WorldWideScience

Sample records for chloride oxoselenatesiv mclseo3

  1. Chloride ingress prediction

    DEFF Research Database (Denmark)

    Frederiksen, Jens Mejer; Geiker, Mette Rica

    2008-01-01

    Prediction of chloride ingress into concrete is an important part of durability design of reinforced concrete structures exposed to chloride containing environment. This paper presents experimentally based design parameters for Portland cement concretes with and without silica fume and fly ash in...

  2. Chloride ingress prediction

    DEFF Research Database (Denmark)

    Frederiksen, Jens Mejer; Geiker, Mette Rica

    2008-01-01

    makes physical sense for the design engineer, i.e. the achieved chloride diffusion coefficients at 1 year and 100 years, D1 and D100 respectively, and the corresponding achieved chloride concentrations at the exposed concrete surface, C1 and C100. Data from field exposure supports the assumption of time...... dependent surface chloride concentrations and the diffusion coefficients. Model parameters for Portland cement concretes with and without silica fume and fly ash in marine atmospheric and submerged South Scandinavian environment are suggested in a companion paper based on 10 years field exposure data....

  3. Chloride removal from vitrification offgas

    International Nuclear Information System (INIS)

    This study identified and investigated techniques of selectively purging chlorides from the low-level waste (LLW) vitrification process with the purge stream acceptable for burial on the Hanford Site. Chlorides will be present in high concentration in several individual feeds to the LLW Vitrification Plant. The chlorides are highly volatile in combustion type melters and are readily absorbed by wet scrubbing of the melter offgas. The Tank Waste Remediation System (TWRS) process flow sheets show that the resulting chloride rich scrub solution is recycled back to the melter. The chlorides must be purged from the recycle loop to prevent the buildup of excessively high chloride concentrations

  4. [Degradation of succinylcholine chloride].

    Science.gov (United States)

    Németh, G; Török, I; Paál, T

    1993-05-01

    Quantitative thin-layer chormatographic method has been developed for the investigation of the degradation of injection formulations containing succinylcholinium chloride. The method is based on the denistometric determination of the main degradation product, choline at 430 nm after visualization with iodine vapour. The stability of the injection was investigated under various storage conditions and it has been stated that considerable decomposition takes place during as short a period as one week. PMID:8362654

  5. Valyl benzyl ester chloride

    Directory of Open Access Journals (Sweden)

    Grzegorz Dutkiewicz

    2010-02-01

    Full Text Available In the title compound (systematic name: 1-benzyloxy-3-methyl-1-oxobutan-2-aminium chloride, C12H18NO2+·Cl−, the ester group is approximately planar, with a maximum deviation of 0.040 (2 Å from the least-squares plane, and makes a dihedral angle of 28.92 (16° with the phenyl ring. The crystal structure is organized by N—H...Cl hydrogen bonds which join the two components into a chain along the b axis. Pairs of chains arranged antiparallel are interconnected by further N—H...Cl hydrogen bonds, forming eight-membered rings. Similar packing modes have been observed in a number of amino acid ester halides with a short unit-cell parameter of ca 5.5 Å along the direction in which the chains run.

  6. 40 CFR 61.65 - Emission standard for ethylene dichloride, vinyl chloride and polyvinyl chloride plants.

    Science.gov (United States)

    2010-07-01

    ... dichloride, vinyl chloride and polyvinyl chloride plants. 61.65 Section 61.65 Protection of Environment... dichloride, vinyl chloride and polyvinyl chloride plants. An owner or operator of an ethylene dichloride, vinyl chloride, and/or polyvinyl chloride plant shall comply with the requirements of this section....

  7. Sodium chloride, potassium chloride, and virulence in Listeria monocytogenes.

    OpenAIRE

    MYERS, E. R.; Dallmier, A W; Martin, S E

    1993-01-01

    Virulence, as determined in a mouse model, and the virulence factor activities of catalase, superoxide dismutase, and listeriolysin O were examined in a parental strain (10403S) and in a nonhemolytic mutant strain (DP-L224) of Listeria monocytogenes. The cells were propagated in media containing various concentrations of sodium chloride or potassium chloride. Strains 10403S and DP-L224 exhibited significant increases in catalase activity and listeriolysin O activity when grown in medium conta...

  8. Chloride channels in stroke

    Institute of Scientific and Technical Information of China (English)

    Ya-ping ZHANG; Hao ZHANG; Dayue Darrel DUAN

    2013-01-01

    Vascular remodeling of cerebral arterioles,including proliferation,migration,and apoptosis of vascular smooth muscle cells (VSMCs),is the major cause of changes in the cross-sectional area and diameter of the arteries and sudden interruption of blood flow or hemorrhage in the brain,ie,stroke.Accumulating evidence strongly supports an important role for chloride (Clˉ) channels in vascular remodeling and stroke.At least three Clˉ channel genes are expressed in VSMCs:1) the TMEM16A (or Ano1),which may encode the calcium-activated Clˉ channels (CACCs); 2) the CLC-3 Clˉ channel and Clˉ/H+ antiporter,which is closely related to the volume-regulated Clˉ channels (VRCCs); and 3) the cystic fibrosis transmembrane conductance regulator (CFTR),which encodes the PKA-and PKC-activated Clˉ channels.Activation of the CACCs by agonist-induced increase in intracellular Ca2+ causes membrane depolarization,vasoconstriction,and inhibition of VSMC proliferation.Activation of VRCCs by cell volume increase or membrane stretch promotes the production of reactive oxygen species,induces proliferation and inhibits apoptosis of VSMCs.Activation of CFTR inhibits oxidative stress and may prevent the development of hypertension.In addition,Clˉ current mediated by gammaaminobutyric acid (GABA) receptor has also been implicated a role in ischemic neuron death.This review focuses on the functional roles of Clˉ channels in the development of stroke and provides a perspective on the future directions for research and the potential to develop Clˉ channels as new targets for the prevention and treatment of stroke.

  9. Stability of succinylcholine chloride injection.

    Science.gov (United States)

    Schmutz, C W; Mühlebach, S F

    1991-03-01

    The stability of succinylcholine chloride injection prepared by a hospital pharmacy was studied under a wide variety of conditions. Batches of succinylcholine chloride injection 10 mg/mL containing sodium chloride, methyl-4-hydroxybenzoate, hydrochloric acid, and water were prepared. Samples were tested for the effect of initial pH (3.0 and 4.2) and sterilization (steam treatment at 100 degrees C for 30 minutes and 121 degrees C for 20 minutes) on stability after three weeks; long-term stability under refrigeration (12, 17, and 23 months of storage at 4 degrees C); and the effect of storage temperature (4-6 degrees C, 20-26 degrees C, 35 degrees C, and 70 degrees C) and light exposure at various intervals up to 12 months. Samples were analyzed by thin-layer chromatography (TLC) and high-performance liquid chromatography (HPLC). Unlike heating at 121 degrees C, heating at 100 degrees C produced no significant loss of succinylcholine chloride, independent of the initial pH. Succinylcholine chloride was hydrolyzed only minimally over 23 months if the solution was stored at 4-6 degrees C. A 10% loss of drug content occurred if solutions were kept at 20-26 degrees C for five months, at 35 degrees C for one month, or at 70 degrees C for one day. Initial degradation was slowed if the solution was protected from light. The assessments by TLC proved to be more sensitive than the HPLC measurements. Succinylcholine chloride injection sterilized at 100 degrees C for 30 minutes can be stored for up to five months at room temperature if protected from light. The preparation is stable for at least two years under refrigeration. PMID:2028996

  10. Chloride in vesicular trafficking and function.

    Science.gov (United States)

    Stauber, Tobias; Jentsch, Thomas J

    2013-01-01

    Luminal acidification is of pivotal importance for the physiology of the secretory and endocytic pathways and its diverse trafficking events. Acidification by the proton-pumping V-ATPase requires charge compensation by counterion currents that are commonly attributed to chloride. The molecular identification of intracellular chloride transporters and the improvement of methodologies for measuring intraorganellar pH and chloride have facilitated the investigation of the physiology of vesicular chloride transport. New data question the requirement of chloride for pH regulation of various organelles and furthermore ascribe functions to chloride that are beyond merely electrically shunting the proton pump. This review surveys the currently established and proposed intracellular chloride transporters and gives an overview of membrane-trafficking steps that are affected by the perturbation of chloride transport. Finally, potential mechanisms of membrane-trafficking modulation by chloride are discussed and put into the context of organellar ion homeostasis in general. PMID:23092411

  11. Electrochemical Chloride extraction using external electrodes?

    DEFF Research Database (Denmark)

    Ottosen, Lisbeth M.; Pedersen, Anne Juul

    2006-01-01

    Electrochemical methods for the removal of chloride from concrete have been developed and the methods are primarily designed for situations where corrosion has started due to an increased chloride concentration in the vicinity of the reinforcement. In these methods the reinforcement is used...... as the cathode. However, some unwanted side effects can occur, including alkali-silica reaction and in some cases hydrogen embrittlement. It is also suggested also to use electrochemical chloride extraction in a preventive way in constructions where chloride induced corrosion is likely to be a problem after...... a period of time, i.e. remove the chlorides before the chloride front reaches the reinforcement. If the chlorides are removed from outer few centimetres from the surface, the chloride will not reach the reinforcement and cause damage. By using the electrochemical chloride removal in this preventive way...

  12. Chloride binding of cement-based materials subjected to external chloride environment - A review

    OpenAIRE

    Yuan, Q.; Shi, C; Schutter, G. de; Audenaert, K.; Deng, D.

    2009-01-01

    This paper reviews the chloride binding of cement-based materials subjected to external chloride environments. Chloride ion exist either in the pore solution, chemically bound to the hydration products, or physically held to the surface of the hydration products. Chloride binding of cement-based material is very complicated and influenced by many factors, such as chloride concentration, cement composition, hydroxyl concentration, cation of chloride salt, temperature, supplementary cementing m...

  13. 1,5-Diaminotetrazolium chloride

    Directory of Open Access Journals (Sweden)

    Ling-Qiao Meng

    2010-04-01

    Full Text Available The title compound, CH5N6+·Cl−, crystallized with two indepedent 1,5-diaminotetrazolium cations and two independent chloride anions in the asymmetric unit. In the crystal, there are a number of N—H...Cl hydrogen-bonding interactions, which generate a three-dimensional network.

  14. Chloride : The queen of electrolytes?

    NARCIS (Netherlands)

    Berend, Kenrick; van Hulsteijn, Leonard Hendrik; Gans, Rijk O. B.

    2012-01-01

    Background: Channelopathies, defined as diseases that are caused by mutations in genes encoding ion channels, are associated with a wide variety of symptoms and have been documented extensively over the past decade. In contrast, despite the important role of chloride in serum, textbooks in general d

  15. Microbial reductive dehalogenation of vinyl chloride

    Energy Technology Data Exchange (ETDEWEB)

    Spormann, Alfred M [Stanford, CA; Muller, Jochen A [Baltimore, MD; Rosner, Bettina M [Berlin, DE; Von Abendroth, Gregory [Mannheim, DE; Meshulam-Simon, Galit [Los Angeles, CA; McCarty, Perry L [Stanford, CA

    2014-02-11

    Compositions and methods are provided that relate to the bioremediation of chlorinated ethenes, particularly the bioremediation of vinyl chloride by Dehalococcoides-like organisms. An isolated strain of bacteria, Dehalococcoides sp. strain VS, that metabolizes vinyl chloride is provided; the genetic sequence of the enzyme responsible for vinyl chloride dehalogenation; methods of assessing the capability of endogenous organisms at an environmental site to metabolize vinyl chloride; and a method of using the strains of the invention for bioremediation.

  16. Progress of Carbonation in Chloride Contaminated Concretes

    OpenAIRE

    Wang, Yaocheng; Basheer, P.A.M.; Nanukuttan, S; Bai, Y.

    2016-01-01

    Concretes used in marine environment are generally under the cyclic effect of CO2 and chloride ions (Cl-). To date, the influence of carbonation on ingress of chloride ions in concretes has been widely studied; in comparison, study on the influence of Cl- on the progress of carbonation is limited. During the study, concretes were exposed to independent and combined mechanisms of carbonation and chloride ingress regimes. Profiles of apparent pH and chloride concentration were used to indicate ...

  17. Chloride sublimation of gold-arsenic concentrates

    International Nuclear Information System (INIS)

    Present article is devoted to chloride sublimation of gold-arsenic concentrates. The results of studies of chloride sublimation of gold-arsenic comprising concentrates of Chore deposit of Tajikistan are considered. It is found that by application sodium chloride for gold-arsenic comprising concentrates it is possible to extract gold and silver from flotation concentrates.

  18. 21 CFR 172.180 - Stannous chloride.

    Science.gov (United States)

    2010-04-01

    ... Preservatives § 172.180 Stannous chloride. The food additive stannous chloride may be safely used for color... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Stannous chloride. 172.180 Section 172.180 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR...

  19. Shock compression of polyvinyl chloride

    Science.gov (United States)

    Neogi, Anupam; Mitra, Nilanjan

    2016-04-01

    This study presents shock compression simulation of atactic polyvinyl chloride (PVC) using ab-initio and classical molecular dynamics. The manuscript also identifies the limits of applicability of classical molecular dynamics based shock compression simulation for PVC. The mechanism of bond dissociation under shock loading and its progression is demonstrated in this manuscript using the density functional theory based molecular dynamics simulations. The rate of dissociation of different bonds at different shock velocities is also presented in this manuscript.

  20. Simple chloride sensors for continuous groundwater monitoring

    DEFF Research Database (Denmark)

    Thorn, Paul; Mortensen, John

    2012-01-01

    The development of chloride sensors which can be used for continuous, on-line monitoring of groundwater could be very valuable in the management of our coastal water resources. However, sensor stability, drift, and durability all need to be addressed in order for the sensors to be used...... in continuous application. This study looks at the development of a simple, inexpensive chloride electrode, and evaluates its performance under continuous use, both in the laboratory and in a field test in a monitoring well. The results from the study showed a consistent response to changing chloride...... sensor remained responsive even at low chloride concentrations, where the conductivity electrode was no longer responding to changing chloride levels. With the results, it is believed that the simple chloride sensor could be used for continuous monitoring of groundwater quality....

  1. ENVIRONMENTAL EXPOSURE TO VINYL CHLORIDE

    Directory of Open Access Journals (Sweden)

    Henryka Langauer-Lewowicka

    2010-09-01

    Full Text Available Vinyl chloride (VC monomer is a wellknown carcinogenic and mutagenic substance causes liver damages, angiosarcoma of the liver, acro – osteolysis, sclerodermalike changes in workers chronically exposed to this gas. There are following VC emitors to the environment: VC production plants, polymerization facilities and planes where polyvinyl products are fabricated. Because of that, the general population is coming into VC contact through polluted air, food and water. VC concentration in all mentioned sites is very low, often not detectable. There was found any health risk for the general population. The VC air concentration in the vicinity to antropogenic emitors is always higher. Such a situation may causes undesirable health effect for residents living in the neighbourhood. Epidemiological studies are performed to detect the adverse VC effect in selected cohorts. Non of the study did not confirmed cases of angiosarcoma among residents living near a vinyl chloride sites. VC production is growing permanently, so VC emission will be higher. Because of that health monitoring of general population and especially of selected groups seems to be necessary in the future.

  2. Green process to recover magnesium chloride from residue solution of potassium chloride production plant

    Institute of Scientific and Technical Information of China (English)

    Lin WANG; Yunliang HE; Yanfei WANG; Ying BAO; Jingkang WANG

    2008-01-01

    The green process to recover magnesium chlor-ide from the residue solution of a potassium chloride pro-duction plant, which comes from the leach solution of a potash mine in Laos, is designed and optimized. The res-idue solution contains magnesium chloride above 25 wt-%, potassium chloride and sodium chloride together below 5 wt-% and a few other ions such as Br-, SO2-4and Ca2+. The recovery process contains two steps: the previous impurity removal operation and the two-stage evapora-tion-cooling crystallization procedure to produce magnes-ium chloride. The crystallized impurity carnallite obtained from the first step is recycled to the potassium chloride plant to recover the potassium salt. The developed process is a zero discharge one and thus fulfills the requirements for green chemical industrial production. The produced magnesium chloride is up to industrial criteria.

  3. Influence of Chloride-Ion Adsorption Agent on Chloride Ions in Concrete and Mortar

    OpenAIRE

    Gai-Fei Peng; Nai-Qian Feng; Qi-Ming Song

    2014-01-01

    The influence of a chloride-ion adsorption agent (Cl agent in short), composed of zeolite, calcium aluminate hydrate and calcium nitrite, on the ingress of chloride ions into concrete and mortar has been experimentally studied. The permeability of concrete was measured, and the chloride ion content in mortar was tested. The experimental results reveal that the Cl agent could adsorb chloride ions effectively, which had penetrated into concrete and mortar. When the Cl agent was used at a dosage...

  4. Factors influencing chloride deposition in a coastal hilly area and application to chloride deposition mapping

    OpenAIRE

    H. Guan; Love, A. J.; C. T. Simmons; Makhnin, O.; A. S. Kayaalp

    2010-01-01

    Chloride is commonly used as an environmental tracer for studying water flow and solute transport in the environment. It is especially useful for estimating groundwater recharge based on the commonly used chloride mass balance (CMB) method. Strong spatial variability in chloride deposition in coastal areas is one difficulty encountered in appropriately applying the method. A high-resolution bulk chloride deposition map in the coastal region is thus needed. The aim of this study is to construc...

  5. Factors influencing chloride deposition in a coastal hilly area and application to chloride deposition mapping

    OpenAIRE

    H. Guan; Love, A. J.; C. T. Simmons; Makhnin, O.; A. S. Kayaalp

    2010-01-01

    Chloride is commonly used as an environmental tracer for studying water flow and solute transport in the environment. It is especially useful for estimating groundwater recharge based on the commonly used chloride mass balance (CMB) method. Strong spatial variability in chloride deposition in coastal areas is one difficulty encountered in appropriately applying the method. A high-resolution bulk chloride deposition map in the coastal region is thus needed. The aim of this st...

  6. Chloride ingress in cement paste and mortar

    DEFF Research Database (Denmark)

    Jensen, Ole Mejlhede; Hansen, Per Freiesleben; Coats, Alison M.;

    1999-01-01

    modelled on Fick's law modified by a term for chloride binding. Inclusion of chloride binding significantly improves the profile shape of the modelled ingress profiles. The presence of fine aggregate and formation of interfacial transition zones at paste-aggregate boundaries does not significantly affect...

  7. Chloride ingress in cement paste and mortar

    DEFF Research Database (Denmark)

    Jensen, Ole Mejlhede; Hansen, Per Freiesleben; Coats, Alison M.;

    1999-01-01

    In this paper chloride ingress in cement paste and mortar is followed by electron probe microanalysis. The influence of several paste and exposure parameters on chloride ingress are examined (e.g., water-cement ratio, silica fume addition, exposure time, and temperature), The measurements...

  8. 75 FR 19657 - Barium Chloride From China

    Science.gov (United States)

    2010-04-15

    ... Commission found that the domestic interested party group response to its notice of institution (74 FR 31757... COMMISSION Barium Chloride From China AGENCY: United States International Trade Commission. ACTION: Notice of... chloride from China. SUMMARY: The Commission hereby gives notice that it will proceed with a full...

  9. Chloride binding site of neurotransmitter sodium symporters

    DEFF Research Database (Denmark)

    Kantcheva, Adriana Krassimirova; Quick, Matthias; Shi, Lei;

    2013-01-01

    Neurotransmitter:sodium symporters (NSSs) play a critical role in signaling by reuptake of neurotransmitters. Eukaryotic NSSs are chloride-dependent, whereas prokaryotic NSS homologs like LeuT are chloride-independent but contain an acidic residue (Glu290 in LeuT) at a site where eukaryotic NSSs...

  10. Chronopotentiometric chloride sensing using transition time measurement

    NARCIS (Netherlands)

    Abbas, Y.; Graaf, de D.B.; Olthuis, W.; Berg, van den A.

    2013-01-01

    Detection of chloride ions is crucial to accurately access the concrete structure durability[1]. The existing electrochemical method of chloride ions detection in concrete, potentiometry[1], is not suitable for in-situ measurement due to the long term stability issue of conventional reference electr

  11. Chemische contaminanten in diervoeder additief Choline Chloride

    NARCIS (Netherlands)

    Traag, W.A.; Hoogenboom, L.A.P.; Jong, de J.; Egmond, van H.J.; Dam, ten G.

    2010-01-01

    Dit briefrapport beschrijft de resultaten van een onderzoek naar chemische contaminanten in Choline Chloride. De doelstellingen waren: 1) Inzicht te verkrijgen in het voorkomen van (gebromeerde) vlamvertragers en broomdioxines in het diervoederadditief Choline Chloride en het, op basis van de result

  12. Diffusion behavior of chloride ions in concrete

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, T.; Gjoerv, O.E. [Norwegian Univ. of Science and Technology, Trondheim (Norway). Div. of Building Materials

    1996-06-01

    In the present paper, an analysis of the diffusion behavior of chloride ions in concrete is presented. In concentrated electrolytic aqueous solutions such as seawater or that typically used in laboratory experiments, the effect of ionic interaction may significantly reduce the chemical potential and thus the driving force of the diffusing species. Because of different drift velocities of the cations and chloride ions in the solution, the lagging motion of the cations will also retard the drift velocity of the chlorides. In addition, both the electrical double layer forming on the solid surface and the chemical binding may significantly interfere with the transport of the chloride ions. As a result, the diffusion behavior of the chloride ions in concrete is a more complex and complicated transport process than what can be described by Fick`s law of diffusion.

  13. Chloride Transport in Undersea Concrete Tunnel

    Directory of Open Access Journals (Sweden)

    Yuanzhu Zhang

    2016-01-01

    Full Text Available Based on water penetration in unsaturated concrete of underwater tunnel, a diffusion-advection theoretical model of chloride in undersea concrete tunnel was proposed. The basic parameters including porosity, saturated hydraulic conductivity, chloride diffusion coefficient, initial water saturation, and moisture retention function of concrete specimens with two water-binder ratios were determined through lab-scale experiments. The variation of chloride concentration with pressuring time, location, solution concentration, initial saturation, hydraulic pressure, and water-binder ratio was investigated through chloride transport tests under external water pressure. In addition, the change and distribution of chloride concentration of isothermal horizontal flow were numerically analyzed using TOUGH2 software. The results show that chloride transport in unsaturated concrete under external water pressure is a combined effect of diffusion and advection instead of diffusion. Chloride concentration increased with increasing solution concentration for diffusion and increased with an increase in water pressure and a decrease in initial saturation for advection. The dominant driving force converted with time and saturation. When predicting the service life of undersea concrete tunnel, it is suggested that advection is taken into consideration; otherwise the durability tends to be unsafe.

  14. Shelf life of unrefrigerated succinylcholine chloride injection.

    Science.gov (United States)

    Boehm, J J; Dutton, D M; Poust, R I

    1984-02-01

    The shelf life of succinylcholine chloride injection at several pH values when stored at room temperature was evaluated. Solutions containing 20 mg/ml of succinylcholine chloride were stored at 25 and 40 degrees C. The reaction was studied at pH values ranging from 3.0 to 4.5. At two-week intervals, the solutions were assayed by high-pressure liquid chromatography. The initial amount of succinylcholine chloride in all samples was 100.1 +/- 2.37% of label claim. Hydrolysis of succinylcholine chloride in unbuffered solutions followed apparent zero-order kinetics. The pH range of maximum stability was found to be from 3.75 to 4.50. Succinylcholine chloride decomposed at a considerably higher rate at 40 degrees C. Allowing for the effects of pH adjustment during manufacture and degradation during shipping, losses of 7.0% and 9.0% potency can be expected after storage at 25 degrees C for four and six weeks, respectively. Succinylcholine Chloride Injection, USP, should be stored in the refrigerator; if unbuffered succinylcholine chloride injection complying with USP pH limits must be stored at room temperature, it should not be kept for longer than four weeks. PMID:6702837

  15. Factors influencing chloride deposition in a coastal hilly area and application to chloride deposition mapping

    Directory of Open Access Journals (Sweden)

    H. Guan

    2010-05-01

    Full Text Available Chloride is commonly used as an environmental tracer for studying water flow and solute transport in the environment. It is especially useful for estimating groundwater recharge based on the commonly used chloride mass balance (CMB method. Strong spatial variability in chloride deposition in coastal areas is one difficulty encountered in appropriately applying the method. A high-resolution bulk chloride deposition map in the coastal region is thus needed. The aim of this study is to construct a chloride deposition map in the Mount Lofty Ranges (MLR, a coastal hilly area of approximately 9000 km2 spatial extent in South Australia. We examined geographic (related to coastal distance, orographic, and atmospheric factors that may influence chloride deposition, using partial correlation and regression analyses. The results indicate that coastal distance, elevation, as well as terrain aspect and slope, appear to be significant factors controlling chloride deposition in the study area. Coastal distance accounts for 70% of spatial variability in bulk chloride deposition, with elevation, terrain aspect and slope an additional 15%. The results are incorporated into a de-trended residual kriging model (ASOADeK to produce a 1 km×1 km resolution bulk chloride deposition and concentration maps. The average uncertainty of the deposition map is about 20–30% in the western MLR, and 40–50% in the eastern MLR. The maps will form a useful basis for examining catchment chloride balance for the CMB application in the study area.

  16. Reliability-Based Planning of Chloride Measurements

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Engelund, S.

    1996-01-01

    on measurements of the chloride content obtained from the given structure. In the present paper optimal planning of measurements of the chloride content in reinforced concrete structures is considered. It is shown how optimal experimental plans can be obtained using FORM-analysis. Bayesian statistics are used......In reinforced concrete structures corrosion is initiated when the chloride concentration around the reinforcement exceeds a threshold value. If corrosion starts then expensive repairs can be necessary. The estimation of the probability that corrosion has been initiated in a given structure is based...

  17. Binary Nucleation of Water and Sodium Chloride

    Energy Technology Data Exchange (ETDEWEB)

    Nemec, Thomas [Institute of Thermomechanics ASCR, Prague, Czech Republic; Marsik, Frantisek [Institute of Thermomechanics ASCR, Prague, Czech Republic; Palmer, Donald [ORNL

    2005-01-01

    Nucleation processes in the binary water-sodium chloride system are investigated in the sense of the classical nucleation theory (CNT). The CNT is modified to be able to handle the electrolytic nature of the system and is employed to investigate the acceleration of the nucleation process due to the presence of sodium chloride in the steam. This phenomenon, frequently observed in the Wilson zone of steam turbines, is called early condensation. Therefore, the nucleation rates of the water-sodium chloride mixture are of key importance in the power cycle industry.

  18. Surface adsorption in strontium chloride ammines

    DEFF Research Database (Denmark)

    Ammitzbøll, Andreas L.; Lysgaard, Steen; Klukowska, Agata;

    2013-01-01

    An adsorbed state and its implications on the ab- and desorption kinetics of ammonia in strontium chloride ammine is identified using a combination of ammonia absorption measurements, thermogravimetric analysis, and density functional theory calculations. During thermogravimetric analysis, ammoni...

  19. Catastrophic event modeling. [lithium thionyl chloride batteries

    Science.gov (United States)

    Frank, H. A.

    1981-01-01

    A mathematical model for the catastrophic failures (venting or explosion of the cell) in lithium thionyl chloride batteries is presented. The phenomenology of the various processes leading to cell failure is reviewed.

  20. Telomerization of Vinyl Chloride with Chloroform Initiated by Ferrous Chloride-Dimethylacetamide under Ultrasonic Conditions

    Directory of Open Access Journals (Sweden)

    Hua Qian

    2015-01-01

    Full Text Available Telomerization of vinyl chloride with chloroform was investigated using ferrous chloride-dimethylacetamide system, and 42.1% yield, more than four times the one reported before, was achieved. The addition of ultrasound further improved the reaction and yield was raised to 51.9% with trace byproducts at highly reduced reaction time and temperature. Ferrous chloride-dimethylacetamide under ultrasonic irradiation acts as a very efficient catalyst system for the 1 : 1 telomerization.

  1. Factors influencing chloride deposition in a coastal hilly area and application to chloride deposition mapping

    OpenAIRE

    H. Guan; Love, A. J.; C. T. Simmons; A. S. Kayaalp

    2009-01-01

    Chloride is commonly used as an environmental tracer for studying water flow and solute transport in the environment. It is especially useful for estimating groundwater recharge based on the commonly used chloride mass balance (CMB) method. Strong spatial variability in chloride deposition in coastal areas is one difficulty encountered in appropriately applying the CMB approach. Furthermore, intensive vegetation clearance for agriculture, for example during the European settlement in many...

  2. Estimating the chloride transport in cement paste

    OpenAIRE

    Princigallo, A.

    2012-01-01

    A method was developed to measure the diffusion coefficient of chloride ions in cement paste based on an analytical solution to Fick’s 2nd law in a cylindrical coordinate system. This natural method yielded diffusivity results within as little as a month. Testing time was reduced by exploiting the three-dimensional inward flux in the specimen. In an attempt to determine the saturation concentration, dense portland cement pastes were exposed to a concentrated chloride solution. The method prov...

  3. Influence of Chloride-Ion Adsorption Agent on Chloride Ions in Concrete and Mortar

    Directory of Open Access Journals (Sweden)

    Gai-Fei Peng

    2014-04-01

    Full Text Available The influence of a chloride-ion adsorption agent (Cl agent in short, composed of zeolite, calcium aluminate hydrate and calcium nitrite, on the ingress of chloride ions into concrete and mortar has been experimentally studied. The permeability of concrete was measured, and the chloride ion content in mortar was tested. The experimental results reveal that the Cl agent could adsorb chloride ions effectively, which had penetrated into concrete and mortar. When the Cl agent was used at a dosage of 6% by mass of cementitious materials in mortar, the resistance to the penetration of chloride ions could be improved greatly, which was more pronounced when a combination of the Cl agent and fly ash or slag was employed. Such an effect is not the result of the low permeability of the mortar, but might be a result of the interaction between the Cl agent and the chloride ions penetrated into the mortar. There are two possible mechanisms for the interaction between the Cl agent and chloride ion ingress. One is the reaction between calcium aluminate hydrate in the Cl agent and chloride ions to form Friedel’s salt, and the other one is that calcium aluminate hydrate reacts with calcium nitrite to form AFm during the early-age hydration of mortar and later the NO2− in AFm is replaced by chloride ions, which then penetrate into the mortar, also forming Friedel’s salt. More research is needed to confirm the mechanisms.

  4. Effect of Chloride Type on Penetration of Chloride Ions in Concrete

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The influence of chloride type on the diffusivity of chloride ions in concrete was studied by experiment. The result shows that the glectric resistance of concrete and the chloride diffusion coefficient are influenced by chloride type. For the same water/cement ratio (W/C), the diffusion coefficient D in KCl solution is larger than that in NaCl solution; however, the concrete resistance in KCl solution is smaller than that in NaCl solution. The experimental result is analyzed with theory of diffusion.

  5. 21 CFR 178.3290 - Chromic chloride complexes.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Chromic chloride complexes. 178.3290 Section 178... SANITIZERS Certain Adjuvants and Production Aids § 178.3290 Chromic chloride complexes. Myristo chromic chloride complex and stearato chromic chloride complex may be safely used as release agents in the...

  6. 49 CFR 179.102-17 - Hydrogen chloride, refrigerated liquid.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Hydrogen chloride, refrigerated liquid. 179.102-17...) § 179.102-17 Hydrogen chloride, refrigerated liquid. Each tank car used to transport hydrogen chloride... on or after March 16, 2009 used for the transportation of hydrogen chloride, refrigerated...

  7. Factors influencing chloride deposition in a coastal hilly area and application to chloride deposition mapping

    Directory of Open Access Journals (Sweden)

    H. Guan

    2009-09-01

    Full Text Available Chloride is commonly used as an environmental tracer for studying water flow and solute transport in the environment. It is especially useful for estimating groundwater recharge based on the commonly used chloride mass balance (CMB method. Strong spatial variability in chloride deposition in coastal areas is one difficulty encountered in appropriately applying the CMB approach. Furthermore, intensive vegetation clearance for agriculture, for example during the European settlement in many coastal areas of Australia, may have perturbed catchment chloride balance conditions for appropriate use in CMB applications. In order to deal with these issues, a high resolution chloride deposition map in the coastal region is needed. In this study, we examined geographic, orographic, and atmospheric factors influencing chloride deposition in the Mount Lofty Ranges (MLR, a coastal hilly area of approximately 9000 km2 spatial extent in South Australia, using partial correlation and regression analyses. The results indicate that coastal distance, and terrain aspect and slope are two most significant factors controlling chloride deposition. Coastal distance accounts for 65% spatial variability in chloride deposition, with terrain aspect and slope for 8%. The deposition gradient is about 0.08 gm-2 year-1 km-1 as one progresses inland. The results are incorporated into a published de-trended residual kriging approach (ASOADeK to produce a 1 km×1 km resolution annual chloride deposition map and a bulk precipitation chloride concentration map. The average uncertainty of the deposition map is about 30% in the western MLR, and over 50% in the eastern MLR. The maps will form a very useful basis for examining catchment chloride balances for use in the CMB application in the study area.

  8. Inhibition of nitrite-induced toxicity in channel catfish by calcium chloride and sodium chloride

    Science.gov (United States)

    Tommasso J.R., Wright; Simco, B.A.; Davis, K.B.

    1980-01-01

    Environmental chloride has been shown to inhibit methemoglobin formation in fish, thereby offering a protective effect against nitrite toxicity. Channel catfish (Ictalurus punctatus) were simultaneously exposed to various environmental nitrite and chloride levels (as either CaCl2 or NaCl) in dechlorinated tap water (40 mg/L total hardness, 47 mg/L alkalinity, 4 mg/L chloride, pH = 6.9-7.1, and temperature 21-24°C). Methemoglobin levels in fish simultaneously exposed to 2.5 mg/L nitrite and up to 30 mg/L chloride as either CaCl2 or NaCl were similar but significantly lower than in unprotected fish. Exposure to 10 mg/L nitrite and 60 mg/L chloride resulted in methemoglobin levels similar to those of the controls; most unprotected fish died. Fish exposed to 10 mg/L nitrite had significantly lower methemoglobin levels when protected with 15.0 mg/L chloride as CaCl2 than with NaCl. Fish exposed to nitrite in the presence of 60 mg/L chloride (as either CaCl2 or NaCl) had similar 24-h LC50 values that were significantly elevated above those obtained in the absence of chloride. Calcium had little effect on tolerance to nitrite toxicity in channel catfish in contrast to its large effect reported in steelhead trout (Salmo gairdneri).

  9. Congenital Chloride Diarrhea: Diagnosis by Easy-Accessible Chloride Measurement in Feces

    Directory of Open Access Journals (Sweden)

    C. Gils

    2016-01-01

    Full Text Available Background. Congenital chloride diarrhea (CCD is an autosomal recessive disorder caused by mutations in the genes encoding the intestinal Cl−/HCO3- exchanger and is clinically characterized by watery, profound diarrhea, electrolyte disturbances, and metabolic alkalosis. The CCD diagnosis is based on the clinical symptoms and measurement of high chloride concentration in feces (>90 mmol/L and is confirmed by DNA testing. Untreated CCD is lethal, while long-term clinical outcome improves when treated correctly. Case Presentation. A 27-year-old woman had an emergency caesarian due to pain and discomfort in gestational week 36 + 4. The newborn boy had abdominal distension and yellow fluid per rectum. Therapy with intravenous glucose and sodium chloride decreased his stool frequency and improved his clinical condition. A suspicion of congenital chloride diarrhea was strongly supported using blood gas analyzer to measure an increased chloride concentration in the feces; the diagnosis was confirmed by DNA testing. Discussion. Measurement of chloride in feces using an ordinary blood gas analyzer can serve as a preliminary analysis when congenital chloride diarrhea is suspected. This measurement can be easily performed with a watery feces composition. An easy-accessible chloride measurement available will facilitate the diagnostics and support the initial treatment if CCD is suspected.

  10. Amine and Titanium (IV Chloride, Boron (III Chloride or Zirconium (IV Chloride-Promoted Baylis-Hillman Reactions

    Directory of Open Access Journals (Sweden)

    Shi-Cong Cui

    2001-10-01

    Full Text Available The Baylis-Hillman reactions of various aryl aldehydes with methyl vinyl ketone at temperatures below -20oC using Lewis acids such as titanium (IV chloride, boron (III chloride or zirconium (IV chloride in the presence of a catalytic amount of selected amines used as a Lewis bases afford the chlorinated compounds 1 as the major product in very high yields. Acrylonitrile can also undergo the same reaction to give the corresponding chlorinated product in moderate yield. A plausible reaction mechanism is proposed. However, if the reaction was carried out at room temperature (ca. 20oC, then the Z-configuration of the elimination product 3, derived from 1, was formed as the major product.

  11. Chloride equilibrium potential in salamander cones

    Directory of Open Access Journals (Sweden)

    Bryson Eric J

    2004-12-01

    Full Text Available Abstract Background GABAergic inhibition and effects of intracellular chloride ions on calcium channel activity have been proposed to regulate neurotransmission from photoreceptors. To assess the impact of these and other chloride-dependent mechanisms on release from cones, the chloride equilibrium potential (ECl was determined in red-sensitive, large single cones from the tiger salamander retinal slice. Results Whole cell recordings were done using gramicidin perforated patch techniques to maintain endogenous Cl- levels. Membrane potentials were corrected for liquid junction potentials. Cone resting potentials were found to average -46 mV. To measure ECl, we applied long depolarizing steps to activate the calcium-activated chloride current (ICl(Ca and then determined the reversal potential for the current component that was inhibited by the Cl- channel blocker, niflumic acid. With this method, ECl was found to average -46 mV. In a complementary approach, we used a Cl-sensitive dye, MEQ, to measure the Cl- flux produced by depolarization with elevated concentrations of K+. The membrane potentials produced by the various high K+ solutions were measured in separate current clamp experiments. Consistent with electrophysiological experiments, MEQ fluorescence measurements indicated that ECl was below -36 mV. Conclusions The results of this study indicate that ECl is close to the dark resting potential. This will minimize the impact of chloride-dependent presynaptic mechanisms in cone terminals involving GABAa receptors, glutamate transporters and ICl(Ca.

  12. Dynamic Electrochemical Measurement of Chloride Ions.

    Science.gov (United States)

    Abbas, Yawar; de Graaf, Derk B; Olthuis, Wouter; van den Berg, Albert

    2016-02-05

    This protocol describes the dynamic measurement of chloride ions using the transition time of a silver silver chloride (Ag/AgCl) electrode. Silver silver chloride electrode is used extensively for potentiometric measurement of chloride ions concentration in electrolyte. In this measurement, long-term and continuous monitoring is limited due to the inherent drift and the requirement of a stable reference electrode. We utilized the chronopotentiometric approach to minimize drift and avoid the use of a conventional reference electrode. A galvanostatic pulse is applied to an Ag/AgCl electrode which initiates a faradic reaction depleting the Cl- ions near the electrode surface. The transition time, which is the time to completely deplete the ions near the electrode surface, is a function of the ion concentration, given by the Nernst equation. The square root of the transition time is in linear relation to the chloride ion concentration. Drift of the response over two weeks is negligible (59 µM/day) when measuring 1 mM [Cl-]using a current pulse of 10 Am(-2). This is a dynamic measurement where the moment of transition time determines the response and thus is independent of the absolute potential. Any metal wire can be used as a pseudo-reference electrode, making this approach feasible for long-term measurement inside concrete structures.

  13. Alkali metal and ammonium chlorides in water and heavy water (binary systems)

    CERN Document Server

    Cohen-Adad, R

    1991-01-01

    This volume surveys the data available in the literature for solid-fluid solubility equilibria plus selected solid-liquid-vapour equilibria, for binary systems containing alkali and ammonium chlorides in water or heavy water. Solubilities covered are lithium chloride, sodium chloride, potassium chloride, rubidium chloride, caesium chloride and ammonium chloride in water and heavy water.

  14. Method for preparation of melts of alkali metal chlorides with highly volatile polyvalent metal chlorides

    International Nuclear Information System (INIS)

    A method for production of alkali metal (Cs, Rb, K) chloride melts with highly volatile polyvalent metal chlorides is suggested. The method consists, in saturation of alkali metal chlorides, preheated to the melting point, by volatile component vapours (titanium tetrachloride, molybdenum or tantalum pentachloride) in proportion, corresponding to the composition reguired. The saturation is realized in an evacuated vessel with two heating areas for 1-1.5 h. After gradual levelling of temperature in both areas the product is rapidly cooled. 1 fig.; 1 tab

  15. Liquid crystalline critical dynamics in decylammonium chloride

    CERN Document Server

    Lee, K W; Lee, C E; Kang, K H; Rhee, C; Kang, J K

    1999-01-01

    Collective chain dynamics and phase transitions in a model biomembrane, decylammonium chloride (C sub 1 sub 0 H sub 2 sub 1 NH sub 3 Cl), were studied by means of proton nuclear magnetic resonance. Our measurements sensitively reflect the critical dynamics associated with the smectic C to smectic A transition of the lipid bilayer.

  16. 75 FR 20625 - Barium Chloride From China

    Science.gov (United States)

    2010-04-20

    ... established a schedule for the conduct of this review (74 FR 62587, November 30, 2010). Subsequently, counsel... From the Federal Register Online via the Government Publishing Office INTERNATIONAL TRADE COMMISSION Barium Chloride From China AGENCY: United States International Trade Commission. ACTION:...

  17. Chloride migration in concrete with superabsorbent polymers

    DEFF Research Database (Denmark)

    Hasholt, Marianne Tange; Jensen, Ole Mejlhede

    2015-01-01

    Superabsorbent polymers (SAP) can be used as a means for internal curing of concrete. In the present study, the development of transport properties of concrete with SAP is investigated. The chloride migration coefficient according to NT BUILD 492 is used as a measure of this. Twenty concrete...

  18. Determination of chloride in uranium solutions

    Energy Technology Data Exchange (ETDEWEB)

    Danse, A.; Stoch, H.; Steele, T.W.

    1967-05-15

    Thiocyanate is first removed by precipitation with a small excess of a copper solution, and the cations are removed by passing the filtrate through a cation-exchange resin. The chloride is determined in the eluate by a potentiometric titration in which silver nitrate solution is used.

  19. Amperometric Sensor for Detection of Chloride Ions

    Directory of Open Access Journals (Sweden)

    Rene Kizek

    2008-09-01

    Full Text Available Chloride ion sensing is important in many fields such as clinical diagnosis, environmental monitoring and industrial applications. We have measured chloride ions at a carbon paste electrode (CPE and at a CPE modified with solid AgNO3, a solution of AgNO3 and/or solid silver particles. Detection limits (3 S/N for chloride ions were 100 μM, 100 μM and 10 μM for solid AgNO3, solution of AgNO3 and/or solid silver particles, respectively. The CPE modified with silver particles is the most sensitive to the presence chloride ions. After that we approached to the miniaturization of the whole electrochemical instrument. Measurements were carried out on miniaturized instrument consisting of a potentiostat with dimensions 35 × 166 × 125 mm, screen printed electrodes, a peristaltic pump and a PC with control software. Under the most suitable experimental conditions (Britton-Robinson buffer, pH 1.8 and working electrode potential 550 mV we estimated the limit of detection (3 S/N as 500 nM.

  20. Gebromeerde vlamvertragers en broomdioxines in Choline Chloride

    NARCIS (Netherlands)

    Egmond, van H.J.; Traag, W.A.; Hoogenboom, L.A.P.

    2008-01-01

    Sinds begin 2008 worden in het Nationaal Plan Diervoeder Choline Chloride monsters (= diervoeder additief) gevonden waarbij de DR CALUX screenings-assay een sterk verdacht signaal geeft, maar bij de GC-HRMS geen dioxines en dl-PCB's worden gevonden. Dit rapport beschrijft de resultaten van nader ond

  1. Regulated trafficking of the CFTR chloride channel

    NARCIS (Netherlands)

    Braakman, L.J.; Kleizen, B.; Jonge, H.R. de

    2000-01-01

    The cystic fibrosis transmembrane conductance regulator (CFTR), the ABC transporter encoded by the cystic fibrosis gene, is localized in the apical membrane of epithelial cells where it functions as a cyclic AMP-regulated chloride channel and as a regulator of other ion channels and transporters. Wh

  2. 21 CFR 582.3845 - Stannous chloride.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Stannous chloride. 582.3845 Section 582.3845 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Chemical Preservatives §...

  3. Investigation of factors influencing chloride extraction efficiency during electrochemical chloride extraction from reinforcing concrete

    Science.gov (United States)

    Sharp, Stephen R.

    2005-11-01

    Electrochemical chloride extraction (ECE) is an accelerated bridge restoration method similar to cathodic protection, but operates at higher current densities and utilizes a temporary installation. Both techniques prolong the life of a bridge by reducing the corrosion rate of the reinforcing bar when properly applied. ECE achieves this by moving chlorides away from the reinforcement and out of the concrete while simultaneously increasing the alkalinity of the electrolyte near the reinforcing steel. Despite the proven success, significant use of ECE has not resulted in part due to an incomplete understanding in the following areas: (1) An estimation of the additional service life that can be expected following treatment when the treated member is again subjected to chlorides; (2) The cause of the decrease in current flow and, therefore, chloride removal rate during treatment; (3) Influence of water-to-cement (w/c) ratio and cover depth on the time required for treatment. This dissertation covers the research that is connected to the last two areas listed above. To begin examining these issues, plain carbon steel reinforcing bars (rebar) were embedded in portland cement concrete slabs of varying water-to-cement (w/c) ratios and cover depths, and then exposed to chlorides. A fraction of these slabs had sodium chloride added as an admixture, with all of the slabs subjected to cyclical ponding with a saturated solution of sodium chloride. ECE was then used to remove the chlorides from these slabs while making electrical measurements in the different layers between the rebar (cathode) and the titanium mat (anode) to follow the progress of the ECE process. During this study, it was revealed that the resistance of the outer concrete surface layer increases during ECE, inevitably restricting current flow, while the resistance of the underlying concrete decreases or remains constant. During ECE treatment, a white residue formed on the surface of the concrete. Analyses of the

  4. Viscosity and density tables of sodium chloride solutions

    Energy Technology Data Exchange (ETDEWEB)

    Fair, J.A.; Ozbek, H. (comps.)

    1977-04-01

    A file is presented containing tabulated data extracted from the scientific literature on the density and viscosity of aqueous sodium chloride solutions. Also included is a bibliography of the properties of aqueous sodium chloride solutions. (MHR)

  5. Kinetics of Vinyl Chloride Polymerization with Mixture of Initiators

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Kinetic models for the rate constants of vinyl chloride polymerization in the presence of initiator mixtures were proposed. They may be used to design the initiator recipes for the vinyl chloride polymerization with uniform rate at different temperatures at which various grades of poly(vinyl chloride) will be prepared.

  6. Removal of iron contaminant from zirconium chloride solution

    International Nuclear Information System (INIS)

    This patent describes a process for eliminating iron contaminant from an aqueous zirconium chloride solution that has been contaminated with FeCl3 in a plant in which zirconium and hafnium chloride solutions are separated by a main MINK solvent extraction system and the FeCl3 is normally removed from the zirconium chloride solution by a secondary MINK solvent extraction system

  7. Revised Model of Chloride Diffusion in Concrete Bridge by Considering Complex Action of Load and Chloride Binding Capacity

    OpenAIRE

    Xiang, Yiqiang; Guo, DongMei

    2014-01-01

    Coastal concrete bridges will suffer from deterioration of RC structural performance and resistance attenuation because of the chloride penetration and other environment factors. This article discusses current different chloride diffusion models and puts forward the revised model of chloride diffusion in concrete bridge by considering the complex action of load influence and chloride-binding capacity. Comparison of numerical predicted values and relative experimental tests show the presented ...

  8. BARRIER PROPERTIES OF VINYLIDENE CHLORIDE COPOLYMERS

    Institute of Scientific and Technical Information of China (English)

    LI Yuesheng; WENG Zhixue; HUANG Zhiming; PAN Zuren

    1996-01-01

    The permeability coefficients of a series of copolymers of vinylidene chloride (VDC)with methyl acrylate (MA), butyl acrylate (BA) or vinyl chloride (VC) (as comonomer)to oxygen and carbon dioxide have been measured at 1.0 MPa and 30℃, while those to water vapor have been measured at 30℃ and 100% relative humidity. All the copolymers are semicrystalline. VDC/MA copolymers have lower melting temperature compared with VDC/BA copolymers, while that melting temperature of VDC/VC copolymer is higher than that of VDC/acrylate copolymers with the same VDC content. The barrier property of the copolymers is predominantly controlled by crystallite, free volume fraction, and cohesive energy. The permeability coefficients of VDC/MA copolymers to oxygen, carbon dioxide, and water vapor were successfully correlated with the ratio of free volume to cohesive energy.

  9. STABILISATION OF SILTY CLAY SOIL USING CHLORIDE

    Directory of Open Access Journals (Sweden)

    TAMADHER T. ABOOD

    2007-04-01

    Full Text Available The object of this paper is to investigate the effect of adding different chloride compounds including (NaCl, MgCl2, CaCl2 on the engineering properties of silty clay soil. Various amounts of salts (2%, 4%, and 8% were added to the soil to study the effect of salts on the compaction characteristics, consistency limits and compressive strength. The main findings of this study were that the increase in the percentage of each of the chloride compounds increased the maximum dry density and decrease the optimum moisture content. The liquid limit, plastic limit and plasticity index decreased with the increase in salt content. The unconfinedcompressive strength increased as the salt content increased.

  10. Chloride migration in concrete with superabsorbent polymers

    OpenAIRE

    Hasholt, Marianne Tange; Jensen, Ole Mejlhede

    2015-01-01

    Superabsorbent polymers (SAP) can be used as a means for internal curing of concrete. In the present study, the development of transport properties of concrete with SAP is investigated. The chloride migration coefficient according to NT BUILD 492 is used as a measure of this. Twenty concrete mixtures aretested 7, 14, and 28 days after casting. The development of degree of hydration is followed for 20 corresponding paste mixtures.Both when SAP is added with extra water to compensate the SAP wa...

  11. A Duplex Stainless Steel for Chloride Environments

    Science.gov (United States)

    Sridhar, N.; Kolts, J.; Flasche, L. H.

    1985-03-01

    This paper examines the effects of microstructural changes on the corrosion, stress corrosion cracking and corrosion fatigue resistance of a duplex stainless steel to chloride environments. The microstructural changes can be precipitation of phases such as sigma and carbides, or changes in the distribution of austenite and ferrite. The former can be important in hot forming operations while the latter is important in welding. The methods of minimizing these deleterious effects can sometimes be different from those used for austenitic stainless steel.

  12. Electrodeposition of Zinc from Chloride Solution

    OpenAIRE

    NAIK, Yanjerappa Arthoba; VENKATESHA, Thimmappa Venkatarangaiah

    2002-01-01

    The electroplating of zinc is carried out in the presence of 3,4,5-Trimethoxy benzaldehyde from a chloride bath. The bath constituents are optimized through Hull cell experiments. Operating parameters such as pH, temperature, and current density are also optimized. The current efficiency and throwing power are measured at different current densities. Polarization study is carried out under galvanostatic conditions. Corrosion resistance test indicated good protection of steel by the ...

  13. (tert-Butyl(2-hydroxyethylammonium chloride

    Directory of Open Access Journals (Sweden)

    Cintya Valerio-Cárdenas

    2014-07-01

    Full Text Available In the cation of the title molecular salt, C6H16NO+·Cl−, the N—C—C—O torsion angle is 176.5 (2°. In the crystal, the cations and chloride ions are linked by N—H...O and O—H...O hydrogen bonds, generating a two-dimensional network parallel to (100.

  14. Influence of chloride admixtures on cement matrix durability

    International Nuclear Information System (INIS)

    The influence of various inorganic salts, as chloride admixtures to Portland cement, on the mechanical properties and the durability of the matrix has been studied. The salts used in this study are chromium, nickel and cadmium chlorides. Improved compressive strength values are obtained which have been correlated to the stable metal hydroxide formation in high pH environment. Under static water conditions at 500C, hydrolyzed chloride ions exhibit adverse effects on the matrix durability through rapid release of calcium as calcium chloride in the initial period of leaching. On the contrary, enhanced matrix durability is obtained on long term leaching in the case of cement containing chromium chloride

  15. Boldine action against the stannous chloride effect.

    Science.gov (United States)

    Reiniger, I W; Ribeiro da Silva, C; Felzenszwalb, I; de Mattos, J C; de Oliveira, J F; da Silva Dantas, F J; Bezerra, R J; Caldeira-de-Araújo, A; Bernardo-Filho, M

    1999-12-15

    Peumus boldus extract has been used in popular medicine in the treatment of biliar litiase, hepatic insufficiency and liver congestion. Its effects are associated to the substance boldine that is present in its extract. In the present work, we evaluated the influence of boldine both in: (i) the structural conformation of a plasmid pUC 9.1 through gel electrophoresis analysis; and in (ii) the survival of the strain of Escherichia coli AB1157 submitted to reactive oxygen species (ROS), generated by a Fenton like reaction, induced by stannous chloride. Our results show a reduction of the lethal effect induced by stannous chloride on the survival of the E. coli culture in the presence of boldine. The supercoiled form of the plasmid is not modified by stannous chloride in the presence of boldine. We suggest that the protection induced by boldine could be explained by its anti-oxidant mechanism. In this way, the boldine could be reacting with stannous ions, protecting them against the oxidation and, consequently, avoiding the generation of ROS. PMID:10624900

  16. Potassium chloride production by microcline chlorination

    Energy Technology Data Exchange (ETDEWEB)

    Orosco, Pablo, E-mail: porosco@unsl.edu.ar [Instituto de Investigaciones en Tecnología Química (INTEQUI), Chacabuco y Pedernera, San Luis (Argentina); Facultad de Química, Bioquímica y Farmacia, Universidad Nacional de San Luis, Chacabuco y Pedernera, San Luis (Argentina); Ruiz, María del Carmen [Instituto de Investigaciones en Tecnología Química (INTEQUI), Chacabuco y Pedernera, San Luis (Argentina)

    2015-08-10

    Highlights: • Use of chlorination for the KCl production. • The reagents used were microcline, hydromagnesite and chlorine. • Isothermal and non-isothermal assays were performed in Cl{sub 2}–N{sub 2} mixture. • The chlorination generated KCl at 700 °C. • The chlorination products promote KCl formation. - Abstract: The potassium chloride is one of the most important fertilizers used in agriculture. The current demand of this salt makes interesting the study of potassium chloride production from unconventional potassium resources. In this work the potassium chloride production by chlorination of microcline was investigated. The starting reagents were microcline, hydromagnesite and chlorine. Non-isothermal and isothermal chlorination assays were carried out in a thermogravimetric device adapted to work in corrosive atmospheres. The temperature effect on potassium extraction and the phase transformations produced during chlorination of microcline were studied. The reagents and reaction products were analyzed by X-ray fluorescence (XRF) and X-ray diffraction (XRD). The experimental results indicated that by chlorination of microcline an important extraction of potassium in the temperature range from 800 to 900 °C was produced. Moreover, at 800 °C the forsterite, enstatite and magnesium aluminate spinel phases were generated.

  17. Understanding microwave vessel contamination by chloride species.

    Science.gov (United States)

    Recchia, Sandro; Spanu, Davide; Bianchi, Davide; Dossi, Carlo; Pozzi, Andrea; Monticelli, Damiano

    2016-10-01

    Microwaves are widely used to assist digestion, general sample treatment and synthesis. The use of aqua regia is extensively adopted for the closed vessel mineralization of samples prior to trace element detection, leading to the contamination of microwave vessels by chlorine containing species. The latter are entrapped in the polymeric matrix of the vessels, leading to memory effects that are difficult to remove, among which the risk of silver incomplete recoveries by removal of the sparingly soluble chloride is the predominant one. In the present paper, we determined by mass spectrometry that hydrogen chloride is the species entrapped in the polymeric matrix and responsible for vessel contamination. Moreover, several decontamination treatments were considered to assess their efficiency, demonstrating that several cleaning cycles with water, nitric acid or silver nitrate in nitric acid were inefficient in removing chloride contamination (contamination reduction around 90%). Better results (≈95% decrease) were achieved by a single decontamination step in alkaline environment (sodium hydroxide or ammonia). Finally, a thermal treatment in a common laboratory oven (i.e. without vacuum and ventilation) was tested: a one hour heating at 150°C leads to a 98.5% decontamination, a figure higher than the ones obtained by wet treatments which requires comparable time. The latter treatment is a major advancement with respect to existing treatments as it avoids the need of a vacuum oven for at least 17h as presently proposed in the literature.

