was studied of enzyme production by culturing solid waste, and the enzyme was applied to the hydrolysis process. The paper indicated trace components in the palm oil and the extraction method and proposed the production process of new derivatives for adding value to hydrolysate. A study was also made of the overall process flow which integrated these new processes and the material balance. The comprehensive evaluation of this new process was made from the aspect of the product structure, the market, construction cost, economical efficiency, and the environment. 133 refs., 65 figs., 56 tabs.

  4. Report on Asian Environment Information Network; 'Asia kankyo joho network' ni kansuru hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The goal is the construction of Asian Environment Information Network (AEInet) in accordance with a contract signed between Indonesia's LIPI (Indonesian Institute of Science) and NEDO under NEDO's Research Cooperation Project Concerning the Development of Environment Measuring Laser Radar (LR). The network is so designed and constituted as to operate on a private line between Indonesia and Japan via IP (Internet protocol) and to enable the exchange on the Internet network of the data collected/analyzed by the Indonesian LR system and of articles of e-mail between scientists of the two countries. The AEInet will be utilized for the collection/analysis of LR-collected data; exchange of observed data and the result of processing; provision of support to environment information scientists in exchanging e-mail and information; and the search of databases for the implementation of the project. In this paper, the outline and functions of the system, network system design, WWW server construction, network operating status, joint researches with Indonesia, etc., are described. (NEDO)

  5. Research report of fiscal 1997. Basic research on joint implementation for preventing global climate changes; 1998 nendo chosa hokokusho. Kyodo jisshi kiso chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Research was made to promote Activities Implemented Jointly Japan Program. Joint Implementation (JI) is the methodology for preventing global climate changes by collaboration of countries. The countries take cooperative actions for reduction, absorption and fixation of greenhouse gases, and effectively distribute the reduction credits among relevant parties. This was decided in the first session of the Conference of Parties (COP) held in March, 1995. In COP3, Japan`s assigned reduction amount in 2008-2012 was determined as 6% of the emission level in 1990. The protocol defines JI between parties as dealings of emission reduction units, and JI between developing countries as clean development mechanism. The rules for a base line and credit distribution are necessary before full-scale implementation. Although JI is regarded as an important cost-effective project, it is important to decide where and how the JI projects should been promoted. The present state and issues of the primary approved project of Japan Program are arranged. In particular, various terms related to developing countries remain to be solved. 21 figs., 32 tabs.

  6. Survey report on a new energy vision establishment in Gushikawa City (a survey on the initial phase); Gushikawashi chiiki shin energy vision sakutei chosa hokokusho (shoki dankai chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Discussions were given on the new energy vision at Gushikawa City in Okinawa Prefecture. The energy demand in Gushikawa City is estimated as 829.3 billion 73 million kcal, which is about half of the national average per population. By departments, the consumer department has a very large demand of about two times as much as the national average, while the demand in the industrial department is as low as about 38% of the national average. The energy demand by kind is in the order of electric power, gasoline and heavy oil. With respect to energy supply, the Okinawa Electric Power Company Gushikawa Power Plant supplies 561.60 billion kcal. The expected new energy availability is estimated as 47087 x 10{sup 3} kWh/year by solar energy power generation, 7174 x 10{sup 3} kWh/year by wind power generation, 1662 kWh/year by ocean wave power generation. Wastes energy availability is estimated as 74990 x 10{sup 6} kcal/year in the sum of general and stockbreeding wastes energy. Specific plans discussed introduction of solar energy power generation and small wind power generation systems to primary and middle schools, gymnasiums, urban area redevelopment projects, coastal parks, street lights, low-temperature warehouses, prefectural hospitals, and multi-purpose welfare centers. (NEDO)

  7. Fiscal 1998 research report. Survey on energy consumption in a residential sector; 1998 nendo chosa hokokusho. Minsei bumon energy shohi jittai chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    On energy consumption in a residential sector, the report reports the document survey result including new documents, and the result of the systematic national questionnaire survey carried out in small and medium cities to prepare the basic data for future development and introduction of petroleum substituting energy. The electric power consumption rate of detached houses (A) is larger by 0.6- 1.6Gcal/household/year than that of apartment houses (B) in every district. The gas consumption rate of A is smaller than that of B in Hokkaido, Kanto and Kyushu. The LPG consumption rate of Kinki district is largest in both A and B. The kerosene consumption rate of A is larger than that of B. In Hokkaido, the kerosene consumption is extremely large in heating, showing a ratio of 60% or more in A. In the other districts, the kerosene consumption is largest in hot water supply, showing 30% or more. Every consumption rate increases with annual household income. The average consumption rate of 4 districts is 11,137Mcal/household/year. (NEDO)

  8. Basic research report on regional new energy vision drawn up for Saga Prefecture; Sagaken chiiki shin energy vision sakutei chosa hokokusho (kiso chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The need of new energy introduction is found in matters relating to energy security, resources depletion, environmental problems, and the construction of distributed energy sources. The total amount of new energy in the prefecture is 4,859,052Gcal (525,301kl in terms of crude oil), which occupies approximately 30% of the energy that the prefecture demanded in fiscal 1996. Out of the said new energy, those from the sun, wind, ocean, and small- and medium-scale water systems may be acquired in the form of electric power, and they add up to 3,615,424MWh (3,109,265Gcal in terms of calorific value, 336,137kl in terms of crude oil) and occupy 64% (including industrial wastes) of the whole amount. As for the percentage of each type of new energy, solar energy is the highest, its amount of 2,973,679Gcal (321,479kl) occupying 61.2% of the whole, followed by the energy from wastes whose amount in total is 695,131Gcal (75149kl) occupying 14.3%. The possibility of introduction of new energy is studied and the conclusion is described for each energy type, district, and sector (residential and commercial, industrial, transportation). The respects on which prudence should be exercised in introducing new energy are also discussed. (NEDO)

  9. Fiscal 1998 research report. Feasibility survey on offshore wind power generation in Japan; 1998 nendo chosa hokokusho. Nippon ni okeru yojo furyoku hatsuden no donyu kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This survey studied the feasibility of large-scale offshore wind power generation in Japan. Attempt was also made on preparation of outline maps of offshore wind around Japan. The cost of future offshore wind power generation systems is roughly dependent on technical issues and environmental issues. As technical issues, 'installation site,' 'foundation,' 'system interconnection' and 'maintenance/management' were summarized based on applications in Europe. As a result, it was clarified that technical issues can be solved with existing technologies to a certain extent, however, those relate to economical problems closely. The previous environment impact assessments say that wind power generation has no problems on the environmental issues. As relatively strong wind coastal areas, the outline maps of offshore wind point out Western Hokkaido area, Japan Sea area of Tohoku district, Pacific ocean area of the central part of Honshu, Genkai Nada area, Western Kyushu area and Southwest islands area, and suggest that these areas are promising for offshore wind power generation. (NEDO)

  10. FY 1997 report on the field survey on country situations including efficient energy consumption. Vietnam; 1997 nendo chosa hokokusho (energy shohi koritsuka nado chiiki josei genchi chosa). Vietnam

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Field survey was made on the current state of and issues on energy in Vietnam. In Vietnam, firewood is in wide use as non-commercial energy, and sums to a half of total energy consumption. Other energies such as hydroelectric power, petroleum, natural gas and coal are self-sustainable. Commercial energy consumption in 1995 is estimated at 10,070,000t in oil equivalent, which is broken down into 23% for coal, 42% in oil, 5% for natural gas and 30% for electricity. Abundant water resources will form the mainstay of future electric power supply. Commercial production of oil started in 1986 becoming an oil exporting country. Several promising natural gas fields were discovered as the result of the exploration by foreign capital. Coal deposits are estimated to be nearly 3.5 billion tons, and most of them are anthracite. Electric power demand is growing at a higher rate than the economic growth of Vietnam. The growth rate of electric power demand is set to be 1.3 times that of GDP. Since construction funds for new plants cannot be satisfied with the national budget and domestic investment alone, the country is expecting foreign capitals. 21 figs., 36 tabs.

  11. Report on survey of promotion of activities implemented jointly in China in FY 1997; 1997 nendo chosa hokokusho (Chugoku ni okeru kyodo jisshi katsudo no suishin chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Rapid economy growth has been observed in Asia including Japan. On the other hand, problems of population and environment grew even worse with the economic growth. Especially, China is the second CO2 emission country in the world. Large energy demand is still forecasted with its economic growth in the future. It is well-known that the energy consumption per unit GDP is very large. Therefore, it is very significant to promote the activities implemented jointly with China for mitigating the emission of greenhouse gases including CO2, which provides a significant meaning for solving global environmental issues as well as for improving regional environmental issues. It is necessary for the above to recognize the appropriate current situations and to promote the activities implemented jointly suitable for the country. Based on the discussions and information exchanges about environmental issues with staffs concerning environmental policies and scientists as well as the field surveys, methods for the activities implemented jointly were investigated to provide some proposals. 4 figs., 8 tabs.

  12. Research report of fiscal 1997. Basic research on the commercialization of innovative energy technologies; 1997 nendo chosa hokokusho. Kakushinteki energy gijutsu no jitsuyoka ni kansuru kiso chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper summarizes the research result in fiscal 1997 from the basic research results on the commercialization of innovative energy technologies. The target of a photovoltaic power generation market includes isolated power sources (several kWp) for distant places or developing countries, and those (several tens kWp) for personal residences or public facilities. Although the former is mainly promoted in the West, while the latter over the world, their profitability is unsolved. Power plants over several hundreds kWp are in demonstration test. Solar heat power generation of several tens to hundreds MWp is most profitable, however, small-scale one is poor in feasibility. Australia takes an interest in distributed photovoltaic power generation directly connected with actual lives of residents, and has a dominant opinion that desert is useless as large-scale site. This country lays emphasis on protection and maintenance rather than positive use of desert based on a basic cognition that desert is easily changed and broken. The Australian government announced power company`s obligation to use renewable energy by 2%, and a strong organization is scheduled to be newly established. 59 figs., 57 tabs.

  13. Model operation to improve energy consumption efficiency in developing countries (demonstration study on material preheating equipment for an electric furnace (using reduced iron as a raw material)). Investigation project 2. Report on histories of energy saving technologies and environment preserving measures used in Japanese iron and steel industry; Hatten tojokoku energy shohi koritsuka model jigyo (denkiro no genryo yonetsu sochi (kangen tetsu genryo) ni kakawaru jissho kenkyu (chosa jigyo 2)). Nippon tekkogyo ni okeru sho energy gijutsu to kankyo taiskau gijutsu no tekishi hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    With an objective to contribute to economic growth and global environment preservation in the Asian territories, investigations were made on histories of energy conservation and environment preserving measures used in Japanese iron and steel industry. Energy conservation in blast furnace and converter methods are based on the following actions: improvement in energy efficiency (charging moisture adjusted coals and other techniques), energy recovery (blast furnace gas expander power generation and converter gas recovery), process simplification (continuous casting, heated piece charging and other techniques), and use of alternative energies. With regard to the environment, application of such environmental preserving measures have been advanced rapidly since the 1965`s as waste gas reduction, coke furnace gas liquefaction, and reduction of dusts, soots and noise. At the same time, slag re-utilization has been moved forward. As the building material demand has increased, the use of electric furnace steel making process using scraps has increased, whose production has exceeded one-third of the crude steel production, or 32 million tons. Energy conservation in the electric furnace process consists of use of ultra high power, direct current and scrap preheating, by which unit requirement in calorific power was reduced from 1.5 million to 1.2 million kcal/t or less. The unit requirement for energy consumption for crude steel production in the Japanese iron and steel industry has reduced by 10% from 4.96 million kcal/t in fiscal 1980 to 4.44 million kcal/t in fiscal 1989. 159 refs., 84 figs., 25 tabs.

  14. Leading research and study report for fiscal 1998. Report on leading research and study on intelligent fiber; 1998 nendo sendo chosa kenkyu hokokusho. Inteligent fiber sendo chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Researches were conducted with a view to organizing projects for developing intelligent fibers, equipped with environmental friendliness and amenity without being deprived of their original properties as structural and clothing materials, the ultimate goal of the effort being the creation of harbingers of next-generation fibers which would contribute to the advance of industries related to environments, medicine and welfare, and information. What were learned from fiscal 1998 researches are mentioned below. The strength that the general-purpose fibers currently in use exhibit is so small as to be but several percent of what is theoretically predicted for them. Demand will increase a great deal if the actual strength is doubled, for which new technologies have to be developed including those involving super-fiber texture control. For providing the fiber with such functions as environment-friendliness, amenity, etc., it is necessary to develop phasal structure control technologies with regard to fiber morphology, surface texture, etc. For success in practical application in the future of such super-fiber materials, each specimen needs to be manufactured in the order of kilogram by way of trial. Moreover, fiber evaluation techniques have to be developed in the three domains of software, hardware, and interface. (NEDO)

  15. FY 1997 report of survey on the intellectual property in international collaboration research project; 1997 nendo chosa hokokusho (kokusai kyodo kenkyu ni okeru chiteki zaisanken ni tsuite no chosa hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In promoting international collaboration research project, coordination of the patent system of each country which participants to the project belong to has broad implications in concluding the contract for the project. For example, in Japan, 100% of the patent belongs to the government for contrast or collaboration project with the government. While, in the USA, the patent developed by the private company belongs to the private company even for the contrast project. In Japan, the shared patent can not be transferred to the third party or implemented without agreement with the partner. While, in the USA, the shared patent can be transferred to the third party or implemented without agreement with the partner. Due to such a difference, some projects can not be established by ill coordination of intellectual property even when the meaning of the projects is well understood. In this survey, was investigated the outline of patent systems of major countries to study about what should well balanced treatment of intellectual property in international collaboration research project be in the future. 4 figs., 8 tabs.

  16. Fiscal 1997 survey report on the trend of global warming protection measures of substituting freons; 1997 nendo chosa hokokusho (daitai freon no chikyu ondanka taisaku doko ni kansuru chosa hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The trend survey was conducted of global warming protection measures by participation in international conferences, scientific society meetings and lecture meetings, and by literature surveys. We participated in the international conference on ozonosphere protection measures. In the 9th meeting of the nations which concluded the Montreal Protocol, the strengthening of restrictions on methyl bromide was decided on. In the UNEP solvent technology selection conference and the OORG conference of the World Bank, reports were made on substituting solvents in Japan, activities supporting developing countries, and the developmental trend of urethane use foaming agent. In the international conference on ozonosphere protection measures, introduced were the present status of Japan`s ODA for developing countries and examples of success of the substitution in the solvent field. The paper included nine reports on CFC destruction technology related literature made public in the past one year. The paper also introduced a comparative study of de-HCFC substituting technology at U.S. Oak Ridge National Laboratory, U.S. EPA`s prediction of emission of fluorine 3 gas, the predicted value of HFC emission and trial calculation of contributing rate in all greenhouse gases by IIR, Green Peace and Elf Atochem, and NOAA`s measured data on SF6 in the atmosphere. 49 refs., 46 figs., 26 tabs.

  17. Basic research report on new energy vision drawn up for Mie Prefecture; Mieken shin energy vision kiso chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Use and existence of new energy in Mie Prefecture are investigated. Described in this report is the use of photovoltaic power generation, wind power generation, RDF (refuse derived fuel)-fired power generation, and wave power generation; evaluated in this report is the existence of solar energy, wind energy, temperature difference energy, biomass energy, and refuse energy. As for solar energy, the residential house is expected to be the highest in the amount of solar energy collection, to be followed by the factory and mill, warehouse, business office, retail store and department store, school house, and the government office, named in the descending order. As for wind energy, wind characteristics are excellent across one third of the prefecture, with a annual average wind speed of not less than 5m/s recorded at places totaling 1900km{sup 2}. As for temperature difference energy, although sea water and river water are available in abundance, yet this energy will require heat consuming parties in presence at the site of water intake. In relation with the use of biomass energy, there is a promising use of methane produced out of excrements of hogs which are found in a great number in the prefecture. As for the production of energy out of refuse which is preferred to be carried out at a refuse treatment-dedicated plant, its adoption will be considered when a new plant is to be built in the future. (NEDO)

  18. Fiscal 1995 investigation on biological fixation of carbon dioxide; 1995 nendo seibutsuteki CO2 kotei ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    To cope with the global warming caused by CO2, an investigation was conducted into biological fixation. It is necessary to make a many-sided and comprehensive study on the mechanism of CO2 fixation, the scale (area and carbon holding density), the rate and the environmental impact of the introduction of the technology and the technical problems, and to make a quantitative evaluation of each of the methods in order to make them practical proposals. The global ecosystem is classified into the land biota and ocean biota, and each typical ecosystem was surveyed in terms of the surface area, the carbon holding amount (presently existing amount), the net primary production amount, the required nutrient salt amount, the transpiration rate, etc. Next, a discussion was made on the increasing effect of the carbon fixation amount by changing the present ecosystem from the aspect of scale and rate. At the same time, a study was carried out of energy efficiency, economical efficiency and problems. Last, elementary technology was taken up which seems to be important for implementing measures for the biological carbon fixation. As to the ocean, it is necessary to obtain information, which is not sufficient to utilize marine biota for CO2 fixation, especially on the mechanism of depth-direction transfer of organism and its quantitative grasp. As to the land, one of the measures is conversion of the ecosystem where the amount of carbon fixed is small to the ecosystem where the amount is large. 249 refs., 58 figs., 51 tabs.

  19. Geothermal development promotion survey. No.A-1. Haneyama area; Chinetsu kaihatsu sokushin chosa hokokusho. Haneyama chiiki

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    The result and evaluation of the geothermal development promotion survey in the Haneyama area were summed up. The geothermal development promotion survey in the Haneyama area was conducted in the area of approximately 300km{sup 2} of Kujuu-machi, Oita prefecture to make extracts through the ground survey and well survey of the high earth temperature abnormal zone in the north of the Houhi geothermal zone. The ground survey included the geology/alteration zone survey, density survey, geochemical survey, and electromagnetic survey. From the result of drilling six holes for the heat flow rate examination and the existing test boring data, the earth temperature distribution within this survey area was outlined. In the structural test boring survey, a maximum temperature of 140.6{degree}C was recorded at a depth of 1045m. The result of this survey indicated that the CL-SO4 type hydrothermal system in the Noya-Mizuwaketouge area probably extends near the south of Fukumayama. However, since the storage temperature is estimated at approximately 140-195{degree}C, the hydrothermal system is not expected to be used as resource for the steam power generation, but for the binary power generation. 98 refs., 144 figs., 92 tabs.

  20. Research report of fiscal 1997. Basic research project on energy saving in developing countries (cooperative research on oil saving / basic research on the industry of Thailand); 1997 nendo chosa hokokusho. Hatten tojokoku energy shohi koritsuka kiso chosa nado jigyo sekiyu shohi koritsuka kyoryoku chosa (Taikoku sangyo kiso chosa hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Field research was made for oil saving in Thailand. To promote energy saving in a textile industry as main export industry, its motivation for production stuff is essential in business improvement. Proposal for work improvement, supply system of bonuses, and small-group activity are effective. Management of an energy consumption rate is essential in business management. Use of efficient waste water treatment equipment is also one of the issues. In food factories, various scopes for improvement are still found by mass/heat balance analysis in production process. As an example, a large amount of water is consumed in vain for washing raw rice in a rice powder factory, and separation of SS precipitate from waste water should be improved. Because of lagoon treatment, an effluent standard is not achieved in spite of consumption of wasteful aeration power. This treatment is reasonable because of its scale and site, although the standard can be achieved by activated sludge method. Reconsideration of the standard is also necessary based on a local total BOD load capacity. The profitability of a methane fermentation method should be examined. 72 figs., 95 tabs.

  1. Investigations on an environment friendly chemical reaction process (eco-chemistry). 2; Kankyo ni yasashii kagaku hanno process (eko chemistry) ni kansuru chosa. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    In order to structure a chemical reaction process that does not discharge a large amount of waste by-products or harmful chemical substances, or so-called environment friendly process, investigations and discussions were given based on the results derived in the previous fiscal year. A proposal was made to reduce environmental load on development of oxidized and dehydrogenated catalysts that can produce selectively ethylene, propylene and isobutylene in an oxidation process. In liquid phase oxidation, redox-based oxidation and solid catalyzation of automatic oxidation reaction were enumerated. In acid base catalyst reaction, development of ultra strong solid acid was described to structure no pollution discharging process. In the fine chemical and pharmaceutical fields, the optical active substance method and the position-selective aromatics displacement reaction were evaluated to reduce environmental load. A questionnaire survey performed on major chemical corporations inside and outside the country revealed the following processes as the ones that can cause hidden environmental problems: processes discharging large amount of wastes, processes treating dangerous materials, and processes consuming large amount of energy. Development of catalysts is important that can realize high yield, high selectivity and reactions under mild conditions as a future environment harmonizing chemical process. 117 refs., 23 figs., 22 tabs.

  2. Global environment assessment survey by advancing the energy demand and supply structure. 4; Energy jukyu kozo kodoka chikyu kankyo eikyo chosa. 4

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    To investigate the energy demand and supply structure in Japan, the international trend of approaches to global warming problems and the mitigation options to global warming in the energy related sectors have been surveyed. For the United Nations Framework Convention on Climate Change, an Ad-hoc Group has discussed relevant topics after the 1st conference of the Parties. Meetings of the Group primarily focused on what objectives to set for the reduction of greenhouse gas (GHG) emissions in and in and after 2000. IPCC completed their Technical Paper in November 1996 in which technologies and measures to reduce GHG emissions and to enhance GHG sinks were analyzed and evaluated in various aspects. This Paper discusses about each sector of institutional buildings sector, transport sector, industrial sector, and energy supply sector. Especially, in the energy supply sector, promising approaches to reduce future emission include more efficient conversion of fossil fuels, switching to low-carbon fossil fuels, decarbonization of flue gas and fuels, CO2 storage, switching to nuclear energy, and switching to renewable sources of energy. 5 refs., 2 figs., 14 tabs.

  3. Survey of effects of enhancement of the energy supply/demand structure on the global environment. 3; Energy jukyu kozo kodoka chikyu kankyo eikyo chosa. 3

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    For the purpose of studying how the energy supply/demand structure in Japan should be, a report on the secondary IPCC (Intergovernmental Panel on Climate Change) evaluation was analyzed. Possibilities of reducing the world CO2 emissions in association with the energy consumption were studied in the five assumed cases. Every case says that CO2 can be reduced to 1/3 of the 1990 level by 2100. In a case of the use of biomass as main fuel (1), the use of primary energy is suppressed to two times the 1990 level, and photovoltaic/wind/biomass power generation is introduced in a large quantity. Synthetic methanol and hydrogen are used for transportation and commercial/residential use fuels. There are four more assumed cases: the use of nuclear power as a substitute for renewable energy in the power generation in (1), the use of natural gas of 1.5 times that used in (1), the substitution of coal for biomass used in (1), and the assumption that the demand for primary energy in 2100 will be twice that used in (1). In Japan it is assumed that basically the nuclear power generation will be expanded, that the photovoltaic and waste power generation will be introduced in a large quantity, and that synthetic methanol and hydrogen are mainly used as transportation and commercial/residential use fuels. It is necessary, therefore, to analyze conditions under which the quantity introduction of such non-fossil energy is made possible. 11 figs., 31 tabs.

  4. Project to promote the development of global environmental industry technology. Feasibility study of research exchanges; Chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo. Kenkyu koryu kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    In fiscal 1995, three teams were organized to study the following subjects: plant genetic and cellular engineering in relation to drought stress; simulation models of global environment for accurate assessment and prediction; the APEC Virtual Center for environmental technology exchange. The team studying plant genetic and cellular engineering in relation to drought stress visited the Department of Botany, Hebrew University of Jerusalem, Israel, the Jacob Blaustein Institute for Desert Research, Ben-Grunion University, Israel, the Department of Biochemistry and the Office of Arid Lands Studies, Arizona University, the U.S. to survey the present and future trend of the study and feasibility of research exchanges. The team studying simulation models of global environment for accurate assessment and prediction visited Yale University, Massachusetts Institute of Technology, Electric Power Research Institute, and Battle Research Institute in the U.S. to survey feasibility of research exchanges. The team studying the APEC Virtual Center for environmental technology exchange visited institutes in ASEAN countries to survey needs for the Virtual Center. 312 refs., 74 figs., 17 tabs.

  5. Research of environmental bioecosensing technology using ecological information. Part 2; Seitaikei joho ni yoru kankyo bio ecosencing gijutsu ni kansuru chosa. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Basic considerations of exploring and cultivating environmental reporter organisms are summarized. Mechanism of genetic engineering amplification and molecular biological amplification, and approach to combining them to a hardware as a bioindicator system are investigated. For the current status of molecular biological measurement technology for measuring ecological environment and its application, environmental diagnosis from a phyropathological viewpoint, environmental diagnosis using microorganisms, test fabrication of genetic sensor, and overseas examples of environmental monitoring network are described. For the application of ecological information and functions for developing innovative environmental remediation technology, issues and potential areas for research and development regarding the bioremediation technology in which the US has achieved a progress for the benefit of soil environment remediation are summarized. For the phytoremediation, an area of bioremediation, the metabolism of microorganisms which live in the rhizosphere, and the technology for controlling the microorganisms in the soil through plants are investigated. 66 refs., 50 figs., 17 tabs.

  6. Research on the information network for R and D on the innovative technology for the earth; Chikyu kankyo taisaku gijutsu no kenkyu joho network chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    With an objective to structure an information network system to promote research information exchange on global environment preserving technologies, the currently used RITE information system was reviewed, and the WWW home page was discussed. Three years have passed since the structuring of the RITE information system, during which remarkably popularized use of the Internet can be seen. With respect to provision of research information through the Internet, IP connection is possible in almost all the countries; a variety of research information utilizing WWW are provided; multi-media functions are advancing in image information, audio information and animated image information; and retrieval servers are improved according to applicable fields. Regarding the RITE information system, discussions are given on improvement in the Internet access environment, and expansion in information providing scope and information exchange environment. A WWW home page was prepared on a trial basis, which indicated that a considerable amount of information can be provided even under the presently retained information and the current network environment. 2 refs., 28 figs., 3 tabs.

  7. Survey on synthesis and reaction of environmentally benign water-soluble metal complex catalysts; Kankyo chowagata suiyosei sakutai shokubai no gosei hanno no chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This report describes the research trend survey results on the synthesis and reaction of water-soluble metal complexes which are regarded as environmentally benign catalysts. For the synthesis and catalysis of water-soluble complexes, synthetic methods of water-soluble phosphines, such as sulfonated TPPMS and TPPTS, are described in detail. Synthesis and reactivity of hydroxymethylphosphines are introduced, and the application of electrospray mass spectroscopy is elucidated as a tool for the analysis of them. Changes of the application of transition metal complexes with water-soluble phosphines to catalysis are described. Dual catalysts which have both functions of phase transfer catalysts and homogeneous catalysts are introduced. Concept of counter phase transfer catalysts is also introduced, and some catalytic reactions are described. In addition, this report introduces catalysis of water-soluble polymer-supported metal complexes, immobilization of metal colloids with water-soluble ligands and their analysis, and water-soluble complexes as hybrid catalysts. 144 refs., 94 figs., 10 tabs.

  8. Report on the invitation program for developing countries concerning technology promotion project of global environmental industry in FY 1997; 1997 nendo chikyu kankyo sangyo gijutsu suishin jigyo ni kakawaru chikyu kankyo kanren gijutsu kaigai kenkyusha shohei jigyo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In an effort to help preserve the global environment, International Center for Environmental Technology Transfer (ICETT) contributes to the solution of global environmental problems by promoting research exchanges with developing countries. As a part of this effort, ICETT hosted an environmental development researcher who visited Japan from the Institute of Environmental Research of Chulalongkorn University in Bangkok, Thailand. The invitation was extended at the request of NEDO. During the period of this investigation between September 16 and December 14, 1997, a photocatalyst was prepared and its performance was evaluated under the theme ``Application of photocatalysis to purification of atmospheric environment.`` At the same time, roadside test spots were inspected to study the practical application of optical photocatalysis. The visiting researcher also visited the National Institute for Resources and Environment to discuss with the staff of institute. This helped to deepen understandings of the state of air pollution problems confronting Japan, Europe, and North America, as well as issues related to the technologies that have been developed to solve these problems. The visiting researcher toured the RITE and examined Japan`s progress in the development of environmental control technology through joint research involving government, industry, and academia. At ICETT, the visiting researcher received training in Japan`s approaches to environmental problems in developing countries

  9. Fiscal 1996 survey report on the environmentally friendly type coal utilization system feasibility study. Survey by region/industry in India; Kankyo chowagata sekitan riyo system kanosei chosa. Indo ni okeru sekitan riyo gaikyo chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    A survey was made in India which is a coal producing/consuming country following China in Asia and where coal is used for about 60% of the primary commercial energy. The survey was conducted on coal production/distribution/utilization and environmental issues, aiming at studying feasibility of introducing the environmentally friendly coal utilization system into every industry including the residential/commercial one, and at implementing a comprehensive master plan including Japan`s international cooperation. Total power source facilities in fiscal 1995 are 83.3 million kW, 64% of which are coal thermal power facilities and generated 260 TWh, 69% of the total output energy. Main commercial energy sources are coal, oil and natural gas, and oil is self-sufficient. The survey this time did not examine very well the actual state of the environmental pollution problem caused by the coal utilization. Indian coal is high in ash content but low in sulfur content, and therefore, SOx polluting air has not been a very important problem so far, but soot/smoke is almost the problem. Further, ash treatment after combustion at boilers, etc. is expected to be a big problem in the future. 49 figs., 88 tabs.

  10. Fiscal 1996 survey report on the environmentally friendly type coal utilization system feasibility study. Survey by region/industry in China; Kankyo chowagata sekitan riyo system kanosei chosa. Chugoku ni okeru chiiki/sangyobetsu chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of establishing a coal utilization system which is environmentally friendly and effective, a survey had already been conducted jointly with China on the introduction of an environmentally friendly type coal utilization system, and a master plan for the whole China had been worked out. To make the results of the master plan more widely spread, this survey aimed in a 2-year plan at diagnosing coal utilization technology of the plants selected from each industry in the specified region and at making individual and concrete guidelines for the introduction of technology on CCT for engineers at sites and persons concerned with local administration. In the first fiscal year, a survey was made on coal production/utilization and the environmental situation in Henan Province for survey. Moreover, two plans each were selected as model plant from the chemical industry and construction material industry which are main industries in the said region to survey the present situation of coal utilization technology and measures for environmental protection. Based on the survey, more effective and more environmentally adaptable measures were also studied. 67 figs., 24 tabs.

  11. FY 1998 annual report on the fourth international forum on environmental catalysis (IFEC 99); Dai 4 kai kankyo shokubai kokusai forum (IFEC '99) 1998 nendo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The 4th international forum on environmental catalysis, held in January 1999 in Chemical Society of Japan's Hall, had a total attendees exceeding 170, including 10 foreign attendees invited. A total of 20 papers (including 10 by foreign attendees) were presented, discussing diversified problems; 3 keynote addresses regarding (to what extent environmental catalyst can contribute); and 5 for the session of catalysts for clean processes, 6 for the session of eco-friendly chemistry, and 8 for the session of environmental catalysts for air pollution. The lectures included (global environmental problems and environmental catalysts) by Prof. Segawa of Sophia University as the opening address; solid base catalysts by Prof. Ono of Tokyo Institute of Technology in the session of (catalysts for clean processes); activation of dioxygen by transition metal complexes-new approach to highly selective catalytic oxidation with molecular oxygen by Prof. Moro-oka of Tokyo Institute of Technology in the session of (Eco-friendly chemistry; and environmental catalysts-present and future as the comprehensive review by Prof. Misono of University of Tokyo in the session of (environmental catalysts for air pollution). (NEDO)

  12. Report of the researcher exchange promotion project on the environmental issues in the Asia-Pacific region; Asia/Taiheiyo chiiki kankyo mondai kenkyusha koryu sokushin jigyo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Proposals have been made for the establishment of a network (ETERNET-APR) linking those involved in the research and development of environmental technology in the Asia-Pacific region in order to limit the environmental impact of industrial activity. By pursuing active exchanges of information and personnel, researchers in environmental technology in the Asia-Pacific region have been making serious efforts to establish such a network. This fiscal year, the Internet Web site of the ETERNET-APR has been created using the data collected to date. This database includes information on some 350 researchers and 200 research projects from seven countries. The first international symposium was successfully held at Environmental Research Institute of Chulalongkorn University in Thailand (ERIC), hosting 200 environmental researchers from 10 countries in the Asia-Pacific region. Tripartite sister laboratories ties among the National Institute for Resources and Environment (NIRE) and three Korean laboratories were forged. The sister laboratory project between ICETT and ERIC is also proving effective. These successes prove that intraregional joint research, the objective of ETERNET-APR, has begun to take shape in this year

  13. International symposium on environmental impacts of advanced alternative to CFC; CFC shinki daitai busshitsu no kankyo eikyo ni kansuru kokusai symposium hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-07

    The international symposium on environmental effects of new CFC substitutes was held in Tsukuba City, Ibaraki Pref. on February 7-9, 1996, and 19 papers were made public. In Session 1 (Plenary lecture), reports were made on Global warming and climate change: a review of recent studies; Stratospheric ozone, CFCs, and CFC-substitutes: an update, etc. In Session 2, Measurements of OH rate constants for advanced refrigerants as well as HCFCs and HFCs; The reaction rate of CFC alternatives with OH radical; Experimental and estimated rate constants: reactions of hydroxyl radicals with several halocarbons, etc. In Session 3, Measurement of uptake coefficients of some acetyl halides and fluorinated ethers into water; Mass transfer at the air/water interface: removal processes of halocarbonyl compounds; Heterogeneous reactions of fluorinated ethers on allophane or titanium dioxide, etc. In Session 4, papers were reported on model calculations relating to the global warming.

  14. Fiscal 1995 survey report on the feasibility study of the environmentally friendly type coal utilization system. Survey on the environmentally friendly type coal utilization system in the coal preparation sector in China; Kankyo chowagata sekitan riyo system kanosei chosa. Chugoku no sentan bumon ni okeru kankyo chowagata sekitan riyo system ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-06-01

    Specifying the coal preparation technology among clean coal technologies (CCT) in China, the paper investigated governmental policies, plans, standards of coal preparation technology, subjects, etc. toward the introduction/spread of coal preparation technology, and studied decision, introduction and spread of the coal preparation system suitable for the coal utilization status in China. The survey was conducted in Shanxi and Henan Provinces which are main provinces of coal production, and field survey was made at some selected coal preparation plants having different operational conditions. In the field survey, problems on the operation were extracted, and points of improvement were studied at the same time. Further, to grasp the positioning of coal preparation in CCT in China, survey was carried out on laws and regulation on coal preparation in terms of energy and environmental policies. Finally, the result of the field survey was analyzed, a coal preparation system of which the introduction/spread in medium- and long-term are enabled was proposed considering the coal utilization status and economic situation in China, and how to introduce/spread it was studied. 35 figs., 42 tabs.

  15. Fiscal 1996 survey report on the environmentally friendly type coal utilization system feasibility study. Feasibility study of the environmentally friendly type coal utilization system in Malaysia and Vietnam; Kankyo chowagata sekitan riyo system kanosei chosa. Malaysia Vietnam ni okeru kankyo chowagata sekitan riyo system kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This survey arranged the status of coal utilization technology and the status of coal production, supply, etc. in Malaysia and Vietnam, examined/studied coal utilization systems in both countries, and finally assessed feasibility of introducing the environmentally friendly type coal utilization system. As a country of primary energy source which is abundant in crude oil, natural gas, hydroelectric power, coal, etc., Malaysia now depends on crude oil and natural gas for 80% of its energy, and places emphasis on exploration of natural gas and oil refining. In electric power and cement industries where coal is consumed, effectiveness and environmental issues in association with coal utilization are future subjects. In Vietnam, the north is abundant in hydroelectric power and anthracite, and the south in oil and gas resource, but the north and central districts are in a state of undevelopment. Coal is used for coal thermal power generation, cement industry, and residential/commercial fuel. In the future, effective coal utilization and environmental issues will be subjects. 16 refs., 38 figs., 75 tabs.

  16. Fiscal 1995 survey report on the feasibility study of the environmentally friendly type coal utilization system. Feasibility study of the environmentally friendly type coal utilization system in Thailand; Kankyo chowagata sekitan riyo system kanosei chosa. Tai ni okeru kankyo chowagata sekitan riyo system kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-06-01

    The paper surveyed the present situation and future trend of economy, energy supply/demand, coal production/distribution/utilization and the environmental effects in Thailand. The survey on the coal utilization and its environmental effects was partially requested of the environmental research institute in Thailand. The amount of coal utilization in Thailand rapidly increased to nearly four times as large as that ten years ago mainly in terms of domestic lignite under the government`s policy on expansion of the domestic energy use. However, most of this domestic lignite is low-grade coal with low calories and high sulfur content, and the use of it was rapidly increased mostly in power generation sector without no adequate environmental measures taken. This caused an environmental problem on air pollution due to sulfur oxides at Mae Moh power plant in the north several years ago, and the damages to the regional residents, etc. were given much publicity by journalism and developed the social problem. Accordingly, Thai people are now critical of the coal resource exploration and the coal use expansion. Under the circumstances, the Ministry of Industry and the energy related ministries/offices are obliged to review their development/promotion plans. 84 figs., 99 tabs.

  17. Fiscal 1996 survey report on the environmentally friendly type coal utilization system feasibility study. Feasibility study of the environmentally friendly type coal utilization system in Thailand; Kankyo chowagata sekitan riyo system kanosei chosa. Tai ni okeru kankyo chowagata sekitan riyo system kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The paper investigated and studied the present situation and future trend of coal utilization and distribution in Thailand, and the present situation of environmental effects and the measures taken for environmental protection. Around 2010, coal will probably be produced only at EGAT`s Mae Moh (MM) coal mine. Demand for overseas coal is expected to be 40-50 million tons in 2011, and preparation of the coal center becomes a subject. For general industry use coal, pretreatment such as coal preparation, coal blending and briquetting is needed, considering coal quality, usage, transport distance and environmental effects. Brown coal of MM coal mine is a lignite with high sulfur, high ash content and low heating value. Wide spread of its use can be expected if upgrading is possible such as desulfurization, deashing, increasing heating value. In the electric power generation field, the absorber was installed at the existing boiler of the mine-mouth generating plant to conduct a verification test on high grade desulfurization of ultra-high sulfur lignite. In the industry field, the circulating fluidized bed boiler was adopted. In the residential/commercial field, introduction of briquette was proposed. 80 refs., 84 tabs.

  18. Report on the FY 1995 basic survey for industrialization related to the survey of overseas geological structure (Pondok Labu East area, Indonesia); 1995 nendo kaigai chishitsu kozo nado chosa ni kakawaru kigyoka kiso chosa (Indonesia Pondok Labu higashi chiku) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The survey was conducted based on 'Scope of work for detailed coal exploration in the Pondok Labu East area of East Kalimantan Province, Kalimantan, Indonesia' concluded on June 16, 1995 between NEDO and P.T. Tanito Harum which owns the mining right. The area for survey is approximately 10km west of Tenggarong city, the capital of Kabupaten Kutai, East Kalimantan Province which is northeast part of Kalimantan island of Indonesia. The field survey was divided into the geological/boring survey and the survey of conditions for underground mining development and the infrastructure. This survey made it clear that in the underground mining of PDL7A seam, assuming the minable coal reserve to be 6.81 million tons, it is possible to produce raw coal of 0.5 million tons/year by adopting the longwall pick mining. The raw coal is all prepared, and the yield is 80%. Accordingly, the production of product coal is 0.4 million tons/year. Attached were the boring log (JN9-94-0855), physical log (JN9940856), and BIP survey report (JN9940857). (NEDO)

  19. FY 1997 report on the survey of potential impacts of enlarging ASEAN on political and economic systems in South East Asia; 1997 nendo chosa hokokusho (ASEAN kakudai no Higashi Asia no seiji keizai chitsujo eno eikyo chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This report surveys potential impacts of ASEAN (Association of South East Asian Nations) on inter-ASEAN affairs and its external relations when ASEAN will enlarge its members to include all nations in South East Asia, and thus fully represent the region. For this purpose, the survey was conducted on Vietnam, Myanmar, Laos and Cambodia, which joined in 1995, from the viewpoint of their economic and political system, and their relations with other member countries. The nature of ASEAN has gradually transformed, in which all the countries in the region have increased and internal economic issues have been tackled. It has an aim to stimulate inter-ASEAN trade and induce foreign direct investment into ASEAN as a whole by reducing import duties on intra-ASEAN trade. Underlying in these, new development is a concern about growing economic and military power of China. ASEAN solidarity will work an leverage against China should change toward worse, and ASEAN will function as a regional stabilization factor. ASEAN is needed for the stability of both in economic and political order in East Asia. Japan has to further promote its cooperation with ASEAN to help its solidarity as an association. 24 refs., 21 figs., 25 tabs.

  20. Fiscal 1996 report on the investigational research on the construction of a database of physical functions; 1996 nendo chosa hokokusho (shintai kino database no kochiku ni kansuru chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of realizing `the affluence` sought in the Japanese economic society, the supply and preparation of products, service and environments friendly to human beings seem to be important. In the future, the development of products which are fully considered also of aged and handicapped people is more expected than the conventional manufacturing of products added with value. Especially in accordance with the rapid aging, from a viewpoint that the lowering of physical functions caused by aging has an exactly close relation with the response to products and the environment, development of the database of physical functions for the aged which is useful for the design is urgently promoted. First, the data to be supplied for database were selected. As to the selection method, the data required for database were defined by collection/analysis of the existing data, examination of the needs of enterprise designers, and analysis of daily activities. In the study of the database, the structure by which data can be effectively supplied was studied and verified by pilot database for extraction of the subjects and solution to the problems. 6 refs., 57 figs., 26 tabs.

  1. Fiscal 1997 report on the survey of biological CO2 fixation using arid land and oligotrophic waters; 1997 nendo chosa hokokusho (kansochi, hin`eiyo kaiiki wo riyoshita seibutsuteki CO2 kotei ni kansuru chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This survey is aimed to investigate various measures to be taken for biological CO2 fixation, to synthetically study feasibilities of the measures from various aspects of CO2 fixation mechanism, scale, speed, and environmental effects and technical problems in case of introducing those, and to assess the measures quantitatively. In this fiscal year, a study was proceeded with of possibilities of carbon fixation by afforestation and that by fertilization into ocean. The paper defined significance of afforestation in arid land, and especially advantages in conducting researches in West Australia. Relationships were examined among afforestation, precipitation and topography. The result of the survey was described of water- and salt-transfer simulation methods. Studies of arid land were made in terms of photosynthetic speed, transpiration speed, soil characteristics, measuring methods for precipitation and vaporization amount, and the examples. Seven places of Leonora where water source and water quality were examined were selected, and the measuring results were described. The paper summed up the state of utilization of biomass energy obtained from forest and commented on a scenario on tree-planting. Finally, a possibility was stated of the carbon fixation by fermentation into ocean. 178 refs., 121 figs., 53 tabs.

  2. Fiscal 1998 research report. Survey on data collection for development of new energy technology (fuel cell); 1998 nendo chosa hokokusho. Shin energy gijutsu kaihatsu kankei data shu sakusei chosa (nenryo denchi)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report is composed of Part 1: the development trend of fuel cells in fiscal 1998, and Part 2: the collected data and appendices. Part 1 includes 4 chapters, (1) The outline of the development trend, (2) Stationary fuel cell, (3) The development trend of fuel cell vehicles, and (4) The development trend of small transportable fuel cells. The report newly includes the development trend of small-capacity fuel cells and the report on 1998 Fuel Cell Seminar notable as an international conference on fuel cell summarizing the trend of fuel cells in fiscal 1998, as compared with the fiscal 1997 report. Part 2 is the collected data on domestic and foreign demonstration operation results of fuel cells, and technical development of every fuel cell. In addition to various collected data on the whole of fuel cells and their use techniques, Part 2 includes the principle, features, system configuration, performance simulation technique, application and market analysis of fuel cells, and the national policy and concerned laws on a subsidy system for introduction of fuel cells, for example. (NEDO)

  3. Report on the FY 1992 basic survey for industrialization related to the survey of overseas geological structure (Tebulan West area, Malaysia); 1992 nendo kaigai chishitsu kozo nado chosa ni kakawaru kigyoka kiso chosa Malaysia Tebulan nishi chiku hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-03-01

    The survey was conducted based on 'Scope of work for detailed coal exploration in the Tebulan West block of the Merit Pila coal field, Sarawak, Malaysia' concluded on June 18, 1992 between NEDO and Global Mineral which owns the mining right. The field survey was for the geological survey, survey of conditions of open pit mining, and infrastructure survey. The confirmed/estimated coal amount totaled 25,80 million tons in the main 4 coal seams. The all sulfur content is low, approximately 0.12%. The heating value is 5,820 kcal/kg. As to the infrastructure, various conditions are good for transportation, shipping facilities, coal yard, etc. from mine site to truck transport/barge transport/external route shipping. The drilling was planned to be made by open pit mining by the truck and shovel system, and the scale of the planned production was 0.3 million tons. The ash is low in amount, and clean coal is produced by crushing, sieving and washing. Attached were the borehole log (JN9940833), route map(JN9940834), and trench sketch (JN9940835). (NEDO)

  4. Leading research report for fiscal 1998. Research and study of 3-dimensional cell structure module engineering; 1998 nendo sendo chosa kenkyu hokokusho. Sanjigen saibo soshiki module kogaku chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For the formation of cellular tissues to replace bionic tissues, researches were conducted about technologies of forming bionic tissue modules by culturing various kinds of cells. As for the materials and methods for constructing cellular tissues, researches were conducted about the trends of research and development of 3-dimensional tissue culturing matrices and materials for micromanipulation. As for the development of technologies for the functionalization of 3-dimensionally structured cells, research and study were conducted about the technology of 3-dimensional cell structure organization through application of physical stimulation, the biochemical technology of differentiation inducing, and the differentiation inducing technology for hetero tissue culturing. As for the development of technologies for evaluation using 3-dimensionally structured cells, light CT (computer tomography), analysis and evaluation using spectroscopy and the like, feasibility of the biochemical analysis of the cell state using biosensors, technologies for measuring the secretion of carcinogenic and toxic substances, etc., were studied. In addition, the development of organic models to replace test animals, industrial evolution of 3-dimensional tissue module engineering, etc., were investigated. (NEDO)

  5. Research report of fiscal 1997. Survey on creation of high-efficiency renewable resources, and bioconversion technology; 1997 nendo chosa hokokusho. Kokoritsu saisei kano shigen no sosei narabi ni bioconversion gijutsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Survey was made on material production technology using creation technology of high-efficiency renewable resources (photosynthesis reaction of plants). Industrially usable plant resources in overseas countries and Japan were arranged, and plant resources unused for food were also surveyed. The present state of genetic engineering necessary for metabolic engineering of higher plants such as fit and high-expression technology of genes, plant cell cultivation, and control technology of plant cell multiplication is described, and elementary technologies required for future gene-recombined plants are predicted. Survey was also made on the trend of creation technology of industrial plants for fat and oil, biodegradable polyester, amino acid, cellulose, fiber (cotton) and forest wood. A patent list on plant biotechnology was prepared, and study on bioconversion of plant resources was also surveyed. Overseas R & D trends on conversion and effective use technologies of renewable bio- resources are reported, and process design and its profitability were evaluated through a case study. 414 refs., 87 figs., 55 tabs.

  6. Research and survey report of FY 1997 on the CO2 balance for high-temperature CO2 fixation and utilization technology; 1997 nendo chosa hokokusho (nisanka tanso koon bunri gijutsu ni okeru CO2 balance ni kansuru chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The purpose of this research is to clarify the application condition and effectiveness of high-temperature CO2 fixation and utilization technology. To evaluate the present process, it was compared with others, such as separation using a polymer membrane, physico-chemical absorption process, adsorption process, hydrogen contact reduction process, and biological fixation. The development trends of absorption, membrane, adsorption, and cryogenic separation were investigated. The questionnaire was carried out about the separation technologies which are in the stage of performance test using actual gas, to arrange and compare the data and information. The current trends of chemical and biological CO2 fixation and utilization technology were also investigated for arranging the subjects. High-temperature CO2 disposal by the carbonation in concrete waste has been studied, to clarify its application conditions and effectiveness. In order to compare the separation technologies, treatment processes of CO2 in the exhaust gas from boilers of LNG power generation and coal fired power generation were simulated. These processes were simulated by ASPEN PLUS for the modeling. Trends of application of ASPEN PLUS and collection of information were surveyed by participating in the ASPEN WORLD. 103 refs., 51 figs., 55 tabs.

  7. Report on FS survey for project of introduction of highly energy-efficient trolley buses into the Mexico Metropolitan Area in FY 1997; 1997 nendo chosa hokokusho (Mexico city eno sho energy gata trolley bus donyu project FS chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Traffic jam and air pollution by automobiles are currently getting severe in the Mexico Metropolitan Area. Trolley buses were introduced for improving the environment more than ten years ago. Vehicles become too old for use, and their energy efficiency is low. In this project, 200 highly energy-efficient trolley buses are introduced to replace old inefficient trolley buses, which results in the improved traffic convenience in the City and enhanced energy efficiency. The new energy-efficient trolley buses are made of energy-efficient control VVVF inverters produced and exported by MELCO (Mitsubishi Electric Corporation), energy-efficient motors by MELMEX (Mitsubishi Electric Corporation, Mexico), and bodies by MASA which is a major manufacturer of bus bodies. The objective of this research is to analyze the background of introduction of new energy-efficient trolley buses and the effects of the present project. The results of analysis are going to be utilized for future promotion of the Joint Implementation and Clean Development Mechanism. 30 refs., 30 figs., 24 tabs.

  8. Survey report of FY 1997 on the trends of novel CO2 fixation technology using bacteria and microalgae; 1997 nendo chosa hokokusho (saikin sorui wo riyoshita atarashii nisanka tanso kotei gijutsu no doko chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For this survey, the latest technology trends relating to microbial functions are summarized to recover and effectively utilize CO2, typical greenhouse effect gas, using microbial functions. Systematic survey and analysis are conducted concerning the microorganisms useful for fixing CO2, CO2 uptake mechanism during the microbial reactions, utilization methods of solar light and useful energy sources except solar light, highly efficient production of useful materials, and usage of produced useful materials. Research has concentrated on use of biological activities for this purpose through design of bioreactors using microorganisms (bacteria and microalgae) for efficient CO2 fixation. For the process to have net CO2 fixation as assessed by its life cycle and to make the process economically feasible, it is essential not only to fix CO2 merely in the form of biomass but in addition to convert it to useful materials by the catalytic activities of the organisms. Three categories were set for the survey, i.e., microorganisms with CO2 fixation ability, available energy for CO2 fixation, and target CO2 fixation products. 169 refs., 49 figs., 14 tabs.

  9. Fiscal 1997 survey report on a feasibility of international collaboration on bio-hydrogen R and D; 1997 nendo chosa hokokusho (bio suiso seizo gijutsu ni kakawaru kokusai kyoryoku kanosei chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    R and D of the production technology of biohydrogen is an option effective for the world energy supply technology and the world environmental preservation technology in the 21st century. At present, a project named `R and D of the environment harmony type hydrogen production technology` tackles the R and D of the hydrogen production technology using photosynthetic microorganisms, and promotes the R and D in this field from both aspects of a basis and application as seen in a workshop held including interchanges with researchers and research institutes overseas. With the recently increasing interest in bio-hydrogen production technology also overseas, search and bleeding/improvement of microorganisms related to the hydrogen production and utilization technology of biomass have been advancing. For development in this field, it is necessary to construct a widespread research network and promote the comprehensive research and development. In this survey, most of the research institutes visited recognized an importance of international cooperation in this field and agreed to make future research interchanges in a wide range. Based on the survey, a feasibility of concrete international collaboration is searched. 146 refs., 2 figs., 11 tabs.

  10. Survey report for fiscal 1998. Survey of trends of new CO{sub 2} fixation technology using bacteria and algae (II); 1998 nendo chosa hokokusho. Saikin sorui wo riyoshita atarashii nisanka tanso kotei gijutsu no doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The trend of technology is surveyed from a standpoint that, in the process of CO2 fixation using microbes for the production of useful substances, it is essential, in view of income/outgo balance and economy, to utilize their catalytic function. The survey centers about the feasibility of the utilization of organic wastes, cellulose wastes in particular, as an energy source. Special attention is paid to the energy of artificial light and laser beams. From a point of view that it is important to suppress cell multiplication and to effectively utilize only catalytic activity for the production of useful substances, the cell division mechanism of the Corynebacterium is analyzed, and the findings are compiled to facilitate the study as to whether the division may be controlled. A report is also prepared on the metabolic mechanism of a photosynthesizing bacterium that is judged to be the most promising species. Reference is made to aerobic and anaerobic bacteria. Shown are the organic compounds that are formed by CO2 gas fixation thanks to microbial or enzymatic reactions. To emphasize their importance as an energy source and to explain the conversion of biomass into useful substances, the technology and economy of conversion into fuel compounds are surveyed. The production of ethanol out of organic wastes is evaluated in the way of LCA (life cycle assessment). (NEDO)

  11. Fiscal 1997 report on the survey project on planning to execute `The New Earth 21`; 1997 nendo chosa hokokusho (`chikyu saisei keikaku` no jisshi keikaku sakusei ni kansuru chosa jigyo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Japan proposed in the Houston Summit the New Earth 21 to be carried out with technology development and technology transfer, and to make a concrete development of the project, Japan also proposed in the Tokyo Summit a TREE Plan for working out comprehensive strategies of the innovative technology development. In the CO3 Kyoto Conference in 1997, numerical targets for developed countries were determined which have legal binding force for control/reduction of greenhouse gas emissions in the term of 2008-2012. It was agreed to urge developing countries also to play a certain part in the project through the clean development. Therefore, the paper made quantitative analysis of important CO2 prevention technologies, technology transfer costs, and economical assessment by energy conservation. As a model, the DNE 21 model was upgraded and used into which CO2 prevention technologies, energy, economy and climate changes were integrated. In fiscal 1997, the following were carried out: collection of data on important CO2 prevention technologies and systems and analytical assessment using the DNE 21 model, CO2 reduction and selection of energy technology, assessment of energy system costs, construction of the unified DNE 21 model, and opening of the international workshop. 62 refs., 98 figs., 34 tabs.

  12. Fiscal 1997 survey report on the project on energy conservation by effectively using building energy in Indonesia; 1997 nendo chosa hokokusho (Indonesia ni okeru biru energy yuko riyo ni yoru sho energy ka project chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    As an energy conservation method for a model building, the following eight methods were selected and trially calculated of the effects. 1) adoption of high efficient illumination apparatus, 2) introduction of an illuminance control system, 3) cooling water secondary pump with invertor, 4) ventilation control for parking lots, 5) heightening of the established temperature, 6) improvement of the 24-hour run chiller, 7) elevator with invertor, and 8) introduction of the photovoltaic power generation. As a result, it was found out that energy was totally reduced by about 3,837.4 MWh/yr or 25.6%. If viewed from the amount of reduction in greenhouse gas, the amount of CO2 emitted from office buildings, approximately 0.22 million t-C/yr, decreases to approximately 0.16 million t-C/yr. Further, approximately 0.93 million t-C/yr, the amount of CO2 emitted from commercial use facilities such as office buildings, department stores and hotels is reduced to about 0.69 million t-C/yr, thanks to the effect of the project on energy saving buildings, which made a CO2 reduction by approximately 0.24 million t-C/yr possible. Validity of the project on energy conservation in Indonesia was confirmed. 2 refs., 55 figs., 38 tabs.

  13. Research report for fiscal 1998 on the analysis of spread effect of technologies approved as international standards. Value web analysis and research; 1998 nendo kokusai hyojun ni ninteisareta gijutsu no hakyu koka bunseki chosa hokokusho. Value wave bunseki chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For contributing to the formulation of technology development programs, an analysis is conducted based on the concept of value web into which the economic spread effect is incorporated. As information technology plays an important role in the fields of automobiles and chemical materials, there are various fields the research and development efforts exerted in which are common to many others. As to what additional values are created when such separately developed technologies cross each other, a discussion is conducted using techniques of industry-oriented analyses. Findings obtained are mentioned below. When the numbers of essays relative to the respective industries are compared, it is found that 63% of the total number of biotechnological essays fall on agriculture, the drug industry, and the food industry. On the other hand, when it comes to the produce, related industries larger in marketing scale is more strongly influenced by the spread effect. The spread effect of biotechnology is distinguished in the drug industry, and that of information/communication technology in the information industry, electric and electronic industries, and in the semiconductor industry. (NEDO)

  14. Report on survey of international cooperation possibility on chemical CO2 fixation and utilization technology in FY 1997; 1997 nendo chosa hokokusho (kagakuteki CO2 koteika yuko riyo gijutsu ni kakawaru kokusai kyoryoku kanosei chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This survey focused on the end of the more promising companion and promoting the international cooperation on chemical CO2 fixation and utilization technology. As a result, the way of the carrying-forward of the international cooperation with more than one companion could be arranged beforehand. It led to getting an arrangement about a secrecy agreement respectively with Lurgi company and ABB company in Europe, and to providing a catalyst sample developed by RITE to implement an examination by the other party and to show related technical information. In addition, it concluded a cooperation agreement about a total system of the chemical CO2 fixation and utilization technology and methanol synthesis with ZSW. In Australia, negotiation about international cooperation with CSIRO which is a federal research organization and CRC (Cooperative Research Centre) for renewable energy has been started. The ideal circumstances are being ready for the chemical CO2 fixation project for which the international cooperation with the country where the natural energy is rich like Australia is essential when coming to practical use. To do alternating current with further high density in the following year it is desired to build a concrete study cooperation system. 1 fig., 4 tabs.

  15. Survey report for fiscal 1997. Survey on publicity measures for promotion of new energy introduction in Tohoku region; 1997 nendo chosa hokokusho. Tohoku chiiki ni okeru shin energy donyu sokushin koho taisaku chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In order to discuss mainly on publicity measures for how to promote new energy introduction in the Tohoku region, items of information were collected and put into order for the state of utilization of new energies in this region, and fundamental materials were prepared. Facilities having introduced new energies by public bodies in the Tohoku area include the prefectural office buildings, town and village office buildings, schools, community centers, welfare facilities such as aged people's centers and hospitals, sports facilities, parks, sewage treatment plants, and refuse incineration plants. The actual record of the introduction in the Tohoku region shows greater number of cases utilizing natural energies. Utilization of recycled energy and high-efficiency energy such as regional heat supply is less because of fewer number of areas built up densely with buildings and factories, with exception of some cases of utilization by the consumer sector. Introduction of clean energy fueled automobiles is little excepting electric vehicles used by the electric power company. Number of natural gas fueled automobiles that have been introduced is few because the infrastructural build-up has not been advanced in the natural gas supply network. (NEDO)

  16. FY 1997 report on the research study for preparation of NEDO`s vision. Biomass energy; 1997 nendo chosa hokokusho (NEDO vision sakutei ni muketa chosa kenkyu). Biomass energy ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Research study was made on the current usage, technological development and future subjects of biomass energy. The current use of biomass energy over the world estimated to be nearly a billion t/y oil equivalent. This value is estimated to be only a part of a pure primary biomass yield of 73 billion t/y oil equivalent showing a large supply potential. The evaluation result of a biomass energy potential in the world by GLUE (Global Land Use and Energy Model) considering worldwide biomass flow and competition of land use showed that no change of land use form in advanced areas is predicted, and no production of new biomass energy from forests in advancing areas is also expected. Production of biomass energy from farm products is promising in advanced areas, while the potential of biomass residue is high in advancing areas showing the possibility of energy development. Development of new biotechnologies such as molecular control of bio-production functions is expected to increase biomass resources. 76 refs., 26 figs., 30 tabs.

  17. Survey report for fiscal 1998 on the survey on preparation of data collection related to new energy technology development (wind power generation ); 1998 nendo shin energy gijutsu kaihatsu kankei data shu sakusei chosa (furyoku hatsuden) chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    As a result of heightening consciousness on assurance of energy security and global environment problems in recent years, it is urged in Japan to promote development of technologies to introduce and proliferate new energies, and work on acceleration of the introduction. On the other hand, in order to move forward effectively the introduction promoting project intended of proliferation and enlightenment, it is necessary to put into order comprehensively and systematically the different data on the new energies, and summarize them as the basic data. This report, focusing on a wind power generation system, collects and puts into order the latest published data on the wind power generation system, placing in the center the introduction examples in Japan and other countries, supporting measures, wind power generation system markets, and the specifications of major windmills. The major contents may be summarized as follows: significance of introducing the wind power generation system, the current status of the market, policies in different countries, status of introducing the system in other countries, subsidy institutions for the introduction, the introduction flow, efforts made by government related organizations and local governments, a list of window offices of the related corporations, the fundamental knowledge, and the movements in 1998. (NEDO)

  18. Outline of investigation on restraint of carbon dioxide generation by green chemistry. 1999.1-1999.3; 1998 nendo green chemistry ni yoru CO2 hassei yokusei ni kakawaru chosa kenkyu chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Investigations were conducted into the above in some leading OECD (Organization for Economic Cooperation and Development) member states. Green chemistry is a new concept in which clean technology, environment-friendly chemistry, and the like are combined, and is a chemical solution for reducing or stopping the use or generation of materials, products, by-products, solvents, reagents, etc., which are dangerous to health and environments, throughout the whole life cycle of chemicals covering the processes of their designing, manufacturing, dumping, and recycling. In this fiscal year, the actual state of the generation of biomass, regarded as representative of reproducible materials, and its feasibility as chemical resources were investigated. In an effort at finding out chemical reactions safer to health and causing less environmental impact, investigations were also conducted into the recent trends of catalysts, novel reactions for organic syntheses, use of supercritical fluids, photocatalysts, biomimetic processes, etc. The development of substitutes for plastic additives was also studied. Since acceptance by the citizenry is quite important for green chemistry to take effect, educating and enlightening activities in the U.S., Britain, France, and Germany were inquired into. (NEDO)

  19. Survey report 1998. Survey on actual condition of science parks and similar facilities in Asian countries; 1998 nendo chosa hokokusho. Asia shokoku chiiki ni okeru science park nado no jittai chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Implemented at NEDO, on such technical development issues peculiar to developing nations as are difficult to solve by their research and development ability alone, has been a consistent research cooperation with countries in question, such as installation of plants and research facilities, joint research operation, and training of researchers, while Japanese technological skill and research and development know how are utilized, as the international cooperation projects. In this survey, an actual condition was investigated including potential of science parks and similar facilities in Asian countries (Thailand, Indonesia, Malaysia and India), for the purpose of unearthing the needs, seeds, etc., of the future international research cooperation projects. The parks and facilities selected for the survey are as follows. The Thai technology/science parks are the Thai Science Park and four other parks; the Indonesian technology parks are Bukit Indah Industrial City and eleven other parks; the major Malaysian technology parks are Technology Park Malaysia and fourteen other parks; the major Indian technology parks are Electronics City and fifteen other parks. (NEDO)

  20. Fiscal 1997 survey report on technology to reduce the amount of greenhouse gas emitted from automobiles; 1997 nendo chosa hokokusho (jidosha kara no onshitsu koka gas haishutsuryo teigen gijutsu no chosa). 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    As to intelligent transport systems (ITS), the paper views the outline of the R and D and diffusion in Europe, the U.S. and Japan and trially estimated the effect of reduction in greenhouse gas, and worked out visions/scenario for diffusion of ITS. As developmental fields contributing to reduction in greenhouse gas, the following were taken up: 1) AVCS (advanced vehicle control system), 2) automatic rates receiving system, 3) traffic management, 4) plans of operation management/allocation of commercial cars, 5) modal shift of the material flow, and 6) public traffic in passenger transportation. As effects by developmental field, 1) and 5) are especially effective. 4) is promising because of its easiness in introduction, and 2) is also a promising technology as a tool to introduce an electronic road pricing system on general roads in future in addition to the effect of reducing heavy traffic by its introduction to expressways. However, the higher the service level on the facility side becomes, the more the traffic demand amount becomes. By how to introduce ITS, it possibly occurs that improvement of the situation will not be made at all on the future vehicle traffic system. 38 refs., 42 figs., 52 tabs.

  1. Report of the results of the fiscal 1997 survey. R and D of high efficiency clean energy vehicles; 1997 nendo chosa hokokusho. Kokoritsu clean energy jidosha no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For the purpose of developing an automobile which keeps low pollution using petroleum substituting clean energy, decreases the running energy consumption to a half at least, and reduces the CO2 emission to less than a half of the conventional one at the same time, the R and D started in fiscal 1997. As to the study of a high efficiency hybrid power system, conducted were the prediction of fuel consumption performance of the system proposed, evaluation of element technology using hybrid simulator, evaluation experiment on a new hybrid vehicle, and grasp of overseas trends. In relation to the development of hybrid vehicles, the following were studied: methanol fuel cell loading hybrid vehicle, CNG engine loading hybrid vehicle, CNG ceramic engine loading hybrid truck, CNG lean burn engine loading hybrid truck, LNG engine loading hybrid bus, and DME engine loading hybrid bus. Besides, a survey on synthetic fuel and the related survey were carried out. 17 refs., 185 figs., 101 tabs.

