WorldWideScience

Sample records for chemistry techniques applied

  1. Nuclear analytical techniques applied to forensic chemistry

    International Nuclear Information System (INIS)

    Gun shot residues produced by firing guns are mainly composed by visible particles. The individual characterization of these particles allows distinguishing those ones containing heavy metals, from gun shot residues, from those having a different origin or history. In this work, the results obtained from the study of gun shot residues particles collected from hands are presented. The aim of the analysis is to establish whether a person has shot a firing gun has been in contact with one after the shot has been produced. As reference samples, particles collected hands of persons affected to different activities were studied to make comparisons. The complete study was based on the application of nuclear analytical techniques such as Scanning Electron Microscopy, Energy Dispersive X Ray Electron Probe Microanalysis and Graphite Furnace Atomic Absorption Spectrometry. The essays allow to be completed within time compatible with the forensic requirements. (author)

  2. Modern Chemistry Techniques Applied to Metal Behavior and Chelation in Medical and Environmental Systems ? Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Sutton, M; Andresen, B; Burastero, S R; Chiarappa-Zucca, M L; Chinn, S C; Coronado, P R; Gash, A E; Perkins, J; Sawvel, A M; Szechenyi, S C

    2005-02-03

    This report details the research and findings generated over the course of a 3-year research project funded by Lawrence Livermore National Laboratory (LLNL) Laboratory Directed Research and Development (LDRD). Originally tasked with studying beryllium chemistry and chelation for the treatment of Chronic Beryllium Disease and environmental remediation of beryllium-contaminated environments, this work has yielded results in beryllium and uranium solubility and speciation associated with toxicology; specific and effective chelation agents for beryllium, capable of lowering beryllium tissue burden and increasing urinary excretion in mice, and dissolution of beryllium contamination at LLNL Site 300; {sup 9}Be NMR studies previously unstudied at LLNL; secondary ionization mass spec (SIMS) imaging of beryllium in spleen and lung tissue; beryllium interactions with aerogel/GAC material for environmental cleanup. The results show that chelator development using modern chemical techniques such as chemical thermodynamic modeling, was successful in identifying and utilizing tried and tested beryllium chelators for use in medical and environmental scenarios. Additionally, a study of uranium speciation in simulated biological fluids identified uranium species present in urine, gastric juice, pancreatic fluid, airway surface fluid, simulated lung fluid, bile, saliva, plasma, interstitial fluid and intracellular fluid.

  3. Nuclear analytical techniques applied to forensic chemistry; Aplicacion de tecnicas analiticas nucleares en quimica forense

    Energy Technology Data Exchange (ETDEWEB)

    Nicolau, Veronica; Montoro, Silvia [Universidad Nacional del Litoral, Santa Fe (Argentina). Facultad de Ingenieria Quimica. Dept. de Quimica Analitica; Pratta, Nora; Giandomenico, Angel Di [Consejo Nacional de Investigaciones Cientificas y Tecnicas, Santa Fe (Argentina). Centro Regional de Investigaciones y Desarrollo de Santa Fe

    1999-11-01

    Gun shot residues produced by firing guns are mainly composed by visible particles. The individual characterization of these particles allows distinguishing those ones containing heavy metals, from gun shot residues, from those having a different origin or history. In this work, the results obtained from the study of gun shot residues particles collected from hands are presented. The aim of the analysis is to establish whether a person has shot a firing gun has been in contact with one after the shot has been produced. As reference samples, particles collected hands of persons affected to different activities were studied to make comparisons. The complete study was based on the application of nuclear analytical techniques such as Scanning Electron Microscopy, Energy Dispersive X Ray Electron Probe Microanalysis and Graphite Furnace Atomic Absorption Spectrometry. The essays allow to be completed within time compatible with the forensic requirements. (author) 5 refs., 3 figs., 1 tab.; e-mail: csedax e adigian at arcride.edu.ar

  4. Applying contemporary statistical techniques

    CERN Document Server

    Wilcox, Rand R

    2003-01-01

    Applying Contemporary Statistical Techniques explains why traditional statistical methods are often inadequate or outdated when applied to modern problems. Wilcox demonstrates how new and more powerful techniques address these problems far more effectively, making these modern robust methods understandable, practical, and easily accessible.* Assumes no previous training in statistics * Explains how and why modern statistical methods provide more accurate results than conventional methods* Covers the latest developments on multiple comparisons * Includes recent advanc

  5. Applied ALARA techniques

    Energy Technology Data Exchange (ETDEWEB)

    Waggoner, L.O.

    1998-02-05

    The presentation focuses on some of the time-proven and new technologies being used to accomplish radiological work. These techniques can be applied at nuclear facilities to reduce radiation doses and protect the environment. The last reactor plants and processing facilities were shutdown and Hanford was given a new mission to put the facilities in a safe condition, decontaminate, and prepare them for decommissioning. The skills that were necessary to operate these facilities were different than the skills needed today to clean up Hanford. Workers were not familiar with many of the tools, equipment, and materials needed to accomplish:the new mission, which includes clean up of contaminated areas in and around all the facilities, recovery of reactor fuel from spent fuel pools, and the removal of millions of gallons of highly radioactive waste from 177 underground tanks. In addition, this work has to be done with a reduced number of workers and a smaller budget. At Hanford, facilities contain a myriad of radioactive isotopes that are 2048 located inside plant systems, underground tanks, and the soil. As cleanup work at Hanford began, it became obvious early that in order to get workers to apply ALARA and use hew tools and equipment to accomplish the radiological work it was necessary to plan the work in advance and get radiological control and/or ALARA committee personnel involved early in the planning process. Emphasis was placed on applying,ALARA techniques to reduce dose, limit contamination spread and minimize the amount of radioactive waste generated. Progress on the cleanup has,b6en steady and Hanford workers have learned to use different types of engineered controls and ALARA techniques to perform radiological work. The purpose of this presentation is to share the lessons learned on how Hanford is accomplishing radiological work.

  6. Teaching Techniques in Clinical Chemistry.

    Science.gov (United States)

    Wilson, Diane

    This master's thesis presents several instructional methods and techniques developed for each of eleven topics or subject areas in clinical chemistry: carbohydrate metabolism, lipid metabolism, diagnostic enzymology, endocrinology, toxicology, quality control, electrolytes, acid base balance, hepatic function, nonprotein nitrogenous compounds, and…

  7. Nuclear techniques in analytical chemistry

    CERN Document Server

    Moses, Alfred J; Gordon, L

    1964-01-01

    Nuclear Techniques in Analytical Chemistry discusses highly sensitive nuclear techniques that determine the micro- and macro-amounts or trace elements of materials. With the increasingly frequent demand for the chemical determination of trace amounts of elements in materials, the analytical chemist had to search for more sensitive methods of analysis. This book accustoms analytical chemists with nuclear techniques that possess the desired sensitivity and applicability at trace levels. The topics covered include safe handling of radioactivity; measurement of natural radioactivity; and neutron a

  8. State Key Laboratory of Applied Organic Chemistry

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    @@The State Key Laboratory of Applied Organic Chemistry (SKLAOC) was founded in 1987 with the approval of the State Planning Commission. Professor Liu Zhongli is the director of the Laboratory and Professor Zhang Lihe, an academician of the Chinese Academy of Sciences, is the chairman of its academic committee. There are 30 faculty members, among them 21 are professors, working in the Laboratory.

  9. Introduction to Applied Colloid and Surface Chemistry

    DEFF Research Database (Denmark)

    Kontogeorgis, Georgios; Kiil, Søren

    Colloid and Surface Chemistry is a subject of immense importance and implications both to our everyday life and numerous industrial sectors, ranging from coatings and materials to medicine and biotechnology. How do detergents really clean? (Why can’t we just use water ?) Why is milk “milky” Why do......, to the benefit of both the environment and our pocket. Cosmetics is also big business! Creams, lotions and other personal care products are really just complex emulsions. All of the above can be explained by the principles and methods of colloid and surface chemistry. A course on this topic is truly valuable...

  10. Development of applied optical techniques

    International Nuclear Information System (INIS)

    This report resents the status of researches on the applications of lasers at KAERI. A compact portable laser fluorometer detecting uranium desolved in aqueous solution was built. The laser-induced fluorescence of uranium was detected with a photomultiplier tube. A delayed gate circuit and an integrating circuit were used to process the electrical signal. A small nitrogen laser was used to excite uranium. The detecting limit is about 0.1 ppb. The effect of various acidic solutions was investigated. Standard addition technique was incorporated to improve the measuring accuracy. This instrument can be used for safety inspection of workers in the nuclear fuel cycle facilities. (Author)

  11. Development of applied optical techniques

    International Nuclear Information System (INIS)

    The objective of this project is to improve laser application techniques in nuclear industry. A small,light and portable laser induced fluorometer was developed. It was designed to compensate inner filter and quenching effects by on-line data processing during analysis of uranium in aqueous solution. Computer interface improves the accuracy and data processing capabilities of the instrument. Its detection limit is as low as 0.1 ppb of uranium. It is ready to use in routine chemical analysis. The feasible applications such as for uranium level monitoring in discards from reconversion plant or fuel fabrication plant were seriously considered with minor modification of the instrument. It will be used to study trace analysis of rare-earth elements. The IRMPD of CHF3 was carried out and the effects of buffer gases such as Ar,N2 and SF6 were investigated. The IRMPD rate was increased with increasing pressure of the reactant and buffer gases. The pressure effect of the reactant CHF3 below 0.1 Torr showed opposite results. It was considered that the competition between quenching effect and rotational hole-filling effect during intermolecular collisions plays a great role in this low pressure region. The applications of holography in nuclear fuel cycle facilities were surveyed and analyzed. Also, experimental apparatuses such as an Ar ion laser, various kinds of holographic films and several optical components were prepared. (Author)

  12. Green Chemistry Techniques for Gold Nanoparticles Synthesis

    Science.gov (United States)

    Cannavino, Sarah A.; King, Christy A.; Ferrara, Davon W.

    Gold nanoparticles (AuNPs) are often utilized in many technological and research applications ranging from the detection of tumors, molecular and biological sensors, and as nanoantennas to probe physical processes. As these applications move from the research laboratory to industrial settings, there is a need to develop efficient and sustainable synthesis techniques. Recent research has shown that several food products and beverages containing polyphenols, a common antioxidant, can be used as reducing agents in the synthesis of AuNPs in solution. In this study, we explore a variety of products to determine which allow for the most reproducible solution of nanoparticles based on the size and shapes of particles present. We analyzed the AuNPs solutions using extinction spectroscopy and atomic force microscopy. We also develop a laboratory activity to introduce introductory chemistry and physics students to AuNP synthesis techniques and analysis.

  13. Chemistry research and chemical techniques based on research reactors

    International Nuclear Information System (INIS)

    Chemistry has occupied an important position historically in the sciences associated with nuclear reactors and it continues to play a prominent role in reactor-based research investigations. This Panel of prominent scientists in the field was convened by the International Atomic Energy Agency (IAEA) to assess the present state of such chemistry research for the information of its Member States and others interested in the subject. There are two ways in which chemistry is associated with nuclear reactors: (a) general applications to many scientific fields in which chemical techniques are involved as essential service functions; and (b) specific applications of reactor facilities to the solution of chemical problems themselves. Twenty years of basic research with nuclear reactors have demonstrated a very widespread, and still increasing, demand for radioisotopes and isotopically-labelled molecules in all fields of the physical and biological sciences. Similarly, the determination of the elemental composition of a material through the analytical technique of activation analysis can be applied throughout experimental science. Refs, figs and tabs

  14. UV spectroscopy applied to stratospheric chemistry, methods and results

    Energy Technology Data Exchange (ETDEWEB)

    Karlsen, K.

    1996-03-01

    The publication from the Norwegian Institute for Air Research (NILU) deals with an investigation done on stratospheric chemistry by UV spectroscopy. The scientific goals are briefly discussed, and it gives the results from the measuring and analysing techniques used in the investigation. 6 refs., 11 figs.

  15. Applied Computational Chemistry for the Blind and Visually Impaired

    Science.gov (United States)

    Wedler, Henry B.; Cohen, Sarah R.; Davis, Rebecca L.; Harrison, Jason G.; Siebert, Matthew R.; Willenbring, Dan; Hamann, Christian S.; Shaw, Jared T.; Tantillo, Dean J.

    2012-01-01

    We describe accommodations that we have made to our applied computational-theoretical chemistry laboratory to provide access for blind and visually impaired students interested in independent investigation of structure-function relationships. Our approach utilizes tactile drawings, molecular model kits, existing software, Bash and Perl scripts…

  16. Hydrocarbon radical thermochemistry: Gas-phase ion chemistry techniques

    Energy Technology Data Exchange (ETDEWEB)

    Ervin, Kent M. [Univ. of Nevada, Reno, NV (United States)

    2014-03-21

    Final Scientific/Technical Report for the project "Hydrocarbon Radical Thermochemistry: Gas-Phase Ion Chemistry Techniques." The objective of this project is to exploit gas-phase ion chemistry techniques for determination of thermochemical values for neutral hydrocarbon radicals of importance in combustion kinetics.

  17. Recent advances in click chemistry applied to dendrimer synthesis.

    Science.gov (United States)

    Arseneault, Mathieu; Wafer, Caroline; Morin, Jean-François

    2015-01-01

    Dendrimers are monodisperse polymers grown in a fractal manner from a central point. They are poised to become the cornerstone of nanoscale devices in several fields, ranging from biomedicine to light-harvesting. Technical difficulties in obtaining these molecules has slowed their transfer from academia to industry. In 2001, the arrival of the "click chemistry" concept gave the field a major boost. The flagship reaction, a modified Hüisgen cycloaddition, allowed researchers greater freedom in designing and building dendrimers. In the last five years, advances in click chemistry saw a wider use of other click reactions and a notable increase in the complexity of the reported structures. This review covers key developments in the click chemistry field applied to dendrimer synthesis from 2010 to 2015. Even though this is an expert review, basic notions and references have been included to help newcomers to the field. PMID:26007183

  18. $^{31}$Mg $\\beta$-NMR applied in chemistry and biochemistry

    CERN Multimedia

    Magnesium ions, Mg$^{2+}$, are essential in biological systems, taking part in practically all phosphate chemistry, in photosynthesis as an integral component of chlorophyll, and they are regulated via transport through selective membrane proteins. Nonetheless, the function of magnesium ions in biochemistry is difficult to characterize, as it is practically invisible to current experimental techniques. With this proposal we aim to advance the use of $^{31}$Mg $\\beta$-NMR to liquid samples, building on the experience from the successful Letter of Intent INTC-I-088 “$\\beta$-NMR as a novel technique for biological applications”. Initially a series of experiments will be conducted aiming to characterize the coordination chemistry of Mg$^{2+}$ in ionic liquids (ILs), demonstrating that it is possible within the lifetime of the radioisotope to achieve binding of Mg$^{2+}$ to a molecule dissolved in the IL. ILs are chosen as they display a very low vapor pressure, and are thus straightforwardly compatible with t...

  19. Computational optimization techniques applied to microgrids planning

    DEFF Research Database (Denmark)

    Gamarra, Carlos; Guerrero, Josep M.

    2015-01-01

    ), their planning process must be addressed to economic feasibility, as a long-term stability guarantee. Planning a microgrid is a complex process due to existing alternatives, goals, constraints and uncertainties. Usually planning goals conflict each other and, as a consequence, different optimization problems...... appear along the planning process. In this context, technical literature about optimization techniques applied to microgrid planning have been reviewed and the guidelines for innovative planning methodologies focused on economic feasibility can be defined. Finally, some trending techniques and new...... microgrid planning approaches are pointed out....

  20. Applying green chemistry to the photochemical route to artemisinin

    Science.gov (United States)

    Amara, Zacharias; Bellamy, Jessica F. B.; Horvath, Raphael; Miller, Samuel J.; Beeby, Andrew; Burgard, Andreas; Rossen, Kai; Poliakoff, Martyn; George, Michael W.

    2015-06-01

    Artemisinin is an important antimalarial drug, but, at present, the environmental and economic costs of its semi-synthetic production are relatively high. Most of these costs lie in the final chemical steps, which follow a complex acid- and photo-catalysed route with oxygenation by both singlet and triplet oxygen. We demonstrate that applying the principles of green chemistry can lead to innovative strategies that avoid many of the problems in current photochemical processes. The first strategy combines the use of liquid CO2 as solvent and a dual-function solid acid/photocatalyst. The second strategy is an ambient-temperature reaction in aqueous mixtures of organic solvents, where the only inputs are dihydroartemisinic acid, O2 and light, and the output is pure, crystalline artemisinin. Everything else—solvents, photocatalyst and aqueous acid—can be recycled. Some aspects developed here through green chemistry are likely to have wider application in photochemistry and other reactions.

  1. Applying green chemistry to the photochemical route to artemisinin.

    Science.gov (United States)

    Amara, Zacharias; Bellamy, Jessica F B; Horvath, Raphael; Miller, Samuel J; Beeby, Andrew; Burgard, Andreas; Rossen, Kai; Poliakoff, Martyn; George, Michael W

    2015-06-01

    Artemisinin is an important antimalarial drug, but, at present, the environmental and economic costs of its semi-synthetic production are relatively high. Most of these costs lie in the final chemical steps, which follow a complex acid- and photo-catalysed route with oxygenation by both singlet and triplet oxygen. We demonstrate that applying the principles of green chemistry can lead to innovative strategies that avoid many of the problems in current photochemical processes. The first strategy combines the use of liquid CO2 as solvent and a dual-function solid acid/photocatalyst. The second strategy is an ambient-temperature reaction in aqueous mixtures of organic solvents, where the only inputs are dihydroartemisinic acid, O2 and light, and the output is pure, crystalline artemisinin. Everything else-solvents, photocatalyst and aqueous acid-can be recycled. Some aspects developed here through green chemistry are likely to have wider application in photochemistry and other reactions.

  2. Recent Advances in Click Chemistry Applied to Dendrimer Synthesis

    Directory of Open Access Journals (Sweden)

    Mathieu Arseneault

    2015-05-01

    Full Text Available Dendrimers are monodisperse polymers grown in a fractal manner from a central point. They are poised to become the cornerstone of nanoscale devices in several fields, ranging from biomedicine to light-harvesting. Technical difficulties in obtaining these molecules has slowed their transfer from academia to industry. In 2001, the arrival of the “click chemistry” concept gave the field a major boost. The flagship reaction, a modified Hüisgen cycloaddition, allowed researchers greater freedom in designing and building dendrimers. In the last five years, advances in click chemistry saw a wider use of other click reactions and a notable increase in the complexity of the reported structures. This review covers key developments in the click chemistry field applied to dendrimer synthesis from 2010 to 2015. Even though this is an expert review, basic notions and references have been included to help newcomers to the field.

  3. Preparing polymeric biomaterials using "click" chemistry techniques

    Science.gov (United States)

    Lin, Fei

    Significant efforts have been focused on preparing degradable polymeric biomaterials with controllable properties, which have the potential to stimulate specific cellular responses at the molecular level. Click reactions provide a universal tool box to achieve that goal through molecular level design and modification. This dissertation demonstrates multiple methodologies and techniques to develop advanced biomaterials through combining degradable polymers and click chemistry. In my initial work, a novel class of amino acid-based poly(ester urea)s (PEU) materials was designed and prepared for potential applications in bone defect treatment. PEUs were synthesized via interfacial polycondensation, and showed degradability in vivo and possessed mechanical strength superior to conventionally used polyesters. Further mechanical enhancement was achieved after covalent crosslinking with a short peptide crosslinker derived from osteogenic growth peptide (OGP). The in vitro and in an in vivo subcutaneous rat model demonstrated that the OGP-based crosslinkers promoted proliferative activity of cells and accelerated degradation properties of PEUs. As a continuous study, extra efforts were focused on the development of PEUs with functional pendant groups, including alkyne, azide, alkene, tyrosine phenol, and ketone groups. PEUs with Mw exceeding to 100K Da were obtained via interfacial polycondensation, and the concentration of pendent groups was varied using a copolymerization strategy. Electrospinning was used to fabricate PEU nanofiber matrices with mechanical strengths suitable for tissue engineering. A series of biomolecules were conjugated to nanofiber surface following electrospinning using click reactions in aqueous media. The ability to derivatize PEUs with biological motifs using high efficient chemical reactions will significantly expand their use in vitro and in vivo. Based on similar principles, a series of mono- and multifunctionalized polycaprolactone (PCL

  4. Green chemistry applied to corrosion and scale inhibitors

    Energy Technology Data Exchange (ETDEWEB)

    Darling, D.; Rakshpal, R. [Environmental Protection Agency, Washington, DC (United States)

    1998-12-31

    Numerous breakthroughs in environmental protection and pollution prevention have been realized in recent years by both industry and academia through the application of green chemistry principles. Green chemistry, or pollution prevention at the molecular level, is chemistry designed to reduce or eliminate the use or generation of hazardous materials associated with the manufacture and application of chemicals. The application of the green chemistry principles to the areas of corrosion and scale inhibitors has resulted in the reduction/elimination of many of the more toxic inhibitors and the development of newer, more environmentally friendly ones.

  5. Applying medicinal chemistry strategies to understand odorant discrimination

    OpenAIRE

    Poivet, Erwan; Peterlin, Zita; Tahirova, Narmin; Xu, Lu; Altomare, Clara; Paria, Anne; Zou, Dong-Jing; Firestein, Stuart

    2016-01-01

    Associating an odorant's chemical structure with its percept is a long-standing challenge. One hindrance may come from the adoption of the organic chemistry scheme of molecular description and classification. Chemists classify molecules according to characteristics that are useful in synthesis or isolation, but which may be of little importance to a biological sensory system. Accordingly, we look to medicinal chemistry, which emphasizes biological function over chemical form, in an attempt to...

  6. Applying Mixed Methods Techniques in Strategic Planning

    Science.gov (United States)

    Voorhees, Richard A.

    2008-01-01

    In its most basic form, strategic planning is a process of anticipating change, identifying new opportunities, and executing strategy. The use of mixed methods, blending quantitative and qualitative analytical techniques and data, in the process of assembling a strategic plan can help to ensure a successful outcome. In this article, the author…

  7. Uranium chemistry in blood and aqueous media. Techniques of studies

    International Nuclear Information System (INIS)

    The object of this report in a first step, is to understand the chemistry of uranium in aqueous phase by specifying the behavior of this element in function of several parameters such PH, concentration of present species, temperature, ionic force. In a second step, investigation techniques are reviewed: X rays diffraction, potentiometric titrations, polarography, spectrophotometry, NMR of 13C, 31P, 17O, capillary electrophoresis, laser detection. The third part brings elements to understand the uranium complexation in blood medium

  8. Digital Speckle Technique Applied to Flow Visualization

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Digital speckle technique uses a laser, a CCD camera, and digital processing to generate interference fringes at the television framing rate. Its most obvious advantage is that neither darkroom facilities nor photographic wet chemical processing is required. In addition, it can be used in harsh engineering environments. This paper discusses the strengths and weaknesses of three digital speckle methodologies. (1) Digital speckle pattern interferometry (DSPI) uses an optical polarization phase shifter for visualization and measurement of the density field in a flow field. (2) Digital shearing speckle interferometry (DSSI) utilizes speckle-shearing interferometry in addition to optical polarization phase shifting. (3) Digital speckle photography (DSP) with computer reconstruction. The discussion describes the concepts, the principles and the experimental arrangements with some experimental results. The investigation shows that these three digital speckle techniques provide an excellent method for visualizing flow fields and for measuring density distributions in fluid mechanics and thermal flows.

  9. Applying Cooperative Techniques in Teaching Problem Solving

    Directory of Open Access Journals (Sweden)

    Krisztina Barczi

    2013-12-01

    Full Text Available Teaching how to solve problems – from solving simple equations to solving difficult competition tasks – has been one of the greatest challenges for mathematics education for many years. Trying to find an effective method is an important educational task. Among others, the question arises as to whether a method in which students help each other might be useful. The present article describes part of an experiment that was designed to determine the effects of cooperative teaching techniques on the development of problem-solving skills.

  10. Basic principles of applied nuclear techniques

    International Nuclear Information System (INIS)

    The technological applications of radioactive isotopes and radiation in South Africa have grown steadily since the first consignment of man-made radioisotopes reached this country in 1948. By the end of 1975 there were 412 authorised non-medical organisations (327 industries) using hundreds of sealed sources as well as their fair share of the thousands of radioisotope consignments, annually either imported or produced locally (mainly for medical purposes). Consequently, it is necessary for South African technologists to understand the principles of radioactivity in order to appreciate the industrial applications of nuclear techniques

  11. Applying medicinal chemistry strategies to understand odorant discrimination

    Science.gov (United States)

    Poivet, Erwan; Peterlin, Zita; Tahirova, Narmin; Xu, Lu; Altomare, Clara; Paria, Anne; Zou, Dong-Jing; Firestein, Stuart

    2016-01-01

    Associating an odorant's chemical structure with its percept is a long-standing challenge. One hindrance may come from the adoption of the organic chemistry scheme of molecular description and classification. Chemists classify molecules according to characteristics that are useful in synthesis or isolation, but which may be of little importance to a biological sensory system. Accordingly, we look to medicinal chemistry, which emphasizes biological function over chemical form, in an attempt to discern which among the many molecular features are most important for odour discrimination. Here we use medicinal chemistry concepts to assemble a panel of molecules to test how heteroaromatic ring substitution of the benzene ring will change the odour percept of acetophenone. This work allows us to describe an extensive rule in odorant detection by mammalian olfactory receptors. Whereas organic chemistry would have predicted the ring size and composition to be key features, our work reveals that the topological polar surface area is the key feature for the discrimination of these odorants. PMID:27040654

  12. Applied techniques for mining natural proteasome inhibitors.

    Science.gov (United States)

    Stein, Martin L; Groll, Michael

    2014-01-01

    In eukaryotic cells, the ubiquitin-proteasome-system (UPS) is responsible for the non-lysosomal degradation of proteins and plays a pivotal role in such vital processes as protein homeostasis, antigen processing or cell proliferation. Therefore, it is an attractive drug target with various applications in cancer and immunosuppressive therapies. Being an evolutionary well conserved pathway, many pathogenic bacteria have developed small molecules, which modulate the activity of their hosts' UPS components. Such natural products are, due to their stepwise optimization over the millennia, highly potent in terms of their binding mechanisms, their bioavailability and selectivity. Generally, this makes bioactive natural products an ideal starting point for the development of novel drugs. Since four out of the ten best seller drugs are natural product derivatives, research in this field is still of unfathomable value for the pharmaceutical industry. The currently most prominent example for the successful exploitation of a natural compound in the UPS field is carfilzomib (Kyprolis®), which represents the second FDA approved drug targeting the proteasome after the admission of the blockbuster bortezomib (Velcade®) in 2003. On the other hand side of the spectrum, ONX 0914, which is derived from the same natural product as carfilzomib, has been shown to selectively inhibit the immune response related branch of the pathway. To date, there exists a huge potential of UPS inhibitors with regard to many diseases. Both approved drugs against the proteasome show severe side effects, adaptive resistances and limited applicability, thus the development of novel compounds with enhanced properties is a main objective of active research. In this review, we describe the techniques, which can be utilized for the discovery of novel natural inhibitors, which in particular block the 20S proteasomal activity. In addition, we will illustrate the successful implementation of a recently

  13. Radioanalytical Techniques Applied to Environmental Chemistry: a Two Case Study.

    Science.gov (United States)

    Holmes, Jennifer L.

    Case I. Collection of atmospheric aerosol began at Mauna Loa Observatory in February of 1979. A sector controller was installed in May of 1980. Weekly samples were collected. One half of the particle filters were analyzed by instrumental neutron activation analysis (INAA) for elemental quantitation and the other half was analyzed by ion chromatography (IC) for sulfate. Sampling was later modified to include four base treated filters sequentially. One half of the particle filter was still analyzed by INAA and one quarter was analyzed by IC for anions of chloride, nitrate and sulfate. One half of the four base treated filters was also analyzed by IC. This yields a twelve year data record of weekly elemental aerosol concentrations. The most dominant source of trace metals to the 3400 m MLO site is crustal material. The large dust storms in the Chinese deserts loft immense amounts of crustal material into the troposphere every year. A typical elemental signature for Asian dust at MLO is determined. Other sources for aerosol particles in the free troposphere are marine and anthropogenic. Anthropogenic sources tend to contribute less than marine sources overall. One pollution episode in 1989 perturbed the vanadium budget by nearly three orders of magnitude. Also crustal excess values for several elements are modeled poorly with a local Hawaiian Basalt signature. Acidic gaseous nitrogen species and particulate nitrate both follow a clear seasonal trend, which is not highly correlated to the Asian dust episodes. Acidic gaseous chloride and particulate chloride together yield a marine enrichment factor near one, implying that the source for the gaseous chloride is sea salt, which has reacted with the rm H_2SO_4 in atmosphere to release HCl gas. Most of the sulfate found exists as a particle rather than in an acidic gaseous sulfur species. Case II. First prompt gamma-ray spectroscopy is discussed. A preliminary study of sewage sludge was done at the Los Alamos National Laboratory's PGRS system. The results are presented with projected detection limits of various elements relative to hydrogen. A preliminary design is then given with projected sensitivities and scan times calculated for various elements. (Abstract shortened by UMI.).

  14. Radioanalytical techniques applied to environmental chemistry: A two case study

    International Nuclear Information System (INIS)

    Collection of atmospheric aerosol began at Mauna Loa Observatory in February of 1979. A sector controller was installed in May of 1980. Weekly samples were collected. One half of the particle filters were analyzed by instrumental neutron activation analysis (INAA) for elemental quantitation and the other half was analyzed by ion chromatography (IC) for sulfate. Sampling was later modified to include four base treated filters sequentially. One half of the particle filter was still analyzed by INAA and one quarter was analyzed by IC for anions of chloride, nitrate and sulfate. One half of the four base treated filters was also analyzed by IC. This yields a twelve year data record of weekly elemental aerosol concentrations. The most dominant source of trace metals to the 3400 m MLO site is crustal material. The large dust storms in the Chinese deserts loft immense amounts of crustal material into the troposphere every year. Other sources for aerosol particles in the free troposphere are marine and anthropogenic. Anthropogenic sources tend to contribute less than marine sources overall. One pollution episode in 1989 perturbed the vanadium budget by three orders of magnitude. Acidic gaseous nitrogen species and particulate nitrate both follow a clear seasonal trend, which is not highly correlated to the Asian dust episodes. Acidic gaseous chloride and particulate chloride together yield a marine enrichment factor near one, implying that the source for the gaseous chloride is sea salt, which has reacted with the H2SO2 in atmosphere to release HCl gas. Most of the sulfate found exists as a particle rather than in an acidic gaseous sulfur species. First prompt gamma-ray spectroscopy is discussed. A preliminary study of sewage sludge was done at the Los Alamos National Lab.'s PGRS system. The results are presented with projected detection limits of various elements relative to hydrogen

  15. The JMB Applied Chemistry Syllabus--the Place of Case Studies and Industrial Processes

    Science.gov (United States)

    Hallas, G.; Hughes, W. J.

    1974-01-01

    Describes two novel topics in the JMB Applied Chemistry Core Syllabus. These are the social and economic aspects of chemical technology, involving the use of six case studies, and industrial processes. (Author/GS)

  16. Applying DEA Technique to Library Evaluation in Academic Research Libraries.

    Science.gov (United States)

    Shim, Wonsik

    2003-01-01

    This study applied an analytical technique called Data Envelopment Analysis (DEA) to calculate the relative technical efficiency of 95 academic research libraries, all members of the Association of Research Libraries. DEA, with the proper model of library inputs and outputs, can reveal best practices in the peer groups, as well as the technical…

  17. The Ueberdruck Gas-Jet transport technique (UEGJ) for fast chemistry

    International Nuclear Information System (INIS)

    The UEGJ transport technique transports short-lived radioactive nuclides to low background areas for chemical separation and/or on-line γ- and X-ray analysis. A pressure difference of a few torr (3-5) is enough to maintain the gas-jet, thus eliminating the need for costly pumping systems and making it possible to perform chemistry at atmospheric pressure. This UEGJ was applied to a variety of radioactive sources. There is a Z-dependence of the transporting efficiency for the various transported nuclides as a function of the transporting gas and extracting solvent. This dependence varies by as much as two orders of magnitude. This result is of importance in cross section and mass distribution studies where gas-jet transport techniques are used in general. (orig.)

  18. Sensor Data Qualification Technique Applied to Gas Turbine Engines

    Science.gov (United States)

    Csank, Jeffrey T.; Simon, Donald L.

    2013-01-01

    This paper applies a previously developed sensor data qualification technique to a commercial aircraft engine simulation known as the Commercial Modular Aero-Propulsion System Simulation 40,000 (C-MAPSS40k). The sensor data qualification technique is designed to detect, isolate, and accommodate faulty sensor measurements. It features sensor networks, which group various sensors together and relies on an empirically derived analytical model to relate the sensor measurements. Relationships between all member sensors of the network are analyzed to detect and isolate any faulty sensor within the network.

  19. Applied Chemistry Division progress report for the period 1993-1995

    International Nuclear Information System (INIS)

    The report covers the research and development (R and D) activities of the Applied Chemistry Division for the period January 1993 to December 1995. This period is marked by important contributions pertaining to the R and D programmes on chemistry aspects related to nuclear power stations. The thrust areas of the Division's R and D programmes are : chemical decontamination of nuclear reactor systems, metal-water interactions relevant to the Nuclear Power Stations and other industrial units of the Department, biofouling and its control in cooling water circuits and cooling water treatment. Other major research programmes are in the areas of radiation chemistry, solid state reactions and thermodynamic studies aimed at reactor applications. refs., 9 tabs., 1 fig

  20. Technique applied in electrical power distribution for Satellite Launch Vehicle

    Directory of Open Access Journals (Sweden)

    João Maurício Rosário

    2010-09-01

    Full Text Available The Satellite Launch Vehicle electrical network, which is currently being developed in Brazil, is sub-divided for analysis in the following parts: Service Electrical Network, Controlling Electrical Network, Safety Electrical Network and Telemetry Electrical Network. During the pre-launching and launching phases, these electrical networks are associated electrically and mechanically to the structure of the vehicle. In order to succeed in the integration of these electrical networks it is necessary to employ techniques of electrical power distribution, which are proper to Launch Vehicle systems. This work presents the most important techniques to be considered in the characterization of the electrical power supply applied to Launch Vehicle systems. Such techniques are primarily designed to allow the electrical networks, when submitted to the single-phase fault to ground, to be able of keeping the power supply to the loads.

  1. Applied Chemistry Division progress report for the period 1990-1992

    International Nuclear Information System (INIS)

    The report covers the research and development (R and D) activities of the Applied Chemistry Division for the period January 1990 to December, 1992. R and D programmes of the Division are formulated to study the chemical aspects related to nuclear power plants and heavy water plants. The Division also gives consultancy to DAE units and outside agencies on water chemistry problems. The thrust areas of the Division's R and D programmes are : decontamination of nuclear facilities, metal water interaction of the materials used in PHT system, chemistry of soluble poisons, biofouling and its control in cooling water circuits, and treatment of cooling waters. Other major R and D activities are in the areas of: solid state reactions and high temperature thermodynamics, primary coolant water chemistry, speciation studies in metal amine systems, high temperature aqueous radiation chemistry. The Division was engaged in studies in novel areas such as dental implants, remote sealing of pipes in MS pipes, and cold fusion. The Division also designed and fabricated instruments like the Knudsen cell mass spectrometer, calorimeters and developed required software. All these R and D activities are reported in the form of individual summaries. A list of publications from the Division and a list of the staff members of the Division are given at the end of the report. (author). tabs., figs., appendices

  2. Independent Instruction in High School Chemistry: A Comparison with a Traditional Technique.

    Science.gov (United States)

    Braly, Joe Lee

    The purpose of the study was to determine differences in chemistry resulting from a traditional and an independent technique of teaching. The population included four chemistry classes at Scottsdale Saguaro High School. Intact groups were assigned to experimental or control groups by random processes. The control group was presented the CHEM Study…

  3. Time-resolved techniques. Useful tools for fundamental investigations in radiation chemistry of derivatives of polysaccharides

    International Nuclear Information System (INIS)

    Time-resolved techniques such as pulse radiolysis with electron linear accelerator and flash photolysis with excimer laser have been utilized as useful tools for fundamental investigations in radiation chemistry of aqueous solutions of derivatives of polysaccharides. (author)

  4. Technique for atmospheric rate chemistry calculations. [of SST exhaust

    Science.gov (United States)

    Matloff, G. L.

    1976-01-01

    The possibility that predictions of atmospheric photochemistry/transport models are sensitive to uncertainties in reaction rates and other inputs stresses the need for rapid numerical integration schemes in rate photochemistry problems. Reducing the computational burden has a major merit in facilitating sensitivity studies to assess the effect of uncertainties on predicted ozone diminutions from NOx (NO + NO2) in the exhaust plume of SST engines. The paper discusses the validity of an algorithmic approach to integration of rate chemistry problems in combustion, developed by Rubel and Baronti for an approximate calculation of the production rate of the i-th chemical species involved. An analysis of two projected SST engines confirms the validity of the proposed algorithm. Because of the relative arithmetical simplicity, it may be easier to treat diffusion rate chemistry calculations using the Rubel and Baronti approximation than would be possible by other approaches.

  5. Applying Stylometric Analysis Techniques to Counter Anonymity in Cyberspace

    Directory of Open Access Journals (Sweden)

    Jianwen Sun

    2012-02-01

    Full Text Available Due to the ubiquitous nature and anonymity abuses in cyberspace, it’s difficult to make criminal identity tracing in cybercrime investigation. Writeprint identification offers a valuable tool to counter anonymity by applying stylometric analysis technique to help identify individuals based on textual traces. In this study, a framework for online writeprint identification is proposed. Variable length character n-gram is used to represent the author’s writing style. The technique of IG seeded GA based feature selection for Ensemble (IGAE is also developed to build an identification model based on individual author level features. Several specific components for dealing with the individual feature set are integrated to improve the performance. The proposed feature and technique are evaluated on a real world data set encompassing reviews posted by 50 Amazon customers. The experimental results show the effectiveness of the proposed framework, with accuracy over 94% for 20 authors and over 80% for 50 ones. Compared with the baseline technique (Support Vector Machine, a higher performance is achieved by using IGAE, resulting in a 2% and 8% improvement over SVM for 20 and 50 authors respectively. Moreover, it has been shown that IGAE is more scalable in terms of the number of authors, than author group level based methods.

  6. Three-dimensional integrated CAE system applying computer graphic technique

    International Nuclear Information System (INIS)

    A three-dimensional CAE system for nuclear power plant design is presented. This system utilizes high-speed computer graphic techniques for the plant design review, and an integrated engineering database for handling the large amount of nuclear power plant engineering data in a unified data format. Applying this system makes it possible to construct a nuclear power plant using only computer data from the basic design phase to the manufacturing phase, and it increases the productivity and reliability of the nuclear power plants. (author)

  7. Hyperspectral-imaging-based techniques applied to wheat kernels characterization

    Science.gov (United States)

    Serranti, Silvia; Cesare, Daniela; Bonifazi, Giuseppe

    2012-05-01

    Single kernels of durum wheat have been analyzed by hyperspectral imaging (HSI). Such an approach is based on the utilization of an integrated hardware and software architecture able to digitally capture and handle spectra as an image sequence, as they results along a pre-defined alignment on a surface sample properly energized. The study was addressed to investigate the possibility to apply HSI techniques for classification of different types of wheat kernels: vitreous, yellow berry and fusarium-damaged. Reflectance spectra of selected wheat kernels of the three typologies have been acquired by a laboratory device equipped with an HSI system working in near infrared field (1000-1700 nm). The hypercubes were analyzed applying principal component analysis (PCA) to reduce the high dimensionality of data and for selecting some effective wavelengths. Partial least squares discriminant analysis (PLS-DA) was applied for classification of the three wheat typologies. The study demonstrated that good classification results were obtained not only considering the entire investigated wavelength range, but also selecting only four optimal wavelengths (1104, 1384, 1454 and 1650 nm) out of 121. The developed procedures based on HSI can be utilized for quality control purposes or for the definition of innovative sorting logics of wheat.

  8. Image analysis technique applied to lock-exchange gravity currents

    Science.gov (United States)

    Nogueira, Helena I. S.; Adduce, Claudia; Alves, Elsa; Franca, Mário J.

    2013-04-01

    An image analysis technique is used to estimate the two-dimensional instantaneous density field of unsteady gravity currents produced by full-depth lock-release of saline water. An experiment reproducing a gravity current was performed in a 3.0 m long, 0.20 m wide and 0.30 m deep Perspex flume with horizontal smooth bed and recorded with a 25 Hz CCD video camera under controlled light conditions. Using dye concentration as a tracer, a calibration procedure was established for each pixel in the image relating the amount of dye uniformly distributed in the tank and the greyscale values in the corresponding images. The results are evaluated and corrected by applying the mass conservation principle within the experimental tank. The procedure is a simple way to assess the time-varying density distribution within the gravity current, allowing the investigation of gravity current dynamics and mixing processes.

  9. Electrochemical Techniques for the Study of Brain Chemistry.

    Science.gov (United States)

    Schenk, James O.; And Others

    1983-01-01

    Using ascorbic acid enzyme assays in conjunction with chronoamperometric measurements, reliable values for the principal electroactive components in the rat caudate extracellular fluid were established. Techniques used in the study are discussed. (JN)

  10. Analytical techniques applied to study cultural heritage objects

    Energy Technology Data Exchange (ETDEWEB)

    Rizzutto, M.A.; Curado, J.F.; Bernardes, S.; Campos, P.H.O.V.; Kajiya, E.A.M.; Silva, T.F.; Rodrigues, C.L.; Moro, M.; Tabacniks, M.; Added, N., E-mail: rizzutto@if.usp.br [Universidade de Sao Paulo (USP), SP (Brazil). Instituto de Fisica

    2015-07-01

    The scientific study of artistic and cultural heritage objects have been routinely performed in Europe and the United States for decades. In Brazil this research area is growing, mainly through the use of physical and chemical characterization methods. Since 2003 the Group of Applied Physics with Particle Accelerators of the Physics Institute of the University of Sao Paulo (GFAA-IF) has been working with various methodologies for material characterization and analysis of cultural objects. Initially using ion beam analysis performed with Particle Induced X-Ray Emission (PIXE), Rutherford Backscattering (RBS) and recently Ion Beam Induced Luminescence (IBIL), for the determination of the elements and chemical compounds in the surface layers. These techniques are widely used in the Laboratory of Materials Analysis with Ion Beams (LAMFI-USP). Recently, the GFAA expanded the studies to other possibilities of analysis enabled by imaging techniques that coupled with elemental and compositional characterization provide a better understanding on the materials and techniques used in the creative process in the manufacture of objects. The imaging analysis, mainly used to examine and document artistic and cultural heritage objects, are performed through images with visible light, infrared reflectography (IR), fluorescence with ultraviolet radiation (UV), tangential light and digital radiography. Expanding more the possibilities of analysis, new capabilities were added using portable equipment such as Energy Dispersive X-Ray Fluorescence (ED-XRF) and Raman Spectroscopy that can be used for analysis 'in situ' at the museums. The results of these analyzes are providing valuable information on the manufacturing process and have provided new information on objects of different University of Sao Paulo museums. Improving the arsenal of cultural heritage analysis it was recently constructed an 3D robotic stage for the precise positioning of samples in the external beam setup

  11. ESR dating technique applied to Pleistocene Corals (Barbados Island)

    International Nuclear Information System (INIS)

    In this work we applied the ESR (Electron Spin Resonance) dating technique to a coral coming from Barbados island. After a preliminary purification treatment, coral samples were milled and separated in different granulometry groups. Powder samples having granulometry values between 125 μm-250 μm and 250 μm-500 μm were irradiated at the Calliope60 Co radioisotope source (R.C. ENEA-Casaccia) at doses between 10-3300 Gγ and their radiation induced ESR signals were measured by a Bruker EMS1O4 spectrometer. The signal/noise ratio turned to be highest far the granulometry between 250 μm-500 μm and consequently the paleo-curve was constructed by using the ESR signals related to this granulometry value. The paleo-curve was fitted with the exponential growth function y = a - b · e-cx which well describes the behaviour of the curve also in the saturation region. Extrapolating the paleo-dose and knowing the annual dose (999±79 μGy/y) we calculated a coral age of 156±12 ky, which is in good agreement with results obtained on coral coming from the same region by other authors

  12. Research on the development of green chemistry technology assessment techniques: a material reutilization case

    Science.gov (United States)

    Hong, Seokpyo; Ahn, Kilsoo; Kim, Sungjune; Gong, Sungyong

    2015-01-01

    Objectives This study presents a methodology that enables a quantitative assessment of green chemistry technologies. Methods The study carries out a quantitative evaluation of a particular case of material reutilization by calculating the level of “greenness” i.e., the level of compliance with the principles of green chemistry that was achieved by implementing a green chemistry technology. Results The results indicate that the greenness level was enhanced by 42% compared to the pre-improvement level, thus demonstrating the economic feasibility of green chemistry. Conclusions The assessment technique established in this study will serve as a useful reference for setting the direction of industry-level and government-level technological R&D and for evaluating newly developed technologies, which can greatly contribute toward gaining a competitive advantage in the global market. PMID:26206363

  13. Volcanic Monitoring Techniques Applied to Controlled Fragmentation Experiments

    Science.gov (United States)

    Kueppers, U.; Alatorre-Ibarguengoitia, M. A.; Hort, M. K.; Kremers, S.; Meier, K.; Scharff, L.; Scheu, B.; Taddeucci, J.; Dingwell, D. B.

    2010-12-01

    Volcanic eruptions are an inevitable natural threat. The range of eruptive styles is large and short term fluctuations of explosivity or vent position pose a large risk that is not necessarily confined to the immediate vicinity of a volcano. Explosive eruptions rather may also affect aviation, infrastructure and climate, regionally as well as globally. Multiparameter monitoring networks are deployed on many active volcanoes to record signs of magmatic processes and help elucidate the secrets of volcanic phenomena. However, our mechanistic understanding of many processes hiding in recorded signals is still poor. As a direct consequence, a solid interpretation of the state of a volcano is still a challenge. In an attempt to bridge this gap, we combined volcanic monitoring and experimental volcanology. We performed 15 well-monitored, field-based, experiments and fragmented natural rock samples from Colima volcano (Mexico) by rapid decompression. We used cylindrical samples of 60 mm height and 25 mm and 60 mm diameter, respectively, and 25 and 35 vol.% open porosity. The applied pressure range was from 4 to 18 MPa. Using different experimental set-ups, the pressurised volume above the samples ranged from 60 - 170 cm3. The experiments were performed at ambient conditions and at controlled sample porosity and size, confinement geometry, and applied pressure. The experiments have been thoroughly monitored with 1) Doppler Radar (DR), 2) high-speed and high-definition cameras, 3) acoustic and infrasound sensors, 4) pressure transducers, and 5) electrically conducting wires. Our aim was to check for common results achieved by the different approaches and, if so, calibrate state-of-the-art monitoring tools. We present how the velocity of the ejected pyroclasts was measured by and evaluated for the different approaches and how it was affected by the experimental conditions and sample characteristics. We show that all deployed instruments successfully measured the pyroclast

  14. Using a Collaborative Critiquing Technique to Develop Chemistry Students' Technical Writing Skills

    Science.gov (United States)

    Carr, Jeremy M.

    2013-01-01

    The technique, termed "collaborative critiquing", was developed to teach fundamental technical writing skills to analytical chemistry students for the preparation of laboratory reports. This exercise, which can be completed prior to peer-review activities, is novel, highly interactive, and allows students to take responsibility for their…

  15. A Multi-Technique Forensic Experiment for a Nonscience-Major Chemistry Course

    Science.gov (United States)

    Szalay, Paul S.; Zook-Gerdau, Lois Anne; Schurter, Eric J.

    2011-01-01

    This multi-technique experiment with a forensic theme was developed for a nonscience-major chemistry course. The students are provided with solid samples and informed that the samples are either cocaine or a combination of drugs designed to mimic the stimulant and anesthetic qualities of cocaine such as caffeine and lidocaine. The students carry…

  16. A Cost-Effective Two-Part Experiment for Teaching Introductory Organic Chemistry Techniques

    Science.gov (United States)

    Sadek, Christopher M.; Brown, Brenna A.; Wan, Hayley

    2011-01-01

    This two-part laboratory experiment is designed to be a cost-effective method for teaching basic organic laboratory techniques (recrystallization, thin-layer chromatography, column chromatography, vacuum filtration, and melting point determination) to large classes of introductory organic chemistry students. Students are exposed to different…

  17. An Enzymatic Clinical Chemistry Laboratory Experiment Incorporating an Introduction to Mathematical Method Comparison Techniques

    Science.gov (United States)

    Duxbury, Mark

    2004-01-01

    An enzymatic laboratory experiment based on the analysis of serum is described that is suitable for students of clinical chemistry. The experiment incorporates an introduction to mathematical method-comparison techniques in which three different clinical glucose analysis methods are compared using linear regression and Bland-Altman difference…

  18. Techniques to Enhance Instructors' Teaching Effectiveness with Chemistry Students Who Are Blind or Visually Impaired

    Science.gov (United States)

    Supalo, Cary

    2005-01-01

    This paper describes techniques developed as solutions to problems encountered while teaching blind or visually impaired students in chemistry courses at high school and postsecondary levels. Establishing and maintaining a sound student-instructor relationship is critical to the success and implementation of a plan of action for blind or visually…

  19. Waste minimization in analytical chemistry through innovative sample preparation techniques

    International Nuclear Information System (INIS)

    water samples. In this SPME technique, a fused-silica fiber coated with a polymeric film is exposed to the sample, extraction is allowed to take place, and then the analytes are thermally desorbed for GC analysis. Unlike liquid-liquid extraction or solid-phase extraction, SPME consumes all of the extracted sample in the analysis, significantly reducing the required sample volume

  20. Multicriterial Evaluation of Applying Japanese Management Concepts, Methods and Techniques

    OpenAIRE

    Podobiński, Mateusz

    2014-01-01

    Japanese management concepts, methods and techniques refer to work organization and improvements to companies’ functioning. They appear in numerous Polish companies, especially in the manufacturing ones. Cultural differences are a major impediment in their implementation. Nevertheless, the advantages of using Japanese management concepts, methods and techniques motivate the management to implement them in the company. The author shows research results, which refer to advanta...

  1. Photoacoustic technique applied to the study of skin and leather

    Science.gov (United States)

    Vargas, M.; Varela, J.; Hernández, L.; González, A.

    1998-08-01

    In this paper the photoacoustic technique is used in bull skin for the determination of thermal and optical properties as a function of the tanning process steps. Our results show that the photoacoustic technique is sensitive to the study of physical changes in this kind of material due to the tanning process.

  2. APPLYING ARTIFICIAL INTELLIGENCE TECHNIQUES TO HUMAN-COMPUTER INTERFACES

    DEFF Research Database (Denmark)

    Sonnenwald, Diane H.

    1988-01-01

    A description is given of UIMS (User Interface Management System), a system using a variety of artificial intelligence techniques to build knowledge-based user interfaces combining functionality and information from a variety of computer systems that maintain, test, and configure customer telephone...... and data networks. Three artificial intelligence (AI) techniques used in UIMS are discussed, namely, frame representation, object-oriented programming languages, and rule-based systems. The UIMS architecture is presented, and the structure of the UIMS is explained in terms of the AI techniques....

  3. Manifold learning techniques and model reduction applied to dissipative PDEs

    OpenAIRE

    Sonday, Benjamin E.; Singer, Amit; Gear, C. William; Kevrekidis, Ioannis G.

    2010-01-01

    We link nonlinear manifold learning techniques for data analysis/compression with model reduction techniques for evolution equations with time scale separation. In particular, we demonstrate a `"nonlinear extension" of the POD-Galerkin approach to obtaining reduced dynamic models of dissipative evolution equations. The approach is illustrated through a reaction-diffusion PDE, and the performance of different simulators on the full and the reduced models is compared. We also discuss the relati...

  4. Chemistry

    International Nuclear Information System (INIS)

    Research and development activities dealing with the chemical problems related to design and ultimate operation of molten-salt reactor systems are described. An experimental test stand was constructed to expose metallurgical test specimens to Te2 vapor at defined temperatures and deposition rates. To better define the chemistry of fluoroborate coolant, several aspects are being investigated. The behavior of hydroxy and oxy compounds in molten NaBF4 is being investigated to define reactions and compounds that may be involved in corrosion and/or could be involved in methods for trapping tritium. Two corrosion products of Hastelloy N, Na3CrF6 and Na5Cr3F14, were identified from fluoroborate systems. The evaluation of fluoroborate and alternate coolants continued. Research on the behavior of hydrogen and its isotopes is summarized. The solubilities of hydrogen, deuterium, and helium in Li2BeF4 are very low. The sorption of tritium on graphite was found to be significant (a few milligrams of tritium per kilogram of graphite), possibly providing a means of sequestering a portion of the tritium produced. Development of analytical methods continued with emphasis on voltammetric and spectrophotometric techniques for the in-line analysis of corrosion products such as Fe2+ and Cr3+ and the determination of the U3+/U4+ ratio in MSBR fuel salt. Similar studies were conducted with the NaBF4--NaF coolant salt. Information developed during the previous operation of the CSTF has been assessed and used to formulate plans for evaluation of in-line analytical methods in future CSTF operations. Electroanalytical and spectrophotometric research suggests that an electroactive protonic species is present in molten NaBF4--NaF, and that this species rapidly equilibrates with a volatile proton-containing species. Data obtained from the CSTF indicated that tritium was concentrated in the volatile species. (JGB)

  5. Cognitive task analysis: Techniques applied to airborne weapons training

    Energy Technology Data Exchange (ETDEWEB)

    Terranova, M.; Seamster, T.L.; Snyder, C.E.; Treitler, I.E. (Oak Ridge National Lab., TN (USA); Carlow Associates, Inc., Fairfax, VA (USA); Martin Marietta Energy Systems, Inc., Oak Ridge, TN (USA); Tennessee Univ., Knoxville, TN (USA))

    1989-01-01

    This is an introduction to cognitive task analysis as it may be used in Naval Air Systems Command (NAVAIR) training development. The focus of a cognitive task analysis is human knowledge, and its methods of analysis are those developed by cognitive psychologists. This paper explains the role that cognitive task analysis and presents the findings from a preliminary cognitive task analysis of airborne weapons operators. Cognitive task analysis is a collection of powerful techniques that are quantitative, computational, and rigorous. The techniques are currently not in wide use in the training community, so examples of this methodology are presented along with the results. 6 refs., 2 figs., 4 tabs.

  6. Metamodeling Techniques Applied to the Design of Reconfigurable Control Applications

    Directory of Open Access Journals (Sweden)

    Fogliazza Giuseppe

    2008-01-01

    Full Text Available Abstract In order to realize autonomous manufacturing systems in environments characterized by high dynamics and high complexity of task, it is necessary to improve the control system modelling and performance. This requires the use of better and reusable abstractions. In this paper, we explore the metamodel techniques as a foundation to the solution of this problem. The increasing popularity of model-driven approaches and a new generation of tools to support metamodel techniques are changing software engineering landscape, boosting the adoption of new methodologies for control application development.

  7. Metamodeling Techniques Applied to the Design of Reconfigurable Control Applications

    Directory of Open Access Journals (Sweden)

    Luca Ferrarini

    2008-02-01

    Full Text Available In order to realize autonomous manufacturing systems in environments characterized by high dynamics and high complexity of task, it is necessary to improve the control system modelling and performance. This requires the use of better and reusable abstractions. In this paper, we explore the metamodel techniques as a foundation to the solution of this problem. The increasing popularity of model-driven approaches and a new generation of tools to support metamodel techniques are changing software engineering landscape, boosting the adoption of new methodologies for control application development.

  8. Flash radiographic technique applied to fuel injector sprays

    International Nuclear Information System (INIS)

    A flash radiographic technique, using 50 ns exposure times, was used to study the pattern and density distribution of a fuel injector spray. The experimental apparatus and method are described. An 85 kVp flash x-ray generator, designed and fabricated at the Lawrence Livermore Laboratory, is utilized. Radiographic images, recorded on standard x-ray films, are digitized and computer processed

  9. Applying Website Usability Testing Techniques to Promote E-services

    OpenAIRE

    Abdel Nasser H. Zaied; Hassan, Mohamed M.; Islam S. Mohamed

    2015-01-01

    In this competitive world, websites are considered to be a key aspect of any organization’s competitiveness. In addition to visual esthetics, usability of a website is a strong determinant for user’s satisfaction and pleasure. However, lack of appropriate techniques and attributes for measuring usability may constrain the usefulness of a website. To address this issue, we conduct a statistical study to evaluate the usability levels of e-learning and e-training websites based on human (user) p...

  10. Signal Processing Techniques Applied in RFI Mitigation of Radio Astronomy

    OpenAIRE

    Sixiu Wang; Zhengwen Sun; Weixia Wang; Liangquan Jia

    2012-01-01

    Radio broadcast and telecommunications are present at different power levels everywhere on Earth. Radio Frequency Interference (RFI) substantially limits the sensitivity of existing radio telescopes in several frequency bands and may prove to be an even greater obstacle for next generation of telescopes (or arrays) to overcome. A variety of RFI detection and mitigation techniques have been developed in recent years. This study describes various signal process methods of RFI mitigation in radi...

  11. Ion beam analysis techniques applied to large scale pollution studies

    Energy Technology Data Exchange (ETDEWEB)

    Cohen, D.D.; Bailey, G.; Martin, J.; Garton, D.; Noorman, H.; Stelcer, E.; Johnson, P. [Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia)

    1993-12-31

    Ion Beam Analysis (IBA) techniques are ideally suited to analyse the thousands of filter papers a year that may originate from a large scale aerosol sampling network. They are fast multi-elemental and, for the most part, non-destructive so other analytical methods such as neutron activation and ion chromatography can be performed afterwards. ANSTO in collaboration with the NSW EPA, Pacific Power and the Universities of NSW and Macquarie has established a large area fine aerosol sampling network covering nearly 80,000 square kilometres of NSW with 25 fine particle samplers. This network known as ASP was funded by the Energy Research and Development Corporation (ERDC) and commenced sampling on 1 July 1991. The cyclone sampler at each site has a 2.5 {mu}m particle diameter cut off and runs for 24 hours every Sunday and Wednesday using one Gillman 25mm diameter stretched Teflon filter for each day. These filters are ideal targets for ion beam analysis work. Currently ANSTO receives 300 filters per month from this network for analysis using its accelerator based ion beam techniques on the 3 MV Van de Graaff accelerator. One week a month of accelerator time is dedicated to this analysis. Four simultaneous accelerator based IBA techniques are used at ANSTO, to analyse for the following 24 elements: H, C, N, O, F, Na, Al, Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Cu, Ni, Co, Zn, Br and Pb. The IBA techniques were proved invaluable in identifying sources of fine particles and their spatial and seasonal variations accross the large area sampled by the ASP network. 3 figs.

  12. Applying a Splitting Technique to Estimate Electrical Grid Reliability

    OpenAIRE

    Wadman, Wander; Crommelin, Daan; Frank, Jason; Pasupathy, R.; Kim, S.-H.; Tolk, A.; Hill, R; Kuhl, M.E.

    2013-01-01

    As intermittent renewable energy penetrates electrical power grids more and more, assessing grid reliability is of increasing concern for grid operators. Monte Carlo simulation is a robust and popular technique to estimate indices for grid reliability, but the involved computational intensity may be too high for typical reliability analyses. We show that various reliability indices can be expressed as expectations depending on the rare event probability of a so-called power curtailment, and e...

  13. Technology Assessment of Dust Suppression Techniques Applied During Structural Demolition

    Energy Technology Data Exchange (ETDEWEB)

    Boudreaux, J.F.; Ebadian, M.A.; Williams, P.T.; Dua, S.K.