  18. An autopsy case of zinc chloride poisoning.

    Science.gov (United States)

    Kondo, Takeshi; Takahashi, Motonori; Watanabe, Seiya; Ebina, Masatomo; Mizu, Daisuke; Ariyoshi, Koichi; Asano, Migiwa; Nagasaki, Yasushi; Ueno, Yasuhiro

    2016-07-01

    Ingestion of large amounts of zinc chloride causes corrosive gastroenteritis with vomiting, abdominal pain, and diarrhea. Some individuals experience shock after ingesting large amounts of zinc chloride, resulting in fatality. Here, we present the results of an administrative autopsy performed on a 70-year-old man who ingested zinc chloride solution and died. After drinking the solution, he developed vomiting, abdominal pain, and diarrhea, and called for an ambulance. Except for tachycardia, his vital signs were stable at presentation. However, he developed hypotension and severe metabolic acidosis and died. The patient's blood zinc concentration on arrival was high at 3030μg/dL. Liver cirrhosis with cloudy yellow ascites was observed, however, there were no clear findings of gastrointestinal perforation. The gastric mucosa was gray-brown, with sclerosis present in all gastric wall layers. Zinc staining was strongly positive in all layers. There was almost no postmortem degeneration of the gastric mucosal epithelium, and hypercontracture of the smooth muscle layer was observed. Measurement of the zinc concentration in the organs revealed the highest concentration in the gastric mucosa, followed by the pancreas and spleen. Clinically, corrosive gastroenteritis was the cause of death. However, although autopsy revealed solidification in the esophagus and gastric mucosa, there were no findings in the small or large intestine. Therefore, metabolic acidosis resulting from organ damage was the direct cause of death. PMID:27497327

  19. The Accelerated Test of Chloride Permeability of Concrete

    Institute of Scientific and Technical Information of China (English)

    TAN Ke-feng; ODD E Gjφrv

    2003-01-01

    The availability of accelerated chloride permeability test and the effect of w/c ratio, incorporation of silica fume, maximum aggregate size and aggregate type on the chloride permeability were studied. The mathematic analysis certifies that there is a linear relationship between accelerated test and natural diffusion. Test results show that the chloride permeability of concrete increases as w/c ratio increases whilst a limited amount of replacement of cement with silica fume, the chloride permeability decreases dramatically. The maximum aggregate size in the range of 8 to 25 mm seems also affect chloride permeability but with a much less significant level. The chloride permeability of silica fume lightweight aggregate concrete is very low, especially the concrete made with dry lightweight concrete. The chloride permeability can be evaluated by this accelerated test method.

  20. Chloride regulates afferent arteriolar contraction in response to depolarization

    DEFF Research Database (Denmark)

    Hansen, P B; Jensen, B L; Skott, O

    1998-01-01

    -Renal vascular reactivity is influenced by the level of dietary salt intake. Recent in vitro data suggest that afferent arteriolar contractility is modulated by extracellular chloride. In the present study, we assessed the influence of chloride on K+-induced contraction in isolated perfused rabbit...... afferent arterioles. In 70% of vessels examined, K+-induced contraction was abolished by acute substitution of bath chloride. Consecutive addition of Cl- (30, 60, 80, 100, 110, and 117 mmol/L) restored the sensitivity to K+, and half-maximal response was observed at 82 mmol/L chloride. The calcium channel...... antagonist diltiazem (10(-6) mol/L) abolished K+-induced contractions. Bicarbonate did not modify the sensitivity to chloride. Norepinephrine (10(-6) mol/L) induced full contraction in depolarized vessels even in the absence of chloride. Iodide and nitrate were substituted for chloride with no inhibitory...

  1. 40 CFR 61.64 - Emission standard for polyvinyl chloride plants.

    Science.gov (United States)

    2010-07-01

    ... Standard for Vinyl Chloride § 61.64 Emission standard for polyvinyl chloride plants. An owner or operator of a polyvinyl chloride plant shall comply with the requirements of this section and § 61.65. (a... is not to exceed 0.02 g vinyl chloride/kg (0.04 lb vinyl chloride/ton) of polyvinyl chloride...

  2. Relation between chloride exchange diffusion and a conductive chloride pathway across the isolated skin of the toad (Bufo bufo)

    DEFF Research Database (Denmark)

    Kristensen, P; Larsen, Erik Hviid

    1978-01-01

    Substitution of chloride in the outside bathing medium of the toad skin with bromide, iodide, nitrate and sulphate leads to a reduction in the apparent exchange diffusion of chloride across this tissue, and also to a reduction of the chloride current recorded during hyperpolarization. A series...... of inhibitors (thiocyanate, furosemide, phloretin, and acetazolamide) also affects chloride exchange diffusion, hyperpolarization current as well as chloride influx during hyperpolarization. Although in some cases, effects on the short circuit current were also observed none of the effects on chloride transport....... On the basis of these findings, and the results reported in the previous paper (Hviid Larsen and Kristensen 1977) it is considered probable that the membrane molecules responsible to chloride exchange diffusion under short circuit conditions, are rearranged under the influence of a hyperpolarizing clamping...

  3. Anti-chloride permeability and anti-chloride corrodibility of a green high performance concrete admixture in concrete

    Institute of Scientific and Technical Information of China (English)

    ZHENG Yongbao; LIU Xinrong; LIU Dongyan; CHEN Jiangong; HUANG Xiongjun

    2003-01-01

    The effects of green high performance concrete (GHPC) admixture on the anti-chloride permeability and anti- chloride corrodibility of concrete are studied by a series of experiments designed on the basis of the diffusion principle and electrochemical principle. The GHPC admixture consists of fly ash, gangue, slag, red mud, etc., of which the mass fraction of industrial residues is over 96 %. The anti-permeabilities and anti-corrodibilities of the tested GHPC and normal concrete (NC) are evaluated by the Diffusion Coefficients of chloride which was obtained by measuring the concentration of chloride in the tested systems by the voltage difference method. It is found that the adoption of GHPC admixture greatly improves the anti-chloride permeability and anti-chloride corrodibility by modifying the inner structure and contracting the porosity of concrete to the reduce considerably the diffusion rate of chloride. The admixture is desirable regarding its engineering performances as well as economical and environmental interests.

  4. Chloride diffusion in partially saturated cementitious material

    DEFF Research Database (Denmark)

    Nielsen, Erik Pram; Geiker, Mette Rica

    2003-01-01

    The paper proposes a combined application of composite theory and Powers' model for microstructural development for the estimation of the diffusion coefficient as a function of the moisture content of a defect-free cementitious material. Measurements of chloride diffusion in mortar samples (440 kg....../m(3) rapid-hardening Portland cement, w/c = 0.5, maturity minimum 6 months) stored at 65% and 85% RH, as well as in vacuum-saturated mortar samples, illustrate the applicability of the method. (C) 2003 Elsevier Science Ltd. All rights reserved....

  5. Oral cadmium chloride intoxication in mice

    DEFF Research Database (Denmark)

    Andersen, O; Nielsen, J B; Svendsen, P

    1988-01-01

    Diethyldithiocarbamate (DDC) is known to alleviate acute toxicity due to injection of cadmium salts. However, when cadmium chloride was administered by the oral route, DDC enhanced rather than alleviated the acute toxicity; both oral and intraperitoneal (i.p.) administration of DDC had this effect....... Thus, orally administered DDC enhanced cadmium-induced duodenal and ileal tissue damage and inhibition of peristalsis, as indicated by an increased intestinal transit time. At low cadmium doses, the whole-body retention of cadmium was increased by oral DDC administration. Intraperitoneally administered...

  6. N-(2-Benzoylethylpropan-2-aminium chloride

    Directory of Open Access Journals (Sweden)

    Abdullah Aydın

    2012-09-01

    Full Text Available In the title salt, C12H18NO+·Cl−, N—H...Cl interactions between the free chloride anions and the organic cations connect the molecules into hydrogen-bond dimers, forming a R22(8 motif. The dimers are linked by C—H...O hydrogen bonds into chains extending along [301]. The carbonyl group is co-planar with the phenyl ring [C—C—C=O torsion angle = −3.3 (7°]. The side chain has an E conformation.

  7. Interactions between chloride ingress and carbonation in cementitious materials

    OpenAIRE

    SAILLIO, Mickael; BARBERON, Fabien; BAROGHEL BOUNY, Véronique; GEGOUT, Philippe; PLATRET, Gérard; D'ESPINOSE DE LA CAILLERIE, JB

    2011-01-01

    Carbonation and chloride attacks are the major causes of reinforced concrete (RC) structure deterioration by initiation of steel rebar corrosion. These attacks are usually studied separately in the literature. Chloride-induced corrosion takes place mainly in marine environment or in the case of contact with deicing salts, while carbonation is systematically present in all RC structures at a variable degree. Since carbonation leads to significant microstructure changes, the effect of chloride ...

  8. Surface Chloride Concentration of Concrete under Shallow Immersion Conditions

    OpenAIRE

    Jun Liu; Kaifeng Tang; Dong Pan; Zongru Lei; Weilun Wang; Feng Xing

    2014-01-01

    Deposition of chloride ions in the surface layer of concrete is investigated in this study. In real concrete structure, chloride ions from the service environment can penetrate into concrete and deposit in the surface layer, to form the boundary condition for further diffusion towards the interior. The deposit amount of chloride ions in the surface layer is normally a function of time, rather than a constant. In the experimental investigation, concrete specimens with different mix proportions...

  9. N,N-Dimethyldehydroabietylammonium chloride ethanol monosolvate

    Directory of Open Access Journals (Sweden)

    Xiu-Zhi Huang

    2013-06-01

    Full Text Available The title compound {systematic name: 1-[(1R,4aS,10aR-7-isopropyl-1,4a-dimethyl-1,2,3,4,4a,9,10,10a-octahydrophenanthren-1-yl]-N,N-dimethylmethanaminium chloride ethanol monosolvate}, C22H36N+·Cl−·C2H6O, was synthesized from dehydroabietylamine by N-methylation with formaldehyde/formic acid and transformation into the hydrochloride. The dehydroabietyl moiety exhibits the usual conformation with the two cyclohexane rings in chair and half-chair conformations and a trans-ring junction. The crystal structure is built up from columns of the dehydroabietyl moieties stacked along the a axis. These columns are held together by the chloride ions via N—H...Cl and C—H...Cl interactions, which establish a two-dimensional network parallel to (010. The ethanol solvent molecules are located between the columns and anchored via O—H...Cl hydrogen bonds.

  10. Open cycle lithium chloride cooling system

    Science.gov (United States)

    Lenz, T. G.; Loef, G. O. G.; Iyer, R.; Wenger, J.

    1983-05-01

    A lithium chloride open cycle absorption chiller has been designed, built and tested. Solution reconcentration takes place in a small counter current packed column supplied with solar heated air. Removal of noncondensable gases that enter the chiller dissolved in the strong solution and the make-up refrigerant streams is accomplished by a liquid-jet ejector and a small vacuum pump. Cooling capacities approaching 1.4 tons and COP levels of 0.58 have been achieved at non-optimum operating conditions. Test results from preliminary system operation suggest that mass transfer processes in both the packed column reconcentrator and the absorber are controlled by concentration gradients in the lithium chloride solution. Liquid phase controlled mass transfer dictates an operating strategy different from the previously assumed gas phase controlled process to obtain maximum rates of evaporation in the packed column. Determination of optimal operating conditions leading to decreased electrical power consumption and improved cooling capacity and coefficient of performance will require further analysis and testing.

  11. Synthesis and structure characterization of diethyldiallylammonium chloride

    Institute of Scientific and Technical Information of China (English)

    刘立华; 龚竹青; 郑雅杰

    2003-01-01

    The unsaturated quaternary ammonium salt diethyldiallylammonium chloride(DEDAAC) was synthesized in a two-step synthetic method. The influences of the adding method of raw materials and temperature on the yields of diethylallylamine (DEAA), and drying and temperature on the synthesis of DEDAAC were investigated. The content of in-process product DEAA was determined by non-aqueous titration. The structure of product DEDAAC was identified with IR, 1 H NMR and elemental analysis. The results show that adding allyl chloride and sodium hydroxide alternately can increase the yield of DEAA and decrease by-products. In further synthesizing of DEDAAC from DEAA, the step of drying DEAA is very necessary. When DEAA is dried by solid sodium hydroxide, good columnar crystals with a high purity(mp 199.5-201.0 ℃) are obtained; when DEAA is undried or the content of water in DEAA is above 20%, only platelets with bad quality are obtained even without crystals. The suitable synthesis conditions for DEAA and DEDAAC are 35 ℃, 6 h and 40 ℃, 36 h, respectively, and their yields are 69.7% and 67.3%, respectively.

  12. Fault locator of an allyl chloride plant

    Directory of Open Access Journals (Sweden)

    Savković-Stevanović Jelenka B.

    2004-01-01

    Full Text Available Process safety analysis, which includes qualitative fault event identification, the relative frequency and event probability functions, as well as consequence analysis, was performed on an allye chloride plant. An event tree for fault diagnosis and cognitive reliability analysis, as well as a troubleshooting system, were developed. Fuzzy inductive reasoning illustrated the advantages compared to crisp inductive reasoning. A qualitative model forecast the future behavior of the system in the case of accident detection and then compared it with the actual measured data. A cognitive model including qualitative and quantitative information by fuzzy logic of the incident scenario was derived as a fault locator for an ally! chloride plant. The obtained results showed the successful application of cognitive dispersion modeling to process safety analysis. A fuzzy inductive reasoner illustrated good performance to discriminate between different types of malfunctions. This fault locator allowed risk analysis and the construction of a fault tolerant system. This study is the first report in the literature showing the cognitive reliability analysis method.

  13. Interpretation of postmortem vitreous concentrations of sodium and chloride.

    Science.gov (United States)

    Zilg, B; Alkass, K; Berg, S; Druid, H

    2016-06-01

    Vitreous fluid can be used to analyze sodium and chloride levels in deceased persons, but it remains unclear to what extent such results can be used to diagnose antemortem sodium or chloride imbalances. In this study we present vitreous sodium and chloride levels from more than 3000 cases. We show that vitreous sodium and chloride levels both decrease with approximately 2.2mmol/L per day after death. Since potassium is a well-established marker for postmortem interval (PMI) and easily can be analyzed along with sodium and chloride, we have correlated sodium and chloride levels with the potassium levels and present postmortem reference ranges relative the potassium levels. We found that virtually all cases outside the reference range show signs of antemortem hypo- or hypernatremia. Vitreous sodium or chloride levels can be the only means to diagnose cases of water or salt intoxication, beer potomania or dehydration. We further show that postmortem vitreous sodium and chloride strongly correlate and in practice can be used interchangeably if analysis of one of the ions fails. It has been suggested that vitreous sodium and chloride levels can be used to diagnose drowning or to distinguish saltwater from freshwater drowning. Our results show that in cases of freshwater drowning, vitreous sodium levels are decreased, but that this mainly is an effect of postmortem diffusion between the eye and surrounding water rather than due to the drowning process, since the decrease in sodium levels correlates with immersion time. PMID:27105154

  14. On Barium Oxide Solubility in Barium-Containing Chloride Melts

    Science.gov (United States)

    Nikolaeva, Elena V.; Zakiryanova, Irina D.; Bovet, Andrey L.; Korzun, Iraida V.

    2016-08-01

    Oxide solubility in chloride melts depends on temperature and composition of molten solvent. The solubility of barium oxide in the solvents with barium chloride content is essentially higher than that in molten alkali chlorides. Spectral data demonstrate the existence of oxychloride ionic groupings in such melts. This work presents the results of the BaO solubility in two molten BaCl2-NaCl systems with different barium chloride content. The received data together with earlier published results revealed the main regularities of BaO solubility in molten BaO-BaCl2-MCl systems.

  15. Catalytic Conversion of Cellulose to Levulinic Acid by Metal Chlorides

    Directory of Open Access Journals (Sweden)

    Beixiao Zhang

    2010-08-01

    Full Text Available The catalytic performance of various metal chlorides in the conversion of cellulose to levulinic acid in liquid water at high temperatures was investigated. The effects of reaction parameters on the yield of levulinic acid were also explored. The results showed that alkali and alkaline earth metal chlorides were not effective in conversion of cellulose, while transition metal chlorides, especially CrCl3, FeCl3 and CuCl2 and a group IIIA metal chloride (AlCl3, exhibited high catalytic activity. The catalytic performance was correlated with the acidity of the reaction system due to the addition of the metal chlorides, but more dependent on the type of metal chloride. Among those metal chlorides, chromium chloride was found to be exceptionally effective for the conversion of cellulose to levulinic acid, affording an optimum yield of 67 mol % after a reaction time of 180 min, at 200 °C, with a catalyst dosage of 0.02 M and substrate concentration of 50 wt %. Chromium metal, most of which was present in its oxide form in the solid sample and only a small part in solution as Cr3+ ion, can be easily separated from the resulting product mixture and recycled. Finally, a plausible reaction scheme for the chromium chloride catalyzed conversion of cellulose in water was proposed.

  16. Durability of cracked fibre reinforced concrete structures exposed to chlorides

    DEFF Research Database (Denmark)

    Hansen, Ernst Jan De Place; Ekman, Tom; Hansen, Kurt Kielsgaard

    1999-01-01

    is used as environmental load. The chloride penetration is characterized both qualitatively (UV-test) and quantitatively (chloride profile) and by microscopy. The test programme involves three different concrete qualities. Both steel fibres and polypropylene fibres are used in the concrete beams as well......Durability studies are carried out by subjecting FRC-beams to combined mechanical and environmental load. Mechanical load is obtained by exposing beams to 4-point bending until a predefined crack width is reached, using a newly developed test setup. Exposure to a concentrated chloride solution...... as main reinforcement. The effect of the cracks, the fibres and the concrete quality on the chloride penetration is studied....

  17. THE COMPATIBILITY OF BLENDS OF POLY(VINYL CHLORIDE) OR CHLORINATED POLY(VINYL CHLORIDE) WITH POLY(METHYL METHACRYLATE)

    Institute of Scientific and Technical Information of China (English)

    WANG Qingguo; CHENG Rongshi

    1988-01-01

    IR spectral shifts of carbonyl vibrational absorption for ethyl acetate, which acts analogically as the structural unit of poly(methyl methacrylate), in cyclohexane, chloroform, chlorinated paraffins, poly(vinyl chloride) and chlorinated poly(vinyl chloride) were measured. The results suggest that there are specific interactions between the carbonyl groups and the chlorinated hydrocarbons which could be responsible for the apparent compatibility of poly(vinyl chloride) -poly(methyl methacrylate) and chlorinated poly(vinyl chloride) -poly(methyl methacrylate) blends. Additionally, the effects of the preparation mode of blend films on phase separation and observed compatibility are discussed.

  18. [Survey of plasticizers in polyvinyl chloride toys].

    Science.gov (United States)

    Abe, Yutaka; Yamaguchi, Miku; Mutsuga, Motoh; Hirahara, Yoshichika; Kawamura, Yoko

    2012-01-01

    Plasticizers in 101 samples of polyvinyl chloride (PVC) toys on the Japanese market were surveyed. No phthalates were detected in designated toys, though bis(2-ethylhexyl)phthalate, diisononyl phthalate, diisobutyl phthalate, dibutyl phthalate, diisodecyl phthalate and benzyl butyl phthalate were detected in more than half of other toys. 2,2,4-Tributyl-1,3-pentanediol diisobutylate, o-acetyl tributyl citrate, adipates and diacetyl lauroyl glycerol, which are alternative plasticizers to phthalates, were detected. The results of structural analysis confirmed the presence of di(2-ethylhexyl)terephthalate, tributyl citrate, diisononyl 1,2-cyclohexanedicarboxylate and neopentyl glycol esters; these have not previonsly been reported in Japan. There appears to be a shift in plasticizers used for designated toys from phthalates to new plasticizers, and the number of different plasticizers is increasing.

  19. Estimating the chloride transport in cement paste

    Directory of Open Access Journals (Sweden)

    Princigallo, A.

    2012-06-01

    Full Text Available A method was developed to measure the diffusion coefficient of chloride ions in cement paste based on an analytical solution to Fick’s 2nd law in a cylindrical coordinate system. This natural method yielded diffusivity results within as little as a month. Testing time was reduced by exploiting the three-dimensional inward flux in the specimen. In an attempt to determine the saturation concentration, dense portland cement pastes were exposed to a concentrated chloride solution. The method proved to be useful for exploring cement hydration-induced changes in the diffusion coefficient of cement paste.

    Se ha desarrollado un método para medir el coeficiente de difusión de los iones cloruro en la pasta de cemento, partiendo de una aplicación analítica de la segunda ley de Fick en un sistema de coordinadas cilíndrico. Este método, que es natural, demostró ser capaz de producir resultados de difusividad en tan solo un mes. Se consiguió reducir el tiempo de ensayo mediante el aprovechamiento de la tridimensionalidad del flujo desde el exterior al interior de la probeta. A fin de determinar la concentración de saturación, se sometieron las pastas de cemento Portland a una disolución de cloruros concentrada. Este método resultó ser útil en el estudio de los cambios del coeficiente de difusión de la pasta de cemento provocados por las reacciones de hidratación que tienen lugar en esta.

  20. Experimental and numerical investigation of chloride ingress in cracked concrete

    NARCIS (Netherlands)

    Šavija, B.

    2014-01-01

    Chloride induced corrosion of reinforcing steel is recognized as the most common deterioration mechanism affecting reinforced concrete structures. As such, it has been in focus of research for more than thirty years. Numerous studies of chloride ingress, corrosion initiation, and corrosion propagati

  1. Hydrophobic treatment of concrete as protection against chloride penetration

    NARCIS (Netherlands)

    Vries, J. de; Polder, R.B.; Borsje, H.

    1996-01-01

    Hydrophobic treatment makes a concrete surface absorb less water and less chloride. Hydrophobic treatment was studied as a protection agninst chloride penetration from deicing salts. Test methods were designed. Nine hydrophobic products were tested, of which three complied to the requirements on fin

  2. Microwave Mapping Demonstration Using the Thermochromic Cobalt Chloride Equilibrium

    Science.gov (United States)

    Nguyen, Vu D.; Birdwhistell, Kurt R.

    2014-01-01

    An update to the thermochromic cobalt(II) chloride equilibrium demonstration is described. Filter paper that has been saturated with aqueous cobalt(II) chloride is heated for seconds in a microwave oven, producing a color change. The resulting pink and blue map is used to colorfully demonstrate Le Châtelier's principle and to illuminate the…

  3. Local impermeant anions establish the neuronal chloride concentration

    DEFF Research Database (Denmark)

    Glykys, J; Dzhala, V; Egawa, K;

    2014-01-01

    Neuronal intracellular chloride concentration [Cl(-)](i) is an important determinant of γ-aminobutyric acid type A (GABA(A)) receptor (GABA(A)R)-mediated inhibition and cytoplasmic volume regulation. Equilibrative cation-chloride cotransporters (CCCs) move Cl(-) across the membrane, but accumulat...

  4. Chlorides behavior in raw fly ash washing experiments

    International Nuclear Information System (INIS)

    Chloride in fly ash from municipal solid waste incinerators (MSWIs) is one of the obstructive substances in recycling fly ash as building materials. As a result, we have to understand the behavior of chlorides in recycling process, such as washing. In this study, we used X-ray absorption near edge structure (XANES) and X-ray diffraction (XRD) to study the chloride behavior in washed residue of raw fly ash (RFA). We found that a combination of XRD and XANES, which is to use XRD to identify the situation of some compounds first and then process XANES data, was an effective way to explain the chlorides behavior in washing process. Approximately 15% of the chlorine in RFA was in the form of NaCl, 10% was in the form of KCl, 51% was CaCl2, and the remainder was in the form of Friedel's salt. In washing experiments not only the mole percentage but also the amount of soluble chlorides including NaCl, KCl and CaCl2 decreases quickly with the increase of liquid to solid (L/S) ratio or washing frequency. However, those of insoluble chlorides decrease slower. Moreover, Friedel's salt and its related compound (11CaO.7Al2O3.CaCl2) were reliable standards for the insoluble chlorides in RFA, which are strongly related to CaCl2. Washing of RFA promoted the release of insoluble chlorides, most of which were in the form of CaCl2.

  5. Phosphatase inhibitors activate normal and defective CFTR chloride channels.

    OpenAIRE

    Becq, F; Jensen, T J; Chang, X B; Savoia, A.; Rommens, J M; Tsui, L C; Buchwald, M; Riordan, J R; Hanrahan, J W

    1994-01-01

    The cystic fibrosis transmembrane conductance regulator (CFTR) chloride channel is regulated by phosphorylation and dephosphorylation at multiple sites. Although activation by protein kinases has been studied in some detail, the dephosphorylation step has received little attention. This report examines the mechanisms responsible for the dephosphorylation and spontaneous deactivation ("rundown") of CFTR chloride channels excised from transfected Chinese hamster ovary (CHO) and human airway epi...

  6. Monte Carlo calculation of chloride diffusion in concrete

    International Nuclear Information System (INIS)

    Coefficient of chloride diffusion is calculated by applying the Fick's second law of diffusion to a chloride concentration profile. Then from the signal strength for various chlorine gamma-ray energies was then calculated at the detector of the portable D-D neutron generator based PGNAA setup. (author)

  7. 21 CFR 172.165 - Quaternary ammonium chloride combination.

    Science.gov (United States)

    2010-04-01

    ... HUMAN CONSUMPTION Food Preservatives § 172.165 Quaternary ammonium chloride combination. The food... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Quaternary ammonium chloride combination. 172.165 Section 172.165 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN...

  8. Contribution on creep polygonization study in crystals. Creep of single crystalline silver chloride and sodium chloride

    International Nuclear Information System (INIS)

    Subgrain formation and their influence on plastic behavior of materials has been studied in the case of single crystals of silver chloride and sodium chloride crept at high temperature (T > 0.5 Tmelting). It is shown that the creep rate ε is a function of the mean subgrain diameter d. For secondary creep ε ∝ dk with k = 2 for NaCl and AgCl. During secondary creep, the substructure changes continuously: sub-boundaries migrate and sub-grains rotate. We find that sub-boundaries migration accounts for 35 pc of the total strain and that subgrain misorientation θ increases linearly with strain ε: θ ∝ 0.14 ε. The stability of permanent creep seems related to the power that the substructure is able to dissipate. The possible subgrain formation mechanisms are examined. It is shown that subgrain formation is closely related to the geometrical conditions of deformation and to the heterogeneities of this later. (author)

  9. Behavior and products of mechano-chemical dechlorination of polyvinyl chloride and poly (vinylidene chloride).

    Science.gov (United States)

    Xiao, Xiao; Zeng, Zigao; Xiao, Songwen

    2008-02-28

    The mechano-chemical (MC) dechlorination of polyvinyl chloride (PVC) and polyvinylidene chloride (PVDC) was performed by mechanical milling PVC/PVDC powder with zinc powder in a planetary ball mill, and the products of dechlorination were characterized by Infrared spectra (IR), X-ray diffraction (XRD), Raman spectroscopy, gas chromatography-mass spectrometry (GC-MS), and 13C solid-state nuclear magnetic resonance (NMR). The experimental results show that PVC/PVDC can be easily dechlorinated by milling with zinc powder, and formed various kinds of inorganic and organic products. Inorganic compounds included Zn2OCl(2).2H2O, Zn5(OH)8Cl2.H2O etc., and organic products involved diamond-like carbon, carbyne fragment, polyacetylene etc. Organic products formed following the paths of dechlorination, dehydrochlorination, crosslink, and oxidation. The mechano-chemical dechlorination process of PVC/PVDC may be an effective approach for carbyne synthesizing in the appropriate condition.

  10. PHASE EQUILIBRIUM FOR THE TERNARY SYSTEM VINYL CHLORIDE-CHLORINATED POLYETHYLENE-POLY (VINYL CHLORIDE)

    Institute of Scientific and Technical Information of China (English)

    LOU Jianfeng; WENG Zhixue; HUANG Zhiming; PAN Zuren

    1991-01-01

    Swelling capacity of vinyl chloride (VC) in chlorinated polyethylene (CPE) with 25- 40 wt% Cl at temperature 30- 57 ℃ was studied and their relationships were correlated with Langmuir and Freundlich adsorption equations. A ternary phase diagram for VC-CPE-PVC was also established.In-situ polymerization conditions of CPE-g -VC were proposed and CPE content control was analyzed for the manufacturing process of CPE-g-VC graft product based on results of phase equilibrium study.

  11. Comparative effects of hydrogen chloride gas on tomato and chrysanthemum. I. Distribution and accumulation of chloride following exposure. II. Pathological anatomy of hydrogen chloride gas injury

    Energy Technology Data Exchange (ETDEWEB)

    Shriner, D.S.

    1969-01-01

    Hydrogen chloride (HCl) gas damage to plants has not been a historically important problem. However, recent practices in a number of industries, particularly glass manufacturing and pyrolysis of waste plastics, have increased the seriousness of the problem. Studies were carried out under carefully controlled exposure conditions to determine the effects of HCl gas on a relatively sensitive and a relatively resistant plant species. The macroscopic symptoms of most importance in acute damage to tomato and chrysanthemum are glazing of the lower surface, and a bifacial bronzing of interveinal and marginal areas of leaves. Microscopically, glazing was shown to be caused by a collapse of the lower epidermal cells and a partial disorganization of the spongy mesophyll of leaves. Bronzing was shown to be caused by the further collapse of the spongy mesophyll, and in some cases the palisade mesophyll and upper epidermis. Analysis of plant tissues for their free chloride content following an exposure to HCl gas was done with cell-free water extracts which were titrated on an automatic chloride titrator. On the basis of such studies, evidence suggest that the mechanism of accumulation of chlorides in plants is similar to that of fluorides, and that in subacute doses, chlorides are translocated toward the extremities of the foliar portions of the plant. In areas where a number of different types of pollution sources exist, and symptomotology is not definitive in pinpointing the source, chloride analysis of plant tissues should prove valuable as an aid to diagnosis if HCl gas was suspected.

  12. Studies on Hypokalemia Induced by Trimethyltin Chloride

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    To determine the possible relationship between plasma potassium concentration and severity of acute trimethyltin chloride (TMT) poisoning and to assess the mechanism of TMT induced hypokalemia. Methods SD rats were treated with various dosages of TMT (ip). All the indices were measured and analysed for determing their possible relations with plasma K+. Results With increase of dosage, the plasma K+ level dropped rapidly, and deaths appeared more quickly. The LDs0 of TMT (ip) was 14.7 mg/kgbw. In the low dosage group (10 mg/kgbw), the plasma K+ level dropped slowly with the lowest dosage on day 6 (4.85 mmol/L). It rose again on day 11 (5.06 mmol/L), and recoverd on day 28. The poisoning signs corresponded with decline of the span of K+ level. The plasma Na+ level dropped half an hour after TMT treatment, but recovered 24 h later. In the high dosage group (46.4 mg/kgbw), the levels of plasma K+ and Na+ fell rapidly within half an hour (P<0.05), the intracellular potassium concentration of RBC did not decrerase obviously (P>0.05), the activities of Na+-K+-ATPase and Mg2+-ATPase in RBC membrane were depressed remarkably (P<0.01, P<0.05, respectively), the plasma aldosterone concentrations rose as high as tenfold (P<0.01), the arterial blood pH fell from 7.434 to 7.258 (P<0.01),pCO2 was raised from 29.62 to 45.33 mmHg (P<0.01). In the 24 h urine test, when rats were treated with TMT (21.5 mg/kgbw, ip), urine volume, urinary potassium, sodium and chloride increased significantly in comparison with those in the controls (P<0.01). Conclusion TMT could induce hypokalemia in SD rats. The available evidence suggests that TMT can induce acute renal leakage of potassium. At the same time, a significant rise of plasma aldosterone may play an important role in promoting potassium leakage from kidney to result in severe hypokalemia with inhaling acid-base abnormalities produced, which aggravate the poisoning symptoms. In the end the rats would die of respiratory

  13. Redetermination of 1-carboxycyclohexan-1-aminium chloride

    Directory of Open Access Journals (Sweden)

    Teresa González

    2009-02-01

    Full Text Available The crystal structure of the title compound, C7H14NO2+·Cl−, was reported previously [Chacko, Srinivasan & Zand (1975. J. Cryst. Mol. Struct. 5, 353–357] from Weissenberg photographic data with R = 0.113. It has now been redetermined, providing a significant increase in the precision of the derived geometric parameters, viz. mean σ(C—C = 0.003 Å in the present work compared with 0.021 Å for the previous work. The complete cation is generated by crystallographic mirrror symmetry, with three C atoms, two O atoms and the N atom lying on the reflecting plane; the chloride anion also has m site symmetry. The crystal structure is established by a two-dimensional network of O—H...Cl and N—H...Cl hydrogen bonds, generating C12(4 and C12(7 chains, and R24(8 and R24(14 rings.

  14. Chloride, bromide and iodide scintillators with europium

    Energy Technology Data Exchange (ETDEWEB)

    Zhuravleva, Mariya; Yang, Kan

    2016-09-27

    A halide scintillator material is disclosed where the halide may comprise chloride, bromide or iodide. The material is single-crystalline and has a composition of the general formula ABX.sub.3 where A is an alkali, B is an alkali earth and X is a halide which general composition was investigated. In particular, crystals of the formula ACa.sub.1-yEu.sub.yI.sub.3 where A=K, Rb and Cs were formed as well as crystals of the formula CsA.sub.1-yEu.sub.yX.sub.3 (where A=Ca, Sr, Ba, or a combination thereof and X=Cl, Br or I or a combination thereof) with divalent Europium doping where 0.ltoreq.y.ltoreq.1, and more particularly Eu doping has been studied at one to ten mol %. The disclosed scintillator materials are suitable for making scintillation detectors used in applications such as medical imaging and homeland security.

  15. NQR in tert-butyl chloride

    Science.gov (United States)

    Brunetti, Aldo H.

    2004-03-01

    Tert-butyl chloride has been broadly studied experimentally through various techniques such as X-ray crystallography, DTA, and NMR. It was also studied experimentally through nuclear quadrupole resonance (NQR), but this study was limited and incomplete. In this paper, we present a more detailed study of TBC through the NQR of 35Cl. Our results show that near 120 K, the onset of the CH 3 groups semirotations around symmetry axis C3 takes place with an activation energy U=16.1 kJ mol -1. This intramolecular movement produces a T1 minimum near 148 K and is the dominant mechanism of the nuclear spin-lattice relaxation in phase III of this compound. In phase II of TBC, we show that there are not only methyl groups semirotations, but also semirotations of the whole molecule around a different axis from the symmetry axis C' 3 (C-Cl bond) with an activation energy of E=10.4 kJ mol -1.

  16. Denitrification of fertilizer wastewater at high chloride concentration

    DEFF Research Database (Denmark)

    Ucisik, Ahmed Süheyl; Henze, Mogens

    Wastewater from fertilizer industry is characterized by high contents of chloride concentration, which normally vary between 60 and 76 g/l. Experiments with bilogical denitrification were performed in lab-scale "fill and draw" reactors with synthetic wastewater with chloride concentrations up to 77.......4 g/l. The results of the experiments showed that biological denitrification was feasible at the extreme environmental conditions prevailing in fertilizer wastewater. Stable continuous biological denitrfication of the synthetic high chloride wastewater was performed up to 77.4 g Cl/l at 37 degree C...

  17. Calcium chloride in stabilised soil roads and runways

    Directory of Open Access Journals (Sweden)

    Harsh Vardhan

    1952-09-01

    Full Text Available Mudless, dustless, hard and all weather driving surfaces is a serious requirement of the forces.  surfacing by mixtures of definite amounts of locally available stone, gravel, sand, clay and Silt to which calculated amount of calcium chloride is added quickly compact and ultimately harden like concrete. This provides an easy, quick and economic- means of meeting the requirement.  Necessity of such surfaces, use and action of calcium chloride and resulting effects are discussed. Different methods of construction and application of calcium chloride are briefly related.

  18. Durability Analysis of Subway Station in Chloride Environment

    Directory of Open Access Journals (Sweden)

    Yang LuFeng

    2013-02-01

    Full Text Available In this study, a finite element model for chloride ions transport in saturated concrete was proposed based on the Fick’s second law of diffusion. The governing partial differential equation was solved numerically in space as a boundary-value problem and in time as an initial-value problem by means of the finite element formulations. The maximum allowable value of chloride diffusion coefficient within different locations of subway station with service life of 100a was achieved and suggestions for durability analysis of subway station in chloride environment were also proposed.

  19. The ionic product of water in concentrated tetramethylammonium chloride solutions.

    Science.gov (United States)

    Sipos, P; Bódi, I; May, P M; Hefter, G T

    1997-04-01

    The ionic product of water, pK(w) = - log[H(+)][OH(-)] has been determined in aqueous solutions of tetramethylammonium chloride over the concentration range of 0.1-5.5 M at 25 degrees C using high-precision glass electrode potentiometric titrations. pK(w) data relating to aqueous potassium and sodium chlorides at ionic strengths up to 5 M are markedly lower than the tetramethylammonium chloride results. These differences are almost certainly due to weak associations between potassium and (especially) sodium and hydroxide ions.

  20. Ionometric determination of chloride ion in circulating and waste waters

    Energy Technology Data Exchange (ETDEWEB)

    Bebeshko, G.I.; Afanas' eva, V.I.; Danielova, I.I.; Dmitriev, M.A.; Radchenko, A.F.

    1986-09-01

    The authors attempt to develop selective ionometric methods to determine chloride ion in waste and circulating waters from technological ore processing, containing significant amounts of sulfide ion and various flotation reagents. These waters contain practically no cations that form hard to dissolve compounds with chloride ion such as Ag/sup +/, Cu/sup +/, Hg/sup +/ or Pb/sup 2 +/. The chloride ion concentration in water varies between 10 and 100 mg/liter. Information is shown on the concentration of the main anions and flotation reagents in waters that were analyzed.

  1. Stochastic Modeling of Reinforced Concrete Structures Exposed to Chloride Attack

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Frier, Christian

    2003-01-01

    concentration and reinforcement cover depth are modeled by stochastic fields. The paper contains a description of the parameters to be included in a stochastic model and a proposal for the information needed to obtain values for the parameters in order to be ab le to perform reliability investigations...... the reinforcement exceeds a critical threshold value. In the present paper a stochastic model is described by which the chloride content in a reinforced concrete structure can be estimated. The chloride ingress is modeled by a 2-dimensional diffusion process and the diffusion coefficient, surface chloride...

  2. Applicability of boron-doped diamond electrode to the degradation of chloride-mediated and chloride-free wastewaters

    International Nuclear Information System (INIS)

    The electrochemical degradation of chloride-mediated and chloride-free dye wastewaters was investigated on a boron-doped diamond (BDD) electrode in comparison with that on a dimensionally stable anode (DSA), and the applicability of BDD electrode to the degradation of these two kinds of wastewaters was explored. In chloride-free wastewater, the electrochemical degradation efficiency of dye on BDD electrode was much higher than that on DSA, with a chemical oxygen demand (COD) removal of 100% and 26% for BDD and DSA, respectively. In chloride-mediated dye wastewater, COD removal was faster than that in chloride-free wastewater on both BDD and DSA electrodes with COD removal efficiencies higher than 95%, whereas the rate of COD removal on DSA was faster than that on BDD electrode. The investigation indicates that DSA is more suitable than BDD electrode in degradation of originally chloride contained dye wastewaters for the sake of energy and time saving. However, for chloride-free dye wastewaters, with the aim of environmental protection, BDD electrode is more appropriate to realize complete mineralization. At the same time, the secondary pollution can be avoided

  3. Adsorption of Tetradecylpyridinium Chloride on Aqueous Surfaces of Sodium Chloride Solutions

    OpenAIRE

    Fujio, Katsuhiko; Hayashi, Koji; Suzuki, Maki

    2014-01-01

    Surface tension of aqueous NaCl solutions of tetradecylpyridinium chloride (TPC) has been measured by the drop weight method at different NaCl concentrations from 0 to 1.000 mol dm−3 at 25◦C. Surface excess densities of tetradecylpyridinium ion (TP+), Cl− and Na+ have been obtained as functions of TPC concentration at different NaCl concentrations by applying the Gibbs adsorption isotherm to the surface tension data below the critical micelle concentration (CMC) of TPC. Surface excess densiti...

  4. Adsorption of Dodecylpyridinium Chloride on Aqueous Surfaces of Sodium Chloride Solutions

    OpenAIRE

    Fujio, Katsuhiko; TAKEUCHI, Kumiko; Suzuki, Maki

    2012-01-01

    Surface tension of aqueous NaCl solutions of dodecylpyridinium chloride (DPC) has been measured by the drop weight method at different NaCl concentrations from 0 to 1.000 mol dm-3 at 25℃. Applying the Gibbs adsorption isotherm to the surface tension data at DPC concentrations below the critical micelle concentration (CMC), surface excess densities of dodecylpyridinium ion (DP+), Cl- and Na+ have been obtained as functions of DPC concentration at different NaCl concentrations. Surface excess d...

  5. Nickel Chloride Promoted Glaser Coupling Reaction in Hot Water

    Institute of Scientific and Technical Information of China (English)

    Pin Hua LI; Lei WANG; Min WANG; Jin Can YAN

    2004-01-01

    A Glaser coupling reaction of terminal alkynes in the presence of nickel chloride without any organics and bases in hot water has been developed, which produces the corresponding homo-coupling products in good yields.

  6. Methyltrioctylammonium chloride catalysed sonochemical synthesis of acridine diones

    Indian Academy of Sciences (India)

    Bhupinder Kaur; Harish Kumar

    2013-09-01

    The greener, clean and efficient protocol for the synthesis of acridine diones derivatives has been achieved by reacting aromatic aldehyde, dimedone and amines using methyltrioctylammonium chloride (Aliquate 336) as a catalyst under ultrasonic irradiations.

  7. Use of saturated sodium chloride solution as a tissue fixative

    Directory of Open Access Journals (Sweden)

    A. Al-Saraj

    2010-01-01

    Full Text Available The present study was carried out to examine the capability of saturated sodium chloride solution as a fixative agent instead of formalin which is regarded as a carcinogenic material. For this purpose 3 rabbits were used and their livers, kidneys and spleens were exposed and removed. Neutral buffered formalin solution, saturated sodium chloride solution and distilled water were used as fixatives for specimens obtained from the first, second and third rabbits respectively. Routine histological technique was performed to prepare a stained histological sections for light microscopic examination. The result showed that the tissue sections which were obtained by using sodium chloride have the same histological features and without any artifacts when they compared with the results obtained using formalin fixation method. We conclude that the saturated sodium chloride solution can be used as a fixative agent in some circumstances when no any fixative agent is available.

  8. Thermodynamic calculation of self-diffusion in sodium chloride

    Science.gov (United States)

    Zhang, Baohua; Li, Chengbo; Shan, Shuangming

    2016-05-01

    Using the available pressure-volume-temperature equation of state of sodium chloride, we show that the self-diffusion coefficients of sodium and chloride in sodium chloride as a function of temperature and pressure can be successfully reproduced in terms of bulk elastic and expansivity data. We use a thermodynamic model that interconnects point-defect parameters with bulk properties. Our calculated diffusion coefficients and point-defect parameters, including activation enthalpy, activation entropy, and activation volume, well agree with reported experimental results when uncertainties are considered. Furthermore, the ionic conductivity of sodium chloride inferred from our predicted diffusivities of sodium through the Nernst-Einstein equation is compared with previous experimental data.

  9. Catalytic Decomposition of Methylene Chloride by Sulfated Titania Catalysts

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Catalytic decomposition of methylene chloride in air below 300℃ was studied.Sulfated titania was very effective in converting 959ppm methylene chloride selectively to CO,CO2 and HCl.Complete decomposition of methylene chloride was achieved at low temperature(275℃).It was found that the acidic property of catalyst was a determinant factor for the catalytic activity.The presence of water vapor in the feed stream remarkably reduced the catalytic activity,which could be due to the blockage of acidic sites on the surface of catalyst by water molecules.A bifunctional catalyst comprising copper oxide was developed to improve the selectivity of catalytic oxidation,which indicated that copper oxide can promote the deep oxidation of methylene chloride.The crystal form of TiO2 imposes an important influence upon the catalytic oxidation.

  10. Chloride supporting electrolytes for all-vanadium redox flow batteries.

    Science.gov (United States)

    Kim, Soowhan; Vijayakumar, M; Wang, Wei; Zhang, Jianlu; Chen, Baowei; Nie, Zimin; Chen, Feng; Hu, Jianzhi; Li, Liyu; Yang, Zhenguo

    2011-10-28

    This paper examines vanadium chloride solutions as electrolytes for an all-vanadium redox flow battery. The chloride solutions were capable of dissolving more than 2.3 M vanadium at varied valence states and remained stable at 0-50 °C. The improved stability appeared due to the formation of a vanadium dinuclear [V(2)O(3)·4H(2)O](4+) or a dinuclear-chloro complex [V(2)O(3)Cl·3H(2)O](3+) in the solutions over a wide temperature range. The all-vanadium redox flow batteries with the chloride electrolytes demonstrated excellent reversibility and fairly high efficiencies. Only negligible, if any, gas evolution was observed. The improved energy capacity and good performance, along with the ease in heat management, would lead to substantial reduction in capital cost and life-cycle cost, making the vanadium chloride redox flow battery a promising candidate for stationary applications. PMID:21922094

  11. Purification and reconstitution of chloride channels from kidney and trachea

    International Nuclear Information System (INIS)

    Chloride channels mediate absorption and secretion of fluid in epithelia, and the regulation of these channels is now known to be defective in cystic fibrosis. Indanyl-oxyacetic acid 94 (IAA-94) is a high-affinity ligand for the chloride channel, and an affinity resin based on that structure was developed. Solubilized proteins from kidney and trachea membranes were applied to the affinity matrix, and four proteins with apparent molecular masses of 97, 64, 40, and 27 kilodaltons were eluted from the column by excess IAA-94. A potential-dependent 36Cl- uptake was observed after reconstituting these proteins into liposomes. Three types of chloride channels with single-channel conductances of 26, 100, and 400 picosiemens were observed after fusion of these liposomes with planar lipid bilayers. Similar types of chloride channels have been observed in epithelia

  12. Stochastic modeling of reinforced concrete structures exposed to chloride attack

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Frier, Christian

    2004-01-01

    For many reinforced concrete structures corrosion of reinforcement is an important problem since it can result in expensive maintenance and repair actions. Further, a significant reduction of the load-bearing capacity can occur. One mode of corrosion initiation is that the chloride content around...... the reinforcement exceeds a critical threshold value. In the present paper a stochastic model is described by which the chloride content in a reinforced concrete structure can be estimated. The chloride ingress is modeled by a 2-dimensional diffusion process and the diffusion coefficient, surface chloride...... concentration and reinforcement cover depth are modeled by stochastic fields. The paper contains a description of the parameters to be included in a stochastic model and a proposal for the information needed to obtain values for the parameters in order to be able to perform reliability investigations...

  13. Chloride supporting electrolytes for all-vanadium redox flow batteries.

    Science.gov (United States)

    Kim, Soowhan; Vijayakumar, M; Wang, Wei; Zhang, Jianlu; Chen, Baowei; Nie, Zimin; Chen, Feng; Hu, Jianzhi; Li, Liyu; Yang, Zhenguo

    2011-10-28

    This paper examines vanadium chloride solutions as electrolytes for an all-vanadium redox flow battery. The chloride solutions were capable of dissolving more than 2.3 M vanadium at varied valence states and remained stable at 0-50 °C. The improved stability appeared due to the formation of a vanadium dinuclear [V(2)O(3)·4H(2)O](4+) or a dinuclear-chloro complex [V(2)O(3)Cl·3H(2)O](3+) in the solutions over a wide temperature range. The all-vanadium redox flow batteries with the chloride electrolytes demonstrated excellent reversibility and fairly high efficiencies. Only negligible, if any, gas evolution was observed. The improved energy capacity and good performance, along with the ease in heat management, would lead to substantial reduction in capital cost and life-cycle cost, making the vanadium chloride redox flow battery a promising candidate for stationary applications.

  14. Solidification of spent TBP solvent with aluminium chloride compounds

    International Nuclear Information System (INIS)

    The new techniques for processing spent TBP was investigated. It was proved that treatment of TBP containing DBP with aluminium chloride resulted in the formation of aluminium phosphate suitable for long term storage and final disposal

  15. Reinforcement corrosion in alkaline chloride media with reduced oxygen concentrations

    International Nuclear Information System (INIS)

    It is commonly considered that the corrosion of steel in concrete is controlled by the oxygen content of the pore solution and there are service life models that relate the corrosion rate to the amount of oxygen. It is also commonly believed that in water saturated conditions the oxygen content in the pores is negligible and that underwater there is no risk of depassivation and the corrosion rate is very low. However, the available data on corrosion rates in immersed conditions do not indicate such performance; on the contrary corrosion develops when sufficient chloride reaches the reinforcement. In the present paper, results are presented for tests performed in alkaline chloride solutions that were purged with nitrogen to reduce the oxygen content. The results indicate that at very low oxygen concentrations, corrosion may develop in the presence of chlorides. The presence or absence of corrosion is influenced by the amount of chloride, the corrosion potential and the steel surface condition. (authors)

  16. Chlorides behavior in raw fly ash washing experiments

    Energy Technology Data Exchange (ETDEWEB)

    Zhu Fenfen, E-mail: zhu@hse.gcoe.kyoto-u.ac.jp [Department of Urban and Environmental Engineering, Graduate School of Engineering, Katsura Campus, Kyoto University, Nishikyo-ku, Kyoto 615-8540 (Japan); Takaoka, Masaki; Oshita, Kazuyuki [Department of Urban and Environmental Engineering, Graduate School of Engineering, Katsura Campus, Kyoto University, Nishikyo-ku, Kyoto 615-8540 (Japan); Kitajima, Yoshinori; Inada, Yasuhiro [High Energy Accelerator Research Organization (KEK), Institute of Material Structure Science (IMSS), Oho 1-1, Tsukuba, Ibaraki 305-0801 (Japan); Morisawa, Shinsuke; Tsuno, Hiroshi [Department of Urban and Environmental Engineering, Graduate School of Engineering, Katsura Campus, Kyoto University, Nishikyo-ku, Kyoto 615-8540 (Japan)

    2010-06-15

    Chloride in fly ash from municipal solid waste incinerators (MSWIs) is one of the obstructive substances in recycling fly ash as building materials. As a result, we have to understand the behavior of chlorides in recycling process, such as washing. In this study, we used X-ray absorption near edge structure (XANES) and X-ray diffraction (XRD) to study the chloride behavior in washed residue of raw fly ash (RFA). We found that a combination of XRD and XANES, which is to use XRD to identify the situation of some compounds first and then process XANES data, was an effective way to explain the chlorides behavior in washing process. Approximately 15% of the chlorine in RFA was in the form of NaCl, 10% was in the form of KCl, 51% was CaCl{sub 2}, and the remainder was in the form of Friedel's salt. In washing experiments not only the mole percentage but also the amount of soluble chlorides including NaCl, KCl and CaCl{sub 2} decreases quickly with the increase of liquid to solid (L/S) ratio or washing frequency. However, those of insoluble chlorides decrease slower. Moreover, Friedel's salt and its related compound (11CaO.7Al{sub 2}O{sub 3}.CaCl{sub 2}) were reliable standards for the insoluble chlorides in RFA, which are strongly related to CaCl{sub 2}. Washing of RFA promoted the release of insoluble chlorides, most of which were in the form of CaCl{sub 2}.

  17. Determination of chloride in geological samples by ion chromatography

    Science.gov (United States)

    Wilson, S.A.; Gent, C.A.

    1983-01-01

    Samples of silicate rocks are prepared by sodium carbonate fusion and then treated by ion chromatography. The method was tested for geological standards with chloride concentration between 0.003 and 3%. Observed chloride concentrations comparedd favorably with literature values. The relative standard deviation and detection limit for the method were 8% and 7 ppm, respectively. Up to 30 determination per 24-hour period were possible. ?? 1983.

  18. Optical Studies on Sol-Gel Derived Lead Chloride Crystals

    OpenAIRE

    Rejeena, I; Lillibai, B; Nithyaja, B; Nampoori, P.N V; P. Radhakrishnan

    2013-01-01

    Optical characterization of lead chloride crystals prepared by sol-gel method is reported. The relevant sol-gel technique is used for the preparation of PbCl2 samples with five different types. In this paper, we report the absorption and fluorescence behaviour of pure, UV& IR irradiated and electric & magnetic field applied lead chloride crystal samples in solution phase at two different concentrations. Optical bandgap and emission studies of these crystals are also done.

  19. Macrocycle Synthesis by Chloride-Templated Amide Bond Formation.

    Science.gov (United States)

    Martí-Centelles, Vicente; Burguete, M Isabel; Luis, Santiago V

    2016-03-01

    A new family of pseudopeptidic macrocyclic compounds has been prepared involving an anion-templated amide bond formation reaction at the macrocyclization step. Chloride anion was found to be the most efficient template in the macrocyclization process, producing improved macrocyclization yields with regard to the nontemplated reaction. The data suggest a kinetic effect of the chloride template, providing an appropriate folded conformation of the open-chain precursor and reducing the energy barrier for the formation of the macrocyclic product. PMID:26820908

  20. cis-Dichloridobis(1,10-phenanthrolinechromium(III chloride

    Directory of Open Access Journals (Sweden)

    Xiaoli Gao

    2011-02-01

    Full Text Available In the title complex, [CrCl2(C12H8N22]Cl, the CrIII ion is situated on a twofold rotation axis and displays a slightly distorted octahedral CrCl2N4 coordination geometry. The Cr environment is composed of a cis arrangement of two 1,10-phenanthroline and two chloride ligands. The chloride counter-anion exhibits half-occupation and is equally disordered over two positions.

  1. Recovering germanium from coal ash by chlorination with ammonium chloride

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    A new process of enriching germanium from coal ash was developed. The process involves in mixing the coal ash and ammonium chloride and then roasting the mixture to produce germanium chloride that is then absorbed by dilute hydrochloric acid and hydrolyzed to germanium oxide. The germanium recovery reached to 80.2% at the optimum condition: mass ratio of NH4Cl/coal ash is 0.15, roasting temperature 400℃ and roasting time 90 min.

  2. Aqueous Chloride Operations Overview: Plutonium and Americium Purification/Recovery

    Energy Technology Data Exchange (ETDEWEB)

    Gardner, Kyle Shelton [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kimball, David Bryan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Skidmore, Bradley Evan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-09-28

    These are a set of slides intended for an information session as part of recruiting activities at Brigham Young University. It gives an overview of aqueous chloride operations, specifically on plutonium and americium purification/recovery. This presentation details the steps taken perform these processes, from plutonium size reduction, dissolution, solvent extraction, oxalate precipitation, to calcination. For Americium recovery, it details the CLEAR (chloride extraction and actinide recovery) Line, oxalate precipitation and calcination.

  3. Effect of kaolin treatment temperature on mortar chloride permeability

    OpenAIRE

    Puertas, F.; Mejía de Gutiérrez, R.; J. Torres

    2007-01-01

    The present paper discusses the results of chloride resistance tests conducted on ordinary Portland cement (OPC) mortars containing a Colombian kaolin pre-treated at temperatures of from 600 to 800 ºC. The resulting metakaolin (MK) was added to OPC mortar mixes in proportions of 10 and 20% by cement weight. The mortars were compared for physical and chemical properties, including capillary absorption, chloride permeability and pore microstructure as assessed by mercury porosimetry....

  4. Extraction and immobilization of simulated pyrometallurgical chloride waste in Zeolite

    International Nuclear Information System (INIS)

    Zeolites are effective media for the removal and immobilization of fission products waste from pyrometallurgical reprocessing of nuclear fuels. In the present study, equilibration experiments between zeolite 4A and a simulated: pyrometallurgical chloride waste were carried out. Several batches of equilibration were carried out by varying the zeolite to salt (Z/S) ratio. The effects of Z/S on the extraction behaviour of the waste chloride salts were explored. (author)

  5. The effect of chloride and sulfate on Completely Recyclable Concrete

    OpenAIRE

    Arvaniti, E.; De Schepper, M.; De Belie, N.; De Buysser, K.; Van Driessche, I.

    2013-01-01

    Completely Recyclable Concrete (CRC) is intended to be recycled as raw material within the cement production from a predesign stage. However, concrete contributions that are exposed to aggressive environments (e.g. industrial and seaside buildings), could carry elements such as chlorides, sulfur and alkalis after demolition, which will end up in the recycled material. The aim of this study is to better understand the influence of chloride and sulfur in CRC on the final clinker properties. The...