  2. Fiscal 2000 survey report on the survey and research on green technology industry; 2000 nendo green technology industry ni kansuru chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The approaches of the Government and local autonomies to green technologies are surveyed toward the construction of a green technology industry. The present activities and future outlook of environmental industries interested in green technologies are surveyed and examined, the green technologies here including (1) energy conservation measures and development of non-fossil fuels, (2) energy-related and environmental measures for countering global warming, (3) waste treatment measures for countering dioxins and endocrine disrupters. A survey is conducted of the outlines and future trends of green technology related important studies now under way at laboratories and research institutes of universities, the Government, and private-sector corporations. Based on the results of the surveys, important subjects of technical development in green technologies are extracted and studied for the possibility and outlook of their practical application. Tasks to discharge and problems to occur before they are introduced to the market are also evaluated and confirmed. Based on the results of the research and development of green technologies, actualities of environmental industries are taken up, and the problems and tasks to be settled before environmental technologies are introduced to the market are investigated and studied. (NEDO)

  3. Report on the FY 1989 potential survey of overseas coal development. Coal fields in Indonesia; 1989 nendo kaigaitan kaihatsu kanosei chosa hokokusho. Indonesia kyowakoku kaku tanden

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1989-12-01

    This survey is aimed at acquiring the basic data required for judging a possibility of development/import of steam coal in Indonesia (west of Java, north of Sumatra and west of Sumatra). Areas for survey are Meulaboh coal field in north Sumatra, Ombilin III area in West Sumatra, and Bayah coal field in West Java. The survey includes the field survey to grasp the situation of coal seam existence, coal quality, coal amount, etc. and activities for collecting the related data and information from the organizations concerned. The Meulaboh coal field has a technical possibility of open pit mining of medium scale. However, the heating value is extremely low, around 4,300 kcal/kg. Judging from this coal quality, there is no possibility of exporting it. It can be said that Ombilin coal is the world's top class steam coal. Accordingly, the demand can be expected both in export use and domestic use. As to Bayah coal, Bemmelen (1949) concluded that the coal was extremely excellent in quality, but had great disadvantages such as thin coal seam, discontinuity, and complicated geological structure. To date, the conclusion has been unchanged. (NEDO)

  4. Fiscal 1996 report on the committee for international collaborative research of medical and welfare apparatus; 1996 nendo chosa hokokusho (iryo fukushi kiki kokusai kyodo kenkyu jigyo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    From a viewpoint that cancer, cerebral hemorrhage, heart disease, etc. caused by the progress in aging are problems not only to Japan but to all developed countries, a possibility of Japan`s joint study with other countries was examined to promote efficiently and effectively research/development of the apparatus required. Moreover, from a viewpoint of being the same Asian countries, a possibility of the joint study was examined also with developing countries which are largely different in disease structure and environment of the use of apparatus from developed countries. In the examination on medical/welfare apparatus technology of China, before the site examination, a book of data was arranged on the actual state of population and disease structure and the R and D situation of medical/welfare apparatus in Japan, and at the same time, celebrated persons in China were introduced by the scientific society side as widely as possible. By this preliminary study, the original objective of the examination could be achieved. In the examination with the U.S. and Europe, Japan held meetings with engineers of the U.K., France and the U.S. Japan`s `load control type walking supporting apparatus,` of which the development was finished, was very highly evaluated by each organ of the countries

  5. Report on preceding researches in fiscal 1998 on the survey and research on conjugate materials; 1998 nendo conjugate material no chosa kenkyu sendo kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Research and development has been made on the 'conjugate materials (CM)' , the innovative materials in which ultra fine inorganic and organic structural units of molecular levels are introduced to be oriented regularly in glass matrix to respond to external force conjugately. The current fiscal year reported items having been made clear by further surveys and researches on CM as proposed by the fundamental surveys having been done as the second year. Section 1 summarizes significance of the research and development; Section 2 reports the result of the CM research and survey and the subjects related to application areas of CM; Section 3 reports the result of the CM market research performed newly in the current fiscal year; Section 4 reports the contents and result of the questionnaire survey to glass related small enterprises as to what interest these enterprises will have upon assuming that these CM products have been realized; Section 5 reports the result of surveys on patents and literatures related to photonics; and Section 6 states future problems in the CM research and development, and summarizes the future prospects of CM. (NEDO)

  6. Report on the fiscal 1996 research cooperation promotion project, `the research cooperation diagnosis survey`; 1996 nendo kenkyu kyoryoku jigyo `kenkyu kyoryoku shindan chosa` hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    A diagnosis survey was conducted for Japan to cooperate in researching subjects on technical development in developing countries. In fiscal 1996, surveys were made on the following: (1) establishment of the industrial base (Vietnam), (2) preservation of biological diversification and the continuous utilization (Brazil), (3) fostering of the industry of automobile parts (Thailand), (4) finding out of items on environment related fields (India), (5) environmental response type system for effective use of water resource (the Philippines), (6) small size geothermal exploration in remote islands (Indonesia). (1) is research cooperation for welding technology, powder metallurgy technology, hypoid gear manufacturing technology, and iron making technology by the direct reduction method. In (2), research/development are conducted in cooperation with research institutes in Brazil on survey/identification/utilization of bioactive substances from biological resources in Brazil. In (4), an examination was made of the seeds for research cooperation in technical fields such as environment and energy. Having a strong relation with the industrial circle, SCIR is carrying out researches on aerospace, petrochemical, biology, electronics, medicines/drug, etc., which indicated fulfillment of intellectual infrastructure in India. 52 figs.

  7. Survey report on the development/utilization of petroleum substitution energy in the Pacific region; Taiheiyo chiiki sekiyu daitai energy kaihatsu riyo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper collected/analyzed data on petroleum substitution energy in the Pacific region. In fiscal 1996, in addition to collection of the existing energy data, conducted were collection of energy data made retroactive from 1971, and time-series collection of the energy related expanded data including energy related production statistics/social statistics, energy consumption amount by industry, power generation facilities, oil production facilities, and environmental data. As to petroleum substitution energy, the paper took up new energy such as hydroelectric, nuclear, geothermal, photovoltaic, and wind power generation, and commercial-base renewable energy. As a result of the analysis, the supply of petroleum substitution energy in the whole Pacific region has been stable, 6.6% during 1980-1990, 7.4% in the first half of the 1990s, largely over the primary energy supply. The supply of nuclear power was overwhelmingly large, followed by hydroelectric energy and geothermal/new energy. 15 figs., 23 tabs.

  8. Fiscal 1997 report on the results of the verification survey of a new load leveling method; Fuka heijunka shinshuho jissho chosa (1997 nendo seika hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    A study was conducted of a practical applicability of the electric double layer capacitor as a new electric power storage technique. In the study, a comparison was made between the capacitor system and the NAS battery which is most commercialized as one for power storage of all the secondary batteries. The capacitor system is excellent in cycle life, system efficiency, and safety/environment, but in energy density it is approximately a tenth of that of the NAS battery so far. The capacitor system, however, is high in filling rate in modules and enables compact design. As to the 35 fabricated electric double layer capacitor cells, the following tests were carried out: charge and discharge, internal resistance measurement, energy density measurement, characteristics of charge/discharge efficiency, self-discharge characteristics, and characteristics of circumferential temperature. As a result of the tests, the cell with volume energy density of 16.4-16.8 Wh/L was fixed to the module with a filling rate of about 93% and achieved an energy density of 15 Wh/L. 26 refs., 175 figs., 75 tabs.

  9. Research report for fiscal 1998 on regional new energy vision drawn up for Tokushima Prefecture; 1998 nendo Tokushimaken shin energy vision sakutei chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The amount of energy in existence is theoretically the amount of energy that exists in a given region while the available amount is an amount of energy worked out with technological, economic, and social conditions taken into consideration. The total of the amount in existence and that of the available amount are mentioned in a table, and the available amount is further shown in terms of calorie. It totals 11,120Tcal per year, which is equivalent to approximately 55% of the whole amount of energy that Tokushima Prefecture demands. The availability of each type of new energy and the state of development of related technologies are studied to determine what priority is to be given to what energy. The group that is given the highest priority consists of photovoltaic power generation, passive solar systems, refuse fueled power generation, and heat from wastes (this group occupying more than 80% of the available amount in Tokushima Prefecture). The second group consists of wind power generation, clean energy vehicles, cogeneration, and small and medium scale hydroelectric power generation. The third group consists of fuel cells, ocean energy, biomass, and temperature difference energy. Natural conditions surrounding new energy in existence in Tokushima Prefecture are rather favorable, but social conditions are not. (NEDO)

  10. Report for fiscal 1998 on the international joint research project of medical welfare equipment; Iryo fukushi kiki kokusai kyodo kenkyu jigyo 1998 nendo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    In connection with the international joint research project of medical welfare, a report was made on the results of the investigation conducted in 1998 concerning the technology of overseas medical welfare equipment. In the investigation of china, observation was made on the actual state of the representative medial institutions, with opinions exchanged. Obsolete equipment and old technology are the present state in China, which is strongly desirous of exchanging information with Japan. In Taiwan, being full of venture spirit, an ultrasonic thermal treatment apparatus and an ultrasonic echo device have been produced for example. In Europe, an observation tour was conducted on a German manipulator and process robot while an investigative visit and exchange of opinions were made on the living environment and facilities in Italian training center for physically handicapped persons. Japan's self-supporting and assisting system for excretion attracted many questions and comments. In the investigation in the U.S., views were exchanged concerning '{sup 13}C-MRS device for non-invasion brain metabolic measurement' in research institutions such as universities. A machine developed in Japan received a high evaluation in that {sup 13}C spectrum was obtained from a substantial depth. (NEDO)

  11. Fiscal 1995 verification survey of geothermal exploration technology. Report on a deep geothermal resource survey; 1995 nendo chinetsu tansa gijutsu nado kensho chosa. Shinbu chinetsu shigen hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-06-01

    For the purpose of reducing the risk of deep geothermal resource development, the paper investigated three factors for the formation of geothermal resource in the deep underground, that is, heat supply from heat source, supply of geothermal fluids, and the developmental status of fracture systems forming reservoir structures. The survey further clarified the status of existence of deep geothermal resource and the whole image of the geothermal system including shallow geothermal energy in order to research/study usability of deep geothermal resource. In the deep geothermal resource survey, drilling/examination were made of a deep geothermal exploration well (`WD-1,` target depth: approximately 3,000-4,000m) in the already developed area, with the aim of making rationalized promotion of the geothermal development. And the status of existence of deep geothermal resource and the whole image of the geothermal system were clarified to investigate/study usability of the geothermal system. In fiscal 1995, `WD-1` in the Kakkonda area reached a depth of 3,729m. By this, surveys were made to grasp the whole image of the shallow-deep geothermal system and to obtain basic data for researching usability of deep geothermal resource. 22 refs., 531 figs., 136 tabs.

  12. Research report of fiscal 1997. Study on profitability evaluation technique for waste power generation; 1997 nendo chosa hokokusho. Haikibutsu hatsuden ni kansuru keizaisei hyoka shuho no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For diffusion of waste power generation, cost reduction is important. As the profitability evaluation technique for conventional waste power systems, a simple recovery year method, total waste treatment cost method, generation cost method, and evaluation method by accumulated balance sheet are presented along with their principles. For the generation cost method, trial calculation results are presented based on documents reported. From methods for the study in Institute of Applied Energy, some estimation methods of construction cost are presented, and generation cost and profitability evaluation were studied by parametric accumulation method. The profitability was calculated for RDF power systems, and it was clarified that although as a whole this system is more efficient than a simple refuse incineration system, the balance sheet of local governments is dependent on a responsibility range for the facility. In a combined type (super refuse power generation), generally municipalities bear a combustor and boiler, while a prefecture bears generation facilities. Because of large scale generation, the profitability is dependent on a selling price of electricity. 37 refs., 36 figs., 24 tabs.

  13. Report on surveys about the effects of introduction of CGT vehicles and eco-motors; CGT sha oyobi eco-motor donyu koka chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Studies and discussion are made about the environmentally-friendly vehicle (eco-motor) which will be the typical next-generation automobile. The surveys cover the electric vehicle, fuel cell-powered vehicle, hybrid vehicle, methanol-powered vehicle, natural gas-powered vehicle, CGT (ceramic gas turbine) vehicle, hydrogen-powered vehicle, gasoline-powered vehicle, direct injection type gasoline-powered vehicle, and the diesel vehicle. Fuel consumption rates are determined with the aid of the latest technological information, etc., and the CO2 emission rates and heat generation rates are calculated. In addition, the effect on reduction in CO2 emission is predicted in case of eco-motor introduction in the future. Furthermore, a surveys is conducted about national projects for the development of eco-motors, and the intention of automobile manufactures, in Japan, the U.S., and Europe. As the result of the survey and studies that follow, it is found that a large-scale introduction of eco-motors will achieve a great reduction in CO2 emission because the electric vehicle, fuel cell-powered vehicle, and the hybrid vehicle emit less CO2 than the gasoline-powered type now in service. 17 refs., 13 figs., 48 tabs.

  14. Research report for fiscal 1998. Research into the trends of low-carbon automotive fuel manufacturing technologies; 1998 nendo jidoshayo teitanso nenryo no seizo gijutsu doko chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Studies are made of optimum materials and methods for manufacturing low-carbon fuels for reduction in greenhouse gas emissions. When their thermal dynamic limits and the technological maturity are considered, it is inferred that no extensive improvement will be achieved by merely improving on the efficiency of the existing fuels. The use of various high-efficiency driving power sources utterly different in mechanism from the conventional ones, such as those for fuel cell-powered automobiles, and the promotion of the use of low-carbon fuels such as methanol and methane for all kinds of driving power sources including those for the said fuel cell-powered automobiles, will become necessary. The use will also be necessary of recyclable materials. The biomass resources, in particular, since they absorb CO2 gas in their growing process by virtue of photosynthesis, may be said to be free of CO2 gas emissions. They have their own problems, however, which involve the economy of energy consumed for their production, harvesting, transportation, and conversion into fuels. It is therefore required that their whole life cycle be studied before their greenhouse gas reduction effect may be correctly assessed. The quantities of resources available for the production of automotive low-carbon fuels, manufacturing technologies, etc., are first of all put in order for easy perusal. An effective way is assessed for the whole including the life cycle. (NEDO)

  15. Fiscal 1997 survey report on international cooperation for the energy use rationalization method; 1997 nendo jigyo hokokusho (energy shiyo gorika shuho kokusai kyoryoku chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    To carry out LCA in ISO-14040, inventory analysis (IA) is the basic. For studying arrangement of public data to carry out IA, collection work was done of background data which are indirectly concerned with copying machine. First, methods to make inventory data (ID) which are thinkable in the present situation were prepared, and items of emitted matters to be collected were set up in relation to the impact assessment method. Secondly, scenarios of each stage of life cycle of copying machine were set up, and virtual data on the material/energy consumption amount were arranged. Based on this, a method was further studied for making ID of the parts used in electric power, iron/steel, plastics, and copying machine. Third, based on the above-mentioned study results, ID was actually made, and a possibility was studied of making inventory in life cycle of copying machine. Moreover, the state of the automobile LCA carried out at Stuttgart University was examined. At last, the paper summed up subjects of and future study methods for the inventory making method. 2 refs., 25 figs., 77 tabs.

  16. Fiscal 1998 research report on development, study and evaluation of tribo-materials; 1998 nendo tribo material no kaihatsu chosa hyoka hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Recently, needs for tribo-materials are on the increase for further energy saving and improvement of various functions and durability in various field such as less-fuel consumption car, new type Shinkansen, linear motor car, high-speed motor boat, various machines and tools, electronics, medical equipment and vitally adaptable material. This project researches and studies various properties required for tribo- materials for surface treated materials by ceramic and other material films, and clarifies the guidance and direction of the technology for creating tribo-materials by surface treatment and surface modification, through clarifying a friction/abrasion mechanism by collection of basic characteristic data and analysis of abrasion powders. This project is studying the marginal condition of film destruction for ceramic system vapor-phase deposited films, through studying the effect of mechanical properties of substrates, film surface treatment methods and film surface shapes on the marginal condition. (NEDO)

  17. Fiscal 1998 research report on new recycling technology for waste lube oil; 1998 nendo haijunkatsuyu no recycle no shingijutsu ni kansuru chosa kenkyu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For effective use of resources and environment conservation, R and D was made on recycling technology for recovered waste lube oil. On the R and D on removal of ash and chlorine contents in waste lube oil, iron oxide-carbon composite was found as adsorbent which can reduce ash content and chlorine content to 0.02wt% and 5ppm, respectively. On the research on the applicability of waste lube oil as melting furnace fuel for bottom ash and fly ash, as the melting experiment result at a real plant, the recycled heavy oil obtained by simple treatment of waste lube oil showed dioxin decomposition rates more than 99.9% and dioxin concentrations less than 0.6ngTEQ/Nm{sup 3} in waste gas, achieving the targets regulated by Air Pollution Control Law. The applicability of waste lube oil as fuel was thus confirmed. On the research on the applicability of waste lube oil as fuel for power generation in oil refineries, both waste lube oil alone and mixed oil with residual oil were available as gasification fuel through design considering ash content removal, and reasonable selection of equipment and piping materials considering chlorine. (NEDO)

  18. Report on current status of petroleum substituting energy development in the EU in FY 1997; 1997 nendo chosa hokokusho (sekiyu daitai energy kaihatsu no genjo (EU))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The EU is one of the most advanced places of petroleum substituting energy development. The EU is highly aware of environmental issues. For the COP3 held at Kyoto in December 1997, The EU gave more severe regulation of CO2 emission than the other advanced countries. The EU takes efforts in the development and introduction of energy effective for global environmental protection. In addition, research and development of geothermal, biomass and wave force energy are actively promoted in this place. Energy situations in this place are significant for predicting and analyzing the future trends of energy development and consumption in the other countries. Firstly, this report looks back toward energy demand held in check to a head at the beginning of the 1990`s. Secondly, supply of energy and cover of energy trend are described for recent years from the point of view. Thirdly, competitiveness of energy in EU countries are discussed from a position of energy density. Fourthly, circumstances about environmental issues are considered. Fifthly, the world market of energy is also considered. Finally, development of new energy and a trend of introduction with a sample of Sweden are introduced. 13 refs., 15 figs., 28 tabs.

  19. FY 1998 annual report on power generation by waste heat from cement production in China; Chugoku ni okeru cement hainetsu hatsuden 1998 nendo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This project is to implement a feasibility study for applying waste heat power generation, which have been already commercialized in Japan and producing remarkable results, to China's cement plants producing 3,500 t/d or more of clinker, and thereby to try to establish a link with the Japan's clean development mechanism. It is expected that introduction of these systems improves energy use efficiency and environments in China. The study results indicate that the project for a Tongling Conch plant could generate power of 15,000 kW, reducing CO2 emissions by 89,178 t/y and cumulatively 1,783,560 tons in the 20-year period. The results also indicate that the project will be highly profitable, with an estimated internal return rate of as high as 33.78%. The project for a Huaxin plant could generate power of 8,400 kW, reducing CO2 emissions by 48,412 t/y and cumulatively 968,240 tons in the 20-year period, annually saving power charges by 325 million yen and bringing an internal return rate of 10.72%. (NEDO)

  20. Report on current status of petroleum substituting energy development in the USA in FY 1997; 1997 nendo chosa hokokusho (sekiyu daitai energy kaihatsu no genjo (Beikoku))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In the last twenty-five years, the level of social recognition for the importance of energy conservation grew progressively from a total nonexistence of concern to the driving force that ensures the future environmental health of the nation and the world. Executive Order 12003, relating to energy policy and conservation, was signed by President Jimmy Carter and dated July 20, 1977. In 1992, President Clinton issued Executive Order 12759 - federal Energy Management. Each agency will prescribe policies under which its industrial facilities in the aggregate increase energy efficiency by at least 20% in fiscal 2000 in comparison to fiscal 1985. Current Federal programs for building efficiency are estimated to result in 31.5 billion dollars in annual energy saving for consumers by 2010. Future trends attract attention. The major programs currently in force to implement these policies and directives include Rebuild America, Million Solar Roofs Initiative, Home Energy Rating Systems, and Weatherization Assistance Program. 37 refs., 1 fig., 6 tabs.

  1. Report on the fiscal 1995 research cooperation promotion project, `the research cooperation diagnosis survey`; 1995 nendo kenkyu kyoryoku suishin jigyo `kenkyu kyoryoku shindan chosa` hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    A diagnosis survey was conducted for Japan to cooperate in researching subjects on technical development in developing countries. In fiscal 1995, surveys were made on the following: (1) recycling technology of biomass industrial waste in the tropical region, (2) small size geothermal exploration in remote islands, (3) waste water recycling system using activated carbon, etc., (4) upgrading of proofreading technology of measuring standards, (5) technology to simply set up conditions for forming engineering plastics, (6) assessment of safety of chemical substances. In (1), energy and useful matters are recovered from oil palm of Indonesia by thermal decomposition technology. In (2), a system is constructed which can effectively explore geothermal energy in remote islands in the east Indonesia. As to (3), a survey is conducted in the Philippines. (4) contributes to upgrading of length measuring standards in Thailand. (5) attempts to improve technology of forming engineering plastics. In (6), research cooperation is made for preventing environmental pollution and health damage by chemical substances from happening in Thailand and for technology for assessing safety of chemical substances which contributes to the proper use of the hazardous material law in Thailand. 28 figs.

  2. Report on the survey for working out the new energy vision of the Neba village area; 2001 nendo Neba mura chiiki shin energy vision sakutei chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-03-01

    For the purpose of promoting the introduction of new energy and enhancing the awareness of it in Neba Village, Nagano Prefecture, an investigational study was conducted of characteristics of the natural environment/characteristics of social economy of the village, existence amount of new energy, project for new energy introduction, etc., and a vision was worked out. Neba Village is surrounded by 1,000m class height mountains and wedge valleys with a lot of undulations and has a key road running through the village. The population was 1,532 as of April 1996, which continues decreasing. The problem on the decrease in number of child is conspicuous. As the project for new energy introduction, the following were studied: introduction of photovoltaic power generation facilities to city/farm village interchange facilities (Nebaland), introduction of photovoltaic power generation facilities to kindergarten/elementary school/junior high school for educational purposes, introduction of small wind power generation facilities to pottery facilities and lodging facilities, introduction of mini-hydroelectric power generation along the Neba River and electric power supply to wood processing facilities, methane gas fermentation cogeneration using stockbreeding waste and garbage, ligneous biomass cogeneration using waste wood, etc. (NEDO)

  3. Report on the survey for working out the new energy vision of the Urugi village area; 2001 nendo Urugi mura chiiki shin energy vision sakutei chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-03-01

    For the purpose of promoting the introduction of new energy and enhancing the awareness of it at Urugi Village, Nagano Prefecture, an investigational study was conducted of characteristics of the natural environment/characteristics of social economy of the village, existence amount of new energy, project for new energy introduction, etc., and a vision was worked out. Urugi Village is 800 meters above sea level and in the riches of the Nature being surrounded by mountains on all sides. The population of the village was 734 as of March 1993, which is decreasing by 14-15/y. The aging rate was very high, 32.3%. As the project for new energy introduction, the following were studied: 10kW class photovoltaic power generation facilities to be installed at Furusato-kan and by the road of Hiraya Pass, 2.5kW class wind power generation facilities to be installed at Hiraya Pass for education of new energy, installation of a 10kW class mini hydroelectric power plant supplying power to the auto-camping site, stockbreeding biomass cogeneration which conducts fermentation of the methane from animal feces and garbage generated in Urugi Village, ligneous biomass cogeneration, etc. (NEDO)

  4. Fiscal 1997 report on the results of the international standardization R and D. Overall survey; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Sogo chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper summed up the results of the survey of tackling with the international standardization by enterprises and organizations involved in the standardization in the U.S., Europe and Japan, the results of the R and D on 20 themes for the international standardization, and the development toward the international standardization. As the R and D themes, the following were selected: the development of chemical method to analyze/evaluate metallic coatings of surface treated steel coating sheets, R and D of the basic evaluation method of functional composite particles, international standards for computer/manikins, basic technology of color image management, study on optimizing design/evaluation technology using quality engineering, study of the international standardization by economic evaluation of environmental impacts, R and D of the standardization of a method to test acceleration life of phosphorous acid fuel cells, development of a test method of halogen-free flame-retardant cables and a study of the cable standards, standard measuring methods of hormone effects of chemical substances, quantification of the sensory evaluation and international standardization in the paint field, experimental study on the international standardization for immunochemical measurement of chemical substances, etc. 24 figs., 16 tabs.

  5. Report on a feasibility study of making an international joint research on energy in the Asia region; Asia chiiki kokusai kyodo kenkyu kanosei chosa hokokusho. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    A survey was conducted on the energy situation in Thailand, Indonesia, Malaysia, the Philippines and India, and a possibility of making an international joint research. Thailand has sharply increased investments from Europe and the U.S. since 1985, and has been making a rapid industrialization. As to the energy policy, it is important to secure the stable supply and stabilize the price. Indonesia has been rapidly increasing energy consumption in accordance with the recent economic growth, and is fear of becoming a net oil importing country in the near future. They are taking a policy for securing as much domestic oil and gas as possible. Malaysia has been keeping a high growth of over 8% per year for the past 8 years and rapidly increased energy demand. It is expected that they will maintain a high level of the development of energy resources. In the Philippines, the industrial energy is mostly coal, but electricity expected in future is from the oil-fueled power generation. The stable import of oil is a problem. 45 figs., 51 tabs.

  6. 1998 Annual Study Report. New industry supporting type international standard development program (Comprehensive survey); 1998 nendo seika hokokusho. Shinki sangyo shiengata kokusai hyojun kaihatsu jigyo (sogo chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Summarized herein are results of the survey on a total of 13 themes for international standardization. These themes are for standardization of (1) color control, (2) securing interoperability between optical disk systems, (3) digital image processing for home digital electronic appliances, (4) securing interconnectability between home electronic information appliances, (5) production process systems, (6) testing and evaluation methods for fine ceramic materials for communications, (7) evaluation methods for high-temperature properties of new glass melts, (8) corrosion testing and evaluation methods for surface-treated steel plates, (9) testing and evaluation methods for high-purity titanium, (10) testing and evaluation methods for plastic optical fibers, (11) evaluation methods for high-strength, large-size steel pipe characteristics for superhigh-pressure natural gas pipelines, (12) methods for measuring mileage of hybrid electric vehicles, and (13) methods for determining recycle ratios of automobile components. This comprehensive survey also includes overseas trends for the standardization, establishment/expansion of the international standardization processes, and standardization for determining recycle ratios of home electric appliances. (NEDO)

  7. Report on investigation of initial stage of energy-saving vision in Ikeda City region; Ikedashi sho energy vision shoki dankai chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Investigation was conducted for the purpose of deciding energy-saving vision in the region of Ikeda City, Osaka Prefecture. Ikeda City is lower in the use of electric lights per household than Osaka Prefecture or the whole country, and is higher in the consumption of city gas. The carbon dioxide exhaust of the City is less compared with that of Osaka Prefecture or the whole country. As to new energy, there is a good possibility of the use of solar energy. As a result of energy conservation diagnosis, about 25% energy saving was found possible in the government office building jointly used by the City and the Prefecture, and 21% in Kitateshima Junior High School. From these investigative results, proposals were made for the basic policy of the energy saving vision; they were, for example, to enrich one's life style by promoting efficient use of energy, to build an urban structure having less energy load, to enhance all citizens' consciousness about energy, to change the way of living by the community unit, to take the lead in energy conservation as the city administration to set an example for the whole city, to foster the environmental industry by dealing with energy problems, and to have a long-term outlook and tackle the issue with stress placed on feasible projects. (NEDO)

  8. Research on the general analytical method of fossil fuel cycle from a viewpoint of the global environment. 3; Chikyu kankyo kara mita sogoteki kaseki nenryo cycle bunseki hyoka shuho no chosa. 3

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The general analysis/assessment method of a fossil fuel cycle was studied. Seven kinds of power generation plants such as LNG cycle and coal cycle ones, and four kinds of transport and treatment systems of recovered CO2 such as ocean and underground systems were studied as case studies on life cycle analysis. As data necessary for life cycle analysis, the database was constructed which stores the facilities and operational energy required for a total energy system from mining of fossil fuel to treatment of recovered CO2, and the quantity of environmental waste such as CO2 emission. As a result, the decrease rate of energy balance defined as ratio of input energy to power plant output was estimated to be 14-43% and 20-60% in LNG cycle and coal cycle, respectively. Even if the recovery rate of CO2 in power plants reached 80-90%, reduction of total CO2 emission was limited to only 20-40% because of CO2 emission during mining, liquefaction and transport of fuel. 168 refs., 48 figs., 102 tabs.

  9. Review of methods for long term monitoring of the environmental effects of geothermal development (hot spring). part 2. Chinetsu kaihatsu ni kakawaru choki kankyo monitoring donyu chosa. 2 (chikasui onsen(center dot)suishitsukei). ; Data sheet shu

    Energy Technology Data Exchange (ETDEWEB)

    1990-03-01

    Pertaining to the geothermal development, this is a data sheet collection of domestic and foreign review documentation to establish environmental monitoring system. Global chemistry and physics review comprise examples in Shikano Hot Spring in Tottori Prefecture, deep portion in Shimosuwa region, etc. Hydrologic fluidization study of geothermal water system explained Kakkonda, Matsukawa, Sengan region, Asaseishikawa fault, Tateshina highland, Hakone Yumot, Beppu, etc. Apart, simulation is being made by geothermal structure model. As for the content of hot spring water, there are review results from Noboribetsu, Izu/Hakone, Shimabara, Beppu, etc. Relation between the discharge flow rate of hot spring and rainfall quantity comprises examples in Onikobe, Kusatsu, etc. As for the influence of hot spring development, secular statistic is made of the dynamic water level, temperature and quality of hot spring in Aomori, Bunpi, etc. Influence review of power generation plant installation comprises reports from Hatchobaru, Onikobe, Onuma, Mori, etc. Regarding the geothermal development and environmental assessment, study is made of the scenery, water quality, atmospheric pollution, land subsidence, hot spring exhaustion, change in hydrothermal system, etc. Foreign examples were also explained. 121 figs., 14 tabs.

  10. Research report for fiscal 1998. Research into the feasibility of exchange of studies for the development and promotion of global environment-related industrial technologies; 1998 nendo chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo. Kenkyu koryu kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The above was conducted by Research Institute of Innovative Technology for the Earth (RITE). Worldwide collaboration is mandatory for the settlement of environmental problems for the earth, and RITE is positively promoting its interaction with research institutes abroad. In fiscal 1998, it sent research teams to government organizations and research institutes in Europe and America for studies there. A study in Europe involved the preparation of chemicals from CO2 by virtue of novel biotic reactions, and RITE's microbial molecular function laboratory plans to start a leading study in fiscal 1999. In relation with environmental impact reducing technologies using sunlight-aided photocatalysts, visits were paid to three research institutes in America. RITE itself has developed a powdered semiconductor catalyst and is engaged in the study of producing hydrogen by decomposition of water using solar energy. Concerning the production of saccharides out of farm wastes remaining unused, researches were made into the feasibility of joint studies with some advanced research institutes in America. Discussions were made about the performance- and stability-related improvement of enzymes usable for the decomposition of biomass, the analysis of biological environmental circumstances that substance yielding microbes find themselves in under anaerobic conditions, etc. (NEDO)

  11. Investigational study of evaluation of the global energy system as a global environmental protection technology; Chikyu kankyo taisaku gijutsu toshite no global energy system no hyoka ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    With relation to some global energy systems of which viability is predicted in the future, an evaluation was conducted from the viewpoints of economical efficiency, energy balance, CO2 emission, etc. The fossil fuel CO2 capture system, the conventional thermal power plant added with CO2 recovery/treatment facilities, is expected to reduce approximately 70-75% of the CO2 emission. The fossil fuel decarbonated hydrogen system, which decarbonates fossil fuels, recovers/treats CO2 at the place of fuel supply and uses as hydrogen, is of poor practical application from an economical point of view. The fossil fuel methanol synthesis system, which synthesizes methanol from fossil fuels at the place of fuel supply, generates electric power and recovers/treats CO2 with the methanol, is large in energy loss and CO2 emission and low in overall efficiency and CO2 reduction effect at the time of methanol synthesis. The renewable energy hydrogen system is an ultimate system with no emission of CO2, though it costs much. 110 refs., 83 figs., 107 tabs.

  12. Investigations on a global environment improving technology utilizing biological functions. 2. Structuring a ligno-bioprocess; Seibutsu kino wo riyoshita chikyu kankyo kaizen gijutsu ni kansuru chosa. 2. Riguno bio process no kochiku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Discussions were given to reserve global environments on reducing dependence on fossil resources and more effectively utilizing wood resources. Economically utilizable amount of wastes from lumbering factories reaches about five million tons annually. Discussions were made on a ligno-bioprocess that uses these wastes. The current quantitative production efficiency of cellulase by means of bacterial breeding is very high. A problem is production of ligninolytic enzymes, to which application of the recombinant DNA method is indispensable. Combination of steam explosion with biological decomposition or the organosolv process is an effective method for lignin decomposition. Decomposition of cellulose by using the ultra critical water method is worth noticing. With respect to hemicellulose utilization, production of cellulose derivatives, biodegradable polymers and oligosaccharides would be conceivable by means of esterification and etherification. Vanillinic acid, adhesives, resins and lignin-based polymer materials could be manufactured from lignin. Material cost for these products accounts for about 35% of the product price, thus making the lignochemicals promising commercial products. 301 refs., 71 figs., 39 tabs.

  13. FY 1995 report of feasibility study of a model project on energy saving equipment for Fe-alloy electric furnaces in China. Independent theme survey of rationalization of energy consumption; 1995 nendo chosa hokokusho Chugoku no gokintetsu denkiro ni okeru sho energy ka setsubi model jigyo jisshi kanosei chosa. Energy shiyo gorika taisaku kobetsu tema chosa jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-01

    A feasibility study of a model project was conducted on energy conservation and introduction of technology against pollution for Fe-alloy electric furnaces in China. The total production of Fe-alloy was 4.32 million tons in 1995, which recorded the maximum production. Out of which ferro-Cr occupied 9.5%. Production of high carbon ferro-Cr in 2000 is estimated to be 600,000 tons. China`s electric furnaces for ferro-Cr using carbon as heat source do not have covers and gas recovery systems. The gas from furnaces is burnt and wasted, which results in air pollution. To cover the furnaces, grading of powder materials is indispensable for improving the ventilation in furnaces. In Japan, sintering and pelletizing methods were developed. In China, the covering and gas recovery are performed for furnaces using expensive massive ores. In most cases, they are not performed. For three works at Jilin, Lioyang and Jinzhou surveyed in this project, recovered gas can be effectively utilized, which would provide energy saving and environment improving effects. They have enough site areas and workshops in the sites. Construction works can be conducted by China themselves. 6 figs., 32 tabs.

  14. Research report of fiscal 1997. Research on the projects on Activities Implemented Jointly Japan Program (feasibility research on energy saving by improving heat management for hot blast stoves and heating furnaces); 1997 nendo chosa hokokusho. `Kyodo jisshi katsudo Japan Program` ni kakawaru project chosa (neppuro, kanetsuro no netsukanri kaizen ni yoru sho energy kanosei chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Research was made on joint implementation (JI) for preventing global climate changes in China. Since such the stove and furnace consume a large amount of energy, their improvement and energy saving are important for integrated iron plants. Maanshan iron plant was selected for the research. All the furnaces were manually operated without combustion control systems, and oxygen meters for exhaust gas frequently troubled. As measures for the stoves, operation at a proper air fuel ratio, improvement of over heat storage combustion, and dust cleaning for waste heat recovery gas heaters were proposed. For the furnaces, a proper oxygen content at the end of furnaces (reduction of invasion air) was proposed to improve exhaust gas loss up to that in Japan. For this target, reinforced instrument management and standardized combustion control are essential. JI of software improvement for operation and management can reduce annual greenhouse effect gas emission to 45,900t and 6,300t in carbon equivalent for the stove and furnace, respectively. CO2 reduction is also estimated to be 1,173,000t and 205,000t in China of 107,570,000t in raw steel production, respectively. 28 figs., 32 tabs.

  15. FY 1996 result report. Research/development on the creation of high-grade combustion technology using a microgravity environment; 1996 nendo seika hokokusho. Bisho juryoku kankyo wo riyoshita kodo nensho gijutsu soshutsu ni kansuru kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    With the aim of creating high-grade combustion technology which can respond to the decrease in environmental pollutant in combustion exhaust gas, the high-grade combustion technology research development committee was established inside JSUP (Japan Space Utilization Promotion Center), using the underground gravity-free test center. Following FY 1995, the following were conducted: (1) international joint research with NASA, and (2) tests using microgravity test facilities, etc. and analysis/evaluation of the test data. As to the international joint research, a lot of new information was obtained through the adjustment conference with NASA. Further, there were a lot of results obtained from joint tests and researches. Moreover, the leading experimental device and measuring device which are usable in the microgravity field were developed/prepared. Conducted were combustion/evaporation evaluation experiments on fuel droplet and groups of droplet, combustion characteristics elucidation evaluation experiments on high-density fuels, evaluation experiment on flammability limits, and elucidation evaluation experiments on emission mechanism of NOx, etc. Through those, abundant experimental data were able to be accumulated, and a lot of precious knowledge/information were obtained. Besides, the fabrication of high-class combustor test equipment for ground demonstration was started. (NEDO)

  16. Fiscal 1998 research report. R and D on advanced combustion technology under microgravity environment; 1998 nendo seika hokokusho. Bisho juryoku kankyo wo riyoshita kodo nensho gijutsu soshutsu ni kansuru kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Research was made on explication of a combustion phenomenon by using a microgravity facility, and a combustor possible to realize advanced combustion technology. In the basic research composed of 5 themes by the international joint research with NASA, 52 drop experiments using JAMIC's facility and 100 drop experiments using NASA's 2.2s drop tower were carried out. The themes are composed of an interaction in droplet arrays combustion, combustion of binary fuel sprays, combustion characteristics of solid fuel, flame dynamics around a lean flammability limit, and mass transfer around a combustion field. In the experiment using the microgravity experiment facility and analysis evaluation of the experimental data, studies were made on combustion and evaporation of fuel droplets, combustion characteristics of dense fuel, flammability limit, formation mechanism of NO{sub x} and an advanced combustor. For applying a pre-evaporating/pre- mixing combustion system to a combustor for aircraft engines, studies were made on some issues such as improvement of a combustion stability, NO{sub x} discharge characteristics, and optimum fuel atomizing. (NEDO)

  17. Interim report on the research development of high combustion technology using the microgravity environment; Bisho juryoku kankyo wo riyoshita kodo nensho gijutsu soshutsu ni kansuru kenkyu kaihatsu chukan hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    There are problems on diversification of energy from a viewpoint of energy stabilized supply and reduction of environmental pollutant in fuel exhaust gas. For the solution, combustion phenomena are elucidated using microgravity equipment, and a combustor which enables high combustion technology is studied. For it, a field survey is conducted on implementation of international joint research with the U.S.` NASA, and at the same time experiments and analyses of the experimental data are carried out using microgravity experimental equipment. For experiments using microgravity experimental equipment and analysis/evaluation of experimental data, the following were conducted: (1) evaluation of combustion properties of various fuels, (2) fabrication of equipment needed for experiments for analysis/evaluation of combustion parameters, and combustion/evaporation evaluation experiments of fuel droplet/droplet group using microgravity experimental equipment, evaluation experiment to elucidate combustion property of solid particle mixed fuel, evaluation experiment of combustion limit, etc. In fiscal 1993, experimental data are being acquired for establishing a target experimental method. 42 refs., 151 figs., 1 tab.

  18. Fiscal 1993-1998 integrated research report. R and D on advanced combustion technology under microgravity environment; 1993 - 1998 nendo sogo seika hokokusho. Bisho juryoku kankyo wo riyoshita kodo nensho gijutsu soshutsu ni kansuru kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For developing advanced combustion technology by using JAMIC's facility, the advanced combustion technology research committee supported by researchers of universities, national institutes and industries was prepared in JSUP, and R and D using a microgravity experiment facility and the international joint research with NASA were carried out. By using the advanced experimental equipment and measuring instrument developed for microgravity experiments, studies were made on combustion and evaporation of fuel droplets, combustion characteristics of dense fuel, flammability limit and NO{sub x} generation mechanism, and such precious results were obtained as storage of abundant experimental data, explication of a combustion mechanism, preparation of a database and find of new phenomena. In the ground verification experiment using the newly fabricated advanced combustor test equipment, various data effective for developing high-efficiency low-pollution combustors were obtained. Through the joint research with NASA including 5 themes, various results and the real relationship between the researchers were also obtained. (NEDO)

  19. Fiscal 1997 international cooperation project. Report on the results of the research on environmental harmony type combustion technology; 1997 nendo kokusai kenkyu kyoryoku jigyo. Kankyo chowagata nensho gijutsu ni kansuru kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Out of the R and D on the environmental harmony type combustion technology, the results of the project carried out in fiscal 1997 were summed up. In the site survey, etc., visits were paid to France, Spain, Greek, Germany, the U.K. and the U.S. to have discussions and examine the trend of research on the NOx removal catalyst and catalyst combustion. In the actual R and D, the R and D were conducted on zeolite base NOx removal catalyst, oxide composite base NOx removal catalyst, alumina base NOx removal catalyst, direct decomposition type NOx removal catalyst, catalyst combustion, etc. In the R and D of the catalyst combustion, durability under high gas flow flux was examined of PdO-Pt/Ba-Al203 catalyst developed for low temperature use, which indicated that durability and low temperature activity were heightened. As high temperature use catalyst, high temperature durability was examined of the developed Pd0-La/Gd-ZrO2 catalyst, which showed that the durability was favorable. 322 refs., 261 figs., 55 tabs.

  20. Prospects and problems in greenhouse effect gas reducing technologies. Report from the global environment preserving technology discussion committee; Onshitsu koka gas teigen taisaku gijutsu no tenbo to kadai. Chikyu kankyo taisaku gijutsu kento iinkai hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    With respect to effects of technologies on reducing discharge amount of greenhouse gases (carbon dioxide, methane and nitrous oxide), assessments and analyses were performed on 420 techniques including energy saving technologies and new energy technologies. The energy conversion department requires further cost reduction by using such systems as LNG combined power generation using natural gas and high-efficiency coal burning thermal power generation. Requirements for paper and pulp industry include development and wider use of energy saving technologies over the entire manufacturing process, such as a direct causticizing technology and a high-performance recovery boiler. Problems in the cement industry are wider use of blast furnace cement and utilization of coal ash and tire wastes as raw fuels, and those in the iron and steel industry are energy conservation by use of coke furnace moisture adjustment and sintering cooler waste heat recovery. In the civil engineering department, introduction of heat and air insulating methods for buildings, and cogeneration operating on ceramics gas engines is expected. Use of oil substituting energy fueled cars is expected in the transportation department. 5 refs., 12 figs., 1 tab.

  1. Fiscal 1996 international research cooperation project. Report on the R and D result of the environmental harmony type combustion technology; 1996 nendo kokusai kenkyu kyoryoku jigyo. Kankyo chowagata nensho gijutsu ni kansuru kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The research was conducted jointly with Europe of a catalyst which enables clean combustion and NOx removal in polluted gas in combustion flue gas, etc. Reformation of mordenite and {beta}-zeolite was done by ion exchange, ion implantation, and membrane formation. A catalyst was searched for to obtain reducing agents, C5-C8 components, by decomposing light oil. Saponite, clay compound, showed by copper and silver ion exchanges approximately 50% of activity under 20,000h{sup -1}, C3H6 reducing agent, and without steam. The effect of the temperature of sintering on NOx selective reductionality of silver-carrying alumina catalyst was studied, and in sintering at 800degC, activity increased. When using conductive oxides like ruthenium oxide for electrolyte, NO decomposition selectivity increased. As to the functional layer carried above the Pd electrolyte, iron oxide and magnesium oxide increased NO decomposition selectivity. PdO and rare earth oxides forming compounds controlled variation of activity by dissociation/reoxidation of PdO. As to PdO/Gd203, the initial methane combustion activity was favorable, but there was seen deterioration with age. 271 refs., 281 figs., 58 tabs.

  2. Report on fiscal 1995 project to promote an exchange of researchers on environmental problems in the Asia-Pacific region; 1995 nendo itakujigyo (Asia/Taiheiyo chiiki kankyo mondai kenkyusha koryu sokushin jigyo hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    For the purpose of solving environmental problems caused in association with the increasing industrial activities in the Asia-Pacific region, the construction of a research network is being advanced aiming at promoting exchanges with researchers of other countries and activating information exchanges. Investigators were sent overseas to grasp the present situation, and researchers participated in a symposium on the APEC environmental technology cooperation for mutual understanding and personal interchange. In the overseas survey, visits were paid mainly to national research institutes and universities in India and Thailand. Positive approval was obtained on the construction of the ETERNET APR (Environmental Technology Research Network in the Asia-Pacific Region). In the symposium on the APEC environmental technology cooperation held in Nagoya, researchers participated mostly in the second session and made earnest discussions with researchers from other countries. The necessity and importance of the network was emphasized. Countries which participated the symposium have problems common to each, and it was greatly significant to meet together and discuss together. The environmental problem is on a global scale, and it is necessary to make close exchange/interchange of information/opinion on a long term basis and to tackle it in the whole Asia-Pacific region. 3 tabs.

  3. Research cooperation report for fiscal 1997 on the environment-friendly system for effectively utilizing water resources; 1997 nendo kankyo taiogata mizushigen yuko riyo system ni kansuru kenkyu kyoryoku itaku gyomu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This effort exerted in cooperation with the Philippines aims to solve problems related to water resources such as stable supply and pollution of water through developing a waste water treatment/water reuse system which is easy to operate and maintain, and low in price. The ultimate goal includes (1) the construction of a waste water treatment/water reuse system comprising an anaerobic reaction tank and activated charcoal absorption tower, easy to operate and maintain, and low in price, (2) the employment of goods procurable in the Philippines, the goods including carriers for use in the anaerobic reaction tank, microbes for use in both aerobic and anaerobic reaction tanks, and activated charcoal for use in waste water reutilization, and (3) the establishment of optimum operating conditions for the waste water treatment/water reuse system by use of a pilot plant and the transfer of operating and managing techniques to the Filipino counterpart. In this fiscal year, investigations are conducted to disclose the actualities of waste water treatment and water consumption by primary industries in the vicinity of Laguna de Bay, and the waste water to be the object of study and the place of pilot plant installation have been selected. Also conducted are investigations into the carrier, microbe, activated charcoal, etc., for use in the anaerobic reaction tank. (NEDO)

  4. Report on the fiscal 1996 result of the introduction support project of environment-friendly coal utilization systems. Desulfurizing CWM plant; 1996 nendo seika hokokusho kankyo chowagata sekitan riyo system donyu shien jigyo. Datsuryugata CWM setsubi ni kakawaru jissho jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    China is positive to introduce desulfurizing CWM plants among the typical reduction technologies of sulfur oxide emission due to coal combustion. This Japan-China joint project aims at reduction of pollutant emission derived from coal combustion by demonstration of Japanese CWM combustion technology for Chinese existing boilers, and preparation of diffusion bases. The project was promoted at Yanshan petrochemical plant in Peking as a new site. The fiscal 1997 results are as follows: field survey at the site, production of some equipment, receiving of Chinese engineers, and leading of field works. Combustion of material CWM is extremely difficult because of coal concentration as low as 65{+-}1wt% and much volatile matter. The mixture of fuel CWM and pulverized limestone is sprayed into a boiler furnace by burner for water evaporation, coal combustion and limestone burning in a combustion area of the furnace nearly at the same time. S content is fixed through reaction of SO2 and CaO with a decrease in furnace temperature. 14 figs., 11 tabs.

  5. Report for fiscal 1998. Joint research of environment-friendly system for effectively utilizing water resources; 1998 nendo hokokusho. Kankyo taiogata mizushigen yuko riyo system ni kansuru kenkyu kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The research is conducted in cooperation with Industrial Technology Development Institute of the Philippines, and aims to solve water related problems such as unstable water supply and water quality pollution though developing a waste water treatment and recycling system which is easy to operate and maintain, low in cost, and usable in the Philippines. Fiscal 1998 is the second year of the project. Statistics are studied about the load that each industrial branch imposes on water for its pollution, and it is found that food manufacturers, paper pulp mills, and fiber dyeing plants are heavily responsible for water pollution. A method consisting of single-tower UASB anaerobic treatment and activated sludge treatment is applied as a water treatment process to Ram Food Products Corporation, and its optimization is studied. A removal rate 60% is achieved after a 12-hour treatment period at a COD (chemical oxygen demand) rate of 8g/liter/day. A method consisting of coagulating sedimentation and activated sludge treatment is applied to the waste water from a Solid Mill Corporation dyeing plant, when it is found that the water after ultimate treatment is almost colorless and that COD is 76mg/liter and BOD (biological oxygen demand) 13mg/liter, and these suggest that the waste water is recyclable. Since it is low in COD removing rate, the application of anaerobic treatment to high-concentration water after washing is not appropriate. (NEDO)

  6. Fiscal 1997 report on the environment friendly type coal utilization technology transfer project. Downstream field; 1997 nendo gyomu hokokusho. Kankyo chowagata sekitan riyo gijutsu iten jigyo (karyu bun`ya)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For the purpose of supporting the introduction/spread of clean coal technology (CCT) in countries in Asia and the Pacific, engineers of the countries concerned were invited to Japan aiming to ferment the understanding of CCT and improve abilities of them. The project was carried out by NEDO, and managed by CCUJ. It has two courses. The manager course is for policy makers, management and senior managers. By assessing CCT and presenting a menu for economical efficiency, environmental arrangement for CCT introduction is made in working out policies and planning plant/equipment investment in the future. The engineer course is for policy planners, mid-class managers and senior engineers. It proposes data on which to base a decision in working out/planning CCT facilities, and at the same time ideas by which to reduce environmental loads by management of facilities, simple improvements, etc. The number of the persons invited are 21, that is, 8 from China, 5 from Indonesia, 4 from the Philippines and 4 from Thailand. After the training, future subjects were summed up

  7. Fiscal 1996 report on the results of the R and D under a consignment from NEDO of the environment friendly type production technology. High-functional chemical synthesis bioreactor (for public); 1996 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Kankyo chowagata seisan gijutsu (kokino kagaku gosei bioreactor) kenkyu kaihatsu seika hokokusho (kokaiyo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of developing production technology of chemical substances which are resource conservative, energy saving and less in environmental loads, a R and D was conducted of a high-functional chemical synthesis bioreactor. The paper reported the results of fiscal 1996. As for proliferation control breeding technology, relating to the switch control technology of proliferation related genes by regulatory factors, the effectiveness on an incubator level was demonstrated, and at the same time improvement of reactor performance in using this technology was studied on paper. As to the manifestation control breeding technology, the actual design of the development of manifestation promotion technology by bent DNA, etc. was proceeded with, and at the same time the following were commenced: selection of bent DNA, confirmation of bent characteristics, and work of vector construction using candidate bent DNA. Further, the simple assessment system of manifestation vectors was constructed. In the development of bioreactor system technology, the actual design was started of the two-stage culture continuance system which separated proliferation and enzyme production. 48 refs., 41 figs., 6 tabs.

  8. Fiscal 1998 R and D project on global environmental industrial technology. R and D result report on environment- friendly production technology (advanced chemical synthesis reactor); 1998 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo. Kankyo chowagata seisan gijutsu (kokino kagaku gosei bio reactor) kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For high-efficiency production of substances by bioreactor, study was made on a bio-control mechanism as its elementary technology. On the study of breeding technology by expression control, the structure design of a control region and development of new expression vectors had been finished, and study was made on breeding of high-efficiency recombinant production cells by using candidate expression vectors. On the study of breeding technology by multi-stage enzyme reaction control, the enzyme gene of a system synthesizing cysteine from glycerol was searched, and hydroxypyruvaldehyde hydrogenase gene was isolated as substance production model. Cysteine production Escherichia coli combined with serineacetyl transferase gene was also prepared. In addition, study started on cloning of hydroxyacetone oxidase gene. On development of reactor system technology, for conversion of serine to cysteine, study was made on optimization of a reaction condition by theory of enzyme reaction rate. (NEDO)

  9. Achievement report (1/2) on R and D in fiscal 1999 on environment adaptive next-generation supersonic propulsion system. R and D of environment adaptive next-generation supersonic aircraft engine; 1999 nendo seika hokokusho. Kankyo tekigo gata jisedai choonsoku suishin system no kenkyu kaihatsu - Kankyo tekigo gata jisedai choonsokuki you enjin kaihatsu (1/2)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-12-01

    With an objective to develop an environment adaptive next-generation supersonic propulsion system, research and development have been performed on noise reducing technologies, NOx exhaust reducing technologies, CO2 exhaust reducing technologies, and environment adaptive engine systems. This paper summarizes the achievements in fiscal 1999. In the R and D of noise reducing technologies, the following activities have been carried out: selection and evaluation of ceramics as the porous sound absorbing structural material; evaluation on characteristics of axis-symmetrical mixer ejector shape; discussions on application of LES to the CFD analyzing technology; literature investigation for fan noise reduction; and design and fabrication of test equipment. In developing the NOx exhaust reducing technology, conceptual design was performed on a combustor that can achieve the NOx exhaust target, and acquire stable combustion. In addition, researches were carried out on AI control of stable combustion specific type, and AI control of NOx feedback type. In developing a heat resistant liner for the combustor, material characteristics of the CMC combustor were acquired from the tests using test pieces. Specifications were decided on a large CMC parts manufacturing equipment, and the equipment was introduced. (NEDO)

  10. Fiscal 1997 report on the results of the R and D on the invention of high-level combustion technology using the microgravity environment; 1997 nendo seika hokokusho (bisho juryoku kankyo wo riyoshita kodo nensho gijutsu soshutsu ni kansuru kenkyu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For the purpose of achieving both the diversification of energy resources and the reduction in environmental pollutants in fuel exhaust gases, the paper conducted elucidation of combustion phenomena using microgravity facilities and research on combustors which make high-level combustion possible. In the experimental study using microgravity experimental facilities, conducted were evaluation experiments on combustion/evaporation of fuel droplets and droplet groups, elucidation/evaluation experiments of combustion characteristics of high-density fuels, evaluation experiments of flammability limit, and elucidation/evaluation experiments of emission mechanisms of NOx, etc. Analysis/evaluation of the data obtained and elucidation of the combustion mechanism were conducted. Further, by applying the results of the microgravity experiment, the high-level combustor experimental facilities were fabricated, and validation tests were started. In the international joint research with US`s NASA, the following were conducted using JAMIC`s facilities and NASA`s 2.2 second drop tower: study of mutual interference of droplet series combustion, study of binary system fuel droplet series combustion, study of combustion characteristics of solid fuels, study of behavior of flames around the lean flammable limit, etc. 151 refs., 253 figs., 7 tabs.

  11. FY 2000 Project report on drawing district energy-saving visions for Town of Ginan. Preliminary survey; 2000 nendo Ginan-cho chiiki sho energy vision sakutei nado jigyo hokokusho. Shoki dankai chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-02-01

    Actual situations of energy consumption and potentially saved energy are surveyed among others for introduction of concrete energy-saving measures in Town of Ginan, Gifu Pref., to promote energy saving and abatement of gas emissions which cause global warming. The problems pointed out by the survey on the actual situations of energy consumption include insufficient measures for avoiding waste in houses relative to the nation-wide tendencies, although improved to some extent, difficulty in spreading energy-saving conception throughout the employees in industrial areas, and insufficient limitation of use of private cars and alternative transportation systems. The energy-saving measures studied include setting temperature for air conditioners, and efficient use of home electric appliances, e.g., TV sets, refrigerators and washing machines. The measures studied for the transportation sector include spreading/promotion of clean cars, wider utilization of public transportation systems, promotion of telework systems aided by information communications, and promotion of eco-driving. The energy-saving target, to be realized in FY 2010 by these measures, is set at 67,646 times 10{sup 7}Kcal for the town. (NEDO)

  12. Fiscal 1998 research report on the basic study on the effect of microgravity on living individuals; Bisho juryoku no seibutsu kotai ni taisuru eikyo no kiso kenkyu 1998 nendo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    In order to clarify the effect of microgravity on vital functions and organisms at a cell level, this research studies the molecular biological response function of higher animals, the gravity acceptable mechanism of single-cell organisms, the effect of gravity on geotaxis of insects, measurement of monoamine system neurotransmitters of rat hippocampus by dialysis in a brain and the effect of microgravity on it, the effect of microgravity on water and bone metabolism functions and immunity function, and the analysis of BZ reaction as a simple model of vital reaction. The themes of the research are as follows: the effect of microgravity environment on cell fusion, the analysis of gravity acceptable mechanisms of single-cell organisms, the effect of oriental medical treatment on bone metabolism anomaly of mouses under microgravity environment, the effect of oriental medical treatment on change in physiological function under microgravity environment, the effect of microgravity environment on immunity systems, the effect of gravity on cell activities, the effect of a gravity field on chemical oscillation reaction, and the effect of gravity on geotaxis of insects. (NEDO)

  13. Report on a survey in fiscal 1998 for petroleum substituting energy development and utilization in the Pacific Ocean region; 1998 nendo Taiheiyo chiiki sekiyu daitai energy kaihatsu riyo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A survey was carried out to make available the information base that can collect, put into order and provide quickly and accurately the energy related information based on global environment problems in the Pacific Ocean region. Fiscal 1998 has performed a substituting energy demand and supply analysis in the Pacific Ocean region by adding the 1996 data, in addition to collection of the normal energy data. For the purpose of analyzing the petroleum substituting energy demand and supply in the Pacific Ocean region, data were collected from 17 countries for fiscal 1997 and the quarterly data for 1998. Retroactive data collection was also continued. The growth rate of primary energy supply in the Pacific Ocean region is 1.8% in average in the 1980's, and 3.8% in the 1990's. In contrast, the growth rate of petroleum substituting energies is 6.4% in the 80's and 6.2% in the former half of the 90's, being far higher than the growth rate of the primary energy supply. The share of the petroleum substituting energies accounting for in the primary energy supply has increased from 6.7% in 1980 to 12.1% in 1996. As the breakdown, nuclear power accounts for overwhelmingly large, followed by geothermal energy and new energies. (NEDO)

  14. Survey report for fiscal 1998. Evaluation by industrial circles of the COP3 outcome and their future response (America); 1998 nendo chosa hokokusho. COP3 no kekka ni taisuru sangyokai no hyoka oyobi kongo no taio ni tsuite (Beikoku)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Response in America to COP3 (Third Session of the Conference of the Parties to the United Nations Framework Convention on Climate Change) is investigated. Office of Energy Efficiency and Renewable Energy (EE) of America's Department of Energy conducts activities designed to protect environments and supports America's economic competitiveness. The scope of EE activities is quite wide, covering efforts at energy efficiency improvement and renewal energy utilization for all energy consuming sectors involving construction work and equipment for buildings, various industries and public utility works, and transportation. EE also supports and promotes the development of advanced industrial materials, electric vehicles, hybrid vehicles, fuel cells, etc. In the field of renewable energy, it deals with the exploitation of sunlight, biomass, wind force, water power, geothermal energy, etc. It also supports efficiency improvement efforts being undertaken through studies of advanced power transmission and distribution, high-temperature superconduction, energy storage, etc. The said supports are provided not only by Federal Government but also by state governments, and include financial aids. A number of programs are under way, worked out and promoted by the respective bureaus and departments. They are evaluated, protected, and implemented through the partnership of official and civilian organizations. (NEDO)

  15. Report on the FY 1999 research survey on the industrial utilization/development of the biofilm formation mechanism and antifouling substances; 1999 nendo bio film keisei kiko oyobi sogai busshitsu no sangyoteki riyo kaihatsu chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The paper described the results of the FY 1999 research on the fouling by marine aufwuchs. The survey is aimed at searching the nature world for active substances for biological antifouling. The fouling mechanism in the ocean is as follows. The adsorption of organisms called the conditioning film first occurs on the surface, and next, bacteria and diatom around the surface form biofilm and cover. After that, biological fouling by large aufwuchs occurs. Therefore, the control of biofilm formation was regarded as most important, and with this as a guidepost, the search was conducted. Using biofilm anti-formation activity and periphytic bacteria anti-growth activity as guideposts, some compounds were searched for. Being aimed at Porifera, in particular, new compounds were isolated from it. Since few of other organisms attaches on the surface of sponge, there is a great possibility of Porifera's producing any anti-fouling substances. Further, it is thought that symbiotic microorganisms of sponge (40% of the total weight) produce various biologically active substances. Synthetic phenethyl amine derivatives were also studied. (NEDO)

  16. Research report for fiscal 1998. Basic research for promoting joint implementation, etc. (modification of heating furnaces of three refineries at Kuiibyshev, Syzran, and Novokuibyshev); 1998 nendo chosa hokokusho. Kuiibyshev, Syzran, Novokuibyshev 3 seiyusho kanetsuro kaizo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A study is conducted about the CO2 reduction effect to be achieved by modernizing the 130 tube-type heating furnaces of the above-named three refineries in Russia. Chosen especially for the study are 39 heating furnaces which are the essential refinery facilities that require urgent energy related measures. Based on the outcome of the study, modification plans are formulated and rough designs are drawn, which involve the replacement of antiquated furnaces by high-performance new-design furnaces, installation of waste heat recovery facilities such as preheating convection sections and air preheaters, reinforcement of furnace wall insulation materials, installation of optimal control systems for furnace operation, modification of fuel supply systems for higher efficiency, installation of decoking systems, etc. After the modification, the heating furnace thermal efficiency will be secure at 90% at the lowest. After the application of this energy efficiency enhancement project, CO2 emission will be reduced by approximately 480,000 tons/year for the 39 chosen furnaces or by approximately 1,200,000 tons/year for all the 130 heating furnaces. (NEDO)

  17. Fiscal 1998 survey report. Welfare equipment (Development of human friendly care support intelligent equipment / Development of home welfare equipment system); 1998 nendo chosa hokokusho. Fukushi kiki (human friendly kaigo shien chino kiki kaihatsu / zaitaku fukushi kiki system kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Since disabled persons increase with a progress of an aging society, while a care power decreases with a decrease in birth rate, development and practical use of the welfare equipment contributing to self-support of aged and handicapped persons, reduction of doctors' or therapists' burdens, and as a result, reduction of medical care costs are desirable. Among them, R and D and practical use are expected of the advanced welfare equipment and system based on human engineering technology contributing to improvement of lives of aged and handicapped persons, and support of nurses and cares of disabled persons. In fiscal 1998, on both human friendly care support intelligent equipment and home welfare equipment system, this project clarified essential technical issues based on the future view, selected some themes to be newly developed in the future, and surveyed and evaluated the details of their R and D concretely. For the former, 'heart disease diagnosis and treatment total support system,' and for the latter, 'body function rehabilitation support system' were surveyed. (NEDO)

  18. Report on achievement in developing an ultra low loss power element technology. Survey on practical application of the next generation power semiconductor devices; 1998 nendo choteisonshitsu denryoku soshi gijutsu kaihatsu seika hokokusho. Jisedai power handotai device jitsuyoka chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Trends were surveyed for development of an ultra low loss power element. Performance improvement has been progressed on power semiconductor elements by using Si as the raw material, but loss reduction has come close to the physical limit. SiC is expected of possibility to go beyond this limit. SiC is so very excellent that its band gap is two to three times greater, insulation breakdown electric field is 7.5 times higher, temperature to become a true semiconductor is three to four times higher than those of Si. The wide gap can reduce high temperature leaking current in p-n junctions, and the increased authenticity temperature can increase the upper limit for operation temperature. The insulation breakdown strength being higher by one digit can reduce the drift layer thickness, and is expected to dramatically reduce the loss. The problem is that high quality crystals have not been obtained to date. One of the promising application fields is electric vehicle. The device currently using the power element in the largest scale is used in frequency converting stations to link the 50-Hz power network in the eastern part of Japan to the 60-Hz network in the western part of Japan. Surveys were carried out on the Sakuma frequency converting station and the New Shinano substation. (NEDO)

  19. FY 1995 report on verification of geothermal exploration technology. Development of fracture reservoir exploration technology (development of seismic exploration); 1995 nendo chinetsu tansa gijutsunado kensho chosa. Danretsugata choryuso tansaho kaihatsu (danseiha riyo tansaho kaihatsu) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This report provides the development of new exploration technology using elastic waves, such as reflection seismic survey, VSP, and seismic tomography, for precisely characterizing subsurface fractures in geothermal reservoirs. In order to investigate and improve the effective data acquisition and analysis methods for detecting a fault type of fractures, an experiment of a seismic tomography method was conducted using wells drilled in the Ogiri geothermal field, Aira-gun, Kagoshima Prefecture. An experiment of propagation characteristics of piezo type underground seismic source in the volcanic field was also conducted as a trend survey of underground seismic sources. The fracture type in the model field was systematically analyzed by measuring the core samples obtained in the demonstration test field through remanence measurement, fluid inclusion measurement, and zircon measurement using test equipment, and by analyzing results obtained from cores and results of seismic tomography obtained from the wells. Based on these results, the effectiveness and practical application of exploration methods using elastic waves were investigated. 80 refs., 250 figs., 49 tabs.