    1998-10-20

    Hanford, Fernald, Savannah River, and other sites are currently reviewing technologies that can be implemented to demolish buildings in a cost-effective manner. In order to demolish a structure properly and, at the same time, minimize the amount of dust generated from a given technology, an evaluation must be conducted to choose the most appropriate dust suppression technology given site-specific conditions. Thus, the purpose of this research, which was carried out at the Hemispheric Center for Environmental Technology (HCET) at Florida International University, was to conduct an experimental study of dust aerosol abatement (dust suppression) methods as applied to nuclear D and D. This experimental study targeted the problem of dust suppression during the demolition of nuclear facilities. The resulting data were employed to assist in the development of mathematical correlations that can be applied to predict dust generation during structural demolition.

  14. Unconventional Coding Technique Applied to Multi-Level Polarization Modulation

    Science.gov (United States)

    Rutigliano, G. G.; Betti, S.; Perrone, P.

    2016-05-01

    A new technique is proposed to improve information confidentiality in optical-fiber communications without bandwidth consumption. A pseudorandom vectorial sequence was generated by a dynamic system algorithm and used to codify a multi-level polarization modulation based on the Stokes vector. Optical-fiber birefringence, usually considered as a disturbance, was exploited to obfuscate the signal transmission. At the receiver end, the same pseudorandom sequence was generated and used to decode the multi-level polarization modulated signal. The proposed scheme, working at the physical layer, provides strong information security without introducing complex processing and thus latency.

  15. Image analysis technique applied to lock-exchange gravity currents

    OpenAIRE

    Nogueira, Helena; Adduce, Claudia; Alves, Elsa; Franca, Rodrigues Pereira Da; Jorge, Mario

    2013-01-01

    An image analysis technique is used to estimate the two-dimensional instantaneous density field of unsteady gravity currents produced by full-depth lock-release of saline water. An experiment reproducing a gravity current was performed in a 3.0 m long, 0.20 m wide and 0.30 m deep Perspex flume with horizontal smooth bed and recorded with a 25 Hz CCD video camera under controlled light conditions. Using dye concentration as a tracer, a calibration procedure was established for each pixel in th...

  16. Applying Supervised Opinion Mining Techniques on Online User Reviews

    Directory of Open Access Journals (Sweden)

    Ion SMEUREANU

    2012-01-01

    Full Text Available In recent years, the spectacular development of web technologies, lead to an enormous quantity of user generated information in online systems. This large amount of information on web platforms make them viable for use as data sources, in applications based on opinion mining and sentiment analysis. The paper proposes an algorithm for detecting sentiments on movie user reviews, based on naive Bayes classifier. We make an analysis of the opinion mining domain, techniques used in sentiment analysis and its applicability. We implemented the proposed algorithm and we tested its performance, and suggested directions of development.

  17. A contribution from fundamental and applied technetium chemistry to the nuclear waste disposal safety case

    Energy Technology Data Exchange (ETDEWEB)

    Totskiy, Yury; Yalcintas, Ezgi; Huber, Florian; Gaona, Xavier; Schaefer, Thorsten; Altmaier, Marcus; Geckeis, Horst [Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen (Germany). Inst. for Nuclear Waste Disposal; Kalmykov, Stepan [Lomonosov Moscow State Univ. (Russian Federation)

    2015-07-01

    concentrated solutions over the entire pH range. Complete and improved chemical, thermodynamic and activity (SIT, Pitzer) models were derived. The second part of this work focuses on applied Tc chemistry in near-natural systems. Interaction of Tc(VII) with crystalline rock material from a prospective repository site (Nizhnekansky massif, Russia) and from an underground research laboratory (AespoeHRL, Sweden) were studied. Drilling of the Aespoecores were performed under anoxic conditions. Part of the material was artificially oxidized to test the importance of sample preservation. Batch sorption studies under variation of the Tc(VII) concentration were performed in synthetic groundwater simulate to estimate the retention kinetics and R{sub s} values. For better understanding of the retention mechanisms, advanced surface sensitive analytics (XPS, XANES) were carried out and the data compared to reference systems. Tc migration behavior was further investigated by injections of Tc(VII)-containing groundwater simulant into the natural fracture in the unoxidized Aespoediorite core. The data obtained are compared with the results of batch sorption studies and will be used for subsequent geochemical reactive transport modeling. This work highlights the importance of combining fundamental Tc chemistry and applied studies in order to derive a comprehensive assessment of Tc mobilization and retention processes in support of the nuclear waste disposal Safety Case.

  18. A contribution from fundamental and applied technetium chemistry to the nuclear waste disposal safety case

    International Nuclear Information System (INIS)

    . Complete and improved chemical, thermodynamic and activity (SIT, Pitzer) models were derived. The second part of this work focuses on applied Tc chemistry in near-natural systems. Interaction of Tc(VII) with crystalline rock material from a prospective repository site (Nizhnekansky massif, Russia) and from an underground research laboratory (AespoeHRL, Sweden) were studied. Drilling of the Aespoecores were performed under anoxic conditions. Part of the material was artificially oxidized to test the importance of sample preservation. Batch sorption studies under variation of the Tc(VII) concentration were performed in synthetic groundwater simulate to estimate the retention kinetics and Rs values. For better understanding of the retention mechanisms, advanced surface sensitive analytics (XPS, XANES) were carried out and the data compared to reference systems. Tc migration behavior was further investigated by injections of Tc(VII)-containing groundwater simulant into the natural fracture in the unoxidized Aespoediorite core. The data obtained are compared with the results of batch sorption studies and will be used for subsequent geochemical reactive transport modeling. This work highlights the importance of combining fundamental Tc chemistry and applied studies in order to derive a comprehensive assessment of Tc mobilization and retention processes in support of the nuclear waste disposal Safety Case.

  19. Neutrongraphy technique applied to the narcotics and terrorism enforcement

    International Nuclear Information System (INIS)

    Among the several methods of non-destructive essays that may be used for the detection of both drugs and explosives, the ones that utilize nuclear techniques have demonstrated to possess essential qualities for an efficient detection system. These techniques allow the inspection of a large quantity of samples fast, sensibly, specifically and with automatic decision, for they utilize radiation of great power of penetration. This work aims to show the neutron radiography and computed tomography potentiality for the detection of the drugs and explosives even when they are concealed by heavy materials. In the radiographic essays with thermal neutrons, samples of powder cocaine and explosives were inspected, concealed by several materials or not. The samples were irradiated during 30 minutes in the J-9 channel of the Argonauta research reactor of the IEN/CNEN in a neutron flux of 2:5 105 n/cm2.s. We used two sheets of gadolinium converter with a thickness of 25 μm each one and a Kodak Industrex A5 photographic plaque. A comparative analysis among the tomographic images experimental and simulated obtained by X-ray, fast and thermal neutron is presented. The thermal neutron tomography demonstrate to be the best. (author)

  20. Surgical treatment of scoliosis: a review of techniques currently applied

    Directory of Open Access Journals (Sweden)

    Maruyama Toru

    2008-04-01

    Full Text Available Abstract In this review, basic knowledge and recent innovation of surgical treatment for scoliosis will be described. Surgical treatment for scoliosis is indicated, in general, for the curve exceeding 45 or 50 degrees by the Cobb's method on the ground that: 1 Curves larger than 50 degrees progress even after skeletal maturity. 2 Curves of greater magnitude cause loss of pulmonary function, and much larger curves cause respiratory failure. 3 Larger the curve progress, more difficult to treat with surgery. Posterior fusion with instrumentation has been a standard of the surgical treatment for scoliosis. In modern instrumentation systems, more anchors are used to connect the rod and the spine, resulting in better correction and less frequent implant failures. Segmental pedicle screw constructs or hybrid constructs using pedicle screws, hooks, and wires are the trend of today. Anterior instrumentation surgery had been a choice of treatment for the thoracolumbar and lumbar scoliosis because better correction can be obtained with shorter fusion levels. Recently, superiority of anterior surgery for the thoracolumbar and lumbar scoliosis has been lost. Initial enthusiasm for anterior instrumentation for the thoracic curve using video assisted thoracoscopic surgery technique has faded out. Various attempts are being made with use of fusionless surgery. To control growth, epiphysiodesis on the convex side of the deformity with or without instrumentation is a technique to provide gradual progressive correction and to arrest the deterioration of the curves. To avoid fusion for skeletally immature children with spinal cord injury or myelodysplasia, vertebral wedge ostetomies are performed for the treatment of progressive paralytic scoliosis. For right thoracic curve with idiopathic scoliosis, multiple vertebral wedge osteotomies without fusion are performed. To provide correction and maintain it during the growing years while allowing spinal growth for

  1. Signal Processing Techniques Applied in RFI Mitigation of Radio Astronomy

    Directory of Open Access Journals (Sweden)

    Sixiu Wang

    2012-08-01

    Full Text Available Radio broadcast and telecommunications are present at different power levels everywhere on Earth. Radio Frequency Interference (RFI substantially limits the sensitivity of existing radio telescopes in several frequency bands and may prove to be an even greater obstacle for next generation of telescopes (or arrays to overcome. A variety of RFI detection and mitigation techniques have been developed in recent years. This study describes various signal process methods of RFI mitigation in radio astronomy, choose the method of Time-frequency domain cancellation to eliminate certain interference and effectively improve the signal to noise ratio in pulsar observations. Finally, RFI mitigation researches and implements in China radio astronomy will be also presented.

  2. Discrete filtering techniques applied to sequential GPS range measurements

    Science.gov (United States)

    Vangraas, Frank

    1987-01-01

    The basic navigation solution is described for position and velocity based on range and delta range (Doppler) measurements from NAVSTAR Global Positioning System satellites. The application of discrete filtering techniques is examined to reduce the white noise distortions on the sequential range measurements. A second order (position and velocity states) Kalman filter is implemented to obtain smoothed estimates of range by filtering the dynamics of the signal from each satellite separately. Test results using a simulated GPS receiver show a steady-state noise reduction, the input noise variance divided by the output noise variance, of a factor of four. Recommendations for further noise reduction based on higher order Kalman filters or additional delta range measurements are included.

  3. Applying Business Process Mode ling Techniques : Case Study

    Directory of Open Access Journals (Sweden)

    Bartosz Marcinkowski

    2010-12-01

    Full Text Available Selection and proper application of business process modeling methods and techniques have a significant impact on organizational improvement capabilities as well as proper understanding of functionality of information systems that shall support activity of the organization. A number of business process modeling notations were implemented in practice in recent decades. Most significant of the notations include ARIS, Business Process Modeling Notation (OMG BPMN and several Unified Modeling Language (OMG UML extensions. In this paper, the assessment whether one of the most flexible and strictly standardized contempo-rary bus iness process modeling notations, i.e. Rational UML Profile for Business Modeling, enable business analysts to prepare business models that are all-embracing and understandable by all the stakeholders. After the introduction, me-thodology of res earch is discussed. The following section presents selected case study results. The paper is concluded with a summary

  4. Quantitative Portfolio Optimization Techniques Applied to the Brazilian Stock Market

    Directory of Open Access Journals (Sweden)

    André Alves Portela Santos

    2012-09-01

    Full Text Available In this paper we assess the out-of-sample performance of two alternative quantitative portfolio optimization techniques - mean-variance and minimum variance optimization – and compare their performance with respect to a naive 1/N (or equally-weighted portfolio and also to the market portfolio given by the Ibovespa. We focus on short selling-constrained portfolios and consider alternative estimators for the covariance matrices: sample covariance matrix, RiskMetrics, and three covariance estimators proposed by Ledoit and Wolf (2003, Ledoit and Wolf (2004a and Ledoit and Wolf (2004b. Taking into account alternative portfolio re-balancing frequencies, we compute out-of-sample performance statistics which indicate that the quantitative approaches delivered improved results in terms of lower portfolio volatility and better risk-adjusted returns. Moreover, the use of more sophisticated estimators for the covariance matrix generated optimal portfolios with lower turnover over time.

  5. A Robust Text Processing Technique Applied to Lexical Error Recovery

    CERN Document Server

    Ingels, P

    1999-01-01

    This thesis addresses automatic lexical error recovery and tokenization of corrupt text input. We propose a technique that can automatically correct misspellings, segmentation errors and real-word errors in a unified framework that uses both a model of language production and a model of the typing behavior, and which makes tokenization part of the recovery process. The typing process is modeled as a noisy channel where Hidden Markov Models are used to model the channel characteristics. Weak statistical language models are used to predict what sentences are likely to be transmitted through the channel. These components are held together in the Token Passing framework which provides the desired tight coupling between orthographic pattern matching and linguistic expectation. The system, CTR (Connected Text Recognition), has been tested on two corpora derived from two different applications, a natural language dialogue system and a transcription typing scenario. Experiments show that CTR can automatically correct...

  6. Applying Data Privacy Techniques on Tabular Data in Uganda

    CERN Document Server

    Mivule, Kato

    2011-01-01

    The growth of Information Technology(IT) in Africa has led to an increase in the utilization of communication networks for data transaction across the continent. A growing number of entities in the private sector, academia, and government, have deployed the Internet as a medium to transact in data, routinely posting statistical and non statistical data online and thereby making many in Africa increasingly dependent on the Internet for data transactions. In the country of Uganda, exponential growth in data transaction has presented a new challenge: What is the most efficient way to implement data privacy. This article discusses data privacy challenges faced by the country of Uganda and implementation of data privacy techniques for published tabular data. We make the case for data privacy, survey concepts of data privacy, and implementations that could be employed to provide data privacy in Uganda.

  7. Free Radical Imaging Techniques Applied to Hydrocarbon Flames Diagnosis

    Institute of Scientific and Technical Information of China (English)

    A. Caldeira-Pires

    2001-01-01

    This paper evaluates the utilization of free radical chemiluminescence imaging and tomographic reconstruction techniques to assess advanced information on reacting flows. Two different laboratory flow configurations were analyzed, including unconfined non-premixed jet flame measurements to evaluate flame fuel/air mixing patterns at the burner-port of a typical glass-furnace burner. The second case characterized the reaction zone of premixed flames within gas turbine combustion chambers, based on a laboratory scale model of a lean prevaporized premixed (LPP) combustion chamber.The analysis shows that advanced imaging diagnosis can provide new information on the characterization of flame mixing and reacting phenomena. The utilization of local C2 and CH chemiluminescence can assess useful information on the quality of the combustion process, which can be used to improve the design of practical combustors.

  8. Innovative Visualization Techniques applied to a Flood Scenario

    Science.gov (United States)

    Falcão, António; Ho, Quan; Lopes, Pedro; Malamud, Bruce D.; Ribeiro, Rita; Jern, Mikael

    2013-04-01

    The large and ever-increasing amounts of multi-dimensional, time-varying and geospatial digital information from multiple sources represent a major challenge for today's analysts. We present a set of visualization techniques that can be used for the interactive analysis of geo-referenced and time sampled data sets, providing an integrated mechanism and that aids the user to collaboratively explore, present and communicate visually complex and dynamic data. Here we present these concepts in the context of a 4 hour flood scenario from Lisbon in 2010, with data that includes measures of water column (flood height) every 10 minutes at a 4.5 m x 4.5 m resolution, topography, building damage, building information, and online base maps. Techniques we use include web-based linked views, multiple charts, map layers and storytelling. We explain two of these in more detail that are not currently in common use for visualization of data: storytelling and web-based linked views. Visual storytelling is a method for providing a guided but interactive process of visualizing data, allowing more engaging data exploration through interactive web-enabled visualizations. Within storytelling, a snapshot mechanism helps the author of a story to highlight data views of particular interest and subsequently share or guide others within the data analysis process. This allows a particular person to select relevant attributes for a snapshot, such as highlighted regions for comparisons, time step, class values for colour legend, etc. and provide a snapshot of the current application state, which can then be provided as a hyperlink and recreated by someone else. Since data can be embedded within this snapshot, it is possible to interactively visualize and manipulate it. The second technique, web-based linked views, includes multiple windows which interactively respond to the user selections, so that when selecting an object and changing it one window, it will automatically update in all the other

  9. Object Detection Techniques Applied on Mobile Robot Semantic Navigation

    Directory of Open Access Journals (Sweden)

    Carlos Astua

    2014-04-01

    Full Text Available The future of robotics predicts that robots will integrate themselves more every day with human beings and their environments. To achieve this integration, robots need to acquire information about the environment and its objects. There is a big need for algorithms to provide robots with these sort of skills, from the location where objects are needed to accomplish a task up to where these objects are considered as information about the environment. This paper presents a way to provide mobile robots with the ability-skill to detect objets for semantic navigation. This paper aims to use current trends in robotics and at the same time, that can be exported to other platforms. Two methods to detect objects are proposed, contour detection and a descriptor based technique, and both of them are combined to overcome their respective limitations. Finally, the code is tested on a real robot, to prove its accuracy and efficiency.

  10. Object detection techniques applied on mobile robot semantic navigation.

    Science.gov (United States)

    Astua, Carlos; Barber, Ramon; Crespo, Jonathan; Jardon, Alberto

    2014-04-11

    The future of robotics predicts that robots will integrate themselves more every day with human beings and their environments. To achieve this integration, robots need to acquire information about the environment and its objects. There is a big need for algorithms to provide robots with these sort of skills, from the location where objects are needed to accomplish a task up to where these objects are considered as information about the environment. This paper presents a way to provide mobile robots with the ability-skill to detect objets for semantic navigation. This paper aims to use current trends in robotics and at the same time, that can be exported to other platforms. Two methods to detect objects are proposed, contour detection and a descriptor based technique, and both of them are combined to overcome their respective limitations. Finally, the code is tested on a real robot, to prove its accuracy and efficiency.

  11. Active Learning Techniques Applied to an Interdisciplinary Mineral Resources Course.

    Science.gov (United States)

    Aird, H. M.

    2015-12-01

    An interdisciplinary active learning course was introduced at the University of Puget Sound entitled 'Mineral Resources and the Environment'. Various formative assessment and active learning techniques that have been effective in other courses were adapted and implemented to improve student learning, increase retention and broaden knowledge and understanding of course material. This was an elective course targeted towards upper-level undergraduate geology and environmental majors. The course provided an introduction to the mineral resources industry, discussing geological, environmental, societal and economic aspects, legislation and the processes involved in exploration, extraction, processing, reclamation/remediation and recycling of products. Lectures and associated weekly labs were linked in subject matter; relevant readings from the recent scientific literature were assigned and discussed in the second lecture of the week. Peer-based learning was facilitated through weekly reading assignments with peer-led discussions and through group research projects, in addition to in-class exercises such as debates. Writing and research skills were developed through student groups designing, carrying out and reporting on their own semester-long research projects around the lasting effects of the historical Ruston Smelter on the biology and water systems of Tacoma. The writing of their mini grant proposals and final project reports was carried out in stages to allow for feedback before the deadline. Speakers from industry were invited to share their specialist knowledge as guest lecturers, and students were encouraged to interact with them, with a view to employment opportunities. Formative assessment techniques included jigsaw exercises, gallery walks, placemat surveys, think pair share and take-home point summaries. Summative assessment included discussion leadership, exams, homeworks, group projects, in-class exercises, field trips, and pre-discussion reading exercises

  12. Chemistry

    International Nuclear Information System (INIS)

    The chemical research and development efforts related to the design and ultimate operation of molten-salt breeder reactor systems are concentrated on fuel- and coolant-salt chemistry, including the development of analytical methods for use in these systems. The chemistry of tellurium in fuel salt is being studied to help elucidate the role of this element in the intergranular cracking of Hastelloy N. Studies were continued of the effect of oxygen-containing species on the equilibrium between dissolved UF3 and dissolved UF4, and, in some cases, between the dissolved uranium fluorides and graphite, and the UC2. Several aspects of coolant-salt chemistry are under investigation. Hydroxy and oxy compounds that could be formed in molten NaBF4 are being synthesized and characterized. Studies of the chemistry of chromium (III) compounds in fluoroborate melts were continued as part of a systematic investigation of the corrosion of structural alloys by coolant salt. An in-line voltammetric method for determining U4+/U3+ ratios in fuel salt was tested in a forced-convection loop over a six-month period. (LK)

  13. Technology Assessment of Dust Suppression Techniques applied During Structural Demolition

    Energy Technology Data Exchange (ETDEWEB)

    Boudreaux, J.F.; Ebadian, M.A.; Dua, S.K.

    1997-08-06

    Hanford, Fernald, Savannah River, and other sites are currently reviewing technologies that can be implemented to demolish buildings in a cost-effective manner. In order to demolish a structure and, at the same time, minimize the amount of dust generated by a given technology, an evaluation must be conducted to choose the most appropriate dust suppression technology. Thus, the purpose of this research, which was conducted by the Hemispheric Center for Environmental Technology (HCET) at Florida International University (FIU), was to perform an experimental study of dust aerosol abatement (dust suppression) methods as applied to nuclear D and D. This experimental study specifically targeted the problem of dust suppression during demolition. The resulting data were used in the development of mathematical correlations that can be applied to structural demolition. In the Fiscal Year 1996 (FY96), the effectiveness of different dust suppressing agents was investigated for different types of concrete blocks. Initial tests were conducted in a broad particle size range. In Fiscal Year 1997 (FY97), additional tests were performed in the size range in which most of the particles were detected. Since particle distribution is an important parameter for predicting deposition in various compartments of the human respiratory tract, various tests were aimed at determining the particle size distribution of the airborne dust particles. The effectiveness of dust suppressing agents for particles of various size was studied. Instead of conducting experiments on various types of blocks, it was thought prudent to carry out additional tests on blocks of the same type. Several refinements were also incorporated in the test procedures and data acquisition system used in FY96.

  14. Applying the Multilevel Framework of Discourse Comprehension to Evaluate the Text Characteristics of General Chemistry Textbooks

    Science.gov (United States)

    Pyburn, Daniel T.; Pazicni, Samuel

    2014-01-01

    Prior chemistry education research has demonstrated a relationship between student reading skill and general chemistry course performance. In addition to student characteristics, however, the qualities of the learning materials with which students interact also impact student learning. For example, low-knowledge students benefit from texts that…

  15. A REVIEW ON: A SIGNIFICANCE OF MICROWAVE ASSIST TECHNIQUE IN GREEN CHEMISTRY

    Directory of Open Access Journals (Sweden)

    Manoj S. Charde

    2012-05-01

    Full Text Available Microwave Assisted Synthesis is rapidly becoming the method of choice in modern synthesis and discovery chemistry laboratories. Microwave-assisted synthesis improves both throughput and turn-around time for chemists by offering the benefits of drastically reduced reaction times, increased yields, and purer products. In this type of synthesis we applying microwave irradiation to chemical reactions. The fundamental mechanism of microwave heating involves agitation of polar molecules or ions that oscillate under the effect of an oscillating electric or magnetic field. In the presence of an oscillating field, particles try to orient themselves or be in phase with the field. Only materials that absorb microwave radiation are relevant to microwave chemistry. These materials can be categorized according to the three main mechanisms of heating, namely. Dipolar polarization, Conduction mechanism, Interfacial polarization. Microwave chemistry apparatus are classified: Single-mode apparatus and Multi-mode apparatus. Although occasionally known by such acronyms as 'MEC' (Microwave-Enhanced Chemistry or ‘MORE’ synthesis (Microwave-organic Reaction Enhancement, these acronyms have had little acceptance outside a small number of groups. The ability to combine microwave technology with in-situ reaction monitoring as an analytical tools will offer opportunities for chemists to optimize the reaction conditions. Different compounds convert microwave radiation to heat by different amounts. This selectivity allows some parts of the object being heated to heat more quickly or more slowly than others (particularly the reaction vessel.

  16. Dust tracking techniques applied to the STARDUST facility: First results

    Energy Technology Data Exchange (ETDEWEB)

    Malizia, A., E-mail: malizia@ing.uniroma2.it [Associazione EURATOM-ENEA, Department of Industrial Engineering, University of Rome “Tor Vergata”, Via del Politecnico 1, 00133 Rome (Italy); Camplani, M. [Grupo de Tratamiento de Imágenes, E.T.S.I de Telecomunicación, Universidad Politécnica de Madrid (Spain); Gelfusa, M. [Associazione EURATOM-ENEA, Department of Industrial Engineering, University of Rome “Tor Vergata”, Via del Politecnico 1, 00133 Rome (Italy); Lupelli, I. [Associazione EURATOM-ENEA, Department of Industrial Engineering, University of Rome “Tor Vergata”, Via del Politecnico 1, 00133 Rome (Italy); EURATOM/CCFE Association, Culham Science Centre, Abingdon (United Kingdom); Richetta, M.; Antonelli, L.; Conetta, F.; Scarpellini, D.; Carestia, M.; Peluso, E.; Bellecci, C. [Associazione EURATOM-ENEA, Department of Industrial Engineering, University of Rome “Tor Vergata”, Via del Politecnico 1, 00133 Rome (Italy); Salgado, L. [Grupo de Tratamiento de Imágenes, E.T.S.I de Telecomunicación, Universidad Politécnica de Madrid (Spain); Video Processing and Understanding Laboratory, Universidad Autónoma de Madrid (Spain); Gaudio, P. [Associazione EURATOM-ENEA, Department of Industrial Engineering, University of Rome “Tor Vergata”, Via del Politecnico 1, 00133 Rome (Italy)

    2014-10-15

    Highlights: •Use of an experimental facility, STARDUST, to analyze the dust resuspension problem inside the tokamak in case of loss of vacuum accident. •PIV technique implementation to track the dust during a LOVA reproduction inside STARDUST. •Data imaging techniques to analyze dust velocity field: first results and data discussion. -- Abstract: An important issue related to future nuclear fusion reactors fueled with deuterium and tritium is the creation of large amounts of dust due to several mechanisms (disruptions, ELMs and VDEs). The dust size expected in nuclear fusion experiments (such as ITER) is in the order of microns (between 0.1 and 1000 μm). Almost the total amount of this dust remains in the vacuum vessel (VV). This radiological dust can re-suspend in case of LOVA (loss of vacuum accident) and these phenomena can cause explosions and serious damages to the health of the operators and to the integrity of the device. The authors have developed a facility, STARDUST, in order to reproduce the thermo fluid-dynamic conditions comparable to those expected inside the VV of the next generation of experiments such as ITER in case of LOVA. The dust used inside the STARDUST facility presents particle sizes and physical characteristics comparable with those that created inside the VV of nuclear fusion experiments. In this facility an experimental campaign has been conducted with the purpose of tracking the dust re-suspended at low pressurization rates (comparable to those expected in case of LOVA in ITER and suggested by the General Safety and Security Report ITER-GSSR) using a fast camera with a frame rate from 1000 to 10,000 images per second. The velocity fields of the mobilized dust are derived from the imaging of a two-dimensional slice of the flow illuminated by optically adapted laser beam. The aim of this work is to demonstrate the possibility of dust tracking by means of image processing with the objective of determining the velocity field values

  17. Optical Trapping Techniques Applied to the Study of Cell Membranes

    Science.gov (United States)

    Morss, Andrew J.

    Optical tweezers allow for manipulating micron-sized objects using pN level optical forces. In this work, we use an optical trapping setup to aid in three separate experiments, all related to the physics of the cellular membrane. In the first experiment, in conjunction with Brian Henslee, we use optical tweezers to allow for precise positioning and control of cells in suspension to evaluate the cell size dependence of electroporation. Theory predicts that all cells porate at a transmembrane potential VTMof roughly 1 V. The Schwann equation predicts that the transmembrane potential depends linearly on the cell radius r, thus predicting that cells should porate at threshold electric fields that go as 1/r. The threshold field required to induce poration is determined by applying a low voltage pulse to the cell and then applying additional pulses of greater and greater magnitude, checking for poration at each step using propidium iodide dye. We find that, contrary to expectations, cells do not porate at a constant value of the transmembrane potential but at a constant value of the electric field which we find to be 692 V/cm for K562 cells. Delivering precise dosages of nanoparticles into cells is of importance for assessing toxicity of nanoparticles or for genetic research. In the second experiment, we conduct nano-electroporation—a novel method of applying precise doses of transfection agents to cells—by using optical tweezers in conjunction with a confocal microscope to manipulate cells into contact with 100 nm wide nanochannels. This work was done in collaboration with Pouyan Boukany of Dr. Lee's group. The small cross sectional area of these nano channels means that the electric field within them is extremely large, 60 MV/m, which allows them to electrophoretically drive transfection agents into the cell. We find that nano electroporation results in excellent dose control (to within 10% in our experiments) compared to bulk electroporation. We also find that

  18. Computer Science Techniques Applied to Parallel Atomistic Simulation

    Science.gov (United States)

    Nakano, Aiichiro

    1998-03-01

    Recent developments in parallel processing technology and multiresolution numerical algorithms have established large-scale molecular dynamics (MD) simulations as a new research mode for studying materials phenomena such as fracture. However, this requires large system sizes and long simulated times. We have developed: i) Space-time multiresolution schemes; ii) fuzzy-clustering approach to hierarchical dynamics; iii) wavelet-based adaptive curvilinear-coordinate load balancing; iv) multilevel preconditioned conjugate gradient method; and v) spacefilling-curve-based data compression for parallel I/O. Using these techniques, million-atom parallel MD simulations are performed for the oxidation dynamics of nanocrystalline Al. The simulations take into account the effect of dynamic charge transfer between Al and O using the electronegativity equalization scheme. The resulting long-range Coulomb interaction is calculated efficiently with the fast multipole method. Results for temperature and charge distributions, residual stresses, bond lengths and bond angles, and diffusivities of Al and O will be presented. The oxidation of nanocrystalline Al is elucidated through immersive visualization in virtual environments. A unique dual-degree education program at Louisiana State University will also be discussed in which students can obtain a Ph.D. in Physics & Astronomy and a M.S. from the Department of Computer Science in five years. This program fosters interdisciplinary research activities for interfacing High Performance Computing and Communications with large-scale atomistic simulations of advanced materials. This work was supported by NSF (CAREER Program), ARO, PRF, and Louisiana LEQSF.

  19. Remote sensing techniques applied to seismic vulnerability assessment

    Science.gov (United States)

    Juan Arranz, Jose; Torres, Yolanda; Hahgi, Azade; Gaspar-Escribano, Jorge

    2016-04-01

    Advances in remote sensing and photogrammetry techniques have increased the degree of accuracy and resolution in the record of the earth's surface. This has expanded the range of possible applications of these data. In this research, we have used these data to document the construction characteristics of the urban environment of Lorca, Spain. An exposure database has been created with the gathered information to be used in seismic vulnerability assessment. To this end, we have used data from photogrammetric flights at different periods, using both orthorectified images in the visible and infrared spectrum. Furthermore, the analysis is completed using LiDAR data. From the combination of these data, it has been possible to delineate the building footprints and characterize the constructions with attributes such as the approximate date of construction, area, type of roof and even building materials. To carry out the calculation, we have developed different algorithms to compare images from different times, segment images, classify LiDAR data, and use the infrared data in order to remove vegetation or to compute roof surfaces with height value, tilt and spectral fingerprint. In addition, the accuracy of our results has been validated with ground truth data. Keywords: LiDAR, remote sensing, seismic vulnerability, Lorca

  20. Applying Website Usability Testing Techniques to Promote E-services

    Directory of Open Access Journals (Sweden)

    Abdel Nasser H. Zaied

    2015-09-01

    Full Text Available In this competitive world, websites are considered to be a key aspect of any organization’s competitiveness. In addition to visual esthetics, usability of a website is a strong determinant for user’s satisfaction and pleasure. However, lack of appropriate techniques and attributes for measuring usability may constrain the usefulness of a website. To address this issue, we conduct a statistical study to evaluate the usability levels of e-learning and e-training websites based on human (user perception. The questionnaire is implemented as user based tool, visitors of a website can use it to evaluate the usability of the websites. The results showed that according to the students’ point view the personalization has the first important criterion for the use of the e-learning websites, while according to experts’ point view the accessibility has the first important criterion for the use of the e-learning websites. Also the result indicated that the experienced respondents have demonstrated satisfaction over the usability attributes of e-learning websites they accessed for their learning purposes; while inexperienced students have expressed their perception on the importance of the usability attributes for accessing e-learning websites. When combining and comparing both finings, based on the outcomes it is evident that, all the attributes yielded satisfaction and were felt important.

  1. Digital prototyping technique applied for redesigning plastic products

    Science.gov (United States)

    Pop, A.; Andrei, A.

    2015-11-01

    After products are on the market for some time, they often need to be redesigned to meet new market requirements. New products are generally derived from similar but outdated products. Redesigning a product is an important part of the production and development process. The purpose of this paper is to show that using modern technology, like Digital Prototyping in industry is an effective way to produce new products. This paper tries to demonstrate and highlight the effectiveness of the concept of Digital Prototyping, both to reduce the design time of a new product, but also the costs required for implementing this step. The results of this paper show that using Digital Prototyping techniques in designing a new product from an existing one available on the market mould offers a significantly manufacturing time and cost reduction. The ability to simulate and test a new product with modern CAD-CAM programs in all aspects of production (designing of the 3D model, simulation of the structural resistance, analysis of the injection process and beautification) offers a helpful tool for engineers. The whole process can be realised by one skilled engineer very fast and effective.

  2. Sterile insect technique applied to Queensland fruit fly

    International Nuclear Information System (INIS)

    The Sterile Insect Technique (SIT) aims to suppress or eradicate pest populations by flooding wild populations with sterile males. To control fruit fly million of flies of both sexes are mass reared at the Gosford Post-Harvest laboratory near Sydney, mixed with sawdust and fluorescent dye at the pupal stage and transported to Ansto where they are exposed to low dose of 70-75Gy of gamma radiation from a Cobalt-60 source. Following irradiation the pupae are transported to the release site in plastic sleeves then transferred to large plastic garbage bins for hatching. These bins are held at 30 deg. C. to synchronise hatching and files are released 48-72 hours after hatching begins. In most cases these bins are placed among fruit trees in the form of an 800 metre grid. This maximises survival of the emerging flies which are released on an almost daily basis. Progress of the SIT program is monitored by collecting flies from traps dotted all over the infested site. The ratio of sterile to wild flies can be detected because the sterile files are coated with the fluorescent dust which can be seen under ultra-violet light. If the SIT program is successful entomologists will trap a high proportion of sterile flies to wild flies and this should result in a clear reduction in maggot infestations. Surveillance, quarantine, and trapping activities continue for 8 or 9 months to check for any surviving pockets of infestation. If any are found the SIT program is reactivated. These programs demonstrated that SIT was an efficient and environmental friendly non-chemical control method for eradicating outbreaks or suppressing fruit fly populations in important fruit growing areas. ills

  3. Semantic Data And Visualization Techniques Applied To Geologic Field Mapping

    Science.gov (United States)

    Houser, P. I. Q.; Royo-Leon, M.; Munoz, R.; Estrada, E.; Villanueva-Rosales, N.; Pennington, D. D.

    2015-12-01

    Geologic field mapping involves the use of technology before, during, and after visiting a site. Geologists utilize hardware such as Global Positioning Systems (GPS) connected to mobile computing platforms such as tablets that include software such as ESRI's ArcPad and other software to produce maps and figures for a final analysis and report. Hand written field notes contain important information and drawings or sketches of specific areas within the field study. Our goal is to collect and geo-tag final and raw field data into a cyber-infrastructure environment with an ontology that allows for large data processing, visualization, sharing, and searching, aiding in connecting field research with prior research in the same area and/or aid with experiment replication. Online searches of a specific field area return results such as weather data from NOAA and QuakeML seismic data from USGS. These results that can then be saved to a field mobile device and searched while in the field where there is no Internet connection. To accomplish this we created the GeoField ontology service using the Web Ontology Language (OWL) and Protégé software. Advanced queries on the dataset can be made using reasoning capabilities can be supported that go beyond a standard database service. These improvements include the automated discovery of data relevant to a specific field site and visualization techniques aimed at enhancing analysis and collaboration while in the field by draping data over mobile views of the site using augmented reality. A case study is being performed at University of Texas at El Paso's Indio Mountains Research Station located near Van Horn, Texas, an active multi-disciplinary field study site. The user can interactively move the camera around the study site and view their data digitally. Geologist's can check their data against the site in real-time and improve collaboration with another person as both parties have the same interactive view of the data.

  4. Applying perceptual and adaptive learning techniques for teaching introductory histopathology

    Directory of Open Access Journals (Sweden)

    Sally Krasne

    2013-01-01

    Full Text Available Background: Medical students are expected to master the ability to interpret histopathologic images, a difficult and time-consuming process. A major problem is the issue of transferring information learned from one example of a particular pathology to a new example. Recent advances in cognitive science have identified new approaches to address this problem. Methods: We adapted a new approach for enhancing pattern recognition of basic pathologic processes in skin histopathology images that utilizes perceptual learning techniques, allowing learners to see relevant structure in novel cases along with adaptive learning algorithms that space and sequence different categories (e.g. diagnoses that appear during a learning session based on each learner′s accuracy and response time (RT. We developed a perceptual and adaptive learning module (PALM that utilized 261 unique images of cell injury, inflammation, neoplasia, or normal histology at low and high magnification. Accuracy and RT were tracked and integrated into a "Score" that reflected students rapid recognition of the pathologies and pre- and post-tests were given to assess the effectiveness. Results: Accuracy, RT and Scores significantly improved from the pre- to post-test with Scores showing much greater improvement than accuracy alone. Delayed post-tests with previously unseen cases, given after 6-7 weeks, showed a decline in accuracy relative to the post-test for 1 st -year students, but not significantly so for 2 nd -year students. However, the delayed post-test scores maintained a significant and large improvement relative to those of the pre-test for both 1 st and 2 nd year students suggesting good retention of pattern recognition. Student evaluations were very favorable. Conclusion: A web-based learning module based on the principles of cognitive science showed an evidence for improved recognition of histopathology patterns by medical students.

  5. Effectiveness of Student-Generated Video as a Teaching Tool for an Instrumental Technique in the Organic Chemistry Laboratory

    Science.gov (United States)

    Jordan, Jeremy T.; Box, Melinda C.; Eguren, Kristen E.; Parker, Thomas A.; Saraldi-Gallardo, Victoria M.; Wolfe, Michael I.; Gallardo-Williams, Maria T.

    2016-01-01

    Multimedia instruction has been shown to serve as an effective learning aid for chemistry students. In this study, the viability of student-generated video instruction for organic chemistry laboratory techniques and procedure was examined and its effectiveness compared to instruction provided by a teaching assistant (TA) was evaluated. After…

  6. Chemistry

    International Nuclear Information System (INIS)

    Research progress is reported in programs on fuel-salt chemistry, properties of compounds in the Li--Te system, Te spectroscopy UF4--H equilibria, porous electrode studies of molten salts, fuel salt-coolant salt reactions, thermodynamic properties of transition-metal fluorides, and properties of sodium fluoroborate. Developmental work on analytical methods is summarized including in-line analysis of molten MSBR fuel, analysis of coolant-salts for tritium, analysis of molten LiF--BeF2--ThF4 for Fe and analysis of LiF--BeF--ThF4 for Te

  7. Recent developments of surface complexation models applied to environmental aquatic chemistry

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Based on numerous latest references, the current developments in surface complexation, surface precipitation and the corresponding models (SCMs and SPMs), were reviewed. The contents involved comparison on surface charge composition and layer-structure of solid-solution interface for the classical 1-pK and 2- pK models, In addition, the fundamental concept and relations of the new models, i.e., multi-site complexation (MUSIC) and charge -distribution (CD) MUSIC models were described as well. To avoid misuse or abuse, it must be emphasized that the applicability nd limitation for each model should be considered carefully when selecting the concerned model(s). In addition, some new powerful techniques for surface characterization and analysis applied to model establishment and modification were also briefly introduced.

  8. Comprehensive Mechanisms for Combustion Chemistry: An Experimental and Numerical Study with Emphasis on Applied Sensitivity Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Dryer, Frederick L.

    2009-04-10

    This project was an integrated experimental/numerical effort to study pyrolysis and oxidation reactions and mechanisms for small-molecule hydrocarbon structures under conditions representative of combustion environments. The experimental aspects of the work were conducted in large-diameter flow reactors, at 0.3 to 18 atm pressure, 500 to 1100 K temperature, and 10-2 to 2 seconds reaction time. Experiments were also conducted to determine reference laminar flame speeds using a premixed laminar stagnation flame experiment and particle image velocimetry, as well as pressurized bomb experiments. Flow reactor data for oxidation experiments include: (1)adiabatic/isothermal species time-histories of a reaction under fixed initial pressure, temperature, and composition; to determine the species present after a fixed reaction time, initial pressure; (2)species distributions with varying initial reaction temperature; (3)perturbations of a well-defined reaction systems (e.g. CO/H2/O2 or H2/O2)by the addition of small amounts of an additive species. Radical scavenging techniques are applied to determine unimolecular decomposition rates from pyrolysis experiments. Laminar flame speed measurements are determined as a function of equivalence ratio, dilution, and unburned gas temperature at 1 atm pressure. Hierarchical, comprehensive mechanistic construction methods were applied to develop detailed kinetic mechanisms which describe the measurements and literature kinetic data. Modeling using well-defined and validated mechanisms for the CO/H2/Oxidant systems and perturbations of oxidation experiments by small amounts of additives were also used to derive absolute reaction rates and to investigate the compatibility of published elementary kinetic and thermochemical information. Numerical tools were developed and applied to assess the importance of individual elementary reactions to the predictive performance of the

  9. Gender Differences in the Use of Hedges And First Person Pronouns in Research Articles of Applied Linguistics and Chemistry

    Directory of Open Access Journals (Sweden)

    Fatemeh Mirzapour

    2016-11-01

    Full Text Available Differences in the way that males and females use language have been of interest in the study of discourse. This study is an attempt to examine whether men and women differ with respect to the use of hedges and first person pronouns in research articles of two disciplines of Applied Linguistics and Chemistry. Based on a corpus of sixty research articles, the overall  categorical distribution of hedging devices and first person pronouns were calculated in research articles. The results indicate that hedges and first person plural pronouns are used in Applied Linguistics articles more frequently than Chemistry articles. Moreover, females use hedges more than males in both disciplines but males use first person plural pronoun more than females in both disciplines. These findings may have some implications for the teaching of academic writing to EFL students.              Keywords: Gender, Hedges, Person Pronoun, Research Articles

  10. Chemistry of Metal-organic Frameworks Monitored by Advanced X-ray Diffraction and Scattering Techniques.

    Science.gov (United States)

    Mazaj, Matjaž; Kaučič, Venčeslav; Zabukovec Logar, Nataša

    2016-01-01

    The research on metal-organic frameworks (MOFs) experienced rapid progress in recent years due to their structure diversity and wide range of application opportunities. Continuous progress of X-ray and neutron diffraction methods enables more and more detailed insight into MOF's structural features and significantly contributes to the understanding of their chemistry. Improved instrumentation and data processing in high-resolution X-ray diffraction methods enables the determination of new complex MOF crystal structures in powdered form. By the use of neutron diffraction techniques, a lot of knowledge about the interaction of guest molecules with crystalline framework has been gained in the past few years. Moreover, in-situ time-resolved studies by various diffraction and scattering techniques provided comprehensive information about crystallization kinetics, crystal growth mechanism and structural dynamics triggered by external physical or chemical stimuli. The review emphasizes most relevant advanced structural studies of MOFs based on powder X-ray and neutron scattering. PMID:27640372

  11. Chemistry of Metal-organic Frameworks Monitored by Advanced X-ray Diffraction and Scattering Techniques.

    Science.gov (United States)

    Mazaj, Matjaž; Kaučič, Venčeslav; Zabukovec Logar, Nataša

    2016-01-01

    The research on metal-organic frameworks (MOFs) experienced rapid progress in recent years due to their structure diversity and wide range of application opportunities. Continuous progress of X-ray and neutron diffraction methods enables more and more detailed insight into MOF's structural features and significantly contributes to the understanding of their chemistry. Improved instrumentation and data processing in high-resolution X-ray diffraction methods enables the determination of new complex MOF crystal structures in powdered form. By the use of neutron diffraction techniques, a lot of knowledge about the interaction of guest molecules with crystalline framework has been gained in the past few years. Moreover, in-situ time-resolved studies by various diffraction and scattering techniques provided comprehensive information about crystallization kinetics, crystal growth mechanism and structural dynamics triggered by external physical or chemical stimuli. The review emphasizes most relevant advanced structural studies of MOFs based on powder X-ray and neutron scattering.

  12. Applying Modeling Instruction to High School Chemistry to Improve Students' Conceptual Understanding

    Science.gov (United States)

    Dukerich, Larry

    2015-01-01

    With the release of the Next Generation Science Standards, high school chemistry teachers are now pondering the implications of their recommendations for their teaching. They may agree that traditional instruction, as the Framework points out, "emphasizes discrete facts with a focus on breadth over depth, and does not provide students with…

  13. Teaching Reform of Applied Chemistry Experiment%应用化学实验教学改革

    Institute of Scientific and Technical Information of China (English)

    马学林; 杨威

    2015-01-01

    “应用化学实验”是高等院校应用化学专业学生必修课程之一,也是高校为化工企业输出应用型人才的地方。结合包头化工产业的发展,我校加大对应用化学实验课程教学内容改革,通过应用化学实验教学改革,实现企业、学校与学生三者共赢的局面,并收到显著成效。%Applied Chemistry Experiment "is the basis for compulsory courses to Normal College in Chemis-try, And is a place which provided application -oriented talents to chemical companies .According to the develop-ment of chemical industry in Baotou , The teaching reform of applied chemistry experiment was increased .The win-win situation of companys , colleges and students was realized through the teaching reform .

  14. Ruthenium Vinylidene and Acetylide Complexes. An Advanced Undergraduate Multi-technique Inorganic/Organometallic Chemistry Experiment

    Science.gov (United States)

    McDonagh, Andrew M.; Deeble, Geoffrey J.; Hurst, Steph; Cifuentes, Marie P.; Humphrey, Mark G.

    2001-02-01

    This experiment describes the isolation and characterization of complexes containing examples of two important monohapto ligands, namely vinylidene (C=CHR) and alkynyl (C ? CR) ligands. The former is a tautomer of acetylene that has minimal (10-10 s) existence as an uncomplexed molecule, providing an interesting example of the stabilization of reactive organic species at transition metals--an important motif in organometallic chemistry. The latter ligand affords complexes that have attracted a great deal of interest recently for their potentially useful electronic or optical properties, illustrating a major focus of contemporary organometallic chemistry, the search for useful materials. The particular strength of this experiment is in demonstrating the utility of a range of spectroscopic and analytical techniques in inorganic complex identification. The students observe unusual chemical shifts in the 13C NMR (vinylidene metal-bound carbon), meet heteronuclear NMR (31P), assign intense metal-to-ligand charge transfer (MLCT) bands in the UV-visible spectra, observe the utility of mass spectra in characterizing complexes of poly-isotopic transition metals, and are introduced to redox potentials (cyclic voltammetry).

  15. Near Infrared Spectroscopy Calibration for Wood Chemistry: Which Chemometric Technique Is Best for Prediction and Interpretation?

    Directory of Open Access Journals (Sweden)

    Brian K. Via

    2014-07-01

    Full Text Available This paper addresses the precision in factor loadings during partial least squares (PLS and principal components regression (PCR of wood chemistry content from near infrared reflectance (NIR spectra. The precision of the loadings is considered important because these estimates are often utilized to interpret chemometric models or selection of meaningful wavenumbers. Standard laboratory chemistry methods were employed on a mixed genus/species hardwood sample set. PLS and PCR, before and after 1st derivative pretreatment, was utilized for model building and loadings investigation. As demonstrated by others, PLS was found to provide better predictive diagnostics. However, PCR exhibited a more precise estimate of loading peaks which makes PCR better for interpretation. Application of the 1st derivative appeared to assist in improving both PCR and PLS loading precision, but due to the small sample size, the two chemometric methods could not be compared statistically. This work is important because to date most research works have committed to PLS because it yields better predictive performance. But this research suggests there is a tradeoff between better prediction and model interpretation. Future work is needed to compare PLS and PCR for a suite of spectral pretreatment techniques.

  16. Applying Analytical Derivative and Sparse Matrix Techniques to Large-Scale Process Optimization Problems

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The performance of analytical derivative and sparse matrix techniques applied to a traditional densesequential quadratic programming(SQP) is studied, and the strategy utilizing those techniques is also presented. Computational results on two typicalchemical optimization problems demonstrate significant enhancement in efficiency, which shows this strategy ispromising and suitable for large-scale process optimization problems.

  17. Applying Analytical Derivative and Sparse Matrix Techniques to Large-Scale Process Optimization Problems

    Institute of Scientific and Technical Information of China (English)

    钟卫涛; 邵之江; 张余岳; 钱积新

    2000-01-01

    The performance of analytical derivative and sparse matrix techniques applied to a traditional dense sequential quadratic programming (SQP) is studied, and the strategy utilizing those techniques is also presented.Computational results on two typical chemical optimization problems demonstrate significant enhancement in efficiency, which shows this strategy is promising and suitable for large-scale process optimization problems.

  18. Applying BI Techniques To Improve Decision Making And Provide Knowledge Based Management

    Directory of Open Access Journals (Sweden)

    Alexandra Maria Ioana FLOREA

    2015-07-01

    Full Text Available The paper focuses on BI techniques and especially data mining algorithms that can support and improve the decision making process, with applications within the financial sector. We consider the data mining techniques to be more efficient and thus we applied several techniques, supervised and unsupervised learning algorithms The case study in which these algorithms have been implemented regards the activity of a banking institution, with focus on the management of lending activities.

  19. Research on key techniques of virtual reality applied in mining industry

    Institute of Scientific and Technical Information of China (English)

    LIAO Jun; LU Guo-bin

    2009-01-01

    Based on the applications of virtual reality technology in many fields, introduced the virtual reality technical basic concept, structure type, related technique development, etc., tallied up applications of virtual reality technique in the present mining industry, inquired into core techniques related software and hardware, especially the optimization in the setup of various 3D models technique, and carried out a virtual scene to travel extensively in real-time by stereoscopic manifestation technique and so on. Then it brought forward the solution of virtual reality technique with software and hardware to the mining industry that can satisfy the demand of different aspects and levers. Finally, it show a fine prospect of virtual reality technique applied in the mining industry.

  20. THE SIXTH FRENCH-ROMANIAN SYMPOSIUM OF APPLIED CHEMISTRY “COFrRoCA 2010” 07 – 10 JULY 2010 – ORLEANS, FRANCE

    OpenAIRE

    Irina-Claudia Alexa

    2011-01-01

    The Sixth French-Romanian Symposium of Applied Chemistry "COlloque FRanco-ROumain de Chimie Appliquée" – COFrRoCA 2010, organized by the Research Center “Applied Chemistry and Process Engineering” of the "Vasile Alecsandri" University from Bacău (Romania) and the Institute of Organic and Analytical Chemistry, University of Orleans (France), took place on 7-10 July, 2010 in Orleans. Over 140 posters, 46 oral communications, 4 conferences and two keynote lectures were presented plenary or in o...

  1. Technetium chemistry in the fuel cycle: combining basic and applied studies.

    Science.gov (United States)

    Poineau, Frederic; Mausolf, Edward; Jarvinen, Gordon D; Sattelberger, Alfred P; Czerwinski, Kenneth R

    2013-04-01

    Technetium is intimately linked with nuclear reactions. The ultraminute natural levels in the environment are due to the spontaneous fission of uranium isotopes. The discovery of technetium was born from accelerator reactions, and its use and presence in the modern world are directly due to nuclear reactors. While occupying a central location in the periodic table, the chemistry of technetium is poorly explored, especially when compared to its neighboring elements, i.e., molybdenum, ruthenium, and rhenium. This state of affairs, which is tied to the small number of laboratories equipped to work with the long-lived (99)Tc isotope, provides a remarkable opportunity to combine basic studies with applications for the nuclear fuel cycle. An example is given through examination of the technetium halide compounds. Binary metal halides represent some of the most fundamental of inorganic compounds. The synthesis of new technetium halides demonstrates trends with structure, coordination number, and speciation that can be utilized in the nuclear fuel cycle. Examples are provided for technetium-zirconium alloys as waste forms and the formation of reduced technetium species in separations.

  2. UV-VIS Spectroscopy Applied to Stratospheric Chemistry, Methods and Results

    Energy Technology Data Exchange (ETDEWEB)

    Karlsen, K.

    1996-03-01

    This paper was read at the workshop ``The Norwegian Climate and Ozone Research Programme`` held on 11-12 March 1996. Numerous observations and modeling have shown with a very high degree of certainty that the man-made emissions of chlorofluorocarbons (CFC) and halons are responsible for the Antarctica ozone hole. It is also evident that the ozone layer of the Northern Hemisphere has suffered a certain decline over the last 10-15 years, possibly because of CFC and halons. 20-30% of the observed reduction is ascribed to coupled chlorine and bromine chemistry via a catalytic cycle resulting in the net conversion of 2O{sub 3} to 3O{sub 2}. But the details are not fully understood. The author plans to assemble a UV-VIS spectrometer for measuring the species OClO and BrO and to compare and discuss measured diurnal variations of OClO and BrO with model calculations. The use of Differential Optical Absorption Spectroscopy (DOAS) is discussed and some results from late 1995 presented. 6 refs., 2 figs.

  3. Data Mining E-protokol - Applying data mining techniques on student absence

    OpenAIRE

    Shrestha, Amardip; Bro Lilleås, Lauge; Hansen, Asbjørn

    2014-01-01

    The scope of this project is to explore the possibilities in applying data mining techniques for discovering new knowledge about student absenteeism in primary school. The research consists in analyzing a large dataset collected through the digital protocol system E-protokol. The data mining techniques used for the analysis involves clustering, classification and association rule mining, which are utilized using the machine learning toolset WEKA. The findings includes a number of suggestions ...

  4. Research on the development of green chemistry technology assessment techniques: a material reutilization case

    OpenAIRE

    Hong, Seokpyo; Ahn, Kilsoo; Kim, Sungjune; Gong, Sungyong

    2015-01-01

    Objectives This study presents a methodology that enables a quantitative assessment of green chemistry technologies. Methods The study carries out a quantitative evaluation of a particular case of material reutilization by calculating the level of “greenness” i.e., the level of compliance with the principles of green chemistry that was achieved by implementing a green chemistry technology. Results The results indicate that the greenness level was enhanced by 42% compared to the pre-improvemen...

  5. Development of Promising Insulating Oil and Applied Techniques of EHD, ER·MR

    Science.gov (United States)

    Hanaoka, Ryoichi

    The development of an environment-friendly insulating liquid has been noticed for a new design of oil-filled power apparatus such as transformer from viewpoints of the protection of the environment. The dielectric liquids can also widely be applied to various fields which are concerned in the electromagnetic field. This article introduces the recent trend on promising new vegetable based oil as an electrical insulation, and EHD pumping, ER fluid and MR fluid as the applied techniques of dielectric liquids.

  6. Self-encoding Functional Resin Applying for Combinatorial Chemistry and High Throughput Screening

    Institute of Scientific and Technical Information of China (English)

    DU Lei; CHEN Tong-sheng

    2004-01-01

    A novel solid phase organic synthesis resin was synthesized for combinatorial high-throughput screening,which based on FTIR spectra self-encoding functional resin technology. A new deconvolution strategy termed position encoding deconvolution had illustrated and was compared with some popular combinatorial deconvolution strategies in efficiency and information content. The mimic high throughput screening of hexapeptide library successfully proved the applying of the self-encoding functional resin technology and the position encoding deconvolution strategy.

  7. Laser flash photolysis studies of atmospheric free radical chemistry using optical diagnostic techniques

    Science.gov (United States)

    Wine, Paul H.; Nicovich, J. M.; Hynes, Anthony J.; Stickel, Robert E.; Thorn, R. P.; Chin, Mian; Cronkhite, Jeffrey A.; Shackelford, Christie J.; Zhao, Zhizhong; Daykin, Edward P.

    1993-01-01

    Some recent studies carried out in our laboratory are described where laser flash photolytic production of reactant free radicals has been combined with reactant and/or product detection using time-resolved optical techniques to investigate the kinetics and mechanisms of important atmospheric chemical reactions. Discussed are (1) a study of the radical-radical reaction O + BrO yields Br + O2 where two photolysis lasers are employed to prepare the reaction mixture and where the reactants O and BrO are monitored simultaneously using atomic resonance fluorescence to detect O and multipass UV absorption to detect BrO; (2) a study of the reaction of atomic chlorine with dimethylsulfide (CH3SCH3) where atomic resonance fluorescence detection of Cl is employed to elucidate the kinetics and tunable diode laser absorption spectroscopy is employed to investigate the HCl product yield; and (3) a study of the aqueous phase chemistry of Cl2(-) radicals where longpath UV absorption spectroscopy is employed to investigate the kinetics of the Cl2(-) + H2O reaction.

  8. Strategies and techniques of communication and public relations applied to non-profit sector

    Directory of Open Access Journals (Sweden)

    Ioana – Julieta Josan

    2010-05-01

    Full Text Available The aim of this paper is to summarize the strategies and techniques of communication and public relations applied to non-profit sector.The approach of the paper is to identify the most appropriate strategies and techniques that non-profit sector can use to accomplish its objectives, to highlight specific differences between the strategies and techniques of the profit and non-profit sectors and to identify potential communication and public relations actions in order to increase visibility among target audience, create brand awareness and to change into positive brand sentiment the target perception about the non-profit sector.

  9. Improving skill development: an exploratory study comparing a philosophical and an applied ethical analysis technique

    Science.gov (United States)

    Al-Saggaf, Yeslam; Burmeister, Oliver K.

    2012-09-01

    This exploratory study compares and contrasts two types of critical thinking techniques; one is a philosophical and the other an applied ethical analysis technique. The two techniques analyse an ethically challenging situation involving ICT that a recent media article raised to demonstrate their ability to develop the ethical analysis skills of ICT students and professionals. In particular the skill development focused on includes: being able to recognise ethical challenges and formulate coherent responses; distancing oneself from subjective judgements; developing ethical literacy; identifying stakeholders; and communicating ethical decisions made, to name a few.

  10. Separation chemistry and clean technique of cerium(IV):A review

    Institute of Scientific and Technical Information of China (English)

    邹丹; 陈继; 李德谦

    2014-01-01

    The separation method of changeable valence RE element of cerium (Ce) was reviewed in this paper. Solvent extraction is the most effective and efficient method to separate Ce(IV) from RE(III), usually accompanied with fluorine (F) and phosphor (P) from bastnaesite and monazite etc. By roast or wet-air oxidation, Ce(III) of bastnaesite and monazite was oxidized into Ce(IV), and Cyanex923 and [A336][P507] have been investigated to co-extract and recover Ce(IV), F and P from H2SO4 leaching liquor, leading to favorable conditions for the subsequent separation of Th(IV) and RE(III). The interaction of Ce(IV) and F and/or P enhances the roasting, leaching and extraction of Ce(IV) due to increasing of the stability of Ce(IV), and the formation of CeF3 and CePO4 after reductive stripping will benefit the utilization of F and P. For dealing with RE ores of high-content Ce, the clean process of oxidation roasting and Ce(IV)-F separation for Sichuan bastnaesite highlights the advantages of Ce(IV) based clean technique, which firstly demonstrates the comprehensive utilization of Ce(IV), Th(IV), F and RE(III) and prevention of environmental pollution from foun-tainhead. A preliminary flowsheet of two-step oxidation and extraction of Ce(IV) for Bayan Obo mixed ores was further proposed to process the oxidation and extraction of Ce(IV) in presence of both F and P, indicating the possibility of similar effects with clean process of Sichuan bastnaesite. Ce(IV) separation chemistry and clean technique will open up new realms for light RE resources utilization, meeting“Emission Standards of Pollutants from Rare Earths Industry”promulgated by China’s Ministry of Environment Protection (MOP) in 2011.

  11. Improving operating room efficiency by applying bin-packing and portfolio techniques to surgical case scheduling

    NARCIS (Netherlands)

    Houdenhoven, van M.; Oostrum, van J.M.; Hans, E.W.; Wullink, G.; Kazemier, G.