  6. Hafnium extraction from acidic chloride solutions by Cyanex 923

    Energy Technology Data Exchange (ETDEWEB)

    El-Ammouri, E.; Distin, P.A. [McGill Univ., Montreal (Canada)

    1996-08-01

    Hafnium extraction from hydrochloric acid/lithium chloride solutions into Cyanex 923 in kerosene has been studied. Variables investigated were hydrochloric acid, total chloride and hafnium concentrations in the aqueous phase, and extractant/modifier (isodecanol) levels in the organic phase. Hafnium is considered to load as the tetrachloride complex forming a disolvate with Cyanex 923. Results are compared with equivalent data for zirconium extraction. 14 refs., 7 figs., 2 tabs.

  7. Intracellular chloride concentration of the mouse vomeronasal neuron

    OpenAIRE

    Kim, Sangseong; Ma, Limei; Unruh, Jay; McKinney, Sean; Yu, C. Ron

    2015-01-01

    Background The vomeronasal organ (VNO) is specialized in detecting pheromone and heterospecific cues in the environment. Recent studies demonstrate the involvement of multiple ion channels in VNO signal transduction, including the calcium-activated chloride channels (CACCs). Opening of CACCs appears to result in activation of VNO neuron through outflow of Cl− ions. However, the intracellular Cl− concentration remains undetermined. Results We used the chloride ion quenching dye, MQAE, to measu...

  8. Computational modelling of chloride ion transport in reinforced concrete

    OpenAIRE

    Meijers, S.J.H.; Bijen, J.M.J.M.; De Borst, R.; Fraaij, A.L.A.

    2001-01-01

    Exposure to a saline environment is a major threat with respect to the durability of reinforced concrete structures. The chloride ions, which are present in seawater and de-icing salts, are able to penetrate the concrete up to the depth of the reinforcement. They can eventually trigger a pitting corrosion process. The assessment of a corrosion-free service life of concrete structures is of paramount economic interest. However, the modelling of the ingress of chloride ions is complicated due t...

  9. Large Scale Synthesis of Carbon Nanofibres on Sodium Chloride Support

    OpenAIRE

    Ravindra Rajarao; Badekai Ramachandra Bhat

    2012-01-01

    Large scale synthesis of carbon nanofibres (CNFs) on a sodium chloride support has been achieved. CNFs have been synthesized using metal oxalate (Ni, Co and Fe) as catalyst precursors at 680 C by chemical vapour deposition method. Upon pyrolysis, this catalyst precursors yield catalyst nanoparticles directly. The sodium chloride was used as a catalyst support, it was chosen because of its non‐toxic and water soluble nature. Problems, such as the detrimental effect of CNFs, the detrimental ef...

  10. Durability Analysis of Subway Station in Chloride Environment

    OpenAIRE

    Yang LuFeng; Yu Bo; Hong Bin

    2013-01-01

    In this study, a finite element model for chloride ions transport in saturated concrete was proposed based on the Fick’s second law of diffusion. The governing partial differential equation was solved numerically in space as a boundary-value problem and in time as an initial-value problem by means of the finite element formulations. The maximum allowable value of chloride diffusion coefficient within different locations of subway station with service life of 100a was achieved and suggestions ...

  11. Influence of cracks on chloride penetration in concrete

    OpenAIRE

    Audenaert, K.; Schutter, G. de; MARSAVINA, L

    2009-01-01

    Chloride initiated reinforcement corrosion is the main durability problem for concrete structures in a marine environment. If the chlorides reach the reinforcement steel, it will depassivate and start to corrode in presence of air and water. Since the corrosion products have a larger volume than the initial products, concrete stresses are induced, leading to spalling and degradation of the concrete structures. If cracks, caused by early drying, thermal effects, shrinkage movements or overstre...

  12. Chloride ion transport performance in slag mortar under fatigue loading

    Institute of Scientific and Technical Information of China (English)

    WANG CaiHui; SUN Wei; JIANG JinYang; HAN JianDe; YE BangTu

    2012-01-01

    The transport performance of chloride ion in slag cement mortar was investigated experimentally.In the self-designed experiment,fatigue loading was coupled simultaneously with ion transportation process,the diffusion law of chloride ion was obtained by titration and the AE (acoustic emission) technique was employed to detect the real-time damage distribution in the mortar specimen.The results for fatigue stress levels of 0.3,0.4 and 0.5 and slag contents of 0,10%,30% and 50% showed that fatigue loading accelerated the diffusion of chloride ion in mortar and the acceleration effect increased with the increase in stress levels.Slag addition was found to improve anti-chloride ion erosion performance effectively with the best substitution level at 30%,because the inhibition effect of slag on chloride ion diffusion diminished when the slag content exceeded 30%.The comparative experiments indicated that dynamic load has a significant effect on the transport performance of chloride ion in slag cement mortar.

  13. Removal of chloride from electric arc furnace dust.

    Science.gov (United States)

    Chen, Wei-Sheng; Shen, Yun-Hwei; Tsai, Min-Shing; Chang, Fang-Chih

    2011-06-15

    Electric arc furnace (EAF) dust with high chloride content increases the threat of dioxin emissions and the high chloride content reduces the value of recycled zinc oxide produced by EAF dust recycling plants. This study conducts a number of laboratory experiments to determine the technical feasibility of a new dechlorination method. These methods consist of a series of roasting processes and water washing processes. In the roasting process, EAF dust was heated in a tube furnace to evaluate the parameters of atmospheric conditions, roasting temperature, and roasting time. Results indicate that sulfation roasting is more efficient in reducing chloride content than other roasting processes. The water washing process can totally remove water-soluble chloride at a solid to liquid ratio of 1:10. However, the remaining water-insoluble substance is difficult to dechlorinate. For example, lead chloride forms a hydroxyl-halide (PbOHCl) and lead chloride carbonate (Pb(2)CO(3)Cl(2)) agglutinative matrix that is hard to wash away.

  14. Congenital chloride diarrhea: a review of twelve Arabian children

    Directory of Open Access Journals (Sweden)

    Elrefae F

    2013-06-01

    Full Text Available Fawaz Elrefae,1 Ahmed Farag Elhassanien,2 Hesham Abdel-Aziz Alghiaty3 1Pediatric Gastroenterology, Al-Adan Hospital, Kuwait; 2Faculty of Medicine, Elmansoura University, El Mansoura, El Dakahleya, Egypt; 3Faculty of Medicine, Benha University, Egypt Background: Congenital chloride diarrhea (CCD, a rare autosomal recessive disorder, is characterized by sustained watery diarrhea (due to defect of active Chloride/HCO3 exchange in the ileum and colon with high fecal chloride. Objective: To spotlight the common presentation of CCD for early management and prevention of complications. Subjects and methods: This is a retrospective case series study of patients diagnosed as CCD who were followed up in the pediatric department of Al-Adan Hospital, Kuwait. Results: Twelve patients diagnosed with CCD were born to consanguineous parents; had antenatal history of intrauterine growth retardation (IUGR; polyhydramnios; and distended hypoechoic fetal bowel; and presented with abdominal distension, hypotonia and muscle wasting. 90% of patients had maternal hypertension and 75% of patients had absence of normal meconium at birth. Our patients showed a decrease in serum sodium, potassium, chloride and urine chloride. Conclusion: A high level of suspicion for an early diagnosis of CCD should be considered for any infant presenting with chronic diarrhea, especially in the presence of consanguineous marriage, and the characteristic features in antenatal ultrasound. Thus, allowing for early investigations and appropriate management. Keywords: congenital chloride diarrhea, children, chronic diarrhea, metabolic alkalosis, prenatal diagnosis

  15. Stabilizing Plutonium oxide material containing Chloride salts at PFP

    International Nuclear Information System (INIS)

    PFP had over 900 items, weighing more than 1100 kg consisting of impure plutonium oxides referred to as high chloride content plutonium oxides. Tests were conducted to examine items for physical characteristics. After 17 years of storage, the inner food-pack cans maintained integrity with very little evidence of corrosion. Items were washed with water to remove chloride salts. Chloride was readily soluble with plutonium concentrations less than 0.05 g/L in wash solution from all but one of seven items. Washed material was calcined at 1000 C. The calcined material passed the storage test for less than 0.5% water. Unopened items were examined using gamma energy analysis to determine if a prompt gamma (n, x) interaction could be used to screen out items with low chloride concentrations. The prompt gamma was not measurable. A 2168 keV gamma from the (α, x) interaction with chloride correlated within 10% of the chloride concentration measured from washing the item with water

  16. DEVELOPMENTAL TOXICITY OF COPPER CHLORIDE, METHYLENE CHLORIDE,AND 6-AMINONICOTINAMIDE TO EMBRYOS OF THE GRASS SHRIMPPALAEMONETES PUGIO

    Science.gov (United States)

    Embryos of estuarine grass shrimp Palaemonetes pugio have demonstrated sensitivity to various solvents and petroleum products, indicating utility for evaluating estuarine contamination. Testing was performed to establish concentration-response curves for methylene chloride, cop...

  17. A small synthetic molecule functions as a chloride-bicarbonate dual-transporter and induces chloride secretion in cells.

    Science.gov (United States)

    Liu, Peng-Yun; Li, Shing-To; Shen, Fang-Fang; Ko, Wing-Hung; Yao, Xiao-Qiang; Yang, Dan

    2016-05-31

    A C2 symmetric small molecule composed of l-phenylalanine and isophthalamide was found to function as a Cl(-)/HCO3(-) dual transporter and self-assemble into chloride channels. In Ussing-chamber based short-circuit current measurements, this molecule elicited chloride-dependent short-circuit current (Isc) increase in both Calu-3 cell and CFBE41o-cell (with F508del mutant CFTR) monolayers. PMID:27188496

  18. Ab initio Investigations of the Equilibria between Trichlorothioacetyl Chloride, Tetrachlorothiirane, and Trichloroethenesulfenyl Chloride, their Reactants and Decomposition Products

    DEFF Research Database (Denmark)

    Pedersen, Kim Vestergaard; Christensen, Henrik; Shim, Irene;

    2004-01-01

    Trichlorothioacetyl chloride 1, tetrachlorothiirane 2, and trichloroethenesulfenyl chloride 3 and the equilibria between them have been investigated by ab initio Hartree-Fock (HF), Møller-Plesset second order perturbation (MP2) calculations, and by Gaussian-3 theory, G3(MP2). The transition state...... of the isomerization reactions have been identified. Also investigated were possible reactions leading to the isomers and their possible decomposition products. The results show that the unobserved isomerization reactions are feasible....

  19. Technical note: Could benzalkonium chloride be a suitable alternative to mercuric chloride for preservation of seawater samples?

    OpenAIRE

    Gloël, J.; Robinson, C.; Tilstone, G. H.; Tarran, G.; J. Kaiser

    2015-01-01

    Instrumental equipment unsuitable or unavailable for fieldwork as well as lack of ship space can necessitate the preservation of seawater samples prior to analysis in a shore-based laboratory. Mercuric chloride (HgCl2) is routinely used for such preservation, but its handling and subsequent disposal incur environmental risks and significant expense. There is therefore a strong motivation to find less hazardous alternatives. Benzalkonium chloride (BAC) has been used previousl...

  20. Technical Note: Could benzalkonium chloride be a suitable alternative to mercuric chloride for preservation of seawater samples?

    OpenAIRE

    Gloël, J.; Robinson, C.; Tilstone, G. H.; Tarran, G.; J. Kaiser

    2015-01-01

    Instrumental equipment unsuitable or unavailable for fieldwork as well as lack of ship space can necessitate the preservation of seawater samples prior to analysis in a shore-based laboratory. Mercuric chloride (HgCl2) is routinely used for such preservation, but its handling and subsequent disposal incur significant risks and expense. Benzalkonium chloride (BAC) has been used previously for freshwater samples. Here, we assess BAC as a less hazardous alterna...

  1. 40 CFR 61.63 - Emission standard for vinyl chloride plants.

    Science.gov (United States)

    2010-07-01

    ... formation and purification: The concentration of vinyl chloride in each exhaust gas stream from any... 40 Protection of Environment 8 2010-07-01 2010-07-01 false Emission standard for vinyl chloride... for Vinyl Chloride § 61.63 Emission standard for vinyl chloride plants. An owner or operator of...

  2. Characterization of the lanthanum chloride scintillation detector

    International Nuclear Information System (INIS)

    This paper reports about the investigations on the performance of the new earth-rare halide Scintillator, the LaCl3:10%Ce, which has been discovered with attractive scintillation properties: fast, efficient, and high-energy resolution. The combination of good brightness and linear response has naturally resulted in a very good energy resolution, whereas the fast decay time promoted counting applications at very high rate and very fast timing resolution. Energy resolutions of (2.99±0.02) %, (8.66±0.02) %, and (2.05±0.01) % have been achieved by exciting the detector with 662 keV 137Cs, 122 keV 152Eu, and 1332.5 keV 60Co sources respectively, at room temperature. The variations of the resolution as a function of both shaping time and high voltage have been studied and found to be relatively linear. The timing resolution was also studied. The value of 1.07 ns FWHM has been recorded with LaCl3:10%Ce and BaF2 detectors operating in coincidence mode, using 1333.5 keV γ-ray 60Co peak. Compared to similar studies, this timing resolution was worse than expected even if the exciting radioactive sources used in the two experiments were different. The efficiency values of (0.24±0.01)%, (0.01±0.01)% and (0.09±0.01)% were obtained with laboratory 137Cs, 152Eu, 60Co isotopes respectively. These detector efficiency values were very low, due to the smaller detector sizes used in these earlier crystals and to the large detector-source-distance used in this experiment. The Lanthanum Chloride Scintillator detector is hygroscopic and relatively expensive compared to established scintillators. In addition, it carries internal contamination in 138La and 227Ac for larger thicknesses. Nevertheless, the energy resolution figures achieved, twice as good as that of NaI(Tl), are in good agreement with those reported elsewhere. They credit the scintillation detectors as good challengers of semiconductor-based detectors, allowing their application fields to be extended. (author)

  3. [Pulmonary manifestations of polyvinyl chloride exposure].

    Science.gov (United States)

    Süyür, Hüseyin; Bayram, Nazan; Aydın, Neriman; Uyar, Meral; Gündoğdu, Nevhiz; Elbek, Osman

    2011-01-01

    There is currently no national data on the effects of polyvinyl chloride (PVC) exposure on pulmonary function. In this study we recruited workers and administrative staff from two PVC plants between July 2008 and July 2009. A questionnaire, pulmonary function tests, carbon monoxide diffusion capacity, and peak flows were recorded. Particulate matter analyses were performed by the Adana Central Laboratory of the Directorate of Occupational Health and Safety. Data were analyzed with SPSS 13.0 software. Nine of the 147 subjects were female. The incidence of a cough was more common in the administrative group. Of the study population, 59.1% were smokers. Tobacco addiction significantly increased cough and dyspnea [OR= 1.10 (1.00-1.20, 95% CI) p= 0.007 and OR= 1.08 (1.02-1.14, 95% CI), p= 0.008, respectively]. Dust exposure was correlated with the incidence of a cough [OR= 0.20 (0.04-0.80, 95% CI) p= 0.008]. The period of work correlated with sputum production [OR= 1.00 (1.00-1.02, 95% CI) p= 0.044]. The FVC% was significantly higher in the administrative group, and FEV1/FVC and DLCO were higher in the exposed group. Tobacco addiction increased the risk of airflow limitation, as evaluated by FEV1/FVC < 70% and FEF25-75 < 50% [OR= 1.15 (1.06-1.25, 95% CI) p= 0.001 and OR= 1.09 (1.02-1.17, 95% CI) p= 0.010, respectively]. Tobacco addiction and increasing duration of work had a negative influence on DLCO in the exposed group (r= -0.270, p= 0.025 and r= -0.210, p= 0.037). In the exposed group PEF variability was significantly greater on workdays, compared with rest days. This study shows that tobacco consumption has a greater affect on the airways than PVC dust exposure. A median of 36 months exposure to PVC dust had no significant impact on pulmonary function parameters, except for DLCO and PEF variability.

  4. Henry’s constant of carbon dioxide-aqueous deep eutectic solvent (choline chloride/ethylene glycol, choline chloride/glycerol, choline chloride/malonic acid) systems

    International Nuclear Information System (INIS)

    Highlights: • A new set of Henry’s constant for the system carbon dioxide-aqueous deep eutectic solvents were measured. • The DESs used were: ethaline, glyceline, and maline. • The measured data were reported as functions of temperature and composition. • The measured data were represented satisfactorily by the applied correlations. -- Abstract: In this study, we present a new set of Henry’s constant data for the system carbon dioxide-aqueous deep eutectic solvent (DES) (20 to 80 wt% DES) at T = (303.15, 308.15, and 313.15) K. The DESs used were choline chloride-based: ethaline (choline chloride/ethylene glycol), glyceline (choline chloride/glycerol), and maline (choline chloride/malonic acid). A differential Henry’s coefficient model was used to describe the behaviour of Henry’s constant, and correlate it with temperature and concentration of DES in the aqueous DES solution. The correlation was found satisfactory such that the proposed model can be used in engineering calculations with reasonable accuracy

  5. Resistance of Alkali-Activated Slag Concrete to Chloride-Induced Corrosion

    OpenAIRE

    Joon Woo Park; Ki Yong Ann; Chang-Geun Cho

    2015-01-01

    The corrosion resistance of steel in alkali-activated slag (AAS) mortar was evaluated by a monitoring of the galvanic current and half-cell potential with time against a chloride-contaminated environment. For chloride transport, rapid chloride penetration test was performed, and chloride binding capacity of AAS was evaluated at a given chloride. The mortar/paste specimens were manufactured with ground granulated blast-furnace slag, instead of Portland cement, and alkali activators were added ...

  6. Simulation of Chloride Diffusion in Cracked Concrete with Different Crack Patterns

    OpenAIRE

    Xiao-Yong Wang; Li-Na Zhang

    2016-01-01

    Chloride-induced corrosion of steel rebar is one of the primary durability problems for reinforced concrete structures in marine environment. Furthermore, if the surfaces of concrete structures have cracks, additional chloride can penetrate into concrete through cracked zone. For chloride ingression into cracked concrete, former researches mainly focus on influence of crack width on chloride diffusion coefficients. Other crack characteristics, such as chloride depth, crack shape (equal-width ...

  7. Commercial Scale Cucumber Fermentations Brined with Calcium Chloride Instead of Sodium Chloride.

    Science.gov (United States)

    Pérez-Díaz, I M; McFeeters, R F; Moeller, L; Johanningsmeier, S D; Hayes, J; Fornea, D S; Rosenberg, L; Gilbert, C; Custis, N; Beene, K; Bass, D

    2015-12-01

    Development of low salt cucumber fermentation processes present opportunities to reduce the amount of sodium chloride (NaCl) that reaches fresh water streams from industrial activities. The objective of this research was to translate cucumber fermentation brined with calcium chloride (CaCl2 ) instead of NaCl to commercial scale production. Although CaCl2 brined cucumber fermentations were stable in laboratory experiments, commercial scale trials using 6440 L open-top tanks rapidly underwent secondary cucumber fermentation. It was understood that a limited air purging routine, use of a starter culture and addition of preservatives to the cover brine aids in achieving the desired complete cucumber fermentation. The modified process was used for subsequent commercial trials using 12490 and 28400 L open-top tanks packed with variable size cucumbers and from multiple lots, and cover brines containing CaCl2 and potassium sorbate to equilibrated concentrations of 100 and 6 mM, respectively. Lactobacillus plantarum LA0045 was inoculated to 10(6) CFU/mL, and air purging was applied for two 2-3 h periods per day for the first 10 d of fermentation and one 2-3 h period per day between days 11 and 14. All fermentations were completed, as evidenced by the full conversion of sugars to lactic acid, decrease in pH to 3.0, and presented microbiological stability for a minimum of 21 d. This CaCl2 process may be used to produce fermented cucumbers intended to be stored short term in a manner that reduces pollution and waste removal costs. PMID:26512798

  8. Commercial Scale Cucumber Fermentations Brined with Calcium Chloride Instead of Sodium Chloride.

    Science.gov (United States)

    Pérez-Díaz, I M; McFeeters, R F; Moeller, L; Johanningsmeier, S D; Hayes, J; Fornea, D S; Rosenberg, L; Gilbert, C; Custis, N; Beene, K; Bass, D

    2015-12-01

    Development of low salt cucumber fermentation processes present opportunities to reduce the amount of sodium chloride (NaCl) that reaches fresh water streams from industrial activities. The objective of this research was to translate cucumber fermentation brined with calcium chloride (CaCl2 ) instead of NaCl to commercial scale production. Although CaCl2 brined cucumber fermentations were stable in laboratory experiments, commercial scale trials using 6440 L open-top tanks rapidly underwent secondary cucumber fermentation. It was understood that a limited air purging routine, use of a starter culture and addition of preservatives to the cover brine aids in achieving the desired complete cucumber fermentation. The modified process was used for subsequent commercial trials using 12490 and 28400 L open-top tanks packed with variable size cucumbers and from multiple lots, and cover brines containing CaCl2 and potassium sorbate to equilibrated concentrations of 100 and 6 mM, respectively. Lactobacillus plantarum LA0045 was inoculated to 10(6) CFU/mL, and air purging was applied for two 2-3 h periods per day for the first 10 d of fermentation and one 2-3 h period per day between days 11 and 14. All fermentations were completed, as evidenced by the full conversion of sugars to lactic acid, decrease in pH to 3.0, and presented microbiological stability for a minimum of 21 d. This CaCl2 process may be used to produce fermented cucumbers intended to be stored short term in a manner that reduces pollution and waste removal costs.

  9. Effect of n-tetradecanol on the extraction of iron(III), cobalt(II), and zinc(II) chlorides with tri-n-dodecylammonium chloride

    International Nuclear Information System (INIS)

    Equations are proposed to describe the reduction in the partition coefficients of metal chlorides in amine extractant systems following the addition of alcohols. The equations include two empirical factors: solvation parameters for amine chloride and the compound undergoing extraction. These parameters can be found from independent data. The equations have been used to describe the extraction of micro amounts of iron(III), cobalt(II), and zinc(II) chlorides by tridodecylammonium chloride in the presence of n-tetradecanol

  10. A spectroscopic study of uranium species formed in chloride melts

    International Nuclear Information System (INIS)

    The chlorination of uranium metal or uranium oxides in chloride melts offers an acceptable process for the head-end of pyrochemical reprocessing of spent nuclear fuels. The reactions of uranium metal and ceramic uranium dioxide with chlorine and with hydrogen chloride were studied in the alkali metal chloride melts, NaCl-KCl at 973K, NaCl-CsCl between 873 and 923K and LiCl-KCl at 873K. The uranium species formed therein were characterized from their electronic absorption spectra measured in situ. The kinetic parameters of the reactions depend on melt composition, temperature and chlorinating agent used. The reaction of uranium dioxide with oxygen in the presence of alkali metal chlorides results in the formation of alkali metal uranates. A spectroscopic study, between 723 and 973K, on their formation and their solutions was undertaken in LiCl, LiCl-KCl eutectic and NaCl-CsCl eutectic melts. The dissolution of uranium dioxide in LiCl-KCl eutectic at 923K containing added aluminium trichloride in the presence of oxygen has also been investigated. In this case, the reaction leads to the formation of uranyl chloride species. (author)

  11. Separating refractory and non-refractory particulate chloride and estimating chloride depletion by aerosol mass spectrometry in a marine environment

    Directory of Open Access Journals (Sweden)

    I. Nuaaman

    2015-01-01

    Full Text Available Aerosol composition and concentration measurements along the coast of California were obtained using an Aerodyne high-resolution time-of-flight aerosol mass spectrometer (HR-AMS onboard the research vessel Atlantis during the CalNex study in 2010. This paper focuses on the measurement of aerosol chloride using the HR-AMS that can be ambiguous in regions with significant quantities of sea salt aerosols. This ambiguity arises due to large differences in the sensitivity of the HR-AMS to refractory chloride species (i.e., NaCl and non refractory chloride species (i.e., NH4Cl, HCl, etc.. Using the HR-AMS, the aerosol chloride signal is typically quantified using ion signals for 35Cl+, H35Cl+, 37Cl+ and H37Cl+ (HxCl+. During this study, the highest aerosol chloride signal was observed during sea sweep experiments when the source of the aerosol chloride was NaCl present in artificially generated sea salt aerosols even though the HR-AMS has significantly lower sensitivity to such refractory species. Other prominent ion signals that arise from NaCl salt were also observed at m/z 22.99 for Na+ and m/z 57.96 for Na35Cl+ during both sea sweep experiments and during periods of ambient measurements. Thus, refractory NaCl contributes significantly to the HxCl+ signal, interfering with attempts to quantify non sea salt chloride (nssCl. It was found that during ambient aerosol measurements, the interference in the HxCl+ signal from sea salt chloride (ssCl was as high as 89%, but with a study wide average of 10%. The Na35Cl+ ion signal was found to be a good tracer for NaCl. We outline a method to establish nssCl in the ambient aerosols by subtracting the sea salt chloride (ssCl signal from the HxCl+ signal. The ssCl signal is derived from the Na35Cl+ ion tracer signal and the HxCl+ to Na35Cl+ ratio established from the sea sweep experiments. Ambient submicron concentrations of ssCl were also established using the

  12. Molten Triazolium Chloride Systems as New Aluminum Battery Electrolytes

    DEFF Research Database (Denmark)

    Vestergaard, B.; Bjerrum, Niels; Petrushina, Irina;

    1993-01-01

    The possibility of using molten mixtures of 1,4-dimethyl-1,2,4-triazolium chloride (DMTC) and aluminum chloride (AlCl3) as secondary battery electrolytes was studied, in some cases extended by the copresence of sodium chloride. DMTC-AlCl, mixtures demonstrated high specific conductivity in a wide......-170-degrees-C) depending on melt acidity and anode material. DMTC, being specifically adsorbed and reduced on the tungsten electrode surface, had an inhibiting effect on the aluminum reduction, but this effect was suppressed on the aluminum substrate. An electrochemical process with high current density (tens...... of milliamperes per square centimeter) was observed at 0.344 V on the acidic sodium tetrachloroaluminate background, involving a free triazolium radical mechanism. Molten DMTC-AlCl3 electrolytes are acceptable for battery performance and both the aluminum anode and the triazolium electrolyte can be used as active...

  13. Cystic fibrosis with normal sweat chloride concentration: case report

    Directory of Open Access Journals (Sweden)

    Silva Filho Luiz Vicente Ferreira da

    2003-01-01

    Full Text Available Cystic fibrosis is a genetic disease usually diagnosed by abnormal sweat testing. We report a case of an 18-year-old female with bronchiectasis, chronic P. aeruginosa infection, and normal sweat chloride concentrations who experienced rapid decrease of lung function and clinical deterioration despite treatment. Given the high suspicion ofcystic fibrosis, broad genotyping testing was performed, showing a compound heterozygous with deltaF508 and 3849+10kb C->T mutations, therefore confirming cystic fibrosis diagnosis. Although the sweat chloride test remains the gold standard for the diagnosis of cystic fibrosis, alternative diagnostic tests such as genotyping and electrophysiologic measurements must be performed if there is suspicion of cystic fibrosis, despite normal or borderline sweat chloride levels.

  14. Novel vanadium chloride/polyhalide redox flow battery

    Science.gov (United States)

    Skyllas-Kazacos, Maria

    This paper describes a novel redox flow cell which employs a polyhalide solution in the positive half-cell electrolyte and a vanadium(II)/vanadium(III) chloride redox couple as the negative half-cell electrolyte. During charging, the bromide ions in the positive half-cell are considered to undergo oxidation to the polyhalide ion Br 2Cl -; the formal potential of this couple is about 0.8 V versus the saturated calomel electrode (SCE). When combined with a formal potential of around -0.5 V versus SCE for the V(III)/V(III) coupled in the chloride supporting electrolyte, an overall cell potential of approximately 1.3 V would be expected for the vanadium chloride/polyhalide redox flow cell.

  15. Chloride channels of platelets%血小板氯通道

    Institute of Scientific and Technical Information of China (English)

    陈晓琳; 尹松梅

    2004-01-01

    Chloride channels distribute widely in the body, and participate in many physiological actions and regulatory processes. Based on their physiological roles and molecular structures, six kinds of chloride channels have been identified: (1) The chloride channels family; (2) Cystic fibrosis transmembrane conductance regulator; (3) Swelling-activated chloride channels; (4) Calcium-activated chloride channels; (5) The p64 (CLIC) gene family; (6) γ-aminobutyric acid and glycine receptors. The chloride channels do exist in platelets, and their appearances are dependent on the presence of intracellular calcium. Blocking agents of chloride channels inhibit the thrombin-activated platelet aggregation and the elevation of the intracellular calcium concentration in a dose-dependent manner. It is suggested that chloride channels play a role in the activation of platelets. In addition, chloride channels act on both the cell volume regulation and the intracellular pH regulation in platelets.

  16. Microreactor Technology for On-Site Production of Methyl Chloride

    OpenAIRE

    Schmidt, S A.; Vajglová, Z. (Zuzana); Eränen, K.; Murzin, D.Y.; Salmi, T

    2014-01-01

    A reactor setup consisting of two stainless steel microreactors [gas-phase microreactor (GPMR)-mix from the Institut für Mikrotechnik Mainz (IMM)] coupled in series was used for production of methyl chloride by hydrochlorination of methanol. The catalyst was γ-alumina on microreactor platelets. The influence of temperature on the methanol conversion and methyl chloride selectivity was investigated. A maximum conversion of 97.6% and a selectivity of 98.8% were reached at 340°C, which is c...

  17. Inhibitory effects of beryllium chloride on rat liver microsomal enzymes.

    Science.gov (United States)

    Teixeira, C F; Yasaka, W J; Silva, L F; Oshiro, T T; Oga, S

    1990-04-30

    A single i.v. dose (0.1 mmol Be2+/kg) of beryllium chloride prolonged the duration of pentobarbital-induced sleep and zoxazolamine-induced paralysis, in rats. The effects are correlated with changes of the pharmacokinetic parameters and with the in vitro inhibition of both aliphatic and aromatic hydroxylation of pentobarbital and zoxazolamine. In vitro N-demethylation of meperidine and aminopyrine was partially inhibited while O-demethylation of quinidine was unaffected by liver microsomes of rats pretreated with beryllium salt. The findings give clues that beryllium chloride inhibits some forms of cytochrome P-450, especially those responsible for hydroxylation of substrates, like pentobarbital and zoxazolamine.

  18. Venous uptake of /sup 201/Tl as thallous chloride

    Energy Technology Data Exchange (ETDEWEB)

    Silberstein, E.B.; Thomas, S.R. (Cincinnati Univ., OH (USA). Coll. of Medicine); Robbins, P.J.; Fortman, D.L. (Office of Science and Technology, Cincinnati, OH (USA). Food and Drug Administration, Nuclear Medicine Lab.); Sill, P.

    1984-05-01

    Thallium-201, injected as thallous chloride, has been found to adhere to or be taken up by the vein into which it is injected, permitting images to be obtained of human veins up to 4 h following injection. A digoxin-insensitive rat vein model also retained /sup 201/Tl but for shorter periods of time. /sup 201/Tl uptake is independent of the solution into which it is introduced, whether 5% dextrose or 0.9% sodium chloride. This technique permits multiple delayed views of normal veins to be obtained but is of uncertain value in the evaluation of thrombophlebitis of the calf because of rather poor resolution and high cost.

  19. An experiment on multibubble sonoluminescence spectra in sodium chloride solution

    Institute of Scientific and Technical Information of China (English)

    CHEN Zhan; XU JunFeng; HUANG Wei; CHEN WeiZhong; MIAO GuoQing

    2008-01-01

    We investigated experimentally the spectra of MBSL in sodium chloride water solution with krypton as dissolved gas. We observed and compared the spectra of hydroxyl ion at 310 nm and that of sodium atom at 589 nm. It has been found that under the same experimental condition, the intensity of sodium atom spectra is obviously higher than that of the hydroxyl ion spectra, and is more sensitive to the experimental condition. The krypton content, the concentration of sodium chloride solution, and the driving sound pressure obviously affect the spectra intensity in certain range.

  20. Stochastic Models for Chloride-Initiated Corrosion in Reinforced Concrete

    DEFF Research Database (Denmark)

    Engelund, Svend; Sørensen, John Dalsgaard

    Corrosion of the reinforcement in concrete structures can lead to a substantial decrease of the load-bearing capacity. One mode of corrosion initiation is when the chloride content around the reinforcement exceeds a threshold value. In the present paper a statistical model is developed by which...... the chloride content in a 1reinforced concrete structure can be predicted. The model parameters are estimated on the basis of measurements. The distribution of the time to initiation of corrosion is estimated by FORMISORM-analysis....

  1. Stochastic Models for Chloride-Initiated Corrosion in Reinforced Concrete

    DEFF Research Database (Denmark)

    Engelund, S.; Sørensen, John Dalsgaard

    1996-01-01

    Corrosion of the reinforcement in concrete structures can lead to a substantial decrease of the load-bearing capacity. One mode of corrosion initiation is when the chloride content around the reinforcement exceeds a threshold value. In the present paper a statistical model is developed by which...... the chloride content in a reinforced concrete structure can be predicted. The model parameters are estimated on the basis of measurements. The distribution of the time to initiation of corrosion is estimated by FORM/SORM-analysis....

  2. Chronic effects of mercuric chloride ingestion on rat adrenocortical function

    Energy Technology Data Exchange (ETDEWEB)

    Agrawal, R.; Chansouria, J.P.N. (Banaras Hindu Univ., Varanasi (India))

    1989-09-01

    Mercurial contamination of environment has increased. Mercury accumulates in various organs and adversely affects their functions. Some of the most prominent toxic effects of inorganic mercury compounds include neurotoxicity, hepatotoxicity and nephrotoxicity. Besides this, mercury has also been reported to affect various endocrine glands like pituitary, thyroid, gonadal and adrenal glands. There have been no reports on the toxic effects of chronic oral administration of varying doses of mercuric chloride on adrenocortical function in albino rats. The present work was undertaken to study the adrenocortical response to chronic oral administration of mercuric chloride of varying dose and duration in albino rats.

  3. An electrochemical method for accelerated testing of chloride diffusivity in concrete

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, T.; Gjoerv, O.E. (Norwegian Inst. of Tech., Trondheim (Norway). Div. of Building Materials)

    1994-01-01

    In the present paper an electrochemical method for accelerated testing of chloride diffusivity in concrete is presented. The method is based on a theoretical relationship between chloride diffusivity and observed steady-state rate of chloride migration through the concrete. The concentration of the chloride source solution has a significant influence on the rate of chloride migration and, therefore, a correction factor for ionic interaction in the relationship is introduced. It is shown that the relationship can be used for calculation of chloride diffusivity under various testing conditions. Some experimental results are also presented.

  4. The Effect of Silver Chloride Formation on the Kinetics of Silver Dissolution in Chloride Solution

    Science.gov (United States)

    Ha, Hung; Payer, Joe

    2011-01-01

    The precipitation and growth of AgCl on silver in physiological NaCl solution were investigated. AgCl was found to form at bottom of scratches on the surface which may be the less effective sites for diffusion or the favorable sites for heterogeneous nucleation. Patches of silver chloride expanded laterally on the substrate until a continuous film formed. The ionic transport path through this newly formed continuous film was via spaces between AgCl patches. As the film grew, the spaces between AgCl patches closed and ion transport was primarily via micro-channels running through AgCl patches. The decrease of AgCl layer conductivity during film growth were attributed to the clogging of micro-channels or decrease in charge carrier concentration inside the micro-channels. Under thin AgCl layer, i.e. on the order of a micrometer, the dissolution of silver substrate was under mixed activation-Ohmic control. Under thick AgCl layer, i.e. on the order of tens of micrometers, the dissolution of silver substrate was mediated by the Ohmic resistance of AgCl layer. PMID:21516171

  5. The Effect of Silver Chloride Formation on the Kinetics of Silver Dissolution in Chloride Solution.

    Science.gov (United States)

    Ha, Hung; Payer, Joe

    2011-02-28

    The precipitation and growth of AgCl on silver in physiological NaCl solution were investigated. AgCl was found to form at bottom of scratches on the surface which may be the less effective sites for diffusion or the favorable sites for heterogeneous nucleation. Patches of silver chloride expanded laterally on the substrate until a continuous film formed. The ionic transport path through this newly formed continuous film was via spaces between AgCl patches. As the film grew, the spaces between AgCl patches closed and ion transport was primarily via micro-channels running through AgCl patches. The decrease of AgCl layer conductivity during film growth were attributed to the clogging of micro-channels or decrease in charge carrier concentration inside the micro-channels. Under thin AgCl layer, i.e. on the order of a micrometer, the dissolution of silver substrate was under mixed activation-Ohmic control. Under thick AgCl layer, i.e. on the order of tens of micrometers, the dissolution of silver substrate was mediated by the Ohmic resistance of AgCl layer.

  6. Toxic effects of mercuric chloride, methylmercuric chloride, and Emisan 6 (an organic mercurial fungicide) on ovarian recrudescence in the catfish

    Energy Technology Data Exchange (ETDEWEB)

    Kirubagaran, R.; Joy, K.P.

    1988-12-01

    Mercurial toxicity in fishes has been focused mainly on tissue uptake and subcellular distribution, nephrotoxicity, development, hatching and survivability of young ones and teratology. Very few studies have been attempted to investigate Hg toxicity on gonadal activity of fishes throughout the breeding season. In a previous investigation the authors have studied the toxic effects of mercuric chloride (HgCl/sub 2/), methylmercuric chloride (CH/sub 3/HgCl) and emisan 6 (an alkoxyalkyl fungicide) on the survival and histology of the kidney of the catfish, Clarias batrachus. The present report deals with toxic effects of these mercurials on ovarian recrudescence in the catfish, an economically important species in the subcontinent.

  7. [Evaluation of professional exposure to chloride vinyl monomer and vinyl idene chloride for a pharmaceutical packaging worker].

    Science.gov (United States)

    Dorsi, F; De Grandis, D; Laurelli, R; Narda, R; Pietrantonio, E; Scarlini, E; Soldati, P S

    2007-01-01

    The study was conducted by Judicial Policy investigations of Prosecution's Office. The event was connected by a professional founded suspicion disease of a pharmaceutical worker. First information coming from the Authority indicated a chloride vinyl monomer (CVM) exposure. We applied a chemical risk assessment method to estimate real professional exposure. The method was based on the productive cycle, physical and chemical and toxicological properties. The method combined to environmental data permitted to formulate etiological hypothesis. The worker during drugs packaging was exposed to CVM and vinylidene chloride (CVDM) caused by blister warming and by glue deposition. We explain the evaluations by which we could consider the pollutant different distribution in workplaces.

  8. Maintenance Planning for Chloride Initiated Corrosion in Concrete Structures

    DEFF Research Database (Denmark)

    Engelund, S.; Sørensen, John Dalsgaard

    1998-01-01

    Corrosion of the reinforcement in concrete structures can be initiated when the chloride concentration around the reinforcement exceeds a threshold value. In order to prevent the corrosion from reaching a stage where the load-bearing capacity of a given structure suffers a substantial decrease...

  9. Contact dermatitis in workers processing polyvinyl chloride plastics.

    Science.gov (United States)

    Vidović, R; Kansky, A

    1985-01-01

    Out of 401 workers employed in a factory producing shoes from polyvinyl chloride (PVC) granulate, 388 were investigated. By patch testing with the standard tests and 4 phthalate compounds, a diagnosis of allergic contact dermatitis was confirmed in 11 of these. Six of them were sensitized to phthalates and 5 to coal tar.

  10. Reaction of uranium dioxide with copper-containing chloride melts

    International Nuclear Information System (INIS)

    Cermet composition materials consisting of metallic copper and uranium dioxide can be used for manufacturing fuel rods of nuclear power reactors. Reprocessing of such irradiated fuel of dispersive type can be done employing non-aqueous pyrochemical methods and developing such technology requires information on interaction of uranium dioxide with chloride melts containing copper ions

  11. REMOVAL OF CHLORIDE FROM ACIDIC SOLUTIONS USING NO2

    International Nuclear Information System (INIS)

    Chloride (Cl-) salt processing in strong acids is used to recycle plutonium (Pu) from pyrochemical residues. The Savannah River National Laboratory (SRNL) is studying the potential application of nitrogen dioxide (NO2) gas to effectively convert dissolved pyrochemical salt solutions to chloride-free solutions and improve recovery operations. An NO2 sparge has been shown to effectively remove Cl- from solutions containing 6-8 M acid (H+) and up to 5 M Cl-. Chloride removal occurs as a result of the competition of at least two reactions, one which is acid-dependent. Below 4 M H+, NO2 reacts with Cl- to produce nitrosyl chloride (ClNO). Between 6 M and 8 M H+, the reaction of hydrochloric acid (HCl) with nitric acid (HNO3), facilitated by the presence of NO2, strongly affects the rate of Cl- removal. The effect of heating the acidic Cl- salt solution without pre-heating the NO2 gas has minimal effect on Cl- removal rates when the contact times between NO2 and the salt solution are on the order of seconds

  12. Comment on "Local impermeant anions establish the neuronal chloride concentration".

    Science.gov (United States)

    Voipio, Juha; Boron, Walter F; Jones, Stephen W; Hopfer, Ulrich; Payne, John A; Kaila, Kai

    2014-09-01

    Glykys et al. (Reports, 7 February 2014, p. 670) conclude that, rather than ion transporters, "local impermeant anions establish the neuronal chloride concentration" and thereby determine "the magnitude and direction of GABAAR currents at individual synapses." If this were possible, perpetual ion-motion machines could be constructed. The authors' conclusions conflict with basic thermodynamic principles.

  13. 4-(1H-Tetrazol-5-ylpyridinium chloride

    Directory of Open Access Journals (Sweden)

    Yan-Wei Zhang

    2010-12-01

    Full Text Available In the cation of the title compound, C6H6N5+·Cl−, the tetrazole and pyridine rings are nearly coplanar, making a dihedral angle of 5.58 (11°. The organic cations are linked to the chloride anions via N—H...Cl hydrogen bonds, forming chains along [110].

  14. Prenatal Mercuric Chloride Exposure Causes Developmental Deficits in Rat Cortex

    Directory of Open Access Journals (Sweden)

    Tayebeh Rastegar

    2011-09-01

    Full Text Available Introduction: Environmental pollution with heavy metals such as mercury is a major health problem. Growing studies on the field have shown the deleterious effects of mercury on human and nonhuman nervous system, especially in infants, however the effects of prenatal exposure to mercuricchloride on cortical development are not yet well understood. The aim of this study was to investigate the effect of prenatal exposure to mercuric chloride on morphological characteristics of brain cortex. Methods: Mercuric chloride (2 mg/kg or normal saline were injected (I.P. to 36 Sprague – dawley rats in the 8th, 9th or 10th day of gestation. The embryos were surgically removed in the 15th day of gestation, and brain cortices were studied by histological techniques. Results: Histological studies showed that embryos of mercuric chloride treated rats hadcortical neuronal disarrangement withdifferent orientations of nuclei, increased diameter of cortex, increased mitosis of cells, increased cell death, decreased cellular density and increased intracellular space. Conclusion: These findings suggest some micro structural abnormalities in cortical regions after prenatal exposure to mercuric chloride. These structural abnormalities may underliesome neurologic disturbances following mercury intoxication.

  15. Photonic crystal fiber based chloride chemical sensors for corrosion monitoring

    Science.gov (United States)

    Wei, Heming; Tao, Chuanyi; Krishnaswamy, Sridhar

    2016-04-01

    Corrosion of steel is one of the most important durability issues in reinforced concrete (RC) structures because aggressive ions such as chloride ions permeate concrete and corrode steel, consequently accelerating the destruction of structures, especially in marine environments. There are many practical methods for corrosion monitoring in RC structures, mostly focusing on electrochemical-based sensors for monitoring the chloride ion which is thought as one of the most important factors resulting in steel corrosion. In this work, we report a fiber-optic chloride chemical sensor based on long period gratings inscribed in a photonic crystal fiber (PCF) with a chloride sensitive thin film. Numerical simulation is performed to determine the characteristics and resonance spectral response versus the refractive indices of the analyte solution flowing through into the holes in the PCF. The effective refractive index of the cladding mode of the LPGs changes with variations of the analyte solution concentration, resulting in a shift of the resonance wavelength, hence providing the sensor signal. This fiber-optic chemical sensor has a fast response, is easy to prepare and is not susceptible to electromagnetic environment, and can therefore be of use for structural health monitoring of RC structures subjected to such aggressive environments.

  16. A chronopotentiometric approach for measuring chloride ion concentration

    NARCIS (Netherlands)

    Abbas, Yawar; Olthuis, Wouter; Berg, van den Albert

    2013-01-01

    In this paper, a novel approach is reported for the electrochemical measurement of chloride ions in aqueous solution. This sensor is based on the stimulus/response principle of chronopotentiometry. A current pulse is applied at the Ag/AgCl working electrode and the potential change is measured with

  17. Aqueous Chloride Operations Overview: Plutonium and Americium Purification/Recovery

    Energy Technology Data Exchange (ETDEWEB)

    Kimball, David Bryan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Skidmore, Bradley Evan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-06-22

    Acqueous Chloride mission is to recover plutonium and americium from pyrochemical residues (undesirable form for utilization and storage) and generate plutonium oxide and americium oxide. Plutonium oxide is recycled into Pu metal production flowsheet. It is suitable for storage. Americium oxide is a valuable product, sold through the DOE-OS isotope sales program.

  18. 21 CFR 862.1170 - Chloride test system.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Chloride test system. 862.1170 Section 862.1170 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES CLINICAL CHEMISTRY AND CLINICAL TOXICOLOGY DEVICES Clinical Chemistry Test Systems §...

  19. Preparation of pure uranyl chloride from crude yellow cake

    International Nuclear Information System (INIS)

    A process is described for the preparation of pure uranyl chloride solution from crude yellow cake. The process involves dissolution of the latter in hydrochloric acid followed by uranium extraction using TBP-kerosene mixture. A series of experiments were carried out in order to determine the optimum conditions for both the dissolution and the extraction steps

  20. Sulfation of Condensed Potassium Chloride by SO2

    DEFF Research Database (Denmark)

    Sengeløv, Louise With; Hansen, Troels Bruun; Bartolomé, Carmen;

    2013-01-01

    The interaction between alkali chloride and sulfur oxides has important implications for deposition and corrosion in combustion of biomass. In the present study, the sulfation of particulate KCl (90–125 μm) by SO2 was studied in a fixed bed reactor in the temperature range 673–1023 K and with rea...

  1. Study on the Reaction Mechanism of Naphthalene with Oxalyl Chloride

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The reaction of naphthalene with oxalyl chloride in the presence of anhydrous AlCl3 was investigated. The homolog of dinaphthyl methanone can be obtained mainly from this reaction. Naphthalene conversion does not have evident correlation with the amount of AlCl3. The results show that the reaction proceeds via carbon cation electrophilic substitution reaction-free radical substitution reaction pathway.

  2. Formaldoxime hydrogen bonded complexes with ammonia and hydrogen chloride

    Science.gov (United States)

    Golec, Barbara; Mucha, Małgorzata; Sałdyka, Magdalena; Barnes, Austin; Mielke, Zofia

    2015-02-01

    An infrared spectroscopic and MP2/6-311++G(2d,2p) study of hydrogen bonded complexes of formaldoxime with ammonia and hydrogen chloride trapped in solid argon matrices is reported. Both 1:1 and 1:2 complexes between formaldoxime and ammonia, hydrogen chloride have been identified in the CH2NOH/NH3/Ar, CH2NOH/HCl/Ar matrices, respectively, their structures were determined by comparison of the spectra with the results of calculations. In the 1:1 complexes present in the argon matrices the OH group of formaldoxime acts as a proton donor for ammonia and the nitrogen atom acts as a proton acceptor for hydrogen chloride. In the 1:2 complexes ammonia or hydrogen chloride dimers interact both with the OH group and the nitrogen atom of CH2NOH to form seven membered cyclic structures stabilized by three hydrogen bonds. The theoretical spectra generally agree well with the experimental ones, but they seriously underestimate the shift of the OH stretch for the 1:1 CH2NOH⋯NH3 complex.

  3. (tert-Butyl)(2-hydroxyethyl)ammonium chloride

    OpenAIRE

    Cintya Valerio-Cárdenas; Simón Hernández-Ortega; David Morales-Morales

    2014-01-01

    In the cation of the title molecular salt, C6H16NO+·Cl−, the N—C—C—O torsion angle is 176.5 (2)°. In the crystal, the cations and chloride ions are linked by N—H...O and O—H...O hydrogen bonds, generating a two-dimensional network parallel to (100).

  4. Using polyvinyl chloride dyed with bromocresol purple in radiation dosimetry.

    Science.gov (United States)

    Kattan, Munzer; al Kassiri, Haroun; Daher, Yarob

    2011-02-01

    Polyvinyl chloride (PVC) dyed with bromocresol purple was investigated as a high-dose radiation dosimeter. The absorbance at 417 nm depends linearly on the dose below 50 kGy. The response depends neither on dose rate nor on the irradiation temperature. The effects of post-irradiation storage in the dark and in indirect sunlight are also discussed.

  5. A mathematical model for electrochemical chloride removal from marine cast iron artifacts

    Institute of Scientific and Technical Information of China (English)

    Weizhen OUYANG; Xia CAO; Ning WANG

    2009-01-01

    The aim of this article was to theoretically study diffusion and migration of chlo-ride ions during electrochemical chloride removal. The proposed model would enable optimization of its application by predicting the optimal treatment time and current combination. A mathematical model for simulating the transport behavior of chloride ions was developed by consideration of diffusion and migration of chloride ions when a constant DC current density was applied through the marine cast iron artifacts. The corresponding tests were conducted to validate the mathematical model. This model predicted the data of the extraction ratio of the chloride ion that correlated satisfac-torily with the experimental values. An important issue in electrochemical chloride removal was to understand how chloride ions moved, taking account of diffusion and migration of chloride ions and the release of binding chloride ions. The effects of the treatment time, externally applied current density, chloride diffusion coefficient, and rate constant of release of binding chloride ion on chloride removal are studied. The specific quantitative details applied to one-dimensional model were discussed here. This article has proposed a mathematical model for the first time, which was showed to be a useful tool that can reveal the ionic transport mechanism and optimize the application during electrochemical chloride removal.

  6. Chloride channels and the reactions of cells to topography

    Directory of Open Access Journals (Sweden)

    Tobasnick G.

    2001-12-01

    Full Text Available The reactions of rat epitenon cells to substratum topography on the micrometric and nanometric scale such as groove-ridge structures include cell extension, elongation and orientation reactions. In this paper we report that stretch-sensitive chloride channels may be involved in the earliest stages of these reactions in epitenon fibroblast-like cells. We report that rat epitenon-cells can develop appreciable lateral mechanical tension that could stretch both the force generating cells themselves and those nearby. We show that cells in medium in which more than 80% of the chloride has been replaced by nitrate show little reaction to topography. Spreading of the cells takes place but is much reduced along the direction of the groove-ridge topography but enhanced across the topography. The chloride channel inhibitors NPPB (5-Nitro-2- (3phenylpropylamino benzoicacid 4,4'-disothiocyanostilbene-2, 2' sulphonic acid (DIDS and Chlorotoxin produce similar results which are further accentuated when these inhibitors are presented in low chloride medium. An antibody against ClC3, which has close homology to ClC5/6 also, blocked reaction to topography. These treatments have no significant effect on cell spreading on planar surfaces nor do they lead to changes in internal pH in the cells. There is a slight inhibition of rates of cell movement . Experiments using antisense oligoribonucleotides to ClC-5 or ClC-6 channel m-RNA also inhibit topographic reactions, which provides further confirmation of the hypothesis. Since the ClC-3,4 and 5 share considerable sequence similarities in the genes and in their proteins it has not been possible to make an unambigous determination of which precise chloride channel(s is (are involved.

  7. Effects of Organic Corrosion Inhibitor and Chloride Ion Concentration on Steel Depassivation and Repassivation in Solution

    Institute of Scientific and Technical Information of China (English)

    WANG Zixiao; YU Lei; LIU Zhiyong; SONG Ning

    2015-01-01

    Effect of an organic corrosion inhibitor (OCI) named PCI-2014 added in chloride solution on the critical chlo-ride concentration of mild steel depassivation and the critical OCI concentrations for repairing the steel in different chlo-ride solution were investigated. The results show that the critical chloride concentration increases exponentially with raises of PCI-2014 concentration in the solution. Within a certain chloride ion concentration range, the critical PCI-2014 concentration for repairing the corroded steel is also increases exponentially with enhancement of chloride content in the solution. Atomic force microscopy images display the molecular particles of inhibitor are adsorbed on the steel surface and formed a protective layer. Analysis of X-ray photoelectron spectroscopy shows the chloride ions at the surface of steel are displaced by atoms or molecules of the inhibitor in chloride condition.

  8. The Limiting Phenomena at the Anode of the Electrowinning of Zinc from Zinc Chloride in a Molten Chloride Electrolyte

    NARCIS (Netherlands)

    Lans, S.C.

    2004-01-01

    The objective of this research is to investigate the possibilities and technological viability for the electrowinning of zinc from zinc chloride. This research contributes to development of an alternative process, because it provides: ⢠A clear understanding and overview of the present zinc industr

  9. The chloride channel inhibitor NS3736 [corrected] prevents bone resorption in ovariectomized rats without changing bone formation

    DEFF Research Database (Denmark)

    Schaller, Sophie; Henriksen, Kim; Sveigaard, Christina;

    2004-01-01

    Chloride channel activity is essential for osteoclast function. Consequently, inhibition of the osteoclastic chloride channel should prevent bone resorption. Accordingly, we tested a chloride channel inhibitor on bone turnover and found that it inhibits bone resorption without affecting bone form...

  10. Acoustic and mechanical properties of recycled polyvinyl chloride/ground tyre rubber composites

    OpenAIRE

    Colom Fajula, Xavier; Cañavate Ávila, Francisco Javier; Carrillo Navarrete, Fernando; Lis Arias, Manuel José

    2013-01-01

    In order to provide another way of reducing the stock of used tyres and polyvinyl chloride waste, a new material is developed and studied. Formulation includes a matrix constituted by a compound of recycled polyvinyl chloride with plasticized polyvinyl chloride and a reinforcement of ground tyre rubber. Acoustic and mechanical properties of different compositions of polyvinyl chloride/ground tyre rubber were tested in order to determine their suitability for applications fulfilling industry r...

  11. SEPARATION OF MAGNESIUM CHLORIDE FROM SEA WATER BY PREFERENTIAL SALT SEPARATION (PSS)

    OpenAIRE

    Khaled Zohdy, Maha Abdel Kareem and Hussein Abdel-Aal*

    2013-01-01

    Magnesium chloride is typically extracted from sea water on an industrial scale by precipitating it as magnesium hydroxide, then converting it to the chloride by adding hydrochloric acid. This process is known as the Dow process which uses the chemical approach in producing magnesium chloride. Kettani and Abdel-Aal [1], proposed a physical separation procedure known as the Preferential Salt Separation (PSS) to obtain magnesium chloride directly from sea water. In principle, the PSS concept is...

  12. Cytogenetic Effects of Copper Chloride on the Root Tip Cells of Helianthus annuus L.

    OpenAIRE

    İNCEER, Hüseyin; AYAZ, Sema; BEYAZOĞLU, Osman; ŞENTÜRK, Emine

    2003-01-01

    The cytogenetic effects of copper chloride on root tip cells of Helianthus annuus were investigated. Seeds were treated with 10, 25, 50 and 100 mg/L (ppm) of copper chloride for 24 h. It was found that copper chloride has a marked mitodepressive action on mitosis. Mitotic abnormalities were increased and the mitotic index was decreased depending on the concentration of the copper chloride applied.

  13. Electrical characterization of Calcium Aluminate (CA) in presence of chloride ions

    OpenAIRE

    Torres-Luque, Marcela; Osma, Johann F.; Sánchez-Silva, Mauricio; BASTIDAS-ARTEAGA, Emilio; Schoefs, Franck

    2015-01-01

    International audience Chloride ingress is one of the major causes of reinforced concrete degradation. Chlorides accelerate the breaking of the protective layer of rebars favoring pitting corrosion; furthermore, corrosion products generate cracks in concrete, which further accelerate chloride ingress, increase porosity and reduce the strength. From a chemical perspective, the presence of chlorides and its diffusion into the reinforced concrete matrix is highly influenced by the content and...

  14. The Influence of Mineral Functional Materials on Chloride Ion Penetration of Concrete

    Institute of Scientific and Technical Information of China (English)

    HU Hongmei; MA Baoguo

    2005-01-01

    The mechanism of chloride ion penetration in high performance concrete was analyzed. The experimental results indicate that there are two important reasons that influence the anti-chloride penetration of high performance concrete. One is the function effect of mineral functional material, so that it increases concrete's capability to resist chloride ion penetration. The other is combined action of mineral functional material's original capability of binding the chloride ion (physical adsorption) and physicochemical adsorption after hydration.

