WorldWideScience

Sample records for chikyu kankyo keisoku

  1. History of global environmental problems. Chikyu kankyo mondai no rekishi

    Energy Technology Data Exchange (ETDEWEB)

    Matsui, S [Kyoto University, Kyoto (Japan). Faculty of Engineering

    1994-04-15

    This paper takes general view of the history of global environmental problems. A UN human environment conference was held in Stockholm in 1972, at which the human environment declaration and an action plan were adopted. The most important among the results of the Stockholm Conference were the treaty on international transactions of wild animal and plant species feared of extinction in the 1970's, the international treaty on prevention of pollution caused by ocean vessels, and the treaty on prevention of ocean pollution caused by dumping of wastes and other materials. Also adopted in the 1970's include the action plan to prevent desertification, the action plan on the world population, and the world weather plan. The UN Nairobi Conference in 1982 has sounded the alarm on the delay in tackling with the facing problems and the progress of aggravation in the global environment. In 1987, the ozone layer protection protocol was adopted. The earth summit at Rio de Janeiro in 1992 adopted the Agenda 21, with which the participating nations, autonomous bodies, and civil organizations have prepared their own Agenda 21, and are now about to begin challenging the global environmental problems. 7 refs., 4 tabs.

  2. Global environment protection from the universe. Uchuu yori no chikyu kankyo hogo

    Energy Technology Data Exchange (ETDEWEB)

    Iwasaki, N. (National Space Development Agency of Japan NASDA, Tokyo (Japan))

    1994-06-15

    Two articles of 'Care of coppice in Wood Totoro' and 'Global environment protection from the universe' are included in this report. The former explains the necessity of coppice conservation through an example of Sayama Hill in Tokyo. Until the time 30 years ago, coppices are deeply related to people as the places which supply fuel and fertilizer to villagers, but they have been left or cut down by energy source conversion and development of home lots. Now we must learn the traditional methods of caring coppices again and find a new sense of values regarding the nature. The latter introduces satellite-used remote sensing which allows to continuously scan all the areas of the earth within a short period for global environment protection. This sensor uses a wide range of wavelengths from light to radiowave. In the U.S., it is operated in the name of LANDSAT since 1972, and Japan is also operating various kinds of satellites for environment research concerning, e.g., CO2 concentration and resource exploration. 10 figs.

  3. Earth-friendly refuse processing. Chikyu kankyo wo kangaeta gomi shori gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Nishigaki, M. (Takuma Co. Ltd., Osaka (Japan))

    1994-06-15

    This paper contains six articles: (1) Earth-friendly Garbage Disposal, (2) Erasable Copy Machine, (3) Making Plastics from Shell of Crustacean, (4) From Garbage into Petroleum, (5) Utilization of Sewage Sludge for a Recycle-type Society, and (6) FRP Boat Disposal Technology. All articles address the latest topics about disposal of wastes and garbage that have been attracting general attention in environmental issues. The article (1) presents the latest waste incineration technology, garbage power generation, and disposal and utilization of incineration residues. The article (2) is about a prototype of the copy paper regeneration device (toner remover) developed and produced by Ricoh Co., Ltd. The article (3) describes biodegradable plastics using chitin and chitosan that can be acquired from shell of crustacean. The article (4) describes how to extract oil or gas from plastic waste through its thermal decomposition. The article (5) presents volume reduction and utilization of sewage sludge. The article (6) presents disassembling and disposing waste plastic boats that have been rapidly increasing. 8 refs., 27 figs.

  4. Global environmental problems in the electric industry. Denki jigyo ni okeru chikyu kankyo mondai ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Sugi, T [Tokyo Electric Power Co., Inc. (Japan)

    1992-09-30

    Since the electric industry has grappled with a prevention of the environmental pollution such as the air pollution and water contamination as a forerunner in case of construction and operation of the power facilities, and at the same time has conducted actively the environmental conservation countermeasures, it has consequently achieved the environmental conservation level as a top level in the world. On the other hand, as for the emission quantity of CO2 relating to the earth warming, the power field occupies about one fourth of total Japan. Therefore the electric industry should aim at the electric energy supply considering the influence on the environment, such as the power supply structure to restrain CO2 emission as less as possible, higher efficiency of equipments, higher efficiency of energy utilization by using the unused energy and so forth. In addition to it, the consumer side should aim at the social structure with a recycle type such as saving resources and saving energy, and aim at changeover of life style. It is hoped to conduct the overall measure including the items mentioned above. In this report, the recent trend of earth enviromental problems, grappling with the environmental problems as a forerunner such as the prevention measure of air pollution in the thermal power plant, etc., and the correspondence to the earth warming problems are outlined. 11 refs., 9 figs., 3 tabs.

  5. Gas removal technique to maintain global environment. Chikyu kankyo hozen no tame no bojo gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Yamada, K [The University of Tokyo, Tokyo (Japan). Faculty of Engineering

    1992-10-12

    This paper describes the removal technique of gases such as CO2, SO2 and NOx which have the deep relation to the maintenance of global environment. This paper describes partially r SO2 and NOx which are the primary cause of acid rain. As for the removal of CO2 generated from fixed sources (thermal power stations and others), the separation technique and isolation-fixation technique have been researched on and developed. Of the separation method, the effect of the chemical absorption method and the adsorption method is proved with the preceding experiments. The isolation method is differently researched on as to store under deep sea or ground but may be urgent and temporary. The fixation of CO2 is a serious global problem which relates to the afforestation and forests. The fixation which uses coral reefs in ocean as the absorption source has a potential. As for the processing of substances causing acid rain, the desulfurization from petroleum and the flue gas desulfurization have the excellent results. The improvement of combustion method or the flue gas denitrification at the fixed sources are used to remove NOx. The removal of NOx from all diesel cars is difficult compared with the exhaust gas cleaning of gasoline cars and is not commercialized. 11 refs., 1 fig., 2 tabs.

  6. Trend survey of the global environment adaptation type industrial technology. Chikyu kankyo tekiogata sangyo gijutsu doko chosa. ; Chikyu kankyo kanren kenkyu doko no chosa (nisanka tanso no kankyo fuka teigensaku ni kansuru chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    The paper studies the measures for reduction of environmental load of CO2 from the standpoint of chemical technology. As for methanol synthesis from CO2, accelerating of the reaction using Cu base compound catalyst is reported. Also, CO2 is methanated at high speed by low temperature waste heat using Ni-La2O3-Ru catalyst. Discussions are given on the subject for development of catalyst reaction relating to hydrogen production technology by methane reforming reaction using steam or CO2. Synthesis of polymetric materials by use of CO2 is also described. The paper mentions that it is indispensable to design high-function electrode and elucidate the reaction mechanism of electrochemical CO2 reduction for electrochemical and photochemical CO2 reduction measures. Moreover, in case of using solar energy, it is required to study photovoltaic excitation process in semiconductor electrode/ electrolyte solution interface. For production of hydrogen from CO2 by photosynthetic organisms and solar energy, the problem is control of inhibiting effect of oxygen combinedly produced. Described are production of polyhydroxy butyric acid and biodegradable polymer from CO2 and hydrogen by bacteria, and CO2 fixation imitating the enzyme reaction. 267 refs., 79 figs., 32 tabs.

  7. Report on the invitation program for developing countries concerning technology promotion project of global environmental industry in FY 1997; 1997 nendo chikyu kankyo sangyo gijutsu suishin jigyo ni kakawaru chikyu kankyo kanren gijutsu kaigai kenkyusha shohei jigyo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In an effort to help preserve the global environment, International Center for Environmental Technology Transfer (ICETT) contributes to the solution of global environmental problems by promoting research exchanges with developing countries. As a part of this effort, ICETT hosted an environmental development researcher who visited Japan from the Institute of Environmental Research of Chulalongkorn University in Bangkok, Thailand. The invitation was extended at the request of NEDO. During the period of this investigation between September 16 and December 14, 1997, a photocatalyst was prepared and its performance was evaluated under the theme ``Application of photocatalysis to purification of atmospheric environment.`` At the same time, roadside test spots were inspected to study the practical application of optical photocatalysis. The visiting researcher also visited the National Institute for Resources and Environment to discuss with the staff of institute. This helped to deepen understandings of the state of air pollution problems confronting Japan, Europe, and North America, as well as issues related to the technologies that have been developed to solve these problems. The visiting researcher toured the RITE and examined Japan`s progress in the development of environmental control technology through joint research involving government, industry, and academia. At ICETT, the visiting researcher received training in Japan`s approaches to environmental problems in developing countries

  8. An Information Management System for CHIKYU Operation and its Future

    Science.gov (United States)

    Kuramoto, S.; Matsuda, S.; Ito, H.

    2005-12-01

    The CDEX (Center for Deep Earth Exploration, JAMSTEC) is an implementing organization of a riser drilling vessel, CHIKYU ("Earth"). CHIKYU has a large capability to produce a wide variety of data, core measurement data, logging data, mud logging data, cuttings data and monitoring data in boreholes, etc. Also CDEX conducts site survey for safety drilling and publication before and after cruises. It is critical that these diverse data be managed using a unified, coherent method, and that they be organized and provided to users in an intuitive, clearly understandable way that reflects the aims and underlying philosophies of the IODP and JAMSTEC. It is crucial that these data are accessible to users through an integrated interface in which all data formats, management tools, and procedures are standardized. Meeting these goals will assure total usability for scientists, administrators, and the public, from data creation to uploading and cataloging, to end use and publication. CDEX is developing an integrated information management system, call "SIO7" (Scientific Information from 7 Oceans) for CHIKYU operation, and would like to extend to adopt various information handling systems in geosciences. The SIO7 composed of 2 major systems, J-CORES (JAMSTEC Core Systematics) and DEXIS (Deep Earth Exploration Information System) (see http://sio7.jamstec.go.jp/ for the details). J-CORES is a database system designated to manage all aspects of core data. The system is modeled on the JANUS system developed by and for ODP, but implements an extended, somewhat modified data model. The functions that support onboard and real time data input operations have also been strengthened. A variety of data visualization and visual core description functions have been added, and data loading from those applications has been automated, making the system as a whole both powerful and easy to use. On the other hand, DEXIS is developed based on the combination and integration of existing off

  9. Networking of research information on global environment protection technologies; Chikyu kankyo taisaku gijutsu no kenkyu joho network jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Networking is being executed with an objective of exchanging information on global environment technologies at an international level. In order to further promote the information exchange, and to make web sites user-friendly, fiscal 1998 has performed structuring a thesis renewal system. As a result of structuring the thesis renewal system, researchers can use the system as using a word processor by inputting data from a terminal in their laboratories. The data can also be made into a data base nearly semi-automatically. In addition to reducing time loss, delay and input errors because of re-entry, the researchers can make the data into a database on nearly a real time basis, and can provide their own theses to any part of the world through Internet. With regard to retaining Internet security, the security software having been introduced last year was renewed. In addition, detailed status such as daily access has become possible of identification as a result of introducing the net intellect. (NEDO)

  10. Trend survey of the global environment adaptation type industrial technology. Trend survey of global environment related studies (researches on measureds for reduction of environmental load of CO2); Chikyu kankyo tekiogata sangyo gijutsu doko chosa. Chikyu kankyo kanren kenkyu doko no chosa (nisanka tanso no kankyo fuka teigensaku ni kansuru chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    The paper studies the measures for reduction of environmental load of CO2 from the standpoint of chemical technology. As for methanol synthesis from CO2, accelerating of the reaction using Cu base compound catalyst is reported. Also, CO2 is methanated at high speed by low temperature waste heat using Ni-La2O3-Ru catalyst. Discussions are given on the subject for development of catalyst reaction relating to hydrogen production technology by methane reforming reaction using steam or CO2. Synthesis of polymetric materials by use of CO2 is also described. The paper mentions that it is indispensable to design high-function electrode and elucidate the reaction mechanism of electrochemical CO2 reduction for electrochemical and photochemical CO2 reduction measures. Moreover, in case of using solar energy, it is required to study photovoltaic excitation process in semiconductor electrode/ electrolyte solution interface. For production of hydrogen from CO2 by photosynthetic organisms and solar energy, the problem is control of inhibiting effect of oxygen combinedly produced. Described are production of polyhydroxy butyric acid and biodegradable polymer from CO2 and hydrogen by bacteria, and CO2 fixation imitating the enzyme reaction. 267 refs., 79 figs., 32 tabs.

  11. FY 1999 survey report on the global environment international cooperation promotion project/global environment international information network project. Survey of the environmental technology transfer information network; 1999 nendo chikyu kankyo kokusai kyoryoku suishin jigyo / chikyu kankyo kokusai joho network jigyo. Kankyo gijutsu inten joho network chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    At International Center for Environmental Technology Transfer, the following were conducted for enrichment of the environmental technology information: surveys of the state of activities in international organizations and developed countries, cleaner production (CP), ISO, etc. and construction of database. As to the reinforcement of environmental preservation technology information database, enrichment of the data on environmental preservation was attempted mainly about ways of thinking of environmental preservation which brought fruitful results to international organizations overseas. The hierarchization/supplementation were conducted of CP databases which attract much attention especially among developing countries. In the survey of models for environmental preservation, autonomous bodies in Mie prefecture and the certified consultant were taken up to study the process up to the acquisition of ISO14001. The database was so made that it can be a guide for the environmental management in autonomous bodies in developing countries. In the CP survey, as to the United Nations Environment Programme (UNEP), definition/thought were examined in terms of CP, eco-efficiency, pollution prevention, green productivity, etc. (NEDO)

  12. Fiscal 2000 project for promoting international cooperation for global environment. International information network project for global environment (Survey on information network for environmental technology transfer); 2000 nendo chikyu kankyo kokusai kyoryoku jigyo hokokusho. Chikyu kankyo kokusai joho network jigyo (kankyo gijutsu iten joho network chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Environmental technology information database has been shown on Internet for the purpose of transferring environmental technologies; in order to reinforce it this year, a viewpoint was directed to developing countries, with research carried out on the environmental preservation information of the Philippines and Thailand. In the research, in view of promoting cleaner production in developing countries, UNEP regional offices, which are active in the operation, and Asian Development Bank were examined, with their methods, plans and strategies of disseminating the cleaner production surveyed. Also, the database was added with the activities by the organizations concerned in Philippines and Thailand. As for the environmental management system ISO14001, some local governments in Philippines and Thailand will presumably acquire ISO14001 in the future to deal with their environmental management; under the circumstances, Miyama Town was chosen that was first in Mie Prefecture to obtain ISO14001, with the details investigated concerning its environmental policy and the acquisition of ISO14001; and, on the basis of the investigation, a database was prepared so that guidelines for environmental management were provided for the local governments. (NEDO)

  13. Fiscal 1999 survey report. Survey of effect of energy efficiency improvement on global environment; 1999 nendo energy shohi koritsuka chikyu kankyo eikyo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Analyses are conducted into consideration given to global warming measures in the 3rd assessment report of the Intergovernmental Panel on Climate Change (IPCC) and into technology transfer from developed nations to developing nations in the Asia-Pacific region etc. to contribute to their energy efficiency improvement. The aim is to present data for deliberation as to how future energy efficiency improvement measures should be in the Asia-Pacific region. The chapters (Chapter 0 through Chapter 10) of the report to be worked out by Working Group III deeply involved in energy problems are 0) Introduction, 1) Scope of the report; 2) Socio-economic and emissions scenarios; 3) Technical and economic potential of GHG (greenhouse gas) emissions reduction; 4) Technical and economic potential of biological CO2 mitigation options; 5) Barriers, opportunities and market potential of technologies and practices; 6) Policies, measures and instruments; 7) Costing methodologies; 8) Global, regional and national costs and ancillary benefits of mitigation; 9) Sector costs and ancillary benefits of mitigation; and 10) Decision making frameworks. As the result of the survey, some actual technology transfer implementations are introduced covering branches closely related to energy efficiency improvement, which are branches of construction, traffic, industry, energy supply, and wastes. (NEDO)

  14. Survey on chemical engineering technologies for the global environmental protection; Chikyu kankyo hozen no tame no kagaku kogakuteki taisaku gijutsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    1993-03-01

    The present paper suggests chief measures to suppress and reduce global greenhouse gases. Under the control of artificial environments such as bioreactor, hydroponics and vegetable factory, a very high fixing rate of CO2 can be obtained, but CO2 generation accompanying electric power consumption is also large. It is preferable to use methane as resource by reforming reactions or selective oxidative reaction. In the recovery technique of fluorocarbon, 100% recovery is desirable. Techniques for decomposing recovered fluorocarbon and converting it to harmless material are the most backward ones. Understanding of essential structural relationship of coal is necessary for establishing combustion technique for the reduction of N2O. The integrated power generation system composed from solid electrolyte type fuel cell and coal-gasifying process, high-performance, superheat pump system form scientific technology imposing no burden on the global environment. Establishment of purification technique for industrial- or living-related drain inflowing to a closed water area system, establishment and reinforcement of inspection system for oil spill in the oceans in a global scale are required. 240 refs., 63 figs., 30 tabs.

  15. Fiscal 1994 survey report. Survey of energy supply/demand structure sophistication and global environmental impact; 1994 nendo energy jukyu kozo kodoka chikyu kankyo eikyo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    Outlines of various energy supply/demand analytical models are surveyed. With environmental problems gathering importance, a number of models are being introduced in which energy supply/demand structures, long-term climate changes, and impacts of policy options on social economy are linked to each other. Some socioeconomic impact models cover a single country and others the whole world. They are various in type, ranging from dynamic optimization models to static balance models. Twenty-four models are chosen, and grouped into two types respectively covering Japan and the whole world from a geographical viewpoint and into three groups in view of their structures. Under an optimization model, such optimization is accomplished as economic growth maximization and energy cost minimization and so forth under given energy supply restrictions. Under a general balance type econometric model, an adjustment process in which capital and labor and production are coordinated across multiple departments is expressly stated. Under a partial balance type econometric model, a demand function for goods is given and optimum behavior such as consumption maximization is indirectly described. (NEDO)

  16. Project to promote the technical development of global environmental industries. International research exchange project; Chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo. Kokusai kenkyu koryu jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Exchanges with researchers/research institutes in overseas countries have an important meaning in promoting the research and development toward the creation of new research fields where the solution to the environmental problem is aimed at and toward the construction of new technological systems. Therefore, under the cooperation of Research Institute of Innovative Technology for the Earth (RITE), and RITE related researchers and societies, given were invitation and dispatch of researchers to international conferences and symposia involved in the global environment related technology, and exchanges with major overseas research institutes/universities. At the same time, based on the short-term invitation and dispatch so far given, a system was established for medium- and long-term dispatch/invitation of researchers who are thought to hold an important position in the future research activities. From the results obtained, domestic and foreign exchanges relating to the latest research could be promoted. In addition, researches in the basic domain related to the global environmental technology were advanced in a variety of fields overseas. The numbers of invitation and dispatch given in fiscal 1995 were 12 and 13, respectively, the results of which were included in this paper. 121 refs., 74 figs., 11 tabs.

  17. FY 2000 report on the survey of effects of enhancement of energy consumption efficiency on the global environment; 2000 nendo energy shohi koritsuka chikyu kankyo eikyo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Looking for effective measures for enhancement of energy consumption efficiency in the Asia Pacific region, survey was made of the state of study of measures against global warming in the 3rd IPCC report and the state of study of the incidental convenience. The survey was made in the following two fields: 1) research analysis in study of the 3rd IPCC report; 2) research analysis of the convenience incidental to measures against global warming. 1) is composed of IPCC activities and the 3rd assessment report, and the developmental state of global warming prevention technology and potential of greenhouse effect gas reduction. Subjects on the prevention technology are the technology for enhancement of energy consumption and development of non-fossil fuels. Physical/chemical CO2 fixation is also studied. 2) is composed of the introduction, economic/social/environmental effects, international flow, reasons for different conclusion in every study, and fields of further study. Considered were global warming prevention measures, for example, economic/social/environmental effects of creation of the carbon tax, reduction in subsidy in energy sector, etc. (NEDO)

  18. Survey on problems in developing technologies for the global environment issues (Version II); Chikyu kankyo mondai gijutsu kaihatsu kadai chosa. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-07-01

    This paper describes a survey on problems in developing technologies for the global environment issues. Technological development of means to reduce generation of environmental issues and substitutive means for non-generation thereof is being moved forward specifically in the Sunshine Project and the Moonlight Project. The Chemical Technology Research Institute assumes that it has a responsibility to positively contribute to developing a technological system that matches the substance circulation mechanism of the earth from the fields of chemistry. Therefore, the Institute has organized working groups that have been identifying problems from their expertise standpoints and have been extracting study assignments. Subsequent to the Version I, the Version II has been compiled. The Version II takes up the simulation of global warming mechanisms, behavior of gases dissolved in oceans, and possibility of fixing CO2 in oceans. With respect to fluorocarbons, the Version II describes development of substitutive substances, their stability, combustion method as a destruction technique, and destruction by means of super criticality. Regarding CO2, the version introduces technologies to re-use CO2 as a resource by means of membrane separation, storage, and contact hydrogenation. The volume also dwells on CO2 reduction by using photo-chemical and electrochemical reactions, CO2 reduction and photo-synthesis by using semiconductors as photo catalysts and electrodes. (NEDO)

  19. Fiscal 1999 report on international joint research project on global environmental technology; 1999 nendo chikyu kankyo gijutsu kokusai kyodo kenkyu jigyo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    As part of the above-named effort, Japanese researchers were dispatched to overseas universities and laboratories for implementing joint researches into 11 subjects selected by the NEDO (New Energy and Industrial Technology Development Organization) screening committee. When the feedback of fruits of the researches to NEDO projects is taken into account, it may be said that the accomplishments, attained relative to the development of processes for the practical application of environmentally-friendly biomass energy and measures for promoting its adoption, will contribute to the completion of an environmentally-friendly energy production process, excellent in CO2 emissions reduction, in which biomass will be the raw material. In relation to the technology of installing pipes for CO2 discharge into the ocean, some of the dispatched researchers had an opportunity of studying technological problems not deal with under NEDO research and development projects. In the study of organized structures of low-purity CO2 bubble groups, a great contribution was made to the promotion of the NEDO-implemented project of evaluating the impact of CO2 storage in the ocean upon environments. The development of remedial technologies for Microcystis aeruginosa-invaded lakes by introducing environmental engineering assumes a very important position in the endeavors for environmental improvement in developing nations in the Asia-Pacific region. (NEDO)

  20. Research information network survey of innovative technology for the earth. 2; Chikyu kankyo taisaku gijutsu no kenkyu joho network chosa. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    In order to construct the information network system for a research of innovative technology for the earth, a prototype has been made. To draw necessary functions for the information network system, an information flow in a general research work is analyzed to classify it based on the functions. The information collecting function, information accumulating and sharing function, special information system for research, information providing function, and communication function of the net work correspond to the collecting information, accumulating information, being engaged in research, providing information, and communication of researcher`s actions, respectively. The services on network system supposed from these functions are the homepage search mailing list, intranet service, special information system for research, WWW Internet broadcasting, and BBS/news/conference tool, respectively. It was found that latest Internet technology enabled to construct easily controlled system environment for users and WWW would develop as a standard communication tool. 2 refs., 26 figs., 27 tabs.

  1. Research on the information network for R and D on the innovative technology for the earth; Chikyu kankyo taisaku gijutsu no kenkyu joho network chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    With an objective to structure an information network system to promote research information exchange on global environment preserving technologies, the currently used RITE information system was reviewed, and the WWW home page was discussed. Three years have passed since the structuring of the RITE information system, during which remarkably popularized use of the Internet can be seen. With respect to provision of research information through the Internet, IP connection is possible in almost all the countries; a variety of research information utilizing WWW are provided; multi-media functions are advancing in image information, audio information and animated image information; and retrieval servers are improved according to applicable fields. Regarding the RITE information system, discussions are given on improvement in the Internet access environment, and expansion in information providing scope and information exchange environment. A WWW home page was prepared on a trial basis, which indicated that a considerable amount of information can be provided even under the presently retained information and the current network environment. 2 refs., 28 figs., 3 tabs.

  2. Report on an international joint research project for global environment technology in fiscal 1998; 1998 nendo chikyu kankyo gijutsu kokusai kyodo kenkyu jigyo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    In order to serve for measures against global problems taken by Japan, joint research was carried out with overseas research organizations. The research project selected ten themes considering urgency, internationality and economic proliferation effect in areas to serve for solution of global environment problems. These themes include removal or emission control of greenhouse effect gases, measures against atmospheric environment problems such as acid rains and ozone layer destruction, prevention of ocean contamination, development and effective utilization of energies and resources. When the feedback of these themes to the NEDO projects is considered, the research achievements in relation with development of the acid rain monitoring system in particular support indirectly development of carbon dioxide fixation technologies. The research achievements in developing an environmentally friendly biomass energy manufacturing process and environmental effect evaluation thereon contribute as an effective process to carbon dioxide reduction using biomass as raw materials. The achievements in research of nonlinear interfacial properties and mixed phase turbulence of low-purity carbon dioxide bubbles contribute to a project related to storage of carbon dioxide in oceans. (NEDO)

  3. Global environment assessment survey by advancing the energy demand and supply structure. 4; Energy jukyu kozo kodoka chikyu kankyo eikyo chosa. 4

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    To investigate the energy demand and supply structure in Japan, the international trend of approaches to global warming problems and the mitigation options to global warming in the energy related sectors have been surveyed. For the United Nations Framework Convention on Climate Change, an Ad-hoc Group has discussed relevant topics after the 1st conference of the Parties. Meetings of the Group primarily focused on what objectives to set for the reduction of greenhouse gas (GHG) emissions in and in and after 2000. IPCC completed their Technical Paper in November 1996 in which technologies and measures to reduce GHG emissions and to enhance GHG sinks were analyzed and evaluated in various aspects. This Paper discusses about each sector of institutional buildings sector, transport sector, industrial sector, and energy supply sector. Especially, in the energy supply sector, promising approaches to reduce future emission include more efficient conversion of fossil fuels, switching to low-carbon fossil fuels, decarbonization of flue gas and fuels, CO2 storage, switching to nuclear energy, and switching to renewable sources of energy. 5 refs., 2 figs., 14 tabs.

  4. Global environment action plant of Japan Society of Civil Engineers. ; Agenda 21 / Japan Society of Civil Engineers. Doboku gakkai chikyu kankyo kodo keikaku. ; Agenda 21 / doboku gakkai

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-15

    This paper explains the involvement of the global environment action plan of Japan Society of Civil Engineers, Agenda 21, with civil engineerings and global environmental problems, as well as the global environment action plan. Global environmental problems require handling the matters in three ways: identification and elucidation of events, effect analysis estimation, and alleviation, avoidance and prevention of the effect. Settlement and proliferation of civil engineering technologies transferred to developing countries demand indispensably understanding such features of the developing countries as social and economic conditions, natural conditions, climates, histories, races, and cultures. Realizing the sustainable development requires the followings: formation of civil engineerings that contribute to improving global environments; development of civil engineerings that make coexistence of human being and other living organisms possible; analyses of effects and mechanisms of global warming and weather change and the corresponding technique and system development; and development of techniques to build resource circulating type national land and cities. It is also essential to move forward positively structuring civil engineerings that contribute to solving such global environmental problems as acid rains and marine pollution, and technical development thereof; providing guidelines on execution of international civil engineering constructions, and technical development thereof; developing civil engineerings in developing countries and assisting training of people.

  5. Fiscal 1998 research report on the global environmental assessment for efficient energy consumption; 1998 nendo energy shohi koritsuka chikyu kankyo eikyo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    International Panel on Climate Change (IPCC) published the 1st assessment report in 1990 and the 2nd report in 1995 since its establishment in 1988, and is promoting the 3rd research and analysis. Among them, this report describes the study on technology transfer for efficient energy consumption. For stabilizing greenhouse effect gas concentrations in the air, strong control of such gas emission is indispensable, and a role of technology is important for the control. For overcoming some weak points for climate change, practical use of applicable technologies is necessary over a certain period of time, and technology transfer is essential in each country and all over the world. For promotion of such approach, the analysis and evaluation for technology transfer and diffusion are useful in addition to reports on technology itself. Based on such understanding, IPCC has promoted preparation of the special report on methodological and technological issues of technology transfer since 1997. Its approval at the IPCC general meeting is expected in late 1999 or early 2000. Some chapters related to efficient energy consumption are presented. (NEDO)

  6. Energy, oil and global environmental problems towards21st. century. 21 seiki ni mukatte no energyter dot sekiyuter dot chikyu kankyo mondai

    Energy Technology Data Exchange (ETDEWEB)

    Ishikawa, K [Mitsubishi Oil Co. Ltd., Tokyo (Japan)

    1990-09-01

    The world energy demand is increasing with the development of the world economy and the improvement of the life level. In view of the future economic development and population growth, the world energy demand will considerably increase especially in the LDCs. Since the oil crisis, saving of energy and material were effectively executed, thus significantly reducing the energy requirement per GNP. However, in the recent several years, the conciousness of energy has become diluted, causing considerable consumption in larger size and higher grade products, thus increasing the non-industrial and transportation consumption. This report considered the effective use of energy and the nuclear application. It is to be noted that the accident frequency in the Japanese nuclear plants is much less than the other countries. The coal utilization requires further technical development in view of the environmental problems. Other substitutible energies are all weak in competition and cannot be expected utilizable in large scale for the time being. This report also referred to the oil problem. 9 figs.

  7. Project to promote the development of global environmental industry technology. Feasibility study of research exchanges; Chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo. Kenkyu koryu kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    In fiscal 1995, three teams were organized to study the following subjects: plant genetic and cellular engineering in relation to drought stress; simulation models of global environment for accurate assessment and prediction; the APEC Virtual Center for environmental technology exchange. The team studying plant genetic and cellular engineering in relation to drought stress visited the Department of Botany, Hebrew University of Jerusalem, Israel, the Jacob Blaustein Institute for Desert Research, Ben-Grunion University, Israel, the Department of Biochemistry and the Office of Arid Lands Studies, Arizona University, the U.S. to survey the present and future trend of the study and feasibility of research exchanges. The team studying simulation models of global environment for accurate assessment and prediction visited Yale University, Massachusetts Institute of Technology, Electric Power Research Institute, and Battle Research Institute in the U.S. to survey feasibility of research exchanges. The team studying the APEC Virtual Center for environmental technology exchange visited institutes in ASEAN countries to survey needs for the Virtual Center. 312 refs., 74 figs., 17 tabs.

  8. Survey of effects of enhancement of the energy supply/demand structure on the global environment. 3; Energy jukyu kozo kodoka chikyu kankyo eikyo chosa. 3

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    For the purpose of studying how the energy supply/demand structure in Japan should be, a report on the secondary IPCC (Intergovernmental Panel on Climate Change) evaluation was analyzed. Possibilities of reducing the world CO2 emissions in association with the energy consumption were studied in the five assumed cases. Every case says that CO2 can be reduced to 1/3 of the 1990 level by 2100. In a case of the use of biomass as main fuel (1), the use of primary energy is suppressed to two times the 1990 level, and photovoltaic/wind/biomass power generation is introduced in a large quantity. Synthetic methanol and hydrogen are used for transportation and commercial/residential use fuels. There are four more assumed cases: the use of nuclear power as a substitute for renewable energy in the power generation in (1), the use of natural gas of 1.5 times that used in (1), the substitution of coal for biomass used in (1), and the assumption that the demand for primary energy in 2100 will be twice that used in (1). In Japan it is assumed that basically the nuclear power generation will be expanded, that the photovoltaic and waste power generation will be introduced in a large quantity, and that synthetic methanol and hydrogen are mainly used as transportation and commercial/residential use fuels. It is necessary, therefore, to analyze conditions under which the quantity introduction of such non-fossil energy is made possible. 11 figs., 31 tabs.

  9. Promotion project to develop the global environment related industrial technology. Investigation on the possibility of research exchange; Chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo. Kenkyu koryu kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    Through visits to US universities and research institutes, investigation was made on the trend of global environment-related research and possibility of their exchanging the result of research with the RITE (Research Institute of Innovative Technology for the Earth). To investigate the process technology to utilize microbes harmoniously with the environment, the visit was paid to Cornell University, Battelle Memorial Institute and Risk Reduction Engineering Laboratory, where the investigation was made on the environmental bioremediation with microbial functions and clean process production without by-producing substances to load the environment. To investigate the technical measures against the global warming, the visit was paid to Brookhaven National Laboratory, Massachusetts Institute of Technology, California University, Hawaii University and Pacific International Center for High Technology Research, where the investigation was made, through discussion and exchange of research information and opinion with researchers and engineers, on the possibility of their exchanging the result of research with the RITE. Judging from the investigation of this time, the research which is mutually complementary between Japan and USA is easy to promote, because their respective advanced fields do not overlap with each other. 88 refs., 11 figs., 6 tabs.

  10. X-ray CT core imaging of Oman Drilling Project on D/V CHIKYU

    Science.gov (United States)

    Michibayashi, K.; Okazaki, K.; Leong, J. A. M.; Kelemen, P. B.; Johnson, K. T. M.; Greenberger, R. N.; Manning, C. E.; Harris, M.; de Obeso, J. C.; Abe, N.; Hatakeyama, K.; Ildefonse, B.; Takazawa, E.; Teagle, D. A. H.; Coggon, J. A.

    2017-12-01

    We obtained X-ray computed tomography (X-ray CT) images for all cores (GT1A, GT2A, GT3A and BT1A) in Oman Drilling Project Phase 1 (OmanDP cores), since X-ray CT scanning is a routine measurement of the IODP measurement plan onboard Chikyu, which enables the non-destructive observation of the internal structure of core samples. X-ray CT images provide information about chemical compositions and densities of the cores and is useful for assessing sample locations and the quality of the whole-round samples. The X-ray CT scanner (Discovery CT 750HD, GE Medical Systems) on Chikyu scans and reconstructs the image of a 1.4 m section in 10 minutes and produces a series of scan images, each 0.625 mm thick. The X-ray tube (as an X-ray source) and the X-ray detector are installed inside of the gantry at an opposing position to each other. The core sample is scanned in the gantry with the scanning rate of 20 mm/sec. The distribution of attenuation values mapped to an individual slice comprises the raw data that are used for subsequent image processing. Successive two-dimensional (2-D) slices of 512 x 512 pixels yield a representation of attenuation values in three-dimensional (3-D) voxels of 512 x 512 by 1600 in length. Data generated for each core consist of core-axis-normal planes (XY planes) of X-ray attenuation values with dimensions of 512 × 512 pixels in 9 cm × 9 cm cross-section, meaning at the dimensions of a core section, the resolution is 0.176 mm/pixel. X-ray intensity varies as a function of X-ray path length and the linear attenuation coefficient (LAC) of the target material is a function of the chemical composition and density of the target material. The basic measure of attenuation, or radiodensity, is the CT number given in Hounsfield units (HU). CT numbers of air and water are -1000 and 0, respectively. Our preliminary results show that CT numbers of OmanDP cores are well correlated to gamma ray attenuation density (GRA density) as a function of chemical

  11. FY 2000 report on the promotion projects by Research Institute of Innovative Technology for the Earth. Proceedings of the international seminar (Reports presented to the international forum held by RITE); 2000 nendo chikyu kankyo sangyo gijutsu kaihatsu suishihn jigyo kokusai seminar shiryo. RITE chikyu kankyo kokusai forum hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Research Institute of Innovative Technology for the Earth (RITE) has been inviting creative, advanced research projects still in the early stage on an international scale to raise the research seeds for global environment preservation, and promoting the selected themes. The organization has invited the domestic authorities and researchers for the research projects selected from abroad as the good projects in the areas of biology and chemistry, to hold the international forum in March 2001. The keynote lecture in the area of biology addresses the latest researches on plant and life science, stressing how the researches contribute to global environmental problems. The keynote lecture in the area of chemistry addresses possibility of establishment of energy resource cycles utilizing the natural force of the earth. The last lecture introduces the research results by the environmental catalyst research group of RITE. The forum has animated questions and answers in the lectures selected as the good research projects. (NEDO)

  12. Listvenite logging on D/V CHIKYU: Hole BT1B, Oman Drilling Project

    Science.gov (United States)

    Kelemen, P. B.; Beinlich, A.; Morishita, T.; Greenberger, R. N.; Johnson, K. T. M.; Lafay, R.; Michibayashi, K.; Harris, M.; Phase I Science Party, T. O. D. P.

    2017-12-01

    Listvenite, quartz-carbonate altered ultramafic rock containing minor fuchsite (Cr-muscovite) forms by complete carbonation of peridotite and is thus an attractive objective for carbon mitigation studies. However, reaction controls and evolution of listvenite are still enigmatic. Here we present the first results of Phase 1 of the ICDP (International Continental Drilling Program) Oman Drilling Project and subsequent core logging using the analytical facilities on board the research vessel D/V CHIKYU. Hole BT1B contains 300 m of continuous drill core intersecting alluvium, listvenite-altered serpentinite, serpentinite, ophicarbonate and the underlying metamorphic sole of the Semail ophiolite, Oman. The drill core has been systematically investigated by visual core description, thin section petrography, X-ray fluorescence core logging, X-ray diffractometry, visible-shortwave infrared imaging spectroscopy and X-ray Computer Tomography. Our observations show that listvenite is highly variable in texture and color on the mm to m scale. Listvenite was visually categorized into 5 principal color groups: the dominant dark red (47 %), light red (19 %), orange (14 %), pale (2 %) and green (16 %). The presence of hematite/goethite results in dark reddish, red and orange hues. Light grey or pale colored listvenite lacks hematite and/or goethite veins and may represent the `true' listvenite. Green listvenite is characterized by the presence of cm-sized quartz-fuchsite intergrowths. Five zones of serpentinite, which vary in thickness between several tens of cm and 4 m, are intercalated within the massive listvenite of Hole BT1B. Gradational listvenite-serpentinite transition zones contain the ophicarbonate assemblage (magnesite + serpentine) and sometimes additional talc, representing intermediate carbonation reaction progress. Preservation of the former mesh texture and bastite after orthopyroxene in the listvenite suggest that the listvenite precursor had already been

  13. FY1995 high techniques of measuring for sensation, cognition arid behavior in the man-products-environment interface; 1995 nendo seihin kankyo interface ni okeru kankaku ninchi kodo keisoku kodoka ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    We measure the distribution of activation locus of brain cortex area and its time-sequence against various kinds of stimulus by using the fMRI that can visualize directly brain activities. Next, we try to make a simulation model of the information processing system of brain, and aim at establishment of new evaluation index for environment-human interface based objectively or quantitatively on brain activity data. we challenged to examining quantitatively brain activities by using functional MRI instrumentation technique. We made a effort to acquire functional MRI technique by repetition of pilot studies, and were successful in visualization of visual cortex (primary sensory area). In the latter period, sensory areas whose function had not been studied sufficiently and higher functional areas of brain which related to memory, attention and emotion were studied. The identification of action locus of gustatory area was tried using functional MRI studies. In studies about the ability of spatial attention, experiments elucidating locus participating in space perception and attention and its function were advanced. It was suggested that activation locus of brain was different between a color-form matched stimulus and a mismatched stimulus. The MRI measurement added the information of musculoskeletal system to the current analysis of human body configuration and gesture character, and a more detailed analysis of human body became possible. This is, an useful analysis was suggested by a plan of shoes pattern. (NEDO)

  14. Research on the general analytical method of fossil fuel cycle from a viewpoint of the global environment. 3; Chikyu kankyo kara mita sogoteki kaseki nenryo cycle bunseki hyoka shuho no chosa. 3

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The general analysis/assessment method of a fossil fuel cycle was studied. Seven kinds of power generation plants such as LNG cycle and coal cycle ones, and four kinds of transport and treatment systems of recovered CO2 such as ocean and underground systems were studied as case studies on life cycle analysis. As data necessary for life cycle analysis, the database was constructed which stores the facilities and operational energy required for a total energy system from mining of fossil fuel to treatment of recovered CO2, and the quantity of environmental waste such as CO2 emission. As a result, the decrease rate of energy balance defined as ratio of input energy to power plant output was estimated to be 14-43% and 20-60% in LNG cycle and coal cycle, respectively. Even if the recovery rate of CO2 in power plants reached 80-90%, reduction of total CO2 emission was limited to only 20-40% because of CO2 emission during mining, liquefaction and transport of fuel. 168 refs., 48 figs., 102 tabs.

  15. Fiscal 1990 technological survey report. Report on NEDO's 10th anniversary international symposium (New energy and global environment); NEDO soritsu 10 shunen kinen kokusai symposium hokokusho. Shin energy to chikyu kankyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-10-03

    Two lectures were given by Christopher Flavin (vice president for Research, Worldwatch Institute Inc.) and Hiroshi Takeuchi (chairman, LTCB Consulting and Research Institute Inc.), and a panel discussion was held by five panelists with Toyoaki Ikuta (The Institute of Energy Economics, Japan) as the coordinator. The themes were 'a sustainable energy strategy for the nineties', 'industrial structure change and energy problem', and 'new energy and the global environment'. The panelists were from Sweden, France, Thailand, U.S.A., and Japan. The main subject was energy security, in which discussion was held on the uneven distribution of oil resources in the Middle East and political instability in the region and on counter measures against global warming problem. The discussion on the latter subject showed that a limitation exists in the total consumption of fossil fuel in the world, and that energy policies were meaningless unless they were on a global scale. As the concrete measures, energy conservation technologies and regenerative energy utilization technologies need to be developed and spread, for which emphasized was the spread on a global scale, namely, the necessity of international cooperation and an international propulsion system. (NEDO)

  16. Systematic arrangement of global environment measure technology. 3. Current status of methane generation and its effective utilization; Chikyu kankyo taisaku gijutsu no taikeiteki seiri. 2. Methane no hassei jokyo to sono yuko riyo no genjo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The status of the methane generation due to landfill with waste has been analyzed to investigate the actual circumstances of effective utilization of methane in the world and its possibility. The artificial generation of methane is 375 Tg per year among the total methane generation in the world, 535 Tg per year. The methane generation from the landfill with waste is 40 Tg per year, which becomes a rather large contribution. The methane generation from the landfill with waste in Japan is estimated to be from 130 to 520 Gg per year, which is a rather low value as a share in the world. This is caused by the sub-aerobic property of landfill in Japan, and the methane generation can be suppressed. Accordingly, there are no systems using recovered methane as energy source in Japan. In the USA, profitability of energy recovery can be established in 600 to 700 landfills among about 6,000 landfills. The methane recovery is practically conducted at more than 120 landfills. The recovered methane is used as a power generation fuel. 45 refs., 43 figs., 27 tabs.

  17. Survey report of FY 1997 on the global environmental industry technology development promotion project. International research exchange project; 1997 nendo chosa hokokusho. Chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo (kokusai kenkyu koryu jigyo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Exchange of personnel among foreign research organizations is significant for promoting research and development to create new research fields and to build new technological systems for the purpose of solving global environmental problems. For this purpose, researchers were sent/invited to/from international conferences and international symposiums related to global environmental technology and exchange of personnel with major foreign research organizations and universities was conducted under the cooperation of RITE and RITE-related researchers and related academic societies. Based on short-term invitation and sending of researchers as well as the feasibility study of researcher exchange, researchers were sent/invited on long- and mid-terms. As a result, exchange of personnel engaged in the latest research in Japan and overseas could be promoted. It was found that various researches are being conducted abroad in basic areas of global environmental technology. Since they are closely related to the research and development of industrial technology contributing to global environmental preservation promoted by RITE, it is important to establish a more efficient exchange system of researchers in the future. 91 refs., 38 figs., 14 tabs.

  18. Achievement report on development of global warming prevention related technologies in fiscal 1998. Development of environment harmonizing type dye finishing technology; 1998 nendo chikyu ondanka boshi kanren gijutsu kaihatsu seika hokokusho. Kankyo chowagata senshoku seiri gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The dye finishing operation in the textile industry places heavy load on the global environment. This paper describes the achievements in fiscal 1998 on development of process to eliminate the load. Low-temperature plasma treatment was introduced into the desizing and refining process to develop a continuous treatment process using no water and chemicals. Quality equivalent to that produced by conventional methods was obtained by applying an appropriate plasma treatment condition. The energy saving rate was presented by reduction by 84.3% converted into steam. Conventional dye finishing operation uses three to six times as much water as the cloth weight. The developed air flow treatment device reduced the water ratio to less than one. This is 86.0% reduction of energy consumption converted to steam. In removing pectic substance in cotton refining, no water, chemicals and steam were used, but were substituted by enzyme for continuous treatment. Good finishing result was obtained by performing bleaching and dying. Enzyme cost is an issue, but the cost would decrease if it is used in large quantity. A two-dimensional colorimeter (measures cloth color with high clarity and reproducibility) and an automatic dye preparing device (with high volume measuring performance) were developed. If the cost required for re-coloring under the present inspection method is converted into energy, it corresponds to 81.6% reduction. (NEDO)

  19. Research report for fiscal 1998. Research into the feasibility of exchange of studies for the development and promotion of global environment-related industrial technologies; 1998 nendo chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo. Kenkyu koryu kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The above was conducted by Research Institute of Innovative Technology for the Earth (RITE). Worldwide collaboration is mandatory for the settlement of environmental problems for the earth, and RITE is positively promoting its interaction with research institutes abroad. In fiscal 1998, it sent research teams to government organizations and research institutes in Europe and America for studies there. A study in Europe involved the preparation of chemicals from CO2 by virtue of novel biotic reactions, and RITE's microbial molecular function laboratory plans to start a leading study in fiscal 1999. In relation with environmental impact reducing technologies using sunlight-aided photocatalysts, visits were paid to three research institutes in America. RITE itself has developed a powdered semiconductor catalyst and is engaged in the study of producing hydrogen by decomposition of water using solar energy. Concerning the production of saccharides out of farm wastes remaining unused, researches were made into the feasibility of joint studies with some advanced research institutes in America. Discussions were made about the performance- and stability-related improvement of enzymes usable for the decomposition of biomass, the analysis of biological environmental circumstances that substance yielding microbes find themselves in under anaerobic conditions, etc. (NEDO)

  20. Fiscal 2000 report of investigation. Project for promoting international cooperation for global environment/Project for assessment on effect of climate change; 2000 nendo chikyu kankyo kokusai kyoryoku suishin jigyo / kiko hendo eikyo hyoka nado jigyo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Assessment and examination were conducted on the scientific/technological aspect, environmental aspect and economic/social aspect concerning measures for mitigating climate change, as a part of international cooperation in global warming issues. In the development of assessment methods for cost analysis, it revealed that, in the activities for mitigating emission of greenhouse effect gases (GHG) or for increasing carbon sequestration, benefits of the mitigation sometimes surpassed their cost, allowing the society to benefit from the mitigation. In the examination of problems in technology transfer and their solutions, it was found that, in order to attain successful transfer, partnership among the parties interested was essential and that each government was capable of promoting such partnership. In the assessment of various policy options, the situation in the U.S. is such that the market aspect of GHG emission permit and credit trading is rather weak because of immaturity in a legal framework on GHG emission trading and because of undefinedness in the systems of the Kyoto Protocol and in the possibility of its validation. However, the reason enterprises are actively participating in the early market is that they plan a risk-hedge for example in anticipation of tighter regulations in the future. (NEDO)

  1. 1998 Annual Study Report. Surveys on seeds for global environmental technologies, including those for energy saving; 1998 nendo chosa hokokusho. Sho energy nado chikyu kankyo taisaku gijutsu no seeds ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The energy-saving and other global environmental technologies are surveyed by collecting relevant information from various institutes, both abroad and domestic, to contribute to development of ceramic gas turbines. USA has announced a climate change plan, based on the five principles, to promote utilization of high-efficiency technologies and development of new clean technologies. UK is promoting to improve energy efficiency, along with liberalization of its energy markets. Germany concentrates its efforts in the 'Program for Energy Research and Energy Technologies.' France places emphasis on prevention of air pollution and rational use of energy. The R and D trends at public institutes, e.g., universities, for global environmental technologies are surveyed, from which a total of 14 themes are extracted as the seed technologies. At the same time, a total of 9 techniques potentially applicable to the seeds are extracted by mainly reviewing JICST and patent information, and assessed. The R&D trends of the IPCC-related researchers are also surveyed, but provide no theme directly applicable to the seeds. Most of the related themes at the private and public institutes surveyed, both domestic and abroad, are concentrated on carbon dioxide. (NEDO)

  2. Fiscal 1999 survey report. Project of promoting international cooperation on global environments/Project of assessing climate change impacts; 1999 nendo chikyu kankyo kokusai kyoryoku suishin jigyo chosa hokokusho. Kiko hendo eikyo hyoka nado jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    As part of international cooperation concerning global warming, an assessment is conducted of climate change mitigating measures, from the viewpoints of technology, environment, economy, and community, in coordination with the IPCC (Intergovernmental Panel on Climate Change) 3rd working group responsible for energy policy and technological development. It aims to contribute to the preparation of a 3rd assessment report, and covers (1) the development of an assessment technique relating to cost analysis, (2) problems in the transfer of technology and solutions for them, and (3) the assessment of various policy options. Under item (1), studies are made about modelling techniques, common parameters and their values, potentials for effect, control of warming, etc. Under item (2), factors impeding the transfer and diffusion of technology are extracted and solutions therefor and the establishment of new incentives are deliberated, with analysis and investigation focused on tasks and solutions for furthering global transfer of technology with attention paid to various specific cases. Under item (3), concrete and feasible policy options are discussed on the basis of the outcome of the above-named endeavors, in view of characteristics of each of the regions, departments, and techniques. (NEDO)

  3. FY 1998 international cooperation project for global environment/project to evaluate influence of climate change; 1998 nendo chosa hokokusho. Chikyu kankyo kokusai kyoryoku jigyo/kiko hendo eikyo hyokanado jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    As a part of the international cooperation for the global warming problem, evaluation/study were conducted on policy to lessen climate changes from viewpoints of scientific technology, environment, and economy/society. In the development of evaluation methods on cost analysis, the following were pointed out: Changes in resource utilization brought about as a result of the policy are all needed to be numerated; In resource, clean air and water, and also abolition of price barrier and prices now in force are included. As subjects on the technology transfer, cited are barriers in aspects of organization/system and barriers in aspects of economy/finance and society. Especially, it was pointed out that it is necessary to exchange the persons concerned in the industrial sector. Of various optional policies toward the prevention of global warming, the Kyoto mechanism not only has an economical merit of the use of low cost option but can be fairly promising from an environmental viewpoint of internationally controlling the greenhouse effect gas emission, if the characteristic of practically using the market can be so designed that it fulfills its function. (NEDO)

  4. Report on achievement for fiscal 1998. Global environment industry technology development promotion project (the advanced technology survey and research project); 1998 nendo seika hokoiusho. Chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo (sentan gijutsu chosa kenkyu jigyo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    In order to structure innovative technologies to solve effectively the global environment problems, it is important to incorporate infra-structural technologies that have been achieved by universities and other research institutions. The fiscal 1998 project has commissioned 25 researches found superior from among research plans that have been invited during fiscal 1997. This paper enumerates the main themes including those under continued research. The research themes include: fixation of phosphor by using photo-energy, utilization of nitrogen fixing bacteria in rice plant roots for the purpose of carbon dioxide reduction, new functional solid ultra-strong acids for clean chemical processes, fixation of warming gases by using ultra critical fluid catalytic reactions, photo-catalysts having microporous structure, whose energy structure is controlled, waste water purification by using stimulation sensitive polymers, a practical and small high-speed environment purification system by means of a simple technology to cultivate high concentration bacteria of microorganisms, fundamental analysis of response to specific wavelength light in photosynthesized microorganisms, bio-remediation utilizing symbiotic systems of plants and bacteria, high efficiency catalysts purposed for total decomposition of water, and separation of carbon dioxide in deep sea bottoms by controlling hydrate crystal growth. (NEDO)

  5. FY 2000 report on the promotion projects by Research Institute of Innovative Technology for the Earth. Study on possibility of research exchanges; 2000 nendo chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo seika hokokusho. Kenkyu koryu kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Described herein are the results of the study on possibility of research exchanges, conducted by Research Institute of Innovative Technology for the Earth (RITE) in FY 2000. For development of thin-film catalysts, HTE, a venture developing combinatorial chemistry application to catalysts, is a potential partner for the exchanges. One of the technical problems involved in underground sequestration of CO2 relates to evaluation of the reactions between CO2 injected under pressure and the surrounding rocks. It is a less site-specific theme, and preferably pursued through international networks. The RITE delegates have visited the British Geological Survey, Canada's Alberta Research Council, and US's Pennsylvania State University, Rice University and Chevron Petroleum, finding research exchange possibilities in all of these organizations for broad technical themes related to underground sequestration of CO2. For energy conversion technologies using biomass resources as the source materials, the potential partners for the research exchanges include Swedish Royal Institute of Technology, Belgium's Catholic University of Louvain and Spain's University of Zaragona which leads researches in production of gases from wastes and biomass. (NEDO)

  6. Survey on utilization of database for research and development of global environmental industry technology; Chikyu kankyo sangyo gijutsu kenkyu kaihatsu no tame no database nado no riyo ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    1993-03-01

    To optimize networks and database systems for promotion of the industry technology development contributing to the solution of the global environmental problem, studies are made on reusable information resource and its utilization methods. As reusable information resource, there are external database and network system for researchers` information exchange and for computer use. The external database includes commercial database and academic database. As commercial database, 6 agents and 13 service systems are selected. As academic database, there are NACSIS-IR and the database which is connected with INTERNET in the U.S. These are used in connection with the UNIX academic research network called INTERNET. For connection with INTERNET, a commercial UNIX network service called IIJ which starts service in April 1993 can be used. However, personal computer communication network is used for the time being. 6 figs., 4 tabs.

  7. Investigational study of evaluation of the global energy system as a global environmental protection technology; Chikyu kankyo taisaku gijutsu toshite no global energy system no hyoka ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    With relation to some global energy systems of which viability is predicted in the future, an evaluation was conducted from the viewpoints of economical efficiency, energy balance, CO2 emission, etc. The fossil fuel CO2 capture system, the conventional thermal power plant added with CO2 recovery/treatment facilities, is expected to reduce approximately 70-75% of the CO2 emission. The fossil fuel decarbonated hydrogen system, which decarbonates fossil fuels, recovers/treats CO2 at the place of fuel supply and uses as hydrogen, is of poor practical application from an economical point of view. The fossil fuel methanol synthesis system, which synthesizes methanol from fossil fuels at the place of fuel supply, generates electric power and recovers/treats CO2 with the methanol, is large in energy loss and CO2 emission and low in overall efficiency and CO2 reduction effect at the time of methanol synthesis. The renewable energy hydrogen system is an ultimate system with no emission of CO2, though it costs much. 110 refs., 83 figs., 107 tabs.

  8. Investigations on a global environment improving technology utilizing biological functions. 2. Structuring a ligno-bioprocess; Seibutsu kino wo riyoshita chikyu kankyo kaizen gijutsu ni kansuru chosa. 2. Riguno bio process no kochiku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Discussions were given to reserve global environments on reducing dependence on fossil resources and more effectively utilizing wood resources. Economically utilizable amount of wastes from lumbering factories reaches about five million tons annually. Discussions were made on a ligno-bioprocess that uses these wastes. The current quantitative production efficiency of cellulase by means of bacterial breeding is very high. A problem is production of ligninolytic enzymes, to which application of the recombinant DNA method is indispensable. Combination of steam explosion with biological decomposition or the organosolv process is an effective method for lignin decomposition. Decomposition of cellulose by using the ultra critical water method is worth noticing. With respect to hemicellulose utilization, production of cellulose derivatives, biodegradable polymers and oligosaccharides would be conceivable by means of esterification and etherification. Vanillinic acid, adhesives, resins and lignin-based polymer materials could be manufactured from lignin. Material cost for these products accounts for about 35% of the product price, thus making the lignochemicals promising commercial products. 301 refs., 71 figs., 39 tabs.

  9. 'Nikkei Global Environment Technology Prize' awarded to the joint research group on regeneration of tropical forest; Nettairin saisei kyodo kenkyu ga 'Nikkei chikyu kankyo gijutsusho' wo jusho

    Energy Technology Data Exchange (ETDEWEB)

    Watanabe, T. [Kansai Electric Power Co. Inc., Osaka (Japan)

    1998-11-10

    The tropical forest regeneration technology research group of Kansai Electric Power Company and Kansai Environment Center has been performing the research and development of tropical forest regeneration technology jointly with Indonesia since fiscal 1992. The group was awarded with the Global Environment Technology Prize from Nihon Keizai Shimbun, Inc. As a result of stringent examination on 97 applications, being two times as many as in usual years, the group received high evaluation on the originality, reality and possibility of proliferation of its research, and impacts given to the societies. Two other groups were also selected. The achievements were reported by the representative of the group in the award commemoration lecture at the global environment economist summit held by the Nikkei press the same day. Conventionally, afforestation done with considerable efforts has often been lost by forest fires and slash-and-burn farming, whereas the present research aims at establishing a comprehensive afforestation technology considering social and economic aspects, and CO2 fixation. As one of the choices of flexible measures as a result of the effect of forests having been recognized in COP3, frameworks for utilizing the mechanisms of joint implementation and clean resource development were introduced. Ever increasing expectations are placed on the achievements of the present research works. (NEDO)

  10. Promotional operation for developing industrial technologies for global environment in fiscal 1998. International research exchange operation; 1998 nendo chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo. Kokusai kenkyu koryu jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    With an objective of creating a new scope of study intended of solving global environment problems and structuring a new technical system, exchanges with overseas researchers and research institutions have been carried out subsequent to those in last year. In fiscal 1998, six researchers from different countries were invited to implement joint researches, and two overseas researchers were invited to an international conference on industrial technologies for global environment. In addition, in order to identify trends of research and development in overseas countries, two researchers were sent to universities in Germany and the U.S.A., and three researchers to international conferences and symposiums on the industrial technologies for global environment. It was intended to exchange technological information between overseas researchers and Japanese researchers who are performing the advanced researches on the industrial technologies for global environment, and to proliferate the latest items of technological information. Therefore, seven international seminars have been held, including the '98 Japan-China Global Environment Protection Symposium, 'substance migration and carbon circulation in coral reefs', 'plant bio-technologies in the 21st century', and the Fourth International Forum for Environmental Catalysts. (NEDO)

  11. Fiscal 1990 technological survey report. Report on NEDO's 10th anniversary international symposium (New energy and global environment); NEDO soritsu 10 shunen kinen kokusai symposium hokokusho. Shin energy to chikyu kankyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-10-03

    Two lectures were given by Christopher Flavin (vice president for Research, Worldwatch Institute Inc.) and Hiroshi Takeuchi (chairman, LTCB Consulting and Research Institute Inc.), and a panel discussion was held by five panelists with Toyoaki Ikuta (The Institute of Energy Economics, Japan) as the coordinator. The themes were 'a sustainable energy strategy for the nineties', 'industrial structure change and energy problem', and 'new energy and the global environment'. The panelists were from Sweden, France, Thailand, U.S.A., and Japan. The main subject was energy security, in which discussion was held on the uneven distribution of oil resources in the Middle East and political instability in the region and on counter measures against global warming problem. The discussion on the latter subject showed that a limitation exists in the total consumption of fossil fuel in the world, and that energy policies were meaningless unless they were on a global scale. As the concrete measures, energy conservation technologies and regenerative energy utilization technologies need to be developed and spread, for which emphasized was the spread on a global scale, namely, the necessity of international cooperation and an international propulsion system. (NEDO)

  12. Research on the establishment of the database system for R and D on the innovative technology for the earth; Chikyu kankyo sangyo gijutsu kenkyu kaihatsuyo database system ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    For the purpose of structuring a database system of technical information about the earth environmental issues, the `database system for R and D of the earth environmental industrial technology` was operationally evaluated, and study was made to open it and structure a prototype of database. In the present state as pointed out in the operational evaluation, the utilization frequency is not heightened due to lack of UNIX experience, absence of system managers and shortage of utilizable articles listed, so that the renewal of database does not ideally progress. Therefore, study was then made to introduce tools utilizable by the initiators and open the information access terminal to the researchers at headquarters utilizing the internet. In order for the earth environment-related researchers to easily obtain the information, a database was prototypically structured to support the research exchange. Tasks were made clear to be taken for selecting the fields of research and compiling common thesauri in Japanese, Western and other languages. 28 figs., 16 tabs.

  13. Investigation on construction of the database system for research and development of the global environment industry technology; Chikyu kankyo sangyo gijutsu kenkyu kaihatsuyo database system no kochiku ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    1993-03-01

    This paper studies a concrete plan to introduce a new database system of Research Institute of Innovative Technology for the Earth (RITE) which is necessary to promote the industrial technology development contributing to solution of the global environmental problem. Specifications for system introduction are about maker selection, operation system, detailed schedule for introduction, etc. RITE inhouse database has problems on its operation system and its maintenance cost, and is apt to be high in a construction cost in comparison with a utilization factor. Further study is made on its introduction. Information provided by the inhouse database is only the one owned by the organization, and information outside the organization is provided by the external database. The information is registered and selected by the registerer himself. The access network is set by personal computer network at the beginning and is set to transit to INTERNET in the future. For practical construction of the system, it is necessary to make user`s detailed needs clear for the system design and to adjust functions between hardware systems. 32 figs., 9 tabs.

  14. Fiscal 1997 report on the survey of effects of enhancement of energy consumption efficiency on the global environment; 1997 nendo chosa hokokusho (energy shohi koritsuka chikyu kankyo eikyo chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper surveyed the state of studying the measures against global warming in the third assessment report of the Intergovernmental Panel on Climate Change (IPCC) and made analyses of the trends of preventive measures for global warming in other countries, aiming at presenting data for studying the future enhancement of energy consumption efficiency in the Asia Pacific region. In the U.S., a report was taken up from Executive Office of the President which is entitled `the federal government R and D of energy for solution to problems in the 21st century.` The report made analyses of the federal government R and D of energy and at the same time recommended an increase in R and D budget and reinforcement of the organization of the Department of Energy. In Europe, the carbon tax, CO2 tax, energy tax, etc. are introduced or studied for reduction of CO2 emissions. OECD made public a report approved in May 1997 which is entitled `the environmental tax and green tax reform.` Also studied were the introduction and effects of the carbon tax aiming at reducing CO2 emissions in developing countries. More attention is being paid to economic effects predicted in case developed countries reinforce various kinds of measures for targeted reduction of greenhouse gases. 2 figs., 4 tabs.

  15. Environmental science, petroleum engineer`s view. CO2 gas reduction technologies for global warming prevention; Sekiyu gijutsusha no shiten kara no kankyo kagaku. Chikyu ondanka eno taio no tame no CO{sub 2} yokusei gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Nomura, K [Tokyo (Japan)

    1998-08-01

    This paper discusses the techniques concerning diesel engines for cogeneration systems, techniques concerning fuel consumption-saving type lubricating oils and techniques concerning oil refineries, out of the CO2 emission control (energy saving) techniques for coping with the global warming which the petroleum engineers are now tackling. The paper introduces CO2 emission control techniques using a petroleum cogeneration system and studies on NOx removing techniques using catalysts as the techniques concerning diesel engines; techniques for reducing friction loss, which occurs in an engine and a transmission, by improving the recipes of lubricating oils and the development of novel friction modifiers as the fuel consumption-saving type lubricating oil techniques; and the CO2 separating techniques using a system for recovering the low-temperature waste heat produced in petroleum refinement with a high efficiency, or using a solid film such as a molecular sieve as the energy-saving techniques used in oil refineries. 18 refs., 8 figs., 1 tab.

  16. Promotional operation for developing industrial technologies for global environment in fiscal 1998. International research exchange operation; 1998 nendo chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo. Kokusai kenkyu koryu jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    With an objective of creating a new scope of study intended of solving global environment problems and structuring a new technical system, exchanges with overseas researchers and research institutions have been carried out subsequent to those in last year. In fiscal 1998, six researchers from different countries were invited to implement joint researches, and two overseas researchers were invited to an international conference on industrial technologies for global environment. In addition, in order to identify trends of research and development in overseas countries, two researchers were sent to universities in Germany and the U.S.A., and three researchers to international conferences and symposiums on the industrial technologies for global environment. It was intended to exchange technological information between overseas researchers and Japanese researchers who are performing the advanced researches on the industrial technologies for global environment, and to proliferate the latest items of technological information. Therefore, seven international seminars have been held, including the '98 Japan-China Global Environment Protection Symposium, 'substance migration and carbon circulation in coral reefs', 'plant bio-technologies in the 21st century', and the Fourth International Forum for Environmental Catalysts. (NEDO)

  17. Report on achievement in the preceding research related to global industry technologies for the global industry technology research and development project. Research on gas systems substituting global warming gases such as PFC used in manufacturing semiconductors; 1998 nendo chikyu kankyo sangyo gijutsu ni kakawaru sendo kenkyu. Handotai seizo nado ni shiyosuru PFC nado no chikyu ondanka gas no daitai gas system no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The present semiconductor manufacturing process uses a great amount of PFC having large global warming coefficients and extremely long atmospheric life. A research was made particularly on reduction of its emission from etching processes. After introducing how the semiconductor industry has been working conventionally on protection of the global environment, this paper makes clear the purpose and positioning of this preceding research, as well as how it is moved forward. The paper also reports the results of analyzing and discussing the exhaust gases from etching devices using several kinds of substitute PFC gases. Survey results are reported on the possibilities of new substitute gases, plasma decomposition and treatment of exhaust gases, reaction process simulation, and in-situ analyzing and evaluating technologies. Investigations were made on the possibility of using no PFC in wiring processes which consume greater amount of PFC, as well as on wiring techniques using inter-layer insulation film with low dielectric rate, a new wiring structure forming technology, new functional elements, circuits and systems in a wide range. Proposals were given on specific research and development themes and plans that begin in fiscal 1999. (NEDO)

  18. Study to take environmental symbiosis into consideration on housing construction. No.2. Experimental study on the thermal performance of K house in winter season; Kankyo kyosei ni hairyoshita sumai zukuri ni kansuru kenkyu. 2. Amagishi ni tatsu K tei no toki no onnetsu kankyo keisoku kekka

    Energy Technology Data Exchange (ETDEWEB)

    Nishikawa, K; Ishihara, O [Kumamoto University, Kumamoto (Japan)

    1996-10-27

    For the construction of houses that effectively utilize natural energy and impose less load on environments, an example of house building respecting environmental symbiosis is described. Reported herein are a heating system and the measurements of thermal environment in winter. In winter, the floor is heated by warm water from solar heat collectors circulating in pipes buried in downstair underfloor RC foundation. For the verification of the heating effect, comparison was made between the heater-provided southeast (SE) room and heater-unprovided northeast (NE) room, both downstairs. Warm water circulated in the underfloor pipes only in the daytime, the pipe surface recording the maximum of 32{degree}C in the daytime and the minimum of 17{degree}C early in the morning. At midnight, the SE room was warmer than the NE room by 2{degree}C. The slab surface in the SE room recorded 28{degree}C at the maximum and 17{degree}C at the minimum, but the temperature remained constant at 10{degree}C in the NE room. The rubble temperature was 17.5-20{degree}C in the SE room and approximately 11{degree}C in the NE room. It was noted that the SE room floor slab was capable of heat accumulation. The resident is a devotee of environmental symbiosis with mindset for enhancing natural energy utilization, burning an oil heater and a fireplace but intermittently. 1 ref., 12 figs., 1 tab.

  19. FY 1999 report on the results of the introductory study on the global environmental industry technology. Investigational study on the environmental creation technology by the application of ecosystem information functions; 1999 nendo chikyu kankyo sangyo gijutsu ni kakawaru sendo kenkyu seika hokokusho. Seitaikei joho kino oyo ni yoru kankyo sozo gijutsu ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    To know the state of environmental pollution before it clearly exists, an investigational study was made on the technology to measure environmental stress at high sensitivity, in wide range and at high speed using functions to respond chemical substances, etc. which living organisms have. The FY 1999 results were outlined. As to the application of ecosystem information functions, survey was conduced paying attention to the environmental stress response of each of the bacteria, algae, plants and animals, responses viewed from the manifestation of immunity antibodies which occurs inside living organisms and changes at genetic level, and responses of algae and plants in case of specifying environmental pollutants. In relation to the application of the biological amplification mechanism, survey was carried out on environmental stress signals sent from plants, selection of environmental stress index plants, detection of environmental pollutants using bacteria, high sensitivity detection using animal (nematode), etc. Concerning the standardization of the environmental measuring technology by the application of ecosystem information functions, survey was conducted on artificial molecular recognition sensor, antibody device sensor, biochips, system construction, etc. (NEDO)

  20. Fiscal 1996 report on the results of the R and D under a consignment from NEDO of the environment friendly type production technology. High-functional chemical synthesis bioreactor (for public); 1996 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Kankyo chowagata seisan gijutsu (kokino kagaku gosei bioreactor) kenkyu kaihatsu seika hokokusho (kokaiyo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of developing production technology of chemical substances which are resource conservative, energy saving and less in environmental loads, a R and D was conducted of a high-functional chemical synthesis bioreactor. The paper reported the results of fiscal 1996. As for proliferation control breeding technology, relating to the switch control technology of proliferation related genes by regulatory factors, the effectiveness on an incubator level was demonstrated, and at the same time improvement of reactor performance in using this technology was studied on paper. As to the manifestation control breeding technology, the actual design of the development of manifestation promotion technology by bent DNA, etc. was proceeded with, and at the same time the following were commenced: selection of bent DNA, confirmation of bent characteristics, and work of vector construction using candidate bent DNA. Further, the simple assessment system of manifestation vectors was constructed. In the development of bioreactor system technology, the actual design was started of the two-stage culture continuance system which separated proliferation and enzyme production. 48 refs., 41 figs., 6 tabs.

