WorldWideScience

Sample records for chloride produces hypesthesia

  1. Intradermal administration of magnesium sulphate and magnesium chloride produces hypesthesia to mechanical but hyperalgesia to heat stimuli in humans

    Directory of Open Access Journals (Sweden)

    Ikemoto Tatsunori

    2009-08-01

    Full Text Available Abstract Background Although magnesium ions (Mg2+ are known to display many similar features to other 2+ charged cations, they seem to have quite an important and unique role in biological settings, such as NMDA blocking effect. However, the role of Mg2+ in the neural transmission system has not been studied as sufficiently as calcium ions (Ca2+. To clarify the sensory effects of Mg2+ in peripheral nervous systems, sensory changes after intradermal injection of Mg2+ were studied in humans. Methods Magnesium sulphate, magnesium chloride and saline were injected into the skin of the anterior region of forearms in healthy volunteers and injection-induced irritating pain ("irritating pain", for short, tactile sensation, tactile pressure thresholds, pinch-pain changes and intolerable heat pain thresholds of the lesion were monitored. Results Flare formation was observed immediately after magnesium sulphate or magnesium chloride injection. We found that intradermal injections of magnesium sulphate and magnesium chloride transiently caused irritating pain, hypesthesia to noxious and innocuous mechanical stimulations, whereas secondary hyperalgesia due to mechanical stimuli was not observed. In contrast to mechanical stimuli, intolerable heat pain-evoking temperature was significantly decreased at the injection site. In addition to these results, spontaneous pain was immediately attenuated by local cooling. Conclusion Membrane-stabilizing effect and peripheral NMDA-blocking effect possibly produced magnesium-induced mechanical hypesthesia, and extracellular cation-induced sensitization of TRPV1 channels was thought to be the primary mechanism of magnesium-induced heat hyperalgesia.

  2. Taste aversion learning produced by combined treatment with subthreshold radiation and lithium chloride

    International Nuclear Information System (INIS)

    These experiments were designed to determine whether treatment with two subthreshold doses of radiation or lithium chloride, either alone or in combination, could lead to taste aversion learning. The first experiment determined the thresholds for a radiation-induced taste aversion at 15-20 rad and for lithium chloride at 0.30-0.45 mEq/kg. In the second experiment it was shown that exposing rats to two doses of 15 rad separated by up to 3 hr produced a taste aversion. Treatment with two injections of lithium chloride (0.30 mEq/kg) did not produce a significant reduction in preference. Combined treatment with radiation and lithium chloride did produce a taste aversion when the two treatments were administered within 1 hr of each other. The results are discussed in terms of the implications of these findings for understanding the nature of the unconditioned stimuli leading to the acquisition of a conditioned taste aversion

  3. Metal chloride-treated graphene oxide to produce high-performance polymer solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Eun-Su; Noh, Yong-Jin; Kwon, Sung-Nam; Na, Seok-In, E-mail: nsi12@jbnu.ac.kr [Professional Graduate School of Flexible and Printable Electronics and Polymer Materials Fusion Research Center, Chonbuk National University, 664-14, Deokjin-dong, Deokjin-gu, Jeonju-si, Jeollabuk-do 561-756 (Korea, Republic of); Jeon, Ye-Jin [School of Materials Science and Engineering, Gwangju Institute of Science and Technology, Gwangju 500-712 (Korea, Republic of); Kim, Seok-Soon, E-mail: sskim@kunsan.ac.kr [Department of Nano and Chemical Engineering, Kunsan National University, Kunsan, Jeollabuk-do 753-701 (Korea, Republic of); Kim, Tae-Wook [Soft Innovative Materials Research Center, Institute of Advanced Composite Materials, Korea Institute of Science and Technology, San 101, Eunha-ri, Bongdong-eup, Wanju-gun, Jeollabuk-do 565-905 (Korea, Republic of)

    2015-07-13

    We introduce a simple but effective graphene oxide (GO) modification with metal chloride treatments to produce high-performance polymer solar cells (PSCs). The role of various metal chlorides on GO and their effects on device performances of PSCs was investigated. X-ray photoelectron spectroscopy, ultraviolet photoemission spectroscopy, and current-voltage measurement studies demonstrated that metal chloride can induce a p-doping effect and increase the GO work-function, thus resulting in an improved built-in potential and interfacial resistance in PSCs. The resultant PSCs with metal chloride exhibited improved device efficiency than those with the neat GO. Furthermore, with the metal chloride-doped GO, we finally achieved an excellent PSC-efficiency of 6.58% and a very desirable device stability, which constitute a highly similar efficiency but much better PSC life-time to conventional device with poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS). This study could be a valuable way to produce various PEDOT:PSS alternatives and beneficial for producing high-performance and cost-efficient polymeric devices.

  4. Photoelectrocatalytic decontamination of oilfield produced wastewater containing refractory organic pollutants in the presence of high concentration of chloride ions.

    Science.gov (United States)

    Li, Guiying; An, Taicheng; Chen, Jiaxin; Sheng, Guoying; Fu, Jiamo; Chen, Fanzhong; Zhang, Shanqing; Zhao, Huijun

    2006-11-16

    The feasibility study of the application of the photoelectrocatalytic decontamination of high saline produced water containing refractory organic pollutants was investigated in the slurry photoelectrocatalytic reactor with nanometer TiO2 particle prepared with sol-gel method using the acetic acid as hydrolytic catalyst. The efficiency of the photoelectrocatalytic decontamination of produced water was determined with both COD removal from the tested wastewater and the decrease of mutagenic activity evaluated by Ames tests. The experimental results showed that the photoelectrocatalysis is a quite efficient process for decontaminating the produced water, although there are high concentration of salt existed in oilfield wastewater. We found that the COD removal efficiencies by photoelectrocatalytic process are much higher than that of by photocatalytic or electrochemical oxidation individually in the photoelectrocatalytic reactor. The COD removal can be substantially improved by the added H2O2 and the generation of active chlorine from high concentration chlorides in the wastewater. The effects of various operating conditions, such as initial COD concentration, applied cell voltage, catalyst amount and initial pH value of solution, on the photoelectrocatalytic efficiencies, is also investigated in detail. The results showed that when the raw produced wastewater was diluted in a 1:1 (v/v) ratio, there is a highest COD removal efficiency. And the photoelectrocatalytic degradation of organic pollutants in saline water is much favored in acidic solution than that in neutral and/or alkaline solution. PMID:16875777

  5. Immobilization of chloride-rich radioactive wastes produced by pyrochemical operations

    Energy Technology Data Exchange (ETDEWEB)

    McDaniel, E.W.; Terry, J.W.

    1997-08-01

    A a result of its former role as a producer of nuclear weapons components, the Rocky Flats Environmental Technology Site (RFETS), Golden, Colorado accumulated a variety of plutonium-contaminated materials. When the level of contamination exceeded a predetermined level (the economic discard limit), the materials were classified as residues rather than waste and were stored for later recovery of the plutonium. Although large quantities of residues were processed, others, primarily those more difficult to process, remain in storage at the site. It is planned for the residues with lower concentrations of plutonium to be disposed of as wastes at an appropriate disposal facility, probably the Waste Isolation Pilot Plant (WIPP). Because the plutonium concentration is too high or because the physical or chemical form would be difficult to get into a form acceptable to WIPP, it may not be possible to dispose of a portion of the residues at WIPP. The pyrochemical salts are among the residues that are difficult to dispose of. For a large percentage of the pyrochemical salts, safeguards controls are required, but WIPP was not designed to accommodate safeguards controls. A potential solution would be to immobilize the salts. These immobilized salts would contain substantially higher plutonium concentrations than is currently permissible but would be suitable for disposal at WIPP. This document presents the results of a review of three immobilization technologies to determine if mature technologies exist that would be suitable to immobilize pyrochemical salts: cement-based stabilization, low-temperature vitrification, and polymer encapsulation. The authors recommend that flow sheets and life-cycle costs be developed for cement-based and low-temperature glass immobilization.

  6. Immobilization of chloride-rich radioactive wastes produced by pyrochemical operations

    International Nuclear Information System (INIS)

    A a result of its former role as a producer of nuclear weapons components, the Rocky Flats Environmental Technology Site (RFETS), Golden, Colorado accumulated a variety of plutonium-contaminated materials. When the level of contamination exceeded a predetermined level (the economic discard limit), the materials were classified as residues rather than waste and were stored for later recovery of the plutonium. Although large quantities of residues were processed, others, primarily those more difficult to process, remain in storage at the site. It is planned for the residues with lower concentrations of plutonium to be disposed of as wastes at an appropriate disposal facility, probably the Waste Isolation Pilot Plant (WIPP). Because the plutonium concentration is too high or because the physical or chemical form would be difficult to get into a form acceptable to WIPP, it may not be possible to dispose of a portion of the residues at WIPP. The pyrochemical salts are among the residues that are difficult to dispose of. For a large percentage of the pyrochemical salts, safeguards controls are required, but WIPP was not designed to accommodate safeguards controls. A potential solution would be to immobilize the salts. These immobilized salts would contain substantially higher plutonium concentrations than is currently permissible but would be suitable for disposal at WIPP. This document presents the results of a review of three immobilization technologies to determine if mature technologies exist that would be suitable to immobilize pyrochemical salts: cement-based stabilization, low-temperature vitrification, and polymer encapsulation. The authors recommend that flow sheets and life-cycle costs be developed for cement-based and low-temperature glass immobilization

  7. Investigation on pretreatment of centrifugal mother liquid produced in the production of polyvinyl chloride by air-Fenton technique.

    Science.gov (United States)

    Sun, Yingying; Hua, Xiuyi; Ge, Rui; Guo, Aitong; Guo, Zhiyong; Dong, Deming; Sun, Wentian

    2013-08-01

    Centrifugal mother liquid (CML) is one of the main sources of wastewater produced during the production of polyvinyl chloride in chlor-alkali industry. CML is a typical poorly biodegradable organic wastewater, containing many kinds of refractory pollutants. Specifically, it contains dissolved refractory polymers, especially polyvinyl alcohol (PVA), which can pass though the biotreatment processes and clog the membranes used for further treatment. In this study, to ensure the CML applicable to biotreatment and membrane treatment, a novel efficient and mild technique, air-Fenton treatment, was employed as a pretreatment technique to improve biodegradability of the CML and to break down the polymers in the CML. Firstly, the technique was optimized for the CML treatment by optimizing the main parameters, including the dosage of ferrous sulfate, initial pH of the wastewater, [H2O2]/[Fe(2+)], aeration rate, reaction time, and temperature, based on removal efficiency of COD and PVA from the CML. Then, the optimized technique was tested and evaluated. The results indicated that under the optimized conditions, the air-Fenton treatment could remove 66, 98, and 55 % of the COD, PVA, and TOC, respectively, from the CML. After the treatment, biodegradability of the wastewater increased significantly (BOD/COD increased from 0.31 to 0.68), and almost all of the PVA polymers were removed or broken down. Meanwhile, concentration of the remaining iron ions, which were added during the treatment, was also quite low (only 2.9 mg/L). Furthermore, most of the suspended materials and ammonia nitrogen, and some of the phosphorus in the wastewater were removed simultaneously.

  8. 氯化铜脱除硫化氢气体制硫磺研究%H2S Removal with Cupric Chloride for Producing Sulfur

    Institute of Scientific and Technical Information of China (English)

    张俊丰; 童志权

    2006-01-01

    A novel technology of removing H2S with cupric chloride solution was developed in this paper. Cupric as the form of CuS deposition, the CuS produced was then oxidized by excessive cupric ion in another reactor meanwhile cupric ion that has been consumed can be recovered by the oxidization of CuCl2- with oxygen in air,and the solution can be circulated. Moreover, the leaching kinetics of CuS by cupric ion was studied. The removal efficiency of H2S is close to 100%, and the required operating condition is mild. Compared with other wet oxidization methods, no raw material is consumed except O2 in air, the process has no secondary pollution and no problem of degradation and scale, and the absorbent is much stable and reliable.

  9. Treatment and utilization of waste residue produced from polyaluminium chloride process%聚合氯化铝生产废渣的处理与利用

    Institute of Scientific and Technical Information of China (English)

    李娜; 向浩; 鲁义军; 陈济美; 杜冬云

    2011-01-01

    湖北某公司在生产聚合氯化铝(PAC)的过程中产生的黏稠胶状泥渣具有弱酸性、含水量大的特点,若直接堆放填埋,易污染环境.针对该泥渣的处理和利用途径进行了实验探讨,提出了中和改性处理废渣及其利用的两种新途径.一是作建筑材料,取代部分黏土,制备烧结普通砖;二是作石油产品精炼用脱色剂的添加剂.研究结果表明:加入泥渣质量2%的生石灰,可将具有刺激性气味的酸性泥浆变成近中性或中性,无味无毒,不污染环境;改性废渣掺入质量在10%~20%时,所制成砖的质量能达到国家标准,且可降低焙烧温度50~100℃;改性后的废渣可作为脱色剂的添加剂,当渣料/基料比控制在(1:9)~(2:8)时渣料的加入不仅降低产品成本,且对脱色力和比表面两项指标影响不大,性能符合相关要求,该成果已应用于实际生产.%The polyaluminium chloride (PAC) waste residue produced by a company in Hubei province is viscous and colloidal, and of weak acidity and large moisture. If it was piled or landfilled directly,environment would be polluted. The experimental investigation was carried out for treatment and utilization of the waste. Two ways were proposed for modification and utilization of the waste. One is to be used as building materials in stead of part cement to produce fired common brick; the other is to be used as additive of decolorant for refinement of petrochemical. The results show that the acidic mud with pungent swell can be changed to near neutral or neutral, and become odorless, non-toxic and environment-friendly by adding 2% of calcium lime. When the adding amount for modifying waste is within 10%-20%, the fired bricks with it could reach the requirements of the national standard and calcination temperature did reduce about 50-100℃. The modified waste could be used as additive of decolorant. When the ratio of waste/base material was in the range of (1 : 9)-(2: 8

  10. Comparative Efficacy of Pre-feeding, Post-feeding and Combined Pre- and Post-feeding of Two Microdoses of a Potentized Homeopathic Drug, Mercurius Solubilis, in Ameliorating Genotoxic Effects Produced by Mercuric Chloride in Mice

    Directory of Open Access Journals (Sweden)

    Swapna Datta

    2004-01-01

    Full Text Available Mercury and its derivatives have become an alarming environmental problem, necessitating the search for effective antagonists, including homeopathic drugs, which are generally used in micro doses and are devoid of any palpable side-effects. On the basis of homeopathic similia principle, two potencies of Mercurius solubilis (Merc Sol-30 and Merc Sol-200 were tested by three administrative modes, i.e. pre-feeding, post-feeding and combined pre- and post-feeding, for their possible efficacy in ameliorating mercuric chloride-induced genotoxicity in mice. Healthy mice, Mus musculus, were intraperitoneally injected with 0.06% solution of mercuric chloride at the rate of 1 ml/100 g of body weight, and assessed for genotoxic effects through conventional endpoints. i.e. chromosome aberrations, micronuclei, mitotic index and sperm head abnormality, keeping suitable controls. Mercuric chloride-treated mice were divided into three sub-groups, which were orally administered with the drug prior to, after and both prior to and after injection of mercuric chloride, and their genotoxic effects were analysed at specific intervals of fixation. Mercuric chloride treatment generally produced more chromosome aberations, micronuclei and sperm head anomaly in mice, but the mitotic index appeared to be slightly reduced. While chromosome aberations, micronuclei and sperm head anomaly were generally reduced in the drug-fed series, the mitotic index showed an apparent increase. In most cases, the combined pre- and post-feeding mode appeared to show the maximum amelioration, followed by post-feeding and pre-feeding, in that order. The amelioration by Merc Sol-200 appeared to be slightly more pronounced. We conclude that potentized homeopathic drugs can serve as possible anti-genotoxic agents against specific environmental mutagens, including toxic heavy metals.

  11. Green process to recover magnesium chloride from residue solution of potassium chloride production plant

    Institute of Scientific and Technical Information of China (English)

    Lin WANG; Yunliang HE; Yanfei WANG; Ying BAO; Jingkang WANG

    2008-01-01

    The green process to recover magnesium chlor-ide from the residue solution of a potassium chloride pro-duction plant, which comes from the leach solution of a potash mine in Laos, is designed and optimized. The res-idue solution contains magnesium chloride above 25 wt-%, potassium chloride and sodium chloride together below 5 wt-% and a few other ions such as Br-, SO2-4and Ca2+. The recovery process contains two steps: the previous impurity removal operation and the two-stage evapora-tion-cooling crystallization procedure to produce magnes-ium chloride. The crystallized impurity carnallite obtained from the first step is recycled to the potassium chloride plant to recover the potassium salt. The developed process is a zero discharge one and thus fulfills the requirements for green chemical industrial production. The produced magnesium chloride is up to industrial criteria.

  12. Breeding of high azalomycin B-producing strain by microwave radiation and lanthanum chloride adding%微波诱变及添加氯化镧筛选阿扎霉素B高产菌株

    Institute of Scientific and Technical Information of China (English)

    穆云龙; 丁彦博; 蔡超靖; 单越琦; 可爱兵; 霍培元; 朱京童; 路新华

    2013-01-01

    目的 拟通过微波诱变和添加氯化镧对阿扎霉素B产生菌N98-1634进行选育,获得高产菌株.方法 对菌株进行40~240s的微波诱变,采用金黄色葡萄球菌抑菌圈法获得初筛通过株,并进行HPLC复筛获得高产菌株;在高产菌株发酵培养基中加入5~30mg/L的氯化镧考查其对阿扎霉素B合成的影响.结果 通过微波诱变选出l株阿扎霉素B产量达到945.0μg/mL的突变菌株MW-638,较出发菌株N98-1634的752.4μg/mL提高了25.6%,随后经过添加15mg/L氯化镧阿扎霉素B单位最终达到1413.8μg/mL.结论 微波诱变对提高菌株N98-1634阿扎霉素B发酵单位效果明显,诱变菌株添加适量氯化镧可以显著提高其产量.%Objective To screen high azalomycin B-producing strains by microwave radiation and adding lanthanum chloride.Methods After microwave radiation mutated the strains with 40 to 240 seconds,preliminary positive strains were picked out by measurement of the inhibitory activity to the Staphylococcus aureus.And then subsequent determination by HPLC were carried out for the high azalomycin B-producting strains.Then lanthanum chloride was added in fermentation medium of the strain with the concentration of 5~30mg/L.Results The strain MW-638 was got by microwave radiation producing azalomycin B with the yield of 945.0μg/mL which raised by 25.6% than the control.The production of MW-638 reached up to 1413.8μg/mL eventually by adding the concentration of 15mg/L lanthanum chloride.Conclusion Microwave radiation and lanthanum chloride adding could significantly improve the yield of azalomycin B.

  13. Chloride Test

    Science.gov (United States)

    ... electrolyte or metabolic panel, may be ordered when acidosis or alkalosis is suspected or when someone has ... base is lost from the body (producing metabolic acidosis ) or when a person hyperventilates (causing respiratory alkalosis ). ...

  14. Stability of succinylcholine chloride injection.

    Science.gov (United States)

    Schmutz, C W; Mühlebach, S F

    1991-03-01

    The stability of succinylcholine chloride injection prepared by a hospital pharmacy was studied under a wide variety of conditions. Batches of succinylcholine chloride injection 10 mg/mL containing sodium chloride, methyl-4-hydroxybenzoate, hydrochloric acid, and water were prepared. Samples were tested for the effect of initial pH (3.0 and 4.2) and sterilization (steam treatment at 100 degrees C for 30 minutes and 121 degrees C for 20 minutes) on stability after three weeks; long-term stability under refrigeration (12, 17, and 23 months of storage at 4 degrees C); and the effect of storage temperature (4-6 degrees C, 20-26 degrees C, 35 degrees C, and 70 degrees C) and light exposure at various intervals up to 12 months. Samples were analyzed by thin-layer chromatography (TLC) and high-performance liquid chromatography (HPLC). Unlike heating at 121 degrees C, heating at 100 degrees C produced no significant loss of succinylcholine chloride, independent of the initial pH. Succinylcholine chloride was hydrolyzed only minimally over 23 months if the solution was stored at 4-6 degrees C. A 10% loss of drug content occurred if solutions were kept at 20-26 degrees C for five months, at 35 degrees C for one month, or at 70 degrees C for one day. Initial degradation was slowed if the solution was protected from light. The assessments by TLC proved to be more sensitive than the HPLC measurements. Succinylcholine chloride injection sterilized at 100 degrees C for 30 minutes can be stored for up to five months at room temperature if protected from light. The preparation is stable for at least two years under refrigeration. PMID:2028996

  15. Factors influencing chloride deposition in a coastal hilly area and application to chloride deposition mapping

    Directory of Open Access Journals (Sweden)

    H. Guan

    2010-05-01

    Full Text Available Chloride is commonly used as an environmental tracer for studying water flow and solute transport in the environment. It is especially useful for estimating groundwater recharge based on the commonly used chloride mass balance (CMB method. Strong spatial variability in chloride deposition in coastal areas is one difficulty encountered in appropriately applying the method. A high-resolution bulk chloride deposition map in the coastal region is thus needed. The aim of this study is to construct a chloride deposition map in the Mount Lofty Ranges (MLR, a coastal hilly area of approximately 9000 km2 spatial extent in South Australia. We examined geographic (related to coastal distance, orographic, and atmospheric factors that may influence chloride deposition, using partial correlation and regression analyses. The results indicate that coastal distance, elevation, as well as terrain aspect and slope, appear to be significant factors controlling chloride deposition in the study area. Coastal distance accounts for 70% of spatial variability in bulk chloride deposition, with elevation, terrain aspect and slope an additional 15%. The results are incorporated into a de-trended residual kriging model (ASOADeK to produce a 1 km×1 km resolution bulk chloride deposition and concentration maps. The average uncertainty of the deposition map is about 20–30% in the western MLR, and 40–50% in the eastern MLR. The maps will form a useful basis for examining catchment chloride balance for the CMB application in the study area.

  16. Chloride ingress prediction

    DEFF Research Database (Denmark)

    Frederiksen, Jens Mejer; Geiker, Mette Rica

    2008-01-01

    Prediction of chloride ingress into concrete is an important part of durability design of reinforced concrete structures exposed to chloride containing environment. This paper presents experimentally based design parameters for Portland cement concretes with and without silica fume and fly ash in...

  17. Factors influencing chloride deposition in a coastal hilly area and application to chloride deposition mapping

    Directory of Open Access Journals (Sweden)

    H. Guan

    2009-09-01

    Full Text Available Chloride is commonly used as an environmental tracer for studying water flow and solute transport in the environment. It is especially useful for estimating groundwater recharge based on the commonly used chloride mass balance (CMB method. Strong spatial variability in chloride deposition in coastal areas is one difficulty encountered in appropriately applying the CMB approach. Furthermore, intensive vegetation clearance for agriculture, for example during the European settlement in many coastal areas of Australia, may have perturbed catchment chloride balance conditions for appropriate use in CMB applications. In order to deal with these issues, a high resolution chloride deposition map in the coastal region is needed. In this study, we examined geographic, orographic, and atmospheric factors influencing chloride deposition in the Mount Lofty Ranges (MLR, a coastal hilly area of approximately 9000 km2 spatial extent in South Australia, using partial correlation and regression analyses. The results indicate that coastal distance, and terrain aspect and slope are two most significant factors controlling chloride deposition. Coastal distance accounts for 65% spatial variability in chloride deposition, with terrain aspect and slope for 8%. The deposition gradient is about 0.08 gm-2 year-1 km-1 as one progresses inland. The results are incorporated into a published de-trended residual kriging approach (ASOADeK to produce a 1 km×1 km resolution annual chloride deposition map and a bulk precipitation chloride concentration map. The average uncertainty of the deposition map is about 30% in the western MLR, and over 50% in the eastern MLR. The maps will form a very useful basis for examining catchment chloride balances for use in the CMB application in the study area.

  18. Chloride ingress prediction

    DEFF Research Database (Denmark)

    Frederiksen, Jens Mejer; Geiker, Mette Rica

    2008-01-01

    makes physical sense for the design engineer, i.e. the achieved chloride diffusion coefficients at 1 year and 100 years, D1 and D100 respectively, and the corresponding achieved chloride concentrations at the exposed concrete surface, C1 and C100. Data from field exposure supports the assumption of time...... dependent surface chloride concentrations and the diffusion coefficients. Model parameters for Portland cement concretes with and without silica fume and fly ash in marine atmospheric and submerged South Scandinavian environment are suggested in a companion paper based on 10 years field exposure data....

  19. Chloride equilibrium potential in salamander cones

    Directory of Open Access Journals (Sweden)

    Bryson Eric J

    2004-12-01

    Full Text Available Abstract Background GABAergic inhibition and effects of intracellular chloride ions on calcium channel activity have been proposed to regulate neurotransmission from photoreceptors. To assess the impact of these and other chloride-dependent mechanisms on release from cones, the chloride equilibrium potential (ECl was determined in red-sensitive, large single cones from the tiger salamander retinal slice. Results Whole cell recordings were done using gramicidin perforated patch techniques to maintain endogenous Cl- levels. Membrane potentials were corrected for liquid junction potentials. Cone resting potentials were found to average -46 mV. To measure ECl, we applied long depolarizing steps to activate the calcium-activated chloride current (ICl(Ca and then determined the reversal potential for the current component that was inhibited by the Cl- channel blocker, niflumic acid. With this method, ECl was found to average -46 mV. In a complementary approach, we used a Cl-sensitive dye, MEQ, to measure the Cl- flux produced by depolarization with elevated concentrations of K+. The membrane potentials produced by the various high K+ solutions were measured in separate current clamp experiments. Consistent with electrophysiological experiments, MEQ fluorescence measurements indicated that ECl was below -36 mV. Conclusions The results of this study indicate that ECl is close to the dark resting potential. This will minimize the impact of chloride-dependent presynaptic mechanisms in cone terminals involving GABAa receptors, glutamate transporters and ICl(Ca.

  20. Microwave Mapping Demonstration Using the Thermochromic Cobalt Chloride Equilibrium

    Science.gov (United States)

    Nguyen, Vu D.; Birdwhistell, Kurt R.

    2014-01-01

    An update to the thermochromic cobalt(II) chloride equilibrium demonstration is described. Filter paper that has been saturated with aqueous cobalt(II) chloride is heated for seconds in a microwave oven, producing a color change. The resulting pink and blue map is used to colorfully demonstrate Le Châtelier's principle and to illuminate the…

  1. Chloride removal from vitrification offgas

    International Nuclear Information System (INIS)

    This study identified and investigated techniques of selectively purging chlorides from the low-level waste (LLW) vitrification process with the purge stream acceptable for burial on the Hanford Site. Chlorides will be present in high concentration in several individual feeds to the LLW Vitrification Plant. The chlorides are highly volatile in combustion type melters and are readily absorbed by wet scrubbing of the melter offgas. The Tank Waste Remediation System (TWRS) process flow sheets show that the resulting chloride rich scrub solution is recycled back to the melter. The chlorides must be purged from the recycle loop to prevent the buildup of excessively high chloride concentrations

  2. Nickel Chloride Promoted Glaser Coupling Reaction in Hot Water

    Institute of Scientific and Technical Information of China (English)

    Pin Hua LI; Lei WANG; Min WANG; Jin Can YAN

    2004-01-01

    A Glaser coupling reaction of terminal alkynes in the presence of nickel chloride without any organics and bases in hot water has been developed, which produces the corresponding homo-coupling products in good yields.

  3. THE ROLE OF CHLORIDE ANION AND CFTR IN KILLING OF PSEUDOMONAS AERUGINOSA BY NORMAL AND CF NEUTROPHILS

    OpenAIRE

    Painter, Richard G.; Bonvillain, Ryan W.; Valentine, Vincent G.; Lombard, Gisele A.; LaPlace, Stephanie G.; Nauseef, William M.; Wang, Guoshun

    2008-01-01

    Chloride anion is essential for myeloperoxidase to produce hypochlorous acid (HOCl) in neutrophils (PMNs). To define whether chloride availability to PMNs affects their HOCl production and microbicidal capacity, we examined how extracellular chloride concentration affects killing of Pseudomonas aeruginosa (PsA) by normal neutrophils. PMN-mediated bacterial killing was strongly dependent on extracellular chloride concentration. Neutrophils in a chloride-deficient medium killed PsA poorly. Howe...

  4. SEPARATION OF MAGNESIUM CHLORIDE FROM SEA WATER BY PREFERENTIAL SALT SEPARATION (PSS)

    OpenAIRE

    Khaled Zohdy, Maha Abdel Kareem and Hussein Abdel-Aal*

    2013-01-01

    Magnesium chloride is typically extracted from sea water on an industrial scale by precipitating it as magnesium hydroxide, then converting it to the chloride by adding hydrochloric acid. This process is known as the Dow process which uses the chemical approach in producing magnesium chloride. Kettani and Abdel-Aal [1], proposed a physical separation procedure known as the Preferential Salt Separation (PSS) to obtain magnesium chloride directly from sea water. In principle, the PSS concept is...

  5. [Degradation of succinylcholine chloride].

    Science.gov (United States)

    Németh, G; Török, I; Paál, T

    1993-05-01

    Quantitative thin-layer chormatographic method has been developed for the investigation of the degradation of injection formulations containing succinylcholinium chloride. The method is based on the denistometric determination of the main degradation product, choline at 430 nm after visualization with iodine vapour. The stability of the injection was investigated under various storage conditions and it has been stated that considerable decomposition takes place during as short a period as one week. PMID:8362654

  6. Macrocycle Synthesis by Chloride-Templated Amide Bond Formation.

    Science.gov (United States)

    Martí-Centelles, Vicente; Burguete, M Isabel; Luis, Santiago V

    2016-03-01

    A new family of pseudopeptidic macrocyclic compounds has been prepared involving an anion-templated amide bond formation reaction at the macrocyclization step. Chloride anion was found to be the most efficient template in the macrocyclization process, producing improved macrocyclization yields with regard to the nontemplated reaction. The data suggest a kinetic effect of the chloride template, providing an appropriate folded conformation of the open-chain precursor and reducing the energy barrier for the formation of the macrocyclic product. PMID:26820908

  7. Recovering germanium from coal ash by chlorination with ammonium chloride

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    A new process of enriching germanium from coal ash was developed. The process involves in mixing the coal ash and ammonium chloride and then roasting the mixture to produce germanium chloride that is then absorbed by dilute hydrochloric acid and hydrolyzed to germanium oxide. The germanium recovery reached to 80.2% at the optimum condition: mass ratio of NH4Cl/coal ash is 0.15, roasting temperature 400℃ and roasting time 90 min.

  8. Valyl benzyl ester chloride

    Directory of Open Access Journals (Sweden)

    Grzegorz Dutkiewicz

    2010-02-01

    Full Text Available In the title compound (systematic name: 1-benzyloxy-3-methyl-1-oxobutan-2-aminium chloride, C12H18NO2+·Cl−, the ester group is approximately planar, with a maximum deviation of 0.040 (2 Å from the least-squares plane, and makes a dihedral angle of 28.92 (16° with the phenyl ring. The crystal structure is organized by N—H...Cl hydrogen bonds which join the two components into a chain along the b axis. Pairs of chains arranged antiparallel are interconnected by further N—H...Cl hydrogen bonds, forming eight-membered rings. Similar packing modes have been observed in a number of amino acid ester halides with a short unit-cell parameter of ca 5.5 Å along the direction in which the chains run.

  9. Potassium chloride production by microcline chlorination

    Energy Technology Data Exchange (ETDEWEB)

    Orosco, Pablo, E-mail: porosco@unsl.edu.ar [Instituto de Investigaciones en Tecnología Química (INTEQUI), Chacabuco y Pedernera, San Luis (Argentina); Facultad de Química, Bioquímica y Farmacia, Universidad Nacional de San Luis, Chacabuco y Pedernera, San Luis (Argentina); Ruiz, María del Carmen [Instituto de Investigaciones en Tecnología Química (INTEQUI), Chacabuco y Pedernera, San Luis (Argentina)

    2015-08-10

    Highlights: • Use of chlorination for the KCl production. • The reagents used were microcline, hydromagnesite and chlorine. • Isothermal and non-isothermal assays were performed in Cl{sub 2}–N{sub 2} mixture. • The chlorination generated KCl at 700 °C. • The chlorination products promote KCl formation. - Abstract: The potassium chloride is one of the most important fertilizers used in agriculture. The current demand of this salt makes interesting the study of potassium chloride production from unconventional potassium resources. In this work the potassium chloride production by chlorination of microcline was investigated. The starting reagents were microcline, hydromagnesite and chlorine. Non-isothermal and isothermal chlorination assays were carried out in a thermogravimetric device adapted to work in corrosive atmospheres. The temperature effect on potassium extraction and the phase transformations produced during chlorination of microcline were studied. The reagents and reaction products were analyzed by X-ray fluorescence (XRF) and X-ray diffraction (XRD). The experimental results indicated that by chlorination of microcline an important extraction of potassium in the temperature range from 800 to 900 °C was produced. Moreover, at 800 °C the forsterite, enstatite and magnesium aluminate spinel phases were generated.

  10. 40 CFR 61.65 - Emission standard for ethylene dichloride, vinyl chloride and polyvinyl chloride plants.

    Science.gov (United States)

    2010-07-01

    ... dichloride, vinyl chloride and polyvinyl chloride plants. 61.65 Section 61.65 Protection of Environment... dichloride, vinyl chloride and polyvinyl chloride plants. An owner or operator of an ethylene dichloride, vinyl chloride, and/or polyvinyl chloride plant shall comply with the requirements of this section....

  11. Hydrolysis of ZrCl4 and HfCl4: The Initial Steps in the High-Temperature Oxidation of Metal Chlorides to Produce ZrO2 and HfO2

    Energy Technology Data Exchange (ETDEWEB)

    Fang, Zongtang; Dixon, David A.

    2013-03-08

    The gas-phase hydrolysis of MCl4 (M = Zr, Hf) to produce the initial particles on the way to zirconia and hafnia nanoparticles has been studied with electronic structure theory. The potential energy surfaces, the themochemistry of the reaction species, and the reaction paths for the initial steps of MCl4 reacting with H2O have been calculated. The hydrolysis of MCl4 at higher temperatures begins with the formation of oxychlorohydroxides followed by the elimination of HCl instead of the direct production of MOCl2 and HCl or MO2 and HCl due to the substantial endothermicities associated with the formation of gas-phase MO2. The structural properties and heats of formation of the reactants and products are consistent with the available experimental results. A number of metal oxychlorides (oxychlorohydroxides) intermediate clusters have been studied to assess their role in the production of MO2 nanoparticles. The calculated clustering reaction energies of those intermediates are highly exothermic, so they could be readily formed in the hydrolysis process. These intermediate clusters can be formed exothermically from metal oxychlorohydroxides by the elimination of one HCl or H2O molecule. Our calculations show that the mechanisms leading to the formation of MO2 nanoparticles are complicated and are accompanied by the potential production of a wide range of intermediates, as found for the production of TiO2 particles from the high-temperature oxidation of TiCl4.

  12. Sodium chloride, potassium chloride, and virulence in Listeria monocytogenes.

    OpenAIRE

    MYERS, E. R.; Dallmier, A W; Martin, S E

    1993-01-01

    Virulence, as determined in a mouse model, and the virulence factor activities of catalase, superoxide dismutase, and listeriolysin O were examined in a parental strain (10403S) and in a nonhemolytic mutant strain (DP-L224) of Listeria monocytogenes. The cells were propagated in media containing various concentrations of sodium chloride or potassium chloride. Strains 10403S and DP-L224 exhibited significant increases in catalase activity and listeriolysin O activity when grown in medium conta...

  13. Chloride channels in stroke

    Institute of Scientific and Technical Information of China (English)

    Ya-ping ZHANG; Hao ZHANG; Dayue Darrel DUAN

    2013-01-01

    Vascular remodeling of cerebral arterioles,including proliferation,migration,and apoptosis of vascular smooth muscle cells (VSMCs),is the major cause of changes in the cross-sectional area and diameter of the arteries and sudden interruption of blood flow or hemorrhage in the brain,ie,stroke.Accumulating evidence strongly supports an important role for chloride (Clˉ) channels in vascular remodeling and stroke.At least three Clˉ channel genes are expressed in VSMCs:1) the TMEM16A (or Ano1),which may encode the calcium-activated Clˉ channels (CACCs); 2) the CLC-3 Clˉ channel and Clˉ/H+ antiporter,which is closely related to the volume-regulated Clˉ channels (VRCCs); and 3) the cystic fibrosis transmembrane conductance regulator (CFTR),which encodes the PKA-and PKC-activated Clˉ channels.Activation of the CACCs by agonist-induced increase in intracellular Ca2+ causes membrane depolarization,vasoconstriction,and inhibition of VSMC proliferation.Activation of VRCCs by cell volume increase or membrane stretch promotes the production of reactive oxygen species,induces proliferation and inhibits apoptosis of VSMCs.Activation of CFTR inhibits oxidative stress and may prevent the development of hypertension.In addition,Clˉ current mediated by gammaaminobutyric acid (GABA) receptor has also been implicated a role in ischemic neuron death.This review focuses on the functional roles of Clˉ channels in the development of stroke and provides a perspective on the future directions for research and the potential to develop Clˉ channels as new targets for the prevention and treatment of stroke.

  14. Removal of chloride from electric arc furnace dust.

    Science.gov (United States)

    Chen, Wei-Sheng; Shen, Yun-Hwei; Tsai, Min-Shing; Chang, Fang-Chih

    2011-06-15

    Electric arc furnace (EAF) dust with high chloride content increases the threat of dioxin emissions and the high chloride content reduces the value of recycled zinc oxide produced by EAF dust recycling plants. This study conducts a number of laboratory experiments to determine the technical feasibility of a new dechlorination method. These methods consist of a series of roasting processes and water washing processes. In the roasting process, EAF dust was heated in a tube furnace to evaluate the parameters of atmospheric conditions, roasting temperature, and roasting time. Results indicate that sulfation roasting is more efficient in reducing chloride content than other roasting processes. The water washing process can totally remove water-soluble chloride at a solid to liquid ratio of 1:10. However, the remaining water-insoluble substance is difficult to dechlorinate. For example, lead chloride forms a hydroxyl-halide (PbOHCl) and lead chloride carbonate (Pb(2)CO(3)Cl(2)) agglutinative matrix that is hard to wash away.

  15. Mechanism of sodium chloride in promoting reduction of high-magnesium low-nickel oxide ore

    OpenAIRE

    Shiwei Zhou; Yonggang Wei; Bo Li; Hua Wang; Baozhong Ma; Chengyan Wang

    2016-01-01

    Sodium chloride has been proved that it is an effective promoter for the reduction of high-magnesium, low-nickel oxide ore. The aim of current work is to clarify the promotion behavior of sodium chloride in the roasting reduction process. The influence of moisture on the reduction of ore in the presence of sodium chloride is studied to get clear comprehension of promotion process. In the presence of moisture, the HCl is produced by pyrohydrolysis of sodium chloride for chlorinating nickel and...

  16. Contact dermatitis in workers processing polyvinyl chloride plastics.

    Science.gov (United States)

    Vidović, R; Kansky, A

    1985-01-01

    Out of 401 workers employed in a factory producing shoes from polyvinyl chloride (PVC) granulate, 388 were investigated. By patch testing with the standard tests and 4 phthalate compounds, a diagnosis of allergic contact dermatitis was confirmed in 11 of these. Six of them were sensitized to phthalates and 5 to coal tar.

  17. Chloride in vesicular trafficking and function.

    Science.gov (United States)

    Stauber, Tobias; Jentsch, Thomas J

    2013-01-01

    Luminal acidification is of pivotal importance for the physiology of the secretory and endocytic pathways and its diverse trafficking events. Acidification by the proton-pumping V-ATPase requires charge compensation by counterion currents that are commonly attributed to chloride. The molecular identification of intracellular chloride transporters and the improvement of methodologies for measuring intraorganellar pH and chloride have facilitated the investigation of the physiology of vesicular chloride transport. New data question the requirement of chloride for pH regulation of various organelles and furthermore ascribe functions to chloride that are beyond merely electrically shunting the proton pump. This review surveys the currently established and proposed intracellular chloride transporters and gives an overview of membrane-trafficking steps that are affected by the perturbation of chloride transport. Finally, potential mechanisms of membrane-trafficking modulation by chloride are discussed and put into the context of organellar ion homeostasis in general. PMID:23092411

  18. Electrochemical Chloride extraction using external electrodes?

    DEFF Research Database (Denmark)

    Ottosen, Lisbeth M.; Pedersen, Anne Juul

    2006-01-01

    Electrochemical methods for the removal of chloride from concrete have been developed and the methods are primarily designed for situations where corrosion has started due to an increased chloride concentration in the vicinity of the reinforcement. In these methods the reinforcement is used...... as the cathode. However, some unwanted side effects can occur, including alkali-silica reaction and in some cases hydrogen embrittlement. It is also suggested also to use electrochemical chloride extraction in a preventive way in constructions where chloride induced corrosion is likely to be a problem after...... a period of time, i.e. remove the chlorides before the chloride front reaches the reinforcement. If the chlorides are removed from outer few centimetres from the surface, the chloride will not reach the reinforcement and cause damage. By using the electrochemical chloride removal in this preventive way...

  19. Chloride binding of cement-based materials subjected to external chloride environment - A review

    OpenAIRE

    Yuan, Q.; Shi, C; Schutter, G. de; Audenaert, K.; Deng, D.

    2009-01-01

    This paper reviews the chloride binding of cement-based materials subjected to external chloride environments. Chloride ion exist either in the pore solution, chemically bound to the hydration products, or physically held to the surface of the hydration products. Chloride binding of cement-based material is very complicated and influenced by many factors, such as chloride concentration, cement composition, hydroxyl concentration, cation of chloride salt, temperature, supplementary cementing m...

  20. 1,5-Diaminotetrazolium chloride

    Directory of Open Access Journals (Sweden)

    Ling-Qiao Meng

    2010-04-01

    Full Text Available The title compound, CH5N6+·Cl−, crystallized with two indepedent 1,5-diaminotetrazolium cations and two independent chloride anions in the asymmetric unit. In the crystal, there are a number of N—H...Cl hydrogen-bonding interactions, which generate a three-dimensional network.

  1. Chloride : The queen of electrolytes?

    NARCIS (Netherlands)

    Berend, Kenrick; van Hulsteijn, Leonard Hendrik; Gans, Rijk O. B.

    2012-01-01

    Background: Channelopathies, defined as diseases that are caused by mutations in genes encoding ion channels, are associated with a wide variety of symptoms and have been documented extensively over the past decade. In contrast, despite the important role of chloride in serum, textbooks in general d

  2. Microbial reductive dehalogenation of vinyl chloride

    Energy Technology Data Exchange (ETDEWEB)

    Spormann, Alfred M [Stanford, CA; Muller, Jochen A [Baltimore, MD; Rosner, Bettina M [Berlin, DE; Von Abendroth, Gregory [Mannheim, DE; Meshulam-Simon, Galit [Los Angeles, CA; McCarty, Perry L [Stanford, CA

    2014-02-11

    Compositions and methods are provided that relate to the bioremediation of chlorinated ethenes, particularly the bioremediation of vinyl chloride by Dehalococcoides-like organisms. An isolated strain of bacteria, Dehalococcoides sp. strain VS, that metabolizes vinyl chloride is provided; the genetic sequence of the enzyme responsible for vinyl chloride dehalogenation; methods of assessing the capability of endogenous organisms at an environmental site to metabolize vinyl chloride; and a method of using the strains of the invention for bioremediation.

  3. Progress of Carbonation in Chloride Contaminated Concretes

    OpenAIRE

    Wang, Yaocheng; Basheer, P.A.M.; Nanukuttan, S; Bai, Y.

    2016-01-01

    Concretes used in marine environment are generally under the cyclic effect of CO2 and chloride ions (Cl-). To date, the influence of carbonation on ingress of chloride ions in concretes has been widely studied; in comparison, study on the influence of Cl- on the progress of carbonation is limited. During the study, concretes were exposed to independent and combined mechanisms of carbonation and chloride ingress regimes. Profiles of apparent pH and chloride concentration were used to indicate ...

  4. Examining the impact of heterogeneous nitryl chloride production on air quality across the United States

    OpenAIRE

    Sarwar, G.; H. Simon; P. Bhave; Yarwood, G

    2012-01-01

    The heterogeneous hydrolysis of dinitrogen pentoxide (N2O5) has typically been modeled as only producing nitric acid. However, recent field studies have confirmed that the presence of particulate chloride alters the reaction product to produce nitryl chloride (ClNO2) which undergoes photolysis to generate chlorine atoms and nitrogen dioxide (NO2). Both chlorine and NO2 affect atmospheric chemistry and air quality. We present an updated gas-phase chlorine mechanism that can b...

  5. Examining the impact of heterogeneous nitryl chloride production on air quality across the United States

    OpenAIRE

    Sarwar, G.; H. Simon; P. Bhave; Yarwood, G

    2012-01-01

    The heterogeneous hydrolysis of dinitrogen pentoxide (N2O5) has typically been modeled as only producing nitric acid. However, recent field studies have confirmed that the presence of particulate chloride alters the reaction product to produce nitryl chloride (ClNO2) which undergoes photolysis to generate chlorine atoms and nitrogen dioxide (NO2). Both chlorine and NO2 affect atm...

  6. Chloride sublimation of gold-arsenic concentrates

    International Nuclear Information System (INIS)

    Present article is devoted to chloride sublimation of gold-arsenic concentrates. The results of studies of chloride sublimation of gold-arsenic comprising concentrates of Chore deposit of Tajikistan are considered. It is found that by application sodium chloride for gold-arsenic comprising concentrates it is possible to extract gold and silver from flotation concentrates.

  7. 21 CFR 172.180 - Stannous chloride.

    Science.gov (United States)

    2010-04-01

    ... Preservatives § 172.180 Stannous chloride. The food additive stannous chloride may be safely used for color... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Stannous chloride. 172.180 Section 172.180 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR...

  8. Shock compression of polyvinyl chloride

    Science.gov (United States)

    Neogi, Anupam; Mitra, Nilanjan

    2016-04-01

    This study presents shock compression simulation of atactic polyvinyl chloride (PVC) using ab-initio and classical molecular dynamics. The manuscript also identifies the limits of applicability of classical molecular dynamics based shock compression simulation for PVC. The mechanism of bond dissociation under shock loading and its progression is demonstrated in this manuscript using the density functional theory based molecular dynamics simulations. The rate of dissociation of different bonds at different shock velocities is also presented in this manuscript.

  9. Strength, porosity, and chloride resistance of mortar using the combination of two kinds of pozzolanic materials

    Science.gov (United States)

    Rukzon, Sumrerng; Chindaprasirt, Prinya

    2013-08-01

    This article presents a study on the resistance to chloride penetration, corrosion, porosity, and strength of mortar containing fine fly ash (FA), ground rice husk-bark ash (RB), and ground bagasse ash (BA). Ordinary Portland cement (CT) was blended with a single pozzolan and two pozzolans. Strength, porosity, rapid chloride penetration, immersion, and corrosion tests were performed to characterize the mortar. Test results showed that the use of ternary blends of CT, FA, and RB or BA decreased the porosity of the mortar, as compared with binary blended mortar containing CT and RB or BA. The resistance to chloride penetration of the mortar improved substantially with partial replacement of CT with FA, RB, and BA. The use of ternary blends of CT, FA and RB or BA produced the mortar with good strength and resistance to chloride penetration. The resistance to chloride penetration was higher with an increase in the replacement level due to the reduced calcium hydroxide.

  10. Mechanism of sodium chloride in promoting reduction of high-magnesium low-nickel oxide ore.

    Science.gov (United States)

    Zhou, Shiwei; Wei, Yonggang; Li, Bo; Wang, Hua; Ma, Baozhong; Wang, Chengyan

    2016-01-01

    Sodium chloride has been proved that it is an effective promoter for the reduction of high-magnesium, low-nickel oxide ore. The aim of current work is to clarify the promotion behavior of sodium chloride in the roasting reduction process. The influence of moisture on the reduction of ore in the presence of sodium chloride is studied to get clear comprehension of promotion process. In the presence of moisture, the HCl is produced by pyrohydrolysis of sodium chloride for chlorinating nickel and iron oxides, moreover, interactions between metallic oxides and sodium chloride are also a way for chlorination at high temperature (>802 °C); subsequently, the metal chloride would be reduced by reductant. In the absence of moisture, the magnetic separation results show that the recoveries of iron and nickel have a significant increase; moreover, olivine structure would be destroyed gradually with the increase of roasting temperature in the action of sodium chloride, and the sodium chloride existed in high-magnesium, low-nickel oxide ore could make the NiO isolate from NiO-bearing minerals. The NiO reacts with Fe2O3 at high temperature to form NiFe2O4, which is conductive to the formation of Ni-Fe alloy during the reduction process. PMID:27374991

  11. Mechanism of sodium chloride in promoting reduction of high-magnesium low-nickel oxide ore

    Science.gov (United States)

    Zhou, Shiwei; Wei, Yonggang; Li, Bo; Wang, Hua; Ma, Baozhong; Wang, Chengyan

    2016-07-01

    Sodium chloride has been proved that it is an effective promoter for the reduction of high-magnesium, low-nickel oxide ore. The aim of current work is to clarify the promotion behavior of sodium chloride in the roasting reduction process. The influence of moisture on the reduction of ore in the presence of sodium chloride is studied to get clear comprehension of promotion process. In the presence of moisture, the HCl is produced by pyrohydrolysis of sodium chloride for chlorinating nickel and iron oxides, moreover, interactions between metallic oxides and sodium chloride are also a way for chlorination at high temperature (>802 °C) subsequently, the metal chloride would be reduced by reductant. In the absence of moisture, the magnetic separation results show that the recoveries of iron and nickel have a significant increase; moreover, olivine structure would be destroyed gradually with the increase of roasting temperature in the action of sodium chloride, and the sodium chloride existed in high-magnesium, low-nickel oxide ore could make the NiO isolate from NiO-bearing minerals. The NiO reacts with Fe2O3 at high temperature to form NiFe2O4, which is conductive to the formation of Ni-Fe alloy during the reduction process.

  12. Mechanism of sodium chloride in promoting reduction of high-magnesium low-nickel oxide ore.

    Science.gov (United States)

    Zhou, Shiwei; Wei, Yonggang; Li, Bo; Wang, Hua; Ma, Baozhong; Wang, Chengyan

    2016-01-01

    Sodium chloride has been proved that it is an effective promoter for the reduction of high-magnesium, low-nickel oxide ore. The aim of current work is to clarify the promotion behavior of sodium chloride in the roasting reduction process. The influence of moisture on the reduction of ore in the presence of sodium chloride is studied to get clear comprehension of promotion process. In the presence of moisture, the HCl is produced by pyrohydrolysis of sodium chloride for chlorinating nickel and iron oxides, moreover, interactions between metallic oxides and sodium chloride are also a way for chlorination at high temperature (>802 °C); subsequently, the metal chloride would be reduced by reductant. In the absence of moisture, the magnetic separation results show that the recoveries of iron and nickel have a significant increase; moreover, olivine structure would be destroyed gradually with the increase of roasting temperature in the action of sodium chloride, and the sodium chloride existed in high-magnesium, low-nickel oxide ore could make the NiO isolate from NiO-bearing minerals. The NiO reacts with Fe2O3 at high temperature to form NiFe2O4, which is conductive to the formation of Ni-Fe alloy during the reduction process.

  13. Thionyl-chloride-induced lung injury and bronchiolitis obliterans

    Energy Technology Data Exchange (ETDEWEB)

    Konichezky, S.; Schattner, A.; Ezri, T.; Bokenboim, P.; Geva, D. (Kaplan Hospital, Rehovot (Israel))

    1993-09-01

    Thionyl-chloride (TCl) is used in the manufacture of lithium batteries, producing SO2 and HCl fumes on contact with water. We report two cases of accidental TCl exposure resulting in lung injury that may vary from a relatively mild and reversible interstitial lung disease to a severe form of bronchiolitis obliterans causing, after a latent period, an acute/chronic respiratory failure as well as other complications (spontaneous pneumothorax and bronchopleural fistula), previously unreported in TCl fume inhalation.

  14. REMOVAL OF CHLORIDE FROM ACIDIC SOLUTIONS USING NO2

    International Nuclear Information System (INIS)

    Chloride (Cl-) salt processing in strong acids is used to recycle plutonium (Pu) from pyrochemical residues. The Savannah River National Laboratory (SRNL) is studying the potential application of nitrogen dioxide (NO2) gas to effectively convert dissolved pyrochemical salt solutions to chloride-free solutions and improve recovery operations. An NO2 sparge has been shown to effectively remove Cl- from solutions containing 6-8 M acid (H+) and up to 5 M Cl-. Chloride removal occurs as a result of the competition of at least two reactions, one which is acid-dependent. Below 4 M H+, NO2 reacts with Cl- to produce nitrosyl chloride (ClNO). Between 6 M and 8 M H+, the reaction of hydrochloric acid (HCl) with nitric acid (HNO3), facilitated by the presence of NO2, strongly affects the rate of Cl- removal. The effect of heating the acidic Cl- salt solution without pre-heating the NO2 gas has minimal effect on Cl- removal rates when the contact times between NO2 and the salt solution are on the order of seconds

  15. Simple chloride sensors for continuous groundwater monitoring

    DEFF Research Database (Denmark)

    Thorn, Paul; Mortensen, John

    2012-01-01

    The development of chloride sensors which can be used for continuous, on-line monitoring of groundwater could be very valuable in the management of our coastal water resources. However, sensor stability, drift, and durability all need to be addressed in order for the sensors to be used...... in continuous application. This study looks at the development of a simple, inexpensive chloride electrode, and evaluates its performance under continuous use, both in the laboratory and in a field test in a monitoring well. The results from the study showed a consistent response to changing chloride...... sensor remained responsive even at low chloride concentrations, where the conductivity electrode was no longer responding to changing chloride levels. With the results, it is believed that the simple chloride sensor could be used for continuous monitoring of groundwater quality....

  16. Chloride transport and chloride thresholdvalues-Studies on concretes and mortars with Portland cement and limestone blended cement

    OpenAIRE

    Boubitsas, Dimitrios

    2015-01-01

    Reinforced concrete is one of the most widely used building materials and if it is properly designed and produced, it is an extremely durable material with a service life up to 100 years. However, under certain environmental conditions the service life of reinforced concrete structures is more limited. Deterioration of concrete structure is in most cases caused by the penetration of aggressive media from the surrounding environment. Chloride initiated reinforcement corrosion is one of t...

  17. ENVIRONMENTAL EXPOSURE TO VINYL CHLORIDE

    Directory of Open Access Journals (Sweden)

    Henryka Langauer-Lewowicka

    2010-09-01

    Full Text Available Vinyl chloride (VC monomer is a wellknown carcinogenic and mutagenic substance causes liver damages, angiosarcoma of the liver, acro – osteolysis, sclerodermalike changes in workers chronically exposed to this gas. There are following VC emitors to the environment: VC production plants, polymerization facilities and planes where polyvinyl products are fabricated. Because of that, the general population is coming into VC contact through polluted air, food and water. VC concentration in all mentioned sites is very low, often not detectable. There was found any health risk for the general population. The VC air concentration in the vicinity to antropogenic emitors is always higher. Such a situation may causes undesirable health effect for residents living in the neighbourhood. Epidemiological studies are performed to detect the adverse VC effect in selected cohorts. Non of the study did not confirmed cases of angiosarcoma among residents living near a vinyl chloride sites. VC production is growing permanently, so VC emission will be higher. Because of that health monitoring of general population and especially of selected groups seems to be necessary in the future.

  18. The Influence of Dopants on Copper Chloride Catalysts for Ethylene Oxychlorination Reaction

    OpenAIRE

    2013-01-01

    The main aim of this Ph.D. project was to study, understand and improve the current knowledge on the Cu-based catalytic reaction in the conversion of ethylene-to-1,2-dichloroethane (oxychlorination), a crucial intermediate reaction to produce PVC (poly-vinyl chloride) plastic, a second largest commodity. The main concerns of the catalyst (Copper chloride supported on a porous alumina support) are loss of the catalyst (deactivation) and getting 100% desired product (selectivity). Deactivation ...

  19. Explosion of lithium-thionyl-chloride battery due to presence of lithium nitride

    OpenAIRE

    Hennesø, E.; Hedlund, Frank Huess

    2015-01-01

    An explosion of a lithium–thionyl-chloride (Li–SOCl2) battery during production (assembly) leads to serious worker injury. The accident cell batch had been in a dry-air intermediate storage room for months before being readied with thionyl chloride electrolyte. Metallic lithium can react with atmospheric nitrogen to produce lithium nitride. Nodules of lithium nitride were found to be present on the lithium foil in other cells of the accident batch. The investigation attributed the explosion t...

  20. Influence of Chloride-Ion Adsorption Agent on Chloride Ions in Concrete and Mortar

    OpenAIRE

    Gai-Fei Peng; Nai-Qian Feng; Qi-Ming Song

    2014-01-01

    The influence of a chloride-ion adsorption agent (Cl agent in short), composed of zeolite, calcium aluminate hydrate and calcium nitrite, on the ingress of chloride ions into concrete and mortar has been experimentally studied. The permeability of concrete was measured, and the chloride ion content in mortar was tested. The experimental results reveal that the Cl agent could adsorb chloride ions effectively, which had penetrated into concrete and mortar. When the Cl agent was used at a dosage...

  1. Factors influencing chloride deposition in a coastal hilly area and application to chloride deposition mapping

    OpenAIRE

    H. Guan; Love, A. J.; C. T. Simmons; Makhnin, O.; A. S. Kayaalp

    2010-01-01

    Chloride is commonly used as an environmental tracer for studying water flow and solute transport in the environment. It is especially useful for estimating groundwater recharge based on the commonly used chloride mass balance (CMB) method. Strong spatial variability in chloride deposition in coastal areas is one difficulty encountered in appropriately applying the method. A high-resolution bulk chloride deposition map in the coastal region is thus needed. The aim of this study is to construc...

  2. Factors influencing chloride deposition in a coastal hilly area and application to chloride deposition mapping

    OpenAIRE

    H. Guan; Love, A. J.; C. T. Simmons; Makhnin, O.; A. S. Kayaalp

    2010-01-01

    Chloride is commonly used as an environmental tracer for studying water flow and solute transport in the environment. It is especially useful for estimating groundwater recharge based on the commonly used chloride mass balance (CMB) method. Strong spatial variability in chloride deposition in coastal areas is one difficulty encountered in appropriately applying the method. A high-resolution bulk chloride deposition map in the coastal region is thus needed. The aim of this st...

  3. Chloride channels and the reactions of cells to topography

    Directory of Open Access Journals (Sweden)

    Tobasnick G.