  15. ENHANCEMENT OF CHLORIDE RESISTANCE OF PRE-STRESSED CONCRETE SHEET PILE BY BLAST FURNACE SLAG

    OpenAIRE

    Irmawaty, Rita

    2012-01-01

    Chloride-induced corrosion is one of the main mechanisms of deterioration affecting the long-term performance of concrete structures. In Japan, a large majority of structures are built either near the costal or indirect contact with seawater. The durability of reinforced or pre-stressed concrete structure depends on the resistance of concrete to chloride penetration. Naturally concrete provides physical and chemical protection to the reinforcing steel from chloride penetrating. The chloride ...

  16. Expression and cellular localisation of chloride intracellular channel 3 in human placenta and fetal membranes

    NARCIS (Netherlands)

    Money, T. T.; King, R. G.; Wong, M.H.; Stevenson, J. L.; Kalionis, B.; Erwich, J. J. H. M.; Huisman, Marcel; Timmer, A.; Hiden, U.; Desoye, G.; Gude, N. M.

    2007-01-01

    Chloride channels regulate the movement of a major cellular anion and are involved in fundamental processes that are critical for cell viability. Regulation of intracellular chloride is achieved by multiple classes of channel proteins. One class of putative channels are the chloride intracellular ch

  17. 75 FR 36629 - Barium Chloride From the People's Republic of China: Continuation of Antidumping Duty Order

    Science.gov (United States)

    2010-06-28

    ... International Trade Administration Barium Chloride From the People's Republic of China: Continuation of... China: Final Results of Expedited Third Sunset Review of Antidumping Duty Order, 74 FR 55814 (October 29... Barium Chloride From China, 75 FR 33824 (June 15, 2010), and Barium Chloride from China (Inv. No....

  18. 46 CFR 154.1750 - Butadiene or vinyl chloride: Refrigeration system.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Butadiene or vinyl chloride: Refrigeration system. 154... and Operating Requirements § 154.1750 Butadiene or vinyl chloride: Refrigeration system. A refrigeration system for butadiene or vinyl chloride must not use vapor compression unless it: (a) Avoids...

  19. [Activity of Ca(2+)-dependent neutral proteinases in rat organs under cobalt and mercury chloride injection].

    Science.gov (United States)

    Kaliman, P A; Samokhin, A A; Samokhina, L M

    2003-01-01

    The activity of Ca(2+)-dependent neutral proteinases in rats under cobalt and mercury chloride injection was investigated. The calpains activity increase in the lungs, heart, liver and kidneys was revealed after 2 h cobalt chloride action. The mercury chloride gives a reliable increase of calcium-dependent neutral proteinases only in the kidneys. PMID:14574747

  20. 77 FR 22847 - National Emission Standards for Hazardous Air Pollutants for Polyvinyl Chloride and Copolymers...

    Science.gov (United States)

    2012-04-17

    ... Hazardous Air Pollutants for Polyvinyl Chloride and Copolymers Production; Final Rule #0;#0;Federal Register... Polyvinyl Chloride and Copolymers Production AGENCY: Environmental Protection Agency (EPA). ACTION: Final... Polyvinyl Chloride and Copolymers Production. The final rules establish emission standards that apply at...

  1. 76 FR 30604 - National Emission Standards for Hazardous Air Pollutants for Polyvinyl Chloride and Copolymers...

    Science.gov (United States)

    2011-05-26

    ... Polyvinyl Chloride and Copolymers Production AGENCY: Environmental Protection Agency (EPA). ACTION: Proposed..., the proposed rule, National Emission Standards for Hazardous Air Pollutants for Polyvinyl Chloride and... Polyvinyl Chloride and Copolymers Production, under Docket ID No. EPA-HQ-OAR-2002-0037 (available at...

  2. 76 FR 42613 - National Emission Standards for Hazardous Air Pollutants for Polyvinyl Chloride and Copolymers...

    Science.gov (United States)

    2011-07-19

    ... Polyvinyl Chloride and Copolymers Production; Extension of Comment Period AGENCY: Environmental Protection... for Hazardous Air Pollutants for Polyvinyl Chloride and Copolymers Production is being extended for 14... extend the public comment period for the May 20, 2011, Proposed Polyvinyl Chloride and...

  3. 76 FR 29527 - National Emission Standards for Hazardous Air Pollutants for Polyvinyl Chloride and Copolymers...

    Science.gov (United States)

    2011-05-20

    ... Hazardous Air Pollutants for Polyvinyl Chloride and Copolymers Production; Proposed Rule #0;#0;Federal.... SUMMARY: EPA is proposing National Emission Standards for Hazardous Air Pollutants for Polyvinyl Chloride... pollutants from polyvinyl chloride and copolymers production located at major and area sources. The...

  4. Enthalpic interactions of N-glycylglycine with xylitol in aqueous sodium chloride and potassium chloride solutions at T = 298.15 K

    International Nuclear Information System (INIS)

    The mixing enthalpies of N-glycylglycine with xylitol and their respective enthalpies of dilution in aqueous sodium chloride and potassium chloride solutions have been determined by using flow-mix isothermal microcalorimetry at the temperature of 298.15 K. These experimental results have been used to determine the heterotactic enthalpic interaction coefficients (hxy, hxxy, and hxyy) according to the McMillan-Mayer theory. It has been found that the heterotactic enthalpic pairwise interaction coefficients hxy between N-glycylglycine and xylitol in aqueous sodium chloride and potassium chloride solutions are negative and become less negative with an increase in the molality of sodium chloride or potassium chloride. The results are discussed in terms of solute-solute and solute-solvent interactions.

  5. Enthalpic interactions of N-glycylglycine with xylitol in aqueous sodium chloride and potassium chloride solutions at T = 298.15 K

    Energy Technology Data Exchange (ETDEWEB)

    Liu Min, E-mail: panpanliumin@163.co [College of Chemistry and Chemical Engineering, Liao Cheng University, Liaocheng, Shandong 252059 (China); Wang Lili [College of Chemistry and Chemical Engineering, Liao Cheng University, Liaocheng, Shandong 252059 (China); Zhu Lanying [College of Life Science and Bioengineering, Liao Cheng University, Liaocheng, Shandong 252059 (China); Li Hui; Sun Dezhi; Di Youying; Li Linwei [College of Chemistry and Chemical Engineering, Liao Cheng University, Liaocheng, Shandong 252059 (China)

    2010-07-15

    The mixing enthalpies of N-glycylglycine with xylitol and their respective enthalpies of dilution in aqueous sodium chloride and potassium chloride solutions have been determined by using flow-mix isothermal microcalorimetry at the temperature of 298.15 K. These experimental results have been used to determine the heterotactic enthalpic interaction coefficients (h{sub xy}, h{sub xxy}, and h{sub xyy}) according to the McMillan-Mayer theory. It has been found that the heterotactic enthalpic pairwise interaction coefficients h{sub xy} between N-glycylglycine and xylitol in aqueous sodium chloride and potassium chloride solutions are negative and become less negative with an increase in the molality of sodium chloride or potassium chloride. The results are discussed in terms of solute-solute and solute-solvent interactions.

  6. [Evaluating risk of health disorders in workers engaged into polyvinyl chloride, vinyl chloride and caustic soda production (according to data collected by polls)].

    Science.gov (United States)

    D'iakovich, O A

    2014-01-01

    The authors represent data of automated system for quantitative risk evaluation of main pathologic syndromes in workers engaged into polyvinyl chloride, vinyl chloride and caustic soda production. Vinyl chloride and mercury levels at the investigation time corresponded with MAC. Relationship was seen between value of arterial hypertension risk and duration of contact with both vinyl chloride and mercury. Risk values for functional disorders of liver, endocrine system and nervous system were in weak correlation with length of exposure to mercury at work. Workers exposed to mercury appeared to have lower self-estimation of health state and higher dissatisfaction with the work.

  7. INTERACTION OF POLYVINYLPYRROLIDONE WITH METAL CHLORIDE AQUEOUS SOLUTIONS

    Institute of Scientific and Technical Information of China (English)

    Mohammad Saleem Khan; Khaista Gul; Najeeb Ur Rehman

    2004-01-01

    Interactions of polyvinylpyrrolidone (PVP) with metal chlorides (MgCl2, CaCl2, KC1 and BaC12) have been investigated by viscometric and spectrophotometric techniques in aqueous solutions. Intrinsic viscosity [η] of (PVP) has shown a discontinuity with varying concentration of metal chlorides. The decreasing order of effectiveness of cation is K1+>Ca2+> Mg2+> Ba2+ for poly(vinylpyrrolidone) solution. Changes in the absorption spectra of the cosolutes were observed in the presence of PVP in the lower limit of the UV-visible region i.e. 200-210 nm. These changes were attributed to interaction of PVP molecules with the cosolute molecules. As the concentration of the cosolute increased, a red shift in the peaks was observed, indicating an increase in interaction between PVP and cosolutes.

  8. Uranium (III) precipitation in molten chloride by wet argon sparging

    Science.gov (United States)

    Vigier, Jean-François; Laplace, Annabelle; Renard, Catherine; Miguirditchian, Manuel; Abraham, Francis

    2016-06-01

    In the context of pyrochemical processes for nuclear fuel treatment, the precipitation of uranium (III) in molten salt LiCl-CaCl2 (30-70 mol%) at 705 °C is studied. First, this molten chloride is characterized with the determination of the water dissociation constant. With a value of 10-4.0, the salt has oxoacid properties. Then, the uranium (III) precipitation using wet argon sparging is studied. The salt is prepared using UCl3 precursor. At the end of the precipitation, the salt is totally free of solubilized uranium. The main part is converted into UO2 powder but some uranium is lost during the process due to the volatility of uranium chloride. The main impurity of the resulting powder is calcium. The consequences of oxidative and reductive conditions on precipitation are studied. Finally, coprecipitation of uranium (III) and neodymium (III) is studied, showing a higher sensitivity of uranium (III) than neodymium (III) to precipitation.

  9. Electrowinning of lead powder from chloride leach liquor

    Energy Technology Data Exchange (ETDEWEB)

    Owais, Ashour [Suez Canal Univ., Suez (Egypt). Metallurgical and Materials Engineering Dept.

    2012-11-15

    Electrowinning of lead powder from chloride leach liquor obtained from secondary lead slag leached in hydrochloric acid is the main aim of this work. The resulted lead chloride solution (leachate) containing 2.2 wt.-% Pb and 1.24 wt.-% HCl was electrowon in an electrolytic cell containing one graphite plate as inert anode and two lead sheets as starting permanent cathodes. Different electrolysis parameters such as current density, electrolyte temperature and electrolyte stirring rate were studied. As indicated by SEM, EDX and XRD analyses, fine and pure (100 % Pb) powders with a dispersed and needle-like shape were formed with cathodic current efficiency up to 67.9 % and electrical energy demand ranges from 0.809 to 4.998 kWh/kg Pb with productivity up to 2.63 g/Ah. (orig.)

  10. Prediction of chloride ingress and binding in cement paste

    DEFF Research Database (Denmark)

    Geiker, Mette Rica; Nielsen, Erik Pram; Herforth, Duncan

    2007-01-01

    Finite Difference Model for the ingress of chlorides into concrete which takes into account its multi-component nature. The “composite theory” was then used to predict the diffusivity of each ion based on the phase assemblage present in the hydrated Portland cement paste. Agreement was found between...... in Portland cement pastes at any content of chloride, alkalis, sulfates and carbonate was verified experimentally and found to be equally valid when applied to other data in the literature. The thermodynamic model for predicting the phase equilibria in hydrated Portland cement was introduced into an existing...... profiles for the Cl/Ca ratio predicted by the model and those determined experimentally on 0.45 water/powder ratio Portland cement pastes exposed to 650 mM NaCl for 70 days. This confirms the assumption of essentially instantaneous binding where quasi-equilibrium is established locally. This does not imply...

  11. Sodium chloride's effect on self-assembly of diphenylalanine bilayer.

    Science.gov (United States)

    Kwon, Junpyo; Lee, Myeongsang; Na, Sungsoo

    2016-07-15

    Understanding self-assembling peptides becomes essential in nanotechnology, thereby providing a bottom-up method for fabrication of nanostructures. Diphenylalanine constitutes an outstanding building block that can be assembled into various nanostructures, including two-dimensional bilayers or nanotubes, exhibiting superb mechanical properties. It is known that the effect of the ions is critical in conformational and chemical interactions of bilayers or membranes. In this study, we analyzed the effect of sodium chloride on diphenylalanine bilayer using coarse-grained molecular dynamics simulations, and calculated the bending Young's modulus and the torsional modulus by applying normal modal analysis using an elastic network model. The results showed that sodium chloride dramatically increases the assembling efficiency and stability, thereby promising to allow the precise design and control of the fabrication process and properties of bio-inspired materials. © 2016 Wiley Periodicals, Inc. PMID:27241039

  12. Electrochemical synthesis and characterization of chloride doped polyaniline

    Indian Academy of Sciences (India)

    A M Pharhad Hussain; A Kumar

    2003-04-01

    Chloride doped polyaniline conducting polymer films have been prepared in a protic acid medium (HCl) by potentiodynamic method in an electrochemical cell and studied by cyclic voltammetry and FTIR techniques. The FTIR spectra confirmed Cl– ion doping in the polymers. The polymerization rate was found to increase with increasing concentration of aniline monomer. But the films obtained at high monomer concentration were rough having a nonuniform flaky polyaniline distribution. Results showed that the polymerization rate did not increase beyond a critical HCl concentration. Cyclic voltammetry suggested that, the oxidation-reduction current increased with an increase in scan rate and that the undoped polyaniline films were not hygroscopic whereas chloride doped polyaniline films were found to be highly hygroscopic.

  13. Swell activated chloride channel function in human neutrophils

    Energy Technology Data Exchange (ETDEWEB)

    Salmon, Michael D. [Leukocyte and Ion Channel Research Laboratory, School of Health and Biosciences, University of East London, Stratford Campus, London E15 4LZ (United Kingdom); Ahluwalia, Jatinder, E-mail: j.ahluwalia@uel.ac.uk [Leukocyte and Ion Channel Research Laboratory, School of Health and Biosciences, University of East London, Stratford Campus, London E15 4LZ (United Kingdom)

    2009-04-17

    Non-excitable cells such as neutrophil granulocytes are the archetypal inflammatory immune cell involved in critical functions of the innate immune system. The electron current generated (I{sub e}) by the neutrophil NADPH oxidase is electrogenic and rapidly depolarises the membrane potential. For continuous function of the NADPH oxidase, I{sub e} has to be balanced to preserve electroneutrality, if not; sufficient depolarisation would prevent electrons from leaving the cell and neutrophil function would be abrogated. Subsequently, the depolarisation generated by the neutrophil NADPH oxidase I{sub e} must be counteracted by ion transport. The finding that depolarisation required counter-ions to compensate electron transport was followed by the observation that chloride channels activated by swell can counteract the NADPH oxidase membrane depolarisation. In this mini review, we discuss the research findings that revealed the essential role of swell activated chloride channels in human neutrophil function.

  14. CPP-603 Chloride Removal System Decontamination and Decommissioning

    International Nuclear Information System (INIS)

    The CPP-603 (annex) Chloride Removal System (CRS) Decontamination and Decommissioning (D ampersand D) Project is described in this report. The CRS was used for removing Chloride ions and other contaminants that were suspended in the waters of the underwater fuel storage basins in the CPP-603 Fuel Receiving and Storage Facility (FRSF) from 1975 to 1981. The Environmental Checklist and related documents, facility characterization, decision analysis', and D ampersand D plans' were prepared in 1991. Physical D ampersand D activities were begun in mid summer of 1992 and were completed by the end of November 1992. All process equipment and electrical equipment were removed from the annex following accepted asbestos and radiological contamination removal practices. The D ampersand D activities were performed in a manner such that no radiological health or safety hazard to the public or to personnel at the Idaho National Engineering Laboratory (INEL) occurred

  15. Probabilistic Models and Computational Methods for Chloride Ingress in Concrete

    DEFF Research Database (Denmark)

    Engelund, S.

    Within the last decades it has been recognized that reinforced concrete structures are subject to a number of destructive mechanisms which might affect the structure in such a way that it is not able to fulfil its purpose efficiently. The present report focuses on chloride ingress and chloride......-initiated corrosion of the reinforcement, because experience has shown that in Denmark this is one of the most common destructive mechanisms. In order to ensure that a given reinforced concrete structure is able to fulfil its purpose extensive measurements are performed and on the basis of these measurements...... are costly, and careful planning is mandatory. The planning can be performed on the basis of classical decision theory (see e.g. Raiffa and Schlaifer). However, in order to use decision theory, it is necessary to formulate a probabilistic model of the considered problem....

  16. Thionyl-chloride-induced lung injury and bronchiolitis obliterans

    Energy Technology Data Exchange (ETDEWEB)

    Konichezky, S.; Schattner, A.; Ezri, T.; Bokenboim, P.; Geva, D. (Kaplan Hospital, Rehovot (Israel))

    1993-09-01

    Thionyl-chloride (TCl) is used in the manufacture of lithium batteries, producing SO2 and HCl fumes on contact with water. We report two cases of accidental TCl exposure resulting in lung injury that may vary from a relatively mild and reversible interstitial lung disease to a severe form of bronchiolitis obliterans causing, after a latent period, an acute/chronic respiratory failure as well as other complications (spontaneous pneumothorax and bronchopleural fistula), previously unreported in TCl fume inhalation.

  17. Discoloration of Synthetic Dyeing Wastewater Using Polyaluminium Chloride

    OpenAIRE

    Bogoeva-Gaceva, Gordana; BUŽAROVSKA, Aleksandra; DIMZOSKI, Bojan

    2010-01-01

    The efficiency of polyaluminium chloride (PAC) in discoloration of synthetic dyeing wastewater composed of reactive or direct dye has been investigated, taking into account the proven advantages of PAC in water purification processes (compared to the conventional coagulants such as Al2(SO4)3, FeSO4, etc.). The efficiency of PAC was determined by UV/VIS spectroscopy, controlling the UV/VIS absorbance changes of the wastewater samples after their treatment with the appropriate amount of PAC. Co...

  18. Chloride transport through cementitious membranes using pulsed current

    OpenAIRE

    Diaz, B.; Novoa, X.Ramon; Puga, Beatriz; Vivier, Vincent

    2013-01-01

    International audience Microstructural changes and chloride transport in cement pastes are studied under DC current and pulsed electric fields. Impedance spectroscopy and ultrasonic pulse velocity measurements have been employed for quasi-real time monitoring of changes in the cement paste microstructure. The results show that the electric resistivity and ultrasound velocity (measured at 500 kHz) are modified during the migration experiments. At the end of test, mercury intrusion porosimet...

  19. Hibiscus sabdariffa Affects Ammonium Chloride-Induced Hyperammonemic Rats

    OpenAIRE

    Subramanian, P.; M. Mohamed Essa

    2007-01-01

    Hibiscus sabdariffa (HS) is an edible medicinal plant, indigenous to India, China and Thailand and is used in Ayurveda and traditional medicine. Alcoholic extract of HS leaves (HSEt) was studied for its anti-hyperammonemic and antioxidant effects in brain tissues of ammonium chloride-induced hyperammonemic rats. Oral administration of HSEt (250 mg kg−1 body weight) significantly normalizes the levels of ammonia, urea, uric acid, creatinine and non-protein nitrogen in the blood. HSEt significa...

  20. Influence of sodium chloride on wine yeast fermentation performance

    OpenAIRE

    Logothetis, Stelios

    2010-01-01

    Stilianos Logothetis1, Elias T Nerantzis2, Anna Gioulioti3, Tasos Kanelis2, Tataridis Panagiotis2, Graeme Walker11University of Abertay Dundee, School of Contemporary Sciences, Dundee, Scotland; 2TEI of Athens Department of Oenology and Spirit Technology, Biotechnology and Industrial Fermentations Lab Agiou Spiridonos, Athens, Greece; 3Ampeloiniki SA Industrial Park Thermi, Thessaloniki, GreeceAbstract: This paper concerns research into the influence of salt (sodium chloride) on growth, viabi...

  1. Synthesis and thermal behavior of polyacrylonitrile/vinylidene chloride copolymer

    OpenAIRE

    Robson Fleming; Luiz Claudio Pardini; Nilton Alves; Elson Garcia; Carlos Brito Júnior

    2014-01-01

    Polyacrylonitrile fiber encompasses a broad range of products based on acrylonitrile (AN) which is readily copolymerized with a wide range of ethylenic unsaturated monomers giving rise to polymers with different characteristics and applications. Such products can be designed for cost-effective, flame and heat resistant solutions for the textile industry, aircraft and automotive markets. In the present work acrylonitrile was copolymerized with vinylidene chloride (VDC) by conventional suspensi...

  2. Intergranular Corrosion of 2024 Alloy in Chloride Solutions

    OpenAIRE

    Augustin, Christel; Andrieu, Eric; Blanc, Christine; Mankowski, Georges; Delfosse, Jérôme

    2007-01-01

    Experiments were performed to determine the propagation kinetics of intergranular corrosion on 2024 aluminum alloy immersed in 1 and 3 M chloride solutions. Tests consisting of immersion in a corrosive solution followed by optical observations on sectioned samples were carried out. This method was found to be time consuming and led to a lack of reproducibility due to the random nature of the corrosion attacks. Another method proved to be more efficient; it consisted of measuring the load to f...

  3. A spontaneous, tonic chloride conductance in solitary glutamatergic hippocampal neurons

    OpenAIRE

    Eisenman, Lawrence N.; Kress, Geraldine; Charles F. Zorumski; Mennerick, Steven

    2006-01-01

    GABA-A receptors mediate both phasic synaptic inhibition and more recently appreciated tonic currents in the vertebrate central nervous system. We addressed discrepancies in the literature regarding the pharmacology of tonic currents by examining tonic currents in a controlled environment of dissociated, solitary glutamatergic neurons. We describe a novel tonically active, bicuculline-sensitive chloride conductance that is insensitive to gabazine and to picrotoxin and thus not mediated by con...

  4. Dynamic viscoelastic properties of polyvinyl chloride with physical aging

    Science.gov (United States)

    Tian, Fang; Luo, Yingshe; Yin, Shuiping; Wang, Hong; Cao, Chun

    2015-11-01

    The experimental research of dynamic viscoelastic properties of polyvinyl chloride was conducted by the dynamic mechanical analysis method in this paper. And the fitting equation of dynamic modulus of polymers has been presented. Based on the time-aging time equivalent principle, horizontal shift factor and vertical shift factor of aging time are carried out, which proposes a novel method for the research on time-aging time equivalent analysis of dynamic mechanical properties of polymers during physical aging.

  5. Comment on "Local impermeant anions establish the neuronal chloride concentration".

    Science.gov (United States)

    Luhmann, Heiko J; Kirischuk, Sergei; Kilb, Werner

    2014-09-01

    Glykys et al. (Reports, 7 February 2014, p. 670) proposed that cytoplasmic impermeant anions and polyanionic extracellular matrix glycoproteins establish the local neuronal intracellular chloride concentration, [Cl(-)]i, and thereby the polarity of γ-aminobutyric acid type A (GABAA) receptor signaling. The experimental procedures and results in this study are insufficient to support these conclusions. Contradictory results previously published by these authors and other laboratories are not referred to.

  6. Preparation of polymeric aluminium ferric chloride from bauxite tailings

    OpenAIRE

    Ma D; Guo M; Zhang M

    2013-01-01

    Bauxite tailings are the main solid wastes in the ore dressing process. The Al2O3 and Fe2O3 contents in bauxite tailings can reach 50% and 13% respectively. The present study proposed a feasible method to use bauxite tailings to prepare polymeric aluminium ferric chloride (PAFC), a new composite inorganic polymer for water purification. Bauxite tailings roasted reacting with hydrochloric acid under air, pickle liquor which mainly contains Fe3+, Al3+ was generated, then calcium aluminate...

  7. An insight into the passivation of cupronickel alloys in chloride environment

    Indian Academy of Sciences (India)

    J Mathiyarasu; N Palaniswamy; V S Muralidharan

    2001-02-01

    Cupronickels offer enhanced corrosion protection in marine environments by the formation of passive films on the surface. Cyclic voltammetric studies were carried on cupronickels in chloride solutions at H 6.3 to understand the role of chloride ions in passive film formation. Increase in nickel content of the alloy and of chloride ions in solution decreases film resistance. Chloride ions take part in reduction of the passive film to copper. A solid-state model for passive film formation involving chloride ions has been attempted.

  8. Properties of a conductive cellular chloride pathway in the skin of the toad (Bufo bufo)

    DEFF Research Database (Denmark)

    Larsen, Erik Hviid; Kristensen, P

    1978-01-01

    of the steady-state conductance and the steady-state chloride current reveal that the chloride pathway has maximum conductance for V approximately -80 mV (outside of the skin being negative) and approaches a non-conducting safe for V greater than 0 mV. This strong outward going rectification is a steady......-compartment model indicate that the strong steady-state chloride current rectification cannot be obtained if only the intracellular chloride concentration and the membrane potentials are allowed to vary ("Goldman-rectification"). It is suggested, therefore, that the premeability of the chloride pathway varies...

  9. Relationship between chloride diffusivity and pore structure of hardened cement paste

    Institute of Scientific and Technical Information of China (English)

    Guo-wen SUN; Wei SUN; Yun-sheng ZHANG; Zhi-yong LIU

    2011-01-01

    Based on effective media theory, a predictive model, relating chloride diffusivity to the capillary pores, gel pores,tortuosity factor, and pore size distribution of hardened cement, is proposed. To verify the proposed model, the diffusion coefficient of chloride ions, the degree of hydration, and peak radius of capillary pores of cement paste specimens were measured. The predicted results for chloride diffusivity were compared with published data. The results showed that the predicted chloride diffusivity of hardened cement paste was in good agreement with the experimental results. The effect of the evolution of pore structures in cement paste on chloride diffusivity could be deduced simultaneously using the proposed model.

  10. Enthalpy and entropy interaction parameters of sodium chloride with some monosaccharides in water

    Institute of Scientific and Technical Information of China (English)

    ZHUO; Kelei; WANG; Jianji; BAI; Guangyue; YAN; Haike; WANG

    2004-01-01

    Dilution enthalpies of sodium chloride and some monosaccharides (glucose, galactose, xylose, arabinose, and fructose) in water and mixing enthalpies of aqueous sodium chloride and these monosaccharide solutions were measured by using an improved precision semimicro-titration calorimeter. Transfer enthalpies of sodium chloride from water to aqueous saccharide solutions were evaluated as well as enthalpy interaction parameters of sodium chloride with these monosaccharides in water. Combined with Gibbs energy interaction parameters, entropy interaction parameters were also obtained. The results show that interactions of the saccharides with sodium chloride depend on the stereochemistry of saccharide molecules. These interaction parameters can identify stereochemical structure of saccharide molecules.

  11. The effects of surface treatments on rapid chloride permeability tests

    KAUST Repository

    Yoon, Seyoon

    2012-08-01

    Surface treatments are commonly applied to improve the chloride resistance of concrete structures exposed to saline environments. Information on chloride ingress to surface-treated concrete is mostly provided by application of the rapid chloride permeability test (RCPT); this test is short in duration and provides rapid results. This study presents a numerical formulation, based on the extended Nernst-Plank/Poisson (NPP) equation, to model the effect of the surface treatment on a sample tested by RCPT. Predictions of the model are compared to experimental measurements. The simulations show that the results from RCPT, in terms of ionic profiles and measurement of the electric field, are dependent on the effectiveness of surface treatments. During RCPT, highly effective surface treatments cause both cations and anions to flocculate at the interface between the surface treatment and the concrete, creating a local electric field. Our numerical model includes these phenomena and presents a methodology to obtain more accurate diffusivities of the surface-treated- concrete from RCPT. © 2012 Elsevier B.V. All rights reserved.

  12. PCDD/F catalysis by metal chlorides and oxides.

    Science.gov (United States)

    Zhang, Mengmei; Yang, Jie; Buekens, Alfons; Olie, Kees; Li, Xiaodong

    2016-09-01

    Model fly ash (MFA) samples were composed of silica, sodium chloride, and activated carbon, and doped with metal (0.1 wt% Cu, Cr, Ni, Zn and Cd) chloride or oxide. Each sample was de novo tested at 350 °C for 1 h, in a flow of gas (N2, N2 + 10% O2, +21% O2 or +10% H2) to investigate the effect of metal catalyst and gas composition on PCDD/F formation. Total PCDD/F yield rises rapidly with oxygen content, while the addition of hydrogen inhibits the formation and chlorination of PCDD/F. The amount of PCDD on average rises linearly with the oxygen concentration, while that of PCDF follows a reaction order of about 1/2; thus the PCDF to PCDD ratio drops when more oxygen becomes available. Some samples do not follow this trend. Chlorides are much more active than oxides, yet there are marked differences between individual metals. Principal component analysis (PCA) was applied to study the signatures from all samples, showing their unique specificity and diversity. Each catalyst shows a different signature within its individual homologue groups, demonstrating that these signatures are not thermodynamically controlled. Average congener patterns do not vary considerably with oxygen content changing from oxidising (air) to reducing (nitrogen, hydrogen). PMID:27341157

  13. Investigation of lithium-thionyl chloride battery safety hazards

    Science.gov (United States)

    Attia, A. I.; Gabriel, K. A.; Burns, R. P.

    1983-01-01

    In the ten years since the feasibility of a lithium-thionyl chloride cell was first recognized (1) remarkable progress has been made in hardware development. Cells as large as 16,000 Ah (2) and batteries of 10.8 MWh (3) have been demonstrated. In a low rate configuration, energy densities of 500 to 600 Wh/kg are easily achieved. Even in the absence of reported explosions, safety would be a concern for such a dense energetic package; the energy density of a lithium-thionyl chloride cell is approaching that of dynamite (924 Wh/kg). In fact explosions have occurred. In general the hazards associated with lithium-thionyl chloride batteries may be divided into four categories: Explosions as a result of an error in battery design. Very large cells were in prototype development prior to a full appreciation of the hazards of the system. It is possible that some of the remaining safety issues are related to cell design; Explosions as a result of external physical abuse such as cell incineration and puncture; Explosions due to short circuiting which could lead to thermal runaway reactions. These problems appear to have been solved by changes in the battery design (4); and Explosions due to abnormal electrical operation (i.e., charging (5) and overdischarging (6) and in partially or fully discharged cells on storage (7 and 8).

  14. Viscosity measurement of alkali chlorides with capillary viscometer

    International Nuclear Information System (INIS)

    Viscosities of molten alkali chlorides have been measured by means of newly designed capillary viscometer made of fused quartz as shown in Fig. 1 and combined with a special transparent electric furnace which can be inverted. The viscometer was of a suspended level type and designed so as to minimize the error associated with the measurement, e.g., the effect of surface tension. Reynolds number of the capillary was less than 100. The sample was introduced into the viscometer through the quartz filter and then sealed under vacuum. Cell constants of the viscometer were determined by using distilled water as a calibration liquid. Efflux times were measured by direct visual observation using a digital stopwatch, and showed excellent reproducibility. The viscometer in the present investigation proved to be very precise and the errors accompanied were considered to be less than 0.7%. Viscosities obtained are collected in Table 1 and Figs. 3-1 -- 3-5 together with the previous data. Whereas the viscosity did not necessarily show any regularity, the activation energy for viscous flow increased with increasing cation size in the series of molten alkali chlorides. On the basis of a hard sphere model, the sizes of the flow units were considered to be nearly equal to those of cation-anion pairs. The viscosity of each molten alkali chloride at melting temperature increased with an increasing ratio of the flow unit volume to the hole volume. (author)

  15. Crevice Corrosion of 321 Stainless Steel in Sodium Chloride Solutions

    International Nuclear Information System (INIS)

    Electrochemical techniques have been applied to study the crevice corrosion behaviour of stabilized 321 stainless steel in both 0.5, 1 and 2 M sodium chloride solutions at 25 and 80 degree . This type of stainless steel enjoys a good corrosion resistance especially in the heat affected zone (Haz) of welds. In this investigation the crevice corrosion of 321 stainless steel was studied in both bulk solution environments as well as in chloride solutions simulating those formed inside crevices. A metal-to-nonmetal crevice assembly, in which disc type specimens were faced to a PTFE crevice former, is used for bulk solution tests. Crevice-free specimens of solutions formed inside crevices (known as the critical crevice solutions, CCS). Cyclic potentiodynamic technique was used in evaluating the electrochemical corrosion performance of the alloy in bulk (0.5 and 1 M Nacl) environment. This revealed that both chloride ion concentration and temperature have a marked effect on the electrochemical parameters generally used for the evaluation of the crevice corrosion susceptibility. This included the corrosion potential. E corr. The passivity breakdown potential, Eb, and the protection potential, E p

  16. ClC-3 chloride channel in hippocampal neuronal apoptosis

    Institute of Scientific and Technical Information of China (English)

    Lijuan Xu; Shuling Zhang; Hongling Fan; Zhichao Zhong; Xi Li; Xiaoxiao Jin; Quanzhong Chang

    2013-01-01

    Over-production of nitric oxide is pathogenic for neuronal apoptosis around the ischemic area fol-lowing ischemic brain injury. In this study, an apoptotic model in rat hippocampal neurons was tablished by 0.5 mmol/L 3-morpholinosyndnomine (SIN-1), a nitric oxide donor. The models were then cultured with 0.1 mmol/L of 4,4’-di sothiocyanostilbene-2,2’-disulfonic acid (DIDS;the chloride channel blocker) for 18 hours. Neuronal survival was detected using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, and apoptosis was assayed by Hoechst 33342-labeled neuronal DNA fluorescence staining. Western blot analysis and immunoche-nescence staining were applied to determine the changes of activated caspase-3 and CIC-3 channel proteins. Real-time PCR was used to detect the mRNA expression of CIC-3. The results showed that SIN-1 reduced the neuronal survival rate, induced neuronal apoptosis, and promoted ClC-3 chloride channel protein and mRNA expression in the apoptotic neurons. DIDS reversed the effect of SIN-1. Our findings indicate that the increased activities of the ClC-3 chloride channel may be involved in hippocampal neuronal apoptosis induced by nitric oxide.

  17. Continuous microcellular foaming of polyvinyl chloride and compatibilization of polyvinyl chloride and polylactide composites

    Science.gov (United States)

    Shah, Bhavesh

    This dissertation focuses on overcoming existing limitations of WPCs which prevent them from realizing their full market potential. These limitations include: (i) lack of a continuous extrusion process for microcellular foaming of polyvinyl chloride (PVC) and its composites using supercritical fluids to reduce the high density of the WPCs, (ii) need for an efficient coupling agent for WPCs to overcome the poor compatibility between wood and plastic, and (iii) unproven use of wood as a filler for the biopolymer polylactide (PLA) to make "green" composites. These limitations were addressed through experimentation to develop a continuous extrusion process for microcellular foaming, and through surface modification of wood flour using natural coupling agents. The effects of wood flour, acrylic modifier and plasticizer content on the rheological properties of PVC based WPCs were studied using an extrusion capillary rheometer and a two-level factorial design. Wood flour content and acrylic modifier content were the major factors affecting the die swell ratio. Addition of plasticizer decreased the true viscosity of unfilled and filled PVC, irrespective of the acrylic modifier content. However, the addition of acrylic modifier significantly increased the viscosity of unfilled PVC but decreased the composite viscosity. Results of the rheological study were used to set baseline conditions for the continuous extrusion foaming of PVC WPCs using supercritical CO 2. Effects of material composition and processing conditions on the morphology of foamed samples were investigated. Foamed samples were produced using various material compositions and processing conditions, but steady-state conditions could not be obtained for PVC. Thus the relationships could not be determined. Incompatibility between wood flour and PVC was the focus of another study. The natural polymers chitin and chitosan were used as novel coupling agents to improve interfacial adhesion between the polymer matrix

  18. Preparation and characterization of poly-(methacrylatoethyl trimethylammonium chloride-co-vinylbenzyl chloride-co-ethylene dimethacrylate monolith

    Directory of Open Access Journals (Sweden)

    Eko Malis

    2015-05-01

    Full Text Available A polymer monolithic column, poly-(methacrylatoethyltrimethylammonium chloride-co-vinylbenzyl chloride-co-ethylene dimethacrylate or poly-(MATE-co-VBC-co-EDMA was successfully prepared in the current study by one-step thermally initiated in situ polymerization, confined in a steel tubing of 0.5 mm i.d. and 1/16” o.d. The monoliths were prepared from methacrylatoethyltrimethylammonium chloride (MATE and vinylbenzyl chloride (VBC as monomer and ethylene dimethacrylate (EDMA as crosslinker using a binary porogen system of 1-propanol and 1,4-butanediol. The inner wall of steel tubing was pretreated with 3-methacryloxypropyl-trimethoxysilane (MAPS. In order to obtain monolith with adequate column efficiency and low flow resistance, some parameters such as total monomer concentration (%T and crosslinker concentration (%C were optimized. The morphology of this monolith was assessed by scanning electron microscopy (SEM. The properties of the monolithic column, such as permeability, binding capacity, and pore size distribution were also characterized in detail. From the results of the characterization of all monolith variation, monolith with %T 30 %C 50 and %T 35 %C 50 give the best characteristic. These monoliths have high permeability, adequate molecular recognition sites (represented with binding capacity value of over 20 mg/mL, and have over 80% flow through pores in their pore structure contribute to low flow resistance. The resulted monolithic columns have promising potential for dual mode liquid chromatography. MATE may contribute for anion-exchange while VBC may responsible for reversed-phase liquid chromatography.

  19. The Limiting Phenomena at the Anode of the Electrowinning of Zinc from Zinc Chloride in a Molten Chloride Electrolyte

    OpenAIRE

    Lans, S.C.

    2004-01-01

    The objective of this research is to investigate the possibilities and technological viability for the electrowinning of zinc from zinc chloride. This research contributes to development of an alternative process, because it provides: ⢠A clear understanding and overview of the present zinc industry and future developments. ⢠A thorough literature investigation, leading to: o Understanding the reasons to abandon the proposed process route previously used (molten salt electrowinning in parti...

  20. Chloride transport and chloride thresholdvalues-Studies on concretes and mortars with Portland cement and limestone blended cement

    OpenAIRE

    Boubitsas, Dimitrios

    2015-01-01

    Reinforced concrete is one of the most widely used building materials and if it is properly designed and produced, it is an extremely durable material with a service life up to 100 years. However, under certain environmental conditions the service life of reinforced concrete structures is more limited. Deterioration of concrete structure is in most cases caused by the penetration of aggressive media from the surrounding environment. Chloride initiated reinforcement corrosion is one of t...

  1. Separating refractory and non-refractory particulate chloride and estimating chloride depletion by aerosol mass spectrometry in a marine environment

    OpenAIRE

    I. Nuaaman; Li, S.-M.; K. L. Hayden; Onasch, T. B.; Massoli, P.; D. Sueper; Worsnop, D.R.; Bates, T. S.; Quinn, P. K; McLaren, R.

    2015-01-01

    Aerosol composition and concentration measurements along the coast of California were obtained using an Aerodyne high-resolution time-of-flight aerosol mass spectrometer (HR-AMS) onboard the research vessel Atlantis during the CalNex study in 2010. This paper focuses on the measurement of aerosol chloride using the HR-AMS that can be ambiguous in regions with significant quantities of sea salt aerosols. This ambiguity arises due to large differences in the sensitivity of the HR...

  2. Acute Toxicity of Mercuric Chloride (HgCl2, Lead Chloride (PbCl2 and Zinc Sulfate (ZnSO4 on Silver Dollar Fish (Metynnis fasciatus

    Directory of Open Access Journals (Sweden)

    Ali Sadeghi

    2015-06-01

    Full Text Available Background: Since heavy metals can accumulate in the tissues of aquatic organisms, they can cause a range of hazardous effects which can become harmful to humans. The aim of this study was to investigate the acute effects of some heavy metals as potential dangerous substances by assessing the mortality effects of Mercuric Chloride (HgCl2, Lead Chloride (PbCl2 and Zinc Sulfate (ZnSO4 pollutants on a freshwater fish, silver dollar (Metynnis fasciatus. Methods: Fish samples were exposed to different concentrations of mercuric chloride (HgCl2, lead chloride (Pbcl2 and zinc sulfate (ZnSO4 for 96h and their cumulative mortality was calculated in 24h intervals. Results were analyzed by SPSS 16 to obtain number of cumulative mortality and lethal concentrations (LC10-99. Results: LC50-96h was 0.94±0.41ppm, 86.84±1.04ppm and 32.24±1.41ppm for mercuric chloride, lead chloride and zinc sulfate, respectively. So, mercury had the highest toxicity to silver dollar fish. Conclusion: Mercuric chloride and lead chloride has the lowest and highest rate of mortality among these tree metals on silver dollar fish; however, the mortality rate was increased with increasing concentrations of toxins with time.

  3. Detecting Airborne Mercury by Use of Palladium Chloride

    Science.gov (United States)

    Ryan, Margaret; Shevade, Abhijit; Kisor, Adam; Homer, Margie; Jewell, April; Manatt, Kenneth; Torres, Julia; Soler, Jessica; Taylor, Charles

    2009-01-01

    Palladium chloride films have been found to be useful as alternatives to the gold films heretofore used to detect airborne elemental mercury at concentrations of the order of parts per billion (ppb). Somewhat more specifically, when suitably prepared palladium chloride films are exposed to parts-per-billion or larger concentrations of airborne mercury, their electrical resistances change by amounts large enough to be easily measurable. Because airborne mercury adversely affects health, it is desirable to be able to detect it with high sensitivity, especially in enclosed environments in which there is a risk of leakage of mercury from lamps or other equipment. The detection of mercury by use of gold films involves the formation of gold/mercury amalgam. Gold films offer adequate sensitivity for detection of airborne mercury and could easily be integrated into an electronic-nose system designed to operate in the temperature range of 23 to 28 C. Unfortunately, in order to regenerate a gold-film mercury sensor, one must heat it to a temperature of 200 C for several minutes in clean flowing air. In preparation for an experiment to demonstrate the present sensor concept, palladium chloride was deposited from an aqueous solution onto sets of gold electrodes and sintered in air to form a film. Then while using the gold electrodes to measure the electrical resistance of the films, the films were exposed, at a temperature of 25 C, to humidified air containing mercury at various concentrations from 0 to 35 ppb (see figure). The results of this and other experiments have been interpreted as signifying that sensors of this type can detect mercury in room-temperature air at concentrations of at least 2.5 ppb and can readily be regenerated at temperatures <40 C.

  4. Chemistry and Spectroscopy of Frozen Chloride Salts on Icy Bodies

    Science.gov (United States)

    Johnson, Paul; Thomas, Elena C.; Hodyss, Robert; Vu, Tuan; Choukroun, Mathieu

    2016-10-01

    Currently, our understanding of the chemical composition of Europa's surface is our best means of inferring constraints on the subsurface ocean composition and its subsequent habitability. The bulk of our knowledge of Europa surface chemistry can be traced to near infrared spectra recorded by the Near Infrared Mapping Spectrometer on the Galileo spacecraft. However, the usefulness of this and other remote sensing data is limited by the availability of spectral libraries of candidate materials under relevant conditions (temperature, thermal/radiation history, etc.). Chloride salts are expected to exist on the surface of Europa, and other icy bodies, based on geochemical predictions of the ocean composition. In order to help improve our understanding of Europa's surface composition, we have conducted a study of frozen chloride-salt brines prepared under simulated Europa surface conditions (vacuum, temperature, and UV irradiation) using both near IR and Raman spectroscopies. Specifically, Raman spectroscopy was used to determine the hydration states of various chloride salts as a function of temperature. Near IR spectroscopy of identically prepared samples was used to provide reference reflectance spectra of the identified hydrated salts. Our results indicate that at temperatures ranging from 80 K to 233 K, hydrohalite is formed from the freezing of NaCl brines, while the freezing of KCl solutions does not form KCl hydrates. In addition, the freezing of MgCl2 solutions forms a stable hexahydrate, and the freezing of CaCl2 solutions forms a hexahydrate, a tetrahydrate, and a dihydrate. Dehydration of the salts was observed as temperatures were increased, leading to a succession of hydration states in the case of CaCl2.

  5. Modeling acid-gas generation from boiling chloride brines

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Guoxiang; Spycher, Nicolas; Sonnenthal, Eric; Steefel, Carl

    2009-11-16

    This study investigates the generation of HCl and other acid gases from boiling calcium chloride dominated waters at atmospheric pressure, primarily using numerical modeling. The main focus of this investigation relates to the long-term geologic disposal of nuclear waste at Yucca Mountain, Nevada, where pore waters around waste-emplacement tunnels are expected to undergo boiling and evaporative concentration as a result of the heat released by spent nuclear fuel. Processes that are modeled include boiling of highly concentrated solutions, gas transport, and gas condensation accompanied by the dissociation of acid gases, causing low-pH condensate. Simple calculations are first carried out to evaluate condensate pH as a function of HCl gas fugacity and condensed water fraction for a vapor equilibrated with saturated calcium chloride brine at 50-150 C and 1 bar. The distillation of a calcium-chloride-dominated brine is then simulated with a reactive transport model using a brine composition representative of partially evaporated calcium-rich pore waters at Yucca Mountain. Results show a significant increase in boiling temperature from evaporative concentration, as well as low pH in condensates, particularly for dynamic systems where partial condensation takes place, which result in enrichment of HCl in condensates. These results are in qualitative agreement with experimental data from other studies. The combination of reactive transport with multicomponent brine chemistry to study evaporation, boiling, and the potential for acid gas generation at the proposed Yucca Mountain repository is seen as an improvement relative to previously applied simpler batch evaporation models. This approach allows the evaluation of thermal, hydrological, and chemical (THC) processes in a coupled manner, and modeling of settings much more relevant to actual field conditions than the distillation experiment considered. The actual and modeled distillation experiments do not represent

  6. Modeling acid-gas generation from boiling chloride brines

    Directory of Open Access Journals (Sweden)

    Sonnenthal Eric

    2009-11-01

    Full Text Available Abstract Background This study investigates the generation of HCl and other acid gases from boiling calcium chloride dominated waters at atmospheric pressure, primarily using numerical modeling. The main focus of this investigation relates to the long-term geologic disposal of nuclear waste at Yucca Mountain, Nevada, where pore waters around waste-emplacement tunnels are expected to undergo boiling and evaporative concentration as a result of the heat released by spent nuclear fuel. Processes that are modeled include boiling of highly concentrated solutions, gas transport, and gas condensation accompanied by the dissociation of acid gases, causing low-pH condensate. Results Simple calculations are first carried out to evaluate condensate pH as a function of HCl gas fugacity and condensed water fraction for a vapor equilibrated with saturated calcium chloride brine at 50-150°C and 1 bar. The distillation of a calcium-chloride-dominated brine is then simulated with a reactive transport model using a brine composition representative of partially evaporated calcium-rich pore waters at Yucca Mountain. Results show a significant increase in boiling temperature from evaporative concentration, as well as low pH in condensates, particularly for dynamic systems where partial condensation takes place, which result in enrichment of HCl in condensates. These results are in qualitative agreement with experimental data from other studies. Conclusion The combination of reactive transport with multicomponent brine chemistry to study evaporation, boiling, and the potential for acid gas generation at the proposed Yucca Mountain repository is seen as an improvement relative to previously applied simpler batch evaporation models. This approach allows the evaluation of thermal, hydrological, and chemical (THC processes in a coupled manner, and modeling of settings much more relevant to actual field conditions than the distillation experiment considered. The actual

  7. THE ROLE OF CHLORIDE ANION AND CFTR IN KILLING OF PSEUDOMONAS AERUGINOSA BY NORMAL AND CF NEUTROPHILS

    OpenAIRE

    Painter, Richard G.; Bonvillain, Ryan W.; Valentine, Vincent G.; Lombard, Gisele A.; LaPlace, Stephanie G.; Nauseef, William M.; Wang, Guoshun

    2008-01-01

    Chloride anion is essential for myeloperoxidase to produce hypochlorous acid (HOCl) in neutrophils (PMNs). To define whether chloride availability to PMNs affects their HOCl production and microbicidal capacity, we examined how extracellular chloride concentration affects killing of Pseudomonas aeruginosa (PsA) by normal neutrophils. PMN-mediated bacterial killing was strongly dependent on extracellular chloride concentration. Neutrophils in a chloride-deficient medium killed PsA poorly. Howe...

  8. Evaluation of Ag/AgCI sensors for in-situ monitoring of freee chloride concentration in reinforced concrete structures

    OpenAIRE

    Pargar, F.; Koleva, D.A.; Copuroglu, O.; Koenders, E.A.B.; Breugel, K. van

    2014-01-01

    The level of free chloride concentration in reinforced concrete structures essentially determines the onset of steel corrosion initiation and further propagation. One of the well-known methods for monitoring free chloride concentration is using silver/silver chloride electrodes (Ag/AgCl). These electrodes are sensitive mainly to chloride ions and establish a certain electrochemical potential depending on the chloride ion activity in the environment. Although the functioning principles of thes...

  9. Corrosion Inhibition of Carbon Steel in Chloride and Sulfate Solutions

    Directory of Open Access Journals (Sweden)

    Amr Ahmed Elsayed

    2016-02-01

    Full Text Available Corrosion is a major problem in industry and in infrastructure; a huge sum of expenditure every year is spent on preventing, retarding, and repairing its damages. This work studies the engineering of an inhibitor for carbon steel metal used in the cooling systems containing high concentration of chloride and sulfate ions. For this purpose, the synergy between the dichromate, molybdate and nitrite inhibitors is examined and optimized to the best results. Moreover, care was taken that the proposed inhibitor is compliant with the environmental laws and regulations.

  10. The Humidity Sensor Using the Polyacrylic Emulsion Containing Magnesium Chloride

    Institute of Scientific and Technical Information of China (English)

    Ching-Han Yu; Jung-Chuan Chou; Tai-Ping Sun; Shen-Kan Hsiung

    2006-01-01

    An impedance type humidity sensor based on the polyacrylic emulsion containing magnesium chloride (MgCl2)without chemical modification was investigated. The impedances of the sensor were measured from various relative humidity in the frequency range between 0.1kHz and 100 kHz. The sensor has a good sensitivity from 60%RH to 90%RH. According to the experimental results, the response time is about 240 seconds in the adsorption process and 310 seconds in the desorption process.

  11. Synthesis of brookite-typed titania from titanium chloride solution

    Institute of Scientific and Technical Information of China (English)

    Satoshi OKANO; Saeki YAMAMURO; Toshiro TANAKA

    2009-01-01

    The brookite-phase TiO2 was prepared by a hydrothermal synthesis of titanium chloride solution. The thermolysis time and the pH value of the solution were controlled during the synthesis. X-ray diffraction experiments showed that TiO2 powders partially containing the brookite-phase were successfully ob-tained. A great amount of OH in the reaction solution was found to be important to obtain the brookite phase because the intermediate complex leading to the brookite phase consumes more OH- than other phases like the rutile.

  12. Synthesis of brookite-typed titania from titanium chloride solution

    Institute of Scientific and Technical Information of China (English)

    Satoshi; OKANO; Saeki; YAMAMURO; Toshiro; TANAKA

    2009-01-01

    The brookite-phase TiO2 was prepared by a hydrothermal synthesis of titanium chloride solution. The thermolysis time and the pH value of the solution were controlled during the synthesis. X-ray diffraction experiments showed that TiO2 powders partially containing the brookite-phase were successfully obtained. A great amount of OH-in the reaction solution was found to be important to obtain the brookite phase because the intermediate complex leading to the brookite phase consumes more OH- than other phases like the rutile.

  13. Multireference Calculation of the Photodissociation of Benzyl Chloride

    Institute of Scientific and Technical Information of China (English)

    CAO Jun; LIU Ya-Jun; FANG Wei-Hai

    2007-01-01

    The photodissociation mechanism of benzyl chloride (BzCl) under 248 nm has been investigated by the complete active space SCF (CASSCF) method by calculating the geometries of the ground (S0) and lower excited states,the vertical (Tv) and adiabatic (T0) excitation energies of the lower states,and the dissociation reaction pathways on the potential energy surfaces (PES) of S1, T1 and T2 states.The calculated results clearly elucidated the photodissociation mechanism of BzCl,and indicated that the photodissociation on the PES of T1 state is the most favorable.

  14. Calorimetry of 25 Ah lithium/thionyl chloride cells

    Science.gov (United States)

    Johnson, C. J.; Dawson, S.

    1991-01-01

    Heat flow measurements of 25-Ah lithium thionyl chloride cells provided a method to calculate an effective thermal potential, E(TP) of 3.907 V. The calculation is useful to determine specific heat generation of this cell chemistry and design. The E(TP) value includes heat generation by electrochemical cell reactions, competitive chemical reactions, and resistance heating at the tabs, connectors, and leads. Heat flow was measured while applying electrical loads to the cell in an isothermal calorimeter set at 0, 20, and 60 C.

  15. 4-Hydroxy-1,2,6-trimethylpyridinium chloride monohydrate

    Directory of Open Access Journals (Sweden)

    T. Seethalakshmi

    2013-06-01

    Full Text Available In the crystal of the title hydrated molecular salt, C8H12NO+·Cl−·H2O, the water molecule makes two O—H...Cl hydrogen bonds, generating [010] zigzag chains of alternating water molecules and chloride ions. The cation is bonded to the chain by an O—H...O hydrogen bond and two weak C—H...Cl interactions. Weak aromatic π–π stacking [centroid–centroid separation = 3.5175 (15 Å] occurs between the chains.

  16. Sodium Chloride, NaCl/{\\epsilon} : New Force Field

    OpenAIRE

    Fuentes-Azcatl, Raul; Barbosa, Marcia C.

    2015-01-01

    A new computational model for Sodium Chloride, the NaCl/{\\epsilon}, is proposed. The Force Fields employed here for the description of the NaCl is based on a set of radial particle-particle pair potentials involving Lennard-Jones (LJ) and Coulombic forces. The parameterization is obtained fitting the density of the crystal and the density and the dielectric constant of the mixture of salt with water at diluted solution. Our model shows good agreement with the experimental values for the densi...

  17. Electrochemical Migration on Electronic Chip Resistors in Chloride Environments

    DEFF Research Database (Denmark)

    Minzari, Daniel; Jellesen, Morten Stendahl; Møller, Per;

    2009-01-01

    Electrochemical migration behavior of end terminals on ceramic chip resistors (CCRs) was studied using a novel experimental setup in varying sodium chloride concentrations from 0 to 1000 ppm. The chip resistor used for the investigation was 10-kΩ CCR size 0805 with end terminals made of 97Sn3Pb...... alloy. Anodic polarization behavior of the electrode materials was investigated using a microelectrochemical setup. Material makeup of the chip resistor was investigated using scanning electron microscopy (SEM)/energy dispersive spectroscopy and focused-ion-beam SEM. Results showed that the dissolution...

  18. Multiple infrared photon dissociation of vinyl chloride. [Dehydrohalogenation

    Energy Technology Data Exchange (ETDEWEB)

    Lussier, F.M.; Steinfeld, J.I.

    1977-09-01

    Dehydrohalogenation of vinyl chloride, to form acetylene and HCl, is produced by irradiation with infrared laser pulses in the 9 to 11 ..mu..m region. The acetylene itself is broken down to yield diacetylene and elemental carbon and hydrogen when irradiated by focused laser pulses. Initial excitation into vibrational modes of different symmetry appears to be about equally effective in converting absorbed energy to chemical reaction. The results are analyzed in terms of several models for multiple infrared photon dissociation; threshold energies of 20 to 50 J/cm/sup 2/ are deduced.

  19. THE INFLUENCE OF CALCIUM CHLORIDE UPON EXPERIMENTAL BOTULISM.

    Science.gov (United States)

    Hall, I C; Davis, N C

    1923-03-31

    1. Calcium chloride given subcutaneously, intraperitoneally, or intravenously has been found to have no effect upon the production of botulism following the injection of Bacillus botulinus (Strain 80B) into the peritoneal cavity of guinea pigs. 2. Treatment of Bacillus botulinus with alcohol has been found markedly to decrease its toxicity for guinea pigs. This is in conformity with the work of Bronfenbrenner and Schlesinger. 3. Toxin-free spores of Bacillus botulinus have been found pathogenic for guinea pigs. 4. No prejudice as to possible results in rabbits should be based upon the above conclusions.