  1. Fiscal 1998 R and D project on global environmental industrial technology. R and D result report on environment- friendly production technology (advanced chemical synthesis reactor); 1998 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo. Kankyo chowagata seisan gijutsu (kokino kagaku gosei bio reactor) kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For high-efficiency production of substances by bioreactor, study was made on a bio-control mechanism as its elementary technology. On the study of breeding technology by expression control, the structure design of a control region and development of new expression vectors had been finished, and study was made on breeding of high-efficiency recombinant production cells by using candidate expression vectors. On the study of breeding technology by multi-stage enzyme reaction control, the enzyme gene of a system synthesizing cysteine from glycerol was searched, and hydroxypyruvaldehyde hydrogenase gene was isolated as substance production model. Cysteine production Escherichia coli combined with serineacetyl transferase gene was also prepared. In addition, study started on cloning of hydroxyacetone oxidase gene. On development of reactor system technology, for conversion of serine to cysteine, study was made on optimization of a reaction condition by theory of enzyme reaction rate. (NEDO)

  2. Leading research for fiscal 1998 on innovative technology for the earth. Researches on technologies for creating ecology using ecosystem's information transmitting function; 1998 nendo chikyu kankyo sangyo gijutsu ni kakawaru sendo kenkyu. Seiteikei joho kino oyo ni yoru kankyo sozo gijutsu ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The aim is to develop a technology for detecting environmental pollution before it becomes apparent and thereby to contribute to the development of technologies to minimize the damage that may be inflicted upon the global environment. For this purpose, researches are conducted in search of techniques to detect, at high speed with high sensitivity over a wide scope, the response of living organisms to chemicals. In a research on the application of the reaction of ecosystem to environmental stress, communication between living organisms in coping with environmental chemicals is investigated. It is then found that the growth of vegetable roots may be used as a measure for the detection of environmental pollutants but that the method is too low in sensitivity. A research is conducted on the creation of an ecological reporter function using the biological amplification technique. It is then found that the immunoreaction-aided measuring of environmental pollutants yields an excellent result in terms of sensitivity but that it has a problem in its resistance to environmental conditions. In a research on the standardization of environmental measurements using ecological information, it is found that the primary object of research and development should be a systematization technology compatible with biological functions. (NEDO)

  3. Leading research for fiscal 1998 on innovative technology for the earth. Researches on technologies for creating ecology using ecosystem's information transmitting function; 1998 nendo chikyu kankyo sangyo gijutsu ni kakawaru sendo kenkyu. Seiteikei joho kino oyo ni yoru kankyo sozo gijutsu ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The aim is to develop a technology for detecting environmental pollution before it becomes apparent and thereby to contribute to the development of technologies to minimize the damage that may be inflicted upon the global environment. For this purpose, researches are conducted in search of techniques to detect, at high speed with high sensitivity over a wide scope, the response of living organisms to chemicals. In a research on the application of the reaction of ecosystem to environmental stress, communication between living organisms in coping with environmental chemicals is investigated. It is then found that the growth of vegetable roots may be used as a measure for the detection of environmental pollutants but that the method is too low in sensitivity. A research is conducted on the creation of an ecological reporter function using the biological amplification technique. It is then found that the immunoreaction-aided measuring of environmental pollutants yields an excellent result in terms of sensitivity but that it has a problem in its resistance to environmental conditions. In a research on the standardization of environmental measurements using ecological information, it is found that the primary object of research and development should be a systematization technology compatible with biological functions. (NEDO)

  4. X-ray Fluorescence Core Scanning of Oman Drilling Project Holes BT1B and GT3A Cores on D/V CHIKYU

    Science.gov (United States)

    Johnson, K. T. M.; Kelemen, P. B.; Michibayashi, K.; Greenberger, R. N.; Koepke, J.; Beinlich, A.; Morishita, T.; Jesus, A. P. M.; Lefay, R.

    2017-12-01

    The JEOL JSX-3600CA1 energy dispersive X-ray fluorescence core logger (XRF-CL) on the D/V Chikyu provides quantitative element concentrations of scanned cores. Scans of selected intervals are made on an x-y grid with point spacing of 5 mm. Element concentrations for Si, Al, Ti, Ca, Mg, Mn, Fe, Na, K, Cr, Ni, S and Zn are collected for each point on the grid. Accuracy of element concentrations provided by the instrument software is improved by applying empirical correction algorithms. Element concentrations were collected for 9,289 points from twenty-seven core intervals in Hole BT1B (basal thrust) and for 6,389 points from forty core intervals in Hole GT3A (sheeted dike-gabbro transition) of the Oman Drilling Project on the D/V Chikyu XRF-CL during Leg 2 of the Oman Drilling Project in August-September, 2017. The geochemical data are used for evaluating downhole compositional details associated with lithological changes, unit contacts and mineralogical variations and are particularly informative when plotted as concentration contour maps or downhole concentration diagrams. On Leg 2 additional core scans were made with X-ray Computed Tomography (X-ray CT) and infrared images from the visible-shortwave infrared imaging spectroscopy (IR) systems on board. XRF-CL, X-ray CT and IR imaging plots used together provide detailed information on rock compositions, textures and mineralogy that assist naked eye visual observations. Examples of some uses of XRF-CL geochemical maps and downhole data are shown. XRF-CL and IR scans of listvenite clearly show zones of magnesite, dolomite and the Cr-rich mica, fuchsite that are subdued in visual observation, and these scans can be used to calculate variations in proportions of these minerals in Hole BT1B cores. In Hole GT3A XRF-CL data can be used to distinguish compositional changes in different generations of sheeted dikes and gabbros and when combined with visual observations of intrusive relationships the detailed geochemical

  5. The first microbiological contamination assessment by deep-sea drilling and coring by the D/V Chikyu at the Iheya North hydrothermal field in the Mid-Okinawa Trough (IODP Expedition 331

    Directory of Open Access Journals (Sweden)

    Katsunori eYanagawa

    2013-11-01

    Full Text Available During the Integrated Ocean Drilling Program (IODP Expedition 331 at the Iheya North hydrothermal system in the Mid-Okinawa Trough by the D/V Chikyu, we conducted microbiological contamination tests of the drilling and coring operations. The contamination from the drilling mud fluids was assessed using both perfluorocarbon tracers (PFT and fluorescent microsphere beads. PFT infiltration was detected from the periphery of almost all whole round cores. By contrast, fluorescent microspheres were not detected in hydrothermally active core samples, possibly due to thermal decomposition of the microspheres under high-temperature conditions. Microbial contamination from drilling mud fluids to the core interior subsamples was further characterized by molecular-based evaluation. The microbial 16S rRNA gene phylotype compositions in the drilling mud fluids were mainly composed of sequences of Beta- and Gammaproteobacteria, and Bacteroidetes and not archaeal sequences. The phylotypes that displayed more than 97% similarity to the sequences obtained from the drilling mud fluids were defined as possible contaminants in this study and were detected as minor components of the bacterial phylotype compositions in 13 of 37 core samples. The degree of microbiological contamination was consistent with that determined by the PFT and/or microsphere assessments. This study suggests a constructive approach for evaluation and eliminating microbial contamination during riser-less drilling and coring operations by the D/V Chikyu.

  6. FY 1999 report on the results of the R and D project on the industrial technology for the global environment. R and D of the prediction technology of environmental effects brought by CO2 ocean sequestration (Ocean survey and development of evaluation technology for CO2 sequestration ability); 1999 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo NEDO seika hokokusho. Nisankatanso no kaiyo kakuri ni tomonau kankyo eikyo yosoku gijutsu kenkyu kaihatsu (Kaiyo chosa oyobi CO2 kakuri noryoku hyoka gijutsu no kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Assuming the melting and sequestration of CO2 at the intermediate depth of the sea area around Japan, study of evaluation technology of CO2 sequestration ability in ocean was studied, and the FY 1999 results were summed up. In the ocean survey, survey was conducted by ship (No.2 Hakurei-maru) mainly at typical observation points and traverse lines of long. 147 E and long. 155 E. In the survey, the following data were acquired: data on seawater density and chemical tracer, data on release of intermediate-depth/independent buoys, concentration distribution of carbonic acid base substances/nutrient salts/chlorophyll, data on the existing amount of marine organisms and primary production speed measurement experiment, data on experiment on CO2 on-board exposure to organisms in the intermediate depth of ocean, etc. In the measurement/analysis of the sediment particle flux amount, sediment traps were installed/recovered. Further, for the purpose of measuring the neutralizing effect of calcium carbonate, operation test on CaCO{sub 3} melting experimental equipment was conducted in the actual sea area. In the development of a model for evaluation of CO2 sequestration ability, carried out were the improvement of the model using the inverse method, study of the estimated accuracy using the ocean observation data, etc. (NEDO)

  7. Fiscal 1996 report on the results of the study under a consignment from NEDO of environmental friendly type metal base-materials recycling utilization basic technology and element/overall process. For public; 1996 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko kyodo kenkyu itaku. Kankyo chowagata kinzokukei sozai kaisei riyo kiban gijutsu no kenkyu: yoso sogo process kenkyu seika hokokusho (kokaiyo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    A study of `the next generation new iron steel making process` was conducted in which impurity elements in scrap are removed and recycled into high quality steel making materials, and at the same time total emissions are reduced during the process from scrap melting to steel making. The paper reported the fiscal 1996 results. In the study of the scrap recycling process, conducted were a study of the total system to remove impurities in the high temperature preheating furnace, a large scale experiment of de-coaling combined type de-coppering/de-tinning under reduced pressure of iron melting, a study of recycling technology of dust to the scrap melting furnace, etc. In the study on preheating/melting technology, a study of the scrap melting furnace of high-productivity/low-energy vertical type, a study of the scrap preheating method using the packed bed type preheating furnace, a study on the flue gas control at the time of preheating/melting, a study of the fast assessment method for organic compounds in flue gas, etc. In the evaluation of the total system, a study of preheating/melting/environmental systems using experimental plants. 20 refs., 23 figs., 10 tabs.

  8. Report on achievements of commissioned studies on research and development of a technology to apply human senses to measurements in fiscal 1994. 2. Main issue (Part 6 for investigative research of a simulated environment presenting technology); 1994 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu. 2. Honronhen. Mogi kankyo teiji gijutsu chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    This paper describes the achievements of researches on the 'conceptual design of a simulated environment presenting device'. Based on the basic reasons for requiring the simulated environment presenting device, and based on the current investigations on environmental conditions demanded on this device and experimental facilities in the studies of human sense measuring technologies, the paper presents how the simulated environment presenting device should be used in this project. It also describes the 'investigative research on parameters and methods to evaluate artificial environments' having been performed to establish the research ideas of the experimental studies using the simulated environment presenting device. As a result of the discussions, the most preferable pattern evaluated is a satellite-type simulated environment facility that presents sound, warm heat, and visual environment, when considerations are given to the first term study as to its progress and budgetary scale. In order to further expand the research, the findings obtained from the result of the basic sense measurements may be verified into a comprehensive survey, and conceptual plans may be established on mobile facilities to arrange data that cover a wide area, and on a composite environment facility that can simulate the actual space to serve for the promotion programs for the future projects. (NEDO)

  9. Report on achievements of research and development of a technology to apply human senses to measurements in fiscal 1992. 3. Research and development of a simulated environment presenting technology; 1992 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu. 3. Mogi kankyo teiji gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-03-01

    This paper describes the simulated environment presenting technology, extracted from the achievements in the development of a technology to apply human senses to measurements in fiscal 1992. Methods to present, evaluate and improve composite acoustic environment handle the effects compounded of air propagating sound, solid propagating sound, and low frequency sound, and researches are being performed to elucidate noise evaluation indexes. A composite acoustic environment presenting device was designed, part of which has been fabricated. In the research of a radiation model that serves for enhancing working environment, development was made on a manually controlled artificial sunlight radiation device model. To simulate the kaleidoscopically changing spectral radiation intensity in the nature, the existing filters are insufficient, and development of a new system was necessary. Therefore, the developed and fabricated artificial sunlight radiation device was provided with a function that can simulate different natural sun beams in the manner of envelope approximation. In addition, the device was provided with ultra-violet ray cutting function to make it safe for human body. In the research of high-accuracy real visual sense recognition, a high-speed prototyping system, an improved sensor system, and a contact software were prepared. The intended targets were basically achieved. (NEDO)

  10. FY 1991 report on the results of the contract R and D of the human sense measuring application technology. 3. R and D of a technology to present the mock environment; 1991 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu seika hokokusho. 3. Mogi kankyo teiji gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-03-01

    As a part of the R and D of a technology to present the mock environment, the following R and D were conducted: (1) method to estimate thermal amenity by life scene of worker; (2) radiation model contributing to improvement of working environment; (3) methods to measure/evaluate/improve the combined environment of working environment/living environment at power plants. In (1), the following were carried out: development of equipment to present thermal environment by life scene and by human body part; measurement of thermal environment; measurement of physiological reaction; measurement of mental reaction; construction of human body thermal model. In (2), the target of the R and D is to develop artificial solar radiation equipment by which the outdoor natural radiation environment can be simulated. The targeted reproduced wave length area of photovoltaic unit model is 400-20,000nm. Therefore, in FY 1991, the selection of photovoltaic unit model parts was experimentally confirmed. The sheet exothermic body of the solar heat reproducing wall heater model was experimentally evaluated to study applicability. In (3), the paper took up 'a study on a method to present/evaluate/improve the composite environment,' and made a basic study on a method to measure/evaluate air transmission sound/solid transmission sound/low-frequency sound. (NEDO)

  11. Report on achievements of research and development of a technology to apply human senses to measurements in fiscal 1995. 2. Main subject (Part 2. Research and development of an environment compatible indexing technology); 1995 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu. 2. Honronhen (Kankyo tekigosei shihyoka gijutsu no kenkyu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This paper describes the environment compatible indexing technology, extracted from the achievements in the development of a technology to apply human senses to measurements in fiscal 1995. In an experiment to evaluate subjectivity on compatibility to sound and vibration environments, the background sound was presented three-dimensionally by using a composite acoustic environment presenting device. Psychological effects in different acoustic environments were elucidated. In thermal comfort by living scenes of workers according to a human body thermal model, wide applicability of the model was suggested. In analyzing the model for climate inside apparels, the conditions on skin surface derived from the human body thermal model by each time step and the surrounding environmental conditions were used as the boundary condition. Then, calculation was performed on the apparel thermal model, whose result was used as the boundary condition to solve the subsequent steps. In experimenting and verifying the human body thermal model, the hand calorimeter was found capable to measure heat dissipation efficiently, and useful for simulating the body temperature adjusting mechanism. It is also capable of discussing the role of blood flow played in heat dissipation. For the indexes to evaluate composite environmental compatibility, a fuzzy theory was used to analyze subjectivity volume data of the subjects in order to evaluate effects of warm heat, light beam, and acoustic environment on the workability. (NEDO)

  12. FY 1991 report on the results of the contract R and D of the human sense measuring application technology. 3. R and D of a technology to present the mock environment; 1991 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu seika hokokusho. 3. Mogi kankyo teiji gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-03-01

    As a part of the R and D of a technology to present the mock environment, the following R and D were conducted: (1) method to estimate thermal amenity by life scene of worker; (2) radiation model contributing to improvement of working environment; (3) methods to measure/evaluate/improve the combined environment of working environment/living environment at power plants. In (1), the following were carried out: development of equipment to present thermal environment by life scene and by human body part; measurement of thermal environment; measurement of physiological reaction; measurement of mental reaction; construction of human body thermal model. In (2), the target of the R and D is to develop artificial solar radiation equipment by which the outdoor natural radiation environment can be simulated. The targeted reproduced wave length area of photovoltaic unit model is 400-20,000nm. Therefore, in FY 1991, the selection of photovoltaic unit model parts was experimentally confirmed. The sheet exothermic body of the solar heat reproducing wall heater model was experimentally evaluated to study applicability. In (3), the paper took up 'a study on a method to present/evaluate/improve the composite environment,' and made a basic study on a method to measure/evaluate air transmission sound/solid transmission sound/low-frequency sound. (NEDO)

  13. FY 2000 Project of developing international standards for supporting new industries. Standardization of the marine environment analyzers (Analyzers for measuring CO2 in ocean); 2000 nendo shinki sangyo shiengata kokusai hyojun kaihatsu jigyo seika hokokusho. Kaiyo kankyo keisoku kiki (kaiyo CO2 sokutei kanren kikirui) no hyojunka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Described herein are the FY 2000 results of the research and development of analyzers and analytical procedures necessary for evaluating CO2 abatement effects and fixed quantities in ocean, for proposing the international standards. The program for studying the analytical procedures makes a literature survey mainly on papers and also on patent publications, to collect the data related to this project and establish the database. The program for measuring CO2 in deep ocean studies a suspension type CO2 profiler with a liquid-liquid leveler and develops a small-size, high-precision device serviceable at a depth of 3,000m, around 1m in length and 40kg in weight. The program for flux meters tests various commercial sensors, to obtain the design requirements for the sensor of improved functions to withstand splashes and rolling/pitching. The program for CO2 flux measurement methods study aims at the eddy correlation method, which is the most direct procedure involving limited number of assumptions, after having investigated various procedures, to improve precision of the sensor. (NEDO)

  14. FY 2000 report on the study of energy conservation by industrial field recycling of global warming gas as a policy for the global environmental problem and the survey of international cooperation application; 2000 nendo chikyu kankyo mondai taisaku to shite no ondanka gas no sagyo bun'ya recycle ni yoru sho energy ka kento to kokusai kyoryoku tekiyo chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    In this report, for Japan and typical developing countries and for the CO2 emitted from the combustion process of the fixed type exhaust source which is easy in recovery, technical problems and economical problems were made clear in case of using the recovered CO2 for the industrial field, and at the same time, effects of the energy conservation were studied. As to CO2, the two methods were considered: a method to use the recovered CO2 as it is and a method to use the carbon compound obtained by reducing CO2 by any method. Further, in the industrial field, there are a lot of industries which use CO2, carbon, methanol, etc., and in the present situation fossil fuel is used for production materials such as CO2, carbon and methanol. As substitutes for fossil fuels for the industries using these hydrocarbons as raw material, the use of the recovered CO2 and the synthesized hydrocarbon was considered. And, survey was made of the applicable industrial fields, the amount of the recovered CO2 use there, and effects of energy conservation by reduction in amount of the fossil fuel use. (NEDO)

  15. FY 2000 report on the promotion projects by Research Institute of Innovative Technology for the Earth. Proceedings of the international seminar (Reports on photosynthetic CO2-assimilating enzymes by the international workshops); 2000 nendo chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo kokusai seminar jigyo shiryo. Kogosei CO2 kotei koso kokusai workshop hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Described herein are the reports on photosynthetic CO2-assimilating enzymes, presented to the international symposium. These enzymes are important for assimilating CO2 in air, maintaining the environments and production of foods. For genes and proteins, the topics include diversification and function evolution of the RuBisCO (ribulose 1,5-bisphosphate carboxylase/oxygenase) in the natural environments, in particular in microorganisms. For activity regulation of PEPC, the topics include three-dimensional structures of PEPC and phosphorylation mechanisms and activity regulation therefor. For activity regulation of RuBisCO, the topics include post-translational activity of the enzymes (e.g., methylated enzyme); molecular regulation mechanisms involved in the biosynthesis and decomposition of RuBisCO; and activity regulation mechanisms in the chloroplast. For leaf photosynthesis and RuBisCO, the topics include importance of enzymes and involved in-vivo reaction steps for leaf photosynthesis CO2 assimilation reactions. For function of PEPC, the topics include the biochemically and molecular biologically necessary and sufficient conditions for the C4 mechanism as the special photosynthesis mechanism. For transgenic approaches, the topics include procedure for allowing the RuBisCO gene of a dissimilar organism to function in the tobacco chloroplast, and introduction of enzymes involved in the C4 photosynthesis pathway in C3 plants. (NEDO)

  16. Initiative research in fiscal 2000 in relation with global environment industrial technologies. Achievement report on investigations and researches of emission-free manufacturing (EFM); 2000 nendo chikyu kankyo sangyo gijutsu ni kakawaru sendo kenkyu seika hokokusho. Emission free manufacturing (EFM) no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Three working groups were established, each having assignments of developing a technology to evaluate environmental load imposed by processing processes, developing a new manufacturing process intended of reducing environmental load, and remarkably improving the existing manufacturing technologies. Investigations and researches were performed on the current technological trends and technological problems in relation with emission-free manufacturing. In the environmental load evaluation technology, it was indicated that the amount of charged energy per one million yen of products made by metal machine tools is 10040 Gcal/M yen, and that, with regard to CO2 emission amount and resource depleting load at the small machining center, the amounts attributable to the raw materials are 80% and 90% respectively, wherein either item can be reduced by recycling iron. For the comprehensive low-emission processing technology, investigations were carried out on a casting process not using sandmolds, substitute lubricants, dry forging, semi-solid processing, and deep drawing process using ultra-high pressure water. For the functional low-emission production technology, investigations were performed on performance improvement in processing machines, energy saving, and reduction in emission. (NEDO)

  17. FY 2000 report on the promotion projects by Research Institute of Innovative Technology for the Earth. Proceedings of the international seminar (Reports presented to the international workshop for selective oxidation catalysts); 2000 nendo chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo kokusai seminar jigyo shiryo. Sentaku sanka shokubai kokusai workshop hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Described herein are the FY 2000 results of the international workshop for selective oxidation catalysts, promoted by RITE. The session of methane activation includes a comprehensive lecture on designs of selective alkane oxidation catalysts developed since the 1980s, describing the simplified catalyst design procedures and, at the same time, pointing out the vapor-phase reactions governing the overall reactions at high temperature. The session of alkane oxidation includes a lecture on oxidation of ethane into acrolein in the presence of a silica catalyst supporting isolated active sites, stressing necessity for controlling the vapor-phase reactions and importance of isolating the active sites. The session of crystalline materials includes a lecture on Ti-siting in Ti-containing molecular sieve and selective oxidation catalyst functions, concentrating discussion on oxidation with H{sub 2}O{sub 2} as the oxidant on TS-1. The session of engineering hybrid includes a lecture on catalytic partial oxidation of alkanes in millisecond reactors, describing that possibility of controlling the vapor-phase reactions in the presence of monolith, porous-plate catalysts in a reactor through which the reactant gases pass in a very short time, of the order of millisecond. (NEDO)

  18. FY 1999 report on the results of the introductory study on the global environmental industry technology. Study of the technology to recycle organic waste as resource in the chemical industry; 1999 nendo chikyu kankyo sangyo gijutsu ni kakawaru sendo kenkyu seika hokokusho. Kagaku kogyo ni okeru yukisei haikibutsu no saishigenka gijutsu no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    An investigational study was conducted of applicability/viability of the technology to recycle as resource the organic waste and CO2 discharged from the chemical industry, etc., and the FY 1999 results were summarized. As to the production of hydrogen from the organic waste, a bioreactor was developed which enables the production of hydrogen of 58 mmol/L/hr using Enterobactor aerogenes by the isolation bacteria method, and it successfully enabled the production of hydrogen from biomass resource. Further, the micro-flora method can be responded to a variety of substrates, but in this method the hydrogen production rate is not as high as in the isolation bacteria method at the present time. Concerning the method to convert CO2 to useful organic resource by the hydrogen produced, an experimental value of the maximum production rate of 149g/L/d which is high was obtained in case of acetic acid. Moreover, the paper described an outline and the basic concept of the recycle system of energy and carbon resource which integrates the production of energy from organic waste being considered at the present time and the production of useful matters from CO2. (NEDO)

  19. Fiscal 1997 Project related to research and development of global environment industrial technologies. Report on the results of works commissioned for research and development of technology for reducing carbon dioxide emissions; 1997 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu kanren jigyo. Nisanka tanso nado haishutsu teigen gijutsu kenkyu kaihatsu itaku gyomu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    With an objective of achieving reduction in emission of carbon dioxide and fluorocarbons, the `research and development on technologies to reduce emission of carbon dioxide and other substances` consisting of eight projects were conducted. In research and development of waste water treatment technologies using submerged combustion, studies were performed on removal by combustion of such pollutants as organic compounds, nitrogen compounds, and sulfur compounds. The development targets were achieved on each item. In research and development related with thermal electric power generation elements, semiconductor single crystals were fabricated in order to acquire technical knowledge on thermal power generation elements intended of utilizing industrial waste heat, whereas a simulation technology for designing was developed. In other projects, research and development works were carried out on high-performance heat insulating materials, and a movable methanol reformer for fuel cells. Developments were conducted on a large pressure reducing valve, and a cooling and heating turbo heat pump for regional air conditioning facilities. Research and development were made on Peltier elements, all efforts having achieved results respectively. 134 figs., 65 tabs.

  20. FY 2000 report on the promotion projects by Research Institute of Innovative Technology for the Earth. Projects for international research exchanges and international seminars; 2000 nendo chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo chosa hokokusho. Kokusai kenkyu koryu jigyo / kokusai seminar kaisai jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Described herein are the results of the international research exchange projects promoted by Research Institute of Innovative Technology for the Earth (RITE) in FY 2000. The international research exchanges are important for creation of new research areas and technological systems for solving the global environmental problems. In order to promote these activities, RITE invites and dispatches researchers to international conferences and symposiums, promotes research exchanges with major foreign research institutes and academic organizations, and invites and dispatches researchers for medium to long periods. These projects promote exchanges of the latest researches with various institutes, both domestic and foreign, and confirm that the research and development projects now RITE is promoting are closely related to those promoted by various organizations. In the FY 2000, RITE invites 5 foreign researchers for joint researches, and invites 3 foreign researchers to international conferences. RITE also dispatches 3 Japanese researchers to American and European universities, and 12 Japanese researchers to international conferences and the like, to effectively promote the domestic researches and grasp development tendencies at institutes of various countries. RITE holds 5 international seminars for exchanging and discussing broad topics over advanced researches related to global environmental technologies by researchers, both domestic and foreign. (NEDO)

  1. Environments of ocean and primary productivity during the late Quaternary. Millenial-scale large and abrupt climatic changes (global system dynamics in response to Dansgaard-Oeschger cycles); Daiyonki koki no kaiyo kankyo to seibutsu seisan. Suhyaku-susennen scale no kyugekina kiko hendo (Dansgaard-Oeschger cycle ni taisuru chikyu system no oto)

    Energy Technology Data Exchange (ETDEWEB)

    Tada, R. [The University of Tokyo, Tokyo (Japan)

    1998-04-25

    Abrupt and steep climate changes of the millennial scale as represented by the Dansgaard-Oeschger cycle (D-O cycle) and the behavior of the global surface layer system in their wake are outlined. The D-DO cycle is the abrupt and steep climate changes that are recorded in the Greenland continental ice sheet, and is grasped most typically as changes in the oxygen isotopic ratio in the ice. Studies reveal that the D-O cycle is a global episode that accompanied interaction between various subsystems constituting the global surface layer system. It is believed that in the D-O cycle there were changes not only in temperature but also in aridity/moisture and in the sea level, and probabilities are high that there was a great local variation in the way the changes took effect. The possibility has now become lower that the D-O cycle occurred in the interglacial epoch in the high latitude belt in the northern hemisphere, yet it remains likely that the climate changes driving the D-O cycle continued in the low latitude belt. 57 refs., 8 figs.

  2. Fiscal 1997 report on the investigational research on the evaluation of a global energy system as global environmental protection technology. 2; 1997 nendo chosa hokokusho (chikyu kankyo taisaku gijutsu to shite no global energy system no hyoka ni kansuru chosa kenkyu). 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    An energy supply system which is globally formed for global environmental protection is called a global energy system (GES), in which to achieve substantial CO2 reduction, various measures against CO2 are introduced to energy systems extending from places of fuel supply to places of fuel consumption. For the study of a scenario for introduction such a GES, it is necessary to investigate the GES presently proposed and make a traverse evaluation of it under uniform preconditions and evaluation criteria. Concretely, following a case study of evaluating performance of the GES with a power system as the final form from viewpoints of economy, energy balance, CO2 emissions, etc., the paper arranged characteristics of liquid fuel supply systems including methanol from a traverse aspect, made evaluation of performance and possibilities of the introduction in the areas concretely named, and studied positioning of this energy system, scenario for the future introduction and possibilities of the introduction from global and long-term aspects. 79 refs., 102 figs., 77 tabs.

  3. FY 2000 report on the results of the project for the promotion of industrial technology development for the global environment. Project on the investigational research of high technology; 2000 nendo NEDO seika hokokusho. Chikyu kankyo sangyo gijutsu kaihatsu suishin jigyo - Sentan gijutsu chosa kenkyu jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    High-tech study was conducted for fields of CO2 fixation/effective utilization, technical development of low environmental load substances and technical development of environmentally friendly type production process, and the FY 2000 results were summarized. Out of the proposals for research projects collected in FY 1999, 25 projects that were recognized to be excellent were consigned to contract research. Research Institute of Innovative Technology for the Earth also selected 4 projects for research. Through research activities, 179 projects were made public, and 2 patents were applied for. The number of research themes was 29 including the following themes: development of food resource resistant to the future global environment, study on new circulation type polymer chemical recycling by bio-process, development of dioxin decomposition technology using artificial enzyme and absorption resin, design of rare metal free cathode substance for large lithium ion secondary battery, and reforming of carbon circulation system in the Australian desert by natural humus supply. (NEDO)

  4. Fiscal 1996 global environmental industry technology research related project. Report on the results of the consignment project of research and development of technology for reducing carbon dioxide emissions; 1996 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu kanren jigyo. Nisanka tanso nado haishutsu teigen gijutsu kenkyu kaihatsu itaku gyomu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of reducing emissions of carbon dioxide, freon, etc., a research project was carried out of `Research and development of technology for reducing carbon dioxide emissions` which consists of 8 projects. The paper reported the results of the projects. The projects are: (1) Development of waste water treatment of submerged combustion system, (2) Development of thermoelectric generating devices, (3) Development of high performance heat insulation materials, (4) Development of methanol reformer for transportable fuel cell, (5) Development of large pressure reducing valves, (6) Development of large-scale turbo heat pump for district heating and cooling plants, (7) Development of heat pumps for transportation equipment, and (8) Development of thermoelectric cooling devices. In (1), the waste water treatment test was conducted and reached the target. In (2), the thermoelectric device using powder sintering element obtained performance twice the performance level of the existing device. In (3), (4), (5) and (6), the target was all reached. In (7), the results well agreed in a comparison between structural analysis and experiment. The cooling unit by the SPS sintering method using Bi-Te system sintered material element obtained the cooling efficiency almost the same as that by the freon compressor method. 8 refs., 161 figs., 63 tabs.

  5. Fiscal 1996 report on the results of the R and D under a consignment from NEDO of the technology to fix and effectively use carbon dioxide using bacteria and microalgae (for public); 1996 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku (saikin sorui nado riyo nisanka tanso koteika yuko riyo gijutsu kenkyu kaihatsu seika hokokusho (kokaiyo))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the purpose of contributing to the solution to the global environmental problem, a technology is developed in which by searching for/breeding/developing bacteria, etc. which conduct photosynthesis highly effectively, CO2 is fixed and recycled. The fiscal 1996 R and D is outlined as the utilization of bacteria, microalgae, etc. Obtained were microalgae exceeding the conventional strains in CO2 fixation ability, and bacteria/microalgae excellent in production of polysaccharides, hydrocarbon, lipid, biological active substances, etc. The fundamental study was continued of CO2 integrated enzyme function/reaction system as molecular biological breeding. In the cell fusion, a set-up of conditions for green algae was started. For the confirmation of performance of high dense/quantity culture technology using solar light, further improvement of performance and systematization, 200L scale testing equipment was manufactured. It is a collective reactor and enabled study of ventilation/agitation and control of light strength. A reactor analysis model was constructed. Also including the conversion into useful substances, energy/material balance was systematically studied. Collection of technical literature and information exchanges were made in Japan and overseas. 276 refs., 475 figs., 156 tabs.

  6. FY 2000 report on the results of the project on the R and D of the global environmental industry technology. R and D of the technology for predicting environmental effects associated with the CO2 ocean sequestration (Development of the technology for predicting environmental effects in the area around the CO2 discharge point and survey for supporting study); 2000 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo. Nisanka tanso no kaiyo kakuri ni tomonau kankyo eikyo yosoku gijutsu kenkyu kaihatsu (CO2 horyuten shuhen'iki no kankyo eikyo yosoku gijutsu no kaihatsu narabini kenkyu shien chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-03-01

    To obtain the technical outlook for CO2 ocean sequestration by CO2 discharge into the intermediate layer, the R and D was conducted of the technology for predicting environmental effects in the area around the CO2 discharge point, and the FY 2000 results were summed up. In the elucidation study of the behavior at the time of discharging liquid CO2, the melting process of CO2 droplets discharged/dispersed into the seawater of the intermediate layer was observed, and the specific phenomenon of hydrate formation in the process of CO2 droplet formation was grasped. As to the technology for sending CO2 into the ocean and diluting it, experimental study was made of CO2 transportation technology from on the sea to the intermediate layer, technology for rapid dilution immediately after discharge, etc. About the indoor experiment on the CO2 influence on marine organisms, experiment on the CO2 influence was carried out using shells, sea urchin, red sea bream, etc. In the developmental study of models for predicting environmental effects in the area around the CO2 discharge point, the 3D two-phase flow LES model was developed as a model for predicting the CO2 behavior, and the simulation of the liquid CO2 discharge was made at the planned experimental site. The model for evaluation of the biological influence was also made which can consider the interaction between two kinds of organisms. (NEDO)

  7. FY 1999 report on the results of the R and D project on the industrial technology for the global environment. R and D of the prediction technology of environmental effects brought by CO2 ocean sequestration (Development of prediction technology of environmental effects around the point of CO2 discharge and the research support survey); 1999 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo NEDO seika hokokusho. Nisankatanso no kaiyo kakuri ni tomonau kankyo eikyo yosoku gijutsu kenkyu kaihatsu (CO2 horyuten shuhen'iki no kankyo eikyo yosoku gijutsu no kaihatsu narabini kenkyu shien chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the purpose of studying viability of CO2 ocean sequestration by discharging it at the intermediate depth of ocean, the R and D were conducted of 'prediction technology of environmental effects around the point of CO2 discharge,' and the FY 1999 results were summarized. In the study of elucidation of behavior of liquid CO2 at the time of discharge, melting speed of CO2 in water and seawater, 2D CO2 concentration distribution, etc. were measured using the circulation type deep-sea simulation experimental equipment. In the study of technology to send CO2 into the sea and dilute it, the process test using mock liquid was conducted. In the indoor experiment on CO2 effects on marine organisms, conducted were the detailed experiment on long-term effects of low concentration CO2 on sea urchins and shellfish, experiment on CO2 acute effects on eggs/fry and experiment on CO2 effects on adult fish. In the developmental study of the model to predict environmental effects around the point of CO2 discharge, carried out were the improvement of the model for prediction of effects on marine organisms, study of the CO2 diffusion in topographic features supposed to be Hawaii, etc. In the international joint study, measurement/observation technology, facilities, etc. were studied in preparation for the experiment actually conducted in the sea. (NEDO)

  8. FY 1999 report on the results of the R and D project on the industrial technology for the global environment. R and D of the prediction technology of environmental effects brought by CO2 ocean sequestration (Development of prediction technology of environmental effects around the point of CO2 discharge and the research support survey); 1999 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo NEDO seika hokokusho. Nisankatanso no kaiyo kakuri ni tomonau kankyo eikyo yosoku gijutsu kenkyu kaihatsu (CO2 horyuten shuhen'iki no kankyo eikyo yosoku gijutsu no kaihatsu narabini kenkyu shien chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the purpose of studying viability of CO2 ocean sequestration by discharging it at the intermediate depth of ocean, the R and D were conducted of 'prediction technology of environmental effects around the point of CO2 discharge,' and the FY 1999 results were summarized. In the study of elucidation of behavior of liquid CO2 at the time of discharge, melting speed of CO2 in water and seawater, 2D CO2 concentration distribution, etc. were measured using the circulation type deep-sea simulation experimental equipment. In the study of technology to send CO2 into the sea and dilute it, the process test using mock liquid was conducted. In the indoor experiment on CO2 effects on marine organisms, conducted were the detailed experiment on long-term effects of low concentration CO2 on sea urchins and shellfish, experiment on CO2 acute effects on eggs/fry and experiment on CO2 effects on adult fish. In the developmental study of the model to predict environmental effects around the point of CO2 discharge, carried out were the improvement of the model for prediction of effects on marine organisms, study of the CO2 diffusion in topographic features supposed to be Hawaii, etc. In the international joint study, measurement/observation technology, facilities, etc. were studied in preparation for the experiment actually conducted in the sea. (NEDO)

  9. FY 2000 report on the results of the project on the R and D of the global environmental industry technology. R and D of the technology for predicting environmental effects associated with the CO2 ocean sequestration (Development of the technology for predicting environmental effects in the area around the CO2 discharge point and survey for supporting study); 2000 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo. Nisanka tanso no kaiyo kakuri ni tomonau kankyo eikyo yosoku gijutsu kenkyu kaihatsu (CO2 horyuten shuhen'iki no kankyo eikyo yosoku gijutsu no kaihatsu narabini kenkyu shien chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-03-01

    To obtain the technical outlook for CO2 ocean sequestration by CO2 discharge into the intermediate layer, the R and D was conducted of the technology for predicting environmental effects in the area around the CO2 discharge point, and the FY 2000 results were summed up. In the elucidation study of the behavior at the time of discharging liquid CO2, the melting process of CO2 droplets discharged/dispersed into the seawater of the intermediate layer was observed, and the specific phenomenon of hydrate formation in the process of CO2 droplet formation was grasped. As to the technology for sending CO2 into the ocean and diluting it, experimental study was made of CO2 transportation technology from on the sea to the intermediate layer, technology for rapid dilution immediately after discharge, etc. About the indoor experiment on the CO2 influence on marine organisms, experiment on the CO2 influence was carried out using shells, sea urchin, red sea bream, etc. In the developmental study of models for predicting environmental effects in the area around the CO2 discharge point, the 3D two-phase flow LES model was developed as a model for predicting the CO2 behavior, and the simulation of the liquid CO2 discharge was made at the planned experimental site. The model for evaluation of the biological influence was also made which can consider the interaction between two kinds of organisms. (NEDO)

  10. Fiscal 1998 R and D project on global environmental industrial technology. Research result report on DNA analysis and information processing technology for photosynthesis microorganisms (Development of CO{sub 2} fixation and effective use technology by using bacteria and algae); 1998 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo. Kogosei biseibutsu nado DNA kaiseki joho shori gijutsu no kenkyu (saikin sorui nado riyo nisanka tanso koteika yuko riyo gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report summarizes the fiscal 1998 research result on DNA analysis and information processing technology for photosynthesis microorganisms. On the study on DNA analysis technology by triple-strand formation method, as the comparison study result of a READ method, stable triple- strand formation method and hairpin method, a READ method showed the highest triple-strand formation efficiency for target DNA. On the study on accurate separation technology of specific genes, establishment of protocols was promoted for solid-phase probe technology, subtract technology and leveling technology. On the study on DNA microarray analysis technology by high-efficiency hybridization method, the analysis technology of genes by hybridization method using DNA chips is under investigation. In addition, the high- efficiency analysis technology of specific DNA segments by using an affinity sensor, and the high-accuracy cloning technology for DNA with altered primary structure were also studied. (NEDO)

  11. Prediction on global warming-up. Chikyu ondanka wo yosokusuru

    Energy Technology Data Exchange (ETDEWEB)

    Noda, A [Meteorological Research Institute, Tsukuba (Japan)

    1993-05-01

    This paper introduces models to predict global warming-up caused by greenhouse effect of the earth and increase in greenhouse effect gases, and the prediction results. As a result of CO2 doubling experiments using three-dimensional climate models in predicting the global warming-up, a model that predicted a sharp rise in annual average ground temperatures on the entire earth showed a larger increase in precipitation. According to the result of the CO2 doubling experiments using atmosphere-ocean coupling models, it was learned that the temperature rises higher in high latitude regions rather than rising uniformly over the earth on the whole. The fact that the temperature rise when CO2 has been doubled in a CO2 gradually increasing experiment is smaller than in the doubling experiment can be understood as a delaying effect of oceans generated from their thermal inertia. The former experiment showed a remarkable non-symmetry between the Southern and Northern hemispheres, reflecting the effect of the great oceanic circulation. Increase in cloud amount has an effect of either cooling or warming the earth, but the cooling effect surpasses the warming effect reportedly. Sulfuric acid aerosol in the troposphere is thought to influence the process of solar radiation transmitting through the atmosphere and have an effect to cool down the ground surface. 12 refs., 6 figs.

  12. Optical sensors for earth observation. Chikyu kansokuyo kogaku sensor

    Energy Technology Data Exchange (ETDEWEB)

    Ono, A [National Research Laboratory of Metrology, Tsukuba (Japan)

    1991-10-10

    Developments are made on an optical imager (ASTER) used to collect mainly images of land areas and an infrared sounder (IMG) to measure vertical air temperature distribution and vertical concentration distribution of specific gases, as satellite mounted sensors for earth observation. All the sensor characteristics of the ASTER comprising a visible near infrared radiometer, short wave infrared radiometer and thermal infrared radiometer are required to be capable of providing measurement, evaluation and assurance at the required accuracies during the entire life time. A problem to be solved is how to combine the on-ground calibration prior to launching, on-satellite calibration, and calibration between the test site and the sensors. The IMG is a Fourier transform spectroscopic infrared sounder, which is demanded of a high wave resolution over extended periods of time as well as a high radiation measuring capability. Also required are the level elevation of analysis algorithms to solve inverse problems from the observed radiation spectra, and the data base with high accuracy. 19 refs., 4 figs., 4 tabs.

  13. Reincarnation platn of globe. Chikyu saisei keikaku ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Matsuyama, T. (Agency of Natural Resources and Energy, Tokyo (Japan))

    1990-11-30

    The period of 200 years since the Industrial Revolution has taken for the occurence of global warming up problem, and it may require to face the problem comprehensively and for long period of 100 years unit to resolve it. This reincarnation plan of globe aims to reincarnate the changed global environment hereafter by using time of about 100 years, and proposes to make the comprehensive and long term actions to suppress and reduce exhaust gases resulting the greenhouse effect by the cooperation of all nations in the world. In the former 50 years, feasible countermeasures such as deepenung of scientific knowkedges, promotion of worldwide energy saving, introduction of clean energy, development of revolutional environmental technology, expansion of CO {sub 2} absorbing sources, and technological development of energy for the next generation will be executed continuously. In the latter 50 years, the gas exhausting amount resulting the green house effect will be reduced and suppressed from these results. Owing to these measures, the reduction of gas resulting the greenhouse effect which exceeds the expectation, can clean the globe after 100 years because the cleaning results will be incorporated into the natural circulation and the green globe will be reincarnated. 1 fig., 1 tab

  14. Global warming and coral reefs. Chikyu ondanka to sangosho

    Energy Technology Data Exchange (ETDEWEB)

    Kayane, H [Geological Survey of Japan, Tokyo (Japan)

    1991-09-01

    A summary is described with respect to the relation of the global warming with coral reefs on the environmental estimation based on the sea level rise, and the development of counter-technologies utilizing the CO{sub 2} fixing capability of coral reefs. if no measures are taken to reduce discharge of greenhouse effective gases, the air temperature will rise by 1{degree}C by the year 2025, and 3{degree}C by 2100. The thermal expansion of sea water and partial melting of land ice caused from the said temperature rise will cause the annual sea level rising speed to climb to 6 mm in the next century. It is estimated that the sea level will be elevated higher by 25 cm by the year 2025, 65 cm by 2100, and the maximum of 1 m than the present level. The upward growth rate of reef ridges is between 1m and 4m in 1000 years, and the growth of reef rides as the frameworks of coral reefs and lime alga ridges can not catch up the sea level rise of 6 mm/year. This may cause a possibility of sea water erosion or inundation. As a possible contermeasure, an expectation is placed on structuring coral reef eco-factories which may be possible as a result of elucidating the CO{sub 2} fixing mechanism in coral reefs and utilizing the capability to its maximum. 23 refs., 7 figs., 1 tab.

  15. Environment laws and regulations in China; Chugoku no kankyo hoki oyobi kankyo haishutsu kijun

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, K.

    1996-01-10

    The water environmental criteria in China consist of the sea water criteria, surface water criteria, fishery water criteria, agricultural water criteria, and scenery and recreational water criteria. This paper describes the problems thereof and the future assignments. The `sea water criteria` among other classifications of the water environmental criteria are under discussions for amendment that plan to increase the kinds of water from three in the conventional criteria to four kinds. Generation of harmful chemical substances has kept on decreasing since the 1980`s. However, as can be seen in part of the river water monitoring data, concentrations of pollutants show a trend of increase since 1994. This is caused by waste waters discharged from small-size chemical factories and hide tanning factories. Adequate regulations are applied to these `local enterprises`. Organic compound substances regulated under the waste water criteria are only seven kinds. As the kinds and amount of harmful chemical substances are anticipated to increase in the future, regulations that can deal with the new situation are required. Improvements are sought in the system of `discharge and contamination fee` imposed on industrial waste waters. Preparing the criteria for a total quantity regulation is an important assignment to be discussed as the forthcoming problem. 5 refs., 4 tabs.

  16. Arkitektur

    DEFF Research Database (Denmark)

    Kural, René

    2006-01-01

    Hanamadori Bunka Center , "Kulturcentret for blomster og grønt". Designet af Toyo Ito i samarbejde med bla. Kuwahara, Kanebako, Kankyo Engineering og Atelier Bow-Wow.......Hanamadori Bunka Center , "Kulturcentret for blomster og grønt". Designet af Toyo Ito i samarbejde med bla. Kuwahara, Kanebako, Kankyo Engineering og Atelier Bow-Wow....

  17. Measurement of sea ice thickness using electromagnetic sounding; Denji tansaho wo mochiita kaihyoatsu no keisoku

    Energy Technology Data Exchange (ETDEWEB)

    Kawauchi, K; Suzuki, I; Goto, N [Muroran Institute of Technology, Hokkaido (Japan); Hoshiyama, K

    1997-10-22

    Thickness of sea ice is measured by an electromagnetic method making use of the peculiarities of sea ice. Sea ice floats on the seawater (saline water), and the result is two horizontal layers greatly different from each other in conductivity, with seawater being highly conductive and ice being non-conductive. A study is conducted on Lake Kumatori, a saline lake in Abashiri City, in which effort a board of naturally frozen sea ice and a board of sea ice allowed to form on the sea surface at a spot from which ice has been removed are examined. A portable electromagnetic probe EM38 of GEONICS Company is employed to perform measurement in a horizontal dipole mode. To determine the relationship between the obtained conductivity measurements and sea ice thickness, holes are bored in the sea ice boards for the measurement of their thickness for the formulation of an experimental regression equation. Measurements along the traverse line 1 and traverse line 3 are converted into sea ice thickness by use of the experimental regression equation, and the result is that ice thickness is the greatest near the quay growing thinner away from the shore. The study shows that sea ice thickness may be measured accurately by electromagnetic probing. 3 refs., 10 figs.

  18. Measurement of crack in rock using transmitted elastic wave; Toka danseiha ni yoru ganbannai kiretsu keisoku

    Energy Technology Data Exchange (ETDEWEB)

    Tomishima, Y [National Institute for Resources and Environment, Tsukuba (Japan)

    1997-10-22

    With an objective to measure at high accuracy the positions and sizes of cracks existing in rocks, a theoretical study has been carried out on a method which utilizes initial movement characteristics of P-wave. The P-wave which diffracts and propagates at a crack tip has a characteristic that its phase may reverse according to the positional relationship between vibration transmitting and receiving points. This positional relationship is decided by the Poisson ratio of media alone. Therefore, when the P-wave is measured while the vibration transmitting and receiving points are moved sandwiching a crack, the polarity of received waveform is changed from negative to positive at a certain position as a boundary. In order to measure this change at high accuracy, an elastic wave of high frequency is required, but it is not easy to obtain the wave in situ. In contrast, utilizing the initial movement polarity can not only identify the change in the polarity, but also perform measurement at high accuracy. The present study discussed a case where cracks are parallel with a free surface and a case where the cracks have angles with the free surface, whereas it was shown that positions of the upper and lower tips of a crack, and length of the crack can be measured accurately. 4 refs., 5 figs.

  19. Psychoacoustic parameters and its measuring system; Onshitsu hyoka wo hyokasuru tame no parameter to keisoku system

    Energy Technology Data Exchange (ETDEWEB)

    Ohashi, M.; Imaizumi, H.; Ono, T. [Ono Sokki Co. Ltd., Tokyo (Japan)

    1998-05-01

    Human auditory sensation has both extremely excellent performance and general versatility as sound analyzer. At present, it is impossible to make equipment with the same functions as human being, and describe an auditory sensation function as acoustic sensor even by any physical analysis techniques. However, extraction of auditory sensation parameters is becoming possible by using psychoacoustics and binaural signal processing. This paper mainly explains the calculation method of sound quality evaluation parameters derived from psychoacoustic results based on a sound quality evaluation system under development by the authors. This system is based on binaural measurement by dummy head, and calculates psychoacoustic parameters such as loudness, sharpness, roughness, fluctuation strength and tonality through frequency analysis of the measured stereo signals. The system also calculates 2-D parameters such as sensory pleasantness and unbiased annoyance based on the above parameters. 12 refs., 4 figs.

  20. Instrumentation technology to be used for sense alternative. Kankaku daiko wo mezasu keisoku gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Tamiya, E. (Japan Advanced Institute of Science Technology, Hokuriku, Ishikawa (Japan))

    1994-07-05

    Recently, artificial taste sensors or smell sensors that simulate the biological recognition mechanism were developed. This paper describes a smell sensor using natural and artificial fats as the molecule recognizing material and the crystal oscillator or SAW (Surface Acoustic Wave) device as the transducer. The paper also describes the results of the experiments made on the sensor. This sensor consists of 20 LB (Languivir-Blodgett) layers of several types of natural fats on the SAW device. Natural fats on the surface of the crystal oscillator were coated and the response to smelling substances was checked. The result indicates that the response is almost proportional to concentration, and that alcoholic smells can be recognized. To check receiving signal from the sensor system related to absorption and the absorption speed and converting it into higher order information, experiments were conducted to convert data into characters through the neutral network. Though there are still issues of practical use, it was verified that these techniques are effective. 9 refs., 6 figs., 1 tab.

  1. Changing project finance climate; Project finance wo meguru kankyo henka

    Energy Technology Data Exchange (ETDEWEB)

    Madono, S. [The Export-Import Bank of Japan, Tokyo (Japan)

    1998-03-01

    Development of conditions under which project financing (PF) functions is described. PF, a method with which funds are procured for a project on the security of the assets of and the cash flow involving the project, established its position as a popular financial means. Into the 1990, however, PF underwent a complete change, when it came to be actively employed as a means for the procurement of money for what is called `infrastructure building project for invigorating the private sector` in the developing countries. PF has now come to be utilized for the financing of projects in various fields besides the field of resources exploitation. In particular, PF is now utilized in schemes such as BOT (build, operate, transfer) in public enterprises, for instance, electric power utilities in developing countries. The gravest problem found in the private sector invigorating type PF is that the sponsor, operator, exporter, and lender on their respective levels are experiencing rising risks because of intensified competition in the presence of a great number of projects. Such risks involve the exchange rate, the completion of work, and the relations between the borrower and operator. 2 figs.

  2. Environmental health surveillance system; Kankyo hoken surveillance system

    Energy Technology Data Exchange (ETDEWEB)

    Ono, M. [National Inst. for Environmental Studies, Tsukuba (Japan)

    1998-02-01

    The Central Environmental Pollution Prevention Council pointed out the necessity to establish an environmental health surveillance system (hereinafter referred to as System) in its report `on the first type district specified by the Environmental Pollution Caused Health Damages Compensation Act,` issued in 1986. A study team, established in Environment Agency, has been discussing to establish System since 1986. This paper outlines System, and some of the pilot surveillance results. It is not aimed at elucidation of the cause-effect relationships between health and air pollution but at discovery of problems, in which the above relationships in a district population are monitored periodically and continuously from long-term and prospective viewpoints, in order to help take necessary measures in the early stage. System is now collecting the data of the chronic obstructive lung diseases on a nation-wide scale through health examinations of 3-year-old and preschool children and daily air pollution monitoring. 6 refs., 3 figs., 1 tab.

  3. Environment purification using microorganisms. Biseibutsu ni yoru kankyo joka

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, H [Asahi Glass Co. Ltd., Tokyo (Japan); Harada, S

    1993-12-01

    Technologies to purify polluted soils vary with kinds of pollutants, spread of pollution, and shapes of water veins. A method is used often that several wells are drilled in a polluted area, and water is circulated between upstream wells and downstream wells, where activities of microorganisms living in that particular environment are utilized to biodegrade the pollutants. This technology is called bioremediation. This paper deals with soil pollution by chemical substances, and describes development of a technology to remove pollution caused by PCB and petroleum which is thought difficult to apply the bioremediation technology among environment purifying technologies using microorganisms. The bioremediation of petroleum pollution assumes petroleum pollution on seashores. Discussions have been given on separation from sea water of petroleum decomposing microorganisms to be used in the bioremediation, and the number of petroleum decomposing bacteria in seas near Japan. As a result, it was made clear that a few kinds of bacteria will suffice for decomposition of main components in a mixture as complex as petroleum. 5 refs., 4 figs.

  4. How to save the earth from warming. Chikyu ondanka wo sukuu michi

    Energy Technology Data Exchange (ETDEWEB)

    Nitta, Y [Central Research Institute of Electric Power Industry, Tokyo (Japan)

    1994-06-15

    Two articles of 'Methods of saving the earth from warming' and 'We can be friends of the earth' are included in this report. The former gives a plain explanation of some points in these articles in consideration of global warming drawing general concern. The first is to reduce the amount of warming gases. For example, if the houses of Asahikawa Specifications are built in Tokyo, the energy required for air conditioning is reduced down to 1/3 - 1/7 of the one in ordinary houses. The second is to exhaust no warming gases by substituting natural energy sources for fossile fuels. The third is to fix CO2 and, in this respect, vegetable factories combined with bionics may be useful. The latter introduces dreams such as air conditioning utilizing solar energy, self-supporting houses, solar bicycles, and super energy-saving cars applied with various kinds of natural energy for the purpose of being used as energy harmless to the earth. Furthermore, it suggests the concepts of super energy-saving and wasteless equipment and systems in the title of E[sup 3] technology. 2 refs., 7 figs.

  5. Investigational report on the trend of measures for global warming; Chikyu ondanka taisaku doko chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    To know the trend of measures taken for global warming, conducted were overseas surveys, participation in academic society meetings, and literature surveys. The phaseout time of all ozone depleting substances responsible for the ozonospherial destruction was determined for both developed and developing countries in the 7th Meeting of countries which concluded the Montreal Protocol. As information on measures for protecting the ozonosphere, introduced was activities under United Nations Environment Programme (UNEP). New fluorine containing ethers were introduced as cleaning solvent which causes no ozonospherial destruction and is low in global warming index. Toxicity data were obtained on HFC-236ea and HFC-236fa which are promising substitutes in HCFC foaming and refrigerant fields. The paper introduced an outline of the 1st Meeting of countries which concluded the Framework Convention on Climate Change held in 1995. According to the report on the National Institute of Public Health and Environmental Protection of the Netherlands, the amount of emission of fluorine containing greenhouse effect gas (in CO2 conversion) reached 8-14% of all the amount of greenhouse effect gas emitted in 1990 unless the control is reinforced. An outline of the TEWI-3 project was introduced which is useful for comparing effects of substitution technologies on global warming. 14 refs., 11 figs., 29 tabs.

  6. Kyoto protocol and related issues; Chikyu ondanka boshi Kyoto kaigi (COP3) to sono kadai

    Energy Technology Data Exchange (ETDEWEB)

    Ninomiya, Y. [Global Industrial Social Progress Research Institute, Tokyo (Japan)

    1997-09-30

    The Third Session of the Conference of the Parties to the United Nations Framework Convention on Climate Change (COP3) will be held in Kyoto in December 1997. Described herein are the current status and issues of the convention. USA and Japan, which hold important keys to set up the abatement target, have issued no proposals concretely at the current AGBM (Ad-hoc Group Berlin Mandate) 7, and the conference for the concrete targets will be decided in the next AGBM 8 to be held in October. The final target will be set by the ministerial segment of COP3, because the negotiations for the treaty are political in nature. USA proposes reduction at a uniform, realistic rate, and Japan proposes reduction at a uniform rate or setting up the emission target per capita, each being different from reduction at a much higher uniform rate proposed by EU. Within EU, however, 10% out of 15% reduction rate it proposes is agreed by the member countries, and the remaining rate of % may not be agreed. It is necessary for the advanced parties to set up realistic and legally binding solutions, including ratification by USA, which can persuade the developing countries. tab.1

  7. Significance of United Nations Conference on Environment and Development (UNCED). Chikyu summit no igi

    Energy Technology Data Exchange (ETDEWEB)

    Shimizu, T [Ministry of Construction, Tokyo (Japan)

    1992-10-01

    On the significance of UNCED, the background, the results of the conference and the reflection to the construction administration were described. The causes of global environmental problems such as the global warming, the ozone layer destruction and the decrease of forests can mainly be classified into 3. These are the problem of socio-economic activities of advanced countries such as mass production, mass consumption and mass dumping, the problem originating from the poverty in developing countries and the problem originating from the interests between advanced countries and developing countries. The main results in the UNCED were as follows: the signature to the two conventions as to the climate change and the biological diversity, the statement as to the principle for forests, the Rio Declaration which should be said to be the world constitution concerning the environment and development, and the adoption of the Agenda 21 of the draft which summarized the policies and measures. The Agenda 21 includes the fund, the technology transfer and the organization problems. In order to reflect these problems to the construction administration, it is necessary to promote the energy policy, the establishment of efficient traffic system, the effective land utilization, the appropriate management of river spaces, the urban policy and the recycling of resources.

  8. Investigations on forests from viewpoints of global environment; Shinrin no chikyu kankyoteki shiten kara no chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Forests have become drawing attention as an absorption source of carbon dioxide, a greenhouse effect gas. This paper discusses significance of forests from viewpoints of their roles as diverse ecological systems and socio-economic values. Forest is a place for living and resting of all kinds of living organisms including plants, animals and microorganisms. Living forms in forests being affluent in kinds and large in amount bring great favor to human societies. Forests play diversified roles other than biological roles in addition to largely affecting heat distribution on the ground through evapotranspiration. These roles include suppression of erosion on ground surface, alleviation of micro climate by reducing wind velocity on the ground, and disaster prevention. Forests have an aspect of supply source of production resources for societies as well as an aspect of unused lands. Efficiency of converting solar energy by plants looks inferior to that of solar cells. Biomass may be regarded as regenerative energy limited to a case where excess production is utilized. 142 refs., 56 figs., 44 tabs.

  9. Photodegradable plastics useful for global environment conservation. Chikyu ni yasashii hikaribunkaisei plastic

    Energy Technology Data Exchange (ETDEWEB)

    Iwasa, T. (Harima Kasei K.K., Osaka (Japan))

    1991-10-11

    Photodegradable plastics and their additives were explained.Two methods are used to manufacture photodegradable plastics.The first method is made by using a copolymer and a monomer containing a functional group and the second method is made by adding a photodegradable agent to an undecomposable plastics.The copolymer based on ethylene and carbon monoxide is included in the first type. The copolymer based on the vinyl ketone to which the carboxyl group is introduced, and ethylene or styrene is also included in this type. A metal dithiocarbamate is included in the second additive type, for which several methods to improve weak points of the pigment compounding system have been proposed later. Benzophenone derivatives, transition metal salts of organic acids and anatase type titanium dioxide are also included in the second type. Any additives are usually supplied as the masterbatch. The performance evaluation and degrading mechanism of ferric tri(2-(methylbenzoyl)benzoate) of adittion type additives were explained. 8 refs., 3 figs., 1 tab.

  10. Environmental impact assessment caused by global warming. Chikyu ondanka no eikyoryo hyoka to sono taisaku

    Energy Technology Data Exchange (ETDEWEB)

    Oshima, K [Geological Survey of Japan, Tokyo (Japan)

    1991-09-01

    This paper describes the considerations on the influence of the global warming on the environment, and the discussions on the measures against the climatic changes. With respect to the environmental effects by the global warming, the considerations were given based on the studies on the effects of mainly the Quaternary climatic changes on the surface sea water temperatures, sea level and animal flocks. If the magnitude of the climatic changes anticipated to occur during the 21st century is lower than that have taken place in the past 10,000 years during which the agricultural production has developed to a full-scale, there would be no fear of drastically changing the ecology on earth. If the estimation of future climatic and environmental changes becomes possible, then four basic positions could be selected for establishing the contermeasure plans. That is, the first is the measures to correspond to birth-rebirth transmigration; the second is the measures to carbon dioxide disposition upon concluding that the cause for the global warming is the atmospheric increase of carbon dioxide concentration, measures for conservation and international cooperation; the third is to deal with the warming environments; and the fourth is the means to reconstruct the earth. While a number of countermeasures may be prepared, Which of them should be selected will be decided by the amount of effects. 15 refs., 6 figs., 1 tab.

  11. Global warming and sea level rise. Chikyu Ondanka to kaimen josho

    Energy Technology Data Exchange (ETDEWEB)

    Mimura, N [Ibaraki University, Ibaraki (Japan). Faculty of Engineering

    1993-10-15

    This paper describes the following matters on the problems of global warming and sea level rise. The first evaluation report published by the inter-government panel on climate change (IPCC) in 1990 estimates that, if emission of greenhouse effect gas keeps increasing at the present rate, the air temperature and the average sea level would rise by 3[degree]C and 65 centimeters, respectively by 2100. Global warming would not only result in rise of the sea level, but also accompany changes in strengths and routes of tropical low pressure areas, and precipitation patterns. Downstream areas of large rivers and island countries on coral reefs may have a risk of getting submerged. Countries having coasts developed to high densities (Japan, for example) would be subjected to a high potential effect. An 'East Hemisphere International Conference on Sea Level Rising Problem' was held in Japan in August 1993 as part of the works to prepare the second evaluation report of the IPCC (publication scheduled for 1995). The conference was attended by 24 countries, and 43 study results were reported. 4 figs.

  12. FY 1998 achievement report on the photon measuring/processing technology (R and D of the photon measuring/processing technology); 1998 nendo foton keisoku kako gijutsu seika hokokusho. Foton keisoku kako gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    In this project, the survey/arrangement were made of the trend of the recent technology such as photon (laser) measuring/processing/generation and a possibility of adopting the photon technology to the field except measuring/processing, to clarify technical subjects for establishing/commercializing the photon technology. Also for the purpose of reducing the energy cost by improving the performance of laser processing device, prolonging the life and reducing the operational cost, the development of the following were carried out: (1) high efficiency laser processing device. (2) high conversion efficiency laser diode. In (1), a laser generating device with Yb:YAG crystal as oscillating medium was trially manufactured, and the power of 35W and optical-optical conversion efficiency of 7.1% were obtained. A comparison was also made between Yb:YAG laser and Nd:YAG laser, and made it clear that as the industrial use high power laser, Nd:YAG laser has the advantage over the other. In (2), the development was made of technology for simultaneous uniform growth of more than one LD crystal wafers with high conversion efficiency and technology for evaluation. Namely, the high uniformity crystal wafer with variations among wafers of {+-}4% was obtained using the introduced high efficiency crystal growth device and high efficiency thin film evaluation device. (NEDO)

  13. Strain measurement of wheel by a super-small size strain history recorder and its application to fatigue design; Chokogata jitsudo hizumi keisoku sochi ni yoru wheel no hizumi keisoku to hiro kyodo sekkei eno oyo

    Energy Technology Data Exchange (ETDEWEB)

    Murakami, Y [Kyushu University, Fukuoka (Japan); Mineki, K; Wakamatsu, K [Central Motor Wheel, Tokyo (Japan); Morita, T

    1997-10-01

    A very small strain history recorder based on the rainflow method has been developed and applied to strain measurement of car wheels under several road tests. Various strain amplitude histogram data under mountain road, city road and high-way were acquired by the recorder for various types of wheels. The data were studied from the viewpoint of random fatigue and the fatigue damages were evaluated by Miner`s rule. The results of the damage evaluation were used for the improvement of shapes of wheels. 2 refs., 6 figs., 1 tab.

  14. Automation of measurement of heights waves around a model ship; Mokeisen mawari no hako keisoku no jidoka

    Energy Technology Data Exchange (ETDEWEB)

    Ikehata, M; Kato, M; Yanagida, F [Yokohama National University, Yokohama (Japan). Faculty of Engineering

    1997-10-01

    Trial fabrication and tests were performed on an instrument to automate measurement of heights of waves around a model ship. The currently used electric wave height measuring instrument takes long time for measurement, hence poor in efficiency. The method for processing optical images also has a problem in accuracy. Therefore, a computer controlled system was structured by using AC servo motors in driving the X and Y axes of a traverse equipment. Equipment was fabricated to automate the wave height measurement, in which four servo type wave height meters are installed on a moving rack in the lateral (Y-axial) direction so that wave heights to be measured by four meters can be measured automatically all at once. Wave heights can be measured continuously by moving the moving rack at a constant speed, verifying that wave shapes in longitudinal cross sections can be acquired by only one towing. Time required in the measurements using the instrument was 40 hours as a net time for fixed point measurement and 12 hours for continuous measurement, or 52 hours in total. On the other hand, the time may reach 240 hours for fixed point measurement when the conventional all-point manual traverse equipment is used. Enormous effects were obtained from automating the instrument. Collection of wave height data will continue also on tankers and other types of ships. 2 refs., 8 figs., 1 tab.

  15. Turbulent measurements in the lobe mixer of a turbofan engine. Turbofan engine lobe mixer nagare no ranryu keisoku

    Energy Technology Data Exchange (ETDEWEB)

    Yamamoto, Makoto; Ogawa, Yuji; Arakawa, Chuichi; Tagori, Tetsuo [Ishikawajima-Harima Heavy Industries, Co., Ltd., Tokyo, (Japan) Nippon Steel Corp., Tokyo, (Japan) The Univ. of Tokyo, Tokyo, (Japan). Faculty of Engineering The Univ. of Tsukuba, Tsukuba, (Japan)

    1990-01-25

    In order to examine the flow generated by the lobe mixer of a turbofan engine precisely, after measuring a three dimensional turbulent flow by a hot-wire anemometer, the mixing process of a bypass flow and a core flow with cross-sectional vortexes, and factors generating the vortex were clarified experimentally using the scale model of an exhaust duct with the lobe mixer. As a result, the mixing process was strongly affected by a lobe tip figure and a lobe figure near a center-body, and affected by the minimum gap between the lobe and center-body. The subsequent mixing process was scarcely affected by the ratio of a core flow velocity to a bypass flow one, although strongly affected by flow conditions on a lobe surface. Since the lobe mixer promoted the mixing around a center axis shifting a fast core flow outwards, it was unfavorable to mixing, however, it was expected to be useful for reducing engine jet noise. 3 refs., 7 figs.

  16. Development of measuring system for automobile unit assembly equipment; Jidosha buhin seisan setsubi no keisoku system kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Miura, M; Uchishiba, I; Fukunishi, T; Umemura, H [Toyota Motor Corp., Tokyo (Japan)

    1997-10-01

    This measuring system has two characteristics. The first characteristic is to shorten lead time from system design to production. The second characteristic is to accomplish system construction simply without computer technical knowledge. This measuring system consists of hardware module which are standardized according to functions and software packages which are composed of various functions. This system is put together according to purpose. When it was introduced into production line, it could shorten lead time of 1/3. 10 figs., 1 tab.

  17. Temperature measurement of geothermal wells by optical fiber sensor; Hikari fiber sensor wo mochiita chinetsusei no ondo bunpu keisoku

    Energy Technology Data Exchange (ETDEWEB)

    Matsushima, N; Sakaguchi, K [Geological Survey of Japan, Tsukuba (Japan)

    1996-10-01

    Experiments of temperature measurement were conducted in high temperature and high pressure geothermal wells using optical fiber sensor. A temperature measurement system using optical fiber sensor was applied to geothermal wells. Working availability was confirmed under the condition up to the depth of 1,750 m and the temperature of 240 centigrade. Observed values agreed well with those observed by the conventional temperature logging. Durability of the optical fiber sensor was also sufficient. The maximum standard deviations of measured values were 1.3 centigrade at the depth of 1,750 m at 195 centigrade for the loop-type sensor, and 3.7 centigrade at the depth of 365 m at about 200 centigrade for the single-end sensor. Although the accuracy was inferior to the conventional measurement using a thermo couple, it was enough to be applied to usual temperature logging. Furthermore, for this system, the temperature profile in the whole well can be monitored, simultaneously. Through the experiments, the detailed successive change of temperature profile accompanied with the water injection can be clearly illustrated. 3 refs., 7 figs.

  18. High-accuracy measurement of ship velocities by DGPS; DGPS ni yoru sensoku keisoku no koseidoka ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Yamaguchi, S; Koterayama, W [Kyushu Univ., Fukuoka (Japan). Research Inst. for Applied Mechanics

    1996-04-10

    The differential global positioning system (DGPS) can eliminate most of errors in ship velocity measurement by GPS positioning alone. Through two rounds of marine observations by towing an observation robot in summer 1995, the authors attempted high-accuracy measurement of ship velocities by DGPS, and also carried out both positioning by GPS alone and measurement using the bottom track of ADCP (acoustic Doppler current profiler). In this paper, the results obtained by these measurement methods were examined through comparison among them, and the accuracy of the measured ship velocities was considered. In DGPS measurement, both translocation method and interference positioning method were used. ADCP mounted on the observation robot allowed measurement of the velocity of current meter itself by its bottom track in shallow sea areas less than 350m. As the result of these marine observations, it was confirmed that the accuracy equivalent to that of direct measurement by bottom track is possible to be obtained by DGPS. 3 refs., 5 figs., 1 tab.

  19. In situ measurement system of electric resistivity for outcrop investigation; Roto de shiyodekiru denkihi teiko keisoku system

    Energy Technology Data Exchange (ETDEWEB)

    Nakagawa, K; Tamura, T [Osaka City Univ., Osaka (Japan). Faculty of Science; Morikawa, T [Osaka Prefectural Government, Osaka (Japan)

    1997-05-27

    A simplified electrical resistivity measuring device has been developed as a trial for field and laboratory uses, and some measurements were conducted. For this device, four probe electrodes are penetrated in the clay specimen, to calculate the resistivity from the voltage between both ends of the reference resistance connected with current electrodes in a series and the voltage between intermediate two voltage electrodes. It can be used in the field measurements. For the measurements, specimens of marine and lacustrine clayey sediments with clear stratigraphic levels in southern Osaka Group were used. In the laboratory, in addition to basic physical tests, diatom analysis and measurements of conductivity of clay suspension were also conducted. As a result of the experiments, the electric resistivity of marine clay obtained at the outcrop was lower than lacustrine clay as expected. The value of the former was a half of that of the latter. The frequency dependence in the high frequency region above 1 MHz was the reverse. The difference in electrical resistivity values between non-agitated specimens was about four times. The electrical resistivity of clay suspensions varied in two orders. 3 refs., 9 figs.

  20. Viewpoint of policy science is required for measures against the global warming. Chikyu ondanka taisaku ni motomerareru seisaku kagakuteki shiza

    Energy Technology Data Exchange (ETDEWEB)

    Nishioka, Shuzo [National Inst. for Environmental Studies, Tokyo, (Japan)

    1990-01-25

    It is a matter of course that the issue of the global warming requires management of policy science, but the ultimate target of various propositions is not just the holding back of the global warming which causes the collapse of living; it is necessary to check the propositions from the viewpoints of evasion of international strifes, security of fairness among generations, measures against uncertainty, and measures delayed from the actual phenomena. For Japan it is necessary to declare its responsibility to the environment, and make it clear that Japan pays sufficient costs and efforts. In order to exhibit its leadership, Japan must clarify its stance and then contribute to the world making the most of its unparalleled ability consolidated in the systematic and technical background of public pollution and in the cultural conception. Targeted policies will be the support of developing countries in their independent environmental management, exhibition of leadership in the environmental field and acceleration of international agreements. 4 refs., 1 fig.