  20. Fiscal 1999 geothermal development promotion survey report. Data processing (No. B-5 - Musadake region - Phase 3); 1999 nendo chinetsu kaihatsu sokushin chosa data shori hokokusho. No. B-5 Musadake chiiki (Dai 3 ji)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-01-01

    A comprehensive analysis was conducted into the results of a survey on the state of existence of geothermal energy resources in the Musadake region, Shibetsu-gun, Hokkaido. The region was volcanically active in the period from the Neogene period into the quaternary, with some volcanos still active even today. The geological structure on the whole is characterized by the Musadake/Mt. Shitabanupuri fault which is the major structure running NNE-SSW and having a folding structure. It is inferred that Musadake is the heat source responsible for the underground temperature distribution in this region. The maximum temperature of 274 degrees C is recorded at borehole N11-MD-3 in the northeastern part of Musadake, and the temperature falls rapidly as the distance from the borehole increases. Ejection of geothermal fluids is observed at boreholes N11-MD-3 and N11-MD-4. It is inferred that the deep-seated geothermal water is of the neutral Cl type with Cl concentration estimated at approximately 12,000 mg/liter. Steam composition is characterized by a gas concentration level that is as high as 3-4 vol.%. The gas is composedly mainly of CO2 and contains some hydrocarbons. Fluids in this region are classified into water mixing into deep-seated geothermal water and groundwater originating in meteoric water. (NEDO)

  1. Fiscal 1995 survey of promotion of the geothermal development. Report on a usage feasibility test of a small scale geothermal binary cycle power generation system; 1995 nendo chinetsu kaihatsu sokushin chosa. Chusho chinetsu binary hatsuden system jissho shiken hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    In this survey, studies for popularization and practical utilization of small and medium size geothermal binary cycle power systems which assesses low and medium temperature geothermal resources were conducted, and studies for development of the system to be introduced for practical use and for promotion of the popularization were made. A study was carried out of preconditions and various conditions of a demonstrative test plant (100kW class, 500kW class) in view of the initial cost of the actual plant, and an analysis was made of the power generation cost. Acceptability of the demonstrative test plant (100kW class) was examined to analyze problems on the introduction. A thermodynamic analysis was made of the output of geothermal binary cycle power generation. Analysis/evaluation of the results of the 100kW demonstrative test plant were carried out in view of the operation results of the plant of the same kind, and checks/reviews were conducted of performance and reliability of the system, equipment simplification, etc. Inspection of the system was made in the stage of design/manufacture of the 500kW demonstrative test plant. Concerning the spread/expansion of the system, studied were multiple stage geothermal utilization and PR promotion method. 14 refs., 62 figs., 55 tabs.

  2. Fiscal 1999 research result report. Research on improvement of boiling heat transfer characteristics by photocatalyst wall; 1999 nendo hikari shokubai hekimen ni yoru futto netsu dentatsu tokusei kaizen ni kansuru kenkyu chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Research was made on improvement of the wettability and boiling heat transfer characteristics of a photocatalyst wall. Measurement experiment of the wettability was made for anatase type titan oxide-coated Al, SUS and Pb plates, rutil type titan oxide-flame coated SUS plate, raw plate, and oxide-plasma coated titan plate. In the ground experiment, the contact angles of distilled water and oil on specimen surfaces were measured. In the microgravity experiment, falling droplet images were recorded by using the facility of Japan Microgravity Center (JAMIC). For obtaining the effect of radioactive emission, UV irradiation, {gamma} ray and neutron beam irradiation by nuclear reactor, and {gamma} ray irradiation by Co-60 were carried out. As the experiment result, the rutil type titan oxide-flame coated SUS plate, nonconductor-coated titan plate, and zircaloy plate showed large improvement of the wettability by {gamma} ray irradiation with Co-60. It was also confirmed that in particular, titan shows the large effect of radioactive emission, and the wettability deteriorates rapidly after {gamma} ray irradiation. (NEDO)

  3. Basic investigation on promotion of joint implementation in fiscal 2000. Efficiency improvement project for gas turbine power plant in Iran; 2000 nendo kyodo jisshi nado suishin kiso chosa hokokusho. Iran gas turbine hatsuden plant no koritsu kaizen project

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Investigations and discussions have been given on measures to improve energy conservation and efficiency at a power plant of Kish Water and Power Company (KWPC) in Iran. The site has high ambient temperature throughout a year, making the gas turbine power plant capable of generating power only at about 70% of the rated output, with the power generation efficiency decreasing. The project has analyzed the current situation at the plant, and evaluated different means that appear effective in improving the efficiency, including the gas turbine absorbed air cooling system, the steam injection system, and the combined cycle. As a result of the discussions, it was revealed that energy saving effect can be obtained at 145 TJ with the gas turbine absorbed air cooling system, 224 TJ with the steam injection system, and 1017 TJ with the combined cycle. The annual reduction of greenhouse gas emission due to the above energy conservation would be about 11 thousand tons, 16.5 thousand tons, and 75 thousand tons, respectively. However, the investment payback period would be about 2.45 years, 8.31 years, and 14.21 years, respectively. Therefore, the profitability does not appear very attractive because of low fuel unit cost. (NEDO)

  4. FY 1997 report on the study on solidification process of high-temperature melt of heat resistant metals; 1997 nendo chosa hokokusho (tainetsu kinzoku koon yueki no gyoko katei no kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Study was made on a solidification process of metal melt under micro-gravity condition in an underground non-gravity experiment center, considering that improvement of the heat resistance of turbine blades for jet engines and power generation gas turbines contributes to prevention of global warming through improvement of thermal engine efficiencies and consumption reduction of precious fossil fuel. Study was made on a simulation program and precise measurement of thermal properties for precision casting of heat-resistant alloy members. Study was also made on Al and Zn alloys and their welding for production and evaluation technologies of new metal textures by supercooling solidification. Some issues for strongly desired improvement of a simulation program for precision casting were clarified. In addition, since thermal property data of practical heat-resistant polyalloy members are poor, data and measurement method for precision casting were clarified. It was also suggested that basic elucidation of the solidification process under micro- gravity condition is possible. 34 refs., 41 figs., 5 tabs.

  5. Research report of FY 1997 on the influence of insulation materials on global warming; 1997 nendo jigyo hokokusho (chikyu ondanka ni taisuru dannetsuzai no oyobosu eikyo ni kansuru chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This report describes the influence of insulation materials on global warming. In this study, extrusion polystyrene foam and rigid foam urethane have been selected for review. These were reviewed with both discharge of foaming agent and CO2 reduction produced by energy conservation as a result of the application of insulation material to houses by assuming what conditions would be applied for future foaming agent and thermal insulation. Discharge of CO2 was also considered through manufacturing process of insulation materials. The result was used for judgment of applicability of foamed plastic type insulation materials from the global warming viewpoint. In this study, the influence of insulation materials on the global warming was calculated in each district through their life cycle. It was found that the extruded polystyrene foam second-b and rigid foam urethane are effective to reduce the global warming in Sapporo, Morioka and Sendai in case of a detached house, except a detached house located in the southern district where requires less heat load. In case of a multiple dwelling house, any insulation material reviewed in the study showed that they could reduce CO2 in all districts. 10 refs., 52 figs., 64 tabs.

  6. Fiscal 1998 research report. Popularization project of the proper treatment technology of industrial wastes in Asian regions; 1998 nendo chosa hokokusho. Asia chiiki sangyo haikibutsu tekiseika shori gijutsu nado fukyu sokushin jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Study was made on popularization of the proper treatment technology of industrial wastes in Asian regions. In principle, industrial wastes should be recycled in a country concerned, however, because of a difference in technology and industrial location, treatment of all industrial wastes in a country concerned is impossible. International cooperation is thus indispensable to promote proper efficient practical measures for environment. For studying the possibility of the international cooperation between Japan and Asian countries concerned for further recognition and solution of industrial waste problems, 'International Symposium on the Asian Industrial Waste Issue' have been held in Tokyo since 1997 for governmental staffs. In fiscal 1998, Malaysia was invited in addition to China, Philippines and Thailand for popularization of the proper treatment and recycling of industrial wastes in Asian regions. In every Asian countries, poor collection of discharge, treatment and disposal data is an obstacle to effective treatment. Technical cooperation and financial support by developed countries are demanded. (NEDO)

  7. Research report of fiscal 1997. Joint research project on petroleum substituting energy between Japan and the EU; 1997 nendo chosa hokokusho. Nichi EU sekiyu daitai energy kanren kyodo kenkyu jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Four researchers were invited from EU countries to promote R & D of petroleum substituting energy in Japan, and the joint research was made in institutes of Agency of Industrial Science and Technology related to each theme for 50 days. On the research on deep geothermal prospecting based on volcanic halocarbon group, it was showed that halocarbon discharged from volcanic or hydrothermal system is an important window to survey activities within the earth. On the research on catalyst for hydrogenation of coal-derived liquid, XPS data was reported, and some preliminary conclusions were obtained. On the research on oxide system anode material for Li secondary cells, a method for improving the state of host to ion moving in 1-D to 3-D networks by diffraction method was showed. In particular, the method was effective to offer electronically sensitive environment to moving ion system. On the research on hydro-dechlorination of hydrocarbon halide, the theme related to environmental measures against waste hydrocarbon halide (depletion of the ozone layer) was studied. 83 refs., 32 figs., 20 tabs.

  8. FY 1998 annual report on the study on development of corrosion-resistant ceramic materials for garbage incinerators; 1998 nendo gomi shori shisetsuyo taishoku ceramics zairyo no kaihatsu ni kansuru kenkyu chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Described herein are the FY 1988 results of development of corrosion-resistant ceramic materials for garbage incinerators. Residue released when porcelain stocks are collected is selected as the inexpensive stock for SiO{sub 2}-Al{sub 2}O{sub 3}-based refractory materials. It is incorporated with carbon black and reduced at 1,200 to 1,500 degrees C in a nitrogen atmosphere. Synthesis of the target Si-Al-C-N-O-based compound succeeds in the presence of a solid catalyst, but it is a fine powder, and hence that of the massive compound fails. The commercial ceramic materials and new refractory materials, made on a trial basis, are evaluated for their resistance to corrosion using fry ashes collected from a commercial incinerator. These ashes are higher in melting point, more viscous, holding a larger quantity of attached slag and more corrosive than synthetic ashes. These materials are corroded acceleratedly as temperature increases to 1,200 degrees C or higher, more noted with the ceramic materials than with the refractory materials. Oxidation and melting characteristics of the molten slag affect corrosion of some materials. Use of the graphite-based material shall be limited to a section below the slag surface, where graphite is oxidized to a smaller extent. The MgO-based material is promising. The Al{sub 2}O{sub 3}-Cr{sub 2}O{sub 3}-based material is more promising than any other material developed in this study. Their bending strength before and after the corrosion test is measured at normal temperature to 1,700 degrees C, to investigate their deterioration by high temperature and corrosion. (NEDO)

  9. FY 1998 annual report on the survey on development, introduction and promotion of urban type multipurpose geothermal utilization techniques; 1998 nendo toshigata tamokuteki chinetsu riyo gijutsu no kaihatsu, donyu, sokushin ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Introduction of geothermal heat pump systems, which depend on temperature differential, is investigated for urban areas, which have large energy demands. Results of the surveys on the current situations of geothermal heat pump (GHP) systems indicate that they have already numbered 300,000 units in USA and totaled more than 50,000 units in Switzerland and Northern European countries, and that they are increasing at an annual rate of higher than 10%. The results also indicate that introduction of these systems are well feasible in Japan, which generally has better topographical conditions than American and European countries, and the GHP system with vertical ground heat exchanger is investigated for its topographical and environmental considerations. These systems could annually abate approximately 52 million tons of CO2 (4.3% decrease), if disseminated to all households. They are also expected to help control the heat island phenomenon, and reduce peak power consumption. The technological problems to be solved before these systems are massively disseminated including development of small scale drilling rigs and preparation of drilling manuals. System standardization and introduction of subsidy systems are also needed to massively disseminate these systems. (NEDO)

  10. FY1998 report on a survey related to joint utilization of welfare device development data using an international network; 1998 nendo kokusai network ni yoru fukushi kiki kaihatsu data no kyodo riyo ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A survey was made in relation with joint utilization of welfare device development data using an international network. Developing welfare devices requires data from ergonomic and medical systems, while the cope of the objects is wide, and the kinds are various. For proliferation of welfare devices, system compatibility evaluation including that on using environment is important, including living environments that are different by countries. The present survey has identified how data for aged, handicapped and help-needing persons are accumulated and utilized in research organizations in America and Europe for both of the ergonomic and medical areas. The survey also investigated major academic societies in overseas countries, and collected database and academic network information that support the advanced research and development. At the same time, investigations were also made on organizations and corporations who are moving forward the efficient data utilization. Welfare device and service information providing systems in Japan were investigated to compare them with the trends in other countries. Conceptions and methods were compiled to utilize data internationally and jointly. Database models for device development were considered, and a proposal was made on structuring a research and development supporting database, and the operation method thereof. (NEDO)

  11. Report on the investigational research on the influence and effect of the fiscal 1994 packaging regulations on the industrial activities; 1994 nendo hoso kisei ga sangyo katsudo ni ataeru koka ni kansuru chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    The paper studies a desirable way of developing recycling and simplification of the packaging materials and analyzes its effects on the industrial activities and the conditions for location of local industrial sites to make future proposals for the issue. The research and development of biodegradable plastics as new packaging materials have been advanced in general enterprises, some of which have already become products. This is a technology which attracts attention as one of the methods for solving the waste problem. The development of packaging technology which can cope with the packaging waste issue has been promoted. The methods are divided into shape changes to bags, cups, BIB (bag in box) and refill containers; material changes to paper, dechlorination and simple material; reuse of used paper, etc. Part of the methods is practically applied. The packaging method in Germany has an effect on the distribution in Japan. Recently the economic growth has been in the doldrums, and the waste problem has become conspicuous. In the movement for the global environmental preservation, another look is obliged to be taken at the packaging industry circle. 11 refs., 10 figs., 14 tabs.

  12. FY 1997 report on the survey of fundamental technologies in the field of brain neuro-biotechnology; 1997 nendo Sendo kenkyu hokokusho (noshinkei saibo kogaku kiban gijutsu no chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In Japan with its rapidly aging society, fundamental technologies are required for the development of artificial nerves substituting for or supporting damaged ones, and ultimately constituting artificial neurons based on the knowledge of the brain functions at the molecular and cellular levels. This study defines the fundamental technologies which would be required for the development in the area, and further, evaluates the potential of the technologies to develop the novel industry. The brain function is closely related to the activity in neuronal circuits. In order to repair injured nerves and to develop the advanced technologies of electronics for helping impaired neuronal functions, the most important and urgent is to understand how to work the neuronal circuit system in the brain. Based on these viewpoints, new methodological approaches would make it possible to relieve neural impairment in the sensory input system and the motor system by the use of electronic circuits. They also would improve rehabilitation after injury, and treat neurodegenerative diseases such as Parkinson`s disease. These advances surely create the new types of industry seeds in near future. 77 refs., 29 figs., 2 tabs.

  13. Report on fiscal 1992 geothermal development promotion survey data. No.A-1 Mannenyama area (first); 1992 nendo chinetsu kaihatsu sokushin chosa data shori hokokusho. No.A-1 Mannenyama chiiki (daiichiji)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    A synthetic analysis was made of the results of the fiscal 1992 survey on geothermal resource existing in the Mannenyama area. The area surveyed is located at the central-west part of Oita prefecture, belonging to an administrative division of Kusu-machi and Kokonoe-cho, Kusu-county, Oita pref. The area surveyed was approximately 280 km{sup 2}. As signs of existence of geothermal energy, there are seen hot springs and alteration zones there. In the Takigami district neighboring the south-east part of the area, construction of a geothermal power plant is being planned. From a synthetic consideration of various investigations, the region round the Inomuta sedimentation zone is considered to be a district satisfying conditions for existence of geothermal resource and a promising geothermal district, where Takigami, Otake, Hachoubaru and Okuni are widely included. In the area surveyed this time, the area around Noya-Mizuwaketouge seems to be the most potential for geothermal resource, judging from the alteration status, abnormal mercury concentration, fault state structure and spread of the low resistivity zone. Also in the south and the north-east of the area, geothermal activities can be estimated. 99 refs., 194 figs., 52 tabs.

  14. 1998 investigation report. Basic investigation for promotion of joint projects, 'Investigation on Russian CO2 reduction conditions'; 1998 nendo Roshiakoku CO{sub 2} sakugen anken chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A feasibility study was conducted for a project assuming modernization of a manufacturing plant and improvement of power generation facilities in Russia, with the aim of 'joint implementation' in reducing the greenhouse effect gas by utilizing technologies mutually between advanced nations. The project is to replace obsolete an open hearth furnace and cupola with electric furnaces in connection with the cast steel and forged steel production facilities of Uralmash, a largest-scale Russian heavy machinery manufacturer, to change surface hardening equipment for rolling roll products from a combustion method to a low frequency induction heating method, and to enhance efficiency of the power generation equipment of a public corporation which supplies electric power to Uralmash. Through a field study and a technological investigation, the social background of the project was examined such as the situation of the Russian Federation, its environment and the present state of Sveldorv province; then, examined were the specifications of the facilities, project cost, cost performance, CO2 reduction expected, environmental influence, etc., in the case where the modernization project of Uralmash was implemented. (NEDO)

  15. Fiscal 1993 investigational study of a model of international cooperation for an environmentally harmony type green technosystem; 1993 nendo Oshu ni okeru haikibutsu shori oyobi recycle no doko ni kansuru chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    For the natural environment preservation, effective utilization of resources, and maintenance of the ecosystem, an international cooperation model was proposed for the environmental harmony type green technosystem. A comprehensive evaluating analysis of a green forest resource, etc. as the global resource, and an intensive extraction of subjects and needs was made. The analysis was conducted of technical possibility and abstract business development effects toward the industrialization with high values added which is in harmony with the environment. As a case study, the Papua New Guinea area, Malaysia was selected and re-evaluated. For this typical tropical forest area, a new technical system was studied based on the natural environment, industry/economy, social/cultural assessment, etc., and a model for industrializing new international cooperation was proposed. For the model making for industrialization, various steps to be taken and conditions to be prepared were studied and arranged for the realization. Upon going ahead with the international technical cooperation, Japan, a large lumber consuming country, needs to always consider the fostering and effective use of lumber resource in particular. 27 refs., 28 figs., 30 tabs.

  16. Fiscal 1998 research report on the development trends of natural gas conversion technologies into liquefied fuel in Russia; 1998 nendo Roshia ni okeru tennen gas no ekitai nenryoka gijutsu no kaihatsu doko nado ni kansuru chosa kenkyu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Russia having natural gas resources largest in the world is actively promoting the basic research on liquefaction technology of natural gas such as Fischer-Tropsch (FT) synthetic catalyst, and its research potential is extremely high. This 3-year research project surveys the R and D trends of catalyst technology for liquefaction of natural gas, and fabricates the prototype FT synthetic catalyst based on the idea of Russian researchers to evaluate its feasibility experimentally. This report summarizes the following to clarify the research background: (1) The technology system for liquefaction of natural gas, and its future R and D trend, (2) The R and D trends of liquefaction technology of natural gas in the world, (3) The R and D trends of liquefaction technology of natural gas in Russia, (4) The research system of catalyses in Russia, (5) The activities of Russian catalysis research institutes, (6) The fuel liquefaction technologies of Russian major research institutes, and (7) The proposals from Russian research institutes. (NEDO)

  17. Basic investigation on promotion of joint implementation in fiscal 2000. Energy conservation measure project for Ahwaz Steel Complex in Iran; 2000 nendo kyodo jisshi nado suishin kiso chosa hokokusho. Iran Ahwaz seitetsusho ni okeru sho energy taisaku jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    With an objective to save energy and reduce greenhouse gas emission, a project has been discussed to introduce a gas turbine combined cycle power generation system for effective waste heat utilization and a pellet coating facility into the direct reduction steel making plant of Ahwaz Steel Complex in the Islamic Republic of Iran. The project will have a waste heat boiler installed at the outlet of the MIDREX plant waste heat recovery device to link it with a gas turbine combined cycle power plant to structure a 42-MW power generation system. In addition, productivity enhancement was attempted by applying the raw material pellets with coating to raise the reduction gas blow-in temperature. The energy saving effect expected from this project would be saving of 63,140 tons of crude oil equivalent annually, and the greenhouse effect gas reducing effect would reduce 173,790 t-CO2 annually. Although the investment will require about 3.16 billion yen, the cost reduction amount in association with power generation is small because of the power purchase unit cost being as very low as 1.9 yen/kWh, making the investment recovery period 10.2 years. Therefore, the project will not be realizable economically. (NEDO)

  18. Fiscal 2000 report of investigation. Survey on technological trend concerning in si-tu remediation technology of contaminated soil; 2000 nendo osen dojo no gen'ichi joka gijutsu ni kakawaru gijutsu doko chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    In connection with contamination of soil and ground water, a survey was made on domestic patent information and existing literature or the like, in view of remediation technologies capable of in si-tu or on-site treatment, with arrangement and classification carried out by the method of cleaning contaminants. Arranged and classified were 209 pieces in the patent information, and 145 pieces in the literature from Geo-Environmental Protection Center, an incorporated body. In the methods of extracting contaminants from under the ground, the majority was the methods of pumping up ground water and those of excavating and removing. In the methods of cleaning contaminants, those of 'separation by heat', 'separation/decomposition method using water' and 'suction of gases' are found roughly in equal numbers. In the trend of the patent information, remediation technologies have started in 1990's, while bio-remediation as well as technologies of separation/decomposition through water is still increasing in the number of applications. Meantime, solidification technologies reached a peak around 1998 and have been decreasing in recent years. In the technologies of late, combinations of plural cleaning methods are also seen for the purpose of dealing with contamination with high to low concentration and compound contamination including organo-chloric compounds, heavy metals, etc. (NEDO)

  19. Fiscal 1999 basic survey report for promotion of joint implementation. Study on energy saving and CO2 reduction at Balikpapan refinery; 1999 nendo Balikpapan seiyusho ni okeru shoene CO{sub 2} sakugen chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Concerning the reduction of greenhouse gas emissions for the embodiment of clean development mechanisms (CDMs) in Indonesia, a survey is conducted about energy saving and CO2 reduction at its Balikpapan refinery. At the refinery, a crude-oil atmospheric distillation unit operates at 200,000 BPSD (barrels per stream day) and a vacuum distillation unit at 81,000 BPSD, with the fuel consumed by the two units discharging approximately 470,000 tons/year of CO2. The result of the survey discloses that there is need for some improvement in relation with heat recovery and that the great distance between the two distillation units presents a problem in relation with heat efficiency. To settle the problems, heat recovery will be enhanced and the fuel to be burned in the heating furnace will be reduced. A plan to modify the heat exchanger system is worked out using JGC Corporation's energy-saving technology, and a rough design is drafted for the modification. When the modification is carried out, there will be a CO2 reduction of 18,636-61,597 tons/year. The Pertamina also wants the plan to be realized, wishing that technical and financial aids will be available. The plan when realized will serve as a stimulus to the local community and to the industry as a whole. (NEDO)

  20. Report on results 1998. Research and development on high-temperature superconducting flywheel power storage (investigation on system introduction); 1998 nendo seika hokokusho. Koon chodendo flywheel denryoku chozo kenkyu kaihatsu (system donyu chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    In introducing high-temperature superconducting flywheel power storage equipment to an electrical power system, adaptability is examined and evaluated concerning secondary effect that can be expected while a load leveling function is maintained. The 1998 plan is such that the functions and usages other than the load leveling are put in order for such equipment, and that the effect/adaptability in the case of the introduction into the power system is evaluated by means of simulation and literature studies. The high-temperature superconducting flywheel power storage equipment may be used for such purposes as energy adjustment for a short time, system voltage adjustment and emergency power source, other than the load leveling, on the basis of the characteristics that enable high speed control of active/reactive power and storage/release of energy. Enumerated, as the effects obtainable in introducing these uses into the power system, are enhancement in system stability, improvement in voltage stability, improvement in instantaneous voltage drop, maintenance of system frequency, compensation of fluctuating load, countermeasures against power outrage, and output leveling of intermittent power sources, and these effects were examined. (NEDO)

  1. FY 1997 report on the study on the formation condition of hetero-structure of single-crystalline semiconductor thin films; 1997 nendo chosa hokokusho (tankessho no handotai usumaku hetero kozo no keisei joken ni kansuru kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Since ion implantation causes material degradation by formation of crystalline defects, and hydrogen embrittlement deteriorates material strength, reduction of such defects has been positively studied. Study was made on a new active application of hydrogen separation into ion implantation defects. After H ion implantation of a proper depth into single-crystalline Si and SiC and successive annealing, single-crystalline films of sub-micron to several micron thick were obtained by hydrogen-induced delamination at the implantation depth due to hydrogen embrittlement in crystalline defects. The implantation depth is dependent on implantation energy. H atom forms (111) face defect through connection with dangling bond of crystalline defects. This crystal face defect forms a delamination plane through (100) face cleavage. This hydrogen embrittlement delamination by ion implantation is applicable to production of light-weight high-efficiency single-crystalline Si solar cells, and large single-crystalline SiC wafers as new resource saving process. 33 refs., 19 figs., 2 tabs.

  2. FY1990 research report on the support for promotion of distributed new power source technology introduction and measures for their popularization and lightenment; 1990 nendo bunsangata shinhatsuden gijutsu donyu sokushin shien to fukyu keimo no arikata ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-03-01

    To avoid economic and technological risks upon initial introduction of distributed new power source technology, methods for reduction in the initial investment burden under the lease system and methods for risk reduction under the insurance system are discussed, and each is evaluated for their applicability to the new technology. Methods for popularizing and enlightening the technology are also discussed using the result of a 'survey for promoting the introduction of new energies' conducted into local autonomies assuming the role of diffusing the new technology into the residential and commercial sectors. Through the review of the current status of initial investment burden reduction methods mainly under the lease system and through some case studies, the applicability of such methods to the new technology is discussed. Similar studies are also made by investigating the current status of risk reduction methods and by conducting case studies, these centering on various kinds of machinery insurance. Questionnaires are sent to local autonomies, who play an important part in the initial introduction into and popularization in the residential and commercial sectors, to learn their consciousness of energy problems and of distributed new power source technology introduction. The result is used to review how popularization and enlightenment activities should be conducted. (NEDO)

  3. FY 1997 report on the study on development of corrosion-resistant ceramics for refuse incinerators; 1997 nendo chosa hokokusho (gomi shokyakuroyo taishoku ceramics zairyo no kaihatsu ni kansuru kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper describes development of structural materials for municipal refuse incinerators, in particular, high- temperature corrosion-resistant ceramics for inner walls. Unlike boiler tubes of which inner walls are cooled by water or water vapor, refractory for inner walls is subjected to high-temperature flame over 1000degC, corrosive gases such as HCl and SO2. and low-melting point corrosive dust such as chloride, sulfate and oxide under strong corrosive environment. Experiment was made on 14 kinds of ceramics including commercially available oxide system, non-oxide system and refractory system ceramics. Except graphite system ones, every ceramics, in particular, Al2O3, ZrO2, B4C-doped SiC and CVD-SiO showed superior properties. Commercially available ceramics, in particular, non-oxide system ones are very expensive. Since inner wall materials for refuse incinerators are heat-/corrosion-resistant consumption articles, it is suggested that improvement of reasonable oxide system ceramics or conventional SiC system ones is better. 73 refs., 89 figs., 39 tabs.

  4. Fiscal 1998 overseas geological structure survey. Japan-China joint coal survey Mei-Xian project; 1998 nendo kaigai chishitsu kozo nado chosa hokokusho. Nippon Chugoku sekitan kyodo tansa Mei-Xian project

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Japan-China joint coal survey was made through seismic prospecting by Japanese group and drilling prospecting by Chinese group. Mei-Xian mine property includes coal seams of the Jurassic period, and is covered with the quaternary period stratum without any coal seam. The base of the quaternary period stratum exists at depth of 50-400m, while the coal seams at depth of 300-700m. Among 11 existing seams, the 1st and 5th seams are main objects for prospecting. The 5th seam of 0.2-8.96m (2.95m in average) thick is the most expected important one, distributing all over the mine property. The 5th seam also has branch seams spreading over 2.5km from east to west and 1.2km from south to north in the center part of the mine property. The 1st seam of 0-8.62m (2.90m in average) thick is most thick in the south part of the mine property. The theoretical amount of coal deposits in the whole coal seam is estimated to be nearly 290,000,000t by Chinese group (nearly 50% of it in the 5th seam). That is also estimated to be nearly 346,000,000t by Japanese group (155,000,000t in the 5th seam). Both 1st and 5th seams are composed of sub-bituminous coal. (NEDO)

  5. Fiscal 2000 survey report. Research on bone-forming dental material capable of reducing plaque adhesion; 2000 nendo shiko fuchaku boshigata hone keisei shika zairyo ni kansuru chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Research and development efforts are exerted to produce advanced dental materials equipped with such functions as plaque reduction, bactericidal effect, and early formation of hydroxyapatite (HAP). In the study of fluorine ion implantation for plaque reduction, it is found that in a specimen implanted with fluorine ions the adhesion of carius streptococci is reduced to 1/3-1/10 for the achievement of remarkable improvement. In particular, carious streptococcus multiplication is suppressed when the metal shield layer is replaced with a titanium mesh. For the realization of a thin film formation method for osteoblast multiplication through reforming the material surface in the study of bone-forming dental materials, film formation conditions under which a P/Ca rate which is quite near that of ameloblast are achieved by use of a high frequency magnetron sputtering device. A titanium plate coated with a thus-formed film is annealed for a great increase in its wet contact angle, and then adhesion of bacteria is reduced and an osteoblast multiplication rate is increased by 20% or more, as compared with the case of no treatment in a petri dish. (NEDO)

  6. FY 1997 report on the modification of dental materials with Ag for improvement of antibacterial activity; 1997 nendo chosa hokokusho (gin ion ni yoru shikayo zairyo no kokinsei fuyo ni kansuru kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Improvement of an antibacterial activity is one of the issues in modification of artificial teeth for an aged society. Study was made on improvement technique of an antibacterial activity with Ag ion as secondary corrosion measures. Partial gaps of dental materials themselves and gaps between materials and peripheral tissues causes bad breath or bad teeth through propagation of disease germs. Ag ion is harmless and has an antibacterial activity for bio-tissues from a macro-viewpoint, however, only corrosion germ causing bad teeth in mouths should be sterilized by controlling an elution rate of Ag properly. The antibacterial activity was controlled by controlling Ag ion implantation depth and rate, and Ag elution rate for dental materials. Experiment was made on an IMZ twinplus specimen implanted with Ag ion and an Ag thin film-coated specimen using beagle dog in comparison with an unmodified specimen. As a result, the very favorable antibacterial activity was obtained. Ag ion is effective for prevention of endogenous infectious disease due to mouth germs in dental surgery. 3 refs., 47 figs., 10 tabs.

  7. Report on a commercialization fundamental investigation (in Loajanan South Area, East Kalimantan, Indonesia) in relation to FY 1997 investigations on geological structures in overseas countries; 1997 nendo kaigai chishitsu kozo nado chosa ni kakawaru kigyoka kiso chosa (Indonesia Higashi Kalimantan Loajanan Minami chiku) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    A fundamental coal mine development investigation was carried out in Loajanan South Area, East Kalimantan, the Republic of Indonesia. The investigation included geological and trial drilling investigations, and investigations on open-cut mining development conditions and infrastructures. The geological investigation covered an area of about 10 km {sup 2}, with 20 trial drillings for a total drilling length of about 1800 meters. Thirty-three trial drilling core samples were analyzed. The investigation result may be summarized as follows: coals exist in the north and south areas, whereas the open-cut mining sites in the north area produces limited quantity of coal economically viable; the south area has well grown S1 bed and S2 bed, which are used as the main mining beds, with minable quantity of 12.73 million tons; quality of coal in the north area falls under the sub-bituminous coal B in the ASTM classification, while that in the south area falls under the sub-bituminous coal C; the south area is blessed with coal reserve and infrastructure, and expected of low cost mining requiring less amount of initial investment; and low-sulfur and low-nitrogen coal available in this area are precious when future environmental problems are taken into consideration. 36 figs., 24 tabs.

  8. Fiscal 1997 basic research on coal resource development (total demonstration test). Report on R and D of new exploration technology (exploration of medium-depth coal deposits in water areas); 1997 nendo sekitan shigen kaihatsu kiso chosa (sogo jissho shikenhen) hokokusho. Shintansa gijutsu chosa kaihatsu (suiiki chushindoso tansa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report summarizes the research result on development of new coal exploration technology. For high-precision and high- resolution reflective seismic exploration system, development and improvement were made on hypocenter and receiver to secure a dominant frequency of nearly 150Hz necessary to obtain high resolutions within several meters in analysis precision at coal deposit depths of 700-800m. For development of a hypocenter system, the hypocenter with driving pressure of 210kg/cm{sup 2} composed of 6 GI guns was prepared, and its performance was confirmed through demonstration tests. As for a receiver, a high-sensitivity and high resolution of 34V/bar were attained by grouping 4 piezoelectric devices to improve the performance of an American BC-5 receiver. For a positioning system, the system using GPS was adopted in place of radio surveying. For a trial drilling system, the in-bore trouble prevention system was constructed for quantitative analysis of drilling conditions, and the bit selection manual for high-speed drilling was prepared. (NEDO)

  9. Report on a commercialization fundamental investigation (in Palakan Area, East Kalimantan, Indonesia) in relation to FY 1997 investigations on geological structures in overseas countries; 1997 nendo kaigai chishitsu kozo nado chosa ni kakawaru kigyoka kiso chosa (Indonesia Higashi Kalimantan shu Palakan chiku) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    A fundamental investigation was carried out on coal mine development in Palakan Area, East Kalimantan, the Republic of Indonesia. Based on the existing information available from geological investigations having been performed to date, including trial drilling, the present investigation carried out mapping surveys for new access roads to each trial drilling location and coal bed investigations on the existing open-cut mining sites. The trial drilling investigations were conducted by using grids with about 500 meter interval to identify existence status of coal beds and coal quality. Seven drillings to depths of 170 to 230 m resulted in a total drilling length of 1350 meters. Trial drilling samples were collected from all beds in major coal beds, and analyzed in Japan according to JIS standard. Overall geological analysis including coal quantity calculation by coal beds, open-cut sites and underground mining sites was executed from available geological sketches, geological histograms, coal bed histograms and other existing items of information. Evaluation was given on potentiality of the investigated areas for coal development based on the above analytical results. In addition, infrastructure related investigations were also performed. 29 refs., 114 figs., 37 tabs.

  10. Report on the survey made under the research contract with NEDO, `The International Work Division/Energy Demand Effect Survey.`. Influence of the economic growth in Asia on the energy demand; 1996 nendo `kokusai suihei bungyo energy juyo eikyo chosa` itaku chosa kekka hokokusho. Asia no keizai hatten ga energy juyo ni oyobosu eikyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This report includes surveys on the following: (1) the progress situation of the Asian information society, (2) changes of corporate network, business flow, material flow and money flow in association with the information society, (3) the present situation of the industry-accumulated region in Asia and inter-region network, (4) impacts of the above-mentioned changes on the trade and investment structure in Japan, (5) how to tackle the energy issue in Asia in the future. First, effects of the advance of the information society on energy supply/demand were studied. Next, an analysis was made of effects of the progress of the high-grade information society in Asia on economy, industry and corporate action. The degree of the progress of the information society in Asian countries was made clear from the infrastructure arrangement and the developmental status of application. Contribution of the financial network to the economic growth in Asia and the development were clarified. The organization of corporate networks in Asia where paradigms are converting was made clear to consider industrial clusters in Asia. Last, in the light of the economic relationship between Japan and Asia, a study was made on the future policy of Japan for Asia. 238 refs., 77 figs., 89 tabs.

  11. FY 1995 report on the results of the investigational study on the technology development for the commercialization of solar systems for industrial use, etc. - Investigational study on the solar system. Investigational study on a solar heat utilization system; 1995 nendo sangyoyonado solar system jitsuyoka gijutsu kaihatsu seika hokokusho. Solar system no chosa kenkyu (taiyonetsu riyo system ni kansuru chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This survey clarifies the present situation of the solar heat utilization technology mostly for industrial use, makes a concrete concept of solar heat utilization clear, and extracts items of the technology development and evaluates sociality, economical efficiency, etc. It aims at working out a program for the future technology development. The following proposals were made: 1) technology development program; 2) simulation soft development program; 3) experimental field of the solar heat utilization technology. In 1), concepts of technology development are 'medical use boiling pasteurization,' 'temperature increase in the metal surface treatment process,' 'water purification using photo-catalyst,' 'distributed small power system,' and 'waste water treatment using bio-technology.' In 2), cost reduction is needed for commercialization/merchandising of technology, and therefore, the development of simulation software is studied. In 3), as the experimental field from commercial/residential use system to industrial use system, an large-scale and systematical experimental field is proposed where all that can be substituted for by solar energy among the energies required for the urban function are used. By this, the solar heat utilization system gets accustomed to the people, increases the reliability, and clearly leads to the course to the next stage of the R and D. (NEDO)

  12. Fiscal 2000 technology trend survey. Survey and study report on the development of high-frequency devices to support IT revolution leading to energy use rationalization; 2000 nendo gijutsu doko to chosa. Energy shiyo gorika ni kakawaru IT kakumei wo support suru koshuha device no kaihatsu ni kansuru chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Surveys and studies were conducted for the development of technologies basic to the construction of an ultrahigh-speed huge-capacity high-frequency radio access and communication network, especially the network infrastructure, in the several 10 to several 100 GHz band. Some surveys covered the positioning of high-frequency high-output device modules as the key component, needs for their use in radio communication equipment, devices to be needed for their construction, technologies for their manufacture, process technologies for their embodiment, basic technologies for their materials, and so forth. Some others covered research on the marketability of high-frequency devices in the future, development of relevant technologies abroad, and so forth. The mainstream of high-frequency devices these days rests on the secondary electron gas system based on GaAs and InP, and therefore it is intrinsically difficult for them to yield high outputs. It is deemed to be important to develop technologies based on novel semiconductor materials, such as nitride semiconductors which have excellent properties as materials, toward the construction of a network infrastructure for the next generation. (NEDO)

  13. FY 2000 report on the project on the researcher dispatch type international joint research survey. Survey of the internationalization of research on the effective utilization technology for energy resources; 2000 nendo kenkyusha hakengata kokusai kyodo kenkyu chosa jigyo hokokusho. Energy shigen yukoriyo gijutsu kenkyu kokusaika chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    As to themes of the research survey which contribute to upgrading/diversification of the effective utilization of energy resources and are important in increasing cooperative relations with overseas countries, survey research was conducted by dispatching investigators. Relating to long-life Si solar cells, research survey was made on the reduction in deterioration of solar cell. Concerning the hydrogen carbonless energy system, the economical efficiency of a natural energy/hydrogen combined system was studied for all areas of Aomori prefecture. About the development of the multiple chamber type artificial pancreas for patients with serious diabetes, study using model dogs was investigated. As to the processing of PVC waste, the mechano-chemical method was discussed in the U.S. The paper further surveyed the following: PDE application to the aerospace field, joint developmental study of the reuse type space transport system by Japan and Russia, treatment/recycling of the electric/electronic equipment waste including toxic substances, technology of the manufacture of nano-particles and evaluation of optical characteristics of nano-structures, etc. (NEDO)

  14. Basic investigation on promotion of joint implementation in fiscal 2000. Investigations on modification and improvement project for Potoshani district heating and heat supplying facilities in Romania; 2000 nendo kyodo jisshi nado suishin kiso chosa hokokusho. Romania koku Potoshani chiiki danbo netsukyokyu setsubi no kaishu oyobi kaizen keikaku chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Discussions have been given on the improvement and modification project intended of saving energies and reducing greenhouse gas emission in the Potoshani district heating and heat supplying facilities in Romania. Thirty years have elapsed since the building of the Potoshani district heating and heat supplying facilities, whereas noticeable energy loss has occurred due to aged deterioration, such as thermal efficiency decrease, performance decrease, and hot water leakage due to piping corrosion. The present project is intended to improve the heat production and power generation facility efficiencies, and reduce the heat loss in heat transportation and distribution to less than 5%. The improvements will be implemented by replacing and rehabilitating the existing boilers, replacing the turbine generators, and replacing the transportation and distribution pipelines and heat exchangers. As a result of the discussions, the present project is estimated to result in annual fuel conservation of 35,820 tons of crude oil equivalent, and annual reduction of the greenhouse gas emission of 110,835 t-CO2. The total amount of the initial investment for the project would be 11.369 billion yen, and the payback period would be 12 years. The project will produce profit of 31.358 billion yen in 20 years, thus the project is financially feasible. (NEDO)

  15. Fiscal 1998 research report. Improvement project of low-grade coals in Chongqing City, China for CO{sub 2} reduction (Feasibility study on the production business of coal- biomass briquette); 1998 nendo chosa hokokusho. CO{sub 2} sakugen no tame no Chuka Jinmin Kyowakoku Jukei chokkatsushi no teihin'i sekitanshitsu no kaizen project (Bio briquette seizo jigyo no chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Feasibility study was made on the effect of introduction of production technology of coal-biomass briquette (Japanese coal improvement technology) in Chongqing City on reduction of greenhouse effect gases and acid rain causative substances, and sustainable economic growth. The study result on the feasibility of this project and reduction of greenhouse effect gases was summarized. In this feasibility study, Japan-China joint field survey, and both proximate and ultimate analyses of obtained raw materials were carried out. Based on the experimental result in the pilot briquette plant in Chongqing City, study was made on the necessary of the 1 Mtons/y class pilot plant in the pilot area including Nantong coal mine in Chongqing City, and the location, investment, production cost and distribution means of the plant. Based on the evaluation result on CO{sub 2} reduction effect, economical efficiency, environment effect and social effect, its urgency and effectiveness as international cooperation project by yen credit were also confirmed. It is extremely important to promote localization of the plant in the future. (NEDO)

  16. FY 2000 report on the basic survey to promote Joint Implementation, etc. Survey for improvement of the district heating plant (No. 48) in the Didi-Digomi section; 2000 nendo kyodo jisshi nado suishin kiso chosa hokokusho. Didi-Digomi chiku chiiki danbo plant (No.48) kaizen chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    An investigational study was conducted on the project for energy conservation and reduction in greenhouse effect gas emission at the existing district heating plant in Tbilisi City, Georgia. In the project, the following are conducted for the district heating plants in the Didi-Digomi section and Saburtalo section: renewal/higher efficiency of boiler equipment, adoption of cogeneration using gas turbine, improvement of hot water pipeline and improvement of equipment at heat users. As a result of the study, one plan for cogeneration of 2 units x 6MW class in each section was good in terms of economical efficiency and expenses vs. effects, and the other plan for cogeneration of 17 units (8 units and 9 units) x 6MW class was good in terms of the generated output and regional needs. The amount of energy conservation to be made by the former plan totaled 22,678 toe/y in both sections. The amount of greenhouse effect gas reduction is 70,170 t-CO2/y. The internal earning rate is 1.707% in the Didi-Digomi section and 2.249% in the Saburtalo section. The project profit is lower than the initial investment cost, and therefore, it is necessary to consider the profit from the CO2 emission right. (NEDO)

  17. FY 1998 annual report on the project of basic survey for improving energy consumption efficiency in developing countries / invitation of engineer trainees from developing countries (Indonesia, the Philippines, Vietnam and Myanmar); Hatten tojokoku energy shohi koritsuka kiso chosa nado jigyo / hatten tojokoku gijutsusha shohei jigyo 1998 nendo chosa hokokusho (Indonesia, Philippines, Vietnam, Myanmar)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    NEDO is positively implementing the training programs, in view of importance of training experts on (energy-saving and environmental conservation technologies), by inviting administrators and engineers from developing countries to educate them with Japan's pollution preventive techniques, administration procedures, energy-saving measures, and so on. In FY 1998, NEDO commissioned the International Center for Environment Technology Transfer to train administrators and engineers from Indonesia, the Philippines, Vietnam and Myanmar. This paper describes the proposals, based on the collected answers of the trainees to the questionnaires. The trainees were interested in all themes. About 40% of the trainees considered that the training period was short. Some trainees hoped the training course was held in summer. Difference in industrialization is reflected in difference in recognition and urgency of the environmental problems. Training was conducted by English and Vietnamese, but could be done without translators of Vietnamese. Preparation for the invitation needs a lot of works, and the course should be explained more thoroughly beforehand. It is regrettable that one trainee from Indonesia was late for the course. (NEDO)

  18. Fiscal 1997 basic research on coal resource development (equipment development). Report on R and D of new exploration technology (exploration of medium-depth coal deposits in water areas); 1997 nendo sekitan shigen kaihatsu kiso chosa (kiki kaihatsu hen) hokokusho. Shintansa gijutsu chosa kaihatsu (suiiki chushindoso tansa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report summarizes the research result on development of new coal exploration technology. For a high-precision and high-resolution reflective seismic exploration system, R and D was made on the exploration technology of several meter in resolution for medium-depth (800m) coal deposits under a lake of 2m deep. As a result, the high-frequency and high-power source (150-200Hz in dominant frequency, 700-800m in penetrability) and the high-frequency and high sensitivity receiver (10-1000Hz in frequency band, 35V/PA in sensitivity) were developed successfully, and the positioning system was improved. The final evaluation of these elementary technologies was carried out through demonstration tests, resulting in satisfactory results. For a high-efficiency trial drilling system, the in-bore trouble prevention system for measurement, processing and analysis of drilling data (drilling length, drilling rate, revolution, bit load, torque) and drilling mud data (charge water pressure, charge/discharge water, density, pH, viscosity) was constructed. The outlook for low-cost measurement and a safety during drilling was thus obtained. (NEDO)

  19. Basic research on energy conservation in developing countries. Joint research on oil conservation (research report on the industrial basis of Socialist Republic of Vietnam); Hatten tojokoku energy shohi koritsuka kiso chosanado jigyo sekiyu shohi koritsuka kyoryoku chosa. Betonamu shakai shugi kyowakoku sangyo kiso chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The field research of oil conservation was conducted in developing countries, in particular, Vietnam where a steep increase in oil consumption is anticipated in the future. Energy conservation is the most effective direct measures to control combustion of fossil fuels, and an important issue to be promoted by all countries in the world to prevent global warming and reserve energy resources. In fiscal 1994, main industries in the northern part of Vietnam were researched. In fiscal 1995, the report meeting of plant survey results in the northern part and the technical seminar of energy-saving in industrial field were held, and plants around Ho Chi Minh City in the southern part of Vietnam were researched. Although Vietnam has recently acquired membership in ASEAN and is undergoing dramatic economic growth, has many problems in environmental measures. Japan has top-ranking results on energy-saving in industrial field, and the transfer of such superior technologies and techniques will greatly contribute to resource and global warming problems as well as pollution control measures in Vietnam. 13 refs., 25 figs., 26 tabs.

  20. Survey report for fiscal 1998. Survey of the current state and tasks of research and development of technologies for effectively utilizing CO{sub 2} fixation by higher vegetation; 1998 nendo chosa hokokusho. Koto shokubutsu ni okeru nisanka tanso koteika yuko riyo gijutsu no kenkyu kaihatsu no genjo to kadai ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Investigations and studies are conducted seeking for a CO2 fixation method improved by utilizing the photosynthesizing function of higher vegetation. Details of higher vegetation genes are being disclosed thanks to the rapid progress of studies making use of molecular biological techniques, and the application of the genetic mechanism to scientific and technological fields is becoming increasingly feasible. In particular, the role of the CO2 fixation enzyme RuBisCO has been elucidated almost completely. It has been learned that, in terms of photosynthesizing capability, the C{sub 4} plants (corn etc.) are 2-3 times higher than the C{sub 3} plants (rice, wheat, etc.), and 5-10 times higher than the CAM plants (cactuses etc.). Studies are also under way about the rice genome so that a photosynthesizing capability so high as that of the C{sub 4} plants may be endowed the rice plant. The metabolism and control of useful substances produced in the CO2 fixation process etc. in the higher vegetation are being investigated, and it is now expected that some day such useful substances will be produced and utilized efficiently. Researches are under way into the relationship between the green leaf that is the organ that performs photosynthesis and the organ (sink) that stores and utilizes starch and sugar is in progress, and now a new field is going to open where vegetables will be fully utilized. (NEDO)

  1. Research report for fiscal 1998. Basic research for promoting joint implementation for CO{sub 2} reduction at Keio University; 1998 nendo chosa hokokusho. Keio Gijuku Daigaku ni yoru CO{sub 2} sakugen no tame no kyodo jisshi suishin kiso chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A research is conducted into China's current problems of energy-related environments, and studies are made for the assessment of its potentials for greenhouse gas reduction, such as CO2 from coal, and for the prevention of environmental pollution in urban areas. By the survey of the current states of the supply and demand of energy and heat in China, and in Beijin, it is found that fuel conversion, which means the disuse of coal in this case, is necessary for a success in SO2 measures in the heat supply department. Since the rate of concentrated heat supply undertaken by heat supply businesses is low, it is inferred that potentials for CO2 reduction are quite high in this department. Concerning technological problems about conversion from coal to natural gas and heat supply, deliberation is made on a scenario covering how to approach the energy demand model, combustion in the natural gas boiler, and the home heating fuel. In discussing air pollution in China, the difficulty known as transboundary air pollution is taken up. It is concluded that conversion from coal to natural gas or coal disuse will serve effectively the purposes of energy saving, SO2 reduction, and CO2 reduction. (NEDO)

  2. FY 2000 report on the basic survey to promote Joint Implementation, etc. Survey of the effective use of wastes at palm oil refineries; 2000 nendo kyodo jisshi nado suishin kiso chosa hokokusho. Palm oil seisei kojo ni okeru haikibutsu yuko riyo chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    As to empty fruit bunches (EFB) which are wasted at the Lahad Datu plant of Felda Vegetable Oil Products Co. in Malaysia, a project was studied for energy substitution and greenhouse effect gas reduction by fluidized bed cogeneration facilities using this as fuel. In the project, studied was the introduction of on-site cogenerator of 7,800kW in generating-end output, and that of IPP cogenerator of 16,000kW as reference. As a result of the study, the energy substitution amount in toe in 20 years was approximately 376 k tons in case of on-site power generation/fluidized bed boiler and approximately 695 k tons in case of IPP and fluidized bed boiler. The amount of greenhouse effect gas emission in toe in 20 years was approximately 5,757 k tons and 11,654 k tons, respectively. Concerning the profitability, the internal earning rate was 3.32-8.47% in case of on-site power generation/fluidized bed boiler and 9.13-14.65% in case of IPP/fluidized bed boiler. It indicated the materialization of the project. (NEDO)

  3. Report on projects of the basic survey of effective energy consumption in developing countries and the invitation of engineers of developing countries to Japan (Vietnam, the Philippine, Indonesia and Thailand) in FY 1997; 1997 nendo chosa hokokusho Hatten tojokoku energy shohi koritsuka kiso chosa to jigyo hatten tojokoku gijutsusha shohei jigyo (Vietnam, Philippines, Indonesia Tai)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Based on the significance of technological training for energy saving and environmental protection, NEDO has invited administrators and engineers of four countries in Southeast Asia. Pollution prevention technology, administrative methods and energy saving measures in Japan were lectured in the International Center for Environmental Technology Transfer. The training curriculum included (1) basic law of environment and local administration from the viewpoint of criminal law concerning history of air pollution problems and countermeasures in Yokkaichi petroleum industrial complex, (2) prospect of new energy technology development in Japan relating to the energy saving law, (3) energy saving measures, air/exhaust gas/dust treatment for environmental protection, and actual waste treatment measures by typical individual industries, and (4) significance of common management technology for individual treatment measures. Policies of energy saving and environmental protection and technology information in Japan which can be transferred were provided to two administrators of energy saving in the industry sector of Management of Science, Technology and Environment of Vietnam. 12 figs.

  4. Fiscal 1997 survey report on the jointly executed/promoted basic survey project (the jointly executed activity Japan Program). Feasibility survey for CO2 reduction by deregulating heavy traffic at specified crossings in Bangkok, Thailand; 1997 nendo chosa hokokusho (kyodo jisshi suishin kiso chosa jigyo (kyodo jisshi katsudo Japan program)). Taikoku Bangkok no tokutei kosaten ni okeru kotsu jutai kanwa ni yoru CO2 sakugen kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The monetary crisis in Thailand with the baht drop in July 1997 as a beginning rapidly worsened the Thai economy. With it, the number of automobiles sold sharply declined, and automobile manufacturers were also heavily damaged as seen in the temporary discontinued production, etc. Under such economic situation, a discussion was made on execution of the project with the Thai Automotive Industry Association (TAIA), a partner at the Thai side. As a result, agreement was made on the positioning of the project, role sharing, and selection of measures against heavy traffic as follows: Japan Automobile Manufacturers Association (JAMA) conducts a feasibility study, proposal of a construction plan and confirmation of effects, and bears the costs. TAIA bears the execution and cost of construction (Due to the worsened Thai economy, JAMA paid almost all the construction expenses). In the light of the economic situation in Thailand, `improvement of the signal control system` was selected as an execution candidate, which has the highest cost effect among the measures against heavy traffic. In the future, the application, registration and execution are done for joint activities for the project. 49 figs., 59 tabs.

  5. Fiscal 1993 international research cooperation project. Feasibility study of finding out the seeds of international joint research (technology for environmental preservation using biotechnology, technology for effective use of unused hydrocarbon resource, technology for development of environmental harmony type catalyst); 1995 nendo kokusai kyoryoku jigyo. Kokusai kyodo kenkyu seeds hakkutsu no tame no FS chosa (biotechnology ni yoru kankyo taisaku gijutsu, miriyo tanka suiso shigen no yuko riyo gijutsu, kankyo chowagata shokubai kaihatsu gijutsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This project is aimed at internationally cooperating in the R and D of industrial technology and improving industrial technology of Japan. For it, the following three technologies were investigated: 1) environmental preservation technology using biotechnology, 2) technology for effective use of unused hydrocarbon resource, 3) technology for development of environmental harmony type catalyst. In 1), a survey was conducted of applicability of biological surfactant to prevention measures of pollution by heavy distillate. It showed that part of the biological surfactants is reaching a stage of its being industrially produced by gene recombination bacteria, but as a whole, biosynthetic genes have hardly been elucidated. In 2), a survey of high-grade treatment technology of petroleum coke was made. It pointed out that it is necessary to develop a technology which makes the most of features of petroleum coke and allows defects. In 3), scientists and engineers of Japan and Europe searched for themes on which they can jointly study in the fields of NOx removal catalyst, up-grading of fuel, and development of catalyst combustion of fuel. 287 refs., 136 figs., 128 tabs.

  6. Fiscal 1996 report on the results of the study under a consignment from NEDO of environmental friendly type metal base-materials recycling utilization basic technology and element/overall process. For public; 1996 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko kyodo kenkyu itaku. Kankyo chowagata kinzokukei sozai kaisei riyo kiban gijutsu no kenkyu: yoso sogo process kenkyu seika hokokusho (kokaiyo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    A study of `the next generation new iron steel making process` was conducted in which impurity elements in scrap are removed and recycled into high quality steel making materials, and at the same time total emissions are reduced during the process from scrap melting to steel making. The paper reported the fiscal 1996 results. In the study of the scrap recycling process, conducted were a study of the total system to remove impurities in the high temperature preheating furnace, a large scale experiment of de-coaling combined type de-coppering/de-tinning under reduced pressure of iron melting, a study of recycling technology of dust to the scrap melting furnace, etc. In the study on preheating/melting technology, a study of the scrap melting furnace of high-productivity/low-energy vertical type, a study of the scrap preheating method using the packed bed type preheating furnace, a study on the flue gas control at the time of preheating/melting, a study of the fast assessment method for organic compounds in flue gas, etc. In the evaluation of the total system, a study of preheating/melting/environmental systems using experimental plants. 20 refs., 23 figs., 10 tabs.

  7. Report on a project to support promotion of forming an environmentally friendly energy community. Wastes power generation using urban wastes RDF in the western area of Saitama Prefecture (survey on a business operation FS survey on high-efficiency wastes power generation (utilizing RDF)); Kankyo chowagata energy community keisei sokushin hojo jigyo chosa hokokokusho. Saitamaken seibu chiiki toshi gomi RDF ni yoru haikibutsu hatsuden (kokoritsu haikibutsu hatsuden (RDF riyo) jigyoka FS chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Urban waste RDF manufactured by cities, towns and villages in the western area of Saitama Prefecture are collected on a wide area basis to perform high-efficiency power generation using the RDF as fuel at the Taiheiyo Cement Chichibu Factory. Incineration ash therefrom is regenerated together with ashes generated in other incineration plants in the prefecture to be used as civil engineering and building materials, by using the eco-cement production facilities in the above factory. Evaluation was given on business feasibility of the new wide-area treatment system for wastes and incineration ash treatment aimed at zero emission. The result of the discussion revealed that the business may be realized if the following conditions are met: cities, towns and villages will undertake expense outlay of at least 50,000 yen per ton (including transportation cost), as well as the expense for RDF treatment corresponding to the above ash treatment cost; electric power can be sold at about the same price as the purchase menu for the surplus power from wastes power generation (10.2 yen/kWh); the cities, towns and villages will utilize the eco-cement positively in public civil engineering works upon paying the reasonable price for the eco-cement; high-rate subsidy will be applied; RDF will be supplied on a planned basis; and agreement and cooperation are provided by the concerned areas. (NEDO)

  8. Research report for fiscal 1998 including researches into global environmental problems. Business report on the promotion of interaction of scientists over environmental problems in the Asia-Pacific region; 1998 nendo Asia/Taiheiyo chiiki kankyo mondai kenkyusha koryu sokushin jigyo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Global environmental problems are growing quite serious in developing countries, yet they are requested to properly deal with them without making light of sustainable development, for which international cooperation and diffusion of technologies for the development of environmental technologies are mandatory. Japan, utilizing what it learned from pollution within in the past and making the best use of its technologies and knowledge for environmental improvement in developing countries in Asia, has been hosting since fiscal 1997 a function of Environmental Technology Research Network in the Asia-Pacific Region function. In fiscal 1998, a fifth international symposium was convened at Science City Center at the foot of Mt. Suzuka on November 26 and 27. The central theme was the development of environmental technologies and international cooperation for developing nations, and the event attracted 180 participants from inside Japan and abroad. A number of concrete themes came out of working groups on water quality, air quality, and energy/waste, which concerned the drafting of propositions for international collaborative researches. As for researches abroad, four typical Malaysian institutes were visited. (NEDO)

  9. FY 2000 report on the results of the international cooperative project. R and D of technology for creation of high performance magnetic materials using the microgravity environment; 2000 nendo bisho juryoku kankyo wo riyoshita koseino jisei zairyo sosei gijutsu no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of developing new high performance magnet/magnetostrictive materials, the paper studied the creation technology by the containerless solidification process and unidirectional solidification process using the microgravity environment, and the FY 2000 results were summed up. As to the R and D of Fe{sub 3}/Nd{sub 2}Fe{sub 14}B nanocomposite magnet, by the collision solidification process in which the uniform melt via the microgravity environment is rapidly solidified, {alpha}-Fe that is uniform in composition and is primary-phase is controlled, and the solidified texture made amorphous was successfully acquired. Further studied were the development of magnet material alloys, creation of nitride spring magnet, etc. In the study of the creation of (Dy, Tb)Fe{sub 2} base magnetostrictive materials, the maximum magnetostriction ratio of 4,300 ppm was successfully acquired by the unidirectional solidification in static magnetic field under the microgravity environment. The creation of Tb base super-magnetostrictive AB2 alloys was studied. Besides, studies were made on the formation of peritectic compounds, control of solidification texture of magnet materials, new alloy base high performance magnetic materials, etc. (NEDO)

  10. Fiscal 1996 global environmental industry technology research related project. Report on the results of the consignment project of research and development of technology for reducing carbon dioxide emissions; 1996 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu kanren jigyo. Nisanka tanso nado haishutsu teigen gijutsu kenkyu kaihatsu itaku gyomu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of reducing emissions of carbon dioxide, freon, etc., a research project was carried out of `Research and development of technology for reducing carbon dioxide emissions` which consists of 8 projects. The paper reported the results of the projects. The projects are: (1) Development of waste water treatment of submerged combustion system, (2) Development of thermoelectric generating devices, (3) Development of high performance heat insulation materials, (4) Development of methanol reformer for transportable fuel cell, (5) Development of large pressure reducing valves, (6) Development of large-scale turbo heat pump for district heating and cooling plants, (7) Development of heat pumps for transportation equipment, and (8) Development of thermoelectric cooling devices. In (1), the waste water treatment test was conducted and reached the target. In (2), the thermoelectric device using powder sintering element obtained performance twice the performance level of the existing device. In (3), (4), (5) and (6), the target was all reached. In (7), the results well agreed in a comparison between structural analysis and experiment. The cooling unit by the SPS sintering method using Bi-Te system sintered material element obtained the cooling efficiency almost the same as that by the freon compressor method. 8 refs., 161 figs., 63 tabs.

  11. Fiscal 1997 Project related to research and development of global environment industrial technologies. Report on the results of works commissioned for research and development of technology for reducing carbon dioxide emissions; 1997 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu kanren jigyo. Nisanka tanso nado haishutsu teigen gijutsu kenkyu kaihatsu itaku gyomu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    With an objective of achieving reduction in emission of carbon dioxide and fluorocarbons, the `research and development on technologies to reduce emission of carbon dioxide and other substances` consisting of eight projects were conducted. In research and development of waste water treatment technologies using submerged combustion, studies were performed on removal by combustion of such pollutants as organic compounds, nitrogen compounds, and sulfur compounds. The development targets were achieved on each item. In research and development related with thermal electric power generation elements, semiconductor single crystals were fabricated in order to acquire technical knowledge on thermal power generation elements intended of utilizing industrial waste heat, whereas a simulation technology for designing was developed. In other projects, research and development works were carried out on high-performance heat insulating materials, and a movable methanol reformer for fuel cells. Developments were conducted on a large pressure reducing valve, and a cooling and heating turbo heat pump for regional air conditioning facilities. Research and development were made on Peltier elements, all efforts having achieved results respectively. 134 figs., 65 tabs.

  12. FY 1998 report on the results of the venture promotion type regional consortium- small-/medium-size enterprise creation base type. consortiums. Development of photo-curing containing coating materials for comfortable, healthy indoor environments; 1998 nendo shitsunai kankyo no kaitekisei, kenkosei ni taioshita hikari jugo urushi toryo no kaihatsu seika hokokusho. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This research and development project is aimed at activation of the urushi industry and creation of the new business by utilizing the natural material by the name of urushi solution as the functional coating material satisfying the various conditions required for the coating solutions of the next generation, e.g., healthy, safety, comfortable and environmentally harmless characteristics. The urushi solution developed by this project is an innovative, creative one, which solves the major problems involved in the conventional solution, i.e., slow curing and causing eruption of the skin, by enzyme-aided polymerization and photopolymerization. The physiological activities of the urushi solution component and antimicrobial effects by the urushi layer, which are considered to be the potential functions of urushi, are also investigated for the project. The urushi-containing UV coating material means an ultraviolet-curable urushi/synthetic resin material, composed of refined urushi, a photopolymerizable acrylate compound and photopolymerization initiator. The refined urushi for the urushi-containing UV coating material can be adjusted for its degree of polymerization, as found by the experimental investigation of the catalyst for accelerating enzyme-aided polymerization, to improve curability. The confirmed physiological activities of the urushi component are accelerated solidification of the blood and manifestation of the anti-HIV function. The coating film of the refined urushi is found to be effective against Bacillus coli and Staphylococcus aureus. (NEDO)

  13. Report on final evaluation of 'research and development related to creating a high-level combustion technology utilizing micro-gravity environment'; 'Bisho juryoku kankyo wo riyoshita kodo nensho gijutsu soshutsu ni kansuru kenkyu kaihatsu' saishu hyoka hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-08-01

    Final evaluation was concluded on 'research and development related to creating a high-level combustion technology utilizing micro-gravity environment' having been carried out under a six-year plan which has begun in fiscal 1993. The research works in the project have achieved the development of the measuring technology and device required for research in reduction of NOx emission and the observation and elucidation of different phenomena in lean-burns effective for reducing NOx emission, as well as provision of basic data for systematic evaluation on combustion of spray vapor and particle clusters. In addition, elucidation was made on combustion phenomena in combustion fields related to bulbs including flame bulb, which is difficult to be realized under normal gravity, spray vapor combustion mechanism of fuels difficult to evaporate, secondary micronization properties of emulsified fuels, and behavior of soot during droplet combustion, including high-accuracy acquisition of data on migration. The elucidation of these matters was judged to have accomplished the technologically high achievements in reference to the international levels. Structuring of a database of experimental data of wide range and enormous amount received high evaluation for utilization of the derived basic research achievements. (NEDO)

  14. Fiscal 1996 report on the results of the R and D under a consignment from NEDO of the technology to fix and effectively use carbon dioxide using bacteria and microalgae (for public); 1996 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku (saikin sorui nado riyo nisanka tanso koteika yuko riyo gijutsu kenkyu kaihatsu seika hokokusho (kokaiyo))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of contributing to the solution to the global environmental problem, a technology is developed in which by searching for/breeding/developing bacteria, etc. which conduct photosynthesis highly effectively, CO2 is fixed and recycled. The fiscal 1996 R and D is outlined as the utilization of bacteria, microalgae, etc. Obtained were microalgae exceeding the conventional strains in CO2 fixation ability, and bacteria/microalgae excellent in production of polysaccharides, hydrocarbon, lipid, biological active substances, etc. The fundamental study was continued of CO2 integrated enzyme function/reaction system as molecular biological breeding. In the cell fusion, a set-up of conditions for green algae was started. For the confirmation of performance of high dense/quantity culture technology using solar light, further improvement of performance and systematization, 200L scale testing equipment was manufactured. It is a collective reactor and enabled study of ventilation/agitation and control of light strength. A reactor analysis model was constructed. Also including the conversion into useful substances, energy/material balance was systematically studied. Collection of technical literature and information exchanges were made in Japan and overseas. 276 refs., 475 figs., 156 tabs.

  15. Fiscal 1997 report on the results of the international standardization R and D. Study of the international standardization by the economic evaluation of environmental impacts; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Kankyo compact no keizai hyoka ni yoru kokusai hyojunka no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For the purpose of the international standardization, conducted was a R and D of `the economic evaluation method of environmental impacts.` Survey/analysis were conducted of the trends in the U.S. and Europe where the study on environmental costs is advancing, and study systems were constructed in cooperation with Resources for the Future (RFF), the U.S. Electric Power Research Institute, the University of London, etc. As to impact analysis models, the development of environmental excrement transfer models has been finished, and the development of D-R relational equations which reflected characteristics in Japan has been started. In the joint study with the U.S. RFF, conducted were survey/analysis using the CVM (contingent valuation method). By the comparison of the survey data with actual medical data and comparison with the economic value conversion method, etc., validity and consistency of the CVM method were verified. As a result, it was found that these survey data could be explained without inconsistency. A case study of the environmental cost evaluation was made for electric power, iron/steel and electricity, and it was verified that this developmental method was fully applicable to the environmental impact evaluation of the actual production system. 27 refs., 33 figs., 89 tabs.

  16. Fiscal 1996 report on the comprehensive invetigational research on medical instruments. Development of a trace collection/microanalysis system of blood, etc.; development of a high accuracy three dimensional image diagnosis system; development of a low invasion operation supporting system; development of artificial internal organ technology; 1996 nendo chosa hokokusho sogo chosa kenkyu (iryo kiki). Ketsuekinado biryo saishu/biryo bunseki system kaihatsu, koseido sanjigen gazo shindan system kaihatsu, teishinshu shujutsu shien system kaihatsu, jinko zoki gijutsu sogo kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    In accordance with the rapidly advancing phenomena of decreasing in number of child and aging in Japan, enhancement in quality of medical care and welfare is an issue to be urgently considered, and importance of the support by technology of medical instruments is increasing. The purpose of this research is to extract subjects of the element technology, which will be important strategically and in the long run, from two viewpoints of the needs side and seeds side to study the course of the development of medical instruments. For this, questionnaires were sent out to learned persons in charge of work connected with medical care to grasp the needs for the future development of medical instruments. Based on them, the paper extracted subjects of the element technology which are considered to become strategically important in Japan. The report outlined the investigational research and arranged the methods and results of the survey of the needs for the development of medical instruments. Next, the paper described the method to extract important subjects of the element technology from the needs survey, and then arranged important subjects of the element technology extracted through the study in the committee. At last, the paper generalized the investigational research and summarized the remaining subjects, etc. at the same time. 11 tabs.

  17. FY 1999 report on the results of the project supplementary to the New Sunshine Project - Feasibility of coal hydrogasification technology in China. Investigational study of the social adaptability (Feasibility study of the international cooperation - Report of Beijing Research Institute of Coal Chemistry); 1999 nendo New Sunshine keikaku hojo jigyo (Bessatsu, Kokusai kyoryoku kanosei chosa Pekin Bai kagaku kenkyujo) hokokusho. Sekitan suiso tenka gaska gijutsu kaihatsu - Shakai tekigo sei ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the purpose of establishing the coal hydrogasification technology which has a possibility of producing high-quality substitute natural gas in quantity and at low cost, an investigational study of the social adaptability was made. In this fiscal year, the following were carried out: outlook of energy supply/demand in China and the problems, natural gas resource and the plan for the use, actual state of the town gas business and the future plan, etc. As a part of the study, Beijing Research Institute of Coal Chemistry, China Coal Research Institute, made a survey under the research contract. As to the general situation of natural gas in China, report was made on the following: present situation of the development of natural gas resource in China, present situation of town gas in large cities of China, present situation and outlook of coal development and utilization in China, assessment of the coal mine area adaptable to coal hydrogasification, etc. In the survey of the area suitable for coal hydrogasification, report was made on the present situation and future of energy supply/demand in Shanghai, Shanxi, Shenfua and Xinjiang, present situation and future of town gas supply, etc. Survey/report were also made on the coal hydrogasification technology and the applicability. (NEDO)

  18. FY 2000 report on the results of the project supplementary to the New Sunshine Project - Feasibility of coal hydrogasification technology in China. II - Final report. Investigational study of the social adaptability (Feasibility study of the international cooperation - Report of Beijing Research Institute of Coal Chemistry); 2000 nendo New Sunshine keikaku hojo jigyo (Bessatsu kokusai kyoryoku kanosei chosa Pekin Bai kagaku kenkyujo) hokokusho. Sekitan suiso tenka gaska gijutsu kaihatsu - Shakai tekigo sei ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of establishing the coal hydrogasification technology which has a possibility of producing high-quality substitute natural gas in quantity and at low cost, an investigational study of the social adaptability was made. In this fiscal year, the following were carried out: natural gas resource and the plan for the use in China, actual state of the town gas business and the future plan, etc. As a part of the study, Beijing Research Institute of Coal Chemistry, China Coal Research Institute, made a survey under the research contract. As a result of the survey, the following was found out: In Xinjiang and Urumchi, Uigur Autonomous Region, there is an abundant coal resource that is suitable for coal hydrogasification, the transportation pipeline of natural gas had been constructed, and public facilities are prepared, and therefore, both cities are suitable for the construction of coal hydrogasification plant. Datong, Shanxi Province, is a largest city of coal production, enables the long-term coal supply for coal hydrogasification, and has a plan for remodeling of old facilities and construction of new facilities for the introduction of natural gas, and therefore, the city is suitable for the construction of coal hydrogasification plant. (NEDO)

  19. Survey report for fiscal 1998 on research and development and its staff training. Towards cooperation among Japan, Australia and developing nations in Asia; Kenkyu kaihatsu to sono jinzai ikusei 1998 nendo chosa hokokusho. Nippon, Australia oyobi Asia no hatten tojokoku no kyodo wo mezashite

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This paper makes an analysis on the characteristics of R and D concerning Australia, one of the core nations in the cooperation, on the basis of the idea that 'establishment of new comparative superiority through cooperation' can be realized by joint work among Japan, Australia and Asian nations. In Australia, it was found that R and D was often promoted through a new idea obtained by recruiting heterogeneous persons and communicating mutually internally. It was also found that in Australia an affinity exists to such persons of different nature. Accordingly, Australia was presumably quite suitable for the place to bring up the persons of developing nations. On the basis of these analytical results, proposal was made to promote three programs; namely, preparation of a data base for R and D organizations and the staff, commencement of a partnership program, and opening of a needs searching conference. (NEDO)

  20. Fiscal 1997 report on the survey of verification of geothermal exploration technology, etc. 1. Development of the reservoir variation exploration method (development of the fracture hydraulic exploration method); 1997 nendo chinetsu tansa gijutsu nado kensho chosa. Choryuso hendo tansaho kaihatsu (danretsu suiri tansaho kaihatsu) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper described the fiscal 1997 result of the fracture hydraulic exploration method as the variation exploration method of geothermal reservoirs. By elucidating hydraulic characteristics of the fracture system forming reservoir, technologies are established which are effective for the reservoir evaluation in early stages of development, maintenance of stable power after operational start-up, and extraction of peripheral reservoirs. As for the pressure transient test method, a test supporting system was basically designed to obtain high accuracy hydraulic parameters. As to the tiltmeter fracture monitoring method, a simulation was made for distribution of active fractures and evaluation of hydraulic constants without drilling wells. In relation to the two-phase flow measuring method, for stable steam production, the use of the orifice plate, the existing flow measuring method, etc. was forecast as a simple measuring method of the two-phase state of reservoir. Concerning the hydrophone VSP method, a feasibility study was made of the practical VSP for high temperature which can analyze hydraulic characteristics and geological structures around the well at the same time which the existing methods were unable to grasp, and brought the results. Moreover, to make high accuracy reservoir modeling possible, Doppler borehole televiewer was made in each reservoir. 80 refs., 147 figs., 22 tabs.

  1. FY 2000 Report on the results of the research work on the development trends of natural gas conversion technologies into liquefied fuel in Russia; 2000 nendo Roshia ni okeru tennen gas no ekitai nenryoka gijutsu no kaihatsu doko nado ni kansuru chosa kenkyu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Described herein are the FY 2000 results of the experimental studies on making Fischer-Tropsch (FT) synthesis catalysts on a trial basis and their commercialization feasibility, aimed at producing liquefied fuels in Russia. Irkutsk State University is developing the 'Fischer-Tropsh synthesis catalysts for motor fuel production.' It is found that n-alkanes as the diesel fuel component is formed on the Co-{gamma}-Al{sub 2}O{sub 3} catalyst improved mainly by the first transition metals. Possibility is demonstrated that the synthesis gas can be directly converted into the hydrocarbons containing a high proportion of isoalkanes by the process which uses a combination of FT synthesis catalyst and zeolite catalyst. Topchiev Institute of Petrochemical Synthesis is developing the 'catalysts for synthesis of fuel hydrocarbons from the nitrogen-diluted synthesis gas.' It is confirmed by the FT synthesis reaction test with the diluted synthesis gas as the starting material that the fused iron and zeolite components for the binary catalyst, selected as the promising catalyst for production of gasoline fuel, are stable for extended periods of 3 months or longer. (NEDO)

  2. Fiscal 1993 technological survey report. R and D project for industrial science and technology (Assignment by NEDO/R and D of biochip - survey on biological research of biochip); 1993 nendo bio soshi no kenkyu kaihatsu seika hokokusho. Bio soshi seibutsu kenkyu chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-04-01

    As a part of the R and D of a biochip, for the purpose of establishing fundamental technology in connection with a biochip having a new function that is nonexistent in a semiconductor, a committee for biological research and survey of biochip was organized, operating research activities, surveying and compiling research situations and technological trend at the forefront of each field, in regard to information processing in the biological field, brain-memory related information processing in the medical field, and biologically simulated information processing in the engineering field. The results were summarized in the following seven areas. 1. neurology of memory, 2. the frontal lobe and recognition, 3. function of the olfactory lobe and neural connection between the olfactory lobe and the hippocampus, 4. the cerebral fundus nucleus and function, 5. coordinate change from vision to motion in the brain, and 6. control of transient potassium current by the astroglia cell in the mouth and the hippocampus cultured nerve cell. (NEDO)

  3. Results of load-leveling capacitor system demonstration tests. Report on the results of a NEDO-commissioned work for fiscal 1997 (book of characteristic test data); Fuka heijunkayo capacitor system no jissho chosa. 1997 nendo itaku gyomu seika hokokusho (tokusei shiken data)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Tests are conducted on a capacitor system unit cell built for power leveling and data are collected, to be outlined below. Enumerated in the report are, concerning the unit cell capacitor, the target specifications, external shape, capacity/resistance distribution in the manufactured capacitor, and a photograph showing the appearance; concerning the charge/discharge capacity and internal resistance characteristics, the method of testing static capacity and internal resistance characteristics, test result, test data, and the analysis of the test data; concerning the energy density, volume energy density and weight energy density; concerning the charge/discharge efficiency, the method of testing charge/discharge efficiency, test result, and the test data; concerning the self-discharge characteristics, the method for testing self-discharge characteristics, test result, and the test data; and, concerning changes in characteristics in response to different ambient temperatures, the temperature-dependent characteristics of static capacity and internal resistance, test data about the temperature-dependent characteristics of capacity and resistance, and the temperature-dependent characteristics of self-discharge and the test data

  4. Achievement report for fiscal 1998 on the preceding research related to global environment industry technologies. Survey and research on reduction of nitrogen monoxide; 1998 nendo chikyu sangyo gijutsu ni kakawaru sendo kenkyu asanka chisso no haishutsu teigen ni kansuru chosa kenkyu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Nitrogen monoxide is a strong greenhouse effect gas having warming up index per molecule 300 times greater than that of CO2, and is designated as the object of reduction in the Kyoto Conference. The present preceding research discusses necessity of performing research and development works related to reducing the emission of nitrogen monoxide, and if it is necessary, places the final objective on proposition of what researches should be planned. Fiscal 1997 being the first fiscal year of the preceding research has surveyed emission amount from different emission sources, and enumerated the research and development assignments. Fiscal 1998 falling under the final fiscal year summarizes the emission amount including the future trends, surveys the feasibility of the promising technological measures through experiments, and proposed finally a research and development plan desired of implementation in the future. The proposal contains a research plan placing development of nitrogen monoxide decomposing catalysts and automobile catalysts as the main objectives. Among the domestic nitrogen monoxide generating sources, about 2/3 is the man-made generation sources, hence catalysts, if developed, may be applied to such facilities as combustion furnaces. (NEDO)

  5. Project for the basic survey of enhancing energy consumption efficiency in developing countries. Summary of the Conference on the Policies and Measures of Climate Change Mitigation; Hatten tojokoku energy shohi koritsuka kiso chosa nado jigyo. Kiko hendo kanwasaku no seisaku to sochi ni kansuru kokusai kaigi hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The Conference on the Policies and Measures of Climate Change Mitigation was held in Tokyo on January 28, 1997, with participation in the conference from governments, research institutes, industrial circles, NGO, etc. of ten countries including Japan. In the session `technology transfer,` presentations were made on `the current status of the technology transfer, and the expectation and requests` by Australia and Japan which provide technology and by China which receives technology. As a whole, every country recognized importance of technology transfer of both hardware and software, private sectors` taking leadership, the use of international organizations dealing with fund supply and credit guarantee. In the session `tradable permits/quotas,` Dr. A. Haspel, U.S. Department of Energy reported the structure and effect of U.S. tradable emission permits on sulfur dioxide from thermal power plants, and proposed tradable emission permits against greenhouse effect gas. The proposal needs to be further studied and discussed, and it was regarded as too early to include the proposal in the protocol to be conducted at COP3

  6. FY 2000 report on the R and D of the particulate utilization type creation technology of biological connective substances. Survey of the technical trend overseas; 2000 nendo biryushi riyogata seitai ketsugo busshitsu nado sosei gijutsu no kenkyu kaihatsu seika hokokusho. Kaigai gijutsu doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The paper summarized the reports on the results of Japanese engineers' participating in the related scientific meetings held overseas as a survey report on the trend of the overseas technology. The scientific meetings they participated in were: 1) Impact of Genomics on Medicine and Pharmacogenomics Europe (Amsterdam; May 15-26, 2000), 2) Drug Discovery Technology 2000 (Boston; August 10-20, 2000), 3) Biotechnology 2000 (Berlin; September 3-12, 2000), 4) PacificChem 2000 (Hawaii; December 14-21, 2000), 5) 4th Winter Conference on Medicinal and Bioorganic Chemistry (Seattle; January 27 - February 4, 2001). Impact of Genomics on Medicine was composed of the following five fields: microarrays, proteomics, functional genomics and target validation, genetic variation technology, and applications of SNP analysis (joint session). Pharmacogenomics Europe was composed of the following four fields: applications of SNP analysis (joint session), SNP assays, targets and compounds, and clinical applications. (NEDO)

  7. Model operation to improve energy consumption efficiency in developing countries. Demonstration study (investigation project) on material preheating equipment for an electric furnace (using reduced iron as a raw material); Hatten tojokoku energy shohi koritsuka model jigyo. Denkiro no genryo yonetsu sochi (kangen tetsu genryo) ni kakawaru jissho kenkyu (chosa jigyo) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Investigations were given on a device technology that can obtain energy saving and environment preserving effects in electric furnace iron making using reduced iron as a raw material. The effects can be obtained by continuously charging into an electric furnace the reduced iron supplied from an iron ore reducing plant while the iron is kept hot. The investigations were carried by sending survey groups to India and Mexico who are producing reduced iron, and Egypt and Malaysia who possess iron reducing technologies, and by analyzing the actual conditions of reduced iron manufacturing equipment and electric furnace facilities. In addition, retrieval, collection and analysis were performed on technical data and information on reduced iron available inside and outside the country. As a result, a proposal was made to select India as a site to execute the demonstration study on the hot reduced iron insertion technology. The reasons for the selection are: India has a large number of steel mills that have iron reducing facilities and electric furnaces; the country is geographically convenient for Japanese research institutes to implement the demonstration study; the country`s DRI production is the largest in the south-eastern Asia; and electric power cost is high. 92 refs., 49 figs., 30 tabs.

  8. Report on commissioned business for fiscal 1997. Development of new power storage system for cells and development of technology for distributed power storage (research for a zinc/air cell system for automobiles); 1997 nendo itaku gyomu hokokusho. Shingata denchi denryoku chozo system kaihatsu bunsangata denryoku chozo gijutsu kaihatsu (denki jidoshayo aen kuki denchi system chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Concerning the above, it is discussed whether such a system is feasible in Japan. A zinc/air cell system requires some special plants for zinc regeneration, etc. It is necessary to build a zinc refining plant and to install dozens of electrode replacing facilities in an area dozens of kilometers in diameter with the plant at the center. For such a system to be functional, there have to be several tens of thousands of automobile users in a limited area. In Japan, so large a number will not be found anywhere even if the appeal is directed to those in the postal service and electric utilities. There will be no economic success in Japan, different from in Germany. As for the economic comparison between a zinc/air cell system and natural gas system, the two will be equivalent to each other as far as the use of the quick filling stations for the natural gas automobiles remains as it is. When the number in consideration is so large as several tens of thousands, however, the natural gas system will turn out to be economically superior to the zinc/air cell system. 19 figs., 29 tabs.

  9. Fiscal 1997 report on the verification research on geothermal prospecting technology. Theme 4. Development of a reservoir variation prospecting method (development of a micro-earthquake monitoring system (MEMS)); 1997 nendo chinetsu tansa gijutsu nado kensho chosa. 4. Choryuso hendo tansaho kaihatsu (jishinha tansaho kaihatsu) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    To evaluate geothermal reservoirs in the initial stage of development and keep stable output in service operation, the application of MEMS is under development. This paper describes the result in fiscal 1997. Installation of 3-component velocity type seismometers in bore holes is desirable for permanent monitoring sites. Their arrangement should be determined by detection ability simulation. Their locations at various elevations are effective to improve the accuracy of hypocenter determination. Digital seismic data at the permanent sites are transmitted to a center through cables, while temporary data are recorded on site. For poor MEPAS, a Windows program of basic functions was developed. 3-D seismic velocity analysis and array monitoring system were also studied. A P-wave velocity of rocks decreased by 25% by formed two-phase region, and increased by 10% by decrease in reservoir temperature from 200 to 100degC. The velocity can be detected by change in travel time of direct waves due to considerable variation in reservoir environment. VSP technique using a vibrator or air gun as artificial hypocenter is effective for MEMS. 67 refs., 64 figs., 19 tabs.

  10. Basic investigation on promotion of joint implementation in fiscal 2000. Efficiency improvement project for district heat supplying plants in Dailian City in China; 2000 nendo kyodo jisshi nado suishin kiso chosa hokokusho. Chugoku/Dailian shi chiiki netsu kyokyu plant kokoritsu kaizen project

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Investigations and discussions have been given on energy saving possibilities at two medium-sized heat and power supplying plants in the city of Dailian in China. The project will improve the operation methods of the heat and power plants so that the energy cost can be minimized, and attempt to improve the boiler heat efficiency and save the energy by means of heat recovery and utilization. The draft modification plan for energy conservation has planned operation optimization for energy conservation, control of boiler operation under variable pressure, modification of the external boiler heat converter, use of inverters for the large capacity motors for boilers, and recovery of heat from the boiler blow-down water. In the analysis, models were structured from the operation data, and the effects of applying the energy saving measures were derived from simulation. As a result, the energy saving effect was found to be about 13,000 tons at the Chunhai plant and about 7,000 tons at the Pulandian plant annually (converted to oil). The reduction in greenhouse gas emission was found to be about 40,000 tons at the Chunhai plant and about 20,000 tons at the Pulandian plant annually. The number of years for investment payback is about 4.1 years at the Chunhai plant, and about 4.9 years at the Pulandian plant, wherein good profitability can be estimated. (NEDO)

  11. FY 2000 report on the basic survey to promote Joint Implementation, etc. Project for improvement of efficiency of the power generation/desalination plant in Aktau City; 2000 nendo kyodo jisshi nado suishin kiso chosa hokokusho. Aktau shi hatsuden zosui plant koritsu kaizen jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of conserving energy and reducing greenhouse effect gas emission, feasibility study was conducted for improvement of efficiency of power generation/desalination facilities at MAEK Energy Center, Aktau City, Manghistau, Kazakhstan. Presently, the main facilities are the conventional natural gas fired power plant, evaporation type seawater desalination facility, hot water production facility, etc. In the project, introduction of the following was planned to be made: cogeneration facility composed of two units of 1,100-degree C class gas turbine and reverse osmosis (RO) type desalination facility for drinking water production with a capacity of 50,000 t/d. As a result of the study, the energy conservation amount in this project was 151,900-165,400 toe/y in power generation facility, and the greenhouse effect gas reduction amount was 355,000-387,000 t-CO2/y in power generation facility and 268,000 t-CO2/y in desalination facility. The construction cost and operational cost of the plant were 45.7 billion yen and 2.8 billion yen/y. In the economical estimation, ROI and ROE before tax were 7.4 and 34.8, respectively, which were considered to be appropriate values as social infrastructure related conditions. (NEDO)

  12. Fiscal 1997 survey report. Subtask 9 (hydrogen utilization worldwide clean energy system technology) (WE-NET) (survey/study on the innovative and leading technology); 1997 nendo seika hokokusho. Suiso riyo kokusai clean energy system gijutsu (WE-NET) subtask 9 kakushinteki, sendoteki gijutsu ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For the purpose of giving useful suggestions/proposals to the course of WE-NET and contributing to the R and D, conducted were survey/collection/evaluation of new technologies. The paper described the fiscal 1997 results. The number of the proposals of new technology accumulated during fiscal 1993 to 1997 is 28. The proposals of new technology made in fiscal 1997 are hydrogen production effectively using solar energy by wavelength zone, hydrogen storage using fullerene, and the methanol power generation turbine system. Four technologies proposed in fiscal 1996 and 1997 were evaluated. The evaluation method requires two steps of the marking using the analytic hierarchy process (AHP) and the adjustment by the committee. The highly evaluated proposals out of those having been made were analysis/evaluation of hydrogen-oxygen internal-combustion Stirling engine, hydrogen production effectively using solar energy by wavelength zone, hydrogen production by solid oxide electrolysis, magnetic refrigeration method for hydrogen liquefaction, hydrogen production technology using photocatalyst, etc. The paper also stated the result of studying concepts of innovative/leading technologies in fiscal 1996. 4 figs., 29 tabs.

  13. Fiscal 1997 report on the verification research on geothermal prospecting technology. Theme 3. Development of a reservoir variation prospecting method (development of electric/electromagnetic prospecting methods); 1997 nendo chinetsu tansa gijutsu nado kensho chosa. 3. Choryuso hendo tansaho kaihatsu (denki denjiki tansaho kaihatsu) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    To evaluate geothermal reservoirs in the initial stage of development and keep stable output in service operation, measurement of self-potential and resistivity changes due to production and reinjection of geothermal fluid has been made. This paper describes the result in fiscal 1997. To study the placing method and stability of electrodes for continuous self-potential monitoring network in fiscal 1998, continuous monitoring of potential differences started in an experimental field. The placing condition and electrode will be selected by July. By surveying self-potentials after the beginning of operation of Oogiri geothermal power plant, a distribution range of negative and positive potential anomalies was clarified. To predict the resistivity change, long-term change in salinity concentration in a reservoir was estimated by a hydrothermal flow concept model. The resistivity change caused by reservoir variation due to plant operation was also predicted to study its detection by MT method on the ground. The salinity concentration change due to reinjection, and resistivity change due to a two-phase region in the top of a reservoir were considered. 17 refs., 56 figs., 19 tabs.

  14. Survey report for fiscal 1997 on the survey report on the actual state of technical cooperation on industrial technologies by European countries in the South-eastern Asian region; 1997 nendo Tonan Asia chiiki ni okeru Obei shokoku no sangyo gijutsu ni kansuru gijutsu kyoryoku jittai chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The actual state was surveyed on the technical cooperation by European countries in the South-eastern Asian region. The U.S.A. is making research cooperation with Thailand on ethylene molecule structures to enhance productivity in rubber production, France on molecule markers for high production rubber clone selection, and Australia on grain storing and drying methods. For the Philippines, America is giving assistance on management of reproducible resources, France on climate information communications systems for local areas, Australia on grain storing and drying methods, and Germany on waste oil recovery and reutilization, and development of pollution-free energy resources. For Malaysia, the Great Britain is cooperating on building engineering research centers, Australia on search for plant patheology genetic organics available in the Pacific region, and Germany on investigative researches on pollution prevention for tin mines and processing areas, and forestry and plant information systems. With respect to the ASEAN, this paper reports its activities placing importance on biology and electronics engineering, while the organization is taking actions in the areas of foodstuffs, animals, electronics, information and material science, energy exploration, marine and earth physics, and resource development. (NEDO)

  15. FY 1997 report on the study on cryogenic aggregate target PLD process by multi-laser excitation for using gaseous materials; 1997 nendo chosa hokokusho (kitai genryo riyo no tame no taju laser reiki ni yoru gokuteion gyoshutai target PLD process ni kansuru kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper reports the result in fiscal 1995 of the study on PLD (pulse laser deposition) thin film formation process having been made since 1993. In fiscal 1995, the effect of irradiation of excimer laser and YGA(SHG) on ablation of aggregates of N2, CH4, Ar, Kr and Xe, and the effect of time-delayed irradiation of YGA(SHG) and KrF excimer laser on ablation of N2 aggregate were studied aiming at exciting ablation by cryogenic aggregate alone. Experimental results by a newly developed multi-laser excitation experiment equipment are as follows. Ablation was not caused by KrF excimer laser irradiation, while caused by YGA(SHG) irradiation. Ablation was caused by 1mm thick N2 or CH4 aggregate alone. Kr target was the most promising among rare gas solid targets expected as seed of ablation occurrence. Multi-irradiation showed a different ablation behavior as compared with single YGA(SHG) irradiation, and in some cases, multi-irradiation not increased scattering of particles. Time-delayed multi- irradiation (YGA(SHG) excitation after excimer excitation) was effective. 23 figs., 4 tabs.

  16. FY 2000 report on the basic survey to promote Joint Implementation, etc. Energy conservation by modernization of a cement plant (Double Horse Cement Co.) in China; 2000 nendo kyodo jisshi nado suishin kiso chosa hokokusho. Chugoku cement kojo (Double Horse Cement) kindaika ni yoru sho energy

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    An investigational study was conducted of possibilities of energy conservation and greenhouse effect gas emission reduction in the cement production process of Double Horse Cement Co., Mianyang City, Sichuan Province, China. Double Horse Cement adopts the wet type long kiln production system and has a production ability of approximately 1.5 million t/y. In the project, as to three production lines out of the six production lines, improvement was planned to be made of the technologies on the following: mixing of raw materials, grinding of raw materials, NSP, clinker cooler, clinker pre-grinder, high-efficiency separator, waste heat use power generation, etc. As a result of the study, it was found that the energy conservation amount obtained was 54,646 toe/y. And, the amount of greenhouse effect gas reduction was 169,086 t-CO2/y. The total fund required for this project was approximately 5.553 billion yen and the internal earning rate was 7.36% after tax. When the project is carried out, expenses vs. effects are 9.8 toe/million yen in energy conservation amount and 30.4 t-CO2/million yen in greenhouse effect gas reduction. (NEDO)

  17. Report on survey in fiscal 2000 on the survey on succession of history of industrial technologies. Survey edition of industrial technologies in Japan that have contributed largely to development of industries; 2000 nendo sangyo gijutsu rekishi keisho chosa hokokusho. Sangyo no hatten ni okiku kiyoshita kokunai sangyo gijutsu no chosahen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Surveys and researches have been performed to serve as reference for the future research and development policies by clarifying the innovation process of industrial technologies in Japan and the originality and creativity seen in that process. The surveys have focused on processes born in Japan and evaluated as 'world class' in significance of some kind, and summarized the technology history. The current fiscal year has surveyed newly the following nine processes: industrialization of the sodium glutamate and fructose manufacturing technologies, development of solar cell technologies, industrialization of the manufacturing process of cyclohexnol via cyclohexene, development of the MEK manufacturing process, development and industrialization of hollow fiber reverse osmosis membrane modules for single stage sea water desalination, development and industrialization of the new vitamin B1 intermediate process, development of HSG-Si capacitors for semiconductor memories, and development and industrialization of 4-ethylene fluoride/ethylene copolymer (ETFE). The surveys are considered to have obtained the results abound in suggestions toward original and creative technological developments. (NEDO)

  18. Research report for fiscal 1998 on the basic research on the promotion of joint implementation and so forth. Project for converting Russian Federation's Amursk coal-fired power plant into natural gas-fired power plant; 1998 nendo Roshia renpo AMURSK sekitandaki hatsudensho tennen gas nenryo tenkan keikaku chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A study is made about the application of joint implementation, which is one of the flexibility measures adopted by the Third Session of the Conference of the Parties to the United Nations Framework Convention on Climate Change, to a coal-fired power plant of Amursk, Russian Federation, for conversion of its fuel to natural gas. An only 40km-long pipeline will enable the plant to receive natural gas. A 200MW-class combined cycle plant will be added. Only 2 of the 9 existing boilers will be modified for use as backups. Since the price of electricity or heat is quite low, the facilities as they are will not fulfill the cost-performance goal. If the power rate is slightly hiked or the construction cost is reduced by 20%, however, the expected goal will be achieved. Fuel conversion and improved thermal efficiency will result in a 980,000-ton per year reduction in CO2, and a cumulative CO2 reduction of 24,230,000 tons will realize by the end of the plant service life of 25 years. The rate of the cumulative reduction against the invested capital will be 0.115 tons of CO2 per one US dollar. As for the term of works, 1 year and 8 months (January 2000-August 2001) will be necessary for preparation, and 2 years and 7 months (September 2001-March 2004) for the construction, a total of 4 years and 3 months. The reduced discharge of smoke and dust and SOx will greatly improve on the environment. (NEDO)

  19. Fiscal 1993 international research cooperation project. Feasibility study of finding out the seeds of international joint research (technology for environmental preservation using biotechnology, technology for effective use unused hydrocarbon resource, technology of solid electrolyte fuel cells for high-efficient electric vehicles); 1993 nendo kokusai kenkyu kyoryoku jigyo. Kokusai kyodo kenkyu seeds hakkutsu no tame no FS chosa (biotechnology ni yoru kankyo taisaku gijutsu, miriyo tanka suiso shigen no yuko riyo gijutsu, kokoritsu denki jidosha no kotai denkaishitsu nenryo denchi gijutsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    This project is aimed at internationally cooperating in the R and D of industrial technology and improving industrial technology of Japan. For it, the following three technologies were investigated: 1) environmental preservation technology using biotechnology, 2) technology for effective use of unused hydrocarbon resource, 3) solid electrolyte fuel cell (SOFC) technology for high-efficient electric vehicles. In 1), bio-remediation is a choice as the result of trially using technologies for remediation of the environment polluted by pollutant, but it is not a technically completed one, but one which will be improved by trial and error. By the application of gene engineering, the use of gene recombination enables wide spread of decomposition genes. In 2), technical subjects were studied such as superheavy distillate, oil shale, coalhead methane and methane hydrate. In 3), designed were cylinder type and planar type SOFC of 850degC operation and 10kW output. Accumulation and weight of a total SOFC system are 81 liters and 100 kg in cylinder type and 136 liters and 200 kg in planar type. The vehicle can be equipped with the SOFC. 171 refs., 72 figs., 54 tabs.

  20. Fiscal 1998 R and D project on global environmental industrial technology. Research result report on DNA analysis and information processing technology for photosynthesis microorganisms (Development of CO{sub 2} fixation and effective use technology by using bacteria and algae); 1998 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo. Kogosei biseibutsu nado DNA kaiseki joho shori gijutsu no kenkyu (saikin sorui nado riyo nisanka tanso koteika yuko riyo gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report summarizes the fiscal 1998 research result on DNA analysis and information processing technology for photosynthesis microorganisms. On the study on DNA analysis technology by triple-strand formation method, as the comparison study result of a READ method, stable triple- strand formation method and hairpin method, a READ method showed the highest triple-strand formation efficiency for target DNA. On the study on accurate separation technology of specific genes, establishment of protocols was promoted for solid-phase probe technology, subtract technology and leveling technology. On the study on DNA microarray analysis technology by high-efficiency hybridization method, the analysis technology of genes by hybridization method using DNA chips is under investigation. In addition, the high- efficiency analysis technology of specific DNA segments by using an affinity sensor, and the high-accuracy cloning technology for DNA with altered primary structure were also studied. (NEDO)

  1. Report of the results of the fiscal 1997 regional consortium R and D project. Regional consortium field / Development of technology to treat aquatic environment by using microorganisms fixed on carbon fabrics (abbreviation: carbon/aquatic environment project) (first fiscal year); 1997 nendo chiiki consortium kenkyu kaihatsu jigyo. Chiiki consortium bun`ya / tanso sen`i nansoshiki eno biseibutsu kochaku gensho wo riyoshita mizukankyo seibi gijutsu no kaihatsu (ryakusho: tanso mizu kankyo project) daiichi nendo seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Out of the development of technology to arrange the aquatic environment using phenomena of microorganism fixation on carbon fiber soft textures, the paper stated the fiscal 1997 result. On carbon fibers in a state of swaying in water, microorganisms in water fix in an amazingly large quantity. A catalog was compiled of 58 kinds of carbon fabrics trially woven and knitted. When carbon fiber is used as activated sludge carrier, activity of microorganism lasts more than one year. Only a little amount of surplus sludge is generated. The fixed microorganisms are more active in case of carbon fiber than in case of nylon and polyester fibers. Fiber texture models of carbon fiber fixing activated sludge groups were proposed. By pump operation, the water flow inside/outside microorganism groups is being accelerated. Several new strains of bacillus carboniphilus were isolated/identified from soil and marsh. To grasp relationships of characteristics among three elements such as the state of aquatic environment, fiber, and microorganism group, the experiment was prepared. Preliminary work is conducted to derive a simple equation for facility design, and experimental directions to obtain design conditions were proposed. 6 refs., 166 figs., 47 tabs.

  2. Fiscal 1999 research and development of technologies for practical application of photovoltaic power generation systems. Research and development of photovoltaic power utilizing system and peripheral technologies (Research and development for enhancing reliability of photovoltaic power generation - Research on long-term reliability of inverter); 1999 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Taiyoko hatsuden riyo system shuhen gijutsu no kenkyu kaihatsu (taiyoko hatsuden no shinraisei kojo ni kansuru kenkyu kaihatsu - inverter no choki shinraisei no chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    In fiscal 1999, the power conditioner which is the primary component of a photovoltaic power system was subjected to an accelerated test, etc., for the evaluation of its durability. For the accelerated test, operating conditions were so set that acceleration be implemented according to Arrhenius' law at ambient temperature 40 degrees C and relative humidity 36%. For the operation of the power conditioner, it was so set that the operation duration be 3.5 hours with a rest time of 4.5 hours for the night or the like. In the accelerated test conducted as in the previous year, 1100 cycles were completed recording the maximum, equivalent to approximately 8-1/2 years according to Arrhenius' law. After the test, no life affecting changes were detected in specimen device A, B, or D. Specimen C, however, failed during the test. As for the evaluation of durability of components, the electrolytic capacitor in the power conditioner was named. Reliability related literature was investigated and a durability evaluation test was started, with consideration given to the voltage to apply and service temperature. (NEDO)

  3. FY 1998 annual report on the development of laser-aided, noncontacting, realtime, in-process dressing method using a grinding stone with ultrafine abrasive grains, and study on techniques for applying the method to grinding stone of superthin blades; 1998 nendo laser wo mochiita choteiryu toishi no hisesshoku real time inprocess dressing ho no kaihatsu oyobi gokuusuha toishi eno tekiyo gijutsu ni kansuru kenkyu chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A new noncontacting dressing method using a laser as a tool has been studied and developed, in order to develop environment-compatible, energy-saving type machining machines. In this study, a cup-shaped grinding stone is developed for grinding performance testing by micron-order diamond abrasive powder, used for producing a grinding stone of superthin blades, is mixed with a cast iron binder, molded and sintered. In the grinding performance test, zirconia as a work is ground at a constant pressure to the grinding stone working surface before and after the laser-aided dressing, to analyze grinding/removal efficiency and grinding resistance. The grinding stone working surface conditions are observed by a scanning electron microscope after the laser-aided dressing, to correlate the surface conditions with the grinding data. It is found that the laser-aided dressing method needs no lubricant, is clean, cutting grinding time when incorporated in the machining process, suitable for grinding stone of low stiffness and ultrathin blades by use of ultrafine abrasive grains, suffering no exfoliation of the diamond grains, and hence economical. (NEDO)

  4. Fiscal 1999 research report. Basic research for promotion of joint implementation programs (Comprehensive feasibility study on efficiency improvement of heat generation facility and heat network for district heating at middle and small cities in Moscow region, the Russian Federation - 2 model cities within the region); 1999 nendo Russia renpo Moscow shunai chusho toshi ni okeru chiiki danboyo netsu kyokyu shisetsu yusomo no koritsu kaizen keikaku sogo chosa hokokusho. Shunai 2 toshi wo model to suru

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The above-named effort aims to work out modification plans and to predict their energy saving, energy substituting, and greenhouse gas reduction effects, and thereby to scout out a project which will effectively utilize flexibility-ensuring 'joint implementation' for the attainment of greenhouse gas reduction levels defined at COP3 (Third Session of the Conference of the Parties to the United Nations Framework Convention on Climate Change). The results of assessment of this project based on the outcome of the survey show that (1) there is necessity for the project and that the presence of needs to be urgently satisfied is clear, that (2) energy saving, energy substituting, and greenhouse gas reduction effects are proved to exist and that the project is therefore an appropriate candidate for an activity to be implemented jointly, that (3) Russian agencies concerned are strongly interested in the project and that a sufficiently cooperative system will be available toward implementation, and that (4) there is an extremely large room for energy saving in the district heating oriented heat supply business in Russia and that probabilities are quite high that natural gas-fired turbine cogeneration plants capable of improving overall energy efficiency will enjoy extensive diffusion. (NEDO)

  5. Fiscal 1998 survey report. Medical equipment (Development of fine sampling/analysis system for blood / Development of high-precision 3-D image diagnosis system / Development of low-invasion operation support system / Total development of artificial internal organ technologies); 1998 nendo chosa hokokusho. Iryo kiki (ketsuekinado biryo saishu, biryo bunseki system kaihatsu/koseido sanjigen eizo shindan system kaihatsu/teishinshu shujutsu shien system kaihatsu/jinko zoki gijutsu sogo kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For efficient medical care supply systems, the R and D of advanced medical care technology and equipment largely contribute to productivity improvement for medical care services. Among them, a progress of medical care technology is becoming important for preparation of efficient and fair supply systems. MITI thus established 'Medical care and welfare equipment development project' in 1994, and has promoted the strategic long-term R and D project of medical care and welfare equipment as joint R and D project of NEDO and private enterprises. In fiscal 1998, on the development of the fine sampling/analysis system for blood, the high- precision 3-D image diagnosis system, the low-invasion operation support system, and the artificial internal organ technologies since fiscal 1996, this project clarified essential technical issues based on the future view, selected some themes to be newly developed in the future, and surveyed and evaluated the details of their R and D concretely. (NEDO)

  6. FY 2000 report on the results of the development of technology for commercialization of the photovoltaic power system - Development of production technology of thin film solar cells. Separate Volume 1. Development of production technology of low cost/large area modules (Investigational study on the commercialization analysis); 2000 nendo New sunshine keikaku seika hokokusho. Taiyoko hatsuden system jitsuyoka gijutsu kaihatsu {sup H}akumaku taiyodenchi no seizo gijutsu kaihatsu{sup -} Tei cost dai menseki mojuru seizo gijutsu kaihatsu (Jitsuyoka kaiseki ni kansuru chosa kenkyu) - 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of supporting the study of commercialization of thin film solar cells for electric power use and the study of production technology of thin film solar cells, survey of the technical trend of the thin film solar cell was conducted, and the FY 2000 results were summed up. The typical Si system thin film solar cell is the amorphous Si solar cell, and the quantity production has already started in Japan and abroad. Further, with the aim of making use of characteristics of the amorphous Si solar cell and also making its defects up, the development of Si thin film solar cell using microcrystal Si and polycrystal Si is greatly expected. Among those, attention is paid to the hybrid type that was proposed for the remarkable improvement in the conversion efficiency of amorphous Si solar cell. In the compound thin film system, the Cu(InGa)Se{sub 2}(CiGS) solar cell was put on the market as product by SSI, though the market scale is small. Further, as to the CdTe thin film solar cell, trial manufacture of the large area module was made in view of the housing use. In addition, there was seen great progress in the color sensitized cell and organic semiconducting solar cell mainly in the U.S. and Europe. (NEDO)

  7. FY 2000 report on the results of the development of technology for commercialization of the photovoltaic power system - Development of production technology of thin film solar cells. Separate Volume 2. Development of production technology of low cost/large area modules (Investigational study on the commercialization analysis); 2000 nendo New sunshine keikaku seika hokokusho. Taiyoko hatsuden system jitsuyoka gijutsu kaihatsu {sup H}akumaku taiyodenchi no seizo gijutsu kaihatsu{sup T}ei cost dai menseki mojuru seizo gijutsu kaihatsu (Jitsuyoka kaiseki ni kansuru chosa kenkyu) - 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of grasping/analyzing the technical trend of low cost/large area modules of thin film solar cells in Japan and abroad and of promoting a developmental study of the element technology necessary for commercial production of thin film solar cells, an investigational study was made in the section meeting of thin film technology by learned people in industrial/university/official circles, and the FY 2000 results were summarized. The 1st section meeting was held in September, and discussion was made about the developmental plan in FY 2000 and the state of progress. The 2nd section meeting was held in January, and discussion was made about the state of progress. As to the state of progress of the project for technology development, report/discussion were made about the following: development of low cost production technology of large area glass substrate modules, development of low cost production technology of large area flexible modules, development of production technology of high reliability CdTe solar cell modules, development of production technology of CIS solar cell modules, development of production technology of thin film polycrystal solar cells, development of production technology of application type new structure thin film solar cells, etc. (NEDO)

  8. Fiscal 1997 report on the results of the international research cooperation project for a feasibility survey for finding out seeds of the international joint research. Effective use technology of saturated hydrocarbon (technology against the surplus aromatic hydrocarbon/technology of high grade treatment of petroleum coke); 1997 nendo kokusai kenkyu kyoryoku jigyo (kokusai kyodo kenkyu seeds hakkutsu no tame no FS chosa). Howa tanka suiso no yuko riyo gijutsu / hokozoku tanka suiso no yojo taisaku gijutsu / sekiyu cokes no kodo shori gijutsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For the purpose of the effective international research cooperation, the paper surveyed in fiscal 1997 the effective use technology of saturated hydrocarbon, technology against the surplus aromatic hydrocarbon and technology of high grade treatment of petroleum coke. In the survey of the effective use technology of saturated hydrocarbon, trends of FT synthesis technology and DME synthesis technology were studied as trends of technology to produce synthetic gas, and a project was proposed for technical development of using natural gas as liquid fuel in Japan. In the survey of technology against the surplus aromatic hydrocarbon, studied were the benzene law regulation and the supply/demand trend of aromatic hydrocarbon, process to reduce production of aromatic hydrocarbon as much as possible, process to reduce aromatics of the produced petroleum products, and process to effectively use aromatic hydrocarbon as chemical raw material. In the survey of high grade treatment of petroleum coke, studied were a possibility of using HS petroleum coke in the DIOS method, iron bath gasification, and copper bath gasification technology. 108 refs., 146 figs., 103 tabs.

  9. Introduction of environmental endocrine disrupters; Kankyo horumon ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Nakai, S. [Japan Society for the Promotion of Science, Tokyo (Japan); Hosomi, M. [Tokyo Univ. of Agriculture and Technology, Tokyo (Japan). Faculty of Technology

    1998-11-05

    This paper describes environmental hormones. Hormones are directly secreted from endocrine gland into blood flow, and play an important role of the differentiation of textures of organisms, reproductive function, metabolism, and adjustment of nervous/immunity system. There are some substances with hormone and anti-hormone reactions within the body of organisms, which are discharged as chemical substances in the natural environment by the artificial production activities. These are extrinsic endocrine disrupters, i.e., environmental hormones. There are 67 kinds of doubtful substances. When the environmental hormones work on the certain reaction stage of hormones, the normal action of hormones is disturbed. Various anomalies of wild animals have been reported in the world, which are suggested to be caused by the environmental hormones. Effects are known on the health of Homo sapiens, such as malignant tumor. In the current stage, test methods are under development, by which the presence of endocrine disruption can be screened. The effects depend on the growing stages of organisms, and it is necessary to consider the effects on various generations. 20 refs., 2 figs., 4 tabs.

  10. Geothermal energy and global environment. Chinetsu energy to chikyu kankyo

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-25

    The geothermal energy is explained together with the global environment. The global environment problem comprises ozonospheric destruction, acid rain and global warming. The important elements of measures against the global warming are rise in prediction accuracy (rise in accuracy of prediction model for which the reflection on the cloud, rainfall and evaporation, percentage of the ocean, and biosystem are taken into consideration) and technological development for the measures (high efficiency utilization of energy, reduction in CO2 production, CO2 removal, storage and recycling technology). A prediction example of the worldwide energy in 2050 indicates that the nuclear power, fossil fuel and geothermal energy occupy 50, 20 and 8%, respectively. Though poor in economical performance, the geothermal power generation will be competitive, if assumption is made of a future rise in fossil fuel cost. It is more practical than the photovoltaic power generation and wind power generation. Its CO2 emission per kWH is smaller than that of the hydraulic power generation and nuclear power generation. In the geothermal power generation, H2S largely influences the atmospheric environment. As measures against the H2S, stretford and other different processes are put in practical use. For the water quality environment, what is important is measures against the As. 24 refs., 25 figs., 2 tabs.

  11. Paint indusry and environmental problem. Toryo kogyo to kankyo mondai

    Energy Technology Data Exchange (ETDEWEB)

    Osawa, A. (Nippon Oil and Fats Co., Tokyo (Japan))

    1991-10-11

    Relating to the paint industry, introduction was made of environmental problem, particularly trend of the hydrocarbonexhaust regulation, and problem against the global warming gas and acid rain. Environmental pollution matter produced by the paint industry and painting industry being mainly hybrocarbon (organic solvent), the worldwide quantity of hydrocabon exhausted in the atmosphere is estimated to be annually 20 million tons, of which 18%, i.e., an annual quantity of 3.5 million tons is exhausted from the field of paint industry. The role to be played by the paint industry is important for the lowering in pollution by the hydrocarbon. Useful paints for the environmental maintenance comprise high solid paint, aqueous paint, slurry paint, powder paint and UV-hardened paint. The automobile coating is being also changed from the metallic coating to the aqueous coating. Low temperature hardening paint is used for the countermeasures against the global warming gas. For those against the acid rain, urethane hardening, hardening by the acid-epoxy group reaction, hardening by the alkoxyl froup reaction and other hardenings are developed to replace the conventional hardening by the melamine resin for heightening in acidproofness of paint film. 5 ref., 1 fig., 3 tabs.

  12. Environmental technology. Toshiba's approach to environmental protection. Kankyo gijutsu. Toshiba group no kankyo hozen eno torikumi

    Energy Technology Data Exchange (ETDEWEB)

    Shimoi, Y. (Toshiba Corp., Tokyo (Japan))

    1994-05-01

    The present report introduces the vicissitude of Toshiba Group's grappling with the preservation of global environment since its start in 1988. Positioned at the top of Toshiba's entire organization, the Global Environmental Committee deals with all matters concerning the administration, engineering, production and sales, and take actions for the preservation to concretize the 'Freonless, Recycling, Energy-saving and Earth-protection'. Its sub-organization comprises the Environmental Technology Promotion Committee, Environmental Protection Management Committee and Product Recycling Legal Committee. Cycling through 'Plan-Do-See' is being executed. Given to the motto for the environment preserving action, the particular symbol mark of 'Free+2A' is having 2A executed. The 2A stands for the 'Action Plan' and 'Auditing'. The execution result is duly reported to the administration conference which is Toshiba's highest decision-making organ. Together with the environment managing action, connection must be built up between the system of social economy and vicissitude of technological development. Toward the political and industrial fields in Japan and abroad, the 'Voluntary Plan' has been stepping ahead since 1993 for the environmental preservation. 5 figs.

  13. Arkitektur

    DEFF Research Database (Denmark)

    Kural, René

    2006-01-01

    Hanamadori Bunka Center , "Kulturcentret for blomster og grønt". Designet af Toyo Ito i samarbejde med bla. Kuwahara, Kanebako, Kankyo Engineering og Atelier Bow-Wow.......Hanamadori Bunka Center , "Kulturcentret for blomster og grønt". Designet af Toyo Ito i samarbejde med bla. Kuwahara, Kanebako, Kankyo Engineering og Atelier Bow-Wow....

  14. Research study of conjugate materials; Conjugate material no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper reported an introductory research on possibilities of new glass `conjugate materials.` The report took up the structure and synthetic process of conjugate materials to be researched/developed, classified them according to structural elements on molecular, nanometer and cluster levels, and introduced the structures and functions. Further, as glasses with new functions to be proposed, the paper introduced transparent and high-strength glass used for houses and vehicles, light modulation glass which realizes energy saving and optical data processing, and environmentally functional glass which realizes environmental cleaning or high performance biosensor. An initial survey was also conducted on rights of intellectual property to be taken notice of in Japan and abroad in the present situation. Reports were summed up and introduced of Osaka National Research Institute, Electrotechnical Laboratory, and National Industrial Research Institute of Nagoya which are all carrying out leading studies of conjugate materials. 235 refs., 135 figs., 6 tabs.

  15. Material design related investigation. Investigation on the bionic design; Zairyo sekkei kankei chosa. Bionic design ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    The biomolecular characteristics were analyzed to establish the basic technology for the utilization of artificial joint, liver and muscle. The rise in functional grade of biomolecules themselves, and inter-biomolecular recognition and bonding rationally and teleologically generates living body`s functions to form the structure and drive the molecules. Energywise extremely advantageous, those functions serve to creatively produce the artificial internal organs and elucidate the function of biotissue, if the tissue and function of living body can be artificially restructured by utilizing the biomolecular mechanism to make the tissue self-proper. It is the concept of bionic desing research. Methodologically, the inter-bimolecular action is to be synthetically analyzed through bio/physicochemistry-based computer simulation. The artificial materials excelling in adaptability to the living body are to be developed by analyzing the mechanism for the biotissue. The molecules-driving function is also to be analyzed which is generated dy the high-grade bonding of muscular and other high biomolecules. 280 refs., 69 figs., 9 tabs.

  16. Research and development cooperation project on environmental measurement using laser radar in fiscal 1995 (environmental network); Kankyo keisokuyo laser radar no kaihatsu ni kansuru kenkyu kyoryoku (kankyo network)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    As a part of the cooperative work with Indonesia of R and D of a laser radar for environmental measurement, the paper described the development of an environmental network. The field survey was conducted in April, July and December 1995 and in March 1996. For the investigational research, five meetings of the committee and four times of group work were held. The Asian environmental network was studied in terms of its arrangement, operation and management, and the overall network/path control design were being prepared. To make the persons concerned abroad and in Japan understood the APEC Osaka Conference held in November 1995, a homepage APEC `95 Kansai was opened using WWW (World Wide Web, a decentralized hyper media system which can dispatch information to the whole world by network using hyper text). Moreover, in connection with this, a homepage was opened of CICC (Center of the International Cooperation for Computerization, a center controlling the whole Asian environmental information network system where E-mail and data are exchangeable with Indonesia via Tokyo NOC (Network Operation Center)). 49 figs., 8 tabs.

  17. Research cooperation in the development of laser radar for environmental measurements. Environmental network; Kankyo keisokuyo laser radar no kaihatsu ni kansuru kenkyu kyoryoku. Kankyo network

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Among the research cooperation in the development of laser radar for environmental measurements with Indonesia between FY 1993 and FY 1996, results of the research and development of the environmental network are summarized. For the environmental information network, the Tokyo NOC is linked as an Internet connection point in Japan with the Jakarta NOC using an international dedicated line with a capacity of 64 Kbps. The Tokyo NOC is linked with domestic environmental information researchers using Internet. Thus, data stored in the data processing system of laser radar can be exchanged, information in both countries can be exchanged using E-mail, and data can be accumulated. For the research cooperation with Indonesia, research of path control and information relay server, research of effective transmission of data on the network, and research of multimedia communication have been conducted. The multimedia communication, distributed processing, and extension of dedicated line network using PPTP have been also conducted. 39 figs., 4 tabs.

  18. Overview of EPA`s proposal revision of the particulate matter standard; Beikoku kankyo hogocho ga teianshita ryushijo busshitsu kankyo kijun ni kansuru kaiteian no gaiyo

    Energy Technology Data Exchange (ETDEWEB)

    Maejima, K. [Japan Automobile Research Institute Inc., Tsukuba (Japan)

    1997-11-01

    U.S. Environmental Protection Agency in 1997 announced the new environmental standards covering the particulate matter (PM) smaller than 2.5{mu}m or less in diameter. As a document that explains how the standards came to be released, the original of the essay (made public in 1997) of R.O. McClellan and F.T. Miller is introduced. The themes discussed in the essay include: U.S. Clean Air Act and National Ambient Air Quality Standards; concept of PM; PM in the air (airborne PM): PM 10{mu}m or less in diameter and PM 2.5{mu}m or less in diameter; respiratory tract as PM`s target organ (respiratory system from nose and mouth to the remotest pulmonary alveolus); vital reaction (response of organism to PM); PM-related environmental standards, past and present; recent reviews concerning PM (various subjects that are attributed to exposure to PM, including: untimely death, changing for the worse of diseases relating to the respiratory system and cardio-vascular system, changes in pulmonary function, increase in the number of symptoms relating to the respiratory system, changes in pulmonary tissues and structures, changes in the defense mechanism of the respiratory system, etc.). 70 refs., 14 figs., 5 tabs.

  19. Research and development cooperation project on environmental measurement using laser radar (environmental network) in fiscal 1993; Kankyo keisokuyo laser radar no kaihatsu ni kansuru kenkyu kyoryoku (kankyo network)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    For the purpose of contributing to the research cooperation project on the development of a laser radar for environmental measurement, the paper surveyed the present and future trend of the environment related information network in Indonesia. The survey was conducted in terms of a name of the network, the main administration body, the number of users, the utilization status, the use protocol, details of service, domestic mode installation sites and the main administration body, accounting system, types of the network used, reliability and stability of network, limitations on the use and details of the limitation, etc. The plan for expanding telecommunication equipment is being advanced in a very quick tempo. However, there are many problems in digitalization, and it is feared that the plan will be delayed. As to telecommunication quality and connection quality, the telecommunication completion rate, SCR, is very low, approximately 24% on average, which is equal to that around 1990 in Japan. The business service for users is all bureaucratic since they have a lot of applications for the installation piling up with no exception to the rule of developing countries. 23 figs., 10 tabs.

  20. Environmental controller of soil (mulch). Dojo kankyo chosetsu shizai-maruchi

    Energy Technology Data Exchange (ETDEWEB)

    Ishimoto, S. (Mikado Chemical M.F.G. Co., Chiba (Japan))

    1993-08-10

    Mulch for environmental controller of soil is divided into two types that are the best use of mulch using natural material and chemical material mulch. Stone mulch is the natural mulch and has been used in China for the cultivation of melon since about 500 years before. Plastic film mulch is used as chemical material mulch and is divided according to its purpose of use into light reflection film, light transparency suppression film, light transparent film, anti vaporization film, rain water permeation film, shock-proof film and so forth. As the weed growth was severe in case of transparent film mulch, the weed problem was solved by the development of black film or the film with weeding function prepared by mixing of polyethylene resin and weed killer. Besides, the development situation of green film mixing weed killer, light reflection type film mulch in tunnel cultivation, mulch to avoid virus diseases and non-woven cloth mulch are cited. 5 figs.

  1. Space environment utilization and chemical engineering; Uchu kankyo riyo to kagaku kogaku

    Energy Technology Data Exchange (ETDEWEB)

    Imaishi, N.; Shiraishi, F. [Kyushu Univ., Fukuoka (Japan)] Suzuki, M. [Tohoku Univ., Sendai (Japan)

    1997-10-05

    Construction of a giant international space station on an orbit of 460 km distant from the earth will be begun since 1998, JEM (Japanese Experimental Module) will also be launched on 2001, and various experiments using the space environment under a condition of staying 2 to 4 members in the JEM will be planned after the end of that year. Characteristics of the space environment are microgravity, super high vacuum at surrounding apace, superior vision and so forth. In order to utilize the space environment different from the earth environment, it is necessary to consider extremely many things. The chemical engineers who have conducted a lot of complex systems on the earth hitherto shares some large roles in the fields of planning and executing scientific and engineering researches conducted in JEM, utilization of lunar surface and space for materials and energy production base in future, and so forth. In this paper, the Closed Ecological Life Support system (CELSS) essential to specific phenomena and long-term manned space flight under microgravity environment were introduced. 29 refs., 7 figs.

  2. Study of glass processing under microgravity; Bisho juryoku kankyo wo riyoshita glass no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Makihara, M. [Osaka National Research Institute, Osaka (Japan)

    1998-03-20

    In a study field on glass processing under microgravity environment (ME), R and D of practical advanced glasses used in a top technology field are in promotion together with basic studies on transfer phenomenon of glass melt and others. This paper presents an example of study themes on application of the remarkable effect of ME on glass to development of new materials. Glass melt with a certain composition shows extremely small surface tension and contact angle for a specific substrate. This combination shows a superfluidity under ME, and allows uniform glass coating on the surface of complicated-shape materials. Non-contact surface treatment is possible under ME by the effect of sound pressure and electrostatic force. Preparation of singular photo-functional glass is also possible by melting more than two kinds of glasses different in physical property under ME, and transferring glass melts by Marangoni convection to 3- dimensionally distribute the function into glass. Development of high-melting point glass and glass ceramic fine particles is also expected. 36 refs., 5 figs.

  3. Appropriate technology in environmental sanitation; Kaihatsu tojokoku ni okeru kankyo eisei bunya no tekisei gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Kitawaki, H. [Toyo Univ., Gunma (Japan)

    1997-10-05

    For solving the problems of environmental sanitation in developing countries, assistance projects in respect of the supply of safe water and the maintenance of urine/waste water treating facility are developed by the aid organizations and civilian organizations of Japan. However, the funds, technology, capable persons, materials, etc. in developing countries are restricted in various ways, so there are a lot of cases that can not be approached by the methods in developed countries. In this paper, the appropriate technology in the environmental sanitation field in developing countries is described with practical cases. For example, there is a case that, regarding the wastewater treatment, a stabilizing pool is a safer treatment than the activated sludge process. Since the retention time in the stabilizing pool is longer than 10 days, parasitic worms in feces is settled and germs die out considerably. On the other hand, although the activated sludge process has a good removal rate of BOD, it is not an appropriate technology in developing countries because the removal rate of parasitic worms and germs are not good thus a disinfection is necessary, and additionally the electric power is rather consumed in operation. 2 refs., 4 figs., 1 tab.

  4. Research result information for agriculture and environment. No.12; Nogyo kankyo kenkyu seika joho. 12

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-08-26

    Essential purposes of productivity improvement, which human being have desires in agriculture for a long time, can not be discussed without considering relations with the environment, nowadays. In these situations, significant investigations have been created among the researches in the agriculture and environment field in response to the requirements of the time. In this report, results of 41 main researches submitted to the agriculture and environment research promotion conference in FY 1995 are compiled. This field covers the environment and resource characterization, the agrioecology, and the environment assessment and control. The environment and resource characterization field includes studies on the micro-meteorological mechanism of desert expansion due to excess pasturage, the salt removal function of clays, and the protection of ground water quality by grassland. The agrioecology field includes studies on the antimicrobial substance contained in Glycyrrhiza glabra against the soil decease of potatoes caused by Streptomyces scabies and the new plant growth obstruction substance contained in Sphenoclea zeylanica. The environment assessment and control field includes studies on the producing district change prediction of main grains accompanied with global environmental change and the carbon balance in the ecosystem of farm lands and rice fields. This report includes a lot of noticeable papers. 103 figs., 24 tabs.

  5. Environmental action program of the electric utilities industry; Denki jigyo ni okeru kankyo kodo keikaku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-30

    The electric utilities industry has established the environmental action program on the premise of stably supply of power. The measures for reduction of CO2 emissions include promotion of best power source mixes, centered by nuclear power generation which emits essentially no CO2; improvement of energy utilization efficiency by enhancing thermal efficiency at thermal power stations by adopting combined cycles and other advanced systems, and by reducing power transmission/delivery losses; introduction and diffusion of new energy sources, such as solar ray and wind power plants; development and diffusion of energy-saving systems, such as heat-storing heat pumps; and promotion of technical development for recovery, treatment and fixation of CO2. The measures for expanded utilization of coal ashes include expanded utilization of ashes as the starting material for cement and concrete; establishment of the specifications and standards of fly ashes, including revision of the current JIS specifications; and promotion of researches on and technical development of civil engineering and building areas in which ashes can be utilized. The program also stresses importance on voluntary and positive development of environment management and monitoring systems. 5 figs.

  6. Restoration of dragonfly habitat; Tonbo no seisoku kankyo to sono saisei

    Energy Technology Data Exchange (ETDEWEB)

    Yobu, S. [Kagoshima University, Kagoshima (Japan). Faculty of Agriculture

    1994-08-10

    Activities to build environments where familiar living creatures live have become active among citizen`s communities and local governments. This paper describes the ways to restore waterside ecological environment using dragonfly as a parameter, and examples of the restoration in urban areas, suburban areas and mountain valleys. The importance that comes first is to establish the future image, for which ecological design must be worked on based on surveys of diverse vegetation blocks. Vegetation transition rate is very high in Japan, where grasslands of low height change to high grasslands in two or three years causing change in living creatures that live therein. This condition requires such controls as mowing, felling, and mud dredging. Building an environment where dragonflies can live needs the water quality to have BOD at 10 mg per liter or lower. The egg-laying methods of dragonflies are divided into the water surface striking and egg-laying in plant tissues. It is necessary to prepare environments that suit species, such as stalks of Zizania protruding at watersides that facilitate dragonflies to emerge, grasslands where they find the places easy to live, and adequate degrees of sunlight irradiation. Very small modification of an environment often results in a great effect. 8 figs., 1 tab.

  7. Parameters to evaluate hot heat environments; Onnetsu kankyo no hyoka shihyo

    Energy Technology Data Exchange (ETDEWEB)

    Horikoshi, T. [Nagoya Institute of Technology, Nagoya (Japan)

    1996-01-05

    This paper introduces a predicted mean vote (PMV) and a new effective temperature as parameters to evaluate hot heat environments. A human heat balance equation represents equilibrium between heat production in human bodies and heat dissipation to the outer environment. The state for a human body to be comfortable as expressed by a comfortableness equation is a case where skin temperature and heat dissipation by evaporation due to perspiration are in a linear relationship with metabolic amount. The PMV expands this comfortableness equation outside the comfortable conditions in an attempt of linking it with the sense of the human body against hotness and coldness. However, its scope of use is limited because of inclusion of the relationship between the amount of dissipation of the comfort region due to evaporation and the skin temperature. The new effective temperature is introduced from the operative temperature which handles only sensible heat or the humid operative temperature (HOT) added with the effect of humidity. The new effective temperature expresses the humidity as relative humidity of 50%. In addition, what has made expression of effect on wind velocity possible was the standard humid operative temperature that considers heat resistance in clothing. The skin temperature required in the new effective temperature and the measurement on wetted area ratio were made no longer necessary by the two node model. 23 refs., 7 figs.

  8. International Symposium for the Promotion of APEC Environmental Technology Exchange; APEC kankyo gijutsu koryu sokushin symposium

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-11

    The International Symposium for the Promotion of APEC Environmental Technology Exchange was held under the theme `The function and role expected of the APEC Virtual Center,` with the objectives of clarifying the need for future intra-regional environmental technological exchange, defining the types of information and personnel exchange, and promoting the use of interactive character of the APEC Virtual Center for Environmental Technology Exchange by encouraging access to and participation in the Virtual Center project. It was held in the period of 11th and 12th, November in 1996, at the venue of Rinku International Convention Center in Osaka. The symposium was attended by 477 persons from nine countries, i.e., Australia, Canada, China, Indonesia, Korea, Philippines, Thailand, the US, and Japan, comprising staff members of intra-regional environment-related organizations. After the keynote speech, `Current status and tasks of environmental technology exchange`, and `Expected roles of the Virtual Center for Environmental Technology Exchange` were discussed. During the plenary session, the chairman summarized the symposium. This summary was carried on the Virtual Center homepage of the Internet

  9. Development and environment of new electric automobile, `Ecovehicle`; Shingata denki jidosha eko vehicle kaihatsu to kankyo

    Energy Technology Data Exchange (ETDEWEB)

    Shimizu, H. [National Inst. for Environmental Studies, Tsukuba (Japan)

    1996-10-27

    This paper introduces history of the development of an electric automobile, `Ecovehicle`. It is provided with a high overall energy efficiency compared with an engine vehicle. The Ecovihicle is 1.2m in width, 3.3m in length, 2 seating capacities and 910kg in overall weight with serially connected 56 batteries of each 4V, 40Ah and having the total weight of 269kg. Its travel distance per charging is 130km at a speed of 80 k.p.h. This vehicle is capable of running with an energy of approximately one third as much as that of a light car. In addition, the vehicle is provided with polycrystal solar batteries placed on 0.6m{sup 2} area on the roof and spoiler generating 60W maximum. Assuming the annual duration of sunshine is 1,800 hours, charging is possible for 63kWh annually. Assuming the charging efficiency is 83%, charging is possible about seven times, which is an equivalent of travelling about 1,000km annually. The characteristics for example are the employment of brushless DC motor, use of energy saving switching element IGBT in order to realize a low level of loss in the inverter, in-wheel motor system, and storage of storage batteries in a hollow aluminum frame installed under the floor. 2 refs., 5 figs., 1 tab.