  20. Antiviral effect of lithium chloride on infection of cells by canine parvovirus.

    Science.gov (United States)

    Zhou, Pei; Fu, Xinliang; Yan, Zhongshan; Fang, Bo; Huang, San; Fu, Cheng; Hong, Malin; Li, Shoujun

    2015-11-01

    Canine parvovirus type 2 causes significant viral disease in dogs, with high morbidity, high infectivity, and high mortality. Lithium chloride is a potential antiviral drug for viruses. We determined the antiviral effect of Lithium Chloride on canine parvovirus type 2 in feline kidney cells. The viral DNA and proteins of canine parvovirus were suppressed in a dose-dependent manner by lithium chloride. Further investigation verified that viral entry into cells was inhibited in a dose-dependent manner by lithium chloride. These results indicated that lithium chloride could be a potential antiviral drug for curing dogs with canine parvovirus infection. The specific steps of canine parvovirus entry into cells that are affected by lithium chloride and its antiviral effect in vivo should be explored in future studies.

  1. Investigation of factors affecting the accumulation of vinyl chloride in polyvinyl chloride piping used in drinking water distribution systems.

    Science.gov (United States)

    Walter, Ryan K; Lin, Po-Hsun; Edwards, Marc; Richardson, Ruth E

    2011-04-01

    Plastic piping made of polyvinyl chloride (PVC), and chlorinated PVC (CPVC), is being increasingly used for drinking water distribution lines. Given the formulation of the material from vinyl chloride (VC), there has been concern that the VC (a confirmed human carcinogen) can leach from the plastic piping into drinking water. PVC/CPVC pipe reactors in the laboratory and tap samples collected from consumers homes (n = 15) revealed vinyl chloride accumulation in the tens of ng/L range after a few days and hundreds of ng/L after two years. While these levels did not exceed the EPA's maximum contaminant level (MCL) of 2 μg/L, many readings that simulated stagnation times in homes (overnight) exceeded the MCL-Goal of 0 μg/L. Considerable differences in VC levels were seen across different manufacturers, while aging and biofilm effects were generally small. Preliminary evidence suggests that VC may accumulate not only via chemical leaching from the plastic piping, but also as a disinfection byproduct (DBP) via a chlorine-dependent reaction. This is supported from studies with CPVC pipe reactors where chlorinated reactors accumulated more VC than dechlorinated reactors, copper pipe reactors that accumulated VC in chlorinated reactors and not in dechlorinated reactors, and field samples where VC levels were the same before and after flushing the lines where PVC/CPVC fittings were contributing. Free chlorine residual tests suggest that VC may be formed as a secondary, rather than primary, DBP. Further research and additional studies need to be conducted in order to elucidate reaction mechanisms and tease apart relative contributions of VC accumulation from PVC/CPVC piping and chlorine-dependent reactions.

  2. Simultaneous optical recording in multiple cells by digital holographic microscopy of chloride current associated to activation of the ligand-gated chloride channel GABA(A receptor.

    Directory of Open Access Journals (Sweden)

    Pascal Jourdain

    Full Text Available Chloride channels represent a group of targets for major clinical indications. However, molecular screening for chloride channel modulators has proven to be difficult and time-consuming as approaches essentially rely on the use of fluorescent dyes or invasive patch-clamp techniques which do not lend themselves to the screening of large sets of compounds. To address this problem, we have developed a non-invasive optical method, based on digital holographic microcopy (DHM, allowing monitoring of ion channel activity without using any electrode or fluorescent dye. To illustrate this approach, GABA(A mediated chloride currents have been monitored with DHM. Practically, we show that DHM can non-invasively provide the quantitative determination of transmembrane chloride fluxes mediated by the activation of chloride channels associated with GABA(A receptors. Indeed through an original algorithm, chloride currents elicited by application of appropriate agonists of the GABA(A receptor can be derived from the quantitative phase signal recorded with DHM. Finally, chloride currents can be determined and pharmacologically characterized non-invasively simultaneously on a large cellular sampling by DHM.

  3. Modelling of chloride transport in non-saturated concrete : from microscale to macroscale

    OpenAIRE

    Fenaux, Michiel

    2013-01-01

    Corrosion of steel bars embedded in concrete has a great influence on structural performance and durability of reinforced concrete. Chloride penetration is considered to be a primary cause of concrete deterioration in a vast majority of structures. Therefore, modelling of chloride penetration into concrete has become an area of great interest. The present work focuses on modelling of chloride transport in concrete. The differential macroscopic equations which govern the problem...

  4. Pitting Corrosion of Ni3(Si,Ti) Intermetallic Compound at Various Chloride Concentrations

    OpenAIRE

    Gadang Priyotomo

    2013-01-01

    The pitting corrosion of Ni3(Si,Ti) intermetallic compound was investigated as function of chloride concentration by using electrochemical method and scanning electron microscope in sodium chloride solutions at 293 K.  In addition, the pitting corrosion of type C276 alloy was also studied under the same experimental condition for comparison.  The pitting potential obtained for the intermetallic compound decreased with increasing chloride concentration.  The specific pitting potential and pitt...

  5. Determination of chloride diffusion constants for concretes of differing water to cement ratios and admixtures

    OpenAIRE

    Smith, David Gilman

    1988-01-01

    Reinforced concrete exposed to chlorides is subject to rapid deterioration once the concentration of the chloride ion in the concrete reaches a critical level to cause corrosion of the reinforcing steel. The chloride ion diffuses through concrete according to Fick's Law, which is a function of time, a driving concentration, and a diffusion constant. The diffusion constant varies with temperature and the variety of concrete . The research included determination of diffusion ...

  6. Prediction of the Chloride Resistance of Concrete Modified with High Calcium Fly Ash Using Machine Learning

    OpenAIRE

    Michał Marks; Michał A. Glinicki; Karolina Gibas

    2015-01-01

    The aim of the study was to generate rules for the prediction of the chloride resistance of concrete modified with high calcium fly ash using machine learning methods. The rapid chloride permeability test, according to the Nordtest Method Build 492, was used for determining the chloride ions’ penetration in concrete containing high calcium fly ash (HCFA) for partial replacement of Portland cement. The results of the performed tests were used as the training set to generate rules describing th...

  7. Effect of Fractal Dimension of Fine Aggregates on the Concrete Chloride Resistance

    OpenAIRE

    Xue, Wen; J. Chen

    2016-01-01

    The relationship between fractal dimension of fine aggregates and the chloride resistance of concrete was investigated in this study. Both concrete and mortar specimens were cast. Concrete specimens were in the same mix design as the mortar specimens except for the coarse aggregates. The specimens were divided into different groups based on the gradation of the fine aggregates. The chloride resistances of concrete specimens were tested by using the rapid chloride migration method. The results...

  8. Chloride-mass-balance for predicting increased recharge after land-use change

    OpenAIRE

    Gee, G.W.; Z. F. Zhang; Tyler, S.W.; Albright, W.H.; Singleton, M.J.

    2004-01-01

    The chloride-mass-balance (CMB) method has been used extensively to estimate recharge in arid and semi-arid environments. Required data include estimates of annual precipitation, total chloride input (from dry fallout and precipitation), and pore-water chloride concentrations. Typically, CMB has been used to estimate ancient recharge but recharge from recent land-use change has also been documented. Recharge rates below a few mm/yr are reliably detected with CMB; however, estimates above...

  9. Estimation of aquifer recharge by means of atmospheric chloride deposition balance

    OpenAIRE

    Custodio Gimena, Emilio

    2010-01-01

    The measurement of the atmospheric chloride deposition on land allows the estimation of long-term average aquifer recharge when the average chloride content in the recharge water is known. This is a well-established, simple method, although not exempt from theoretical and practical difficulties. In spite of its potential, it is seldom applied. Under favorable circumstances, the results are reliable and the associated uncertainty can be determined. The chloride content of recharge water ...

  10. Prediction of the Service Life of a Reinforced Concrete Column under Chloride Environment

    OpenAIRE

    Mohammad K. Alkam; Maha Alqam

    2015-01-01

    In the present investigation, service life of a reinforced concrete column exposed to chloride environment has been predicted. This study has been based on numerical simulation of chloride ion diffusion in a concrete column during its anticipated life span. The simulation process has included the concrete cover replacement whenever chloride ion concentration has reached the critical threshold value at the reinforcement surface. Repair scheduling of the concrete column under consideration has ...

  11. Effect of carbonation on the chloride diffusion of mortar specimens exposed to cyclic wetting and drying

    OpenAIRE

    Malheiro, Raphaele Lira Meireles Castro; Camões, Aires; Ferreira, Rui Miguel; Meira, Gibson; Amorim, M. T. Pessoa de

    2014-01-01

    Carbonation and chloride ingress are the two main causes of corrosion in reinforced concrete structures. Despite the combined action of these mechanisms being a reality, there is little research on the effect of carbonation on the chloride diffusion in concrete. This work intends to study the influence of carbonation on chloride diffusion of mortar specimens. Cubic mortar specimens were cast with 0.55 of water-cement ratio. After curing, the specimens were subjected to 56 days of wetting and ...

  12. Gene–environment interactions between DNA repair polymorphisms and exposure to the carcinogen vinyl chloride

    OpenAIRE

    Li, Yongliang; Marion, Marie-Jeanne; Zipprich, Jennifer; Santella, Regina M.; Freyer, Greg; Brandt-Rauf, Paul W.

    2009-01-01

    We have recently suggested that polymorphisms in metabolism and repair pathways may play a role in modulating the effects of exposure to the carcinogen vinyl chloride in the production of biomarkers of its mutagenic damage. The aim of the present study was to extend these observations by examining gene–environment interactions between several common polymorphisms in the DNA repair genes XRCC1 and ERCC2/XPD and vinyl chloride exposure on the production of vinyl chloride-induced biomarkers of m...

  13. Diffusion Decay Coefficient for Chloride Ions of Concrete Containing Mineral Admixtures

    OpenAIRE

    Jae-Im Park; Kwang-Myong Lee; Soon-Oh Kwon; Su-Ho Bae; Sang-Hwa Jung; Sung-Won Yoo

    2016-01-01

    The diffusion coefficient for chloride ions and the diffusion decay coefficient for chloride ions are essential variables for a service life evaluation of concrete structures. They are influenced by water-binder ratio, exposure condition, curing temperature, cement type, and the type and use of mineral admixture. Mineral admixtures such as ground granulated blast furnace slag, fly ash, and silica fume have been increasingly used to improve resistance against chloride ions penetration in concr...

  14. On the Durability of Sealable Circular Concrete Structures under Chloride Environment

    OpenAIRE

    Changwen Mi; Kaikai Shao; Xiaobao Li

    2015-01-01

    Reinforcement corrosion resulting from chloride attack is one major mechanism that compromises concrete durability. Numerical methods were commonly used for tackling Fick’s diffusion equations. In this paper, we developed a Crank-Nicolson based finite difference scheme suitable for circular concrete structures. Both a time-dependent surface chloride model and diffusivity were considered. The impact of an ideal sealer on chloride redistribution was further investigated. Results suggested that ...

  15. Chloride Penetration Prediction in Concrete through an Empirical Model Based on Constant Flux Diffusion

    OpenAIRE

    Vera Almenar, Guillem de; Climent, Miguel-Ángel; Viqueira Pérez, Estanislao; Antón Gil, Carlos; López García, María Pilar

    2014-01-01

    An empirical model based on constant flux is presented for chloride transport through concrete in atmospherical exposure conditions. A continuous supply of chlorides is assumed as a constant mass flux at the exposed concrete surface. The model is applied to experimental chloride profiles obtained from a real marine structure, and results are compared with the classical error-function model. The proposed model shows some advantages. It yields a better predictive capacity than the classical err...

  16. On the corrosion of reinforcing steels in concrete in the presence of chlorides

    OpenAIRE

    R. Genin, Jean Marie; Raharinaivo, Andre

    1986-01-01

    The purpose of this study is to give a scientific justification to some empirical results, in steel corrosion field, from concrete containing chlorides. First, it appears that corrosion products on the steels, have different structures and natures in function of the chloride content would be inferior or superior to a characteristic value. Second, the penetration of the chlorides in the concrete can be described by a simple Fick's diffusion law in the most frecuent cases. When cement...

  17. Influence of sodium chloride on wine yeast fermentation performance

    Directory of Open Access Journals (Sweden)

    Stilianos Logothetis

    2010-06-01

    Full Text Available Stilianos Logothetis1, Elias T Nerantzis2, Anna Gioulioti3, Tasos Kanelis2, Tataridis Panagiotis2, Graeme Walker11University of Abertay Dundee, School of Contemporary Sciences, Dundee, Scotland; 2TEI of Athens Department of Oenology and Spirit Technology, Biotechnology and Industrial Fermentations Lab Agiou Spiridonos, Athens, Greece; 3Ampeloiniki SA Industrial Park Thermi, Thessaloniki, GreeceAbstract: This paper concerns research into the influence of salt (sodium chloride on growth, viability and fermentation performance in a winemaking strain of the yeast, Saccharomyces cerevisiae. Experimental fermentations were conducted in both laboratory-scale and industrial-scale experiments. Preculturing yeasts in elevated levels of sodium chloride, or salt “preconditioning” led to improved fermentation performance. This was manifest by preconditioned yeasts having an improved capability to ferment high-sugar containing media with increased cell viability and with elevated levels of produced ethanol. Salt-preconditioning most likely influenced the stress-tolerance of yeasts by inducing the synthesis of key metabolites such as trehalose and glycerol. These compounds may act to improve cells’ ability to withstand osmostress and ethanol toxicity during fermentations of grape must. Industrial-scale trials using salt-preconditioned yeasts verified the benefit of this novel physiological cell engineering approach to practical winemaking fermentations.Keywords: salt, preconditioning, fermentation performance, Saccharomyces cerevisiae, wine

  18. Leaching of complex sulphide concentrate in acidic cupric chloride solutions

    Institute of Scientific and Technical Information of China (English)

    M. TCHOUMOU; M. ROYNETTE

    2007-01-01

    The chemical analysis of a complex sulphide concentrate by emission spectrometry and X-ray diffraction shows that it contains essentially copper, lead, zinc and iron in the form of chalcopyrite, sphalerite and galena. A small amount of pyrite is also present in the ore but does not be detected with X-ray diffraction. The cupric chloride leaching of the sulphide concentrate at various durations and solid/liquid ratios at 100 ℃ shows that the rate of dissolution of the ore is the fastest in the first several hours, and after 12 h it does not evolve significantly. If oxygen is excluded from the aqueous cupric chloride solution during the leaching experiment at 100 ℃, the pyrite in the ore will not be leached. The determination of principal dissolved metals in the leaching liquor by flame atomic absorption spectrometry, and the chemical analysis of solid residues by emission spectrometry and X-ray diffraction allow to conclude that the rate of dissolution of the minerals contained in the complex sulphide concentrate are in the order of galena>sphalerite>chalcopyrite.

  19. Intravesical oxybutinin chloride in children with intermittent catheterization: sonographic findings.

    Science.gov (United States)

    Zerin, J M; DiPietro, M A; Ritchey, M L; Bloom, D A

    1994-01-01

    The sonographic findings in the bladder are presented in four children with myelomeningocele and neurogenic dysfunction of the bladder, who were treated with intermittent self-catheterization and intravesical oxybutinin chloride. All were referred for routine sonography of the urinary tract. Each had infused a crushed tablet of oxybutinin chloride intravesically 30-120 min before the examination. In two children, brightly echogenic, non-shadowing particles were suspended in the bladder urine. In one of these, the particles swirled giving the impression of a "snowstorm"; in the other, most of the particles gradually settled forming an irregular clump on the bladder base. In the remaining two children, the urine appeared diffusely hazy with innumerable tiny particles giving the impression of a fine mist filling the bladder. The sonographic appearance of the urine in the bladder after intravesical instillation of crushed tablets can be dramatic and can simulate pus, blood, fungus, or other debris in the bladder lumen. In the absence of clinical symptoms or hematuria, a history of recent infusion of medication into the bladder should be sought.

  20. Thyrotoxicity of the Chlorides of Cadmium and Mercury in Rabbit

    Institute of Scientific and Technical Information of China (English)

    NINAGHOSH; SHELLEYBHATTACHARYA

    1992-01-01

    Exposure to heavy metals such as cadmium and mercury is of immediate environmental concern.The present study was aimed at establishing a direct relationship between heavy metal poisoning and thyroid dysfunction.Cadmium and mercury treatment at LD50 levels resulted in severe thyrotoxicosis in the rabbit.Within 24h of intramuscular administration of cadmium chloride 15 mg·kg-1 body weight(bw)and mercury chloride20mg·kg-1 bw,thyroid peroxidase activity increased significantly over the control with a concomitant rise in the triiodothyronie(T3)titre.On the other hand,there was a remarkable fall in the thyroxine(T4)level,and the T3,T4 ratio was high as compared with the control.Evidence indicates that acute heavy metal lethality will induce immediate hyperthyroidism.It is suggested that T3-toxicosis may be produced by a preferential synthesis of T3 and/or preferential deiodination of T4 to T3.Measurement of T3 and T4 levels may thus e utilized as a reliable indicator of heavy metal lethality.

  1. Large Scale Synthesis of Carbon Nanofibres on Sodium Chloride Support

    Directory of Open Access Journals (Sweden)

    Ravindra Rajarao

    2012-06-01

    Full Text Available Large scale synthesis of carbon nanofibres (CNFs on a sodium chloride support has been achieved. CNFs have been synthesized using metal oxalate (Ni, Co and Fe as catalyst precursors at 680 C by chemical vapour deposition method. Upon pyrolysis, this catalyst precursors yield catalyst nanoparticles directly. The sodium chloride was used as a catalyst support, it was chosen because of its non‐toxic and water soluble nature. Problems, such as the detrimental effect of CNFs, the detrimental effects on the environment and even cost, have been avoided by using a water soluble support. The structure of products was characterized by scanning electron microscopy, transmission electron microscopy and Raman spectroscopy. The purity of the grown products and purified products were determined by the thermal analysis and X‐ray diffraction method. Here we report the 7600, 7000 and 6500 wt% yield of CNFs synthesized over nickel, cobalt and iron oxalate. The long, curved and worm shaped CNFs were obtained on Ni, Co and Fe catalysts respectively. The lengthy process of calcination and reduction for the preparation of catalysts is avoided in this method. This synthesis route is simple and economical, hence, it can be used for CNF synthesis in industries.

  2. Formulation and Characterization of Cetylpyridinium Chloride Bioadhesive Tablets

    Science.gov (United States)

    Akbari, Jafar; Saeedi, Majid; Morteza-Semnani, Katayoun; Kelidari, Hamidreza; Lashkari, Maryam

    2014-01-01

    Purpose: Bioadhesive polymers play an important role in biomedical and drug delivery applications. The aim of this study is to develop a sustained- release tablet for local application of Cetylpyridinium Chloride (CPC). This delivery system would supply the drug at an effective level for a long period of time, and thereby overcome the problem of the short retention time of CPC and could be used for buccal delivery as a topical anti-infective agent. Methods: CPC bioadhesive tablets were directly prepared using 7 mm flat-faced punches on a hydraulic press. The materials for each tablet were weighted, introduced into the die and compacted at constant compression pressure. The dissolution tests were performed to the rotation paddle method and the bioadhesive strength of the tablets were measured. Results: The results showed that as the concentration of polymer increased, the drug release rate was decreased. Also the type and ratio of polymers altered the release kinetic of Cetylpyridinium Chloride from investigated tablets. The bioadhesion strength increased with increasing the concentration of polymer and maximum bioadhesion strength was observed with HPMC K100M. Conclusion: The selected formulation of CPC bioadhesive tablet can be used as a suitable preparation for continuous release of CPC with appropriate bioadhesion strength. PMID:25436196

  3. Coagulation properties of anelectrochemically prepared polyaluminum chloride containing active chlorine

    Institute of Scientific and Technical Information of China (English)

    HU Chengzhi; LIU Huijuan; QU Jiuhui

    2006-01-01

    With high content of the Al13 species and the active chloride, an electrochemically prepared polyaluminum chloride (E-PACl) presents integrated efficiency of coagulation and oxidation. The coagulation properties of E-PACl were systemically investigated through jar tests in the various water quality conditions. The active chlorine in E-PACl can significantly influence the coagulation behavior due to the active chlorine preoxidation, which can change the surface charge characteristic of organic matter (OM) in water. The active chlorine preoxidation could improve the E-PACl coagulation efficiency if the water possessed the characteristics of relatively low OM content (2 mg/L) and high hardness (278 mg CaCO3/L). In the water with medium content of OM (5 mg/L), dosage would be a crucial factor to decide whether the active chlorine in E-PACl aided coagulation process or not. Comparing with alkaline condition, active chlorine would show a more significant influence on the coagulation process in acidic region.

  4. Gadolinium chloride pretreatment ameliorates acute cadmium-induced hepatotoxicity.

    Science.gov (United States)

    Kyriakou, Loukas G; Tzirogiannis, Konstantinos N; Demonakou, Maria D; Kourentzi, Kalliopi T; Mykoniatis, Michael G; Panoutsopoulos, Georgios I

    2013-08-01

    Cadmium is a known industrial and environmental pollutant. It causes hepatotoxicity upon acute administration. Features of cadmium-induced acute hepatoxicity encompass necrosis, apoptosis, peliosis and inflammatory infiltration. Gadolinium chloride (GdCl3) may prevent cadmium-induced hepatotoxicity by suppressing Kupffer cells. The effect of GdCl3 pretreatment on a model of acute cadmium-induced liver injury was investigated. Male Wistar rats 4-5 months old were injected intraperitoneally with normal saline followed by cadmium chloride (CdCl2; 6.5 mg/kg) or GdCl3 (10 mg/kg) followed by CdCl2 (6.5 mg/kg; groups I and II, respectively). Rats of both the groups were killed at 9, 12, 16, 24, 48 and 60 h after cadmium intoxication. Liver sections were analyzed for necrosis, apoptosis, peliosis and mitoses. Liver regeneration was also evaluated by tritiated thymidine incorporation into hepatic DNA. Serum levels of aspartate aminotransferase (AST) and alanine aminotransferase (ALT) were also determined. Hepatic necrosis, hepatocyte and nonparenchymal cell apoptosis and macroscopic and microscopic types of peliosis hepatis were minimized by gadolinium pretreatment. Serum levels of AST and ALT were also greatly diminished in rats of group II. Tritiated thymidine incorporation into hepatic DNA was increased in gadolinium pretreatment rats. Kupffer cell activation was minimal in both the groups of rats. Gadolinium pretreatment attenuates acute cadmium-induced liver injury in young Wistar rats, with mechanisms other than Kupffer cell elimination.

  5. Accurate ab initio vibrational energies of methyl chloride

    Energy Technology Data Exchange (ETDEWEB)

    Owens, Alec, E-mail: owens@mpi-muelheim.mpg.de [Max-Planck-Institut für Kohlenforschung, Kaiser-Wilhelm-Platz 1, 45470 Mülheim an der Ruhr (Germany); Department of Physics and Astronomy, University College London, Gower Street, WC1E 6BT London (United Kingdom); Yurchenko, Sergei N.; Yachmenev, Andrey; Tennyson, Jonathan [Department of Physics and Astronomy, University College London, Gower Street, WC1E 6BT London (United Kingdom); Thiel, Walter [Max-Planck-Institut für Kohlenforschung, Kaiser-Wilhelm-Platz 1, 45470 Mülheim an der Ruhr (Germany)

    2015-06-28

    Two new nine-dimensional potential energy surfaces (PESs) have been generated using high-level ab initio theory for the two main isotopologues of methyl chloride, CH{sub 3}{sup 35}Cl and CH{sub 3}{sup 37}Cl. The respective PESs, CBS-35{sup  HL}, and CBS-37{sup  HL}, are based on explicitly correlated coupled cluster calculations with extrapolation to the complete basis set (CBS) limit, and incorporate a range of higher-level (HL) additive energy corrections to account for core-valence electron correlation, higher-order coupled cluster terms, scalar relativistic effects, and diagonal Born-Oppenheimer corrections. Variational calculations of the vibrational energy levels were performed using the computer program TROVE, whose functionality has been extended to handle molecules of the form XY {sub 3}Z. Fully converged energies were obtained by means of a complete vibrational basis set extrapolation. The CBS-35{sup  HL} and CBS-37{sup  HL} PESs reproduce the fundamental term values with root-mean-square errors of 0.75 and 1.00 cm{sup −1}, respectively. An analysis of the combined effect of the HL corrections and CBS extrapolation on the vibrational wavenumbers indicates that both are needed to compute accurate theoretical results for methyl chloride. We believe that it would be extremely challenging to go beyond the accuracy currently achieved for CH{sub 3}Cl without empirical refinement of the respective PESs.

  6. Formulation and Characterization of Cetylpyridinium Chloride Bioadhesive Tablets

    Directory of Open Access Journals (Sweden)

    Jafar Akbari

    2014-12-01

    Full Text Available Purpose: Bioadhesive polymers play an important role in biomedical and drug delivery applications. The aim of this study is to develop a sustained- release tablet for local application of Cetylpyridinium Chloride (CPC. This delivery system would supply the drug at an effective level for a long period of time, and thereby overcome the problem of the short retention time of CPC and could be used for buccal delivery as a topical anti-infective agent. Methods: CPC bioadhesive tablets were directly prepared using 7 mm flat-faced punches on a hydraulic press. The materials for each tablet were weighted, introduced into the die and compacted at constant compression pressure. The dissolution tests were performed to the rotation paddle method and the bioadhesive strength of the tablets were measured. Results: The results showed that as the concentration of polymer increased, the drug release rate was decreased. Also the type and ratio of polymers altered the release kinetic of Cetylpyridinium Chloride from investigated tablets. The bioadhesion strength increased with increasing the concentration of polymer and maximum bioadhesion strength was observed with HPMC K100M. Conclusion: The selected formulation of CPC bioadhesive tablet can be used as a suitable preparation for continuous release of CPC with appropriate bioadhesion strength.

  7. Intravesical oxybutinin chloride in children with intermittent catheterization: sonographic findings.

    Science.gov (United States)

    Zerin, J M; DiPietro, M A; Ritchey, M L; Bloom, D A

    1994-01-01

    The sonographic findings in the bladder are presented in four children with myelomeningocele and neurogenic dysfunction of the bladder, who were treated with intermittent self-catheterization and intravesical oxybutinin chloride. All were referred for routine sonography of the urinary tract. Each had infused a crushed tablet of oxybutinin chloride intravesically 30-120 min before the examination. In two children, brightly echogenic, non-shadowing particles were suspended in the bladder urine. In one of these, the particles swirled giving the impression of a "snowstorm"; in the other, most of the particles gradually settled forming an irregular clump on the bladder base. In the remaining two children, the urine appeared diffusely hazy with innumerable tiny particles giving the impression of a fine mist filling the bladder. The sonographic appearance of the urine in the bladder after intravesical instillation of crushed tablets can be dramatic and can simulate pus, blood, fungus, or other debris in the bladder lumen. In the absence of clinical symptoms or hematuria, a history of recent infusion of medication into the bladder should be sought. PMID:7824373

  8. Hydrodynamic simulation of a lithium chloride salt system.

    Energy Technology Data Exchange (ETDEWEB)

    Eberle, C. S.; Herrmann, S. D.; Knighton, G. C.

    1999-02-12

    A fused lithium chloride salt system's constitutive properties were evaluated and compared to a number of fluid properties, and water was shown to be an excellent simulant of lithium chloride salt. With a simple flow model, the principal scaling term was shown to be a function of the kinematic viscosity. A water mock-up of the molten salt was also shown to be within a {+-}3% error in the scaling analysis. This made it possible to consider developing water scaled tests of the molten salt system. Accurate flow velocity and pressure measurements were acquired by developing a directional velocity probe. The device was constructed and calibrated with a repeatable accuracy of {+-}15%. This was verified by a detailed evaluation of the probe. Extensive flow measurements of the engineering scale mockup were conducted, and the results were carefully compared to radial flow patterns of a straight blade stirrer. The flow measurements demonstrated an anti-symmetric nature of the stirring, and many additional effects were also identified. The basket design was shown to prevent fluid penetration into the fuel baskets when external stirring was the flow mechanism.

  9. QUALITY OF YOGHURTS FROM GOAT'S MILK ENRICHED WITH MAGNESIUM CHLORIDE

    Directory of Open Access Journals (Sweden)

    Agata Znamirowska

    2015-02-01

    Full Text Available Goat’s milk can be enriched with magnesium in the form of chloride before pasteurization with a save dose, i.e. 20 mg of magnesium for 100 g of milk. Higher doses of magnesium can lead to coagulation of proteins since together with the increase of the dose of fortification there increases general acidity while pH of milk decreases. Together with the increase of the dose of fortification of yoghurts with magnesium there was shown an essential proportional increase of acidity and hardness of curds persisting for 21 days of storage. Enriching goat’s milk yoghurts with magnesium decreased the intensity of „goat” smell and aftertaste and did not cause a change in colour. The most favourable solution is the production of goat’s milk yoghurts enriched with 10-20 mg of magnesium in the form of magnesium chloride. Such doses of enrichment caused successive lowering of perceptibility of „goat” aftertaste and smell together with extension of storage time.

  10. Synthesis and thermal behavior of polyacrylonitrile/vinylidene chloride copolymer

    Directory of Open Access Journals (Sweden)

    Robson Fleming

    2014-06-01

    Full Text Available Polyacrylonitrile fiber encompasses a broad range of products based on acrylonitrile (AN which is readily copolymerized with a wide range of ethylenic unsaturated monomers giving rise to polymers with different characteristics and applications. Such products can be designed for cost-effective, flame and heat resistant solutions for the textile industry, aircraft and automotive markets. In the present work acrylonitrile was copolymerized with vinylidene chloride (VDC by conventional suspension polymerization process via redox system, with an initial content of 10%/mass of the VDC monomer. The copolymer average molecular weight was obtained by Gel Permeation Chromatography (GPC and by intrinsic viscosity analysis. To control the polymerization process continuously, qualitative and quantitative analysis of the chloride content in the PAN AN/VDC copolymer structure was accomplished by using X-ray fluorescence and potentiometric titration techniques. A good correlation was found between these two techniques, leading to a straightforward verification of VDC in the polymer structure. The thermal behavior of PAN AN/VDC copolymer was performed by Differential Scanning Calorimetry (DSC and Thermogravimetric Analysis (TGA. The results showed that VDC monomers exhibited a nearly stoichiometric reaction with acrylonitrile, copolymerizing about 90% of its initial mass. VDC changed significantly the polyacrylonitrile thermal behavior, decreasing the polymer degradation temperature by about 40-50°C.

  11. Safe, Selective, and High-Yielding Synthesis of Acryloyl Chloride in a Continuous-Flow System.

    Science.gov (United States)

    Movsisyan, Marine; Heugebaert, Thomas S A; Dams, Rudy; Stevens, Christian V

    2016-08-01

    Acid chlorides are an important class of compounds and their high reactivity and instability has prompted us to develop a straightforward procedure for their synthesis with on-demand and on-site synthesis possibilities. The focus of this report is acryloyl chloride, mainly important for the acrylate and polymer industry. A continuous-flow methodology was developed for the fast and selective synthesis of the otherwise highly unstable acryloyl chloride. Three routes were investigated in a microreactor setup and all three can potentially be used for its production. The methodology was further expanded to the synthesis of other unstable acid chlorides by both the thionyl chloride and the oxalyl chloride mediated processes. The most sustainable method was the oxalyl chloride mediated procedure under solvent-free conditions, in which near-equimolar amounts of carboxylic acid and oxalyl chloride were used in the presence of catalytic amounts of DMF at room temperature. Within 1 to 3 min, nearly full conversions into the acid chlorides were achieved. PMID:27325562

  12. Influence of Fly Ash on Surface Chloride Concentration Under Shallow Immersion Condition

    OpenAIRE

    Liu, Jun; Wang, Xiaodong; Xing, Feng; Han, Ningxu

    2014-01-01

    In this paper, the influence of fly ash content on concrete surface chloride concentration was investigated through periodical tests of surface chloride concentration of concrete by immersing three kinds of concrete specimens in 5.0 wt.% sodium chloride solution. One kind of specimen is common concrete without fly ash, whereas the other two kinds of specimens are mixed with fly ash. The results show that the surface chloride ion concentration ranges from 0.295 to 0.777 wt.% for the immersed c...

  13. Mechanism of sodium chloride in promoting reduction of high-magnesium low-nickel oxide ore

    OpenAIRE

    Shiwei Zhou; Yonggang Wei; Bo Li; Hua Wang; Baozhong Ma; Chengyan Wang

    2016-01-01

    Sodium chloride has been proved that it is an effective promoter for the reduction of high-magnesium, low-nickel oxide ore. The aim of current work is to clarify the promotion behavior of sodium chloride in the roasting reduction process. The influence of moisture on the reduction of ore in the presence of sodium chloride is studied to get clear comprehension of promotion process. In the presence of moisture, the HCl is produced by pyrohydrolysis of sodium chloride for chlorinating nickel and...

  14. Indium sulfide precipitation from hydrochloric acid solutions of calcium and sodium chlorides

    International Nuclear Information System (INIS)

    The effect of precipitation duration, acid concentration, indium complexing with chloride ions on the process of indium sulfide chemical precipitation in hydrochloric acid solutions, precipitate composition and dispersity are studied. It is established that indium sulfide solubility increases in solutions with acid concentration exceeding 0.40-0.45 mol/l. Calcium and indium chloride addition to diluted hydrochloric solutions greatly increases the solubility of indium sulfide. The effect of calcium chloride on In2S3 solubility is higher than that of sodium chloride

  15. On the Durability of Sealable Circular Concrete Structures under Chloride Environment

    Directory of Open Access Journals (Sweden)

    Changwen Mi

    2015-01-01

    Full Text Available Reinforcement corrosion resulting from chloride attack is one major mechanism that compromises concrete durability. Numerical methods were commonly used for tackling Fick’s diffusion equations. In this paper, we developed a Crank-Nicolson based finite difference scheme suitable for circular concrete structures. Both a time-dependent surface chloride model and diffusivity were considered. The impact of an ideal sealer on chloride redistribution was further investigated. Results suggested that the chloride threshold depth in a concrete structure is greatly affected by the radius of curvature, environment severity, and diffusivity. For sealable concrete structures, both the sealer application timing and location are of great importance.

  16. Response to comments on "Local impermeant anions establish the neuronal chloride concentration"

    DEFF Research Database (Denmark)

    Glykys, J; Dzhala, V; Egawa, K;

    2014-01-01

    We appreciate the interest in our paper and the opportunity to clarify theoretical and technical aspects describing the influence of Donnan equilibria on neuronal chloride ion (Cl(-)) distributions....

  17. Protective effect and mechanism of lithium chloride pretreatment on myocardial ischemia-reperfusion injury in rats

    Institute of Scientific and Technical Information of China (English)

    Fang-Jiang Li; Tao Hsu; Hui-Xian Li; Jin-Zheng Shi; Mei-Ling Du; Xiao-Yuan Wang; Wen-Ting Zhang

    2014-01-01

    Objective:To investigate the protective effect and mechanism of lithium chloride pretreatment on myocardial ischemia-reperfusion injury(I-RI) in rats.Methods:A total of60SD rats were randomly divided into control group, model group, lithium chloride intervention group and L-arginine methyl ester+ lithium chloride intervention group with15 in each.TheI-RI model was established in model group, the lithium chloride intervention group andL-arginine methyl ester+ lithium chloride intervention group by method of seaming along left anterior descending coronary artery myocardial, control group was only opened the chest without seaming,ST-elevation within2 min was regarded as modeling success.Model group did not adopted any intervention, lithium chloride intervention group was treated with lithium chloride injection 15 mg/kg by jugular venipuncture preoperatively,L-arginine methyl ester+ lithium chloride intervention group was treated with intraperitoneal injection of30 mg•kg-1•d-1L-arginine methyl ester7 d before the test, and intravenous catheter of15 mg/kg lithium chloride preoperatively. The hydroxybutyric acid dehydrogenase(HBDH), creatine kinase isoenzyme(CK-MB), superoxide dismutase(SOD), malondialdehyde(MDA) level and nitric oxide synthase(NOS) activites were tested.Each large area of myocardial ischemia tissue was extracted for determination of the MDA content,SOD activity in tissue and serum, and morphological changes of myocardial tissue.Results:SOD activity was highest in lithium chloride intervention group, followed by L-arginine methyl ester+ lithium chloride intervention group, control group and model group (P0.05);HBDH andCK-MB of plasma were highest in model group, followed byL-arginine methyl ester+ lithium chloride intervention group, lithium chloride intervention group and control group(P<0.05).A significantly lighter myocardial damage was observed microscopically in lithium chloride intervention group than that inL-arginine methyl ester+ lithium

  18. Lifetime performance characteristics of screen-printed potentiometric Ag/AgCl chloride sensors

    OpenAIRE

    Cranny, Andrew; Harris, Nick; Lewis, Adam; Nie, Menyang; Wharton, Julian; Wood, Robert; Stokes, Keith

    2010-01-01

    Ag/AgCl chloride sensors were fabricated using thick-film technology. A number of different formulations were prepared and chloride responses were investigated over time. Near Nernstian, identical responses were observed over the first 160 days with an average chloride sensitivity of -51.8 ± 0.4 mV per decade change in chloride concentration (pCl), irrespective of paste formulation. After 6- months continuous immersion in tap water, pastes formulated with a glass binder began to exhibit a los...

  19. Congenital Chloride Diarrhea - Novel Mutation in SLC26A3 Gene.

    Science.gov (United States)

    Bhardwaj, Swati; Pandit, Deepti; Sinha, Aditi; Hari, Pankaj; Cheong, Hae Il; Bagga, Arvind

    2016-08-01

    The authors report a case of congenital chloride diarrhea with molecular confirmation of diagnosis. A 10-mo-old boy presented with failure to thrive, voluminous diarrhea, dehydration, hyponatremia, hypokalemia, metabolic alkalosis and history of maternal polyhydramnios. The diagnosis of congenital chloride diarrhea was based on high fecal and low urinary chloride excretion, in addition to biochemical abnormalities. Genetic testing revealed a novel homozygous mutation in exon 4 of the SLC26A3 gene that encodes the protein regulating chloride bicarbonate absorption in distal ileum and colon. Therapy with oral fluids and electrolytes led to decrease in stool frequency and improvement in growth parameters. PMID:26637435

  20. Technical Note: Could benzalkonium chloride be a suitable alternative to mercuric chloride for preservation of seawater samples?

    Directory of Open Access Journals (Sweden)

    J. Gloël

    2015-08-01

    Full Text Available Instrumental equipment unsuitable or unavailable for fieldwork as well as lack of ship space can necessitate the preservation of seawater samples prior to analysis in a shore-based laboratory. Mercuric chloride (HgCl2 is routinely used for such preservation, but its handling and subsequent disposal incur significant risks and expense. Benzalkonium chloride (BAC has been used previously for freshwater samples. Here, we assess BAC as a less hazardous alternative microbial inhibitor for marine samples prior to the measurement of oxygen-to-argon (O2/Ar ratios, as used for the determination of plankton net community production. BAC at a concentration of 50 mg dm−3 inhibited microbial activity for at least three days in seawater with chlorophyll a (Chl a concentrations up to 1 mg m−3, possibly longer when Chl a concentrations were lower. BAC concentrations of 100 and 200 mg dm−3 were no more effective than 50 mg dm−3. With fewer risks to human health and the environment, and no requirement for expensive waste disposal, BAC could be a viable alternative to HgCl2 for short-term preservation of seawater samples, but is not a replacement for HgCl2 in the case of oxygen triple isotope analysis, which requires storage over weeks to months. In any event, further tests on a case-by-case basis should be undertaken if use of BAC was considered, since its inhibitory activity may depend on concentration and composition of the microbial community.

  1. Effet of Mercuric Chloride and Cadmium Chloride on Gonadal Function and Its regulation in Sexually Mature Common Carp Cyprinus carpio

    Institute of Scientific and Technical Information of China (English)

    DilipMUKHERJEE; VinodKumar; 等

    1994-01-01

    Gnadal function in fish,Cyprinus carpio was significantly affected by sublethal doses of mecuric chloride(HgCl2)and cadmium chloride(CdCl2)in chronic(45days)exposure,Parameters investigated were nonesterified(NE)and esterified(E)cholesterol of ovary, liver and serum and ovarian 3β-Hydroxysteroid and 17β-Hydroxysteroid dehydrogenase enzyme activity and servum and pituitary gonadotropin(GtH)levels.Both the pollutats were able to reduce the hypothalamic extract(HE)or gonadotropin releasing hormone (GnRH)induced pituiteray GtH release in vitro.Short term(96h)exposure of the fish to the polltants had no significant effect on the gonadal founction.In addition to the deleterious effect of pollutants on the gonadal steroidogenesis and pituitary gonadotropin release,using [4-14C] cholesterol as a tracer it was found that for 45 days exposure,HgCl2 had an adverse effect on the transport of cholesterol from circulation to ovary.

  2. Technical note: Could benzalkonium chloride be a suitable alternative to mercuric chloride for preservation of seawater samples?

    Science.gov (United States)

    Gloël, J.; Robinson, C.; Tilstone, G. H.; Tarran, G.; Kaiser, J.

    2015-12-01

    Instrumental equipment unsuitable or unavailable for fieldwork as well as lack of ship space can necessitate the preservation of seawater samples prior to analysis in a shore-based laboratory. Mercuric chloride (HgCl2) is routinely used for such preservation, but its handling and subsequent disposal incur environmental risks and significant expense. There is therefore a strong motivation to find less hazardous alternatives. Benzalkonium chloride (BAC) has been used previously as microbial inhibitor for freshwater samples. Here, we assess the use of BAC for marine samples prior to the measurement of oxygen-to-argon (O2 / Ar) ratios, as used for the determination of biological net community production. BAC at a concentration of 50 mg dm-3 inhibited microbial activity for at least 3 days in samples tested with chlorophyll a (Chl a) concentrations up to 1 mg m-3. BAC concentrations of 100 and 200 mg dm-3 were no more effective than 50 mg dm-3. With fewer risks to human health and the environment, and no requirement for expensive waste disposal, BAC could be a viable alternative to HgCl2 for short-term preservation of seawater samples, but is not a replacement for HgCl2 in the case of oxygen triple isotope analysis, which requires storage over weeks to months. In any event, further tests on a case-by-case basis should be undertaken if use of BAC was considered, since its inhibitory activity may depend on concentration and composition of the microbial community.

  3. Chloride content and pH value in the pore solution of concrete under carbonation

    Institute of Scientific and Technical Information of China (English)

    Xiao-mei WAN; Folker H.WITTMANN; Tie-jun ZHAO; Hong FAN

    2013-01-01

    Chloride content and the pH value of the pore solution in the neighborhood of steel reinforcement are decisive parameters for initiation and rate of corrosion.The pore solution of cement mortar and hardened cement paste has been expressed from the pore space by high pressure in the investigation.The influence of the water-cement ratio,age,and addition of chloride to the fresh mix on chloride content in the pore solution has been determined by ion chromatography.At the same time the pH value of the pore solution has been determined.The dissolved chloride content decreases with increase in the water-cement ratio.The amount of bound chloride increases with time,but it decreases with decreasing content of dissolved chloride in the pore solution.A significant influence of carbonation on the dissolved chloride content of the pore solution has been observed.With complete carbonation,the dissolved chloride content in cement mortar and hardened cement paste increases by a factor between 2 and 12.The bound chloride decreases by 27%-54%.As expected,the pH value decreases from around 13.2 to as low as 8.0 due to carbonation.It can be concluded that carbonation not only lowers the pH value but liberates bound chloride.This is one obvious reason why the combined action of chloride penetration and carbonation accelerates steel corrosion and shortens the service life of reinforced concrete structures.

  4. Modeling Fate and Transport of Chloride from Deicers in Urban Floodplains: Implications for Urban Planning

    Science.gov (United States)

    Ledford, S. H.; Lautz, L.

    2015-12-01

    Road salting in urban areas of the northeastern United States increases chloride concentrations in urban streams. Groundwater storage of saline road runoff results in increased surface water chloride concentrations through time, even in non-winter months. Stream-groundwater (SW-GW) interactions promote buffering of large seasonal swings in stream chloride concentrations, resulting in lower surface water chloride in winter and higher concentrations in summer, relative to streams hydrologically disconnected from riparian floodplains. However, the hydrogeologic processes controlling salt storage and transport in urban floodplain aquifers have not been fully investigated. We developed a 3D numerical groundwater flow and solute transport model of an urban floodplain in Syracuse, New York, using MODFLOW and MT3DMS. We ran the model for 1 year, calibrating to three conditions: water table elevations along a riparian transect, measurements of net groundwater flux to the stream along the 500-m reach, and chloride concentrations in groundwater through time in riparian wells. Chloride enters the riparian aquifer via three pathways: hillslope groundwater discharge, hyporheic exchange, and groundwater recharge during overbank flooding events. Winter overbank flooding events are the primary source of chloride to floodplain sediments. While hillslope groundwater discharge results in relatively uniform chloride through time in high conductivity units, surficial floodplain sediments with lower conductivity have high chloride concentrations from winter overbank flood events. When compared to road salt application rates (up to 20 tons of salt per lane kilometer per year), the 0.013 km2 floodplain holds only a tiny fraction of chloride applied in a watershed (>100 km of road in the watershed). To promote riparian aquifer storage of road salt and buffering of stream chloride concentrations, urban planners should design urban floodplains for frequent winter flooding events, and allow

  5. Dynamic [Cl{sup -}]{sub i} measurement with chloride sensing quantum dots nanosensor in epithelial cells

    Energy Technology Data Exchange (ETDEWEB)

    Wang Yuchi; Mao Hua; Wong, Lid B, E-mail: ywang@biotechplex.com [BioTechPlex Corporation, 1205 Linda Vista Drive Suite A, San Marcos, CA 92078 (United States); Cytoptics Corporation, 1205 Linda Vista Drive Suite B, San Marcos, CA 92078 (United States)

    2010-02-05

    We have synthesized a chloride sensing quantum dots (QD) nanosensor, Cl-QD, for the dynamic measurements of chloride ion concentration in the millimolar range, a sensitivity that is applicable to most physiological intracellular chloride ion concentration ([Cl{sup -}]{sub i}) measurements in epithelial cells. The Cl-QD is synthesized by conjugating an anion receptor, 1-(2-mercapto-ethyl)-3-phenyl-thiourea (MEPTU) to a water soluble CdSe/ZnS QD at an emission wavelength of 620 nm. Upon binding of chloride ions to the Cl-QD, a photo-induced electron transfer mechanism caused the fluorescence of the QD to quench. This resulted in an inversely proportional relationship between the chloride ion concentration and the fluorescence intensity of the Cl-QD. We have utilized this Cl-QD to measure [Cl{sup -}]{sub i} in T84 and CF-PAC cultured cells, with either the C1C-2 or CFTR chloride channels being manipulated by pharmacological chloride channel activators and inhibitors. Activations of C1C-2 and CFTR chloride channels in T84 by the respective lubiprostone and genistein caused predictive increases in the fluorescence of the Cl-QD, i.e., a decrease of [Cl{sup -}]{sub i}. Conversely, glibenclamide, a chloride channel inhibitor, applied to the CF-PAC cells caused a predictable decrease in the fluorescence of Cl-QD due to the increase of [Cl{sup -}]{sub i}. These are the first data in using QD-based chloride ion sensors for dynamic measurements of intracellular chloride ion concentrations in epithelial cells.

  6. Cystic fibrosis transmembrane conductance regulator and the outwardly rectifying chloride channel: a relationship between two chloride channels expressed in epithelial cells.

    Science.gov (United States)

    Hryciw, D H; Guggino, W B

    2000-11-01

    1. Mutations in the cystic fibrosis transmembrane conductance regulator (CFTR) result in the primary defect observed in patients with cystic fibrosis. 2. The CFTR is a member of the ATPase-binding cassette (ABC) transporter family but, unlike other members of this group, CFTR conducts a chloride current that is activated by cAMP. 3. In epithelial cells, the cAMP-stimulated chloride current is conducted by both CFTR and the outwardly rectifying chloride channel (ORCC). 4. The present review summarizes the current knowledge of the properties of the two channels, as well as their relationship. Because the gene encoding the ORCC has not been identified, a discussion as to possible candidates for this chloride channel is included. PMID:11071305

  7. Effects of antigliomatin from the scorpion venom of Buthus martensii Karsch on chloride channels on C6 glioma cells

    Institute of Scientific and Technical Information of China (English)

    Zan Wang; Mingxian Li; Hongmei Meng; Min Huang; Weihong Lin; Li Cui; Shao Wang

    2011-01-01

    Using whole-cell patch-clamp recordings, the effects of antigliomatin were observed on chloride channels on C6 glioma cells cultured in vitro. Antigliomatin was extracted from the venom of the scorpion Buthus martensii Karsch. Chloride channels are closed under normal osmotic pressure. When osmotic pressure was reduced to 120, 110 and 100 mV, the cell volume enlarged, chloride channels opened, and the chloride channel current increased. Three minutes after antigliomatin treatment, the chloride channel current decreased in a dose-dependent manner. These results show that antigliomatin extracted from the venom of the scorpion Buthus martensii Karsch diminishes chloride channel currents on C6 glioma cells.

  8. Mild and efficient cyanuric chloride catalyzed Pictet–Spengler reaction

    Directory of Open Access Journals (Sweden)

    Ashish Sharma

    2013-06-01

    Full Text Available A practical, mild and efficient protocol for the Pictet–Spengler reaction catalyzed by cyanuric chloride (trichloro-1,3,5-triazine, TCT is described. The 6-endo cyclization of tryptophan/tryptamine and modified Pictet–Spengler substrates with both electron-withdrawing and electron-donating aldehydes was carried out by using a catalytic amount of TCT (10 mol % in DMSO under a nitrogen atmosphere. TCT catalyzed the Pictet–Spengler reaction involving electron-donating aldehydes in excellent yield. Thus, it has a distinct advantage over the existing methodologies where electron-donating aldehydes failed to undergo 6-endo cyclization. Our methodology provided broad substrate scope and diversity. This is indeed the first report of the use of TCT as a catalyst for the Pictet–Spengler reaction.

  9. Redox reactions in rare earth chloride molten electrolytes

    International Nuclear Information System (INIS)

    Rare earth (REM, Ln) solutions in chloride melts including MCI+LnCl3 mixtures, where M - alkali metals, were investigated by potentiometry, voltammetry, conductometry in wide concentration and temperature intervals. Findings present complete and trusty information on the valent state of rare earths, structure and composition of complex ions affecting essentially on properties of electrolytes. It is demonstrated that the coexistence of rare earth ions with different oxidation level formed as a result of possible redox reactions: 2Ln3+ + Ln ↔3Ln2+, Ln2+ + Ln↔2Ln+ and nM+ + Ln↔nM + Lnn+ appears sharply in thermodynamic and transport properties of molten Ln-LnCl3 and Ln-LnCl3-MCl systems

  10. Chrono-amperometric studies in melt alkaline nitrates and chlorides

    International Nuclear Information System (INIS)

    This research thesis proposes a large overview of the electrochemical behaviour of a number of metals and alloys in melt alkaline chlorides and nitrates at various temperatures. These salts are generally pure but, in some experiments, contain humidity or gases. The author addresses and discusses all the reactions which may occur at the electrode between the salt decomposition potentials. After having recalled and commented some definitions and fundamental principles of thermodynamics and electrochemical kinetics, presented the methods (polarization curves, measurements and additional analysis), the experimental apparatus and the reference electrodes in melt salts, the author reports the results obtained with the studied melt salts, and proposes an interpretation of Log i/U curves

  11. Applicability of certain materials and protective coatings in fused chlorides

    Energy Technology Data Exchange (ETDEWEB)

    Migai, L.L.; Verizhnikova, G.N.

    1976-09-01

    The corrosion resistance of a number of metals, alloys, ceramic materials, and enamel coatings was investigated in mixtures of fused freshly prepared chlorides at 500 to 550/sup 0/C in air. The chlorides NaCl, KCl, and CaCl/sub 2/ of cp and ar grade were dried in air at 200 to 250/sup 0/C for 6 h, remelted at 800/sup 0/C, and fused in given ratios for 3 h; anhydrous commercial MgCl/sub 2/, AlCl/sub 3/, and FeCl/sub 3/, until a homogeneous melt was obtained. The corrosion resistances of the metals and ceramic materials were assessed from the change in weight. The chemical resistance of the enamel coating were determined from the loss of continuity of the coating by means of an IDS flaw detector. The corrosion rate of W, Mo, Ni, Ta, Cr, Zr, NMZhMts (28-1.5-2), KhN4510, N50Kh40Yu10, N60KH40, OKh15N65M16G3, OKh15N65M16V, N65M20V15, N65M19V16, N70M27F, and stainless steels Kh28Yu5, Kh28S2, Kh18N10T, Kh20N18Yu3, Kh25N20S2, and OKh23N28M3D3T in melts of these compositions exceeded 100g/m/sup 2/h. Ceramic of pure oxides, silicon carbide with a nitride binder, and silicified graphite are strongly impregnated by the melt, and may therefore crack with a sudden change in temperature. Cermet coating M1 disintegrated in places. Of the cermic materials tested the most stable are basalt ceramic and fluorphlogopite. Enamel coating 6S-12 has a low resistance, the surface became rough; enamel coating 15, Kh19-6, N-14-15, and N14-10 became porous.Enamels 8/2-72, 81A/sub 8/, and 81 are quite unstable in these melts at 500 to 550/sup 0/C. Enamel coatings 143/54-15, 143/54-50, 54, and 122 are the most stable in fused chlorides. These studies showed that none of the metallic materials tested can be used as a structural material in the chloride melts (%) KCl 39, NaCl 7 CaCl/sub 2/ 3.5, MgCl/sub 2/ 2.5, AlCl/sub 3/ 20, and FeCl/sub 3/ 28 and KCL 58-FeCl/sub 3/ 42 at 500 to 550/sup 0/C. Fluorphlogopite, basalt ceramic, and enamels 143/54-15, 143/54-50, 54, and 122 are recommended for pilot

  12. Friction loss in straight pipes of unplasticized polyvinyl chloride.

    Science.gov (United States)

    Iwasaki, T; Ojima, J

    1996-01-01

    In order to design proper ductwork for a local exhaust system, airflow characteristics were investigated in straight pipes of unplasticized polyvinyl chloride (PVC). A linear decrease in static pressure was observed downstream at points from the opening of the VU pipes (JIS K 6741) located at distances greater than 10 times the pipe diameter, for velocities ranging between 10.18-36.91 m/s. Roughness inside pipes with small diameters was found to be 0.0042-0.0056 mm and the friction factor was calculated on the basis of Colebrook's equation for an airflow transition zone. An extended friction chart was then constructed on the basis of the roughness value and the friction factor. This chart can be applied when designing a local exhaust system with the ducts of diameters ranging from 40 to 900 mm. The friction loss of the PVC pipe was found to be approximately 2/3 of that of a galvanized steel pipe.

  13. Preparation and characterization of organic polymer modified composite polyaluminum chloride

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Compared with traditional aluminum salts, polyaluminum chloride (PACl) has better coagulation-flocculation performance in turbidity removal. However, it is still inferior to organic polymers in terms of bridging function. In order to improve the aggregating property of PACl, different composite PACl flocculants were prepared with various organic polymers. The effect of organic polymer on the distribution of Al (Ⅲ) species in composite flocculants was studied using 27Al NMR and Al-ferron complexation methods. The charge neutralization and surface adsorption characteristics of composite flocculants were also investigated. Jar tests were conducted to evaluate the turbidity removal efficacy of organic polymer modified composite flocculants. The study shows that cationic polymer and anionic polymer have significant influences on the coagulation-flocculation behaviors of PACl. Both cationic and anionic polymers can improve the turbidity removal performance of PACl but the mechanisms are much different: cationic organic polymer mainly increases the charge neutralization ability, but anionic polymer mainly enhances the bridging function.

  14. Friction loss in straight pipes of unplasticized polyvinyl chloride.

    Science.gov (United States)

    Iwasaki, T; Ojima, J

    1996-01-01

    In order to design proper ductwork for a local exhaust system, airflow characteristics were investigated in straight pipes of unplasticized polyvinyl chloride (PVC). A linear decrease in static pressure was observed downstream at points from the opening of the VU pipes (JIS K 6741) located at distances greater than 10 times the pipe diameter, for velocities ranging between 10.18-36.91 m/s. Roughness inside pipes with small diameters was found to be 0.0042-0.0056 mm and the friction factor was calculated on the basis of Colebrook's equation for an airflow transition zone. An extended friction chart was then constructed on the basis of the roughness value and the friction factor. This chart can be applied when designing a local exhaust system with the ducts of diameters ranging from 40 to 900 mm. The friction loss of the PVC pipe was found to be approximately 2/3 of that of a galvanized steel pipe. PMID:8768669

  15. Influence of sodium chloride on the crystallization rate of gypsum

    Energy Technology Data Exchange (ETDEWEB)

    Brandse, W.P. (Univ. of Technology, Delft, Netherlands); van Rosmalen, G.M.; Brouwer, G.