    2013-01-01

    BACKGROUND: An operating room (OR) department has adopted an efficient business model and subsequently investigated how efficiency could be further improved. The aim of this study is to show the efficiency improvement of lowering organizational barriers and applying advanced mathematical techniques.

  12. Applying Modern Techniques and Carrying Out English .Extracurricular—— On the Model United Nations Activity

    Institute of Scientific and Technical Information of China (English)

    XuXiaoyu; WangJian

    2004-01-01

    This paper is an introduction of the extracurricular activity of the Model United Nations in Northwestern Polyteehnical University (NPU) and it focuses on the application of the modem techniques in the activity and the pedagogical theories applied in it. An interview and questionnaire research will reveal the influence of the Model United Nations.

  13. Difficulties applying recent blind source separation techniques to EEG and MEG

    CERN Document Server

    Knuth, Kevin H

    2015-01-01

    High temporal resolution measurements of human brain activity can be performed by recording the electric potentials on the scalp surface (electroencephalography, EEG), or by recording the magnetic fields near the surface of the head (magnetoencephalography, MEG). The analysis of the data is problematic due to the fact that multiple neural generators may be simultaneously active and the potentials and magnetic fields from these sources are superimposed on the detectors. It is highly desirable to un-mix the data into signals representing the behaviors of the original individual generators. This general problem is called blind source separation and several recent techniques utilizing maximum entropy, minimum mutual information, and maximum likelihood estimation have been applied. These techniques have had much success in separating signals such as natural sounds or speech, but appear to be ineffective when applied to EEG or MEG signals. Many of these techniques implicitly assume that the source distributions hav...

  14. How to Apply Student-centered Teaching Techniques in a Large Class%How to Apply Student-centered Teaching Techniques in a Larae Class

    Institute of Scientific and Technical Information of China (English)

    李焱

    2008-01-01

    It is very common to have a class of 50 or more students in Chinese schools,and teaching a foreign language effectively to a large class is really hard work.In order to change the teacher-centered teaching model into the student-centered one,Teachers should keep students' needs,interests,and learning styles in mind,apply several kinds of teaching techniques,organize different clas$1~OIlll activities and encourage,praise and appreciate both students' success and learning process all the time.If teachers place more responsibility in the hands of students,serve as "presenter or facilitator of knowledge"instead of "source of all knowledge",they can greatly motivate students to learn the language in a very active,cooperative andeffectiveway.After all,peoplelearn by doing,not only by watching andlistening.

  15. Selected constants oxydo-reduction potentials tables of constants and numerical data affiliated to the International Union of Pure and Applied Chemistry, v.8

    CERN Document Server

    Charlot, G

    1958-01-01

    Selected Constants: Oxydo-Reduction Potentials contains Tables of the most probable value of the normal oxidation-reduction potential, or of the formal or apparent potential, of a given oxidation-reduction system. This book is prepared under the sponsorship of the Commission on Electrochemical Data of the Section of Analytical Chemistry of the International Union of Pure and Applied Chemistry. It is included in a general program of the Section of Analytical Chemistry. Entry items are classified in alphabetical order. This book will be of value to specialized and non-specialized chemists, teach

  16. Uranium chemistry in blood and aqueous media. Techniques of studies; Chimie de l`uranium en milieux aqueux et sanguin. Techniques d`etudes

    Energy Technology Data Exchange (ETDEWEB)

    Scapolan, St.

    1996-11-01

    The object of this report in a first step, is to understand the chemistry of uranium in aqueous phase by specifying the behavior of this element in function of several parameters such PH, concentration of present species, temperature, ionic force. In a second step, investigation techniques are reviewed: X rays diffraction, potentiometric titrations, polarography, spectrophotometry, NMR of {sup 13}C, {sup 31}P, {sup 17}O, capillary electrophoresis, laser detection. The third part brings elements to understand the uranium complexation in blood medium.

  17. Environmental water monitoring by capillary electrophoresis and result comparison with solvent chemistry techniques.

    Science.gov (United States)

    Sirén, Heli; Väntsi, Sirpa

    2002-05-24

    The aim of this work was to determine inorganic ions from natural waters by capillary electrophoresis (CE) and to compare the results obtained with those measured with conventional solvent chemistry techniques. The project was part of a larger CE study, during which we measured inorganic ions from some lake and river systems and groundwaters in Southern Finland. Results obtained from contaminated Finnish waters were compared with samples from the River Rhine in the Düsseldorf area. Two CE methods were used for analysis: one for determination of chloride, sulfate, nitrite and nitrate at pH 7.7 and the other for ammonium, potassium, calcium, sodium and magnesium at pH 3.6, both methods using identification based on indirect UV detection. Two separation methods were used in order to prevent complex formation of metals with sulfate, hydroxide and decomposed organic matter present in the environmental samples. On the basis of the CE studies dilution was needed for those samples having more than 100 mg/l of sulfate, chloride, calcium and sodium. On average, the natural waters in the study contained ammonium, magnesium, sodium, potassium and calcium below 0.3, 20, 200, 20, and 200 mg/l, respectively. The concentrations of chloride, sulfate, nitrite and nitrate were below 20, 100, 10, and 10 mg/l, respectively. Correlation of the CE results with those acquired by titration, atomic absorption spectrometry, ion chromatography and flow injection analysis were obtained; R2 values for the comparison tests varied from 0.8816 to 0.9994 depending on the ion. The repeatabilities of the anion and cation CE methods were tested using laboratory-made reference sample mixtures with high and low salt concentration. PMID:12102308

  18. Modelling the effects of the sterile insect technique applied to Eldana saccharina Walker in sugarcane

    Directory of Open Access Journals (Sweden)

    L Potgieter

    2012-12-01

    Full Text Available A mathematical model is formulated for the population dynamics of an Eldana saccharina Walker infestation of sugarcane under the influence of partially sterile released insects. The model describes the population growth of and interaction between normal and sterile E.saccharina moths in a temporally variable, but spatially homogeneous environment. The model consists of a deterministic system of difference equations subject to strictly positive initial data. The primary objective of this model is to determine suitable parameters in terms of which the above population growth and interaction may be quantified and according to which E.saccharina infestation levels and the associated sugarcane damage may be measured. Although many models have been formulated in the past describing the sterile insect technique, few of these models describe the technique for Lepidopteran species with more than one life stage and where F1-sterility is relevant. In addition, none of these models consider the technique when fully sterile females and partially sterile males are being released. The model formulated is also the first to describe the technique applied specifically to E.saccharina, and to consider the economic viability of applying the technique to this species. Pertinent decision support is provided to farm managers in terms of the best timing for releases, release ratios and release frequencies.

  19. Renormalization techniques applied to the study of density of states in disordered systems

    International Nuclear Information System (INIS)

    A general scheme for real space renormalization of formal scattering theory is presented and applied to the calculation of density of states (DOS) in some finite width systems. This technique is extended in a self-consistent way, to the treatment of disordered and partially ordered chains. Numerical results of moments and DOS are presented in comparison with previous calculations. In addition, a self-consistent theory for the magnetic order problem in a Hubbard chain is derived and a parametric transition is observed. Properties of localization of the electronic states in disordered chains are studied through various decimation averaging techniques and using numerical simulations. (author)

  20. Phase-shifting technique applied to circular harmonic-based joint transform correlator

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The phase-shifting technique is applied to the circular harmonic expansion-based joint transform correlator. Computer simulation has shown that the light efficiency and the discrimination capability are greatly enhanced, and the full rotation invariance is preserved after the phase-shifting technique has been used. A rotation-invariant optical pattern recognition with high discrimination capability and high light efficiency is obtained. The influence of the additive noise on the performance of the correlator is also investigated. However, the anti-noise capability of this kind of correlator still needs improving.

  1. A Component Approach to Collaborative Scientific Software Development: Tools and Techniques Utilized by the Quantum Chemistry Science Application Partnership

    Directory of Open Access Journals (Sweden)

    Joseph P. Kenny

    2008-01-01

    Full Text Available Cutting-edge scientific computing software is complex, increasingly involving the coupling of multiple packages to combine advanced algorithms or simulations at multiple physical scales. Component-based software engineering (CBSE has been advanced as a technique for managing this complexity, and complex component applications have been created in the quantum chemistry domain, as well as several other simulation areas, using the component model advocated by the Common Component Architecture (CCA Forum. While programming models do indeed enable sound software engineering practices, the selection of programming model is just one building block in a comprehensive approach to large-scale collaborative development which must also address interface and data standardization, and language and package interoperability. We provide an overview of the development approach utilized within the Quantum Chemistry Science Application Partnership, identifying design challenges, describing the techniques which we have adopted to address these challenges and highlighting the advantages which the CCA approach offers for collaborative development.

  2. Applying Squeezing Technique to Clayrocks: Lessons Learned from Experiments at Mont Terri Rock Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez, A. M.; Sanchez-Ledesma, D. M.; Tournassat, C.; Melon, A.; Gaucher, E.; Astudillo, E.; Vinsot, A.

    2013-07-01

    Knowledge of the pore water chemistry in clay rock formations plays an important role in determining radionuclide migration in the context of nuclear waste disposal. Among the different in situ and ex-situ techniques for pore water sampling in clay sediments and soils, squeezing technique dates back 115 years. Although different studies have been performed about the reliability and representativeness of squeezed pore waters, more of them were achieved on high porosity, high water content and unconsolidated clay sediments. A very few of them tackled the analysis of squeezed pore water from low-porosity, low water content and highly consolidated clay rocks. In this work, a specially designed and fabricated one-dimensional compression cell two directional fluid flow was used to extract and analyse the pore water composition of Opalinus Clay core samples from Mont Terri (Switzerland). The reproducibility of the technique is good and no ionic ultrafiltration, chemical fractionation or anion exclusion was found in the range of pressures analysed: 70-200 MPa. Pore waters extracted in this range of pressures do not decrease in concentration, which would indicate a dilution of water by mixing of the free pore water and the outer layers of double layer water (Donnan water). A threshold (safety) squeezing pressure of 175 MPa was established for avoiding membrane effects (ion filtering, anion exclusion, etc.) from clay particles induced by increasing pressures. Besides, the pore waters extracted at these pressures are representative of the Opalinus Clay formation from a direct comparison against in situ collected borehole waters. (Author)

  3. Applying Squeezing Technique to Clayrocks: Lessons Learned from Experiments at Mont Terri Rock Laboratory

    International Nuclear Information System (INIS)

    Knowledge of the pore water chemistry in clay rock formations plays an important role in determining radionuclide migration in the context of nuclear waste disposal. Among the different in situ and ex-situ techniques for pore water sampling in clay sediments and soils, squeezing technique dates back 115 years. Although different studies have been performed about the reliability and representativeness of squeezed pore waters, more of them were achieved on high porosity, high water content and unconsolidated clay sediments. A very few of them tackled the analysis of squeezed pore water from low-porosity, low water content and highly consolidated clay rocks. In this work, a specially designed and fabricated one-dimensional compression cell two directional fluid flow was used to extract and analyse the pore water composition of Opalinus Clay core samples from Mont Terri (Switzerland). The reproducibility of the technique is good and no ionic ultrafiltration, chemical fractionation or anion exclusion was found in the range of pressures analysed: 70-200 MPa. Pore waters extracted in this range of pressures do not decrease in concentration, which would indicate a dilution of water by mixing of the free pore water and the outer layers of double layer water (Donnan water). A threshold (safety) squeezing pressure of 175 MPa was established for avoiding membrane effects (ion filtering, anion exclusion, etc.) from clay particles induced by increasing pressures. Besides, the pore waters extracted at these pressures are representative of the Opalinus Clay formation from a direct comparison against in situ collected borehole waters. (Author)

  4. Chemistry Rocks: Redox Chemistry as a Geologic Tool.

    Science.gov (United States)

    Burns, Mary Sue

    2001-01-01

    Applies chemistry to earth science, uses rocks in chemistry laboratories, and teaches about transition metal chemistry, oxidation states, and oxidation-reduction reactions from firsthand experiences. (YDS)

  5. Comparison between different techniques applied to quartz CPO determination in granitoid mylonites

    Science.gov (United States)

    Fazio, Eugenio; Punturo, Rosalda; Cirrincione, Rosolino; Kern, Hartmut; Wenk, Hans-Rudolph; Pezzino, Antonino; Goswami, Shalini; Mamtani, Manish

    2016-04-01

    Since the second half of the last century, several techniques have been adopted to resolve the crystallographic preferred orientation (CPO) of major minerals constituting crustal and mantle rocks. To this aim, many efforts have been made to increase the accuracy of such analytical devices as well as to progressively reduce the time needed to perform microstructural analysis. It is worth noting that many of these microstructural studies deal with quartz CPO because of the wide occurrence of this mineral phase in crustal rocks as well as its quite simple chemical composition. In the present work, four different techniques were applied to define CPOs of dynamically recrystallized quartz domains from naturally deformed rocks collected from a ductile crustal scale shear zone in order to compare their advantages and limitation. The selected Alpine shear zone is located in the Aspromonte Massif (Calabrian Peloritani Orogen, southern Italy) representing granitoid lithotypes. The adopted methods span from "classical" universal stage (US), to image analysis technique (CIP), electron back-scattered diffraction (EBSD), and time of flight neutron diffraction (TOF). When compared, bulk texture pole figures obtained by means of these different techniques show a good correlation. Advances in analytical techniques used for microstructural investigations are outlined by discussing results of quartz CPO that are presented in this study.

  6. Wire-mesh and ultrasound techniques applied for the characterization of gas-liquid slug flow

    Energy Technology Data Exchange (ETDEWEB)

    Ofuchi, Cesar Y.; Sieczkowski, Wytila Chagas; Neves Junior, Flavio; Arruda, Lucia V.R.; Morales, Rigoberto E.M.; Amaral, Carlos E.F.; Silva, Marco J. da [Federal University of Technology of Parana, Curitiba, PR (Brazil)], e-mails: ofuchi@utfpr.edu.br, wytila@utfpr.edu.br, neves@utfpr.edu.br, lvrarruda@utfpr.edu.br, rmorales@utfpr.edu.br, camaral@utfpr.edu.br, mdasilva@utfpr.edu.br

    2010-07-01

    Gas-liquid two-phase flows are found in a broad range of industrial applications, such as chemical, petrochemical and nuclear industries and quite often determine the efficiency and safety of process and plants. Several experimental techniques have been proposed and applied to measure and quantify two-phase flows so far. In this experimental study the wire-mesh sensor and an ultrasound technique are used and comparatively evaluated to study two-phase slug flows in horizontal pipes. The wire-mesh is an imaging technique and thus appropriated for scientific studies while ultrasound-based technique is robust and non-intrusive and hence well suited for industrial applications. Based on the measured raw data it is possible to extract some specific slug flow parameters of interest such as mean void fraction and characteristic frequency. The experiments were performed in the Thermal Sciences Laboratory (LACIT) at UTFPR, Brazil, in which an experimental two-phase flow loop is available. The experimental flow loop comprises a horizontal acrylic pipe of 26 mm diameter and 9 m length. Water and air were used to produce the two phase flow under controlled conditions. The results show good agreement between the techniques. (author)

  7. Applied methods and techniques for mechatronic systems modelling, identification and control

    CERN Document Server

    Zhu, Quanmin; Cheng, Lei; Wang, Yongji; Zhao, Dongya

    2014-01-01

    Applied Methods and Techniques for Mechatronic Systems brings together the relevant studies in mechatronic systems with the latest research from interdisciplinary theoretical studies, computational algorithm development and exemplary applications. Readers can easily tailor the techniques in this book to accommodate their ad hoc applications. The clear structure of each paper, background - motivation - quantitative development (equations) - case studies/illustration/tutorial (curve, table, etc.) is also helpful. It is mainly aimed at graduate students, professors and academic researchers in related fields, but it will also be helpful to engineers and scientists from industry. Lei Liu is a lecturer at Huazhong University of Science and Technology (HUST), China; Quanmin Zhu is a professor at University of the West of England, UK; Lei Cheng is an associate professor at Wuhan University of Science and Technology, China; Yongji Wang is a professor at HUST; Dongya Zhao is an associate professor at China University o...

  8. Software engineering techniques applied to agricultural systems an object-oriented and UML approach

    CERN Document Server

    Papajorgji, Petraq J

    2014-01-01

    Software Engineering Techniques Applied to Agricultural Systems presents cutting-edge software engineering techniques for designing and implementing better agricultural software systems based on the object-oriented paradigm and the Unified Modeling Language (UML). The focus is on the presentation of  rigorous step-by-step approaches for modeling flexible agricultural and environmental systems, starting with a conceptual diagram representing elements of the system and their relationships. Furthermore, diagrams such as sequential and collaboration diagrams are used to explain the dynamic and static aspects of the software system.    This second edition includes: a new chapter on Object Constraint Language (OCL), a new section dedicated to the Model-VIEW-Controller (MVC) design pattern, new chapters presenting details of two MDA-based tools – the Virtual Enterprise and Olivia Nova, and a new chapter with exercises on conceptual modeling.  It may be highly useful to undergraduate and graduate students as t...

  9. Wavelets, Curvelets and Multiresolution Analysis Techniques Applied to Implosion Symmetry Characterization of ICF Targets

    CERN Document Server

    Afeyan, Bedros; Starck, Jean Luc; Cuneo, Michael

    2012-01-01

    We introduce wavelets, curvelets and multiresolution analysis techniques to assess the symmetry of X ray driven imploding shells in ICF targets. After denoising X ray backlighting produced images, we determine the Shell Thickness Averaged Radius (STAR) of maximum density, r*(N, {\\theta}), where N is the percentage of the shell thickness over which to average. The non-uniformities of r*(N, {\\theta}) are quantified by a Legendre polynomial decomposition in angle, {\\theta}. Undecimated wavelet decompositions outperform decimated ones in denoising and both are surpassed by the curvelet transform. In each case, hard thresholding based on noise modeling is used. We have also applied combined wavelet and curvelet filter techniques with variational minimization as a way to select the significant coefficients. Gains are minimal over curvelets alone in the images we have analyzed.

  10. Guidelines for depth data collection in rivers when applying interpolation techniques (kriging for river restoration

    Directory of Open Access Journals (Sweden)

    M. Rivas-Casado

    2007-05-01

    Full Text Available River restoration appraisal requires the implementation of monitoring programmes that assess the river site before and after the restoration project. However, little work has yet been developed to design effective and efficient sampling strategies. Three main variables need to be considered when designing monitoring programmes: space, time and scale. The aim of this paper is to describe the methodology applied to analyse the variation of depth in space, scale and time so more comprehensive monitoring programmes can be developed. Geostatistical techniques were applied to study the spatial dimension (sampling strategy and density, spectral analysis was used to study the scale at which depth shows cyclic patterns, whilst descriptive statistics were used to assess the temporal variation. A brief set of guidelines have been summarised in the conclusion.

  11. Applying Data Mining Techniques to Improve Information Security in the Cloud: A Single Cache System Approach

    Directory of Open Access Journals (Sweden)

    Amany AlShawi

    2016-01-01

    Full Text Available Presently, the popularity of cloud computing is gradually increasing day by day. The purpose of this research was to enhance the security of the cloud using techniques such as data mining with specific reference to the single cache system. From the findings of the research, it was observed that the security in the cloud could be enhanced with the single cache system. For future purposes, an Apriori algorithm can be applied to the single cache system. This can be applied by all cloud providers, vendors, data distributors, and others. Further, data objects entered into the single cache system can be extended into 12 components. Database and SPSS modelers can be used to implement the same.

  12. Applying traditional signal processing techniques to social media exploitation for situational understanding

    Science.gov (United States)

    Abdelzaher, Tarek; Roy, Heather; Wang, Shiguang; Giridhar, Prasanna; Al Amin, Md. Tanvir; Bowman, Elizabeth K.; Kolodny, Michael A.

    2016-05-01

    Signal processing techniques such as filtering, detection, estimation and frequency domain analysis have long been applied to extract information from noisy sensor data. This paper describes the exploitation of these signal processing techniques to extract information from social networks, such as Twitter and Instagram. Specifically, we view social networks as noisy sensors that report events in the physical world. We then present a data processing stack for detection, localization, tracking, and veracity analysis of reported events using social network data. We show using a controlled experiment that the behavior of social sources as information relays varies dramatically depending on context. In benign contexts, there is general agreement on events, whereas in conflict scenarios, a significant amount of collective filtering is introduced by conflicted groups, creating a large data distortion. We describe signal processing techniques that mitigate such distortion, resulting in meaningful approximations of actual ground truth, given noisy reported observations. Finally, we briefly present an implementation of the aforementioned social network data processing stack in a sensor network analysis toolkit, called Apollo. Experiences with Apollo show that our techniques are successful at identifying and tracking credible events in the physical world.

  13. Grid-based Moment Tensor Inversion Technique Apply for Earthquakes Offshore of Northeast Taiwan

    Science.gov (United States)

    Cheng, H.; Lee, S.; Ma, K.

    2010-12-01

    We use a grid-based moment tensor inversion technique and broadband continuous recordings to real-time monitoring the earthquakes offshore northeast Taiwan. The moment tensor inversion technique and a grid search scheme are applied to obtain the information of source parameters, including the hypocenter, moment magnitude, and focal mechanism. In Taiwan, the routine moment tensor solutions are reported by CWB(Central Weather Bureau) and BATS(Broadband Array in Taiwan for Seismology) which both require some lag time for the information on event time and location before doing CMT(Centroid Moment Tensor) analysis. By using the Grid-based moment tensor inversion technique, the event location and focal mechanism could be obtained simultaneously within about two minutes after the occurrence of the earthquake. This inversion procedure is based on a 1-D Green’s functions database calculated by frequency-wavenumber(fk) method. The northeast offshore of Taiwan has been taken into account as our first test area which covers the region of 121.5E to 123E, 23.5N to 25N, and the depth to 136 km. A 3D grid system is set in this study area with average grid size of 10 x 10 x 10 km3. We compare our results with the past earthquakes from 2008 to 2010 which had analyzed by BATS CMT. We also compare the event time detected by GridMT with the CWB earthquake reports. The results indicate that the grid-based moment tensor inversion system is efficient and realizable to be applied real-time on monitoring the local seismic activity. Our long-term goal is to use the GridMT technique with fully 3-D Green’s functions for the whole Taiwan in the future.

  14. Analytical chemistry in semiconductor manufacturing: Techniques, role of nuclear methods and need for quality control

    International Nuclear Information System (INIS)

    This report is the result of a consultants meeting held in Gaithersburg, USA, 2-3 October 1987. The meeting was hosted by the National Bureau of Standards and Technology, and it was attended by 18 participants from Denmark, Finland, India, Japan, Norway, People's Republic of China and the USA. The purpose of the meeting was to assess the present status of analytical chemistry in semiconductor manufacturing, the role of nuclear analytical methods and the need for internationally organized quality control of the chemical analysis. The report contains the three presentations in full and a summary report of the discussions. Thus, it gives an overview of the need of analytical chemistry in manufacturing of silicon based devices, the use of nuclear analytical methods, and discusses the need for quality control. Refs, figs and tabs

  15. A comparison of software- and hardware-gating techniques applied to near-field antenna measurements

    Directory of Open Access Journals (Sweden)

    M. M. Leibfritz

    2007-06-01

    Full Text Available It is well-known that antenna measurements are error prone with respect to reflections within an antenna measurements test facility. The influence on near-field (NF measurements with subsequent NF to far-field (FF transformation can be significantly reduced applying soft- or hard-gating techniques. Hard-gating systems are often used in compact range facilities employing fast PIN-diode switches (Hartmann, 2000 whereas soft-gating systems utilize a network analyzer to gather frequency samples and eliminate objectionable distortions in the time-domain by means of Fourier-transformation techniques. Near-field (NF antenna measurements are known to be sensitive to various errors concerning the measurement setup as there have to be mentioned the accuracy of the positioner, the measurement instruments or the quality of the anechoic chamber itself. Two different approaches employing soft- and hard-gating techniques are discussed with respect to practical applications. Signal generation for the antenna under test (AUT is implemented using a newly developed hard-gating system based on digital signal synthesis allowing gate-widths of 250 ps to 10 ns. Measurement results obtained from a Yagi-Uda antenna under test (AUT and a dual polarized open-ended waveguide used as probe antenna are presented for the GSM 1800 frequency range.

  16. Downscaling Statistical Model Techniques for Climate Change Analysis Applied to the Amazon Region

    Directory of Open Access Journals (Sweden)

    David Mendes

    2014-01-01

    Full Text Available The Amazon is an area covered predominantly by dense tropical rainforest with relatively small inclusions of several other types of vegetation. In the last decades, scientific research has suggested a strong link between the health of the Amazon and the integrity of the global climate: tropical forests and woodlands (e.g., savannas exchange vast amounts of water and energy with the atmosphere and are thought to be important in controlling local and regional climates. Consider the importance of the Amazon biome to the global climate changes impacts and the role of the protected area in the conservation of biodiversity and state-of-art of downscaling model techniques based on ANN Calibrate and run a downscaling model technique based on the Artificial Neural Network (ANN that is applied to the Amazon region in order to obtain regional and local climate predicted data (e.g., precipitation. Considering the importance of the Amazon biome to the global climate changes impacts and the state-of-art of downscaling techniques for climate models, the shower of this work is presented as follows: the use of ANNs good similarity with the observation in the cities of Belém and Manaus, with correlations of approximately 88.9% and 91.3%, respectively, and spatial distribution, especially in the correction process, representing a good fit.

  17. Applied research on air pollution using nuclear-related analytical techniques

    International Nuclear Information System (INIS)

    A co-ordinated research programme (CRP) on applied research on air pollution using nuclear-related techniques is a global CRP which will run from 1992-1996, and will build upon the experience gained by the Agency from the laboratory support that it has been providing for several years to BAPMoN - the Background Air Pollution Monitoring Network programme organized under the auspices of the World Meterological Organization. The purpose of this CRP is to promote the use of nuclear analytical techniques in air pollution studies, e.g. NAA, XFR, and PIXE for the analysis of toxic and other trace elements in suspended particulate matter (including air filter samples), rainwater and fog-water samples, and in biological indicators of air pollution (e.g. lichens and mosses). The main purposes of the core programme are i) to support the use of nuclear and nuclear-related analytical techniques for practically-oriented research and monitoring studies on air pollution ii) to identify major sources of air pollution affecting each of the participating countries with particular reference to toxic heavy metals, and iii) to obtain comparative data on pollution levels in areas of high pollution (e.g. a city centre or a populated area downwind of a large pollution source) and low pollution (e.g. rural areas). This document reports the discussions held during the first Research Co-ordination Meeting (RCM) for the CRP which took place at the IAEA Headquarters in Vienna. Refs, figs and tabs

  18. Photothermal Techniques Applied to the Thermal Characterization of l-Cysteine Nanofluids

    Science.gov (United States)

    Alvarado, E. Maldonado; Ramón-Gallegos, E.; Jiménez Pérez, J. L.; Cruz-Orea, A.; Hernández Rosas, J.

    2013-05-01

    Thermal-diffusivity ( D) and thermal-effusivity ( e) measurements were carried out in l-cysteine nanoliquids l-cysteine in combination with Au nanoparticles and protoporphyrin IX (PpIX) nanofluid) by using thermal lens spectrometry (TLS) and photopyroelectric (PPE) techniques. The TLS technique was used in the two mismatched mode experimental configuration to obtain the thermal-diffusivity of the samples. On the other hand, the sample thermal effusivity ( e) was obtained by using the PPE technique where the temperature variation of a sample, exposed to modulated radiation, is measured with a pyrolectric sensor. From the obtained thermal-diffusivity and thermal-effusivity values, the thermal conductivity and specific heat capacity of the sample were calculated. The obtained thermal parameters were compared with the thermal parameters of water. The results of this study could be applied to the detection of tumors by using the l-cysteine in combination with Au nanoparticles and PpIX nanofluid, called conjugated in this study.

  19. New Region Growing based on Thresholding Technique Applied to MRI Data

    Directory of Open Access Journals (Sweden)

    A. Afifi

    2015-06-01

    Full Text Available This paper proposes an optimal region growing threshold for the segmentation of magnetic resonance images (MRIs. The proposed algorithm combines local search procedure with thresholding region growing to achieve better generic seeds and optimal thresholds for region growing method. A procedure is used to detect the best possible seeds from a set of data distributed all over the image as a high accumulator of the histogram. The output seeds are fed to the local search algorithm to extract the best seeds around initial seeds. Optimal thresholds are used to overcome the limitations of region growing algorithm and to select the pixels sequentially in a random walk starting at the seed point. The proposed algorithm works automatically without any predefined parameters. The proposed algorithm is applied to the challenging application "gray matter/white matter" segmentation datasets. The experimental results compared with other segmentation techniques show that the proposed algorithm produces more accurate and stable results.

  20. Operations research techniques applied to service center logistics in power distribution users

    Directory of Open Access Journals (Sweden)

    Maria Teresinha Arns Steiner

    2006-12-01

    Full Text Available This paper deals with the optimization for the logistics regarding services demanded byusers of power distribution lines, served by the Portão office, located in Curitiba, PR, Brazil,and operated by COPEL (Paranaense Power Company. Through the use of OperationsResearch techniques, an Integer Programming Mathematical model and Floyd Algorithm, amethod was defined to determine in an optimized way, the number of teams needed by theselected office, as well as, the optimized assignment for the teams to the sites in need, inorder to offer efficient services to the users and, besides that, the immediate execution onemergencies and, as to the other services, accordingly to parameters set by the NationalPower Agency together with COPEL. The methodology hereby presented is generic, so thatit could be applied to any power network (or any of its lines, and it has presented verysatisfactory results to the case in analysis.

  1. A systematic review of applying modern software engineering techniques to developing robotic systems

    Directory of Open Access Journals (Sweden)

    Claudia Pons

    2012-04-01

    Full Text Available Robots have become collaborators in our daily life. While robotic systems become more and more complex, the need to engineer their software development grows as well. The traditional approaches used in developing these software systems are reaching their limits; currently used methodologies and tools fall short of addressing the needs of such complex software development. Separating robotics’ knowledge from short-cycled implementation technologies is essential to foster reuse and maintenance. This paper presents a systematic review (SLR of the current use of modern software engineering techniques for developing robotic software systems and their actual automation level. The survey was aimed at summarizing existing evidence concerning applying such technologies to the field of robotic systems to identify any gaps in current research to suggest areas for further investigation and provide a background for positioning new research activities.

  2. Electron Correlation Microscopy: A New Technique for Studying Local Atom Dynamics Applied to a Supercooled Liquid.

    Science.gov (United States)

    He, Li; Zhang, Pei; Besser, Matthew F; Kramer, Matthew Joseph; Voyles, Paul M

    2015-08-01

    Electron correlation microscopy (ECM) is a new technique that utilizes time-resolved coherent electron nanodiffraction to study dynamic atomic rearrangements in materials. It is the electron scattering equivalent of photon correlation spectroscopy with the added advantage of nanometer-scale spatial resolution. We have applied ECM to a Pd40Ni40P20 metallic glass, heated inside a scanning transmission electron microscope into a supercooled liquid to measure the structural relaxation time τ between the glass transition temperature T g and the crystallization temperature, T x . τ determined from the mean diffraction intensity autocorrelation function g 2(t) decreases with temperature following an Arrhenius relationship between T g and T g +25 K, and then increases as temperature approaches T x . The distribution of τ determined from the g 2(t) of single speckles is broad and changes significantly with temperature.

  3. Solar coronal magnetic fields derived using seismology techniques applied to omnipresent sunspot waves

    CERN Document Server

    Jess, D B; Ryans, R S I; Christian, D J; Keys, P H; Mathioudakis, M; Mackay, D H; Prasad, S Krishna; Banerjee, D; Grant, S D T; Yau, S; Diamond, C

    2016-01-01

    Sunspots on the surface of the Sun are the observational signatures of intense manifestations of tightly packed magnetic field lines, with near-vertical field strengths exceeding 6,000 G in extreme cases. It is well accepted that both the plasma density and the magnitude of the magnetic field strength decrease rapidly away from the solar surface, making high-cadence coronal measurements through traditional Zeeman and Hanle effects difficult since the observational signatures are fraught with low-amplitude signals that can become swamped with instrumental noise. Magneto-hydrodynamic (MHD) techniques have previously been applied to coronal structures, with single and spatially isolated magnetic field strengths estimated as 9-55 G. A drawback with previous MHD approaches is that they rely on particular wave modes alongside the detectability of harmonic overtones. Here we show, for the first time, how omnipresent magneto-acoustic waves, originating from within the underlying sunspot and propagating radially outwa...

  4. Applying Multi-Criteria Decision-Making Techniques to Prioritize Agility Drivers

    Directory of Open Access Journals (Sweden)

    Ahmad Jafarnejad

    2013-07-01

    Full Text Available It seems that to recognize and classify the factors affecting organizational agility and need to specify the amount of their importance for the organization is essential to preserve survival and success in today's environment. This paper reviews the concept of agility and its division in the following indicators included the factors of motivations organizational agility that have been ranked in terms of level of importance and their influence by the techniques of MCDM. The inner complexity, suppliers, competition, customer needs, market, technology and social factors are the most important factors affecting organizational agility that can evaluate the following indicators and apply them and re-engineering processes, reviews and predictions of customer needs and better understanding of competitive environment and supply chain specify organizational agility and success ultimately.

  5. A comparative assessment of texture analysis techniques applied to bone tool use-wear

    Science.gov (United States)

    Watson, Adam S.; Gleason, Matthew A.

    2016-06-01

    The study of bone tools, a specific class of artifacts often essential to perishable craft production, provides insight into industries otherwise largely invisible archaeologically. Building on recent breakthroughs in the analysis of microwear, this research applies confocal laser scanning microscopy and texture analysis techniques drawn from the field of surface metrology to identify use-wear patterns on experimental and archaeological bone artifacts. Our approach utilizes both conventional parameters and multi-scale geometric characterizations of the areas of worn surfaces to identify statistical similarities as a function of scale. The introduction of this quantitative approach to the study of microtopography holds significant potential for advancement in use-wear studies by reducing inter-observer variability and identifying new parameters useful in the detection of differential wear-patterns.

  6. Active chemistry control for coolant helium applying high-temperature gas-cooled reactors - HTR2008-58096

    International Nuclear Information System (INIS)

    Lifetime extension of high-temperature equipment such as the intermediate heat exchanger of high-temperature gas-cooled reactors (HTGRs) is important from the economical point of view. Since the replacing cost will cause the increasing of the running cost, it is important to reduce replacing times of the high-cost primary equipment during assumed reactor lifetime. In the past, helium chemistry has been controlled by the passive chemistry control technology in which chemical impurity in the coolant helium is removed as low concentration as possible, as does Japan's HTTR. Although the lifetime of high- temperature equipment almost depends upon the chemistry conditions in the coolant helium, it is necessary to establish an active chemistry control technology to maintain adequate chemical conditions. In this study, carbon deposition which could occur at the surface of the heat transfer tubes of the intermediate heat exchanger and decarburization of the high-temperature material of Hastelloy XR used at the heat transfer tubes were evaluated by referring the actual chemistry data obtained by the HTTR. The chemical equilibrium study contributed to clarify the algorism of the chemistry behaviours to be controlled. The created algorism is planned to be added to the instrumentation system of the helium purification systems. In addition, the chemical composition to be maintained during the reactor operation was proposed by evaluating not only core graphite oxidation but also carbon deposition and decarburization. It was identified when the chemical composition could not keep adequately, injection of 10 ppm carbon monoxide could effectively control the chemical composition to the designated stable area where the high-temperature materials could keep their structural integrity beyond the assumed duration. The proposed active chemistry control technology is expected to contribute economically to the purification systems of the future very high-temperature reactors. (authors)

  7. Creep lifing methodologies applied to a single crystal superalloy by use of small scale test techniques

    Energy Technology Data Exchange (ETDEWEB)

    Jeffs, S.P., E-mail: s.p.jeffs@swansea.ac.uk [Institute of Structural Materials, Swansea University, Singleton Park SA2 8PP (United Kingdom); Lancaster, R.J. [Institute of Structural Materials, Swansea University, Singleton Park SA2 8PP (United Kingdom); Garcia, T.E. [IUTA (University Institute of Industrial Technology of Asturias), University of Oviedo, Edificio Departamental Oeste 7.1.17, Campus Universitario, 33203 Gijón (Spain)

    2015-06-11

    In recent years, advances in creep data interpretation have been achieved either by modified Monkman–Grant relationships or through the more contemporary Wilshire equations, which offer the opportunity of predicting long term behaviour extrapolated from short term results. Long term lifing techniques prove extremely useful in creep dominated applications, such as in the power generation industry and in particular nuclear where large static loads are applied, equally a reduction in lead time for new alloy implementation within the industry is critical. The latter requirement brings about the utilisation of the small punch (SP) creep test, a widely recognised approach for obtaining useful mechanical property information from limited material volumes, as is typically the case with novel alloy development and for any in-situ mechanical testing that may be required. The ability to correlate SP creep results with uniaxial data is vital when considering the benefits of the technique. As such an equation has been developed, known as the k{sub SP} method, which has been proven to be an effective tool across several material systems. The current work now explores the application of the aforementioned empirical approaches to correlate small punch creep data obtained on a single crystal superalloy over a range of elevated temperatures. Finite element modelling through ABAQUS software based on the uniaxial creep data has also been implemented to characterise the SP deformation and help corroborate the experimental results.

  8. How Can Synchrotron Radiation Techniques Be Applied for Detecting Microstructures in Amorphous Alloys?

    Directory of Open Access Journals (Sweden)

    Gu-Qing Guo

    2015-11-01

    Full Text Available In this work, how synchrotron radiation techniques can be applied for detecting the microstructure in metallic glass (MG is studied. The unit cells are the basic structural units in crystals, though it has been suggested that the co-existence of various clusters may be the universal structural feature in MG. Therefore, it is a challenge to detect microstructures of MG even at the short-range scale by directly using synchrotron radiation techniques, such as X-ray diffraction and X-ray absorption methods. Here, a feasible scheme is developed where some state-of-the-art synchrotron radiation-based experiments can be combined with simulations to investigate the microstructure in MG. By studying a typical MG composition (Zr70Pd30, it is found that various clusters do co-exist in its microstructure, and icosahedral-like clusters are the popular structural units. This is the structural origin where there is precipitation of an icosahedral quasicrystalline phase prior to phase transformation from glass to crystal when heating Zr70Pd30 MG.

  9. An acceleration technique for the Gauss-Seidel method applied to symmetric linear systems

    Directory of Open Access Journals (Sweden)

    Jesús Cajigas

    2014-06-01

    Full Text Available A preconditioning technique to improve the convergence of the Gauss-Seidel method applied to symmetric linear systems while preserving symmetry is proposed. The preconditioner is of the form I + K and can be applied an arbitrary number of times. It is shown that under certain conditions the application of the preconditioner a finite number of steps reduces the matrix to a diagonal. A series of numerical experiments using matrices from spatial discretizations of partial differential equations demonstrates that both versions of the preconditioner, point and block version, exhibit lower iteration counts than its non-symmetric version. Resumen. Se propone una técnica de precondicionamiento para mejorar la convergencia del método Gauss-Seidel aplicado a sistemas lineales simétricos pero preservando simetría. El precondicionador es de la forma I + K y puede ser aplicado un número arbitrario de veces. Se demuestra que bajo ciertas condiciones la aplicación del precondicionador un número finito de pasos reduce la matriz del sistema precondicionado a una diagonal. Una serie de experimentos con matrices que provienen de la discretización de ecuaciones en derivadas parciales muestra que ambas versiones del precondicionador, por punto y por bloque, muestran un menor número de iteraciones en comparación con la versión que no preserva simetría.

  10. Personnel contamination protection techniques applied during the TMI-2 [Three Mile Island Unit 2] cleanup

    International Nuclear Information System (INIS)

    The severe damage to the Three Mile Island Unit 2 (TMI-2) core and the subsequent discharge of reactor coolant to the reactor and auxiliary buildings resulted in extremely hostile radiological environments in the TMI-2 plant. High fission product surface contamination and radiation levels necessitated the implementation of innovative techniques and methods in performing cleanup operations while assuring effective as low as reasonably achievable (ALARA) practices. The approach utilized by GPU Nuclear throughout the cleanup in applying protective clothing requirements was to consider the overall health risk to the worker including factors such as cardiopulmonary stress, visual and hearing acuity, and heat stress. In applying protective clothing requirements, trade-off considerations had to be made between preventing skin contaminations and possibly overprotecting the worker, thus impacting his ability to perform his intended task at maximum efficiency and in accordance with ALARA principles. The paper discusses the following topics: protective clothing-general use, beta protection, skin contamination, training, personnel access facility, and heat stress

  11. 以化学竞赛为契机 着力培养应用型人才%Cultivating Applied Talents Based on Chemistry Competition

    Institute of Scientific and Technical Information of China (English)

    韦寿莲; 汪洪武; 许秀丽; 刘玲; 严子军; 赵建芬

    2011-01-01

    Owing to a large social demand for applied talents, combining the school orientation, the cultivation target and an awareness of chemistry competition among students, it' s studied on how to optimize the teaching resources, to improve the teaching quality and to promote the cultivation of applied talents through chemistry competitions in local colleges.%基于社会对应用型人才的大量需求,结合肇庆学院的办学定位、培养目标及化学化工学院学生对竞赛的认知,研究地方高校如何通过化学竞赛优化教学资源,提高教学质量,促进应用型人才的培养.

  12. Modern structure of methods and techniques of marketing research, applied by the world and Ukrainian research companies

    Directory of Open Access Journals (Sweden)

    Bezkrovnaya Yulia

    2015-08-01

    Full Text Available The article presents the results of empiric justification of the structure of methods and techniques of marketing research of consumer decisions, applied by the world and Ukrainian research companies.

  13. The Study of Mining Activities and their Influences in the Almaden Region Applying Remote Sensing Techniques

    International Nuclear Information System (INIS)

    This scientific-technical report is a part of an ongoing research work carried out by Celia Rico Fraile in order to obtain the Diploma of Advanced Studies as part of her PhD studies. This work has been developed in collaboration with the Faculty of Science at The Universidad Autonoma de Madrid and the Department of Environment at CIEMAT. The main objective of this work was the characterization and classification of land use in Almaden (Ciudad Real) during cinnabar mineral exploitation and after mining activities ceased in 2002, developing a methodology focused on the integration of remote sensing techniques applying multispectral and hyper spectral satellite data. By means of preprocessing and processing of data from the satellite images as well as data obtained from field campaigns, a spectral library was compiled in order to obtain representative land surfaces within the study area. Monitoring results show that the distribution of areas affected by mining activities is rapidly diminishing in recent years. (Author) 130 refs

  14. Advanced examination techniques applied to the qualification of critical welds for the ITER correction coils

    CERN Document Server

    Sgobba, Stefano; Libeyre, Paul; Marcinek, Dawid Jaroslaw; Piguiet, Aline; Cécillon, Alexandre

    2015-01-01

    The ITER correction coils (CCs) consist of three sets of six coils located in between the toroidal (TF) and poloidal field (PF) magnets. The CCs rely on a Cable-in-Conduit Conductor (CICC), whose supercritical cooling at 4.5 K is provided by helium inlets and outlets. The assembly of the nozzles to the stainless steel conductor conduit includes fillet welds requiring full penetration through the thickness of the nozzle. Static and cyclic stresses have to be sustained by the inlet welds during operation. The entire volume of helium inlet and outlet welds, that are submitted to the most stringent quality levels of imperfections according to standards in force, is virtually uninspectable with sufficient resolution by conventional or computed radiography or by Ultrasonic Testing. On the other hand, X-ray computed tomography (CT) was successfully applied to inspect the full weld volume of several dozens of helium inlet qualification samples. The extensive use of CT techniques allowed a significant progress in the ...

  15. Phase-ratio technique as applied to the assessment of lunar surface roughness

    Science.gov (United States)

    Kaydash, Vadym; Videen, Gorden; Shkuratov, Yuriy

    Regoliths of atmosphereless celestial bodies demonstrate prominent light backscattering that is common for particulate surfaces. This occurs over a wide range of phase angles and can be seen in the phase function [1]. The slope of the function may characterize the complexity of planetary surface structure. Imagery of such a parameter suggests that information can be obtained about the surface, like variations of unresolved surface roughness and microtopography [2]. Phase-ratio imagery allows one to characterize the phase function slope. This imagery requires the ratio of two co-registered images acquired at different phase angles. One important advantage of the procedure is that the inherent albedo variations of the surface are suppressed, and, therefore, the resulting image is sensitive to the surface structure variation [2,3]. The phase-ratio image characterizes surface roughness variation at spatial scales on the order of the incident wavelengths to that of the image resolution. Applying the phase-ratio technique to ground-based telescope data has allowed us to find new lunar surface formations in the southern part of Oceanus Procellarum. These are suggested to be weak swirls [4]. We also combined the phase-ratio technique with the space-derived photometry data acquired from the NASA Lunar Reconnaissance Orbiter with high spatial resolution. Thus we exploited the method to analyze the sites of Apollo landings and Soviet sample-return missions. Phase-ratio imagery has revealed anomalies of the phase-curve slope indicating a smoothing of the surface microstructure at the sites caused by dust uplifted by the engine jets of the descent and ascent modules [5,6]. Analysis of phase-ratios helps to understand how the regolith properties have been affected by robotic and human activity on the Moon [7,8]. We have demonstrated the use of the method to search for fresh natural disturbances of surface structure, e.g., to detect areas of fresh slumps, accumulated material on

  16. Application of green chemistry techniques to prepare electrocatalysts for direct methanol fuel cells.

    Science.gov (United States)

    Shimizu, Kenichi; Wang, Joanna S; Wai, Chien M

    2010-03-25

    A series of green techniques for synthesizing carbon nanotube-supported platinum nanoparticles and their high electrocatalytic activity toward methanol fuel cell applications are reported. The techniques utilize either the supercritical fluid carbon dioxide or water as a medium for depositing platinum nanoparticles on surfaces of multiwalled or single-walled carbon nanotubes. The catalytic properties of the carbon nanotubes-supported Pt nanoparticle catalysts prepared by four different techniques are compared for anodic oxidation of methanol and cathodic reduction of oxygen using cyclic voltammetry. One technique using galvanic exchange of Pt(2+) in water with zerovalent iron present on the surfaces of as-grown single-walled carbon nanotubes produces a Pt catalyst that shows an unusually high catalytic activity for reduction of oxygen but a negligible activity for oxidation of methanol. This fuel-selective catalyst may have a unique application as a cathode catalyst in methanol fuel cells to alleviate the problems caused by crossover of methanol through the polymer electrolyte membrane. PMID:19827801

  17. Study of photochemical transformations of organic azides by matrix isolation techniques and quantum chemistry

    Energy Technology Data Exchange (ETDEWEB)

    Gritsan, N P [Institute of Chemical Kinetics and Combustion, Siberian Branch of the Russian Academy of Sciences, Novosibirsk (Russian Federation)

    2007-12-31

    Results of investigations of organic azide photochemistry in inert gas matrices and the most important spectroscopic studies of the last decade, which formed the basis for the modern views on the photochemistry of azides, are analysed. The unique potential of the matrix isolation technique for the reliable identification of reaction intermediates is demonstrated.

  18. Using Essential Oils to Teach Advanced-Level Organic Chemistry Separation Techniques and Spectroscopy

    Science.gov (United States)

    Bott, Tina M.; Wan, Hayley

    2013-01-01

    Students sometimes have difficulty grasping the importance of when and how basic distillation techniques, column chromatography, TLC, and basic spectroscopy (IR and NMR) can be used to identify unknown compounds within a mixture. This two-part experiment uses mixtures of pleasant-smelling, readily available terpenoid compounds as unknowns to…

  19. Application of green chemistry techniques to prepare electrocatalysts for direct methanol fuel cells.

    Science.gov (United States)

    Shimizu, Kenichi; Wang, Joanna S; Wai, Chien M

    2010-03-25

    A series of green techniques for synthesizing carbon nanotube-supported platinum nanoparticles and their high electrocatalytic activity toward methanol fuel cell applications are reported. The techniques utilize either the supercritical fluid carbon dioxide or water as a medium for depositing platinum nanoparticles on surfaces of multiwalled or single-walled carbon nanotubes. The catalytic properties of the carbon nanotubes-supported Pt nanoparticle catalysts prepared by four different techniques are compared for anodic oxidation of methanol and cathodic reduction of oxygen using cyclic voltammetry. One technique using galvanic exchange of Pt(2+) in water with zerovalent iron present on the surfaces of as-grown single-walled carbon nanotubes produces a Pt catalyst that shows an unusually high catalytic activity for reduction of oxygen but a negligible activity for oxidation of methanol. This fuel-selective catalyst may have a unique application as a cathode catalyst in methanol fuel cells to alleviate the problems caused by crossover of methanol through the polymer electrolyte membrane.

  20. New insights into the fouling mechanism of dissolved organic matter applying nanofiltration membranes with a variety of surface chemistries.

    Science.gov (United States)

    Mustafa, Ghulam; Wyns, Kenny; Buekenhoudt, Anita; Meynen, Vera

    2016-04-15

    Nanofiltration (NF) membrane fouling by DOM remains a major and poorly understood issue. To acquire a better insight we studied the fouling of the DOM fractions humic acids (HAs) and fulvic acids (FAs), with and without Ca(2+), on native and grafted ceramic NF membranes. Grafting with two methods and three different grafting groups allowed to create a range of membranes with a variety of surface chemistries, and a wide range of surface polarity, much broader than ever used in previous studies. A typical polymer (polyamide) NF membrane was included for comparison. All obtained results reveal that membrane fouling is not determined by membrane hydrophilicity/hydrophobicity as a general and sole criterion, but rather on the whole of the surface chemistry determining the amount and strength of the possible foulant-membrane interactions. As a consequence the effect of inorganic ions on the fouling is also dependent on the surface chemistry. Important new insight in the DOM fouling mechanism was acquired, shedding new light on the state-of-the-art knowledge. PMID:26905798

  1. Investigation about the efficiency of the bioaugmentation technique when applied to diesel oil contaminated soils

    Directory of Open Access Journals (Sweden)

    Adriano Pinto Mariano

    2009-10-01

    Full Text Available This work investigated the efficiency of the bioaugmentation technique when applied to diesel oil contaminated soils collected at three service stations. Batch biodegradation experiments were carried out in Bartha biometer flasks (250 mL used to measure the microbial CO2 production. Biodegradation efficiency was also measured by quantifying the concentration of hydrocarbons. In addition to the biodegradation experiments, the capability of the studied cultures and the native microorganisms to biodegrade the diesel oil purchased from a local service station, was verified using a technique based on the redox indicator 2,6 -dichlorophenol indophenol (DCPIP. Results obtained with this test showed that the inocula used in the biodegradation experiments were able to degrade the diesel oil and the tests carried out with the native microorganisms indicated that these soils had a microbiota adapted to degrade the hydrocarbons. In general, no gain was obtained with the addition of microorganisms or even negative effects were observed in the biodegradation experiments.Este trabalho investigou a eficiência da técnica do bioaumento quando aplicada a solos contaminados com óleo diesel coletados em três postos de combustíveis. Experimentos de biodegradação foram realizados em frascos de Bartha (250 mL, usados para medir a produção microbiana de CO2. A eficiência de biodegradação também foi quantificada pela concentração de hidrocarbonetos. Conjuntamente aos experimentos de biodegradação, a capacidade das culturas estudadas e dos microrganismos nativos em biodegradar óleo diesel comprado de um posto de combustíveis local, foi verificada utilizando-se a técnica baseada no indicador redox 2,6 - diclorofenol indofenol (DCPIP. Resultados obtidos com esse teste mostraram que os inóculos empregados nos experimentos de biodegradação foram capazes de biodegradar óleo diesel e os testes com os microrganismos nativos indicaram que estes solos

  2. Complementary testing techniques applied to obtain the freeze-thaw resistance of concrete

    Directory of Open Access Journals (Sweden)

    Romero, H. L.

    2015-03-01

    Full Text Available Most of the standards that evaluate the resistance of concrete against freeze-thaw cycles (FTC are based on the loss of weight due to scaling. Such procedures are useful but do not provide information about the microstructural deterioration of the concrete. The test procedure needs to be stopped after several FTCs for weighing the loss of material by scaling. This paper proposes the use of mercury-intrusion-porosimetry and thermogravimetric analysis for assessing the microstructural damage of concrete during FTCs. Continuous strain measurement can be performed without stopping the FTCs. The combination of the above techniques with the freeze-thaw resistance standards provides better and more precise information about concrete damage. The proposed procedure is applied to an ordinary concrete, a concrete with silica fume addition and one with an air-entraining agent. The test results showed that the three techniques used are suitable and useful to be employed as complementary to the standards.Las normas para evaluar la resistencia del hormigón a los ciclos hielo-deshielo (CHD se basan habitualmente en la pérdida de peso por descascarillamiento. Son útiles, pero no proporcionan información sobre el deterioro microestructural del hormigón. Además, exigen detener el ensayo para pesar el material desprendido. Se propone el uso complementario de la porosimetría por intrusión de mercurio y el análisis termogravimétrico para evaluar el daño microestructural del hormigón durante los CHDs. La medida continua de las deformaciones puede hacerse sin detener los CHDs. La combinación de las técnicas enumeradas con las normas de ensayo proporciona información más completa sobre el daño del hormigón. El procedimiento propuesto se aplica a un hormigón convencional, a un hormigón con adición de humo de sílice y a otro con aireante. Los resultados de los ensayos mostraron que las tres técnicas usadas son útiles y adecuadas como complemento a

  3. Chemistry of preparation of ceramic powders by sol-gel techniques

    OpenAIRE

    Schmidt, Helmut K.; Nass, Rüdiger; Ray, S.; Sporn, Dieter

    1988-01-01

    The sol-gel technique is a unique method for tailoring ceramic powders if the different reaction parameters can be controlled with respect to the powder properties. Reaction control can be achieved by control of hydrolysis and condensation, solvent, temperature, catalyst, additives and complex formers. Especially the use of complex formers have proved to be a successful mean with respect to the control of the gel structure, the generation of monosized particles and even the control of particl...

  4. Volatile organic compounds in the New England troposphere: Atmospheric chemistry and measurement techniques

    Science.gov (United States)

    Ambrose, Jesse L.

    Atmospheric measurements made at Appledore Island, Maine were used to investigate nighttime nitrate radical (NO3) chemistry and its significance for the nitrogen oxides (NOx = NO + NO2) budget in the Gulf of Maine region during the summer of 2004 International Consortium for Atmospheric Research on Transport and Transformation field campaign. Removal of NOx was strongly dependent on reactions of NO3 with biogenic volatile organic compounds and the fate of dinitrogen pentoxide (N 2O5). For three case studies, temporal profiles of NO 3 were calculated from measured parameters. Comparisons between measured and calculated NO3 mixing ratios highlighted significant uncertainties in the kinetic parameters governing gas-phase and heterogeneous N2O 5 hydrolysis. Removal of NOx was estimated to be ˜11 ppbv day-1, with nighttime chemical pathways contributing ˜50%. Atmospheric measurements made at the AIRMAP atmospheric monitoring station Thompson Farm (THF) during summer, 2004 were used to test the specificity of a proton transfer reaction-mass spectrometer (PTA-MS) for atmospheric toluene measurements under conditions often dominated by biogenic emissions. Quantitative estimates were made of potential interferences in the PTR-MS toluene measurements related to sampling and analysis of monoterpenes, including fragmentation of the monoterpenes and some of their primary carbonyl oxidation products in the PTR-MS drift tube. The analysis supported only minor interferences from the investigated fragmentation sources, suggesting that toluene can be reliably quantified by PTR-MS with the operating parameters used, under the ambient compositions probed. This work extends the range of field conditions under which PTR-MS validation studies have been conducted. A GC instrument was developed for measurement of hydrogen cyanide (HCN) in the lower atmosphere. Its major features include a cold temperature analyte enrichment system, a robust porous polymer stationary phase capillary

  5. Contributions of computational chemistry and biophysical techniques to fragment-based drug discovery.

    Science.gov (United States)

    Gozalbes, Rafael; Carbajo, Rodrigo J; Pineda-Lucena, Antonio

    2010-01-01

    In the last decade, fragment-based drug discovery (FBDD) has evolved from a novel approach in the search of new hits to a valuable alternative to the high-throughput screening (HTS) campaigns of many pharmaceutical companies. The increasing relevance of FBDD in the drug discovery universe has been concomitant with an implementation of the biophysical techniques used for the detection of weak inhibitors, e.g. NMR, X-ray crystallography or surface plasmon resonance (SPR). At the same time, computational approaches have also been progressively incorporated into the FBDD process and nowadays several computational tools are available. These stretch from the filtering of huge chemical databases in order to build fragment-focused libraries comprising compounds with adequate physicochemical properties, to more evolved models based on different in silico methods such as docking, pharmacophore modelling, QSAR and virtual screening. In this paper we will review the parallel evolution and complementarities of biophysical techniques and computational methods, providing some representative examples of drug discovery success stories by using FBDD.

  6. Quantum mechanics in chemistry

    CERN Document Server

    Schatz, George C

    2002-01-01

    Intended for graduate and advanced undergraduate students, this text explores quantum mechanical techniques from the viewpoint of chemistry and materials science. Dynamics, symmetry, and formalism are emphasized. An initial review of basic concepts from introductory quantum mechanics is followed by chapters examining symmetry, rotations, and angular momentum addition. Chapter 4 introduces the basic formalism of time-dependent quantum mechanics, emphasizing time-dependent perturbation theory and Fermi's golden rule. Chapter 5 sees this formalism applied to the interaction of radiation and matt

  7. Comparison of multivariate preprocessing techniques as applied to electronic tongue based pattern classification for black tea

    Energy Technology Data Exchange (ETDEWEB)

    Palit, Mousumi [Department of Electronics and Telecommunication Engineering, Central Calcutta Polytechnic, Kolkata 700014 (India); Tudu, Bipan, E-mail: bt@iee.jusl.ac.in [Department of Instrumentation and Electronics Engineering, Jadavpur University, Kolkata 700098 (India); Bhattacharyya, Nabarun [Centre for Development of Advanced Computing, Kolkata 700091 (India); Dutta, Ankur; Dutta, Pallab Kumar [Department of Instrumentation and Electronics Engineering, Jadavpur University, Kolkata 700098 (India); Jana, Arun [Centre for Development of Advanced Computing, Kolkata 700091 (India); Bandyopadhyay, Rajib [Department of Instrumentation and Electronics Engineering, Jadavpur University, Kolkata 700098 (India); Chatterjee, Anutosh [Department of Electronics and Communication Engineering, Heritage Institute of Technology, Kolkata 700107 (India)

    2010-08-18

    In an electronic tongue, preprocessing on raw data precedes pattern analysis and choice of the appropriate preprocessing technique is crucial for the performance of the pattern classifier. While attempting to classify different grades of black tea using a voltammetric electronic tongue, different preprocessing techniques have been explored and a comparison of their performances is presented in this paper. The preprocessing techniques are compared first by a quantitative measurement of separability followed by principle component analysis; and then two different supervised pattern recognition models based on neural networks are used to evaluate the performance of the preprocessing techniques.

  8. Comparison of multivariate preprocessing techniques as applied to electronic tongue based pattern classification for black tea.

    Science.gov (United States)

    Palit, Mousumi; Tudu, Bipan; Bhattacharyya, Nabarun; Dutta, Ankur; Dutta, Pallab Kumar; Jana, Arun; Bandyopadhyay, Rajib; Chatterjee, Anutosh

    2010-08-18

    In an electronic tongue, preprocessing on raw data precedes pattern analysis and choice of the appropriate preprocessing technique is crucial for the performance of the pattern classifier. While attempting to classify different grades of black tea using a voltammetric electronic tongue, different preprocessing techniques have been explored and a comparison of their performances is presented in this paper. The preprocessing techniques are compared first by a quantitative measurement of separability followed by principle component analysis; and then two different supervised pattern recognition models based on neural networks are used to evaluate the performance of the preprocessing techniques.