  1. The First D/V Chikyu IODP Operations: Successful Logging and Coring During NanTroSEIZE Stage 1 Expeditions

    Directory of Open Access Journals (Sweden)

    Moe Kyaw Thu

    2008-07-01

    Full Text Available The Nankai Trough Seismogenic Zone Experiment (NanTroSEIZE is a multi-expedition IODP drilling project aimed at drilling, coring, logging, and instrumenting the seismogenic zone of an active subduction margin , in a region thought to generate megathrust earthquakes of magnitude >8.0 on the moment-magnitude scale (Tobin and Kinoshita, 2006. The Nankai Trough, offshore of the Kii Peninsula, Honshu, Japan (Fig. 1 was chosen as the location for thisproject based on a number of scientific drilling proposals to IODP. These reviewed existing drilling data in the region, the long-term historical and recent record of great earthquakes, the social and societal relevance of the area, and the accessibility of the seismogenic zone to present drilling technology. The first stage of this multi-stage project was intended to accomplish a broad characterization of the shallow geology, geophysics, physical properties, heat flow, and fluid flow in a transect across the downgoing Philippine Sea Plate, the toe of the Nankai accretionary prism, the megasplay fault zone region on the continental slope, and the Kumano Basin that lies between the accretionary prism and the KiiPeninsula, on the continental shelf (Fig. 2.

  2. Global sea level change and the response of solid earth; Kaisuijun hendo ni taisuru kotai chikyu no yakuwari

    Energy Technology Data Exchange (ETDEWEB)

    Murakami, Y. [Geological Survey of Japan, Tsukuba (Japan)

    1997-05-27

    A review was given on the theory that sea level change having occurred in the past 20,000 years has given a great impact on patterns of upheaval and subsidence of the islands of Japan. Nakada has summarized distribution of underwater remains in the western part of Kyushu and estimated values of sea surface altitude in 6000 years ago, and used this conceptional chart to propose a crust upheaval mechanism by using hydroisostasy. More specifically, this is a model that crust which has subsided due to rise in the sea level has created flows of mantle, causing upheaval of the crust in land areas. This viewpoint requires further accumulation of data and verification of the theory in areas other than the western part of Kyushu. It is important to consider the effect of sea level change also in studying processes of subsidence and sedimentation in sedimentary basins including Osaka Bay. The currently available theories use analysis solutions on stratified ground, but does not consider topographical profiles from land areas to sea areas. As this topographical effect is thought extremely important, it is necessary to develop a two-dimensional cross section analyzing method by using the finite element method. 6 refs., 3 figs.

  3. Research cooperation in the development of laser radar for environmental measurements. Environmental network; Kankyo keisokuyo laser radar no kaihatsu ni kansuru kenkyu kyoryoku. Kankyo network

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Among the research cooperation in the development of laser radar for environmental measurements with Indonesia between FY 1993 and FY 1996, results of the research and development of the environmental network are summarized. For the environmental information network, the Tokyo NOC is linked as an Internet connection point in Japan with the Jakarta NOC using an international dedicated line with a capacity of 64 Kbps. The Tokyo NOC is linked with domestic environmental information researchers using Internet. Thus, data stored in the data processing system of laser radar can be exchanged, information in both countries can be exchanged using E-mail, and data can be accumulated. For the research cooperation with Indonesia, research of path control and information relay server, research of effective transmission of data on the network, and research of multimedia communication have been conducted. The multimedia communication, distributed processing, and extension of dedicated line network using PPTP have been also conducted. 39 figs., 4 tabs.

  4. Research and development cooperation project on environmental measurement using laser radar (environmental network) in fiscal 1993; Kankyo keisokuyo laser radar no kaihatsu ni kansuru kenkyu kyoryoku (kankyo network)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    For the purpose of contributing to the research cooperation project on the development of a laser radar for environmental measurement, the paper surveyed the present and future trend of the environment related information network in Indonesia. The survey was conducted in terms of a name of the network, the main administration body, the number of users, the utilization status, the use protocol, details of service, domestic mode installation sites and the main administration body, accounting system, types of the network used, reliability and stability of network, limitations on the use and details of the limitation, etc. The plan for expanding telecommunication equipment is being advanced in a very quick tempo. However, there are many problems in digitalization, and it is feared that the plan will be delayed. As to telecommunication quality and connection quality, the telecommunication completion rate, SCR, is very low, approximately 24% on average, which is equal to that around 1990 in Japan. The business service for users is all bureaucratic since they have a lot of applications for the installation piling up with no exception to the rule of developing countries. 23 figs., 10 tabs.

  5. Research and development cooperation project on environmental measurement using laser radar in fiscal 1995 (environmental network); Kankyo keisokuyo laser radar no kaihatsu ni kansuru kenkyu kyoryoku (kankyo network)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    As a part of the cooperative work with Indonesia of R and D of a laser radar for environmental measurement, the paper described the development of an environmental network. The field survey was conducted in April, July and December 1995 and in March 1996. For the investigational research, five meetings of the committee and four times of group work were held. The Asian environmental network was studied in terms of its arrangement, operation and management, and the overall network/path control design were being prepared. To make the persons concerned abroad and in Japan understood the APEC Osaka Conference held in November 1995, a homepage APEC `95 Kansai was opened using WWW (World Wide Web, a decentralized hyper media system which can dispatch information to the whole world by network using hyper text). Moreover, in connection with this, a homepage was opened of CICC (Center of the International Cooperation for Computerization, a center controlling the whole Asian environmental information network system where E-mail and data are exchangeable with Indonesia via Tokyo NOC (Network Operation Center)). 49 figs., 8 tabs.

  6. Environment of developing countries. ; Centered around 1992 white paper or environment. Kaihatsu tojokoku no kankyo. ; 1992 nenban kankyo hakusho wo chushin ni shite

    Energy Technology Data Exchange (ETDEWEB)

    Takiguchi, N [Environment Agency, Tokyo (Japan)

    1992-12-01

    The present paper outlines the present situation of environment of developing countries, factors causing environmental devastation, and the influence in the international linkage as described in 1992 White Paper on Environment. The present environmental devastation is originated from national poverty. In general, as the results of imposing excessive pressure on the natural environment accompanying the increase of population or causing urban pollution due to the movement or densification of population, poverty brings about the reduction and devastation of forest, deterioration of soil, desertification, contamination of air and rivers, causing miserable situation. Prawn culture as primary export industry damages mangrove woods, and causes water pollution. Industrial development is rapidly spreading pollution of water and air. As for international relations, the net transfer amount of money in the flow of funds between advanced countries and developing countries is in the direction from the latter to the former due to payment of debts. In enforcing direct investment or overseas development aid projects, advanced countries must be aware of their responsibility, make efforts in grasping the situations of aided countries and perform sufficient environmental assessment. 5 refs., 8 figs., 11 tabs.

  7. Research and development cooperation project on environmental measurement using laser radar in fiscal 1994 (environmental network); Kankyo keisokuyo laser radar no kaihatsu ni kansuru kenkyu kyoryoku (kankyo network)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    Under the R and D of a laser radar for environmental measurement which are conducted in cooperation with Indonesia, the paper reported the R and D of the environmental network in fiscal 1994. Four field surveys were made, and the following were conducted: proposal of a technical system, adjustment of the Asian environmental information network with BPPT and LIPI which are organs on the Indonesian side, installation of/technical discussion on network equipment, etc. There is IPTEKNET as a plan of a nationwide network of the scientific technology information service in Indonesia. The analytical design phase of this system converged in 1992, and the predicted investment amount in the coming five years is expected to be 6.7 million US dollars. As the future Asian environmental information network work, planned are connection between BPPT and Tokyo CC and connection at BPPT between the Asian environmental information network and IPTEKNET. Network managers at sites are very skillful, and therefore, the thorough cooperative work is anticipated. 24 figs.

  8. Air environment purification using photocatalyst. Hikari shokubai ni yoru taiki kankyo joka

    Energy Technology Data Exchange (ETDEWEB)

    Takeuchi, K [National Institute for Resources and Environment, Tsukuba (Japan)

    1993-12-02

    Noticing that metal oxides have photocatalysis for reduction in NOx concentration and examining effects of the TiO2 selected on removal of pollutant, the paper proposes a direct purification method for the air environment. Since TiO2 causes electron excitation meeting near ultraviolet irradiation, it manifests a catalytic function for various oxidation/reduction reactions. Details of the reaction mechanism are unknown, various active oxygen species generated on the surface of TiO2 under light irradiation oxidize NOx and acquire it as nitric acid on the surface. It is found that mixture of activated carbon of low hygroscopicity with TiO2 is effective to prevent a tendency of NO to desorb before NO becomes nitric acid. What 40% of the catalyst with fluorine resin is formed into like a sheet shows a high removal rate even in the amount of ultraviolet irradiation in a winter cloudy day in the wide range of 0.5 - 95.0% of NOx and SO2, and if the photocatalyst is applied to the side wall of city buildings, the NOx concentration is estimated to be reduced by as much as 20%. 5 refs., 3 figs.

  9. Micrometeorological function of paddy fields that control temperature conditions; Suiden no ondo kankyo kanwa kino

    Energy Technology Data Exchange (ETDEWEB)

    Oue, H; Fukushima, T [Ehime University, Ehime (Japan). Faculty of Agriculture; Maruyama, T [Kyoto University, Kyoto (Japan). Faculty of Agriculture

    1994-10-01

    A verification was conducted on the micrometeorological function of paddy fields that control temperature conditions. A movement measurement was executed in order to elucidate air temperature distribution in the paddy field area. The observation revealed the following matters: air temperatures over paddy fields and farm lands are lower than those at bare lands and paved areas; air temperatures downwind the paddy fields are lower than those in residential areas; and air temperatures on the paddy fields are lower than those on the farm lands. Measurement of the air temperature distribution in paddy fields revealed that a paddy field becomes a heat absorbing source in the process of breeze blowing over the paddy field, and alleviates the temperature environment in the downwind area. A discussion was given on the specificity of surface temperature of the paddy field from the above result. It is the feature of paddy fields in summer that the energy exceeding the radiated amount is distributed into latent heat around the noon of a day. The surface temperatures are in the decreasing order of non-irrigated bare land > irrigated bare land > atmometer water surface > farm land > paddy field. The upper limit for the paddy field surface was around 28{degree}C. Surface temperature forming factors were discussed, and the surface temperature parameters (relative humidity, evaporation efficiency, etc.) were derived on each type of the land surface. The surface temperatures on each land surface were calculated using the parameter values. The result revealed that a paddy field having high relative humidity and evaporation efficiency has an effect to suppress the surface temperatures. 6 refs., 10 figs., 1 tab.

  10. Comprehensive research cooperation in environmental technology in fiscal 1995; 1995 nendo kankyo gijutsu sogo kenkyu kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Cooperative study was conducted on research subjects concerning water pollution preventive technologies in China and Thailand. In China, straw pulp mills were studied which were in the Institute of Light Industry Environmental Protection and the Environmental Engineering Course of Jinghua University. The following studies were jointly conducted: survey of the water quality pollution caused by waste water, investigational study on production technology and waste water treatment technology, extraction of technologies effective to preserve water quality, study/evaluation of economical efficiency of the said technologies, etc. In Thailand, cooperative research was conducted on automatic measuring technology for factory waste water in a model industrial estate of the Thai National Industrial Estate Corporation. Items for the study were a study on measuring technology for water quality environment, an investigation on the status of water quality environment in the model industrial estate, a study on automatic measuring technology for plant waste water, a study on how to use measuring data in the model industrial estate, etc. Every study enabled technical data accumulation at every research institute through field research exchanges. 24 refs., 91 figs., 45 tabs.

  11. Evaluation of environmental impact by LCA method. LCA shuho ni yoru kankyo fuka hyoka

    Energy Technology Data Exchange (ETDEWEB)

    Sakamura, H.; Utsuno, F.; Yasui, I. (The University of Tokyo, Tokyo (Japan). Institute of Industrial Science)

    1994-06-01

    This paper explains the concept, history, and analytic methods of life cycle assessment (LCA), showing its application to beer bottles and cement factories as specific examples. The LCA is a method to calculate substances and energies put into the whole process of production of a product from raw material mining to product wasting and environmental loads emitted therefrom. It also evaluates the result collectively and quantitatively. A first case of the research is reportedly the one performed at Coca-Cola Co., Ltd. in 1969. Full-scale researches have gone forward in European countries in the recent several years, and are progressing to international networks. The analytic methods can be divided largely into an accumulation method to analyze data in each process and add them up, and a method to use an industrial association table. The former method is the most generally used method currently in overseas countries if referred to the LCA. Because the LCA can cause the analytic result and evaluation to vary depending on the purpose, it is important to define the goal, and set the scope. The LCA must develop in the future although it has a number of problems. 10 refs., 5 figs., 2 tabs.

  12. Energy, environment and pursuit of happiness; Energy kankyo mondai ningen no kofuku kara kangaeru

    Energy Technology Data Exchange (ETDEWEB)

    Shingu, H. [Kyoto University, Kyoto (Japan)

    1997-05-05

    The energy and environment issue was considered from a viewpoint of human happiness. The paper picks up economy, philosophy, energy and humans as organisms, and considered how the principle of the increase by geometrical progression plays an important role in these. That the repetition in phenomena is like the increase by geometrical progression means that changes increase not linearly but exponentially and nonlinearly and bring such large changes as are unimaginable. The increase in entropy, which is caused by a nonlinear increase of the state, is an irreparable change. The problem of the pursuit of happiness also cannot be solved by the linear thought. The energy and environment problem cannot reach the solution in an extension of the linear thought in which humans have overcome poverty and lacks since the past and pursued richness earnestly. Namely, it is necessary for the 21st century to stop thinking of the energy utilization for seeking for much more richness and to try to think the energy issue in the social system where happiness with not too much richness is presupposed. 16 refs., 1 fig., 1 tab.

  13. Report of 'Survey on Asian environmental information networks'; 'Asia kankyo joho network chosa' ni kansuru hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    This project is implemented to survey the current statuses and future trends of the Asian district environment-related information networks, for the (research cooperation project for development of environmental condition measuring laser radar systems), being promoted by NEDO. First, current statuses of the network names, managing organizations, user numbers, conditions of use, protocols for use, service conditions, major domestic nodes and internationally connected conditions are surveyed mainly for internet-connected networks, for surveying the current statuses and future trends of the research networks in Asian countries. Second, current statuses in Indonesia of the network names, managing organizations, user numbers, conditions of use, protocols for use, service conditions, domestic node sites and managing organizations, charge systems and institutions, types/reliability/ stability of the circuits, and conditions of restriction of use, if any, for surveying the current statuses and future trends in Indonesia. Third, conditions of and needs for network utilization by researchers for Asian district environments. (NEDO)

  14. Research result information for agriculture and environment. No.12; Nogyo kankyo kenkyu seika joho. 12

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-08-26

    Essential purposes of productivity improvement, which human being have desires in agriculture for a long time, can not be discussed without considering relations with the environment, nowadays. In these situations, significant investigations have been created among the researches in the agriculture and environment field in response to the requirements of the time. In this report, results of 41 main researches submitted to the agriculture and environment research promotion conference in FY 1995 are compiled. This field covers the environment and resource characterization, the agrioecology, and the environment assessment and control. The environment and resource characterization field includes studies on the micro-meteorological mechanism of desert expansion due to excess pasturage, the salt removal function of clays, and the protection of ground water quality by grassland. The agrioecology field includes studies on the antimicrobial substance contained in Glycyrrhiza glabra against the soil decease of potatoes caused by Streptomyces scabies and the new plant growth obstruction substance contained in Sphenoclea zeylanica. The environment assessment and control field includes studies on the producing district change prediction of main grains accompanied with global environmental change and the carbon balance in the ecosystem of farm lands and rice fields. This report includes a lot of noticeable papers. 103 figs., 24 tabs.

  15. Development and environment of new electric automobile, `Ecovehicle`; Shingata denki jidosha eko vehicle kaihatsu to kankyo

    Energy Technology Data Exchange (ETDEWEB)

    Shimizu, H [National Inst. for Environmental Studies, Tsukuba (Japan)

    1996-10-27

    This paper introduces history of the development of an electric automobile, `Ecovehicle`. It is provided with a high overall energy efficiency compared with an engine vehicle. The Ecovihicle is 1.2m in width, 3.3m in length, 2 seating capacities and 910kg in overall weight with serially connected 56 batteries of each 4V, 40Ah and having the total weight of 269kg. Its travel distance per charging is 130km at a speed of 80 k.p.h. This vehicle is capable of running with an energy of approximately one third as much as that of a light car. In addition, the vehicle is provided with polycrystal solar batteries placed on 0.6m{sup 2} area on the roof and spoiler generating 60W maximum. Assuming the annual duration of sunshine is 1,800 hours, charging is possible for 63kWh annually. Assuming the charging efficiency is 83%, charging is possible about seven times, which is an equivalent of travelling about 1,000km annually. The characteristics for example are the employment of brushless DC motor, use of energy saving switching element IGBT in order to realize a low level of loss in the inverter, in-wheel motor system, and storage of storage batteries in a hollow aluminum frame installed under the floor. 2 refs., 5 figs., 1 tab.

  16. Fibredrain method. Environmentally friendly vertical drain; Fiberdrain koho. Kankyo ni yasashii vertical drain koho

    Energy Technology Data Exchange (ETDEWEB)

    Suto, Y.; Inoue, T. [Fukken Co. Ltd., Hiroshima (Japan); Miura, N. [Saga University, Saga (Japan). Faculty of Science and Engineering; Yoshida, Y.; Hamada, K. [Hiroshima Prefectural Government Office, Hiroshima (Japan); Aboshi, H. [Hiroshima University, Hiroshima (Japan)

    1997-11-01

    Ground improvement using fibredrain (FD) material has not been used in Japan. For its practical use in Japan, laboratory experiment was made on such technological characteristics of FD material as tensile strength and permeability, and field test was also made to verify its improvement effect. A plane FD specimen of nearly 90mm wide and 9mm thick is composed of a folded double jute fabrics band and 4 twisted coir ropes arranged between the jute fabrics at even intervals, and the band is sewn up along center lines between the ropes. A mean permeability coefficient is estimated to be {kappa} = 1.0times10{sup -1}cm/s and {kappa} = 1.0times10{sup -2}cm/s at {sigma}{sup 3} = 0.5kgf/cm{sup 2} and {sigma}{sup 3} = 2.0kgf/cm{sup 2} in lateral pressure, respectively, showing sufficient permeabilities for vertical drain material. The tensile strength of fresh FD material is estimated to be a little stronger than 900kg/material width which is far stronger than that of conventional FD materials. The field test result showed that the FD material achieved the target for ground improvement, and has sufficient functions as a substitute for SD material. 6 refs., 10 figs.

  17. Investigations on an environmental technology transfer information network; Kankyo gijutsu iten joho network chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    With developing countries (APEC countries) as the main objects, investigations were carried out to issue environmental technology transfer information that Japan has accumulated, and advance exchanges of technical information with persons related inside and outside Japan. As a result of the investigations, it was found that the environmental technology information that serves more effectively for the developing countries is the technical information that has been developed by repeating improvements, has provided actual results in work sites, and is actually used, rather than the state-of-art technologies. Based on this result, business entities having factories and operation centers located in Mie Prefecture and the city of Yokkaichi were asked to provide data for the actually used environmental technologies. Out of 51 items provided by 17 companies, nine items were selected to be used as prototype database materials for an information network. The objects of information sources will be expanded to a nationwide scale in the future to improve the contents of the database. Problems of handling information copyrights and technical know-hows were presented in the course of data collection, urging the necessity of due considerations on the matter. Necessity was indicated on maintenance and management of data base as well as its quantitative expansion. 1 ref., 4 figs.

  18. International Symposium for the Promotion of APEC Environmental Technology Exchange; APEC kankyo gijutsu koryu sokushin symposium

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-11

    The International Symposium for the Promotion of APEC Environmental Technology Exchange was held under the theme `The function and role expected of the APEC Virtual Center,` with the objectives of clarifying the need for future intra-regional environmental technological exchange, defining the types of information and personnel exchange, and promoting the use of interactive character of the APEC Virtual Center for Environmental Technology Exchange by encouraging access to and participation in the Virtual Center project. It was held in the period of 11th and 12th, November in 1996, at the venue of Rinku International Convention Center in Osaka. The symposium was attended by 477 persons from nine countries, i.e., Australia, Canada, China, Indonesia, Korea, Philippines, Thailand, the US, and Japan, comprising staff members of intra-regional environment-related organizations. After the keynote speech, `Current status and tasks of environmental technology exchange`, and `Expected roles of the Virtual Center for Environmental Technology Exchange` were discussed. During the plenary session, the chairman summarized the symposium. This summary was carried on the Virtual Center homepage of the Internet

  19. Report on Asian Environment Information Network; 'Asia kankyo joho network' ni kansuru hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The goal is the construction of Asian Environment Information Network (AEInet) in accordance with a contract signed between Indonesia's LIPI (Indonesian Institute of Science) and NEDO under NEDO's Research Cooperation Project Concerning the Development of Environment Measuring Laser Radar (LR). The network is so designed and constituted as to operate on a private line between Indonesia and Japan via IP (Internet protocol) and to enable the exchange on the Internet network of the data collected/analyzed by the Indonesian LR system and of articles of e-mail between scientists of the two countries. The AEInet will be utilized for the collection/analysis of LR-collected data; exchange of observed data and the result of processing; provision of support to environment information scientists in exchanging e-mail and information; and the search of databases for the implementation of the project. In this paper, the outline and functions of the system, network system design, WWW server construction, network operating status, joint researches with Indonesia, etc., are described. (NEDO)

  20. 24-hour society and working environment; 24 jikan shakai to rodo kankyo

    Energy Technology Data Exchange (ETDEWEB)

    Fujita, Jun' ichi [Kansai Electric Power Corp., Osaka (Japan)

    1999-07-25

    Naturally, a human being has a rhythm with a period of about one day for hormone distribution and body temperature. This rhythm is called circadian rhythm. An ecological watch controlling this rhythm exists in supraoptic nucleus of brain, and its inherent period is clarified to be about 25 hours. Light, temperature, sound, smell and the like are the elements to improve arousal degree of brain and adjust the interior watch. However, a strong light does not only have the direct effect on improving immediately arousal degree and performance but can also shift the interior watch. Specifically, the interior watch becomes slower when a human body is bathed in an intensive light in midnight, whereas it becomes faster when bathed in an intensive light at daybreak. Consequently, this phenomenon can be used to shift the sleepy peak of a person on night duty from the working time to daytime sleeping time zone. The technology using light to improve arousal degree is utilized in space shuttles, atomic power plants, petroleum refineries and the like in USA. (NEDO)

  1. Emergency housing after natural disaster; Shizen saigaigo no oukyu kyoju kankyo seibi sisutemu ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Kobayashi, Masami [Kyoto University, Kyoto (Japan). Graduate School of Engineering

    1998-12-16

    In Japan, there were some serious disasters in recent years. In 1991, Unzen-Fugendake erupted and more than 1,000 people were forced to take refuge from their houses. In 1993, Hokkaido-Nanseioki earthquake attacked the south-east area of Hokkaido and more than 3,557 houses were destroyed. In Japan, the government supplies the temporary housing to those who lost house from the natural disasters. The purpose of supplying temporary houses mentioned in the disaster relief law (established in 1947) prescribes the purpose of temporary housing that to rescue the poor who can not afford getting a shelter with their own funds. But actual condition of temporary housing is completely different. Government supplies temporary housing to all those who request temporary housing. The term of using temporary house tend to become longer. The regulation about temporary housing has not been yet up to dated. Many problems concerning about temporary housing originate in outdated regulation. The temporary housing have to be ranked in the part of restoration process from natural disaster. (author)

  2. Production environment in mineral water plants; Mineral water kojo no seisan kankyo

    Energy Technology Data Exchange (ETDEWEB)

    Yoshimatsu, A. [Morinaga Engineering Company, Tokyo (Japan)

    1996-01-05

    This paper summarizes mineral waters as commercial products, and the manufacturing facilities thereof. The most widely used pattern of packaging mineral waters is to use either PET bottle or back-in box. The manufacturing process consists generally of: rough filtration of natural water, storage, activated carbon filtration, filtration, sterilization, ultrafine filtration, warm water bottling, capping, cooling, cartoning, storage, and shipment. The rough filtration removes sands. The activated carbon filtration removes water soluble organics. The sterilization is carried out under conditions of retaining the water at 75{degree}C for 15 seconds or retaining at 120 to 140{degree}C for 2 seconds. The ultrafine filtration uses a ceramic filter with a thickness of 0.2{mu}m. Sterilizing harmful microorganisms uses heating operation and filters to remove bacteria. An example may be cited that uses a bio-clean room for the purpose of controlling the harmful microorganisms. Subject microorganisms include a variety of viruses, rickettsia, bacteria, and fungi. The super-high performance (HEPA) filter used in the sterilization is demanded of collecting dusts with sizes of 0.3{mu}m or larger at a collection efficiency of 99.97% or higher. 3 refs., 4 figs., 1 tab.

  3. Biomethylation in the natural environment: a review; Shizen kankyo ni okeru biomethylation

    Energy Technology Data Exchange (ETDEWEB)

    Tao, H. [National Institute for Resources and Environment, Tsukuba (Japan); Fatoki, O. [University of Fort Hare, (South Africa)

    1997-09-25

    This paper explains mechanism of biomethylation of such elements important in environmental science as As, Hg, Sn and Pb, and its significance in the environmental science. Biomethylation is a process to bond methyl group directly to metals by actions of living organisms, which is occurring widely in the natural environment. Addition of methyl group onto metallic elements has a high possibility of changing their chemical and physical properties and increasing their movability, thus affecting the geochemical circulation. Particularly, such elements are important for the environmental science as As, Hg, Sn, Pb, Se, Te, Ge, Sb, P, S, and Cl. Deposits in water zones which have been regarded previously as final settling places for heavy metals are active media for anaerobic bacteria which can cause methylation. Important molecules involving in methylation are S-acenosylmethionine (SAM) and methylcobalamin which is a derivative of vitamin B12. The SAM is regarded as sulfonium salt, and the methyl group is transferred as a carbocationic intermediate. 106 refs.

  4. Image diagnosis of plant function under environmental pollution. Shokubutsu de kankyo osen wo shindansuru

    Energy Technology Data Exchange (ETDEWEB)

    Omasa, K. (National Inst. for Environmental studies, Tsukuba (Japan))

    1993-12-20

    Various physiological reaction of plants would be obstructed and troubles of their growth would be met under environmental pollution. There are also cases that the polluted materials as nutritious components are absorbed by plants. Consequently, if plant's reaction on this environmental pollution would be used, indexes of environmental pollution and environment can be improved. For examples, Ipomoea Nil and Petunia having high reaction on photochemical oxidate are widely used as index plant of air pollution. Zelkova trees and poplars planted as street trees can also greatly absorbed the polluted gas and have a function to clear air. In this paper, a diagnosis method by visualizing plant's reaction on environmental pollution by using technique of image measurement was explained. As devices of usable image measurement, a thermal camera, a solid measuring cameras, an ultrasonic camera, a multi-spectral camera and an X-ray TV camera were given. 6 refs., 4 figs., 1 tab.

  5. In the environmental pollution air raid of NATO; NATO no kubaku ga kankyo osen ni

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-10-05

    In recent European Union commissioned report, there was no evidence that the air raid of the NATO military in Yugoslavia became a cause of the large-scale ecology destruction until now. However, the pollution is very serious in industrial area suburb which becomes a target for Novi Sad and Pacncevo, Prahovo. The Hungary-based Regional Environment Center for Central and Eastern Europe in Hungary: REC was reported. According to REC, the pollution of the Danube river after the air raid which reaches for 11 weeks by the NATO military was serious, and ammonia of 100 tons, ethylene dichloride over the 1 thousand tons, 33% hydrochloric acid solution of the 1 thousand tons escaped to the Danube river from the air raid of Pancevo on April 18th. And, the mercury accumulated in sodium hydroxide of about 3 thousand tons, liquid chlorine of several decade tons and chlorine/alkali plant also escaped from Pancevo. United Nations-led Environmental Damage Assessment Mission should inspect Kosovo and Yugoslavia on July 19th, and it was announced with 'NATO does not show still us all well-informed information'. The investigation is carried out on the item which the Yugoslavia authorities designates, and the atmosphere level of VCM has reached 10600 times the concentration of the acceptable level near Pancevo, and it reports that acid rain was observed in each place. (translated by NEDO)

  6. Environmental pollution by dioxin and its biodegradation; Dioxin ni yoru kankyo osen to sono biseibutsu bunkai

    Energy Technology Data Exchange (ETDEWEB)

    Nojiri, H.; Yamane, H.; Omori, T. [Tokyo Univ. (Japan)

    1998-10-20

    Polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and coplanar polychlorinated biphenyls (Co-PCBs) exhibit similar chemical and biological properties. Because of their highly toxic activity, the pollution with these compounds, which are called dioxin-related compounds, is one of the most serious environmental problems. In this review, we described the analytical methods of dioxin-related compounds in environmental samples, especially in the exhaust gas from the incineration site of municipal solid waste. In addition, we described the present situation of environmental pollution by dioxin-related compounds, including pollution levels in environmental, human, and food samples, daily intakes, and risk assessment. On the other hand, a number of microorganisms have been reported which are able to degrade dioxin-related compounds including PCDDs and PCDFs. These microorganisms are classified into two groups, lignin-degrading white rot fungi and the dioxin-degrading bacteria. We also described the degradation pathways of dioxin-related compounds in these microorganisms, and their degradative enzymes. 47 refs., 5 figs., 4 tabs.

  7. Application of FEM flow analysis to environmental engineering. FEM ryutai kaiseki no kankyo gijutsu eno tekiyo

    Energy Technology Data Exchange (ETDEWEB)

    Higuchi, M; Ando, K; Shimada, S; Umetani, H [Toyota Motor Corp., Aichi (Japan)

    1990-04-25

    In order to apply FEM (finite element method) flow analysis to environmental engineering, the two-dimensional analysis system was developed, and applied to the design of plant ventilation and improvement of an enviromental control equipment. Furthermore, the three-dimensional analysis system was developed to extend its application. Since in a large scale model, no enhancement of a processing capacity was expected even by a supercomputer because of longer I/O times between internal and external memories caused by a small internal memory space, the parallel processing system with multiple external memories was introduced to analyze such models. To achieve more efficient processing, multiple series of renumbering codes were also prepared to optimize the processing order of solvers, elements and nodes. As examples, the improvement of a thermal oxidizer and the ventilation design for a forging plant, and as an example of a three-dimensional large scale model, the flow analysis around a plant were presented. 8 refs., 17 figs., 1 tab.

  8. Synthesis of new erodable polymers response to environmental stimuli; Atarashii kankyo chowagata bunkaisei plastic no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Kato, M; Nagasaki, Y [Science University of Tokyo, Tokyo (Japan). Faculty of Industrial Science and Technology

    1997-02-01

    This report relates to the designing of functional materials that decompose in response to various signals. A derivative of {alpha}-bromomethylstyrene is caused to act on the living anions of {alpha}-methylstyrene for the synthesis of a pyrolytic polymer having unsaturated groups at its terminals. The terminal double combinations of this polymer split under the influence of heat, acid, or base for depolymerization which is quantative, and the decomposition temperature may be controlled by replacing terminal phenylallylic groups with methyl groups or phloro-groups. Furthermore, a novel polythyramine polymer is synthesized with its principal chain constituted of NCH2CH2Si, the principal chain easy to disintegrate when exposed to an electron beam. The polymer is signal-responsive and may be patterned by use of an electron beam. As a temperature-responsive polymer with the hydrolytic feature controlled, poly(thyroxy ethylene glycol) is obtained from a derivative of diaminosiloxane and oligo-oxyethylene. This is a high-mobility, temperature-responsive material whose hydrolysis may be controlled. 3 refs., 2 figs.

  9. Our trials of recovering wetlands for waterbirds; Mizudori to mizube kankyo zukuri

    Energy Technology Data Exchange (ETDEWEB)

    Hasuo, S. [Chiba Prefectural Government Office, Chiba (Japan)

    1994-08-10

    This paper explains the ecology of wild birds, and describes a number of attempts at the Gyotoku wildlife sanctuary to build wetland environments for waterfowls to live. Many of wild birds use shallow marshy grounds, rivers, ponds, and tidelands as their place of living. There are not only birds living on fishes, but like wild ducks those living on plant seeds, algae on mud, and small animals. Others live on shellfishes and insects. Their environmental conditions for hatching and breeding are also a large factor. Among the `estuary area sets` where these environmental conditions are available, the continuation of tidelands is now endangered. One example is the Shinobazu pond in Ueno, Tokyo. Fulica, for example as a representative bird living at swamps, requires vegetation around its living area, affluent submerged plants, an open area with a radius of at least 200 meters to be available, and water depths from about 0.5 m to 2 m. At the Gyotoku wildlife sanctuary, long-lasting observations are continued at several test ponds having different conditions and water qualities. 4 figs.

  10. Estimation of subsurface-fracture orientation with the three-component crack-wave measurement; Kiretsuha sanjiku keisoku ni yoru chika kiretsumen no hoko suitei

    Energy Technology Data Exchange (ETDEWEB)

    Nagano, K; Sato, K [Muroran Institute of Technology, Hokkaido (Japan); Niitsuma, H [Tohoku University, Sendai (Japan)

    1996-05-01

    This paper reports experiments carried out to estimate subsurface-fracture orientation with the three-component crack-wave measurement. The experiments were performed by using existing subsurface cracks and two wells in the experimental field. An air gun as a sound source was installed directly above a subsurface crack intersection in one of the wells, and a three-component elastic wave detector was fixed in the vicinity of a subsurface crack intersection in the other well. Crack waves from the sound source were measured in a frequency bandwidth from 150 to 300 Hz. A coherence matrix was constituted relative to triaxial components of vibration in the crack waves; a coherent vector was sought that corresponds to a maximum coherent value of the matrix; and the direction of the longer axis in an ellipse (the direction being perpendicular to the crack face) was approximated in particle motions of the crack waves by using the vector. The normal line direction of the crack face estimated by using the above method was found to agree nearly well with the direction of the minimum crust compression stress measured in the normal line direction of the crack face existed in core samples collected from the wells, and measured at nearly the same position as the subsurface crack. 5 refs., 4 figs.

  11. Analysis of combustion in an ATAC engine with measurement of radical luminescence; Radical hakko keisoku ni yoru ATAC engine no nensho kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    Park, Y; Oguma, H; Ueda, H; Iida, N [Keio University, Tokyo (Japan)

    1997-10-01

    In order to make clear of the combustion mechanism and the frame structure in two stake, so called, active thermo-atmosphere combustion (ATAC) engine fueled by gasoline and methanol, we measured the 2-demensional images of OH, CH and C2 radical band spectra in both ATAC and SI combustion mode. From the results of pressure data in the cylinder, the heat release rate was calculated. We evaluated the correlation of radical luminescence intensity and the rate of heat release. 3 refs., 4 figs., 2 tabs.

  12. Quantitative measurements of air-fuel mixture distribution in a cylinder using LIF; LIF ni yoru tonai kongoki nodo no teiryoteki keisoku

    Energy Technology Data Exchange (ETDEWEB)

    Kato, S; Kadoi, N [Subaru Research Center, Tokyo (Japan)

    1997-10-01

    It is necessary to understand the mechanisms of mixture formation in a cylinder to improve engine performance, especially for a gasoline direct injection engine. In this study, a quantitative air-fuel mixture measurement technique using PLIF was developed. Across a laser sheet, a transparent liner was placed between two calibration cells which increased the reliability of fuel concentration. This technique was applied to gasoline direct injection engine to clarify the effect of injection timing on stratified charged mixture. 4 refs., 6 figs., 3 tabs.

  13. Latest groundwater investigating methods and measuring techniques. 1. ; Investigation on aquifer distribution (investigation method). Saikin no chikasui chosa hoho to keisoku gijutsu. 1. ; Taisuiso no bunpu chosa (tansaho)

    Energy Technology Data Exchange (ETDEWEB)

    Yamai, T [Asia Air Survey Co. Ltd., Tokyo (Japan)

    1993-06-30

    This paper explains groundwater investigating methods, introducing particularly two methods. The resistivity tomography is a method to measure potential distribution generated when current is applied around an area to be investigated. Using the measurement result as projection data, the resistivity distribution is restructured within the area of the investigation. The paper summarizes the measurement method (measuring equipment, electrode arrangement, etc.), the analytic method (establishment of an initial model, and the alpha-center method to calculate theoretical potentials corresponding to the model), and an application example of the method in which the resistivity change was observed using permeation of salt tracers. The resistivity imaging method (two-dimensional resistivity analysis method) is superior in practicability to the above method under the present state of the art. This method does not differ from the conventional resistivity method in methodology, but improves the analytic accuracy over the conventional electrical investigation method as a result of analysis combining the simplified two-dimensional analysis method with the alpha-center method. A summary is given on the measuring and analyzing methods. 13 refs., 10 figs.

  14. Examination of optimal data acquisition for evaluation of PV systems; Taiyoko hatsuden system hyoka no tame no saiteki keisoku shuho no kento

    Energy Technology Data Exchange (ETDEWEB)

    Sugiyama, H; Kurokawa, K [Tokyo University of Agriculture and Technology, Tokyo (Japan); Otani, K; Tsuda, I [Electrotechnical Laboratory, Tsukuba (Japan)

    1996-10-27

    A 70 kW-class photovoltaic (PV) power generation system of the Tsukuba Research Cooperation Center, Agency of Industrial Science and Technology was evaluated using hourly measurement data. Hourly solar irradiation, mean PV module temperature, hourly array generated power, hourly PV system generated power were selected as the measurement items, to examine the validity of measurement method. Furthermore, based on these measurement data, the loss factors were estimated, which reduce the system efficiency. They included the losses due to the shadow effect, the deterioration of module efficiency with the raise of temperature, the mismatch of tracking control of the maximum power point, and the reduction of inverter efficiency with the input power phenomena. To estimate these loss factors from hourly measurement data, the system was evaluated by defining characteristic parameters. As a result, it was found that the main factors were the shadow effect and the mismatch loss, which reduce the mean annual output factor of the system to 65%. 3 refs., 6 figs., 1 tab.

  15. Development of optical interference-type micro accelerometer for subsurface microseismic measurement; Micromachining ni yoru chika danseiha keisoku no tame no hikari kanshogata kasokudo sensor no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Hirata, K; Niitsuma, H; Esashi, M [Tohoku University, Sendai (Japan). Faculty of Engineering

    1997-10-22

    Manufacture is under way of an optical interference-type micro accelerometer making use of the micromachining technology and an optical fiber measuring system for detecting microseismic waves in the ground. The sensor is required to be capable of detecting acceleration 0.1-1gal in amplitude, to be flat in amplitude characteristic in a frequency range of 10Hz-several kHz, to be ensured of straight phase characteristics to enable the measurement of transient phenomena, to be low in cross sensitivity, and to be high in resistance to water, pressure, and heat. The sensor is constructed in the following way. In the process for treating silicon, anisotropic etching is performed for the formation of a gap between the fiber end face and oscillator, boron is diffused, a stopper is formed, and then the silicon is subjected to penetrating etching. In the process for the optical fiber section, an optical fiber is inserted into a glass tube and fixed by an adhesive agent, and then the glass tube end face is polished, this together with the fiber end. Indium-tin oxide is sputtered onto the glass tube end. Finally, the sensor is assembled. 5 refs., 4 figs., 1 tab.

  16. Applying flame colors to mixture strength measurement in laminar premixed flames. 2nd Report; Kaenshoku ni yoru soryu yokongo kaen no toryohi keisoku. 2

    Energy Technology Data Exchange (ETDEWEB)

    Tatsuta, S. [Asahikawa National College of Technology, Hokkaido (Japan); Fujita, O.; Ito, K. [Hokkaido University, Sapporo (Japan). Faculty of Engineering

    1998-09-25

    The flame color method to measure mixture strength in laminar premixed flames was investigated as a new combustion diagnostic technique. Flame colors were quantitatively determined by chromaticity coordinates (x, y) defined by the CIE 1931 standard colorimetric system. Using 12 types of hydrocarbons, the (x, y) of an inner cone in premixed laminar flames held on a circular tube burner were measured with a colorimeter, and the relationship between the (x, y) and the equivalence ratio {phi} of the mixture was examined in a range of {phi}=0.9 to 1.4. The experimental results indicated that the equivalence ratio could be measured with accuracy of 0.008-0.014 and error due to axial position in the inner cone was less than 0.02-0.05. Humidity of air had almost negligible effects on the accuracy of the measurement. Results also indicated that the effect of back-light could be corrected by introducing the concept of additive mixture of color stimuli. 21 refs., 8 figs., 2 tabs.

  17. Fiscal 2000 pioneering research on the research on high-sensitivity passive measurement/analysis technologies; 2000 nendo kokando passive keisoku bunseki gijutsu no chosa sendo kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The above-named research was brought over from the preceding fiscal year. Needs for passive measurement were investigated, and it was found that what are named below were interested in passive measurement. Wanting passive measurement technology were the analysis of organic matters on semiconductor wafers, analysis of dangerous substances in wastes, measurement of substances in the life space causing allergy to chemical substances, measurement of constituents of gas emitted by organisms for example through expiration, measurement for automatic sorting of plastic wastes, 2-dimensional spectrometry for medical treatment of organisms, and so forth. In the survey of seeds, various novel technologies were investigated in the fields of optical systems, sensors, and signal processing. The outcomes of the survey indicated that high-sensitivity measurement and analysis of spectral images, measurement and analysis of trace quantities in he fields of medical treatment, environmental matters, and semiconductors would be feasible by the use of newly developed technologies involving the interference array type 2-dimensional modulation/demodulation device, 2-dimensional high-sensitivity infrared sensor, high-sensitivity systematization technology, mixed signal separation technology capable of suppressing noise and background light, and technology for increasing processing speeds. (NEDO)

  18. Achievement report on research and development of optics-aided measurement/control system; Hikari oyo keisoku seigyo system no kenkyu kaihatsu ni kansuru hyoka hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1986-03-01

    The project aims to establish technologies for putting the above-named system to practical use. Such a system will measure, transmit, and control, with safety and stability by use of optical technologies, industrial process related information to be generated in certain areas such as industrial complexes and very large plants, the information including images, temperatures, flow rates, constituents, etc. Total system evaluation was performed in demonstration tests for appropriateness conducted for 32 systems in fiscal 1980 and 10 systems in fiscal 1981. Studied in the development of element technologies are opto-electronic integrated circuits (OEIC), semiconductor laser devices, light-intercepting devices, optical transmission paths, dielectric light switches, and optical sensors. For OEIC, in particular, since it is believed to be the nucleus of an optical application system, an optical technology joint research office is established, where efforts center on the substrate crystal growth technology, process technology, and crystal/process evaluation technology. (NEDO)

  19. Automobile simulation model and its identification. Behavior measuring by image processing; Jidosha simulation model to dotei jikken. Gazo kaiseki ni yoru undo no keisoku

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, H; Morita, S; Matsuura, Y [Osaka Sangyo University, Osaka (Japan)

    1997-10-01

    Model simulation technology is important for automobiles development. Especially, for the investigations concerning to ABS, TRC, VDC, and so on, the model should be the one which can simulates not only whole behaviors of the automobile, but also such internal information as torque, acceleration, and, velocity of each drive shafts, etc.. From this point of view, 4-wheels simulation model which can simulates almost over 50 items, was made. On the other hand, technique of 3-D image processing using 2 video cameras was adopted to identify the model. Considerably good coincidences were recognized between the simulated values and measured ones. 3 refs., 7 figs., 2 tabs.

  20. Fundamental study on leak detection of underground gas pipeline using passive acoustic method; Judogata onkyo keisoku ni yoru maisetsu gas dokan hason kasho no kenshutsu ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Jinguji, M; Imaizumi, H; Kunimatsu, S; Isei, T [National Institute for Resources and Environment, Tsukuba (Japan)

    1997-05-27

    With an objective to detect gas leaking from an underground gas pipeline, discussions have been given on a method which utilizes acoustic characteristics of leakage. On leaking sound generated from damaged portions, the form of damaging was hypothesized as pinholes, and spectra of leaking sounds from holes with different diameters were measured. The dominant frequency decreases as the hole diameter increases, while it is in a region of relatively high frequency of 1 kHz or higher. However, detection from the ground surface was impossible when cover soil has thickness from 0.5 to 1.5 m. In an experiment to measure leaking sound inside the pipe, pressure in the pipe was adjusted to 0.02 atm which is a standard pressure for a low-pressure pipe, and the sound was measured when the hole diameters were varied. In any of the results obtained by varying the hole diameter, spectra having the dominant frequency in the region of 1 kHz or higher were measured. In addition, it was found that sound pressure difference of as much as 50 dB at maximum is generated as compared with a case of no sound leakage. The above results verified that monitoring the high frequency of 1 kHz or higher is effective in detecting leakage from small damages. 2 refs., 4 figs.

  1. New method for 3-dimensional visualization of distributed gas using laser ultrasonic technique; Laser choonpaho ni yoru gas no 3 jigen kukan bunpu keisoku

    Energy Technology Data Exchange (ETDEWEB)

    Ochiai, M.; Kubo, K.; Kanemoto, S. [Toshiba Corp., Tokyo (Japan); Kokubo, T. [Tokyo Electric Power Co., Inc. (Japan)

    1998-11-30

    In case that detection of gas leak is performed applying gas sensors, not only sensing for extremely small amount of gas but also measurement of spatial distribution state from the viewpoint of identification of leaking places are important. Meanwhile, it is known that the methane, main component in fuel gas, has characters which absorbs ray having certain specific wavelength and in addition emits its absorbed energy acoustically. As to a photo-acoustic effect in an open space, it is newly found that the signal has a frequency of about 40 kHz and a propagation directivity which is perpendicular to the laser axis. In the feasibility test based on this property, methane molecules are excited by an optical parametric oscillator (OPO) type laser source which has a wavelength of 1330 micron and an output power of about 5 mJ/pulse. Array microphones and 2-dimensional laser scanning system are used for detecting the gas distribution. In the next place, owing to analyzing phase differences of sound wave on the basis of oscillation time of pulse laser, it was verified that the 3-dimensional distribution of gas was measurable. 8 refs., 9 figs., 2 tabs.

  2. Report on achievements in fiscal 1998. Development of a technology to measure biological molecular interactions; 1998 nendo seitai bunshi sogo sayo no keisoku gijutsu no kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    It has been indicated possible in principle in recent years to measure biological molecular interactions with the molecules in the living state by combining the technologies called the co-focussing optical system and the fluorescence correlation spectroscopy (FCS). The FCS method is a method capable of analyzing concentrations, sizes, and inter-molecule interactions through detection of fluorescence fluctuation in single molecules in submicron zones. In spite of the FCS method being a very effective method to measure interactions in biological molecules, the technology has not reached a level that allows easy utilization under the present condition. The present research and development is intended to solve the technological problems in the FCS method in the co-focussing optical system, and perform as many research and development works as possible in a short time to establish a technological foundation that can be provided to bio-industrial and medical sites. Particularly, in order to make the utilization thereof possible in measuring biological molecular interactions in cells, a measuring technology using the bi-photon excited fluorescence correlation spectroscopy was established with an objective to reduce damages to cells and their internal micro organs, and minimize effects of interference signals from the own fluorescence. (NEDO)

  3. Polarimetric borehole radar measurement near Nojima fault and its application to subsurface crack characterization; Polarimetric borehole radar ni yoru Nojima danso shuhen no chika kiretsu keisoku jikken

    Energy Technology Data Exchange (ETDEWEB)

    Sato, M.; Taniguchi, Y.; Miwa, T.; Niitsuma, H. [Tohoku University, Sendai (Japan); Ikeda, R. [National Research Institute for Disaster Prevention, Tsukuba (Japan); Makino, K. [Geophysical Surveying and Consulting Co. Ltd., Tokyo (Japan)

    1997-05-27

    Practical application of subsurface crack characterization by the borehole radar measurement to which the radar polarimetric method was introduced was attempted to measuring objects for which the borehole radar has not been much used, for example, the inside of low loss rock mass or fracture zone where cracks tightly exist. A system was trially manufactured which makes the radar polarimetric measurement possible in the borehole at a 1000m depth and with a about 10cm diameter, and a field experiment was conducted for realizing the subsurface crack characterization near the Nojima fault. For the measuring experiment by the polarimetric borehole radar, used were Iwaya borehole and Hirabayashi borehole drilled in the north of Awaji-shima, Hyogo-ken. In a comparison of both polarization systems of Hirabayashi borehole, reflected waves at depths of 1038m and 1047m are relatively stronger in both polarization systems than those with the same polarization form and at different depths, whereas reflected waves around a 1017m depth are strong only as to the parallel polarization system. Characteristics of the polarization in this experiment indirectly reflect crack structures. 6 refs., 6 figs., 1 tab.

  4. Development of multi-filter spectroradiometry; Filter hoshiki ni yoru bunka hosharyo no keisoku hoho to sono supekutoru no hyogen hoho ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Miyake, Y; Aoshima, T; Minoda, T; Kato, T; Kondo, S [Eiko Instruments Trading Co. Ltd., Tokyo (Japan)

    1996-10-27

    Described in this paper is a technique of solar radiation spectroradiometry in which high-resolution wavelength computation adds to a multi-filter method. The solar spectrum upon entering the atmosphere is scattered and absorbed by parameter-constituting elements such as gas, aerosol, cloud particles, etc., and its spectral contour is complicatedly deformed relative to wavelength. Taking advantage of the fact that the scattering and absorbing characteristics of some of the elements are constant relative to wavelength, a simple equation was constructed to enable high-resolution spectrum measurement wavelength-wise, and this compensates for the limit in measurable wavelength that the conventional multi-filter method suffers from. The new method discussed here is not so expensive as the grating method thanks to the employment of filters, is capable of determining spectral radiation quantities with a precision of {plus_minus}5%, and is reduced in terms of the capacity of memory for data storage. The new method enables data collection under various atmospheric conditions that the four seasons present, which the difficult-to-apply and expensive spectroradiometer fails. It is expected that this method will find its use in collecting basic data for the designing of photovoltaic power generation systems, in the study of photochemical reaction in agriculture, and in collecting basic data for daylight lighting. 1 ref., 6 figs., 2 tabs.

  5. Leading research in fiscal 1996. Research study on advanced measurement/analysis technology; 1996 nendo sendo kenkyu. Kodo keisoku bunseki gijutsu ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For development of production technologies suitable for environment, safety and advanced information-oriented society by improving the flexibility of production lines, some new measurement technologies were researched. Problem solution was attempted by combining the in-situ multi-dimensional measurement technology capable of easily obtaining various 3-D information with the non-contact photon measurement technology superior in operability and sensitivity under any environment conditions. This solution requires a compact radiation source with higher brightness and wider spectral range, and a high-sensitive detector. The technology concentrating photon onto minute regions, high-efficiency transmission, and control technology of photon wave front are also necessary. Development and international standardization of a common interface is unavoidable. In addition, its network is essential for advanced use of multimedia,. In the future, the comfortable life surrounded by advanced products and multimedia, comfortable social environment, safety and resource saving will be achieved by this technology. 94 refs., 75 figs., 15 tabs.

  6. FY1995 study on objective measurement of mental stress caused by operation; 1995 nendo kiki sosa ni okeru seishinteki fuka no kyakkanteki keisoku gijutsu ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The task with operating highly functional and intelligent machines, is supposed to cause the mental stress such as tension, anxiety or fear, owing to the operation itself and movement of the machines. The purpose of the project is to establish the physiological sensing technique in objective measurement of the various mental stress caused by the operation or the movement of machines, aiming at designing the optimal interfaces in man-machine system. Subjective quantities and physiological responses are measured, under the stresser of five different conditions, such as a monotonous task, a task which causes tension, and a motion of a robot which causes fear. BP, ECG, and are measured as Physiological items. More precisely, the variation in systolic pressure, RRI of heartbeat or LF/HF value obtained by its spectrum analysis, and the power spectrum of a wave or CNV area derived from spectrum analysis of EGG, are obtained for each item. The results of the experiment show that subjective responses such as irritation, tension and concentration due to the increase of the task load, and fear caused by the movement of machines, are able to be measured by physiological responses such as BP, ECG and EEG. (NEDO)

  7. Research on elaboration of the action plan for the New Earth 21; `Chikyu saisei keikaku` no jisshi keikaku sakusei ni kansuru chosa jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Elaboration of the action plan for the New Earth 21 plan proposed by Japan in Houston Summit was researched. In fiscal 1995 three types of energy supply/demand scenarios, sensitivity analysis under various conditions, and cases presupposing CO2 emission regulations or not were evaluated by analysis toward 2050 using the New Earth 21 Model (NE 21 Model). Energy-saving is important, and CO2 recovery/treatment technology is introduced according to CO2 emission regulations, while attention is focussed on biomass energy. The issue of solar and wind power generation is cost reduction. In a presupposed horizontally integrated energy system, methanol represents an important intermediate energy. As a whole, CO2 reduction can be achieved by various combinations of energy-saving, introduction of regenerative energy, and CO2 recovery/treatment technology. Case studies of the action plan were conducted by unifying the evaluation criterion on coal IGCC, photovoltaic generation and biomass. The NE 21 Model was useful for elaboration of the reduction scenarios of CO2 emission. 26 refs., 84 figs., 28 tabs.

  8. Fiscal 1998 report on international joint research project for preventing global warming; 1998 nendo chikyu ondanka boshi kokusai kyodo kenkyu jigyo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-12-01

    Japanese researchers were dispatched to research institutes abroad for conducting joint studies on nine subjects for which such efforts would work effectively. The researchers were sent to various research institutes in the U.S., Britain, Germany, and others. The nine subjects were (1) the application of the most up-to-date welding and bonding technologies to liquid hydrogen storage/transportation containers, (2) development of low-temperature high-activity metal catalysts for energy conservation processes, (3) study of CO2 emission behavior using a large-scale simulator of deep sea circumstances, (4) study of condensation control for steam and chemical species in the global atmosphere, (5) numerical analysis of semiconductor crystal growth for ultralow loss power device, (6) development of sulfur-rich hydrocarbon gasification technology using a metal melting furnace, (7) assessment of techniques for evaluating origins of environmental pollution gas, geothermal gas, and soil gas using multiple isotopes, (8) analysis of behavior of the steam circulation type turbine system, and (9) the embodiment of a large premixed compression ignition engine. (NEDO)

  9. Measures to prevent global warming, and NEDO's energy-saving model projects; Chikyu ondanka boshi taisaku to NEDO sho energy model jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-09-01

    Described herein are United Nations Framework Convention on Climate Change and the world AIJ (Activities Implemented Jointly) projects, and the Japan's measures and NEDO's energy-saving model projects therefor. NEDO has been inviting the public to join the contests for the projects to be implemented as part of the AIJ Japan program for the first time since April 1996. A total of 11 projects were adopted in July, including the model project for recovering heat from red-hot coke with inert gas, to be implemented by NEDO in China. After the first invitation, an individual proposal will be accepted and examined for which no time limit is set. The NEDO's model projects approved so far include demonstration studies on facilities for effective utilization of paper-making sludge, waste heat recovery at steel furnaces, energy-saving at electric furnaces for alloys, effective utilization of waste heat at garbage incinerators, and power saving at cement kilns. (NEDO)

  10. Global environmental benefits of industrial heat pumps (fiscal 1993); 1993 nendo koon heat pumping gijutsu ni yoru chikyu ondanka keigen koka ni kansuru chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    An investigational study was conducted aiming at making a quantitative grasp of effects of the spread of industrial heat pumps on energy conservation and greenhouse gas reduction and at promoting the spread. Finally, the following eight countries joined this international joint research: Canada, France, Japan, Holland, Norway, Sweden, the U.K. and the U.S. Each country share the work and expenses for the research with each other. Japan made investigational researches on the application of heat pumps to processes of the chemical industry, oil refining industry, food industry, paper/pulp industry, and dyeing/weaving industry, and on the effects of greenhouse gas reduction. As procedures taken, values up to 2010 were estimated of energy prices in each country, energy supply/demand, rates of the heat source configuration for electric power supply, etc., the heat flow of the above-mentioned process was made clear, and analyses were conducted of annual profits, energy consumption, and depreciation period in the case of adopting heat pumps. Moreover, the energy conservation amount and greenhouse effect gas reduction amount were estimated based on the result of the analyses. 69 figs., 196 tabs.

  11. Survey of implementation plan constructed for `the New Earth 21 Project`; Chikyu saisei keikaku no jisshi keikaku sakusei ni kansuru chosa jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    It is necessary to establish scenarios for reducing CO2 emissions and for developing CO2 emission control technologies to obtain a global consensus, using appropriate analytical models. For modification of the DNE-21 (Dynamic New Earth 21) model, it has a category designated as innovative technologies not involving CO2 emission and an optional consideration for the absorption of atmospheric CO2 by biomass. A global carbon circulation model, including vegetation in its scope, is also incorporated. Major results of the simulation are shown. When 20% reduction in CO2 emissions is required for only OECD countries after the year 2020, it has been demonstrated that CO2 concentration in the atmosphere will reach as high as about 900 ppm in 2100 due to CO2 emission by developing countries, and will not be a tolerable level. Under the condition that CO2 concentration in the atmosphere is controlled at 450 ppm in 2100, the amount of renewable source of energy from photovoltaic power generation and biomass will increase and technologies of CO2 recovery and storage will decrease. Research and development of the production of methanol from recovered CO2 will be adopted as innovative technology for CO2 measures. 69 refs., 112 figs., 79 tabs.

  12. Landslide (4). ; Landslide and water-geochemical investigation. part 1. Jisuberi. (4). ; Jisuberi to mizu-chikyu kagakuteki chosa. sono 1

    Energy Technology Data Exchange (ETDEWEB)

    Yoshioka, T [Kyoto Univ., Kyoto (Japan). Disaster Prevention Research Inst.

    1990-08-31

    Laying emphasis on the groundwater quality in landslided areas, origin of dissolved ions in the groundwater, characteristics of water quality at landslided areas, classification of groundwater mass, flow and flow direction of groundwater, relation between water quality and groundwater flow, composition of dissolved gases, isotopes, growing process of water quality, formation of clay minerals and water quality, etc. are described. In general, ions contained in the groundwater originate in rainwater and falling matter; human activity; volcanoes and hot mineral springs; rock and soil; etc. The problems with the quality of water in landslided areas are Na {sup +} and Ca {sup 2} as positive ions and HCO {sub 3} and SO {sub 4}{sup 2 {sup minus}} as negative ions. It can be understood that change in the chemical composition of the groundwater caused by the flow of the groundwater is closely related to the weathering of rocks. Examples of investigation on groundwater flow by chemical injection are introduced. The composition of gases dissolved in groundwater is as important as the dissolved components for the study of the origin and history of groundwater. 34 refs., 16 figs., 7 tabs.

  13. Geochemical fixation of carbon dioxide in the environment. Chikyu kagakuteki kenchi kara no tansan'en ni yoru nisanka tanso no kotei

    Energy Technology Data Exchange (ETDEWEB)

    Ishikawa, M [Mitsubishi Research Institute, Inc., Tokyo (Japan)

    1993-06-15

    The Mitsubishi Research Institute has investigated and discussed the current situation and the future direction of the studies on geochemical fixation of carbon dioxide by means of carbonates. This paper summarizes the results thereof. The discussion items are listed as follows: The current status of land areas active in carbonate fixation (lake-bottom deposits, sabkha, dry areas, carbonate rock areas); investigation on sea areas active in carbonate fixation (coral reef areas, land shelf areas, open sea areas, and mantle); development of environmental change analyzing technologies (measurement of ancient environments, measurement of fixation ages, development of local area analysis, measurement of diagenetic structures, origin and behavior of trace elements in carbonate substances, and measurement of the current environments); evaluation on fixation ability of carbon sinks (circulation and fixation in coral reef ecosystems, calcification mechanisms in calcareous algae, dissolution processes at ocean bottoms, and inorganic chemical measurement); and investigation on simulation models (solution chemistry equilibrium model and global carbonate circulation model). 4 refs., 1 tab.

  14. Function of coral reef for glbal scale circulation of carbon dioxide. Chikyu kobo no CO sub 2 junkan ni okeru sangosho no yakuwari

    Energy Technology Data Exchange (ETDEWEB)

    Kayane, H [Geological Survey of Japan, Tokyo (Japan)

    1990-12-01

    Together with the global warming problem, it becomes important to elucidate the carbon dioxide circulation in global scale mechanism. Within a part of that elucidation, explanation of function and ecology was made of coral reef, fixing carbon dioxide through two passages, ie., formation of potassium carbonate skeleton and formation of organic matter. The coral reef is judged to become effective sink of carbon dioxide by the photosynthesis by symbiotic seaweed in coral body and coral formation of potassium carbonate skeleton. The coral reef is higher than the tropical rain forest in diversity and productivity of biological matter. In addition, the formation of potassium carbonate also fixes carbon dioxide. Its producing rate of organic matter is 2.5kgC/m {sup 2}/year, which is 20 times as high as that of offshore region. Also, its sedimentary rate is more than several hundreds of times as high as that by Foraminifera in the offshore region. Therefore, its effective control is important, though it still has unknown points. 22 refs., 13 figs., 1 tab.

  15. Report on achievements of research and development of a technology to apply human senses to measurements in fiscal 1994. 2. Main issue (Part 1 for research and development of a physiological effect measuring technology); 1994 nendo ningen kankaku keisoku oyo gijutsu no kekyu kaihatsu. 2. Honronhen (Seiriteki eikyo keisoku gijutsu no kenkyu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    This research and development was performed on (1) a composite physiological function measuring technology for stress measurement, (2) a contact-free skin temperature measuring technology, and (3) a stress indexing substance measuring technology. With regard to the subject (1), the target for the current fiscal year is to restructure a small restraint-free skin impedance measuring device into a practical device that can be used easily at working sites. In order to achieve the goal, electric power conservation and size reduction were moved forward by improving the circuit design, and stabilized measurement, in which the measurement algorithm is made more intelligent, was realized. With regard to the subject (2), the contact-free skin temperature measurement device having been structured by the previous fiscal year was given improvements in such parts as the infrared and visible image input, image processing, and data indication and sense volume estimation. With respect to the subject (3), the technology was established to measure such stress indexing substances as CS and CA from saliva. Positioning of CS and CA as the stress indexing substance was nearly completed. The stress indexing substance measuring device was tried of structuring the prototype A and prototype B applying the semi-micro specifications for an attempt of clearing the steps toward practically usable device. (NEDO)

  16. FY 2000 report on the results of the research and development project for the photon-aided instrumentation and processing technologies. Research and development of the advanced instrumentation and processing technologies for oil production systems; 2000 nendo photon keisoku kako gijutsu seika hokokusho. Sekiyu seisan system kodo keisoku kako gijutsu kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Described herein are the FY 2000 results of development of the photon-aided instrumentation and processing technologies, as part of development of the advanced instrumentation and processing technologies for oil production systems. The program for the microscopic processing technology combines iodine and YAG laser beams as the high-power laser beams of wavelength of the order of 1{mu}m, in order to realize laser-aided welding of high-quality thick plates, the welding demonstration tests producing good results; improves an in-process monitoring sensor, to confirm its high reliability; and improves size controllability for ultrafine semiconductor particles for development of quantum functional optoelectronic devices, and extends the electric conductivity for production of the transparent conducting films. The program for the non-destructive composition measuring technology develops a light source which produces short wavelength ray of sufficient brightness; produces three-dimensional CT images with a resolution of 2{mu}m, and is developing superconducting X-ray detectors. The program for the high-power all-solid-state laser technology starts development of a rod-type oscillation-controlling laser which can provide mixed operations of CW, pulsed and Q-switched oscillation modes at an average power of 1kW level. The program for the tightly-focusing all-solid-state laser technology develops the prototype of disk type fiber laser using silica fibers of rectangular cross-section, which produces a power of 103W, and starts development of a laser diode. (NEDO)

  17. Report on achievements of research and development of a technology to apply human senses to measurements in fiscal 1992. 2. Research and development of a physiological effect measuring technology (Part 1); 1992 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu. 2. Seiriteki eikyo keisoku gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-03-01

    This paper describes the physiological effect measuring technology, extracted from the achievements in the development of a technology to apply human senses to measurements in fiscal 1992. In the composite physiological function measuring technology to measure stresses, improvement was made on the skin impedance measuring device of tri-electrode double-point simultaneous measuring type. A non-contact measuring device using a light sensor was developed as a spontaneous blinking detecting system. A prototype device that can measure blood pressure continuously at the temple was developed, and its usefulness was verified. In non-contact skin temperature measurement, expansion was performed on the image input type visible camera, infrared ray camera and other systems produced to date, and hardware structuring was completed. For the software, person extracting, position recognizing and attitude determining algorithms were developed, whose effectiveness was verified experimentally. A prospect was reached that in measuring stress indexing substances, the measurement can be performed non-invasively using small amount of saliva and urine. The sensitivity was enhanced 20 to 5000 times in catecholamine, and ten times in corticosteroid as much as that in the previous year. It is estimated that on-line measurement may be executed on cortisol by using saliva sample of 100 to 200 {mu} L. (NEDO)

  18. FY 1991 report on the results of the contract R and D of the human sense measuring application technology. Volume 2. R and D of the physiological effect measuring technology (Part 1); 1991 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu itaku kenkyu seika hokokusho. 2. Seiriteki eikyo keisoku gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-03-01

    Targets of the total development is to develop technology to non-invasively/simply measure changes in physiological function for physical and mental stimuli and to develop a human sense measuring technology needed to realize 'comfortableness.' As a part of it, the following R and D were conducted in this fiscal year. As to the R and D of skin impedance measuring, measuring methods such as the conducting method and potential method were studied. Further, an experiment with a person to be tested was conducted using the experiment use electrode. And detected were skin impedance changes caused by mental strain stress which were distinguished from changes caused by external environment. As the blink reflection measuring method, the paper took up the eyelid micro-vibration method under consideration and verified effectiveness of the method. The data were acquired using the same person as tested in the above-mentioned experiment when he is not tired, and the extraction of parameters of blink reflection which change according to working loads was studied. As to the continued blood pressure measuring technology, a measuring method which gives no loads on the person tested was studied, and the measuring portion where stable output can be obtained was selected. In addition, small/lightweight continued blood pressure measuring instrument which can be used in daily life was trially manufactured and designed. (NEDO)

  19. Report on achievements in fiscal 1998. Research on acceleration of improving the base for biological resource information, and development of a technology to measure gene information (development of the DNA measuring technology using bead arrays); 1998 nendo seibutsu shigen joho kiban seibi kasokuka kenkyu idenshi joho no keisoku gijutsu no kaihatsu seika hokokusho. Bizu array wo mochiita DNA keisoku gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    It is necessary in the field of post-genoms to know statistical correlation between DNA orientation information and clinical data, which helped growth of DNA probe arrays (DNA chips). However, it is difficult in patent point of view to develop chips in Japan. On the other hand, a movement has begun to use beads fixed with DNA probes in place of DNA chips demarcated on the surface of solids. This is a method to investigate hybridized DNA by means of fluorescent detection, in which each bead retaining the DNA probes is colored to make identification of the retained probes possible, and hybridizing reaction is performed in aqueous solution. Hitachi has developed a DNA measuring technology using bead arrays. The bead array has probe fixing beads of about 100 {mu} m laid sequentially inside a capillary, wherein the array can be used to inspect a large number of genes. Thus, this method can be a DNA measuring technology which is inexpensive, and high in reproducibility. These features lead to a belief that the technology is suitable for gene inspection devices used in the process of medicine development and at the clinical sites. (NEDO)

  20. Fiscal 1997 research report on the R and D project under a consignment from NEDO. Photonics engineering (R and D of photonics measuring/processing technology); 1997 nendo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Photon keisoku kako gijutsu (photon keisoku kako gijutsu no kenkyu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Survey was made on the trend of R and D on photonics engineering to clarify the direction of its impact and ripple effect on industrial fields. Reduction of environment burden, improvement of the productivity and reliability of products, and creation of new industries by novel creative R and D are necessary simultaneously. For reconsideration of the previous measurement and machining technologies in a manufacturing industry, use of photon (laser) beams is promising. As photonics engineering, photonics measurement and machining, and elemental and peripheral technologies for generation and control of photon were surveyed. Photonics application technologies for medical care and diagnosis, communication and transmission, entertainment, and chemical fields were also surveyed. In fiscal 1997 as the first year of this project, based on the results obtained in leading researches conducted until fiscal 1996, some technological issues were clarified through the survey on the latest trend of photonics engineering in measurement, machining and generation fields, and its feasibility in the other fields. 265 refs., 91 figs., 10 tabs.

  1. Report on the results of the fiscal 1997 R and D under consignment from NEDO of photon measuring/processing technology (R and D of petroleum production system high-grade measuring/processing technology); 1997 nendo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku photon keisoku kako gijutsu (sekiyu seisan system kodo keisoku kako gijutsu kenkyu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The R and D were conducted of high-strength and high-accuracy welding/joining technology using laser, technology to measure and assess the joining state of structures and defects around the surface of structures and inside structures by high accuracy and high resolution, and technology/equipment to generate a laser light source for the tool, which are all required to remarkably enhance safety/reliability of oil drilling facilities working in the severe environment. In fiscal 1997, as the R and D of oil production system high-grade measuring/processing technology, technical study, study of measures to be taken, operating experiment, assessment, examination, etc. were conducted on the following themes: 1) macroscopic processing technology (R and D of high-reliability laser welding technology), 2) non-destructive composition measuring technology (R and D of internal measurement and photoelectron spectroscopy using short-wavelength radiation), 3) tight-focusing all-solid-state laser technology (R and D of fiber laser), 4) tight-focusing all-solid-state laser technology (R and D of high-efficiency laser diode), and 5) comprehensive investigation of phonics engineering (investigation for photon-applied materials processing technology). 256 refs., 205 figs., 18 tabs.

  2. Achievement report for fiscal 1998. Photon-aided measuring and processing technologies (Research and development of advanced measuring and processing technologies for oil production system); 1998 nendo foton keisoku kako gijutsu seika hokokusho. Sekiyu seisan system kodo keisoku kako gijutsu kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Research and development was conducted of photon-aided measuring and processing technologies and of the technology of generating photons, all these usable in oil digging. In the research and development of high-reliability laser welding technology, it was found that reflection from the keyhole served as an indicator betraying instability if any in laser welding, and this enabled the establishment of a method for observing defects in welded sections. In the research and development of technologies for measuring internal transmission of short-wavelength radiation and for photoelectron spectroscopy, a high-efficiency continuous generation of hard X-rays was noticed in the former while, in the latter, the soft X-ray source in a light source was evaluated. In addition, a photoelectron flight tube was fabricated, and evaluated. In the research and development of fiber laser, a fiber structure type was decided to be used, and fiber laser was successfully oscillated for the first time in the world. In the research and development of high-performance laser diodes, a laser diode device was fabricated as the first step in this effort. A discussion was made about a high-efficiency combination of heat sink materials, lamination and assembly system, and fibers, which was for achieving higher performance. (NEDO)

  3. FY 2000 report on the results of the research and development project for the photon-aided instrumentation and processing technologies. R and D of the photon-aided instrumentation and processing technologies; 2000 nendo photon keisoku kako gijutsu seika hokokusho. Photon keisoku kako gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Described herein are the FY 2000 results of development of the photon-aided instrumentation and processing technologies. The technological and R and D trends of the photon-aided instrumentation and processing technologies are surveyed, in order to clarify the directions of their impacts and ripple effects on creation of new industries and development of the existing industries. The survey committee is organized, for exchanging opinions and information, and collection of information. For the trends of the photon-aided processing technologies, information on the elementary and peripheral technologies is collected by literature survey and academic meetings for processing, applied instrumentation and analysis, and photon generation/controlling, to grasp, analyze and study the latest trends. For the photon-utilizing technologies, information is collected viewed from their application to wide industrial areas, e.g., medical, diagnostic, communication/transmission, multimedia and chemical areas, other than those for instrumentation and processing. Also surveyed and analyzed/studied are the technologies for environmental protection, sensing, information, and the new areas, e.g., terahertz photonics and agriculture. (NEDO)

  4. FY 1999 Report on research and development results of photon-applied instrumentation/processing technologies. Research and development of advanced measuring/processing technologies for oil production systems; 1999 nendo foton keisoku kako gijutsu seika hokokusho. Sekiyu seisan system kodo keisoku kako gijutsu kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Described herein are the FY 1999 results of the research and development of photon (laser) beam utilization as part of the R and D project of the advanced measuring/processing technologies for oil production systems. For the high-reliability laser welding technology, the tests are conducted for welding 15 mm thick steel plates and 5 mm thick aluminum alloy plates by synthesized iodine/YAG laser beams, producing high-quality welding results. For the microscopic processing technology, attempts have been made for development of quantum functional optoelectronic devices which have nanometer-sized ultrafine dots. For the non-destructive composition measuring technology, the internal transmission measurement program produces the target light quantity by increasing brightness of the short-wavelength light source. The three-dimensional digital tomography (DT) images with a space resolution of several micrometers are obtained. For the tightly-focusing all-solid-state laser technology, a fiber-structured fiber laser is developed, on a trial basis, to attain a power of 15 W. A high-power, high-brightness laser diode, required for exciting the fiber laser is developed, and a power of 30 W or more is obtained by an InGa(As)P device. The comprehensive investigation results are also presented. (NEDO)

  5. FY 1991 report on the results of the contract R and D of the human sense measuring application technology. Volume 2. R and D of the physiological effect measuring technology (Part 1); 1991 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu itaku kenkyu seika hokokusho. 2. Seiriteki eikyo keisoku gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-03-01

    Targets of the total development is to develop technology to non-invasively/simply measure changes in physiological function for physical and mental stimuli and to develop a human sense measuring technology needed to realize 'comfortableness.' As a part of it, the following R and D were conducted in this fiscal year. As to the R and D of skin impedance measuring, measuring methods such as the conducting method and potential method were studied. Further, an experiment with a person to be tested was conducted using the experiment use electrode. And detected were skin impedance changes caused by mental strain stress which were distinguished from changes caused by external environment. As the blink reflection measuring method, the paper took up the eyelid micro-vibration method under consideration and verified effectiveness of the method. The data were acquired using the same person as tested in the above-mentioned experiment when he is not tired, and the extraction of parameters of blink reflection which change according to working loads was studied. As to the continued blood pressure measuring technology, a measuring method which gives no loads on the person tested was studied, and the measuring portion where stable output can be obtained was selected. In addition, small/lightweight continued blood pressure measuring instrument which can be used in daily life was trially manufactured and designed. (NEDO)

  6. Report on achievements of research and development of a technology to apply human senses to measurements in fiscal 1993. 2. Research and development of physiological effect measuring technology (Part 1); 1993 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu. 2. Seiriteki eikyo keisoku gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    Development in fiscal 1993 of a composite physiological function measurement method to measure stresses included the development of a watch type device using the tri-electrode double-point simultaneous measuring method for skin impedance, and a device placed around a head as a blinking meter using the simplified potential method. Both were reduced largely in size and weight. They were verified to have good performance by the measurement performance experiments. For noncontact skin temperature measurement, a noncontact temperature measuring system will be developed that automatically tracks movement of the head of a human body which moves within a limited area, and continuously measure temperatures of specific positions with measurement resolution of 0.2 degree C. Image processing utilizing sensor fusion of infrared and visible images was used to have extracted successfully persons under the natural background. A technology was developed to recognize specific portions of a face (eyes and eyebrows). Developments were made on an algorithm to measure directions of a head, and an attitude controlling and measuring system using a magnetic sensor. In measuring stress index materials, a prospect was obtained to realize semi-macro measurement by collecting cortisol and catecholamine from saliva. Discussions were also given on detecting catecholamine in urine by using high-speed liquid chromatography. (NEDO)

  7. FY 1991 report on the results of the contract R and D of the human sense measuring application technology. 2. R and D of the physiological effect measuring technology (2); 1991 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu seika hokokusho. 2. Seiriteki eikyo keisoku gijutsu no kenkyu kaihatsu (2)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1982-03-01

    In this paper, the following were studied: (1) easy-wearing net-type brain wave sensor and multi-purpose telemeter; (2) multi-point brain wave measurement. In this fiscal year, the fundamental design and evaluation of these were conducted. In (1), conducted were the study of specifications of system and shape as fundamental design of easy-wearing net-type brain wave sensor, and the evaluation using functional works. As fundamental design of multi-purpose telemeter, studied were the detailed specifications of transmitter and receiver and the system design. In (2), as fundamental design of multi-point brain wave sensor (64 electrodes), conducted were the specifications of system and shape of 19 electrode sensors and the evaluation using functional works trially made. As fundamental design of the analyzer interface, a system was studied for taking brain wave signals of 64 channels into the analyzer by analog/digital conversion. As to the interpolation system of topography, the following were carried out: study of the optimum interpolation system for estimating the electric potential at the portion where the electrode is not installed, based on the electric potential at the portion where 64 brain wave electrodes are installed; and evaluation of the interpolation system using topography by 12-21 electrodes as the pre-stage of 64 electrodes. (NEDO)

  8. Report on achievements of research and development of a technology to apply human senses to measurements in fiscal 1993. 2. Research and development of physiological effect measuring technology (Part 2); 1993 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu. 2. Seiriteki eikyo keisoku gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    The high-sensitivity brain wave measuring device has been given improvements in the simplified device net type brain wave sensor that has been improved in fiscal 1993, eliminating the steamy feeling in the head, giving better fitting feeling, and having cleared the target. The multiple application telemeter had the stability enhanced, making it possible to measure living organism signals such as electromyogram, electrocardiogram, eyeball movements, and respiration. To measure living organism activity and rhythm, development was made on a method to evaluate these subjects by using substitution characteristics with development of a portable monitor kept in mind. Measurement and evaluation methods were prepared on the living organism activity from the comparison of the autonomic nervous system activity derived from continuous measurement of pulse cycles with the change in spectra in the {alpha} brain wave. An intestinum rectum temperature correction filter using the number of pulses was fabricated to introduce a body temperature rhythm curve excluded of effects of the body activity. The living organism activity was evaluated comprehensively from the contrast between the daily activity variation and the circadian rhythm. Improvement of accuracy of the tympanum temperature sensor was also discussed. In developing the accelerated pulse meter, the size of the transmitter was reduced, a filter was developed to reduce obstruction signals contained in the signals, and development was begun on a personal computer based system. (NEDO)

  9. Report on achievements of research and development of a technology to apply human senses to measurements in fiscal 1992. 2. Research and development of a physiological effect measuring technology (Part 2); 1992 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu. 2. Seiriteki eikyo keisoku gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-03-01

    This paper describes the physiological effect measuring technology, extracted from the achievements in the development of a technology to apply human senses to measurements in fiscal 1992. Primary prototype fabrication and evaluation were given on an easy-to-mount high-sensitivity brain wave measuring instrument. The multiple application telemeter has come close to completion excepting the integration. For multi-point brain wave measurement, analyzing device interface was completed. In measuring living organism activity and rhythm, development was made on an evaluation method that uses substituting characteristics, with a portable monitor kept in mind. The activity generated by power spectrum change in the {alpha} brain wave was compared with that in the autonomic nervous system to derive the mutual relationship therein, whereas usefulness of the pulse cycle characteristics was verified. Development was made on a method to measure and analyze the tympanum temperature rhythm that corresponds to the intestinum rectum rhythm, and the tympanum temperature was measured discretely by using an infrared sensor. Verification was given on the correlation between the circadian rhythm derived from the intestinum rectum temperature and that derived from the discrete measurement. In developing a nonrestraind accelerated pulse meter, a transmitter of the small accelerated pulse meter that can measure pulses under non-invasive and nonrestraint condition was fabricated on a trial basis, whose easiness of mounting and possibility of signal transmission were demonstrated. (NEDO)

  10. FY 1999 report on the results of the research and development project for the photon-aided instrumentation and processing technologies. R and D of the photon-aided instrumentation and processing technologies; 1999 nendo photon keisoku kako gijutsu seika hokokusho. Photon keisoku kako gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Described herein are the FY 1999 results of development of the photon-aided instrumentation and processing technologies. The photon technologies will be widely applicable to various industrial areas, e.g., medical, diagnostic, communication, transmission and chemical areas, in addition to instrumentation and processing, and the FY 1999 project is directed to the survey and analysis of the information, and prediction of their effects. The high-sensitivity light-receiving elements enlarged up to 5mm diameter (effective area) are developed, based on the technologies to grow the thin films using an MOVPE (metal-organic vapor-phase epitaxy) device and the results of development of the infrared ray-receiving InGaAs photodiode sensitive in a 2.5 to 2.7{mu}m wavelength range. The surface roughness of 0.4nmRMS is achieved by the bowl feed liquid polishing method, to develop the processing technologies for high-precision substrates for optical mirrors. The results are used to develop the prototype X-ray mirrors with surface accuracy of {lambda}/10 to {lambda}/20 and roughness of 0.3 to 0.5nmRMS. In the development of the technologies for the light sources which can sufficiently supply photons for exciting semiconductor lasers, the technologies are developed to efficiently converge the laser beams. Also developed are the apparatus which can converge the beams to a diameter of around 0.6mm, and the apparatus which uses optical fibers to evaluate the beam diameter. (NEDO)

  11. Feasibility survey of the environmentally-friendly coal utilization system. Feasibility survey of the environmentally-friendly coal utilization system in the Philippines; Kankyo chowagata sekitan riyo system kanosei chosa. Philippines ni okeru kankyo chowagata sekitan riyo system kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    With relation to the coal of the Philippines, where the expansion of the use of coal as a substitute for petroleum/plant fuel is aimed at, the paper grasped the situation of coal production/development, the trend of coal import and domestic distribution, the coal utilization trend, and environmental problems, and analyzed the situation of coal utilization/spread by industry including the commercial/residential use. The purpose of the survey is to draw up a master plan for the introduction of the environmentally-friendly coal utilization system. As to the use of environmentally-friendly coal technology which should be adopted to the coal mining industry and commercial/residential sector, cited are the introduction of coal preparation technology and power transmission technology, and the development/spread of briquette as a firewood substituting fuel. In the electric power sector, the problem is the treatment of ash after combustion and the effective use. Relating to the treatment of flue gas, there is no installation at all of desulfurization facilities and denitrification facilities. In the cement industry sector, they wish to return fuel from heavy oil to coal. For it, it is necessary to study dust preventive measures. In the other sectors, coal hasn`t been used very much. An increase in coal demand is not expected also in the future, and big problems concerning coal haven`t occurred. 42 figs., 64 tabs.

  12. Report on the survey in fiscal 1998. Systematic arrangement of environment technologies. 5 (Application of advanced technologies to environmental measures); 1998 nendo chosa hokokusho. Kankyo gijutsu ni kansuru taikeiteki seiri. 5 (sentan gijutsu no kankyo taisaku eno oyo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Global environment handling technologies were investigated and put into order. Universities often make research and development on themes that can be handled at laboratory levels or by simulations. Development at a practical application level is few. Technological seeds may include manufacture of hydrogen by water and steam decomposition using solar energy, and new synthesizing reactions utilizing solar energy. Included may also be urban type wind power generation, superconductive energy storage systems, biomass utilization, and natural energy utilization. Furthermore, CO2 recovery and utilization by liquefaction, alkaline metal heat power generation, and pulse power technologies can also be found. Studies on applying advanced technologies to environmental measures include composite materials, membrane separation, photo-catalysts, optical elements, porous bodies, functional polymers, bio-reactors, electron beams, and aeration. Private corporations are working noticeably on prevention of fluorocarbon and dioxin emission, PCB treatment and waste water treatment technologies, catalyst application technologies, recycling technologies, and incineration ash treatment and utilization technologies. (NEDO)

  13. Survey on research environment for young researchers in the U.S.. What attractive environment is for young researchers; Beikoku ni okeru wakate kenkyusha no kenkyu kankyo ni kansuru chosa. Wakate kenkyusha ni totte miryokutekina kankyo towa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-28

    A survey was conducted on 'what attractive research environment is for young researchers' as a theme. The young researchers are referred to as those who are registered on a master's or doctor's degree courses and what is called postdoctoral scholars who received a doctor's degree. In the survey, a few common comments were seen in over interviews on the U.S. research environment. The comments were such that, needless to say, subsidies are indispensable for researches but economic aspects of treatment are not necessarily satisfactory, that the research environment is generally good, allowing freedom in research, and that results tend to be achieved by providing a subsidy for experienced knowledgeable researchers rather than directly subsidizing young researchers with a large sum, while programs with individuality such as a fellowship are desired more. It is apparent that the interests of postdoctoral scholars are economic stability; in fact, uneasiness and dissatisfaction in the status and the treatment are pointed out in a survey by the U.S. Science Academy. (NEDO)

  14. Feasibility survey of the environmentally-friendly coal utilization system. Feasibility survey of the environmentally-friendly coal utilization system in Indonesia; Kankyo chowagata sekitan riyo system kanosei chosa. Indonesia ni okeru kankyo chowagata sekitan riyo system kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    With relation to the coal of Indonesia, where the expansion of the use of coal as a substitute for petroleum/plant fuel is aimed at, the paper grasped the situation of coal production/distribution/utilization and environmental problems, and analyzed the situation of the coal utilization/spread by industry including the commercial/residential use. The purpose of the survey is to work out a comprehensive master plan including Japan`s international cooperation for introducing the environmentally-friendly coal utilization system to Indonesia. Coal utilization systems, the introduction of which Indonesia should study in future, were picked up, according to the surveys in fiscal 1993 and 1994. In commercial/residential and small-scale industry sectors, needed is improvement of carbonization technology for production of coal carbonization briquette. Moreover, the introduction of bio-briquette should be studied in the future. In the power generation sector, studies should be made on the introduction of technology for SOx/NOx reduction and technology for coal ash treatment including the effective use of coal ash. For the introduction of coal boilers, the combustion mixed with bagasse, which is abundant in amount, is also necessary. In the coal production sector, coal preparation technology is studied, and a method to select the optimum process was proposed through the simulation. 76 figs., 43 tabs.

  15. FY 1998 survey report on the feasibility study of environmental cooperation in environmental protection technology, system, etc. for spread to developing countries; 1998 nendo kankyo taisaku gijutsu seidonado no tojokoku fukyu ni kakawaru kankyo kyoryoku kanosei chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The paper arranged the present situation and the problems of environmental cooperation for developing countries, and studied based thereon how to cooperate in environmental protection for developing countries in the future. At the same time, it arranged the problems/subjects posed when environment-related companies in Japan try to transfer environmental technology to developing countries, for the purpose of using them as data in studying possibility of reviewing the environmental cooperation presently conducted. A view on environmental cooperation is that as security of mankind, it is necessary to help developing countries in technology/knowledge/fund. However, a trial calculation indicated that the initial investment of 11.1 trillion yen is needed only for desulfurization and water treatment in China and ASEAN countries. Such a huge amount of money cannot be paid at all even by developed countries. As the support of environmental protection measures, the one also including energy and resource is needed. Further, the support of environmental protection measures should be the one that has the exhibition effect and influential effect, promotes efforts of developing countries' own, and pushes independent environmental measures forward. From this point of view, a study was made on what the details of the environmental cooperation should be like. (NEDO)

  16. Result of comparative experiment on environmental comfort in room using hot heat environment testing unit. Onnetsu kankyo shiken unit ni yoru shitsunai kankyo no kaitekisa no hikaku jikken kekka ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Fujiwara, T; Kawashima, K [The Hokkaido Electric Power Co. Inc., Sapporo (Japan)

    1991-11-20

    Measurements were carried out on three buildings having different heat insulation, airtightness and heat capacity for testing the hot heast enviroments (having a room size of about 4.6 m{times}3.7m{times}2.3 m) as to the temperature differences between the upper and lower parts of the room and the MRT (mean radiation temperature, representing the temperature of radiation from the wall face). These are compared according to types of heating appliance. The result is summarize as follows: The temperature difference in the upper and lower parts is affected largely by the airtightness of the building, the difference being capable of getting reduced by rasing the airtightness even in a buildings low in heat insulation. In a building with low airtightness, type of heating appliance and its installation location affect the temperature difference. The MRT is determined determined nearly completely by the heat insulation of the wall face in a room, but it tends to be affected easily by the specification and area of windows. A floor heating system increases the MRT and generates very little difference in temperatures in the upper and lower parts of the room. A comparison using a PMV (one of the indexes for enviromental comfort in a room) was also conducted. 12 figs., 7tabs.

  17. New city model with environmental symbiosis and energy conservation; Kankyo kyosei sho energy wo mezashita shintoshi koso

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-01

    New city concept is studied from the viewpoints of city economy, environmental symbiosis, energy and resources, transportation, urban disaster prevention, information dissemination, etc. As the result, twelve cluster cities equipped with capabilities of state capital function and administrative business, commerce, interchange of people and goods, and recreational activities are dispersed and distributed to form a double ring, populated by 0.6 million and occupying 7000ha. In a simulation of the heat island phenomenon, the temperature is lowered by 0.2-0.3degC by the dispersion of city functions, and by 0.1-0.15degC by environmental symbiosis-related measures. Primary energy consumption is reduced by 17% by reduced demand for power and heat and energy saving of 15% is attained by recyclable energy utilization and enhanced-efficiency energy supply, all thanks to passive solar systems and higher-efficiency electric machines, photovoltaic power generation, heat pump-aided utilization of waste heat and environmental heat, electrothermal energy supply from the MCFC (molten carbonate fuel cell), etc. 64 refs., 56 figs., 25 tabs.

  18. Bio-remediation in actual use and environmental impairment liability insurance. Bio remediation no jissai to kankyo hoken

    Energy Technology Data Exchange (ETDEWEB)

    Ooka, K [AIU Insurance Company, Tokyo (Japan)

    1993-08-01

    This paper introduces the American International Group (AIG) which makes conceptions and risks of bio-remediation its business, as to how the Group is really working on the business. Features of the continuing remediation involving corporations managed by AIG include the following: It has economical superiority; in-situ purification of contaminated soils is possible; and it can solve contamination issues in a short time, and makes reuse of lands possible. The remediation uses a principle of promoting the contamination purifying actions of the natural world. It activates microorganisms by supplying oxygen, water, and nutrients in suitable amounts for microbial activities to decompose chemical wastes and converts them into harmless substances such as CO2. Objects of purification include petroleum-based substances, herbicides, insecticides, and solvents. Establishing optimal parameters before purification (mediator variables and population parameters) and protocols is important. The system goes through the following steps: Hydraulic and geological experts identify patterns and levels of contamination; microorganism experts find optimal parameters in laboratories; engineers design treatment systems; and site technicians operate the system. 6 refs., 3 figs.

  19. Survey on bio-chemical complex harmonized with global environment. 3; Kankyo chowagata seibutsu kagaku konbinato ni kansuru chosa. 3

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    A survey was conducted of bio-chemical complex harmonized with the global environment for the purpose of constructing the material production process harmonized with the environment by the process fusion between biological conversion and chemical reaction. Palm oil was taken up as renewable raw material plant resource. The process utilizing bio-chemical reaction advances at normal temperature and pressure and is high in reaction specificity and selectivity. This is a recycling, circulation and environmental harmony type production technology which brings high yield, energy conservation, resource conservation, and low environmental loads. Waste water treatment and production of useful substances from sludge were thought as elementary technology. A possibility was studied of enzyme production by culturing solid waste, and the enzyme was applied to the hydrolysis process. The paper indicated trace components in the palm oil and the extraction method and proposed the production process of new derivatives for adding value to hydrolysate. A study was also made of the overall process flow which integrated these new processes and the material balance. The comprehensive evaluation of this new process was made from the aspect of the product structure, the market, construction cost, economical efficiency, and the environment. 133 refs., 65 figs., 56 tabs.

  20. Environmental control by biotechnology and ecotechnology, construction of ecopolis. Seibutsu kogaku-seitai kogaku to kankyo joka, Ecopolis no soshutsu

    Energy Technology Data Exchange (ETDEWEB)

    Mori, T [Shimane Univ., Shimane (Japan). Faculty of Agriculture

    1992-09-01

    The relationship between environmental control and biotechnology is discussed, and purification of moats and lakes is taken up as a concrete example of introducing biological waste water treatment technology to ecotechnology. In addition, an overall waste disposal system connecting cities and agricultural districts is investigated. After the purification of water and waste problem solution, etc. are discussed, the importance of creating ecopolis and ecotown is described. The 3 concepts of microbial ecotechnology (high densification of organism, field control, interaction between organisms) are used to explain biological treatment technology. Attempts for direct purification and ecotechnology are described quoting a few examples. If waste produced in cities and ligneous materials or charcoal obtained from forests are mixed for treatment, effective waste treatment or new resources production may be possible. It seems to be possible to create ideal ecopolis and ecotown by applying the doctrine of irrigation, drainage and reclamation engineering and the technology established by now. 35 refs., 1 fig., 2 tabs.

  1. Research of fragranced air, environmental aroma, to human and its application. Kankyo hoko no koka to sono oyo

    Energy Technology Data Exchange (ETDEWEB)

    Hashimoto, S. (Shimizu Construction Co. Ltd., Tokyo (Japan))

    1991-06-01

    The effect of lemon, jasmine and lavender aroma on people was studied through environmental aroma experiments by 270 subjects in a meeting room for two months. As a result, the high percentage of positive responses was obtained on the sense of air cleanliness and efficiency of meetings, and a statistical significance was, in particular, obtained in the case of lemon as smoking was permitted. It was suggested that aroma had physiological and phychological effect even under conditions where the subjects were not necessarily aware of aroma. The effect of the same three aromas was also studied through experiments by 13 subjects in a VDT room for one month. As a result, the number of keypunch errors decreased in every aroma although punching speeds decreased slightly, and lemon showed a significant difference among three aromas. Based on these experimental results, the aroma generator was developed, and more than 30 environmental aroma systems combined with air conditioning ducts have been installed in Japan. 20 refs., 5 figs., 6 tabs.

  2. Report on the environmental safety evaluation sub-committee in fiscal 1992; 1992 nendo kankyo anzensei hyoka bukai hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-03-01

    This paper reports the activities of the environmental safety evaluation sub-committee for the coal liquefaction plant in fiscal 1992. The sub-committee, upon having received reports on the result of environmental safety evaluation tests performed in fiscals 1991 and 1992 by NEDO, deliberated and discussed carefully the contents thereof. In order to ensure labor hygiene for coal liquefaction plant workers, health influence on liquefied oil users, and social acceptability of the liquefied oil, NEDO has performed the comprehensive brown coal pilot plant operation and oil safety tests. The tests are in accordance with the labor safety and hygiene law, the chemicals examination law, and the MPD issued by OECD, and performed on each fraction produced in the pilot plant and the whole fraction mixing the former fractions, using rats, rabbits, and guinea pigs. The test items included: acute inhalation toxicity and oral repeated administration (using rats); eye stimulation, repeated coating and skin stimulation (using rabbits); photo-toxicity (using guinea pigs); mutagenicity tests (microorganisms, bacteria and chromosome anomaly); resolution tests; fish toxicity; concentration degrees; algae growth obstruction; and water flea breeding obstruction. As the result, the toxicity was found light. (NEDO)

  3. To create and built urban environment for disaster mitigation; Saigai ni tsuyoii toshi kankyo no sozo no tameni

    Energy Technology Data Exchange (ETDEWEB)

    Murozaki, Masuteru [Kobe University, Kobe (Japan)

    1999-06-10

    Learning from disaster of the Hanshin{center_dot}Awaji Earthquake, the need for building disaster preventing town is explained. Scheme of is prevalent among the townspeople. Administrations also tend to think light of hardware, and they treate approaches lightly in which safety of hardwares of town structures is secured. There are basic questions such as learning cases of reconstruction in advanced cities, understanding that problem is in hardware rather than in software, and removing biases on disaster prevention. It is necessary that persons concerning construction give them positive solutions as problems of themselves. (NEDO)

  4. Use technologies of organic materials under various environmental conditions; Kankyo joken no tayosei to yuki zairyo??????250KKGKA4

    Energy Technology Data Exchange (ETDEWEB)

    Ikeda, s. [Ajinomoto Co. Inc., Tokyo (Japan)

    1996-06-05

    This paper describes use technologies of organic materials for selecting them under various environmental conditions. FRP is superior in mechanical strength and chemical resistance, and suitable as anticorrosion structural materials. Its chemical resistance is dependent on matrix resins. Simple polyolefine system resin is superior in chemical resistance and cost, however, because of its poor mechanical strength, it is mainly used for small parts. The composite structure is used for middle tanks or piping materials where the inside surface contacting solution is lined with chemical resistant resins such as PP and PVC, while the outside surface is reinforced with FRP. Various lining materials and lining methods are used. The following materials are used for lining: liquid resin type one such as tar epoxy resin, melting powder type one such as PE, PP and fluororesin, laminated glass fiber type one using cold setting polyester and thermosetting phenol resin, compound type one of scale-like glass flake and resin, and rubber or plastic sheet material. It is important to select optimum material for lining. 1 fig., 2 tabs.

  5. Bio-technology drawing attention for solution of environmental problems. Kankyo mondai kaiketsu demo chumokusareru bio technology

    Energy Technology Data Exchange (ETDEWEB)

    Shimazaki, A [Bank of Tokyo, Tokyo (Japan)

    1991-06-01

    Explanations are given on the recent movements in the bio-technology applications. In the United States, gene therapy has been applied to patients having damaged immune system, while in Japan the first outdoor experiment is about to begin this year on gene recombined tomatoes. In the area of the marine bio-technology, researches carried out by the industrial, governmental, and academic sectors combined, led by the Ministry of International Trade and Industry have begun, which include such an attractive subject as finding out new kinds of algae living on carbon dioxide as their special favorite diet to use them to prevent the earth warming-up. On the other hand, the difficulty of bio-business is represented by the fact that venture business groups are absorbed into larger chemical companies. In Japan, the bio-business established in individual regions related to soy bean paste and Shoyu sauce industry is a distinct feature. Deregulations and review on the patent system are in progress in the United States and Germany aiming at strengthening the business competitiveness. Expectation is placed on the bio-technology that it will contribute largely in the future to solving such a critical environmental problem as experienced in the Persian Gulf war. 1 tab.

  6. Preparation for environment of residences. Residence and information facilities; Sumai no kankyo zukuri. Sumai to joho setsubi

    Energy Technology Data Exchange (ETDEWEB)

    Nanjo, K. [Mitsubishi Electric Corp., Tokyo (Japan)

    1994-09-05

    Taking up the home automation (HA) as the information facility of residence, business and technical trend of HA system together with its present and future condition are described. The service functions of HA system used for multiple dwelling houses are home telephone function, security function, control function and visual communication function. Besides, development concept of dormitory control system and service functions which are attractive to people like owner, manager and residents are described. As for its trend in foreign countries, though in France HA system under government guidance was applied in the 1980`s, it was not successful and market related to HA system was held in check. Since 1990`s, due to government policy for its introduction, this system is getting popular in the residences of disabled person, advanced age person and so forth. As for the development of HA system, more improvement not only indoor the home but also comfort, safety and so forth linking to the outdoor system is necessary. 6 figs.

  7. Development of environmentally friendly universal controller. Data and materials; 1998 nendo kankyo taio universal controller no kaihatsu seika hokokusho. Shiryohen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    Research and development was carried out for an 'environmentally friendly universal controller (UC)' which would be 'user-friendly and energy-saving' when used with electrical home appliances, and data and materials on them were compiled into this volume. It covers the specifications (Versions 0.6 and 0.51) of a newly developed two-way controller protocol, the specification (Version 0.1) of two-way remote control IrDA-C communication unit hardware, an infrared communication protocol IrDa Control, and the like. It also accommodates information collected through surveys of technological trends as reflected in technical literature, Internet home pages, catalogs, and the like, concerning the user-friendliness of electrical home appliances, remote control, domestic consumption of electric power, and the like. Also covered is the result of surveys of patents involving environmentally friendly UC related technologies, namely, Japanese patents (from applications made in 1979 through disclosures made in 1998) and U.S. patents (registrations made in 1982 and thereafter). Furthermore, it contains the result of surveys of actualities of domestic use conducted for the purpose of clarifying the effect of environmentally friendly UC introduction, how such UCs are being accepted by the public, and the conditions that should be satisfied for their popularization. (NEDO)

  8. Workshop on APEC virtual center for environmental technology exchange; APEC kankyo gijutsu koryu virtual center workshop hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    At the 'policy maker workshop of the virtual center of APEC technology exchange' held in November 1997 in Osaka, Japan, it was agreed to organize study groups to discuss the scope of information provided by the virtual center, and to make common the classification systems and retrieval functions. In addition, the necessity was confirmed on international cooperation to promote establishment of virtual centers in different countries and territories. On the first day, Professor Ueda at the Kyoto University gave the basic lecture entitled 'global environment preservation and environmental technology transfer: problems and prospects'. Mr. Dan, the workshop manager gave the basic proposal entitled 'the future directionality of environmental technology exchange inside the APEC territories by using Internet'. Based on the basic proposal made on the first day, reports and discussions were given in the following sessions, where confirmation was made on the future directions. S1: establishment of the virtual centers in other countries and territories; S2: assurance of interchangeability of classification systems and retrieval functions in providing information, and S3: presentation of examples of inter-territorial exchange and the future directionality. (NEDO)

  9. Research on environmental bioecosensing technology using ecological information; Seitaikei joho ni yoru kankyo bio eco sensing gijutsu ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The bioecosensing technology was studied which detects and identifies feeble signals generated by biosystem communication in wide biological environment. The following were reported as current notable environmental biosensing technologies: a quick measurement method of environmental contaminants using immunological measurement method, analysis method of ecological state of microorganism using DNA probes, observation of ecosystem by bioluminescent system, measurement method of environmental changes and contaminants using higher animals and plants, and detection method of chemical contaminants using chemotaxis of microorganism. As a result, the new bioecosensing/monitoring technology in molecular level was suggested for identifying comprehensive environmental changes which could not be measured by previous physical and chemical methods, as changes in ecosystem corresponding to environmental changes. As the wide area remote sensing technology of environmental ecological information, sensing technology on the earth, aircraft and satellite was also discussed. 247 refs., 55 figs., 17 tabs.

  10. Report on the environmental safety evaluation sub-committee meetings in fiscal 1987; 1987 nendo kankyo anzensei hyoka bukai hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1988-03-01

    The environmental safety evaluation sub-committee has held two meeting in the current fiscal year as described below. The first sub-committee meeting (August 25, 1987) was held for the agenda of the summary of future test plans, the result of overseas surveys in fiscal 1986, the results of tests in fiscal 1986, and the summary of the test plan for fiscal 1987. The major agendum of the second sub-committee meeting (February 23) was the interim reports on the overseas survey results and the safety tests in fiscal 1987. NEDO intends to ensure the labor hygiene for workers in coal liquefying plants, the effect of liquefied oil on users' health, and social acceptability of liquefied oil. Therefore, a safety test for liquefied oil in the primary hydrogenation process was performed provisionally on brown coal PP in the initial stage of operation, in addition to bituminous coal liquefied oil at the existing 1-t/d PDU. The main contents of the test performed by NEDO are based on the labor safety and hygiene law and the law related to regulation on the deliberation and manufacture of chemical materials. Different tests using guinea pigs were carried out on the total fraction mixed at the 1-t/d PDU, and each fraction of light and heavy oils, where the liquefied oil was verified to have minor degree of toxicity. (NEDO)

  11. Fiscal 1995 geothermal development promotion survey. Natural environment survey report; 1995 nendo chinetsu kaihatsu sokushin chosa. Shizen kankyo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    In Candidate C area for the geothermal development survey, the natural environment was surveyed and `the secondary landscape assessment` was summed up in which places proposed for drilling of large-size wells and for construction of power generation facilities are extracted and a simulation of the landscape is conducted. The area for survey is the Shiramizu-gawa region in the south of Lake Akan, Akan-cho, Akan-gun, Hokkaido. The field survey was carried out about three items of landscape, plants and animals during the June-November period, 1995. As to the flora, diverse florae including vegetation unique to alpine areas, wetlands, and fumarole surrounding areas were found in the region, which is covered with summer-green broad-leaved forests or mixed forests of coniferous and broad-leaved trees. As to the fauna, faunae inhabitant of the highly natural forests were found including black woodpeckers and mountain hawk eagles. As a result of studying the places proposed for geothermal development from the above-mentioned survey, two places were picked up in the west of the survey area, where geothermal development is comparatively less influential in the natural environment and landscape and there is a high locational adaptability. 19 refs., 56 figs., 49 tabs.

  12. Resources, environment and solid waste management; Shigen {center{underscore}dot} kankyo mondai to haikibutsu shori no tenkai

    Energy Technology Data Exchange (ETDEWEB)

    Takeda, Nobuo [Kyoto University, Kyoto (Japan). Department of Environmental Engineering

    1999-09-20

    Solid waste management should be considered in close relation to conservation of energy and resources. The history and situation of solid waste management in Japan is outlined and the new concept of waste management is discussed for sustainable development. (author)

  13. Workshop on APEC virtual center for environmental technology exchange; APEC kankyo gijutsu koryu virtual center workshop hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    At the 'policy maker workshop of the virtual center of APEC technology exchange' held in November 1997 in Osaka, Japan, it was agreed to organize study groups to discuss the scope of information provided by the virtual center, and to make common the classification systems and retrieval functions. In addition, the necessity was confirmed on international cooperation to promote establishment of virtual centers in different countries and territories. On the first day, Professor Ueda at the Kyoto University gave the basic lecture entitled 'global environment preservation and environmental technology transfer: problems and prospects'. Mr. Dan, the workshop manager gave the basic proposal entitled 'the future directionality of environmental technology exchange inside the APEC territories by using Internet'. Based on the basic proposal made on the first day, reports and discussions were given in the following sessions, where confirmation was made on the future directions. S1: establishment of the virtual centers in other countries and territories; S2: assurance of interchangeability of classification systems and retrieval functions in providing information, and S3: presentation of examples of inter-territorial exchange and the future directionality. (NEDO)

  14. Role of civil technology towards environmental conservation and creation; Kankyo hozen/sozo eno doboku gijutsu no yakuwari

    Energy Technology Data Exchange (ETDEWEB)

    Kato, T. [Maeda Corp., Tokyo (Japan)

    1995-01-15

    The recent circumstances domestic and abroads around `environment` are showing a kaleidoscopic movement with the Earth Summit in 1993 as a turning point, such as the materialization of the Environmental Fundamental Law, enactment of environmental policy fundamental principle by the Ministry of Construction, and furthermore and adoption of the earth environmental action plan-agenda 21-by the Japan Society of Civil Engineers. Under the circumstances like this the civil work execution study committee has planned this panel discussion for study, for a purpose of catching hold of the environmental problem from a standpoint of the actual constructor and furthermore searching for what should be done. As a consequence, the various opinions have been presented as follows: Namely, in order to grapple with the environmental problems it is required for that a co-operation work of the civil engineers should be done with the people in the other field. As for the environmental problems, a discussion forecasted for the future is necessary. Because an environment itself is fuzzy matter, it would be better not to give the too clear solution for a concept. An attitude to make much of the matter which can not be counted is needed. The mitigation (influence alleviation countermeasure) is required for applying flexibly.

  15. Realization of an accelerator for environmental refreshment in case of soil; Fukyugata kasokuki ni yoru kankyo sosei eno koka

    Energy Technology Data Exchange (ETDEWEB)

    Isogai, H [Electrotechnical Laboratory, Tsukuba (Japan)

    1997-11-25

    Learning from a history of the earth of ancient times, the paper studies effects of refreshing environment and soil or making them natural and harmless mostly using primitive bacteria, and develops element technology which is industrially accelerating. The spread type accelerator working only by solar energy was installed and operated for experiment. As indices of refreshment effects, a study was comparatively made between a sugar degree of sweet potato and a yield shown in the number of potatotimesunit weight. An EM propagation garbage layer is formed, and the two sections were installed of a site of the actual installation of the spread type accelerator and a site naturally left alone. Other effects of weather, temperature and humidity which are external factors and general fertilization are offset as common modes, and a consideration was so made that only refreshment effects of primitive bacteria can be relatively compared. Acceleration effects in using accelerator for growing sweet potato could be quantitatively confirmed. As to sugar degree, because the last study was made in the beginning of summer, the underground temperature was high enough. Even only EM effects were fully effective. This time, the weather was much colder, and it was found to be a must to use accelerator. 2 figs.

  16. Environmental improvement in drying process of plastics part paint; Jushi buhin toso kanso kotei no kankyo kaizen

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, T.; Horii, H.; Kobayashi, T.; Hayashida, T. [Hino Motors, Ltd., Tokyo (Japan)

    1998-07-01

    A method is developed of applying near infrared rays to the drying of paint coatings on resin-made automobile parts, and its environment improving effects are described. Using the conventional hot-air dryer for the drying of such coatings, the portion near the top surface is hardened prior to the other portions because the heat is absorbed near the top surface. Using an infrared drying system, however, defects in the product surface attributable to the lack of uniformity in the hardening of paint or to the splashing of solvent are remedied because deeper portions are hardened first. Experiment and study are conducted for the purpose of applying a near infrared drying method to an ABS (acrylonitrile butadiene styrene) coating. It is found that the near infrared drying method takes only seven minutes to dry a paint coating for which a hot-air furnace will take 20 minutes, thus shortening the drying time a great deal. Defects of gas hole of coatings are generally dealt with by changing the setting time and drying conditions for example by increasing the amount of the diluting thinner. When an near infrared drying method is used, the amount of the diluting thinner is reduced approximately 50% from the amount required using the hot-air drying method in case of the thickness of 60{mu}m. 2 refs., 9 figs., 2 tabs.

  17. Investigations on international standardization of environmental management systems. 3; Kankyo kanri system no kokusai hyojunka ni kansuru chosa. 3

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Japan as an ISO member country identifies the state of discussions in the environmental management standard deliberation committee at ISO. Investigations were performed on international standardization of environmental management systems for the purpose of participating and cooperating in preparing and establishing international standards related to environmental management, and playing part in working, solving and improving environmental problems. Under the circumstances that environmental problems are drawing worldwide interest, the International Organization for Standardization (ISO) has been carrying out since 1993 deliberations on environmental management standards to institutionalize environmental management rules to check effects of business activities on the environment. The International Organization for Standardization/Environmental Management Technical Committee (ISO/TC207) was installed, at which series number of 1400 order was allotted for environmental management related standards, and major standards have come to a final stage of standard formulation at the TC207 Oslo conference in June 1995. In Japan, the Ministry of International Trade and Industry has established an environmental management standard deliberation committee composed of people of experience or academic standing to advance discussions on how the environmental management should be in business entities through deliberations on ISO standards.

  18. Measuring approach for effect of refreshmental acceleration into the soil environment; Kankyo sosei kasoku koka no ikkeikeisoku apurochi

    Energy Technology Data Exchange (ETDEWEB)

    Isogai, H. [Electrotechnical Laboratorys, Tsukuba (Japan)

    1998-12-05

    This paper mainly describes to a measuring method for effect of refreshmental acceleration into the soil which were employing hamlet of micro organisms for accelerating revival or refreshment of environment especially purification of sludge in bottom of polluted ponds, lakes and grounds. (author)

  19. Project to promote exchange of international information on environmental technologies; Kankyo gijutsu kokusai joho koryu sokushin jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Mutual information exchange at international levels is important for practical application of global environment preservation technologies, whereas the APEC Virtual Center was established in fiscal 1997. Fiscal 1998 has discussed the future functions of the Virtual Center, and carried out the following matters to improve the functions and achieve its stable operation. Discussions were given on common use with the centers of other countries and regions of the specifications of classification systems for information areas and provided information that are provided by the Virtual Center. Visits were made to sub-managing countries and regions for smooth operation of the study groups, and opinions were exchanged. Visits were made to coordinators and contact points established in each country and region when the Center was founded in fiscal 1997. A visit was made to the U.S. Environmental Protection Agency to exchange opinions on coordination measures with the Cleaner Production Strategy of the U.S.A. being a project similar to the subject project. In order to strengthen the Japan's Center, attempts were made to expand the linking information to wider scope. Special pages publishing concentratedly the items of information that the users are interested were prepared as part of the information provision. (NEDO)

  20. Ecological processes for Environmental Impact Assessment in Coastal Waters; Engan no kankyo eikyo hyoka (EIA) eno seitaigakuteki apurochi

    Energy Technology Data Exchange (ETDEWEB)

    Ishikawa, Kimitoshi. [Environmental Assessment Dept., Tokyo (Japan)

    1999-03-25

    This paper focuses on a method for estimating adverse effects on natural environment by economic development in coastal waters in Japan. In particular, the most critical relations concerning the impact on marine organisms is pointed out and discussed according to an environmental impact assessment. Relations between environmental impact assessment and marine organisms needs a quantitative ecological approach in order to succeed in sustainable development of coastal waters management. Recently, the Environment Agency of Japan pointed out the unreliability and the theme on accuracy and the staff for biology and ecology in the environmental impact study. Ecological response to environmental impact occurs in a wide spectrum of physiological and biological and biological functions. Therefore biological monitoring measures must correspond to the given time-space scale of natural mechanisms. For the evaluation of environmental impact, it is desire able to develop of experimental technics and collect biological and ecological basic data for the object. I Reconstructing the following: 1. Reconstructing a clearlistic EIA process by EIA agencies and practitioners, 2. Scorping the biological and ecological issues by EIA professionals, 3. Using the current computer technology, 4. Considering monitoring systems over scales of time and space for the ecological target and 5. Making available to public all monitoring data and reports of EIA. (author)

  1. NEDO environmental technology subcommittee. 18th project report meeting; NEDO kankyo gijutsu bunkakai. Dai 18 kai jigyo hokokukai

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-09-01

    In relation with the 'recent trends of global warming problems and the outline of environmental technology development office activities,' Hiroshi Mitsukawa, a NEDO (New Energy and Industrial Technology Development Organization) director, delivers a report on Japan's policy toward the international commitments of the Kyoto session of the Conference of the Parties to the United Nations Framework Convention on Climate Change and NEDO's approach in this connection to new energy technology development. Furthermore, global environment-related industry technology research and development projects are explained, which involve environmentally friendly production technology, reduction in substances that cause environmental impacts, effective use of CO2 fixation, recycling of wastes, environment restoration technology, international relationship, and so forth. In relation with the 'promotion of global warming prevention projects by the environmental technology development office,' researches for the promotion of joint implementation, climate technology initiative, international joint projects for CO2 isolation in the ocean, and IEA (International Energy Agency) agreement on the research and development of technologies related to greenhouse gas, are explained. Concerning the development of eco-cement production technology utilizing urbane type general wastes, a verification research project on the manufacture of cement from incinerated urbane waste residue and sewage sludge is reported. (NEDO)

  2. Research and development of laser radar for environmental measurements. Pt. 3; Kankyo keisokuyo laser radar no kenkyu kaihatsu. 3

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Described herein are the results of the joint project between Japan and Indonesia to construct a new laser radar network system, which can three-dimensionally measure air pollution conditions in urban areas, in Djakarta. This joint project is implemented to elucidate the mechanisms involved in air pollution in the city, and thereby to contribute to environmental administration of Indonesia. This project is expected to give the basic approach to solution of environmental problems in urban areas, and eventually on a global scale, and hence to contribute to construction of the global network systems for environment-related information, which should be necessary in the near future. The (ODA Laser Radar Development Committee) is the deliberative body for the project, responsible for evaluating the project results. The project will be implemented on a 4-year plan from FY1993 to 1996. The activities in this year, the third year for the project, include on-the-spot survey, selection of the laser radar site, and development/improvement of the laser radar system. These results are described herein. (NEDO)

  3. Report on Asian Environment Information Network; 'Asia kankyo joho network' ni kansuru hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The goal is the construction of Asian Environment Information Network (AEInet) in accordance with a contract signed between Indonesia's LIPI (Indonesian Institute of Science) and NEDO under NEDO's Research Cooperation Project Concerning the Development of Environment Measuring Laser Radar (LR). The network is so designed and constituted as to operate on a private line between Indonesia and Japan via IP (Internet protocol) and to enable the exchange on the Internet network of the data collected/analyzed by the Indonesian LR system and of articles of e-mail between scientists of the two countries. The AEInet will be utilized for the collection/analysis of LR-collected data; exchange of observed data and the result of processing; provision of support to environment information scientists in exchanging e-mail and information; and the search of databases for the implementation of the project. In this paper, the outline and functions of the system, network system design, WWW server construction, network operating status, joint researches with Indonesia, etc., are described. (NEDO)

  4. Research and development of laser radar for environmental measurement. 2; Kankyo keisokuyo laser radar no kenkyu kaihatsu. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    This project was received by Optoelectronic Industry and Technology Development Association from NEDO, and aims to contribute to the improvement of Indonesia's environmental administration through the development of an air pollution observing laser radar (LR) and of an environmental information network system fit for use in the country in cooperation with Indonesian engineers. LRs will be installed at several sites in an urban area where environmental problems are increasingly serious, and a observation network system will be constructed to link the laser radar sites. The observed data will be collected, analyzed, and processed by an observation data processing center for the investigation of the three-dimensional spatial distribution of air pollution to determine the actual state of air pollution over an urban area. The laser radars and the network will be placed in the city of Djakarta. The Indonesian authority responsible for the project is Indonesian Institute of Sciences. In fiscal 1994, part of the equipment (difference absorbing LR) was designed and manufactured, the design of the environmental information network system was developed, and various researches required in this connection were conducted. (NEDO)

  5. FY1995 synthesis of new erodable polymers response to environmental stimuli; 1995 nendo atarashii kankyo chowagata bunkaisei plastic no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Recently, environmental pollution by a large amount of undecomposable waste has became a serious problem. Therefore, biodegradable polymers, which can be degraded by environmental species such as bacteria and enzymes, have been studied extensively. Most of the biodegradable polymers prepared so far were polyester derivatives such as poly(hydroxybutyrate/valerate), poly(lactide) and poly(glycolide). The degradation mechanism is the hydrolysis of the ester groups in the main chain of the polymer which is facilitated by enzyme degradation. Most of the mass-produced polymers, however, are vinyl-polymerized plastics such as poly(ethylene), poly(propylene) and poly(styrene). There is no technology on the degradation of such vinyl polymers except in the lithography field, in which it is known that some vinyl polymers can be used for posi-type resists by decomposition with UV or electron-beam (EB). For creation of degradable polymers, the following three factors must be considered Purpose of the project seriously; 1) What degrades the polymers? 2) Row long does the polymer maintain the initial properties? (Time course of the mechanical strength, etc.) and 3) Bioactivity of the liberated oligomers. The aim of our work is the creation of new polymers which can be easily controlled by the above three factors. If we can degrade the polymers from the end of the polymer chain, i) we can control several properties of the polymers in the degradation such as degradation source (pH, light,, UV, EB, etc.) and rate of the degradation by changing the structure of the end group; 2) production of oligomers, which may induce a significant problem in terms of bioactivity, can be suppressed because of the depolymerization from the end of the polymers (only the monomer will be liberated). In this project, we investigated to synthesize the end functionalizations of poly({alpha}-methylstyrene) derivatives and their degradation characteristics using temperature, acid and alkaline conditions. To induce degradabilities in polymers in response to environmental conditions, the end-modification reactions of poly({alpha}-methylstyrene) (PMS) derivatives were carried out. When diphenylphosphine chloride was used as a modifier for the living end of para-substituted PMS, the coupling efficiency was ca. 50%. 2-Phenylallyl halide derivatives such as 2-phenylallyl bromide, 2-(4-tolyl)allyl bromide, and {alpha}-trifluoromethylstyrene were found to be suitable end-modification agents. For example, {omega}-2-phenylallyl PMS was prepared with almost quantitative functionality by the reaction of the living PMS with 2-phenylallyl bromide. In a similar way, {omega}-3, 3-difluoro-2-phenylallyl and {omega}-2-(4-tolyl)allyl PMS derivatives were synthesized. Based on thermogravimetric analysis, onset of the degradation temperature of the end-modified PMS derivatives decreased in the following order: {omega}-hydrogen- > {omega}-3,3-difluoro-2-phenylallyl- > {omega}-2-phenylallyl- > {omega}-2-(4-tolyl)allyl-PMS. Actually, the onset temperature of {omega}-2-(4-tolyl)allyl-PMS derivatives was 50 degree C lower than that of {omega}-H-PMS derivatives. These results indicate that the active species is produced effectively at the end unsaturated bond, which initiates the depolymerization of the polymer at rather low temperatures. Ionic degradation of these polymers was also investigated using butyllithium as an anionic initiator and methanesulfonic acid as a cationic initiator Tendencies similar to the thermal degradation were observed. Therefore, it is concluded that a 2-phenylallyl substituent at the end of the PMS chain induces effective degradation through several mechanisms such as radical, anionic and cationic depolymerization reactions. (NEDO)

  6. Development of environmentally friendly universal controller. Data and materials; 1998 nendo kankyo taio universal controller no kaihatsu seika hokokusho. Shiryohen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    Research and development was carried out for an 'environmentally friendly universal controller (UC)' which would be 'user-friendly and energy-saving' when used with electrical home appliances, and data and materials on them were compiled into this volume. It covers the specifications (Versions 0.6 and 0.51) of a newly developed two-way controller protocol, the specification (Version 0.1) of two-way remote control IrDA-C communication unit hardware, an infrared communication protocol IrDa Control, and the like. It also accommodates information collected through surveys of technological trends as reflected in technical literature, Internet home pages, catalogs, and the like, concerning the user-friendliness of electrical home appliances, remote control, domestic consumption of electric power, and the like. Also covered is the result of surveys of patents involving environmentally friendly UC related technologies, namely, Japanese patents (from applications made in 1979 through disclosures made in 1998) and U.S. patents (registrations made in 1982 and thereafter). Furthermore, it contains the result of surveys of actualities of domestic use conducted for the purpose of clarifying the effect of environmentally friendly UC introduction, how such UCs are being accepted by the public, and the conditions that should be satisfied for their popularization. (NEDO)

  7. Application of genetically engineered microorganisms to bioremediation and wastewater treatment. Idenshi sosa biseibutsu no kankyo joka mizushori eno tekiyo

    Energy Technology Data Exchange (ETDEWEB)

    Fujita, M; Ike, M [Osaka University, Osaka (Japan). Faculty of Engineering

    1993-11-10

    This paper summarizes the following techniques: a gene engineering method for bioremediation and wastewater treatment, microorganism breeding using the former method, and a monitoring technique for genetical and ecological stability of genetically engineered microorganisms. Recombination bacteria reinforced with PH genes showed higher phenol removing rate than wild strains, but presented accumulation of catechol in such a large quantity as cannot be seen in wild strains, with the complete degradation rate rather decreased. Gene recombined bacteria structured by introducing the recombined plasmid, pBH500, had high genetic stability when P.putida BH-1 is used as a host. E.coli C600 having recombined plasmid and P.putida BH were added and cultivated in activated sludge. As a result, both recombined bacteria showed rapid logarithmic decrease just after the addition, then, maintained the relatively stable population groups, and remained in the activated sludge for an extended period of time. In monitoring techniques, the colony hybridization process detected clearly the gene recombined bacteria. 9 refs., 7 figs., 1 tab.

  8. FY1995 technological development for the measurement of higher mental activities. Toward the construction of psychotechnology; 1995 nendo koji seishin katsudo no keisoku kodoka no tame no gijutsu kaihatsu. Ishiki kogaku no kochiku ni mukete

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This research project was designed to develop the advanced measurement system for higher mental activities. Specifically, the following five issues were investigated: 1) the measurements of the mental activity on situations with ecological validity. 2) the construction of systematized measurement systems. 3) the development for integrated multiple measurement indices. 4) the development for comprehensive algorithm models. 5) the revision of concept for measurement of the mental activity. The following six sub-projects were run. 1) we constructed the system for high-speed seiral stimulus presentation on large-scale panel, and developed the technique for psychophysical measurements on dynamic characteristics of visual attention. 2) We developed the pseudo-habitat apparatus for measurement of possible involvement of brain acetylcholine in learning/memory function in rats. 3) We developed the computer-assisted system for measurement of achievement of long-term English-words home learning in high school students. 4) We developed the multi-phasic measurement system for concurrent recordings of eye-movement, behavior, response-time and correct responses during performance of cognitive tasks. 5) We constructed the standard audio-visual database for species-specific behavioral patterns of inter-individual behaviors such as aggressive and sexual behaviors in mice. 6 we developed the audio-visual recording system for measurement and analysis of conversation for social interaction in class rooms. (NEDO)

  9. Fiscal 1998 R and D report on human feeling measurement application technology. Pt. 1. Outline; 1998 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu itaku kenkyu seika hokokusho. 1. Gaiyohen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report outlines the fiscal 1998 R and D result on human feeling measurement application technology. For development of assessment technology of the impact of work fatigue on human feeling (human feeling index), and assessment technology of the adaptability and affinity between human being and environment or product (environment and product adaptability index), data storage and evaluation by measuring experiment of human feeling, and modification of every index toward the final index based on the above data were carried out. Further case studies were carried out to reflect the above both indices to design of living products or residence and office environments, and new data were also collected. The database model for using previously collected human feeling data effectively, and the sweating manikin for estimating human thermal feeling reasonably were developed. In addition, the human feeling measurement manual was prepared to diffuse these technologies. The R and D system is also described. (NEDO)

  10. Report on achievements of research and development of a technology to apply human senses to measurements in fiscal 1994. 1. Summary; 1994 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu. 1. Gaiyohen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    The objective of this research and development is to establish a human sense measurement technique that can measure and evaluate easily and quantitatively the senses of human being to design and fabricate such products as comfortable apparels reflecting the human senses, and living and working environments having less stresses, and a human sense application technique to reflect the human senses on design and fabrication of the products. The first term has performed developments on (1) a physiological effect measurement technology, (2) a simulated environment presenting technology, (3) a technology to investigate the correlation among externally stimulating environment, physiological effects and amount of senses, and (4) an evaluation simulator. In the technology (1), a technology was established that can measure easily changes in physiological reactions in human body such as the ones in brain waves, pupil reaction, and induction potential caused by external stimulation. In the technology (2), a device and a system were structured that can generate and control external stimuli such as the ones from heat, sound, vibration, light, scent, scenery, and constituting materials. In the technology (3), a testing technology was established to acquire correlative data of externally stimulating environment statistically superior, physiological effects and volume of senses. In the technology (4), a sense evaluation simulator and a design aiding system technology that can substitute tests using human bodies was developed. (NEDO)

  11. Measurements of ultrasonic waves by means of laser Doppler velocimeter and an experimental study of elastic wave propagation in inhomogeneous media; Laser doppler sokudokei ni yoru choonpa keisoku to ganseki wo mochiita fukinshitsu baishitsu no hado denpa model jikken

    Energy Technology Data Exchange (ETDEWEB)

    Nishizawa, O; Sato, T [Geological Survey of Japan, Tsukuba (Japan); Lei, X [Dia Consultants Company, Tokyo (Japan)

    1996-05-01

    In the study of seismic wave propagation, a model experimenting technique has been developed using a laser Doppler velocimeter (LDV) as the sensor. This technique, not dependent on conventional piezoelectric devices, only irradiates the specimen with laser to measure the velocity amplitude on the target surface, eliminating the need for close contact between the specimen and sensor. In the experiment, elastic penetration waves with their noise levels approximately 0.05mm/s were observed upon application of vibration of 10{sup 6}-10{sup 5}Hz. The specimen was stainless steel or rock, and waveforms caught by the LDV and piezoelectric device were compared. As the result, it was found that the LDV is a powerful tool for effectively explaining elastic wave propagation in inhomogeneous media. The piezoelectric device fails to reproduce accurately the waves to follow the initial one while the LDV detect the velocity amplitude on the specimen surface in a wide frequency range encouraging the discussion over the quantification of observed waveforms. 10 refs., 7 figs.

  12. Achievement report for fiscal 1998 on the research and development of human sensory measurement application technology. 1. Outline; 1998 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu seika hokokusho. 1. Gaiyohen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    On the basis of the result of an analysis conducted for typical working conditions, indexing is proposed of combined fatigue/alertness impacts on physiology. Efforts are made to standardize measuring systems and to develop measured values into a database. Programs are developed for standardizing techniques of measuring on the free declaration basis the impression generated by things and space and for supporting such techniques. Structural impression models are constructed. From the relationship between the visual psychological/physiological quantities and the physical quantity of texture, a visual quality index is derived for textile goods. An index expression is developed into a formula in relation with habituation to noise and sensation of fatigue. Application cases are expanded in which the indices involving physiological sensation, environments, and product compatibility are reflected on the designs of daily-use commodities and living/working circumstances, and new data are accumulated. A data base model and a perspiration-capable mannequin is completed which estimates man's sensation upon exposure to heat. A common subjective technique of stress evaluation, an advanced technological infrastructure for fatigue indexing, and an experiment of respite environment-related cases with human sensation indices applied thereto are mentioned. (NEDO)

  13. Achievement report for fiscal 1998 on the research and development of human sensory measurement application technology. 2. Subject 1; 1998 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu seika hokokusho. 2. Honronhen 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Indexing systems are proposed which cover the combined physiological effects of fatigue and alertness as experienced under typical working conditions. Efforts are made at standardizing measurement and at developing the results into a database. Concerning the impression generated by things and space, programs for standardizing impression measuring techniques on the free declaration basis and for supporting such techniques are completed. A structural impression model construction method is embodied. Based on the visual psychological/physiological quantities and the physical quantity of texture, an indexing equation is completed for indexing the visual sensation created by textile products. Application cases are expanded in which the indices involving physiological sensation, environments, and product compatibility are reflected on the designs of daily-use commodities and living/working circumstances, and new data are accumulated. A perspiration-capable mannequin is completed which enables the estimation of man's sensation upon exposure to heat. For the indexing of physiological sensation, studies are conducted for the improvement of fatigue indexing technological infrastructure and for the indexing of alertness. Mentioned also are environmental compatibility indexing, product compatibility indexing, human sensation database models and measuring manuals, and experiments of application of restful environments. (NEDO)

  14. Achievement report for fiscal 1996 on the research and development of human sensory measurement application technology. 2. Subject; 1996 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu seika hokokusho. 2. Honronhen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    In relation with fatigue indexing basics in the study of physiological sensation indexing technologies, an indexing system prototype is built, covering muscular fatigue due to a restrained working attitude and mental fatigue due to the load of psychological activities. Features of each fatigue/alertness stage are analyzed, and the time-dependent correlations between the change in psychological quantities and the combined physiological change is also analyzed. In the study of environmental compatibility indexing, color temperatures of office interior, amenity, and spatial dimension indexing are taken up. The impression of office space is analyzed. Highly reliable technologies in pursuit of psychological sensation are established, and efforts are made at indexing environmental compatibility by analyses of physical quantities affecting psychological sensation, and of brain waves. Test methods for habituation to noise are discussed, and relations between the sensations of habituation and fatigue/obstruction are quantified. In relation with product compatibility indexing technologies, products' compatibility with operator's attitude, the line of sight, and loads on human beings is evaluated. Discussed also is the application of the indices involving physiological sensation, environments, and product compatibility to products for daily life and to the designing of living and working environments. (NEDO)

  15. Fiscal 1997 report on the R and D under consignment from NEDO on human sensory measurement application technology; 1997 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu itaku kenkyu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper outlined the result of the fiscal 1997 R and D on `human sensory measurement application technology (HSMAT)` which entered into the second stage. As to the R and D of technology for development of human sensory indices, examples for developing human sensory indices were set up for the following each technology to be developed, and measuring experiments were conducted: technology to assess the effect on physiological senses such as fatigue and awakening, technology to assess human adaptability to various environmental conditions, and technology to assess adaptability of products to humans from a viewpoint of affinity, etc. In relation to the R and D of technology for practical application of human sensory indices, a study was conducted of application examples for using each index to the design of daily products and residential/working environments, and at the same time a prototype database of human sensory data was trially made using part of the experimental data. Moreover, for clothes and working environment to feel better, design/assembly were conducted of a hand/leg movable and sit-on-chair manikin which enables rational estimation of thermal sense of humans. 82 refs., 391 figs., 88 tabs.

  16. Noninvasive brain metabolism measurement using carbon-13 magnetic resonance spectroscopy ({sup 13}C-MRS); Tanso 13 jiki kyomei spectroscopy ({sup 13}C-MRS) ni yoru mushinshuteki notaisha keisoku

    Energy Technology Data Exchange (ETDEWEB)

    Okamoto, K.; Tsukada, Y. [Toshiba Corp., Tokyo (Japan)

    1998-10-10

    Carbon-13 magnetic resonance spectroscopy ({sup 13}C-MRS) and research and development efforts for brain metabolism measurement are described. Brain metabolism is a process characterized in that it not only extracts energy by disintegrating grape sugar that is the practically sole source of energy into H2O, CO2, etc., but also vigorously synthesizes amino acids that perform important functions in neural transmission, such as glutamic acid, glutamine, and {gamma}-amino acid. MRS is a technique that utilizes the magnetic resonance, which is generated when an atomic nucleus with a spin is placed in a magnetic field, for the isolation and identification of chemicals in a living body through examining the delicate difference in the magnetic resonance frequencies of the nuclei under observation. Since the signals from {sup 13}C are low in intensity as compared with those from other nuclides, a method was contrived around 1980, which observes {sup 1}H combined with {sup 13}C in grape sugar and amino acids, named the HSQC (heteronuclear single quantum coherence) method. The author et al., combining gradient magnetic pulses with HSQC, actually measure Homo sapiens brain metabolism using {sup 13}C-MRS, and now believe that the technology will be put to practical application. 7 refs., 10 figs., 1 tab.

  17. Achievement report for fiscal 1996 on the research and development of human sensory measurement application technology. 1. Outline; 1996 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu seika hokokusho. 1. Gaiyohen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    In the study of basic technologies for indexing the degree of fatigue, an indexing system prototype is constructed, involving muscular fatigue due to a restrained working attitude and mental fatigue due to psychological activities. A small oxygen meter is completed and evaluated, capable of quantifying intracorporeal oxygen. In the study of fatigue/alertness standardization, a common-use subjective evaluation method is utilized for scaling mental activities load and local physical load, and physiological data are accumulated. An analysis is conducted into the features of each of the fatigue/alertness stages, and time-dependent correlations are analyzed between the changes in fatigue/alertness-related psychological quantities and the combined physiological changes. In the study of environmental compatibility indexing, the comfort of an office space is indexed by use of technologies for determining psychological sensation. Relative to noise, relations between the sensations of habituation and obstruction are quantified. Conversion into indices of friendliness of products toward workers (relative to working attitude, line of sight, etc.) is also mentioned. Some applications of the physiological sensation index and environment/product compatibility index for the establishment of index systems for household commodities and living/working environments are discussed. (NEDO)

  18. Achievement report for fiscal 1996 on the research and development of human sensory measurement application technology. 2. Subject; 1996 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu seika hokokusho. 2. Honronhen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    In relation with fatigue indexing basics in the study of physiological sensation indexing technologies, an indexing system prototype is built, covering muscular fatigue due to a restrained working attitude and mental fatigue due to the load of psychological activities. Features of each fatigue/alertness stage are analyzed, and the time-dependent correlations between the change in psychological quantities and the combined physiological change is also analyzed. In the study of environmental compatibility indexing, color temperatures of office interior, amenity, and spatial dimension indexing are taken up. The impression of office space is analyzed. Highly reliable technologies in pursuit of psychological sensation are established, and efforts are made at indexing environmental compatibility by analyses of physical quantities affecting psychological sensation, and of brain waves. Test methods for habituation to noise are discussed, and relations between the sensations of habituation and fatigue/obstruction are quantified. In relation with product compatibility indexing technologies, products' compatibility with operator's attitude, the line of sight, and loads on human beings is evaluated. Discussed also is the application of the indices involving physiological sensation, environments, and product compatibility to products for daily life and to the designing of living and working environments. (NEDO)

  19. Leading research in FY 1995. Research of product evaluation and advanced measurements - Part 1 (product evaluation); 1995 nendo sendo kenkyu. Seihin hyoka kodo keisoku bunseki gijutsu ni kansuru chosa kenkyu - 1 (seihin hyoka)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Product evaluation has been investigated from a viewpoint of compatibility with human life by considering human being as the subject of life. This report describes the investigation results. Product evaluation is defined as evaluating products on a consumer-oriented viewpoint and informing consumers of the evaluation results. According to a questionnaire survey with regard to daily living products, products in the low degree of satisfaction in their usage were electric tooth brush, video camera, electric rice jar, vacuum cleaner, and electric iron. Contents of dissatisfaction with these products were classified by aspect, i.e., human aspect regarding human body/recognition, life aspect regarding functions of products and how to use them, and sensitivity aspect such as appearance of products. Thus, points at issue were clarified. As regards the human aspect, incompatibility between the size/form of products and human body/posture, and recognition psychological incompatibility such as difficulty in understanding function or operation of products were pointed out. Establishment of a method for measuring and evaluating the human`s body functions and the compatibility with products, and necessity of the acquisition of human`s body characteristic data and the consolidation positions are also described. 4 refs., 42 figs., 30 tabs.

  20. Fiscal 1999 research report. Research on photonic measurement and processing technology (Development of high- efficiency production process technology); 1999 nendo foton keisoku kako gijutsu seika hokokusho. Kokoritsu seisan process gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This report summarizes the fiscal 1999 research result on R and D of laser processing technology, in-situ measurement technology, and generation and control technology of photon as laser beam source, for energy saving and efficiency improvement of energy-consumptive production processes such as welding, jointing, surface treatment and fine particle fabrication. The research was carried out by a technical center, 9 companies and a university as contract research. The research themes are as follows: (1) Processing technology: simulation technology for laser welding phenomena, synthesis technology for quantum dot functional structures, and fabrication technology for functional composite materials, (2) In-situ measurement technology: fine particle element and size measurement technology, (3) All- solid state laser technology: efficient rod type LD-pumping laser module, pumping chamber of slab type laser, improvement of E/O efficiency of laser diode, high-quality nonlinear crystal growth technology, fabrication technology for nonlinear crystals, and high-efficiency harmonic generation technology. Comprehensive survey was also made on high- efficiency photon generation technologies. (NEDO)

  1. Report on achievements of research and development of a technology to apply human senses to measurements in fiscal 1995. 1. Summary; 1995 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu. 1. Gaiyohen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This paper summarizes the achievements in the development of a technology to apply human senses to measurements in fiscal 1995. The first term has developed mainly the technology to measure sensual information, and the second term is performing development with the target placed on structuring a measure to measure and evaluate the effects of different physiological burdens, environments and products on human being, based on the measuring technology developed in the first term. The second term plans to develop the following items: a technology to use human senses as indexes aimed at making measures for health, safety, comfort, and convenience which are important for human life; studies on applied cases to discuss effectiveness of the human sense indexing technology by applying it to specific products, working places, and living environments; an evaluation simulator technology to measure and evaluate quantitatively and objectively in place of human being the comfort and compatibility therewith; and development is made on a human sense database model that compiles different data obtained in indexing the human senses. The paper also describes achievements of the development. (NEDO)

  2. Measurement method of moving vehicle in the magnetic levitation and propulsion system using high-Tc superconducting bulks; Koon chodendo barukutai wo riyoshita fujo suishin shisutemu no suishin tokusei keisoku shuho

    Energy Technology Data Exchange (ETDEWEB)

    Fuwa, Y.; Mizuma, T.

    1999-06-07

    The transportation system using simple magnetic levitation system got in the combination of high-temperature superconductivity bulk body and permanent magnet, which caught a quantum magnetic flux, is devised in great numbers, and the model equipment has also been manufactured. In the meantime, a grasp of levitation and guide characteristics is necessary for the case in which this levitation system is applied to the simple individual transportation system, and the measurement of the levitation characteristics is indispensable for the reason. In the conventional research, the measurement of the levitation characteristics has not been very much made. There was due to be no technique which measured kinetic characteristics of noncontacting surfacing and running travel body. In this study, measuring method for measuring these levitation characteristics was devised, and it was applied to actual measurement by the production of the model test equipment. Through this measurement, the purpose of this study is to show with that it is applicable for the real test equipment as this measuring method judges possibility of application to simple transportation system. (NEDO)

  3. Measurement of turbulent flow fields in a agitated vessel with four baffles by laser-doppler velocimetry. Mean velocity fields and flow pattern; Buffle tsuki heiento kakuhan sonai nagare no LDV ni yoru keisoku. Heikin sokudoba to flow pattern

    Energy Technology Data Exchange (ETDEWEB)

    Suzukawa, K [Ube Industries, Ltd., Tokyo (Japan); hashimoto, T [Yamaguchi University, Yamaguchi (Japan); Osaka, H [Yamaguchi University, Yamaguchi (Japan). Faclty of Engineering

    1997-12-25

    The three dimensional complex turbulent flow fields induced by a four flat blade paddle impeller in agitated vessel were measured by laser Doppler velocimetry. Mixing vessel used was a closed cylindrical tank of 490 mm diameter with a flat bottom and four vertical buffles, giving water volumes of about 1001. The impellers were at the midnight of the water level in the tank. A height of liquid (water) was equal to the vessel diameter. Three components of mean velocity were measured at three vertical sections {theta}=7.5deg, 45deg and 85deg, in several horizontal planes. Mixing Reynolds number NRe was 1.2 times 10{sup 5}. It can be found from the results that circumferential mean velocity profiles show the symmetrical shape in the upper and lower sides of impeller. Secondary velocity components, such as axial and radial velocities, however, were not in symmetry. For this reason, the ratio of circulation flow volume which enter in upper and lower sides of impeller was roughly 7/3. In both the middle and buffle regions, mean flow velocities (flow patterns) were different, dependent of three vertical planes with different circumferential angle measured from buffle. 10 refs., 8 figs., 1 tab.

  4. Report on evaluation of research and development of light-aided instrumentation/control systems. Abstract; Hikari oyo keisoku seigyo system no kenkyu kaihatsu ni kansuru hyoka hokokusho. Gaiyohen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1986-08-01

    This research and development project is aimed at commercialization of the light-aided instrumentation technology systems which safely, stably measure, transmit and control process information including image information, e.g., temperature, flow rates and components at large plants in industrial complexes, in the severe atmospheres in the presence of, e.g., electromagnetic induction and combustible gases. These optical systems need development of light transmitting/receiving devices, various optical devices that constitute the network nodes, and various types of sensors of improved functions and reliability, in addition to development of the techniques required for transmitting large quantities of information on a large scale. This project has attempted to systematically make break-through in the individual elementary techniques, in particular those in the widely diversified technological areas for the advanced devices, and thereby to expand the instrumentation/control technology frontiers. The results of studies on gallium/arsenic crystals, which are prerequisite for photoelectronic integrated circuits as the bases for the light application technology, and processes for producing thereof are highly rated worldwide. It is planned to effectively utilize the total system, constructed at then Nippon Mining's Mizushima Refinery, and thereby to establish the effective instrumentation techniques for commercial plants and to promote commercialization of these results. (NEDO)

  5. Report on achievements of research and development of a technology to apply human senses to measurements in fiscal 1994. 3. Appended data; 1994 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu. 3. Fuzoku shiryohen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    From among the achievements of research and development of a technology to apply human senses to measurements in fiscal 1994, candidates considered to fall under the know-how were picked up. Those enumerated in composite measurement of physiological functions to measure stresses are the skin impedance and continuous blood pressure measuring device, and in contact-free skin temperature measurement, the procedure for data communication and image processing inside the devices. The method for making thermopile elements for tympanum temperature sensor proto-model, element output amplification circuit, and thermister output conversion circuit were enumerated in the living organism activity and living organism rhythm measurements. Development of a nonrestraint accelerated pulse meter was also described. The method for recording parameter file names in impulse response measurement by using audio signals was enumerated in the composite acoustic environment presenting, evaluating and improving methods. The warm heat comfort evaluating method by using a human body thermal model, and the sense volume estimating method by using skin temperatures were also enumerated. The stress measurement and the stress relaxing technology using scent were also described. The space-type human interface adapted to human senses, and comfort meter development were also enumerated. (NEDO)

  6. Study of a fuel injection quantity sensor in diesel engine. Part 3. Experimental evaluation of the improved type micro turbine sensor; Diesel kikan ni okeru nenryo funsharyo sensor no kenkyu. 3. Funsharyo keisoku no seido kojo ni kansuru jikken hyoka

    Energy Technology Data Exchange (ETDEWEB)

    Maehara, H; Iwasaki, T; Kobayashi, T [Zexel Corp., Tokyo (Japan)

    1997-10-01

    A Micro Turbine Sensor has been developed to measure fuel injection quantity and injection rate. Previous reports described results of experiments on the MTS which were carried out under steady and unsteady flow conditions. The MTS has been improved in shape of a holder tip and a detecting procedure for rotating speed of a turbine. As a result revolution speed of the turbine increased 18% over the conventional type holder under steady flow condition. Furthermore the measurement resolution of the MTS came up to about 2(mm{sup 3}/pulse) at 20(mm{sup 3}/stroke) under intermittent spray conditions using fuel injection pump. 11 refs., 11 figs., 1 tab.

  7. Measurement method of a motion of traveling vehicle via three-dimensional image processing system; Sanjigen gazo kaisekiho ni yoru sharyo undo no keisoku to sono bunseki ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Yamada, Y; Matsuura, Y [Osaka Sangyo University, Osaka (Japan)

    1997-10-01

    Motion of traveling vehicle was taken by VTR-cameras set on the test course, as well as it also was measured by conventional measurement methods using sensors and devices installed in the vehicle. lotion pictures of the VTR were analyzed using three-dimensional image processing system (Peak lotus system). As a result, this system was especially effective for the measurement of traveling traces of the actual vehicle and the results were good agreement with the data obtained by conventional measurement methods. 2 refs., 8 figs.

  8. Achievement report for fiscal 1998 on the research and development of human sensory measurement application technology. 2. Subject 2; 1998 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu seika hokokusho. 2. Honronhen 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Developed indices are applied to combined environments which better approximate daily life for validity verification for elucidating the relations between the indices in intensified joint experiments aiming at their integration and further development. Experiments are conducted in laboratories simulating the circumstances of daily life, where office environments or living circumstances are simulated through controlling light, sound, heat, etc. Used mainly are facilities in Kansai Science City, with subsidiaries provided in Tokyo and Osaka. Studied concerning each of the physiological indices for stress, fatigue, alertness, etc., are their integration, validity verification, and influence of environmental factors. Relations between fitness, sensation of fatigue, rest, etc., under circumstances involving light, sound, and heat are deliberated. An index equation is constructed, capable of highly accurate, quantitative prediction of quantities of objective evaluation of the sensation of fitness etc. on the basis of combined environmental physical characteristics, and designing guidelines are shown. Studied in the simulation of real life are relations between products and physiological indices, effect of illumination and bathing, and the evaluation of ununiform thermal environments. The results are installed in a database for human sensation manuals. (NEDO)

  9. FY 1998 annual summary report on photon measuring/processing techniques. Development of highly functional maintenance techniques for power generating facilities; 1998 nendo foton keisoku kako gijutsu. Hatsuden shisetsuyo kokino maintenance gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The objectives are set to develop the techniques for non-destructive measurement of conditions of facility portions, especially those exposed to severe environments, e.g., elevated temperature and pressure, over a wide range; the techniques for measurement of leakage of, e.g., gases, at high sensitivity; the techniques of laser-aided welding and surface-modification treatment for the members exposed to severe conditions; and the techniques for generating photon beams of high quality and energy density as the tools therefor, in order to improve reliability and maintenance efficiency of power generating facilities. The R and D themes are microscopic processing technology: fabrication technology for functional micro-composite circuits; in-situ status measuring technology: gas concentration/component measurement technology, and photon wavefront compensation device technology; non-destructive composition measuring technology: high-sensitivity detection technology using short-wavelength photons; high-power all-solid-state laser technology: rod-type laser and slab-type laser; tightly-focusing all-solid-state laser technology: high-energy pulse, high-quality laser; and comprehensive investigation of photonics engineering: investigation for photon-applied measurement technologies. (NEDO)

  10. FY 1991 report on the results of the contract R and D of the human sense measuring application technology. 1. Outline; 1991 nendo ningen kankaku keisoku oyo gijutsuno kenkyu kaihatsu seika hokokusho. 1. Soron

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-03-01

    For the purpose of designing/manufacturing products such as comfortable clothes in which human senses are reflected and the living/working environment in which people feel little stress, the aim of the R and D is to establish a human sense application technology in which various human senses are reflected in design/manufacture of products. The structure of this report is as follows: In Volumes 2, 3 and 4, the research results by research item were summarized. In Volume 1, the research results of each of the research institutes described in Volumes 2, 3 and 4 were summarized. In Volume 1, Outline, the R and D made during I and II terms and the schedule, the results of the FY 1991 target, plan and activity of each of the research institutes. In Volume 2, R and D of the physiological effect measuring technology, the details of research activities of each of research institutes which belong to this section meeting, and the activities related to the physiological effect measuring technology. In Volume 3, the details of research activities of each of research institutes which belong to the section meeting for the R and D of technology to present the mock environment. In Volume 4, the details of research activities of each of the research institutes which belong to the section meeting of the R and D of correlation/evaluation technology. (NEDO)

  11. Droplet size measurement of diesel fuel spray particles using a planar laser-induced fluorescence method; Nijigen laser yuki keikoho wo mochiita diesel funmu ryushi no ryukei keisoku ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Ishikawa, N. [Isuzu Motors Ltd., Tokyo (Japan); Niimura, K. [Nissan Diesel Motor Co. Ltd., Saitama (Japan); Tsujimura, K.

    1997-11-25

    In this study, the planar laser-induced fluorescence (PLIF) technique was used to measure the mean size and size distribution of diesel spray particles. The fuel used was n-tridecane mixed with 1 wt% N, N, Nprime, Nprime-tetramethylparaphenyenediamine (TMPD). The light source used to excite the TMPD in the fuel was a secondary harmonic of a ruby laser-light sheet. A highly magnified image of the fluorescence from TMPD was taken by a 35 mm still camera with magnified optics, and the mean particle size and particle size distribution of the fuel spray were determined by processing the images of fuel particles printed on paper. First, the accuracy of this method was confirmed by comparison with results of Phase Doppler Anemometry for fuel spray of an air-assisted gasoline injector. Then, for the diesel spray, the effects of injection velocity, ambient pressure, geometric configuration of nozzle hole (i.e., nozzle hole diameter and nozzle hole L/D) and of measurement points on the fuel particle mean size and size distribution in a high-pressure vessel at atmospheric temperature were investigated. The results showed that the small size particles increase in number with increasing injection velocity. At higher injection velocity, seem to atomize more actively. With increasing ambient pressure, the mean particle size increases. A reduction in nozzle diameter resulted in no improvement of atomization in this study. Also, the mean particle size in the downstream region of the spray is larger than that in the upstream region of the spray. 16 refs., 19 figs., 3 tabs.

  12. Surface temperature measurement using infrared radiometer. 1st Report. ; Radiosity coefficient and radiation temperature. Sekigaisen eizo sochi wo riyoshita jitsuyoteki ondo keisoku ni kansuru kenkyu. 1. ; Shado keisu to hosha ondo no kankei

    Energy Technology Data Exchange (ETDEWEB)

    Okamoto, Y; Inagaki, T; Sekiya, M [Ibaraki University, Ibaraki (Japan). Faculty of Engineering

    1993-12-25

    As a part of the studies on practical surface temperature measurement by infrared radiometer, some basic characteristics of an infrared radiometer were studied by using three kinds of sensors with different detectable wave lengths. Specimens allowable for gray body approximation such as mortar, graphite and carbon fiber composite material were tested at a practical ambient temperature of 293 K. As a result, the difference between a radiation temperature in consideration of reflection and that derived from an emissivity increased with a decrease in emissivity, and the deviation of an emissivity derived from a radiosity coefficient increased at 20 K or less in difference between a specimen surface temperature and ambient one. Each radiosity coefficient measured by each sensor also fairly agreed with each other. The deviation of a radiosity coefficient was relatively small indicating a good agreement between theoretical and experimental data, while the difference between emissivity and radiosity coefficient deviations decreased with an increase in specimen surface temperature. 3 refs., 10 figs., 1 tab.

  13. Surface temperature measurement using infrared radiometer. 2nd Report. Applicability of pseudo gray body approximation. Sekitaisen eizo sochi wo riyoshita jitsuyoteki ondo keisoku ni kansuru kenkyu. 2. Giji Haiiro kinji no tekiyosei

    Energy Technology Data Exchange (ETDEWEB)

    Inagaki, T; Sekiya, M; Ishibashi, H; Okamoto, Y [Ibaraki University, Ibaraki (Japan). Faculty of Engineering; Kurokawa, K [NEC Corp., Tokyo (Japan)

    1994-06-25

    Establishment of a simple and reasonable technique and its application to the metallic surface in addition to the nonmetallic surface in the room-temperature measurement using infrared picture equipment have been studied. It was found, as published in the previous paper, in the investigation of radiation temperature, radiosity coefficient, their wave-length dependence and the dispersiveness of these parameters about the surfaces of various kinds of material that the assumption of gray body approximation does not hold in the surfaces of metal and part of nonmetal. In the present work, applicability of pseudo-gray body approximation to the metal surface in a system surrounded by black body surfaces was studied in consideration of directivity of emissivity and reflectance while, in actual, a measuring angle of 15 degrees giving a small directivity effect was used based on experimental results. As in the previous paper, three kinds of sensors different in the detectable wave-length range were used to evaluate the radiation temperature, emissivity, radiosity coefficient, and their dispersiveness. The experimental results proved the applicability of pseudo-gray body approximation. 3 refs., 18 figs., 2 tabs.

  14. Fiscal 1999 research report. Research on photonic measurement and processing technology (Development of advanced maintenance technology for power plant facilities); 1999 nendo foton keisoku kako gijutsu seika hokokusho. Hatsuden shisetsuyo kokino maintenance gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This report summarizes the fiscal 1999 research result on R and D of measurement technology, laser welding and surface treatment technology, and generation technology of photon beam, for improvement of the quality and maintenance efficiency for power plant facilities. In the study on fabrication of functional micro-composite circuits, the equipment for forming circuits on substrates by carrying particles with gas was developed whose geometric standard deviation is 1.17 for 26nm particles. In the study on gas concentration measurement technology, development of the variable-wavelength laser beam source for measurement, fabrication of thin films by epitaxial growth equipment, and computer simulation of sensitivities for quantum IR photo- detectors were promoted. In the study on photon wavefront compensation device technology, the technology for fabricating such device with (411)A surface orientations and asymmetric quantum well structures was developed. In the study on high-sensitivity detection technology using short- wavelength photon, to develop a high-energy resolution fluorescent X-ray detector, favorable electric properties of superconducting X-ray detecting devices were confirmed at nearly 0.1K. (NEDO)

  15. Measurement of friction coefficient for various thin films using millimeter-size movers driven by electro-static force. Seiden kudogata bisho mover wo mochiita usumaku no masatsu keisoku

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, M; Watanabe, S; Yoshimura, N [Akita Univ., Akita (Japan); Fujita, H [The University of Tokyo, Tokyo (Japan)

    1992-12-20

    Discussions were given on measurements of coefficients for static friction between different types of thin films. A small light-weight mover of a millimeter size was driven electrostatically to measure friction in a condition close to operation of a micromachine. The thin film materials were fabricated using a sol-gel process, sputtering, vacuum deposition and a CVD process. The materials include Ni, Ti, Al, SiO2, SiNx, Si wafers and glasses. The measured values for Ni-Ni, Al-Al and Ni-Al were larger by from 0.1 to 0.2 than values for bulk. The reason for this would be because of the friction generating mechanisms being different and the sample weight being lighter. Measured values for different types of thin films on silicon wafers were higher. This may be because OH groups are formed on the wafer surface causing high adhesiveness. Values for glasses are small in general. Friction coefficients for SiO2 thin films are small on the whole. However, SiO2-SiO2 showed larger values. This indicates that SiO2 is a useful material for micromechatronics, but proper selection of contacting opponents is important. 7 refs., 4 figs., 7 tabs.

  16. Report on achievements of research and development of a technology to apply human senses to measurements in fiscal 1993. 1. Outline; 1993 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu. 1. Soron

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    This paper outlines the development of a technology to apply human senses to measurements in fiscal 1993. Using the period from fiscal 1990 through 1994 as the first term, development is made for physiological effect measurement on a technology to measure in a simplified manner the physiological changes as brainwave and pupil reactions and induction potential caused by external stimulation. For the simulated environment presenting technology, devices and systems are structured that can generate and control collectively such externally stimulated environments as heat, sound, vibration, light beam, scent, scenery, and constituting materials. The technology to investigate correlation among the externally stimulated environments, physiological effects, and sense volume establishes a testing technology to acquire efficiently the statistical correlation data. Achievements obtained by fiscal 1993 may be summarized as follows: a non-contact non-invasion measuring device was fabricated on a trial basis to identify quantitatively the sense volume attributed from external stimulation, and the device was given experiment, evaluation and improvement; with regard to the simulated environment presentation, partially detailed design, fabrication and experiment were performed on a device that can effectively present the subjects with such environments as sound and space; and in the correlation investigation technology, the basic experiments have resulted in a simulator to evaluate correlation among stress, fatigue and arousal, and correlation between spatial environment and visual information. (NEDO)

  17. FY 1998 annual summary report on photon measuring/processing techniques. Development of the techniques for high-efficiency production processes; 1998 nendo foton keisoku kako gijutsu seika hokokusho. Kokoritsu seisan process gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The objectives are set to develop the techniques for energy-efficient laser-aided processing; techniques for high-precision, real-time measurement to improve quality control for production processes and increase their efficiency; and the techniques for generating/controlling photon of high efficiency and quality as the laser beam sources therefor, in order to promote energy saving at and improve efficiency of production processes consuming large quantities of energy, e.g., welding, joining, surface treatment and production of fine particles. The R and D themes are microscopic processing technology: simulation technology for laser welding phenomena; microscopic processing technology: synthesis of technology for quantum dot functional structures; in-situ status measuring technology: fine particle elements and size measurement technology; high-power all-solid-state laser technology: efficient rod type LD-pumping laser modules and pumping chamber of a slab-type laser; tightly-focusing all-solid-state laser technology: improvement of E/O efficiency of laser diode, high-quality nonlinear crystal growth technology and fabrication technology for nonlinear crystal; and comprehensive investigation of photonics engineering: high-efficiency harmonic generation technology. (NEDO)

  18. Fiscal 1999 technological survey report. Part 1. Applied technology for measuring human sense (Human sense measuring manual - human sense evaluation index guideline); Ningen kankaku keisoku manual. 1. Ningen kankaku hyoka shihyo guide line

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A method of measuring/evaluating a mental and physical state by means of physiological information developed by a project was compiled into a 'guide book', as was a method of evaluating adaptability to the environment or products; and, this manual was prepared for the purpose of improving the adaptability of human beings to products by making use of the guide book widely in the field of industrial manufacturing. Described in the part 1 are a method of evaluating human mind and body by the measurement of physiological quantity, a method of evaluating mental and physical adaptability from the element of environmental physics such as vision, sound and warmth, and a method of evaluating adaptability concerning utilization of machines and equipment, as 'human sense evaluation indexes'. The chapter 1 is the index of physiological/psychological state (stress evaluation index, fatigue/awakening evaluation index), the chapter 2 is an environmental/psychological index (overall environmental evaluation index, visual environmental effect index, sound/vibration environmental evaluation index, thermal environmental evaluation index), the chapter 3 is an adaptability evaluation index of products and the like (adaptability evaluation index by form and movement, evaluation index for operability of equipment for example), and the chapter 4 is the guideline (of environmental design and of product design). (NEDO)

  19. FY 1998 report on the result of the R and D of human sense measurement application technology. II. Main issue (1); 1998 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu itaku kenkyu seika hokokusho. 2. Honronhen (1)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The paper reported the results of the FY 1998 R and D on human sense measurement application technology. Term I of this project is FY 1990-1994, when the interim evaluation was made. The project entered Term II of FY 1995-1998. In Term II, developments were made of the human sense measuring technology to make a 'measure' for health/safety and amenity/convenience which are important to human life, study of application examples for studying effectiveness by concretely applying this measuring technology to examples of products and working place/residential environment, evaluation simulation technology to qualitatively/objectively measure/evaluate amenity and adaptability in stead of humans, human sense database models which collected various human sense data obtained in measuring, etc. Through these technology development, the systematization of human sense indexes is attempted, and finally the following are conducted: development of measuring technology of kindness and evaluation equipment, environment/product design support, manual making for human sense measurement, construction of human sense database, etc. In FY 1998, the results of the measuring technology were mainly obtained. (NEDO)

  20. Fiscal 1999 technological survey report. Part 2. Applied technology for measuring human sense (Human sense measuring manual - basic technology for sense evaluation); Ningen kankaku keisoku manual. 2. Kankaku hyoka kiban gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A method of measuring/evaluating a mental and physical state by means of physiological information developed by a project was compiled into a 'guide book', as was a method of evaluating adaptability to the environment or products; and, this manual was prepared for the purpose of improving the adaptability of human beings to products by making use of the guide book widely in the field of industrial manufacturing. The part 2 explains a hard measuring instrument, evaluation device, simulation system, method of data analysis, etc., as 'basic technology for sense evaluation'. The chapter 1 is a new measuring and evaluation device (device for measuring physiological signals on the surface of the body, device for measuring visual characteristics, measuring device of in vivo substance, measuring device of thermal response, and system for evaluating adaptability of practical form), the chapter 2 is a new simulator (model of human body temperature with clothes on, human comfort meter, perspiring thermal manikin, and autonomic nerve control model in cardiac blood vessel/respiratory system), and the chapter 3 is new experimental/analytical method (new data analysis method and subjective evaluation questionnaire for stress assessment). (NEDO)

  1. Achievement report for fiscal 1998 on the research and development of human sensory measurement application technology. 1. Outline; 1998 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu seika hokokusho. 1. Gaiyohen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    On the basis of the result of an analysis conducted for typical working conditions, indexing is proposed of combined fatigue/alertness impacts on physiology. Efforts are made to standardize measuring systems and to develop measured values into a database. Programs are developed for standardizing techniques of measuring on the free declaration basis the impression generated by things and space and for supporting such techniques. Structural impression models are constructed. From the relationship between the visual psychological/physiological quantities and the physical quantity of texture, a visual quality index is derived for textile goods. An index expression is developed into a formula in relation with habituation to noise and sensation of fatigue. Application cases are expanded in which the indices involving physiological sensation, environments, and product compatibility are reflected on the designs of daily-use commodities and living/working circumstances, and new data are accumulated. A data base model and a perspiration-capable mannequin is completed which estimates man's sensation upon exposure to heat. A common subjective technique of stress evaluation, an advanced technological infrastructure for fatigue indexing, and an experiment of respite environment-related cases with human sensation indices applied thereto are mentioned. (NEDO)

  2. Achievement report for fiscal 1997 on the research and development of human sensory measurement application technology. 1. Outline; 1997 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu seika hokokusho. 1. Gaiyohen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Efforts continue to analyze time-dependent correlations between changes in fatigue/alertness-related psychological quantities and combined physiological changes. Using an office space as a sample, an augmented model is completed relative to the method of measurement, analysis of impression structure, scaling of the degree, and simultaneous relationship analysis. The environmental compatibility indexing is improved by analyzing physical quantities and brain waves that influence psychological sensation. Application case studies are conducted in which indices of physiological sensation, environments, and product compatibility are reflected on the designs of daily-use products and living/working circumstances, and a human sensory database prototype is experimentally constructed. The subjective evaluation questionnaire form is improved, and effectiveness is verified through experiments for indexing the evaluation of stress. The indexing prototype, related to muscular fatigue due to a restrained working attitude and mental fatigue due to psychological activities load, is enhanced in precision. A field test is conducted on the index of short-term fluctuation in alertness, and a study is made for optimizing the work load level. The product compatibility indexing technology is also improved. (NEDO)

  3. Fiscal 1998 report on technological results. International cooperation project (Development/survey of high speed accelerometer measurement system); 1998 nendo koseido kasokudo keisoku system no kaihatsu chosa seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    On the basis of the judgment that the measurement of an impact force and acceleration is indispensable for evaluating safety of an automobile, developed jointly with the U.S. were a high precision system for measuring/evaluating acceleration and an impact force for calibration of instruments and also an impact force evaluation system such as an acceleration sensor and measuring instrument. To be concrete, the following were conducted; (1) development of high-speed acceleration measuring system for calibration of instruments, (2) evaluation of characteristics of pressure sensitive paper for example, and (3) verification test using a vehicle body unit. In (1), a vibrating table capable of three-dimensional control was developed, as was a device for measuring the movement of a specimen on the vibration table with a laser interferometer. In (2), dynamic characteristics were measured, using the device developed, for a pressure-sensitive paper sold in the market and a sensor system produced experimentally. It revealed that the dynamic characteristics were different from static ones. In (3), these sensors and measuring systems were incorporated into a vehicle body unit, with evaluation made on a bench test (11 km/h) and on an actual head-on collision test (55 km/h). (NEDO)

  4. Report on achievements of research and development of a technology to apply human senses to measurements in fiscal 1992. 1. Outline; 1992 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu. 1. Soron

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-03-01

    This paper describes the outline of the research and development of a technology to apply human senses to measurements in fiscal 1992. The achievements by fiscal 1992 may be summarized as follows: in order to identify quantitatively the sense volume attributed to external stimulation in the physiological effect measurement, partially detailed design, prototype fabrication and basic experiments were performed on the measurement technology that can measure physiological effects in the non-contact and non-invasion manner; for the simulated environment presenting technology, in order to create comfortable living and working environments that are adapted to human senses, development is made on a technology to present simulated environments required for subject experiments to measure physiological effects on human being caused from external stimulation, and elucidate correlation in human reactions between multiple number of external stimulation factors; fiscal 1992 has carried out the partially detailed design and prototype fabrication on a technology to provide the subjects efficiently with such stimuli as temperature, humidity, radiation, atmospheric sound, solid sound, vibration and light beam; in investigating the correlation among the external stimulating environment, physiological effect and sense volume, experiments were carried out to acquire efficiently the external stimulation, physiological effect and sense volume associated with stimulation; and fundamental elucidation was given on the correlation. (NEDO)

  5. FY1995 study of the new generation system for the vector type biomagnetmeter and optimization of the system; 1995 nendo jisedai seitai jiki tajigen keisoku system oyobi saitekika no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The most advanced devices for magneto-encephalography(MEG),so far developed are equipped with more than 100 channels which measure the z-component of the magnetic field perpendicular to the surface of the scalp or of the chest, However, there do not exist any multi-channel MEG measuring device capable of measuring the three components of the MEG vectors. The purpose of this study is to develop a SQUID magnetometer with more than 180 channels with the configuration for the three-component vector measurement and to apply the device to the investigation of the higher functions of the brain of which the mechanisms are still largely unknown. Furthermore, it will open up new clinical methods for various discases. 1) We arranged three coils in a column to measure the x,y and z-components of the magnetic field and arranged 60 of those columns so that they cover the whole scalp and measure the 3-component MEG at 60 points simultaneously. 2) We developed a dewar in which more than 200 SQUID elements can be immersed in liquid helium and at the same time the arrangement of the coils allows as close fit as possible to the scalp to be measured. 3) A gantry was developed for the above dewar so that the dewar might be fixed at an arbitary position and its vibrations were minimized. 4) DOIT-type circuit was adopted for the FLL circuit, which realized a simple system. 5) We established a signal processing system which samples the signal from all the SQUID sensors simultaneously at a high sampling rate and analyzes the data efficiently. 6) We measured 3-component MEG signals and found that it can bring out new information useful for investigating the higher functions of the brain. (NEDO)

  6. Evaluation of aerodynamic stability and a trial study of construction-accuracy control by daytime measurement of Meiko West Bridge; Meiko Nishi Ohashi no taifusei kento to chukan keisoku kekka wo mochiita kasetsu seido kanri no shiko

    Energy Technology Data Exchange (ETDEWEB)

    Morimoto, C.; Shimodoi, H.; Isoe, A.; Sakai, Y.; Ochiai, M.; Watabe, T.; Ebihara, R. [Kawasaki Heavy Industries, Ltd., Kobe (Japan)

    1998-12-20

    The new Meiko West Bridge was constructed very closely to the phase I line bridge which have been already in a service from 1985, and the distance of this world unique parallel cable-stayed bridges is 50m. The length, span and pylon height of these bridges are identical. By conducting wind tunnel experiments considering the aerodynamic interference of the close parallel bridges, the aerodynamic stability of the bridge had been confirmed during construction as well as complete state. After the construction was completed, the important wind characteristics of the parallel cable-stayed bridges were obtained from the site observation. Regarding cable vibrations, a common problem with cable-stayed bridges, a suitable vibration suppression method was applied based on the site observation. In general, the construction-accuracy control is performed by doing measurement at night However, to study the possibility of the accuracy-control by daytime measurement the measurement was conducted not only at night but also in the daytime. (author)

  7. Achievement report for fiscal 1997 on the research and development of human sensory measurement application technology. 2. Subject; 1997 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu seika hokokusho. 2. Honronhen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Efforts continue from the previous fiscal year to analyze time-dependent correlations between changes in fatigue/alertness-related psychological quantities and combined physiological changes. Using an office space as a sample, an augmented model is completed concerning a relative method of measurement, analysis of impression structure, scaling of the degree, and simultaneous relationship analysis. The environmental compatibility indexing is improved by analyzing physical quantities and brain waves that influence psychological sensation. In the indexing of product compatibility wherein the compatibility between products and human beings is evaluated from the viewpoint of affinity or friendliness, the index structure dependent on subjectivity and physiological reaction is enhanced in precision. Application case studies in which indices of physiological sensation, environments, and product compatibility are reflected on the designs of daily-use products and living/working circumstances, and a human sensory database prototype is experimentally constructed. The indexing prototype, related to muscular fatigue due to a restrained working attitude and mental fatigue due to the load of mental activities, is enhanced in precision. In the study of product compatibility indexing technology, improvement and evaluation are carried out on the practical attitude/sight line evaluation system. (NEDO)

  8. Leading research and survey report for fiscal 1999. Survey and research on high-sensitivity passive measurement analysis technology; 1999 nendo kokando passive keisoku bunseki gijutsu no chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Effective use of the limited natural resources and preservation of global environments are sought for with the 21st century approaching. In the field of measurement analysis, 21st century type technologies are desired, different from the current ones whose improvement is to be attained through reaching for the limits of sensitivity and resolution. Although the laser device with its performance innovatively advanced has now come to provide light sources for measurement, yet they retain their own flaws of damaging or destroying the object of measurement. Passive measurement techniques need to be developed using natural light or white light as well as laser, which will enable the measurement of the shapes and characteristics of human beings, other animals, and vegetables by use of their radiation, and to determine the kinds and amounts of components of the living environments by use of natural light. Techniques should be developed to measure, in natural light or artificial illumination, shapes and colors, and microscopic substances on solid matters, their temperatures, and reaction processes in factories and laboratories. In this connection, surveys are conducted of technologies for measuring safety, productivity, and environment improving potential. Technologies key to their realization are those involving novel heterodyne interference and light source quality improvement, light amplification, cohering, signal processing, chemistry and mass transfer, establishment of multidimensionality, systematization, etc. (NEDO)

  9. FY 2000 Report on the results of survey on recent situations of global warming mitigation measures related to alternative fluorochlorohydrocarbons; 2000 nendo daitai furon no chikyu ondanka taisaku doko ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The recent situations of global warming mitigation measures related to flurine-containing greenhouse gases of HFC, PFC and SF{sub 6} are surveyed. In the meeting of the Parties of Montreal Protocol of 2000, no decision has been made on HCFC phaseout schedule amendment in the developed and developing countries, which is one of the major items. COP-6 has failed to reach agreement on handling CO2 absorption sources. For the international trends in estimation of the emissions of HFC and others, the IPCC's emission estimation methodology guidance for HFC, PFC and SF{sub 6} (translated into Japanese) and the methodologies taken by other countries are introduced. The trends of the emission control measures for HFC, PFC and SF{sub 6} include CO2 refrigerant application for mobile air-conditioners, announcement by Coca-Cola of HFC phaseout by 2004, announcement by the Canadian refrigerant air-conditioner industry of introduction of the surcharge system for promoting refrigerant recovery, and SF{sub 6} emission reduction technologies in Mg fabricating industries. Also introduced are cost evaluation of emission reduction technologies, latest scientific knowledge in the global environments, and harmonization of global warming mitigation and ozone layer protection in the developing countries, among others. (NEDO)

  10. FY 2000 report on the results of the survey of the project for implementation of 'The New Earth 21'; 2000 nendo 'chikyu saisei keikaku' no jisshi keikaku sakusei ni kansuru chosa jigyo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    As the research study contributing to implementation of 'The New Earth 21' proposed by Japan at the Houston Summit in 1990, a DNE21 model was developed as a quantitative assessment model for global warming preventive technology, heightening of efficiency of the global energy supply/demand system, conversion to energy sources of low carbon emissions, etc. In the project of 'The New Earth 21,' economy and environment can be compatible centering on developed countries' technical development and technology transfer to developing countries. In FY 2000, for heightening applicability of the DNE21 model, the world, which was used to be divided into 10 regions, was divided into 54. At the same time, a prototype model was constructed in which cities in the region were divided into three cities: large; medium; small. Using the DNE21 model, evaluation was made of effects of uncertainties such as population, economic growth, final energy demand and cost as preconditions of the model on the optimization of global warming preventive measures. Further, technologies which are expected to be important for global environmental policy in the ultra-long term were listed up to estimate the potentiality. (NEDO)

  11. Fiscal 1997 report on the survey project on planning to execute `The New Earth 21`; 1997 nendo chosa hokokusho (`chikyu saisei keikaku` no jisshi keikaku sakusei ni kansuru chosa jigyo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Japan proposed in the Houston Summit the New Earth 21 to be carried out with technology development and technology transfer, and to make a concrete development of the project, Japan also proposed in the Tokyo Summit a TREE Plan for working out comprehensive strategies of the innovative technology development. In the CO3 Kyoto Conference in 1997, numerical targets for developed countries were determined which have legal binding force for control/reduction of greenhouse gas emissions in the term of 2008-2012. It was agreed to urge developing countries also to play a certain part in the project through the clean development. Therefore, the paper made quantitative analysis of important CO2 prevention technologies, technology transfer costs, and economical assessment by energy conservation. As a model, the DNE 21 model was upgraded and used into which CO2 prevention technologies, energy, economy and climate changes were integrated. In fiscal 1997, the following were carried out: collection of data on important CO2 prevention technologies and systems and analytical assessment using the DNE 21 model, CO2 reduction and selection of energy technology, assessment of energy system costs, construction of the unified DNE 21 model, and opening of the international workshop. 62 refs., 98 figs., 34 tabs.

  12. Investigations in relation with prevention of global warming in fiscal 2000. Structuring of strategies related to emission trading; 2000 nendo chikyu ondanka boshi kanren chosa hokokusho. Haishutsuryo torihiki ni kakawaru senryaku kochiku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Investigations in relation with the greenhouse effect gas emission trading system have been performed on introduction and discussion of the system in major countries in order to discuss basically the emission trading system in Japan. The EU has been advancing the discussion with the introduction thereof to start in 2005 kept in mind, whereas the points of issue for the system designing include the followings: what roles should be taken by the EU and membership countries, consistency between the membership countries with regard to the participating organizations, and the scheme for initial allocation. In Denmark, the emission trading system has been introduced in January 2001 between the electric power companies. The objects of the allocation are only the eight power generation companies, making the management of emission right retaining quantities by the government simple. The United Kingdom has a schedule of introducing the emission trading system in April 2001, but the trading itself will start in 2002. Management of the trading scheme, and acceptability of banking after 2008 are the main points of issue. In the fundamental discussions on designing the emission trading system in Japan, discussion items were extracted, and the points of issue were put into order. (NEDO)

  13. Research report for fiscal 1998. Research for 'New Earth 21' project implementation program preparation; 1998 nendo chosa hokokusho. 'Chikyu saisei keikaku' no jisshi keikaku sakusei ni kansuru chosa jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For the establishment of a CO2 measures introduction scenario which the world would accept, the latest information was collected, the DNE21 (Dynamic New Earth 21) model was improved, and simulation was reviewed. In fiscal 1998, simulation was performed for each district using an LDNE21 (Linear Dynamic New Earth 21) model, and an energy flow chart, energy balance table, and trade table were prepared and subjected to detailed deliberation. Studied were also conducted about the changes to occur in methanol production when the natural gas reserves and plant cost data were given different values. In the DNE21 model, the 'macro economy model' and 'warming damage function' were integrated, and simulation was performed for verification. Using a standard model compatible with COP3 (Third Session of the Conference of the Parties to the United Nations Framework Convention on Climate Change), comparison was made between a case in which different CO2 emission constraints were imposed on the advanced area and developing area separately and a case in which one and the same constraint was imposed on the world as a whole, and calculations were made about CDM (Clean Development Mechanism). (NEDO)

  14. Report on a survey in fiscal 1999 for trends in policies on prevention of global warming by use of substitute fluorocarbons; 1999 nendo daitai furon no chikyu ondanka taisaku doko ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This paper summarizes mainly on HFC, PFC and SF{sub 6} the trends in the last one year in technologies and regulations that can make compatible the ozone layer protection and the global warming prevention. Activities of the HFC/PHC task force established jointly by TEAP and IPCC are very important in deciding the future positions of HFC, PFC and SF{sub 6}. This paper reports the status of activities taken during fiscal 1999. IPCC reviewed the method of calculating the quantity of greenhouse effect gas emission. The paper introduces from its draft the gist of calculating the discharge quantity of HFC, PFC and SF{sub 6}. Introduction is given from the HFC/PFC task force report the actual status of using coolants, foaming agents and aerosols using HFC, PFC and SF{sub 6}, and the trends of developing substitution technologies. The paper introduces a fluorocarbon destruction technology as an international trend in discharge suppression measures. The paper reports movements of COP-5 in fiscal 1999 for gases other than the three gases including HFC. Chlorobromo-methane was indicated as a new substance, and n-propyl-bromide was decided to continue with measurement of ozone destruction coefficient. (NEDO)

  15. Achievement report on development of global warming prevention related technologies in fiscal 1998. Development of HFC-23 destruction technology; 1998 nendo chikyu ondanka boshi kanren gijutsu kaihatsu seika hokokusho. HFC-23 hakai gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-01-01

    HFC-23 is produced as a by-product during HCFC-22 manufacturing (produced at by-production rate of about 2%, whereas the reaction control has limitation in reducing the production). This is one of the substances subjected to the greenhouse effect gas reduction in the climate change framework treaty. This paper describes the achievements in 1998 on developing the HFC-23 destruction technology. High-temperature pyrolysis decomposes the substance into HF and CO2, which are given absorption treatment by water and alkali to make them harmless, and are recovered finally as calcium fluoride. An equipment having the treatment capability of 195 kg/h was constructed. Design was made on a facility capable of treating fluorine containing waste water at 3 t/h at maximum. Utilities consumed in a factory (industrial water, acids for neutralization, and alkali) are used effectively to identify the effect of reducing the treatment cost. Discussions were given from the safety aspect on facilities to prevent leakage of fluorine containing waste water being a harmful substance. Fabrication was executed on a full-size treatment testing equipment that can utilize the utilities in the factory effectively, and trial equipment operation was performed to arrange the system prepared toward the future tests and researches. (NEDO)

  16. Research cooperation project in fiscal 1999. Research cooperation related to putting waste water treatment technologies into practical use to prevent global warming; 1999 nendo chikyu ondanka boshi haisui shori gijutsu no jitsuyoka ni kansuru kenkyu kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Joint research with Thailand has been performed by using a demonstration plant on decomposition and removal of organic substances contained in waste water generated from foodstuff factories, and on recovery of methane gas being the greenhouse effect gas. This paper summarizes the achievements in fiscal 1999. Performed in the former half of this fiscal year were fabrication of part of the devices used in the anaerobic treatment process, civil engineering construction of storage tanks and buildings for the aerobic treatment process, importation and fabrication of devices, installation of the entire facility, piping construction, and electric instrumentation construction. The construction to build the demonstration plant has been completed. Performed in the latter half of the year are the water operation, granule filling into each UASB reactor, charging activated sludge into the aerobic facilities, the trial operation 1 using the actual waste water (precipitation test) and the trial operation 2 (through flowing of actual liquid). The operation research is still in continuation. On the other hand, in the assistance research in the country, discussions were given on the granule activity evaluating and testing method, influence of granules on temperatures, water flowing test for restoration of activity of the granules stored under elevated temperatures and for an extended period of time, and properties of the transported granules. (NEDO)

  17. Fiscal 2000 research cooperation project on the research cooperation on practical application of wastewater treatment technologies for global warming prevention; 2000 nendo chikyu ondanka boshi haisui shori gijutsu no jitsuyoka ni kansuru kenkyu kyoryoku jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    A verification plant operation study is conducted in cooperation with Thailand over wastewater treatment technologies for effectively decomposing and removing organic matters contained in foods plant wastewater and for recovering methane gas therefrom. The effort aims to transfer to Thailand anaerobic wastewater treatment technologies for recovering methane gas. For the 3-year research that began in fiscal 1998, a verification plant was installed at Cho Heng Rice Vermicell Factory Co., Ltd., located 30 kilometers west of Bangkok City. In the first half of verification plant related operation studies for fiscal 2000, the plant was kept in operation for the determination of the optimum operating conditions, and operation/maintenance technologies were transferred to Thailand. In the second half, plant operation was studied for by-passing the ultimate sedimentation tank of the factory. The results of activities are summarized into seven chapters of (1) outline of research cooperation project implementation, (2) outline of project implementation in fiscal 2000, (3) verification plant operation study, (4) automatic monitoring system construction, (5) technology disseminating activities, (6) study of support in Japan, and (7) subjects for future discussion. (NEDO)

  18. Research cooperation project in fiscal 1998. Research cooperation related to putting waste water treatment technologies into practical use to prevent global warming; 1998 nendo chikyu ondanka boshi haisui shori gijutsu no jitsuyoka ni kansuru kenkyu kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Joint research with Thailand has been performed by using a demonstration plant on decomposition and removal of organic substances contained in waste water generated from foodstuff factories, and on recovery of methane gas being the greenhouse effect gas. This paper summarizes the achievements in fiscal 1998. In order to advance smoothly the adequate design and demonstration operation of the demonstration plant, investigations were performed on the water using conditions in the CHO HENG rice powder manufacturing factory, and on the waste water generating sources, and the latest waste water data. Visits and investigations were also given on business entities in Thailand as to their design capability, quality control, delivery time control and maintenance capability. In designing the demonstration plant, the basic process combining the anaerobic treatment and aerobic treatment was adopted, and the detailed design was made according to the results of operation of the pilot plant in the past. This fiscal year has performed civil engineering construction composed mainly of RC structures, and fabrication and installation of devices and facilities ancillary to different structures. Devices were fabricated in Thailand whenever possible, with some parts being imported from Japan. (NEDO)

  19. Research report for fiscal 1998. Research for 'New Earth 21' project implementation program preparation; 1998 nendo chosa hokokusho. 'Chikyu saisei keikaku' no jisshi keikaku sakusei ni kansuru chosa jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For the establishment of a CO2 measures introduction scenario which the world would accept, the latest information was collected, the DNE21 (Dynamic New Earth 21) model was improved, and simulation was reviewed. In fiscal 1998, simulation was performed for each district using an LDNE21 (Linear Dynamic New Earth 21) model, and an energy flow chart, energy balance table, and trade table were prepared and subjected to detailed deliberation. Studied were also conducted about the changes to occur in methanol production when the natural gas reserves and plant cost data were given different values. In the DNE21 model, the 'macro economy model' and 'warming damage function' were integrated, and simulation was performed for verification. Using a standard model compatible with COP3 (Third Session of the Conference of the Parties to the United Nations Framework Convention on Climate Change), comparison was made between a case in which different CO2 emission constraints were imposed on the advanced area and developing area separately and a case in which one and the same constraint was imposed on the world as a whole, and calculations were made about CDM (Clean Development Mechanism). (NEDO)

  20. Building life utilizing nature's power and friendly to earth. New energy vision in Kami Ishizu Town (Gifu Prefecture); Shizen no chikara wo ikashi chikyu ni yasashii kurashi wo tsukuru. Kamiishizucho shin energy vision

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Energy saving and new energy introducing measures were established as the 'utilization of area discrete type new energy technology that can be a model for other districts' as part of the plan in Kami Ishizu Town, the 'creation of nature-rich housing area'. The introduction measures were established by the activities of the establishment deliberation meeting composed of people of experience and academic standing, the introduction discussing committee composed of relevant section managers in the municipal office, and the working teams composed of the young staff. The plan begins in fiscal 2001 and lasts for 15 years. The activities are divided into the preparatory period, the foundation building period, and the developing expansion period, wherein the introduction plans were set for bio-mass energy, wind power energy, and hydro-energy that constitute the major resources. The activity achievements were put into order by the following four items: 1) foreword, 2) circumstances centering on the new energy introduction, 3) the current status of Kami Ishizu Town, and 4) the guideline for new energy introduction in Kami Ishizu Town. In Item 2, the district characteristics and the status of existence of new energies were put into order to evaluate the energies available from bio-mass, wind power, hydropower, and solar power. (NEDO)

  1. Report on a survey in fiscal 1999. Survey on the actual state of utilizing unified evaluation models for global warming; 1999 nendo chikyu ondanka ni kansuru togo hyoka model no katsuyo jittai ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The present survey is intended to compare and analyze major unified global warming evaluation models available inside and outside the country, and analyze the directionality on supports for the future model developments that will be performed by the Ministry of International Trade and Industry. The report describes in Section 1 how the summaries of the global warming evaluation models may be put into order. A unified evaluation model may be positioned basically as a platform to unify the processes of recognizing scientific problems and the processes of determining the policies. Section 2 describes how the summaries of the major global warming evaluation models may be put into order. The models include the followings: DNE21 (Dynamic New Earth 21), GRAPE model, AIM model, MESSAGE (IIASA) model, IMAGE2 (RIVM), and GREEN (Gene Ral Equilibrium Environment)(OECD). Section 3 summarizes the purposes, general situation of development, scope of the objects, and technological features as the features of each model. Section 4 describes the analysis of the actual state of utilizing unified evaluation models for global warming. The results of the analysis were put into order in a map form to make clear the positioning of the major models that have been put into order. (NEDO)

  2. Fiscal 1997 survey report on the trend of global warming protection measures of substituting freons; 1997 nendo chosa hokokusho (daitai freon no chikyu ondanka taisaku doko ni kansuru chosa hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The trend survey was conducted of global warming protection measures by participation in international conferences, scientific society meetings and lecture meetings, and by literature surveys. We participated in the international conference on ozonosphere protection measures. In the 9th meeting of the nations which concluded the Montreal Protocol, the strengthening of restrictions on methyl bromide was decided on. In the UNEP solvent technology selection conference and the OORG conference of the World Bank, reports were made on substituting solvents in Japan, activities supporting developing countries, and the developmental trend of urethane use foaming agent. In the international conference on ozonosphere protection measures, introduced were the present status of Japan`s ODA for developing countries and examples of success of the substitution in the solvent field. The paper included nine reports on CFC destruction technology related literature made public in the past one year. The paper also introduced a comparative study of de-HCFC substituting technology at U.S. Oak Ridge National Laboratory, U.S. EPA`s prediction of emission of fluorine 3 gas, the predicted value of HFC emission and trial calculation of contributing rate in all greenhouse gases by IIR, Green Peace and Elf Atochem, and NOAA`s measured data on SF6 in the atmosphere. 49 refs., 46 figs., 26 tabs.

  3. Fiscal 1999 survey report. Study project concerning preparation for implementation plan of 'the new earth program'; 1999 nendo 'chikyu saisei keikaku' no jisshi keikaku sakusei ni kansuru chosa jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This paper reports fiscal 1999 survey of the new earth program. Toward the target of GHG (green house effect gasses) 550 ppm, sensitivity analysis using a linear DNE21 model was replenished, with model analyses made on a scenario concerning the countermeasure technologies/systems. In other words, performed were the improvement of accuracy by the renewal of data, sensitivity analysis concerning CO2 collection/processing technology and nuclear energy, analysis of the international regulation for controlling CO2 concentration under 550 ppm in the air in the year 2100, and sensitivity analysis on increase in per capita energy demand in Asia. Overall assessment of global warming problems was upgraded for the purpose of enabling the assessment from the consumption maximization point of view, taking into consideration cooling effects of SOx and economic growth. Potentiality assessment in rational use of energy was reexamined because energy conservation played an important role. That is, in DNE model, the data were examined of OECD signatories and developing countries from 1970s concerning natural gas, petroleum, coal and electric power, with the long-term cost flexible value estimated. In addition, feasibility was assessed of rational use of energy from energy GNP unit. (NEDO)

  4. Survey on hydraulic power resources. Survey plan (draft) (For clean energy of the future generations); Chikyu kibo suiryoku shigen chosa chosa keikakusho (an). Mirai no sedai ni clean energy wo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-03-01

    Promotion of development of hydraulic power and others as fossil fuel alternative energy sources is one of the most important measures for solving the global environmental problems. This draft plan proposes, first of all, to conduct surveys on hydraulic power resources on a global scale, to collect the basic data for development of the energy sources. It is estimated that developed hydraulic power resources account for approximately 14% of the total developable resources, the remainder being left untouched. By region, these percentages rise to approximately 55 and 45% in North America and Europe, respectively. These percentages in Asia, Africa, Latin America and FSU are significantly lower, and their undeveloped resources are estimated to total approximately 6 times as large as those already developed worldwide. It is expected that the hydraulic power resources are surveyed on a 10-year plan (1991 to 2000) with a total budget of 30 billion yen, to collect the data and establish the databases in cooperation with international organizations, e.g., UN organizations, regional organizations (e.g., ASEAN organizations) and newly founded organizations. (NEDO)

  5. FY 1998 annual summary report on recent trends of global warming prevention measures with fluorochlorohydrocarbon alternatives; 1998 nendo daitia furon no chikyu ondanka taisaku doko ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Described herein are the recent trends of the ozone layer protection and global warming prevention measures. Latest international information has been collected by attending the 10th Meeting of the Party of Montreal Protocol, and the 17th and 18th Open Ended Working Group. The important decisions made so far are investigation on the novel ozone layer destruction substances, requirement of studying on decommissioning Halon facilities, collection of information of HFC and PFC, and reporting to IPCC. Information regarding regulation trends of HFC, PFC and SF{sub 6} are collected by attending the COP-4 meeting and the preparatory meetings therefor. The report on these 3 substances will be completed in July or so, 1999. The trends of technical development in HCFC alternatives in refrigeration and blowing sectors were investigated. HFC-245fa and HFC-365mfc are introduced. Also introduced is latest information regarding the emission estimation and control measures of HFC in USA and UK, emission control measures of SF{sub 6} in USA and Japan, and techniques for destruction of CFC and the like, which could be the basic techniques for controlling diffusion of HFC. The CFC phase-out programs of China, the biggest ozone layer destruction substance (e.g., CFC) consuming country, are also outlined. (NEDO)

  6. Report on a survey in fiscal 1999. Analysis of English literatures related to unified evaluation models for global warming; 1999 nendo chikyu ondanka togo hyoka model kanren eibun shiryo no bunseki choa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This paper summarizes the basic materials related to unified evaluation models for global warming. The unified evaluation is a disciplinary process to combine, interpret and share the information from different scientific disciplinary areas in such a form that the whole cause and effect chain can be evaluated from a macroscopic view. The process has higher utilization value than the evaluation overemphasizing a single academic area, and can provide decision makers with useful information. The process is suitable to model complex interactions and feedback mechanisms in diversified scenes such as climate change. The unified evaluation can identify the policy criteria along with a measure framework having consistency. The evaluation process is repetitive and continuous, wherein a science community can convey comprehensive knowledge and finding to a decision making community. In turn, the decision making side can feed back the experiences and achievements in learning. Execution of the evaluation requires different approaches, such as judgement of specialists including the modeling methods and experience, discovery as a result of applying the policies, and survey methods. The paper also describes the gaming conception, scenario analysis, and unification evaluation methods. (NEDO)

  7. Fiscal 1993 study of engineering for making areas prosperous using natural energy; 1993 nendo kankyo chowagata green techno system no kokusai kyoryoku model ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    The paper studied the engineering for activating areas using natural energy. A system has started in which electric power companies purchase surplus electric power from the natural energy use power generation such as the wind power and photovoltaic power generation, etc., and a lot of local self-governing bodies in the country plan `projects to promote town` using the system. However, few engineers and makers can plan `a project to promote town,` making effective use of natural energy which is fickle. Therefore, first, the paper arranged the actual status mostly of the cases of `the projects` using natural energy which have been carried out in the country. Next, the trend of the natural energy utilization technology in countries including the U.S. was described. Moreover, assuming model areas in Japan for working out a concept of model projects on the natural energy utilization and town promotion, a concept was proposed making full use of the utilization technology which has now usability. Arrangement is being made for conditions for the full scale spread as seen in the subsidy system for general users. 3 refs., 176 figs., 61 tabs.

  8. Report on achievements in fiscal 1998. Survey on environmental effects from photovoltaic power generation systems; 1998 nendo daikibo taiyoko hatsuden system no kankyo eikyo ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Different environmental effects may be assumed when large-size photovoltaic power generation systems are installed in vast unutilized lands including deserts. Knowledge having been acquired to date has been put into order on the following subjects as the pre-survey thereon: (1) environmental characteristics of desert areas, (2) discussions on environmental effects from (a) environmental assessment viewpoints, (b) contents of the environmental assessment, and (c) environmental assessment institutions, and (3) the survey policy. In discussing the environmental characteristics, it is revealed that desert areas are neither sterile nor unused, but pasturage and agriculture have been carried out in historical and traditional ways. In discussing the environmental effects, it was recognized that surveys on primary and secondary effects on the environmental are indispensable. With regard to the institutions, there are countries who have and have not the institutions even among the OECD member states. In addition, it was known that environments in the desert areas vary greatly according to the particular areas, whereas there are possibilities of installing the facilities because the effects of the facility locations on the environment are various. Therefore, it was decided to start from the case studies in locations of different types. (NEDO)

  9. Report of the researcher exchange promotion project on the environmental issues in the Asia-Pacific region; Asia/Taiheiyo chiiki kankyo mondai kenkyusha koryu sokushin jigyo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Proposals have been made for the establishment of a network (ETERNET-APR) linking those involved in the research and development of environmental technology in the Asia-Pacific region in order to limit the environmental impact of industrial activity. By pursuing active exchanges of information and personnel, researchers in environmental technology in the Asia-Pacific region have been making serious efforts to establish such a network. This fiscal year, the Internet Web site of the ETERNET-APR has been created using the data collected to date. This database includes information on some 350 researchers and 200 research projects from seven countries. The first international symposium was successfully held at Environmental Research Institute of Chulalongkorn University in Thailand (ERIC), hosting 200 environmental researchers from 10 countries in the Asia-Pacific region. Tripartite sister laboratories ties among the National Institute for Resources and Environment (NIRE) and three Korean laboratories were forged. The sister laboratory project between ICETT and ERIC is also proving effective. These successes prove that intraregional joint research, the objective of ETERNET-APR, has begun to take shape in this year

  10. Study on the creation of inorganic materials using micro-gravity environment; Bisho juryoku kankyo riyo muki zairyo no sosei kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Creation of new functional inorganic materials using micro-gravity environment was studied. Observation of an electrode interface phenomenon under micro-gravity clarified that time variation in interference fringe is dependent on current density and electrode thickness in ground experiment, while it is dependent on not electrode thickness but current density under micro-gravity. In fabrication of glass fine particles under micro-gravity, true spherical glass fine particles of 4-7{mu}m in size were obtained corresponding to a charge of 40mg by evaporation and solidification of sodium tellurate glass as raw material under micro-gravity. In fabrication of non-harmonic Pb-Zn system alloy, the homogeneous alloy texture of 5{mu}m level was observed which has never been observed in previous metal phase diagrams by fusion of 80atom%Pb-20atom%Zn mixture under micro-gravity and quenching from 500degC. On the study on fabrication of spherical semiconductor crystals, 7 spherical Si single crystals of 300{mu}m in size were obtained. 12 refs., 48 figs., 2 tabs.

  11. Development of an observation robot `Flying Fish` for comprehensive measurements of ocean environment; Kaiyo kankyo sogo kansoku robot `flying fish` no kaihatsu kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Koterayama, W.; Yamaguchi, S.; Nakamura, M. [Kyushu Univ., Fukuoka (Japan). Research Inst. for Applied Mechanics; Akamatsu, T. [Mitsubishi Heavy Industries, Ltd., Tokyo (Japan)

    1996-06-01

    A high speed towed type physical and chemical observation marine robot named as `Flying Fish` has been developed since 1992, which can measure chemical substances in the sea as well as physical data, such as flow velocity of the ocean and water temperature. This paper describes its formation, designing, control system, and results of ocean tests. For the space continuous observation of physical, chemical, and biological quantities, it is essential to control the depth, pitch, and roll. The wing control method was employed for this robot. As a result of the ocean tests, the following conclusions were obtained. The accuracy under the steady state was {plus_minus}0.05 m in the depth, {plus_minus}1 degree in the pitch, and {plus_minus}0.5 degree in the roll. This was stable enough to operate chemical analysis, such as dissolved oxygen analysis. Even under the unsteady state during the change of depth, the pitch and roll were controlled in {plus_minus}3 degree and {plus_minus}0.5 degree, respectively. Results of the field tests and the numerical simulations for the performance of this robot were agreed well mutually in the practically sufficient accuracy. 10 refs., 15 figs., 2 tabs.

  12. Achievement report for fiscal 1998. Development of environmentally friendly universal controller; 1998 nendo kankyo taio universal controller no kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    Research and development was carried out for an 'environmentally friendly universal controller (UC)' which would be 'user-friendly and energy-saving' when used with electrical home appliances. An environmentally friendly UC is a remote controller which utilizes an infrared two-way communication function and becomes capable of dealing with any appliance upon downloading remote control information from the appliance involved. Studies were conducted for the development of controller hardware and software therefor and for the development of electrical home appliances to correspond to their specifications. In relation with energy conservation, studies centered about reduction in power consumption while on standby and unnecessary power consumption. As the result, an environmentally friendly UC protocol was newly developed and, based on the protocol, plural numbers of controllers, appliances, and network gateways were tentatively fabricated, and were examined for their function, behavior, and operational interchangeability. Systems aiming at reducing power consumption while on standby and unnecessary power consumption were built by way of experiment, and were checked for performance. It was then concluded that a reduction of several billion kWh might be achieved. (NEDO)

  13. Study on the impact assessment for the life cycle assessment (LCA); Kankyo fuka bunseki ni okeru impact assessment ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This report describes the impact assessment which is an important step for LCA. For classification of the impact assessment, the existing literature was reviewed and a skeleton for the classification was proposed. The weighting factors for nine selected impact categories, which were used to calculate environmental load point (ELP) for the valuation, were obtained for two overseas groups, i.e., students of Amsterdam University and SETAC Europe members. It was found that the former provided the similar trends to general Japanese, however that the latter gave high weighting in the global warming and depletion of ozone layer. The ELP was proposed and applied to automatic washing machine, coffee maker, waste incineration power generation system, and co-generation system. As a result, its effectiveness was demonstrated. This report also describes problems for the LCA of thermal and material recycling of PS trays. 99 refs., 96 figs., 73 tabs.

  14. Takane new energy vision. Creation of life environment with affluence using natural energies; Takane shin energy vision. Shizen energy wo ikashita yutakana seikatsu kankyo no sozo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-02-01

    A new energy vision was established that discusses how the way the new energy introduction consistent with district characteristics should be, and has at the same time the leadership and specificity. Takane Town in Yamanashi Prefecture is a town located in the south skirt of Mt. Yatsugatake, having a population of about 9400 and households of about 3200. The town consumes energies converted into petroleum of about 19,000 kL/year. The activity achievements were put into order by the following five items: 1) what is the new energy vision?, 2) district characteristics, 3) the basic plan, 4) plans placed with emphasis, and 5) promotion of the vision. Item 4 includes introduction of new energies into the welfare, education and cultural facilities, utilization of bio-mass energy using livestock resources, introduction of new energies into the Hananomori Park at South Yatsugatake, introduction of clean energy fueled automobiles, and small hydropower generation utilizing clean streams in the Kiyosato area, introduction of new energies into the Kiyosato Station square, introduction of next generation agriculture utilizing new energies, and communications with nature and ecology of Takane Town. (NEDO)

  15. Report of 'Survey on Asian environmental information networks'; 'Asia kankyo joho network chosa' ni kansuru hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    This project is implemented to survey the current statuses and future trends of the Asian district environment-related information networks, for the (research cooperation project for development of environmental condition measuring laser radar systems), being promoted by NEDO. First, current statuses of the network names, managing organizations, user numbers, conditions of use, protocols for use, service conditions, major domestic nodes and internationally connected conditions are surveyed mainly for internet-connected networks, for surveying the current statuses and future trends of the research networks in Asian countries. Second, current statuses in Indonesia of the network names, managing organizations, user numbers, conditions of use, protocols for use, service conditions, domestic node sites and managing organizations, charge systems and institutions, types/reliability/ stability of the circuits, and conditions of restriction of use, if any, for surveying the current statuses and future trends in Indonesia. Third, conditions of and needs for network utilization by researchers for Asian district environments. (NEDO)

  16. To the fusion of age - economy and ecology of the ring industry revolution; Kankyo kakumei no jidai {approx}ekonomi to ekoroji no yugo he

    Energy Technology Data Exchange (ETDEWEB)

    Akaike, Manabu

    1999-05-31

    What has suddenly been noticed as a keyword of the durable industry creation in which the ecology is made to be compatible with the economy is a philosophy of {sup t}he bio region (the life regionalism){sup .} As the concepts of region management desired at present, the philosophy of bio region which is the thought of the next generation development which I notice at present most roots in the place where selves live, and it aims at uniting with the region. In the reason, it is required that natural resources such as climate, land form, basin, soil, microorganism, flora and fauna, resources that the region has are utilized maximally. (NEDO)

  17. Fiscal 1998 survey report. Survey on method of environmental-impact assessment in wind power development; 1998 nendo furyoku kaihatsu ni okeru kankyo eikyo hyoka shuho chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    With the purpose of preparing the main points of 'environmental-impact assessment guidelines for wind power developments (draft)', examples of environmental-impact assessments, related laws and regulations in Japan and abroad were collected, and rearranged in respect to requirements in environmental-assessments, concrete procedures, survey/projection/assessment method, summarisation of results, etc. It was clarified, for example; in a large-scale wind power development, it can be dealt with by choosing items and contents on the assumption that a land area is developed; in a small-scale development, there is basically no need of considering the possible effect of the construction work; and, as far as noise, vibration and the ecosystem (plants/animals) are concerned, however, the characteristics of the site be taken into consideration. Objects for general assessment are noise, low-frequency air vibration, radio wave interference, the ecosystem (plants and animals) and the landscape. The guideline draft is constituted of (1) basic items, (2) overview of the area, (3) determination of items for environmental-impact assessment and (4) research, prediction, assessment, conservation measures and follow-up research; in the basic items, importance of preliminary consideration was emphasized, as were priority/simplification, implementation of environmental conservation measures, and implementation of follow-up research. (NEDO)

  18. Investigations on an environment friendly chemical reaction process (eco-chemistry). 2; Kankyo ni yasashii kagaku hanno process (eko chemistry) ni kansuru chosa. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    In order to structure a chemical reaction process that does not discharge a large amount of waste by-products or harmful chemical substances, or so-called environment friendly process, investigations and discussions were given based on the results derived in the previous fiscal year. A proposal was made to reduce environmental load on development of oxidized and dehydrogenated catalysts that can produce selectively ethylene, propylene and isobutylene in an oxidation process. In liquid phase oxidation, redox-based oxidation and solid catalyzation of automatic oxidation reaction were enumerated. In acid base catalyst reaction, development of ultra strong solid acid was described to structure no pollution discharging process. In the fine chemical and pharmaceutical fields, the optical active substance method and the position-selective aromatics displacement reaction were evaluated to reduce environmental load. A questionnaire survey performed on major chemical corporations inside and outside the country revealed the following processes as the ones that can cause hidden environmental problems: processes discharging large amount of wastes, processes treating dangerous materials, and processes consuming large amount of energy. Development of catalysts is important that can realize high yield, high selectivity and reactions under mild conditions as a future environment harmonizing chemical process. 117 refs., 23 figs., 22 tabs.

  19. FY1995 study of design methodology and environment of high-performance processor architectures; 1995 nendo koseino processor architecture sekkeiho to sekkei kankyo no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The aim of our project is to develop high-performance processor architectures for both general purpose and application-specific purpose. We also plan to develop basic softwares, such as compliers, and various design aid tools for those architectures. We are particularly interested in performance evaluation at architecture design phase, design optimization, automatic generation of compliers from processor designs, and architecture design methodologies combined with circuit layout. We have investigated both microprocessor architectures and design methodologies / environments for the processors. Our goal is to establish design technologies for high-performance, low-power, low-cost and highly-reliable systems in system-on-silicon era. We have proposed PPRAM architecture for high-performance system using DRAM and logic mixture technology, Softcore processor architecture for special purpose processors in embedded systems, and Power-Pro architecture for low power systems. We also developed design methodologies and design environments for the above architectures as well as a new method for design verification of microprocessors. (NEDO)

  20. Report on surveys in fiscal 1999 on research and development of the environment harmonizing catalyst technology; 1999 nendo kankyo chowagata shokubai gijutsu no kenkyu kaihatsu chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This paper reports the surveys in fiscal 1999 on research and development of the environment harmonizing catalyst technology. The discussion subjects taken up included suppression of discharge of carbon dioxide, catalysts used when manufacturing hydrogen and technology thereof, and environment purifying catalysts to decompose harmful substances, and technology thereof. The roles of catalysts and their technologies are expected in reducing the reforming temperatures, achieving energy saving, and reducing decomposition energy. Furthermore, the catalysts are expected of high activity, long life and low cost. Three themes were selected from the emergency and importance points of view. The themes are, in the consumer field, research and development of efficiency improvement in membrane reactors for reforming low-grade hydrocarbons to structure a technology to manufacture hydrogen for small-size portable fuel cells; and in the industrial field, development of hydrogen and carbon product manufacturing technologies with which CO2 generation is suppressed by means of the catalytic decomposition process. In practice, for such discharged harmful substances as dioxins, PCB and volatile organic compounds (VOC), treating them is the urgent environmental problem, and therefore, the fundamental research was taken up for practical application of the second-generation catalysts of the ultra-violet light and visible light responding type. (NEDO)

  1. International symposium on environmental impacts of advanced alternative to CFC; CFC shinki daitai busshitsu no kankyo eikyo ni kansuru kokusai symposium hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-07

    The international symposium on environmental effects of new CFC substitutes was held in Tsukuba City, Ibaraki Pref. on February 7-9, 1996, and 19 papers were made public. In Session 1 (Plenary lecture), reports were made on Global warming and climate change: a review of recent studies; Stratospheric ozone, CFCs, and CFC-substitutes: an update, etc. In Session 2, Measurements of OH rate constants for advanced refrigerants as well as HCFCs and HFCs; The reaction rate of CFC alternatives with OH radical; Experimental and estimated rate constants: reactions of hydroxyl radicals with several halocarbons, etc. In Session 3, Measurement of uptake coefficients of some acetyl halides and fluorinated ethers into water; Mass transfer at the air/water interface: removal processes of halocarbonyl compounds; Heterogeneous reactions of fluorinated ethers on allophane or titanium dioxide, etc. In Session 4, papers were reported on model calculations relating to the global warming.

  2. Evaluation of corrosivity of the vapor-phase environments to sterilized water with chlorine; Enso kei mekkin shorisui no kisho kankyo no fushokusei

    Energy Technology Data Exchange (ETDEWEB)

    Nakata, Michio. [Nippon Steel Corp. Yamaguchi (Japan). Technical Development Bureau

    1999-08-15

    Corrosivity of vapor-phase aenvironments in indoor pool, water thank, and water purification plants was investigated. Sodium hypochlorite (NaClO) was used as a sterilizing agent in indoor pool, while chlorine gas was used in water tank and water purification plants. It was found that Cl{sup -} ion were concentrated in the dew formed in the indoor pool. H{sup +} ions as well as Cl{sup -} ions were accumulated in the dew dormed in the water tank ans water purification plants. Thus, the corrosion condition was varied with the type of sterilizing agents used. Through the investigation of water tanl, the relationship between pH and Cl{sup -} ion concentration was given as follow; pH=-1.09-2.19 log [Cl{sup -}] (mol/L). Corrosivity of vapor-phase enviroments in sterilizing water systems would be characterized by the exstence of oxidizing chemical agents such as ClO{sup -} and HClO, the shift of corrosion potenrial of the thin water film, and the accumulation of H{sup +} and/or Cl{sup -} ions in the dew. (author)

  3. Survey on synthesis and reaction of environmentally benign water-soluble metal complex catalysts; Kankyo chowagata suiyosei sakutai shokubai no gosei hanno no chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This report describes the research trend survey results on the synthesis and reaction of water-soluble metal complexes which are regarded as environmentally benign catalysts. For the synthesis and catalysis of water-soluble complexes, synthetic methods of water-soluble phosphines, such as sulfonated TPPMS and TPPTS, are described in detail. Synthesis and reactivity of hydroxymethylphosphines are introduced, and the application of electrospray mass spectroscopy is elucidated as a tool for the analysis of them. Changes of the application of transition metal complexes with water-soluble phosphines to catalysis are described. Dual catalysts which have both functions of phase transfer catalysts and homogeneous catalysts are introduced. Concept of counter phase transfer catalysts is also introduced, and some catalytic reactions are described. In addition, this report introduces catalysis of water-soluble polymer-supported metal complexes, immobilization of metal colloids with water-soluble ligands and their analysis, and water-soluble complexes as hybrid catalysts. 144 refs., 94 figs., 10 tabs.

  4. Research and development of environment measuring laser radar. 6. Follow-up; Kankyo keisokuyo laser radar no kenkyu kaihatsu. 6. Follow up

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    In an effort to extend cooperation for reducing pollution in urban areas in the Asia-Pacific Region, a laser radar system was constructed in the city of Djakarta, Indonesia, in 1996, and a follow-up started in fiscal 1997. The aim is to collect information necessary for atmospheric environment improvement through observing pollutant distribution and movement in the upper atmospheric layers over the city. Mie-scattering lidar (laser infrared radar) observation has uninterruptedly been on since the summer of 1997, the system collecting data about Djakarta's atmospheric boundary structure throughout the year. The data indicate great changes in the atmospheric boundary structure between the dry and rainy seasons. The result of intensified observation conducted in the dry season shows that the altitude that the mixed layer reaches in the inland region is higher in the daytime and lower in the nighttime. It is necessary to compare the result with atmospheric pollution data collected on the ground surface and determine the relationship between the behavior of pollutants and the circulation of land-and-sea breeze. The data of September, 1997, reveal an aerosol layer at altitudes of 2km and higher, and this is attributed to forest fires. The result of intensified observation conducted in the dry season of 1998 is also stated. (NEDO)

  5. Ecological concepts in recent polymer technology. Part4. Eco-friendly water-absorbing polymer; Kankyo ni chowa shita kyusuisei kobunshi

    Energy Technology Data Exchange (ETDEWEB)

    Kunioka, M.

    1997-07-01

    As an application example of water-absorbing polymers with biodegradability, it was expected to be applied to soil improvement agents used in planting trees in deserts, besides physiological napkins, paper diapers and medical materials. In this paper, water-absorbing polymers with biodegradability such as natural polymers, petroleum-made polymers and polymers synthesized by radiation cross-linking and chemical cross-linking were introduced. Moreover, a kind of water-absorbing polymers developed by the authors, made from polyamino acid synthesized by microbes, was introduced. In the method developed by the authors, the cross-linking structure could be made by combining PGA carboxyl groups and various amino groups of diamine using carbimide with water solubility. As for this method, all of reactions could be conducted in water and catalytic replacement was not necessary, moreover, hydrogel with the water-absorbing rate of 200 to 1500 times could be produced. 44 refs., 3 figs., 1 tab.

  6. New energy vision at Sabae City. Toward realization of 'environmental international city'; 2001 nendo Sabae shi chiiki shin energy vision. Kankyo kokusai toshi Sabae no jitsugen ni mukete

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-03-01

    With an object of accelerating introduction of and uplifting consciousness on new energies at Sabae City in Fukui Prefecture, a new energy vision was put into order based on the result of the initial stage investigation having been performed in the previous fiscal year. Solar light and solar heat energies will be introduced positively into public facilities, and at the same time works will be implemented to accelerate the proliferation thereof into general households. The target of introduction by the year 2010y is set to 2,600 kW by photovoltaic power generation, and the introduction thereof is planned to schools, nursery schools, municipality operated houses, and unattended facilities. With regard to solar heat water warmer, the present proliferation rate of about 7.3% will be raised to 15%. Regarding wastes generated from industrial areas, efficient energy extraction by thermal recycling is intended on the assumption of suppression of wastes generation, their re-use, and recycling. Systems may include the bio-gas system, cogeneration, and recovery of energies from plastics wastes. For acceleration of proliferation of new energies in general, promotion of introduction will be achieved on mini-wind power generation, small hydroelectric power generation, and fuel cell automobiles. (NEDO)

  7. Research and development cooperation project on environmental measurement using laser radar in fiscal 1994; Kankyo keisokuyo laser radar no kaihatsu ni kansuru kenkyu kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    The paper outlined activities in fiscal 1994 in the R and D cooperation project on a laser radar for environmental measurement. In the activities in fiscal 1994 of `the ODA laser radar development committee,` the committee held four meetings, two field surveys were carried out, and two researchers were invited from Indonesia. In the field survey, the environment in Jakarta city was investigated in terms of changes in population and number of the cars registered. Further, from data collected during 1994-1998 in the central Jakarta city, the following were made clear: the trend of a decrease in SO2, the trend of a rapid increase and an excess of NO2 content over the environmental standard, the status of pollution of which the level is close to the upper limit of the environmental standard of dust, etc. In the meeting of the policy study for the field survey at LIPI headquarters, Japan proposed a system which is constituted of a difference absorption laser radar, two Mie scattering laser radars, and a central processing unit. The sites proposed were studied in cooperation with Indonesia. 40 refs., 65 figs., 9 tabs.

  8. Research and development cooperation project on environmental measurement using laser radar in fiscal 1993; Kankyo keisokuyo laser radar no kaihatsu ni kansuru kenkyu kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    As one of the international research cooperation projects, the research cooperation in developing laser radar for environment measurement started between Japan and Indonesia. The project is scheduled to be carried out in a 4-year plan starting fiscal 1993. In fiscal 1993, conducted were negotiations with Indonesia on its implementation and a field survey. Between January 6 and 15, 1994, the first field survey was made in terms of topography, climate, road network and traffic situation of Jakarta city, and the proposed sites for installation were reported. The paper also introduced the reception system on the Indonesian side and a request for technical learning through stay in Japan. The second field survey was conducted between February 27 and March 6, 1994. Indonesia requested that they want to make laser radar observation not only for the local area, but the one that covers industrial areas, central urban areas and residential areas. Incidentally, there was an opinion that it is important to elucidate the pollution mechanism. 19 refs., 43 figs., 6 tabs.

  9. Achievement report for fiscal 1998 in developing environment corresponding universal controller (Individual report edition); 1998 nendo kankyo taio universal controller no kaihatsu seika hokokusho. Kobetsu hokokuhen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    Research and development has been performed on an 'environment corresponding universal controller (UC)' that realizes 'easiness of use and energy conservation' in correspondence with household electric appliances. This paper summarizes the reports by themes. The summarized development themes include: 'development of a bi-directional controller and TV interface', 'development of a bi-directional remote controller, an infrared ray to radio converter, and an air conditioner corresponding to the bi-directional remote controller', 'development of a UC corresponding air conditioner, and electric power cable transporting gateway', 'development of a universal controller and a control box', and 'development of an energy saving wiring system for the UC remote controller'. This paper also summarizes the works done by research participating departments of each corporation, such as development of UC corresponding video and TV sets (Sanyo Electric), development of UC corresponding TV sets (Toshiba), development of a UC corresponding DVD player (Japan Victor and Victor Techno-brain), and development of a UC relay box and a control box for the existing HA system (PANA R and D). (NEDO)

  10. Research report. Environmentally friendly energy community research business for Fujieda district (Refuse energy utilization); Fujieda chiku kankyo chowagata energy community chosa jigyo (haikibutsu energy riyo shisetsu) chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    An environmentally friendly refuse energy utilizing business, for which RDF (refuse derived fuel) produced out of wastes discharged by industries belonging to a Fujieda city environmental protection council will provide the heat source, is proposed by the said council. The proposal is subjected to a study, a basic plan is drafted, and a decision is made on its profitability. In the study, surveys are conducted on the actualities of wastes and of demand for heat, and specifications are worked out relating to transportation and storage of RDF, production of steam by an RDF-fired boiler, routing of pipes for transmitting the steam to the industries in the district, facility costs, operating costs, etc. It is found that the amount of RDF produced out of the wastes discharged by the council member industries is so small that it can meet the demand of only one industry and that, even if more wastes are collected from a wider area, the increased amount will but meet the demand of two industries and a hot water pool. It is found that the system will be economically feasible, however, if the shortage of RDF-generated energy is covered by an oil-fired boiler and thereby impartiality is established in steam distribution and steam production unit price is reduced. In view of the intensification of control over dioxin, etc., the business will be gaining profit in 2002 and after. (NEDO)

  11. Assessment of global environmental impacts by utilizing methodology of LCA on solar water heater for dwellings; LCA shuho ni yoru taiyonetsu onsuiki no kankyo fuka hyoka

    Energy Technology Data Exchange (ETDEWEB)

    Kamoshida, J [Shibaura Institute of Technology, Tokyo (Japan); Asai, S [Yazaki Corp., Tokyo (Japan)

    1997-11-25

    CO2 emission was quantified through the life cycle of a solar water heater to assess its environment impact. Although LCA (life cycle assessment) originally sums up I/O of all materials and energy through the whole life cycle of a product to examine environment impact, this assessment was carried out for only CO2. Calculation of CO2 emission assumed a natural circulating solar water heater of 200 l in effective hot water capacity, 2.78m{sup 2} in effective collecting area, and 0.5 in average annual collecting efficiency of total solar radiation, and an auxiliary city gas heat source for compensating insufficient heat quantity. The total CO2 emission in the life cycle of a solar water heater was obtained from an industrial association table assuming the life cycles of 10 and 20 years. CO2 emission was estimated to be 5407.1kg-CO2 and 10665.2kg-CO2 for 10 and 20 years, respectively. CO2 emission due to city gas was largest in the total CO2 emission in the life cycle. As a result, for reduction of CO2 emission due to a solar water heater, improvement of equipment efficiency was most important. 6 refs., 5 figs., 3 tabs.

  12. Activity of environmental, safety and hygiene on Dainippon Ink and Chemicals, Inc., Tokyo plant; Dainippon Ink Kagaku Kogyo (kabu) Tokyo kojo no kankyo hoan katsudo

    Energy Technology Data Exchange (ETDEWEB)

    Nagai, T. [Dainippon Ink and Chemicals, Inc., Tokyo (Japan)

    1998-06-15

    This plant exists along Route 17 in Itabashi-ku, Tokyo adjacent to Saitama prefecture, and started operation in Nov. 1937 to produce printing ink, varnish for ink, paint for cans, paint for PCM and paint for incombustible building materials. Five hundred employees and more than 100 stationed workers from cooperative companies work in the plant. Disasters of the plant are drastically on the decrease. The plant achieved a non-disaster duration of nearly 9.7 million hours, and no accidents and disasters for nearly 10 years at the end of Feb. 1997. Safety and quality control are in promotion by top-down system through the organization and bottom-up activity by small groups. The experience meetings of safety and QC circle activities are held in spring and autumn every year to spread the results among employees. In addition, selective activities are made by top-down system at marked points to prevent accident and disaster, and a mannerism in circle activity. Environmental ISO was also introduced for further improvement of an environmental protection control system. 1 fig.

  13. Survey report on an environmental harmony type production system of chemical products; Kankyo chowagata kagaku seihin seizo system ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    As part of establishing an environmental harmony type production system of chemical products, study and survey were made on PET bottles. Using the life cycle analysis method (LCA), a study was made for proposing a material recycle (MR) method which is environmentally and economically excellent in the stage of recycling waste PET bottles. The total cost of recycling can be reduced by 34% supported by a decrease in equipment cost and improvement in yield if there is no mixture of foreign substances such as aluminum caps and PVC bottles. However, the ratio of the amount obtained from the reduction to the total production cost is small, and it is necessary to take measures from a viewpoint of the cost in a total production process and environmental loads. In a survey in Kawaguchi city, PET bottles discharged from the business sector occupied 41% of all the discharge amount. In a survey in Yokohama city, very important data were obtained on PET bottles appointed as the second type under the recycle law. The quality of PET bottles to be brought to the recycling plant is important for effectively processing PET bottles in MR method. For achievement of MR which is low in cost and small in environmental load, needed were cooperation by citizens, the shipping management system in autonomous government, and changes in design and material quality to be made by the industrial circle. 8 refs., 64 figs., 68 tabs.

  14. Fiscal 2000 report on result of project for promoting exchange of international environmental technology information; 2000 nendo kankyo gijutsu kokusai joho koryu sokushin jigyo seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    With the purpose of sharing environmental technology information of the APEC countries, the homepage structuring was commenced linking and systematizing the home pages owned by governments, institutions, enterprises, etc., as the APEC Virtual Center (APEC-VC) project, with the fiscal 2000 results reported. In creating the homepage contents, in order to disseminate more useful information for the developing countries, 'Environmental Technology Cooperation for Developing Countries' as the original contents was prepared. In building a search engine, for the purpose of improving convenience for website users of the Virtual Center, APEC VC Japan created a retrieval system on the site. In overseas investigation, the researchers visited local plants to grasp problems and the needs by enterprises and organizations on water-pollution, waste treatment and the like, with the purpose of reflecting the investigation result in the website. In addition, the researchers visited APEC VC coordinators and/or contact points to exchange opinions with the view of expanding the network. (NEDO)

  15. FY 2000 report on the results of the research study of environmental information network; 2000 nendo kankyo joho network ni kansuru chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Described herein are the FY 2000 results of the research study on environmental information network formation. The Internet is experiencing an explosive increase in volume of information distributed therethrough. This is accompanied by increased problems related to information searches, information exchange security and information-reliability guarantees. First in demand are excellent portal sites, and second are sites that can be relied on to responsibly provide information. Cooperation with the real world off the Net is of particular importance, because the operating organizations, e.g., sites, will lose their raison deter, unless they clarify their unique abilities and characteristics under the tendencies towards broadened bands and ubiquity. The public sector, on the other hand, is highly reliable, accumulates a large volume of information, and has high network capacity. It has various functions, e.g., supporting the activities pertaining to ISO standards, and promoting the activities, e.g., those for educational programs, interdisciplinary exchanges by researchers, and matching of various organizations. The international cooperation for environmental information needs construction and operation of the networks, and construction of the infrastructures in the developing countries. If information becomes more ubiquitous, a chaotic sea of information will result. NEDO is strongly obliged to serve as the beacon, because it has established a huge volume of environment-related technologies, information, and networks. (NEDO)

  16. Achievement report for fiscal 1998. Development of Assessment Technology of Life Cycle Environment Impacts of Products; 1998 nendo seika hokokusho. Seihinnado lilfecycle kankyo eikyo hyoka gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    An inventory data collecting format is formulated, data collecting activities are launched through 23 industry associations and several investigatory agencies, and almost all the primary data are collected. All the inventory items are being rearranged into a convenient order, and efforts are under way to designate the association to be in charge and the method to be used for data collecting (the accumulation method, process model method). Problems about techniques in the veinous department are extracted. The flow of matters relating to various metals and glass after their use and the magnitude of their environmental impacts at the ultimate sites of treatment are understood though roughly. Investigations are conducted into typical formats overseas, a data arranging format is constructed, specifications are defined for a data inputting software program, and a request is placed with a dedicated dealer for the compilation of the said program. The architecture and specifications of an LCA (life cycle assessment) database system are determined, and its functions are undergoing an intermediate check by a research team for improvement. Endeavors are exerted at quantifying global warming, ozone layer depletion, biotoxicity, and photochemical oxidants for use as the basic data for damage evaluation. (NEDO)

  17. Research of environmental bioecosensing technology using ecological information. Part 2; Seitaikei joho ni yoru kankyo bio ecosencing gijutsu ni kansuru chosa. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Basic considerations of exploring and cultivating environmental reporter organisms are summarized. Mechanism of genetic engineering amplification and molecular biological amplification, and approach to combining them to a hardware as a bioindicator system are investigated. For the current status of molecular biological measurement technology for measuring ecological environment and its application, environmental diagnosis from a phyropathological viewpoint, environmental diagnosis using microorganisms, test fabrication of genetic sensor, and overseas examples of environmental monitoring network are described. For the application of ecological information and functions for developing innovative environmental remediation technology, issues and potential areas for research and development regarding the bioremediation technology in which the US has achieved a progress for the benefit of soil environment remediation are summarized. For the phytoremediation, an area of bioremediation, the metabolism of microorganisms which live in the rhizosphere, and the technology for controlling the microorganisms in the soil through plants are investigated. 66 refs., 50 figs., 17 tabs.

  18. Fiscal 2000 report on result of project for promoting exchange of international environmental technology information; 2000 nendo kankyo gijutsu kokusai joho koryu sokushin jigyo seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    With the purpose of sharing environmental technology information of the APEC countries, the homepage structuring was commenced linking and systematizing the home pages owned by governments, institutions, enterprises, etc., as the APEC Virtual Center (APEC-VC) project, with the fiscal 2000 results reported. In creating the homepage contents, in order to disseminate more useful information for the developing countries, 'Environmental Technology Cooperation for Developing Countries' as the original contents was prepared. In building a search engine, for the purpose of improving convenience for website users of the Virtual Center, APEC VC Japan created a retrieval system on the site. In overseas investigation, the researchers visited local plants to grasp problems and the needs by enterprises and organizations on water-pollution, waste treatment and the like, with the purpose of reflecting the investigation result in the website. In addition, the researchers visited APEC VC coordinators and/or contact points to exchange opinions with the view of expanding the network. (NEDO)

  19. Report on achievements in fiscal 1999. System technology to create human life compatible living environment; 1999 nendo ningen kodo tekigogata seikatsu kankyo soshutsu system gijutsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The present research and development is intended to develop the following technology: a system technology to measure, understand and accumulate human activities, analyze objectively the compatibility of human being with products and environments, and support to have the products and working environments comply with activity characteristics of individual persons (a system technology to create human life compatible living environment). Human activities are developed in various scenes, and it is not easy to structure technologies to measure, understand and support the activities common to all of the scenes. Therefore, development will be made on the technologies for measuring, understanding and supporting the activities in the human activity scenes. Development of the manipulative activity complying technology deals with human activities in the scenes to operate devices by which the activities are changed by situation identification and skills in addition to activity characteristics of individual persons. Furthermore, as a scene in which attention to the activity characteristics of individual persons, skills, and external situation is a problem, the automobile driving activities are taken up for discussion, as well as the object building work activities as a scene in which difference in skills of individuals is a problem. (NEDO)

  20. Development of the molecule imprint polymer recognized peculiarly the environment hormone; Kankyo horumon wo tokuiteki ni ninshiki kanona bunshi inpurinto porima no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Yoshida, M. [Kagoshima Univ., Kagoshima (Japan)

    2000-08-05

    The molecule imprint method (MI method) is the technique that makes the binding site which is complementary with the mold molecule in the polymer using a recognized object molecule as a mold, and gives the selectivity of the purpose in the polymer tailor-made like. The environment hormone is represented in the chemical substances (phthalic ester, bisphenol A, alkylphenol) which are produced from plastics or dioxins when refuse is burnt, and the organochlorine compounds (PCB, DDT, HCH) which are included in agricultural chemicals or chemicals besides. Whitcombe et al. report with respect to the MI polymer of which the recognition target is 2,3,7,8 tetrachlorodibenzodioxne (TCDD) which has the strongest toxicity in the dioxins. As an example of the MI method which targeted the other environment hormone, there is the research with respect to PCB by Hosoya et al. (NEDO)

  1. Report of 'Survey on Asian environmental information networks'; 'Asia kankyo joho network chosa' ni kansuru hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    Information systems, mainly aided by computers, are becoming increasingly important, contributing to development of wide areas of societies and economics, to begin with. However, few developing countries have established sufficient information systems, in spite of their strong desires to do so, which will further widen the gap between them and advanced countries, where these systems are acceleratedly advancing. Given these situations, Center of International Cooperation for Computerization (CICC) has been implementing various projects for providing assistance to and cooperation with oversea countries which are trying to develop information systems. This report summarizes the project, which CICC has been commissioned by Optoelectronic Industry and Technology Development Association as part of the cooperation programs, for establishing the Asian environmental information networks. It outlines the research cooperation project for the environmental networks, results of the 4 on-the-spot surveys, 2 occasions for inviting researchers to Japan, and construction of the internet and Asian environmental information network systems. (NEDO)

  2. Research on improvement of indoor air quality and prevention of fungi; Shitsunai kuki kankyo no kaizen to kabi boshi ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, Tatsuaki [Ochanomizu University, Tokyo (Japan). Faculty of Human Life and Environmental Sciences

    1998-12-16

    An epidemiological survey survey was performed to elucidate the fungal flora of a dwelling house. The measurements were carried out in an apartment in Yokohama from Jul. 1996 to Dec. 1997. Fungi were isolated from 106 sampling points (the surface of the walls, floors, etc.) with sterile stamps. It was proved that Cladsporium, Penicillium, Eurotium, and Yeasts showed characteristic distribution. Especially Cladsporium was not isolated from the spring to the summer, but increased in the autumn. In addition to the survey, experiments on fungal growth temperature (13, 20, 25, 30, 36, 42 degree C) and water activity (A w 0.75{approx}0.97) were carried out. Cladsporium grew well in 13, 20, 25 and 30 degree C, but didn't grow in 36 and 42 degree C. In addition, the growth activity of Cladsporium was down below Aw 0.91. Eurotium was isolated from under Tatami, where it has an unchanging temperature and relative humidity. Yeasts preferred very high humidity. It was concluded that environmental factors such as temperature and relative humidity related to the growth of fungi. (author)

  3. Environmentally friendly type coal utilization technology transfer project. Downstream field; Kankyo chowagata sekitan riyo gijutsu iten jigyo. Karyu bun`ya

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The paper arranged the result of the clean coal technology transfer project carried out during October to December, 1996. For the purpose of supporting introduction/spread of clean coal technology (CCT) in Asian and Pacific countries, the project invited engineers of the countries to Japan, aiming at fermentation of the understanding of CCT and improvement in ability. The project was held by NEDO and managed by Center for Coal Utilization, Japan. The manager course is for policy decision makers, management and senior management (plant manager class). By taking up CCT assessment and a menu of economical efficiency, prepared was the environment to which CCT is introduced in case of working out policy and planning plant/equipment investment. Moreover, the engineer course is for policy planners, medium-class management (section chief class), senior engineers (planners), and takes up materials for judgment in case of planning CCT facilities and proposing measures to reduce environmental loads by management and improvement of facilities at the same time. Fifteen engineers were invited: 6 from China, 3 from Indonesia, 3 from the Philippines, and 3 from Thailand

  4. Research report of fiscal 1997. Survey on information networks for environment technology transfer; 1997 nendo hokokusho. Kankyo gijutsu iten joho network chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    ICETT is one of the member organizations of APEC environment technology virtual center which established in Osaka in 1996 for active environment technology exchange between APEC countries based on a survey result obtained in fiscal 1995. ICETT began its information service in April, 1997, and completed useful prototype home pages which include the database composed of practical useful information on environment preservation technology of domestic factories and offices, and training information and local governments` approach cases to pollution control. In fiscal 1997, further survey was made, and the simulation software of a model process was also developed for training. Clean technology and energy saving technology strongly demanded by developing countries were surveyed to prepare a database including useful information for developing countries. A basic design software for bio-treatment of waste water was also prepared. The total number of home page accesses exceeded a predicted number for the first half year. 5 refs., 25 figs.

  5. FY1998 research report on the R and D on recycling technology. Part 1; 1998 nendo recycle nado kankyo gijutsu kekyu kaihatsu seika hokokusho. 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This project aims to develop recycling technology for reduction of environmental burden caused by waste, and promotion of recycling of wastes. As for advanced recycling technology for PET bottles, the facility was improved for improvement of a facility operability and product quality. Study was made on the effect of a raw bale quality and recycled flake colors on a product quality, the forming test with PS or PET labels, and the concentration and effect of washing liquid circulated in flake washing process. As for recycling technology of hard-to-dispose waste plastics, facility improvement and demonstration test were made for continuous operation of dry-distillation/gasification of shredder dusts and separation of nonferrous metals and glass. Study was also made on pulverizing and recycling technologies of FRP bath tubs, and such pulverization costs were estimated. As for production technology of chemical feed and fuel from wastes, study was made on removal technology of non-flammable substances, development of alkaline additives, reacting condition, development of reactors, and use technology as chemical feed. (NEDO)

  6. Fiscal 1998 R and D report on environment-friendly hydrogen production technology; Kankyo chowagata suiso seizo gijutsu kenkyu kaihatsu 1998 nendo seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For efficient oil-free environment-friendly production of hydrogen necessary for oil refining process and effective use of CO{sub 2}, this project develops the efficient hydrogen production techniques by using a capacity of microorganisms. On the R and D on improvement of screening and breeding for photosynthetic microorganisms, introduction of different hydrogenases, acquisition of hydrogen uptake negative strains, control of photosynthetic pigment expression, breeding of PHB synthesis negative strains were carried out continuously, and some problems were arranged confirming the contribution to increasing a hydrogen production capacity. On the R and D on large-scale cultivation techniques, engineering data were collected by using a module continuously. Based on the engineering data collected by the module test, the feasibility study was made on a possibility as industrial technology from the viewpoint of a profitability and environmental harmony. Screening of bacterial strains suitable for 4 kinds of wastewater and capable of producing hydrogen under extreme conditions, and basic studies on photoreactor and cultivation technique were conducted by outside research organizations. (NEDO)

  7. FY 1998 annual report on the fourth international forum on environmental catalysis (IFEC 99); Dai 4 kai kankyo shokubai kokusai forum (IFEC '99) 1998 nendo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The 4th international forum on environmental catalysis, held in January 1999 in Chemical Society of Japan's Hall, had a total attendees exceeding 170, including 10 foreign attendees invited. A total of 20 papers (including 10 by foreign attendees) were presented, discussing diversified problems; 3 keynote addresses regarding (to what extent environmental catalyst can contribute); and 5 for the session of catalysts for clean processes, 6 for the session of eco-friendly chemistry, and 8 for the session of environmental catalysts for air pollution. The lectures included (global environmental problems and environmental catalysts) by Prof. Segawa of Sophia University as the opening address; solid base catalysts by Prof. Ono of Tokyo Institute of Technology in the session of (catalysts for clean processes); activation of dioxygen by transition metal complexes-new approach to highly selective catalytic oxidation with molecular oxygen by Prof. Moro-oka of Tokyo Institute of Technology in the session of (Eco-friendly chemistry; and environmental catalysts-present and future as the comprehensive review by Prof. Misono of University of Tokyo in the session of (environmental catalysts for air pollution). (NEDO)

  8. Research report of fiscal 1997. Survey on strategies of export of environment technology in overseas countries; 1997 nendo chosa hokokusho. Shogaikoku no kankyo gijutsu yushutsu senryaku chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For active environment technology export to OECD countries, needs for environmental measures in developing countries were surveyed. Both collection of environment technology needs in developing countries and preparation of technology seeds information of Japanese enterprises, and promotion of environmental projects by adding an information dispatch function are important. Active preparation and exchange of experiences and know-how of concerned enterprises, local governments and national organizations are also necessary. For development and possible export of small- and medium-sized ventures with excellent technologies and know-how, a suitable consulting system is essential for risks. For smooth promotion of warming prevention by international cooperation, active development of monitoring technology is also important. To support developing countries, OJT of persons in charge in technology transfer sites, and preparation of information infrastructure are necessary. Japan with much know-how on environmental preservation should positively participate in international standardization activities such as ISO. 10 refs., 14 figs., 56 tabs.

  9. Fiscal 1998 survey report. Survey on method of environmental-impact assessment in wind power development; 1998 nendo furyoku kaihatsu ni okeru kankyo eikyo hyoka shuho chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    With the purpose of preparing the main points of 'environmental-impact assessment guidelines for wind power developments (draft)', examples of environmental-impact assessments, related laws and regulations in Japan and abroad were collected, and rearranged in respect to requirements in environmental-assessments, concrete procedures, survey/projection/assessment method, summarisation of results, etc. It was clarified, for example; in a large-scale wind power development, it can be dealt with by choosing items and contents on the assumption that a land area is developed; in a small-scale development, there is basically no need of considering the possible effect of the construction work; and, as far as noise, vibration and the ecosystem (plants/animals) are concerned, however, the characteristics of the site be taken into consideration. Objects for general assessment are noise, low-frequency air vibration, radio wave interference, the ecosystem (plants and animals) and the landscape. The guideline draft is constituted of (1) basic items, (2) overview of the area, (3) determination of items for environmental-impact assessment and (4) research, prediction, assessment, conservation measures and follow-up research; in the basic items, importance of preliminary consideration was emphasized, as were priority/simplification, implementation of environmental conservation measures, and implementation of follow-up research. (NEDO)

  10. Research and development cooperation project on environmental measurement using laser radar in fiscal 1995; Kankyo keisokuyo laser radar no kaihatsu ni kansuru kenkyu kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    For the purpose of contributing to the environmental management in Indonesia, Japan made R and D of a laser radar to measure the urban air pollution and an environmental network jointly with Indonesia in compliance with the actual situation of the country. At present, in developing countries, air pollution is becoming a big problem because of increases in population and in energy consumption in urban areas according to the industrial/economic growth. As for the laser radar, it is an active sensor with laser as light source and can observe in high resolution the three-dimensional space distribution such as density and composition of air pollutants. Japan is a leader in the development of laser technology which is a core technology for the laser radar and the preceding research. The equipment is installed at several points of urban areas in Indonesia, and at the same time, the observation network is constructed to collect, analyze and process data at the central processing center. This is a 4-year plan from fiscal 1993 to 1996. In fiscal 1995, negotiations with Indonesia and field surveys were conducted to determine sites for installation. A plan for system improvement was also decided on. 38 refs., 24 figs., 14 tabs.

  11. Research cooperation of the development of laser radar for environmental measurements; Kankyo keisokuyo laser radar no kaihatsu ni kansuru kenkyu kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Research and development of the laser radar for measuring the air pollution in urban areas and the environmental information network have been conducted through the cooperation with Indonesian researchers. A measurement system suitable to actual situation of Indonesia has been constructed. In FY 1996, some works have been conducted as in the final fiscal year. To set the laser radar for environmental measurements and to make a plan of measurement research, conditions of air pollution in Indonesia and setting places of systems have been investigated. Opinions for the cooperation research have been exchanged with Indonesian researchers. Actual trends of the environmental measurements technology using laser radar have been surveyed. Indonesian researchers have been invited to learn operation and data processing of the system. One unit of MIE diffusion laser radar system has been designed and fabricated, and an additional data processing program has been made. The system has been delivered to Jakarta and installed. After the adjustment, performance tests have been conducted to complete the construction of the system. 3 refs., 72 figs., 10 tabs.

  12. Chemistry for preserving the global environment. Part 5. Offensive odor; its present condition and control technique; Kankyo sozai no kagaku. 5. Akushu no genjo to taisaku gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Saiki, Y.

    1996-07-01

    Offensive odor substances belongs to a quite different field from the perfume inspire of the same sense of smell, and is a substance forming a lot of troubles which is formed in intimate resident environments such as manufacturing factories of the chemicals, incineration and decomposition treatment process of living body relating substances, stock raising facilities, restaurants and others. A material called the offensive odor substance is generally in very low concentration in the atmosphere, most of which is ppm order in its detection limit. And, the offensive odor intensity is proportional to logarithm of its concentration. For example, even removing 99.9% of the offensive odor substance from its forming source, there is remained its difficult countermeasuring problem of no removing as its offensive odor. At present, the offensive odor is severely regulated by means of laws and acts, research on its relating field is active, and its relating publications have become plenty. In this paper, outline on recent state of the offensive odor and its measuring technique was summarized. 14 refs., 6 figs., 8 tabs.

  13. Response to resolve environmental problems caused from power stations. Reuse engineering of waste water; Hatsudensho kankyo mondai kaiketsu e mukete no torikumi. Haisui no sairiyo gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Hayashida, T. [Hitachi Plant Engineering and Construction Co. Ltd., Tokyo (Japan); Hatta, T. [Kurita Water Industries Ltd., Tokyo (Japan)

    1997-10-15

    This paper introduces the electrodialysis method, the reverse osmosis method, and the evaporation system for reutilization of waste water in non-collection lines in power plants. In the electrodialysis method, waste water which has been divided and fed conventionally into a desalination chamber and a concentration chamber is supplied into the desalination chamber in the whole quantity to improve the recovery efficiency. A process of supplying sea water into the concentration chamber has made prevention of scaling possible. A small testing machine of high recovery electrodialysis system utilizing sea water was installed in an exclusively coal burning thermal power plant. A 3200-hour verification test has been performed, and its high treatment performance was verified. General waste water in thermal power plants is a waste water relatively less contaminated, which can be desalinated by using the reverse osmosis method to recover usable water at a low cost. However, the recovery rate decreases if salt concentration in the waste water is high. In contrast, the evaporation method can maintain the recovery rate at 90% or higher for salt concentration in the subject waste water of up to 20 g/l. Power plants in the United States built in inland areas use the evaporation method because of difficulty in obtaining sufficient amount of water. 6 refs., 22 figs., 7 tabs.

  14. Feasibility design of a floating airport and estimation of environmental forces on it; Futaishiki kuko no sekkei to kankyo gairyoku no suitei ni kansuru kento

    Energy Technology Data Exchange (ETDEWEB)

    Inoue, Y.; Tabeta, S.; Takei, Y. [Yokohama National University, Yokohama (Japan). Faculty of Engineering

    1996-12-31

    A rough design was performed on a floating airport. On this floating structure, environmental external force was estimated, mooring design was carried out, and discussions was given on the position retaining performance important for airport functions and behavior of the floating structure. The discussion was given on cases that the airport is surrounded and not surrounded by floating breakwaters. A floating structure which becomes super-large in size requires considerations on force due to sea level gradient as a result of a tide. Deriving flow condition changes and force acting on the floating structure simultaneously by using numerical calculations makes it possible to estimate current force given with considerations on influence of the flow conditions created by installing the floating airport. Estimation was carried out by using a zone dividing method on wave drifting force acting upon the floating airport. As a result, it was found that installing floating and permeating type breakwaters can reduce the wave drifting force acting on the floating airport. The wave drifting force working on the floating airport can be reduced by installing the floating and permeating type breakwaters to lower levels than when no such breakwaters are installed. The airport may be moored with less number of fenders when the fenders of the same type are used. 18 refs., 10 figs., 5 tabs.

  15. Development of an observation robot `Flying Fish` for comprehensive measurements of ocean environment; Kaiyo kankyo sogo kansoku robot `flying fish` no kaihatsu kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Koterayama, W.; Yamaguchi, S.; Nakamura, M. [Kyushu Univ., Fukuoka (Japan). Research Inst. for Applied Mechanics; Akamatsu, T. [Mitsubishi Heavy Industries, Ltd., Tokyo (Japan)

    1996-12-31

    With an objective for spatial continuous measurement of physical, chemical and biological amounts in ocean, development has been made on a wing controlled towed vehicle, `Flying Fish` which is capable of controlling depth, pitch and roll. Numerical simulations and two-year sea experiments have been carried out for the development. Flying Fish consists of a sub-system comprising a towing vehicle, towing cables, and on-board controllers. In a steady state, Flying Fish can be controlled at accuracy for depth of {plus_minus} 0.05m, pitch of {plus_minus} one degree, and roll of {plus_minus} 0.5 degree. This accuracy is sufficient for operating a chemical analyzer, the dissolved carbonic acid analyzer. Even in a non-steady state such as in changing the depth, the pitch can be controlled at {plus_minus} 3 degrees and the roll at {plus_minus} 0.5 degree. This extent of attitude change is within a range rendering no problems in maintaining accuracy of the measurement devices. The result of sea experiments for movements of Flying Fish agreed with that of the numerical simulation at practically usable accuracy. Flying Fish is verified as an effective system in investigating spatial variations in ocean data. 10 refs., 15 figs., 1 tab.

  16. Evaluation of building envelopes from the viewpoint of capability of controlling thermal environment; Onnetsu kankyo chosei noryoku ni yoru kenchiku gaihi no hyoka no kokoromi

    Energy Technology Data Exchange (ETDEWEB)

    Umeda, K; Ono, S [Taisei Corp., Tokyo (Japan); Shukuya, M [Musashi Institute of Technology, Tokyo (Japan)

    1996-10-27

    The ability that architectural space improves the thermal environment in comparison with outdoor environment is called the `capability of controlling thermal environment.` As the value becomes higher, the indoor thermal environment is more improved. In this paper, the controlling capability of six building envelopes with different window systems was compared. The heat transfer in the wall and window system is approximated using a lumped mass model of heat capacity to obtain a heat balance equation and combined with the heat balance equation in indoor air for backward difference. The wall surface temperature and indoor air temperature in a calculation model are then calculated. A radiation absorption coefficient is used for mutual radiation on each wall. In the model, the adjoining room or first- and second-floor rooms were made the same in conditions as the model on the assumption that the one-side lighted office in an RC reference floor is in the non-illumination and non-airconditioning state. In summer, the controlling capability remarkably varies depending on the window system. For the window facing the south, the annual capability is more advanced than in other directions and the indoor thermal environment is improved on the average. 7 refs., 12 figs., 1 tab.

  17. Realization of an accelerator for environmental refreshment in case of soil; Dojo no kankyo sosei no tame no kasoku no jitsugen

    Energy Technology Data Exchange (ETDEWEB)

    Isogai, H; Kawakami, T [Electrotechnical Laboratories, Tsukuba (Japan)

    1996-10-27

    Techniques have been studied to accelerate, on a commercial scale, the natural refreshment effects which synthesize useful materials, such as compost and grape and amino acids from carbon dioxide, oxidized wastes and excretions exhausted by man. The symbiotic relationship between primeval bacteria and useful bacteria for Japanese traditional foods was investigated in 3 different experimental sections which were commonly composted; the first one consisting of composted soil, the second one provided with a layer (EM layer), in which these bacteria were densely cultured, on composted soil, and the third one with a common accelerator driven only by solar energy. A total of 9 seed potatoes were planted, 3 for each section, to monitor their growth. It is quantitatively confirmed that, when cultured in the third section, they grow roughly 3 times faster than in the first one. Sweetness can be sufficiently secured by the EM effect, because of sufficiently high ground temperature in early summer and an anaerobic atmosphere kept in the system. 6 refs., 2 figs.

  18. Fiscal 1999 research report. Survey on geothermal development sites (Survey on natural environment); 1999 nendo chinetsu kaihatsu sokushin chosa. Shizen kankyo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This report summarizes the result on selecting sites for large-caliber production wells, and landscape characteristic evaluation for simulation, based on the landscape survey on C candidate site for geothermal development. Field survey was made on landscape, plants and animals in the Kirishima Eboshidake area. It was clarified that this area has diverse flora including some rare species such as rein orchid and monkshood which are listed as endangered species. In addition, not a few epiphytes were identified. The zoological survey result showed that planted forests of evergreen coniferous trees which cover a wide range of the surveyed area, and peripheral grassland, scrub and natural forests provide good habitats for mammals such as sika deer and wild boars. On the other hand, no animal species in need of special protection were found. Geologically some traces of landslide occurrence in the past were detected in the northern part of the surveyed area relatively. As the survey result, some promising sites suitable for geothermal development were selected, which are judged to have a relatively small impact on natural environment and landscape. (NEDO)

  19. Fiscal 1994 survey report. Survey of environmentally friendly chemical process (Ecochemistry); 1994 nendo kankyo ni yasashii kagaku hanno process (ecochemistry) ni kansuru chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    Processes that contain latent environmental problems are the massive generation of wastes (inorganic salt, acid catalyst, base catalyst, and huge quantities of wastewater), handling of dangerous substances (use of hydrogen fluoride, use of phosgene, and use of substances whose discharge is legally controlled), processes which consume much energy (circulation of quantities of raw materials, use of quantities of solvents, separation of products with difficulties, use of high pressure, and multiple stage reaction), and processes which are expected to use resources now remaining unexploited. As an element technology for the solution of problems, there is the development of a solid redox catalyst for liquid phase oxidation. As compared with a liquid phase homogeneous catalyst, it discharges less inorganic wastes, facilitates the separation, recovery, and treatment of inorganic salts, corrodes structural materials less, and is thermally stable. An alkane partial oxidation catalyst when developed will achieve more energy conservation than an alkene oxidation catalyst. In relation to acid/base reaction, the zeolite catalyst will be improved and ultrastrong acids and ultrastrong bases will be developed, and these will reduce wastes, mitigate corrosion, and facilitate product separation. The development of a process is also expected which will avoid the use of toxic phosgene. (NEDO)

  20. Current status and prospect on photo-catalyst application in environmental problems; Kankyo mondai ni okeru hikari shokubai oyo no ganjo to tenbo

    Energy Technology Data Exchange (ETDEWEB)

    Watanabe, T. [Toto Ltd., Kitakyushu (Japan)

    1995-09-30

    This paper summarizes application of photo-catalysts in environmental problems. The paper lists examples of the application in residential environments. Photo-catalytic decomposition is possible by using ultraviolet rays contained in room illumination if the bacterial presence is sparse. The examples thereof may be cited as follows: if colon bacilli are suspended on a tile with TiO2 photo-catalyst sintered in it and exposed to room illumination, the bacteria are disinfected; using photo-catalysts in a bathroom suppresses deposition of Pseudomonas aeruginosa; a photo-catalyst tile (TiO2 loaded with Cu) and light irradiation reduce intensity of tobacco smoke odor; and adsorbents may be used simultaneously if intermediate products are odor generating substances. The examples of applying photo-catalysts to regional environments may be quoted as follows: growth of algae in a Petri dish is suppressed by presence of Cu loaded TiO2 under room illumination; this leads to an expectation on its effect in a relatively clean water environment; glass beads loaded with a TiO2 photo-catalyst placed in a gold fish breeding tank reduces turbidity, the number of colon bacilluses, and COD value; and the mortality in gold fish shows no change. With an objective of application to exterior building materials, photo-catalyst applied tiles were left outdoors for 160 days. Nitric acid ions were detected that are thought to have been generated by decomposition of microorganisms that have deposited on the tiles. 6 refs., 5 figs., 3 tabs.

  1. Effect of Water Environment on Subcritical Crack Growth of Machinable Ceramics; Kaisakusei seramikkusu no kiretsu shinten tokusei ni oyobosu mizu kankyo no eikyo

    Energy Technology Data Exchange (ETDEWEB)

    Ikeda, K.; Kaizu, K.; Inotani, T. [Miyazaki Univ., Miyazaki (Japan); Yoshikawa, A.; Adachi, K.; Igaki, H. [Osaka Sangyo Univ., Osaka (Japan)

    1997-06-15

    The fatigue behavior of ceramics has been discussed on the basis of the relation between stress intensity facter (KI) and crack velocity (V). In this paper, the effect of environment on the relation between KI and V was studied on machinable ceramics (mica glass ceramics) and two kinds of glass ceramics with different grain sizes. The double torsion (DT) technique was used for the determination of the KI-V characteristics under different environments of air and ion-exchanged water. The characteristics of acoustic emission (AE) during stress corrosion cracking of mica glass ceramics was also examined. In water environment, the region II in the KI-V curve, in which crack velocity varies slowly with KI, disappeared. From this experimental fact, it was considered that at high KI, the crack velocity is encouraged by diffusion of the corrosive species to the crack and thus depended on the amount of water. SEM farc tography revealed that mica single crystals in the material caused crack arrest and deflection to occur. It is also found that AE event rate is quantitatively related to the crack velocity. AE measurement can be used in studying the crack propagation behavior of mica glass ceramics. 11 refs., 12 figs., 3 tabs.

  2. FY1995 study on three-dimensional integrated information environment toward human media; 1995 nendo human media e muketa sanjigen togo joho kankyo no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    In the next generation media environment, it is required to remove the boundary between virtual and real environment. The integration of these heterogeneous environments will enhance the applicability and availability of the human media. The aim of this work is to pioneer the new technology of 3-D integrated information environment in which both virtual and real environment are embedded, and to give a guide into the construction of human media. Our results consists of three parts as follows : (1) As a benchmark of the 3-D integrated information environment, the immersive television which has surrounding multi-projection displays was investigated. (2) A new method to synthesize arbitrary 3-D viewpoint images from 2-D real images was developed. On the other hand, a new concept of ray data description was introduced to represent whole visual data of 3-D real space. In the new concept, the whole visual data is treated as a set of ray data. New methods for superimposing and handling ray data were proposed. Potential applicability of the methods were clarified. (3) In order to enhance the reality of operations under the virtual environment, quantitative analysis was performed assuming that the HMD (Head Mounted Display) was used for displaying 3-D space information. (NEDO)

  3. Fire safety and environmental design of deep underground spaces used for human activities. Daishindo chika kukan no bosai/kankyo sekkei

    Energy Technology Data Exchange (ETDEWEB)

    Saeki, N.; Kadoya, M.; Tokuda, K.; Hisajima, T.; Okada, N. (Okumura Corp., Osaka (Japan))

    1992-11-10

    The disaster prevention and environment technology, which is the essential conditions for the living in the underground space, was developed to be applied to a simulated model space. The basic conditions including the location and utilization for the simulation model are as follows: (1) It locates at the city center of a big city, (2) A station for a high speed rail way (linear car) is located at the deep underground (50 m), (3) As there are still many physiological and psychological problems left unsolved for the living including dinning and sleeping in the underground, such facilities as private residential house, hotel, and hospital were excluded. Such facilities as shop, restaurant, theater, recreation facility, city hall, police station, and parking lot were considered. For the disaster prevention design, the design technique for emergency evacuation system within the building and for the smoke control system were taken up. For the air conditioning design, the large space air conditioning design, energy saving design system, and the deodorant air conditioning system were investigated. The energy program and the aqueduct program were also discussed. 24 figs., 6 tabs.

  4. Evaluation of indoor thermal environment with improved 65 nodes thermoreguration model; Kairyogata 65 bunkatsu taion chosetsu model wo mochiita shashitsunai onnetsu kankyo hyoka

    Energy Technology Data Exchange (ETDEWEB)

    Matsunaga, K; Sudo, F [Isuzu Motors Ltd., Tokyo (Japan); Tanabe, S [Ochanomizu Univ., Tokyo (Japan)

    1997-10-01

    Indoor thermal environment of a vehicle was evaluated by a numerical simulation. A numerical simulation using the equivalent temperature measured with the thermal manikin was conducted. Numerical manikin was improved and convective and radiative heat transfer at each body surface was described in detail. Comparative examination using the calculation results by the numerical simulation was also conducted. 3 refs., 8 figs., 2 tabs.

  5. Psychological influences for the driver by the changes of running circumstance; Jidosha no soko kankyo henka no driver eno shinriteki eikyo

    Energy Technology Data Exchange (ETDEWEB)

    Okura, S; Yokomori, M; Yamaguchi, S [Meijo University, Nagoya (Japan)

    1997-10-01

    A driver is influenced psychologically by the cars proceeding on the street and the cars parked on the shoulder which come into the front view. The traffic accidents are caused when these influences put a lot of stress on a driver. In this report, we study the relations between the road traffic condition on the streets and the highway and the driver`s psychological and psysiological responses by using the driver`s front view, sweating and pulse rate. 6 refs., 8 figs.

  6. Report on the survey in fiscal 1998. Survey on an environment technology transfer information network; 1998 nendo hokokusho. Kankyo gijutsu iten joho network chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This paper describes a survey on an environment technology transfer information network. Based on the achievements obtained by the surveys in fiscal 1995 and 1996, the ICETT has participated as one organization constituting the APEC environment technology exchange virtual center, and begun providing information since April 1997. As the environment technology information, those items actually employed by factories and operation sites in Japan are put into a data base, and into a home page including training information centering around those contained in the data base, and examples of works done by local governments for prevention of pollution. Furthermore in fiscal 1997, a simulation software for a model process has been developed. Fiscal 1998 strengthened the data base for environment preservation technology information, investigated environment preserving model companies and summarized them including even their management aspect. Investigations were carried out in developing countries on application of cleaner technologies. Gaps far exceeding anticipation exist in every field between these developing countries and Japan. Environment protection measures applied and succeeded in the developing countries as the means to narrow the gaps were collected, and compiled as the specific examples. (NEDO)

  7. FY 1998 annual report on the geothermal development promotion survey. Report on landscape survey; 1998 nendo chinetsu kaihatsu sokushin chosa hokokusho. Shizen kankyo chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Described herein are results of the natural environment surveys, carried out in the Shitanotai Region in Yuzawa City, Akita Pref., where Geothermal Development Promotion Survey C is scheduled. On-the-spot surveys, conducted from June to November, covered 3 items of landscape, vegetation and animals. The Shimonotai Region has a number of ponds and swamps, some of which are used as fields for Brasenia shreberi, and wet shield plant communities in places reflecting these environments. The zoological survey results show that moderate to dry deciduous forests of Japanese beeches (Fagus crenata) and Mongolian oaks (Quercus mongolica var. grossesserrata) in this region provide sound habitats for large mammalian wild animals, e.g., moon bears (Selenarctos thibetanus). For birds, there are some areas extracted indicating high possibility of being inhabited by honey buzzards (Pernis ptilorhyncus), which are listed as a near threatened species by the Environment Agency. Geologically, traces of landslide occurrence in the past have been detected widely, indicating need for more detailed investigation for land stability. These surveys have extracted several areas whose natural environments and landscapes are damaged relatively little by geothermal development. (NEDO)

  8. FY 1998 annual report on the environmental technology working group. 19th R and D activity report; 1998 nendo kankyo gijutsu bunkakai. Dai 19 kai jigyo hokokukai

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-09-01

    Summarized herein are the FY 1998 activities by the environmental technology working group, extracted from the 19th R and D activity report by NEDO. Mr. Mitsukawa, a NEDO's director, outlines the measures for diversifying environmental problems, prevention of global warming, waste disposal/recycling, and toxic chemical substances in the report entitled (Outlines of environmental technology development projects). The report entitled (Eco-cement production techniques for comprehensive utilization of urban type wastes (For efforts for construction of Ichihara eco-cement production facilities)) outlines characteristics of eco-cement production techniques, recyclability of eco-cement, and the facilities. The report entitled (Techniques for reutilization of plastics present in wastes as the blast furnace stocks) outlines the system, R and D project and commercialization, and vinyl chloride recycling system, to be developed by the financial support by NEDO. The other reports include (Development of universal controllers for coping with environmental problems) and (R and D of techniques of simplified dioxine analysis). (NEDO)

  9. Assistance to countries which are on their way to energy conservation and preservation of the environment. Sho ene tojokoku enjo to kankyo hozen

    Energy Technology Data Exchange (ETDEWEB)

    Osaka, Kunikazu [The Energy Conservation Center, Tokyo, (Japan)

    1990-02-20

    Energy conservation is considered the most realistic measure against the problem of the global warming for the time being. Developing countries consume about 30% of the energy consumed in the world. Although their absolute consumption amount is little at the moment, their energy consumption is increasing year after year. Efficiency of their energy utilization is low because compared with advanced countries their equipments are of old type and their technologies are behind the times. It is, therefore, estimated possible to conserve energy by 30% with e improvements and plant and equipment investments. It is very effective to introduce Japanese advanced energy conservation technologies to these countries through international cooperation. In fact investigation commissions composed of experts have been dispatched to Thailand, China and Argentine, experts have been dispatched to foreign countries to stay there for several years and give assistance, trainees have been received, and study and training meetings have been held already. Seminars with Japanese lecturers have been also held in many foreign countries since 1983. As for the future prospect, establishment of core organizations as the base of technologies and human resources in foreign countries for the further promotion of assistance is expected. 7 figs.

  10. Report on a survey in fiscal 1999. Survey on possibilities of environmental cooperation in relation with proliferation of environment preservation technologies and institutions in developing countries; 1999 nendo kankyo taisaku gijutsu seido nado no tojokoku fukyu ni kakawaru kankyo kyoryoku kanoseichosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Cooperation in energy and environment aspects with developing countries is considered very important in view of the following points: (1) the cooperation will help developing countries to grow economically while minimizing the damages from industrial pollution and environmental problems; (2) conservation of energies and promotion of use of new energies will contribute to solving pollution problems associated with energy production, and will result in assurance of stability of primary energy availability for Japan; (3) preservation of environments in countries exporting foods to Japan will link to maintaining health of Japanese people and increasing their welfare; and (4) Japanese industrial pollution preventing technologies and knowledge whose levels are high worldwide may be utilized to create new business chances for Japanese business entities. The present survey has discussed the importance by territories, the importance by cooperation modes, and sharing of roles by governmental and private organizations, and performed case studies. Considerations were given from the discussion results on how the environmental projects should be planned in the environment cooperation, the contents to be of win/win from the viewpoint of motivation, the project image for subjected territories being composite and comprehensive, and the cases from the viewpoint of mutual coexistence referred to as prevention of global warming and assurance of food and energy resources. (NEDO)

  11. Fiscal 1997 survey report. Feasibility study of the environmentally friendly type coal utilization system (feasibility study of the environmentally friendly type coal utilization system in India); 1997 nendo chosa hokokusho. Kankyo chowagata sekitan riyo system kanosei chosa (Indo ni okeru kankyo chowagata sekitan riyo system kanosei chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The survey was conducted of the present situation of coal utilization and the present coal situation such as the environmental state of India which is a coal producing/consuming country next to China in Asia. The paper studied a feasibility of the introduction of the environmental friendly type coal utilization system` to be planned in India. The items for survey are the present situation of economy and energy and the future trend, environmental problems on coal utilization, the present status of the coal distribution system and study subjects, the present status of coal utilization by field and study subjects, a possibility of briquette use, a possibility of coal fluidization, electric power development plans and coal combustion technology in each industry, etc. The subjects are the obligation of coal preparation to coal thermal power plants 1000 km away from coal mines starting 2001, measures taken for effective ash use, measures taken for superannuated gas furnaces, etc. Based on the results of these site surveys and reports of the investigation under consignment from CMPDI, the paper studied/analyzed possibilities of introducing the coal utilization system having actual introduction results in Japan to India, and made an investigational report. 39 refs., 12 figs., 56 tabs.

  12. Achievement report (2/2) on R and D in fiscal 1999 on environment adaptive next-generation supersonic propulsion system. R and D of environment adaptive next-generation supersonic propulsion engine; 1999 nendo seika hokokusho. Kankyo tekigo gata jisedai choonsoku suishin system no kenkyu kaihatsu - Kankyo tekigo gata jisedai choonsokuki you enjin kaihatsu (2/2)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-12-01

    With an objective to develop an environment adaptive next-generation supersonic propulsion system, research and development have been performed on noise reducing technologies, NOx exhaust reducing technologies, CO2 exhaust reducing technologies, and environment adaptive engine system technologies. This paper summarizes the achievements in fiscal 1999. In developing the CO2 exhaust reducing technologies, discussions were given on the following items as the researches on a technology to apply three-dimensional fiber-reinforced materials to large structures: application of metal-based composite materials (MMC) to the fan rotor; application of CMC, TiAl materials to turbine structural materials; TiAl shroud support, CMC shroud, high load turbine cascades supported by the composite materials, and application of the CMC, TiAl materials to the gas exhaust nozzle. In developing the environment adaptive engine system technologies, flows were established to judge the achievement of the project target of noise reduction, NOx exhaust reduction and CO2 exhaust suppression. Furthermore, in the demonstration and research of the engine integration, the setting was conducted on the engine test schedule, and so was the primary setting for criteria on parts to be assembled into the engine. (NEDO)

  13. Fiscal 2000 survey report on Asia/Pacific Regional Environment Problems Researcher Exchange Promotion Projects. Construction of Environmental Technology Research Network in the Asia/Pacific Region; 2000 nendo Asia Taiheiyo chiiki kankyo mondai kenkyusha koryu sokushin jigyo hokokusho. Asia/Taiheiyo chiiki kankyo gijutsu kenkyu kaihatsu network kochiku chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of developing and popularizing environment conservation technologies in the Asia/Pacific region, activities were conducted for Environmental Technology Research Network in the Asia/Pacific Area (ETERNET-APR). In this fiscal year, under the motto of Expansion of International Collaborative Researches on Environmental Technology, a 7th international workshop was held in Yokkaichi City, Mie Prefecture, with the attendance of approximately 60 people in Japan and from abroad. Researchers from overseas, in addition, attended a 10-day training program at the National Institute for Resources and Development and others in preparation for the embodiment of international collaborative research. A survey was conducted overseas for the promotion of database utilization and registration and for grasping the problems intrinsic to the respective research institutes and problems to occur at every stage of development. People's Republic of China was visited, where a miniscale workshop was held, study tours were made, and opinions were exchanged. It was actually felt, at the places that were visited, that ETERNET-APR was certainly in function in various fields. (NEDO)

  14. Fiscal 1996 survey report on the environmentally friendly type coal utilization system feasibility study. Feasibility study of the environmentally friendly type coal utilization system in Malaysia and Vietnam; Kankyo chowagata sekitan riyo system kanosei chosa. Malaysia Vietnam ni okeru kankyo chowagata sekitan riyo system kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This survey arranged the status of coal utilization technology and the status of coal production, supply, etc. in Malaysia and Vietnam, examined/studied coal utilization systems in both countries, and finally assessed feasibility of introducing the environmentally friendly type coal utilization system. As a country of primary energy source which is abundant in crude oil, natural gas, hydroelectric power, coal, etc., Malaysia now depends on crude oil and natural gas for 80% of its energy, and places emphasis on exploration of natural gas and oil refining. In electric power and cement industries where coal is consumed, effectiveness and environmental issues in association with coal utilization are future subjects. In Vietnam, the north is abundant in hydroelectric power and anthracite, and the south in oil and gas resource, but the north and central districts are in a state of undevelopment. Coal is used for coal thermal power generation, cement industry, and residential/commercial fuel. In the future, effective coal utilization and environmental issues will be subjects. 16 refs., 38 figs., 75 tabs.

  15. Change of environmental factors in different site which effect the conversion efficiency of photovoltaic module. Comparison of the environmental factors in Shinjuku Tokyo with the one in Chino Nagano; Kotonaru chiten ni okeru taiyo denchi no henkan koritsu ni eikyo wo ataeru kankyo inshi no henka. Tokyoto Shinjukuku to Naganoken Chinoshi no kankyo inshi no hikaku

    Energy Technology Data Exchange (ETDEWEB)

    Higuchi, T.; Tani, T.; Hirata, Y.; Inasaka, T. [Science University of Tokyo, Tokyo (Japan)

    1997-11-25

    Environmental factors affecting conversion efficiency of solar cells were measured in Tokyo and Nagano to comparatively study the difference. In the study, measurement was made of intensity of global solar radiation on an inclined surface (insolation intensity), ambient air temperature, and distribution of spectral solar radiation at the two points. Also measured were output characteristics of polycrystal silicon solar cell modules and amorphous silicon solar cell modules. The result of the comparative analysis was as follows: The annual inclined global solar radiation amount integrated in 1996 is 27% more in Nagano than in Tokyo. The weighted average insolation intensity in Nagano is 0.09 kW/m{sup 2} higher in Tokyo. The weighted average cell temperature in Nagano is 4degC lower than in Tokyo. The effective spectral ratio in Nagano is 1-2% lower both in polycrystal Si and amorphous Si than in Tokyo. Thus, it was inferred from that environmental factors are different that conversion efficiencies of photovoltaic modules were different. 6 refs., 5 figs., 5 tabs.

  16. Achievement report for fiscal 2000 on research and development of environment compatible next generation supersonic propulsion system. 2/2. Development of environment compatible next generation supersonic aircraft engine; 2000 nendo kankyo tekigogata jisedai choonsoku suishin system no kenkyu kaihatsu seika hokokusho. 2/2. Kankyo tekigogata jisedai choonsokukiyo engine kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    This paper describes the achievements in fiscal 2000 in development of an environment compatible next generation supersonic aircraft engine. Development is performed, as part of CO2 emission suppressing technology development, on technologies for application to fan and compressor of metal matrix composites (MMC) having high specific strength useful to reduce engine weight, and brisk structures. Discussions were given on the spraying method for ring manufacturing, mono-tape method, and preliminary test method for fan aerodynamic performance verification. In order to reduce engine weight and fuel consumption, enhancement is required on the turbine inlet temperature and engine efficiency, whereas studies were made on mono-crystalline heat resistant alloy TMS-75 developed in Japan for application to the turbine structure. Studies were continued on castability, heat-treated structure control, mechanical properties, heat resistance and heat oxidation resistance. For the purpose of contributing to reduction of cooling air, improvement of fuel consumption, and CO2 reduction by providing turbine blades with high cooling performance structure, studies were given on the transpiration cooling structure to multiply the layers of mono-crystalline materials having high mechanical strength and durability to realize a structure artificially close to porous materials. The discrete control system was also discussed to improve the fuel consumption. (NEDO)

  17. Report on a fiscal 1995 basic survey of the environmental engineering. Investigational study on the systematization of the environmental business related information; 1995 nendo kankyo business no engineering ka kiso chosa hokokusho. Kankyo business kanren joho no system ka ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-05-01

    An investigational study was conducted on directionality of arranging the environmental business related information, based on the analysis of the status of arrangement of the environmental business related information and the examination of the needs for the environmental business related information. As the directionality of arranging the environmental business related information which is most suitable for enterprises and research institutes to use, the following were considered: (1) arrangement of a system for effective use of the information owned by environmental related organs; (2) arrangement of a system for supply of the environmental business related information mainly to medium and small companies; (3) arrangement of the environmental business related information forum. In (1), it is necessary to arrange the system for the joint use of information owned by each institute. In (2), the tackling with the environmental business should be supported by arranging the system for information supply from big companies to medium and small companies. In (3), it is necessary to arrange the information forum, and it is necessary to control information thoroughly for the management for prevention of bad deeds of brokers. 7 refs., 19 figs., 21 tabs.

  18. Research report of FY 1997 on the clean coal technology promotion project and region model survey. Measures for environmental load reduction: feasibility survey on the environmental load reduction-type utilization Energy Center (interim report); 1997 nendo chosa hokokusho. Clean coal technology suishin jigyo chiiki model chosa `kankyo fuka teigen taisaku: kankyo fuka teigengata sekitan riyo energy center feasibility chosa` chosa hokokusho (chukan hokoku)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The survey has given an eye to the coal that it can be easily burnt together with combustible waste and supplements unstable generation of waste. Thus, the establishment of the Energy Center at the place where infrastructure of coal will be arranged, a lot of combustible waste will be expected to generate and a considerable aniybt if energy will be used, has been planned, and this survey is intended to study the scale of Energy Center, its economy and the problems to be solved. In power plant project using RDF for above-mentioned local governments, the construction of power plant and the renewal time of the existing incinerator to RDF facility can be planned separately in this system. The power plant will be economically constructed and the amount of coal can be decreased in accordance with increased RDF to meet wide range of refuse treatment. In FY 1997, the actual situation of the waste treatment and the infrastructure of coal supply was surveyed, and selection of the place suitable for the Energy Center and its scale was studied. 69 figs., 50 tabs.

  19. FY 2000 report on the survey project on the environmentally friendly energy community, excluding mostly projects on electric power generation. Survey project on the environmentally friendly energy community in the Nagoya area; 2000 nendo kankyo chowagata energy community chosa jigyo 'shutoshite hatsuden jigyo ni kakawaru mono wo nozoku' chosa hokokusho. Nagoya chiiki ni okeru kankyo chowagata energy community chosa jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The paper studied the working-out of the basic plan on the RPF (refuse paper and plastic fuel) production business in the area mainly including Nagoya city and of the business profitability. RPF is a solid fuel made by grinding, mixing and pressurizing paper and plastics in appropriate sizes. Its shape and calorific value can be adjusted according to the needs. In the Nagoya area, the demand for RPF is more than the supply, and therefore a much larger amount of RPF is in need. In Phase 1, business was studied for paper and plastics in the container packing paper waste and business-derived general waste. As a result, the RPF production amount was 21,000 t/y, which is equivalent to the effect of reduction of the same amount of coal. As to the profitability, it was made clear that the business can be profitable if collecting 41,400 yen/ton as the re-commercialization cost. In Phase 2, the design of the facilities was made for the larger-sized commercialization by adding industrial waste plastics to the waste in Phase 1. (NEDO)

  20. Achievement report for fiscal 2000 on research and development of environment compatible next generation supersonic propulsion system. 1/2. Research and development of environment compatible next generation supersonic aircraft engine; 2000 nendo kankyo tekigogata jisedai choonsoku suishin system no kenkyu kaihatsu seika hokokusho. 1/2. Kankyo tekigogata jisedai choonsokukiyo engine kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    This paper describes the achievements in fiscal 2000 in development of an environment compatible next generation supersonic aircraft engine. In reducing noise, discussions were given on noise absorbing materials, jet mixer ejector nozzles, and fans. In order to reduce NOx emission, studies were performed mainly on stable combustion of an HTCE combustor. Reasonability of the AI control was verified by using simulations of a combustor model. Design was made on a fuel AI control system required to avoid such unstable combustion as backfire and spontaneous ignition. A CMC liner for an innovative heat resistant combustor was discussed. In the CO2 emission suppressing technologies, studies were performed on technologies to apply to large structures such three-dimensional fiber reinforced materials as MMC, CMC and TiAl. In developing damage tolerating design technologies for the advanced heat resistant material structures, studies were made on application to turbine structures of micro-structural stabilization for an extended period of time, heat insulation/oxidation resistant coating, micro and macro organization control and crack propagation analysis. The paper also describes an overall demonstration studies on technologies for very fine cooling of pseudo microporous structure, discrete control for CO2 reduction, an environment compatible engine systems and engines. (NEDO)

  1. Feasibility study of environmentally friendly type coal utilization systems. Feasibility study of environmentally friendly type coal utilization systems in sectors except the coal industry in China; Kankyo chowagata sekitan riyo system kanosei chosa. Chugoku no sekitan kogyo igai no bumon ni okeru kankyo chowagata sekitan riyo system kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    For the purpose of working out a comprehensive master plan for application of the coal utilization system, the paper surveyed and studied the coal utilization system in terms of environmental measures and efficiency improvement in the utilization of coal. As a result of the discussion with NEDO and the National Planning Committee of China, Liaoning Province (the whole China) and Shenyang City were selected as a model area and a model city for the survey and study. As energy conservation measures taken in the former, desirable are intensifying/capacity-increase of boilers, kilns, etc. and adoption of new-type/high-efficient equipment. Also expected are reinforcement of combustion control and improvement of efficiency by using coal preparation, industrial use coal briquette, etc. Measures taken in the latter are the same as those taken in the whole China. As SOx reduction measures for Liaoning Province, desirable is installation of dry-type desulfurization equipment and simple desulfurization equipment. As dust prevention measures for it, desirable is installation of electrostatic precipitators or high-functional bag filters. SOx reduction measures for Shenyang City are the same as those taken in the whole China. SOx can be reduced by using coal-prepared low-sulfur coal and industrial use coal briquette added with desulfurizing agent. 88 figs., 163 tabs.

  2. Fiscal 1995 survey report on the feasibility study of the environmentally friendly type coal utilization system. Feasibility study of the environmentally friendly type coal utilization system in Thailand; Kankyo chowagata sekitan riyo system kanosei chosa. Tai ni okeru kankyo chowagata sekitan riyo system kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-06-01

    The paper surveyed the present situation and future trend of economy, energy supply/demand, coal production/distribution/utilization and the environmental effects in Thailand. The survey on the coal utilization and its environmental effects was partially requested of the environmental research institute in Thailand. The amount of coal utilization in Thailand rapidly increased to nearly four times as large as that ten years ago mainly in terms of domestic lignite under the government`s policy on expansion of the domestic energy use. However, most of this domestic lignite is low-grade coal with low calories and high sulfur content, and the use of it was rapidly increased mostly in power generation sector without no adequate environmental measures taken. This caused an environmental problem on air pollution due to sulfur oxides at Mae Moh power plant in the north several years ago, and the damages to the regional residents, etc. were given much publicity by journalism and developed the social problem. Accordingly, Thai people are now critical of the coal resource exploration and the coal use expansion. Under the circumstances, the Ministry of Industry and the energy related ministries/offices are obliged to review their development/promotion plans. 84 figs., 99 tabs.

  3. Fiscal 1997 feasibility survey of an environment friendly type coal utilization system. Feasibility survey of the environment friendly type coal utilization system in Malaysia and Vietnam (case of Vietnam); 1997 nendo chosa hokokusho. Kankyo chowagata sekitan riyo system kanosei chosa (Malaysia oyobi Vietnam ni okeru kankyo chowagata sekitan riyo system kanosei chosa (Vietnam ban))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper grasped the state of coal utilization by coal consumption field, the state of coal physical flow in Vietnam, etc., surveyed/studied a possibility of introducing the environment friendly type coal utilization system, and assessed the possibility. As to energy resources, the north is abundant in hydroelectric and coal (mainly anthracite) resources, and the south in oil and natural gas resources. Coal production in fiscal 1997 is planned to be 10 million tons. Coal preparation technique presently available is only grain size sieving. Accordingly, it is necessary to study for heightening efficiency of facilities and modernizing facilities in accordance with the introduction of the environment friendly type coal utilization technology. During the study, it is possible to propose improvement on coal processing technology (coal preparation technology). Assessment and study are made especially of the coal selection system, fine coal recovery system and waste water treatment system. For the plan on new coal-fired power plants (300MWtimes4), there is left much necessity of proposing studying models considered of the anthracite combustion technology and environmental improvement and of assessing/studying them. 60 figs., 117 tabs.

  4. FY 1999 report on the potential survey of the environmentally friendly type coal utilization system. Potential survey of the environmentally friendly type coal utilization system in the Philippines; 1999 nendo chosa hokokusho. Kankyo chowa gata sekitan riyo system kanosei chosa (Firipin ni okeru kankyo chowa gata system kanosei chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the purpose of contributing to working out a master plan for the introduction of the environmentally friendly type coal utilization system in the Philippines, analysis was made of the state of coal use/the state of spread by industry mostly including the electric power industry, cement industry and residential/commercial use fuel sector. In the Philippines, the amount of coal use has rapidly been increasing since coal-fired power plants started operation. For the promotion of the use of domestic coals, it is important to reform low grade coal. Moreover, the technology is required which copes with the reinforced regulation against SOx emissions. In the cement industry, coal and coal ash have not yet been effectively used. Therefore, the following measures should be taken to increase the competitive force: energy conservation measures, reinforcement of environmental measures such as dust prevention, and effective use of the fly ash emitted from power plants. In general households and small-/medium-sized industries such as tobacco drying, they still use a large amount of charcoals and firewood, which is approximately 86% of the residential/commercial use energy. There is a growing tendency for the development/spread of coal briquette as substituting energy. (NEDO)

  5. Report on the fiscal 1993 investigational study of the environmental technology development trend in Japan. Trend survey of the introduction policy of environmentally friendly products; 1993 nendo Nippon ni okeru kankyo gijutsu kaihatsu doko nado ni kansuru chosa kenkyu hokokusho. Kankyo chowagata seihin no donyu hosaku nado doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-05-01

    An investigation was conducted into the systematical scheme for the introduction and promotion of environmentally friendly products mostly to the U.S., Europe and China. In the U.S., the introduction policy is given to one and all fields of the industry. The introduction policy of the U.S. has a characteristic that the introduction is left to the market principle by DSM or permit dealing, etc. except the preferential tax system and systematical finance in which the government is concerned. The policy of European countries is characterized by the idea preceding, standards or rules are first given, and the whole is pushed on to them. Accordingly, it seems that there is few atmosphere of expecting to receive the government side economic incentives from the corporate side. Legal regulations on the environment in China were prepared in a comparatively early time (1979), but the supervision of obeying the regulations and the appearance/spread of environmentally friendly product menus have just started. Accordingly, as the introduction policy on environmentally friendly products, there was found nothing valuable but the regulations. 12 refs., 3 figs., 15 tabs.

  6. Report on a project to support promotion of forming an environmentally friendly energy community. Survey on an environmentally friendly community business by means of high-efficiency wastes power generation system in the Toyota-Kamo wide area; Kankyo chowagata energy community keisei sokushin hojo jigyo chosa hokokusho. Toyota Kamo koikiken kokoritsu haikibutsu hatsuden kankyo chowagata energy community jigyo chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Taking the Toyota-Kamo wide area as the object, wastes power generation is positioned over the society system as worked on by administrations and operators integrally to incinerate mixedly those incineratable materials such as plastics among general and industrial combustible wastes for high-efficiency generation of power, which is supplied to electric utility operators as surplus power. Discussions were given on the business feasibility and the effectiveness as a society system. In this area, the mixed model B plan (dealing with general wastes plus industrial wastes) was evaluated as an effective plan as the society system. This is because the plan has effect to incinerate, melt and generate power from industrial wastes which have been used for land-fill, effect of improving the power generation efficiency, and effectiveness of mixed treatment with general wastes. The plan A in which general wastes are made into RDF, then incinerated mixedly with industrial wastes for power generation was evaluated to have high reliability potential of power supply and to be an effective plan as a society system, if effect can be expected to reduce transportation energy as a result of making the system large enough and turning wastes into RDF. (NEDO)

  7. Investigations in fiscal 2000 on feasibility of environment friendly coal utilization system. Feasibility survey on environment friendly coal utilization system in India; 2000 nendo kankyo chowagata sekitan riyo system kanosei chosa hokokusho. Indo ni okeru kankyo chowagata sekitan riyo system kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Taking the area of the clean coal technology (CCT) effective for energy conservation and environment preservation as the object, a feasibility survey has been performed on executing a model project in India. About 70% of the total power generation capacity in India depends upon coals existing in abundance inside the country. Since the local coals are high in ash, low in sulfur, and low in calorie, the environmental problem related to thermal power plants is the disposition of fly ash. The Central Electricity Authority of India expects solving this problem by CCT introduction. It also expects increase in combustion efficiency by using ultra-critical boilers. The Indian cement industry often uses in-house electric power generation facilities because of high electric power cost, wherein the produced coal ash is used as a cement raw material. The matter of the strongest interest is the introduction of a high-efficiency combustion system that depends on low-grade coals. Among the CCTs, strong interest was shown in the fluidized bed cement kiln and the circulating fluidized bed boiler. The iron and steel industry has expectations toward effective coal washing technologies and coke manufacturing technologies. (NEDO)

  8. Fiscal 1996 survey report on the environmentally friendly type coal utilization system feasibility study. Feasibility study of the environmentally friendly type coal utilization system in the Philippines; Kankyo chowagata sekitan riyo system kanosei chosa. Philippines ni okeru kankyo chowagata sekitan riyo system kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Grasping the present situation of coal utilization technology in the Philippines, the paper proposed a feasibility study of introduction of the environmentally friendly type coal utilization system which seems to be needed in the future. (1) Introduction of the environmentally friendly type coal utilization system in the electric power generation sector: there are only four full-scale running coal thermal power plants in the Philippines. In the future, several coal thermal plants are planned to be constructed by 2005, but for the new installation, it is desirable to adopt fluidized bed boilers with wide application to coal kinds. In case of 0.3-1.0 million MW class plants, it is planned to adopt high grade import coals, and it will be natural to fire pulverized coal. For the processing of flue gas, it is a must to install desulfurization facilities and smoke/soot removal devices. (2) Utilization/development of domestic low grade coals: at the mine-mouth generating plant, it is necessary to investigate the economically minable amount of coal, confirm productivity, survey coal quality, etc., and select boiler. As to coal briquetting technology, it is necessary to examine coal quality for tests and make a thorough study of what technology is most suitable. 50 figs., 78 tabs.

  9. Fiscal 1996 survey report on the environmentally friendly type coal utilization system feasibility study. Feasibility study of the environmentally friendly type coal utilization system in Thailand; Kankyo chowagata sekitan riyo system kanosei chosa. Tai ni okeru kankyo chowagata sekitan riyo system kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The paper investigated and studied the present situation and future trend of coal utilization and distribution in Thailand, and the present situation of environmental effects and the measures taken for environmental protection. Around 2010, coal will probably be produced only at EGAT`s Mae Moh (MM) coal mine. Demand for overseas coal is expected to be 40-50 million tons in 2011, and preparation of the coal center becomes a subject. For general industry use coal, pretreatment such as coal preparation, coal blending and briquetting is needed, considering coal quality, usage, transport distance and environmental effects. Brown coal of MM coal mine is a lignite with high sulfur, high ash content and low heating value. Wide spread of its use can be expected if upgrading is possible such as desulfurization, deashing, increasing heating value. In the electric power generation field, the absorber was installed at the existing boiler of the mine-mouth generating plant to conduct a verification test on high grade desulfurization of ultra-high sulfur lignite. In the industry field, the circulating fluidized bed boiler was adopted. In the residential/commercial field, introduction of briquette was proposed. 80 refs., 84 tabs.

  10. FY 1999 Project of information exchange by researchers on environmental problems in the Asia-Pacific region. Report on investigations for establishing Environmental Technology Research Network in the Asia-Pacific Region; 1999 nendo Asia/Taiheiyo chiiki kankyo mondai kenkyusha koryu sokushin jigyo hokokusho. Asia/Taiheiyo chiiki kankyo gijutsu kenkyu kaihtsu network kochiku chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Described herein are the results of the FY 1999 activities for the project of information exchange by researchers on environmental problems in the Asia-Pacific region. In 1999, the 6th International Workshop was held in City of Yokkaichi, Mie Pref., with the theme (Implementation of international collaborative researches on environmental technology) at International Center for Environmental Technology Transfer, with a total of more than 50 domestic and foreign attendees actively participating in the discussion. The keynote addresses were (Use of coal and environmental improvements) presented by Mr. Yoshisada Nitta, Director at Central Research Institute of Electric Power Industry, and (Potential of clean fuel from biomass) presented by Dr. Kyu-Wan Lee of Korea Research Institute of Chemical Technology. The overseas surveys were conducted to promote the use and registration of the databases, and to identify problems by the on-the-spot investigations in Vietnam, the Philippines and Republic of Korea. At the same time, the mini-workshops were held for information exchange with the research institutes. It is keenly felt that Environmental Technology Research Network in the Asia-Pacific Region (ENTERNET-APR) works certainly in various areas, with the attendees in the last workshops serving as the key persons. (NEDO)

  11. Research report of FY 1997 on the environmentally acceptable coal utilization system feasibility survey. Environmentally acceptable coal utilization system feasibility survey in Malaysia and Vietnam (Malaysia); 1997 nendo chosa hokokusho. Kankyo chowagata sekitan riyo system kanosei chosa (Malaysia oyobi Vietnam ni okeru kankyo chowagata sekitan riyo system kanosei chosa (Malaysia ban))

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In this survey, the coal utilization status in individual consumption sectors and coal distribution status in Malaysia are summarized as basic data for the introduction of environmentally acceptable coal utilization systems. In this fiscal year, the status of existing coal utilization technology and environmental issues in Malaysia are summarized as basic data for the introduction of above-mentioned systems on the basis of data and information collected by basic research and site survey in FY 1996. Malaysia is one of the rich countries producing the primary resources with crude petroleum, natural gas, hydro-power, and coal. The coal demand will be realized after saturating LNG development since 2000. The major coal consumption industries are power generation sector and cement industry sector. As expected increase in the future coal consumption, efficiency of coal utilization and environmental issues are problems in the future. Based on the FS results of this survey, the survey will be continued for planning and conducting the model project required from Malaysia. 8 figs., 34 tabs.

  12. FY 1998 survey report. Survey on reduction in environmental effect of greenhouse effect gas by the transfer of environmental technology in the Asian region; 1998 nendo chosa hokokusho. Asia chiiki ni okeru kankyo gijutsu iten ni yoru onshitsu koka gas no kankyo eikyo keigen ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Effects of the transfer of environmental technology were studied as an important policy for control of greenhouse effect gas in the Asian region. As schemes, those that were drew up by NEDO, JICA, etc. now exist and are used also in Japan. However, for the control of greenhouse effect gas emission which is expected to rapidly increase in future, it is indispensable to construct a new powerful and effective scheme in which technology transfer and fund to be given are organically connected. Especially, in the U.S., etc., the assistance of developing countries of a huge amount of money such as Japan's ODA is not extended. However, they position the environmental technology as an important strategy and is developing the assistance of developing countries by technology transfer and eco-business of private companies. Also in the eco-business field, the environment-related technology of Japanese companies is used in Asian developing countries, with expectations of its being a new business with international competitive strength. This is the subject for the whole global environment, and an important subject also for Japan which requires the creation of a new business field with international competitive strength. (NEDO)

  13. Report on the results of the fiscal 1997 R and D under consignment from NEDO of photon measuring/processing technology (development of high-efficiency production process technology); 1997 nendo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku photon keisoku kako gijutsu (kokoritsu seisan process gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Development is made of high energy-efficiency laser processing technology and high efficiency/high grade photon generation/control technology as laser light source, for the purpose of energy conservation/efficiency heightening of production processes which require a large amount of energy such as welding, joining, surface treatment, and particle fabrication. As to keyhole dynamics of the molten metal generated on the laser weld, construction of simulational mathematical models was started. Equipment to fabricate semiconductor ultrafine particles which become the core of quantum dot functional structures was designed to fabricate particles. In-situ optical measuring technology was studied of element/size of particles of below 30 nm in size by emission spectroscopy associated with the plasma irradiation. As tightly focusing all-solid-state laser technology, studied was the wavelength conversion method in which harmonics are generated four times as much as the fundamental wave due to high efficient generation of high power UV laser. Also studied were high laser strength, low optical losses, conditions for fostering high homogenity crystals. Technology for high accuracy processing of element surface was established. High efficiency photon generation technology was comprehensively investigated. 140 refs., 276 figs., 46 tabs.

  14. FY 2000 report on the results of the research and development project for the photon-aided instrumentation and processing technologies. Development of high-efficiency production process technologies; 2000 nendo photon keisoku kako gijutsu seika hokokusho. Kokoritsu seisan process gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Described herein are the FY 2000 results of development of the photon-aided instrumentation and processing technologies, aimed at improving efficiency of the production processes which have been massively consuming energy, e.g., those for welding, joining, surface treatment and granulation for producing fine particles. The program for production of the functional composite compounds by the microscopic processing technologies prepares the electrically resistant films and dielectric films by in-situ mixing two types of the ultrafine particles. The program for the in-situ measuring technology is aimed at measuring contents of the constituent components of fine particles, 30nm or less in size, to an accuracy of 10% by the emission spectroscopy, after making them plasmatic. The program for the high-power, all-solid-state laser technology is developing the excited chamber for the high-power, all-solid-state slab type laser, in order to realize the energy-efficient laser-aided processing. The program for the tightly-focusing, all-solid-state laser technology develops the highly uniform crystals by growing the GLBO crystals for producing the high-power ultraviolet laser beams, is developing the techniques for production of the wavelength converting elements, including the GLBO crystal package, and develops the wavelength conversion method by the fourth-harmonic generation with the all-solid-state laser beams as the fundamental wave, realizing the high harmonic power of 23W, for generating the high-power ultraviolet laser beams at a high efficiency. (NEDO)

  15. FY 2000 report on the results of the regional consortium R and D project - Regional consortium energy. First year report. Development of a next generation biopolymer information measuring system based on the nano channel electrophoresis; 2000 nendo chiiki consortium kenkyu kaihatsu jigyo - chiiki consortium energy. Nano channel denki eido ni motozuku jisedai seitai kobunshi joho keisoku system no kaihatsu (dai 1 nendo) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    On the basis of the nano channel electrophoresis technology, the construction was proceeded with of a system which integrates the basic process such as reaction, separation and detection needed for measuring biopolymer information and analyzes a number of samples simultaneously and with high accuracy/high sensitivity. Studies were made in the following three fields: 1) development of the basement technology on extraction/amplification/separation/detection of biopolymer; 2) development of micro-processing technology and system design and study on the development of device; 3) comprehensive investigational study. In 1), developmental technology is divided into the following: technology to effectively fraction/refine biopolymer from biological samples, technology for recognition control and manipulation of biopolymer, technology of amplification use micro-reaction of biopolymer, multiple selection technology of biopolymer using the specific molecular recognition, and technology for ultra-high speed separation of biopolymer. As to the multiple selection technology, DNA terminal recognizing hemin is altered by thiol group and connected to the surface of electrode to make an electrode type hemin recognition device. (NEDO)

  16. Project in fiscal 2000 of developing international standards for supporting new industries. Standardization of method for evaluating characteristics measurement for micromachine materials; 2000 nendo shinki sangyo shiengata kokusai hyojun kaihatsu jigyo seika hokokusho. Micro machine yo zairyo no tokusei keisoku hyoka hoho no hyojunka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Targeting the international standardization of the method for evaluating properties measurement for micro-machine materials, R and D has been performed on measurement and evaluation of mechanical properties of different thin film materials with a thickness of about 10 {mu}m or less and a width of 100 {mu}m or less. This paper summarizes the achievements in fiscal 2000. The current fiscal year has executed tensile tests of thin film materials for micro-machines, and surveys on technological trends related to the standardization thereof inside and outside the country. A working process was developed to manufacture test pieces of the thin film materials including mono-crystalline silicon for the purpose of executing the round robin test. Prototype test pieces were fabricated. The round robin test was performed by using these test pieces, wherein improvements were given on the test pieces, structure of the testing machine, the distortion measuring method, and the test piece mounting method. Furthermore, discussions were given on the film forming conditions and the heat treatment conditions with regard to mainly the thin titanium film made by using the sputtering process and thin nickel film made by using the plating process. The IEC/TC47/WG4 committee has announced to propose this evaluation technology as the future international standard. (NEDO)

  17. In-situ testing of the liquefaction potential of soft ground using an s-wave vibrator and seismic cones. Part 1. System, concept and preliminary test result; S ha vibrator oyobi seismic cone wo mochiita gen`ichi jiban ekijoka potential no hyoka. 1. System kosei oyobi genchi yosatsu keisoku kekka

    Energy Technology Data Exchange (ETDEWEB)

    Inazaki, T [Public Works Research Institute, Tsukuba (Japan)

    1996-05-01

    For the purpose of evaluating liquefaction in situ, it was proposed that an S-wave vibrator designed to serve as a source in a reflection exploration method be utilized as a strong vibration generating source, and measurement was conducted in this connection. Equipment used in this test included an S-wave vibrator, static cone penetration machine, and various measuring cones. A multiplicity of measuring cones had been inserted beforehand into the target layers and comparison layers, and changes upon vibrator activation were measured. On a dry bed of the Tonegawa river, a 40m{sup 2} field was set up, and 41 cone penetration tests were conducted, with the cones positioned zigzag at 5m intervals. In this way, the ground structure was disclosed from the surface to the 10m-deep level. For the measurement, 3-component cones and seismic cones were placed at prescribed depths, and fluctuations and waveforms presented by pore water pressure at each level were determined with the vibration source changing its place. It was found that the changes in the pore water pressure exposed to vibration assume characteristic patterns corresponding to the conditions of vibration application. 5 figs., 1 tab.

  18. Research on PV system application on residences. Part 1. Report on the systems and PV measurement results of an experimental passive solar house; Taiyoko hatsuden system no jutaku eno oyo ni kansuru kenkyu. 1. Taisho tatemono taiyo to taiyoko hatsuden system keisoku kekka

    Energy Technology Data Exchange (ETDEWEB)

    Ishihara, O.; Sakai, K.; Hirakawa, M. [Kumamoto University, Kumamoto (Japan). Faculty of Engineering

    1997-11-25

    System of the house is outlined, and warming performance and photovoltaic power generation system energy performance are taken up. It is a one-storied meeting hall situated in an apartment area, whose heat loss factor is 2.59kcal/m2hdegC. Ninety hybrid solar cells provided with circulating air heat collectors are installed on the east-side of the roof, interconnected to the commercial power system. In the daytime in summer, the house is fully insulated from solar radiation, with the room temperature kept a little lower than the open air temperature. The range of daily change in the room temperature is narrow, providing a comfortable residential space. When the windows are opened in the evening, cool air comes into the room to replace the warm air inside, reducing the difference in temperature between the inside and outside of the room. In winter, insolation time is short on the east side of the roof which finds itself out of the sun. Under the circumstances, the system outputs but a little and the quantity sold is quite small in winter. But, in summer, sale of power can be practicable, thanks to exposure to sufficient sunshine. The inverter rated at 3.5kW attains a 90% or higher operating rate in the presence of an input of power of 0.5kW or more. 4 refs., 10 figs.

  19. Fiscal 1998 intellectual infrastructure project utilizing civil sector functions. Research and development project on prompt-effect type intellectual infrastructure creation (Basic study of measurement of human characteristics); 1998 nendo minkan no kino wo katsuyoshita chiteki kiban jigyo seika hokokusho. Sokkogata chiteki kiban sosei kenkyu kaihatsu jigyo (Ningen tokusei keisoku ni kansuru kiban kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the development of working conditions fit for aged people and devices for them to operate, their visual function and behavioral characteristics are measured and analyzed. In the study of visual functions, 50 people from local cities and regions and another 50 from Osaka and its neighboring cities are subjected to measurement regarding visual acuity required in daily life, color discrimination, dark adaptation, glare, and the like. In the study of performing characteristics, 500 people are subjected to measurement regarding the scope of movement of upper limbs, their reach, and skillfulness with which the people can move fingers. When brightness, luminance, and contrast are caused to change relative to letters and background, aging is found to exert a great influence on the ease of reading, dark adaptation, and glare. As for the upper limb work range and reachability and the skillfulness in finger movement, it is found that aging narrows down the tolerant work area, lowers the working pace, and greatly affects skillfulness depending on the device operating method, all these disclosing actualities of difference attributable to age and sex. Concerning the device operating position and the ease of device operating force application, new measuring and evaluating methods are worked out, and correlations between the contents of operation and the operating position are seized. (NEDO)

  20. Report on achievements of research and development of a technology to apply human senses to measurements in fiscal 1995. 2. Main issue (Research and development of a human sense index applying technology); 1995 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu seika hokokusho. 2. Honronhen (ningen kankaku shihyo oyo bijutsu no kenkyu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This paper describes the achievements in fiscal 1995 on research and development of a human sense index applying technology. Total system design and fabrication were launched on a human comfort meter. A resin-made human shaped body attached with warm heat sensing elements and a software logic for a control system for whole body movements were devised. Fabrication was carried out on a driver's seat, a simulated visual field generating device and a system to calculate the machine's movements on a real time basis to perform experiments to evaluate operation reliability by using a 25-ton lifting crane. A system was created that can measure in situ the physiology, psychology and activity reactions. An experimental environment was set that can be operation reliability evaluation indexes by measuring physiological and psychological reactions during crane works, and selection was launched on physiological index candidates. Elucidation was made on characteristics of parallax of both eyes being the main visual function to structure the VR space. At the same time, sensual and physiological verification was given on how important the conditions presented by merged images created by the parallax of both eyes can be in raising the reality of the VR space. The paper also describes the relationship between muscle fatigue and physiological indexes. (NEDO)

  1. Report on achievements of commissioned studies on research and development of a technology to apply human senses to measurements in fiscal 1994. 2. Main issue (Part 5 for research and development of a correlation and evaluation technology); 1994 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu. 2. Honronhen (Sokan hyoka gijutsu no kenkyu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    This paper describes the research and development of (1) working environment having human senses and affinity at nuclear electric power plants, (2) a correlation technology for comfort in composite environments composed mainly of warm heat environment, (3) space-type human interface adapted to human senses, and (4) a human comfort meter. With regard to the subject (1), improvements were made on the experimental facilities, data processing systems, and environment improving devices, and data were collected and evaluated from subject experiments. With regard to the subject (2), 'development of a system to investigate correlation among externally stimulating environment, physiological effects, and sense volume based on a physiological reaction model', and 'research and development of a quantitative evaluation technology for comfort in composite environments composed mainly of warm heat environment' were executed. With respect to the subject (3), 'measurement of factors in visual sense operating environment affecting mental burden feeling', 'development of space-type human interface', and 'research on a method to utilize the eyeball movement information' were carried out. With regard to the subject (4), a warm heat sensing element structure was developed. In addition, a comfort determining software was completed that calculates hot-cold heat sense of a human body from different conditions of the warm heat sensing elements. (NEDO)

  2. Report on achievements of commissioned studies on research and development of a technology to apply human senses to measurements in fiscal 1994. 2. Main issue (Part 4 for research and development of a correlation and evaluation technology); 1994 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu. 2. Honronhen. Sokan hyoka gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    This paper describes the research and development of (1) a method to evaluate warm heat comfort by living scenes of workers by using a human body heat model, (2) a sense volume estimation method using skin temperatures, and (3) a stress measuring technology and a stress relaxing technology by using scent. With regard to the subject (1), the studies having been performed for the past three years incorporated into the human body heat model development such new elements as artery-vein shunted blood vessel and two-system circulation net, and an attempt was made to introduce a conception called AVA activity in the hot-cold heat sensing estimation model. The current fiscal year has carried out collecting basic data for two-model development, and structuring the human body heat model and the hot-cold heat sensing estimation model, and the warm heat environment presenting and measuring system. With regard to the subject (2), such researches were carried out as the 'research on elucidating the correlation between sensing volume and skin temperatures', 'research on the skin temperature changing mechanism', and 'development of a face heat model'. With respect to the subject (3), the hormones noted as the adrenal gland hormone are epinephrine, nor-epinephrine, and dopamine belonging to catecol amine (CA) known as the adrenal gland medulla hormone, and cortisol (CS) being the adrenal gland cortex hormone. The researches in the first term elucidated the interesting relationship between these hormones and negative emotion. (NEDO)

  3. Combustion characteristics of stratified mixture. 1st Report. Measurement of mixture distribution in a constant-volume combustion chamber using laser-induced NO2 fluorescence; Sojo kongoki no nensho tokusei ni kansuru kenkyu. 1. Laser reiki NO2 keikoho ni yoru teiyo nenshokinai kongoki bunpu no keisoku

    Energy Technology Data Exchange (ETDEWEB)

    Fujimoto, M.; Nishida, K.; Hiroyasu, H. [Hiroshima University, Hiroshima (Japan). Faculty of Engineering; Tabata, M. [Mazda Motor Corp., Hiroshima (Japan)

    1996-06-25

    Laser-induced fluorescence from nitrogen dioxide (NO2) as gas fuel tracer was applied to determine mixture stratification in a pancake-type constant-volume combustion chamber using propane and hydrogen fuels. The second-harmonic output of a pulsed Nd: YAG laser was used as a light source for fluorescence excitation. The fluorescence images were corrected by a gated image-intensified CCD camera. The quantitative analysis of fuel concentration was made possible by the application of linearity between fluorescence intensity and NO2 concentration at a low trace level. The stratified mixture (center-rich or center-lean) was concentrically formed in the central region of the chamber by a jet flow from a tangentially oriented port. The concentration difference in the radial direction of the chamber decreased with time from the start of injection. The rate of decrease was faster for hydrogen than for propane. After 300 ms from start of injection, however, the time histories of the concentration difference were nearly constant for both fuels regardless of overall concentration. 10 refs., 16 figs., 1 tab.

  4. Report on achievements of commissioned studies on research and development of a technology to apply human senses to measurements in fiscal 1994. 2. Main issue (Part 4 for research and development of a correlation and evaluation technology); 1994 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu. 2. Honronhen. Sokan hyoka gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    This paper describes the research and development of (1) a method to evaluate warm heat comfort by living scenes of workers by using a human body heat model, (2) a sense volume estimation method using skin temperatures, and (3) a stress measuring technology and a stress relaxing technology by using scent. With regard to the subject (1), the studies having been performed for the past three years incorporated into the human body heat model development such new elements as artery-vein shunted blood vessel and two-system circulation net, and an attempt was made to introduce a conception called AVA activity in the hot-cold heat sensing estimation model. The current fiscal year has carried out collecting basic data for two-model development, and structuring the human body heat model and the hot-cold heat sensing estimation model, and the warm heat environment presenting and measuring system. With regard to the subject (2), such researches were carried out as the 'research on elucidating the correlation between sensing volume and skin temperatures', 'research on the skin temperature changing mechanism', and 'development of a face heat model'. With respect to the subject (3), the hormones noted as the adrenal gland hormone are epinephrine, nor-epinephrine, and dopamine belonging to catecol amine (CA) known as the adrenal gland medulla hormone, and cortisol (CS) being the adrenal gland cortex hormone. The researches in the first term elucidated the interesting relationship between these hormones and negative emotion. (NEDO)

  5. Fiscal 2000 research report on the study on new device material, measurement, and analysis technologies for data communication base improvement program; 2000 nendo joho tsushin kiban kodoka program ni kakawaru shin device zairyo keisoku kaiseki gijutsu ni kansuru chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-02-01

    Concerning the 'new device material, measurement, and analysis technologies' which is one of the important technological constituent of the data communication base improvement program, investigations were conducted as to the future direction of middle-term technology development efforts and the important tasks to discharge. Workshops were organized to deal with the subjects named below, and the results of discussion were made into a report. It is proposed in the report that common recognition be fomented about future feasibility of the development of the new device material, measurement, and analysis technologies; that presentations be made as to how the development of the new device material, measurement, and analysis technologies should be carried out in what direction; that the tasks to discharge for the new device material, measurement, and analysis technologies be clearly defined; and the like. It is also decided that findings offered by experienced people of the industrial, academic, and government circles be fully utilized at deliberation conferences and that studies be conducted for the implementation in the future of the data communication base improvement program. Materials on the 1st-4th semiconductor program study meetings and EIAJ (Electronic Industries Association of Japan)/NEDO (New Energy and Industrial Technology Development Organization) workshops are collected in the report. (NEDO)

  6. Achievement report for fiscal 1999 on research and development of technologies for medical welfare equipment. Ultra high-speed/high-precision MRI system for brain function measurement; 1999 nendo iryo fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho. Chokosoku/koseido nokino keisoku MRI system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-05-01

    A generator of various stimuli is completed, capable of generating light, acoustics, odor, taste, temperature, and vibration, and the harmful effect of its stimulus providing unit on the uniformity of MRI (magnetic resonance imaging) magnetic field is kept at 0.2ppm or less. A single or multiple stimuli are simultaneously generated according to the control program, and they may be set to synchronize with heartbeat or breathing. A light stimulus providing unit is also built, equipped with a line-of-sight detector for the observation of eye movement to occur in response to the light stimulus. Using this unit, the line of sight and the pupil diameter are determined at 60Hz. An experimental MRI unit (maximum spatial resolution: 0.5mm times 0.5mm; activated region positioning error: {+-}2mm or less) is built, and improved. The input/output terminals are modified of an experimental QD4Ch coil for clinical evaluation, and this results in a 1.5 times increase in sensitivity. A brain function image data processing program is applied to the measurement of brain functions, which enables the isolating of the region of activated brain functions. Various stimuli are applied to the subjects in compliance with a planned stimulation paradigm, and a success is attained in the measurement of brain functions by measuring changes in magnetism in blood hemoglobin due to local activation in the brain. (NEDO)

  7. FY 1999 report on the results of the intellectual basement creation/utilization technology R and D project. R and D of standard data on thermophysical property of fluids and high-temperature melts and measuring technology; 1999 nendo ryutai oyobi koon yutai no netsu bussei hyojun data to keisoku gijutsu no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the purpose of realizing database of thermophysical value information, studies were made on the following and the FY 1999 results were summed up: preparation of the research environment and information environment for experiment and analysis, and acquisition/collection of standard data with high-reliability. As to thermophysical properties of natural environmental substances and the aqueous mixtures, the thermophysical data on the mixed fluid of ammonia and water were collected by experiment and from literature. About the polymer system, measurement was made of solubility/diffusion coefficients of CO2 in polymer. Concerning refrigerants, PVT quality measurement of CO2 was conducted. In relation to the vapor-liquid equilibrium of fluid, preparation by literature survey was made of standard data on vapor-liquid equilibrium relations of multi-component system composing of alcohol and glycols. As to the transportation quality of fluids, conducted were the measurement of viscosity of substituting freons and fabrication of a measuring device for thermoconductivity. Further, the following were carried out: development of optical measuring technology of thermophysical values of high-temperature melts, measurement of thermoconductivity of high-temperature melts by the short-hot-wire method, development of measuring technology of surface tension/density of molten semiconductor, and study on determination of standard values. (NEDO)

  8. Report on achievements of research and development of a technology to apply human senses to measurements in fiscal 1995. 2. Main subject (Part 3. Research and development of a product compatibility indexing technology); 1995 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu. 2. Honronhen (Seihin tekigosei shihyoka gijutsu no kenkyu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This paper describes the product compatibility indexing technology, extracted from the achievements in the development of a technology to apply human senses to measurements in fiscal 1995. In the environmental compatibility of operating works, development was made on a surveillance operating screen which is said to have high compatibility with human senses and recognition characteristics, and a prospect was obtained on superiority in performance. Improvement was given to the facilities to experiment and measure the mental work load indexes (brain wave and pulse variation and the like). Device and operation compatibility technology requires functional design that can handle how to identify different works and the work features considering changes in experiences and skills of the workers. A computer system was structured for stimulation and task execution as the system to support the environment for indexing experiments. The product compatibility study is in the stage of having structured its framework, rather than performing specific researches. However, when the framework is completed, it will be possible to implement basic guidance presentation for spatial design, and product evaluation for individual persons with arbitrary body forms. In addition, the framework could be utilized as a manual for individual product indexing and design evaluation. (NEDO)

  9. Measurement of turbulent flow fields in a agitated vessel with four baffles by laser-doppler velocimetry. Analysis with periodic averaged velocity profiles; Baffle tsuki heiento kakuhan sonai nagare no LDV ni yoru keisoku. Shuki heikin sokudo bunpu ni yoru kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    Suzukawa, K [Ube Industries, Ltd., Tokyo (Japan); Hashimoto, T; Osaka, H [Yamaguchi University, Yamaguchi (Japan). Faculty of Engineering

    1997-11-25

    The 3-D flow field relative to a rotating paddle blade is acquired by synchronizing LDV measurements with the output of a shaft-mounted encoder. This makes it possible to capture the impeller stream velocity field, including the details of the discharge flow region behind the blades. Mean velocities ensemble-averaged between a specific impeller blade pair (over 90deg) show the extent of periodicity and the passage and structure of the discharge flow region. Pumping capacities are determined at both sides of impeller and tip of impeller, and it is shown that the radial jet is a consequence of fluid entrainment into the discharge flow region. Mean velocities taken in a rotating frame of reference reveal a significant periodic variation near the impeller than those taken in a fixed frame. 13 refs., 12 figs., 1 tab.

  10. Correlation between interstitial flow and pore structure in packed bed. 1st Report. Axial velocity measurement using MRI and visualization of axial channel flow; Juten sonai ryudo to kugeki kozo no sokan. 1. MRI ni yoru jikuhoko ryusoku bunpu no keisoku to jikiuhoko channel ryu no kashika

    Energy Technology Data Exchange (ETDEWEB)

    Ogawa, K; Yokouchi, Y; Hirai, S [Tokyo Institute of Technology, Tokyo (Japan)

    2000-02-25

    Structure and velocity measurements using magnetic resonance imaging (MRI) have been performed experimentally to obtain a correlation between pore structure and interstitial flow through the packed bed of 5 mm diameter in the tube of 36 mm ID. To measure axial velocity maps of water flow through the packed bed, the phase method of using the phase difference of water spin magnetization between flowing and stagnant fluids by applying magnetic fields with bipolar gradients was employed. The spatial resolution of the obtained map in 0.2 mm x 0.2 mm x 0.5 mm. It was made clear from the obtained axial velocity maps that channel flows with higher axial velocity were induced not only near the wall but also in the internal region of the packed bed. Furthermore, pore structure of the packed bed was characterized from multi-slice images by partitioning of void space and combining of each pore section along the axial direction to analyze the structure-flow correlation. It was found from image analysis that axial channels with long and straight void space existed in the pore structure, and that most of the channel flows with higher axial velocity were induced in the axial channels. The flow rate through an axial channel depends on the square of the averaged cross section of the axial channel. (author)

  11. Development of velocity interferometer and its application to piston motion measurement in a compression tube of freepiston shock tube; Sokudo kanshokei no kaihatsu to sono jiyu piston shogekihakan no asshuku kannai no piston undo no keisoku eno oyo ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Koremoto, K.; Hashimoto, T. [Tohoku University, Sendai (Japan); Takayama, K. [Tohoku University, Sendai (Japan). Inst. of Fluid Science; Ito, K [National Aerospace Laboratory, Tokyo (Japan)

    1999-10-25

    A free piston shock tunnel has been intensively used as a hypersonic flow ground test facility and its characteristics depend sensitively upon the piston motion in its compression tube. The continuous measurement of the piston motion in its compression tube was studied in an analogue facility in which a piston motion in a 50mm dia. and 2000mm long compression tube was measured continuously and accurately from its start to the collision with bumper section. To achieve it a velocity interferometer was developed particularly to measure the piston speed in it. Then piston motions were successfully measured and result agreed very well with numerical result. (author)

  12. FY 1992 Report on the results of the research and development of manganese nodule collection system. Instrumentation/control systems; 1992 nendo mangan dankai saiko system no kenkyu kaihatsu (mangan dankai saiko system) seika hokokusho. 5/5. Keisoku seigyo system hen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-03-01

    This project is aimed at development and fabrication of the test system for collecting manganese nodules on deep seabeds, and demonstration of its functions by the comprehensive marine tests, to collect the design data necessary for a commercial mineral-collecting system. The efforts are directed to development of the control system which coordinates and integrates the instrumentation, control and display functions of the total system and individual subsystems. Two areas are investigated; (1) test schedules; preparation of the draft manuals for implementation of the tests of the instrumentation/control systems, and (2) design and fabrication of the test devices. The item (1) prepares the draft manuals for implementation of the tests of those sections related to the instrumentation/control systems. The item (2) includes the detailed designs of the instrumentation/control systems, and constituent systems, such as control, data processing, data transmission, underwater cable and underwater position finding systems, conducted in coordination with the related subsystem development sections. The other devices fabricated include the underwater cable systems and terminals for the instrumentation system dedicated for the mineral-lifting system. (NEDO)

  13. FY 2000 report on the results of the regional consortium R and D project - Regional consortium R and D field. First year report. Development of an on-line/real-time dioxin measuring system; 2000 nendo chiiki consortium kenkyu kaihatsu jigyo - chiiki consortium kenkyu kaihatsu bun'ya. Dioxin no on line real time keisoku sochi no kaihatsu (dai 1 nendo) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    With the supersonic molecular jet resonance multiple photon ionization mass analysis method (SSJ method) as basement technology, the development was proceeded with of a portable dioxin spectrometer to measure dioxins emitted from incinerator on line and at real time and to control/improve the state of combustion. Studies were made in the following three fields: 1) development of pico second wavelength variable color laser; 2) development of a flight hour type mass spectrometer; 3) development of the pretreatment technology suitable for analysis of dioxins, precursors, etc. by supersonic molecular jet spectroscopy. In 1), the prototype was fabricated to assess the performance, and it was confirmed that the prototype has the targeted characteristics. In 2), as to the coaxial ionization and ring double skimmer electrode system, the convergence and mass resolution of ion were measured, and a possibility of the commercialization was obtained. In 3), it was confirmed that there is a possibility in rapid pretreatment by alumina fiber filter. (NEDO)

  14. FY 1991 report on the results of the contract R and D of the human sense measuring application technology. 4. R and D of correlation/evaluation technology (2); 1991 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu seika hokokusho. 4. Sokan hyoka gijutsu no kekyu kaihatsu (2)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1982-03-01

    As a part of the correlation/evaluation technology, the following were conducted in this R and D. (1) R and D of space-type human interface adaptable to human sense; (2) R and D of human comfortmeter; (3) research on non-contact skin temperature measuring technology; (4) research on measuring technology of stress indicator material, and technology to relax stress using fragrance. In (1), conducted were the development of space-type human interface, study on the correlation between the visual operating environment and the mental work load/working efficiency, and development of acceleration heartbeat meter. In (2), the basic element experiment was conducted to clarify the basic concept of human comfortmeter, and the basic specifications were made clear. In (3), the experiment using person to be tested was studied to know face skin surface temperature distribution patterns, and correlations between quantity of senses such as thermal/cold senses, concentration, strain and relaxation and mental quantity. In (4), the most important subject is preparation of the environment suitable for the development of new experimental process and device/software. Therefore, the preparation was made considering listing-up of the expected experimental items, selection of common elements, systematization of hardware, establishment of rules of the experimental process, etc. (NEDO)

  15. FY 2000 report on the results of the research and development project for the photon-aided instrumentation and processing technologies. R and D of the high-performance maintenance technologies for power generation plants; 2000 nendo photon keisoku kako gijutsu seika hokokusho. Hatsuden shisetsuyo kokino maintenance gijutsu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Described herein are the FY 2000 results of development of the photon-aided instrumentation and processing technologies, as part of the R and D of the high-performance maintenance technologies for power generation plants. Production of the fine, functional circuits is studied for microscopic processing technology. The light source with variable wavelength-in a range of 2 to 5{mu}m for the solid-state laser, to measure concentration and composition of gases by the infrared absorption laser. The photon wave front compensator is being developed, to prevent disturbance-induced sensitivity deterioration for measurement of high temperature by the laser-aided ultrasonic instrumentation. The prototype of superconducting X-ray detector is developed, for high-sensitivity detection of impurities by measuring fluorescent X-ray. Development of the 10kW-class solid-state, rod-type laser is started for high-speed, high-precision laser-aided welding and cutting, and output of 11.3kW and electrical/optical conversion efficiency of 21.5% are achieved. An electrical/optical conversion efficiency of 17% is also achieved with the slab-type laser. An all-solid-state laser is being developed. It will produce high-energy pulses and high-quality beams capable of generating the beams which are converged very finely on the work with an average output power of 1KW (fundamental wave) and electrical/optical conversion efficiency of at least 20%. (NEDO)

  16. Report on the results of the FY 1999 study on the standardization of the measuring/database method for data on human body shape characteristics; 1999 nendo shinki sangyo ikusei sokkogata kokusai hyojun kaihatsu jigyo. Shintai keitai tokusei data no keisoku database ka shuho ni kakawaru hyojunka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The purpose of the present project is to conduct studies on three-dimensional human body measurement; the method of describing measurement results; the method of developing a database using measurement data; and the method of statistical data processing. Results of these studies are to be used to establish an international standard on three-dimensional human shape data. In the course of the project, the state of relevant studies conducted outside Japan was investigated. As a result, it has been found that studies on the method of processing three-dimensional human body shape data are being promoted independently by different research institutes. At present, it is impossible to build up a consensus on the method among these institutes. Additionally, standardizing the method may stifle the creativity of researchers. We have therefore decided to exclude the standardization of body shape data processing method from the scope of the project. Our conclusion is that the standard proposed in the project should be based on the human body shape data format, obtained through a study on the method of describing three-dimensional body shape data. And it should provide for a data format for three-dimensional human body measurement, which can store all data required for product of space design (e.g. data on human body sizes, landmarks and texture). According to our plan, this standard will be proposed in the form of a technical report, since it is yet too early to se out establishing the standard as an international standard. (NEDO)

  17. FY 1999 project on the development of new industry support type international standards. Standardization of methods to measure/evaluate characteristics of micro-machine use materials; 1999 nendo shinki sangyo shiengata kokusai hyojun kaihatsu jigyo seika hokokusho. Micro machine yo zairyo no tokusei keisoku hyoka hoho no hyojunka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Study was conducted with the aim of developing the standard tensile test method which enables the measurement/evaluation of mechanical properties of various kinds of thin film materials with thickness of 10{mu}m or below and width of 100{mu}m or below and of making it a draft for the international standards. The FY 1999 results were summarized. As to the Round Robin Test, Si test pieces were so fabricated by bulk micro-machining that comparisons in testing method can easily be made. Concerning the test machine, the measurement of deformation and strain of test pieces at the time of tensile test was made possible with the introduction of an optical microscope with interferometer and CCD camera for image processing. The measurement was also made possible of Young' modulus of polycrystal Si films of test pieces different in length. Relating to the optimization of standard test pieces, basic tests were carried out on the analysis of gradients of sputter thin films/the trend of grain formation state, measurement of residual stress of Ni plated films, etc. In the survey of the adaptability to standardization, it was found out that industrial circles in Europe and the U.S. are not interested in the standardization which produces no direct profits. (NEDO)

  18. Fiscal 2000 achievement report on research and development of intelligent infrastructure creation and utilization technologies. Research and development of fluid and high-temperature melt thermophysical property standard data and measuring technology; 2000 nendo chiteki kiban sose riyo gijutsu kenkyu kaihatsu jigyo seika hokokusho. Ryutai oyobi koonyutai no netsu bussei hyojun data to keisoku gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Thermophysical data relating to industrially important materials and substances were determined and collected for databasing. In the buildup of standard data for natural circulation substances and their water solution thermophysical characteristics, pure ammonia and aqueous ammonia, containing 51.95 mol% and 83.74 mol% of ammonia, were measured, and the excessive molar volume, isothermal compression rate, and the coefficient of volume expansion were acquired. In the buildup of standard data for polymeric thermophysical properties, blends of poly(PPO) and polystyrene were taken up, and the dependence of CO2 solubility on the composition was studied. In the buildup of standard data involving fluids mainly refrigerants, heat of evaporation, specific heat capacity of liquid refrigerant, and speed of sound in rarefied refrigerant gas were measured, and various apparatuses for measuring PVT (pressure, volume, temperature) were developed. In the buildup of standard data relating to the vapor-liquid equilibrium property of fluids, a tertiary system comprising water, alcohol, and a polymer of ethylene glycol at 298.15K was studied, and measured by use of a constant pressure flow type vapor-liquid equilibrium measuring apparatus. (NEDO)

  19. Fiscal 1999 report on basic research for promotion of joint implementation programs. Research on potential for higher energy efficiency through instrumentation, control, and energy saving equipment (Research report); 1999 nendo keisoku seigyo oyobi sho energy kiki ni yoru sho energy potential chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    As part of the 'clean development mechanism (CDM)' activities to be conducted by advanced nations jointly with developing nations, a survey is conducted of potential for higher energy efficiency, the effect of greenhouse gas reduction, and the effect of related investments in Egypt's textile (dyeing) industry. As the result, it is found that the Egyptian textile (dyeing) industry is rich in potential for higher energy efficiency and that intensification of energy management with importance attached to instrumentation will be quite effective. Private plants, though small in scale, enjoy a high operating rate and are full of life. As for their energy management, however, though management oriented instrumentation is found to stay without being scattered or lost in case of newly introduced equipment, normal operation is impeded by damaged parts which are not duly repaired or replaced. As for state operated plants, they are large in scale and are provided with some leading-edge facilities. Many of them are obsolete, however, and a privatization plan is under consideration, these discouraging investors and reducing vitality. Operation control or quality control are not sufficiently practiced in the administration of plants, and they need improvement. (NEDO)

  20. Report on achievements of research and development of a technology to apply human senses to measurements in fiscal 1992. 4. Research and development of a correlation and evaluation technology (Part 2); 1992 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu. 4. Sokan hyoka gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-03-01

    This paper describes the correlation and evaluation technology, extracted from the achievements in the development of a technology to apply human senses to measurements in fiscal 1992. In the comfort correlation in a composite environment composed mainly of warm heat environment, the experiment environment was improved, and collection was performed on basic data (cardiac blood vessel and respiration systems) required for developing a system to investigate correlation among external stimulating environment, physiological effect and sense volume based on a physiological reaction model. In evaluating the composite environment comfort, development and improvement were given on component technologies to present experimental environment for warm heat, light beam, and sound. In a space-type human interface system that adapts to human senses, the prototype system of a development platform was completed of mounting as much as half based on the basic design. Discussions were given on findings in computer inputs of eyeball movement information, and on correlation measurement of factors for visual sense operation environment affecting mental burden feeling. With regard to the human comfort meter, satisfactory result was obtained on developing structures for warm heat feeling elements and a control system for the whole body integration, and on defining the detailed specifications. However, designing of a comfort determining software has not achieved the target. (NEDO)

  1. Report on achievements of research and development of a technology to apply human senses to measurements in fiscal 1993. 4. Research and development of correlation and evaluation technology (Part 1); Ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu. 4. Sokan hyoka gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    The achievements during fiscal 1993 of research and development on a method to evaluate warm heat comfort by living scenes of workers by using a human body thermal model included completion of a human thermal model introduced with physiological knowledge such as artery-vein anastomosed (AVA) blood vessels and two-system blood circulation net. The effectiveness of the model was experimented and verified. It was made possible to estimate the reversal phenomenon occurring in hot heat environment, in which skin temperatures at peripheral body parts rise higher than those in the body trunk part, and skin temperature distribution. In the correlation study to estimate statistically the sense volume from skin temperatures, it was possible to estimate significantly different sense volumes from face skin temperatures, but the estimation accuracy was low because of such factors as difference in individuals. What is important in enhancing the accuracy is to identify ecological reactions of human being caused from change in the sense volume, select effective parameters, and study the mechanisms. In order to develop stress relaxing scents, discussions were given on degree of subjectivity stress by question papers and cortisol concentration in saliva as the parameters. An experimental system was developed to measure the effects of the scents to relax work stresses. A screening method was developed, whereas effects of 15 kinds of scent materials were investigated. (NEDO)

  2. FY 1991 report on the results of the contract R and D of the human sense measuring application technology. 4. R and D of correlation/evaluation technology (1); 1991 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu seika hokokusho. 4. Sokan hyoka gijutsu no kenkyu kaihatsu (1)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-03-01

    As a part of the R and D of correlation/evaluation technology, the following R and D were conducted in this paper: (1) high accuracy real sense visual recognition; (2) working environment at nuclear power plant with human sense and affinity; (3) amenity correlation technology in the combined environment mainly of thermal environment. In (1), the following seven items were studied: software for high accuracy real sense visual recognition; software for detecting contact of human movement with object, etc.; improvement of performance of speed of CG image indicator; harmony between image expression and video presentation; software technology for high speed modeling; measuring system under the virtual reality; production of a set of prototype system. In (2), as the environment of nuclear power plant site, visual environment of centralized control room; audio-environment of machinery room, etc., and radio-environment; environment where people have to put on special working ware, etc. In (3), development of a system to examine correlations among external stimulus environment/physiological effect/sensory quantity based on physiological reaction models; development of technology to quantitatively estimate amenity in the combined environment mainly of thermal environment. (NEDO)

  3. Report of FY 1997 on the international cooperation project. Survey of globalization of the effective energy resource utilization technology (development of high-accuracy acceleration measurement system); 1997 nendo kokusai kenkyu kyoryoku jigyo. Energy shigen yuko riyo gijutsu kenkyu kokusaika chosa (koseido kasokudo keisoku system no kaihatsu chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This report describes effectiveness of a system for measuring the acceleration and force in high accuracy by combining a laser interference meter and a vibration stand. A possibility of pressure sensitive paper to the impact force measurement in the collision examination is also described. The results obtained in FY 1997 are as follows. For the investigation of calibration system of acceleration and force sensor, one-dimensional interferometer system has been developed, which is standardized in ISO5347 accelerometer calibration. Thus, an interference fringe processing software has been made. Moreover, construction of a three-dimensional interferometer system has been started. For the characterization evaluation of pressure sensitive papers, it was succeeded in obtaining an elasticity wave pulse maximum about 1 msec by adopting the flight body made of resin. As a result, evaluation of the force sensor in the frequency area has become possible. To calculate the displacement of a body structural material in the collision experiment, an acceleration sensor has been made for trial purposes. For the international research cooperation, the working plan of a joint research with US Texas Christian University has been concluded. 11 refs., 73 figs., 23 tabs.

  4. Report on achievements of commissioned studies on research and development of a technology to apply human senses to measurements in fiscal 1994. 2. Main issue (Part 5 for research and development of a correlation and evaluation technology); 1994 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu. 2. Honronhen (Sokan hyoka gijutsu no kenkyu kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    This paper describes the research and development of (1) working environment having human senses and affinity at nuclear electric power plants, (2) a correlation technology for comfort in composite environments composed mainly of warm heat environment, (3) space-type human interface adapted to human senses, and (4) a human comfort meter. With regard to the subject (1), improvements were made on the experimental facilities, data processing systems, and environment improving devices, and data were collected and evaluated from subject experiments. With regard to the subject (2), 'development of a system to investigate correlation among externally stimulating environment, physiological effects, and sense volume based on a physiological reaction model', and 'research and development of a quantitative evaluation technology for comfort in composite environments composed mainly of warm heat environment' were executed. With respect to the subject (3), 'measurement of factors in visual sense operating environment affecting mental burden feeling', 'development of space-type human interface', and 'research on a method to utilize the eyeball movement information' were carried out. With regard to the subject (4), a warm heat sensing element structure was developed. In addition, a comfort determining software was completed that calculates hot-cold heat sense of a human body from different conditions of the warm heat sensing elements. (NEDO)

  5. Report on achievements of research and development of a technology to apply human senses to measurements in fiscal 1992. 4. Research and development of a correlation and evaluation technology (Part 1); 1992 nendo ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu. 4. Sokan hyoka gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-03-01

    This paper describes the correlation and evaluation technology, extracted from the achievements in the development of a technology to apply human senses to measurements in fiscal 1992. In evaluating the warm heat comfort by living scenes of workers according to the human body thermal model, the research environment was improved by expanding the systems to measure physiological volume and the warm heat environment. Findings were acquired on the relationship between body fat rate and skin temperature, and actions of artery-vein anastomosed (AVA) blood vessels. These findings were incorporated into the research to elevate the levels of applicability of the human body thermal model. In estimating the sense volume by using skin temperatures, physiological volume being the factor of variation in face skin temperatures was elucidated, and a system to measure these variations was structured. In order to acquire the physiological volume being the factor of variation in face skin temperatures, brain wave topography measurement and {alpha} frequency fluctuation and arousal evaluation and measurement were experimented, where the effectiveness thereof was verified. Analysis was also made on blood flow rate and perspiration volume related to skin temperature variation mechanism, which has provided a number of fundamental data. For the stress measuring technology, and stress relaxation by means of scent, researches were moved forward mainly on environment improvement and preliminary discussions. (NEDO)

  6. Report on achievements of research and development of a technology to apply human senses to measurements in fiscal 1993. 4. Research and development of correlation and evaluation technology (Part 2); Ningen kankaku keisoku oyo gijutsu no kenkyu kaihatsu. 4. Sokan hyoka gijutsu no kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    Developments were performed during fiscal 1993 on a system to investigate correlation among external stimulating environment, physiological effects and sense volume based on a physiological reaction model. The development works included improvement of the model, discussions on a method to estimate parameters inside living organisms, and a method to collect subjectivity volume data. Prototypes thereof were fabricated, evaluated, and experimented, where nearly complete achievement of the targeted functions was verified. In developing a technology to evaluate quantitatively the comfort of composite environments composed mainly of warm heat environment, discussions were given on an integration evaluating expression in order not to make handling the environmental physical volume too complex. The expression models the evaluation of governing sense volume in individual environments of warm heat, light beam, and sound, and calculates the composite environment evaluation indexes by using the evaluation indexes obtained from the modeling as the descriptive variables. In developing the space-type human interface adapted to human senses, a computer system to realize the interface and the platform for function mounting were developed. The development items were broken down respectively on the basic technologies for functional aspect and surveillance and control function mounting, and the software systems. The human comfort meter achieved the basic design target. (NEDO)

  7. Fiscal 1997 report under consignment from NEDO on photon measuring/processing technology (development of power generation facility use high-function maintenance technology); 1997 nendo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku photon keisoku kako gijutsu (hatsuden shisetsuyo kokino maintenance gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    A research/development was conducted on technologies of photon applied measuring/photon applied processing/photon generation which are usable for heightening of reliability and maintenance efficiency of power generation facilities. In fiscal 1997, high melting-point metal particles were manufactured by high energy density laser for formation of high temperature and stabilized fine functional circuit. Further, a wavelength changeable ultra red laser light source was studied which can make in-situ measurement of gas concentration and components. A study was also made to examine the surface composition by measuring fluorescent X-rays emitted by radiating high intensity laser beam on the surface of material. A rod type and a slab type as a high-output complete-solidified laser are under development. There is also a development aiming at high speed/high quality photon processing such as high speed/high precision welding/cutting and laser joining. Besides, a study is being made of high energy pulse/high quality beam complete-solidified laser. The paper made a comprehensive survey of the trend of the photon measuring/monitoring technology, and made a systematical arrangement of the developmental subjects extracted. 142 refs., 357 figs., 62 tabs.

  8. Fiscal 1997 report on the results of the international standardization R and D. Measurement of ultra-micro chemical substances and measuring methods of hormone effects; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Chobiryo kagaku busshitsu no keisoku horumon eikyo sayo sokuteiho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Concerning the measurement system of ultra-micro hazardous chemical substances in the global environment, the paper examined the present situation of chemical substances such as dioxins, made an experimental study on the method to analyze dioxins in exhaust gas from an aspect of international consistency, and worked out a JIS draft. As to the standard measuring method of hormone effects of chemical substances, the paper developed the competitive bonding experiment system to measure bonding ability of chemical substances to homo sapiens estrogen receptor (ER). By measuring ER bonding ability of 78 kinds of chemical substances, the measuring method was developed. In the development of the assay system for detection of hormone-like compounds, the assay system with transfer activity via estrogen receptor as an index was established using cultured cells and yeast. Further, the development was made of a measuring method of receptor bonding activity of hormone-like substances. 33 refs., 151 figs., 66 tabs.

  9. Fiscal 1999 geothermal energy development promotion survey. Report on environmental impact survey - 5 (Musadake area); 1999 nendo chinetsu kaihatsu sokushin chosa. Kankyo eikyo chosa hokokusho (No.B-5 Musadake chiiki)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-01-01

    For the purpose of clarifying the environmental impact to result from the digging of borehole N11-MD-3 in Shibetsu-gun, Hokkaido, a survey was conducted of changes in (1) hot spring water quality, (2) noise/vibration pollution, and (3) air pollution due to hydrogen sulfide, before and after the digging period. Under item (1), measurements were made at four hot springs, which involved weather, air temperature, water temperature, amount of welled-up water, pH, electric conductivity, etc. Although minor changes were observed during the measuring period, none was found related to the digging process. Under item (2), noise levels were measured during the drilling period along the site boundary, at a point 500m from N11-MD-3, the Kawakita hot spring, and the entrance of Sekiyunosawa. Along the site boundary, they were 55-60 dB during the drilling period, and there was an increase of 30dB attributable to the drilling. At the 500m point, there was a 15-20dB increase attributable to the same. Vibration levels during the drilling period were 40dB along the site boundary and less than the observable minimum at the other points. Under item (3), at four points along the site boundary (50m), hydrogen sulfide concentration in the air fluctuated by 0.01-0.21ppm when the steam discharge rate was 4.47-7.20t/h. (NEDO)

  10. Report of a project for the technical development of the environmental preservation and resource effective utilization system in fiscal 1995; 1995 nendo kankyo hozen shigen yuko riyo system gijutsu kaihatsu jigyo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The paper outlined the present situation of industrial waste all over Japan and the present situation of industrial waste of large urban areas where it is most difficult to secure places for the final disposal, and conducted an analysis on the present and future amount of final disposal waste. According to the literature from the Ministry of Health and Welfare, `research report on the discharge/treatment situation of the industrial waste` and `research results of administrative organizations for industrial waste,` the situation of final disposal from the past to the present was outlined and analyzed to study the future trend. Out of the administrative divisions of Japan, four divisions, which are all typically called large urban areas, were selected, and the situation of industrial waste in large urban areas was outlined and analyzed according to the questionnaire survey and the literature on industrial waste obtained from each administrative division. The survey by the Ministry of Health and Welfare indicated that the volume of the industrial waste discharged from the whole country amounted to approximately 400 million tons in fiscal 1992. However, helped by the improving recycling of waste construction materials, the amount of final disposal around 2000 is presumed to be less by 20% or so than that in 1992. 58 refs., 5 tabs.

  11. Manufacturing facilities of pharmaceutical products and measures for purification of its environment. Validation for sterilizing grade filter; Iyakuhin no seizo shisetsu to kankyo seijoka taisaku. Mekkin`yo firuta no barideshon

    Energy Technology Data Exchange (ETDEWEB)

    Nishiyama, M.

    1994-07-31

    Validation is defined as firm establishment of a documentary evidence showing the system concerned is functioning as designed. Validation for sterilizing grade filter is not limited only to validation of the filter itself, but evaluation of its extract as well as adsorption and the sterilizing condition of the filter and system are the items to be examined. It is necessary to make validation of the filtering system as a whole taking into consideration any kind of element of composition in order to reach the target. In this article, in order to avoid description on diversified subjects, only validation for the filter is focused and its technique is introduced. The procedure for executing validation is stated first, and concerning validation for the sterilizing grade filter, a bacterial retention test is explained in detail, then with regard to an integrity test, sterilization of the devise concerned and pharmaceutical suitability/extract tests, the points which call special attention and testing items are introduced. Finally self inspection and evaluation of operating performance qualification are described. 13 refs., 7 figs., 2 tabs.

  12. Achievement report for fiscal 1999. Research and development of high-performance magnetic materials creation technology making use of microgravitational environment; 1999 nendo bisho juryoku kankyo wo riyoshita koseino jisei zairyo sosei gijutsu no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Efforts are made to develop the above-named technology so as to improve on performance of magnetic materials for magnets extensively used in electric motors to consequently influence their energy conversion efficiency. For this purpose, probes are conducted into novel alloy phases, intermetallic compounds, and microstructure in a containerless coagulation process in which a molten body of a magnetic metal material in free-fall is allowed to cool rapidly, and a system is developed to enable a series of processes of heating and melting in preparation for containerless coagulation, specimen formation, and then coagulation in a microgravitational environment. The system is used for the study of novel materials for magnetic alloys and process technology. For the utilization of containerless coagulation in a microgravitational environment, it is necessary to make full use of the JAMIC (Japan Microgravity Center) facilities, and an experimenting apparatuses are fabricated for a containerless coagulation process and unidirectional coagulation process applicable to a free-fall test. In this fiscal year, some significance involving for example structural uniformity are found among the specimens created using containerless coagulation in a microgravitational environment, and it is inferred that the data as an index of higher performance will lead to studies in the next fiscal year and afterward. (NEDO)

  13. FY 2000 project on the research cooperation for the environmental response type water resource effective utilization system; 2000 nendo kenkyu kyoryoku jigyo. Kankyo taiogata mizu shigen yuko riyo system ni kansuru kenkyu kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of prevention of water pollution, stable water supply in the Philippines, etc., developmental study was made of a waste water treatment/water recycling system, and the FY 2000 results were summed up. In the operational study of Pilot Plant 1, for the waste water in the papermaking process of used paper recycling plant, development was studied of a waste water treatment/water recycling system. There occurred problems on minuteness, outflow, etc. of anaerobic granules, but those were caused by malfunction of SS removal equipment at plant side. The problems were solved by increasing flocculation/precipitation facilities. As to Pilot Plant 2 of which the R and D are planned to be started in April 2001, the food processing plant was surveyed for study, and SYSCORE was selected. Relating to the waste water treatment test of Pilot Plant 2, researchers of the Industrial Technology Development Institute (ITDI) of the Philippines conducted it under the guidance of the experimental data analysis. Besides, the paper carried out the training for technology spread/acceptance, technology spread seminar, support study in Japan, etc. (NEDO)

  14. Report on fiscal 2000 geothermal development promotion survey. No. C-5 Appi district environmental impact survey (1st phase); 2000 nendo chinetsu kaihatsu sokushin chosa hokokusho - No.C-5. 1. Appi chiiki kankyo eikyo chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-08-01

    For the survey of weather in the Appi district, Iwate Prefecture, observation data covering the last decade were collected at weather stations and the like, and characteristics of weather, climate, and natural earthquakes were learned. In the survey of fluctuation in the spa water level, studies were made about fluctuation in water temperature, spring water, and river water, and basic data were collected for the examination of the impact to be generated by geothermal exploration well boring and short-term discharge tests. In the survey of animal and vegetables, the habitation and distribution of animals and vegetables at sites planned for geothermal well boring were investigated, and data were collected for the evaluation of the impact to be imposed on them by well boring or the like. In the survey dealing with nature conservation and landscape, laws and regulations governing nature conservation were collected and put in an easy-to-use order, and seasonal changes in the natural landscape were photographed and recorded. In the survey of noise/vibration and ground fluctuation, the background values were measured prior to the implementation of geothermal well boring, discharge tests, and so forth. (NEDO)

  15. Relationship of responsible Care and Environmental Management Systems Standard ISO 14001. Example of Sumitomo Chemical; Resuponshiburu{center_dot}kea to kankyo manejimento sisutemu kikaku ISO14001. Sumitomo kagaku no jirei

    Energy Technology Data Exchange (ETDEWEB)

    Kimura, Kazuo. [Sumitomo Chemical Corp., Tokyo (Japan)

    1999-01-15

    In the chemical sector, Responsible Care is propelled by the International Council of Chemical Associations (ICCA). The objective of Responsible Care is to improve the performance and reputation of the Chemical Industry in areas that impact on people and environment. Sumitomo Chemical is committed to supporting a continuing effort to improve the chemical industry`s responsible management of chemicals through the Japan Responsible Vare Vouncil program. One the other hand, ISO 14001 had been published on Aug.1996 and have adopted the ISO 14001 as national standards on Oct. 1996. Already 973 companies in Japan, 74 of them in the chemical sector, have been certified to ISO 14001. In this paper, I provides concise commentaries on how Responsible Care and Environmental management systems work in the chemical sector. (author)

  16. Relationship of responsible Care and Environmental Management Systems Standard ISO 14001. Example of Sumitomo Chemical. Resuponshiburu[center dot]kea to kankyo manejimento sisutemu kikaku ISO14001. Sumitomo kagaku no jirei

    Energy Technology Data Exchange (ETDEWEB)

    Kimura, Kazuo. (Sumitomo Chemical Corp., Tokyo (Japan))

    1999-01-15

    In the chemical sector, Responsible Care is propelled by the International Council of Chemical Associations (ICCA). The objective of Responsible Care is to improve the performance and reputation of the Chemical Industry in areas that impact on people and environment. Sumitomo Chemical is committed to supporting a continuing effort to improve the chemical industry's responsible management of chemicals through the Japan Responsible Vare Vouncil program. One the other hand, ISO 14001 had been published on Aug.1996 and have adopted the ISO 14001 as national standards on Oct. 1996. Already 973 companies in Japan, 74 of them in the chemical sector, have been certified to ISO 14001. In this paper, I provides concise commentaries on how Responsible Care and Environmental management systems work in the chemical sector. (author)

  17. Study of promotion of CO2 fixation by the environmental improvement in the coral reef area; Kansho chitai ni okeru kankyo kaizen ni yoru CO2 kotei sokushin no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Maruoka, T.; Ishitani, H.; Matsuhashi, R.; Yamada, K.; Komiyama, H.; Kraines, S. [The University of Tokyo, Tokyo (Japan). Faculty of Engineering

    1997-01-30

    A study was conducted on how to fix CO2 in the ocean using coral reefs. Coral reefs have extremely high primary productivity ( production quantity of organic matters by photosynthesis) and are expected to be resources to fix CO2 when the quantity of photosynthesis exceeds the quantity of CO2 emitted in association with formation of calcium carbonate skeleton. If organic substances produced in coral reefs are well carried into the open sea, those are settled down on deep beds, which enables the storage into the ocean. At the coral reef floating in the ocean, it is not very deep inside and the seawater stays there, but it has a steep depth outside. By the numerical calculation, an examination was made on how the waterflow changes when making the flow path of seawater between the inland sea and open sea. From the actual calculation of an atoll, it was found that seawater comes in and out from the open sea to the inland sea near the opening of the atoll in accordance with the high tide and ebb tide, but the water stays at the deep bottom of the atoll. When installing a channel with a 10m depth at the portion where the water flows softly, the seawater was actively exchanged. 6 refs., 4 figs.

  18. Report on a fiscal 1995 basic survey of the environmental engineering. Investigational survey on the improvement of the waste treatment system; 1995 nendo kankyo business no engineering ka kiso chosa hokokusho. Haikibutsu shori system no kodoka ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-05-01

    The paper described the present situation of the waste treatment system for the environmental engineering and the problems. The final waste treatment plants are in the tighter and tighter condition, and therefore the waste treatment system ought to be changed to a system in which importance is placed on the size reduction, weight reduction, and recycle. Accordingly, the waste treatment system becomes more characterized as a resource feedback process, and should be given more credit as a system for production of secondary resource. The problem is arrangement of conditions of technology, cost and legislation system for smoothing such recycling flow. Of course, it is natural that the most important subject of the system is to secure the environmental preservation by the waste treatment. As future subjects, needed are understanding of the waste treatment as a resource reproductive system, relation with other industries, and review of the legislation system. In consideration of technology, cost and environmental loads, required are proposal of validity of the recycle level limit and a future image of the system structure, and policies for promoting and supporting the recycle business. 47 figs., 104 tabs.

  19. Fiscal 1998 research report. Feasibility study on next-generation environment-friendly urban transport systems; 1998 nendo chosa hokokusho. Jisedai kankyo kyosei toshi kotsu system donyu kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This research arranges recent public transport system technologies such as LRT, and clarifies their technical issues to be overcome and developmental courses, and the improvement effect of their energy efficiency and CO{sub 2} reduction effect by such measures to contribute to development of next-generation public transport systems. The outlines and features of LRT, monorail/trolley bus and AGT as existing public transport systems are arranged. In the EU, development of tramways using rubber tires is in promotion. The concept of a next-generation environment- friendly urban transport system is prepared based on features of every public transport system. Since a trolley system causes traffic congestion and environment deterioration, introduction of an independent transport system with fuel cell is necessary in the future. The technical issues and solutions for construction of the next-generation transport systems are analyzed. Fuel cell and ITS are important candidates. Substitution of the next-generation transport system for existing buses showed a CO{sub 2} reduction effect of 3.91 Mton/y in Japan. (NEDO)

  20. Fiscal 1999 survey report. Survey of environmental effect pertaining to survey for geothermal development and promotion (Hakusuigoe area); 1999 nendo chinetsu kaihatsu sokushin chosa no uchi kankyo eikyo chosa (Hakusuigoe chiiki) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This survey of environmental effect was intended to grasp actual state concerning some environmental factors that should agree with survey/development and also to assess its effect on the surrounding environment, particularly as a part of the 'stage C' in the 'survey for geothermal development and promotion', which was implemented by the Government for the purpose of guiding geothermal development by enterprises. This report compiles the plan details of the environmental effect survey to be conducted in the Hakusuigoe district, and presents proposals. The survey area is in the north of Makizono-cho, Aira-gun, in Kagoshima prefecture and situated about 3 km west of Onaminoike in Karakunidake, one of the peaks in the Kirishima mountain range. The Ogiri geothermal power plant is in the west of the site, a tourist spot Ebino Heights about 4 km northeast, and the Kirishima hot-spring about 4 km southeast. The location is in the national park, with a part designated as No. 2 and 3 class special areas. The environmental effect survey was divided broadly into such categories as fauna/flora, hot-spring water alteration and inland water, landscape, noise/vibration/subsoil, and air/water, and was further subdivided in accordance with the actual operations. (NEDO)

  1. FY 1999 report on the results of the development of technology of the environmentally friendly next generation small incinerator; 1999 nendo kankyo taio jisedai kogata shokyakuro gijutsu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The development was proceeded with of a next generation small incinerator of low dioxin emission. Concretely, the technology to be developed is for a next generation small incinerator of low dioxin emission in which the exhaust gas treatment system enabling various kinds of heat utilization is connected to the small incinerator mixing the fixed bed two stage combustion technology of industrial waste use low dioxin oxygen concentration control system and the high performance industrial furnace heat storage combustion technology. The trial-manufactured small incinerator has characteristics as follows: The incinerator can complement the decrease in efficiency in the wide-area refuse collection. It can remarkably reduce the emission of environmental pollutants such as CO2. It contributes to reduction in CO2 emission and reduction in fossil fuel consumption amount by effective utilization of exhaust heat. The incinerator is lower in price than the existing one of low dioxin emission type. The subjects are verification of the overall effect of the lower dioxin emission, verification of effects of reduction in CO2 emission and reduction in fossil fuel consumption amount by heat utilization, and study of the spread/promotion system. The report contains items of the development of an environmentally friendly next generation small incinerator and the evaluation survey for the commercialization, and photos as supplementary data. (NEDO)

  2. Fiscal 1998 achievement report on regional consortium research and development project. Venture business fostering regional consortium--Creation of key industries (Development of trace pollutant measuring device); 1998 nendo biryo kankyo busshitsu sokutei device no kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For measuring trace pollutants and for establishing a simplified high-speed method of assessing their impacts, research and development efforts are exerted to build measuring devices to meet the purpose. In relation with air pollutants, researches are conducted to develop a passive sampler technology-aided measuring devices capable of on-site analyses of trace pollutants. For the development of microchips to be the nuclei of such devices, studies are conducted about a gas absorbing chip consisting of porous quartz glass and a passive sampler installed thereon, a chemical reaction chip on which absorbed NO{sub 2} ions react with a fluorescent reagent, and an optical detection chip capable of high-sensitivity detection of a fluorescent substance generated by an ultraviolet emission device. As the result, an A4 size prototype of a trace NO{sub 2} measuring device is developed using a fluorescence detecting microchip system. In addition, a simplified measuring device is developed, in which gas absorbed at a polymer film flows in a very thin plastic-formed channel to reach an electrochemical detection system for measurement, and the device is found to work effectively. (NEDO)

  3. Fiscal 1998 research report. Research cooperation on car energy and environmental technology based on ITS technology in China; 1998 nendo seika hokokusho. Chugoku ni okeru ITS gijutsu wo mochiita jidosha energy kankyo gijutsu ni kansuru kenkyu kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This research aims at preparation of the car energy/environmental vision based on ITS (intelligent transport system) technology in China, enhancement of the transport planning ability of Qinghua University, and promotion of effective energy use in China. The following activities were carried out concretely: Survey on the actual traffic situation by Qinghua University, analysis of environment deterioration factors based on the survey result, estimation of a traffic environment improvement effect, study on traffic flow simulation technique based on traffic engineering, and study on traffic planning technique. As the diffusion strategy of ITS along Chinese circumstances, standardization and improvement of a multi- modal traffic system, navigation and its application system, and ETC (electronic toll collection) system are promising. Expectation for Japan and Japanese roles are as follows: Improvement of signal control, provision of information systems such as navigation, discussion on ITS technology such as ETC with Chinese specialists, and feasibility study on introduction of ITS technology for every Chinese district. (NEDO)

  4. Fiscal 1998 research report. R and D on advanced combustion technology under microgravity environment; 1998 nendo seika hokokusho. Bisho juryoku kankyo wo riyoshita kodo nensho gijutsu soshutsu ni kansuru kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Research was made on explication of a combustion phenomenon by using a microgravity facility, and a combustor possible to realize advanced combustion technology. In the basic research composed of 5 themes by the international joint research with NASA, 52 drop experiments using JAMIC's facility and 100 drop experiments using NASA's 2.2s drop tower were carried out. The themes are composed of an interaction in droplet arrays combustion, combustion of binary fuel sprays, combustion characteristics of solid fuel, flame dynamics around a lean flammability limit, and mass transfer around a combustion field. In the experiment using the microgravity experiment facility and analysis evaluation of the experimental data, studies were made on combustion and evaporation of fuel droplets, combustion characteristics of dense fuel, flammability limit, formation mechanism of NO{sub x} and an advanced combustor. For applying a pre-evaporating/pre- mixing combustion system to a combustor for aircraft engines, studies were made on some issues such as improvement of a combustion stability, NO{sub x} discharge characteristics, and optimum fuel atomizing. (NEDO)

  5. FY 1996 report on the cooperative research on the development of environmentally friendly high efficiency mineral resource extraction/treatment technology; 1996 nendo kankyo chowagata kokoritsu kobutsu shigen chushutsu shori gijutsu no kaihatsu ni kansuru kenkyu kyoryoku hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This promotion project on the cooperative research aims at developing technology to efficiently extract and recover valuable metals including in large quantity in tailings of ores in the Republic of Kazakhstan in consideration of the environmental harmony. The support study in Japan was conducted as follows. As to the Nikolayevska low grade ore, high leaching speed and high leaching rate by grain refining were made possible. The coarse grain was also possible of leaching if leached for a long time. The sulfide froth is possible of leaching in fine grain and in the temperature range of 50 degrees C. The Zhezkent tailings were possible of leaching with sulfuric acid, by aeration, and in the range of medium temperature. The sulfide froth was possible of leaching in fine grain and at temperature of 50 degrees C. After filtration/washing and regrinding, high sampling rates of bulk concentrate and pyrite concentrate were obtained by sulfide flotation by zanthate. The Zhezkent copper concentrate was tested on various factors such as grain size, temperature, and washing/no washing, to confirm effects of bacteria. In the pre-observation test on Au and Ag leaching, cyanogen leaching test was conducted using Cu leaching residue. About Cu, studied were leaching (vat leaching, flotation froth machine agitation (temperature increase, bacteria)), solvent extraction, and electrowinning. About Au and Ag, studied were cyanogen leaching and process of adsorption of activated carbon. (NEDO)

  6. Fiscal 1997 international cooperation project. Report on the results of the research on environmental harmony type combustion technology; 1997 nendo kokusai kenkyu kyoryoku jigyo. Kankyo chowagata nensho gijutsu ni kansuru kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Out of the R and D on the environmental harmony type combustion technology, the results of the project carried out in fiscal 1997 were summed up. In the site survey, etc., visits were paid to France, Spain, Greek, Germany, the U.K. and the U.S. to have discussions and examine the trend of research on the NOx removal catalyst and catalyst combustion. In the actual R and D, the R and D were conducted on zeolite base NOx removal catalyst, oxide composite base NOx removal catalyst, alumina base NOx removal catalyst, direct decomposition type NOx removal catalyst, catalyst combustion, etc. In the R and D of the catalyst combustion, durability under high gas flow flux was examined of PdO-Pt/Ba-Al203 catalyst developed for low temperature use, which indicated that durability and low temperature activity were heightened. As high temperature use catalyst, high temperature durability was examined of the developed Pd0-La/Gd-ZrO2 catalyst, which showed that the durability was favorable. 322 refs., 261 figs., 55 tabs.