    1977-01-01

    The growth kinetics of gypsum was studied in supersaturated solutions both in pure water and in the presence of NaCl, using a seeded growth technique. Radioactive tracer techniques were employed to follow the growth process. The mean linear growth rate R was plotted against the relative supersaturation sigma. For low sigma values the relation between R and sigma is given by a linear law, for higher sigma values by a parabolic law and for the highest sigma values by a growth ''order'' higher than two. It was shown that the addition of sodium chloride increased the crystallization rate remarkably. The higher the NaCl concentration the higher the growth rate.

  16. Nickel electrodeposition from leaching solution containing ammonia and chloride

    Institute of Scientific and Technical Information of China (English)

    郑国渠; 郑利峰; 曹华珍; 高志峰; 倪似愚; 张九渊

    2003-01-01

    The effects of temperature, nickel concentration and current density on the current efficiency and the e-lectrolyzer voltage were investigated in the process of electrowinning nickel. The results show that the current effi-ciency is above 90 % under the various experimental conditions, and the electrolyzer voltage is less than that of tradi-tional electrolyzer system. Therefore, the optimized parameters, i.e. temperature of 50 C, current density of 400A/m2 , are determined. It is also elucidated that anodic product is high valent nickel compound in the process of elec-trodeposition in terms of X-ray diffraction and chemical analysis. The amount of solid product formed on the elec-trode surface decreases with an increase in ammonium chloride concentration by cyclic voltammetry analysis. It is al-so indicated that the anodic gas species are mainly composed of nitrogen by vapor phase chromatograph.

  17. Thermodynamic properties of pentalead tris(vanadate) chloride

    Energy Technology Data Exchange (ETDEWEB)

    Knyazev, A.V., E-mail: knyazevav@gmail.com [Nizhny Novgorod State University, Gagarin Prospekt 23/2, Nizhny Novgorod 603950 (Russian Federation); Bulanov, E.N.; Smirnova, N.N.; Kuznetsova, N.Yu.; Letyanina, I.A.; Pryamova, E.D. [Nizhny Novgorod State University, Gagarin Prospekt 23/2, Nizhny Novgorod 603950 (Russian Federation)

    2011-03-10

    Graphical abstract: - Abstract: In the present work the temperature dependences of pentalead tris(vanadate) chloride heat capacity have been measured for the first time in the range from 7 to 350 K. The experimental data were used to calculate standard thermodynamic functions, namely the heat capacity C{sub p} {sup o} (T), enthalpy H{sup o}(T) - H{sup o}(0), entropy S{sup o}(T) - S{sup o}(0) and Gibbs function G{sup o}(T) - H{sup o}(0), for the range from T {yields} 0 to 350 K. The differential scanning calorimetry in temperature interval 298-1473 K was applied to measure temperatures of phase transition and melting of compound under study. The high-temperature X-ray diffraction in range 298-1073 K was used for the determining thermal expansion coefficients.

  18. Sodium Chloride Dihydrate - A Potential Cause of Slippery Accidents

    DEFF Research Database (Denmark)

    Mejlholm, Morten; Thomsen, Kaj; Rasmussen, Peter;

    of ice appearing to be resistant to road salt, a comparative study has been made on a number of different surfaces measuring the friction index. The friction measurements were performed with a Portable Skid-Resistance Tester. Discontinuous surfaces consisting of small islands of hydrohalite...... was classified as potentially slippery surfaces. It is therefore possible that the formation of hydrohalite contributes to accidents on slippery roads.......From a thermodynamic point of view, it can be expected that sodium chloride dihydrate (hydrohalite, NaCl2H2O) will form on winter roads under certain conditions at temperatures below 0.1¢®C. In order to elucidate whether or not the formation of hydrohalite on the pavement can explain the phenomenon...

  19. The Influence of Additives on Crystallization of Polyvinyl Chloride

    Institute of Scientific and Technical Information of China (English)

    LIU Yaqun; ZHANG Chaocan

    2007-01-01

    Acetanilide, adipic acid and potassium hydrogen phthalate were chosen as nucleating agents of polyvinyl chloride(PVC), and their effects on PVC crystallization were studied by differential scanning calorimetry, wide angle X-ray diffraction and fourier transform infrared spectroscopy. The experimental results indicate that all of the three additives are compatible with PVC to some extent, but adipic acid's compatibility with PVC is less satisfactory. The three additives can improve PVC crystallinity, and acetanilide can decrease PVC glass transition temperature(Tg)and narrow PVC melting range, while adipic acid and potassium hydrogen phthalate rise Tg of PVC and widen its melting range. All additives do not affect PVC crystal system and all samples are in orthorhombic system. All additives can improve (200), (110), (210) and (201, 111) planes growing. Moreover, acetanilide and adipic acid can shrink PVC spacings and improve the crystal perfection of PVC, but potassium hydrogen phthalate swells spacings and reduces the perfection of PVC crystal.

  20. Reactivity Ratios of Diethyldiallylammonium Chloride with Acrylamide or Acrylic Acid

    Institute of Scientific and Technical Information of China (English)

    Li Hua LIU; Zhi Qiang LIU; Zhu Qing GONG

    2006-01-01

    The compositions of copolymers of diethyldiallylammonium chloride (DEDAAC) with acrylamide (AM), acrylic acid (AA) or sodium acrylic acid (NaAA) at low conversion were determined by elemental analysis, and the reactivity ratios of monomers in copolymerization were obtained by Kelen-Tudos method. The results showed that the reactivity ratios rDE and rAM are 0.31 and 5.27 for DEDAAC with AM, rDE and rAA are 0.28 and 5.15 for DEDAAC with AA, and rDE and rNaAA are 0.40 and 3.97 for DEDAAC with NaAA, respectively. The copolymerizations for DEDAAC with AM, AA or NaAA are non-ideal copolymerization and the products are random copolymers.

  1. Hibiscus sabdariffa Affects Ammonium Chloride-Induced Hyperammonemic Rats

    Directory of Open Access Journals (Sweden)

    M. Mohamed Essa

    2007-01-01

    Full Text Available Hibiscus sabdariffa (HS is an edible medicinal plant, indigenous to India, China and Thailand and is used in Ayurveda and traditional medicine. Alcoholic extract of HS leaves (HSEt was studied for its anti-hyperammonemic and antioxidant effects in brain tissues of ammonium chloride-induced hyperammonemic rats. Oral administration of HSEt (250 mg kg−1 body weight significantly normalizes the levels of ammonia, urea, uric acid, creatinine and non-protein nitrogen in the blood. HSEt significantly reduced brain levels of lipid peroxidation products such as thiobarbituric acid and reactive substances (TBARS and hydroperoxides (HP. However, the administered extract significantly increased the levels of antioxidants such as catalase (CAT, superoxide dismutase (SOD, glutathione peroxidase (GPx and reduced glutathione (GSH in brain tissues of hyperammonemic rats. This investigation demonstrates significant anti-hyperammonemic and antioxidant activity of HS.

  2. Strong and specific effects of cations on lysozyme chloride solubility.

    Science.gov (United States)

    Bénas, Philippe; Legrand, Laurent; Riès-Kautt, Madeleine

    2002-10-01

    The influence of salt nature and concentration on tetragonal lysozyme chloride crystal solubility is presented for a set of mono-, di- and trivalent cations (Cs(+), Rb(+), Mn(2+), Co(2+) and Yb(3+)). The results show that cations have as strong an effect on protein solubility as anions and that they present their own particular effects as co-ions. Indeed, after decreasing at low ionic strength, lysozyme solubility increases with high concentration of polyvalent cations, probably due to co-ion binding and therefore the concomitant increase of the net charge of the protein-salt complex. These new results are discussed in order to progress in the understanding of the crystallisation process at the atomic level. PMID:12351866

  3. Sodium Chloride, NaCl/ϵ: New Force Field.

    Science.gov (United States)

    Fuentes-Azcatl, Raúl; Barbosa, Marcia C

    2016-03-10

    A new computational model for sodium chloride, the NaCl/ϵ, is proposed. The force field employed for the description of the NaCl is based on a set of radial particle-particle pair potentials involving Lennard-Jones (LJ) and Coulombic forces. The parametrization is obtained by fitting the density of the crystal and the density and the dielectric constant of the mixture of the salt with water at a diluted solution. Our model shows good agreement with the experimental values for the density and for the surface tension of the pure system, and for the density, the viscosity, the diffusion, and the dielectric constant for the mixture with water at various molal concentrations. The NaCl/ϵ together with the water TIP4P/ϵ models provide a good approximation for studying electrolyte solutions. PMID:26890321

  4. Biotransformation of Tributyltin chloride by Pseudomonas stutzeri strain DN2

    Directory of Open Access Journals (Sweden)

    Dnyanada S. Khanolkar

    2014-12-01

    Full Text Available A bacterial isolate capable of utilizing tributyltin chloride (TBTCl as sole carbon source was isolated from estuarine sediments of west coast of India and identified as Pseudomonas stutzeri based on biochemical tests and Fatty acid methyl ester (FAME analysis. This isolate was designated as strain DN2. Although this bacterial isolate could resist up to 3 mM TBTCl level, it showed maximum growth at 2 mM TBTCl in mineral salt medium (MSM. Pseudomonas stutzeri DN2 exposed to 2 mM TBTCl revealed significant alteration in cell morphology as elongation and shrinkage in cell size along with roughness of cell surface. FTIR and NMR analysis of TBTCl degradation product extracted using chloroform and purified using column chromatography clearly revealed biotransformation of TBTCl into Dibutyltin dichloride (DBTCl2 through debutylation process. Therefore, Pseudomonas stutzeri strain DN2 may be used as a potential bacterial strain for bioremediation of TBTCl contaminated aquatic environmental sites.

  5. Corrosion of LY12 aluminum alloy in sodium chloride solution

    Institute of Scientific and Technical Information of China (English)

    程英亮; 张昭; 曹发和; 李劲风; 张鉴清; 王建明; 曹楚南

    2003-01-01

    The corrosion behavior of LY12 alloy in sodium chloride solution and its electrochemical noise were reported. The development of the micro-pits on the alloy surface was monitored by scanning electron microscopy, scanning tunneling microscopy, and electrochemical noise method. All the measurements show that the corrosion of LY12 alloy can be divided into two stages: a very reactive initial stage and a relative constant stable stage. The initial stage is corresponded to the adsorption of Cl ions and its reaction with the oxide film and the dissolution of Mg containing particles. The stable stage is corresponded to the development of the micro-pits by the galvanic attack formed by Al-Fe-Cu-Mn containing particles and the matrix. The initial stage lasts about 2-3 h while the stable stage dominates the whole corrosion process.

  6. Sulfonated polyvinyl chloride fibers for cation-exchange microextraction.

    Science.gov (United States)

    Xu, Li; Lee, Hian Kee

    2009-09-18

    Polyvinyl chloride (PVC) fiber was derivatized by concentrated sulfuric acid to yield sulfonated PVC (PVC-SO3H). The PVC-SO3H fiber had dual properties as a sorbent, based on cation-exchange and hydrophobicity. In the present study, the novel fiber was used directly as an individual device for extraction purposes in the cation-exchange microextraction of anaesthetics, followed by high-performance liquid chromatography-UV analysis. The results demonstrated that this PVC-SO3H fiber-based microextraction afforded convenient operation and cost-effective application to basic analytes. The limits of detection for four anaesthetics ranged from 1.2 to 6.0 ng/mL. No carryover (because of its disposable usage), and no loss of sorbent phase (which normally occurs in stir-bar sorptive extraction) during extraction were observed.

  7. [Test method for 6 phthalates in polyvinyl chloride].

    Science.gov (United States)

    Abe, Yutaka; Mutsuga, Motoh; Hirahara, Yoshichika; Kawamura, Yoko

    2011-01-01

    A test method for 6 phthalates, bis(2-ethylhexyl)phthalate, dibutyl phthalate, benzyl butyl phthalate, diisononyl phthalate, diisodecyl phthalate and di-n-octyl phthalate, in polyvinyl chloride (PVC) was developed. GC/MS was used in the SIM mode for the separation and detection of phthalates. For preparation of the test solution, the extraction method with acetone-hexane mixture (3 : 7) and the dissolution method with tetrahydrofuran and ethanol were compared and it was confirmed that each method gave good recoveries. Dilution of the test solution was effective to reduce the influence of PVC. In a collaborative study with nine laboratories, the intra-laboratory variations showed good repeatability, but the measurements at some laboratories deviated widely. It appears that this method is unsuitable for the judgment of acceptability, but it may be suitable for the determination of phthalate content in PVC products.

  8. Electrochemical impedance spectroscopy study on corrosion inhibition of benzyltriethylammonium chloride

    Science.gov (United States)

    Idris, Mohd Nazri; Daud, Abdul Razak; Othman, Norinsan Kamil

    2013-11-01

    Electrochemical Impedance Spectroscopy (EIS) was employed to study the corrosion inhibition behavior of benzyltriethylammonium chloride (BTC) for carbon steel corrosion. The inhibition efficiency was investigated in 1.0 M HCl solution at room temperature (25°C) by varying the BTC concentration. EIS results indicated that the double layer capacitance of electrolyte/carbon steel interface decreases with the increasing of BTC concentration and consequently enhances the polarization resistance of equivalence Randles circuit. The results indicated that inhibition efficiency of as high as 65% could be achieved when 10mM BTC was present in 1.0 M HCl solution as compared to inhibitor-free solution. The inhibition process of BTC on the carbon steel corrosion was found to obey Langmuir adsorption isotherm. This study revealed that BTC is suitable to be used as a corrosion inhibitor in acid media.

  9. Fast reactors using molten chloride salts as fuel

    International Nuclear Information System (INIS)

    This report deals with a rather exotic ''paper reactor'' in which the fuel is in the form of molten chlorides. (a) Fast breeder reactor with a mixed fuel cycle of thorium/uranium-233 and uranium 238/plutonium in which all of the plutonium can be burned in situ and in which a denatured mixture of uranium-233 and uranium-238 is used to supply further reactors. The breeding ratio is relatively high, 1.58 and the specific power is 0.75 GW(th)/m3 of core. (b) Fast breeder reactor with two and three zones (internal fertile zone, intermediate fuel zone, external fertile zone) with an extremely high breeding ratio of 1.75 and a specific power of 1.1 GW(th)/m3 of core. (c) Extremely high flux reactor for the transmutation of the fission products: strontium-90 and caesium-137. The efficiency of transmutation is approximately 15 times greater than the spontaneous beta decay. This high flux burner reactor is intended as part of a complex breeder/burner system. (d) Internally cooled fast breeder in which the cooling agent is the molten fertile material, the same as in the blanket zone. This reactor has a moderate breeding ratio of 1.38, a specific power of 0.22 GW(th)/m3 of core and very good inherent safety properties. All of these reactors have the fuel in the form of molten chlorides: PuCl3 as fissile, UCl3 as fertile (if needed) and NaCl as dilutent. The fertile material can be 238UCl3 as fertile and NaCl as dilutent. In mixed fuel cycles the 233UCl3 is also a fissile component with 232ThCl4 as the fertile constituent

  10. [Polymethoxylated flavonoids activate cystic fibrosis transmembrane conductance regulator chloride channel].

    Science.gov (United States)

    Cao, Huan-Huan; Fang, Fang; Yu, Bo; Luan, Jian; Jiang, Yu; Yang, Hong

    2015-04-25

    Cystic fibrosis transmembrane conductance regulator (CFTR), a cAMP-dependent chloride channel, plays key roles in fluid secretion in serous epithelial cells. Previously, we identified two polymethoxylated flavonoids, 3',4',5,5',6,7-hexamethoxyflavone (HMF) and 5-hydroxy-6,7,3',4'-tetramethoxyflavone (HTF) which could potentiate CFTR chloride channel activities. The present study was aimed to investigate the potentiation effects of HMF and HTF on CFTR Cl(-) channel activities by using a cell-based fluorescence assay and the short circuit Ussing chamber assay. The results of cell-based fluorescence assay showed that both HMF and HTF could dose-dependently potentiate CFTR Cl(-) channel activities in rapid and reversible ways, and the activations could be reversed by the CFTR blocker CFTRinh-172. Notably, HMF showed the highest affinity (EC50 = 2 μmol/L) to CFTR protein among the flavonoid CFTR activators identified so far. The activation of CFTR by HMF or HTF was forskolin (FSK) dependent. Both compounds showed additive effect with FSK and 3-Isobutyl-1-methylx (IBMX) in the activation of CFTR, while had no additive effect with genistein (GEN). In ex vivo studies, HMF and HTF could stimulate transepithelial Cl(-) secretion in rat colonic mucosa and enhance fluid secretion in mouse trachea submucosal glands. These results suggest that HMF and HTF may potentiate CFTR Cl(-) channel activities through both elevation of cAMP level and binding to CFTR protein pathways. The results provide new clues in elucidating structure and activity relationship of flavonoid CFTR activators. HMF might be developed as a new drug in the therapy of CFTR-related diseases such as bronchiectasis and habitual constipation. PMID:25896054

  11. Effect of kaolin treatment temperature on mortar chloride permeability

    Directory of Open Access Journals (Sweden)

    Puertas, F.

    2007-03-01

    Full Text Available The present paper discusses the results of chloride resistance tests conducted on ordinary Portland cement (OPC mortars containing a Colombian kaolin pre-treated at temperatures of from 600 to 800 ºC. The resulting metakaolin (MK was added to OPC mortar mixes in proportions of 10 and 20% by cement weight. The mortars were compared for physical and chemical properties, including capillary absorption, chloride permeability and pore microstructure as assessed by mercury porosimetry. The best performance was recorded for the samples containing 20% of the material treated at 800 ºC.En el presente trabajo se incluyen los resultados de la resistencia a la penetración de cloruros de morteros de Cemento Portland Ordinario (OPC adicionados con un caolín colombiano sometido a tratamiento térmico en un rango de temperaturas entre 600 y 800 °C. Los productos del tratamiento térmico, metacaolín (MK, son incorporados en mezclas de morteros de OPC en proporciones del 10 y 20% en relación al peso del cemento. Se comparan sus características físico-químicas, entre las cuales se incluye la microestructura de poros evaluada por la técnica de porosimetría de mercurio, con la absorción capilar y la permeabilidad a cloruros. Se concluye que las muestras adicionadas con un 20% del material tratado térmicamente a 800 °C presentan el mejor desempeño en sus propiedades finales.

  12. Treatment of Highly Turbid Water by Polyaluminum Ferric Chloride (PAFCL

    Directory of Open Access Journals (Sweden)

    Fazel Fazel Mohammadi-Moghaddam

    2015-10-01

    Full Text Available Background & Aims of the Study: In some situation like rainfall seasons raw water become very turbid so it affected the water treatment plant processes and quality of produced water. Treatment of very high turbid water has some concerns like precursors for disinfection by-products and very loading rate of particle on filter's media and consequently increases in water consumption for filter backwash. This paper investigates the performance of a composite inorganic polymer of aluminium and ferric salt, Polyaluminium ferric chloride (PAFCl, for the removal of turbidity, color and natural organic matter (NOM from high turbid water. Materials and Methods: Experiments were carried out by Jar test experiment by synthetic water samples with 250 and 500 NTU turbidity that prepared in laboratory. Results: The results of conventional jar test showed that the optimum pH for coagulation of water sample was 7.5 to 8 and optimum dosage of the coagulant was 10 mg/L. Removal efficiency of turbidity, color and UV adsorbent at 254 nm at optimum dose and pH without filtration was 99.92%, 100% and 80.6% respectively for first sample (250 NTU and 99.95%, 99.49% and 84.77 for second sample (500 NTU respectively. Conclusion: It concluded that polyaluminium ferric chloride has a very good efficiency for the removal of turbidity, color and organic matter in high turbid water. Also it can be select as a coagulant for high turbid water and some waste water from water treatment plant like filter backwash water.

  13. Iron-Catalyzed Acylation of Polyfunctionalized Aryl- and Benzylzinc Halides with Acid Chlorides.

    Science.gov (United States)

    Benischke, Andreas D; Leroux, Marcel; Knoll, Irina; Knochel, Paul

    2016-08-01

    FeCl2 (5 mol %) catalyzes a smooth and convenient acylation of functionalized arylzinc halides at 50 °C (2-4 h) and benzylic zinc chlorides at 25 °C (0.5-4 h) with a variety of acid chlorides leading to polyfunctionalized diaryl and aryl heteroaryl ketones. PMID:27457108

  14. Simulation of Chloride Diffusion in Cracked Concrete with Different Crack Patterns

    Directory of Open Access Journals (Sweden)

    Xiao-Yong Wang

    2016-01-01

    Full Text Available Chloride-induced corrosion of steel rebar is one of the primary durability problems for reinforced concrete structures in marine environment. Furthermore, if the surfaces of concrete structures have cracks, additional chloride can penetrate into concrete through cracked zone. For chloride ingression into cracked concrete, former researches mainly focus on influence of crack width on chloride diffusion coefficients. Other crack characteristics, such as chloride depth, crack shape (equal-width crack or tapered crack, crack density, and spacing, are not studied in detail. To fill this gap, this paper presents a numerical procedure to simulate chloride ingression into cracked concrete with different crack geometry characteristics. Cracked concrete is divided into two parts, sound zone and cracked zone. For stress-free concrete, the diffusion coefficient of sound zone is approximately assumed to be the same as sound concrete, and the diffusion coefficient of cracked zone is expressed as a piecewise function of crack width. Two-dimensional finite element method is used to determine chloride concentration. It is found that, with the increasing of crack width, crack depth, and crack amount, chloride ingression will aggravate. The analysis results generally agree with experimental results.

  15. The LB Films of Dansyl Chloride Labeled Octadecylamine and Its Fluorescence Lifetime

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Octadecylamine was derivatized with dansyl chloride (5-dimethylaminonaphthalene-1-sulfonyl chloride) in order to simplify and understand the LB films of fluorescent probe labeling proteins.Its monolayer and multilayers in the absence and presence of stearic acid were deposited by LB technique.Fluorescence spectra and lifetimes of the fluorescent products were studied to elucidate the microenvironment of molecules in the LB films.

  16. Oxidative addition of aryl chlorides to monoligated palladium(0): A DFT-SCRF study

    DEFF Research Database (Denmark)

    Ahlquist, Mårten Sten Gösta; Norrby, Per-Ola

    2007-01-01

    Oxidative addition of aryl chlorides to palladium has been investigated by hybrid density functional theory methods (B3LYP), including a continuum model describing the solvent implicitly. A series of para-substituted aryl chlorides were studied to see the influence of electronic effects on the...

  17. Mechanism of sodium chloride in promoting reduction of high-magnesium low-nickel oxide ore.

    Science.gov (United States)

    Zhou, Shiwei; Wei, Yonggang; Li, Bo; Wang, Hua; Ma, Baozhong; Wang, Chengyan

    2016-01-01

    Sodium chloride has been proved that it is an effective promoter for the reduction of high-magnesium, low-nickel oxide ore. The aim of current work is to clarify the promotion behavior of sodium chloride in the roasting reduction process. The influence of moisture on the reduction of ore in the presence of sodium chloride is studied to get clear comprehension of promotion process. In the presence of moisture, the HCl is produced by pyrohydrolysis of sodium chloride for chlorinating nickel and iron oxides, moreover, interactions between metallic oxides and sodium chloride are also a way for chlorination at high temperature (>802 °C); subsequently, the metal chloride would be reduced by reductant. In the absence of moisture, the magnetic separation results show that the recoveries of iron and nickel have a significant increase; moreover, olivine structure would be destroyed gradually with the increase of roasting temperature in the action of sodium chloride, and the sodium chloride existed in high-magnesium, low-nickel oxide ore could make the NiO isolate from NiO-bearing minerals. The NiO reacts with Fe2O3 at high temperature to form NiFe2O4, which is conductive to the formation of Ni-Fe alloy during the reduction process. PMID:27374991

  18. Sythesis of rare earth metal - GIC graphite intercalation compound in molten chloride system

    Energy Technology Data Exchange (ETDEWEB)

    Ito, Masafumi; Hagiwara, Rika; Ito, Yasuhiko [Kyoto Univ. (Japan). Faculty of Engineering

    1994-07-01

    Graphite intercalation compounds of ytterbium and neodymium have been prepared by interacting graphite and metals in molten chlorides. These rare earth metals can be suspended in molten chlorides in the presence of trichlorides via disproportionation reaction RE(0) + RE(III) = 2RE(II) at lower than 300 degC. Carbides-free compounds are obtained in these systems. (author).

  19. Chloride Ion Transport in Fly Ash Mortar under Action of Fatigue Loading

    Institute of Scientific and Technical Information of China (English)

    WANG Caihui; SUN Wei; JIANG Jinyang

    2012-01-01

    In order to study the chloride ion transport performance in fly ash addition mortar,a new method,in which the fatigue loading and chloride diffusion are undertaken simultaneously,was developed.This method realizes coupling the fatigue damage process and the process of chloride transporting of fly ash mortar.The transport performance of chloride in fly ash mortar specimens was studied under different stress levels.Moreover,the effect of fly ash content on transport performance of chloride ion in mortar was investigated.AE (Acoustic Emission) and SEM were used to acquire the damage distribution of mortar specimens under action of fatigue load.The results show that the diffusion coefficient of chloride in mortar specimens increases with stress level of fatigue loading.The addition of fly ash can mitigate the penetration of chloride ion.The results of microcrack 3D location acquired by AE,accompanied with crack characterizing from SEM,indicate that the damage degree of mortar specimen increases with stress level of fatigue loading.Furthermore,higher damage degree of mortar leads to more the chloride ion content in the sample.

  20. Manipulation of a Schlenk Line: Preparation of Tetrahydrofuran Complexes of Transition-Metal Chlorides

    Science.gov (United States)

    Davis, Craig M.; Curran, Kelly A.

    2007-01-01

    Before taking an inorganic laboratory course few students have experience handling air-sensitive materials using Schlenk techniques. This exercise introduces them to techniques they will employ in later syntheses. The procedure involves the formation of anhydrous tetrahydrofuran complexes of transition-metal chlorides from metal-chloride hydrates;…

  1. 21 CFR 177.2000 - Vinylidene chloride/methyl acrylate/methyl methacrylate polymers.

    Science.gov (United States)

    2010-04-01

    ... methacrylate polymers. 177.2000 Section 177.2000 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF...: POLYMERS Substances for Use as Basic Components of Single and Repeated Use Food Contact Surfaces § 177.2000 Vinylidene chloride/methyl acrylate/methyl methacrylate polymers. The vinylidene chloride/methyl...

  2. Electrochemical chloride ion detection technique by using Pt electrode in high temperature water

    International Nuclear Information System (INIS)

    Chloride ion is a representative chemical species causing the corrosion failure of structural materials. For detecting chloride ions in a high temperature solution, the potentio-dynamic polarization and potential transient technique were performed with a Pt electrode. From the polarization behaviour, it was recognized that there is a potential region forming a stable Pt oxide layer to blockade the oxidation reaction of dissolved hydrogen. Since the presence of chloride ions affect the growth of an oxide layer on the metal surface, the potential transient technique was used to investigate the interference of chloride ions for formation of the Pt oxide layer by repeating apply the potential between oxide-free and oxide forming potentials. As a result, the initial oxidation current of dissolved hydrogen appeared to increase with an increase in the chloride ion concentration of the test solutions, and the time for reaching the limiting oxidation current was delayed. From the oxidation current of dissolved hydrogen, we could detect chloride ions down to 2.8 x 10-5 M in high temperature solutions. Consequently, the oxidation current of dissolved hydrogen could be an indicator of chloride ions, because the formation of the Pt oxide layer is sensitively interfered with the chloride ions. (authors)

  3. Mechanism of sodium chloride in promoting reduction of high-magnesium low-nickel oxide ore

    Science.gov (United States)

    Zhou, Shiwei; Wei, Yonggang; Li, Bo; Wang, Hua; Ma, Baozhong; Wang, Chengyan

    2016-07-01

    Sodium chloride has been proved that it is an effective promoter for the reduction of high-magnesium, low-nickel oxide ore. The aim of current work is to clarify the promotion behavior of sodium chloride in the roasting reduction process. The influence of moisture on the reduction of ore in the presence of sodium chloride is studied to get clear comprehension of promotion process. In the presence of moisture, the HCl is produced by pyrohydrolysis of sodium chloride for chlorinating nickel and iron oxides, moreover, interactions between metallic oxides and sodium chloride are also a way for chlorination at high temperature (>802 °C) subsequently, the metal chloride would be reduced by reductant. In the absence of moisture, the magnetic separation results show that the recoveries of iron and nickel have a significant increase; moreover, olivine structure would be destroyed gradually with the increase of roasting temperature in the action of sodium chloride, and the sodium chloride existed in high-magnesium, low-nickel oxide ore could make the NiO isolate from NiO-bearing minerals. The NiO reacts with Fe2O3 at high temperature to form NiFe2O4, which is conductive to the formation of Ni-Fe alloy during the reduction process.

  4. 21 CFR 700.19 - Use of methylene chloride as an ingredient of cosmetic products.

    Science.gov (United States)

    2010-04-01

    ... cosmetic products. 700.19 Section 700.19 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) COSMETICS GENERAL Requirements for Specific Cosmetic Products § 700.19 Use of methylene chloride as an ingredient of cosmetic products. (a) Methylene chloride has been...

  5. Relating road salt to exceedances of the water quality standard for chloride in New Hampshire streams.

    Science.gov (United States)

    Trowbridge, Philip R; Kahl, J Steve; Sassan, Dari A; Heath, Douglas L; Walsh, Edward M

    2010-07-01

    Six watersheds in New Hampshire were studied to determine the effects of road salt on stream water quality. Specific conductance in streams was monitored every 15 min for one year using dataloggers. Chloride concentrations were calculated from specific conductance using empirical relationships. Stream chloride concentrations were directly correlated with development in the watersheds and were inversely related to streamflow. Exceedances of the EPA water quality standard for chloride were detected in the four watersheds with the most development. The number of exceedances during a year was linearly related to the annual average concentration of chloride. Exceedances of the water quality standard were not predicted for streams with annual average concentrations less than 102 mg L(-1). Chloride was imported into three of the watersheds at rates ranging from 45 to 98 Mg Cl km(-2) yr(-1). Ninety-one percent of the chloride imported was road salt for deicing roadways and parking lots. A simple, mass balance equation was shown to predict annual average chloride concentrations from streamflow and chloride import rates to the watershed. This equation, combined with the apparent threshold for exceedances of the water quality standard, can be used for screening-level TMDLs for road salt in impaired watersheds.

  6. SUBACUTE HEMATOLOGICAL RESPONSES OF THE YUCATAN SAILFIN MOLLY (POECILIA VELIFERA) EXPOSED TO CADMIUM CHLORIDE

    Science.gov (United States)

    This study focuses on the subacute hematological responses of the Yucatan sailfin molly, Poecilia velifera, exposed to cadmium chloride. Previous studies in other teleosts and mammals have suggested that exposure to cadmium chloride results in a leucocytic response. Fish were exp...

  7. SUBACTUTE HEMATOLOGICAL RESPONSES OF THE YUCATAN SAILFIN MOLLY (POECILIA VELIFERA) EXPOSED TO CADMIUM CHLORIDE

    Science.gov (United States)

    This study focuses on the subacute hematological responses of the Yucatan sailfin molly, Poecilia velifera, exposed to cadmium chloride. Previous studies in other teleosts and mammals have suggested that exposure to cadmium chloride results in a leucocytic response. Fish were exp...

  8. Resistance of Alkali-Activated Slag Concrete to Chloride-Induced Corrosion

    Directory of Open Access Journals (Sweden)

    Joon Woo Park

    2015-01-01

    Full Text Available The corrosion resistance of steel in alkali-activated slag (AAS mortar was evaluated by a monitoring of the galvanic current and half-cell potential with time against a chloride-contaminated environment. For chloride transport, rapid chloride penetration test was performed, and chloride binding capacity of AAS was evaluated at a given chloride. The mortar/paste specimens were manufactured with ground granulated blast-furnace slag, instead of Portland cement, and alkali activators were added in mixing water, including Ca(OH2, KOH and NaOH, to activate hydration process. As a result, it was found that the corrosion behavior was strongly dependent on the type of alkali activator: the AAS containing the Ca(OH2 activator was the most passive in monitoring of the galvanic corrosion and half-cell potential, while KOH, and NaOH activators indicated a similar level of corrosion to Portland cement mortar (control. Despite a lower binding of chloride ions in the paste, the AAS had quite a higher resistance to chloride transport in rapid chloride penetration, presumably due to the lower level of capillary pores, which was ensured by the pore distribution of AAS mortar in mercury intrusion porosimetry.

  9. Dietary Impact of Adding Potassium Chloride to Foods as a Sodium Reduction Technique

    Directory of Open Access Journals (Sweden)

    Leo van Buren

    2016-04-01

    Full Text Available Potassium chloride is a leading reformulation technology for reducing sodium in food products. As, globally, sodium intake exceeds guidelines, this technology is beneficial; however, its potential impact on potassium intake is unknown. Therefore, a modeling study was conducted using Dutch National Food Survey data to examine the dietary impact of reformulation (n = 2106. Product-specific sodium criteria, to enable a maximum daily sodium chloride intake of 5 grams/day, were applied to all foods consumed in the survey. The impact of replacing 20%, 50% and 100% of sodium chloride from each product with potassium chloride was modeled. At baseline median, potassium intake was 3334 mg/day. An increase in the median intake of potassium of 453 mg/day was seen when a 20% replacement was applied, 674 mg/day with a 50% replacement scenario and 733 mg/day with a 100% replacement scenario. Reformulation had the largest impact on: bread, processed fruit and vegetables, snacks and processed meat. Replacement of sodium chloride by potassium chloride, particularly in key contributing product groups, would result in better compliance to potassium intake guidelines (3510 mg/day. Moreover, it could be considered safe for the general adult population, as intake remains compliant with EFSA guidelines. Based on current modeling potassium chloride presents as a valuable, safe replacer for sodium chloride in food products.

  10. Electrochemical activity of heavy metal oxides in the process of chloride induced corrosion of steel reinforcement

    Indian Academy of Sciences (India)

    V Živica

    2002-10-01

    The influence of heavy metal oxides on the chloride induced corrosion of steel reinforcement in concrete was studied. Significant inhibition and stimulation of chloride induced corrosion have been observed. Basicity and acidity of the relevant metal ions, and their ability to form complexes are considered as the main factors of the observed effects.

  11. Tumor regression of multiple bone metastases from breast cancer after administration of strontium-89 chloride (Metastron)

    International Nuclear Information System (INIS)

    We report a case of tumor regression of multiple bone metastases from breast carcinoma after administration of strontium-89 chloride. This case suggests that strontium-89 chloride can not only relieve bone metastases pain not responsive to analgesics, but may also have a tumoricidal effect on bone metastases

  12. Mechanism of sodium chloride in promoting reduction of high-magnesium low-nickel oxide ore.

    Science.gov (United States)

    Zhou, Shiwei; Wei, Yonggang; Li, Bo; Wang, Hua; Ma, Baozhong; Wang, Chengyan

    2016-01-01

    Sodium chloride has been proved that it is an effective promoter for the reduction of high-magnesium, low-nickel oxide ore. The aim of current work is to clarify the promotion behavior of sodium chloride in the roasting reduction process. The influence of moisture on the reduction of ore in the presence of sodium chloride is studied to get clear comprehension of promotion process. In the presence of moisture, the HCl is produced by pyrohydrolysis of sodium chloride for chlorinating nickel and iron oxides, moreover, interactions between metallic oxides and sodium chloride are also a way for chlorination at high temperature (>802 °C); subsequently, the metal chloride would be reduced by reductant. In the absence of moisture, the magnetic separation results show that the recoveries of iron and nickel have a significant increase; moreover, olivine structure would be destroyed gradually with the increase of roasting temperature in the action of sodium chloride, and the sodium chloride existed in high-magnesium, low-nickel oxide ore could make the NiO isolate from NiO-bearing minerals. The NiO reacts with Fe2O3 at high temperature to form NiFe2O4, which is conductive to the formation of Ni-Fe alloy during the reduction process.

  13. Synthesis of phosphorus-containing polyoxamacrocycles with one to two reactive thiophosphoryl chloride groups

    Institute of Scientific and Technical Information of China (English)

    Xiao Mei Zhang; Dao Quan Wang; Wan Yi Chen

    2008-01-01

    Novel phosphorus-containing polyoxamacrocycles with one to two reactive thiophosphoryl chloride groups 5, 6, 7, 8 weresynthesized from bishydroxyl compounds 1, 2, 3, 4 and thiophosphoryl chloride respectively. Their structures were confirmed by 1HNMR, 13C NMR, 31p NMR and elemental analysis.2008 Dan Quan Wang. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.

  14. The influence of polyvinyl chloride (P.V.C.) tubing on the isolated perfused rat heart

    NARCIS (Netherlands)

    Meijler, F.L.; Willebrands, A.F.; Durrer, D.

    1960-01-01

    Some brands of polyvinyl chlorides interfere with cardiac contraction, whereas other brands do not. Chemical investigation showed that the stabilizer is most probably responsibie for the cardiotoxic effect. It is suggested that all types of polyvinyl chloride used for medical and biological applica

  15. De invloed van plastic (polyvinyl-chloride) op het geïsoleerde overlevende rattehart

    NARCIS (Netherlands)

    Meijler, F.L.; Willebrands, A.F.; Durrer, D.

    1959-01-01

    Sommige soorten plastic(polyvinyl-chloride)slang doen de mechanische activiteit van het overlevende, geïsoleerde rattehart verminderen, of verdwijnen. Dit polyvinyl-chloride wordt verkocht en gebruikt voor medische en biologische doeleinden. Chemische analyses toonden een duidelijk verschil tussen d

  16. 21 CFR 175.365 - Vinylidene chloride copolymer coatings for polycarbonate film.

    Science.gov (United States)

    2010-04-01

    ... polycarbonate film. 175.365 Section 175.365 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH... chloride copolymer coatings for polycarbonate film. Vinylidene chloride copolymer coatings identified in this section and applied on polycarbonate film may be safely used as food-contact surfaces,...

  17. Influence of chloride ions on actinide chemistry. Effects of radiolysis and temperature

    International Nuclear Information System (INIS)

    This research thesis addresses the chemistry of radionuclides in natural waters, an issue which is related to the management of long life radioactive wastes. Chloride ions are the most concentrated ions but their weak complexing power explains the fact that they are often neglected in speciation calculations. The objective of this research is to identify the influence of chloride ions on transuranium elements (Np, Pu and Am). Their influence is investigated with respect to chemical conditions close to that of underground waters and for concentrated media related to storage conditions in saline media. The author discusses media-related corrections applied to thermodynamic functions, reports a bibliographic study on the stability of actinide chloride complexes, reports a spectrophotometric investigation of complexation by chlorides, and reports the study of the influence of chlorides in a carbonate medium (solubility of americium at different temperatures, and notably at room temperature)

  18. Cystic Fibrosis Gene Encodes a cAMP-Dependent Chloride Channel in Heart

    Science.gov (United States)

    Hart, Padraig; Warth, John D.; Levesque, Paul C.; Collier, Mei Lin; Geary, Yvonne; Horowitz, Burton; Hume, Joseph R.

    1996-06-01

    cAMP-dependent chloride channels in heart contribute to autonomic regulation of action potential duration and membrane potential and have been inferred to be due to cardiac expression of the epithelial cystic fibrosis transmembrane conductance regulator (CFTR) chloride channel. In this report, a cDNA from rabbit ventricle was isolated and sequenced, which encodes an exon 5 splice variant (exon 5-) of CFTR, with >90% identity to human CFTR cDNA present in epithelial cells. Expression of this cDNA in Xenopus oocytes gave rise to robust cAMP-activated chloride currents that were absent in control water-injected oocytes. Antisense oligodeoxynucleotides directed against CFTR significnatly reduced the density of cAMP-dependent chloride currents in acutely cultured myocytes, thereby establishing a direct functional link between cardiac expression of CFTR protein and an endogenous chloride channel in native cardiac myocytes.

  19. The influence of cement type and temperature on chloride binding in cement paste

    DEFF Research Database (Denmark)

    Jensen, Ole Mejlhede; Korzen, Migge Sofie Hoffmann; Skibsted, Jørgen

    1998-01-01

    cement clinker. Both theoretical considerations and experimental data for chloride binding in cement pastes are presented. A physico-chemically based model to describe the influence of temperature on physical binding of chloride is presented. Solid-state 27Al and 29Si magic-angle spinning (MAS) nuclear......This paper describes effects of cement type and temperature on chloride binding in cement paste, which is an important subject in relation to life-time modelling of reinforced concrete structures. The influence of cement type on chloride binding is investigated by substituting cement with pure...... magnetic resonance (NMR) spectroscopy has been used for quantification of the anhydrous and hydrated aluminate and silicate phases in the chloride exposed cement pastes. The 27Al isotropic chemical shift and nuclear quadrupole coupling is reported for a synthetic sample of Friedel's salt, Ca2Al(OH)6Cl×2H2O....

  20. Chloride stress corrosion cracking of Alloy 600 in boric acid solutions

    Energy Technology Data Exchange (ETDEWEB)

    Berge, Ph. [Electricite de France, 92 - Paris la Defense (France); Noel, D.; Gras, J.M.; Prieux, B. [Electricite de France, 77 - Moret-sur-Loing (France). Direction des Etudes et Recherches

    1997-10-01

    The high nickel austenitic alloys are generally considered to have good resistance to chloride stress corrosion cracking. In the standard boiling magnesium chloride solution tests, alloys with more than 40% nickel are immune. Nevertheless, more recent data show that cracking can occur in both Alloys 600 and 690 if the solution is acidified. In other low pH media, such as boric acid solution at 100 deg C, transgranular and intergranular cracking are observed in Alloy 600 in the presence of minor concentrations of sodium chloride (2g/I). In concentrated boric acid at higher temperatures (250 and 290 deg C), intergranular cracking also occurs, either when the chloride concentration is high, or at low chloride contents and high oxygen levels. The role of pH and a possible specific action of boric acid are discussed, together with the influence of electrochemical potential. (author) 21 refs.

  1. Strength, porosity, and chloride resistance of mortar using the combination of two kinds of pozzolanic materials

    Science.gov (United States)

    Rukzon, Sumrerng; Chindaprasirt, Prinya

    2013-08-01

    This article presents a study on the resistance to chloride penetration, corrosion, porosity, and strength of mortar containing fine fly ash (FA), ground rice husk-bark ash (RB), and ground bagasse ash (BA). Ordinary Portland cement (CT) was blended with a single pozzolan and two pozzolans. Strength, porosity, rapid chloride penetration, immersion, and corrosion tests were performed to characterize the mortar. Test results showed that the use of ternary blends of CT, FA, and RB or BA decreased the porosity of the mortar, as compared with binary blended mortar containing CT and RB or BA. The resistance to chloride penetration of the mortar improved substantially with partial replacement of CT with FA, RB, and BA. The use of ternary blends of CT, FA and RB or BA produced the mortar with good strength and resistance to chloride penetration. The resistance to chloride penetration was higher with an increase in the replacement level due to the reduced calcium hydroxide.

  2. Chloride stress corrosion cracking of Alloy 600 in boric acid solutions

    International Nuclear Information System (INIS)

    The high nickel austenitic alloys are generally considered to have good resistance to chloride stress corrosion cracking. In the standard boiling magnesium chloride solution tests, alloys with more than 40% nickel are immune. Nevertheless, more recent data show that cracking can occur in both Alloys 600 and 690 if the solution is acidified. In other low pH media, such as boric acid solution at 100 deg C, transgranular and intergranular cracking are observed in Alloy 600 in the presence of minor concentrations of sodium chloride (2g/I). In concentrated boric acid at higher temperatures (250 and 290 deg C), intergranular cracking also occurs, either when the chloride concentration is high, or at low chloride contents and high oxygen levels. The role of pH and a possible specific action of boric acid are discussed, together with the influence of electrochemical potential. (author)

  3. Corrosion of reinforcement induced by environment containing chloride and carbon dioxide

    Indian Academy of Sciences (India)

    Vladimír Živica

    2003-10-01

    Reinforced concrete structures during their exploitation may be exposed to the common action of carbonation and chlorides causing corrosion of steel reinforcement. Therefore, the related data seem to be interesting and important when the evaluation of the service life of the structures is the object of interest. This fact was a motivation for the present experimental study on the sequence of action of chloride solutions and carbonation of the embedding concrete. The results obtained show that carbonation of concrete foregoing the action of chloride solutions may intensify the process of corrosion of steel reinforcement in comparison to the converse sequence of the action of mentioned media. At the same time the natrium chloride solution has been shown as a more aggressive medium opposite to the calcium and magnesium chloride solutions.

  4. Host-Guest Strategy to Reversibly Control a Chloride Carrier Process with Cyclodextrins.

    Science.gov (United States)

    Gravel, Julien; Kempf, Julie; Schmitzer, Andreea

    2015-12-14

    Herein, we report a reversible modular chloride transport process based on host-guest competitive interactions between an imidazolium-based chloride carrier and beta-cyclodextrin. We report evidence for the formation of the supramolecular complex between 1,3-bis(2-(adamantan-1-yl)ethyl)imidazolium bis(trifluorometyl-sulfonyl)imide with two β-cyclodextrins. Through fluorescence assays in liposomes and black lipid membrane experiments, we demonstrate that the formation of the supramolecular complex results in the inhibition of the chloride transport. We show that the chloride transport process can be entirely restored in the presence of competitive adamantyl-functionalized guests. This is the first example of an entirely reversible modular chloride transport process in phospholipid bilayers involving a mobile carrier transporter and cyclodextrin supramolecular complex.

  5. Electroanalytical determination of trace chloride in room-temperature ionic liquids.

    Science.gov (United States)

    Villagrán, Constanza; Banks, Craig E; Hardacre, Christopher; Compton, Richard G

    2004-04-01

    The electroanalytical quantification of chloride in [C4mim][BF4], [C4mim][NTf2], and [C4mim][PF6] ionic liquids has been explored using linear sweep and square wave voltammetry. Cathodic stripping voltammetry at a silver disk electrode is found to be the most sensitive. The methodology is based on first holding the potential of the electrode at +2.0 V (vs Ag wire), to accumulate silver chloride at the electrode. On applying a cathodic scan, a stripping wave is observed corresponding to the reduction of the silver chloride. This stripping protocol was found to detect ppb levels of chloride in [C4mim][BF4], [C4mim][NTf2], and [C4mim][PF6]. Although other methods for chloride have been reported for [BF4](-)- and [PF6](-)-based ionic liquids, no methods have been reported for [NTf2](-) ionic liquids.

  6. Prediction of the Chloride Resistance of Concrete Modified with High Calcium Fly Ash Using Machine Learning

    Directory of Open Access Journals (Sweden)

    Michał Marks

    2015-12-01

    Full Text Available The aim of the study was to generate rules for the prediction of the chloride resistance of concrete modified with high calcium fly ash using machine learning methods. The rapid chloride permeability test, according to the Nordtest Method Build 492, was used for determining the chloride ions’ penetration in concrete containing high calcium fly ash (HCFA for partial replacement of Portland cement. The results of the performed tests were used as the training set to generate rules describing the relation between material composition and the chloride resistance. Multiple methods for rule generation were applied and compared. The rules generated by algorithm J48 from the Weka workbench provided the means for adequate classification of plain concretes and concretes modified with high calcium fly ash as materials of good, acceptable or unacceptable resistance to chloride penetration.

  7. Fittings of unplasticized polyvinyl chloride (PVC-U), chlorinated polyvinyl chloride (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Dimensions of sockets - Metric series

    CERN Document Server

    International Organization for Standardization. Geneva

    1985-01-01

    Fittings of unplasticized polyvinyl chloride (PVC-U), chlorinated polyvinyl chloride (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure - Dimensions of sockets - Metric series

  8. Estimation of Groundwater Recharge at Pahute Mesa using the Chloride Mass-Balance Method

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, Clay A [DRI; Hershey, Ronald L [DRI; Healey, John M [DRI; Lyles, Brad F [DRI

    2013-07-01

    Groundwater recharge on Pahute Mesa was estimated using the chloride mass-balance (CMB) method. This method relies on the conservative properties of chloride to trace its movement from the atmosphere as dry- and wet-deposition through the soil zone and ultimately to the saturated zone. Typically, the CMB method assumes no mixing of groundwater with different chloride concentrations; however, because groundwater is thought to flow into Pahute Mesa from valleys north of Pahute Mesa, groundwater flow rates (i.e., underflow) and chloride concentrations from Kawich Valley and Gold Flat were carefully considered. Precipitation was measured with bulk and tipping-bucket precipitation gauges installed for this study at six sites on Pahute Mesa. These data, along with historical precipitation amounts from gauges on Pahute Mesa and estimates from the PRISM model, were evaluated to estimate mean annual precipitation. Chloride deposition from the atmosphere was estimated by analyzing quarterly samples of wet- and dry-deposition for chloride in the bulk gauges and evaluating chloride wet-deposition amounts measured at other locations by the National Atmospheric Deposition Program. Mean chloride concentrations in groundwater were estimated using data from the UGTA Geochemistry Database, data from other reports, and data from samples collected from emplacement boreholes for this study. Calculations were conducted assuming both no underflow and underflow from Kawich Valley and Gold Flat. Model results estimate recharge to be 30 mm/yr with a standard deviation of 18 mm/yr on Pahute Mesa, for elevations >1800 m amsl. These estimates assume Pahute Mesa recharge mixes completely with underflow from Kawich Valley and Gold Flat. The model assumes that precipitation, chloride concentration in bulk deposition, underflow and its chloride concentration, have been constant over the length of time of recharge.

  9. Protective Role of Sodium Selenite on Mercuric Chloride Induced Oxidative and Renal Stress in Rats

    Directory of Open Access Journals (Sweden)

    Necib, Youcef

    2013-04-01

    Full Text Available Backgroud: Reactive oxygen species are known to play a major role in mercuric chloride induced oxidative and renal stress. Sodium selenite as an exogenous source of selenium is used for endogenous selenoprotein synthesis to scavenge the free radicals. The study was designed to investigate the possible protective role of sodium selenite in mercuric chloride induced renal stress, by using biochemical approaches. Adult male Albinos Wistar rats were randomly divided into four groups. The first group was served as the control, the second group was given sodium selenite (0.25 mg/kg b.w, while the third group was given mercuric chloride (0.25 mg/kg, finally, the fourth group was given combined treatment of sodium selenite and mercuric chloride for 3 weeks.Results: The effects of sodium selenite on mercuric chloride induced oxidative and renal stress were evaluated by serum creatinine, urea, uric acid, billirubin levels and LDH activity, kidney tissue lipid peroxidation, GSH levels, GSH-Px, GST and catalase activities and hematological parameters. Administration of mercuric chloride induced significant increase in serum: creatinine, urea, uric acid and billirubin concentration showing renal stress. Mercuric chloride also induced oxidative stress, as indicate by decreased kidney tissue of GSH level, GSH-Px, GST, and catalase activities along with increase the level of lipid peroxidation. Furthermore, treatment with mercuric chloride caused a marked elevation of kidney weight and decreased body weight and erythrocytes, hemoglobin, hematocrit levels. Sodium selenite treatment markedly reduced elevated serum: creatinine, urea, uric acid and billirubin levels, and LDH activity and conteracted the deterious effects of mercuric chloride on oxidative stress markers and hematological parameters and atteneuated histopathological changes caused by HgCl2 in kidney.Conclusion: Our results indicate that sodium selenite could have a beneficial role against mercuric

  10. Activity coefficients in (hydrogen chloride+holmium chloride) (aq) from T=(278.15 to 328.15) K

    International Nuclear Information System (INIS)

    Activity coefficients of HCl in (hydrogen chloride+holmium chloride) (aq) have been calculated from the observed e.m.f.s using the Nernst equation. The temperatures ranged from (278.15 to 328.15) K at 5 K intervals and at constant total ionic strengths of (0.01, 0.025, 0.05, 0.1, 0.25, 0.5, 1.0, and 1.5) mol.kg-1. Electromotive-force measurements were made on the cell without liquid junction of the type:Pt vertical bar H2(g,p=101.325kPa) vertical bar HCl(mA),HoCl3(mB) vertical bar AgCl(s), vertical bar Ag(s) The results of the activity coefficients of HCl for this mixed electrolyte mixture have been interpreted in terms of the simpler Harned's equations and the ion-interaction model of Pitzer. Results show that the quadratic term is sufficient for the full range of YB (the ionic strength fraction of the salt) to 0.9 at all the ionic strengths studied. The Pitzer's mixing parameters SθH,Ho and ΨH,Ho,Cl (including higher order electrostatic effects) and θH,Ho and ΨH,Ho,Cl (excluding higher order electrostatic effects) have been determined. These values at T=298.15 K are: SθH,Ho=0.115, ΨH,Ho,Cl=-.071; and θH,Ho=-.663, ΨH,Ho,Cl=0.165. The parameters obtained in this study reproduce the activity coefficients of HCl in the mixtures within 0.015 over the entire range of ionic strengths and within 0.009 for I>=0.05 mol.kg-1 over the entire temperature range

  11. Stability of Melphalan in 0.9% Sodium Chloride Solutions Prepared in Polyvinyl Chloride Bags for Intravenous Injection.

    Science.gov (United States)

    Desmaris, Romain-Pacôme; Mercier, Lionel; Paci, Angelo

    2015-09-01

    Melphalan is an alkylating agent frequently used in an intravenous formulation to treat hematologic malignancies and solid tumors in both adults and children. According to the manufacturer, melphalan is stable in sterile 0.9% sodium chloride for 90 min at room temperature (RT). Several authors have studied the stability of different concentrations of melphalan; however, most were not adapted to the current manufacturing process applied in pharmaceutical centralized units. This study was conducted to determine the stability of melphalan in 0.9% sodium chloride solutions at concentrations used for intravenous injection in practice. Melphalan is commonly prepared in diluted solutions ranging from 2 to 4 mg/ml for the treatment of adult patients and at lower concentrations (down to 0.5 mg/ml) for pediatric use. Accordingly, these were the three concentrations chosen for this study. Melphalan concentrations were measured with high-performance thin-layer chromatography (HPTLC). At RT, admixtures prepared at 4 mg/ml were stable for up to 8 h without protection from light; however, at lower concentrations, such as 0.5 and 2 mg/ml, stability did not exceed 2 h. When refrigerated, melphalan was stable for 24 h at 2 mg/ml; however, at 0.5 and 4 mg/ml, the drug was not stable. Melphalan solutions present with limited stability at 0.5, 2, and 4 mg/ml and are not adapted for delayed administration in pharmaceutical centralized units. However, at 4 mg/ml and at RT, a stability of 8 h is very interesting in practice and allows sufficient time for preparation, pharmaceutical control, transport, and administration.

  12. Correlation between chloride flux via the mitochondria-rich cells and transepithelial water movement in isolated frog skin (Rana esculenta)

    DEFF Research Database (Denmark)

    Nielsen, Robert

    1995-01-01

    Antidiuretic hormone; chloride transport; electroosmosis; Frog skin; Intercalated cells; Local osmosis; Mitochondria-rich cells.......Antidiuretic hormone; chloride transport; electroosmosis; Frog skin; Intercalated cells; Local osmosis; Mitochondria-rich cells....

  13. Catchment conceptualisation for examining applicability of chloride mass balance method in an area with historical forest clearance

    Directory of Open Access Journals (Sweden)

    H. Guan

    2010-07-01

    Full Text Available Of the various approaches for estimating groundwater recharge, the chloride mass balance (CMB method is one of the most frequently used, especially for arid and semiarid regions. Widespread native vegetation clearance, common in many areas globally, has changed the land surface boundary condition, posing the question as to whether the current system has reached new chloride equilibrium, required for a CMB application. Although a one-dimensional CMB can be applied at a point where the water and chloride fluxes are locally in steady state, the CMB method is usually applied at a catchment scale owing to significant lateral flows in mountains. The applicability of the CMB method to several conceptual catchment types of various chloride equilibrium conditions is examined. The conceptualisation, combined with some local climate conditions, is shown to be useful in assessing whether or not a catchment has reached new chloride equilibrium. The six conceptual catchment types are tested with eleven selected catchments in the Mount Lofty Ranges (MLR, a coastal hilly area in South Australia having experienced widespread historical forest clearance. The results show that six of the eleven catchments match a type VI chloride balance condition (chloride non-equilibrium with a gaining stream, with the ratios of stream chloride output (O over atmospheric chloride input (I, or catchment chloride O/I ratios, ranging from 2 to 4. Two catchments match a type V chloride balance condition (chloride non-equilibrium with a losing stream, with catchment chloride O/I ratios about 0.5. For these type V and type VI catchments, the CMB method is not applicable. The results also suggest that neither a chloride O/I ratio less than one nor a low seasonal fluctuation of streamflow chloride concentration (a factor below 4 guarantees a chloride equilibrium condition in the study area. A large chloride O/I value (above one and a large fluctuation of streamflow chloride

  14. Bicarbonate secretion in vivo by rat distal tubules during alkalosis induced by dietary chloride restriction and alkali loading.