  10. Ozone hole formation and global environment. Ozone hole no keisei to chikyu kankyo

    Energy Technology Data Exchange (ETDEWEB)

    Iwasaka, Y. (Nagoya University, Nagoya (Japan). Solar Terrestrial Environment Laboratory)

    1992-10-01

    This paper summarizes mainly the mechanism of forming ozone holes. Ozone in the stratosphere is destroyed by catalytic reaction of ClOx attributable to presence of chlorine generated from photodissociation of fleon. Presence of NOx leads to formation of inactive ClONO2 which suppresses the reaction. Air in the stratosphere over the antarctic during the polar night period is isolated from air in the surrounding areas and its temperature is low, where cloud comprising nitric acid crystals (NAT) or ice crystals (polar stratospheric cloud) is formed. When ClONO2 comes in contact with these cloud particles, it is decomposed, and Cl2 and HOCl produced from the decomposition are accumulated in the stratosphere, while NO2 produced simultaneously is taken into NAT reducing the NOx concentration in the stratosphere. When the spring comes, these compounds form chlorine, and its Cl catalytic reaction causes an explosive ozone destruction. No extensive ozone destruction is thought to occur in the arctic because polar stratospheric cloud grows only poorly. 14 refs., 6 figs., 1 tab.

  11. Synthesis of new erodable polymers response to environmental stimuli; Atarashii kankyo chowagata bunkaisei plastic no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Kato, M.; Nagasaki, Y. [Science University of Tokyo, Tokyo (Japan). Faculty of Industrial Science and Technology

    1997-02-01

    This report relates to the designing of functional materials that decompose in response to various signals. A derivative of {alpha}-bromomethylstyrene is caused to act on the living anions of {alpha}-methylstyrene for the synthesis of a pyrolytic polymer having unsaturated groups at its terminals. The terminal double combinations of this polymer split under the influence of heat, acid, or base for depolymerization which is quantative, and the decomposition temperature may be controlled by replacing terminal phenylallylic groups with methyl groups or phloro-groups. Furthermore, a novel polythyramine polymer is synthesized with its principal chain constituted of NCH2CH2Si, the principal chain easy to disintegrate when exposed to an electron beam. The polymer is signal-responsive and may be patterned by use of an electron beam. As a temperature-responsive polymer with the hydrolytic feature controlled, poly(thyroxy ethylene glycol) is obtained from a derivative of diaminosiloxane and oligo-oxyethylene. This is a high-mobility, temperature-responsive material whose hydrolysis may be controlled. 3 refs., 2 figs.

  12. Nation-wide geothermal resources exploration project. (3rd phase). ; Regional exploration of geothermal fluid circulation system. Zenkoku chinetsu shigen sogo chosa. 3. ; Koiki nessui ryudokei chosa (zokuho)

    Energy Technology Data Exchange (ETDEWEB)

    Okada, H.; Sasada, M. (New Energy Industrial Technology Development Organization, Tokyo (Japan) Yamada, K. Dowa Engineering Co. Ltd., Okayama (Japan)); Sakai, S. (Mitsui Mineral Development Engineering Co. Ltd., Tokyo (Japan)); Shibuya, A. (Sumiko Consultants Co. Ltd., Tokyo (Japan))

    1992-03-31

    This paper summarizes the result of a regional exploration of geothermal fluid circulation system, carried out in the regions of Akitakoma, Bandai and Aso in relation with the general development of methods to analyze geothermal exploration information targeted in the third nationwide geothermal resources exploration project. These regions are the three regions out of six extracted from all over Japan as the major regions of volcanic geothermal fluid convection type. Estimation is made in each region on predominant locations of heat source, and extraction is given on promising geothermal areas based on evaluations on the reservoir structure, thermal structure, and fluid flow mechanism. Major heat sources in the Akitakoma region exist in the Akitakoma volcano and the Amihari {center dot} Iwate vocanos, and the most promising areas are the upper streams of the Kuzuneta River, Matsukawa River, and Sendatsu River. The heat sources in the Bandai region are in the Azuma volcano, Adatarayama volcano, and Bandai volcano, the most promising areas are the east part of the Mt. Azuma and the Tsuchiyu area. Inference has been made in the Aso region on existence of heat sources in the old and new groups of volcanic cones, and the Yunotani {center dot} Tarudama area has the highest geothermal potential. 7 refs., 6 figs.

  13. Networking of research information on global environment protection technologies; Chikyu kankyo taisaku gijutsu no kenkyu joho network jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Networking is being executed with an objective of exchanging information on global environment technologies at an international level. In order to further promote the information exchange, and to make web sites user-friendly, fiscal 1998 has performed structuring a thesis renewal system. As a result of structuring the thesis renewal system, researchers can use the system as using a word processor by inputting data from a terminal in their laboratories. The data can also be made into a data base nearly semi-automatically. In addition to reducing time loss, delay and input errors because of re-entry, the researchers can make the data into a database on nearly a real time basis, and can provide their own theses to any part of the world through Internet. With regard to retaining Internet security, the security software having been introduced last year was renewed. In addition, detailed status such as daily access has become possible of identification as a result of introducing the net intellect. (NEDO)

  14. Solidification of metals and alloys under microgravity conditions; Bisho juryoku kankyo deno kinzoku oyobi gokin no gyoko

    Energy Technology Data Exchange (ETDEWEB)

    Motegi, T. [Chiba Institute of Technology, Chiba (Japan)

    1998-03-20

    Studies on the difference of solidified textures of metals and alloys under microgravity conditions from conventional ones on the earth, and the possibility of new material creation are very exciting. Features of microgravity environment in melting and solidification of metals are no thermal convection, and mass transfer caused only by diffusion. Even in alloys where the second phase molten component separates by difference in density on the earth, homogeneous textures are obtained because of no floatation and sedimentation. Melting and solidification without vessels allows to produce high-purity materials because of no invasion of impurities from vessels. No static pressure can eliminate distortions of crystals due to dead weight. No defects are observed because of no disturbance of atomic sequences. Referring to various experiments on metals under microgravity conditions, this paper outlines supercooling solidification of metal melts, solidification of single-phase alloys and multi-phase alloys such as eutectic and peritectic system ones, particle-dispersing composite materials, and the behavior of gases in molten metals. 35 refs., 8 figs., 2 tabs.

  15. Project to promote exchange of international information on environmental technologies; Kankyo gijutsu kokusai joho koryu sokushin jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Mutual information exchange at international levels is important for practical application of global environment preservation technologies, whereas the APEC Virtual Center was established in fiscal 1997. Fiscal 1998 has discussed the future functions of the Virtual Center, and carried out the following matters to improve the functions and achieve its stable operation. Discussions were given on common use with the centers of other countries and regions of the specifications of classification systems for information areas and provided information that are provided by the Virtual Center. Visits were made to sub-managing countries and regions for smooth operation of the study groups, and opinions were exchanged. Visits were made to coordinators and contact points established in each country and region when the Center was founded in fiscal 1997. A visit was made to the U.S. Environmental Protection Agency to exchange opinions on coordination measures with the Cleaner Production Strategy of the U.S.A. being a project similar to the subject project. In order to strengthen the Japan's Center, attempts were made to expand the linking information to wider scope. Special pages publishing concentratedly the items of information that the users are interested were prepared as part of the information provision. (NEDO)

  16. Advanced high temperature fluid technology development using microgravity environment; Bisho juryoku kankyo riyo kodo koon ryutai gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Behavior of gas/liquid two-phase flow in tubes and behavior of air bubbles in liquid were investigated under the microgravity environment without convection by using the drop test facilities of the Japan Microgravity Center. To remove bubbles in the liquid under gravity, the strength of surface tension acting on the gas/liquid interface was made inhomogeneous. In this case, the moving velocity of bubbles on the gas/liquid interface was able to be raised up to the maximum of 2.4 mm/s. For the movement of bubbles in the horizontal direction under the condition of low relative velocity independent of the size of air bubbles in the duct, bubbles moving in the horizontal direction under 1g flowed almost linearly accompanying with the liquid flow. For the air bubble distribution in the bubble flow, where small bubbles flow in the vertical tubes, the fluid pattern of air bubble flow under 1g and {mu}g depended greatly on the initial condition of mixed bubbles. Fundamental data were obtained, as for the transportation and control of multicomponent bubbles, bubbles in the sound field, and bubbles in the liquid phase by magnetic force, and the fluid phenomena of bubbles in the subcool boiling region, a single bubble in the gradient electrical field, and bubbles in the tubes with small diameter. 47 refs., 97 figs., 8 tabs.

  17. Research and development of laser radar for environmental measurement. 2; Kankyo keisokuyo laser radar no kenkyu kaihatsu. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    This project was received by Optoelectronic Industry and Technology Development Association from NEDO, and aims to contribute to the improvement of Indonesia's environmental administration through the development of an air pollution observing laser radar (LR) and of an environmental information network system fit for use in the country in cooperation with Indonesian engineers. LRs will be installed at several sites in an urban area where environmental problems are increasingly serious, and a observation network system will be constructed to link the laser radar sites. The observed data will be collected, analyzed, and processed by an observation data processing center for the investigation of the three-dimensional spatial distribution of air pollution to determine the actual state of air pollution over an urban area. The laser radars and the network will be placed in the city of Djakarta. The Indonesian authority responsible for the project is Indonesian Institute of Sciences. In fiscal 1994, part of the equipment (difference absorbing LR) was designed and manufactured, the design of the environmental information network system was developed, and various researches required in this connection were conducted. (NEDO)

  18. New city model with environmental symbiosis and energy conservation; Kankyo kyosei sho energy wo mezashita shintoshi koso

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-01

    New city concept is studied from the viewpoints of city economy, environmental symbiosis, energy and resources, transportation, urban disaster prevention, information dissemination, etc. As the result, twelve cluster cities equipped with capabilities of state capital function and administrative business, commerce, interchange of people and goods, and recreational activities are dispersed and distributed to form a double ring, populated by 0.6 million and occupying 7000ha. In a simulation of the heat island phenomenon, the temperature is lowered by 0.2-0.3degC by the dispersion of city functions, and by 0.1-0.15degC by environmental symbiosis-related measures. Primary energy consumption is reduced by 17% by reduced demand for power and heat and energy saving of 15% is attained by recyclable energy utilization and enhanced-efficiency energy supply, all thanks to passive solar systems and higher-efficiency electric machines, photovoltaic power generation, heat pump-aided utilization of waste heat and environmental heat, electrothermal energy supply from the MCFC (molten carbonate fuel cell), etc. 64 refs., 56 figs., 25 tabs.

  19. Faults survey by 3D reflection seismics; Sanjigen hanshaho jishin tansa ni yoru danso chosa

    Energy Technology Data Exchange (ETDEWEB)

    Tsuchiya, T.; Ejiri, T.; Yamada, N.; Narita, N.; Aso, H.; Takano, H.; Matsumura, M. [Dia Consultants Company, Tokyo (Japan)

    1996-10-01

    This paper describes fault survey by 3D seismic reflection exploration. Survey has been conducted mainly at flat land area without pavement not in urban area in Japan. Subsurface structure is complicated with intersecting multiple faults. In this area, a lot of geological investigations have been done prior to the seismic reflection exploration. Fairly certain images of faults have been obtained. However, there were still unknown structures. Survey was conducted at an area of 170m{times}280m in the CDP range. Measurements were carried out by using 100 g of dynamite per seismic generation point combined with 40 Hz velocity geophones. Fixed distribution consisting of lattice points of 12{times}12 was adopted as an observation method. In and around the lattice, a great number of explosions were carried out. The CDP stacking method and the method of migration after stacking were used for the data processing. The 3D structures of six horizons and five faults could be interpreted. Interpreted horizons were well agreed with the logging results. 3 figs.

  20. Investigation on global warming gas methane; Ondanka gas methane ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    This paper summarizes the current status of research and development on generation of methane gas whose contribution to global warming is said to reach 18% as an atmospheric greenhouse effect gas. Systematization was made in the paper on the status of investigations and researches on different sources of methane gas. Measurement data are insufficient for swamplands, and amounts of methane generated in major swamplands in the world are being measured. Very few researches have been made on termites. Oceans were indicated that closed water areas are the sources of methane generation. Inland waters are in the stage of elucidating the methane generating mechanism. Methane hydrates are estimated being discharged from thawing of frozen soil. No measuring methods have yet been established for volcanic mountains. Discharge coefficient was sought for methane generation energies, and discharge amount in the global level was estimated from statistical data such as amount of production. With regard to agriculture, studies on mechanisms and measure technologies have been advanced on rumination of livestock. Data for paddy fields are being accumulated. Wastes have measurement data accumulated, and discussions are being made on discharge amount estimation and measure technologies. 30 refs., 32 figs., 28 tabs.

  1. Study on the current status of biomass energy development; Bio mass energy no kaihatsu jokyo chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    A survey was conducted on the present status of biomass energy in Japan and abroad and the developmental trend of the latest biomass energy technology. Brazil and the U.S. are most advancing in the biomass energy utilization. Brazil uses sugar cane which is plenty in supply as a raw material, and the U.S. does corn which is the surplus crop. Both countries use the conventional ethanol fermentation technology and produce the petroleum substitution liquid fuel which is in greatest need. As to the technology to convert biomass resource into energy, attention has so far been paid to the development of the production process of the liquid fuel. The latest technology for ethanol fermentation using saccharin and starch as raw materials has already been established in Japan, and the energy-saving type alcohol recovery technology has also reached the stage of practical application. Moreover, as to the ethanol conversion technology with cellulose substrate, the development of the saccharification process will be needed in future. 15 figs., 10 tabs.

  2. Investigation research on autonomous responsive materials; Jiritsu oto zairyo ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    A survey was made on autonomous responsive materials as a new material which reversibly change molecular structures and the aggregation state according to external stimuli. Autonomous responsive materials imitate environmental responsibility in the living organism system and have sensing, control and active functions for external stimuli. The materials are highly efficient and environmentally friendly. In biomimetic materials for soft actuators, drastic changes by temperature of elastic modulus of water-swollen hydrogel are used to the motion. In order to molecularly design stimulus-responsible polymer gel, studied are the relation between the micro structure and stimulus responsibility, dynamic correlation between the micro structure and the macro structure, etc. In the biomedical field, new cure and diagnosis using innovative materials are expected, and the application of autonomous responsive materials to the field is studied. For example, using hydrogel responding the temperature and the surface and controlling by temperature the interaction with components of the organism such as protein and cells, drug delivery in the organism is optimized. Also studied is the application of hydrophilic/hydrophobic changes by temperature to the chromatography. 215 refs., 47 figs., 11 tabs.

  3. Research of trend of energy policy in USA. Beikoku no energy seisaku doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    1989-08-25

    The reserch was conducted to study and analize the trend of energy policy by Busch political power or new congress in USA and the policy as against USSR or East Europe sphere, in particular the trend of approach to USSR in energy field. As far as the realization of energy bill is concerned, Busch political power in the first year seems to be very promising. As President Busch is opposite to gasoline tax, however there is a good possibility of success in the congrss, while in the energy bills the surcharge bill for petroleum is only decided to be rejected. The new political power assume that the endeavor to reformation of USSR is fundamental and systematic one, and they hope that it will bring democratization of life in USSR. Busch political power request the sign of real reformation, and have a intension to promote it. USA hope that USSR government will promote Perestroika into mental reformation, and hope to find it out not in their speech but in their activities in USSR or in various places in the world.

  4. Research on the proficient machine system. Theoretical part; Jukutatsu machine system no chosa kenkyu. Rironhen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The basic theory of the proficient machine system to be developed was studied. Important proficient techniques in manufacturing industries are becoming extinct because of insufficient succession to next generation. The proficient machine system was proposed to cope with such situation. This machine system includes the mechanism for progress and evolution of techniques and sensibilities to be adaptable to environmental changes by learning and recognizing various motions such as work and process. Consequently, the basic research fields are composed of thought, learning, perception and action. This machine requires not only deigned fixed functions but also introduction of the same proficient concept as human being to be adaptable to changes in situation, purpose, time and machine`s complexity. This report explains in detail the basic concept, system principle, approaching procedure and practical elemental technologies of the proficient machine system, and also describes the future prospect. 133 refs., 110 figs., 7 tabs.

  5. Investigations on forests from viewpoints of global environment; Shinrin no chikyu kankyoteki shiten kara no chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Forests have become drawing attention as an absorption source of carbon dioxide, a greenhouse effect gas. This paper discusses significance of forests from viewpoints of their roles as diverse ecological systems and socio-economic values. Forest is a place for living and resting of all kinds of living organisms including plants, animals and microorganisms. Living forms in forests being affluent in kinds and large in amount bring great favor to human societies. Forests play diversified roles other than biological roles in addition to largely affecting heat distribution on the ground through evapotranspiration. These roles include suppression of erosion on ground surface, alleviation of micro climate by reducing wind velocity on the ground, and disaster prevention. Forests have an aspect of supply source of production resources for societies as well as an aspect of unused lands. Efficiency of converting solar energy by plants looks inferior to that of solar cells. Biomass may be regarded as regenerative energy limited to a case where excess production is utilized. 142 refs., 56 figs., 44 tabs.

  6. Advanced technology trend survey of micromachines in Europe; Oshu ni okeru micromachine sentan gijutsu doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    In this research survey, the development trend of micromachine technology in Europe was surveyed, development level of micromachine technology of European companies was grasped, and practical application fields of their target were investigated. Technology development level of private companies in Japan`s national projects and practical application fields of Japan`s target were arranged. Trends of micromachine technology development are compared between Japanese companies and European companies. Among micromachine technology development projects in Europe, ``8520 MUST`` is a part of the ESPRIT Project. About 40,000 companies among about 170,000 companies in whole Europe are relating to the MUST Project. The main fields include the manufacturing technology, process control of machines, technology of safety, sensor technology in environmental fields, and automotive technology. The marketing fields of application include the automobile, military technology, home automation, industrial process, medical technology, environmental technology, and games. The results can be compared with the direction of research and development in Japan. 22 figs., 8 tabs.

  7. Survey on the FRP waste recycling system; FRP haikibutsu recycle system ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Using the area around the Ariake Sea in Kyushu as a model case, the FRP (fiber reinforced plastics) waste recycling system which can be established in Japan has been investigated in cooperation with local government bodies and fishery organizations. As a result, some proposals are provided. The recovery of waste boats utilizing existing sales outlets for fishing boats will facilitate efficient transport, efficient removal of vessel fixtures, and information management and user guidance via existing sales routes. This should make it possible to systematically secure and dispose a certain volume of scrapped FRP boats, and thus generate savings in the disposal costs. In the Phase 1, the main focus will be on establishing the recovery system for scrapped FRP boats to promote reuse and prevent improper disposal. In the Phase 2, the economics will be improved by expanding the recovery system to include other FRP waste products. In the Phase 3, the number of recyclable items will be increased, and thus the recycling system will be completed. 3 refs., 11 figs., 7 tabs.

  8. Investigation into the emission of greenhouse effect gases; Onshitsu koka gas no haishutsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper grasped the situation of greenhouse effect gas emissions of advanced countries based on the reports from them. The advanced countries which concluded the U.N. Framework Convention on Climate Change (OECD member countries, the former U.S.S.R., and East European countries) are to be reported to the office concerned with work for the framework the situation of their greenhouse effect gas emissions according to the obligation of the framework. In and after April 1997, they made the second report. The paper summarized changes in emission amount, the future trend, and the policies/measures mainly taken of nine countries which have already presented the second report (the U.S., the U.K., Germany, Holland, Italy, Norway, Sweden, Finland, and New Zealand) and one country (Russia) which has made only the first report. Moreover, the literature was collected and summed up concerning the mechanism and coefficients of the emission of nitrous oxide and methane. The collected literature was classified into all fields/plural number of fields, energy relation, industrial process relation, relation with the use of organic solvent and other products, agricultural relation, relation with changes in land use and forests, and waste relation. 4 figs., 228 tabs.

  9. Petroleum substitution energy measuring analysis survey; Sekiyu daitai energy keiryo bunseki chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For analytical evaluation of effects of environmental protection measures, energy conservation measures, new energy promotion measures, etc., a very-long term energy supply/demand model was developed and used for a simulational study. The model is composed of the models of macro economics, secondary energy prices, new energy introduction, and energy supply/demand. The feature is that the amount of new energy introduction is measuringly analyzed based on the cost and market scale, and integratedly estimated in a frame of energy supply/demand of the whole Japan. As a result of the simulation, energy source as of 2030 is composed of coal (17%), oil (44%) and nuclear power (15%) in the case of the economic growth as viewed optimistically. Contrarily, in the case of it as viewed pesimistically, energy source is composed of coal (11%), oil (40%) and nuclear power (22%). CO2 emission is -12.4% in the case of the new energy promotion than in the standard case. 7 refs., 79 figs., 107 tabs.

  10. Survey of Joint Implementation activities in China; Chugoku ni okeru kyodo jisshi katsudo kanren chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    It is a large task for Japan to positively promote the Joint Implementation activities related to the United Nations Framework Convention on Climate Change. Rapid increase in the emission of greenhouse-effect gases, especially CO2, is predicted in China with remarkable economic growth and population of 1.2 billion. It is essential to promote the Joint Implementation activities in China. In this survey, framework, organization, problems and tasks were investigated to effectively promote the Joint Implementation activities in China. Construction of framework for the real Joint Implementation activities has been proposed. Current problems for promoting the Joint Implementation activities in China are that the distinct guideline for the Joint Implementation is not established in the government, that the receiving system including receiving, planning and arranging sections is not established, and that the burden problems for the costs of project evaluation, data acquisition, monitoring, and verification are not solved. 5 refs., 21 figs., 6 tabs.

  11. Ground water contamination by electrical prospecting; Denki tansaho ni yoru chikasui osen chosa

    Energy Technology Data Exchange (ETDEWEB)

    Irie, S.; Fujii, Y.; Sakaguchi, S.; Ushijima, K. [Kyushu University, Fukuoka (Japan). Faculty of Engineering

    1996-05-01

    A report is made about the result of vertical electric sounding conducted in the MK district, Fukuoka City, where Kyushu University is about to move. As for the method of electrical prospecting, in consideration of the need for probing a depth of 50m at the shallowest, vertical electrical sounding with a Schlumberger array of electrodes was employed. Measurements were made for 57 locations on the planar ground, the interval between electrodes gradually increased from 1 to 200m. In the 2D structure model analysis, a 2D inversion program was utilized in the ABIC minimization method. Also investigated were the relationship of electric prospecting and the geology, geological conditions, water level in the well, water quality, salt water, and pore rate from the previously-conducted investigative boring. As the result, it was estimated that the boundary between the first and second layers detected by electric prospecting reflected the level of underground water and that the boundary between the second and third layers reflected the portion where the N-value sharply increases. 4 refs., 8 figs.

  12. Survey on commercial use of fuel cells; Nenryo denchi ni kansuru jitsuyoka no tame no chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The basic survey was carried out for the future approach to R & D of fuel cells. Phosphoric acid fuel cell (PAFC) is in the stage of demonstration research and field test supported by subsidy after the end of Sunshine project. Its reliability and durability problems are being solved, and its cost reduction is only one problem for practical use. Distributed systems or on-site systems will be used utilizing its excellent environmental characteristics. Molten carbonate fuel cell (MCFC), solid oxide one (SOFC) and polymer electrolyte one (PEFC) under development were thus surveyed. The following are surveyed: (1) Contribution to a human society such as improvement of energy demand/supply structure and environmental protection, (2) Technological items such as outlook for R & D, validity of developmental issues, comparison between various R & D and significance in industrial promotion, (3) Economic items such as profitability and feasible period, and (4) Social items such as sociability, compatibility to needs, possibility of locations, international meaning, market scale and promotion scenario. 90 refs., 67 figs., 96 tabs.

  13. Investigational research on welfare equipment needs/seeds adaptation; Fukushi kiki needs seeds tekigo chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    At the advent of the aging society, investigated are images of welfare equipment to be developed. In the range where the use of welfare equipment is to be studied, the following are included: self care, excretion, transfer, and support of work other than care, as assistance to daily life; exercise function, communication function, and environment arrangement, as assistance to social participation. Of the images of the welfare equipment classified by the overall evaluation, the following are cited as what supports daily life: a lift usable even in the existing houses, a bump remover by which bumps in the house are removed without making large repairs, a urine collector for females, a training device to prevent urinary incontinence, reduction in the bed-fast elderly, a device to prevent bedsore, a system for safely watching demented old people, a system in which clothes are automatically washed, dried, and hanged on a hanger, etc. What supports social participation are a system for sports experience by virtual reality, sound user interface, etc. For the aged to be healthy physically and mentally, it is essential to be taken good care of and create things to live for by participating the society. For this, it is necessary that the government establish the public policies and that a people be conscious of welfare. 9 figs., 33 tabs.

  14. Econometric analysis on oil-substituting energy; Sekiyu daigae energy keiryo bunseki chosa

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    This is a fiscal 1991 report on the investigation having been carried out for the past 6 years by the Institute of energy Economics contracting with NEDO. The report is to make an overall evaluation of various aspects seen in the development of petroleum substitution energy in relation with the environmental problem. Various kinds of simulations are conducted by developing the industrial related model which can analyse effects of CO{sub 2} emmission control measures exerted on Japan{prime}s microeconomics such as the industrial structure, based on the analytical model which was developed by the fiscal 1990. For example, in establishment of 4 cases such as a standard case, a carbon tax imposition case, an industrial structure arrangement case and a high efficiency-new energy promotion case, signs are seen like that the primary energy supply in 2010 will decrease with heightening of energy price and improvement of consumption efficiency from 740 million kl in crude oil in the standard case to 620 million kl in the high efficiency-new energy promotion case, and CO{sub 2} emission will decrease from 440 million tons to 350 million tons. 14 refs., 65 figs., 114 tabs.

  15. Econometric analysis on oil-substituting energy. Sekiyu daigae energy keiryo bunseki chosa

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    This is a fiscal 1991 report on the investigation having been carried out for the past 6 years by the Institute of energy Economics contracting with NEDO. The report is to make an overall evaluation of various aspects seen in the development of petroleum substitution energy in relation with the environmental problem. Various kinds of simulations are conducted by developing the industrial related model which can analyse effects of CO{sub 2} emmission control measures exerted on Japan{prime}s microeconomics such as the industrial structure, based on the analytical model which was developed by the fiscal 1990. For example, in establishment of 4 cases such as a standard case, a carbon tax imposition case, an industrial structure arrangement case and a high efficiency-new energy promotion case, signs are seen like that the primary energy supply in 2010 will decrease with heightening of energy price and improvement of consumption efficiency from 740 million kl in crude oil in the standard case to 620 million kl in the high efficiency-new energy promotion case, and CO{sub 2} emission will decrease from 440 million tons to 350 million tons. 14 refs., 65 figs., 114 tabs.

  16. Survey and research on precision polymerization polymeric materials; Seimitsu jugo kobunshi zairyo ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Survey and research on the precision control of primary structure of polymeric materials and the precision evaluation technology have been conducted to develop advanced polymeric materials. It is proposed that the three basic processes of polymer synthesis, i.e., addition, condensation, and biomimesis, in forming the precision polymerization skeleton are to be covered through a centralized joint research effort with participation of industry, academia, and the government institute and under the leadership of researchers from academic institutions as the team leaders. For the study of technology trends, international conferences held in UK, Germany, and Hawaii are introduced, and domestic meetings, i.e., Annual Polymer Congress and Polymer Conference, are summarized. In addition, Precision Polymerization Forum and International Workshop on Precision Polymerization were held. The basic studies include a quantum-chemical elucidation of the elementary process in polymerization reaction, time-resolved analysis of polymerization process and polymer properties, synthesis of polymers with controlled microstructures by coordination polymerization using metal complexes, synthesis of polymer with controlled microstructures by precision polycondensation, molecular recognition in catalyst-reaction site, and synthesis of imprinting polymers. 246 refs., 117 figs., 14 tabs.

  17. Microbially influenced corrosion of stainless steels; Stainless ko no biseibutsu fushoku ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Kimura, Y.; Misawa, M. [Kansai Electric Power Co. Inc., Osaka (Japan)

    1998-11-30

    It is generally known, though not fully clarified, that stainless steel pipes, particularly those exposed to natural sea water; are susceptible to microbially influenced corrosion (MIC) at welded joints. In an effort to gain a better understanding of the mechanism, factors affecting the MIC behavior in welded stainless steel pipe joints were experimentally investigated. Results of the study indicate there are two major contributing factors to MIC development in the weld region. One is the circumferentially protruding shape effect of the deposited metal, provinding an environment that allows aquatic microorganisms to adhere to the downstream side of the welded bead surface. The other factor is the declining corrosion resistance in the welded joint due to the oxide film formation caused by insufficient shielding during welding. There factors, if combined, produce higher susceptibility to MIC in the weld than in the base metal. (author)

  18. Design and construction of the `Kairei` deep sea research vessel; Shinkai chosa kenkyusen `Kairei` no kenzo

    Energy Technology Data Exchange (ETDEWEB)

    Inokuma, M.; Kaku, I.; Iimori, T.; Yamashita, T.; Yamase, Y.; Iimoto, K.; Minami, K. [Kawasaki Heavy Industries, Ltd., Kobe (Japan)

    1997-10-20

    Japan`s first full-scale deep sea research vessel Kairei is introduced. Sonic equipment installed on this vessel includes a sonic navigation system, multi-narrow-beam echo sounder, multi-channel reflection profile system, etc. Sonic signals for positioning that the Kairei receives include those from responders aboard the remotely-controlled vehicle Kaiko and transponders set on the sea bottom. Noise reduction measures are taken against propeller noise radiated into the water and solid-borne noises produced by the propulsion engine and auxiliary machinery, this for neutralizing obstruction to the execution of the above-said measurements. The preliminary investigatory function as a submarine navigational aid conducts on-site investigations for the establishment of navigation routes and submarine navigation plans that serve the purpose. The submarine navigation aiding function is constituted of radio/sonic navigation units, multi-narrow-beam echo sounder, inboard LAN, etc. The launch/retrieval system retrieves the approximately 100kN Kairei in an ordinary retrieval operation when the 1/3 significant wave height is 2.5m or less and in an emergency retrieval operation when the same is 4m or lower. 6 refs., 9 figs., 2 tabs.

  19. Research study on harmonized molecular materials (HMM); Bunshi kyocho zairyo ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    As functional material to satisfy various needs for environmental harmonization and efficient conversion for information-oriented and aging societies, HMM were surveyed. Living bodies effectively carry out transmission/processing of information, and transport/conversion of substances, and these functions are based on harmonization between organic molecules, and between those and metal or inorganic ones. HMM is a key substance to artificially realize these bio-related functions. Its R & D aims at (1) Making a breakthrough in production process based on innovation of material separation/conversion technology, (2) Contribution to an information-oriented society by high-efficiency devices, and (3) Growth of a functional bio-material industry. HMM is classified into three categories: (1) Assembly materials such as organic ultra-thin films (LB film, self-organizing film), and organic/inorganic hybrid materials for optoelectronics, sensors and devices, (2) Mesophase materials such as functional separation membrane and photo-conductive material, and (3) Microporous materials such as synthetic catalyst using guest/host materials. 571 refs., 88 figs., 21 tabs.

  20. Investigational research on eco-smart engines; Eco-smart engine no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper investigated the trend of research on eco-smart engines into which optimization function of engine performance, high environmental-adaptability, etc. are integrated. The investigation was made in Japan and abroad on technologies of combustion, structure/material, control, design/analysis, systematization, etc. In case of Japan, specifications were established for three types of engines, subsonic, supersonic and hypersonic aircraft, and the research subjects to fulfil the specifications were extracted. In case of the U.S. and Europe, the survey was made of combustion, materials, noise, design concept, control, etc. Important subjects are selected in priority order. Namely, for the enhancement of efficiency, the following were taken up: three-dimensional fiber-reinforced large-size light-weight structure application technology, heat-resistant advanced-material structure damage-tolerant design technology, pseudo-vesicular structure transpiration cooling technology, etc. For the reduction of NOx emission, the paper took up technologies of environmentally optimization combustion, AI combustion control, and non-cooling combustor liner application. For the noise reduction, technologies of new inclination hole orientation noise absorbing structure material application, super noise control, and innovative CFD utilization low noise aerodynamics. Moreover, the results of fiscal 1997 were outlined to indicate the research in the next fiscal year. 14 figs., 10 tabs.

  1. Preliminary survey of `Green Recycling System`; Jigyo jizen chosa `green recycle system`

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This report describes the construction of `Green Recycling System` which aims to change deserts to lush lands and to stabilize food supply. A cross-linked polymer produced by irradiating the gooey threads of natto (fermented soybeans) with gamma rays can absorb and hold up to 5,000 times its own weight of water. This biodegradable polymer may be used to develop seed gels and pellets to grow soybean, rice and wheat to improve the productivity of deserts and to protect threatened lands from desertification. This technology will be of great value in establishing stable supply of food resources, especially for the Middle East where deserts are expanding as well as for Africa where serious food shortage is already in place. To undertake the Green Recycling System Project, it is indispensable to develop technologies for producing PGA polymer in large quantity, mass production process of bridged PGA through radiation, chemical cross-linkers, new technologies for growing plants using water retainers, water-retaining materials for arid areas, general systems for growing plants in arid areas, and environmentally benign industrial infrastructures. 76 refs., 59 figs., 29 tabs.

  2. Investigation on food sanitation controlling technologies; Shokuhin eisei kanri gijutsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    Doi, Y. [Hokkaido Electric Power Co. Inc., Sapporo (Japan); Nishioka, J.

    2000-03-24

    Investigation has been made on the current status of food sanitation controlling technologies. Eighty percent of food poisoning is caused by bacte such as Salmonera, enteritis vibrio, staphylococcus, and pathogenic colibacillus. Putrefaction as the cause for food poisoning occurs from proliferation of different microorganisms. Heating sterilization is the main method being performed, but non-heating method may include sterilization by flash and high voltage pulse discharge in addition to ultra-high pressure and ultraviolet ray sterilization. As a result of the questionnaire survey, what is extracted as the problems in the food sanitation controlling technologies is to establish a rinsing and sterilizing method with large sterilization effect, an effective sterilizing method and thawing of processed marine products, and a cooling method in food processing. Increasingly demanded for the future is to develop a foodstuff sanitation control system using as the core the hazard analysis critical control point (HACCP, a quality control program developed by the U.S. NASA to ensure safety in manufacturing space food), and micro-organism control and sterilizing technologies to support the above system. The flash pulse and high-voltage pulse sterilizing technologies as the non-heating sterilizing technology are more effective than the conventional heating sterilization methods also from the aspect of quality retention after sterilization. More active development thereof is desired. (NEDO)

  3. Information survey on new energy technology development. Shin enerugi gijutsu kaihatsu joho chosa

    Energy Technology Data Exchange (ETDEWEB)

    1987-03-01

    In developing new energy technology, it is necessary to make up a long term plan on the basis of deep considerations on both the trend of the energy demand and the needs of the social economy. This survey collected, on the macroscopic basis, the informations on the governmental policy on energy development, trend of move of government institutions and enterprises on the technical development, and documents as a result of conference and academic meetings. As an example, the USA section consists of descriptions on: DOE budget of the Federal Government. Solar energy (Solar cell, solar thermal). Geothermal energy. Coal energy. Ocean energy. Biomass energy. This report consists totally of 230 pages, the break down of which is 83 pages for USA section, 34 pages for West germany, 28 pages for UK, 32 pages for France, and 44 pages for a literature list in the countries outside Japan.

  4. Research on feasibility of development energy combining technology; Energy fukugoka gijutsu kaihatsu no kanosei chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Iida, Y. [Yokohama National University, Yokohama (Japan). Faculty of Engineering; Ozawa, Y. [Takasago Thermal Engineering Co. Ltd., Tokyo (Japan); Akai, M. [Mechanical Engineering Lab., Tokyo (Japan); Nishio, S. [The University of Tokyo, Tokyo (Japan). Institute of Industrial Science; Yamasaki, H. [Tokyo Institute of Technology, Tokyo (Japan); Takenaka, H.

    1996-02-01

    Various energy-related issues were analyzed in a many-sided and compound manner; and as their solutions, various combined systems were examined on the assumption that functional mediums, core technology and regional district characteristics were utilized; and an explanation was given in the case of using hydrogen as an energy medium. Hydrogen was a strong candidate capable of securing toughness in energy flow; and an idea was shaped about introducing hydrogen by steps before structuring a hydrogen society that is to replace the petroleum society. In the case of introducing a hydrogen energy medium into an intelligent building, the characteristics would be such that it is a highly efficient system capable of supplying energy in the form of electric power, hydrogen and heat, that it brings in a function for leveling a load of electric power, that it facilitates consistency with each energy in various uses, and that it is capable of dealing with a demand for hydrogen energy which is expected to increase in the future. It is highly probable that the system will become an attractive one in view of environment and social economy. 8 refs., 4 figs.

  5. Research on harmonized molecular materials; Bunshi kyocho zairyo ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Harmonized molecular materials (HMM) were researched to create functional materials adaptable to needs such as environmental harmony and high-efficient conversion in post-industrial society and aging society. Superior mechanisms function efficiently in organisms for perception, transmission and processing of information, and transport and conversion of substances. These functions are caused by harmonization between organic molecules, or organic molecule and metal or inorganic substance. HMM is a key substance to realize these functions similar to those of organisms artificially. It is the purpose of this research to develop HMMs, reform production process by innovating separation and conversion technologies, and finally realize molecular chemical plants. This research also develops high-efficient devices to contribute to the information society, and progresses the industry of bio-functional materials such as high-sensitive bio-sensor. The functions, applications and creation technologies of three kinds of HMM such as assembly, mesophase and microporous materials were researched in fiscal 1995. 956 refs., 128 figs., 13 tabs.

  6. Proceedings of RITE international workshop on valuation; Total eko balance ni kansuru kokusai workshop hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    The RITE International Workshop on Valuation was held in Tokyo and Osaka in February 1996, and eight papers on total ecobalance were reported. In The Field of Impact Assessment, described were constitution and methodology about impact assessment in a wide sense. In LCA Yesterday, Today and Tomorrow, discussed were the historical development and future outlook of LCA. In Standardization of Product Life Cycle Assessment, a survey of the present situation of LCA international standardization was made. In the Relationship between Product Life Cycle Assessment Methodology, considered was the relationship between the goal definition of the product life cycle assessment and the methodological choices. In Valuation in LCA, the present study of LCA was reviewed. Besides, reviews of the LCA study in Japan were made public.

  7. Proceedings of Japan-Germany Workshop of Bioremediation; Nichidoku bio remediation workshop hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-04

    This is a proceedings of Japan-Germany Workshop on Bioremediation held on December 4 and 5, 1995. The keynote lectures include `Environmental preservation using biotechnology` by Prof. Karube of University of Tokyo, and `Environmental technology in Germany: status, achievements, and problems` by Prof. R.D.Schmid of University of Stuttgart. In the oral session, 7 papers are presented in the microbiological aspects of bioremediation, 10 papers in the environmental monitoring, and 6 papers in the engineering aspects of bioremediation. This workshop was sponsored by the German Federal Ministry for Education, Science and Technology, New Energy and Industrial Technology Development Organization, and Research Institute of Innovative Technology for the Earth. According to the lecture by Prof. Karube, key technologies for the environmental preservation include biotechnologies, such as the culture of fine algae with high CO2 concentration resistant properties using a solar light condenser, production of effective substances from CO2, and production of organic fertilizer from the sediments of lakes and sea. 19 refs., 12 figs., 3 tabs.

  8. Report on energy saving vision in Santo-cho region; Santocho chiiki sho energy vision hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-02-01

    An energy-saving vision was decided on in Santo-cho region in Hyogo Prefecture, with its outline reported. This town is such that about 80% of the region is mountains, forests and wilderness and that aging is advancing at the rate above that of Hyogo Prefecture or the national average. Nearly entire energy of the town is dependent on the supply from outside. The energy consumption is somewhat increasing as a whole, with that of the people's livelihood/domestic sector and of transportation sector are rising. In the classification of fuels, electricity is growing in consumption. As an energy-saving vision, it aimed principally at personal surroundings in which every one got into the habit of saving energy continuously without being forced. The basic plan for the energy conservation drive consisted of inducement to an energy-saving life style, energy conservation to be spread by the next generation children, continuation of energy saving activity rooted in the region, and promotion of energy conservation as a basis for introducing new energy. The diffusion and enlightenment for children destined to lead the next generation were defined as a particularly important assignment, as was the promotion of energy conservation and environmental education. (NEDO)

  9. Fiscal 1997 for the upgrading of the Asia/Pacific coal development. Survey of the optimization of the coal transportation system in Indonesia; 1997 nendo Asia Taiheiyo sekitan kaihatsu kodoka chosa. Indonesia ni okeru sekitan yuso system saitekika chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper summarized the results of Phase 1 and Phase 2 surveys conducted based on `Agreement on the comprehensive survey of a coal transportation system in South Sumatra` concluded between NEDO and the Ministry of Mine and Energy in Indonesia. In addition to the data collection and site surveys made in Phase 1, conducted in Phase 2 were determination of sites for harbors, determination of a scenario on coal transportation from coal mines to harbors, optimization of the coal transportation system, social/economic assessment, and proposal on the optimum transportation system. The results of the simulation were as follows: It is the most advantageous to transport coal from coal deposit area to harbor by rail and from harbor to Paiton by barge weighed over 10,000 tons. Tanjung Api Api is the most advantageous as harbor. The production scale which is profitable became more than 15 million tons. The present coal price of PTBA is $25/t arriving Suralaya. The coal in this case is said to be 5500kcal/kg in quality, and the coal of the same quality to this is only profitable. 8 refs., 68 figs., 104 tabs.

  10. Researches regarding a constructing problem of a PV system. Part 1. Conscious investigation by means of a questionnaire survey; Taiyoko hatsuden system ni okeru kenchikuteki shomondai no kenkyu. 1. Anketo chosa ni yoru ishiki chosa

    Energy Technology Data Exchange (ETDEWEB)

    Nakajima, Y.; Yamazaki, R.; Kuroki, T. [Kogakuin University, Tokyo (Japan)

    1996-10-27

    The installation and introduction of photovoltaic power generation systems (PVS) in buildings are growingly expected in the construction field from now, coupled with the marketing of a solar cell module as a product for a construction material in the form of an external wall or a roof material for example. For this purpose, it is necessary at first to summarize problems that may arise at the time of or after the installation of PVS as a product. This paper examines an opinion poll, degree of recognition, current problems, etc., of PVS as a result of a questionnaire survey given to engineers and architects engaged in the actual construction business. The degree of recognition and interest was very high. Consultation or request for PVS installation was much more than predicted in numbers. Roughly 50% of the respondents reacted positively for the future installation request of PVS and, combined with the respondents who answered to look into the installation tentatively, not less than 90% were of a forward-looking opinion. The 85% of the respondents was not aware of the monitor business system for residential PVS. Further, the survey clearly brought out the importance of cost problems. 1 ref., 11 figs., 3 tabs.

  11. Fiscal 1993 survey of the base arrangement promotion for foreign coal import. Survey of the general situation of Thai coal; 1993 nendo kaigaitan yunyu kiban seibi sokushin chosa. Thai sekitan sogo jijo chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    The paper reported the energy situation in Thailand, the present and future status of coal supply/demand, the present situation of environmental policy and air pollution prevention policy and problems concerning coal and the measures for solution, and a possibility of Japan`s cooperation. In Thailand, the total coal supply amount in 1992 is 16.079 million tons, which is 9.1% of all the primary energy supply amount. The country produces only a few amount of anthracite and subbituminous coal beside brown coal. The domestic coal equals brown coal, the production of which was 15.335 million tons in 1992, 13.9% of all the primary energy demand. Concerning brown coal, 79.7% of all the brown coal supply are for electric power use, and others for industrial use such as the cement industry. The remaining reserve in developed areas is 151.4 billion tons, and the proven reserve in undeveloped areas 756 million tons. The demand for import coal was 11.25 million tons in 1996, and is expected to be 201.73 million tons in 2000. The paper pointed out some problems arising from coal production and spread of coal utilization, and described measures to solve the problems and fields where there are possibilities of Japan`s cooperation. 36 refs., 44 figs., 73 tabs.

  12. Basic research on promotion of joint implementation. Research on the overseas trend of activities implemented jointly; Kyodo jisshi suishin kiso chosa jigyo. Kyodo jisshi katsudo ni kakawaru kaigai doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The pilot phase of the activities implemented jointly (AIJ) was approved in 1995 in the 1st Conference of the Parties (COPI) of the United Nations Framework Convention on Climate Change to reduce greenhouse gas emission. In order to promote the AIJ Japan program smoothly, some practical examples in every preceding country and the situations and demands of Asian countries were researched. It was confirmed that since larger cost-effectiveness is achieved just in countries lower in emission control cost, AIJ can enhance the cost-effectiveness and promote environmental technology transfer. Japanese government had studied establishment of the framework for AIJ, and decided the basic framework of the AIJ Japan program in 1995. The government also approved the evaluation guidelines of this program which include confirmed and considered matters necessary for government offices related to this program to evaluate and approve each project.

  13. Fiscal 1994 survey of the base arrangement promotion for foreign coal import. Investigation on the trend of coal demand in Central and South American countries; 1994 nendo kaigaitan kiban seibi sokushin chosa. Chunanbei shokoku ni okeru sekitan jukyu doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    Focusing on the present status and future of coal demand in Central/South American countries and the coal trade between Central/South American countries and the U.S., the paper described the present status and future of coal demand there and the effects on Japan. Export of Colombian coal will amount to approximately 30-35 million tons in 2000. Venezuelan coal 10-20 million tons. The U.S. imported good-quality general coal low in sulfur content, 3.08 tons from Columbia and 1.39 tons from Venezuela. Coal export from the U.S. to Central/South America was mostly of raw material coal, 5 million tons in 1993 and 5.39 million tons in 1994. General coal was 180,000 tons. The U.S. has no plans of increasing US coal export to Central/South America. But it is safely predicted that Columbia and Venezuela will increase coal export to Europe in the future. It will bring about decrease in export of US coal to Europe, which connects with increasing pressure for the coal trade amount of Japan. 21 figs., 47 tabs.

  14. Fiscal 1996 survey for the upgrading of the Asia/Pacific coal development. Survey of the coal infrastructure propagation in Indonesia; 1996 nendo Asia Taiheiyo sekitan kaihatsu kodoka chosa. Indonesia ni okeru sekitan infura seibi chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-10-01

    Phase 1 survey in fiscal 1996 was conducted based on `Agreement on the comprehensive survey of a coal transportation system in South Sumatra` concluded between NEDO and the Ministry of Mine and Energy in Indonesia. In the survey, conducted were collection of data on coal fields and site surveys, collection of data on inland transportation and site surveys, collection of data on harbors and site surveys, and worked out were a simplified database and a coal transportation plan by optimization of the coal chain system. The area for survey is the periphery of the Musi River of South Sumatra. The results of the simulation by LP models were as follows: When the coal of Bukit Asam coal mine is $25/t in price, only coal of 5500Kcal/kg is profitable, and when $27/t in price, coal of 4500Kcal/kg also becomes profitable. This shows that if the coal is of good quality, it can pay arriving at Suralaya, independent of the distance of transportation. 47 figs., 63 tabs.

  15. Water quality and water pollution sources in Poyang lake, China; Poyang ko ni okeru suishitsu chosa to odakugen kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    Ito, M. [Shin-Nippon Meteorological and Oceanographical Consultant Co. Ltd., Tokyo (Japan)

    1996-01-10

    This paper summarizes the current status of water quality and pollution sources in Poyang Lake in China. The lake is located in Chianghsi Province of China, and a largest fresh water lake in China that flows out into the Yangtze river. The basin is surrounded by mountains on three sides and faces the Yangtze on one side, whereas the plains formed by the lake and the rivers flowing in extends in the center of the basin. The plains around the lake has the city of Nanchang, the capital of the province, the city of Jiujiang (both cities have a population of about 4 million, respectively), and four other cities with a size of one million people including Jingdezhen. Water supply system in the basin is used in a 37% area of the urban areas, and no sewage facilities of whatsoever are available as of 1991. The lake has COD of about 3 mg{times}1/l. No severe pollution by organic matters is seen. While the T-P concentration is at a high level, PO4-P is low. Majority of phosphorus flowing into the basin exists in the form trapped in soil particles. In order to maintain the current water quality in the future, waste water treatment is required in the basin. Construction of an oxidation pond in the vast land exposed during the drought period is a measure that can be tackled relatively easily. 1 fig., 4 tabs.

  16. Exploratory boring in Japan. ; Its history and recent topics. Chishitsu chosa boring. ; Sono rekishi to saikin no gijutsu no doko

    Energy Technology Data Exchange (ETDEWEB)

    Koike, Y. (Oyo Corp., Tokyo (Japan)); Hosaka, M.

    1993-09-01

    This paper introduces latest trends in exploratory boring technologies. The freeze sampling method freezes ground beds consisting of sand, gravels, and Shirasu in the locations where they are, and samples good-quality samples without disturbances. The air bubble boring method injects a surfactant into compressed air, and utilizes foamed surfactant as a drilling fluid, the method being capable of sampling good-quality cores even from gravel and soft rock beds. The rotary sounding method estimates ground bed strength from drilling resistance generated at a tip bit during boring. The method provides high correlation of drilling velocity, rotation speed, and thrust with uniaxial compression strength. A spar-buoy boring scaffold has been developed for scaffolding in off-shore boring. This scaffold keeps its upright position by drawing a buoyant body into water to have the buoyancy work as vertically upward tension. The scaffold makes safe works possible even under a condition of water depth greater than 15 m and tidal current of 2 knots or faster. 15 refs., 8 figs.

  17. Survey of regulations accompanied with isolation technology of carbon dioxide; Nisanka tanso no kakuri gijutsu ni tomonau hokisei no chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Regulations, conventions and agreements relating to the discharging liquefied carbon dioxide (CO2) into the bathypelagic zone from a cruising ships are investigated. The ocean storage of CO2 is not specifically prohibited by law, but must be regulated on a global scale because such treatment may impact the marine environment. In principle, treatment with impact on the nature is prohibited. Laws of environmental conservation are completed in European, Asian, and Pacific countries, which join international conventions and committees with high interests. It is suggested that the engineering technique of the storage should be improved to observe regulations and that an impact assessment for the ocean storage should be carefully conducted in full understanding of the basic premise of the regulatory systems or organizations. Furthermore, it is significant to study on the possible effect of the ocean storage of CO2 on global warming and life-cycle assessment inventory analysis, namely the balance of the energy budget between the separation and the ocean storage of CO2. 23 refs., 7 figs., 6 tabs.

  18. Survey of the actual energy consumption in the commercial/residential sector; Minsei bumon energy shohi jittai chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    A questionnaire survey was conducted of the actual energy consumption in the business sector (schools, hotels/inns, hospitals, and other service business) in fiscal 1996, and was put together with the survey conducted in the past in order to clarify the structure and trend of energy consumption in the commercial/residential sector. The survey was aimed at making basic data for the development/introduction of the petroleum substituting energy including future new energy. The consumption unit requirement of a school total was 84.9 Mcal/m{sup 2} per year, that of a hotel/inn total was 455.3 Mcal/m{sup 2} per year, and that of a hospital total was 400.2 Mcal/m{sup 2} per year. The energy consumption for business use was summarized. The consumption unit requirement of restaurants was the largest, 622.8 Mcal/m{sup 2} per year, and that of schools was the smallest. In office building business and wholesale/retailing business, electricity is largely used mostly for illumination, power, etc. In restaurants, gas is largely used mostly for its own use including cooking. In schools, energy use for space heating was the largest, but was almost the same as that in office buildings in terms of the amount. 179 figs., 31 tabs.

  19. Investigation into introduction and promotion of clean energy cars; Clean energy jidosha no donyu sokushin ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Gazing the introduction target for fiscal 2000 and 2010, the paper arranged comprehensively and systematically the trend in Japan and overseas of clean energy cars and described subjects. Themes of the study to be promoted in terms of electric cars are: Li secondary batteries, heightening of performance of batteries such as Ni-hydrogen, power generation/power storage hybridization to make the long-distance travel possible. For the price reduction, the body is so made as to make it possible to select three kinds of power unit, that is, gasoline, hybrid, and electricity. Low noise and easy operation are also important. As to natural gas vehicles, the price is more than three times as high as that of gasoline vehicles, and relaxation of the related regulations on metal tanks, the Road Traffic Act, etc. is necessary. It is indispensable to establish quantity production and technical standards and reduce cost by the remodeling for bi-fueling with gasoline engines, development of FRP tanks, etc. Methanol vehicles are the closest to gasoline vehicles, but the introduction is delayed having no groups for generalization. Solar and hydrogen cars are promising, but are on a stage of developing the basic technology. 43 figs., 104 tabs.

  20. Technologies and techniques for analysis and use of genome information, 1997; Genome joho kaidoku riyo gijutsu no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper clarified the whole image of cell functions by elucidating the function and manifestation control mechanism of genes existing in genomes, and the network of their interactions, and surveyed applicability of the useful functions obtained of cells and proteins to the industrial field. The survey was made from a viewpoint of the fields of both biology and information science. Especially, based on the function-known DNA base sequence database, the following technologies were surveyed: technology to predict the function of the function-unknown DNA base sequence, search/separation technology to acquire the genes to be functionally elucidated in a state of being suitable for manifestation, technology to get perfect proteins by effectively manifesting the genes to be functionally elucidated, and technology to analyze the function of the proteins obtained by manifestation of genes. Further, the International Symposium was held which is titled `Genome Research Opens a New World to Bioindustry (New Developments in Genome Informatics Technologies). With the future progress of technology to decipher and use genome information, the construction of much newer genome industry is anticipated. 165 refs., 44 figs., 10 tabs.

  1. Research on elaboration of the evaluation guidelines for activities implemented jointly; Kyodo jisshi katsudo hyoka guide line sakutei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Elaboration of the evaluation guidelines for activities implemented jointly (AIJ) was researched to prevent the earth from warming. AIJ is the means to globally promote countermeasures against global warming cost-effectively by optimally combining every country`s technology, know-how and fund. AIJ was established in the 1st Conference of the Parties (COPI) of the United Nations Framework Convention on Climate Change in March, 1995. The pilot phase of AIJ is first carried out by voluntary workers jointly with developing countries under the agreement of the parties. The current situation of activities is reported in COPI as materials for evaluation of AIJ. To promote AIJ, elaboration of the evaluation guidelines for AIJ Japan program is also necessary for Japan. This research arranged the contents of the evaluation guidelines and the method of classifying projects for AIJ Japan program, and carried out some case studies of promising projects to reduce greenhouse gas emission for future proposal. 3 figs., 31 tabs.

  2. 1000m depth boring at Inagawa, Hyogo prefecture. 1. Overviews; Hyogoken Inagawamachi ni okeru 1000m boring chosa. 1. Gaiyo

    Energy Technology Data Exchange (ETDEWEB)

    Sato, T.; Kusunose, K.; Cho, A.; Tosha, T. [Geological Survey of Japan, Tsukuba (Japan); Kiyama, T.; Yamada, F. [Mitsui Construction Co. Ltd., Tokyo (Japan); Aizawa, T. [Sancoh Consultants Co. Ltd., Tokyo (Japan)

    1996-05-01

    Various field experiments were carried out using a 1000m deep borehole at Inagawa town, about 10km north of the focus of the Hanshin-Awaji Great Earthquake and directly above the area where shallow earthquake activities have intermittently occurred. These experiments included stress measurement by hydraulic fracturing, hydrophone-aided VSP, permeability tests and observation of various types of logging. The laboratory experiments were also carried out, including measurement of various properties and stresses of the core samples. The stress-depth relationship, determined by the hydraulic fracturing method, shows that the stress gradient well coincides with the Western Japan standard at a depth up to 700m, whereas it is approximately twice as high as the standard at a depth of 946m, at which core disking and borehole break-out are clearly observed, and hence stresses conceivably concentrate locally. Orientation of the maximum horizontal compressive stress is E-W at a depth of around 600m, but greatly changes to NNW-SSE at a deeper position. 4 refs., 5 figs.

  3. Application of VSP to geological investigation; P ha oyobi S ha VSP wo mochiita shinso chishitsu chosa

    Energy Technology Data Exchange (ETDEWEB)

    Kinugasa, Y. [Geological Survey of Japan, Tsukuba (Japan); Feng, S.; Sugiyama, T.; Ishikawa, K. [Chuoh Kaihatsu Corp., Tokyo (Japan)

    1997-05-27

    Discussed in this paper are the P-wave and S-wave zero-offset VSPs carried out utilizing boreholes located in Nada Ward, Kobe City, and Hokudan-cho, Hyogo Prefecture, as part of the deep layer boring survey following Hanshin Earthquake Disaster. This effort aims at the elucidation of P-wave and S-wave velocity structures, high-precision identification of data obtained by the surface reflection method, and collection of basic data for active faults investigation in the future. Among the velocity structures obtained for various layers, the S-wave velocity structures in particular agree with the stratigraphy excellently and may be utilized in seismic analyses to be conducted in the future. Reflection from geological boundaries is received with precision, providing accurate information about correlation between reflection and geological cross sections. The records will be useful in formulating plans for reflection surveys for instance of the boundary between the Osaka group and Kobe group. Generally speaking, reflection coefficients are large when the reflection is from a boundary where difference is great in elastic wave impedance (mainly difference in velocity). In the case of the boundary between the Kobe group and granite in Awaji Island, however, no strong reflection is found despite the great difference in velocity. This is attributed to the complicated, sharp inclination of the basement rock and to its weathering. 4 refs., 8 figs.

  4. Feasibility study on introducing new energy systems into Asian villages; Asia sonraku ni okeru shin energy donyu kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For improvement of living standards in unelectrified areas of Asia, the feasibility of new energy power generation systems was surveyed. The degree of electrification of local areas is different every country, and Thailand is ahead of other countries, while Laos and Cambodia are most unelectrified. Power supply of 100W/house seems to be adequate for local areas because of weather condition, housing situation and life-style. Economic support and education on electricity are necessary for poor areas. Although needs for new energy is increasing, the priority is given to industrial and urbanized areas because of cost and investment effects, and remote areas are dependent on grant- in-aid. Resources of photovoltaic, wind power and micro- hydraulic energies are abundant, however, selection of energy and verification of its usability are important, and the local energy density maps were thus prepared. In introduction of new energy, after selection of energy suitable for an area concerned, such geographical and social conditions should be surveyed as road condition, water rights, land utilization, economic support system, policy and intention of inhabitants. 76 refs., 68 figs., 91 tabs.

  5. Investigational research on highly functional carbon and related materials (HF-CRMs); Tansokei kokino zairyo no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper arranged a fiscal 1997 guiding study of highly functional carbon and related materials (HF-CRMs). In the material invention field, described were the composition by interatomic control technology and the characteristics of pure carbon nanotubes, carbynes, graphite, fullerene polymer, porous carbon, etc. Heteroelement substituted materials were also described. The paper also reported the application of HF-CRMs to the electric/chemical field, and arranged the basement technology and applicability of diamond in particular. The subjects are enhancement of composition technology and reduction of the price of processing technology. Especially, the control of impurities and defects is a must for the electric use. The application of HF-CRMs to the mechanical field was reported. Superlubricant, wear resistant and high temperature corrosion resistant materials were taken up, and were surveyed in terms of their use mostly to refuse incineration power generation boilers, and thermal power generation use turbines. In the development of mechanical materials, technologies were surveyed especially for large area/complex shape film formation to form films for various parts, functionally gradient film formation for relaxation of thermal stress and residual stress in the film, and high speed film formation for quantity production. 363 refs., 88 figs., 10 tabs.

  6. Feasibility survey of thermoelectric conversion technology using semiconductors; Handotai wo riyoshita netsuden henkan gijutsu no kanosei ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    1993-03-15

    The paper takes notice to thermoelectric conversion technology using semiconductors and investigates it in a wide range from high temperature to low temperature to study its feasibility. It is found that in Bi-Te alloy elements applicable to a temperature range of around 200{degree}C, some are over 3.5{times}10{sup -3}K{sup -1} in performance index, and performance of the element can be practically improved in the near future. The thermoelectric power generation system using waste heat from the fuel cell power plant, which is 5-6% in conversion efficiency, can generate output more than 100kW and is expected to improve by approximately 1% in plant overall efficiency. The construction cost, however, is around 1.6-1.9 million yen/kW. The thermoelectric power generation plant which is modeled on No.2 generator of Hatchobaru geothermal power plant can generate electric output of 10-12.5MW, which is smaller than that of the conventional geothermal power generation. The construction cost is around 3.2-4.1 million yen/kW. Even if advantage of the system in running cost is considered, attractive systematization seems to be difficult. 88 refs., 81 figs., 17 tabs.

  7. Survey of the actual state of energy consumption in the commercial/residential sector; Minsei bumon energy shohi jittai chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In relation to the energy consumption in the residential sector in fiscal 1996, a literature examination and a questionnaire survey were conducted in large- and medium-sized cities. The questionnaire survey was made in the 23 wards of Tokyo, Nagoya, Osaka, Takamatsu and Fukuoka. Questionnaire papers of 1323 were recovered, which shows a recovery rate of 20.0%. The result of the investigational analysis was as follows. Concerning detached houses, unit requirement of energy consumption is the largest in Sapporo, 23,519 Mcal/household/year, which is twice 11,000 Mcal/household/year, the level of that in other five cities. In Hokkaido, the rate of space heating is high, and that of the detached house occupied 65% of all the energy consumption. In the other cities, the rate of hot water supply is 30-50% of it. By energy source and by use, kerosene largely dropped in unit requirement of the consumption from fiscal 1992 affected by a sharp decrease in demand for space heating. On the other hand, town gas largely increased by 14.7% over fiscal 1992 supported by the increased use in space heating. Electricity was also up by 8.0%. 110 figs., 53 tabs.

  8. Indoor environment and allergy except housedust mite; Jukankyo to allergy ni kansuru dani igai no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Nakao, F.; Nishima, S.

    1998-05-31

    Pathopoiesis factors of allergic diseases include immune antibody productivity sthenia reacting with antigens such as mite or the like in allergy reaction which is regarded as based on genetic fact (atopic diathesis), and environmental factors as external factors. The environmental factors are further classified into specific factors (antigens) and nonspecific factors. The former factors include the indoor factors such as mite, mould, animals bred indoor, etc., and outdoor factors such as pollen and so on. The latter factors include indoor factors such as passive smoking, carbon monoxide, nitrogen oxides, formaldehyde, etc., and outdoor factors such as sulfur oxides, nitrogen oxides, airborne particles and so on. In this paper, the environmental factors in relation to allergic diseases expect mite are introduced. Besides mould, cockroach/insect, fur dust and dandruff of animals, adjustment of room temperature/humidity, smoking, indoor and outdoor air pollution are mentioned as the environmental factors expect mite, and the cause-effect relations thereof are explained. 24 refs., 3 figs., 7 tabs.

  9. Research trend survey on the stable isotope utilization technology; Antei doitai no riyo gijutsu ni kansuru kenkyu doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This report reviews the activities and the trends in the area of the stable isotope use attracting attention recently. In the medicine and clinical treatment sector, the remarkable trends are the extension of {sup 13}C use. The breath test and the magnetic resonance spectroscopy (MRS) diagnosis have been developed as inspection methods. It is noted that investigation has been initiated on the magnetic resonance imaging (MRI) using {sup 3}He and {sup 129}Xe for the lung imaging. In the organic chemistry and biochemistry sector, the stable isotopes are used for analyzing the structures of complicated natural compounds and materials relating to life science and for analyzing the chemical reaction mechanism of organic compounds. In the nuclear energy sector, {sup 10}B and {sup 7}Li have been used as neutron absorption materials and pH neutralizing reagent, respectively. In the analysis and measurement sector, the process of isotopic dilution is used for the environmental analysis of trace elements including harmful substances. Among various separation methods of isotopes, well studied uranium enrichment processes and deuterium separation processes are described. Separation of {sup 15}N by ion exchange resin method and plasma ion cyclotron resonance (ICR) isotope separation have been studied, recently. 133 refs., 53 figs., 7 tabs.

  10. Research study on analysis/use technologies of genome information; Genome joho kaidoku riyo gijutsu no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For wide use of genome information in the industrial field, the required R and D was surveyed from the standpoints of biology and information science. To clarify the present state and issues of the international research on genome analysis, the genome map as well as sequence and function information are first surveyed. The current analysis/use technologies of genome information are analyzed, and the following are summarized: prediction and identification of gene regions in genome sequences, techniques for searching and selecting useful genes, and techniques for predicting the expression of gene functions and the gene-product structure and functions. It is recommended that R and D and data collection/interpretation necessary to clarify inter-gene interactions and information networks should be promoted by integrating Japanese advanced know-how and technologies. As examples of the impact of the research results on industry and society, the present state and future expected effect are summarized for medicines, diagnosis/analysis instruments, chemicals, foods, agriculture, fishery, animal husbandry, electronics, environment and information. 278 refs., 42 figs., 5 tabs.

  11. Investigation on development of advanced materials by solvothermal technique; Sorubo thermal hanno riyo senshin zairyo kaihatsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Solvothermal reaction is reaction under high temperature and high pressure, which is expected to fabricate new functional materials. In this study, the materials are classified into two fields, i.e., inorganic materials, metals and their composites and organic materials and their composites. The current status of R and D of production and processing technology in each field is surveyed and the prospect of it is discussed. For the inorganic materials, metals and their composites, it is explained that very fine metal oxide particles, complex oxides, single crystals, whiskers, compounds with layer structure, metastable compounds, ion conductors and catalysts with high ability could be produced only by controlling the solvothermal reactions in atomic order. For the organic materials and their composites, surveyed results of the solvothermal technique using non-aqueous solutions are mainly provided. The necessity of a national project for researches on the solvothermal reactions is proposed from the viewpoint of resource, environment and energy. 777 refs., 38 figs., 26 tabs.

  12. Population dynamics in biological treatment process. ; Population dynamics of bacteria for biological phosphorus removal. Population dynamics to kankyo joka. ; Datsurin kin gun no population dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Okada, M. (Hiroshima Univ., Hiroshima (Japan). Faculty of Engineering)

    1992-09-10

    The microbial industry can easily cultivate only the specific microorganism by introducing the closed reaction system and the sterile operation. When the superior bacteria is selected or it is created by the gene manipulation, therefore, it is not so much difficult that it is utilized for production. Since the water treatment is an open reaction system many microorganisms can join, however, it becomes to be important that how the necessary microorganisms, for example, the dephosphorylation bacteria etc. out of them are let fixed in the reaction system, and win in a competition with the other microorganisms, and in addition, are let display their functions stably for a long period. In this regard, in this paper, concerning to the issues that whether the dephosphorylation bacteria exists or not, how the behavior of dephosphorylation bacteria in the activated sludge should be clarified, what kind of behavior the dephosphorylation bacteria shows in the dephosphorylation activated sludge and so forth, grasping the population dynamics of microorganism, and furthermore, including the methodology to control it, is outlined. 31 refs., 2 figs., 1 tab.

  13. Visualization of sooting field in an emulsion droplet flame by using microgravity environment; Bisho juryoku kankyo wo riyoshita nyuka nenryo ekiteki kaennai susu nodoba no kashika

    Energy Technology Data Exchange (ETDEWEB)

    Segawa, D.; Kadota, T. [University of Osaka Prefecture, Osaka (Japan). Faculty of Engineering; Tsue, M.; Kono, M. [The University of Tokyo, Tokyo (Japan); Yamasaki, H. [Ehime Univ., Ehime (Japan). Faculty of Education

    1999-07-25

    Sooting field in a flame formed around a suspended droplet was visualized under microgravity using the planar laser light scattering technique. The soot concentration and the instantaneous soot amount were approximately estimated from the intensity of the scattered light using the image analysis system. The fuels employed were water-in-oil emulsions composed of n-dodecane, water and surfactant. The water content was varied from 0 to 0.2 in volume. A soot layer which was concentric with the droplet was observed inside the luminous flame. The results show the unsteadiness of the sooting behavior as well as the flame behavior. The maximum of the soot concentration is located near the inner edge of the soot layer. The time history of the instantaneous soot amount is similar to that of the instantaneous flame radius. The maximum of the soot concentration does not vary with the water content, while the soot amount decreases significantly with the water emulsification. (author)

  14. Evaluation of building envelopes from the viewpoint of capability of controlling thermal environment; Onnetsu kankyo chosei noryoku ni yoru kenchiku gaihi no hyoka no kokoromi

    Energy Technology Data Exchange (ETDEWEB)

    Umeda, K.; Ono, S. [Taisei Corp., Tokyo (Japan); Shukuya, M. [Musashi Institute of Technology, Tokyo (Japan)

    1996-10-27

    The ability that architectural space improves the thermal environment in comparison with outdoor environment is called the `capability of controlling thermal environment.` As the value becomes higher, the indoor thermal environment is more improved. In this paper, the controlling capability of six building envelopes with different window systems was compared. The heat transfer in the wall and window system is approximated using a lumped mass model of heat capacity to obtain a heat balance equation and combined with the heat balance equation in indoor air for backward difference. The wall surface temperature and indoor air temperature in a calculation model are then calculated. A radiation absorption coefficient is used for mutual radiation on each wall. In the model, the adjoining room or first- and second-floor rooms were made the same in conditions as the model on the assumption that the one-side lighted office in an RC reference floor is in the non-illumination and non-airconditioning state. In summer, the controlling capability remarkably varies depending on the window system. For the window facing the south, the annual capability is more advanced than in other directions and the indoor thermal environment is improved on the average. 7 refs., 12 figs., 1 tab.

  15. Environmentally friendly type coal utilization technology transfer project. Downstream field; Kankyo chowagata sekitan riyo gijutsu iten jigyo. Karyu bun`ya

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The paper arranged the result of the clean coal technology transfer project carried out during October to December, 1996. For the purpose of supporting introduction/spread of clean coal technology (CCT) in Asian and Pacific countries, the project invited engineers of the countries to Japan, aiming at fermentation of the understanding of CCT and improvement in ability. The project was held by NEDO and managed by Center for Coal Utilization, Japan. The manager course is for policy decision makers, management and senior management (plant manager class). By taking up CCT assessment and a menu of economical efficiency, prepared was the environment to which CCT is introduced in case of working out policy and planning plant/equipment investment. Moreover, the engineer course is for policy planners, medium-class management (section chief class), senior engineers (planners), and takes up materials for judgment in case of planning CCT facilities and proposing measures to reduce environmental loads by management and improvement of facilities at the same time. Fifteen engineers were invited: 6 from China, 3 from Indonesia, 3 from the Philippines, and 3 from Thailand

  16. Development of an observation robot `Flying Fish` for comprehensive measurements of ocean environment; Kaiyo kankyo sogo kansoku robot `flying fish` no kaihatsu kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Koterayama, W.; Yamaguchi, S.; Nakamura, M. [Kyushu Univ., Fukuoka (Japan). Research Inst. for Applied Mechanics; Akamatsu, T. [Mitsubishi Heavy Industries, Ltd., Tokyo (Japan)

    1996-12-31

    With an objective for spatial continuous measurement of physical, chemical and biological amounts in ocean, development has been made on a wing controlled towed vehicle, `Flying Fish` which is capable of controlling depth, pitch and roll. Numerical simulations and two-year sea experiments have been carried out for the development. Flying Fish consists of a sub-system comprising a towing vehicle, towing cables, and on-board controllers. In a steady state, Flying Fish can be controlled at accuracy for depth of {plus_minus} 0.05m, pitch of {plus_minus} one degree, and roll of {plus_minus} 0.5 degree. This accuracy is sufficient for operating a chemical analyzer, the dissolved carbonic acid analyzer. Even in a non-steady state such as in changing the depth, the pitch can be controlled at {plus_minus} 3 degrees and the roll at {plus_minus} 0.5 degree. This extent of attitude change is within a range rendering no problems in maintaining accuracy of the measurement devices. The result of sea experiments for movements of Flying Fish agreed with that of the numerical simulation at practically usable accuracy. Flying Fish is verified as an effective system in investigating spatial variations in ocean data. 10 refs., 15 figs., 1 tab.

  17. Feasibility design of a floating airport and estimation of environmental forces on it; Futaishiki kuko no sekkei to kankyo gairyoku no suitei ni kansuru kento

    Energy Technology Data Exchange (ETDEWEB)

    Inoue, Y.; Tabeta, S.; Takei, Y. [Yokohama National University, Yokohama (Japan). Faculty of Engineering

    1996-12-31

    A rough design was performed on a floating airport. On this floating structure, environmental external force was estimated, mooring design was carried out, and discussions was given on the position retaining performance important for airport functions and behavior of the floating structure. The discussion was given on cases that the airport is surrounded and not surrounded by floating breakwaters. A floating structure which becomes super-large in size requires considerations on force due to sea level gradient as a result of a tide. Deriving flow condition changes and force acting on the floating structure simultaneously by using numerical calculations makes it possible to estimate current force given with considerations on influence of the flow conditions created by installing the floating airport. Estimation was carried out by using a zone dividing method on wave drifting force acting upon the floating airport. As a result, it was found that installing floating and permeating type breakwaters can reduce the wave drifting force acting on the floating airport. The wave drifting force working on the floating airport can be reduced by installing the floating and permeating type breakwaters to lower levels than when no such breakwaters are installed. The airport may be moored with less number of fenders when the fenders of the same type are used. 18 refs., 10 figs., 5 tabs.

  18. FY1995 study of design methodology and environment of high-performance processor architectures; 1995 nendo koseino processor architecture sekkeiho to sekkei kankyo no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The aim of our project is to develop high-performance processor architectures for both general purpose and application-specific purpose. We also plan to develop basic softwares, such as compliers, and various design aid tools for those architectures. We are particularly interested in performance evaluation at architecture design phase, design optimization, automatic generation of compliers from processor designs, and architecture design methodologies combined with circuit layout. We have investigated both microprocessor architectures and design methodologies / environments for the processors. Our goal is to establish design technologies for high-performance, low-power, low-cost and highly-reliable systems in system-on-silicon era. We have proposed PPRAM architecture for high-performance system using DRAM and logic mixture technology, Softcore processor architecture for special purpose processors in embedded systems, and Power-Pro architecture for low power systems. We also developed design methodologies and design environments for the above architectures as well as a new method for design verification of microprocessors. (NEDO)

  19. Research and development cooperation project on environmental measurement using laser radar in fiscal 1994; Kankyo keisokuyo laser radar no kaihatsu ni kansuru kenkyu kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    The paper outlined activities in fiscal 1994 in the R and D cooperation project on a laser radar for environmental measurement. In the activities in fiscal 1994 of `the ODA laser radar development committee,` the committee held four meetings, two field surveys were carried out, and two researchers were invited from Indonesia. In the field survey, the environment in Jakarta city was investigated in terms of changes in population and number of the cars registered. Further, from data collected during 1994-1998 in the central Jakarta city, the following were made clear: the trend of a decrease in SO2, the trend of a rapid increase and an excess of NO2 content over the environmental standard, the status of pollution of which the level is close to the upper limit of the environmental standard of dust, etc. In the meeting of the policy study for the field survey at LIPI headquarters, Japan proposed a system which is constituted of a difference absorption laser radar, two Mie scattering laser radars, and a central processing unit. The sites proposed were studied in cooperation with Indonesia. 40 refs., 65 figs., 9 tabs.

  20. Geological elements closely related to the living environment and the mapping; Seikatsu kankyo ni missetsuna chishitsu yoso to sono joho teikyo

    Energy Technology Data Exchange (ETDEWEB)

    Endo, H. [Geological Survey of Japan, Tsukuba (Japan)

    1997-04-01

    Procedures and systems for presenting mapping information in use in the vicinities of Sendai City and Yamagata City are described. Salinity in the groundwater grows higher from the coast toward the inland areas in the vicinity of Sendai City while there is subsidence of ground in the vicinity of Yamagata City. The ground water flow between the headwater conserving hills and mountains and the water consuming areas in the plane, as well as the spatial distribution of water permeability in the ground, relates to environmental problems. Excessive pumping, development in the peripheral regions, and wastes also pose problems in this connection. The enlargement of urban areas results in an increase in potential landslides and in the damage during earthquakes. There are faults in the crowded part of Sendai City while Yamagata City includes Mt. Zao with its eruption in the past and resultant large-scale ground failures written in the record. Urban geology conceptualizing environmental geology is a branch of geology that aims at an interdisciplinary study of these problems involving every field of geology. Environment-oriented geological charts, etc., in which geological attributes, history and prediction of damage, and data of hydrological environments are integrated, are indispensable. Their investigation, compilation, and utilization are mandatory. 2 figs., 1 tab.

  1. Information system base environment in internet age: C Solution{sub TM} Webtop platform; Internet jidai no joho system kiban kankyo: C Solution{sub TM} Webtop platform

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The information system (Web base system) on internet using WWW (World Wide Web) technology is expected to spread in various fields. As C Solution{sub TM}, a Webtop platform was developed which is the base environment for building the Web base system, a system having high reliability and high performance as well as being expandable and connectible to an existing system, with the application in progress to business systems for customers. The Webtop platform has been widely applied to various businesses and operations such as an order entry system for manufacturers and a history control system for local banks. (translated by NEDO)

  2. Water management and regional environment in the Hetao irrigation area, Inner Mongolia, China; Uchimoko kagaikanku ni okeru mizu kanri to chiiki kankyo

    Energy Technology Data Exchange (ETDEWEB)

    Ji, B.; Akae, T.; Nagahori, K. [Okayama Univ. (Japan)] Otsuki, K. [Tottori Univ. (Japan)

    1998-08-01

    The history of the Hetao irrigation area can be said as the history of war in arid and semi-arid areas fought between human activity and environmental harmony. Balance of the natural water circulation is damaged as a result of agricultural production by irrigation in the Hetao irrigation area, and salt damage occurred to worsen the environment of the area. Drainage facilities are introduced as the improvement measures, but it is not easy to restore the once-damaged natural environment. Increase of salt damaged land in the area is restrained by the drainage facilities, but the incoming of salt exceeds the outgoing. The scale of the present drainage facilities is not satisfactory for restoring the salt damaged land. The salt content of the water taken in the Hetao irrigation area from the Yellow River is increasing every year influenced by the drainage from the upstream areas of the Hetao irrigation area. At the same time, untreated waste water is drained in the Yellow River. As a result, the present drainage facilities work to mitigate salt drainage in the area, but help to worsen the salt damage in downstream areas. 5 refs., 3 figs., 3 tabs.

  3. Project to promote the technical development of global environmental industries. International research exchange project; Chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo. Kokusai kenkyu koryu jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Exchanges with researchers/research institutes in overseas countries have an important meaning in promoting the research and development toward the creation of new research fields where the solution to the environmental problem is aimed at and toward the construction of new technological systems. Therefore, under the cooperation of Research Institute of Innovative Technology for the Earth (RITE), and RITE related researchers and societies, given were invitation and dispatch of researchers to international conferences and symposia involved in the global environment related technology, and exchanges with major overseas research institutes/universities. At the same time, based on the short-term invitation and dispatch so far given, a system was established for medium- and long-term dispatch/invitation of researchers who are thought to hold an important position in the future research activities. From the results obtained, domestic and foreign exchanges relating to the latest research could be promoted. In addition, researches in the basic domain related to the global environmental technology were advanced in a variety of fields overseas. The numbers of invitation and dispatch given in fiscal 1995 were 12 and 13, respectively, the results of which were included in this paper. 121 refs., 74 figs., 11 tabs.

  4. Achievement report for fiscal 1998. Home rehabilitation system for aphasia patients; 1998 nendo seika hokokusho. Shitsugosho zaitaku rehabilitation shien system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    Development has been made on the element technologies for a home rehabilitation system for aphasia patients. First, studies were performed on an authoring procedure for aphasia patient training, and partial trial production and development were carried out on an authoring system for the training program formula. Then, studies were executed on a training simulation and analysis filter, and partial trial production and development were implemented on a home rehabilitation supporting and self-teaching system. Next, an input and output mechanism for voice signal processing was studied, and aphasia patient and caregiver human interface was partially fabricated on a trial basis. In addition, a remote rehabilitation communicating method was researched, and partial trial production was carried out on a remote rehabilitation evaluation and diagnosis support means. Finally, communication assisting means were researched, and a communication assisting system was partially produced on a trial basis. Good evaluation results were given on a demonstration system. Although partial indications were given on minute parts, practical agreement was obtained as a whole. Great expectation was given particularly on the remote rehabilitation system and the authoring system. (NEDO)

  5. Fiscal 2000 achievement report. Welfare technosystem research and development (Kamogawa); 2000 nendo welfare technosystem kenkyu kaihatsu (Kamogawa) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of assisting in-home medical care, a system to enable in-home acquisition, compression, accumulation, distribution, and regeneration of auscultatory sounds (cardiac sound, respiratory sound) is added to telemedicine assisting system technologies for remotely located doctors' decisions and instructions for in-home medical care. In fiscal 2000, for improvement on the already-developed system, operationality was improved, uptake was realized of still images (digital camera pictures) mainly for diseases in dematology where such is strongly demanded, and a transmitter function was augmented. The system enables the PHS (personal handyphone system) aided exchange of medical data between portable terminals on patrol and (doctors') personal computers through the personal computer server in the hospital. Doctors are able to administer remote telemedicine now that biomimetic information on remotely located patients such as still medical images and auscultatory sounds necessary for diagnosing is available in the hospital. (NEDO)

  6. Study mission report on geothermal development in America and Hawaii. 4. Geysers geothermal area; America Hawaii chinetsu chosadan hokokusho. Geysers

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-15

    The Geysers Known Geothermal Resource is steam predominant type having the largest capacity in the world. The power generating capacity has reached 2,000 MW in 1989, and is currently 1,812 MW due to the rejection of old facilities. The operation in 1995 was 1,155 MW. This area is in the complex of sedimentary rocks and igneous rocks relating to the plate sinking. The average depth of geothermal reservoir is around 2,500 m. The aerated drilling and multiple leg drilling are employed for drilling. For the former, compressed air is injected in the circulated drilling mud. Suitable drilling mud to the depth and lost circulation can be supplied by controlling the apparent specific gravity of drilling mud. For the latter, two or three secondary legs without cement casings are drilled like a fork against the fault fracture zones producing steam. The condensate is sent to the H2S treatment system and ClO2 system, and H2S in the noncondensable gas is removed by the Stretford Abatement System. Concentrates of arsenic and mercury are below the regulated values. 7 refs., 21 figs., 1 tab.

  7. Summary report of the overseas researcher invitation program in FY1996; 1996 nendo kaigai kenkyusha shohei jigyo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    To exchange research information, Mr. Koernaen Inif was invited from the Ministry of Industry and Commerce, Indonesia in the period between 4th November in 1996 and 4th February in 1997 as a part of the overseas researcher invitation program in FY 1996. The research theme is `Investigation of low cost removal method of COD and BOD from industrial waste water: Biodegradation of lignin in the waste water from pulp industry using anaerobic bacteria.` The institute of the invited researcher has promoted investigations for improving water quality of the Surabaya River. The largest reason of the water quality pollution of the Surabaya River is caused by the waste water from paper and pulp industry, and pollutants are COD and BOD. In major factories with economic margins, waste water treatments have been conducted, which do not satisfy the waste water standard of factories. In this investigation, the treatment technology information of industrial waste water were collected. The information were summarized for contributing to the future research and development in Surabaya. The objective was to obtain the biodegradation techniques of lignin using anaerobic bacteria. 51 refs., 7 figs., 5 tabs.

  8. Achievement report for fiscal 1998. Esophageal vocalization aid system; 1998 nendo seika hokokusho. Shokudo hassei hojo sochi

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    Development has been made on element technologies for an esophageal vocalization aid system. With regard to the speaker, selection and trial production were performed on a speaker used for a phono-coupler to be used in coupling with a telephone transmitter. Performance not differing from that in the currently used telephone set was obtained in the overall characteristics evaluation using a dummy telephone circuitry. For the microphone, two kinds of hands-free microphones were fabricated on a trial basis. In order to develop pitch extraction and amplitude pitch conversion systems, pitch extraction performances were compared and discussed on the following five methods: the auto-correlation method, the Cepstram method, the average magnitude difference function (AMDF) method, the simplified inverse filter tracking (SIFT) method, and the time-domain excitation extractor using minimum perturbation operator (TEMPO) method. The hauling phenomenon, having come up as a problem in an auxiliary digital device, was analyzed to discuss methods for prevention thereof. In developing a voice/unvoiced distinction judgment method, a method using low domain power and high domain power was discussed. Development has been made on exclusive ICs, a voice analyzer, and the using feeling enhancing technology. In developing a total system, a digital unit incorporated esophageal vocalization aid system was developed and improved. (NEDO)

  9. Achievement report for fiscal 1998. Totally implantable artificial heart system; 1998 nendo seika hokokusho. Tainai umekomigata jinko shinzo system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    Development has been made on element technologies for a totally implantable artificial hear system. Performance improvement in a regenerative pump has enhanced high-speed followability of the system, having achieved the maximum ejection flow rate of 11.8 liters per minute at pulse of 120 bpm. A system endurance test has elapsed 551 days and is still continuing. Based on the result of evaluating the basic functions of the first prototype of a magnetically suspended pump, trial production was performed on an improved magnetically suspended pump whose volume of implantation in the left and right pumps was reduced to about 320 cc. The energy transmission system achieved transmission efficiency of 82% or higher, and temperature rise of three degrees C. In the information transmission system, laser diodes were used to make information transmission possible at 9600 bytes per second. The implanted secondary battery is a lithium ion battery, which was confirmed of operating the artificial hear for longer than 30 minutes. With regard to the structural and coating materials, no thrombus formation was observed in an animal experiment for the magnetically suspended continuous pump whose liquid contacting parts made of polycarbonate are heparinized. Titanium was used in the liquid contacting parts and the texture contacting parts of the left heart magnetically suspended pump. (NEDO)

  10. International Workshop on Carbon Cycling and Coral Reef Metabolism; Sangosho no tanso junkan ni kansuru kokusai workshop hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-16

    The paper described the International Workshop on Carbon Cycling and Coral Reef Metabolism which was held at Miyako-jima, Okinawa Pref. on October 17-24, 1995. In the workshop, researchers got together which are involved in marine chemistry, marine biology, coral ecology, and environmental science, and discussed the carbon cycling and metabolism of coral reef. Discussions were made on what the coral reef ecosystem is, and what the definition of a sink or a source for CO2 is. Also discussed were scales of how much time and space should be considered to make these issues clear. Further, it was proposed that it was necessary to investigate carbon balance of both the whole system and the components of the system and to keep track of mass transfer among neighboring components of the system. Seventeen presentations were given. The workshop obtained a definite consensus on carbon balance of the coral reef system. 123 refs., 39 figs., 9 tabs.

  11. Report on new energy vision at Hinase Town area; 2001 nendo Hinase cho chiiki shin energy vision hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-03-01

    With an objective of accelerating introduction of and uplifting consciousness on new energies at Hinase Town in Hyogo Prefecture, investigations and discussions were given on the energy demand, quantity of new energies available, and the new energy introduction projects for the town, thus a new energy vision was established. The estimated amount of energy consumption in Hinase Town is 242,814,320,000 kcal in fiscal 2000. The amount of carbon dioxide discharge associated therewith is 76.57 t-CO2/year. Regarding the energy consumption by departments, the industrial department consumes the most, followed by the transportation department, civil household department, and civil business department. The new energy introduction projects have discussed servicing of the bio-gas plant utilizing organic wastes and cogeneration, the new energy introduction projects for the Natural Energy Island at Kakui Island and the ocean ranch consisted of the use of solar heat water warmer, solar cell powered street lights, photovoltaic power generation, and electric cars for sightseeing visitors, the Eco-school promotion project for primary schools, introduction of energy saving devices into the town office, and the new energy proliferation and enlightenment project. (NEDO)

  12. Manufacturing facilities of pharmaceutical products and measures for purification of its environment. On the consideration and several utilization of bioburden in the environmental area for pharmaceutical related plants; Iyakuhin no seizo shisetsu to kankyo seijoka taisaku. Yakuji kanren seihin no seizo kankyo ni okeru baio baden no kangaekata to sono riyo ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Ishizeki, C. [Yokohama National Univ. (Japan). Faculty of Engineering

    1994-07-31

    The expression, bioburden, is used by many organizations such as WHO and ISO in the field of pharmaceutical related products and is defined as the number and kind of microorganisms which exist as suspended bacteria attached to the object or in an area under the condition close to the nature. In case when this word is used as a nonexperimental element, in the area of production environment, the measurement of the number and kind of microorganisms related there becomes the main concern and in case when the word is used as the element of experiment, test and research, it is utilized in sterilization, sterile filtration, etc. as microorganism load. This article is a general review with occasional insertion of the author`s own views on the concept and utilization concerning bioburdens in the production environment of pharmaceutical related products (medicine, tool for medical treatment, cosmetics, etc.) and explanation is given on the concept and meaning of bioburden grasping of the current state of bioburden and its analysis, general idea to be borne in mind in measuring bioburden, bioburden and its background, importance of bioburden and measures to cope with internationalization. 15 refs., 1 fig., 5 tabs.

  13. Present status and prospects of ultralow level radioactivity measurements (3). Environmental radioactivity monitoring in Japan

    International Nuclear Information System (INIS)

    The environmental radioactivity survey in Japan is explained. There are two kinds of surveys such as monitoring around nuclear facilities and the environmental radioactivity survey. On monitoring around the nuclear facilities, its objects, monitoring at ordinary times and in an emergency, the measurement items, radioactive materials analysis, evaluation and open to the public of monitoring results and guarantee of monitoring quality are reported. On environmental radioactivity survey in wide area, its objects, environmental radioactivity survey, working organizations, fallout measurement, concentration of radon in foods, neutron dose, natural radionuclide and nuclides in relation to reprocessing plants are measured. The measurement results are opened on Web site; http://www.kankyo-hoshano.go.jp/ and http://www.search.kankyo-hoshano.go.jp/. (S.Y.)

  14. Choline-stabilized orthosilicic acid supplementation as an adjunct to Calcium/Vitamin D3 stimulates markers of bone formation in osteopenic females: a randomized, placebo-controlled trial

    Directory of Open Access Journals (Sweden)

    Jugdaohsingh Ravin

    2008-06-01

    Full Text Available Abstract Background Mounting evidence supports a physiological role for silicon (Si as orthosilicic acid (OSA, Si(OH4 in bone formation. The effect of oral choline-stabilized orthosilicic acid (ch-OSA on markers of bone turnover and bone mineral density (BMD was investigated in a double-blind placebo-controlled trial. Methods Over 12-months, 136 women out of 184 randomized (T-score spine Results Overall, there was a trend for ch-OSA to confer some additional benefit to Ca and Vit D3 treatment, especially for markers of bone formation, but only the marker for type I collagen formation (PINP was significant at 12 months for the 6 and 12 mg Si dose (vs. placebo without a clear dose response effect. A trend for a dose-corresponding increase was observed in the bone resorption marker, collagen type I C-terminal telopeptide (CTX-I. Lumbar spine BMD did not change significantly. Post-hoc subgroup analysis (baseline T-score femur Conclusion Combined therapy of ch-OSA and Ca/Vit D3 had a potential beneficial effect on bone collagen compared to Ca/Vit D3 alone which suggests that this treatment is of potential use in osteoporosis. NTR 1029

  15. On the flow, thermal field and winds along the western continental shelf of India

    Digital Repository Service at National Institute of Oceanography (India)

    Antony, M.K.; Shenoi, S.S.C.

    of samplings, performance etc., are presented in Table 1. Between the deployment and the recovery of each mooring, hourly digital BT (Kankyo Keisoku System, Japan) and local wind observations (automatic recording system) were carried out from R.V. Gaveshani... series of temperature from the digital BT data. The temperature section during May shows that the isotherms slope up gently towards the coast. Though the density distribution essentially determines the geostrophic shear, Logged cross - Correlation...

  16. Application of vertical electrical sounding combined with induced polarization method in ground water exploration; IP koka wo koryoshita hiteikoho suichoku tansa no chikasui chosa eno tekiyo

    Energy Technology Data Exchange (ETDEWEB)

    Kondo, M.; Sakurada, H. [Sumiko Consultants Co. Ltd., Tokyo (Japan); Suzuki, T. [Hokkaido Development Bureau, Hokkaido Development Agency, Sapporo (Japan)

    1996-10-01

    For ground water exploration using vertical Schlumberger exploration method, measurement and analysis combined with induced polarization (IP) effect were conducted as trial. For the Schlumberger method, potential is measured at the center between potential electrodes during flow of dc current between current electrodes. In the case of vertical exploration, measurements are repeated with fixed potential electrodes by extending the distance between current electrodes. Ground water exploration was conducted using this method at Otaki village, Hokkaido. Geology of surveyed plateau consists of a basement of Pliocene tuffs and Quaternary Pleistocene sediments covering on the surface. For the results of analysis, four to seven beds were detected from the resistivity. The depth up to the lowest bed was between 25 and 85 m, the resistivity of each bed was between 9 and 8,000 ohm{times}m, and the polarizability was between 1 and 15 mV/V. Among these resistivity zones, it was judged that zones satisfying following three conditions correspond to coarse grain sediments saturated with ground water, and can be expected as aquifers; having resistivity ranging between 100 and 1,000 ohm{times}m, polarizability higher than 10 mV/V, and relatively large thickness. 11 refs., 6 figs.

  17. View of the LP gas supply/demand in Asia and a survey of the Middle East trend; Asia no LP gas jukyu tenbo to Chuto doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-09-01

    A study was made on the LP gas supply/demand in Asia including an outlook for 2000. Eleven countries in Asia including NIES countries, ASEAN countries, China and India have been continuing their rapid growth of economy and have rapidly been increasing their energy consumption. There, LP gas spreads as a home use fuel, and countries excluding some LP gas producing countries depend considerably upon the import from the Middle East. The LP gas consumption quantity is steadily increasing in China and India having huge population, etc., and dependence of LP gas is increasing upon LP gas producing countries of the Middle East. Nevertheless, in the Middle East, the domestic consumption of LP gas, mostly butane, is increasing. Namely, butane is used as raw material of MTBE, and LP gas as that of petroleum chemicals. The Middle East has a lot of plant projects of a sizable size in the future, which predicts that LP gas export from LP gas producing countries of the Middle East is decreasing. 2 refs., 62 figs., 57 tabs.

  18. Investigation on behavior of bacteria in reservoir for microbial enhanced oil recovery; Biseibutsuho (MEOR) no tameno yusonai saikin katsudo ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    Fujiwara, K.; Tanaka, S.; Otsuka, M.; Nakaya, K. [Kansai Research Institute, Kyoto (Japan). Lifescience Research Center; Maezumi, S.; Yazawa, N. [Japan National Oil Corp., Tokyo (Japan). Technology Research Center; Hong, C.; Chida, T.; Enomoto, H. [Tohoku University, Miyagi (Japan). Graduate School of Engineering

    2000-07-01

    Behavior of bacteria activated in reservoir though molasses-injection-tests, was investigated using the restriction fragment length polymorphism analysis with the polymerase chain reaction (PCR-RFLP) method, for elucidating potential bacteria to suppress in situ growth of microbes to be injected into the reservoir in the microbial enhanced oil recovery (MEOR) process. As a result, some bacteria belonging to Enterobacteriaceae species or their close relative species were grown predominantly in the reservoir, among bacteria inhibiting in the ground-water. The foregoing indicates that behavior of these bacteria in reservoir must be taken into consideration when giving a full account of behavior of microbes to be injected into the reservoir to put the MEOR process into operation. Potential proliferation using molasses to activate those bacteria was also estimated on the laboratory tests, to clarify the growth of microbes to be injected into the reservoir to operate the MEOR process. In consequence, it became clear that these bacteria have a potential growth exceeding 10{sup 8} CFU/ml, utilizing molasses. These facts indicated that microbes to be injected into the reservoir at the MEOR field tests are necessary to grow more excellently than bacteria inhabiting in the ground-water. In addition, as flow, the injection fluid is influenced by reservoir heterogeneity caused by injection of molasses, it was inferred that microbes to be injected into the reservoir at the MEOR field process are also necessary to grow more remarkably than bacteria inhabiting in the reservoir brine at high permeability zones and bacteria inhabiting in the reservoir rock. Furthermore, the results of the functional testing for MEOR conducted in the presence of bacteria activated through molasses-injection-tests indicated the importance of effective use of microbes to be injected, taking into account the characteristics of the reservoir and function for MEOR of those microbes. (author)

  19. Survey of the actual state of the coal related research and development in Japan. 11; Nippon ni okeru sekitan kanren kenkyu kaihatsu jittai chosa. 11

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    NEDO is surveying the actual state of the coal related research/development in Japan to supply information on the coal related research/development in Japan to IEA`s coal research project database. This book of fiscal 1997 version includes 338 subjects. The details described are name of research institute, the section in charge, address, name of country, telephone No., name of joint researcher, research theme, classification, outline of research, project No., name of researcher, sponsor, the budget appropriated, term of research, remarks, etc. The books of data collected from each country in surveys of the actual state of the coal related R and D and IEA`s coal researches which have been made so far are submitted for general viewing at NEDO Information Center. Also, a part of those can be accessible from the energy database of which NEDO Information Center is performing on-line service for user members

  20. Survey on weather changes associated with large-scale tree-planting. 2; Daikibo ryokuka ni tomonau kiko henka ni kansuru chosa. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    An investigational study was made for large-scale tree-planting aiming at CO2 fixation. Water resource and precipitation relating to tree-planting were determined from NASA data and arranged into the global distribution map. It was found that Australia and the Chinese continent are under the relatively favorable condition. As for the soil condition, nutrition resource is short in the desert and unused zone. From the vegetation data obtained from meteorological satellite NOAA, developed was a method for estimating net primary productivity of terrestrial ecosystem and obtained was a global distribution map for the amount of CO2 fixed under the present terrestrial vegetation. At the same time, areas which have great potentiality of tree-planting were selected from the map for estimating potentiality of the global tree-planting. To study the promotion of rainfall as a means of expanding the potential tree-planting area, the conventional meteorological and physical model was improved, and more realistic simulation was made possible. Also as to the water utilization technology, the modeling method was developed. As the area having a potentiality of expanding tree-planting, Australia (especially the west) was cited as the first candidate, and China the second candidate. 108 refs., 128 figs., 49 tabs.

  1. Survey on forest from the viewpoint of global environment. Part 2. Case study on afforestation; Shinrin no chikyu kankyoteki shiten kara no chosa. 2. Shokurin case study

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    In order to study the meaning and possibility of biomass energy, the imaginary cycle was proposed which is composed of fuel production through afforestation and energy conversion by power plant. Industrial afforestation was introduced into Southeast Indonesia where late recovery from forest loss by slash-and-burn method and deforestation is pointed out. Acacia Mangium was selected as a rapid growth tree. For operation of a 10MW class direct combustion thermal power plant of 21% in efficiency, biomass plantation of 9000ha and workers of 650 were necessary. The generated energy/input energy ratio of 3.71 showed a well energy balance. If this cycle is substituted for existing thermal power plants using fossil fuel, reduction of CO2 emission to 1/7-1/16 is possible. The power cost including no construction cost is estimated to be $0.0319/kWh. This cycle is thus promising as business because of the current power rate of $0.066/kWh in Indonesia. Although the profitability of this cycle is inferior to power generation using fossil fuel, this cycle will be valuable enough from a political standpoint in consideration of recovery and treatment of CO2. 31 refs., 26 figs., 47 tabs.

  2. Lightning observation on 77 KV transmission lines and survey on their failure modes. 77kV sodensen no kaminari kansoku to kosho yoso no chosa

    Energy Technology Data Exchange (ETDEWEB)

    Katsuragi, Y.; Kato, K.; Yokotani, M. (Chubu Electric Power Co. Inc., Nagoya (Japan))

    1991-11-01

    It was intended to investigate comprehensively lightning arrestors to prevent two-line power failure due to lightning on a transmission line and the optical ground wire (OPGW), which was found lately problematical due to damages. Lightning observations were carried out for three years on lightning damages to the entire 77 kV transmission lines which carry both two items. This paper summarizes the discussions done by Chubu Electric Power Company of Japan on its 77kV Mizunami-Oi line in the Gifu prefectural district. The lightning observing equipment is an air-cored Rogowskii coil, consisted of a personal computer linked to series of processors and CPU buses including a lightning surge memory to catch lightning behaviors. The power supply is a lithium battery with a capacity of 90 AH which is light in weight and portable. The observation cost is as low as (1/20) of the conventional method. The use of the equipment clarified the lightning modes, and the data analyses elucidated the effects of the lightning arrestor, as well as reduced the power failures and determined the correlation of lightnings with lightning current waveforms which cause damages to the OPGW. The utilization of the developed lightning surge memory, the lightning arrestor operation annunciator, and the ground failure indicator resulted in a great deal of success. 5 refs., 20 figs., 15 tabs.

  3. Comparative study on the characteristics of AC, DC servomotors and hydraulic motors; Dendoki to yuatsu motor no tokusei taihi ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Konno, Y. [Shibaura Inst. of Tech., Tokyo (Japan); Nakano, K.

    1997-07-15

    The relationship of the output torque and power rate of the electric motor with the inertial moment and the mass of the motor is investigated, and the validity of the study is verified in reference to the specifications given in catalogs. Based on the result of the investigation, comparison with the characteristics of the hydraulic motor is carried out. Paying attention particularly to smaller size, lighter weight and accelerating performance of the AC and DC servomotors and the hydraulic motor, the relation among the data, rated values and performance of motors by the assumption based on the performance principle is exhibited to clarify the comparison of the performance. It is made clear that the relationships hold good with the catalog data of actual machines not only for DC motors but also for AC motors. In addition, similar relationships are obtained for the hydraulic motor, and it is made clear that they agree with the result of the investigation. The tendency of distribution based on the relationships among data, rated values and performance of motors obtained by inference is given in this report. 18 refs., 7 figs., 1 tab.

  4. Fiscal 1998 research report on micro-particle control process technology; 1998 nendo micro ryushi seigyo process gijutsu no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For establishment of process technology realizing control of forms and structures of micro-particles on practical equipment, research was made on related elementary technologies and current technologies. The research was promoted aiming at synthesis of micro-particles from nanometer to micrometer in size and their application to functional materials, establishment of the methodology for correlating the microstructure and function of micro-particle materials with fabrication process, and establishment of a common-base technology system in chemical technology aiming at fabrication of functional materials. As for the common- base technology, to clarify its importance, research was made on the fabrication method and dispersion mechanism of nano- particles, particle arraying method by coating, device fabrication technique by coating, and one-step synthesis and coating of nano-particles. As for the project research, synthesis of monodispersed nano-particles at large production rates, fabrication of thin films and bulk materials by arraying and coating. (NEDO)

  5. Survey of the waste-fueled power generation introducing technology. Case study 1 (fiscal 1995); Haikibutsu hatsuden donyu gijutsu chosa nado. Case study no jisshi 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    In respect to a cleaning plant which A city is planning to construct, a study was conducted of a rough design of a system of the waste-fueled power plant aiming at high efficiency. The cleaning plant is planned to be constructed at the seashore reclaimed land, securing a wide site area, and a sufficient amount of combustible refuse is estimated to be collected. With the system, heightening of the turbine efficiency is possible using a sea water cooling type condenser, and the use of the bleeder turbine is possible. The results of the study in the stoker furnace and fluidized bed furnace are outlined as follows: In case of the stoker fired furnace, vapor conditions are 450degC and 60 ata, the output energy is 45,900 KW in high quality refuse of 1,050 t/d and 14,600 KW in low quality refuse of 1,050 t/d, and the power generating efficiency is 27.3% and 17.8%, respectively (two-stage condensing extraction turbine). In case of the fluidized bed furnace, vapor conditions are 450degC and 65 ata, the output energy is 45,800 KW in high quality refuse, and 15,600 KW in low quality refuse, and the power generating efficiency is 27.3% and 19.2%, respectively (five-stage condensing extraction turbine). 83 figs., 69 tabs.

  6. Investigational research on CO2 isolation technology in fiscal 1995; 1995 nendo nisanka tanso no kakuri gijutsu ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The paper studied present technical subjects and future study subjects of the CO2 isolation technology in order to clarify technical and social problems and the developmental subjects of the CO2 isolation technology and related technologies for separating/concentrating CO2 emitted in relation to quantity consumption of fossil fuel and storing it in ocean or underground. Main items for the study were: (1) investigational study of the technology of CO2 ocean storage, (2) investigational study of environmental effect assessment in storing CO2 in ocean, (3) investigational study of the technology of CO2 ocean storage, etc. Technologies required for the ocean isolation were arranged such as CO2 storage, injection, dispersion technique, CO2 behavior simulation, and the developmental subjects were extracted. Further, in the deep-sea bottom storage method, a simulation to calculate the range of PH effects was conducted presuming the specified amount of CO2 and applying known physical values, and evaluation of the CO2 ocean discharge/solution method was made. A method was also studied for experiments on water bacteria and benthos. 127 refs., 102 figs., 81 tabs.

  7. Fiscal 1998 joint promotion basic research report. Energy saving project for Achinsk refinery in Russia; 1998 nendo kyodo jisshi nado suishin kiso chosa. Roshia Achinsuku seiyujo shoene project

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For prevention of global warming by greenhouse effect gas, study was made on energy saving measures for Achinsk refinery in Russia. Achinsk refinery is a relatively new plant put into operation in 1983, however, because of no various equipment for use combustion heat effectively, its average thermal efficiency is as low as 60%-70%, resulting in fuel consumption more than necessary one. Based on the study result, the following remodeling designs were made: Improvement of a heat exchange efficiency by relocation of heat exchangers to reduce fuel consumption of a heating furnace as much as possible, conversion of an existing heating furnace based on an old design concept to an advanced one, installation of a waste heat recovery system including a preheating convection unit and air preheater, reinforcement of heating furnace wall insulator, installation of an optimum control system for furnace operation, and improvement of a fuel supply system efficiency. This design showed possible reduction of heating furnace load, and possible furnace thermal efficiency of 90%. (NEDO)

  8. Fracture inspection by BHTV logging through a vinyl chloride tube; Enbi pipe ga sonyusareta kosei deno BHTV ni yoru kiretsu chosa

    Energy Technology Data Exchange (ETDEWEB)

    Horikawa, H.; Okabe, T.; Takasugi, S. [GERD Geothermal Energy Research and Development Co. Ltd., Tokyo (Japan); Yamauchi, Y.; Imanishi, H. [Osaka Soil Test, Osaka (Japan)

    1997-05-27

    A borehole televiewer (BHTV) logging was conducted to investigate cracks in bored wells. The logging process shoots ultrasonic waves onto bore walls and utilizes reflection waves from the bore walls. If the bores are filled with muddy water, or the ultrasonic waves can pass through even if vinyl chloride tubes have been inserted after excavation, the state of the bore walls can be investigated in principle. Conventional optical scanners are, however, incapable of making this investigation. The BHTV logging can be used for identifying lithofacies from reflection intensities from bore walls (it depends on sound impedance of rocks), not to speak of finding cracks. As a result of making logging upon setting time windows from 105 to 145 {mu} sec in a bored well inserted with a vinyl chloride tube, cracks in the bore wall were identified clearly through the vinyl chloride tube. If the distance between the bore wall and the vinyl chloride tube becomes smaller, setting the time window becomes difficult, making reflection data acquisition more difficult. Impacts of decentering in the vinyl chloride tube on the data and the crack analysis result are small. The reflection intensity has decreased by about half as a result of having the circular vinyl chloride tube inserted. 5 refs., 9 figs., 1 tab.

  9. Investigation on research for improvement of automatic technology of underwater processing; Suichu netsukako gijutsu no kodoka jidoka ni kansuru kenkyu chosa

    Energy Technology Data Exchange (ETDEWEB)

    Katsumura, M.; Ogawa, Y.; Sumitomo, T.; Yoneda, S.; Tanaka, M.; Morita, T.; Sakakibara, M. [Shikoku National Industrial Research Inst., Kagawa (Japan)

    1997-01-20

    Improvement and automation of the underwater thermal technology were investigated as a part of the basic technology common to the ocean development. Elements of study required for the underwater technology development are the element common to that required in the atmospheric air and the element attributable to high pressure and submerged atmospheric environment. The element technologies required are those for welding, bonding, cutting, surface treatment, cleaning, inspection, etc. In underwater, much higher grade technology is required than on the ground in view of human work ability and safety. The technology development is thought to be toward to autonomy and intellectualization, but the complete change at once to autonomous task robot is difficult in view of the degree of technology maturation. There are a wet method (perfect submergence or local drying) and a dry method as the underwater welding method, but automation of the wet method has not advanced yet. The method is divided also by a difference in water depth to be applied. Depending upon the object, it is better to improve manual handling and to develop work support equipment. As subjects common to each processing technology, separately studied was each of technologies of heat source control, metallurgical phenomena in high temperature/pressure atmospheric air, and automation. 474 refs., 116 figs., 32 tabs.

  10. Study of effects of engine oil additives on the properties of fluorelastomers; Fusso gomu ni oyobosu engine yu tenkazai no eikyo chosa

    Energy Technology Data Exchange (ETDEWEB)

    Kurono, K.; Owaki, M.; Suzuki, Y.; Akiyama, K.; Shionoya, M. [Toyota Motor Corp., Aichi (Japan)

    1997-10-01

    Fluoroelastmers are well known for their resistance to heat and fluids and have become major material for crankcase oil sealers. On the other hand new additive formulations are developed for engine lubricants used for fuel economic gasoline engines. In this paper the effects of those additives on properties of fluoroelastmers are investigated. The results of the immersion tests of both test plaques and oil sealer products indicates that dithiocarbamates friction modifier have hardening effects on fluoroelastomers. The fluoroelastmer deterioration mechanism is presumed by analysis of elastmer samples after immersion in oil. 6 refs., 9 figs., 3 tabs.

  11. Development of the electromagnetic tomography system. Sensitivity study of anomalous body by model studies; EM tomography system no kaihatsu. Model kaiseki ni yoru ijotai no kando chosa kekka

    Energy Technology Data Exchange (ETDEWEB)

    Kumekawa, Y.; Miura, Y.; Takasugi, S. [Geothermal Energy Research and Development Co. Ltd., Tokyo (Japan); Arai, E. [Metal Mining Agency of Japan, Tokyo (Japan)

    1996-05-01

    An examination was made by a model analysis on sensitivity and the like against a resistive anomalous body, in connection with an electromagnetic tomography system with surface earthquake sources and underground receiver arrangements. A resistivity model was of a three-dimensional structure, and built with a 5 ohm{center_dot}m low resistivity anomalous body assembled in a 100 ohm{center_dot}m homogeneous medium. As a result of the examination, it was shown that the size limitation of an analyzable anomalous body was 50{times}50{times}20m at a frequency of 8 to 10kHz and that a system with high precision in a high frequency range was necessary. The examination of effects under a shallow anomalous body revealed, for example, that the fluctuation of a low frequency response was large compared with a deep anomalous body and that, where a second anomalous body existed under it, the effect also appeared with a surface earthquake source positioned in the opposite side from the anomalous body. The examination of effects under the three dimensional structure revealed, for example, that a remarkable change appeared in the data with the change in the inclined angle of the transmission line against the strike of the anomalous body. 4 refs., 7 figs.

  12. Application of geophysical methods to investigation of old castle, especially of the moat; Joshi no chosa ni okeru butsuri tansa no tekiyo (horiato no tansa)

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, A.; Karube, F.; Kobayashi, M.; Toge, M. [OYO Corp., Tokyo (Japan)

    1996-05-01

    An explanation is made about the application of geophysical methods to the investigation of the ruins of old castles especially of their moats. Techniques currently in use for exploration of the ruins of castles are mainly underground radar exploration and electric exploration. The underground radar method sends electromagnetic waves through the ground and receives the reflection for a high-precision exploration of the layers shallow in the ground. Therefore, this method is suitable for probing the ruins of castles relatively shallow in the flat land, hills, and mountains. The electric method (resistivity image method) do the probing by use of the two-electrode arrangement, performs inverse analysis on the basis of the obtained data for the determination of the underground resistivity distribution, and displays the distribution in an image easy to read. This method, when there is a great separation between the two electrodes, explores relatively deep into the ground. Thanks to this feature, this method is effective in probing relatively wide and deep ruins of moats, that is, the ruins of moats of castles built in later years, especially of those then filled with water. 2 refs., 5 figs.

  13. Research report for fiscal 1998. Promotion of activities implemented jointly etc. in China; 1998 nendo Chugoku ni okeru kyodo jisshi katsudo nado suishin chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The Kyoto Protocol allows some flexibility in the implementation of methods for achieving the goal, such as emission trading, activities implemented jointly (AIJ) among advanced countries, construction of clean development mechanisms (CDM) with developing countries, etc., and Japan intends to positively make use of them for the achievement of the goal. For China, who holds second place in the list of greenhouse gas emitting countries in the world, the promotion of CDM is quite important. With the situation taken into consideration, interaction was effected with Chinese officers and scientists of government agencies and academic institutes involved in environmental matters, and researches were conducted. Views and information were exchanged regarding environmental problems and, after on-site investigations, researches were conducted and suggestions were presented as to how AIJ and CDM should be. The suggestions covered Chinese policies toward AIJ and CDM, current state of AIJ projects in China and systems for their promotion, means for enhancing such projects, and discovery of candidates for AIJ and CDM project application. (NEDO)

  14. Survey on the possibility of international cooperation on production technology of biohydrogen; Bio suiso seizo gijutsu ni kakawaru kokusai kyoryoku kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    R and D on the production technology of hydrogen by biotechnology is one of the effective projects for worldwide energy supply technology and global environment protection technology in the 21st century. The research trend of various institutions promoting R and D on production technology of biohydrogen in the U.S.A. and other countries was surveyed together with the possibility of international cooperation. The production technology of biohydrogen is being watched over the world. Various researches are in promotion corresponding to environmental conditions as follows: search of not only photosynthetic bacteria but also such bacteria with hydrogen productivity as algae and anaerobic bacteria, and the gene engineering study for improving the hydrogen productivity of target microorganisms. All the institutions visited for this survey have great expectations in wide cooperative study in the future. On the possibility of international cooperation on the production technology of biohydrogen, the further precise survey should be promoted for developing more effective technologies based on the previous survey results. 156 refs., 10 tabs.

  15. Data book on new energy technology development in FY 1997. Photovoltaic (PV) power generation; Shin energy gijutsu kaihatsu kankei data shu sakusei chosa. Taiyoko hatsuden

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For the purpose of understanding the present status of photovoltaic power system (PVPS) and supporting its promotion, various data were collected. The significance of adopting PV power technology was specified for customers of various levels, such as nation, local communities, industries and individual households, to clarify the CO2 reduction effect and energy pay-back time. Data illustrate the solar cell production according to region, cell types, industries, applications, production value, and market price. Policies for PVPS in industrial countries were compared with those in Japan. Distribution of PVPS in various countries was compared with that in Japan in respect to installations and purposes of the introduction of PVPS. Financial aid programs such as subsidies, tax benefits and loans for the installation of PVPS in Japan were listed. The trend of PV-related budget of MITI was shown with every project`s description. Steps of introducing PVPS from plan to installation were depicted in the form of flow chart. Were shown measures sponsored by the government or local organizations to promote PVPS. Domestic and foreign firms related to PVPS including PV module suppliers, and PV installation contractors were listed

  16. Investigational study of optical function materials for two-dimensional data processing; Nijigen joho shoriyo hikari kino zairyo ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper investigated/studied `space light modulation materials,` `dynamic hologram/memory materials,` `optical waveguide path materials,` etc. which become key materials in the high speed two dimensional processing. As to electrooptical materials proposed in this investigational study, the external electric field and the electric charges generated make quality of molecules themselves directly change to memory strong/weak signals of light. Therefore, the response velocity becomes less than a millionth of that of the liquid crystal display, and high speed which is needed for realtime moving image processing is anticipated. Hologram includes the phase information in addition to information on light strength. Therefore, it is a large capacity record medium and at the same time a record medium which can read/write two dimensional information as it is. With optical fiber, images cannot be transmitted as they are. Light waveguide path materials are those that accumulate roles of mirror and lens in a sheet of the material and construct a system which is strong in vibration, as optical parts connecting among materials for two dimensional data processing. 273 refs., 107 figs., 17 tabs.

  17. Feasibility study on the demonstrative test on the hybrid mini hydroelectric power generation technology. 2; Hybrid gata mini suiryoku hatsuden gijutsu ni kakawaru jissho shiken kanosei chosa. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    A study was made for the purpose of electrification of unelectrified zones of the mountainous areas in developing countries using extremely small hydroelectric power facilities. The target for this project is a development of a micro hydroelectric power system with a size of about 5kW, which is estimated regarding that 1 village has 80 houses and each house needs electricity of 60W. In the study, the low-head system using a weir of irrigation channels in Subang pref. of West Java state was selected by the evaluation of access, stability of flow rate, natural conditions, etc. The hydroelectric power plant is of a flow-in method in which water is taken from the left bank and is injected/discharged to the downstream of the left bank. As the hybrid complementary power source, hybrid battery with a two-hour charging time at peak and a capacity of 3.5kWh was considered. When estimating the construction cost of the hybrid micro hydroelectric power system and equalizing by durable years, the operational cost per kW is 15 times higher than the benefits which local people receive. It was judged to be difficult to say that the micro hydroelectric power system is economically feasible. It was predicted that the financial profit during the demonstrative test is good, according to a trial calculation of income from power rates and the operational cost. 18 refs., 90 figs., 53 tabs.

  18. Survey on the construction of realization scenario of large-scale revegetation of arid regions; Daikibo ryokuka no jitsugenka scenario sakusei ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    In order to fix carbon dioxide as a measure to mitigate global warming, research of large-scale revegetation of arid regions has been conducted toward the ultimate goals of systematizing revegetation technologies centered on securing and using water resources, evaluating the feasibility of arid revegetation by extending the viewpoint to examine even rainfall increase by artificial means, and establishing a strategic program for large-scale revegetation. A trial revegetation feasibility map was made for a selected target region in Western Australia, and rough revegetation steps were formulated. Selection of proper region, introduction of technology, and planning were conducted by grasping environment of the target revegetation region. As a result, it was found that growth of plants is vigorous at the catchment areas due to the surface water transfer along the topography of surface in spite of poor rainfall. Obstruction of plant growth is partly caused by the corrosion of soil and accumulation of salt, but mainly caused by the shortage of water. Based on these data, ranking of proper regions was evaluated. When the technology is introduced in the region with A-rank, several times of water can be collected. 60 refs., 61 figs., 30 tabs.

  19. Investigation of nitrous oxide (N2O) abatement technologies. 2; Asanka chisso (N2O) no teigen taisaku ni kansuru chosa. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Emission amount of nitrous oxide (N2O) from anthropogenic sources is analyzed, and reduction effects by the abatement technologies are evaluated. The concentration of nitrous oxide in the atmosphere continues to increase and emissions from agricultural and ecosystem sources are drawing particular attention. For the emission of N2O in Japan, 8.28 Gg-N2O per year is emitted from fossil fuel combustion facilities, 6.95 from waste incineration facilities, 22.5 from transportation vehicles including automobiles, 26.7 from the chemical industry including establishments engaged in adipic acid production, 2.1 from sewage treatment facilities including septic tanks, 6.3 from farmland, and 7.1 from livestock excrement. For the N2O abatement technologies for different sources, fuel improvement, high temperature combustion, acceleration of reduction decomposition reaction, and development of catalysts are significant for the combustion technologies. In connection with N2O discharged in the process of adipic acid production, major businesses have internationally committed to up to 99% abatement of the N2O emissions by 1998. With regard to wastewater and sewage treatment facilities and septic tanks, improvement in COD/NO-N ratio, retention period, pH level, and reduction process is pointed out. 204 refs., 70 figs., 53 tabs.

  20. Investigations on measures to reduce nitrous oxide (N2O); Asanka chisso (N2O) no teigen taisaku ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Discussions were given on measures to reduce N2O as part of the measures to prevent global warming. Nitrous oxide has a long atmospheric lifetime of 150 years, and its greenhouse warming potential will increase by 310 times that of CO2 after 100 years. It can also be a cause of ozone layer destruction. Nitrous oxide is estimated to have influence of about 10% as compared with CO2 even under the present conditions. Discharge of N2O from manufacturing process of adipic acid is aimed to be eliminated totally by 1998. Improvement in efficiency of combustion of fossil fuels and wastes serves most effectively to reduce not only N2O but also CO2. Nitrous oxide generated in sewage treatment as in sewage purifier may be reduced if the batch process is turned into a continuous process, but assistance from policy side would be required for wider adoption of the process conversion. No environmental regulations are applicable to N2O, whereas a problem is present that the number of system installation would not grow because of economic reasons even if the system is feasible technically. Another problem is that the N2O reducing technology is in trade-off relation with other warming gases such as NOx and methane. Comprehensive technological evaluations aimed at optimization must be moved forward in the future. 236 refs., 102 figs., 78 tabs.

  1. Survey of the trend of technical development and industrial policies in Asian countries; Asia shokoku ni okeru gijutsu kaihatsu no doko to sangyo gijutsu seisaku ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    A sharp rise in industrial productivity in Asia countries indicates a rising level of R and D technology. Since Japan has not clearly grasped the R and D ability in these countries, it has not given appropriate personnel/material R and D support to them. Therefore, for the purpose of exactly grasping the R and D ability of Asian countries (Korea, Taiwan, the Philippines, Indonesia and India) and studying an effective and appropriate method for R and D cooperation, a survey was conducted of R and D potentials in Asia and R and D support policies of the countries. As a result of the survey, the following are taken up as items to be considered: promotion of exchanges between Tsukuba, etc. in Japan and research/university towns and science parks being constructed in lots of countries, participation of private companies in high-tech joint work in cooperation with Japan, sending information from Japan using internet, etc. and exact grasp of needs at partner side, cooperation given to new comers without asking for research results (use of OB researchers, etc.) 25 refs., 39 figs., 59 tabs.

  2. Evaluation of city buses installed diesel particulate filter systems on fleet test; Diesel particulate filter system wo tosaishita rosen bus no soko chosa

    Energy Technology Data Exchange (ETDEWEB)

    Sudo, H. [Japan Automobile Research Institute Inc., Tsukuba (Japan)

    1997-10-01

    An environmental air quality of suspended particulate matter is insufficient in the big city area. To reduce the particulate matter, improvement of engine and development of the Diesel Particulate Filter (DPF) system are carrying. The purpose of this report is to investigate a possibility of practical use of the city buses installed DPF systems. From March 1995, investigation for practical use of these DPF systems on a route buses was carried in regular service operation of the Tokyo and Yokohama Transportation Bureau. The investigation items are service situation, smoke density and preparation inspection. From the result for 2 years service operation, each DPF systems needed some failure correspondence. but these were not fatal problem on using the DPF system. Then the subject of relative to durability and reliability became clear, and the performance of a low particulate emission DPF system obtained the high value evaluation for users. 9 refs., 4 figs., 2 tabs.

  3. Questionnaire investigation for the earthquake in Honjo city and Yazawa city, Akita Prefecture; Jishin ni kansuru ishiki chosa (Akitaken Honjoshi oyobi Yuzawashi ni okeru anketo kara)

    Energy Technology Data Exchange (ETDEWEB)

    Nogoshi, M. [Akita University, Akita (Japan). College of Education; Kabutoya, S.

    1996-05-01

    Consciousness for the earthquake was investigated by questionnaire surveys made in Honjo City and Yuzawa City, Akita Pref. in October 1995 twelve years after the Nihonkai Chubu Earthquake (M=7.7) in May 1983. The survey was conducted in terms of 27 items including personality, memory, knowledge/interest, psychology/action, mental attitude/preparations, wishes for researchers and administration, etc. Also included were the items on the Great Hanshin-Awaji Earthquake and the earthquake blank areas. The number of distributed questionnaires and the recovery rate of them are 1500 and 79.2% in Honjo City, and 1700 and 84.7% in Yuzawa City. From the survey, it was found that people have a lot of knowledge of and high interest in the earthquake and well remember it, and a lot of people know of tsunami, liquefaction phenomena, and the earthquake blank area. Further, they are afraid of earthquakes and think of their actions to be taken in case of earthquake. However, most people are little prepared for earthquakes. Important future subjects were suggested for the study of disaster prevention measures. 13 figs.

  4. New energy technology development related database construction survey (wind power generation); Shin energy gijutsu kaihatsu kankei data shu sakusei chosa (furyoku hatsuden)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    To arrange systematic data relating to new energy, the latest published data relating to the wind energy conversion systems have been collected and arranged. For the overview of wind energy conversion system, wind turbines with horizontal axis and vertical axis, specification of wind turbine, and conceptual figure of wind energy conversion systems are illustrated. For the installation examples, introduction development of wind energy conversion systems in the world is described for Japan, the USA, Germany, Denmark, Spain, Sweden, India, and Belgium. For the relevant legislation and support plan, relevant legislation for the introduction of wind energy conversion in Japan, support plan in Japan, and support plans in foreign countries are described. Prices of wind turbines by wind turbine makers in the world, construction cost by Japanese makers, basic term, and subsidiary company and organization are shown

  5. Investigation on innovation of technology development by means of strategic energy intelligence; Energy senryakurontekina approach ni yoru gijutsu kaihatsu no kakushin ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    For the purpose of developing the future innovative energy technology, the paper described a strategic point of view. Effects of the energy issue are remarkable on the next generation and thereafter as seen in the finite of energy resource, global-scale environmental changes, the increasing energy demand, natural/social influences of large-scale technology development. If the technological development is going on in the same way as until now, there will appear limits. Relating to the strategies, to seek what energy should be among the strategies, it is necessary to consider not only global-scale problems but particular conditions in Japan (self-sufficiency, international cooperation, creativity, etc.) Also, wisdom and technique are necessary to attain it. Technological development in a wide sense plays a major role in the energy strategy. Technology innovation must be advanced according to the energy strategy. Integrating ideology into the development of energy technology and selecting therefrom developmental subjects which meet the purpose, required is the construction of the energy system with high flexibility and functionality. Looking at the conventional way of thinking from a different angle and posing a future pull plan, Japan should show leadership to the world. 20 refs., 25 figs., 8 tabs.

  6. Investigations during fiscal 1995 on capability of oceans to absorb and fix carbon dioxide; 1995 nendo kaiyo no nisanka tanso kyushu kotei noryoku no chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Investigations were given on capability of oceans to absorb and fix carbon dioxide as part of measures to prevent global warming. Carbon dioxide absorption and fixation in oceans relate to biological and chemical processes, whereas parameter dependence of each process was investigated. In relation to dissolution and dissociation of carbon dioxide into oceans, the parameter that governs exchange of carbon dioxide between atmosphere and ocean is partial pressure of carbon dioxide in surface sea water. This partial pressure is largely affected by water temperature, total carbonic acid and alkalinity. Particle-shaped organic carbon (detritus) is formed mainly by withering of photoplanktons. Formation of calcium carbonate due to activities of living organisms increases the carbon dioxide partial pressure. Fluxes of detritus are predominant among the whole precipitation flux in carbon circulation, which are more than two times the precipitation flux of photoplanktons. Particles are turned into inorganics by bacteria during the precipitation process. 29 refs., 21 figs., 6 tabs.

  7. CSAMT application in deep structural exploration at Akinomiya. Shingogen seigyo chijiki chidenryuho (CSAMT ho) no tekiyo. Akitaken Akinomiya chiiki ni okeru chinetsugen chosa

    Energy Technology Data Exchange (ETDEWEB)

    Motojima, Mutsumi; Kusunoki, Ken' ichiro.

    1988-11-01

    The controlled source antifrequency magnetotelluric method (CSAMT method) was applied to the site exploration at Akinomiya in Akita Prefecture as a part of research to improve geothermal exploration technique so as to utilize geothermal energy. CSAMT method is one of the measurement of underground resistivity with the equipment artificially transmitting electromagnetic waves of different frequencies to improve the accuracy of the exploration. Underground resistivity structure obtained form profile analysis for measured apparent resistivity indicated high resistivity zone corresponding to the lower basement rocks area and the boundary agreed with existing geological section. On the other hand, horizontal distribution map of apparent resistivity zone overlaps on the existing area of hot spring. CSAMT method is thought effective to survey the geological structure and to explore geothermal resources from the researched results. This method may be useful to select the site for underground structures along with the development of geothermal energy. 8 refs., 22 figs., 1 tab.

  8. Survey of pollution-resistant plants and their cultivating techniques; Osen busshitsu taisei shokubutsu to sono shokusai gijutsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The reduction of forests due to environmental pollution has been surveyed, to investigate the pollution-resistant plants and solid microorganisms. In Japan, the blight of needle-leaf trees (pine and momi fir) and of Japanese oak has occurred, and blight of some other trees, such as wild cherry trees, Japanese apricot trees, birch, Japanese cedar, cypress and bamboo, has been reported from various regions. In this article, plants reported to be resistant to pollutants are listed, and the physiological features of these plants are described. Furthermore, to develop pollution-resistant plants, reports relating to clarification of the mechanism of resistance development and the genes involved are reviewed. Microorganisms which symbioses for roots support these root functions. They also suppress the activity of pathogenic microorganisms and improve the environment around the roots, thus helping plants to grow normally. The roles played by symbiotic microorganisms and how to utilize these organisms are discussed. Their functions in coping with acid rain and heavy metal pollution, and how to utilize such functions are also discussed. 707 refs., 13 figs., 13 tabs.

  9. Data book on new energy technology development in FY 1997. Installations of photovoltaic (PV) power generation; Shin energy gijutsu kaihatsu kankei data shu sakusei chosa. Taiyoko hatsuden jireishu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The present survey places particular emphasis on the field of PV power generation systems, and intends to collect data on solar cell application products and PV power generation system installation cases, to classify them according to their usage and to compile a collection of case records including photographs. For the data collection, two formats have been adopted. A format for the solar cell-based products includes a picture of the product, and information on solar cell output and commercialization status. Another format for the installation of PV power systems includes a picture of the installation, and information on location, output level, system type, PV module type, owner, and date of installation. The application of solar cells was classified into 14 fields, i.e., consumer appliances, road and traffic, railroad, general industries, housing related, automobiles, agriculture, ocean development, disaster prevention and safety, amenity, developing countries, buildings, public facilities, and environment. A total of 241 valid cases have been collected. Overseas products and installation cases are often characterized by new applications and innovative design, and contain a lot of useful suggestions for promoting the spread of PV technology in Japan

  10. Measures for global environmental issues using information communication. Results of trial calculation of CO2 reduction reported by the Telecommunication Council; Joho tsushin wo katsuyoshita chikyu kankyo mondai eno taio. Denki tsushin shingikai toshin no CO2 sakugen shisan kekka

    Energy Technology Data Exchange (ETDEWEB)

    Fujiwara, T. [Ministry of Posts and Telecommunications, Tokyo (Japan)

    1998-11-01

    Telework is an effective work style using information communication without commutation, and ITS is an integrated traffic system such as advanced navigation. Effects of the CO2 emission reduction by these information communication systems were calculated as a trial. Reduction of CO2 4.06 million ton was obtained, which is equivalent to about 7% of the reduction target 56.5 million ton in Japan by 2010. For the items, were obtained 1.29 million ton (MT) by telework, 1.1 MT by ITS, 0.53 MT by the reduction of paper consumption/rejection using LAN, and 0.5 MT by the alternation of movements for international business using Internet (reduction of overseas official trips). In addition, were obtained 0.36 MT by the energy saving with enhanced efficiency of office environment using advanced information communication such as building management information systems, 0.25 MT by the electronic publication and newspaper for the reduction of paper consumption/rejection using electronic media such as CD-ROM, and 0.03 MT by the remote education and at-home education systems. The trial calculations were conducted only for these seven systems, and only for the direct effects using these systems. Accordingly, the result is only a part of the whole. These systems promote to realize a society with reduced environmental loads. 2 tabs.

  11. USW[center dot]33M-VS wind power turbine winning a 1993 environmental department prize of Discover Magazine. 1993 nendo DISCOVER kankyo bumonsho ni USW/33M-VS furyoku turbine

    Energy Technology Data Exchange (ETDEWEB)

    Ushiyama, M. (Waseda University, Tokyo (Japan))

    1993-12-01

    This paper introduces a variable speed wind power turbine developed jointly by EPRI and US Wind Power Corporation. This wind power turbine has a wind velocity responsive construction in which generated alternating current power has the frequency vary with change in the shaft rotation speed. The specified performance calls for a cut-in of 4 m/s and cut-out of 29 m/s, wind velocity variable. The blades are made of laminated fiberglass, and the rotor has a diameter of 33 m, rotation variable. The tower height is classified to 24 m, 30 m, and 42 m. The blade pitch is controlled by a linear hydraulic cylinder, and the turbine is controlled by a microprocessor. The wind turbine has a system interconnecting control and data collecting system. Two induction three-phase generators are used. EPRI has calculated its power generation cost at 5 cents/kWh if wind blows at an annual average velocity of 16 miles per hour. This is nearly equivalent to the cost at new power plants. US Wind Power Corporation has disassembled 22 experimental models that have been in operation to investigate wear in the machines. Its economy is evaluated comparable with that for fossil fuel technologies. 1 fig.

  12. 'Nikkei Global Environment Technology Prize' awarded to the joint research group on regeneration of tropical forest; Nettairin saisei kyodo kenkyu ga 'Nikkei chikyu kankyo gijutsusho' wo jusho

    Energy Technology Data Exchange (ETDEWEB)

    Watanabe, T. [Kansai Electric Power Co. Inc., Osaka (Japan)

    1998-11-10

    The tropical forest regeneration technology research group of Kansai Electric Power Company and Kansai Environment Center has been performing the research and development of tropical forest regeneration technology jointly with Indonesia since fiscal 1992. The group was awarded with the Global Environment Technology Prize from Nihon Keizai Shimbun, Inc. As a result of stringent examination on 97 applications, being two times as many as in usual years, the group received high evaluation on the originality, reality and possibility of proliferation of its research, and impacts given to the societies. Two other groups were also selected. The achievements were reported by the representative of the group in the award commemoration lecture at the global environment economist summit held by the Nikkei press the same day. Conventionally, afforestation done with considerable efforts has often been lost by forest fires and slash-and-burn farming, whereas the present research aims at establishing a comprehensive afforestation technology considering social and economic aspects, and CO2 fixation. As one of the choices of flexible measures as a result of the effect of forests having been recognized in COP3, frameworks for utilizing the mechanisms of joint implementation and clean resource development were introduced. Ever increasing expectations are placed on the achievements of the present research works. (NEDO)

  13. 1998 research cooperation project. Research cooperation on environment-compatible type water resource effective-utilization system; 1998 nendo kankyo taiogata mizushigen yuko riyo system ni kansuru kenkyu kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For the purpose of securing water stably and preventing water pollution in the Philippines, R and D were carried out on a wastewater treatment and water reclamation and reuse system which is easy to operate and maintain and low in cost through the research cooperation between the Philippine Industrial Technology Development Institute and Japan. According to the survey result of statistical data concerning water pollution load structure by industrial wastewater classified by the industry in the Philippines, enumerated are the food manufacturing industry, paper pulp manufacturing industry, and the textile dyeing industry as those greatly affecting water pollution in BOD exhaust and wastewater, etc. Consequently, with Ram Food Product Co. of vegetable processing and Solid Mill Co., of textile dyeing as plants to be studied, a wastewater treatment test was performed in a laboratory scale. From the result of the test, the pilot plant was basically designed to have 'anaerobic + aerobic treatment + tertiary treatment' for the treatment process, with an one-tank type UASB method used as the anaerobic treatment, with a sand filtration + activated charcoal treatment as the tertiary treatment, and with the cost effectiveness for water reuse set to be examined. (NEDO)

  14. Catalytic technology in the energy/environment field. Utilization of catalyst in coal pyrolysis and gasification processes; Energy kankyo bun`ya ni okeru shokubai gijutsu. Sekitan no netsubunkai oyobi gas ka ni okeru shokubai no riyo

    Energy Technology Data Exchange (ETDEWEB)

    Otsuka, Y. [Tohoku University, Institute for Chemical Reaction Science (Japan)

    1998-05-20

    This review article focuses on the utilization of several catalysts during coal pyrolysis and gasification. In situ or off line catalytic upgrading of volatile matters during pyrolysis of low rank coals is carried out in pressurized H2 with different reactors to produce BTX (benzene, toluene and xylene). When NiSO4 and Ni(OH)2 are used in the hydropyrolysis of Australian brown coal using an entrained bed reactor with two separated reaction zones, BTX yield reaches 18-23%. MS-13X zeolite and USY zeolite mixed with Al2O3 are effective for producing BTX with powder-particle fluidized bed and two-stage reactors, respectively. Catalytic gasification is described from a standpoint of direct production of SNG(CH4) from coal and steam. When K2CO3 and Ni are compared for this purpose, Ni catalyst is more suitable at low temperatures of 500-600degC, where CH4 formation is thermodynamically favorable. Fe and Ca catalysts can successfully be prepared from inexpensive raw materials and are rather active for steam gasification at {>=}700degC. The use of upgrading and gasification catalysts is discussed in terms of preparation, performance, life and recovery. 27 refs., 6 figs., 2 tabs.

  15. Adaptability of drowsiness level detection that measures blinks utilizing image processing to changes in the ambient light; Hikari kankyo no henka ni tekiosuru kao gazo shori ni yoru inemuri unten kenchi

    Energy Technology Data Exchange (ETDEWEB)

    Kaneda, M.; Obara, H.; Nasu, T. [Nissan Motor Co. Ltd, Tokyo (Japan)

    1997-10-01

    A drowsiness warning system that measures blinks utilizing image processing technology has a number of issues that need to be resolved. One issue is the adaptability of the system to changes in the ambient light environment in the actual vehicle interior. We have devised image processing software which is robust to changes in the ambient light. The drowsiness detection performance of the system was evaluated in laboratory tests and actual driving tests. It was found that the system can has a positive effect on detecting drowsiness level. 3 refs., 10 figs.

  16. Research program for environmentally-friendly coal utilization system. Demonstration project of desulfurization CWM plants; Kankyo chowagata sekitan riyo system donyu shien jigyo. Datsuryugata CWM setsubi ni kakawaru jissho jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-01

    To suppress the emission of environmental pollutants from coal utilization in China and to contribute to stable security of Japan`s energy, demonstration of clean coal technology and consolidation of diffusion base to be introduced into China have been promoted. A desulfurization CWM plant is described. It was planned, designed and constructed at Baiyang-he, Shandong Province from the end of 1995 to the end of 1996. CWM and limestone (desulfurizer) were crushed and mixed, to supply them into a power generation boiler (230 t/h). A ball mill was employed as a pulverizer. A high shear and contra-flow type intense mixer was employed as an agitator. A uniaxial screw pump was used as a slurry pump. Used CWM showed high agglomeration property, resulting in the disadvantaged fluidity. The solid concentration above 65% was difficult for the high concentration limestone mixing and crushing. The final CWM concentration was 65.5%, resulting in the decreased heating value. There were no problems in the desulfurization performance of limestone. Slugging was anticipated due to the drop of softening point of ash. Since residence time of desulfurizer was short, the initial reaction rate was significant. 30 figs., 22 tabs.

  17. Energy and power source mix in East Asia. Restrictions on resource, fund and environment and the future prospect; Higashi Asia no energy dengen mix. Shigen shikin kankyo no seiyaku to kongo no tenbo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-01

    In Asian countries, the economic growth rate is extremely higher as compared with the world average, and accordingly a large growth in energy supply/demand and electric power supply/demand is paid attention to. Besides, at users` side, a fear is the worsening of the environmental problem which is brought about by a rapid increase in energy consumption. At suppliers` side, introduction/expansion of a large amount of foreign funds for rapid promotion of power source development become necessary so that supplying facilities catch up with the growth in demand. Moreover, dependence of the supply upon outside the area is becoming higher, and problems in safety guarantee are also becoming prominent. As for energy/power source mix in East Asian countries, the stable supply is basically considered as most important, and economical efficiency is also important including competition conditions among energies and potential raising of investment in supplying facilities. It is no exaggeration to say that the increase in the rate of coal which occupies most of the primary energy supply/power source in East Asian countries depends upon the progress of environmental harmony technology such as clean coal technology. 39 figs., 132 tabs.

  18. Preventive measures against liquefaction in consideration of peripheral environment. Example of SAVE (Silent, Advanced Vibration-Erasing) composer method; Shuhen kankyo ni hairyoshita ekijoka taisaku koho. Seiteki shimekatame sunakui (SAVE composer) koho no sekorei

    Energy Technology Data Exchange (ETDEWEB)

    Sasaki, K.; Takahashi, Y.; Fukada, H. [Fudo Construction Co. Ltd., Tokyo (Japan)

    1998-09-25

    This paper presents the working machine, method and example of the newly developed SAVE composer method. The working machine of the SAVE composer method adopts a forced elevating equipment and rotating penetration equipment equipped with an auger motor for hydraulic forced penetration and elevation of a casing. The process of the SAVE composer method is composed of setting a casing at a proper position. charging material from a hopper to a casing, penetrating a casing up to a proper depth by the auger motor of the rotating penetration equipment, discharging material by extracting a casing, and re-penetrating a casing for compaction of discharged material. This method is free from noise and vibration because of no use of an excitor. This method was used for preventive measures against liquefaction at the coastal levee of Tsu-Matsuzaka harbor, Mie prefecture. As a result, nearly the same improvement effect as conventional SCP method, and considerable vibration reduction were confirmed. 3 refs., 12 figs., 1 tab.

  19. Design of environment-friendly and next generation-type conversion system for unused carbon resources by developing highly functional materials; Kokino zairyo kaihatsu ni yoru kankyo chowagata jisedai miriyo tanso shigen tenkan system no kochiku

    Energy Technology Data Exchange (ETDEWEB)

    Wakabayashi, K.; Morooka, S.; Arai, Y. [Kyushu University, Fukuoka (Japan). Faculty of Engineering; Sakanishi, K. [Kyushu University, Fukuoka (Japan). Institute of Advanced Material Study

    1997-02-01

    Studies are conducted for the development of now-unused kinds of fossil carbon resources, such as low rank coal and heavy gravity crude oil, into higher-value liquid fuel. In the preliminary treatment process, the fossil carbon resources are dried by use of supercritical carbon dioxide, when it is found that the resources are disintegrated and water is desorbed. In a low rank coal liquefaction process using the NiMo/KB (Kefjen Black) catalyst, more than 60% is converted into oil, which rate is improved by use of the dual-temperature liquefaction process. This catalyst may be recovered by separation utilizing specific gravity difference. As a low temperature gasification catalyst, the alkaline carbonate-carried carbon catalyst is very quick at the initial stage of reaction. The perovskite-carried alkaline carbonate catalyst is high in carbon oxidizing/activating efficiency at low temperatures. The silica film deposited on an alumina-coated support tube is excellent in selectivity and speed as a hydrogen separating film, and a carbonized polyimide film as a carbon dioxide separating film. For the supercritical phase adsorption/separation of chemicals not to be distilled easily, the NaY-type zeolite functions effectively. Pd/ZrO2 serving as a carbon monoxide conversion catalyst enables the recovery of more MeOH when Pd grains are smaller in diameter.

  20. Effects of the ratio of the time when wind is sensed on the comfort in a natural-ventilated room in summer. Kaki tsufu kankyo ni okeru kiryu kanchi jikanritsu no kaitekisei hyoka ni oyobosu eikyo

    Energy Technology Data Exchange (ETDEWEB)

    Umemiya, N. (Kyoto Univ., Kyoto (Japan)); Matsuura, K. (Setsunan Univ., Osaka (Japan))

    1992-10-30

    The number of winds sensed and the ratio of time sensing were introduced as sensory indexes and their relation with the comfort index in a natural ventilated room in summer was studied. A current of air is felt uncomfortable in an air conditioned room but it is felt especially comfortable in a natural-ventilated room in summer. A field investigation was made on the third floor of a building in Kyoto for 4 days in the beginning of September. The number of winds sensed in a certain time was counted and the ratio of time sensing to the certain time was measured. The wind sensed was reported dividing into 2 categories, i.e. 'wind sensing' and 'not sensing'. In this paper, the environment and temperature distribution in the room and the appropriateness of the wind sensing reports are discussed. Then the number of winds sensed and the ratio of time sensing are studied using the data obtained and it is concluded that they are effective as comfort indexes in a natural-ventilated room. 16 refs., 15 figs., 9 tabs.

  1. FY 1993-1999 report on all the results of the development of high performance industrial furnace; Koseino kogyoro no kaihatsu sogo seika hokokusho (1993 - 1999 nendo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Since an phenomenon was found out that NOx emission, which was thought to be increased, will be decreased by burning the high temperature preheated air jetting it at high speed (high temperature air combustion) in industrial furnace, there appeared a possibility of technical breakthrough for achieving the heightening of energy utilization efficiency and NOx reduction by exhaust heat recovery at the same time. This project aims at conducting full-scale experiments based on the basement technology including the theoretical elucidation of the combustion mechanism and high temperature air combustion by using various experimental facilities. Further, making full use of the most up-to-date analysis methods and constructing general-purpose database, the development is also aimed at of high performance industrial furnaces such as various heating furnace, heat treat furnace and melting furnace, with the assumption of prompt commercialization of the results of the development. As a result, targets were achieved such as energy saving of 30% or more, downsizing of 20% and a remarkable NOx reduction. Core technologies of this project are in-system limit heat recovery technology, high temperature air combustion technology, temperature field control technology (furnace temperature leveling technology) and high exergy heat transfer technology (furnace temperature heightening technology). (NEDO)

  2. Report on the cooperative study of technology to collect valuable resources in brine; Kansuichu no yuka shigen kaishu gijutsu ni kansuru kenkyu kyoryoku hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    The paper reported on the research, design, and evaluation on a system to recover by sedimentation magnesium from the brine in the salt manufacture by solar evaporation in Mexico, and a system to recover by adsorbent lithium, boron, etc. from the brine of the solar pond salt field in China. In the case of Mexico, an overall recovery system was developed, but in the evaluation of economy of the system, it cannot be said that the system is feasible even if assuming that the required fresh water can be secured. It was found out that the economical efficiency largely depends upon the cost of hydrated lime and the selling price of magnesia clinker. In the case of China, a plant for production of 500 tons/year of lithium carbonate was conceptually designed to evaluate the economical efficiency. As a result, the internal profitability of the plant is not so high, approximately 6%, though continuously profitable during the operation of 15 years. It was indicated that the project was not economically very efficient. 164 figs., 44 tabs.

  3. Fiscal 1997 report on the introductory study. Human behavior recognition evaluation technology; 1997 nendo sentan kenkyu hokokusho. Ningen kodo ninchi hyoka gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Importance of the human behavior technology was paid attention to to get true safety and comfortableness of life through adaptability of products/systems to all humans. In consideration of the social and technological background, the human behavior recognition evaluation technology avoids economic/social losses caused by accidents and troubles and also provides the safe life environment for living people including the aged. Further, the gist of the project was proposed to make it clear that it can give a course of making things from a viewpoint of development of products dealing with individuals (personal fit) and can give new added values and contribute to heightening of international competitiveness at the same time. Development is made of technology of dividing concrete behavior patterns into types and also accumulating them in usable forms at the time of product design and in emergency and of technology of measuring all the time information on human behaviors in daily life without restrictions and on site. Supporting technology is developed for making the most of behavior information of users for product design and in emergency. Effects of the spread are also estimated. 76 refs., 13 figs., 9 tabs.

  4. Fiscal 1998 'Plant Biotechnology in the 21st Century' workshop report; '21 seiki no shokubutsu biotechnology' workshop 1998 nendo seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The workshop was opened with the opening remarks by Yamada (President of Nara Institute of Science and Technology (NIST)), the overview of plant biotechnology in the 21st century from academia by Shinmyo (Professor of NIST), and the overview of such technology from Ministry of International Trade and Industry by Katao (Chief of Chemical Industry Division). Lectures and discussions of various topics were conducted for 2 days as follows. The effectiveness of a genomic DNA array method for obtaining the genes for switching genes according to daytime, nighttime, drying, salt, high temperature and low temperature for every plant. Current transfer technology of large DNA fragments into plant cell nuclei and chloroplast. Biological evaluation of the physiological functions and complex stress tolerance capacity transformed by transferring complex stress tolerance genes and useful genes for productivity improvement and value addition. Discussion was also held on the importance of a basic research for biotechnology in the 21st century. (NEDO)

  5. Achievement report for fiscal 1998. Mobile meal delivery robot for aged and disabled people; 1998 nendo seika hokokusho. Koreisha shogaishayo shokuji hanso jido robot system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    The following items were developed as the development of element technologies for a mobile meal delivery robot for aged and disabled people: a small-size manipulator, a moving mechanism for the robot, an environment perception unit (a built-in environment perception unit, a navigational environment perception unit, and a manipulation of environment perception section), an information display, navigation technology (a path planning section and a drive control section), and a remote supervisory control unit. The development of a total system realized generation of the basic robot path based on the food tray delivery data in a simulated environment, and a series of operation of food tray delivery and collection along the basic path. When the qualitative evaluation in the practical operation evaluation test and the quantitative evaluation in the simulated environment test are considered comprehensively, 'autonomy' and 'human friendliness' to coexist with human being were given good evaluation. The objective was achieved to realize a robot that has not existed in the past, and is received in general use. However, regarding its 'operability', the evaluation concluded that further speed increase is required for practical use at sites, which is the subject left as the future assignment. (NEDO)

  6. Japan`s New Sunshine Project. 1996 Annual Summary of Coal Liquefaction and Gasification; 1996 nendo new sunshine keikaku seika hokokusho gaiyoshu. Sekitan no ekika gasuka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-11-01

    In reference to the results of the research and development under the fiscal 1996 New Sunshine Project, a report was summed up on coal liquefaction and coal gasification. As to the R and D of coal liquefaction technology, researches were conducted on liquefaction characteristics and engineering properties by coal kind, catalysts for coal liquefaction, liquefaction reaction of coal and reformation utilization of the liquefied products, liquefaction reaction mechanism and coking mechanism, solubility of coal in solvent and catalytic reaction mechanism, solvent reaction mechanism by hydrogen donor solvent, etc. Concerning the R and D of coal gasification technology, made were the basic study of eco-technology adaptable gasification technology and the study of coal gasification enhancing technology. Further, as to the development of bituminous coal liquefaction technology, carried out were the study in pilot plants and the support study of pilot plants. Additionally, R and D were done of the basic technology of coal liquefaction such as upgrading technology and environmentally acceptable coal liquefaction technology, and of coal hydrogasification technology. 3 refs., 81 figs., 25 tabs.

  7. FY 1997 research and development of fusion domains. Part 1. Studies on cluster science; 1997 nendo seika hokokusho (yugo ryoiki kenkyu kaihatsu). 1. Cluster Science no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Studies were made on clusters which are thought to play important roles in status changes in substances (coagulation, crystallization and phase segregation) and chemical reactions (combustion, aqueous solution reaction and catalytic reaction). In the study of clusters by using infrared spectra, a method was developed to detect by using mass analyzer the cluster ion amount produced by dual resonance between resonantly enhanced multiphoton ionization (REMPI) and infrared lights. Fabrication of a Terahertz spectrometer was planned to enable high-resolution and high-accuracy observation on molecular clusters. Clusters consisting of silver atoms and ammonia molecules were successfully observed. A method was developed to investigate size dependence of cluster reactivity by using a Fourier converted ion cyclotron resonant mass analyzer. In addition, studies were conducted on clusters in liquids and aqueous solutions, clusters frozen in surface and matrix, and clusters stabilized in micro-space. 96 refs., 34 figs., 2 tabs.

  8. Report on a new energy vision establishment project for the Kaimon Township area in fiscal 1998; 1998 nendo Kaimonmachi chiiki shin energy vision sakutei gyomu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This paper reports on new energy vision establishment for the Kaimon Township area located in the skirts of Mt. Kaimon standing at the southernmost tip of the Japanese main island. The available new energy amount may be estimated for solar energy at 10.08 x 10{sup 6} kWh/year, solar heat at 5389 x 10{sup 6} kcal/year, wind power at 20.3 x 10{sup 6} kWh/year, wastes energy at 3111 x 10{sup 6} kcall/year, biomass forestry resources at 77 x 10{sup 6} kcal/year, and biomass stockbreeding resources at 27765 x 10{sup 6} kcal/year. Total energy available will be 30.38 x 10{sup 6} kWh/year for electric power generation, and 36342 x 10{sup 6} kcal/year for heat source. The area has more insolation than the national average, making potential high for solar energy power generation. Areas with annual average wind velocity of 5.5 m/s or higher are distributed widely, whereas wind power can correspond to 90% of the annual electric power consumed in the town. Geothermal temperatures are too low, making it difficult to be utilized for power generation, but could be used for heating hot spring water. Other energies, wastes and biomasses available in the town are not so great in quantity. The township will take the leadership in planning introduction of model type new energy facilities, and develop positively the enlightenment and proliferation activities for the time being. (NEDO)

  9. Fiscal 1997 report on the results of the international standardization R and D. Robot control system; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Robot seigyo system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    R and D of the robot control system was conducted in the following items: 1) integrated open control system, 2) remote control robot manipulation language, 3) human factor robot use built-in LAN system, 4) built-in actuator driver. In 1), there were some problems to be pointed out around the system, but the effectiveness was confirmed as system architecture of each verification item. In 2), development/design were made of RCML(R-Cube Manipulation Language) as a remote robot manipulation language, telecommunication protocol, and the experimental system, and the international standardization was targeted. In 3), the R and D was conducted of the realtime telecommunication protocol which clears the standards for the distributed control required for construction of human factor robot and the advanced realtime micro-controller, ULSI, which is the one that the protocol was made IC. In 4), an intelligent connector for built-in actuator was developed which enables saving of wiring in robot system and plug-in connection. 13 refs., 186 figs., 53 tabs.

  10. Achievement report on research and development of medical and welfare equipment technology. Optical tomographic imaging method; Iryo fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho. Hikari danso imaging system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-11-01

    The aim is to develop a method of processing oxygen concentration distribution in human organs into an image by computed tomography using near infrared rays capable of transmitting through living tissues. Since the photoabsorption spectra of hemoglobin etc. in blood vary according to the degree of their oxidation, an oxygen concentration level is determined by measuring the magnitude of the variation. In the imaging method named in the title, the object is irradiated with picosecond-level near infrared pulses from all directions successively, the pulses after transmission through the object are measured at all directions at a picosecond-level time resolution, and the distribution of pulse scattering and absorption characteristics are subjected to algorithmic calculation, the outcome is converted into oxygen concentration levels, and an image is obtained. A 64-channel time resolution measurement system is constructed, and is applied to living tissue models (phantoms) and animals, and an image is obtained and evaluated. On the basis of the result, a patient is examined for clinical evaluation, and an image reflecting the distribution of variations in hemoglobin oxygen concentration is obtained for the head of the adult patient. A spatial resolution of 1cm is achieved in case of a phantom 10cm in diameter. In the case of 64 channels, measurement takes approximately 20 minutes and mapping image data measurement takes approximately 7 minutes. (NEDO)

  11. Report on achievements in fiscal 1999 on research and development of the Welfare Techno-system (Shiga); 1999 nendo Welfare Techno system kenkyu kaihatsu (Shiga) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Research and development has been performed on a welfare device system that meets the regional needs at the Welfare Techno-house Shiga for the purpose of assisting autonomy in help requiring persons, assisting their social activities, and reducing burdens on helpers. This paper summarizes the achievements in fiscal 1999. In developing a walking action supporting appliance of muscular strength utilizing type, the relationship was investigated between motions of knee joints and muscular output when going up the stairs to perform discussions, experiments and measurements on timing for using auxiliary strength required when the knee joints are bent and stretched. In developing an auxiliary device to support spontaneous movements of lower leg handicapped persons, the standing up motion from the sitting position was analyzed, an action supporting device was designed for the method to help the transfer action, and for transfer actions in vertical and forward-backward directions, and fabrication and experiment were executed thereon. In developing a long-term action and physical condition monitoring system, discussions were given on methods to monitor body action amount and activities in daily life of the subjects, by receiving signals from an acceleration sensor fitted to the front of waist of a subject into a portable digital biological signal monitor. (NEDO)

  12. Report on achievements in fiscal 1999 on research and development of the Welfare Techno-system (Shizuoka); 1999 nendo Welfare Techno system kenkyu kaihatsu (Shizuoka) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Research and development has been performed at the Shizuoka Welfare Techno-house to assist entry into the welfare industry field of the local industries in the prefecture, such as for wood products, furniture and music instruments, and to provide products which take into consideration the society with more elderly people and less children. This paper summarizes the achievements in fiscal 1999. In developing barrier-free kitchens capable of handling change in bodily functions, a prototype kitchen was used to evaluate work load variation as a result of existence of a foot space under the kitchen table. In addition, a human simulation software was used to evaluate compatibility of humans with products. By utilizing these technical data, a system was arranged by which barrier-free kitchens can be commercialized by changing the specifications according to individual requirements. In developing a bed unit to prevent bedsore by using the multi-point pressure and fluctuation mechanism, the unit weight was reduced, and addition was made to such functions as controlling finger-pressing cycle and positions by electronic control. Development was made on a music instrument for rehabilitation by which anyone can play music by repetitively giving stimulation to human eyes and ears. (NEDO)

  13. FY 1997 research and development of fusion domains. Part 2. Studies on bionic design; 1997 nendo seika hokokusho (yugo ryoiki kenkyu kaihatsu). 1. Bionic design no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Studies were conducted on actuator function in bio materials, cells, structures, and living organisms, and on structuring a biological molecule machine. In the study on soft biological structures, biological compatibility of artificial glass bodies using ultra-polymeric PVA was found very high, raising expectation on feasibility of their practical use. Three-dimensional structure of glass bodies was made clear for the first time in the world. As a result of separating and purifying cells from a liver for the first time in the world, it was indicated that excellent proliferation performance and differentiation into cells are shown. With regard to hydroxyapatite in hard biological structure such as bones and teeth, single crystals were synthesized, and growth rate on the surface C was measured successfully. For molecular motors, studies are being performed on functions of twin-head structure in biological protein enzyme. In molecule structuring, studies were conducted on preparation of a hydrogenase LB membrane as an electric-hydrogen energy conversion element, and structuring of protein molecular structure using gene recombination. 69 refs., 37 figs., 8 tabs.

  14. Evaluation report on the development of polymeric material from renewable resource using biocatalyst; Seitai shokubai wo riyoshita saisei kano shigen kara no kobunshi sozai no kaihatsu hyoka hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The project aims to develop a biocatalyst-assisted synthesizing method for efficiently manufacturing sugar containing polymers and polylactic acids which generate less environmental impact. Methods were developed using the ALP-901 originating in actinomycetes for changing esterification-shy isopropylidene glucose into vinyladipic ester and for esterifying arbutin. A study was made of the polymerization of sugar ester monomers, and a polymer with a molecular weight of scores of thousands was obtained. The biodegradability of sugar containing polymers was confirmed. Using an enzyme, a polymer with a molecular weight of 1200 was obtained. Using a lipase derived from psudomonas cepacia, a polylactic acid was obtained from lactide. A high-function polylactic acid was obtained in a reaction between methyl lactate and divinyladipate. In a reaction between butanediol and lactide, several lactic oligomers different in molecular weight were synthesized, which were then brought into reaction with divinylcarboxylic acid in the presence of an enzyme for the production of polymerizable lactic oligomers. Similarly, polymerizable lactic oligomer derivatives were obtained from glucose and lactide. The oligomers and derivatives were brought into polymerization in the presence of a radical polymerization initiator for the production of polymeric gels, respectively. (NEDO)

  15. Report on the 1997 Coal Engineer Training Program General Course Training; 1997 nendo sekitan gijutsusha yosei jigyo ippan course kenshu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-01

    The paper reported training in the fiscal 1997 coal engineer training course. The training was made in a period from June 9 to November 12 in terms of actual training, English training, joint seminar, visits to the related facilities in Japan, overseas training, etc. for 10 engineers from mining companies, oil companies and electric power companies. In the actual training, the following lectures were given at International Resource University in Akita prefecture: coal exploration technology, coal situation of Australia, physical/chemical characteristics of coal and the application, coal preparation technology, coal situation in India, coal situation in the U.S., trend of general coal demand, coal situation in China, coal mining technology, actual surface mining technology, coal situation in Canada, commercial English, trend of raw coal demand, coal geology, environmental protection technology related to coal utilization, etc. Overseas training, which was divided into an Australia group and a Canada/America group, was conducted for about a month. Training in Indonesia was canceled because of a large scale forest fire which broke out immediately before the start. 88 figs., 52 tabs.

  16. Report on the general course training of the fiscal 1996 coal engineer training program; 1996 nendo sekitan gijutsusha yosei jigyo ippan course kenshu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-01

    The paper reported the general training of the fiscal 1996 coal engineer training program supported by NEDO. In Japan, where natural resource is poor, it is important to transfer from its petroleum dependence energy structure to the system for new energy development and dispersed energy supply. Coal resource is distributed widely in the world and is expected to spread in the future as a main substitute for petroleum. Worldwide attention is much paid to coal supply/demand and environmental problems, but the situation surrounding coal is not necessarily favorable. Under these conditions, Japan is a prominent coal importing country and is on the world-top level in terms of coal utilization technology. Japan has heavy responsibility and needs to play a leading role in adjusting and solving various problems on coal both domestically and internationally. Under the circumstances, 7 persons who are engaged in the coal related business and expected to be in future (3 from the mining relation and 4 from electric power comapanies) participated in the training this fiscal year and received the top-level training in Japan and overseas. 20 figs., 3 tabs.

  17. Coal engineer training project for fiscal 1999. Report on general course training; 1999 nendo sekitan gijutsusha yosei jigyo. Ippan course kenshu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-11-19

    This report was made on the general course training in the coal engineer training project implemented in fiscal 1999. The training was conducted from June 7 through November 19 with total 7 participating trainees from an electric power company, mining company, etc.. In the training, the lectures were given by speakers from domestic coal related companies, universities, laboratories and the like at the University of International Resources, a foundation, for about three weeks. An English training was carried out by three instructors at the same University for about eleven weeks with the purpose of acquiring the linguistic ability required for overseas coal development. The joint seminar was conducted in Tokyo by inviting lecturers, two from Australia and one each from Canada and Indonesia. The training by visiting the domestic coal related companies was such that the overseas lecturers and trainees visited Matsushima Mining Co., the Electric Power Development Company, NKK Corp and others. The overseas study and training were performed on a 35 day schedule by visiting energy-related institutions, mining companies, railway companies, coal loading/unloading harbors, and thermal power stations in Canada, the U.S., and Australia. (NEDO)

  18. Japan`s Sunshine Project. 1991 annual summary of coal liquefaction and gasification; 1991 nendo sunshine keikaku seika hokokusho gaiyoshu. Sekitan no ekika gas ka

    Energy Technology Data Exchange (ETDEWEB)

    1992-07-01

    Out of the research and development on the 1991 Sunshine Project, the results of coal liquefaction/gasification are reported. The basic research of coal liquefaction/gasification is conducted. The research plan for a 150 ton/day scale pilot plant (PP) is worked out for the development of bituminous coal liquefaction technology by NEDOL process. Data of PSU (Process Support Units) operation, especially, are studied. Concerning the data obtained through dismantling of the 50 ton/day PP in Australia which uses Australian Victoria coal due to completion of its operation and also obtained from its support research, they are reflected in the design of a demonstration plant, and the results are arranged for study. Research and development on refining technology of coal-derived liquid such as Illinois coal liquid and on application technology of its products are made. For the development of coal-use hydrogen production technology, conducted is the research of a high temperature gasification PP by entrained flow bed process which is the core of the coal gasification technology. Elementary study with a 2 ton/day furnace is made for the development of the entrained flow bed coal gasification combined cycle power generation system. Also conducted are PP construction, adjusting operation and the overall research operation.

  19. Report on the results of `the R and D of industrial technology information base arrangement`; `Sangyo gijutsu joho kiban seibi kenkyu kaihatsu` seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In relation to information processing in the open type research information networking, R and D were conducted to establish basic technologies such as grading-up, acceleration, enhancement of efficiency, diversification of application, promotion of usable data accumulation, etc. As to the R and D of software to promote sharing of research information, software was developed which can easily modify and renew management objects for users at research sites, etc., and the target was almost achieved. Concerning the R and D of information supply technology, an approach was presented whereby clients submit bids for each stream of the data requested and the admission decision is made so as to maximize gain of the session under network capacity constraints. Additionally, the R and D were made of software to construct an international information sharing system, a system for multi-lingual I/O, text manipulation and communication, and software for remote use of network based information for scientific computing. 138 refs., 125 figs., 33 tabs.

  20. Leading survey and research report for fiscal 1999. New technology based on functions involved in intracellular protein transport; 1999 nendo saibonai tanpakushitsu yuso kino riyo gijutsu kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    An intercellular transport technology (artificial manipulation of an intracellular protein transport system in eucaryotes) is studied for the accumulation of cytotoxic proteins, whose expression has so far been difficult, and activated proteins, which have avoided decomposition, in appropriate intracellular minute organs. The aim is to construct a system to allow foreign proteins high in productivity and quality to express themselves for production in eucaryotes. Basic surveys were conducted of the intracellular biological functions of single-membrane organelles (endoplasmic reticulum, peroxisome, vacuole/lysosome, and Golgi body), the molecular mechanism of protein transport to each organelle, and protein activation and quality control, and element technologies were extracted. For the development of novel pharmaceuticals making use of the intracellular protein transport technology, an activated protein production system was built and a search was made for transport activity impeding substances. Research tasks relative to the development of the new technologies were isolated, such as the visualization of intercellular transport. A survey was made of the market for pharmaceuticals, cosmetics, enzymes, and visualizing equipment (fluorescence microscope provided with new functions), etc. (NEDO)

  1. Achievement report for fiscal 1990 on research and development of electrically conductive polymeric materials; 1990 nendo dodensei kobunshi zairyo no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-03-01

    It is intended to realize new electrically conductive materials characterized by light weight, corrosion resistance and easy-to-process performance, and electrical and electronic materials having functions different from those of metallic conduction mechanism. Therefore, activities were performed to seek technologies for polymeric materials having conductivity greater than 10{sup 5} S/cm and being stable and easy to process. Activities were taken in the following six fields: (1) new hydrocarbon conjugate polymers, (2) excipient conjugate conductive materials, (3) technologies to form thin films of graphite synthesized at low temperatures, (4) conductive polymers of hetero aromatic system, (5) research and development of conductive materials of the hetero containing system and the {pi} conjugate system, and (6) comprehensive investigative research. In (1), thin films of polyacetylene and polyacene systems were formed, in (2), excipient hydrocarbon conjugate polymers and excipient graphite materials were developed, in (3), a high-accuracy process controlled graphite thin film forming technology was developed, in (4), the conductivity was enhanced by using high-order structural control and molecular design, and stability of the conductive polymers of complex annular conjugate system was enhanced, and in (5), conductive polymers of the hetero containing system and the {pi} conjugate system, and flexible graphite fibers were developed. (NEDO)

  2. 1998 Annual Study Report. Standardization for compatibility between home information devices; 1998 nendo seika hokokusho. Joho kaden kikikan no sogo setsuzokusei kakuho no tame no hyojunka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Wide-band POF covering Gbps as a Japan-made R and D fruit will be commercialized in the near future. It is very important to make an international standard specification for the transmission by the aid of the wide-band POF, which would be basically the standard for the future home networks. The efforts in this year were directed to finding the optimum parameters for widening the band, for which the necessary characteristics related to, e.g., transmission band and bending loss were measured and evaluated, and the specifications covering a certain range were established. The wide POF system is considered to provide the first chance of the optical transmission systems going into homes on a large scale, and the service conditions and regulations for use in homes have been comprehensively studied. These efforts have begun with collection of the measured data in consideration of operating optical elements represented by LD's, their peripheral circuits and the transmitter/receiver assemblies in which they are mounted at S400 or more. Each of the light emitting and receiving sections, including their peripheral circuits, were measured and evaluated, where they were mainly operated at a short wavelength of 650 nm, which is the same as that for the DVD. (NEDO)

  3. Fiscal 1998 research report on International Clean Energy Network using Hydrogen Conversion (WE-NET). Subtask 2. Research on promotion of international cooperation (research on standardization of hydrogen energy technologies); 1998 nendo suiso riyo kokusai clean energy system gijutsu (WE-NET) sub task. 2. Kokusai kyoryoku suishin no tame no chosa kento (suiso energy gijutsu hyojunka ni kansuru chosa kento)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report summarizes the fiscal 1998 research result on the basic research on standardization of hydrogen energy technologies, and ISO/TC197. As for the standardization, in relation to the hydrogen station in the WE-NET second phase research, the laws related to handling of gaseous hydrogen, and the basic issues on facility and safe handling were studied. As for ISO/TC197, the following draft standards were examined: Fuel supply system interface for liquid hydrogen vehicles, fuel tank for liquid hydrogen vehicles, container for liquid hydrogen transport, specification of hydrogen fuel, hydrogen fuel supply facility for air ports, gaseous hydrogen and hydrogen mixture fuel system for vehicles, gaseous hydrogen fuel connector for vehicles, gaseous hydrogen fuel tank for vehicles, and basic items for hydrogen system safety. Final examination of the fuel supply system interface for liquid hydrogen vehicles, and the specification of hydrogen fuel was finished, and these are scheduled to be registered for ISO. (NEDO)

  4. Investigation of the creation of functional surfaces and the recent development in related researches. 2. Investigation of the development of new isolation/refining systems in water system; Kokino hyomen no sosei to shintenkai no kenkyu doko chosa. 2. Suikei ni okeru atarashii bunri seisei system no kaihatsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    Propositions were made concerning new chromatography and membrane separation techniques wherein a command control material is used, the mobile phase is fixed upon water, and the fixed phase is caused to vary by external commands, and how to develop the said techniques into a project was discussed. New methods were also introduced, capable of separating water systems and, particularly, capable of separating and refining, without damaging their functions, bionic elements such as proteins, genes, and cells, which encouraged discussion on the future of the said project. As for command controlled materials, detailed investigations were conducted into materials responsive to physical stimulation such as light, electric field, magnetic field, or heat and materials responsive to PH and chemical or biochemical substances, and discussion was made on the structures and characters of the said materials. Concerning the manufacture of a command controlled surface, consideration centered particularly about the density and thickness of command controlled molecules to be introduced onto the surface. Furthermore, the current state and problems were discussed regarding chromatographic separation and refining of optical isomers, nucleic acids, physiologically active substances, peptides, cells, etc. 252 refs., 75 figs., 31 tabs.

  5. Fiscal 1995 survey of the base arrangement promotion for foreign coal import. Investigation on the policy of coal demand stabilization using low grade coal; 1995 nendo kaigaitan yunyu kiban sokushin chosa. Teihin`itan riyo ni yoru sekitan jukyu anteika hosaku ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The paper investigated the trend of and the needs for low grade coal utilization and the seeds of low grade coal utilization technology and studied usability of low grade coal in the future. Importance of low grade coal utilization was described in consideration of features of the Asia/Pacific area in the world coal market, and the trend of production/utilization of low grade coal was examined mostly in countries holding main low grade coals in the Asia/Pacific area. The trend of the technical development contributing to the low grade coal utilization was studied to make it contribute to the extraction of technologies which are regarded as effective in the Asia/Pacific area. A study was made of applicability of the low grade coal utilization technology corresponding to the needs for low grade coal utilization, and at the same time, a study was made of the effect on the coal supply/demand in the Asia/Pacific area in case the low grade coal utilization is promoted helped by the study. Focusing on technical cooperation relating to clean coal technology, a study was conducted of the trend of international cooperation in Japan and various overseas countries and the trend of new cooperation in private sectors, and a discussion was made on how Japan should act toward promotion of low grade coal utilization. 12 figs., 91 tabs.

  6. Report of FY 1997 on the international cooperation project. Survey of globalization of the effective energy resource utilization technology (development of high-accuracy acceleration measurement system); 1997 nendo kokusai kenkyu kyoryoku jigyo. Energy shigen yuko riyo gijutsu kenkyu kokusaika chosa (koseido kasokudo keisoku system no kaihatsu chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This report describes effectiveness of a system for measuring the acceleration and force in high accuracy by combining a laser interference meter and a vibration stand. A possibility of pressure sensitive paper to the impact force measurement in the collision examination is also described. The results obtained in FY 1997 are as follows. For the investigation of calibration system of acceleration and force sensor, one-dimensional interferometer system has been developed, which is standardized in ISO5347 accelerometer calibration. Thus, an interference fringe processing software has been made. Moreover, construction of a three-dimensional interferometer system has been started. For the characterization evaluation of pressure sensitive papers, it was succeeded in obtaining an elasticity wave pulse maximum about 1 msec by adopting the flight body made of resin. As a result, evaluation of the force sensor in the frequency area has become possible. To calculate the displacement of a body structural material in the collision experiment, an acceleration sensor has been made for trial purposes. For the international research cooperation, the working plan of a joint research with US Texas Christian University has been concluded. 11 refs., 73 figs., 23 tabs.

  7. Test and survey on a next generation coal liquefying catalyst. Coal molecule scientific test and survey as the base for commercializing the coal liquefying technology; Jisedai sekitan ekika shokubai shiken chosa. Sekitan ekika gijutsu shogyoka kiban to shite no sekitan bunshi kagaku shiken chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The test and survey on a next generation coal liquefying catalyst present a new proposal to raise catalytic activity in coal liquefaction, and perform demonstration experiments in a laboratory scale to search for possibility of developing a new coal liquefying catalyst from various viewpoints. To explain, discussions were given on the catalyst to perform the followings: liquefaction under extremely mild conditions by using ultra strong acids not limited only to metals; ion exchange method and swell carrying method to raise catalyst dispersion very highly, enhance the catalytic activity, and reduce the amount of catalyst to be used; mechanism of producing catalyst activating species to further enhance the activity of iron catalysts; and pursuit of morphological change in the activating species. The coal molecule scientific test and survey as the base for commercializing the coal liquefying technology performed the studies on the following items: pretreatment of coal that can realize reduction of coal liquefaction cost; configuration of the liquefaction reaction, liquefying catalysts, hydrocarbon gas generating mechanism, status of catalysts after liquefaction reaction, and reduction in gas purification cost by using gas separating membranes. Future possibilities were further searched through frank and constructive opinion exchanges among the committee members. (NEDO)

  8. Choline-stabilized orthosilicic acid supplementation as an adjunct to Calcium/Vitamin D3 stimulates markers of bone formation in osteopenic females: a randomized, placebo-controlled trial

    OpenAIRE

    Jugdaohsingh Ravin; Swaminathan Rami; Demeester Nathalie; Bevan Liisa; Clement Gail; Anderson Simon H; Calomme Mario R; Spector Tim D; Berghe Dirk; Powell Jonathan J

    2008-01-01

    Abstract Background Mounting evidence supports a physiological role for silicon (Si) as orthosilicic acid (OSA, Si(OH)4) in bone formation. The effect of oral choline-stabilized orthosilicic acid (ch-OSA) on markers of bone turnover and bone mineral density (BMD) was investigated in a double-blind placebo-controlled trial. Methods Over 12-months, 136 women out of 184 randomized (T-score spine < -1.5) completed the study and received, daily, 1000 mg Ca and 20 μg cholecalciferol (Vit D3) and th...

  9. Report for fiscal 1998 on Simple Operation Type CAD/CAM System Development through International Cooperation. Report on the achievements of counterparts overseas; 1998 nendo 'kan'i sosagata denshi sekkei seian shien system no kaihatsu ni kansuru kenkyu kyoryoku' ni kansuru hokokusho. Kaigai counter part seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Concerning the subject matter, achievements of China, Indonesia, Malaysia, Singapore, and Thailand are reported. In China, a technical data transfer process is under development, designed to serve between CAD (computer-aided design)/CAM (computer-aided manufacturing) packages of different file formats. In Indonesia, WG1 activities are being conducted with the assistance of Toyota Motor Corporation, and WG3 activities with the assistance of Wacoal Corporation, Japan. In Malaysia, designing, development, and tests are under way for prototype systems of an electronic catalog, direct link to CAD/CAM, transfer and sharing of electronic manufacturing data, etc., all to be completed by March 1999. In Singapore, an electronic parts library is compiled, and a verification test is conducted involving response time, download time, etc. In Thailand, development is under way of an engineering browser, automobile industry-oriented WEB-based information center, etc. (NEDO)

  10. Report on the results of efforts for fiscal 1997. Development of technologies for creating high-quality crystal materials for low-loss power control devices; 1997 nendo seika hokokusho. Teisonshitsu denryoku seigyo soshiyo kohinshitsu kessho zairyo sosei gijutsu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Basic technologies are developed for the manufacture of high-quality crystal materials large in diameter and homogeneous in property which will allow power control semiconductor devices to grow more sophisticated in function and to be lower in the loss they suffer. Physical properties of molten semiconductor and the like are measured accurately, which include surface tension, density, viscosity, electric conductivity, thermal conductivity, emissivity, diffusion coefficient, vapor pressure, heat capacity, contact angle, and solid solution equilibrium distribution coefficient. In computer-aided simulation, as in the previous year, simulation codes are developed for the analysis of flow, temperature distribution, and diffusion behavior in the gas phase; simulation codes are developed for the analysis of 3D unsteady thermal flows in the melt; and a main program is developed which governs experimental calculations. As for experiments in model Czochralski crucibles, small crucible are used in which experiments are conducted in the temperature range of normal to 200degC for the acquisition of experimental data for verification. Measured by use of the model crucibles are the temperature distribution in the bath, the surface flow speeds, and the flows inside the melt. 140 refs., 153 figs., 10 tabs.

  11. FY 2001 report on the results of the development of the hydrothermal utilization power plant, etc. Development of collecting technology for deep geothermal resources (Development of production technology for deep geothermal resources); 1992 - 2001 nessui riyo hatsuden plant tou kaihatsu sokatsu seika hokokusho. Shinbu chinetsu shigen saishu gijutsu no kaihatsu - Shinbu chinetsu shigen seisan gijutsu no kaihatsu (2001 nendo seika hokokusho bessatsu shiryo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-03-01

    For making effective/economical collection of deep geothermal resources, development was made from FY 1991 to FY 2001 of the 'drilling technology for deep geothermal resources' and 'production technology for deep geothermal resources,' and the results were summarized. As to the development of logging technology, the PTSD logging system was developed which can measure temperature/pressure/flow velocity/fluid density in geothermal well under the environment of temperature of 400 degrees C. Concerning the development of monitoring technology, development was made of the PT monitoring system that can make the long-term continuous measuring of temperature/pressure in deep geothermal observation well under the environment of temperature of 400 degrees C and of the C monitoring system that samples geothermal fluids at regular intervals to grasp changes in chemical component. Relating to the development of high temperature tracer monitoring technology, the following were conducted: extraction of high temperature tracer agent that can be used in geothermal reservoirs under the environment of temperature of 300 degrees C, development of simulator, and establishment of how to put tracer agent into the reservoir and how to analyze tracer agent. Further, the R and D were made of scale monitoring technology and scale prevention/removal technology. (NEDO)

  12. [A case of interstitial pneumonia exacerbated by kampo-induced pneumonitis].

    Science.gov (United States)

    Suzuki, Kazuo; Kinebuchi, Shinichi; Sugiyama, Kentaro; Satoh, Hiroshi; Tango, Masuo; Moriyama, Hirochi; Terada, Masaki; Ooi, Hidemi; Hasegawa, Takashi; Igarashi, Kenichi; Satoh, Makoto; Suzuki, Eiichi; Gejyo, Fumitake

    2002-07-01

    A 65-year-old woman who had complained of non-productive cough since May 1998 visited our hospital on November 5, 2000. She had been treated at another hospital with Kampo (Chinese herbal medicine), including Moku-boui-to, Bakumon-do-to, and Saiko-keishi-kankyo-to for chronic non-productive cough. Chest radiographs and CT films showed the reticular shadows that had been present in 1998, in both lower lung fields, and also demonstrated new reticular shadows in the right upper lung field and left lingular segment. Laboratory data revealed hypoxemia and pulmonary function tests revealed restrictive ventilatory disturbance, so she was admitted to our hospital on November 9, 2000. After the cessation of Kampo treatment, her symptoms disappeared, and the hypoxemia, restrictive disturbance, and reticular shadows in the chest radiograph gradually improved. Video-assisted lung biopsy specimens showed thickened alveolar walls with lymphocyte and eosinophil infiltration. A leukocyte migration test was positive for Moku-boui-to, Bakumon-do-to, and weakly positive for Saiko-keishi-kankyo-to. Although no challenge test for Kampo was performed, we diagnosed this case as interstitial pneumonia exacerbated Kampo-induced pneumonitis based on these clinical, laboratory and histological findings. PMID:12382427

  13. Research report for fiscal 1988. Basic research for the promotion of joint implementation etc. (plan for using combined cycle at Konakovo Power Station, Russia); 1998 nendo kyodo jisshi nado suishin kiso chosa. Roshia renpo KONAKOVO hatsudensho combined cycle ka keikaku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    On the basis of Kyoto Protocol-provided flexible measures such as joint implementation and clean development mechanisms, a study is conducted for introducing combined cycle into Konakovo Power Plant of Russia currently equipped with antiquated eight 300MW power plants constructed in the 1960's for which early renovation is necessary. The power station is an important power source connecting to the Moscow-Petersburg main. The gas turbine combined facilities to be newly installed will comprise 250MW-class state-of-the-art gas turbines arranged in four blocks, capable of a total output of 1600MW at a thermal efficiency of 58% (with simultaneous supply of heat). Four units capable of 1200MW out of the existing units will stay in operation for load adjusting. Since the price of power is set low under government control, the accounting capital/internal return rate is as low as 2.3%. The rate recalculated under the financing conditions of special yen credit for environmental protection, however, is as high as 19%, so high as to make the renovation an economically feasible project. It is expected that there will be an annual CO2 reduction of 2.3-million tons or a reduction of 57.50-million tons in 25 years (the life span of the new facilities). The renovation may be a joint implementation project to which both Japan and Russia will attach the highest priority. (NEDO)

  14. International exchange project for the engineer exchange project (in coal mine technology area) in fiscal 1998. Pre-survey in Europe; 1998 nendo gijutsusha koryu jigyo (tanko gijutsu bun'ya) kokusai koryu jigyo. Jizen chosa (Oshu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This survey in Europe surveyed the current status of the coal industry, supporting directions and policies of governments on the coal industry, and summarized the information thereof. The survey included movements in policies and activities in transfer of technologies to overseas countries by governments and corporations of different countries, and the current status of the coal technology training project. The survey covered Britain and Germany. The British coal industry is facing a serious difficulty because the electric power industry being the major coal purchaser has changes its sourcing to natural gas. In addition, the open-cut mining which has been considered high in productivity has no further hope of big progress due to regulations in the environmental aspects. However, as a result of having performed positively research and development on production cost reduction, the production efficiency has grown excellently. Using this situation as the base, positive advancement into overseas countries is being carried out. The German coal industry has, in spite of having reduced the production size and the number of coal mines, shifted coal purchasers to electric power generation and steel making areas, and its quality and supply capability stand equivalent to those of imported coals. (NEDO)

  15. Research on energy conservation in petrochemical and steelmaking industries in a developing country (India); Hatten tojokoku (Indo) ni okeru sekiyu kagaku kogyo tekkogyo no energy shohi koritsuka ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Current state of energy conservation in petrochemical and steelmaking industries in India was surveyed to estimate energy consumption and demand, and discuss possible international cooperation. Recently India has grown rapidly, and its growth rate of energy consumption is higher than a rise in GDP. In order to examine the current state of energy conservation in India, major energy consumption levels in India was surveyed together with production outputs of steelmaking, oil refining and petrochemical industries. Energy consumption and the potential of current energy-saving programs were also surveyed in modern factories. As a result, for energy conservation in petrochemical and steelmaking industries in India, the following were pointed out: improvement of operation conditions in current facilities, improvement of management systems in current facilities such as introduction of computers, and modification of production processes. Improvement of energy efficiency by introducing advanced technologies from developed countries such as Japan was essential. 37 figs., 45 tabs.

  16. Studies on transmission property changes of optical fibers inside an OPGW heated by conducting or discharge currents; OPGW tsuden/hoden kanetsu ni yoru hikari denso tokusei hendo no kento (sodensen kanshi hoho no chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    Yamashita, I.; Seikai, S.; Takenaka, T. [Kansai Elecatric Power Co. Inc., Osaka (Japan)

    1999-09-30

    Temperature of OPGW's is known to increase due to thunderbolt. Therefore, the measurement of transmission characteristic changes of optical fibers inside the OPGW is seems to be useful method to supervise the electric power sending systems. Candidates for the detectable characteristics are optical loss, Brilloum frequency shift and Raman scattering power because distribution of these changes can be measured by OTDR techniques. In this experiments, those properties are investigated using a high voltage supply system at the Central Research Institute of Electric Power Industry. A test OPGW containing 24 fibers including 22 single-mode and 2 multi-mode fibers is installed with a span length of 20m. In the current conducting test, the OPGW is heated up to 250 degree C through three times conduction of 6kA with each duration time of 600 or 700ms. In the discharge current test, electric charge of 50C(coulomb), 100C and 200C with 20ms duration are applied. The results of the experiments are summarized as follows. The optical loss change is negligible small except for the fiber brake case and the Brilloum frequency shift is not always suitable because the sensitivity is small. The temperature measurement by the Raman scattering observation using the multi-mode fibers is found to have enough sensitivity and accuracy. However, residual problem is to increase the sensitivity of it for single mode fibers. (author)

  17. International Clean Energy System Using Hydrogen Conversion (WE-NET). subtask 2. Research study on promotion of international cooperation; Suiso riyo kokusai clean energy system gijutsu (WE-NET). subtask 2. Kokusai kyoryoku suishin no tame no chosa kento

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This paper describes the research result on promotion of international cooperation in the WE-NET project in fiscal 1996. The WE-NET project aims at development of the total system for hydrogen production, transport, storage and utilization, and construction of the earth-friendly innovative global clean energy network integrating elemental technologies. Since the standpoint is different between latent resource supplying countries and technology supplying countries, the WE-NET project should be constantly promoted under international understanding and cooperation. The committee distributed the annual summary report prepared by NEDO to overseas organizations, and made positive PR activities in the 11th World Conference and others. The committee made the evaluation on the improvement effect of air pollution by introducing a hydrogen vehicle in combination with Stanford University, and preparation of PR video tapes for hydrogen energy. Preliminary arrangement of Internet home pages, establishment of a long-term vision for international cooperation, and proposal toward the practical WE-NET are also made. 9 figs., 13 tabs.

  18. Application of magnetotelluric method to hydrocarbon exploration. Case study of MT survey in Yurihara oil and gas field, Akita prefecture; MT ho no kokunai sekiyu tanko eno tekiyo. Akitaken Yurihara chiiki ni okeru jikken chosa kekka

    Energy Technology Data Exchange (ETDEWEB)

    Mitsuhata, Y.; Matsuo, K.; Ishikawa, H.; Tanaka, H.; Nakagami, K. [Japan National Oil Corp., Tokyo (Japan). Technology Research Center

    1996-10-01

    The experiment and survey were carried out to verify the effectiveness and limitation of MT method. The previous seismic reflection method is unsuitable for steep terrain and over-folded complicated geological structure. In such difficult areas, application of MT method is increasing as complement or substitution for the reflection method. However, the evaluation of resistivity structure interpretation for every area is slightly difficult because of lack of data, poor quality of data, and no verification data at boreholes. Consequently, the survey was again carried out in well-known Yurihara oil and gas field, Akita prefecture whose geological structure has been surveyed in detail at boreholes, by adding new 32 sites, 22 sites on the south side and 10 sites on the north side of the measuring line extending from east to west. As a result, it was clarified that the lower high-resistivity layer found by MT method is equal to the Nishikurosawa basaltic layer, and basalt extends to the west in the north area. This result can`t be simply compared with the previous geological profile. 8 refs., 8 figs.

  19. Development of a vehicle capable of traveling on soft ground. Its application to investigation, survey and management of soft ground; Nanjakuchi sokosha no kaihatsu. Nanjakuchi deno chosa sokuryo kanri eno tekiyo

    Energy Technology Data Exchange (ETDEWEB)

    Kimura, R.; Yano, H. [Ministry of Construction, Tokyo (Japan)

    1998-07-25

    An experimental vehicle is built and tested, which utilizes hovercraft technology, capable of travelling on a soft ground surface and therefore usable in reclamation work. When the ground is soft and viscous, merely increasing the vehicle driving force will futilely add to the vehicle weight, and this causes an adverse effect with the vehicle sinking deeper into the ground and the ground presenting higher resistance. In an effort to decrease the weight and resistance, a vehicle is built, capable of levitating itself by use of hovercraft technology and provided with retractable tracks and wheels for travelling. The targets are mostly attained in the test run, as far as speeds (5.5km/h at the maximum across a muddy ground section) and trekking across ground including an undulated surface are concerned, although the levitation level is found to be somewhat lower than the design value. Operating across a hard ground surface with the body elevated, the vehicle exhibits a higher performance in speed and drivability when the hovercraft effect is utilized. When travelling on the hovercraft effect, the frictional resistance of the skirt decreases as the vehicle moves from a hard surface section into a soft surface section, and this allows the vehicle to run more smoothly at higher speeds. 1 refs., 6 figs.

  20. Investigation on brittle fracture of high bridge pier by Hyogoken-Nanbu earthquake; Hyogoken nanbu jishin ni yori chukokan ramen kyokyaku ni shojita zeisei hakai o gen`in chosa

    Energy Technology Data Exchange (ETDEWEB)

    Eto, O.; Mihara, T. [Kubota Corp., Osaka (Japan); Miki, C. [Tokyo Institute of Technology, Tokyo (Japan). Faculty of Engineering

    1998-04-21

    During the Hyogoken-nanbu earthquake, Ikuta Bridge for railway was not broken but severely damaged. The steel bridge piers were fractured. The Ikuta Bridge was constructed with two steel rigid frames at its ends and two reinforced concrete rigid frames at its center with a three-span 50 m long steel girder in 1967. During the earthquake, the steel pier at the western end was moved in 1 m toward north, and the movable support and pier at the western end were fractured. At the eastern end, the fixed support and the pier were not damaged, but the RC pier of the support base was fractured. To clarify the cause of damages and the fracture mechanism, dynamic response analysis, static elasto-plastic analysis, observations of fracture faces, and material tests were carried out. As a result, it was considered that the brittle fracture of centrifugal cast steel bridge piers of Ikuta Bridge was caused by the horizontal impact exceeding the bearing force for fractures over the piers after the initial fracture of movable support at the western end. From the observations of fracture faces, peeling tests of paints, and hardness tests, it was suggested that the fractures of cast steel piers were initially generated at the yield stress level. 3 refs., 16 figs., 6 tabs.

  1. Investigation studies on renewable energy resources in Asia. Wind and solar energies in Vietnam, Malaysia; Asia ni okeru saiseigata shizen energy kaihatsu shuho to fusonryo ni kansuru chosa kenkyu. Vietnam oyobi Malaysia ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Shimizu, Y.; Takada, M.; Ono, H. [Mie University, Mie (Japan). Faculty of Engineering; Loc, N.; Khan, N. [Hanoi Institute of Technology (Viet Nam); Bardaie, M.; Ismail, W.; Yahya, A. [University of Pertanian (Malaysia)

    1996-06-01

    Wind and solar energy in Vietnam and wind energy in Malaysia were calculated for their amounts available in respective areas based on meteorological data. Annual average wind velocity 30 m above the ground in Vietnam is 4 to 5 m/s in many points of coastal areas, and a little lower in the inland. On the other hand, wind velocity may exceed 9 m/s in sea areas (on islands). According to the result of a trial calculation using data derived from all the observation points, 10-kW generators and 20-kW generators, if installed, may have their operation factors exceed 20% in many points. Even compared with Cape Tappi, Aomori Prefecture, Japan, where the operation factor is 18.7%, these points in Vietnam are suitable for wind power generation. Average wind velocity 30 m above the ground in Malaysia is only about 4 m/s even at high altitude. However, wind with velocity from 7 to 9 m/s may appear depending on districts. If 10-kW and 20-kW generators are installed, the operation factors in Mersing and Langkawi would exceed 30% and 20%, respectively, where wind has sufficient value of utilization. The operation factor may be low in areas other than the above districts. However, since the observation data were those taken in urban areas, collection of further detailed data is necessary. 4 refs., 7 figs., 3 tabs.

  2. Stress estimation around the survey wells in Hanshin-Awaji area by means of AE/DR and DSCA experiments; AE/DR ho to DSCA ho ni yoru Hanshin Awaji chiiki chosa kui shuhen no chikaku oryoku sokutei

    Energy Technology Data Exchange (ETDEWEB)

    Ito, H.; Kuwahara, Y.; Nishizawa, O. [Geological Survey of Japan, Tsukuba (Japan); Yamamoto, K. [Tohoku University, Sendai (Japan). Faculty of Science; Sano, O. [Yamaguchi University, Yamaguchi (Japan). Faculty of Engineering; Yokoyama, T.; Kudo, R. [OYO Corp., Tokyo (Japan); Xue, Z. [Kiso-Jiban Consultants Co. Ltd., Tokyo (Japan)

    1996-05-01

    A total of 5 wells were excavated in the Hanshin-Awaji area (Ikeda, Takarazuka, Tarumi, Hirabayashi and Ikunami) to collect the core samples, which were analyzed by the AE/DR and DSCA methods to determine crustal stresses. For the AE/DR analysis, the core sample was cut in the vertical direction, and in the horizontal direction at intervals of 45{degree}. The sample of unknown orientation was provided with a datum line common for both methods, to compare the results by these methods. A load was applied to the sample, provided with an AE sensor and strain gauge on the sides, in the longitudinal direction. For the DSCA analysis, the core sample was cut into a cube having a side length of 33mm, with a pair of planes directed in parallel to the datum line. A total of 18 strain gauges, 10mm in gauge length, were attached to the cube. The AE/DR analysis gave the maximum and minimum principal stresses in the horizontal plane and stresses in the vertical direction, whereas the DSCA the maximum, intermediate and minimum principal stresses. 3 refs., 7 figs.

  3. Fiscal 1998 engineer interexchange project (coal mine technology field). Preliminary survey on the international interexchange project in America; 1998 nendo gijutsusha koryu jigyo (tanko gijutsu bun'ya) kokusai koryu jigyo. Jizen chosa (Beikoku)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    As a part of the fiscal 1998 international interexchange project in a coal mine technology field, the survey was made in America. Geological engineering problem has large effect on the protection and productivity of underground coal mines. Promotion of long wall mining has contributed to reduction of disasters, however, recently deaths due to roof collapse and wall collapse are on the increase. A roof evaluation technique was developed for adequate selection of mining methods and support design, and its standardization and diffusion are in promotion. Integration and improvement advanced in facility technology because of worldwide integration by acquisition of coal mine facility manufacturers. Introduction of high-power high-capacity facilities is increasing with introduction of large long wall working faces, and development of rear transport system technology and labor saving by remote control are also in promotion according to such trend. As automation and labor saving technology of mining facilities, the automated direction detection and control system by laser and gyroscope is under development. (NEDO)

  4. Development of the EM tomography system. Part 2. Sensitivity studies of anomalous body by model studies; EM tomography system no kaihatsu. 2. Model kaiseki ni yoru ijotai no kando chosa kekka

    Energy Technology Data Exchange (ETDEWEB)

    Kumekawa, Y.; Miura, Y.; Takasugi, S. [GERD Geothermal Energy Research and Development Co. Ltd., Tokyo (Japan); Arai, E. [Metal Mining Agency of Japan, Tokyo (Japan)

    1997-05-27

    A model analysis was used to investigate sensitivity of a two-dimensional structure on a resistivity anomalous body by using an electromagnetic tomography system. The resistivity model handled a three-dimensional structure. The model was prepared as a pseudo two-dimensional model in which a low resistivity anomalous body with 1 ohm-m was incorporated that has a basic length of 1000 m in the Y-direction in a homogenous medium having 100 ohm-m. As a result of the analysis, the following matters were elucidated: if a low resistivity anomalous body is present in a shallow subsurface, its impact starts appearing from lower frequencies than when the anomalous body exists only at a greater depth; if a high resistivity anomalous body exists, the detection sensitivity is lower than for the low resistivity anomalous body, but the analysis would be possible by using the phase because the phase has made a greater change; the source TxZ shows a change from lower frequencies than for the source TxX, and the amount of change is greater, hence the detection sensitivity on an anomalous body may be said higher with the source TxZ; however, for the anomalous body in shallow subsurface, the source TxX is more effective since it is not subjected to a too great impact at a greater depth. 5 refs., 7 figs.

  5. Exploration of shallow subsurface resistivity structure using a portable TEM system: TEM-FAST prosystem; Kan`igata TEM ho sochi TEM-FAST prosystem ni yoru senbu hiteiko chosa

    Energy Technology Data Exchange (ETDEWEB)

    Miura, Y.; Kumekawa, Y.; Takasugi, S. [GERD Geothermal Energy Research and Development Co. Ltd., Tokyo (Japan)

    1997-05-27

    Discussions were given on effectiveness of the TEM-FAST ProSystem which is a portable TEM system developed recently for use in exploration of shallow subsurface resistivity. The system consists of a loop type antenna, the TEM-FAST as the main equipment, and a host computer, the host computer controlling the entire system. The system acquires transient response data in secondary induced magnetic fields lasting 4 {mu} sec to 1 m sec. The number of data is 5490 stacks in one measurement, and the data acquisition time is about three minutes. Measurements were carried out by using the TEM-FAST in the vicinity of a well, whose results were compared with those of electric logging, and discussions were given on them. Although the electric logging results had no data available for depths shallower than 35 m, the measurement results from the TEM-FAST were found highly harmonious with those of the electric logging. In addition, there were transmission and telephone lines in locations about 10 m away from the well during the measurement, but extremely high data quality was discovered. 6 refs., 7 figs., 1 tab.

  6. Fiscal 1996 survey of potential international cooperation for a long-term scenario on CO2 reduction; 1996 nendo CO2 sakugen ni kakawaru choki shinario ni kansuru kokusai kyoryoku kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of working out a CO2 reduction scenario and a CO2 policy introduction scenario, a survey was conducted of comparisons between ten and several models which are world-known and models of the New Earth 21, potential international cooperation to be carried out in the future, etc. The survey included organizations which are developing CO2 policy evaluation models, survey reports made in the past, details of literature for the analysis and arrangement. From the result, details of the questionnaire survey and organizations to be surveyed were decided on for the questionnaire survey. Objects for the survey were 7 countries and 22 organizations, and survey items were places for information exchange, sending/receiving of researchers, exchange of input data, comparative calculation based on the common database, joint research work, economy, the carbon tax, impact, renewable energy, how to handle and think of the carbon isolation, etc. As a result of the survey, proposed were a workshop on CO2 reduction, a comparative study of simulation models, etc. 25 refs., 50 figs., 12 tabs.

  7. Survey on high-level application of new-functional metal hydride (MH) to industrial equipment; Shinkino suiso kyuzo gokin no sangyo kiki eno kojigen tekiyo ni kakawaru doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    A survey of research and development overseas and in Japan was conducted on application of metal hydride (MH) to new-functional industrial equipment such as actuators which make good use of properties of MH. An MH actuator manufactured based on a new movement principle is useful as welfare equipment in terms of its big power generated, light-weight and quiet motion. MH can raise and lower heavy matters by release and absorption of hydrogen gas. In the example where the MH actuator is used for raising and lowering the seat portion of the wheelchair, a total weight of the rise/fall portion of the wheelchair seat was found to be approximately 5 kg including that of the battery. As to welfare equipment and tools which are expectedly commercialized by using MH actuators, considered are an aid lift for taking a bath, a western-style toilet seat with a function of helping stand-up, a bedsore preventing bed, a device aiding motions of fingers/elbows, etc. Besides the welfare equipment, considered are force display for presenting force information, a small-size muscular reinforcement training device, ocean robot needing high power and low speed, etc. 72 refs., 110 figs., 28 tabs.

  8. Worldwide clean energy system technology using hydrogen (WE-NET). subtask 9. Investigation of innovative and leading technologies; Suiso riyo kokusai clean energy system gijutsu (WE-NET). subtask 9. Kakushinteki sendoteki gijutsu ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The WE-NET Project is a long-term project designed to ensure that an energy network technology using hydrogen becomes a reality not later than 2020. So the project cannot remain effective unless constant efforts are made to foresee future trends of technology and optimize it as the making of entire system for the project. In this project, new technologies which are not up for development are also investigated. Their feasibility should be studied, if necessary. From the foregoing point of view, new technologies are studied, collected and evaluated. Thus, useful suggestions and proposals may be made as to the course for the project to follow, as well as its research and development. Proposals highly evaluated up to FY 1995 are the hydrogen-oxygen internal-combustion Stirling`s engine, hydrogen production by solid oxide electrolysis, magnetic refrigeration technology for liquefaction of hydrogen, solar thermal hydrogen production with iron sponge technology, and hydrogen producing technology with photocatalyst. Conceptual investigation themes in FY 1996 are the hydrogen internal-combustion Stirling engine, solar thermal hydrogen production, phototransformation process, and high-temperature steam electrolysis. 9 figs., 54 tabs.

  9. Fiscal 1996 verification survey of geothermal exploration technology. Development of the fracture type reservoir exploration method (development of the elastic wave use exploration method); 1996 nendo chinetsu tansa gijutsu nado kensho chosa. Danretsugata choryuso tansaho kaihatsu (danseiha riyo tansaho kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of exploring accurately fracture groups greatly restricting the fluid flow of geothermal reservoirs, technical development was made for applying the elastic wave exploration technology such as the high precision reflection method, VSP, elastic wave tomography to the geothermal exploration. The Okiri area, Kagoshima prefecture was selected as a demonstrative field of a typical type where the steep and predominant fracture rules the geothermal reservoir, and experiments were conducted using the high precision reflection method and VSP. Fracture models were made, and the analysis results were studied by a survey using the array CSMT/MT method and by a comparison with existing data. Reformation of the underground receiving system used for VSP and elastic tomography is made for improvement of its viability, and was applied to the VSP experiment. The treatment/analysis system of the core analyzer was improved, and cores of the demonstrative field were analyzed/measured. Further, the exploration results, core analysis results and existing data were synthetically analyzed, and fracture models of the demonstrative field were constructed. Also, effectiveness and viability of the elastic wave use exploration method were studied. 90 refs., 418 figs., 24 tabs.

  10. Feasibility study for international collaboration on photovoltaic power generation and long-distance energy transmission technologies utilizing desert areas environment; Sabaku chiiki wo riyoshita taiyoko hatsuden chokyori yuso gijutsu ni kakawaru kokusai kyoryoku kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    A workshop was held at Tokyo in March, 1997 on the research and development and feasibility study for international collaboration on photovoltaic (PV) power generation and long-distance energy transmission technologies utilizing desert areas environment. Two speakers from the USA, one from Italy, and two from China were invited, and four speakers in Japan presented papers. A total of 48 persons participated. In the technical sessions, `World energy demand and PV system potential` by Prof. Kurokawa, `Long distance transmission of PV power` by Mr. A. Invenizzi, `Case studies of large scale PV systems distributed throughout desert areas of the world` by Mr. Hirasawa, `Linking renewable energy resources around the world` by Mr. P. Meisen, `Properties of large scale PV plant in the USA` by Mr. J. Benner, `Future prospect of PV electrification in China` by Mr. Kong Li, `Application of large-scale PV systems in deserts in China` by Mr. Isomura, and `Effects of large-scale PV power plant in a climatic desert areas` by Prof. Ihara were presented. 38 refs., 62 figs., 29 tabs.

  11. Investigation of techniques for analyzing and evaluating the effects of newly developed new-energy and energy-saving technologies; Shinsho energy gijutsu kaihatsu koka no bunseki hyoka shuho ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    For the comprehensive and rational evaluation of technologies related to new energy and energy saving, investigations have been conducted about the history and trend of related policies and technological development. Japan saw a great change in the demand-supply structure in 10 to 15 years following the first oil crisis when oil was partially replaced with atomic energy and LNG and energy-saving efforts came into practice. However, the diversification of energy sources by developing new energies and improvement on the self-sustenance rate remain far from success. Related policies both in Japan and overseas are shifting from the conventional efforts for stable supply and economic growth to the handling of deregulation and environmental problems. Energy stratagem has been studied, not regarding energy technology as a mere economic task and working out how the demand for energy should be with the restricted resources, social economy, and environments, taken into account. Models and scenarios are proposed, for the quantitative analysis and evaluation of the energy stratagem wherein the development of technologies for new energy and energy saving are positioned clearly. Especially, concepts emphasized therein are the technique of power source planning and the development of regenerative energy. 24 refs., 32 figs., 15 tabs.

  12. Fiscal 1999 survey report. Part 2. Research study on restraint of carbon dioxide generation by green chemistry; 1999 nendo green chemistry ni yoru CO{sub 2} hassei yokusei ni kakawaru chosa kenkyu. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    In connection with green chemistry, a concept of bringing paradigm shift to chemical technologies as something that makes reduction in environmental load compatible with economic activities; surveys were made this year on the developments of fine chemicals from renewable resources such as cellulose among the cases of developing chemical substances/products to be called 'green chemicals' reducing environmental load; developments of surfactants produced by certain microorganism, plastic additives with reduced pollutant loads, particularly fire retardants and environmentally benign reactant solvents; concept of green chemistry in the development of chlorofluorocarbon-alternatives; and up-to-date technological level concerning a design method of chemical materials and an estimation method for chemical safety using quantum chemistry calculation. In regard to the chemical materials and products intrinsically containing a certain level of risk, R and D should be reinforced and accelerated in the future on the alternative materials/products reducing their toxicity. In this case, along with the importance of discussing compatibility of technological possibility with economical adaptability, sociological study seems to be necessary in incorporating environmental load reduction into economic evaluation. (NEDO)

  13. Study on construction of temporary dwellings and problems caused by living long time on Hanshin-Awaji Great Earthquake; Hanshin / Awaji daishinsai ni okeru okyu kasetsu jutaku no secchi to chokikan shiyo suru baai no kadai ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    Takahashi, K.; Nakamura, Y. [Nagasaki Univ. (Japan)] Shimizu, Y. [Kumagai Gumi Co. Ltd., Tokyo (Japan)

    1998-10-20

    Two years after the above-titled earthquake, an examination was performed on inhabitants in the temporary dwelling houses in Kobe, center of the calamity, and problems caused by a long stay there were clarified together with a grasp of the evolving problems by comparing the result of survey carried out immediately after the disaster. The number of such temporary dwelling houses amounted to 29,128 within Kobe City and 3,168 outside of the city. According to the room arrangement, they were either one f 4 types : 2-rooms with a kitchen, 1 room with a kitchen, dormitory and those specifically for aged persons. There were 59,449 applications at the first offer of 2,702 houses. The priority of their assignments and so on are explained. As for the housing structure, numerous complaints concerned with the room temperature, noise and so forth. As for the living environment, lack of nearby commodity shop, omission of transportation access, ill drainage of the housing sites were pointed out and the matters of demand to the local authorities included the installation of mail post and street lights. As for the health management, insomnia, stiff shoulder, lumbago and other bad physical conditions were revealed. The financial difficulty and the high house rent were obstacles to migrate to other places. The prolonged temporary lives worsened the apprehension of dwellers for the earthquake, typhoon, fire and alike. Some features for the calamity are described in comparison with the result of survey on those who were compelled to live under similar conditions by the eruption of Mr. Fugen. 6 refs., 13 figs., 15 tabs.

  14. Survey for making a data book related to the development of new energy technology (the photovoltaic power generation); Shin energy gijutsu kaihatsu kankei data shu sakusei chosa (taiyoko hatsuden)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    A data book related to the photovoltaic power generation was made as a part of the systematical preparation of new energy related data. The paper arranged the importance of introducing the photovoltaic power system and the CO2 reduction effect at levels such as the government, local government, industries and individuals which are users. Described were the production quantity by region/type/company, shipment by usage, production amount and prices of solar cells. Arranged was the situation of policies on the photovoltaic power generation in Japan and developed countries. Examples of the introduction in countries including Japan were examined to know the introduction quantity and target. The paper introduced the subsidy system, preferential tax system and loan system for the introduction of the photovoltaic power system in Japan. The flow was summed up from the planning of the system introduction to the installation. The status of handling with the system introduction of government related organs and local governments was stated. The paper showed a list of the companies related to the photovoltaic power system and the references of solar cell makers and solar system installation makers. The development is so quickly made that the renewal every year of the system and the quality enhancement are required. 32 figs., 112 tabs.

  15. Preliminary research on the activities implemented jointly (AIJ) workshop. Present AIJ in China; Kyodo jisshi katsudo workshop ni kansuru jizen chosa. Chugoku ni okeru kyodo jisshi katsudo no genjo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    In order to positively promote the activities implemented jointly (AIJ) of the United Nations Framework Convention on Climate Change, the AIJ workshop acting in contact with Asia/Pacific countries, in particular, Chine having large effect on global environmental pollution was researched preliminarily. AIJ approved in the convention is the effective means to promote measures against global warming cost-effectively by optimally combining every developed country`s technology, know-how and fund. Distribution of the credit for greenhouse gas emission reduction by AIJ is unsolved because of the disagreement of views between developed and developing countries. The pilot phase of AIJ projects is carried out by voluntary workers jointly with developing countries until establishment of international rules. In fiscal 1995, the following were studied: the framework necessary for AIJ between Japan and China, the organization for promoting concrete AIJ projects, and the means to create the reliance of China for AIJ projects. 6 refs., 10 figs.

  16. Survey of history/succession of industrial technology. Book of survey of the domestic industrial technology which contributed greatly to the industrial development; Sangyo gijutsu rekishi keisho chosa. Sangyo no hatten ni okiku kiyoshita kokunai sangyo gijutsu no chosahen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper surveyed a history of the industrial technology development which contributed to the innovation of technology in Japan for contribution to the future selection of technical themes and decision on developmental methods. In accordance with the increasing contribution of the Japanese industrial technology to scientific and economic activities in Japan and abroad, it is important to clarify a historical significance of the industrial technology and to make the most of results of the survey for the future succession/development of industrial technology. The survey focused on chemical processes brought up as the Japanese industrial technology which is regarded as world-famous and on the systematical study of the history of the Japanese scientific technology. Hereafter, this becomes a guiding principle for engineers. The paper arranged the survey results of production processes of 2-ethylhexanol, acrylic acid, acrylamide, and cresol/resorcinol, optical resolution process of amino acids, and flue gas desulfurization process. The paper also surveyed technologies of ammonia synthesis, coal liquefaction, high polymer film production and synthesis of medical raw materials. The results were obtained which are suggestive for developing creative/original technology. 210 refs., 93 figs., 49 tabs.

  17. Study on the heating and cooling pattern and heating and cooling period in residential buildings on the basis of national scale surveys; Zenkokuteki chosa ni motozuku jutaku no danreibo jikan oyobi danreibo kikan ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Bogaki, K.; Sawachi, T. [Ministry of Construction, Tokyo (Japan); Yoshino, H. [Tohoku Univ., Sendai (Japan)] Suzuki, K. [Hokkaido Inst. of Tech., Hokkaido (Japan)] Akabayashi, S. [Niigata Univ. (Japan)] Inoue, T. [Science Univ. of Tokyo (Japan)] Ono, H. [Sugiyama Women`s Senior Coll., Nagoya (Japan)] Matsubara, N. [Kyoto Prefectural Univ. (Japan)] Hayashi, T. [Kyushu Univ., Fukuoka (Japan)] Morita, D. [Ryukyu Univ., Naha (Japan)

    1998-07-30

    Energy consumption in summer and winter, life style and environment consciousness were surveyed by questionnaire in eight city areas; heating and cooling patterns and heating and cooling periods are clarified by areas, and regional characteristics and differences according to the residential structure and locations are examined. Regional differences in operating hours of the cooler are relatively small while regional differences in operating hours of the heater are large as is shown by about 3 times difference between the longest Sapporo and the shortest Naha. The heating and cooling patterns are intermittent except for Sapporo in winter. As to the relation between the startup temperature and outdoor temperature, the outdoor temperature at 50% occupancy of the cooler showed regional differences; the outdoor temperature at 50% occupancy of the heater was about 10degC except for Naha. The pattern of the cooler occupancy showed two peaks in a day except for Naha. Possibility of correlation between the outdoor temperature at initiation and termination of the cooler operation and minimum death rate due to cerebrovascular disease was indicated. 12 refs., 11 figs., 3 tabs.

  18. Achievement report for fiscal 1998 on the technological development of super metals. Technology to create iron-based mesoscopic tissue controlling materials; 1998 nendo super metal no gijutsu kaihatsu seika hokokusho. Tetsukei meso scopic soshiki seigyo zairyo sosei gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Research and development has been carried out on super metals with an objective to draw out properties possessed by iron and steel materials to their maximum extent and further enhance their recycling performance to make them friendly with global environment. The final goal of this project is to 'establish a technology to create micro tissue steel having crystalline particle diameter of about 1 {mu}mm or less and size having thickness of 1 mm or more by making the steel tissues uniform and multiple in phase'. The studies in the current fiscal year were moved forward mainly on obtaining ultra fine crystalline particles of 1 {mu}mm or less, identifying the ideal large distortion processing conditions, and structuring the guidance principles for ultra-fine micronization of the crystalline particles by using large distortion processing. Discussions were also launched on further micronization of crystalline particles by optimizing chemical composition and on expansion of the process windows assuming practical application thereof in industrial scale. Furthermore, material property evaluation was also begun on ultra-fine crystalline particle materials of smaller than 1{mu}mm. As the mesoscopic structure analyzing technology for the ultra-fine crystalline particle materials, an in-lens resolution SEM was introduced, and the basic method was established. (NEDO)

  19. Report on achievements of research and development of an automatic sewing system in fiscal 1988. Three-dimensional flexible sub-system; 1988 nendo jido hosei system no kenkyu kaihatsu seika hokokusho. Sanjigen flexible sub system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1989-03-01

    The Automatic Sewing System Technology Research Association was commissioned from the Agency of Industrial Science and Technology on research of a production system by apparel types and systematization of an experiment plant. As the research on systematizing the experiment plant, the association is tackling with the researches on a high-speed laser cutting sub-system, a flexible sewing sub-system, a hi-tech assembling sub-system, and a three-dimensional flexible pressing sub-system. This paper reports the achievement of the research and development on the three-dimensional flexible pressing sub-system. It was intended to move forward development of technologies to put on and take off apparels and transport products, to achieve interlocking with other component technologies, and to structure an efficient pressing and processing system for finish. An experiment plant was built for ladies' blazer coats set as objects of model wears. The plant operation experiments and comprehensive evaluation are scheduled to be performed in fiscal 1990. Therefore, basic design research was carried out on an automatic put-on/take-off device and an auto-hanger system with an objective of application of the experimental plant. Studies on accuracy improvement was executed in the research of setting shapes of flexible dummies. In the research of pressing conditions, application of the 'estimation type information retrieval and control system' was studied. As a result, achievements were obtained as nearly as has been initially intended. (NEDO)

  20. Achievement report on research and development of medical and welfare equipment technology. Meal delivery robot for carrying food trays to aged and disabled persons; Iryo fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho. Koreisha shogaishayo shokuji hanso jido robot system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-11-01

    Research and development of a mobile robot is carried out, who steers the meal distribution wagon, serves the meal at the bedside of aged or disabled people, retrieves the dishes when the meal is over, and then carry them back. The conditions discussed in the study for the robot to simultaneously satisfy are mentioned below. It should be of the size and weight fit for the job, avoid obstacles while travelling automatically and safely, behave at a safe and proper rate not jeopardizing the patient during the feeding process, communicate with the patient through picture and voice, and capable of acting without causing people to find in it anything overbearing or wrongful. The project began with the concept design process, which was followed by the basic design process, tentative manufacture of parts, tentative manufacture of components, and finally the construction of the whole. The developed robot system, after passing functional tests conducted in a mockup facility, experiences some period of tentative employment at three medical and welfare facilities. It is then confirmed that it safely performs a series of acts including meal serving and dish retrieving and that it is excellent in terms of autonomous self-control, safety, friendliness, and work efficiency. (NEDO)

  1. Report on achievements of research and development of a technology to apply human senses to measurements in fiscal 1995. 3. Appended data; 1995 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu seika hokokusho. 3. Fuzoku shiryohen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Technological know-how candidates were picked up from the achievements in fiscal 1995 on research and development of a human sense index applying technology. To explain, this paper describes work stress evaluation that uses the autonomic nervous system indexes based on electrocardiograms and respiration sensors. In the technology to evaluate composite physiological function measurement stresses, indication was given on database structure and image transition diagrams for a physiological information control system. The study to use skin temperatures as stress indexes presented a control software flow chart of a strain experiment (closing eyes in rest, saliva collection, subjectivity declaration, and controller for tracking works). Also shown are the control software flow chart for a case of monotonous experiments, and the block diagram for an RGB monochromatic signal board in an image processing device. For a technology to use basic alertness as indexes, explanation was given on a system to evaluate the tympanum temperature sensor. For a composite environment conformance evaluation index technology, an automatic CFF value measuring system was described. Introduction was made on experimental stimulation software for a technology to use device and operation conformance as indexes, and on the internal structure for a human comfort meter. (NEDO)

  2. Worldwide clean energy system technology using hydrogen (WE-NET). Interim report of the research and development in Phase 1; Suiso riyo kokusai clean energy system gijutsu (WE-NET). Daiikki kenkyu kaihatsu chukan seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-01-01

    Large scale and effective utilization of renewable energy including hydroelectric power, photovoltaic power, and wind power which are abundant on the earth can contribute to the solution of global environmental issues as well as the release of energy demand and supply. Hydrogen can be produced from the renewable energy, and is converted, transferred and stored if necessary. Such hydrogen can be used in various fields for power generation, fuel for transport, and city gas. In order to establish the technology by which worldwide energy network can be introduced for wide range of fields, conceptual design of a total system has been conducted, and elemental core technologies have been developed. Conceptual design of a practical scale system (total system) including a wide range from production of hydrogen to its utilization has been conducted, and its constitution has been illustrated. In addition, the energy balance and cost of hydrogen have been calculated and analyzed as a trial. Hydrogen production technology, transport and storage technology, and hydrogen utilization technology are introduced as individual elemental technologies. Research results of innovative and leading technologies obtained in FY 1996 are reviewed. 80 figs., 56 tabs.

  3. Fiscal 1997 survey report. `Ultra high electronic technology development promotion project` under consignment from NEDO; 1997 nendo kenkyu seika hokokusho. Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku jigyo `Chosentan denshi gijutsu kaihatsu sokushin jigyo`

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-05-01

    For the purpose of establishing ultra high technology of a next next generation level, the R and D was conducted of ultra fine processing process technology, technologies on limit measuring/analysis/control and new functional electronic materials. Themes of the R and D are electronic beam direct picture drawing system technology, ultra short wavelength electromagnetic radiation patterning/system technology, ultra fine sensitizing technology, ultra high accuracy shading system technology, ultra high tech plasma reactive measuring/analysis/control technology, ultra high tech cleaning basic technology, ultra high sensitivity medium technology, new functional element/film formation technology, etc. This R and D is a greatly influential basic research in the whole industrial field, and therefore, it is necessary that researchers standing foremost in each field of industry/university/government join the project and that various R and D infrastructures are made the most of. For this, the concentrated joint research method and the dispersed joint research method are combined, and the R and D is being conduced by equal partnership of each researcher. 421 refs., 823 figs., 91 tabs.

  4. 1998 Annual Study Report. Research and development of power storage by high-temperature superconducting flywheels (research and development of permanent magnet); 1998 nendo seika hokokusho. Koon chodendo flywheel denryoku chozo kenkyu kaihatsu (eikyu jishaku no kenkyu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    The permanent magnets have been investigated and developed, for eventual commercialization of a 10 MWh power storage system by high-temperature superconducting flywheel. The permanent magnet rotors have been already developed in the previous years using a praseodymium-based magnet (Pr magnet) and neodymium-based sintered magnet (Nd sintered magnet), and the target rotational speed of 30,000 rpm has been attained. For development of the magnetic circuit to produce a stronger and smoother magnetic field, magnetic flux density of the Nd sintered magnet is measured. It shows a lower magnetic flux irregularity than the Pd magnet, but there is still room for further improvement. For development of large-size permanent magnet fabrication techniques, it is confirmed that the large-size Nd sintered magnet can be easily magnetized by partial magnetizing, as is the case with the Pr magnet. In this year, the irregular magnetic flux is three-dimensionally simulated, based on the results obtained in the previous years, to find that the simulated results are in good agreement with the observed ones. The measures to solve the problems are also investigated. It is also confirmed that the large-size ring magnet can be easily magnetized by partial magnetization. (NEDO)

  5. Fiscal 1999 achievement report. Development of technologies for creating high-quality crystalline materials for low-loss power control devices; 1999 nendo teisonshitsu denryoku seigyo soshiyo kohinshitsu kessho zairyo sosei gijutsu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Researches are conducted for the advancement of, and loss reduction for, semiconductor devices for controlling electric power. Physical properties of molten semiconductors etc. are accurately measured in a microgravity environment and computer simulations are performed, which are for the production of larger-diameter, higher-quality semiconductor crystal materials. In the measurement of physical properties of molten semiconductors etc. carried out at JAMIC (Japan Microgravity Center) free-fall facilities where a high-quality microgravity environment is available, measurements are made of the surface tension, density, viscosity index, heat conductivity, and vertical spectral factor of the molten silicon. Solubility is measured of silica, silicon nitride, and silicon carbide, and, in equilibrium with these, the oxygen, nitrogen, and carbon in molten silicon, and highly reliable data are obtained. As for the comprehensive analysis code developed under this subject, the X-ray image data of the surface of a solid solution, collected from a crystal growing in a small Cz furnace at the NEC Fundamental Research Laboratories, and data of oxygen concentration in the silicon crystal agree excellently with the result of calculation, which suggests that the code is reliable. (NEDO)

  6. FY 1990 report on the development of wood-waste/agri-waste pyrolytic gasification technology and utilization technology of gas product; 1990 nendo mokushitsukei haikibutsu no netsubunkai gas ka gijutsu to seisei gas no riyo gijutsu kaihatsu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-03-01

    It is urgently necessary for the Philippines, which has no promising energy source to replace imported oil and lacks hard currencies, to reduce dependence on oil. The country, consisting of a number of islands, has faced many difficulties in construction of large-scale power transmission grids covering wide areas, which greatly retard development of local industries and dissemination of electricity. Therefore, great expectations have been placed on the techniques this project plans to develop for utilization of wastes as the energy source. This 5-year project (FY 1990 to 1994) is aimed at joint research and development of (thermal decomposition/gasification and power generation system) for transforming large quantities of wood-wastes/agri-wastes left unutilized into electric power, in which thermal decomposition/gasification of the wastes is combined with gas engine/power generator systems, and thereby to establish the systems suitable for the developing country. The major R and D results obtained in FY 1990 as the initial year include negotiations with the Philippines, on-the-spot surveys for the demonstration plant sites and conditions, and conceptual designs of the demonstration plant. (NEDO)

  7. Report for fiscal 1994 on simple operation type CAD/CAM system development through international cooperation; 1994 nendo 'kan'i sosagata denshi sekkei seisan shien system no kaihatsu ni kansuru kenkyu kyoryoku' ni kansuru hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    The aim of this project is to accelerate the advancement of supporting industry (SI) for the sake mainly of manufacturing industries in Asian countries through researches carried out jointly with the Asian countries on electronic designing and manufacture supporting systems that suit actualities in the respective participating countries. In fiscal 1994, activities are conducted which primarily involve inquiries into the current status of other parties' organizations, fermentation of mutual understanding, and, in Japan, a review of plans of some cooperative projects. On-site investigation parties are dispatched to other countries on two occasions, who talk with the other parties about the drafting of memoranda of understanding, contents of the assistance to be extended, inquiries into the actualities of the visited parties, and the explanation of what technologies Japan has to offer. A production-related futuristic integrated information system promotion committee is established and, thereunder, working groups are organized on automobiles and their parts, electrical home appliances and their parts, fiber and apparel, participated in by learned men, and studies are conducted about the current status and trend of electronic designing and manufacture supporting systems and about steps for implementing the subject project. (NEDO)

  8. Result of R and D of medical welfare equipment technology in 1994. Part 5. Next-generation dental product engineering system; Iryo fukushi kiki gijutsu kenkyu kaihatsu 1994 nendo seika hokokusho. 5. Jisedai oraru device engineering system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-05-01

    The R and D of a method to computer-aidedly design/make (CAD/CAM) the denture were made to heighten the conformability and productivity of its manufacture. To prepare the configurational measurement apparatus, the software was developed to measure the configuration of abutting tooth and opposed tooth, and their occlusal surface, and transmit their data on position coordinates to the CAD part. The prototype of this apparatus realized the measurement accuracy within 15 micron m in Cartesian system. However, it is problematic that an error is produced by the laser beams` reflection which is caused by the bubbles. To develop the CAD, it was made clinically more precise by adding the movement simulation of chin to the software to design the single crown. To develop the device-working apparatus, a single crown-working apparatus numerically controlled with five shafts was prototypically prepared with an edged tool which moves right and left, before and behind, and up and down to cut the objective piece, being revolved and controlled. As for the development of pieces to be cut, resin type materials gave a better result than composite resin type ones commercially sold for the filling use. The removal of microscopic defect was studied for the ceramic type material.

  9. Fiscal 1998 R and D report on human feeling measurement application technology. Pt. 1. Outline; 1998 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu itaku kenkyu seika hokokusho. 1. Gaiyohen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report outlines the fiscal 1998 R and D result on human feeling measurement application technology. For development of assessment technology of the impact of work fatigue on human feeling (human feeling index), and assessment technology of the adaptability and affinity between human being and environment or product (environment and product adaptability index), data storage and evaluation by measuring experiment of human feeling, and modification of every index toward the final index based on the above data were carried out. Further case studies were carried out to reflect the above both indices to design of living products or residence and office environments, and new data were also collected. The database model for using previously collected human feeling data effectively, and the sweating manikin for estimating human thermal feeling reasonably were developed. In addition, the human feeling measurement manual was prepared to diffuse these technologies. The R and D system is also described. (NEDO)

  10. Report on follow-up for joint research of valuable resources recovery techniques from brackish water; Kansuichu no yuka shigen kaishu gijutsu ni kansuru kenkyu kyoryoku follow up hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This report describes follow-up for research and development on the recovery of valuable resources, such as magnesium, bromine and boron, contained in the brackish water for manufacture of common salt in the coastal region of Mexico. For the field survey, salt garden, irrigation plant and manufacturing plant of dinning salt were inspected. The optimum site was examined by assuming desalination plant and solar pond. The groundwater in coastal regions is progressively salified. Since the coastal region is a tourist resort with an round-trip area of whales, environmental protection is indispensable. For the joint research with invited researchers, the solar pond system and fresh water generation were studied. As a result, it was found that the solar pond system is an excellent method for keeping thermal energy in a low cost at the salt garden with abundant solar energy, and that the desalination system combined with distilling is the most suitable method. 7 refs., 8 figs., 1 tab.

  11. Fiscal 1997 report on the R and D under consignment from NEDO on human sensory measurement application technology; 1997 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu itaku kenkyu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper outlined the result of the fiscal 1997 R and D on `human sensory measurement application technology (HSMAT)` which entered into the second stage. As to the R and D of technology for development of human sensory indices, examples for developing human sensory indices were set up for the following each technology to be developed, and measuring experiments were conducted: technology to assess the effect on physiological senses such as fatigue and awakening, technology to assess human adaptability to various environmental conditions, and technology to assess adaptability of products to humans from a viewpoint of affinity, etc. In relation to the R and D of technology for practical application of human sensory indices, a study was conducted of application examples for using each index to the design of daily products and residential/working environments, and at the same time a prototype database of human sensory data was trially made using part of the experimental data. Moreover, for clothes and working environment to feel better, design/assembly were conducted of a hand/leg movable and sit-on-chair manikin which enables rational estimation of thermal sense of humans. 82 refs., 391 figs., 88 tabs.

  12. Fiscal 1997 report on the results of the international standardization R and D. Data format for rapid prototyping systems; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Sekiso zokei system yo data format

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Concerning the rapid prototyping (RP) system use new RP format and the related software, the paper promoted the international standardization in consideration of relationships with an international standard, STEP. RP, which is a technology to rapidly prototype a solid body based on the three-dimensional CAD data, is used in various fields of product manufacture, medical field, etc., and is expected to further expand its field of application. In this R and D, an international version of the RP software system developed for domestic use was developed, and at the same time a software was trially manufactured so that the data on STEP/AP203/CC5 and CC6 can be delivered to the system. Moreover, a plan on new AIC51X as the STEP/AIC suitable for PR was studied. Relating to these results, the paper conducted the publicity work to the persons concerned in RP in the U.S. and Europe, and also explained those at ISO/TC184/SC4 (STEP Conference). The PR use interface enabling highly rapid and accurate data processing reached to a stage of the international commercialization, and at the same time the study items were materialized for proposal of the new STEP standards suitable for RP. 18 refs., 80 figs., 12 tabs.

  13. Report on the project for spread/promotion of technology for the industrial waste optimized treatment in the Asian region; Asia chiiki sangyo haikibutsu tekiseika shori gijutsu nado fukyu sokushin jigyo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The International Symposium `98 on the industrial waste problem in the Asian region was held in Tokyo on February 18, 1998. MITI commented on the present situation of the industrial waste problem in Japan and Japan`s environmental tackling toward the Asian region, and also Asian countries (China, the Philippines, Thailand and Korea) made reports. Japan reported on environmental preservation measures taken in the industrial circle, the industrial waste problem at companies which advanced into Asian countries, effects of the Basel Convention (which restricts border-crossing movement of harmful wastes) on recycle activities, Japan`s role in Asia, etc. In the panel discussion, discussions were made on human interchange in the informatization, recycling technology, shortage of personnel concerned with environmental protection, construction of a network in the Asian region and Japan` s role, etc. As to the treatment system for waste, the necessity was recognized of studying systems which meet with actual states of each country. It is also necessary to go on with discussing how the system should be for cooperation between governments and private companies. Importance of the recycle and information exchange was emphasized. 10 refs., 14 figs., 27 tabs.

  14. Overview of FY1997 human media technology R and D; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu seido Shin energy Sangyo Gijutsu sogo Kaihatsu Kiko itaku jigyo. Human media no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper reports a summary of results in fiscal 1997 of research and development of human media technology. Fiscal 1997 launched design and trial fabrication of the following items: interface to improve efficiency and safety of plant operators, accommodation of multimedia contents to aid Kansei design, city development design aiding technologies using contents retrieval and presentation technologies and virtual reality, and empirical evaluation technologies for safety, comfort and convenience. Specific study assignments were extracted on a virtual media technology, a Kansei media technology and a knowledge media technology being three elementary technologies for human media to make clear the research and development approaches to be taken in the coming fiscal years. In addition, a human media technology committee, a research and development working group, and an investigation working group were established. Also launched were investigations on research trends in the human media technology, and investigative researches on contacts of information needs in industries with human media. 59 refs., 114 figs., 24 tabs.

  15. Achievement report for fiscal 1999 on research and development of technologies for medical welfare equipment. Home rehabilitation system for aphasia patients; 1999 nendo iryo fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho. Shitsugosho zaitaku rehabilitation shien system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-05-01

    Element technologies under development involve (1) an authoring system for assistance program processing, (2) self-training system for supporting home rehabilitation, (3) human interface for aphasia patients and caregivers, (4) remote rehabilitation evaluation and diagnosis supporting system, and (5) a communication assisting system. Under item (1), a material incorporating interface, training contents layout and combination function, and general-purpose interface specifications are determined, and a one-piece system is designed and developed. Under item (2), a self-training player that behaves in compliance with the authoring specifications is designed and developed. Under item (3), a secondary unit is fabricated on the assumption of its use at an actual treatment scene. Under item (4), remotely controlled two-way face-to-face communication, camera control, shared operation of a training player, training scenario transfer component, etc., are developed and, furthermore, a one-piece system is designed and developed to support the therapist's rehabilitation assessment and diagnosis in coordination with the above-mentioned remotely controlled functions. Under item (5), a network communication component and an auxiliary function using voice synthesis are added for designing and developing a one-piece system that enables long-distance communication between the therapist and patients. (NEDO)

  16. Fiscal 2000 achievement report on the research and development of medical and welfare apparatus/technology. Home rehabilitation system for aphasia patients; 2000 nendo iryo fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho. Shitsugosho zaitaku rehabilitation shien system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-05-01

    In the effort to develop an authoring system for assistance programs, a self-training system to enhance home rehabilitation, a remote rehabilitation evaluation/diagnosis supporting system, and a communication assisting system, the systems developed in the preceding fiscal years were customized and, together with their operation manuals, introduced to seven hospitals and subjected to evaluation. The results were analyzed, and improvement centering on the ease of operation was carried out. Various development efforts were exerted to improve on what were strongly demanded. As for the aphasiac/caregiver interface, it was distributed to every hospital concerned. There was a demand for immediate introduction, and then the interface was developed into a practical tool to satisfy the demand. This enabled aphasiac patients to receive training stimuli effectively through various sense organs. (NEDO)

  17. Result of R and D of medical welfare equipment technology in fiscal 1994. Part 6. Therapeutic training system for preventing incontinence of urine; Iryo fukushi kiki gijutsu kenkyu kaihatsu 1994 nendo seika hokokusho. 6. Nyoshikkin boshi kunren sochi

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-05-01

    A portable system was developed so as to prevent the urinary incontinence and enable the aged persons and patients to live their comfortable life. In the measurement of urinary volume, its correlativity with the change in impedance was confirmed with a small and light-weight prototype. As a result of improvement of the ultrasonic method, the measurement accuracy was heightened with miniaturization. The usefulness and safety could be clinically confirmed in the urination control by electric stimulation. Based on the above element technologies, the total system was then studied by interlinking the intravesical urinary volume measurement system and urination control system. Particularly for the patients of urgent urinary incontinence, an in vitro test was conducted with a system into which the electric stimulator was integrated. As a result, this system was good as a nursing system. Through an animal experiment on iontophoresis, the urination was known to be controllable with skin-permeating drugs. However, it was known that those drugs are pharmaceutically classified into the new DDS group by the Drugs, Cosmetics and Instruments Act. Therefore, the clinical application plan was partially revised for the present system using them and made to be a subject of future study.

  18. FY 1992 Report on results of the research and development of the technologies for creating/processing advanced biomaterials. Part 1; 1992 nendo senshin bio zairyo no sosei kako gijutsu no kenkyu kaihatsu seika hokokusho. 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-03-01

    This project is aimed at development of the materials which show functions in a living body by coating a metal or synthetic resin substrate with layered peptide synthesized to contain unusual amino acid. A total of 9 areas are investigated; (1) designs of peptide structures/functions, (2) technologies for controlling conformers, (3) peptide with photoelectric conversion functions, (4) enzyme-aided synthesis of peptide, (5) methods for introducing unusual amino acid into peptide, (6) substrate forming technologies (immobilizing peptide and putting it one on another on the substrate), (7) substrate modifying technologies, (8) reagent for binding peptide to the substrate, and (9) technologies for creating and stabilizing biomaterials with molecule-recognition functions. The item (1) involves structural analysis of imidazoline compounds with a microphage-migrating activity, and understanding the relationship between the steric structures and physiological activity, to start screening the peptide design procedures. The item (2) sets the studies on the molecule recognition mechanisms and creation of the molecule-recognizing molecules from ligands as the research targets. The item (3) selects the method for synthesizing amino acid substituted with a squarylium pigment. (NEDO)

  19. FY 1992 Report on results of the research and development of the technologies for creating/processing advanced biomaterials; 1992 nendo senshin bio zairyo no sosei kako gijutsu no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-03-01

    This project is aimed at development of the materials which show functions in a living body by coating a metal or synthetic resin substrate with layered peptide synthesized to contain unusual amino acid. A total of 9 areas are investigated; (1) designs of peptide structures/functions, (2) technologies for controlling conformers, (3) peptide with photoelectric conversion functions, (4) enzyme-aided synthesis of peptide, (5) methods for introducing unusual amino acid into peptide, (6) substrate forming technologies (immobilizing peptide and putting it one on another on the substrate), (7) substrate modifying technologies, (8) reagent for binding peptide to the substrate, and (9) technologies for creating and stabilizing biomaterials with molecule-recognition functions. The item (1) involves structural analysis of imidazoline compounds with a microphage-migrating activity, and understanding the relationship between the steric structures and physiological activity, to start screening the peptide design procedures. The item (2) involves control of peptide conformers by substituting part of conformer-controlled amino acid which constitutes peptide. The item (3) selects the method for synthesizing amino acid substituted with a squarylium pigment. (NEDO)

  20. Fiscal 1997 report of the development of high efficiency waste power generation technology. No.2 volume. Pilot plant verification test; Kokoritsu haikibutsu hatsuden gijutsu kaihatsu (pilot plant jissho shiken). 1997 nendo hokokusho (daini bunsatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    As to a high efficiency waste power generation system using general waste as fuel, the details of the following were described: design/construction management and operational study of pilot plant, design/manufacture/construction of pilot plant, and study of an optimal total system. Concerning the construction management and operational study, the paper described the application for governmental/official inspection procedures and taking inspection, process management of pilot plant, site patrol, safety management, management of trial run of pilot plant, drawing-up of a verification test plan and test run, etc. Relating to the design/manufacture/construction of pilot plant, an outline of the pilot plant was described. The paper also stated points to be considered in design of furnace structure and boiler structure, points to be considered of the verification test, etc. As to the study of an optimal total system, the following were described: survey of waste gasification/slagging power generation technology, basic study on RDF production process, survey of trends of waste power generation technology in the U.S., etc. 52 refs., 149 figs., 121 tabs.

  1. FY 1998 result report. Research/development on the energy overall development/utilization technology of gas hydrate resource; 1998 nendo seika hokokusho. Gas haidoreto shigen no energy sogo kaihatsu riyo gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This study is aimed at studying for survey of gas hydrate (GH) deposit required for GH resource development and gathering of it, and further at studying for industrial utilization technology development of GH which is different in formation condition depending on kind of gas with which it reacts. The results of FY 1998 are as follows. In the study of the situation of existence of gas hydrate in the tundra, the sedimentary environment of the tundra where natural gas hydrate exists was simulated in laboratory to measure thermal conductivity of the sediments including GH. In this fiscal year, design/fabrication/calibration were conducted of the GH synthesizer and thermal analyzer. In the study of GH gathering technology in the tundra, a technology is discussed for recovering gas from GH layer and at the same time substituting CO2 hydrate for GH by blowing CO2 into the geologic layer. In FY 1998, formation/dissociation behaviors were first studied of methane/CO2 mixture hydrate. For the overall energy development of GH resource and promotion of R and D of the utilization technology, studies were made on physical properties of GH and development of the usage. (NEDO)

  2. Fiscal 1998 international research cooperation project. Research report on development of ultra-solid lubricant with cluster diamond; 1998 nendo kokusai kenkyu kyoroku jigyo seika hokokusho. Kurasuta diamond wo riyoshita kotai junkatsu fukugo zairyo no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Study was made on cluster diamond-dispersed composite materials to develop advanced ultra-solid lubricant. As for processing technology of such composite materials, study was made on the uniform mixing condition of cluster diamond and Cu or Cu-Sn alloy by mechanical milling. The fabricated composite powder was caked by vacuum hot compressive formation technique. The production process of composite materials composed of cluster diamond and TiO{sub 2} was also developed by using sol-gel technique. As for formation of a functional layer and development of micro- formation technology, the prototype forming equipment using radial extrusion process and the mould were designed and prepared. In the preliminary experiment only for matrix, study was made on working limit, material flow, fine recrystallization and working condition during working. The friction test result showed the antifrictional property of the cluster diamond-dispersed composite materials using Cu, Cu-Sn, Al, Al-Si as matrix. (NEDO)

  3. Fiscal 1993 report on results of R and D on innovative technology for producing advanced biomaterial; 1993 nendo senshin bio zairyo no sosei kako gijutsu no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    R and D was conducted on a bio-functional material that is formed by synthesizing non-natural amino acids required for the manifestation of the function, incorporating the amino acids into new bio-functional peptides to be synthesized, and fixing the peptides on a substrate such as plastics. Activities were carried out in three areas, which were (1) innovative technologies for producing functional molecules, (2) R and D on materialization technologies of functional molecules: technique of pattern formation by photochemical reaction and of fixation, and technique of preparing peptide film using vacuum thin film forming technology, and (3) comprehensive investigation and adjustment. In (1), migration stimulating activity for microphage was selected as a molecular recognition evaluation system, and on the basis of the structural analysis result of a non-peptide compound/imidazolin compound having migration stimulating activity, molecular structural design was carried out for peptides having migration stimulating activity. The result of the analysis revealed that the spatial arrangement of three phenyl nuclei and the presence of basic structures were important. Among the 22 peptides so designed, only Cbz-Phe-Phe-His-NH{sub 2} showed the migration stimulating activity. For the design, a peptide molecule design system CHARMm/QUANTA/PM3 was used. (NEDO)

  4. Fiscal 1994 report on results of R and D on innovative technology for producing advanced biomaterial; 1994 nendo senshin bio zairyo no sosei kako gijutsu no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    A material that manifests biological function is being developed by synthesizing peptide containing non-natural amino acids and by combining with a material such as a silicon substrate. Activities were conducted in the two areas of (1) development of innovative technologies for producing functional molecules (structure/function design of peptide) and (2) development of materialization technologies of functional molecules. In (1), for the purpose of developing a method of simulating the function of a low molecular weight compound by peptides, using as the lead compound, Cbz-Phe-Phe-His-NH{sub 2}, which is the minimum active manifestation unit having a macropharge migration stimulating activity, various conversions were tried with the aim of improving the activity, revealing that the activity changed greatly by the conversions. Dehydroalanine-containing tripeptide derivatives, which were synthesized on the basis of the result of a molecular design by computer, showed 1,000 times more activity than the lead compound. In (2), experiments for forming a crystal thin film of peptides were conducted using a pattern forming fixation process of peptides by a photo-reactive cross-linking reagent and by means of an organic crystal growth multiple beam apparatus. (NEDO)

  5. FY 1980 Report on research and development of plant related to Sunshine Project. Final report on commissioned researches; 1980 nendo sunshine keikaku ni kakawaru plant kenkyu kaihatsu itaku kenkyu kanryo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1981-03-31

    Reported herein are the FY 1980 results of research and development of the plant for hydrogen production by electrolysis of water at elevated temperature and pressure, as part of Sunshine Project. The 4 Nm{sup 3}/h hydrogen production test plant, constructed in the previous year, is equipped with a data acquisition system, safety and protective devices, and emergency power monitoring system, and operated for testing performance at high current density, vapor/liquid separation effects, and electrolytic solution concentration changes. Of the electrodes tested, the electrode of ultrafine nickel particles with expanded surfaces, developed by Government Industrial Research Institute, Osaka, has exhibited the highest efficiency of approximately 90%. The tests for plant development include the tests of a 900 mm class air-tight insulation tester, development of a double-polarity plate mold with irregular surfaces for the electrodes, development of self-propelling valves on a trial basis, improvement and development, on a trial basis, of electrodes and diaphragms, and acceleration tests using a galvanic corrosion tester. Researches on metallic constituent materials include corrosion tests by an autoclave, constant-load type tester and low strain rate type tester. (NEDO)

  6. Achievement report for fiscal 1998. Research and development of ceramic gas turbine (Reliability verification test for ceramic members); 1998 nendo ceramic gas turbine no kenkyu kaihatsu seika hokokusho. Ceramic buzai no shinraisei kakusho shiken

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    For a ceramic gas turbine to achieve efficiency of 42%, materials capable of withstanding approximately 1300 degrees C are required. In fiscal 1998, the mechanism of creep deformation and life prediction are studied, with specimens exposed to a short-term high-stress conditions equivalent to a time to fracture of 1000h. It is known after studies in the past that, under a stress of approximately 240Mpa, the logarithmic values of the load stress and time to fracture may be described by two differently inclined straight lines. Strain is accurately measured by use of a CCD camera for the determination of a creep curve, and then stress indexes are worked out. It is then found that the stress indexes are 4 on the lower stress side of 260MPa and 11 on the higher stress side of the same. This enables the extrapolation of short-term creep fracture data for the prediction of long-term life. No large-scale reduction in resistance to creep due to changes in the crystal phase is not predicted. Longitudinal sound wave speeds are measured, and the result manifestly describes how the longitudinal sound wave speed slows down with the progress of creepage in the material. Reference is also made to international reports about the study of ceramics performance tests and evaluation methods, international joint studies about mechanical properties tests, and the international round robin test of material powder. (NEDO)

  7. Fiscal 2000 report on result of R and D on robot system cooperating and coexisting with human beings. Development of energy conservation technology; 2000 nendo ningen kyocho kyozongata robot system kenkyu kaihatsu seika hokokusho. Energy shiyo gorika gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-06-01

    Introduction of a number of robots and consumption of a large amount of energy are unavoidable if a complicated process operation is to be carried out by robots in an extensive work site. Great energy conservation is contrived by developing robots applicable to manufacturing in performing a variety of operations in place of human beings and thereby reducing the number of robots to work. This paper explains the fiscal 2000 results. For dual-handed cooperative tasks, a function was examined capable of gripping an object without giving a humanoid robot an instruction of an exact gripping position. A method was designed to prepare a command for the other arm through a command for one arm, with torque impedance control employed for the purpose of avoiding damage due to collision. A study was conducted on a three-dimensional shape detecting model using a visual device of a robot. In grasping problems of balance control of a humanoid robot, the behavior of a robot consisting of multi-links was considered as behavior of inverted pendulum, with possibility checked for the stabilization of the balance. For the purpose of putting the virtual robot platform previously developed to practical use, a three-dimensional operation tool of run-time user interface was developed, with research conducted on the sophistication of robot application. (NEDO)

  8. Achievement report for fiscal 2000 on operational research of human cooperative and coexisting (humanoid) robot system. Operational research of humanoid robot system; 2000 nendo ningen kyocho kyozongata robot system un'yo kenkyu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    This paper reports the achievements in fiscal 2000 in the operational research of humanoid robot system. Carrying out the development smoothly and efficiently requires accumulation of the operational know-how in both of the periodical check and maintenance and the aspects of hard and software to maintain the functions and performances of the robot platform having been developed in the previous fiscal year. Checks were given on fitting of the fasteners and connectors, batteries, and sensors. Operations were confirmed and adjusted on the liquid crystal projector of the surrounded visual display system for remotely controlled operation, polarization filters, screens, reflector mirrors, and wide viewing angle cameras. Verifications were made on fitting of the arm operation force sensing and presenting system, checks on the mechanical components, and operation of the driving system, whereas no change has been found in the operation for the period of one year, and sufficient performance was identified for the remote robot operation. The virtual robot platform has presented no crash and impediments during erroneous use in the disks of the dynamics simulator and the distributed network processing system. (NEDO)

  9. FY 1998 Report on research and development project. Research and development of human-cooperative/coexisting robot systems; 1998 nendo ningen kyocho kyozongata robot system kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This R and D project is aimed at development of the human-cooperative/coexisting robot systems with high safety and reliability, capable of performing complicated works cooperatively and in a coexisting manner with humans in human working and living spaces, in order to help improve safety and efficiency in various industrial areas, improve services and convenience in manufacturing and service areas, and create new industries. The trend surveys cover humanoid robot systems, remote control systems and simulators, and the application surveys cover services for humans, basic humanoids and entertainment communication. The 1998 R and D efforts include research and development, fabrication and surveys for the following themes; (1) fabrication of robot platforms for supporting manual works, (2) development of surrounded visual display systems, (3) development of robot arm manipulation and force displaying systems, (4) development of a dynamic simulator, (5) development of a distributed software platform, (6) researches and development of computation algorithm for kinematic chain dynamics, (7) development of motion teaching system for multi-functional robots, (8) investigation of trends in robotics technology, and (9) researches and surveys of robot application. (NEDO)

  10. Achievement report for fiscal 1999 on specified international cooperative research project. Research on anthropometry using computer mannequin; 1999 nendo computer mannequin ni kansuru jintai model no keitai suitei gijutsu no kenkyu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Studies are conducted about anthropometry using a computer mannequin for assessing the compatibility of virtual commodities and environments, fabricated by CAD (computer-aided design) or the like, with human beings, and the fiscal 1999 achievements are compiled. In the study of multidimensional equations of correlation for shape estimation, calculation of basic human model dimensions using 43 measurements has become feasible. For the construction of a human model using a computer mannequin, joint positions and distances between joints have to be determined using data which are measurements that cover human model surfaces. Such necessitates a study of shape estimating algorithm, and a basic physique calculation module and a shape estimation module have been developed. Verification is conducted using a computer mannequin, and it is found that much information is quantitatively determined prior to the manufacture of real goods, the said information involving the mechanism of a chair and the behavior of a human being in it, and the relations of the human behavior with peripheral equipment. (NEDO)

  11. Fiscal 1996 report on the results of the research to support the commercialization of recycle technology, etc (for public). 1; 1996 nendo Shine Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Recycle gijutsu nado jitsuyoka shien kenkyu seika hokokusho (kokaiyo). 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The environment/recycle issue is a task to be urgently tackled on the appropriate response to the increasing amount of waste and the treatment of hazardous materials including it. Therefore, the development and demonstration of recycle technology, etc. are conducted for acceleration of the commercialization. The R and D of fiscal 1996 is outlined below. In technology to create new demand such as recycle products, basic plans on the following were worked out and the detailed design was commenced: the use of waste plastics as materials of blast furnace, use of waste wood as board and use of waste bedclothes as RDF. In the demonstrative experiment on expansion of the glass bottle cullet utilization, the detailed design of the following was commenced: reutilization of cullet to light weight materials/construction board, development of mobile cullet production equipment, automatic selection unit of crystallized glass. To smoothly make information exchanges between makers and the recycle industry, the basic concept was studied in terms of database items. In the R and D of paper sludge board, selection of extruder for manufacture was examined, and the frame was trially manufactured for analysis of components of the board trially made and study of mechanical properties. The basic data were obtained. 43 figs., 34 tabs.

  12. Fiscal 1997 report on the results of the research on the development of high-performance industrial furnaces. Volume 3; 1997 nendo seika hokokusho (koseino kogyoro no kaihatsu ni kansuru kenkyu seika hokokusto)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    A R and D was conducted for the purpose of developing remarkable energy conservation/CO2 reduction technologies. In fiscal 1997, the five working groups about the following were formed to have animated discussions: the basic research, heating furnace, heat treatment furnace, melting furnace, and tubular heating furnace. The research subjects are the pursuit/deepening of the base study on flame structures in high temperature air combustion, critical heat recovery of the system in high temperature air combustion, examination of the basic common technology on the ultimate optimization of the material heat transfer, construction of general-purpose experimental database, setting-up of design standards for general-purpose high-performance industrial furnaces, presentation of examples of the actual trial design based on the design standards and feasibility study of the practical application, preparatory support of the field test project on high-performance industrial furnaces for commercialization/diffusion/spread, etc. Further, how to arrange the developmental results was studied to make the results of the project useful for study of the prompt commercialization. 442 refs., 1444 figs., 311 tabs.

  13. Basic research on energy conservation in developing countries. Report of the International Conference on Adaptation and Mitigation Technologies for Climate Change; Hatten tojokoku energy shohi koritsuka kiso chosanado jigyo. Kiko hendo ni kansuru tekio kanwa gijutsu kokusai kaigi hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The International Conference on Adaptation and Mitigation Technologies for Climate Change was held based on the 1st Conference of the Parties in 1995 of the United Nations Framework Convention on Climate Change, and the 2nd evaluation report of the Intergovernmental Panel on Climate Change (IPCC). This report carries the outline of this conference and minutes. Japanese government had studied the framework of activities implemented jointly (AIJ) for emission control of greenhouse gases by voluntary workers jointly with developing countries. The government decided the basis of the AIJ Japan program in 1995, and approved the evaluation guidelines of this program including confirmed and considered matters which are necessary for government offices related to this program to evaluate and approve each project. IPCC approved the 2nd evaluation report in its general meeting in 1995. This conference was thus held to discuss strategic technology and international cooperation with participation of writers of the 2nd IPCC report, policy planners of Asian countries, Japanese industries, governmental offices and NGO.

  14. Fiscal 1997 report on the cooperative research on the preservation and sustainable utilization of biological diversification; Seibutsu tayosei hozen to jizokuteki riyo nado ni kansuru kenkyu kyoryoku (1997 nendo hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Cooperative researches were conducted between Japan and Thailand, Indonesia and Malaysia for the purpose of the technology development to make developing countries themselves preserve bioresources existing in tropical forests and use those sustainably. The research subjects for Thailand are a strategical study on eating of the primates, improvement of a microorganism culture collection system, preservation of biological diversification using an artificial ecosystem, bioresource utilization, etc. The subjects for Indonesia are a study of a microorganism culture collection system, study of plant preservation technology, study of microorganism utilization technology, study of plant utilization technology, promotion of the founding of the Indonesia tropical bioresource information center, etc. The subjects for Malaysia are biological diversification database and gene bank, assessment/monitoring of the ocean ecosystem, assessment and inventory of the ecosystem using hi-tech technology, search/separation of bioactive substances originated from microorganism/plant, etc. 26 refs., 24 figs., 81 tabs.

  15. Achievement report for fiscal 1998. Research and development of synergy ceramics (Development of technology for energy use rationalization); 1998 nendo seika hokokusho. Shinaji ceramics no kenkyu kaihatsu (energy shiyo gorika gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The aim is to create inorganic materials with their functions well harmonized and with their reliability remarkably improved, and efforts are made to establish basic technologies with which structural control may be carried out simultaneously for multiple layers in in-process products through positive utilization of various chemical reactions in the materials synthesizing process. This fiscal year's achievements are stated below. A low-temperature pressure nitriding method is developed in which nitriding reaction directly involves the metal aluminum compact for conversion into ceramics, and an aluminum sintered body is produced capable of high thermal conduction of not less than 170w/mk with the original compact shape retained. By a heat treatment in a high-temperature pressure nitriding atmosphere, a success is attained in producing a silicon nitride ceramic body enhanced (150w/mk) in thermal conduction. It is clarified that the microwave-aided selective heating technology works effectively in enhancing the particle growth rate in a liquid-phase sinter system, and a success is won in increasing strength by virtue of the formation of particle-growing particles. (NEDO)

  16. Fiscal 1997 report on the results of the international standardization R and D. International standards for computers/manikins; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Computer manikin ni kansuru kokusai hyojun kikaku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Through the development of computer manikins (CM) which assess human adaptability to products and environments, a draft for international standardization was worked out to propose to ISO. A draft for the international standardization was presented to ISO through a development of `a structure model` changing based on human attributes, a study of `a motion model` enabling changes in posture and movement, a study of `an evaluation model` evaluating attainment ranges and ecodynamic loads, and a development of `computer functions` realizing the above-mentioned functions. The development of CM having the following characteristics: a function to reproduce `the structure model` based on the ISO7250 human body dimensional measuring values which were regulated in items for the human body dimensional measuring, a function to change posture/movement based on the joint movable range data, a function to evaluate geometrical human adaptability such as attainment ranges. As a plug-in to Autodesk Mechanical Desktop 2.0, the above-mentioned functions were realized, and the modular structure platform was constructed which enables the wide-range cross-industry option and functional expansion by the advance of CM. 7 refs., 41 figs., 18 tabs.

  17. Achievement report for fiscal 1996 on the research and development of human sensory measurement application technology. 2. Subject; 1996 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu seika hokokusho. 2. Honronhen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    In relation with fatigue indexing basics in the study of physiological sensation indexing technologies, an indexing system prototype is built, covering muscular fatigue due to a restrained working attitude and mental fatigue due to the load of psychological activities. Features of each fatigue/alertness stage are analyzed, and the time-dependent correlations between the change in psychological quantities and the combined physiological change is also analyzed. In the study of environmental compatibility indexing, color temperatures of office interior, amenity, and spatial dimension indexing are taken up. The impression of office space is analyzed. Highly reliable technologies in pursuit of psychological sensation are established, and efforts are made at indexing environmental compatibility by analyses of physical quantities affecting psychological sensation, and of brain waves. Test methods for habituation to noise are discussed, and relations between the sensations of habituation and fatigue/obstruction are quantified. In relation with product compatibility indexing technologies, products' compatibility with operator's attitude, the line of sight, and loads on human beings is evaluated. Discussed also is the application of the indices involving physiological sensation, environments, and product compatibility to products for daily life and to the designing of living and working environments. (NEDO)

  18. Achievement report for fiscal 1996 on the research and development of human sensory measurement application technology. 1. Outline; 1996 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu seika hokokusho. 1. Gaiyohen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    In the study of basic technologies for indexing the degree of fatigue, an indexing system prototype is constructed, involving muscular fatigue due to a restrained working attitude and mental fatigue due to psychological activities. A small oxygen meter is completed and evaluated, capable of quantifying intracorporeal oxygen. In the study of fatigue/alertness standardization, a common-use subjective evaluation method is utilized for scaling mental activities load and local physical load, and physiological data are accumulated. An analysis is conducted into the features of each of the fatigue/alertness stages, and time-dependent correlations are analyzed between the changes in fatigue/alertness-related psychological quantities and the combined physiological changes. In the study of environmental compatibility indexing, the comfort of an office space is indexed by use of technologies for determining psychological sensation. Relative to noise, relations between the sensations of habituation and obstruction are quantified. Conversion into indices of friendliness of products toward workers (relative to working attitude, line of sight, etc.) is also mentioned. Some applications of the physiological sensation index and environment/product compatibility index for the establishment of index systems for household commodities and living/working environments are discussed. (NEDO)

  19. Achievement report for fiscal 1998 on the research and development of human sensory measurement application technology. 1. Outline; 1998 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu seika hokokusho. 1. Gaiyohen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    On the basis of the result of an analysis conducted for typical working conditions, indexing is proposed of combined fatigue/alertness impacts on physiology. Efforts are made to standardize measuring systems and to develop measured values into a database. Programs are developed for standardizing techniques of measuring on the free declaration basis the impression generated by things and space and for supporting such techniques. Structural impression models are constructed. From the relationship between the visual psychological/physiological quantities and the physical quantity of texture, a visual quality index is derived for textile goods. An index expression is developed into a formula in relation with habituation to noise and sensation of fatigue. Application cases are expanded in which the indices involving physiological sensation, environments, and product compatibility are reflected on the designs of daily-use commodities and living/working circumstances, and new data are accumulated. A data base model and a perspiration-capable mannequin is completed which estimates man's sensation upon exposure to heat. A common subjective technique of stress evaluation, an advanced technological infrastructure for fatigue indexing, and an experiment of respite environment-related cases with human sensation indices applied thereto are mentioned. (NEDO)

  20. Report on the field test project for wind power development at Shinwa-no-Sato Park (wind characteristics investigation); Shinwa no sato koen ni okeru furyoku kaihatsu field test jigyo (fukyo seisa) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    Wind characteristics are observed for a year at Shinwa-no-Sato Park, Kirishima Town, Aira-gun, Kagoshima Prefecture. The average wind speeds at 20m and 10m above ground are 3.9m/s and 3.3m/s, but they are a little higher in the prevalent directions of east and east-north-east, and are 4.7m/s and 5.5m/s. The annual operation rates of the 150kW, 300kW, and 750kW wind turbine models are 36.0%, 39.1%, and 55.5%. Their annual capacitor ratios are 12.4%, 14.9%, and 15.0%. The annual wind direction occurrence rate on the wind axis is as high as 70.6% in the direction of west, and it should be highly evaluated that turbulence intensity is 0.3 or less in all the directions. As for the surroundings, the observation station is situated in a park which contains no residential zone that may cause noise-related troubles, and possibilities are quite low of difficulties entailing electromagnetic wave emission. Accordingly, wind power development at Kirishima Town is not impossible. But, before a wind power system is actually introduced into the park, it is necessary to select a wind turbine which can operate on low wind speeds of 1-3m/s and can easily connect to the commercial line in the interconnection scheme. (NEDO)