  9. Integration of Computational and Preparative Techniques to Demonstrate Physical Organic Concepts in Synthetic Organic Chemistry: An Example Using Diels-Alder Reaction

    Science.gov (United States)

    Palmer, David R. J.

    2004-01-01

    The Diels-Alder reaction is used as an example for showing the integration of computational and preparative techniques, which help in demonstrating the physical organic concepts in synthetic organic chemistry. These experiments show that the students should not accept the computational results without questioning them and in many Diels-Alder…

  10. A multiblock grid generation technique applied to a jet engine configuration

    Science.gov (United States)

    Stewart, Mark E. M.

    1992-01-01

    Techniques are presented for quickly finding a multiblock grid for a 2D geometrically complex domain from geometrical boundary data. An automated technique for determining a block decomposition of the domain is explained. Techniques for representing this domain decomposition and transforming it are also presented. Further, a linear optimization method may be used to solve the equations which determine grid dimensions within the block decomposition. These algorithms automate many stages in the domain decomposition and grid formation process and limit the need for human intervention and inputs. They are demonstrated for the meridional or throughflow geometry of a bladed jet engine configuration.

  11. Calorimetric techniques applied to the thermodynamic study of interactions between proteins and polysaccharides

    Directory of Open Access Journals (Sweden)

    Monique Barreto Santos

    2016-08-01

    Full Text Available ABSTRACT: The interactions between biological macromolecules have been important for biotechnology, but further understanding is needed to maximize the utility of these interactions. Calorimetric techniques provide information regarding these interactions through the thermal energy that is produced or consumed during interactions. Notable techniques include differential scanning calorimetry, which generates a thermodynamic profile from temperature scanning, and isothermal titration calorimetry that provide the thermodynamic parameters directly related to the interaction. This review described how calorimetric techniques can be used to study interactions between proteins and polysaccharides, and provided valuable insight into the thermodynamics of their interaction.

  12. Quantitative thoracic CT techniques in adults: can they be applied in the pediatric population?

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Soon Ho [Seoul National University Medical Research Center, Department of Radiology, Seoul National University College of Medicine, and Institute of Radiation Medicine, Seoul (Korea, Republic of); Goo, Jin Mo [Seoul National University Medical Research Center, Department of Radiology, Seoul National University College of Medicine, and Institute of Radiation Medicine, Seoul (Korea, Republic of); Seoul National University College of Medicine, Cancer Research Institute, Jongno-gu, Seoul (Korea, Republic of); Goo, Hyun Woo [University of Ulsan College of Medicine, Department of Radiology and Research Institute of Radiology, Asan Medical Center, Seoul (Korea, Republic of)

    2013-03-15

    With the rapid evolution of the multidetector row CT technique, quantitative CT has started to be used in clinical studies for revealing a heterogeneous entity of airflow limitation in chronic obstructive pulmonary disease that is caused by a combination of lung parenchymal destruction and remodeling of the small airways in adults. There is growing evidence of a good correlation between quantitative CT findings and pathological findings, pulmonary function test results and other clinical parameters. This article provides an overview of current quantitative thoracic CT techniques used in adults, and how to translate these CT techniques to the pediatric population. (orig.)

  13. Nde of Advanced Automotive Composite Materials that Apply Ultrasound Infrared Thermography Technique

    Science.gov (United States)

    Choi, Seung-Hyun; Park, Soo-Keun; Kim, Jae-Yeol

    The infrared thermographic nondestructive inspection technique is a quality inspection and stability assessment method used to diagnose the physical characteristics and defects by detecting the infrared ray radiated from the object without destructing it. Recently, the nondestructive inspection and assessment that use the ultrasound-infrared thermography technique are widely adopted in diverse areas. The ultrasound-infrared thermography technique uses the phenomenon that the ultrasound wave incidence to an object with cracks or defects on its mating surface generates local heat on the surface. The car industry increasingly uses composite materials for their lightweight, strength, and environmental resistance. In this study, the car piston passed through the ultrasound-infrared thermography technique for nondestructive testing, among the composite material car parts. This study also examined the effects of the frequency and power to optimize the nondestructive inspection.

  14. Flipped parameter technique applied on source localization in energy constraint sensor arrays

    OpenAIRE

    Pavlović Vlastimir D.; Veličković Zoran S.

    2009-01-01

    In this paper novel flipped parameter technique (FPT) for time delay estimation (TDE) in source localization problem is described. We propose passive source localization technique based on the development of an energy efficient algorithm that can reduce intersensor and interarray communication. We propose a flipped parameter (FP) which can be defined for any sensor in distributed sensor subarrays during the observation period. Unlike classical TDE methods that evaluate cross-correlation funct...

  15. Measurement of the magnitude of force applied by students when learning a mobilisation technique

    OpenAIRE

    Smit, E.; Conradie, M; Wessels, J.; I. Witbooi; Otto, R.

    2003-01-01

    Passive accessory intervertebral movements (PAIVM’s) are frequently used by physiotherapists in the  assessment and management of patients. Studies investigating the reliability of passive mobilisation techniques have shown conflicting results. Therefore, standardisation of PAIVM’s is essential for research and teaching purposes, which could result in better clinical management. In order to standardise graded passive mobilisation techniques, a reliable, easy-to-use, objective measurement tool...

  16. [The applying and foreground of quantifying DNA content by image analysis technique in determining postmortem interval].

    Science.gov (United States)

    Wang, Cheng-yi; Liu, Liang

    2002-02-01

    Image Analysis Technique(IAT) was developed at 1950's, which quantifies the changing all the part of image by sampling, processing, quantifying, computing, analyzing the information of image. And now it has become a normal quantifying technique in biology and medicine research. In the present paper, we reviewed briefly the principium of quantifying the DNA content by IAT, the law of degradation of DNA in nucleus and the foreground of this method in determining PMI in forensic pathology.

  17. Quantum chemistry

    CERN Document Server

    Lowe, John P

    1993-01-01

    Praised for its appealing writing style and clear pedagogy, Lowe's Quantum Chemistry is now available in its Second Edition as a text for senior undergraduate- and graduate-level chemistry students. The book assumes little mathematical or physical sophistication and emphasizes an understanding of the techniques and results of quantum chemistry, thus enabling students to comprehend much of the current chemical literature in which quantum chemical methods or concepts are used as tools. The book begins with a six-chapter introduction of standard one-dimensional systems, the hydrogen atom,

  18. Performance values for non destructive assay (NDA) techniques applied to safeguards: the 2002 evaluation by the ESARDA NDA Working Group

    International Nuclear Information System (INIS)

    The first evaluation of NDA performance values undertaken by the ESARDA Working Group for Standards and Non Destructive Assay Techniques (WGNDA) was published in 1993. Almost 10 years later the Working Group decided to review those values, to report about improvements and to issue new performance values for techniques which were not applied in the early nineties, or were at that time only emerging. Non-Destructive Assay techniques have become more and more important in recent years, and they are used to a large extent in nuclear material accountancy and control both by operators and control authorities. As a consequence, the performance evaluation for NDA techniques is of particular relevance to safeguards authorities in optimising Safeguards operations and reducing costs. Performance values are important also for NMAC regulators, to define detection levels, limits for anomalies, goal quantities and to negotiate basic audit rules. This paper presents the latest evaluation of ESARDA Performance Values (EPVs) for the most common NDA techniques currently used for the assay of nuclear materials for Safeguards purposes. The main topics covered by the document are: techniques for plutonium bearing materials: PuO2 and MOX; techniques for U-bearing materials; techniques for U and Pu in liquid form; techniques for spent fuel assay. This issue of the performance values is the result of specific international round robin exercises, field measurements and ad hoc experiments, evaluated and discussed in the ESARDA NDA Working Group. (author)

  19. Magnetic and dielectric interactions in nano zinc ferrite powder: Prepared by self-sustainable propellant chemistry technique

    International Nuclear Information System (INIS)

    The structural, magnetic and dielectric properties of nano zinc ferrite prepared by the propellant chemistry technique are studied. The PXRD measurement at room temperature reveal that the compound is in cubic spinel phase, belong to the space group Fd−3m. The unit cell parameters have been estimated from Rietveld refinement. The calculated force constants from FTIR spectrum corresponding to octahedral and tetrahedral sites at 375 and 542 cm−1 are 6.61×102 and 3.77×102 N m−1 respectively; these values are slightly higher compared to the other ferrite systems. Magnetic hysteresis and EPR spectra show superparamagnetic property nearly to room temperature due to comparison values between magnetic anisotropy energy and the thermal energy. The calculated values of saturation magnetization, remenant magnetization, coercive field and magnetic moment supports for the existence of multi domain particles in the sample. The temperature dependent magnetic field shows the spin freezing state at 30 K and the blocking temperature at above room temperature. The frequency dependent dielectric interactions show the variation of dielectric constant, dielectric loss and impedance as similar to other ferrite systems. The AC conductivity in the prepared sample is due to the presence of electrons, holes and polarons. The synthesized material is suitable for nano-electronics and biomedical applications. - Highlights: • Nano zinc ferrite compound has been prepared at much lower temperature. • Magnetic and dielectric interactions were reported at various temperatures. • Anisotropy and spin relaxation time were interrelated by magnetic and dielectrics

  20. Applying data mining techniques to medical time series: an empirical case study in electroencephalography and stabilometry.

    Science.gov (United States)

    Anguera, A; Barreiro, J M; Lara, J A; Lizcano, D

    2016-01-01

    One of the major challenges in the medical domain today is how to exploit the huge amount of data that this field generates. To do this, approaches are required that are capable of discovering knowledge that is useful for decision making in the medical field. Time series are data types that are common in the medical domain and require specialized analysis techniques and tools, especially if the information of interest to specialists is concentrated within particular time series regions, known as events. This research followed the steps specified by the so-called knowledge discovery in databases (KDD) process to discover knowledge from medical time series derived from stabilometric (396 series) and electroencephalographic (200) patient electronic health records (EHR). The view offered in the paper is based on the experience gathered as part of the VIIP project. Knowledge discovery in medical time series has a number of difficulties and implications that are highlighted by illustrating the application of several techniques that cover the entire KDD process through two case studies. This paper illustrates the application of different knowledge discovery techniques for the purposes of classification within the above domains. The accuracy of this application for the two classes considered in each case is 99.86% and 98.11% for epilepsy diagnosis in the electroencephalography (EEG) domain and 99.4% and 99.1% for early-age sports talent classification in the stabilometry domain. The KDD techniques achieve better results than other traditional neural network-based classification techniques. PMID:27293535

  1. Pulsed remote field eddy current technique applied to non-magnetic flat conductive plates

    Science.gov (United States)

    Yang, Binfeng; Zhang, Hui; Zhang, Chao; Zhang, Zhanbin

    2013-12-01

    Non-magnetic metal plates are widely used in aviation and industrial applications. The detection of cracks in thick plate structures, such as multilayered structures of aircraft fuselage, has been challenging in nondestructive evaluation societies. The remote field eddy current (RFEC) technique has shown advantages of deep penetration and high sensitivity to deeply buried anomalies. However, the RFEC technique is mainly used to evaluate ferromagnetic tubes. There are many problems that should be fixed before the expansion and application of this technique for the inspection of non-magnetic conductive plates. In this article, the pulsed remote field eddy current (PRFEC) technique for the detection of defects in non-magnetic conducting plates was investigated. First, the principle of the PRFEC technique was analysed, followed by the analysis of the differences between the detection of defects in ferromagnetic and non-magnetic plain structures. Three different models of the PRFEC probe were simulated using ANSYS. The location of the transition zone, defect detection sensitivity and the ability to detect defects in thick plates using three probes were analysed and compared. The simulation results showed that the probe with a ferrite core had the highest detecting ability. The conclusions derived from the simulation study were also validated by conducting experiments.

  2. Statistical learning techniques applied to epidemiology: a simulated case-control comparison study with logistic regression

    Directory of Open Access Journals (Sweden)

    Land Walker H

    2011-01-01

    Full Text Available Abstract Background When investigating covariate interactions and group associations with standard regression analyses, the relationship between the response variable and exposure may be difficult to characterize. When the relationship is nonlinear, linear modeling techniques do not capture the nonlinear information content. Statistical learning (SL techniques with kernels are capable of addressing nonlinear problems without making parametric assumptions. However, these techniques do not produce findings relevant for epidemiologic interpretations. A simulated case-control study was used to contrast the information embedding characteristics and separation boundaries produced by a specific SL technique with logistic regression (LR modeling representing a parametric approach. The SL technique was comprised of a kernel mapping in combination with a perceptron neural network. Because the LR model has an important epidemiologic interpretation, the SL method was modified to produce the analogous interpretation and generate odds ratios for comparison. Results The SL approach is capable of generating odds ratios for main effects and risk factor interactions that better capture nonlinear relationships between exposure variables and outcome in comparison with LR. Conclusions The integration of SL methods in epidemiology may improve both the understanding and interpretation of complex exposure/disease relationships.

  3. Flipped parameter technique applied on source localization in energy constraint sensor arrays

    Directory of Open Access Journals (Sweden)

    Pavlović Vlastimir D.

    2009-01-01

    Full Text Available In this paper novel flipped parameter technique (FPT for time delay estimation (TDE in source localization problem is described. We propose passive source localization technique based on the development of an energy efficient algorithm that can reduce intersensor and interarray communication. We propose a flipped parameter (FP which can be defined for any sensor in distributed sensor subarrays during the observation period. Unlike classical TDE methods that evaluate cross-correlation function, FPT requires evaluation based upon single sensor signal. The computed cross correlation between a signal and its analytic 'flipped' pair (flipped correlation is a smooth function which peak (time delay can be accurately detected. Flipped parameters are sufficient to determine all differential delays of the signals related to the same source. The flipped parameter technique can be used successfully in two-step methods of passive source localization with significantly less energy in comparison to the classic cross correlation. The use of FPT method is especially significant for the energy constrain distributed sensor subarrays. Using synthetic seismic signals, we illustrate the error of the source localization for classical and proposed method in the presence of noise. We demonstrate the performance improvement in noise environment of the proposed technique in comparison to the classic methods that use real signals. The proposed technique gives accurate results for both coherent and non-coherent signals.

  4. Energy saving techniques applied over a nation-wide mobile network

    DEFF Research Database (Denmark)

    Perez, Eva; Frank, Philipp; Micallef, Gilbert;

    2014-01-01

    Traffic carried over wireless networks has grown significantly in recent years and actual forecasts show that this trend is expected to continue. However, the rapid mobile data explosion and the need for higher data rates comes at a cost of increased complexity and energy consumption of the mobile...... on the energy consumption based on a nation-wide network of a leading European operator. By means of an extensive analysis, we show that with the proposed techniques significant energy savings can be realized....... networks. Although base station equipment is improving its energy efficiency by means of new power amplifiers and increased processing power, additional techniques are required to further reduce the energy consumption. In this paper, we evaluate different energy saving techniques and study their impact...

  5. Reformulation linearization technique based branch-and-reduce approach applied to regional water supply system planning

    Science.gov (United States)

    Lan, Fujun; Bayraksan, Güzin; Lansey, Kevin

    2016-03-01

    A regional water supply system design problem that determines pipe and pump design parameters and water flows over a multi-year planning horizon is considered. A non-convex nonlinear model is formulated and solved by a branch-and-reduce global optimization approach. The lower bounding problem is constructed via a three-pronged effort that involves transforming the space of certain decision variables, polyhedral outer approximations, and the Reformulation Linearization Technique (RLT). Range reduction techniques are employed systematically to speed up convergence. Computational results demonstrate the efficiency of the proposed algorithm; in particular, the critical role range reduction techniques could play in RLT based branch-and-bound methods. Results also indicate using reclaimed water not only saves freshwater sources but is also a cost-effective non-potable water source in arid regions. Supplemental data for this article can be accessed at http://dx.doi.org/10.1080/0305215X.2015.1016508.

  6. New Control Technique Applied in Dynamic Voltage Restorer for Voltage Sag Mitigation

    Directory of Open Access Journals (Sweden)

    Rosli Omar

    2010-01-01

    Full Text Available The Dynamic Voltage Restorer (DVR was a power electronics device that was able to compensate voltage sags on critical loads dynamically. The DVR consists of VSC, injection transformers, passive filters and energy storage (lead acid battery. By injecting an appropriate voltage, the DVR restores a voltage waveform and ensures constant load voltage. There were so many types of the control techniques being used in DVR for mitigating voltage sags. The efficiency of the DVR depends on the efficiency of the control technique involved in switching the inverter. Problem statement: Simulation and experimental investigation toward new algorithms development based on SVPWM. Understanding the nature of DVR and performance comparisons between the various controller technologies available. The proposed controller using space vector modulation techniques obtain higher amplitude modulation indexes if compared with conventional SPWM techniques. Moreover, space vector modulation techniques can be easily implemented using digital processors. Space vector PWM can produce about 15% higher output voltage than standard Sinusoidal PWM. Approach: The purpose of this research was to study the implementation of SVPWM in DVR. The proposed control algorithm was investigated through computer simulation by using PSCAD/EMTDC software. Results: From simulation and experimental results showed the effectiveness and efficiency of the proposed controller based on SVPWM in mitigating voltage sags in low voltage distribution systems. It was concluded that its controller also works well both in balance and unbalance conditions of voltages. Conclusion/Recommendations: The simulation and experimental results of a DVR using PSCAD/EMTDC software based on SVPWM technique showed clearly the performance of the DVR in mitigating voltage sags. The DVR operates without any difficulties to inject the appropriate voltage component to correct rapidly any anomaly in the supply voltage to keep the

  7. Effect of the reinforcement bar arrangement on the efficiency of electrochemical chloride removal technique applied to reinforced concrete structures

    Energy Technology Data Exchange (ETDEWEB)

    Garces, P. [Dpto. Ing. de la Construccion, Obras Publicas e Infraestructura Urbana, Universidad de Alicante. Apdo. 99, E-03080 Alicante (Spain)]. E-mail: pedro.garces@ua.es; Sanchez de Rojas, M.J. [Dpto. Ing. de la Construccion, Obras Publicas e Infraestructura Urbana, Universidad de Alicante. Apdo. 99, E-03080 Alicante (Spain); Climent, M.A. [Dpto. Ing. de la Construccion, Obras Publicas e Infraestructura Urbana, Universidad de Alicante. Apdo. 99, E-03080 Alicante (Spain)

    2006-03-15

    This paper reports on the research done to find out the effect that different bar arrangements may have on the efficiency of the electrochemical chloride removal (ECR) technique when applied to a reinforced concrete structural member. Five different types of bar arrangements were considered, corresponding to typical structural members such as columns (with single and double bar reinforcing), slabs, beams and footings. ECR was applied in several steps. We observe that the extraction efficiency depends on the reinforcing bar arrangement. A uniform layer set-up favours chloride extraction. Electrochemical techniques were also used to estimate the reinforcing bar corrosion states, as well as measure the corrosion potential, and instant corrosion rate based on the polarization resistance technique. After ECR treatment, a reduction in the corrosion levels is observed falling short of the depassivation threshold.

  8. U P1, an example for advanced techniques applied to high level activity dismantling

    International Nuclear Information System (INIS)

    The U P1 plant on the CEA Marcoule site was dedicated to the processing of spend fuels from the G1, G2 and G3 plutonium-producing reactors. This plant represents 20.000 m2 of workshops housing about 1000 hot cells. In 1998, a huge program for the dismantling and cleaning-up of the UP1 plant was launched. CEA has developed new techniques to face the complexity of the dismantling operations. These techniques include immersive virtual reality, laser cutting, a specific manipulator arm called MAESTRO and remote handling. (A.C.)

  9. Innovative vibration technique applied to polyurethane foam as a viable substitute for conventional fatigue testing

    Science.gov (United States)

    Peralta, Alexander; Just-Agosto, Frederick; Shafiq, Basir; Serrano, David

    2012-12-01

    Lifetime prediction using three-point bending (TPB) can at times be prohibitively time consuming and costly, whereas vibration testing at higher frequency may potentially save time and revenue. A vibration technique that obtains lifetimes that reasonably match those determined under flexural TPB fatigue is developed. The technique designs the specimen with a procedure based on shape optimization and finite element analysis. When the specimen is vibrated in resonance, a stress pattern that mimics the stress pattern observed under conventional TPB fatigue testing is obtained. The proposed approach was verified with polyurethane foam specimens, resulting in an average error of 4.5% when compared with TPB.

  10. Applied predictive analytics principles and techniques for the professional data analyst

    CERN Document Server

    Abbott, Dean

    2014-01-01

    Learn the art and science of predictive analytics - techniques that get results Predictive analytics is what translates big data into meaningful, usable business information. Written by a leading expert in the field, this guide examines the science of the underlying algorithms as well as the principles and best practices that govern the art of predictive analytics. It clearly explains the theory behind predictive analytics, teaches the methods, principles, and techniques for conducting predictive analytics projects, and offers tips and tricks that are essential for successful predictive mode

  11. Development of Characterization Techniques of Thermodynamic and Physical Properties Applied to the CO2-DMSO Mixture

    OpenAIRE

    Calvignac, Brice; Rodier, Elisabeth; Letourneau, Jean-Jacques; Fages, Jacques

    2009-01-01

    International audience This work is focused on the development of new characterization techniques of physical and thermodynamic properties. These techniques have been validated using the binary system DMSO-CO2 for which several studies of characterization have been well documented. We focused on the DMSO-rich phase and we carried out measurements of volumetric expansion, density, viscosity and CO2 solubility at 298.15, 308.15 and 313.15 K and pressures up to 9 MPa. The experimental procedu...

  12. Using Commercially Available Techniques to Make Organic Chemistry Representations Tactile and More Accessible to Students with Blindness or Low Vision

    Science.gov (United States)

    Supalo, Cary A.; Kennedy, Sean H.

    2014-01-01

    Organic chemistry courses can present major obstacles to access for students with blindness or low vision (BLV). In recent years, efforts have been made to represent organic chemistry concepts in tactile forms for blind students. These methodologies are described in this manuscript. Further work being done at Illinois State University is also…

  13. Wavelet Techniques Applied to Modeling Transitional/Turbulent Flows in Turbomachinery

    Science.gov (United States)

    1996-01-01

    Computer simulation is an essential part of the design and development of jet engines for the aeropropulsion industry. Engineers concerned with calculating the flow in jet engine components, such as compressors and turbines, need simple engineering models that accurately describe the complex flow of air and gases and that allow them to quickly estimate loads, losses, temperatures, and other design parameters. In this ongoing collaborative project, advanced wavelet analysis techniques are being used to gain insight into the complex flow phenomena. These insights, which cannot be achieved by commonly used methods, are being used to develop innovative new flow models and to improve existing ones. Wavelet techniques are very suitable for analyzing the complex turbulent and transitional flows pervasive in jet engines. These flows are characterized by intermittency and a multitude of scales. Wavelet analysis results in information about these scales and their locations. The distribution of scales is equivalent to the frequency spectrum provided by commonly used Fourier analysis techniques; however, no localization information is provided by Fourier analysis. In addition, wavelet techniques allow conditional sampling analyses of the individual scales, which is not possible by Fourier methods.

  14. X-ray micro-beam techniques and phase contrast tomography applied to biomaterials

    Science.gov (United States)

    Fratini, Michela; Campi, Gaetano; Bukreeva, Inna; Pelliccia, Daniele; Burghammer, Manfred; Tromba, Giuliana; Cancedda, Ranieri; Mastrogiacomo, Maddalena; Cedola, Alessia

    2015-12-01

    A deeper comprehension of the biomineralization (BM) process is at the basis of tissue engineering and regenerative medicine developments. Several in-vivo and in-vitro studies were dedicated to this purpose via the application of 2D and 3D diagnostic techniques. Here, we develop a new methodology, based on different complementary experimental techniques (X-ray phase contrast tomography, micro-X-ray diffraction and micro-X-ray fluorescence scanning technique) coupled to new analytical tools. A qualitative and quantitative structural investigation, from the atomic to the micrometric length scale, is obtained for engineered bone tissues. The high spatial resolution achieved by X-ray scanning techniques allows us to monitor the bone formation at the first-formed mineral deposit at the organic-mineral interface within a porous scaffold. This work aims at providing a full comprehension of the morphology and functionality of the biomineralization process, which is of key importance for developing new drugs for preventing and healing bone diseases and for the development of bio-inspired materials.

  15. Review of Intelligent Techniques Applied for Classification and Preprocessing of Medical Image Data

    Directory of Open Access Journals (Sweden)

    H S Hota

    2013-01-01

    Full Text Available Medical image data like ECG, EEG and MRI, CT-scan images are the most important way to diagnose disease of human being in precise way and widely used by the physician. Problem can be clearly identified with the help of these medical images. A robust model can classify the medical image data in better way .In this paper intelligent techniques like neural network and fuzzy logic techniques are explored for MRI medical image data to identify tumor in human brain. Also need of preprocessing of medical image data is explored. Classification technique has been used extensively in the field of medical imaging. The conventional method in medical science for medical image data classification is done by human inspection which may result misclassification of data sometime this type of problem identification are impractical for large amounts of data and noisy data, a noisy data may be produced due to some technical fault of the machine or by human errors and can lead misclassification of medical image data. We have collected number of papers based on neural network and fuzzy logic along with hybrid technique to explore the efficiency and robustness of the model for brain MRI data. It has been analyzed that intelligent model along with data preprocessing using principal component analysis (PCA and segmentation may be the competitive model in this domain.

  16. Study of Phase Reconstruction Techniques applied to Smith-Purcell Radiation Measurements

    CERN Document Server

    Delerue, Nicolas; Vieille-Grosjean, Mélissa; Bezshyyko, Oleg; Khodnevych, Vitalii

    2014-01-01

    Measurements of coherent radiation at accelerators typically give the absolute value of the beam profile Fourier transform but not its phase. Phase reconstruction techniques such as Hilbert transform or Kramers Kronig reconstruction are used to recover such phase. We report a study of the performances of these methods and how to optimize the reconstructed profiles.

  17. Study of Phase Reconstruction Techniques applied to Smith-Purcell Radiation Measurements

    CERN Document Server

    Delerue, Nicolas; Bezshyyko, Oleg; Khodnevych, Vitalii

    2015-01-01

    Measurements of coherent radiation at accelerators typically give the absolute value of the beam profile Fourier transform but not its phase. Phase reconstruction techniques such as Hilbert transform or Kramers Kronig reconstruction are used to recover such phase. We report a study of the performances of these methods and how to optimize the reconstructed profiles.

  18. Applied Statistics: From Bivariate through Multivariate Techniques [with CD-ROM

    Science.gov (United States)

    Warner, Rebecca M.

    2007-01-01

    This book provides a clear introduction to widely used topics in bivariate and multivariate statistics, including multiple regression, discriminant analysis, MANOVA, factor analysis, and binary logistic regression. The approach is applied and does not require formal mathematics; equations are accompanied by verbal explanations. Students are asked…

  19. Do trained practice nurses apply motivational interviewing techniques in primary care consultations?

    NARCIS (Netherlands)

    Noordman, J.; Lee, I. van der; Nielen, M.; Vlek, H.; Weijden, T. van der; Dulmen, S. van

    2012-01-01

    Background: Reducing the prevalence of unhealthy lifestyle behaviour could positively influence health. Motivational interviewing (MI) is used to promote change in unhealthy lifestyle behaviour as part of primary or secondary prevention. Whether MI is actually applied as taught is unknown. Practice

  20. Do trained practice nurses apply motivational interviewing techniques in primary care consultations?

    NARCIS (Netherlands)

    Noordman, J.; Lee, I. van; Nielen, M.; Vlek, H.; Weijden, T. van; Dulmen, S. van

    2012-01-01

    BACKGROUND: Reducing the prevalence of unhealthy lifestyle behaviour could positively influence health. Motivational interviewing (MI) is used to promote change in unhealthy lifestyle behaviour as part of primary or secondary prevention. Whether MI is actually applied as taught is unknown. Practice

  1. Applying the Management-by-Objectives Technique in an Industrial Library

    Science.gov (United States)

    Stanton, Robert O.

    1975-01-01

    An experimental "management-by-objectives" performance system was operated by the Libraries and Information Systems Center of Bell Laboratories during 1973. It was found that, though the system was very effective for work planning and the development of people, difficulties were encountered in applying it to certain classes of employees. (Author)

  2. Time-lapse motion picture technique applied to the study of geological processes

    Science.gov (United States)

    Miller, R.D.; Crandell, D.R.

    1959-01-01

    Light-weight, battery-operated timers were built and coupled to 16-mm motion-picture cameras having apertures controlled by photoelectric cells. The cameras were placed adjacent to Emmons Glacier on Mount Rainier. The film obtained confirms the view that exterior time-lapse photography can be applied to the study of slow-acting geologic processes.

  3. Magnetic resonance techniques applied to the diagnosis and treatment of Parkinson’s disease

    Directory of Open Access Journals (Sweden)

    Benito eDe Celis Alonso

    2015-07-01

    Full Text Available Parkinson’s disease affects at least 10 million people worldwide. It is a neurodegenerative disease which is currently diagnosed by neurological examination. No neuroimaging investigation or blood biomarker is available to aid diagnosis and prognosis. Most effort toward diagnosis using magnetic resonance has been focused on the use of structural/anatomical neuroimaging and diffusion tensor imaging. However, deep brain stimulation, a current strategy for treating Parkinson’s disease, is guided by magnetic resonance imaging. For clinical prognosis, diagnosis and follow-up investigations, blood oxygen level–dependent magnetic resonance imaging, diffusion tensor imaging, spectroscopy and transcranial magnetic stimulation have been used. These techniques represent the state of the art in the last five years. Here, we focus on magnetic resonance techniques for the diagnosis and treatment of Parkinson’s disease.

  4. Modelling laser speckle photographs of decayed teeth by applying a digital image information technique

    Science.gov (United States)

    Ansari, M. Z.; da Silva, L. C.; da Silva, J. V. P.; Deana, A. M.

    2016-09-01

    We report on the application of a digital image model to assess early carious lesions on teeth. When decay is in its early stages, the lesions were illuminated with a laser and the laser speckle images were obtained. Due to the differences in the optical properties between healthy and carious tissue, both regions produced different scatter patterns. The digital image information technique allowed us to produce colour-coded 3D surface plots of the intensity information in the speckle images, where the height (on the z-axis) and the colour in the rendering correlate with the intensity of a pixel in the image. The quantitative changes in colour component density enhance the contrast between the decayed and sound tissue, and visualization of the carious lesions become significantly evident. Therefore, the proposed technique may be adopted in the early diagnosis of carious lesions.

  5. Magnetic Resonance Techniques Applied to the Diagnosis and Treatment of Parkinson’s Disease

    Science.gov (United States)

    de Celis Alonso, Benito; Hidalgo-Tobón, Silvia S.; Menéndez-González, Manuel; Salas-Pacheco, José; Arias-Carrión, Oscar

    2015-01-01

    Parkinson’s disease (PD) affects at least 10 million people worldwide. It is a neurodegenerative disease, which is currently diagnosed by neurological examination. No neuroimaging investigation or blood biomarker is available to aid diagnosis and prognosis. Most effort toward diagnosis using magnetic resonance (MR) has been focused on the use of structural/anatomical neuroimaging and diffusion tensor imaging (DTI). However, deep brain stimulation, a current strategy for treating PD, is guided by MR imaging (MRI). For clinical prognosis, diagnosis, and follow-up investigations, blood oxygen level-dependent MRI, DTI, spectroscopy, and transcranial magnetic stimulation have been used. These techniques represent the state of the art in the last 5 years. Here, we focus on MR techniques for the diagnosis and treatment of Parkinson’s disease. PMID:26191037

  6. Wavelet-based Adaptive Techniques Applied to Turbulent Hypersonic Scramjet Intake Flows

    CERN Document Server

    Frauholz, Sarah; Reinartz, Birgit U; Müller, Siegfried; Behr, Marek

    2013-01-01

    The simulation of hypersonic flows is computationally demanding due to large gradients of the flow variables caused by strong shock waves and thick boundary or shear layers. The resolution of those gradients imposes the use of extremely small cells in the respective regions. Taking turbulence into account intensives the variation in scales even more. Furthermore, hypersonic flows have been shown to be extremely grid sensitive. For the simulation of three-dimensional configurations of engineering applications, this results in a huge amount of cells and prohibitive computational time. Therefore, modern adaptive techniques can provide a gain with respect to computational costs and accuracy, allowing the generation of locally highly resolved flow regions where they are needed and retaining an otherwise smooth distribution. An h-adaptive technique based on wavelets is employed for the solution of hypersonic flows. The compressible Reynolds averaged Navier-Stokes equations are solved using a differential Reynolds s...

  7. Applying Data Mining Technique For The Optimal Usage Of Neonatal Incubator

    Directory of Open Access Journals (Sweden)

    Hagar Fady

    2012-07-01

    Full Text Available This research aims to provide intelligent tool to predict incubator Length of Stay (LOS of infants which shall increase the utilization and management of infant incubators. The data sets of Egyptian Neonatal Network (EGNN were employed and Oracle Data Miner (ODM tool was used for the analysis and prediction of data. The obtained results indicated that data mining technique is an appropriate and sufficiently sensitive method to predict required LOS of premature and ill infant.

  8. The radiation techniques of tomotherapy & intensity-modulated radiation therapy applied to lung cancer

    OpenAIRE

    Zhu, Zhengfei; Fu, Xiaolong

    2015-01-01

    Radiotherapy (RT) plays an important role in the management of lung cancer. Development of radiation techniques is a possible way to improve the effect of RT by reducing toxicities through better sparing the surrounding normal tissues. This article will review the application of two forms of intensity-modulated radiation therapy (IMRT), fixed-field IMRT and helical tomotherapy (HT) in lung cancer, including dosimetric and clinical studies. The advantages and potential disadvantages of these t...

  9. Vibrational techniques applied to photosynthesis: Resonance Raman and fluorescence line-narrowing.

    Science.gov (United States)

    Gall, Andrew; Pascal, Andrew A; Robert, Bruno

    2015-01-01

    Resonance Raman spectroscopy may yield precise information on the conformation of, and the interactions assumed by, the chromophores involved in the first steps of the photosynthetic process. Selectivity is achieved via resonance with the absorption transition of the chromophore of interest. Fluorescence line-narrowing spectroscopy is a complementary technique, in that it provides the same level of information (structure, conformation, interactions), but in this case for the emitting pigment(s) only (whether isolated or in an ensemble of interacting chromophores). The selectivity provided by these vibrational techniques allows for the analysis of pigment molecules not only when they are isolated in solvents, but also when embedded in soluble or membrane proteins and even, as shown recently, in vivo. They can be used, for instance, to relate the electronic properties of these pigment molecules to their structure and/or the physical properties of their environment. These techniques are even able to follow subtle changes in chromophore conformation associated with regulatory processes. After a short introduction to the physical principles that govern resonance Raman and fluorescence line-narrowing spectroscopies, the information content of the vibrational spectra of chlorophyll and carotenoid molecules is described in this article, together with the experiments which helped in determining which structural parameter(s) each vibrational band is sensitive to. A selection of applications is then presented, in order to illustrate how these techniques have been used in the field of photosynthesis, and what type of information has been obtained. This article is part of a Special Issue entitled: Vibrational spectroscopies and bioenergetic systems. PMID:25268562

  10. Geostatistical techniques applied to mapping limnological variables and quantify the uncertainty associated with estimates

    Directory of Open Access Journals (Sweden)

    Cristiano Cigagna

    2015-12-01

    Full Text Available Abstract Aim: This study aimed to map the concentrations of limnological variables in a reservoir employing semivariogram geostatistical techniques and Kriging estimates for unsampled locations, as well as the uncertainty calculation associated with the estimates. Methods: We established twenty-seven points distributed in a regular mesh for sampling. Then it was determined the concentrations of chlorophyll-a, total nitrogen and total phosphorus. Subsequently, a spatial variability analysis was performed and the semivariogram function was modeled for all variables and the variographic mathematical models were established. The main geostatistical estimation technique was the ordinary Kriging. The work was developed with the estimate of a heavy grid points for each variables that formed the basis of the interpolated maps. Results: Through the semivariogram analysis was possible to identify the random component as not significant for the estimation process of chlorophyll-a, and as significant for total nitrogen and total phosphorus. Geostatistical maps were produced from the Kriging for each variable and the respective standard deviations of the estimates calculated. These measurements allowed us to map the concentrations of limnological variables throughout the reservoir. The calculation of standard deviations provided the quality of the estimates and, consequently, the reliability of the final product. Conclusions: The use of the Kriging statistical technique to estimate heavy mesh points associated with the error dispersion (standard deviation of the estimate, made it possible to make quality and reliable maps of the estimated variables. Concentrations of limnological variables in general were higher in the lacustrine zone and decreased towards the riverine zone. The chlorophyll-a and total nitrogen correlated comparing the grid generated by Kriging. Although the use of Kriging is more laborious compared to other interpolation methods, this

  11. Improving throughput and user experience for information intensive websites by applying HTTP compression technique.

    Science.gov (United States)

    Malla, Ratnakar

    2008-11-06

    HTTP compression is a technique specified as part of the W3C HTTP 1.0 standard. It allows HTTP servers to take advantage of GZIP compression technology that is built into latest browsers. A brief survey of medical informatics websites show that compression is not enabled. With compression enabled, downloaded files sizes are reduced by more than 50% and typical transaction time is also reduced from 20 to 8 minutes, thus providing a better user experience.

  12. Applying the sterile insect technique to the control of insect pests

    International Nuclear Information System (INIS)

    The sterile insect technique involves the mass-rearing of insects, which are sterilized by gamma rays from a 60Co source before being released in a controlled fashion into nature. Matings between the sterile insects released and native insects produce no progeny, and so if enough of these matings occur the pest population can be controlled or even eradicated. A modification of the technique, especially suitable for the suppression of the moths and butterflies, is called the F, or inherited sterility method. In this, lower radiation doses are used such that the released males are only partially sterile (30-60%) and the females are fully sterile. When released males mate with native females some progeny are produced, but they are completely sterile. Thus, full expression of the sterility is delayed by one generation. This article describes the use of the sterile insect technique in controlling the screwworm fly, the tsetse fly, the medfly, the pink bollworm and the melon fly, and of the F1 sterility method in the eradication of local gypsy moth infestations. 18 refs, 5 figs, 1 tab

  13. Quantification of material slippage in the iliotibial tract when applying the partial plastination clamping technique.

    Science.gov (United States)

    Sichting, Freddy; Steinke, Hanno; Wagner, Martin F-X; Fritsch, Sebastian; Hädrich, Carsten; Hammer, Niels

    2015-09-01

    The objective of this study was to evaluate the potential of the partial plastination technique in minimizing material slippage and to discuss the effects on the tensile properties of thin dense connective tissue. The ends of twelve iliotibial tract samples were primed with polyurethane resin and covered by plastic plates to provide sufficient grip between the clamps. The central part of the samples remained in an anatomically unfixed condition. Strain data of twelve partially plastinated samples and ten samples in a completely anatomically unfixed state were obtained using uniaxial crosshead displacement and an optical image tracking technique. Testing of agreement between the strain data revealed ongoing but markedly reduced material slippage in partially plastinated samples compared to the unfixed samples. The mean measurement error introduced by material slippage was up to 18.0% in partially plastinated samples. These findings might complement existing data on measurement errors during material testing and highlight the importance of individual quantitative evaluation of errors that come along with self-made clamping techniques. PMID:26005842

  14. IPR techniques applied to a multimedia environment in the HYPERMEDIA project

    Science.gov (United States)

    Munoz, Alberto; Ribagorda, Arturo; Sierra, Jose M.

    1999-04-01

    Watermarking techniques have been proved as a good method to protect intellectual copyrights in digital formats. But the simplicity for processing information supplied by digital platforms also offers many chances for eliminating marks embedded in the data due to the wide variety of techniques to modify information in digital formats. This paper analyzes a selection of the most interesting methods for image watermarking in order to test its qualities. The comparison of these watermarking techniques has shown new interesting lines of work. Some changes and extensions to these methods are proposed to increase its robustness against some usual attacks and specific watermark attacks. This works has been realized in order to provide the HYPERMEDIA project with an efficient tool for protecting IPR. The objective of this project is to establish an experimental stage on continuous multimedia material (audiovisuals) handling and delivering in a multimedia service environment, allowing the user to navigate in the hyperspace through database which belong to actors of the service chain and protecting IPR of authors or owners.

  15. Applying Data-mining techniques to study drought periods in Spain

    Science.gov (United States)

    Belda, F.; Penades, M. C.

    2010-09-01

    Data-mining is a technique that it can be used to interact with large databases and to help in the discovery relations between parameters by extracting information from massive and multiple data archives. Drought affects many economic and social sectors, from agricultural to transportation, going through urban water deficit and the development of modern industries. With these problems and drought geographical and temporal distribution it's difficult to find a single definition of drought. Improving the understanding of the knowledge of climatic index is necessary to reduce the impacts of drought and to facilitate quick decisions regarding this problem. The main objective is to analyze drought periods from 1950 to 2009 in Spain. We use several kinds of information, different formats, sources and transmission mode. We use satellite-based Vegetation Index, dryness index for several temporal periods. We use daily and monthly precipitation and temperature data and soil moisture data from numerical weather model. We calculate mainly Standardized Precipitation Index (SPI) that it has been used amply in the bibliography. We use OLAP-Mining techniques to discovery of association rules between remote-sensing, numerical weather model and climatic index. Time series Data- Mining techniques organize data as a sequence of events, with each event having a time of recurrence, to cluster the data into groups of records or cluster with similar characteristics. Prior climatological classification is necessary if we want to study drought periods over all Spain.

  16. An efficient permeability scaling-up technique applied to the discretized flow equations

    Energy Technology Data Exchange (ETDEWEB)

    Urgelli, D.; Ding, Yu [Institut Francais du Petrole, Rueil Malmaison (France)

    1997-08-01

    Grid-block permeability scaling-up for numerical reservoir simulations has been discussed for a long time in the literature. It is now recognized that a full permeability tensor is needed to get an accurate reservoir description at large scale. However, two major difficulties are encountered: (1) grid-block permeability cannot be properly defined because it depends on boundary conditions; (2) discretization of flow equations with a full permeability tensor is not straightforward and little work has been done on this subject. In this paper, we propose a new method, which allows us to get around both difficulties. As the two major problems are closely related, a global approach will preserve the accuracy. So, in the proposed method, the permeability up-scaling technique is integrated in the discretized numerical scheme for flow simulation. The permeability is scaled-up via the transmissibility term, in accordance with the fluid flow calculation in the numerical scheme. A finite-volume scheme is particularly studied, and the transmissibility scaling-up technique for this scheme is presented. Some numerical examples are tested for flow simulation. This new method is compared with some published numerical schemes for full permeability tensor discretization where the full permeability tensor is scaled-up through various techniques. Comparing the results with fine grid simulations shows that the new method is more accurate and more efficient.

  17. A neuro-evolutive technique applied for predicting the liquid crystalline property of some organic compounds

    Science.gov (United States)

    Drăgoi, Elena-Niculina; Curteanu, Silvia; Lisa, Cătălin

    2012-10-01

    A simple self-adaptive version of the differential evolution algorithm was applied for simultaneous architectural and parametric optimization of feed-forward neural networks, used to classify the crystalline liquid property of a series of organic compounds. The developed optimization methodology was called self-adaptive differential evolution neural network (SADE-NN) and has the following characteristics: the base vector used is chosen as the best individual in the current population, two differential terms participate in the mutation process, the crossover type is binomial, a simple self-adaptive mechanism is employed to determine the near-optimal control parameters of the algorithm, and the integration of the neural network into the differential evolution algorithm is performed using a direct encoding scheme. It was found that a network with one hidden layer is able to make accurate predictions, indicating that the proposed methodology is efficient and, owing to its flexibility, it can be applied to a large range of problems.

  18. A Reinforcement Plate for Partially Thinned Pressure Vessel Designed to Measure the Thickness of Vessel Wall Applying Ultrasonic Technique

    International Nuclear Information System (INIS)

    It is very hard to preserve the wall thickness of the vessel because of the erosion or corrosion as time goes by. Therefore, the wall thicknesses of heaters in power plants are periodically measured using ultrasonic test. If the integrity of the wall thickness is estimated not to secure, the reinforcement plate is welled on the thinned area of the vessel. The overlay weld of the reinforcement plate on the thinned vessel is normally the fillet welding. As shown by the references, the reinforcement plate with adequate thickness does its role very well before the vessel wall is perforated due to thinning. However, the integrity of shell cannot insure because the weldment is directly applied by the shell side pressure to after the vessel wall is perforated. Therefore, it is needed to measure the thickness of thinned area under the reinforcement plate continuously for preserving integrity and planning the fabrication of replacement vessel. It is impossible to apply the ultrasonic thickness measurement technique after the reinforcement plate is welded on the shell. In this paper new reinforcement plate, which makes it possible to measure the wall thickness under the reinforcement plate applying the ultrasonic technique, is introduced. A method to evaluate the structural integrity of a fillet weldment for the reinforcement plate welded on a pressure vessel is introduced in this paper. Moreover, new reinforcement plate, which makes it possible to measure the wall thickness of pressure vessels under the reinforcement plate applying the ultrasonic technique, is introduced

  19. Towards Applying Text Mining Techniques on Software Quality Standards and Models

    OpenAIRE

    Kelemen, Zádor Dániel; Kusters, Rob; Trienekens, Jos; Balla, Katalin

    2013-01-01

    Many of quality approaches are described in hundreds of textual pages. Manual processing of information consumes plenty of resources. In this report we present a text mining approach applied on CMMI, one well known and widely known quality approach. The text mining analysis can provide a quick overview on the scope of a quality approaches. The result of the analysis could accelerate the understanding and the selection of quality approaches.

  20. Assessment of ground-based monitoring techniques applied to landslide investigations

    Science.gov (United States)

    Uhlemann, S.; Smith, A.; Chambers, J.; Dixon, N.; Dijkstra, T.; Haslam, E.; Meldrum, P.; Merritt, A.; Gunn, D.; Mackay, J.

    2016-01-01

    A landslide complex in the Whitby Mudstone Formation at Hollin Hill, North Yorkshire, UK is periodically re-activated in response to rainfall-induced pore-water pressure fluctuations. This paper compares long-term measurements (i.e., 2009-2014) obtained from a combination of monitoring techniques that have been employed together for the first time on an active landslide. The results highlight the relative performance of the different techniques, and can provide guidance for researchers and practitioners for selecting and installing appropriate monitoring techniques to assess unstable slopes. Particular attention is given to the spatial and temporal resolutions offered by the different approaches that include: Real Time Kinematic-GPS (RTK-GPS) monitoring of a ground surface marker array, conventional inclinometers, Shape Acceleration Arrays (SAA), tilt meters, active waveguides with Acoustic Emission (AE) monitoring, and piezometers. High spatial resolution information has allowed locating areas of stability and instability across a large slope. This has enabled identification of areas where further monitoring efforts should be focused. High temporal resolution information allowed the capture of 'S'-shaped slope displacement-time behaviour (i.e. phases of slope acceleration, deceleration and stability) in response to elevations in pore-water pressures. This study shows that a well-balanced suite of monitoring techniques that provides high temporal and spatial resolutions on both measurement and slope scale is necessary to fully understand failure and movement mechanisms of slopes. In the case of the Hollin Hill landslide it enabled detailed interpretation of the geomorphological processes governing landslide activity. It highlights the benefit of regularly surveying a network of GPS markers to determine areas for installation of movement monitoring techniques that offer higher resolution both temporally and spatially. The small sensitivity of tilt meter measurements

  1. Enhanced nonlinear iterative techniques applied to a non-equilibrium plasma flow

    Energy Technology Data Exchange (ETDEWEB)

    Knoll, D.A.; McHugh, P.R. [Idaho National Engineering Lab., Idaho Falls, ID (United States)

    1996-12-31

    We study the application of enhanced nonlinear iterative methods to the steady-state solution of a system of two-dimensional convection-diffusion-reaction partial differential equations that describe the partially-ionized plasma flow in the boundary layer of a tokamak fusion reactor. This system of equations is characterized by multiple time and spatial scales, and contains highly anisotropic transport coefficients due to a strong imposed magnetic field. We use Newton`s method to linearize the nonlinear system of equations resulting from an implicit, finite volume discretization of the governing partial differential equations, on a staggered Cartesian mesh. The resulting linear systems are neither symmetric nor positive definite, and are poorly conditioned. Preconditioned Krylov iterative techniques are employed to solve these linear systems. We investigate both a modified and a matrix-free Newton-Krylov implementation, with the goal of reducing CPU cost associated with the numerical formation of the Jacobian. A combination of a damped iteration, one-way multigrid and a pseudo-transient continuation technique are used to enhance global nonlinear convergence and CPU efficiency. GMRES is employed as the Krylov method with Incomplete Lower-Upper(ILU) factorization preconditioning. The goal is to construct a combination of nonlinear and linear iterative techniques for this complex physical problem that optimizes trade-offs between robustness, CPU time, memory requirements, and code complexity. It is shown that a one-way multigrid implementation provides significant CPU savings for fine grid calculations. Performance comparisons of the modified Newton-Krylov and matrix-free Newton-Krylov algorithms will be presented.

  2. Zero order and signal processing spectrophotometric techniques applied for resolving interference of metronidazole with ciprofloxacin in their pharmaceutical dosage form.

    Science.gov (United States)

    Attia, Khalid A M; Nassar, Mohammed W I; El-Zeiny, Mohamed B; Serag, Ahmed

    2016-02-01

    Four rapid, simple, accurate and precise spectrophotometric methods were used for the determination of ciprofloxacin in the presence of metronidazole as interference. The methods under study are area under the curve, simultaneous equation in addition to smart signal processing techniques of manipulating ratio spectra namely Savitsky-Golay filters and continuous wavelet transform. All the methods were validated according to the ICH guidelines where accuracy, precision and repeatability were found to be within the acceptable limits. The selectivity of the proposed methods was tested using laboratory prepared mixtures and assessed by applying the standard addition technique. So, they can therefore be used for the routine analysis of ciprofloxacin in quality-control laboratories.

  3. Zero order and signal processing spectrophotometric techniques applied for resolving interference of metronidazole with ciprofloxacin in their pharmaceutical dosage form

    Science.gov (United States)

    Attia, Khalid A. M.; Nassar, Mohammed W. I.; El-Zeiny, Mohamed B.; Serag, Ahmed

    2016-02-01

    Four rapid, simple, accurate and precise spectrophotometric methods were used for the determination of ciprofloxacin in the presence of metronidazole as interference. The methods under study are area under the curve, simultaneous equation in addition to smart signal processing techniques of manipulating ratio spectra namely Savitsky-Golay filters and continuous wavelet transform. All the methods were validated according to the ICH guidelines where accuracy, precision and repeatability were found to be within the acceptable limits. The selectivity of the proposed methods was tested using laboratory prepared mixtures and assessed by applying the standard addition technique. So, they can therefore be used for the routine analysis of ciprofloxacin in quality-control laboratories.

  4. Evaluation of Bending Strength in Friction Welded Alumina/mild Steel Joints by Applying Factorial Technique

    Science.gov (United States)

    Jesudoss Hynes, N. Rajesh; Nagaraj, P.; Vivek Prabhu, M.

    Joining of metal with ceramics has become significant in many applications, because they combine properties like ductility with high hardness and wear resistance. By friction welding technique, alumina can be joined to mild steel with AA1100 sheet of 1mm thickness as interlayer. In the present work, investigation of the effect of friction time on interlayer thickness reduction and bending strength is carried out by factorial design. By using ANOVA, a statistical tool, regression modeling is done. The regression model predicts the bending strength of welded ceramic/metal joints accurately with ± 2% deviation from the experimental values.

  5. Full-field speckle correlation technique as applied to blood flow monitoring

    Science.gov (United States)

    Vilensky, M. A.; Agafonov, D. N.; Timoshina, P. A.; Shipovskaya, O. V.; Zimnyakov, D. A.; Tuchin, V. V.; Novikov, P. A.

    2011-03-01

    The results of experimental study of monitoring the microcirculation in tissue superficial layers of the internal organs at gastro-duodenal hemorrhage with the use of laser speckles contrast analysis technique are presented. The microcirculation monitoring was provided in the course of the laparotomy of rat abdominal cavity in the real time. Microscopic hemodynamics was analyzed for small intestine and stomach under different conditions (normal state, provoked ischemia, administration of vasodilative agents such as papaverine, lidocaine). The prospects and problems of internal monitoring of micro-vascular flow in clinical conditions are discussed.

  6. Photon Counting Optical Time Domain Reflectometry Applying a Single Photon Modulation Technique

    Institute of Scientific and Technical Information of China (English)

    WANG Xiao-Bo; WANG Jing-Jing; HE Bo; XIAO Lian-Tuan; JIA Suo-Tang

    2011-01-01

    Photon-counting optical time domain reflectometry (v-OTDR) is typically used in a mode with spatial resolution in the centimeter range.Here we demonstrate a 1550 nm v-OTDR system to optimize the discriminate voltage of a single photon avalanche detector using a single photon modulation and demodulation technique,which shows obvious improvement in the signal intensity.The intensity of signal is doubled when the discriminator voltage is optimized from 184mV to 162mV.

  7. Optimization techniques applied to passive measures for in-orbit spacecraft survivability

    Science.gov (United States)

    Mog, Robert A.; Helba, Michael J.; Hill, Janeil B.

    1992-01-01

    The purpose of this research is to provide Space Station Freedom protective structures design insight through the coupling of design/material requirements, hypervelocity impact phenomenology, meteoroid and space debris environment sensitivities, optimization techniques and operations research strategies, and mission scenarios. The goals of the research are: (1) to develop a Monte Carlo simulation tool which will provide top level insight for Space Station protective structures designers; (2) to develop advanced shielding concepts relevant to Space Station Freedom using unique multiple bumper approaches; and (3) to investigate projectile shape effects on protective structures design.

  8. Nuclear analytical techniques applied to characterization of atmospheric aerosols in Amazon Region

    International Nuclear Information System (INIS)

    This work presents the atmospheric aerosols characterization that exist in different regions of Amazon basin. The biogenic aerosol emission by forest, as well as the atmospheric emissions of particulate materials due to biomass burning, were analyzed. Samples of aerosol particles were collected during three years in two different locations of Amazon region using Stacked Unit Filters. In order to study these samples some analytical nuclear techniques were used. The high concentrations of aerosols as a result of biomass burning process were observed in the period of june-september

  9. Applying Intelligent Computing Techniques to Modeling Biological Networks from Expression Data

    Institute of Scientific and Technical Information of China (English)

    Wei-Po Lee; Kung-Cheng Yang

    2008-01-01

    Constructing biological networks is one of the most important issues in system sbiology. However, constructing a network from data manually takes a considerable large amount of time, therefore an automated procedure is advocated. To automate the procedure of network construction, in this work we use two intelligent computing techniques, genetic programming and neural computation, to infer two kinds of network models that use continuous variables. To verify the presented approaches, experiments have been conducted and the preliminary results show that both approaches can be used to infer networks successfully.

  10. Applying stakeholder Delphi techniques for planning sustainable use of aquatic resources

    DEFF Research Database (Denmark)

    Lund, Søren; Banta, Gary Thomas; Bunting, Stuart W

    2015-01-01

    and Vietnam. The purpose of this paper is to give an account of how the stakeholder Delphi method was adapted and applied to support the participatory integrated action planning for sustainable use of aquatic resources facilitated within the HighARCS project. An account of the steps taken and results recorded......The HighARCS (Highland Aquatic Resources Conservation and Sustainable Development) project was a participatory research effort to map and better understand the patterns of resource use and livelihoods of communities who utilize highland aquatic resources in five sites across China, India...

  11. Fragrance composition of Dendrophylax lindenii (Orchidaceae using a novel technique applied in situ

    Directory of Open Access Journals (Sweden)

    James J. Sadler

    2012-02-01

    Full Text Available The ghost orchid, Dendrophylax lindenii (Lindley Bentham ex Rolfe (Orchidaceae, is one of North America’s rarest and well-known orchids. Native to Cuba and SW Florida where it frequents shaded swamps as an epiphyte, the species has experienced steady decline. Little information exists on D. lindenii’s biology in situ, raising conservation concerns. During the summer of 2009 at an undisclosed population in Collier County, FL, a substantial number (ca. 13 of plants initiated anthesis offering a unique opportunity to study this species in situ. We report a new technique aimed at capturing floral headspace of D. lindenii in situ, and identified volatile compounds using gas chromatography mass spectrometry (GC/MS. All components of the floral scent were identified as terpenoids with the exception of methyl salicylate. The most abundant compound was the sesquiterpene (E,E-α-farnesene (71% followed by (E-β-ocimene (9% and methyl salicylate (8%. Other compounds were: linalool (5%, sabinene (4%, (E-α-bergamotene (2%, α-pinene (1%, and 3-carene (1%. Interestingly, (E,E-α-farnesene has previously been associated with pestiferous insects (e.g., Hemiptera. The other compounds are common floral scent constituents in other angiosperms suggesting that our in situ technique was effective. Volatile capture was, therefore, possible without imposing physical harm (e.g., inflorescence detachment to this rare orchid.

  12. A New Astrometric Technique Applied to the Likely Tidal Disruption Event, Swift J166+57

    Science.gov (United States)

    Alianora Hounsell, Rebekah; Fruchter, Andrew S.; Levan, Andrew J.

    2015-01-01

    We have developed a new technique to align Hubble Space Telescope (HST) data using background galaxies as astrometric markers. This technique involves the cross correlation of cutouts of regions about individual galaxies from different epochs, enabling the determination of an astrometric solution. The method avoids errors introduced by proper motion when the locations of stars are used to transform the images. We have used this approach to investigate the nature of the unusual gamma-ray source Sw J1644+57, which was initially classified as a long gamma ray burst (LGRB). However, due to the object's atypical behavior in the X-ray and optical, along with its location within the host (150 ± 150 pc, see Levan et al. 2011) it has been suggested that the transient may be caused by a tidal disruption event (TDE). Additional theories have also been suggested for its origin which remain based on the collapsar model for a long burst, such as the collapse of a red giant, rather than a stripped star as is typical in LGRBs, or the creation of a magnetar.Precise astrometry of the transient with respect to the galaxy can potentially distinguish between these scenarios. Here we show that our method of alignment dramatically reduces the astrometric error of the position of the transient with respect to the nucleus of the host. We therefore discuss the implication of our result on the astrophysical nature of the object.

  13. Therapeutic techniques applied in the heavy-ion therapy at IMP

    Science.gov (United States)

    Li, Qiang; Sihver, Lembit

    2011-04-01

    Superficially-placed tumors have been treated with carbon ions at the Institute of Modern Physics (IMP), Chinese Academy of Sciences (CAS), since November 2006. Up to now, 103 patients have been irradiated in the therapy terminal of the heavy ion research facility in Lanzhou (HIRFL) at IMP, where carbon-ion beams with energies up to 100 MeV/u can be supplied and a passive beam delivery system has been developed and commissioned. A number of therapeutic and clinical experiences concerning heavy-ion therapy have been acquired at IMP. To extend the heavy-ion therapy project to deep-seated tumor treatment, a horizontal beam line dedicated to this has been constructed in the cooling storage ring (CSR), which is a synchrotron connected to the HIRFL as an injector, and is now in operation. Therapeutic high-energy carbon-ion beams, extracted from the HIRFL-CSR through slow extraction techniques, have been supplied in the deep-seated tumor therapy terminal. After the beam delivery, shaping and monitoring devices installed in the therapy terminal at HIRFL-CSR were validated through therapeutic beam tests, deep-seated tumor treatment with high-energy carbon ions started in March 2009. The therapeutic techniques in terms of beam delivery system, conformal irradiation method and treatment planning used at IMP are introduced in this paper.

  14. Hyphenated GC-FTIR and GC-MS techniques applied in the analysis of bioactive compounds

    Science.gov (United States)

    Gosav, Steluta; Paduraru, Nicoleta; Praisler, Mirela

    2014-08-01

    The drugs of abuse, which affect human nature and cause numerous crimes, have become a serious problem throughout the world. There are hundreds of amphetamine analogues on the black market. They consist of various alterations of the basic amphetamine molecular structure, which are yet not yet included in the lists of forbidden compounds although they retain or slightly modify the hallucinogenic effects of their parent compound. It is their important variety that makes their identification quite a challenge. A number of analytical procedures for the identification of amphetamines and their analogues have recently been reported. We are presenting the profile of the main hallucinogenic amphetamines obtained with the hyphenated techniques that are recommended for the identification of illicit amphetamines, i. e. gas chromatography combined with mass spectrometry (GC-MS) and gas chromatography coupled with Fourier transform infrared spectrometry (GC-FTIR). The infrared spectra of the analyzed hallucinogenic amphetamines present some absorption bands (1490 cm-1, 1440 cm-1, 1245 cm-1, 1050 cm-1 and 940 cm-1) that are very stable as position and shape, while their intensity depends of the side-chain substitution. The specific ionic fragment of the studied hallucinogenic compounds is the 3,4-methylenedioxybenzyl cation (m/e = 135) which has a small relative abundance (lesser than 20%). The complementarity of the above mentioned techniques for the identification of hallucinogenic compounds is discussed.

  15. Applying Reflective Middleware Techniques to Optimize a QoS-enabled CORBA Component Model Implementation

    Science.gov (United States)

    Wang, Nanbor; Parameswaran, Kirthika; Kircher, Michael; Schmidt, Douglas

    2003-01-01

    Although existing CORBA specifications, such as Real-time CORBA and CORBA Messaging, address many end-to-end quality-of service (QoS) properties, they do not define strategies for configuring these properties into applications flexibly, transparently, and adaptively. Therefore, application developers must make these configuration decisions manually and explicitly, which is tedious, error-prone, and open sub-optimal. Although the recently adopted CORBA Component Model (CCM) does define a standard configuration framework for packaging and deploying software components, conventional CCM implementations focus on functionality rather than adaptive quality-of-service, which makes them unsuitable for next-generation applications with demanding QoS requirements. This paper presents three contributions to the study of middleware for QoS-enabled component-based applications. It outlines rejective middleware techniques designed to adaptively (1) select optimal communication mechanisms, (2) manage QoS properties of CORBA components in their contain- ers, and (3) (re)con$gure selected component executors dynamically. Based on our ongoing research on CORBA and the CCM, we believe the application of rejective techniques to component middleware will provide a dynamically adaptive and (re)configurable framework for COTS software that is well-suited for the QoS demands of next-generation applications.

  16. Predicting Performance of Schools by Applying Data Mining Techniques on Public Examination Results

    Directory of Open Access Journals (Sweden)

    J. Macklin Abraham Navamani

    2015-02-01

    Full Text Available This study work presents a systematic analysis of various features of the higher grade school public examination results data in the state of Tamil Nadu, India through different data mining classification algorithms to predict the performance of Schools. Nowadays the parents always targets to select the right city, school and factors which contributes to the success of the results in schools of their children. There could be possible effects of factors such as Ethnic mix, Medium of study, geography could make a difference in results. The proposed work would focus on two fold factors namely Machine Learning algorithms to predict School performance with satisfying accuracy and to evaluate the data mining technique which would give better accuracy of the learning algorithms. It was found that there exist some apparent and some less noticeable attributes that demonstrate a strong correlation with student performance. Data were collected through the credible source data preparation and correlation analysis. The findings revealed that the public examinations results data was a very helpful predictor of performance of school in order to improve the result with maximum level and also improved the overall accuracy with the help of Adaboost technique.

  17. Applying Tiab’s direct synthesis technique to dilatant non-Newtonian/Newtonian fluids

    Directory of Open Access Journals (Sweden)

    Javier Andrés Martínez

    2011-08-01

    Full Text Available Non-Newtonian fluids, such as polymer solutions, have been used by the oil industry for many years as fracturing agents and drilling mud. These solutions, which normally include thickened water and jelled fluids, are injected into the formation to enhanced oil recovery by improving sweep efficiency. It is worth noting that some heavy oils behave non-Newtonianly. Non-Newtonian fluids do not have direct proportionality between applied shear stress and shear rate and viscosity varies with shear rate depending on whether the fluid is either pseudoplastic or dilatant. Viscosity decreases as shear rate increases for the former whilst the reverse takes place for dilatants. Mathematical models of conventional fluids thus fail when applied to non-Newtonian fluids. The pressure derivative curve is introduced in this descriptive work for a dilatant fluid and its pattern was observed. Tiab’s direct synthesis (TDS methodology was used as a tool for interpreting pressure transient data to estimate effective permeability, skin factors and non-Newtonian bank radius. The methodology was successfully verified by its application to synthetic examples. Also, comparing it to pseudoplastic behavior, it was found that the radial flow regime in the Newtonian zone of dilatant fluids took longer to form regarding both the flow behavior index and consistency factor.

  18. 化学分析在核法证中的应用简述%The Brief Review of Chemistry Analysis Applying to Nuclear Forensic

    Institute of Scientific and Technical Information of China (English)

    吴伦强; 韦孟伏; 张连平; 邹乐西

    2014-01-01

    The nuclear forensic has been introduced simply,the request and importance function of chemistry a-nalysis in nuclear forensic has been introduced,radiochemical separation technology applying to nuclear forensic has been reviewed briefly.The research aspects have been brought forward,basing on the research foundation.%介绍了在反核走私、防核扩散和核恐怖中产生的新学科---核法证,及其核法证中化学分析的重要作用和要求。综述了化学分析技术在核法证中的应用研究现状,提出了相关核法证中化学分析研究新思路。

  19. Increasing the Detection Limit of the Parkinson Disorder through a Specific Surface Chemistry Applied onto Inner Surface of the Titration Well

    Directory of Open Access Journals (Sweden)

    Fabienne Poncin-Epaillard

    2012-04-01

    Full Text Available The main objective of this paper was to illustrate the enhancement of the sensitivity of ELISA titration for neurodegenerative proteins by reducing nonspecific adsorptions that could lead to false positives. This goal was obtained thanks to the association of plasma and wet chemistries applied to the inner surface of the titration well. The polypropylene surface was plasma-activated and then, dip-coated with different amphiphilic molecules. These molecules have more or less long hydrocarbon chains and may be charged. The modified surfaces were characterized in terms of hydrophilic—phobic character, surface chemical groups and topography. Finally, the coated wells were tested during the ELISA titration of the specific antibody capture of the α-synuclein protein. The highest sensitivity is obtained with polar (Θ = 35°, negatively charged and smooth inner surface.

  20. Mass Movement Hazards in the Mediterranean; A review on applied techniques and methodologies

    Science.gov (United States)

    Ziade, R.; Abdallah, C.; Baghdadi, N.

    2012-04-01

    Emergent population and expansions of settlements and life-lines over hazardous areas in the Mediterranean region have largely increased the impact of Mass Movements (MM) both in industrialized and developing countries. This trend is expected to continue in the next decades due to increased urbanization and development, continued deforestation and increased regional precipitation in MM-prone areas due to changing climatic patterns. Consequently, and over the past few years, monitoring of MM has acquired great importance from the scientific community as well as the civilian one. This article begins with a discussion of the MM classification, and the different topographic, geologic, hydrologic and environmental impacting factors. The intrinsic (preconditioning) variables determine the susceptibility of MM and extrinsic factors (triggering) can induce the probability of MM occurrence. The evolution of slope instability studies is charted from geodetic or observational techniques, to geotechnical field-based origins to recent higher levels of data acquisition through Remote Sensing (RS) and Geographic Information System (GIS) techniques. Since MM detection and zoning is difficult in remote areas, RS and GIS have enabled regional studies to predominate over site-based ones where they provide multi-temporal images hence facilitate greatly MM monitoring. The unusual extent of the spectrum of MM makes it difficult to define a single methodology to establish MM hazard. Since the probability of occurrence of MM is one of the key components in making rational decisions for management of MM risk, scientists and engineers have developed physical parameters, equations and environmental process models that can be used as assessment tools for management, education, planning and legislative purposes. Assessment of MM is attained through various modeling approaches mainly divided into three main sections: quantitative/Heuristic (1:2.000-1:10.000), semi-quantitative/Statistical (1

  1. A comparison of new, old and future densiometic techniques as applied to volcanologic study.

    Science.gov (United States)

    Pankhurst, Matthew; Moreland, William; Dobson, Kate; Þórðarson, Þorvaldur; Fitton, Godfrey; Lee, Peter

    2015-04-01

    The density of any material imposes a primary control upon its potential or actual physical behaviour in relation to its surrounds. It follows that a thorough understanding of the physical behaviour of dynamic, multi-component systems, such as active volcanoes, requires knowledge of the density of each component. If we are to accurately predict the physical behaviour of synthesized or natural volcanic systems, quantitative densiometric measurements are vital. The theoretical density of melt, crystals and bubble phases may be calculated using composition, structure, temperature and pressure inputs. However, measuring the density of natural, non-ideal, poly-phase materials remains problematic, especially if phase specific measurement is important. Here we compare three methods; Archimedes principle, He-displacement pycnometry and X-ray micro computed tomography (XMT) and discuss the utility and drawbacks of each in the context of modern volcanologic study. We have measured tephra, ash and lava from the 934 AD Eldgjá eruption (Iceland), and the 2010 AD Eyjafjallajökull eruption (Iceland), using each technique. These samples exhibit a range of particle sizes, phases and textures. We find that while the Archimedes method remains a useful, low-cost technique to generate whole-rock density data, relative precision is problematic at small particles sizes. Pycnometry offers a more precise whole-rock density value, at a comparable cost-per-sample. However, this technique is based upon the assumption pore spaces within the sample are equally available for gas exchange, which may or may not be the case. XMT produces 3D images, at resolutions from nm to tens of µm per voxel where X-ray attenuation is a qualitative measure of relative electron density, expressed as greyscale number/brightness (usually 16-bit). Phases and individual particles can be digitally segmented according to their greyscale and other characteristics. This represents a distinct advantage over both

  2. An Encoding Technique for Multiobjective Evolutionary Algorithms Applied to Power Distribution System Reconfiguration

    Directory of Open Access Journals (Sweden)

    J. L. Guardado

    2014-01-01

    Full Text Available Network reconfiguration is an alternative to reduce power losses and optimize the operation of power distribution systems. In this paper, an encoding scheme for evolutionary algorithms is proposed in order to search efficiently for the Pareto-optimal solutions during the reconfiguration of power distribution systems considering multiobjective optimization. The encoding scheme is based on the edge window decoder (EWD technique, which was embedded in the Strength Pareto Evolutionary Algorithm 2 (SPEA2 and the Nondominated Sorting Genetic Algorithm II (NSGA-II. The effectiveness of the encoding scheme was proved by solving a test problem for which the true Pareto-optimal solutions are known in advance. In order to prove the practicability of the encoding scheme, a real distribution system was used to find the near Pareto-optimal solutions for different objective functions to optimize.

  3. Automatic diameter control system applied to the laser heated pedestal growth technique

    Directory of Open Access Journals (Sweden)

    Andreeta M.R.B.

    2003-01-01

    Full Text Available We described an automatic diameter control system (ADC, for the laser heated pedestal growth technique, that reduces the diameter fluctuations in oxide fibers grown from unreacted and non-sinterized pedestals, to less than 2% of the average fiber diameter, and diminishes the average diameter fluctuation, over the entire length of the fiber, to less than 1%. The ADC apparatus is based on an artificial vision system that controls the pulling speed and the height of the molten zone within a precision of 30 mum. We also show that this system can be used for periodic in situ axial doping the fiber. Pure and Cr3+ doped LaAlO3 and pure LiNbO3 were usedas model materials.

  4. Models of signal validation using artificial intelligence techniques applied to a nuclear reactor

    International Nuclear Information System (INIS)

    This work presents two models of signal validation in which the analytical redundancy of the monitored signals from a nuclear plant is made by neural networks. In one model the analytical redundancy is made by only one neural network while in the other it is done by several neural networks, each one working in a specific part of the entire operation region of the plant. Four cluster techniques were tested to separate the entire operation region in several specific regions. An additional information of systems' reliability is supplied by a fuzzy inference system. The models were implemented in C language and tested with signals acquired from Angra I nuclear power plant, from its start to 100% of power. (author)

  5. GPU peer-to-peer techniques applied to a cluster interconnect

    CERN Document Server

    Ammendola, Roberto; Biagioni, Andrea; Bisson, Mauro; Fatica, Massimiliano; Frezza, Ottorino; Cicero, Francesca Lo; Lonardo, Alessandro; Mastrostefano, Enrico; Paolucci, Pier Stanislao; Rossetti, Davide; Simula, Francesco; Tosoratto, Laura; Vicini, Piero

    2013-01-01

    Modern GPUs support special protocols to exchange data directly across the PCI Express bus. While these protocols could be used to reduce GPU data transmission times, basically by avoiding staging to host memory, they require specific hardware features which are not available on current generation network adapters. In this paper we describe the architectural modifications required to implement peer-to-peer access to NVIDIA Fermi- and Kepler-class GPUs on an FPGA-based cluster interconnect. Besides, the current software implementation, which integrates this feature by minimally extending the RDMA programming model, is discussed, as well as some issues raised while employing it in a higher level API like MPI. Finally, the current limits of the technique are studied by analyzing the performance improvements on low-level benchmarks and on two GPU-accelerated applications, showing when and how they seem to benefit from the GPU peer-to-peer method.

  6. Acoustic emission partial discharge detection technique applied to fault diagnosis: Case studies of generator transformers

    Directory of Open Access Journals (Sweden)

    Shanker Tangella Bhavani

    2016-01-01

    Full Text Available In power transformers, locating the partial discharge (PD source is as important as identifying it. Acoustic Emission (AE sensing offers a good solution for both PD detection and PD source location identification. In this paper the principle of the AE technique, along with in-situ findings of the online acoustic emission signals captured from partial discharges on a number of Generator Transformers (GT, is discussed. Of the two cases discussed, the first deals with Acoustic Emission Partial Discharge (AEPD tests on two identical transformers, and the second deals with the AEPD measurement of a transformer carried out on different occasions (years. These transformers are from a hydropower station and a thermal power station in India. Tests conducted in identical transformers give the provision for comparing AE signal amplitudes from the two transformers. These case studies also help in comprehending the efficacy of integrating Dissolved Gas is (DGA data with AEPD test results in detecting and locating the PD source.

  7. Vibroacoustic Modeling of Mechanically Coupled Structures: Artificial Spring Technique Applied to Light and Heavy Mediums

    Directory of Open Access Journals (Sweden)

    L. Cheng

    1996-01-01

    Full Text Available This article deals with the modeling of vibrating structures immersed in both light and heavy fluids, and possible applications to noise control problems and industrial vessels containing fluids. A theoretical approach, using artificial spring systems to characterize the mechanical coupling between substructures, is extended to include fluid loading. A structure consisting of a plate-ended cylindrical shell and its enclosed acoustic cavity is analyzed. After a brief description of the proposed technique, a number of numerical results are presented. The analysis addresses the following specific issues: the coupling between the plate and the shell; the coupling between the structure and the enclosure; the possibilities and difficulties regarding internal soundproofing through modifications of the joint connections; and the effects of fluid loading on the vibration of the structure.

  8. Emerging and Innovative Techniques for Arsenic Removal Applied to a Small Water Supply System

    Directory of Open Access Journals (Sweden)

    António J. Alçada

    2009-12-01

    Full Text Available The impact of arsenic on human health has led its drinking water MCL to be drastically reduced from 50 to 10 ppb. Consequently, arsenic levels in many water supply sources have become critical. This has resulted in technical and operational impacts on many drinking water treatment plants that have required onerous upgrading to meet the new standard. This becomes a very sensitive issue in the context of water scarcity and climate change, given the expected increasing demand on groundwater sources. This work presents a case study that describes the development of low-cost techniques for efficient arsenic control in drinking water. The results obtained at the Manteigas WTP (Portugal demonstrate the successful implementation of an effective and flexible process of reactive filtration using iron oxide. At real-scale, very high removal efficiencies of over 95% were obtained.

  9. Applying the sterile insect technique to the control of insect pests

    International Nuclear Information System (INIS)

    The sterile insect technique (SIT) is basically a novel twentieth century approach to insect birth control. It is species specific and exploits the mate seeking behaviour of the insect. The basic principle is simple. Insects are mass reared in 'factories' and sexually sterilized by gamma rays from a 60Co source. The sterile insects are then released in a controlled fashion into nature. Matings between the sterile insects released and native insects produced no progeny. If enough of these matings take place, reproduction of the pest population decreases. With continued release, the pest population can be controlled and in some cases eradicated. In the light of the many important applications of the SIT worldwide and the great potential that SIT concepts hold for insect and pest control in developing countries, two special benefits should be stressed. Of greatest significance is the fact that the SIT permits suppression and eradication of insect pests in an environmentally harmless manner. It combines nuclear techniques with genetic approaches and, in effect, replaces intensive use of chemicals in pest control. Although chemicals are used sparingly at the outset in some SIT programmes to reduce the size of the pest population before releases of sterilized insects are started, the total amount of chemicals used in an SIT programme is a mere fraction of what would be used without the SIT. It is also of great importance that the SIT is not designed strictly for the eradication of pest species but can readily be used in the suppression of insect populations. In fact, the SIT is ideally suited for use in conjunction with other agricultural pest control practices such as the use of parasites and predators, attractants and cultural controls (e.g. ploughing under or destruction of crop residues) in integrated pest management programmes to achieve control at the lowest possible price and with a minimum of chemical contamination of the environment

  10. Inverting travel times with a triplication. [spline fitting technique applied to lunar seismic data reduction

    Science.gov (United States)

    Jarosch, H. S.

    1982-01-01

    A method based on the use of constrained spline fits is used to overcome the difficulties arising when body-wave data in the form of T-delta are reduced to the tau-p form in the presence of cusps. In comparison with unconstrained spline fits, the method proposed here tends to produce much smoother models which lie approximately in the middle of the bounds produced by the extremal method. The method is noniterative and, therefore, computationally efficient. The method is applied to the lunar seismic data, where at least one triplication is presumed to occur in the P-wave travel-time curve. It is shown, however, that because of an insufficient number of data points for events close to the antipode of the center of the lunar network, the present analysis is not accurate enough to resolve the problem of a possible lunar core.

  11. Contrast cancellation technique applied to digital x-ray imaging using silicon strip detectors

    International Nuclear Information System (INIS)

    Dual-energy mammographic imaging experimental tests have been performed using a compact dichromatic imaging system based on a conventional x-ray tube, a mosaic crystal, and a 384-strip silicon detector equipped with full-custom electronics with single photon counting capability. For simulating mammal tissue, a three-component phantom, made of Plexiglass, polyethylene, and water, has been used. Images have been collected with three different pairs of x-ray energies: 16-32 keV, 18-36 keV, and 20-40 keV. A Monte Carlo simulation of the experiment has also been carried out using the MCNP-4C transport code. The Alvarez-Macovski algorithm has been applied both to experimental and simulated data to remove the contrast between two of the phantom materials so as to enhance the visibility of the third one

  12. Research on Key Techniques for Video Surveillance System Applied to Shipping Channel Management

    Institute of Scientific and Technical Information of China (English)

    WANG Lin; ZHUANG Yan-bin; ZHENG Cheng-zeng

    2007-01-01

    A video patrol and inspection system is an important part of the government's shipping channel information management. This system is mainly applied to video information gathering and processing as a patrol is carried out. The system described in this paper can preview, edit, and add essential explanation messages to the collected video data. It then transfers these data and messages to a video server for the leaders and engineering and technical personnel to retrieve, play, chart, download or print. Each department of the government will use the system's functions according to that department's mission. The system can provide an effective means for managing the shipping enterprise. It also provides a valuable reference for the modernizing of waterborne shipping.

  13. Linear and Non-Linear Control Techniques Applied to Actively Lubricated Journal Bearings

    DEFF Research Database (Denmark)

    Nicoletti, Rodrigo; Santos, Ilmar

    2003-01-01

    to a tilting-pad journal bearing, are analysed and discussed. Important conclusions about the application of integral controllers, responsible for changing the rotor-bearing equilibrium position and consequently the "passive" oil film damping coefficients, are achieved. Numerical results show an effective......The main objectives of actively lubricated bearings are the simultaneous reduction of wear and vibration between rotating and stationary machinery parts. For reducing wear and dissipating vibration energy until certain limits, one can count with the conventional hydrodynamic lubrication....... For further reduction of shaft vibrations one can count with the active lubrication action, which is based on injecting pressurised oil into the bearing gap through orifices machined in the bearing sliding surface. The design and efficiency of some linear (PD, PI and PID) and non-linear controllers, applied...

  14. Synthesis of liquid crystals derived from nitroazobenzene: a proposed multistep synthesis applied to organic chemistry laboratory classes; Sintese de cristais liquidos derivados do nitroazobenzeno: uma proposta de sintese multi-etapas aplicada as aulas de quimica organica experimental

    Energy Technology Data Exchange (ETDEWEB)

    Cristiano, Rodrigo; Cabral, Marilia Gabriela B.; Aquino, Rafael B. de; Cristiano, Claudia M.Z., E-mail: rcristiano@quimica.ufpb.br [Universidade Federal da Paraiba (UFPB), Joao Pessoa, PB (Brazil). Departamento de Quimica

    2014-07-01

    We describe a synthetic route consisting of five steps from aniline to obtain liquid crystal compounds derived from nitroazobenzene. Syntheses were performed during the second half of the semester in organic chemistry laboratory classes. Students characterized the liquid crystal phase by the standard melting point techniques, differential scanning calorimetry and polarized optical microscopy. These experiments allow undergraduate students to explore fundamentally important reactions in Organic Chemistry, as well as modern concepts in Chemistry such as self-assembly and self-organization, nanostructured materials and molecular electronics. (author)

  15. Prediction of Quality Features in Iberian Ham by Applying Data Mining on Data From MRI and Computer Vision Techniques

    Directory of Open Access Journals (Sweden)

    Daniel Caballero

    2014-03-01

    Full Text Available This paper aims to predict quality features of Iberian hams by using non-destructive methods of analys is and data mining. Iberian hams were analyzed by Magn etic Resonance Imaging (MRI and Computer Vision Techniques (CVT throughout their ripening process and physico-chemical parameters from them were also measured. The obtained data were used to create an initial database. Deductive techniques ofdata mining (multiple linear regression were used to estimate new data, allowing the insertion of newrecords in the database. Predictive techniques of data mining were applied (multiple linear regression on MRI-CVT data, achieving prediction equations of weight, moisture and lipid content. Finally, data fromprediction equations were compared to data determined by physical-chemical analysis, obtaining high correlation coefficients in most cases. Therefore, data mining, MRI and CVT are suitable tools to esti mate quality traits of Iberian hams. This would improve the control of the ham processing in a non-destruct ive way.

  16. Time-reversal imaging techniques applied to tremor waveforms near Cholame, California to locate tectonic tremor

    Science.gov (United States)

    Horstmann, T.; Harrington, R. M.; Cochran, E. S.

    2012-12-01

    Frequently, the lack of distinctive phase arrivals makes locating tectonic tremor more challenging than locating earthquakes. Classic location algorithms based on travel times cannot be directly applied because impulsive phase arrivals are often difficult to recognize. Traditional location algorithms are often modified to use phase arrivals identified from stacks of recurring low-frequency events (LFEs) observed within tremor episodes, rather than single events. Stacking the LFE waveforms improves the signal-to-noise ratio for the otherwise non-distinct phase arrivals. In this study, we apply a different method to locate tectonic tremor: a modified time-reversal imaging approach that potentially exploits the information from the entire tremor waveform instead of phase arrivals from individual LFEs. Time reversal imaging uses the waveforms of a given seismic source recorded by multiple seismometers at discrete points on the surface and a 3D velocity model to rebroadcast the waveforms back into the medium to identify the seismic source location. In practice, the method works by reversing the seismograms recorded at each of the stations in time, and back-propagating them from the receiver location individually into the sub-surface as a new source time function. We use a staggered-grid, finite-difference code with 2.5 ms time steps and a grid node spacing of 50 m to compute the rebroadcast wavefield. We calculate the time-dependent curl field at each grid point of the model volume for each back-propagated seismogram. To locate the tremor, we assume that the source time function back-propagated from each individual station produces a similar curl field at the source position. We then cross-correlate the time dependent curl field functions and calculate a median cross-correlation coefficient at each grid point. The highest median cross-correlation coefficient in the model volume is expected to represent the source location. For our analysis, we use the velocity model of

  17. Use of pesticides and experience of applying radioisotope techniques in a developing country

    International Nuclear Information System (INIS)

    An evaluation is made of the use of pesticides by Panamanian farmers in a tropical environment, also covering pesticide residues in plant and animal products, man and soil. In addition, experience with radioisotope techniques is described. Chemical control is common practice among farmers. Each year, 5000 to 6000 t of pesticides are used, especially in horticulture and banana cultivation. Herbicides and insecticides predominate in terms of quantity, and fungicides in terms of frequency of application. Use of the so-called persistent organo-chlorines over the last few decades has led to the presence of residues in plant and animal products in amounts less than 2.2 and 0.1 mg/kg for DDT and lindane, respectively. An average of 11 mg of DDT per kilogram of fat has been detected in the population; about 50% of the persons handling agrochemicals showed direct exposure. Taking into account local practices and tropical conditions, an evaluation is being made of widely used pesticides (maneb, paraquat and 2,4-D) labelled with 14C. The studies have yielded additional information on the behaviour and the residues of these important additives in the environment and in fruits. (author). 3 refs, 1 fig., 5 tabs

  18. Super-ensemble techniques applied to wave forecast: performance and limitations

    Directory of Open Access Journals (Sweden)

    F. Lenartz

    2010-06-01

    Full Text Available Nowadays, several operational ocean wave forecasts are available for a same region. These predictions may considerably differ, and to choose the best one is generally a difficult task. The super-ensemble approach, which consists in merging different forecasts and past observations into a single multi-model prediction system, is evaluated in this study. During the DART06 campaigns organized by the NATO Undersea Research Centre, four wave forecasting systems were simultaneously run in the Adriatic Sea, and significant wave height was measured at six stations as well as along the tracks of two remote sensors. This effort provided the necessary data set to compare the skills of various multi-model combination techniques. Our results indicate that a super-ensemble based on the Kalman Filter improves the forecast skills: The bias during both the hindcast and forecast periods is reduced, and the correlation coefficient is similar to that of the best individual model. The spatial extrapolation of local results is not straightforward and requires further investigation to be properly implemented.

  19. Erasing the Milky Way: new cleaning technique applied to GBT intensity mapping data

    CERN Document Server

    Wolz, L; Abdalla, F B; Anderson, C M; Chang, T -C; Li, Y -C; Masui, K W; Switzer, E; Pen, U -L; Voytek, T C; Yadav, J

    2015-01-01

    We present the first application of a new foreground removal pipeline to the current leading HI intensity mapping dataset, obtained by the Green Bank Telescope (GBT). We study the 15hr and 1hr field data of the GBT observations previously presented in Masui et al. (2013) and Switzer et al. (2013) covering about 41 square degrees at 0.6 < z < 1.0 which overlaps with the WiggleZ galaxy survey employed for the cross-correlation with the maps. In the presented pipeline, we subtract the Galactic foreground continuum and the point source contaminations using an independent component analysis technique (fastica) and develop a description for a Fourier-based optimal weighting estimator to compute the temperature power spectrum of the intensity maps and cross-correlation with the galaxy survey data. We show that fastica is a reliable tool to subtract diffuse and point-source emission by using the non-Gaussian nature of their probability functions. The power spectra of the intensity maps and the cross-correlation...

  20. Applying satellite remote sensing technique in disastrous rainfall systems around Taiwan

    Science.gov (United States)

    Liu, Gin-Rong; Chen, Kwan-Ru; Kuo, Tsung-Hua; Liu, Chian-Yi; Lin, Tang-Huang; Chen, Liang-De

    2016-05-01

    Many people in Asia regions have been suffering from disastrous rainfalls year by year. The rainfall from typhoons or tropical cyclones (TCs) is one of their key water supply sources, but from another perspective such TCs may also bring forth unexpected heavy rainfall, thereby causing flash floods, mudslides or other disasters. So far we cannot stop or change a TC route or intensity via present techniques. Instead, however we could significantly mitigate the possible heavy casualties and economic losses if we can earlier know a TC's formation and can estimate its rainfall amount and distribution more accurate before its landfalling. In light of these problems, this short article presents methods to detect a TC's formation as earlier and to delineate its rainfall potential pattern more accurate in advance. For this first part, the satellite-retrieved air-sea parameters are obtained and used to estimate the thermal and dynamic energy fields and variation over open oceans to delineate the high-possibility typhoon occurring ocean areas and cloud clusters. For the second part, an improved tropical rainfall potential (TRaP) model is proposed with better assumptions then the original TRaP for TC rainfall band rotations, rainfall amount estimation, and topographic effect correction, to obtain more accurate TC rainfall distributions, especially for hilly and mountainous areas, such as Taiwan.

  1. Comparison of motion correction techniques applied to functional near-infrared spectroscopy data from children

    Science.gov (United States)

    Hu, Xiao-Su; Arredondo, Maria M.; Gomba, Megan; Confer, Nicole; DaSilva, Alexandre F.; Johnson, Timothy D.; Shalinsky, Mark; Kovelman, Ioulia

    2015-12-01

    Motion artifacts are the most significant sources of noise in the context of pediatric brain imaging designs and data analyses, especially in applications of functional near-infrared spectroscopy (fNIRS), in which it can completely affect the quality of the data acquired. Different methods have been developed to correct motion artifacts in fNIRS data, but the relative effectiveness of these methods for data from child and infant subjects (which is often found to be significantly noisier than adult data) remains largely unexplored. The issue is further complicated by the heterogeneity of fNIRS data artifacts. We compared the efficacy of the six most prevalent motion artifact correction techniques with fNIRS data acquired from children participating in a language acquisition task, including wavelet, spline interpolation, principal component analysis, moving average (MA), correlation-based signal improvement, and combination of wavelet and MA. The evaluation of five predefined metrics suggests that the MA and wavelet methods yield the best outcomes. These findings elucidate the varied nature of fNIRS data artifacts and the efficacy of artifact correction methods with pediatric populations, as well as help inform both the theory and practice of optical brain imaging analysis.

  2. Applying data fusion techniques for benthic habitat mapping and monitoring in a coral reef ecosystem

    Science.gov (United States)

    Zhang, Caiyun

    2015-06-01

    Accurate mapping and effective monitoring of benthic habitat in the Florida Keys are critical in developing management strategies for this valuable coral reef ecosystem. For this study, a framework was designed for automated benthic habitat mapping by combining multiple data sources (hyperspectral, aerial photography, and bathymetry data) and four contemporary imagery processing techniques (data fusion, Object-based Image Analysis (OBIA), machine learning, and ensemble analysis). In the framework, 1-m digital aerial photograph was first merged with 17-m hyperspectral imagery and 10-m bathymetry data using a pixel/feature-level fusion strategy. The fused dataset was then preclassified by three machine learning algorithms (Random Forest, Support Vector Machines, and k-Nearest Neighbor). Final object-based habitat maps were produced through ensemble analysis of outcomes from three classifiers. The framework was tested for classifying a group-level (3-class) and code-level (9-class) habitats in a portion of the Florida Keys. Informative and accurate habitat maps were achieved with an overall accuracy of 88.5% and 83.5% for the group-level and code-level classifications, respectively.

  3. Applying stereotactic injection technique to study genetic effects on animal behaviors.

    Science.gov (United States)

    McSweeney, Colleen; Mao, Yingwei

    2015-05-10

    Stereotactic injection is a useful technique to deliver high titer lentiviruses to targeted brain areas in mice. Lentiviruses can either overexpress or knockdown gene expression in a relatively focused region without significant damage to the brain tissue. After recovery, the injected mouse can be tested on various behavioral tasks such as the Open Field Test (OFT) and the Forced Swim Test (FST). The OFT is designed to assess locomotion and the anxious phenotype in mice by measuring the amount of time that a mouse spends in the center of a novel open field. A more anxious mouse will spend significantly less time in the center of the novel field compared to controls. The FST assesses the anti-depressive phenotype by quantifying the amount of time that mice spend immobile when placed into a bucket of water. A mouse with an anti-depressive phenotype will spend significantly less time immobile compared to control animals. The goal of this protocol is to use the stereotactic injection of a lentivirus in conjunction with behavioral tests to assess how genetic factors modulate animal behaviors.

  4. Dosimetric properties of bio minerals applied to high-dose dosimetry using the TSEE technique

    Energy Technology Data Exchange (ETDEWEB)

    Vila, G. B.; Caldas, L. V. E., E-mail: gbvila@ipen.br [Instituto de Pesquisas Energeticas e Nucleares / CNEN, Av. Lineu Prestes 2242, Cidade Universitaria, 05508-000 Sao Paulo (Brazil)

    2014-08-15

    The study of the dosimetric properties such as reproducibility, the residual signal, lower detection dose, dose-response curve and fading of the thermally stimulated emission exo electronic (TSEE) signal of Brazilian bio minerals has shown that these materials present a potential use as radiation dosimeters. The reproducibility within ± 10% for oyster shell, mother-of-pearl and coral reef samples showed that the signal dispersion is small when compared with the mean value of the measurements. The study showed that the residual signal can be eliminated with a thermal treatment at 300 grades C/1 h. The lower detection dose of 9.8 Gy determined for the oyster shell samples when exposed to beta radiation and 1.6 Gy for oyster shell and mother-of-pearl samples when exposed to gamma radiation can be considered good, taking into account the high doses of this study. The materials presented linearity at the dose response curves in some ranges, but the lack of linearity in other cases presents no problem since a good mathematical description is possible. The fading study showed that the loss of TSEE signal can be minimized if the samples are protected from interferences such as light, heat and humidity. Taking into account the useful linearity range as the main dosimetric characteristic, the tiger shell and oyster shell samples are the most suitable for high-dose dosimetry using the TSEE technique. (Author)

  5. COMPARATIVE PERFORMANCE MONITORING OF RAINFED WATERSHEDS APPLYING GIS AND RS TECHNIQUES

    Directory of Open Access Journals (Sweden)

    ARUN W. DHAWALE

    2012-03-01

    Full Text Available Under the watershed development project of the Ministry of Rural Development, many micro watersheds have been identified for development and management. However Government is handicapped inobtaining data on the performance of these programmes due to the absence of watershed performance studies. Rainfed agriculture is clearly critical to agricultural performance in India. Nonetheless, it is difficult to precisely quantify the overall importance of the sector. The widely quoted statistic is that 70% of cultivated area israinfed, implying that rainfed agriculture is more important than irrigated agriculture. In the present study two rainfed micro-watersheds namely Kolvan valley and Darewadi is taken as case study for performance monitoring using GIS and RS Techniques. An attempt has been made to highlight the role of GIS and RS in estimation of runoff from both the watersheds by SCS curve number method. The methodology developed for the research show that the knowledge extracted from proposed approach can remove the problem of performance monitoring of micro watersheds to great extent. Comparative performance of both micro watersheds having extreme rainfall conditions shows that in Darewadi micro watershed overall success rate is more than Kolvan valley.

  6. Hyperspectral imaging techniques applied to the monitoring of wine waste anaerobic digestion process

    Science.gov (United States)

    Serranti, Silvia; Fabbri, Andrea; Bonifazi, Giuseppe

    2012-11-01

    An anaerobic digestion process, finalized to biogas production, is characterized by different steps involving the variation of some chemical and physical parameters related to the presence of specific biomasses as: pH, chemical oxygen demand (COD), volatile solids, nitrate (NO3-) and phosphate (PO3-). A correct process characterization requires a periodical sampling of the organic mixture in the reactor and a further analysis of the samples by traditional chemical-physical methods. Such an approach is discontinuous, time-consuming and expensive. A new analytical approach based on hyperspectral imaging in the NIR field (1000 to 1700 nm) is investigated and critically evaluated, with reference to the monitoring of wine waste anaerobic digestion process. The application of the proposed technique was addressed to identify and demonstrate the correlation existing, in terms of quality and reliability of the results, between "classical" chemical-physical parameters and spectral features of the digestate samples. Good results were obtained, ranging from a R2=0.68 and a RMSECV=12.83 mg/l for nitrate to a R2=0.90 and a RMSECV=5495.16 mg O2/l for COD. The proposed approach seems very useful in setting up innovative control strategies allowing for full, continuous control of the anaerobic digestion process.

  7. Data smoothing techniques applied to proton microprobe scans of teleost hard parts

    International Nuclear Information System (INIS)

    We use a proton microprobe to examine the distribution of elements in otoliths and scales of teleost (bony) fish. The elements of principal interest are calcium and strontium in otoliths and calcium and fluorine in scales. Changes in the distribution of these elements across hard structures may allow inferences about the life histories of fish. Otoliths and scales of interest are up to a centimeter in linear dimension and to reveal the structures of interest up to 200 sampling points are required in each dimension. The time needed to accumulate high X-ray counts at each sampling point can be large, particularly for strontium. To reduce microprobe usage we use data smoothing techniques to reveal changing patterns with modest X-ray count accumulations at individual data points. In this paper we review performance for revealing pattern at modest levels of X-ray count accumulations of a selection of digital filters (moving average smoothers), running median filters, robust locally weighted regression filters and adaptive spline filters. (author)

  8. Experimental studies of active and passive flow control techniques applied in a twin air-intake.

    Science.gov (United States)

    Paul, Akshoy Ranjan; Joshi, Shrey; Jindal, Aman; Maurya, Shivam P; Jain, Anuj

    2013-01-01

    The flow control in twin air-intakes is necessary to improve the performance characteristics, since the flow traveling through curved and diffused paths becomes complex, especially after merging. The paper presents a comparison between two well-known techniques of flow control: active and passive. It presents an effective design of a vortex generator jet (VGJ) and a vane-type passive vortex generator (VG) and uses them in twin air-intake duct in different combinations to establish their effectiveness in improving the performance characteristics. The VGJ is designed to insert flow from side wall at pitch angle of 90 degrees and 45 degrees. Corotating (parallel) and counterrotating (V-shape) are the configuration of vane type VG. It is observed that VGJ has the potential to change the flow pattern drastically as compared to vane-type VG. While the VGJ is directed perpendicular to the side walls of the air-intake at a pitch angle of 90 degree, static pressure recovery is increased by 7.8% and total pressure loss is reduced by 40.7%, which is the best among all other cases tested for VGJ. For bigger-sized VG attached to the side walls of the air-intake, static pressure recovery is increased by 5.3%, but total pressure loss is reduced by only 4.5% as compared to all other cases of VG.

  9. Correlation Techniques as Applied to Pose Estimation in Space Station Docking

    Science.gov (United States)

    Rollins, J. Michael; Juday, Richard D.; Monroe, Stanley E., Jr.

    2002-01-01

    The telerobotic assembly of space-station components has become the method of choice for the International Space Station (ISS) because it offers a safe alternative to the more hazardous option of space walks. The disadvantage of telerobotic assembly is that it does not provide for direct arbitrary views of mating interfaces for the teleoperator. Unless cameras are present very close to the interface positions, such views must be generated graphically, based on calculated pose relationships derived from images. To assist in this photogrammetric pose estimation, circular targets, or spots, of high contrast have been affixed on each connecting module at carefully surveyed positions. The appearance of a subset of spots essentially must form a constellation of specific relative positions in the incoming digital image stream in order for the docking to proceed. Spot positions are expressed in terms of their apparent centroids in an image. The precision of centroid estimation is required to be as fine as 1I20th pixel, in some cases. This paper presents an approach to spot centroid estimation using cross correlation between spot images and synthetic spot models of precise centration. Techniques for obtaining sub-pixel accuracy and for shadow, obscuration and lighting irregularity compensation are discussed.

  10. Experiences in applying optimization techniques to configurations for the Control of Flexible Structures (COFS) program

    Science.gov (United States)

    Walsh, Joanne L.

    1989-01-01

    Optimization procedures are developed to systematically provide closely-spaced vibration frequencies. A general purpose finite-element program for eigenvalue and sensitivity analyses is combined with formal mathematical programming techniques. Results are presented for three studies. The first study uses a simple model to obtain a design with two pairs of closely-spaced frequencies. Two formulations are developed: an objective function-based formulation and constraint-based formulation for the frequency spacing. It is found that conflicting goals are handled better by a constraint-based formulation. The second study uses a detailed model to obtain a design with one pair of closely-spaced frequencies while satisfying requirements on local member frequencies and manufacturing tolerances. Two formulations are developed. Both the constraint-based and the objective function-based formulations perform reasonably well and converge to the same results. However, no feasible design solution exists which satisfies all design requirements for the choices of design variables and the upper and lower design variable values used. More design freedom is needed to achieve a fully satisfactory design. The third study is part of a redesign activity in which a detailed model is used.

  11. Digital Image Correlation Techniques Applied to Large Scale Rocket Engine Testing

    Science.gov (United States)

    Gradl, Paul R.

    2016-01-01

    Rocket engine hot-fire ground testing is necessary to understand component performance, reliability and engine system interactions during development. The J-2X upper stage engine completed a series of developmental hot-fire tests that derived performance of the engine and components, validated analytical models and provided the necessary data to identify where design changes, process improvements and technology development were needed. The J-2X development engines were heavily instrumented to provide the data necessary to support these activities which enabled the team to investigate any anomalies experienced during the test program. This paper describes the development of an optical digital image correlation technique to augment the data provided by traditional strain gauges which are prone to debonding at elevated temperatures and limited to localized measurements. The feasibility of this optical measurement system was demonstrated during full scale hot-fire testing of J-2X, during which a digital image correlation system, incorporating a pair of high speed cameras to measure three-dimensional, real-time displacements and strains was installed and operated under the extreme environments present on the test stand. The camera and facility setup, pre-test calibrations, data collection, hot-fire test data collection and post-test analysis and results are presented in this paper.

  12. Morphological analysis of the flippers in the Franciscana dolphin, Pontoporia blainvillei, applying X-ray technique.

    Science.gov (United States)

    Del Castillo, Daniela Laura; Panebianco, María Victoria; Negri, María Fernanda; Cappozzo, Humberto Luis

    2014-07-01

    Pectoral flippers of cetaceans function to provide stability and maneuverability during locomotion. Directional asymmetry (DA) is a common feature among odontocete cetaceans, as well as sexual dimorphism (SD). For the first time DA, allometry, physical maturity, and SD of the flipper skeleton--by X-ray technique--of Pontoporia blainvillei were analyzed. The number of carpals, metacarpals, phalanges, and morphometric characters from the humerus, radius, ulna, and digit two were studied in franciscana dolphins from Buenos Aires, Argentina. The number of visible epiphyses and their degree of fusion at the proximal and distal ends of the humerus, radius, and ulna were also analyzed. The flipper skeleton was symmetrical, showing a negative allometric trend, with similar growth patterns in both sexes with the exception of the width of the radius (P ≤ 0.01). SD was found on the number of phalanges of digit two (P ≤ 0.01), ulna and digit two lengths. Females showed a higher relative ulna length and shorter relative digit two length, and the opposite occurred in males (P ≤ 0.01). Epiphyseal fusion pattern proved to be a tool to determine dolphin's age; franciscana dolphins with a mature flipper were, at least, four years old. This study indicates that the flippers of franciscana dolphins are symmetrical; both sexes show a negative allometric trend; SD is observed in radius, ulna, and digit two; and flipper skeleton allows determine the age class of the dolphins. PMID:24700648

  13. Applying advanced imaging techniques to a murine model of orthotopic osteosarcoma

    Directory of Open Access Journals (Sweden)

    Matthew Lawrence Broadhead

    2015-08-01

    Full Text Available IntroductionReliable animal models are required to evaluate novel treatments for osteosarcoma. In this study, the aim was to implement advanced imaging techniques in a murine model of orthotopic osteosarcoma to improve disease modeling and the assessment of primary and metastatic disease.Materials and methodsIntra-tibial injection of luciferase-tagged OPGR80 murine osteosarcoma cells was performed in Balb/c nude mice. Treatment agent (pigment epithelium-derived factor; PEDF was delivered to the peritoneal cavity. Primary tumors and metastases were evaluated by in vivo bioluminescent assays, micro-computed tomography, [18F]-Fluoride-PET and [18F]-FDG-PET. Results[18F]-Fluoride-PET was more sensitive than [18F]-FDG-PET for detecting early disease. Both [18F]-Fluoride-PET and [18F]-FDG-PET showed progressive disease in the model, with 4-fold and 2-fold increases in SUV (p<0.05 by the study endpoint, respectively. In vivo bioluminescent assay showed that systemically delivered PEDF inhibited growth of primary osteosarcoma.DiscussionApplication of [18F]-Fluoride-PET and [18F]-FDG-PET to an established murine model of orthotopic osteosarcoma has improved the assessment of disease. The use of targeted imaging should prove beneficial for the evaluation of new approaches to osteosarcoma therapy.

  14. Laser granulometry: A comparative study the techniques of sieving and elutriation applied to pozzoianic materials

    Directory of Open Access Journals (Sweden)

    Frías, M.

    1990-03-01

    Full Text Available Laser granulometry is a rapid method for determination of particle size distribution in both dry and wet phases. The present paper, diffraction technique by laser beams is an application to the granulometric studies of pozzolanic materials in suspension. Theses granulometric analysis are compared to those obtained with the Alpine pneumatic-siever and Bahco elutriator-centrifuge.

    La granulometria laser es un método rápido para determinar distribuciones de tamaños de partícula tanto en vía seca como en húmeda. En este trabajo la técnica de difracción por rayos laser se aplica al estudio granulométrico de materiales puzolánicos en suspensión. Estos análisis granulométricos se cotejan con los obtenidos con la técnica tamizador-neumático Alpine y elutriador-centrifugador Bahco.

  15. Blade Displacement Measurement Technique Applied to a Full-Scale Rotor Test

    Science.gov (United States)

    Abrego, Anita I.; Olson, Lawrence E.; Romander, Ethan A.; Barrows, Danny A.; Burner, Alpheus W.

    2012-01-01

    Blade displacement measurements using multi-camera photogrammetry were acquired during the full-scale wind tunnel test of the UH-60A Airloads rotor, conducted in the National Full-Scale Aerodynamics Complex 40- by 80-Foot Wind Tunnel. The objectives were to measure the blade displacement and deformation of the four rotor blades as they rotated through the entire rotor azimuth. These measurements are expected to provide a unique dataset to aid in the development and validation of rotorcraft prediction techniques. They are used to resolve the blade shape and position, including pitch, flap, lag and elastic deformation. Photogrammetric data encompass advance ratios from 0.15 to slowed rotor simulations of 1.0, thrust coefficient to rotor solidity ratios from 0.01 to 0.13, and rotor shaft angles from -10.0 to 8.0 degrees. An overview of the blade displacement measurement methodology and system development, descriptions of image processing, uncertainty considerations, preliminary results covering static and moderate advance ratio test conditions and future considerations are presented. Comparisons of experimental and computational results for a moderate advance ratio forward flight condition show good trend agreements, but also indicate significant mean discrepancies in lag and elastic twist. Blade displacement pitch measurements agree well with both the wind tunnel commanded and measured values.

  16. A Morphing Technique Applied to Lung Motions in Radiotherapy: Preliminary Results

    Directory of Open Access Journals (Sweden)

    R. Laurent

    2010-01-01

    Full Text Available Organ motion leads to dosimetric uncertainties during a patient’s treatment. Much work has been done to quantify the dosimetric effects of lung movement during radiation treatment. There is a particular need for a good description and prediction of organ motion. To describe lung motion more precisely, we have examined the possibility of using a computer technique: a morphing algorithm. Morphing is an iterative method which consists of blending one image into another image. To evaluate the use of morphing, Four Dimensions Computed Tomography (4DCT acquisition of a patient was performed. The lungs were automatically segmented for different phases, and morphing was performed using the end-inspiration and the end-expiration phase scans only. Intermediate morphing files were compared with 4DCT intermediate images. The results showed good agreement between morphing images and 4DCT images: fewer than 2 % of the 512 by 256 voxels were wrongly classified as belonging/not belonging to a lung section. This paper presents preliminary results, and our morphing algorithm needs improvement. We can infer that morphing offers considerable advantages in terms of radiation protection of the patient during the diagnosis phase, handling of artifacts, definition of organ contours and description of organ motion.

  17. Linear and non-linear control techniques applied to actively lubricated journal bearings

    Science.gov (United States)

    Nicoletti, R.; Santos, I. F.

    2003-03-01

    The main objectives of actively lubricated bearings are the simultaneous reduction of wear and vibration between rotating and stationary machinery parts. For reducing wear and dissipating vibration energy until certain limits, one can use the conventional hydrodynamic lubrication. For further reduction of shaft vibrations one can use the active lubrication action, which is based on injecting pressurized oil into the bearing gap through orifices machined in the bearing sliding surface. The design and efficiency of some linear (PD, PI and PID) and a non-linear controller, applied to a tilting-pad journal bearing, are analysed and discussed. Important conclusions about the application of integral controllers, responsible for changing the rotor-bearing equilibrium position and consequently the "passive" oil film damping coefficients, are achieved. Numerical results show an effective vibration reduction of unbalance response of a rigid rotor, where the PD and the non-linear P controllers show better performance for the frequency range of study (0-80 Hz). The feasibility of eliminating rotor-bearing instabilities (phenomena of whirl) by using active lubrication is also investigated, illustrating clearly one of its most promising applications.

  18. A non-intrusive measurement technique applying CARS for concentration measurement in a gas mixing flow

    CERN Document Server

    Yamamoto, Ken; Moriya, Madoka; Kuriyama, Reiko; Sato, Yohei

    2015-01-01

    Coherent anti-Stokes Raman scattering (CARS) microscope system was built and applied to a non-intrusive gas concentration measurement of a mixing flow in a millimeter-scale channel. Carbon dioxide and nitrogen were chosen as test fluids and CARS signals from the fluids were generated by adjusting the wavelengths of the Pump and the Stokes beams. The generated CARS signals, whose wavelengths are different from those of the Pump and the Stokes beams, were captured by an EM-CCD camera after filtering out the excitation beams. A calibration experiment was performed in order to confirm the applicability of the built-up CARS system by measuring the intensity of the CARS signal from known concentrations of the samples. After confirming that the measured CARS intensity was proportional to the second power of the concentrations as was theoretically predicted, the CARS intensities in the gas mixing flow channel were measured. Ten different measurement points were set and concentrations of both carbon dioxide and nitrog...

  19. Techniques that Link Extreme Events to the Large Scale, Applied to California Heat Waves

    Science.gov (United States)

    Grotjahn, R.

    2015-12-01

    Understanding the mechanisms how Californian Central Valley (CCV) summer extreme hot spells develop is very important since the events have major impacts on the economy and human safety. Results from a series of CCV heat wave studies will be presented, emphasizing the techniques used. Key larger scale elements are identified statistically that are also consistent with synoptic and dynamic understanding of what must be present during extreme heat. Beyond providing a clear synoptic explanation, these key elements have high predictability, in part because soil moisture has little annual variation in the heavily-irrigated CCV. In turn, the predictability naturally leads to an effective tool to assess climate model simulation of these heat waves in historical and future climate scenarios. (Does the model develop extreme heat for the correct reasons?) Further work identified that these large scale elements arise in two quite different ways: one from expansion southwestward of a pre-existing heat wave in southwest Canada, the other formed in place from parcels traversing the North Pacific. The pre-existing heat wave explains an early result showing correlation between heat waves in Sacramento California, and other locations along the US west coast, including distant Seattle Washington. CCV heat waves can be preceded by unusually strong tropical Indian Ocean and Indonesian convection, this partial link may occur through an Asian subtropical jet wave guide. Another link revealed by diagnostics is a middle and higher latitude source of wave activity in Siberia and East Asia that also leads to the development of the CCV heat wave. This talk will address as many of these results and the tools used to obtain them as is reasonable within the available time.

  20. Applying morphologic techniques to evaluate hotdogs: what is in the hotdogs we eat?

    Science.gov (United States)

    Prayson, Brigid E; McMahon, James T; Prayson, Richard A

    2008-04-01

    Americans consume billions of hotdogs per year resulting in more than a billion dollars in retail sales. Package labels typically list some type of meat as the primary ingredient. The purpose of this study is to assess the meat and water content of several hotdog brands to determine if the package labels are accurate. Eight brands of hotdogs were evaluated for water content by weight. A variety of routine techniques in surgical pathology including routine light microscopy with hematoxylin-eosin-stained sections, special staining, immunohistochemistry, and electron microscopy were used to assess for meat content and for other recognizable components. Package labels indicated that the top-listed ingredient in all 8 brands was meat; the second listed ingredient was water (n = 6) and another type of meat (n = 2). Water comprised 44% to 69% (median, 57%) of the total weight. Meat content determined by microscopic cross-section analysis ranged from 2.9% to 21.2% (median, 5.7%). The cost per hotdog ($0.12-$0.42) roughly correlated with meat content. A variety of tissues were observed besides skeletal muscle including bone (n = 8), collagen (n = 8), blood vessels (n = 8), plant material (n = 8), peripheral nerve (n = 7), adipose (n = 5), cartilage (n = 4), and skin (n = 1). Glial fibrillary acidic protein immunostaining was not observed in any of the hotdogs. Lipid content on oil red O staining was graded as moderate in 3 hotdogs and marked in 5 hotdogs. Electron microscopy showed recognizable skeletal muscle with evidence of degenerative changes. In conclusion, hotdog ingredient labels are misleading; most brands are more than 50% water by weight. The amount of meat (skeletal muscle) in most brands comprised less than 10% of the cross-sectional surface area. More expensive brands generally had more meat. All hotdogs contained other tissue types (bone and cartilage) not related to skeletal muscle; brain tissue was not present. PMID:18325469

  1. BiasMDP: Carrier lifetime characterization technique with applied bias voltage

    Energy Technology Data Exchange (ETDEWEB)

    Jordan, Paul M., E-mail: paul.jordan@namlab.com; Simon, Daniel K.; Dirnstorfer, Ingo [Nanoelectronic Materials Laboratory gGmbH (NaMLab), Nöthnitzer Straße 64, 01187 Dresden (Germany); Mikolajick, Thomas [Nanoelectronic Materials Laboratory gGmbH (NaMLab), Nöthnitzer Straße 64, 01187 Dresden (Germany); Technische Universität Dresden, Institut für Halbleiter- und Mikrosystemtechnik, 01062 Dresden (Germany)

    2015-02-09

    A characterization method is presented, which determines fixed charge and interface defect densities in passivation layers. This method bases on a bias voltage applied to an electrode on top of the passivation layer. During a voltage sweep, the effective carrier lifetime is measured by means of microwave detected photoconductivity. When the external voltage compensates the electric field of the fixed charges, the lifetime drops to a minimum value. This minimum value correlates to the flat band voltage determined in reference impedance measurements. This correlation is measured on p-type silicon passivated by Al{sub 2}O{sub 3} and Al{sub 2}O{sub 3}/HfO{sub 2} stacks with different fixed charge densities and layer thicknesses. Negative fixed charges with densities of 3.8 × 10{sup 12 }cm{sup −2} and 0.7 × 10{sup 12 }cm{sup −2} are determined for Al{sub 2}O{sub 3} layers without and with an ultra-thin HfO{sub 2} interface, respectively. The voltage and illumination dependencies of the effective carrier lifetime are simulated with Shockley Read Hall surface recombination at continuous defects with parabolic capture cross section distributions for electrons and holes. The best match with the measured data is achieved with a very low interface defect density of 1 × 10{sup 10 }eV{sup −1} cm{sup −2} for the Al{sub 2}O{sub 3} sample with HfO{sub 2} interface.

  2. Product Chemistry and Process Efficiency of Biomass Torrefaction, Pyrolysis and Gasification Studied by High-Throughput Techniques and Multivariate Analysis

    Science.gov (United States)

    Xiao, Li

    Despite the great passion and endless efforts on development of renewable energy from biomass, the commercialization and scale up of biofuel production is still under pressure and facing challenges. New ideas and facilities are being tested around the world targeting at reducing cost and improving product value. Cutting edge technologies involving analytical chemistry, statistics analysis, industrial engineering, computer simulation, and mathematics modeling, etc. keep integrating modern elements into this classic research. One of those challenges of commercializing biofuel production is the complexity from chemical composition of biomass feedstock and the products. Because of this, feedstock selection and process optimization cannot be conducted efficiently. This dissertation attempts to further evaluate biomass thermal decomposition process using both traditional methods and advanced technique (Pyrolysis Molecular Beam Mass Spectrometry). Focus has been made on data base generation of thermal decomposition products from biomass at different temperatures, finding out the relationship between traditional methods and advanced techniques, evaluating process efficiency and optimizing reaction conditions, comparison of typically utilized biomass feedstock and new search on innovative species for economical viable feedstock preparation concepts, etc. Lab scale quartz tube reactors and 80il stainless steel sample cups coupled with auto-sampling system were utilized to simulate the complicated reactions happened in real fluidized or entrained flow reactors. Two main high throughput analytical techniques used are Near Infrared Spectroscopy (NIR) and Pyrolysis Molecular Beam Mass Spectrometry (Py-MBMS). Mass balance, carbon balance, and product distribution are presented in detail. Variations of thermal decomposition temperature range from 200°C to 950°C. Feedstocks used in the study involve typical hardwood and softwood (red oak, white oak, yellow poplar, loblolly pine

  3. Organic chemistry

    International Nuclear Information System (INIS)

    The activities of the mycotoxin research group are discussed. This includes the isolation and structure determination of mycotoxins, plant products, the biosyntheris of mycotoxins, the synthesis and characteristics of steroids, the synthesis and mechanistic aspects of heterocyclic chemistry and the functionality of steroids over long distances. Nmr spectra and mass spectroscopy are some of the techniques used

  4. APPLIED PHYTO-REMEDIATION TECHNIQUES USING HALOPHYTES FOR OIL AND BRINE SPILL SCARS

    Energy Technology Data Exchange (ETDEWEB)

    M.L. Korphage; Bruce G. Langhus; Scott Campbell

    2003-03-01

    Produced salt water from historical oil and gas production was often managed with inadequate care and unfortunate consequences. In Kansas, the production practices in the 1930's and 1940's--before statewide anti-pollution laws--were such that fluids were often produced to surface impoundments where the oil would segregate from the salt water. The oil was pumped off the pits and the salt water was able to infiltrate into the subsurface soil zones and underlying bedrock. Over the years, oil producing practices were changed so that segregation of fluids was accomplished in steel tanks and salt water was isolated from the natural environment. But before that could happen, significant areas of the state were scarred by salt water. These areas are now in need of economical remediation. Remediation of salt scarred land can be facilitated with soil amendments, land management, and selection of appropriate salt tolerant plants. Current research on the salt scars around the old Leon Waterflood, in Butler County, Kansas show the relative efficiency of remediation options. Based upon these research findings, it is possible to recommend cost efficient remediation techniques for slight, medium, and heavy salt water damaged soil. Slight salt damage includes soils with Electrical Conductivity (EC) values of 4.0 mS/cm or less. Operators can treat these soils with sufficient amounts of gypsum, install irrigation systems, and till the soil. Appropriate plants can be introduced via transplants or seeded. Medium salt damage includes soils with EC values between 4.0 and 16 mS/cm. Operators will add amendments of gypsum, till the soil, and arrange for irrigation. Some particularly salt tolerant plants can be added but most planting ought to be reserved until the second season of remediation. Severe salt damage includes soil with EC values in excess of 16 mS/cm. Operators will add at least part of the gypsum required, till the soil, and arrange for irrigation. The following

  5. Lipase immobilized by different techniques on various support materials applied in oil hydrolysis

    Directory of Open Access Journals (Sweden)

    VILMA MINOVSKA

    2005-04-01

    Full Text Available Batch hydrolysis of olive oil was performed by Candida rugosa lipase immobilized on Amberlite IRC-50 and Al2O3. These two supports were selected out of 16 carriers: inorganic materials (sand, silica gel, infusorial earth, Al2O3, inorganic salts (CaCO3, CaSO4, ion-exchange resins (Amberlite IRC-50 and IR-4B, Dowex 2X8, a natural resin (colophony, a natural biopolymer (sodium alginate, synthetic polymers (polypropylene, polyethylene and zeolites. Lipase immobilization was carried out by simple adsorption, adsorption followed by cross-linking, adsorption on ion-exchange resins, combined adsorption and precipitation, pure precipitation and gel entrapment. The suitability of the supports and techniques for the immobilization of lipase was evaluated by estimating the enzyme activity, protein loading, immobilization efficiency and reusability of the immobilizates. Most of the immobilizates exhibited either a low enzyme activity or difficulties during the hydrolytic reaction. Only those prepared by ionic adsorption on Amberlite IRC-50 and by combined adsorption and precipitation on Al2O3 showed better activity, 2000 and 430 U/g support, respectively, and demonstrated satisfactory behavior when used repeatedly. The hydrolysis was studied as a function of several parameters: surfactant concentration, enzyme concentration, pH and temperature. The immobilized preparation with Amberlite IRC-50 was stable and active in the whole range of pH (4 to 9 and temperature (20 to 50 °C, demonstrating a 99% degree of hydrolysis. In repeated usage, it was stable and active having a half-life of 16 batches, which corresponds to an operation time of 384 h. Its storage stability was remarkable too, since after 9 months it had lost only 25 % of the initial activity. The immobilizate with Al22O3 was less stable and less active. At optimal environmental conditions, the degree of hydrolysis did not exceed 79 %. In repeated usage, after the fourth batch, the degree of

  6. Statistical Mechanics Ideas and Techniques Applied to Selected Problems in Ecology

    Directory of Open Access Journals (Sweden)

    Hugo Fort

    2013-11-01

    Full Text Available Ecosystem dynamics provides an interesting arena for the application of a plethora concepts and techniques from statistical mechanics. Here I review three examples corresponding each one to an important problem in ecology. First, I start with an analytical derivation of clumpy patterns for species relative abundances (SRA empirically observed in several ecological communities involving a high number n of species, a phenomenon which have puzzled ecologists for decades. An interesting point is that this derivation uses results obtained from a statistical mechanics model for ferromagnets. Second, going beyond the mean field approximation, I study the spatial version of a popular ecological model involving just one species representing vegetation. The goal is to address the phenomena of catastrophic shifts—gradual cumulative variations in some control parameter that suddenly lead to an abrupt change in the system—illustrating it by means of the process of desertification of arid lands. The focus is on the aggregation processes and the effects of diffusion that combined lead to the formation of non trivial spatial vegetation patterns. It is shown that different quantities—like the variance, the two-point correlation function and the patchiness—may serve as early warnings for the desertification of arid lands. Remarkably, in the onset of a desertification transition the distribution of vegetation patches exhibits scale invariance typical of many physical systems in the vicinity a phase transition. I comment on similarities of and differences between these catastrophic shifts and paradigmatic thermodynamic phase transitions like the liquid-vapor change of state for a fluid. Third, I analyze the case of many species interacting in space. I choose tropical forests, which are mega-diverse ecosystems that exhibit remarkable dynamics. Therefore these ecosystems represent a research paradigm both for studies of complex systems dynamics as well as to

  7. Mass retrieval and a posteriori error analysis using non-linear inverse modelling techniques applied to atmospheric tracers

    International Nuclear Information System (INIS)

    Full text: An account on recent progress in the inverse modelling of pollutants with first order chemistry (tracers, radionuclides, etc.) is given. The methods, which are variational and whose general principles have been presented in earlier EGU assemblies, are fundamentally nonlinear. They are meant to perform efficiently on the reconstruction of sources of accidental type (typically ETEX, Chernobyl.) In this report, the emphasis is put on two recent developments: First, the problem of finding the total released mass through nonlinear methods is first studied. Because the positivity of sources is taken into account, a non-zero prior mass scale appears in the background term. The cost function has a nonquadratic dependence on this parameter. This rules out many known parameter estimation techniques, when one has to choose this parameter prior to the inversion. Secondly, a posterior analysis of the retrieved source and retrieved errors is then conducted. It generalizes well-known data assimilation results that make use of the Hessian of the cost function. Closely related is the second order sensitivity analysis on the source and retrieved errors, of special significance for inverse modelling. (author)

  8. Fielding the magnetically applied pressure-shear technique on the Z accelerator (completion report for MRT 4519).

    Energy Technology Data Exchange (ETDEWEB)

    Alexander, C. Scott; Haill, Thomas A.; Dalton, Devon Gardner; Rovang, Dean Curtis; Lamppa, Derek C.

    2013-09-01

    The recently developed Magnetically Applied Pressure-Shear (MAPS) experimental technique to measure material shear strength at high pressures on magneto-hydrodynamic (MHD) drive pulsed power platforms was fielded on August 16, 2013 on shot Z2544 utilizing hardware set A0283A. Several technical and engineering challenges were overcome in the process leading to the attempt to measure the dynamic strength of NNSA Ta at 50 GPa. The MAPS technique relies on the ability to apply an external magnetic field properly aligned and time correlated with the MHD pulse. The load design had to be modified to accommodate the external field coils and additional support was required to manage stresses from the pulsed magnets. Further, this represents the first time transverse velocity interferometry has been applied to diagnose a shot at Z. All subsystems performed well with only minor issues related to the new feed design which can be easily addressed by modifying the current pulse shape. Despite the success of each new component, the experiment failed to measure strength in the samples due to spallation failure, most likely in the diamond anvils. To address this issue, hydrocode simulations are being used to evaluate a modified design using LiF windows to minimize tension in the diamond and prevent spall. Another option to eliminate the diamond material from the experiment is also being investigated.

  9. Bubble and foam chemistry

    CERN Document Server

    Pugh, Robert J

    2016-01-01

    This indispensable guide will equip the reader with a thorough understanding of the field of foaming chemistry. Assuming only basic theoretical background knowledge, the book provides a straightforward introduction to the principles and properties of foams and foaming surfactants. It discusses the key ideas that underpin why foaming occurs, how it can be avoided and how different degrees of antifoaming can be achieved, and covers the latest test methods, including laboratory and industrial developed techniques. Detailing a variety of different kinds of foams, from wet detergents and food foams, to polymeric, material and metal foams, it connects theory to real-world applications and recent developments in foam research. Combining academic and industrial viewpoints, this book is the definitive stand-alone resource for researchers, students and industrialists working on foam technology, colloidal systems in the field of chemical engineering, fluid mechanics, physical chemistry, and applied physics.

  10. Quantum chemistry

    CERN Document Server

    Lowe, John P

    2006-01-01

    Lowe's new edition assumes little mathematical or physical sophistication and emphasizes an understanding of the techniques and results of quantum chemistry. It can serve as a primary text in quantum chemistry courses, and enables students and researchers to comprehend the current literature. This third edition has been thoroughly updated and includes numerous new exercises to facilitate self-study and solutions to selected exercises.* Assumes little initial mathematical or physical sophistication, developing insights and abilities in the context of actual problems* Provides thorough treatment

  11. Pattern-recognition techniques applied to performance monitoring of the DSS 13 34-meter antenna control assembly

    Science.gov (United States)

    Mellstrom, J. A.; Smyth, P.

    1991-01-01

    The results of applying pattern recognition techniques to diagnose fault conditions in the pointing system of one of the Deep Space network's large antennas, the DSS 13 34-meter structure, are discussed. A previous article described an experiment whereby a neural network technique was used to identify fault classes by using data obtained from a simulation model of the Deep Space Network (DSN) 70-meter antenna system. Described here is the extension of these classification techniques to the analysis of real data from the field. The general architecture and philosophy of an autonomous monitoring paradigm is described and classification results are discussed and analyzed in this context. Key features of this approach include a probabilistic time-varying context model, the effective integration of signal processing and system identification techniques with pattern recognition algorithms, and the ability to calibrate the system given limited amounts of training data. Reported here are recognition accuracies in the 97 to 98 percent range for the particular fault classes included in the experiments.

  12. A novel technique of in situ phase-shift interferometry applied for faint dissolution of bulky montmorillonite in alkaline solution

    International Nuclear Information System (INIS)

    The effect of alkaline pH on the dissolution rate of bulky aggregated montmorillonite samples at 23°C was investigated for the first time by using an enhanced phase-shift interferometry technique combined with an internal refraction interferometry method developed for this study. This technique was applied to provide a molecular resolution during the optical observation of the dissolution phenomena in real time and in situ while remaining noninvasive. A theoretical normal resolution limit of this technique was 0.78 nm in water for opaque material, but was limited to 6.6 nm for montmorillonite due to the transparency of the montmorillonite crystal. Normal dissolution velocities as low as 1 × 10-4 to 1 × 10-3 nm/s were obtained directly by using the measured temporal change in height of montmorillonite samples set in a reaction cell. The molar dissolution fluxes of montmorillonite obtained in this study gave considerably faster dissolution rates in comparison to those obtained in previous investigations by solution analysis methods. The pH dependence of montmorillonite dissolution rate determined in this study was qualitatively in good agreement with those reported in the previous investigations. The dissolution rates to be used in safety assessments of geological repositories for radioactive wastes should be obtained for bulky samples. This goal has been difficult to achieve using conventional powder experiment technique and solution analysis method, but has been shown to be feasible using the enhanced phase-shift interferometry. (author)

  13. Applying a nonlinear, pitch-catch, ultrasonic technique for the detection of kissing bonds in friction stir welds.

    Science.gov (United States)

    Delrue, Steven; Tabatabaeipour, Morteza; Hettler, Jan; Van Den Abeele, Koen

    2016-05-01

    Friction stir welding (FSW) is a promising technology for the joining of aluminum alloys and other metallic admixtures that are hard to weld by conventional fusion welding. Although FSW generally provides better fatigue properties than traditional fusion welding methods, fatigue properties are still significantly lower than for the base material. Apart from voids, kissing bonds for instance, in the form of closed cracks propagating along the interface of the stirred and heat affected zone, are inherent features of the weld and can be considered as one of the main causes of a reduced fatigue life of FSW in comparison to the base material. The main problem with kissing bond defects in FSW, is that they currently are very difficult to detect using existing NDT methods. Besides, in most cases, the defects are not directly accessible from the exposed surface. Therefore, new techniques capable of detecting small kissing bond flaws need to be introduced. In the present paper, a novel and practical approach is introduced based on a nonlinear, single-sided, ultrasonic technique. The proposed inspection technique uses two single element transducers, with the first transducer transmitting an ultrasonic signal that focuses the ultrasonic waves at the bottom side of the sample where cracks are most likely to occur. The large amount of energy at the focus activates the kissing bond, resulting in the generation of nonlinear features in the wave propagation. These nonlinear features are then captured by the second transducer operating in pitch-catch mode, and are analyzed, using pulse inversion, to reveal the presence of a defect. The performance of the proposed nonlinear, pitch-catch technique, is first illustrated using a numerical study of an aluminum sample containing simple, vertically oriented, incipient cracks. Later, the proposed technique is also applied experimentally on a real-life friction stir welded butt joint containing a kissing bond flaw. PMID:26921559

  14. Applying a nonlinear, pitch-catch, ultrasonic technique for the detection of kissing bonds in friction stir welds.

    Science.gov (United States)

    Delrue, Steven; Tabatabaeipour, Morteza; Hettler, Jan; Van Den Abeele, Koen

    2016-05-01

    Friction stir welding (FSW) is a promising technology for the joining of aluminum alloys and other metallic admixtures that are hard to weld by conventional fusion welding. Although FSW generally provides better fatigue properties than traditional fusion welding methods, fatigue properties are still significantly lower than for the base material. Apart from voids, kissing bonds for instance, in the form of closed cracks propagating along the interface of the stirred and heat affected zone, are inherent features of the weld and can be considered as one of the main causes of a reduced fatigue life of FSW in comparison to the base material. The main problem with kissing bond defects in FSW, is that they currently are very difficult to detect using existing NDT methods. Besides, in most cases, the defects are not directly accessible from the exposed surface. Therefore, new techniques capable of detecting small kissing bond flaws need to be introduced. In the present paper, a novel and practical approach is introduced based on a nonlinear, single-sided, ultrasonic technique. The proposed inspection technique uses two single element transducers, with the first transducer transmitting an ultrasonic signal that focuses the ultrasonic waves at the bottom side of the sample where cracks are most likely to occur. The large amount of energy at the focus activates the kissing bond, resulting in the generation of nonlinear features in the wave propagation. These nonlinear features are then captured by the second transducer operating in pitch-catch mode, and are analyzed, using pulse inversion, to reveal the presence of a defect. The performance of the proposed nonlinear, pitch-catch technique, is first illustrated using a numerical study of an aluminum sample containing simple, vertically oriented, incipient cracks. Later, the proposed technique is also applied experimentally on a real-life friction stir welded butt joint containing a kissing bond flaw.

  15. Multivariate class modeling techniques applied to multielement analysis for the verification of the geographical origin of chili pepper.

    Science.gov (United States)

    Naccarato, Attilio; Furia, Emilia; Sindona, Giovanni; Tagarelli, Antonio

    2016-09-01

    Four class-modeling techniques (soft independent modeling of class analogy (SIMCA), unequal dispersed classes (UNEQ), potential functions (PF), and multivariate range modeling (MRM)) were applied to multielement distribution to build chemometric models able to authenticate chili pepper samples grown in Calabria respect to those grown outside of Calabria. The multivariate techniques were applied by considering both all the variables (32 elements, Al, As, Ba, Ca, Cd, Ce, Co, Cr, Cs, Cu, Dy, Fe, Ga, La, Li, Mg, Mn, Na, Nd, Ni, Pb, Pr, Rb, Sc, Se, Sr, Tl, Tm, V, Y, Yb, Zn) and variables selected by means of stepwise linear discriminant analysis (S-LDA). In the first case, satisfactory and comparable results in terms of CV efficiency are obtained with the use of SIMCA and MRM (82.3 and 83.2% respectively), whereas MRM performs better than SIMCA in terms of forced model efficiency (96.5%). The selection of variables by S-LDA permitted to build models characterized, in general, by a higher efficiency. MRM provided again the best results for CV efficiency (87.7% with an effective balance of sensitivity and specificity) as well as forced model efficiency (96.5%). PMID:27041319

  16. 2D and 3D optical diagnostic techniques applied to Madonna dei Fusi by Leonardo da Vinci

    Science.gov (United States)

    Fontana, R.; Gambino, M. C.; Greco, M.; Marras, L.; Materazzi, M.; Pampaloni, E.; Pelagotti, A.; Pezzati, L.; Poggi, P.; Sanapo, C.

    2005-06-01

    3D measurement and modelling have been traditionally applied to statues, buildings, archeological sites or similar large structures, but rarely to paintings. Recently, however, 3D measurements have been performed successfully also on easel paintings, allowing to detect and document the painting's surface. We used 3D models to integrate the results of various 2D imaging techniques on a common reference frame. These applications show how the 3D shape information, complemented with 2D colour maps as well as with other types of sensory data, provide the most interesting information. The 3D data acquisition was carried out by means of two devices: a high-resolution laser micro-profilometer, composed of a commercial distance meter mounted on a scanning device, and a laser-line scanner. The 2D data acquisitions were carried out using a scanning device for simultaneous RGB colour imaging and IR reflectography, and a UV fluorescence multispectral image acquisition system. We present here the results of the techniques described, applied to the analysis of an important painting of the Italian Reinassance: `Madonna dei Fusi', attributed to Leonardo da Vinci.

  17. Multivariate class modeling techniques applied to multielement analysis for the verification of the geographical origin of chili pepper.

    Science.gov (United States)

    Naccarato, Attilio; Furia, Emilia; Sindona, Giovanni; Tagarelli, Antonio

    2016-09-01

    Four class-modeling techniques (soft independent modeling of class analogy (SIMCA), unequal dispersed classes (UNEQ), potential functions (PF), and multivariate range modeling (MRM)) were applied to multielement distribution to build chemometric models able to authenticate chili pepper samples grown in Calabria respect to those grown outside of Calabria. The multivariate techniques were applied by considering both all the variables (32 elements, Al, As, Ba, Ca, Cd, Ce, Co, Cr, Cs, Cu, Dy, Fe, Ga, La, Li, Mg, Mn, Na, Nd, Ni, Pb, Pr, Rb, Sc, Se, Sr, Tl, Tm, V, Y, Yb, Zn) and variables selected by means of stepwise linear discriminant analysis (S-LDA). In the first case, satisfactory and comparable results in terms of CV efficiency are obtained with the use of SIMCA and MRM (82.3 and 83.2% respectively), whereas MRM performs better than SIMCA in terms of forced model efficiency (96.5%). The selection of variables by S-LDA permitted to build models characterized, in general, by a higher efficiency. MRM provided again the best results for CV efficiency (87.7% with an effective balance of sensitivity and specificity) as well as forced model efficiency (96.5%).

  18. Radiation Chemistry

    Science.gov (United States)

    Wojnárovits, L.

    Ionizing radiation causes chemical changes in the molecules of the interacting medium. The initial molecules change to new molecules, resulting in changes of the physical, chemical, and eventually biological properties of the material. For instance, water decomposes to its elements H2 and O2. In polymers, degradation and crosslinking take place. In biopolymers, e.g., DNS strand breaks and other alterations occur. Such changes are to be avoided in some cases (radiation protection), however, in other cases they are used for technological purposes (radiation processing). This chapter introduces radiation chemistry by discussing the sources of ionizing radiation (radionuclide sources, machine sources), absorption of radiation energy, techniques used in radiation chemistry research, and methods of absorbed energy (absorbed dose) measurements. Radiation chemistry of different classes of inorganic (water and aqueous solutions, inorganic solids, ionic liquids (ILs)) and organic substances (hydrocarbons, halogenated compounds, polymers, and biomolecules) is discussed in concise form together with theoretical and experimental backgrounds. An essential part of the chapter is the introduction of radiation processing technologies in the fields of polymer chemistry, food processing, and sterilization. The application of radiation chemistry to nuclear technology and to protection of environment (flue gas treatment, wastewater treatment) is also discussed.

  19. 应用化学专业实践教学调研分析%An Investigation on Practice Teaching of Applied Chemistry

    Institute of Scientific and Technical Information of China (English)

    叶志刚; 彭游; 付小兰

    2012-01-01

    文章对应用化学专业校外实践教学状况及存在问题进行了调查和研究,从提高实践教学的质量与水平、实习基地建设、实习内容和时间改革、双师型队伍建设和实习学生的权益和安全保护等五个方面探讨了实践教学改革,并提出了加强校外实践教学的对策和方法。%The Research Report on pattern and practice with enterprises participating of practice teaching of Applied Chemistry Profession. Practical teaching reform were discussed in five areas, including Improve the quality and level of practice teaching, practice base construction, practical content and timing of reform, dual-qualified team-building and the internship students' rights and security. And some suggestions and countermeasures of Practice teaching were raised.

  20. Applied research on air pollution using nuclear-related analytical techniques. Report on the second research co-ordination meeting

    International Nuclear Information System (INIS)

    A co-ordinated research programme (CRP) on applied research on air pollution using nuclear-related techniques is a global CRP which started in 1992, and is scheduled to run until early 1997. The purpose of this CRP is to promote the use of nuclear analytical techniques in air pollution studies, e.g. NAA, XRF, and PIXE for the analysis of toxic and other trace elements in air particulate matter. The main purposes of the core programme are i) to support the use of nuclear and nuclear-related analytical techniques for research and monitoring studies on air pollution, ii) to identify major sources of air pollution affecting each of the participating countries with particular reference to toxic heavy metals, and iii) to obtain comparative data on pollution levels in areas of high pollution (e.g. a city centre or a populated area downwind of a large pollution source) and low pollution (e.g. rural area). This document reports the discussions held during the second Research Co-ordination Meeting (RCM) for the CRP which took place at ANSTO in Menai, Australia. (author)

  1. Secondary metabolites isolation in natural products chemistry: comparison of two semipreparative chromatographic techniques (high pressure liquid chromatography and high performance thin-layer chromatography).

    Science.gov (United States)

    Do, Thi Kieu Tiên; Hadji-Minaglou, Francis; Antoniotti, Sylvain; Fernandez, Xavier

    2014-01-17

    Chemical investigations on secondary metabolites in natural products chemistry require efficient isolation techniques for characterization purpose as well as for the evaluation of their biological properties. In the case of phytochemical studies, the performance of the techniques is critical (resolution and yield) since the products generally present a narrow range of polarity and physicochemical properties. Several techniques are currently available, but HPLC (preparative and semipreparative) is the most widely used. To compare the performance of semipreparative HPLC and HPTLC for the isolation of secondary metabolites in different types of extracts, we have chosen carvone from spearmint essential oil (Mentha spicata L.), resveratrol from Fallopia multiflora (Thunb.) Haraldson, and rosmarinic acid from rosemary (Rosmarinus officinalis L.) extracts. The comparison was based on the chromatographic separation, the purity and quantity of isolated compounds, the solvent consumption, the duration and the cost of the isolation operations. The results showed that semipreparative HPTLC can in some case offer some advantages over conventional semipreparative HPLC. PMID:24377738

  2. Green chemistry: A tool in Pharmaceutical Chemistry

    OpenAIRE

    Smita Talaviya; Falguni Majumdar

    2012-01-01

    Green chemistry expresses an area of research developing from scientific discoveries about pollution awareness and it utilizes a set of principles that reduces or eliminates the use or generation of hazardous substances in all steps of particular synthesis or process. Chemists and medicinal scientists can greatly reduce the risk to human health and the environment by following all the valuable principles of green chemistry. The most simple and direct way to apply green chemistry in pharmaceut...

  3. Techniques for detecting effects of urban and rural land-use practices on stream-water chemistry in selected watersheds in Texas, Minnesota,and Illinois

    Science.gov (United States)

    Walker, J.F.

    1993-01-01

    Although considerable effort has been expended during the past two decades to control nonpoint-source contamination of streams and lakes in urban and rural watersheds, little has been published on the effectiveness of various management practices at the watershed scale. This report presents a discussion of several parametric and nonparametric statistical techniques for detecting changes in water-chemistry data. The need for reducing the influence of natural variability was recognized and accomplished through the use of regression equations. Traditional analyses have focused on fixed-frequency instantaneous concentration data; this report describes the use of storm load data as an alternative.

  4. Changes in elongation of falx cerebri during craniosacral therapy techniques applied on the skull of an embalmed cadaver.

    Science.gov (United States)

    Kostopoulos, D C; Keramidas, G

    1992-01-01

    Craniosacral therapy supports that light forces applied to the skull may be transmitted to the dura membrane having a therapeutic effect to the cranial system. This study examines the changes in elongation of falx cerebri during the application of some of the craniosacral therapy techniques to the skull of an embalmed cadaver. The study demonstrates that the relative elongation of the falx cerebri changes as follows: for the frontal lift, 1.44 mm; for the parietal lift, 1.08 mm; for the sphenobasilar compression, -0.33 mm; for the sphenobasilar decompression, 0.28 mm; and for the ear pull, inconclusive results. The present study offers validation for the scientific basis of craniosacral therapy and the contention for cranial suture mobility. PMID:1302656

  5. Analysis of Arbitrary Reflector Antennas Applying the Geometrical Theory of Diffraction Together with the Master Points Technique

    Directory of Open Access Journals (Sweden)

    María Jesús Algar

    2013-01-01

    Full Text Available An efficient approach for the analysis of surface conformed reflector antennas fed arbitrarily is presented. The near field in a large number of sampling points in the aperture of the reflector is obtained applying the Geometrical Theory of Diffraction (GTD. A new technique named Master Points has been developed to reduce the complexity of the ray-tracing computations. The combination of both GTD and Master Points reduces the time requirements of this kind of analysis. To validate the new approach, several reflectors and the effects on the radiation pattern caused by shifting the feed and introducing different obstacles have been considered concerning both simple and complex geometries. The results of these analyses have been compared with the Method of Moments (MoM results.

  6. A Methods and procedures to apply probabilistic safety Assessment (PSA) techniques to the cobalt-therapy process. Cuban experience

    International Nuclear Information System (INIS)

    This paper presents the results of the Probabilistic Safety Analysis (PSA) to the Cobalt Therapy Process, which was performed as part of the International Atomic Energy Agency's Coordinated Research Project (CRP) to Investigate Appropriate Methods and Procedures to Apply Probabilistic Safety Assessment (PSA) Techniques to Large Radiation Sources. The primary methodological tools used in the analysis were Failure Modes and Effects Analysis (FMEA), Event Trees and Fault Trees. These tools were used to evaluate occupational, public and medical exposures during cobalt therapy treatment. The emphasis of the study was on the radiological protection of patients. During the course of the PSA, several findings were analysed concerning the cobalt treatment process. In relation with the Undesired Events Probabilities, the lowest exposures probabilities correspond to the public exposures during the treatment process (Z21); around 10-10 per year, being the workers exposures (Z11); around 10-4 per year. Regarding to the patient, the Z33 probabilities prevail (not desired dose to normal tissue) and Z34 (not irradiated portion to target volume). Patient accidental exposures are also classified in terms of the extent to which the error is likely to affect individual treatments, individual patients, or all the patients treated on a specific unit. Sensitivity analyses were realised to determine the influence of certain tasks or critical stages on the results. As a conclusion the study establishes that the PSA techniques may effectively and reasonably determine the risk associated to the cobalt-therapy treatment process, though there are some weaknesses in its methodological application for this kind of study requiring further research. These weaknesses are due to the fact that the traditional PSA has been mainly applied to complex hardware systems designed to operate with a high automation level, whilst the cobalt therapy treatment is a relatively simple hardware system with a

  7. X-ray fluorescence in Member States (Spain): Main activities related to the use of XRF techniques at the Analytical and Environmental Chemistry Research Group of the University of Girona (UdG)

    International Nuclear Information System (INIS)

    The Analytical and Environmental Chemistry Group (QAA) is a consolidated research group of the Department of Chemistry of the University of Girona (North- East Spain). The main research topics of the group are related to the development and application of analytical methodologies for the determination of inorganic and organic species in different kind of environmental, clinical and industrial samples. From the beginning of the 2000’s, one of the research focuses of the group, is the use of X-ray fluorescence spectrometry (XRF) for the determination of trace amounts of metals and metalloids mostly in samples related to the environmental and industrial fields. For instance, in collaboration with the Institute of Earth Sciences “Jaume Almera” (ICTJA-CSIC, Spain), we have developed and successfully applied several analytical approaches based on the use of EDXRF (Energy dispersive XRF), WDXRF (Wavelength dispersive XRF) and PEDXRF (Polarised EDXRF) for the determination of metals at trace levels in complex liquid samples such as sea water or electroplating waters in vegetation samples collected around mining environments or in active pharmaceutical ingredients. At present, the evaluation of the analytical possibilities of TXRF (Total reflection XRF) in the chemical analysis field is also one of the research topics of QAA. In this sense, several contributions related to the use of this technique for element determination in liquid and solid samples have been developed. A summary of these contributions is summarized in the last section of this review

  8. Organometallic chemistry

    OpenAIRE

    Bashkin, James K.; M.L.H. Green; Dr. M. L. H. Green

    1982-01-01

    Transition metal organometallic chemistry is a rapidly expanding field, which has an important relationship to industrial problems of petrochemical catalysis. This thesis describes studies of fundamental organometallic reaction processes, such as C-H and C-C bond formation and cleavage, and investigations of the structure and bonding of organometallic compounds. A number of techniques were used to pursue these studies, including synthesis, X-ray crystallography, and semi-em...

  9. Imaging techniques applied to quality control of civil manufactured goods obtained starting from ready-to-use mixtures

    Science.gov (United States)

    Bonifazi, Giuseppe; Castaldi, Federica

    2003-05-01

    Concrete materials obtained from the utilization of pre-mixed and ready to use products (central mix-concrete) are more and more used. They represent a big portion of the civil construction market. Such products are used at different scale, ranging from small scale works, as those commonly realized inside and house, an apartment, etc. or at big civil or industrial scale works. In both cases the problem to control the mixtures and the final work is usually realized through the analysis of properly collected samples. Through appropriate sampling it can be derived objective parameters, as size class distribution and composition of the constituting particulate matter, or mechanical characteristics of the sample itself. An important parameter not considered by the previous mentioned approach is "segregation", that is the possibility that some particulate materials migrate preferentially in some zones of the mixtures and/or of the final product. Such a behavior dramatically influences the quality of the product and of the final manufactured good. Actually this behavior is only studied adopting a human based visual approach. Not repeatable analytical procedures or quantitative data processing exist. In this paper a procedure fully based on image processing techniques is described and applied. Results are presented and analyzed with reference to industrial products. A comparison is also made between the new proposed digital imaging based techniques and the analyses usually carried out at industrial laboratory scale for standard quality control.

  10. Conceptual design study and evaluation of an advanced treatment process applying a submerged combustion technique for spent solvents

    International Nuclear Information System (INIS)

    An advanced treatment process based on a submerged combustion technique was proposed for spent solvents and the distillation residues containing transuranium (TRU) nuclides. A conceptual design study and the preliminary cost estimation of the treatment facility applying the process were conducted. Based on the results of the study, the process evaluation on the technical features, such as safety, volume reduction of TRU waste and economics was carried out. The key requirements for practical use were also summarized. It was shown that the process had the features as follows: the simplified treatment and solidification steps will not generate secondary aqueous wastes, the volume of TRU solid waste will be reduced less than one tenth of that of a reference technique (pyrolysis process), and the facility construction cost is less than 1 % of the total construction cost of a future large scale reprocessing plant. As for the low level wastes of calcium phosphate, it was shown that the further removal of β · γ nuclides with TRU nuclides from the wastes would be required for the safety in interim storage and transportation and for the load of shielding. (author)

  11. Applying value stream mapping techniques to eliminate non-value-added waste for the procurement of endovascular stents

    International Nuclear Information System (INIS)

    Objectives: To eliminate non-value-adding (NVA) waste for the procurement of endovascular stents in interventional radiology services by applying value stream mapping (VSM). Materials and methods: The Lean manufacturing technique was used to analyze the process of material and information flow currently required to direct endovascular stents from external suppliers to patients. Based on a decision point analysis for the procurement of stents in the hospital, a present state VSM was drawn. After assessment of the current status VSM and progressive elimination of unnecessary NVA waste, a future state VSM was drawn. Results: The current state VSM demonstrated that out of 13 processes for the procurement of stents only 2 processes were value-adding. Out of the NVA processes 5 processes were unnecessary NVA activities, which could be eliminated. The decision point analysis demonstrated that the procurement of stents was mainly a forecast driven push system. The future state VSM applies a pull inventory control system to trigger the movement of a unit after withdrawal by using a consignment stock. Conclusion: VSM is a visualization tool for the supply chain and value stream, based on the Toyota Production System and greatly assists in successfully implementing a Lean system.

  12. Química organometálica de superfície aplicada à preparação de catalisadores heterogêneos bem definidos Surface organometallic chemistry applied to the preparation of well defined heterogeneous catalysts

    Directory of Open Access Journals (Sweden)

    Silvana I. Wolke

    2002-11-01

    Full Text Available The study of the reactions of organometallic complexes with the surfaces of inorganic oxides, zeolites and metals constitutes the basis of Surface Organometallic Chemistry (SOMC. The basic rules of organometallic chemistry are often valid when applied to surfaces and well-defined surface organometallic complexes can be obtained. These complexes can be used as heterogeneous catalysts or, by controlled reactions, can be transformed in other species useful for a given catalytic reaction. In some cases, these catalysts exhibit higher activity and/or selectivity than their analogous molecular complexes.

  13. Applying clinically proven human techniques for contraception and fertility to endangered species and zoo animals: a review.

    Science.gov (United States)

    Silber, Sherman J; Barbey, Natalie; Lenahan, Kathy; Silber, David Z

    2013-12-01

    Reversible contraception that does not alter natural behavior is a critical need for managing zoo populations. In addition to reversible contraception, other fertility techniques perfected in humans may be useful, such as in vitro fertilization (IVF) or oocyte and embryo banking for endangered species like amphibians and Mexican wolves (Canis lupus baileyi). Furthermore, the genetics of human fertility can give a better understanding of fertility in more exotic species. Collaborations were established to apply human fertility techniques to the captive population. Reversible vasectomy might be one solution for reversible contraception that does not alter behavior. Reversible approaches to vasectomy, avoiding secondary epididymal disruption, were attempted in South American bush dogs (Speothos venaticus), chimpanzees (Pan troglodytes), gorillas (Gorilla gorilla), Przewalski's horse (Equus przewalski poliakov), and Sika deer (Cervus nippon) in a variety of zoos around the world. These techniques were first perfected in > 4,000 humans before attempting them in zoo animals. In vitro fertilization with gestational surrogacy was used to attempt to break the vicious cycle of hand rearing of purebred orangutans, and egg and ovary vitrification in humans have led to successful gamete banking for Mexican wolves and disappearing amphibians. The study of the human Y chromosome has even explained a mechanism of extinction related to global climate change. The best results with vasectomy reversal (normal sperm counts, pregnancy, and live offspring) were obtained when the original vasectomy was performed "open-ended," so as to avoid pressure-induced epididymal disruption. The attempt at gestational surrogacy for orangutans failed because of severe male infertility and the lack of success with human ovarian hyperstimulation protocols. Vitrification of oocytes is already being employed for the Amphibian Ark Project and for Mexican wolves. Vasectomy can be a reversible contraception

  14. Functional reasoning, explanation and analysis: Part 1: a survey on theories, techniques and applied systems. Part 2: qualitative function formation technique

    International Nuclear Information System (INIS)

    Functional Reasoning (FR) enables people to derive the purpose of objects and explain their functions, JAERI's 'Human Acts Simulation Program (HASP)', started from 1987, has the goal of developing programs of the underlying technologies for intelligent robots by imitating the intelligent behavior of humans. FR is considered a useful reasoning method in HASP and applied to understand function of tools and objects in the Toolbox Project. In this report, first, the results of the diverse FR researches within a variety of disciplines are reviewed and the common core and basic problems are identified. Then the qualitative function formation (QFF) technique is introduced. Some novel points are: extending the common qualitative models to include interactions and timing of events by defining temporal and dependency constraints, and binding it with the conventional qualitative simulation. Function concepts are defined as interpretations of either a persistence or an order in the sequence of states, using the trace of the qualitative state vector derived by qualitative simulation on the extended qualitative model. This offers solution to some of the FR problems and leads to a method for generalization and comparison of functions of different objects. (author) 85 refs

  15. A solid phase extraction based non-disruptive sampling technique to investigate the surface chemistry of macroalgae.

    Science.gov (United States)

    Cirri, Emilio; Grosser, Katharina; Pohnert, Georg

    2016-01-01

    The surface chemistry of aquatic organisms determines their biotic interactions. Metabolites in the spatially limited laminar boundary layer mediate processes, such as antifouling, allelopathy and chemical defense against herbivores. However, very few methods are available for the investigation of such surface metabolites. An approach is described in which surfaces are extracted by means of C18 solid phase material. By powdering wet algal surfaces with this material, organic compounds are adsorbed and can be easily recovered for subsequent liquid chromatography/mass spectrometry (LC/MS) and gas chromatography/mass spectrometry (GC/MS) investigations. The method is robust, picks up metabolites of a broad polarity range and is easy to handle. It is more universal compared to established solvent dipping protocols and it does not cause damage to the test organisms. A protocol is introduced for the macroalgae Fucus vesiculosus, Caulerpa taxifolia and Gracilaria vermiculophylla, but it can be easily transferred to other aquatic organisms. PMID:26795737

  16. Advances in high temperature chemistry

    CERN Document Server

    Eyring, Leroy

    1969-01-01

    Advances in High Temperature Chemistry, Volume 2 covers the advances in the knowledge of the high temperature behavior of materials and the complex and unfamiliar characteristics of matter at high temperature. The book discusses the dissociation energies and free energy functions of gaseous monoxides; the matrix-isolation technique applied to high temperature molecules; and the main features, the techniques for the production, detection, and diagnosis, and the applications of molecular beams in high temperatures. The text also describes the chemical research in streaming thermal plasmas, as w

  17. Estimation of water quality parameters applying satellite data fusion and mining techniques in the lake Albufera de Valencia (Spain)

    Science.gov (United States)

    Doña, Carolina; Chang, Ni-Bin; Vannah, Benjamin W.; Sánchez, Juan Manuel; Delegido, Jesús; Camacho, Antonio; Caselles, Vicente

    2014-05-01

    Linked to the enforcement of the European Water Framework Directive (2000) (WFD), which establishes that all countries of the European Union have to avoid deterioration, improve and retrieve the status of the water bodies, and maintain their good ecological status, several remote sensing studies have been carried out to monitor and understand the water quality variables trend. Lake Albufera de Valencia (Spain) is a hypereutrophic system that can present chrorophyll a concentrations over 200 mg·m-3 and transparency (Secchi disk) values below 20 cm, needing to retrieve and improve its water quality. The principal aim of our work was to develop algorithms to estimate water quality parameters such as chlorophyll a concentration and water transparency, which are informative of the eutrophication and ecological status, using remote sensing data. Remote sensing data from Terra/MODIS, Landsat 5-TM and Landsat 7-ETM+ images were used to carry out this study. Landsat images are useful to analyze the spatial variability of the water quality variables, as well as to monitor small to medium size water bodies due to its 30-m spatial resolution. But, the poor temporal resolution of Landsat, with a 16-day revisit time, is an issue. In this work we tried to solve this data gap by applying fusion techniques between Landsat and MODIS images. Although the lower spatial resolution of MODIS is 250/500-m, one image per day is available. Thus, synthetic Landsat images were created using data fusion for no data acquisition dates. Good correlation values were obtained when comparing original and synthetic Landsat images. Genetic programming was used to develop models for predicting water quality. Using the reflectance bands of the synthetic Landsat images as inputs to the model, values of R2 = 0.94 and RMSE = 8 mg·m-3 were obtained when comparing modeled and observed values of chlorophyll a, and values of R2= 0.91 and RMSE = 4 cm for the transparency (Secchi disk). Finally, concentration

  18. Feasibility to apply the steam assisted gravity drainage (SAGD) technique in the country's heavy crude-oil fields

    International Nuclear Information System (INIS)

    The steam assisted gravity drainage (SAGD) processes are one of the most efficient and profitable technologies for the production of heavy crude oils and oil sands. These processes involve the drilling of a couple of parallel horizontal wells, separated by a vertical distance and located near the oil field base. The upper well is used to continuously inject steam into the zone of interest, while the lower well collects all resulting fluids (oil, condensate and formation water) and takes them to the surface (Butler, 1994). This technology has been successfully implemented in countries such as Canada, Venezuela and United States, reaching recovery factors in excess of 50%. This article provides an overview of the technique's operation mechanism and the process most relevant characteristics, as well as the various categories this technology is divided into, including all its advantages and limitations. Furthermore, the article sets the oil field's minimal conditions under which the SAGD process is efficient, which conditions, as integrated to a series of mathematical models, allow to make forecasts on production, thermal efficiency (ODR) and oil to be recovered, as long as it is feasible (from a technical point of view) to apply this technique to a defined oil field. The information and concepts compiled during this research prompted the development of software, which may be used as an information, analysis and interpretation tool to predict and quantify this technology's performance. Based on the article, preliminary studies were started for the country's heavy crude-oil fields, identifying which provide the minimum conditions for the successful development of a pilot project

  19. Fate of nitrogen in soil-crop system by nuclear techniques. Effects of applied rate of ammonium bicarbonate

    International Nuclear Information System (INIS)

    The experiment was conducted with 15N tracing techniques in Shijiazhuang from 1994 to 1995. Three nitrogen rates, including optimum rate (150 kg/hm2) based on the recommendation of local farmers, above 50% of optimum rate (225 kg/hm2) and below 50% of optimum rate (75 kg/hm2), were selected to study the effect of application rates of ammonium bicarbonate on yield of winter wheat and fate of applied nitrogen under local management and irrigated condition. The results showed that nitrogen uptake and grain yield of wheat under fertilized treatments were higher than those in unfertilized treatment (except 225 kg/hm2 treatment). The highest yield and top dry mater weight (grain 6.80 t/hm2, top 14.70 t/hm2) were obtained in optimum N applied treatment (150 kg/hm2), while the highest nitrogen recovery efficiency (38.5%) of ammonium bicarbonate by winter wheat was found in below 50% of optimum rate treatment (75 kg/hm2) due to the relatively high basic fertility of the field. However, nitrogen recovery efficiency of ammonium bicarbonate decreased with the increasing N application rate. The highest residue of fertilizer N was found in 225 kg/hm2 treatment, and 46% of the residue existed in the top layer of the soil (0∼50 cm). The unaccounted N from fertilizer were 30.20%, 36.56%, 31.25% in 75 kg/hm2, 150 kg/hm2, 225 kg/hm2 treatments respectively according to 15N balance calculation in soil-plant system. The effect of residue N in soil on the next crop, maize, in 225 kg/hm2 treatment was best in three fertilized treatments, suggesting the possibilities of nitrate leaching down in 225 kg/hm2 treatment. (15 tabs.)

  20. Organic chemistry on solid surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Zhen; Zaera, Francisco [Department of Chemistry, University of California, Riverside, CA 92521 (United States)

    2006-07-15

    Chemistry on solid surfaces is central to many areas of practical interest such as heterogeneous catalysis, tribology, electrochemistry, and materials processing. With the development of many surface-sensitive analytical techniques in the past decades, great advances have been possible in our understanding of such surface chemistry at the molecular level. Earlier studies with model systems, single crystals in particular, have provided rich information about the adsorption and reaction kinetics of simple inorganic molecules. More recently, the same approach has been expanded to the study of the surface chemistry of relatively complex organic molecules, in large measure in connection with the selective synthesis of fine chemicals and pharmaceuticals. In this report, the chemical reactions of organic molecules and fragments on solid surfaces, mainly on single crystals of metals but also on crystals of metal oxides, carbides, nitrides, phosphides, sulfides and semiconductors as well as on more complex models such as bimetallics, alloys, and supported particles, are reviewed. A scheme borrowed from the organometallic and organic chemistry literature is followed in which key examples of representative reactions are cited first, and general reactivity trends in terms of both the reactants and the nature of the surface are then identified to highlight important mechanistic details. An attempt has been made to emphasize recent advances, but key earlier examples are cited as needed. Finally, correlations between surface and organometallic and organic chemistry, the relevance of surface reactions to applied catalysis and materials functionalization, and some promising future directions in this area are briefly discussed. (author)

  1. Mathematical problems for chemistry students

    CERN Document Server

    Pota, Gyorgy

    2006-01-01

    Mathematical Problems for Chemistry Students has been compiled and written (a) to help chemistry students in their mathematical studies by providing them with mathematical problems really occurring in chemistry (b) to help practising chemists to activate their applied mathematical skills and (c) to introduce students and specialists of the chemistry-related fields (physicists, mathematicians, biologists, etc.) into the world of the chemical applications. Some problems of the collection are mathematical reformulations of those in the standard textbooks of chemistry, other

  2. Test-retest reliability of a new technique with pressure algometry applied to teeth in healthy Chinese individuals.

    Science.gov (United States)

    Liu, Ran; Gu, Xinyu; Zhang, Jinglu; Yu, Linfeng; Chen, Wenjing; Wang, Kelun; Svensson, Peter

    2016-06-01

    Pressure pain thresholds (PPTs) have been shown to be useful measures of mechanical pain sensitivity in deep tissues. However, clinical methods for measuring mechanical allodynia or hyperalgesia in teeth have not been reported. The aim of this study was to assess the reliability of PPTs in periodontal ligament of healthy Chinese participants. Twenty healthy young adults participated. Pressure pain thresholds were measured at six teeth and in two directions. The tests included three consecutive trials, in two separate sessions, which were performed on the first day by one examiner. After 1-3 wk, an identical protocol was carried out by two examiners, also in two separate sessions. There were no significant differences between repeated measures for all teeth. The PPTs had excellent reliability with high intraclass coefficients (ICCs) across different sessions (ICC: 0.871-0.956), days (ICC: 0.879-0.951), and examiners (ICC: 0.845-0.950). Pressure pain thresholds applied to the teeth have excellent intra- and inter-examiner agreement in healthy participants. This method may be proposed as an easy and reliable technique to assess mechanical pain sensitivity (e.g. mechanical allodynia and hyperalgesia) in the periodontal ligament, which is associated with endodontic or periodontal conditions. PMID:27017942

  3. UQ and V&V techniques applied to experiments and simulations of heated pipes pressurized to failure.

    Energy Technology Data Exchange (ETDEWEB)

    Romero, Vicente Jose; Dempsey, J. Franklin; Antoun, Bonnie R.

    2014-05-01

    This report demonstrates versatile and practical model validation and uncertainty quantification techniques applied to the accuracy assessment of a computational model of heated steel pipes pressurized to failure. The Real Space validation methodology segregates aleatory and epistemic uncertainties to form straightforward model validation metrics especially suited for assessing models to be used in the analysis of performance and safety margins. The methodology handles difficulties associated with representing and propagating interval and/or probabilistic uncertainties from multiple correlated and uncorrelated sources in the experiments and simulations including: material variability characterized by non-parametric random functions (discrete temperature dependent stress-strain curves); very limited (sparse) experimental data at the coupon testing level for material characterization and at the pipe-test validation level; boundary condition reconstruction uncertainties from spatially sparse sensor data; normalization of pipe experimental responses for measured input-condition differences among tests and for random and systematic uncertainties in measurement/processing/inference of experimental inputs and outputs; numerical solution uncertainty from model discretization and solver effects.

  4. B2C电子商务中的信息抽取技术%Information Extraction Techniques Applied to B2C E-Commerce

    Institute of Scientific and Technical Information of China (English)

    于琨; 蔡智; 糜仲春; 蔡庆生

    2002-01-01

    After stepping out the valley of net economy, B2C e-commerce is about to come into a climax of develop-ment. Information extraction techniques are going to be one of the most important factors to promote B2C e-com-merce. In this paper, we present a review on the recent progress of information extraction techniques applied to B2Ce-commerce. The characteristics of each technique are also appraised.

  5. Teaching Organic Chemistry via Student-Directed Learning: A Technique that Promotes Independence and Responsibility in the Student

    Science.gov (United States)

    Katz, Marlene

    1996-05-01

    One of the frustrations of teaching is the failure of talented students due to lack of effort on their part. We have to admit that Organic chemistry presents many challenges to students. At the same time we are aware that students often defeat themselves by a combination of procrastination and cramming. The Student-Directed Learning (SDL) method discourages this student strategy. Instead SDL fosters increased self-confidence, independence, and an awareness of the student's role in the teaching/learning process. This method incorporates four criteria for acceptance of responsibility: student ownership, student-active learning, student accountability, and student control. With SDL the course content is reorganized to make it more accessible to students. Learning modules are centered around "The Big Ideas". Each big idea is connected to its usefulness in pharmaceutical science, or is identified as a foundation idea for understanding subsequent course material. The class session is changed from traditional lecture to continuous dialogue between teacher and learners. Reading quizzes emphasize the importance of conscientious preparation for class. Structured retesting is offered to increase student self-confidence and learning. The extra effort required by the SDL method is more than compensated for by the improved grades, ACS exam scores, and student attitudes towards the course.

  6. 应用化学专业营销方向教学实践改革初探%Probing the Practical Teaching Reform of Marketing Route of Applied Chemistry Specialty

    Institute of Scientific and Technical Information of China (English)

    方涛; 周志强; 王玉峰; 刘本才; 张秀成

    2011-01-01

    为了培养复合型人才,扩展林业院校应用化学专业学生就业渠道,我们尝试在应用化学专业设立了化工营销方向。文章从设置应用化学营销方向的指导思想、课程设置特点、毕业论文和实习模式等方面对教学实践改革进行了探讨。%In order to training of compound talents and afford job opportunities on a more extensive scale of applied chemistry specialty students of forest high school,we tried to establish chemical engineering marketing of applied chemistry specialty.From both theory and teaching practice,the paper mainly discussed the reforms in following sides: the guiding principles of set up applied chemistry marketing specialty,course features,graduation thesis and internship model.

  7. 中国大学本科应用化学专业发展历程纪要%A Brief Recordation of the Development of the Undergraduate Applied Chemistry Specialty in China

    Institute of Scientific and Technical Information of China (English)

    史济斌; 胡军; 虞大红; 蔡良珍; 张文清

    2011-01-01

    本文简述了我国本科应用化学专业建设历程。以期为专业定位、培养目标与培养规格、教学内容与课程体系的改革与建设,为应用化学专业教育的持续、健康发展,特别是应用化学特色专业建设点的建设,提供了有利于承上启下、继往开来的借鉴。%The establishment and developments of the undergraduate Applied Chemistry specialty are briefly reviewed. The reform and construction of the Applied Chemistry specialty, such as the specialty orientation, the training objective, the training specification, the curricular system and the content of courses are introduced. It provides a reference source for the sustainable development of the Applied Chemistry specialty, especially for the construction of distinguish professional characteristics. It also supports a connect link of the previous achievements and would carry forward into the future plan.

  8. Surface chemistry

    CERN Document Server

    Desai, KR

    2008-01-01

    The surface Chemistry of a material as a whole is crucially dependent upon the Nature and type of surfaces exposed on crystallites. It is therefore vitally important to independently Study different, well - defined surfaces through surface analytical techniques. In addition to composition and structure of surface, the subject also provides information on dynamic light scattering, micro emulsions, colloid Stability control and nanostructures. The present book endeavour to bring before the reader that the understanding and exploitation of Solid state phenomena depended largely on the ability to

  9. Green chemistry: A tool in Pharmaceutical Chemistry

    Directory of Open Access Journals (Sweden)

    Smita Talaviya

    2012-07-01

    Full Text Available Green chemistry expresses an area of research developing from scientific discoveries about pollution awareness and it utilizes a set of principles that reduces or eliminates the use or generation of hazardous substances in all steps of particular synthesis or process. Chemists and medicinal scientists can greatly reduce the risk to human health and the environment by following all the valuable principles of green chemistry. The most simple and direct way to apply green chemistry in pharmaceuticals is to utilize eco-friendly, non-hazardous, reproducible and efficient solvents and catalysts in synthesis of drug molecules, drug intermediates and in researches involving synthetic chemistry. Microwave synthesis is also an important tool of green chemistry by being an energy efficient process.

  10. Bad chemistry

    OpenAIRE

    Petsko, Gregory A

    2004-01-01

    General chemistry courses haven't changed significantly in forty years. Because most basic chemistry students are premedical students, medical schools have enormous influence and could help us start all over again to create undergraduate chemistry education that works.

  11. Applications of artificial intelligence techniques to organic chemistry. Study on 13C NMR of steroids using computer

    International Nuclear Information System (INIS)

    This work describes the utilization of two groups of programs in searching for characteristic signals of NMR 13C steroidal compounds. The first group of programs used data bases with the spectral data and a methodology that enables the choice and the search of substructures. The chemical shifts and multiplicities for each specific substructure are used as rules to identify different types and subtypes of steroidal compounds. The second one was built to apply the rules formulated by the first group of programs and to foresee any skeletal based on a spectral analysis. (author)

  12. Non-invasive near-field measurement setup based on modulated scatterer technique applied to microwave tomography

    Science.gov (United States)

    Memarzadeh-Tehran, Hamidreza

    The main focus of this thesis is to address the design and development of a near-field (NF) imaging setup based on the modulated scatterer technique (MST). MST is a well-known approach used in applications where accurate and perturbation-free measurement results are necessary. Of the possible implementations available for making an MST probe, including electrical, optical and mechanical, the optically modulated scatterer OMS was considered in order to provide nearly perturbation-free measurement due to the invisibility of optical fiber to the radio-frequency electromagnetic fields. The OMS probe consists of a commercial, off-the-shelf (COTS) photodiode chip (nonlinear device), a short-dipole antenna acting as a scatterer and a matching network (passive circuit). The latter improves the scattering properties and also increases the sensitivity of the OMS probe within the frequency range in which the matching network is optimized. The radiation characteristics of the probe, including cross-polarization response and omnidirectional sensitivity, were both theoretically and experimentally investigated. Finally, the performance and reliability of the probe was studied by comparing measured near-field distributions on a known field distribution with simulations. Increased imaging speed was obtained using an array of OMS probes, which reduces mechanical movements. Mutual-coupling, switching time and shadowing effect, which all may affect the performance of the array, were investigated. Then, the results obtained by the array were validated in a NF imager by measuring the E-field distribution of an antenna under test (AUT) and comparing it with a simulation. Calibration and data averaging were applied to raw data to compensate the probes for uncertainties in fabrication and interaction between array/AUT and array/receiving antenna. Dynamic range and linearity of the developed NF imager was improved by adding a carrier canceller circuit to the front-end of the receiver. The

  13. A review of the Match technique as applied to AASE-2/EASOE and SOLVE/THESEO 2000

    Directory of Open Access Journals (Sweden)

    G. A. Morris

    2005-01-01

    Full Text Available We apply the NASA Goddard Trajectory Model to data from a series of ozonesondes to derive ozone loss rates in the lower stratosphere for the AASE-2/EASOE mission (January-March 1992 and for the SOLVE/THESEO 2000 mission (January-March 2000 in an approach similar to Match. Ozone loss rates are computed by comparing the ozone concentrations provided by ozonesondes launched at the beginning and end of the trajectories connecting the launches. We investigate the sensitivity of the Match results to the various parameters used to reject potential matches in the original Match technique. While these filters effectively eliminate from consideration 80% of the matched sonde pairs and >99% of matched observations in our study, we conclude that only a filter based on potential vorticity changes along the calculated back trajectories seems warranted. Our study also demonstrates that the ozone loss rates estimated in Match can vary by up to a factor of two depending upon the precise trajectory paths calculated for each trajectory. As a result, the statistical uncertainties published with previous Match results might need to be augmented by an additional systematic error. The sensitivity to the trajectory path is particularly pronounced in the month of January, for which the largest ozone loss rate discrepancies between photochemical models and Match are found. For most of the two study periods, our ozone loss rates agree with those previously published. Notable exceptions are found for January 1992 at 475K and late February/early March 2000 at 450K, both periods during which we generally find smaller loss rates than the previous Match studies. Integrated ozone loss rates estimated by Match in both of those years compare well with those found in numerous other studies and in a potential vorticity/potential temperature approach shown previously and in this paper. Finally, we suggest an alternate approach to Match using trajectory mapping. This approach uses

  14. A New Approach for Detection Improvement of the Creutzfeldt-Jakob Disorder through a Specific Surface Chemistry Applied onto Titration Well

    Directory of Open Access Journals (Sweden)

    Dominique Debarnot

    2012-10-01

    Full Text Available This work illustrates the enhancement of the sensitivity of the ELISA titration for recombinant human and native prion proteins, while reducing other non-specific adsorptions that could increase the background signal and lead to a low sensitivity and false positives. It is achieved thanks to the association of plasma chemistry and coating with different amphiphilic molecules bearing either ionic charges and/or long hydrocarbon chains. The treated support by 3-butenylamine hydrochloride improves the signal detection of recombinant protein, while surface modification with the 3,7-dimethylocta-2,6-dien-1-diamine (geranylamine enhances the sensitivity of the native protein. Beside the surface chemistry effect, these different results are associated with protein conformation.

  15. Comparison, limitations and uncertainty of wet chemistry techniques, loss on ignition and dry combustion in soil organic carbon analysis

    Science.gov (United States)

    Ćirić, Vladimir; Manojlović, Maja; Belić, Milivoj; Nešić, Ljiljana; Švarc-Gajić, Jaroslava; Sitaula, Bishal K.

    2014-05-01

    Soil organic carbon (SOC) has an important role in natural processes (carbon cycle, global climate change and plant growth), agriculture, soil protection and biodiversity. Determination of SOC is usually based on the oxidation of soil organic matter (SOM). Many methods are available, each with advantages and disadvantages in terms of accuracy, costs, convenience and repeatability. Therefore, it is necessary to make a comprehensive overview in order to select appropriate method with the purpose of accurate SOC determination. Most errors in SOC stocks assessment and SOC monitoring occur due to differences in analytical approaches and procedures. This can be a key factor in making incorrect conclusions. The purpose of this research was to compare methods for SOC determination and highlight the strengths and weaknesses of individual methods. The research was conducted on soil samples collected from different soil types and different land uses of temperate region. The concentration of SOC in every sample was determined by the following methods: Tyrin's method, Tyrin's method without addition of AgSO4, Kotzmann's method, loss on ignition (LOI) method, Walkley-Black method, dry combustion by CHN analyzer with pretreatment with HCl and subtraction of volumetrically determined soil inorganic carbon (SIC) from dry combustion by CHN analyzer without pretreatment. Each of the applied methods demonstrated specific limitations. The average SOC concentration determined by different methods ranged from 16.1-28.5 g kg-1. It has been established that different methods for the determination of total SOC recovered 76-157% of SOC compared to the reference dry combustion method by CHN analyzer. The correlation coefficients between applied methods ranged from 0.74-0.98. The Tyrin's method without addition of AgSO4 can be recommended as the most suitable method for the determination of SOC, with mandatory use of the correction factor 1.14. For the purpose of reducing the difference

  16. Acceptance and Mindfulness Techniques as Applied to Refugee and Ethnic Minority Populations with PTSD: Examples from "Culturally Adapted CBT"

    Science.gov (United States)

    Hinton, Devon E.; Pich, Vuth; Hofmann, Stefan G.; Otto, Michael W.

    2013-01-01

    In this article we illustrate how we utilize acceptance and mindfulness techniques in our treatment (Culturally Adapted CBT, or CA-CBT) for traumatized refugees and ethnic minority populations. We present a Nodal Network Model (NNM) of Affect to explain the treatment's emphasis on body-centered mindfulness techniques and its focus on psychological…

  17. Assessment of the impact of anthropogenic activities on the groundwater hydrology and chemistry in Tarsus coastal plain (Mersin, SE Turkey) using fuzzy clustering, multivariate statistics and GIS techniques

    Science.gov (United States)

    Güler, Cüneyt; Kurt, Mehmet Ali; Alpaslan, Musa; Akbulut, Can

    2012-01-01

    SummaryTarsus coastal plain (TCP) is an economically and ecologically important area situated in between the fertile fluvio-deltaic plains of two rivers, Deliçay and Tarsus (Mersin, SE Turkey), where anthropogenic activities (agricultural, industrial, and domestic) are very intense. Twenty-four water quality parameters were surveyed at 193 groundwater and 10 surface water sites during August 2008. The objective was to characterize the physico-chemical properties of groundwaters in TCP, assess the impact of anthropogenic activities on the groundwater hydrology and chemistry, and identify the major hydrogeochemical processes occurring in the area. Groundwater samples were grouped into hydrochemically distinct and spatially continuous four water classes (i.e., C1, C2, C3, and C4) using the fuzzy c-means (FCM) clustering method, where membership values were interpolated using the ordinary kriging technique. Principal components analysis (PCA) was used to decipher various underlying natural and anthropogenic processes creating these distinct water classes. Four principal components (PCs) were extracted in PCA which explained more than 73% of the total variance in water quality. Major factors responsible for the variations in chemistries of water classes are identified as: (1) water-rock interaction and nitrate contamination; (2) salinization by seawater intrusion and evaporite dissolution; (3) geogenic/anthropogenic Cr, Fe, and Mn; and (4) anthropogenic Zn pollution. Overexploitation of the aquifer is clearly evident, especially at settlements located near the coastal zone, where the water table is lowered 2-5 m below the sea level. Salinization is well known in the area and is attributed not only to seawater intrusion, but also to dissolution of evaporitic series from the Handere formation. Hydrochemical evidence also suggest that in the area subsurface paleo-river channels and the deposits infilling the ancient lagoon area within Quaternary-Recent alluvial deposits

  18. Development of a superconductor magnetic suspension and balance prototype facility for studying the feasibility of applying this technique to large scale aerodynamic testing

    Science.gov (United States)

    Zapata, R. N.; Humphris, R. R.; Henderson, K. C.