    OpenAIRE

    Levine, D Z; Iacovitti, M; Harrison, V

    1991-01-01

    To examine in vivo the separate effects on distal tubule JtCO2, of dietary chloride restriction, bicarbonate loading, and changes in luminal chloride concentration, we microperfused distal tubules at a physiologic flow rate (8 nl/min) with solutions containing either 45 or 0 mM chloride (after gluconate substitution). Rats were fed a diet containing zero, minimal, or normal amounts of chloride, while drinking either water or a solution of 0.15 M sodium bicarbonate. Neither extracellular fluid...

  15. Effects of slag and fly ash on reinforcement corrosion in concrete in chloride environment: Research from the Netherlands

    OpenAIRE

    Polder, R.B.

    2012-01-01

    A review is given of research on the durability performance of concrete made with blast furnace slag and fly ash related to chloride induced reinforcement corrosion, carried out in the Netherlands, where slag has been used in cement for almost a century. Results are presented from field studies on concrete in marine environment and laboratory studies involving chloride exposure. Chloride surface content, diffusion coefficient, electrical resistivity, critical chloride content and corrosion ra...

  16. Durability of reinforced adobe exposed to chloride ions

    Directory of Open Access Journals (Sweden)

    Giménez, A.

    2006-12-01

    Full Text Available One of the primary shortcomings of adobe, a dried mudblock stabilized with sisal hemp and cement widely used across all of Latin America, is its dimensional instability when exposed to water or aggressive environments. The present paper evaluates the electrochemical performance of reinforced adobe block after 1,000 days of exposure to a simulated marine environment. The specimens used were adobe blocks internally reinforced with 3/8-inch steel bars. The specimens were watered every two weeks: one group with potable water to simulate a natural urban environment and the other with a 3% sodium chloride solution to simulate a marine environment.Chloride penetration in powder extracted from the specimens was determined using the Mohr method. Electrochemical measurements included Gecor 6 electric potential(Eº and corrosion intensity (icorr readings. The final conclusion drawn from an analysis of the results was that in all cases the amount of free chlorides present sufficed to depassivate reinforcing steel and that the system component providing the most effective protection was the rough casting mortar. Consequently, this type of adobe mixes is not recommended for use in marine or industrial environments.La tierra-cemento-sisal es un material cuyo uso se encuentra muy difundido en toda Latinoamérica, entre sus principales limitaciones está la inestabilidad volumétrica ante el agua y ambientes agresivos. Por tal motivo, en este trabajo se evaluó el comportamiento electroquímico de bloques de tierra-cemento-sisal armado expuestos durante 1.000 días a un ambiente marino simulado. Las probetas utilizadas fueron bloques de tierra-cemento-sisal incorporándole internamente barras de acero de 3/8 de pulg. Las probetas se sometieron a un rociado quincenal: las de ambiente natural urbano con agua potable y las de ambiente marino simulado con una solución al 3% de cloruro de sodio. La penetración de cloruros se determinó extrayendo polvillo y

  17. Pourbaix Diagrams for Copper in 5 m Chloride Solution

    Energy Technology Data Exchange (ETDEWEB)

    Beverskog, Bjoern [OECD Halden Reactor Project (Norway); Pettersson, Sven-Olof [ChemIT, Nykoeping (Sweden)

    2002-12-01

    Pourbaix diagrams for the copper in 5 molal chlorine at 5-100 deg C have been calculated. Predominance diagrams for dissolved copper containing species have also been calculated. Two different total concentrations of dissolved copper, 10{sup -4} and 10{sup -6} molal, have been used in the calculations. ChIoride is the predominating chlorine species in aqueous solutions. Therefore Pourbaix diagrams for chlorine can be used to discuss the effect of chloride solutions on the corrosion behavior of a metal. Presence of chloride increases the corrosion regions of copper at the expense of the immunity and passivity regions in the Pourbaix diagrams. Copper corrodes in 5 molal chloride by formation Of CuCl{sub 3}{sup 2-} in acid and alkaline solutions. At higher potentials in acid solutions CuCl{sub 3}{sup 2-} is oxidized to CuCl{sub 2}(aq), which at increasing potentials can form CuCI{sup +}, Cu{sup 2+} or CuClO{sub 3}{sup +}. Copper passivates by formation of Cu{sub 2}O(cr), CuO(cr), or CUO{sub 2} 3 Cu(OH){sub 2}(s). Cu{sub 2}O(cr) does not form at [Cu(aq)]{sub tot} = 10{sup -6} molal in 5 m C1-, which results in a corrosion area between the immunity and passivity areas. Copper at the anticipated repository potentials and pH corrodes at 100 deg C at [Cu(aq)]{sub tot} = 10{sup -4} molal and at 80-100 deg C at [Cu(aq)]{sub tot} = 10{sup -6} molal. Copper at the anticipated repository potentials and pH can corrode at 80 deg C at [Cu(aq)]{sub tot} = 10{sup -4} molal and at 50 deg C at [Cu(aq)]{sub tot} = 10{sup -6} molal. The bentonite clay and copper canisters in the deep repository can be considered as a 'closed' system from macroscopic point of view. The clay barrier limits both inward diffusion of oxygen and aggressive anions as well as outward diffusion of corrosion products from the canisters. Both diffusion phenomena will drive the corrosion potential into the immunity area of the Pourbaix diagram for copper. The corrosion will thereby stop by an automatic

  18. Recharge Estimation Using Water, Chloride and Isotope Mass Balances

    Science.gov (United States)

    Dogramaci, S.; Firmani, G.; Hedley, P.; Skrzypek, G.; Grierson, P. F.

    2014-12-01

    Discharge of surplus mine water into ephemeral streams may elevate groundwater levels and alter the exchange rate between streams and underlying aquifers but it is unclear whether volumes and recharge processes are within the range of natural variability. Here, we present a case study of an ephemeral creek in the semi-arid subtropical Hamersley Basin that has received continuous mine discharge for more than five years. We used a numerical model coupled with repeated measurements of water levels, chloride concentrations and the hydrogen and oxygen stable isotope composition (δ2H and δ18O) to estimate longitudinal evapotranspiration and recharge rates along a 27 km length of Weeli Wolli Creek. We found that chloride increased from 74 to 120 mg/L across this length, while δ18O increased from -8.24‰ to -7.00‰. Groundwater is directly connected to the creek for the first 13 km and recharge rates are negligible. Below this point, the creek flows over a highly permeable aquifer and water loss by recharge increases to a maximum rate of 4.4 mm/d, which accounts for ~ 65% of the total water discharged to the creek. Evapotranspiration losses account for the remaining ~35%. The calculated recharge from continuous flow due to surplus water discharge is similar to that measured for rainfall-driven flood events along the creek. Groundwater under the disconnected section of the creek is characterised by a much lower Cl concentration and more depleted δ18O value than mining discharge water but is similar to flood water generated by large episodic rainfall events. Our results suggest that the impact of recharge from continuous flow on the creek has not extended beyond 27 km from the discharge point. Our approach using a combination of hydrochemical and isotope methods coupled with classical surface flow hydraulic modelling allowed evaluation of components of water budget otherwise not possible in a highly dynamic system that is mainly driven by infrequent but large episodic

  19. Molten Chloride Salts for Heat Transfer in Nuclear Systems

    Science.gov (United States)

    Ambrosek, James Wallace

    2011-12-01

    A forced convection loop was designed and constructed to examine the thermal-hydraulic performance of molten KCl-MgCl2 (68-32 at %) salt for use in nuclear co-generation facilities. As part of this research, methods for prediction of the thermo-physical properties of salt mixtures for selection of the coolant salt were studied. In addition, corrosion studies of 10 different alloys were exposed to the KCl-MgCl2 to determine a suitable construction material for the loop. Using experimental data found in literature for unary and binary salt systems, models were found, or developed to extrapolate the available experimental data to unstudied salt systems. These property models were then used to investigate the thermo-physical properties of the LINO3-NaNO3-KNO 3-Ca(NO3), system used in solar energy applications. Using these models, the density, viscosity, adiabatic compressibility, thermal conductivity, heat capacity, and melting temperatures of higher order systems can be approximated. These models may be applied to other molten salt systems. Coupons of 10 different alloys were exposed to the chloride salt for 100 hours at 850°C was undertaken to help determine with which alloy to construct the loop. Of the alloys exposed, Haynes 230 had the least amount of weight loss per area. Nickel and Hastelloy N performed best based on maximum depth of attack. Inconel 625 and 718 had a nearly uniform depletion of Cr from the surface of the sample. All other alloys tested had depletion of Cr along the grain boundaries. The Nb in Inconel 625 and 718 changed the way the Cr is depleted in these alloys. Grain-boundary engineering (GBE) of Incoloy 800H improved the corrosion resistance (weight loss and maximum depth of attack) by nearly 50% as compared to the as-received Incoloy 800H sample. A high temperature pump, thermal flow meter, and pressure differential device was designed, constructed and tested for use in the loop, The heat transfer of the molten chloride salt was found to

  20. 40 CFR 721.10056 - Benzenemethanaminium, N-(3-aminopropyl)-N,N-dimethyl-, N-soya acyl derivs., chlorides.

    Science.gov (United States)

    2010-07-01

    ...)-N,N-dimethyl-, N-soya acyl derivs., chlorides. 721.10056 Section 721.10056 Protection of Environment...-aminopropyl)-N,N-dimethyl-, N-soya acyl derivs., chlorides. (a) Chemical substance and significant new uses...-dimethyl-, N-soya acyl derivs., chlorides (PMN P-03-47; CAS No. 90194-13-1) is subject to reporting...

  1. 40 CFR Table 4 to Subpart Ddddd of... - Operating Limits for Boilers and Process Heaters With Hydrogen Chloride Emission Limits

    Science.gov (United States)

    2010-07-01

    ... Process Heaters With Hydrogen Chloride Emission Limits 4 Table 4 to Subpart DDDDD of Part 63 Protection of... Heaters With Hydrogen Chloride Emission Limits As stated in § 63.7500, you must comply with the following applicable operating limits: If you demonstrate compliance with applicable hydrogen chloride emission...

  2. Chloride Ion Transmission Model under the Drying-wetting Cycles and Its Solution

    Institute of Scientific and Technical Information of China (English)

    HUANG Ying; WEI Jun; DONG Rongzhen; ZENG Hua

    2014-01-01

    The chloride ion transmission model considering diffusion and convection was established respectively for different zones in concrete by analyzing chloride ion transmission mechanism under the drying-wetting cycles. The finite difference method was adopted to solve the model. The equation of chloride ion transmission model in the convection and diffusion zone of concrete was discreted by the group explicit scheme with right single point (GER method) and the equation in diffusion zone was discreted by FTCS difference scheme. According to relative humidity characteristics in concrete under drying-wetting cycles, the seepage velocity equation was formulated based on Kelvin Equation and Darcy’s Law. The time-variant equations of chloride ion concentration of concrete surface and the boundary surface of the convection and diffusion zone were established. Based on the software MATLAB the numerical calculation was carried out by using the model and basic material parameters from the experiments. The calculation of chloride ion concentration distribution in concrete is in good agreement with the drying-wetting cycles experiments. It can be shown that the chloride ion transmission model and the seepage velocity equation are reasonable and practical. Studies have shown that the chloride ion transmission in concrete considering convection and diffusion under the drying-wetting cycles is the better correlation with the actual situation than that only considering the diffusion.

  3. Activation of AMPK inhibits cholera toxin stimulated chloride secretion in human and murine intestine.

    Directory of Open Access Journals (Sweden)

    Ailín C Rogers

    Full Text Available Increased intestinal chloride secretion through chloride channels, such as the cystic fibrosis transmembrane conductance regulator (CFTR, is one of the major molecular mechanisms underlying enterotoxigenic diarrhea. It has been demonstrated in the past that the intracellular energy sensing kinase, the AMP-activated protein kinase (AMPK, can inhibit CFTR opening. We hypothesized that pharmacological activation of AMPK can abrogate the increased chloride flux through CFTR occurring during cholera toxin (CTX mediated diarrhea. Chloride efflux was measured in isolated rat colonic crypts using real-time fluorescence imaging. AICAR and metformin were used to activate AMPK in the presence of the secretagogues CTX or forskolin (FSK. In order to substantiate our findings on the whole tissue level, short-circuit current (SCC was monitored in human and murine colonic mucosa using Ussing chambers. Furthermore, fluid accumulation was measured in excised intestinal loops. CTX and forskolin (FSK significantly increased chloride efflux in isolated colonic crypts. The increase in chloride efflux could be offset by using the AMPK activators AICAR and metformin. In human and mouse mucosal sheets, CTX and FSK increased SCC. AICAR and metformin inhibited the secretagogue induced rise in SCC, thereby confirming the findings made in isolated crypts. Moreover, AICAR decreased CTX stimulated fluid accumulation in excised intestinal segments. The present study suggests that pharmacological activation of AMPK effectively reduces CTX mediated increases in intestinal chloride secretion, which is a key factor for intestinal water accumulation. AMPK activators may therefore represent a supplemental treatment strategy for acute diarrheal illness.

  4. Impact of the associated cation on chloride binding of Portland cement paste

    Energy Technology Data Exchange (ETDEWEB)

    De Weerdt, K., E-mail: klaartje.d.weerdt@ntnu.no [Department of Structural Engineering, Norwegian University of Science and Technology (Norway); Department of Engineering and Applied Sciences, University of Bergamo (Italy); Colombo, A. [Department of Structural Engineering, Norwegian University of Science and Technology (Norway); Department of Engineering and Applied Sciences, University of Bergamo (Italy); Coppola, L. [Department of Engineering and Applied Sciences, University of Bergamo (Italy); Justnes, H. [SINTEF Building and Infrastructure, Trondheim (Norway); Geiker, M.R. [Department of Structural Engineering, Norwegian University of Science and Technology (Norway)

    2015-02-15

    Well hydrated cement paste was exposed to MgCl{sub 2}, CaCl{sub 2} and NaCl solutions at 20 °C. The chloride binding isotherms for free chloride concentrations ranging up to 1.5 mol/l were determined experimentally. More chlorides were found to be bound when the associated cation was Mg{sup 2} {sup +} or Ca{sup 2} {sup +} compared to Na{sup +}. The chloride binding capacity of the paste appeared to be related to the pH of the exposure solution. In order to explain the cation dependency of the chloride binding a selection of samples was investigated in detail using experimental techniques such as TG, XRD and SEM–EDS to identify the phases binding the chlorides. The experimentally obtained data were compared with the calculations of a thermodynamic model, GEMS. It was concluded that the measured change in chloride binding depending on the cation was mainly governed by the pH of the exposure solution and thereby the binding capacity of the C-S-H.

  5. The impact of sulphate and magnesium on chloride binding in Portland cement paste

    Energy Technology Data Exchange (ETDEWEB)

    De Weerdt, K., E-mail: klaartje.d.weerdt@ntnu.no [Department of Structural Engineering, Norwegian University of science and Technology, Trondheim (Norway); SINTEF Building and Infrastructure, Trondheim (Norway); Orsáková, D. [Department of Civil Engineering, Technical University of Brno, Brno (Czech Republic); Geiker, M.R. [Department of Structural Engineering, Norwegian University of science and Technology, Trondheim (Norway)

    2014-11-15

    The effect of magnesium and sulphate present in sea water on chloride binding in Portland cement paste was investigated. Ground well hydrated cement paste was exposed to MgCl{sub 2}, NaCl, NaCl + MgCl{sub 2}, MgSO{sub 4} + MgCl{sub 2} and artificial sea water solutions with a range of concentrations at 20 °C. Chloride binding isotherms are determined and pH of the solutions were measured. A selection of samples was examined by SEM-EDS to identify phase changes upon exposure. The experimental data were compared with calculations of a thermodynamic model. Chloride binding from sea water was similar to chloride binding for NaCl solutions. The magnesium content in the sea water lead to a slight decrease in pH, but this did not result in a notable increase in chloride binding. The sulphate present in sea water reduces both chloride binding in C–S–H and AFm phases, as the C–S–H incorporates more sulphates instead of chlorides, and part of the AFm phases converts to ettringite.

  6. Crevice corrosion of alloy 22 in fluoride and chloride containing solutions

    International Nuclear Information System (INIS)

    Alloy 22 (N06022) is highly resistant to localized corrosion. Alloy 22 may be susceptible to crevice corrosion in pure chloride (Cl-) solutions under aggressive environmental conditions. The effect of the fluoride (F-) on the susceptibility to crevice corrosion induced by chloride ions is still not well established. The objective of the present work was to explore the crevice corrosion resistance of this alloy to different mixtures of fluorides and chlorides. Cyclic potentiodynamic polarization (CPP) tests were conducted in deaerated aqueous solutions of pure halide ions and also in different mixtures of chloride and fluoride at 90 C degrees and pH 6. The range of chloride concentration [Cl-] was 0.001 M ≤ [Cl-] ≤ 1 M and the range of molar fluoride to chloride ratio [F-]/[Cl-] was 0.1≤ [F-]/[Cl-] ≤ 10. Results showed that Alloy 22 was susceptible to crevice corrosion in all the pure chloride solutions but not in the pure fluoride solutions. A molar ratio [F-]/[Cl-] ranging from 5 to 10 was required for the inhibition of crevice corrosion to be complete in the halide mixtures. A moderate or nil inhibitive effect was observed for molar ratios [F-]/[Cl-] < 5. (author)

  7. Thermodynamic properties of lithium chloride ammonia complexes under heat pump type II working conditions

    Energy Technology Data Exchange (ETDEWEB)

    Van der Pal, M.; Veldhuis, J.B.J. [ECN Efficiency and Infrastructure, Petten (Netherlands)

    2010-12-15

    Heat pumps type II can be used for upgrading industrial waste heat to above pinch temperatures, with a typical lift from 130C to 180C. At ECN such a heat pump is developed based on the reaction of ammonia with lithium chloride and magnesium chloride as respectively the low and high temperature salt. The thermodynamic properties of these salts are required to determine temperature lift and coefficient of performance. This paper presents the behavior of the low temperature salt, lithium chloride, under typical working conditions with temperatures ranging from ambient temperature to 150C and ammonia pressures ranging from 0.3 to 30 bars. Measurements using an HPDSC, an autoclave and a custom-made ammonia pressure cell have been conducted to determine the pressure-temperature lines and their corresponding enthalpy and entropy values for lithium chloride ammonia complexes. The results show a direct transformation of lithium chloride mono-ammonia to lithium chloride tri-ammonia complex for ammonia pressures up to 4 bars and temperatures up to 90C. At higher temperatures and pressures a stable, intermediate ammonia complex, lithium chloride di-ammonia complex, is formed. Under these conditions also a liquid phase has been observed. The latter can greatly affect the heat pump performance, both positive (no lattice degradation) as negative (escape from matrix, form impenetrable film)

  8. Impact of the associated cation on chloride binding of Portland cement paste

    International Nuclear Information System (INIS)

    Well hydrated cement paste was exposed to MgCl2, CaCl2 and NaCl solutions at 20 °C. The chloride binding isotherms for free chloride concentrations ranging up to 1.5 mol/l were determined experimentally. More chlorides were found to be bound when the associated cation was Mg2 + or Ca2 + compared to Na+. The chloride binding capacity of the paste appeared to be related to the pH of the exposure solution. In order to explain the cation dependency of the chloride binding a selection of samples was investigated in detail using experimental techniques such as TG, XRD and SEM–EDS to identify the phases binding the chlorides. The experimentally obtained data were compared with the calculations of a thermodynamic model, GEMS. It was concluded that the measured change in chloride binding depending on the cation was mainly governed by the pH of the exposure solution and thereby the binding capacity of the C-S-H

  9. Salt equivalence and temporal dominance of sensations of different sodium chloride substitutes in butter.

    Science.gov (United States)

    de Souza, Vanessa Rios; Freire, Tassyana Vieira Marques; Saraiva, Carla Gonçalves; de Deus Souza Carneiro, João; Pinheiro, Ana Carla Marques; Nunes, Cleiton Antônio

    2013-08-01

    Studies indicate a positive association between dietary salt intake and some diseases, which has promoted the tendency to reduce the sodium in foods. The objective of this study was to determine the equivalent amount of different sodium chloride replacements required to promote the same degree of ideal saltiness in butter and to study the sensory profile of sodium chloride and the substitutes using the analysis of Temporal Dominance of Sensations (TDS). Using the magnitude estimation method, it was determined that the potencies of potassium chloride, monosodium glutamate and potassium phosphate relative to the 1% sodium chloride in butter are 83·33, 31·59 and 33·32, respectively. Regarding the sensory profile of the tested salt substitutes, a bitter taste was perceived in the butter with potassium chloride, a sour taste was perceived in the butter with potassium phosphate and sweet and umami tastes were dominant in the butter with monosodium glutamate. Of all the salt substitutes tested calcium lactate, potassium lactate, calcium chloride and magnesium chloride were impractical to use in butter.

  10. Diffusion Decay Coefficient for Chloride Ions of Concrete Containing Mineral Admixtures

    Directory of Open Access Journals (Sweden)

    Jae-Im Park

    2016-01-01

    Full Text Available The diffusion coefficient for chloride ions and the diffusion decay coefficient for chloride ions are essential variables for a service life evaluation of concrete structures. They are influenced by water-binder ratio, exposure condition, curing temperature, cement type, and the type and use of mineral admixture. Mineral admixtures such as ground granulated blast furnace slag, fly ash, and silica fume have been increasingly used to improve resistance against chloride ions penetration in concrete structures built in an offshore environment. However, there is not enough measured data to identify the statistical properties of diffusion decay coefficient for chloride ions in concrete using mineral admixtures. This paper is aimed at evaluating the diffusion decay coefficient for chloride ions of concrete using ordinary Portland cement or blended cement. NT BUILD 492 method, an electrophoresis experiment, was used to measure the diffusion coefficient for chloride ions with ages. It was revealed from the test results that the diffusion decay coefficient for chloride ions was significantly influenced by W/B and the replacement ratio of mineral admixtures.

  11. Egg Production and Quality of Quails Fed Diets with Varying Levels of Methionine and Choline Chloride

    Directory of Open Access Journals (Sweden)

    Khairani

    2016-04-01

    Full Text Available The aim of the present study was to determine the effect of choline chloride supplementation at 1500 ppm in diets containing various levels of methionine on egg production and egg quality in quails. A total of 180 birds, at 6 week-old quail were divided into 18 experimental units, and assigned to a 2 x 3 factorial design experiment with 3 replications (10 birds each in each treatment. The birds were offered diets containing choline chloride at either 0 (A1 or 1500 ppm (A2, with three levels of methionine namely, low (0.19%, B1, standard (0.79%, B2 and, high (1.05%, B3. The feeding trial lasted for 8 weeks. Supplementation of choline chloride in low methionine diet significantly (P<0.05 increased egg production, egg mass, and egg weight as compared to those without choline chloride supplementation. Supplementation of choline chloride significantly (P<0.05 increased egg yolk weight but decreased albumen and egg shell weight as compared to those fed diets without choline chloride supplementation. It can be concluded that supplementation of choline chloride to a diet containing low methionine increased egg production, without affecting egg quality.

  12. Catchment conceptualisation for examining applicability of chloride mass balance method in an area of historical forest clearance

    Directory of Open Access Journals (Sweden)

    H. Guan

    2009-11-01

    Full Text Available Among various approaches for estimating groundwater recharge, chloride mass balance (CMB method is one of the most frequently used, in particular, for arid and semiarid regions. Widespread native vegetation clearance, common history in many areas globally, has changed land surface boundary condition, posing a question whether the current system has reached new chloride equilibrium for CMB application. To examine CMB applicability for catchments, conceptual catchment types of various chloride equilibrium conditions are defined. The conceptualization, combined with some local climate conditions, is demonstrated to be useful in examining whether a catchment has reached new chloride equilibrium. The six conceptual catchment types are tested with eleven selected catchments in the Mount Lofty Ranges (MLR, a coastal hilly area in South Australia having experienced historical widespread forest clearance. The results show that six of the eleven catchments match type VI chloride balance condition (chloride non-equilibrium with a gaining stream, with the ratio of stream chloride output over atmospheric chloride input (catchment chloride O/I ranging from 2 to 4. Two catchments match type V chloride balance condition (chloride non-equilibrium with a losing stream, with catchment chloride O/I values about 0.5. For these catchments, the CMB method is not appropriate to apply. The results also suggest that neither a below-one chloride O/I value nor a low seasonal fluctuation of streamflow chloride concentration (a factor below 4 guarantees a chloride equilibrium condition in the study area. But a large chloride O/I value (above one and a large fluctuation of streamflow chloride concentration (a factor of 10 and above generally indicates either a chloride disequilibrium, or cross-catchment water transfer, or both, for which CMB is not applicable. Based on the regression between chloride O/I values and annual precipitation for type VI catchments, a catchment with

  13. Crystal structure of Halobacterium salinarum halorhodopsin with a partially depopulated primary chloride-binding site.

    Science.gov (United States)

    Schreiner, Madeleine; Schlesinger, Ramona; Heberle, Joachim; Niemann, Hartmut H

    2016-09-01

    The transmembrane pump halorhodopsin in halophilic archaea translocates chloride ions from the extracellular to the cytoplasmic side upon illumination. In the ground state a tightly bound chloride ion occupies the primary chloride-binding site (CBS I) close to the protonated Schiff base that links the retinal chromophore to the protein. The light-triggered trans-cis isomerization of retinal causes structural changes in the protein associated with movement of the chloride ion. In reverse, chemical depletion of CBS I in Natronomonas pharaonis halorhodopsin (NpHR) through deprotonation of the Schiff base results in conformational changes of the protein: a state thought to mimic late stages of the photocycle. Here, crystals of Halobacterium salinarum halorhodopsin (HsHR) were soaked at high pH to provoke deprotonation of the Schiff base and loss of chloride. The crystals changed colour from purple to yellow and the occupancy of CBS I was reduced from 1 to about 0.5. In contrast to NpHR, this chloride depletion did not cause substantial conformational changes in the protein. Nevertheless, two observations indicate that chloride depletion could eventually result in structural changes similar to those found in NpHR. Firstly, the partially chloride-depleted form of HsHR has increased normalized B factors in the region of helix C that is close to CBS I and changes its conformation in NpHR. Secondly, prolonged soaking of HsHR crystals at high pH resulted in loss of diffraction. In conclusion, the conformation of the chloride-free protein may not be compatible with this crystal form of HsHR despite a packing arrangement that hardly restrains helices E and F that presumably move during ion transport. PMID:27599860

  14. Self-assembled hemocompatible coating on poly (vinyl chloride) surface

    Science.gov (United States)

    Zha, Zhengbao; Ma, Yan; Yue, Xiuli; Liu, Meng; Dai, Zhifei

    2009-11-01

    A stable hemocompatible coating was fabricated by consecutive alternating adsorption of iron (III) and two kinds of polysaccharides, heparin (Hep) and dextran sulfate (DS), onto poly (vinyl chloride) (PVC) surfaces via electrostatic interaction. The fluctuation of contact angles with the alternative deposition of iron (III) and polysaccharides verified the progressive buildup of the mulitilayer coating onto the PVC surface. Atomic force microscopy (AFM) analysis revealed that the PVC surfaces were completely masked by iron-polysaccharides multilayer coatings. The activated partial thromboplastin time (APTT) assay showed that both Hep/Fe 3+/Hep and DS/Fe 3+/Hep coated PVC were less thrombogenic than the uncoated one. Chromogenic assay for heparin activity proved definitively that the inhibition of locally produced thrombin was ascribed to the thromboresistance of the surface-bound heparin. Compared with the unmodified PVC surfaces, iron-polysaccharide multilayer coating presented a drastically reduced adhesion in vitro of platelets, polymorphonuclear neutrophil leukocytes (PMN) and peripheral blood mononuclear cells (PBMC). Interestingly, the DS/Fe 3+/Hep coating was found to exhibit higher hydrophilicity and stability, hence lower non-specific protein adsorption in comparison with Hep/Fe 3+/Hep coating due to the incorporation of dextran sulfate into the multilayer coating.

  15. Self-assembled hemocompatible coating on poly (vinyl chloride) surface

    Energy Technology Data Exchange (ETDEWEB)

    Zha Zhengbao; Ma Yan; Yue Xiuli; Liu Meng [Nanobiotechnology Division, State Key Laboratory of Urban Water Resources and Environment, School of Sciences, Harbin Institute of Technology, Harbin 150001 (China); Dai Zhifei, E-mail: zhifei.dai@hit.edu.cn [Nanobiotechnology Division, State Key Laboratory of Urban Water Resources and Environment, School of Sciences, Harbin Institute of Technology, Harbin 150001 (China)

    2009-11-15

    A stable hemocompatible coating was fabricated by consecutive alternating adsorption of iron (III) and two kinds of polysaccharides, heparin (Hep) and dextran sulfate (DS), onto poly (vinyl chloride) (PVC) surfaces via electrostatic interaction. The fluctuation of contact angles with the alternative deposition of iron (III) and polysaccharides verified the progressive buildup of the mulitilayer coating onto the PVC surface. Atomic force microscopy (AFM) analysis revealed that the PVC surfaces were completely masked by iron-polysaccharides multilayer coatings. The activated partial thromboplastin time (APTT) assay showed that both Hep/Fe{sup 3+}/Hep and DS/Fe{sup 3+}/Hep coated PVC were less thrombogenic than the uncoated one. Chromogenic assay for heparin activity proved definitively that the inhibition of locally produced thrombin was ascribed to the thromboresistance of the surface-bound heparin. Compared with the unmodified PVC surfaces, iron-polysaccharide multilayer coating presented a drastically reduced adhesion in vitro of platelets, polymorphonuclear neutrophil leukocytes (PMN) and peripheral blood mononuclear cells (PBMC). Interestingly, the DS/Fe{sup 3+}/Hep coating was found to exhibit higher hydrophilicity and stability, hence lower non-specific protein adsorption in comparison with Hep/Fe{sup 3+}/Hep coating due to the incorporation of dextran sulfate into the multilayer coating.

  16. Theoretical predictions of novel potassium chloride phases under pressure.

    Science.gov (United States)

    Shamp, Andrew; Saitta, Patrick; Zurek, Eva

    2015-05-14

    Evolutionary structure searches predict two hitherto unknown phases of KCl that are the most stable in the pressure regime of 200-600 GPa. I41/amd-KCl, which has the lowest enthalpy between ∼200-350 GPa, can be thought of as being composed of two three-connected nets. This structure can be compared with that of the Cs-IV electride (Cs(+)e(-)): the potassium ions assume the positions of the cesium ions, and the chloride ions are found roughly in the regions of the valence electrons. Above ∼350 GPa a Pnma phase, which is isotypic with phases of CsH and CsI that are stable under pressure, becomes preferred. Just as in Pnma-CsI, the atoms in Pnma-KCl assume an hcp-like lattice; these alkali halides resemble the high-pressure structures of the isoelectronic noble gas solids Xe and Ar, respectively. The equation of state of KCl is extended to 600 GPa, enabling the use of this alkali halide as a pressure guage in ultra-high pressure static compression experiments. KCl is predicted to remain insulating to at least 420 GPa.

  17. The salt (sodium chloride) requirements of growing bobwhite quail

    Science.gov (United States)

    Nestler, R.B.

    1949-01-01

    In the two experiments involving 452 bobwhite quail chicks, seven diets containing the following salt supplements, were compared: No additional salt; 0.25 per cent KaCl; 0.50 per cent NaC1; 0.75per cent NaCl; 1.00 per cent NaCl; 0.25 per cent Na2SO4; and 0.50 per cent KCl. All four diets containing sodium chloride gave about equal results in bird-growth, and produced better weights than the diet containing no additional salt. Survival was high on the 0.50, 0.75 and 1.00 per cent levels, especially the 0.75 per cent level. Feed consumption increased directly as the salt level of the diet was raised.....The results on the Na2SO4 and KCl while better than those on no saline supplementation, and somewhat inferior to those on NaCl, nevertheless are inconclusive because of inconsistency.

  18. Stepwise modification of titanium alkoxy chloride compounds by pyridine carbinol.

    Science.gov (United States)

    Boyle, Timothy J; Ottley, Leigh Anna M; Rodriguez, Mark A; Sewell, Robin M; Alam, Todd M; McIntyre, Sarah K

    2008-11-17

    The stepwise modifications of stoichiometric mixtures of titanium chloride (TiCl 4) and titanium iso-propoxide (Ti(OPr (i)) 4) by 2-pyridine methanol (H-OPy) led to the isolation of a systematically varied, novel family of compounds. The 3:1 reaction mixture of Ti(OPr (i)) 4:TiCl 4 yielded [Cl(OPr (i)) 2Ti(mu-OPr (i))] 2 ( 1). Modification of 1 with 1 and 2 equiv of H-OPy produced [Cl(OPr (i)) 2Ti(mu c-OPy)] 2 ( 2, where mu c = chelating bridge) and "(OPy) 2TiCl(OPr (i))" ( 3, not crystallographically characterized), respectively. Altering the Ti(OPr (i)) 4 to TiCl 4 stoichiometry to 1:1 led to isolation and identification of another dimeric species [Cl 2(OPr (i))Ti(mu-OPr (i))] 2 ( 4). Upon modification with 1 equiv of H-OPy, [Cl 2(OPr (i))Ti(mu c-OPy)] 2 ( 5) was isolated from toluene and (OPy)TiCl 2(OPr (i))(py) ( 6) from py. An additional equivalent of H-OPy led to the monomeric species (OPy) 2TiCl 2 ( 7). Because of the low solubility and similarity in constructs of these compounds, additional analytical data, such as the beryllium dome or BeD-XRD powder analyses, were used to verify the bulk samples, which were found to be in agreement with the single crystal structures.

  19. Chlorine/chloride based processes for uranium ores

    International Nuclear Information System (INIS)

    The CE Lummus Minerals Division was commissioned by The Department of Supply and Services to develop order-of-magnitude capital and operating cost estimates for chlorine/chloride-based processes for uranium ores. The processes are designed to remove substantially all radioactive consituents from the ores to render the waste products harmless. Two processes were selected, one for a typical low grade ore (2 lb. U3O8/ton ore) and one for a high grade ore (50 lbs U3O8 /ton). For the low grade ore a hydrochloric acid leaching process was chosen. For high grade ore, a more complex process, including gaseous chlorination, was selected. Capital cost estimates were compiled from information obtained from vendors for the specified equipment. Building cost estimates and the piping, electrical and instrumentation costs were developed from the plant layout. Utility diagrams and mass balances were used for estimating utilities and consumables. Detailed descriptions of the bases for capital and operating cost estimates are given

  20. Removal of perfluorooctanoate from surface water by polyaluminium chloride coagulation.

    Science.gov (United States)

    Deng, Shubo; Zhou, Qin; Yu, Gang; Huang, Jun; Fan, Qing

    2011-02-01

    Perfluorooctanoate (PFOA) has been detected in surface water all over the world, and little is known of its removal by coagulation in water treatment plants. In this study, polyaluminium chloride (PACl) was used to remove PFOA from surface water, and the effects of coagulant dose, solution pH, temperature, and initial turbidity on the removal of both PFOA and suspended solids (SS) from water were investigated. Since the SS had high sorption affinity for PFOA, most PFOA was adsorbed on the particles and removed via the SS removal in the coagulation process. PFOA concentrations in aqueous phase decreased with increasing initial turbidity and PACl dose, while they increased with increasing solution pH and temperature. Other perfluorinated compounds (PFCs) with different C-F chain lengths and functional groups were also compared with PFOA. It was proved that hydrophobic interaction played an important role in the adsorption of PFOA on the SS. The addition of powdered activated carbon (PAC) before the coagulation process significantly enhanced the removal efficiency of PFOA in water, and the residual PFOA concentrations in water were less than 1 μg/L after the addition of 1-16 mg/L PAC and subsequent coagulation when the initial PFOA concentrations were in the range of 0.5-3 mg/L. PMID:21163511

  1. Chloride, bromide and iodide scintillators with europium doping

    Science.gov (United States)

    Zhuravleva, Mariya; Yang, Kan

    2014-08-26

    A halide scintillator material is disclosed where the halide may comprise chloride, bromide or iodide. The material is single-crystalline and has a composition of the general formula ABX.sub.3 where A is an alkali, B is an alkali earth and X is a halide which general composition was investigated. In particular, crystals of the formula ACa.sub.1-yEu.sub.yI.sub.3 where A=K, Rb and Cs were formed as well as crystals of the formula CsA.sub.1-yEu.sub.yX.sub.3 (where A=Ca, Sr, Ba, or a combination thereof and X=Cl, Br or I or a combination thereof) with divalent Europium doping where 0.ltoreq.y.ltoreq.1, and more particularly Eu doping has been studied at one to ten mol %. The disclosed scintillator materials are suitable for making scintillation detectors used in applications such as medical imaging and homeland security.

  2. Reversible adsorption of hydrogen chloride to ice surfaces

    Science.gov (United States)

    Zimmermann, Stefan; Kippenberger, Matthias; Crowley, John

    2015-04-01

    Hydrogen chloride is the most important reservoir of gaseous, reactive chlorine in the atmosphere. Although several laboratory investigations of the interaction of HCl with ice surfaces have been conducted, there is still great uncertainty associated with the adsorption isotherms of HCl on ice, which is largely a consequence of most previous studies being unable to work at concentrations relevant for the atmosphere and to explore the non-saturated part of the isotherm at sub-monolayer coverage. We have conducted experiments on HCl uptake on ice surfaces at temperatures between 190 and 220 K, using a coated wall flow tube. HCl at concentrations as low as 2 × 109 molecule cm3 (~10-8 Torr) was detected using a chemical-ionization, quadrupole mass spectrometer. The equilibrium surface coverage of HCl on ice could be interpreted using the Langmuir-model to derive partition coefficients (KLang). We find that the dissociative Langmuir isotherm describes our data significantly better than the non-dissociative type. Surprisingly, and in contrast to the behavior of the majority of traces-gases which adsorb reversibly on ice surfaces, the partition-coefficients we derive for HCl do not show a systematic dependence on temperature, precluding the simple derivation of an adsorption enthalpy and indicating the presence of more complex adsorption and desorption mechanisms for strong acids ionizing on the surface compared to H-bonded trace gases.

  3. Corrosion of alloy 22 in phosphate and chloride containing solutions

    International Nuclear Information System (INIS)

    Alloy C-22 is a Ni-based alloy (22% Cr, 13% Mo, 3% W y 3% Fe in weight per cent) that exhibits an excellent uniform and localized corrosion resistance due to its protective passive film. It was designed to resist the most aggressive environments for industrial applications. Alloy 22 is one of the candidates to be considered for the outer shell of the canister that would contain high level radioactive nuclear wastes. The effect of phosphate ion in chloride containing solutions at 90 C degrees was studied under aggressive conditions were this material might be susceptible to crevice corrosion. The electrolyte solution, which consisted of 1M NaCl and different phosphate concentrations (between 10-3M and 1M), was deoxygenated by bubbling with nitrogen. Electrochemical tests, electron microscope observations (SEM) and energy dispersive spectrometer analysis (EDS) were conducted. Crevice corrosion was not detected and the comparison of the potentiodynamic polarization tests showed an increase of the passivity range in phosphate containing solutions. The passive current value was 1 μA/cm2 approximately in all the tests that were performed in this work. The differences in composition of the anodic film formed on the samples suggest that phosphate is responsible for the increase of the passivity range by incorporation to the passive film. (author)

  4. Creep Behaviour of Wood Flour/Poly(vinyl chloride) Composites

    Institute of Scientific and Technical Information of China (English)

    JIA Mingyin; XUE Ping; ZHAO Yongsheng; WANG Kejian

    2009-01-01

    The experimental creep data were focused on wood-flour(WF)/poly vinyl chloride (PVC)composites with the variations in additive concentrations of wood flour,silane coupling agent, organomodified montmorillonite(OMMT)and nano-cacium carbonate(nano-CaCO_3).Their effects were analyzed using the Four-element Burger Model incorporating microscopic mechanisms.Total creep strain was low with increasing WF while elastic strain was high and plastic flow strain was low in modeling.Modification of WF with silane was beneficial to creep resistance,so did adding low ratio of OMMT(1.5 wt%)and nano-CaCO_3 in composites.Thus,it was effective in reducing creep either by stiffening the PVC matrix using rigid nano-particles or by improving their adhesion with resin.However,superfluous quantity of any additament did not benefit the improvement owing to either earlier destruction of their agglomerates or stress-concentrated cracks in the over-incrassated interface.

  5. Exfoliation of Hexagonal Boron Nitride via Ferric Chloride Intercalation

    Science.gov (United States)

    Hung, Ching-cheh; Hurst, Janet; Santiago, Diana; Rogers, Richard B.

    2014-01-01

    Sodium fluoride (NaF) was used as an activation agent to successfully intercalate ferric chloride (FeCl3) into hexagonal boron nitride (hBN). This reaction caused the hBN mass to increase by approx.100 percent, the lattice parameter c to decrease from 6.6585 to between 6.6565 and 6.6569 ?, the x-ray diffraction (XRD) (002) peak to widen from 0.01deg to 0.05deg of the full width half maximum value, the Fourier transform infrared (FTIR) spectrum's broad band (1277/cm peak) to change shape, and new FTIR bands to emerge at 3700 to 2700 and 1600/cm. This indicates hBN's structural and chemical properties are significantly changed. The intercalated product was hygroscopic and interacted with moisture in the air to cause further structural and chemical changes (from XRD and FTIR). During a 24-h hold at room temperature in air with 100 percent relative humidity, the mass increased another 141 percent. The intercalated product, hydrated or not, can be heated to 750 C in air to cause exfoliation. Exfoliation becomes significant after two intercalation-air heating cycles, when 20-nm nanosheets are commonly found. Structural and chemical changes indicated by XRD and FTIR data were nearly reversed after the product was placed in hydrochloric acid (HCl), resulting in purified, exfoliated, thin hBN products.

  6. Histophysiological study of aluminum chloride effect on male rats

    Directory of Open Access Journals (Sweden)

    K. H. Al-Mallah

    2009-01-01

    Full Text Available This study was designed to detect the effects of aluminum chloride AlCl3 on some pathophysiological features of adult male rats. Eighteen rats were divided to 3 groups of 6 animals each. These included untreated control and 2 treated groups received AlCl3 at the doses 40 and 80 mg/kg of body weight, orally and daily for 30 days. The following parameters were recorded: Body weight (weekly, central nervous system activity tests (weekly, hematological examinations at 15 and 30 days of experimentally and gross and histopathology for brain, liver, kidneys and heart at the day (30. The results showed a significant decrease in body weight mean of 3rd group (80 mg/kg at 4th week, a significant decrease in the activity associated with time progress in experiment by recording (moving onset, square crossed and rearing in 3 minutes, negative geotaxis tests, there were no significant differences between groups at pack cell volume and hemoglobin concentration with a significant decrease in total leukocyte count at 2nd group (40 mg/kg. Differential leukocyte count revealed significant increase in lymphocyte at day 30. Histopathological changes were neuronal vaculation and proliferation of microgelial cells in brain, vacular degeneration and lymphocytic infiltrations in hepatic parenchyma with mild portal fibrosis in liver, at kidneys there were cloudy swelling, coagulative necrosis to the renal tubular epithelium, more severely noticed at 3rd group, no pathological changes were noticed at myocardium and coronary arteries at both treated groups.

  7. The CIC-3 chloride channels in cardiovascular disease

    Institute of Scientific and Technical Information of China (English)

    Dayue Darrel DUAN

    2011-01-01

    CIC-3 is a member of the CIC voltage-gated chloride(Cl-) channel superfamily. Recent studies have demonstrated the abundant expression and pleiotropy of CIC-3 in cardiac atrial and ventricular myocytes, vascular smooth muscle cells, and endothelial cells.CIC-3 Cl- channels can be activated by increase in cell volume, direct stretch of β1-integrin through focal adhesion kinase and many active molecules or growth factors including angiotensin Ⅱ and endothelin-1-mediated signaling pathways, Ca2+/calmodulin-dependent protein kinase Ⅱ and reactive oxygen species. CIC-3 may function as a key component of the volume-regulated Cl- channels, a superoxide anion transport and/or NADPH oxidase interaction partner, and a regulator of many other transporters. CIC-3 has been implicated in the regulation of electrical activity, cell volume, proliferation, differentiation, migration, apoptosis and intracellular pH. This review will highlight the major findings and recent advances in the study of CIC-3 Cl- channels in the cardiovascular system and discuss their important roles in cardiac and vascular remodeling during hypertension, myocardial hypertrophy, ischemia/reperfusion, and heart failure.

  8. Redetermination of 1-carboxy-cyclo-hexan-1-aminium chloride.

    Science.gov (United States)

    Belandria, Lusbely M; Delgado, Gerzon E; Mora, Asiloé J; Seijas, Luis E; González, Teresa

    2009-01-01

    The crystal structure of the title compound, C(7)H(14)NO(2) (+)·Cl(-), was reported previously [Chacko, Srinivasan & Zand (1975 ▶). J. Cryst. Mol. Struct.5, 353-357] from Weissenberg photographic data with R = 0.113. It has now been redetermined, providing a significant increase in the precision of the derived geometric parameters, viz. mean σ(C-C) = 0.003 Å in the present work compared with 0.021 Å for the previous work. The complete cation is generated by crystallographic mirrror symmetry, with three C atoms, two O atoms and the N atom lying on the reflecting plane; the chloride anion also has m site symmetry. The crystal structure is established by a two-dimensional network of O-H⋯Cl and N-H⋯Cl hydrogen bonds, generating C(1) (2)(4) and C(1) (2)(7) chains, and R(2) (4)(8) and R(2) (4)(14) rings. PMID:21581862

  9. Preparation of polymeric aluminium ferric chloride from bauxite tailings

    Directory of Open Access Journals (Sweden)

    Ma D.

    2013-01-01

    Full Text Available Bauxite tailings are the main solid wastes in the ore dressing process. The Al2O3 and Fe2O3 contents in bauxite tailings can reach 50% and 13% respectively. The present study proposed a feasible method to use bauxite tailings to prepare polymeric aluminium ferric chloride (PAFC, a new composite inorganic polymer for water purification. Bauxite tailings roasted reacting with hydrochloric acid under air, pickle liquor which mainly contains Fe3+, Al3+ was generated, then calcium aluminate was used to adjust pH value and the basicity of the pickle liquor, the PAFC was subsequently prepared after the polymerization process. The optimal synthesizing parameters for the preparation of PAFC obtained were as follows: the concentration of hydrochloric acid of 24 wt%, ratio of hydrochloric acid to bauxite tailings of 6:1, temperature of 90ºC, leaching time of 2.5 hours, ration of pickle liquor to calcium aluminate of 12:1, polymerization temperature of 90ºC and polymerization time of about 3 hours. The basicity of PAFC was higher than 68%, the sum concentration of Al2O3 and Fe2O3 was beyond 12.5%. The results of flocculation tests indicate that the PAFC has a better performance of removing the turbidity of wastewater compared to PAC, and PAFC prepared by bauxite tailings is a kind of high quality flocculants.

  10. Electrochemistry of ytterbium (III) in molten alkali metal chlorides

    Energy Technology Data Exchange (ETDEWEB)

    Smolenski, V.; Novoselova, A. [Institute of High-Temperature Electrochemistry, Ural Division, Russian Academy of Science, Ekaterinburg, 620219 (Russian Federation); Osipenko, A. [Research Institute of Atomic Reactors, Dimitrovgrad-10, Ulyanovsk Region, 433010 (Russian Federation); Caravaca, C. [High Level Waste Unit, Nuclear Fission Division, CIEMAT, Madrid, 28040 (Spain); Cordoba, G. de [High Level Waste Unit, Nuclear Fission Division, CIEMAT, Madrid, 28040 (Spain)], E-mail: g.cordoba@ciemat.es

    2008-12-30

    This work presents the electrochemical study of Yb(III) ions in molten alkali metal chlorides in the temperature range 723-1073 K. Transient electrochemical techniques such as linear sweep, cyclic and square wave voltammetry, and potentiometry at zero current have been used to investigate the reduction mechanism, transport parameters and thermodynamic properties of the reaction YbCl{sub 2} + 1/2Cl{sub 2} = YbCl{sub 3} The results obtained show that the reduction reaction Yb(III) + e{sup -} {r_reversible} Yb(II) is reversible being controlled by the rate of the mass transfer. The diffusion coefficient of [YbCl{sub 6}]{sup 3-} complex ions has been determined at different temperatures in the fused eutectic LiCl-KCl, the equimolar NaCl-KCl and the CsCl media. The apparent standard potential of the soluble-soluble redox system Yb(III)/Yb(II) has been obtained by cyclic voltammetry. The influence of the nature of the solvent on the electrochemical and thermodynamic properties of ytterbium compounds is discussed.

  11. Tolerance Test of Eisenia Fetida for Sodium Chloride

    Energy Technology Data Exchange (ETDEWEB)

    Kerr, M.; Stewart, A.J.

    2003-01-01

    Saltwater spills that make soil excessively saline often occur at petroleum exploration and production (E&P) sites and are ecologically damaging. Brine scars appear when produced water from an E&P site is spilled onto surrounding soil, causing loss of vegetation and subsequent soil erosion. Revegetating lands damaged by brine water can be difficult. The research reported here considers earthworms as a bioremedial treatment for increasing the salt mobility in this soil and encouraging plant growth and a healthy balance of soil nutrients. To determine the practical application of earthworms to remediate brine-contaminated soil, a 17-d test was conducted to establish salt tolerance levels for the common compost earthworm (Eisenia fetida) and relate those levels to soil salinity at brine-spill sites. Soil samples were amended with sodium chloride in concentrations ranging from 1 to 15 g/kg, which represent contamination levels at some spill sites. The survival rate of the earthworms was near 90% in all tested concentrations. Also, reproduction was noted in a number of the lower-concentration test replicates but absent above the 3-g/kg concentrations. Information gathered in this investigation can be used as reference in further studies of the tolerance of earthworms to salty soils, as results suggest that E. fetida is a good candidate to enhance remediation at brine-damaged sites.

  12. Statistical testing and distribution for lead chloride toxicity

    Institute of Scientific and Technical Information of China (English)

    John H. Lange

    2005-01-01

    @@ Dear Sir, Graca et al. [1] provided an interesting investigation on the toxicity of lead chloride and sperm development in mice. However, I would like to make a comment on the statistical analysis presented. Table 1 and its results suggest that a comparison of treated (experiment) and control mice were undertaken using the t-test. The authors indicate that they used the t-test along with complementation of ANOVA analysis. It appears that the t-test was used for analysis in Table 1 and ANOVA, as indicated,for Table 2. Use of t-test for comparing three of more groups is not appropriate since this may result in a multiple comparison problem (increasing the type I error rate)[2, 3]. Multiple comparisons can result in the reporting of a P value that is significant (or of lower value) when in actuality it is not. It is better to use, for example, a one-way ANOVA followed by a post-test (post-hoc)which can take into account all comparisons. Other statistical testing can also be employed to control the overall type I error, such as Tukey-HSD (honest significant difference), Scheffe's and Bonferroni-Dunn methods [2].

  13. Hypokalemia as an early index in trimethyltin chloride poisoning

    Institute of Scientific and Technical Information of China (English)

    TangXJ; LiLY

    2002-01-01

    Nowdays,dimethyltin(DMT) is widely used as plastic stabilizers.Trimethyltin chloride(TMT) is the main byproduct of DMT.Our study on SD rats had shown that hypokalemia played a very inportant role in TMT poisoning.The purpose of this paper was to clarify if hypokalemia can be used as an early index of diagnosis,therapy and prevention in TMT intoxication.We analyzed the serum potassium of 169 cases exposed to TMT,from which 123 cases were measured in 24h after the disease was complained.The serum potassium of 96 cases(78%) were below 3.5mmol·L-1.Four cases died with very serious hypokalemia(<2.5mmol·L-1).The lower the serum potassium was,the more serious of symptom would be found.In the recent 3 accidents,we measured the serum potassium as early as possible,and treat with KCl(iv or po) rightly.All of the 95 cases recovered within 1 month.No sequela was found.The available evidence suggested that hypokalemia could be the early clinical signs of TMT intoxication.Injection of KCl early should be the first selected treatment.

  14. Self-assembled hemocompatible coating on poly (vinyl chloride) surface

    International Nuclear Information System (INIS)

    A stable hemocompatible coating was fabricated by consecutive alternating adsorption of iron (III) and two kinds of polysaccharides, heparin (Hep) and dextran sulfate (DS), onto poly (vinyl chloride) (PVC) surfaces via electrostatic interaction. The fluctuation of contact angles with the alternative deposition of iron (III) and polysaccharides verified the progressive buildup of the mulitilayer coating onto the PVC surface. Atomic force microscopy (AFM) analysis revealed that the PVC surfaces were completely masked by iron-polysaccharides multilayer coatings. The activated partial thromboplastin time (APTT) assay showed that both Hep/Fe3+/Hep and DS/Fe3+/Hep coated PVC were less thrombogenic than the uncoated one. Chromogenic assay for heparin activity proved definitively that the inhibition of locally produced thrombin was ascribed to the thromboresistance of the surface-bound heparin. Compared with the unmodified PVC surfaces, iron-polysaccharide multilayer coating presented a drastically reduced adhesion in vitro of platelets, polymorphonuclear neutrophil leukocytes (PMN) and peripheral blood mononuclear cells (PBMC). Interestingly, the DS/Fe3+/Hep coating was found to exhibit higher hydrophilicity and stability, hence lower non-specific protein adsorption in comparison with Hep/Fe3+/Hep coating due to the incorporation of dextran sulfate into the multilayer coating.

  15. Application of cetylpyridinium chloride in dispersion of antibacterial ceramic glaze

    Institute of Scientific and Technical Information of China (English)

    CHAI Li-yuan; CHENG Ming-ming; PENG Bing; HUANG Yi; ZHANG Xiao-fei

    2006-01-01

    The adsorption of cetylpyridinium chloride(CPC) onto a ceramic glaze mixture composed of limestone, feldspar, quartz,kaolin, and antibacterial agent was studied. Both adsorption isothermals and the average particle zeta potential were investigated in order to understand the suspension stability as a function of pH, ionic strength, and surfactant concentration. The results show that under the optimal conditions such as pH value of 7 or 9, 0.01 mol/L of ionic strength and around critical micelle concentration(CMC)of surfactant, antibacterial ceramic glaze acquires fine dispersion stability. The adsorption of CPC on ceramic glaze particles is in accordance with Langmuir model in 0.01mol/L at pH=7 and pH=9. The adsorption of small amounts of cationic CPC onto the primarily negatively charged surfaces of the particles in the pH range of 7-9 produces strong attraction and flocculation due to hydrophobic interactions. High concentration of surfactant under 0.01 mol/L of salt provides high zeta potential, which produces a high stability.

  16. Dielectric breakdown during Cs+ sputtering of polyvinyl chloride

    Science.gov (United States)

    Wahoud, F.; Guillot, J.; Audinot, J. N.; Bertrand, P.; Delcorte, A.; Migeon, H. N.

    2014-02-01

    Thin films of insulating polymers are sometimes analyzed by secondary ion mass spectrometry (SIMS) or by X-ray photoelectron spectroscopy (XPS) without the use of an electron gun. In this work, both SIMS and XPS have been used to study the chemical and structural modifications due to the charge effect during Cs+ sputtering of a thin film of polyvinyl chloride (PVC). The kinetic energy distribution study shows that at a small primary fluence ˜1015 Cs+ ions/cm2, the dielectric breakdown voltage of the PVC film is reached, i.e. the minimum voltage that causes a portion of an insulator to become electrically conductive. XPS study indicates that the conducting phase created in the PVC film after energetic Cs+ bombardment consists of graphitized carbon and metallic cesium clusters. After the dielectric breakdown of the film, the positive charge, previously accumulated on the surface, is neutralized through the conductive regions, which are created in the insulating film. During Cs+ sputtering of a PVC film, the chemical structure of the analyzed surface is completely modified and some ionic bonds such as CsC and CsCl are also created.

  17. [Pyrolysis characteristics of medical waste compositions containing PVC (polyvinyl chloride)].