  7. Fiscal 2000 achievement report. Environment-conscious industrial technology research and development project (Development of environmentally-friendly catalyst technology); 2000 nendo kankyo chowagata shokubai gijutsu kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Research and development and basic studies were conducted about novel catalysts which would help reduce impact on global environments. The efforts involved the development of (1) photocatalysts and (2) selective oxidation catalysts. In domain (1), a silicon semiconductor was manufactured for an integrated hydrogen generation catalytic membrane/silicon semiconductor/oxygen generation membrane system as a hybrid multilayer photocatalyst, and a fundamental one-layer type was fabricated. As for a system using a compound semiconductor CIGS (Cu(InGa)Se{sub 2})/CdS membrane, a CIGS membrane was completed, and CdS was deposited in layers to support platinum and it was found that water was decomposed under visible light irradiation although the bias voltage load was slight. In domain (2), the methanol and formaldehyde formation rates greatly increased when some MgO powder was installed in the reaction space in the vapor phase selective oxidation of methane in the presence of a catalyst which was a very small amount of nitrogen dioxide. (NEDO)

  8. Joint verification project on environmentally friendly coal utilization systems. Joint verification project on the water-saving coal preparation system; Kankyo chowagata sekitan riyo system kyodo jissho jigyo. Shosuigata sentan system kyodo jissho jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    In this verification project, clean technology which should be spread in China was verified and the base structure for its spread was prepared for the purpose of controlling emissions of environmental pollutants associated with the coal utilization in China and of contributing to secure energy acquisition of Japan. As joint verification projects, a general rehabilitation type coal preparation system was installed in the Wangfenggang coal preparation plant, and a central control coal preparation system was installed in the Qingtan coal preparation plant. In the former, a system is verified in which optimum operation, water-saving, high quality, and heightening of efficiency can be obtained by introducing two computing systems for operation control and quality control, various measuring instruments, and analyzers to coal preparation plants where analog operation is conducted helped by Russia and Porland and have problems about quality control. In the latter, a central control system achieving water saving is verified by introducing rapid ash meters, scales, desitometers and computers to coal preparation plants having zigzag or heavy-fluid cyclon and connecting various kinds of information through network. For fiscal 1994, investigation and study were conducted. 51 figs., 9 tabs.

  9. Fiscal 1995 survey report on the environmentally friendly type coal utilization system joint demonstration project. Water-saving coal preparation system joint demonstration project; Kankyo chowagata sekitan riyo system kyodo jissho jigyo. Shosuigata sentan system kyodo jissho jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This project makes demonstration of clean coal technology (CCT) in China and preparation for the base of its spread, controlled environmental pollution due to the coal use by the countries concerned, and contributes to stably secure energy of Japan. The paper made analog operation in the 1960s-1970s, supported by Russia and Poland, introduced two computer systems for operational control and quality control, densimeter, level meter, flow meter and analyzer to coal preparation plants having problems on productivity and quality control, made the optimum operational diagnosis for the plants, and at the same time, demonstrated the comprehensive rehabilitation type system by which water saving, high quality and high effectiveness are obtained. Various types of sensors such as rapid ash meter, scale and densitometer and computers are introduced to coal preparation plants which were recently constructed in China, have jig or heavy liquid cyclone as main preparation equipment and conducts operational control. There, the central control system was demonstrated in which various information collected in the central operation room and in-site equipment is combined by network for high-grade data processing and water saving is achieved. 50 figs., 11 tabs.

  10. Fiscal 2000 survey report. Research on laser-aided photolysis of environmental pollutant in liquid phase system; 2000 nendo ekisokei ni okeru kankyo osen busshitsu no laser hikari bunkai gijutsu ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Experiments were conducted on laser-aided decomposition and removal of chemical substances in liquid phase systems on the assumption that there existed chemical pollutants in wastewater or water after washing burned ash. The aim of the research was to split carbon-chlorine bonds and break benzene rings, the two being the cause of harmfulness, and experiments were conducted using chlorophenol. The photolytic lasers were ArF excimer laser and KrF excimer laser. It was found that the reduction rate of chlorophenol in a water solution under excimer laser irradiation was 1.7 times higher under KrF laser than under ArF laser. For mediums other than water, isopropanol was used, more convenient than chlorophenol in separating organic pollutants from burned ash and the like. In this case, organochlorine compounds were generated at the beginning, but they disappeared when irradiation was prolonged. It was demonstrated that the laser-aided environmental cleaning technology would find a very wide scope of application as an effective photolytic means. (NEDO)

  11. Metabolism of pure sulfate-reducing bacteria in the presence of ferrous ions and environmental chages of the medium; Tetsu ion sonzaika ni okeru junsuina ryusan`en kangenkin no taisha to baichi no kankyo henka

    Energy Technology Data Exchange (ETDEWEB)

    Baba, F.; Suzuki, T. [Ajinomoto Co. Inc., Kawasaki (Japan). Technology and Engineering Lab.; Seo, M. [Hokkaido Univ., Sapporo (Japan). Graduate School of Engineering

    1996-10-15

    In this study, the pure sulfate-reducing bacteria were cultured in the medium with different Fe{sup 2+} concentration; shape and activity of the bacteria, the evolution amount of hydrogen sulfide directly related to the breath of the sulfuric acid and the change of the pH value in the medium were investigated during every time interval; and influence on the metabolism of the sulfate-reducing bacteria with Fe{sup 2+} was examined. As a result, the conclusions were obtained as follows: in the case of a medium with high Fe{sup 2+} concentration containing Fe{sup 2+} of 1.0{times}10{sup -2} molkg{sup -1}, the colloidal substance in which the main composition was considered as Fe(OH)2 were present, and they provided a comfortable place for the bacteria to grow. Correspondingly, in the case of a medium with low Fe{sup 2+} concentration containing Fe{sup 2+} of 3.6{times}10{sup -4} molkg{sup -1}, the colloidal substance was small and the number of bacteria was also few. The four kinds of shape of bacteria coexisted in the medium with increasing the culturing time. The hydrogen sulfide was mainly evolved by the bacteria with the comma like shape. During a period that this comma like bacteria actively moved, the hydrogen sulfide evolution increased. 13 refs., 6 figs., 1 tab.

  12. FY 1998 geothermal development promotion survey. Report on the environmental effect survey (animals/plants, No. B-7 Kuwanosawa area); 1998 nendo chinetsu kaihatsu sokushin chosa. Kankyo eikyo chosa hokokusho (doshokubutsu, No.B-7 Kuwanosawa chiiki)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This survey was conducted to estimate effects of drilling of geothermal exploration well on the environment, aiming at grasping the present state of environmental elements before the survey/development. As a result of the literature survey, the following distribution were confirmed in the fauna: 5 orders 10 families 19 species in the mammalia, 10 orders 25 families 73 species in the aves, 1 order 3 families 6 species in the reptilia, 2 orders 6 families 9 species in the amphibia, and 17 orders 179 families 719 species in the insecta. In the flora, a distribution of 132 families 670 species was confirmed. The results of studying the above indicated that in the fauna, there were 10 species such as antelope as valuable animal in the area surveyed and that it is necessary to pay much attention to the environmental preservation of the habitat for those animals in the well drilling associated with geothermal survey. In the flora, the 13 valuable animals selected as animal having a fear of extinction in the 'plant-version red list' were confirmed in the area surveyed and the periphery. Further, as to the plant colony, there are no important colonies in terms of preservation. In well drilling, important things are efforts exerted to restore to the original state of the area altered, prevention of the washed-away of mud water, etc., and efforts exerted to preserve the environment of vegetation. (NEDO)

  13. Fiscal 1997 report on the environment friendly type coal utilization technology transfer project. Downstream field; 1997 nendo gyomu hokokusho. Kankyo chowagata sekitan riyo gijutsu iten jigyo (karyu bun`ya)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    For the purpose of supporting the introduction/spread of clean coal technology (CCT) in countries in Asia and the Pacific, engineers of the countries concerned were invited to Japan aiming to ferment the understanding of CCT and improve abilities of them. The project was carried out by NEDO, and managed by CCUJ. It has two courses. The manager course is for policy makers, management and senior managers. By assessing CCT and presenting a menu for economical efficiency, environmental arrangement for CCT introduction is made in working out policies and planning plant/equipment investment in the future. The engineer course is for policy planners, mid-class managers and senior engineers. It proposes data on which to base a decision in working out/planning CCT facilities, and at the same time ideas by which to reduce environmental loads by management of facilities, simple improvements, etc. The number of the persons invited are 21, that is, 8 from China, 5 from Indonesia, 4 from the Philippines and 4 from Thailand. After the training, future subjects were summed up

  14. New energy visions for the Town of Naie district. Human-friendly Town of Naie City by environment-friendly energies; Naiemachi chiiki shin energy vision. Kankyo ni yasashii energy ga tsukuru hito ni yasashii machi Naie

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The new energy visions are drawn for Town of Naie, Sorachi-gun in Hokkaido, where the industrial sector (manufacturing industries) consumes more than 60% of the total energy consumption. By energy type, oil and others account for 80%. When arranged in the order of expected recoverable quantity, the new energies for the town include utilization of solar energy, photovoltaic power generation, wind power generation, and utilization of wastes, biomass energy (agricultural products) and snow energy. The basic guidelines for introduction of new energies are for health and welfare, clearing and utilization of snow, environmental education and bringing up talented persons, supporting the related entrepreneurs, and integration of new energy with promotion of energy-saving movement. The priority projects the town plans to promote include utilization of biogas and temperature-differential energy for the town's water purification center; foundation of the Naie eco-school; and drawing conceptions for utilization of underground heat, utilization of low-temperature and snow/ice energy, co-energy around the spa of Naie, and mega-solar and eco-park at the Sorachi housing complex. (NEDO)

  15. Leading research report for fiscal 1998. Research and study of ozone-aided technologies for creating amenity-rich environments; 1998 nendo sendo chosa kenkyu hokokusho. Ozon riyo kaiteki kankyo sozo gijutsu no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Researches were conducted aiming at the establishment of an ozone-aided highly efficient decomposition process for the persistent organic matters in municipal sewage and industrial wastewater. Tested for verification were advanced water treatment technologies of the biological function acceleration type and the effect of their combination with the accelerated oxidation method, conditions necessary for efficient operation, and water treatment apparatuses and systems for operating them at high efficiency. Some findings are stated below. With an ozone-aided process performed at the first stage of biological treatment, biological decomposition is accelerated for a rise in the persistent organic matter decomposition rate. This is nothing but a finding in the laboratory, however, and much remains to be disclosed concerning the optimum conditions, reforming of sludge to be generated, volume reduction of the same, etc. Another finding involves the acceleration of decomposition of persistent organic matters using ozone in combination with hydrogen peroxide, ultraviolet radiation, titanium oxide, and the like. There still remain numerous tasks to carry out, however, which relate to the investigation of the reaction mechanism, establishment of operating conditions and criteria for selecting oxidants, etc. As for ozone, remaining to be solved are the problems of generation cost, storage and preservation, and safety. (NEDO)

  16. Fiscal 2000 feasibility research on environmentally friendly coal utilization system. Seminar holding project (China: Zaozhuang, Yanshan, Jianshan, Jinzhou); 2000 nendo kankyo chowagata sekitan riyo system kanosei chosa hokokusho. Seminar kaisai jigyo (Chugoku Zhaozhuang, Yanshan, Jianshan, Jinzhou)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Seminars were held in China for the delivery of reports on the results of model projects with a view to popularizing the results of the clean coal technology model projects, which had been completed, for the purpose of contributing to the improvement on coal utilization technology and to the enhancement of environmental protection. The seminars took place at the sites of demonstration model projects just completed in China, namely, Zhejiang Huba Corporation (low-grade coal combustion system); Chaili Colliery, Zaozhuang Coal Mining Administration (CFBC - circulating fluidized bed combustion); Jinzhou Heat Power General Co., Ltd. (CFBC); and Beijing Yanshan Petrochemical Corporation (desulfurizing agent-added coal-water mixture system). At each of the project implementation sites, lectures were given on technical matters, technical know-how was exchanged, and study tours were organized to facilities concerned, which meant to promote the diffusion of the related technologies throughout China and, eventually, to contribute to the enhancement of environmental protection. The main subjects at the seminars included the introduction of GAP (green aid plan) projects in China, introduction of the outlines of technologies related to the model projects, verification and achievements, latest trends, and measures for the diffusion of the technologies. Study tours were made, and videos were shown relating to the local conditions. Every one of the seminars was successfully attended by 60-70 participants. (NEDO)

  17. FY 2000 report on the survey of a potentiality of the environmental harmony type coal utilization system. Dispatch of engineers; 2000 nendo kankyo chowagata sekitan riyo system kanosei chosa hokokusho. Senmonka haken

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of contributing to improvement in coal utilization technology and environmental conservation in developing countries, a survey project on the dispatch of engineers was carried out, and the FY 2000 results were summed up. The survey was conducted in terms of the operational state of the model project already finished in China, the present state of the model project on the circulating fluidized bed boiler in Indonesia, and the strategy to be worked out for spread of clean coal technology (CCT). In China, it was confirmed that 10 sites where the project had been finished are in a state of the appropriate operation. Further, problems on each model were grasped/analyzed by questionnaire survey. The model project on the circulating fluidized bed boiler in Banyuwangi, Indonesia, has been suspended about three years, affected by the serious economic crisis. Survey was made and advice was given for the state of facility/equipment maintenance so that the facility/equipment can be used at the time of resuming the project. As to the strategy to be worked out for CCT spread, questionnaire survey and hearing were carried out for Japan-side makers. Study/analysis of subjects/important points for the spread were made. (NEDO)

  18. Report on the FY 1999 study of the decomposition/removal of environmental pollutants using laser induced chemical reaction; 1999 nendo laser yuki kagaku hanno wo mochiita kankyo osen busshitsu no bunkai jokyo ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the cleavage of carbon-chlorine connection and decomposition of benzene rings which are hazardous causes of the environmental pollutants represented by dioxins, the photolysis of gaseous phase chlorobenzene used as a model compound was made using KrF and ArF excimer laser. The decomposition is high efficiency, and ArF shorter in wavelength can be compounded twice-four times as fast as KrF. It was found out that in the system where oxygen exists, carbon monoxide, carbon dioxide, acetylene, hydrogen chloride, etc. are produced as decomposition products. From the results of the gaschromatographical analysis, chlorine compounds were detected as solid phase decomposition products. However, by the oxygen existence effect and laser shorter wavelength effect, the formation of polychlorinated aromatics was controlled, and chlorine compounds were made non-pollutant together with the composition. It was indicated that the environmental clean-up technology using laser is effective for making low-concentration environmental pollutants non-pollutant, and it is a method to clean up the environment which has a wide range of the application field. (NEDO)

  19. Report on regional new energy vision for Kawara town. Toward the creation of eco-symbiotic community (simplified version); Kawaracho chiiki shin energy vision gaiyoban. Kankyo kyoseigata shakai no sozo ni mukete

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-02-01

    A regional new energy vision has been formulated for Kawara town, Fukuoka Prefecture, in the hope that the industry, administration, and citizenry will be concerned with each other for the realization of an eco-symbiotic community. The fruits of endeavors exerted for this purpose are described in seven chapters, which are (1) the outline of surveys, (2) local characteristics of Kawara town, (3) policy toward introducing new energy, (4) measures for introducing new energy, (5) study of model projects, (6) introduction of new energy into Kawara town, and (7) efforts to realize the introduction. Described in chapter (5) are the introduction of photovoltaic power generation into primary and junior high schools, heat supply business utilizing waste heat from a plant, energy conservation at administration buildings, development of an activities program for people to learn energy related matters, and the results of studies conducted on the respective model projects. Concerning the activities program, several applications are considered, dependent upon who are to implement the program: volunteer students, local community leaders, experts, or administration officials. For the initial stage of learning under the program, a system is built under which experts, local community leaders, primary and junior highschool children, and their teachers cooperate with each other under the leadership of a project coordinator. (NEDO)

  20. Fiscal 1997 survey report. Feasibility study of the environmentally friendly type coal utilization system (survey of the coal utilization in Pakistan); 1997 nendo chosa hokokusho. Kankyo chowagata sekitan riyo system kanosei chosa (Pakistan ni okeru sekitan riyo gaikyo chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper made a literature survey, hearing survey, site survey/study on the coal in Pakistan such as the coal utilization system and the environmental situation, etc., and aimed at pre-examination for the survey of the introduction of the environmentally friendly type coal utilization system to be planned in Pakistan in the future. The examination, data collection and preparation were conducted in terms of the following items: the structure of coal consumption in energy supply, structure of coal consumption, mainly of domestic brown coal consumption, the situation of coal utilization by industry and by region, environmental problems caused by coal utilization such as air pollution, the trend of policies of environmental regulation, etc. The literature on the following was obtained and surveyed: the situation of economy/energy in Pakistan, coal utilization technology by industrial field, and environmental protection technology. The hearing survey was made to institutions concerned, corporation groups and men of learning and experience. Site surveys were conducted for the typically selected coal utilization equipment and existing environmental protection equipment. 66 figs., 56 tabs.

  1. Achievement report for fiscal 1999 on research and development of environment compatible next generation supersonic propulsion system; 1999 nendo kankyo tekigogata jisedai choonsoku suishin system no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-09-01

    This paper describes the achievements in fiscal 1999 in development of an environment compatible next generation supersonic propulsion system. In order to reduce NOx emission, AI combustion control was discussed to have fabricated the backfire and autoignition detection device. The SiC photodiode was selected for flame detection, and a heat and pressure resistant fiberoptic probe was fabricated to detect flames in a high-temperature high-pressure combustor casing. These devices were combined to fabricate the backfire and autoignition detecting device, and the verification test was performed. For the purpose of application to an innovative heat resistant combustor liner, a silicon carbide material reinforced with silicon carbide fibers was selected. For continuous ceramic fiber as a reinforcing material, the Si-Zr-C-O system was selected, and the chemical gas-phase impregnation process effective to enhance the fiber/matrix interface characteristics as the matrix forming method was used together with the inexpensive precursor polymer impregnating and sintering process. Investigations were performed on the advanced control functions to reduce fuel consumption as the development of CO2 emission suppressing technology, and on the trends in discrete control. In addition, the optimal engine control logic and the specifications for discrete system constituting devices to be evaluated as the prototype in the future were established. (NEDO)

  2. Survey report of FY 1997 on the feasibility of microbial biotechnology for reuse of environmental pollutants; 1997 nendo chosa hokokusho (kankyo osen busshitsu no shigenka no tame no biseibutsu bio technology no riyo kanosei chi kansuru chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    An investigation was conducted with the aim of elucidating the foundations for effective utilization of environmental pollutants or unused resources which are likely to be causal substances of environmental pollutants, as resources, using biotechnology. Composting of agricultural waste, production of microbial mycelium proteins and microbial fermentation materials were suggested as main examples of effective utilization of unused resources by microorganisms. Selection of active microorganisms in the livestock waste, clarification of the mechanism of action and the establishment of treatment conditions are essential to new developments in this field. In the field of marine products industry, it was pointed out that the recycling of waste using microorganisms and enzyme treatment is the most promising approach to the effective utilization of resources. In the field of food industry, applications as the culture media for mushrooms, for enzyme production and for the production of physiologically active materials as well as fuel were clarified. Was also pointed out the significance of studies on the microorganisms and enzymes in resources containing cellulose, hemicellulose and lignin, and the waste from these resources, lignocellulose. Were also proposed the composting of household waste, methane fermentation, and fermentative production of organic acid and hydrogen from waste. Possibility and significance of fermentative production of organic acid from sewage sludge were suggested. 314 refs., 46 figs., 33 tabs.

  3. Survey on the present situation and future outlook of energy/environment issues mainly on coal in the APEC region; APEC ikinai no sekitan wo chushin to suru energy kankyo mondai no genjo oyobi kongo no mitoshi ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    For the purpose of studying the energy supply/demand trend and the environmental problem relating mainly to coal in the APEC region, the paper surveyed the situation from the past to the present and outlooked the beginning of the 21st century. GDP in the whole APEC region increased at an annual rate of 3.4% from 1971 to 1991 and made a rapid growth of an annual rate over 7% especially in the non-OECD region. The supply/demand balance of coal, etc. in the non-OECD region is expected to be tight, and the energy price also to be higher. This will be a major factor causing hindrance to the economic growth of resource-importing countries. It is necessary to prepare the energy infrastructure. With the increasing coal utilization, it is feared that pollutants such as SOx, NOx and CO2 will increase, and it is necessary to introduce energy utilization technology/facilities which are high-efficient and environment-friendly and to expedite introduction of non-fossil energy. The APEC region, where the worldwide growth is expected, is a priming for the world development, and a policy which is well balanced in economic growth, stabilized energy supply, and environmental protection is needed for the region to achieve its sustainable growth. 50 figs., 24 tabs.

  4. Modeling of atmospheric corrosion environments and its application to constant dew-point corrosion test; Yagai taiki fushoku kankyo no modeling to sore ni motozuku teirotengata saikuru fushoku shikenho no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Muto, I. [Nippon Steel Corp., Tokyo (Japan)] Sugimoto, K. [Tohoku Univ., Sendai (Japan)

    1998-08-15

    Recently, stainless steel is increasing its demand for corrosion resistant building materials. Then, as it is necessary to develop and accelerating testing method capable of accurately estimating weatherability at sea side area, such testing method has no been developed yet because of difficulty to quantify corrosive environment relating to atmospheric corrosion phenomenon. As air temperature and relative humidity in outdoor change in complex, specific temperature and relative humidity cannot be used for their representative values. And, construction of corrosive factors such as sea salt particles, and so on are also much different at each area. However, at coastal area, a dew water dissolving the sea salt particles, so called droplets of chlorides aqueous solution is formed onto material surface. Then, in this study, on a base of drying and humidity absorption behavior and daily change behavior of temperature and humidity in outdoor, modeling of atmospheric corrosion environment was tried. An accelerating testing method according to this modeling was developed, long-term weathering test was compared with the corrosion behavior of the same steel, and validity of a new accelerating testing method was evaluated. 22 refs., 12 figs., 2 tabs.

  5. FY 1997 report on the study on creation of inorganic materials under micro-gravity environment; 1997 nendo chosa hokokusho (bisho juryoku kankyo riyo muki zairyo no sosei kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Study was made on creation of new functional inorganic materials under micro-gravity condition in an underground non-gravity experiment center to develop new production techniques of inorganic crystalline thin film, fine glass particle, anharmonic alloy, spherical semiconductor and surface modified semiconductor thin film. The micro-gravity observation result was analyzed numerically of interference fringes of Cu ion around an electrode during electrolysis. Experimental data relatively well agreed with computer simulation data. Prototype CdTe thin film was prepared by electrolysis. The size control condition of fine true spherical glass particles was clarified by micro-gravity evaporation/condensation of glass. Pb-Zn system alloys as an anharmonic alloy were prepared under micro-gravity condition, however, no compound of Pb and Zn was found. A production equipment of true spherical single-crystalline semiconductor by melting cubic Ge under micro-gravity condition, and basic data of heating condition were obtained. Surface modified semiconductor thin film was also obtained by micro-gravity laser annealing of SiGe prepared by plasma CVD. 23 refs., 65 figs., 6 tabs.

  6. Report on the finally obtained results of the study of the basement technology for environmentally friendly type metal base material regenerative utilization; Kankyo chowagata kinzokukei sozai kaisei riyo kiban gijutsu no kenkyu saishu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    For the purpose of contributing to the resource recycling and global environmental preservation, the R and D of metal base scrap regenerative utilization technology were conducted, and the report on the finally obtained results was summed up. As to the technology to remove impurities by the solid phase treatment, the Cu removal rate of more than 96% was made possible by the low temperature fracturing technology, and that of more than 90% by the hue difference discrimination separation system technology. From the results of the FS on the low temperature fracturing technology applied to car scraps, it was found out that the present price condition is not economically efficient in the present price condition, but a possibility of achieving the removal rate of 54% in the initial plan was obtained if applying the hue difference discrimination separation system to the pretreatment. Concerning the Sn removal, the Sn removal rate of more than 70% was obtained by the gaseous phase sulfuration method, and that of more than 50% was obtained in Sn removal/Cu removal/Zn removal by the oxidation reaction method. The targets were achieved. Relating to the treatment of impurities by melting (liquid phase), the Cu removal/Sn removal technology under reduced pressure was effective in vacuum melting furnace of 2-ton scale, but the needs for the development of large capacity plasma torch were recognized in that of 40-ton scale for practical use. (NEDO)

  7. Achievement report for fiscal 2000 on research and development of environment compatible next generation supersonic propulsion system; 2000 nendo kankyo tekigogata jisedai choonsoku suishin system no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    This paper describes the achievements in fiscal 2000 in development of an environment compatible next generation supersonic propulsion system. In order to reduce NOx emission, the AI combustion control technology was used to newly fabricate a pre-mixing and pre-evaporating tube model, whereas the backfire and autoignition detection device which has been fabricated on a trial basis was given a verification test in a high temperature and pressure site, whose condition is close to that in the actual combustor. A spectroscopic analyzer was used to sense flame light emission, and the operation was verified by using a model combustor. The basic discussion was given on a combustion control logic, whereas NOx reduction control was verified by using simulations. An Si-Zr-C-/Sic based CMC to be applied to an innovative heat resistant combustor liner was tested to have extracted items to be improved. In the CO2 emission suppression technology, logic design was made on a discrete control system, an engine performance optimization logic was developed, and its functions were verified. Detailed design was completed on a smart sensor to be tested in the HTCE engine operation. As the discussions on the engine system, verifications were given on the calculation of performance cycles during flight, estimation on NOx emission, the basic construction of the fan applied with metallic base composite materials, and the reasonability in the target of weight reduction. (NEDO)

  8. 1998 research cooperation project. Research cooperation on environment-compatible type water resource effective-utilization system; 1998 nendo kankyo taiogata mizushigen yuko riyo system ni kansuru kenkyu kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For the purpose of securing water stably and preventing water pollution in the Philippines, R and D were carried out on a wastewater treatment and water reclamation and reuse system which is easy to operate and maintain and low in cost through the research cooperation between the Philippine Industrial Technology Development Institute and Japan. According to the survey result of statistical data concerning water pollution load structure by industrial wastewater classified by the industry in the Philippines, enumerated are the food manufacturing industry, paper pulp manufacturing industry, and the textile dyeing industry as those greatly affecting water pollution in BOD exhaust and wastewater, etc. Consequently, with Ram Food Product Co. of vegetable processing and Solid Mill Co., of textile dyeing as plants to be studied, a wastewater treatment test was performed in a laboratory scale. From the result of the test, the pilot plant was basically designed to have 'anaerobic + aerobic treatment + tertiary treatment' for the treatment process, with an one-tank type UASB method used as the anaerobic treatment, with a sand filtration + activated charcoal treatment as the tertiary treatment, and with the cost effectiveness for water reuse set to be examined. (NEDO)

  9. FY 2000 report on the investigation of environmental effects in the geothermal development promotion survey. Tertiary. No.B-7 Kuwanosawa area; 2000 nendo chinetsu kaihatsu sokushin chosa. Kankyo eikyo chosa hokokusho - No. B-7 Kuwanosawa chiiki (Dai 3 ji)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-01-01

    In the Kuwanosawa area, Yuzawa city, Akita prefecture, survey was conducted to grasp effects of drilling for structural boring in the geothermal survey on the peripheral environment. In the survey of animals, there were 5 orders/10 families/19 species of mammals and 10 orders/25 families/73 species of birds. Three kinds of precious animals were confirmed. There were 132 families/6,670 species in the flora. Three kinds of precious plants and three kinds of precious floras were confirmed. During the survey, drilling for structural boring was conducted. At three spas for survey, there were recognized some survey items of which there were great fluctuations. However, those are seasonal valuations or valuations related to the situation of the inside of hot springs. It is not recognized that the fluctuations were caused by the drilling work and pumping-up of geothermal water. The noise made during the well drilling was reduced around the well as theoretical values indicated. At a spot 200m away from the well, the noise was reduced from the environmental standard, and accordingly, it seems that there are few effects on the peripheral environment. The vibration was reduced around the well more than theoretical values indicated. That was below the control level at a spot 25m away from the well, and it seems that there are few effects on the peripheral environment. (NEDO)

  10. Fiscal 1999 international cooperation project report. R and D on convection control technology of glass melts by microgravity experiment; 1999 nendo bisho juryoku kankyo wo riyoshita glass yuekinai tairyu seigyo gijutsu no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This R and D aims at development of convection simulation technology of glass melts based on measurement of accurate glass melt properties, and development of convection control technology of glass melts through the model experiment and small tank furnace experiment. Experiment was made on measurement of surface tension while levitating glass melts under the microgravity condition obtained by the drop tower of Japan Microgravity Center in Hokkaido. The shape of glass melt changes into a real sphere under the microgravity condition, and surface tension can be obtained by measuring its frequency, however, such frequency of glass could not be measured in this experiment. Levitation, fusion and oscillation experiment of glass was carried out by using an aero-acoustic levitator of CRT at Chicago. The experiment result is now in analysis. This study also aims the analysis in consideration of a surface tension flow effect. The calculation result showed generation of surface tension flow due to temperature gradient on a liquid surface. Various information were obtained through the model experiment using silicon oil, and glass convention observation by using a small tank furnace. (NEDO)

  11. FY 1998 geothermal development promotion survey. Report on the environmental effect survey (No. A-4 Kunbetsu-dake area); 1998 nendo chinetsu kaihatsu sokushin chosa. Kankyo eikyo chosa hokokusho (No.A-4 Kunbetsudake chiiki)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-09-30

    Of the FY 1998 geothermal development promotion survey, the primary environmental effect survey in the Kunbetsu-dake area was conducted, and the results were arranged. In the well drilling survey, etc., the survey was made aiming at extracting areas to be preserved from an environmental aspect. The results of the survey were summarized as follows: As to the mammalia, 12 families 46 species were confirmed in the area surveyed and the periphery by literature survey. Out of them, the noticeable species which are considered important from an academic viewpoint are 10 families 19 species. As to the aves, 55 families 340 species were confirmed, of which 29 families 79 species are noticeable species. About the amphibia/reptilia, 3 families 3 species in the amphibia and 4 families 6 species in the reptilia were confirmed by literature and hearing survey. The noticeable species is 1 family 1 species in the amphilia. Concerning the terrestrial insecta, 135 families 873 species were confirmed, and the noticeable species is 11 families 20 species. As to the flora, 115 families 1055 species were confirmed, and the noticeable species is 46 families 126 species. Relating to the living vegetation, the one higher than 9 in nature reserves shows a substantial rate, and the periphery of Kaibetsu-dake is designated as the specified flora colony. (NEDO)

  12. Research cooperation project for fiscal 1999. Research cooperation on environment-compatible type water resource effective utilization system; 1999 nendo kankyo taiogata mizushigen yuko riyo system ni kansuru kenkyu kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Efforts are made under this project to develop a wastewater treatment/regeneration system, easy to operate and maintain and low in cost, jointly with a Philippine research institute. Technologies are transferred to this institute concerning research and development, system designing, operation, maintenance, and management. The goal is to disseminate such technologies in the Philippines. As for fiscal 1999 endeavors, emphases are placed on the items described below. The Container Corporation which regenerates waste paper and the RAM Food Corporation which manufactures canned foods and pickles are selected as the sites for pilot plant research. Wastewater discharged by the two corporations is subjected to laboratory-scale wastewater treatment (combination of aerobic/anaerobic treatment and activated carbon adsorption), by which a pilot plant wastewater treatment process is determined and designing conditions are defined. As for activated carbon for advanced wastewater treatment, a fine grain sample, which is the lowest in price among activated coconut shell charcoals produced in the Philippines, is acquired, and tested for performance. A wastewater treatment pilot plant is complete at the Container Corporation, and has started operation. (NEDO)

  13. Survey on acceleration of geothermal development in fiscal 1998. Report on survey for influence on environment (No. B-7, Kuwanosawa district); 1998 nendo chinetsu kaihatsu sokushin chosa.Kankyo eikyo chosa hokokusho (No. B-7 Kuwanosawa chiiki)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-09-01

    A survey was performed on the current situation in the Kuwanosawa district in Akita Prefecture to identify influence on the surrounding environment due to drilling of geothermal structure testing wells. The survey on animals covered mammals of five divisions, 10 families and 19 species, Aves of ten divisions, 25 families and 73 species, reptiles of one division, 3 families and 6 species, Amphibia of two divisions, 6 families, 9 species, and Insects of 17 divisions, 179 families and 719 species. Precious animals of a several species including black salamander were identified. In the plant survey, 132 families and 670 species were identified, with several species listed as the precious plants. In the survey of hot springs, those at three locations were all high-temperature hot springs at as high as 53.8 to 96.9 degrees C. Amount of discharge, pH and electrical conductivity differ largely by the hot springs. The hot spring in Takamatsu did not show large variation throughout the survey period. The Ogura Inn at Doroyu Spa has small variation in pH and hot spring temperature, but large variation in the amount of discharge and Al{sup 3+} concentration. Correlation was recognized between hot spring temperature and amount of discharge, between hot spring temperature and anion, between amount of discharge and electric conductivity, and between amount of discharge and anion. (NEDO)

  14. Characteristic analysis of methane-gas generation by oxidizing heat of stored coal and hold ventilation control; Sekitan unpansen ni okeru sanka hatsunetsu ni yoru methane gas hassei to sonai kankyo seigyo ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Fukuchi, N; Nakashima, T [Kyushu Univ., Fukuoka (Japan); Kudo, S

    1999-12-31

    A demand of coal shows the tendency in the increase worldwide, with this, the marine transportation of the coal gradually increases, and the collier has also enlarged. The traffic pattern of coal is mainly the bulk transportation. In this transportation system, by the oxidation exothermic reaction of the coal, methane gas is produced, simultaneously the coal quality such as coking property or heat quantity is decreased and sometimes spontaneous ignition is caused. Therefore, it is necessary to equip with a ventilator to control the concentration of methane gas and to avoid the self heating of the coal. In this study, the quantity of methane-gas produced by heating coal using an electric furnace was measured and the experiment to investigate the temperature dependency of the methane-gas generated from the coal was conducted. By using the result of the measurement, the quantity of methane-gas produced from the coal stored in the hold of a coal cargo was estimated. And, the mathematical analyses on the changing degree depend on the times of a temperature in the hold under navigation, a concentration of oxygen and a concentration of methane-gas, were conducted. 11 refs., 19 figs., 2 tabs.

  15. Leading survey and research report for fiscal 1999. Survey and research on ozone-aided technology for creating comfortable environment; 1999 nendo ozone riyo kaiteki kankyo sozo gijutsu no chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Efforts are made to grasp the parts remaining technically unsolved of the ozone-aided technology for creating a comfortable environment, such as ozone-aided enhancement of the decomposition of nondegradable organic matters in the urban sewage and industrial wastewater. Efforts are also made to put in order and analyze data about the said technology, to isolate the current problems and the objects of technical deliberation for the future, and to examine the feasibility of the introduction of this technology. Case studies were conducted for a novel ozone-aided system and the effect is examined of the introduction of ozone-aided treatment into crowded towns, water supply systems, sewerage, and industries that handle paper and pulp, chemicals, electric power, and foods. Findings are mentioned below. The ozone utilizing technology when introduced improves the efficiency of water circulation, reduces pollutants at an excellent rate, suppresses the generation of carbon dioxide, and enhances safety of water resources and water environments. To realize such good results, however, it is important for the ozone to be high in concentration, for the accelerated oxidation and enhanced biofunction processes to be further studied, and for the system to be optimized. It is also found that a technology of appropriate ozone storage will help enhance cost reduction. (NEDO)

  16. Research and development achievement report for fiscal 1994 concerning the creation of advanced combustion technologies utilizing the microgravity environment; 1994 nendo bisho juryoku kankyo wo riyoshita kodo nensho gijutsu soshutsu ni kansuru kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    The development committee concluded an agreement about on-site researches with NASA (National Aeronautics and Space Administration) for an international joint study, and the joint study was started at the underground microgravity center. Experiments were conducted at microgravity experimenting facilities and the data obtained were subjected to analysis and evaluation, which eventually contributed to the accumulation of useful data. In this fiscal year, microgravity experimenting facilities were utilized for experiments and tests for (1) the evaluation of the combustion and vaporization of fuel droplets and fuel droplet arrays, (2) analysis and evaluation of high-density fuel combustion characteristics, (3) evaluation of flammability limits, and (4) elucidation of the mechanism of the generation of NOx and the like. A total of 112 drop tests were conducted, and the acquired data were subjected to analysis and evaluation for the elucidation of the combustion mechanism, and findings were collected as mentioned below. Learned were the combustion behavior of fuel droplets such as ignition and flame propagation under item (1), combustion behavior such as ignition and combustion of high-density fuel under item (2), combustion behavior and combustion limits of premixed fuel under (3), and measurement of distribution of combustion products such as OH in the droplet fuel flaming zone under item (4). (NEDO)

  17. Fiscal 1996 survey report on the environmentally friendly type coal utilization system feasibility study. Survey by region/industry in India; Kankyo chowagata sekitan riyo system kanosei chosa. Indo ni okeru sekitan riyo gaikyo chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    A survey was made in India which is a coal producing/consuming country following China in Asia and where coal is used for about 60% of the primary commercial energy. The survey was conducted on coal production/distribution/utilization and environmental issues, aiming at studying feasibility of introducing the environmentally friendly coal utilization system into every industry including the residential/commercial one, and at implementing a comprehensive master plan including Japan`s international cooperation. Total power source facilities in fiscal 1995 are 83.3 million kW, 64% of which are coal thermal power facilities and generated 260 TWh, 69% of the total output energy. Main commercial energy sources are coal, oil and natural gas, and oil is self-sufficient. The survey this time did not examine very well the actual state of the environmental pollution problem caused by the coal utilization. Indian coal is high in ash content but low in sulfur content, and therefore, SOx polluting air has not been a very important problem so far, but soot/smoke is almost the problem. Further, ash treatment after combustion at boilers, etc. is expected to be a big problem in the future. 49 figs., 88 tabs.

  18. USW[center dot]33M-VS wind power turbine winning a 1993 environmental department prize of Discover Magazine. 1993 nendo DISCOVER kankyo bumonsho ni USW/33M-VS furyoku turbine

    Energy Technology Data Exchange (ETDEWEB)

    Ushiyama, M. (Waseda University, Tokyo (Japan))

    1993-12-01

    This paper introduces a variable speed wind power turbine developed jointly by EPRI and US Wind Power Corporation. This wind power turbine has a wind velocity responsive construction in which generated alternating current power has the frequency vary with change in the shaft rotation speed. The specified performance calls for a cut-in of 4 m/s and cut-out of 29 m/s, wind velocity variable. The blades are made of laminated fiberglass, and the rotor has a diameter of 33 m, rotation variable. The tower height is classified to 24 m, 30 m, and 42 m. The blade pitch is controlled by a linear hydraulic cylinder, and the turbine is controlled by a microprocessor. The wind turbine has a system interconnecting control and data collecting system. Two induction three-phase generators are used. EPRI has calculated its power generation cost at 5 cents/kWh if wind blows at an annual average velocity of 16 miles per hour. This is nearly equivalent to the cost at new power plants. US Wind Power Corporation has disassembled 22 experimental models that have been in operation to investigate wear in the machines. Its economy is evaluated comparable with that for fossil fuel technologies. 1 fig.

  19. New energy visions for the Town of Naie district. Human-friendly Town of Naie City by environment-friendly energies; Naiemachi chiiki shin energy vision. Kankyo ni yasashii energy ga tsukuru hito ni yasashii machi Naie

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The new energy visions are drawn for Town of Naie, Sorachi-gun in Hokkaido, where the industrial sector (manufacturing industries) consumes more than 60% of the total energy consumption. By energy type, oil and others account for 80%. When arranged in the order of expected recoverable quantity, the new energies for the town include utilization of solar energy, photovoltaic power generation, wind power generation, and utilization of wastes, biomass energy (agricultural products) and snow energy. The basic guidelines for introduction of new energies are for health and welfare, clearing and utilization of snow, environmental education and bringing up talented persons, supporting the related entrepreneurs, and integration of new energy with promotion of energy-saving movement. The priority projects the town plans to promote include utilization of biogas and temperature-differential energy for the town's water purification center; foundation of the Naie eco-school; and drawing conceptions for utilization of underground heat, utilization of low-temperature and snow/ice energy, co-energy around the spa of Naie, and mega-solar and eco-park at the Sorachi housing complex. (NEDO)

  20. FY 2000 report on research and development of combustion technology utilizing microgravity conditions for fuel diversification; 2000 nendo bisho juryoku kankyo wo riyoshita nenryo tayoka nensho gijutsu no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    This project is aimed at development of optimum combustion technology with diversified fuels, e.g., naphtha and LCO, for gas turbines and others as power sources for topographical energy supply. The combustion under the microgravity is also investigated using the underground facilities at Japan Microgravity Center. Described herein are the FY 2000 results. For construction of combustion model and simulation, the combustion reactions for various liquid fuels are simplified to calculate ignition delay, adiabatic flame temperature and laminar burning velocity with an error less than about 3%. The microgravity combustion experiments are conducted for spray dispersed into a cylinder, to find flame propagation velocities changing with the vaporization characteristics of liquid fuels, and also to construct the combustion models. The premixed turbulent combustion simulation program is developed using a probability density function and analyzed. Development of new combustion technologies includes the study themes of flame propagation and combustion of the air mixture of the multi-component fuel in which the spray exists, combustion characteristics of the droplets of diversified fuels, and combustion of gas turbines with diversified fuels. A propane/air mixture shows different flame propagation characteristics whether it contains kerosene or LCO droplets. The effects of electrical field intensity in the combustion zone on combustion of fuel droplets are elucidated. (NEDO)

  1. Research report for fiscal 1998. Survey on the researchers and research institutes for the effects of global warming and its countermeasures; 1998 nendo onshitsu koka gas ni yoru kankyo eikyo nado ni kansuru kenkyusha kenkyu kikan chosa chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Researchers and research institutes across the world (except those in Japan), engaged in the study of global warming and measures to deal with the phenomenon, are extracted in compliance with certain specified standards, and the latest information on them is appropriately arranged and listed. It is further developed into an electronic database for the convenience of users. The collected information includes more than 230 research institutes and more than 1,000 researchers. The endeavor is exerted by extracting essays and institutes mainly out of the on-line databases. More than 1,000 essays and 130 institutes are covered. Visits are made to five institutes in the U.S. and four in Europe who are most actively engaged in the study of global warming, and detailed researches are conducted and information is exchanged. The Argonne National Institute copes with all energy problems related to global warming. Descriptions are given about environmental impact surveys and CO2 isolation in the ocean at the Center for Global Science of the Massachusetts Institute of Technology. At the Oak Ridge National Laboratory, the visitors heard explanations of technologies related to renewable energies and so forth. Researches are made into ecosystems at the University of California, and into natural energies at the University of Hawaii. Also visited are research institutes in Australia, Germany, Netherlands, and Britain. (NEDO)

  2. Fiscal 1998 research report. R and D on advanced combustion technology under microgravity environment; 1998 nendo seika hokokusho. Bisho juryoku kankyo wo riyoshita kodo nensho gijutsu soshutsu ni kansuru kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Research was made on explication of a combustion phenomenon by using a microgravity facility, and a combustor possible to realize advanced combustion technology. In the basic research composed of 5 themes by the international joint research with NASA, 52 drop experiments using JAMIC's facility and 100 drop experiments using NASA's 2.2s drop tower were carried out. The themes are composed of an interaction in droplet arrays combustion, combustion of binary fuel sprays, combustion characteristics of solid fuel, flame dynamics around a lean flammability limit, and mass transfer around a combustion field. In the experiment using the microgravity experiment facility and analysis evaluation of the experimental data, studies were made on combustion and evaporation of fuel droplets, combustion characteristics of dense fuel, flammability limit, formation mechanism of NO{sub x} and an advanced combustor. For applying a pre-evaporating/pre- mixing combustion system to a combustor for aircraft engines, studies were made on some issues such as improvement of a combustion stability, NO{sub x} discharge characteristics, and optimum fuel atomizing. (NEDO)

  3. FY 1995 report on the cooperative research on the development of environmentally friendly high efficiency mineral resource extraction/treatment technology; 1995 nendo kankyo chowagata kokoritsu kobutsu shigen chushutsu shori gijutsu no kaihatsu ni kansuru kenkyu kyoryoku hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This promotion project on the cooperative research aims to efficiently extract and recover valuable metals (gold, silver, copper, rare metal, etc.) including in large quantity in tailings of ores in the Republic of Kazakhstan. In FY 1995, conducted were the field survey, support study in Japan, acceptance of researchers from Kazakhstan, conceptual design of pilot plant, etc. The ore/mineral for Cu is mainly an alteration ore of chalcopyrite. Au and Ag are low grade and unknown, and the main gangue mineral is pyrite. The low grade ore (waste/much) of the Nikolayevska mine has a tendency to leaching at normal temperature, but the ore of mostly chalcopyrite such as tailings from each place has difficulty in leaching. It gets leaching by increasing temperature. The more the temperature rises, the more conspicuous the reaction becomes. Further, chalcopyrite is leached with priority over pyrite. From the result, a technical potentiality was obtained of leaching of low grade chalcopyrite in tailings mostly of pyrite. The existence of Thiobacillus ferrooxidans was confirmed. As to the recovery method for Au and Ag, CIC is studied. The process of waste/much is solvent extraction, electrowinning study and leaching, and that of tailings is bacteria leaching and leaching study. (NEDO)

  4. NEDO Forum 2001. Session on development of energy and environmental technologies (For promotion of comprehensive development of hydrocarbon-based energy); NEDO Forum 2001. Energy kankyo gijutsu kaihatsu session (tanka suisokei energy no sogo kaihatsu suishin no tame ni)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-09-20

    The presentations made at the above-named session of the NEDO (New Energy and Industrial Technology Development Organization) forum held in Tokyo on September 20, 2001, are collected in this report. Pointed out in a lecture entitled 'How technology development for hydrocarbon-based energy resources should be' was the need of technologies for clean energy production; CO2 emission reduction; NOx, SOx, soot, and dust reduction; and the expansion of exploitation of resources now left unused. Reported in a lecture entitled 'Cooperation with China on coal liquefaction' were the result of a coal liquefaction demonstration plant feasibility study conducted for coal from Inner Mongolia, and so forth. Reported in a lecture entitled 'Development of coal oil upgrading technology' were the result of the operation of a test plant, and so forth. Reported in a lecture entitled 'Research and development of HyperCoal' were the result of HyperCoal manufacturing technology research and development, designing of a HyperCoal-fired gas turbine power generation system, and so forth. In addition, development of technology for high efficiency conversion of biomass energy and development of technology for refuse gasification/melting power generation were reported. (NEDO)

  5. Fiscal 1994 survey report. Part 2. Study on soil environment remediation system using ecological information and functions; 1994 nendo seitaikei joho to seitaikei kino ni yoru dojo kankyo fukugen system no chosa hokokusho. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    A survey is conducted of the feasibility of soil environment remediation through detecting contamination of soil and changes in ecosystems caused by industrial activities, with attention paid to biological antagonists. In this fiscal year, based on the results of surveys conducted in the past, studies are continued mainly on hypersensitive biosensing technology using ecosystem functions, remote sensing technology to monitor the terrestrial vegetation and soil environment over wide areas, and soil environment remediation technology using biological antagonists and vegetation. In consideration of Europe's long experience in this field, seven organizations known for their accomplishments are visited, where interviews are held. There is a close relationship between soil environments and ecosystems, and ecosystems are provided not only with information on changes in soil environments but also with functions to remedy soil environments by minimizing secondary contamination. To put such information and functions to practical use, element technologies are indispensable, including hypersensitive soil environment biosensors and environmental remediation by identification and isolation of biological information carrying substances and by vegetation. Proposed in this report is a project for soil remediation by use of biological information and functions and for elucidation of biological antagonists. (NEDO)

  6. Investigations in fiscal 1983 on promotion of geothermal development. Part 1. Report on investigation of fumarolic environmental effects in Oku-Aizu area; 1983 nendo chinetsu kaihatsu sokushin chosa. 1. Okuaizu chiiki funkichu kankyo eikyo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1984-03-01

    As part of the investigations on promotion of geothermal development, surveys have been carried out in the Oku-Aizu area to identify the existence and/or extent of effects of collecting geothermal fluids above the ground imposed on the environment, such as the natural ecological system. The investigated area is an area of 60 km{sup 2} covering Kawanuma County and Onuma County in Fukushima Prefecture, a mountainous area with undulations. The investigation result may be summarized as follows: the area shows the inland climate and has snow fall as much as 2 m in winter; according to the H2S diffusion prediction, the concentration thereof on the land in seasonal average is 0.7 ppm at maximum, which is a value presenting no problems. No fumarolic effects of SO2 were identified, and floating dust and Hg showed values that present no problems. With regard to water quality during and after the blowout test, no effects of blowout return were identified. The noise level was 41 to 45 phones at a place 100 m distant, and the vibration level has become the lower detection limit at a place 50 m distant. Leveling has discovered no ground movement. No variation in major constituents in thermal spring water was verified before and after the blowout test. (NEDO)

  7. Fiscal 1995 survey report on the environmentally friendly type coal utilization system introduction support project. Verification project on the circulating fluidized bed boiler; Kankyo chowagata sekitan riyo system donyu shien jigyo. Junkan ryudosho boiler ni kakawaru jissho jigyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-01

    In relation to the circulating fluidized bed boiler which reduces the amount of sulfur oxides emitted in coal utilization, a verification project was carried out on installation of the equipment and spread activity in China and the Philippines contributing to the control of environmental pollutant associated with coal utilization and the effective use of energy. At the Fanshan area, installed was a 10t/h internal circulating fluidized bed boiler. At the performance test, coal includes around 7% of impurities such as stone, and the impurities should be excluded continuously at the time of actual run. Therefore, the boiler efficiency had to be changed from 89.5% to 85.8%. Further, power generation facilities have not yet been finished, and the overall operation of boiler turbine has not been executed. At the Zibo area, a 30t/h external circulating fluidized bed boiler was installed. The boiler efficiency reached 86.1%, over the targeted value. At the Batangas area in the Philippines, a 10t/h internal circulating fluidized bed boiler was installed. The boiler efficiency reached 85.8%, over the designed value. About the coal produced in the Philippines, slagging was feared, but the combustion state was favorable. 82 figs., 21 tabs.

  8. Life cycle assessment of supercharger for automotive use. Small displacement, high charging pressure engine and environmental load; Jidosha tosaiyo supercharger no life cycle assessment (LCA hyoka). Shohaikiryo kokakyu engine no kankyo eno yasashisa

    Energy Technology Data Exchange (ETDEWEB)

    Takabe, S; Sonoya, T; Hara, M [Ishikawajima-Harima Heavy Industries Co. Ltd., Tokyo (Japan)

    1997-10-01

    In resent years environmental conservation requires low fuel consumption and low emission engine. And environmental load of every car life stage (production, using, abolition) is considered. Life Cycle Assessment of supercharging small displacement engine is reported, compared with natural aspirated engine as same maximum torque and maximum power as supercharging engine. 6 refs., 8 figs., 3 tabs.

  9. Report on regional new energy vision for Kawara town. Toward the creation of eco-symbiotic community; Kawaracho chiiki shin energy vision hokokusho. Kankyo kyoseigata shakai no sozo ni mukete

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-02-01

    A regional new energy vision has been formulated for Kawara town, Fukuoka Prefecture, in the hope that the industry, administration, and citizenry will be concerned with each other for the realization of an eco-symbiotic community. The fruits of endeavors exerted for this purpose are described in seven chapters, which are (1) the outline of surveys, (2) local characteristics of Kawara town, (3) policy toward introducing new energy, (4) measures for introducing new energy, (5) study of model projects, (6) introduction of new energy into Kawara town, and (7) efforts to realize the introduction. Described in chapter (5) are the introduction of photovoltaic power generation into primary and junior high schools, heat supply business utilizing waste heat from a plant, energy conservation at administration buildings, and the development of an activities program for people to learn energy related matters. Several applications are considered concerning the activities program, dependent upon who are to implement the program: volunteer students, local community leaders, experts, or administration officials. In relation to heat supply business, studies are conducted about the supply of waste heat from a cement plant to public facilities such as the town hall and administration buildings in the form of medium pressure steam or hot water. (NEDO)

  10. New energy vision for Kunigami village. Building a Village Friendly to the Environment in the 21st Century; Kunigamison shin energy vision. 21 seiki no shizen kankyo ni yasashii mura zukuri

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-02-01

    A new energy vision has been formulated for Kunigami village, Okinawa Prefecture, for dealing with environmental problems and for activating the region through the utilization of new energy. It is a 6,000-strong village located at the northern end of the mainland of the Ryukyus, which consumed 35 GWh of electric power in fiscal 1998. The results of activities in this connection are summarized in seven chapters, which are (1) the current state of Kunigami village, (2) current state of new energy, (3) existing amount of new energy, (4) survey using questionnaires, (5) basic policy toward new energy introduction, (6) new energy vision formulation, and (7) a system for new energy introduction. Chapter (6) is constituted of the formulation of new energy projects and conditions to satisfy for their realization, with the projects covering the introduction of photovoltaic power generation, wind power generation, small scale hydroelectric power generation, and clean energy vehicles and the implementation of popularizing and enlightening activities. Under the project for popularizing and enlightening activities, information will be disseminated, people will receive education about environments, economic support will be provided, and support will be extended to enterprises for their beginning new energy businesses. The economic support to be provided will involve the introduction of the support systems of the Government and the study of the creation of a village operated support system. (NEDO)

  11. FY 1995 result report. Research/development on the creation of high-grade combustion technology using a microgravity environment; 1995 nendo seika hokokusho. Bisho juryoku kankyo wo riyoshita kodo nensho gijutsu soshutsu ni kansuru kenkyu kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This report summarized the results of the research survey carried out by Japan Space Utilization Promotion Center (JSUP) under the contract with NEDO's industrial technology research and development department. This research survey is aimed at creating high-grade combustion technology which can respond to the decrease in environmental pollutant in combustion exhaust gas from viewpoints of energy diversification and global environmental preservation in consideration of the stabilized energy supply. Established inside JSUP is a research/development committee on high-grade combustion technology which is organized by men of learning and experience from universities, national institutes, private companies, etc. Following FY 1994, the following were continuously conducted: (1) joint research with NASA as an international research cooperation; (2) test using microgravity test facilities and analysis/evaluation of the test data. The experiment was conducted using facilities, etc. of the underground gravity-free test center established as a part of the national research base arrangement project. A lot of experimental data were obtained and stored which are useful for elucidation of the combustion mechanism and the development of ground combustor. (NEDO)

  12. International research cooperation in fiscal 1997. Report on the research, development, and evaluation of environmentally-friendly combustion technologies; Kokusai kyoryoku jigyo. Kankyo chowagata nensho gijutsu ni kansuru kenkyu kaihatsu hyoka hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Concerning the research and development of environmentally-friendly combustion technologies that had been conducted for six years beginning in 1992, analysis and discussion were made by a special committee dedicated to the evaluation of the efforts, and the outcome is stated. In the study of zeolite-base catalysts, a highly active catalyst was developed which assumes a multilayer structure of mordenite, etc., with titanium introduced thereinto using an NO-selective reducing catalyst. As for metal complex oxide-base catalysts, various catalysts high in activity were developed, based on saponite which is a laminar, clayey compound. As for alumina-base catalysts, details were learned of the reaction mechanism and catalysis activation sites and, helped by the findings, a silver-supporting alumina catalyst was produced. In the study of direct decomposition type NOx removing catalysts, a success was achieved in causing NO to be decomposed with high selectivity in an oxygen atmosphere by use of new-type electrodes, functional layers, and solid electrolytes. In the field of catalytic combustion, a PdO-Pt/Ba-Al2O3 catalyst was developed, which is to serve for a hybrid type catalytic combustion method. 19 refs., 112 figs., 25 tabs.

  13. Report on survey for environment harmonizing type energy community project for Chubu International Airport. District heat supply facilities using large-scale cogeneration systems; Chubu kokusai kuko kankyo chowagata energy community jigyo chosa hokokusho. Daikibo cogeneration chiiki netsu kyokyu shisetsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The Chubu International Airport is positioned as a hub airport scheduled to start its use in the early part of the 21st century, to which introduction of large-scale cogeneration systems was discussed. Structuring an energy supply system conscious of the 21st century is intended, that is friendly to the environment, is attached with importance on the economy, and has high reliability and safety. The systems have cogeneration capacity from 4,500 to 6,000 kW, and utilize high-pressure waste heat from the cogeneration system as the heat source. The system uses the high pressure waste heat, stored heat, and gas at the same time to achieve high economic performance brought about by heat storage and the best energy source mix, while attempting cascade utilization of the heat. Considerations were given to suppress the environmental and energy load on the district as low as possible for the coexistence with the district, and to build framework and coordination to return the merits to the district. Subsidy introduction also has a great effect to assure the economic performance. The optimal specific construction of the system was found in combining the utilization of energy generated from temperature difference in sea water as a heat source system, the topping system utilizing the high pressure waste heat available in the system, high-efficiency heat pumps, and the heat storing system utilizing electric power available at late night. (NEDO)

  14. New energy vision of the Tagawa city area. Aiming at a town for symbiosis of humans and the environment; 2001 nendo Tagawa shi chiiki shin energy vision. Hito to kankyo ga kyoseisuru machi wo mezashite

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-03-01

    For the purpose of promoting the introduction of new energy and enhancing the awareness of it in Tagawa City, Fukuoka Prefecture, an investigational study was conducted of the energy supply/demand of the city, existence amount of new energy, project for new energy introduction, etc., and a vision was worked out. The energy consumption amount of the city was estimated at 6,678,932 GJ/y. It consisted of 42% in the industrial sector, 35% in the transportation sector and 23% in the commercial/residential sector. The rate of energy source was 75% of petroleum-base energy and 25% of electric power. As the project for new energy introduction, the following were studied: power generation/thermal exchange/composting by fermentation of methane from stockbreeding waste; environmental preservation type agriculture such as large-scale hothouse using exhaust heat from cement plant; utilization of ground mine water at coal goaf for space cooling and as water source; introduction of photovoltaic power generation/solar energy use hot water supply system to public facilities; introduction of clean energy car to vehicle in welfare/education fields; preparation of a program for energy environment education; preparation of bases for energy environment education. (NEDO)

  15. Report for fiscal 1998. Joint research of environment-friendly system for effectively utilizing water resources; 1998 nendo hokokusho. Kankyo taiogata mizushigen yuko riyo system ni kansuru kenkyu kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The research is conducted in cooperation with Industrial Technology Development Institute of the Philippines, and aims to solve water related problems such as unstable water supply and water quality pollution though developing a waste water treatment and recycling system which is easy to operate and maintain, low in cost, and usable in the Philippines. Fiscal 1998 is the second year of the project. Statistics are studied about the load that each industrial branch imposes on water for its pollution, and it is found that food manufacturers, paper pulp mills, and fiber dyeing plants are heavily responsible for water pollution. A method consisting of single-tower UASB anaerobic treatment and activated sludge treatment is applied as a water treatment process to Ram Food Products Corporation, and its optimization is studied. A removal rate 60% is achieved after a 12-hour treatment period at a COD (chemical oxygen demand) rate of 8g/liter/day. A method consisting of coagulating sedimentation and activated sludge treatment is applied to the waste water from a Solid Mill Corporation dyeing plant, when it is found that the water after ultimate treatment is almost colorless and that COD is 76mg/liter and BOD (biological oxygen demand) 13mg/liter, and these suggest that the waste water is recyclable. Since it is low in COD removing rate, the application of anaerobic treatment to high-concentration water after washing is not appropriate. (NEDO)

  16. Next-generation coal utilization technology development study. Environmentally-friendly coal combustion technology; O2/CO2 combustion technology; Sekitan riyo jisedai gijutsu kaihatsu chosa. Kankyo chowagata sekitan nensho gijutsu (sanso nensho gijutsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    For the purpose of developing combustion systems in which environmental pollutants are less emitted from coal-fired boilers, conducted in fiscal 1994 were a study of load followability of oxygen producing equipment, and element and basic tests on oxygen combustion systems. Dynamic simulations were made to confirm load followability of low-purity oxygen producing equipment. Further, a test was made on starting time of oxygen producing equipment. As a result of the simulation, favorable load followability was confirmed except for some of the process. The width of variation of the product oxygen purity was {plus_minus} 0.7% at maximum. In the element test on oxygen combustion systems, an experiment on the oxygen combustion using pulverized coal was conducted to study heat collection characteristics of furnace and response to multi-kind of coal. A study of balance of S content, experiments on characteristics of crushing/transporting pulverized coal, etc. were added. There were seen no peculiar differences in CO2 transport and air transport. 216 figs., 31 tabs.

  17. Report on the achievements in fiscal 1999. Surveys on the foundation for establishing industrial technology strategies (Foundation and environment improving strategies - an overall survey); 1999 nendo sangyo gijutsu senryaku sakutei kiban chosa hokokusho. Kiban kankyo seibi senryaku (zentai chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Surveys were performed on the foundation for technological innovation in Japan and other countries. Main findings obtained from the actual state survey were compiled from the two aspects of 'items having difference in international comparison' and 'main findings by nucleuses and functions'. In order to activate the economy stagnated in the 1980's, America has developed strong industrial technology policies under the initiative of the government to strengthen the competitive edge, and the result thereof appears linking with the briskness in the today's U.S. economy. In Japan, the non-competitive fund distributed uniformly to national universities and national research institutes accounts for the majority in the governmental research fund. In contrast, many of the research funds of the U.S. government are the competitive fund, whereas researchers perform their research works using these funds, including their own labor cost, and the competition is intense. America is regarded to have put a huge amount of national defense research expense and space development research expense into private business entities, which are playing a large role in developing advanced technologies. A great amount of governmental fund is injected concentratedly into researches of health, medical and bio-technologies. (NEDO)

  18. FY1998 Report of surveys on network possibility involved with proliferation and transfer of environmental technologies (Europe, Australia and New Zealand); 1998 nendo kankyo gijutsu no fukyu iten ni kakawaru network kanosei chosa hokokusho . Oshu Goshu New Zealand

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    At the third Conference of the Parties to the United Nations Framework Convention for Climate Change (COP3) held in December 1997, the industrialized nations have agreed on development and proliferation of innovative technologies under international cooperation and transfer of environmental technologies to developing countries by expanding and strengthening CTI being the framework to be progressed spontaneously. Under the international strategic research project for global environment, NEDO has been promoting positively the research and development, whose support is urged to be expanded further in the future upon receiving the present agreement. Therefore, NEDO has performed the present survey in order to propose frameworks and measures for strengthening and expanding CTI. From among the policies and measures to be taken by the related countries based on the COP3 protocol, fiscal 1997 has performed review and new establishment of plans involved with execution of the items related to technology development, and surveys on action movements such as review and expansion of the measures, as the first stage. Fiscal 1998 has executed surveys focusing on the network for technology proliferation and transfer to developing countries as the second stage. (NEDO)

  19. Fiscal 1996 international research cooperation project. Report on the R and D result of the environmental harmony type combustion technology; 1996 nendo kokusai kenkyu kyoryoku jigyo. Kankyo chowagata nensho gijutsu ni kansuru kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The research was conducted jointly with Europe of a catalyst which enables clean combustion and NOx removal in polluted gas in combustion flue gas, etc. Reformation of mordenite and {beta}-zeolite was done by ion exchange, ion implantation, and membrane formation. A catalyst was searched for to obtain reducing agents, C5-C8 components, by decomposing light oil. Saponite, clay compound, showed by copper and silver ion exchanges approximately 50% of activity under 20,000h{sup -1}, C3H6 reducing agent, and without steam. The effect of the temperature of sintering on NOx selective reductionality of silver-carrying alumina catalyst was studied, and in sintering at 800degC, activity increased. When using conductive oxides like ruthenium oxide for electrolyte, NO decomposition selectivity increased. As to the functional layer carried above the Pd electrolyte, iron oxide and magnesium oxide increased NO decomposition selectivity. PdO and rare earth oxides forming compounds controlled variation of activity by dissociation/reoxidation of PdO. As to PdO/Gd203, the initial methane combustion activity was favorable, but there was seen deterioration with age. 271 refs., 281 figs., 58 tabs.

  20. Report on the achievements in fiscal 1999. Surveys on the foundation for establishing industrial technology strategies (Foundation and environment improving strategies - an overall survey); 1999 nendo sangyo gijutsu senryaku sakutei kiban chosa hokokusho. Kiban kankyo seibi senryaku (zentai chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Surveys were performed on the foundation for technological innovation in Japan and other countries. Main findings obtained from the actual state survey were compiled from the two aspects of 'items having difference in international comparison' and 'main findings by nucleuses and functions'. In order to activate the economy stagnated in the 1980's, America has developed strong industrial technology policies under the initiative of the government to strengthen the competitive edge, and the result thereof appears linking with the briskness in the today's U.S. economy. In Japan, the non-competitive fund distributed uniformly to national universities and national research institutes accounts for the majority in the governmental research fund. In contrast, many of the research funds of the U.S. government are the competitive fund, whereas researchers perform their research works using these funds, including their own labor cost, and the competition is intense. America is regarded to have put a huge amount of national defense research expense and space development research expense into private business entities, which are playing a large role in developing advanced technologies. A great amount of governmental fund is injected concentratedly into researches of health, medical and bio-technologies. (NEDO)

  1. Catalytic technology in the energy/environment field. Utilization of catalyst in coal pyrolysis and gasification processes; Energy kankyo bun`ya ni okeru shokubai gijutsu. Sekitan no netsubunkai oyobi gas ka ni okeru shokubai no riyo

    Energy Technology Data Exchange (ETDEWEB)

    Otsuka, Y. [Tohoku University, Institute for Chemical Reaction Science (Japan)

    1998-05-20

    This review article focuses on the utilization of several catalysts during coal pyrolysis and gasification. In situ or off line catalytic upgrading of volatile matters during pyrolysis of low rank coals is carried out in pressurized H2 with different reactors to produce BTX (benzene, toluene and xylene). When NiSO4 and Ni(OH)2 are used in the hydropyrolysis of Australian brown coal using an entrained bed reactor with two separated reaction zones, BTX yield reaches 18-23%. MS-13X zeolite and USY zeolite mixed with Al2O3 are effective for producing BTX with powder-particle fluidized bed and two-stage reactors, respectively. Catalytic gasification is described from a standpoint of direct production of SNG(CH4) from coal and steam. When K2CO3 and Ni are compared for this purpose, Ni catalyst is more suitable at low temperatures of 500-600degC, where CH4 formation is thermodynamically favorable. Fe and Ca catalysts can successfully be prepared from inexpensive raw materials and are rather active for steam gasification at {>=}700degC. The use of upgrading and gasification catalysts is discussed in terms of preparation, performance, life and recovery. 27 refs., 6 figs., 2 tabs.

  2. Fiscal 1995 international research cooperation project. Report on the R and D result of the environmental harmony type combustion technology; 1995 nendo kokusai kenkyu kyoryoku jigyo. Kankyo chowagata nensho gijutsu ni kansuru kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The research and development were conducted jointly with Europe of an environmental harmony type high efficient catalyst which enables clean combustion and NOx removal in polluted gas in combustion flue gas, etc. In the research and development of NOx removal catalyst such as zeolite base, reformation of mostly mordenite was done by ion exchange, ion implantation, skeleton element substitution, etc. A possibility was found out of applying the membrane formation method except ion implantation as reforming means. In the R and D of the complex oxide base NOx removal catalyst, it was found that the catalyst carrying copper and silver on silica and layer clay compound under optimum conditions shows peculiarly high activity, and there is little decrease in the activity, but rather increase in it even under vapor existence. An evaluation was made of NO resolution of direct resolution element carrying noble metal electrolyte on solid electrolyte, finding out that the highest NO selectivity is shown with Pd as electrolyte and at a baking temperature of about 1300degC. Development of high- and low-temperature catalysts was also made. 417 refs., 286 figs., 63 tabs.

  3. FY 1999 report on the results of the R and D of the environmentally friendly type production technology - high functional chemical synthesis bioreactor; 1999 nendo kankyo chowagata seisan gijutsu (kokino kagaku gosei bioreactor) kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The R and D were carried out of 'high functional chemical synthesis bioreactor' which makes use of the reaction mechanism of the living organism composed under normal temperature/normal pressure, and the FY 1999 results were summed up. In the development of the element technology to control appearance of bacteria and animal cells, a reactor assessment system to produce the combined transferrin was constructed using the recombined cells which were bred by introducing the integrated vector. By this assessment system, the target value of material productivity was achieved. As to the multiple stage enzyme reaction control breeding technology, the colon bacillus into which 6 kinds of genes in relation to the reaction from hydroxypyruvaldehyde dehydrogenase to cysteine were integrated was incubated, and the appearance of all the enzymes was achieved. In the technology development of a bioreactor system, the production of 1 unit/mg protein of enzyme in 24 hours was achieved using the continuous two step incubation system. Further, to assess the material productivity of the recombined colibacillus, study of conditions of cysteine production was made using the fixed fungus body, and cysteine productivity of 11.3g/l was successfully achieved. (NEDO)

  4. FY 2000 report on development of the infrastructure to promote use of fuel cells for automobiles. For safety and environmental factors; 2000 nendo jidoshayo nenryo denchi no fukyu kiban seibi seika hokokusho. Anzensei shuhen kankyo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Described herein are the results of the FY 2000 activities for safety and environmental factors involved in fuel cell powdered vehicles. The current technical standards and specifications for CNG and LPG fueled vehicles are investigated, to extract the factors necessary to establish the safety evaluation guidelines when these fuels are replaced by hydrogen fuel. The rules extracted and studied include those related to collision and resultant fuel leakage, removal of spark and hot sources, leakage in the fuel system, leakage into containers and passenger rooms, and materials. For the rules on test methods of fuel tanks, the investigated items include fire resistance, impact resistance and permeation loss of fuel from the tanks. For system safety, the investigated items include possible unusual situations, leakage of the electrolytes and electrical shock. The basic data are collected for destruction of the fuel tanks, spout of hydrogen from and electrification of the hydrogen-occluding alloys, flame retardancy of high-voltage wires for automobiles, and hydrogen diffusion simulation. The safety-related technical trends are followed by hearing the related organizations, including automakers. Literature survey and hearing are conducted to investigate the environmental effects of radio wave interference and noise. (NEDO)

  5. Reduction of energy essential to human life by 70%. Environment-friendly residence `ED-1` utilizing the sunlight effectively; Seikatsu ni hitsuyona energy no 70% sakugen. Taiyoko riyo no kankyo kyosei jutaku ED-1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-09-01

    This paper presents the environment-friendly residence `ED-1` utilizing the sunlight effectively. ED-1 of 97m{sup 2} in first floor area and 81m{sup 2} in second one has, on its roof, the photovoltaic power generation system, the solar hot water collector which supplies hot water by circulating heated antifreezing solution into a hot storage tank, and the solar hot wind collector which largely contributes to energy saving together with a hot room named an S unit on the first floor.