    1975-01-01

    The basic research and development work towards proving the feasibility of operating an all-superconductor magnetic suspension and balance device for aerodynamic testing is presented. The feasibility of applying a quasi-six-degree-of freedom free support technique to dynamic stability research was studied along with the design concepts and parameters for applying magnetic suspension techniques to large-scale aerodynamic facilities. A prototype aerodynamic test facility was implemented. Relevant aspects of the development of the prototype facility are described in three sections: (1) design characteristics; (2) operational characteristics; and (3) scaling to larger facilities.

  19. Uranium exploration data and techniques applied to the preparation of radioelement maps. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    The report reviews the advantage and pitfalls of using uranium exploration data and techniques as well as other methods for the preparation of radioelement and radon maps for baseline information in environmental studies and monitoring

  20. Prediction of Quality Features in Iberian Ham by Applying Data Mining on Data From MRI and Computer Vision Techniques

    OpenAIRE

    Daniel Caballero; Andrés Caro; Trinidad Perez-Palacios; Pablo G. Rodriguez; Ramón Palacios

    2014-01-01

    This paper aims to predict quality features of Iberian hams by using non-destructive methods of analys is and data mining. Iberian hams were analyzed by Magn etic Resonance Imaging (MRI) and Computer Vision Techniques (CVT) throughout their ripening process and physico-chemical parameters from them were also measured. The obtained data were used to create an initial database. Deductive techniques ofdata mining (multiple linear reg...

  1. Physics and Chemistry of Interfaces

    CERN Document Server

    Butt, Hans-Jurgen; Kappl, Michael

    2003-01-01

    Serving as a general introduction to surface and interface science, this book focuses on essential concepts rather than specific details, on intuitive understanding rather than learning facts. The text reflects the fact that the physics and chemistry of surfaces is a diverse field of research and shows this in its Interdisciplinary conceptual design. Once the most important techniques and methods have been introduced, readers will be able to apply simple models to their own scientific problems. Furthermore, manifold high-end technological applications from surface technology, biotechnology, or

  2. Conference 'Chemistry of hydrides' Proceedings

    International Nuclear Information System (INIS)

    This collection of thesis of conference of Chemistry hydrides presents the results of investigations concerning of base questions of chemistry of nonorganic hydrides, including synthesis questions, studying of physical and chemical properties, thermodynamics, analytical chemistry, investigation of structure, equilibriums in the systems of metal-hydrogen, behaviour of nonorganic hydrides in non-water mediums and applying investigations in the chemistry area and technology of nonorganic hydrides

  3. Mathematical problems for chemistry students

    CERN Document Server

    Pota, Gyorgy

    2011-01-01

    Mathematical Problems for Chemistry Students has been compiled and written (a) to help chemistrystudents in their mathematical studies by providing them with mathematical problems really occurring in chemistry (b) to help practising chemists to activate their applied mathematical skills and (c) to introduce students and specialistsof the chemistry-related fields (physicists, mathematicians, biologists, etc.) intothe world of the chemical applications.Some problems of the collection are mathematical reformulations of those in the standard textbooks of chemistry, others we

  4. Mathematical Chemistry

    OpenAIRE

    Trinajstić, Nenad; Gutman, Ivan

    2002-01-01

    A brief description is given of the historical development of mathematics and chemistry. A path leading to the meeting of these two sciences is described. An attempt is made to define mathematical chemistry, and journals containing the term mathematical chemistry in their titles are noted. In conclusion, the statement is made that although chemistry is an experimental science aimed at preparing new compounds and materials, mathematics is very useful in chemistry, among other things, to produc...

  5. Applying the digital-image-correlation technique to measure the deformation of an old building’s column retrofitted with steel plate in an in situ pushover test

    Indian Academy of Sciences (India)

    Shih-Heng Tung; Ming-Hsiang Shih; Wen-Pei Sung

    2014-06-01

    An in situ pushover test is carried out on an old building of Guan-Miao elementary school in south Taiwan. Columns of this building are seismically retrofitted with steel plate. The DIC (digital-image-correlation) technique is used to measure the deformation of the retrofitted column. The result shows that the DIC technique can be successfully applied to measure the relative displacement of the column. Additionally, thismethod leads to the measurement of relative displacements formany points on the column simultaneously. Hence, the column deformation curve, rotation and curvature can be determined using interpolation method. The resulting curvaturediagram reveals that the phenomenon of plastic hinge occurs at about 2% storey drift ratio, and that the DIC technique can be applied to measure column deformation in a full scale in situ test.

  6. A Survey on Optimal Signal Processing Techniques Applied to Improve the Performance of Mechanical Sensors in Automotive Applications

    OpenAIRE

    Wilmar Hernandez

    2007-01-01

    In this paper a survey on recent applications of optimal signal processing techniques to improve the performance of mechanical sensors is made. Here, a comparison between classical filters and optimal filters for automotive sensors is made, and the current state of the art of the application of robust and optimal control and signal processing techniques to the design of the intelligent (or smart) sensors that today’s cars need is presented through several experimental results that show t...

  7. A practical approach for linearity assessment of calibration curves under the International Union of Pure and Applied Chemistry (IUPAC) guidelines for an in-house validation of method of analysis.

    Science.gov (United States)

    Sanagi, M Marsin; Nasir, Zalilah; Ling, Susie Lu; Hermawan, Dadan; Ibrahim, Wan Aini Wan; Naim, Ahmedy Abu

    2010-01-01

    Linearity assessment as required in method validation has always been subject to different interpretations and definitions by various guidelines and protocols. However, there are very limited applicable implementation procedures that can be followed by a laboratory chemist in assessing linearity. Thus, this work proposes a simple method for linearity assessment in method validation by a regression analysis that covers experimental design, estimation of the parameters, outlier treatment, and evaluation of the assumptions according to the International Union of Pure and Applied Chemistry guidelines. The suitability of this procedure was demonstrated by its application to an in-house validation for the determination of plasticizers in plastic food packaging by GC. PMID:20922968

  8. A Survey on Optimal Signal Processing Techniques Applied to Improve the Performance of Mechanical Sensors in Automotive Applications

    Directory of Open Access Journals (Sweden)

    Wilmar Hernandez

    2007-01-01

    Full Text Available In this paper a survey on recent applications of optimal signal processing techniques to improve the performance of mechanical sensors is made. Here, a comparison between classical filters and optimal filters for automotive sensors is made, and the current state of the art of the application of robust and optimal control and signal processing techniques to the design of the intelligent (or smart sensors that today’s cars need is presented through several experimental results that show that the fusion of intelligent sensors and optimal signal processing techniques is the clear way to go. However, the switch between the traditional methods of designing automotive sensors and the new ones cannot be done overnight because there are some open research issues that have to be solved. This paper draws attention to one of the open research issues and tries to arouse researcher’s interest in the fusion of intelligent sensors and optimal signal processing techniques.

  9. Are U. S. Colleges and Universities Applying Marketing Techniques Properly and within the Context of an Overall Marketing Plan?

    Science.gov (United States)

    Goldgehn, Leslie A.

    1990-01-01

    A survey of 791 college admissions officers investigated the use and perceived effectiveness of 15 marketing techniques: publicity; target marketing; market segmentation; advertising; program development; market positioning; market research; access; marketing plan; pricing; marketing committee; advertising research; consultants; marketing audit;…

  10. X-diffraction technique applied for nano system metrology; Tecnica de difracao de raios X aplicada na metrologia de nanossistemas

    Energy Technology Data Exchange (ETDEWEB)

    Kuznetsov, Alexei Yu.; Machado, Rogerio; Robertis, Eveline de; Campos, Andrea P.C.; Archanjo, Braulio S.; Gomes, Lincoln S.; Achete, Carlos A., E-mail: okuznetsov@inmetro.gov.b [Instituto Nacional de Metrologia, Normalizacao e Qualidade Industrial (DIMAT/INMETRO), Duque de Caxias, RJ (Brazil). Div. de Metrologia de Materiais

    2009-07-01

    The application of nano materials are fast growing in all industrial sectors, with a strong necessity in nano metrology and normalizing in the nano material area. The great potential of the X-ray diffraction technique in this field is illustrated at the example of metals, metal oxides and pharmaceuticals

  11. Digital filtering techniques applied to electric power systems protection; Tecnicas de filtragem digital aplicadas a protecao de sistemas eletricos de potencia

    Energy Technology Data Exchange (ETDEWEB)

    Brito, Helio Glauco Ferreira

    1996-12-31

    This work introduces an analysis and a comparative study of some of the techniques for digital filtering of the voltage and current waveforms from faulted transmission lines. This study is of fundamental importance for the development of algorithms applied to digital protection of electric power systems. The techniques studied are based on the Discrete Fourier Transform theory, the Walsh functions and the Kalman filter theory. Two aspects were emphasized in this study: Firstly, the non-recursive techniques were analysed with the implementation of filters based on Fourier theory and the Walsh functions. Secondly, recursive techniques were analyzed, with the implementation of the filters based on the Kalman theory and once more on the Fourier theory. (author) 56 refs., 25 figs., 16 tabs.

  12. A spatial model with pulsed releases to compare strategies for the sterile insect technique applied to the mosquito Aedes aegypti

    OpenAIRE

    Evans, T. P. O.; Bishop, S.R.

    2014-01-01

    We present a simple mathematical model to replicate the key features of the sterile insect technique (SIT) for controlling pest species, with particular reference to the mosquito Aedes aegypti, the main vector of dengue fever. The model differs from the majority of those studied previously in that it is simultaneously spatially explicit and involves pulsed, rather than continuous, sterile insect releases. The spatially uniform equilibria of the model are identified and analysed. Simulations a...

  13. Applying Model-Based Techniques for Aerospace Projects in Accordance with DO-178C, DO-331, and DO-333

    OpenAIRE

    Eisemann, Ulrich

    2016-01-01

    The new standard for software development in civil aviation, DO-178C, mainly differs from its predecessor DO-178B, in that it has standard supplements to provide greater scope for using new software development methods. The most important standard supplements are DO-331 on the methods of model-based development and model-based verification and DO-333 on the use of formal methods such as model checking and abstract interpretation. These key software design techniques offer enormous potential f...

  14. wavelet de-noising technique applied to the PLL of a GPS receiver embedded in an observation satellite

    Directory of Open Access Journals (Sweden)

    Dib Djamel Eddine

    2012-02-01

    Full Text Available In this paper, we study the Doppler effect on a GPS(Global Positioning System on board of an observation satellite that receives information on a carrier wave L1 frequency 1575.42 MHz .We simulated GPS signal acquisition. This allowed us to see the behavior of this type of receiver in AWGN channel (AWGN and we define a method to reduce the Doppler Effect in the tracking loop which is wavelet de-noising technique.

  15. Anticipated uncertainty budgets of PRARETIME and T2L2 techniques as applied to ExTRAS

    Science.gov (United States)

    Thomas, Claudine; Wolf, Peter; Uhrich, Pierre J. M.; Schaefer, W.; Nau, H.; Veillet, Christian

    1995-05-01

    The Experiment on Timing Ranging and Atmospheric Soundings, ExTRAS, was conceived jointly by the European Space Agency, ESA, and the Russian Space Agency, RSA. It is also designated the 'Hydrogen-maser in Space/Meteor-3M project'. The launch of the satellite is scheduled for early 1997. The package, to be flown on board a Russian meteorological satellite includes ultra-stable frequency and time sources, namely two active and auto-tuned hydrogen masers. Communication between the on-board hydrogen masers and the ground station clocks is effected by means of a microwave link using the modified version for time transfer of the Precise Range And Range-rate Equipment, PRARETIME, technique, and an optical link which uses the Time Transfer by Laser Link, T2L2, method. Both the PRARETIME and T2L2 techniques operate in a two-directional mode, which makes it possible to carry out accurate transmissions without precise knowledge of the satellite and station positions. Due to the exceptional quality of the on-board clocks and to the high performance of the communication techniques with the satellite, satellite clock monitoring and ground clocks synchronization are anticipated to be performed with uncertainties below 0.5 ns (1 sigma). Uncertainty budgets and related comments are presented.

  16. Technology Assessment of Dust Suppression Techniques Applied During Structural Demolition. Topical Report August1, 1995 - October 30, 1996

    International Nuclear Information System (INIS)

    Hanford, Fernald, Savannah River, and other sites are currently reviewing technologies that can be implemented to demolish buildings in a cost-effective manner. In order to demolish a structure properly and, at the same time, minimize the amount of dust generated from a given technology, an evaluation must be conducted to choose the most appropriate dust suppression technology given site-specific conditions. Thus, the purpose of this research, which was carried out at the Hemispheric Center for Environmental Technology (HCET) at Florida International University, was to conduct an experimental study of dust aerosol abatement (dust suppression) methods as applied to nuclear D and D. This experimental study targeted the problem of dust suppression during the demolition of nuclear facilities. The resulting data were employed to assist in the development of mathematical correlations that can be applied to predict dust generation during structural demolition

  17. Applying monitoring, verification, and accounting techniques to a real-world, enhanced oil recovery operational CO2 leak

    Science.gov (United States)

    Wimmer, B.T.; Krapac, I.G.; Locke, R.; Iranmanesh, A.

    2011-01-01

    The use of carbon dioxide (CO2) for enhanced oil recovery (EOR) is being tested for oil fields in the Illinois Basin, USA. While this technology has shown promise for improving oil production, it has raised some issues about the safety of CO2 injection and storage. The Midwest Geological Sequestration Consortium (MGSC) organized a Monitoring, Verification, and Accounting (MVA) team to develop and deploy monitoring programs at three EOR sites in Illinois, Indiana, and Kentucky, USA. MVA goals include establishing baseline conditions to evaluate potential impacts from CO2 injection, demonstrating that project activities are protective of human health and the environment, and providing an accurate accounting of stored CO2. This paper focuses on the use of MVA techniques in monitoring a small CO2 leak from a supply line at an EOR facility under real-world conditions. The ability of shallow monitoring techniques to detect and quantify a CO2 leak under real-world conditions has been largely unproven. In July of 2009, a leak in the pipe supplying pressurized CO2 to an injection well was observed at an MGSC EOR site located in west-central Kentucky. Carbon dioxide was escaping from the supply pipe located approximately 1 m underground. The leak was discovered visually by site personnel and injection was halted immediately. At its largest extent, the hole created by the leak was approximately 1.9 m long by 1.7 m wide and 0.7 m deep in the land surface. This circumstance provided an excellent opportunity to evaluate the performance of several monitoring techniques including soil CO2 flux measurements, portable infrared gas analysis, thermal infrared imagery, and aerial hyperspectral imagery. Valuable experience was gained during this effort. Lessons learned included determining 1) hyperspectral imagery was not effective in detecting this relatively small, short-term CO2 leak, 2) even though injection was halted, the leak remained dynamic and presented a safety risk concern

  18. Chemistry Notes

    Science.gov (United States)

    School Science Review, 1976

    1976-01-01

    Described are eight chemistry experiments and demonstrations applicable to introductory chemistry courses. Activities include: measure of lattice enthalpy, Le Chatelier's principle, decarboxylation of soap, use of pocket calculators in pH measurement, and making nylon. (SL)

  19. Colour Chemistry

    Science.gov (United States)

    Griffiths, J.; Rattee, I. D.

    1973-01-01

    Discusses the course offerings in pure color chemistry at two universities and the three main aspects of study: dyestuff chemistry, color measurement, and color application. Indicates that there exists a constant challenge to ingenuity in the subject discipline. (CC)

  20. Neutrongraphy technique applied to the narcotics and terrorism enforcement; Neutrongrafia aplicada no combate ao narcotrafico e ao terrorismo

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Ademir X. da; Hacidume, Leo R.; Crispim, Verginia R. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia. Programa de Engenharia Nuclear

    1999-03-01

    Among the several methods of non-destructive essays that may be used for the detection of both drugs and explosives, the ones that utilize nuclear techniques have demonstrated to possess essential qualities for an efficient detection system. These techniques allow the inspection of a large quantity of samples fast, sensibly, specifically and with automatic decision, for they utilize radiation of great power of penetration. This work aims to show the neutron radiography and computed tomography potentiality for the detection of the drugs and explosives even when they are concealed by heavy materials. In the radiographic essays with thermal neutrons, samples of powder cocaine and explosives were inspected, concealed by several materials or not. The samples were irradiated during 30 minutes in the J-9 channel of the Argonauta research reactor of the IEN/CNEN in a neutron flux of 2:5 10{sup 5} n/cm{sup 2}.s. We used two sheets of gadolinium converter with a thickness of 25 {mu}m each one and a Kodak Industrex A5 photographic plaque. A comparative analysis among the tomographic images experimental and simulated obtained by X-ray, fast and thermal neutron is presented. The thermal neutron tomography demonstrate to be the best. (author)

  1. Técnicas quirúrgicas periodontales aplicadas a la implantología Periodontal surgical techniques applied to implantology

    Directory of Open Access Journals (Sweden)

    L Mateos

    2003-08-01

    Full Text Available La similitud morfológica y funcional existente entre los tejidos periimplantarios y los tejidos periodontales ha permitido adaptar técnicas de uso habitual en periodoncia al campo de la implantologia. El manejo de los tejidos periimplantarios de forma correcta buscando como objetivo el mejorar el entorno periimplantario, tanto con fines estéticos como para facilitar el correcto mantenimiento, es una práctica habitual hoy en día en la terapia implantológica. El objetivo de este artículo es revisar la bibliografía referente a estos conceptos y las dístintas técnicas quirúrgicas empleadas en la terapia periodontal que han sido aplicadas en implantologia.Both periodontal and periimplant tissues share morphological and functional characteristics. This allows adapting common used periodontal techniques to the implantology. Nowadays, it is a normal practice to manage the soft periimplant tissues in a correct way, in order to improve the periimplant environment. The aim of this article is to make a literature review of all these concepts as well as the application of some periodontal techniques to the field of the implantology.

  2. Applying multivariate clustering techniques to health data: the 4 types of healthcare utilization in the Paris metropolitan area.

    Directory of Open Access Journals (Sweden)

    Thomas Lefèvre

    Full Text Available Cost containment policies and the need to satisfy patients' health needs and care expectations provide major challenges to healthcare systems. Identification of homogeneous groups in terms of healthcare utilisation could lead to a better understanding of how to adjust healthcare provision to society and patient needs.This study used data from the third wave of the SIRS cohort study, a representative, population-based, socio-epidemiological study set up in 2005 in the Paris metropolitan area, France. The data were analysed using a cross-sectional design. In 2010, 3000 individuals were interviewed in their homes. Non-conventional multivariate clustering techniques were used to determine homogeneous user groups in data. Multinomial models assessed a wide range of potential associations between user characteristics and their pattern of healthcare utilisation.We identified four distinct patterns of healthcare use. Patterns of consumption and the socio-demographic characteristics of users differed qualitatively and quantitatively between these four profiles. Extensive and intensive use by older, wealthier and unhealthier people contrasted with narrow and parsimonious use by younger, socially deprived people and immigrants. Rare, intermittent use by young healthy men contrasted with regular targeted use by healthy and wealthy women.The use of an original technique of massive multivariate analysis allowed us to characterise different types of healthcare users, both in terms of resource utilisation and socio-demographic variables. This method would merit replication in different populations and healthcare systems.

  3. Determination of photocarrier density under continuous photoirradiation using spectroscopic techniques as applied to polymer: Fullerene blend films

    Energy Technology Data Exchange (ETDEWEB)

    Kanemoto, Katsuichi, E-mail: kkane@sci.osaka-cu.ac.jp; Nakatani, Hitomi; Domoto, Shinya [Department of Physics, Osaka City University, 3-3-138 Sugimoto, Sumiyoshi-ku, Osaka 558-8585 (Japan)

    2014-10-28

    We propose a method to determine the density of photocarrier under continuous photoirradiation in conjugated polymers using spectroscopic signals obtained by photoinduced absorption (PIA) measurements. The bleaching signals in the PIA measurements of polymer films and the steady-state absorption signals of oxidized polymer solution are employed to determine the photocarrier density. The method is applied to photocarriers of poly (3-hexylthiophene) (P3HT) in a blended film consisting of P3HT and [6,6]-phenyl C61 butyric acid methyl ester (PCBM). The photocarrier density under continuous photoirradiation of 580 mW/cm{sup 2} is determined to be 3.5 × 10{sup 16 }cm{sup −3}. Using a trend of the carrier density increasing in proportion to the square root of photo-excitation intensity, we provide a general formula to estimate the photocarrier density under simulated 1 sun solar irradiation for the P3HT: PCBM film of an arbitrary thickness. We emphasize that the method proposed in this study enables an estimate of carrier density without measuring a current and can be applied to films with no electrodes as well as to devices.

  4. Positronium chemistry

    CERN Document Server

    Green, James

    1964-01-01

    Positronium Chemistry focuses on the methodologies, reactions, processes, and transformations involved in positronium chemistry. The publication first offers information on positrons and positronium and experimental methods, including mesonic atoms, angular correlation measurements, annihilation spectra, and statistical errors in delayed coincidence measurements. The text then ponders on positrons in gases and solids. The manuscript takes a look at the theoretical chemistry of positronium and positronium chemistry in gases. Topics include quenching, annihilation spectrum, delayed coincidence

  5. Combinatorial chemistry

    DEFF Research Database (Denmark)

    Nielsen, John

    1994-01-01

    An overview of combinatorial chemistry is presented. Combinatorial chemistry, sometimes referred to as `irrational drug design,' involves the generation of molecular diversity. The resulting chemical library is then screened for biologically active compounds.......An overview of combinatorial chemistry is presented. Combinatorial chemistry, sometimes referred to as `irrational drug design,' involves the generation of molecular diversity. The resulting chemical library is then screened for biologically active compounds....

  6. Enhanced performance of CdS/CdTe thin-film devices through temperature profiling techniques applied to close-spaced sublimation deposition

    Energy Technology Data Exchange (ETDEWEB)

    Xiaonan Li; Sheldon, P.; Moutinho, H.; Matson, R. [National Renewable Energy Lab., Golden, CO (United States)

    1996-05-01

    The authors describe a methodology developed and applied to the close-spaced sublimation technique for thin-film CdTe deposition. The developed temperature profiles consisted of three discrete temperature segments, which the authors called the nucleation, plugging, and annealing temperatures. They have demonstrated that these temperature profiles can be used to grow large-grain material, plug pinholes, and improve CdS/CdTe photovoltaic device performance by about 15%. The improved material and device properties have been obtained while maintaining deposition temperatures compatible with commercially available substrates. This temperature profiling technique can be easily applied to a manufacturing environment by adjusting the temperature as a function of substrate position instead of time.

  7. Experiments in physical chemistry

    CERN Document Server

    Wilson, J M; Denaro, A R

    1968-01-01

    Experiments in Physical Chemistry, Second Edition provides a compilation of experiments concerning physical chemistry. This book illustrates the link between the theory and practice of physical chemistry. Organized into three parts, this edition begins with an overview of those experiments that generally have a simple theoretical background. Part II contains experiments that are associated with more advanced theory or more developed techniques, or which require a greater degree of experimental skill. Part III consists of experiments that are in the nature of investigations wherein these invest

  8. Mathematics for physical chemistry

    CERN Document Server

    Mortimer, Robert G

    2013-01-01

    Mathematics for Physical Chemistry is the ideal supplementary text for practicing chemists and students who want to sharpen their mathematics skills while enrolled in general through physical chemistry courses. This book specifically emphasizes the use of mathematics in the context of physical chemistry, as opposed to being simply a mathematics text. This 4e includes new exercises in each chapter that provide practice in a technique immediately after discussion or example and encourage self-study. The early chapters are constructed around a sequence of mathematical topics, wit

  9. Restoration of badlands through applying bio-engineering techniques in active gully systems: Evidence from the Ecuadorian Andes

    Science.gov (United States)

    Borja, P.; Vanacker, V.; Alvarado, D.; Govers, G.

    2012-04-01

    A better insight in the processes controlling sediment generation, transport and deposition in badlands is necessary to enhance restoration of degraded soils through eco-engineering techniques. In this study, we evaluate the effect of different bio-engineering measures on soil and slope stability. Five micro-catchments (of 0.2 to 5 ha) were selected within a 3 km2 area in the lower part of the Loreto catchment (Southern Ecuadorian Andes). The micro-catchments differ only by land cover and degree of implementation of soil and water conservation measures. Bio-engineering techniques were used to construct dikes made of fascines of wooden sticks and earth-filled tires in active gully beds, where they are most efficient to reduce water and sediment transport. The experimental design consists of three micro-catchments within highly degraded lands: (DI) micro-catchment with bio-engineering measures concentrated in the active gully beds, (DF) with reforestation of Eucalyptus trees, and (DT) reference situation without any conservation measures. Two micro-catchments were monitored in agricultural lands with (AI) and without (AT) bio-engineering measures in the active gully beds. All catchments were equipped with San Dimas flumes to measure water flow, and sediment traps to monitor sediment export. In the (active) gully beds, various parameters related to gully stability (soil water content, bed elevation, vegetation cover, sedimentation/erosion) were monitored at weekly intervals. First results show that bio-engineering techniques are efficient to stabilize active gully beds through a reduction of the rapid concentration of excess rainfall and the sediment production and transfer. Fascines made of wooden sticks are far more efficient than earth-filled tires. Sediment deposition behind dikes is strongly dependent on precedent rainfall events, and the slope and vegetation cover of the gully floor. The sediment deposited facilitates colonization of the gully floor by native

  10. Gas phase ion chemistry

    CERN Document Server

    Bowers, Michael T

    1979-01-01

    Gas Phase Ion Chemistry, Volume 2 covers the advances in gas phase ion chemistry. The book discusses the stabilities of positive ions from equilibrium gas-phase basicity measurements; the experimental methods used to determine molecular electron affinities, specifically photoelectron spectroscopy, photodetachment spectroscopy, charge transfer, and collisional ionization; and the gas-phase acidity scale. The text also describes the basis of the technique of chemical ionization mass spectrometry; the energetics and mechanisms of unimolecular reactions of positive ions; and the photodissociation

  11. Forensic Chemistry Training

    OpenAIRE

    GERÇEK, Zuhal

    2012-01-01

    Increasing the types of terrorism and crime nowadays, the importance of the forensic sciences can be bett er understood. Forensic science is the application of the wide spectrum of science to answer the question of legal system. It contains the application of the principles, techniques and methods of basic sciences and its main aim is the determination of the physical facts which are important in legal situations. Forensic chemistry is the branch of chemistry which performs the chemical analy...

  12. Improved general physical fitness of young swimmers by applying in the training process of endogenous hypoxic breathing techniques

    Directory of Open Access Journals (Sweden)

    Furman Y.M.

    2014-06-01

    Full Text Available Purpose : to examine the effect of general physical preparedness of young swimmers in the body artificially created state hypercapnic normobaric hypoxia. Material : the study involved 21 swimmer aged 13-14 years with sports qualifications at third and second sports categories. Results : the original method of working with young swimmers. Studies were conducted for 16 weeks a year preparatory period macrocycle. The average value of the index on the results of general endurance races 800m improved by 2.80 %. 8.24 % increased speed- strength endurance and 18.77 % increased dynamic strength endurance. During the period of formative experiment performance speed, agility, static endurance, flexibility and explosive strength athletes first experimental group was not significantly changed. Conclusions : it was found that the use of the proposed technique provides statistically significant increase in overall endurance, speed strength endurance and dynamic strength endurance.

  13. A Non-Invasive Thermal Drift Compensation Technique Applied to a Spin-Valve Magnetoresistive Current Sensor

    Science.gov (United States)

    Moreno, Jaime Sánchez; Muñoz, Diego Ramírez; Cardoso, Susana; Berga, Silvia Casans; Antón, Asunción Edith Navarro; de Freitas, Paulo Jorge Peixeiro

    2011-01-01

    A compensation method for the sensitivity drift of a magnetoresistive (MR) Wheatstone bridge current sensor is proposed. The technique was carried out by placing a ruthenium temperature sensor and the MR sensor to be compensated inside a generalized impedance converter circuit (GIC). No internal modification of the sensor bridge arms is required so that the circuit is capable of compensating practical industrial sensors. The method is based on the temperature modulation of the current supplied to the bridge, which improves previous solutions based on constant current compensation. Experimental results are shown using a microfabricated spin-valve MR current sensor. The temperature compensation has been solved in the interval from 0 °C to 70 °C measuring currents from −10 A to +10 A. PMID:22163748

  14. A non-invasive thermal drift compensation technique applied to a spin-valve magnetoresistive current sensor.

    Science.gov (United States)

    Sánchez Moreno, Jaime; Ramírez Muñoz, Diego; Cardoso, Susana; Casans Berga, Silvia; Navarro Antón, Asunción Edith; Peixeiro de Freitas, Paulo Jorge

    2011-01-01

    A compensation method for the sensitivity drift of a magnetoresistive (MR) Wheatstone bridge current sensor is proposed. The technique was carried out by placing a ruthenium temperature sensor and the MR sensor to be compensated inside a generalized impedance converter circuit (GIC). No internal modification of the sensor bridge arms is required so that the circuit is capable of compensating practical industrial sensors. The method is based on the temperature modulation of the current supplied to the bridge, which improves previous solutions based on constant current compensation. Experimental results are shown using a microfabricated spin-valve MR current sensor. The temperature compensation has been solved in the interval from 0 °C to 70 °C measuring currents from -10 A to +10 A. PMID:22163748

  15. A Non-Invasive Thermal Drift Compensation Technique Applied to a Spin-Valve Magnetoresistive Current Sensor

    Directory of Open Access Journals (Sweden)

    Paulo Jorge Peixeiro de Freitas

    2011-02-01

    Full Text Available A compensation method for the sensitivity drift of a magnetoresistive (MR Wheatstone bridge current sensor is proposed. The technique was carried out by placing a ruthenium temperature sensor and the MR sensor to be compensated inside a generalized impedance converter circuit (GIC. No internal modification of the sensor bridge arms is required so that the circuit is capable of compensating practical industrial sensors. The method is based on the temperature modulation of the current supplied to the bridge, which improves previous solutions based on constant current compensation. Experimental results are shown using a microfabricated spin-valve MR current sensor. The temperature compensation has been solved in the interval from 0 °C to 70 °C measuring currents from −10 A to +10 A.

  16. Systematic study of the effects of mass and time scaling techniques applied in numerical rock mechanics simulations

    Science.gov (United States)

    Heinze, Thomas; Jansen, Gunnar; Galvan, Boris; Miller, Stephen A.

    2016-08-01

    Numerical modeling is a well established tool in rock mechanics studies investigating a wide range of problems. Implicit methods for solving linear equations have the advantage of being unconditionally stable, while explicit methods, although limited by the time step, are often used because of their limited memory demand, their scalability in parallel computing, and simple implementation of complex boundary conditions. In numerical modeling of explicit elastoplastic dynamics where the time step is limited by the material density, mass scaling techniques can be used to overcome this limit and significantly reduce computation time. While often used, the effect of mass and time scaling and how it may influence the numerical results is rarely-mentioned in publications, and choosing the right scaling technique is typically performed by trial and error. To our knowledge, no systematic studies have addressed how mass scaling might affect the numerical results. In this paper, we present results from an extensive and systematic study of the influence of mass and time scaling on the behavior of a variety of rock-mechanical models. We employ a finite difference scheme to model uniaxial and biaxial compression experiments using different mass and time scaling factors, and with physical models of increasing complexity up to a cohesion-weakening frictional-strengthening model (CWFS). We also introduce a normalized energy ratio to assist analyzing mass scaling effects. We find the tested models to be less sensitive to time scaling than to mass scaling, so mass scaling has higher potential for decreasing computational costs. However, we also demonstrate that mass scaling may lead to quantitatively wrong results, so care must be taken in interpreting stress values when mass scaling is used in complicated rock mechanics simulations. Mass scaling significantly influences the stress-strain response of numerical rocks because mass scaling acts as an artificial hardening agent on rock

  17. On the formulation of species reaction rates in the context of multi-species CFD codes using complex chemistry tabulation techniques

    Energy Technology Data Exchange (ETDEWEB)

    Michel, Jean-Baptiste; Colin, Olivier; Angelberger, Christian [IFP, 1 et 4 Avenue de Bois Preau, F-92500 Rueil Malmaison (France)

    2010-04-15

    In the standard implementation of tabulated combustion models of the FPI or FGM type, the mean species mass fractions are read from look-up tables as functions of a progress variable, mixture fraction and their variances. In multi-species CFD codes however, the mean thermodynamic properties are deduced from the local mean species mass fractions. The unclosed mean source terms appearing in the latter's transport equations must then be given by the chemistry look-up tables. Two possible formulations for this mean source terms are discussed and compared in the present paper. In the reaction rate (RR) formulation, all mean reaction rates are directly read from a look-up table. In the mass fraction (MF) formulation, only the reaction rate for the progress variable is stored, and mean species source terms are constructed to relax the mean mass fractions towards the value stored in the look-up table. After a detailed description of in particular the MF formulation, simple a priori tests of auto-igniting reactors without convection and diffusion are used to illustrate and discuss the differences between the two formulations. Both formulations are then applied to a RANS simulation of the Cabra et al. burner in the context of a PCM-FPI and of an ADF-PCM model. The reported findings confirm the conclusions from the simple tests, highlighting the definitive advantages of the MF formulation. It ensures an accurate reproduction of auto-ignition delays, species evolutions and equilibriums, at the condition that the relaxation parameter is of the order of a characteristic chemical time. Finally, it is shown that the relaxation's effect is only a second order correction. (author)

  18. The Application of SCC-DV-Xα Computational Method of Quantum Chemistry in Cement Chemistry

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    It has been explored why quantum chemistry is applied to the research field of cement chemistry. The fundamental theory of SCC-DV-Xα computational method of quantum chemistry is synopsized. The results obtained by computational quantum chemistry method in recent years of valence-bond structures and hydration activity of some cement clinker minerals, mechanical strength and stabilization of some hydrates are summarized and evaluated. Finally the prospects of the future application of quantum chemistry to cement chemistry are depicted.

  19. Comparison of partial least squares and lasso regression techniques as applied to laser-induced breakdown spectroscopy of geological samples

    Science.gov (United States)

    Dyar, M. D.; Carmosino, M. L.; Breves, E. A.; Ozanne, M. V.; Clegg, S. M.; Wiens, R. C.

    2012-04-01

    A remote laser-induced breakdown spectrometer (LIBS) designed to simulate the ChemCam instrument on the Mars Science Laboratory Rover Curiosity was used to probe 100 geologic samples at a 9-m standoff distance. ChemCam consists of an integrated remote LIBS instrument that will probe samples up to 7 m from the mast of the rover and a remote micro-imager (RMI) that will record context images. The elemental compositions of 100 igneous and highly-metamorphosed rocks are determined with LIBS using three variations of multivariate analysis, with a goal of improving the analytical accuracy. Two forms of partial least squares (PLS) regression are employed with finely-tuned parameters: PLS-1 regresses a single response variable (elemental concentration) against the observation variables (spectra, or intensity at each of 6144 spectrometer channels), while PLS-2 simultaneously regresses multiple response variables (concentrations of the ten major elements in rocks) against the observation predictor variables, taking advantage of natural correlations between elements. Those results are contrasted with those from the multivariate regression technique of the least absolute shrinkage and selection operator (lasso), which is a penalized shrunken regression method that selects the specific channels for each element that explain the most variance in the concentration of that element. To make this comparison, we use results of cross-validation and of held-out testing, and employ unscaled and uncentered spectral intensity data because all of the input variables are already in the same units. Results demonstrate that the lasso, PLS-1, and PLS-2 all yield comparable results in terms of accuracy for this dataset. However, the interpretability of these methods differs greatly in terms of fundamental understanding of LIBS emissions. PLS techniques generate principal components, linear combinations of intensities at any number of spectrometer channels, which explain as much variance in the

  20. Comparison of partial least squares and lasso regression techniques as applied to laser-induced breakdown spectroscopy of geological samples

    Energy Technology Data Exchange (ETDEWEB)

    Dyar, M.D., E-mail: mdyar@mtholyoke.edu [Dept. of Astronomy, Mount Holyoke College, 50 College St., South Hadley, MA 01075 (United States); Carmosino, M.L.; Breves, E.A.; Ozanne, M.V. [Dept. of Astronomy, Mount Holyoke College, 50 College St., South Hadley, MA 01075 (United States); Clegg, S.M.; Wiens, R.C. [Los Alamos National Laboratory, P.O. Box 1663, MS J565, Los Alamos, NM 87545 (United States)

    2012-04-15

    A remote laser-induced breakdown spectrometer (LIBS) designed to simulate the ChemCam instrument on the Mars Science Laboratory Rover Curiosity was used to probe 100 geologic samples at a 9-m standoff distance. ChemCam consists of an integrated remote LIBS instrument that will probe samples up to 7 m from the mast of the rover and a remote micro-imager (RMI) that will record context images. The elemental compositions of 100 igneous and highly-metamorphosed rocks are determined with LIBS using three variations of multivariate analysis, with a goal of improving the analytical accuracy. Two forms of partial least squares (PLS) regression are employed with finely-tuned parameters: PLS-1 regresses a single response variable (elemental concentration) against the observation variables (spectra, or intensity at each of 6144 spectrometer channels), while PLS-2 simultaneously regresses multiple response variables (concentrations of the ten major elements in rocks) against the observation predictor variables, taking advantage of natural correlations between elements. Those results are contrasted with those from the multivariate regression technique of the least absolute shrinkage and selection operator (lasso), which is a penalized shrunken regression method that selects the specific channels for each element that explain the most variance in the concentration of that element. To make this comparison, we use results of cross-validation and of held-out testing, and employ unscaled and uncentered spectral intensity data because all of the input variables are already in the same units. Results demonstrate that the lasso, PLS-1, and PLS-2 all yield comparable results in terms of accuracy for this dataset. However, the interpretability of these methods differs greatly in terms of fundamental understanding of LIBS emissions. PLS techniques generate principal components, linear combinations of intensities at any number of spectrometer channels, which explain as much variance in the

  1. Artificial intelligence techniques applied to the development of a decision–support system for diagnosing celiac disease

    Science.gov (United States)

    Tenório, Josceli Maria; Hummel, Anderson Diniz; Cohrs, Frederico Molina; Sdepanian, Vera Lucia; Pisa, Ivan Torres; de Fátima Marin, Heimar

    2013-01-01

    Background Celiac disease (CD) is a difficult-to-diagnose condition because of its multiple clinical presentations and symptoms shared with other diseases. Gold-standard diagnostic confirmation of suspected CD is achieved by biopsying the small intestine. Objective To develop a clinical decision–support system (CDSS) integrated with an automated classifier to recognize CD cases, by selecting from experimental models developed using intelligence artificial techniques. Methods A web-based system was designed for constructing a retrospective database that included 178 clinical cases for training. Tests were run on 270 automated classifiers available in Weka 3.6.1 using five artificial intelligence techniques, namely decision trees, Bayesian inference, k-nearest neighbor algorithm, support vector machines and artificial neural networks. The parameters evaluated were accuracy, sensitivity, specificity and area under the ROC curve (AUC). AUC was used as a criterion for selecting the CDSS algorithm. A testing database was constructed including 38 clinical CD cases for CDSS evaluation. The diagnoses suggested by CDSS were compared with those made by physicians during patient consultations. Results The most accurate method during the training phase was the averaged one-dependence estimator (AODE) algorithm (a Bayesian classifier), which showed accuracy 80.0%, sensitivity 0.78, specificity 0.80 and AUC 0.84. This classifier was integrated into the web-based decision–support system. The gold-standard validation of CDSS achieved accuracy of 84.2% and k = 0.68 (p < 0.0001) with good agreement. The same accuracy was achieved in the comparison between the physician’s diagnostic impression and the gold standard k = 0. 64 (p < 0.0001). There was moderate agreement between the physician’s diagnostic impression and CDSS k = 0.46 (p = 0.0008). Conclusions The study results suggest that CDSS could be used to help in diagnosing CD, since the algorithm tested achieved excellent

  2. A depth-of-field limited particle image velocimetry technique applied to oscillatory boundary layer flow over a porous bed

    Energy Technology Data Exchange (ETDEWEB)

    Lara, J.L. [Ocean and Coastal Research Group, Universidad de Cantabria, E.T.S.I.C.C. y P., Av. Los Castros s/n, 39005 Santander (Spain); Cowen, E.A.; Sou, I.M. [DeFrees Hydraulics Laboratory, School of Civil and Environmental Engineering, Hollister Hall, Cornell University, Ithaca, NY 14853-3501 (United States)

    2002-07-01

    Boundary layer flows are ubiquitous in the environment, but their study is often complicated by their thinness, geometric irregularity and boundary porosity. In this paper, we present an approach to making laboratory-based particle image velocimetry (PIV) measurements in these complex flow environments. Clear polycarbonate spheres were used to model a porous and rough bed. The strong curvature of the spheres results in a diffuse volume illuminated region instead of the more traditional finite and thin light sheet illuminated region, resulting in the imaging of both in-focus and significantly out-of-focus particles. Results of a traditional cross-correlation-based PIV-type analysis of these images demonstrate that the mean and turbulent features of an oscillatory boundary layer driven by a free-surface wave over an irregular-shaped porous bed can be robustly measured. Measurements of the mean flow, turbulent intensities, viscous and turbulent stresses are presented and discussed. Velocity spectra have been calculated showing an inertial subrange confirming that the PIV analysis is sufficiently robust to extract turbulence. The presented technique is particularly well suited for the study of highly dynamic free-surface flows that prevent the delivery of the light sheet from above the bed, such as swash flows. (orig.)

  3. Applying Information Retrieval Techniques to Detect Duplicates and to Rank References in the Preliminary Phases of Systematic Literature Reviews

    Directory of Open Access Journals (Sweden)

    Ramon Abilio

    2015-08-01

    Full Text Available Systematic Literature Review (SLR is a means to synthesize relevant and high quality studies related to a specific topic or research questions. In the Primary Selection stage of an SLR, the selection of studies is usually performed manually by reading title, abstract and keywords of each study. In the last years, the number of published scientific studies has grown increasing the effort to perform this sort of reviews. In this paper, we proposed strategies to detect non-papers and duplicated references in results exported by search engines, and strategies to rank the references in decreasing order of importance for an SLR, regarding the terms in the search string. These strategies are based on Information Retrieval techniques. We implemented the strategies and carried out an experimental evaluation of their applicability using two real datasets. As results, the strategy to detect non-papers presented 100% of precision and 50% of recall; the strategy to detect duplicates detected more duplicates than the manual inspection; and one of the strategies to rank relevant references presented 50% of precision and 80% of recall. Therefore, the results show that the proposed strategies can minimize the effort in the Primary Selection stage of an SLR.

  4. New Techniques of LASS-ICPMS Depth Profiling Applied to Detrital Zircon from the Central Alps-Apennines System

    Science.gov (United States)

    Anfinson, O. A.; Smye, A.; Stockli, D. F.

    2014-12-01

    Detrital zircon U-Pb age dating has become a widely used tool for determining sediment provenance in basins and orogenic systems. While traditional LA-ICPMS zircon geochronology is powerful, it has limitations when source regions are characterized by monotonous or non-diagnostic crystallization ages or by major sediment recycling and homogenization, leading to minimal zircon age variability. In the central Alps of Switzerland and Italy, for example, similar Cadomian, Caledonian, and Variscan zircons dominate with only minor Alpine ages. Samples collected from Oligocene-Miocene strata deposited in both the northern (Swiss Molasse) and southern (Apenninic foredeep) Alpine foreland basins document shifts in the relative abundance of Cadomian, Caledonian, Variscan and Alpine aged detrital zircon, but the exact source region and genesis of the grains remains poorly constrained based on zircon U-Pb age data alone. Laser Ablation Split Stream (LASS)-ICPMS depth profiling of detrital zircon allows for the simultaneous recovery of multiple ages and of chemical/petrogenetic data from single zircons, and has the potential to shed additional light on provenance. This study applies this approach to Oligocene-Miocene strata of the Swiss Molasse Basin and Apenninic foredeep. Recent advances in LA-ICPMS sample cell technology allow for reliable recovery of age and trace element data during progressive ablation into zircons. Decreased washout (rim-core relationships and REE/trace element abundances from grains of the major orogenic cycles, further constraining the provenance of these strata.

  5. Experimental measurement of noise-removal techniques for Compton backscatter imaging systems as applied to the detection of landmines

    Science.gov (United States)

    Wehlburg, Joseph C.; Keshavmurthy, Shyam P.; Dugan, Edward T.; Jacobs, Alan M.

    1996-05-01

    The measurement and removal of noise from images created using lateral migration backscatter radiography (LMBR) a form of Compton backscatter imaging (CBI) is applied to the detection and identification of landmines. The photons that interact with the landmine produce the signal component of interest. The signal is corrupted by both quantum and structured noise. The structured noise is due to photon interaction with non-mine material. Due to the strong response of all detectors to soil surface features and other buried objects, image enhancement methods are essential for landmine identification. A four detector system is used to generate the LMBR/CB images. The inner two detectors are uncollimated and positioned to optimally detect first scattered photons. The outer detectors are collimated to detect photons that have had two or more scatterings. The difference between the collimated and uncollimated detector responses to the different types of landmine image masking phenomena, form the basis of the image enhancement and landmine identification procedures. The surface feature information is obtained by the uncollimated detectors. The collimated detector signal contains information about the surface features as well as the buried objects. Using images from these two sets of detectors the surface objects can be analyzed for possible landmines and then removed. The buried objects can then be resolved. The measurements and image enhancements demonstrate that it is possible to detect 12' plastic landmines at a buried of 3' under simulated battlefield conditions.

  6. New technique of insitu soil moisture sampling for environmental isotope analysis applied at 'Pilat-dune' near Bordeaux

    International Nuclear Information System (INIS)

    A new soil-air suction method with soil water vapor adsorption by 4 A-molecular sieve provides soil moisture samples from various depths for environmental isotope analysis and yields soil temperature profiles. A field tritium tracer experiment shows that this insitu sampling method has an isotope profile resolution of about 5-10 cm only. Application of this method in the Pilat sand dune (Bordeaux/France) yielded deuterium and tritium profiles down to 25 meters depth. Bomb tritium measurements of monthly lysimeter percolate samples available since 1961 show that the tritium response has a mean delay of 5 months in case of a sand lysimeter and of 2.5 years for a loess loam lysimeter. A simple HETP model simulates the layered downward movement of soil water and the longitudinal dispersion in the lysimeters. Field capacity and evapotranspiration taken as open parameters yield tritium concentration values of the lysimeters' percolate which are in close agreement with the experimental results. Based on local meteorological data the HETP model applied to tritium tracer experiments in the unsaturated zone further yiels an individual prediction of the momentary tracer position and of the soil moisture distribution. This prediction can be checked experimentally at selected intervals by coring. (orig.)

  7. Chemistry Division progress report for the period January 1, 1977 - December 31, 1980

    International Nuclear Information System (INIS)

    The research and development work of the Chemistry Division of the Bhabha Atomic Research Centre, Bombay, during the period 1977-1980 is reported in the form of individual summaries under the headings: basic research including radiation chemistry, photochemistry, kinetic and electrochemical studies, ion exchange and sorption behaviour, chemistry of metal complexes (in particular, of uranium complexes), radiation damage in solids, heterogeneous catalysts, studies in magnetism, physical properties, solid state studies, theoretical studies, reactor related programmes (including reactor chemistry, lubricants and sealants, surface studies, water chemistry), applied research and development (including materials development, purification and analytical techniques, apolied radiation chemistry etc.), and instrumentation. Work of service facilities such as workshop, analytical se services, and repair and maintenance of instruments is described. Lists of training programmes, staff publications and divisional seminars, are given. At the end a sectionwise list of staff members is also given. (M.G.B.)

  8. The improving of ventilometric indices using Airway Clearance Techniques Asociated with Inhalation Therapy applied to adolescents with cystic fibrosis

    Directory of Open Access Journals (Sweden)

    Bogdan Almăjan-Guţă

    2010-12-01

    Full Text Available Introduction: this study gave particular attention to respiratory damage, lung disease being the main target for developingtherapies in MV. The purpose of this study was to demonstrate the efficiency of Classical Respiratory clearance techniquescombined with Inhalation Therapy and to compare the results of using acetylcysteine with those of using Pulmozyme Therapy.Aerosol (inhalation therapy is, along with exercise and respiratory clearance techniques, the third component in thephysiotherapy of patients with CF. Material and method: the study was developed during a period of six months, in TheNational Center of Cystic Fibrosis, Clinic II of Pediatrics in the Emergency County Hospital, Timisoara. The study group consistedof 12 children with MV . This group was divided into two groups of 6 patients (group 1 and group 2. Group 1 followedinhalation treatment with acetylcysteine, and group 2 with Pulmozyme. Results: The evaluation of the results was done after 2months and 6 months since the study started, by measuring the FEV, and FVC. For the first group, that used acetylcysteine inthe inhalation therapy, we observed, after 6 months, an increase of FEV with an average of 2.08% and of FVC with 2.13%.Thegrowth of ventilometric indices were relatively accelerated in the first two months and later there was a slower growth,achieving final value. For the second group, that used Pulmozyme, the growth of ventilometric indices was significantly higher.Discussion: considering the two relatively homogeneous groups, in what concerns the values of ventilometric indices andsuperimposed infection, we believe that inhaled Pulmozyme therapy proved to be superior to acetylcysteine. Conclusions:inhalation therapy is an important part of physiotherapy for patients with cystic fibrosis. A consistent physiotherapy is probablythe most important element in preventing chronic pulmonary infection and, along with antibiotherapy, improves significantlythe prognosis and helps

  9. Spartans: Single-Sample Periocular-Based Alignment-Robust Recognition Technique Applied to Non-Frontal Scenarios.

    Science.gov (United States)

    Juefei-Xu, Felix; Luu, Khoa; Savvides, Marios

    2015-12-01

    In this paper, we investigate a single-sample periocular-based alignment-robust face recognition technique that is pose-tolerant under unconstrained face matching scenarios. Our Spartans framework starts by utilizing one single sample per subject class, and generate new face images under a wide range of 3D rotations using the 3D generic elastic model which is both accurate and computationally economic. Then, we focus on the periocular region where the most stable and discriminant features on human faces are retained, and marginalize out the regions beyond the periocular region since they are more susceptible to expression variations and occlusions. A novel facial descriptor, high-dimensional Walsh local binary patterns, is uniformly sampled on facial images with robustness toward alignment. During the learning stage, subject-dependent advanced correlation filters are learned for pose-tolerant non-linear subspace modeling in kernel feature space followed by a coupled max-pooling mechanism which further improve the performance. Given any unconstrained unseen face image, the Spartans can produce a highly discriminative matching score, thus achieving high verification rate. We have evaluated our method on the challenging Labeled Faces in the Wild database and solidly outperformed the state-of-the-art algorithms under four evaluation protocols with a high accuracy of 89.69%, a top score among image-restricted and unsupervised protocols. The advancement of Spartans is also proven in the Face Recognition Grand Challenge and Multi-PIE databases. In addition, our learning method based on advanced correlation filters is much more effective, in terms of learning subject-dependent pose-tolerant subspaces, compared with many well-established subspace methods in both linear and non-linear cases. PMID:26285149

  10. Combined chemical oxidation and membrane filtration techniques applied to the removal of some selected pharmaceuticals from water systems.

    Science.gov (United States)

    Real, Francisco J; Benitez, F Javier; Acero, Juan L; Roldan, Gloria

    2012-01-01

    The elimination of five selected pharmaceuticals (amoxicillin, hydrochlorothiazide, metoprolol, naproxen and phenacetin) dissolved in different water systems (two natural water matrices and a secondary effluent) was carried out by sequential processes constituted by membrane filtration and chemical oxidation stages. Different configurations of those two stages were applied. In a first group, a pretreatment consisting in a membrane filtration (ultrafiltration or nanofiltration) was conducted; and the permeate and retentate effluents produced were afterwards treated by chemical oxidation, using ozone or chlorine. In a second group, the pretreatment consisted in a chemical oxidation stage (by using ozone, chlorine, O(3)/H(2)O(2), UV or UV/H(2)O(2)) followed by a nanofiltration process. The main objective of this set of experiments was the comparison of the efficiencies reached by using different systems and configurations in order to optimize the elimination of those pollutants from the selected water matrices. Results of removals and rejection coefficients for the five pharmaceuticals showed that the combined treatments involving UV radiation (254 nm monochromatic radiation during 30 min) followed by nanofiltration were very effective, with global removals over 80 % in most of the experiments. Ozonation (initial dose of 2.25 mg L(-1)) followed by nanofiltration also showed high levels of efficiency, with removals over 70 % in the permeate stream generated in experiments carried out with natural waters. The opposite sequence, nanofiltration followed by ozonation, reached removals over 97 % in the natural waters by using an ozone dose of 2.25 mg L(-1); and over 90 % in the secondary effluent with an initial ozone dose of 3.75 mg L(-1).

  11. Modelling regional response of lakewater chemistry to changes in acidic deposition: the MAGIC model applied to lake surveys in southernmost Norway 1974-1986-1995

    Directory of Open Access Journals (Sweden)

    B. J. Cosby

    1998-01-01

    Full Text Available Two methods for modelling regional responses of lake water quality to changes in acidic deposition in southernmost Norway were examined. Both methods are based upon the MAGIC model but differ in mode of regional application; one uses site-specific while the other uses Monte-Carlo methods for model calibration. The simulations of regional responses from both methods were compared with observed responses based on data from three lake surveys in southernmost Norway conducted in 1974, 1986 and 1995. The regional responses of the two modelling approaches were quite similar and agreed well with the observed regional distributions of lakewater chemistry variables. From 1974 to 1986 the observed data indicated that despite a decline of approximately 10% in sulphate (SO4 deposition, the mean acid neutralizing capacity (ANC of lakes in southernmost Norway declined by approximately 6 μeq l-1. Both modelling approaches simulated no change or a very small decline in mean ANC for that period. From 1986 to 1995 the observed data indicated that, in response to an approximate 40% decline in SO4 deposition, the mean ANC of lakes in southernmost Norway increased by 11-16 μeq l-1. The modelling approaches simulated increases of 9-10 μeq l-1 in mean ANC for the same period. Both simulations and observations indicate that > 65% of lakes in southernmost Norway were acidic in 1974 and 1995. Both simulation methods predict that >65% of the lakes in southernmost Norway will have positive ANC values within 10 years of reductions of SO4 deposition to 20% of 1974 levels. Of the two regionalization methods the site-specific method appears preferable, because whereas the Monte-Carlo method gives results for a region as a whole, the site-specific method also reveals patterns within the region. The maintenance of a one-to-one correspondence between simulated and observed systems means that simulation results can be mapped for a geographically explicit presentation of model

  12. Exploration of Reform of Physical Chemistry Experiment Teaching in Cultivation of Applied Innovative Talents%改革物理化学实验教学培养应用型创新人才的探索

    Institute of Scientific and Technical Information of China (English)

    户敏; 邵晨; 田志壮; 董文惠; 陈敏; 陈秀菊

    2014-01-01

    Physical Chemistry Experiment was an important approach to cultivate applied innovative talents .The insufficiency of traditional experimental teaching mode and the requirement of reformation were discussed .To cultivate student ’ innovation ability and excellent quality was the main object of physical chemistry experiment .On the base of the exploration and practice on pre -course reading , teaching mode , teaching process , and examination in this course , the teaching quality was guaranteed , the students ’ innovation spirit was trained , and good results were got.%物理化学实验课是培养应用型创新人才的重要途径。本文分析了传统实验教学模式存在的弊端和改革的必要性,将培养学生创新能力和优良素质作为物理化学实验教学的主要目标,通过对课前预习、教学模式、教学过程、考核等诸方面进行了探索与实践,保证了教学质量,提高了学生的科研能力,培养了学生的创新精神,取得了良好的教学效果。

  13. The rotary dual technique for total skin irradiation in the treatment of mycosis fungoides - a description of the applied method

    International Nuclear Information System (INIS)

    Background: The aim of total skin electron irradiation in the therapy of mycosis fungoides is to obtain total or partial remission of the disease while concurrently lowering the toxicity level. Total skin electron radiotherapy should fulfill the EORTC requirements from the year 2002. Aim: The aim of this work is to present the rotary dual method for total skin electron irradiation used in the Great Poland Cancer Centre including its specific c technical and physical aspects. These aspects include the parameters and conditions for the treatment (geometrical conditions of the technique, homogeneity of the dose, patients positioning, additional fields and the method of dose fractionation), the absolute dosimetry (parameters and functions characterizing the electron irradiation beam used in the rotary dual method of the rotary dual method of the total skin electron irradiation) and in-vivo dosimetry conducted during the therapy with rotary dual fields, which allowed to control the dose distribution and to indicate additional skin areas, which should be irradiated with local fields. Materials/Methods: The rotary dual method of the Total Skin Electron Irradiation proposed by the author, is based on the combination of the two most frequently used methods: 1) six dual fields method and 2) rotary method. The original, calculation algorithm elaborated by the author was based on the two dimensional algorithm proposed by Podgorsak et al. Results: The new algorithm, proposed by the author takes into the changes in doses along the vertical and horizontal axis of the object. Moreover the elliptical; shape of the object proposed by the author, is more approximated to the shape of the patient than the cylindrical object proposed by Podgorsak et al. Discussion: Parameters used by authors: nominal energy - 6 MeV, mean energy at the skin surface - 2.8 MeV, values of the PDD (at the skin surface - 100 %, at the 4 mm - 83.6 % and at the 20 mm - 1.8 %), SSD - 300 cm, field size equal to

  14. Eleventh international symposium on radiopharmaceutical chemistry

    International Nuclear Information System (INIS)

    This document contains abstracts of papers which were presented at the Eleventh International Symposium on Radiopharmaceutical Chemistry. Sessions included: radiopharmaceuticals for the dopaminergic system, strategies for the production and use of labelled reactive small molecules, radiopharmaceuticals for measuring metabolism, radiopharmaceuticals for the serotonin and sigma receptor systems, labelled probes for molecular biology applications, radiopharmaceuticals for receptor systems, radiopharmaceuticals utilizing coordination chemistry, radiolabelled antibodies, radiolabelling methods for small molecules, analytical techniques in radiopharmaceutical chemistry, and analytical techniques in radiopharmaceutical chemistry

  15. Eleventh international symposium on radiopharmaceutical chemistry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    This document contains abstracts of papers which were presented at the Eleventh International Symposium on Radiopharmaceutical Chemistry. Sessions included: radiopharmaceuticals for the dopaminergic system, strategies for the production and use of labelled reactive small molecules, radiopharmaceuticals for measuring metabolism, radiopharmaceuticals for the serotonin and sigma receptor systems, labelled probes for molecular biology applications, radiopharmaceuticals for receptor systems, radiopharmaceuticals utilizing coordination chemistry, radiolabelled antibodies, radiolabelling methods for small molecules, analytical techniques in radiopharmaceutical chemistry, and analytical techniques in radiopharmaceutical chemistry.

  16. Reform and Innovation of Practice Teaching of Applied Chemistry Specialty in Normal University%师范院校应用化学专业实践教学的改革与创新

    Institute of Scientific and Technical Information of China (English)

    张伟娜; 赵丽娜; 王继库; 张兴晶; 连兰

    2016-01-01

    强调国家对实践教学的重视。针对目前师范院校应用化学专业实践教学中存在的对实践教学的重视程度不够、实验教学内容和方式不灵活、学生主观能动意识不强等问题。提出吉林师范大学应用化学专业实践教学体系的改革措施,通过优化实验教学内容、夯实基本操作提高学生创新意识;通过改革实验教学方式,进而发挥学生主观能动性;通过完善实习见习,进一步强化实践技能;通过加强毕业设计,最终提升学生综合素质。%The emphasis on practice teaching of our Country was emphasized, firstly. With the existing problems in the practice teaching of applied chemistry specialty in normal university, for examples, more attention had not been paid to the practice teaching, the experimental teaching content and mode was not flexible, the subjective consciousness of students was not strong, and so on. Thus, the reform measures of the practice teaching system of applied chemistry specialty in Jilin Normal University were presented, improving innovative consciousness of the students through optimizing the experimental teaching content and reinforcing basic operation, bringing into the subjective enthusiasm of the students through reforming the experimental teaching method, to further strengthen the practical skills through perfecting the internship, to enhance the overall quality of students through strengthening the graduation design.