    Science.gov (United States)

    Deng, Na; Zhang, Yu-Feng; Zhao, Wei; Ma, Hong-Ting; Wei, Li-Li

    2008-03-01

    To obtain pyrolysis characteristics of medical waste compositions containing PVC (polyvinyl chloride), thermogravimetric study of tube for transfusion (TFT) and sample collector for urine (SCFU) was carried out using the thermogravimetric analyser (TGA) with N2. The heat change in pyrolysis process was analyzed and the properties of pyrolysis residues are reported. The mathematics model with two-step and four-reaction was established to simulate the pyrolysis process. The results show that: 1) The pyrolysis mechanism of the two samples is in agreement with that of PVC. The decomposition process appears two stages in 200 - 390 degrees C and 390 - 550 degrees C, which are clearly expressed with two prominent peaks with maximum rate of weight loss at about 315 degrees C and 470 degrees C. 2) Complex ingredients in samples result in irregular and uneven shape of DTG peaks, in which plasticizer lowers the antichloration temperature and enhances the weight loss rate. 3) The model could satisfactorily describe the weight loss and differential process of TFT and SCFU.

  18. Kinetics of Thermal Degradation of Recycled Polyvinyl Chloride Resin

    Directory of Open Access Journals (Sweden)

    I. M. Alwaan

    2014-01-01

    Full Text Available The goal of this study is to find the effect of time and temperature on the thermal degradation of recycled polyvinyl chloride (PVC resin. The isothermal rate of reaction (r of recycled PVC resin was investigated at the following temperatures to: 100, 110, 120, 130, and 140°C at period of times ranging from 10 to 50 min. The result shows that the rate of reaction (r of recycled PVC increases with increasing temperatures. The reaction rate constant (K for temperatures ranging from 100 to 140°C was doubled from 0.028–0.056 mol·L−1·S−1. The process was found to be zero order reaction at all range of temperatures 100–140°C. The activation energy of the thermal weight loss was calculated at different temperatures (E/R = 2739.5°K. The average enthalpy and entropy of reaction at temperature of 298°K were determined.

  19. Stress Corrosion Cracking of an Austenitic Stainless Steel in Nitrite-Containing Chloride Solutions

    Directory of Open Access Journals (Sweden)

    R. K. Singh Raman

    2014-12-01

    Full Text Available This article describes the susceptibility of 316L stainless steel to stress corrosion cracking (SCC in a nitrite-containing chloride solution. Slow strain rate testing (SSRT in 30 wt. % MgCl2 solution established SCC susceptibility, as evidenced by post-SSRT fractography. Addition of nitrite to the chloride solution, which is reported to have inhibitive influence on corrosion of stainless steels, was found to increase SCC susceptibility. The susceptibility was also found to increase with nitrite concentration. This behaviour is explained on the basis of the passivation and pitting characteristics of 316L steel in chloride solution.

  20. Studies on poly (vinyl chloride/silica dioxide composite hollow fiber membrane

    Directory of Open Access Journals (Sweden)

    Mei Shuo

    2016-01-01

    Full Text Available Poly (vinyl chloride/silica dioxide composite hollow fiber membranes were prepared by using the method of immersion-precipitation process. The influences of stretching ratio on the formation of the interfacial microporous of poly (vinyl chloride/silica dioxide composite hollow fiber membranes were specifically investigated by scanning electron microscope, dynamic mechanical analysis, and finite element method. Results show that with the stretching ratio increasing, numerous IFM appear on the surface of membranes. Finite element method actually reflects the dynamic change of microporous structure of poly (vinyl chloride/silica dioxide composite hollow fiber membranes.

  1. Fabrication and Performance of All-Solid-State Chloride Sensors in Synthetic Concrete Pore Solutions

    OpenAIRE

    Gao, Xiaojian; Zhang, Jian; Yang, Yingzi; Deng, Hongwei

    2010-01-01

    One type of all-solid-state chloride sensor was fabricated using a MnO2 electrode and a Ag/AgCl electrode. The potentiometric response of the sensor to chloride in synthetic concrete pore solutions was systematically studied, and the polarization performance was also evaluated. The results show a good linear relationship between the potential reading of the sensor and the logarithm of chloride activity (concentration ranges from 0.05 to 5.0 M), and the potential value remains stable with incr...

  2. Evaluation of chloride/bicarbonate. Exchange in the human colon in vivo.

    OpenAIRE

    Davis, G R; Morawski, S. G.; Santa Ana, C A; Fordtran, J S

    1983-01-01

    During perfusion of a plasma-like solution, colonic absorption rate of chloride was much higher than the secretion rate of bicarbonate (34 vs. 3.5 meq/h, respectively). This might suggest that anion exchange (Cl/HCO3) accounts for only a small fraction of total chloride absorption. However, if the colon absorbs as well as secretes bicarbonate, this reasoning would underestimate the magnitude of the anion exchange. To see if the colon absorbs bicarbonate, we perfused a chloride-free solution (...

  3. Effect of Sodium Chloride on Growth of Staphylococcus aureus in Synthetic Tissue Culture Medium

    OpenAIRE

    出来尾, 哲; 地土井, 襄爾

    1983-01-01

    Staphylococcus aureus Smith was cultured in a synthetic tissue culture medium containing various concentrations of sodium chloride. The growth was at a higher level in the media containing sodium chloride of concentrations of 2.0 and 4.0% than in those of less than 2.0% and more than 4.0%. The result suggests that the bacteria grow more vigorously in the fairly high concentrations of sodium chloride than in the physiological concentration of it, in the synthetic medium. It may be considered t...

  4. Analgesic effect of intrathecal bumetanide is accompanied by changes in spinal sodium-potassium-chloride co-transporter 1 and potassium-chloride co-transporter 2 expression in a rat model of incisional pain

    Institute of Scientific and Technical Information of China (English)

    Yanbing He; Shiyuan Xu; Junjie Huang; Qingjuan Gong

    2014-01-01

    Accumulating evidence has demonstrated that the sodium-potassium-chloride co-transporter 1 and potassium-chloride co-transporter 2 have a role in the modulation of pain transmission at the spinal level through chloride regulation in the pain pathway and by effecting neuronal excitability and pain sensitization. The present study aimed to investigate the analgesic effect of the speciifc sodium-potassium-chloride co-transporter 1 inhibitor bumetanide, and the change in spinal sodium-potassium-chloride co-transporter 1 and potassium-chloride co-transporter 2 expression in a rat model of incisional pain. Results showed that intrathecal bumetanide could decrease cumulative pain scores, and could increase thermal and mechanical pain thresholds in a rat model of incisional pain. Sodium-potassium-chloride co-transporter 1 expression in-creased in neurons from dorsal root ganglion and the deep laminae of the ipsilateral dorsal horn following incision. By contrast, potassium-chloride co-transporter 2 expression decreased in neurons of the deep laminae from the ipsilateral dorsal horn. These ifndings suggest that spinal sodium-potassium-chloride co-transporter 1 expression was up-regulated and spinal potassi-um-chloride co-transporter 2 expression was down-regulated following incision. Intrathecal bumetanide has analgesic effects on incisional pain through inhibition of sodium-potassi-um-chloride co-transporter 1.

  5. Partial replacement of sodium chloride in Italian salami and the influence on the sensory properties and texture

    Directory of Open Access Journals (Sweden)

    Claudia Fieira

    2015-05-01

    Full Text Available Cured meat products, such as Italian salami, exhibit high levels of sodium from NaCl, added to ensure flavor and texture. Studies indicates a close relationship between the consumption of these products and hypertension and cardiovascular diseases. The objective of this study was to evaluate the effect of partial replacement of sodium chloride by potassium chloride, magnesium chloride, and calcium chloride on the texture and sensory attributes of Italian salami and to quantify the levels of minerals in the finished product. Four formulations were prepared: without a starter culture (F1; with a starter culture (F2; partial replacement of 60% sodium chloride by  potassium chloride (F3; and partial replacement of sodium chloride by a mixture containing potassium chloride,  magnesium chloride, and calcium chloride (F4. Analyses of Na+, K+, Ca+2 and Mg+2 contents, texture profile and sensory attributes (acceptance test were carried out. Formulations F1, F2, F3 and F4 presented levels of Na+ 0.53, 0.44, 0.36 and 0.30, respectively. The formulations presented a reduction in the sodium chloride content over 25%, thus complying with the requirements of the current legislation. The addition of these salts affected certain important sensory attributes, such as flavor and global impression, and increased hardness and chewiness values.

  6. Growth Performance, Carcass Characteristics and Plasma Mineral Chemistry as Affected by Dietary Chloride and Chloride Salts Fed to Broiler Chickens Reared under Phase Feeding System

    OpenAIRE

    Mushtaq, M. M. H.; Pasha, T.N.; M. Akram; Mushtaq, T.; R Parvin; Choi, H. C.; Hwangbo, J.; Kim, J. H.

    2013-01-01

    Requirements of dietary chloride (dCl) and chloride salts were determined by using 4×2 factorial arrangement under four phase feeding program. Four levels (0.31, 0.45, 0.59 and 0.73%) and two sources (NH4Cl and CaCl2) of the dCl were allocated to 1,472 chicks in eight dietary treatments in which each treatment was replicated four times with 46 birds per replicate. The four phase feeding program was comprised of four dietary phases: Prestarter (d 1 to 10), Starter (d 11 to 20), Grower (d 21 to...

  7. HEPARIN OR 0.9% SODIUM CHLORIDE TO MAINTAIN CENTRAL VENOUS CATHETER PATENCY: A RANDOMISED TRIAL

    Directory of Open Access Journals (Sweden)

    Mahesh Babu

    2014-01-01

    Full Text Available BACKGROUND: Maintaining the lumen patency of Central venous catheters (CVCsusing low dose Heparin is recommended in many guidelines of CVC maintenance. This study is to compare the efficacy of low - dose Heparin 3ml (10U/ml and 0.9% Sodium chloride (10ml flush solutions to maintain Centra l venous catheter (CVC lumen patency. METHODS: We s tudied 100 adult patients between March 2012 and August 2012 who required short - term CVC insertion to compare two flush solutions , Heparin and0.9% Sodium Chloride on catheter lumen patency . RESULTS : The crude catheter non patency was 4% ( two lumensin Heparin group and 8% (four lumens in the Sodium Chloride group . There was no incidence of thrombocytopenia in both the study groups. CONCLUSION : This study has demonstrated no significant difference bet ween Heparin and 0.9% Sodium Chloride flushes with regards to catheter patency in adult patients with short - term use of CVCs .

  8. Renin release from permeabilized juxtaglomerular cells is stimulated by chloride but not by low calcium

    DEFF Research Database (Denmark)

    Jensen, B L; Skøtt, O

    1994-01-01

    M]. These maneuvers had no effect on renin release, while 1.5 mM calcium caused a stimulation, which was not inhibited by 50 mM sucrose. Isosmotic increases in the chloride concentration to 25, 60, and 132 mM resulted in prompt stimulations of renin release. Similarly, iodide and nitrate stimulated renin release. We...... of chloride channels followed by a drop in the intracellular chloride concentration. The stimulation caused by the high calcium concentration may be a toxic effect or may be due to stimulation of the fusion between granules and cell membrane in a way analogous to other secretory cells.......The intracellular concentrations of calcium and chloride have been suggested to be involved in the control of renin secretion from juxtaglomerular (JG) cells. We have tested these propositions on permeabilized JG cells. Rat glomeruli with attached JG cells were isolated by the magnetic iron...

  9. Field and laboratory determination of a poly(vinyl/vinylidene chloride) additive in brick mortar.

    Science.gov (United States)

    Law, S L; Newman, J H; Ptak, F L

    1990-02-01

    A polymerized vinyl/vinylidene chloride additive, used in brick mortar during the 60s and 70s, is detected at the building site by the field method, which employs a commercially available chloride test strip. The field test results can then be verified by the laboratory methods. In one method, total chlorine in the mortar is determined by an oxygen-bomb method and the additive chloride is determined by difference after water-soluble chlorides have been determined on a separate sample. In the second method, the polymerized additive is extracted directly from the mortar with tetrahydrofuran (THF). The difference in weight before and after extraction of the additive gives the weight of additive in the mortar. Evaporation of the THF from the extract leaves a thin film of the polymer, which gives an infrared "fingerprint" spectrum characteristic of the additive polymer.

  10. Corrosion sensor for monitoring the service condition of chloride-contaminated cement mortar.

    Science.gov (United States)

    Lu, Shuang; Ba, Heng-Jing

    2010-01-01

    A corrosion sensor for monitoring the corrosion state of cover mortar was developed. The sensor was tested in cement mortar, with and without the addition of chloride to simulate the adverse effects of chloride-contaminated environmental conditions on concrete structures. In brief, a linear polarization resistance method combined with an embeddable reference electrode was utilized to measure the polarization resistance (Rp) using built-in sensor electrodes. Subsequently, electrochemical impedance spectroscopy in the frequency range of 1 kHz to 50 kHz was used to obtain the cement mortar resistance (Rs). The results show that the polarization resistance is related to the chloride content and Rs; ln (Rp) is linearly related to the Rs values in mortar without added chloride. The relationships observed between the Rp of the steel anodes and the resistance of the surrounding cement mortar measured by the corrosion sensor confirms that Rs can indicate the corrosion state of concrete structures.

  11. Mechanical properties of cement mortar in sodium sulfate and sodium chloride solutions

    Institute of Scientific and Technical Information of China (English)

    熊良宵; 虞利军

    2015-01-01

    To investigate the mechanical properties of cement mortar in sodium sulfate and sodium chloride solutions, uniaxial compression test and ultrasonic test were performed. Test results show that the relative dynamic elastic modulus, the mass variation, and the compressive strength of cement mortar increase first, and then decrease with increasing erosion time in sodium sulfate and sodium chloride solutions. The relative dynamic elastic moduli and the compressive strengths of cement mortars with water/cement ratios of 0.55 and 0.65 in sodium sulfate solution are lower than those in sodium chloride solution with the same concentration at the 420th day of immersion. The compressive strength of cement mortar with water/cement ratio of 0.65 is more sensitive to strain rate than that with water/cement ratio of 0.55. In addition, the strain-rate sensitivity of compressive strength of cement mortar will increase under attacks of sodium sulfate or sodium chloride solution.

  12. The effect on serum enzymes of intramuscular injections of digoxin, bumetanide, pentazocine and isotonic sodium chloride

    DEFF Research Database (Denmark)

    Andersen, Klaus Ejner; Damsgaard, T

    1976-01-01

    Intramuscular injections of digoxin, bumetanide, pentazocine or isotonic sodium chloride have been given to 39 patients. We followed the serum concentrations of creatine kinase (CK), aspartate aminotransferase (ASAT), lactate dehydrogenase (LDH) and LDH isoenzymes for 4 days. Ten patients receivi...

  13. Chloride-Anion-Templated Synthesis of a Strapped-Porphyrin-Containing Catenane Host System.

    Science.gov (United States)

    Brown, Asha; Langton, Matthew J; Kilah, Nathan L; Thompson, Amber L; Beer, Paul D

    2015-12-01

    The synthesis, structure and anion-recognition properties of a new strapped-porphyrin-containing [2]catenane anion host system are described. The assembly of the catenane is directed by discrete chloride anion templation acting in synergy with secondary aromatic donor-acceptor and coordinative pyridine-zinc interactions. The [2]catenane incorporates a three-dimensional, hydrogen-bond-donating anion-binding pocket; solid-state structural analysis of the catenane⋅chloride complex reveals that the chloride anion is encapsulated within the catenane's interlocked binding cavity through six convergent CH⋅⋅⋅⋅Cl and NH⋅⋅⋅Cl hydrogen-bonding interactions and solution-phase (1) H NMR titration experiments demonstrate that this complementary hydrogen-bonding arrangement facilitates the selective recognition of chloride over larger halide anions in DMSO solution. PMID:26508679

  14. Taste aversion learning produced by combined treatment with subthreshold radiation and lithium chloride

    International Nuclear Information System (INIS)

    These experiments were designed to determine whether treatment with two subthreshold doses of radiation or lithium chloride, either alone or in combination, could lead to taste aversion learning. The first experiment determined the thresholds for a radiation-induced taste aversion at 15-20 rad and for lithium chloride at 0.30-0.45 mEq/kg. In the second experiment it was shown that exposing rats to two doses of 15 rad separated by up to 3 hr produced a taste aversion. Treatment with two injections of lithium chloride (0.30 mEq/kg) did not produce a significant reduction in preference. Combined treatment with radiation and lithium chloride did produce a taste aversion when the two treatments were administered within 1 hr of each other. The results are discussed in terms of the implications of these findings for understanding the nature of the unconditioned stimuli leading to the acquisition of a conditioned taste aversion

  15. Effect of NGBFS and CBA as fine aggregate on the chloride permeability of concrete

    Directory of Open Access Journals (Sweden)

    İsa Yüksel

    2013-09-01

    Full Text Available This paper presents the results of an investigation which was about influence of non-ground Coal Bottom Ash (CBA and Non-Ground Granulated Blast-Furnace Slag (NGBFS as fine aggregate on rapid chloride permeability of concrete. Series of Rapid Chloride Permeability Test (RCPT were conducted with concrete specimens containing NGBFS and CBA in varying percentages from 10 to 50% with the step of 10% of fine aggregate by weight. Two basic series concrete specimens were prepared in laboratory. The first series (G was contained NGBFS, the second series (B was contained CBA as fine aggregate. Test results indicated that NGBFS or CBA improves the resistance to chloride ion penetration tosome extent. 30% and 10% replacement ratios were selected as optimum replacement ratios for G and B series. It was concluded that GBFS was more impressive then CBA for blocking chloride ion movements.

  16. Organometallic complexes of thiocarbanilides and substituted thiocarbanilides using manganese (II) chloride

    International Nuclear Information System (INIS)

    Organo-metallic complexes of substituted thiocarbanilide using manganese (II) chloride were prepared, these are: (VIII) 3:3'-Dichloro thiocarbanilide. Manganese (II) chloride. (IX) 3:3'-Dimethyl thiocarbanilide. Manganese (II) chloride. (X) 2:2'-dimethyl thiocarbanilide. Manganese (II) chloride. These compounds are coloured, soluble in most organic solvents, insoluble in water, decomposed by hot solvents. The physical properties of compounds (IX) and (X) were studied by UV and IR spectra, and the physical properties of compound (VIII) were studied by UV, IR, mass spectra and NMR. The molecular weight of the compound (VIII) was determined by three different methods; Rast's camphor method, mass spectra and the nitrogen contents. The stoichiometry of the reaction was found to be 2:1, and the coordination is from sulphur atom more than nitrogen.(Author)

  17. Warm season chloride concentrations in stream habitats of freshwater mussel species at risk.

    Science.gov (United States)

    Todd, Aaron K; Kaltenecker, M Georgina

    2012-12-01

    Warm season (May-October) chloride concentrations were assessed in stream habitats of freshwater mussel species at risk in southern Ontario, Canada. Significant increases in concentrations were observed at 96% of 24 long-term (1975-2009) monitoring sites. Concentrations were described as a function of road density indicating an anthropogenic source of chloride. Linear regression showed that 36% of the variation of concentrations was explained by road salt use by the provincial transportation ministry. Results suggest that long-term road salt use and retention is contributing to a gradual increase in baseline chloride concentrations in at risk mussel habitats. Exposure of sensitive mussel larvae (glochidia) to increasing chloride concentrations may affect recruitment to at risk mussel populations.

  18. Potentiometric titration of uranium reduced by chromic salts in chloridic solutions

    International Nuclear Information System (INIS)

    The utilization of chromic salts for reducing the uranium (VI) from chloridic solutions, for potentiometric dosage is described. This method is used in the range of 0,002 to 1,0 M of uranium. (C.G.C.)

  19. Variable selectivity of the Hitachi chemistry analyzer chloride ion-selective electrode toward interfering ions.

    Science.gov (United States)

    Wang, T; Diamandis, E P; Lane, A; Baines, A D

    1994-02-01

    Chloride measurements by ion-selective electrodes are vulnerable to interference by anions such as iodide, thiocyanate, nitrate, and bromide. We have found that the degree of interference of these anions on the Hitachi chemistry analyzer chloride electrode varies from electrode to electrode and this variation can even occur within the same lot of membrane. This variation is not dependent upon the length of time the cartridge has been in the analyzer because no correlation existed between the usage time and the electrode response to interfering ions. Neither is this variation due to the deterioration of the electrode because all electrodes tested had calibration slopes within the manufacturer's specification. Our study, however, showed that even after repeated exposure to a plasma sample containing 2 mM thiocyanate, the chloride electrode was still able to accurately measure the chloride in plasma without thiocyanate, thus confirming that a carryover effect does not exist from a previous thiocyanate-containing sample.

  20. Selective removal of iron contaminations from zinc-chloride melts by cementation with zinc

    Science.gov (United States)

    Devilee, R. A.; van Sandwijk, A.; Reuter, M. A.

    1999-08-01

    An investigation into the cementation of iron chloride from a zinc-chloride melt at 400 °C has been carried out with zinc powder. The variables studied include preparation of the chloride melt and the amount of zinc added. The effect of lead, copper, and cadmium on cementation of iron has also been investigated. According to the results, it is possible to reduce the iron concentration in zinc-chloride melts to 20 ppm with a small excess of zinc. The preparation of the melt proved to be very important. Insufficient purification of the melt with respect to oxides, hydroxides, and water resulted in a low reaction rate and high residual iron concentration.

  1. Corrosion of steel in cracked concrete: Chloride microanalysis and service life predictions

    NARCIS (Netherlands)

    Pacheco Farias, J.

    2015-01-01

    Reinforcement corrosion is frequently considered as the predominant degradation mechanism affecting reinforced concrete structures. Reinforced concrete structures are commonly subject to harsh environmental and loading conditions in which aggressive species can penetrate. Chlorides, present in seaw

  2. Corrosion Resistance of Calcium Aluminate Cement Concrete Exposed to a Chloride Environment

    Directory of Open Access Journals (Sweden)

    Ki Yong Ann

    2014-01-01

    Full Text Available The present study concerns a development of calcium aluminate cement (CAC concrete to enhance the durability against an externally chemically aggressive environment, in particular, chloride-induced corrosion. To evaluate the inhibition effect and concrete properties, CAC was partially mixed with ordinary Portland cement (OPC, ranging from 5% to 15%, as a binder. As a result, it was found that an increase in the CAC in binder resulted in a dramatic decrease in the setting time of fresh concrete. However, the compressive strength was lower, ranging about 20 MPa, while OPC indicated about 30–35 MPa at an equivalent age. When it comes to chloride transport, there was only marginal variation in the diffusivity of chloride ions. The corrosion resistance of CAC mixture was significantly enhanced: its chloride threshold level for corrosion initiation exceeded 3.0% by weight of binder, whilst OPC and CAC concrete indicated about 0.5%–1.0%.

  3. Effectiveness of inhibitors in increasing chloride threshold value for steel corrosion

    Directory of Open Access Journals (Sweden)

    Jin-xia XU

    2013-07-01

    Full Text Available This investigation was aimed at evaluating the effectiveness of corrosion inhibitors in increasing the chloride threshold value for steel corrosion. Three types of corrosion inhibitors, calcium nitrite (Ca(NO22, zinc oxide (ZnO, and N,N'-dimethylaminoethanol (DMEA, which respectively represented the anodic inhibitor, cathodic inhibitor, and mixed inhibitor, were chosen. The experiment was carried out in a saturated calcium hydroxide (Ca(OH2 solution to simulate the electrolytic environment of concrete. The inhibitors were initially mixed at different levels, and then chloride ions were gradually added into the solution in several steps. The open-circuit potential (Ecorr and corrosion current density (Icorr determined by electrochemical impedance spectra (EIS were used to identify the initiation of active corrosion, thereby determining the chloride threshold value. It was found that although all the inhibitors were effective in decreasing the corrosion rate of steel reinforcement, they had a marginal effect on increasing the chloride threshold value.

  4. Method of effective evaluation for examination of chloride ion in concrete

    Institute of Scientific and Technical Information of China (English)

    SUNG Wen-pei; CHEN Kuen-suan; LIN Hsue-chun

    2005-01-01

    The chloride ion contained in reinforced concrete seriously corrodes the steel surface and damages concrete, resulting in inferior reinforced concrete that strength seriously compromises the entire structure's safety. Consequently, the examination of chloride ions contained in reinforced concrete becomes an important part of a complete quality control procedure. To effectively check the concentration of chloride ions in concrete, the evaluation process should be accurate and precise. Laboratory data obtained using existing evaluation methods for the examination of chloride ion are not sufficiently objective to yield reliable results with accuracy and consistency for each sample. An evaluation algorithm with capability to define indices of precision degree (Ep)and accuracy degree (Ea) is presented in this paper. The authors established a statistically reliable index of unbiased estimators and equations to critically examine the laboratory methods' precision, accuracy degrees and application value for measuring chlorine ion concentration in reinforced concrete.

  5. Durability of Steel Fibres Reinforcement Concrete Beams in Chloride Environment Combined with Inhibitor

    Directory of Open Access Journals (Sweden)

    AbdelMonem Masmoudi

    2016-01-01

    Full Text Available This paper presented the effect of the combination of an inhibitor and steel fibre reinforced concrete (SFRC for concrete structures in chloride environments. Twelve beams were cast and tested to study their flexural behavior. The morphology of steel surfaces using the inhibitor after observing the scanning electron microscope showed a low layer of corrosion products. The steel surface immersed in the inhibitor free solution was seen to have been subject to chloride ions attacks as shown in this study. The interest to the field of the present study is the relatively higher durability of the performance when using the inhibitor. Crack width and crack spacing for beams under the same load showed that the use of SFRC with the inhibitor for concrete structures in chloride environments must have transferred tension across cracks that led to reducing crack spacing without any chloride ions attack.

  6. A General Palladium-Catalyzed Hiyama Cross-Coupling Reaction of Aryl and Heteroaryl Chlorides.

    Science.gov (United States)

    Yuen, On Ying; So, Chau Ming; Man, Ho Wing; Kwong, Fuk Yee

    2016-05-01

    A general palladium-catalyzed Hiyama cross-coupling reaction of aryl and heteroaryl chlorides with aryl and heteroaryl trialkoxysilanes by a Pd(OAc)2 /L2 catalytic system is presented. A newly developed water addition protocol can dramatically improve the product yields. The conjugation of the Pd/L2 system and the water addition protocol can efficiently catalyze a broad range of electron-rich, -neutral, -deficient, and sterically hindered aryl chlorides and heteroaryl chlorides with excellent yields within three hours and the catalyst loading can be down to 0.05 mol % Pd for the first time. Hiyama coupling of heteroaryl chlorides with heteroaryl silanes is also reported for the first time. The reaction can be easily scaled up 200 times (100 mmol) without any degasification and purification of reactants; this facilitates the practical application in routine synthesis.

  7. Chloride diffusivity in red mud-ordinary portland cement concrete determined by migration tests

    Directory of Open Access Journals (Sweden)

    Daniel Véras Ribeiro

    2011-01-01

    Full Text Available Red mud, which is a solid waste produced in the alumina production process, is classified as dangerous due to its high pH. In this work, the concentration of chlorides was monitored by measuring the conductivity of the anolyte, which initially was distilled water. The steady and nonsteady-state chloride diffusion coefficients were estimated from the "time lag"� and "equivalent time" between diffusion and migration experiments. The capillary water absorption, apparent porosity and pore size distribution of concretes were also analyzed. The addition of red mud apparently ensured lower chloride diffusion in the tested mixtures due to its superfine particle-size distribution and its "filler"� effect. Red mud lengthened the service life of the concrete to 35 years (double that of the reference concrete. This finding is very positive since it indicates a delay in the onset of the rebar corrosion process caused by the migration of chloride ions.

  8. COMPARISON OF ROCURONIUM BROMIDE AND SUCCINYLCHOLINE CHLORIDE FOR USE DURING RAPID SEQUENCE INTUBATION IN ADULTS

    Directory of Open Access Journals (Sweden)

    Ch. Penchalaiah

    2015-08-01

    Full Text Available BACKGROUND AND OBJECTIVE : The goal of rapid sequence intubation is to secure the patients airway smoothly and quickly, minimizing the chances of regurgitation and aspiration of gastric contents. Traditionally succinylcholine chloride has been the neuromuscular blocking drug of choi ce for use in rapid sequence intubation because of its rapid onset of action and profound relaxation. Succinylcholine chloride remains unsurpassed in providing ideal intubating conditions. However the use of succinylcholine chloride is associated with many side effects like muscle pain, bradycardia, hyperkalaemia and rise in intragastric and intraocular pressure. Rocuronium bromide is the only drug currently available which has the rapidity of onset of action like succinylcholine chloride. Hence the present study was undertaken to compare rocuronium bromide with succinylcholine chloride for use during rapid sequence intubation in adult patients. METHODOLOGY : The study population consisted of 90 patients aged between 18 - 60 years posted for various elective su rgeries requiring general anaesthesia . S tudy population was randomly divided into 3 groups with 30 patients in each sub group. 1. Group I : Intubated with 1 mg kg - 1 of succinylcholine chloride (n=30 . 2. Grou p II : Intubated with rocuronium bromide 0.6 mg kg - 1 (n=30 . 3. Group III : Intubated with rocuronium bromide 0.9 mg kg - 1 (n=30 . Intubating conditions were assessed at 60 seconds based on the scale adopted by Toni Magorian et al. 1993. The haemodynamic para meters in the present study were compared using p - value obtained from student t - test . RESULTS : It was noted that succinylcholine chloride 1 mg kg - 1 body weight produced excellent intubating conditions in all patients. Rocuronium bromide 0.6 mg kg - 1 body we ight produced excellent intubating conditions in 53.33% of patients but produced good to excellent intubating conditions in 96.67% of patients. Rocuronium bromide 0.9 mg kg - 1

  9. Development of oxybutynin chloride topical gel for overactive bladder

    Directory of Open Access Journals (Sweden)

    Lucente VR

    2011-04-01

    Full Text Available Vincent R Lucente1, David R Staskin2, Elise De31Institute of Female Pelvic Medicine and Reconstructive Surgery, Allentown, PA, USA; 2Division of Urology, St Elizabeth’s Medical Center, Tufts University School of Medicine, Boston, MA, USA; 3Urological Institute of Northeastern New York, Albany, NY, USAAbstract: Overactive bladder (OAB is an age-related syndrome often associated with urinary incontinence. Symptoms of OAB, such as urgency, frequency, and nocturia, can be treated effectively with inhibitors of muscarinic acetylcholine receptors. Antimuscarinic agents promote relaxation of the detrusor muscle and may modulate afferent neuronal signals involved in the regulation of the micturition reflex. Despite the availability of an increasing number of oral antimuscarinic agents, treatment persistence among patients with OAB generally appears to be low. This may be attributed, at least in part, to the common occurrence of anticholinergic adverse effects, such as dry mouth, constipation, and dizziness. Oxybutynin is a well-established antimuscarinic agent that is available in a variety of formulations. Transdermal formulations have been developed to avoid the first-pass hepatic and gastrointestinal drug metabolism responsible for the anticholinergic adverse effects often observed with oral delivery of oxybutynin. Oxybutynin chloride topical gel (OTG is a formulation of oxybutynin that was approved by the US Food and Drug Administration in January 2009. OTG was the result of a systematic evidence-based effort to develop a formulation that preserves the efficacy of oral oxybutynin formulations while eliminating most of their anticholinergic adverse effects. Additional emphasis was put on creating a transdermal formulation with minimal potential for application-site skin reactions. The formulation and pharmacokinetic properties of OTG are reviewed in the context of recently published efficacy and tolerability data from a large multicenter, placebo

  10. Optimal control of batch emulsion polymerization of vinyl chloride

    Energy Technology Data Exchange (ETDEWEB)

    Damslora, Andre Johan

    1998-12-31

    The highly exothermic polymerization of vinyl chloride (VC) is carried out in large vessels where the heat removal represents a major limitation of the production rate. Many emulsion polymerization reactors are operated in such a way that a substantial part of the heat transfer capacity is left unused for a significant part of the total batch time. To increase the reaction rate so that it matches the heat removal capacity during the course of the reaction, this thesis proposes the use of a sufficiently flexible initiator system to obtain a reaction rate which is high throughout the reaction and real-time optimization to compute the addition policy for the initiator. This optimization based approach provides a basis for an interplay between design and control and between production and research. A simple model is developed for predicting the polymerization rate. The model is highly nonlinear and open-loop unstable and may serve as an interesting case for comparison of nonlinear control strategies. The model is fitted to data obtained in a laboratory scale reactor. Finally, the thesis discusses optimal control of the emulsion polymerization reactor. Reduction of the batch cycle time is of major economic importance, as long as the quality parameters are within their specifications. The control parameterization had a major influence on the performance. A differentiable spline parameterization was applied and the optimization is illustrated in a number of cases. The best performance is obtained when the reactor temperature is obtained when the optimization is combined with some form of closed-loop control of the reactor temperature. 112 refs., 48 figs., 4 tabs.

  11. Polyvinyl chloride plastisol breast phantoms for ultrasound imaging.

    Science.gov (United States)

    de Carvalho, Isabela Miller; De Matheo, Lucas Lobianco; Costa Júnior, José Francisco Silva; Borba, Cecília de Melo; von Krüger, Marco Antonio; Infantosi, Antonio Fernando Catelli; Pereira, Wagner Coelho de Albuquerque

    2016-08-01

    Ultrasonic phantoms are objects that mimic some features of biological tissues, allowing the study of their interactions with ultrasound (US). In the diagnostic-imaging field, breast phantoms are an important tool for testing performance and optimizing US systems, as well as for training medical professionals. This paper describes the design and manufacture of breast lesions by using polyvinyl chloride plastisol (PVCP) as the base material. Among the materials available for this study, PVCP was shown to be stable, durable, and easy to handle. Furthermore, it is a nontoxic, nonpolluting, and low-cost material. The breast's glandular tissue (image background) was simulated by adding graphite powder with a concentration of 1% to the base material. Mixing PVCP and graphite powder in differing concentrations allows one to simulate lesions with different echogenicity patterns (anechoic, hypoechoic, and hyperechoic). From this mixture, phantom materials were obtained with speed of sound varying from 1379.3 to 1397.9ms(-1) and an attenuation coefficient having values between 0.29 and 0.94dBcm(-1) for a frequency of 1MHz at 24°C. A single layer of carnauba wax was added to the lesion surface in order to evaluate its applicability for imaging. The images of the phantoms were acquired using commercial ultrasound equipment; a specialist rated the images, elaborating diagnoses representative of both benign and malignant lesions. The results indicated that it was possible to easily create a phantom by using low-cost materials, readily available in the market and stable at room temperature, as the basis of ultrasonic phantoms that reproduce the image characteristics of fatty breast tissue and typical lesions of the breast. PMID:27153374

  12. Electrochemical extraction of samarium from molten chlorides in pyrochemical processes

    Energy Technology Data Exchange (ETDEWEB)

    Castrillejo, Y., E-mail: ycastril@qa.uva.es [QUIANE/Dept Quimica Analitica, F. de Ciencias, Universidad de Valladolid, Prado de la Magdalena s/n, 47005 Valladolid (Spain); Fernandez, P. [QUIANE/Dept Quimica Analitica, F. de Ciencias, Universidad de Valladolid, Prado de la Magdalena s/n, 47005 Valladolid (Spain); Medina, J. [Dept Fisica Materia Condensada Cristalografia y Mineralogia, F. de Ciencias, Universidad de Valladolid, Prado de la Magdalena s/n, 47005 Valladolid (Spain); Hernandez, P. [Centro de Investigaciones Quimicas, Universidad Autonoma del Estado de Hidalgo, Carr. Pachuca-Tulancingo Km. 4.5, C.P. 42076 Pachuca, Hidalgo (Mexico); Barrado, E. [QUIANE/Dept Quimica Analitica, F. de Ciencias, Universidad de Valladolid, Prado de la Magdalena s/n, 47005 Valladolid (Spain)

    2011-10-01

    This work concerns the electrochemical extraction of samarium from molten chlorides. In this way, the electrochemical behaviour of samarium ions has been investigated in the eutectic LiCl-KCl at the surface of tungsten, aluminium and aluminium coated tungsten electrodes. On a W inert electrode the electro-reduction of Sm(III) takes place in only one soluble-soluble electrochemical step Sm(III)/Sm(II). The electrochemical system Sm(II)/Sm(0) has not been observed within the electrochemical window, because of the prior reduction of Li(I) ions from the solvent, which inhibits the electro-extraction of Sm species from the salt on such a substrate. Sm metal in contact with the melt react to give Li(0) according to the reaction: Sm(0) + 2Li(I) {r_reversible} Sm(II) + 2Li(0). On the contrary, on reactive Al electrodes the electrochemical system Sm(II)/Sm(0) was observed within the electroactive range. The potential shift of the redox couple is caused by the decrease of Sm activity in the metal phase due to the formation of Sm-Al alloys at the interface. The formation mechanism of the intermetallic compounds was studied in a melt containing: (i) both Sm(III) and Al(III) ions, using W and Al coated tungsten electrodes, and (ii) Sm(III) ions using an Al electrode. Analysis of the samples after potentiostatic electrolysis by X-ray diffraction and scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDS), allowed the identification of Al{sub 3}Sm and Al{sub 2}Sm.

  13. Optimization and application of the gas-diffusion flow injection method for the determination of chloride

    OpenAIRE

    PREDRAG POLIC; SNEZANA NIKOLIC-MANDIC; ALEKSANDAR LOLIC

    2001-01-01

    A selective and sensitive procedure for the fast and indirect determination of chloride by the gas-diffusion FIA method has been optimized and applied for the determination of chloride in water samples which contained different amounts of the analyte. The examined samples were: seawater, tap water and very pure water from the water-steam system of the power plant Nikola Tesla B in Obrenovac. Application of an amperometric detector (model LC-17A; BAS, West Lafayette, USA) enables the detection...

  14. Improvement of the durability of concrete with recycled aggregates in chloride exposed environment

    OpenAIRE

    Vázquez Ramonich, Enric; Barra Bizinotto, Marilda; Aponte Hernández, Diego Fernando; Jiménez Fernández, Cristian Gonzalo; Valls del Barrio, Susanna

    2014-01-01

    Recycled aggregates concrete (RAC) becomes an important participant in recycled materials, although there are still questionable issues about some of its properties. Durability of RAC and its relationship with recycled concrete aggregate (RCA) is often discussed, especially in relation with chloride penetration and diffusion properties. An extensive experimental campaign was performed in order to evaluate the effect of RCA content in the retention and diffusion of chlorides in RAC. The influe...

  15. Evaluating capacitive deionization for water desalination by direct determination of chloride ions

    OpenAIRE

    Díaz Baizán, Patricia; González Arias, Zoraida; Granda Ferreira, Marcos; Menéndez López, Rosa María; Santamaría Ramírez, Ricardo; Blanco Rodríguez, Clara

    2014-01-01

    Ionic conductivity and capacitance measurements are widely used methods for evaluating the desalination efficiency in capacity deionization processes. In this study, these methods are revised and several problems associated to them are identified and evaluated. Furthermore, a new method based on the determination of the chloride ion concentration by means of a chloride selective electrode is proposed as a more reliable alternative for evaluating the desalination performance in these systems. ...

  16. Online Monitoring of Vinyl Chloride Polymerization in a Microreactor Using Raman Spectroscopy

    OpenAIRE

    Dorobantu, Ioana-Miruna; Prat, Laurent E.; Xuereb, Catherine; Gourdon, Christophe; Lasuye, Thierry

    2012-01-01

    International audience A novel capillary-based microfluidic device has been designed to follow the vinyl chloride polymerization reaction. The use of a co-flow generation system enabled obtaining monodisperse vinyl chloride droplets within 200 µm in diameter, each one being considered as a polymerization reactor. During polymerization VCM droplets were visualized with a high speed camera. At the end of the reaction PVC grains were observed with a Scanning Electron Microscopy technique. Rea...

  17. Allergic contact dermatitis to panthenol and cocamidopropyl PG dimonium chloride phosphate in a facial hydrating lotion.

    Science.gov (United States)

    Roberts, Hugh; Williams, Jason; Tate, Bruce

    2006-12-01

    Dexpanthenol is the alcohol corresponding to pantothenic acid (the water-soluble vitamin B(5)). Although it is a common ingredient in many pharmaceuticals and cosmetics, contact allergy is relatively uncommon. Cocamidopropyl PG dimonium chloride phosphate is a phospholipid complex derived from pure coconut oil, and contact allergy is rare. We report a case of allergic contact dermatitis to panthenol and cocamidopropyl PG dimonium chloride phosphate in a facial hydrating lotion. PMID:17101018

  18. Inclusion polymerization of vinyl chloride monomer in deoxycholic acid host via {gamma}-ray irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Chirachanchai, S.; Kumkrong, A. [The Petroleum and Petrochemical College, Chulalongkorn University, Bangkok (Thailand); Ishida, Hatsuo [Department of Macromolecular Science, Case Western Reserve University, Cleveland, OH (United States)

    2000-03-01

    Inclusion polymerization of vinyl chloride monomer (VCM) was studied in the system of 3{alpha}, 12{alpha} -dihydroxy-5{beta}-cholan-24-oic acid (deoxycholic acid, DCA). DCA-VCM inclusion compound system was originally prepared by guest intercalation technique in DCA guest free crystal. The inclusion polymerization of DCA-VCM by {gamma}-irradiation at total dose 2 Mrad, gives a syndiotactic rich polyvinyl chloride (PVC) as can be confirmed by FT-IR and FT-NMR. (author)

  19. POLYMER-SUPPORTED LEWIS ACID CATALYSTS. VI. POLYSTYRENE-BONDED STANNIC CHLORIDE CATALYST

    Institute of Scientific and Technical Information of China (English)

    RAN Ruicheng; FU Diankui

    1991-01-01

    A polystyrene-bonded stannic chloride catalyst was synthesized by the method of lithium polystyryl combined with stannic chloride. This catalyst is a polymeric organometallic compound containing 0.25 mmol Sn(IV)/g catalyst. The catalyst showed sufficient stability and catalytic activity in organic reaction such as esterification, acetalation and ketal formation, and it could be reused many times without losing its catalytic activity.

  20. Interaction of indium and tin oxides mixture with chloride in the presence of sulfur dioxide

    International Nuclear Information System (INIS)

    Investigation into chemical sublimation of indium and tin chlorides from equimolar mixture of the respective oxides under the atmosphere of chloride and mixture of chlorine and sulfur dioxide at 550-700 deg C is carried out. Mutual effect of indium and tin oxides conducted via gas phase is shown to result in growth of the rate of chloridosublimation of both metals. 6 refs.; 4 figs.; 1 tab

  1. The Influence of Dopants on Copper Chloride Catalysts for Ethylene Oxychlorination Reaction

    OpenAIRE

    2013-01-01

    The main aim of this Ph.D. project was to study, understand and improve the current knowledge on the Cu-based catalytic reaction in the conversion of ethylene-to-1,2-dichloroethane (oxychlorination), a crucial intermediate reaction to produce PVC (poly-vinyl chloride) plastic, a second largest commodity. The main concerns of the catalyst (Copper chloride supported on a porous alumina support) are loss of the catalyst (deactivation) and getting 100% desired product (selectivity). Deactivation ...

  2. Glucose stimulates calcium-activated chloride secretion in small intestinal cells.

    Science.gov (United States)

    Yin, Liangjie; Vijaygopal, Pooja; MacGregor, Gordon G; Menon, Rejeesh; Ranganathan, Perungavur; Prabhakaran, Sreekala; Zhang, Lurong; Zhang, Mei; Binder, Henry J; Okunieff, Paul; Vidyasagar, Sadasivan

    2014-04-01

    The sodium-coupled glucose transporter-1 (SGLT1)-based oral rehydration solution (ORS) used in the management of acute diarrhea does not substantially reduce stool output, despite the fact that glucose stimulates the absorption of sodium and water. To explain this phenomenon, we investigated the possibility that glucose might also stimulate anion secretion. Transepithelial electrical measurements and isotope flux measurements in Ussing chambers were used to study the effect of glucose on active chloride and fluid secretion in mouse small intestinal cells and human Caco-2 cells. Confocal fluorescence laser microscopy and immunohistochemistry measured intracellular changes in calcium, sodium-glucose linked transporter, and calcium-activated chloride channel (anoctamin 1) expression. In addition to enhancing active sodium absorption, glucose increased intracellular calcium and stimulated electrogenic chloride secretion. Calcium imaging studies showed increased intracellular calcium when intestinal cells were exposed to glucose. Niflumic acid, but not glibenclamide, inhibited glucose-stimulated chloride secretion in mouse small intestines and in Caco-2 cells. Glucose-stimulated chloride secretion was not seen in ileal tissues incubated with the intracellular calcium chelater BAPTA-AM and the sodium-potassium-2 chloride cotransporter 1 (NKCC1) blocker bumetanide. These observations establish that glucose not only stimulates active Na absorption, a well-established phenomenon, but also induces a Ca-activated chloride secretion. This may explain the failure of glucose-based ORS to markedly reduce stool output in acute diarrhea. These results have immediate potential to improve the treatment outcomes for acute and/or chronic diarrheal diseases by replacing glucose with compounds that do not stimulate chloride secretion.

  3. The Corrosion Behaviour of WC-Co-Ru Alloys in Aggressive Chloride Media

    OpenAIRE

    J. H. Potgieter; Olubambi, P.; Potgieter-Vermaak, S. S.

    2014-01-01

    Hardmetals possess excellent wear resistance, making them suitable alloys in several industrial applications. Mine waters with both dissolved chloride and sulphate salts can be severely corrosive and can limit the application of hardmetal tools in the mining industry. Ru additions to these alloys can refine and improve selected mechanical properties, but its influence on the corrosion resistance is unknown. A series of WC-Co-Ru alloys was evaluated in different chloride containing media to in...

  4. Explosion of lithium-thionyl-chloride battery due to presence of lithium nitride

    OpenAIRE

    Hennesø, E.; Hedlund, Frank Huess

    2015-01-01

    An explosion of a lithium–thionyl-chloride (Li–SOCl2) battery during production (assembly) leads to serious worker injury. The accident cell batch had been in a dry-air intermediate storage room for months before being readied with thionyl chloride electrolyte. Metallic lithium can react with atmospheric nitrogen to produce lithium nitride. Nodules of lithium nitride were found to be present on the lithium foil in other cells of the accident batch. The investigation attributed the explosion t...

  5. Separation of chloride and sulfate ions in univalent and divalent cation forms from aqueous streams.

    Science.gov (United States)

    Bader, M S

    2000-04-28

    The precipitation and separation of chloride and sulfate in several cation forms (sodium, potassium, magnesium, calcium, strontium, and barium) from aqueous streams were studied using isopropylamine (IPA) and ethylamine (EA) as precipitation solvents. The precipitation fractions (P) of the tested chloride salts at 5000 and 10,000 ppm by both IPA and EA over the studied range of solvents volume ratio (V(R)) were relatively identical (18-60%) and their small variations were within their experimental uncertainty. The P of combined sulfate at 1000 ppm (56-99.5%) and chloride at 5000 ppm (28-62%) in the form of calcium by IPA over the studied range of V(R) were appreciably higher than the P of sulfate (10-98.5%) from calcium sulfate in the absence of calcium chloride, or the P of chloride (18-58%) from calcium chloride in the absence of calcium sulfate. The P of chloride from oil-field-produced waters at 106,654 ppm (20-88%) by both IPA and EA were higher than the P of chloride from diluted produced water at 20,000 (17-68%) and 10,000 ppm (16-65%) over the studied range of V(R). The small amounts of sulfate present in the produced waters (e.g., 435 ppm) were completely removed at V(R) of 0.1 (the first stage of precipitation). Consistency tests performed on the acquired data indicated a good level of experimental consistency. Two model equations (2-Suffix and 3-Suffix) derived from thermodynamic principles of solid-liquid equilibrium (SLE) criteria were employed to correlate the acquired data. While both equations were adequate for correlating the precipitation data, the 3-Suffix equation was more accurate.

  6. Examining the impact of heterogeneous nitryl chloride production on air quality across the United States

    OpenAIRE

    Sarwar, G.; H. Simon; P. Bhave; Yarwood, G

    2012-01-01

    The heterogeneous hydrolysis of dinitrogen pentoxide (N2O5) has typically been modeled as only producing nitric acid. However, recent field studies have confirmed that the presence of particulate chloride alters the reaction product to produce nitryl chloride (ClNO2) which undergoes photolysis to generate chlorine atoms and nitrogen dioxide (NO2). Both chlorine and NO2 affect atmospheric chemistry and air quality. We present an updated gas-phase chlorine mechanism that can b...

  7. Examining the impact of heterogeneous nitryl chloride production on air quality across the United States

    OpenAIRE

    Sarwar, G.; H. Simon; P. Bhave; Yarwood, G

    2012-01-01

    The heterogeneous hydrolysis of dinitrogen pentoxide (N2O5) has typically been modeled as only producing nitric acid. However, recent field studies have confirmed that the presence of particulate chloride alters the reaction product to produce nitryl chloride (ClNO2) which undergoes photolysis to generate chlorine atoms and nitrogen dioxide (NO2). Both chlorine and NO2 affect atm...

  8. Benzylation of Aromatic Compounds with Benzyl Chloride Catalyzed by Nafion/SiO2 Nanocomposite Catalyst

    Institute of Scientific and Technical Information of China (English)

    Kun Guo YANG; Rui Mao HUA; Hai WANG; Bo Qing XU1

    2005-01-01

    In the presence of Nafion/SiO2 nanocomposite catalyst, the benzylation of aromatic compounds with benzyl chloride proceeded to afford diphenylmethane derivatives in high yields.The catalyst showed high catalytic activity not only for electron-rich aromatic compounds, but also for electron-poor aromatic compounds. Under identical conditions, the self-benzylation of benzyl chloride, and dibenzylation and/or multi-benzylation of aromatic compounds were negligible.

  9. Unilateral segmental hyperhidrosis. Response to 20% aluminum chloride solution and plastic wrap.

    Science.gov (United States)

    Dworin, A; Sober, A J

    1978-05-01

    A young woman had unilateral dermatomal hyperhidrosis documented by a starch-iodine technique. Evaluation failed to reveal any associated causative conditions. She was treated with 20% aluminum chloride hexahydrate solution in absolute alcohol (Drysol) with a favorable response. With recurrent use, however, she developed miliaria following exertion. Aluminum chloride hexahydrate was shown to be an effective agent to treat this unusual condition, but miliaria with exertion secondary to its use may be a limiting factor. PMID:646401

  10. Reacting Flow of Hydrogen Chloride and Ammonia in Experimental and Numerical Modelling

    Institute of Scientific and Technical Information of China (English)

    Dariusz Kardas; Katarzyna Falkowska

    2003-01-01

    The experimental and numerical investigations of the flow with reaction of two gases: hydrogen chloride HCl and ammonia NH_3 were performed.The article contains description of the visualisation method of the formation and flow of particles of ammonia chloride NH_4Cl.Analyses of mean concentration and variance of concentration fluctuations of dispersed phase were performed for different outputs of gases.Numerical calculations were performed for analysed phenomenon. Both numerical and visualisation results were matched and compared.

  11. Stem morphology and vascular anatomy of Fagopyrum esculentum Moench. under retardant chlormequat chloride action

    OpenAIRE

    Oleksandr E. Smirnov; Anatoliy M. Kosyan; Oksana I. Kosyk; Natalia Yu. Taran

    2015-01-01

    Effects of different concentrations of retardant chlormequat chloride on hypocotyl and first internode lengths of common buckwheat (Fagopyrum esculentum Moench.) were investigated. It was established that treatment of buckwheat plants with chlormequat chloride before presowing led to: reduction of stem length, activation of early and intensive lignification of vascular and mechanical elements, increasing number and size of vascular bundles in correlation with functional reconstructions on don...

  12. Growth and characterization of pure and Ferrous sulphate doped Bis thiourea zinc chloride

    OpenAIRE

    Mrs.M.Jaya Brabha; Sr.A.MotchaRakkini

    2015-01-01

    Non linear optical material has wide applications in the area of optical devices. That device mainly used to measure electromagnetic radiation. Single crystals of pure Bis thiourea Zinc chloride and Ferrous sulphate doped Bis thiourea Zinc chloride were grown by slow evaporation technique. The grown crystals have been subjected to powder X-ray diffraction to determine the crystalline size and unit cell parameter. The incorporation of ferrous sulphate in BTZC was confirmed by the E...

  13. Heterogeneous Palladium Chloride Catalyzed Ligand-free Suzuki-Miyaura Coupling Reactions at Ambient Temperature

    Institute of Scientific and Technical Information of China (English)

    WANG Min; WANG Lei

    2008-01-01

    A mild and efficient ligand-free Suzuki-Miyaura coupling reaction catalyzed by heterogeneous palladium chloride was developed at room temperature in a short reaction time under air atmosphere.Various phenyl iodides,bromides and activated chlorides were coupled with sodium tetraphenylborate or phenylboronic acids efficiently to afford the corresponding cross-coupled products in good to excellent yields.Furthermore,the catalyst could be recycled up to four times without loss of its activity.

  14. Stem morphology and vascular anatomy of Fagopyrum esculentum Moench. under retardant chlormequat chloride action

    Directory of Open Access Journals (Sweden)

    Oleksandr E. Smirnov

    2015-05-01

    Full Text Available Effects of different concentrations of retardant chlormequat chloride on hypocotyl and first internode lengths of common buckwheat (Fagopyrum esculentum Moench. were investigated. It was established that treatment of buckwheat plants with chlormequat chloride before presowing led to: reduction of stem length, activation of early and intensive lignification of vascular and mechanical elements, increasing number and size of vascular bundles in correlation with functional reconstructions on donor-acceptor connections of plant organs.

  15. cis-Dichloridobis(1,10-phenanthroline)chromium(III) chloride

    OpenAIRE

    Xiaoli Gao

    2011-01-01

    In the title complex, [CrCl2(C12H8N2)2]Cl, the CrIII ion is situated on a twofold rotation axis and displays a slightly distorted octahedral CrCl2N4 coordination geometry. The Cr environment is composed of a cis arrangement of two 1,10-phenanthroline and two chloride ligands. The chloride counter-anion exhibits half-occupation and is equally disordered over two positions.

  16. The penetration of chloride in concrete subject to wetting and drying: measurement and modelling

    OpenAIRE

    Bioubakhsh, S.

    2011-01-01

    Corrosion of reinforcing steel arising from contamination by chlorides from de-icing salt is the major cause of deterioration of concrete bridges in the UK and many parts of the world. Those elements of structures exposed to cyclic wetting and drying (BS 8500-1, XD3) have proven to be the most vulnerable to corrosion damage. Penetration of chloride in concrete exposed to wet/dry environments occurs by diffusion and absorption. Diffusion is a relatively slow and quite well under...

  17. DEVELOPMENT OF NON-DESTRUCTIVE MONITORING SYSTEM FOR CHLORIDE PENETRATION INTO REINFORCED CONCRETE STRUCTURES

    OpenAIRE

    Antoni Antoni

    2006-01-01

    Reinforced concrete structures in marine environment are subjected to chloride penetration, which significantly degrades the structural performance due to the occurrence of corrosion in the steel reinforcement. The performance degradation of the structures would reduce the intended service life and caused higher maintenance and repair cost. Therefore, system to monitor chloride penetration into reinforced concrete before the starting corrosion of reinforcement is indispensable. An embedded pr...

  18. Electrical resistivity testing for as-built concrete performance assessment of chloride penetration resistance

    OpenAIRE

    Polder, R.B.; Peelen, W.H.A.

    2014-01-01

    The electrical resistivity of concrete can provide information about its transport properties, which is relevant for durability performance. For example, resistivity is inversely proportional to chloride diffusion, at least within similar concrete compositions. A methodology is proposed for on-site assessment of concrete cover resistance against chloride penetration, based on on-site resistivity testing. As such, resistivity testing can extend existing service life approaches to assessing on ...

  19. HEPATOPROTECTIVE ROLE OF SODIUM SELENITE AGAINST OXIDATIVE DAMAGE INDUCED BY MERCURIC CHLORIDE IN RAT ALBINOS WISTAR

    OpenAIRE

    Youcef Necib; Ahlem Bahi; Sakina Zerizer; Cherif Abdennour; Mohamed Salah Boulakoud

    2013-01-01

    Background: The present study was undertaken, to evaluate the protective effect of sodium selenite against mercuric chloride induced oxidative stress in experimental rats. Female Albinos Wistar rats randomly divided into four groups, were the first was served as a control, whereas the remaining groups respectively treated with: sodium selenite (1mg/ kg b.w; ip), mercuric chloride (1 mg/kg body weight i.p) and combination of sodium selenite and HgCl2. Change in liver enzyme activities, thiobar...

  20. Separation and analysis of low molecular weight plasticizers in poly(vinyl chloride) tubes

    DEFF Research Database (Denmark)

    Wang, Qian; Storm, Birgit Kjærside

    2005-01-01

    The separation of plasticizers in polyvinyl chloride (PVC) used in medical applications was carried out in different solvents and compared by studying the remaining PVC after separation using Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and thermogravime......The separation of plasticizers in polyvinyl chloride (PVC) used in medical applications was carried out in different solvents and compared by studying the remaining PVC after separation using Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC...