WorldWideScience

Sample records for chosa hokokusho fukushi

  1. Report on the comprehensive investigational research (at-home welfare apparatus system); Sogo chosa kenkyu (zaitaku fukushi kiki system) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    An investigational study was conducted on the research and development of an at-home welfare apparatus system. In this study, a stay experiment was carried out on whether aged or handicapped people can easily live in welfare houses into which at-home welfare apparatus was integrated, using high-tech at-home nursing apparatus systems (welfare techno house: WTH) which were installed at seven places in Japan based on `the development of a system supporting independent excretion.` In addition, the following were conducted: experiments on at-home welfare apparatus in terms of the evaluation of performance/operability/safety, physical physiology reactions, nursing burden/estimate of independence, two-way communication, examination of housing environments, etc. In WTH Chofu, a test on evaluating welfare apparatus was conducted by people with limbs paralysis and healthy case workers. In WTH Sapporo, by a working group studying biological information, examinations were made on the situation of standing up of healthy adults, old people and people with paralysis of one side of the body from various types of chairs, beds, wheel chairs, portable toilets and sitting down on them. An examination was also made on harmony with psychological function and physically adaptable function by a working group studying at-home nursing apparatus. 75 figs., 15 tabs.

  2. Fiscal 1996 report on the committee for international collaborative research of medical and welfare apparatus; 1996 nendo chosa hokokusho (iryo fukushi kiki kokusai kyodo kenkyu jigyo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    From a viewpoint that cancer, cerebral hemorrhage, heart disease, etc. caused by the progress in aging are problems not only to Japan but to all developed countries, a possibility of Japan`s joint study with other countries was examined to promote efficiently and effectively research/development of the apparatus required. Moreover, from a viewpoint of being the same Asian countries, a possibility of the joint study was examined also with developing countries which are largely different in disease structure and environment of the use of apparatus from developed countries. In the examination on medical/welfare apparatus technology of China, before the site examination, a book of data was arranged on the actual state of population and disease structure and the R and D situation of medical/welfare apparatus in Japan, and at the same time, celebrated persons in China were introduced by the scientific society side as widely as possible. By this preliminary study, the original objective of the examination could be achieved. In the examination with the U.S. and Europe, Japan held meetings with engineers of the U.K., France and the U.S. Japan`s `load control type walking supporting apparatus,` of which the development was finished, was very highly evaluated by each organ of the countries

  3. Report for fiscal 1998 on the international joint research project of medical welfare equipment; Iryo fukushi kiki kokusai kyodo kenkyu jigyo 1998 nendo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    In connection with the international joint research project of medical welfare, a report was made on the results of the investigation conducted in 1998 concerning the technology of overseas medical welfare equipment. In the investigation of china, observation was made on the actual state of the representative medial institutions, with opinions exchanged. Obsolete equipment and old technology are the present state in China, which is strongly desirous of exchanging information with Japan. In Taiwan, being full of venture spirit, an ultrasonic thermal treatment apparatus and an ultrasonic echo device have been produced for example. In Europe, an observation tour was conducted on a German manipulator and process robot while an investigative visit and exchange of opinions were made on the living environment and facilities in Italian training center for physically handicapped persons. Japan's self-supporting and assisting system for excretion attracted many questions and comments. In the investigation in the U.S., views were exchanged concerning '{sup 13}C-MRS device for non-invasion brain metabolic measurement' in research institutions such as universities. A machine developed in Japan received a high evaluation in that {sup 13}C spectrum was obtained from a substantial depth. (NEDO)

  4. Fiscal 1998 survey report. Welfare equipment (Development of human friendly care support intelligent equipment / Development of home welfare equipment system); 1998 nendo chosa hokokusho. Fukushi kiki (human friendly kaigo shien chino kiki kaihatsu / zaitaku fukushi kiki system kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Since disabled persons increase with a progress of an aging society, while a care power decreases with a decrease in birth rate, development and practical use of the welfare equipment contributing to self-support of aged and handicapped persons, reduction of doctors' or therapists' burdens, and as a result, reduction of medical care costs are desirable. Among them, R and D and practical use are expected of the advanced welfare equipment and system based on human engineering technology contributing to improvement of lives of aged and handicapped persons, and support of nurses and cares of disabled persons. In fiscal 1998, on both human friendly care support intelligent equipment and home welfare equipment system, this project clarified essential technical issues based on the future view, selected some themes to be newly developed in the future, and surveyed and evaluated the details of their R and D concretely. For the former, 'heart disease diagnosis and treatment total support system,' and for the latter, 'body function rehabilitation support system' were surveyed. (NEDO)

  5. Survey report for fiscal 1998 on the survey and study on basic information needs for development of welfare goods; 1998 nendo fukushi yogu kaihatsu kiban joho needs chosa kenkyu chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    With an objective to make clear the basic information about aged and handicapped persons requiring welfare goods upon the development thereof, this survey performed a questionnaire survey to business entities performing design, development, improvement and fitting of welfare goods. The questionnaire survey selected 879 business entities involved in manufacture and sale of the welfare goods. The effective reply recovery rate was 19.3%. The questions had the data contents required by products classified into body dimensions, motion capability, sensory functions, and work capability, asking to state data contents required for each item, reasons for the needs, and data sources. The data source currently utilized reveals that most of the replied enterprises utilize data derived from the company's own measurements, developments and experiences. The contents thereof indicate that the data are too old, the data contents do not match the current situation, and no required data are available. In designing, developing and fitting the welfare goods, the required data may not necessarily be obtained, whereas improvement in the database is strongly desired. (NEDO)

  6. FY 1998 annual report on the compilation of database of experts for development of welfare equipment. Surveys for collecting information of institutes supporting, e.g., welfare equipment research and development; 1998 nendo fukushi yogu no kaihatsu ni kakawaru senmonteki chiken wo yushita jinzai database no kochiku chosa hokokusho. Fukushi yogu kenkyu kaihatsu nado shien kikan joho seibi chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    In order to promote supply of high-quality, inexpensive welfare equipment, the data about public testing and research institutes throughout Japan are collected for their organizations, research themes, expertized areas, relations with welfare equipment, future activity guidelines and the like, and expert employees, so that enterprises can have adequate advises from them, when they plan to start researches on and development of related equipment. Information was obtained by means of questionnaires returned back from a total of 127 institutes related to industrial testing and researches, and 61 institutes, e.g., rehabilitation centers, deeply related to welfare equipment. This reports compiles information on 48 institutes which are conducting researches or the like on welfare equipment. The compiled lists of the local institutes supporting welfare equipment research and development activities describe, e.g., their total expenses, numbers of technical experts, conditions of windows responsible for welfare equipment or the like, percentages of expenses related to welfare equipment on total expenses, percentages of numbers of technical experts responsible for welfare equipment on total numbers of technical experts, and major research themes on welfare equipment. (NEDO)

  7. FY1998 report on a survey related to joint utilization of welfare device development data using an international network; 1998 nendo kokusai network ni yoru fukushi kiki kaihatsu data no kyodo riyo ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A survey was made in relation with joint utilization of welfare device development data using an international network. Developing welfare devices requires data from ergonomic and medical systems, while the cope of the objects is wide, and the kinds are various. For proliferation of welfare devices, system compatibility evaluation including that on using environment is important, including living environments that are different by countries. The present survey has identified how data for aged, handicapped and help-needing persons are accumulated and utilized in research organizations in America and Europe for both of the ergonomic and medical areas. The survey also investigated major academic societies in overseas countries, and collected database and academic network information that support the advanced research and development. At the same time, investigations were also made on organizations and corporations who are moving forward the efficient data utilization. Welfare device and service information providing systems in Japan were investigated to compare them with the trends in other countries. Conceptions and methods were compiled to utilize data internationally and jointly. Database models for device development were considered, and a proposal was made on structuring a research and development supporting database, and the operation method thereof. (NEDO)

  8. Investigational research on welfare equipment needs/seeds adaptation; Fukushi kiki needs seeds tekigo chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    At the advent of the aging society, investigated are images of welfare equipment to be developed. In the range where the use of welfare equipment is to be studied, the following are included: self care, excretion, transfer, and support of work other than care, as assistance to daily life; exercise function, communication function, and environment arrangement, as assistance to social participation. Of the images of the welfare equipment classified by the overall evaluation, the following are cited as what supports daily life: a lift usable even in the existing houses, a bump remover by which bumps in the house are removed without making large repairs, a urine collector for females, a training device to prevent urinary incontinence, reduction in the bed-fast elderly, a device to prevent bedsore, a system for safely watching demented old people, a system in which clothes are automatically washed, dried, and hanged on a hanger, etc. What supports social participation are a system for sports experience by virtual reality, sound user interface, etc. For the aged to be healthy physically and mentally, it is essential to be taken good care of and create things to live for by participating the society. For this, it is necessary that the government establish the public policies and that a people be conscious of welfare. 9 figs., 33 tabs.

  9. Fiscal 1997 report on the investigational research on intelligent social infrastructure technology; 1997 nendo chosa hokokusho (chiteki shakai kiban kogaku gijutsu no chosa kenkyu hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper first described an aim and outline of intelligent social infrastructure technology, summed up the system of social infrastructure and the situation in Japan in terms of the structure, lifeline, moving bodies such as railroad and automobiles, communication, security, and maintenance. Considering this present situation, the paper next described a concept of the intelligent social infrastructure technology to be newly constructed and a course of the development. Besides, as subjects required to study for the development of intelligent social infrastructure technology, it reported on risk management, methods of definition/collection/transfer/supply of information, infrastructure applicable at emergency, normal/emergency dual course system, privacy, robustness, and additionally the problems to be caused pertaining to architecture/civil engineering, traffic, security, communication, etc. when the infrastructure develops as a social system. Moreover, as element technology, the intelligent system related technology and data communication technology were described in detail. Examples of the research project were also reported. 101 refs., 70 figs., 42 tabs.

  10. Fiscal 1997 report on a feasibility study of international joint researches in the Asian region; 1997 nendo chosa hokokusho (Asia chiiki kokusai kyodo kenkyu kanosei chosa (4)hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    It is thought that the energy consumption in Asian countries with ASEAN and China as center will a marked growth also in future together with a rapid economic growth, but harmony with environmental problems and economic growth is being taken as a serious problem. This is an important issue also to Japan from viewpoints of secure energy supply and regional response to the environmental issue. Accordingly, strongly desired is positive response to global environmental issues and promotion in development/spread of new energy/energy conservation in these countries. For the spread of the technologies, actual construction/operation of plants by joint researches with Japan are effective from aspects of personnel raising, technical improvement, PR effects, etc. This is also helpful for Japan in terms of technological development because Japan can also get the unobtainable data from the operation under appropriate conditions. This is a report on the studies of the trends of global environmental problems in Thailand, Indonesia, Malaysia, the Philippines, India and China. 3 figs., 72 tabs.

  11. Fiscal 1995 geothermal development promotion survey. Natural environment survey report; 1995 nendo chinetsu kaihatsu sokushin chosa. Shizen kankyo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    In Candidate C area for the geothermal development survey, the natural environment was surveyed and `the secondary landscape assessment` was summed up in which places proposed for drilling of large-size wells and for construction of power generation facilities are extracted and a simulation of the landscape is conducted. The area for survey is the Shiramizu-gawa region in the south of Lake Akan, Akan-cho, Akan-gun, Hokkaido. The field survey was carried out about three items of landscape, plants and animals during the June-November period, 1995. As to the flora, diverse florae including vegetation unique to alpine areas, wetlands, and fumarole surrounding areas were found in the region, which is covered with summer-green broad-leaved forests or mixed forests of coniferous and broad-leaved trees. As to the fauna, faunae inhabitant of the highly natural forests were found including black woodpeckers and mountain hawk eagles. As a result of studying the places proposed for geothermal development from the above-mentioned survey, two places were picked up in the west of the survey area, where geothermal development is comparatively less influential in the natural environment and landscape and there is a high locational adaptability. 19 refs., 56 figs., 49 tabs.

  12. Investigational report on the trend of measures for global warming; Chikyu ondanka taisaku doko chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    To know the trend of measures taken for global warming, conducted were overseas surveys, participation in academic society meetings, and literature surveys. The phaseout time of all ozone depleting substances responsible for the ozonospherial destruction was determined for both developed and developing countries in the 7th Meeting of countries which concluded the Montreal Protocol. As information on measures for protecting the ozonosphere, introduced was activities under United Nations Environment Programme (UNEP). New fluorine containing ethers were introduced as cleaning solvent which causes no ozonospherial destruction and is low in global warming index. Toxicity data were obtained on HFC-236ea and HFC-236fa which are promising substitutes in HCFC foaming and refrigerant fields. The paper introduced an outline of the 1st Meeting of countries which concluded the Framework Convention on Climate Change held in 1995. According to the report on the National Institute of Public Health and Environmental Protection of the Netherlands, the amount of emission of fluorine containing greenhouse effect gas (in CO2 conversion) reached 8-14% of all the amount of greenhouse effect gas emitted in 1990 unless the control is reinforced. An outline of the TEWI-3 project was introduced which is useful for comparing effects of substitution technologies on global warming. 14 refs., 11 figs., 29 tabs.

  13. Report on the analytical survey of the Pacific energy information; Taiheiyo energy joho bunseki chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Arrangement, investigation and analysis of an energy information exchange system were conducted, with the aim of coping with the development in the whole Asia/Pacific area, the stabilization of energy supply/demand, and the environmental problem and of realizing effective cooperation of every country in the area. Concerning the trend of the domestic primary energy supply/demand, there are some patterns. Countries which show high growth rates are developing countries such as Thailand and China, and NIES such as Korea and Taiwan. Countries where growth rates are slowing down and lowering are developed countries such as Australia, Canada, Japan and the U.S. Countries where energy supply/demand is not stabilized are Singapore, Hong Kong, Indonesia and Chile which are suffering from variations in import/export. The ultimate energy consumption is the domestic primary energy supply from which the conversion loss in the conversion sector was deducted, and indicates almost the same trend as the primary energy supply. It is divided into a stabilized type of developed countries and a rapidly increasing type and a stagnant type. However, there are some exceptions. Total data in the quarter of the year cannot be the yearly data by itself, but requires a year-end tax arrangement. 40 tabs.

  14. Research report on human media; Human media no chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The human multimedia technology corresponding to users` subjective characteristics was researched to realize information environment producing a sense of unity with human. The human media technology realizes a human sensitive information processing model and a common database easily acceptable sensitively by various users. This technology also should be able to fairly accept and transmit individual`s information and knowledge as multimedia information, and in addition it is required to supply a virtual space with presence. In fiscal 1995, the research committee studied the concrete developmental issue for integrating these advanced fundamental technologies, and as practical images planned the prototype systems such as human media interactive plant operation, supply of environment supporting personal intelligent activities, and virtual medical center. The research committee also discussed development of space mobile media to secure energy-saving and safety of automobiles, and an environment simulation system with participation of many people. 34 figs., 2 tabs.

  15. Research report for establishment of NEDO vision; NEDO vision no sakutei ni muketa chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Because of an increase in energy demand due to economic growth and industrial structure change in the Asian area and its effect on global environment, the economic evolution harmonizing with energy and environment (3E) of the Asian area is required. The role of Japan, in particular, NEDO for achieving such 3E was studied from an international viewpoint. The following are thus surveyed: The history of energy demands, economic growth, an increase in energy consumption and their effect on global environment in the Asian area, and the policies, measures and future plans of Asian countries corresponding to the above situations. The role of NEDO is first of all R & D of biomass toward practical use, and development of effective use technology of biomass energy. Positive approach to control of CO2 emission and immobilization of CO2 is also required in industrial and traffic fields. As technology transfer from Japan, promotion of joint researches and establishment of an economic support scheme are expected together with transfer of the basement technology and training. 79 figs., 13 tabs.

  16. Report on an analytical survey on the Pacific energy information; Taiheiyo energy joho bunseki chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    For the purpose of collecting and arranging energy information in the Asia and Pacific region, this survey has been conducted for many fiscal years. The Asia and Pacific region is classified into the Chinese area, the Southeast Asia area including Brunei, Indonesia, the Philippine, Singapore and Thailand, the East Asia area including Japan, Korea, Taiwan and Hong Kong, the North America area including the U.S. and Canada, and the Oceania area including Australia and New Zealand. As to the primary energy supplied from 1980 to 1993, China largely increased its share by 3.1%. The Southeast Asia also increased its share by 2.1%, and the East Asia by 2.5%. To the contrary, the North America area largely declined its share by 7.8%, but still has approximately 60% in the Asia and Pacific area. By kind of energy, coal increased the share while oil decreased. 16 figs., 7 tabs.

  17. Investigational study on the development, production and wide spread of welfare apparatus in north Europe; Hokuo ni okeru fukushi yogu no kaihatsu seisan fukyu ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    For the purpose of grasping the present situation of the development/production/spread of welfare apparatus in north Europe, an investigation was conducted paying visits to Sweden and Denmark. Basically in the Swedish policy for handicapped persons, disablement is defined not only as features which belong to each individual, but as problems arising when the environment surrounding each individual touches one another. Moreover, characteristics of their policies on welfare apparatus are that major welfare apparatus can be provided for the disabled free of charge, and that the government and public organs play a major role in each step of the development, evaluation, distribution and provision of welfare apparatus. Features of the market of welfare apparatus are that users and buyers of the apparatus are different persons, that a public corporation called SUB participates in determining selling prices, etc., and that the market reflects needs and requests from users comparatively naturally. The needs for welfare apparatus at the Research Institute of Handicapped Persons are grasped through opinion exchanges with groups of handicapped persons or information exchanges with the technical aid center. 3 refs., 11 figs., 10 tabs.

  18. Achievement report on research and development of medical and welfare equipment technology. Optical tomographic imaging method; Iryo fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho. Hikari danso imaging system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-11-01

    The aim is to develop a method of processing oxygen concentration distribution in human organs into an image by computed tomography using near infrared rays capable of transmitting through living tissues. Since the photoabsorption spectra of hemoglobin etc. in blood vary according to the degree of their oxidation, an oxygen concentration level is determined by measuring the magnitude of the variation. In the imaging method named in the title, the object is irradiated with picosecond-level near infrared pulses from all directions successively, the pulses after transmission through the object are measured at all directions at a picosecond-level time resolution, and the distribution of pulse scattering and absorption characteristics are subjected to algorithmic calculation, the outcome is converted into oxygen concentration levels, and an image is obtained. A 64-channel time resolution measurement system is constructed, and is applied to living tissue models (phantoms) and animals, and an image is obtained and evaluated. On the basis of the result, a patient is examined for clinical evaluation, and an image reflecting the distribution of variations in hemoglobin oxygen concentration is obtained for the head of the adult patient. A spatial resolution of 1cm is achieved in case of a phantom 10cm in diameter. In the case of 64 channels, measurement takes approximately 20 minutes and mapping image data measurement takes approximately 7 minutes. (NEDO)

  19. FY 1997 report on the field survey on country situations including efficient energy consumption. Vietnam; 1997 nendo chosa hokokusho (energy shohi koritsuka nado chiiki josei genchi chosa). Vietnam

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Field survey was made on the current state of and issues on energy in Vietnam. In Vietnam, firewood is in wide use as non-commercial energy, and sums to a half of total energy consumption. Other energies such as hydroelectric power, petroleum, natural gas and coal are self-sustainable. Commercial energy consumption in 1995 is estimated at 10,070,000t in oil equivalent, which is broken down into 23% for coal, 42% in oil, 5% for natural gas and 30% for electricity. Abundant water resources will form the mainstay of future electric power supply. Commercial production of oil started in 1986 becoming an oil exporting country. Several promising natural gas fields were discovered as the result of the exploration by foreign capital. Coal deposits are estimated to be nearly 3.5 billion tons, and most of them are anthracite. Electric power demand is growing at a higher rate than the economic growth of Vietnam. The growth rate of electric power demand is set to be 1.3 times that of GDP. Since construction funds for new plants cannot be satisfied with the national budget and domestic investment alone, the country is expecting foreign capitals. 21 figs., 36 tabs.

  20. Research report. Environmentally friendly energy community research business for Yumesu district, Osaka Port; Osakawan Yumesu chiku kankyo chowagata energy community chosa jigyo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A study is conducted on an energy supply infrastructure for introducing a cogeneration system into the Yumesu district, which is a key point for the development of Osaka City, so that environments suitable for the 21st century will be formed and sustained. In the study, plural heat supply systems are discussed for the district. Taken up also are the possible utilization of heat from the waste incineration plant to be constructed on the neighboring Maisu island and of hitherto-unexploited energy sources such as seawater and the sewage treatment plant whose construction is now under consideration. Findings are that every method under study achieves an energy-saving rate of 5% and that the introduction of an urban type power plant will obtain the best result marking an approximately 22% energy-saving rate when its exhaust heat is effectively utilized. The order remains the same when their environmental features are surveyed, with the urban type cogeneration system holding first place with a NOx reduction rate of 37.7%. When it comes to economy, however, the method of effectively utilizing the exhaust heat from cogeneration power plants installed at consumers' marks the best result, this attributed to the low cost of pipe laying in the district. (NEDO)

  1. Fiscal 1998 research report. Feasibility survey on offshore wind power generation in Japan; 1998 nendo chosa hokokusho. Nippon ni okeru yojo furyoku hatsuden no donyu kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This survey studied the feasibility of large-scale offshore wind power generation in Japan. Attempt was also made on preparation of outline maps of offshore wind around Japan. The cost of future offshore wind power generation systems is roughly dependent on technical issues and environmental issues. As technical issues, 'installation site,' 'foundation,' 'system interconnection' and 'maintenance/management' were summarized based on applications in Europe. As a result, it was clarified that technical issues can be solved with existing technologies to a certain extent, however, those relate to economical problems closely. The previous environment impact assessments say that wind power generation has no problems on the environmental issues. As relatively strong wind coastal areas, the outline maps of offshore wind point out Western Hokkaido area, Japan Sea area of Tohoku district, Pacific ocean area of the central part of Honshu, Genkai Nada area, Western Kyushu area and Southwest islands area, and suggest that these areas are promising for offshore wind power generation. (NEDO)

  2. Survey report on a new energy vision establishment in Gushikawa City (a survey on the initial phase); Gushikawashi chiiki shin energy vision sakutei chosa hokokusho (shoki dankai chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Discussions were given on the new energy vision at Gushikawa City in Okinawa Prefecture. The energy demand in Gushikawa City is estimated as 829.3 billion 73 million kcal, which is about half of the national average per population. By departments, the consumer department has a very large demand of about two times as much as the national average, while the demand in the industrial department is as low as about 38% of the national average. The energy demand by kind is in the order of electric power, gasoline and heavy oil. With respect to energy supply, the Okinawa Electric Power Company Gushikawa Power Plant supplies 561.60 billion kcal. The expected new energy availability is estimated as 47087 x 10{sup 3} kWh/year by solar energy power generation, 7174 x 10{sup 3} kWh/year by wind power generation, 1662 kWh/year by ocean wave power generation. Wastes energy availability is estimated as 74990 x 10{sup 6} kcal/year in the sum of general and stockbreeding wastes energy. Specific plans discussed introduction of solar energy power generation and small wind power generation systems to primary and middle schools, gymnasiums, urban area redevelopment projects, coastal parks, street lights, low-temperature warehouses, prefectural hospitals, and multi-purpose welfare centers. (NEDO)

  3. Fiscal 1998 research report. Survey on energy consumption in a residential sector; 1998 nendo chosa hokokusho. Minsei bumon energy shohi jittai chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    On energy consumption in a residential sector, the report reports the document survey result including new documents, and the result of the systematic national questionnaire survey carried out in small and medium cities to prepare the basic data for future development and introduction of petroleum substituting energy. The electric power consumption rate of detached houses (A) is larger by 0.6- 1.6Gcal/household/year than that of apartment houses (B) in every district. The gas consumption rate of A is smaller than that of B in Hokkaido, Kanto and Kyushu. The LPG consumption rate of Kinki district is largest in both A and B. The kerosene consumption rate of A is larger than that of B. In Hokkaido, the kerosene consumption is extremely large in heating, showing a ratio of 60% or more in A. In the other districts, the kerosene consumption is largest in hot water supply, showing 30% or more. Every consumption rate increases with annual household income. The average consumption rate of 4 districts is 11,137Mcal/household/year. (NEDO)

  4. Research report. Environmentally friendly energy community research business (Minami-guchi District, Sapporo Railway Station); Sapporoeki minamiguchi chiku chosa hokokusho. Kankyo chowagata energy community chosa jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Feasibility of commercialization is discussed of an environmentally friendly heat supply system for the above-named district. The research centers on the configuration and optimum dimensions of heat source equipment for a large-scale cogeneration-aided district heat supply system to be selected for introduction into the district. Discussion is made about the energy efficiency and environment preserving features of a system selected for employment. A study is then conducted on a plant consisting of two high-efficiency 4800kW gas turbine cogeneration systems and heat storing water tanks. Such when introduced will contribute to the levelling-off of urban power loads and to the enhancement of power peak cut through the utilization of cogeneration system-generated power and midnight power. When the exhaust heat from the cogeneration system is fully exploited, the system will achieve an energy saving effect approximately 9% higher than that exhibited by separately functioning heat source systems. Furthermore, CO2 will be reduced by 20% or more, NOx by 45% or more, and SOx by 46% or more, as compared with separately functioning heat source systems. The conclusive evaluation is that the above-selected system will sufficiently contribute to the preservation of environments. (NEDO)

  5. Basic research report on regional new energy vision drawn up for Saga Prefecture; Sagaken chiiki shin energy vision sakutei chosa hokokusho (kiso chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The need of new energy introduction is found in matters relating to energy security, resources depletion, environmental problems, and the construction of distributed energy sources. The total amount of new energy in the prefecture is 4,859,052Gcal (525,301kl in terms of crude oil), which occupies approximately 30% of the energy that the prefecture demanded in fiscal 1996. Out of the said new energy, those from the sun, wind, ocean, and small- and medium-scale water systems may be acquired in the form of electric power, and they add up to 3,615,424MWh (3,109,265Gcal in terms of calorific value, 336,137kl in terms of crude oil) and occupy 64% (including industrial wastes) of the whole amount. As for the percentage of each type of new energy, solar energy is the highest, its amount of 2,973,679Gcal (321,479kl) occupying 61.2% of the whole, followed by the energy from wastes whose amount in total is 695,131Gcal (75149kl) occupying 14.3%. The possibility of introduction of new energy is studied and the conclusion is described for each energy type, district, and sector (residential and commercial, industrial, transportation). The respects on which prudence should be exercised in introducing new energy are also discussed. (NEDO)

  6. Research report of fiscal 1997. Basic research on joint implementation for preventing global climate changes; 1998 nendo chosa hokokusho. Kyodo jisshi kiso chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Research was made to promote Activities Implemented Jointly Japan Program. Joint Implementation (JI) is the methodology for preventing global climate changes by collaboration of countries. The countries take cooperative actions for reduction, absorption and fixation of greenhouse gases, and effectively distribute the reduction credits among relevant parties. This was decided in the first session of the Conference of Parties (COP) held in March, 1995. In COP3, Japan`s assigned reduction amount in 2008-2012 was determined as 6% of the emission level in 1990. The protocol defines JI between parties as dealings of emission reduction units, and JI between developing countries as clean development mechanism. The rules for a base line and credit distribution are necessary before full-scale implementation. Although JI is regarded as an important cost-effective project, it is important to decide where and how the JI projects should been promoted. The present state and issues of the primary approved project of Japan Program are arranged. In particular, various terms related to developing countries remain to be solved. 21 figs., 32 tabs.

  7. Research report of fiscal 1997. Basic research on the commercialization of innovative energy technologies; 1997 nendo chosa hokokusho. Kakushinteki energy gijutsu no jitsuyoka ni kansuru kiso chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper summarizes the research result in fiscal 1997 from the basic research results on the commercialization of innovative energy technologies. The target of a photovoltaic power generation market includes isolated power sources (several kWp) for distant places or developing countries, and those (several tens kWp) for personal residences or public facilities. Although the former is mainly promoted in the West, while the latter over the world, their profitability is unsolved. Power plants over several hundreds kWp are in demonstration test. Solar heat power generation of several tens to hundreds MWp is most profitable, however, small-scale one is poor in feasibility. Australia takes an interest in distributed photovoltaic power generation directly connected with actual lives of residents, and has a dominant opinion that desert is useless as large-scale site. This country lays emphasis on protection and maintenance rather than positive use of desert based on a basic cognition that desert is easily changed and broken. The Australian government announced power company`s obligation to use renewable energy by 2%, and a strong organization is scheduled to be newly established. 59 figs., 57 tabs.

  8. Report on survey of promotion of activities implemented jointly in China in FY 1997; 1997 nendo chosa hokokusho (Chugoku ni okeru kyodo jisshi katsudo no suishin chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Rapid economy growth has been observed in Asia including Japan. On the other hand, problems of population and environment grew even worse with the economic growth. Especially, China is the second CO2 emission country in the world. Large energy demand is still forecasted with its economic growth in the future. It is well-known that the energy consumption per unit GDP is very large. Therefore, it is very significant to promote the activities implemented jointly with China for mitigating the emission of greenhouse gases including CO2, which provides a significant meaning for solving global environmental issues as well as for improving regional environmental issues. It is necessary for the above to recognize the appropriate current situations and to promote the activities implemented jointly suitable for the country. Based on the discussions and information exchanges about environmental issues with staffs concerning environmental policies and scientists as well as the field surveys, methods for the activities implemented jointly were investigated to provide some proposals. 4 figs., 8 tabs.

  9. Leading research and study report for fiscal 1998. Report on leading research and study on intelligent fiber; 1998 nendo sendo chosa kenkyu hokokusho. Inteligent fiber sendo chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Researches were conducted with a view to organizing projects for developing intelligent fibers, equipped with environmental friendliness and amenity without being deprived of their original properties as structural and clothing materials, the ultimate goal of the effort being the creation of harbingers of next-generation fibers which would contribute to the advance of industries related to environments, medicine and welfare, and information. What were learned from fiscal 1998 researches are mentioned below. The strength that the general-purpose fibers currently in use exhibit is so small as to be but several percent of what is theoretically predicted for them. Demand will increase a great deal if the actual strength is doubled, for which new technologies have to be developed including those involving super-fiber texture control. For providing the fiber with such functions as environment-friendliness, amenity, etc., it is necessary to develop phasal structure control technologies with regard to fiber morphology, surface texture, etc. For success in practical application in the future of such super-fiber materials, each specimen needs to be manufactured in the order of kilogram by way of trial. Moreover, fiber evaluation techniques have to be developed in the three domains of software, hardware, and interface. (NEDO)

  10. FY 1997 report of survey on the intellectual property in international collaboration research project; 1997 nendo chosa hokokusho (kokusai kyodo kenkyu ni okeru chiteki zaisanken ni tsuite no chosa hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In promoting international collaboration research project, coordination of the patent system of each country which participants to the project belong to has broad implications in concluding the contract for the project. For example, in Japan, 100% of the patent belongs to the government for contrast or collaboration project with the government. While, in the USA, the patent developed by the private company belongs to the private company even for the contrast project. In Japan, the shared patent can not be transferred to the third party or implemented without agreement with the partner. While, in the USA, the shared patent can be transferred to the third party or implemented without agreement with the partner. Due to such a difference, some projects can not be established by ill coordination of intellectual property even when the meaning of the projects is well understood. In this survey, was investigated the outline of patent systems of major countries to study about what should well balanced treatment of intellectual property in international collaboration research project be in the future. 4 figs., 8 tabs.

  11. Fiscal 1997 survey report on the trend of global warming protection measures of substituting freons; 1997 nendo chosa hokokusho (daitai freon no chikyu ondanka taisaku doko ni kansuru chosa hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The trend survey was conducted of global warming protection measures by participation in international conferences, scientific society meetings and lecture meetings, and by literature surveys. We participated in the international conference on ozonosphere protection measures. In the 9th meeting of the nations which concluded the Montreal Protocol, the strengthening of restrictions on methyl bromide was decided on. In the UNEP solvent technology selection conference and the OORG conference of the World Bank, reports were made on substituting solvents in Japan, activities supporting developing countries, and the developmental trend of urethane use foaming agent. In the international conference on ozonosphere protection measures, introduced were the present status of Japan`s ODA for developing countries and examples of success of the substitution in the solvent field. The paper included nine reports on CFC destruction technology related literature made public in the past one year. The paper also introduced a comparative study of de-HCFC substituting technology at U.S. Oak Ridge National Laboratory, U.S. EPA`s prediction of emission of fluorine 3 gas, the predicted value of HFC emission and trial calculation of contributing rate in all greenhouse gases by IIR, Green Peace and Elf Atochem, and NOAA`s measured data on SF6 in the atmosphere. 49 refs., 46 figs., 26 tabs.

  12. Fiscal 1995 investigation on biological fixation of carbon dioxide; 1995 nendo seibutsuteki CO2 kotei ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    To cope with the global warming caused by CO2, an investigation was conducted into biological fixation. It is necessary to make a many-sided and comprehensive study on the mechanism of CO2 fixation, the scale (area and carbon holding density), the rate and the environmental impact of the introduction of the technology and the technical problems, and to make a quantitative evaluation of each of the methods in order to make them practical proposals. The global ecosystem is classified into the land biota and ocean biota, and each typical ecosystem was surveyed in terms of the surface area, the carbon holding amount (presently existing amount), the net primary production amount, the required nutrient salt amount, the transpiration rate, etc. Next, a discussion was made on the increasing effect of the carbon fixation amount by changing the present ecosystem from the aspect of scale and rate. At the same time, a study was carried out of energy efficiency, economical efficiency and problems. Last, elementary technology was taken up which seems to be important for implementing measures for the biological carbon fixation. As to the ocean, it is necessary to obtain information, which is not sufficient to utilize marine biota for CO2 fixation, especially on the mechanism of depth-direction transfer of organism and its quantitative grasp. As to the land, one of the measures is conversion of the ecosystem where the amount of carbon fixed is small to the ecosystem where the amount is large. 249 refs., 58 figs., 51 tabs.

  13. Geothermal development promotion survey. No.A-1. Haneyama area; Chinetsu kaihatsu sokushin chosa hokokusho. Haneyama chiiki

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    The result and evaluation of the geothermal development promotion survey in the Haneyama area were summed up. The geothermal development promotion survey in the Haneyama area was conducted in the area of approximately 300km{sup 2} of Kujuu-machi, Oita prefecture to make extracts through the ground survey and well survey of the high earth temperature abnormal zone in the north of the Houhi geothermal zone. The ground survey included the geology/alteration zone survey, density survey, geochemical survey, and electromagnetic survey. From the result of drilling six holes for the heat flow rate examination and the existing test boring data, the earth temperature distribution within this survey area was outlined. In the structural test boring survey, a maximum temperature of 140.6{degree}C was recorded at a depth of 1045m. The result of this survey indicated that the CL-SO4 type hydrothermal system in the Noya-Mizuwaketouge area probably extends near the south of Fukumayama. However, since the storage temperature is estimated at approximately 140-195{degree}C, the hydrothermal system is not expected to be used as resource for the steam power generation, but for the binary power generation. 98 refs., 144 figs., 92 tabs.

  14. Fiscal 1998 geothermal development promotion research report on the environmental impact in Akinomiya district. Hot spring, water level, spring water fluctuation; 1998 nendo chinetsu kaihatsu sokushin chosa Akinomiya chiiki chosa kankyo eikyo chosa hokokusho. Onsen, suii, yusui hendo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-09-01

    This research was made for investigating the impact of geothermal development on hot spring, ground water level and spring water by drilling 3 investigation wells N9-AY-3, N9- AY-4 and N9-AY-5 in Akinomiya district. Some research items for hot spring showed slight fluctuation until 1997, however, those showed no fluctuation due to drilling of the 3 investigation wells in fiscal 1998. These results suggest that drilling of the investigation wells has no effect on the spring and quality of hot water in Akinomiya district. Drilling of N9-AY-4 well is carrying out continuously after Sept. 1998. Fluctuation of ground water levels was dependent on precipitations, however, drilling of the 3 investigation wells has no effect on the ground water level. These results suggest that drilling of the investigation wells has no effect on the spring of hot water in Akinomiya district. Every research item for spring water showed relatively slight fluctuation stably. These results suggest that drilling of the investigation wells has no effect on spring water in Akinomiya district. (NEDO)

  15. Fiscal 1997 survey report. Feasibility study of the environmentally friendly type coal utilization system (survey of the coal utilization in Pakistan); 1997 nendo chosa hokokusho. Kankyo chowagata sekitan riyo system kanosei chosa (Pakistan ni okeru sekitan riyo gaikyo chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper made a literature survey, hearing survey, site survey/study on the coal in Pakistan such as the coal utilization system and the environmental situation, etc., and aimed at pre-examination for the survey of the introduction of the environmentally friendly type coal utilization system to be planned in Pakistan in the future. The examination, data collection and preparation were conducted in terms of the following items: the structure of coal consumption in energy supply, structure of coal consumption, mainly of domestic brown coal consumption, the situation of coal utilization by industry and by region, environmental problems caused by coal utilization such as air pollution, the trend of policies of environmental regulation, etc. The literature on the following was obtained and surveyed: the situation of economy/energy in Pakistan, coal utilization technology by industrial field, and environmental protection technology. The hearing survey was made to institutions concerned, corporation groups and men of learning and experience. Site surveys were conducted for the typically selected coal utilization equipment and existing environmental protection equipment. 66 figs., 56 tabs.

  16. Research report of fiscal 1997. Basic research project on energy saving in developing countries (cooperative research on oil saving / basic research on the industry of Thailand); 1997 nendo chosa hokokusho. Hatten tojokoku energy shohi koritsuka kiso chosa nado jigyo sekiyu shohi koritsuka kyoryoku chosa (Taikoku sangyo kiso chosa hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Field research was made for oil saving in Thailand. To promote energy saving in a textile industry as main export industry, its motivation for production stuff is essential in business improvement. Proposal for work improvement, supply system of bonuses, and small-group activity are effective. Management of an energy consumption rate is essential in business management. Use of efficient waste water treatment equipment is also one of the issues. In food factories, various scopes for improvement are still found by mass/heat balance analysis in production process. As an example, a large amount of water is consumed in vain for washing raw rice in a rice powder factory, and separation of SS precipitate from waste water should be improved. Because of lagoon treatment, an effluent standard is not achieved in spite of consumption of wasteful aeration power. This treatment is reasonable because of its scale and site, although the standard can be achieved by activated sludge method. Reconsideration of the standard is also necessary based on a local total BOD load capacity. The profitability of a methane fermentation method should be examined. 72 figs., 95 tabs.

  17. Achievement report for fiscal 1999 on research and development of technologies for medical welfare equipment. Rehabilitation system for upper limbs and lower limbs; 1999 nendo iryo fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho. Shintai kino rihabiri shien system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-05-01

    This project aims to develop physical function measuring and training systems equipped with a variety of feedback utilities and widely applicable to the prevention of the elderly from physical function degradation, to the preservation of physical functions, and to their recovery from mild physical difficulties, thereby helping the elderly enjoy independence and participation in social activities. Possibilities will be studied of providing them with engineering support in the field of exercise therapy through the analysis of the characteristics of old people's movement, and the findings will be applied to the designing and assessment of welfare and nursing equipment and also fed back to their development environment. In the gait training system, the suspension force is adjusted according to data from the force plate and various position sensors, and the system produces an effect similar to that of walking in the water. The lower limb rehabilitation system facilitates the treatment of the aged or handicapped people, and patients suffering from cerebral disorders, at any of their physical positions from lying to standing. The upper limb training support system is to provide motivation for the aged or handicapped people suffering from mild difficulties in their upper limbs. In this fiscal year, basic designs have been prepared for the gait training system and the lower limb rehabilitation system, and a preparatory survey is conducted for the upper limb training support system. (NEDO)

  18. Fiscal 2000 achievement report on the research and development of medical and welfare apparatus/technology. Home rehabilitation system for aphasia patients; 2000 nendo iryo fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho. Shitsugosho zaitaku rehabilitation shien system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-05-01

    In the effort to develop an authoring system for assistance programs, a self-training system to enhance home rehabilitation, a remote rehabilitation evaluation/diagnosis supporting system, and a communication assisting system, the systems developed in the preceding fiscal years were customized and, together with their operation manuals, introduced to seven hospitals and subjected to evaluation. The results were analyzed, and improvement centering on the ease of operation was carried out. Various development efforts were exerted to improve on what were strongly demanded. As for the aphasiac/caregiver interface, it was distributed to every hospital concerned. There was a demand for immediate introduction, and then the interface was developed into a practical tool to satisfy the demand. This enabled aphasiac patients to receive training stimuli effectively through various sense organs. (NEDO)

  19. Achievement report for fiscal 1999 on research and development of technologies for medical welfare equipment. Home rehabilitation system for aphasia patients; 1999 nendo iryo fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho. Shitsugosho zaitaku rehabilitation shien system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-05-01

    Element technologies under development involve (1) an authoring system for assistance program processing, (2) self-training system for supporting home rehabilitation, (3) human interface for aphasia patients and caregivers, (4) remote rehabilitation evaluation and diagnosis supporting system, and (5) a communication assisting system. Under item (1), a material incorporating interface, training contents layout and combination function, and general-purpose interface specifications are determined, and a one-piece system is designed and developed. Under item (2), a self-training player that behaves in compliance with the authoring specifications is designed and developed. Under item (3), a secondary unit is fabricated on the assumption of its use at an actual treatment scene. Under item (4), remotely controlled two-way face-to-face communication, camera control, shared operation of a training player, training scenario transfer component, etc., are developed and, furthermore, a one-piece system is designed and developed to support the therapist's rehabilitation assessment and diagnosis in coordination with the above-mentioned remotely controlled functions. Under item (5), a network communication component and an auxiliary function using voice synthesis are added for designing and developing a one-piece system that enables long-distance communication between the therapist and patients. (NEDO)

  20. Achievement report on research and development of medical and welfare equipment technology. Meal delivery robot for carrying food trays to aged and disabled persons; Iryo fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho. Koreisha shogaishayo shokuji hanso jido robot system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-11-01

    Research and development of a mobile robot is carried out, who steers the meal distribution wagon, serves the meal at the bedside of aged or disabled people, retrieves the dishes when the meal is over, and then carry them back. The conditions discussed in the study for the robot to simultaneously satisfy are mentioned below. It should be of the size and weight fit for the job, avoid obstacles while travelling automatically and safely, behave at a safe and proper rate not jeopardizing the patient during the feeding process, communicate with the patient through picture and voice, and capable of acting without causing people to find in it anything overbearing or wrongful. The project began with the concept design process, which was followed by the basic design process, tentative manufacture of parts, tentative manufacture of components, and finally the construction of the whole. The developed robot system, after passing functional tests conducted in a mockup facility, experiences some period of tentative employment at three medical and welfare facilities. It is then confirmed that it safely performs a series of acts including meal serving and dish retrieving and that it is excellent in terms of autonomous self-control, safety, friendliness, and work efficiency. (NEDO)

  1. Result of R and D of medical welfare equipment technology in fiscal 1994. Part 6. Therapeutic training system for preventing incontinence of urine; Iryo fukushi kiki gijutsu kenkyu kaihatsu 1994 nendo seika hokokusho. 6. Nyoshikkin boshi kunren sochi

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-05-01

    A portable system was developed so as to prevent the urinary incontinence and enable the aged persons and patients to live their comfortable life. In the measurement of urinary volume, its correlativity with the change in impedance was confirmed with a small and light-weight prototype. As a result of improvement of the ultrasonic method, the measurement accuracy was heightened with miniaturization. The usefulness and safety could be clinically confirmed in the urination control by electric stimulation. Based on the above element technologies, the total system was then studied by interlinking the intravesical urinary volume measurement system and urination control system. Particularly for the patients of urgent urinary incontinence, an in vitro test was conducted with a system into which the electric stimulator was integrated. As a result, this system was good as a nursing system. Through an animal experiment on iontophoresis, the urination was known to be controllable with skin-permeating drugs. However, it was known that those drugs are pharmaceutically classified into the new DDS group by the Drugs, Cosmetics and Instruments Act. Therefore, the clinical application plan was partially revised for the present system using them and made to be a subject of future study.

  2. Load controlling walk aiding apparatus. Report on results of research and development on medical and welfare device technologies; Kaju seigyoshiki hoko hojo sochi. Iryo fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-01

    This paper reports a load controlling walk aiding apparatus developed by the Technology Research Association and the Medical and Welfare Device Research Institute under a consignment from NEDO. The development was purposed for physically handicapped people with remarkably deteriorated leg functions. This apparatus consists of a body trunk section with reduced size and weight, a reciprocating mechanism to facilitate moving out of a free leg, a stay varying mechanism to vary leg lengths, driving power supply and controls. The apparatus has realized smoother reciprocal walking motions than with conventional walk aiding systems by having the leg length of a free leg contract and extend matching with walking rhythms when the free leg is moved out. This paper describes the apparatus by dividing it into the following items: the course of research and development works (basic plans, execution of the research and development works, corporations taking charges, organizations, and committees), summary of the research and development (the summary of the developed system, and results of the walking tests), achievements (comparison of the targeted specifications with the results, practical usability, and commercial production), publicization of the research and the state of patent acquisition. 16 figs., 7 tabs.

  3. FY 1996 geothermal development/promotion survey. Report of hot water survey results (No. B-3 Kumaishi area); 1996 nendo chinetsu kaihatsu sokushin chosa. Nessui no chosa hokokusho (No.B-3 Kumaishi chiiki)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-01

    Reported herein are the survey results of hot water in the Kumaishi area, Hokkaido, as part of the FY 1996 geothermal development/promotion survey project. A total of 277 spouting guidance tests were conducted by the swabbing method for 10 days at the N7-KI-1 well, which, however, failed to achieve continuous spouting of geothermal fluid. A total of 144 swabbing tests were conducted for 8 days at the N7-KI-2 well. The geothermal fluid is spontaneously spouted out, although intermittently, after the main valve was opened, because it had a pressure of 4.1 kg/cm{sup 2} G at the mouth of the well from the first. However, the final self-spouting quantity remained unchanged in spite of the guidance works. The hot water had a pH 6.4, and contained Na as a cation at 8,940 mg/L and Cl as an anion at 14,500 mg/L as the major impurities. The associated gas was mainly composed of carbon dioxide, containing little hydrogen sulfide. The hot water spouted out through the wells contained Na and a high concentration of Cl as the major impurities, suggesting possibility of mixing hot water containing a high concentration of salt with surface water. It is considered that neither hot water nor its impurity concentrations are evenly distributed in the deep underground of the Kumaishi area. It is therefore considered that the deep underground hot water sources for hot spring slightly vary in composition and impurity concentrations. (NEDO)

  4. FY 1997 report on the research for construction of NEDO`s vision. Regional environment and international collaboration; 1997 nendo chosa hokokusho (NEDO vision sakutei ni muketa chosa kenkyu). Chiiki kankyo to kokusai kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    It is necessary for NEDO to transfer the energy technology to developing countries and conduct collaborations with them efficiently. First of all, environments of the community were analyzed from a viewpoint of natural environment, social and cultural environment, and industrial and economic environment. Then, this report outlines the organizations of domestic and international aid agencies which have potentials to conduct alliance and collaboration with NEDO, and also illustrates their activities including financing and technology exchange, regional activities, and progress of activities. Alliances and collaborations with NGOs of each international organization were analyzed on the aspect of the fields and know-how of alliance with NGOs, selection standards of NGOs and necessary systems and organizations to make effective alliance and collaboration with NGOs, and some case studies were taken. Organization, purposes and activities of NGOs in Asian countries are introduced, and their current situations are illustrated. Finally, some proposals were offered to make alliances and collaborations with aid agencies and NGOs. They are concerned about the fields and know-how of alliance with NGOs, selection standards of NGOs and necessary systems and organizations to make effective alliance and collaboration with NGOs. 44 figs., 8 tabs.

  5. Fiscal 1996 research report. International energy use rationalization project (Analytical tool research project for energy consumption efficiency improvement in Asia); 1996 nendo kokusai energy shiyo gorika taisaku jigyo chosa hokokusho. Asia energy shohi koritsuka bunseki tool chosa jigyo (honpen)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-10-01

    Under the project, an analytical tool applicable to the entire Asia-Pacific region is created. The tool enables the analysis of interrelations between economic/industrial activities and energy consumption in every country in the region, comprehension of the current status of energy consumption efficiency improvement, and analysis from a macroscopic viewpoint of trends in the Asian region as a whole, and thereby will contribute to the developmental enlargement of undertakings involving energy consumption efficiency improvement in the Asia-Pacific region. Based on 1990 Korean, Indonesia, Thai, and Philippine bilateral inter-industry relations tables, each vis-a-vis Japan, and energy input tables broken down by industry type and energy type, a database is prepared in which inter-industry relations tables and energy input tables are integrated. In conformity with the goals of the project, summaries are stated of the extraction of common classification, recombination of the Chenery-Moses inter-industry relations table, energy input table, and the CO2 emission table. It is found in a simulation that energy reduction in the four countries in 1990 amounted to 83,013 kilotons in terms of oil, equivalent to 25.7% of Japan's total endogenous energy consumption. It is suggested in the paper that the transportation department is the most important department for the industrial and energy-saving measures of the four countries. (NEDO)

  6. Fiscal 1996 report on the investigational research on the construction of a database of physical functions; 1996 nendo chosa hokokusho (shintai kino database no kochiku ni kansuru chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of realizing `the affluence` sought in the Japanese economic society, the supply and preparation of products, service and environments friendly to human beings seem to be important. In the future, the development of products which are fully considered also of aged and handicapped people is more expected than the conventional manufacturing of products added with value. Especially in accordance with the rapid aging, from a viewpoint that the lowering of physical functions caused by aging has an exactly close relation with the response to products and the environment, development of the database of physical functions for the aged which is useful for the design is urgently promoted. First, the data to be supplied for database were selected. As to the selection method, the data required for database were defined by collection/analysis of the existing data, examination of the needs of enterprise designers, and analysis of daily activities. In the study of the database, the structure by which data can be effectively supplied was studied and verified by pilot database for extraction of the subjects and solution to the problems. 6 refs., 57 figs., 26 tabs.

  7. Fiscal 1997 survey report on technology to reduce the amount of greenhouse gas emitted from automobiles; 1997 nendo chosa hokokusho (jidosha kara no onshitsu koka gas haishutsuryo teigen gijutsu no chosa). 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    As to intelligent transport systems (ITS), the paper views the outline of the R and D and diffusion in Europe, the U.S. and Japan and trially estimated the effect of reduction in greenhouse gas, and worked out visions/scenario for diffusion of ITS. As developmental fields contributing to reduction in greenhouse gas, the following were taken up: 1) AVCS (advanced vehicle control system), 2) automatic rates receiving system, 3) traffic management, 4) plans of operation management/allocation of commercial cars, 5) modal shift of the material flow, and 6) public traffic in passenger transportation. As effects by developmental field, 1) and 5) are especially effective. 4) is promising because of its easiness in introduction, and 2) is also a promising technology as a tool to introduce an electronic road pricing system on general roads in future in addition to the effect of reducing heavy traffic by its introduction to expressways. However, the higher the service level on the facility side becomes, the more the traffic demand amount becomes. By how to introduce ITS, it possibly occurs that improvement of the situation will not be made at all on the future vehicle traffic system. 38 refs., 42 figs., 52 tabs.

  8. Fiscal 1998 research report. Survey on R and D, and application technology of biotechnology; 1998 nendo chosa hokokusho. Bio technology no kenkyu kaihatsu, sangyoka gijutsu nado ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Survey was made mainly on use of biotechnology as resource saving and energy saving processes. Biotechnology is in wide use in a pharmaceutical field, while its application is on the increase in agriculture, food, chemistry, energy and environment fields. The USA is ahead of Japan and Europe. In the USA, there are more than 1000 ventures, and R and D of biotechnology, in particular, gene analysis and manipulation techniques are in progress together with acquisition of patents. In biomass energy, production of ethanol from corn, and development of biodiesel are in progress in the USA and Europe, respectively. Use of biomass should be promoted because of its global environment compatibility and sustainable productivity. In the future bio-market, genome analysis and its application are most important, however, Japan is behind in such technology in the world. The Joint approach by industry, university and government is necessary from the viewpoint of a future marketability and international competitiveness. Promotion of a public acceptance and nurture of creative talents are also important. (NEDO)

  9. Outline of investigation on restraint of carbon dioxide generation by green chemistry. 1999.1-1999.3; 1998 nendo green chemistry ni yoru CO2 hassei yokusei ni kakawaru chosa kenkyu chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Investigations were conducted into the above in some leading OECD (Organization for Economic Cooperation and Development) member states. Green chemistry is a new concept in which clean technology, environment-friendly chemistry, and the like are combined, and is a chemical solution for reducing or stopping the use or generation of materials, products, by-products, solvents, reagents, etc., which are dangerous to health and environments, throughout the whole life cycle of chemicals covering the processes of their designing, manufacturing, dumping, and recycling. In this fiscal year, the actual state of the generation of biomass, regarded as representative of reproducible materials, and its feasibility as chemical resources were investigated. In an effort at finding out chemical reactions safer to health and causing less environmental impact, investigations were also conducted into the recent trends of catalysts, novel reactions for organic syntheses, use of supercritical fluids, photocatalysts, biomimetic processes, etc. The development of substitutes for plastic additives was also studied. Since acceptance by the citizenry is quite important for green chemistry to take effect, educating and enlightening activities in the U.S., Britain, France, and Germany were inquired into. (NEDO)

  10. Survey report on the environment harmonizing type energy community survey project for the Izumizawa area in Chitose City; Chitoseshi Izumizawa chiku kankyo chowagata energy community chosa jigyo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A large-scale cogeneration system will be introduced into the air-front industrial complex in the Izumizawa area having large energy demand within the city of Chitose well blessed with natural environment. The system will utilize natural gas locally produced in the Tomakomai Yubarai area (the utilization produces 20% reduction effect of carbon dioxide emission even only from conversion from petroleum oil). At the same time, heat supply operation will be carried out meeting the heat demand in diversified consumer applications, such as air conditioning of ancillary facilities, hot water supply, hot bathing facilities, and snow melting. Business feasibility has been investigated and discussed. Discussions were given on gas engine, gas turbine, combined cycle, and steam jetting systems. Although the combined system was found most superior, other cases present no large difference excepting the turbine system. The system is a highly efficient energy saving facility (annually saving 3000 kiloliters of crude oil, worth for annual kerosene consumption by 1500 ordinary households in Hokkaido). It can largely reduce emission of carbon dioxide. Each case has large economic effect with the simply calculated number of years of return of investment being six to eight years. (NEDO)

  11. Fiscal 1998 research report. Survey on the current trend of private R and D efforts; 1998 nendo chosa hokokusho. Minkan no kenkyu kaihatsu doko no jittai ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For promotion of the R and D system of technologies creating new industries, this survey collected the basic data and information on the trend of private R and D efforts and industries, and arranged every data and information obtained. The data on United States, Germany, France and U.K. in addition to Japan were collected. Survey was made first on the administrative support system for private R and D efforts. The R and D-related budget, R and D support program and private R and D-related fund of Japan, United States and U.K. are mainly outlined. Survey was made next on private R and D activities. The R and D-related fund, researcher and patent of main countries are outlined in international comparison. Survey was also made on the current state of various industries. The industry scale and structure of every Japanese manufacturing industry are outlined. Finally, the industrial statistics are given concerning Japanese 'chemical industry,' 'communication-electronics-electric measuring instrument industry' and 'automobile industry' with a high rate of R and D-related expenditures. (NEDO)

  12. Fiscal 1997 survey report on a feasibility of international collaboration on bio-hydrogen R and D; 1997 nendo chosa hokokusho (bio suiso seizo gijutsu ni kakawaru kokusai kyoryoku kanosei chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    R and D of the production technology of biohydrogen is an option effective for the world energy supply technology and the world environmental preservation technology in the 21st century. At present, a project named `R and D of the environment harmony type hydrogen production technology` tackles the R and D of the hydrogen production technology using photosynthetic microorganisms, and promotes the R and D in this field from both aspects of a basis and application as seen in a workshop held including interchanges with researchers and research institutes overseas. With the recently increasing interest in bio-hydrogen production technology also overseas, search and bleeding/improvement of microorganisms related to the hydrogen production and utilization technology of biomass have been advancing. For development in this field, it is necessary to construct a widespread research network and promote the comprehensive research and development. In this survey, most of the research institutes visited recognized an importance of international cooperation in this field and agreed to make future research interchanges in a wide range. Based on the survey, a feasibility of concrete international collaboration is searched. 146 refs., 2 figs., 11 tabs.

  13. Survey report for fiscal 1998 on the survey on preparation of data collection related to new energy technology development (wind power generation ); 1998 nendo shin energy gijutsu kaihatsu kankei data shu sakusei chosa (furyoku hatsuden) chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    As a result of heightening consciousness on assurance of energy security and global environment problems in recent years, it is urged in Japan to promote development of technologies to introduce and proliferate new energies, and work on acceleration of the introduction. On the other hand, in order to move forward effectively the introduction promoting project intended of proliferation and enlightenment, it is necessary to put into order comprehensively and systematically the different data on the new energies, and summarize them as the basic data. This report, focusing on a wind power generation system, collects and puts into order the latest published data on the wind power generation system, placing in the center the introduction examples in Japan and other countries, supporting measures, wind power generation system markets, and the specifications of major windmills. The major contents may be summarized as follows: significance of introducing the wind power generation system, the current status of the market, policies in different countries, status of introducing the system in other countries, subsidy institutions for the introduction, the introduction flow, efforts made by government related organizations and local governments, a list of window offices of the related corporations, the fundamental knowledge, and the movements in 1998. (NEDO)

  14. FY 1998 geothermal development promotion survey. Report on the environmental effect survey (No. A-4 Kunbetsu-dake area); 1998 nendo chinetsu kaihatsu sokushin chosa. Kankyo eikyo chosa hokokusho (No.A-4 Kunbetsudake chiiki)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-09-30

    Of the FY 1998 geothermal development promotion survey, the primary environmental effect survey in the Kunbetsu-dake area was conducted, and the results were arranged. In the well drilling survey, etc., the survey was made aiming at extracting areas to be preserved from an environmental aspect. The results of the survey were summarized as follows: As to the mammalia, 12 families 46 species were confirmed in the area surveyed and the periphery by literature survey. Out of them, the noticeable species which are considered important from an academic viewpoint are 10 families 19 species. As to the aves, 55 families 340 species were confirmed, of which 29 families 79 species are noticeable species. About the amphibia/reptilia, 3 families 3 species in the amphibia and 4 families 6 species in the reptilia were confirmed by literature and hearing survey. The noticeable species is 1 family 1 species in the amphilia. Concerning the terrestrial insecta, 135 families 873 species were confirmed, and the noticeable species is 11 families 20 species. As to the flora, 115 families 1055 species were confirmed, and the noticeable species is 46 families 126 species. Relating to the living vegetation, the one higher than 9 in nature reserves shows a substantial rate, and the periphery of Kaibetsu-dake is designated as the specified flora colony. (NEDO)

  15. Report on FS survey for project of introduction of highly energy-efficient trolley buses into the Mexico Metropolitan Area in FY 1997; 1997 nendo chosa hokokusho (Mexico city eno sho energy gata trolley bus donyu project FS chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Traffic jam and air pollution by automobiles are currently getting severe in the Mexico Metropolitan Area. Trolley buses were introduced for improving the environment more than ten years ago. Vehicles become too old for use, and their energy efficiency is low. In this project, 200 highly energy-efficient trolley buses are introduced to replace old inefficient trolley buses, which results in the improved traffic convenience in the City and enhanced energy efficiency. The new energy-efficient trolley buses are made of energy-efficient control VVVF inverters produced and exported by MELCO (Mitsubishi Electric Corporation), energy-efficient motors by MELMEX (Mitsubishi Electric Corporation, Mexico), and bodies by MASA which is a major manufacturer of bus bodies. The objective of this research is to analyze the background of introduction of new energy-efficient trolley buses and the effects of the present project. The results of analysis are going to be utilized for future promotion of the Joint Implementation and Clean Development Mechanism. 30 refs., 30 figs., 24 tabs.

  16. Confirmation study of the effectiveness of prospect techniques for geothermal resources. Deep-seated geothermal resources survey report (Fiscal year 1994); 1994 nendo chinetsu tansa gijutsu nado kensho chosa. Shinbu chinetsu shigen chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Drilling and survey of deep geothermal exploration wells were conducted to grasp the existing situation of deep geothermal resource and the whole image of geothermal systems in the area where geothermal resource was already developed. In the drilling work in fiscal 1994, 4000m-class rigs and the top drive system were planned to be used for drilling of 12-1/4 inch wells, but 9-5/8 inch liners were used for drilling down to depths of 2550m or deeper since the amount of lost circulation is large and the withdrawal of devices may be very difficult. And in 8-1/2 inch wells, the well was drilled down to a depth of 2950m. As to the deep resistivity exploration technology using electromagnetic method, studies were made of a multiple-frequency array induction logging (MAIL) method, a vertical electromagnetic profiling (VEMP) method, a joint analysis method, etc. Concerning the synthetic fluid inclusion logging technology, containers were lowered into the well and a comparison was made between data of the homogenization temperature analysis of the formed fluid inclusion and those of the temperature log analysis. With relation to the making of deep geothermal structural models, revision was made according to the determination of depths of Miocene formations, Pre-tertiary formations, and the Kakkonda granite. 65 refs., 268 figs., 79 tabs.

  17. Survey report for fiscal 1998. Survey of trends of new CO{sub 2} fixation technology using bacteria and algae (II); 1998 nendo chosa hokokusho. Saikin sorui wo riyoshita atarashii nisanka tanso kotei gijutsu no doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The trend of technology is surveyed from a standpoint that, in the process of CO2 fixation using microbes for the production of useful substances, it is essential, in view of income/outgo balance and economy, to utilize their catalytic function. The survey centers about the feasibility of the utilization of organic wastes, cellulose wastes in particular, as an energy source. Special attention is paid to the energy of artificial light and laser beams. From a point of view that it is important to suppress cell multiplication and to effectively utilize only catalytic activity for the production of useful substances, the cell division mechanism of the Corynebacterium is analyzed, and the findings are compiled to facilitate the study as to whether the division may be controlled. A report is also prepared on the metabolic mechanism of a photosynthesizing bacterium that is judged to be the most promising species. Reference is made to aerobic and anaerobic bacteria. Shown are the organic compounds that are formed by CO2 gas fixation thanks to microbial or enzymatic reactions. To emphasize their importance as an energy source and to explain the conversion of biomass into useful substances, the technology and economy of conversion into fuel compounds are surveyed. The production of ethanol out of organic wastes is evaluated in the way of LCA (life cycle assessment). (NEDO)

  18. Fiscal 1997 report on the survey of effects of enhancement of energy consumption efficiency on the global environment; 1997 nendo chosa hokokusho (energy shohi koritsuka chikyu kankyo eikyo chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper surveyed the state of studying the measures against global warming in the third assessment report of the Intergovernmental Panel on Climate Change (IPCC) and made analyses of the trends of preventive measures for global warming in other countries, aiming at presenting data for studying the future enhancement of energy consumption efficiency in the Asia Pacific region. In the U.S., a report was taken up from Executive Office of the President which is entitled `the federal government R and D of energy for solution to problems in the 21st century.` The report made analyses of the federal government R and D of energy and at the same time recommended an increase in R and D budget and reinforcement of the organization of the Department of Energy. In Europe, the carbon tax, CO2 tax, energy tax, etc. are introduced or studied for reduction of CO2 emissions. OECD made public a report approved in May 1997 which is entitled `the environmental tax and green tax reform.` Also studied were the introduction and effects of the carbon tax aiming at reducing CO2 emissions in developing countries. More attention is being paid to economic effects predicted in case developed countries reinforce various kinds of measures for targeted reduction of greenhouse gases. 2 figs., 4 tabs.

  19. FY 1997 report on the research study for preparation of NEDO`s vision. Biomass energy; 1997 nendo chosa hokokusho (NEDO vision sakutei ni muketa chosa kenkyu). Biomass energy ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Research study was made on the current usage, technological development and future subjects of biomass energy. The current use of biomass energy over the world estimated to be nearly a billion t/y oil equivalent. This value is estimated to be only a part of a pure primary biomass yield of 73 billion t/y oil equivalent showing a large supply potential. The evaluation result of a biomass energy potential in the world by GLUE (Global Land Use and Energy Model) considering worldwide biomass flow and competition of land use showed that no change of land use form in advanced areas is predicted, and no production of new biomass energy from forests in advancing areas is also expected. Production of biomass energy from farm products is promising in advanced areas, while the potential of biomass residue is high in advancing areas showing the possibility of energy development. Development of new biotechnologies such as molecular control of bio-production functions is expected to increase biomass resources. 76 refs., 26 figs., 30 tabs.

  20. Fiscal 1997 report on the survey project on planning to execute `The New Earth 21`; 1997 nendo chosa hokokusho (`chikyu saisei keikaku` no jisshi keikaku sakusei ni kansuru chosa jigyo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Japan proposed in the Houston Summit the New Earth 21 to be carried out with technology development and technology transfer, and to make a concrete development of the project, Japan also proposed in the Tokyo Summit a TREE Plan for working out comprehensive strategies of the innovative technology development. In the CO3 Kyoto Conference in 1997, numerical targets for developed countries were determined which have legal binding force for control/reduction of greenhouse gas emissions in the term of 2008-2012. It was agreed to urge developing countries also to play a certain part in the project through the clean development. Therefore, the paper made quantitative analysis of important CO2 prevention technologies, technology transfer costs, and economical assessment by energy conservation. As a model, the DNE 21 model was upgraded and used into which CO2 prevention technologies, energy, economy and climate changes were integrated. In fiscal 1997, the following were carried out: collection of data on important CO2 prevention technologies and systems and analytical assessment using the DNE 21 model, CO2 reduction and selection of energy technology, assessment of energy system costs, construction of the unified DNE 21 model, and opening of the international workshop. 62 refs., 98 figs., 34 tabs.

  1. Survey report of FY 1997 on the application of plasma to advanced environmentally acceptable technologies. 2; 1997 nendo chosa hokokusho (kankyo chowagata gijutsu no kodoka eno plasma no oyo ni kansuru chosa). 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This report describes the latest technological trend of plasma which will be useful for a better global environment. Novel application field of plasma technology has been studied in detail. A definite research plan for a better global environment has been proposed. At first, current global environmental issues are reviewed, and the background and the purpose of present investigation are described. Then, are described the plasma generation, measurement and control technology, and the application of plasma technology for a chemical reaction, especially, the promising chemical reaction with highly sensitive and/or highly selective process. In addition, is reviewed the development of a multi-functional membrane using energy control technology of plasma particles, and an advanced catalyst made by plasma-based technology. Is also described the application of plasma to the fixation of CO2 and reuse of greenhouse gases such as CO2 and CH4. Are described the results of the study on capture and reuse of environmental pollutants. The contribution of plasma technology to the production process with low environmental load is provided. Finally, a research plan for plasma technology aiming at a better global environment is proposed on the basis of present investigation. 138 refs., 113 figs., 15 tabs.

  2. Fiscal 1997 survey report on the project on energy conservation by effectively using building energy in Indonesia; 1997 nendo chosa hokokusho (Indonesia ni okeru biru energy yuko riyo ni yoru sho energy ka project chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    As an energy conservation method for a model building, the following eight methods were selected and trially calculated of the effects. 1) adoption of high efficient illumination apparatus, 2) introduction of an illuminance control system, 3) cooling water secondary pump with invertor, 4) ventilation control for parking lots, 5) heightening of the established temperature, 6) improvement of the 24-hour run chiller, 7) elevator with invertor, and 8) introduction of the photovoltaic power generation. As a result, it was found out that energy was totally reduced by about 3,837.4 MWh/yr or 25.6%. If viewed from the amount of reduction in greenhouse gas, the amount of CO2 emitted from office buildings, approximately 0.22 million t-C/yr, decreases to approximately 0.16 million t-C/yr. Further, approximately 0.93 million t-C/yr, the amount of CO2 emitted from commercial use facilities such as office buildings, department stores and hotels is reduced to about 0.69 million t-C/yr, thanks to the effect of the project on energy saving buildings, which made a CO2 reduction by approximately 0.24 million t-C/yr possible. Validity of the project on energy conservation in Indonesia was confirmed. 2 refs., 55 figs., 38 tabs.

  3. Survey report of FY 1997 on the trends of novel CO2 fixation technology using bacteria and microalgae; 1997 nendo chosa hokokusho (saikin sorui wo riyoshita atarashii nisanka tanso kotei gijutsu no doko chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For this survey, the latest technology trends relating to microbial functions are summarized to recover and effectively utilize CO2, typical greenhouse effect gas, using microbial functions. Systematic survey and analysis are conducted concerning the microorganisms useful for fixing CO2, CO2 uptake mechanism during the microbial reactions, utilization methods of solar light and useful energy sources except solar light, highly efficient production of useful materials, and usage of produced useful materials. Research has concentrated on use of biological activities for this purpose through design of bioreactors using microorganisms (bacteria and microalgae) for efficient CO2 fixation. For the process to have net CO2 fixation as assessed by its life cycle and to make the process economically feasible, it is essential not only to fix CO2 merely in the form of biomass but in addition to convert it to useful materials by the catalytic activities of the organisms. Three categories were set for the survey, i.e., microorganisms with CO2 fixation ability, available energy for CO2 fixation, and target CO2 fixation products. 169 refs., 49 figs., 14 tabs.

  4. Fiscal 1998 research report. Survey on data collection for development of new energy technology (fuel cell); 1998 nendo chosa hokokusho. Shin energy gijutsu kaihatsu kankei data shu sakusei chosa (nenryo denchi)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report is composed of Part 1: the development trend of fuel cells in fiscal 1998, and Part 2: the collected data and appendices. Part 1 includes 4 chapters, (1) The outline of the development trend, (2) Stationary fuel cell, (3) The development trend of fuel cell vehicles, and (4) The development trend of small transportable fuel cells. The report newly includes the development trend of small-capacity fuel cells and the report on 1998 Fuel Cell Seminar notable as an international conference on fuel cell summarizing the trend of fuel cells in fiscal 1998, as compared with the fiscal 1997 report. Part 2 is the collected data on domestic and foreign demonstration operation results of fuel cells, and technical development of every fuel cell. In addition to various collected data on the whole of fuel cells and their use techniques, Part 2 includes the principle, features, system configuration, performance simulation technique, application and market analysis of fuel cells, and the national policy and concerned laws on a subsidy system for introduction of fuel cells, for example. (NEDO)

  5. Fiscal 1997 report on the survey of biological CO2 fixation using arid land and oligotrophic waters; 1997 nendo chosa hokokusho (kansochi, hin`eiyo kaiiki wo riyoshita seibutsuteki CO2 kotei ni kansuru chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This survey is aimed to investigate various measures to be taken for biological CO2 fixation, to synthetically study feasibilities of the measures from various aspects of CO2 fixation mechanism, scale, speed, and environmental effects and technical problems in case of introducing those, and to assess the measures quantitatively. In this fiscal year, a study was proceeded with of possibilities of carbon fixation by afforestation and that by fertilization into ocean. The paper defined significance of afforestation in arid land, and especially advantages in conducting researches in West Australia. Relationships were examined among afforestation, precipitation and topography. The result of the survey was described of water- and salt-transfer simulation methods. Studies of arid land were made in terms of photosynthetic speed, transpiration speed, soil characteristics, measuring methods for precipitation and vaporization amount, and the examples. Seven places of Leonora where water source and water quality were examined were selected, and the measuring results were described. The paper summed up the state of utilization of biomass energy obtained from forest and commented on a scenario on tree-planting. Finally, a possibility was stated of the carbon fixation by fermentation into ocean. 178 refs., 121 figs., 53 tabs.

  6. Research and survey report of FY 1997 on the CO2 balance for high-temperature CO2 fixation and utilization technology; 1997 nendo chosa hokokusho (nisanka tanso koon bunri gijutsu ni okeru CO2 balance ni kansuru chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The purpose of this research is to clarify the application condition and effectiveness of high-temperature CO2 fixation and utilization technology. To evaluate the present process, it was compared with others, such as separation using a polymer membrane, physico-chemical absorption process, adsorption process, hydrogen contact reduction process, and biological fixation. The development trends of absorption, membrane, adsorption, and cryogenic separation were investigated. The questionnaire was carried out about the separation technologies which are in the stage of performance test using actual gas, to arrange and compare the data and information. The current trends of chemical and biological CO2 fixation and utilization technology were also investigated for arranging the subjects. High-temperature CO2 disposal by the carbonation in concrete waste has been studied, to clarify its application conditions and effectiveness. In order to compare the separation technologies, treatment processes of CO2 in the exhaust gas from boilers of LNG power generation and coal fired power generation were simulated. These processes were simulated by ASPEN PLUS for the modeling. Trends of application of ASPEN PLUS and collection of information were surveyed by participating in the ASPEN WORLD. 103 refs., 51 figs., 55 tabs.

  7. Report on a commercialization fundamental investigation (in Batulicin Area, Indonesia) in relation to FY 1997 investigations on geological structures in overseas countries; 1997 nendo kaigai chishitsu kozo nado chosa ni kakawaru kigyoka kiso chosa (Indonesia Batulicin chiku) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    A fundamental coal mine development investigation was carried out in Batulicin Area, Kalimantan, the Republic of Indonesia. The investigation included ground surface surveys, preparation of topographical maps and geological maps, trial drilling investigation, physical logging, chemical analysis, and infrastructure investigation. The trial drilling investigation was intended to identify the existence conditions of coal beds and coal quality, and was performed by forming grids with about 500-meter interval, and using 21 trial drillings to depths of 104 to 240 meters for a total drilling length of 3463 meters. The physical logging included electric logging, radioactivity logging and pore size logging, and the trial drilling cores were subjected to chemical analysis. For infrastructures, investigations were carried out on necessity of modifying existing roads, privilege relationship, the current status of barge loading points, water depths, and land acquisition. The result of the investigation revealed that minable coal quantity in underground mining of the coal bed B would be 13.189 million tons, and that annual production of original coal at 733,000 tons would be possible by adopting a long-wall type mechanized coal mining system. 14 refs., 99 figs., 25 tabs.

  8. Survey report on the environment harmonizing type energy community survey project for the coastal area in the Kawasaki ward in fiscal 1998; 1998 nendo Kawasakiku rinkaibu chiiki kankyo chowagata energy community chosa jigyo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    In energy utilization in the 'Kawasaki Zero Emission Industrial Complex', optimal regional heat supply systems were discussed. The discussion was made from the viewpoints of introduction of saving-type energies, new energies and renewable energies, and environment preservation performance. The coastal area in the Kawasaki ward is planned of developing an industrial complex with an area of 8.4 ha for operation of about twenty companies. In the assumption of heat demand, four companies only were taken up as the object of the discussion, who utilize heat supply from steam as process heat source for their factories. The total heat demand quantity and heat demand pattern used for the discussion were assumed by hearing and actual record submitted from each company. Optimal systems were discussed on heat supply systems utilizing steam produced by steel mills, with the discussion made on waste heat recovered steam in processes and steam extracted from thermal electric power plants in the steel mills. As a result of the discussion, heat supply utilizing the steel mill steam was found capable of being provided with much lower price level as the estimated unit price than general direct steam supply, leading to a judgement that the system has business feasibility. (NEDO)

  9. Survey report of FY 1997 on the feasibility of microbial biotechnology for reuse of environmental pollutants; 1997 nendo chosa hokokusho (kankyo osen busshitsu no shigenka no tame no biseibutsu bio technology no riyo kanosei chi kansuru chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    An investigation was conducted with the aim of elucidating the foundations for effective utilization of environmental pollutants or unused resources which are likely to be causal substances of environmental pollutants, as resources, using biotechnology. Composting of agricultural waste, production of microbial mycelium proteins and microbial fermentation materials were suggested as main examples of effective utilization of unused resources by microorganisms. Selection of active microorganisms in the livestock waste, clarification of the mechanism of action and the establishment of treatment conditions are essential to new developments in this field. In the field of marine products industry, it was pointed out that the recycling of waste using microorganisms and enzyme treatment is the most promising approach to the effective utilization of resources. In the field of food industry, applications as the culture media for mushrooms, for enzyme production and for the production of physiologically active materials as well as fuel were clarified. Was also pointed out the significance of studies on the microorganisms and enzymes in resources containing cellulose, hemicellulose and lignin, and the waste from these resources, lignocellulose. Were also proposed the composting of household waste, methane fermentation, and fermentative production of organic acid and hydrogen from waste. Possibility and significance of fermentative production of organic acid from sewage sludge were suggested. 314 refs., 46 figs., 33 tabs.

  10. Research report for fiscal 1998 on the analysis of spread effect of technologies approved as international standards. Value web analysis and research; 1998 nendo kokusai hyojun ni ninteisareta gijutsu no hakyu koka bunseki chosa hokokusho. Value wave bunseki chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For contributing to the formulation of technology development programs, an analysis is conducted based on the concept of value web into which the economic spread effect is incorporated. As information technology plays an important role in the fields of automobiles and chemical materials, there are various fields the research and development efforts exerted in which are common to many others. As to what additional values are created when such separately developed technologies cross each other, a discussion is conducted using techniques of industry-oriented analyses. Findings obtained are mentioned below. When the numbers of essays relative to the respective industries are compared, it is found that 63% of the total number of biotechnological essays fall on agriculture, the drug industry, and the food industry. On the other hand, when it comes to the produce, related industries larger in marketing scale is more strongly influenced by the spread effect. The spread effect of biotechnology is distinguished in the drug industry, and that of information/communication technology in the information industry, electric and electronic industries, and in the semiconductor industry. (NEDO)

  11. Research report of fiscal 1997. Survey on creation of high-efficiency renewable resources, and bioconversion technology; 1997 nendo chosa hokokusho. Kokoritsu saisei kano shigen no sosei narabi ni bioconversion gijutsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Survey was made on material production technology using creation technology of high-efficiency renewable resources (photosynthesis reaction of plants). Industrially usable plant resources in overseas countries and Japan were arranged, and plant resources unused for food were also surveyed. The present state of genetic engineering necessary for metabolic engineering of higher plants such as fit and high-expression technology of genes, plant cell cultivation, and control technology of plant cell multiplication is described, and elementary technologies required for future gene-recombined plants are predicted. Survey was also made on the trend of creation technology of industrial plants for fat and oil, biodegradable polyester, amino acid, cellulose, fiber (cotton) and forest wood. A patent list on plant biotechnology was prepared, and study on bioconversion of plant resources was also surveyed. Overseas R & D trends on conversion and effective use technologies of renewable bio- resources are reported, and process design and its profitability were evaluated through a case study. 414 refs., 87 figs., 55 tabs.

  12. FY 1997 report on the survey of potential impacts of enlarging ASEAN on political and economic systems in South East Asia; 1997 nendo chosa hokokusho (ASEAN kakudai no Higashi Asia no seiji keizai chitsujo eno eikyo chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This report surveys potential impacts of ASEAN (Association of South East Asian Nations) on inter-ASEAN affairs and its external relations when ASEAN will enlarge its members to include all nations in South East Asia, and thus fully represent the region. For this purpose, the survey was conducted on Vietnam, Myanmar, Laos and Cambodia, which joined in 1995, from the viewpoint of their economic and political system, and their relations with other member countries. The nature of ASEAN has gradually transformed, in which all the countries in the region have increased and internal economic issues have been tackled. It has an aim to stimulate inter-ASEAN trade and induce foreign direct investment into ASEAN as a whole by reducing import duties on intra-ASEAN trade. Underlying in these, new development is a concern about growing economic and military power of China. ASEAN solidarity will work an leverage against China should change toward worse, and ASEAN will function as a regional stabilization factor. ASEAN is needed for the stability of both in economic and political order in East Asia. Japan has to further promote its cooperation with ASEAN to help its solidarity as an association. 24 refs., 21 figs., 25 tabs.

  13. Report on survey of international cooperation possibility on chemical CO2 fixation and utilization technology in FY 1997; 1997 nendo chosa hokokusho (kagakuteki CO2 koteika yuko riyo gijutsu ni kakawaru kokusai kyoryoku kanosei chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This survey focused on the end of the more promising companion and promoting the international cooperation on chemical CO2 fixation and utilization technology. As a result, the way of the carrying-forward of the international cooperation with more than one companion could be arranged beforehand. It led to getting an arrangement about a secrecy agreement respectively with Lurgi company and ABB company in Europe, and to providing a catalyst sample developed by RITE to implement an examination by the other party and to show related technical information. In addition, it concluded a cooperation agreement about a total system of the chemical CO2 fixation and utilization technology and methanol synthesis with ZSW. In Australia, negotiation about international cooperation with CSIRO which is a federal research organization and CRC (Cooperative Research Centre) for renewable energy has been started. The ideal circumstances are being ready for the chemical CO2 fixation project for which the international cooperation with the country where the natural energy is rich like Australia is essential when coming to practical use. To do alternating current with further high density in the following year it is desired to build a concrete study cooperation system. 1 fig., 4 tabs.

  14. Research report for fiscal 1998. Research concerning studies for development of thermochemical solar hybrid fuel production system; 1998 nendo chosa hokokusho. Netsukagakuteki solar hybrid nenryo seisan system no kaihatsu kenkyu ni kakawaru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A solar heat-aided system is investigated, in which CO2 is recycled, with methanol, dimethyl ether, etc., serving as carriers of the solar heat energy. In the evaluation of validity of the system as a whole, the system scale and economy and technologies necessary for the system were studied, which was to find out whether solar methanol production was commercially feasible in the sun belt. It was concluded that solar methanol was capable of competing against LNG (liquefied natural gas) in cost, that Japan was able to establish its own technologies for developing coal gasification solar reactors using overseas technologies for information, and that therefore such a system was technologically and economically valid. In the study of related technologies as is, surveys were conducted on coal gasification, natural gas reforming furnaces, methanol synthesis, dimethyl ether synthesis, light condensing technology, current state and cost of solar reactors, etc. Also investigated were the marketability of solar hybrid fuel, CO2 reduction efficiency, and the construction cost at the assumed site of construction (Australia). (NEDO)

  15. Leading research report for fiscal 1998. Research and study of 3-dimensional cell structure module engineering; 1998 nendo sendo chosa kenkyu hokokusho. Sanjigen saibo soshiki module kogaku chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For the formation of cellular tissues to replace bionic tissues, researches were conducted about technologies of forming bionic tissue modules by culturing various kinds of cells. As for the materials and methods for constructing cellular tissues, researches were conducted about the trends of research and development of 3-dimensional tissue culturing matrices and materials for micromanipulation. As for the development of technologies for the functionalization of 3-dimensionally structured cells, research and study were conducted about the technology of 3-dimensional cell structure organization through application of physical stimulation, the biochemical technology of differentiation inducing, and the differentiation inducing technology for hetero tissue culturing. As for the development of technologies for evaluation using 3-dimensionally structured cells, light CT (computer tomography), analysis and evaluation using spectroscopy and the like, feasibility of the biochemical analysis of the cell state using biosensors, technologies for measuring the secretion of carcinogenic and toxic substances, etc., were studied. In addition, the development of organic models to replace test animals, industrial evolution of 3-dimensional tissue module engineering, etc., were investigated. (NEDO)

  16. FY1998 survey on preparation of data collection related to new energy technology development (cogeneration); 1998 nendo shin energy gijutsu kaihatsu kankei data shu sakusei chosa (cogeneration) chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    New energy technologies have had the subsidy institutions established in association with advancement of the technologies, and such introduction promoting measures developed as the introduction assistance and advisory project. To promote this development more effectively, it is necessary that different data related to new energies are put into order comprehensively and systematically to be retained as the basic data. Therefore, this paper collects and puts into order the latest published data on cogeneration from among other new energy technology areas, with main regard to system listing, specific introduction examples, subsidy institutions, and how other countries are working on the technologies. Hydroelectric power generation uses up head energy of water by installing power plants along a river from higher location to lower location. Similarly the cogeneration is a kind of multi-stage energy utilization (cascade utilization) system that uses up energy serially from as high oil and natural gas combustion temperature as 1,500 degrees C or higher down to temperature levels used for hot water supply and air conditioning as low as 45 to 50 degrees C. It generates electric power by using a thermal engine, and utilizes waste heat effectively. (NEDO)

  17. Report of the results of the fiscal 1997 survey. R and D of high efficiency clean energy vehicles; 1997 nendo chosa hokokusho. Kokoritsu clean energy jidosha no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For the purpose of developing an automobile which keeps low pollution using petroleum substituting clean energy, decreases the running energy consumption to a half at least, and reduces the CO2 emission to less than a half of the conventional one at the same time, the R and D started in fiscal 1997. As to the study of a high efficiency hybrid power system, conducted were the prediction of fuel consumption performance of the system proposed, evaluation of element technology using hybrid simulator, evaluation experiment on a new hybrid vehicle, and grasp of overseas trends. In relation to the development of hybrid vehicles, the following were studied: methanol fuel cell loading hybrid vehicle, CNG engine loading hybrid vehicle, CNG ceramic engine loading hybrid truck, CNG lean burn engine loading hybrid truck, LNG engine loading hybrid bus, and DME engine loading hybrid bus. Besides, a survey on synthetic fuel and the related survey were carried out. 17 refs., 185 figs., 101 tabs.

  18. FY 1998 annual summary report on shared product life-cycle total information system. 3; 1998 nendo joho kyoyugata product lifecycle system ni kansuru chosa hokokusho. 3

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Recycling resources is gaining importance increasingly to correspond to global environmental problems. In urban areas, in particular, it is important to efficiently recover and recycle used large-size consumer products, e.g., home electric appliances and automobiles, which are discharged in large quantities. This study proposes a shared product life-cycle total information system, based on recognition that material recycling systems, encompassing stock materials, product production, consumption, and disposal and recycling of wastes, are essential. This system corresponds a material to information, in an attempt to realize more efficient recycling of products. The study for this fiscal year was focused on use of information modules attached to products and their members, product recycling systems using these modules, necessity for and problems involved in thermal recycle systems, problems involved in recycling home electric appliances and extraction of the data for their recycling, and material recycling process systems for home electric appliances and automobiles. (NEDO)

  19. Research report for fiscal 1998 on regional new energy vision drawn up for Tokushima Prefecture; 1998 nendo Tokushimaken shin energy vision sakutei chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The amount of energy in existence is theoretically the amount of energy that exists in a given region while the available amount is an amount of energy worked out with technological, economic, and social conditions taken into consideration. The total of the amount in existence and that of the available amount are mentioned in a table, and the available amount is further shown in terms of calorie. It totals 11,120Tcal per year, which is equivalent to approximately 55% of the whole amount of energy that Tokushima Prefecture demands. The availability of each type of new energy and the state of development of related technologies are studied to determine what priority is to be given to what energy. The group that is given the highest priority consists of photovoltaic power generation, passive solar systems, refuse fueled power generation, and heat from wastes (this group occupying more than 80% of the available amount in Tokushima Prefecture). The second group consists of wind power generation, clean energy vehicles, cogeneration, and small and medium scale hydroelectric power generation. The third group consists of fuel cells, ocean energy, biomass, and temperature difference energy. Natural conditions surrounding new energy in existence in Tokushima Prefecture are rather favorable, but social conditions are not. (NEDO)

  20. Report on the fiscal 1996 research cooperation promotion project, `the research cooperation diagnosis survey`; 1996 nendo kenkyu kyoryoku jigyo `kenkyu kyoryoku shindan chosa` hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    A diagnosis survey was conducted for Japan to cooperate in researching subjects on technical development in developing countries. In fiscal 1996, surveys were made on the following: (1) establishment of the industrial base (Vietnam), (2) preservation of biological diversification and the continuous utilization (Brazil), (3) fostering of the industry of automobile parts (Thailand), (4) finding out of items on environment related fields (India), (5) environmental response type system for effective use of water resource (the Philippines), (6) small size geothermal exploration in remote islands (Indonesia). (1) is research cooperation for welding technology, powder metallurgy technology, hypoid gear manufacturing technology, and iron making technology by the direct reduction method. In (2), research/development are conducted in cooperation with research institutes in Brazil on survey/identification/utilization of bioactive substances from biological resources in Brazil. In (4), an examination was made of the seeds for research cooperation in technical fields such as environment and energy. Having a strong relation with the industrial circle, SCIR is carrying out researches on aerospace, petrochemical, biology, electronics, medicines/drug, etc., which indicated fulfillment of intellectual infrastructure in India. 52 figs.

  1. Report on preceding researches in fiscal 1998 on the survey and research on conjugate materials; 1998 nendo conjugate material no chosa kenkyu sendo kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Research and development has been made on the 'conjugate materials (CM)' , the innovative materials in which ultra fine inorganic and organic structural units of molecular levels are introduced to be oriented regularly in glass matrix to respond to external force conjugately. The current fiscal year reported items having been made clear by further surveys and researches on CM as proposed by the fundamental surveys having been done as the second year. Section 1 summarizes significance of the research and development; Section 2 reports the result of the CM research and survey and the subjects related to application areas of CM; Section 3 reports the result of the CM market research performed newly in the current fiscal year; Section 4 reports the contents and result of the questionnaire survey to glass related small enterprises as to what interest these enterprises will have upon assuming that these CM products have been realized; Section 5 reports the result of surveys on patents and literatures related to photonics; and Section 6 states future problems in the CM research and development, and summarizes the future prospects of CM. (NEDO)

  2. Fiscal 1998 research report on development, study and evaluation of tribo-materials; 1998 nendo tribo material no kaihatsu chosa hyoka hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Recently, needs for tribo-materials are on the increase for further energy saving and improvement of various functions and durability in various field such as less-fuel consumption car, new type Shinkansen, linear motor car, high-speed motor boat, various machines and tools, electronics, medical equipment and vitally adaptable material. This project researches and studies various properties required for tribo- materials for surface treated materials by ceramic and other material films, and clarifies the guidance and direction of the technology for creating tribo-materials by surface treatment and surface modification, through clarifying a friction/abrasion mechanism by collection of basic characteristic data and analysis of abrasion powders. This project is studying the marginal condition of film destruction for ceramic system vapor-phase deposited films, through studying the effect of mechanical properties of substrates, film surface treatment methods and film surface shapes on the marginal condition. (NEDO)

  3. Fiscal 1995 verification survey of geothermal exploration technology. Report on a deep geothermal resource survey; 1995 nendo chinetsu tansa gijutsu nado kensho chosa. Shinbu chinetsu shigen hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-06-01

    For the purpose of reducing the risk of deep geothermal resource development, the paper investigated three factors for the formation of geothermal resource in the deep underground, that is, heat supply from heat source, supply of geothermal fluids, and the developmental status of fracture systems forming reservoir structures. The survey further clarified the status of existence of deep geothermal resource and the whole image of the geothermal system including shallow geothermal energy in order to research/study usability of deep geothermal resource. In the deep geothermal resource survey, drilling/examination were made of a deep geothermal exploration well (`WD-1,` target depth: approximately 3,000-4,000m) in the already developed area, with the aim of making rationalized promotion of the geothermal development. And the status of existence of deep geothermal resource and the whole image of the geothermal system were clarified to investigate/study usability of the geothermal system. In fiscal 1995, `WD-1` in the Kakkonda area reached a depth of 3,729m. By this, surveys were made to grasp the whole image of the shallow-deep geothermal system and to obtain basic data for researching usability of deep geothermal resource. 22 refs., 531 figs., 136 tabs.

  4. Survey report on the development/utilization of petroleum substitution energy in the Pacific region; Taiheiyo chiiki sekiyu daitai energy kaihatsu riyo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper collected/analyzed data on petroleum substitution energy in the Pacific region. In fiscal 1996, in addition to collection of the existing energy data, conducted were collection of energy data made retroactive from 1971, and time-series collection of the energy related expanded data including energy related production statistics/social statistics, energy consumption amount by industry, power generation facilities, oil production facilities, and environmental data. As to petroleum substitution energy, the paper took up new energy such as hydroelectric, nuclear, geothermal, photovoltaic, and wind power generation, and commercial-base renewable energy. As a result of the analysis, the supply of petroleum substitution energy in the whole Pacific region has been stable, 6.6% during 1980-1990, 7.4% in the first half of the 1990s, largely over the primary energy supply. The supply of nuclear power was overwhelmingly large, followed by hydroelectric energy and geothermal/new energy. 15 figs., 23 tabs.

  5. Research report of fiscal 1997. Study on profitability evaluation technique for waste power generation; 1997 nendo chosa hokokusho. Haikibutsu hatsuden ni kansuru keizaisei hyoka shuho no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For diffusion of waste power generation, cost reduction is important. As the profitability evaluation technique for conventional waste power systems, a simple recovery year method, total waste treatment cost method, generation cost method, and evaluation method by accumulated balance sheet are presented along with their principles. For the generation cost method, trial calculation results are presented based on documents reported. From methods for the study in Institute of Applied Energy, some estimation methods of construction cost are presented, and generation cost and profitability evaluation were studied by parametric accumulation method. The profitability was calculated for RDF power systems, and it was clarified that although as a whole this system is more efficient than a simple refuse incineration system, the balance sheet of local governments is dependent on a responsibility range for the facility. In a combined type (super refuse power generation), generally municipalities bear a combustor and boiler, while a prefecture bears generation facilities. Because of large scale generation, the profitability is dependent on a selling price of electricity. 37 refs., 36 figs., 24 tabs.

  6. Survey report on a regional new energy vision establishment project in Shirane Town; Shiranemachi chiiki shin energy vision sakutei nado jigyo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Surveys and discussions were given on regional new energy vision establishment in Shirane Town, Yamanashi Prefecture. Shirane Township has taken up environment as one of the important policies in the 'Shirane Heartful Plan', and discussed different projects to introduce new energies along the said vision. The basic policy in the discussions positioned in the new energies to be introduced the solar energy having large available amount as the center, cogeneration for emergency, clean energy fueled automobiles as a means to reduce environmental load, and wind power generation as part of the environmental education courses. The planned introduction projects will include the following applications: traffic road signs powered by solar energy, clean energy fueled automobiles, a solar energy powered hot water supply system at lunch supply centers, solar energy power generation facilities for culture halls and schools, street lights powered by a solar energy and wind power hybrid generation system, solar energy power generation and cogeneration for wide-area disaster prevention facilities, and a solar heat utilization system for flower and fruit farms. (NEDO)

  7. FY 1998 annual report on power generation by waste heat from cement production in China; Chugoku ni okeru cement hainetsu hatsuden 1998 nendo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This project is to implement a feasibility study for applying waste heat power generation, which have been already commercialized in Japan and producing remarkable results, to China's cement plants producing 3,500 t/d or more of clinker, and thereby to try to establish a link with the Japan's clean development mechanism. It is expected that introduction of these systems improves energy use efficiency and environments in China. The study results indicate that the project for a Tongling Conch plant could generate power of 15,000 kW, reducing CO2 emissions by 89,178 t/y and cumulatively 1,783,560 tons in the 20-year period. The results also indicate that the project will be highly profitable, with an estimated internal return rate of as high as 33.78%. The project for a Huaxin plant could generate power of 8,400 kW, reducing CO2 emissions by 48,412 t/y and cumulatively 968,240 tons in the 20-year period, annually saving power charges by 325 million yen and bringing an internal return rate of 10.72%. (NEDO)

  8. Report on current status of petroleum substituting energy development in the EU in FY 1997; 1997 nendo chosa hokokusho (sekiyu daitai energy kaihatsu no genjo (EU))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The EU is one of the most advanced places of petroleum substituting energy development. The EU is highly aware of environmental issues. For the COP3 held at Kyoto in December 1997, The EU gave more severe regulation of CO2 emission than the other advanced countries. The EU takes efforts in the development and introduction of energy effective for global environmental protection. In addition, research and development of geothermal, biomass and wave force energy are actively promoted in this place. Energy situations in this place are significant for predicting and analyzing the future trends of energy development and consumption in the other countries. Firstly, this report looks back toward energy demand held in check to a head at the beginning of the 1990`s. Secondly, supply of energy and cover of energy trend are described for recent years from the point of view. Thirdly, competitiveness of energy in EU countries are discussed from a position of energy density. Fourthly, circumstances about environmental issues are considered. Fifthly, the world market of energy is also considered. Finally, development of new energy and a trend of introduction with a sample of Sweden are introduced. 13 refs., 15 figs., 28 tabs.

  9. Report on a feasibility study of making an international joint research on energy in the Asia region; Asia chiiki kokusai kyodo kenkyu kanosei chosa hokokusho. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    A survey was conducted on the energy situation in Thailand, Indonesia, Malaysia, the Philippines and India, and a possibility of making an international joint research. Thailand has sharply increased investments from Europe and the U.S. since 1985, and has been making a rapid industrialization. As to the energy policy, it is important to secure the stable supply and stabilize the price. Indonesia has been rapidly increasing energy consumption in accordance with the recent economic growth, and is fear of becoming a net oil importing country in the near future. They are taking a policy for securing as much domestic oil and gas as possible. Malaysia has been keeping a high growth of over 8% per year for the past 8 years and rapidly increased energy demand. It is expected that they will maintain a high level of the development of energy resources. In the Philippines, the industrial energy is mostly coal, but electricity expected in future is from the oil-fueled power generation. The stable import of oil is a problem. 45 figs., 51 tabs.

  10. Fiscal 1997 report on the results of the international standardization R and D. Overall survey; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Sogo chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper summed up the results of the survey of tackling with the international standardization by enterprises and organizations involved in the standardization in the U.S., Europe and Japan, the results of the R and D on 20 themes for the international standardization, and the development toward the international standardization. As the R and D themes, the following were selected: the development of chemical method to analyze/evaluate metallic coatings of surface treated steel coating sheets, R and D of the basic evaluation method of functional composite particles, international standards for computer/manikins, basic technology of color image management, study on optimizing design/evaluation technology using quality engineering, study of the international standardization by economic evaluation of environmental impacts, R and D of the standardization of a method to test acceleration life of phosphorous acid fuel cells, development of a test method of halogen-free flame-retardant cables and a study of the cable standards, standard measuring methods of hormone effects of chemical substances, quantification of the sensory evaluation and international standardization in the paint field, experimental study on the international standardization for immunochemical measurement of chemical substances, etc. 24 figs., 16 tabs.

  11. Fiscal 1997 survey report on international cooperation for the energy use rationalization method; 1997 nendo jigyo hokokusho (energy shiyo gorika shuho kokusai kyoryoku chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    To carry out LCA in ISO-14040, inventory analysis (IA) is the basic. For studying arrangement of public data to carry out IA, collection work was done of background data which are indirectly concerned with copying machine. First, methods to make inventory data (ID) which are thinkable in the present situation were prepared, and items of emitted matters to be collected were set up in relation to the impact assessment method. Secondly, scenarios of each stage of life cycle of copying machine were set up, and virtual data on the material/energy consumption amount were arranged. Based on this, a method was further studied for making ID of the parts used in electric power, iron/steel, plastics, and copying machine. Third, based on the above-mentioned study results, ID was actually made, and a possibility was studied of making inventory in life cycle of copying machine. Moreover, the state of the automobile LCA carried out at Stuttgart University was examined. At last, the paper summed up subjects of and future study methods for the inventory making method. 2 refs., 25 figs., 77 tabs.

  12. Fiscal 1998 research report. Application technology of next-generation high-density energy beams; 1998 nendo chosa hokokusho. Jisedai komitsudo energy beam riyo gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Survey was made on application technologies of next- generation high-density energy beams. For real application of laser power, application to not exciting source of YAG crystal but machining directly is highly efficient. For generation of semiconductor laser high-power coherent beam, phase synchronization and summing are large technological walls. Short pulse, high intensity and high repeatability are also important. Since ultra-short pulse laser ends before heat transfer to the periphery, it is suitable for precise machining, in particular, ultra-fine machining. To use beam sources as tool for production process, development of transmission, focusing and control technologies, and optical fiber and device is indispensable. Applicable fields are as follows: machining (more than pico seconds), surface modification (modification and functionalization of tribo- materials and biocompatible materials), complex machining, fabrication of quantum functional structured materials (thin film, ultra-fine particle), agriculture, ultra-precise measurement, non-destructive measurement, and coherent chemistry in chemical and environment fields. (NEDO)

  13. Research report for fiscal 1998. Research into the trends of low-carbon automotive fuel manufacturing technologies; 1998 nendo jidoshayo teitanso nenryo no seizo gijutsu doko chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Studies are made of optimum materials and methods for manufacturing low-carbon fuels for reduction in greenhouse gas emissions. When their thermal dynamic limits and the technological maturity are considered, it is inferred that no extensive improvement will be achieved by merely improving on the efficiency of the existing fuels. The use of various high-efficiency driving power sources utterly different in mechanism from the conventional ones, such as those for fuel cell-powered automobiles, and the promotion of the use of low-carbon fuels such as methanol and methane for all kinds of driving power sources including those for the said fuel cell-powered automobiles, will become necessary. The use will also be necessary of recyclable materials. The biomass resources, in particular, since they absorb CO2 gas in their growing process by virtue of photosynthesis, may be said to be free of CO2 gas emissions. They have their own problems, however, which involve the economy of energy consumed for their production, harvesting, transportation, and conversion into fuels. It is therefore required that their whole life cycle be studied before their greenhouse gas reduction effect may be correctly assessed. The quantities of resources available for the production of automotive low-carbon fuels, manufacturing technologies, etc., are first of all put in order for easy perusal. An effective way is assessed for the whole including the life cycle. (NEDO)

  14. Survey report on an environmental harmony type production system of chemical products; Kankyo chowagata kagaku seihin seizo system ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    As part of establishing an environmental harmony type production system of chemical products, study and survey were made on PET bottles. Using the life cycle analysis method (LCA), a study was made for proposing a material recycle (MR) method which is environmentally and economically excellent in the stage of recycling waste PET bottles. The total cost of recycling can be reduced by 34% supported by a decrease in equipment cost and improvement in yield if there is no mixture of foreign substances such as aluminum caps and PVC bottles. However, the ratio of the amount obtained from the reduction to the total production cost is small, and it is necessary to take measures from a viewpoint of the cost in a total production process and environmental loads. In a survey in Kawaguchi city, PET bottles discharged from the business sector occupied 41% of all the discharge amount. In a survey in Yokohama city, very important data were obtained on PET bottles appointed as the second type under the recycle law. The quality of PET bottles to be brought to the recycling plant is important for effectively processing PET bottles in MR method. For achievement of MR which is low in cost and small in environmental load, needed were cooperation by citizens, the shipping management system in autonomous government, and changes in design and material quality to be made by the industrial circle. 8 refs., 64 figs., 68 tabs.

  15. Fiscal 1994 survey report. Survey of energy supply/demand structure sophistication and global environmental impact; 1994 nendo energy jukyu kozo kodoka chikyu kankyo eikyo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    Outlines of various energy supply/demand analytical models are surveyed. With environmental problems gathering importance, a number of models are being introduced in which energy supply/demand structures, long-term climate changes, and impacts of policy options on social economy are linked to each other. Some socioeconomic impact models cover a single country and others the whole world. They are various in type, ranging from dynamic optimization models to static balance models. Twenty-four models are chosen, and grouped into two types respectively covering Japan and the whole world from a geographical viewpoint and into three groups in view of their structures. Under an optimization model, such optimization is accomplished as economic growth maximization and energy cost minimization and so forth under given energy supply restrictions. Under a general balance type econometric model, an adjustment process in which capital and labor and production are coordinated across multiple departments is expressly stated. Under a partial balance type econometric model, a demand function for goods is given and optimum behavior such as consumption maximization is indirectly described. (NEDO)

  16. Report on the survey for working out the new energy vision of the Neba village area; 2001 nendo Neba mura chiiki shin energy vision sakutei chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-03-01

    For the purpose of promoting the introduction of new energy and enhancing the awareness of it in Neba Village, Nagano Prefecture, an investigational study was conducted of characteristics of the natural environment/characteristics of social economy of the village, existence amount of new energy, project for new energy introduction, etc., and a vision was worked out. Neba Village is surrounded by 1,000m class height mountains and wedge valleys with a lot of undulations and has a key road running through the village. The population was 1,532 as of April 1996, which continues decreasing. The problem on the decrease in number of child is conspicuous. As the project for new energy introduction, the following were studied: introduction of photovoltaic power generation facilities to city/farm village interchange facilities (Nebaland), introduction of photovoltaic power generation facilities to kindergarten/elementary school/junior high school for educational purposes, introduction of small wind power generation facilities to pottery facilities and lodging facilities, introduction of mini-hydroelectric power generation along the Neba River and electric power supply to wood processing facilities, methane gas fermentation cogeneration using stockbreeding waste and garbage, ligneous biomass cogeneration using waste wood, etc. (NEDO)

  17. Report on the survey for working out the new energy vision of the Urugi village area; 2001 nendo Urugi mura chiiki shin energy vision sakutei chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-03-01

    For the purpose of promoting the introduction of new energy and enhancing the awareness of it at Urugi Village, Nagano Prefecture, an investigational study was conducted of characteristics of the natural environment/characteristics of social economy of the village, existence amount of new energy, project for new energy introduction, etc., and a vision was worked out. Urugi Village is 800 meters above sea level and in the riches of the Nature being surrounded by mountains on all sides. The population of the village was 734 as of March 1993, which is decreasing by 14-15/y. The aging rate was very high, 32.3%. As the project for new energy introduction, the following were studied: 10kW class photovoltaic power generation facilities to be installed at Furusato-kan and by the road of Hiraya Pass, 2.5kW class wind power generation facilities to be installed at Hiraya Pass for education of new energy, installation of a 10kW class mini hydroelectric power plant supplying power to the auto-camping site, stockbreeding biomass cogeneration which conducts fermentation of the methane from animal feces and garbage generated in Urugi Village, ligneous biomass cogeneration, etc. (NEDO)

  18. Report on the fiscal 1995 research cooperation promotion project, `the research cooperation diagnosis survey`; 1995 nendo kenkyu kyoryoku suishin jigyo `kenkyu kyoryoku shindan chosa` hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    A diagnosis survey was conducted for Japan to cooperate in researching subjects on technical development in developing countries. In fiscal 1995, surveys were made on the following: (1) recycling technology of biomass industrial waste in the tropical region, (2) small size geothermal exploration in remote islands, (3) waste water recycling system using activated carbon, etc., (4) upgrading of proofreading technology of measuring standards, (5) technology to simply set up conditions for forming engineering plastics, (6) assessment of safety of chemical substances. In (1), energy and useful matters are recovered from oil palm of Indonesia by thermal decomposition technology. In (2), a system is constructed which can effectively explore geothermal energy in remote islands in the east Indonesia. As to (3), a survey is conducted in the Philippines. (4) contributes to upgrading of length measuring standards in Thailand. (5) attempts to improve technology of forming engineering plastics. In (6), research cooperation is made for preventing environmental pollution and health damage by chemical substances from happening in Thailand and for technology for assessing safety of chemical substances which contributes to the proper use of the hazardous material law in Thailand. 28 figs.

  19. Report on current status of petroleum substituting energy development in the USA in FY 1997; 1997 nendo chosa hokokusho (sekiyu daitai energy kaihatsu no genjo (Beikoku))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In the last twenty-five years, the level of social recognition for the importance of energy conservation grew progressively from a total nonexistence of concern to the driving force that ensures the future environmental health of the nation and the world. Executive Order 12003, relating to energy policy and conservation, was signed by President Jimmy Carter and dated July 20, 1977. In 1992, President Clinton issued Executive Order 12759 - federal Energy Management. Each agency will prescribe policies under which its industrial facilities in the aggregate increase energy efficiency by at least 20% in fiscal 2000 in comparison to fiscal 1985. Current Federal programs for building efficiency are estimated to result in 31.5 billion dollars in annual energy saving for consumers by 2010. Future trends attract attention. The major programs currently in force to implement these policies and directives include Rebuild America, Million Solar Roofs Initiative, Home Energy Rating Systems, and Weatherization Assistance Program. 37 refs., 1 fig., 6 tabs.

  20. FY 1996 annual report of investigation on biological fixation of carbon dioxide. 2; 1996 nendo seibutsuteki CO2 kotei ni kansuru chosa hokokusho. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Various kinds of biological fixation processes of CO2 were evaluated from the various viewpoints. Afforestation of tropical and temperate areas, greening of desert, biomass energy production in these areas by energy plantation, coastal mangrove plantation, fertilization with nitrogen and phosphate to outer ocean and coastal, upwelling zone fertilization with iron, and coral reef expansion combined with OTEC (ocean thermal energy conversion) were comparatively investigated as the selected measures. As a result, the cost of CO2 fixation by cultivation of sea weed and plankton was much higher than that of afforestation. The iron fertilization method which was considered to be one of the high CO2 reduction potentials might be economical. However, its effect could not be quantitatively evaluated. The afforestation of tropical and temperate areas seemed to be most feasible in a short term from the viewpoints of economy and environment. It was suggested that the establishment of a systematic water management technology could make greening and afforestation of desert. 76 refs., 27 figs., 28 tabs.

  1. Fiscal 1998 research report on new recycling technology for waste lube oil; 1998 nendo haijunkatsuyu no recycle no shingijutsu ni kansuru chosa kenkyu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For effective use of resources and environment conservation, R and D was made on recycling technology for recovered waste lube oil. On the R and D on removal of ash and chlorine contents in waste lube oil, iron oxide-carbon composite was found as adsorbent which can reduce ash content and chlorine content to 0.02wt% and 5ppm, respectively. On the research on the applicability of waste lube oil as melting furnace fuel for bottom ash and fly ash, as the melting experiment result at a real plant, the recycled heavy oil obtained by simple treatment of waste lube oil showed dioxin decomposition rates more than 99.9% and dioxin concentrations less than 0.6ngTEQ/Nm{sup 3} in waste gas, achieving the targets regulated by Air Pollution Control Law. The applicability of waste lube oil as fuel was thus confirmed. On the research on the applicability of waste lube oil as fuel for power generation in oil refineries, both waste lube oil alone and mixed oil with residual oil were available as gasification fuel through design considering ash content removal, and reasonable selection of equipment and piping materials considering chlorine. (NEDO)

  2. Report on the survey in fiscal 1998. Survey on an environment technology transfer information network; 1998 nendo hokokusho. Kankyo gijutsu iten joho network chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This paper describes a survey on an environment technology transfer information network. Based on the achievements obtained by the surveys in fiscal 1995 and 1996, the ICETT has participated as one organization constituting the APEC environment technology exchange virtual center, and begun providing information since April 1997. As the environment technology information, those items actually employed by factories and operation sites in Japan are put into a data base, and into a home page including training information centering around those contained in the data base, and examples of works done by local governments for prevention of pollution. Furthermore in fiscal 1997, a simulation software for a model process has been developed. Fiscal 1998 strengthened the data base for environment preservation technology information, investigated environment preserving model companies and summarized them including even their management aspect. Investigations were carried out in developing countries on application of cleaner technologies. Gaps far exceeding anticipation exist in every field between these developing countries and Japan. Environment protection measures applied and succeeded in the developing countries as the means to narrow the gaps were collected, and compiled as the specific examples. (NEDO)

  3. Report on results of the survey for drawing new energy visions for the Town of Shiranuka district; Shiranukamachi chiiki shin energy vision sakutei chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The new energy visions are drawn for Town of Shiranuka. Utilization of solar energy is at the top of the prospective new energy reserves for the town, followed by utilization of heat of wastes, biomass energy (in the stock raising industry), and photovoltaic power generation. The expected recoverable new energies account for approximately 35% of the total annual energy consumption of the town. The basic guidelines for introduction of new energies are drawing the priority projects which place importance on environmental education and bringing up talented persons, development of the soft policies for supporting the citizens and related entrepreneurs, and introduction of new energies for promoting new industries. The priority projects include hard ones, e.g., foundation of Eco-school Shiranuka, Eco-park Kushiro/Shiranuka (biomass energy supply center) and Koima new energy park, and soft ones, e.g., establishment of the new energy grand prize awarded by PR brochure ''Shiranuka'', foundation of the Shiranuka fund for introduction of new energies, construction of a Shiranuka Citizens' power station, and rent-a-car project for eco-car test runs. (NEDO)

  4. Research report of fiscal 1997. Research on the projects on Activities Implemented Jointly Japan Program (feasibility research on energy saving by improving heat management for hot blast stoves and heating furnaces); 1997 nendo chosa hokokusho. `Kyodo jisshi katsudo Japan Program` ni kakawaru project chosa (neppuro, kanetsuro no netsukanri kaizen ni yoru sho energy kanosei chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Research was made on joint implementation (JI) for preventing global climate changes in China. Since such the stove and furnace consume a large amount of energy, their improvement and energy saving are important for integrated iron plants. Maanshan iron plant was selected for the research. All the furnaces were manually operated without combustion control systems, and oxygen meters for exhaust gas frequently troubled. As measures for the stoves, operation at a proper air fuel ratio, improvement of over heat storage combustion, and dust cleaning for waste heat recovery gas heaters were proposed. For the furnaces, a proper oxygen content at the end of furnaces (reduction of invasion air) was proposed to improve exhaust gas loss up to that in Japan. For this target, reinforced instrument management and standardized combustion control are essential. JI of software improvement for operation and management can reduce annual greenhouse effect gas emission to 45,900t and 6,300t in carbon equivalent for the stove and furnace, respectively. CO2 reduction is also estimated to be 1,173,000t and 205,000t in China of 107,570,000t in raw steel production, respectively. 28 figs., 32 tabs.

  5. Fiscal 1997 feasibility survey of an environment friendly type coal utilization system. Feasibility survey of the environment friendly type coal utilization system in Malaysia and Vietnam (case of Vietnam); 1997 nendo chosa hokokusho. Kankyo chowagata sekitan riyo system kanosei chosa (Malaysia oyobi Vietnam ni okeru kankyo chowagata sekitan riyo system kanosei chosa (Vietnam ban))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper grasped the state of coal utilization by coal consumption field, the state of coal physical flow in Vietnam, etc., surveyed/studied a possibility of introducing the environment friendly type coal utilization system, and assessed the possibility. As to energy resources, the north is abundant in hydroelectric and coal (mainly anthracite) resources, and the south in oil and natural gas resources. Coal production in fiscal 1997 is planned to be 10 million tons. Coal preparation technique presently available is only grain size sieving. Accordingly, it is necessary to study for heightening efficiency of facilities and modernizing facilities in accordance with the introduction of the environment friendly type coal utilization technology. During the study, it is possible to propose improvement on coal processing technology (coal preparation technology). Assessment and study are made especially of the coal selection system, fine coal recovery system and waste water treatment system. For the plan on new coal-fired power plants (300MWtimes4), there is left much necessity of proposing studying models considered of the anthracite combustion technology and environmental improvement and of assessing/studying them. 60 figs., 117 tabs.

  6. FY 1995 report of feasibility study of a model project on energy saving equipment for Fe-alloy electric furnaces in China. Independent theme survey of rationalization of energy consumption; 1995 nendo chosa hokokusho Chugoku no gokintetsu denkiro ni okeru sho energy ka setsubi model jigyo jisshi kanosei chosa. Energy shiyo gorika taisaku kobetsu tema chosa jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-01

    A feasibility study of a model project was conducted on energy conservation and introduction of technology against pollution for Fe-alloy electric furnaces in China. The total production of Fe-alloy was 4.32 million tons in 1995, which recorded the maximum production. Out of which ferro-Cr occupied 9.5%. Production of high carbon ferro-Cr in 2000 is estimated to be 600,000 tons. China`s electric furnaces for ferro-Cr using carbon as heat source do not have covers and gas recovery systems. The gas from furnaces is burnt and wasted, which results in air pollution. To cover the furnaces, grading of powder materials is indispensable for improving the ventilation in furnaces. In Japan, sintering and pelletizing methods were developed. In China, the covering and gas recovery are performed for furnaces using expensive massive ores. In most cases, they are not performed. For three works at Jilin, Lioyang and Jinzhou surveyed in this project, recovered gas can be effectively utilized, which would provide energy saving and environment improving effects. They have enough site areas and workshops in the sites. Construction works can be conducted by China themselves. 6 figs., 32 tabs.

  7. Survey report of FY 1997 on the long-term energy technology strategy. Survey on the pre-assessment system of energy and environmental technology research and development; 1997 nendo chosa hokokusho (choki energy gijutsu senryaku chosa). Energy kankyo gijutsu kenkyu kaihatsu no jizen hyoka ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    To select projects of the New Sunshine Program which is the locomotive for Japan`s research and development of energy and environmental technologies and to map out the Program`s long-term strategy, it is required to develop an effective methodology of assessing research and development themes. It is also necessary to establish the pre-assessment system which makes the assessment process more logical and which will enable the priority setting among different themes on the basis of objective and quantitative analysis. Additionally, transparency should be ensured for such a pre-assessment process through disclosure to the public and other means. The present survey aims to concretize the pre-assessment system by studying the system and techniques of an assessment system which is applicable to the research and development themes of the New Sunshine Program and is objective, quantitative and logical and which can ensure transparency and by receiving suggestions on the pre-assessment of Japan`s research and development of energies and environmental technologies through research on overseas trends of government-led research and development. 3 refs., 7 figs., 26 tabs.

  8. Fiscal 1997 survey report. Feasibility study of the environmentally friendly type coal utilization system (feasibility study of the environmentally friendly type coal utilization system in India); 1997 nendo chosa hokokusho. Kankyo chowagata sekitan riyo system kanosei chosa (Indo ni okeru kankyo chowagata sekitan riyo system kanosei chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The survey was conducted of the present situation of coal utilization and the present coal situation such as the environmental state of India which is a coal producing/consuming country next to China in Asia. The paper studied a feasibility of the introduction of the environmental friendly type coal utilization system` to be planned in India. The items for survey are the present situation of economy and energy and the future trend, environmental problems on coal utilization, the present status of the coal distribution system and study subjects, the present status of coal utilization by field and study subjects, a possibility of briquette use, a possibility of coal fluidization, electric power development plans and coal combustion technology in each industry, etc. The subjects are the obligation of coal preparation to coal thermal power plants 1000 km away from coal mines starting 2001, measures taken for effective ash use, measures taken for superannuated gas furnaces, etc. Based on the results of these site surveys and reports of the investigation under consignment from CMPDI, the paper studied/analyzed possibilities of introducing the coal utilization system having actual introduction results in Japan to India, and made an investigational report. 39 refs., 12 figs., 56 tabs.

  9. Research report of FY 1997 on the environmentally acceptable coal utilization system feasibility survey. Environmentally acceptable coal utilization system feasibility survey in Malaysia and Vietnam (Malaysia); 1997 nendo chosa hokokusho. Kankyo chowagata sekitan riyo system kanosei chosa (Malaysia oyobi Vietnam ni okeru kankyo chowagata sekitan riyo system kanosei chosa (Malaysia ban))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In this survey, the coal utilization status in individual consumption sectors and coal distribution status in Malaysia are summarized as basic data for the introduction of environmentally acceptable coal utilization systems. In this fiscal year, the status of existing coal utilization technology and environmental issues in Malaysia are summarized as basic data for the introduction of above-mentioned systems on the basis of data and information collected by basic research and site survey in FY 1996. Malaysia is one of the rich countries producing the primary resources with crude petroleum, natural gas, hydro-power, and coal. The coal demand will be realized after saturating LNG development since 2000. The major coal consumption industries are power generation sector and cement industry sector. As expected increase in the future coal consumption, efficiency of coal utilization and environmental issues are problems in the future. Based on the FS results of this survey, the survey will be continued for planning and conducting the model project required from Malaysia. 8 figs., 34 tabs.

  10. Fiscal 2000 achievement report on the research and development of medical and welfare apparatus/technology High-speed and 3-dimensional X-ray CT system using cone beam X-ray (Energy use rationalization); 2000 nendo iryo fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho. Kosoku cone beam sanjigen X sen CT (energy shiyo gorika)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-05-01

    In the study of a 3-dimensional data reconstruction system, the fabrication of an interface to serve between the data transmission section and the image reconstruction unit was complete, and evaluation was started of its performance and capability. In the effort to develop a 3-dimensional image processing system, specifications were deliberated for image reading systems and DICOM (digital imaging and communications in medicine) converters for clinical research, and articles to be ordered were selected. For dealing with a multi-platform system and enabling image-aided dignoses by plural users, a browser plug-in type web-based GUI (graphical user interface) was employed as the user interface and in the image server. The system construction was complete, and performance evaluation was started. In developing the total system, designing and manufacturing were started of the data transmission section, the bed and its rotary mount, and the high-voltage generation unit for the X-ray tube and X-rays. Preparation was started of a system control software program. (NEDO)

  11. Achievement report for fiscal 1999 on research and development of technologies for medical welfare equipment. Chromosome image analysis and diagnosis device with confocal scanning laser microscope; 1999 nendo iryo fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho. Kyoshoten laser kenbikyo ni yoru zensenshokutai gazo kaiseki shindan sochi

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-05-01

    The device is now satisfactorily capable of all image processing functions (bi-levelling, color deviation, brilliance adjustment, etc.) with the exception the karyotyping function. A substance that emits fluorescence by laser excitation is developed (for labelling the probe). A direct labelling method is studied, in which nucleic acid probes (nucleic acid labelled for chromosomal identification) will prove to be remarkably high in sensitivity. A new fluorescent reagent is synthesized, which is a BHHCT-4-dUTP to act as a nucleic acid probe. It is found that the new substance is superior to the conventional fluorescent substances in terms of stability and that all chromosomes may be forced into hybridization (selective combination of a probe with a peculiar chromosome) when various probes are labelled by this substance. A programing unit is constructed for a chromosomal aberration database. Items needed relative to chromosomes and parameters relative to chromosomal aberration data are appropriately arranged, and conditions to satisfy for their development into a database are studied. A rough design of an interface is complete. (NEDO)

  12. FY 2000 Report on the survey results. Survey on international cooperation for development of a system for supporting low-invasion surgical operations; 2000 nendo teishinshu shujutsu shien system kaihatsu ni kakawaru kokusai kyoryoku ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The international Medical Treatment Symposium and Exhibition were held from July 20 to the end of August, 2000 in Hannover in Germany, in which the Japan's system for supporting low-invasion surgical operations was presented and information was exchanged for the system. A total of 50 to 100 neurosurgeons visited the exhibition, held as part of the symposium, every day from July 21 to 24. The system for supporting low-invasion surgical operations is rated as the most advanced one in the world. It attracted much attention, because a number of attendees applied for operating manipulator. The research trends seen in the symposium point to early diagnosis of diseases, finer surgical operations, low-invasion type operations, use of high-function diagnosis devices for improving operations, real-time imaging, and application of DNA diagnosis to pathological diagnosis, among others. Japan is leading the world in the technological areas of micromachines, robotics, high-vision and diagnosis. The bold researches, e.g., those on artificial visual and hearing systems to be embedded in the head, are pursued more extensively in the overseas countries. (NEDO)

  13. 1998 investigation report. Basic investigation for promotion of joint projects, 'Investigation on Russian CO2 reduction conditions'; 1998 nendo Roshiakoku CO{sub 2} sakugen anken chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A feasibility study was conducted for a project assuming modernization of a manufacturing plant and improvement of power generation facilities in Russia, with the aim of 'joint implementation' in reducing the greenhouse effect gas by utilizing technologies mutually between advanced nations. The project is to replace obsolete an open hearth furnace and cupola with electric furnaces in connection with the cast steel and forged steel production facilities of Uralmash, a largest-scale Russian heavy machinery manufacturer, to change surface hardening equipment for rolling roll products from a combustion method to a low frequency induction heating method, and to enhance efficiency of the power generation equipment of a public corporation which supplies electric power to Uralmash. Through a field study and a technological investigation, the social background of the project was examined such as the situation of the Russian Federation, its environment and the present state of Sveldorv province; then, examined were the specifications of the facilities, project cost, cost performance, CO2 reduction expected, environmental influence, etc., in the case where the modernization project of Uralmash was implemented. (NEDO)

  14. Fiscal 1998 research report on the basic study on the effect of microgravity on living individuals; Bisho juryoku no seibutsu kotai ni taisuru eikyo no kiso kenkyu 1998 nendo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    In order to clarify the effect of microgravity on vital functions and organisms at a cell level, this research studies the molecular biological response function of higher animals, the gravity acceptable mechanism of single-cell organisms, the effect of gravity on geotaxis of insects, measurement of monoamine system neurotransmitters of rat hippocampus by dialysis in a brain and the effect of microgravity on it, the effect of microgravity on water and bone metabolism functions and immunity function, and the analysis of BZ reaction as a simple model of vital reaction. The themes of the research are as follows: the effect of microgravity environment on cell fusion, the analysis of gravity acceptable mechanisms of single-cell organisms, the effect of oriental medical treatment on bone metabolism anomaly of mouses under microgravity environment, the effect of oriental medical treatment on change in physiological function under microgravity environment, the effect of microgravity environment on immunity systems, the effect of gravity on cell activities, the effect of a gravity field on chemical oscillation reaction, and the effect of gravity on geotaxis of insects. (NEDO)

  15. Fiscal 1998 research report on the production of bio-affinity materials by using microgravity environment; Bisho juryoku kankyo riyo seitai shinwa zairyo no sosei kenkyu 1998 nendo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Experiment was made on production of bio-affinity materials under a microgravity condition by using the drop experiment facility of the underground a gravity experiment center. The experiment includes fast polymerization of polymer grains, protein orientation control and protein thin film formation, organic thin film formation, O/W emulsion preparation, and crystallization of protein under a microgravity condition. In polymerization of fine pyrrole grains under the existence of fine latex grains, production of fiber polypyrrole is remarkable, and fiber growth from latex surfaces was confirmed. The obtained thin bacteriorhodopsin film shows a photoelectric response, and as the AFM observation result, it is mainly composed of violet single-layer electrodeposited films. The wetting rise of acrylic monomer at the interface between solid and liquid is largely dependent on viscosity. The oil droplet size distribution of O/W emulsion is narrower than that in ground experiment, and is close to a normal distribution. Easy imaging of products was achieved by tracing cytochrome crystals with change in turbidity. The crystallization phase diagram of black mold acid protease A, and basic data in crystallization process were obtained. (NEDO)

  16. Fiscal 1998 overseas geological structure survey. Japan-China joint coal survey Mei-Xian project; 1998 nendo kaigai chishitsu kozo nado chosa hokokusho. Nippon Chugoku sekitan kyodo tansa Mei-Xian project

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Japan-China joint coal survey was made through seismic prospecting by Japanese group and drilling prospecting by Chinese group. Mei-Xian mine property includes coal seams of the Jurassic period, and is covered with the quaternary period stratum without any coal seam. The base of the quaternary period stratum exists at depth of 50-400m, while the coal seams at depth of 300-700m. Among 11 existing seams, the 1st and 5th seams are main objects for prospecting. The 5th seam of 0.2-8.96m (2.95m in average) thick is the most expected important one, distributing all over the mine property. The 5th seam also has branch seams spreading over 2.5km from east to west and 1.2km from south to north in the center part of the mine property. The 1st seam of 0-8.62m (2.90m in average) thick is most thick in the south part of the mine property. The theoretical amount of coal deposits in the whole coal seam is estimated to be nearly 290,000,000t by Chinese group (nearly 50% of it in the 5th seam). That is also estimated to be nearly 346,000,000t by Japanese group (155,000,000t in the 5th seam). Both 1st and 5th seams are composed of sub-bituminous coal. (NEDO)

  17. FY1990 research report on the support for promotion of distributed new power source technology introduction and measures for their popularization and lightenment; 1990 nendo bunsangata shinhatsuden gijutsu donyu sokushin shien to fukyu keimo no arikata ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-03-01

    To avoid economic and technological risks upon initial introduction of distributed new power source technology, methods for reduction in the initial investment burden under the lease system and methods for risk reduction under the insurance system are discussed, and each is evaluated for their applicability to the new technology. Methods for popularizing and enlightening the technology are also discussed using the result of a 'survey for promoting the introduction of new energies' conducted into local autonomies assuming the role of diffusing the new technology into the residential and commercial sectors. Through the review of the current status of initial investment burden reduction methods mainly under the lease system and through some case studies, the applicability of such methods to the new technology is discussed. Similar studies are also made by investigating the current status of risk reduction methods and by conducting case studies, these centering on various kinds of machinery insurance. Questionnaires are sent to local autonomies, who play an important part in the initial introduction into and popularization in the residential and commercial sectors, to learn their consciousness of energy problems and of distributed new power source technology introduction. The result is used to review how popularization and enlightenment activities should be conducted. (NEDO)

  18. Report on the FY 1999 research survey on the industrial utilization/development of the biofilm formation mechanism and antifouling substances; 1999 nendo bio film keisei kiko oyobi sogai busshitsu no sangyoteki riyo kaihatsu chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The paper described the results of the FY 1999 research on the fouling by marine aufwuchs. The survey is aimed at searching the nature world for active substances for biological antifouling. The fouling mechanism in the ocean is as follows. The adsorption of organisms called the conditioning film first occurs on the surface, and next, bacteria and diatom around the surface form biofilm and cover. After that, biological fouling by large aufwuchs occurs. Therefore, the control of biofilm formation was regarded as most important, and with this as a guidepost, the search was conducted. Using biofilm anti-formation activity and periphytic bacteria anti-growth activity as guideposts, some compounds were searched for. Being aimed at Porifera, in particular, new compounds were isolated from it. Since few of other organisms attaches on the surface of sponge, there is a great possibility of Porifera's producing any anti-fouling substances. Further, it is thought that symbiotic microorganisms of sponge (40% of the total weight) produce various biologically active substances. Synthetic phenethyl amine derivatives were also studied. (NEDO)

  19. Study/research report on development of the basic technologies for realization of tera-bit class information storage; Tera-bit kyu joho storage jitsugen ni muketa kiban gijutsu kenkyu kaihatsu ni kansuru chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-19

    The hardware which supports IT is composed of information processing (MPUs and memories), information communication (input/output and communication) and information storage as the three basic elements. This project studies development of the basic technologies for realization of tera-bit (1TB/in{sup 2}) class information storage, in order to cope with drastically increased volume of information as a result of progress of the IT revolution. An HDD (hard disk device) will be the sole device which can correspond to required large-capacity, high-speed storage. However, realization of the recording density for 1TB class storage needs materials and controlling technologies at the atomic and molecular levels, because all of the basic technologies therefor, e.g., those for recording medium, head device and positioning mechanisms, are characterized by nm-order technologies. In other words, it is important to promote the research and development activities for the technologies for three-dimensionally configuring/controlling the atoms, processing magnetic materials at the nm level, and superhigh-speed devices. The concerted efforts by the industrial, government and academic sectors are required for quickly realizing the technological breakthroughs, which need advanced processes based on new principles and development facilities. (NEDO)

  20. Report on a survey in fiscal 1998 for petroleum substituting energy development and utilization in the Pacific Ocean region; 1998 nendo Taiheiyo chiiki sekiyu daitai energy kaihatsu riyo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A survey was carried out to make available the information base that can collect, put into order and provide quickly and accurately the energy related information based on global environment problems in the Pacific Ocean region. Fiscal 1998 has performed a substituting energy demand and supply analysis in the Pacific Ocean region by adding the 1996 data, in addition to collection of the normal energy data. For the purpose of analyzing the petroleum substituting energy demand and supply in the Pacific Ocean region, data were collected from 17 countries for fiscal 1997 and the quarterly data for 1998. Retroactive data collection was also continued. The growth rate of primary energy supply in the Pacific Ocean region is 1.8% in average in the 1980's, and 3.8% in the 1990's. In contrast, the growth rate of petroleum substituting energies is 6.4% in the 80's and 6.2% in the former half of the 90's, being far higher than the growth rate of the primary energy supply. The share of the petroleum substituting energies accounting for in the primary energy supply has increased from 6.7% in 1980 to 12.1% in 1996. As the breakdown, nuclear power accounts for overwhelmingly large, followed by geothermal energy and new energies. (NEDO)

  1. FY 1997 report on the study on development of corrosion-resistant ceramics for refuse incinerators; 1997 nendo chosa hokokusho (gomi shokyakuroyo taishoku ceramics zairyo no kaihatsu ni kansuru kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper describes development of structural materials for municipal refuse incinerators, in particular, high- temperature corrosion-resistant ceramics for inner walls. Unlike boiler tubes of which inner walls are cooled by water or water vapor, refractory for inner walls is subjected to high-temperature flame over 1000degC, corrosive gases such as HCl and SO2. and low-melting point corrosive dust such as chloride, sulfate and oxide under strong corrosive environment. Experiment was made on 14 kinds of ceramics including commercially available oxide system, non-oxide system and refractory system ceramics. Except graphite system ones, every ceramics, in particular, Al2O3, ZrO2, B4C-doped SiC and CVD-SiO showed superior properties. Commercially available ceramics, in particular, non-oxide system ones are very expensive. Since inner wall materials for refuse incinerators are heat-/corrosion-resistant consumption articles, it is suggested that improvement of reasonable oxide system ceramics or conventional SiC system ones is better. 73 refs., 89 figs., 39 tabs.

  2. FY1998 Report of surveys on network possibility involved with proliferation and transfer of environmental technologies (Europe, Australia and New Zealand); 1998 nendo kankyo gijutsu no fukyu iten ni kakawaru network kanosei chosa hokokusho . Oshu Goshu New Zealand

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    At the third Conference of the Parties to the United Nations Framework Convention for Climate Change (COP3) held in December 1997, the industrialized nations have agreed on development and proliferation of innovative technologies under international cooperation and transfer of environmental technologies to developing countries by expanding and strengthening CTI being the framework to be progressed spontaneously. Under the international strategic research project for global environment, NEDO has been promoting positively the research and development, whose support is urged to be expanded further in the future upon receiving the present agreement. Therefore, NEDO has performed the present survey in order to propose frameworks and measures for strengthening and expanding CTI. From among the policies and measures to be taken by the related countries based on the COP3 protocol, fiscal 1997 has performed review and new establishment of plans involved with execution of the items related to technology development, and surveys on action movements such as review and expansion of the measures, as the first stage. Fiscal 1998 has executed surveys focusing on the network for technology proliferation and transfer to developing countries as the second stage. (NEDO)

  3. FY 1998 annual report on the study on development of corrosion-resistant ceramic materials for garbage incinerators; 1998 nendo gomi shori shisetsuyo taishoku ceramics zairyo no kaihatsu ni kansuru kenkyu chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Described herein are the FY 1988 results of development of corrosion-resistant ceramic materials for garbage incinerators. Residue released when porcelain stocks are collected is selected as the inexpensive stock for SiO{sub 2}-Al{sub 2}O{sub 3}-based refractory materials. It is incorporated with carbon black and reduced at 1,200 to 1,500 degrees C in a nitrogen atmosphere. Synthesis of the target Si-Al-C-N-O-based compound succeeds in the presence of a solid catalyst, but it is a fine powder, and hence that of the massive compound fails. The commercial ceramic materials and new refractory materials, made on a trial basis, are evaluated for their resistance to corrosion using fry ashes collected from a commercial incinerator. These ashes are higher in melting point, more viscous, holding a larger quantity of attached slag and more corrosive than synthetic ashes. These materials are corroded acceleratedly as temperature increases to 1,200 degrees C or higher, more noted with the ceramic materials than with the refractory materials. Oxidation and melting characteristics of the molten slag affect corrosion of some materials. Use of the graphite-based material shall be limited to a section below the slag surface, where graphite is oxidized to a smaller extent. The MgO-based material is promising. The Al{sub 2}O{sub 3}-Cr{sub 2}O{sub 3}-based material is more promising than any other material developed in this study. Their bending strength before and after the corrosion test is measured at normal temperature to 1,700 degrees C, to investigate their deterioration by high temperature and corrosion. (NEDO)

  4. Fiscal 1993 investigational study of a model of international cooperation for an environmentally harmony type green technosystem; 1993 nendo Oshu ni okeru haikibutsu shori oyobi recycle no doko ni kansuru chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    For the natural environment preservation, effective utilization of resources, and maintenance of the ecosystem, an international cooperation model was proposed for the environmental harmony type green technosystem. A comprehensive evaluating analysis of a green forest resource, etc. as the global resource, and an intensive extraction of subjects and needs was made. The analysis was conducted of technical possibility and abstract business development effects toward the industrialization with high values added which is in harmony with the environment. As a case study, the Papua New Guinea area, Malaysia was selected and re-evaluated. For this typical tropical forest area, a new technical system was studied based on the natural environment, industry/economy, social/cultural assessment, etc., and a model for industrializing new international cooperation was proposed. For the model making for industrialization, various steps to be taken and conditions to be prepared were studied and arranged for the realization. Upon going ahead with the international technical cooperation, Japan, a large lumber consuming country, needs to always consider the fostering and effective use of lumber resource in particular. 27 refs., 28 figs., 30 tabs.

  5. Research report for fiscal 1998. Basic research for promoting joint implementation, etc. (modification of heating furnaces of three refineries at Kuiibyshev, Syzran, and Novokuibyshev); 1998 nendo chosa hokokusho. Kuiibyshev, Syzran, Novokuibyshev 3 seiyusho kanetsuro kaizo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A study is conducted about the CO2 reduction effect to be achieved by modernizing the 130 tube-type heating furnaces of the above-named three refineries in Russia. Chosen especially for the study are 39 heating furnaces which are the essential refinery facilities that require urgent energy related measures. Based on the outcome of the study, modification plans are formulated and rough designs are drawn, which involve the replacement of antiquated furnaces by high-performance new-design furnaces, installation of waste heat recovery facilities such as preheating convection sections and air preheaters, reinforcement of furnace wall insulation materials, installation of optimal control systems for furnace operation, modification of fuel supply systems for higher efficiency, installation of decoking systems, etc. After the modification, the heating furnace thermal efficiency will be secure at 90% at the lowest. After the application of this energy efficiency enhancement project, CO2 emission will be reduced by approximately 480,000 tons/year for the 39 chosen furnaces or by approximately 1,200,000 tons/year for all the 130 heating furnaces. (NEDO)

  6. Fiscal 1998 research report. Popularization project of the proper treatment technology of industrial wastes in Asian regions; 1998 nendo chosa hokokusho. Asia chiiki sangyo haikibutsu tekiseika shori gijutsu nado fukyu sokushin jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Study was made on popularization of the proper treatment technology of industrial wastes in Asian regions. In principle, industrial wastes should be recycled in a country concerned, however, because of a difference in technology and industrial location, treatment of all industrial wastes in a country concerned is impossible. International cooperation is thus indispensable to promote proper efficient practical measures for environment. For studying the possibility of the international cooperation between Japan and Asian countries concerned for further recognition and solution of industrial waste problems, 'International Symposium on the Asian Industrial Waste Issue' have been held in Tokyo since 1997 for governmental staffs. In fiscal 1998, Malaysia was invited in addition to China, Philippines and Thailand for popularization of the proper treatment and recycling of industrial wastes in Asian regions. In every Asian countries, poor collection of discharge, treatment and disposal data is an obstacle to effective treatment. Technical cooperation and financial support by developed countries are demanded. (NEDO)

  7. Survey report for fiscal 1998. Evaluation by industrial circles of the COP3 outcome and their future response (America); 1998 nendo chosa hokokusho. COP3 no kekka ni taisuru sangyokai no hyoka oyobi kongo no taio ni tsuite (Beikoku)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Response in America to COP3 (Third Session of the Conference of the Parties to the United Nations Framework Convention on Climate Change) is investigated. Office of Energy Efficiency and Renewable Energy (EE) of America's Department of Energy conducts activities designed to protect environments and supports America's economic competitiveness. The scope of EE activities is quite wide, covering efforts at energy efficiency improvement and renewal energy utilization for all energy consuming sectors involving construction work and equipment for buildings, various industries and public utility works, and transportation. EE also supports and promotes the development of advanced industrial materials, electric vehicles, hybrid vehicles, fuel cells, etc. In the field of renewable energy, it deals with the exploitation of sunlight, biomass, wind force, water power, geothermal energy, etc. It also supports efficiency improvement efforts being undertaken through studies of advanced power transmission and distribution, high-temperature superconduction, energy storage, etc. The said supports are provided not only by Federal Government but also by state governments, and include financial aids. A number of programs are under way, worked out and promoted by the respective bureaus and departments. They are evaluated, protected, and implemented through the partnership of official and civilian organizations. (NEDO)

  8. Fiscal 1998 research report on the development trends of natural gas conversion technologies into liquefied fuel in Russia; 1998 nendo Roshia ni okeru tennen gas no ekitai nenryoka gijutsu no kaihatsu doko nado ni kansuru chosa kenkyu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Russia having natural gas resources largest in the world is actively promoting the basic research on liquefaction technology of natural gas such as Fischer-Tropsch (FT) synthetic catalyst, and its research potential is extremely high. This 3-year research project surveys the R and D trends of catalyst technology for liquefaction of natural gas, and fabricates the prototype FT synthetic catalyst based on the idea of Russian researchers to evaluate its feasibility experimentally. This report summarizes the following to clarify the research background: (1) The technology system for liquefaction of natural gas, and its future R and D trend, (2) The R and D trends of liquefaction technology of natural gas in the world, (3) The R and D trends of liquefaction technology of natural gas in Russia, (4) The research system of catalyses in Russia, (5) The activities of Russian catalysis research institutes, (6) The fuel liquefaction technologies of Russian major research institutes, and (7) The proposals from Russian research institutes. (NEDO)

  9. Fiscal 1999 survey report. Survey on use of reproducible energy in Oceania and on feasibility of future introduction; Oseania ni okeru saisei kano energy riyo jokyo to kongo no kanosei chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Survey was conducted on the actual state and the potentiality of reusable energy (RE) in the South Pacific nations. The countries to be surveyed were Australia, New Zealand, Papua New Guinea, the Fiji, the Republic of the Marshall Islands, and the Republic of Nauru. The subject RE are photovoltaic power (PV), solar heat, wind force, biomass, hydraulic power and geotherm. The survey items were as follows; RE policy and promotion programs, technical level of makers, RE supply areas and population for independent/linking type electric power systems, population of non-electrification areas, meteorological data, foreign investment policy, feasibility for introduction if RE not yet introduced, and potential of promotion if RE already introduced. Propositions are as follows. Australia and New Zealand, having a comparatively large population and a stable government, are the two most important markets for RE technologies. The South Pacific nations have a markedly small population, providing a limited market for RE systems. Papua New Guinea, being a country possessing natural gas resources, has a chance of developing photovoltaic and fossil energy hybrid systems. The Fiji shows possibility for hydraulic, wind force and biomass power generation. (NEDO)

  10. Research report of fiscal 1997. Joint research project on petroleum substituting energy between Japan and the EU; 1997 nendo chosa hokokusho. Nichi EU sekiyu daitai energy kanren kyodo kenkyu jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Four researchers were invited from EU countries to promote R & D of petroleum substituting energy in Japan, and the joint research was made in institutes of Agency of Industrial Science and Technology related to each theme for 50 days. On the research on deep geothermal prospecting based on volcanic halocarbon group, it was showed that halocarbon discharged from volcanic or hydrothermal system is an important window to survey activities within the earth. On the research on catalyst for hydrogenation of coal-derived liquid, XPS data was reported, and some preliminary conclusions were obtained. On the research on oxide system anode material for Li secondary cells, a method for improving the state of host to ion moving in 1-D to 3-D networks by diffraction method was showed. In particular, the method was effective to offer electronically sensitive environment to moving ion system. On the research on hydro-dechlorination of hydrocarbon halide, the theme related to environmental measures against waste hydrocarbon halide (depletion of the ozone layer) was studied. 83 refs., 32 figs., 20 tabs.

  11. FY 1994 Report on the results of the joint research project for optimum introduction of development of fuel cell technologies for urban energy centers; 1994 nendo toshi energy center nado nenryo denchi gijutsu kaihatsu saiteki donyu chosa seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-05-01

    Described herein are the FY 1994 results of the joint research project for optimum introduction of development of fuel cell technologies for urban energy centers or the like. The necessary economic conditions for introduction of a fuel cell system to be competitive with the conventional system which individually supplies electric power and heat are 250,000 yen/kW as the construction unit cost, 0.10m{sup 2}/kW as the installation area, 5 years as the cell body life, use of an inexpensive fuel gas (2 to 6 yen/Mcal). Moreover, it is an indoor system which shall have the operational characteristics to follow daily demand fluctuations while operating under the optimum conditions in the urban redevelopment area considered. A 5,000kW-class fuel cell plant burning fuel gas (2 yen/Mcal) will need a total floor area of approximately 400,000 m{sup 2} in an energy-intensive office type demand area. These conditions shall be met in order to economically introduce the 5,000kW-class plant. It is also necessary to compare the plant with the competitive cogeneration plants. The specifications for the prototype now under consideration are sufficient for the energy-saving effect, and it is premised that these specifications and characteristics are secured. (NEDO)

  12. FY 1997 report on the study on the formation condition of hetero-structure of single-crystalline semiconductor thin films; 1997 nendo chosa hokokusho (tankessho no handotai usumaku hetero kozo no keisei joken ni kansuru kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Since ion implantation causes material degradation by formation of crystalline defects, and hydrogen embrittlement deteriorates material strength, reduction of such defects has been positively studied. Study was made on a new active application of hydrogen separation into ion implantation defects. After H ion implantation of a proper depth into single-crystalline Si and SiC and successive annealing, single-crystalline films of sub-micron to several micron thick were obtained by hydrogen-induced delamination at the implantation depth due to hydrogen embrittlement in crystalline defects. The implantation depth is dependent on implantation energy. H atom forms (111) face defect through connection with dangling bond of crystalline defects. This crystal face defect forms a delamination plane through (100) face cleavage. This hydrogen embrittlement delamination by ion implantation is applicable to production of light-weight high-efficiency single-crystalline Si solar cells, and large single-crystalline SiC wafers as new resource saving process. 33 refs., 19 figs., 2 tabs.

  13. Fiscal 1995 survey of promotion of the geothermal development. Report on a usage feasibility test of a small scale geothermal binary cycle power generation system; 1995 nendo chinetsu kaihatsu sokushin chosa. Chusho chinetsu binary hatsuden system jissho shiken hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    In this survey, studies for popularization and practical utilization of small and medium size geothermal binary cycle power systems which assesses low and medium temperature geothermal resources were conducted, and studies for development of the system to be introduced for practical use and for promotion of the popularization were made. A study was carried out of preconditions and various conditions of a demonstrative test plant (100kW class, 500kW class) in view of the initial cost of the actual plant, and an analysis was made of the power generation cost. Acceptability of the demonstrative test plant (100kW class) was examined to analyze problems on the introduction. A thermodynamic analysis was made of the output of geothermal binary cycle power generation. Analysis/evaluation of the results of the 100kW demonstrative test plant were carried out in view of the operation results of the plant of the same kind, and checks/reviews were conducted of performance and reliability of the system, equipment simplification, etc. Inspection of the system was made in the stage of design/manufacture of the 500kW demonstrative test plant. Concerning the spread/expansion of the system, studied were multiple stage geothermal utilization and PR promotion method. 14 refs., 62 figs., 55 tabs.

  14. Survey report of FY 1997 on the global environmental industry technology development promotion project. International research exchange project; 1997 nendo chosa hokokusho. Chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo (kokusai kenkyu koryu jigyo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Exchange of personnel among foreign research organizations is significant for promoting research and development to create new research fields and to build new technological systems for the purpose of solving global environmental problems. For this purpose, researchers were sent/invited to/from international conferences and international symposiums related to global environmental technology and exchange of personnel with major foreign research organizations and universities was conducted under the cooperation of RITE and RITE-related researchers and related academic societies. Based on short-term invitation and sending of researchers as well as the feasibility study of researcher exchange, researchers were sent/invited on long- and mid-terms. As a result, exchange of personnel engaged in the latest research in Japan and overseas could be promoted. It was found that various researches are being conducted abroad in basic areas of global environmental technology. Since they are closely related to the research and development of industrial technology contributing to global environmental preservation promoted by RITE, it is important to establish a more efficient exchange system of researchers in the future. 91 refs., 38 figs., 14 tabs.

  15. Fiscal 1999 technical survey report. Model project implementation feasibility study in Malaysia on effective utilization of waste heat from paper sludge incineration; 1999 nendo Malaysia ni okeru seishi sludge nensho hainetsu yuko riyo model jigyo jisshi kanosei chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Efforts are under way to popularize practical energy conservation technologies through verification on real machines in target countries. Possibilities were studied that Malaysian paper making plants would adopt technologies of collecting heat from high-temperature exhaust gas from paper sludge incineration and of effectively utilizing the thus-collected heat. The Malaysian paper making industry produced 800-thousand tons or more in 1998, covering 72% of the total national demand. Heat recovery facilities may be installed in 15 plants. On-site surveys were made into their actual states, and then Genting Sanyen Industrial Paper Sdn. Bhd. was selected as the plant for the model project, and detailed model project feasibility studies were conducted. The studies covered the amount of wastes from paper making, their properties, treatment process, amounts of utilities to be used during system operation, land on which to build the facilities, and a plan for collecting invested funds. As the result, it was concluded in view of the magnitude of the expected fruit that the model project be implemented at this plant. (NEDO)

  16. Fiscal 1993 investigational report on the strengthening of the resource/energy industrial basis of CIS Central Asia (the Republic of Kazakhstan); 1993 nendo CIS Chuo Asia (Kazafusutan kyowakoku) no shigen energy sangyo kiban kyoka ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-05-01

    The paper grasps the present situation of economy and industry in Kazakhstan and studies a policy for developing the industrial machine manufacturing industry of the country. Since the independence in 1992, the country is now at the great turning point in politics, economy, society and industry. The country is forced to convert from the industrial structure of one local area where much of its own discretion had not been given under the economy system of power centralization to the industrial structure which meets the international economic market system as an independent country. Making good use of agricultural and industrial property in the former U.S.S.R., the country needs to export energy resource like oil, natural gas and coal, and abundant ore resource like iron and non-ferrous metal, which were added with values. As the technical base for it, fostering and strengthening of the industrial machine manufacturing industry is important. At present, the situation is that because of the economic sluggishness, the country cannot manufacture domestically even basic mechanical parts and simply-manufactured parts which are required by the domestic energy industry, machine manufacturing industry, and other industries. The technical program to be proposed by Japan is planned to be worked out later based on the basic research made in fiscal 1993. 6 figs., 14 tabs.

  17. Fiscal 1998 research report. Study on the feasibility of microorganism biotechnology for effective use of environmental pollutants. Pt. 2; 1998 nendochosa hokokusho. Kankyo osen busshitsu no shigenka no tame no biseibutsu bio technology riyo kanosei ni kansuru chosa. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Study was made on the feasibility of microorganism biotechnology for effective use of environmental pollutants and unused resources. Microorganisms and microorganism enzymes for decomposing lignocellulose were viewed, and uses of hydrolysis products were summarized. Production of microorganisms applicable to fodder, composting, and production of energy sources (methane, hydrogen, ethanol) were studied. Use of vegetable fiber residues such as beer lees as fungus cultivation medium and conversion to valuable substances were also studied. Microorganisms treatment (MT) of wastes in fats and oils industry was summarized. Effective use of MT of protein waste from marine products was studied. MT of manures with the greatest impact on environment as livestock waste was summarized. The necessity of separate collection of domestic wastes, and composting and methane fermentation of kitchen garbage were reported. The feasibility of MT of plastic wastes, and decomposition of halogenated methane with high toxicity were also studied. (NEDO)

  18. Fiscal 1999 geothermal development promotion survey report. Data processing (No. B-5 - Musadake region - Phase 3); 1999 nendo chinetsu kaihatsu sokushin chosa data shori hokokusho. No. B-5 Musadake chiiki (Dai 3 ji)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-01-01

    A comprehensive analysis was conducted into the results of a survey on the state of existence of geothermal energy resources in the Musadake region, Shibetsu-gun, Hokkaido. The region was volcanically active in the period from the Neogene period into the quaternary, with some volcanos still active even today. The geological structure on the whole is characterized by the Musadake/Mt. Shitabanupuri fault which is the major structure running NNE-SSW and having a folding structure. It is inferred that Musadake is the heat source responsible for the underground temperature distribution in this region. The maximum temperature of 274 degrees C is recorded at borehole N11-MD-3 in the northeastern part of Musadake, and the temperature falls rapidly as the distance from the borehole increases. Ejection of geothermal fluids is observed at boreholes N11-MD-3 and N11-MD-4. It is inferred that the deep-seated geothermal water is of the neutral Cl type with Cl concentration estimated at approximately 12,000 mg/liter. Steam composition is characterized by a gas concentration level that is as high as 3-4 vol.%. The gas is composedly mainly of CO2 and contains some hydrocarbons. Fluids in this region are classified into water mixing into deep-seated geothermal water and groundwater originating in meteoric water. (NEDO)

  19. FY 1995 report on verification of geothermal exploration technology. Development of fracture reservoir exploration technology (development of seismic exploration); 1995 nendo chinetsu tansa gijutsunado kensho chosa. Danretsugata choryuso tansaho kaihatsu (danseiha riyo tansaho kaihatsu) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This report provides the development of new exploration technology using elastic waves, such as reflection seismic survey, VSP, and seismic tomography, for precisely characterizing subsurface fractures in geothermal reservoirs. In order to investigate and improve the effective data acquisition and analysis methods for detecting a fault type of fractures, an experiment of a seismic tomography method was conducted using wells drilled in the Ogiri geothermal field, Aira-gun, Kagoshima Prefecture. An experiment of propagation characteristics of piezo type underground seismic source in the volcanic field was also conducted as a trend survey of underground seismic sources. The fracture type in the model field was systematically analyzed by measuring the core samples obtained in the demonstration test field through remanence measurement, fluid inclusion measurement, and zircon measurement using test equipment, and by analyzing results obtained from cores and results of seismic tomography obtained from the wells. Based on these results, the effectiveness and practical application of exploration methods using elastic waves were investigated. 80 refs., 250 figs., 49 tabs.

  20. Report on fiscal 1992 geothermal development promotion survey data. No.A-1 Mannenyama area (first); 1992 nendo chinetsu kaihatsu sokushin chosa data shori hokokusho. No.A-1 Mannenyama chiiki (daiichiji)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    A synthetic analysis was made of the results of the fiscal 1992 survey on geothermal resource existing in the Mannenyama area. The area surveyed is located at the central-west part of Oita prefecture, belonging to an administrative division of Kusu-machi and Kokonoe-cho, Kusu-county, Oita pref. The area surveyed was approximately 280 km{sup 2}. As signs of existence of geothermal energy, there are seen hot springs and alteration zones there. In the Takigami district neighboring the south-east part of the area, construction of a geothermal power plant is being planned. From a synthetic consideration of various investigations, the region round the Inomuta sedimentation zone is considered to be a district satisfying conditions for existence of geothermal resource and a promising geothermal district, where Takigami, Otake, Hachoubaru and Okuni are widely included. In the area surveyed this time, the area around Noya-Mizuwaketouge seems to be the most potential for geothermal resource, judging from the alteration status, abnormal mercury concentration, fault state structure and spread of the low resistivity zone. Also in the south and the north-east of the area, geothermal activities can be estimated. 99 refs., 194 figs., 52 tabs.

  1. Basic investigation on promotion of joint implementation in fiscal 2000. Energy conservation measure project for Ahwaz Steel Complex in Iran; 2000 nendo kyodo jisshi nado suishin kiso chosa hokokusho. Iran Ahwaz seitetsusho ni okeru sho energy taisaku jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    With an objective to save energy and reduce greenhouse gas emission, a project has been discussed to introduce a gas turbine combined cycle power generation system for effective waste heat utilization and a pellet coating facility into the direct reduction steel making plant of Ahwaz Steel Complex in the Islamic Republic of Iran. The project will have a waste heat boiler installed at the outlet of the MIDREX plant waste heat recovery device to link it with a gas turbine combined cycle power plant to structure a 42-MW power generation system. In addition, productivity enhancement was attempted by applying the raw material pellets with coating to raise the reduction gas blow-in temperature. The energy saving effect expected from this project would be saving of 63,140 tons of crude oil equivalent annually, and the greenhouse effect gas reducing effect would reduce 173,790 t-CO2 annually. Although the investment will require about 3.16 billion yen, the cost reduction amount in association with power generation is small because of the power purchase unit cost being as very low as 1.9 yen/kWh, making the investment recovery period 10.2 years. Therefore, the project will not be realizable economically. (NEDO)

  2. Fiscal 1997 survey report. Preparatory survey for a manual on the introduction of high efficiency thermal utilization systems; 1997 nendo chosa hokokusho. Kokoritsu netsu riyo system donyu manual no sakusei choa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    To cope with the energy issue and global environmental issue, it is necessary to forcibly promote energy conservation. In the light of the present situation that in Japan only 1/3 of the primary energy consumed is effectively used, policies are being prepared for promotion of the introduction of high efficiency thermal utilization systems including `a project for formation of the environmentally friendly type energy community` promoted by NEDO. However, it is hard to say that the introduction is being actively promoted. The cause is that they do not fully understood the present status of high efficiency thermal utilization systems, procedures for introduction, subsidy system, etc. Therefore, a manual was made to present to self governments and enterprisers who are planning to introduce the system. To be concrete, there are the six systems: cogeneration use thermal supply system, unused energy use thermal supply system, heat storage use thermal supply system, waste use thermal supply system, plant surplus energy use thermal supply system, and cascade type thermal supply system. 28 refs., 38 figs., 42 tabs.

  3. FY 1997 report on the survey of fundamental technologies in the field of brain neuro-biotechnology; 1997 nendo Sendo kenkyu hokokusho (noshinkei saibo kogaku kiban gijutsu no chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In Japan with its rapidly aging society, fundamental technologies are required for the development of artificial nerves substituting for or supporting damaged ones, and ultimately constituting artificial neurons based on the knowledge of the brain functions at the molecular and cellular levels. This study defines the fundamental technologies which would be required for the development in the area, and further, evaluates the potential of the technologies to develop the novel industry. The brain function is closely related to the activity in neuronal circuits. In order to repair injured nerves and to develop the advanced technologies of electronics for helping impaired neuronal functions, the most important and urgent is to understand how to work the neuronal circuit system in the brain. Based on these viewpoints, new methodological approaches would make it possible to relieve neural impairment in the sensory input system and the motor system by the use of electronic circuits. They also would improve rehabilitation after injury, and treat neurodegenerative diseases such as Parkinson`s disease. These advances surely create the new types of industry seeds in near future. 77 refs., 29 figs., 2 tabs.

  4. Report on achievement in developing an ultra low loss power element technology. Survey on practical application of the next generation power semiconductor devices; 1998 nendo choteisonshitsu denryoku soshi gijutsu kaihatsu seika hokokusho. Jisedai power handotai device jitsuyoka chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Trends were surveyed for development of an ultra low loss power element. Performance improvement has been progressed on power semiconductor elements by using Si as the raw material, but loss reduction has come close to the physical limit. SiC is expected of possibility to go beyond this limit. SiC is so very excellent that its band gap is two to three times greater, insulation breakdown electric field is 7.5 times higher, temperature to become a true semiconductor is three to four times higher than those of Si. The wide gap can reduce high temperature leaking current in p-n junctions, and the increased authenticity temperature can increase the upper limit for operation temperature. The insulation breakdown strength being higher by one digit can reduce the drift layer thickness, and is expected to dramatically reduce the loss. The problem is that high quality crystals have not been obtained to date. One of the promising application fields is electric vehicle. The device currently using the power element in the largest scale is used in frequency converting stations to link the 50-Hz power network in the eastern part of Japan to the 60-Hz network in the western part of Japan. Surveys were carried out on the Sakuma frequency converting station and the New Shinano substation. (NEDO)

  5. Basic investigation on promotion of joint implementation in fiscal 2000. Efficiency improvement project for gas turbine power plant in Iran; 2000 nendo kyodo jisshi nado suishin kiso chosa hokokusho. Iran gas turbine hatsuden plant no koritsu kaizen project

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Investigations and discussions have been given on measures to improve energy conservation and efficiency at a power plant of Kish Water and Power Company (KWPC) in Iran. The site has high ambient temperature throughout a year, making the gas turbine power plant capable of generating power only at about 70% of the rated output, with the power generation efficiency decreasing. The project has analyzed the current situation at the plant, and evaluated different means that appear effective in improving the efficiency, including the gas turbine absorbed air cooling system, the steam injection system, and the combined cycle. As a result of the discussions, it was revealed that energy saving effect can be obtained at 145 TJ with the gas turbine absorbed air cooling system, 224 TJ with the steam injection system, and 1017 TJ with the combined cycle. The annual reduction of greenhouse gas emission due to the above energy conservation would be about 11 thousand tons, 16.5 thousand tons, and 75 thousand tons, respectively. However, the investment payback period would be about 2.45 years, 8.31 years, and 14.21 years, respectively. Therefore, the profitability does not appear very attractive because of low fuel unit cost. (NEDO)

  6. Fiscal 1999 research result report. Research on improvement of boiling heat transfer characteristics by photocatalyst wall; 1999 nendo hikari shokubai hekimen ni yoru futto netsu dentatsu tokusei kaizen ni kansuru kenkyu chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Research was made on improvement of the wettability and boiling heat transfer characteristics of a photocatalyst wall. Measurement experiment of the wettability was made for anatase type titan oxide-coated Al, SUS and Pb plates, rutil type titan oxide-flame coated SUS plate, raw plate, and oxide-plasma coated titan plate. In the ground experiment, the contact angles of distilled water and oil on specimen surfaces were measured. In the microgravity experiment, falling droplet images were recorded by using the facility of Japan Microgravity Center (JAMIC). For obtaining the effect of radioactive emission, UV irradiation, {gamma} ray and neutron beam irradiation by nuclear reactor, and {gamma} ray irradiation by Co-60 were carried out. As the experiment result, the rutil type titan oxide-flame coated SUS plate, nonconductor-coated titan plate, and zircaloy plate showed large improvement of the wettability by {gamma} ray irradiation with Co-60. It was also confirmed that in particular, titan shows the large effect of radioactive emission, and the wettability deteriorates rapidly after {gamma} ray irradiation. (NEDO)

  7. FY 1998 annual report on the survey on development, introduction and promotion of urban type multipurpose geothermal utilization techniques; 1998 nendo toshigata tamokuteki chinetsu riyo gijutsu no kaihatsu, donyu, sokushin ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Introduction of geothermal heat pump systems, which depend on temperature differential, is investigated for urban areas, which have large energy demands. Results of the surveys on the current situations of geothermal heat pump (GHP) systems indicate that they have already numbered 300,000 units in USA and totaled more than 50,000 units in Switzerland and Northern European countries, and that they are increasing at an annual rate of higher than 10%. The results also indicate that introduction of these systems are well feasible in Japan, which generally has better topographical conditions than American and European countries, and the GHP system with vertical ground heat exchanger is investigated for its topographical and environmental considerations. These systems could annually abate approximately 52 million tons of CO2 (4.3% decrease), if disseminated to all households. They are also expected to help control the heat island phenomenon, and reduce peak power consumption. The technological problems to be solved before these systems are massively disseminated including development of small scale drilling rigs and preparation of drilling manuals. System standardization and introduction of subsidy systems are also needed to massively disseminate these systems. (NEDO)

  8. Survey report for fiscal 1998. Survey of the current state and tasks of research and development of technologies for effectively utilizing CO{sub 2} fixation by higher vegetation; 1998 nendo chosa hokokusho. Koto shokubutsu ni okeru nisanka tanso koteika yuko riyo gijutsu no kenkyu kaihatsu no genjo to kadai ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Investigations and studies are conducted seeking for a CO2 fixation method improved by utilizing the photosynthesizing function of higher vegetation. Details of higher vegetation genes are being disclosed thanks to the rapid progress of studies making use of molecular biological techniques, and the application of the genetic mechanism to scientific and technological fields is becoming increasingly feasible. In particular, the role of the CO2 fixation enzyme RuBisCO has been elucidated almost completely. It has been learned that, in terms of photosynthesizing capability, the C{sub 4} plants (corn etc.) are 2-3 times higher than the C{sub 3} plants (rice, wheat, etc.), and 5-10 times higher than the CAM plants (cactuses etc.). Studies are also under way about the rice genome so that a photosynthesizing capability so high as that of the C{sub 4} plants may be endowed the rice plant. The metabolism and control of useful substances produced in the CO2 fixation process etc. in the higher vegetation are being investigated, and it is now expected that some day such useful substances will be produced and utilized efficiently. Researches are under way into the relationship between the green leaf that is the organ that performs photosynthesis and the organ (sink) that stores and utilizes starch and sugar is in progress, and now a new field is going to open where vegetables will be fully utilized. (NEDO)

  9. Fiscal 1997 survey report. Investigational study on the cascade utilization of thermal energy (cold heat and hot heat) (feasibility study by the off-line system); 1997 nendo chosa hokokusho. Netsu energy (reinetsu to onnetsu) no cascade riyo ni kansuru chosa kenkyu (off-line hoshiki ni yoru feasibility study)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper studied a system to effectively use unused and low-grade thermal energy (cold heat and hot heat) in the Tokyo-Yokohama seaside area. For transportation of thermal energy, the batch transportation, that is, off-line system was discussed which uses insulated tank loaded barges and railroad freight trains. Thermal energy supply sources are 1) 0.3 million kW class thermal power plant, and 2) LNG storage base of 3 million ton/year class. Thermal energy users are Tokyo (Haneda) Airport D.H.C. (District Heating/Cooling Co.), MM 21 D.H.C. and Shin-Kawasaki D.H.C. The cold heat energy supplied to these three is about 1.5 million Mcal/daytimes300 days/year, and the hot heat energy supplied is about 1.33 million Mcal/daytimes150 days/year. Cold heat is obtained from seawater after the LNG vaporization, and hot heat from heat extracted from thermal turbine. Subcooled ice was selected for cold heat medium, and PCM-120A for hot heat medium. For batch transportation, an STL heat storage system is used which transports plastic capsules sealed with heat medium. Oil saving of 62,000 tons/year and CO2 reduction of about 53,000 tons/year can be expected. 85 figs., 98 tabs.

  10. Basic research on energy conservation in developing countries. Basic research on promotion of activities implemented jointly (AIJ) (research on possibility of AIJ in developing countries); Hatten tojokoku energy shohi koritsuka kiso chosanado jigyo kyodo jisshi suishin kiso chosa. Hatten tojokoku ni okeru kyodo jisshi katsudo no kanosei chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The activities implemented jointly (AIJ) is expected as global measures to reduce greenhouse gas (such as CO2) emission. In this report, the possibility of AIJ projects in developing countries was researched. The United Nations Framework Convention on Climate Change was signed by 155 countries in 1992. This convention parties approved AIJ projects for measures against global warming. The 1st Conference of the Parties (COPI) held in 1995 approved the pilot phase of AIJ by voluntary workers jointly with developing countries until the end of this century. The trend, level and future plan of energy conservation technologies were researched and analyzed for steelmaking, cement and electric power supply industries in both the Philippine and Thailand. The possibility of AIJ projects was studied by selecting several Japanese energy conservation technologies transferable to both countries. The same research was also carried out for forest as carbon absorption source. 5 refs., 23 figs., 58 tabs.

  11. FY 1999 report on the survey of Research Association for biotechnology development. Trend survey on the structural analysis of full length cDNA; 1999 nendo biotechnology kaihatsu gijutsu kenkyu kumiai chosa hokokusho. Kanzen cho cDNA no kozo kaiseki ni kansuru doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Recognizing that the acquisition and structural analysis of full length cDNA clones are important subjects for connecting genome study and proteomics, survey was made of projects and technical trends in each country. The results of the survey were divided into the following four items: 1) trend of full length cDNA projects overseas; 2) study of full length cDNA in Japan; 3) full length cDNA project in Japan; 4) survey on technical trends of the structural analysis of full length cDNA. In 4), studies were made on the following: trend of technical development on the structural analysis of full length cDNA, trend of patents on the making of full length cDNA library, outline of the technology for the making of full length cDNA library. Countries for survey were the U.S., Japan, Germany, France and the U.K., and patents for survey were Japan open patents, U.S. open patents and WPI patents. For reference, included were seven data on full length cDNA related general remarks in Japanese, full length cDNA library related papers in English, full length cDNA related trend in Japan, etc. (NEDO)

  12. Research report for fiscal 1998. Basic research for promoting joint implementation for CO{sub 2} reduction at Keio University; 1998 nendo chosa hokokusho. Keio Gijuku Daigaku ni yoru CO{sub 2} sakugen no tame no kyodo jisshi suishin kiso chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A research is conducted into China's current problems of energy-related environments, and studies are made for the assessment of its potentials for greenhouse gas reduction, such as CO2 from coal, and for the prevention of environmental pollution in urban areas. By the survey of the current states of the supply and demand of energy and heat in China, and in Beijin, it is found that fuel conversion, which means the disuse of coal in this case, is necessary for a success in SO2 measures in the heat supply department. Since the rate of concentrated heat supply undertaken by heat supply businesses is low, it is inferred that potentials for CO2 reduction are quite high in this department. Concerning technological problems about conversion from coal to natural gas and heat supply, deliberation is made on a scenario covering how to approach the energy demand model, combustion in the natural gas boiler, and the home heating fuel. In discussing air pollution in China, the difficulty known as transboundary air pollution is taken up. It is concluded that conversion from coal to natural gas or coal disuse will serve effectively the purposes of energy saving, SO2 reduction, and CO2 reduction. (NEDO)

  13. Fiscal 1997 report on the survey for a data book on new energy technology development. Waste power generation, solar energy utilization. geothermal power generation, clean energy vehicles, coal liquefaction/gasification, and traverse themes; 1997 nendo chosa hokokusho. Shin energy gijutsu kaihatsu kankei data shu sakusei chosa (haikibutsu hatsuden, taiyonetsu riyo, chinetsu hatsuden, clean energy jidosha, sekitan ekika gas ka oyobi odanteki theme)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper collected and arranged data on new energy technology. As to the waste power generation, in terms of general waste, 161 places have power generation facilities, 657,000 kW in output, as of the end of FY 1996. Out of them, 100 facilities (scale of output: 555,000 kW) are selling power. In terms of industrial waste, 53 places (209,000 kW) have power generation facilities. The output will be 2 million kW in FY 2000. In relation to the solar energy utilization, the number of solar systems introduced in FY 1996 is 25,000, that of water heating appliances produced in FY 1996 is 170,000. Geothermal power of 494,000 kW and 37,000 kW was introduced for electric power industry use and private use, respectively. Clean energy vehicles have not been so much spread, but the hybrid car was put on sale in 1997. Concerning the coal liquefaction, the R and D were made at a pilot plant of NEDOL process, and operation started in 1997. As to the coal gasification, investigational study and element study on the demonstration plant are being conducted in FY 1997 and 1998, making use of the research results obtained from the existing pilot plant of coal gasification combined power generation

  14. FY 1998 geothermal development promotion survey. Report on the environmental effect survey (hot spring/water level/spring water, No. C-3 Akinomiya area); 1998 nendo chinetsu kaihatsu sokushin chosa. Kankyo eikyo chosa hokokusho (onsen suii yusui, No.C-3 Akinomiya chiiki)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-04-01

    As a part of the FY 1998 geothermal development promotion survey, the results were summed up of the environmental effect survey conducted at the Akinomiya area of Ogachi-gun, Akita prefecture. In the survey, the drilling of N9-AY-4 exploration well and short-term injection tests of N8-AY-2/N9-AY-3 were carried out in the area. The survey was made aiming at grasping the effects on hot spring/ground water level/spring water in the area. The methods used for survey were surveys of hot spring variation, ground water level variation, precipitation, rivers, all spring sources, and analyses of hot spring water/spring water in the Akinomiya area. As a result of the survey, in hot spring/ground water level/spring water, no variations were recognized which were caused by the drilling of N9-AY-3/N9-AY-4/N9-AY-5 exploration wells and short-term injection tests of N8-AY-2/N9-AY-3 exploration wells. Moreover, since few changes of spring water quality were seen also in the result of the survey of all spring sources, it was judged that the drilling and short-term injection tests of the exploration wells described above have no effects on the hot spring, ground water level and spring water in the Akinomiya area. (NEDO)

  15. Fiscal 1998 research report. Improvement project of low-grade coals in Chongqing City, China for CO{sub 2} reduction (Feasibility study on the production business of coal- biomass briquette); 1998 nendo chosa hokokusho. CO{sub 2} sakugen no tame no Chuka Jinmin Kyowakoku Jukei chokkatsushi no teihin'i sekitanshitsu no kaizen project (Bio briquette seizo jigyo no chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Feasibility study was made on the effect of introduction of production technology of coal-biomass briquette (Japanese coal improvement technology) in Chongqing City on reduction of greenhouse effect gases and acid rain causative substances, and sustainable economic growth. The study result on the feasibility of this project and reduction of greenhouse effect gases was summarized. In this feasibility study, Japan-China joint field survey, and both proximate and ultimate analyses of obtained raw materials were carried out. Based on the experimental result in the pilot briquette plant in Chongqing City, study was made on the necessary of the 1 Mtons/y class pilot plant in the pilot area including Nantong coal mine in Chongqing City, and the location, investment, production cost and distribution means of the plant. Based on the evaluation result on CO{sub 2} reduction effect, economical efficiency, environment effect and social effect, its urgency and effectiveness as international cooperation project by yen credit were also confirmed. It is extremely important to promote localization of the plant in the future. (NEDO)

  16. Report on a project to support promotion of forming an environmentally friendly energy community. Survey on business feasibility of electric power generation utilizing combustible wastes solidified fuel in the Kishu and Kumano living area; Kankyo chowagata energy community keisei sokushin hojo jigyo chosa hokokusho. Kishu Kumano seikatsuken'iki ni okeru kanensei haikibutsu kokeika nenryo riyo hatsuden jigyo no jigyoka kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Surveys and discussions were given on business feasibility of a wide area RDF power generation system in the Kishu and Kumano living area. The discussions dealt with as wide area as transcending prefectural borders and including the southern parts of Mie and Nara Prefectures with the city of Shingu as the central part. Wastes generation amount is estimated to be about 70,000 tons at the present as wastes that can be turned into RDF, and to be decreased to 67,000 tons in 2018. The manufactured RDF has calorific power of 3500 to 4500 kcal/kg, two to three times greater than that of wastes. The RDF manufacturing facilities installed in cities, towns and villages have capacity of 30 to 50 tons a day, with that in the city of Shingu being the largest at about 78 tons a day. Transportation can be implemented most efficiently when road transportation is used. The RDF power generation system will consist of a fluid bed furnace, a plasma type ash melting furnace, and a bag filter plus activated carbon absorbing tower. The RDF manufacturing cost will be 27,900 yen per ton of wastes in the case of the city of Shingu. In terms of business profitability, the RDF power generation must find sources to pay 21,400 yen per ton of RDF even if the power sale revenue is considered. (NEDO)

  17. FY 1995 report on the results of the investigational study on the technology development for the commercialization of solar systems for industrial use, etc. - Investigational study on the solar system. Investigational study on a solar heat utilization system; 1995 nendo sangyoyonado solar system jitsuyoka gijutsu kaihatsu seika hokokusho. Solar system no chosa kenkyu (taiyonetsu riyo system ni kansuru chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This survey clarifies the present situation of the solar heat utilization technology mostly for industrial use, makes a concrete concept of solar heat utilization clear, and extracts items of the technology development and evaluates sociality, economical efficiency, etc. It aims at working out a program for the future technology development. The following proposals were made: 1) technology development program; 2) simulation soft development program; 3) experimental field of the solar heat utilization technology. In 1), concepts of technology development are 'medical use boiling pasteurization,' 'temperature increase in the metal surface treatment process,' 'water purification using photo-catalyst,' 'distributed small power system,' and 'waste water treatment using bio-technology.' In 2), cost reduction is needed for commercialization/merchandising of technology, and therefore, the development of simulation software is studied. In 3), as the experimental field from commercial/residential use system to industrial use system, an large-scale and systematical experimental field is proposed where all that can be substituted for by solar energy among the energies required for the urban function are used. By this, the solar heat utilization system gets accustomed to the people, increases the reliability, and clearly leads to the course to the next stage of the R and D. (NEDO)

  18. FY 1997 report on the verification survey of new mechanisms for load leveling. IEA`s international collaboration `Participation of Japan in IEA/DSM Task VI`; 1997 nendo chosa hokokusho (fuka heijunka shinshuho jissho chosa). IEA kokusai kyoryoku jigyo `IEA/DSM task IV eno sanka ni tsuite`

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Current electricity markets in Europe and the USA are drastically changing due to the introduction of competition principle and the reconsideration of business systems. Are also changing the activities and their forms of DSM (demand side management) for load leveling which has been conventionally conducted by electricity companies for the efficient operation of facilities. Task IV and Task VI aim at developing new mechanisms to promote DSM in the changing electricity markets as well as disseminating and communicating information on the new mechanism. Japan participates in Sub-task IV/6 and 7 and Task VI. Activities for developing new mechanisms are divided into Phase 1 and Phase 2. The Phase 1 includes review of existing mechanisms and preliminary development and evaluation of new mechanisms. The Phase 2 includes the detailed development of new mechanisms and evaluation criteria, communication and information about mechanisms, and identification of the public policy implications which would follow a decision by the responsible authorities to implement each of various DSM mechanisms. The time frame of Phase 1 is between February 1996 and March 1997, and that of Phase 2 is between January 1997 and December 1999. 2 figs., 4 tabs.

  19. Report on the survey made under the research contract with NEDO, `The International Work Division/Energy Demand Effect Survey.`. Influence of the economic growth in Asia on the energy demand; 1996 nendo `kokusai suihei bungyo energy juyo eikyo chosa` itaku chosa kekka hokokusho. Asia no keizai hatten ga energy juyo ni oyobosu eikyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This report includes surveys on the following: (1) the progress situation of the Asian information society, (2) changes of corporate network, business flow, material flow and money flow in association with the information society, (3) the present situation of the industry-accumulated region in Asia and inter-region network, (4) impacts of the above-mentioned changes on the trade and investment structure in Japan, (5) how to tackle the energy issue in Asia in the future. First, effects of the advance of the information society on energy supply/demand were studied. Next, an analysis was made of effects of the progress of the high-grade information society in Asia on economy, industry and corporate action. The degree of the progress of the information society in Asian countries was made clear from the infrastructure arrangement and the developmental status of application. Contribution of the financial network to the economic growth in Asia and the development were clarified. The organization of corporate networks in Asia where paradigms are converting was made clear to consider industrial clusters in Asia. Last, in the light of the economic relationship between Japan and Asia, a study was made on the future policy of Japan for Asia. 238 refs., 77 figs., 89 tabs.

  20. Basic research on energy conservation in developing countries. Joint research on oil conservation (research report on the industrial basis of Socialist Republic of Vietnam); Hatten tojokoku energy shohi koritsuka kiso chosanado jigyo sekiyu shohi koritsuka kyoryoku chosa. Betonamu shakai shugi kyowakoku sangyo kiso chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The field research of oil conservation was conducted in developing countries, in particular, Vietnam where a steep increase in oil consumption is anticipated in the future. Energy conservation is the most effective direct measures to control combustion of fossil fuels, and an important issue to be promoted by all countries in the world to prevent global warming and reserve energy resources. In fiscal 1994, main industries in the northern part of Vietnam were researched. In fiscal 1995, the report meeting of plant survey results in the northern part and the technical seminar of energy-saving in industrial field were held, and plants around Ho Chi Minh City in the southern part of Vietnam were researched. Although Vietnam has recently acquired membership in ASEAN and is undergoing dramatic economic growth, has many problems in environmental measures. Japan has top-ranking results on energy-saving in industrial field, and the transfer of such superior technologies and techniques will greatly contribute to resource and global warming problems as well as pollution control measures in Vietnam. 13 refs., 25 figs., 26 tabs.

  1. Fiscal 1997 basic research on coal resource development (equipment development). Report on R and D of new exploration technology (exploration of medium-depth coal deposits in water areas); 1997 nendo sekitan shigen kaihatsu kiso chosa (kiki kaihatsu hen) hokokusho. Shintansa gijutsu chosa kaihatsu (suiiki chushindoso tansa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report summarizes the research result on development of new coal exploration technology. For a high-precision and high-resolution reflective seismic exploration system, R and D was made on the exploration technology of several meter in resolution for medium-depth (800m) coal deposits under a lake of 2m deep. As a result, the high-frequency and high-power source (150-200Hz in dominant frequency, 700-800m in penetrability) and the high-frequency and high sensitivity receiver (10-1000Hz in frequency band, 35V/PA in sensitivity) were developed successfully, and the positioning system was improved. The final evaluation of these elementary technologies was carried out through demonstration tests, resulting in satisfactory results. For a high-efficiency trial drilling system, the in-bore trouble prevention system for measurement, processing and analysis of drilling data (drilling length, drilling rate, revolution, bit load, torque) and drilling mud data (charge water pressure, charge/discharge water, density, pH, viscosity) was constructed. The outlook for low-cost measurement and a safety during drilling was thus obtained. (NEDO)

  2. Report on a commercialization fundamental investigation (in Palakan Area, East Kalimantan, Indonesia) in relation to FY 1997 investigations on geological structures in overseas countries; 1997 nendo kaigai chishitsu kozo nado chosa ni kakawaru kigyoka kiso chosa (Indonesia Higashi Kalimantan shu Palakan chiku) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    A fundamental investigation was carried out on coal mine development in Palakan Area, East Kalimantan, the Republic of Indonesia. Based on the existing information available from geological investigations having been performed to date, including trial drilling, the present investigation carried out mapping surveys for new access roads to each trial drilling location and coal bed investigations on the existing open-cut mining sites. The trial drilling investigations were conducted by using grids with about 500 meter interval to identify existence status of coal beds and coal quality. Seven drillings to depths of 170 to 230 m resulted in a total drilling length of 1350 meters. Trial drilling samples were collected from all beds in major coal beds, and analyzed in Japan according to JIS standard. Overall geological analysis including coal quantity calculation by coal beds, open-cut sites and underground mining sites was executed from available geological sketches, geological histograms, coal bed histograms and other existing items of information. Evaluation was given on potentiality of the investigated areas for coal development based on the above analytical results. In addition, infrastructure related investigations were also performed. 29 refs., 114 figs., 37 tabs.

  3. Report on the fiscal 1993 investigational study of the environmental technology development trend in Japan. Trend survey of the introduction policy of environmentally friendly products; 1993 nendo Nippon ni okeru kankyo gijutsu kaihatsu doko nado ni kansuru chosa kenkyu hokokusho. Kankyo chowagata seihin no donyu hosaku nado doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-05-01

    An investigation was conducted into the systematical scheme for the introduction and promotion of environmentally friendly products mostly to the U.S., Europe and China. In the U.S., the introduction policy is given to one and all fields of the industry. The introduction policy of the U.S. has a characteristic that the introduction is left to the market principle by DSM or permit dealing, etc. except the preferential tax system and systematical finance in which the government is concerned. The policy of European countries is characterized by the idea preceding, standards or rules are first given, and the whole is pushed on to them. Accordingly, it seems that there is few atmosphere of expecting to receive the government side economic incentives from the corporate side. Legal regulations on the environment in China were prepared in a comparatively early time (1979), but the supervision of obeying the regulations and the appearance/spread of environmentally friendly product menus have just started. Accordingly, as the introduction policy on environmentally friendly products, there was found nothing valuable but the regulations. 12 refs., 3 figs., 15 tabs.

  4. Report on projects of the basic survey of effective energy consumption in developing countries and the invitation of engineers of developing countries to Japan (Vietnam, the Philippine, Indonesia and Thailand) in FY 1997; 1997 nendo chosa hokokusho Hatten tojokoku energy shohi koritsuka kiso chosa to jigyo hatten tojokoku gijutsusha shohei jigyo (Vietnam, Philippines, Indonesia Tai)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Based on the significance of technological training for energy saving and environmental protection, NEDO has invited administrators and engineers of four countries in Southeast Asia. Pollution prevention technology, administrative methods and energy saving measures in Japan were lectured in the International Center for Environmental Technology Transfer. The training curriculum included (1) basic law of environment and local administration from the viewpoint of criminal law concerning history of air pollution problems and countermeasures in Yokkaichi petroleum industrial complex, (2) prospect of new energy technology development in Japan relating to the energy saving law, (3) energy saving measures, air/exhaust gas/dust treatment for environmental protection, and actual waste treatment measures by typical individual industries, and (4) significance of common management technology for individual treatment measures. Policies of energy saving and environmental protection and technology information in Japan which can be transferred were provided to two administrators of energy saving in the industry sector of Management of Science, Technology and Environment of Vietnam. 12 figs.

  5. FY 1998 annual report on the project of basic survey for improving energy consumption efficiency in developing countries / invitation of engineer trainees from developing countries (Indonesia, the Philippines, Vietnam and Myanmar); Hatten tojokoku energy shohi koritsuka kiso chosa nado jigyo / hatten tojokoku gijutsusha shohei jigyo 1998 nendo chosa hokokusho (Indonesia, Philippines, Vietnam, Myanmar)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    NEDO is positively implementing the training programs, in view of importance of training experts on (energy-saving and environmental conservation technologies), by inviting administrators and engineers from developing countries to educate them with Japan's pollution preventive techniques, administration procedures, energy-saving measures, and so on. In FY 1998, NEDO commissioned the International Center for Environment Technology Transfer to train administrators and engineers from Indonesia, the Philippines, Vietnam and Myanmar. This paper describes the proposals, based on the collected answers of the trainees to the questionnaires. The trainees were interested in all themes. About 40% of the trainees considered that the training period was short. Some trainees hoped the training course was held in summer. Difference in industrialization is reflected in difference in recognition and urgency of the environmental problems. Training was conducted by English and Vietnamese, but could be done without translators of Vietnamese. Preparation for the invitation needs a lot of works, and the course should be explained more thoroughly beforehand. It is regrettable that one trainee from Indonesia was late for the course. (NEDO)

  6. FY 2000 report on the basic survey to promote Joint Implementation, etc. Survey for improvement of the district heating plant (No. 48) in the Didi-Digomi section; 2000 nendo kyodo jisshi nado suishin kiso chosa hokokusho. Didi-Digomi chiku chiiki danbo plant (No.48) kaizen chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    An investigational study was conducted on the project for energy conservation and reduction in greenhouse effect gas emission at the existing district heating plant in Tbilisi City, Georgia. In the project, the following are conducted for the district heating plants in the Didi-Digomi section and Saburtalo section: renewal/higher efficiency of boiler equipment, adoption of cogeneration using gas turbine, improvement of hot water pipeline and improvement of equipment at heat users. As a result of the study, one plan for cogeneration of 2 units x 6MW class in each section was good in terms of economical efficiency and expenses vs. effects, and the other plan for cogeneration of 17 units (8 units and 9 units) x 6MW class was good in terms of the generated output and regional needs. The amount of energy conservation to be made by the former plan totaled 22,678 toe/y in both sections. The amount of greenhouse effect gas reduction is 70,170 t-CO2/y. The internal earning rate is 1.707% in the Didi-Digomi section and 2.249% in the Saburtalo section. The project profit is lower than the initial investment cost, and therefore, it is necessary to consider the profit from the CO2 emission right. (NEDO)

  7. Basic investigation on promotion of joint implementation in fiscal 2000. Investigations on modification and improvement project for Potoshani district heating and heat supplying facilities in Romania; 2000 nendo kyodo jisshi nado suishin kiso chosa hokokusho. Romania koku Potoshani chiiki danbo netsukyokyu setsubi no kaishu oyobi kaizen keikaku chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Discussions have been given on the improvement and modification project intended of saving energies and reducing greenhouse gas emission in the Potoshani district heating and heat supplying facilities in Romania. Thirty years have elapsed since the building of the Potoshani district heating and heat supplying facilities, whereas noticeable energy loss has occurred due to aged deterioration, such as thermal efficiency decrease, performance decrease, and hot water leakage due to piping corrosion. The present project is intended to improve the heat production and power generation facility efficiencies, and reduce the heat loss in heat transportation and distribution to less than 5%. The improvements will be implemented by replacing and rehabilitating the existing boilers, replacing the turbine generators, and replacing the transportation and distribution pipelines and heat exchangers. As a result of the discussions, the present project is estimated to result in annual fuel conservation of 35,820 tons of crude oil equivalent, and annual reduction of the greenhouse gas emission of 110,835 t-CO2. The total amount of the initial investment for the project would be 11.369 billion yen, and the payback period would be 12 years. The project will produce profit of 31.358 billion yen in 20 years, thus the project is financially feasible. (NEDO)

  8. Fiscal 1997 survey report on the jointly executed/promoted basic survey project (the jointly executed activity Japan Program). Feasibility survey for CO2 reduction by deregulating heavy traffic at specified crossings in Bangkok, Thailand; 1997 nendo chosa hokokusho (kyodo jisshi suishin kiso chosa jigyo (kyodo jisshi katsudo Japan program)). Taikoku Bangkok no tokutei kosaten ni okeru kotsu jutai kanwa ni yoru CO2 sakugen kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The monetary crisis in Thailand with the baht drop in July 1997 as a beginning rapidly worsened the Thai economy. With it, the number of automobiles sold sharply declined, and automobile manufacturers were also heavily damaged as seen in the temporary discontinued production, etc. Under such economic situation, a discussion was made on execution of the project with the Thai Automotive Industry Association (TAIA), a partner at the Thai side. As a result, agreement was made on the positioning of the project, role sharing, and selection of measures against heavy traffic as follows: Japan Automobile Manufacturers Association (JAMA) conducts a feasibility study, proposal of a construction plan and confirmation of effects, and bears the costs. TAIA bears the execution and cost of construction (Due to the worsened Thai economy, JAMA paid almost all the construction expenses). In the light of the economic situation in Thailand, `improvement of the signal control system` was selected as an execution candidate, which has the highest cost effect among the measures against heavy traffic. In the future, the application, registration and execution are done for joint activities for the project. 49 figs., 59 tabs.

  9. Fiscal 1997 survey report. Subtask 2 (hydrogen utilization worldwide clean energy system technology) (WE-NET) (survey/study for the promotion of international cooperation; survey/study on the standardization for hydrogen energy technology); 1997 nendo seika hokokusho. Suiso riyo kokusai clean energy system gijutsu (WE-NET) subtask 2 kokusai kyoryoku suishin no tame no chosa kento (suiso energy gijutsu hyojunka ni kansuru chosa kento)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In relation to the basic study of the standardization for hydrogen energy technology and ISO/TC197, the results of the fiscal 1997 survey were summarized. From fiscal 1994 through 1996, in the wide-range field related to hydrogen energy technology, the survey of the present situation of the related standards/laws was made and the needs/subjects of standardization to be studied in the future were extracted. At the present stage, however, it is still early to enter into the stage of discussing the standardization. Therefore, in this fiscal year, only in the field of the storage/transportation/handling of liquid hydrogen, standards/laws abroad and in Japan were comparatively investigated for the basic study toward the standardization. Further, concerning ISO/TC197, studies were proceeded with of the liquid hydrogen land vehicle fueling system interface/fuel tanks/transportation containers/hydrogen fuel product specifications/airport hydrogen fueling facilities. Some are at the stage of drafting the international standard. Three drafts for the new standard were added such as gaseous hydrogen/hydrogen blend vehicular fuel systems, gaseous hydrogen fuel tanks, and basic requirements for safety of hydrogen systems. The standardization is indispensable to introducing the developed technology to the commercialization. 9 refs., 5 figs., 13 tabs.

  10. Report on commissioned business for fiscal 1997. Development of new power storage system for cells and development of technology for distributed power storage (research for a zinc/air cell system for automobiles); 1997 nendo itaku gyomu hokokusho. Shingata denchi denryoku chozo system kaihatsu bunsangata denryoku chozo gijutsu kaihatsu (denki jidoshayo aen kuki denchi system chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Concerning the above, it is discussed whether such a system is feasible in Japan. A zinc/air cell system requires some special plants for zinc regeneration, etc. It is necessary to build a zinc refining plant and to install dozens of electrode replacing facilities in an area dozens of kilometers in diameter with the plant at the center. For such a system to be functional, there have to be several tens of thousands of automobile users in a limited area. In Japan, so large a number will not be found anywhere even if the appeal is directed to those in the postal service and electric utilities. There will be no economic success in Japan, different from in Germany. As for the economic comparison between a zinc/air cell system and natural gas system, the two will be equivalent to each other as far as the use of the quick filling stations for the natural gas automobiles remains as it is. When the number in consideration is so large as several tens of thousands, however, the natural gas system will turn out to be economically superior to the zinc/air cell system. 19 figs., 29 tabs.

  11. Research report of FY 1997 on the environmentally acceptable coal utilization system feasibility survey. Clean coal technology model project seminar held in Thailand; 1997 nendo seika hokokusho. Kankyo chowagata sekitan riyo system kanosei chosa (Tai ni okeru clean coal technology model jigyo seminar no kaisai)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-02-01

    To reduce SOx with coal utilization, the desulfurization seminar diffusing the demonstration project of simplified desulfurizer introduction was held at the site in Thailand. The purpose is to reduce the environmental pollutants and contribute to the effective utilization of energy with coal utilization in Thailand. Invitation letters were sent to users of coal and heavy oil boilers through the Department of Factories, Ministry of Industry, Thailand, to call participation in the seminar. Inspection of the desulfurizer introduced in the factory of Thai Union Paper Public was included in the seminar for diffusing the project. The inspection site is in the demonstration project site of simplified desulfurizer introduction. There were a lot of participants from Thai users and from Japan. The seminar included the presentations from NEDO, JETRO, FTI, and MOSTE, introduction of general technology for processes of ENAA desulfurizer, introduction of demonstration unit plan by IHI, and introduction of operation of demonstration unit by TUP. 31 figs., 6 tabs.

  12. Fiscal 1997 report on the survey of verification of geothermal exploration technology, etc. 1. Development of the reservoir variation exploration method (development of the fracture hydraulic exploration method); 1997 nendo chinetsu tansa gijutsu nado kensho chosa. Choryuso hendo tansaho kaihatsu (danretsu suiri tansaho kaihatsu) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper described the fiscal 1997 result of the fracture hydraulic exploration method as the variation exploration method of geothermal reservoirs. By elucidating hydraulic characteristics of the fracture system forming reservoir, technologies are established which are effective for the reservoir evaluation in early stages of development, maintenance of stable power after operational start-up, and extraction of peripheral reservoirs. As for the pressure transient test method, a test supporting system was basically designed to obtain high accuracy hydraulic parameters. As to the tiltmeter fracture monitoring method, a simulation was made for distribution of active fractures and evaluation of hydraulic constants without drilling wells. In relation to the two-phase flow measuring method, for stable steam production, the use of the orifice plate, the existing flow measuring method, etc. was forecast as a simple measuring method of the two-phase state of reservoir. Concerning the hydrophone VSP method, a feasibility study was made of the practical VSP for high temperature which can analyze hydraulic characteristics and geological structures around the well at the same time which the existing methods were unable to grasp, and brought the results. Moreover, to make high accuracy reservoir modeling possible, Doppler borehole televiewer was made in each reservoir. 80 refs., 147 figs., 22 tabs.

  13. Project for the basic survey of enhancing energy consumption efficiency in developing countries. Summary of the Conference on the Policies and Measures of Climate Change Mitigation; Hatten tojokoku energy shohi koritsuka kiso chosa nado jigyo. Kiko hendo kanwasaku no seisaku to sochi ni kansuru kokusai kaigi hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The Conference on the Policies and Measures of Climate Change Mitigation was held in Tokyo on January 28, 1997, with participation in the conference from governments, research institutes, industrial circles, NGO, etc. of ten countries including Japan. In the session `technology transfer,` presentations were made on `the current status of the technology transfer, and the expectation and requests` by Australia and Japan which provide technology and by China which receives technology. As a whole, every country recognized importance of technology transfer of both hardware and software, private sectors` taking leadership, the use of international organizations dealing with fund supply and credit guarantee. In the session `tradable permits/quotas,` Dr. A. Haspel, U.S. Department of Energy reported the structure and effect of U.S. tradable emission permits on sulfur dioxide from thermal power plants, and proposed tradable emission permits against greenhouse effect gas. The proposal needs to be further studied and discussed, and it was regarded as too early to include the proposal in the protocol to be conducted at COP3

  14. FY 2000 report on the R and D of the particulate utilization type creation technology of biological connective substances. Survey of the technical trend overseas; 2000 nendo biryushi riyogata seitai ketsugo busshitsu nado sosei gijutsu no kenkyu kaihatsu seika hokokusho. Kaigai gijutsu doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The paper summarized the reports on the results of Japanese engineers' participating in the related scientific meetings held overseas as a survey report on the trend of the overseas technology. The scientific meetings they participated in were: 1) Impact of Genomics on Medicine and Pharmacogenomics Europe (Amsterdam; May 15-26, 2000), 2) Drug Discovery Technology 2000 (Boston; August 10-20, 2000), 3) Biotechnology 2000 (Berlin; September 3-12, 2000), 4) PacificChem 2000 (Hawaii; December 14-21, 2000), 5) 4th Winter Conference on Medicinal and Bioorganic Chemistry (Seattle; January 27 - February 4, 2001). Impact of Genomics on Medicine was composed of the following five fields: microarrays, proteomics, functional genomics and target validation, genetic variation technology, and applications of SNP analysis (joint session). Pharmacogenomics Europe was composed of the following four fields: applications of SNP analysis (joint session), SNP assays, targets and compounds, and clinical applications. (NEDO)

  15. Model operation to improve energy consumption efficiency in developing countries. Demonstration study (investigation project) on material preheating equipment for an electric furnace (using reduced iron as a raw material); Hatten tojokoku energy shohi koritsuka model jigyo. Denkiro no genryo yonetsu sochi (kangen tetsu genryo) ni kakawaru jissho kenkyu (chosa jigyo) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Investigations were given on a device technology that can obtain energy saving and environment preserving effects in electric furnace iron making using reduced iron as a raw material. The effects can be obtained by continuously charging into an electric furnace the reduced iron supplied from an iron ore reducing plant while the iron is kept hot. The investigations were carried by sending survey groups to India and Mexico who are producing reduced iron, and Egypt and Malaysia who possess iron reducing technologies, and by analyzing the actual conditions of reduced iron manufacturing equipment and electric furnace facilities. In addition, retrieval, collection and analysis were performed on technical data and information on reduced iron available inside and outside the country. As a result, a proposal was made to select India as a site to execute the demonstration study on the hot reduced iron insertion technology. The reasons for the selection are: India has a large number of steel mills that have iron reducing facilities and electric furnaces; the country is geographically convenient for Japanese research institutes to implement the demonstration study; the country`s DRI production is the largest in the south-eastern Asia; and electric power cost is high. 92 refs., 49 figs., 30 tabs.

  16. Survey report for fiscal 1997 on the survey report on the actual state of technical cooperation on industrial technologies by European countries in the South-eastern Asian region; 1997 nendo Tonan Asia chiiki ni okeru Obei shokoku no sangyo gijutsu ni kansuru gijutsu kyoryoku jittai chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The actual state was surveyed on the technical cooperation by European countries in the South-eastern Asian region. The U.S.A. is making research cooperation with Thailand on ethylene molecule structures to enhance productivity in rubber production, France on molecule markers for high production rubber clone selection, and Australia on grain storing and drying methods. For the Philippines, America is giving assistance on management of reproducible resources, France on climate information communications systems for local areas, Australia on grain storing and drying methods, and Germany on waste oil recovery and reutilization, and development of pollution-free energy resources. For Malaysia, the Great Britain is cooperating on building engineering research centers, Australia on search for plant patheology genetic organics available in the Pacific region, and Germany on investigative researches on pollution prevention for tin mines and processing areas, and forestry and plant information systems. With respect to the ASEAN, this paper reports its activities placing importance on biology and electronics engineering, while the organization is taking actions in the areas of foodstuffs, animals, electronics, information and material science, energy exploration, marine and earth physics, and resource development. (NEDO)

  17. FY 2000 report on the basic survey to promote Joint Implementation, etc. Energy conservation by modernization of a cement plant (Double Horse Cement Co.) in China; 2000 nendo kyodo jisshi nado suishin kiso chosa hokokusho. Chugoku cement kojo (Double Horse Cement) kindaika ni yoru sho energy

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    An investigational study was conducted of possibilities of energy conservation and greenhouse effect gas emission reduction in the cement production process of Double Horse Cement Co., Mianyang City, Sichuan Province, China. Double Horse Cement adopts the wet type long kiln production system and has a production ability of approximately 1.5 million t/y. In the project, as to three production lines out of the six production lines, improvement was planned to be made of the technologies on the following: mixing of raw materials, grinding of raw materials, NSP, clinker cooler, clinker pre-grinder, high-efficiency separator, waste heat use power generation, etc. As a result of the study, it was found that the energy conservation amount obtained was 54,646 toe/y. And, the amount of greenhouse effect gas reduction was 169,086 t-CO2/y. The total fund required for this project was approximately 5.553 billion yen and the internal earning rate was 7.36% after tax. When the project is carried out, expenses vs. effects are 9.8 toe/million yen in energy conservation amount and 30.4 t-CO2/million yen in greenhouse effect gas reduction. (NEDO)

  18. Survey report for fiscal 1998 on research and development and its staff training. Towards cooperation among Japan, Australia and developing nations in Asia; Kenkyu kaihatsu to sono jinzai ikusei 1998 nendo chosa hokokusho. Nippon, Australia oyobi Asia no hatten tojokoku no kyodo wo mezashite

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This paper makes an analysis on the characteristics of R and D concerning Australia, one of the core nations in the cooperation, on the basis of the idea that 'establishment of new comparative superiority through cooperation' can be realized by joint work among Japan, Australia and Asian nations. In Australia, it was found that R and D was often promoted through a new idea obtained by recruiting heterogeneous persons and communicating mutually internally. It was also found that in Australia an affinity exists to such persons of different nature. Accordingly, Australia was presumably quite suitable for the place to bring up the persons of developing nations. On the basis of these analytical results, proposal was made to promote three programs; namely, preparation of a data base for R and D organizations and the staff, commencement of a partnership program, and opening of a needs searching conference. (NEDO)

  19. Fiscal 1997 survey report. Subtask 9 (hydrogen utilization worldwide clean energy system technology) (WE-NET) (survey/study on the innovative and leading technology); 1997 nendo seika hokokusho. Suiso riyo kokusai clean energy system gijutsu (WE-NET) subtask 9 kakushinteki, sendoteki gijutsu ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For the purpose of giving useful suggestions/proposals to the course of WE-NET and contributing to the R and D, conducted were survey/collection/evaluation of new technologies. The paper described the fiscal 1997 results. The number of the proposals of new technology accumulated during fiscal 1993 to 1997 is 28. The proposals of new technology made in fiscal 1997 are hydrogen production effectively using solar energy by wavelength zone, hydrogen storage using fullerene, and the methanol power generation turbine system. Four technologies proposed in fiscal 1996 and 1997 were evaluated. The evaluation method requires two steps of the marking using the analytic hierarchy process (AHP) and the adjustment by the committee. The highly evaluated proposals out of those having been made were analysis/evaluation of hydrogen-oxygen internal-combustion Stirling engine, hydrogen production effectively using solar energy by wavelength zone, hydrogen production by solid oxide electrolysis, magnetic refrigeration method for hydrogen liquefaction, hydrogen production technology using photocatalyst, etc. The paper also stated the result of studying concepts of innovative/leading technologies in fiscal 1996. 4 figs., 29 tabs.

  20. FY 1997 report on the study on cryogenic aggregate target PLD process by multi-laser excitation for using gaseous materials; 1997 nendo chosa hokokusho (kitai genryo riyo no tame no taju laser reiki ni yoru gokuteion gyoshutai target PLD process ni kansuru kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper reports the result in fiscal 1995 of the study on PLD (pulse laser deposition) thin film formation process having been made since 1993. In fiscal 1995, the effect of irradiation of excimer laser and YGA(SHG) on ablation of aggregates of N2, CH4, Ar, Kr and Xe, and the effect of time-delayed irradiation of YGA(SHG) and KrF excimer laser on ablation of N2 aggregate were studied aiming at exciting ablation by cryogenic aggregate alone. Experimental results by a newly developed multi-laser excitation experiment equipment are as follows. Ablation was not caused by KrF excimer laser irradiation, while caused by YGA(SHG) irradiation. Ablation was caused by 1mm thick N2 or CH4 aggregate alone. Kr target was the most promising among rare gas solid targets expected as seed of ablation occurrence. Multi-irradiation showed a different ablation behavior as compared with single YGA(SHG) irradiation, and in some cases, multi-irradiation not increased scattering of particles. Time-delayed multi- irradiation (YGA(SHG) excitation after excimer excitation) was effective. 23 figs., 4 tabs.

  1. Fiscal 1997 report on the verification survey of geothermal exploration technology. 5-1. Development of the reservoir variation survey method (technology of prediction of reservoir variation); 1997 nendo chinetsu tansa gijutsu nado kensho chosa. Choryuso hendo tansaho kaihatsu (choryuso hendo yosoku gijutsu) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For the reservoir evaluation at an initial developmental stage and stabilization/maintenance of power after the start of operation, the fiscal 1997 result was described of the study of technology of prediction of reservoir variation. Using the conventional post processor, feasibilities were computed of reservoir models and behavior after the development, and gravity/self potential/resistivity variation. Variation in the seismic wave speed structure was large in travel time change distribution. The measuring accuracy of 1m sec is required to get enough detection resolving power. A conceptual design of the post processor development was conducted to study a system operated on Windows. Based on the reservoir numerical simulation technology, by taking in variation parameters such as gravity and self potentials as new model constraint conditions, the reservoir modeling technology which increased in accuracy by history matching was trially developed. Using the conventional reservoir model in the Oguni area, predictably computed were reservoir behaviors during 50 years which simulated a 20 MW development. Effectiveness of the post processor were able to be shown though influenced by characteristics such as permeability and resistivity. 74 refs., 95 refs., 12 tabs.

  2. Fiscal 1993 technological survey report. R and D project for industrial science and technology (Assignment by NEDO/R and D of biochip - survey on biological research of biochip); 1993 nendo bio soshi no kenkyu kaihatsu seika hokokusho. Bio soshi seibutsu kenkyu chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-04-01

    As a part of the R and D of a biochip, for the purpose of establishing fundamental technology in connection with a biochip having a new function that is nonexistent in a semiconductor, a committee for biological research and survey of biochip was organized, operating research activities, surveying and compiling research situations and technological trend at the forefront of each field, in regard to information processing in the biological field, brain-memory related information processing in the medical field, and biologically simulated information processing in the engineering field. The results were summarized in the following seven areas. 1. neurology of memory, 2. the frontal lobe and recognition, 3. function of the olfactory lobe and neural connection between the olfactory lobe and the hippocampus, 4. the cerebral fundus nucleus and function, 5. coordinate change from vision to motion in the brain, and 6. control of transient potassium current by the astroglia cell in the mouth and the hippocampus cultured nerve cell. (NEDO)

  3. Achievement report for fiscal 1998 on the preceding research related to global environment industry technologies. Survey and research on reduction of nitrogen monoxide; 1998 nendo chikyu sangyo gijutsu ni kakawaru sendo kenkyu asanka chisso no haishutsu teigen ni kansuru chosa kenkyu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Nitrogen monoxide is a strong greenhouse effect gas having warming up index per molecule 300 times greater than that of CO2, and is designated as the object of reduction in the Kyoto Conference. The present preceding research discusses necessity of performing research and development works related to reducing the emission of nitrogen monoxide, and if it is necessary, places the final objective on proposition of what researches should be planned. Fiscal 1997 being the first fiscal year of the preceding research has surveyed emission amount from different emission sources, and enumerated the research and development assignments. Fiscal 1998 falling under the final fiscal year summarizes the emission amount including the future trends, surveys the feasibility of the promising technological measures through experiments, and proposed finally a research and development plan desired of implementation in the future. The proposal contains a research plan placing development of nitrogen monoxide decomposing catalysts and automobile catalysts as the main objectives. Among the domestic nitrogen monoxide generating sources, about 2/3 is the man-made generation sources, hence catalysts, if developed, may be applied to such facilities as combustion furnaces. (NEDO)

  4. Project to support promotion of forming an environmentally friendly energy community. Survey report on 'a survey on introduction of industrial wastes composite treatment and power generation system intended for the whole Kagoshima prefectural area'; Kankyo chowagata energy community keisei sokushin hojo jigyo. Kagoshimaken zenken'ikika wo taisho to shita haikibutsu fukugo shori hatsuden system no donyu chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    In order to reduce environmental load, such as suppression of dioxin generation in Kagoshima Prefecture having a large number of small cities, towns and villages, discussions were given on business feasibility of introducing a high-efficiency industrial wastes power generation system intended for the whole Kagoshima prefectural area. The discussions performed investigations on quantity of wastes generation by districts and kinds and the present treatment conditions, system designs, and optimization of business operation systems. Loads given to the environment in association with the system installation were also investigated (SOx, NOx and CO2 emission, and water quality contamination). The system incinerates and treats RDF, waste plastics and combustible wastes in a gasification melting furnace, and amount of dioxin in the waste gas and ash is reduced to below the regulation values. Quantity of heat obtained from the combustion is turned into high-temperature and high-pressure steam, which is utilized for power generation. As a result of the discussions on business profitability, the industrial wastes power generation system intended for the whole prefectural area was found sufficiently realizable if installed by the public organization and operated by private business organization. However, such mechanism as PFI is thought difficult in the range anticipated at the present time. (NEDO)

  5. Survey report on a regional new energy vision establishment in Ueki Township. Town of solar energy and energy conservation (vision to build the town by actively living and creating with environment); Uekimachi chiiki shin energy vision sakutei chosa hokokusho. Taiyo energy to sho energy no machi (kankyo to sekkyokuteki ni kyosei kyososuru machizukuri vision)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Discussions were given on the new energy vision at Ueki Township in Kumamoto Prefecture. The total energy demand in Ueki Township is 898 x 10{sup 7} Kcal. of which about 44% is accounted for by the transportation department, 34.7% by the industrial department, and 21% by the consumer department. The total available regional new energy amount is estimated to be 52.1 x 10{sup 6} kWh/year, which is consisted of stockbreeding wastes energy at 44.1%, solar energy power generation at 33.2% and solar heat utilization at 22.6%. Introduction of wind energy was judged impracticable. The new energy introduction plan calls for introduction of solar energy power generation for lighting and air conditioning of the diamond shaped nursery school, the Yamamoto nursery school, the Ueki Township office building, the multi-purpose sports center, the Ueki Hospital operated by the national health insurance, the multi-purpose health and welfare center, Yoshimatsu Sports Park, and Tahara Sports Park. A subsidy institution by the local government was discussed as the proliferation plan of solar energy power generation systems to be installed in individuals' houses and enterprises, with which introduction to residential houses of about 30% was targeted by 2010. (NEDO)

  6. Fiscal 1997 report on the verification research on geothermal prospecting technology. Theme 3. Development of a reservoir variation prospecting method (development of electric/electromagnetic prospecting methods); 1997 nendo chinetsu tansa gijutsu nado kensho chosa. 3. Choryuso hendo tansaho kaihatsu (denki denjiki tansaho kaihatsu) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    To evaluate geothermal reservoirs in the initial stage of development and keep stable output in service operation, measurement of self-potential and resistivity changes due to production and reinjection of geothermal fluid has been made. This paper describes the result in fiscal 1997. To study the placing method and stability of electrodes for continuous self-potential monitoring network in fiscal 1998, continuous monitoring of potential differences started in an experimental field. The placing condition and electrode will be selected by July. By surveying self-potentials after the beginning of operation of Oogiri geothermal power plant, a distribution range of negative and positive potential anomalies was clarified. To predict the resistivity change, long-term change in salinity concentration in a reservoir was estimated by a hydrothermal flow concept model. The resistivity change caused by reservoir variation due to plant operation was also predicted to study its detection by MT method on the ground. The salinity concentration change due to reinjection, and resistivity change due to a two-phase region in the top of a reservoir were considered. 17 refs., 56 figs., 19 tabs.

  7. Report on survey in fiscal 2000 on the survey on succession of history of industrial technologies. Survey edition of industrial technologies in Japan that have contributed largely to development of industries; 2000 nendo sangyo gijutsu rekishi keisho chosa hokokusho. Sangyo no hatten ni okiku kiyoshita kokunai sangyo gijutsu no chosahen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Surveys and researches have been performed to serve as reference for the future research and development policies by clarifying the innovation process of industrial technologies in Japan and the originality and creativity seen in that process. The surveys have focused on processes born in Japan and evaluated as 'world class' in significance of some kind, and summarized the technology history. The current fiscal year has surveyed newly the following nine processes: industrialization of the sodium glutamate and fructose manufacturing technologies, development of solar cell technologies, industrialization of the manufacturing process of cyclohexnol via cyclohexene, development of the MEK manufacturing process, development and industrialization of hollow fiber reverse osmosis membrane modules for single stage sea water desalination, development and industrialization of the new vitamin B1 intermediate process, development of HSG-Si capacitors for semiconductor memories, and development and industrialization of 4-ethylene fluoride/ethylene copolymer (ETFE). The surveys are considered to have obtained the results abound in suggestions toward original and creative technological developments. (NEDO)

  8. Fiscal 1997 report on the verification research on geothermal prospecting technology. Theme 4. Development of a reservoir variation prospecting method (development of a micro-earthquake monitoring system (MEMS)); 1997 nendo chinetsu tansa gijutsu nado kensho chosa. 4. Choryuso hendo tansaho kaihatsu (jishinha tansaho kaihatsu) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    To evaluate geothermal reservoirs in the initial stage of development and keep stable output in service operation, the application of MEMS is under development. This paper describes the result in fiscal 1997. Installation of 3-component velocity type seismometers in bore holes is desirable for permanent monitoring sites. Their arrangement should be determined by detection ability simulation. Their locations at various elevations are effective to improve the accuracy of hypocenter determination. Digital seismic data at the permanent sites are transmitted to a center through cables, while temporary data are recorded on site. For poor MEPAS, a Windows program of basic functions was developed. 3-D seismic velocity analysis and array monitoring system were also studied. A P-wave velocity of rocks decreased by 25% by formed two-phase region, and increased by 10% by decrease in reservoir temperature from 200 to 100degC. The velocity can be detected by change in travel time of direct waves due to considerable variation in reservoir environment. VSP technique using a vibrator or air gun as artificial hypocenter is effective for MEMS. 67 refs., 64 figs., 19 tabs.

  9. Fiscal 1999 report on basic research for promotion of joint implementation programs. Research on introduction of dual mode bus system for greenhouse gas reduction; 1999 nendo onshitsu koka gas sakugen no tame no dual mode bus system donyu ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    A feasibility study is conducted of the above-named system in Malaysia, to be linked to COP3 (Third Session of the Conference of the Parties to the United Nations Framework Convention on Climate Change) clean development mechanism (CDM). The dual mode bus system (DMBS) is a combination of advantages of the rail running stock such as monorails and the road running stock in that the buses when running on dedicated roads are automatedly formed into a linear formation and travel at a specified economical speed. When running on ordinary roads, the formation is broken into individual buses, and they spread in the town where they travel in a planar pattern. The economical speed and reduction in air drag thanks to the linear formation saves fuel and reduces CO2 emissions. The complementary relationship to be formed with the existing public transportation systems will also function positively. Studies are conducted on condition that two routes be laid in the Kuala Lumpur urban area and one in the new city Putra Jaya. All the three routes exhibit a high economic internal rate of return, but their financial internal rate of return indicates that probabilities are low that they will pay as private businesses. They will need financial supports such as subsidies. Contribution to CO2 reduction may be slight when attention is paid only to the partial changeover from the existing bus system to DMBS but larger contribution will be found in crossover from private cars to DMBS which is higher in quality of service. (NEDO)

  10. Fiscal 1999 report on basic research for promotion of joint implementation programs. Feasibility study on energy saving and environmental improvement for Radom City district cogeneration station; 1999 nendo Radom shi chiiki netsuden heikyu station sho energy oyobi kankyo kaizen kanosei chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Pursuant to the COP3 (Third Session of the Conference of the Parties to the United Nations Framework Convention on Climate Change) protocol, studies are conducted on a district cogeneration station for Radom City, Poland. Using the annual load pattern of heat supply, cogeneration will be built only for the amount that covers utilization factors not lower than a specified level, and the shortage in winter when the load is heavy due to demand for heat will be dealt with by the existing hot water boilers. Daily change in load is to be covered by a new, additional boiler which will bear 20% of the whole output. The system is a natural gas fired turbine cogenerator, and hot water is supplied by a waste heat recovery boiler. Cogeneration will cover 80% of the annual heat supply. As for heat supply capability, it is set at 72MWt with the additional boiler taken into account, and 35MWe is to be generated. Heat efficiency will increase to be higher than 80%, coal consumption will decrease, and 28,117 tons/year in terms of oil will be saved with the increase in natural gas consumption subtracted. CO2 reduction will also be as large as 206,000 tons/year, decreasing air pollutants. Provided that 4.336-billion yen for facilities are financed by Japan's environmental yen loan, Poland's National Fund, and Radom City's own fund, IRR (internal rate of return) on investment will be fairly good at 10% in 30 years of operation. Investment will be recovered in nine years and there is no problem in cash flow. (NEDO)

  11. FY 2000 report on the basic survey to promote Joint Implementation, etc. Environmental improvement and energy conservation measures in Pakistan Steel, a state-run enterprise in Pakistan; 2000 nendo kyodo jisshi nado suishin kiso chosa hokokusho. Pakistan koku kokuei Pakistan Steel ni okeru kankyo kaizen sho energy taisaku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the state-run plant of Pakistan Steel in Pakistan, an investigational study was conducted on energy conservation and reduction in greenhouse effect gas emission. In the project, energy conservation technology on the following was tried to be introduced: coke oven coal moisture control (CMC) equipment, sintering cooler waste heat recovery equipment, blast furnace hot stove waste heat recovery equipment, blast furnace pulverized coal injection (PCI) equipment, blast furnace top pressure recovery turbine (TRT) equipment, and hot strip mill heating furnace regenerative type burner equipment. Further, in the project on environmental improvement, studies were made on coke oven environmental improvement and blast furnace cast house dust collection. The results of the study indicated that economical effects of the energy conservation project were considered as low because the unit price of energy of Pakistan Steel is low. However, substitution of the low-priced domestic coal for the imported coal has a good effect, and energy conservation in the TRT power generation and by the regenerative type burner produces a highly economical effect. Therefore, Pakistan Steel also agrees to positively promote the project. Moreover, concerning the environmental improvement project, it was considered that the necessity of the project is high in the relation of the coke oven aimed at reducing emissions of toxic substances. (NEDO)

  12. Basic investigation on promotion of joint implementation in fiscal 2000. Efficiency improvement project for district heat supplying plants in Dailian City in China; 2000 nendo kyodo jisshi nado suishin kiso chosa hokokusho. Chugoku/Dailian shi chiiki netsu kyokyu plant kokoritsu kaizen project

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Investigations and discussions have been given on energy saving possibilities at two medium-sized heat and power supplying plants in the city of Dailian in China. The project will improve the operation methods of the heat and power plants so that the energy cost can be minimized, and attempt to improve the boiler heat efficiency and save the energy by means of heat recovery and utilization. The draft modification plan for energy conservation has planned operation optimization for energy conservation, control of boiler operation under variable pressure, modification of the external boiler heat converter, use of inverters for the large capacity motors for boilers, and recovery of heat from the boiler blow-down water. In the analysis, models were structured from the operation data, and the effects of applying the energy saving measures were derived from simulation. As a result, the energy saving effect was found to be about 13,000 tons at the Chunhai plant and about 7,000 tons at the Pulandian plant annually (converted to oil). The reduction in greenhouse gas emission was found to be about 40,000 tons at the Chunhai plant and about 20,000 tons at the Pulandian plant annually. The number of years for investment payback is about 4.1 years at the Chunhai plant, and about 4.9 years at the Pulandian plant, wherein good profitability can be estimated. (NEDO)

  13. FY 2000 report on the basic survey to promote Joint Implementation, etc. Project for improvement of efficiency of the power generation/desalination plant in Aktau City; 2000 nendo kyodo jisshi nado suishin kiso chosa hokokusho. Aktau shi hatsuden zosui plant koritsu kaizen jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of conserving energy and reducing greenhouse effect gas emission, feasibility study was conducted for improvement of efficiency of power generation/desalination facilities at MAEK Energy Center, Aktau City, Manghistau, Kazakhstan. Presently, the main facilities are the conventional natural gas fired power plant, evaporation type seawater desalination facility, hot water production facility, etc. In the project, introduction of the following was planned to be made: cogeneration facility composed of two units of 1,100-degree C class gas turbine and reverse osmosis (RO) type desalination facility for drinking water production with a capacity of 50,000 t/d. As a result of the study, the energy conservation amount in this project was 151,900-165,400 toe/y in power generation facility, and the greenhouse effect gas reduction amount was 355,000-387,000 t-CO2/y in power generation facility and 268,000 t-CO2/y in desalination facility. The construction cost and operational cost of the plant were 45.7 billion yen and 2.8 billion yen/y. In the economical estimation, ROI and ROE before tax were 7.4 and 34.8, respectively, which were considered to be appropriate values as social infrastructure related conditions. (NEDO)

  14. Fiscal 1999 research and development of technologies for practical application of photovoltaic power generation systems. Research and development of photovoltaic power utilizing system and peripheral technologies (Research and development for enhancing reliability of photovoltaic power generation - Research on long-term reliability of inverter); 1999 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Taiyoko hatsuden riyo system shuhen gijutsu no kenkyu kaihatsu (taiyoko hatsuden no shinraisei kojo ni kansuru kenkyu kaihatsu - inverter no choki shinraisei no chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    In fiscal 1999, the power conditioner which is the primary component of a photovoltaic power system was subjected to an accelerated test, etc., for the evaluation of its durability. For the accelerated test, operating conditions were so set that acceleration be implemented according to Arrhenius' law at ambient temperature 40 degrees C and relative humidity 36%. For the operation of the power conditioner, it was so set that the operation duration be 3.5 hours with a rest time of 4.5 hours for the night or the like. In the accelerated test conducted as in the previous year, 1100 cycles were completed recording the maximum, equivalent to approximately 8-1/2 years according to Arrhenius' law. After the test, no life affecting changes were detected in specimen device A, B, or D. Specimen C, however, failed during the test. As for the evaluation of durability of components, the electrolytic capacitor in the power conditioner was named. Reliability related literature was investigated and a durability evaluation test was started, with consideration given to the voltage to apply and service temperature. (NEDO)

  15. FY 1998 annual report on the development of laser-aided, noncontacting, realtime, in-process dressing method using a grinding stone with ultrafine abrasive grains, and study on techniques for applying the method to grinding stone of superthin blades; 1998 nendo laser wo mochiita choteiryu toishi no hisesshoku real time inprocess dressing ho no kaihatsu oyobi gokuusuha toishi eno tekiyo gijutsu ni kansuru kenkyu chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A new noncontacting dressing method using a laser as a tool has been studied and developed, in order to develop environment-compatible, energy-saving type machining machines. In this study, a cup-shaped grinding stone is developed for grinding performance testing by micron-order diamond abrasive powder, used for producing a grinding stone of superthin blades, is mixed with a cast iron binder, molded and sintered. In the grinding performance test, zirconia as a work is ground at a constant pressure to the grinding stone working surface before and after the laser-aided dressing, to analyze grinding/removal efficiency and grinding resistance. The grinding stone working surface conditions are observed by a scanning electron microscope after the laser-aided dressing, to correlate the surface conditions with the grinding data. It is found that the laser-aided dressing method needs no lubricant, is clean, cutting grinding time when incorporated in the machining process, suitable for grinding stone of low stiffness and ultrathin blades by use of ultrafine abrasive grains, suffering no exfoliation of the diamond grains, and hence economical. (NEDO)

  16. Fiscal 1998 survey report. Medical equipment (Development of fine sampling/analysis system for blood / Development of high-precision 3-D image diagnosis system / Development of low-invasion operation support system / Total development of artificial internal organ technologies); 1998 nendo chosa hokokusho. Iryo kiki (ketsuekinado biryo saishu, biryo bunseki system kaihatsu/koseido sanjigen eizo shindan system kaihatsu/teishinshu shujutsu shien system kaihatsu/jinko zoki gijutsu sogo kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For efficient medical care supply systems, the R and D of advanced medical care technology and equipment largely contribute to productivity improvement for medical care services. Among them, a progress of medical care technology is becoming important for preparation of efficient and fair supply systems. MITI thus established 'Medical care and welfare equipment development project' in 1994, and has promoted the strategic long-term R and D project of medical care and welfare equipment as joint R and D project of NEDO and private enterprises. In fiscal 1998, on the development of the fine sampling/analysis system for blood, the high- precision 3-D image diagnosis system, the low-invasion operation support system, and the artificial internal organ technologies since fiscal 1996, this project clarified essential technical issues based on the future view, selected some themes to be newly developed in the future, and surveyed and evaluated the details of their R and D concretely. (NEDO)

  17. Fiscal 1999 research report. Basic research for promotion of joint implementation programs (Comprehensive feasibility study on efficiency improvement of heat generation facility and heat network for district heating at middle and small cities in Moscow region, the Russian Federation - 2 model cities within the region); 1999 nendo Russia renpo Moscow shunai chusho toshi ni okeru chiiki danboyo netsu kyokyu shisetsu yusomo no koritsu kaizen keikaku sogo chosa hokokusho. Shunai 2 toshi wo model to suru

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The above-named effort aims to work out modification plans and to predict their energy saving, energy substituting, and greenhouse gas reduction effects, and thereby to scout out a project which will effectively utilize flexibility-ensuring 'joint implementation' for the attainment of greenhouse gas reduction levels defined at COP3 (Third Session of the Conference of the Parties to the United Nations Framework Convention on Climate Change). The results of assessment of this project based on the outcome of the survey show that (1) there is necessity for the project and that the presence of needs to be urgently satisfied is clear, that (2) energy saving, energy substituting, and greenhouse gas reduction effects are proved to exist and that the project is therefore an appropriate candidate for an activity to be implemented jointly, that (3) Russian agencies concerned are strongly interested in the project and that a sufficiently cooperative system will be available toward implementation, and that (4) there is an extremely large room for energy saving in the district heating oriented heat supply business in Russia and that probabilities are quite high that natural gas-fired turbine cogeneration plants capable of improving overall energy efficiency will enjoy extensive diffusion. (NEDO)

  18. Medical and welfare device session. Toward medical treatment and welfare of tomorrow; Iryo fukushi kiki session. Ashita no iryo fukushi ni mukete

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-09-01

    This paper is the material distributed in the medical and welfare device session held under the auspices of NEDO in September 2000. Diversification of needs in the medical and welfare areas and handling of age advancement are the growing issue. NEDO is putting efforts toward enhancement of quality of life (QOL) and realization of the nation with great life by providing high-quality and high-efficiency medical and welfare services. The NEDO's efforts cover the areas of treating adult diseases such as cancers and cardiac diseases whose seriousness is growing, early diagnoses of diseases, medical treatment with low invasion, elderly people helping, reduction of helpers' burden, reduction of handicaps to elderly people and mentally and physically handicapped persons, and assistance to participation in the society. To achieve these goals, NEDO is implementing the following four projects: research and development of medical and welfare device technologies, researches of medical science and engineering collaboration type, and promotion of developing welfare techno-systems and practical application of welfare appliances. Developments are being made toward practical application of medical and welfare devices with excellent safety and convenience, of low cost and high performance. The session gave the keynote addresses related to medical treatment and prevention of brain diseases; brain, the universe and MRI (the world of mind as seen in images), and high-tech medical treatments to protect brain (challenge to brain that starts now). (NEDO)

  19. FY 2000 report on the results of the development of commercialization technology of the photovoltaic power system. Summary. R and D of the photovoltaic power generation utilization system/periphery technology (R and D on the improvement of reliability of photovoltaic power generation - Investigative study of the electric safety of the photovoltaic power system); 2000 nendo New sunshine keikaku seika hokokusho. - Taiyoko hatsuden system jitsuyoka gijutsu kaihatsu - Taiyoko hatsuden riyo system shuhen gijutsu no kenkyu kaihatsu (Taiyoko hatsuden no shinraisei kojo ni kansuru kenkyu kaihatsu - Taiyoko hatsuden system no denkiteki anzensei no chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the prevention of the secondary disaster associated with the leakage of electricity and spark generation in the photovoltaic power system at the time of being struck by disaster such as lightning, the investigative study was conducted, and the FY 2000 results were reported. In the study of technology of lightning damage prevention, the following were carried out: test on electrical insulation characteristics of modules, test on lightning impulse current of modules, various simulation tests on lightning surge voltage, etc. As to measures for prevention of lightning damage of the photovoltaic power system, two cases of simulation tests were conducted: case in which the lightning over voltage was controlled by installing arrester in array or junction box; case in which the over voltage was controlled by connecting the line of D class ground of PV system and the line of B class ground of pole transformer. In both cases, the effect of reduction in lightning over voltage was confirmed. In the investigative study of the life of PV module, the following were studied: deterioration due to the glass damage of PV module, influence of hot spot phenomena in case small particles such as rubbish were put on the surface of the PV module integrated with construction material, influence of hot zone phenomena at PV module connection spots. (NEDO)

  20. FY 2000 report on the research cooperation project 'research cooperation diagnosis survey.' Research cooperation in technology to improve the environmental response type industrial use water circulation utilization (Thailand) Nos. 1 and 2. and research cooperation in technology to recover the harmless metal in smoke/ash in smelting works (Chile); 2000 nendo kenkyu kyoryoku jigyo 'kenkyu kyoryoku shindan chosa' hokokusho. Kankyo taiogata kogyoyosui junkan riyo kojo gijutsu ni kansuru kenkyu kyoryoku (Tai) 1 kaime 2 kaime, seirenjo enbai no mugaika kinzoku kaishu gijutsu ni kansuru kenkyu kyoryoku (Chiri)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    In Chile, for the purpose of coping with problems on the ground subsidence and water shortage caused by pumping up the industrial use ground water, survey was conducted of the research cooperation in reutilization of the industrial waste water retreated for the food industry and the fiber industry. As a result, as a MOU plan, the establishment of the regenerative utilization technology was proposed of the treated water after the activated sludge treatment in food plants and after the Lagoon treatment in the fiber/dyeing industry. In Chile, relating to the harmless metal recovery technology to recover valuable metals such as copper, lead, zinc and silver included in the smoke/ash containing arsenic in copper smelting works at low cost by reducing environmental loads, conducted were survey for research cooperation and discussion on the making of a draft of the basic agreement. The project includes the high grade leaching separation, simplification/non-slagging of the lead/silver residue melting process, optimization of the copper separation/recovery method, fixation/weight-reduction of the leached arsenic, optimization of the zinc recovery method, optimization of the final waste water treating process, study of the design/construction/operation of the pilot plant, etc. (NEDO)

  1. Fiscal 1997 report on the results of the international research cooperation project for a feasibility survey for finding out seeds of the international joint research. Effective use technology of saturated hydrocarbon (technology against the surplus aromatic hydrocarbon/technology of high grade treatment of petroleum coke); 1997 nendo kokusai kenkyu kyoryoku jigyo (kokusai kyodo kenkyu seeds hakkutsu no tame no FS chosa). Howa tanka suiso no yuko riyo gijutsu / hokozoku tanka suiso no yojo taisaku gijutsu / sekiyu cokes no kodo shori gijutsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For the purpose of the effective international research cooperation, the paper surveyed in fiscal 1997 the effective use technology of saturated hydrocarbon, technology against the surplus aromatic hydrocarbon and technology of high grade treatment of petroleum coke. In the survey of the effective use technology of saturated hydrocarbon, trends of FT synthesis technology and DME synthesis technology were studied as trends of technology to produce synthetic gas, and a project was proposed for technical development of using natural gas as liquid fuel in Japan. In the survey of technology against the surplus aromatic hydrocarbon, studied were the benzene law regulation and the supply/demand trend of aromatic hydrocarbon, process to reduce production of aromatic hydrocarbon as much as possible, process to reduce aromatics of the produced petroleum products, and process to effectively use aromatic hydrocarbon as chemical raw material. In the survey of high grade treatment of petroleum coke, studied were a possibility of using HS petroleum coke in the DIOS method, iron bath gasification, and copper bath gasification technology. 108 refs., 146 figs., 103 tabs.

  2. FY 2000 report on the results of the development of technology for commercialization of the photovoltaic power system - Development of production technology of thin film solar cells. Separate Volume 1. Development of production technology of low cost/large area modules (Investigational study on the commercialization analysis); 2000 nendo New sunshine keikaku seika hokokusho. Taiyoko hatsuden system jitsuyoka gijutsu kaihatsu {sup H}akumaku taiyodenchi no seizo gijutsu kaihatsu{sup -} Tei cost dai menseki mojuru seizo gijutsu kaihatsu (Jitsuyoka kaiseki ni kansuru chosa kenkyu) - 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of supporting the study of commercialization of thin film solar cells for electric power use and the study of production technology of thin film solar cells, survey of the technical trend of the thin film solar cell was conducted, and the FY 2000 results were summed up. The typical Si system thin film solar cell is the amorphous Si solar cell, and the quantity production has already started in Japan and abroad. Further, with the aim of making use of characteristics of the amorphous Si solar cell and also making its defects up, the development of Si thin film solar cell using microcrystal Si and polycrystal Si is greatly expected. Among those, attention is paid to the hybrid type that was proposed for the remarkable improvement in the conversion efficiency of amorphous Si solar cell. In the compound thin film system, the Cu(InGa)Se{sub 2}(CiGS) solar cell was put on the market as product by SSI, though the market scale is small. Further, as to the CdTe thin film solar cell, trial manufacture of the large area module was made in view of the housing use. In addition, there was seen great progress in the color sensitized cell and organic semiconducting solar cell mainly in the U.S. and Europe. (NEDO)

  3. FY 2000 report on the results of the development of technology for commercialization of the photovoltaic power system - Development of production technology of thin film solar cells. Separate Volume 2. Development of production technology of low cost/large area modules (Investigational study on the commercialization analysis); 2000 nendo New sunshine keikaku seika hokokusho. Taiyoko hatsuden system jitsuyoka gijutsu kaihatsu {sup H}akumaku taiyodenchi no seizo gijutsu kaihatsu{sup T}ei cost dai menseki mojuru seizo gijutsu kaihatsu (Jitsuyoka kaiseki ni kansuru chosa kenkyu) - 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of grasping/analyzing the technical trend of low cost/large area modules of thin film solar cells in Japan and abroad and of promoting a developmental study of the element technology necessary for commercial production of thin film solar cells, an investigational study was made in the section meeting of thin film technology by learned people in industrial/university/official circles, and the FY 2000 results were summarized. The 1st section meeting was held in September, and discussion was made about the developmental plan in FY 2000 and the state of progress. The 2nd section meeting was held in January, and discussion was made about the state of progress. As to the state of progress of the project for technology development, report/discussion were made about the following: development of low cost production technology of large area glass substrate modules, development of low cost production technology of large area flexible modules, development of production technology of high reliability CdTe solar cell modules, development of production technology of CIS solar cell modules, development of production technology of thin film polycrystal solar cells, development of production technology of application type new structure thin film solar cells, etc. (NEDO)

  4. Model operation to improve energy consumption efficiency in developing countries (demonstration study on material preheating equipment for an electric furnace (using reduced iron as a raw material)). Investigation project 2. Report on histories of energy saving technologies and environment preserving measures used in Japanese iron and steel industry; Hatten tojokoku energy shohi koritsuka model jigyo (denkiro no genryo yonetsu sochi (kangen tetsu genryo) ni kakawaru jissho kenkyu (chosa jigyo 2)). Nippon tekkogyo ni okeru sho energy gijutsu to kankyo taiskau gijutsu no tekishi hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    With an objective to contribute to economic growth and global environment preservation in the Asian territories, investigations were made on histories of energy conservation and environment preserving measures used in Japanese iron and steel industry. Energy conservation in blast furnace and converter methods are based on the following actions: improvement in energy efficiency (charging moisture adjusted coals and other techniques), energy recovery (blast furnace gas expander power generation and converter gas recovery), process simplification (continuous casting, heated piece charging and other techniques), and use of alternative energies. With regard to the environment, application of such environmental preserving measures have been advanced rapidly since the 1965`s as waste gas reduction, coke furnace gas liquefaction, and reduction of dusts, soots and noise. At the same time, slag re-utilization has been moved forward. As the building material demand has increased, the use of electric furnace steel making process using scraps has increased, whose production has exceeded one-third of the crude steel production, or 32 million tons. Energy conservation in the electric furnace process consists of use of ultra high power, direct current and scrap preheating, by which unit requirement in calorific power was reduced from 1.5 million to 1.2 million kcal/t or less. The unit requirement for energy consumption for crude steel production in the Japanese iron and steel industry has reduced by 10% from 4.96 million kcal/t in fiscal 1980 to 4.44 million kcal/t in fiscal 1989. 159 refs., 84 figs., 25 tabs.

  5. Committee for international collaborative research of medical and welfare apparatus; Iryo fukushi kiki kokusai kyodo kenkyu jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The paper summarized activities for an investigational study on the international collaborative research project on the medical and welfare apparatus implemented in fiscal 1995. As investigation activities, the second meeting of information exchanges with E.U. and three north European countries was held following the meeting in fiscal 1994, and at the same time, information exchanges were made with organizations/institutions of industry/government/university in Germany, France and Canada. The study made it clear that Europe is also taking a direction of low-degree action diagnosis/care as Japan is. Further, concrete exchanges of information advanced and an awareness of the common issues was made clear such as the necessity of developing apparatus which meets the apparatus market and users` needs. As international collaborative activities, new methods of information exchanges were adopted such as the satellite meeting of the International MR Society, meetings with researchers who visited Japan. The satellite meeting of the International MR Society was favorably accepted by participants, and it was pointed out that it is important to continue the meeting in view of the materialization of themes, etc. 4 refs., 32 figs., 5 tabs.

  6. Nursing care vehicles for future aged and welfare society; Kaigo sharyo-koreika/kodo fukushi shakai ni mukete

    Energy Technology Data Exchange (ETDEWEB)

    Kizaki, Y.; Yamagachi, M. [Deihatsu Mecor Co. Ltd., Osaka (Japan)

    1998-06-01

    While Japan is becoming a advanced aged and few children society, besides the welfare vehicles for public use and for various institutions, needs for home care, namely the personal use, increases rapidly. Therefore, it is expected that in the near future various welfare vehicles having different structures will be developed to meet to different uses and different needs. The welfare vehicles are roughly divided into two kinds as physically handicapped person self-operating vehicle, and nursing person operating and physically handicapped person boarding on vehicle. In this paper, the later, namely the nursing care vehicles, is introduced. As the nursing care vehicles used at present, transportation vehicles as wheelchair and stretcher, rotary sheet or a vehicle with a sheet lift, movable bath vehicle and other kind of care vehicles are explained respectively. At last, the functions which are required strictly for these nursing care vehicles are mentioned. 5 refs., 9 figs., 2 tabs.

  7. Research study of conjugate materials; Conjugate material no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper reported an introductory research on possibilities of new glass `conjugate materials.` The report took up the structure and synthetic process of conjugate materials to be researched/developed, classified them according to structural elements on molecular, nanometer and cluster levels, and introduced the structures and functions. Further, as glasses with new functions to be proposed, the paper introduced transparent and high-strength glass used for houses and vehicles, light modulation glass which realizes energy saving and optical data processing, and environmentally functional glass which realizes environmental cleaning or high performance biosensor. An initial survey was also conducted on rights of intellectual property to be taken notice of in Japan and abroad in the present situation. Reports were summed up and introduced of Osaka National Research Institute, Electrotechnical Laboratory, and National Industrial Research Institute of Nagoya which are all carrying out leading studies of conjugate materials. 235 refs., 135 figs., 6 tabs.

  8. Material design related investigation. Investigation on the bionic design; Zairyo sekkei kankei chosa. Bionic design ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    The biomolecular characteristics were analyzed to establish the basic technology for the utilization of artificial joint, liver and muscle. The rise in functional grade of biomolecules themselves, and inter-biomolecular recognition and bonding rationally and teleologically generates living body`s functions to form the structure and drive the molecules. Energywise extremely advantageous, those functions serve to creatively produce the artificial internal organs and elucidate the function of biotissue, if the tissue and function of living body can be artificially restructured by utilizing the biomolecular mechanism to make the tissue self-proper. It is the concept of bionic desing research. Methodologically, the inter-bimolecular action is to be synthetically analyzed through bio/physicochemistry-based computer simulation. The artificial materials excelling in adaptability to the living body are to be developed by analyzing the mechanism for the biotissue. The molecules-driving function is also to be analyzed which is generated dy the high-grade bonding of muscular and other high biomolecules. 280 refs., 69 figs., 9 tabs.

  9. Application to the field of medical and welfare with fluid power; Fluid power servo no iryo fukushi bun`ya eno oyo

    Energy Technology Data Exchange (ETDEWEB)

    Hayakawa, Y. [Nara Technical Coll., Nara (Japan)

    1999-05-15

    Reported herein are medical and welfare apparatuses activated by fluid power servos. Reference is also made to equipment now undergoing research and development. Numerous fluid power-driven welfare and caring apparatuses have been developed, some of which are named below. In an externally powered prosthetic leg, a rocking type hydraulic servo actuator is attached on the knee section. In this device, switching is performed between an active operation in which much torque is required for instance going up and down a stairway and a passive operation in which less torque is required for instance walking on a flat place, this for increased energy efficiency. In an externally powered orthosisis, an exoskeleton is installed on the lower extremities of a patient suffering from the paralysis of both legs, and enables physical exercises for rehabilitation. Such devices are controlled by one of the two methods, the master-slave method or the manual method. Devices for the transfer of patients include an in-home bathing assist system, powered assist suit for caring, powered assist chair, movable lift for transfer, pneumatic Rubbertuator-driven rehabilitation equipment, walk training device, and wavy motion pneumatic vibrator. (NEDO)

  10. The effect of choline-stabilized orthosilicic acid on microelements and silicon concentration, photosynthesis activity and yield of tomato grown under Mn stress.

    Science.gov (United States)

    Kleiber, Tomasz; Calomme, Mario; Borowiak, Klaudia

    2015-11-01

    The aim of experiments was to assess the efficiency of choline-stabilized orthosilicic acid (ch-OSA; complex of orthosilicic acid with choline and a bioavailable source of silicon) application under increasing manganese (Mn) stress on the micronutritional composition and yielding of tomato (Solanum lycopersicum L. cvs. 'Alboney F1' and 'Emotion F1'). Plants were grown in rockwool with the application of a nutrient solution varied the Mn concentrations (in mg dm(-3)): 9.6 and 19.2 which cause strong oxidative stress of plants comparing with optimal concentration of that microelement in nutrient solution. The effect of ch-OSA application (at Si concentration of 0.3 mg dm(-3) nutrient solution) was investigated at both Mn-levels. Increasing Mn stress modified the concentration of microelements and silicon (Si) in tomato leaves. Application of ch-OSA also influenced the concentration of nutrients, but the determined changes were generally multidirectional and varied depending on Mn-level and cultivar. Under the increasing Mn stress a significant downward trend was observed for the mean concentration of Fe (in both cultivars) in fruits--but changes of Mn, Zn and Cu were varied depend on cultivar. In the case of cv. 'Alboney F1' ch-OSA application caused an increase the mean concentrations of Fe, Zn and Cu, while in the case of cv. 'Emotion F1' the reduction of mean concentrations of Zn and Cu was recorded. Ch-OSA treatment did not influence on the Mn concentrations in fruits. A beneficial role of ch-OSA was also found in photosynthesis activity. This was especially valid for lower levels of Mn. Application of ch-OSA improved significantly the marketable yield of tomato under stress by a low Mn level.

  11. Trend survey of the global environment adaptation type industrial technology. Chikyu kankyo tekiogata sangyo gijutsu doko chosa. ; Chikyu kankyo kanren kenkyu doko no chosa (nisanka tanso no kankyo fuka teigensaku ni kansuru chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    The paper studies the measures for reduction of environmental load of CO2 from the standpoint of chemical technology. As for methanol synthesis from CO2, accelerating of the reaction using Cu base compound catalyst is reported. Also, CO2 is methanated at high speed by low temperature waste heat using Ni-La2O3-Ru catalyst. Discussions are given on the subject for development of catalyst reaction relating to hydrogen production technology by methane reforming reaction using steam or CO2. Synthesis of polymetric materials by use of CO2 is also described. The paper mentions that it is indispensable to design high-function electrode and elucidate the reaction mechanism of electrochemical CO2 reduction for electrochemical and photochemical CO2 reduction measures. Moreover, in case of using solar energy, it is required to study photovoltaic excitation process in semiconductor electrode/ electrolyte solution interface. For production of hydrogen from CO2 by photosynthetic organisms and solar energy, the problem is control of inhibiting effect of oxygen combinedly produced. Described are production of polyhydroxy butyric acid and biodegradable polymer from CO2 and hydrogen by bacteria, and CO2 fixation imitating the enzyme reaction. 267 refs., 79 figs., 32 tabs.

  12. Nation-wide geothermal resources exploration project. (3rd phase). ; Regional exploration of geothermal fluid circulation system. Zenkoku chinetsu shigen sogo chosa. 3. ; Koiki nessui ryudokei chosa (zokuho)

    Energy Technology Data Exchange (ETDEWEB)

    Okada, H.; Sasada, M. (New Energy Industrial Technology Development Organization, Tokyo (Japan) Yamada, K. Dowa Engineering Co. Ltd., Okayama (Japan)); Sakai, S. (Mitsui Mineral Development Engineering Co. Ltd., Tokyo (Japan)); Shibuya, A. (Sumiko Consultants Co. Ltd., Tokyo (Japan))

    1992-03-31

    This paper summarizes the result of a regional exploration of geothermal fluid circulation system, carried out in the regions of Akitakoma, Bandai and Aso in relation with the general development of methods to analyze geothermal exploration information targeted in the third nationwide geothermal resources exploration project. These regions are the three regions out of six extracted from all over Japan as the major regions of volcanic geothermal fluid convection type. Estimation is made in each region on predominant locations of heat source, and extraction is given on promising geothermal areas based on evaluations on the reservoir structure, thermal structure, and fluid flow mechanism. Major heat sources in the Akitakoma region exist in the Akitakoma volcano and the Amihari {center dot} Iwate vocanos, and the most promising areas are the upper streams of the Kuzuneta River, Matsukawa River, and Sendatsu River. The heat sources in the Bandai region are in the Azuma volcano, Adatarayama volcano, and Bandai volcano, the most promising areas are the east part of the Mt. Azuma and the Tsuchiyu area. Inference has been made in the Aso region on existence of heat sources in the old and new groups of volcanic cones, and the Yunotani {center dot} Tarudama area has the highest geothermal potential. 7 refs., 6 figs.

  13. Faults survey by 3D reflection seismics; Sanjigen hanshaho jishin tansa ni yoru danso chosa

    Energy Technology Data Exchange (ETDEWEB)

    Tsuchiya, T.; Ejiri, T.; Yamada, N.; Narita, N.; Aso, H.; Takano, H.; Matsumura, M. [Dia Consultants Company, Tokyo (Japan)

    1996-10-01

    This paper describes fault survey by 3D seismic reflection exploration. Survey has been conducted mainly at flat land area without pavement not in urban area in Japan. Subsurface structure is complicated with intersecting multiple faults. In this area, a lot of geological investigations have been done prior to the seismic reflection exploration. Fairly certain images of faults have been obtained. However, there were still unknown structures. Survey was conducted at an area of 170m{times}280m in the CDP range. Measurements were carried out by using 100 g of dynamite per seismic generation point combined with 40 Hz velocity geophones. Fixed distribution consisting of lattice points of 12{times}12 was adopted as an observation method. In and around the lattice, a great number of explosions were carried out. The CDP stacking method and the method of migration after stacking were used for the data processing. The 3D structures of six horizons and five faults could be interpreted. Interpreted horizons were well agreed with the logging results. 3 figs.

  14. Investigation on research for degradable plastics; Bunkaisei plastic no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Nishiyama, M.; Hosokawa, J.; Yoshihara, K.; Kubo, T.; Kabeya, H.; Endo, T.; Kitagawa, R. [Shikoku National Industrial Research Institute, Kagawa (Japan)

    1994-03-31

    The paper investigates and reports problems on plastic waste and measures to solve them, and the developmental trend of main biodegradable plastics in the world. A large quantity of plastic waste neither rots nor returns to the nature even if reclaimed. The recycling system has not yet been established due to its low price. Therefore, countries are carrying out regulations on prohibition on the use of foamed polystyrene, compulsory use of degradable plastics, taxation on plastic bottles, etc. Among biodegradable plastics, a type of polyethylene blended with starch is legislated for its use in the U.S., but is met with opposition by environmental organizations because of its plastic powder remaining in the soil. Contrary to this partial degradability, the following are cited as completely degradable plastics: bioplastics based on microorganism, natural polymer based on plants and animals, and biodegradable synthetic polymer. Any of them, however, is still in the stages of research/development and commercialization. 376 refs., 28 figs., 37 tabs.

  15. Investigational research on eco-smart engines; Eco-smart engine no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper investigated the trend of research on eco-smart engines into which optimization function of engine performance, high environmental-adaptability, etc. are integrated. The investigation was made in Japan and abroad on technologies of combustion, structure/material, control, design/analysis, systematization, etc. In case of Japan, specifications were established for three types of engines, subsonic, supersonic and hypersonic aircraft, and the research subjects to fulfil the specifications were extracted. In case of the U.S. and Europe, the survey was made of combustion, materials, noise, design concept, control, etc. Important subjects are selected in priority order. Namely, for the enhancement of efficiency, the following were taken up: three-dimensional fiber-reinforced large-size light-weight structure application technology, heat-resistant advanced-material structure damage-tolerant design technology, pseudo-vesicular structure transpiration cooling technology, etc. For the reduction of NOx emission, the paper took up technologies of environmentally optimization combustion, AI combustion control, and non-cooling combustor liner application. For the noise reduction, technologies of new inclination hole orientation noise absorbing structure material application, super noise control, and innovative CFD utilization low noise aerodynamics. Moreover, the results of fiscal 1997 were outlined to indicate the research in the next fiscal year. 14 figs., 10 tabs.

  16. Research study on harmonized molecular materials (HMM); Bunshi kyocho zairyo ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    As functional material to satisfy various needs for environmental harmonization and efficient conversion for information-oriented and aging societies, HMM were surveyed. Living bodies effectively carry out transmission/processing of information, and transport/conversion of substances, and these functions are based on harmonization between organic molecules, and between those and metal or inorganic ones. HMM is a key substance to artificially realize these bio-related functions. Its R & D aims at (1) Making a breakthrough in production process based on innovation of material separation/conversion technology, (2) Contribution to an information-oriented society by high-efficiency devices, and (3) Growth of a functional bio-material industry. HMM is classified into three categories: (1) Assembly materials such as organic ultra-thin films (LB film, self-organizing film), and organic/inorganic hybrid materials for optoelectronics, sensors and devices, (2) Mesophase materials such as functional separation membrane and photo-conductive material, and (3) Microporous materials such as synthetic catalyst using guest/host materials. 571 refs., 88 figs., 21 tabs.

  17. Investigation on global warming gas methane; Ondanka gas methane ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    This paper summarizes the current status of research and development on generation of methane gas whose contribution to global warming is said to reach 18% as an atmospheric greenhouse effect gas. Systematization was made in the paper on the status of investigations and researches on different sources of methane gas. Measurement data are insufficient for swamplands, and amounts of methane generated in major swamplands in the world are being measured. Very few researches have been made on termites. Oceans were indicated that closed water areas are the sources of methane generation. Inland waters are in the stage of elucidating the methane generating mechanism. Methane hydrates are estimated being discharged from thawing of frozen soil. No measuring methods have yet been established for volcanic mountains. Discharge coefficient was sought for methane generation energies, and discharge amount in the global level was estimated from statistical data such as amount of production. With regard to agriculture, studies on mechanisms and measure technologies have been advanced on rumination of livestock. Data for paddy fields are being accumulated. Wastes have measurement data accumulated, and discussions are being made on discharge amount estimation and measure technologies. 30 refs., 32 figs., 28 tabs.

  18. Research on the proficient machine system. Theoretical part; Jukutatsu machine system no chosa kenkyu. Rironhen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The basic theory of the proficient machine system to be developed was studied. Important proficient techniques in manufacturing industries are becoming extinct because of insufficient succession to next generation. The proficient machine system was proposed to cope with such situation. This machine system includes the mechanism for progress and evolution of techniques and sensibilities to be adaptable to environmental changes by learning and recognizing various motions such as work and process. Consequently, the basic research fields are composed of thought, learning, perception and action. This machine requires not only deigned fixed functions but also introduction of the same proficient concept as human being to be adaptable to changes in situation, purpose, time and machine`s complexity. This report explains in detail the basic concept, system principle, approaching procedure and practical elemental technologies of the proficient machine system, and also describes the future prospect. 133 refs., 110 figs., 7 tabs.

  19. Recent surveys and researches on pollinosis in Japan; Kafunsho ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Shido, T. [The Inst. of Public Health, Tokyo (Japan)

    1998-05-31

    In this paper, recent investigations and researches on pollinosis are summarized as centering on the investigation entrusted by the Ministry of Health and Welfare and executed since 1992, and especially the surveys on Japanese cedar pollinosis during 1995 to 1996. The quantity of pollen surveyed in 1995 is the greatest in the survey history of nationwide flying pollen. Particularly, the quantity of cedar and hinoki pollen is 10 to 40 times as many as that in the year before. Consequently, since the sensitization and onset due to the cedar pollen increased greatly, the objects of the surveys and the researches were mainly in respect to the analysis of onset factors of pollinosis, clarification of its natural process, evaluation on the effectiveness of desensitization therapy, the clinical subjects including the confirmation of pharynx symptom and asthma symptom, and the discovery of naturally sensitizing dog. A fact that the quantity of flying pollen concerns the occurrence and degree of the clinical symptom has already been indicated by a clinical observation carried out for a long period of time. In respect to specific prophylaxis and therapy, for the first time the pollen masks and glasses sold on the market are investigated, and the necessity of the verification thereof is described. 27 refs., 7 figs., 5 tabs.

  20. Investigations on forests from viewpoints of global environment; Shinrin no chikyu kankyoteki shiten kara no chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Forests have become drawing attention as an absorption source of carbon dioxide, a greenhouse effect gas. This paper discusses significance of forests from viewpoints of their roles as diverse ecological systems and socio-economic values. Forest is a place for living and resting of all kinds of living organisms including plants, animals and microorganisms. Living forms in forests being affluent in kinds and large in amount bring great favor to human societies. Forests play diversified roles other than biological roles in addition to largely affecting heat distribution on the ground through evapotranspiration. These roles include suppression of erosion on ground surface, alleviation of micro climate by reducing wind velocity on the ground, and disaster prevention. Forests have an aspect of supply source of production resources for societies as well as an aspect of unused lands. Efficiency of converting solar energy by plants looks inferior to that of solar cells. Biomass may be regarded as regenerative energy limited to a case where excess production is utilized. 142 refs., 56 figs., 44 tabs.

  1. Research on harmonized molecular materials; Bunshi kyocho zairyo ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Harmonized molecular materials (HMM) were researched to create functional materials adaptable to needs such as environmental harmony and high-efficient conversion in post-industrial society and aging society. Superior mechanisms function efficiently in organisms for perception, transmission and processing of information, and transport and conversion of substances. These functions are caused by harmonization between organic molecules, or organic molecule and metal or inorganic substance. HMM is a key substance to realize these functions similar to those of organisms artificially. It is the purpose of this research to develop HMMs, reform production process by innovating separation and conversion technologies, and finally realize molecular chemical plants. This research also develops high-efficient devices to contribute to the information society, and progresses the industry of bio-functional materials such as high-sensitive bio-sensor. The functions, applications and creation technologies of three kinds of HMM such as assembly, mesophase and microporous materials were researched in fiscal 1995. 956 refs., 128 figs., 13 tabs.

  2. Preliminary survey of `Green Recycling System`; Jigyo jizen chosa `green recycle system`

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This report describes the construction of `Green Recycling System` which aims to change deserts to lush lands and to stabilize food supply. A cross-linked polymer produced by irradiating the gooey threads of natto (fermented soybeans) with gamma rays can absorb and hold up to 5,000 times its own weight of water. This biodegradable polymer may be used to develop seed gels and pellets to grow soybean, rice and wheat to improve the productivity of deserts and to protect threatened lands from desertification. This technology will be of great value in establishing stable supply of food resources, especially for the Middle East where deserts are expanding as well as for Africa where serious food shortage is already in place. To undertake the Green Recycling System Project, it is indispensable to develop technologies for producing PGA polymer in large quantity, mass production process of bridged PGA through radiation, chemical cross-linkers, new technologies for growing plants using water retainers, water-retaining materials for arid areas, general systems for growing plants in arid areas, and environmentally benign industrial infrastructures. 76 refs., 59 figs., 29 tabs.

  3. Survey on commercial use of fuel cells; Nenryo denchi ni kansuru jitsuyoka no tame no chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The basic survey was carried out for the future approach to R & D of fuel cells. Phosphoric acid fuel cell (PAFC) is in the stage of demonstration research and field test supported by subsidy after the end of Sunshine project. Its reliability and durability problems are being solved, and its cost reduction is only one problem for practical use. Distributed systems or on-site systems will be used utilizing its excellent environmental characteristics. Molten carbonate fuel cell (MCFC), solid oxide one (SOFC) and polymer electrolyte one (PEFC) under development were thus surveyed. The following are surveyed: (1) Contribution to a human society such as improvement of energy demand/supply structure and environmental protection, (2) Technological items such as outlook for R & D, validity of developmental issues, comparison between various R & D and significance in industrial promotion, (3) Economic items such as profitability and feasible period, and (4) Social items such as sociability, compatibility to needs, possibility of locations, international meaning, market scale and promotion scenario. 90 refs., 67 figs., 96 tabs.

  4. Research study on highly functional carbon related materials; Tansokei kokino zairyo no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The study results on highly functional carbon related materials are reported as a part of the leading research in fiscal 1996. Synthesis of these novel materials is outlined, and R & D results on the following materials are described: diamond, hetero-diamond, graphite, amorphous carbon, carbyne, fullerences, carbon nitride and chemically modified carbon materials. Their issues, future possibility and market in 2010 are also described. The markets are predicted of such electronic materials as electronic emitter, sensor, solid device and heat sink, such optical materials as X-ray lithography, and such chemical materials as electrode and catalyst. Promising characteristics of light-weight and high-hardness machine materials are presented, and some issues such as material synthesis, and intensive machining and application technologies are described. The future markets are predicted of their applications to tools, dies, information equipment, glass, automobiles, aircraft, spacecraft and industrial machines. Problems and their break through techniques of these novel materials are also presented. 220 refs., 68 figs., 16 tabs.

  5. Investigation on food sanitation controlling technologies; Shokuhin eisei kanri gijutsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    Doi, Y. [Hokkaido Electric Power Co. Inc., Sapporo (Japan); Nishioka, J.

    2000-03-24

    Investigation has been made on the current status of food sanitation controlling technologies. Eighty percent of food poisoning is caused by bacte such as Salmonera, enteritis vibrio, staphylococcus, and pathogenic colibacillus. Putrefaction as the cause for food poisoning occurs from proliferation of different microorganisms. Heating sterilization is the main method being performed, but non-heating method may include sterilization by flash and high voltage pulse discharge in addition to ultra-high pressure and ultraviolet ray sterilization. As a result of the questionnaire survey, what is extracted as the problems in the food sanitation controlling technologies is to establish a rinsing and sterilizing method with large sterilization effect, an effective sterilizing method and thawing of processed marine products, and a cooling method in food processing. Increasingly demanded for the future is to develop a foodstuff sanitation control system using as the core the hazard analysis critical control point (HACCP, a quality control program developed by the U.S. NASA to ensure safety in manufacturing space food), and micro-organism control and sterilizing technologies to support the above system. The flash pulse and high-voltage pulse sterilizing technologies as the non-heating sterilizing technology are more effective than the conventional heating sterilization methods also from the aspect of quality retention after sterilization. More active development thereof is desired. (NEDO)

  6. Survey on the FRP waste recycling system; FRP haikibutsu recycle system ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Using the area around the Ariake Sea in Kyushu as a model case, the FRP (fiber reinforced plastics) waste recycling system which can be established in Japan has been investigated in cooperation with local government bodies and fishery organizations. As a result, some proposals are provided. The recovery of waste boats utilizing existing sales outlets for fishing boats will facilitate efficient transport, efficient removal of vessel fixtures, and information management and user guidance via existing sales routes. This should make it possible to systematically secure and dispose a certain volume of scrapped FRP boats, and thus generate savings in the disposal costs. In the Phase 1, the main focus will be on establishing the recovery system for scrapped FRP boats to promote reuse and prevent improper disposal. In the Phase 2, the economics will be improved by expanding the recovery system to include other FRP waste products. In the Phase 3, the number of recyclable items will be increased, and thus the recycling system will be completed. 3 refs., 11 figs., 7 tabs.

  7. Ground water contamination by electrical prospecting; Denki tansaho ni yoru chikasui osen chosa

    Energy Technology Data Exchange (ETDEWEB)

    Irie, S.; Fujii, Y.; Sakaguchi, S.; Ushijima, K. [Kyushu University, Fukuoka (Japan). Faculty of Engineering

    1996-05-01

    A report is made about the result of vertical electric sounding conducted in the MK district, Fukuoka City, where Kyushu University is about to move. As for the method of electrical prospecting, in consideration of the need for probing a depth of 50m at the shallowest, vertical electrical sounding with a Schlumberger array of electrodes was employed. Measurements were made for 57 locations on the planar ground, the interval between electrodes gradually increased from 1 to 200m. In the 2D structure model analysis, a 2D inversion program was utilized in the ABIC minimization method. Also investigated were the relationship of electric prospecting and the geology, geological conditions, water level in the well, water quality, salt water, and pore rate from the previously-conducted investigative boring. As the result, it was estimated that the boundary between the first and second layers detected by electric prospecting reflected the level of underground water and that the boundary between the second and third layers reflected the portion where the N-value sharply increases. 4 refs., 8 figs.

  8. Investigation into the emission of greenhouse effect gases; Onshitsu koka gas no haishutsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper grasped the situation of greenhouse effect gas emissions of advanced countries based on the reports from them. The advanced countries which concluded the U.N. Framework Convention on Climate Change (OECD member countries, the former U.S.S.R., and East European countries) are to be reported to the office concerned with work for the framework the situation of their greenhouse effect gas emissions according to the obligation of the framework. In and after April 1997, they made the second report. The paper summarized changes in emission amount, the future trend, and the policies/measures mainly taken of nine countries which have already presented the second report (the U.S., the U.K., Germany, Holland, Italy, Norway, Sweden, Finland, and New Zealand) and one country (Russia) which has made only the first report. Moreover, the literature was collected and summed up concerning the mechanism and coefficients of the emission of nitrous oxide and methane. The collected literature was classified into all fields/plural number of fields, energy relation, industrial process relation, relation with the use of organic solvent and other products, agricultural relation, relation with changes in land use and forests, and waste relation. 4 figs., 228 tabs.

  9. Marking methods to monitor bivalve habitat; Nimaigai no seisoku monitoring chosa ni mochiiru hoshiki gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Lim, B.K.; Koshikawa, Y.; Sakurai, N. [Kajima Corp., Tokyo (Japan)

    1999-09-30

    Bivalves inhabiting in coastal areas, e.g., asari and shijimi clams, are important fishery resources and helping clean water. The living environments and resources of these bivalves can be followed by releasing the marked bivalves and catching them again. These surveys with marked habitats give the visible results of their living conditions, easily understandable to anyone, even he is not an expert. Traditionally, the bivalves are marked by various methods before being released, e.g., marked with paint, manicure, adhesive or the like, or scratched on part of the shell surfaces. Such a method, however, needs a lot of time and cost for marking a number of bivalves, and may damage their product values, because of the mark they carry. This company has developed a technique for marking bivalves with iron rust and metallic pieces. This technique has no adverse effects on growth and living of the bivalves, and causes no damage of their product values. It has been applied to surveys on environments in which asari clams inhabiting in natural tidelands and artificial seashores. (NEDO)

  10. Information survey on new energy technology development. Shin enerugi gijutsu kaihatsu joho chosa

    Energy Technology Data Exchange (ETDEWEB)

    1987-03-01

    In developing new energy technology, it is necessary to make up a long term plan on the basis of deep considerations on both the trend of the energy demand and the needs of the social economy. This survey collected, on the macroscopic basis, the informations on the governmental policy on energy development, trend of move of government institutions and enterprises on the technical development, and documents as a result of conference and academic meetings. As an example, the USA section consists of descriptions on: DOE budget of the Federal Government. Solar energy (Solar cell, solar thermal). Geothermal energy. Coal energy. Ocean energy. Biomass energy. This report consists totally of 230 pages, the break down of which is 83 pages for USA section, 34 pages for West germany, 28 pages for UK, 32 pages for France, and 44 pages for a literature list in the countries outside Japan.

  11. Research on feasibility of development energy combining technology; Energy fukugoka gijutsu kaihatsu no kanosei chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Iida, Y. [Yokohama National University, Yokohama (Japan). Faculty of Engineering; Ozawa, Y. [Takasago Thermal Engineering Co. Ltd., Tokyo (Japan); Akai, M. [Mechanical Engineering Lab., Tokyo (Japan); Nishio, S. [The University of Tokyo, Tokyo (Japan). Institute of Industrial Science; Yamasaki, H. [Tokyo Institute of Technology, Tokyo (Japan); Takenaka, H.

    1996-02-01

    Various energy-related issues were analyzed in a many-sided and compound manner; and as their solutions, various combined systems were examined on the assumption that functional mediums, core technology and regional district characteristics were utilized; and an explanation was given in the case of using hydrogen as an energy medium. Hydrogen was a strong candidate capable of securing toughness in energy flow; and an idea was shaped about introducing hydrogen by steps before structuring a hydrogen society that is to replace the petroleum society. In the case of introducing a hydrogen energy medium into an intelligent building, the characteristics would be such that it is a highly efficient system capable of supplying energy in the form of electric power, hydrogen and heat, that it brings in a function for leveling a load of electric power, that it facilitates consistency with each energy in various uses, and that it is capable of dealing with a demand for hydrogen energy which is expected to increase in the future. It is highly probable that the system will become an attractive one in view of environment and social economy. 8 refs., 4 figs.

  12. Survey of Joint Implementation activities in China; Chugoku ni okeru kyodo jisshi katsudo kanren chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    It is a large task for Japan to positively promote the Joint Implementation activities related to the United Nations Framework Convention on Climate Change. Rapid increase in the emission of greenhouse-effect gases, especially CO2, is predicted in China with remarkable economic growth and population of 1.2 billion. It is essential to promote the Joint Implementation activities in China. In this survey, framework, organization, problems and tasks were investigated to effectively promote the Joint Implementation activities in China. Construction of framework for the real Joint Implementation activities has been proposed. Current problems for promoting the Joint Implementation activities in China are that the distinct guideline for the Joint Implementation is not established in the government, that the receiving system including receiving, planning and arranging sections is not established, and that the burden problems for the costs of project evaluation, data acquisition, monitoring, and verification are not solved. 5 refs., 21 figs., 6 tabs.

  13. Investigation of inheritance of history of industrial technology. 2; Sangyo gijutsu rekishi keisho chosa. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    For the inheritance of industrial technology in the past and to ensure its creative utilization, investigations were conducted into the current state of typical research information networks on the national and local level. In the process of development of industrial technology in Japan, local areas with their own peculiar traits assume very important roles. But, in such areas, important information about technology is being dissipated. As a typical network related to scientific and technological information, there exists the JOIS network of JICST, which enables the use of JICST-compiled literature and factual data base and other data bases JICST obtained from other organizations. In case of STN International of Germany, data base is a commonly owned property and each user can unlimitedly use the data bases belonging to other organizations. The Academic Information Center system offers information on books stored in university libraries and university-compiled data bases, and is equipped with the function of electronic mailing. In the Tsukuba Network the researchers living in Tsukuba Academic New Town are combined with each other by personal computer lines for performing information-related services. 41 figs., 10 tabs.

  14. Microbially influenced corrosion of stainless steels; Stainless ko no biseibutsu fushoku ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Kimura, Y.; Misawa, M. [Kansai Electric Power Co. Inc., Osaka (Japan)

    1998-11-30

    It is generally known, though not fully clarified, that stainless steel pipes, particularly those exposed to natural sea water; are susceptible to microbially influenced corrosion (MIC) at welded joints. In an effort to gain a better understanding of the mechanism, factors affecting the MIC behavior in welded stainless steel pipe joints were experimentally investigated. Results of the study indicate there are two major contributing factors to MIC development in the weld region. One is the circumferentially protruding shape effect of the deposited metal, provinding an environment that allows aquatic microorganisms to adhere to the downstream side of the welded bead surface. The other factor is the declining corrosion resistance in the welded joint due to the oxide film formation caused by insufficient shielding during welding. There factors, if combined, produce higher susceptibility to MIC in the weld than in the base metal. (author)

  15. Survey on the succession situation of technologies; Gijutsu keisho jokyo chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    The basic survey was carried out to promote the succession and creative use of the previous industrial science and technology. The following 5 themes were summarized in fiscal 1993. On `Fuel technology policy and technological development,` Navy Fuel Depot, Chemical Research Institute at University of Kyoto, Central Laboratory of South Manchuria Railway Co., and Fuel Research Laboratory of the Ministry of Agriculture and Commerce played important roles, and the 1000atm continuous hydrogenation system was completed in 1941. On `Technology of long-distance power transmission,` high-voltage insulation technology finally reached an international level after World War II. On `Unification of frequency and electrical technology,` the two-frequency system for eastern and western areas was established before World War II, and construction of Sakuma Frequency Conversion Station allowed power interchange between two areas. On `Organization of national research laboratories,` the Agency of Industrial Science and Technology distinguished the roles of new and existing laboratories. On `Wind power technology in Europe and America,` comparison between American and Danish approaches is the most important issue today. 146 refs., 20 figs., 13 tabs.

  16. Survey and research on precision polymerization polymeric materials; Seimitsu jugo kobunshi zairyo ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Survey and research on the precision control of primary structure of polymeric materials and the precision evaluation technology have been conducted to develop advanced polymeric materials. It is proposed that the three basic processes of polymer synthesis, i.e., addition, condensation, and biomimesis, in forming the precision polymerization skeleton are to be covered through a centralized joint research effort with participation of industry, academia, and the government institute and under the leadership of researchers from academic institutions as the team leaders. For the study of technology trends, international conferences held in UK, Germany, and Hawaii are introduced, and domestic meetings, i.e., Annual Polymer Congress and Polymer Conference, are summarized. In addition, Precision Polymerization Forum and International Workshop on Precision Polymerization were held. The basic studies include a quantum-chemical elucidation of the elementary process in polymerization reaction, time-resolved analysis of polymerization process and polymer properties, synthesis of polymers with controlled microstructures by coordination polymerization using metal complexes, synthesis of polymer with controlled microstructures by precision polycondensation, molecular recognition in catalyst-reaction site, and synthesis of imprinting polymers. 246 refs., 117 figs., 14 tabs.

  17. Design and construction of the `Kairei` deep sea research vessel; Shinkai chosa kenkyusen `Kairei` no kenzo

    Energy Technology Data Exchange (ETDEWEB)

    Inokuma, M.; Kaku, I.; Iimori, T.; Yamashita, T.; Yamase, Y.; Iimoto, K.; Minami, K. [Kawasaki Heavy Industries, Ltd., Kobe (Japan)

    1997-10-20

    Japan`s first full-scale deep sea research vessel Kairei is introduced. Sonic equipment installed on this vessel includes a sonic navigation system, multi-narrow-beam echo sounder, multi-channel reflection profile system, etc. Sonic signals for positioning that the Kairei receives include those from responders aboard the remotely-controlled vehicle Kaiko and transponders set on the sea bottom. Noise reduction measures are taken against propeller noise radiated into the water and solid-borne noises produced by the propulsion engine and auxiliary machinery, this for neutralizing obstruction to the execution of the above-said measurements. The preliminary investigatory function as a submarine navigational aid conducts on-site investigations for the establishment of navigation routes and submarine navigation plans that serve the purpose. The submarine navigation aiding function is constituted of radio/sonic navigation units, multi-narrow-beam echo sounder, inboard LAN, etc. The launch/retrieval system retrieves the approximately 100kN Kairei in an ordinary retrieval operation when the 1/3 significant wave height is 2.5m or less and in an emergency retrieval operation when the same is 4m or lower. 6 refs., 9 figs., 2 tabs.

  18. Investigation research on autonomous responsive materials; Jiritsu oto zairyo ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    A survey was made on autonomous responsive materials as a new material which reversibly change molecular structures and the aggregation state according to external stimuli. Autonomous responsive materials imitate environmental responsibility in the living organism system and have sensing, control and active functions for external stimuli. The materials are highly efficient and environmentally friendly. In biomimetic materials for soft actuators, drastic changes by temperature of elastic modulus of water-swollen hydrogel are used to the motion. In order to molecularly design stimulus-responsible polymer gel, studied are the relation between the micro structure and stimulus responsibility, dynamic correlation between the micro structure and the macro structure, etc. In the biomedical field, new cure and diagnosis using innovative materials are expected, and the application of autonomous responsive materials to the field is studied. For example, using hydrogel responding the temperature and the surface and controlling by temperature the interaction with components of the organism such as protein and cells, drug delivery in the organism is optimized. Also studied is the application of hydrophilic/hydrophobic changes by temperature to the chromatography. 215 refs., 47 figs., 11 tabs.

  19. Econometric analysis on oil-substituting energy; Sekiyu daigae energy keiryo bunseki chosa

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    This is a fiscal 1991 report on the investigation having been carried out for the past 6 years by the Institute of energy Economics contracting with NEDO. The report is to make an overall evaluation of various aspects seen in the development of petroleum substitution energy in relation with the environmental problem. Various kinds of simulations are conducted by developing the industrial related model which can analyse effects of CO{sub 2} emmission control measures exerted on Japan{prime}s microeconomics such as the industrial structure, based on the analytical model which was developed by the fiscal 1990. For example, in establishment of 4 cases such as a standard case, a carbon tax imposition case, an industrial structure arrangement case and a high efficiency-new energy promotion case, signs are seen like that the primary energy supply in 2010 will decrease with heightening of energy price and improvement of consumption efficiency from 740 million kl in crude oil in the standard case to 620 million kl in the high efficiency-new energy promotion case, and CO{sub 2} emission will decrease from 440 million tons to 350 million tons. 14 refs., 65 figs., 114 tabs.

  20. Econometric analysis on oil-substituting energy. Sekiyu daigae energy keiryo bunseki chosa

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    This is a fiscal 1991 report on the investigation having been carried out for the past 6 years by the Institute of energy Economics contracting with NEDO. The report is to make an overall evaluation of various aspects seen in the development of petroleum substitution energy in relation with the environmental problem. Various kinds of simulations are conducted by developing the industrial related model which can analyse effects of CO{sub 2} emmission control measures exerted on Japan{prime}s microeconomics such as the industrial structure, based on the analytical model which was developed by the fiscal 1990. For example, in establishment of 4 cases such as a standard case, a carbon tax imposition case, an industrial structure arrangement case and a high efficiency-new energy promotion case, signs are seen like that the primary energy supply in 2010 will decrease with heightening of energy price and improvement of consumption efficiency from 740 million kl in crude oil in the standard case to 620 million kl in the high efficiency-new energy promotion case, and CO{sub 2} emission will decrease from 440 million tons to 350 million tons. 14 refs., 65 figs., 114 tabs.

  1. FY 1998 annual report on the medical/welfare equipment working group. 19th R and D activity report; 1998 nendo iryo fukushi kiki bunkakai. Dai 19 kai jigyo hokokukai

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-09-01

    Summarized herein are the FY 1998 activities by the environmental technology working group, extracted from the 19th R and D activity report by NEDO. Mr. Fujita, a NEDO's director, outlines the R and D projects for medical/welfare equipment techniques, welfare technosystems, promotion of development/commercialization of welfare-related appliances, and information collection/analysis and services. The keynote addresses are given in the panel discussion session; (Entering the aged societies) by Prof. Emeritus Sakurai of Tokyo Women's Medical College, (On diabetes) by Prof. Kawamori of Juntendo University, (On brain diseases) by Prof. Emeritus Tsukada of Keio Gijuku University, (On malign tumors: cancers) by Dr. Moriyama of National Cancer Center's Central Hospital, and (On heat diseases) by Prof. Kusunoki of Tokyo Women's Medical College. Lively discussions are seen in the panel discussion session (Let's consider adult diseases and diseases resulting from living customs), chaired by Mr. Ogawa, head of NEDO's Medical/Welfare Equipment Development Group. (NEDO)

  2. Proceedings of RITE international workshop on valuation; Total eko balance ni kansuru kokusai workshop hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    The RITE International Workshop on Valuation was held in Tokyo and Osaka in February 1996, and eight papers on total ecobalance were reported. In The Field of Impact Assessment, described were constitution and methodology about impact assessment in a wide sense. In LCA Yesterday, Today and Tomorrow, discussed were the historical development and future outlook of LCA. In Standardization of Product Life Cycle Assessment, a survey of the present situation of LCA international standardization was made. In the Relationship between Product Life Cycle Assessment Methodology, considered was the relationship between the goal definition of the product life cycle assessment and the methodological choices. In Valuation in LCA, the present study of LCA was reviewed. Besides, reviews of the LCA study in Japan were made public.

  3. Proceedings of Japan-Germany Workshop of Bioremediation; Nichidoku bio remediation workshop hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-04

    This is a proceedings of Japan-Germany Workshop on Bioremediation held on December 4 and 5, 1995. The keynote lectures include `Environmental preservation using biotechnology` by Prof. Karube of University of Tokyo, and `Environmental technology in Germany: status, achievements, and problems` by Prof. R.D.Schmid of University of Stuttgart. In the oral session, 7 papers are presented in the microbiological aspects of bioremediation, 10 papers in the environmental monitoring, and 6 papers in the engineering aspects of bioremediation. This workshop was sponsored by the German Federal Ministry for Education, Science and Technology, New Energy and Industrial Technology Development Organization, and Research Institute of Innovative Technology for the Earth. According to the lecture by Prof. Karube, key technologies for the environmental preservation include biotechnologies, such as the culture of fine algae with high CO2 concentration resistant properties using a solar light condenser, production of effective substances from CO2, and production of organic fertilizer from the sediments of lakes and sea. 19 refs., 12 figs., 3 tabs.

  4. Fiscal 1997 for the upgrading of the Asia/Pacific coal development. Survey of the optimization of the coal transportation system in Indonesia; 1997 nendo Asia Taiheiyo sekitan kaihatsu kodoka chosa. Indonesia ni okeru sekitan yuso system saitekika chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper summarized the results of Phase 1 and Phase 2 surveys conducted based on `Agreement on the comprehensive survey of a coal transportation system in South Sumatra` concluded between NEDO and the Ministry of Mine and Energy in Indonesia. In addition to the data collection and site surveys made in Phase 1, conducted in Phase 2 were determination of sites for harbors, determination of a scenario on coal transportation from coal mines to harbors, optimization of the coal transportation system, social/economic assessment, and proposal on the optimum transportation system. The results of the simulation were as follows: It is the most advantageous to transport coal from coal deposit area to harbor by rail and from harbor to Paiton by barge weighed over 10,000 tons. Tanjung Api Api is the most advantageous as harbor. The production scale which is profitable became more than 15 million tons. The present coal price of PTBA is $25/t arriving Suralaya. The coal in this case is said to be 5500kcal/kg in quality, and the coal of the same quality to this is only profitable. 8 refs., 68 figs., 104 tabs.

  5. Researches regarding a constructing problem of a PV system. Part 1. Conscious investigation by means of a questionnaire survey; Taiyoko hatsuden system ni okeru kenchikuteki shomondai no kenkyu. 1. Anketo chosa ni yoru ishiki chosa

    Energy Technology Data Exchange (ETDEWEB)

    Nakajima, Y.; Yamazaki, R.; Kuroki, T. [Kogakuin University, Tokyo (Japan)

    1996-10-27

    The installation and introduction of photovoltaic power generation systems (PVS) in buildings are growingly expected in the construction field from now, coupled with the marketing of a solar cell module as a product for a construction material in the form of an external wall or a roof material for example. For this purpose, it is necessary at first to summarize problems that may arise at the time of or after the installation of PVS as a product. This paper examines an opinion poll, degree of recognition, current problems, etc., of PVS as a result of a questionnaire survey given to engineers and architects engaged in the actual construction business. The degree of recognition and interest was very high. Consultation or request for PVS installation was much more than predicted in numbers. Roughly 50% of the respondents reacted positively for the future installation request of PVS and, combined with the respondents who answered to look into the installation tentatively, not less than 90% were of a forward-looking opinion. The 85% of the respondents was not aware of the monitor business system for residential PVS. Further, the survey clearly brought out the importance of cost problems. 1 ref., 11 figs., 3 tabs.

  6. Fiscal 1996 survey report on the environmentally friendly type coal utilization system feasibility study. Survey by region/industry in India; Kankyo chowagata sekitan riyo system kanosei chosa. Indo ni okeru sekitan riyo gaikyo chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    A survey was made in India which is a coal producing/consuming country following China in Asia and where coal is used for about 60% of the primary commercial energy. The survey was conducted on coal production/distribution/utilization and environmental issues, aiming at studying feasibility of introducing the environmentally friendly coal utilization system into every industry including the residential/commercial one, and at implementing a comprehensive master plan including Japan`s international cooperation. Total power source facilities in fiscal 1995 are 83.3 million kW, 64% of which are coal thermal power facilities and generated 260 TWh, 69% of the total output energy. Main commercial energy sources are coal, oil and natural gas, and oil is self-sufficient. The survey this time did not examine very well the actual state of the environmental pollution problem caused by the coal utilization. Indian coal is high in ash content but low in sulfur content, and therefore, SOx polluting air has not been a very important problem so far, but soot/smoke is almost the problem. Further, ash treatment after combustion at boilers, etc. is expected to be a big problem in the future. 49 figs., 88 tabs.

  7. Fiscal 1993 survey of the base arrangement promotion for foreign coal import. Survey of the general situation of Thai coal; 1993 nendo kaigaitan yunyu kiban seibi sokushin chosa. Thai sekitan sogo jijo chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    The paper reported the energy situation in Thailand, the present and future status of coal supply/demand, the present situation of environmental policy and air pollution prevention policy and problems concerning coal and the measures for solution, and a possibility of Japan`s cooperation. In Thailand, the total coal supply amount in 1992 is 16.079 million tons, which is 9.1% of all the primary energy supply amount. The country produces only a few amount of anthracite and subbituminous coal beside brown coal. The domestic coal equals brown coal, the production of which was 15.335 million tons in 1992, 13.9% of all the primary energy demand. Concerning brown coal, 79.7% of all the brown coal supply are for electric power use, and others for industrial use such as the cement industry. The remaining reserve in developed areas is 151.4 billion tons, and the proven reserve in undeveloped areas 756 million tons. The demand for import coal was 11.25 million tons in 1996, and is expected to be 201.73 million tons in 2000. The paper pointed out some problems arising from coal production and spread of coal utilization, and described measures to solve the problems and fields where there are possibilities of Japan`s cooperation. 36 refs., 44 figs., 73 tabs.

  8. Trend survey of the global environment adaptation type industry technology. Chikyu kankyo tekiogata sangyo gijutsu doko chosa. ; Shizen energy ni yoru CO2 global recycle system no kanosei-chosa

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    The paper studies a global CO2 recycling system which combines utilization of natural energy and CO2 recovered from combustion of fossil fuel. In the model, CO2 recovered at the place of energy demand is transported to the place where energy is produced, and from the CO2 fuels are synthesized by use of solar energy and transported to the place of energy demand. Facilities worth a large amount of money are required to transmit electric power generated by the photovoltaic power generation in the desert to the fuel synthesizing plant. Therefore, production of electrolytic hydrogen by the on-site power generation and transport by pipe may be considered. As a synthetic fuel being sent back by ocean transport, methanol is considered, and synthetic methane (LNG) can also be a candidate. CO2 is recovered as liquid carbon dioxide. Possibility of CO2 recycling is dependent on development of the desert solar base, as well as depletion of fossil fuel and price increase, CO2 penalty. It has still been difficult to say which of the fuel synthesis, CO2 tanker or securing of the solar base becomes a bottleneck. Entry of recycling fuels to the market will be possible in proportion to restrictions on fossil fuels, and evaluation of the system depends almost on the rate of energy arriving from the energy-producing region. 112 refs., 70 figs. 36 tabs.

  9. Basic research on promotion of joint implementation. Research on the overseas trend of activities implemented jointly; Kyodo jisshi suishin kiso chosa jigyo. Kyodo jisshi katsudo ni kakawaru kaigai doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The pilot phase of the activities implemented jointly (AIJ) was approved in 1995 in the 1st Conference of the Parties (COPI) of the United Nations Framework Convention on Climate Change to reduce greenhouse gas emission. In order to promote the AIJ Japan program smoothly, some practical examples in every preceding country and the situations and demands of Asian countries were researched. It was confirmed that since larger cost-effectiveness is achieved just in countries lower in emission control cost, AIJ can enhance the cost-effectiveness and promote environmental technology transfer. Japanese government had studied establishment of the framework for AIJ, and decided the basic framework of the AIJ Japan program in 1995. The government also approved the evaluation guidelines of this program which include confirmed and considered matters necessary for government offices related to this program to evaluate and approve each project.

  10. Rock magnetic survey of Himalaya-Karakoram ranges, northern Pakistan; Pakistan hokubu, Himalaya-Karakoram tai no ganseki jikigakuteki chosa

    Energy Technology Data Exchange (ETDEWEB)

    Yoshida, M. [Geoscience Co. Ltd., Tokyo (Japan); Khadim, I.; Ahmad, M. [Geological Survey of Pakistan, Islamabad (Pakistan)

    1997-10-22

    This paper describes results of the rock magnetic survey mainly including measurement of magnetic susceptibility conducted in the northern Pakistan from 1992 to 1997. Magnetic characteristics in Himalaya-Karakoram ranges and prospective ore deposits are also described. Magnetic susceptibility data measured in this district were summarized as a frequency map in each geological block. Granitoids in the northern part of Kohistan batholith and granitoids of Ladakh batholith showed remarkably high magnetic susceptibility values, which suggested they are magnetite-series magmatism. It has been known that magnetite-series magmatism often accompanies sulfide-forming mineral resources, which suggests high potentiality of abundant mineral resources containing Mo, Cu, Pb, Zn, Ag and Au. From the results of the magnetic susceptibility measurements and the above-mentioned models, accordingly, it can be pointed out that the northern part of Kohistan batholith, the distribution area of Ladakh batholith, and surrounding areas are promising targets for mineral resources exploration in the Himalaya-Karakoram ranges, northern Pakistan. 5 refs., 3 figs.

  11. Exploratory boring in Japan. ; Its history and recent topics. Chishitsu chosa boring. ; Sono rekishi to saikin no gijutsu no doko

    Energy Technology Data Exchange (ETDEWEB)

    Koike, Y. (Oyo Corp., Tokyo (Japan)); Hosaka, M.

    1993-09-01

    This paper introduces latest trends in exploratory boring technologies. The freeze sampling method freezes ground beds consisting of sand, gravels, and Shirasu in the locations where they are, and samples good-quality samples without disturbances. The air bubble boring method injects a surfactant into compressed air, and utilizes foamed surfactant as a drilling fluid, the method being capable of sampling good-quality cores even from gravel and soft rock beds. The rotary sounding method estimates ground bed strength from drilling resistance generated at a tip bit during boring. The method provides high correlation of drilling velocity, rotation speed, and thrust with uniaxial compression strength. A spar-buoy boring scaffold has been developed for scaffolding in off-shore boring. This scaffold keeps its upright position by drawing a buoyant body into water to have the buoyancy work as vertically upward tension. The scaffold makes safe works possible even under a condition of water depth greater than 15 m and tidal current of 2 knots or faster. 15 refs., 8 figs.

  12. Investigation into introduction and promotion of clean energy cars; Clean energy jidosha no donyu sokushin ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Gazing the introduction target for fiscal 2000 and 2010, the paper arranged comprehensively and systematically the trend in Japan and overseas of clean energy cars and described subjects. Themes of the study to be promoted in terms of electric cars are: Li secondary batteries, heightening of performance of batteries such as Ni-hydrogen, power generation/power storage hybridization to make the long-distance travel possible. For the price reduction, the body is so made as to make it possible to select three kinds of power unit, that is, gasoline, hybrid, and electricity. Low noise and easy operation are also important. As to natural gas vehicles, the price is more than three times as high as that of gasoline vehicles, and relaxation of the related regulations on metal tanks, the Road Traffic Act, etc. is necessary. It is indispensable to establish quantity production and technical standards and reduce cost by the remodeling for bi-fueling with gasoline engines, development of FRP tanks, etc. Methanol vehicles are the closest to gasoline vehicles, but the introduction is delayed having no groups for generalization. Solar and hydrogen cars are promising, but are on a stage of developing the basic technology. 43 figs., 104 tabs.

  13. Water quality and water pollution sources in Poyang lake, China; Poyang ko ni okeru suishitsu chosa to odakugen kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    Ito, M. [Shin-Nippon Meteorological and Oceanographical Consultant Co. Ltd., Tokyo (Japan)

    1996-01-10

    This paper summarizes the current status of water quality and pollution sources in Poyang Lake in China. The lake is located in Chianghsi Province of China, and a largest fresh water lake in China that flows out into the Yangtze river. The basin is surrounded by mountains on three sides and faces the Yangtze on one side, whereas the plains formed by the lake and the rivers flowing in extends in the center of the basin. The plains around the lake has the city of Nanchang, the capital of the province, the city of Jiujiang (both cities have a population of about 4 million, respectively), and four other cities with a size of one million people including Jingdezhen. Water supply system in the basin is used in a 37% area of the urban areas, and no sewage facilities of whatsoever are available as of 1991. The lake has COD of about 3 mg{times}1/l. No severe pollution by organic matters is seen. While the T-P concentration is at a high level, PO4-P is low. Majority of phosphorus flowing into the basin exists in the form trapped in soil particles. In order to maintain the current water quality in the future, waste water treatment is required in the basin. Construction of an oxidation pond in the vast land exposed during the drought period is a measure that can be tackled relatively easily. 1 fig., 4 tabs.

  14. Investigational research on highly functional carbon and related materials (HF-CRMs); Tansokei kokino zairyo no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper arranged a fiscal 1997 guiding study of highly functional carbon and related materials (HF-CRMs). In the material invention field, described were the composition by interatomic control technology and the characteristics of pure carbon nanotubes, carbynes, graphite, fullerene polymer, porous carbon, etc. Heteroelement substituted materials were also described. The paper also reported the application of HF-CRMs to the electric/chemical field, and arranged the basement technology and applicability of diamond in particular. The subjects are enhancement of composition technology and reduction of the price of processing technology. Especially, the control of impurities and defects is a must for the electric use. The application of HF-CRMs to the mechanical field was reported. Superlubricant, wear resistant and high temperature corrosion resistant materials were taken up, and were surveyed in terms of their use mostly to refuse incineration power generation boilers, and thermal power generation use turbines. In the development of mechanical materials, technologies were surveyed especially for large area/complex shape film formation to form films for various parts, functionally gradient film formation for relaxation of thermal stress and residual stress in the film, and high speed film formation for quantity production. 363 refs., 88 figs., 10 tabs.

  15. Feasibility study on introducing new energy systems into Asian villages; Asia sonraku ni okeru shin energy donyu kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For improvement of living standards in unelectrified areas of Asia, the feasibility of new energy power generation systems was surveyed. The degree of electrification of local areas is different every country, and Thailand is ahead of other countries, while Laos and Cambodia are most unelectrified. Power supply of 100W/house seems to be adequate for local areas because of weather condition, housing situation and life-style. Economic support and education on electricity are necessary for poor areas. Although needs for new energy is increasing, the priority is given to industrial and urbanized areas because of cost and investment effects, and remote areas are dependent on grant- in-aid. Resources of photovoltaic, wind power and micro- hydraulic energies are abundant, however, selection of energy and verification of its usability are important, and the local energy density maps were thus prepared. In introduction of new energy, after selection of energy suitable for an area concerned, such geographical and social conditions should be surveyed as road condition, water rights, land utilization, economic support system, policy and intention of inhabitants. 76 refs., 68 figs., 91 tabs.

  16. Application of VSP to geological investigation; P ha oyobi S ha VSP wo mochiita shinso chishitsu chosa

    Energy Technology Data Exchange (ETDEWEB)

    Kinugasa, Y. [Geological Survey of Japan, Tsukuba (Japan); Feng, S.; Sugiyama, T.; Ishikawa, K. [Chuoh Kaihatsu Corp., Tokyo (Japan)

    1997-05-27

    Discussed in this paper are the P-wave and S-wave zero-offset VSPs carried out utilizing boreholes located in Nada Ward, Kobe City, and Hokudan-cho, Hyogo Prefecture, as part of the deep layer boring survey following Hanshin Earthquake Disaster. This effort aims at the elucidation of P-wave and S-wave velocity structures, high-precision identification of data obtained by the surface reflection method, and collection of basic data for active faults investigation in the future. Among the velocity structures obtained for various layers, the S-wave velocity structures in particular agree with the stratigraphy excellently and may be utilized in seismic analyses to be conducted in the future. Reflection from geological boundaries is received with precision, providing accurate information about correlation between reflection and geological cross sections. The records will be useful in formulating plans for reflection surveys for instance of the boundary between the Osaka group and Kobe group. Generally speaking, reflection coefficients are large when the reflection is from a boundary where difference is great in elastic wave impedance (mainly difference in velocity). In the case of the boundary between the Kobe group and granite in Awaji Island, however, no strong reflection is found despite the great difference in velocity. This is attributed to the complicated, sharp inclination of the basement rock and to its weathering. 4 refs., 8 figs.

  17. Investigation on development of advanced materials by solvothermal technique; Sorubo thermal hanno riyo senshin zairyo kaihatsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Solvothermal reaction is reaction under high temperature and high pressure, which is expected to fabricate new functional materials. In this study, the materials are classified into two fields, i.e., inorganic materials, metals and their composites and organic materials and their composites. The current status of R and D of production and processing technology in each field is surveyed and the prospect of it is discussed. For the inorganic materials, metals and their composites, it is explained that very fine metal oxide particles, complex oxides, single crystals, whiskers, compounds with layer structure, metastable compounds, ion conductors and catalysts with high ability could be produced only by controlling the solvothermal reactions in atomic order. For the organic materials and their composites, surveyed results of the solvothermal technique using non-aqueous solutions are mainly provided. The necessity of a national project for researches on the solvothermal reactions is proposed from the viewpoint of resource, environment and energy. 777 refs., 38 figs., 26 tabs.

  18. Technologies and techniques for analysis and use of genome information, 1997; Genome joho kaidoku riyo gijutsu no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper clarified the whole image of cell functions by elucidating the function and manifestation control mechanism of genes existing in genomes, and the network of their interactions, and surveyed applicability of the useful functions obtained of cells and proteins to the industrial field. The survey was made from a viewpoint of the fields of both biology and information science. Especially, based on the function-known DNA base sequence database, the following technologies were surveyed: technology to predict the function of the function-unknown DNA base sequence, search/separation technology to acquire the genes to be functionally elucidated in a state of being suitable for manifestation, technology to get perfect proteins by effectively manifesting the genes to be functionally elucidated, and technology to analyze the function of the proteins obtained by manifestation of genes. Further, the International Symposium was held which is titled `Genome Research Opens a New World to Bioindustry (New Developments in Genome Informatics Technologies). With the future progress of technology to decipher and use genome information, the construction of much newer genome industry is anticipated. 165 refs., 44 figs., 10 tabs.

  19. Sea bottom gravity survey of Osaka bay and its study; Osakawan kaitei juryoku chosa to sono kosatsu

    Energy Technology Data Exchange (ETDEWEB)

    Komazawa, M. [Geological Survey of Japan, Tsukuba (Japan); Ota, Y.; Shibuya, S.; Kumai, M.; Murakami, M. [Japex Geoscience Institute, Inc., Tokyo (Japan)

    1996-05-01

    This paper reports a sea bottom gravity survey conducted with an objective to identify deep underground structure in the vicinity of the epicenter of the Hyogoken-Nanbu Earthquake. The surveyed areas are the whole Osaka Bay area north of the north latitude of 34 degrees and 20 minutes, and the eastern part of the Sea of Harima east of the east longitude of 134 degrees and 40 minutes, excluding the areas difficult of performing measurements. A square lattice with sides each about 2 km was arranged with 408 measurement points. The measurement was carried out by using an observation vessel mounted with a sea bottom gravimeter made by LaCoste and Romberg Corporation, which was lowered down to the sea bottom at the measurement points. Errors in positions and water depths at the gravity measuring points were suppressed to less than 0.002 minutes and 0.1 m, respectively. The measurement data were given necessary corrections by using a unified method applicable also to land areas, and a Bouguer anomaly chart was prepared. Based on the chart, this paper summarizes features in the Bouguer anomaly in the surveyed areas (such as the low-gravity anomaly band extending the central part of the Osaka bay from north-east to south-west, and the gradient structure existing on the Awaji island side). 6 refs., 1 fig.

  20. 1000m depth boring at Inagawa, Hyogo prefecture. 1. Overviews; Hyogoken Inagawamachi ni okeru 1000m boring chosa. 1. Gaiyo

    Energy Technology Data Exchange (ETDEWEB)

    Sato, T.; Kusunose, K.; Cho, A.; Tosha, T. [Geological Survey of Japan, Tsukuba (Japan); Kiyama, T.; Yamada, F. [Mitsui Construction Co. Ltd., Tokyo (Japan); Aizawa, T. [Sancoh Consultants Co. Ltd., Tokyo (Japan)

    1996-05-01

    Various field experiments were carried out using a 1000m deep borehole at Inagawa town, about 10km north of the focus of the Hanshin-Awaji Great Earthquake and directly above the area where shallow earthquake activities have intermittently occurred. These experiments included stress measurement by hydraulic fracturing, hydrophone-aided VSP, permeability tests and observation of various types of logging. The laboratory experiments were also carried out, including measurement of various properties and stresses of the core samples. The stress-depth relationship, determined by the hydraulic fracturing method, shows that the stress gradient well coincides with the Western Japan standard at a depth up to 700m, whereas it is approximately twice as high as the standard at a depth of 946m, at which core disking and borehole break-out are clearly observed, and hence stresses conceivably concentrate locally. Orientation of the maximum horizontal compressive stress is E-W at a depth of around 600m, but greatly changes to NNW-SSE at a deeper position. 4 refs., 5 figs.

  1. Survey on bio-chemical complex harmonized with global environment. 3; Kankyo chowagata seibutsu kagaku konbinato ni kansuru chosa. 3

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    A survey was conducted of bio-chemical complex harmonized with the global environment for the purpose of constructing the material production process harmonized with the environment by the process fusion between biological conversion and chemical reaction. Palm oil was taken up as renewable raw material plant resource. The process utilizing bio-chemical reaction advances at normal temperature and pressure and is high in reaction specificity and selectivity. This is a recycling, circulation and environmental harmony type production technology which brings high yield, energy conservation, resource conservation, and low environmental loads. Waste water treatment and production of useful substances from sludge were thought as elementary technology. A possibility was studied of enzyme production by culturing solid waste, and the enzyme was applied to the hydrolysis process. The paper indicated trace components in the palm oil and the extraction method and proposed the production process of new derivatives for adding value to hydrolysate. A study was also made of the overall process flow which integrated these new processes and the material balance. The comprehensive evaluation of this new process was made from the aspect of the product structure, the market, construction cost, economical efficiency, and the environment. 133 refs., 65 figs., 56 tabs.

  2. Researches and studies about technological trend of `functionally gradient materials`; Keisha kino zairyo no gijutsu doko ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Morishima, H. [Information Center of Exploitation of Petroleum, Tokyo (Japan)

    1995-09-01

    Introduced herein is a summary of the technological research report about functionally gradient materials that was presented by Information Center of Exploration of Petroleum in fiscal 1994. The functionally gradient material was realized in the 1980s thanks to more than 30 technologies industrial or government sector bodies interested in science and technology, which effort was related to Japan`s recoverable manned spaceplane program. The material, equipped with the high thermal conductivity and mechanical strength required of a material to cover the spaceplane body, was born out of a innovative idea in which the constitution, etc., of two different materials should continuously change for the elimination of any boundary between the two now that a direct bondage of a metal and ceramics would after all experience separation or cracking. The new idea enabled a plurality of desired functions to be freely distributed within the material, creating hopes in various fields. It has been found that probabilities are high that the functionally gradient material will improve at a surprising rate the conversion rate in utilizing thermoelectricity, photoelectricity, or nuclear energy. In the oil industry, studies are under way to use the new material in petroleum exploration, etc., that have to be undertaken under severe conditions. 1 ref., 2 figs., 2 tabs.

  3. Research study on analysis/use technologies of genome information; Genome joho kaidoku riyo gijutsu no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For wide use of genome information in the industrial field, the required R and D was surveyed from the standpoints of biology and information science. To clarify the present state and issues of the international research on genome analysis, the genome map as well as sequence and function information are first surveyed. The current analysis/use technologies of genome information are analyzed, and the following are summarized: prediction and identification of gene regions in genome sequences, techniques for searching and selecting useful genes, and techniques for predicting the expression of gene functions and the gene-product structure and functions. It is recommended that R and D and data collection/interpretation necessary to clarify inter-gene interactions and information networks should be promoted by integrating Japanese advanced know-how and technologies. As examples of the impact of the research results on industry and society, the present state and future expected effect are summarized for medicines, diagnosis/analysis instruments, chemicals, foods, agriculture, fishery, animal husbandry, electronics, environment and information. 278 refs., 42 figs., 5 tabs.

  4. Research on elaboration of the evaluation guidelines for activities implemented jointly; Kyodo jisshi katsudo hyoka guide line sakutei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Elaboration of the evaluation guidelines for activities implemented jointly (AIJ) was researched to prevent the earth from warming. AIJ is the means to globally promote countermeasures against global warming cost-effectively by optimally combining every country`s technology, know-how and fund. AIJ was established in the 1st Conference of the Parties (COPI) of the United Nations Framework Convention on Climate Change in March, 1995. The pilot phase of AIJ is first carried out by voluntary workers jointly with developing countries under the agreement of the parties. The current situation of activities is reported in COPI as materials for evaluation of AIJ. To promote AIJ, elaboration of the evaluation guidelines for AIJ Japan program is also necessary for Japan. This research arranged the contents of the evaluation guidelines and the method of classifying projects for AIJ Japan program, and carried out some case studies of promising projects to reduce greenhouse gas emission for future proposal. 3 figs., 31 tabs.

  5. Feasibility survey of thermoelectric conversion technology using semiconductors; Handotai wo riyoshita netsuden henkan gijutsu no kanosei ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    1993-03-15

    The paper takes notice to thermoelectric conversion technology using semiconductors and investigates it in a wide range from high temperature to low temperature to study its feasibility. It is found that in Bi-Te alloy elements applicable to a temperature range of around 200{degree}C, some are over 3.5{times}10{sup -3}K{sup -1} in performance index, and performance of the element can be practically improved in the near future. The thermoelectric power generation system using waste heat from the fuel cell power plant, which is 5-6% in conversion efficiency, can generate output more than 100kW and is expected to improve by approximately 1% in plant overall efficiency. The construction cost, however, is around 1.6-1.9 million yen/kW. The thermoelectric power generation plant which is modeled on No.2 generator of Hatchobaru geothermal power plant can generate electric output of 10-12.5MW, which is smaller than that of the conventional geothermal power generation. The construction cost is around 3.2-4.1 million yen/kW. Even if advantage of the system in running cost is considered, attractive systematization seems to be difficult. 88 refs., 81 figs., 17 tabs.

  6. Investigations on international standardization of environmental management systems. 3; Kankyo kanri system no kokusai hyojunka ni kansuru chosa. 3

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Japan as an ISO member country identifies the state of discussions in the environmental management standard deliberation committee at ISO. Investigations were performed on international standardization of environmental management systems for the purpose of participating and cooperating in preparing and establishing international standards related to environmental management, and playing part in working, solving and improving environmental problems. Under the circumstances that environmental problems are drawing worldwide interest, the International Organization for Standardization (ISO) has been carrying out since 1993 deliberations on environmental management standards to institutionalize environmental management rules to check effects of business activities on the environment. The International Organization for Standardization/Environmental Management Technical Committee (ISO/TC207) was installed, at which series number of 1400 order was allotted for environmental management related standards, and major standards have come to a final stage of standard formulation at the TC207 Oslo conference in June 1995. In Japan, the Ministry of International Trade and Industry has established an environmental management standard deliberation committee composed of people of experience or academic standing to advance discussions on how the environmental management should be in business entities through deliberations on ISO standards.

  7. Research on environmental bioecosensing technology using ecological information; Seitaikei joho ni yoru kankyo bio eco sensing gijutsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The bioecosensing technology was studied which detects and identifies feeble signals generated by biosystem communication in wide biological environment. The following were reported as current notable environmental biosensing technologies: a quick measurement method of environmental contaminants using immunological measurement method, analysis method of ecological state of microorganism using DNA probes, observation of ecosystem by bioluminescent system, measurement method of environmental changes and contaminants using higher animals and plants, and detection method of chemical contaminants using chemotaxis of microorganism. As a result, the new bioecosensing/monitoring technology in molecular level was suggested for identifying comprehensive environmental changes which could not be measured by previous physical and chemical methods, as changes in ecosystem corresponding to environmental changes. As the wide area remote sensing technology of environmental ecological information, sensing technology on the earth, aircraft and satellite was also discussed. 247 refs., 55 figs., 17 tabs.

  8. Survey of regulations accompanied with isolation technology of carbon dioxide; Nisanka tanso no kakuri gijutsu ni tomonau hokisei no chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Regulations, conventions and agreements relating to the discharging liquefied carbon dioxide (CO2) into the bathypelagic zone from a cruising ships are investigated. The ocean storage of CO2 is not specifically prohibited by law, but must be regulated on a global scale because such treatment may impact the marine environment. In principle, treatment with impact on the nature is prohibited. Laws of environmental conservation are completed in European, Asian, and Pacific countries, which join international conventions and committees with high interests. It is suggested that the engineering technique of the storage should be improved to observe regulations and that an impact assessment for the ocean storage should be carefully conducted in full understanding of the basic premise of the regulatory systems or organizations. Furthermore, it is significant to study on the possible effect of the ocean storage of CO2 on global warming and life-cycle assessment inventory analysis, namely the balance of the energy budget between the separation and the ocean storage of CO2. 23 refs., 7 figs., 6 tabs.

  9. Indoor environment and allergy except housedust mite; Jukankyo to allergy ni kansuru dani igai no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Nakao, F.; Nishima, S.

    1998-05-31

    Pathopoiesis factors of allergic diseases include immune antibody productivity sthenia reacting with antigens such as mite or the like in allergy reaction which is regarded as based on genetic fact (atopic diathesis), and environmental factors as external factors. The environmental factors are further classified into specific factors (antigens) and nonspecific factors. The former factors include the indoor factors such as mite, mould, animals bred indoor, etc., and outdoor factors such as pollen and so on. The latter factors include indoor factors such as passive smoking, carbon monoxide, nitrogen oxides, formaldehyde, etc., and outdoor factors such as sulfur oxides, nitrogen oxides, airborne particles and so on. In this paper, the environmental factors in relation to allergic diseases expect mite are introduced. Besides mould, cockroach/insect, fur dust and dandruff of animals, adjustment of room temperature/humidity, smoking, indoor and outdoor air pollution are mentioned as the environmental factors expect mite, and the cause-effect relations thereof are explained. 24 refs., 3 figs., 7 tabs.

  10. Research trend survey on the stable isotope utilization technology; Antei doitai no riyo gijutsu ni kansuru kenkyu doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This report reviews the activities and the trends in the area of the stable isotope use attracting attention recently. In the medicine and clinical treatment sector, the remarkable trends are the extension of {sup 13}C use. The breath test and the magnetic resonance spectroscopy (MRS) diagnosis have been developed as inspection methods. It is noted that investigation has been initiated on the magnetic resonance imaging (MRI) using {sup 3}He and {sup 129}Xe for the lung imaging. In the organic chemistry and biochemistry sector, the stable isotopes are used for analyzing the structures of complicated natural compounds and materials relating to life science and for analyzing the chemical reaction mechanism of organic compounds. In the nuclear energy sector, {sup 10}B and {sup 7}Li have been used as neutron absorption materials and pH neutralizing reagent, respectively. In the analysis and measurement sector, the process of isotopic dilution is used for the environmental analysis of trace elements including harmful substances. Among various separation methods of isotopes, well studied uranium enrichment processes and deuterium separation processes are described. Separation of {sup 15}N by ion exchange resin method and plasma ion cyclotron resonance (ICR) isotope separation have been studied, recently. 133 refs., 53 figs., 7 tabs.

  11. Fiscal 1996 survey of the base arrangement promotion for foreign coal import. Model survey for promotion of advanced coal utilization (survey of a model project to convert sludge into fuel by low grade coal); 1996 nendo kaigaitan yunyu kiban seibi sokushin chosa. Sekitan kodo riyo sokushin model chosa (teihin`itan ni yoru odei nenryoka model jigyo chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The paper made an investigation in the Tohoku district, mainly in Akita prefecture, into whether or not a technology of recycling sewage sludge using pulverized coal will be successful as business. Akita prefecture comparatively generates a little sewage sludge and secures reclaimed land for disposal, and is not in a situation where any immediate measures for disposal of sewage sludge should be taken. However, in Akita, there are clearly seen the attitude toward craving the effective use of sewage sludge and great interest in the pulverized coal law. Upon commercializing, the trially calculated yield was approximately 7%. The economical efficiency of the pulverized coal law is much dependent upon the coal price, but the coal having special specifications is not needed. Therefore, it is possible to select it from among overseas lignite, brown coal, etc. from viewpoints of the price and stable supply. The evaluation of the sludge fuel produced is an important factor for successful recycling. As to the quantity of chlorine contained in coal, particularly, strong measures for it should be taken since chlorine is related with the corrosion problem of incinerating facilities and finally with the quality control of cement to be recycled. 36 figs., 50 tabs.

  12. Trend survey of the global environment adaptation type industrial technology. Trend survey of global environment related studies (researches on measureds for reduction of environmental load of CO2); Chikyu kankyo tekiogata sangyo gijutsu doko chosa. Chikyu kankyo kanren kenkyu doko no chosa (nisanka tanso no kankyo fuka teigensaku ni kansuru chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    The paper studies the measures for reduction of environmental load of CO2 from the standpoint of chemical technology. As for methanol synthesis from CO2, accelerating of the reaction using Cu base compound catalyst is reported. Also, CO2 is methanated at high speed by low temperature waste heat using Ni-La2O3-Ru catalyst. Discussions are given on the subject for development of catalyst reaction relating to hydrogen production technology by methane reforming reaction using steam or CO2. Synthesis of polymetric materials by use of CO2 is also described. The paper mentions that it is indispensable to design high-function electrode and elucidate the reaction mechanism of electrochemical CO2 reduction for electrochemical and photochemical CO2 reduction measures. Moreover, in case of using solar energy, it is required to study photovoltaic excitation process in semiconductor electrode/ electrolyte solution interface. For production of hydrogen from CO2 by photosynthetic organisms and solar energy, the problem is control of inhibiting effect of oxygen combinedly produced. Described are production of polyhydroxy butyric acid and biodegradable polymer from CO2 and hydrogen by bacteria, and CO2 fixation imitating the enzyme reaction. 267 refs., 79 figs., 32 tabs.

  13. Achievement report for fiscal 1998. Total wheelchair support system; 1998 nendo seika hokokusho. Kurumaisu sogo shien system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    Development has been made on the element technologies for a total wheelchair support system. In the research of a manually operated wheelchair support system, the formula support system was verified of its operation, and its completion as a system that can be used practically. In the study on motorized wheelchairs, a questionnaire was given on disorders, remaining functions and environment in which the wheelchairs would be used to select the most suitable formula from among 14 types of basic wheelchairs. After having adjusted the seat and operation lever positions for optimization by using a specific wheelchair for measurement, the power was so outputted that image illustrations after values have been inputted can be checked on the screen. In studying a travel support system, based on the fact that anomaly has occurred in operation of the boarding and alighting device during a test by a third party laboratory, a review was given on the capacity of the device. As a result of changing the motor to the one higher by one rank, the required time was decreased by 25%. In addition, the boarding direction was limited to one direction, and the reverse speed was changed and improved to 60% of the forward speed. In developing the total system, studies were made on methods of binding, and methods of protecting surrounding environment. (NEDO)

  14. Fiscal 2000 achievement report. Welfare technosystem research and development (Kamogawa); 2000 nendo welfare technosystem kenkyu kaihatsu (Kamogawa) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of assisting in-home medical care, a system to enable in-home acquisition, compression, accumulation, distribution, and regeneration of auscultatory sounds (cardiac sound, respiratory sound) is added to telemedicine assisting system technologies for remotely located doctors' decisions and instructions for in-home medical care. In fiscal 2000, for improvement on the already-developed system, operationality was improved, uptake was realized of still images (digital camera pictures) mainly for diseases in dematology where such is strongly demanded, and a transmitter function was augmented. The system enables the PHS (personal handyphone system) aided exchange of medical data between portable terminals on patrol and (doctors') personal computers through the personal computer server in the hospital. Doctors are able to administer remote telemedicine now that biomimetic information on remotely located patients such as still medical images and auscultatory sounds necessary for diagnosing is available in the hospital. (NEDO)

  15. Study mission report on geothermal development in America and Hawaii. 4. Geysers geothermal area; America Hawaii chinetsu chosadan hokokusho. Geysers

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-15

    The Geysers Known Geothermal Resource is steam predominant type having the largest capacity in the world. The power generating capacity has reached 2,000 MW in 1989, and is currently 1,812 MW due to the rejection of old facilities. The operation in 1995 was 1,155 MW. This area is in the complex of sedimentary rocks and igneous rocks relating to the plate sinking. The average depth of geothermal reservoir is around 2,500 m. The aerated drilling and multiple leg drilling are employed for drilling. For the former, compressed air is injected in the circulated drilling mud. Suitable drilling mud to the depth and lost circulation can be supplied by controlling the apparent specific gravity of drilling mud. For the latter, two or three secondary legs without cement casings are drilled like a fork against the fault fracture zones producing steam. The condensate is sent to the H2S treatment system and ClO2 system, and H2S in the noncondensable gas is removed by the Stretford Abatement System. Concentrates of arsenic and mercury are below the regulated values. 7 refs., 21 figs., 1 tab.

  16. Fiscal 2000 achievement report. Welfare technosystem research and development (Niihama); 2000 nendo walfare technosystem kenkyu kaihatsu (Niihama) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Efforts are made to develop welfare equipment systems for helping people needing care lead an independent life. In collecting data on the transfer of patients and carrying out research and development in this connection, activities are conducted to develop (1) a transfer wheelchair and a transfer aiding wheelchair, (2) a simplified transfer type toilet, and (3) a tilt mechanism installable on a standard wheelchair. Under item (1), a wheelchair and an auxiliary wheelchair enabling the transfer of a person who cannot move without help between a wheelchair and an automobile are experimentally built. Under item (2), a simplified transfer type toilet to which a single attendant can easily guide the patient from the bed is developed. Under item (3), a tilt mechanism is developed, installable on a wheelchair to recline the same for the aged person to assume a comfortable attitude. In the development of a portable character reading device, a finger tip reader was experimentally manufactured for reading Japanese characters. (NEDO)

  17. Fiscal 2000 achievement report. Welfare technosystem research and development (Akita); 2000 nendo welfare technosystem kenkyu kaihatsu (Akita) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Efforts continue to develop residential circumstance improving technologies and welfare/nursing devices and utensils for helping people who are in need of nursing care or are handicapped in snowy cold regions. In fiscal 2000, research and development activities were conducted in the six fields of (1) a bedclothes drying system for achieving comfort by an easy operation, (2) energy efficient snow melting device to facilitate outings in snow, (3) wooden bathtub making use of wood working technologies, (4) simplified module chair kind to old people, (5) caster walker reflecting the walker's state, and (6) chair type skis allowing beginners with disabled legs to enjoy skiing. In field (2), a solar heat aided snow melting device comprising a heat pipe and an underground heat storage was installed in a building site. In field (5), to realize a walker which is able to automatically adjust frunctions according to features of each of users, the wheel braking force was made to change according to the walker's walking conditions. (NEDO)

  18. Fiscal 2000 achievement report. Welfare technosystem research and development (Chofu); 2000 nendo welfare technosystem kenkyu kaihatsu (Chofu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Research and development efforts are exerted to realize (1) a variable function residential circumstance system for the aged people and (2) a medical welfare and life assisting information system for helping the aged or handicapped people lead an independent life. Under item (1), a variable function residential circumstance system under which functions of the residence may be changed dependent upon inhabitants' degree of debility will be developed, and an information system will be developed under which medical welfare assistance and life assistance are integrated. Under item (2), residences, welfare appliances, and nurse/attendant assisting systems will be assessed and examined. In fiscal 2000, under item (1), a variable function residential unit was fabricated and was inhabited experimentally by people approximately 1 to 4 in the degree of need for nursing care, and problems were isolated to be discussed toward putting the system to practical use. Under item (2), physical power required for nursing and attending was measured using medical assistance appliances for in-home nursing care installed at Welfare Technohouse Chofu, and ergonomic studies were conducted with a view to relieving the load to be imposed upon those engaged in the nursing and attending work. (NEDO)

  19. Fiscal 2000 achievement report. Welfare technosystem research and development (Ube); 2000 nendo walfare technosystem kenkyu kaihatsu (Ube) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Efforts continue to develop welfare nursing equipment for helping persons in need of nursing care or handicapped persons who live an independent life. Efforts are exerted in three fields for developing (1) a motor driven wheelchair in which the occupant feels as if driving a car, (2) an online cardiac function monitoring system using a cardiac sound sensor, (3) an automatic pressure belt for patients of postural low blood pressure, (4) and a seated position aiding and stabilizing device for workers with legs not fully useful. In field (1), the steering wheel, brake, and driving system are contrived so that the occupant may easily drive the wheelchair as if in an automobile driver's seat. In field (2), a device is developed to monitor and examine the heart rate and respiration rate, for which a cardiac sensor has to be installed on the water bed or an air mattress. In field (3), a computer controlled automatic pressure belt is developed for patients of myelopathy or cerebrovascular disease. In field (4), a work assisting device is developed to help seated workers with leg troubles. (NEDO)

  20. Achievement report for fiscal 1998. Home rehabilitation system for aphasia patients; 1998 nendo seika hokokusho. Shitsugosho zaitaku rehabilitation shien system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    Development has been made on the element technologies for a home rehabilitation system for aphasia patients. First, studies were performed on an authoring procedure for aphasia patient training, and partial trial production and development were carried out on an authoring system for the training program formula. Then, studies were executed on a training simulation and analysis filter, and partial trial production and development were implemented on a home rehabilitation supporting and self-teaching system. Next, an input and output mechanism for voice signal processing was studied, and aphasia patient and caregiver human interface was partially fabricated on a trial basis. In addition, a remote rehabilitation communicating method was researched, and partial trial production was carried out on a remote rehabilitation evaluation and diagnosis support means. Finally, communication assisting means were researched, and a communication assisting system was partially produced on a trial basis. Good evaluation results were given on a demonstration system. Although partial indications were given on minute parts, practical agreement was obtained as a whole. Great expectation was given particularly on the remote rehabilitation system and the authoring system. (NEDO)

  1. Achievement report for fiscal 1998. Multimedia system for the disabled; 1998 nendo seika hokokusho. Shogaisha taio multimedia system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    Development has been made on the element technologies for a multimedia system for the disabled. In developing the non-visual graphical user interface (GUI) access system, a non-visual access system to enable the visually disabled to access a GUI system by utilizing sound and tactile devices was developed. In developing the three-dimensional sound utilizing information providing system, a system was developed, in which information on screen arrangement of the GUI in a personal computer is presented as spatial sound positions by using the three-dimensional sound control technology. The system can be operated non-visually using a mouse by controlling movements of a cursor. The current fiscal year has improved three-dimensional sound producing devices, three-dimensional sound interface, and how to handle their applications. User evaluations were also performed. Functions were expanded and improved in a system and an optical media reader that enable the visually disabled person to read printed papers by himself. Development was made also on a function to link the system with a total system. (NEDO)

  2. International Workshop on Carbon Cycling and Coral Reef Metabolism; Sangosho no tanso junkan ni kansuru kokusai workshop hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-16

    The paper described the International Workshop on Carbon Cycling and Coral Reef Metabolism which was held at Miyako-jima, Okinawa Pref. on October 17-24, 1995. In the workshop, researchers got together which are involved in marine chemistry, marine biology, coral ecology, and environmental science, and discussed the carbon cycling and metabolism of coral reef. Discussions were made on what the coral reef ecosystem is, and what the definition of a sink or a source for CO2 is. Also discussed were scales of how much time and space should be considered to make these issues clear. Further, it was proposed that it was necessary to investigate carbon balance of both the whole system and the components of the system and to keep track of mass transfer among neighboring components of the system. Seventeen presentations were given. The workshop obtained a definite consensus on carbon balance of the coral reef system. 123 refs., 39 figs., 9 tabs.

  3. Summary report of the overseas researcher invitation program in FY1996; 1996 nendo kaigai kenkyusha shohei jigyo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    To exchange research information, Mr. Koernaen Inif was invited from the Ministry of Industry and Commerce, Indonesia in the period between 4th November in 1996 and 4th February in 1997 as a part of the overseas researcher invitation program in FY 1996. The research theme is `Investigation of low cost removal method of COD and BOD from industrial waste water: Biodegradation of lignin in the waste water from pulp industry using anaerobic bacteria.` The institute of the invited researcher has promoted investigations for improving water quality of the Surabaya River. The largest reason of the water quality pollution of the Surabaya River is caused by the waste water from paper and pulp industry, and pollutants are COD and BOD. In major factories with economic margins, waste water treatments have been conducted, which do not satisfy the waste water standard of factories. In this investigation, the treatment technology information of industrial waste water were collected. The information were summarized for contributing to the future research and development in Surabaya. The objective was to obtain the biodegradation techniques of lignin using anaerobic bacteria. 51 refs., 7 figs., 5 tabs.

  4. Workshop on APEC virtual center for environmental technology exchange; APEC kankyo gijutsu koryu virtual center workshop hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    At the 'policy maker workshop of the virtual center of APEC technology exchange' held in November 1997 in Osaka, Japan, it was agreed to organize study groups to discuss the scope of information provided by the virtual center, and to make common the classification systems and retrieval functions. In addition, the necessity was confirmed on international cooperation to promote establishment of virtual centers in different countries and territories. On the first day, Professor Ueda at the Kyoto University gave the basic lecture entitled 'global environment preservation and environmental technology transfer: problems and prospects'. Mr. Dan, the workshop manager gave the basic proposal entitled 'the future directionality of environmental technology exchange inside the APEC territories by using Internet'. Based on the basic proposal made on the first day, reports and discussions were given in the following sessions, where confirmation was made on the future directions. S1: establishment of the virtual centers in other countries and territories; S2: assurance of interchangeability of classification systems and retrieval functions in providing information, and S3: presentation of examples of inter-territorial exchange and the future directionality. (NEDO)

  5. Achievement report for fiscal 1998. Esophageal vocalization aid system; 1998 nendo seika hokokusho. Shokudo hassei hojo sochi

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    Development has been made on element technologies for an esophageal vocalization aid system. With regard to the speaker, selection and trial production were performed on a speaker used for a phono-coupler to be used in coupling with a telephone transmitter. Performance not differing from that in the currently used telephone set was obtained in the overall characteristics evaluation using a dummy telephone circuitry. For the microphone, two kinds of hands-free microphones were fabricated on a trial basis. In order to develop pitch extraction and amplitude pitch conversion systems, pitch extraction performances were compared and discussed on the following five methods: the auto-correlation method, the Cepstram method, the average magnitude difference function (AMDF) method, the simplified inverse filter tracking (SIFT) method, and the time-domain excitation extractor using minimum perturbation operator (TEMPO) method. The hauling phenomenon, having come up as a problem in an auxiliary digital device, was analyzed to discuss methods for prevention thereof. In developing a voice/unvoiced distinction judgment method, a method using low domain power and high domain power was discussed. Development has been made on exclusive ICs, a voice analyzer, and the using feeling enhancing technology. In developing a total system, a digital unit incorporated esophageal vocalization aid system was developed and improved. (NEDO)

  6. Fiscal 2000 achievement report. Welfare technosystem research and development (Osaka); 2000 nendo welfare technosystem kenkyu kaihatsu (Osaka) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Efforts were made to develop welfare equipment systems capable of satisfying local requirements for helping those in need of nursing care live an independent life, for supporting social welfare activities, and for relieving the loads imposed upon care givers. Efforts were made to develop (1) technologies for improving on the urban type residential space according to the degree of handicap that aged people suffered, (2) a comprehensive self-subsistence assisting system, and (3) a system for monitoring aged people and a system for reporting. Under item (1), flooring materials, flooring systems, residence modification, and welfare equipment were examined for securing a residential space suitable for each of the handicapped persons living in the urban space. Under item (2), efforts were made to develop an integrated assisting system for motor driven wheelchair equipment with a wheelchair regarded as the inevitable partner of a handicapped person, and to develop a toilet seat provided with an automatic elevator capable of sensing human presence. Under item (3), the toilet was assumed to be an accident frequented location, and a system was developed capable of detecting and reporting anomalies in a person seated still. (NEDO)

  7. Fiscal 2000 achievement report. Welfare technosystem research and development (Sapporo); 2000 nendo Welfare technosystem kenkyu kaihatsu (Sapporo) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Activities are conducted on system technologies for ensuring comfortable living circumstances and thereby helping aged or handicapped people live independently in snowy cold regions. The research and development efforts center about the three fields of (1) in-house systems to help aged or handicapped people live an independent life, (2) in-home care equipment systems suitable for advanced welfare oriented residences, and (3) user interface controllers to improve on operating sensation in a motor driven wheelchair. In field (1), studies involve the development of low floor residences for snowy cold regions, improvement on entrances for independent residences helping the inhabitants lead an independent life, and functionally excellent designs for handrails for steps, stairs, or bathrooms. In field (2), surveys are conducted concerning design improvements and their acceptability relative to a universal welfare equipment controller, optimum sound that welfare equipment alarms should produce, and transfer devices. In field (3), studies are made about motor driven wheelchair controllers. (NEDO)

  8. Report on Asian Environment Information Network; 'Asia kankyo joho network' ni kansuru hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The goal is the construction of Asian Environment Information Network (AEInet) in accordance with a contract signed between Indonesia's LIPI (Indonesian Institute of Science) and NEDO under NEDO's Research Cooperation Project Concerning the Development of Environment Measuring Laser Radar (LR). The network is so designed and constituted as to operate on a private line between Indonesia and Japan via IP (Internet protocol) and to enable the exchange on the Internet network of the data collected/analyzed by the Indonesian LR system and of articles of e-mail between scientists of the two countries. The AEInet will be utilized for the collection/analysis of LR-collected data; exchange of observed data and the result of processing; provision of support to environment information scientists in exchanging e-mail and information; and the search of databases for the implementation of the project. In this paper, the outline and functions of the system, network system design, WWW server construction, network operating status, joint researches with Indonesia, etc., are described. (NEDO)

  9. Report on new energy vision at Hinase Town area; 2001 nendo Hinase cho chiiki shin energy vision hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-03-01

    With an objective of accelerating introduction of and uplifting consciousness on new energies at Hinase Town in Hyogo Prefecture, investigations and discussions were given on the energy demand, quantity of new energies available, and the new energy introduction projects for the town, thus a new energy vision was established. The estimated amount of energy consumption in Hinase Town is 242,814,320,000 kcal in fiscal 2000. The amount of carbon dioxide discharge associated therewith is 76.57 t-CO2/year. Regarding the energy consumption by departments, the industrial department consumes the most, followed by the transportation department, civil household department, and civil business department. The new energy introduction projects have discussed servicing of the bio-gas plant utilizing organic wastes and cogeneration, the new energy introduction projects for the Natural Energy Island at Kakui Island and the ocean ranch consisted of the use of solar heat water warmer, solar cell powered street lights, photovoltaic power generation, and electric cars for sightseeing visitors, the Eco-school promotion project for primary schools, introduction of energy saving devices into the town office, and the new energy proliferation and enlightenment project. (NEDO)

  10. Survey for making a data book on the new energy technological development (photovoltaic power generation); Shin energy gijutsu kaihatsu kankei data shu sakusei chosa (taiyoko hatsuden)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Data on the photovoltaic power generation are synthetically collected, systematized, and summarized as a data book on the photovoltaic power system. Main details are as follows: photovoltaic power systems were listed by usage, by size of power generation, and by authority concerned. Significance of adopting the photovoltaic system is stated at each level of each user of the country, local governments and individuals. As to the present situation of the solar cell market, solar cells were arranged in terms of production volume by region, production volume by type, production volume by company, shipment by usage, production amount, and price. With regard to policies of each country on the photovoltaic power system, those of advanced countries including Japan were summed up. Concerning the introduction of the system in each country, examples of the introduction were made clear, and at the same time the estimated volume of and the target for introduction of the photovoltaic power system were summarized. In respect to the subsidy system for the introduction of the photovoltaic power system, arranged were the subsidy system, the preferential tax system and the loan system.

  11. Application of vertical electrical sounding combined with induced polarization method in ground water exploration; IP koka wo koryoshita hiteikoho suichoku tansa no chikasui chosa eno tekiyo

    Energy Technology Data Exchange (ETDEWEB)

    Kondo, M.; Sakurada, H. [Sumiko Consultants Co. Ltd., Tokyo (Japan); Suzuki, T. [Hokkaido Development Bureau, Hokkaido Development Agency, Sapporo (Japan)

    1996-10-01

    For ground water exploration using vertical Schlumberger exploration method, measurement and analysis combined with induced polarization (IP) effect were conducted as trial. For the Schlumberger method, potential is measured at the center between potential electrodes during flow of dc current between current electrodes. In the case of vertical exploration, measurements are repeated with fixed potential electrodes by extending the distance between current electrodes. Ground water exploration was conducted using this method at Otaki village, Hokkaido. Geology of surveyed plateau consists of a basement of Pliocene tuffs and Quaternary Pleistocene sediments covering on the surface. For the results of analysis, four to seven beds were detected from the resistivity. The depth up to the lowest bed was between 25 and 85 m, the resistivity of each bed was between 9 and 8,000 ohm{times}m, and the polarizability was between 1 and 15 mV/V. Among these resistivity zones, it was judged that zones satisfying following three conditions correspond to coarse grain sediments saturated with ground water, and can be expected as aquifers; having resistivity ranging between 100 and 1,000 ohm{times}m, polarizability higher than 10 mV/V, and relatively large thickness. 11 refs., 6 figs.

  12. Survey on synthesis and reaction of environmentally benign water-soluble metal complex catalysts; Kankyo chowagata suiyosei sakutai shokubai no gosei hanno no chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This report describes the research trend survey results on the synthesis and reaction of water-soluble metal complexes which are regarded as environmentally benign catalysts. For the synthesis and catalysis of water-soluble complexes, synthetic methods of water-soluble phosphines, such as sulfonated TPPMS and TPPTS, are described in detail. Synthesis and reactivity of hydroxymethylphosphines are introduced, and the application of electrospray mass spectroscopy is elucidated as a tool for the analysis of them. Changes of the application of transition metal complexes with water-soluble phosphines to catalysis are described. Dual catalysts which have both functions of phase transfer catalysts and homogeneous catalysts are introduced. Concept of counter phase transfer catalysts is also introduced, and some catalytic reactions are described. In addition, this report introduces catalysis of water-soluble polymer-supported metal complexes, immobilization of metal colloids with water-soluble ligands and their analysis, and water-soluble complexes as hybrid catalysts. 144 refs., 94 figs., 10 tabs.

  13. View of the LP gas supply/demand in Asia and a survey of the Middle East trend; Asia no LP gas jukyu tenbo to Chuto doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-09-01

    A study was made on the LP gas supply/demand in Asia including an outlook for 2000. Eleven countries in Asia including NIES countries, ASEAN countries, China and India have been continuing their rapid growth of economy and have rapidly been increasing their energy consumption. There, LP gas spreads as a home use fuel, and countries excluding some LP gas producing countries depend considerably upon the import from the Middle East. The LP gas consumption quantity is steadily increasing in China and India having huge population, etc., and dependence of LP gas is increasing upon LP gas producing countries of the Middle East. Nevertheless, in the Middle East, the domestic consumption of LP gas, mostly butane, is increasing. Namely, butane is used as raw material of MTBE, and LP gas as that of petroleum chemicals. The Middle East has a lot of plant projects of a sizable size in the future, which predicts that LP gas export from LP gas producing countries of the Middle East is decreasing. 2 refs., 62 figs., 57 tabs.

  14. Fiscal 1998 research report on micro-particle control process technology; 1998 nendo micro ryushi seigyo process gijutsu no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For establishment of process technology realizing control of forms and structures of micro-particles on practical equipment, research was made on related elementary technologies and current technologies. The research was promoted aiming at synthesis of micro-particles from nanometer to micrometer in size and their application to functional materials, establishment of the methodology for correlating the microstructure and function of micro-particle materials with fabrication process, and establishment of a common-base technology system in chemical technology aiming at fabrication of functional materials. As for the common- base technology, to clarify its importance, research was made on the fabrication method and dispersion mechanism of nano- particles, particle arraying method by coating, device fabrication technique by coating, and one-step synthesis and coating of nano-particles. As for the project research, synthesis of monodispersed nano-particles at large production rates, fabrication of thin films and bulk materials by arraying and coating. (NEDO)

  15. Evaluation of city buses installed diesel particulate filter systems on fleet test; Diesel particulate filter system wo tosaishita rosen bus no soko chosa

    Energy Technology Data Exchange (ETDEWEB)

    Sudo, H. [Japan Automobile Research Institute Inc., Tsukuba (Japan)

    1997-10-01

    An environmental air quality of suspended particulate matter is insufficient in the big city area. To reduce the particulate matter, improvement of engine and development of the Diesel Particulate Filter (DPF) system are carrying. The purpose of this report is to investigate a possibility of practical use of the city buses installed DPF systems. From March 1995, investigation for practical use of these DPF systems on a route buses was carried in regular service operation of the Tokyo and Yokohama Transportation Bureau. The investigation items are service situation, smoke density and preparation inspection. From the result for 2 years service operation, each DPF systems needed some failure correspondence. but these were not fatal problem on using the DPF system. Then the subject of relative to durability and reliability became clear, and the performance of a low particulate emission DPF system obtained the high value evaluation for users. 9 refs., 4 figs., 2 tabs.

  16. On an outline of investigation results of earthquake damage estimation for Akita prefecture; Akitaken jishin higai sotei chosa kekka no gaiyo ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Nogoshi, M. [Akita University, Akita (Japan). College of Education

    1997-05-27

    This paper reports an outline of investigation results of earthquake damage estimation carried out in Akita Prefecture. The basic policy for this investigation consists of the following: (1) an indication on existence of a blank area in the Akita off-coast earthquake shall be viewed so importantly that a fault model is set to estimate damages; (2) because most of the earthquakes in history of Akita Prefecture are inland earthquakes with magnitude of about M=7, four earthquakes in the past shall be adopted as the set model; and (3) the central Sea of Japan earthquake in 1983 was an earthquake occurred in the Sea of Japan side and caused a great deal of damages to Akita Prefecture, and its epicenter model and damages were investigated in detail, hence these data shall be utilized in verifying the procedure and method for estimating damages studied in the present investigation. This paper reports finally estimated human damages. With an assumed earthquake as strong as the Tencho earthquake in the year of 830, more than 1000 deaths will occur in the city of Akita; with an earthquake in the scale of the Noshiro earthquake in 1694, more than 50 deaths will be counted in the city of Noshiro; one as strong as the Rikuu earthquake in 1896 will cause about 300 deaths in the cities of Yokote and Omagari, respectively; one with the scale of the 1914 Goushu earthquake will result in about 300 people to be killed in the city of Omagari and about 200 people in the city of Yuzawa; and an earthquake estimated to occur in the blank area off the Akita coast will force 33% of the residents of the Kisakata town to be evacuated from their homes. 1 fig.

  17. Investigation on behavior of bacteria in reservoir for microbial enhanced oil recovery; Biseibutsuho (MEOR) no tameno yusonai saikin katsudo ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    Fujiwara, K.; Tanaka, S.; Otsuka, M.; Nakaya, K. [Kansai Research Institute, Kyoto (Japan). Lifescience Research Center; Maezumi, S.; Yazawa, N. [Japan National Oil Corp., Tokyo (Japan). Technology Research Center; Hong, C.; Chida, T.; Enomoto, H. [Tohoku University, Miyagi (Japan). Graduate School of Engineering

    2000-07-01

    Behavior of bacteria activated in reservoir though molasses-injection-tests, was investigated using the restriction fragment length polymorphism analysis with the polymerase chain reaction (PCR-RFLP) method, for elucidating potential bacteria to suppress in situ growth of microbes to be injected into the reservoir in the microbial enhanced oil recovery (MEOR) process. As a result, some bacteria belonging to Enterobacteriaceae species or their close relative species were grown predominantly in the reservoir, among bacteria inhibiting in the ground-water. The foregoing indicates that behavior of these bacteria in reservoir must be taken into consideration when giving a full account of behavior of microbes to be injected into the reservoir to put the MEOR process into operation. Potential proliferation using molasses to activate those bacteria was also estimated on the laboratory tests, to clarify the growth of microbes to be injected into the reservoir to operate the MEOR process. In consequence, it became clear that these bacteria have a potential growth exceeding 10{sup 8} CFU/ml, utilizing molasses. These facts indicated that microbes to be injected into the reservoir at the MEOR field tests are necessary to grow more excellently than bacteria inhabiting in the ground-water. In addition, as flow, the injection fluid is influenced by reservoir heterogeneity caused by injection of molasses, it was inferred that microbes to be injected into the reservoir at the MEOR field process are also necessary to grow more remarkably than bacteria inhabiting in the reservoir brine at high permeability zones and bacteria inhabiting in the reservoir rock. Furthermore, the results of the functional testing for MEOR conducted in the presence of bacteria activated through molasses-injection-tests indicated the importance of effective use of microbes to be injected, taking into account the characteristics of the reservoir and function for MEOR of those microbes. (author)

  18. Lightning observation on 77 KV transmission lines and survey on their failure modes. 77kV sodensen no kaminari kansoku to kosho yoso no chosa

    Energy Technology Data Exchange (ETDEWEB)

    Katsuragi, Y.; Kato, K.; Yokotani, M. (Chubu Electric Power Co. Inc., Nagoya (Japan))

    1991-11-01

    It was intended to investigate comprehensively lightning arrestors to prevent two-line power failure due to lightning on a transmission line and the optical ground wire (OPGW), which was found lately problematical due to damages. Lightning observations were carried out for three years on lightning damages to the entire 77 kV transmission lines which carry both two items. This paper summarizes the discussions done by Chubu Electric Power Company of Japan on its 77kV Mizunami-Oi line in the Gifu prefectural district. The lightning observing equipment is an air-cored Rogowskii coil, consisted of a personal computer linked to series of processors and CPU buses including a lightning surge memory to catch lightning behaviors. The power supply is a lithium battery with a capacity of 90 AH which is light in weight and portable. The observation cost is as low as (1/20) of the conventional method. The use of the equipment clarified the lightning modes, and the data analyses elucidated the effects of the lightning arrestor, as well as reduced the power failures and determined the correlation of lightnings with lightning current waveforms which cause damages to the OPGW. The utilization of the developed lightning surge memory, the lightning arrestor operation annunciator, and the ground failure indicator resulted in a great deal of success. 5 refs., 20 figs., 15 tabs.

  19. Survey of effects of enhancement of the energy supply/demand structure on the global environment. 3; Energy jukyu kozo kodoka chikyu kankyo eikyo chosa. 3

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    For the purpose of studying how the energy supply/demand structure in Japan should be, a report on the secondary IPCC (Intergovernmental Panel on Climate Change) evaluation was analyzed. Possibilities of reducing the world CO2 emissions in association with the energy consumption were studied in the five assumed cases. Every case says that CO2 can be reduced to 1/3 of the 1990 level by 2100. In a case of the use of biomass as main fuel (1), the use of primary energy is suppressed to two times the 1990 level, and photovoltaic/wind/biomass power generation is introduced in a large quantity. Synthetic methanol and hydrogen are used for transportation and commercial/residential use fuels. There are four more assumed cases: the use of nuclear power as a substitute for renewable energy in the power generation in (1), the use of natural gas of 1.5 times that used in (1), the substitution of coal for biomass used in (1), and the assumption that the demand for primary energy in 2100 will be twice that used in (1). In Japan it is assumed that basically the nuclear power generation will be expanded, that the photovoltaic and waste power generation will be introduced in a large quantity, and that synthetic methanol and hydrogen are mainly used as transportation and commercial/residential use fuels. It is necessary, therefore, to analyze conditions under which the quantity introduction of such non-fossil energy is made possible. 11 figs., 31 tabs.

  20. Survey on weather changes associated with large-scale tree-planting. 2; Daikibo ryokuka ni tomonau kiko henka ni kansuru chosa. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    An investigational study was made for large-scale tree-planting aiming at CO2 fixation. Water resource and precipitation relating to tree-planting were determined from NASA data and arranged into the global distribution map. It was found that Australia and the Chinese continent are under the relatively favorable condition. As for the soil condition, nutrition resource is short in the desert and unused zone. From the vegetation data obtained from meteorological satellite NOAA, developed was a method for estimating net primary productivity of terrestrial ecosystem and obtained was a global distribution map for the amount of CO2 fixed under the present terrestrial vegetation. At the same time, areas which have great potentiality of tree-planting were selected from the map for estimating potentiality of the global tree-planting. To study the promotion of rainfall as a means of expanding the potential tree-planting area, the conventional meteorological and physical model was improved, and more realistic simulation was made possible. Also as to the water utilization technology, the modeling method was developed. As the area having a potentiality of expanding tree-planting, Australia (especially the west) was cited as the first candidate, and China the second candidate. 108 refs., 128 figs., 49 tabs.

  1. Survey on Pacific area energy policies by information collection. Laos and Myanmar; Taiheiyo energy seisaku joho nado genchi shushu chosa. Laos, Myanmar

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For planning the Pacific area energy policy of Japan, the field survey on energy situations was carried out in Laos and Myanmar. Since Laos is rich in hydraulic resources, the future electric power development is expected. Development of oil and coal resources is yet in a planning stage. Electricite du Laos (EdL) is in charge of electricity business, and its power generation capacity amounts to 220MW (including hydroelectric one of 93%), and a half of it is exported. Based on the predicted growth rate of 9%/y for domestic power demand, development of the capacity to 440MW by fiscal 2002 is scheduled. Myanmar has natural gas and various mineral resources, and is rich in hydroelectric resources. Myanmar Electric Power Enterprise (MEPE) is in charge of electricity business. The power generation capacity amounts to 1.34GW (including private one of 26%). The power generation facility is composed of gas turbine one of 53% and hydroelectric one of 33%. Based on the predicted growth rate of 11.5%/y for domestic power demand, development of the capacity to 1.6GW by 2001 is scheduled. For the present, conversion of previous gas-firing power plants to efficient combined cycle ones is a main issue. 21 figs., 43 tabs.

  2. New energy technology development related database construction survey (wind power generation); Shin energy gijutsu kaihatsu kankei data shu sakusei chosa (furyoku hatsuden)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    To arrange systematic data relating to new energy, the latest published data relating to the wind energy conversion systems have been collected and arranged. For the overview of wind energy conversion system, wind turbines with horizontal axis and vertical axis, specification of wind turbine, and conceptual figure of wind energy conversion systems are illustrated. For the installation examples, introduction development of wind energy conversion systems in the world is described for Japan, the USA, Germany, Denmark, Spain, Sweden, India, and Belgium. For the relevant legislation and support plan, relevant legislation for the introduction of wind energy conversion in Japan, support plan in Japan, and support plans in foreign countries are described. Prices of wind turbines by wind turbine makers in the world, construction cost by Japanese makers, basic term, and subsidiary company and organization are shown

  3. Survey on the feasibility of simple waste energy systems in medium or small cities; Chusho toshi ni okeru kan`igata haikibutsu riyo energy system no kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For effective use of wastes, the concept of a waste utilization system suitable for local characteristics of the Kyushu district was surveyed. The amount, features and processing method of wastes were surveyed for every kind of wastes and every region. Characteristics of wastes themselves and their use technologies were surveyed to study the energy system concept, and the concept was selected mainly for simple middle or small-scale systems. Main wastes available as heat source showed distinctive distributions every region. The following seven concepts were thus selected: RDF (refuse derived fuel) energy system mainly using general wastes, RDF system using wood chips and agricultural plastic wastes, co-generation system by premixed combustion of chicken manure and combustion improver, premixed combustion of livestock manure and combustion improver, methane fermentation using livestock, distillery and starch wastes, and pyrolytic oil system or gas system using agricultural plastic wastes. Establishment of any systems is difficult only in single region because of their economic scale. The collection and storage methods of raw materials should be studied. 36 figs., 40 tabs.

  4. Study of effects of engine oil additives on the properties of fluorelastomers; Fusso gomu ni oyobosu engine yu tenkazai no eikyo chosa

    Energy Technology Data Exchange (ETDEWEB)

    Kurono, K.; Owaki, M.; Suzuki, Y.; Akiyama, K.; Shionoya, M. [Toyota Motor Corp., Aichi (Japan)

    1997-10-01

    Fluoroelastmers are well known for their resistance to heat and fluids and have become major material for crankcase oil sealers. On the other hand new additive formulations are developed for engine lubricants used for fuel economic gasoline engines. In this paper the effects of those additives on properties of fluoroelastmers are investigated. The results of the immersion tests of both test plaques and oil sealer products indicates that dithiocarbamates friction modifier have hardening effects on fluoroelastomers. The fluoroelastmer deterioration mechanism is presumed by analysis of elastmer samples after immersion in oil. 6 refs., 9 figs., 3 tabs.

  5. Study on the impact assessment for the life cycle assessment (LCA); Kankyo fuka bunseki ni okeru impact assessment ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This report describes the impact assessment which is an important step for LCA. For classification of the impact assessment, the existing literature was reviewed and a skeleton for the classification was proposed. The weighting factors for nine selected impact categories, which were used to calculate environmental load point (ELP) for the valuation, were obtained for two overseas groups, i.e., students of Amsterdam University and SETAC Europe members. It was found that the former provided the similar trends to general Japanese, however that the latter gave high weighting in the global warming and depletion of ozone layer. The ELP was proposed and applied to automatic washing machine, coffee maker, waste incineration power generation system, and co-generation system. As a result, its effectiveness was demonstrated. This report also describes problems for the LCA of thermal and material recycling of PS trays. 99 refs., 96 figs., 73 tabs.

  6. Investigation into the analysis method of total ecobalance in chemical industry products. 3; Kagaku kogyo seihin ni okeru total eko balance no bunseki shuho ni kansuru chosa. 3

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    For the purpose of establishing a total life-cycle ecobalance analysis (LCA) method, the paper studied making of a general computer program for chemical industry products. The study has been made on general-purpose plastics (PET/PSP (polystyrene paper)) since fiscal 1993 aiming at making the CO2 emission computing program covering the entire process of production from extraction of raw materials through waste disposal. In fiscal 1995, the following were conducted for enhancement of generalization of the method: expansion of environmental load items and increase in validity of the concept, and expansion of database. Notice was taken of not only CO2 but SOx, NOx and water quality load items. The survey was made on the recycling situation in Japan and abroad and the PET recycling plant , and environmental load item data are collected to expand database. The program was verified by analyzing an example of reusing PET bottle to carpet, and one-step development can be made toward the establishment of the method. Moreover, an analysis was made for the environmental assessment of the related programs abroad, and a tentative original plan can be proposed for the standardization of environmental load analysis and the integrated assessment method. 39 refs., 130 figs., 76 tabs.

  7. Data book on new energy technology in FY 1997. Wind power generation; Shin energy gijutsu kaihatsu kankei data shu sakusei chosa. Furyoku hatsuden

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    It is an urgent necessity for Japan to promote the technological development and accelerate the introduction and diffusion of new energy. In order to diffuse and enlighten the introduction of new energy technology efficiently, it is necessary to compile various information regarding new energy in a comprehensive and systematic way, and formulate a database. Aiming at the systematic formulation of data on new energy, this survey focuses on the field of wind power generation system (WPS) and provides a collection of the latest published data on WPS, particularly regarding the worldwide installed wind power capacity, support plan and government policies, current situations of WPS market, and major technical characteristics of typical wind turbines. This report consists of the significance of wind energy, world market of wind turbines, government policies, international wind energy development, subsidies for wind energy, procedures of wind turbine system installation, governmental measures for wind energy development, subsidiary companies and organizations, basis of wind energy, and Japan`s wind energy development in 1997

  8. Investigation on innovation of technology development by means of strategic energy intelligence; Energy senryakurontekina approach ni yoru gijutsu kaihatsu no kakushin ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    For the purpose of developing the future innovative energy technology, the paper described a strategic point of view. Effects of the energy issue are remarkable on the next generation and thereafter as seen in the finite of energy resource, global-scale environmental changes, the increasing energy demand, natural/social influences of large-scale technology development. If the technological development is going on in the same way as until now, there will appear limits. Relating to the strategies, to seek what energy should be among the strategies, it is necessary to consider not only global-scale problems but particular conditions in Japan (self-sufficiency, international cooperation, creativity, etc.) Also, wisdom and technique are necessary to attain it. Technological development in a wide sense plays a major role in the energy strategy. Technology innovation must be advanced according to the energy strategy. Integrating ideology into the development of energy technology and selecting therefrom developmental subjects which meet the purpose, required is the construction of the energy system with high flexibility and functionality. Looking at the conventional way of thinking from a different angle and posing a future pull plan, Japan should show leadership to the world. 20 refs., 25 figs., 8 tabs.

  9. Investigational study of optical function materials for two-dimensional data processing; Nijigen joho shoriyo hikari kino zairyo ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper investigated/studied `space light modulation materials,` `dynamic hologram/memory materials,` `optical waveguide path materials,` etc. which become key materials in the high speed two dimensional processing. As to electrooptical materials proposed in this investigational study, the external electric field and the electric charges generated make quality of molecules themselves directly change to memory strong/weak signals of light. Therefore, the response velocity becomes less than a millionth of that of the liquid crystal display, and high speed which is needed for realtime moving image processing is anticipated. Hologram includes the phase information in addition to information on light strength. Therefore, it is a large capacity record medium and at the same time a record medium which can read/write two dimensional information as it is. With optical fiber, images cannot be transmitted as they are. Light waveguide path materials are those that accumulate roles of mirror and lens in a sheet of the material and construct a system which is strong in vibration, as optical parts connecting among materials for two dimensional data processing. 273 refs., 107 figs., 17 tabs.

  10. Results of geophysical survey on Hanaore-fault in the Kyoto urban area; Butsuri tansa ni yoru Kyoto shigaichi ni okeru Hanaore danso chosa

    Energy Technology Data Exchange (ETDEWEB)

    Yoshioka, T. [Geological Survey of Japan, Tsukuba (Japan); Echigo, T. [Osaka Soil Test, Osaka (Japan); Toshioka, T.; Matsubara, Y. [Oyo Corp., Tokyo (Japan)

    1997-05-27

    This paper reports results of gravity survey and seismic survey using the shallow bed reflection method to identify distribution of the Hanaore fault in the Kyoto urban area. In the gravity survey, level differential structure caused by the fault was identified as an abrupt change in Bouger anomalous values. The continuity therefrom made the estimation possible on existence and positions of such faults as the Hanaore fault belonging to the Hanaore fault system, the Shishigaya fault, the Kaguraoka fault, and the Okazaki fault. The estimation as a result of the gravity survey include the following findings: the Hanaore fault runs from south of the Yoshidayama in the south-north direction; the distribution of the Okazaki fault has a level differential structure falling on the east side; the structure shows low Bouger anomaly distribution; and this area forms a rift valley belt. In the seismic survey using the shallow bed reflection method, no distinct reflection plane considered as the basement was verified because of influence from urban area noise. However, it was possible to estimate such an underground structure as a monoclinal fold from shapes of the reflection plane and the distribution depths. 7 refs., 5 figs.

  11. Data book on new energy technology development in FY 1997. Photovoltaic (PV) power generation; Shin energy gijutsu kaihatsu kankei data shu sakusei chosa. Taiyoko hatsuden

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For the purpose of understanding the present status of photovoltaic power system (PVPS) and supporting its promotion, various data were collected. The significance of adopting PV power technology was specified for customers of various levels, such as nation, local communities, industries and individual households, to clarify the CO2 reduction effect and energy pay-back time. Data illustrate the solar cell production according to region, cell types, industries, applications, production value, and market price. Policies for PVPS in industrial countries were compared with those in Japan. Distribution of PVPS in various countries was compared with that in Japan in respect to installations and purposes of the introduction of PVPS. Financial aid programs such as subsidies, tax benefits and loans for the installation of PVPS in Japan were listed. The trend of PV-related budget of MITI was shown with every project`s description. Steps of introducing PVPS from plan to installation were depicted in the form of flow chart. Were shown measures sponsored by the government or local organizations to promote PVPS. Domestic and foreign firms related to PVPS including PV module suppliers, and PV installation contractors were listed

  12. Fracture inspection by BHTV logging through a vinyl chloride tube; Enbi pipe ga sonyusareta kosei deno BHTV ni yoru kiretsu chosa

    Energy Technology Data Exchange (ETDEWEB)

    Horikawa, H.; Okabe, T.; Takasugi, S. [GERD Geothermal Energy Research and Development Co. Ltd., Tokyo (Japan); Yamauchi, Y.; Imanishi, H. [Osaka Soil Test, Osaka (Japan)

    1997-05-27

    A borehole televiewer (BHTV) logging was conducted to investigate cracks in bored wells. The logging process shoots ultrasonic waves onto bore walls and utilizes reflection waves from the bore walls. If the bores are filled with muddy water, or the ultrasonic waves can pass through even if vinyl chloride tubes have been inserted after excavation, the state of the bore walls can be investigated in principle. Conventional optical scanners are, however, incapable of making this investigation. The BHTV logging can be used for identifying lithofacies from reflection intensities from bore walls (it depends on sound impedance of rocks), not to speak of finding cracks. As a result of making logging upon setting time windows from 105 to 145 {mu} sec in a bored well inserted with a vinyl chloride tube, cracks in the bore wall were identified clearly through the vinyl chloride tube. If the distance between the bore wall and the vinyl chloride tube becomes smaller, setting the time window becomes difficult, making reflection data acquisition more difficult. Impacts of decentering in the vinyl chloride tube on the data and the crack analysis result are small. The reflection intensity has decreased by about half as a result of having the circular vinyl chloride tube inserted. 5 refs., 9 figs., 1 tab.

  13. Survey of the waste-fueled power generation introducing technology. Case study 1 (fiscal 1995); Haikibutsu hatsuden donyu gijutsu chosa nado. Case study no jisshi 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    In respect to a cleaning plant which A city is planning to construct, a study was conducted of a rough design of a system of the waste-fueled power plant aiming at high efficiency. The cleaning plant is planned to be constructed at the seashore reclaimed land, securing a wide site area, and a sufficient amount of combustible refuse is estimated to be collected. With the system, heightening of the turbine efficiency is possible using a sea water cooling type condenser, and the use of the bleeder turbine is possible. The results of the study in the stoker furnace and fluidized bed furnace are outlined as follows: In case of the stoker fired furnace, vapor conditions are 450degC and 60 ata, the output energy is 45,900 KW in high quality refuse of 1,050 t/d and 14,600 KW in low quality refuse of 1,050 t/d, and the power generating efficiency is 27.3% and 17.8%, respectively (two-stage condensing extraction turbine). In case of the fluidized bed furnace, vapor conditions are 450degC and 65 ata, the output energy is 45,800 KW in high quality refuse, and 15,600 KW in low quality refuse, and the power generating efficiency is 27.3% and 19.2%, respectively (five-stage condensing extraction turbine). 83 figs., 69 tabs.

  14. Research of environmental bioecosensing technology using ecological information. Part 2; Seitaikei joho ni yoru kankyo bio ecosencing gijutsu ni kansuru chosa. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Basic considerations of exploring and cultivating environmental reporter organisms are summarized. Mechanism of genetic engineering amplification and molecular biological amplification, and approach to combining them to a hardware as a bioindicator system are investigated. For the current status of molecular biological measurement technology for measuring ecological environment and its application, environmental diagnosis from a phyropathological viewpoint, environmental diagnosis using microorganisms, test fabrication of genetic sensor, and overseas examples of environmental monitoring network are described. For the application of ecological information and functions for developing innovative environmental remediation technology, issues and potential areas for research and development regarding the bioremediation technology in which the US has achieved a progress for the benefit of soil environment remediation are summarized. For the phytoremediation, an area of bioremediation, the metabolism of microorganisms which live in the rhizosphere, and the technology for controlling the microorganisms in the soil through plants are investigated. 66 refs., 50 figs., 17 tabs.

  15. Study on the application of plasma technology to advanced global environmental harmony type technology; Kankyo chowagata gijutsu no kodoka eno plasma no oyo ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Plasma application technology is systematically investigated. Fundamental feature of plasma, method of plasma generation, special features of plasma, and its application area are arranged. The present application area of plasma chemical reaction in industry has been arranged for each utilization and process according to the patents research and scientific journals. For the global environmental harmony type technology, functions required for the membrane separators are investigated by assuming the recovery of environmental load substances, and possible manufacturing process of the membrane by using plasma technology is also investigated. For the improvement of catalysis by the plasma process, the requirement for the catalyst, a fine particle effect for catalyst, production of catalyst, plasma technology applicable to the improvement of catalyst, thermal plasma, and low-temperature plasma are described. For the application of plasma to enhance the catalysis reaction, synthesis of ammonia and methanol are described. 177 refs., 67 figs., 18 tabs.

  16. Study of underground structure of Osaka basin and seismic ground motions; Osaka bonchi no chika kozo chosa to Hyogoken nanbu jishin ni yoru jishindo

    Energy Technology Data Exchange (ETDEWEB)

    Iwasaki, Y. [Geo-Research Institute, Osaka, Osaka (Japan)

    1996-05-01

    This paper describes the following matters on the study of underground structure of Osaka Basin and seismic ground motions caused by the Hyogoken-Nanbu Earthquake. Elastic wave investigations using reflections intended for deep structures were carried out in the Hyogo prefectural area and the Osaka bay area by an association of the Geological Survey Institute, Hyogo Prefectural Government, Kobe Municipality and Universities. Reflection investigations were conducted in the Osaka land areas using the east-west traverse line along Yamato River (by the Geological Survey Institute), the south-north traverse line along the Naniwa street in the city of Osaka, and the east-west traverse line at the south end of the Uemachi fault. In addition, investigations using shallow bed reflections were performed in the Osaka bay area by the Hydrographic Office. Results of the active fault investigations using the reflection method may not agree with positions of faults which are estimated topographically. An existing structure model of the Osaka basin (something like of a primary approximation) and the result of inverse analysis on epicenter faults in the Hyogoken-Nanbu Earthquake were used as the base for calculating seismic motions in the Abeno area in Osaka City. The result agreed relatively well with observations if the calculation is intended for waves having cycles longer than about two seconds. 6 figs.

  17. Application of geophysical methods to investigation of old castle, especially of the moat; Joshi no chosa ni okeru butsuri tansa no tekiyo (horiato no tansa)

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, A.; Karube, F.; Kobayashi, M.; Toge, M. [OYO Corp., Tokyo (Japan)

    1996-05-01

    An explanation is made about the application of geophysical methods to the investigation of the ruins of old castles especially of their moats. Techniques currently in use for exploration of the ruins of castles are mainly underground radar exploration and electric exploration. The underground radar method sends electromagnetic waves through the ground and receives the reflection for a high-precision exploration of the layers shallow in the ground. Therefore, this method is suitable for probing the ruins of castles relatively shallow in the flat land, hills, and mountains. The electric method (resistivity image method) do the probing by use of the two-electrode arrangement, performs inverse analysis on the basis of the obtained data for the determination of the underground resistivity distribution, and displays the distribution in an image easy to read. This method, when there is a great separation between the two electrodes, explores relatively deep into the ground. Thanks to this feature, this method is effective in probing relatively wide and deep ruins of moats, that is, the ruins of moats of castles built in later years, especially of those then filled with water. 2 refs., 5 figs.

  18. Development of the electromagnetic tomography system. Sensitivity study of anomalous body by model studies; EM tomography system no kaihatsu. Model kaiseki ni yoru ijotai no kando chosa kekka

    Energy Technology Data Exchange (ETDEWEB)

    Kumekawa, Y.; Miura, Y.; Takasugi, S. [Geothermal Energy Research and Development Co. Ltd., Tokyo (Japan); Arai, E. [Metal Mining Agency of Japan, Tokyo (Japan)

    1996-05-01

    An examination was made by a model analysis on sensitivity and the like against a resistive anomalous body, in connection with an electromagnetic tomography system with surface earthquake sources and underground receiver arrangements. A resistivity model was of a three-dimensional structure, and built with a 5 ohm{center_dot}m low resistivity anomalous body assembled in a 100 ohm{center_dot}m homogeneous medium. As a result of the examination, it was shown that the size limitation of an analyzable anomalous body was 50{times}50{times}20m at a frequency of 8 to 10kHz and that a system with high precision in a high frequency range was necessary. The examination of effects under a shallow anomalous body revealed, for example, that the fluctuation of a low frequency response was large compared with a deep anomalous body and that, where a second anomalous body existed under it, the effect also appeared with a surface earthquake source positioned in the opposite side from the anomalous body. The examination of effects under the three dimensional structure revealed, for example, that a remarkable change appeared in the data with the change in the inclined angle of the transmission line against the strike of the anomalous body. 4 refs., 7 figs.

  19. Fiscal 1995 research investigation on chemical process technology using supercritical fluid; 1995 nendo chorinkai ryutai wo riyoshita kagaku process gijutsu ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    With relation to the supercritical fluid utilization technology, conducted in fiscal 1995 were collection of basic data, extraction of R and D subjects and survey/analysis of application fields based on the literature survey and overseas field survey. From the research results, the following were selected as research subjects: as to the clean/recycling process technology, non-selection cascade treatment process of mixed waste plastics, hazardous waste treatment process, and radioactive waste treatment process. As to the unused resource utilization process technology, the supercritical submerged combustion power generation process, heavy hydrocarbon resource reutilization process, biomass synthetic utilization process, and carbon dioxide reutilization process. As to the next generation reaction process technology, the simple reaction process, de-organic solvent process, chemical materialization process for methane, and reaction separation combined process. As the innovative material process technology, the plastic forming process, high-functional materials, high-efficiency energy conversion materials, and heightening of function of solid wastes. 537 refs., 116 figs., 54 tabs.

  20. Investigation on research for improvement of automatic technology of underwater processing; Suichu netsukako gijutsu no kodoka jidoka ni kansuru kenkyu chosa

    Energy Technology Data Exchange (ETDEWEB)

    Katsumura, M.; Ogawa, Y.; Sumitomo, T.; Yoneda, S.; Tanaka, M.; Morita, T.; Sakakibara, M. [Shikoku National Industrial Research Inst., Kagawa (Japan)

    1997-01-20

    Improvement and automation of the underwater thermal technology were investigated as a part of the basic technology common to the ocean development. Elements of study required for the underwater technology development are the element common to that required in the atmospheric air and the element attributable to high pressure and submerged atmospheric environment. The element technologies required are those for welding, bonding, cutting, surface treatment, cleaning, inspection, etc. In underwater, much higher grade technology is required than on the ground in view of human work ability and safety. The technology development is thought to be toward to autonomy and intellectualization, but the complete change at once to autonomous task robot is difficult in view of the degree of technology maturation. There are a wet method (perfect submergence or local drying) and a dry method as the underwater welding method, but automation of the wet method has not advanced yet. The method is divided also by a difference in water depth to be applied. Depending upon the object, it is better to improve manual handling and to develop work support equipment. As subjects common to each processing technology, separately studied was each of technologies of heat source control, metallurgical phenomena in high temperature/pressure atmospheric air, and automation. 474 refs., 116 figs., 32 tabs.

  1. Investigations on an environment friendly chemical reaction process (eco-chemistry). 2; Kankyo ni yasashii kagaku hanno process (eko chemistry) ni kansuru chosa. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    In order to structure a chemical reaction process that does not discharge a large amount of waste by-products or harmful chemical substances, or so-called environment friendly process, investigations and discussions were given based on the results derived in the previous fiscal year. A proposal was made to reduce environmental load on development of oxidized and dehydrogenated catalysts that can produce selectively ethylene, propylene and isobutylene in an oxidation process. In liquid phase oxidation, redox-based oxidation and solid catalyzation of automatic oxidation reaction were enumerated. In acid base catalyst reaction, development of ultra strong solid acid was described to structure no pollution discharging process. In the fine chemical and pharmaceutical fields, the optical active substance method and the position-selective aromatics displacement reaction were evaluated to reduce environmental load. A questionnaire survey performed on major chemical corporations inside and outside the country revealed the following processes as the ones that can cause hidden environmental problems: processes discharging large amount of wastes, processes treating dangerous materials, and processes consuming large amount of energy. Development of catalysts is important that can realize high yield, high selectivity and reactions under mild conditions as a future environment harmonizing chemical process. 117 refs., 23 figs., 22 tabs.

  2. Investigational research on CO2 isolation technology in fiscal 1995; 1995 nendo nisanka tanso no kakuri gijutsu ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The paper studied present technical subjects and future study subjects of the CO2 isolation technology in order to clarify technical and social problems and the developmental subjects of the CO2 isolation technology and related technologies for separating/concentrating CO2 emitted in relation to quantity consumption of fossil fuel and storing it in ocean or underground. Main items for the study were: (1) investigational study of the technology of CO2 ocean storage, (2) investigational study of environmental effect assessment in storing CO2 in ocean, (3) investigational study of the technology of CO2 ocean storage, etc. Technologies required for the ocean isolation were arranged such as CO2 storage, injection, dispersion technique, CO2 behavior simulation, and the developmental subjects were extracted. Further, in the deep-sea bottom storage method, a simulation to calculate the range of PH effects was conducted presuming the specified amount of CO2 and applying known physical values, and evaluation of the CO2 ocean discharge/solution method was made. A method was also studied for experiments on water bacteria and benthos. 127 refs., 102 figs., 81 tabs.

  3. Survey of the actual state of the coal related research and development in Japan. 11; Nippon ni okeru sekitan kanren kenkyu kaihatsu jittai chosa. 11

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    NEDO is surveying the actual state of the coal related research/development in Japan to supply information on the coal related research/development in Japan to IEA`s coal research project database. This book of fiscal 1997 version includes 338 subjects. The details described are name of research institute, the section in charge, address, name of country, telephone No., name of joint researcher, research theme, classification, outline of research, project No., name of researcher, sponsor, the budget appropriated, term of research, remarks, etc. The books of data collected from each country in surveys of the actual state of the coal related R and D and IEA`s coal researches which have been made so far are submitted for general viewing at NEDO Information Center. Also, a part of those can be accessible from the energy database of which NEDO Information Center is performing on-line service for user members

  4. Fiscal 1998 joint promotion basic research report. Energy saving project for Achinsk refinery in Russia; 1998 nendo kyodo jisshi nado suishin kiso chosa. Roshia Achinsuku seiyujo shoene project

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For prevention of global warming by greenhouse effect gas, study was made on energy saving measures for Achinsk refinery in Russia. Achinsk refinery is a relatively new plant put into operation in 1983, however, because of no various equipment for use combustion heat effectively, its average thermal efficiency is as low as 60%-70%, resulting in fuel consumption more than necessary one. Based on the study result, the following remodeling designs were made: Improvement of a heat exchange efficiency by relocation of heat exchangers to reduce fuel consumption of a heating furnace as much as possible, conversion of an existing heating furnace based on an old design concept to an advanced one, installation of a waste heat recovery system including a preheating convection unit and air preheater, reinforcement of heating furnace wall insulator, installation of an optimum control system for furnace operation, and improvement of a fuel supply system efficiency. This design showed possible reduction of heating furnace load, and possible furnace thermal efficiency of 90%. (NEDO)

  5. Survey of pollution-resistant plants and their cultivating techniques; Osen busshitsu taisei shokubutsu to sono shokusai gijutsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The reduction of forests due to environmental pollution has been surveyed, to investigate the pollution-resistant plants and solid microorganisms. In Japan, the blight of needle-leaf trees (pine and momi fir) and of Japanese oak has occurred, and blight of some other trees, such as wild cherry trees, Japanese apricot trees, birch, Japanese cedar, cypress and bamboo, has been reported from various regions. In this article, plants reported to be resistant to pollutants are listed, and the physiological features of these plants are described. Furthermore, to develop pollution-resistant plants, reports relating to clarification of the mechanism of resistance development and the genes involved are reviewed. Microorganisms which symbioses for roots support these root functions. They also suppress the activity of pathogenic microorganisms and improve the environment around the roots, thus helping plants to grow normally. The roles played by symbiotic microorganisms and how to utilize these organisms are discussed. Their functions in coping with acid rain and heavy metal pollution, and how to utilize such functions are also discussed. 707 refs., 13 figs., 13 tabs.

  6. Global environment assessment survey by advancing the energy demand and supply structure. 4; Energy jukyu kozo kodoka chikyu kankyo eikyo chosa. 4

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    To investigate the energy demand and supply structure in Japan, the international trend of approaches to global warming problems and the mitigation options to global warming in the energy related sectors have been surveyed. For the United Nations Framework Convention on Climate Change, an Ad-hoc Group has discussed relevant topics after the 1st conference of the Parties. Meetings of the Group primarily focused on what objectives to set for the reduction of greenhouse gas (GHG) emissions in and in and after 2000. IPCC completed their Technical Paper in November 1996 in which technologies and measures to reduce GHG emissions and to enhance GHG sinks were analyzed and evaluated in various aspects. This Paper discusses about each sector of institutional buildings sector, transport sector, industrial sector, and energy supply sector. Especially, in the energy supply sector, promising approaches to reduce future emission include more efficient conversion of fossil fuels, switching to low-carbon fossil fuels, decarbonization of flue gas and fuels, CO2 storage, switching to nuclear energy, and switching to renewable sources of energy. 5 refs., 2 figs., 14 tabs.

  7. Research report for fiscal 1998. Promotion of activities implemented jointly etc. in China; 1998 nendo Chugoku ni okeru kyodo jisshi katsudo nado suishin chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The Kyoto Protocol allows some flexibility in the implementation of methods for achieving the goal, such as emission trading, activities implemented jointly (AIJ) among advanced countries, construction of clean development mechanisms (CDM) with developing countries, etc., and Japan intends to positively make use of them for the achievement of the goal. For China, who holds second place in the list of greenhouse gas emitting countries in the world, the promotion of CDM is quite important. With the situation taken into consideration, interaction was effected with Chinese officers and scientists of government agencies and academic institutes involved in environmental matters, and researches were conducted. Views and information were exchanged regarding environmental problems and, after on-site investigations, researches were conducted and suggestions were presented as to how AIJ and CDM should be. The suggestions covered Chinese policies toward AIJ and CDM, current state of AIJ projects in China and systems for their promotion, means for enhancing such projects, and discovery of candidates for AIJ and CDM project application. (NEDO)

  8. Survey of the trend of technical development and industrial policies in Asian countries; Asia shokoku ni okeru gijutsu kaihatsu no doko to sangyo gijutsu seisaku ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    A sharp rise in industrial productivity in Asia countries indicates a rising level of R and D technology. Since Japan has not clearly grasped the R and D ability in these countries, it has not given appropriate personnel/material R and D support to them. Therefore, for the purpose of exactly grasping the R and D ability of Asian countries (Korea, Taiwan, the Philippines, Indonesia and India) and studying an effective and appropriate method for R and D cooperation, a survey was conducted of R and D potentials in Asia and R and D support policies of the countries. As a result of the survey, the following are taken up as items to be considered: promotion of exchanges between Tsukuba, etc. in Japan and research/university towns and science parks being constructed in lots of countries, participation of private companies in high-tech joint work in cooperation with Japan, sending information from Japan using internet, etc. and exact grasp of needs at partner side, cooperation given to new comers without asking for research results (use of OB researchers, etc.) 25 refs., 39 figs., 59 tabs.

  9. Questionnaire investigation for the earthquake in Honjo city and Yazawa city, Akita Prefecture; Jishin ni kansuru ishiki chosa (Akitaken Honjoshi oyobi Yuzawashi ni okeru anketo kara)

    Energy Technology Data Exchange (ETDEWEB)

    Nogoshi, M. [Akita University, Akita (Japan). College of Education; Kabutoya, S.

    1996-05-01

    Consciousness for the earthquake was investigated by questionnaire surveys made in Honjo City and Yuzawa City, Akita Pref. in October 1995 twelve years after the Nihonkai Chubu Earthquake (M=7.7) in May 1983. The survey was conducted in terms of 27 items including personality, memory, knowledge/interest, psychology/action, mental attitude/preparations, wishes for researchers and administration, etc. Also included were the items on the Great Hanshin-Awaji Earthquake and the earthquake blank areas. The number of distributed questionnaires and the recovery rate of them are 1500 and 79.2% in Honjo City, and 1700 and 84.7% in Yuzawa City. From the survey, it was found that people have a lot of knowledge of and high interest in the earthquake and well remember it, and a lot of people know of tsunami, liquefaction phenomena, and the earthquake blank area. Further, they are afraid of earthquakes and think of their actions to be taken in case of earthquake. However, most people are little prepared for earthquakes. Important future subjects were suggested for the study of disaster prevention measures. 13 figs.

  10. Project to promote the development of global environmental industry technology. Feasibility study of research exchanges; Chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo. Kenkyu koryu kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    In fiscal 1995, three teams were organized to study the following subjects: plant genetic and cellular engineering in relation to drought stress; simulation models of global environment for accurate assessment and prediction; the APEC Virtual Center for environmental technology exchange. The team studying plant genetic and cellular engineering in relation to drought stress visited the Department of Botany, Hebrew University of Jerusalem, Israel, the Jacob Blaustein Institute for Desert Research, Ben-Grunion University, Israel, the Department of Biochemistry and the Office of Arid Lands Studies, Arizona University, the U.S. to survey the present and future trend of the study and feasibility of research exchanges. The team studying simulation models of global environment for accurate assessment and prediction visited Yale University, Massachusetts Institute of Technology, Electric Power Research Institute, and Battle Research Institute in the U.S. to survey feasibility of research exchanges. The team studying the APEC Virtual Center for environmental technology exchange visited institutes in ASEAN countries to survey needs for the Virtual Center. 312 refs., 74 figs., 17 tabs.

  11. Feasibility study on the demonstrative test on the hybrid mini hydroelectric power generation technology. 2; Hybrid gata mini suiryoku hatsuden gijutsu ni kakawaru jissho shiken kanosei chosa. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    A study was made for the purpose of electrification of unelectrified zones of the mountainous areas in developing countries using extremely small hydroelectric power facilities. The target for this project is a development of a micro hydroelectric power system with a size of about 5kW, which is estimated regarding that 1 village has 80 houses and each house needs electricity of 60W. In the study, the low-head system using a weir of irrigation channels in Subang pref. of West Java state was selected by the evaluation of access, stability of flow rate, natural conditions, etc. The hydroelectric power plant is of a flow-in method in which water is taken from the left bank and is injected/discharged to the downstream of the left bank. As the hybrid complementary power source, hybrid battery with a two-hour charging time at peak and a capacity of 3.5kWh was considered. When estimating the construction cost of the hybrid micro hydroelectric power system and equalizing by durable years, the operational cost per kW is 15 times higher than the benefits which local people receive. It was judged to be difficult to say that the micro hydroelectric power system is economically feasible. It was predicted that the financial profit during the demonstrative test is good, according to a trial calculation of income from power rates and the operational cost. 18 refs., 90 figs., 53 tabs.

  12. Survey on the construction of realization scenario of large-scale revegetation of arid regions; Daikibo ryokuka no jitsugenka scenario sakusei ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    In order to fix carbon dioxide as a measure to mitigate global warming, research of large-scale revegetation of arid regions has been conducted toward the ultimate goals of systematizing revegetation technologies centered on securing and using water resources, evaluating the feasibility of arid revegetation by extending the viewpoint to examine even rainfall increase by artificial means, and establishing a strategic program for large-scale revegetation. A trial revegetation feasibility map was made for a selected target region in Western Australia, and rough revegetation steps were formulated. Selection of proper region, introduction of technology, and planning were conducted by grasping environment of the target revegetation region. As a result, it was found that growth of plants is vigorous at the catchment areas due to the surface water transfer along the topography of surface in spite of poor rainfall. Obstruction of plant growth is partly caused by the corrosion of soil and accumulation of salt, but mainly caused by the shortage of water. Based on these data, ranking of proper regions was evaluated. When the technology is introduced in the region with A-rank, several times of water can be collected. 60 refs., 61 figs., 30 tabs.

  13. Investigation of nitrous oxide (N2O) abatement technologies. 2; Asanka chisso (N2O) no teigen taisaku ni kansuru chosa. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Emission amount of nitrous oxide (N2O) from anthropogenic sources is analyzed, and reduction effects by the abatement technologies are evaluated. The concentration of nitrous oxide in the atmosphere continues to increase and emissions from agricultural and ecosystem sources are drawing particular attention. For the emission of N2O in Japan, 8.28 Gg-N2O per year is emitted from fossil fuel combustion facilities, 6.95 from waste incineration facilities, 22.5 from transportation vehicles including automobiles, 26.7 from the chemical industry including establishments engaged in adipic acid production, 2.1 from sewage treatment facilities including septic tanks, 6.3 from farmland, and 7.1 from livestock excrement. For the N2O abatement technologies for different sources, fuel improvement, high temperature combustion, acceleration of reduction decomposition reaction, and development of catalysts are significant for the combustion technologies. In connection with N2O discharged in the process of adipic acid production, major businesses have internationally committed to up to 99% abatement of the N2O emissions by 1998. With regard to wastewater and sewage treatment facilities and septic tanks, improvement in COD/NO-N ratio, retention period, pH level, and reduction process is pointed out. 204 refs., 70 figs., 53 tabs.

  14. Investigations on measures to reduce nitrous oxide (N2O); Asanka chisso (N2O) no teigen taisaku ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Discussions were given on measures to reduce N2O as part of the measures to prevent global warming. Nitrous oxide has a long atmospheric lifetime of 150 years, and its greenhouse warming potential will increase by 310 times that of CO2 after 100 years. It can also be a cause of ozone layer destruction. Nitrous oxide is estimated to have influence of about 10% as compared with CO2 even under the present conditions. Discharge of N2O from manufacturing process of adipic acid is aimed to be eliminated totally by 1998. Improvement in efficiency of combustion of fossil fuels and wastes serves most effectively to reduce not only N2O but also CO2. Nitrous oxide generated in sewage treatment as in sewage purifier may be reduced if the batch process is turned into a continuous process, but assistance from policy side would be required for wider adoption of the process conversion. No environmental regulations are applicable to N2O, whereas a problem is present that the number of system installation would not grow because of economic reasons even if the system is feasible technically. Another problem is that the N2O reducing technology is in trade-off relation with other warming gases such as NOx and methane. Comprehensive technological evaluations aimed at optimization must be moved forward in the future. 236 refs., 102 figs., 78 tabs.

  15. Survey on the possibility of international cooperation on production technology of biohydrogen; Bio suiso seizo gijutsu ni kakawaru kokusai kyoryoku kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    R and D on the production technology of hydrogen by biotechnology is one of the effective projects for worldwide energy supply technology and global environment protection technology in the 21st century. The research trend of various institutions promoting R and D on production technology of biohydrogen in the U.S.A. and other countries was surveyed together with the possibility of international cooperation. The production technology of biohydrogen is being watched over the world. Various researches are in promotion corresponding to environmental conditions as follows: search of not only photosynthetic bacteria but also such bacteria with hydrogen productivity as algae and anaerobic bacteria, and the gene engineering study for improving the hydrogen productivity of target microorganisms. All the institutions visited for this survey have great expectations in wide cooperative study in the future. On the possibility of international cooperation on the production technology of biohydrogen, the further precise survey should be promoted for developing more effective technologies based on the previous survey results. 156 refs., 10 tabs.

  16. Investigations during fiscal 1995 on capability of oceans to absorb and fix carbon dioxide; 1995 nendo kaiyo no nisanka tanso kyushu kotei noryoku no chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Investigations were given on capability of oceans to absorb and fix carbon dioxide as part of measures to prevent global warming. Carbon dioxide absorption and fixation in oceans relate to biological and chemical processes, whereas parameter dependence of each process was investigated. In relation to dissolution and dissociation of carbon dioxide into oceans, the parameter that governs exchange of carbon dioxide between atmosphere and ocean is partial pressure of carbon dioxide in surface sea water. This partial pressure is largely affected by water temperature, total carbonic acid and alkalinity. Particle-shaped organic carbon (detritus) is formed mainly by withering of photoplanktons. Formation of calcium carbonate due to activities of living organisms increases the carbon dioxide partial pressure. Fluxes of detritus are predominant among the whole precipitation flux in carbon circulation, which are more than two times the precipitation flux of photoplanktons. Particles are turned into inorganics by bacteria during the precipitation process. 29 refs., 21 figs., 6 tabs.

  17. Survey of the situation of technology succession. Databases of articles including in industrial technology museums; Gijutsu keisho jokyo chosa. Sangyo gijutsu hakubutsukan shuzohin D.B. hen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    To promote the succession of history of and the creative use of industrial science technologies, the paper made lists and databases of the articles of industrial technology museums and material halls in Japan. Record/preservation and collection/systematization of history of the industrial technology is useful for forming bases necessary for promotion of future research/development and international contribution. Museums and material halls are the fields for making comprehensive and practical activities. The data were made as one of the basic databases as the first step for promoting activities for examining the technical succession situation in a long term range continuously and systematically. In the classification of the data, the energy relation was divided into electric power, nuclear power, oil, coal, gas and energy in general. Others were classified into metal/mine, electricity/electronics/communication, chemistry/food, ship building/heavy machinery, printing/precision instrument, and textile/spinning. Moreover, the traffic relation was classified into railroad, automobiles/two-wheeled vehicles, airline/space, and ships. Items were also set of life relation, civil engineering/architecture, and general. The total number of the museums for the survey reached 208.

  18. Report of the researcher exchange promotion project on the environmental issues in the Asia-Pacific region; Asia/Taiheiyo chiiki kankyo mondai kenkyusha koryu sokushin jigyo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Proposals have been made for the establishment of a network (ETERNET-APR) linking those involved in the research and development of environmental technology in the Asia-Pacific region in order to limit the environmental impact of industrial activity. By pursuing active exchanges of information and personnel, researchers in environmental technology in the Asia-Pacific region have been making serious efforts to establish such a network. This fiscal year, the Internet Web site of the ETERNET-APR has been created using the data collected to date. This database includes information on some 350 researchers and 200 research projects from seven countries. The first international symposium was successfully held at Environmental Research Institute of Chulalongkorn University in Thailand (ERIC), hosting 200 environmental researchers from 10 countries in the Asia-Pacific region. Tripartite sister laboratories ties among the National Institute for Resources and Environment (NIRE) and three Korean laboratories were forged. The sister laboratory project between ICETT and ERIC is also proving effective. These successes prove that intraregional joint research, the objective of ETERNET-APR, has begun to take shape in this year

  19. Report on the general course training of the fiscal 1996 coal engineer training program; 1996 nendo sekitan gijutsusha yosei jigyo ippan course kenshu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-01

    The paper reported the general training of the fiscal 1996 coal engineer training program supported by NEDO. In Japan, where natural resource is poor, it is important to transfer from its petroleum dependence energy structure to the system for new energy development and dispersed energy supply. Coal resource is distributed widely in the world and is expected to spread in the future as a main substitute for petroleum. Worldwide attention is much paid to coal supply/demand and environmental problems, but the situation surrounding coal is not necessarily favorable. Under these conditions, Japan is a prominent coal importing country and is on the world-top level in terms of coal utilization technology. Japan has heavy responsibility and needs to play a leading role in adjusting and solving various problems on coal both domestically and internationally. Under the circumstances, 7 persons who are engaged in the coal related business and expected to be in future (3 from the mining relation and 4 from electric power comapanies) participated in the training this fiscal year and received the top-level training in Japan and overseas. 20 figs., 3 tabs.

  20. Report on the cooperative study of technology to collect valuable resources in brine; Kansuichu no yuka shigen kaishu gijutsu ni kansuru kenkyu kyoryoku hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    The paper reported on the research, design, and evaluation on a system to recover by sedimentation magnesium from the brine in the salt manufacture by solar evaporation in Mexico, and a system to recover by adsorbent lithium, boron, etc. from the brine of the solar pond salt field in China. In the case of Mexico, an overall recovery system was developed, but in the evaluation of economy of the system, it cannot be said that the system is feasible even if assuming that the required fresh water can be secured. It was found out that the economical efficiency largely depends upon the cost of hydrated lime and the selling price of magnesia clinker. In the case of China, a plant for production of 500 tons/year of lithium carbonate was conceptually designed to evaluate the economical efficiency. As a result, the internal profitability of the plant is not so high, approximately 6%, though continuously profitable during the operation of 15 years. It was indicated that the project was not economically very efficient. 164 figs., 44 tabs.

  1. Achievement report for fiscal 1998. Mobile meal delivery robot for aged and disabled people; 1998 nendo seika hokokusho. Koreisha shogaishayo shokuji hanso jido robot system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    The following items were developed as the development of element technologies for a mobile meal delivery robot for aged and disabled people: a small-size manipulator, a moving mechanism for the robot, an environment perception unit (a built-in environment perception unit, a navigational environment perception unit, and a manipulation of environment perception section), an information display, navigation technology (a path planning section and a drive control section), and a remote supervisory control unit. The development of a total system realized generation of the basic robot path based on the food tray delivery data in a simulated environment, and a series of operation of food tray delivery and collection along the basic path. When the qualitative evaluation in the practical operation evaluation test and the quantitative evaluation in the simulated environment test are considered comprehensively, 'autonomy' and 'human friendliness' to coexist with human being were given good evaluation. The objective was achieved to realize a robot that has not existed in the past, and is received in general use. However, regarding its 'operability', the evaluation concluded that further speed increase is required for practical use at sites, which is the subject left as the future assignment. (NEDO)

  2. Leading survey and research report for fiscal 1999. New technology based on functions involved in intracellular protein transport; 1999 nendo saibonai tanpakushitsu yuso kino riyo gijutsu kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    An intercellular transport technology (artificial manipulation of an intracellular protein transport system in eucaryotes) is studied for the accumulation of cytotoxic proteins, whose expression has so far been difficult, and activated proteins, which have avoided decomposition, in appropriate intracellular minute organs. The aim is to construct a system to allow foreign proteins high in productivity and quality to express themselves for production in eucaryotes. Basic surveys were conducted of the intracellular biological functions of single-membrane organelles (endoplasmic reticulum, peroxisome, vacuole/lysosome, and Golgi body), the molecular mechanism of protein transport to each organelle, and protein activation and quality control, and element technologies were extracted. For the development of novel pharmaceuticals making use of the intracellular protein transport technology, an activated protein production system was built and a search was made for transport activity impeding substances. Research tasks relative to the development of the new technologies were isolated, such as the visualization of intercellular transport. A survey was made of the market for pharmaceuticals, cosmetics, enzymes, and visualizing equipment (fluorescence microscope provided with new functions), etc. (NEDO)

  3. Fiscal 1997 report on the results of the international standardization R and D. Robot control system; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Robot seigyo system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    R and D of the robot control system was conducted in the following items: 1) integrated open control system, 2) remote control robot manipulation language, 3) human factor robot use built-in LAN system, 4) built-in actuator driver. In 1), there were some problems to be pointed out around the system, but the effectiveness was confirmed as system architecture of each verification item. In 2), development/design were made of RCML(R-Cube Manipulation Language) as a remote robot manipulation language, telecommunication protocol, and the experimental system, and the international standardization was targeted. In 3), the R and D was conducted of the realtime telecommunication protocol which clears the standards for the distributed control required for construction of human factor robot and the advanced realtime micro-controller, ULSI, which is the one that the protocol was made IC. In 4), an intelligent connector for built-in actuator was developed which enables saving of wiring in robot system and plug-in connection. 13 refs., 186 figs., 53 tabs.

  4. Report on the results of `the R and D of industrial technology information base arrangement`; `Sangyo gijutsu joho kiban seibi kenkyu kaihatsu` seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In relation to information processing in the open type research information networking, R and D were conducted to establish basic technologies such as grading-up, acceleration, enhancement of efficiency, diversification of application, promotion of usable data accumulation, etc. As to the R and D of software to promote sharing of research information, software was developed which can easily modify and renew management objects for users at research sites, etc., and the target was almost achieved. Concerning the R and D of information supply technology, an approach was presented whereby clients submit bids for each stream of the data requested and the admission decision is made so as to maximize gain of the session under network capacity constraints. Additionally, the R and D were made of software to construct an international information sharing system, a system for multi-lingual I/O, text manipulation and communication, and software for remote use of network based information for scientific computing. 138 refs., 125 figs., 33 tabs.

  5. Report on a new energy vision establishment project for the Kaimon Township area in fiscal 1998; 1998 nendo Kaimonmachi chiiki shin energy vision sakutei gyomu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This paper reports on new energy vision establishment for the Kaimon Township area located in the skirts of Mt. Kaimon standing at the southernmost tip of the Japanese main island. The available new energy amount may be estimated for solar energy at 10.08 x 10{sup 6} kWh/year, solar heat at 5389 x 10{sup 6} kcal/year, wind power at 20.3 x 10{sup 6} kWh/year, wastes energy at 3111 x 10{sup 6} kcall/year, biomass forestry resources at 77 x 10{sup 6} kcal/year, and biomass stockbreeding resources at 27765 x 10{sup 6} kcal/year. Total energy available will be 30.38 x 10{sup 6} kWh/year for electric power generation, and 36342 x 10{sup 6} kcal/year for heat source. The area has more insolation than the national average, making potential high for solar energy power generation. Areas with annual average wind velocity of 5.5 m/s or higher are distributed widely, whereas wind power can correspond to 90% of the annual electric power consumed in the town. Geothermal temperatures are too low, making it difficult to be utilized for power generation, but could be used for heating hot spring water. Other energies, wastes and biomasses available in the town are not so great in quantity. The township will take the leadership in planning introduction of model type new energy facilities, and develop positively the enlightenment and proliferation activities for the time being. (NEDO)

  6. FY 1997 research and development of fusion domains. Part 1. Studies on cluster science; 1997 nendo seika hokokusho (yugo ryoiki kenkyu kaihatsu). 1. Cluster Science no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Studies were made on clusters which are thought to play important roles in status changes in substances (coagulation, crystallization and phase segregation) and chemical reactions (combustion, aqueous solution reaction and catalytic reaction). In the study of clusters by using infrared spectra, a method was developed to detect by using mass analyzer the cluster ion amount produced by dual resonance between resonantly enhanced multiphoton ionization (REMPI) and infrared lights. Fabrication of a Terahertz spectrometer was planned to enable high-resolution and high-accuracy observation on molecular clusters. Clusters consisting of silver atoms and ammonia molecules were successfully observed. A method was developed to investigate size dependence of cluster reactivity by using a Fourier converted ion cyclotron resonant mass analyzer. In addition, studies were conducted on clusters in liquids and aqueous solutions, clusters frozen in surface and matrix, and clusters stabilized in micro-space. 96 refs., 34 figs., 2 tabs.

  7. Fiscal 1997 report on the introductory study. Human behavior recognition evaluation technology; 1997 nendo sentan kenkyu hokokusho. Ningen kodo ninchi hyoka gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Importance of the human behavior technology was paid attention to to get true safety and comfortableness of life through adaptability of products/systems to all humans. In consideration of the social and technological background, the human behavior recognition evaluation technology avoids economic/social losses caused by accidents and troubles and also provides the safe life environment for living people including the aged. Further, the gist of the project was proposed to make it clear that it can give a course of making things from a viewpoint of development of products dealing with individuals (personal fit) and can give new added values and contribute to heightening of international competitiveness at the same time. Development is made of technology of dividing concrete behavior patterns into types and also accumulating them in usable forms at the time of product design and in emergency and of technology of measuring all the time information on human behaviors in daily life without restrictions and on site. Supporting technology is developed for making the most of behavior information of users for product design and in emergency. Effects of the spread are also estimated. 76 refs., 13 figs., 9 tabs.

  8. Japan`s Sunshine Project. 1991 annual summary of coal liquefaction and gasification; 1991 nendo sunshine keikaku seika hokokusho gaiyoshu. Sekitan no ekika gas ka

    Energy Technology Data Exchange (ETDEWEB)

    1992-07-01

    Out of the research and development on the 1991 Sunshine Project, the results of coal liquefaction/gasification are reported. The basic research of coal liquefaction/gasification is conducted. The research plan for a 150 ton/day scale pilot plant (PP) is worked out for the development of bituminous coal liquefaction technology by NEDOL process. Data of PSU (Process Support Units) operation, especially, are studied. Concerning the data obtained through dismantling of the 50 ton/day PP in Australia which uses Australian Victoria coal due to completion of its operation and also obtained from its support research, they are reflected in the design of a demonstration plant, and the results are arranged for study. Research and development on refining technology of coal-derived liquid such as Illinois coal liquid and on application technology of its products are made. For the development of coal-use hydrogen production technology, conducted is the research of a high temperature gasification PP by entrained flow bed process which is the core of the coal gasification technology. Elementary study with a 2 ton/day furnace is made for the development of the entrained flow bed coal gasification combined cycle power generation system. Also conducted are PP construction, adjusting operation and the overall research operation.

  9. Coal engineer training project for fiscal 1999. Report on general course training; 1999 nendo sekitan gijutsusha yosei jigyo. Ippan course kenshu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-11-19

    This report was made on the general course training in the coal engineer training project implemented in fiscal 1999. The training was conducted from June 7 through November 19 with total 7 participating trainees from an electric power company, mining company, etc.. In the training, the lectures were given by speakers from domestic coal related companies, universities, laboratories and the like at the University of International Resources, a foundation, for about three weeks. An English training was carried out by three instructors at the same University for about eleven weeks with the purpose of acquiring the linguistic ability required for overseas coal development. The joint seminar was conducted in Tokyo by inviting lecturers, two from Australia and one each from Canada and Indonesia. The training by visiting the domestic coal related companies was such that the overseas lecturers and trainees visited Matsushima Mining Co., the Electric Power Development Company, NKK Corp and others. The overseas study and training were performed on a 35 day schedule by visiting energy-related institutions, mining companies, railway companies, coal loading/unloading harbors, and thermal power stations in Canada, the U.S., and Australia. (NEDO)

  10. Japan`s New Sunshine Project. 1996 Annual Summary of Coal Liquefaction and Gasification; 1996 nendo new sunshine keikaku seika hokokusho gaiyoshu. Sekitan no ekika gasuka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-11-01

    In reference to the results of the research and development under the fiscal 1996 New Sunshine Project, a report was summed up on coal liquefaction and coal gasification. As to the R and D of coal liquefaction technology, researches were conducted on liquefaction characteristics and engineering properties by coal kind, catalysts for coal liquefaction, liquefaction reaction of coal and reformation utilization of the liquefied products, liquefaction reaction mechanism and coking mechanism, solubility of coal in solvent and catalytic reaction mechanism, solvent reaction mechanism by hydrogen donor solvent, etc. Concerning the R and D of coal gasification technology, made were the basic study of eco-technology adaptable gasification technology and the study of coal gasification enhancing technology. Further, as to the development of bituminous coal liquefaction technology, carried out were the study in pilot plants and the support study of pilot plants. Additionally, R and D were done of the basic technology of coal liquefaction such as upgrading technology and environmentally acceptable coal liquefaction technology, and of coal hydrogasification technology. 3 refs., 81 figs., 25 tabs.

  11. Report on achievements in fiscal 1999 on research and development of the Welfare Techno-system (Shizuoka); 1999 nendo Welfare Techno system kenkyu kaihatsu (Shizuoka) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Research and development has been performed at the Shizuoka Welfare Techno-house to assist entry into the welfare industry field of the local industries in the prefecture, such as for wood products, furniture and music instruments, and to provide products which take into consideration the society with more elderly people and less children. This paper summarizes the achievements in fiscal 1999. In developing barrier-free kitchens capable of handling change in bodily functions, a prototype kitchen was used to evaluate work load variation as a result of existence of a foot space under the kitchen table. In addition, a human simulation software was used to evaluate compatibility of humans with products. By utilizing these technical data, a system was arranged by which barrier-free kitchens can be commercialized by changing the specifications according to individual requirements. In developing a bed unit to prevent bedsore by using the multi-point pressure and fluctuation mechanism, the unit weight was reduced, and addition was made to such functions as controlling finger-pressing cycle and positions by electronic control. Development was made on a music instrument for rehabilitation by which anyone can play music by repetitively giving stimulation to human eyes and ears. (NEDO)

  12. FY 1998 annual report on the fourth international forum on environmental catalysis (IFEC 99); Dai 4 kai kankyo shokubai kokusai forum (IFEC '99) 1998 nendo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The 4th international forum on environmental catalysis, held in January 1999 in Chemical Society of Japan's Hall, had a total attendees exceeding 170, including 10 foreign attendees invited. A total of 20 papers (including 10 by foreign attendees) were presented, discussing diversified problems; 3 keynote addresses regarding (to what extent environmental catalyst can contribute); and 5 for the session of catalysts for clean processes, 6 for the session of eco-friendly chemistry, and 8 for the session of environmental catalysts for air pollution. The lectures included (global environmental problems and environmental catalysts) by Prof. Segawa of Sophia University as the opening address; solid base catalysts by Prof. Ono of Tokyo Institute of Technology in the session of (catalysts for clean processes); activation of dioxygen by transition metal complexes-new approach to highly selective catalytic oxidation with molecular oxygen by Prof. Moro-oka of Tokyo Institute of Technology in the session of (Eco-friendly chemistry; and environmental catalysts-present and future as the comprehensive review by Prof. Misono of University of Tokyo in the session of (environmental catalysts for air pollution). (NEDO)

  13. Achievement report on research and development on fusion zones in fiscal 1999. Second volume. Chemo-intelligence; 1999 nendo yugo ryoiki kenkyu kaihatsu seika hokokusho. 2. Kemo intelligence

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    With an objective to artificially realize diverse functions and structures using as a trigger the molecule recognition in living things and organisms, researches and surveys were performed on chemo-intelligence. This paper reports the achievements in fiscal 1999. In a theoretical approach to elucidate inter-molecular interactions, research was performed on hydrogen bondage, CH-{pi} interactions and stacking by using the computerized chemical method. In the design and synthesis of host molecules, development was carried out on a synthesizing method based on large ring compounds and non-ring compounds utilizing the interactions having weak hydrogen bondage, and molecular design utilizing the conformity in sizes and shapes of the molecules. In structuring the host molecules having a function to recognize neutral molecules, research was executed on capturing and activation of neutral organic molecules as the artificial host molecules. In addition, investigations were given on the latest information about separation of ionic substance recognizing compounds and their application to sensing, structure of ultra-molecular construction and the function thereof, and approaches aimed at their use as materials and applications. (NEDO)

  14. International symposium on environmental impacts of advanced alternative to CFC; CFC shinki daitai busshitsu no kankyo eikyo ni kansuru kokusai symposium hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-07

    The international symposium on environmental effects of new CFC substitutes was held in Tsukuba City, Ibaraki Pref. on February 7-9, 1996, and 19 papers were made public. In Session 1 (Plenary lecture), reports were made on Global warming and climate change: a review of recent studies; Stratospheric ozone, CFCs, and CFC-substitutes: an update, etc. In Session 2, Measurements of OH rate constants for advanced refrigerants as well as HCFCs and HFCs; The reaction rate of CFC alternatives with OH radical; Experimental and estimated rate constants: reactions of hydroxyl radicals with several halocarbons, etc. In Session 3, Measurement of uptake coefficients of some acetyl halides and fluorinated ethers into water; Mass transfer at the air/water interface: removal processes of halocarbonyl compounds; Heterogeneous reactions of fluorinated ethers on allophane or titanium dioxide, etc. In Session 4, papers were reported on model calculations relating to the global warming.

  15. Report on the 1997 Coal Engineer Training Program General Course Training; 1997 nendo sekitan gijutsusha yosei jigyo ippan course kenshu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-01

    The paper reported training in the fiscal 1997 coal engineer training course. The training was made in a period from June 9 to November 12 in terms of actual training, English training, joint seminar, visits to the related facilities in Japan, overseas training, etc. for 10 engineers from mining companies, oil companies and electric power companies. In the actual training, the following lectures were given at International Resource University in Akita prefecture: coal exploration technology, coal situation of Australia, physical/chemical characteristics of coal and the application, coal preparation technology, coal situation in India, coal situation in the U.S., trend of general coal demand, coal situation in China, coal mining technology, actual surface mining technology, coal situation in Canada, commercial English, trend of raw coal demand, coal geology, environmental protection technology related to coal utilization, etc. Overseas training, which was divided into an Australia group and a Canada/America group, was conducted for about a month. Training in Indonesia was canceled because of a large scale forest fire which broke out immediately before the start. 88 figs., 52 tabs.

  16. Fiscal 1998 'Plant Biotechnology in the 21st Century' workshop report; '21 seiki no shokubutsu biotechnology' workshop 1998 nendo seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The workshop was opened with the opening remarks by Yamada (President of Nara Institute of Science and Technology (NIST)), the overview of plant biotechnology in the 21st century from academia by Shinmyo (Professor of NIST), and the overview of such technology from Ministry of International Trade and Industry by Katao (Chief of Chemical Industry Division). Lectures and discussions of various topics were conducted for 2 days as follows. The effectiveness of a genomic DNA array method for obtaining the genes for switching genes according to daytime, nighttime, drying, salt, high temperature and low temperature for every plant. Current transfer technology of large DNA fragments into plant cell nuclei and chloroplast. Biological evaluation of the physiological functions and complex stress tolerance capacity transformed by transferring complex stress tolerance genes and useful genes for productivity improvement and value addition. Discussion was also held on the importance of a basic research for biotechnology in the 21st century. (NEDO)

  17. Evaluation report on the development of polymeric material from renewable resource using biocatalyst; Seitai shokubai wo riyoshita saisei kano shigen kara no kobunshi sozai no kaihatsu hyoka hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The project aims to develop a biocatalyst-assisted synthesizing method for efficiently manufacturing sugar containing polymers and polylactic acids which generate less environmental impact. Methods were developed using the ALP-901 originating in actinomycetes for changing esterification-shy isopropylidene glucose into vinyladipic ester and for esterifying arbutin. A study was made of the polymerization of sugar ester monomers, and a polymer with a molecular weight of scores of thousands was obtained. The biodegradability of sugar containing polymers was confirmed. Using an enzyme, a polymer with a molecular weight of 1200 was obtained. Using a lipase derived from psudomonas cepacia, a polylactic acid was obtained from lactide. A high-function polylactic acid was obtained in a reaction between methyl lactate and divinyladipate. In a reaction between butanediol and lactide, several lactic oligomers different in molecular weight were synthesized, which were then brought into reaction with divinylcarboxylic acid in the presence of an enzyme for the production of polymerizable lactic oligomers. Similarly, polymerizable lactic oligomer derivatives were obtained from glucose and lactide. The oligomers and derivatives were brought into polymerization in the presence of a radical polymerization initiator for the production of polymeric gels, respectively. (NEDO)

  18. FY 1997 research and development of fusion domains. Part 2. Studies on bionic design; 1997 nendo seika hokokusho (yugo ryoiki kenkyu kaihatsu). 1. Bionic design no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Studies were conducted on actuator function in bio materials, cells, structures, and living organisms, and on structuring a biological molecule machine. In the study on soft biological structures, biological compatibility of artificial glass bodies using ultra-polymeric PVA was found very high, raising expectation on feasibility of their practical use. Three-dimensional structure of glass bodies was made clear for the first time in the world. As a result of separating and purifying cells from a liver for the first time in the world, it was indicated that excellent proliferation performance and differentiation into cells are shown. With regard to hydroxyapatite in hard biological structure such as bones and teeth, single crystals were synthesized, and growth rate on the surface C was measured successfully. For molecular motors, studies are being performed on functions of twin-head structure in biological protein enzyme. In molecule structuring, studies were conducted on preparation of a hydrogenase LB membrane as an electric-hydrogen energy conversion element, and structuring of protein molecular structure using gene recombination. 69 refs., 37 figs., 8 tabs.

  19. Report of FY 1997 on the international cooperation project. Survey of globalization of the effective energy resource utilization technology (development of high-accuracy acceleration measurement system); 1997 nendo kokusai kenkyu kyoryoku jigyo. Energy shigen yuko riyo gijutsu kenkyu kokusaika chosa (koseido kasokudo keisoku system no kaihatsu chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This report describes effectiveness of a system for measuring the acceleration and force in high accuracy by combining a laser interference meter and a vibration stand. A possibility of pressure sensitive paper to the impact force measurement in the collision examination is also described. The results obtained in FY 1997 are as follows. For the investigation of calibration system of acceleration and force sensor, one-dimensional interferometer system has been developed, which is standardized in ISO5347 accelerometer calibration. Thus, an interference fringe processing software has been made. Moreover, construction of a three-dimensional interferometer system has been started. For the characterization evaluation of pressure sensitive papers, it was succeeded in obtaining an elasticity wave pulse maximum about 1 msec by adopting the flight body made of resin. As a result, evaluation of the force sensor in the frequency area has become possible. To calculate the displacement of a body structural material in the collision experiment, an acceleration sensor has been made for trial purposes. For the international research cooperation, the working plan of a joint research with US Texas Christian University has been concluded. 11 refs., 73 figs., 23 tabs.

  20. Fiscal 1998 research report on International Clean Energy Network using Hydrogen Conversion (WE-NET). Subtask 2. Research on promotion of international cooperation (research on standardization of hydrogen energy technologies); 1998 nendo suiso riyo kokusai clean energy system gijutsu (WE-NET) sub task. 2. Kokusai kyoryoku suishin no tame no chosa kento (suiso energy gijutsu hyojunka ni kansuru chosa kento)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report summarizes the fiscal 1998 research result on the basic research on standardization of hydrogen energy technologies, and ISO/TC197. As for the standardization, in relation to the hydrogen station in the WE-NET second phase research, the laws related to handling of gaseous hydrogen, and the basic issues on facility and safe handling were studied. As for ISO/TC197, the following draft standards were examined: Fuel supply system interface for liquid hydrogen vehicles, fuel tank for liquid hydrogen vehicles, container for liquid hydrogen transport, specification of hydrogen fuel, hydrogen fuel supply facility for air ports, gaseous hydrogen and hydrogen mixture fuel system for vehicles, gaseous hydrogen fuel connector for vehicles, gaseous hydrogen fuel tank for vehicles, and basic items for hydrogen system safety. Final examination of the fuel supply system interface for liquid hydrogen vehicles, and the specification of hydrogen fuel was finished, and these are scheduled to be registered for ISO. (NEDO)

  1. International Clean Energy System Using Hydrogen Conversion (WE-NET). subtask 2. Research study on promotion of international cooperation (standardization of hydrogen energy technology); Suiso riyo kokusai clean energy system gijutsu (WE-NET). subtask 2. Kokusai kyoryoku suishin no tame no chosa kento (suiso energy gijutsu hyojunka ni kansuru chosa kento)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This paper describes the basic study on standardization of hydrogen energy technology, and the research study on ISO/TC197 in fiscal 1996. As a part of the WE-NET project, the subtask 2 aims at preparation of standards necessary for practical use and promotion. Developmental states in every field of hydrogen energy technologies, current states of domestic/overseas related standards and laws, and needs and issues of standardization were surveyed. In particular, the needs and issues were clarified in relation to existing standards and laws from the viewpoint of specific hydrogen property. ISO/TC197 was established in 1989 for standardization of the systems and equipment for production, storage, transport, measurement and utilization of hydrogen energy. Four working groups are in action for the supply system and tank of liquid hydrogen fuel for automobiles, the container and ship for complex transport of liquid hydrogen, the specifications of hydrogen products for energy, and the hydrogen supply facility for airports. The draft international standards were proposed to the international conference in 1996. 16 refs., 21 figs., 41 tabs.

  2. Fiscal 1995 survey report on the feasibility study of the environmentally friendly type coal utilization system. Feasibility study of the environmentally friendly type coal utilization system in Thailand; Kankyo chowagata sekitan riyo system kanosei chosa. Tai ni okeru kankyo chowagata sekitan riyo system kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-06-01

    The paper surveyed the present situation and future trend of economy, energy supply/demand, coal production/distribution/utilization and the environmental effects in Thailand. The survey on the coal utilization and its environmental effects was partially requested of the environmental research institute in Thailand. The amount of coal utilization in Thailand rapidly increased to nearly four times as large as that ten years ago mainly in terms of domestic lignite under the government`s policy on expansion of the domestic energy use. However, most of this domestic lignite is low-grade coal with low calories and high sulfur content, and the use of it was rapidly increased mostly in power generation sector without no adequate environmental measures taken. This caused an environmental problem on air pollution due to sulfur oxides at Mae Moh power plant in the north several years ago, and the damages to the regional residents, etc. were given much publicity by journalism and developed the social problem. Accordingly, Thai people are now critical of the coal resource exploration and the coal use expansion. Under the circumstances, the Ministry of Industry and the energy related ministries/offices are obliged to review their development/promotion plans. 84 figs., 99 tabs.

  3. Fiscal 1995 survey of the base arrangement promotion for foreign coal import. Investigation on the policy of coal demand stabilization using low grade coal; 1995 nendo kaigaitan yunyu kiban sokushin chosa. Teihin`itan riyo ni yoru sekitan jukyu anteika hosaku ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The paper investigated the trend of and the needs for low grade coal utilization and the seeds of low grade coal utilization technology and studied usability of low grade coal in the future. Importance of low grade coal utilization was described in consideration of features of the Asia/Pacific area in the world coal market, and the trend of production/utilization of low grade coal was examined mostly in countries holding main low grade coals in the Asia/Pacific area. The trend of the technical development contributing to the low grade coal utilization was studied to make it contribute to the extraction of technologies which are regarded as effective in the Asia/Pacific area. A study was made of applicability of the low grade coal utilization technology corresponding to the needs for low grade coal utilization, and at the same time, a study was made of the effect on the coal supply/demand in the Asia/Pacific area in case the low grade coal utilization is promoted helped by the study. Focusing on technical cooperation relating to clean coal technology, a study was conducted of the trend of international cooperation in Japan and various overseas countries and the trend of new cooperation in private sectors, and a discussion was made on how Japan should act toward promotion of low grade coal utilization. 12 figs., 91 tabs.

  4. Fiscal 1996 survey report on the environmentally friendly type coal utilization system feasibility study. Feasibility study of the environmentally friendly type coal utilization system in Thailand; Kankyo chowagata sekitan riyo system kanosei chosa. Tai ni okeru kankyo chowagata sekitan riyo system kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The paper investigated and studied the present situation and future trend of coal utilization and distribution in Thailand, and the present situation of environmental effects and the measures taken for environmental protection. Around 2010, coal will probably be produced only at EGAT`s Mae Moh (MM) coal mine. Demand for overseas coal is expected to be 40-50 million tons in 2011, and preparation of the coal center becomes a subject. For general industry use coal, pretreatment such as coal preparation, coal blending and briquetting is needed, considering coal quality, usage, transport distance and environmental effects. Brown coal of MM coal mine is a lignite with high sulfur, high ash content and low heating value. Wide spread of its use can be expected if upgrading is possible such as desulfurization, deashing, increasing heating value. In the electric power generation field, the absorber was installed at the existing boiler of the mine-mouth generating plant to conduct a verification test on high grade desulfurization of ultra-high sulfur lignite. In the industry field, the circulating fluidized bed boiler was adopted. In the residential/commercial field, introduction of briquette was proposed. 80 refs., 84 tabs.

  5. Fiscal 1996 survey report on the environmentally friendly type coal utilization system feasibility study. Feasibility study of the environmentally friendly type coal utilization system in the Philippines; Kankyo chowagata sekitan riyo system kanosei chosa. Philippines ni okeru kankyo chowagata sekitan riyo system kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Grasping the present situation of coal utilization technology in the Philippines, the paper proposed a feasibility study of introduction of the environmentally friendly type coal utilization system which seems to be needed in the future. (1) Introduction of the environmentally friendly type coal utilization system in the electric power generation sector: there are only four full-scale running coal thermal power plants in the Philippines. In the future, several coal thermal plants are planned to be constructed by 2005, but for the new installation, it is desirable to adopt fluidized bed boilers with wide application to coal kinds. In case of 0.3-1.0 million MW class plants, it is planned to adopt high grade import coals, and it will be natural to fire pulverized coal. For the processing of flue gas, it is a must to install desulfurization facilities and smoke/soot removal devices. (2) Utilization/development of domestic low grade coals: at the mine-mouth generating plant, it is necessary to investigate the economically minable amount of coal, confirm productivity, survey coal quality, etc., and select boiler. As to coal briquetting technology, it is necessary to examine coal quality for tests and make a thorough study of what technology is most suitable. 50 figs., 78 tabs.

  6. Fiscal 1996 survey report on the environmentally friendly type coal utilization system feasibility study. Feasibility study of the environmentally friendly type coal utilization system in Malaysia and Vietnam; Kankyo chowagata sekitan riyo system kanosei chosa. Malaysia Vietnam ni okeru kankyo chowagata sekitan riyo system kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This survey arranged the status of coal utilization technology and the status of coal production, supply, etc. in Malaysia and Vietnam, examined/studied coal utilization systems in both countries, and finally assessed feasibility of introducing the environmentally friendly type coal utilization system. As a country of primary energy source which is abundant in crude oil, natural gas, hydroelectric power, coal, etc., Malaysia now depends on crude oil and natural gas for 80% of its energy, and places emphasis on exploration of natural gas and oil refining. In electric power and cement industries where coal is consumed, effectiveness and environmental issues in association with coal utilization are future subjects. In Vietnam, the north is abundant in hydroelectric power and anthracite, and the south in oil and gas resource, but the north and central districts are in a state of undevelopment. Coal is used for coal thermal power generation, cement industry, and residential/commercial fuel. In the future, effective coal utilization and environmental issues will be subjects. 16 refs., 38 figs., 75 tabs.

  7. Fiscal 1995 survey report on the feasibility study of the environmentally friendly type coal utilization system. Survey on the environmentally friendly type coal utilization system in the coal preparation sector in China; Kankyo chowagata sekitan riyo system kanosei chosa. Chugoku no sentan bumon ni okeru kankyo chowagata sekitan riyo system ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-06-01

    Specifying the coal preparation technology among clean coal technologies (CCT) in China, the paper investigated governmental policies, plans, standards of coal preparation technology, subjects, etc. toward the introduction/spread of coal preparation technology, and studied decision, introduction and spread of the coal preparation system suitable for the coal utilization status in China. The survey was conducted in Shanxi and Henan Provinces which are main provinces of coal production, and field survey was made at some selected coal preparation plants having different operational conditions. In the field survey, problems on the operation were extracted, and points of improvement were studied at the same time. Further, to grasp the positioning of coal preparation in CCT in China, survey was carried out on laws and regulation on coal preparation in terms of energy and environmental policies. Finally, the result of the field survey was analyzed, a coal preparation system of which the introduction/spread in medium- and long-term are enabled was proposed considering the coal utilization status and economic situation in China, and how to introduce/spread it was studied. 35 figs., 42 tabs.

  8. Test and survey on a next generation coal liquefying catalyst. Coal molecule scientific test and survey as the base for commercializing the coal liquefying technology; Jisedai sekitan ekika shokubai shiken chosa. Sekitan ekika gijutsu shogyoka kiban to shite no sekitan bunshi kagaku shiken chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The test and survey on a next generation coal liquefying catalyst present a new proposal to raise catalytic activity in coal liquefaction, and perform demonstration experiments in a laboratory scale to search for possibility of developing a new coal liquefying catalyst from various viewpoints. To explain, discussions were given on the catalyst to perform the followings: liquefaction under extremely mild conditions by using ultra strong acids not limited only to metals; ion exchange method and swell carrying method to raise catalyst dispersion very highly, enhance the catalytic activity, and reduce the amount of catalyst to be used; mechanism of producing catalyst activating species to further enhance the activity of iron catalysts; and pursuit of morphological change in the activating species. The coal molecule scientific test and survey as the base for commercializing the coal liquefying technology performed the studies on the following items: pretreatment of coal that can realize reduction of coal liquefaction cost; configuration of the liquefaction reaction, liquefying catalysts, hydrocarbon gas generating mechanism, status of catalysts after liquefaction reaction, and reduction in gas purification cost by using gas separating membranes. Future possibilities were further searched through frank and constructive opinion exchanges among the committee members. (NEDO)

  9. Trend survey of the global environment adaptation type industry technology. Feasibility study on CO2 global recycling system by using natural energy; Chikyu kankyo tekiogata sangyo gijutsu doko chosa. Shizen energy ni yoru CO2 global recycle system no kanosei-chosa

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    The paper studies a global CO2 recycling system which combines utilization of natural energy and CO2 recovered from combustion of fossil fuel. In the model, CO2 recovered at the place of energy demand is transported to the place where energy is produced, and from the CO2 fuels are synthesized by use of solar energy and transported to the place of energy demand. Facilities worth a large amount of money are required to transmit electric power generated by the photovoltaic power generation in the desert to the fuel synthesizing plant. Therefore, production of electrolytic hydrogen by the on-site power generation and transport by pipe may be considered. As a synthetic fuel being sent back by ocean transport, methanol is considered, and synthetic methane (LNG) can also be a candidate. CO2 is recovered as liquid carbon dioxide. Possibility of CO2 recycling is dependent on development of the desert solar base, as well as depletion of fossil fuel and price increase, CO2 penalty. It has still been difficult to say which of the fuel synthesis, CO2 tanker or securing of the solar base becomes a bottleneck. Entry of recycling fuels to the market will be possible in proportion to restrictions on fossil fuels, and evaluation of the system depends almost on the rate of energy arriving from the energy-producing region. 112 refs., 70 figs. 36 tabs.

  10. Investigation of the creation of functional surfaces and the recent development in related researches. 2. Investigation of the development of new isolation/refining systems in water system; Kokino hyomen no sosei to shintenkai no kenkyu doko chosa. 2. Suikei ni okeru atarashii bunri seisei system no kaihatsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    Propositions were made concerning new chromatography and membrane separation techniques wherein a command control material is used, the mobile phase is fixed upon water, and the fixed phase is caused to vary by external commands, and how to develop the said techniques into a project was discussed. New methods were also introduced, capable of separating water systems and, particularly, capable of separating and refining, without damaging their functions, bionic elements such as proteins, genes, and cells, which encouraged discussion on the future of the said project. As for command controlled materials, detailed investigations were conducted into materials responsive to physical stimulation such as light, electric field, magnetic field, or heat and materials responsive to PH and chemical or biochemical substances, and discussion was made on the structures and characters of the said materials. Concerning the manufacture of a command controlled surface, consideration centered particularly about the density and thickness of command controlled molecules to be introduced onto the surface. Furthermore, the current state and problems were discussed regarding chromatographic separation and refining of optical isomers, nucleic acids, physiologically active substances, peptides, cells, etc. 252 refs., 75 figs., 31 tabs.

  11. Report for fiscal 1998 on Simple Operation Type CAD/CAM System Development through International Cooperation. Report on the achievements of counterparts overseas; 1998 nendo 'kan'i sosagata denshi sekkei seian shien system no kaihatsu ni kansuru kenkyu kyoryoku' ni kansuru hokokusho. Kaigai counter part seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Concerning the subject matter, achievements of China, Indonesia, Malaysia, Singapore, and Thailand are reported. In China, a technical data transfer process is under development, designed to serve between CAD (computer-aided design)/CAM (computer-aided manufacturing) packages of different file formats. In Indonesia, WG1 activities are being conducted with the assistance of Toyota Motor Corporation, and WG3 activities with the assistance of Wacoal Corporation, Japan. In Malaysia, designing, development, and tests are under way for prototype systems of an electronic catalog, direct link to CAD/CAM, transfer and sharing of electronic manufacturing data, etc., all to be completed by March 1999. In Singapore, an electronic parts library is compiled, and a verification test is conducted involving response time, download time, etc. In Thailand, development is under way of an engineering browser, automobile industry-oriented WEB-based information center, etc. (NEDO)

  12. Fiscal 1997 report on the results of the R and D on the invention of high-level combustion technology using the microgravity environment; 1997 nendo seika hokokusho (bisho juryoku kankyo wo riyoshita kodo nensho gijutsu soshutsu ni kansuru kenkyu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For the purpose of achieving both the diversification of energy resources and the reduction in environmental pollutants in fuel exhaust gases, the paper conducted elucidation of combustion phenomena using microgravity facilities and research on combustors which make high-level combustion possible. In the experimental study using microgravity experimental facilities, conducted were evaluation experiments on combustion/evaporation of fuel droplets and droplet groups, elucidation/evaluation experiments of combustion characteristics of high-density fuels, evaluation experiments of flammability limit, and elucidation/evaluation experiments of emission mechanisms of NOx, etc. Analysis/evaluation of the data obtained and elucidation of the combustion mechanism were conducted. Further, by applying the results of the microgravity experiment, the high-level combustor experimental facilities were fabricated, and validation tests were started. In the international joint research with US`s NASA, the following were conducted using JAMIC`s facilities and NASA`s 2.2 second drop tower: study of mutual interference of droplet series combustion, study of binary system fuel droplet series combustion, study of combustion characteristics of solid fuels, study of behavior of flames around the lean flammable limit, etc. 151 refs., 253 figs., 7 tabs.

  13. Report on the results of efforts for fiscal 1997. Development of technologies for creating high-quality crystal materials for low-loss power control devices; 1997 nendo seika hokokusho. Teisonshitsu denryoku seigyo soshiyo kohinshitsu kessho zairyo sosei gijutsu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Basic technologies are developed for the manufacture of high-quality crystal materials large in diameter and homogeneous in property which will allow power control semiconductor devices to grow more sophisticated in function and to be lower in the loss they suffer. Physical properties of molten semiconductor and the like are measured accurately, which include surface tension, density, viscosity, electric conductivity, thermal conductivity, emissivity, diffusion coefficient, vapor pressure, heat capacity, contact angle, and solid solution equilibrium distribution coefficient. In computer-aided simulation, as in the previous year, simulation codes are developed for the analysis of flow, temperature distribution, and diffusion behavior in the gas phase; simulation codes are developed for the analysis of 3D unsteady thermal flows in the melt; and a main program is developed which governs experimental calculations. As for experiments in model Czochralski crucibles, small crucible are used in which experiments are conducted in the temperature range of normal to 200degC for the acquisition of experimental data for verification. Measured by use of the model crucibles are the temperature distribution in the bath, the surface flow speeds, and the flows inside the melt. 140 refs., 153 figs., 10 tabs.

  14. Research report for fiscal 1998. Research into the feasibility of exchange of studies for the development and promotion of global environment-related industrial technologies; 1998 nendo chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo. Kenkyu koryu kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The above was conducted by Research Institute of Innovative Technology for the Earth (RITE). Worldwide collaboration is mandatory for the settlement of environmental problems for the earth, and RITE is positively promoting its interaction with research institutes abroad. In fiscal 1998, it sent research teams to government organizations and research institutes in Europe and America for studies there. A study in Europe involved the preparation of chemicals from CO2 by virtue of novel biotic reactions, and RITE's microbial molecular function laboratory plans to start a leading study in fiscal 1999. In relation with environmental impact reducing technologies using sunlight-aided photocatalysts, visits were paid to three research institutes in America. RITE itself has developed a powdered semiconductor catalyst and is engaged in the study of producing hydrogen by decomposition of water using solar energy. Concerning the production of saccharides out of farm wastes remaining unused, researches were made into the feasibility of joint studies with some advanced research institutes in America. Discussions were made about the performance- and stability-related improvement of enzymes usable for the decomposition of biomass, the analysis of biological environmental circumstances that substance yielding microbes find themselves in under anaerobic conditions, etc. (NEDO)

  15. Fiscal 1996 verification survey of geothermal exploration technology. Development of the fracture type reservoir exploration method (development of the elastic wave use exploration method); 1996 nendo chinetsu tansa gijutsu nado kensho chosa. Danretsugata choryuso tansaho kaihatsu (danseiha riyo tansaho kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of exploring accurately fracture groups greatly restricting the fluid flow of geothermal reservoirs, technical development was made for applying the elastic wave exploration technology such as the high precision reflection method, VSP, elastic wave tomography to the geothermal exploration. The Okiri area, Kagoshima prefecture was selected as a demonstrative field of a typical type where the steep and predominant fracture rules the geothermal reservoir, and experiments were conducted using the high precision reflection method and VSP. Fracture models were made, and the analysis results were studied by a survey using the array CSMT/MT method and by a comparison with existing data. Reformation of the underground receiving system used for VSP and elastic tomography is made for improvement of its viability, and was applied to the VSP experiment. The treatment/analysis system of the core analyzer was improved, and cores of the demonstrative field were analyzed/measured. Further, the exploration results, core analysis results and existing data were synthetically analyzed, and fracture models of the demonstrative field were constructed. Also, effectiveness and viability of the elastic wave use exploration method were studied. 90 refs., 418 figs., 24 tabs.

  16. Studies on transmission property changes of optical fibers inside an OPGW heated by conducting or discharge currents; OPGW tsuden/hoden kanetsu ni yoru hikari denso tokusei hendo no kento (sodensen kanshi hoho no chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    Yamashita, I.; Seikai, S.; Takenaka, T. [Kansai Elecatric Power Co. Inc., Osaka (Japan)

    1999-09-30

    Temperature of OPGW's is known to increase due to thunderbolt. Therefore, the measurement of transmission characteristic changes of optical fibers inside the OPGW is seems to be useful method to supervise the electric power sending systems. Candidates for the detectable characteristics are optical loss, Brilloum frequency shift and Raman scattering power because distribution of these changes can be measured by OTDR techniques. In this experiments, those properties are investigated using a high voltage supply system at the Central Research Institute of Electric Power Industry. A test OPGW containing 24 fibers including 22 single-mode and 2 multi-mode fibers is installed with a span length of 20m. In the current conducting test, the OPGW is heated up to 250 degree C through three times conduction of 6kA with each duration time of 600 or 700ms. In the discharge current test, electric charge of 50C(coulomb), 100C and 200C with 20ms duration are applied. The results of the experiments are summarized as follows. The optical loss change is negligible small except for the fiber brake case and the Brilloum frequency shift is not always suitable because the sensitivity is small. The temperature measurement by the Raman scattering observation using the multi-mode fibers is found to have enough sensitivity and accuracy. However, residual problem is to increase the sensitivity of it for single mode fibers. (author)

  17. Feasibility study for international collaboration on photovoltaic power generation and long-distance energy transmission technologies utilizing desert areas environment; Sabaku chiiki wo riyoshita taiyoko hatsuden chokyori yuso gijutsu ni kakawaru kokusai kyoryoku kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    A workshop was held at Tokyo in March, 1997 on the research and development and feasibility study for international collaboration on photovoltaic (PV) power generation and long-distance energy transmission technologies utilizing desert areas environment. Two speakers from the USA, one from Italy, and two from China were invited, and four speakers in Japan presented papers. A total of 48 persons participated. In the technical sessions, `World energy demand and PV system potential` by Prof. Kurokawa, `Long distance transmission of PV power` by Mr. A. Invenizzi, `Case studies of large scale PV systems distributed throughout desert areas of the world` by Mr. Hirasawa, `Linking renewable energy resources around the world` by Mr. P. Meisen, `Properties of large scale PV plant in the USA` by Mr. J. Benner, `Future prospect of PV electrification in China` by Mr. Kong Li, `Application of large-scale PV systems in deserts in China` by Mr. Isomura, and `Effects of large-scale PV power plant in a climatic desert areas` by Prof. Ihara were presented. 38 refs., 62 figs., 29 tabs.

  18. Application of magnetotelluric method to hydrocarbon exploration. Case study of MT survey in Yurihara oil and gas field, Akita prefecture; MT ho no kokunai sekiyu tanko eno tekiyo. Akitaken Yurihara chiiki ni okeru jikken chosa kekka

    Energy Technology Data Exchange (ETDEWEB)

    Mitsuhata, Y.; Matsuo, K.; Ishikawa, H.; Tanaka, H.; Nakagami, K. [Japan National Oil Corp., Tokyo (Japan). Technology Research Center

    1996-10-01

    The experiment and survey were carried out to verify the effectiveness and limitation of MT method. The previous seismic reflection method is unsuitable for steep terrain and over-folded complicated geological structure. In such difficult areas, application of MT method is increasing as complement or substitution for the reflection method. However, the evaluation of resistivity structure interpretation for every area is slightly difficult because of lack of data, poor quality of data, and no verification data at boreholes. Consequently, the survey was again carried out in well-known Yurihara oil and gas field, Akita prefecture whose geological structure has been surveyed in detail at boreholes, by adding new 32 sites, 22 sites on the south side and 10 sites on the north side of the measuring line extending from east to west. As a result, it was clarified that the lower high-resistivity layer found by MT method is equal to the Nishikurosawa basaltic layer, and basalt extends to the west in the north area. This result can`t be simply compared with the previous geological profile. 8 refs., 8 figs.

  19. International exchange project for the engineer exchange project (in coal mine technology area) in fiscal 1998. Pre-survey in Europe; 1998 nendo gijutsusha koryu jigyo (tanko gijutsu bun'ya) kokusai koryu jigyo. Jizen chosa (Oshu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This survey in Europe surveyed the current status of the coal industry, supporting directions and policies of governments on the coal industry, and summarized the information thereof. The survey included movements in policies and activities in transfer of technologies to overseas countries by governments and corporations of different countries, and the current status of the coal technology training project. The survey covered Britain and Germany. The British coal industry is facing a serious difficulty because the electric power industry being the major coal purchaser has changes its sourcing to natural gas. In addition, the open-cut mining which has been considered high in productivity has no further hope of big progress due to regulations in the environmental aspects. However, as a result of having performed positively research and development on production cost reduction, the production efficiency has grown excellently. Using this situation as the base, positive advancement into overseas countries is being carried out. The German coal industry has, in spite of having reduced the production size and the number of coal mines, shifted coal purchasers to electric power generation and steel making areas, and its quality and supply capability stand equivalent to those of imported coals. (NEDO)

  20. Fiscal 1999 survey report. Part 2. Research study on restraint of carbon dioxide generation by green chemistry; 1999 nendo green chemistry ni yoru CO{sub 2} hassei yokusei ni kakawaru chosa kenkyu. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    In connection with green chemistry, a concept of bringing paradigm shift to chemical technologies as something that makes reduction in environmental load compatible with economic activities; surveys were made this year on the developments of fine chemicals from renewable resources such as cellulose among the cases of developing chemical substances/products to be called 'green chemicals' reducing environmental load; developments of surfactants produced by certain microorganism, plastic additives with reduced pollutant loads, particularly fire retardants and environmentally benign reactant solvents; concept of green chemistry in the development of chlorofluorocarbon-alternatives; and up-to-date technological level concerning a design method of chemical materials and an estimation method for chemical safety using quantum chemistry calculation. In regard to the chemical materials and products intrinsically containing a certain level of risk, R and D should be reinforced and accelerated in the future on the alternative materials/products reducing their toxicity. In this case, along with the importance of discussing compatibility of technological possibility with economical adaptability, sociological study seems to be necessary in incorporating environmental load reduction into economic evaluation. (NEDO)

  1. Investigational study of evaluation of the global energy system as a global environmental protection technology; Chikyu kankyo taisaku gijutsu toshite no global energy system no hyoka ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    With relation to some global energy systems of which viability is predicted in the future, an evaluation was conducted from the viewpoints of economical efficiency, energy balance, CO2 emission, etc. The fossil fuel CO2 capture system, the conventional thermal power plant added with CO2 recovery/treatment facilities, is expected to reduce approximately 70-75% of the CO2 emission. The fossil fuel decarbonated hydrogen system, which decarbonates fossil fuels, recovers/treats CO2 at the place of fuel supply and uses as hydrogen, is of poor practical application from an economical point of view. The fossil fuel methanol synthesis system, which synthesizes methanol from fossil fuels at the place of fuel supply, generates electric power and recovers/treats CO2 with the methanol, is large in energy loss and CO2 emission and low in overall efficiency and CO2 reduction effect at the time of methanol synthesis. The renewable energy hydrogen system is an ultimate system with no emission of CO2, though it costs much. 110 refs., 83 figs., 107 tabs.

  2. Fiscal 1998 engineer interexchange project (coal mine technology field). Preliminary survey on the international interexchange project in America; 1998 nendo gijutsusha koryu jigyo (tanko gijutsu bun'ya) kokusai koryu jigyo. Jizen chosa (Beikoku)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    As a part of the fiscal 1998 international interexchange project in a coal mine technology field, the survey was made in America. Geological engineering problem has large effect on the protection and productivity of underground coal mines. Promotion of long wall mining has contributed to reduction of disasters, however, recently deaths due to roof collapse and wall collapse are on the increase. A roof evaluation technique was developed for adequate selection of mining methods and support design, and its standardization and diffusion are in promotion. Integration and improvement advanced in facility technology because of worldwide integration by acquisition of coal mine facility manufacturers. Introduction of high-power high-capacity facilities is increasing with introduction of large long wall working faces, and development of rear transport system technology and labor saving by remote control are also in promotion according to such trend. As automation and labor saving technology of mining facilities, the automated direction detection and control system by laser and gyroscope is under development. (NEDO)

  3. Survey of history/succession of industrial technology. Book of survey of the domestic industrial technology which contributed greatly to the industrial development; Sangyo gijutsu rekishi keisho chosa. Sangyo no hatten ni okiku kiyoshita kokunai sangyo gijutsu no chosahen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper surveyed a history of the industrial technology development which contributed to the innovation of technology in Japan for contribution to the future selection of technical themes and decision on developmental methods. In accordance with the increasing contribution of the Japanese industrial technology to scientific and economic activities in Japan and abroad, it is important to clarify a historical significance of the industrial technology and to make the most of results of the survey for the future succession/development of industrial technology. The survey focused on chemical processes brought up as the Japanese industrial technology which is regarded as world-famous and on the systematical study of the history of the Japanese scientific technology. Hereafter, this becomes a guiding principle for engineers. The paper arranged the survey results of production processes of 2-ethylhexanol, acrylic acid, acrylamide, and cresol/resorcinol, optical resolution process of amino acids, and flue gas desulfurization process. The paper also surveyed technologies of ammonia synthesis, coal liquefaction, high polymer film production and synthesis of medical raw materials. The results were obtained which are suggestive for developing creative/original technology. 210 refs., 93 figs., 49 tabs.

  4. Study on construction of temporary dwellings and problems caused by living long time on Hanshin-Awaji Great Earthquake; Hanshin / Awaji daishinsai ni okeru okyu kasetsu jutaku no secchi to chokikan shiyo suru baai no kadai ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    Takahashi, K.; Nakamura, Y. [Nagasaki Univ. (Japan)] Shimizu, Y. [Kumagai Gumi Co. Ltd., Tokyo (Japan)

    1998-10-20

    Two years after the above-titled earthquake, an examination was performed on inhabitants in the temporary dwelling houses in Kobe, center of the calamity, and problems caused by a long stay there were clarified together with a grasp of the evolving problems by comparing the result of survey carried out immediately after the disaster. The number of such temporary dwelling houses amounted to 29,128 within Kobe City and 3,168 outside of the city. According to the room arrangement, they were either one f 4 types : 2-rooms with a kitchen, 1 room with a kitchen, dormitory and those specifically for aged persons. There were 59,449 applications at the first offer of 2,702 houses. The priority of their assignments and so on are explained. As for the housing structure, numerous complaints concerned with the room temperature, noise and so forth. As for the living environment, lack of nearby commodity shop, omission of transportation access, ill drainage of the housing sites were pointed out and the matters of demand to the local authorities included the installation of mail post and street lights. As for the health management, insomnia, stiff shoulder, lumbago and other bad physical conditions were revealed. The financial difficulty and the high house rent were obstacles to migrate to other places. The prolonged temporary lives worsened the apprehension of dwellers for the earthquake, typhoon, fire and alike. Some features for the calamity are described in comparison with the result of survey on those who were compelled to live under similar conditions by the eruption of Mr. Fugen. 6 refs., 13 figs., 15 tabs.

  5. Development of a vehicle capable of traveling on soft ground. Its application to investigation, survey and management of soft ground; Nanjakuchi sokosha no kaihatsu. Nanjakuchi deno chosa sokuryo kanri eno tekiyo

    Energy Technology Data Exchange (ETDEWEB)

    Kimura, R.; Yano, H. [Ministry of Construction, Tokyo (Japan)

    1998-07-25

    An experimental vehicle is built and tested, which utilizes hovercraft technology, capable of travelling on a soft ground surface and therefore usable in reclamation work. When the ground is soft and viscous, merely increasing the vehicle driving force will futilely add to the vehicle weight, and this causes an adverse effect with the vehicle sinking deeper into the ground and the ground presenting higher resistance. In an effort to decrease the weight and resistance, a vehicle is built, capable of levitating itself by use of hovercraft technology and provided with retractable tracks and wheels for travelling. The targets are mostly attained in the test run, as far as speeds (5.5km/h at the maximum across a muddy ground section) and trekking across ground including an undulated surface are concerned, although the levitation level is found to be somewhat lower than the design value. Operating across a hard ground surface with the body elevated, the vehicle exhibits a higher performance in speed and drivability when the hovercraft effect is utilized. When travelling on the hovercraft effect, the frictional resistance of the skirt decreases as the vehicle moves from a hard surface section into a soft surface section, and this allows the vehicle to run more smoothly at higher speeds. 1 refs., 6 figs.

  6. Development of atmospheric diffusion evaluation method incorporating thermal and topographical effects (2). Chikei, netsuteki joken wo koryo shita haigasu kakusan no suchi model no kaihatsu (2); Chikei wo koryo shita taiki nagare no yosoku shuho no chosa

    Energy Technology Data Exchange (ETDEWEB)

    Sada, Koichi; Ichikawa, Yoichi.; (Central Research Inst. of Electric Power Industry, Tokyo, Japan)

    1989-08-01

    The development condition of turbulent models which has been introduced until now and their applicability for atmospheric diffusion forecasting was presented in this paper. The turbulent flow diffusion model is required for the forecasting, of which model calculates diffusion utilizing atmospheric turbulence, because atmosphere is the flow field with strong anisotropy. This flow field can be estimated by Mellor-Yamada model. When two equation models ({kappa} - {epsilon} model etc) based on eddy viscosity concept are used, the mehtod is required, which estimates direction turbulent flow quantity by the result of measurement for turbulent by mean of modification of the model, because the turbulent to be forecasted is isotropy. In order to approximately estimate complicated topography condition, adoption of general coordinate system is most suitable. It requires establishment of meshes before the calculation is done, however linear interpolation method can establish the meshes for various topography and at the same time it is applicable for the calculation of atmospheric flow as a practical method. 71 refs., 7 figs., 6 tabs.

  7. International measures project for rational energy use (Survey project of the analysis tool of Asian energy consumption efficiency). List of errata; 1998 nendo kokusai energy shiyo gorika nado taisaku jigyo seigohyo. Asia energy shohi koritsuka bunseki tool chosa jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The list of errata was prepared for the data book of the international measures project for rational energy use (Survey project of the analysis tool of Asian energy consumption efficiency). Corrected pages of the data book 1 (1990) are as follows: 187-190, 223-226, 259-262, 295- 298, 369-370, 387-388 and 405-406 on Malaysian data. Corrected pages of the data book 2 (1985) are as follows: 102-105 on Chinese data, 154 on common data, and 187-190, 223-226, 259-262, 295-298, 369-370, 387-388 and 405-406 on Malaysian data. (NEDO)

  8. Survey for making a data book related to the development of new energy technology (the photovoltaic power generation); Shin energy gijutsu kaihatsu kankei data shu sakusei chosa (taiyoko hatsuden)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    A data book related to the photovoltaic power generation was made as a part of the systematical preparation of new energy related data. The paper arranged the importance of introducing the photovoltaic power system and the CO2 reduction effect at levels such as the government, local government, industries and individuals which are users. Described were the production quantity by region/type/company, shipment by usage, production amount and prices of solar cells. Arranged was the situation of policies on the photovoltaic power generation in Japan and developed countries. Examples of the introduction in countries including Japan were examined to know the introduction quantity and target. The paper introduced the subsidy system, preferential tax system and loan system for the introduction of the photovoltaic power system in Japan. The flow was summed up from the planning of the system introduction to the installation. The status of handling with the system introduction of government related organs and local governments was stated. The paper showed a list of the companies related to the photovoltaic power system and the references of solar cell makers and solar system installation makers. The development is so quickly made that the renewal every year of the system and the quality enhancement are required. 32 figs., 112 tabs.

  9. Exploration of shallow subsurface resistivity structure using a portable TEM system: TEM-FAST prosystem; Kan`igata TEM ho sochi TEM-FAST prosystem ni yoru senbu hiteiko chosa

    Energy Technology Data Exchange (ETDEWEB)

    Miura, Y.; Kumekawa, Y.; Takasugi, S. [GERD Geothermal Energy Research and Development Co. Ltd., Tokyo (Japan)

    1997-05-27

    Discussions were given on effectiveness of the TEM-FAST ProSystem which is a portable TEM system developed recently for use in exploration of shallow subsurface resistivity. The system consists of a loop type antenna, the TEM-FAST as the main equipment, and a host computer, the host computer controlling the entire system. The system acquires transient response data in secondary induced magnetic fields lasting 4 {mu} sec to 1 m sec. The number of data is 5490 stacks in one measurement, and the data acquisition time is about three minutes. Measurements were carried out by using the TEM-FAST in the vicinity of a well, whose results were compared with those of electric logging, and discussions were given on them. Although the electric logging results had no data available for depths shallower than 35 m, the measurement results from the TEM-FAST were found highly harmonious with those of the electric logging. In addition, there were transmission and telephone lines in locations about 10 m away from the well during the measurement, but extremely high data quality was discovered. 6 refs., 7 figs., 1 tab.

  10. Development of the EM tomography system. Part 2. Sensitivity studies of anomalous body by model studies; EM tomography system no kaihatsu. 2. Model kaiseki ni yoru ijotai no kando chosa kekka

    Energy Technology Data Exchange (ETDEWEB)

    Kumekawa, Y.; Miura, Y.; Takasugi, S. [GERD Geothermal Energy Research and Development Co. Ltd., Tokyo (Japan); Arai, E. [Metal Mining Agency of Japan, Tokyo (Japan)

    1997-05-27

    A model analysis was used to investigate sensitivity of a two-dimensional structure on a resistivity anomalous body by using an electromagnetic tomography system. The resistivity model handled a three-dimensional structure. The model was prepared as a pseudo two-dimensional model in which a low resistivity anomalous body with 1 ohm-m was incorporated that has a basic length of 1000 m in the Y-direction in a homogenous medium having 100 ohm-m. As a result of the analysis, the following matters were elucidated: if a low resistivity anomalous body is present in a shallow subsurface, its impact starts appearing from lower frequencies than when the anomalous body exists only at a greater depth; if a high resistivity anomalous body exists, the detection sensitivity is lower than for the low resistivity anomalous body, but the analysis would be possible by using the phase because the phase has made a greater change; the source TxZ shows a change from lower frequencies than for the source TxX, and the amount of change is greater, hence the detection sensitivity on an anomalous body may be said higher with the source TxZ; however, for the anomalous body in shallow subsurface, the source TxX is more effective since it is not subjected to a too great impact at a greater depth. 5 refs., 7 figs.

  11. Research on the general analytical method of fossil fuel cycle from a viewpoint of the global environment. 3; Chikyu kankyo kara mita sogoteki kaseki nenryo cycle bunseki hyoka shuho no chosa. 3

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The general analysis/assessment method of a fossil fuel cycle was studied. Seven kinds of power generation plants such as LNG cycle and coal cycle ones, and four kinds of transport and treatment systems of recovered CO2 such as ocean and underground systems were studied as case studies on life cycle analysis. As data necessary for life cycle analysis, the database was constructed which stores the facilities and operational energy required for a total energy system from mining of fossil fuel to treatment of recovered CO2, and the quantity of environmental waste such as CO2 emission. As a result, the decrease rate of energy balance defined as ratio of input energy to power plant output was estimated to be 14-43% and 20-60% in LNG cycle and coal cycle, respectively. Even if the recovery rate of CO2 in power plants reached 80-90%, reduction of total CO2 emission was limited to only 20-40% because of CO2 emission during mining, liquefaction and transport of fuel. 168 refs., 48 figs., 102 tabs.

  12. Stress estimation around the survey wells in Hanshin-Awaji area by means of AE/DR and DSCA experiments; AE/DR ho to DSCA ho ni yoru Hanshin Awaji chiiki chosa kui shuhen no chikaku oryoku sokutei

    Energy Technology Data Exchange (ETDEWEB)

    Ito, H.; Kuwahara, Y.; Nishizawa, O. [Geological Survey of Japan, Tsukuba (Japan); Yamamoto, K. [Tohoku University, Sendai (Japan). Faculty of Science; Sano, O. [Yamaguchi University, Yamaguchi (Japan). Faculty of Engineering; Yokoyama, T.; Kudo, R. [OYO Corp., Tokyo (Japan); Xue, Z. [Kiso-Jiban Consultants Co. Ltd., Tokyo (Japan)

    1996-05-01

    A total of 5 wells were excavated in the Hanshin-Awaji area (Ikeda, Takarazuka, Tarumi, Hirabayashi and Ikunami) to collect the core samples, which were analyzed by the AE/DR and DSCA methods to determine crustal stresses. For the AE/DR analysis, the core sample was cut in the vertical direction, and in the horizontal direction at intervals of 45{degree}. The sample of unknown orientation was provided with a datum line common for both methods, to compare the results by these methods. A load was applied to the sample, provided with an AE sensor and strain gauge on the sides, in the longitudinal direction. For the DSCA analysis, the core sample was cut into a cube having a side length of 33mm, with a pair of planes directed in parallel to the datum line. A total of 18 strain gauges, 10mm in gauge length, were attached to the cube. The AE/DR analysis gave the maximum and minimum principal stresses in the horizontal plane and stresses in the vertical direction, whereas the DSCA the maximum, intermediate and minimum principal stresses. 3 refs., 7 figs.

  13. Leading research in FY 1995. Research of product evaluation and advanced measurements - Part 1 (product evaluation); 1995 nendo sendo kenkyu. Seihin hyoka kodo keisoku bunseki gijutsu ni kansuru chosa kenkyu - 1 (seihin hyoka)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Product evaluation has been investigated from a viewpoint of compatibility with human life by considering human being as the subject of life. This report describes the investigation results. Product evaluation is defined as evaluating products on a consumer-oriented viewpoint and informing consumers of the evaluation results. According to a questionnaire survey with regard to daily living products, products in the low degree of satisfaction in their usage were electric tooth brush, video camera, electric rice jar, vacuum cleaner, and electric iron. Contents of dissatisfaction with these products were classified by aspect, i.e., human aspect regarding human body/recognition, life aspect regarding functions of products and how to use them, and sensitivity aspect such as appearance of products. Thus, points at issue were clarified. As regards the human aspect, incompatibility between the size/form of products and human body/posture, and recognition psychological incompatibility such as difficulty in understanding function or operation of products were pointed out. Establishment of a method for measuring and evaluating the human`s body functions and the compatibility with products, and necessity of the acquisition of human`s body characteristic data and the consolidation positions are also described. 4 refs., 42 figs., 30 tabs.

  14. Investigation on brittle fracture of high bridge pier by Hyogoken-Nanbu earthquake; Hyogoken nanbu jishin ni yori chukokan ramen kyokyaku ni shojita zeisei hakai o gen`in chosa

    Energy Technology Data Exchange (ETDEWEB)

    Eto, O.; Mihara, T. [Kubota Corp., Osaka (Japan); Miki, C. [Tokyo Institute of Technology, Tokyo (Japan). Faculty of Engineering

    1998-04-21

    During the Hyogoken-nanbu earthquake, Ikuta Bridge for railway was not broken but severely damaged. The steel bridge piers were fractured. The Ikuta Bridge was constructed with two steel rigid frames at its ends and two reinforced concrete rigid frames at its center with a three-span 50 m long steel girder in 1967. During the earthquake, the steel pier at the western end was moved in 1 m toward north, and the movable support and pier at the western end were fractured. At the eastern end, the fixed support and the pier were not damaged, but the RC pier of the support base was fractured. To clarify the cause of damages and the fracture mechanism, dynamic response analysis, static elasto-plastic analysis, observations of fracture faces, and material tests were carried out. As a result, it was considered that the brittle fracture of centrifugal cast steel bridge piers of Ikuta Bridge was caused by the horizontal impact exceeding the bearing force for fractures over the piers after the initial fracture of movable support at the western end. From the observations of fracture faces, peeling tests of paints, and hardness tests, it was suggested that the fractures of cast steel piers were initially generated at the yield stress level. 3 refs., 16 figs., 6 tabs.

  15. Survey on high-level application of new-functional metal hydride (MH) to industrial equipment; Shinkino suiso kyuzo gokin no sangyo kiki eno kojigen tekiyo ni kakawaru doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    A survey of research and development overseas and in Japan was conducted on application of metal hydride (MH) to new-functional industrial equipment such as actuators which make good use of properties of MH. An MH actuator manufactured based on a new movement principle is useful as welfare equipment in terms of its big power generated, light-weight and quiet motion. MH can raise and lower heavy matters by release and absorption of hydrogen gas. In the example where the MH actuator is used for raising and lowering the seat portion of the wheelchair, a total weight of the rise/fall portion of the wheelchair seat was found to be approximately 5 kg including that of the battery. As to welfare equipment and tools which are expectedly commercialized by using MH actuators, considered are an aid lift for taking a bath, a western-style toilet seat with a function of helping stand-up, a bedsore preventing bed, a device aiding motions of fingers/elbows, etc. Besides the welfare equipment, considered are force display for presenting force information, a small-size muscular reinforcement training device, ocean robot needing high power and low speed, etc. 72 refs., 110 figs., 28 tabs.

  16. Investigations on a global environment improving technology utilizing biological functions. 2. Structuring a ligno-bioprocess; Seibutsu kino wo riyoshita chikyu kankyo kaizen gijutsu ni kansuru chosa. 2. Riguno bio process no kochiku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Discussions were given to reserve global environments on reducing dependence on fossil resources and more effectively utilizing wood resources. Economically utilizable amount of wastes from lumbering factories reaches about five million tons annually. Discussions were made on a ligno-bioprocess that uses these wastes. The current quantitative production efficiency of cellulase by means of bacterial breeding is very high. A problem is production of ligninolytic enzymes, to which application of the recombinant DNA method is indispensable. Combination of steam explosion with biological decomposition or the organosolv process is an effective method for lignin decomposition. Decomposition of cellulose by using the ultra critical water method is worth noticing. With respect to hemicellulose utilization, production of cellulose derivatives, biodegradable polymers and oligosaccharides would be conceivable by means of esterification and etherification. Vanillinic acid, adhesives, resins and lignin-based polymer materials could be manufactured from lignin. Material cost for these products accounts for about 35% of the product price, thus making the lignochemicals promising commercial products. 301 refs., 71 figs., 39 tabs.

  17. Fiscal 1996 survey of potential international cooperation for a long-term scenario on CO2 reduction; 1996 nendo CO2 sakugen ni kakawaru choki shinario ni kansuru kokusai kyoryoku kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of working out a CO2 reduction scenario and a CO2 policy introduction scenario, a survey was conducted of comparisons between ten and several models which are world-known and models of the New Earth 21, potential international cooperation to be carried out in the future, etc. The survey included organizations which are developing CO2 policy evaluation models, survey reports made in the past, details of literature for the analysis and arrangement. From the result, details of the questionnaire survey and organizations to be surveyed were decided on for the questionnaire survey. Objects for the survey were 7 countries and 22 organizations, and survey items were places for information exchange, sending/receiving of researchers, exchange of input data, comparative calculation based on the common database, joint research work, economy, the carbon tax, impact, renewable energy, how to handle and think of the carbon isolation, etc. As a result of the survey, proposed were a workshop on CO2 reduction, a comparative study of simulation models, etc. 25 refs., 50 figs., 12 tabs.

  18. Investigation of techniques for analyzing and evaluating the effects of newly developed new-energy and energy-saving technologies; Shinsho energy gijutsu kaihatsu koka no bunseki hyoka shuho ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    For the comprehensive and rational evaluation of technologies related to new energy and energy saving, investigations have been conducted about the history and trend of related policies and technological development. Japan saw a great change in the demand-supply structure in 10 to 15 years following the first oil crisis when oil was partially replaced with atomic energy and LNG and energy-saving efforts came into practice. However, the diversification of energy sources by developing new energies and improvement on the self-sustenance rate remain far from success. Related policies both in Japan and overseas are shifting from the conventional efforts for stable supply and economic growth to the handling of deregulation and environmental problems. Energy stratagem has been studied, not regarding energy technology as a mere economic task and working out how the demand for energy should be with the restricted resources, social economy, and environments, taken into account. Models and scenarios are proposed, for the quantitative analysis and evaluation of the energy stratagem wherein the development of technologies for new energy and energy saving are positioned clearly. Especially, concepts emphasized therein are the technique of power source planning and the development of regenerative energy. 24 refs., 32 figs., 15 tabs.

  19. Review of methods for long term monitoring of the environmental effects of geothermal development (hot spring). part 2. Chinetsu kaihatsu ni kakawaru choki kankyo monitoring donyu chosa. 2 (chikasui onsen(center dot)suishitsukei). ; Data sheet shu

    Energy Technology Data Exchange (ETDEWEB)

    1990-03-01

    Pertaining to the geothermal development, this is a data sheet collection of domestic and foreign review documentation to establish environmental monitoring system. Global chemistry and physics review comprise examples in Shikano Hot Spring in Tottori Prefecture, deep portion in Shimosuwa region, etc. Hydrologic fluidization study of geothermal water system explained Kakkonda, Matsukawa, Sengan region, Asaseishikawa fault, Tateshina highland, Hakone Yumot, Beppu, etc. Apart, simulation is being made by geothermal structure model. As for the content of hot spring water, there are review results from Noboribetsu, Izu/Hakone, Shimabara, Beppu, etc. Relation between the discharge flow rate of hot spring and rainfall quantity comprises examples in Onikobe, Kusatsu, etc. As for the influence of hot spring development, secular statistic is made of the dynamic water level, temperature and quality of hot spring in Aomori, Bunpi, etc. Influence review of power generation plant installation comprises reports from Hatchobaru, Onikobe, Onuma, Mori, etc. Regarding the geothermal development and environmental assessment, study is made of the scenery, water quality, atmospheric pollution, land subsidence, hot spring exhaustion, change in hydrothermal system, etc. Foreign examples were also explained. 121 figs., 14 tabs.

  20. International Clean Energy System Using Hydrogen Conversion (WE-NET). subtask 2. Research study on promotion of international cooperation; Suiso riyo kokusai clean energy system gijutsu (WE-NET). subtask 2. Kokusai kyoryoku suishin no tame no chosa kento

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This paper describes the research result on promotion of international cooperation in the WE-NET project in fiscal 1996. The WE-NET project aims at development of the total system for hydrogen production, transport, storage and utilization, and construction of the earth-friendly innovative global clean energy network integrating elemental technologies. Since the standpoint is different between latent resource supplying countries and technology supplying countries, the WE-NET project should be constantly promoted under international understanding and cooperation. The committee distributed the annual summary report prepared by NEDO to overseas organizations, and made positive PR activities in the 11th World Conference and others. The committee made the evaluation on the improvement effect of air pollution by introducing a hydrogen vehicle in combination with Stanford University, and preparation of PR video tapes for hydrogen energy. Preliminary arrangement of Internet home pages, establishment of a long-term vision for international cooperation, and proposal toward the practical WE-NET are also made. 9 figs., 13 tabs.

  1. Worldwide clean energy system technology using hydrogen (WE-NET). subtask 9. Investigation of innovative and leading technologies; Suiso riyo kokusai clean energy system gijutsu (WE-NET). subtask 9. Kakushinteki sendoteki gijutsu ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The WE-NET Project is a long-term project designed to ensure that an energy network technology using hydrogen becomes a reality not later than 2020. So the project cannot remain effective unless constant efforts are made to foresee future trends of technology and optimize it as the making of entire system for the project. In this project, new technologies which are not up for development are also investigated. Their feasibility should be studied, if necessary. From the foregoing point of view, new technologies are studied, collected and evaluated. Thus, useful suggestions and proposals may be made as to the course for the project to follow, as well as its research and development. Proposals highly evaluated up to FY 1995 are the hydrogen-oxygen internal-combustion Stirling`s engine, hydrogen production by solid oxide electrolysis, magnetic refrigeration technology for liquefaction of hydrogen, solar thermal hydrogen production with iron sponge technology, and hydrogen producing technology with photocatalyst. Conceptual investigation themes in FY 1996 are the hydrogen internal-combustion Stirling engine, solar thermal hydrogen production, phototransformation process, and high-temperature steam electrolysis. 9 figs., 54 tabs.

  2. Investigation on comparative studies relative to the world oil market models used at Energy Modeling Forum (EMF). EMF ni okeru sekai sekiyu shijo model ni kansuru hikaku kenkyu ni tsuite no chosa

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S. (The Institute of Energy Economics, Tokyo (Japan))

    1994-01-01

    The Energy Modeling Forum (EMF) has established a working group comprising researchers and policy operators delegated from the three sectors of the government, academic world, and private businesses. The working group has advanced comparative studies relative to the world oil market models during 1991 to 1992, and compiled the 'International Oil Supplies and Demands, EMF REPORT 11'. This paper introduces its summary. The group has selected 11 models from the existing oil market models, and given developers of these models with 12 kinds of common premises to perform scenario analyses. Some of the results of comparisons and analyses on the 11 times 12 kinds of simulation results may be quoted as follows: a common trend has been observed that the Middle East dependency will increase; overseas supply source dependency will increase rapidly in major energy consuming countries (the dependency in the U.S.A. will increase from 1/3 in 1988 to 2/3 in 2010); and estimations on demands and prices up to 2010 were diversified, clearly reflecting differences in viewpoints. 2 refs.

  3. Report on a survey in fiscal 1999. Supplementary survey on research and development of carbon dioxide fixation and effective utilization technologies utilizing bacteria and algae (the survey on feasibility of bio-technologies to create economic effects, such as the biological CO2 fixation technology); 1999 nendo saikin sorui nado riyo nisanka tanso koteika yuko riyo gijutsu kenkyu kaihatsu futai chosa. Keizaiteki koka wo soshutsusuru seibutsuteki CO{sub 2} koteigijutsu nado no biotechnology no kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Bio-technologies including the biological CO2 fixation technology, or the green bio-technologies (GBT) are the technologies indispensable in realizing the change to a resource circulating and environment harmonizing society that accompanies economical growth, or in other words, the 'sustainable development'. In quantifying the feasibility of these technologies, the GBTs that contribute to creating Japan's international competitive power and employment were specified, and an approach to establish the realization target in 2010 was adopted, upon identifying the general condition of the related markets inside and outside the country. The GBT is the technology that makes the best use of Japan's independent strength created by combining the enzyme engineering and fermentation engineering with the 'genome science' (HEART). The targets are to substitute four million kiloliters of petroleum with a resource circulation type energy generated by the bio-technology; apply the bio-technology to about 30% of products and processes produced or used in Japan's chemical industries; and aim at creating markets by using environmental measurement and analysis, treatment of hard-to-decompose substances, and supports on tree planting as the three pillars. A simulation on return on investment in GBT business suggests the effect of promoting PFI. (NEDO)

  4. Report on the project for spread/promotion of technology for the industrial waste optimized treatment in the Asian region (International Symposium `98); Asia chiiki sangyo haikibutsu tekiseika shori gijutsu nado fukyu sokushin jigyo (symposium kaisai) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In Japan and Asian countries, the optimized treatment of industrial waste is the problem with the economic growth. Border-crossing movement of the waste for promotion of the renewable use is also a problem. Therefore, the International Symposium `98 on the industrial waste problem in the Asian region was held. China, Thailand, the Philippines and Korea were invited to Japan to give lectures. MITI of Japan reported on the present situation of Japan and the cooperation with Asian countries. The industrial circle reported on efforts for environmental protection measures to be taken, the industrial waste problem at companies which advanced into Asian countries, effects of the Basel Convention on recycling activities, Japan`s role in Asia, etc. In the panel discussion, promotion of cooperation for recycling technology and Japan`s support for formulating strategy on the industrial waste were requested to Japan, and the construction of an Asian area network was proposed. Concerning the cooperative system between governments and private companies, it was concluded that it was necessary to discuss it considering the actual state of each country. Importance of recycle and information exchange was realized again. 10 refs., 15 figs., 27 tabs.

  5. Report on the project for spread/promotion of technology for the industrial waste optimized treatment in the Asian region; Asia chiiki sangyo haikibutsu tekiseika shori gijutsu nado fukyu sokushin jigyo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The International Symposium `98 on the industrial waste problem in the Asian region was held in Tokyo on February 18, 1998. MITI commented on the present situation of the industrial waste problem in Japan and Japan`s environmental tackling toward the Asian region, and also Asian countries (China, the Philippines, Thailand and Korea) made reports. Japan reported on environmental preservation measures taken in the industrial circle, the industrial waste problem at companies which advanced into Asian countries, effects of the Basel Convention (which restricts border-crossing movement of harmful wastes) on recycle activities, Japan`s role in Asia, etc. In the panel discussion, discussions were made on human interchange in the informatization, recycling technology, shortage of personnel concerned with environmental protection, construction of a network in the Asian region and Japan` s role, etc. As to the treatment system for waste, the necessity was recognized of studying systems which meet with actual states of each country. It is also necessary to go on with discussing how the system should be for cooperation between governments and private companies. Importance of the recycle and information exchange was emphasized. 10 refs., 14 figs., 27 tabs.

  6. FY 2000 report on the results of the development of technology of a human behavior adaptable life environment creation system; 2000 nendo ningen kodo tekigogata seikatsu kankyo soshutsu system gijutsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The R and D were conducted of the on-site measuring technology for human behavior and physiological condition in driving behavior and manufacturing behavior, technology of comprehension/storage of the details of behavior, behavior assisting technology, etc., and the FY 2000 results were summed up. As to the development of driving behavior measuring technology, driving simulator, eye glancing object detecting system, driving stimulation system, etc. were developed, and characteristics of driving behavior in using these were analyzed. The structure of driving behavior database was also studied. In relation to the development of the manufacturing behavior adaptation technology, a system for measuring movements of the upper half of the body and hands/fingers in sewing work was developed, and a comparative study was made between skilled workers and unskilled workers by behavior decomposition. Further, about the manipulator work, skills were examined, and patterns of the revolution speed of shovel were analyzed. As to the NC machine work, points of skills and how to convey skills were surveyed at plant site. (NEDO)

  7. FY 1999 report on the results of the development of the technology to establish an economical chemical recycling system for waste polyester resin; 1999 nendo seika hokokusho. Hai poriesuteru jushi no keizaiteki na kemikaru risaikuru system kakuritsu no gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the purpose of establishing a chemical recycling system for PET bottles (saturated polyester resin) of which the recovery amount is expected to increase in future, the R and D were made for establishment of a chemical recycling system, and the FY 1999 results were summarized. In the R and D of an economical treatment process by waste polyester resin decomposition/synthesis system, the information was obtained that the acid value of the decomposition liquid is suitable as the control index for determining the finish of the decomposition process, and the acid value of the synthesis liquid is suitable as the control index for determining the finish of the re-synthesis process. In the demonstrative study of physical properties/quality stabilization of the re-synthesized resin, conditions for operation with no very big dispersion in physical properties of re-synthesized resin such as viscosity and acid value were obtained. In the demonstrative study of a recovery/recycling system of low cost PET bottles, the area for recovery was expanded to Shirahama town and Yuasa town in addition to Tanabe town that recovered bottles in the previous fiscal year, and the recovery amount totaled 3 t/mo. As to the development of the application of the recycled resin, the recycled resin which has the quality at least equal to virgin resin in cutting processability was obtained, and products such as septic tank were trial-manufactured. (NEDO)

  8. FY 2000 Report on the results of development of technology to establish economic chemical recycling system for waste polyester resin; 2000 nendo hai polyester jushi no keizaitekina chemical recycle system kakuritsu no gijutsu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Described herein are the results of the FY 2000 efforts for establishing a chemical recycling system for waste PET bottles, including construction of 100t/y demonstration plant, development of economic decomposition and re-synthesis process, and demonstration of a low-cost recovery and recycling system with the cooperation of surrounding municipalities. The program for development of an economic treatment process for waste polyester resin achieves reduction in decomposition and re-synthesis time. The program for re-synthesized resin quality produces buttons of the recycled resin and evaluates their properties, to demonstrate that they satisfy the quality standards. The program for demonstration of the recovery system with the cooperation of surrounding municipalities recovers 4t/month of waste PET bottles by 9 municipalities, and estimates/evaluates final economic efficiency of the total recycling system, including plant operating cost and recycled resin selling cost. The program for development of applicable areas for the recycled resin produces various products on a trial basis with the cooperation of chemical makers, and opens the exhibitions. (NEDO)

  9. Achievement report for fiscal 1998 in developing technology to establish economical chemical recycling system for waste polyester resin; 1998 nendo hai polyester jushi no keizaitekina chemical recycle system kakuritsu no gijutsu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    Research and development has been performed with an objective to establish an economical waste PET bottle recovering and regenerating system. In the research of waste polyester resin decomposing conditions, researches were made by using a small five-liter testing machine on methods to decide the condition of completing the decomposition of PET bottle flakes, and methods to decrease the decomposition time, whereas it was verified that the decomposition is possible in one hour after temperature has been risen under a constant temperature condition. In the research of re-synthesizing conditions, experiments have verified that re-synthesis of PET bottle decomposed liquid into unsaturated polyester by means of acid can be performed under a constant temperature condition. Based on these achievements, design, construction, and trial operation of a plant with treatment capacity of 100 tons a year were executed between January and May, 1999, by which possibility of regenerating high quality unsaturated polyester resin was identified. With regard to the waste PET bottle recovering system, discussions were given on a system to sort and recover wastes at the first wastes generating points under coordination with neighboring cities, towns and villages, where the recovery amount of one ton a month was achieved as planned originally. (NEDO)

  10. Achievement report for fiscal 1998 on the research and development of environmental technologies such as recycling. 2. Technology for reducing automobile running noise; 1998 nendo recycle nado kankyo gijutsu kenkyu kaihatsu seika hokokusho. 2. Jidosha sokoon teigen gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Experiments and studies are conducted for reducing along-the-road automobile running noise. In the study of noise generation due to tire vibration, it is found that the main mechanism of noise generation on a well-drained pavement is the vibration of tires. A calculation model is built for estimating the vibration of the tire belt from the characteristics of the road surface and the tire. In the study of air column resonance in the tread groove, a method is studied of measuring fluctuations in the sound pressure in the tread groove. Measurement is conducted, and it is found that the generally accepted explanation, in which air column resonance is attributed to tread vibration generated upon collision of the tire with the road surface, needs further study for substantiation. In a model experiment, it is found that air column resonance hardly occurs on a well-drained pavement. In the study of hydroplaning, it is found that, even when the total volume of the tread longitudinal grooves is the same, the hydroplaning performance tends to improve when the groove arrangement and crown curvature are proper. (NEDO)

  11. Research cooperation report for fiscal 1997 on the environment-friendly system for effectively utilizing water resources; 1997 nendo kankyo taiogata mizushigen yuko riyo system ni kansuru kenkyu kyoryoku itaku gyomu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This effort exerted in cooperation with the Philippines aims to solve problems related to water resources such as stable supply and pollution of water through developing a waste water treatment/water reuse system which is easy to operate and maintain, and low in price. The ultimate goal includes (1) the construction of a waste water treatment/water reuse system comprising an anaerobic reaction tank and activated charcoal absorption tower, easy to operate and maintain, and low in price, (2) the employment of goods procurable in the Philippines, the goods including carriers for use in the anaerobic reaction tank, microbes for use in both aerobic and anaerobic reaction tanks, and activated charcoal for use in waste water reutilization, and (3) the establishment of optimum operating conditions for the waste water treatment/water reuse system by use of a pilot plant and the transfer of operating and managing techniques to the Filipino counterpart. In this fiscal year, investigations are conducted to disclose the actualities of waste water treatment and water consumption by primary industries in the vicinity of Laguna de Bay, and the waste water to be the object of study and the place of pilot plant installation have been selected. Also conducted are investigations into the carrier, microbe, activated charcoal, etc., for use in the anaerobic reaction tank. (NEDO)

  12. 1998 Annual Study Report. Research and development of power storage by high-temperature superconducting flywheels (research and development of permanent magnet); 1998 nendo seika hokokusho. Koon chodendo flywheel denryoku chozo kenkyu kaihatsu (eikyu jishaku no kenkyu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    The permanent magnets have been investigated and developed, for eventual commercialization of a 10 MWh power storage system by high-temperature superconducting flywheel. The permanent magnet rotors have been already developed in the previous years using a praseodymium-based magnet (Pr magnet) and neodymium-based sintered magnet (Nd sintered magnet), and the target rotational speed of 30,000 rpm has been attained. For development of the magnetic circuit to produce a stronger and smoother magnetic field, magnetic flux density of the Nd sintered magnet is measured. It shows a lower magnetic flux irregularity than the Pd magnet, but there is still room for further improvement. For development of large-size permanent magnet fabrication techniques, it is confirmed that the large-size Nd sintered magnet can be easily magnetized by partial magnetizing, as is the case with the Pr magnet. In this year, the irregular magnetic flux is three-dimensionally simulated, based on the results obtained in the previous years, to find that the simulated results are in good agreement with the observed ones. The measures to solve the problems are also investigated. It is also confirmed that the large-size ring magnet can be easily magnetized by partial magnetization. (NEDO)

  13. Report on result 1998. Research and development on fusion area. Part 3 (biomolecular mechanism and design); 1998 nendo seika hokokusho. Yugo ryoiki kenkyu kaihatsu daisan bunsatsu (bimolecular mechanism and design)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    An organism is a molecular mechanical system consisting of nucleic acid, peptide and protein having a self-forming and a self-repairing function. For the purpose of creating cells, tissues and molecular mechanism alternating these biological functions, their basic technology was developed. Concretely, studies were made on three-dimensional cellular structural module engineering and biomolecular mechanism and design. Studies on biological soft tissue resulted in success by giving atmospheric glow discharge treatment to the inner surface of a tubular PVC. An artificial vitreous body was created using PVA hydrogels. In addition, liver cells were successfully cultured for the first time in the world. Studies on biological hard tissue revealed that osteopontin plays a role of a trigger for the initial differentiation of the osteoblast cell. Further, a basic experiment was carried out on the initial response of the cartilage cell. In the research on the molecular mechanism, examination was made on the mechanism of a double-head molecular motor. Examination was also made on the adjustment of the hydrogenase LB film as an electricity/hydrogen energy conversion element and on the biomolecular mechanism and design. (NEDO)

  14. Achievement report for fiscal 1998. Research and development of synergy ceramics (Development of technology for energy use rationalization); 1998 nendo seika hokokusho. Shinaji ceramics no kenkyu kaihatsu (energy shiyo gorika gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The aim is to create inorganic materials with their functions well harmonized and with their reliability remarkably improved, and efforts are made to establish basic technologies with which structural control may be carried out simultaneously for multiple layers in in-process products through positive utilization of various chemical reactions in the materials synthesizing process. This fiscal year's achievements are stated below. A low-temperature pressure nitriding method is developed in which nitriding reaction directly involves the metal aluminum compact for conversion into ceramics, and an aluminum sintered body is produced capable of high thermal conduction of not less than 170w/mk with the original compact shape retained. By a heat treatment in a high-temperature pressure nitriding atmosphere, a success is attained in producing a silicon nitride ceramic body enhanced (150w/mk) in thermal conduction. It is clarified that the microwave-aided selective heating technology works effectively in enhancing the particle growth rate in a liquid-phase sinter system, and a success is won in increasing strength by virtue of the formation of particle-growing particles. (NEDO)

  15. FY 2000 Project of developing international standards for supporting new industries. Standardization of systems for detecting gene recombination products; 2000 nendo shinki sangyo shiengata kokusai hyojunka kaihatsu jigyo seika hokokusho. Idenshi kumikae seihin kenshutsu system no hyojunka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Described herein are the FY 2000 results of the studies on the basic conditions for gene recombination products, and methods of determining content of the purchased gene recombination products in agricultural products, conducted to promote the standardization of the gene recombination product detection systems. Soybean is taken up as the gene recombination product to be studied, in which the samples containing the gene recombination product at 5, 0.5, 0.1 and 0% are prepared, and qualitatively analyzed by the DNA extraction and PCR method. No band is detected. For the quantitative examination by the real-time PCR method, the SYBRGeen, Taqman and hybridization probe methods are used to study the PCR conditions. The sample DNA extracted by the DNA Extraction kit for GMO Detection Ver.2 from the sample containing the RoundupReady{sup TM} soybean is quantitatively analyzed by the real-time PCR method for GMO content, which has produced the results for promotion of the standardization. (NEDO)

  16. FY 1996 result report. Research/development on the creation of high-grade combustion technology using a microgravity environment; 1996 nendo seika hokokusho. Bisho juryoku kankyo wo riyoshita kodo nensho gijutsu soshutsu ni kansuru kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    With the aim of creating high-grade combustion technology which can respond to the decrease in environmental pollutant in combustion exhaust gas, the high-grade combustion technology research development committee was established inside JSUP (Japan Space Utilization Promotion Center), using the underground gravity-free test center. Following FY 1995, the following were conducted: (1) international joint research with NASA, and (2) tests using microgravity test facilities, etc. and analysis/evaluation of the test data. As to the international joint research, a lot of new information was obtained through the adjustment conference with NASA. Further, there were a lot of results obtained from joint tests and researches. Moreover, the leading experimental device and measuring device which are usable in the microgravity field were developed/prepared. Conducted were combustion/evaporation evaluation experiments on fuel droplet and groups of droplet, combustion characteristics elucidation evaluation experiments on high-density fuels, evaluation experiment on flammability limits, and elucidation evaluation experiments on emission mechanism of NOx, etc. Through those, abundant experimental data were able to be accumulated, and a lot of precious knowledge/information were obtained. Besides, the fabrication of high-class combustor test equipment for ground demonstration was started. (NEDO)

  17. Fiscal 1998 research report. R and D on advanced combustion technology under microgravity environment; 1998 nendo seika hokokusho. Bisho juryoku kankyo wo riyoshita kodo nensho gijutsu soshutsu ni kansuru kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Research was made on explication of a combustion phenomenon by using a microgravity facility, and a combustor possible to realize advanced combustion technology. In the basic research composed of 5 themes by the international joint research with NASA, 52 drop experiments using JAMIC's facility and 100 drop experiments using NASA's 2.2s drop tower were carried out. The themes are composed of an interaction in droplet arrays combustion, combustion of binary fuel sprays, combustion characteristics of solid fuel, flame dynamics around a lean flammability limit, and mass transfer around a combustion field. In the experiment using the microgravity experiment facility and analysis evaluation of the experimental data, studies were made on combustion and evaporation of fuel droplets, combustion characteristics of dense fuel, flammability limit, formation mechanism of NO{sub x} and an advanced combustor. For applying a pre-evaporating/pre- mixing combustion system to a combustor for aircraft engines, studies were made on some issues such as improvement of a combustion stability, NO{sub x} discharge characteristics, and optimum fuel atomizing. (NEDO)

  18. Fiscal 1999 achievement report. Development of technologies for creating high-quality crystalline materials for low-loss power control devices; 1999 nendo teisonshitsu denryoku seigyo soshiyo kohinshitsu kessho zairyo sosei gijutsu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Researches are conducted for the advancement of, and loss reduction for, semiconductor devices for controlling electric power. Physical properties of molten semiconductors etc. are accurately measured in a microgravity environment and computer simulations are performed, which are for the production of larger-diameter, higher-quality semiconductor crystal materials. In the measurement of physical properties of molten semiconductors etc. carried out at JAMIC (Japan Microgravity Center) free-fall facilities where a high-quality microgravity environment is available, measurements are made of the surface tension, density, viscosity index, heat conductivity, and vertical spectral factor of the molten silicon. Solubility is measured of silica, silicon nitride, and silicon carbide, and, in equilibrium with these, the oxygen, nitrogen, and carbon in molten silicon, and highly reliable data are obtained. As for the comprehensive analysis code developed under this subject, the X-ray image data of the surface of a solid solution, collected from a crystal growing in a small Cz furnace at the NEC Fundamental Research Laboratories, and data of oxygen concentration in the silicon crystal agree excellently with the result of calculation, which suggests that the code is reliable. (NEDO)

  19. Interim report on the research development of high combustion technology using the microgravity environment; Bisho juryoku kankyo wo riyoshita kodo nensho gijutsu soshutsu ni kansuru kenkyu kaihatsu chukan hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    There are problems on diversification of energy from a viewpoint of energy stabilized supply and reduction of environmental pollutant in fuel exhaust gas. For the solution, combustion phenomena are elucidated using microgravity equipment, and a combustor which enables high combustion technology is studied. For it, a field survey is conducted on implementation of international joint research with the U.S.` NASA, and at the same time experiments and analyses of the experimental data are carried out using microgravity experimental equipment. For experiments using microgravity experimental equipment and analysis/evaluation of experimental data, the following were conducted: (1) evaluation of combustion properties of various fuels, (2) fabrication of equipment needed for experiments for analysis/evaluation of combustion parameters, and combustion/evaporation evaluation experiments of fuel droplet/droplet group using microgravity experimental equipment, evaluation experiment to elucidate combustion property of solid particle mixed fuel, evaluation experiment of combustion limit, etc. In fiscal 1993, experimental data are being acquired for establishing a target experimental method. 42 refs., 151 figs., 1 tab.

  20. Fiscal 1993-1998 integrated research report. R and D on advanced combustion technology under microgravity environment; 1993 - 1998 nendo sogo seika hokokusho. Bisho juryoku kankyo wo riyoshita kodo nensho gijutsu soshutsu ni kansuru kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For developing advanced combustion technology by using JAMIC's facility, the advanced combustion technology research committee supported by researchers of universities, national institutes and industries was prepared in JSUP, and R and D using a microgravity experiment facility and the international joint research with NASA were carried out. By using the advanced experimental equipment and measuring instrument developed for microgravity experiments, studies were made on combustion and evaporation of fuel droplets, combustion characteristics of dense fuel, flammability limit and NO{sub x} generation mechanism, and such precious results were obtained as storage of abundant experimental data, explication of a combustion mechanism, preparation of a database and find of new phenomena. In the ground verification experiment using the newly fabricated advanced combustor test equipment, various data effective for developing high-efficiency low-pollution combustors were obtained. Through the joint research with NASA including 5 themes, various results and the real relationship between the researchers were also obtained. (NEDO)

  1. FY 1996 Report on the industrial science and technology research and development project. R and D of brain type computer architecture; 1996 nendo nogata computer architecture no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    It is an object of this project to develop an information processing device based on a completely new architecture, in order to technologically realize human-oriented information processing mechanisms, e.g., memory, learning, association of ideas, perception, intuition and value judgement. Described herein are the FY 1996 results. For development of an LSI based on a neural network in the primary visual cortex, it is confirmed that the basic circuit structure comprising the position-signal generators, memories, signal selectors and adders is suitable for development of the LSI circuit for a neural network function (Hough transform). For development of realtime parallel distributed processor (RPDP), the basic specifications are established for, e.g., local memory capacity of RPDP, functions incorporated in RPDP and number of RPDPs incorporated in the RPDP chip, operating frequency and clock supply method, and estimated power consumption and package, in order to realize the RPDP chip. For development and advanced evaluation of large-scale neural network silicon chip, the chip developed by the advanced research project is incorporated with learning rules, cell models and failure-detection circuits, to design the evaluation substrate incorporated with the above chip. The evaluation methods and implementation procedures are drawn. (NEDO)

  2. Generalized report on the research cooperation promoting project. Research cooperation related to the mine waste water treatment technology utilizing biotechnology; Kenkyu kyoryoku suishin jigyo sokatsu hokokusho. Bio riyo ni yoru kohaisui shori gijutsu ni kansuru kenkyu kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This paper is a generalized report in relation with the mine waste water treatment technology utilizing biotechnology, from among the promotion projects for research cooperation with China. Ferric iron (Fe{sup 3+}), which precipitates at low pH, is produced by utilizing bacteria which derives energy from oxidizing ferrous iron (Fe{sup 2+}) in the waste water, and the iron is precipitated and removed by using low-cost calcium carbonate as a neutralizing agent. Joint researches and developments have been carried out on selection of optimal kinds of bacteria, cultivation of bacteria oxidizing iron at high efficiency, optimal removal system of heavy metals in mine waste water, and recovery of useful resources. Japanese engineers were sent to sites in China, Chinese researchers were received in Japan, and pilot plants were operated and studied. For the purpose of proliferating and enlightening the result of the project, a seminar was held in Beijing in February 1998. In order for the achievements derived up to fiscal 1998 to be used in diverse fields, fiscal 1999 will carry out follow-ups, including assistance, for the voluntary researches performed by China. The follow-ups will also include confirmation on the state of testing the iron oxidizing bacteria technology, technical guidance, and analyses and discussions on the data. (NEDO)

  3. FY 1990 report on the development of wood-waste/agri-waste pyrolytic gasification technology and utilization technology of gas product; 1990 nendo mokushitsukei haikibutsu no netsubunkai gas ka gijutsu to seisei gas no riyo gijutsu kaihatsu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-03-01

    It is urgently necessary for the Philippines, which has no promising energy source to replace imported oil and lacks hard currencies, to reduce dependence on oil. The country, consisting of a number of islands, has faced many difficulties in construction of large-scale power transmission grids covering wide areas, which greatly retard development of local industries and dissemination of electricity. Therefore, great expectations have been placed on the techniques this project plans to develop for utilization of wastes as the energy source. This 5-year project (FY 1990 to 1994) is aimed at joint research and development of (thermal decomposition/gasification and power generation system) for transforming large quantities of wood-wastes/agri-wastes left unutilized into electric power, in which thermal decomposition/gasification of the wastes is combined with gas engine/power generator systems, and thereby to establish the systems suitable for the developing country. The major R and D results obtained in FY 1990 as the initial year include negotiations with the Philippines, on-the-spot surveys for the demonstration plant sites and conditions, and conceptual designs of the demonstration plant. (NEDO)

  4. Fiscal 1993 report on results of R and D on innovative technology for producing advanced biomaterial; 1993 nendo senshin bio zairyo no sosei kako gijutsu no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    R and D was conducted on a bio-functional material that is formed by synthesizing non-natural amino acids required for the manifestation of the function, incorporating the amino acids into new bio-functional peptides to be synthesized, and fixing the peptides on a substrate such as plastics. Activities were carried out in three areas, which were (1) innovative technologies for producing functional molecules, (2) R and D on materialization technologies of functional molecules: technique of pattern formation by photochemical reaction and of fixation, and technique of preparing peptide film using vacuum thin film forming technology, and (3) comprehensive investigation and adjustment. In (1), migration stimulating activity for microphage was selected as a molecular recognition evaluation system, and on the basis of the structural analysis result of a non-peptide compound/imidazolin compound having migration stimulating activity, molecular structural design was carried out for peptides having migration stimulating activity. The result of the analysis revealed that the spatial arrangement of three phenyl nuclei and the presence of basic structures were important. Among the 22 peptides so designed, only Cbz-Phe-Phe-His-NH{sub 2} showed the migration stimulating activity. For the design, a peptide molecule design system CHARMm/QUANTA/PM3 was used. (NEDO)

  5. Fiscal 1994 report on results of R and D on innovative technology for producing advanced biomaterial; 1994 nendo senshin bio zairyo no sosei kako gijutsu no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    A material that manifests biological function is being developed by synthesizing peptide containing non-natural amino acids and by combining with a material such as a silicon substrate. Activities were conducted in the two areas of (1) development of innovative technologies for producing functional molecules (structure/function design of peptide) and (2) development of materialization technologies of functional molecules. In (1), for the purpose of developing a method of simulating the function of a low molecular weight compound by peptides, using as the lead compound, Cbz-Phe-Phe-His-NH{sub 2}, which is the minimum active manifestation unit having a macropharge migration stimulating activity, various conversions were tried with the aim of improving the activity, revealing that the activity changed greatly by the conversions. Dehydroalanine-containing tripeptide derivatives, which were synthesized on the basis of the result of a molecular design by computer, showed 1,000 times more activity than the lead compound. In (2), experiments for forming a crystal thin film of peptides were conducted using a pattern forming fixation process of peptides by a photo-reactive cross-linking reagent and by means of an organic crystal growth multiple beam apparatus. (NEDO)

  6. Report on follow-up for joint research of valuable resources recovery techniques from brackish water; Kansuichu no yuka shigen kaishu gijutsu ni kansuru kenkyu kyoryoku follow up hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This report describes follow-up for research and development on the recovery of valuable resources, such as magnesium, bromine and boron, contained in the brackish water for manufacture of common salt in the coastal region of Mexico. For the field survey, salt garden, irrigation plant and manufacturing plant of dinning salt were inspected. The optimum site was examined by assuming desalination plant and solar pond. The groundwater in coastal regions is progressively salified. Since the coastal region is a tourist resort with an round-trip area of whales, environmental protection is indispensable. For the joint research with invited researchers, the solar pond system and fresh water generation were studied. As a result, it was found that the solar pond system is an excellent method for keeping thermal energy in a low cost at the salt garden with abundant solar energy, and that the desalination system combined with distilling is the most suitable method. 7 refs., 8 figs., 1 tab.

  7. Fiscal 2000 report on result of R and D on robot system cooperating and coexisting with human beings. Development of energy conservation technology; 2000 nendo ningen kyocho kyozongata robot system kenkyu kaihatsu seika hokokusho. Energy shiyo gorika gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-06-01

    Introduction of a number of robots and consumption of a large amount of energy are unavoidable if a complicated process operation is to be carried out by robots in an extensive work site. Great energy conservation is contrived by developing robots applicable to manufacturing in performing a variety of operations in place of human beings and thereby reducing the number of robots to work. This paper explains the fiscal 2000 results. For dual-handed cooperative tasks, a function was examined capable of gripping an object without giving a humanoid robot an instruction of an exact gripping position. A method was designed to prepare a command for the other arm through a command for one arm, with torque impedance control employed for the purpose of avoiding damage due to collision. A study was conducted on a three-dimensional shape detecting model using a visual device of a robot. In grasping problems of balance control of a humanoid robot, the behavior of a robot consisting of multi-links was considered as behavior of inverted pendulum, with possibility checked for the stabilization of the balance. For the purpose of putting the virtual robot platform previously developed to practical use, a three-dimensional operation tool of run-time user interface was developed, with research conducted on the sophistication of robot application. (NEDO)

  8. Achievement report for fiscal 2000 on operational research of human cooperative and coexisting (humanoid) robot system. Operational research of humanoid robot system; 2000 nendo ningen kyocho kyozongata robot system un'yo kenkyu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    This paper reports the achievements in fiscal 2000 in the operational research of humanoid robot system. Carrying out the development smoothly and efficiently requires accumulation of the operational know-how in both of the periodical check and maintenance and the aspects of hard and software to maintain the functions and performances of the robot platform having been developed in the previous fiscal year. Checks were given on fitting of the fasteners and connectors, batteries, and sensors. Operations were confirmed and adjusted on the liquid crystal projector of the surrounded visual display system for remotely controlled operation, polarization filters, screens, reflector mirrors, and wide viewing angle cameras. Verifications were made on fitting of the arm operation force sensing and presenting system, checks on the mechanical components, and operation of the driving system, whereas no change has been found in the operation for the period of one year, and sufficient performance was identified for the remote robot operation. The virtual robot platform has presented no crash and impediments during erroneous use in the disks of the dynamics simulator and the distributed network processing system. (NEDO)

  9. FY 1998 Report on research and development project. Research and development of human-cooperative/coexisting robot systems; 1998 nendo ningen kyocho kyozongata robot system kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This R and D project is aimed at development of the human-cooperative/coexisting robot systems with high safety and reliability, capable of performing complicated works cooperatively and in a coexisting manner with humans in human working and living spaces, in order to help improve safety and efficiency in various industrial areas, improve services and convenience in manufacturing and service areas, and create new industries. The trend surveys cover humanoid robot systems, remote control systems and simulators, and the application surveys cover services for humans, basic humanoids and entertainment communication. The 1998 R and D efforts include research and development, fabrication and surveys for the following themes; (1) fabrication of robot platforms for supporting manual works, (2) development of surrounded visual display systems, (3) development of robot arm manipulation and force displaying systems, (4) development of a dynamic simulator, (5) development of a distributed software platform, (6) researches and development of computation algorithm for kinematic chain dynamics, (7) development of motion teaching system for multi-functional robots, (8) investigation of trends in robotics technology, and (9) researches and surveys of robot application. (NEDO)

  10. Achievement report for fiscal 1998. Research and development of super-functional environment-resistant materials by controlling trace metal ion implantation; 1998 nendo seika hokokusho. Gokubiryo kinzoku ion chunyu seigyo ni yoru chokino taikankyo zairyo no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The aim was to develop reliable materials high in resistance to hostile environments, greatly improved in their resistance to oxidation, abrasion, and corrosion at high temperatures. To achieve the goal, trace quantities of high melting point metals were implanted into the compound formed on the substrate surface or deep into the substrate material. This year's research and development is outlined below. Important technologies in the ion process involved materials which at high temperatures were very resistant to oxidation, abrasion, and corrosion. The high-temperature oxidation resistant material was studied for use with the automobile supercharger rotor. The study on the high-temperature abrasion resistant material involved Ti-N thin coatings: the optimization of coating conditions, slidability at room temperature, and slidability in a high-temperature atmosphere. As for the high-temperature corrosion resistant material, studies were made to use it for refuse-fueled power generation. The TiAl material was also studied: the effect of ion implantation on the improvement of its high-temperature oxidation resisting capability, analysis into oxidized alloy surface properties, ion implantation into complicatedly shaped items and the optimum material for them, and the surface treatment by ion beams for improving resistance to high-temperature corrosion. (NEDO)

  11. Fiscal 1997 report of the development of high efficiency waste power generation technology. No.2 volume. Pilot plant verification test; Kokoritsu haikibutsu hatsuden gijutsu kaihatsu (pilot plant jissho shiken). 1997 nendo hokokusho (daini bunsatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    As to a high efficiency waste power generation system using general waste as fuel, the details of the following were described: design/construction management and operational study of pilot plant, design/manufacture/construction of pilot plant, and study of an optimal total system. Concerning the construction management and operational study, the paper described the application for governmental/official inspection procedures and taking inspection, process management of pilot plant, site patrol, safety management, management of trial run of pilot plant, drawing-up of a verification test plan and test run, etc. Relating to the design/manufacture/construction of pilot plant, an outline of the pilot plant was described. The paper also stated points to be considered in design of furnace structure and boiler structure, points to be considered of the verification test, etc. As to the study of an optimal total system, the following were described: survey of waste gasification/slagging power generation technology, basic study on RDF production process, survey of trends of waste power generation technology in the U.S., etc. 52 refs., 149 figs., 121 tabs.

  12. FY 1998 result report. Research/development on the energy overall development/utilization technology of gas hydrate resource; 1998 nendo seika hokokusho. Gas haidoreto shigen no energy sogo kaihatsu riyo gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This study is aimed at studying for survey of gas hydrate (GH) deposit required for GH resource development and gathering of it, and further at studying for industrial utilization technology development of GH which is different in formation condition depending on kind of gas with which it reacts. The results of FY 1998 are as follows. In the study of the situation of existence of gas hydrate in the tundra, the sedimentary environment of the tundra where natural gas hydrate exists was simulated in laboratory to measure thermal conductivity of the sediments including GH. In this fiscal year, design/fabrication/calibration were conducted of the GH synthesizer and thermal analyzer. In the study of GH gathering technology in the tundra, a technology is discussed for recovering gas from GH layer and at the same time substituting CO2 hydrate for GH by blowing CO2 into the geologic layer. In FY 1998, formation/dissociation behaviors were first studied of methane/CO2 mixture hydrate. For the overall energy development of GH resource and promotion of R and D of the utilization technology, studies were made on physical properties of GH and development of the usage. (NEDO)

  13. Fiscal 1997 report on the R and D under consignment from NEDO on human sensory measurement application technology; 1997 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu itaku kenkyu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper outlined the result of the fiscal 1997 R and D on `human sensory measurement application technology (HSMAT)` which entered into the second stage. As to the R and D of technology for development of human sensory indices, examples for developing human sensory indices were set up for the following each technology to be developed, and measuring experiments were conducted: technology to assess the effect on physiological senses such as fatigue and awakening, technology to assess human adaptability to various environmental conditions, and technology to assess adaptability of products to humans from a viewpoint of affinity, etc. In relation to the R and D of technology for practical application of human sensory indices, a study was conducted of application examples for using each index to the design of daily products and residential/working environments, and at the same time a prototype database of human sensory data was trially made using part of the experimental data. Moreover, for clothes and working environment to feel better, design/assembly were conducted of a hand/leg movable and sit-on-chair manikin which enables rational estimation of thermal sense of humans. 82 refs., 391 figs., 88 tabs.

  14. FY 1998 result report on the leading R and D of MGC ultra-high efficiency turbine system technology; 1998 nendo MGC chokokoritsu turbine system gijutsu sendo kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    One of the main subjects for further conserving energy by enhancing efficiency of gas turbine system for power generation, etc. is the heightening of operation temperature. The development is urgently needed of heat-resistant ultra-high temperature members which make high-reliable operation under ultra-high temperature possible. Therefore, an introductory study was made aiming at using MGC materials which does not reduce strength even at high temperature and also has plastic deformability as large-size structure members of gas turbine system for power generation use. In FY 1998, the following were studied: (1) basic study to get material design guidelines for making efficiency of MGC materials higher; (2) construction of the basic data for elucidating the manifestation mechanism of high temperature characteristics of MGC materials; (3) setting of gas turbine specifications which are to be the basis of study work in and after FY 1999; (4) setting of parameters to be evaluated, evaluation criteria, etc., and definition of the evaluation criteria for possibility of establishing an MGC ultra-high efficiency gas turbine system. (NEDO)

  15. Fiscal 1997 report on the cooperative research on the preservation and sustainable utilization of biological diversification; Seibutsu tayosei hozen to jizokuteki riyo nado ni kansuru kenkyu kyoryoku (1997 nendo hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Cooperative researches were conducted between Japan and Thailand, Indonesia and Malaysia for the purpose of the technology development to make developing countries themselves preserve bioresources existing in tropical forests and use those sustainably. The research subjects for Thailand are a strategical study on eating of the primates, improvement of a microorganism culture collection system, preservation of biological diversification using an artificial ecosystem, bioresource utilization, etc. The subjects for Indonesia are a study of a microorganism culture collection system, study of plant preservation technology, study of microorganism utilization technology, study of plant utilization technology, promotion of the founding of the Indonesia tropical bioresource information center, etc. The subjects for Malaysia are biological diversification database and gene bank, assessment/monitoring of the ocean ecosystem, assessment and inventory of the ecosystem using hi-tech technology, search/separation of bioactive substances originated from microorganism/plant, etc. 26 refs., 24 figs., 81 tabs.

  16. Prospects and problems in greenhouse effect gas reducing technologies. Report from the global environment preserving technology discussion committee; Onshitsu koka gas teigen taisaku gijutsu no tenbo to kadai. Chikyu kankyo taisaku gijutsu kento iinkai hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    With respect to effects of technologies on reducing discharge amount of greenhouse gases (carbon dioxide, methane and nitrous oxide), assessments and analyses were performed on 420 techniques including energy saving technologies and new energy technologies. The energy conversion department requires further cost reduction by using such systems as LNG combined power generation using natural gas and high-efficiency coal burning thermal power generation. Requirements for paper and pulp industry include development and wider use of energy saving technologies over the entire manufacturing process, such as a direct causticizing technology and a high-performance recovery boiler. Problems in the cement industry are wider use of blast furnace cement and utilization of coal ash and tire wastes as raw fuels, and those in the iron and steel industry are energy conservation by use of coke furnace moisture adjustment and sintering cooler waste heat recovery. In the civil engineering department, introduction of heat and air insulating methods for buildings, and cogeneration operating on ceramics gas engines is expected. Use of oil substituting energy fueled cars is expected in the transportation department. 5 refs., 12 figs., 1 tab.

  17. Fiscal 1998 achievement report. Industrial technology research and development project. (Strategic human cDNA genome application technology development); 1998 nendo senryakuteki hito cDNA genome oyo gijutsu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    A human genome related project named above was started, and studies were conducted for base sequence determination and function analysis for approximately 10,000 kinds of full-length or long-chain human cDNA clones owned by research organizations in this country. The Institute of Medical Science of University of Tokyo and Helix Research Institute dealt with a full-length human cDNA library constructed by oligo-capping, and determined the base sequences of all specimens in the library. The Kazusa DNA Research Institute determined partial sequences for long-chain clones which are not shorter than 4-5kbp, and determined entire sequences for some bases. The obtained base sequence data were subjected to homology analysis, the base sequences were converted into amino acid sequences, and functions of proteins were predicted. In the analysis of gene functions, ATAC-PCR (adaptor tagged competitive-polymerase chain reaction) was applied to the clones covered by this project, and a database was prepared by use of the results of analyses of frequency-related information. For the preparation of a comprehensive gene expression profile, technologies for cDNA microarray construction were established. (NEDO)

  18. Fiscal 1996 international research cooperation project. Report on the R and D result of the environmental harmony type combustion technology; 1996 nendo kokusai kenkyu kyoryoku jigyo. Kankyo chowagata nensho gijutsu ni kansuru kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The research was conducted jointly with Europe of a catalyst which enables clean combustion and NOx removal in polluted gas in combustion flue gas, etc. Reformation of mordenite and {beta}-zeolite was done by ion exchange, ion implantation, and membrane formation. A catalyst was searched for to obtain reducing agents, C5-C8 components, by decomposing light oil. Saponite, clay compound, showed by copper and silver ion exchanges approximately 50% of activity under 20,000h{sup -1}, C3H6 reducing agent, and without steam. The effect of the temperature of sintering on NOx selective reductionality of silver-carrying alumina catalyst was studied, and in sintering at 800degC, activity increased. When using conductive oxides like ruthenium oxide for electrolyte, NO decomposition selectivity increased. As to the functional layer carried above the Pd electrolyte, iron oxide and magnesium oxide increased NO decomposition selectivity. PdO and rare earth oxides forming compounds controlled variation of activity by dissociation/reoxidation of PdO. As to PdO/Gd203, the initial methane combustion activity was favorable, but there was seen deterioration with age. 271 refs., 281 figs., 58 tabs.

  19. Report on research results of the development of high efficient boilers in fiscal 1996. Research development of high efficient industrial furnaces, etc; Koseino boiler no kaihatsu ni kansuru kenkyu seika hokokusho. Koseino kogyoro nado ni kansuru kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Out of the developments of high efficient boilers which have been continued since fiscal 1993, the paper reported the result of the development conducted in fiscal 1996. The oxygen combustion (the oxygen enrichment combustion including 100% oxygen combustion) decreases the amount of flue gas and reduces heat loss of the flue gas, and is also effective as NOx reduction measures. The experiment was conducted using testing furnace. The boiler efficiency rapidly increased with the increasing concentration of oxygen enrichment. In the pure oxygen combustion, the overall boiler efficiency of a 106% level (low heating value standard) is expected. Since the boiler wet flue gas is decreased, the NOx emission is reduced. The boiler can raise the combustion temperature with no fear of NOx and can be reduced in size. CO2 decreases in proportion to the energy saving effect. The development of a condensation flue gas heat exchanger is aimed at recovering heat down to the low temperature. Prediction of heat transfer in the steam condensation region becomes possible, and the size reduction can be expected. Dew point corrosion resistant materials were also selected. As to the high speed combustion control, a simple type using micro-processor was developed. Obtained were high speed, compactness, electric power saving, and high controllability. 14 refs., 306 figs., 88 tabs.

  20. Report on results 1998. Standardization of test measuring method of fine ceramics for communication equipment; 1998 nendo seika hokokusho. Tsushin kikiyo fine ceramics no shiken hyoka hoho no hyojunka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Technological development is in progress at present for the intelligent transport system for example that uses a microwave frequency range of 60GHz or 90GHz toward the practical use, with a demand increasing for measuring the electrical properties of fine ceramics (FC) to be used in the communication equipment of the system. The measuring method in the microwave frequency range of 30GHz or less is about to be standardized in IEC TC49/WG10; however, the method above 30GHz has not yet been examined for the standardization internationally. The subject research is intended to establish the method of measuring electrical properties such as the dielectric constant of FC for a high-frequency/ultra high-frequency wave range, dielectric loss and surface resistivity, to standardize the principle of their measuring methods, measuring tools, adjusting method of samples, procedures of measurement, etc., and to aim at the international standardization. This year, investigation and examination were carried out on various measuring methods including overseas examinations in the U.S., extracting the Fabry-Perot resonator method and a conductive cylindrical dielectric cavity resonator perturbation method for example, and evaluating the specifications of standard reference materials. In addition, a morphological technique was established for measuring sample surfaces affecting measurements, by means of an accurate measuring instrument for thin film surfaces. (NEDO)

  1. FY 1998 annual summary report on research and development of hybrid pulse plasma coating (HPPC) system (first year); 1998 nendo hybrid gata pulse plasma coating (HPPC) system no kenkyu kaihatsu seika hokokusho. Daiichinendo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The R and D program was implemented for a hybrid pulse plasma coating system, where organometallic gases as the feed gases were selected, and methods for feeding them and treating the exhaust gases to remove organic metals were studied, as the preliminary steps for the pulse introduction tests. The tests of combining an rf plasma with microwaves and pulse plasma generation have been started. The power source characteristics, e.g., pulse width, voltage and current, were analyzed, and high-voltage pulse voltage application tests were conducted, in order to grasp the power source characteristics related to the pulse voltage application. Generation of high-density plasma has been confirmed by the tests with microwaves absorbed by an rf plasma, and the plasma density measurement has been started using the single probe and double probe methods. It is also confirmed that a pulse voltage can be applied to a high-density plasma. A plasma source type ion injector (PSII) has been made on a trial basis, to collect the data for the injector. (NEDO).

  2. Research cooperation project on the development of easy injection molding control technology for engineering plastics; Engineering plastic no seikei joken kan`i settei gijutsu ni kansuru kenkyu kyoryoku jigyo seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    In order to enhance the industries which supply assembly parts to Japan`s assembly industries in Thailand, research cooperation project on the plastic parts production technology has started. For the research cooperation, the mold design is effectively conducted using simulation technique of CAE (computer aided engineering), and an international easy injection molding control system is made using the molding support software for injection molding machines. In FY 1996, actual situations of plastic parts and assembly industries in Thailand have been investigated through the cooperation with the counterpart of Thailand. Demand and supply of engineering plastics, receive and inspection of parts, and current circumstances of molding processing makers in Thailand have been grasped. Based on the results of this investigation, proposal of basic plan, time schedule, and delivery plan of molding machines and testing equipment have been discussed, to make the basic plan. 18 refs., 4 figs., 23 tabs.

  3. Fiscal 1998 R and D report on human feeling measurement application technology. Part 2. Main report (2); 1998 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu itaku kenkyu seika hokokusho. 2. Honronhen (2)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report reports case studies on human feeling measurement (physiological index (A), environmental adaptability index (B)) application technology, and product adaptability evaluation technology. In fiscal 1998, a real living simulation experiment was conducted in addition to an integration and verification experiment of indices. As for (A) such as stress, fatigue and stimulus, the composition for every integrated index, verification of its effectiveness under real environment, and the effect of environmental factors on it were studied to improve prediction accuracies, and compose index groups corresponding to various work environments. As for (B), adaptive feeling and fatigue feeling under visual, noisy and thermal environments, its effect on work results, and rest comfortability were studied, and an index formula for predicting subjective evaluation quantities from physical properties was prepared. In the simulation, an operability of monitoring works, the relation between a product index and (A), a lighting effect on night works, bathing and ununiform thermal environment were evaluated. The effect of (A) in real living, and an application guidance were also clarified. The result was adopted for a human feeling manual and database model. (NEDO)

  4. Report for fiscal 1998. Joint research of environment-friendly system for effectively utilizing water resources; 1998 nendo hokokusho. Kankyo taiogata mizushigen yuko riyo system ni kansuru kenkyu kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The research is conducted in cooperation with Industrial Technology Development Institute of the Philippines, and aims to solve water related problems such as unstable water supply and water quality pollution though developing a waste water treatment and recycling system which is easy to operate and maintain, low in cost, and usable in the Philippines. Fiscal 1998 is the second year of the project. Statistics are studied about the load that each industrial branch imposes on water for its pollution, and it is found that food manufacturers, paper pulp mills, and fiber dyeing plants are heavily responsible for water pollution. A method consisting of single-tower UASB anaerobic treatment and activated sludge treatment is applied as a water treatment process to Ram Food Products Corporation, and its optimization is studied. A removal rate 60% is achieved after a 12-hour treatment period at a COD (chemical oxygen demand) rate of 8g/liter/day. A method consisting of coagulating sedimentation and activated sludge treatment is applied to the waste water from a Solid Mill Corporation dyeing plant, when it is found that the water after ultimate treatment is almost colorless and that COD is 76mg/liter and BOD (biological oxygen demand) 13mg/liter, and these suggest that the waste water is recyclable. Since it is low in COD removing rate, the application of anaerobic treatment to high-concentration water after washing is not appropriate. (NEDO)

  5. FY 1999 report on the development of technology to recycle architectural waste materials, glass, etc. Development of technology to recycle architectural waste materials; 1999 nendo kenchiku haizai glass nado recycle gijutsu kaihatsu seika hokokusho. Kenchiku haizai recycle gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-09-01

    Waste wood materials in the materials discharged from architectural disassembly were regarded as a potential wood resource, and the R and D of the technology to recycle these were conducted. Studies were made on the technology to finely grind waste wood materials, technology to compress/form waste wood materials and ground wood powder, verification of strength characteristics/dimension stability of the formed wood materials, etc. As to the wood materials which were badly degraded under ultra violet rays, they were coloring-processed by the steam treatment, and a possibility of coating substitution was confirmed. In relation to the technology to produce compressed wood materials, the optimization of heat treatment conditions was experimentally conducted. About the technology to give dimensional stability, dimensional stability was improved as a result of the improvement of chemicals feeding and the development of chemically processed drugs. In the development of light formed products, the board was successfully formed which is light in weight using lignocelluloses/inorganic hydrates and has the bending strength higher than that of the plaster board. In the development of interior materials, the technology was developed in which ground wood powder and thermo-plastic resin are mixed for die molding, and the OA floor using this was commercialized. (NEDO)

  6. FY 1980 Report on research and development of plant related to Sunshine Project. Final report on commissioned researches; 1980 nendo sunshine keikaku ni kakawaru plant kenkyu kaihatsu itaku kenkyu kanryo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1981-03-31

    Reported herein are the FY 1980 results of research and development of the plant for hydrogen production by electrolysis of water at elevated temperature and pressure, as part of Sunshine Project. The 4 Nm{sup 3}/h hydrogen production test plant, constructed in the previous year, is equipped with a data acquisition system, safety and protective devices, and emergency power monitoring system, and operated for testing performance at high current density, vapor/liquid separation effects, and electrolytic solution concentration changes. Of the electrodes tested, the electrode of ultrafine nickel particles with expanded surfaces, developed by Government Industrial Research Institute, Osaka, has exhibited the highest efficiency of approximately 90%. The tests for plant development include the tests of a 900 mm class air-tight insulation tester, development of a double-polarity plate mold with irregular surfaces for the electrodes, development of self-propelling valves on a trial basis, improvement and development, on a trial basis, of electrodes and diaphragms, and acceleration tests using a galvanic corrosion tester. Researches on metallic constituent materials include corrosion tests by an autoclave, constant-load type tester and low strain rate type tester. (NEDO)

  7. Achievement report for fiscal 1998 on the research and development of genome informatics technology. Development of energy use rationalization technologies; 1998 nendo genome informatics gijutsu kenkyu kaihatsu seika hokokusho. Energy shiyo gorika gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    In the field of the analysis of gene expression frequency information, a novel glass coating method and a highly sensitive high-speed reading device are developed. Element technologies are studied for the development of a detection system capable of high-density high-speed reading of high-density DNA capillary array, with a long-chain DNA probe solidified therein. In the technology of transcription control information analysis, concerning the technology of transcription dynamics analysis using tagged transcription control factors, the construction of a model system protocol is studied, an automatic analysis system is developed, and an evaluation technology is also developed. Furthermore, a novel method is proposed, in which two specimens will be prepared, that is, a microbead coupled DNA specimen consisting of base sequences of all combinations of a certain chain length and a cDNA (complementary deoxyribonucleic acid) derived protein specimen, and DNA-protein complexes will be isolated for analysis bead by bead out of a liquid which is a mixture of the said two specimens. (NEDO)

  8. Report for fiscal 1994 on simple operation type CAD/CAM system development through international cooperation; 1994 nendo 'kan'i sosagata denshi sekkei seisan shien system no kaihatsu ni kansuru kenkyu kyoryoku' ni kansuru hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    The aim of this project is to accelerate the advancement of supporting industry (SI) for the sake mainly of manufacturing industries in Asian countries through researches carried out jointly with the Asian countries on electronic designing and manufacture supporting systems that suit actualities in the respective participating countries. In fiscal 1994, activities are conducted which primarily involve inquiries into the current status of other parties' organizations, fermentation of mutual understanding, and, in Japan, a review of plans of some cooperative projects. On-site investigation parties are dispatched to other countries on two occasions, who talk with the other parties about the drafting of memoranda of understanding, contents of the assistance to be extended, inquiries into the actualities of the visited parties, and the explanation of what technologies Japan has to offer. A production-related futuristic integrated information system promotion committee is established and, thereunder, working groups are organized on automobiles and their parts, electrical home appliances and their parts, fiber and apparel, participated in by learned men, and studies are conducted about the current status and trend of electronic designing and manufacture supporting systems and about steps for implementing the subject project. (NEDO)

  9. Fiscal 1997 report on the results of the research on the development of high-performance industrial furnaces. Volume 3; 1997 nendo seika hokokusho (koseino kogyoro no kaihatsu ni kansuru kenkyu seika hokokusto)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    A R and D was conducted for the purpose of developing remarkable energy conservation/CO2 reduction technologies. In fiscal 1997, the five working groups about the following were formed to have animated discussions: the basic research, heating furnace, heat treatment furnace, melting furnace, and tubular heating furnace. The research subjects are the pursuit/deepening of the base study on flame structures in high temperature air combustion, critical heat recovery of the system in high temperature air combustion, examination of the basic common technology on the ultimate optimization of the material heat transfer, construction of general-purpose experimental database, setting-up of design standards for general-purpose high-performance industrial furnaces, presentation of examples of the actual trial design based on the design standards and feasibility study of the practical application, preparatory support of the field test project on high-performance industrial furnaces for commercialization/diffusion/spread, etc. Further, how to arrange the developmental results was studied to make the results of the project useful for study of the prompt commercialization. 442 refs., 1444 figs., 311 tabs.

  10. Fiscal 1997 international cooperation project. Report on the results of the research on environmental harmony type combustion technology; 1997 nendo kokusai kenkyu kyoryoku jigyo. Kankyo chowagata nensho gijutsu ni kansuru kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Out of the R and D on the environmental harmony type combustion technology, the results of the project carried out in fiscal 1997 were summed up. In the site survey, etc., visits were paid to France, Spain, Greek, Germany, the U.K. and the U.S. to have discussions and examine the trend of research on the NOx removal catalyst and catalyst combustion. In the actual R and D, the R and D were conducted on zeolite base NOx removal catalyst, oxide composite base NOx removal catalyst, alumina base NOx removal catalyst, direct decomposition type NOx removal catalyst, catalyst combustion, etc. In the R and D of the catalyst combustion, durability under high gas flow flux was examined of PdO-Pt/Ba-Al203 catalyst developed for low temperature use, which indicated that durability and low temperature activity were heightened. As high temperature use catalyst, high temperature durability was examined of the developed Pd0-La/Gd-ZrO2 catalyst, which showed that the durability was favorable. 322 refs., 261 figs., 55 tabs.

  11. Fiscal 1997 report on the results of the international standardization R and D. Data format for rapid prototyping systems; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Sekiso zokei system yo data format

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Concerning the rapid prototyping (RP) system use new RP format and the related software, the paper promoted the international standardization in consideration of relationships with an international standard, STEP. RP, which is a technology to rapidly prototype a solid body based on the three-dimensional CAD data, is used in various fields of product manufacture, medical field, etc., and is expected to further expand its field of application. In this R and D, an international version of the RP software system developed for domestic use was developed, and at the same time a software was trially manufactured so that the data on STEP/AP203/CC5 and CC6 can be delivered to the system. Moreover, a plan on new AIC51X as the STEP/AIC suitable for PR was studied. Relating to these results, the paper conducted the publicity work to the persons concerned in RP in the U.S. and Europe, and also explained those at ISO/TC184/SC4 (STEP Conference). The PR use interface enabling highly rapid and accurate data processing reached to a stage of the international commercialization, and at the same time the study items were materialized for proposal of the new STEP standards suitable for RP. 18 refs., 80 figs., 12 tabs.

  12. Achievement report for fiscal 1998 on the technological development of super metals. Technology to create iron-based mesoscopic tissue controlling materials; 1998 nendo super metal no gijutsu kaihatsu seika hokokusho. Tetsukei meso scopic soshiki seigyo zairyo sosei gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Research and development has been carried out on super metals with an objective to draw out properties possessed by iron and steel materials to their maximum extent and further enhance their recycling performance to make them friendly with global environment. The final goal of this project is to 'establish a technology to create micro tissue steel having crystalline particle diameter of about 1 {mu}mm or less and size having thickness of 1 mm or more by making the steel tissues uniform and multiple in phase'. The studies in the current fiscal year were moved forward mainly on obtaining ultra fine crystalline particles of 1 {mu}mm or less, identifying the ideal large distortion processing conditions, and structuring the guidance principles for ultra-fine micronization of the crystalline particles by using large distortion processing. Discussions were also launched on further micronization of crystalline particles by optimizing chemical composition and on expansion of the process windows assuming practical application thereof in industrial scale. Furthermore, material property evaluation was also begun on ultra-fine crystalline particle materials of smaller than 1{mu}mm. As the mesoscopic structure analyzing technology for the ultra-fine crystalline particle materials, an in-lens resolution SEM was introduced, and the basic method was established. (NEDO)

  13. Report on the project for working out the new energy vision of the Chinen Village area in FY 2001; 2001 nendo Chinen son chiiki shin energy vision sakutei tou jigyo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-02-01

    For the purpose of promoting the introduction of new energy and enhancing the awareness of it in Chinen Village, Okinawa Prefecture, an investigational study was conducted of the trend of energy consumption of the village, existence amount of new energy, case study for new energy introduction, etc., and a vision was worked out. The energy consumption amount of Chinen Village in FY 1999 was estimated at 591,935 x 10{sup 3} MJ/y. By sector, the consumption amount in the transportation sector was the highest, approximately 40%, followed in order by the household sector, business sector and industrial sector. The rate of energy source was 49.2% of petroleum, 42.3% of electric power and 8.5% of gas. As the case study for new energy introduction, the following were studied: introduction of photovoltaic power generation to the village office/Azama Sun Beach/hydroponics/JA branch office/prawn farm, introduction of photovoltaic power generation/wind power generation to the village gymnasium/village drainage pump/refrigerating facilities of the fisheries cooperative association, etc. Further, as the new project, the following were studied: introduction of photovoltaic power generation/wind power generation to the agricultural irrigation project/comprehensive sports park, introduction of photovoltaic power generation to the new building of Chinen Elementary School/maker of processed medicinal herbs. (NEDO)

  14. Overview of FY1997 human media technology R and D; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu seido Shin energy Sangyo Gijutsu sogo Kaihatsu Kiko itaku jigyo. Human media no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper reports a summary of results in fiscal 1997 of research and development of human media technology. Fiscal 1997 launched design and trial fabrication of the following items: interface to improve efficiency and safety of plant operators, accommodation of multimedia contents to aid Kansei design, city development design aiding technologies using contents retrieval and presentation technologies and virtual reality, and empirical evaluation technologies for safety, comfort and convenience. Specific study assignments were extracted on a virtual media technology, a Kansei media technology and a knowledge media technology being three elementary technologies for human media to make clear the research and development approaches to be taken in the coming fiscal years. In addition, a human media technology committee, a research and development working group, and an investigation working group were established. Also launched were investigations on research trends in the human media technology, and investigative researches on contacts of information needs in industries with human media. 59 refs., 114 figs., 24 tabs.

  15. Basic research on energy conservation in developing countries. Report of the International Conference on Adaptation and Mitigation Technologies for Climate Change; Hatten tojokoku energy shohi koritsuka kiso chosanado jigyo. Kiko hendo ni kansuru tekio kanwa gijutsu kokusai kaigi hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The International Conference on Adaptation and Mitigation Technologies for Climate Change was held based on the 1st Conference of the Parties in 1995 of the United Nations Framework Convention on Climate Change, and the 2nd evaluation report of the Intergovernmental Panel on Climate Change (IPCC). This report carries the outline of this conference and minutes. Japanese government had studied the framework of activities implemented jointly (AIJ) for emission control of greenhouse gases by voluntary workers jointly with developing countries. The government decided the basis of the AIJ Japan program in 1995, and approved the evaluation guidelines of this program including confirmed and considered matters which are necessary for government offices related to this program to evaluate and approve each project. IPCC approved the 2nd evaluation report in its general meeting in 1995. This conference was thus held to discuss strategic technology and international cooperation with participation of writers of the 2nd IPCC report, policy planners of Asian countries, Japanese industries, governmental offices and NGO.

  16. Fiscal 1996 survey report. `Ultra high electronic technology development promotion project` under consignment from NEDO; 1996 nendo kenkyu seika hokokusho. Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku jigyo `chosentan denshi gijutsu kaihatsu sokushin jigyo`

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-05-01

    For the purpose of establishing ultra high technology of a next next generation level which is a basic technology in the electronic information field, a key to the realization of the high grade information society and a common technology base giving marked influences to the wide range industrial field, the R and D was started of ultra fine processing process technology, technologies on limit measuring/analysis/control and new functional electronic materials. Themes of the R and D are electronic beam direct picture drawing system technology, ultra short wavelength electromagnetic radiation patterning/system technology, ultra fine sensitizing technology to draw pictures on metal and crystal surfaces using ultra short wavelength laser beams, shading system technology of shading mask to be used to the process of drawing ultra high accuracy and complicated figures, ultra high tech plasma reactive measuring/analysis/control technologies which become the base of ultra thin films and ultra fine etching using plasma, ultra high tech cleaning base technology, ultra high sensitivity medium technology, new functional element/film formation technology, etc. 137 refs., 358 figs., 38 tabs.

  17. FY 1998 annual report on the exploration and production of functional peptide from unutilized protein resources; 1998 nendo miriyo tanpakushitsugen kara no kinosei pepuchido no tansaku to seisan ni kansuru kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This project is aimed at promotion of effective utilization of unutilized resources by transforming histidine-containing peptide (anserine), enzymatically hydrolyzed muscle protein present in lean salmon swimming off the Sanriku District in the spawning season, into functional peptide. A reactor system, comprising an enzyme-immobilized column and rotary bioreactor, is investigated to efficiently produce peptide by enzymatically hydrolyzing the water-insoluble muscle protein. Anserine is isolated by ethanol extraction, ion-exchanging and partition chromatography. The TPTZ and ABTS methods are developed for speeding up measurement of the antioxidant activity. The salmon muscle protein is hydrolyzed by 3 types of enzymes, to measure the free radical erasing activity by the ABTS method. The enzymatically hydrolyzed protein is fractionated by gel permeation chromatography. The fractions having a molecular weight of 10,000 or less show strong antioxidant activity. The hydrolyzed protein shows improved activity by the iron rhodanide method when it has histidine at the center of tripeptide, and strong radical erasing function when it has thyrosine or tryptophan at the carboxyl terminal. (NEDO)

  18. Fiscal 1998 research report. R and D on super metal (Al system mesoscopic texture-controlled material); 1998 nendo seika hokokusho. Super metal no gijutsu kaihatsu (aluminium kei mesoscopic soshiki seigyo zairyo no gijutsu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For development of Al materials with superior industrial characteristics (strength, corrosion resistance), this research has promoted development of large-size Al system materials with mesoscopic crystalline texture by high- strain accumulation control technology, and recovery and recrystallization control technology. In this fiscal year, (1) basic study on high-strain accumulation control technology, (2) study on a formation mechanism of ultra- fine crystal grains, and (3) development of a machining process were made. In (1), basic study on low-temperature rolling and study on rolling by rollers having different peripheral speeds were made. In (2), study on refining of recrystallized grains of 5000-base and 7000-base alloys was made. In (3), a low-temperature rolling equipment, and a ultra-rapid heating device were introduced. For the whole R and D project on super metal, the main research facilities such as a low-temperature rolling body for high- strain accumulation and a high-strain accumulative structure formation equipment (melt rolling equipment) for uniform nucleus formation in recrystallization were introduced to gain a firm foothold for the future application research. (NEDO)

  19. Research cooperation project in fiscal 1998. General report on research cooperation related to mine waste water treatment technology by utilizing biotechnology; 1998 nendo kenkyu kyoryoku jigyo. Bio riyo ni yoru kohaisui shori gijutsu ni kansuru kenkyu kyoryoku sokatsu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This paper describes cooperative development of bio-treatment technology for mine waste water generated by operating mines in China. Certain types of bacteria have capability to oxidize ferrous iron in the waste water into ferric iron ions. The bacteria cause ferric iron oxides in low pH regions to get deposited, and can remove them from sedimentation by using cheap calcium carbonate as a neutralizer. Volumetric reduction in waste sediments may also be achieved during removing heavy metals in a pretreatment process. Great advance may be expected in taking actions to prevent water quality contamination. This paper summarizes activities taken in fiscal 1998. Eight site surveys in total were carried out using 47 persons in total. Major activities included operation study guidance of a pilot plant, and surveys for measures on heavy metal generation sources in Wushan Mine. In addition, site surveys were performed at Dexing Mine and Yinshan Zinc Mine. Subsequently from fiscal 1997, a bench scale testing equipment used in Japan and consumables were transported to China. The operation study data on the pilot plant were put into order and analyzed. Concept design was also made on a waste water treatment facility for Wushan Mine. (NEDO)

  20. Fiscal 1997 report on the results of the research on the development of high-performance industrial furnaces. Volume 2; 1997 nendo seika hokokusho (koseino kogyoro no kaihatsu ni kansuru kenkyu seika hokokusto)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    A R and D was conducted for the purpose of developing remarkable energy conservation/CO2 reduction technologies. In fiscal 1997, the five working groups about the following were formed to have animated discussions: the basic research, heating furnace, heat treatment furnace, melting furnace, and tubular heating furnace. The research subjects are the pursuit/deepening of the base study on flame structures in high temperature air combustion, critical heat recovery of the system in high temperature air combustion, examination of the basic common technology on the ultimate optimization of the material heat transfer, construction of general-purpose experimental database, setting-up of design standards for general-purpose high-performance industrial furnaces, presentation of examples of the actual trial design based on the design standards and feasibility study of the practical application, preparatory support of the field test project on high-performance industrial furnaces for commercialization/diffusion/spread, etc. Further, how to arrange the developmental results was studied to make the results of the project useful for study of the prompt commercialization. 442 refs., 1444 figs., 311 tabs

  1. Fiscal 1997 report on the results of the international standardization R and D. International standards for computers/manikins; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Computer manikin ni kansuru kokusai hyojun kikaku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Through the development of computer manikins (CM) which assess human adaptability to products and environments, a draft for international standardization was worked out to propose to ISO. A draft for the international standardization was presented to ISO through a development of `a structure model` changing based on human attributes, a study of `a motion model` enabling changes in posture and movement, a study of `an evaluation model` evaluating attainment ranges and ecodynamic loads, and a development of `computer functions` realizing the above-mentioned functions. The development of CM having the following characteristics: a function to reproduce `the structure model` based on the ISO7250 human body dimensional measuring values which were regulated in items for the human body dimensional measuring, a function to change posture/movement based on the joint movable range data, a function to evaluate geometrical human adaptability such as attainment ranges. As a plug-in to Autodesk Mechanical Desktop 2.0, the above-mentioned functions were realized, and the modular structure platform was constructed which enables the wide-range cross-industry option and functional expansion by the advance of CM. 7 refs., 41 figs., 18 tabs.

  2. Fiscal 1998 R and D report on human feeling measurement application technology. Pt. 1. Outline; 1998 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu itaku kenkyu seika hokokusho. 1. Gaiyohen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report outlines the fiscal 1998 R and D result on human feeling measurement application technology. For development of assessment technology of the impact of work fatigue on human feeling (human feeling index), and assessment technology of the adaptability and affinity between human being and environment or product (environment and product adaptability index), data storage and evaluation by measuring experiment of human feeling, and modification of every index toward the final index based on the above data were carried out. Further case studies were carried out to reflect the above both indices to design of living products or residence and office environments, and new data were also collected. The database model for using previously collected human feeling data effectively, and the sweating manikin for estimating human thermal feeling reasonably were developed. In addition, the human feeling measurement manual was prepared to diffuse these technologies. The R and D system is also described. (NEDO)

  3. Report on the invitation program for developing countries concerning technology promotion project of global environmental industry in FY 1997; 1997 nendo chikyu kankyo sangyo gijutsu suishin jigyo ni kakawaru chikyu kankyo kanren gijutsu kaigai kenkyusha shohei jigyo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In an effort to help preserve the global environment, International Center for Environmental Technology Transfer (ICETT) contributes to the solution of global environmental problems by promoting research exchanges with developing countries. As a part of this effort, ICETT hosted an environmental development researcher who visited Japan from the Institute of Environmental Research of Chulalongkorn University in Bangkok, Thailand. The invitation was extended at the request of NEDO. During the period of this investigation between September 16 and December 14, 1997, a photocatalyst was prepared and its performance was evaluated under the theme ``Application of photocatalysis to purification of atmospheric environment.`` At the same time, roadside test spots were inspected to study the practical application of optical photocatalysis. The visiting researcher also visited the National Institute for Resources and Environment to discuss with the staff of institute. This helped to deepen understandings of the state of air pollution problems confronting Japan, Europe, and North America, as well as issues related to the technologies that have been developed to solve these problems. The visiting researcher toured the RITE and examined Japan`s progress in the development of environmental control technology through joint research involving government, industry, and academia. At ICETT, the visiting researcher received training in Japan`s approaches to environmental problems in developing countries

  4. 益气活血中药对胸部放疗患者血浆TGF-β1的影响%Effect of Chinese Herbs of Supplementing Qi and Activating Blood Circulation on TGF-β1 in Patients' Plasma with Thoracic Radiotherapy

    Institute of Scientific and Technical Information of China (English)

    邢彬; 王炳胜; 张海; 葛艳丽; 雒书朋; 纪文达

    2011-01-01

    Objective: To evaluate the effect of Chinese herbs of supplementing qi and activating bood circula-tion(CHOSA) on inhibition of proinflammatory cytokines transforming growth factor-beta 1 (TGF-β1) obtained from patients with radiation-induced lung injury and explain their anti-injury mechanism at molecular biology level. Methods: 104 lung cancer patients were randomly divided into 3 groups; Chinese herbal drugs + radiotherapy group (group A,32 patients), ambroxol + radiotherapy group (group B,38 patients), radiotherapy alone group (group C,34 patients). The levels of TGF-β1 of the patients' blood plasma were detected with ELISA method at 4 time-points (1 day before radiation, 4 and 8 weeks after radiation), and all samples were handled and then be stoered. Results: The comparison of the level of TGF-B1 in plasma among 3 groups had no significant difference before radiotherapy. The number increased progressively within the first 4 weeks after radiotherapy, and steped up at 8weeks;The level of TGF-β1 in plasma of group A was lower than group B or group C at the time-point 4 and 8 weeks after radiotherapy, and the expression of group B was lower than group C, higher than group A. Conclusions:CHOSA could reduce the level of TGF-β1 in patients' plasma with radiation therapy. It is shown that CHOSA could prevent and treat radiation-induced pulmonary injury related with its effect to decline the level of TGF-BI in patient's plasma.%目的 观察益气活血中药对放射性肺损伤患者血浆转化生长因子(TGF)-β1的影响,从细胞因子角度探讨其防治放射性肺损伤的机制.方法 104例行胸部肿瘤放疗的患者随机分为中药加照射组(A组)、氨溴索加照射组(B组)、单纯照射组(C组).分别于放疗前1日、放疗结束后4周、8周抽取各组患者清晨空腹静脉血并处理、留存标本,对各标本中的TGF-β1浓度进行定量检测.结果 A、B、C三组血浆TGF-β1水平,于放疗后第4周至放疗后8周均

  5. Basic survey project for joint implementation in fiscal 1998. Study of BFG mono-firing gas turbine combined cycle power plant application for the steel mill of China; 1998 nendo kyodo jisshi nado suishin kiso chosa. Chugoku seitetsu kaishamuke koro gas sensho combined cycle hatsuden setsubi

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Discussions were given on application to the steel mills in China of a 1100-degree C class high-efficiency combined cycle power plant (CCPP) exclusively firing blast furnace gas developed jointly by Kawasaki Heavy Industries Ltd. of Japan and ABB Corporation of Switzerland. The CCPP can utilize the energy possessed by a fuel without waste from high temperature zones to low temperature zones, being capable of attaining high efficiency that cannot be achieved with the single cycle. The CCPP has the efficiency exceeding that of the BTGP by about 10% or more in absolute value. The investigations and discussions were given on Shougang General Corporation, Anshan Steel Corporation and Wuhan Steel Corporation. As a result, in the plan for the power plant of Shougang General Corporation on which both parties have agreed, the project implementation can be expected to result in electric power generation of 110 MW in annual average, factory air supply of about 100 tons per hour in annual average, and annual reduction of carbon dioxide of 841 kilo tons. Wuhan Steel and Anshan Steel will require implementation of further detailed investigation, but the possibility of realization is considered high (NEDO)

  6. 3D electrical method and step continuous wave radar method for Nojima site. Results of measurement of resistivity at trench site; Nojima danso ni okeru sanjigenhi teikoho to step shiki renzokuha chika radar ho tansa. Trench chosa chiten deno hiteiko sokutei kekka

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, K.; Oda, Y.; Tank, K. [Central Research Institute of Electric Power Industry, Tokyo (Japan); Hayashi, H. [Kawasaki Geological Engineering Co. Ltd., Tokyo (Japan); Jomori, A. [Japan Crust Research, Tokyo (Japan)

    1996-05-01

    Several surveys were carried out near the Nojima fault, including three-dimensional resistivity measurement and underground radar survey at the Ogura area, underground radar survey at the Hirabayashi area, and resistivity measurement in the vicinity of the trench at the Nashinomoto area, in order to investigate in detail the underground structures at a depth up to several tens meters from the ground surface. Resistivity was measured by an automatic analyzer capable of simultaneously measuring potential levels at 14 channels which can cover 112 measuring points at the largest. At the Ogura area, the boundary planes of the resistivity structures are continuously detected in the direction of the fault moving during the earthquake period. The underground radar measurement results suggest accumulated displacement of strata at a depth of around 25m in the Osaka Strata and flexible structures. At the Hirabayashi area, the underground radar analysis detects discrete sections in the reflection planes at the fault position, but no reflection planes of high continuity. At the Nashinomoto area, the clay stratum detected in the fault by excavating the trenches are found to be low in resistivity by the resistivity measurement. 4 refs., 11 figs., 2 tabs.

  7. Basic survey project of advanced efficiency of energy consumption in developing countries. Engineer invitation project from developing countries such as Vietnam, Philippines, China and Thailand; Hatten tojokoku energy shohi koritsuka kiso chosa nado jigyo. Hatten tojokoku gijutsusha shohei jigyo (Betonamu, Philippine, Chugoku, Tai)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For contributing to the promotion of energy saving and environmental conservation, eighteen officers and engineers were invited to Japan during the period between January 14th and 23rd in 1997, from Vietnam, Philippines, China and Thailand. This report summarizes the invitation project for training conducted under a theme `Energy saving and environmental conservation.` Lectures were given concerning activities of global environmental conservation by NEDO, history and measures of overcoming the Yokkaichi pollution, outline of new energy, outline of energy saving, outline of basic environment law, outline of final industrial waste treatment facilities, and global environmental issues. Site training was conducted at Hekinan Thermal Power Station of Chubu Electric Power Co., Inc., Fujiwara Works of Onoda-Chichibu Cement Co., Ltd., and Yokkaichi Works of Kyowa Petroleum and Chemistry Co., Ltd. Questions and answers were exchanged. The new energy and energy saving were impressive, and were new concept for the trainees. This project was considered to be continued. The inspection of works was also well received, which was considered to be continued

  8. Evaluation of sand-drain method in submarine ground. In-site tests in excavated vertical shaft and study of drain consolidation mechanism; Kaitei jiban ni okeru sand drain jiban kairyo koka no hyoka. Gen`ichi kussaku chosa to kairyo mechanism no kensho

    Energy Technology Data Exchange (ETDEWEB)

    Takahashi, S.; Toriihara, M.; Hirama, K. [Obayashi Corp., Tokyo (Japan)

    1999-07-10

    Although many soil stability works using sand-drain methods have been carried out, in-site tests after soil stabilization were rarely done. We conducted in-site tests in a excavated vertical shaft to estimate the effect of sand-drain consolidation at Osaka Maishima Island that was improved about 20 years ago. The tests showed that near the sand-drain water content was lower, strength and consolidation yield stress were bigger than far away from the sand-drain. To estimate these characteristics, we conducted model tests and FEM simulations, and clarified the drain consolidation mechanism. (author)

  9. Fiscal 1997 survey of overseas coal import base arrangement and promotion. Effects of the expansion of coal trade by IPP on the supply/demand of general coal in Asia; 1997 nendo kaigaitan yunyu kiban seibi sokushin chosa. IPP ni yoru sekitan boeki no kakudai ga Asia no ippantan jukyu ni oyobosu eikyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In consideration of the coal situation in the Asia/Pacific region, a study was made of effects of the expansion of coal trade by IPP on supply/demand of general coal in Asia. When aggregating increases in demand of general coal for electric power use in ten Asian counties, they will be an increase of 130.75 million tons in 2005 over 1997. Fifty nine percent of it is equivalent to the increase by IPP and exceeds the demand expanded by electric utilities operators. Further, a possibility is predicted of contracts and coal quality being different from until now. However, there will be a lot of cases in which plans of constructing power plants in Asia are not so developed as expected except Japan, Korea and Taiwan, and also the effect of the currency crisis starting in Thailand largely affects. In terms of the coal supply, countries which export general coal are only China and Indonesia. Indonesian coal is expanding its production and export rapidly and remarkably. The environmental control in Asia has been tightening, and the fuel selected by IPP is mainly coal rather than natural gas. 40 refs., 94 figs., 179 tabs.

  10. Energy supply/demand recorded in fiscal 1996 and a short-term prospect thereof. Report by a committee for investigating the trend of energy supply/demand; 1996 nendo energy jukyu jisseki to tanki tenbo. Energy jukyu doko chosa iinkai hokoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-10-01

    The Institute of Energy Economics, Japan, working on a subject of `analysis and prediction of short-term trend of energy demand/supply,` established a committee consisting of members in and out of the institute, and is analyzing short-term demand for energy. This report covers the results of fiscal 1996 and a short-term prospect, both compiled in August, 1997. Described are the state of demand/supply, production environments, and a prospect for fiscal 1997, involving each of the fields of industry. The report as summarized states that the primary energy delivered in Japan in 1996 was 529,401times10{sup 10}kcal (2.4% increase over the previous year) in total and that the ultimate energy consumption in the same period was 362,871times10{sup 10}kcal (2.2% increase over the previous year) in total, these statistics showing that the sharp growth that had continued for several years came to a rest. As for increase in consumption over the previous year, oil in general increased 1.6% and, specifically speaking, gasoline 3.7%, light oil 2.1%, and heating oil 4.5%. The increase is attributed to the winter much colder than in usual years and to the increasing number of vehicles. 44 figs., 77 tabs.

  11. Project of the basic survey of cooperation for the heightening of energy efficiency in developing countries. Project for inviting engineers from developing countries to Japan (Malaysia); Hatten tojokoku energy shohi koritsuka kyoryoku kiso chosa nado jigyo. Hatten tojokoku gijutsusha shohei jigyo (Malaysia)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    For the purpose of plannably and effectively spreading the results of demonstrative researches on energy conservation and environmental technology in developing countries which were jointly made with Japan and Japan`s advanced energy conservation and environment technology, etc., the project invited engineers of developing countries to Japan, gave the intensive research instruction, made the required information exchange, and attempted improving R and D ability of the engineers and smoothening transfer/spread of the technology concerned. Malaysia has been advancing strongly the economic growth along `the 6th Malaysia Plan,` and aims, as a national target, at completing industrialization by 2020 and reaching the level of developed countries. However, the environment problem in Malaysia is worsening. In this invitation project, two-week training was given to 15 trainees, paying attention to the following three items: (1) introduction of technologies of energy conservation and environment in Japan, (2) actual field training at research institutes and corporations which have high-technology on energy conservation and environment, and (3) information exchanges with executive officials, scientists, and researchers in Japan. 6 figs.

  12. Achievement report on the incoming projects related to ITS. Research and survey involving 'Research and development of universal design vehicle based on ITS technology'; ITS renkei kokei project an. 'ITS gijutsu wo tenkaishita universal design vehicle no kenkyu kaihatsu' ni kakawaru kenkyu chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-02-01

    For the promotion of 'Report on Strategy of Automobile Industrial Technologies - Strategy 2 - Promotion of Development of Vehicle Environment Recognition Technology and Driver's State Detection Technology,' investigations and studies including overseas surveys are conducted over six selected subjects which are (1) ITS (Intelligent Transportation System) and VCSS (Voice Communications Switching System), (2) old people, handicapped people, and universal design, (3) intelligent interface, (4) techniques of assessing bionic data and load of driving, (5) driving simulator and virtual reality, and (6) data communication, mobile data communication in particular. It is then found that, on the assumption that there exists a mobile communications environment such as ITS or Internet aboard the automobile, it is important to develop a universal design automobile which adapts itself to the driver thereby respecting driver's viewpoint and that such is to be accomplished by grasping driver's characteristics especially under extraordinary conditions in the way of Kansei engineering and by redesigning the driver's operating system making use of the active interface technology. A conclusion is reached that development should continue in compliance with the separately specified 6 items which are indispensable for the research and development of an ITS based man-adaptive automobile. (NEDO)

  13. Fiscal 1997 report on the results of the international standardization R and D. Measurement of ultra-micro chemical substances and measuring methods of hormone effects; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Chobiryo kagaku busshitsu no keisoku horumon eikyo sayo sokuteiho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Concerning the measurement system of ultra-micro hazardous chemical substances in the global environment, the paper examined the present situation of chemical substances such as dioxins, made an experimental study on the method to analyze dioxins in exhaust gas from an aspect of international consistency, and worked out a JIS draft. As to the standard measuring method of hormone effects of chemical substances, the paper developed the competitive bonding experiment system to measure bonding ability of chemical substances to homo sapiens estrogen receptor (ER). By measuring ER bonding ability of 78 kinds of chemical substances, the measuring method was developed. In the development of the assay system for detection of hormone-like compounds, the assay system with transfer activity via estrogen receptor as an index was established using cultured cells and yeast. Further, the development was made of a measuring method of receptor bonding activity of hormone-like substances. 33 refs., 151 figs., 66 tabs.

  14. Fiscal 1996 report on the results of the R and D under a consignment from NEDO of environmental technology such as recycling (for public). 1; 1996 nendo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Recycle nado kankyo gijutsu kenkyu kaihatsu seika hokokusho (kokaiyo). 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This R and D is aimed at promoting reduction in environmental loads by waste, etc. and reutilization of waste, etc., and at developing environmental technology such as recycling contributing to reducing road traffic noise. Studies were made on operation conditions of material separation in the bottle state and flake state, color separation, washing process, etc. Moreover, tests were conducted on comparisons of performance of shredders with different functions. Running tests of 100,000 times were conducted to confirm effectiveness of durability of the paved road with used papers. Measurement of hardness of the resin using the sol-gel method and coating experiment using organic dye were carried out to study the membrane effect speed and flaw resistance of coating of coloring bottles. Gasification of shredder dust and separation of nonferrous metal and glass were conducted to get the basic data. As to FRP bath tubs, the ratio of glass fiber and plastics was studied and western tiles were trially manufactured. Further studies were made of removal conditions of noncombustibles, chlorine and sulfur content, and reaction conditions of alkali additives including kind, quantity and addition method. 166 figs., 132 tabs.

  15. Fiscal 1997 report on the results of the introductory R and D of the New Sunshine Project under a consignment from NEDO. Introductory R and D of the supercritical fluid use technology; 1997 nendo `New Sunshine keikaku` sendo kenkyu kaihatsu Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Chorinkai ryutai riyo gijutsu sendo kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The R and D of chemical reaction using supercritical fluids started in fiscal 1997. In the R and D of solvent reaction, as the research on polymer decomposition with supercritical water, studies were conducted of the mechanism of conversion reaction to chemical materials, cleavage mechanism of stable chemical bonds, and synthetic reaction in the supercritical state reaction field. In the research on oxidation reaction, as the study of complete oxidation in supercritical water for high efficiency energy recovery, studies of complete oxidation of liquid fuels, and complete oxidation of solid fuels. In the research on hydrogenation, studies of lightening of heavy oil in supercritical water, etc. In the R and D of the basic technology, studies of corrosion mechanism of metals in supercritical water, construction of the basic framework for technical database of supercritical fluids, etc. In the survey of technical trends and new research themes, the introductory R and D of element technology, etc. were conducted, and the results were described of the survey of technical trends and new research themes and the trend survey of overseas technology. 314 refs., 87 figs., 81 tabs.

  16. Fiscal 1997 survey report. Subtask 4 (hydrogen utilization worldwide clean energy system technology) (WE-NET) (development of hydrogen production technology); 1997 nendo seika hokokusho. Suiso riyo kokusai clean energy system gijutsu (WE-NET) subtask 4 suiso seizo gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    As a WE-NET subtask, a study has been conducted of the solid polyelectrolyte water electrolysis method by which higher efficiency and lower cost hydrogen production is expected than in the conventional hydrogen production method. Production methods of electrode, electrolyte, etc. were studied. In the electroless plating method, the manufacturing process of membrane-electrode assemblies was realized in a large area of 2500 cm{sup 2} by the porous-surfaced method by studying manufacturing conditions for slurry membrane/membrane assembly/electroless plating processes. In the hot-press method, the refining degree and dispersibility of iridium dioxide powder were studied to improve characteristics of anode catalyst. A method was developed to form polyelectrolyte coatings homogeneously on the surface of electrode layer catalytic powder, and a large area of 2500 cm{sup 2} was realized. Beside the performance test using large single cells, FS was conducted to discuss optimum operating conditions and optimum structures of plants. Both methods indicated the performance exceeding the energy conversion efficiency of 90%, a WE-NET target, at current density of 1A/cm{sup 2} and electrolysis temperature of 80degC. A key was found to a bench-scale development (electrode area of 2500 cm{sup 2}, about 5 layers) to be planned in fiscal 1998. 136 figs., 50 tabs.

  17. Project in fiscal 2000 of developing international standards for supporting new industries. Standardization of method for evaluating mechanical stress of composite structures for aerospace use; 2000 nendo shinki sangyo shiengata kokusai hyojun kaihatsu jigyo seika hokokusho. Koku uchuyo sentan fukugozai no kyodo hyoka hoho no hyojunka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    R and D has been performed on methods to repair composite structures used in aerospace application, and on stress evaluation on repaired portions, targeting at establishment of international standardization. This paper summarizes the achievements in fiscal 2000. The current fiscal year has executed surveys on repair methods, selection of the repair methods, evaluation on the repairing processes, and compression strength evaluation on test samples given repairs. The method for repairing the sandwich-structure composite members was selected as a result surveys and discussions on published literatures. For the evaluation test on the repairing processes, specific repairing processes were established with reference to the result of surveys on the repair methods, which were applied to test samples having been given damages. In addition, discussions were given also on non-destructive inspection methods for sandwich panels. Regarding the strength test for repaired portions, a compression strength test was performed on test samples repaired by using adhesive after having been given damages, wherein data related to compression strength were obtained. Furthermore, a system was developed to analyze the scarf-like adhesive-repaired potions by using the two-dimensional finite element method model. (NEDO)

  18. Achievement report for fiscal 1997 on the development of technologies for utilizing biological resources such as complex biosystems. Development of complex biosystem analyzing technology; 1997 nendo fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu seika hokokusho. Fukugo seibutsukei kaiseki gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The aim is to utilize the sophisticated functions of complex biosystems. In the research and development of technologies for effectively utilizing unexploited resources and substances such as seeweeds and algae, seaweeds are added to seawater to turn into a microbial suspension after the passage of two weeks, the suspension is next scattered on a carageenan culture medium, and then carageenan decomposing microbes are obtained. In the research and development of technologies for utilizing microbe/fauna-flora complex systems, technologies for exploring and analyzing microbes are studied. For this purpose, 48 kinds of sponges and 300 kinds of bacteria symbiotic with the sponges are sampled in Malaysia. Out of them, 15 exhibit enzyme inhibition and Artemia salina lethality activities. In the development of technologies for analyzing the functions of microbes engaged in the production of useful resources and substances for animals and plants, 150 kinds of micro-algae are subjected to screening using protease and chitinase inhibiting activities as the indexes, and it is found that an extract of Isochrysis galbana displays an intense inhibitory activity. The alga is cultured in quantities, the active component is isolated from 20g of dried alga, and its constitution is determined. (NEDO)

  19. Fiscal 1996 report on the results of the R and D under a consignment from NEDO of the technology to fix and effectively use carbon dioxide using bacteria and microalgae (for public); 1996 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku (saikin sorui nado riyo nisanka tanso koteika yuko riyo gijutsu kenkyu kaihatsu seika hokokusho (kokaiyo))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of contributing to the solution to the global environmental problem, a technology is developed in which by searching for/breeding/developing bacteria, etc. which conduct photosynthesis highly effectively, CO2 is fixed and recycled. The fiscal 1996 R and D is outlined as the utilization of bacteria, microalgae, etc. Obtained were microalgae exceeding the conventional strains in CO2 fixation ability, and bacteria/microalgae excellent in production of polysaccharides, hydrocarbon, lipid, biological active substances, etc. The fundamental study was continued of CO2 integrated enzyme function/reaction system as molecular biological breeding. In the cell fusion, a set-up of conditions for green algae was started. For the confirmation of performance of high dense/quantity culture technology using solar light, further improvement of performance and systematization, 200L scale testing equipment was manufactured. It is a collective reactor and enabled study of ventilation/agitation and control of light strength. A reactor analysis model was constructed. Also including the conversion into useful substances, energy/material balance was systematically studied. Collection of technical literature and information exchanges were made in Japan and overseas. 276 refs., 475 figs., 156 tabs.

  20. Achievement report (1/2) on R and D in fiscal 1999 on environment adaptive next-generation supersonic propulsion system. R and D of environment adaptive next-generation supersonic aircraft engine; 1999 nendo seika hokokusho. Kankyo tekigo gata jisedai choonsoku suishin system no kenkyu kaihatsu - Kankyo tekigo gata jisedai choonsokuki you enjin kaihatsu (1/2)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-12-01

    With an objective to develop an environment adaptive next-generation supersonic propulsion system, research and development have been performed on noise reducing technologies, NOx exhaust reducing technologies, CO2 exhaust reducing technologies, and environment adaptive engine systems. This paper summarizes the achievements in fiscal 1999. In the R and D of noise reducing technologies, the following activities have been carried out: selection and evaluation of ceramics as the porous sound absorbing structural material; evaluation on characteristics of axis-symmetrical mixer ejector shape; discussions on application of LES to the CFD analyzing technology; literature investigation for fan noise reduction; and design and fabrication of test equipment. In developing the NOx exhaust reducing technology, conceptual design was performed on a combustor that can achieve the NOx exhaust target, and acquire stable combustion. In addition, researches were carried out on AI control of stable combustion specific type, and AI control of NOx feedback type. In developing a heat resistant liner for the combustor, material characteristics of the CMC combustor were acquired from the tests using test pieces. Specifications were decided on a large CMC parts manufacturing equipment, and the equipment was introduced. (NEDO)

  1. Fiscal 1997 survey report. Subtask 6 (hydrogen utilization worldwide clean energy system technology) (WE-NET) (development of technology of low temperature materials); 1997 nendo seika hokokusho. Suiso riyo kokusai clean energy system gijutsu (WE-NET) subtask 6 teion zairyo gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper described the results of the development of technology of low temperature materials in the fiscal 1997 WE-NET. Using experimental equipment for materials under the atmosphere of liquid hydrogen, an experiment on mechanical characteristics under the liquid hydrogen atmosphere (20K) was conducted of the base materials of candidate steels (SUS304L, SUS316L and A5083). In material evaluation experiments (tension/fracture toughness/fracture tests), characteristic behaviors of the materials were shown which are different from those shown in the environment of liquid He (4k), etc. Even if the amount of {delta} ferrite in the metal welded of the stainless steel is small, approximately 1%, the degradation of low temperature toughness occurred. Welded joints of stainless steel by submerged arc welding and MAG welding were in now way inferior in tension characteristic to those by TIG welding, but were inferior in toughness ranging from room temperature to extremely low temperature. As to aluminum alloys, materials excellent in extremely-low temperature toughness were able to be found. Under the low temperature hydrogen gas atmosphere, the lower the strain rate is, the higher the hydrogen brittleness susceptibility is around 220K (extremely large hydrogen brittleness temperature) (SUS304L). In the hydrogen gas of 100 atm, hydrogen invades the material at 100degC, but does not at 77k. 38 refs., 173 figs., 48 tabs.

  2. Fiscal 2000 project of inviting proposals for international joint research - invitation for international proposal (Energy conservation No.4). Development of passive cooling mechanism fit for high-temperature high-humidity region; 2000 nendo kokusai kyodo kenkyu teian kobo jigyo - kokusai teian kobo (Shoe No.4). Koon tashitsu chiiki tekigogata passive reikyaku kiko no kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Efforts are made in cooperation with Vietnam to develop a heat insulating material for buildings, to be used for passive cooling mechanisms symbiotic with the environment and capable of energy conservation. Vegetables are planted on the surface of this building material. Activities are conducted in the three domains of (1) the development of energy conservation-conscious basic materials, (2) selection of vegetables, and (3) the simulation of the effect of the developed materials on temperature. The basic type of the newly developed building material is an asbestos-free vegetable fiber-reinforced cement slate which is covered by such vegetables as members of the Passifloraceae, Vitaceae, and Araliaceae. Conducted in domain (1) are surveys of the actual state of basic material manufacturing in Vietnam and studies of the basic properties of vegetable fiber, properties displayed by vegetable fiber under various chemical environments, selection of vegetable fiber as the basic aggregate, mineral fiber, and the basic material manufacturing conditions. The result of heat load calculation carried out using SMASH for Windows ver.2, which is a program developed for thermal load calculation for houses, shows that the new material lowers the temperature by approximately 3 degrees C. (NEDO)

  3. FY 1997 R/D project of industrial and scientific technologies contracted with NEDO. Report on technology development of utilization of biological resources such as bioconsortia (development of analytical techniques of bioconsortia); 1997 nendo sangyo gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu (fukugo seibutsukei kaiseki gijutsu no kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Bioconsortia are microbial composites composing of more than two kinds of microorganisms with special functions. To utilize their advanced functions, some techniques have been developed for analyzing their functions and interactions, and for identification, separation and incubation of the constituent microbial groups. In FY 1997, an investigation was made on technology trends, domestic researchers, and research topics related to bioconsortia. To manage and promote the progress of research at the National Institute of Bioscience and Human-Technology where the centralized management of this project is conducted, meetings are held once a month to examine the progress at the institute, in which reports are made and discussions are held on how each research item is progressing. In addition, meetings of the committee to promote research are held every other month to consider and examine measures required for promoting the research. Re-entrustment of research has been made on two subjects, i.e., `Studies on biological significance of symbiotic microorganisms` by Prof. Ishikawa of the University of Tokyo, and `Study on the relationship between the biosynthesis of useful terpenic materials of plant origin and the differentiation of plant tissues, and their effective production by plant cell cultures` by Prof. Inoue of Gifu Pharmaceutical University. 27 refs., 13 figs., 1 tab.

  4. Fiscal 1996 R and D under a consignment from NEDO of environmental technology such as recycling. 2. Automobile running sound reduction technology (for public); 1996 nendo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku (recycle nado kankyo gijutsu kenkyu kaihatsu). 2. Jidosha sokoon teigen gijutsu (seika hokokusho (kokaiyo ))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Tire/road noise and the running performance were studied. Test were conducted using drum testing machine. If kinds and frequencies of tires are different, noise radiation characteristics are also different, and the degree of the difference are more remarkable in tires of passenger cars than those of large sized cars. There is also observed special frequency noise caused by natural vibration of tires. Noise increases when there are translots in tires, it decreases when having the translots had angles. In hydroplaning, tires which had translots installed inclinedly generate less noise. The sound absorbing rate of the pavement using dense particle asphalt-concrete mixture is low, below 0.2, but the drainage type pavement (three kinds) showed high sound absorbing rates (0.4-0.7) in each kind. Noise reduction by the drainage type pavement was seen also in the engine type noise. Further, prediction of noise propagation was possible to a certain extent using the Allard model. As to lock braking force coefficients on the wet road, there are no definite differences between roads in terms of passenger cars, but the coefficients are higher in the drainage type pavement than that using the dense particle asphalt-concrete mixture in terms of large sized cars. On the dry road, those in the use of dense particle asphalt-concrete mixture are the highest. 3 refs., 96 figs., 11 tabs.

  5. Fiscal 1997 report on the results of the international standardization R and D. Quantification of the sensory evaluation and international standardization in the paint field; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Toryo bun`ya ni okeru kanno hyoka no teiryoka to kokusai hyojunka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Japanese paint users demand products of higher-quality than users in the U.S. and Europe, and therefore, paint makeres in Japan are making strenuous efforts to improve the product quality in terms of homogeneity, appearence and durability of the surface of paint films. However, the evaluation of paint surfaces is conducted by the qualitative sensory evaluation, resulting in obtaining no appropriate evaluation. Accordingly, the following were developed as new evaluation methods which give rational and economical indicators, contribute to shortening of the period for development of new products, and aim at the international standardization: 1) quantitative evaluation of the paint drying process; 2) image analysis of the degraded part of paint films; 3) surface analysis of paint films. In 1), a kinetic friction measuring quantitative evaluation of the surface of paint films was developed. In 2), the development of an exclusive program by the image analysis made the quantitative evaluation with high accuracy/reliability possible. In 3), an evaluation method was developed in which differences among the specimens can be detected by the chemiluminescent measurement in an extremely early stage of exposure when the gloss change just begins. As to the chalking, a new evaluation was developed in which the degree of chalking can quantitatively be evaluated by attaching a special adhesion tape to the degraded part of paint films and by the optical measurement of the degree of transparency. 101 refs., 341 figs., 118 tabs.

  6. FY 2000 Medical/engineering cooperative research project. Basic research on high-sensitivity gene-aided diagnostic systems for cancers, based on free DNA in blood; 2000 nendo kecchu yuri DNA ni yoru gan no kokando idenshi shindan system ni kansuru kiban kenkyu jisseki hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The research and development project is conducted to develop new methods directly related to early discovery of potential cancer patients, and the FY 2000 results are reported. The FY 2000 efforts are directed to improvement of intra-Alu-PCR method as the superhigh-sensitivity quantitative method, almost established in the previous fiscal year, to have higher reliability and simplicity suitable for automatic diagnosis. It is concluded that (there is no difference of significance between normal persons and cancer patients in free DNA concentration in the blood, determined by the Boyle/intra-Alu-PCR method), but this method is confirmed to be useful for prognostic monitoring of the patients who have the marrow or peripheral vessel cell transplant. Detection of qualitative gene abnormality of DNA in the peripheral vessels is investigated using the K-ras, p53 gene. Certain results are obtained by the MSA method for the former, and by the newly introduced WAVE DNA fragment analysis system for the latter. However, there are still a number of problems to be solved before these methods are applicable to screening for general medical examinations. The research on the (analysis of gene abnormality of cancer itself) has made a notable progress. (NEDO)

  7. FY 1998 report on the results of the development of utilization technology of biological resources such as bioconsortia. Development of the bioconsortia system utilization/production technology; 1998 nendo fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu seika hokokusho. Fukugo seibutsukei riyo seisan gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For the purpose of developing the industrial utilization technology, analysis was made of functions and interactions of the specified functional biological groups, and at the same time the developmental study was made of the technology to isolate/culture the constitutive biological groups. The FY 1998 results were summed up. As to the technology to detect microorganisms in soil, the SFDA method was improved and the new dyeing method was developed. And, there almost was hope for the development. Concerning the functional analysis technology, the functional substances peculiarly manifested only in the complex system in the ocean environment are searched. Several kinds of compounds were found out, and at the same time the test to confirm the biological activity is under way. Relating to the isolation/culture technology, study was made on rotten fruit, and the existence in the sample of the microorganisms which are difficult in isolation/culture was newly confirmed. In regard to the culture of the microorganisms which are difficult in isolation/culture, availability of the replica method was found out. As to the technology to produce functional substances, studies were made on the following: utilization technology of the environmental harmony type oil/water separation polymer producing microbial consortia, method to artificially make gene exchanges in the microbial consortia, etc. (NEDO)

  8. Achievement report for fiscal 1997 on the development of technologies for utilizing biological resources such as complex biosystems. Development of technologies for producing substitute fuel for petroleum by utilizing organisms; 1997 nendo fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu seika hokokusho. Seibutsu riyo sekiyu daitai nenryo seizo gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Technologies of producing useful substances using the substance decomposing/producing functions of complex biosystems and methods of their handling are developed. In the utilization of microbes in the digestive tracts of termites and longicorns, it is made clear that several kinds of termites cleave the {beta}-O-4 ether linkage. In relation to technologies for wood decomposing complex microbial system construction and complex vector system development, a screening system is constructed in which strains that exhibit complex actions are combined. Concerning the advanced utilization of tropical oil plants, conditions are determined for inducing callus out of oil palm tissues. Out of oil palm sarcocarp tissues, mRNA (messenger ribonucleic acid) is isolated for the construction of a cDNA (complementary deoxyribonucleic acid) library. For the purpose of isolating a powerful promoter, a partial base sequence is determined for ubiquitin that frequently expresses itself in cells. A pathogenic bacterium ailing the oil palm is sampled for identification, and it is inferred that the bacterium is a kind of Ganoderma boninense. (NEDO)

  9. FY 2000 report on the results of the international cooperative project. R and D of technology for creation of high performance magnetic materials using the microgravity environment; 2000 nendo bisho juryoku kankyo wo riyoshita koseino jisei zairyo sosei gijutsu no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of developing new high performance magnet/magnetostrictive materials, the paper studied the creation technology by the containerless solidification process and unidirectional solidification process using the microgravity environment, and the FY 2000 results were summed up. As to the R and D of Fe{sub 3}/Nd{sub 2}Fe{sub 14}B nanocomposite magnet, by the collision solidification process in which the uniform melt via the microgravity environment is rapidly solidified, {alpha}-Fe that is uniform in composition and is primary-phase is controlled, and the solidified texture made amorphous was successfully acquired. Further studied were the development of magnet material alloys, creation of nitride spring magnet, etc. In the study of the creation of (Dy, Tb)Fe{sub 2} base magnetostrictive materials, the maximum magnetostriction ratio of 4,300 ppm was successfully acquired by the unidirectional solidification in static magnetic field under the microgravity environment. The creation of Tb base super-magnetostrictive AB2 alloys was studied. Besides, studies were made on the formation of peritectic compounds, control of solidification texture of magnet materials, new alloy base high performance magnetic materials, etc. (NEDO)

  10. FY 2000 Report on the results of international cooperative research scheme (power generation - No.9). Research and development SiGe-based high-efficiency thermoelectric conversion materials for high temperature use; 2000 nendo kokusai kyodo kenkyu teian kobo jigyo seika hokokusho (hatsuden - No.9). SiGe kei kokoritsu koon'yo netsuden henkan zairyo no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Described herein are the FY 2000 results of the research and development of SiGe-based high-efficiency thermoelectric conversion materials for high temperature use using the microgravity test facilities, a theme adopted by the international cooperative research scheme with Sweden. The program for creating SiGe semiconductor crystal develops the splat solidification equipment, to produce the homogeneous P-doped crystal in the microgravity environment. The program for the thermosemiconductor plate produces the good sinters by the discharge plasma sintering system operating at 1,250 to 1,260 degrees C at the highest. The program for measuring the thermoelectric conversion characteristics and performance evaluation measures properties of the plate-shaped semiconductor crystal, e.g., thermal conductivity, electrical conductivity and Hall efficiency, in cooperation with Sweden's Charmars Institute of Technology. It is found that the plate-shaped sinter of the homogeneous SiGe semiconductor crystal, prepared in the microgravity environment, shows higher thermoelectric characteristics than the one prepared by the arc melting method. However, its thermoelectric conversion is fairly lower than the target 6%. (NEDO)

  11. Report on research achievement in relation with developing fundamental combustion control technologies in fiscal 1998. Research and development of high-performance industrial furnaces; 1998 nendo nensho seigyo kiban gijutsu no kaihatsu ni kansuru kenkyu seika hokokusho. Koseino kogyoro nado ni kansuru kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Development is intended to be made on fundamental combustion control technologies applicable to high-performance industrial furnaces that can reduce energy consumption and respond to environment preservation requirements. With an intention to achieve reduction in combustion exhaust gases such as carbon dioxide and nitrogen oxides, fundamental studies will be made on factors to decide flame shapes as represented by high-temperature combustion and flame shape control by utilizing microgravity environment, and researches will be made on combustion systems. Devices required for the experiments were fabricated to evaluate critical combustion characteristics of flames in furnaces including industrial furnaces, analyze and evaluate flame control parameters, and study low-pollution combustion technologies. Experimental methods acquired by 1997 were used for the experiments under the microgravity environment. Evaluation experiments were performed on flame shape control technologies and flame radiation characteristics, and basic experiments on the low-pollution combustion technologies. With these experiments, elucidation of the combustion mechanisms was launched by analyzing and evaluating the acquired data. A flame experimenting device for high-temperature preheated air completed by fiscal 1997 was used to acquire such combustion characteristics data as NOx discharge characteristics when the high-temperature preheated air is used. Based on the result thereof, verification was carried out on simulation models. (NEDO)

  12. Fiscal 1997 R and D project on industrial science technology under consignment from NEDO. Report on the R and D of nonlinear optoelectronic materials; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Hisenkei hikari denshi zairyo no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    As to the development of organic base materials, the paper is going ahead with an evaluation, higher performance and further use as materials of basic optical properties of quirale nonlinear materials and organic conjugate base materials which are promising among organic low molecular materials. As the development of orientation control crystal growth technology, grooves for orientation control were formed on the surface of the lead glass substrate, from which thin film single crystals were obtained. The nonlinear response was studied of the glass where semiconducting fine particles dispersed in matrix glass. Glass scattering base prototype materials were selected by the sol-gel method and ultra-low melting-point glass method. The glass dispersion base materials by the very fast cooling method was also studied. For the purpose of realizing a high speed switching characteristic, a processing technology was developed of ultra fine particle dispersing polymer light waveguide. As to the technology for super lattice, the optimum nonlinear performance materials were selected mainly with the optimum complex super lattice base. Moreover, the three-dimensional super structuring technology was constructed to improve nonlinear optical characteristics. The comprehensive investigational study was conducted for effective promotion of the research development. 177 refs., 260 figs., 27 tabs.

  13. Fiscal 1999 achievement report. Venture seed pickup type international cooperative research project (Development of multi-beam semiconductor laser-aided preparation system for photogravure printing using water-based ink); 1999 nendo venture seeds hakkutsugata kokusai kyodo kenkyu jigyo seika hokokusho - venture seeds No.8. Suisei ink wo mochiita gurabia (oban) insatsuyo multi beam handotai laser seihan system no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the prevention of environmental contamination due to oil-based ink used in the photogravure printing process, efforts were exerted to develop a technique of laser-aided photogravure printing using a water-based ink. It was learned that the laser optical system technology of CR Corporation of Canada was practical and high in quality, and a delay occurred in the development of an evaporation type resin for use under this project. Then the initially planned design was abandoned for a type using a new optical system manufactured by CR Corporation. In the development of plate making materials, it was found that resin evaporation was incomplete in a 1-layer structure design. A 2-layer structure design was then employed instead, and the evaporation goal was achieved. Now that the optical system was changed, the resin was also replaced with a thermosensitive type, which enhanced work efficiency. The CR Corporation-manufactured laser optical system was installed on a mount, the processor system was controlled and adjusted, and a printing test was conducted using a water-based ink of German make. It was found that the product of the new system was higher in quality than that printed by the conventional mechanical perforation type printer using an oil-based ink. (NEDO)

  14. Fiscal 1997 report on the results of the international standardization R and D. Study on optimizing design/evaluation technology using quality engineering; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Hinshitsu kogaku ni yoru saitekika sekkei hyoka gijutsu ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    To take up methodology of quality engineering as ISO standards, the basic document was worked out which regulates general items for the method to evaluate the operation of various systems as function for proposal to ISO. A method is developed for evaluating the design quality by function and predicting/optimizing the quality of finished products. For the evaluation of slippage from ideal function, the SN ratio and Maharanobis`s distance are used. In the two basic working groups (WG), a document on general methods to evaluate function was made. To reinforce the basic document, WGs divided into five by content/business were set up. Each WG collected examples from the past, studied methods to evaluate function in each field, and recorded them in the document. Five experiments for each WG were conducted to verify effectiveness of the above-mentioned method to evaluate function recorded in the document. As a result, the draft to present to ISO was worked out since the experimental WGs proved the effectiveness of the method to evaluate function in each field. 85 refs., 147 figs., 185 tabs.

  15. FY 1998 annual summary report on manipulation of atomic and molecular extremes. Development of technologies for high-efficiency analysis/manipulation of DNA and the like; 1998 nendo genshi bunshi kyokugen sosa gijutsu no kenkyu kaihatsu seika hokokusho. DNA nado kokoritsu kaiseki sosa gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The objectives are set to establish the techniques for observation/manipulation of atoms and molecules, as the common basic techniques for various industrial areas, e.g., new materials, electronics, biotechnology and chemical. Development of atomic field and scanning tunneling microscopes working under extreme conditions has been pursued, in order to manipulate complex systems, such as living body. For identification of molecular species, laser-excited fluorescence is combined with scanning mechanical probing to further refine the single molecule detection/identification techniques, and the objectives are set to develop a new method for evaluating molecules in a living body using a scanning probe microscope, and also to develop a novel scanning probe microscope for molecules in a living body. The other efforts were directed to R and D of the techniques for observing structures of organic molecules and the like through the measurements of adsorption process of organic molecules and clusters on semiconductor substrates and their surface reactions, and precision measurements of vibrational conditions of adsorbed molecular species reacting in the solid-liquid interfaces by high-sensitivity Raman spectroscopy to elucidate the catalysis mechanisms at the molecular level. (NEDO)

  16. Achievement report for fiscal 1998. Research and development on a new manufacturing method for functional thin films suitable for recycling, and their application to colored glasses (the second year); 1998 nendo seika hokokusho. Recycle ni tekishita kinosei usumaku no shinki seizoho to chakushoku glass eno oyo ni kansuru kenkyu kaihatsu (dai 2 nendo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A new thin film manufacturing method is established to add a function to glass material surface, as a new material technology which harmonizes with global environment, and is suitable for resource re-utilization and energy conservation. It is intended to develop a leading technology to promote recycling of colored glasses by applying this technical method to colored glasses. Fiscal 1998 has implemented subsequently to fiscal 1997 the following subjects in the three research items composed of a new manufacturing method of functional thin films, application of the functional thin films to colored glasses, and the comprehensive investigative studies: establishment of an industrial manufacturing method for color coating liquid and evaluation of basic characteristics of the colored functional thin films, optimization of element technology for photo-sensitive gel films by means of chemically modifying metallic alkoxide, tests of forming films on glass bottles and plate glasses by using a coating machine installed in fiscal 1997, design and prototype fabrication of a new demonstration coating machine, and analysis on thermal decomposition of the colored thin films. Optimization was performed on the element technology for manufacturing sol-gel functional thin films, and a survey was carried out on recycling systems of colored glasses adopted in Europe. (NEDO)

  17. Report of the results of the fiscal 1997 regional consortium R and D project. Regional consortium field/ R and D on the technology to create new organic electroluminescence devices (first fiscal year); 1997 nendo chiiki consortium kenkyu kaihatsu jigyo. Chiiki consortium bun`ya / shin`yuki electroluminescence device no sosei gijutsu ni kansuru kenkyu kaihatsu (daiichi nendo) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper develops the R and D having as core creative technical seeds on the design principle of organic electroluminescence (EL) devices, aims at producing as products a polychrome display and a new energy saving type light source, develops new high efficient luminescent materials which support the production of products with high liability, and develops protective coats universally applicable to optical and electronic devices and sealing technology. In fiscal 1997, the following are commenced: 1) development of luminescent devices, 2) development of new luminescent agents, and 3) development of the mounting technology. In 1), the following are conducted: R and D for improvement of durability of EL devices, development of the process technology for polychroism, multi-coloring, and development of the large picture thin film formation technology. For the development of energy saving type high efficiency light source devices, a method is established for producing organic layers by a new wet coating method. In 3), the R and D are carried out of a method to form inorganic protective coats at low temperature and a method to highly evaluate structural defects in the protective coat. For the sealing of devices, low melting point glass and the forming technology are developed. 41 refs., 112 figs., 19 tabs.

  18. FY 2000 Industrial science and technology research and development themes - cooperative project with academic circles. Report on the results of research and development for creating new bioaffinity molecules using submicron beads (Research and development for creating new bioaffinity molecules using submicron beads); 2000 nendo biryushi riyogata seitai ketsugo busshitsu nado sosei gijutsu no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Described herein are the FY 2000 results of the research and development of technologies for creating new bioaffinity molecules using submicron beads, including those for organic receptor analysis and refining. The program for development and research of fixation technology develops immobilizing reaction and latex particle having cleavable linker, and synthesize small molecules for the identification of target receptors. The program for development of organic receptor refining technology directly refines cisplatin-telomere binding proteins from crude nuclear extracts of HeLa, and analyzes them; analyzes the functions of Ref-1 purified from Jurkat cell nuclear extracts as the binding protein for drug E3330 which specifically controls the transcriptive factor NF-{kappa}B; and studies LK6A having an MLR inhibiting activity, promoters for production of Alendronate, Taxol and leptin, D91-6092 as a promising anti-cancer agent, and antirheumatic, antiallergic, antitumor agents and FK506 as immunosuppressant agent. (NEDO)

  19. Fiscal 1996 project on the R and D of industrial scientific technology under consignment from NEDO. Report on the results of the R and D of technologies to invent original high-functional materials; 1996 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Kaihatsu Kiko itaku. Dokusoteki kokino zairyo sosei gijutsu no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Technologies were described of creating original high-functional materials. The paper presented the following two as fields of technology on which importance is to be placed for the future R and D from technological and socioeconomic points of view. In the field of new materials of living organism imitation type, remarkably high-performance/high-functional new materials are invented by imitating the precise function manifestation mechanism of the ultimate living organism in which a great variety of matters are in harmony with each other and manifest complicated and high-level functions. In the field of structural control/synthesis process technology, the paper is aimed at manifestation of newer and higher functions/performance and innovation of the synthesis process, and also at developing technology to precisely control structure and process of materials including surface and interface in correspondence with atomic/molecular to macro levels. Up to the present, conducted were an examination of autonomous response materials (the subtheme is a R and D of polymer/composite multi-stimuli-responsive materials) and a R and D of precise polymerization (control) polymer materials. 239 refs., 129 figs., 49 tabs.

  20. Fiscal 1997 report on the results of the international standardization R and D. Development of a test method of halogen-free flame-retardant cables and a study of the cable standards; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Non halogen nannen cable no shiken hoho kaihatsu narabini cable kikaku no kento

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    As for halogen-free flame-retardant cables with high recyclability and safety (HFFR cables), the development is being promoted in many countries as a next generation cable. The standard of HFFR cables has been set up by some countries and groups in the U.S. and Europe, but the international standard has not yet been established independently. The purpose of this R and D is the development of a test method to appropriately evaluate the performance of HFFR cables and its standardization, and the proposal of the international standardization on common items of the cable standard. A study group was sent to the U.S. and Europe to investigate the development, application status and test methods of the HFFR cable overseas. The ion chromatography and FT-IR method were studied as methods to evaluate corrosivity/toxicity of the gases emitted in combustion. The performance of HFFR cables in Japan and abroad was also evaluated mainly by IEC standards. Further, considering the results of the overseas surveys, the structure and details of the international standard plan on HFFR cables were studied, and approaches to the international standardization were studied. 32 refs., 31 figs., 54 tabs.