    2001-12-01

    Full Text Available The reactions of rat epitenon cells to substratum topography on the micrometric and nanometric scale such as groove-ridge structures include cell extension, elongation and orientation reactions. In this paper we report that stretch-sensitive chloride channels may be involved in the earliest stages of these reactions in epitenon fibroblast-like cells. We report that rat epitenon-cells can develop appreciable lateral mechanical tension that could stretch both the force generating cells themselves and those nearby. We show that cells in medium in which more than 80% of the chloride has been replaced by nitrate show little reaction to topography. Spreading of the cells takes place but is much reduced along the direction of the groove-ridge topography but enhanced across the topography. The chloride channel inhibitors NPPB (5-Nitro-2- (3phenylpropylamino benzoicacid 4,4'-disothiocyanostilbene-2, 2' sulphonic acid (DIDS and Chlorotoxin produce similar results which are further accentuated when these inhibitors are presented in low chloride medium. An antibody against ClC3, which has close homology to ClC5/6 also, blocked reaction to topography. These treatments have no significant effect on cell spreading on planar surfaces nor do they lead to changes in internal pH in the cells. There is a slight inhibition of rates of cell movement . Experiments using antisense oligoribonucleotides to ClC-5 or ClC-6 channel m-RNA also inhibit topographic reactions, which provides further confirmation of the hypothesis. Since the ClC-3,4 and 5 share considerable sequence similarities in the genes and in their proteins it has not been possible to make an unambigous determination of which precise chloride channel(s is (are involved.

  4. Chloride ingress in cement paste and mortar

    DEFF Research Database (Denmark)

    Jensen, Ole Mejlhede; Hansen, Per Freiesleben; Coats, Alison M.;

    1999-01-01

    modelled on Fick's law modified by a term for chloride binding. Inclusion of chloride binding significantly improves the profile shape of the modelled ingress profiles. The presence of fine aggregate and formation of interfacial transition zones at paste-aggregate boundaries does not significantly affect...

  5. Chloride ingress in cement paste and mortar

    DEFF Research Database (Denmark)

    Jensen, Ole Mejlhede; Hansen, Per Freiesleben; Coats, Alison M.;

    1999-01-01

    In this paper chloride ingress in cement paste and mortar is followed by electron probe microanalysis. The influence of several paste and exposure parameters on chloride ingress are examined (e.g., water-cement ratio, silica fume addition, exposure time, and temperature), The measurements...

  6. 75 FR 19657 - Barium Chloride From China

    Science.gov (United States)

    2010-04-15

    ... Commission found that the domestic interested party group response to its notice of institution (74 FR 31757... COMMISSION Barium Chloride From China AGENCY: United States International Trade Commission. ACTION: Notice of... chloride from China. SUMMARY: The Commission hereby gives notice that it will proceed with a full...

  7. Chloride binding site of neurotransmitter sodium symporters

    DEFF Research Database (Denmark)

    Kantcheva, Adriana Krassimirova; Quick, Matthias; Shi, Lei;

    2013-01-01

    Neurotransmitter:sodium symporters (NSSs) play a critical role in signaling by reuptake of neurotransmitters. Eukaryotic NSSs are chloride-dependent, whereas prokaryotic NSS homologs like LeuT are chloride-independent but contain an acidic residue (Glu290 in LeuT) at a site where eukaryotic NSSs...

  8. Chronopotentiometric chloride sensing using transition time measurement

    NARCIS (Netherlands)

    Abbas, Y.; Graaf, de D.B.; Olthuis, W.; Berg, van den A.

    2013-01-01

    Detection of chloride ions is crucial to accurately access the concrete structure durability[1]. The existing electrochemical method of chloride ions detection in concrete, potentiometry[1], is not suitable for in-situ measurement due to the long term stability issue of conventional reference electr

  9. Chemische contaminanten in diervoeder additief Choline Chloride

    NARCIS (Netherlands)

    Traag, W.A.; Hoogenboom, L.A.P.; Jong, de J.; Egmond, van H.J.; Dam, ten G.

    2010-01-01

    Dit briefrapport beschrijft de resultaten van een onderzoek naar chemische contaminanten in Choline Chloride. De doelstellingen waren: 1) Inzicht te verkrijgen in het voorkomen van (gebromeerde) vlamvertragers en broomdioxines in het diervoederadditief Choline Chloride en het, op basis van de result

  10. COMPARISON OF ROCURONIUM BROMIDE AND SUCCINYLCHOLINE CHLORIDE FOR USE DURING RAPID SEQUENCE INTUBATION IN ADULTS

    Directory of Open Access Journals (Sweden)

    Ch. Penchalaiah

    2015-08-01

    Full Text Available BACKGROUND AND OBJECTIVE : The goal of rapid sequence intubation is to secure the patients airway smoothly and quickly, minimizing the chances of regurgitation and aspiration of gastric contents. Traditionally succinylcholine chloride has been the neuromuscular blocking drug of choi ce for use in rapid sequence intubation because of its rapid onset of action and profound relaxation. Succinylcholine chloride remains unsurpassed in providing ideal intubating conditions. However the use of succinylcholine chloride is associated with many side effects like muscle pain, bradycardia, hyperkalaemia and rise in intragastric and intraocular pressure. Rocuronium bromide is the only drug currently available which has the rapidity of onset of action like succinylcholine chloride. Hence the present study was undertaken to compare rocuronium bromide with succinylcholine chloride for use during rapid sequence intubation in adult patients. METHODOLOGY : The study population consisted of 90 patients aged between 18 - 60 years posted for various elective su rgeries requiring general anaesthesia . S tudy population was randomly divided into 3 groups with 30 patients in each sub group. 1. Group I : Intubated with 1 mg kg - 1 of succinylcholine chloride (n=30 . 2. Grou p II : Intubated with rocuronium bromide 0.6 mg kg - 1 (n=30 . 3. Group III : Intubated with rocuronium bromide 0.9 mg kg - 1 (n=30 . Intubating conditions were assessed at 60 seconds based on the scale adopted by Toni Magorian et al. 1993. The haemodynamic para meters in the present study were compared using p - value obtained from student t - test . RESULTS : It was noted that succinylcholine chloride 1 mg kg - 1 body weight produced excellent intubating conditions in all patients. Rocuronium bromide 0.6 mg kg - 1 body we ight produced excellent intubating conditions in 53.33% of patients but produced good to excellent intubating conditions in 96.67% of patients. Rocuronium bromide 0.9 mg kg - 1

  11. Separation of chloride and sulfate ions in univalent and divalent cation forms from aqueous streams.

    Science.gov (United States)

    Bader, M S

    2000-04-28

    The precipitation and separation of chloride and sulfate in several cation forms (sodium, potassium, magnesium, calcium, strontium, and barium) from aqueous streams were studied using isopropylamine (IPA) and ethylamine (EA) as precipitation solvents. The precipitation fractions (P) of the tested chloride salts at 5000 and 10,000 ppm by both IPA and EA over the studied range of solvents volume ratio (V(R)) were relatively identical (18-60%) and their small variations were within their experimental uncertainty. The P of combined sulfate at 1000 ppm (56-99.5%) and chloride at 5000 ppm (28-62%) in the form of calcium by IPA over the studied range of V(R) were appreciably higher than the P of sulfate (10-98.5%) from calcium sulfate in the absence of calcium chloride, or the P of chloride (18-58%) from calcium chloride in the absence of calcium sulfate. The P of chloride from oil-field-produced waters at 106,654 ppm (20-88%) by both IPA and EA were higher than the P of chloride from diluted produced water at 20,000 (17-68%) and 10,000 ppm (16-65%) over the studied range of V(R). The small amounts of sulfate present in the produced waters (e.g., 435 ppm) were completely removed at V(R) of 0.1 (the first stage of precipitation). Consistency tests performed on the acquired data indicated a good level of experimental consistency. Two model equations (2-Suffix and 3-Suffix) derived from thermodynamic principles of solid-liquid equilibrium (SLE) criteria were employed to correlate the acquired data. While both equations were adequate for correlating the precipitation data, the 3-Suffix equation was more accurate.

  12. Diffusion behavior of chloride ions in concrete

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, T.; Gjoerv, O.E. [Norwegian Univ. of Science and Technology, Trondheim (Norway). Div. of Building Materials

    1996-06-01

    In the present paper, an analysis of the diffusion behavior of chloride ions in concrete is presented. In concentrated electrolytic aqueous solutions such as seawater or that typically used in laboratory experiments, the effect of ionic interaction may significantly reduce the chemical potential and thus the driving force of the diffusing species. Because of different drift velocities of the cations and chloride ions in the solution, the lagging motion of the cations will also retard the drift velocity of the chlorides. In addition, both the electrical double layer forming on the solid surface and the chemical binding may significantly interfere with the transport of the chloride ions. As a result, the diffusion behavior of the chloride ions in concrete is a more complex and complicated transport process than what can be described by Fick`s law of diffusion.

  13. NQR in tert-butyl chloride

    Science.gov (United States)

    Brunetti, Aldo H.

    2004-03-01

    Tert-butyl chloride has been broadly studied experimentally through various techniques such as X-ray crystallography, DTA, and NMR. It was also studied experimentally through nuclear quadrupole resonance (NQR), but this study was limited and incomplete. In this paper, we present a more detailed study of TBC through the NQR of 35Cl. Our results show that near 120 K, the onset of the CH 3 groups semirotations around symmetry axis C3 takes place with an activation energy U=16.1 kJ mol -1. This intramolecular movement produces a T1 minimum near 148 K and is the dominant mechanism of the nuclear spin-lattice relaxation in phase III of this compound. In phase II of TBC, we show that there are not only methyl groups semirotations, but also semirotations of the whole molecule around a different axis from the symmetry axis C' 3 (C-Cl bond) with an activation energy of E=10.4 kJ mol -1.

  14. Chloride diffusivity in red mud-ordinary portland cement concrete determined by migration tests

    Directory of Open Access Journals (Sweden)

    Daniel Véras Ribeiro

    2011-01-01

    Full Text Available Red mud, which is a solid waste produced in the alumina production process, is classified as dangerous due to its high pH. In this work, the concentration of chlorides was monitored by measuring the conductivity of the anolyte, which initially was distilled water. The steady and nonsteady-state chloride diffusion coefficients were estimated from the "time lag"� and "equivalent time" between diffusion and migration experiments. The capillary water absorption, apparent porosity and pore size distribution of concretes were also analyzed. The addition of red mud apparently ensured lower chloride diffusion in the tested mixtures due to its superfine particle-size distribution and its "filler"� effect. Red mud lengthened the service life of the concrete to 35 years (double that of the reference concrete. This finding is very positive since it indicates a delay in the onset of the rebar corrosion process caused by the migration of chloride ions.

  15. Studies on Hypokalemia Induced by Trimethyltin Chloride

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    To determine the possible relationship between plasma potassium concentration and severity of acute trimethyltin chloride (TMT) poisoning and to assess the mechanism of TMT induced hypokalemia. Methods SD rats were treated with various dosages of TMT (ip). All the indices were measured and analysed for determing their possible relations with plasma K+. Results With increase of dosage, the plasma K+ level dropped rapidly, and deaths appeared more quickly. The LDs0 of TMT (ip) was 14.7 mg/kgbw. In the low dosage group (10 mg/kgbw), the plasma K+ level dropped slowly with the lowest dosage on day 6 (4.85 mmol/L). It rose again on day 11 (5.06 mmol/L), and recoverd on day 28. The poisoning signs corresponded with decline of the span of K+ level. The plasma Na+ level dropped half an hour after TMT treatment, but recovered 24 h later. In the high dosage group (46.4 mg/kgbw), the levels of plasma K+ and Na+ fell rapidly within half an hour (P<0.05), the intracellular potassium concentration of RBC did not decrerase obviously (P>0.05), the activities of Na+-K+-ATPase and Mg2+-ATPase in RBC membrane were depressed remarkably (P<0.01, P<0.05, respectively), the plasma aldosterone concentrations rose as high as tenfold (P<0.01), the arterial blood pH fell from 7.434 to 7.258 (P<0.01),pCO2 was raised from 29.62 to 45.33 mmHg (P<0.01). In the 24 h urine test, when rats were treated with TMT (21.5 mg/kgbw, ip), urine volume, urinary potassium, sodium and chloride increased significantly in comparison with those in the controls (P<0.01). Conclusion TMT could induce hypokalemia in SD rats. The available evidence suggests that TMT can induce acute renal leakage of potassium. At the same time, a significant rise of plasma aldosterone may play an important role in promoting potassium leakage from kidney to result in severe hypokalemia with inhaling acid-base abnormalities produced, which aggravate the poisoning symptoms. In the end the rats would die of respiratory

  16. Chloride Transport in Undersea Concrete Tunnel

    Directory of Open Access Journals (Sweden)

    Yuanzhu Zhang

    2016-01-01

    Full Text Available Based on water penetration in unsaturated concrete of underwater tunnel, a diffusion-advection theoretical model of chloride in undersea concrete tunnel was proposed. The basic parameters including porosity, saturated hydraulic conductivity, chloride diffusion coefficient, initial water saturation, and moisture retention function of concrete specimens with two water-binder ratios were determined through lab-scale experiments. The variation of chloride concentration with pressuring time, location, solution concentration, initial saturation, hydraulic pressure, and water-binder ratio was investigated through chloride transport tests under external water pressure. In addition, the change and distribution of chloride concentration of isothermal horizontal flow were numerically analyzed using TOUGH2 software. The results show that chloride transport in unsaturated concrete under external water pressure is a combined effect of diffusion and advection instead of diffusion. Chloride concentration increased with increasing solution concentration for diffusion and increased with an increase in water pressure and a decrease in initial saturation for advection. The dominant driving force converted with time and saturation. When predicting the service life of undersea concrete tunnel, it is suggested that advection is taken into consideration; otherwise the durability tends to be unsafe.

  17. Shelf life of unrefrigerated succinylcholine chloride injection.

    Science.gov (United States)

    Boehm, J J; Dutton, D M; Poust, R I

    1984-02-01

    The shelf life of succinylcholine chloride injection at several pH values when stored at room temperature was evaluated. Solutions containing 20 mg/ml of succinylcholine chloride were stored at 25 and 40 degrees C. The reaction was studied at pH values ranging from 3.0 to 4.5. At two-week intervals, the solutions were assayed by high-pressure liquid chromatography. The initial amount of succinylcholine chloride in all samples was 100.1 +/- 2.37% of label claim. Hydrolysis of succinylcholine chloride in unbuffered solutions followed apparent zero-order kinetics. The pH range of maximum stability was found to be from 3.75 to 4.50. Succinylcholine chloride decomposed at a considerably higher rate at 40 degrees C. Allowing for the effects of pH adjustment during manufacture and degradation during shipping, losses of 7.0% and 9.0% potency can be expected after storage at 25 degrees C for four and six weeks, respectively. Succinylcholine Chloride Injection, USP, should be stored in the refrigerator; if unbuffered succinylcholine chloride injection complying with USP pH limits must be stored at room temperature, it should not be kept for longer than four weeks. PMID:6702837

  18. Reliability-Based Planning of Chloride Measurements

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Engelund, S.

    1996-01-01

    on measurements of the chloride content obtained from the given structure. In the present paper optimal planning of measurements of the chloride content in reinforced concrete structures is considered. It is shown how optimal experimental plans can be obtained using FORM-analysis. Bayesian statistics are used......In reinforced concrete structures corrosion is initiated when the chloride concentration around the reinforcement exceeds a threshold value. If corrosion starts then expensive repairs can be necessary. The estimation of the probability that corrosion has been initiated in a given structure is based...

  19. Binary Nucleation of Water and Sodium Chloride

    Energy Technology Data Exchange (ETDEWEB)

    Nemec, Thomas [Institute of Thermomechanics ASCR, Prague, Czech Republic; Marsik, Frantisek [Institute of Thermomechanics ASCR, Prague, Czech Republic; Palmer, Donald [ORNL

    2005-01-01

    Nucleation processes in the binary water-sodium chloride system are investigated in the sense of the classical nucleation theory (CNT). The CNT is modified to be able to handle the electrolytic nature of the system and is employed to investigate the acceleration of the nucleation process due to the presence of sodium chloride in the steam. This phenomenon, frequently observed in the Wilson zone of steam turbines, is called early condensation. Therefore, the nucleation rates of the water-sodium chloride mixture are of key importance in the power cycle industry.

  20. Commercial Scale Cucumber Fermentations Brined with Calcium Chloride Instead of Sodium Chloride.

    Science.gov (United States)

    Pérez-Díaz, I M; McFeeters, R F; Moeller, L; Johanningsmeier, S D; Hayes, J; Fornea, D S; Rosenberg, L; Gilbert, C; Custis, N; Beene, K; Bass, D

    2015-12-01

    Development of low salt cucumber fermentation processes present opportunities to reduce the amount of sodium chloride (NaCl) that reaches fresh water streams from industrial activities. The objective of this research was to translate cucumber fermentation brined with calcium chloride (CaCl2 ) instead of NaCl to commercial scale production. Although CaCl2 brined cucumber fermentations were stable in laboratory experiments, commercial scale trials using 6440 L open-top tanks rapidly underwent secondary cucumber fermentation. It was understood that a limited air purging routine, use of a starter culture and addition of preservatives to the cover brine aids in achieving the desired complete cucumber fermentation. The modified process was used for subsequent commercial trials using 12490 and 28400 L open-top tanks packed with variable size cucumbers and from multiple lots, and cover brines containing CaCl2 and potassium sorbate to equilibrated concentrations of 100 and 6 mM, respectively. Lactobacillus plantarum LA0045 was inoculated to 10(6) CFU/mL, and air purging was applied for two 2-3 h periods per day for the first 10 d of fermentation and one 2-3 h period per day between days 11 and 14. All fermentations were completed, as evidenced by the full conversion of sugars to lactic acid, decrease in pH to 3.0, and presented microbiological stability for a minimum of 21 d. This CaCl2 process may be used to produce fermented cucumbers intended to be stored short term in a manner that reduces pollution and waste removal costs. PMID:26512798

  1. Commercial Scale Cucumber Fermentations Brined with Calcium Chloride Instead of Sodium Chloride.

    Science.gov (United States)

    Pérez-Díaz, I M; McFeeters, R F; Moeller, L; Johanningsmeier, S D; Hayes, J; Fornea, D S; Rosenberg, L; Gilbert, C; Custis, N; Beene, K; Bass, D

    2015-12-01

    Development of low salt cucumber fermentation processes present opportunities to reduce the amount of sodium chloride (NaCl) that reaches fresh water streams from industrial activities. The objective of this research was to translate cucumber fermentation brined with calcium chloride (CaCl2 ) instead of NaCl to commercial scale production. Although CaCl2 brined cucumber fermentations were stable in laboratory experiments, commercial scale trials using 6440 L open-top tanks rapidly underwent secondary cucumber fermentation. It was understood that a limited air purging routine, use of a starter culture and addition of preservatives to the cover brine aids in achieving the desired complete cucumber fermentation. The modified process was used for subsequent commercial trials using 12490 and 28400 L open-top tanks packed with variable size cucumbers and from multiple lots, and cover brines containing CaCl2 and potassium sorbate to equilibrated concentrations of 100 and 6 mM, respectively. Lactobacillus plantarum LA0045 was inoculated to 10(6) CFU/mL, and air purging was applied for two 2-3 h periods per day for the first 10 d of fermentation and one 2-3 h period per day between days 11 and 14. All fermentations were completed, as evidenced by the full conversion of sugars to lactic acid, decrease in pH to 3.0, and presented microbiological stability for a minimum of 21 d. This CaCl2 process may be used to produce fermented cucumbers intended to be stored short term in a manner that reduces pollution and waste removal costs.

  2. Surface adsorption in strontium chloride ammines

    DEFF Research Database (Denmark)

    Ammitzbøll, Andreas L.; Lysgaard, Steen; Klukowska, Agata;

    2013-01-01

    An adsorbed state and its implications on the ab- and desorption kinetics of ammonia in strontium chloride ammine is identified using a combination of ammonia absorption measurements, thermogravimetric analysis, and density functional theory calculations. During thermogravimetric analysis, ammoni...

  3. Catastrophic event modeling. [lithium thionyl chloride batteries

    Science.gov (United States)

    Frank, H. A.

    1981-01-01

    A mathematical model for the catastrophic failures (venting or explosion of the cell) in lithium thionyl chloride batteries is presented. The phenomenology of the various processes leading to cell failure is reviewed.

  4. Telomerization of Vinyl Chloride with Chloroform Initiated by Ferrous Chloride-Dimethylacetamide under Ultrasonic Conditions

    Directory of Open Access Journals (Sweden)

    Hua Qian

    2015-01-01

    Full Text Available Telomerization of vinyl chloride with chloroform was investigated using ferrous chloride-dimethylacetamide system, and 42.1% yield, more than four times the one reported before, was achieved. The addition of ultrasound further improved the reaction and yield was raised to 51.9% with trace byproducts at highly reduced reaction time and temperature. Ferrous chloride-dimethylacetamide under ultrasonic irradiation acts as a very efficient catalyst system for the 1 : 1 telomerization.

  5. Factors influencing chloride deposition in a coastal hilly area and application to chloride deposition mapping

    OpenAIRE

    H. Guan; Love, A. J.; C. T. Simmons; A. S. Kayaalp

    2009-01-01

    Chloride is commonly used as an environmental tracer for studying water flow and solute transport in the environment. It is especially useful for estimating groundwater recharge based on the commonly used chloride mass balance (CMB) method. Strong spatial variability in chloride deposition in coastal areas is one difficulty encountered in appropriately applying the CMB approach. Furthermore, intensive vegetation clearance for agriculture, for example during the European settlement in many...

  6. Estimating the chloride transport in cement paste

    OpenAIRE

    Princigallo, A.

    2012-01-01

    A method was developed to measure the diffusion coefficient of chloride ions in cement paste based on an analytical solution to Fick’s 2nd law in a cylindrical coordinate system. This natural method yielded diffusivity results within as little as a month. Testing time was reduced by exploiting the three-dimensional inward flux in the specimen. In an attempt to determine the saturation concentration, dense portland cement pastes were exposed to a concentrated chloride solution. The method prov...

  7. The Potential Side-Effects of Chloride-Containing Disinfection%氯饮水消毒的潜在性毒副作用

    Institute of Scientific and Technical Information of China (English)

    崔颖; 王金兰; 张莉; 刘庆增

    2002-01-01

    The paper summarized the present situation of drinking water disinfectant in domestic andoverseas,demonstrated the cqrcinogen producing pathway and side effects after disinfection of chloride-containingdisinfectant, reported the measures eliminating the side effects caused by chloride - containingdrinking water disinfectant and the writers think that the disinfection method with large dosage chloride -containing disinfectant at the present must be improved as soon as possible.

  8. Influence of Chloride-Ion Adsorption Agent on Chloride Ions in Concrete and Mortar

    Directory of Open Access Journals (Sweden)

    Gai-Fei Peng

    2014-04-01

    Full Text Available The influence of a chloride-ion adsorption agent (Cl agent in short, composed of zeolite, calcium aluminate hydrate and calcium nitrite, on the ingress of chloride ions into concrete and mortar has been experimentally studied. The permeability of concrete was measured, and the chloride ion content in mortar was tested. The experimental results reveal that the Cl agent could adsorb chloride ions effectively, which had penetrated into concrete and mortar. When the Cl agent was used at a dosage of 6% by mass of cementitious materials in mortar, the resistance to the penetration of chloride ions could be improved greatly, which was more pronounced when a combination of the Cl agent and fly ash or slag was employed. Such an effect is not the result of the low permeability of the mortar, but might be a result of the interaction between the Cl agent and the chloride ions penetrated into the mortar. There are two possible mechanisms for the interaction between the Cl agent and chloride ion ingress. One is the reaction between calcium aluminate hydrate in the Cl agent and chloride ions to form Friedel’s salt, and the other one is that calcium aluminate hydrate reacts with calcium nitrite to form AFm during the early-age hydration of mortar and later the NO2− in AFm is replaced by chloride ions, which then penetrate into the mortar, also forming Friedel’s salt. More research is needed to confirm the mechanisms.

  9. Effect of Chloride Type on Penetration of Chloride Ions in Concrete

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The influence of chloride type on the diffusivity of chloride ions in concrete was studied by experiment. The result shows that the glectric resistance of concrete and the chloride diffusion coefficient are influenced by chloride type. For the same water/cement ratio (W/C), the diffusion coefficient D in KCl solution is larger than that in NaCl solution; however, the concrete resistance in KCl solution is smaller than that in NaCl solution. The experimental result is analyzed with theory of diffusion.

  10. Multiple infrared photon dissociation of vinyl chloride. [Dehydrohalogenation

    Energy Technology Data Exchange (ETDEWEB)

    Lussier, F.M.; Steinfeld, J.I.

    1977-09-01

    Dehydrohalogenation of vinyl chloride, to form acetylene and HCl, is produced by irradiation with infrared laser pulses in the 9 to 11 ..mu..m region. The acetylene itself is broken down to yield diacetylene and elemental carbon and hydrogen when irradiated by focused laser pulses. Initial excitation into vibrational modes of different symmetry appears to be about equally effective in converting absorbed energy to chemical reaction. The results are analyzed in terms of several models for multiple infrared photon dissociation; threshold energies of 20 to 50 J/cm/sup 2/ are deduced.

  11. 21 CFR 178.3290 - Chromic chloride complexes.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Chromic chloride complexes. 178.3290 Section 178... SANITIZERS Certain Adjuvants and Production Aids § 178.3290 Chromic chloride complexes. Myristo chromic chloride complex and stearato chromic chloride complex may be safely used as release agents in the...

  12. 49 CFR 179.102-17 - Hydrogen chloride, refrigerated liquid.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Hydrogen chloride, refrigerated liquid. 179.102-17...) § 179.102-17 Hydrogen chloride, refrigerated liquid. Each tank car used to transport hydrogen chloride... on or after March 16, 2009 used for the transportation of hydrogen chloride, refrigerated...

  13. Inhibition of nitrite-induced toxicity in channel catfish by calcium chloride and sodium chloride

    Science.gov (United States)

    Tommasso J.R., Wright; Simco, B.A.; Davis, K.B.

    1980-01-01

    Environmental chloride has been shown to inhibit methemoglobin formation in fish, thereby offering a protective effect against nitrite toxicity. Channel catfish (Ictalurus punctatus) were simultaneously exposed to various environmental nitrite and chloride levels (as either CaCl2 or NaCl) in dechlorinated tap water (40 mg/L total hardness, 47 mg/L alkalinity, 4 mg/L chloride, pH = 6.9-7.1, and temperature 21-24°C). Methemoglobin levels in fish simultaneously exposed to 2.5 mg/L nitrite and up to 30 mg/L chloride as either CaCl2 or NaCl were similar but significantly lower than in unprotected fish. Exposure to 10 mg/L nitrite and 60 mg/L chloride resulted in methemoglobin levels similar to those of the controls; most unprotected fish died. Fish exposed to 10 mg/L nitrite had significantly lower methemoglobin levels when protected with 15.0 mg/L chloride as CaCl2 than with NaCl. Fish exposed to nitrite in the presence of 60 mg/L chloride (as either CaCl2 or NaCl) had similar 24-h LC50 values that were significantly elevated above those obtained in the absence of chloride. Calcium had little effect on tolerance to nitrite toxicity in channel catfish in contrast to its large effect reported in steelhead trout (Salmo gairdneri).

  14. Congenital Chloride Diarrhea: Diagnosis by Easy-Accessible Chloride Measurement in Feces

    Directory of Open Access Journals (Sweden)

    C. Gils

    2016-01-01

    Full Text Available Background. Congenital chloride diarrhea (CCD is an autosomal recessive disorder caused by mutations in the genes encoding the intestinal Cl−/HCO3- exchanger and is clinically characterized by watery, profound diarrhea, electrolyte disturbances, and metabolic alkalosis. The CCD diagnosis is based on the clinical symptoms and measurement of high chloride concentration in feces (>90 mmol/L and is confirmed by DNA testing. Untreated CCD is lethal, while long-term clinical outcome improves when treated correctly. Case Presentation. A 27-year-old woman had an emergency caesarian due to pain and discomfort in gestational week 36 + 4. The newborn boy had abdominal distension and yellow fluid per rectum. Therapy with intravenous glucose and sodium chloride decreased his stool frequency and improved his clinical condition. A suspicion of congenital chloride diarrhea was strongly supported using blood gas analyzer to measure an increased chloride concentration in the feces; the diagnosis was confirmed by DNA testing. Discussion. Measurement of chloride in feces using an ordinary blood gas analyzer can serve as a preliminary analysis when congenital chloride diarrhea is suspected. This measurement can be easily performed with a watery feces composition. An easy-accessible chloride measurement available will facilitate the diagnostics and support the initial treatment if CCD is suspected.

  15. Amine and Titanium (IV Chloride, Boron (III Chloride or Zirconium (IV Chloride-Promoted Baylis-Hillman Reactions

    Directory of Open Access Journals (Sweden)

    Shi-Cong Cui

    2001-10-01

    Full Text Available The Baylis-Hillman reactions of various aryl aldehydes with methyl vinyl ketone at temperatures below -20oC using Lewis acids such as titanium (IV chloride, boron (III chloride or zirconium (IV chloride in the presence of a catalytic amount of selected amines used as a Lewis bases afford the chlorinated compounds 1 as the major product in very high yields. Acrylonitrile can also undergo the same reaction to give the corresponding chlorinated product in moderate yield. A plausible reaction mechanism is proposed. However, if the reaction was carried out at room temperature (ca. 20oC, then the Z-configuration of the elimination product 3, derived from 1, was formed as the major product.

  16. Dynamic Electrochemical Measurement of Chloride Ions.

    Science.gov (United States)

    Abbas, Yawar; de Graaf, Derk B; Olthuis, Wouter; van den Berg, Albert

    2016-02-05

    This protocol describes the dynamic measurement of chloride ions using the transition time of a silver silver chloride (Ag/AgCl) electrode. Silver silver chloride electrode is used extensively for potentiometric measurement of chloride ions concentration in electrolyte. In this measurement, long-term and continuous monitoring is limited due to the inherent drift and the requirement of a stable reference electrode. We utilized the chronopotentiometric approach to minimize drift and avoid the use of a conventional reference electrode. A galvanostatic pulse is applied to an Ag/AgCl electrode which initiates a faradic reaction depleting the Cl- ions near the electrode surface. The transition time, which is the time to completely deplete the ions near the electrode surface, is a function of the ion concentration, given by the Nernst equation. The square root of the transition time is in linear relation to the chloride ion concentration. Drift of the response over two weeks is negligible (59 µM/day) when measuring 1 mM [Cl-]using a current pulse of 10 Am(-2). This is a dynamic measurement where the moment of transition time determines the response and thus is independent of the absolute potential. Any metal wire can be used as a pseudo-reference electrode, making this approach feasible for long-term measurement inside concrete structures.

  17. Internalization of cycloheptaamylose-dansyl chloride complex during labelling of surface membrane in living Paramecium aurelia cells.

    Science.gov (United States)

    Giordano, P A; Wyroba, E; Bottiroli, G

    1985-01-01

    Internalization of cycloheptaamylose-dansyl chloride complex during surface labelling of living long-term starved Paramecium aurelia cells has been observed. This process may be inhibited by pretreatment of the ciliates with dichloroisoproterenol. Uptake of cycloheptaamylose-dansyl chloride may be visualized only after UV preirradiation: the appearance of orange-fluorescing vacuoles of diameter 2.3-4.5 micron may then be observed. Microspectrographic analysis performed on the cells and dansyl derivatives indicates that this fluorescence is produced by a photochemical reaction of dansyl chloride - released from CDC complex inside the digestive vacuoles-under the influence of UV irradiation.

  18. Effects of slag and fly ash in concrete in chloride environment

    NARCIS (Netherlands)

    Polder, R.B.

    2012-01-01

    This paper addresses experience from The Netherlands with blast furnace slag and fly ash in concrete in chloride contaminated environments, both from the field and the laboratory. Use of slag produced in The Netherlands started in the 1930s and CEM III/B LH HS, with typically 70% slag, became the do

  19. Preparation of Pure Copper Powder from Acidic Copper Chloride Waste Etchant

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The method for the recycling of copper from copper chloride solution was developed. This process consists of extraction of copper, purification and particle size reduction. In the first step, reductive metal scraps were added to acidic copper chloride waste enchants produced in the PCB industry to obtain copper powder.Composition analysis showed that this powder contained impurities such as Fe, Ni, and water. So, drying and purification were carried out by using microwave and a centrifugal separator. Thereby the copper powder had a purity of higher than 99% and spherical form in morphology. The copper powder size was decreased by ball milling.

  20. Polyacrylamide/potassium-chloride mud for drilling water-sensitive shales

    Energy Technology Data Exchange (ETDEWEB)

    Clark, R.K.; Scheuerman, R.F.; Rath, H.; Van Laar, H.G.

    1976-06-01

    A shale-protective, water-base drilling fluid containing a high molecular-weight, partially hydrolyzed polyacrylamide and potassium chloride has been used in many wells around the world. A laboratory test for evaluating the ability of water-base muds to protect stressed shales under dynamic conditions was used in the initial development of the system. Field application of the polyacrylamide/potassium-chloride mud has been successful in stabilizing hard, sloughing shales in Canada and in reducing shale-related hole problems in several offshore areas. Recent use in the Canadian Arctic has extended the application to weighted muds for drilling soft, mud-producing shales.

  1. Alkali metal and ammonium chlorides in water and heavy water (binary systems)

    CERN Document Server

    Cohen-Adad, R

    1991-01-01

    This volume surveys the data available in the literature for solid-fluid solubility equilibria plus selected solid-liquid-vapour equilibria, for binary systems containing alkali and ammonium chlorides in water or heavy water. Solubilities covered are lithium chloride, sodium chloride, potassium chloride, rubidium chloride, caesium chloride and ammonium chloride in water and heavy water.

  2. Method for preparation of melts of alkali metal chlorides with highly volatile polyvalent metal chlorides

    International Nuclear Information System (INIS)

    A method for production of alkali metal (Cs, Rb, K) chloride melts with highly volatile polyvalent metal chlorides is suggested. The method consists, in saturation of alkali metal chlorides, preheated to the melting point, by volatile component vapours (titanium tetrachloride, molybdenum or tantalum pentachloride) in proportion, corresponding to the composition reguired. The saturation is realized in an evacuated vessel with two heating areas for 1-1.5 h. After gradual levelling of temperature in both areas the product is rapidly cooled. 1 fig.; 1 tab

  3. Liquid crystalline critical dynamics in decylammonium chloride

    CERN Document Server

    Lee, K W; Lee, C E; Kang, K H; Rhee, C; Kang, J K

    1999-01-01

    Collective chain dynamics and phase transitions in a model biomembrane, decylammonium chloride (C sub 1 sub 0 H sub 2 sub 1 NH sub 3 Cl), were studied by means of proton nuclear magnetic resonance. Our measurements sensitively reflect the critical dynamics associated with the smectic C to smectic A transition of the lipid bilayer.

  4. 75 FR 20625 - Barium Chloride From China

    Science.gov (United States)

    2010-04-20

    ... established a schedule for the conduct of this review (74 FR 62587, November 30, 2010). Subsequently, counsel... From the Federal Register Online via the Government Publishing Office INTERNATIONAL TRADE COMMISSION Barium Chloride From China AGENCY: United States International Trade Commission. ACTION:...

  5. Chloride migration in concrete with superabsorbent polymers

    DEFF Research Database (Denmark)

    Hasholt, Marianne Tange; Jensen, Ole Mejlhede

    2015-01-01

    Superabsorbent polymers (SAP) can be used as a means for internal curing of concrete. In the present study, the development of transport properties of concrete with SAP is investigated. The chloride migration coefficient according to NT BUILD 492 is used as a measure of this. Twenty concrete...

  6. Determination of chloride in uranium solutions

    Energy Technology Data Exchange (ETDEWEB)

    Danse, A.; Stoch, H.; Steele, T.W.

    1967-05-15

    Thiocyanate is first removed by precipitation with a small excess of a copper solution, and the cations are removed by passing the filtrate through a cation-exchange resin. The chloride is determined in the eluate by a potentiometric titration in which silver nitrate solution is used.

  7. Amperometric Sensor for Detection of Chloride Ions

    Directory of Open Access Journals (Sweden)

    Rene Kizek

    2008-09-01

    Full Text Available Chloride ion sensing is important in many fields such as clinical diagnosis, environmental monitoring and industrial applications. We have measured chloride ions at a carbon paste electrode (CPE and at a CPE modified with solid AgNO3, a solution of AgNO3 and/or solid silver particles. Detection limits (3 S/N for chloride ions were 100 μM, 100 μM and 10 μM for solid AgNO3, solution of AgNO3 and/or solid silver particles, respectively. The CPE modified with silver particles is the most sensitive to the presence chloride ions. After that we approached to the miniaturization of the whole electrochemical instrument. Measurements were carried out on miniaturized instrument consisting of a potentiostat with dimensions 35 × 166 × 125 mm, screen printed electrodes, a peristaltic pump and a PC with control software. Under the most suitable experimental conditions (Britton-Robinson buffer, pH 1.8 and working electrode potential 550 mV we estimated the limit of detection (3 S/N as 500 nM.

  8. Gebromeerde vlamvertragers en broomdioxines in Choline Chloride

    NARCIS (Netherlands)

    Egmond, van H.J.; Traag, W.A.; Hoogenboom, L.A.P.

    2008-01-01

    Sinds begin 2008 worden in het Nationaal Plan Diervoeder Choline Chloride monsters (= diervoeder additief) gevonden waarbij de DR CALUX screenings-assay een sterk verdacht signaal geeft, maar bij de GC-HRMS geen dioxines en dl-PCB's worden gevonden. Dit rapport beschrijft de resultaten van nader ond

  9. Regulated trafficking of the CFTR chloride channel

    NARCIS (Netherlands)

    Braakman, L.J.; Kleizen, B.; Jonge, H.R. de

    2000-01-01

    The cystic fibrosis transmembrane conductance regulator (CFTR), the ABC transporter encoded by the cystic fibrosis gene, is localized in the apical membrane of epithelial cells where it functions as a cyclic AMP-regulated chloride channel and as a regulator of other ion channels and transporters. Wh

  10. 21 CFR 582.3845 - Stannous chloride.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Stannous chloride. 582.3845 Section 582.3845 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Chemical Preservatives §...

  11. Chemical modification of Sago starch by solvent less esterification with fatty acid chlorides

    International Nuclear Information System (INIS)

    Sago starch was chemically modified by esterification reaction with fatty acid chlorides to produce a non-polar sago ester in the absence of an organic solvent. The sago esters were prepared by first pretreatment of sago starch with excess formic acid at 90 degree Celsius for 40 minutes followed by acetylation with acid chloride (octanoyl and lauroyl chlorides). The maximum yields of 80 % and 73 % with the same degree of substitution (DS) of 1.2 for octanoate and lauroate sago esters were obtained respectively. The presence of ester carbonyl group in the FT-IR spectra of the ester products showed that the sago starch has been esterified. The intensities of carbonyl and methyl peaks were decreased with the increasing of DS. (author)

  12. Sulfate radical-based degradation of polychlorinated biphenyls: Effects of chloride ion and reaction kinetics

    Energy Technology Data Exchange (ETDEWEB)

    Fang, Guo-Dong [Key Laboratory of Soil Environment and Pollution Remediation, Institute of Soil Science, Chinese Academy of Sciences, Nanjing 210008 (China); Graduate School of the Chinese Academy of Sciences, Beijing 100049 (China); Dionysiou, Dionysios D. [Environmental Engineering and Science Program, University of Cincinnati, Cincinnati, OH 45221-0071 (United States); Wang, Yu [Key Laboratory of Soil Environment and Pollution Remediation, Institute of Soil Science, Chinese Academy of Sciences, Nanjing 210008 (China); Graduate School of the Chinese Academy of Sciences, Beijing 100049 (China); Al-Abed, Souhail R. [National Risk Management Research Laboratory, U.S. Environmental Protection Agency, 26 West Martin Luther King Drive, Cincinnati, OH 45268 (United States); Zhou, Dong-Mei, E-mail: dmzhou@issas.ac.cn [Key Laboratory of Soil Environment and Pollution Remediation, Institute of Soil Science, Chinese Academy of Sciences, Nanjing 210008 (China)

    2012-08-15

    Highlights: Black-Right-Pointing-Pointer A kinetic model was used to predict the radical species and their distributions. Black-Right-Pointing-Pointer The generated radical species were identified by EPR. Black-Right-Pointing-Pointer The second-order rate constants of sulfate radical with PCBs were determined. - Abstract: Advanced oxidation processes (AOPs) based on sulfate radical (SO{sub 4}{center_dot}{sup -}) have been recently used for soil and groundwater remediation. The presence of chloride ion in natural or wastewater decreases the reactivity of sulfate radical system, but explanations for this behavior were inconsistent, and the mechanisms are poorly understood. Therefore, in this paper we investigated the effect of chloride ion on the degradation of 2,4,4 Prime -CB (PCB28) and biphenyl (BP) by persulfate, based on the produced SO{sub 4}{center_dot}{sup -}. The results showed that the presence of chloride ion greatly inhibited the transformation of PCB28 and BP. Transformation intermediates of BP were monitored, suggesting that the chloride ion can react with SO{sub 4}{center_dot}{sup -} to produce chlorine radical, which reacts with BP to generate chlorinated compounds. To better understand the underlying mechanisms of these processes, a kinetic model was developed for predicting the effect of chloride ion on the types of radical species and their distributions. The results showed that chloride ion could influence the selectivity of radical species and their distribution, and increase the concentration of the sum of radical species. In addition, the second-order rate constants of sulfate radical with PCBs were determined, and quantum-chemical descriptors were introduced to predict the rate constants of other PCBs based on our experimental data.

  13. Investigation of factors influencing chloride extraction efficiency during electrochemical chloride extraction from reinforcing concrete

    Science.gov (United States)

    Sharp, Stephen R.

    2005-11-01

    Electrochemical chloride extraction (ECE) is an accelerated bridge restoration method similar to cathodic protection, but operates at higher current densities and utilizes a temporary installation. Both techniques prolong the life of a bridge by reducing the corrosion rate of the reinforcing bar when properly applied. ECE achieves this by moving chlorides away from the reinforcement and out of the concrete while simultaneously increasing the alkalinity of the electrolyte near the reinforcing steel. Despite the proven success, significant use of ECE has not resulted in part due to an incomplete understanding in the following areas: (1) An estimation of the additional service life that can be expected following treatment when the treated member is again subjected to chlorides; (2) The cause of the decrease in current flow and, therefore, chloride removal rate during treatment; (3) Influence of water-to-cement (w/c) ratio and cover depth on the time required for treatment. This dissertation covers the research that is connected to the last two areas listed above. To begin examining these issues, plain carbon steel reinforcing bars (rebar) were embedded in portland cement concrete slabs of varying water-to-cement (w/c) ratios and cover depths, and then exposed to chlorides. A fraction of these slabs had sodium chloride added as an admixture, with all of the slabs subjected to cyclical ponding with a saturated solution of sodium chloride. ECE was then used to remove the chlorides from these slabs while making electrical measurements in the different layers between the rebar (cathode) and the titanium mat (anode) to follow the progress of the ECE process. During this study, it was revealed that the resistance of the outer concrete surface layer increases during ECE, inevitably restricting current flow, while the resistance of the underlying concrete decreases or remains constant. During ECE treatment, a white residue formed on the surface of the concrete. Analyses of the

  14. Viscosity and density tables of sodium chloride solutions

    Energy Technology Data Exchange (ETDEWEB)

    Fair, J.A.; Ozbek, H. (comps.)

    1977-04-01

    A file is presented containing tabulated data extracted from the scientific literature on the density and viscosity of aqueous sodium chloride solutions. Also included is a bibliography of the properties of aqueous sodium chloride solutions. (MHR)

  15. Influence of sodium chloride on wine yeast fermentation performance

    Directory of Open Access Journals (Sweden)

    Stilianos Logothetis

    2010-06-01

    Full Text Available Stilianos Logothetis1, Elias T Nerantzis2, Anna Gioulioti3, Tasos Kanelis2, Tataridis Panagiotis2, Graeme Walker11University of Abertay Dundee, School of Contemporary Sciences, Dundee, Scotland; 2TEI of Athens Department of Oenology and Spirit Technology, Biotechnology and Industrial Fermentations Lab Agiou Spiridonos, Athens, Greece; 3Ampeloiniki SA Industrial Park Thermi, Thessaloniki, GreeceAbstract: This paper concerns research into the influence of salt (sodium chloride on growth, viability and fermentation performance in a winemaking strain of the yeast, Saccharomyces cerevisiae. Experimental fermentations were conducted in both laboratory-scale and industrial-scale experiments. Preculturing yeasts in elevated levels of sodium chloride, or salt “preconditioning” led to improved fermentation performance. This was manifest by preconditioned yeasts having an improved capability to ferment high-sugar containing media with increased cell viability and with elevated levels of produced ethanol. Salt-preconditioning most likely influenced the stress-tolerance of yeasts by inducing the synthesis of key metabolites such as trehalose and glycerol. These compounds may act to improve cells’ ability to withstand osmostress and ethanol toxicity during fermentations of grape must. Industrial-scale trials using salt-preconditioned yeasts verified the benefit of this novel physiological cell engineering approach to practical winemaking fermentations.Keywords: salt, preconditioning, fermentation performance, Saccharomyces cerevisiae, wine

  16. Thyrotoxicity of the Chlorides of Cadmium and Mercury in Rabbit

    Institute of Scientific and Technical Information of China (English)

    NINAGHOSH; SHELLEYBHATTACHARYA

    1992-01-01

    Exposure to heavy metals such as cadmium and mercury is of immediate environmental concern.The present study was aimed at establishing a direct relationship between heavy metal poisoning and thyroid dysfunction.Cadmium and mercury treatment at LD50 levels resulted in severe thyrotoxicosis in the rabbit.Within 24h of intramuscular administration of cadmium chloride 15 mg·kg-1 body weight(bw)and mercury chloride20mg·kg-1 bw,thyroid peroxidase activity increased significantly over the control with a concomitant rise in the triiodothyronie(T3)titre.On the other hand,there was a remarkable fall in the thyroxine(T4)level,and the T3,T4 ratio was high as compared with the control.Evidence indicates that acute heavy metal lethality will induce immediate hyperthyroidism.It is suggested that T3-toxicosis may be produced by a preferential synthesis of T3 and/or preferential deiodination of T4 to T3.Measurement of T3 and T4 levels may thus e utilized as a reliable indicator of heavy metal lethality.

  17. Kinetics of Vinyl Chloride Polymerization with Mixture of Initiators

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Kinetic models for the rate constants of vinyl chloride polymerization in the presence of initiator mixtures were proposed. They may be used to design the initiator recipes for the vinyl chloride polymerization with uniform rate at different temperatures at which various grades of poly(vinyl chloride) will be prepared.

  18. Removal of iron contaminant from zirconium chloride solution

    International Nuclear Information System (INIS)

    This patent describes a process for eliminating iron contaminant from an aqueous zirconium chloride solution that has been contaminated with FeCl3 in a plant in which zirconium and hafnium chloride solutions are separated by a main MINK solvent extraction system and the FeCl3 is normally removed from the zirconium chloride solution by a secondary MINK solvent extraction system

  19. Revised Model of Chloride Diffusion in Concrete Bridge by Considering Complex Action of Load and Chloride Binding Capacity

    OpenAIRE

    Xiang, Yiqiang; Guo, DongMei

    2014-01-01

    Coastal concrete bridges will suffer from deterioration of RC structural performance and resistance attenuation because of the chloride penetration and other environment factors. This article discusses current different chloride diffusion models and puts forward the revised model of chloride diffusion in concrete bridge by considering the complex action of load influence and chloride-binding capacity. Comparison of numerical predicted values and relative experimental tests show the presented ...

  20. BARRIER PROPERTIES OF VINYLIDENE CHLORIDE COPOLYMERS

    Institute of Scientific and Technical Information of China (English)

    LI Yuesheng; WENG Zhixue; HUANG Zhiming; PAN Zuren

    1996-01-01

    The permeability coefficients of a series of copolymers of vinylidene chloride (VDC)with methyl acrylate (MA), butyl acrylate (BA) or vinyl chloride (VC) (as comonomer)to oxygen and carbon dioxide have been measured at 1.0 MPa and 30℃, while those to water vapor have been measured at 30℃ and 100% relative humidity. All the copolymers are semicrystalline. VDC/MA copolymers have lower melting temperature compared with VDC/BA copolymers, while that melting temperature of VDC/VC copolymer is higher than that of VDC/acrylate copolymers with the same VDC content. The barrier property of the copolymers is predominantly controlled by crystallite, free volume fraction, and cohesive energy. The permeability coefficients of VDC/MA copolymers to oxygen, carbon dioxide, and water vapor were successfully correlated with the ratio of free volume to cohesive energy.

  1. STABILISATION OF SILTY CLAY SOIL USING CHLORIDE

    Directory of Open Access Journals (Sweden)

    TAMADHER T. ABOOD

    2007-04-01

    Full Text Available The object of this paper is to investigate the effect of adding different chloride compounds including (NaCl, MgCl2, CaCl2 on the engineering properties of silty clay soil. Various amounts of salts (2%, 4%, and 8% were added to the soil to study the effect of salts on the compaction characteristics, consistency limits and compressive strength. The main findings of this study were that the increase in the percentage of each of the chloride compounds increased the maximum dry density and decrease the optimum moisture content. The liquid limit, plastic limit and plasticity index decreased with the increase in salt content. The unconfinedcompressive strength increased as the salt content increased.

  2. Chloride migration in concrete with superabsorbent polymers

    OpenAIRE

    Hasholt, Marianne Tange; Jensen, Ole Mejlhede

    2015-01-01

    Superabsorbent polymers (SAP) can be used as a means for internal curing of concrete. In the present study, the development of transport properties of concrete with SAP is investigated. The chloride migration coefficient according to NT BUILD 492 is used as a measure of this. Twenty concrete mixtures aretested 7, 14, and 28 days after casting. The development of degree of hydration is followed for 20 corresponding paste mixtures.Both when SAP is added with extra water to compensate the SAP wa...

  3. A Duplex Stainless Steel for Chloride Environments

    Science.gov (United States)

    Sridhar, N.; Kolts, J.; Flasche, L. H.

    1985-03-01

    This paper examines the effects of microstructural changes on the corrosion, stress corrosion cracking and corrosion fatigue resistance of a duplex stainless steel to chloride environments. The microstructural changes can be precipitation of phases such as sigma and carbides, or changes in the distribution of austenite and ferrite. The former can be important in hot forming operations while the latter is important in welding. The methods of minimizing these deleterious effects can sometimes be different from those used for austenitic stainless steel.

  4. Electrodeposition of Zinc from Chloride Solution

    OpenAIRE

    NAIK, Yanjerappa Arthoba; VENKATESHA, Thimmappa Venkatarangaiah

    2002-01-01

    The electroplating of zinc is carried out in the presence of 3,4,5-Trimethoxy benzaldehyde from a chloride bath. The bath constituents are optimized through Hull cell experiments. Operating parameters such as pH, temperature, and current density are also optimized. The current efficiency and throwing power are measured at different current densities. Polarization study is carried out under galvanostatic conditions. Corrosion resistance test indicated good protection of steel by the ...

  5. (tert-Butyl(2-hydroxyethylammonium chloride

    Directory of Open Access Journals (Sweden)

    Cintya Valerio-Cárdenas

    2014-07-01

    Full Text Available In the cation of the title molecular salt, C6H16NO+·Cl−, the N—C—C—O torsion angle is 176.5 (2°. In the crystal, the cations and chloride ions are linked by N—H...O and O—H...O hydrogen bonds, generating a two-dimensional network parallel to (100.

  6. Influence of chloride admixtures on cement matrix durability

    International Nuclear Information System (INIS)

    The influence of various inorganic salts, as chloride admixtures to Portland cement, on the mechanical properties and the durability of the matrix has been studied. The salts used in this study are chromium, nickel and cadmium chlorides. Improved compressive strength values are obtained which have been correlated to the stable metal hydroxide formation in high pH environment. Under static water conditions at 500C, hydrolyzed chloride ions exhibit adverse effects on the matrix durability through rapid release of calcium as calcium chloride in the initial period of leaching. On the contrary, enhanced matrix durability is obtained on long term leaching in the case of cement containing chromium chloride

  7. Boldine action against the stannous chloride effect.

    Science.gov (United States)

    Reiniger, I W; Ribeiro da Silva, C; Felzenszwalb, I; de Mattos, J C; de Oliveira, J F; da Silva Dantas, F J; Bezerra, R J; Caldeira-de-Araújo, A; Bernardo-Filho, M

    1999-12-15

    Peumus boldus extract has been used in popular medicine in the treatment of biliar litiase, hepatic insufficiency and liver congestion. Its effects are associated to the substance boldine that is present in its extract. In the present work, we evaluated the influence of boldine both in: (i) the structural conformation of a plasmid pUC 9.1 through gel electrophoresis analysis; and in (ii) the survival of the strain of Escherichia coli AB1157 submitted to reactive oxygen species (ROS), generated by a Fenton like reaction, induced by stannous chloride. Our results show a reduction of the lethal effect induced by stannous chloride on the survival of the E. coli culture in the presence of boldine. The supercoiled form of the plasmid is not modified by stannous chloride in the presence of boldine. We suggest that the protection induced by boldine could be explained by its anti-oxidant mechanism. In this way, the boldine could be reacting with stannous ions, protecting them against the oxidation and, consequently, avoiding the generation of ROS. PMID:10624900

  8. Understanding microwave vessel contamination by chloride species.

    Science.gov (United States)

    Recchia, Sandro; Spanu, Davide; Bianchi, Davide; Dossi, Carlo; Pozzi, Andrea; Monticelli, Damiano

    2016-10-01

    Microwaves are widely used to assist digestion, general sample treatment and synthesis. The use of aqua regia is extensively adopted for the closed vessel mineralization of samples prior to trace element detection, leading to the contamination of microwave vessels by chlorine containing species. The latter are entrapped in the polymeric matrix of the vessels, leading to memory effects that are difficult to remove, among which the risk of silver incomplete recoveries by removal of the sparingly soluble chloride is the predominant one. In the present paper, we determined by mass spectrometry that hydrogen chloride is the species entrapped in the polymeric matrix and responsible for vessel contamination. Moreover, several decontamination treatments were considered to assess their efficiency, demonstrating that several cleaning cycles with water, nitric acid or silver nitrate in nitric acid were inefficient in removing chloride contamination (contamination reduction around 90%). Better results (≈95% decrease) were achieved by a single decontamination step in alkaline environment (sodium hydroxide or ammonia). Finally, a thermal treatment in a common laboratory oven (i.e. without vacuum and ventilation) was tested: a one hour heating at 150°C leads to a 98.5% decontamination, a figure higher than the ones obtained by wet treatments which requires comparable time. The latter treatment is a major advancement with respect to existing treatments as it avoids the need of a vacuum oven for at least 17h as presently proposed in the literature.

  9. An autopsy case of zinc chloride poisoning.

    Science.gov (United States)

    Kondo, Takeshi; Takahashi, Motonori; Watanabe, Seiya; Ebina, Masatomo; Mizu, Daisuke; Ariyoshi, Koichi; Asano, Migiwa; Nagasaki, Yasushi; Ueno, Yasuhiro

    2016-07-01

    Ingestion of large amounts of zinc chloride causes corrosive gastroenteritis with vomiting, abdominal pain, and diarrhea. Some individuals experience shock after ingesting large amounts of zinc chloride, resulting in fatality. Here, we present the results of an administrative autopsy performed on a 70-year-old man who ingested zinc chloride solution and died. After drinking the solution, he developed vomiting, abdominal pain, and diarrhea, and called for an ambulance. Except for tachycardia, his vital signs were stable at presentation. However, he developed hypotension and severe metabolic acidosis and died. The patient's blood zinc concentration on arrival was high at 3030μg/dL. Liver cirrhosis with cloudy yellow ascites was observed, however, there were no clear findings of gastrointestinal perforation. The gastric mucosa was gray-brown, with sclerosis present in all gastric wall layers. Zinc staining was strongly positive in all layers. There was almost no postmortem degeneration of the gastric mucosal epithelium, and hypercontracture of the smooth muscle layer was observed. Measurement of the zinc concentration in the organs revealed the highest concentration in the gastric mucosa, followed by the pancreas and spleen. Clinically, corrosive gastroenteritis was the cause of death. However, although autopsy revealed solidification in the esophagus and gastric mucosa, there were no findings in the small or large intestine. Therefore, metabolic acidosis resulting from organ damage was the direct cause of death. PMID:27497327

  10. The Accelerated Test of Chloride Permeability of Concrete

    Institute of Scientific and Technical Information of China (English)

    TAN Ke-feng; ODD E Gjφrv

    2003-01-01

    The availability of accelerated chloride permeability test and the effect of w/c ratio, incorporation of silica fume, maximum aggregate size and aggregate type on the chloride permeability were studied. The mathematic analysis certifies that there is a linear relationship between accelerated test and natural diffusion. Test results show that the chloride permeability of concrete increases as w/c ratio increases whilst a limited amount of replacement of cement with silica fume, the chloride permeability decreases dramatically. The maximum aggregate size in the range of 8 to 25 mm seems also affect chloride permeability but with a much less significant level. The chloride permeability of silica fume lightweight aggregate concrete is very low, especially the concrete made with dry lightweight concrete. The chloride permeability can be evaluated by this accelerated test method.

  11. Chloride regulates afferent arteriolar contraction in response to depolarization

    DEFF Research Database (Denmark)

    Hansen, P B; Jensen, B L; Skott, O

    1998-01-01

    -Renal vascular reactivity is influenced by the level of dietary salt intake. Recent in vitro data suggest that afferent arteriolar contractility is modulated by extracellular chloride. In the present study, we assessed the influence of chloride on K+-induced contraction in isolated perfused rabbit...... afferent arterioles. In 70% of vessels examined, K+-induced contraction was abolished by acute substitution of bath chloride. Consecutive addition of Cl- (30, 60, 80, 100, 110, and 117 mmol/L) restored the sensitivity to K+, and half-maximal response was observed at 82 mmol/L chloride. The calcium channel...... antagonist diltiazem (10(-6) mol/L) abolished K+-induced contractions. Bicarbonate did not modify the sensitivity to chloride. Norepinephrine (10(-6) mol/L) induced full contraction in depolarized vessels even in the absence of chloride. Iodide and nitrate were substituted for chloride with no inhibitory...

  12. 40 CFR 61.64 - Emission standard for polyvinyl chloride plants.

    Science.gov (United States)

    2010-07-01

    ... Standard for Vinyl Chloride § 61.64 Emission standard for polyvinyl chloride plants. An owner or operator of a polyvinyl chloride plant shall comply with the requirements of this section and § 61.65. (a... is not to exceed 0.02 g vinyl chloride/kg (0.04 lb vinyl chloride/ton) of polyvinyl chloride...

  13. Monitoring and modeling wetland chloride concentrations in relationship to oil and gas development

    Science.gov (United States)

    Post van der Burg, Max; Tangen, Brian A.

    2015-01-01

    Extraction of oil and gas via unconventional methods is becoming an important aspect of energy production worldwide. Studying the effects of this development in countries where these technologies are being widely used may provide other countries, where development may be proposed, with some insight in terms of concerns associated with development. A fairly recent expansion of unconventional oil and gas development in North America provides such an opportunity. Rapid increases in energy development in North America have caught the attention of managers and scientists as a potential stressor for wildlife and their habitats. Of particular concern in the Northern Great Plains of the U.S. is the potential for chloride-rich produced water associated with unconventional oil and gas development to alter the water chemistry of wetlands. We describe a landscape scale modeling approach designed to examine the relationship between potential chloride contamination in wetlands and patterns of oil and gas development. We used a spatial Bayesian hierarchical modeling approach to assess multiple models explaining chloride concentrations in wetlands. These models included effects related to oil and gas wells (e.g. age of wells, number of wells) and surficial geology (e.g. glacial till, outwash). We found that the model containing the number of wells and the surficial geology surrounding a wetland best explained variation in chloride concentrations. Our spatial predictions showed regions of localized high chloride concentrations. Given the spatiotemporal variability of regional wetland water chemistry, we do not regard our results as predictions of contamination, but rather as a way to identify locations that may require more intensive sampling or further investigation. We suggest that an approach like the one outlined here could easily be extended to more of an adaptive monitoring approach to answer questions about chloride contamination risk that are of interest to managers.

  14. Copper Leaching from Copper Residue with Oxygen in Sulfuric Acid/Chloride Solution DENG Tong 1,%在硫酸/氯化物深液中用氧气浸出铜渣中的铜

    Institute of Scientific and Technical Information of China (English)

    邓彤; 文震

    2000-01-01

    Leaching of a copper residue, produced by selected oxidation leaching of a nickel matte, in oxygenated sulfuric acid solution with the participation of chloride was investigated. The effects of quantity of chloride, flowrate of oxygen, concentration of sulfuric acid and temperature were discussed as leaching variables. Addition of chloride in small amount into the leach slurry was justified in enhancing copper leaching from the residue.

  15. Relation between chloride exchange diffusion and a conductive chloride pathway across the isolated skin of the toad (Bufo bufo)

    DEFF Research Database (Denmark)

    Kristensen, P; Larsen, Erik Hviid

    1978-01-01

    Substitution of chloride in the outside bathing medium of the toad skin with bromide, iodide, nitrate and sulphate leads to a reduction in the apparent exchange diffusion of chloride across this tissue, and also to a reduction of the chloride current recorded during hyperpolarization. A series...... of inhibitors (thiocyanate, furosemide, phloretin, and acetazolamide) also affects chloride exchange diffusion, hyperpolarization current as well as chloride influx during hyperpolarization. Although in some cases, effects on the short circuit current were also observed none of the effects on chloride transport....... On the basis of these findings, and the results reported in the previous paper (Hviid Larsen and Kristensen 1977) it is considered probable that the membrane molecules responsible to chloride exchange diffusion under short circuit conditions, are rearranged under the influence of a hyperpolarizing clamping...

  16. Anti-chloride permeability and anti-chloride corrodibility of a green high performance concrete admixture in concrete

    Institute of Scientific and Technical Information of China (English)

    ZHENG Yongbao; LIU Xinrong; LIU Dongyan; CHEN Jiangong; HUANG Xiongjun

    2003-01-01

    The effects of green high performance concrete (GHPC) admixture on the anti-chloride permeability and anti- chloride corrodibility of concrete are studied by a series of experiments designed on the basis of the diffusion principle and electrochemical principle. The GHPC admixture consists of fly ash, gangue, slag, red mud, etc., of which the mass fraction of industrial residues is over 96 %. The anti-permeabilities and anti-corrodibilities of the tested GHPC and normal concrete (NC) are evaluated by the Diffusion Coefficients of chloride which was obtained by measuring the concentration of chloride in the tested systems by the voltage difference method. It is found that the adoption of GHPC admixture greatly improves the anti-chloride permeability and anti-chloride corrodibility by modifying the inner structure and contracting the porosity of concrete to the reduce considerably the diffusion rate of chloride. The admixture is desirable regarding its engineering performances as well as economical and environmental interests.

  17. Histochemical demonstration of mercury in the olfactory system of salmon (Salmo salar L.) following treatments with dietary methylmercuric chloride and dissolved mercuric chloride

    DEFF Research Database (Denmark)

    Baatrup, E; Døving, K B

    1991-01-01

    The deposition of organic and inorganic mercury compounds was studied histochemically in the salmon (Salmo salar L.) olfactory system. One group of salmon was given fodder pellets containing methylmercuric chloride (CH3HgCl, 99 micrograms Hg/g) for 4 weeks. Other groups of fish were exposed...... to dissolved mercuric chloride (HgCl2, 270 micrograms Hg/liter) for 2, 6, and 12 hr, respectively. In both series of experiments, the radioisotope 203Hg was included in order to determine the accumulation of mercury in the olfactory system. Gamma-spectrometry showed that both mercury compounds accumulated...... the receptor cells, while those produced by HgCl2 exposure were situated mainly along the borders of neighboring cells. The present findings that organic and inorganic mercury compounds were deposited in the olfactory system along its whole length, from the receptor cell apices to the brain, support...

  18. Attenuation and cross-attenuation in taste aversion learning in the rat: Studies with ionizing radiation, lithium chloride and ethanol

    International Nuclear Information System (INIS)

    The preexposure paradigm was utilized to evaluate the similarity of ionizing radiation, lithium chloride and ethanol as unconditioned stimuli for the acquisition of a conditioned taste aversion. Three unpaired preexposures to lithium chloride (3.0 mEq/kg, IP) blocked the acquisition of a taste aversion when a novel sucrose solution was paired with either the injection of the same dose of lithium chloride or exposure to ionizing radiation (100 rad). Similar pretreatment with radiation blocked the acquisition of a radiation-induced aversion, but had no effect on taste aversions produced by lithium chloride (3.0 or 1.5 mEq/kg). Preexposure to ethanol (4 g/kg, PO) disrupted the acquisition of an ethanol-induced taste aversion, but not radiation- or lithium chloride-induced aversions. In contrast, preexposure to either radiation or lithium chloride attenuated an ethanol-induced taste aversion in intact rats, but not in rats with lesions of the area postrema. The results are discussed in terms of relationships between these three unconditioned stimuli and in terms of implications of these results for understanding the nature of the proximal unconditioned stimulus in taste aversion learning

  19. A solvent extraction study of molybdenum chloride and molybdenum thiocyanate complexes

    Science.gov (United States)

    Greenland, L.P.; Lillie, E.G.

    1974-01-01

    The effect of reducing agents on molybdenum(VI) solutions in hydrochloric acid was studied by a solvent extraction technique to elucidate the composition of the colored molybdenum thiocyanate complex. Neither copper(I) chloride nor ascorbic acid have any effect on the extraction of MoO2Cl2; it is inferred that tin(II) chloride reduces Mo(VI) stepwise to a polynuclear Mo(V)??Mo(VI) complex and then to Mo(V). The colored thiocyanate complex produced by copper(I) and by ascorbic acid differs only slightly in extraction characteristics from the uncolored Mo(VI) complex. It is suggested that the color may be produced by an isomerization reaction of MoO2(SCN)2, and thus that the colored species may be a hexavalent rather than pentavalent molybdenum complex. ?? 1974.

  20. Efficient and reproducible synthesis of [1-{sup 11}C]acetyl chloride using the loop method

    Energy Technology Data Exchange (ETDEWEB)

    Arai, Takuya [Department of Molecular Probes, Molecular Imaging Center, National Institute of Radiological Sciences, 4-9-1 Anagawa, Inage-ku, Chiba 263-8555 (Japan); Zhang, Ming-Rong [Department of Molecular Probes, Molecular Imaging Center, National Institute of Radiological Sciences, 4-9-1 Anagawa, Inage-ku, Chiba 263-8555 (Japan)], E-mail: zhang@nirs.go.jp; Ogawa, Masanao [Department of Molecular Probes, Molecular Imaging Center, National Institute of Radiological Sciences, 4-9-1 Anagawa, Inage-ku, Chiba 263-8555 (Japan); SHI Accelerator Service Co. Ltd., 1-17-6 Osaki, Shinagawa-ku, Tokyo 141-8686 (Japan); Fukumura, Toshimitsu; Kato, Koichi; Suzuki, Kazutoshi [Department of Molecular Probes, Molecular Imaging Center, National Institute of Radiological Sciences, 4-9-1 Anagawa, Inage-ku, Chiba 263-8555 (Japan)

    2009-02-15

    [1-{sup 11}C]Acetyl chloride ([{sup 11}C]AcCl), an important [{sup 11}C]acylating agent, was synthesized by reacting [{sup 11}C]CO{sub 2} with methylmagnesium bromide coated on the inner surface of a polyethylene loop (loop method). By optimizing the reaction conditions and synthesis parameters, [1-{sup 11}C]phenylacetate and [1-{sup 11}C]benzylacetate were produced from [{sup 11}C]AcCl in high radiochemical yield and specific activity.

  1. Kinetics of Sawdust Hydrolysis with Dilute Hydrochloric Acid and Ferrous Chloride

    Institute of Scientific and Technical Information of China (English)

    袁传敏; 颜涌捷; 任铮伟; 李庭琛; 曹建勤

    2004-01-01

    With dilute hydrochloric acid as catalyst and promoted by ferrous chloride, hydrolysis of waste sawdust to produce monosaccharides was conducted by using an one-step method in a batch-wise operation reactor. Based on the model of first order consecutive irreversible reactions, the kinetics equation incorporating the term of catalyst concentration was obtained that is suitable for describing the hydrolysis of sawdust. Activation energies were calculated for hydrolysis of sawdust and decomposition of monosaccharides.

  2. Chloride diffusion in partially saturated cementitious material

    DEFF Research Database (Denmark)

    Nielsen, Erik Pram; Geiker, Mette Rica

    2003-01-01

    The paper proposes a combined application of composite theory and Powers' model for microstructural development for the estimation of the diffusion coefficient as a function of the moisture content of a defect-free cementitious material. Measurements of chloride diffusion in mortar samples (440 kg....../m(3) rapid-hardening Portland cement, w/c = 0.5, maturity minimum 6 months) stored at 65% and 85% RH, as well as in vacuum-saturated mortar samples, illustrate the applicability of the method. (C) 2003 Elsevier Science Ltd. All rights reserved....

  3. Oral cadmium chloride intoxication in mice

    DEFF Research Database (Denmark)

    Andersen, O; Nielsen, J B; Svendsen, P

    1988-01-01

    Diethyldithiocarbamate (DDC) is known to alleviate acute toxicity due to injection of cadmium salts. However, when cadmium chloride was administered by the oral route, DDC enhanced rather than alleviated the acute toxicity; both oral and intraperitoneal (i.p.) administration of DDC had this effect....... Thus, orally administered DDC enhanced cadmium-induced duodenal and ileal tissue damage and inhibition of peristalsis, as indicated by an increased intestinal transit time. At low cadmium doses, the whole-body retention of cadmium was increased by oral DDC administration. Intraperitoneally administered...

  4. N-(2-Benzoylethylpropan-2-aminium chloride

    Directory of Open Access Journals (Sweden)

    Abdullah Aydın

    2012-09-01

    Full Text Available In the title salt, C12H18NO+·Cl−, N—H...Cl interactions between the free chloride anions and the organic cations connect the molecules into hydrogen-bond dimers, forming a R22(8 motif. The dimers are linked by C—H...O hydrogen bonds into chains extending along [301]. The carbonyl group is co-planar with the phenyl ring [C—C—C=O torsion angle = −3.3 (7°]. The side chain has an E conformation.

  5. Effect of Calcium Chloride and Cooling on Post-Harvest Brussels Cabbage (Brassica Oleracea L.

    Directory of Open Access Journals (Sweden)

    Alfonso Rincón Pérez

    2014-11-01

    Full Text Available In recent years, the demand of crucifers has increased and particularly of Brussels sprouts (Brassica genus, species Brassica oleracea L.; mainly due to their functional properties; however, this vegetable is perishable and with inadequate techniques in postharvest handling, considerable losses are generated. The objective of this research was to determine the effect of calcium chloride and cooling on postharvest behavior of Brussels sprouts. A completely randomized design was performed, treatments corresponded to three storage temperatures (4°C, 8°C and temperature (18°C and three concentrations of calcium chloride (0%, 2% and 4% were used. Sprouts were harvested at commercial maturity on a farm irrigation district in Usochicamocha, Boyacá Department; of uniform size, excellent plant health and free from mechanical damage conditions. For 19 days of storage, weight loss, respiratory rate and total chlorophyll were measured. Sprouts stored at room temperature lasted 11days postharvest, while cooled lasted for 19 days. A significant effect in reducing weight loss between those sprouts which were stored at 4°C and 8°C and treated with calcium chloride solution at 4% was observed. For the respiratory rate was observed a significant reduction insprouts stored at 4°C. Therefore the most favorable temperature for the storage of Brussels sprouts is 4°C and calcium chloride solution 4%,useful information for producers and marketers.

  6. High levan production by Bacillus licheniformis NS032 using ammonium chloride as the sole nitrogen source.

    Science.gov (United States)

    Kekez, B D; Gojgic-Cvijovic, G D; Jakovljevic, D M; Stefanovic Kojic, J R; Markovic, M D; Beskoski, V P; Vrvic, M M

    2015-03-01

    In this study, levan production by Bacillus licheniformis NS032 isolated from a petroleum sludge sample was investigated. High levan yield was obtained in a wide range of sucrose concentrations (up to 400 g/L) and, contrary to most levan-producing strains, using ammonium chloride as the sole N source. Interaction between sucrose, ammonium chloride, and initial pH of the medium in a low sucrose (60-200 g/L) and a high sucrose (300-400 g/L) system was analyzed by response surface methodology. According to the calculated model in the low sucrose system, maximum predicted levan yield was 47.8 g/L (sucrose 196.8 g/L, ammonium chloride 2.4 g/L, pH 7.0), while in the high sucrose system, levan yield was 99.2 g/L (sucrose 397.6 g/L, ammonium chloride 4.6 g/L, pH 7.4). In addition, protective effect of microbial levan against copper toxicity to Daphnia magna is observed for the first time. The acute toxicity (48 h EC50) of copper decreased from 0.14 to 0.44 mg/L by levan in concentration of 50 ppm. PMID:25592434

  7. Preparation and characteristic research of anhydrous magnesium chloride with dehydrated ammonium carnallite

    Institute of Scientific and Technical Information of China (English)

    ZHOU Ning-bo; CHEN Bai-zhen; HE Xin-kuai; LI Yi-bing

    2006-01-01

    Taking the saline lake bischofite and NH4Cl that was removed with the ammonia method and continuwas synthesized. And then the ammonium carnallite was dehydrated to some extent at 160℃ for 4 h. Ammonium carnallite reacted with ammonia at 240℃ for 150 min and the ammonation ammonium carnallite was produced. Finally, the ammonation ammonium carnallite was calcined at 750℃ into anhydrous magnesium chloride containing only 0.1% (mass fraction) of MgO. On the other hand, dehydrated ammonium carnallite was mixed with the solid ammonium chloride at mass ratio 1:4 at high temperature and with the differential pressure of HN3 above 30.5 kPa. The dehydrated ammonium carnallite of mixture was dehydrated at 410℃, and then calcined at 700℃ into anhydrous magnesium chloride with only 0. 087% (mass fraction) of MgO. X-ray diffraction and electron microscopy analysis results prove that anhydrous magnesium chloride obtained by both methods hasn't mixed phases, the particle is large and even has good dispersion, which is suitable for preparation of metal magnesium in the electrolysis.

  8. Venous cannulation and topical ethyl chloride in patients receiving nitrous oxide.

    Science.gov (United States)

    Crecelius, C.; Rouhfar, L.; Beirne, O. R.

    1999-01-01

    The purpose of this study was to evaluate the effect of ethyl chloride spray on the anxiety and pain associated with placing an intravenous catheter in patients sedated with nitrous oxide. Eighty-eight patients scheduled for dental surgery with a combination of intravenous and nitrous oxide sedation were randomly assigned to have ethyl chloride spray or a placebo, water spray, applied before cannulation of a vein. Anxiety and pain were reported using a 10.0-cm visual analog scale before nitrous oxide administration, after nitrous oxide sedation, following application of the spray, and following venous cannulation. The first 2 assessments measured overall levels of patient anxiety and pain and confirmed that nitrous oxide sedation reduced anxiety without changing already low levels of pain. The second 2 assessments of anxiety and pain measured the reaction toward the spray and cannulation. The application of ethyl chloride spray produced significantly more anxiety and pain than did the placebo. The results of this study demonstrate that ethyl chloride spray does not significantly reduce the anxiety and pain associated with venous cannulation in patients sedated with nitrous oxide. PMID:11692346

  9. Treatment of Highly Turbid Water by Polyaluminum Ferric Chloride (PAFCL

    Directory of Open Access Journals (Sweden)

    Fazel Fazel Mohammadi-Moghaddam

    2015-10-01

    Full Text Available Background & Aims of the Study: In some situation like rainfall seasons raw water become very turbid so it affected the water treatment plant processes and quality of produced water. Treatment of very high turbid water has some concerns like precursors for disinfection by-products and very loading rate of particle on filter's media and consequently increases in water consumption for filter backwash. This paper investigates the performance of a composite inorganic polymer of aluminium and ferric salt, Polyaluminium ferric chloride (PAFCl, for the removal of turbidity, color and natural organic matter (NOM from high turbid water. Materials and Methods: Experiments were carried out by Jar test experiment by synthetic water samples with 250 and 500 NTU turbidity that prepared in laboratory. Results: The results of conventional jar test showed that the optimum pH for coagulation of water sample was 7.5 to 8 and optimum dosage of the coagulant was 10 mg/L. Removal efficiency of turbidity, color and UV adsorbent at 254 nm at optimum dose and pH without filtration was 99.92%, 100% and 80.6% respectively for first sample (250 NTU and 99.95%, 99.49% and 84.77 for second sample (500 NTU respectively. Conclusion: It concluded that polyaluminium ferric chloride has a very good efficiency for the removal of turbidity, color and organic matter in high turbid water. Also it can be select as a coagulant for high turbid water and some waste water from water treatment plant like filter backwash water.

  10. Interactions between chloride ingress and carbonation in cementitious materials

    OpenAIRE

    SAILLIO, Mickael; BARBERON, Fabien; BAROGHEL BOUNY, Véronique; GEGOUT, Philippe; PLATRET, Gérard; D'ESPINOSE DE LA CAILLERIE, JB

    2011-01-01

    Carbonation and chloride attacks are the major causes of reinforced concrete (RC) structure deterioration by initiation of steel rebar corrosion. These attacks are usually studied separately in the literature. Chloride-induced corrosion takes place mainly in marine environment or in the case of contact with deicing salts, while carbonation is systematically present in all RC structures at a variable degree. Since carbonation leads to significant microstructure changes, the effect of chloride ...

  11. Surface Chloride Concentration of Concrete under Shallow Immersion Conditions

    OpenAIRE

    Jun Liu; Kaifeng Tang; Dong Pan; Zongru Lei; Weilun Wang; Feng Xing

    2014-01-01

    Deposition of chloride ions in the surface layer of concrete is investigated in this study. In real concrete structure, chloride ions from the service environment can penetrate into concrete and deposit in the surface layer, to form the boundary condition for further diffusion towards the interior. The deposit amount of chloride ions in the surface layer is normally a function of time, rather than a constant. In the experimental investigation, concrete specimens with different mix proportions...

  12. N,N-Dimethyldehydroabietylammonium chloride ethanol monosolvate

    Directory of Open Access Journals (Sweden)

    Xiu-Zhi Huang

    2013-06-01

    Full Text Available The title compound {systematic name: 1-[(1R,4aS,10aR-7-isopropyl-1,4a-dimethyl-1,2,3,4,4a,9,10,10a-octahydrophenanthren-1-yl]-N,N-dimethylmethanaminium chloride ethanol monosolvate}, C22H36N+·Cl−·C2H6O, was synthesized from dehydroabietylamine by N-methylation with formaldehyde/formic acid and transformation into the hydrochloride. The dehydroabietyl moiety exhibits the usual conformation with the two cyclohexane rings in chair and half-chair conformations and a trans-ring junction. The crystal structure is built up from columns of the dehydroabietyl moieties stacked along the a axis. These columns are held together by the chloride ions via N—H...Cl and C—H...Cl interactions, which establish a two-dimensional network parallel to (010. The ethanol solvent molecules are located between the columns and anchored via O—H...Cl hydrogen bonds.

  13. Open cycle lithium chloride cooling system

    Science.gov (United States)

    Lenz, T. G.; Loef, G. O. G.; Iyer, R.; Wenger, J.

    1983-05-01

    A lithium chloride open cycle absorption chiller has been designed, built and tested. Solution reconcentration takes place in a small counter current packed column supplied with solar heated air. Removal of noncondensable gases that enter the chiller dissolved in the strong solution and the make-up refrigerant streams is accomplished by a liquid-jet ejector and a small vacuum pump. Cooling capacities approaching 1.4 tons and COP levels of 0.58 have been achieved at non-optimum operating conditions. Test results from preliminary system operation suggest that mass transfer processes in both the packed column reconcentrator and the absorber are controlled by concentration gradients in the lithium chloride solution. Liquid phase controlled mass transfer dictates an operating strategy different from the previously assumed gas phase controlled process to obtain maximum rates of evaporation in the packed column. Determination of optimal operating conditions leading to decreased electrical power consumption and improved cooling capacity and coefficient of performance will require further analysis and testing.

  14. Synthesis and structure characterization of diethyldiallylammonium chloride

    Institute of Scientific and Technical Information of China (English)

    刘立华; 龚竹青; 郑雅杰

    2003-01-01

    The unsaturated quaternary ammonium salt diethyldiallylammonium chloride(DEDAAC) was synthesized in a two-step synthetic method. The influences of the adding method of raw materials and temperature on the yields of diethylallylamine (DEAA), and drying and temperature on the synthesis of DEDAAC were investigated. The content of in-process product DEAA was determined by non-aqueous titration. The structure of product DEDAAC was identified with IR, 1 H NMR and elemental analysis. The results show that adding allyl chloride and sodium hydroxide alternately can increase the yield of DEAA and decrease by-products. In further synthesizing of DEDAAC from DEAA, the step of drying DEAA is very necessary. When DEAA is dried by solid sodium hydroxide, good columnar crystals with a high purity(mp 199.5-201.0 ℃) are obtained; when DEAA is undried or the content of water in DEAA is above 20%, only platelets with bad quality are obtained even without crystals. The suitable synthesis conditions for DEAA and DEDAAC are 35 ℃, 6 h and 40 ℃, 36 h, respectively, and their yields are 69.7% and 67.3%, respectively.

  15. Fault locator of an allyl chloride plant

    Directory of Open Access Journals (Sweden)

    Savković-Stevanović Jelenka B.

    2004-01-01

    Full Text Available Process safety analysis, which includes qualitative fault event identification, the relative frequency and event probability functions, as well as consequence analysis, was performed on an allye chloride plant. An event tree for fault diagnosis and cognitive reliability analysis, as well as a troubleshooting system, were developed. Fuzzy inductive reasoning illustrated the advantages compared to crisp inductive reasoning. A qualitative model forecast the future behavior of the system in the case of accident detection and then compared it with the actual measured data. A cognitive model including qualitative and quantitative information by fuzzy logic of the incident scenario was derived as a fault locator for an ally! chloride plant. The obtained results showed the successful application of cognitive dispersion modeling to process safety analysis. A fuzzy inductive reasoner illustrated good performance to discriminate between different types of malfunctions. This fault locator allowed risk analysis and the construction of a fault tolerant system. This study is the first report in the literature showing the cognitive reliability analysis method.

  16. Interpretation of postmortem vitreous concentrations of sodium and chloride.

    Science.gov (United States)

    Zilg, B; Alkass, K; Berg, S; Druid, H

    2016-06-01

    Vitreous fluid can be used to analyze sodium and chloride levels in deceased persons, but it remains unclear to what extent such results can be used to diagnose antemortem sodium or chloride imbalances. In this study we present vitreous sodium and chloride levels from more than 3000 cases. We show that vitreous sodium and chloride levels both decrease with approximately 2.2mmol/L per day after death. Since potassium is a well-established marker for postmortem interval (PMI) and easily can be analyzed along with sodium and chloride, we have correlated sodium and chloride levels with the potassium levels and present postmortem reference ranges relative the potassium levels. We found that virtually all cases outside the reference range show signs of antemortem hypo- or hypernatremia. Vitreous sodium or chloride levels can be the only means to diagnose cases of water or salt intoxication, beer potomania or dehydration. We further show that postmortem vitreous sodium and chloride strongly correlate and in practice can be used interchangeably if analysis of one of the ions fails. It has been suggested that vitreous sodium and chloride levels can be used to diagnose drowning or to distinguish saltwater from freshwater drowning. Our results show that in cases of freshwater drowning, vitreous sodium levels are decreased, but that this mainly is an effect of postmortem diffusion between the eye and surrounding water rather than due to the drowning process, since the decrease in sodium levels correlates with immersion time. PMID:27105154

  17. On Barium Oxide Solubility in Barium-Containing Chloride Melts

    Science.gov (United States)

    Nikolaeva, Elena V.; Zakiryanova, Irina D.; Bovet, Andrey L.; Korzun, Iraida V.

    2016-08-01

    Oxide solubility in chloride melts depends on temperature and composition of molten solvent. The solubility of barium oxide in the solvents with barium chloride content is essentially higher than that in molten alkali chlorides. Spectral data demonstrate the existence of oxychloride ionic groupings in such melts. This work presents the results of the BaO solubility in two molten BaCl2-NaCl systems with different barium chloride content. The received data together with earlier published results revealed the main regularities of BaO solubility in molten BaO-BaCl2-MCl systems.

  18. Catalytic Conversion of Cellulose to Levulinic Acid by Metal Chlorides

    Directory of Open Access Journals (Sweden)

    Beixiao Zhang

    2010-08-01

    Full Text Available The catalytic performance of various metal chlorides in the conversion of cellulose to levulinic acid in liquid water at high temperatures was investigated. The effects of reaction parameters on the yield of levulinic acid were also explored. The results showed that alkali and alkaline earth metal chlorides were not effective in conversion of cellulose, while transition metal chlorides, especially CrCl3, FeCl3 and CuCl2 and a group IIIA metal chloride (AlCl3, exhibited high catalytic activity. The catalytic performance was correlated with the acidity of the reaction system due to the addition of the metal chlorides, but more dependent on the type of metal chloride. Among those metal chlorides, chromium chloride was found to be exceptionally effective for the conversion of cellulose to levulinic acid, affording an optimum yield of 67 mol % after a reaction time of 180 min, at 200 °C, with a catalyst dosage of 0.02 M and substrate concentration of 50 wt %. Chromium metal, most of which was present in its oxide form in the solid sample and only a small part in solution as Cr3+ ion, can be easily separated from the resulting product mixture and recycled. Finally, a plausible reaction scheme for the chromium chloride catalyzed conversion of cellulose in water was proposed.

  19. Durability of cracked fibre reinforced concrete structures exposed to chlorides

    DEFF Research Database (Denmark)

    Hansen, Ernst Jan De Place; Ekman, Tom; Hansen, Kurt Kielsgaard

    1999-01-01

    is used as environmental load. The chloride penetration is characterized both qualitatively (UV-test) and quantitatively (chloride profile) and by microscopy. The test programme involves three different concrete qualities. Both steel fibres and polypropylene fibres are used in the concrete beams as well......Durability studies are carried out by subjecting FRC-beams to combined mechanical and environmental load. Mechanical load is obtained by exposing beams to 4-point bending until a predefined crack width is reached, using a newly developed test setup. Exposure to a concentrated chloride solution...... as main reinforcement. The effect of the cracks, the fibres and the concrete quality on the chloride penetration is studied....

  20. Application of cetylpyridinium chloride in dispersion of antibacterial ceramic glaze

    Institute of Scientific and Technical Information of China (English)

    CHAI Li-yuan; CHENG Ming-ming; PENG Bing; HUANG Yi; ZHANG Xiao-fei

    2006-01-01

    The adsorption of cetylpyridinium chloride(CPC) onto a ceramic glaze mixture composed of limestone, feldspar, quartz,kaolin, and antibacterial agent was studied. Both adsorption isothermals and the average particle zeta potential were investigated in order to understand the suspension stability as a function of pH, ionic strength, and surfactant concentration. The results show that under the optimal conditions such as pH value of 7 or 9, 0.01 mol/L of ionic strength and around critical micelle concentration(CMC)of surfactant, antibacterial ceramic glaze acquires fine dispersion stability. The adsorption of CPC on ceramic glaze particles is in accordance with Langmuir model in 0.01mol/L at pH=7 and pH=9. The adsorption of small amounts of cationic CPC onto the primarily negatively charged surfaces of the particles in the pH range of 7-9 produces strong attraction and flocculation due to hydrophobic interactions. High concentration of surfactant under 0.01 mol/L of salt provides high zeta potential, which produces a high stability.

  1. Oxidation of Borneol to Camphor Using Oxone and Catalytic Sodium Chloride: A Green Experiment for the Undergraduate Organic Chemistry Laboratory

    Science.gov (United States)

    Lang, Patrick T.; Harned, Andrew M.; Wissinger, Jane E.

    2011-01-01

    A new green oxidation procedure was developed for the undergraduate organic teaching laboratories using Oxone and a catalytic quantity of sodium chloride for the conversion of borneol to camphor. This simple 1 h, room temperature reaction afforded high quality and yield of product, was environmentally friendly, and produced negligible quantities…

  2. Effects of Chloride Ion on the Texture of Copper and Cu-ZrB2 Coatings Electrodeposited from Copper Nitrate Solution in Different Plating Modes

    Institute of Scientific and Technical Information of China (English)

    Dongming GUO; Min ZHANG; Zhuji JIN; Renke KANG

    2006-01-01

    For the first time, the texture of copper and Cu-ZrB2 coatings produced from copper nitrate solution was studied. Chloride ion shows different effects on the deposit texture under direct current(DC)and pulse ion concentration exceeds 20 mg/I. The addition of ZrB2 particles enhances the cathodic polarization of copper deposition, which improves the growth of(111)plane. However, this improvement can be eliminated by further addition of chloride ion.

  3. An MCM modeling study of nitryl chloride (ClNO2) impacts on oxidation, ozone production and nitrogen oxide partitioning in polluted continental outflow

    OpenAIRE

    T. P. Riedel; G. M. Wolfe; Danas, K. T.; J. B. Gilman; W. C. Kuster; Bon, D. M; Vlasenko, A.; Li, S.-M.; E. J. Williams; B. M. Lerner; P. R. Veres; Roberts, J.M.; J. S. Holloway; Lefer, B; S. S. Brown

    2014-01-01

    Nitryl chloride (ClNO2) is produced at night by reactions of dinitrogen pentoxide (N2O5) on chloride containing surfaces. ClNO2 is photolyzed during the morning hours after sunrise to liberate highly reactive chlorine atoms (Cl·). This chemistry takes place primarily in polluted environments where the concentrations of N2O5 precursors (nitrogen oxide radicals and ozone) are high, though it likely occurs in remote regions at lower intensities. Recent field measurements hav...

  4. THE COMPATIBILITY OF BLENDS OF POLY(VINYL CHLORIDE) OR CHLORINATED POLY(VINYL CHLORIDE) WITH POLY(METHYL METHACRYLATE)

    Institute of Scientific and Technical Information of China (English)

    WANG Qingguo; CHENG Rongshi

    1988-01-01

    IR spectral shifts of carbonyl vibrational absorption for ethyl acetate, which acts analogically as the structural unit of poly(methyl methacrylate), in cyclohexane, chloroform, chlorinated paraffins, poly(vinyl chloride) and chlorinated poly(vinyl chloride) were measured. The results suggest that there are specific interactions between the carbonyl groups and the chlorinated hydrocarbons which could be responsible for the apparent compatibility of poly(vinyl chloride) -poly(methyl methacrylate) and chlorinated poly(vinyl chloride) -poly(methyl methacrylate) blends. Additionally, the effects of the preparation mode of blend films on phase separation and observed compatibility are discussed.

  5. Cadmium Chloride Induces DNA Damage and Apoptosis of Human Liver Carcinoma Cells via Oxidative Stress

    Directory of Open Access Journals (Sweden)

    Anthony Skipper

    2016-01-01

    Full Text Available Cadmium is a heavy metal that has been shown to cause its toxicity in humans and animals. Many documented studies have shown that cadmium produces various genotoxic effects such as DNA damage and chromosomal aberrations. Ailments such as bone disease, renal damage, and several forms of cancer are attributed to overexposure to cadmium.  Although there have been numerous studies examining the effects of cadmium in animal models and a few case studies involving communities where cadmium contamination has occurred, its molecular mechanisms of action are not fully elucidated. In this research, we hypothesized that oxidative stress plays a key role in cadmium chloride-induced toxicity, DNA damage, and apoptosis of human liver carcinoma (HepG2 cells. To test our hypothesis, cell viability was determined by MTT assay. Lipid hydroperoxide content stress was estimated by lipid peroxidation assay. Genotoxic damage was tested by the means of alkaline single cell gel electrophoresis (Comet assay. Cell apoptosis was measured by flow cytometry assessment (Annexin-V/PI assay. The result of MTT assay indicated that cadmium chloride induces toxicity to HepG2 cells in a concentration-dependent manner, showing a 48 hr-LD50 of 3.6 µg/mL. Data generated from lipid peroxidation assay resulted in a significant (p < 0.05 increase of hydroperoxide production, specifically at the highest concentration tested. Data obtained from the Comet assay indicated that cadmium chloride causes DNA damage in HepG2 cells in a concentration-dependent manner. A strong concentration-response relationship (p < 0.05 was recorded between annexin V positive cells and cadmium chloride exposure. In summary, these in vitro studies provide clear evidence that cadmium chloride induces oxidative stress, DNA damage, and programmed cell death in human liver carcinoma (HepG2 cells.

  6. The removal of radioactive radium (Ra226) from chloride liquors by columnar ion exchange in the presence of calcium, magnesium and iron cations

    International Nuclear Information System (INIS)

    The purpose of this work was to study the feasibility of controlling the discharge of soluble Ra226, in the presence of Ca, Mg and Fe cations in synthetic chloride effluents, by adsorption on cation exchange resins to decrease Ra226-concentrations to federal environmental levels of 10 pCi Ra226/litre. Environmentally acceptable effluents were produced from synthetic chloride feed liquors containing 10 ppm Ca, 5 ppm Mg, 120 ppm Fe plus 20,000 pCi Ra226/litre. Environmentally acceptable effluents were not produced, by cation exchange, from a synthetic chloride liquor containing 490 ppm Ca, 97 ppm Mg, 720 ppm Fe in addition to 20,000 pCi Ra226/litre. The mass interference of the Ca + Mg + Fe cation concentrations in the feed liquor was in over-powering competition, for resin sites, with the Ra226-cations. To obtain realistic data, the adsorption process should be reexamined using a chloride liquor produced under optimal chloride leaching conditions of an Elliot Lake uranium ore. This would, in all probability, reveal other cations unavailable in the synthetic chloride liquors

  7. [Survey of plasticizers in polyvinyl chloride toys].

    Science.gov (United States)

    Abe, Yutaka; Yamaguchi, Miku; Mutsuga, Motoh; Hirahara, Yoshichika; Kawamura, Yoko

    2012-01-01

    Plasticizers in 101 samples of polyvinyl chloride (PVC) toys on the Japanese market were surveyed. No phthalates were detected in designated toys, though bis(2-ethylhexyl)phthalate, diisononyl phthalate, diisobutyl phthalate, dibutyl phthalate, diisodecyl phthalate and benzyl butyl phthalate were detected in more than half of other toys. 2,2,4-Tributyl-1,3-pentanediol diisobutylate, o-acetyl tributyl citrate, adipates and diacetyl lauroyl glycerol, which are alternative plasticizers to phthalates, were detected. The results of structural analysis confirmed the presence of di(2-ethylhexyl)terephthalate, tributyl citrate, diisononyl 1,2-cyclohexanedicarboxylate and neopentyl glycol esters; these have not previonsly been reported in Japan. There appears to be a shift in plasticizers used for designated toys from phthalates to new plasticizers, and the number of different plasticizers is increasing.

  8. Estimating the chloride transport in cement paste

    Directory of Open Access Journals (Sweden)

    Princigallo, A.

    2012-06-01

    Full Text Available A method was developed to measure the diffusion coefficient of chloride ions in cement paste based on an analytical solution to Fick’s 2nd law in a cylindrical coordinate system. This natural method yielded diffusivity results within as little as a month. Testing time was reduced by exploiting the three-dimensional inward flux in the specimen. In an attempt to determine the saturation concentration, dense portland cement pastes were exposed to a concentrated chloride solution. The method proved to be useful for exploring cement hydration-induced changes in the diffusion coefficient of cement paste.

    Se ha desarrollado un método para medir el coeficiente de difusión de los iones cloruro en la pasta de cemento, partiendo de una aplicación analítica de la segunda ley de Fick en un sistema de coordinadas cilíndrico. Este método, que es natural, demostró ser capaz de producir resultados de difusividad en tan solo un mes. Se consiguió reducir el tiempo de ensayo mediante el aprovechamiento de la tridimensionalidad del flujo desde el exterior al interior de la probeta. A fin de determinar la concentración de saturación, se sometieron las pastas de cemento Portland a una disolución de cloruros concentrada. Este método resultó ser útil en el estudio de los cambios del coeficiente de difusión de la pasta de cemento provocados por las reacciones de hidratación que tienen lugar en esta.

  9. Experimental and numerical investigation of chloride ingress in cracked concrete

    NARCIS (Netherlands)

    Šavija, B.

    2014-01-01

    Chloride induced corrosion of reinforcing steel is recognized as the most common deterioration mechanism affecting reinforced concrete structures. As such, it has been in focus of research for more than thirty years. Numerous studies of chloride ingress, corrosion initiation, and corrosion propagati

  10. Hydrophobic treatment of concrete as protection against chloride penetration

    NARCIS (Netherlands)

    Vries, J. de; Polder, R.B.; Borsje, H.

    1996-01-01

    Hydrophobic treatment makes a concrete surface absorb less water and less chloride. Hydrophobic treatment was studied as a protection agninst chloride penetration from deicing salts. Test methods were designed. Nine hydrophobic products were tested, of which three complied to the requirements on fin

  11. Local impermeant anions establish the neuronal chloride concentration

    DEFF Research Database (Denmark)

    Glykys, J; Dzhala, V; Egawa, K;

    2014-01-01

    Neuronal intracellular chloride concentration [Cl(-)](i) is an important determinant of γ-aminobutyric acid type A (GABA(A)) receptor (GABA(A)R)-mediated inhibition and cytoplasmic volume regulation. Equilibrative cation-chloride cotransporters (CCCs) move Cl(-) across the membrane, but accumulat...

  12. Chlorides behavior in raw fly ash washing experiments

    International Nuclear Information System (INIS)

    Chloride in fly ash from municipal solid waste incinerators (MSWIs) is one of the obstructive substances in recycling fly ash as building materials. As a result, we have to understand the behavior of chlorides in recycling process, such as washing. In this study, we used X-ray absorption near edge structure (XANES) and X-ray diffraction (XRD) to study the chloride behavior in washed residue of raw fly ash (RFA). We found that a combination of XRD and XANES, which is to use XRD to identify the situation of some compounds first and then process XANES data, was an effective way to explain the chlorides behavior in washing process. Approximately 15% of the chlorine in RFA was in the form of NaCl, 10% was in the form of KCl, 51% was CaCl2, and the remainder was in the form of Friedel's salt. In washing experiments not only the mole percentage but also the amount of soluble chlorides including NaCl, KCl and CaCl2 decreases quickly with the increase of liquid to solid (L/S) ratio or washing frequency. However, those of insoluble chlorides decrease slower. Moreover, Friedel's salt and its related compound (11CaO.7Al2O3.CaCl2) were reliable standards for the insoluble chlorides in RFA, which are strongly related to CaCl2. Washing of RFA promoted the release of insoluble chlorides, most of which were in the form of CaCl2.

  13. Phosphatase inhibitors activate normal and defective CFTR chloride channels.

    OpenAIRE

    Becq, F; Jensen, T J; Chang, X B; Savoia, A.; Rommens, J M; Tsui, L C; Buchwald, M; Riordan, J R; Hanrahan, J W

    1994-01-01

    The cystic fibrosis transmembrane conductance regulator (CFTR) chloride channel is regulated by phosphorylation and dephosphorylation at multiple sites. Although activation by protein kinases has been studied in some detail, the dephosphorylation step has received little attention. This report examines the mechanisms responsible for the dephosphorylation and spontaneous deactivation ("rundown") of CFTR chloride channels excised from transfected Chinese hamster ovary (CHO) and human airway epi...

  14. Monte Carlo calculation of chloride diffusion in concrete

    International Nuclear Information System (INIS)

    Coefficient of chloride diffusion is calculated by applying the Fick's second law of diffusion to a chloride concentration profile. Then from the signal strength for various chlorine gamma-ray energies was then calculated at the detector of the portable D-D neutron generator based PGNAA setup. (author)

  15. 21 CFR 172.165 - Quaternary ammonium chloride combination.

    Science.gov (United States)

    2010-04-01

    ... HUMAN CONSUMPTION Food Preservatives § 172.165 Quaternary ammonium chloride combination. The food... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Quaternary ammonium chloride combination. 172.165 Section 172.165 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN...

  16. Contribution on creep polygonization study in crystals. Creep of single crystalline silver chloride and sodium chloride

    International Nuclear Information System (INIS)

    Subgrain formation and their influence on plastic behavior of materials has been studied in the case of single crystals of silver chloride and sodium chloride crept at high temperature (T > 0.5 Tmelting). It is shown that the creep rate ε is a function of the mean subgrain diameter d. For secondary creep ε ∝ dk with k = 2 for NaCl and AgCl. During secondary creep, the substructure changes continuously: sub-boundaries migrate and sub-grains rotate. We find that sub-boundaries migration accounts for 35 pc of the total strain and that subgrain misorientation θ increases linearly with strain ε: θ ∝ 0.14 ε. The stability of permanent creep seems related to the power that the substructure is able to dissipate. The possible subgrain formation mechanisms are examined. It is shown that subgrain formation is closely related to the geometrical conditions of deformation and to the heterogeneities of this later. (author)

  17. Behavior and products of mechano-chemical dechlorination of polyvinyl chloride and poly (vinylidene chloride).

    Science.gov (United States)

    Xiao, Xiao; Zeng, Zigao; Xiao, Songwen

    2008-02-28

    The mechano-chemical (MC) dechlorination of polyvinyl chloride (PVC) and polyvinylidene chloride (PVDC) was performed by mechanical milling PVC/PVDC powder with zinc powder in a planetary ball mill, and the products of dechlorination were characterized by Infrared spectra (IR), X-ray diffraction (XRD), Raman spectroscopy, gas chromatography-mass spectrometry (GC-MS), and 13C solid-state nuclear magnetic resonance (NMR). The experimental results show that PVC/PVDC can be easily dechlorinated by milling with zinc powder, and formed various kinds of inorganic and organic products. Inorganic compounds included Zn2OCl(2).2H2O, Zn5(OH)8Cl2.H2O etc., and organic products involved diamond-like carbon, carbyne fragment, polyacetylene etc. Organic products formed following the paths of dechlorination, dehydrochlorination, crosslink, and oxidation. The mechano-chemical dechlorination process of PVC/PVDC may be an effective approach for carbyne synthesizing in the appropriate condition.

  18. Mechanistic understanding and kinetic studies of highly selective oxidative dehydrogenation of ethane over novel supported molten chloride catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Gaertner, C.; Veen, A.C. van; Lercher, J.A. [Technische Univ. Muenchen, Garching (Germany). Dept. of Chemistry

    2012-07-01

    Ethene is one of the most important feedstocks for chemical industry, nowadays mainly produced via steam cracking. However, oxidative dehydrogenation becomes a more important process route, allowing to produce ethene selectively and at lower temperatures. Supported alkali chloride catalysts are promising materials. However, the ODH mechanism of this class of catalysts is not well investigated so far. The investigation of the reaction mechanism is thus the aim of this contribution. (orig.)

  19. PHASE EQUILIBRIUM FOR THE TERNARY SYSTEM VINYL CHLORIDE-CHLORINATED POLYETHYLENE-POLY (VINYL CHLORIDE)

    Institute of Scientific and Technical Information of China (English)

    LOU Jianfeng; WENG Zhixue; HUANG Zhiming; PAN Zuren

    1991-01-01

    Swelling capacity of vinyl chloride (VC) in chlorinated polyethylene (CPE) with 25- 40 wt% Cl at temperature 30- 57 ℃ was studied and their relationships were correlated with Langmuir and Freundlich adsorption equations. A ternary phase diagram for VC-CPE-PVC was also established.In-situ polymerization conditions of CPE-g -VC were proposed and CPE content control was analyzed for the manufacturing process of CPE-g-VC graft product based on results of phase equilibrium study.

  20. Highly selective oxidative dehydrogenation of ethane with supported molten chloride catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Gaertner, C.A.; Veen, A.C. van; Lercher, J.A. [Technische Univ. Muenchen (Germany). Catalysis Research Center

    2011-07-01

    Ethene production is one of the most important transformations in chemical industry, given that C{sub 2}H{sub 4} serves as building block for many mass-market products. Besides conventional thermal processes like steam cracking of ethane, ethane can be produced selectively by catalytic processes. One of the classes of catalysts that have been reported in literature as active and highly selective for the oxidative dehydrogenation of ethane is that of supported molten chloride catalysts, containing an alkali chloride overlayer on a solid support. This work deals with fundamental aspects of the catalytic action in latter class of catalysts. Results from kinetic reaction studies are related to observations in detailed characterization and lead to a comprehensive mechanistic understanding. Of fundamental importance towards mechanistic insights is the oxygen storage capacity of the catalysts that has been determined by transient step experiments. (orig.)

  1. Metal Chlorides in Ionic Liquid Solvents Convert Sugars to 5-Hydroxymethylfurfural

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Haibo; Holladay, John E.; Brown, Heather M.; Zhang, Z. Conrad

    2007-06-15

    Sugars were converted to hydroxymethylfurfural (HMF) at high yield in ionic liquids without the addition of Bronsted acids. Very small amount of certain metal halides significantly reduced the fructose dehydration barrier in ionic liquids producing HMF at high yields. Most remarkably, glucose, a common sugar molecule, was selectively converted to HMF in good yield in ionic liquids containing a small amount of CrCl2. Thus CrCl2 is unique among metal chlorides tested for its effectiveness in both isomerizing glucose as well as dehydrating fructose. Only negligble amount of levulinic acid was formed in the reactions. The catalytic activity of metal chlorides for sugar conversion in ionic liquids is perhaps related to hydroxyl group of the sugar forming metal complexes with the unsaturated metal center.

  2. Immobilization of fission products arising from pyrometallurgical reprocessing in chloride media

    Science.gov (United States)

    Leturcq, G.; Grandjean, A.; Rigaud, D.; Perouty, P.; Charlot, M.

    2005-12-01

    Spent nuclear fuel reprocessing to recover energy-producing elements such as uranium or plutonium can be performed by a pyrochemical process. In such method, the actinides and fission products are extracted by electrodeposition in a molten chloride medium. These processes generate chlorinated alkali salt flows contaminated by fission products, mainly Cs, Ba, Sr and rare earth elements constituting high-level waste. Two possible alternatives are investigated for managing this wasteform; a protocol is described for dechlorinating the fission products to allow vitrification, and mineral phases capable of immobilizing chlorides are listed to allow specification of a dedicated ceramic matrix suitable for containment of these chlorinated waste streams. The results of tests to synthesize chlorosilicate phases are also discussed.

  3. Controlling the structure and rheology of TEMPO-oxidized cellulose in zinc chloride aqueous suspensions for fabricating advanced nanopaper

    Science.gov (United States)

    Wang, Sha; Zhang, Xin; Hu, Liangbing; Briber, Robert; Wang, Howard; Zhong, Linxin

    Due to its abundance, low-cost, biocompatibility and renewability, cellulose has become an attractive candidate as a functional material for various advanced applications. A key to novel applications is the control of the structure and rheology of suspensions of fibrous cellulose. Among many different approaches of preparing cellulose suspensions, zinc chloride addition to aqueous suspensions is regarded an effective practice. In this study, effects of ZnCl2 concentration on TEMPO-oxidized cellulose (TOC) nanofiber suspensions have been investigated. Highly-transparent cellulose nanofiber suspension can be rapidly obtained by dissolving TOC in 65 wt.% zinc chloride aqueous solutions at room temperature, whereas a transparent zinc ion cross-linked TOC gel could be obtained with zinc chloride concentration as low as 10 wt. %. The structural and rheological characteristics of TOC/ZnCl2 suspensions have been measured to correlate to the performance of thetransparent and flexible nanocellulose paper subsequently produced via vacuum filtration or wet-casting processes.

  4. A flow cytometric method for measurement of intracellular chloride concentration in lymphocytes using the halide-specific probe 6-methoxy-N-(3-sulfopropyl) quinolinium (SPQ).

    Science.gov (United States)

    Pilas, B; Durack, G

    1997-08-01

    A flow cytometry method using the halide-specific fluorescent dye, 6-methoxy-N-(3-sulfopropyl) quinolinium (SPQ), has been developed to measure intracellular chloride concentration in single cells. Collisions with chloride quench the fluorescence of SPQ, making it possible to relate the measured fluorescence intensity to chloride concentration with a Stern-Volmer equation. To demonstrate the method, porcine lymphocytes were loaded in vitro, using a hypotonic method, with 5 mM SPQ. Fluorescence excitation was provided by a UV laser and the fluorescence emission intensity at 485 nm was recorded. Calibration was performed by using 7 microM nigericin (a K/H antiporter) and 10 microM tributyltin (a Cl/OH antiporter) to equilibrate the concentrations of intracellular and extracellular chloride. Calibration measurements were made for chloride concentrations between 0 mM and 140 mM. The calibration produced a Stern-Volmer quenching constant of 16.2 M(-1) which was used to relate measured cell fluorescence to intracellular chloride concentration. The intracellular chloride concentration for fresh porcine lymphocytes was determined to be 56.2 +/- 3.3 mM. Stable loading of cells with 5 mM SPQ was accomplished in 15 minutes, leakage of SPQ from the cells was minimal, and over 95% of the cells remained viable after loading. PMID:9266752

  5. Comparative effects of hydrogen chloride gas on tomato and chrysanthemum. I. Distribution and accumulation of chloride following exposure. II. Pathological anatomy of hydrogen chloride gas injury

    Energy Technology Data Exchange (ETDEWEB)

    Shriner, D.S.

    1969-01-01

    Hydrogen chloride (HCl) gas damage to plants has not been a historically important problem. However, recent practices in a number of industries, particularly glass manufacturing and pyrolysis of waste plastics, have increased the seriousness of the problem. Studies were carried out under carefully controlled exposure conditions to determine the effects of HCl gas on a relatively sensitive and a relatively resistant plant species. The macroscopic symptoms of most importance in acute damage to tomato and chrysanthemum are glazing of the lower surface, and a bifacial bronzing of interveinal and marginal areas of leaves. Microscopically, glazing was shown to be caused by a collapse of the lower epidermal cells and a partial disorganization of the spongy mesophyll of leaves. Bronzing was shown to be caused by the further collapse of the spongy mesophyll, and in some cases the palisade mesophyll and upper epidermis. Analysis of plant tissues for their free chloride content following an exposure to HCl gas was done with cell-free water extracts which were titrated on an automatic chloride titrator. On the basis of such studies, evidence suggest that the mechanism of accumulation of chlorides in plants is similar to that of fluorides, and that in subacute doses, chlorides are translocated toward the extremities of the foliar portions of the plant. In areas where a number of different types of pollution sources exist, and symptomotology is not definitive in pinpointing the source, chloride analysis of plant tissues should prove valuable as an aid to diagnosis if HCl gas was suspected.

  6. Estimating Natural Recharge by Means of Chloride Mass Balance in a Volcanic Aquifer: Northeastern Gran Canaria (Canary Islands, Spain

    Directory of Open Access Journals (Sweden)

    Gema Naranjo

    2015-05-01

    Full Text Available The chloride mass balance method was used to estimate the average diffuse groundwater recharge on northeastern Gran Canaria (Canary Islands, where the largest recharge to the volcanic island aquifer occurs. Rainwater was sampled monthly in ten rainwater collectors to determine the bulk deposition rate of chloride for the 2008–2014 period. Average chloride deposition decreases inwardly from more than 10 g·m−2·year−1 to about 4 g·m−2·year−1. The application of the chloride mass balance method resulted in an estimated average recharge of about 28 hm3/year or 92 mm/year (24% of precipitation in the study area after subtracting chloride loss with surface runoff. The average storm runoff was estimated to be 12 hm3/year (9% of precipitation for the 1980–2014 period. Runoff was sampled during scarce rainy periods, which produce surface water flow. Average recharge varies from less than a few mm/year near the coast up to 270 mm/year in the highlands (about 33% of average rainfall, with a close-to-linear increase inwardly of about 18 mm·year−1·km−1. Recharge rate uncertainty corresponds to an estimated CV of 0.3–0.4 because of the short data series available.

  7. Electrochemical corrosion behavior of Cu-40Ni-20Cr alloys with different grain sizes in solutions containing chloride ions

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The electrochemical corrosion behavior of the two Cu-40Ni-20Cr alloys prepared by conventional casting(CA) and mechanical alloying(MA) with the different grain sizes was studied by using open-circuit potential(OCP), potentiodynamic polarization and electrochemical impedance spectroscopy(EIS) methods in solutions containing chloride ions. The results show that the free corrosion potentials of the two alloys move towards negative values, corrosion currents increase and therefore corrosion rates become faster with the increase of chloride ion concentrations. EIS plots of CACu-40Ni-20Cr alloy are composed of single capacitive loop, while EIS plots of MACu-40Ni-20Cr alloy are composed of double capacitive loops in solution containing lower chloride ion concentrations. EIS plots of the two alloys have Warburg impedance with the increase of chloride ion concentrations.Corrosion rates of MACu-40Ni-20Cr alloy become faster than those of CACu-40Ni-20Cr alloy obviously in solutions containing the same chloride ion concentrations because MACu-40Ni-20Cr alloy is able to produce large concentrations of grain boundaries in the course of reduction in grain size by mechanical alloying.

  8. Continuous microcellular foaming of polyvinyl chloride and compatibilization of polyvinyl chloride and polylactide composites

    Science.gov (United States)

    Shah, Bhavesh

    This dissertation focuses on overcoming existing limitations of WPCs which prevent them from realizing their full market potential. These limitations include: (i) lack of a continuous extrusion process for microcellular foaming of polyvinyl chloride (PVC) and its composites using supercritical fluids to reduce the high density of the WPCs, (ii) need for an efficient coupling agent for WPCs to overcome the poor compatibility between wood and plastic, and (iii) unproven use of wood as a filler for the biopolymer polylactide (PLA) to make "green" composites. These limitations were addressed through experimentation to develop a continuous extrusion process for microcellular foaming, and through surface modification of wood flour using natural coupling agents. The effects of wood flour, acrylic modifier and plasticizer content on the rheological properties of PVC based WPCs were studied using an extrusion capillary rheometer and a two-level factorial design. Wood flour content and acrylic modifier content were the major factors affecting the die swell ratio. Addition of plasticizer decreased the true viscosity of unfilled and filled PVC, irrespective of the acrylic modifier content. However, the addition of acrylic modifier significantly increased the viscosity of unfilled PVC but decreased the composite viscosity. Results of the rheological study were used to set baseline conditions for the continuous extrusion foaming of PVC WPCs using supercritical CO 2. Effects of material composition and processing conditions on the morphology of foamed samples were investigated. Foamed samples were produced using various material compositions and processing conditions, but steady-state conditions could not be obtained for PVC. Thus the relationships could not be determined. Incompatibility between wood flour and PVC was the focus of another study. The natural polymers chitin and chitosan were used as novel coupling agents to improve interfacial adhesion between the polymer matrix

  9. Self-assembled hemocompatible coating on poly (vinyl chloride) surface

    Science.gov (United States)

    Zha, Zhengbao; Ma, Yan; Yue, Xiuli; Liu, Meng; Dai, Zhifei

    2009-11-01

    A stable hemocompatible coating was fabricated by consecutive alternating adsorption of iron (III) and two kinds of polysaccharides, heparin (Hep) and dextran sulfate (DS), onto poly (vinyl chloride) (PVC) surfaces via electrostatic interaction. The fluctuation of contact angles with the alternative deposition of iron (III) and polysaccharides verified the progressive buildup of the mulitilayer coating onto the PVC surface. Atomic force microscopy (AFM) analysis revealed that the PVC surfaces were completely masked by iron-polysaccharides multilayer coatings. The activated partial thromboplastin time (APTT) assay showed that both Hep/Fe 3+/Hep and DS/Fe 3+/Hep coated PVC were less thrombogenic than the uncoated one. Chromogenic assay for heparin activity proved definitively that the inhibition of locally produced thrombin was ascribed to the thromboresistance of the surface-bound heparin. Compared with the unmodified PVC surfaces, iron-polysaccharide multilayer coating presented a drastically reduced adhesion in vitro of platelets, polymorphonuclear neutrophil leukocytes (PMN) and peripheral blood mononuclear cells (PBMC). Interestingly, the DS/Fe 3+/Hep coating was found to exhibit higher hydrophilicity and stability, hence lower non-specific protein adsorption in comparison with Hep/Fe 3+/Hep coating due to the incorporation of dextran sulfate into the multilayer coating.

  10. Self-assembled hemocompatible coating on poly (vinyl chloride) surface

    Energy Technology Data Exchange (ETDEWEB)

    Zha Zhengbao; Ma Yan; Yue Xiuli; Liu Meng [Nanobiotechnology Division, State Key Laboratory of Urban Water Resources and Environment, School of Sciences, Harbin Institute of Technology, Harbin 150001 (China); Dai Zhifei, E-mail: zhifei.dai@hit.edu.cn [Nanobiotechnology Division, State Key Laboratory of Urban Water Resources and Environment, School of Sciences, Harbin Institute of Technology, Harbin 150001 (China)

    2009-11-15

    A stable hemocompatible coating was fabricated by consecutive alternating adsorption of iron (III) and two kinds of polysaccharides, heparin (Hep) and dextran sulfate (DS), onto poly (vinyl chloride) (PVC) surfaces via electrostatic interaction. The fluctuation of contact angles with the alternative deposition of iron (III) and polysaccharides verified the progressive buildup of the mulitilayer coating onto the PVC surface. Atomic force microscopy (AFM) analysis revealed that the PVC surfaces were completely masked by iron-polysaccharides multilayer coatings. The activated partial thromboplastin time (APTT) assay showed that both Hep/Fe{sup 3+}/Hep and DS/Fe{sup 3+}/Hep coated PVC were less thrombogenic than the uncoated one. Chromogenic assay for heparin activity proved definitively that the inhibition of locally produced thrombin was ascribed to the thromboresistance of the surface-bound heparin. Compared with the unmodified PVC surfaces, iron-polysaccharide multilayer coating presented a drastically reduced adhesion in vitro of platelets, polymorphonuclear neutrophil leukocytes (PMN) and peripheral blood mononuclear cells (PBMC). Interestingly, the DS/Fe{sup 3+}/Hep coating was found to exhibit higher hydrophilicity and stability, hence lower non-specific protein adsorption in comparison with Hep/Fe{sup 3+}/Hep coating due to the incorporation of dextran sulfate into the multilayer coating.

  11. The salt (sodium chloride) requirements of growing bobwhite quail

    Science.gov (United States)

    Nestler, R.B.

    1949-01-01

    In the two experiments involving 452 bobwhite quail chicks, seven diets containing the following salt supplements, were compared: No additional salt; 0.25 per cent KaCl; 0.50 per cent NaC1; 0.75per cent NaCl; 1.00 per cent NaCl; 0.25 per cent Na2SO4; and 0.50 per cent KCl. All four diets containing sodium chloride gave about equal results in bird-growth, and produced better weights than the diet containing no additional salt. Survival was high on the 0.50, 0.75 and 1.00 per cent levels, especially the 0.75 per cent level. Feed consumption increased directly as the salt level of the diet was raised.....The results on the Na2SO4 and KCl while better than those on no saline supplementation, and somewhat inferior to those on NaCl, nevertheless are inconclusive because of inconsistency.

  12. Stepwise modification of titanium alkoxy chloride compounds by pyridine carbinol.

    Science.gov (United States)

    Boyle, Timothy J; Ottley, Leigh Anna M; Rodriguez, Mark A; Sewell, Robin M; Alam, Todd M; McIntyre, Sarah K

    2008-11-17

    The stepwise modifications of stoichiometric mixtures of titanium chloride (TiCl 4) and titanium iso-propoxide (Ti(OPr (i)) 4) by 2-pyridine methanol (H-OPy) led to the isolation of a systematically varied, novel family of compounds. The 3:1 reaction mixture of Ti(OPr (i)) 4:TiCl 4 yielded [Cl(OPr (i)) 2Ti(mu-OPr (i))] 2 ( 1). Modification of 1 with 1 and 2 equiv of H-OPy produced [Cl(OPr (i)) 2Ti(mu c-OPy)] 2 ( 2, where mu c = chelating bridge) and "(OPy) 2TiCl(OPr (i))" ( 3, not crystallographically characterized), respectively. Altering the Ti(OPr (i)) 4 to TiCl 4 stoichiometry to 1:1 led to isolation and identification of another dimeric species [Cl 2(OPr (i))Ti(mu-OPr (i))] 2 ( 4). Upon modification with 1 equiv of H-OPy, [Cl 2(OPr (i))Ti(mu c-OPy)] 2 ( 5) was isolated from toluene and (OPy)TiCl 2(OPr (i))(py) ( 6) from py. An additional equivalent of H-OPy led to the monomeric species (OPy) 2TiCl 2 ( 7). Because of the low solubility and similarity in constructs of these compounds, additional analytical data, such as the beryllium dome or BeD-XRD powder analyses, were used to verify the bulk samples, which were found to be in agreement with the single crystal structures.

  13. Tolerance Test of Eisenia Fetida for Sodium Chloride

    Energy Technology Data Exchange (ETDEWEB)

    Kerr, M.; Stewart, A.J.

    2003-01-01

    Saltwater spills that make soil excessively saline often occur at petroleum exploration and production (E&P) sites and are ecologically damaging. Brine scars appear when produced water from an E&P site is spilled onto surrounding soil, causing loss of vegetation and subsequent soil erosion. Revegetating lands damaged by brine water can be difficult. The research reported here considers earthworms as a bioremedial treatment for increasing the salt mobility in this soil and encouraging plant growth and a healthy balance of soil nutrients. To determine the practical application of earthworms to remediate brine-contaminated soil, a 17-d test was conducted to establish salt tolerance levels for the common compost earthworm (Eisenia fetida) and relate those levels to soil salinity at brine-spill sites. Soil samples were amended with sodium chloride in concentrations ranging from 1 to 15 g/kg, which represent contamination levels at some spill sites. The survival rate of the earthworms was near 90% in all tested concentrations. Also, reproduction was noted in a number of the lower-concentration test replicates but absent above the 3-g/kg concentrations. Information gathered in this investigation can be used as reference in further studies of the tolerance of earthworms to salty soils, as results suggest that E. fetida is a good candidate to enhance remediation at brine-damaged sites.

  14. Self-assembled hemocompatible coating on poly (vinyl chloride) surface

    International Nuclear Information System (INIS)

    A stable hemocompatible coating was fabricated by consecutive alternating adsorption of iron (III) and two kinds of polysaccharides, heparin (Hep) and dextran sulfate (DS), onto poly (vinyl chloride) (PVC) surfaces via electrostatic interaction. The fluctuation of contact angles with the alternative deposition of iron (III) and polysaccharides verified the progressive buildup of the mulitilayer coating onto the PVC surface. Atomic force microscopy (AFM) analysis revealed that the PVC surfaces were completely masked by iron-polysaccharides multilayer coatings. The activated partial thromboplastin time (APTT) assay showed that both Hep/Fe3+/Hep and DS/Fe3+/Hep coated PVC were less thrombogenic than the uncoated one. Chromogenic assay for heparin activity proved definitively that the inhibition of locally produced thrombin was ascribed to the thromboresistance of the surface-bound heparin. Compared with the unmodified PVC surfaces, iron-polysaccharide multilayer coating presented a drastically reduced adhesion in vitro of platelets, polymorphonuclear neutrophil leukocytes (PMN) and peripheral blood mononuclear cells (PBMC). Interestingly, the DS/Fe3+/Hep coating was found to exhibit higher hydrophilicity and stability, hence lower non-specific protein adsorption in comparison with Hep/Fe3+/Hep coating due to the incorporation of dextran sulfate into the multilayer coating.

  15. Redetermination of 1-carboxycyclohexan-1-aminium chloride

    Directory of Open Access Journals (Sweden)

    Teresa González

    2009-02-01

    Full Text Available The crystal structure of the title compound, C7H14NO2+·Cl−, was reported previously [Chacko, Srinivasan & Zand (1975. J. Cryst. Mol. Struct. 5, 353–357] from Weissenberg photographic data with R = 0.113. It has now been redetermined, providing a significant increase in the precision of the derived geometric parameters, viz. mean σ(C—C = 0.003 Å in the present work compared with 0.021 Å for the previous work. The complete cation is generated by crystallographic mirrror symmetry, with three C atoms, two O atoms and the N atom lying on the reflecting plane; the chloride anion also has m site symmetry. The crystal structure is established by a two-dimensional network of O—H...Cl and N—H...Cl hydrogen bonds, generating C12(4 and C12(7 chains, and R24(8 and R24(14 rings.

  16. Chloride, bromide and iodide scintillators with europium

    Energy Technology Data Exchange (ETDEWEB)

    Zhuravleva, Mariya; Yang, Kan

    2016-09-27

    A halide scintillator material is disclosed where the halide may comprise chloride, bromide or iodide. The material is single-crystalline and has a composition of the general formula ABX.sub.3 where A is an alkali, B is an alkali earth and X is a halide which general composition was investigated. In particular, crystals of the formula ACa.sub.1-yEu.sub.yI.sub.3 where A=K, Rb and Cs were formed as well as crystals of the formula CsA.sub.1-yEu.sub.yX.sub.3 (where A=Ca, Sr, Ba, or a combination thereof and X=Cl, Br or I or a combination thereof) with divalent Europium doping where 0.ltoreq.y.ltoreq.1, and more particularly Eu doping has been studied at one to ten mol %. The disclosed scintillator materials are suitable for making scintillation detectors used in applications such as medical imaging and homeland security.

  17. Treatment of automotive wastewater by coagulation-flocculation using poly-aluminum chloride (PAC), ferric chloride (FeCl3) and aluminum sulfate (alum)

    Science.gov (United States)

    Bakar, Abdul Fattah Abu; Halim, Azhar Abdul

    2013-11-01

    A physicochemical treatment (coagulation-flocculation) was applied for automotive wastewater using poly-aluminum chloride (PAC), ferric chloride (FeCl3) and aluminum sulfate (alum) aided by anionic polyacrylamide as flocculant to determine the effectiveness of coagulation method for removal of COD, TSS and heavy metals (Fe, Ni and Zn). The results obtained proved that PAC was comparatively more efficient to FeCl3 and alum. At defined optimum experiment condition (coagulant dose: 70 mg/L, coagulant aid dose: 2 mg/L and pH 7), PAC showed 70% removal for (chemical oxygen demand) COD and 98% of (total suspended solid) TSS. For FeCl3 and alum, the maximum removal for COD were 64% and 54%, meanwhile TSS removal were 91% and 94%. Heavy metals removal using PAC also showed better results in which produced 98% of iron removal, 83% of zinc removal and 63% of nickel removal under optimum condition. The comparison revealed that the use of PAC aided by anionic polyacrylamide produced higher removal for COD, TSS and heavy metals compared to FeCl3 and alum for automotive wastewater treatment.

  18. Denitrification of fertilizer wastewater at high chloride concentration

    DEFF Research Database (Denmark)

    Ucisik, Ahmed Süheyl; Henze, Mogens

    Wastewater from fertilizer industry is characterized by high contents of chloride concentration, which normally vary between 60 and 76 g/l. Experiments with bilogical denitrification were performed in lab-scale "fill and draw" reactors with synthetic wastewater with chloride concentrations up to 77.......4 g/l. The results of the experiments showed that biological denitrification was feasible at the extreme environmental conditions prevailing in fertilizer wastewater. Stable continuous biological denitrfication of the synthetic high chloride wastewater was performed up to 77.4 g Cl/l at 37 degree C...

  19. Calcium chloride in stabilised soil roads and runways

    Directory of Open Access Journals (Sweden)

    Harsh Vardhan

    1952-09-01

    Full Text Available Mudless, dustless, hard and all weather driving surfaces is a serious requirement of the forces.  surfacing by mixtures of definite amounts of locally available stone, gravel, sand, clay and Silt to which calculated amount of calcium chloride is added quickly compact and ultimately harden like concrete. This provides an easy, quick and economic- means of meeting the requirement.  Necessity of such surfaces, use and action of calcium chloride and resulting effects are discussed. Different methods of construction and application of calcium chloride are briefly related.

  20. Durability Analysis of Subway Station in Chloride Environment

    Directory of Open Access Journals (Sweden)

    Yang LuFeng

    2013-02-01

    Full Text Available In this study, a finite element model for chloride ions transport in saturated concrete was proposed based on the Fick’s second law of diffusion. The governing partial differential equation was solved numerically in space as a boundary-value problem and in time as an initial-value problem by means of the finite element formulations. The maximum allowable value of chloride diffusion coefficient within different locations of subway station with service life of 100a was achieved and suggestions for durability analysis of subway station in chloride environment were also proposed.

  1. The ionic product of water in concentrated tetramethylammonium chloride solutions.

    Science.gov (United States)

    Sipos, P; Bódi, I; May, P M; Hefter, G T

    1997-04-01

    The ionic product of water, pK(w) = - log[H(+)][OH(-)] has been determined in aqueous solutions of tetramethylammonium chloride over the concentration range of 0.1-5.5 M at 25 degrees C using high-precision glass electrode potentiometric titrations. pK(w) data relating to aqueous potassium and sodium chlorides at ionic strengths up to 5 M are markedly lower than the tetramethylammonium chloride results. These differences are almost certainly due to weak associations between potassium and (especially) sodium and hydroxide ions.

  2. Ionometric determination of chloride ion in circulating and waste waters

    Energy Technology Data Exchange (ETDEWEB)

    Bebeshko, G.I.; Afanas' eva, V.I.; Danielova, I.I.; Dmitriev, M.A.; Radchenko, A.F.

    1986-09-01

    The authors attempt to develop selective ionometric methods to determine chloride ion in waste and circulating waters from technological ore processing, containing significant amounts of sulfide ion and various flotation reagents. These waters contain practically no cations that form hard to dissolve compounds with chloride ion such as Ag/sup +/, Cu/sup +/, Hg/sup +/ or Pb/sup 2 +/. The chloride ion concentration in water varies between 10 and 100 mg/liter. Information is shown on the concentration of the main anions and flotation reagents in waters that were analyzed.

  3. Stochastic Modeling of Reinforced Concrete Structures Exposed to Chloride Attack

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Frier, Christian

    2003-01-01

    concentration and reinforcement cover depth are modeled by stochastic fields. The paper contains a description of the parameters to be included in a stochastic model and a proposal for the information needed to obtain values for the parameters in order to be ab le to perform reliability investigations...... the reinforcement exceeds a critical threshold value. In the present paper a stochastic model is described by which the chloride content in a reinforced concrete structure can be estimated. The chloride ingress is modeled by a 2-dimensional diffusion process and the diffusion coefficient, surface chloride...

  4. The effect of verapamil and diltiazem on cardiac stimulant effect of adrenaline and calcium chloride on isolated frog heart

    Directory of Open Access Journals (Sweden)

    Lakhavat Sudhakar, Naveen Kumar T, Tadvi NA, Venkata Rao Y

    2013-04-01

    Full Text Available Background: Calcium channel blockers block voltage dependent L-type of calcium channel and thus reduce the frequency of opening of these channels in response to depolarization. The result is a marked decrease in transmembrane calcium current associated with long lasting relaxation of vascular smooth muscle, reduction in contractility in cardiac muscle, decrease in pacemaker activity in the SA node and decrease in conduction velocity in the AV node. Among Calcium channel blockers verapamil, is cardio selective, nifedipine is vascular smooth muscle selective, while diltiazem exhibits intermediate selectivity. Methods: In the present study, the effect of two Ca++ channel blocker, Verapamil and Diltiazem were compared on the isolated frog heart by using adrenaline & calcium chloride as standard on frog heart contractility. Results and conclusion: Adrenaline and calcium chloride increased the amplitude of contraction of isolated perfused frog heart. The L- type of Ca2+ channel blockers verapamil and diltiazem produced dose dependent (2mg, 4mg, 8mg, and 16mg reduction in the amplitude of contraction produced by calcium chloride in isolated perfused frog heart. There was no statistical significant difference (p > 0.05 between the inhibitory effect of diltiazem and verapamil on calcium chloride induced contraction of isolated frog heart.

  5. Applicability of boron-doped diamond electrode to the degradation of chloride-mediated and chloride-free wastewaters

    International Nuclear Information System (INIS)

    The electrochemical degradation of chloride-mediated and chloride-free dye wastewaters was investigated on a boron-doped diamond (BDD) electrode in comparison with that on a dimensionally stable anode (DSA), and the applicability of BDD electrode to the degradation of these two kinds of wastewaters was explored. In chloride-free wastewater, the electrochemical degradation efficiency of dye on BDD electrode was much higher than that on DSA, with a chemical oxygen demand (COD) removal of 100% and 26% for BDD and DSA, respectively. In chloride-mediated dye wastewater, COD removal was faster than that in chloride-free wastewater on both BDD and DSA electrodes with COD removal efficiencies higher than 95%, whereas the rate of COD removal on DSA was faster than that on BDD electrode. The investigation indicates that DSA is more suitable than BDD electrode in degradation of originally chloride contained dye wastewaters for the sake of energy and time saving. However, for chloride-free dye wastewaters, with the aim of environmental protection, BDD electrode is more appropriate to realize complete mineralization. At the same time, the secondary pollution can be avoided

  6. Flotation separation of calcareous minerals using didodecyldimethylammonium chloride as a collector

    Institute of Scientific and Technical Information of China (English)

    Zhang Ying; Wang Yuhua; Li Shiliang

    2012-01-01

    The flotation separation of scheelite from fluorite and calcite using dodecyltrimethylammonium chloride (DTAC),dodecyldimethylbenzylammonium chloride (DDBAC),or didodecyldimethylammonium chloride (DDDAC) as the collector has been investigated.The results show that the selectivity of these collectors for these three calcareous minerals falls in the order:DDDAC > DDBAC > DTAC.A significantly different flotation response of scheelite compared to the other two calcareous minerals was observed over the pH range from 7 to 8 for DDDAC as the collector.A concentrate containing 41.40% W03 could be produced from a feed mixture containing 23.22% WO3 at the DDDAC concentration of 4.0 × 10 -4 mol/L The WO3 recovery was 92.92% under these conditions.The results of zeta potential measurements suggest that electrostatic interactions are the main forces between DDDAC and the minerals.When the concentration of DDDAC is from 2 × 10 -4 to 4 × 10 -3 mol/L large differences in adsorption density,and adsorption kinetics,of DDDAC onto scheelite,calcite,and fluorite provide desirable conditions for achieving high selectivity.

  7. Water and chloride transport in a fine-textured soil in a feedlot pen.

    Science.gov (United States)

    Veizaga, E A; Rodríguez, L; Ocampo, C J

    2015-11-01

    Cattle feeding in feedlot pens produces large amounts of manure and animal urine. Manure solutions resulting from surface runoff are composed of numerous chemical constituents whose leaching causes salinization of the soil profile. There is a relatively large number of studies on preferential flow characterization and modeling in clayed soils. However, research on water flow and solute transport derived from cattle feeding operations in fine-textured soils under naturally occurring precipitation events is less frequent. A field monitoring and modeling investigation was conducted at two plots on a fine-textured soil near a feedlot pen in Argentina to assess the potential of solute leaching into the soil profile. Soil pressure head and chloride concentration of the soil solution were used in combination with HYDRUS-1D numerical model to simulate water flow and chloride transport resorting to the concept of mobile/immobile-MIM water for solute transport. Pressure head sensors located at different depths registered a rapid response to precipitation suggesting the occurrence of preferential flow-paths for infiltrating water. Cracks and small fissures were documented at the field site where the % silt and % clay combined is around 94%. Chloride content increased with depth for various soil pressure head conditions, although a dilution process was observed as precipitation increased. The MIM approach improved numerical results at one of the tested sites where the development of cracks and macropores is likely, obtaining a more dynamic response in comparison with the advection-dispersion equation. PMID:26348833

  8. Water and chloride transport in a fine-textured soil in a feedlot pen

    Science.gov (United States)

    Veizaga, E. A.; Rodríguez, L.; Ocampo, C. J.

    2015-11-01

    Cattle feeding in feedlot pens produces large amounts of manure and animal urine. Manure solutions resulting from surface runoff are composed of numerous chemical constituents whose leaching causes salinization of the soil profile. There is a relatively large number of studies on preferential flow characterization and modeling in clayed soils. However, research on water flow and solute transport derived from cattle feeding operations in fine-textured soils under naturally occurring precipitation events is less frequent. A field monitoring and modeling investigation was conducted at two plots on a fine-textured soil near a feedlot pen in Argentina to assess the potential of solute leaching into the soil profile. Soil pressure head and chloride concentration of the soil solution were used in combination with HYDRUS-1D numerical model to simulate water flow and chloride transport resorting to the concept of mobile/immobile-MIM water for solute transport. Pressure head sensors located at different depths registered a rapid response to precipitation suggesting the occurrence of preferential flow-paths for infiltrating water. Cracks and small fissures were documented at the field site where the % silt and % clay combined is around 94%. Chloride content increased with depth for various soil pressure head conditions, although a dilution process was observed as precipitation increased. The MIM approach improved numerical results at one of the tested sites where the development of cracks and macropores is likely, obtaining a more dynamic response in comparison with the advection-dispersion equation.

  9. Adsorption of Tetradecylpyridinium Chloride on Aqueous Surfaces of Sodium Chloride Solutions

    OpenAIRE

    Fujio, Katsuhiko; Hayashi, Koji; Suzuki, Maki

    2014-01-01

    Surface tension of aqueous NaCl solutions of tetradecylpyridinium chloride (TPC) has been measured by the drop weight method at different NaCl concentrations from 0 to 1.000 mol dm−3 at 25◦C. Surface excess densities of tetradecylpyridinium ion (TP+), Cl− and Na+ have been obtained as functions of TPC concentration at different NaCl concentrations by applying the Gibbs adsorption isotherm to the surface tension data below the critical micelle concentration (CMC) of TPC. Surface excess densiti...

  10. Adsorption of Dodecylpyridinium Chloride on Aqueous Surfaces of Sodium Chloride Solutions

    OpenAIRE

    Fujio, Katsuhiko; TAKEUCHI, Kumiko; Suzuki, Maki

    2012-01-01

    Surface tension of aqueous NaCl solutions of dodecylpyridinium chloride (DPC) has been measured by the drop weight method at different NaCl concentrations from 0 to 1.000 mol dm-3 at 25℃. Applying the Gibbs adsorption isotherm to the surface tension data at DPC concentrations below the critical micelle concentration (CMC), surface excess densities of dodecylpyridinium ion (DP+), Cl- and Na+ have been obtained as functions of DPC concentration at different NaCl concentrations. Surface excess d...

  11. Gadolinium chloride reduces cytochrome P450: relevance to chemical-induced hepatotoxicity.

    Science.gov (United States)

    Badger, D A; Kuester, R K; Sauer, J M; Sipes, I G

    1997-08-15

    The Kupffer cell inhibitor, gadolinium chloride (GdCl3), protects the liver from a number of toxicants that require biotransformation to elicit toxicity (i.e. 1,2-dichlorobenzene and CCl4), as well as compounds that do not (i.e. cadmium chloride and beryllium sulfate). The mechanism of this protection is thought to result from reduced secretion of inflammatory and cytotoxic products from Kupffer cells (KC). However, since other lanthanides have been shown to decrease cytochrome P450 (P450) activity, the following studies were designed to determine if GdCl3 pretreatment alters hepatic P450 levels or activity. The toxicological relevance of GdCl3-mediated alterations in P450 activity was also estimated by determining the effect of GdCl3 pretreatment on the susceptibility of primary cultured hepatocytes to CCl4 and cadmium chloride (CdCl2). Male and female Sprague-Dawley rats were given GdCl3 (i.v., 10 mg/kg). Twenty-four hours later, livers were either processed for preparation of microsomes or for primary cultures of hepatocytes. Gadolinium chloride treatment reduced total hepatic microsomal P450 as well as aniline hydroxylase activity by approximately 30% in males and 20% in females. In hepatocytes isolated from rats pretreated with GdCl3, the toxicity caused by CCl4, but not CdCl2 was reduced. Interestingly, when GdCl3 was administered in vitro to microsomes, there was no effect on either the microsomal P450 difference spectra or p-hydroxylation of aniline. However, when GdCl3 was incubated with isolated hepatocytes, the cytotoxicity of CCl4 (but not CdCl2) was partially attenuated. These results suggest that, in addition to its inhibitory effects on KC, GdCl3 produces other effects which may alter the susceptibility of hepatocytes to toxicity caused by certain chemicals.

  12. High temperature corrosion in chloridizing atmospheres: development of material quasi-stability diagrams and coatings

    Energy Technology Data Exchange (ETDEWEB)

    Doublet, S.; Schuetze, M. [Karl-Winnacker-Institut der DECHEMA e.V., Theodor-Heuss-Allee 25, D-60486 Frankfurt am Main (Germany)

    2004-07-01

    Chlorine gas is widely encountered in chemical industries, e. g. in waste incinerators and plastic/polymer decomposition mills. The presence of chlorine may significantly reduce the life-time of the components. Although metallic materials have been widely used under such conditions there is still a need for data on the role of the different alloying elements in commercial alloys. The purpose of this work is to produce a clear picture of which alloying elements play a detrimental role and which elements are beneficial. These results can be used as a tool for general assessment of metallic alloys with regard to their performance in chloridizing high temperature environments. A previous study has already been performed in oxidizing-chloridizing atmospheres and led to the elaboration of material quasi-stability diagrams. As a follow-up the present work has been performed in reducing-chloridizing atmospheres in order to validate these diagrams at low partial pressures of oxygen. The behaviour of 9 commercial materials where the content of the major alloying elements was varied in a systematic manner was investigated in reducing-chloridizing atmospheres (in Ar containing up to 2 vol.% Cl{sub 2} and down to 1 ppm O{sub 2}) at 800 deg. C. As the thermodynamical approach to corrosion in such atmospheres could not explain all the phenomena which occur, kinetics calculations i.e. diffusion calculations were carried out. Pack cementation and High Velocity Oxy-Fuel (HVOF) coatings were also developed from the best alloying elements previously found by the calculations and the corrosion experiments. Corrosion tests on the coated materials were then performed in the same conditions as the commercial alloys. (authors)

  13. Methyltrioctylammonium chloride catalysed sonochemical synthesis of acridine diones

    Indian Academy of Sciences (India)

    Bhupinder Kaur; Harish Kumar

    2013-09-01

    The greener, clean and efficient protocol for the synthesis of acridine diones derivatives has been achieved by reacting aromatic aldehyde, dimedone and amines using methyltrioctylammonium chloride (Aliquate 336) as a catalyst under ultrasonic irradiations.

  14. Use of saturated sodium chloride solution as a tissue fixative

    Directory of Open Access Journals (Sweden)

    A. Al-Saraj

    2010-01-01

    Full Text Available The present study was carried out to examine the capability of saturated sodium chloride solution as a fixative agent instead of formalin which is regarded as a carcinogenic material. For this purpose 3 rabbits were used and their livers, kidneys and spleens were exposed and removed. Neutral buffered formalin solution, saturated sodium chloride solution and distilled water were used as fixatives for specimens obtained from the first, second and third rabbits respectively. Routine histological technique was performed to prepare a stained histological sections for light microscopic examination. The result showed that the tissue sections which were obtained by using sodium chloride have the same histological features and without any artifacts when they compared with the results obtained using formalin fixation method. We conclude that the saturated sodium chloride solution can be used as a fixative agent in some circumstances when no any fixative agent is available.

  15. Thermodynamic calculation of self-diffusion in sodium chloride

    Science.gov (United States)

    Zhang, Baohua; Li, Chengbo; Shan, Shuangming

    2016-05-01

    Using the available pressure-volume-temperature equation of state of sodium chloride, we show that the self-diffusion coefficients of sodium and chloride in sodium chloride as a function of temperature and pressure can be successfully reproduced in terms of bulk elastic and expansivity data. We use a thermodynamic model that interconnects point-defect parameters with bulk properties. Our calculated diffusion coefficients and point-defect parameters, including activation enthalpy, activation entropy, and activation volume, well agree with reported experimental results when uncertainties are considered. Furthermore, the ionic conductivity of sodium chloride inferred from our predicted diffusivities of sodium through the Nernst-Einstein equation is compared with previous experimental data.

  16. Catalytic Decomposition of Methylene Chloride by Sulfated Titania Catalysts

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Catalytic decomposition of methylene chloride in air below 300℃ was studied.Sulfated titania was very effective in converting 959ppm methylene chloride selectively to CO,CO2 and HCl.Complete decomposition of methylene chloride was achieved at low temperature(275℃).It was found that the acidic property of catalyst was a determinant factor for the catalytic activity.The presence of water vapor in the feed stream remarkably reduced the catalytic activity,which could be due to the blockage of acidic sites on the surface of catalyst by water molecules.A bifunctional catalyst comprising copper oxide was developed to improve the selectivity of catalytic oxidation,which indicated that copper oxide can promote the deep oxidation of methylene chloride.The crystal form of TiO2 imposes an important influence upon the catalytic oxidation.

  17. Chloride supporting electrolytes for all-vanadium redox flow batteries.

    Science.gov (United States)

    Kim, Soowhan; Vijayakumar, M; Wang, Wei; Zhang, Jianlu; Chen, Baowei; Nie, Zimin; Chen, Feng; Hu, Jianzhi; Li, Liyu; Yang, Zhenguo

    2011-10-28

    This paper examines vanadium chloride solutions as electrolytes for an all-vanadium redox flow battery. The chloride solutions were capable of dissolving more than 2.3 M vanadium at varied valence states and remained stable at 0-50 °C. The improved stability appeared due to the formation of a vanadium dinuclear [V(2)O(3)·4H(2)O](4+) or a dinuclear-chloro complex [V(2)O(3)Cl·3H(2)O](3+) in the solutions over a wide temperature range. The all-vanadium redox flow batteries with the chloride electrolytes demonstrated excellent reversibility and fairly high efficiencies. Only negligible, if any, gas evolution was observed. The improved energy capacity and good performance, along with the ease in heat management, would lead to substantial reduction in capital cost and life-cycle cost, making the vanadium chloride redox flow battery a promising candidate for stationary applications. PMID:21922094

  18. Purification and reconstitution of chloride channels from kidney and trachea

    International Nuclear Information System (INIS)

    Chloride channels mediate absorption and secretion of fluid in epithelia, and the regulation of these channels is now known to be defective in cystic fibrosis. Indanyl-oxyacetic acid 94 (IAA-94) is a high-affinity ligand for the chloride channel, and an affinity resin based on that structure was developed. Solubilized proteins from kidney and trachea membranes were applied to the affinity matrix, and four proteins with apparent molecular masses of 97, 64, 40, and 27 kilodaltons were eluted from the column by excess IAA-94. A potential-dependent 36Cl- uptake was observed after reconstituting these proteins into liposomes. Three types of chloride channels with single-channel conductances of 26, 100, and 400 picosiemens were observed after fusion of these liposomes with planar lipid bilayers. Similar types of chloride channels have been observed in epithelia

  19. Stochastic modeling of reinforced concrete structures exposed to chloride attack

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Frier, Christian

    2004-01-01

    For many reinforced concrete structures corrosion of reinforcement is an important problem since it can result in expensive maintenance and repair actions. Further, a significant reduction of the load-bearing capacity can occur. One mode of corrosion initiation is that the chloride content around...... the reinforcement exceeds a critical threshold value. In the present paper a stochastic model is described by which the chloride content in a reinforced concrete structure can be estimated. The chloride ingress is modeled by a 2-dimensional diffusion process and the diffusion coefficient, surface chloride...... concentration and reinforcement cover depth are modeled by stochastic fields. The paper contains a description of the parameters to be included in a stochastic model and a proposal for the information needed to obtain values for the parameters in order to be able to perform reliability investigations...

  20. Chloride supporting electrolytes for all-vanadium redox flow batteries.

    Science.gov (United States)

    Kim, Soowhan; Vijayakumar, M; Wang, Wei; Zhang, Jianlu; Chen, Baowei; Nie, Zimin; Chen, Feng; Hu, Jianzhi; Li, Liyu; Yang, Zhenguo

    2011-10-28

    This paper examines vanadium chloride solutions as electrolytes for an all-vanadium redox flow battery. The chloride solutions were capable of dissolving more than 2.3 M vanadium at varied valence states and remained stable at 0-50 °C. The improved stability appeared due to the formation of a vanadium dinuclear [V(2)O(3)·4H(2)O](4+) or a dinuclear-chloro complex [V(2)O(3)Cl·3H(2)O](3+) in the solutions over a wide temperature range. The all-vanadium redox flow batteries with the chloride electrolytes demonstrated excellent reversibility and fairly high efficiencies. Only negligible, if any, gas evolution was observed. The improved energy capacity and good performance, along with the ease in heat management, would lead to substantial reduction in capital cost and life-cycle cost, making the vanadium chloride redox flow battery a promising candidate for stationary applications.

  1. Solidification of spent TBP solvent with aluminium chloride compounds

    International Nuclear Information System (INIS)

    The new techniques for processing spent TBP was investigated. It was proved that treatment of TBP containing DBP with aluminium chloride resulted in the formation of aluminium phosphate suitable for long term storage and final disposal

  2. Reinforcement corrosion in alkaline chloride media with reduced oxygen concentrations

    International Nuclear Information System (INIS)

    It is commonly considered that the corrosion of steel in concrete is controlled by the oxygen content of the pore solution and there are service life models that relate the corrosion rate to the amount of oxygen. It is also commonly believed that in water saturated conditions the oxygen content in the pores is negligible and that underwater there is no risk of depassivation and the corrosion rate is very low. However, the available data on corrosion rates in immersed conditions do not indicate such performance; on the contrary corrosion develops when sufficient chloride reaches the reinforcement. In the present paper, results are presented for tests performed in alkaline chloride solutions that were purged with nitrogen to reduce the oxygen content. The results indicate that at very low oxygen concentrations, corrosion may develop in the presence of chlorides. The presence or absence of corrosion is influenced by the amount of chloride, the corrosion potential and the steel surface condition. (authors)

  3. Chlorides behavior in raw fly ash washing experiments

    Energy Technology Data Exchange (ETDEWEB)

    Zhu Fenfen, E-mail: zhu@hse.gcoe.kyoto-u.ac.jp [Department of Urban and Environmental Engineering, Graduate School of Engineering, Katsura Campus, Kyoto University, Nishikyo-ku, Kyoto 615-8540 (Japan); Takaoka, Masaki; Oshita, Kazuyuki [Department of Urban and Environmental Engineering, Graduate School of Engineering, Katsura Campus, Kyoto University, Nishikyo-ku, Kyoto 615-8540 (Japan); Kitajima, Yoshinori; Inada, Yasuhiro [High Energy Accelerator Research Organization (KEK), Institute of Material Structure Science (IMSS), Oho 1-1, Tsukuba, Ibaraki 305-0801 (Japan); Morisawa, Shinsuke; Tsuno, Hiroshi [Department of Urban and Environmental Engineering, Graduate School of Engineering, Katsura Campus, Kyoto University, Nishikyo-ku, Kyoto 615-8540 (Japan)

    2010-06-15

    Chloride in fly ash from municipal solid waste incinerators (MSWIs) is one of the obstructive substances in recycling fly ash as building materials. As a result, we have to understand the behavior of chlorides in recycling process, such as washing. In this study, we used X-ray absorption near edge structure (XANES) and X-ray diffraction (XRD) to study the chloride behavior in washed residue of raw fly ash (RFA). We found that a combination of XRD and XANES, which is to use XRD to identify the situation of some compounds first and then process XANES data, was an effective way to explain the chlorides behavior in washing process. Approximately 15% of the chlorine in RFA was in the form of NaCl, 10% was in the form of KCl, 51% was CaCl{sub 2}, and the remainder was in the form of Friedel's salt. In washing experiments not only the mole percentage but also the amount of soluble chlorides including NaCl, KCl and CaCl{sub 2} decreases quickly with the increase of liquid to solid (L/S) ratio or washing frequency. However, those of insoluble chlorides decrease slower. Moreover, Friedel's salt and its related compound (11CaO.7Al{sub 2}O{sub 3}.CaCl{sub 2}) were reliable standards for the insoluble chlorides in RFA, which are strongly related to CaCl{sub 2}. Washing of RFA promoted the release of insoluble chlorides, most of which were in the form of CaCl{sub 2}.

  4. Determination of chloride in geological samples by ion chromatography

    Science.gov (United States)

    Wilson, S.A.; Gent, C.A.

    1983-01-01

    Samples of silicate rocks are prepared by sodium carbonate fusion and then treated by ion chromatography. The method was tested for geological standards with chloride concentration between 0.003 and 3%. Observed chloride concentrations comparedd favorably with literature values. The relative standard deviation and detection limit for the method were 8% and 7 ppm, respectively. Up to 30 determination per 24-hour period were possible. ?? 1983.

  5. Optical Studies on Sol-Gel Derived Lead Chloride Crystals

    OpenAIRE

    Rejeena, I; Lillibai, B; Nithyaja, B; Nampoori, P.N V; P. Radhakrishnan

    2013-01-01

    Optical characterization of lead chloride crystals prepared by sol-gel method is reported. The relevant sol-gel technique is used for the preparation of PbCl2 samples with five different types. In this paper, we report the absorption and fluorescence behaviour of pure, UV& IR irradiated and electric & magnetic field applied lead chloride crystal samples in solution phase at two different concentrations. Optical bandgap and emission studies of these crystals are also done.

  6. cis-Dichloridobis(1,10-phenanthrolinechromium(III chloride

    Directory of Open Access Journals (Sweden)

    Xiaoli Gao

    2011-02-01

    Full Text Available In the title complex, [CrCl2(C12H8N22]Cl, the CrIII ion is situated on a twofold rotation axis and displays a slightly distorted octahedral CrCl2N4 coordination geometry. The Cr environment is composed of a cis arrangement of two 1,10-phenanthroline and two chloride ligands. The chloride counter-anion exhibits half-occupation and is equally disordered over two positions.

  7. Aqueous Chloride Operations Overview: Plutonium and Americium Purification/Recovery

    Energy Technology Data Exchange (ETDEWEB)

    Gardner, Kyle Shelton [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kimball, David Bryan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Skidmore, Bradley Evan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-09-28

    These are a set of slides intended for an information session as part of recruiting activities at Brigham Young University. It gives an overview of aqueous chloride operations, specifically on plutonium and americium purification/recovery. This presentation details the steps taken perform these processes, from plutonium size reduction, dissolution, solvent extraction, oxalate precipitation, to calcination. For Americium recovery, it details the CLEAR (chloride extraction and actinide recovery) Line, oxalate precipitation and calcination.

  8. Effect of kaolin treatment temperature on mortar chloride permeability

    OpenAIRE

    Puertas, F.; Mejía de Gutiérrez, R.; J. Torres

    2007-01-01

    The present paper discusses the results of chloride resistance tests conducted on ordinary Portland cement (OPC) mortars containing a Colombian kaolin pre-treated at temperatures of from 600 to 800 ºC. The resulting metakaolin (MK) was added to OPC mortar mixes in proportions of 10 and 20% by cement weight. The mortars were compared for physical and chemical properties, including capillary absorption, chloride permeability and pore microstructure as assessed by mercury porosimetry....

  9. Extraction and immobilization of simulated pyrometallurgical chloride waste in Zeolite

    International Nuclear Information System (INIS)

    Zeolites are effective media for the removal and immobilization of fission products waste from pyrometallurgical reprocessing of nuclear fuels. In the present study, equilibration experiments between zeolite 4A and a simulated: pyrometallurgical chloride waste were carried out. Several batches of equilibration were carried out by varying the zeolite to salt (Z/S) ratio. The effects of Z/S on the extraction behaviour of the waste chloride salts were explored. (author)

  10. The effect of chloride and sulfate on Completely Recyclable Concrete

    OpenAIRE

    Arvaniti, E.; De Schepper, M.; De Belie, N.; De Buysser, K.; Van Driessche, I.

    2013-01-01

    Completely Recyclable Concrete (CRC) is intended to be recycled as raw material within the cement production from a predesign stage. However, concrete contributions that are exposed to aggressive environments (e.g. industrial and seaside buildings), could carry elements such as chlorides, sulfur and alkalis after demolition, which will end up in the recycled material. The aim of this study is to better understand the influence of chloride and sulfur in CRC on the final clinker properties. The...

  11. Hafnium extraction from acidic chloride solutions by Cyanex 923

    Energy Technology Data Exchange (ETDEWEB)

    El-Ammouri, E.; Distin, P.A. [McGill Univ., Montreal (Canada)

    1996-08-01

    Hafnium extraction from hydrochloric acid/lithium chloride solutions into Cyanex 923 in kerosene has been studied. Variables investigated were hydrochloric acid, total chloride and hafnium concentrations in the aqueous phase, and extractant/modifier (isodecanol) levels in the organic phase. Hafnium is considered to load as the tetrachloride complex forming a disolvate with Cyanex 923. Results are compared with equivalent data for zirconium extraction. 14 refs., 7 figs., 2 tabs.

  12. Intracellular chloride concentration of the mouse vomeronasal neuron

    OpenAIRE

    Kim, Sangseong; Ma, Limei; Unruh, Jay; McKinney, Sean; Yu, C. Ron

    2015-01-01

    Background The vomeronasal organ (VNO) is specialized in detecting pheromone and heterospecific cues in the environment. Recent studies demonstrate the involvement of multiple ion channels in VNO signal transduction, including the calcium-activated chloride channels (CACCs). Opening of CACCs appears to result in activation of VNO neuron through outflow of Cl− ions. However, the intracellular Cl− concentration remains undetermined. Results We used the chloride ion quenching dye, MQAE, to measu...

  13. Computational modelling of chloride ion transport in reinforced concrete

    OpenAIRE

    Meijers, S.J.H.; Bijen, J.M.J.M.; De Borst, R.; Fraaij, A.L.A.

    2001-01-01

    Exposure to a saline environment is a major threat with respect to the durability of reinforced concrete structures. The chloride ions, which are present in seawater and de-icing salts, are able to penetrate the concrete up to the depth of the reinforcement. They can eventually trigger a pitting corrosion process. The assessment of a corrosion-free service life of concrete structures is of paramount economic interest. However, the modelling of the ingress of chloride ions is complicated due t...

  14. Large Scale Synthesis of Carbon Nanofibres on Sodium Chloride Support

    OpenAIRE

    Ravindra Rajarao; Badekai Ramachandra Bhat

    2012-01-01

    Large scale synthesis of carbon nanofibres (CNFs) on a sodium chloride support has been achieved. CNFs have been synthesized using metal oxalate (Ni, Co and Fe) as catalyst precursors at 680 C by chemical vapour deposition method. Upon pyrolysis, this catalyst precursors yield catalyst nanoparticles directly. The sodium chloride was used as a catalyst support, it was chosen because of its non‐toxic and water soluble nature. Problems, such as the detrimental effect of CNFs, the detrimental ef...

  15. Durability Analysis of Subway Station in Chloride Environment

    OpenAIRE

    Yang LuFeng; Yu Bo; Hong Bin

    2013-01-01

    In this study, a finite element model for chloride ions transport in saturated concrete was proposed based on the Fick’s second law of diffusion. The governing partial differential equation was solved numerically in space as a boundary-value problem and in time as an initial-value problem by means of the finite element formulations. The maximum allowable value of chloride diffusion coefficient within different locations of subway station with service life of 100a was achieved and suggestions ...

  16. Influence of cracks on chloride penetration in concrete

    OpenAIRE

    Audenaert, K.; Schutter, G. de; MARSAVINA, L

    2009-01-01

    Chloride initiated reinforcement corrosion is the main durability problem for concrete structures in a marine environment. If the chlorides reach the reinforcement steel, it will depassivate and start to corrode in presence of air and water. Since the corrosion products have a larger volume than the initial products, concrete stresses are induced, leading to spalling and degradation of the concrete structures. If cracks, caused by early drying, thermal effects, shrinkage movements or overstre...

  17. Calcium Chloride as a Co-Coagulant

    OpenAIRE

    Hägg, Kristofer

    2015-01-01

    As populations continue to grow, the demand for fresh drinking water is increasing. This puts a lot of pressure on drinking water producers to strive for more efficient solutions and techniques. Many producers worldwide use surface water as a raw water source, which they often treat through coagulation and flocculation techniques. This is done by adding coagulant (e.g. metal coagulants), creating instability in the suspension, causing flocculation. In this work, PIX-311 (a FeCl3 coagulant pro...

  18. Chloride ion transport performance in slag mortar under fatigue loading

    Institute of Scientific and Technical Information of China (English)

    WANG CaiHui; SUN Wei; JIANG JinYang; HAN JianDe; YE BangTu

    2012-01-01

    The transport performance of chloride ion in slag cement mortar was investigated experimentally.In the self-designed experiment,fatigue loading was coupled simultaneously with ion transportation process,the diffusion law of chloride ion was obtained by titration and the AE (acoustic emission) technique was employed to detect the real-time damage distribution in the mortar specimen.The results for fatigue stress levels of 0.3,0.4 and 0.5 and slag contents of 0,10%,30% and 50% showed that fatigue loading accelerated the diffusion of chloride ion in mortar and the acceleration effect increased with the increase in stress levels.Slag addition was found to improve anti-chloride ion erosion performance effectively with the best substitution level at 30%,because the inhibition effect of slag on chloride ion diffusion diminished when the slag content exceeded 30%.The comparative experiments indicated that dynamic load has a significant effect on the transport performance of chloride ion in slag cement mortar.

  19. Congenital chloride diarrhea: a review of twelve Arabian children

    Directory of Open Access Journals (Sweden)

    Elrefae F

    2013-06-01

    Full Text Available Fawaz Elrefae,1 Ahmed Farag Elhassanien,2 Hesham Abdel-Aziz Alghiaty3 1Pediatric Gastroenterology, Al-Adan Hospital, Kuwait; 2Faculty of Medicine, Elmansoura University, El Mansoura, El Dakahleya, Egypt; 3Faculty of Medicine, Benha University, Egypt Background: Congenital chloride diarrhea (CCD, a rare autosomal recessive disorder, is characterized by sustained watery diarrhea (due to defect of active Chloride/HCO3 exchange in the ileum and colon with high fecal chloride. Objective: To spotlight the common presentation of CCD for early management and prevention of complications. Subjects and methods: This is a retrospective case series study of patients diagnosed as CCD who were followed up in the pediatric department of Al-Adan Hospital, Kuwait. Results: Twelve patients diagnosed with CCD were born to consanguineous parents; had antenatal history of intrauterine growth retardation (IUGR; polyhydramnios; and distended hypoechoic fetal bowel; and presented with abdominal distension, hypotonia and muscle wasting. 90% of patients had maternal hypertension and 75% of patients had absence of normal meconium at birth. Our patients showed a decrease in serum sodium, potassium, chloride and urine chloride. Conclusion: A high level of suspicion for an early diagnosis of CCD should be considered for any infant presenting with chronic diarrhea, especially in the presence of consanguineous marriage, and the characteristic features in antenatal ultrasound. Thus, allowing for early investigations and appropriate management. Keywords: congenital chloride diarrhea, children, chronic diarrhea, metabolic alkalosis, prenatal diagnosis

  20. Stabilizing Plutonium oxide material containing Chloride salts at PFP

    International Nuclear Information System (INIS)

    PFP had over 900 items, weighing more than 1100 kg consisting of impure plutonium oxides referred to as high chloride content plutonium oxides. Tests were conducted to examine items for physical characteristics. After 17 years of storage, the inner food-pack cans maintained integrity with very little evidence of corrosion. Items were washed with water to remove chloride salts. Chloride was readily soluble with plutonium concentrations less than 0.05 g/L in wash solution from all but one of seven items. Washed material was calcined at 1000 C. The calcined material passed the storage test for less than 0.5% water. Unopened items were examined using gamma energy analysis to determine if a prompt gamma (n, x) interaction could be used to screen out items with low chloride concentrations. The prompt gamma was not measurable. A 2168 keV gamma from the (α, x) interaction with chloride correlated within 10% of the chloride concentration measured from washing the item with water

  1. Corrosion characteristics of steel in seawater containing various chloride concentrations generated by electrochemical method

    Institute of Scientific and Technical Information of China (English)

    Seong-Jong KIM; Seok-Ki JANG

    2009-01-01

    The electro-clean system (ECS), a ballast water management system that eliminates harmful aquatic organisms in ship ballast water via electrochemically produced chloride, was developed. The current density for potentiostatic experiments subjected to seawater with an applied potential (-0.1 V) at various TRC concentrations (2×10-6, 6×10-6, 10×10-6, and 15×10-6) have similar results. The current density at -0.1 V has the highest value compared with that at -0.7 V and -0.4 V. For all concentrations, the current density increases with increasing applied potential.

  2. Sodium chloride detection threshold in the rat determined using a simple operant taste discrimination task.

    Science.gov (United States)

    Slotnick, B M

    1982-04-01

    A method for training rats to lick at high rates for a water reinforcer after presentation of one tastant and to inhibit or decrease response rate to avoid a time-out, punisher after presentation of another tastant is described and evaluated. The method produced rapid acquisition of simple discrimination and detection tasks, The absolute mean detection threshold for sodium chloride in three rats was 0.0038% (0.0031%-0.0043%. The operant conditioning technique is simple, efficient, and should prove useful for psychophysical and physiological studies of gustation. PMID:7079384

  3. Physiological engineering of Pseudomonas aurantiaca antimicrobial activity: effects of sodium chloride treatment

    Directory of Open Access Journals (Sweden)

    Linda Rozenfelde

    2012-12-01

    Full Text Available The influence of sodium chloride (NaCl treatment on the antifungal activity of the bacterium Pseudomonas aurantiaca, a producer of biopesticide for vegetable plants, was investigated. It was shown that an increase in the NaCl concentration in incubation solutions from 1 M to 3 M led to a significant increase in the antifungal activity of this bacterium. Antifungal activity continued to increase with prolonged treatment of bacteria in fresh nutrient medium from 72 h to 96 h. These findings could be very important for the further development of biotechnological processes directed not only to the production of new active biopesticides but also of other valuable resources.

  4. DEVELOPMENTAL TOXICITY OF COPPER CHLORIDE, METHYLENE CHLORIDE,AND 6-AMINONICOTINAMIDE TO EMBRYOS OF THE GRASS SHRIMPPALAEMONETES PUGIO

    Science.gov (United States)

    Embryos of estuarine grass shrimp Palaemonetes pugio have demonstrated sensitivity to various solvents and petroleum products, indicating utility for evaluating estuarine contamination. Testing was performed to establish concentration-response curves for methylene chloride, cop...

  5. Role of heat tint on pitting corrosion of 304 austenitic stainless steel in chloride environment

    International Nuclear Information System (INIS)

    The effect of simulated heat tint produced by air oxidation at a wide range of temperatures 200, 400, 600, 800 and 1050 deg. C on pitting potential of 304 austenitic stainless steel was studied in environment of different chloride concentration. It was found that the heat tint effect depends on the heating temperature. The most effective heat tint was that produced at the high temperature up to 1050 deg. C and hence less pitting potential and low corrosion resistance. In order to improve the surface pitting corrosion resistance, acid pickling of hydrochloric acid was applied at different time and temperatures of 15 and 60 min, room temperature and 60 deg. C, respectively. Improvement in pitting potential was achieved as the pickling time and temperature increase. This is can be attributed to the removal of depleted chromium oxide film produced during the heat tint. (authors)

  6. A small synthetic molecule functions as a chloride-bicarbonate dual-transporter and induces chloride secretion in cells.

    Science.gov (United States)

    Liu, Peng-Yun; Li, Shing-To; Shen, Fang-Fang; Ko, Wing-Hung; Yao, Xiao-Qiang; Yang, Dan

    2016-05-31

    A C2 symmetric small molecule composed of l-phenylalanine and isophthalamide was found to function as a Cl(-)/HCO3(-) dual transporter and self-assemble into chloride channels. In Ussing-chamber based short-circuit current measurements, this molecule elicited chloride-dependent short-circuit current (Isc) increase in both Calu-3 cell and CFBE41o-cell (with F508del mutant CFTR) monolayers. PMID:27188496

  7. Ab initio Investigations of the Equilibria between Trichlorothioacetyl Chloride, Tetrachlorothiirane, and Trichloroethenesulfenyl Chloride, their Reactants and Decomposition Products

    DEFF Research Database (Denmark)

    Pedersen, Kim Vestergaard; Christensen, Henrik; Shim, Irene;

    2004-01-01

    Trichlorothioacetyl chloride 1, tetrachlorothiirane 2, and trichloroethenesulfenyl chloride 3 and the equilibria between them have been investigated by ab initio Hartree-Fock (HF), Møller-Plesset second order perturbation (MP2) calculations, and by Gaussian-3 theory, G3(MP2). The transition state...... of the isomerization reactions have been identified. Also investigated were possible reactions leading to the isomers and their possible decomposition products. The results show that the unobserved isomerization reactions are feasible....

  8. Technical note: Could benzalkonium chloride be a suitable alternative to mercuric chloride for preservation of seawater samples?

    OpenAIRE

    Gloël, J.; Robinson, C.; Tilstone, G. H.; Tarran, G.; J. Kaiser

    2015-01-01

    Instrumental equipment unsuitable or unavailable for fieldwork as well as lack of ship space can necessitate the preservation of seawater samples prior to analysis in a shore-based laboratory. Mercuric chloride (HgCl2) is routinely used for such preservation, but its handling and subsequent disposal incur environmental risks and significant expense. There is therefore a strong motivation to find less hazardous alternatives. Benzalkonium chloride (BAC) has been used previousl...

  9. Technical Note: Could benzalkonium chloride be a suitable alternative to mercuric chloride for preservation of seawater samples?

    OpenAIRE

    Gloël, J.; Robinson, C.; Tilstone, G. H.; Tarran, G.; J. Kaiser

    2015-01-01

    Instrumental equipment unsuitable or unavailable for fieldwork as well as lack of ship space can necessitate the preservation of seawater samples prior to analysis in a shore-based laboratory. Mercuric chloride (HgCl2) is routinely used for such preservation, but its handling and subsequent disposal incur significant risks and expense. Benzalkonium chloride (BAC) has been used previously for freshwater samples. Here, we assess BAC as a less hazardous alterna...

  10. 40 CFR 61.63 - Emission standard for vinyl chloride plants.

    Science.gov (United States)

    2010-07-01

    ... formation and purification: The concentration of vinyl chloride in each exhaust gas stream from any... 40 Protection of Environment 8 2010-07-01 2010-07-01 false Emission standard for vinyl chloride... for Vinyl Chloride § 61.63 Emission standard for vinyl chloride plants. An owner or operator of...

  11. Effects of crocin and zinc chloride on blood levels of zinc and metabolic and oxidative parameters in streptozotocin-induced diabetic rats

    Directory of Open Access Journals (Sweden)

    Siamak Asri-Rezaei

    2015-08-01

    Full Text Available Objectives:Crocin is one of constituents of saffron and has antioxidant property. Zinc chloride is one of the common compounds of zinc with antioxidant activity. The present study was aimed to investigate separate and combined treatment effects of crocin and zinc chloride on blood levels of zinc and metabolic and oxidative parameters in diabetic rats. Materials and Methods:Diabetes was induced by intraperitoneal (i.p. injection of 50 mg/kg of streptozotocin (STZ and was confirmed by blood glucose levels higher than 250 mg/dL. After confirmation of diabetes, injections (i.p. of crocin and zinc chloride were performed for six weeks. At the end of the experiment, blood levels of zinc, glucose, insulin, malodialdehyde (MDA, and total antioxidant capacity (TAC were measured. ‎ Results:Crocin (25 and 50 mg/kg and zinc chloride (5 mg/kg significantly recovered the decreased levels of zinc, insulin, and TAC and improved the increased levels of glucose and MDA in STZ-induced diabetic rats. In a combination treatment performed with an ineffective dose of crocin (12.5 mg/kg and a low dose of zinc chloride (1.25 mg/kg, improving effects were observed on the above-mentioned biochemical parameters.‎ Conclusions: The results indicated that separate and combined treatments with crocin and zinc chloride produced improving effects on the blood levels of zinc, glucose, insulin, MDA and TAC in STZ-induced diabetic rats.‎

  12. Rapid conversion of cellulose to 5-hydroxymethylfurfural using single and combined metal chloride catalysts in ionic liquid%Rapid conversion of cellulose to5-hydroxymethylfurfural using single and combined metal chloride catalysts in ionic liquid

    Institute of Scientific and Technical Information of China (English)

    Hussein Abou-Yousef; El Barbary Hassan; Philip Steele

    2013-01-01

    Direct conversion of cellulose into 5-hydroxymethylfurfural (HMF) was performed by using single or combined metal chloride catalysts in 1-ethyl-3-methylimidazolium chloride ([EMIM] Cl) ionic liquid.Our study demonstrated formation of 2-furyl hydroxymethyl ketone (FHMK),and furfural (FF) simultaneously with the formation of HMF.Various reaction parameters were addressed to optimize yields of furan derivatives produced from cellulose by varying reaction temperature,time,and the type of metal chloride catalyst.Catalytic reaction by using FeCl3 resulted in 59.9% total yield of furan derivatives (HMF,FHMK,and FF) from cellulose.CrCl3 was the most effective catalyst for selective conversion of cellulose into HMF (35.6%) with less concentrations of FHMK,and FF.Improving the yields of furans produced from cellulose could be achieved via reactions catalyzed by different combinations of two metal chlorides.Further optimization was carried out to produce total furans yield 75.9% by using FeC13/CuCl2 combination.CrCl3/CuCl2 was the most selective combination to convert cellulose into HMF (39.9%) with total yield (63.8%) of fttrans produced from the reaction.The temperature and time of the catalytic reaction played an important role in cellulose conversion,and the yields of products.Increasing the reaction temperature could enhance the cellulose conversion and HMF yield for short reaction time intervals (5 ~ 20 min).

  13. Characterization of the lanthanum chloride scintillation detector

    International Nuclear Information System (INIS)

    This paper reports about the investigations on the performance of the new earth-rare halide Scintillator, the LaCl3:10%Ce, which has been discovered with attractive scintillation properties: fast, efficient, and high-energy resolution. The combination of good brightness and linear response has naturally resulted in a very good energy resolution, whereas the fast decay time promoted counting applications at very high rate and very fast timing resolution. Energy resolutions of (2.99±0.02) %, (8.66±0.02) %, and (2.05±0.01) % have been achieved by exciting the detector with 662 keV 137Cs, 122 keV 152Eu, and 1332.5 keV 60Co sources respectively, at room temperature. The variations of the resolution as a function of both shaping time and high voltage have been studied and found to be relatively linear. The timing resolution was also studied. The value of 1.07 ns FWHM has been recorded with LaCl3:10%Ce and BaF2 detectors operating in coincidence mode, using 1333.5 keV γ-ray 60Co peak. Compared to similar studies, this timing resolution was worse than expected even if the exciting radioactive sources used in the two experiments were different. The efficiency values of (0.24±0.01)%, (0.01±0.01)% and (0.09±0.01)% were obtained with laboratory 137Cs, 152Eu, 60Co isotopes respectively. These detector efficiency values were very low, due to the smaller detector sizes used in these earlier crystals and to the large detector-source-distance used in this experiment. The Lanthanum Chloride Scintillator detector is hygroscopic and relatively expensive compared to established scintillators. In addition, it carries internal contamination in 138La and 227Ac for larger thicknesses. Nevertheless, the energy resolution figures achieved, twice as good as that of NaI(Tl), are in good agreement with those reported elsewhere. They credit the scintillation detectors as good challengers of semiconductor-based detectors, allowing their application fields to be extended. (author)

  14. [Pulmonary manifestations of polyvinyl chloride exposure].

    Science.gov (United States)

    Süyür, Hüseyin; Bayram, Nazan; Aydın, Neriman; Uyar, Meral; Gündoğdu, Nevhiz; Elbek, Osman

    2011-01-01

    There is currently no national data on the effects of polyvinyl chloride (PVC) exposure on pulmonary function. In this study we recruited workers and administrative staff from two PVC plants between July 2008 and July 2009. A questionnaire, pulmonary function tests, carbon monoxide diffusion capacity, and peak flows were recorded. Particulate matter analyses were performed by the Adana Central Laboratory of the Directorate of Occupational Health and Safety. Data were analyzed with SPSS 13.0 software. Nine of the 147 subjects were female. The incidence of a cough was more common in the administrative group. Of the study population, 59.1% were smokers. Tobacco addiction significantly increased cough and dyspnea [OR= 1.10 (1.00-1.20, 95% CI) p= 0.007 and OR= 1.08 (1.02-1.14, 95% CI), p= 0.008, respectively]. Dust exposure was correlated with the incidence of a cough [OR= 0.20 (0.04-0.80, 95% CI) p= 0.008]. The period of work correlated with sputum production [OR= 1.00 (1.00-1.02, 95% CI) p= 0.044]. The FVC% was significantly higher in the administrative group, and FEV1/FVC and DLCO were higher in the exposed group. Tobacco addiction increased the risk of airflow limitation, as evaluated by FEV1/FVC < 70% and FEF25-75 < 50% [OR= 1.15 (1.06-1.25, 95% CI) p= 0.001 and OR= 1.09 (1.02-1.17, 95% CI) p= 0.010, respectively]. Tobacco addiction and increasing duration of work had a negative influence on DLCO in the exposed group (r= -0.270, p= 0.025 and r= -0.210, p= 0.037). In the exposed group PEF variability was significantly greater on workdays, compared with rest days. This study shows that tobacco consumption has a greater affect on the airways than PVC dust exposure. A median of 36 months exposure to PVC dust had no significant impact on pulmonary function parameters, except for DLCO and PEF variability.

  15. Henry’s constant of carbon dioxide-aqueous deep eutectic solvent (choline chloride/ethylene glycol, choline chloride/glycerol, choline chloride/malonic acid) systems

    International Nuclear Information System (INIS)

    Highlights: • A new set of Henry’s constant for the system carbon dioxide-aqueous deep eutectic solvents were measured. • The DESs used were: ethaline, glyceline, and maline. • The measured data were reported as functions of temperature and composition. • The measured data were represented satisfactorily by the applied correlations. -- Abstract: In this study, we present a new set of Henry’s constant data for the system carbon dioxide-aqueous deep eutectic solvent (DES) (20 to 80 wt% DES) at T = (303.15, 308.15, and 313.15) K. The DESs used were choline chloride-based: ethaline (choline chloride/ethylene glycol), glyceline (choline chloride/glycerol), and maline (choline chloride/malonic acid). A differential Henry’s coefficient model was used to describe the behaviour of Henry’s constant, and correlate it with temperature and concentration of DES in the aqueous DES solution. The correlation was found satisfactory such that the proposed model can be used in engineering calculations with reasonable accuracy

  16. Catalase, superoxide dismutase, and hemolysin activities and heat susceptibility of Listeria monocytogenes after growth in media containing sodium chloride.

    OpenAIRE

    Dallmier, A W; Martin, S E

    1990-01-01

    The activities of catalase, superoxide dismutase, and a thiol-activated hemolysin produced by four strains of Listeria monocytogenes propagated in media containing various concentrations of sodium chloride were examined. L. monocytogenes 7644 showed an increase in catalase, superoxide dismutase, and thiol-activated hemolysin activities when grown in a medium containing 2.5% (wt/vol) NaCl followed by a decrease in activities when propagated in media containing salt concentrations higher than 2...

  17. Synthesis by-products from the Wacker oxidation of safrole in methanol using rho-benzoquinone and palladium chloride.

    Science.gov (United States)

    Cox, M; Klass, G

    2006-12-20

    This paper reports the identification of a number of by-products, which are produced during the Wacker oxidation of safrole to 3,4-methylenedioxyphenyl-2-propanone (MDP2P) using rho-benzoquinone and palladium chloride when methanol is utilised as the solvent. Also described is the retrieval of these compounds from illicit samples from a clandestine laboratory, which was uncovered in South Australia in September 2003.

  18. Roles of Novel Reactive Cationic Copolymers of 3-Chloro-2-hydroxypropylmethyldiallylammonium Chloride and Dimethyldiallylammonium Chloride in Fixing Anionic Dyes on Cotton Fabric

    Directory of Open Access Journals (Sweden)

    Yikai Yu

    2013-01-01

    Full Text Available The roles of novel reactive cationic copolymers (P(CMDA-DMDAACs of 3-chloro-2-hydroxypropylmethyldiallylammonium chloride (CMDA and dimethyldiallylammonium chloride (DMDAAC in fixing anionic dyes on cotton fabric were studied by modern instrumental analysis technologies such as FT-IR spectra and SEM analysis, to achieve the new theoretical guides for the wide applications of those dye fixatives. The FT-IR spectra of the obtained insoluble-water color lakes verified that they could be formed from the electrostatic interactions of the P(CMDA-DMDAACs with anionic dyes, which were further confirmed by the FT-IR analysis of the anionic dyes on dyeing cotton sample fixed by P(CMDA-DMDAACs. The FT-IR spectra of cotton samples fixed by P(CMDA-DMDAACs showed the absorptions of P(CMDA-DMDAACs and the signs similar to the formation of new ether linkage on cotton fabric even after being repeatedly washed, which were further confirmed by the SEM analysis of the fixed dyeing cotton samples. Thus, the reactive units (CMDA of the obtained P(CMDA-DMDAACs could be expected to bring about the covalent bonds with the hydroxyl groups of cotton (cellulose to form an ether linkage when fixing, resulting in the stronger interactions of P(CMDA-DMDAACs with cotton fabric, as well as their electrostatic forces with anionic dyes to produce the insoluble-water color lakes, for the development of fastness of anionic dyes on cotton fabric.

  19. Resistance of Alkali-Activated Slag Concrete to Chloride-Induced Corrosion

    OpenAIRE

    Joon Woo Park; Ki Yong Ann; Chang-Geun Cho

    2015-01-01

    The corrosion resistance of steel in alkali-activated slag (AAS) mortar was evaluated by a monitoring of the galvanic current and half-cell potential with time against a chloride-contaminated environment. For chloride transport, rapid chloride penetration test was performed, and chloride binding capacity of AAS was evaluated at a given chloride. The mortar/paste specimens were manufactured with ground granulated blast-furnace slag, instead of Portland cement, and alkali activators were added ...

  20. Simulation of Chloride Diffusion in Cracked Concrete with Different Crack Patterns

    OpenAIRE

    Xiao-Yong Wang; Li-Na Zhang

    2016-01-01

    Chloride-induced corrosion of steel rebar is one of the primary durability problems for reinforced concrete structures in marine environment. Furthermore, if the surfaces of concrete structures have cracks, additional chloride can penetrate into concrete through cracked zone. For chloride ingression into cracked concrete, former researches mainly focus on influence of crack width on chloride diffusion coefficients. Other crack characteristics, such as chloride depth, crack shape (equal-width ...

  1. Management of metal chlorides in high temperature processes—Application to the nuclear wastes treatment

    International Nuclear Information System (INIS)

    Highlights: ► We study the differences observed between modelling and analysis for chlorine linked with metals. ► We explain the differences with the adsorption of chlorine on activated surface. ► We explain the conditions of chlorine realise and we study the consequences of the phosphatation in thermal process. ► We propose to revise phosphatising technique to drive the metals in proper place in the process. ► This study allows to enhance the safety and lifetime of process used to treat hazardous materials. - Abstract: Thermal processes are now the benchmark for the destruction of some waste whose toxicity requires special attention and management. Over many years the Commissariat à l’Énergie Atomique (French atomic energy commission) has developed technologies to process radioactive waste containing many metals together with chlorine, and thus with a major risk of producing volatile chlorides with potentially catastrophic effects on plant facilities. To mitigate these difficulties in an incineration process for radioactive waste contaminated by plutonium (IRIS), the CEA has investigated the processes by which potentially hazardous compounds are produced in order to eliminate them or prevent their formation. The studies have led to propose a phosphate-based stabilization technique thanks to an addition of phosphorus in the waste. Through a reaction occurring in gas phase, the metals are stabilized under a phosphate form when the formation of volatiles chlorides is avoided. While this technique has substantially improved process maintenance and security, it has revealed other difficulties related to potentially large phosphate deposits capable to cause unacceptable pressure drops detrimental to the gas flow conditions. This article describes the results of recent studies seeking to prevent the formation of volatile chlorides and phosphate deposits liable to obstruct the system flow lines.

  2. Effect of n-tetradecanol on the extraction of iron(III), cobalt(II), and zinc(II) chlorides with tri-n-dodecylammonium chloride

    International Nuclear Information System (INIS)

    Equations are proposed to describe the reduction in the partition coefficients of metal chlorides in amine extractant systems following the addition of alcohols. The equations include two empirical factors: solvation parameters for amine chloride and the compound undergoing extraction. These parameters can be found from independent data. The equations have been used to describe the extraction of micro amounts of iron(III), cobalt(II), and zinc(II) chlorides by tridodecylammonium chloride in the presence of n-tetradecanol

  3. A spectroscopic study of uranium species formed in chloride melts

    International Nuclear Information System (INIS)

    The chlorination of uranium metal or uranium oxides in chloride melts offers an acceptable process for the head-end of pyrochemical reprocessing of spent nuclear fuels. The reactions of uranium metal and ceramic uranium dioxide with chlorine and with hydrogen chloride were studied in the alkali metal chloride melts, NaCl-KCl at 973K, NaCl-CsCl between 873 and 923K and LiCl-KCl at 873K. The uranium species formed therein were characterized from their electronic absorption spectra measured in situ. The kinetic parameters of the reactions depend on melt composition, temperature and chlorinating agent used. The reaction of uranium dioxide with oxygen in the presence of alkali metal chlorides results in the formation of alkali metal uranates. A spectroscopic study, between 723 and 973K, on their formation and their solutions was undertaken in LiCl, LiCl-KCl eutectic and NaCl-CsCl eutectic melts. The dissolution of uranium dioxide in LiCl-KCl eutectic at 923K containing added aluminium trichloride in the presence of oxygen has also been investigated. In this case, the reaction leads to the formation of uranyl chloride species. (author)

  4. Synthesis and Characterization of A Small Molecule CFTR Chloride Channel Inhibitor

    Institute of Scientific and Technical Information of China (English)

    HE Cheng-yan; ZHANG Heng-jun; SU Zhong-min; ZHOU Jin-song; YANG Hong; MA Tong-hui

    2004-01-01

    A thiazolidinone CFTR inhibitor(CFTRinh-172) was synthesized by a three-step procedure with trifluromethylaniline as the starting material. The synthesized CFTR inhibitor was characterized structurally by means of 1H NMR and functionally in a CFTR-expressing cell line FRT/hCFTR/EYFP-H148Q by both fluorescent and electrophysiological methods. A large amount(100 g) of high-quality small molecule thiazolidinone CFTR chloride channel inhibitor, CFTRinh-172, can be produced with this simple three-step synthetic procedure. The structure of the final product 2-thioxo-3-(3-trifluromethylphenyl)-5-[4-carboxyphenyl-methylene]-4-thiazolidinone was confirmed by 1H NMR. The overall yield was 58% with a purity over 99% as analyzed by HPLC. The synthesized CFTRinh-172 specifically inhibited CFTR chloride channel function in a cell-based fluorescence assay(Kd≈1.5 μmol/L) and in a Ussing chamber-based short-circuit current assay(Kd≈0.2 μmol/L), indicating better quality than that of the commercial combinatorial compound. The synthesized inhibitor is nontoxic to cultured cells at a high concentration and to mouse at a high dose. The synthetic procedure developed here can be used to produce a large amount of the high-quality CFTRinh-172 suitable for antidiarrheal studies and for creation of cystic fibrosis models in large animals. The procedure can be used to synthesize radiolabled CFTRinh-172 for in vivo pharmacokinetics studies.

  5. Chloride channel protein 2 prevents glutamate-induced apoptosis in retinal ganglion cells

    Science.gov (United States)

    Bi, Miao-Miao; Hong, Sen; Ma, Ling-Jun; Zhou, Hong-Yan; Lu, Jia; Zhao, Jing; Zheng, Ya-Juan

    2016-01-01

    Objective(s): The purpose of this study was to investigate the role of chloride channel protein 2 (ClC-2) in glutamate-induced apoptosis in the retinal ganglion cell line (RGC-5). Materials and Methods: RGC-5 cells were treated with 1 mM glutamate for 24 hr. The expression of ClC-2, Bax, and Bcl-2 was detected by western blot analysis. Cell survival and apoptosis were measured by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) and flow cytometry assays, respectively. Caspase-3 and -9 activities were determined by a colorimetric assay. The roles of ClC-2 in glutamate-induced apoptosis were examined by using ClC-2 complementary deoxyribonucleic acid (cDNA) and small inference ribonucleic acid (RNA) transfection technology. Results: Overexpression of ClC-2 in RGC-5 cells significantly decreased glutamate-induced apoptosis and increased cell viability, whereas silencing of ClC-2 with short hairpin (sh) RNA produced opposite effects. ClC-2 overexpression increased the expression of Bcl-2, decreased the expression of Bax, and decreased caspase-3 and -9 activation in RGC-5 cells treated with glutamate, but silencing of ClC-2 produced opposite effects. Conclusion: Our data suggest that ClC-2 chloride channels might play a protective role in glutamate-induced apoptosis in retinal ganglion cells via the mitochondria-dependent apoptosis pathway. PMID:27635193

  6. Self-sustained thin webs consisting of porous carbon nanofibers for supercapacitors via the electrospinning of polyacrylonitrile solutions containing zinc chloride

    Energy Technology Data Exchange (ETDEWEB)

    Kim, C.; Ngoc, B.T.N.; Yang, K.S. [Center for Functional Nano Fine Chemicals, Chonnam National University, 300 Yong-bond dong, Buk-gu, Gwangju 500-757 (Korea); Kojima, M.; Kim, Y.A.; Kim, Y.J.; Endo, M. [Faculty of Engineering, Shinshu University, 4-17-1 Wakasato, Nagano-shi 380-8553 (Japan); Yang, S.C. [AMOTECH Co., Ltd, 597-2 Wonsanri, Hasungmyun, Gimpo, Gyunggido (Korea)

    2007-09-03

    We present a simple strategy for the fabrication of porous carbon nanofibers (see figure). This procedure produces thin webs by electrospinning a polymer solution containing different concentrations of zinc chloride and subsequently thermally treating the system. Their resulting surface area and good electrical conductivity make these porous carbon nanofibers useful in the fabrication of efficient electrodes for supercapacitors. (Abstract Copyright [2007], Wiley Periodicals, Inc.)

  7. Separating refractory and non-refractory particulate chloride and estimating chloride depletion by aerosol mass spectrometry in a marine environment

    Directory of Open Access Journals (Sweden)

    I. Nuaaman

    2015-01-01

    Full Text Available Aerosol composition and concentration measurements along the coast of California were obtained using an Aerodyne high-resolution time-of-flight aerosol mass spectrometer (HR-AMS onboard the research vessel Atlantis during the CalNex study in 2010. This paper focuses on the measurement of aerosol chloride using the HR-AMS that can be ambiguous in regions with significant quantities of sea salt aerosols. This ambiguity arises due to large differences in the sensitivity of the HR-AMS to refractory chloride species (i.e., NaCl and non refractory chloride species (i.e., NH4Cl, HCl, etc.. Using the HR-AMS, the aerosol chloride signal is typically quantified using ion signals for 35Cl+, H35Cl+, 37Cl+ and H37Cl+ (HxCl+. During this study, the highest aerosol chloride signal was observed during sea sweep experiments when the source of the aerosol chloride was NaCl present in artificially generated sea salt aerosols even though the HR-AMS has significantly lower sensitivity to such refractory species. Other prominent ion signals that arise from NaCl salt were also observed at m/z 22.99 for Na+ and m/z 57.96 for Na35Cl+ during both sea sweep experiments and during periods of ambient measurements. Thus, refractory NaCl contributes significantly to the HxCl+ signal, interfering with attempts to quantify non sea salt chloride (nssCl. It was found that during ambient aerosol measurements, the interference in the HxCl+ signal from sea salt chloride (ssCl was as high as 89%, but with a study wide average of 10%. The Na35Cl+ ion signal was found to be a good tracer for NaCl. We outline a method to establish nssCl in the ambient aerosols by subtracting the sea salt chloride (ssCl signal from the HxCl+ signal. The ssCl signal is derived from the Na35Cl+ ion tracer signal and the HxCl+ to Na35Cl+ ratio established from the sea sweep experiments. Ambient submicron concentrations of ssCl were also established using the

  8. Molten Triazolium Chloride Systems as New Aluminum Battery Electrolytes

    DEFF Research Database (Denmark)

    Vestergaard, B.; Bjerrum, Niels; Petrushina, Irina;

    1993-01-01

    The possibility of using molten mixtures of 1,4-dimethyl-1,2,4-triazolium chloride (DMTC) and aluminum chloride (AlCl3) as secondary battery electrolytes was studied, in some cases extended by the copresence of sodium chloride. DMTC-AlCl, mixtures demonstrated high specific conductivity in a wide......-170-degrees-C) depending on melt acidity and anode material. DMTC, being specifically adsorbed and reduced on the tungsten electrode surface, had an inhibiting effect on the aluminum reduction, but this effect was suppressed on the aluminum substrate. An electrochemical process with high current density (tens...... of milliamperes per square centimeter) was observed at 0.344 V on the acidic sodium tetrachloroaluminate background, involving a free triazolium radical mechanism. Molten DMTC-AlCl3 electrolytes are acceptable for battery performance and both the aluminum anode and the triazolium electrolyte can be used as active...

  9. Cystic fibrosis with normal sweat chloride concentration: case report

    Directory of Open Access Journals (Sweden)

    Silva Filho Luiz Vicente Ferreira da

    2003-01-01

    Full Text Available Cystic fibrosis is a genetic disease usually diagnosed by abnormal sweat testing. We report a case of an 18-year-old female with bronchiectasis, chronic P. aeruginosa infection, and normal sweat chloride concentrations who experienced rapid decrease of lung function and clinical deterioration despite treatment. Given the high suspicion ofcystic fibrosis, broad genotyping testing was performed, showing a compound heterozygous with deltaF508 and 3849+10kb C->T mutations, therefore confirming cystic fibrosis diagnosis. Although the sweat chloride test remains the gold standard for the diagnosis of cystic fibrosis, alternative diagnostic tests such as genotyping and electrophysiologic measurements must be performed if there is suspicion of cystic fibrosis, despite normal or borderline sweat chloride levels.

  10. Novel vanadium chloride/polyhalide redox flow battery

    Science.gov (United States)

    Skyllas-Kazacos, Maria

    This paper describes a novel redox flow cell which employs a polyhalide solution in the positive half-cell electrolyte and a vanadium(II)/vanadium(III) chloride redox couple as the negative half-cell electrolyte. During charging, the bromide ions in the positive half-cell are considered to undergo oxidation to the polyhalide ion Br 2Cl -; the formal potential of this couple is about 0.8 V versus the saturated calomel electrode (SCE). When combined with a formal potential of around -0.5 V versus SCE for the V(III)/V(III) coupled in the chloride supporting electrolyte, an overall cell potential of approximately 1.3 V would be expected for the vanadium chloride/polyhalide redox flow cell.

  11. Chloride channels of platelets%血小板氯通道

    Institute of Scientific and Technical Information of China (English)

    陈晓琳; 尹松梅

    2004-01-01

    Chloride channels distribute widely in the body, and participate in many physiological actions and regulatory processes. Based on their physiological roles and molecular structures, six kinds of chloride channels have been identified: (1) The chloride channels family; (2) Cystic fibrosis transmembrane conductance regulator; (3) Swelling-activated chloride channels; (4) Calcium-activated chloride channels; (5) The p64 (CLIC) gene family; (6) γ-aminobutyric acid and glycine receptors. The chloride channels do exist in platelets, and their appearances are dependent on the presence of intracellular calcium. Blocking agents of chloride channels inhibit the thrombin-activated platelet aggregation and the elevation of the intracellular calcium concentration in a dose-dependent manner. It is suggested that chloride channels play a role in the activation of platelets. In addition, chloride channels act on both the cell volume regulation and the intracellular pH regulation in platelets.

  12. Examining the impact of heterogeneous nitryl chloride production on air quality across the United States

    Directory of Open Access Journals (Sweden)

    G. Sarwar

    2012-02-01

    Full Text Available The heterogeneous hydrolysis of dinitrogen pentoxide (N2O5 has typically been modeled as only producing nitric acid. However, recent field studies have confirmed that the presence of particulate chloride alters the reaction product to produce nitryl chloride (ClNO2 which undergoes photolysis to generate chlorine atoms and nitrogen dioxide (NO2. Both chlorine and NO2 affect atmospheric chemistry and air quality. We present an updated gas-phase chlorine mechanism that can be combined with the Carbon Bond 05 mechanism and incorporate the combined mechanism into the Community Multiscale Air Quality modeling system. We then update the current model treatment of heterogeneous hydrolysis of N2O5 to include ClNO2 as a product. The model, in combination with a comprehensive inventory of chlorine compounds, reactive nitrogen, particulate matter, and organic compounds, is used to evaluate the impact of the heterogeneous ClNO2 production on air quality across the United States for the months of February and September in 2006. The heterogeneous production increases ClNO2 in coastal as well as many in-land areas in the United States. Particulate chloride derived from sea-salts, anthropogenic sources, and forest fires activates the heterogeneous production of ClNO2. With current estimates of tropospheric emissions burden, it modestly enhances monthly mean 8-h ozone (up to 1–2 ppbv or 3–4% but causes large increases (up to 13 ppbv in isolated episodes. It also substantially reduce the mean total nitrate by up to 0.8–2.0 μg m−3 or 11–21%. Modeled ClNO2 accounts for up to 3–4% of the monthly mean total reactive nitrogen. Sensitivity results of the model suggest that ClNO2 formation is limited more by the presence of particulate chloride than by the abundance of N2O5.

  13. Microreactor Technology for On-Site Production of Methyl Chloride

    OpenAIRE

    Schmidt, S A.; Vajglová, Z. (Zuzana); Eränen, K.; Murzin, D.Y.; Salmi, T

    2014-01-01

    A reactor setup consisting of two stainless steel microreactors [gas-phase microreactor (GPMR)-mix from the Institut für Mikrotechnik Mainz (IMM)] coupled in series was used for production of methyl chloride by hydrochlorination of methanol. The catalyst was γ-alumina on microreactor platelets. The influence of temperature on the methanol conversion and methyl chloride selectivity was investigated. A maximum conversion of 97.6% and a selectivity of 98.8% were reached at 340°C, which is c...

  14. Inhibitory effects of beryllium chloride on rat liver microsomal enzymes.

    Science.gov (United States)

    Teixeira, C F; Yasaka, W J; Silva, L F; Oshiro, T T; Oga, S

    1990-04-30

    A single i.v. dose (0.1 mmol Be2+/kg) of beryllium chloride prolonged the duration of pentobarbital-induced sleep and zoxazolamine-induced paralysis, in rats. The effects are correlated with changes of the pharmacokinetic parameters and with the in vitro inhibition of both aliphatic and aromatic hydroxylation of pentobarbital and zoxazolamine. In vitro N-demethylation of meperidine and aminopyrine was partially inhibited while O-demethylation of quinidine was unaffected by liver microsomes of rats pretreated with beryllium salt. The findings give clues that beryllium chloride inhibits some forms of cytochrome P-450, especially those responsible for hydroxylation of substrates, like pentobarbital and zoxazolamine.

  15. Venous uptake of /sup 201/Tl as thallous chloride

    Energy Technology Data Exchange (ETDEWEB)

    Silberstein, E.B.; Thomas, S.R. (Cincinnati Univ., OH (USA). Coll. of Medicine); Robbins, P.J.; Fortman, D.L. (Office of Science and Technology, Cincinnati, OH (USA). Food and Drug Administration, Nuclear Medicine Lab.); Sill, P.

    1984-05-01

    Thallium-201, injected as thallous chloride, has been found to adhere to or be taken up by the vein into which it is injected, permitting images to be obtained of human veins up to 4 h following injection. A digoxin-insensitive rat vein model also retained /sup 201/Tl but for shorter periods of time. /sup 201/Tl uptake is independent of the solution into which it is introduced, whether 5% dextrose or 0.9% sodium chloride. This technique permits multiple delayed views of normal veins to be obtained but is of uncertain value in the evaluation of thrombophlebitis of the calf because of rather poor resolution and high cost.

  16. An experiment on multibubble sonoluminescence spectra in sodium chloride solution

    Institute of Scientific and Technical Information of China (English)

    CHEN Zhan; XU JunFeng; HUANG Wei; CHEN WeiZhong; MIAO GuoQing

    2008-01-01

    We investigated experimentally the spectra of MBSL in sodium chloride water solution with krypton as dissolved gas. We observed and compared the spectra of hydroxyl ion at 310 nm and that of sodium atom at 589 nm. It has been found that under the same experimental condition, the intensity of sodium atom spectra is obviously higher than that of the hydroxyl ion spectra, and is more sensitive to the experimental condition. The krypton content, the concentration of sodium chloride solution, and the driving sound pressure obviously affect the spectra intensity in certain range.

  17. Stochastic Models for Chloride-Initiated Corrosion in Reinforced Concrete

    DEFF Research Database (Denmark)

    Engelund, Svend; Sørensen, John Dalsgaard

    Corrosion of the reinforcement in concrete structures can lead to a substantial decrease of the load-bearing capacity. One mode of corrosion initiation is when the chloride content around the reinforcement exceeds a threshold value. In the present paper a statistical model is developed by which...... the chloride content in a 1reinforced concrete structure can be predicted. The model parameters are estimated on the basis of measurements. The distribution of the time to initiation of corrosion is estimated by FORMISORM-analysis....

  18. Stochastic Models for Chloride-Initiated Corrosion in Reinforced Concrete

    DEFF Research Database (Denmark)

    Engelund, S.; Sørensen, John Dalsgaard

    1996-01-01

    Corrosion of the reinforcement in concrete structures can lead to a substantial decrease of the load-bearing capacity. One mode of corrosion initiation is when the chloride content around the reinforcement exceeds a threshold value. In the present paper a statistical model is developed by which...... the chloride content in a reinforced concrete structure can be predicted. The model parameters are estimated on the basis of measurements. The distribution of the time to initiation of corrosion is estimated by FORM/SORM-analysis....

  19. Chronic effects of mercuric chloride ingestion on rat adrenocortical function

    Energy Technology Data Exchange (ETDEWEB)

    Agrawal, R.; Chansouria, J.P.N. (Banaras Hindu Univ., Varanasi (India))

    1989-09-01

    Mercurial contamination of environment has increased. Mercury accumulates in various organs and adversely affects their functions. Some of the most prominent toxic effects of inorganic mercury compounds include neurotoxicity, hepatotoxicity and nephrotoxicity. Besides this, mercury has also been reported to affect various endocrine glands like pituitary, thyroid, gonadal and adrenal glands. There have been no reports on the toxic effects of chronic oral administration of varying doses of mercuric chloride on adrenocortical function in albino rats. The present work was undertaken to study the adrenocortical response to chronic oral administration of mercuric chloride of varying dose and duration in albino rats.

  20. Determination of the Optimum Conditions for Leaching of Zinc Cathode Melting Furnace Slag in Ammonium Chloride Media

    Science.gov (United States)

    Behnajady, Bahram; Babaeidehkordi, Amin; Moghaddam, Javad

    2014-04-01

    This research is part of a continuing effort to leach zinc from zinc cathode melting furnace slags (ZCMFSs) to produce zinc oxide. The slag with an assay of 68.05 pct Zn was used in ammonium chloride leaching for zinc extraction. In this paper, the effects of influential factors on extraction efficiency of Zn from a ZCMFS were investigated. The Taguchi's method based on orthogonal array (OA) design has been used to arrange the experimental runs in order to maximize zinc extraction from a slag. The softwares named Excel and Design-Expert 7 have been used to design experiments and subsequent analysis. OA L 25 (55) consisting of five parameters, each with five levels, was employed to evaluate the effects of reaction time ( t = 10, 30, 50, 70, 90 minutes), reaction temperature [ T = 313, 323, 333, 343, 353 (40, 50, 60, 70, 80) K (°C)], pulp density ( S/ L = 20, 40, 60, 80, 100 g/L), stirring speed ( R = 300, 400, 500, 600, 700 rpm), and ammonium chloride concentration ( C = 10, 15, 20, 25, 30 pctwt), on zinc extraction percent. Statistical analysis, ANOVA, was also employed to determine the relationship between experimental conditions and yield levels. The results showed that the significant parameters affecting leaching of slag were ammonium chloride concentration and pulp density, and increasing pulp density reduced leaching efficiency of zinc. However, increasing ammonium chloride concentration promoted the extraction of zinc. The optimum conditions for this study were found to be t 4: 70 minutes, T 5: 353 K (80 °C), ( S/ L)2: 40 g/L, R 3: 500 rpm, and C 4: 25 pctwt. Under these conditions, the dissolution percentage of Zn in ammonium chloride media was 94.61 pct.

  1. A chloride tolerant laccase from the plant pathogen ascomycete Botrytis aclada expressed at high levels in Pichia pastoris.

    Science.gov (United States)

    Kittl, Roman; Mueangtoom, Kitti; Gonaus, Christoph; Khazaneh, Shima Tahvilda; Sygmund, Christoph; Haltrich, Dietmar; Ludwig, Roland

    2012-01-20

    Fungal laccases from basidiomycetous fungi are thoroughly investigated in respect of catalytic mechanism and industrial applications, but the number of reported and well characterized ascomycetous laccases is much smaller although they exhibit interesting catalytic properties. We report on a highly chloride tolerant laccase produced by the plant pathogen ascomycete Botrytis aclada, which was recombinantly expressed in Pichia pastoris with an extremely high yield and purified to homogeneity. In a fed-batch fermentation, 495 mg L(-1) of laccase was measured in the medium, which is the highest concentration obtained for a laccase by a yeast expression system. The recombinant B. aclada laccase has a typical molecular mass of 61,565 Da for the amino acid chain. The pI is approximately 2.4, a very low value for a laccase. Glycosyl residues attached to the recombinant protein make up for approximately 27% of the total protein mass. B. aclada laccase exhibits very low K(M) values and high substrate turnover numbers for phenolic and non-phenolic substrates at acidic and near neutral pH. The enzyme's stability increases in the presence of chloride ions and, even more important, its substrate turnover is only weakly inhibited by chloride ions (I(50)=1.4M), which is in sharp contrast to most other described laccases. This high chloride tolerance is mandatory for some applications such as implantable biofuel cells and laccase catalyzed reactions, which suffer from the presence of chloride ions. The high expression yield permits fast and easy production for further basic and applied research. PMID:22178779

  2. Glucose & sodium chloride induced biofilm production & ica operon in clinical isolates of staphylococci

    Directory of Open Access Journals (Sweden)

    Astha Agarwal

    2013-01-01

    Full Text Available Background & objectives: All colonizing and invasive staphylococcal isolates may not produce biofilm but may turn biofilm producers in certain situations due to change in environmental factors. This study was done to test the hypothesis that non biofilm producing clinical staphylococci isolates turn biofilm producers in presence of sodium chloride (isotonic and high concentration of glucose, irrespective of presence or absence of ica operon. Methods: Clinical isolates of 100 invasive, 50 colonizing and 50 commensal staphylococci were tested for biofilm production by microtiter plate method in different culture media (trypticase soy broth alone or supplemented with 0.9% NaCl/ 5 or 10% glucose. All isolates were tested for the presence of ica ADBC genes by PCR. Results: Biofilm production significantly increased in the presence of glucose and saline, most, when both glucose and saline were used together. All the ica positive staphylococcal isolates and some ica negative isolates turned biofilm producer in at least one of the tested culture conditions. Those remained biofilm negative in different culture conditions were all ica negative. Interpretation & conclusions: The present results showed that the use of glucose or NaCl or combination of both enhanced biofilm producing capacity of staphylococcal isolates irrespective of presence or absence of ica operon.

  3. An electrochemical method for accelerated testing of chloride diffusivity in concrete

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, T.; Gjoerv, O.E. (Norwegian Inst. of Tech., Trondheim (Norway). Div. of Building Materials)

    1994-01-01

    In the present paper an electrochemical method for accelerated testing of chloride diffusivity in concrete is presented. The method is based on a theoretical relationship between chloride diffusivity and observed steady-state rate of chloride migration through the concrete. The concentration of the chloride source solution has a significant influence on the rate of chloride migration and, therefore, a correction factor for ionic interaction in the relationship is introduced. It is shown that the relationship can be used for calculation of chloride diffusivity under various testing conditions. Some experimental results are also presented.

  4. The Effect of Silver Chloride Formation on the Kinetics of Silver Dissolution in Chloride Solution

    Science.gov (United States)

    Ha, Hung; Payer, Joe

    2011-01-01

    The precipitation and growth of AgCl on silver in physiological NaCl solution were investigated. AgCl was found to form at bottom of scratches on the surface which may be the less effective sites for diffusion or the favorable sites for heterogeneous nucleation. Patches of silver chloride expanded laterally on the substrate until a continuous film formed. The ionic transport path through this newly formed continuous film was via spaces between AgCl patches. As the film grew, the spaces between AgCl patches closed and ion transport was primarily via micro-channels running through AgCl patches. The decrease of AgCl layer conductivity during film growth were attributed to the clogging of micro-channels or decrease in charge carrier concentration inside the micro-channels. Under thin AgCl layer, i.e. on the order of a micrometer, the dissolution of silver substrate was under mixed activation-Ohmic control. Under thick AgCl layer, i.e. on the order of tens of micrometers, the dissolution of silver substrate was mediated by the Ohmic resistance of AgCl layer. PMID:21516171

  5. The Effect of Silver Chloride Formation on the Kinetics of Silver Dissolution in Chloride Solution.

    Science.gov (United States)

    Ha, Hung; Payer, Joe

    2011-02-28

    The precipitation and growth of AgCl on silver in physiological NaCl solution were investigated. AgCl was found to form at bottom of scratches on the surface which may be the less effective sites for diffusion or the favorable sites for heterogeneous nucleation. Patches of silver chloride expanded laterally on the substrate until a continuous film formed. The ionic transport path through this newly formed continuous film was via spaces between AgCl patches. As the film grew, the spaces between AgCl patches closed and ion transport was primarily via micro-channels running through AgCl patches. The decrease of AgCl layer conductivity during film growth were attributed to the clogging of micro-channels or decrease in charge carrier concentration inside the micro-channels. Under thin AgCl layer, i.e. on the order of a micrometer, the dissolution of silver substrate was under mixed activation-Ohmic control. Under thick AgCl layer, i.e. on the order of tens of micrometers, the dissolution of silver substrate was mediated by the Ohmic resistance of AgCl layer.

  6. Toxic effects of mercuric chloride, methylmercuric chloride, and Emisan 6 (an organic mercurial fungicide) on ovarian recrudescence in the catfish

    Energy Technology Data Exchange (ETDEWEB)

    Kirubagaran, R.; Joy, K.P.

    1988-12-01

    Mercurial toxicity in fishes has been focused mainly on tissue uptake and subcellular distribution, nephrotoxicity, development, hatching and survivability of young ones and teratology. Very few studies have been attempted to investigate Hg toxicity on gonadal activity of fishes throughout the breeding season. In a previous investigation the authors have studied the toxic effects of mercuric chloride (HgCl/sub 2/), methylmercuric chloride (CH/sub 3/HgCl) and emisan 6 (an alkoxyalkyl fungicide) on the survival and histology of the kidney of the catfish, Clarias batrachus. The present report deals with toxic effects of these mercurials on ovarian recrudescence in the catfish, an economically important species in the subcontinent.

  7. [Evaluation of professional exposure to chloride vinyl monomer and vinyl idene chloride for a pharmaceutical packaging worker].

    Science.gov (United States)

    Dorsi, F; De Grandis, D; Laurelli, R; Narda, R; Pietrantonio, E; Scarlini, E; Soldati, P S

    2007-01-01

    The study was conducted by Judicial Policy investigations of Prosecution's Office. The event was connected by a professional founded suspicion disease of a pharmaceutical worker. First information coming from the Authority indicated a chloride vinyl monomer (CVM) exposure. We applied a chemical risk assessment method to estimate real professional exposure. The method was based on the productive cycle, physical and chemical and toxicological properties. The method combined to environmental data permitted to formulate etiological hypothesis. The worker during drugs packaging was exposed to CVM and vinylidene chloride (CVDM) caused by blister warming and by glue deposition. We explain the evaluations by which we could consider the pollutant different distribution in workplaces.

  8. Maintenance Planning for Chloride Initiated Corrosion in Concrete Structures

    DEFF Research Database (Denmark)

    Engelund, S.; Sørensen, John Dalsgaard

    1998-01-01

    Corrosion of the reinforcement in concrete structures can be initiated when the chloride concentration around the reinforcement exceeds a threshold value. In order to prevent the corrosion from reaching a stage where the load-bearing capacity of a given structure suffers a substantial decrease...

  9. Reaction of uranium dioxide with copper-containing chloride melts

    International Nuclear Information System (INIS)

    Cermet composition materials consisting of metallic copper and uranium dioxide can be used for manufacturing fuel rods of nuclear power reactors. Reprocessing of such irradiated fuel of dispersive type can be done employing non-aqueous pyrochemical methods and developing such technology requires information on interaction of uranium dioxide with chloride melts containing copper ions

  10. Comment on "Local impermeant anions establish the neuronal chloride concentration".

    Science.gov (United States)

    Voipio, Juha; Boron, Walter F; Jones, Stephen W; Hopfer, Ulrich; Payne, John A; Kaila, Kai

    2014-09-01

    Glykys et al. (Reports, 7 February 2014, p. 670) conclude that, rather than ion transporters, "local impermeant anions establish the neuronal chloride concentration" and thereby determine "the magnitude and direction of GABAAR currents at individual synapses." If this were possible, perpetual ion-motion machines could be constructed. The authors' conclusions conflict with basic thermodynamic principles.

  11. 4-(1H-Tetrazol-5-ylpyridinium chloride

    Directory of Open Access Journals (Sweden)

    Yan-Wei Zhang

    2010-12-01

    Full Text Available In the cation of the title compound, C6H6N5+·Cl−, the tetrazole and pyridine rings are nearly coplanar, making a dihedral angle of 5.58 (11°. The organic cations are linked to the chloride anions via N—H...Cl hydrogen bonds, forming chains along [110].

  12. Prenatal Mercuric Chloride Exposure Causes Developmental Deficits in Rat Cortex

    Directory of Open Access Journals (Sweden)

    Tayebeh Rastegar

    2011-09-01

    Full Text Available Introduction: Environmental pollution with heavy metals such as mercury is a major health problem. Growing studies on the field have shown the deleterious effects of mercury on human and nonhuman nervous system, especially in infants, however the effects of prenatal exposure to mercuricchloride on cortical development are not yet well understood. The aim of this study was to investigate the effect of prenatal exposure to mercuric chloride on morphological characteristics of brain cortex. Methods: Mercuric chloride (2 mg/kg or normal saline were injected (I.P. to 36 Sprague – dawley rats in the 8th, 9th or 10th day of gestation. The embryos were surgically removed in the 15th day of gestation, and brain cortices were studied by histological techniques. Results: Histological studies showed that embryos of mercuric chloride treated rats hadcortical neuronal disarrangement withdifferent orientations of nuclei, increased diameter of cortex, increased mitosis of cells, increased cell death, decreased cellular density and increased intracellular space. Conclusion: These findings suggest some micro structural abnormalities in cortical regions after prenatal exposure to mercuric chloride. These structural abnormalities may underliesome neurologic disturbances following mercury intoxication.

  13. Photonic crystal fiber based chloride chemical sensors for corrosion monitoring

    Science.gov (United States)

    Wei, Heming; Tao, Chuanyi; Krishnaswamy, Sridhar

    2016-04-01

    Corrosion of steel is one of the most important durability issues in reinforced concrete (RC) structures because aggressive ions such as chloride ions permeate concrete and corrode steel, consequently accelerating the destruction of structures, especially in marine environments. There are many practical methods for corrosion monitoring in RC structures, mostly focusing on electrochemical-based sensors for monitoring the chloride ion which is thought as one of the most important factors resulting in steel corrosion. In this work, we report a fiber-optic chloride chemical sensor based on long period gratings inscribed in a photonic crystal fiber (PCF) with a chloride sensitive thin film. Numerical simulation is performed to determine the characteristics and resonance spectral response versus the refractive indices of the analyte solution flowing through into the holes in the PCF. The effective refractive index of the cladding mode of the LPGs changes with variations of the analyte solution concentration, resulting in a shift of the resonance wavelength, hence providing the sensor signal. This fiber-optic chemical sensor has a fast response, is easy to prepare and is not susceptible to electromagnetic environment, and can therefore be of use for structural health monitoring of RC structures subjected to such aggressive environments.

  14. A chronopotentiometric approach for measuring chloride ion concentration

    NARCIS (Netherlands)

    Abbas, Yawar; Olthuis, Wouter; Berg, van den Albert

    2013-01-01

    In this paper, a novel approach is reported for the electrochemical measurement of chloride ions in aqueous solution. This sensor is based on the stimulus/response principle of chronopotentiometry. A current pulse is applied at the Ag/AgCl working electrode and the potential change is measured with

  15. Aqueous Chloride Operations Overview: Plutonium and Americium Purification/Recovery

    Energy Technology Data Exchange (ETDEWEB)

    Kimball, David Bryan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Skidmore, Bradley Evan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-06-22

    Acqueous Chloride mission is to recover plutonium and americium from pyrochemical residues (undesirable form for utilization and storage) and generate plutonium oxide and americium oxide. Plutonium oxide is recycled into Pu metal production flowsheet. It is suitable for storage. Americium oxide is a valuable product, sold through the DOE-OS isotope sales program.

  16. 21 CFR 862.1170 - Chloride test system.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Chloride test system. 862.1170 Section 862.1170 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES CLINICAL CHEMISTRY AND CLINICAL TOXICOLOGY DEVICES Clinical Chemistry Test Systems §...

  17. Preparation of pure uranyl chloride from crude yellow cake

    International Nuclear Information System (INIS)

    A process is described for the preparation of pure uranyl chloride solution from crude yellow cake. The process involves dissolution of the latter in hydrochloric acid followed by uranium extraction using TBP-kerosene mixture. A series of experiments were carried out in order to determine the optimum conditions for both the dissolution and the extraction steps

  18. Sulfation of Condensed Potassium Chloride by SO2

    DEFF Research Database (Denmark)

    Sengeløv, Louise With; Hansen, Troels Bruun; Bartolomé, Carmen;

    2013-01-01

    The interaction between alkali chloride and sulfur oxides has important implications for deposition and corrosion in combustion of biomass. In the present study, the sulfation of particulate KCl (90–125 μm) by SO2 was studied in a fixed bed reactor in the temperature range 673–1023 K and with rea...

  19. Study on the Reaction Mechanism of Naphthalene with Oxalyl Chloride

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The reaction of naphthalene with oxalyl chloride in the presence of anhydrous AlCl3 was investigated. The homolog of dinaphthyl methanone can be obtained mainly from this reaction. Naphthalene conversion does not have evident correlation with the amount of AlCl3. The results show that the reaction proceeds via carbon cation electrophilic substitution reaction-free radical substitution reaction pathway.

  20. Formaldoxime hydrogen bonded complexes with ammonia and hydrogen chloride

    Science.gov (United States)

    Golec, Barbara; Mucha, Małgorzata; Sałdyka, Magdalena; Barnes, Austin; Mielke, Zofia

    2015-02-01

    An infrared spectroscopic and MP2/6-311++G(2d,2p) study of hydrogen bonded complexes of formaldoxime with ammonia and hydrogen chloride trapped in solid argon matrices is reported. Both 1:1 and 1:2 complexes between formaldoxime and ammonia, hydrogen chloride have been identified in the CH2NOH/NH3/Ar, CH2NOH/HCl/Ar matrices, respectively, their structures were determined by comparison of the spectra with the results of calculations. In the 1:1 complexes present in the argon matrices the OH group of formaldoxime acts as a proton donor for ammonia and the nitrogen atom acts as a proton acceptor for hydrogen chloride. In the 1:2 complexes ammonia or hydrogen chloride dimers interact both with the OH group and the nitrogen atom of CH2NOH to form seven membered cyclic structures stabilized by three hydrogen bonds. The theoretical spectra generally agree well with the experimental ones, but they seriously underestimate the shift of the OH stretch for the 1:1 CH2NOH⋯NH3 complex.

  1. (tert-Butyl)(2-hydroxyethyl)ammonium chloride

    OpenAIRE

    Cintya Valerio-Cárdenas; Simón Hernández-Ortega; David Morales-Morales

    2014-01-01

    In the cation of the title molecular salt, C6H16NO+·Cl−, the N—C—C—O torsion angle is 176.5 (2)°. In the crystal, the cations and chloride ions are linked by N—H...O and O—H...O hydrogen bonds, generating a two-dimensional network parallel to (100).

  2. Using polyvinyl chloride dyed with bromocresol purple in radiation dosimetry.

    Science.gov (United States)

    Kattan, Munzer; al Kassiri, Haroun; Daher, Yarob

    2011-02-01

    Polyvinyl chloride (PVC) dyed with bromocresol purple was investigated as a high-dose radiation dosimeter. The absorbance at 417 nm depends linearly on the dose below 50 kGy. The response depends neither on dose rate nor on the irradiation temperature. The effects of post-irradiation storage in the dark and in indirect sunlight are also discussed.

  3. A mathematical model for electrochemical chloride removal from marine cast iron artifacts

    Institute of Scientific and Technical Information of China (English)

    Weizhen OUYANG; Xia CAO; Ning WANG

    2009-01-01

    The aim of this article was to theoretically study diffusion and migration of chlo-ride ions during electrochemical chloride removal. The proposed model would enable optimization of its application by predicting the optimal treatment time and current combination. A mathematical model for simulating the transport behavior of chloride ions was developed by consideration of diffusion and migration of chloride ions when a constant DC current density was applied through the marine cast iron artifacts. The corresponding tests were conducted to validate the mathematical model. This model predicted the data of the extraction ratio of the chloride ion that correlated satisfac-torily with the experimental values. An important issue in electrochemical chloride removal was to understand how chloride ions moved, taking account of diffusion and migration of chloride ions and the release of binding chloride ions. The effects of the treatment time, externally applied current density, chloride diffusion coefficient, and rate constant of release of binding chloride ion on chloride removal are studied. The specific quantitative details applied to one-dimensional model were discussed here. This article has proposed a mathematical model for the first time, which was showed to be a useful tool that can reveal the ionic transport mechanism and optimize the application during electrochemical chloride removal.

  4. A randomised crossover trial comparing a single-use polyvinyl chloride laryngeal mask airway with a single-use silicone laryngeal mask airway.

    Science.gov (United States)

    Bell, S F; Morris, N G; Rao, A; Wilkes, A R; Goodwin, N

    2012-12-01

    We compared insertion rates of single-use polyvinyl chloride laryngeal mask airways (LMAs) vs single-use silicone LMAs in 72 anaesthetised patients. Both airways were produced by Flexicare Medical. Laryngeal mask airway insertion was successful on the first attempt in 68/72 (94%) polyvinyl chloride LMAs vs 64/72 (89%) silicone LMAs (p = 0.39). Overall insertion rates were 72/72 (100%) for the polyvinyl chloride LMAs and 71/72 (99%) for the silicone LMAs (p = 1.0). Mean (SD) insertion times were similar for polyvinyl chloride and silicone LMAs: 24.3 (5.1)s vs 24.8 (7.8)s (p = 0.64). Laryngeal mask airway position, as assessed using a fibrescope, was not different (p = 0.077). The median (IQR [range]) leak pressure was 16 (12-20 [6-30]) cmH(2) O for the polyvinyl LMA and 18 (13-22 [6-30]) cmH(2) O or the silicone LMA (p = 0.037). In conclusion, we did not find any important differences between polyvinyl chloride and silicone laryngeal mask airways.

  5. Effects of Organic Corrosion Inhibitor and Chloride Ion Concentration on Steel Depassivation and Repassivation in Solution

    Institute of Scientific and Technical Information of China (English)

    WANG Zixiao; YU Lei; LIU Zhiyong; SONG Ning

    2015-01-01

    Effect of an organic corrosion inhibitor (OCI) named PCI-2014 added in chloride solution on the critical chlo-ride concentration of mild steel depassivation and the critical OCI concentrations for repairing the steel in different chlo-ride solution were investigated. The results show that the critical chloride concentration increases exponentially with raises of PCI-2014 concentration in the solution. Within a certain chloride ion concentration range, the critical PCI-2014 concentration for repairing the corroded steel is also increases exponentially with enhancement of chloride content in the solution. Atomic force microscopy images display the molecular particles of inhibitor are adsorbed on the steel surface and formed a protective layer. Analysis of X-ray photoelectron spectroscopy shows the chloride ions at the surface of steel are displaced by atoms or molecules of the inhibitor in chloride condition.

  6. Expanding Spectrum of Sodium Potassium Chloride Co-transporters in the Pathophysiology of Diseases.

    Science.gov (United States)

    Jaggi, Amteshwar Singh; Kaur, Aalamjeet; Bali, Anjana; Singh, Nirmal

    2015-01-01

    Sodium potassium chloride co-transporter (NKCC) belongs to cation-dependent chloride co-transporter family, whose activation allows the entry of Na(+), K(+) and 2Cl(-) inside the cell. It acts in concert with K(+) Cl(-) co-transporter (KCC), which extrudes K(+) and Cl(-) ions from cell. NKCC1 is widely distributed throughout the body, while NKCC2 is exclusively present in kidney. Protein kinase A, protein kinase C, Ste20-related proline-alanine-rich kinase, oxidative stress responsive kinases, With No K=lysine kinase and protein phosphatase type 1 control the phosphorylation/dephosphorylation of key threonine residues of in regulatory domain of NKCC1. The selective inhibitors of NKCC1 including bumetanide and furosemide are conventionally employed as diuretics. However, recent studies have indicated that NKCC1 may be involved in the pathophysiology of anxiety, cerebral ischemia, epilepsy, neuropathic pain, fragile X syndrome, autism and schizophrenia. The inhibitors of NKCC1 are shown to produce anxiolytic effects; attenuate cerebral ischemia-induced neuronal injury; produce antiepileptic effects and attenuate neuropathic pain. In the early developing brain, GABAA activation primarily produces excitatory actions due to high NKCC1/KCC2 ratio. However, as the development progresses, the ratio of NKCC1/KCC2 ratio reverses and there is switch in the polarity of GABAA actions and latter acquires the inhibitory actions. The recapitulation of developmental-like state during pathological state may be associated with increase in the expression and functioning of NKCC1, which decreases the strength of inhibitory GABAergic neurotransmission. The present review describes the expanding role and mechanism of NKCC1 in the pathophysiology of different diseases. PMID:26411965

  7. Size fractionation characterisation of removed organics in reverse osmosis concentrates by ferric chloride.

    Science.gov (United States)

    Bagastyo, A Y; Keller, J; Batstone, D J

    2011-01-01

    Reverse osmosis membrane separation is the leading method for manufacturing potable purified water. It also produces a concentrate stream, namely reverse osmosis concentrates (ROC), with 10-20% of the water, and almost all other compounds. One method for further treating this stream is by coagulation with ferric chloride. This study evaluates removed organics in ROC treated with ferric chloride. Fractionation with ultrafiltration membranes allows separation of organics based on a nominal molecular weight. A stirred cell system was applied for serial fractionation to classify organic compounds into six groups of 10 kDa. The study found that raw ROC is rich in low molecular weight compounds (organics. These compounds include soluble microbial products (SMPs) and smaller humic and fulvic acids as indicated by fluorescence scanning. Conversely, colour was mostly contributed by medium to large molecules of humic and fulvic acids (> 0.5 kDa). Organics and colour were reduced in all molecular groups at an optimum treatment dose 1.48 mM FeCl3 and a pH of 5. However, ferric seemed to effectively remove colour in all size ranges while residual nitrogen was found mostly in the < 1 kDa sizes. Further, the fluorescence indicated that larger humic and fulvic acids were removed with considerable SMPs remaining in the < 0.5 kDa.

  8. About effect of magnesium chloride and some ions in brines on boron coprecipitation by iron hydroxide

    International Nuclear Information System (INIS)

    Studies were made of conditions of precipitation of boron with iron hydroxide from the brines of the mixing zone of the Kara-Bogaz Gol, the mother liquor after the precipitation of potassium salts and artificial manganese chloride solutions at a temperature of 7-45 dee C. The maximum extraction of boron from the brines investigated is observed both in a weakly acid and a weakly alkaline medium. The extraction intensity increases drastically in the range of the maximum with an increase in brine concentration. The anions Cl-, SO42-, and HCO3- present in the brines produce the maximum effect on boron precipitation at a definite pH. This effect depends on the nature of the anions and their ratio in the brine. With a rise in temperature the degree of boron precipitations from the magnesium chloride brine and the precipitate capacity increase as a result of the release of active magnesium hydroxide. When the ratio of Fe2O3 to 100 ml initial solution changes towards increase in precipitating agent at a constant temperature, the precipitate capacity for B2O3 decreases

  9. Pyrolysis of poly(vinyl chloride) and-electric arc furnacedust mixtures.

    Science.gov (United States)

    Al-Harahsheh, Mohammad; Al-Otoom, Awni; Al-Makhadmah, Leema; Hamilton, Ian E; Kingman, Sam; Al-Asheh, Sameer; Hararah, Muhanned

    2015-12-15

    An investigation into the pyrolysis kinetics of PVC mixed with electric arc furnace dust (EAFD) was performed. Mixtures of both materials with varying PVC ratios (1:1, 1:2, 1:3) were prepared and pyrolyzed in a nitrogen atmosphere under dynamic heating conditions at different heating rates (5, 10, 30 and 50 °C/min). The pyrolysis process proceeded through two main decomposition steps; the first step involved the release of HCl which reacted with the metal oxides present in the dust, subsequently forming metal chlorides and water vapor. Benzene was also found to release as detected by TGA-MS. The remaining hydrocarbons in the polymer backbone decomposed further in the second step releasing further volatile hydrocarbons. Different models were used to fit the kinetic data namely the integral, the Van Krevelen, and Coats and Red fern methods. The presence of EAFD during PVC decomposition resulted in a considerable decrease in the activation energy of the reaction occurring during the first decomposition region. Furthermore, iron oxides were retained in the pyrolysis residue, whilst other valuable metals, including Zn and Pb, were converted to chlorides that are recoverable by leaching in water. It is believed that EAFD can be utilized as an active catalyst to produce energy gases such as propyneas evident from the TGA-MS. PMID:26183236

  10. Pyrolysis of poly(vinyl chloride) and-electric arc furnacedust mixtures.

    Science.gov (United States)

    Al-Harahsheh, Mohammad; Al-Otoom, Awni; Al-Makhadmah, Leema; Hamilton, Ian E; Kingman, Sam; Al-Asheh, Sameer; Hararah, Muhanned

    2015-12-15

    An investigation into the pyrolysis kinetics of PVC mixed with electric arc furnace dust (EAFD) was performed. Mixtures of both materials with varying PVC ratios (1:1, 1:2, 1:3) were prepared and pyrolyzed in a nitrogen atmosphere under dynamic heating conditions at different heating rates (5, 10, 30 and 50 °C/min). The pyrolysis process proceeded through two main decomposition steps; the first step involved the release of HCl which reacted with the metal oxides present in the dust, subsequently forming metal chlorides and water vapor. Benzene was also found to release as detected by TGA-MS. The remaining hydrocarbons in the polymer backbone decomposed further in the second step releasing further volatile hydrocarbons. Different models were used to fit the kinetic data namely the integral, the Van Krevelen, and Coats and Red fern methods. The presence of EAFD during PVC decomposition resulted in a considerable decrease in the activation energy of the reaction occurring during the first decomposition region. Furthermore, iron oxides were retained in the pyrolysis residue, whilst other valuable metals, including Zn and Pb, were converted to chlorides that are recoverable by leaching in water. It is believed that EAFD can be utilized as an active catalyst to produce energy gases such as propyneas evident from the TGA-MS.

  11. The Limiting Phenomena at the Anode of the Electrowinning of Zinc from Zinc Chloride in a Molten Chloride Electrolyte

    NARCIS (Netherlands)

    Lans, S.C.

    2004-01-01

    The objective of this research is to investigate the possibilities and technological viability for the electrowinning of zinc from zinc chloride. This research contributes to development of an alternative process, because it provides: ⢠A clear understanding and overview of the present zinc industr

  12. The chloride channel inhibitor NS3736 [corrected] prevents bone resorption in ovariectomized rats without changing bone formation

    DEFF Research Database (Denmark)

    Schaller, Sophie; Henriksen, Kim; Sveigaard, Christina;

    2004-01-01

    Chloride channel activity is essential for osteoclast function. Consequently, inhibition of the osteoclastic chloride channel should prevent bone resorption. Accordingly, we tested a chloride channel inhibitor on bone turnover and found that it inhibits bone resorption without affecting bone form...

  13. Mechanistic and kinetic analysis of the oxidative dehydrogenation of ethane via novel supported alkali chloride catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Gaertner, C.; Veen, A.C. van; Lercher, J.A. [Technische Universitaet Muenchen (Germany). Catalysis Research Center

    2013-11-01

    The oxidative dehydrogenation of ethane over advanced catalysts is promising to selectively produce ethylene, an essential building block for the chemical industry. In this way, ethane from shale gas can be efficiently valorized. Supported alkali chloride catalysts are investigated in this work. Essential feature of those materials is the presence of a solid core (magnesium oxide in part doped with Dy{sub 2}O{sub 3}) covered under reaction conditions with a molten alkali chloride shell. It is shown that especially the lowered melting point of eutectic mixtures of LiCl with other alkali/alkaline earth metals is the key to taylor highly efficient materials. Elucidating the ODH reaction mechanism is essential to understand the reactivity of this novel catalyst class and provides the basis for improving performances. Information about elementary steps and the rate determining step were extracted from kinetic measurements, both in steady state and in transient configuration. Furthermore, isotopic labelling studies were performed, i.e. SSITKA studies and temperature programmed isotopic exchange experiments. Step experiments showed a significant oxygen uptake by the catalysts. Retained oxygen reacted quantitatively with ethane at nearly 100% selectivity to ethylene and conversion rates were comparable with rates observed during steady state operation. Thus, chemically bound oxygen in the melt is the active and selective intermediate in the ODH. Therefore, it is required to consider an intermediate and the activation is concluded to relate to the oxygen dissociation. The total concentration of stored oxygen can be correlated to the steady-state activity, while the viscosity of the melts mainly influences the selectivity towards ethene. Properties of the solid core impact on the catalyst efficiency suggesting that the oxygen species forms at the interface between support and overlayer. The quantity of retained oxygen additionally depends on the properties of the chloride

  14. Acoustic and mechanical properties of recycled polyvinyl chloride/ground tyre rubber composites

    OpenAIRE

    Colom Fajula, Xavier; Cañavate Ávila, Francisco Javier; Carrillo Navarrete, Fernando; Lis Arias, Manuel José

    2013-01-01

    In order to provide another way of reducing the stock of used tyres and polyvinyl chloride waste, a new material is developed and studied. Formulation includes a matrix constituted by a compound of recycled polyvinyl chloride with plasticized polyvinyl chloride and a reinforcement of ground tyre rubber. Acoustic and mechanical properties of different compositions of polyvinyl chloride/ground tyre rubber were tested in order to determine their suitability for applications fulfilling industry r...

  15. Cytogenetic Effects of Copper Chloride on the Root Tip Cells of Helianthus annuus L.

    OpenAIRE

    İNCEER, Hüseyin; AYAZ, Sema; BEYAZOĞLU, Osman; ŞENTÜRK, Emine

    2003-01-01

    The cytogenetic effects of copper chloride on root tip cells of Helianthus annuus were investigated. Seeds were treated with 10, 25, 50 and 100 mg/L (ppm) of copper chloride for 24 h. It was found that copper chloride has a marked mitodepressive action on mitosis. Mitotic abnormalities were increased and the mitotic index was decreased depending on the concentration of the copper chloride applied.

  16. Electrical characterization of Calcium Aluminate (CA) in presence of chloride ions

    OpenAIRE

    Torres-Luque, Marcela; Osma, Johann F.; Sánchez-Silva, Mauricio; BASTIDAS-ARTEAGA, Emilio; Schoefs, Franck

    2015-01-01

    International audience Chloride ingress is one of the major causes of reinforced concrete degradation. Chlorides accelerate the breaking of the protective layer of rebars favoring pitting corrosion; furthermore, corrosion products generate cracks in concrete, which further accelerate chloride ingress, increase porosity and reduce the strength. From a chemical perspective, the presence of chlorides and its diffusion into the reinforced concrete matrix is highly influenced by the content and...

  17. The Influence of Mineral Functional Materials on Chloride Ion Penetration of Concrete

    Institute of Scientific and Technical Information of China (English)

    HU Hongmei; MA Baoguo

    2005-01-01

    The mechanism of chloride ion penetration in high performance concrete was analyzed. The experimental results indicate that there are two important reasons that influence the anti-chloride penetration of high performance concrete. One is the function effect of mineral functional material, so that it increases concrete's capability to resist chloride ion penetration. The other is combined action of mineral functional material's original capability of binding the chloride ion (physical adsorption) and physicochemical adsorption after hydration.

  18. ENHANCEMENT OF CHLORIDE RESISTANCE OF PRE-STRESSED CONCRETE SHEET PILE BY BLAST FURNACE SLAG

    OpenAIRE

    Irmawaty, Rita

    2012-01-01

    Chloride-induced corrosion is one of the main mechanisms of deterioration affecting the long-term performance of concrete structures. In Japan, a large majority of structures are built either near the costal or indirect contact with seawater. The durability of reinforced or pre-stressed concrete structure depends on the resistance of concrete to chloride penetration. Naturally concrete provides physical and chemical protection to the reinforcing steel from chloride penetrating. The chloride ...

  19. Boosting Farm Produce Supply

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    In the wake of escalating inflation,securing farm produce supply and stablizing grain prices could help to alleviate economic pressure The Chinese Government has pledged to secure a stable supply of farm produce.According to a document released after the annual Central Rural Work Conference held on December 22-23 in Beijing,preventing short supplies of farm produce and avoiding"ex-

  20. Expression and cellular localisation of chloride intracellular channel 3 in human placenta and fetal membranes

    NARCIS (Netherlands)

    Money, T. T.; King, R. G.; Wong, M.H.; Stevenson, J. L.; Kalionis, B.; Erwich, J. J. H. M.; Huisman, Marcel; Timmer, A.; Hiden, U.; Desoye, G.; Gude, N. M.

    2007-01-01

    Chloride channels regulate the movement of a major cellular anion and are involved in fundamental processes that are critical for cell viability. Regulation of intracellular chloride is achieved by multiple classes of channel proteins. One class of putative channels are the chloride intracellular ch

  1. 75 FR 36629 - Barium Chloride From the People's Republic of China: Continuation of Antidumping Duty Order

    Science.gov (United States)

    2010-06-28

    ... International Trade Administration Barium Chloride From the People's Republic of China: Continuation of... China: Final Results of Expedited Third Sunset Review of Antidumping Duty Order, 74 FR 55814 (October 29... Barium Chloride From China, 75 FR 33824 (June 15, 2010), and Barium Chloride from China (Inv. No....

  2. 46 CFR 154.1750 - Butadiene or vinyl chloride: Refrigeration system.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Butadiene or vinyl chloride: Refrigeration system. 154... and Operating Requirements § 154.1750 Butadiene or vinyl chloride: Refrigeration system. A refrigeration system for butadiene or vinyl chloride must not use vapor compression unless it: (a) Avoids...

  3. [Activity of Ca(2+)-dependent neutral proteinases in rat organs under cobalt and mercury chloride injection].

    Science.gov (United States)

    Kaliman, P A; Samokhin, A A; Samokhina, L M

    2003-01-01

    The activity of Ca(2+)-dependent neutral proteinases in rats under cobalt and mercury chloride injection was investigated. The calpains activity increase in the lungs, heart, liver and kidneys was revealed after 2 h cobalt chloride action. The mercury chloride gives a reliable increase of calcium-dependent neutral proteinases only in the kidneys. PMID:14574747

  4. 77 FR 22847 - National Emission Standards for Hazardous Air Pollutants for Polyvinyl Chloride and Copolymers...

    Science.gov (United States)

    2012-04-17

    ... Hazardous Air Pollutants for Polyvinyl Chloride and Copolymers Production; Final Rule #0;#0;Federal Register... Polyvinyl Chloride and Copolymers Production AGENCY: Environmental Protection Agency (EPA). ACTION: Final... Polyvinyl Chloride and Copolymers Production. The final rules establish emission standards that apply at...

  5. 76 FR 30604 - National Emission Standards for Hazardous Air Pollutants for Polyvinyl Chloride and Copolymers...

    Science.gov (United States)

    2011-05-26

    ... Polyvinyl Chloride and Copolymers Production AGENCY: Environmental Protection Agency (EPA). ACTION: Proposed..., the proposed rule, National Emission Standards for Hazardous Air Pollutants for Polyvinyl Chloride and... Polyvinyl Chloride and Copolymers Production, under Docket ID No. EPA-HQ-OAR-2002-0037 (available at...

  6. 76 FR 42613 - National Emission Standards for Hazardous Air Pollutants for Polyvinyl Chloride and Copolymers...

    Science.gov (United States)

    2011-07-19

    ... Polyvinyl Chloride and Copolymers Production; Extension of Comment Period AGENCY: Environmental Protection... for Hazardous Air Pollutants for Polyvinyl Chloride and Copolymers Production is being extended for 14... extend the public comment period for the May 20, 2011, Proposed Polyvinyl Chloride and...

  7. 76 FR 29527 - National Emission Standards for Hazardous Air Pollutants for Polyvinyl Chloride and Copolymers...

    Science.gov (United States)

    2011-05-20

    ... Hazardous Air Pollutants for Polyvinyl Chloride and Copolymers Production; Proposed Rule #0;#0;Federal.... SUMMARY: EPA is proposing National Emission Standards for Hazardous Air Pollutants for Polyvinyl Chloride... pollutants from polyvinyl chloride and copolymers production located at major and area sources. The...

  8. Enthalpic interactions of N-glycylglycine with xylitol in aqueous sodium chloride and potassium chloride solutions at T = 298.15 K

    International Nuclear Information System (INIS)

    The mixing enthalpies of N-glycylglycine with xylitol and their respective enthalpies of dilution in aqueous sodium chloride and potassium chloride solutions have been determined by using flow-mix isothermal microcalorimetry at the temperature of 298.15 K. These experimental results have been used to determine the heterotactic enthalpic interaction coefficients (hxy, hxxy, and hxyy) according to the McMillan-Mayer theory. It has been found that the heterotactic enthalpic pairwise interaction coefficients hxy between N-glycylglycine and xylitol in aqueous sodium chloride and potassium chloride solutions are negative and become less negative with an increase in the molality of sodium chloride or potassium chloride. The results are discussed in terms of solute-solute and solute-solvent interactions.

  9. Enthalpic interactions of N-glycylglycine with xylitol in aqueous sodium chloride and potassium chloride solutions at T = 298.15 K

    Energy Technology Data Exchange (ETDEWEB)

    Liu Min, E-mail: panpanliumin@163.co [College of Chemistry and Chemical Engineering, Liao Cheng University, Liaocheng, Shandong 252059 (China); Wang Lili [College of Chemistry and Chemical Engineering, Liao Cheng University, Liaocheng, Shandong 252059 (China); Zhu Lanying [College of Life Science and Bioengineering, Liao Cheng University, Liaocheng, Shandong 252059 (China); Li Hui; Sun Dezhi; Di Youying; Li Linwei [College of Chemistry and Chemical Engineering, Liao Cheng University, Liaocheng, Shandong 252059 (China)

    2010-07-15

    The mixing enthalpies of N-glycylglycine with xylitol and their respective enthalpies of dilution in aqueous sodium chloride and potassium chloride solutions have been determined by using flow-mix isothermal microcalorimetry at the temperature of 298.15 K. These experimental results have been used to determine the heterotactic enthalpic interaction coefficients (h{sub xy}, h{sub xxy}, and h{sub xyy}) according to the McMillan-Mayer theory. It has been found that the heterotactic enthalpic pairwise interaction coefficients h{sub xy} between N-glycylglycine and xylitol in aqueous sodium chloride and potassium chloride solutions are negative and become less negative with an increase in the molality of sodium chloride or potassium chloride. The results are discussed in terms of solute-solute and solute-solvent interactions.

  10. Biologically produced sulfur

    NARCIS (Netherlands)

    Kleinjan, W.E.; Keizer, de A.; Janssen, A.J.H.

    2003-01-01

    Sulfur compound oxidizing bacteria produce sulfur as an intermediate in the oxidation of hydrogen sulfide to sulfate. Sulfur produced by these microorganisms can be stored in sulfur globules, located either inside or outside the cell. Excreted sulfur globules are colloidal particles which are stabil

  11. [Evaluating risk of health disorders in workers engaged into polyvinyl chloride, vinyl chloride and caustic soda production (according to data collected by polls)].

    Science.gov (United States)

    D'iakovich, O A

    2014-01-01

    The authors represent data of automated system for quantitative risk evaluation of main pathologic syndromes in workers engaged into polyvinyl chloride, vinyl chloride and caustic soda production. Vinyl chloride and mercury levels at the investigation time corresponded with MAC. Relationship was seen between value of arterial hypertension risk and duration of contact with both vinyl chloride and mercury. Risk values for functional disorders of liver, endocrine system and nervous system were in weak correlation with length of exposure to mercury at work. Workers exposed to mercury appeared to have lower self-estimation of health state and higher dissatisfaction with the work.

  12. Influence of chloride in mortar made of Portland cement types II, III, and V on the near-field microwave reflection properties

    Science.gov (United States)

    Hu, Cairong; Benally, Aaron D.; Case, Tobias; Zoughi, Reza; Kurtis, Kimberly

    2000-07-01

    Corrosion of steel rebar in reinforced concrete structures, can be induced by the presence of chloride in the structure. Corrosion of steel rebar is a problematic issue in the construction industry as it compromises the strength and integrity of the structure. Although techniques exist for chloride detection and its migration into a structure, they are destructive, time consuming and cannot be used for the interrogation of large surfaces. In this investigation three different portland cement types; namely, ASTM types II, III and V were used, and six cubic (8' X 8' X 8') mortar specimens were produced all with water-to-cement (w/c) ratio of 0.6 and sand-to-cement (s/c) ratio of 1.5. Tap water was used when producing three of these specimens (one of each cement type). For the other three specimens calcium chloride was added to the mixing tap water resulting in a salinity of 2.5%. These specimens were placed in a hydration room for one day and thereafter left it the room temperature with low humidity. The reflection properties of these specimens, using an open-ended rectangular waveguide probe, were monitored daily at 3 GHz (S-band) and 10 GHz (X-band). The results show the influence of cement type on the reflection coefficient as well as the influence of chloride on the curing process and setting time.

  13. INTERACTION OF POLYVINYLPYRROLIDONE WITH METAL CHLORIDE AQUEOUS SOLUTIONS

    Institute of Scientific and Technical Information of China (English)

    Mohammad Saleem Khan; Khaista Gul; Najeeb Ur Rehman

    2004-01-01

    Interactions of polyvinylpyrrolidone (PVP) with metal chlorides (MgCl2, CaCl2, KC1 and BaC12) have been investigated by viscometric and spectrophotometric techniques in aqueous solutions. Intrinsic viscosity [η] of (PVP) has shown a discontinuity with varying concentration of metal chlorides. The decreasing order of effectiveness of cation is K1+>Ca2+> Mg2+> Ba2+ for poly(vinylpyrrolidone) solution. Changes in the absorption spectra of the cosolutes were observed in the presence of PVP in the lower limit of the UV-visible region i.e. 200-210 nm. These changes were attributed to interaction of PVP molecules with the cosolute molecules. As the concentration of the cosolute increased, a red shift in the peaks was observed, indicating an increase in interaction between PVP and cosolutes.

  14. Uranium (III) precipitation in molten chloride by wet argon sparging

    Science.gov (United States)

    Vigier, Jean-François; Laplace, Annabelle; Renard, Catherine; Miguirditchian, Manuel; Abraham, Francis

    2016-06-01

    In the context of pyrochemical processes for nuclear fuel treatment, the precipitation of uranium (III) in molten salt LiCl-CaCl2 (30-70 mol%) at 705 °C is studied. First, this molten chloride is characterized with the determination of the water dissociation constant. With a value of 10-4.0, the salt has oxoacid properties. Then, the uranium (III) precipitation using wet argon sparging is studied. The salt is prepared using UCl3 precursor. At the end of the precipitation, the salt is totally free of solubilized uranium. The main part is converted into UO2 powder but some uranium is lost during the process due to the volatility of uranium chloride. The main impurity of the resulting powder is calcium. The consequences of oxidative and reductive conditions on precipitation are studied. Finally, coprecipitation of uranium (III) and neodymium (III) is studied, showing a higher sensitivity of uranium (III) than neodymium (III) to precipitation.

  15. Electrowinning of lead powder from chloride leach liquor

    Energy Technology Data Exchange (ETDEWEB)

    Owais, Ashour [Suez Canal Univ., Suez (Egypt). Metallurgical and Materials Engineering Dept.

    2012-11-15

    Electrowinning of lead powder from chloride leach liquor obtained from secondary lead slag leached in hydrochloric acid is the main aim of this work. The resulted lead chloride solution (leachate) containing 2.2 wt.-% Pb and 1.24 wt.-% HCl was electrowon in an electrolytic cell containing one graphite plate as inert anode and two lead sheets as starting permanent cathodes. Different electrolysis parameters such as current density, electrolyte temperature and electrolyte stirring rate were studied. As indicated by SEM, EDX and XRD analyses, fine and pure (100 % Pb) powders with a dispersed and needle-like shape were formed with cathodic current efficiency up to 67.9 % and electrical energy demand ranges from 0.809 to 4.998 kWh/kg Pb with productivity up to 2.63 g/Ah. (orig.)

  16. Prediction of chloride ingress and binding in cement paste

    DEFF Research Database (Denmark)

    Geiker, Mette Rica; Nielsen, Erik Pram; Herforth, Duncan

    2007-01-01

    Finite Difference Model for the ingress of chlorides into concrete which takes into account its multi-component nature. The “composite theory” was then used to predict the diffusivity of each ion based on the phase assemblage present in the hydrated Portland cement paste. Agreement was found between...... in Portland cement pastes at any content of chloride, alkalis, sulfates and carbonate was verified experimentally and found to be equally valid when applied to other data in the literature. The thermodynamic model for predicting the phase equilibria in hydrated Portland cement was introduced into an existing...... profiles for the Cl/Ca ratio predicted by the model and those determined experimentally on 0.45 water/powder ratio Portland cement pastes exposed to 650 mM NaCl for 70 days. This confirms the assumption of essentially instantaneous binding where quasi-equilibrium is established locally. This does not imply...

  17. Sodium chloride's effect on self-assembly of diphenylalanine bilayer.

    Science.gov (United States)

    Kwon, Junpyo; Lee, Myeongsang; Na, Sungsoo

    2016-07-15

    Understanding self-assembling peptides becomes essential in nanotechnology, thereby providing a bottom-up method for fabrication of nanostructures. Diphenylalanine constitutes an outstanding building block that can be assembled into various nanostructures, including two-dimensional bilayers or nanotubes, exhibiting superb mechanical properties. It is known that the effect of the ions is critical in conformational and chemical interactions of bilayers or membranes. In this study, we analyzed the effect of sodium chloride on diphenylalanine bilayer using coarse-grained molecular dynamics simulations, and calculated the bending Young's modulus and the torsional modulus by applying normal modal analysis using an elastic network model. The results showed that sodium chloride dramatically increases the assembling efficiency and stability, thereby promising to allow the precise design and control of the fabrication process and properties of bio-inspired materials. © 2016 Wiley Periodicals, Inc. PMID:27241039

  18. Electrochemical synthesis and characterization of chloride doped polyaniline

    Indian Academy of Sciences (India)

    A M Pharhad Hussain; A Kumar

    2003-04-01

    Chloride doped polyaniline conducting polymer films have been prepared in a protic acid medium (HCl) by potentiodynamic method in an electrochemical cell and studied by cyclic voltammetry and FTIR techniques. The FTIR spectra confirmed Cl– ion doping in the polymers. The polymerization rate was found to increase with increasing concentration of aniline monomer. But the films obtained at high monomer concentration were rough having a nonuniform flaky polyaniline distribution. Results showed that the polymerization rate did not increase beyond a critical HCl concentration. Cyclic voltammetry suggested that, the oxidation-reduction current increased with an increase in scan rate and that the undoped polyaniline films were not hygroscopic whereas chloride doped polyaniline films were found to be highly hygroscopic.

  19. Swell activated chloride channel function in human neutrophils

    Energy Technology Data Exchange (ETDEWEB)

    Salmon, Michael D. [Leukocyte and Ion Channel Research Laboratory, School of Health and Biosciences, University of East London, Stratford Campus, London E15 4LZ (United Kingdom); Ahluwalia, Jatinder, E-mail: j.ahluwalia@uel.ac.uk [Leukocyte and Ion Channel Research Laboratory, School of Health and Biosciences, University of East London, Stratford Campus, London E15 4LZ (United Kingdom)

    2009-04-17

    Non-excitable cells such as neutrophil granulocytes are the archetypal inflammatory immune cell involved in critical functions of the innate immune system. The electron current generated (I{sub e}) by the neutrophil NADPH oxidase is electrogenic and rapidly depolarises the membrane potential. For continuous function of the NADPH oxidase, I{sub e} has to be balanced to preserve electroneutrality, if not; sufficient depolarisation would prevent electrons from leaving the cell and neutrophil function would be abrogated. Subsequently, the depolarisation generated by the neutrophil NADPH oxidase I{sub e} must be counteracted by ion transport. The finding that depolarisation required counter-ions to compensate electron transport was followed by the observation that chloride channels activated by swell can counteract the NADPH oxidase membrane depolarisation. In this mini review, we discuss the research findings that revealed the essential role of swell activated chloride channels in human neutrophil function.

  20. CPP-603 Chloride Removal System Decontamination and Decommissioning

    International Nuclear Information System (INIS)

    The CPP-603 (annex) Chloride Removal System (CRS) Decontamination and Decommissioning (D ampersand D) Project is described in this report. The CRS was used for removing Chloride ions and other contaminants that were suspended in the waters of the underwater fuel storage basins in the CPP-603 Fuel Receiving and Storage Facility (FRSF) from 1975 to 1981. The Environmental Checklist and related documents, facility characterization, decision analysis', and D ampersand D plans' were prepared in 1991. Physical D ampersand D activities were begun in mid summer of 1992 and were completed by the end of November 1992. All process equipment and electrical equipment were removed from the annex following accepted asbestos and radiological contamination removal practices. The D ampersand D activities were performed in a manner such that no radiological health or safety hazard to the public or to personnel at the Idaho National Engineering Laboratory (INEL) occurred

  1. Probabilistic Models and Computational Methods for Chloride Ingress in Concrete

    DEFF Research Database (Denmark)

    Engelund, S.

    Within the last decades it has been recognized that reinforced concrete structures are subject to a number of destructive mechanisms which might affect the structure in such a way that it is not able to fulfil its purpose efficiently. The present report focuses on chloride ingress and chloride......-initiated corrosion of the reinforcement, because experience has shown that in Denmark this is one of the most common destructive mechanisms. In order to ensure that a given reinforced concrete structure is able to fulfil its purpose extensive measurements are performed and on the basis of these measurements...... are costly, and careful planning is mandatory. The planning can be performed on the basis of classical decision theory (see e.g. Raiffa and Schlaifer). However, in order to use decision theory, it is necessary to formulate a probabilistic model of the considered problem....

  2. Near-unity quantum yields from chloride treated CdTe colloidal quantum dots.

    Science.gov (United States)

    Page, Robert C; Espinobarro-Velazquez, Daniel; Leontiadou, Marina A; Smith, Charles; Lewis, Edward A; Haigh, Sarah J; Li, Chen; Radtke, Hanna; Pengpad, Atip; Bondino, Federica; Magnano, Elena; Pis, Igor; Flavell, Wendy R; O'Brien, Paul; Binks, David J

    2015-04-01

    Colloidal quantum dots (CQDs) are promising materials for novel light sources and solar energy conversion. However, trap states associated with the CQD surface can produce non-radiative charge recombination that significantly reduces device performance. Here a facile post-synthetic treatment of CdTe CQDs is demonstrated that uses chloride ions to achieve near-complete suppression of surface trapping, resulting in an increase of photoluminescence (PL) quantum yield (QY) from ca. 5% to up to 97.2 ± 2.5%. The effect of the treatment is characterised by absorption and PL spectroscopy, PL decay, scanning transmission electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy. This process also dramatically improves the air-stability of the CQDs: before treatment the PL is largely quenched after 1 hour of air-exposure, whilst the treated samples showed a PL QY of nearly 50% after more than 12 hours.

  3. Chloride interference in the analysis of dissolved organic carbon by the wet oxidation method

    Science.gov (United States)

    Aiken, G.R.

    1992-01-01

    The presence of Cl- in concentrations greater than 0.02 M is shown to interfere with the analysis of aqueous DOC concentrations by the wet oxidation method of analysis when a reaction time of 5 min is employed. Chloride competes with DOC for S2O82-, lowering the overall oxidation efficiency. The resulting HOCl from the oxidation of Cl- reacts with DOC, producing significant amounts of chlorinated intermediate compounds in addition to CO2. These compounds were found in the waste effluent from the reaction chamber and in the gas stream transporting CO2 to the detector. While a possible Cl- effect has been noted for DOC measurements in the past, it has not previously been demonstrated to be a source of error at the concentrations reported in this paper. The interference can be overcome either by increasing the digestion time or by diluting samples to contain less than 0.02 M Cl-.

  4. Microfluidic Precolumn Derivatization of Environmental Phenols with Coumarin-6-Sulfonyl Chloride and HPLC Separation.

    Science.gov (United States)

    Suliman, FakhrEldin O; Al-Busaidi, Jihad N; Al-Lawati, Hiader A J; Al-Kindy, Salma M Z

    2015-09-01

    A simple, fast, sensitive and versatile method for the analysis of phenols in water is proposed using microfluidic precolumn derivatization with the fluorogenic label coumarin-6-sulfonyl chloride (C6SCl) and HPLC separation on monolithic columns. Phenols react with C6SCl within 3.0 min in the microreactor at ambient temperature to produce phenol-coumarin sulphonamides derivatives which were separated in reversed phase high-performance liquid chromatography followed by postcolumn ring-opening and fluorescence detection at λexc = 360 nm and λem = 460 nm. The optimum conditions for the derivatization, separation and ring-opening reaction have been established. The calibration curves were linear for the studied phenols in the range of 0.75-12.5 mg L(-1). The application of the method to environmental samples was demonstrated by analyzing tap and fountain water samples spiked with the phenolic compounds. PMID:25809998

  5. PROTECTIVE EFFECTS OF CALCIUM ANTAGONIST ON VASCULAR SYSTEM AGAINST TOXICITY INDUCED BY MERCURIC CHLORIDE

    Institute of Scientific and Technical Information of China (English)

    马欣; 厉英倩; 白宇飞; 刘明

    2004-01-01

    Objective To explore the toxic effects of mercuric chloride (HgCl2) on vascular smooth muscle as well as its relationship to calcium antagonist. Methods By using isolated vascular tension methods, we studied the effect of HgCl2 on isolated rabbit aortic rings. Results HgCl2 (1-100μmol*L-1) caused a concentration-dependent contraction of rabbit aortic rings, which did not change with phentolamin or without endothelium. In KH solution with Ca2+ , the maximum contraction amplitude reduced by(61.2±3.3)%. Nifedipine produced a concentration-dependent decrease of the maximum contraction amplitude. Conclusion Calcium antagonist has protective effects on vascular smooth muscle against damage induced by HgCl2.

  6. 7-(2,2-Dimethylpropanamido-2-methyl-1,8-naphthyridin-1-ium chloride monohydrate

    Directory of Open Access Journals (Sweden)

    Shyamaprosad Goswami

    2009-02-01

    Full Text Available The asymmetric unit of the title compound, C14H18N3O+·Cl−·H2O, comprises a substituted amido–naphthyridine cation, a chloride anion and a water molecule of crystallization. Intramolecular C—H...O hydrogen bonds generate six-membered rings, producing an S(6 ring motif. The amido group is twisted from the naphthyridine ring, making a dihedral angle of 17.65 (7°. The crystal structure is stabilized by intermolecular N—H...O, N—H...Cl, O—H...Cl (× 2, and C—H...O (× 2 hydrogen bonds. These interactions linked neighbouring molecules into chains along the a and b axes of the crystal, thus forming molecular sheets parallel to the (001 plane.

  7. Kinetics of structural rust transformation in environments containing chloride and SO2

    International Nuclear Information System (INIS)

    The behaviour of the rusts produced on low carbon steel exposed in industrial atmospheres, at different distances from the sea, was studied by simulating the wetting-drying cycle in a CEBELCOR type apparatus. Coupons electrode potential was monitored and rust layer was analyzed by gravimetric techniques, optical microscopy and Moessbauer spectroscopy. A particular chloride/sulfur ratio in the atmosphere was found, for which there is a particular behaviour in rust formation. For this ratio, corrosion rates were much less than expected. it is postulated a kinetic mechanism for rust layer formation as the origin of this special behavior. An electrode potential similar to that in a weathering steel was observed, this is reflected in the low corrosion rate obtained. The proposed kinetic mechanism for rust formation under these exposure conditions enables new research lines on layer formation and the development of protective rust for industrial marine atmospheres. (Author) 8 refs

  8. Model fire tests on polyphosphazene rubber and polyvinyl chloride (PVC)/nitrile rubber foams

    Science.gov (United States)

    Widenor, W. M.

    1978-01-01

    A video tape record of model room fire tests was shown, comparing polyphosphazene (P-N) rubber and polyvinyl chloride (PVC)/nitrile rubber closed-cell foams as interior finish thermal insulation under conditions directly translatable to an actual fire situation. Flashover did not occur with the P-N foam and only moderate amounts of low density smoke were formed, whereas with the PVC/nitrile foam, flashover occurred quickly and large volumes of high density smoke were emitted. The P-N foam was produced in a pilot plant under carefully controlled conditions. The PVC/nitrile foam was a commercial product. A major phase of the overall program involved fire tests on P-N open-cell foam cushioning.

  9. Highly reflective and adhesive surface of aluminized polyvinyl chloride film by vacuum evaporation

    Science.gov (United States)

    Li, Denian; Tai, Qile; Feng, Qiang; Li, Qi; Xu, Xizhe; Li, Hairong; Huang, Jing; Dong, Lijie; Xie, Haian; Xiong, Chuanxi

    2014-08-01

    Aluminized poly(vinyl chloride) (PVC) film with high reflectivity and strong adhesion was facilely fabricated by vacuum evaporation. The technical study revealed that both alkali-pretreatment of the PVC matrix and thermal annealing after aluminization could greatly promote the peeling adhesion force of this metal/polymer composite by producing interfacial active chemical groups and removing the inner stress, respectively. Reflectivity test and AFM study indicated that the reflecting capacitance of the aluminum coating was closely related to the surface roughness, which can be easily controlled by modulating deposition of aluminum. Moreover, the formation of aluminum layer follows an island model process, and a continuous and smooth coating with highest reflectivity and lowest surface resistance was achieved at deposition time of 60 s. We anticipate that the cost-effective metallized PVC film by this strategy may find extensive applications in light harvesting, solar energy, and flexible mirrors, among others.

  10. Study on Treatment of acidic and highly concentrated fluoride waste water using calcium oxide-calcium chloride

    Science.gov (United States)

    Ren, T.; Gao, X. R.; Zheng, T.; Wang, P.

    2016-08-01

    There are problems with treating acidic waste water containing high concentration fluorine by chemical precipitation, including the low sludge setting velocity and the high difficulty of reaching the criterion. In Heilongjiang province, a graphite factory producing high-purity graphite generates acidic waste water with a high concentration of fluorine. In this paper, the effect of removals on the concentration of fluoride with the combined treatment of calcium oxide and calcium chloride were discussed with regard to acid waste water. The study improved the sludge characteristics by using polyacrylamide (PAM) and polymeric aluminum chloride (PAC). The effect of different coagulants on sludge was evaluated by the sludge settlement ratio (SV), sludge volume index (SVI) and sludge moisture content. The results showed that the optimal combination for 100 ml waste water was calcium oxide addition amount of 14 g, a calcium chloride addition amount of 2.5 g, a PAM addition amount of 350 mg/L, and the effluent fluoride concentration was below 6 mg/L. PAM significantly improved the sludge settling velocity. The sludge settlement ratio reduced from 87.6% to 60%. The process for wastewater treatment was easily operated and involved low expenditure.

  11. Plants producing biofuels

    Energy Technology Data Exchange (ETDEWEB)

    Papavinasam, S. [Natural Resources Canada, Ottawa, ON (Canada). CANMET Materials Technology Lab

    2009-08-15

    Biofuels are currently produced primarily from five plants, namely corn, canola, sugar cane, palm oil, jatropha. However, research and development efforts are underway around the world produce biofuels from other sources, particularly from algae. This paper described the characteristics of the top 5 plants and their role in the production of biofuels. Countries where these plants are cultivated were also summarized. The article indicated that producing ethanol from corn, is not very efficient since growing corn requires more fertilizer and pesticides than most other crops, plus the corn kernels have to undergo energy-intensive distillation and chemical extraction processes. China is the world's largest producer of rapeseed oil, with an annual production of 12 million tons. The countries of the European Union collectively produce another 16 million tons, of which nearly 4 million tons were used in 2006 to produce biodiesel. Brazil is the world's largest producer of sugar cane, and accounts for about 45 per cent of global ethanol production. Malaysia and Indonesia are the key players in the palm oil market, accounting for 85 per cent of global production. India has identified more than 11 million hectares that would be suitable for growing jatropha, whose seeds contain up to 40 per cent oil that can be burned in a conventional diesel engine after extraction. 1 tab.

  12. Discoloration of Synthetic Dyeing Wastewater Using Polyaluminium Chloride

    OpenAIRE

    Bogoeva-Gaceva, Gordana; BUŽAROVSKA, Aleksandra; DIMZOSKI, Bojan

    2010-01-01

    The efficiency of polyaluminium chloride (PAC) in discoloration of synthetic dyeing wastewater composed of reactive or direct dye has been investigated, taking into account the proven advantages of PAC in water purification processes (compared to the conventional coagulants such as Al2(SO4)3, FeSO4, etc.). The efficiency of PAC was determined by UV/VIS spectroscopy, controlling the UV/VIS absorbance changes of the wastewater samples after their treatment with the appropriate amount of PAC. Co...

  13. Chloride transport through cementitious membranes using pulsed current

    OpenAIRE

    Diaz, B.; Novoa, X.Ramon; Puga, Beatriz; Vivier, Vincent

    2013-01-01

    International audience Microstructural changes and chloride transport in cement pastes are studied under DC current and pulsed electric fields. Impedance spectroscopy and ultrasonic pulse velocity measurements have been employed for quasi-real time monitoring of changes in the cement paste microstructure. The results show that the electric resistivity and ultrasound velocity (measured at 500 kHz) are modified during the migration experiments. At the end of test, mercury intrusion porosimet...

  14. Hibiscus sabdariffa Affects Ammonium Chloride-Induced Hyperammonemic Rats

    OpenAIRE

    Subramanian, P.; M. Mohamed Essa

    2007-01-01

    Hibiscus sabdariffa (HS) is an edible medicinal plant, indigenous to India, China and Thailand and is used in Ayurveda and traditional medicine. Alcoholic extract of HS leaves (HSEt) was studied for its anti-hyperammonemic and antioxidant effects in brain tissues of ammonium chloride-induced hyperammonemic rats. Oral administration of HSEt (250 mg kg−1 body weight) significantly normalizes the levels of ammonia, urea, uric acid, creatinine and non-protein nitrogen in the blood. HSEt significa...

  15. Influence of sodium chloride on wine yeast fermentation performance

    OpenAIRE

    Logothetis, Stelios

    2010-01-01

    Stilianos Logothetis1, Elias T Nerantzis2, Anna Gioulioti3, Tasos Kanelis2, Tataridis Panagiotis2, Graeme Walker11University of Abertay Dundee, School of Contemporary Sciences, Dundee, Scotland; 2TEI of Athens Department of Oenology and Spirit Technology, Biotechnology and Industrial Fermentations Lab Agiou Spiridonos, Athens, Greece; 3Ampeloiniki SA Industrial Park Thermi, Thessaloniki, GreeceAbstract: This paper concerns research into the influence of salt (sodium chloride) on growth, viabi...

  16. Synthesis and thermal behavior of polyacrylonitrile/vinylidene chloride copolymer

    OpenAIRE

    Robson Fleming; Luiz Claudio Pardini; Nilton Alves; Elson Garcia; Carlos Brito Júnior

    2014-01-01

    Polyacrylonitrile fiber encompasses a broad range of products based on acrylonitrile (AN) which is readily copolymerized with a wide range of ethylenic unsaturated monomers giving rise to polymers with different characteristics and applications. Such products can be designed for cost-effective, flame and heat resistant solutions for the textile industry, aircraft and automotive markets. In the present work acrylonitrile was copolymerized with vinylidene chloride (VDC) by conventional suspensi...

  17. Intergranular Corrosion of 2024 Alloy in Chloride Solutions

    OpenAIRE

    Augustin, Christel; Andrieu, Eric; Blanc, Christine; Mankowski, Georges; Delfosse, Jérôme

    2007-01-01

    Experiments were performed to determine the propagation kinetics of intergranular corrosion on 2024 aluminum alloy immersed in 1 and 3 M chloride solutions. Tests consisting of immersion in a corrosive solution followed by optical observations on sectioned samples were carried out. This method was found to be time consuming and led to a lack of reproducibility due to the random nature of the corrosion attacks. Another method proved to be more efficient; it consisted of measuring the load to f...

  18. A spontaneous, tonic chloride conductance in solitary glutamatergic hippocampal neurons

    OpenAIRE

    Eisenman, Lawrence N.; Kress, Geraldine; Charles F. Zorumski; Mennerick, Steven

    2006-01-01

    GABA-A receptors mediate both phasic synaptic inhibition and more recently appreciated tonic currents in the vertebrate central nervous system. We addressed discrepancies in the literature regarding the pharmacology of tonic currents by examining tonic currents in a controlled environment of dissociated, solitary glutamatergic neurons. We describe a novel tonically active, bicuculline-sensitive chloride conductance that is insensitive to gabazine and to picrotoxin and thus not mediated by con...

  19. Dynamic viscoelastic properties of polyvinyl chloride with physical aging

    Science.gov (United States)

    Tian, Fang; Luo, Yingshe; Yin, Shuiping; Wang, Hong; Cao, Chun

    2015-11-01

    The experimental research of dynamic viscoelastic properties of polyvinyl chloride was conducted by the dynamic mechanical analysis method in this paper. And the fitting equation of dynamic modulus of polymers has been presented. Based on the time-aging time equivalent principle, horizontal shift factor and vertical shift factor of aging time are carried out, which proposes a novel method for the research on time-aging time equivalent analysis of dynamic mechanical properties of polymers during physical aging.

  20. Comment on "Local impermeant anions establish the neuronal chloride concentration".

    Science.gov (United States)

    Luhmann, Heiko J; Kirischuk, Sergei; Kilb, Werner

    2014-09-01

    Glykys et al. (Reports, 7 February 2014, p. 670) proposed that cytoplasmic impermeant anions and polyanionic extracellular matrix glycoproteins establish the local neuronal intracellular chloride concentration, [Cl(-)]i, and thereby the polarity of γ-aminobutyric acid type A (GABAA) receptor signaling. The experimental procedures and results in this study are insufficient to support these conclusions. Contradictory results previously published by these authors and other laboratories are not referred to.

  1. Preparation of polymeric aluminium ferric chloride from bauxite tailings

    OpenAIRE

    Ma D; Guo M; Zhang M

    2013-01-01

    Bauxite tailings are the main solid wastes in the ore dressing process. The Al2O3 and Fe2O3 contents in bauxite tailings can reach 50% and 13% respectively. The present study proposed a feasible method to use bauxite tailings to prepare polymeric aluminium ferric chloride (PAFC), a new composite inorganic polymer for water purification. Bauxite tailings roasted reacting with hydrochloric acid under air, pickle liquor which mainly contains Fe3+, Al3+ was generated, then calcium aluminate...

  2. An insight into the passivation of cupronickel alloys in chloride environment

    Indian Academy of Sciences (India)

    J Mathiyarasu; N Palaniswamy; V S Muralidharan

    2001-02-01

    Cupronickels offer enhanced corrosion protection in marine environments by the formation of passive films on the surface. Cyclic voltammetric studies were carried on cupronickels in chloride solutions at H 6.3 to understand the role of chloride ions in passive film formation. Increase in nickel content of the alloy and of chloride ions in solution decreases film resistance. Chloride ions take part in reduction of the passive film to copper. A solid-state model for passive film formation involving chloride ions has been attempted.

  3. Properties of a conductive cellular chloride pathway in the skin of the toad (Bufo bufo)

    DEFF Research Database (Denmark)

    Larsen, Erik Hviid; Kristensen, P

    1978-01-01

    of the steady-state conductance and the steady-state chloride current reveal that the chloride pathway has maximum conductance for V approximately -80 mV (outside of the skin being negative) and approaches a non-conducting safe for V greater than 0 mV. This strong outward going rectification is a steady......-compartment model indicate that the strong steady-state chloride current rectification cannot be obtained if only the intracellular chloride concentration and the membrane potentials are allowed to vary ("Goldman-rectification"). It is suggested, therefore, that the premeability of the chloride pathway varies...

  4. Relationship between chloride diffusivity and pore structure of hardened cement paste

    Institute of Scientific and Technical Information of China (English)

    Guo-wen SUN; Wei SUN; Yun-sheng ZHANG; Zhi-yong LIU

    2011-01-01

    Based on effective media theory, a predictive model, relating chloride diffusivity to the capillary pores, gel pores,tortuosity factor, and pore size distribution of hardened cement, is proposed. To verify the proposed model, the diffusion coefficient of chloride ions, the degree of hydration, and peak radius of capillary pores of cement paste specimens were measured. The predicted results for chloride diffusivity were compared with published data. The results showed that the predicted chloride diffusivity of hardened cement paste was in good agreement with the experimental results. The effect of the evolution of pore structures in cement paste on chloride diffusivity could be deduced simultaneously using the proposed model.

  5. Enthalpy and entropy interaction parameters of sodium chloride with some monosaccharides in water

    Institute of Scientific and Technical Information of China (English)

    ZHUO; Kelei; WANG; Jianji; BAI; Guangyue; YAN; Haike; WANG

    2004-01-01

    Dilution enthalpies of sodium chloride and some monosaccharides (glucose, galactose, xylose, arabinose, and fructose) in water and mixing enthalpies of aqueous sodium chloride and these monosaccharide solutions were measured by using an improved precision semimicro-titration calorimeter. Transfer enthalpies of sodium chloride from water to aqueous saccharide solutions were evaluated as well as enthalpy interaction parameters of sodium chloride with these monosaccharides in water. Combined with Gibbs energy interaction parameters, entropy interaction parameters were also obtained. The results show that interactions of the saccharides with sodium chloride depend on the stereochemistry of saccharide molecules. These interaction parameters can identify stereochemical structure of saccharide molecules.

  6. METHOD OF PRODUCING NEUTRONS

    Science.gov (United States)

    Imhoff, D.H.; Harker, W.H.

    1964-01-14

    This patent relates to a method of producing neutrons in which there is produced a heated plasma containing heavy hydrogen isotope ions wherein heated ions are injected and confined in an elongated axially symmetric magnetic field having at least one magnetic field gradient region. In accordance with the method herein, the amplitude of the field and gradients are varied at an oscillatory periodic frequency to effect confinement by providing proper ratios of rotational to axial velocity components in the motion of said particles. The energetic neutrons may then be used as in a blanket zone containing a moderator and a source fissionable material to produce heat and thermal neutron fissionable materials. (AEC)

  7. Participation of GABAA Chloride Channels in the Anxiolytic-Like Effects of a Fatty Acid Mixture

    Directory of Open Access Journals (Sweden)

    Juan Francisco Rodríguez-Landa

    2013-01-01

    Full Text Available Human amniotic fluid and a mixture of eight fatty acids (FAT-M identified in this maternal fluid (C12:0, lauric acid, 0.9 μg%; C14:0, myristic acid, 6.9 μg%; C16:0, palmitic acid, 35.3 μg%; C16:1, palmitoleic acid, 16.4 μg%; C18:0, stearic acid, 8.5 μg%; C18:1cis, oleic acid, 18.4 μg%; C18:1trans, elaidic acid, 3.5 μg%; C18:2, linoleic acid, 10.1 μg% produce anxiolytic-like effects that are comparable to diazepam in Wistar rats, suggesting the involvement of γ-aminobutyric acid-A (GABAA receptors, a possibility not yet explored. Wistar rats were subjected to the defensive burying test, elevated plus maze, and open field test. In different groups, three GABAA receptor antagonists were administered 30 min before FAT-M administration, including the competitive GABA binding antagonist bicuculline (1 mg/kg, GABAA benzodiazepine antagonist flumazenil (5 mg/kg, and noncompetitive GABAA chloride channel antagonist picrotoxin (1 mg/kg. The FAT-M exerted anxiolytic-like effects in the defensive burying test and elevated plus maze, without affecting locomotor activity in the open field test. The GABAA antagonists alone did not produce significant changes in the behavioral tests. Picrotoxin but not bicuculline or flumazenil blocked the anxiolytic-like effect of the FAT-M. Based on the specific blocking action of picrotoxin on the effects of the FAT-M, we conclude that the FAT-M exerted its anxiolytic-like effects through GABAA receptor chloride channels.

  8. The effects of surface treatments on rapid chloride permeability tests

    KAUST Repository

    Yoon, Seyoon

    2012-08-01

    Surface treatments are commonly applied to improve the chloride resistance of concrete structures exposed to saline environments. Information on chloride ingress to surface-treated concrete is mostly provided by application of the rapid chloride permeability test (RCPT); this test is short in duration and provides rapid results. This study presents a numerical formulation, based on the extended Nernst-Plank/Poisson (NPP) equation, to model the effect of the surface treatment on a sample tested by RCPT. Predictions of the model are compared to experimental measurements. The simulations show that the results from RCPT, in terms of ionic profiles and measurement of the electric field, are dependent on the effectiveness of surface treatments. During RCPT, highly effective surface treatments cause both cations and anions to flocculate at the interface between the surface treatment and the concrete, creating a local electric field. Our numerical model includes these phenomena and presents a methodology to obtain more accurate diffusivities of the surface-treated- concrete from RCPT. © 2012 Elsevier B.V. All rights reserved.

  9. PCDD/F catalysis by metal chlorides and oxides.

    Science.gov (United States)

    Zhang, Mengmei; Yang, Jie; Buekens, Alfons; Olie, Kees; Li, Xiaodong

    2016-09-01

    Model fly ash (MFA) samples were composed of silica, sodium chloride, and activated carbon, and doped with metal (0.1 wt% Cu, Cr, Ni, Zn and Cd) chloride or oxide. Each sample was de novo tested at 350 °C for 1 h, in a flow of gas (N2, N2 + 10% O2, +21% O2 or +10% H2) to investigate the effect of metal catalyst and gas composition on PCDD/F formation. Total PCDD/F yield rises rapidly with oxygen content, while the addition of hydrogen inhibits the formation and chlorination of PCDD/F. The amount of PCDD on average rises linearly with the oxygen concentration, while that of PCDF follows a reaction order of about 1/2; thus the PCDF to PCDD ratio drops when more oxygen becomes available. Some samples do not follow this trend. Chlorides are much more active than oxides, yet there are marked differences between individual metals. Principal component analysis (PCA) was applied to study the signatures from all samples, showing their unique specificity and diversity. Each catalyst shows a different signature within its individual homologue groups, demonstrating that these signatures are not thermodynamically controlled. Average congener patterns do not vary considerably with oxygen content changing from oxidising (air) to reducing (nitrogen, hydrogen). PMID:27341157

  10. Investigation of lithium-thionyl chloride battery safety hazards

    Science.gov (United States)

    Attia, A. I.; Gabriel, K. A.; Burns, R. P.

    1983-01-01

    In the ten years since the feasibility of a lithium-thionyl chloride cell was first recognized (1) remarkable progress has been made in hardware development. Cells as large as 16,000 Ah (2) and batteries of 10.8 MWh (3) have been demonstrated. In a low rate configuration, energy densities of 500 to 600 Wh/kg are easily achieved. Even in the absence of reported explosions, safety would be a concern for such a dense energetic package; the energy density of a lithium-thionyl chloride cell is approaching that of dynamite (924 Wh/kg). In fact explosions have occurred. In general the hazards associated with lithium-thionyl chloride batteries may be divided into four categories: Explosions as a result of an error in battery design. Very large cells were in prototype development prior to a full appreciation of the hazards of the system. It is possible that some of the remaining safety issues are related to cell design; Explosions as a result of external physical abuse such as cell incineration and puncture; Explosions due to short circuiting which could lead to thermal runaway reactions. These problems appear to have been solved by changes in the battery design (4); and Explosions due to abnormal electrical operation (i.e., charging (5) and overdischarging (6) and in partially or fully discharged cells on storage (7 and 8).

  11. Viscosity measurement of alkali chlorides with capillary viscometer

    International Nuclear Information System (INIS)

    Viscosities of molten alkali chlorides have been measured by means of newly designed capillary viscometer made of fused quartz as shown in Fig. 1 and combined with a special transparent electric furnace which can be inverted. The viscometer was of a suspended level type and designed so as to minimize the error associated with the measurement, e.g., the effect of surface tension. Reynolds number of the capillary was less than 100. The sample was introduced into the viscometer through the quartz filter and then sealed under vacuum. Cell constants of the viscometer were determined by using distilled water as a calibration liquid. Efflux times were measured by direct visual observation using a digital stopwatch, and showed excellent reproducibility. The viscometer in the present investigation proved to be very precise and the errors accompanied were considered to be less than 0.7%. Viscosities obtained are collected in Table 1 and Figs. 3-1 -- 3-5 together with the previous data. Whereas the viscosity did not necessarily show any regularity, the activation energy for viscous flow increased with increasing cation size in the series of molten alkali chlorides. On the basis of a hard sphere model, the sizes of the flow units were considered to be nearly equal to those of cation-anion pairs. The viscosity of each molten alkali chloride at melting temperature increased with an increasing ratio of the flow unit volume to the hole volume. (author)

  12. Crevice Corrosion of 321 Stainless Steel in Sodium Chloride Solutions

    International Nuclear Information System (INIS)

    Electrochemical techniques have been applied to study the crevice corrosion behaviour of stabilized 321 stainless steel in both 0.5, 1 and 2 M sodium chloride solutions at 25 and 80 degree . This type of stainless steel enjoys a good corrosion resistance especially in the heat affected zone (Haz) of welds. In this investigation the crevice corrosion of 321 stainless steel was studied in both bulk solution environments as well as in chloride solutions simulating those formed inside crevices. A metal-to-nonmetal crevice assembly, in which disc type specimens were faced to a PTFE crevice former, is used for bulk solution tests. Crevice-free specimens of solutions formed inside crevices (known as the critical crevice solutions, CCS). Cyclic potentiodynamic technique was used in evaluating the electrochemical corrosion performance of the alloy in bulk (0.5 and 1 M Nacl) environment. This revealed that both chloride ion concentration and temperature have a marked effect on the electrochemical parameters generally used for the evaluation of the crevice corrosion susceptibility. This included the corrosion potential. E corr. The passivity breakdown potential, Eb, and the protection potential, E p

  13. ClC-3 chloride channel in hippocampal neuronal apoptosis

    Institute of Scientific and Technical Information of China (English)

    Lijuan Xu; Shuling Zhang; Hongling Fan; Zhichao Zhong; Xi Li; Xiaoxiao Jin; Quanzhong Chang

    2013-01-01

    Over-production of nitric oxide is pathogenic for neuronal apoptosis around the ischemic area fol-lowing ischemic brain injury. In this study, an apoptotic model in rat hippocampal neurons was tablished by 0.5 mmol/L 3-morpholinosyndnomine (SIN-1), a nitric oxide donor. The models were then cultured with 0.1 mmol/L of 4,4’-di sothiocyanostilbene-2,2’-disulfonic acid (DIDS;the chloride channel blocker) for 18 hours. Neuronal survival was detected using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, and apoptosis was assayed by Hoechst 33342-labeled neuronal DNA fluorescence staining. Western blot analysis and immunoche-nescence staining were applied to determine the changes of activated caspase-3 and CIC-3 channel proteins. Real-time PCR was used to detect the mRNA expression of CIC-3. The results showed that SIN-1 reduced the neuronal survival rate, induced neuronal apoptosis, and promoted ClC-3 chloride channel protein and mRNA expression in the apoptotic neurons. DIDS reversed the effect of SIN-1. Our findings indicate that the increased activities of the ClC-3 chloride channel may be involved in hippocampal neuronal apoptosis induced by nitric oxide.

  14. Industrialization of New Process to Electrolysis Zinc from Zinc Chloride and Ammonia Complex%氯化锌氨络合物制锌新工艺的工业化实践

    Institute of Scientific and Technical Information of China (English)

    邓良勋; 吴保庆

    2011-01-01

    用氯化铵与含氧化锌原料反应生成氯化锌氨络合物,净化后电解制取阴极锌.介绍了该流程的原理及工业试生产的有关情况.%The zinc chloride and ammonia complex was produced by reacting ammonium chloride with zinc oxide containing raw materials, after purification which was used to produce cathode zinc via electrolysis process.The principles of this process and industrialization pilot production were introduced in detail.

  15. The chloride-channel blocker 9-anthracenecarboxylic acid reduces the nonlinear capacitance of prestin-associated charge movement.

    Science.gov (United States)

    Harasztosi, Csaba; Gummer, Anthony W

    2016-04-01

    The basis of the extraordinary sensitivity and frequency selectivity of the cochlea is a chloride-sensitive protein called prestin which can produce an electromechanical response and which resides in the basolateral plasma membrane of outer hair cells (OHCs). The compound 9-anthracenecarboxylic acid (9-AC), an inhibitor of chloride channels, has been found to reduce the electromechanical response of the cochlea and the OHC mechanical impedance. To elucidate these 9-AC effects, the functional electromechanical status of prestin was assayed by measuring the nonlinear capacitance of OHCs from the guinea-pig cochlea and of prestin-transfected human embryonic kidney 293 (HEK 293) cells. Extracellular application of 9-AC caused reversible, dose-dependent and chloride-sensitive reduction in OHC nonlinear charge transfer, Qmax . Prestin-transfected cells also showed reversible reduction in Qmax . For OHCs, intracellular 9-AC application as well as reduced intracellular pH had no detectable effect on the reduction in Qmax by extracellularly applied 9-AC. In the prestin-transfected cells, cytosolic application of 9-AC approximately halved the blocking efficacy of extracellularly applied 9-AC. OHC inside-out patches presented the whole-cell blocking characteristics. Disruption of the cytoskeleton by preventing actin polymerization with latrunculin A or by decoupling of spectrin from actin with diamide did not affect the 9-AC-evoked reduction in Qmax . We conclude that 9-AC acts on the electromechanical transducer principally by interaction with prestin rather than acting via the cytoskeleton, chloride channels or pH. The 9-AC block presents characteristics in common with salicylate, but is almost an order of magnitude faster. 9-AC provides a new tool for elucidating the molecular dynamics of prestin function. PMID:26869218

  16. Stress corrosion cracking of 13% Cr martensitic steels in sodium chloride solutions in the presence of thiosulphate

    International Nuclear Information System (INIS)

    The stress corrosion cracking (SCC) susceptibility of 13% Cr martensitic (UNS S42000) and supermartensitic (UNS S41125) steels in sodium chloride solutions in the presence of thiosulphate was evaluated by slow strain rate tests (SSRT). The tests were performed in 5% sodium chloride solutions buffered at pH 2.7, 3.5, 4.5 and 6.0 in the absence and presence of thiosulphate in a concentration range between 10-6 and 10-3 M, at 25 ± 0.1 C. The electrochemical behaviour of the two steels in the different solutions was determined by recording the anodic and cathodic polarisation curves. 13% Cr martensitic steel showed SCC in 5% sodium chloride solutions with pH ≤ 4.5 in the presence of 3 x 10-6 thiosulphate. Decreasing the chloride ion concentration from 50 to 10 g/l, the critical concentration of thiosulphate to provoke SCC susceptibility increased from 3 x 10-6 to 1 x 10-5 M. The resistance to SCC of the supermartensitic steel was higher than that of the martensitic steel. The critical concentration of thiosulphate to induce SCC on the supermartensitic steel were 1 x 10-5 M at pH 2.7 and 1 x 10-4 M at pH 3.5. At pH ≥ 4.5 the supermartensitic steel did not crack. The anodic and cathodic polarisation curves evidenced the influence of the thiosulphate on the corrosion and the activation effect on the steels. The SCC of the two steels was attributed to hydrogen embrittlement produced by sulphur and hydrogen sulphide formed by dismutation and reduction of thiosulphate. (orig.)

  17. Agricultural Producer Certificates

    Data.gov (United States)

    Montgomery County of Maryland — A Certified Agricultural Producer, or representative thereof, is an individual who wishes to sell regionally-grown products in the public right-of-way. A Certified...

  18. Methods for producing diterpenes

    DEFF Research Database (Denmark)

    2015-01-01

    The present invention discloses that by combining different di TPS enzymes of class I and class II different diterpenes may be produced including diterpenes not identified in nature. Surprisingly it is revealed that a di TPS enzyme of class I of one species may be combined with a di TPS enzyme...... of class II from a different species, resulting in a high diversity of diterpenes, which can be produced....

  19. Noradrenaline activates a calcium-activated chloride conductance and increases the voltage-dependent calcium current in cultured single cells of rat portal vein.

    Science.gov (United States)

    Pacaud, P; Loirand, G; Mironneau, C; Mironneau, J

    1989-05-01

    1. Membrane responses were recorded by a patch pipette technique in cultured cells isolated from rat portal vein. Using the whole-cell mode, pressure ejections of noradrenaline evoked depolarization (current clamp) and inward current (voltage clamp) at membrane potentials of -60 to -70 mV. The noradrenaline-induced response was reversibly blocked by prazosin indicating that the response was mediated by alpha 1-adrenoceptors. 2. The ionic mechanism of the noradrenaline-induced inward current was investigated in potassium-free caesium-containing solutions. Alteration of the chloride equilibrium potential produced similar changes in the reversal potential of the noradrenaline-induced current, indicating that noradrenaline opened chloride-selective channels. There was no evidence implicating sodium or calcium as the charge-carrying ion. 3. Caffeine applied in the bathing solution also induced a transient increase in chloride conductance but the noradrenaline-induced response was lost after application of caffeine. This is interpreted to mean that the increase in chloride conductance induced by noradrenaline and caffeine can occur as a consequence of a rise in intracellular calcium concentration depending on release of calcium from the same intracellular stores. 4. In the presence of caffeine, noradrenaline increased both the voltage-dependent calcium and chloride membrane conductances during application of repetitive depolarizing pulses. It is concluded that in isolated cells of the rat portal vein the depolarization in response to noradrenaline is mediated by an increase in chloride conductance depending on both the calcium release from intracellular stores and the increase of the voltage-dependent calcium current. PMID:2470458

  20. COMPARITIVE STUDY OF INTUBATING CONDITIONS OF SUXAMETHONIUM AND MIVACURIUM CHLORIDE AS INTUBATING AGENTS IN PAEDIATRIC PATIENTS POSTED FOR TONSILLECTOMIES

    Directory of Open Access Journals (Sweden)

    Vasantha Kumar

    2014-01-01

    Full Text Available BACKGROUND : Suxamethonium , a depolarizing muscle relaxant has remained the undisputed drug for aiding intubation and an ideal drug for securing the airway because of its capabilities to produce excellent intubating conditions with in 60 seconds & short duration of action but is contraindicated in certain clinical conditions because of its side effects. AIM : The present study was undertaken to compare the intubating conditions as well as duration of actions of Suxamethonium 1 mg kg - 1 and mivacurium chloride , a new benzylisoquinolium non - depolarizing muscle relaxant with relatively rapid onset and short duration of action , 0.25mg kg - 1 at 60 seconds. METHODS : After institutional approval and informed consent , 60 ASA I and II pediatric patients posted for elective tonsillectomies were grouped into 30 patients each. We compared the intubating conditions and duration of action of Suxamethonium 1 mg kg - 1 and mivacurium chloride0.25mg kg - 1 at 60 seconds. Cardiovascular responses and any side effects related to histamine release were also studied. Statistical analysis: Statistical tools used in present study are student‘t’ test and ‘chi squared’ test. RESULTS : In group I , the intubating conditions in all the 30 patients were excellent except in 1 patient.In group II , 18 out of 30 patients had excellent intubating conditions , 7 patients had good , 3 patients fair and 2 patients had poor intubating conditions. CONCLUSIONS : The present study concluded that Suxamethonium produces excellent intubating conditions in 100% and mivacurium produces good to excellent intubating conditions in 83% at 60 seconds. Mivacurium chloride can be employed when Suxamethonium is contraindicated but Suxamethonium remains superior to mivacurium

  1. Preparation and characterization of poly-(methacrylatoethyl trimethylammonium chloride-co-vinylbenzyl chloride-co-ethylene dimethacrylate monolith

    Directory of Open Access Journals (Sweden)

    Eko Malis

    2015-05-01

    Full Text Available A polymer monolithic column, poly-(methacrylatoethyltrimethylammonium chloride-co-vinylbenzyl chloride-co-ethylene dimethacrylate or poly-(MATE-co-VBC-co-EDMA was successfully prepared in the current study by one-step thermally initiated in situ polymerization, confined in a steel tubing of 0.5 mm i.d. and 1/16” o.d. The monoliths were prepared from methacrylatoethyltrimethylammonium chloride (MATE and vinylbenzyl chloride (VBC as monomer and ethylene dimethacrylate (EDMA as crosslinker using a binary porogen system of 1-propanol and 1,4-butanediol. The inner wall of steel tubing was pretreated with 3-methacryloxypropyl-trimethoxysilane (MAPS. In order to obtain monolith with adequate column efficiency and low flow resistance, some parameters such as total monomer concentration (%T and crosslinker concentration (%C were optimized. The morphology of this monolith was assessed by scanning electron microscopy (SEM. The properties of the monolithic column, such as permeability, binding capacity, and pore size distribution were also characterized in detail. From the results of the characterization of all monolith variation, monolith with %T 30 %C 50 and %T 35 %C 50 give the best characteristic. These monoliths have high permeability, adequate molecular recognition sites (represented with binding capacity value of over 20 mg/mL, and have over 80% flow through pores in their pore structure contribute to low flow resistance. The resulted monolithic columns have promising potential for dual mode liquid chromatography. MATE may contribute for anion-exchange while VBC may responsible for reversed-phase liquid chromatography.

  2. The Limiting Phenomena at the Anode of the Electrowinning of Zinc from Zinc Chloride in a Molten Chloride Electrolyte

    OpenAIRE

    Lans, S.C.

    2004-01-01

    The objective of this research is to investigate the possibilities and technological viability for the electrowinning of zinc from zinc chloride. This research contributes to development of an alternative process, because it provides: ⢠A clear understanding and overview of the present zinc industry and future developments. ⢠A thorough literature investigation, leading to: o Understanding the reasons to abandon the proposed process route previously used (molten salt electrowinning in parti...

  3. Separating refractory and non-refractory particulate chloride and estimating chloride depletion by aerosol mass spectrometry in a marine environment

    OpenAIRE

    I. Nuaaman; Li, S.-M.; K. L. Hayden; Onasch, T. B.; Massoli, P.; D. Sueper; Worsnop, D.R.; Bates, T. S.; Quinn, P. K; McLaren, R.

    2015-01-01

    Aerosol composition and concentration measurements along the coast of California were obtained using an Aerodyne high-resolution time-of-flight aerosol mass spectrometer (HR-AMS) onboard the research vessel Atlantis during the CalNex study in 2010. This paper focuses on the measurement of aerosol chloride using the HR-AMS that can be ambiguous in regions with significant quantities of sea salt aerosols. This ambiguity arises due to large differences in the sensitivity of the HR...

  4. A New Approach to C60-Containing Polyphosphazenes by Polymerization of Phosphonitrile Chloride Trimer in the Presence of C60

    Institute of Scientific and Technical Information of China (English)

    LI Zhen; ZENG Qi; ZHU Zhi-Chao; LI Qian-Qian; LI Zhong-An; QIN Jin-Gui

    2007-01-01

    A novel synthetic strategy was developed to prepare polyphosphazenes containing C60 moieties. Thus, the phosphonitrile chloride trimer underwent thermal ring-opening polymerization (ROP) in the presence of C60 molecules to yield the reactive macromolecular intermediate, C60-containing poly(dichlorophosphazene). And then, the other groups could be linked to the phosphazene backbone by nucleophilic substitution reaction of the chlorine atoms in this intermediate to produce a series of C60-containing polyphosphazene. The polymer exhibits good solubility in common organic solvents and is thermally stable.

  5. Textile Dye Removal from Wastewater Effluents Using Bioflocculants Produced by Indigenous Bacterial Isolates

    OpenAIRE

    Balakrishna Pillay; Ademola O Olaniran; Simphiwe P. Buthelezi

    2012-01-01

    Bioflocculant-producing bacteria were isolated from activated sludge of a wastewater treatment plant located in Durban, South Africa, and identified using standard biochemical tests as well as the analysis of their 16S rRNA gene sequences. The bioflocculants produced by these organisms were ethanol precipitated, purified using 2% (w/v) cetylpyridinium chloride solution and evaluated for removal of wastewater dyes under different pH, temperature and nutritional conditions. Bioflocculants from ...

  6. Acute Toxicity of Mercuric Chloride (HgCl2, Lead Chloride (PbCl2 and Zinc Sulfate (ZnSO4 on Silver Dollar Fish (Metynnis fasciatus

    Directory of Open Access Journals (Sweden)

    Ali Sadeghi

    2015-06-01

    Full Text Available Background: Since heavy metals can accumulate in the tissues of aquatic organisms, they can cause a range of hazardous effects which can become harmful to humans. The aim of this study was to investigate the acute effects of some heavy metals as potential dangerous substances by assessing the mortality effects of Mercuric Chloride (HgCl2, Lead Chloride (PbCl2 and Zinc Sulfate (ZnSO4 pollutants on a freshwater fish, silver dollar (Metynnis fasciatus. Methods: Fish samples were exposed to different concentrations of mercuric chloride (HgCl2, lead chloride (Pbcl2 and zinc sulfate (ZnSO4 for 96h and their cumulative mortality was calculated in 24h intervals. Results were analyzed by SPSS 16 to obtain number of cumulative mortality and lethal concentrations (LC10-99. Results: LC50-96h was 0.94±0.41ppm, 86.84±1.04ppm and 32.24±1.41ppm for mercuric chloride, lead chloride and zinc sulfate, respectively. So, mercury had the highest toxicity to silver dollar fish. Conclusion: Mercuric chloride and lead chloride has the lowest and highest rate of mortality among these tree metals on silver dollar fish; however, the mortality rate was increased with increasing concentrations of toxins with time.

  7. Chlorination of pyrene in soil components with sodium chloride under xenon irradiation

    International Nuclear Information System (INIS)

    It was previously reported that chlorinated pyrenes (1-chloropyrene and dichloropyrene) were produced from pyrene in soil under sunlight irradiation. It was suggested that pyrene reacted with chlorine ion under sunlight. In this work, the formation of chlorinated pyrenes is investigated on 9 metallic oxides as soil components with pyrene and sodium chloride under xenon lamp irradiation. The chlorinated pyrenes as the reaction products were extracted with benzene:ethanol (4:1), and analyzed by GC/MS (SIM). The chlorinated pyrenes were produced in high amounts on 5 metallic oxides [silicon dioxides (quartz, silicic anhydride and silica gel forms) and titanium dioxides (rutile and anatase forms)] and in small amounts in 3 sorts of metallic oxides (aluminium oxide, magnesium oxide and ferric oxide), whereas they were not produced on calcium oxide. It was found that the yields of chlorinated pyrenes depended on the amounts of pyrene and chlorine ions in metallic oxides. In silicon dioxides, the yields of chlorinated pyrenes increased as the irradiation time was extended. In the titanium dioxides, the yields of chlorinated pyrenes had a peak at 0.5 – 1 hours irradiation of xenon lamp, and decreased as the irradiation time elapsed. (author)

  8. Producing superhydrophobic roof tiles

    Science.gov (United States)

    Carrascosa, Luis A. M.; Facio, Dario S.; Mosquera, Maria J.

    2016-03-01

    Superhydrophobic materials can find promising applications in the field of building. However, their application has been very limited because the synthesis routes involve tedious processes, preventing large-scale application. A second drawback is related to their short-term life under outdoor conditions. A simple and low-cost synthesis route for producing superhydrophobic surfaces on building materials is developed and their effectiveness and their durability on clay roof tiles are evaluated. Specifically, an organic-inorganic hybrid gel containing silica nanoparticles is produced. The nanoparticles create a densely packed coating on the roof tile surface in which air is trapped. This roughness produces a Cassie-Baxter regime, promoting superhydrophobicity. A surfactant, n-octylamine, was also added to the starting sol to catalyze the sol-gel process and to coarsen the pore structure of the gel network, preventing cracking. The application of ultrasound obviates the need to use volatile organic compounds in the synthesis, thereby making a ‘green’ product. It was also demonstrated that a co-condensation process effective between the organic and inorganic species is crucial to obtain durable and effective coatings. After an aging test, high hydrophobicity was maintained and water absorption was completely prevented for the roof tile samples under study. However, a transition from a Cassie-Baxter to a Wenzel state regime was observed as a consequence of the increase in the distance between the roughness pitches produced by the aging of the coating.

  9. Top Hispanic Degree Producers

    Science.gov (United States)

    Diverse: Issues in Higher Education, 2012

    2012-01-01

    This article presents a list of the top 100 producers of associate, bachelor's and graduate degrees awarded to minority students based on research conducted by Dr. Victor M.H. Borden, professor of educational leadership and policy students at the Indiana University Bloomington. For the year 2012, the listings focus on Hispanic students. Data for…

  10. Container for respiring produce

    NARCIS (Netherlands)

    Krijgsman, J.; Stroeks, A.A.M.; Thoden Van Velzen, E.U.

    2009-01-01

    The present invention relates to the use of a packaging material in the construction of a container for respiring produce, wherein the packaging material consists of a polyether-ester block copolymer or a blend of polyether-ester block copolymers and which packaging material has all of the following

  11. Producing CD-ROMs.

    Science.gov (United States)

    Hyams, Peter, Ed.

    1992-01-01

    This issue presents 11 articles that address issues relating to the production of CD-ROMs. Highlights include current uses of CD-ROM; standards; steps involved in producing CD-ROMs, including data capture, conversion, and tagging, product design, and indexing; authoring; selecting indexing and retrieval software; costs; multimedia CD-ROMs; and…

  12. Tea-Producer

    Institute of Scientific and Technical Information of China (English)

    1997-01-01

    CHEN Shuiyue is a tea producer in Shengzhou, Zhejiang Province, the biggest tea production and export base in China. One day last September, accompanied by two staff members from the local women’s federation, I visited Chen Shuiyue’s holne. Traveling along a bumpy road, we arrived at Yingguiyan Village, in Chongren County,

  13. Detecting Airborne Mercury by Use of Palladium Chloride

    Science.gov (United States)

    Ryan, Margaret; Shevade, Abhijit; Kisor, Adam; Homer, Margie; Jewell, April; Manatt, Kenneth; Torres, Julia; Soler, Jessica; Taylor, Charles

    2009-01-01

    Palladium chloride films have been found to be useful as alternatives to the gold films heretofore used to detect airborne elemental mercury at concentrations of the order of parts per billion (ppb). Somewhat more specifically, when suitably prepared palladium chloride films are exposed to parts-per-billion or larger concentrations of airborne mercury, their electrical resistances change by amounts large enough to be easily measurable. Because airborne mercury adversely affects health, it is desirable to be able to detect it with high sensitivity, especially in enclosed environments in which there is a risk of leakage of mercury from lamps or other equipment. The detection of mercury by use of gold films involves the formation of gold/mercury amalgam. Gold films offer adequate sensitivity for detection of airborne mercury and could easily be integrated into an electronic-nose system designed to operate in the temperature range of 23 to 28 C. Unfortunately, in order to regenerate a gold-film mercury sensor, one must heat it to a temperature of 200 C for several minutes in clean flowing air. In preparation for an experiment to demonstrate the present sensor concept, palladium chloride was deposited from an aqueous solution onto sets of gold electrodes and sintered in air to form a film. Then while using the gold electrodes to measure the electrical resistance of the films, the films were exposed, at a temperature of 25 C, to humidified air containing mercury at various concentrations from 0 to 35 ppb (see figure). The results of this and other experiments have been interpreted as signifying that sensors of this type can detect mercury in room-temperature air at concentrations of at least 2.5 ppb and can readily be regenerated at temperatures <40 C.

  14. Chemistry and Spectroscopy of Frozen Chloride Salts on Icy Bodies

    Science.gov (United States)

    Johnson, Paul; Thomas, Elena C.; Hodyss, Robert; Vu, Tuan; Choukroun, Mathieu

    2016-10-01

    Currently, our understanding of the chemical composition of Europa's surface is our best means of inferring constraints on the subsurface ocean composition and its subsequent habitability. The bulk of our knowledge of Europa surface chemistry can be traced to near infrared spectra recorded by the Near Infrared Mapping Spectrometer on the Galileo spacecraft. However, the usefulness of this and other remote sensing data is limited by the availability of spectral libraries of candidate materials under relevant conditions (temperature, thermal/radiation history, etc.). Chloride salts are expected to exist on the surface of Europa, and other icy bodies, based on geochemical predictions of the ocean composition. In order to help improve our understanding of Europa's surface composition, we have conducted a study of frozen chloride-salt brines prepared under simulated Europa surface conditions (vacuum, temperature, and UV irradiation) using both near IR and Raman spectroscopies. Specifically, Raman spectroscopy was used to determine the hydration states of various chloride salts as a function of temperature. Near IR spectroscopy of identically prepared samples was used to provide reference reflectance spectra of the identified hydrated salts. Our results indicate that at temperatures ranging from 80 K to 233 K, hydrohalite is formed from the freezing of NaCl brines, while the freezing of KCl solutions does not form KCl hydrates. In addition, the freezing of MgCl2 solutions forms a stable hexahydrate, and the freezing of CaCl2 solutions forms a hexahydrate, a tetrahydrate, and a dihydrate. Dehydration of the salts was observed as temperatures were increased, leading to a succession of hydration states in the case of CaCl2.

  15. Modeling acid-gas generation from boiling chloride brines

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Guoxiang; Spycher, Nicolas; Sonnenthal, Eric; Steefel, Carl

    2009-11-16

    This study investigates the generation of HCl and other acid gases from boiling calcium chloride dominated waters at atmospheric pressure, primarily using numerical modeling. The main focus of this investigation relates to the long-term geologic disposal of nuclear waste at Yucca Mountain, Nevada, where pore waters around waste-emplacement tunnels are expected to undergo boiling and evaporative concentration as a result of the heat released by spent nuclear fuel. Processes that are modeled include boiling of highly concentrated solutions, gas transport, and gas condensation accompanied by the dissociation of acid gases, causing low-pH condensate. Simple calculations are first carried out to evaluate condensate pH as a function of HCl gas fugacity and condensed water fraction for a vapor equilibrated with saturated calcium chloride brine at 50-150 C and 1 bar. The distillation of a calcium-chloride-dominated brine is then simulated with a reactive transport model using a brine composition representative of partially evaporated calcium-rich pore waters at Yucca Mountain. Results show a significant increase in boiling temperature from evaporative concentration, as well as low pH in condensates, particularly for dynamic systems where partial condensation takes place, which result in enrichment of HCl in condensates. These results are in qualitative agreement with experimental data from other studies. The combination of reactive transport with multicomponent brine chemistry to study evaporation, boiling, and the potential for acid gas generation at the proposed Yucca Mountain repository is seen as an improvement relative to previously applied simpler batch evaporation models. This approach allows the evaluation of thermal, hydrological, and chemical (THC) processes in a coupled manner, and modeling of settings much more relevant to actual field conditions than the distillation experiment considered. The actual and modeled distillation experiments do not represent

  16. Modeling acid-gas generation from boiling chloride brines

    Directory of Open Access Journals (Sweden)

    Sonnenthal Eric

    2009-11-01

    Full Text Available Abstract Background This study investigates the generation of HCl and other acid gases from boiling calcium chloride dominated waters at atmospheric pressure, primarily using numerical modeling. The main focus of this investigation relates to the long-term geologic disposal of nuclear waste at Yucca Mountain, Nevada, where pore waters around waste-emplacement tunnels are expected to undergo boiling and evaporative concentration as a result of the heat released by spent nuclear fuel. Processes that are modeled include boiling of highly concentrated solutions, gas transport, and gas condensation accompanied by the dissociation of acid gases, causing low-pH condensate. Results Simple calculations are first carried out to evaluate condensate pH as a function of HCl gas fugacity and condensed water fraction for a vapor equilibrated with saturated calcium chloride brine at 50-150°C and 1 bar. The distillation of a calcium-chloride-dominated brine is then simulated with a reactive transport model using a brine composition representative of partially evaporated calcium-rich pore waters at Yucca Mountain. Results show a significant increase in boiling temperature from evaporative concentration, as well as low pH in condensates, particularly for dynamic systems where partial condensation takes place, which result in enrichment of HCl in condensates. These results are in qualitative agreement with experimental data from other studies. Conclusion The combination of reactive transport with multicomponent brine chemistry to study evaporation, boiling, and the potential for acid gas generation at the proposed Yucca Mountain repository is seen as an improvement relative to previously applied simpler batch evaporation models. This approach allows the evaluation of thermal, hydrological, and chemical (THC processes in a coupled manner, and modeling of settings much more relevant to actual field conditions than the distillation experiment considered. The actual

  17. 7 CFR 1250.305 - Egg producer or producer.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Egg producer or producer. 1250.305 Section 1250.305... Research and Promotion Order Definitions § 1250.305 Egg producer or producer. Egg producer or producer... laying hens is in some other party to the contract. In the event the party to an oral contract...

  18. Evaluation of Ag/AgCI sensors for in-situ monitoring of freee chloride concentration in reinforced concrete structures

    OpenAIRE

    Pargar, F.; Koleva, D.A.; Copuroglu, O.; Koenders, E.A.B.; Breugel, K. van

    2014-01-01

    The level of free chloride concentration in reinforced concrete structures essentially determines the onset of steel corrosion initiation and further propagation. One of the well-known methods for monitoring free chloride concentration is using silver/silver chloride electrodes (Ag/AgCl). These electrodes are sensitive mainly to chloride ions and establish a certain electrochemical potential depending on the chloride ion activity in the environment. Although the functioning principles of thes...

  19. Corrosion Inhibition of Carbon Steel in Chloride and Sulfate Solutions

    Directory of Open Access Journals (Sweden)

    Amr Ahmed Elsayed

    2016-02-01

    Full Text Available Corrosion is a major problem in industry and in infrastructure; a huge sum of expenditure every year is spent on preventing, retarding, and repairing its damages. This work studies the engineering of an inhibitor for carbon steel metal used in the cooling systems containing high concentration of chloride and sulfate ions. For this purpose, the synergy between the dichromate, molybdate and nitrite inhibitors is examined and optimized to the best results. Moreover, care was taken that the proposed inhibitor is compliant with the environmental laws and regulations.

  20. The Humidity Sensor Using the Polyacrylic Emulsion Containing Magnesium Chloride

    Institute of Scientific and Technical Information of China (English)

    Ching-Han Yu; Jung-Chuan Chou; Tai-Ping Sun; Shen-Kan Hsiung

    2006-01-01

    An impedance type humidity sensor based on the polyacrylic emulsion containing magnesium chloride (MgCl2)without chemical modification was investigated. The impedances of the sensor were measured from various relative humidity in the frequency range between 0.1kHz and 100 kHz. The sensor has a good sensitivity from 60%RH to 90%RH. According to the experimental results, the response time is about 240 seconds in the adsorption process and 310 seconds in the desorption process.

  1. Synthesis of brookite-typed titania from titanium chloride solution

    Institute of Scientific and Technical Information of China (English)

    Satoshi OKANO; Saeki YAMAMURO; Toshiro TANAKA

    2009-01-01

    The brookite-phase TiO2 was prepared by a hydrothermal synthesis of titanium chloride solution. The thermolysis time and the pH value of the solution were controlled during the synthesis. X-ray diffraction experiments showed that TiO2 powders partially containing the brookite-phase were successfully ob-tained. A great amount of OH in the reaction solution was found to be important to obtain the brookite phase because the intermediate complex leading to the brookite phase consumes more OH- than other phases like the rutile.

  2. Synthesis of brookite-typed titania from titanium chloride solution

    Institute of Scientific and Technical Information of China (English)

    Satoshi; OKANO; Saeki; YAMAMURO; Toshiro; TANAKA

    2009-01-01

    The brookite-phase TiO2 was prepared by a hydrothermal synthesis of titanium chloride solution. The thermolysis time and the pH value of the solution were controlled during the synthesis. X-ray diffraction experiments showed that TiO2 powders partially containing the brookite-phase were successfully obtained. A great amount of OH-in the reaction solution was found to be important to obtain the brookite phase because the intermediate complex leading to the brookite phase consumes more OH- than other phases like the rutile.

  3. Multireference Calculation of the Photodissociation of Benzyl Chloride

    Institute of Scientific and Technical Information of China (English)

    CAO Jun; LIU Ya-Jun; FANG Wei-Hai

    2007-01-01

    The photodissociation mechanism of benzyl chloride (BzCl) under 248 nm has been investigated by the complete active space SCF (CASSCF) method by calculating the geometries of the ground (S0) and lower excited states,the vertical (Tv) and adiabatic (T0) excitation energies of the lower states,and the dissociation reaction pathways on the potential energy surfaces (PES) of S1, T1 and T2 states.The calculated results clearly elucidated the photodissociation mechanism of BzCl,and indicated that the photodissociation on the PES of T1 state is the most favorable.

  4. Calorimetry of 25 Ah lithium/thionyl chloride cells

    Science.gov (United States)

    Johnson, C. J.; Dawson, S.

    1991-01-01

    Heat flow measurements of 25-Ah lithium thionyl chloride cells provided a method to calculate an effective thermal potential, E(TP) of 3.907 V. The calculation is useful to determine specific heat generation of this cell chemistry and design. The E(TP) value includes heat generation by electrochemical cell reactions, competitive chemical reactions, and resistance heating at the tabs, connectors, and leads. Heat flow was measured while applying electrical loads to the cell in an isothermal calorimeter set at 0, 20, and 60 C.

  5. 4-Hydroxy-1,2,6-trimethylpyridinium chloride monohydrate

    Directory of Open Access Journals (Sweden)

    T. Seethalakshmi

    2013-06-01

    Full Text Available In the crystal of the title hydrated molecular salt, C8H12NO+·Cl−·H2O, the water molecule makes two O—H...Cl hydrogen bonds, generating [010] zigzag chains of alternating water molecules and chloride ions. The cation is bonded to the chain by an O—H...O hydrogen bond and two weak C—H...Cl interactions. Weak aromatic π–π stacking [centroid–centroid separation = 3.5175 (15 Å] occurs between the chains.

  6. Sodium Chloride, NaCl/{\\epsilon} : New Force Field

    OpenAIRE

    Fuentes-Azcatl, Raul; Barbosa, Marcia C.

    2015-01-01

    A new computational model for Sodium Chloride, the NaCl/{\\epsilon}, is proposed. The Force Fields employed here for the description of the NaCl is based on a set of radial particle-particle pair potentials involving Lennard-Jones (LJ) and Coulombic forces. The parameterization is obtained fitting the density of the crystal and the density and the dielectric constant of the mixture of salt with water at diluted solution. Our model shows good agreement with the experimental values for the densi...

  7. Electrochemical Migration on Electronic Chip Resistors in Chloride Environments

    DEFF Research Database (Denmark)

    Minzari, Daniel; Jellesen, Morten Stendahl; Møller, Per;

    2009-01-01

    Electrochemical migration behavior of end terminals on ceramic chip resistors (CCRs) was studied using a novel experimental setup in varying sodium chloride concentrations from 0 to 1000 ppm. The chip resistor used for the investigation was 10-kΩ CCR size 0805 with end terminals made of 97Sn3Pb...... alloy. Anodic polarization behavior of the electrode materials was investigated using a microelectrochemical setup. Material makeup of the chip resistor was investigated using scanning electron microscopy (SEM)/energy dispersive spectroscopy and focused-ion-beam SEM. Results showed that the dissolution...

  8. THE INFLUENCE OF CALCIUM CHLORIDE UPON EXPERIMENTAL BOTULISM.

    Science.gov (United States)

    Hall, I C; Davis, N C

    1923-03-31

    1. Calcium chloride given subcutaneously, intraperitoneally, or intravenously has been found to have no effect upon the production of botulism following the injection of Bacillus botulinus (Strain 80B) into the peritoneal cavity of guinea pigs. 2. Treatment of Bacillus botulinus with alcohol has been found markedly to decrease its toxicity for guinea pigs. This is in conformity with the work of Bronfenbrenner and Schlesinger. 3. Toxin-free spores of Bacillus botulinus have been found pathogenic for guinea pigs. 4. No prejudice as to possible results in rabbits should be based upon the above conclusions.

  9. Antimicrobial activity of seven metallic compounds against penicillinase producing and non-penicillinase producing strains of Neisseria gonorrhoeae.

    OpenAIRE

    Peeters, M.; Vanden Berghe, D; Meheus, A.

    1986-01-01

    The in vitro activity of seven metallic compounds was tested against penicillinase (beta lactamase) producing strains of Neisseria gonorrhoeae (PPNG) and non-PPNG strains. On a weight basis, the mercurials showed the greatest in vitro activity. Phenylmercuric borate, thiomersal, and mercuric chloride inhibited 90% of all strains at concentrations of 5 mg/l, 5 mg/l, and 20 mg/l respectively. Silver nitrate inhibited 90% of the strains at 80 mg/l and the MIC90 for mild silver protein was 200 mg...

  10. Quality control methods of strontium chloride 89SrCl2, radiopharmaceutical for palliative treatment of bone metastases

    International Nuclear Information System (INIS)

    Strontium chloride, 89SrCI2, a radiopharmaceutical used for palliative therapy of bone metastases from breast and prostate cancer is produced by irradiation in a nuclear reactor. The analytical quality control procedures are established to confirm the radionuclidic purity of the preparation, its chemical composition and specific activity. Chemical concentration of strontium in the product is determined by complexometry with arsenazo III and chlorides assay by potentiometric titration with silver nitrate. The contamination with chemical impurities is determined by DC graphite spark spectrography. The specific activity and isotonicity of the solution are corrected by addition of natural SrCI2 and NaCI. 90Sr is produced in the 89Sr(n,γ)90Sr reaction contributes to impurities. It decays to 90Y and the activity of 90Sr can be calculated from the activity of 90Y. The extraction chromatography on nonionic acrylic ester polymer coated with organic solutions of selective features (Spec resins for Eichrom) is applied for separation of radionuclides. The extraction chromatography system consisting of two columns: strontium selective resin and rare earth elements selective resin was used for separation of 90Y from 90Sr in the 89SrCI2 solution. The 90Y and 90Sr carrier-free solutions used as tracers helped for determination of extraction conditions and efficiency. The concentration of 90Sr determined in the analysed solution is at the level of 2.10-4% which conforms with the data calculated from irradiation parameters. The obtained product, strontium chloride 89SrCI2 for injection, forms a sterile and isotonic water solution (pH - 4-7) with specific activity of 89Sr in the range from 3.5 to 6.3. MBq/mg and radioactive concentration of 37.5 MBq/ml. The radionuclidic purity of the obtained preparations is at the level of 99.9% with respect to 89Sr

  11. Beneficial effect of zinc chloride and zinc ionophore pyrithione on attenuated cardioprotective potential of preconditioning phenomenon in STZ-induced diabetic rat heart.

    Science.gov (United States)

    Jamwal, Sumit; Kumar, Kushal; Reddy, B V Krishna

    2016-05-01

    Ischemic preconditioning (IPC) is well demonstrated to produce cardioprotection by phosphorylation and subsequent inactivation of glycogen synthase kinase-3β (GSk-3β) in the normal rat heart, but its effect is attenuated in the diabetic rat heart. This study was designed to investigate the effect of zinc chloride and zinc ionophore pyrithione (ZIP) on the attenuated cardioprotective potential of IPC in the diabetic rat heart. Diabetes mellitus (DM) was induced by a single intraperitoneal administration of streptozotocin (STZ) (50 mg/kg; i.p). The isolated perfused rat heart was subjected to 30 minutes of ischemia followed by 120 minutes of reperfusion. Myocardial infarct size was estimated by triphenyltetrazolium chloride (TTC) staining and cardiac injury was measured by estimating lactate dehydrogenase (LDH) and creatine kinase-MB (CK-MB) in the coronary effluent. Also, GSK-3β was measured and neutrophil accumulation was measured by estimating myeloperoxidase (MPO) levels. IPC significantly decreased the myocardial infarct size, the release of LDH and CK-MB, the GSK-3β levels and the MPO levels in the normal rat heart. Pre- and post-ischemic treatment with zinc chloride and zinc ionophore pyrithione (ZIP) in the normal and diabetic rat hearts significantly decreased the myocardial infarct size, the level of CK-MB and LDH in the coronary effluent and GSK-3β and MPO levels. Our results suggest that pharmacological preconditioning with zinc chloride and ZIP significantly restored the attenuated cardioprotective potential of IPC in the diabetic rat heart. PMID:26423303

  12. A glass-encapsulated calcium phosphate wasteform for the immobilization of actinide-, fluoride-, and chloride-containing radioactive wastes from the pyrochemical reprocessing of plutonium metal

    Science.gov (United States)

    Donald, I. W.; Metcalfe, B. L.; Fong, S. K.; Gerrard, L. A.; Strachan, D. M.; Scheele, R. D.

    2007-03-01

    Chloride-containing radioactive wastes are generated during the pyrochemical reprocessing of Pu metal. Immobilization of these wastes in borosilicate glass or Synroc-type ceramics is not feasible due to the very low solubility of chlorides in these hosts. Alternative candidates have therefore been sought including phosphate-based glasses, crystalline ceramics and hybrid glass/ceramic systems. These studies have shown that high losses of chloride or evolution of chlorine gas from the melt make vitrification an unacceptable solution unless suitable off-gas treatment facilities capable of dealing with these corrosive by-products are available. On the other hand, both sodium aluminosilicate and calcium phosphate ceramics are capable of retaining chloride in stable mineral phases, which include sodalite, Na 8(AlSiO 4) 6Cl 2, chlorapatite, Ca 5(PO 4) 3Cl, and spodiosite, Ca 2(PO 4)Cl. The immobilization process developed in this study involves a solid state process in which waste and precursor powders are mixed and reacted in air at temperatures in the range 700-800 °C. The ceramic products are non-hygroscopic free-flowing powders that only require encapsulation in a relatively low melting temperature phosphate-based glass to produce a monolithic wasteform suitable for storage and ultimate disposal.

  13. Biodiesel synthesis via metal oxides and metal chlorides catalysis from marine alga Melanothamnus afaqhusainii

    Institute of Scientific and Technical Information of China (English)

    Abdul Majeed Khan; Noureen Fatima

    2016-01-01

    This research article demonstrates the most comprehensive comparative catalytic study of different metal oxides and metal chlorides towards the methanolysis of triglycerides of marine red macroalga Melanothamnus afaqhusaini . CaO was found to be the most reactive metal oxide that yielded 80%biodiesel while ZnCl2 was the most reactive metal chloride that produced 60%biodiesel by mechanical stirring for 6 h at 100–110 °C. The overal reactivity order of the catalysts was found to be CaO N MgO N PbO2 N ZnCl2 N TiCl4 N PbO N HgCl2 N ZnO N AlCl3 N SnCl2 N TiO2 whereas, CaCl2, MgCl2, Al2O3, HgO, PbCl2, MnO2, MnCl2, Fe2O3 and FeCl3 were found to be non-reactive for transesterification of triglycerides. In addition, a detailed study of the screening of mobile phases and spraying reagents was conducted which showed that petroleum ether:chloroform:toluene (7:2:1) is the best mobile phase, whereas iodine crystals/silica gel is the best visualizing agent for the thin layer chroma-tography (TLC) examination of biodiesel. Biodiesel production was confirmed by comparative TLC examination. It was further supported by the determination of fuel properties of biodiesel, which were found to be similar to the standard limits of American Society for Testing and Materials (ASTM).

  14. Broadband ultrafast transient absorption of iron (III) tetraphenylporphyrin chloride in the condensed phase

    Energy Technology Data Exchange (ETDEWEB)

    Rury, Aaron S., E-mail: arury@umich.edu [Applied Physics Program, University of Michigan, Ann Arbor, MI 48109 (United States); Department of Chemistry, University of Michigan, Ann Arbor, MI 48109 (United States); Sension, Roseanne J., E-mail: rsension@umich.edu [Applied Physics Program, University of Michigan, Ann Arbor, MI 48109 (United States); Department of Chemistry, University of Michigan, Ann Arbor, MI 48109 (United States); Department of Physics, University of Michigan, Ann Arbor, MI 48109 (United States)

    2013-08-30

    Highlights: ► Nonradiative relaxation of Fe{sup (III)}TPP chloride is complete within picoseconds. ► Similar pathways are observed following S{sub 2} and S{sub 1} excitation. ► The intermediate spin {sup 4}T iron state is formed before ground state recovery. ► Ground state recovery occurs within 13–18 ps at room temperature. - Abstract: Ultrafast transient absorption of iron (III) tetraphenylporphyrin chloride [Fe{sup (III)}TPPCl] is used to probe the excited state relaxation in room temperature solution. The ground state was excited either at 400 nm near the Soret resonance or at 520 nm in the Q resonance. Relaxation from the lowest lying porphyrin singlet (π, π{sup ∗}) manifold results in formation of a LMCT (π, d{sub π}) state on a time scale of 0.4–0.6 ps followed by a metal-to-ligand charge transfer transition from the iron to the porphyrin on a time scale of 1.8–2.3 ps, producing an excited {sup 4}T intermediate spin state of Fe{sup (III)}TPPCl. The system relaxes back to the high spin {sup 6}A{sub 1} ground state on a time scale of 13–18 ps. The relatively slow electronic relaxation of the more symmetric Fe{sup (III)}TPPCl compound is contrasted with the much faster subpicosecond ground state recovery observed for less symmetric biologically active heme systems at room temperature.

  15. The Chloride Anion Acts as a Second Messenger in Mammalian Cells - Modifying the Expression of Specific Genes

    Directory of Open Access Journals (Sweden)

    Ángel G. Valdivieso

    2016-01-01

    Full Text Available Background/Aims: Cystic Fibrosis (CF is caused by mutations in the CFTR gene, encoding a cAMP-activated chloride (Cl- channel. We have previously demonstrated that the expression of several genes can be modulated by the CFTR activity; among them, SRC, MTND4, CISD1, and IL1B. However, the CFTR signalling mechanism involved in the expression of CFTR-dependent genes is unknown. The aim of this work was to determine if intracellular chloride (Cl-i might function as a second messenger modulating the expression of specific genes. Methods: Differential display (DD was applied to IB3-1 cells (CF cells, cultured under conditions that produce different intracellular Cl- concentrations ([Cl-]i, to analyse their expression profile. Results: Several differentially expressed gene products were observed by using DD, suggesting the presence of chloride-dependent gene expression. Two cDNA fragments, derived from differentially expressed mRNAs and showing opposed response to Cl-‚ were isolated, cloned, sequenced and its Cl- dependency validated by reverse transcription quantitative-PCR (RT-qPCR. We identified the gene RPS27, which encodes the multifunctional ribosomal protein RPS27, also known as metallopanstimulin-1 (MPS-1, and the gene GLRX5, encoding glutaredoxin-related protein 5, as chloride-dependent genes. RPS27 was negatively regulated with increased [Cl-]i, approximately from 25-75 mM Cl- (EC50 = 46 ± 7 mM, and positively regulated from 75-125 mM Cl- (EC50 = 110 ± 11 mM (biphasic response. In contrast, GLRX5 was positively modulated by [Cl-]i, showing a typical sigmoidal dose-response curve from 0-50 mM Cl-, reaching a plateau after 50 mM Cl- (EC50 ∼ 34 mM. Conclusion: The results suggest the existence of chloride-dependent genes. The Cl- anion, therefore, might act as a second messenger for channels or receptors able to modulate the intracellular Cl- concentration, regulating in turn the expression of specific genes.

  16. Antiviral effect of lithium chloride on infection of cells by canine parvovirus.

    Science.gov (United States)

    Zhou, Pei; Fu, Xinliang; Yan, Zhongshan; Fang, Bo; Huang, San; Fu, Cheng; Hong, Malin; Li, Shoujun

    2015-11-01

    Canine parvovirus type 2 causes significant viral disease in dogs, with high morbidity, high infectivity, and high mortality. Lithium chloride is a potential antiviral drug for viruses. We determined the antiviral effect of Lithium Chloride on canine parvovirus type 2 in feline kidney cells. The viral DNA and proteins of canine parvovirus were suppressed in a dose-dependent manner by lithium chloride. Further investigation verified that viral entry into cells was inhibited in a dose-dependent manner by lithium chloride. These results indicated that lithium chloride could be a potential antiviral drug for curing dogs with canine parvovirus infection. The specific steps of canine parvovirus entry into cells that are affected by lithium chloride and its antiviral effect in vivo should be explored in future studies.

  17. Improved production, characterization and flocculation properties of poly (-glutamic acid produced from Bacillus Subtilis

    Directory of Open Access Journals (Sweden)

    Bhunia B

    2012-04-01

    Full Text Available Bacillus subtilis 2063 produced extracellular biopolymer whichshowed excellent flocculation activity. The biopolymer wasconfirmed as poly (γ-glutamic acid (PGA by using productcharacterization. HPLC profile showed that molecular weight ofPGA was found to be 5.8×106 Da. Improved production,Characterization and flocculation properties of PGA produced byBacillus species were studied. PGA produced by B. subtilis wasdevoid of any polysaccharides. The flocculating activity wasmarkedly stimulated by the addition of cations. The pH of reaction mixture also influenced the flocculating activity. Glycerol and ammonium chloride were found to be most useful carbon and nitrogen sources. An overall 4.24-fold increase in protease production was achieved in the design medium composed with Glycerol and ammonium chloride as a carbon and nitrogen sources as compared with basal media. PGA production increased significantly with optimized medium (21.42 gl-1 when compared with basal medium (5.06 gl-1.

  18. Investigation of factors affecting the accumulation of vinyl chloride in polyvinyl chloride piping used in drinking water distribution systems.

    Science.gov (United States)

    Walter, Ryan K; Lin, Po-Hsun; Edwards, Marc; Richardson, Ruth E

    2011-04-01

    Plastic piping made of polyvinyl chloride (PVC), and chlorinated PVC (CPVC), is being increasingly used for drinking water distribution lines. Given the formulation of the material from vinyl chloride (VC), there has been concern that the VC (a confirmed human carcinogen) can leach from the plastic piping into drinking water. PVC/CPVC pipe reactors in the laboratory and tap samples collected from consumers homes (n = 15) revealed vinyl chloride accumulation in the tens of ng/L range after a few days and hundreds of ng/L after two years. While these levels did not exceed the EPA's maximum contaminant level (MCL) of 2 μg/L, many readings that simulated stagnation times in homes (overnight) exceeded the MCL-Goal of 0 μg/L. Considerable differences in VC levels were seen across different manufacturers, while aging and biofilm effects were generally small. Preliminary evidence suggests that VC may accumulate not only via chemical leaching from the plastic piping, but also as a disinfection byproduct (DBP) via a chlorine-dependent reaction. This is supported from studies with CPVC pipe reactors where chlorinated reactors accumulated more VC than dechlorinated reactors, copper pipe reactors that accumulated VC in chlorinated reactors and not in dechlorinated reactors, and field samples where VC levels were the same before and after flushing the lines where PVC/CPVC fittings were contributing. Free chlorine residual tests suggest that VC may be formed as a secondary, rather than primary, DBP. Further research and additional studies need to be conducted in order to elucidate reaction mechanisms and tease apart relative contributions of VC accumulation from PVC/CPVC piping and chlorine-dependent reactions.

  19. Simultaneous optical recording in multiple cells by digital holographic microscopy of chloride current associated to activation of the ligand-gated chloride channel GABA(A receptor.

    Directory of Open Access Journals (Sweden)

    Pascal Jourdain

    Full Text Available Chloride channels represent a group of targets for major clinical indications. However, molecular screening for chloride channel modulators has proven to be difficult and time-consuming as approaches essentially rely on the use of fluorescent dyes or invasive patch-clamp techniques which do not lend themselves to the screening of large sets of compounds. To address this problem, we have developed a non-invasive optical method, based on digital holographic microcopy (DHM, allowing monitoring of ion channel activity without using any electrode or fluorescent dye. To illustrate this approach, GABA(A mediated chloride currents have been monitored with DHM. Practically, we show that DHM can non-invasively provide the quantitative determination of transmembrane chloride fluxes mediated by the activation of chloride channels associated with GABA(A receptors. Indeed through an original algorithm, chloride currents elicited by application of appropriate agonists of the GABA(A receptor can be derived from the quantitative phase signal recorded with DHM. Finally, chloride currents can be determined and pharmacologically characterized non-invasively simultaneously on a large cellular sampling by DHM.

  20. Modelling of chloride transport in non-saturated concrete : from microscale to macroscale

    OpenAIRE

    Fenaux, Michiel

    2013-01-01

    Corrosion of steel bars embedded in concrete has a great influence on structural performance and durability of reinforced concrete. Chloride penetration is considered to be a primary cause of concrete deterioration in a vast majority of structures. Therefore, modelling of chloride penetration into concrete has become an area of great interest. The present work focuses on modelling of chloride transport in concrete. The differential macroscopic equations which govern the problem...

  1. Pitting Corrosion of Ni3(Si,Ti) Intermetallic Compound at Various Chloride Concentrations

    OpenAIRE

    Gadang Priyotomo

    2013-01-01

    The pitting corrosion of Ni3(Si,Ti) intermetallic compound was investigated as function of chloride concentration by using electrochemical method and scanning electron microscope in sodium chloride solutions at 293 K.  In addition, the pitting corrosion of type C276 alloy was also studied under the same experimental condition for comparison.  The pitting potential obtained for the intermetallic compound decreased with increasing chloride concentration.  The specific pitting potential and pitt...

  2. Determination of chloride diffusion constants for concretes of differing water to cement ratios and admixtures

    OpenAIRE

    Smith, David Gilman

    1988-01-01

    Reinforced concrete exposed to chlorides is subject to rapid deterioration once the concentration of the chloride ion in the concrete reaches a critical level to cause corrosion of the reinforcing steel. The chloride ion diffuses through concrete according to Fick's Law, which is a function of time, a driving concentration, and a diffusion constant. The diffusion constant varies with temperature and the variety of concrete . The research included determination of diffusion ...

  3. Prediction of the Chloride Resistance of Concrete Modified with High Calcium Fly Ash Using Machine Learning

    OpenAIRE

    Michał Marks; Michał A. Glinicki; Karolina Gibas

    2015-01-01

    The aim of the study was to generate rules for the prediction of the chloride resistance of concrete modified with high calcium fly ash using machine learning methods. The rapid chloride permeability test, according to the Nordtest Method Build 492, was used for determining the chloride ions’ penetration in concrete containing high calcium fly ash (HCFA) for partial replacement of Portland cement. The results of the performed tests were used as the training set to generate rules describing th...

  4. Effect of Fractal Dimension of Fine Aggregates on the Concrete Chloride Resistance

    OpenAIRE

    Xue, Wen; J. Chen

    2016-01-01

    The relationship between fractal dimension of fine aggregates and the chloride resistance of concrete was investigated in this study. Both concrete and mortar specimens were cast. Concrete specimens were in the same mix design as the mortar specimens except for the coarse aggregates. The specimens were divided into different groups based on the gradation of the fine aggregates. The chloride resistances of concrete specimens were tested by using the rapid chloride migration method. The results...

  5. Chloride-mass-balance for predicting increased recharge after land-use change

    OpenAIRE

    Gee, G.W.; Z. F. Zhang; Tyler, S.W.; Albright, W.H.; Singleton, M.J.

    2004-01-01

    The chloride-mass-balance (CMB) method has been used extensively to estimate recharge in arid and semi-arid environments. Required data include estimates of annual precipitation, total chloride input (from dry fallout and precipitation), and pore-water chloride concentrations. Typically, CMB has been used to estimate ancient recharge but recharge from recent land-use change has also been documented. Recharge rates below a few mm/yr are reliably detected with CMB; however, estimates above...

  6. Estimation of aquifer recharge by means of atmospheric chloride deposition balance

    OpenAIRE

    Custodio Gimena, Emilio

    2010-01-01

    The measurement of the atmospheric chloride deposition on land allows the estimation of long-term average aquifer recharge when the average chloride content in the recharge water is known. This is a well-established, simple method, although not exempt from theoretical and practical difficulties. In spite of its potential, it is seldom applied. Under favorable circumstances, the results are reliable and the associated uncertainty can be determined. The chloride content of recharge water ...

  7. Prediction of the Service Life of a Reinforced Concrete Column under Chloride Environment

    OpenAIRE

    Mohammad K. Alkam; Maha Alqam

    2015-01-01

    In the present investigation, service life of a reinforced concrete column exposed to chloride environment has been predicted. This study has been based on numerical simulation of chloride ion diffusion in a concrete column during its anticipated life span. The simulation process has included the concrete cover replacement whenever chloride ion concentration has reached the critical threshold value at the reinforcement surface. Repair scheduling of the concrete column under consideration has ...

  8. Effect of carbonation on the chloride diffusion of mortar specimens exposed to cyclic wetting and drying

    OpenAIRE

    Malheiro, Raphaele Lira Meireles Castro; Camões, Aires; Ferreira, Rui Miguel; Meira, Gibson; Amorim, M. T. Pessoa de

    2014-01-01

    Carbonation and chloride ingress are the two main causes of corrosion in reinforced concrete structures. Despite the combined action of these mechanisms being a reality, there is little research on the effect of carbonation on the chloride diffusion in concrete. This work intends to study the influence of carbonation on chloride diffusion of mortar specimens. Cubic mortar specimens were cast with 0.55 of water-cement ratio. After curing, the specimens were subjected to 56 days of wetting and ...

  9. Gene–environment interactions between DNA repair polymorphisms and exposure to the carcinogen vinyl chloride

    OpenAIRE

    Li, Yongliang; Marion, Marie-Jeanne; Zipprich, Jennifer; Santella, Regina M.; Freyer, Greg; Brandt-Rauf, Paul W.

    2009-01-01

    We have recently suggested that polymorphisms in metabolism and repair pathways may play a role in modulating the effects of exposure to the carcinogen vinyl chloride in the production of biomarkers of its mutagenic damage. The aim of the present study was to extend these observations by examining gene–environment interactions between several common polymorphisms in the DNA repair genes XRCC1 and ERCC2/XPD and vinyl chloride exposure on the production of vinyl chloride-induced biomarkers of m...

  10. Diffusion Decay Coefficient for Chloride Ions of Concrete Containing Mineral Admixtures

    OpenAIRE

    Jae-Im Park; Kwang-Myong Lee; Soon-Oh Kwon; Su-Ho Bae; Sang-Hwa Jung; Sung-Won Yoo

    2016-01-01

    The diffusion coefficient for chloride ions and the diffusion decay coefficient for chloride ions are essential variables for a service life evaluation of concrete structures. They are influenced by water-binder ratio, exposure condition, curing temperature, cement type, and the type and use of mineral admixture. Mineral admixtures such as ground granulated blast furnace slag, fly ash, and silica fume have been increasingly used to improve resistance against chloride ions penetration in concr...

  11. On the Durability of Sealable Circular Concrete Structures under Chloride Environment

    OpenAIRE

    Changwen Mi; Kaikai Shao; Xiaobao Li

    2015-01-01

    Reinforcement corrosion resulting from chloride attack is one major mechanism that compromises concrete durability. Numerical methods were commonly used for tackling Fick’s diffusion equations. In this paper, we developed a Crank-Nicolson based finite difference scheme suitable for circular concrete structures. Both a time-dependent surface chloride model and diffusivity were considered. The impact of an ideal sealer on chloride redistribution was further investigated. Results suggested that ...

  12. Chloride Penetration Prediction in Concrete through an Empirical Model Based on Constant Flux Diffusion

    OpenAIRE

    Vera Almenar, Guillem de; Climent, Miguel-Ángel; Viqueira Pérez, Estanislao; Antón Gil, Carlos; López García, María Pilar

    2014-01-01

    An empirical model based on constant flux is presented for chloride transport through concrete in atmospherical exposure conditions. A continuous supply of chlorides is assumed as a constant mass flux at the exposed concrete surface. The model is applied to experimental chloride profiles obtained from a real marine structure, and results are compared with the classical error-function model. The proposed model shows some advantages. It yields a better predictive capacity than the classical err...

  13. On the corrosion of reinforcing steels in concrete in the presence of chlorides

    OpenAIRE

    R. Genin, Jean Marie; Raharinaivo, Andre

    1986-01-01

    The purpose of this study is to give a scientific justification to some empirical results, in steel corrosion field, from concrete containing chlorides. First, it appears that corrosion products on the steels, have different structures and natures in function of the chloride content would be inferior or superior to a characteristic value. Second, the penetration of the chlorides in the concrete can be described by a simple Fick's diffusion law in the most frecuent cases. When cement...

  14. Leaching of complex sulphide concentrate in acidic cupric chloride solutions

    Institute of Scientific and Technical Information of China (English)

    M. TCHOUMOU; M. ROYNETTE

    2007-01-01

    The chemical analysis of a complex sulphide concentrate by emission spectrometry and X-ray diffraction shows that it contains essentially copper, lead, zinc and iron in the form of chalcopyrite, sphalerite and galena. A small amount of pyrite is also present in the ore but does not be detected with X-ray diffraction. The cupric chloride leaching of the sulphide concentrate at various durations and solid/liquid ratios at 100 ℃ shows that the rate of dissolution of the ore is the fastest in the first several hours, and after 12 h it does not evolve significantly. If oxygen is excluded from the aqueous cupric chloride solution during the leaching experiment at 100 ℃, the pyrite in the ore will not be leached. The determination of principal dissolved metals in the leaching liquor by flame atomic absorption spectrometry, and the chemical analysis of solid residues by emission spectrometry and X-ray diffraction allow to conclude that the rate of dissolution of the minerals contained in the complex sulphide concentrate are in the order of galena>sphalerite>chalcopyrite.

  15. Intravesical oxybutinin chloride in children with intermittent catheterization: sonographic findings.

    Science.gov (United States)

    Zerin, J M; DiPietro, M A; Ritchey, M L; Bloom, D A

    1994-01-01

    The sonographic findings in the bladder are presented in four children with myelomeningocele and neurogenic dysfunction of the bladder, who were treated with intermittent self-catheterization and intravesical oxybutinin chloride. All were referred for routine sonography of the urinary tract. Each had infused a crushed tablet of oxybutinin chloride intravesically 30-120 min before the examination. In two children, brightly echogenic, non-shadowing particles were suspended in the bladder urine. In one of these, the particles swirled giving the impression of a "snowstorm"; in the other, most of the particles gradually settled forming an irregular clump on the bladder base. In the remaining two children, the urine appeared diffusely hazy with innumerable tiny particles giving the impression of a fine mist filling the bladder. The sonographic appearance of the urine in the bladder after intravesical instillation of crushed tablets can be dramatic and can simulate pus, blood, fungus, or other debris in the bladder lumen. In the absence of clinical symptoms or hematuria, a history of recent infusion of medication into the bladder should be sought.

  16. Large Scale Synthesis of Carbon Nanofibres on Sodium Chloride Support

    Directory of Open Access Journals (Sweden)

    Ravindra Rajarao

    2012-06-01

    Full Text Available Large scale synthesis of carbon nanofibres (CNFs on a sodium chloride support has been achieved. CNFs have been synthesized using metal oxalate (Ni, Co and Fe as catalyst precursors at 680 C by chemical vapour deposition method. Upon pyrolysis, this catalyst precursors yield catalyst nanoparticles directly. The sodium chloride was used as a catalyst support, it was chosen because of its non‐toxic and water soluble nature. Problems, such as the detrimental effect of CNFs, the detrimental effects on the environment and even cost, have been avoided by using a water soluble support. The structure of products was characterized by scanning electron microscopy, transmission electron microscopy and Raman spectroscopy. The purity of the grown products and purified products were determined by the thermal analysis and X‐ray diffraction method. Here we report the 7600, 7000 and 6500 wt% yield of CNFs synthesized over nickel, cobalt and iron oxalate. The long, curved and worm shaped CNFs were obtained on Ni, Co and Fe catalysts respectively. The lengthy process of calcination and reduction for the preparation of catalysts is avoided in this method. This synthesis route is simple and economical, hence, it can be used for CNF synthesis in industries.

  17. Formulation and Characterization of Cetylpyridinium Chloride Bioadhesive Tablets

    Science.gov (United States)

    Akbari, Jafar; Saeedi, Majid; Morteza-Semnani, Katayoun; Kelidari, Hamidreza; Lashkari, Maryam

    2014-01-01

    Purpose: Bioadhesive polymers play an important role in biomedical and drug delivery applications. The aim of this study is to develop a sustained- release tablet for local application of Cetylpyridinium Chloride (CPC). This delivery system would supply the drug at an effective level for a long period of time, and thereby overcome the problem of the short retention time of CPC and could be used for buccal delivery as a topical anti-infective agent. Methods: CPC bioadhesive tablets were directly prepared using 7 mm flat-faced punches on a hydraulic press. The materials for each tablet were weighted, introduced into the die and compacted at constant compression pressure. The dissolution tests were performed to the rotation paddle method and the bioadhesive strength of the tablets were measured. Results: The results showed that as the concentration of polymer increased, the drug release rate was decreased. Also the type and ratio of polymers altered the release kinetic of Cetylpyridinium Chloride from investigated tablets. The bioadhesion strength increased with increasing the concentration of polymer and maximum bioadhesion strength was observed with HPMC K100M. Conclusion: The selected formulation of CPC bioadhesive tablet can be used as a suitable preparation for continuous release of CPC with appropriate bioadhesion strength. PMID:25436196

  18. Coagulation properties of anelectrochemically prepared polyaluminum chloride containing active chlorine

    Institute of Scientific and Technical Information of China (English)

    HU Chengzhi; LIU Huijuan; QU Jiuhui

    2006-01-01

    With high content of the Al13 species and the active chloride, an electrochemically prepared polyaluminum chloride (E-PACl) presents integrated efficiency of coagulation and oxidation. The coagulation properties of E-PACl were systemically investigated through jar tests in the various water quality conditions. The active chlorine in E-PACl can significantly influence the coagulation behavior due to the active chlorine preoxidation, which can change the surface charge characteristic of organic matter (OM) in water. The active chlorine preoxidation could improve the E-PACl coagulation efficiency if the water possessed the characteristics of relatively low OM content (2 mg/L) and high hardness (278 mg CaCO3/L). In the water with medium content of OM (5 mg/L), dosage would be a crucial factor to decide whether the active chlorine in E-PACl aided coagulation process or not. Comparing with alkaline condition, active chlorine would show a more significant influence on the coagulation process in acidic region.

  19. Gadolinium chloride pretreatment ameliorates acute cadmium-induced hepatotoxicity.

    Science.gov (United States)

    Kyriakou, Loukas G; Tzirogiannis, Konstantinos N; Demonakou, Maria D; Kourentzi, Kalliopi T; Mykoniatis, Michael G; Panoutsopoulos, Georgios I

    2013-08-01

    Cadmium is a known industrial and environmental pollutant. It causes hepatotoxicity upon acute administration. Features of cadmium-induced acute hepatoxicity encompass necrosis, apoptosis, peliosis and inflammatory infiltration. Gadolinium chloride (GdCl3) may prevent cadmium-induced hepatotoxicity by suppressing Kupffer cells. The effect of GdCl3 pretreatment on a model of acute cadmium-induced liver injury was investigated. Male Wistar rats 4-5 months old were injected intraperitoneally with normal saline followed by cadmium chloride (CdCl2; 6.5 mg/kg) or GdCl3 (10 mg/kg) followed by CdCl2 (6.5 mg/kg; groups I and II, respectively). Rats of both the groups were killed at 9, 12, 16, 24, 48 and 60 h after cadmium intoxication. Liver sections were analyzed for necrosis, apoptosis, peliosis and mitoses. Liver regeneration was also evaluated by tritiated thymidine incorporation into hepatic DNA. Serum levels of aspartate aminotransferase (AST) and alanine aminotransferase (ALT) were also determined. Hepatic necrosis, hepatocyte and nonparenchymal cell apoptosis and macroscopic and microscopic types of peliosis hepatis were minimized by gadolinium pretreatment. Serum levels of AST and ALT were also greatly diminished in rats of group II. Tritiated thymidine incorporation into hepatic DNA was increased in gadolinium pretreatment rats. Kupffer cell activation was minimal in both the groups of rats. Gadolinium pretreatment attenuates acute cadmium-induced liver injury in young Wistar rats, with mechanisms other than Kupffer cell elimination.

  20. Accurate ab initio vibrational energies of methyl chloride

    Energy Technology Data Exchange (ETDEWEB)

    Owens, Alec, E-mail: owens@mpi-muelheim.mpg.de [Max-Planck-Institut für Kohlenforschung, Kaiser-Wilhelm-Platz 1, 45470 Mülheim an der Ruhr (Germany); Department of Physics and Astronomy, University College London, Gower Street, WC1E 6BT London (United Kingdom); Yurchenko, Sergei N.; Yachmenev, Andrey; Tennyson, Jonathan [Department of Physics and Astronomy, University College London, Gower Street, WC1E 6BT London (United Kingdom); Thiel, Walter [Max-Planck-Institut für Kohlenforschung, Kaiser-Wilhelm-Platz 1, 45470 Mülheim an der Ruhr (Germany)

    2015-06-28

    Two new nine-dimensional potential energy surfaces (PESs) have been generated using high-level ab initio theory for the two main isotopologues of methyl chloride, CH{sub 3}{sup 35}Cl and CH{sub 3}{sup 37}Cl. The respective PESs, CBS-35{sup  HL}, and CBS-37{sup  HL}, are based on explicitly correlated coupled cluster calculations with extrapolation to the complete basis set (CBS) limit, and incorporate a range of higher-level (HL) additive energy corrections to account for core-valence electron correlation, higher-order coupled cluster terms, scalar relativistic effects, and diagonal Born-Oppenheimer corrections. Variational calculations of the vibrational energy levels were performed using the computer program TROVE, whose functionality has been extended to handle molecules of the form XY {sub 3}Z. Fully converged energies were obtained by means of a complete vibrational basis set extrapolation. The CBS-35{sup  HL} and CBS-37{sup  HL} PESs reproduce the fundamental term values with root-mean-square errors of 0.75 and 1.00 cm{sup −1}, respectively. An analysis of the combined effect of the HL corrections and CBS extrapolation on the vibrational wavenumbers indicates that both are needed to compute accurate theoretical results for methyl chloride. We believe that it would be extremely challenging to go beyond the accuracy currently achieved for CH{sub 3}Cl without empirical refinement of the respective PESs.

  1. Formulation and Characterization of Cetylpyridinium Chloride Bioadhesive Tablets

    Directory of Open Access Journals (Sweden)

    Jafar Akbari

    2014-12-01

    Full Text Available Purpose: Bioadhesive polymers play an important role in biomedical and drug delivery applications. The aim of this study is to develop a sustained- release tablet for local application of Cetylpyridinium Chloride (CPC. This delivery system would supply the drug at an effective level for a long period of time, and thereby overcome the problem of the short retention time of CPC and could be used for buccal delivery as a topical anti-infective agent. Methods: CPC bioadhesive tablets were directly prepared using 7 mm flat-faced punches on a hydraulic press. The materials for each tablet were weighted, introduced into the die and compacted at constant compression pressure. The dissolution tests were performed to the rotation paddle method and the bioadhesive strength of the tablets were measured. Results: The results showed that as the concentration of polymer increased, the drug release rate was decreased. Also the type and ratio of polymers altered the release kinetic of Cetylpyridinium Chloride from investigated tablets. The bioadhesion strength increased with increasing the concentration of polymer and maximum bioadhesion strength was observed with HPMC K100M. Conclusion: The selected formulation of CPC bioadhesive tablet can be used as a suitable preparation for continuous release of CPC with appropriate bioadhesion strength.

  2. Intravesical oxybutinin chloride in children with intermittent catheterization: sonographic findings.

    Science.gov (United States)

    Zerin, J M; DiPietro, M A; Ritchey, M L; Bloom, D A

    1994-01-01

    The sonographic findings in the bladder are presented in four children with myelomeningocele and neurogenic dysfunction of the bladder, who were treated with intermittent self-catheterization and intravesical oxybutinin chloride. All were referred for routine sonography of the urinary tract. Each had infused a crushed tablet of oxybutinin chloride intravesically 30-120 min before the examination. In two children, brightly echogenic, non-shadowing particles were suspended in the bladder urine. In one of these, the particles swirled giving the impression of a "snowstorm"; in the other, most of the particles gradually settled forming an irregular clump on the bladder base. In the remaining two children, the urine appeared diffusely hazy with innumerable tiny particles giving the impression of a fine mist filling the bladder. The sonographic appearance of the urine in the bladder after intravesical instillation of crushed tablets can be dramatic and can simulate pus, blood, fungus, or other debris in the bladder lumen. In the absence of clinical symptoms or hematuria, a history of recent infusion of medication into the bladder should be sought. PMID:7824373

  3. Hydrodynamic simulation of a lithium chloride salt system.

    Energy Technology Data Exchange (ETDEWEB)

    Eberle, C. S.; Herrmann, S. D.; Knighton, G. C.

    1999-02-12

    A fused lithium chloride salt system's constitutive properties were evaluated and compared to a number of fluid properties, and water was shown to be an excellent simulant of lithium chloride salt. With a simple flow model, the principal scaling term was shown to be a function of the kinematic viscosity. A water mock-up of the molten salt was also shown to be within a {+-}3% error in the scaling analysis. This made it possible to consider developing water scaled tests of the molten salt system. Accurate flow velocity and pressure measurements were acquired by developing a directional velocity probe. The device was constructed and calibrated with a repeatable accuracy of {+-}15%. This was verified by a detailed evaluation of the probe. Extensive flow measurements of the engineering scale mockup were conducted, and the results were carefully compared to radial flow patterns of a straight blade stirrer. The flow measurements demonstrated an anti-symmetric nature of the stirring, and many additional effects were also identified. The basket design was shown to prevent fluid penetration into the fuel baskets when external stirring was the flow mechanism.

  4. QUALITY OF YOGHURTS FROM GOAT'S MILK ENRICHED WITH MAGNESIUM CHLORIDE

    Directory of Open Access Journals (Sweden)

    Agata Znamirowska

    2015-02-01

    Full Text Available Goat’s milk can be enriched with magnesium in the form of chloride before pasteurization with a save dose, i.e. 20 mg of magnesium for 100 g of milk. Higher doses of magnesium can lead to coagulation of proteins since together with the increase of the dose of fortification there increases general acidity while pH of milk decreases. Together with the increase of the dose of fortification of yoghurts with magnesium there was shown an essential proportional increase of acidity and hardness of curds persisting for 21 days of storage. Enriching goat’s milk yoghurts with magnesium decreased the intensity of „goat” smell and aftertaste and did not cause a change in colour. The most favourable solution is the production of goat’s milk yoghurts enriched with 10-20 mg of magnesium in the form of magnesium chloride. Such doses of enrichment caused successive lowering of perceptibility of „goat” aftertaste and smell together with extension of storage time.

  5. Synthesis and thermal behavior of polyacrylonitrile/vinylidene chloride copolymer

    Directory of Open Access Journals (Sweden)

    Robson Fleming

    2014-06-01

    Full Text Available Polyacrylonitrile fiber encompasses a broad range of products based on acrylonitrile (AN which is readily copolymerized with a wide range of ethylenic unsaturated monomers giving rise to polymers with different characteristics and applications. Such products can be designed for cost-effective, flame and heat resistant solutions for the textile industry, aircraft and automotive markets. In the present work acrylonitrile was copolymerized with vinylidene chloride (VDC by conventional suspension polymerization process via redox system, with an initial content of 10%/mass of the VDC monomer. The copolymer average molecular weight was obtained by Gel Permeation Chromatography (GPC and by intrinsic viscosity analysis. To control the polymerization process continuously, qualitative and quantitative analysis of the chloride content in the PAN AN/VDC copolymer structure was accomplished by using X-ray fluorescence and potentiometric titration techniques. A good correlation was found between these two techniques, leading to a straightforward verification of VDC in the polymer structure. The thermal behavior of PAN AN/VDC copolymer was performed by Differential Scanning Calorimetry (DSC and Thermogravimetric Analysis (TGA. The results showed that VDC monomers exhibited a nearly stoichiometric reaction with acrylonitrile, copolymerizing about 90% of its initial mass. VDC changed significantly the polyacrylonitrile thermal behavior, decreasing the polymer degradation temperature by about 40-50°C.

  6. Safe, Selective, and High-Yielding Synthesis of Acryloyl Chloride in a Continuous-Flow System.

    Science.gov (United States)

    Movsisyan, Marine; Heugebaert, Thomas S A; Dams, Rudy; Stevens, Christian V

    2016-08-01

    Acid chlorides are an important class of compounds and their high reactivity and instability has prompted us to develop a straightforward procedure for their synthesis with on-demand and on-site synthesis possibilities. The focus of this report is acryloyl chloride, mainly important for the acrylate and polymer industry. A continuous-flow methodology was developed for the fast and selective synthesis of the otherwise highly unstable acryloyl chloride. Three routes were investigated in a microreactor setup and all three can potentially be used for its production. The methodology was further expanded to the synthesis of other unstable acid chlorides by both the thionyl chloride and the oxalyl chloride mediated processes. The most sustainable method was the oxalyl chloride mediated procedure under solvent-free conditions, in which near-equimolar amounts of carboxylic acid and oxalyl chloride were used in the presence of catalytic amounts of DMF at room temperature. Within 1 to 3 min, nearly full conversions into the acid chlorides were achieved. PMID:27325562

  7. Influence of Fly Ash on Surface Chloride Concentration Under Shallow Immersion Condition

    OpenAIRE

    Liu, Jun; Wang, Xiaodong; Xing, Feng; Han, Ningxu

    2014-01-01

    In this paper, the influence of fly ash content on concrete surface chloride concentration was investigated through periodical tests of surface chloride concentration of concrete by immersing three kinds of concrete specimens in 5.0 wt.% sodium chloride solution. One kind of specimen is common concrete without fly ash, whereas the other two kinds of specimens are mixed with fly ash. The results show that the surface chloride ion concentration ranges from 0.295 to 0.777 wt.% for the immersed c...

  8. Indium sulfide precipitation from hydrochloric acid solutions of calcium and sodium chlorides

    International Nuclear Information System (INIS)

    The effect of precipitation duration, acid concentration, indium complexing with chloride ions on the process of indium sulfide chemical precipitation in hydrochloric acid solutions, precipitate composition and dispersity are studied. It is established that indium sulfide solubility increases in solutions with acid concentration exceeding 0.40-0.45 mol/l. Calcium and indium chloride addition to diluted hydrochloric solutions greatly increases the solubility of indium sulfide. The effect of calcium chloride on In2S3 solubility is higher than that of sodium chloride

  9. On the Durability of Sealable Circular Concrete Structures under Chloride Environment

    Directory of Open Access Journals (Sweden)

    Changwen Mi

    2015-01-01

    Full Text Available Reinforcement corrosion resulting from chloride attack is one major mechanism that compromises concrete durability. Numerical methods were commonly used for tackling Fick’s diffusion equations. In this paper, we developed a Crank-Nicolson based finite difference scheme suitable for circular concrete structures. Both a time-dependent surface chloride model and diffusivity were considered. The impact of an ideal sealer on chloride redistribution was further investigated. Results suggested that the chloride threshold depth in a concrete structure is greatly affected by the radius of curvature, environment severity, and diffusivity. For sealable concrete structures, both the sealer application timing and location are of great importance.

  10. Response to comments on "Local impermeant anions establish the neuronal chloride concentration"

    DEFF Research Database (Denmark)

    Glykys, J; Dzhala, V; Egawa, K;

    2014-01-01

    We appreciate the interest in our paper and the opportunity to clarify theoretical and technical aspects describing the influence of Donnan equilibria on neuronal chloride ion (Cl(-)) distributions....

  11. Protective effect and mechanism of lithium chloride pretreatment on myocardial ischemia-reperfusion injury in rats

    Institute of Scientific and Technical Information of China (English)

    Fang-Jiang Li; Tao Hsu; Hui-Xian Li; Jin-Zheng Shi; Mei-Ling Du; Xiao-Yuan Wang; Wen-Ting Zhang

    2014-01-01

    Objective:To investigate the protective effect and mechanism of lithium chloride pretreatment on myocardial ischemia-reperfusion injury(I-RI) in rats.Methods:A total of60SD rats were randomly divided into control group, model group, lithium chloride intervention group and L-arginine methyl ester+ lithium chloride intervention group with15 in each.TheI-RI model was established in model group, the lithium chloride intervention group andL-arginine methyl ester+ lithium chloride intervention group by method of seaming along left anterior descending coronary artery myocardial, control group was only opened the chest without seaming,ST-elevation within2 min was regarded as modeling success.Model group did not adopted any intervention, lithium chloride intervention group was treated with lithium chloride injection 15 mg/kg by jugular venipuncture preoperatively,L-arginine methyl ester+ lithium chloride intervention group was treated with intraperitoneal injection of30 mg•kg-1•d-1L-arginine methyl ester7 d before the test, and intravenous catheter of15 mg/kg lithium chloride preoperatively. The hydroxybutyric acid dehydrogenase(HBDH), creatine kinase isoenzyme(CK-MB), superoxide dismutase(SOD), malondialdehyde(MDA) level and nitric oxide synthase(NOS) activites were tested.Each large area of myocardial ischemia tissue was extracted for determination of the MDA content,SOD activity in tissue and serum, and morphological changes of myocardial tissue.Results:SOD activity was highest in lithium chloride intervention group, followed by L-arginine methyl ester+ lithium chloride intervention group, control group and model group (P0.05);HBDH andCK-MB of plasma were highest in model group, followed byL-arginine methyl ester+ lithium chloride intervention group, lithium chloride intervention group and control group(P<0.05).A significantly lighter myocardial damage was observed microscopically in lithium chloride intervention group than that inL-arginine methyl ester+ lithium

  12. Lifetime performance characteristics of screen-printed potentiometric Ag/AgCl chloride sensors

    OpenAIRE

    Cranny, Andrew; Harris, Nick; Lewis, Adam; Nie, Menyang; Wharton, Julian; Wood, Robert; Stokes, Keith

    2010-01-01

    Ag/AgCl chloride sensors were fabricated using thick-film technology. A number of different formulations were prepared and chloride responses were investigated over time. Near Nernstian, identical responses were observed over the first 160 days with an average chloride sensitivity of -51.8 ± 0.4 mV per decade change in chloride concentration (pCl), irrespective of paste formulation. After 6- months continuous immersion in tap water, pastes formulated with a glass binder began to exhibit a los...

  13. Congenital Chloride Diarrhea - Novel Mutation in SLC26A3 Gene.

    Science.gov (United States)

    Bhardwaj, Swati; Pandit, Deepti; Sinha, Aditi; Hari, Pankaj; Cheong, Hae Il; Bagga, Arvind

    2016-08-01

    The authors report a case of congenital chloride diarrhea with molecular confirmation of diagnosis. A 10-mo-old boy presented with failure to thrive, voluminous diarrhea, dehydration, hyponatremia, hypokalemia, metabolic alkalosis and history of maternal polyhydramnios. The diagnosis of congenital chloride diarrhea was based on high fecal and low urinary chloride excretion, in addition to biochemical abnormalities. Genetic testing revealed a novel homozygous mutation in exon 4 of the SLC26A3 gene that encodes the protein regulating chloride bicarbonate absorption in distal ileum and colon. Therapy with oral fluids and electrolytes led to decrease in stool frequency and improvement in growth parameters. PMID:26637435

  14. Preparation of the first electrolytic plutonium and of uranium from fused chlorides

    International Nuclear Information System (INIS)

    The production at Los Alamos of the first electrolytic plutonium is described. Because it was scarce, it was initially prepared on a 50 mg scale. The electrolyte consisted of PuCl3 dissolved in a ternary eutectic o BaCl2-KCl-NaCl and was operated at 6600C. The technique involved the electrolysis of as little as 0.1 cm3 of fused salt in a glass cell to produce liquid metal. Subsequently, a few successful 1g electrolyses were carried out with a maximum recovery of 75% of the plutonium content of the bath. It was found that the plutonium trichloride had to be dry and relatively low in oxygen and was, therefore, best prepared by dry methods. Electrolyses were performed under purified argon or hydrogen using tungsten or graphite anodes. The metallic product was pure and was used for early development of methods for cleaning, etching, and plating plutonium. Uranium was used for finding and testing techniques before plutonium became available. Acceptable deposits could not be obtained from UCl4 dissolved in the ternary chloride eutectic, but were produced when UCl3 was substituted for the tetrachloride. At about 6500C, the uranium was deposited in the form of solid, dendriti crystals. These were, in general purer than the starting materials and were readily converted to massive metal

  15. Producer, customer and supplier

    Energy Technology Data Exchange (ETDEWEB)

    Stoops, B. [PanCanadian Petroleum Ltd., Calgary, AB (Canada)

    1998-07-01

    PanCanadian`s strategy for electricity use was discussed. PanCanadian is one of Canada`s largest oil producers. The company is growth oriented, has a strong asset base and is financially sound. With its growing power consumption and increased competition, the company needs to control costs, particularly in the changing regulatory climate. Reduction in emissions is also one of the challenges facing the company. Under these circumstances the company has the opportunity to play more than one role: as a proactive consumer actively managing its own consumption, as a generator of its own electric power, and as a supplier of electricity to the grid. 2 figs.

  16. Performance of separation processes for precipitated calcium carbonate produced with an innovative method from steelmaking slag and carbon dioxide

    Directory of Open Access Journals (Sweden)

    Sebastian eTeir

    2016-02-01

    Full Text Available In this work, experiments were performed to determine the filterability of calcium carbonate produced with an alternative calcium carbonate production concept. The concept uses steelmaking slag as raw material and has potential to fix CO2 emissions and utilize steelmaking slag, simultaneously. As calcium carbonate is precipitated in a solution containing ammonium chloride, calcium chloride and ammonia, the product needs to be washed and hence filtered. In this work different separation processes, including washing, filtering and drying, were tested on two calcium carbonate slurries produced from steel converter slag and CO2 by a laboratory-scale pilot facility, with the aim of obtaining a solid product with a low chloride content using a minimum amount of washing water. The order of maximum filtration rates achievable of the calcium carbonate slurries was determined by experimental work. The tests included pressure filtration and vacuum filtration and the test series contained altogether 21 different filtration cycles with varying combinations of filtering, washing, and drying steps. The filtered cakes were analyzed by their residual moisture content, chloride content and conductivity, and the filtrates by their residual solids content, chloride content and conductivity. Pressure filtration gave a high capacity (400-460 kg/m2h and a low cake residual moisture content (12-14 wt-%. Vacuum filtration gave slightly higher filtration rates (500-610 kg/m2h at the lowest residual chloride contents of the cakes, but the cake residual moisture also stayed higher (25-26 wt-%. As the vacuum filtration tests used a filter cloth with higher permeability than that of the pressure filtration tests, a slightly higher filtration rate was expected. However, both filtration technologies seem suitable for filtering and washing calcium carbonate prepared with the studied method as a residual chloride content as low as 10 ppm of the filtered solids can be achieved

  17. Technical Note: Could benzalkonium chloride be a suitable alternative to mercuric chloride for preservation of seawater samples?

    Directory of Open Access Journals (Sweden)

    J. Gloël

    2015-08-01

    Full Text Available Instrumental equipment unsuitable or unavailable for fieldwork as well as lack of ship space can necessitate the preservation of seawater samples prior to analysis in a shore-based laboratory. Mercuric chloride (HgCl2 is routinely used for such preservation, but its handling and subsequent disposal incur significant risks and expense. Benzalkonium chloride (BAC has been used previously for freshwater samples. Here, we assess BAC as a less hazardous alternative microbial inhibitor for marine samples prior to the measurement of oxygen-to-argon (O2/Ar ratios, as used for the determination of plankton net community production. BAC at a concentration of 50 mg dm−3 inhibited microbial activity for at least three days in seawater with chlorophyll a (Chl a concentrations up to 1 mg m−3, possibly longer when Chl a concentrations were lower. BAC concentrations of 100 and 200 mg dm−3 were no more effective than 50 mg dm−3. With fewer risks to human health and the environment, and no requirement for expensive waste disposal, BAC could be a viable alternative to HgCl2 for short-term preservation of seawater samples, but is not a replacement for HgCl2 in the case of oxygen triple isotope analysis, which requires storage over weeks to months. In any event, further tests on a case-by-case basis should be undertaken if use of BAC was considered, since its inhibitory activity may depend on concentration and composition of the microbial community.

  18. Effet of Mercuric Chloride and Cadmium Chloride on Gonadal Function and Its regulation in Sexually Mature Common Carp Cyprinus carpio

    Institute of Scientific and Technical Information of China (English)

    DilipMUKHERJEE; VinodKumar; 等

    1994-01-01

    Gnadal function in fish,Cyprinus carpio was significantly affected by sublethal doses of mecuric chloride(HgCl2)and cadmium chloride(CdCl2)in chronic(45days)exposure,Parameters investigated were nonesterified(NE)and esterified(E)cholesterol of ovary, liver and serum and ovarian 3β-Hydroxysteroid and 17β-Hydroxysteroid dehydrogenase enzyme activity and servum and pituitary gonadotropin(GtH)levels.Both the pollutats were able to reduce the hypothalamic extract(HE)or gonadotropin releasing hormone (GnRH)induced pituiteray GtH release in vitro.Short term(96h)exposure of the fish to the polltants had no significant effect on the gonadal founction.In addition to the deleterious effect of pollutants on the gonadal steroidogenesis and pituitary gonadotropin release,using [4-14C] cholesterol as a tracer it was found that for 45 days exposure,HgCl2 had an adverse effect on the transport of cholesterol from circulation to ovary.

  19. Technical note: Could benzalkonium chloride be a suitable alternative to mercuric chloride for preservation of seawater samples?

    Science.gov (United States)

    Gloël, J.; Robinson, C.; Tilstone, G. H.; Tarran, G.; Kaiser, J.

    2015-12-01

    Instrumental equipment unsuitable or unavailable for fieldwork as well as lack of ship space can necessitate the preservation of seawater samples prior to analysis in a shore-based laboratory. Mercuric chloride (HgCl2) is routinely used for such preservation, but its handling and subsequent disposal incur environmental risks and significant expense. There is therefore a strong motivation to find less hazardous alternatives. Benzalkonium chloride (BAC) has been used previously as microbial inhibitor for freshwater samples. Here, we assess the use of BAC for marine samples prior to the measurement of oxygen-to-argon (O2 / Ar) ratios, as used for the determination of biological net community production. BAC at a concentration of 50 mg dm-3 inhibited microbial activity for at least 3 days in samples tested with chlorophyll a (Chl a) concentrations up to 1 mg m-3. BAC concentrations of 100 and 200 mg dm-3 were no more effective than 50 mg dm-3. With fewer risks to human health and the environment, and no requirement for expensive waste disposal, BAC could be a viable alternative to HgCl2 for short-term preservation of seawater samples, but is not a replacement for HgCl2 in the case of oxygen triple isotope analysis, which requires storage over weeks to months. In any event, further tests on a case-by-case basis should be undertaken if use of BAC was considered, since its inhibitory activity may depend on concentration and composition of the microbial community.

  20. Preparation of robust polyamide microcapsules by interfacial polycondensation of p-phenylenediamine and sebacoyl chloride and plasticization with oleic acid.

    Science.gov (United States)

    Rosa, Natacha; Martins, Gabriela V; Bastos, Margarida M S M; Gois, Joana R; Coelho, Jorge F J; Marques, Juliana; Tavares, Carlos J; Magalhães, Fernão D

    2015-01-01

    Microcapsules produced by interfacial polycondensation of p-phenylenediamine (PPD) and sebacoyl chloride (SC) were studied. The products were characterized in terms of morphology, mean diameter and effectiveness of dodecane encapsulation. The use of Tween 20 as dispersion stabilizer, in comparison with polyvinyl alcohol (PVA), reduced considerably the mean diameter of the microcapsules and originated smoother wall surfaces. When compared to ethylenediamine (EDA), microcapsules produced with PPD monomer were more rigid and brittle, prone to fracture during processing and ineffective retention of the core liquid. The use of diethylenetriamine (DETA) cross-linker in combination with PPD did not decrease capsule fragility. On the other hand, addition of a small fraction of oleic acid to the organic phase remarkably improved wall toughness and lead to successful encapsulation of the core-oil. Oleic acid is believed to act as a plasticizer. Its incorporation in the polymeric wall was demonstrated by FTIR and (1)H-NMR.

  1. Chloride content and pH value in the pore solution of concrete under carbonation

    Institute of Scientific and Technical Information of China (English)

    Xiao-mei WAN; Folker H.WITTMANN; Tie-jun ZHAO; Hong FAN

    2013-01-01

    Chloride content and the pH value of the pore solution in the neighborhood of steel reinforcement are decisive parameters for initiation and rate of corrosion.The pore solution of cement mortar and hardened cement paste has been expressed from the pore space by high pressure in the investigation.The influence of the water-cement ratio,age,and addition of chloride to the fresh mix on chloride content in the pore solution has been determined by ion chromatography.At the same time the pH value of the pore solution has been determined.The dissolved chloride content decreases with increase in the water-cement ratio.The amount of bound chloride increases with time,but it decreases with decreasing content of dissolved chloride in the pore solution.A significant influence of carbonation on the dissolved chloride content of the pore solution has been observed.With complete carbonation,the dissolved chloride content in cement mortar and hardened cement paste increases by a factor between 2 and 12.The bound chloride decreases by 27%-54%.As expected,the pH value decreases from around 13.2 to as low as 8.0 due to carbonation.It can be concluded that carbonation not only lowers the pH value but liberates bound chloride.This is one obvious reason why the combined action of chloride penetration and carbonation accelerates steel corrosion and shortens the service life of reinforced concrete structures.

  2. Modeling Fate and Transport of Chloride from Deicers in Urban Floodplains: Implications for Urban Planning

    Science.gov (United States)

    Ledford, S. H.; Lautz, L.

    2015-12-01

    Road salting in urban areas of the northeastern United States increases chloride concentrations in urban streams. Groundwater storage of saline road runoff results in increased surface water chloride concentrations through time, even in non-winter months. Stream-groundwater (SW-GW) interactions promote buffering of large seasonal swings in stream chloride concentrations, resulting in lower surface water chloride in winter and higher concentrations in summer, relative to streams hydrologically disconnected from riparian floodplains. However, the hydrogeologic processes controlling salt storage and transport in urban floodplain aquifers have not been fully investigated. We developed a 3D numerical groundwater flow and solute transport model of an urban floodplain in Syracuse, New York, using MODFLOW and MT3DMS. We ran the model for 1 year, calibrating to three conditions: water table elevations along a riparian transect, measurements of net groundwater flux to the stream along the 500-m reach, and chloride concentrations in groundwater through time in riparian wells. Chloride enters the riparian aquifer via three pathways: hillslope groundwater discharge, hyporheic exchange, and groundwater recharge during overbank flooding events. Winter overbank flooding events are the primary source of chloride to floodplain sediments. While hillslope groundwater discharge results in relatively uniform chloride through time in high conductivity units, surficial floodplain sediments with lower conductivity have high chloride concentrations from winter overbank flood events. When compared to road salt application rates (up to 20 tons of salt per lane kilometer per year), the 0.013 km2 floodplain holds only a tiny fraction of chloride applied in a watershed (>100 km of road in the watershed). To promote riparian aquifer storage of road salt and buffering of stream chloride concentrations, urban planners should design urban floodplains for frequent winter flooding events, and allow

  3. Dynamic [Cl{sup -}]{sub i} measurement with chloride sensing quantum dots nanosensor in epithelial cells

    Energy Technology Data Exchange (ETDEWEB)

    Wang Yuchi; Mao Hua; Wong, Lid B, E-mail: ywang@biotechplex.com [BioTechPlex Corporation, 1205 Linda Vista Drive Suite A, San Marcos, CA 92078 (United States); Cytoptics Corporation, 1205 Linda Vista Drive Suite B, San Marcos, CA 92078 (United States)

    2010-02-05

    We have synthesized a chloride sensing quantum dots (QD) nanosensor, Cl-QD, for the dynamic measurements of chloride ion concentration in the millimolar range, a sensitivity that is applicable to most physiological intracellular chloride ion concentration ([Cl{sup -}]{sub i}) measurements in epithelial cells. The Cl-QD is synthesized by conjugating an anion receptor, 1-(2-mercapto-ethyl)-3-phenyl-thiourea (MEPTU) to a water soluble CdSe/ZnS QD at an emission wavelength of 620 nm. Upon binding of chloride ions to the Cl-QD, a photo-induced electron transfer mechanism caused the fluorescence of the QD to quench. This resulted in an inversely proportional relationship between the chloride ion concentration and the fluorescence intensity of the Cl-QD. We have utilized this Cl-QD to measure [Cl{sup -}]{sub i} in T84 and CF-PAC cultured cells, with either the C1C-2 or CFTR chloride channels being manipulated by pharmacological chloride channel activators and inhibitors. Activations of C1C-2 and CFTR chloride channels in T84 by the respective lubiprostone and genistein caused predictive increases in the fluorescence of the Cl-QD, i.e., a decrease of [Cl{sup -}]{sub i}. Conversely, glibenclamide, a chloride channel inhibitor, applied to the CF-PAC cells caused a predictable decrease in the fluorescence of Cl-QD due to the increase of [Cl{sup -}]{sub i}. These are the first data in using QD-based chloride ion sensors for dynamic measurements of intracellular chloride ion concentrations in epithelial cells.

  4. Cystic fibrosis transmembrane conductance regulator and the outwardly rectifying chloride channel: a relationship between two chloride channels expressed in epithelial cells.

    Science.gov (United States)

    Hryciw, D H; Guggino, W B

    2000-11-01

    1. Mutations in the cystic fibrosis transmembrane conductance regulator (CFTR) result in the primary defect observed in patients with cystic fibrosis. 2. The CFTR is a member of the ATPase-binding cassette (ABC) transporter family but, unlike other members of this group, CFTR conducts a chloride current that is activated by cAMP. 3. In epithelial cells, the cAMP-stimulated chloride current is conducted by both CFTR and the outwardly rectifying chloride channel (ORCC). 4. The present review summarizes the current knowledge of the properties of the two channels, as well as their relationship. Because the gene encoding the ORCC has not been identified, a discussion as to possible candidates for this chloride channel is included. PMID:11071305

  5. Estimates of Effective Recharge in the Amargosa Desert Using a Simple Elevation-Dependent Chloride Mass-Balance Method and a Minimum Effective Recharge Elevation

    Science.gov (United States)

    Woocay, A.; Al-Qudah, O. M.; Walton, J. C.

    2015-12-01

    Recharge estimates in desert environments are complicated by several factors. Deserts have low and infrequent rainfall that frequently occur in the form of sudden thunderstorms. For the most part, precipitation on desert valleys evaporates without much, if any, infiltration due to high evaporation rates, and precipitation on mountain tops quickly turns into runoff that has little time to infiltrate where it originated. Furthermore, water flow in washes is usually sizable and rapid but short lived and ephemeral, thus difficult to gage. Here we present recharge calculations for the Amargosa Desert, NV, using a simple elevation-dependent chloride mass-balance method modified by estimating a Minimum Effective Recharge Elevation (MERE). For each defined watershed, an average groundwater chloride concentration is used and the chloride deposition rate is assessed in the subject watersheds over all land elevations above the estimated MERE by assuming two constant spatial and temporal concentrations of chloride in precipitation and that precipitation is a function of elevation. The first chloride concentration used corresponds to contemporary values of the region and the second concentrations corresponds to an upper bound as an attempt to correct for either greater past chloride loading or a higher past precipitation with chloride concentration remaining constant. The MERE for the Amargosa desert was appraised as 1,200 m AMSL, based upon the elevation of the orifice of Cane Spring (1,237 m AMSL), one of the lowest-elevation permanent spring on the Nevada National Security Site. This minimum elevation is the cutoff altitude for our calculations at which precipitation is considered to make a significant contribution to recharge. Elevation-dependent precipitation was evaluated relating elevation data from the online mapping software ACME Labs Mapper 2.1 and precipitation data from the PRISM Climate Group's PRISM model. The Parameter-elevation Regressions on Independent Slopes

  6. Effects of antigliomatin from the scorpion venom of Buthus martensii Karsch on chloride channels on C6 glioma cells

    Institute of Scientific and Technical Information of China (English)

    Zan Wang; Mingxian Li; Hongmei Meng; Min Huang; Weihong Lin; Li Cui; Shao Wang

    2011-01-01

    Using whole-cell patch-clamp recordings, the effects of antigliomatin were observed on chloride channels on C6 glioma cells cultured in vitro. Antigliomatin was extracted from the venom of the scorpion Buthus martensii Karsch. Chloride channels are closed under normal osmotic pressure. When osmotic pressure was reduced to 120, 110 and 100 mV, the cell volume enlarged, chloride channels opened, and the chloride channel current increased. Three minutes after antigliomatin treatment, the chloride channel current decreased in a dose-dependent manner. These results show that antigliomatin extracted from the venom of the scorpion Buthus martensii Karsch diminishes chloride channel currents on C6 glioma cells.

  7. Process for producing hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Doi, K.; Komatsu, A.; Moroe, M.; Moroe, T.

    1980-07-22

    A process is described for producing a hydrocarbon product consisting essentially of hydrocarbons having about 10 to 50 carbon atoms with 60% or more of said product consisting of hydrocarbons containing 25 to 32 carbon atoms which comprises subjecting a synthetic polyisoprene rubber having 92 to 97% cis-type double bods to a thermally destructive distillation at about 300 to 400/sup 0/ C for about 30 minutes under a reduced pressure of about 0.1 to 5 mm. Hg to obtain said hydrocarbon product consisting essentially of hydrocarbons having about 10 to 50 carbon atoms with 60% or more of said product consisting of hydrocarbons containing 25 to 35 carbon atoms, said hydrocarbon product not having a bad odor and containing scarcely any resinous material.

  8. Method of producing alkylbenzene

    Energy Technology Data Exchange (ETDEWEB)

    Samokhvalov, A.I.; Golod, A.L.; Khadzhiyev, S.N.; Kirilin, Yu.A.; Nikitin, Yu.A.; Sumanov, V.T.

    1979-09-25

    An improved method of producing alkylbenzene (AB) by alkylation of isoparaffin hydrocarbons using olefin hydrocarbons in the presence of H/sub 2/SO/sub 4/ (I) by turbulent contact of (I) and a mixture of hydrocarbons at a reagent feed rate 1.0-8.0 m/sec for 0.1-1.5 seconds at a temperature from -2 to +120 degrees and pressure of approximately 48 atm is proposed. The parameters of the alkylation process are cited. The AB obtained features an octane number of 92.2 and contains 5.2 parts per million esters of I. The method makes it possible to obtain high quality AB and simplifies equipment and reduces process time.

  9. Mild and efficient cyanuric chloride catalyzed Pictet–Spengler reaction

    Directory of Open Access Journals (Sweden)

    Ashish Sharma

    2013-06-01

    Full Text Available A practical, mild and efficient protocol for the Pictet–Spengler reaction catalyzed by cyanuric chloride (trichloro-1,3,5-triazine, TCT is described. The 6-endo cyclization of tryptophan/tryptamine and modified Pictet–Spengler substrates with both electron-withdrawing and electron-donating aldehydes was carried out by using a catalytic amount of TCT (10 mol % in DMSO under a nitrogen atmosphere. TCT catalyzed the Pictet–Spengler reaction involving electron-donating aldehydes in excellent yield. Thus, it has a distinct advantage over the existing methodologies where electron-donating aldehydes failed to undergo 6-endo cyclization. Our methodology provided broad substrate scope and diversity. This is indeed the first report of the use of TCT as a catalyst for the Pictet–Spengler reaction.

  10. Redox reactions in rare earth chloride molten electrolytes

    International Nuclear Information System (INIS)

    Rare earth (REM, Ln) solutions in chloride melts including MCI+LnCl3 mixtures, where M - alkali metals, were investigated by potentiometry, voltammetry, conductometry in wide concentration and temperature intervals. Findings present complete and trusty information on the valent state of rare earths, structure and composition of complex ions affecting essentially on properties of electrolytes. It is demonstrated that the coexistence of rare earth ions with different oxidation level formed as a result of possible redox reactions: 2Ln3+ + Ln ↔3Ln2+, Ln2+ + Ln↔2Ln+ and nM+ + Ln↔nM + Lnn+ appears sharply in thermodynamic and transport properties of molten Ln-LnCl3 and Ln-LnCl3-MCl systems

  11. Chrono-amperometric studies in melt alkaline nitrates and chlorides

    International Nuclear Information System (INIS)

    This research thesis proposes a large overview of the electrochemical behaviour of a number of metals and alloys in melt alkaline chlorides and nitrates at various temperatures. These salts are generally pure but, in some experiments, contain humidity or gases. The author addresses and discusses all the reactions which may occur at the electrode between the salt decomposition potentials. After having recalled and commented some definitions and fundamental principles of thermodynamics and electrochemical kinetics, presented the methods (polarization curves, measurements and additional analysis), the experimental apparatus and the reference electrodes in melt salts, the author reports the results obtained with the studied melt salts, and proposes an interpretation of Log i/U curves

  12. Applicability of certain materials and protective coatings in fused chlorides

    Energy Technology Data Exchange (ETDEWEB)

    Migai, L.L.; Verizhnikova, G.N.

    1976-09-01

    The corrosion resistance of a number of metals, alloys, ceramic materials, and enamel coatings was investigated in mixtures of fused freshly prepared chlorides at 500 to 550/sup 0/C in air. The chlorides NaCl, KCl, and CaCl/sub 2/ of cp and ar grade were dried in air at 200 to 250/sup 0/C for 6 h, remelted at 800/sup 0/C, and fused in given ratios for 3 h; anhydrous commercial MgCl/sub 2/, AlCl/sub 3/, and FeCl/sub 3/, until a homogeneous melt was obtained. The corrosion resistances of the metals and ceramic materials were assessed from the change in weight. The chemical resistance of the enamel coating were determined from the loss of continuity of the coating by means of an IDS flaw detector. The corrosion rate of W, Mo, Ni, Ta, Cr, Zr, NMZhMts (28-1.5-2), KhN4510, N50Kh40Yu10, N60KH40, OKh15N65M16G3, OKh15N65M16V, N65M20V15, N65M19V16, N70M27F, and stainless steels Kh28Yu5, Kh28S2, Kh18N10T, Kh20N18Yu3, Kh25N20S2, and OKh23N28M3D3T in melts of these compositions exceeded 100g/m/sup 2/h. Ceramic of pure oxides, silicon carbide with a nitride binder, and silicified graphite are strongly impregnated by the melt, and may therefore crack with a sudden change in temperature. Cermet coating M1 disintegrated in places. Of the cermic materials tested the most stable are basalt ceramic and fluorphlogopite. Enamel coating 6S-12 has a low resistance, the surface became rough; enamel coating 15, Kh19-6, N-14-15, and N14-10 became porous.Enamels 8/2-72, 81A/sub 8/, and 81 are quite unstable in these melts at 500 to 550/sup 0/C. Enamel coatings 143/54-15, 143/54-50, 54, and 122 are the most stable in fused chlorides. These studies showed that none of the metallic materials tested can be used as a structural material in the chloride melts (%) KCl 39, NaCl 7 CaCl/sub 2/ 3.5, MgCl/sub 2/ 2.5, AlCl/sub 3/ 20, and FeCl/sub 3/ 28 and KCL 58-FeCl/sub 3/ 42 at 500 to 550/sup 0/C. Fluorphlogopite, basalt ceramic, and enamels 143/54-15, 143/54-50, 54, and 122 are recommended for pilot

  13. Friction loss in straight pipes of unplasticized polyvinyl chloride.

    Science.gov (United States)

    Iwasaki, T; Ojima, J

    1996-01-01

    In order to design proper ductwork for a local exhaust system, airflow characteristics were investigated in straight pipes of unplasticized polyvinyl chloride (PVC). A linear decrease in static pressure was observed downstream at points from the opening of the VU pipes (JIS K 6741) located at distances greater than 10 times the pipe diameter, for velocities ranging between 10.18-36.91 m/s. Roughness inside pipes with small diameters was found to be 0.0042-0.0056 mm and the friction factor was calculated on the basis of Colebrook's equation for an airflow transition zone. An extended friction chart was then constructed on the basis of the roughness value and the friction factor. This chart can be applied when designing a local exhaust system with the ducts of diameters ranging from 40 to 900 mm. The friction loss of the PVC pipe was found to be approximately 2/3 of that of a galvanized steel pipe.

  14. Preparation and characterization of organic polymer modified composite polyaluminum chloride

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Compared with traditional aluminum salts, polyaluminum chloride (PACl) has better coagulation-flocculation performance in turbidity removal. However, it is still inferior to organic polymers in terms of bridging function. In order to improve the aggregating property of PACl, different composite PACl flocculants were prepared with various organic polymers. The effect of organic polymer on the distribution of Al (Ⅲ) species in composite flocculants was studied using 27Al NMR and Al-ferron complexation methods. The charge neutralization and surface adsorption characteristics of composite flocculants were also investigated. Jar tests were conducted to evaluate the turbidity removal efficacy of organic polymer modified composite flocculants. The study shows that cationic polymer and anionic polymer have significant influences on the coagulation-flocculation behaviors of PACl. Both cationic and anionic polymers can improve the turbidity removal performance of PACl but the mechanisms are much different: cationic organic polymer mainly increases the charge neutralization ability, but anionic polymer mainly enhances the bridging function.

  15. Friction loss in straight pipes of unplasticized polyvinyl chloride.

    Science.gov (United States)

    Iwasaki, T; Ojima, J

    1996-01-01

    In order to design proper ductwork for a local exhaust system, airflow characteristics were investigated in straight pipes of unplasticized polyvinyl chloride (PVC). A linear decrease in static pressure was observed downstream at points from the opening of the VU pipes (JIS K 6741) located at distances greater than 10 times the pipe diameter, for velocities ranging between 10.18-36.91 m/s. Roughness inside pipes with small diameters was found to be 0.0042-0.0056 mm and the friction factor was calculated on the basis of Colebrook's equation for an airflow transition zone. An extended friction chart was then constructed on the basis of the roughness value and the friction factor. This chart can be applied when designing a local exhaust system with the ducts of diameters ranging from 40 to 900 mm. The friction loss of the PVC pipe was found to be approximately 2/3 of that of a galvanized steel pipe. PMID:8768669

  16. Influence of sodium chloride on the crystallization rate of gypsum

    Energy Technology Data Exchange (ETDEWEB)

    Brandse, W.P. (Univ. of Technology, Delft, Netherlands); van Rosmalen, G.M.; Brouwer, G.

    1977-01-01

    The growth kinetics of gypsum was studied in supersaturated solutions both in pure water and in the presence of NaCl, using a seeded growth technique. Radioactive tracer techniques were employed to follow the growth process. The mean linear growth rate R was plotted against the relative supersaturation sigma. For low sigma values the relation between R and sigma is given by a linear law, for higher sigma values by a parabolic law and for the highest sigma values by a growth ''order'' higher than two. It was shown that the addition of sodium chloride increased the crystallization rate remarkably. The higher the NaCl concentration the higher the growth rate.

  17. Nickel electrodeposition from leaching solution containing ammonia and chloride

    Institute of Scientific and Technical Information of China (English)

    郑国渠; 郑利峰; 曹华珍; 高志峰; 倪似愚; 张九渊

    2003-01-01

    The effects of temperature, nickel concentration and current density on the current efficiency and the e-lectrolyzer voltage were investigated in the process of electrowinning nickel. The results show that the current effi-ciency is above 90 % under the various experimental conditions, and the electrolyzer voltage is less than that of tradi-tional electrolyzer system. Therefore, the optimized parameters, i.e. temperature of 50 C, current density of 400A/m2 , are determined. It is also elucidated that anodic product is high valent nickel compound in the process of elec-trodeposition in terms of X-ray diffraction and chemical analysis. The amount of solid product formed on the elec-trode surface decreases with an increase in ammonium chloride concentration by cyclic voltammetry analysis. It is al-so indicated that the anodic gas species are mainly composed of nitrogen by vapor phase chromatograph.

  18. Thermodynamic properties of pentalead tris(vanadate) chloride

    Energy Technology Data Exchange (ETDEWEB)

    Knyazev, A.V., E-mail: knyazevav@gmail.com [Nizhny Novgorod State University, Gagarin Prospekt 23/2, Nizhny Novgorod 603950 (Russian Federation); Bulanov, E.N.; Smirnova, N.N.; Kuznetsova, N.Yu.; Letyanina, I.A.; Pryamova, E.D. [Nizhny Novgorod State University, Gagarin Prospekt 23/2, Nizhny Novgorod 603950 (Russian Federation)

    2011-03-10

    Graphical abstract: - Abstract: In the present work the temperature dependences of pentalead tris(vanadate) chloride heat capacity have been measured for the first time in the range from 7 to 350 K. The experimental data were used to calculate standard thermodynamic functions, namely the heat capacity C{sub p} {sup o} (T), enthalpy H{sup o}(T) - H{sup o}(0), entropy S{sup o}(T) - S{sup o}(0) and Gibbs function G{sup o}(T) - H{sup o}(0), for the range from T {yields} 0 to 350 K. The differential scanning calorimetry in temperature interval 298-1473 K was applied to measure temperatures of phase transition and melting of compound under study. The high-temperature X-ray diffraction in range 298-1073 K was used for the determining thermal expansion coefficients.

  19. Sodium Chloride Dihydrate - A Potential Cause of Slippery Accidents

    DEFF Research Database (Denmark)

    Mejlholm, Morten; Thomsen, Kaj; Rasmussen, Peter;

    of ice appearing to be resistant to road salt, a comparative study has been made on a number of different surfaces measuring the friction index. The friction measurements were performed with a Portable Skid-Resistance Tester. Discontinuous surfaces consisting of small islands of hydrohalite...... was classified as potentially slippery surfaces. It is therefore possible that the formation of hydrohalite contributes to accidents on slippery roads.......From a thermodynamic point of view, it can be expected that sodium chloride dihydrate (hydrohalite, NaCl2H2O) will form on winter roads under certain conditions at temperatures below 0.1¢®C. In order to elucidate whether or not the formation of hydrohalite on the pavement can explain the phenomenon...

  20. The Influence of Additives on Crystallization of Polyvinyl Chloride

    Institute of Scientific and Technical Information of China (English)

    LIU Yaqun; ZHANG Chaocan

    2007-01-01

    Acetanilide, adipic acid and potassium hydrogen phthalate were chosen as nucleating agents of polyvinyl chloride(PVC), and their effects on PVC crystallization were studied by differential scanning calorimetry, wide angle X-ray diffraction and fourier transform infrared spectroscopy. The experimental results indicate that all of the three additives are compatible with PVC to some extent, but adipic acid's compatibility with PVC is less satisfactory. The three additives can improve PVC crystallinity, and acetanilide can decrease PVC glass transition temperature(Tg)and narrow PVC melting range, while adipic acid and potassium hydrogen phthalate rise Tg of PVC and widen its melting range. All additives do not affect PVC crystal system and all samples are in orthorhombic system. All additives can improve (200), (110), (210) and (201, 111) planes growing. Moreover, acetanilide and adipic acid can shrink PVC spacings and improve the crystal perfection of PVC, but potassium hydrogen phthalate swells spacings and reduces the perfection of PVC crystal.

  1. Reactivity Ratios of Diethyldiallylammonium Chloride with Acrylamide or Acrylic Acid

    Institute of Scientific and Technical Information of China (English)

    Li Hua LIU; Zhi Qiang LIU; Zhu Qing GONG

    2006-01-01

    The compositions of copolymers of diethyldiallylammonium chloride (DEDAAC) with acrylamide (AM), acrylic acid (AA) or sodium acrylic acid (NaAA) at low conversion were determined by elemental analysis, and the reactivity ratios of monomers in copolymerization were obtained by Kelen-Tudos method. The results showed that the reactivity ratios rDE and rAM are 0.31 and 5.27 for DEDAAC with AM, rDE and rAA are 0.28 and 5.15 for DEDAAC with AA, and rDE and rNaAA are 0.40 and 3.97 for DEDAAC with NaAA, respectively. The copolymerizations for DEDAAC with AM, AA or NaAA are non-ideal copolymerization and the products are random copolymers.

  2. Hibiscus sabdariffa Affects Ammonium Chloride-Induced Hyperammonemic Rats

    Directory of Open Access Journals (Sweden)

    M. Mohamed Essa

    2007-01-01

    Full Text Available Hibiscus sabdariffa (HS is an edible medicinal plant, indigenous to India, China and Thailand and is used in Ayurveda and traditional medicine. Alcoholic extract of HS leaves (HSEt was studied for its anti-hyperammonemic and antioxidant effects in brain tissues of ammonium chloride-induced hyperammonemic rats. Oral administration of HSEt (250 mg kg−1 body weight significantly normalizes the levels of ammonia, urea, uric acid, creatinine and non-protein nitrogen in the blood. HSEt significantly reduced brain levels of lipid peroxidation products such as thiobarbituric acid and reactive substances (TBARS and hydroperoxides (HP. However, the administered extract significantly increased the levels of antioxidants such as catalase (CAT, superoxide dismutase (SOD, glutathione peroxidase (GPx and reduced glutathione (GSH in brain tissues of hyperammonemic rats. This investigation demonstrates significant anti-hyperammonemic and antioxidant activity of HS.

  3. Strong and specific effects of cations on lysozyme chloride solubility.

    Science.gov (United States)

    Bénas, Philippe; Legrand, Laurent; Riès-Kautt, Madeleine

    2002-10-01

    The influence of salt nature and concentration on tetragonal lysozyme chloride crystal solubility is presented for a set of mono-, di- and trivalent cations (Cs(+), Rb(+), Mn(2+), Co(2+) and Yb(3+)). The results show that cations have as strong an effect on protein solubility as anions and that they present their own particular effects as co-ions. Indeed, after decreasing at low ionic strength, lysozyme solubility increases with high concentration of polyvalent cations, probably due to co-ion binding and therefore the concomitant increase of the net charge of the protein-salt complex. These new results are discussed in order to progress in the understanding of the crystallisation process at the atomic level. PMID:12351866

  4. Sodium Chloride, NaCl/ϵ: New Force Field.

    Science.gov (United States)

    Fuentes-Azcatl, Raúl; Barbosa, Marcia C

    2016-03-10

    A new computational model for sodium chloride, the NaCl/ϵ, is proposed. The force field employed for the description of the NaCl is based on a set of radial particle-particle pair potentials involving Lennard-Jones (LJ) and Coulombic forces. The parametrization is obtained by fitting the density of the crystal and the density and the dielectric constant of the mixture of the salt with water at a diluted solution. Our model shows good agreement with the experimental values for the density and for the surface tension of the pure system, and for the density, the viscosity, the diffusion, and the dielectric constant for the mixture with water at various molal concentrations. The NaCl/ϵ together with the water TIP4P/ϵ models provide a good approximation for studying electrolyte solutions. PMID:26890321

  5. Biotransformation of Tributyltin chloride by Pseudomonas stutzeri strain DN2

    Directory of Open Access Journals (Sweden)

    Dnyanada S. Khanolkar

    2014-12-01

    Full Text Available A bacterial isolate capable of utilizing tributyltin chloride (TBTCl as sole carbon source was isolated from estuarine sediments of west coast of India and identified as Pseudomonas stutzeri based on biochemical tests and Fatty acid methyl ester (FAME analysis. This isolate was designated as strain DN2. Although this bacterial isolate could resist up to 3 mM TBTCl level, it showed maximum growth at 2 mM TBTCl in mineral salt medium (MSM. Pseudomonas stutzeri DN2 exposed to 2 mM TBTCl revealed significant alteration in cell morphology as elongation and shrinkage in cell size along with roughness of cell surface. FTIR and NMR analysis of TBTCl degradation product extracted using chloroform and purified using column chromatography clearly revealed biotransformation of TBTCl into Dibutyltin dichloride (DBTCl2 through debutylation process. Therefore, Pseudomonas stutzeri strain DN2 may be used as a potential bacterial strain for bioremediation of TBTCl contaminated aquatic environmental sites.

  6. Corrosion of LY12 aluminum alloy in sodium chloride solution

    Institute of Scientific and Technical Information of China (English)

    程英亮; 张昭; 曹发和; 李劲风; 张鉴清; 王建明; 曹楚南

    2003-01-01

    The corrosion behavior of LY12 alloy in sodium chloride solution and its electrochemical noise were reported. The development of the micro-pits on the alloy surface was monitored by scanning electron microscopy, scanning tunneling microscopy, and electrochemical noise method. All the measurements show that the corrosion of LY12 alloy can be divided into two stages: a very reactive initial stage and a relative constant stable stage. The initial stage is corresponded to the adsorption of Cl ions and its reaction with the oxide film and the dissolution of Mg containing particles. The stable stage is corresponded to the development of the micro-pits by the galvanic attack formed by Al-Fe-Cu-Mn containing particles and the matrix. The initial stage lasts about 2-3 h while the stable stage dominates the whole corrosion process.

  7. Sulfonated polyvinyl chloride fibers for cation-exchange microextraction.

    Science.gov (United States)

    Xu, Li; Lee, Hian Kee

    2009-09-18

    Polyvinyl chloride (PVC) fiber was derivatized by concentrated sulfuric acid to yield sulfonated PVC (PVC-SO3H). The PVC-SO3H fiber had dual properties as a sorbent, based on cation-exchange and hydrophobicity. In the present study, the novel fiber was used directly as an individual device for extraction purposes in the cation-exchange microextraction of anaesthetics, followed by high-performance liquid chromatography-UV analysis. The results demonstrated that this PVC-SO3H fiber-based microextraction afforded convenient operation and cost-effective application to basic analytes. The limits of detection for four anaesthetics ranged from 1.2 to 6.0 ng/mL. No carryover (because of its disposable usage), and no loss of sorbent phase (which normally occurs in stir-bar sorptive extraction) during extraction were observed.

  8. [Test method for 6 phthalates in polyvinyl chloride].

    Science.gov (United States)

    Abe, Yutaka; Mutsuga, Motoh; Hirahara, Yoshichika; Kawamura, Yoko

    2011-01-01

    A test method for 6 phthalates, bis(2-ethylhexyl)phthalate, dibutyl phthalate, benzyl butyl phthalate, diisononyl phthalate, diisodecyl phthalate and di-n-octyl phthalate, in polyvinyl chloride (PVC) was developed. GC/MS was used in the SIM mode for the separation and detection of phthalates. For preparation of the test solution, the extraction method with acetone-hexane mixture (3 : 7) and the dissolution method with tetrahydrofuran and ethanol were compared and it was confirmed that each method gave good recoveries. Dilution of the test solution was effective to reduce the influence of PVC. In a collaborative study with nine laboratories, the intra-laboratory variations showed good repeatability, but the measurements at some laboratories deviated widely. It appears that this method is unsuitable for the judgment of acceptability, but it may be suitable for the determination of phthalate content in PVC products.

  9. Electrochemical impedance spectroscopy study on corrosion inhibition of benzyltriethylammonium chloride

    Science.gov (United States)

    Idris, Mohd Nazri; Daud, Abdul Razak; Othman, Norinsan Kamil

    2013-11-01

    Electrochemical Impedance Spectroscopy (EIS) was employed to study the corrosion inhibition behavior of benzyltriethylammonium chloride (BTC) for carbon steel corrosion. The inhibition efficiency was investigated in 1.0 M HCl solution at room temperature (25°C) by varying the BTC concentration. EIS results indicated that the double layer capacitance of electrolyte/carbon steel interface decreases with the increasing of BTC concentration and consequently enhances the polarization resistance of equivalence Randles circuit. The results indicated that inhibition efficiency of as high as 65% could be achieved when 10mM BTC was present in 1.0 M HCl solution as compared to inhibitor-free solution. The inhibition process of BTC on the carbon steel corrosion was found to obey Langmuir adsorption isotherm. This study revealed that BTC is suitable to be used as a corrosion inhibitor in acid media.

  10. Fast reactors using molten chloride salts as fuel

    International Nuclear Information System (INIS)

    This report deals with a rather exotic ''paper reactor'' in which the fuel is in the form of molten chlorides. (a) Fast breeder reactor with a mixed fuel cycle of thorium/uranium-233 and uranium 238/plutonium in which all of the plutonium can be burned in situ and in which a denatured mixture of uranium-233 and uranium-238 is used to supply further reactors. The breeding ratio is relatively high, 1.58 and the specific power is 0.75 GW(th)/m3 of core. (b) Fast breeder reactor with two and three zones (internal fertile zone, intermediate fuel zone, external fertile zone) with an extremely high breeding ratio of 1.75 and a specific power of 1.1 GW(th)/m3 of core. (c) Extremely high flux reactor for the transmutation of the fission products: strontium-90 and caesium-137. The efficiency of transmutation is approximately 15 times greater than the spontaneous beta decay. This high flux burner reactor is intended as part of a complex breeder/burner system. (d) Internally cooled fast breeder in which the cooling agent is the molten fertile material, the same as in the blanket zone. This reactor has a moderate breeding ratio of 1.38, a specific power of 0.22 GW(th)/m3 of core and very good inherent safety properties. All of these reactors have the fuel in the form of molten chlorides: PuCl3 as fissile, UCl3 as fertile (if needed) and NaCl as dilutent. The fertile material can be 238UCl3 as fertile and NaCl as dilutent. In mixed fuel cycles the 233UCl3 is also a fissile component with 232ThCl4 as the fertile constituent

  11. [Polymethoxylated flavonoids activate cystic fibrosis transmembrane conductance regulator chloride channel].

    Science.gov (United States)

    Cao, Huan-Huan; Fang, Fang; Yu, Bo; Luan, Jian; Jiang, Yu; Yang, Hong

    2015-04-25

    Cystic fibrosis transmembrane conductance regulator (CFTR), a cAMP-dependent chloride channel, plays key roles in fluid secretion in serous epithelial cells. Previously, we identified two polymethoxylated flavonoids, 3',4',5,5',6,7-hexamethoxyflavone (HMF) and 5-hydroxy-6,7,3',4'-tetramethoxyflavone (HTF) which could potentiate CFTR chloride channel activities. The present study was aimed to investigate the potentiation effects of HMF and HTF on CFTR Cl(-) channel activities by using a cell-based fluorescence assay and the short circuit Ussing chamber assay. The results of cell-based fluorescence assay showed that both HMF and HTF could dose-dependently potentiate CFTR Cl(-) channel activities in rapid and reversible ways, and the activations could be reversed by the CFTR blocker CFTRinh-172. Notably, HMF showed the highest affinity (EC50 = 2 μmol/L) to CFTR protein among the flavonoid CFTR activators identified so far. The activation of CFTR by HMF or HTF was forskolin (FSK) dependent. Both compounds showed additive effect with FSK and 3-Isobutyl-1-methylx (IBMX) in the activation of CFTR, while had no additive effect with genistein (GEN). In ex vivo studies, HMF and HTF could stimulate transepithelial Cl(-) secretion in rat colonic mucosa and enhance fluid secretion in mouse trachea submucosal glands. These results suggest that HMF and HTF may potentiate CFTR Cl(-) channel activities through both elevation of cAMP level and binding to CFTR protein pathways. The results provide new clues in elucidating structure and activity relationship of flavonoid CFTR activators. HMF might be developed as a new drug in the therapy of CFTR-related diseases such as bronchiectasis and habitual constipation. PMID:25896054

  12. Effect of kaolin treatment temperature on mortar chloride permeability

    Directory of Open Access Journals (Sweden)

    Puertas, F.

    2007-03-01

    Full Text Available The present paper discusses the results of chloride resistance tests conducted on ordinary Portland cement (OPC mortars containing a Colombian kaolin pre-treated at temperatures of from 600 to 800 ºC. The resulting metakaolin (MK was added to OPC mortar mixes in proportions of 10 and 20% by cement weight. The mortars were compared for physical and chemical properties, including capillary absorption, chloride permeability and pore microstructure as assessed by mercury porosimetry. The best performance was recorded for the samples containing 20% of the material treated at 800 ºC.En el presente trabajo se incluyen los resultados de la resistencia a la penetración de cloruros de morteros de Cemento Portland Ordinario (OPC adicionados con un caolín colombiano sometido a tratamiento térmico en un rango de temperaturas entre 600 y 800 °C. Los productos del tratamiento térmico, metacaolín (MK, son incorporados en mezclas de morteros de OPC en proporciones del 10 y 20% en relación al peso del cemento. Se comparan sus características físico-químicas, entre las cuales se incluye la microestructura de poros evaluada por la técnica de porosimetría de mercurio, con la absorción capilar y la permeabilidad a cloruros. Se concluye que las muestras adicionadas con un 20% del material tratado térmicamente a 800 °C presentan el mejor desempeño en sus propiedades finales.

  13. Iron-Catalyzed Acylation of Polyfunctionalized Aryl- and Benzylzinc Halides with Acid Chlorides.

    Science.gov (United States)

    Benischke, Andreas D; Leroux, Marcel; Knoll, Irina; Knochel, Paul

    2016-08-01

    FeCl2 (5 mol %) catalyzes a smooth and convenient acylation of functionalized arylzinc halides at 50 °C (2-4 h) and benzylic zinc chlorides at 25 °C (0.5-4 h) with a variety of acid chlorides leading to polyfunctionalized diaryl and aryl heteroaryl ketones. PMID:27457108

  14. Simulation of Chloride Diffusion in Cracked Concrete with Different Crack Patterns

    Directory of Open Access Journals (Sweden)

    Xiao-Yong Wang

    2016-01-01

    Full Text Available Chloride-induced corrosion of steel rebar is one of the primary durability problems for reinforced concrete structures in marine environment. Furthermore, if the surfaces of concrete structures have cracks, additional chloride can penetrate into concrete through cracked zone. For chloride ingression into cracked concrete, former researches mainly focus on influence of crack width on chloride diffusion coefficients. Other crack characteristics, such as chloride depth, crack shape (equal-width crack or tapered crack, crack density, and spacing, are not studied in detail. To fill this gap, this paper presents a numerical procedure to simulate chloride ingression into cracked concrete with different crack geometry characteristics. Cracked concrete is divided into two parts, sound zone and cracked zone. For stress-free concrete, the diffusion coefficient of sound zone is approximately assumed to be the same as sound concrete, and the diffusion coefficient of cracked zone is expressed as a piecewise function of crack width. Two-dimensional finite element method is used to determine chloride concentration. It is found that, with the increasing of crack width, crack depth, and crack amount, chloride ingression will aggravate. The analysis results generally agree with experimental results.

  15. The LB Films of Dansyl Chloride Labeled Octadecylamine and Its Fluorescence Lifetime

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Octadecylamine was derivatized with dansyl chloride (5-dimethylaminonaphthalene-1-sulfonyl chloride) in order to simplify and understand the LB films of fluorescent probe labeling proteins.Its monolayer and multilayers in the absence and presence of stearic acid were deposited by LB technique.Fluorescence spectra and lifetimes of the fluorescent products were studied to elucidate the microenvironment of molecules in the LB films.

  16. Oxidative addition of aryl chlorides to monoligated palladium(0): A DFT-SCRF study

    DEFF Research Database (Denmark)

    Ahlquist, Mårten Sten Gösta; Norrby, Per-Ola

    2007-01-01

    Oxidative addition of aryl chlorides to palladium has been investigated by hybrid density functional theory methods (B3LYP), including a continuum model describing the solvent implicitly. A series of para-substituted aryl chlorides were studied to see the influence of electronic effects on the...

  17. Sythesis of rare earth metal - GIC graphite intercalation compound in molten chloride system

    Energy Technology Data Exchange (ETDEWEB)

    Ito, Masafumi; Hagiwara, Rika; Ito, Yasuhiko [Kyoto Univ. (Japan). Faculty of Engineering

    1994-07-01

    Graphite intercalation compounds of ytterbium and neodymium have been prepared by interacting graphite and metals in molten chlorides. These rare earth metals can be suspended in molten chlorides in the presence of trichlorides via disproportionation reaction RE(0) + RE(III) = 2RE(II) at lower than 300 degC. Carbides-free compounds are obtained in these systems. (author).

  18. Chloride Ion Transport in Fly Ash Mortar under Action of Fatigue Loading

    Institute of Scientific and Technical Information of China (English)

    WANG Caihui; SUN Wei; JIANG Jinyang

    2012-01-01

    In order to study the chloride ion transport performance in fly ash addition mortar,a new method,in which the fatigue loading and chloride diffusion are undertaken simultaneously,was developed.This method realizes coupling the fatigue damage process and the process of chloride transporting of fly ash mortar.The transport performance of chloride in fly ash mortar specimens was studied under different stress levels.Moreover,the effect of fly ash content on transport performance of chloride ion in mortar was investigated.AE (Acoustic Emission) and SEM were used to acquire the damage distribution of mortar specimens under action of fatigue load.The results show that the diffusion coefficient of chloride in mortar specimens increases with stress level of fatigue loading.The addition of fly ash can mitigate the penetration of chloride ion.The results of microcrack 3D location acquired by AE,accompanied with crack characterizing from SEM,indicate that the damage degree of mortar specimen increases with stress level of fatigue loading.Furthermore,higher damage degree of mortar leads to more the chloride ion content in the sample.

  19. Manipulation of a Schlenk Line: Preparation of Tetrahydrofuran Complexes of Transition-Metal Chlorides

    Science.gov (United States)

    Davis, Craig M.; Curran, Kelly A.

    2007-01-01

    Before taking an inorganic laboratory course few students have experience handling air-sensitive materials using Schlenk techniques. This exercise introduces them to techniques they will employ in later syntheses. The procedure involves the formation of anhydrous tetrahydrofuran complexes of transition-metal chlorides from metal-chloride hydrates;…

  20. 21 CFR 177.2000 - Vinylidene chloride/methyl acrylate/methyl methacrylate polymers.

    Science.gov (United States)

    2010-04-01

    ... methacrylate polymers. 177.2000 Section 177.2000 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF...: POLYMERS Substances for Use as Basic Components of Single and Repeated Use Food Contact Surfaces § 177.2000 Vinylidene chloride/methyl acrylate/methyl methacrylate polymers. The vinylidene chloride/methyl...