  17. Bioinorganic Chemistry

    OpenAIRE

    Bertini, Ivano; Gray, Harry B.; Lippard, Stephen J.; Valentine, Joan Selverstone

    1994-01-01

    This book covers material that could be included in a one-quarter or one-semester course in bioinorganic chemistry for graduate students and advanced undergraduate students in chemistry or biochemistry. We believe that such a course should provide students with the background required to follow the research literature in the field. The topics were chosen to represent those areas of bioinorganic chemistry that are mature enough for textbook presentation. Although each chapter presents material...

  18. Organic chemistry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-08-15

    This book with sixteen chapter explains organic chemistry on linkage isomerism such as alkane, cycloalkane, alkene, aromatic compounds, stereo selective isomerization, aromatic compounds, stereo selective isomerization, organic compounds, stereo selective isomerization, organic halogen compound, alcohol, ether, aldehyde and ketone, carboxylic acid, dicarboxylic acid, fat and detergent, amino, carbohydrate, amino acid and protein, nucleotide and nucleic acid and spectroscopy, a polymer and medical chemistry. Each chapter has introduction structure and characteristic and using of organic chemistry.

  19. Social Chemistry

    OpenAIRE

    Lichtfouse, Eric; Schwarzbauer, Jan; Robert, Didier

    2012-01-01

    International audience This article is both an essay to propose social chemistry as a new scientific discipline, and a preface of the book Environmental Chemistry for a Sustainable World. Environmental chemistry is a fast emerging discipline aiming at the understanding the fate of pollutants in ecosystems and at designing novel processes that are safe for ecosystems. Past pollution should be cleaned, future pollution should be predicted and avoided (Lichtfouse et al., 2005a). Such advices ...

  20. Computational chemistry

    OpenAIRE

    Truhlar, Donald G.; McKoy, Vincent

    2000-01-01

    Computational chemistry has come of age. With significant strides in computer hardware and software over the last few decades, computational chemistry has achieved full partnership with theory and experiment as a tool for understanding and predicting the behavior of a broad range of chemical, physical, and biological phenomena. The Nobel Prize award to John Pople and Walter Kohn in 1998 highlighted the importance of these advances in computational chemistry. With massively parallel computers ...

  1. Magnetically applied pressure-shear : a new technique for direct strength measurement at high pressure (final report for LDRD project 117856).

    Energy Technology Data Exchange (ETDEWEB)

    Lamppa, Derek C.; Haill, Thomas A.; Alexander, C. Scott; Asay, James Russell

    2010-09-01

    A new experimental technique to measure material shear strength at high pressures has been developed for use on magneto-hydrodynamic (MHD) drive pulsed power platforms. By applying an external static magnetic field to the sample region, the MHD drive directly induces a shear stress wave in addition to the usual longitudinal stress wave. Strength is probed by passing this shear wave through a sample material where the transmissible shear stress is limited to the sample strength. The magnitude of the transmitted shear wave is measured via a transverse VISAR system from which the sample strength is determined.

  2. Influencing College Chemistry Success through High School Chemistry Teaching

    Science.gov (United States)

    Tai, Robert H.; Sadler, Philip M.; Loehr, John F.

    2006-01-01

    The connection between high school chemistry pedagogical experiences and introductory college chemistry performance has been a topic researched in published science education literature since the 1920s. However, analysis techniques have limited the generalizability of these results. This review discusses the findings of a large-scale,…

  3. Good chemistry

    OpenAIRE

    Petsko, Gregory A

    2004-01-01

    The subject matter in chemistry courses reflects almost nothing of the issues that chemists are interested in. It is important to formulate a set of topics - and a Medical College Admissions Test reflecting them - that would leave chemistry departments no choice but to change their teaching.

  4. Usage of laser techniques and digital aerial coverage as a layer for as-built applied to the LPG pipeline Urucu-Coari right-of-way

    Energy Technology Data Exchange (ETDEWEB)

    Furquim, Antonio J. [ESTEIO Engenharia e Aerolevantamentos S.A, Curitiba, PR (Brazil)

    2009-07-01

    The usage of taking of digital aerial images is a reality worldwide, but in Brazil there is few sensors in use available, which makes recognize the pioneer aspect of the technique. Something similar also occurs with the airborne LASER scanning, whose technique has been applied for more time, used in the obtaining of digital terrain models. The use of digital imaging along with the LASER survey can offer an option for the generation of high quality products in a very fast and efficient way, aiming at numberless applications. Among such applications, the generation of cartographic products for the implantation of pipelines, as well as the as-built drawings of these same rights-of-ways after the implantation can be highlighted. The pipeline sector has been the focus of great investments and keeps on presenting demand for new projects and implantations. That allows to deduce that the speed in the generation of accurate bases for such purpose shall progress towards the continuous development of such aerial survey techniques. This paper presents the application of images and LASER survey to obtain ortho photos of Urucu-Coari liquefied petroleum gas (LPG) pipeline. (author)

  5. Computational Chemistry and Lubrication

    Science.gov (United States)

    Zehe, Michael J.

    1998-01-01

    Members of NASA Lewis Research Center's Tribology and Surface Science Branch are applying high-level computational chemistry techniques to the development of new lubrication systems for space applications and for future advanced aircraft engines. The next generation of gas turbine engines will require a liquid lubricant to function at temperatures in excess of 350 C in oxidizing environments. Conventional hydrocarbon-based lubricants are incapable of operating in these extreme environments, but a class of compounds known as the perfluoropolyether (PFAE) liquids (see the preceding illustration) shows promise for such applications. These commercially available products are already being used as lubricants in conditions where low vapor pressure and chemical stability are crucial, such as in satellite bearings and composite disk platters. At higher temperatures, however, these compounds undergo a decomposition process that is assisted (catalyzed) by metal and metal oxide bearing surfaces. This decomposition process severely limits the applicability of PFAE's at higher temperatures. A great deal of laboratory experimentation has revealed that the extent of fluid degradation depends on the chemical properties of the bearing surface materials. Lubrication engineers would like to understand the chemical breakdown mechanism to design a less vulnerable PFAE or to develop a chemical additive to block this degradation.

  6. Application of green analysis and testing technique in food analytical chemistry%绿色分析测试技术在食品检验中的应用

    Institute of Scientific and Technical Information of China (English)

    王仕兴; 牛华; 张学忠; 杨凡; 彭珍华; 祝红昆; 马雪涛; 李军明

    2012-01-01

    绿色分析技术已成为国际分析化学的前沿科学,是一种新型的分析技术。绿色分析技术要求食品分析和检验者们能够发展绿色的分析方法和技术,从源头上制止污染的产生,减轻食品分析对操作者造成的伤害和对环境造成的污染。无污染或少污染的绿色分析化学技术将是今后食品分析的发展方向。文章重点介绍绿色分析测试技术在食品检验中的应用。%Green analysis and testing technique is a frontier area of analysis science and that is a new analysis technique.Green analysis and testing technique requires developing green analytical methods which eliminate the pollution from headstream and reduce damage and pollution.Free from pollution or little pollution in green analytical chemistry would be the development direction of food analytical chemistry.Its application and research progress in food detection were mainly introduced.

  7. Forensic Chemistry--A Symposium Collection.

    Science.gov (United States)

    Journal of Chemical Education, 1985

    1985-01-01

    Presents a collection of articles to provide chemistry teachers with resource materials to add forensic chemistry units to their chemistry courses. Topics range from development of forensic science laboratory courses and mock-crime scenes to forensic serology and analytical techniques. (JN)

  8. An Advanced Analytical Chemistry Experiment Using Gas Chromatography-Mass Spectrometry, MATLAB, and Chemometrics to Predict Biodiesel Blend Percent Composition

    Science.gov (United States)

    Pierce, Karisa M.; Schale, Stephen P.; Le, Trang M.; Larson, Joel C.

    2011-01-01

    We present a laboratory experiment for an advanced analytical chemistry course where we first focus on the chemometric technique partial least-squares (PLS) analysis applied to one-dimensional (1D) total-ion-current gas chromatography-mass spectrometry (GC-TIC) separations of biodiesel blends. Then, we focus on n-way PLS (n-PLS) applied to…

  9. Computational organometallic chemistry

    International Nuclear Information System (INIS)

    In this article, the author highlights the tremendous impact that density functional theory has had on computational chemistry over the last decade. This robust and efficient theoretical technique (for which John Pople and Walter Kohn were awarded the Nobel Prize in 1998) has opened up many new possibilities for chemists, allowing to study large systems with a degree of reliability hitherto uncontemplated. Examples which illustrate how both density functional theory and hybrid method have been successfully used in solving difficult problems in quantum chemistry of catalysis are briefly discussed

  10. Materials Chemistry

    CERN Document Server

    Fahlman, Bradley D

    2011-01-01

    The 2nd edition of Materials Chemistry builds on the strengths that were recognized by a 2008 Textbook Excellence Award from the Text and Academic Authors Association (TAA). Materials Chemistry addresses inorganic-, organic-, and nano-based materials from a structure vs. property treatment, providing a suitable breadth and depth coverage of the rapidly evolving materials field. The 2nd edition continues to offer innovative coverage and practical perspective throughout. After briefly defining materials chemistry and its history, seven chapters discuss solid-state chemistry, metals, semiconducting materials, organic "soft" materials, nanomaterials, and materials characterization. All chapters have been thoroughly updated and expanded with, for example, new sections on ‘soft lithographic’ patterning, ‘click chemistry’ polymerization, nanotoxicity, graphene, as well as many biomaterials applications. The polymer and ‘soft’ materials chapter represents the largest expansion for the 2nd edition. Each ch...

  11. Introductory Chemistry

    OpenAIRE

    Baron, Mark; Gonzalez-Rodriguez, Jose; Stevens, Gary; Gray, Nathan; Atherton, Thomas; Winn, Joss

    2010-01-01

    Teaching and Learning resources for the 1st Year Introductory Chemistry course (Forensic Science). 30 credits. These are Open Educational Resources (OER), made available for re-use under a Creative Commons license.

  12. Analytical chemistry

    International Nuclear Information System (INIS)

    This book is comprised of nineteen chapters, which describes introduction of analytical chemistry, experimental error and statistics, chemistry equilibrium and solubility, gravimetric analysis with mechanism of precipitation, range and calculation of the result, volume analysis on general principle, sedimentation method on types and titration curve, acid base balance, acid base titration curve, complex and firing reaction, introduction of chemical electro analysis, acid-base titration curve, electrode and potentiometry, electrolysis and conductometry, voltammetry and polarographic spectrophotometry, atomic spectrometry, solvent extraction, chromatograph and experiments.

  13. Green Chemistry

    Energy Technology Data Exchange (ETDEWEB)

    Collison, Melanie

    2011-05-15

    Green chemistry is the science of chemistry used in a way that will not use or create hazardous substances. Dr. Rui Resendes is working in this field at GreenCentre Canada, an offshoot of PARTEQ Innovations in Kingston, Ontario. GreenCentre's preliminary findings suggest their licensed product {sup S}witchable Solutions{sup ,} featuring 3 classes of solvents and a surfactant, may be useful in bitumen oil sands extraction.

  14. Cluster Chemistry

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    @@ Cansisting of eight scientists from the State Key Laboratory of Physical Chemistry of Solid Surfaces and Xiamen University, this creative research group is devoted to the research of cluster chemistry and creation of nanomaterials.After three-year hard work, the group scored a series of encouraging progresses in synthesis of clusters with special structures, including novel fullerenes, fullerene-like metal cluster compounds as well as other related nanomaterials, and their properties study.

  15. Physical chemistry for engineering and applied sciences

    CERN Document Server

    Foulkes, Frank R

    2012-01-01

    THINGS YOU SHOULD KNOW BUT PROBABLY FORGOT Basic Definitions SI Units Dalton's Atomic Theory Stoichiometry Equivalent Weight Amount of Substance: the Mole Avogadro's HypothesisConservation of Mass Conservation of ChargeAtomic Mass Scales STATES OF MATTER AND THE PROPERTIES OF GASES The Three States of Matter Pressure Archimedes' Principle Temperature THE IDEAL GAS The Ideal Gas Equation of State Molar Volumes Combined Gas Equation Dalton's Law of Partial Pressures Mole Fractions Partial Volumes THE KINETIC THEORY OF GASES Postulates Simplified Derivation of the Ideal Gas Law The Meaning of Pre

  16. 分子生物学技术在昆虫系统学上的应用%Molecular Biological Techniques Applied in Insect Systematics

    Institute of Scientific and Technical Information of China (English)

    黄帅; 胡红英

    2006-01-01

    介绍了广泛用于昆虫分类学当中的几种分子生物学技术,包括核酸序列分析技术,RFLP技术,PCR技术和DNA指纹技术等,以及这些技术在线粒体DNA和核糖体DNA等分子标记上的应用.现代生物技术应用于昆虫系统学的研究将会有很好的前景.%Molecular biology plays a very important role in entomotaxomomy, and a new area of entomological science forming as molecular biological techniques are applied in insect systematics. Since its commencement in 1980's, much important progress has been made and many excellent results have been achieved especially in recent years. This paper introduces many kinds of modern biological technology being widely used in study of entomotaxonomy, including nucleic acid sequence analysis, RFLP, PCR, DNAfp, etc. Their applications in some molecular markers, such as mitochondrial DNA (mtDNA) and ribosomal DNA (rDNA), and their combined dataset can be effective to applied in taxonomy and identification of species. This view showed that the insect molecular systematic combined with many kinds of modern biological technology will be one of the most important subjects in the near future.

  17. Gas chromatography/ion trap mass spectrometry applied for the analysis of triazine herbicides in environmental waters by an isotope dilution technique

    International Nuclear Information System (INIS)

    A gas chromatography/ion trap mass spectrometry method was developed for the analysis of simazine, atrazine, cyanazine, as well as the degradation products of atrazine, such as deethylatrazine and deisopropylatrazine in environmental water samples. Isotope dilution technique was applied for the quantitative analysis of atrazine in water at low ng/l levels. One liter of water sample spiked with stable isotope internal standard atrazine-d5 was extracted with a C18 solid-phase extraction cartridge. The analysis was performed on an ion trap mass spectrometer operated in MS/MS method. The extraction recoveries were in the range of 83-94% for the triazine herbicides in water at the concentrations of 24, 200, and 1000 ng/l, while poor recoveries were obtained for the degradation products of atrazine. The relative standard deviation (R.S.D.) were within the range of 3.2-16.1%. The detection limits of the method were between 0.75 and 12 ng/l when 1 l of water was analyzed. The method was successfully applied to analyze environmental water samples collected from a reservoir and a river in Hong Kong for atrazine detected at concentrations between 3.4 and 26 ng/l

  18. Mathematics for physical chemistry

    CERN Document Server

    Mortimer, Robert G

    2005-01-01

    Mathematics for Physical Chemistry, Third Edition, is the ideal text for students and physical chemists who want to sharpen their mathematics skills. It can help prepare the reader for an undergraduate course, serve as a supplementary text for use during a course, or serve as a reference for graduate students and practicing chemists. The text concentrates on applications instead of theory, and, although the emphasis is on physical chemistry, it can also be useful in general chemistry courses. The Third Edition includes new exercises in each chapter that provide practice in a technique immediately after discussion or example and encourage self-study. The first ten chapters are constructed around a sequence of mathematical topics, with a gradual progression into more advanced material. The final chapter discusses mathematical topics needed in the analysis of experimental data.* Numerous examples and problems interspersed throughout the presentations * Each extensive chapter contains a preview, objectives, and ...

  19. 基于导师团队的应用化学专业研究生培养模式的探讨%To explore thetutor team model for postgraduate cultivation of applied chemistry specialty

    Institute of Scientific and Technical Information of China (English)

    许晶; 付颖

    2015-01-01

    The traditional single tutor system training mode of graduate education was still inadequate at present.With its own characteristics of graduate education,built a diversified postgraduate tutor team in applied chemistry specialty.Based on the leading tutor(school)+ vice tutor(internal or external)+ assistant tutor basic pattern,put forword the four kinds of tutor team training mode.Illustrated the superiority of the tutor team training mode.The tutor team training mode could be effective to improvethe quality of graduate education,achieve cross of discipline,and construct tutor team.%针对目前研究生教育采用传统的单导师制度培养模式的不足,结合研究生教育的特点,在应用化学专业构建了多元化的研究生导师团队。提出了以主导师(校内)+副导师(校内或校外)+助理导师为基本模式的4种导师团队培养模式,并阐释了导师团队模式有利于提高研究生培养质量,有利于实现学科的交叉,有利于导师团队队伍建设的优越性。

  20. 基于应用型人才培养的无机化学课程改革%The Curriculum Reform of Inorganic Chemistry Based on the Cultivation of Applied Talents

    Institute of Scientific and Technical Information of China (English)

    徐丽

    2011-01-01

    With the cultivation of applied talents and the requirements of the cultivation plan as the starting points,this paper studies on the reform of the theory and experiment course of inorganic chemistry,aiming to help students effectively grasp the basic knowledge and basic experiment skills and to cultivate students' ability of self-learning,discovering and solving problems,hoping to benefit students learning of the courses followed and the cultivation of scientific research.%从培养应用型人才出发,针对广东药学院医药化工学院专业的特点和培养方案的要求,对无机化学理论和实验课程进行改革的研究。目的是使学生高效率地掌握基础理论知识和基本实验技能,培养学生的自学能力、发现问题及解决问题的能力,便于学生对后续课程的学习及科学研究意识的培养。

  1. Towards Bildung-Oriented Chemistry Education

    Science.gov (United States)

    Sjöström, Jesper

    2013-07-01

    This paper concerns Bildung-oriented chemistry education, based on a reflective and critical discourse of chemistry. It is contrasted with the dominant type of chemistry education, based on the mainstream discourse of chemistry. Bildung-oriented chemistry education includes not only content knowledge in chemistry, but also knowledge about chemistry, both about the nature of chemistry and about its role in society. In 2004 Mahaffy suggested a tetrahedron model based on Johnstone's chemical triangle. The latter represents the formal aspects of chemistry teaching (macro, submicro, and symbolic) and the top of the tetrahedron represents a human element. In the present paper the following subdivision of the top is suggested (starting from the bottom): (1) applied chemistry, (2) socio-cultural context, and (3) critical-philosophic approach. The professional identity of the Bildung-oriented chemistry teacher differs from that of the chemist and is informed by research fields such as Philosophy of Chemistry, Science and Technology Studies, and Environmental Education. He/she takes a socio-critical approach to chemistry, emphasising both the benefits and risks of chemistry and its applications.

  2. Assessment of Coastal and Urban Flooding Hazards Applying Extreme Value Analysis and Multivariate Statistical Techniques: A Case Study in Elwood, Australia

    Science.gov (United States)

    Guimarães Nobre, Gabriela; Arnbjerg-Nielsen, Karsten; Rosbjerg, Dan; Madsen, Henrik

    2016-04-01

    Traditionally, flood risk assessment studies have been carried out from a univariate frequency analysis perspective. However, statistical dependence between hydrological variables, such as extreme rainfall and extreme sea surge, is plausible to exist, since both variables to some extent are driven by common meteorological conditions. Aiming to overcome this limitation, multivariate statistical techniques has the potential to combine different sources of flooding in the investigation. The aim of this study was to apply a range of statistical methodologies for analyzing combined extreme hydrological variables that can lead to coastal and urban flooding. The study area is the Elwood Catchment, which is a highly urbanized catchment located in the city of Port Phillip, Melbourne, Australia. The first part of the investigation dealt with the marginal extreme value distributions. Two approaches to extract extreme value series were applied (Annual Maximum and Partial Duration Series), and different probability distribution functions were fit to the observed sample. Results obtained by using the Generalized Pareto distribution demonstrate the ability of the Pareto family to model the extreme events. Advancing into multivariate extreme value analysis, first an investigation regarding the asymptotic properties of extremal dependence was carried out. As a weak positive asymptotic dependence between the bivariate extreme pairs was found, the Conditional method proposed by Heffernan and Tawn (2004) was chosen. This approach is suitable to model bivariate extreme values, which are relatively unlikely to occur together. The results show that the probability of an extreme sea surge occurring during a one-hour intensity extreme precipitation event (or vice versa) can be twice as great as what would occur when assuming independent events. Therefore, presuming independence between these two variables would result in severe underestimation of the flooding risk in the study area.

  3. Innovative hyperspectral imaging (HSI) based techniques applied to end-of-life concrete drill core characterization for optimal dismantling and materials recovery

    Science.gov (United States)

    Bonifazi, Giuseppe; Picone, Nicoletta; Serranti, Silvia

    2015-02-01

    The reduction of EOL concrete disposal in landfills, together with a lower exploitation of primary raw materials, generates a strong interest to develop, set-up and apply innovative technologies to maximize Construction and Demolition Waste (C&DW) conversion into useful secondary raw materials. Such a goal can be reached starting from a punctual in-situ efficient characterization of the objects to dismantle in order to develop demolition actions aimed to set up innovative mechanical-physical processes to recover the different materials and products to recycle. In this paper an innovative recycling-oriented characterization strategy based on HyperSpectral Imaging (HSI) is described in order to identify aggregates and mortar in drill core samples from end-of-life concrete. To reach this goal, concrete drill cores from a demolition site were systematically investigated by HSI in the short wave infrared field (1000-2500 nm). Results obtained by the adoption of the HSI approach showed as this technology can be successfully applied to analyze quality and characteristics of C&DW before dismantling and as final product to reutilise after demolition-milling-classification actions. The proposed technique and the related recognition logics, through the spectral signature detection of finite physical domains (i.e. concrete slice and/or particle) of different nature and composition, allows; i) to develop characterization procedures able to quantitatively assess end-of-life concrete compositional/textural characteristics and ii) to set up innovative sorting strategies to qualify the different materials constituting drill core samples.

  4. Polymer Chemistry

    Science.gov (United States)

    Williams, Martha; Roberson, Luke; Caraccio, Anne

    2010-01-01

    This viewgraph presentation describes new technologies in polymer and material chemistry that benefits NASA programs and missions. The topics include: 1) What are Polymers?; 2) History of Polymer Chemistry; 3) Composites/Materials Development at KSC; 4) Why Wiring; 5) Next Generation Wiring Materials; 6) Wire System Materials and Integration; 7) Self-Healing Wire Repair; 8) Smart Wiring Summary; 9) Fire and Polymers; 10) Aerogel Technology; 11) Aerogel Composites; 12) Aerogels for Oil Remediation; 13) KSC's Solution; 14) Chemochromic Hydrogen Sensors; 15) STS-130 and 131 Operations; 16) HyperPigment; 17) Antimicrobial Materials; 18) Conductive Inks Formulations for Multiple Applications; and 19) Testing and Processing Equipment.

  5. Assessment and remediation of a historical pipeline release : tools, techniques and technologies applied to in-situ/ex-situ soil and groundwater remediation

    Energy Technology Data Exchange (ETDEWEB)

    Reid, N. [EBA Engineering Consultants Ltd., Calgary, AB (Canada); Kohlsmith, B. [Kinder Morgan Canada Inc., Calgary, AB (Canada)

    2008-07-01

    Tools, techniques, and technologies applied to in-situ/ex-situ soil and groundwater remediation were presented as part of an assessment and remediation of a historical pipeline release. The presentation discussed the initial assessment, as well as a discussion of remediation of hydrophobic soils, re-assessment, site specific criteria, a remediation trial involving bioventing and chemical oxidation, and a full scale remediation. The pipeline release occurred in the summer of 1977. The event was followed by a complete surface remediation with a significant amount of topsoil being removed and replaced. In 2004, a landowner complained of poor crop growth in four patches near the area of the historical spill. An initial assessment was undertaken and several photographs were presented. It was concluded that a comprehensive assessment set the base for a careful staged approach to the remediation of the site including the establishment of site specific criteria. The process was made possible with a high level of communication between all stakeholders. In addition, the most appropriate solution for the site was realized. figs.

  6. Identification of Mangrove Areas by Remote Sensing: The ROC Curve Technique Applied to the Northwestern Mexico Coastal Zone Using Landsat Imagery

    Directory of Open Access Journals (Sweden)

    Salvador Sánchez-Carrillo

    2011-07-01

    Full Text Available In remote sensing, traditional methodologies for image classification consider the spectral values of a pixel in different image bands. More recently, classification methods have used neighboring pixels to provide more information. In the present study, we used these more advanced techniques to discriminate between mangrove and non‑mangrove regions in the Gulf of California of northwestern Mexico. A maximum likelihood algorithm was used to obtain a spectral distance map of the vegetation signature characteristic of mangrove areas. Receiver operating characteristic (ROC curve analysis was applied to this map to improve classification. Two classification thresholds were set to determine mangrove and non-mangrove areas, and two performance statistics (sensitivity and specificity were calculated to express the uncertainty (errors of omission and commission associated with the two maps. The surface area of the mangrove category obtained by maximum likelihood classification was slightly higher than that obtained from the land cover map generated by the ROC curve, but with the difference of these areas to have a high level of accuracy in the prediction of the model. This suggests a considerable degree of uncertainty in the spectral signatures of pixels that distinguish mangrove forest from other land cover categories.

  7. 40 CFR 158.310 - Product chemistry data requirements table.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Product chemistry data requirements...) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Product Chemistry § 158.310 Product chemistry data... the product chemistry data requirements for a particular pesticide product. Notes that apply to...

  8. Peer Mentoring in the General Chemistry and Organic Chemistry Laboratories. The Pinacol Rearrangement: An Exercise in NMR and IR Spectroscopy for General Chemistry and Organic Chemistry Laboratories

    Science.gov (United States)

    Arrington, Caleb A.; Hill, Jameica B.; Radfar, Ramin; Whisnant, David M.; Bass, Charles G.

    2008-02-01

    This article describes a discovery experiment for general chemistry and organic chemistry labs. Although the pinacol rearrangement has been employed in undergraduate organic laboratories before, in this application organic chemistry students act as mentors to students of general chemistry. Students work together using distillation—a new technique for the general chemistry students and a basic one for the organic students—to isolate an unknown compound. Then, using spectroscopy (IR and NMR), the students collaborate to determine the structure of the product of the reaction. This application of a standard experiment allows general chemistry students to gain exposure to modern spectroscopic instrumentation and to enhance their problem-solving skills. Organic chemistry students improve their understandings of laboratory techniques and spectroscopic interpretation by acting as the resident experts for the team.

  9. New trends and developments in radiation chemistry

    International Nuclear Information System (INIS)

    Radiation chemistry is a branch of chemistry that studies chemical transformations in materials exposed to high-energy radiations. It uses radiation as the initiator of chemical reactions. Practical applications of radiation chemistry today extend to many fields, including health care, food and agriculture, manufacturing, industrial pollution abatement, biotechnology and telecommunications. The important advantage of radiation chemistry lies in its ability to be used to produce, and study, almost any reactive atomic and molecular species playing a part in chemical reactions, synthesis, industrial processes, or in biological systems. The techniques are applicable to gaseous, liquid, solid, and heterogeneous systems. By combining different techniques of radiation chemistry with analytical chemistry, the reaction mechanism and kinetics of chemical reactions are studied. In November 1988 in Bologna, Italy, the IAEA convened an advisory group meeting to assess new trends and developments in radiation chemistry. The present publication includes most of the contributions presented at the meeting. Refs, figs and tabs

  10. Metalloporphyrins as Oxidation Catalysts: Moving toward "Greener" Chemistry in the Inorganic Chemistry Laboratory

    Science.gov (United States)

    Clark, Rose A.; Stock, Anne E.; Zovinka, Edward P.

    2012-01-01

    Training future chemists to be aware of the environmental impact of their work is of fundamental importance to global society. To convince chemists to embrace sustainability, the integration of green chemistry across the entire chemistry curriculum is a necessary step. This experiment expands the reach of green chemistry techniques into the…

  11. Radioanalytical chemistry in Denmark

    International Nuclear Information System (INIS)

    Publications from Denmark in the field of radioanalytical chemistry are presented in 2 groups, one involving neutron activation and similar techniques, and one for other radioanalytical work. Altogether 258 references including books are given for the period 1936-1977, and the overall doubling time is 5.2 years. A significant deviation from a purely exponential growth was caused by the Second World War. (author)

  12. Chemistry in Bioinformatics

    OpenAIRE

    Mitchell John; Murray-Rust Peter; Rzepa Henry

    2005-01-01

    Abstract Chemical information is now seen as critical for most areas of life sciences. But unlike Bioinformatics, where data is openly available and freely re-usable, most chemical information is closed and cannot be re-distributed without permission. This has led to a failure to adopt modern informatics and software techniques and therefore paucity of chemistry in bioinformatics. New technology, however, offers the hope of making chemical data (compounds and properties) free during the auth...

  13. Reinventing Chemistry

    OpenAIRE

    Whitesides, George McClelland

    2015-01-01

    Chemistry is in a period of change, from an era focused on molecules and reactions, to one in which manipulations of systems of molecules and reactions will be essential parts of controlling larger systems. This Essay traces paths from the past to possible futures.

  14. Mass spectrometry. [in organic chemistry

    Science.gov (United States)

    Burlingame, A. L.; Shackleton, C. H. L.; Howe, I.; Chizhov, O. S.

    1978-01-01

    A review of mass spectrometry in organic chemistry is given, dealing with advances in instrumentation and computer techniques, selected topics in gas-phase ion chemistry, and applications in such fields as biomedicine, natural-product studies, and environmental pollution analysis. Innovative techniques and instrumentation are discussed, along with chromatographic-mass spectrometric on-line computer techniques, mass spectral interpretation and management techniques, and such topics in gas-phase ion chemistry as electron-impact ionization and decomposition, photoionization, field ionization and desorption, high-pressure mass spectrometry, ion cyclotron resonance, and isomerization reactions of organic ions. Applications of mass spectrometry are examined with respect to bio-oligomers and their constituents, biomedically important substances, microbiology, environmental organic analysis, and organic geochemistry.

  15. Extraction of toxic and valuable metals from wastewater sludge and ash arising from RECICLAGUA, a treatment plant for residual waters applying the leaching technique

    International Nuclear Information System (INIS)

    Presently work, the technique is applied of having leached using coupled thermostatted columns, the X-ray diffraction for the identification of the atomic and molecular structure of the metals toxic that are present in the residual muds of a treatment plant of water located in the municipality of the Estado de Mexico, RECICLAGUA, likewise the techniques is used of Inductively Coupled Plasma Mass Spectroscopy and X-ray fluorescence analysis for the qualitative analysis. We took samples of residual sludge and incinerated ash of a treatment plant waste water from the industrial corridor Toluca-Lerma RECICLAGUA, located in Lerma, Estado de Mexico. For this study 100 g. of residual of sludge mixed with a solution to 10% of mineral acid or sodium hydroxide according to the case, to adjust the one p H at 2, 5, 7 and 10, bisulfite was added, of 0.3-1.5 g of dodecyl sulfate of sodium and 3.93 g of DTPA (triple V). Diethylene triamine penta acetate. These sludges and ashes were extracted from toxic and valuable metals by means of the leaching technique using coupled thermostated columns that which were designed by Dr. Jaime Vite Torres, it is necessary to make mention that so much the process as the apparatus with those that one worked was patented by him same. With the extraction of these metals, benefits are obtained, mainly of economic type, achieving the decrease of the volume of those wastes that have been generated; as well as the so much use of those residuals, once the metals have been eliminated, as of those residuals, once the metals have been eliminated, as of those liquors, the heavy metals were extracted. It was carried out a quantitative analysis using Icp mass spectroscopy, this way to be able to know the one content of the present metals in the samples before and after of leaching them, these results reported a great quantity of elements. Another of the techniques employees was the analysis by X-ray diffraction that provides an elementary content of the

  16. Nonthermal plasma chemistry and physics

    CERN Document Server

    Meichsner, Jurgen; Schneider, Ralf; Wagner, Hans-Erich

    2013-01-01

    In addition to introducing the basics of plasma physics, Nonthermal Plasma Chemistry and Physics is a comprehensive presentation of recent developments in the rapidly growing field of nonthermal plasma chemistry. The book offers a detailed discussion of the fundamentals of plasma chemical reactions and modeling, nonthermal plasma sources, relevant diagnostic techniques, and selected applications.Elucidating interconnections and trends, the book focuses on basic principles and illustrations across a broad field of applications. Expert contributors address environmental aspects of plasma chemist

  17. Global Free Tropospheric NO2 Abundances Derived Using a Cloud Slicing Technique Applied to Satellite Observations from the Aura Ozone Monitoring Instrument (OMI)

    Science.gov (United States)

    Choi, S.; Joiner, J.; Choi, Y.; Duncan, B. N.; Bucsela, E.

    2014-01-01

    We derive free-tropospheric NO2 volume mixing ratios (VMRs) and stratospheric column amounts of NO2 by applying a cloud slicing technique to data from the Ozone Monitoring Instrument (OMI) on the Aura satellite. In the cloud-slicing approach, the slope of the above-cloud NO2 column versus the cloud scene pressure is proportional to the NO2 VMR. In this work, we use a sample of nearby OMI pixel data from a single orbit for the linear fit. The OMI data include cloud scene pressures from the rotational-Raman algorithm and above-cloud NO2 vertical column density (VCD) (defined as the NO2 column from the cloud scene pressure to the top-of-the-atmosphere) from a differential optical absorption spectroscopy (DOAS) algorithm. Estimates of stratospheric column NO2 are obtained by extrapolating the linear fits to the tropopause. We compare OMI-derived NO2 VMRs with in situ aircraft profiles measured during the NASA Intercontinental Chemical Transport Experiment Phase B (INTEX-B) campaign in 2006. The agreement is generally within the estimated uncertainties when appropriate data screening is applied. We then derive a global seasonal climatology of free-tropospheric NO2 VMR in cloudy conditions. Enhanced NO2 in the free troposphere commonly appears near polluted urban locations where NO2 produced in the boundary layer may be transported vertically out of the boundary layer and then horizontally away from the source. Signatures of lightning NO2 are also shown throughout low and middle latitude regions in summer months. A profile analysis of our cloud slicing data indicates signatures of uplifted and transported anthropogenic NO2 in the middle troposphere as well as lightning-generated NO2 in the upper troposphere. Comparison of the climatology with simulations from the Global Modeling Initiative (GMI) for cloudy conditions (cloud optical thicknesses > 10) shows similarities in the spatial patterns of continental pollution outflow. However, there are also some differences in

  18. Global free tropospheric NO2 abundances derived using a cloud slicing technique applied to satellite observations from the Aura Ozone Monitoring Instrument (OMI

    Directory of Open Access Journals (Sweden)

    S. Choi

    2014-01-01

    Full Text Available We derive free-tropospheric NO2 volume mixing ratios (VMRs and stratospheric column amounts of NO2 by applying a cloud slicing technique to data from the Ozone Monitoring Instrument (OMI on the Aura satellite. In the cloud-slicing approach, the slope of the above-cloud NO2 column vs. the cloud scene pressure is proportional to the NO2 VMR. In this work, we use a sample of nearby OMI pixel data from a single orbit for the linear fit. The OMI data include cloud scene pressures from the rotational-Raman algorithm and above-cloud NO2 vertical column density (VCD (defined as the NO2 column from the cloud scene pressure to the top-of-the-atmosphere from a differential optical absorption spectroscopy (DOAS algorithm. Estimates of stratospheric column NO2 are obtained by extrapolating the linear fits to the tropopause. We compare OMI-derived NO2 VMRs with in situ aircraft profiles measured during the NASA Intercontinental Chemical Transport Experiment Phase B (INTEX-B campaign in 2006. The agreement is generally within the estimated uncertainties when appropriate data screening is applied. We then derive a global seasonal climatology of free-tropospheric NO2 VMR in cloudy conditions. Enhanced NO2 in the free troposphere commonly appears near polluted urban locations where NO2 produced in the boundary layer may be transported vertically out of the boundary layer and then horizontally away from the source. Signatures of lightning NO2 are also shown throughout low and middle latitude regions in summer months. A profile analysis of our cloud slicing data indicates signatures of uplifted and transported anthropogenic NO2 in the middle troposphere as well as lightning-generated NO2 in the upper troposphere. Comparison of the climatology with simulations from the Global Modeling Initiative (GMI for cloudy conditions (cloud optical thicknesses > 10 shows similarities in the spatial patterns of continental pollution outflow. However, there are also some

  19. Parallel chemistry in the 21st century.

    Science.gov (United States)

    Long, Alan

    2012-09-01

    The tool chest of techniques, methodologies, and equipment for conducting parallel chemistry is larger than ever before. Improvements in the laboratory and developments in computational chemistry have enabled compound library design at the desks of medicinal chemists. This unit includes a brief background in combinatorial/parallel synthesis chemistry, along with a discussion of evolving technologies for both solid- and solution-phase chemistry. In addition, there are discussions on designing compound libraries, acquisition/procurement of compounds and/or reagents, the chemistry and equipment used for chemical production, purification, sample handling, and data analysis.

  20. Philosophy of Mathematical Chemistry: A Personal Perspective

    Directory of Open Access Journals (Sweden)

    Subhash C. Basak

    2013-07-01

    Full Text Available This article discusses the nature of mathematical chemistry, discrete mathematical chemistry in particular. Molecules and macromolecules can be represented by model objects using methods of discrete mathematics, e.g., graphs and matrices. Mathematical formalisms are further applied on the model objects to distill various quantitative characteristics. The end product of such an exercise can be a better understanding of chemistry, the development of quantitative scales for qualitative notions of chemistry, or an illumination of the structural basis of chemical and biological properties. The aforementioned aspects of mathematical chemistry are discussed based on my own practitioner’s perspective.

  1. Development of a computational system for radiotherapic planning with the IMRT technique applied to the MCNP computer code with 3D graphic interface for voxel models

    International Nuclear Information System (INIS)

    The Intensity Modulated Radiation Therapy - IMRT is an advanced treatment technique used worldwide in oncology medicine branch. On this master proposal was developed a software package for simulating the IMRT protocol, namely SOFT-RT which attachment the research group 'Nucleo de Radiacoes Ionizantes' - NRI at UFMG. The computational system SOFT-RT allows producing the absorbed dose simulation of the radiotherapic treatment through a three-dimensional voxel model of the patient. The SISCODES code, from NRI, research group, helps in producing the voxel model of the interest region from a set of CT or MRI digitalized images. The SOFT-RT allows also the rotation and translation of the model about the coordinate system axis for better visualization of the model and the beam. The SOFT-RT collects and exports the necessary parameters to MCNP code which will carry out the nuclear radiation transport towards the tumor and adjacent healthy tissues for each orientation and position of the beam planning. Through three-dimensional visualization of voxel model of a patient, it is possible to focus on a tumoral region preserving the whole tissues around them. It takes in account where exactly the radiation beam passes through, which tissues are affected and how much dose is applied in both tissues. The Out-module from SOFT-RT imports the results and express the dose response superimposing dose and voxel model in gray scale in a three-dimensional graphic representation. The present master thesis presents the new computational system of radiotherapic treatment - SOFT-RT code which has been developed using the robust and multi-platform C++ programming language with the OpenGL graphics packages. The Linux operational system was adopted with the goal of running it in an open source platform and free access. Preliminary simulation results for a cerebral tumor case will be reported as well as some dosimetric evaluations. (author)

  2. MIPPO技术治疗有楔形骨块的锁骨干骨折%Applying MIPPO technique to treat clavicle shaft fractures with wedge fracture fragment

    Institute of Scientific and Technical Information of China (English)

    杨明; 司徒炫明; 张殿英; 王天兵; 付中国; 张培训; 陈建海; 姜保国

    2016-01-01

    fracture with wedge-shaped fragments were treated by close reduction and MIPPO (minimal invasive percutaneous plate osteosynthesis)technique with three incisions.We performed this retrospective study to explore the operation methods and treatment effects of the midshaft clavicular fractures with wedge-shaped fragments using MIPPO technique.A group of 29 patients treated by conventional open reduction and internal fixation techniques,from March 2007 to November 2011,were also performed study as control group with complete follow-up data.Methods (1 )General information:All the cases were selected from the patients who were treated in our department from March 2007 to April 2014.Among them,26 patients were treated with three-incision MIPPO bridging technique,and 29 patients were treated with conventional open reduction,lag screw fixation for fragments and neutralization or compression plate fixation.The mechanisms of injury were mainly fall damage.The two groups respectively had 2 cases of falling injury from height and 1 case with multiple fractures.According to Robinson classification,the fracture types were classified as follows:II B1 type was defined as the midshaft clavicular fracture with displacement and 1 wedged-shape fragment in the fracture site;IIB2 type was defined as the fracture with 2 or more free fragments in the facture site.The gender,age,dominant side,time from injury to operation and fracture type can be seen in table 1.(2)Operation methods:MIPPO group:Patients were on beach chair position under general anesthesia which had good muscular relaxation. The posterolateral side of the affected shoulder,upper arm and forearm were disinfected to guarantee that the surgeon can adequately move the shoulder during operation.The upward tilt tip of the proximal clavicular main fragment was obviously be palpated.A 2 cm incision was applied to expose the tip of the proximal fragments without periosteal dissection.A double-tip intramedullary K-wire with a diameter of 2

  3. Forensic Chemistry Training

    Directory of Open Access Journals (Sweden)

    Zuhal GERÇEK

    2012-01-01

    Full Text Available Increasing the types of terrorism and crime nowadays, the importance of the forensic sciences can be bett er understood. Forensic science is the application of the wide spectrum of science to answer the question of legal system. It contains the application of the principles, techniques and methods of basic sciences and its main aim is the determination of the physical facts which are important in legal situations. Forensic chemistry is the branch of chemistry which performs the chemical analysis of evidences that used in the courts. Forensic chemist is the professional chemist who analyzes the evidences from crime scene and reaches a result by application of tests. Th us, they have to have a special education. In forensic laboratories candidates who have chemistry/biochemistry undergraduate degree and took biology and forensic chemistry lectures are preferred. It is necessary to design graduate and undergraduate education to train a forensic chemist. Science education should be at the core of the undergraduate education. In addition to this strong laboratory education on both science and forensic science should be given. Th e graduate program of forensic science example should contain forensic science subjects, strong academic lectures on special subjects and research and laboratory components.

  4. Handbook of Applied Solid State Spectroscopy

    CERN Document Server

    Vij, D. R

    2006-01-01

    Solid-State spectroscopy is a burgeoning field with applications in many branches of science, including physics, chemistry, biosciences, surface science, and materials science. Handbook of Applied Solid-State Spectroscopy brings together in one volume information about various spectroscopic techniques that is currently scattered in the literature of these disciplines. This concise yet comprehensive volume covers theory and applications of a broad range of spectroscopies, including NMR, NQR, EPR/ESR, ENDOR, scanning tunneling, acoustic resonance, FTIR, auger electron emission, x-ray photoelectron emission, luminescence, and optical polarization, and more. Emphasis is placed on fundamentals and current methods and procedures, together with the latest applications and developments in the field.

  5. Disk Chemistry*

    OpenAIRE

    Thi Wing-Fai

    2015-01-01

    The chemical species in protoplanetary disks react with each other. The chemical species control part of the thermal balance in those disks. How the chemistry proceeds in the varied conditions encountered in disks relies on detailed microscopic understanding of the reactions through experiments or theoretical studies. This chapter strives to summarize and explain in simple terms the different types of chemical reactions that can lead to complex species. The first part of the chapter deals wit...

  6. Interstellar chemistry

    OpenAIRE

    Klemperer, William

    2006-01-01

    In the past half century, radioastronomy has changed our perception and understanding of the universe. In this issue of PNAS, the molecular chemistry directly observed within the galaxy is discussed. For the most part, the description of the molecular transformations requires specific kinetic schemes rather than chemical thermodynamics. Ionization of the very abundant molecular hydrogen and atomic helium followed by their secondary reactions is discussed. The rich variety of organic species o...

  7. Computational chemistry

    Science.gov (United States)

    Arnold, J. O.

    1987-01-01

    With the advent of supercomputers, modern computational chemistry algorithms and codes, a powerful tool was created to help fill NASA's continuing need for information on the properties of matter in hostile or unusual environments. Computational resources provided under the National Aerodynamics Simulator (NAS) program were a cornerstone for recent advancements in this field. Properties of gases, materials, and their interactions can be determined from solutions of the governing equations. In the case of gases, for example, radiative transition probabilites per particle, bond-dissociation energies, and rates of simple chemical reactions can be determined computationally as reliably as from experiment. The data are proving to be quite valuable in providing inputs to real-gas flow simulation codes used to compute aerothermodynamic loads on NASA's aeroassist orbital transfer vehicles and a host of problems related to the National Aerospace Plane Program. Although more approximate, similar solutions can be obtained for ensembles of atoms simulating small particles of materials with and without the presence of gases. Computational chemistry has application in studying catalysis, properties of polymers, all of interest to various NASA missions, including those previously mentioned. In addition to discussing these applications of computational chemistry within NASA, the governing equations and the need for supercomputers for their solution is outlined.

  8. Analytical Chemistry Laboratory. Progress report for FY 1996

    Energy Technology Data Exchange (ETDEWEB)

    Green, D.W.; Boparai, A.S.; Bowers, D.L.

    1996-12-01

    The purpose of this report is to summarize the activities of the Analytical Chemistry Laboratory (ACL) at Argonne National Laboratory (ANL) for Fiscal Year (FY) 1996. This annual report is the thirteenth for the ACL. It describes effort on continuing and new projects and contributions of the ACL staff to various programs at ANL. The ACL operates in the ANL system as a full-cost-recovery service center, but has a mission that includes a complementary research and development component: The Analytical Chemistry Laboratory will provide high-quality, cost-effective chemical analysis and related technical support to solve research problems of our clients -- Argonne National Laboratory, the Department of Energy, and others -- and will conduct world-class research and development in analytical chemistry and its applications. Because of the diversity of research and development work at ANL, the ACL handles a wide range of analytical chemistry problems. Some routine or standard analyses are done, but the ACL usually works with commercial laboratories if our clients require high-volume, production-type analyses. It is common for ANL programs to generate unique problems that require significant development of methods and adaption of techniques to obtain useful analytical data. Thus, much of the support work done by the ACL is very similar to our applied analytical chemistry research.

  9. The Chemical Core of Chemistry I: A Conceptual Approach

    OpenAIRE

    Joachim Schummer

    1998-01-01

    Given the rich diversity of research fields usually ascribed to chemistry in a broad sense, the present paper tries to dig our characteristic parts of chemistry that can be conceptually distinguished from interdisciplinary, applied, and specialized subfields of chemistry, and that may be called chemistry in a very narrow sense, or 'the chemical core of chemistry'. Unlike historical, ontological, and 'anti-reductive' approaches, I use a conceptual approach together with some methodological imp...

  10. Think for yourself : a writing- based chemistry curriculum

    OpenAIRE

    Morgan, John Andrew

    2011-01-01

    Colleges and universities require applicants to have completed chemistry because students develop scientific literacy and critical thinking skills by learning and applying chemistry content. Due to the factual nature of standards assessments, chemistry curriculum is focused on student memorization of facts. As a result, many high school chemistry students are learning chemistry test facts rather than critical thinking skills. Students at Orange County high school, in southern California, part...

  11. Heterogeneous atmospheric chemistry

    Science.gov (United States)

    Schryer, D. R.

    1982-01-01

    The present conference on heterogeneous atmospheric chemistry considers such topics concerning clusters, particles and microparticles as common problems in nucleation and growth, chemical kinetics, and catalysis, chemical reactions with aerosols, electron beam studies of natural and anthropogenic microparticles, and structural studies employing molecular beam techniques, as well as such gas-solid interaction topics as photoassisted reactions, catalyzed photolysis, and heterogeneous catalysis. Also discussed are sulfur dioxide absorption, oxidation, and oxidation inhibition in falling drops, sulfur dioxide/water equilibria, the evidence for heterogeneous catalysis in the atmosphere, the importance of heterogeneous processes to tropospheric chemistry, soot-catalyzed atmospheric reactions, and the concentrations and mechanisms of formation of sulfate in the atmospheric boundary layer.

  12. Theoretical chemistry periodicities in chemistry and biology

    CERN Document Server

    Eyring, Henry

    1978-01-01

    Theoretical Chemistry: Periodicities in Chemistry and Biology, Volume 4 covers the aspects of theoretical chemistry. The book discusses the stably rotating patterns of reaction and diffusion; the chemistry of inorganic systems exhibiting nonmonotonic behavior; and population cycles. The text also describes the mathematical modeling of excitable media in neurobiology and chemistry; oscillating enzyme reactions; and oscillatory properties and excitability of the heart cell membrane. Selected topics from the theory of physico-chemical instabilities are also encompassed. Chemists, mechanical engin

  13. Mathematical methods for physical and analytical chemistry

    CERN Document Server

    Goodson, David Z

    2011-01-01

    Mathematical Methods for Physical and Analytical Chemistry presents mathematical and statistical methods to students of chemistry at the intermediate, post-calculus level. The content includes a review of general calculus; a review of numerical techniques often omitted from calculus courses, such as cubic splines and Newton's method; a detailed treatment of statistical methods for experimental data analysis; complex numbers; extrapolation; linear algebra; and differential equations. With numerous example problems and helpful anecdotes, this text gives chemistry students the mathematical

  14. Statistical Automatic Summarization in Organic Chemistry

    OpenAIRE

    Boudin, Florian; Velazquez-Morales, Patricia; Torres-Moreno, Juan-Manuel

    2009-01-01

    We present an oriented numerical summarizer algorithm, applied to producing automatic summaries of scientific documents in Organic Chemistry. We present its implementation named Yachs (Yet Another Chemistry Summarizer) that combines a specific document pre-processing with a sentence scoring method relying on the statistical properties of documents. We show that Yachs achieves the best results among several other summarizers on a corpus of Organic Chemistry articles.

  15. Physical Chemistry Chemical Kinetics and Reaction Mechanism

    CERN Document Server

    Trimm, Harold H

    2011-01-01

    Physical chemistry covers diverse topics, from biochemistry to materials properties to the development of quantum computers. Physical chemistry applies physics and math to problems that interest chemists, biologists, and engineers. Physical chemists use theoretical constructs and mathematical computations to understand chemical properties and describe the behavior of molecular and condensed matter. Their work involves manipulations of data as well as materials. Physical chemistry entails extensive work with sophisticated instrumentation and equipment as well as state-of-the-art computers. This

  16. Medicinal electrochemistry: integration of electrochemistry, medicinal chemistry and computational chemistry.

    Science.gov (United States)

    Almeida, M O; Maltarollo, V G; de Toledo, R A; Shim, H; Santos, M C; Honorio, K M

    2014-01-01

    Over the last centuries, there were many important discoveries in medicine that were crucial for gaining a better understanding of several physiological processes. Molecular modelling techniques are powerful tools that have been successfully used to analyse and interface medicinal chemistry studies with electrochemical experimental results. This special combination can help to comprehend medicinal chemistry problems, such as predicting biological activity and understanding drug action mechanisms. Electrochemistry has provided better comprehension of biological reactions and, as a result of many technological improvements, the combination of electrochemical techniques and biosensors has become an appealing choice for pharmaceutical and biomedical analyses. Therefore, this review will briefly outline the present scope and future advances related to the integration of electrochemical and medicinal chemistry approaches based on various applications from recent studies. PMID:24533810

  17. Chemistry for preserving the global environment. Part 5. Offensive odor; its present condition and control technique; Kankyo sozai no kagaku. 5. Akushu no genjo to taisaku gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Saiki, Y.

    1996-07-01

    Offensive odor substances belongs to a quite different field from the perfume inspire of the same sense of smell, and is a substance forming a lot of troubles which is formed in intimate resident environments such as manufacturing factories of the chemicals, incineration and decomposition treatment process of living body relating substances, stock raising facilities, restaurants and others. A material called the offensive odor substance is generally in very low concentration in the atmosphere, most of which is ppm order in its detection limit. And, the offensive odor intensity is proportional to logarithm of its concentration. For example, even removing 99.9% of the offensive odor substance from its forming source, there is remained its difficult countermeasuring problem of no removing as its offensive odor. At present, the offensive odor is severely regulated by means of laws and acts, research on its relating field is active, and its relating publications have become plenty. In this paper, outline on recent state of the offensive odor and its measuring technique was summarized. 14 refs., 6 figs., 8 tabs.

  18. Nuclear Chemistry and Services

    Energy Technology Data Exchange (ETDEWEB)

    Vandevelde, L

    2002-04-01

    The objectives, the programme, and the achievements of R and D at the Belgian Nuclear Research Centre SCK-CEN in the field of nuclear chemistry and analytical techniques are summarized. Major achievement in 2001 included the completion of a project on the measurement of critical radionuclides in reactor waste fluxes (the ARIANE project), the radiochemical characterisation of beryllium material originating from the second matrix of the BR2 reactor as well as to a the organisation of a workshop on the analysis of thorium and its isotopes in workplace materials.

  19. Cyclodextrin chemistry

    International Nuclear Information System (INIS)

    The chemistry of cyclodextrins was studied. This study included synthesising some cyclodextrin derivatives, preparing selected inclusion complexes with cyclodextrin and investigating the effects of gamma irradiation on cyclodextrins and certain linear oligosaccharides. This report presents a brief review of the structure and properties of cyclodextrins, the synthesis of cyclodextrin derivatives, their complexation and applications. This is followed by a description of the synthesis of some cyclodextrin derivatives and the preparation of inclusion complexes of cyclodextrin with some organic compounds. Finally, the effects of gamma irradiation on cyclodextrins, some of their derivatives and certain structurally related carbohydrates are discussed. The gamma irradiation studies were carried out for two reasons: to study the effects of gamma irradiation on cyclodextrins and their derivatives; and to investigate selectivity during the gamma irradiation of cyclodextrin derivatives

  20. Combustion chemistry

    Energy Technology Data Exchange (ETDEWEB)

    Brown, N.J. [Lawrence Berkeley Laboratory, CA (United States)

    1993-12-01

    This research is concerned with the development and use of sensitivity analysis tools to probe the response of dependent variables to model input variables. Sensitivity analysis is important at all levels of combustion modeling. This group`s research continues to be focused on elucidating the interrelationship between features in the underlying potential energy surface (obtained from ab initio quantum chemistry calculations) and their responses in the quantum dynamics, e.g., reactive transition probabilities, cross sections, and thermal rate coefficients. The goals of this research are: (i) to provide feedback information to quantum chemists in their potential surface refinement efforts, and (ii) to gain a better understanding of how various regions in the potential influence the dynamics. These investigations are carried out with the methodology of quantum functional sensitivity analysis (QFSA).

  1. Applied mathematics

    International Nuclear Information System (INIS)

    The 1988 progress report of the Applied Mathematics center (Polytechnic School, France), is presented. The research fields of the Center are the scientific calculus, the probabilities and statistics and the video image synthesis. The research topics developed are: the analysis of numerical methods, the mathematical analysis of the physics and mechanics fundamental models, the numerical solution of complex models related to the industrial problems, the stochastic calculus and the brownian movement, the stochastic partial differential equations, the identification of the adaptive filtering parameters, the discrete element systems, statistics, the stochastic control and the development, the image synthesis techniques for education and research programs. The published papers, the congress communications and the thesis are listed

  2. Applied geodesy

    International Nuclear Information System (INIS)

    This volume is based on the proceedings of the CERN Accelerator School's course on Applied Geodesy for Particle Accelerators held in April 1986. The purpose was to record and disseminate the knowledge gained in recent years on the geodesy of accelerators and other large systems. The latest methods for positioning equipment to sub-millimetric accuracy in deep underground tunnels several tens of kilometers long are described, as well as such sophisticated techniques as the Navstar Global Positioning System and the Terrameter. Automation of better known instruments such as the gyroscope and Distinvar is also treated along with the highly evolved treatment of components in a modern accelerator. Use of the methods described can be of great benefit in many areas of research and industrial geodesy such as surveying, nautical and aeronautical engineering, astronomical radio-interferometry, metrology of large components, deformation studies, etc

  3. Application of Imaging Techniques to Mechanics of Materials and Structures, Volume 4 : Proceedings of the 2010 Annual Conference on Experimental and Applied Mechanics

    CERN Document Server

    2013-01-01

    This the fourth volume of six from the Annual Conference of the Society for Experimental Mechanics, 2010, brings together 58 chapters on Application of Imaging Techniques to Mechanics of Materials and Structure. It presents findings from experimental and computational investigations involving a range of imaging techniques including Recovery of 3D Stress Intensity Factors From Surface Full-field Measurements, Identification of Cohesive-zone Laws From Crack-tip Deformation Fields, Application of High Speed Digital Image Correlation for Vibration Mode Shape Analysis, Characterization of Aluminum Alloys Using a 3D Full Field Measurement, and Low Strain Rate Measurements on Explosives Using DIC.

  4. Computational chemistry for nuclear waste characterization and processing. Relativistic quantum chemistry of actinides

    International Nuclear Information System (INIS)

    This paper describes some of the motivations and accomplishments of our grand challenge project of the same title and focuses upon the activities at Pacific Northwest National Laboratory. The United States Department of Energy (DOE) funded the project, which finishes this fiscal year. Its objectives were to develop and apply the methods of relativistic quantum chemistry to assists in the understanding and prediction of the chemistry of actinide and lanthanide compounds. This is important to the DOE because the production of nuclear weapons at DOE facilities has left a serious legacy of environmental contamination, including millions of gallons of highly radioactive waste stored in hundreds of tanks that have exceeded their life expectancy. Much of the radioactive waste involves actinides, and their large atomic number implies that relativistic effects have important chemical consequences. By using modern non-relativistic quantum chemistry techniques, it is now possible to calculate to high accuracy the structures, energetics, and properties of molecules containing light elements. Our implementation of relativistic quantum chemical methods will, for the first time on massively parallel computers, provide capabilities for modeling heavy-element compounds similar to those currently available for light-element compounds. (author)

  5. IV. Health physics and chemistry

    Energy Technology Data Exchange (ETDEWEB)

    Garden, N.B.; Moyer, B.J.

    1948-05-24

    This report describes progress on the development of equipment and techniques to accomplish the goal of control and trapping of radioactive sustances. Emphasis is on simplicity reproducibiolity, and universal use. Also illustrated is the Health Chemistry Organization set-up of personnel.

  6. Public perception of chemistry

    OpenAIRE

    Stražar, Alenka

    2015-01-01

    The thesis deals with the perception of chemistry among the public, which reflects the stereotypes that people have about chemistry. It presents the existing classification of stereotypes about chemistry and their upgrade. An analysis of movies that reflect the existing perception of chemistry in the public is written. Literature on selected aspects of the application of chemistry in movies is collected and analyzed. A qualification of perception of chemistry in the movies is presented based ...

  7. Physical chemistry and the environment

    International Nuclear Information System (INIS)

    From the ozone hole and the greenhouse effect to plastics recycling and hazardous waste disposal, society faces a number of issues, the solutions to which require an unprecedented understanding of the properties of molecules. We are coming to realize that the environment is a coupled set of chemical systems, its dynamics determining the welfare of the biosphere and of humans in particular. These chemical systems are governed by fundamental molecular interactions, and they present chemists with an unparalleled challenge. The application of current concepts of molecular behavior and of up-to-date experimental and computational techniques can provide us with insights into the environment that are needed to mitigate past damage, to anticipate the impact of current human activity, and to avoid future insults to the environment. Environmental chemistry encompasses a number of separate, yet interlocking, areas of research. In all of these areas progress is limited by an inadequate understanding of the underlying chemical processes involved. Participation of all chemical approaches -- experimental, theoretical and computational -- and of all disciplines of chemistry -- organic, inorganic, physical, analytical and biochemistry -- will be required to provide the necessary fundamental understanding. The Symposium on ''Physical Chemistry and the Environment'' was designed to bring the many exciting and challenging physical chemistry problems involved in environmental chemistry to the attention of a larger segment of the physical chemistry community

  8. Eastside, Westside... An Exercise in Applying Document Analysis Techniques in Educational Evaluation. Research on Evaluation Program Paper and Report Series. No. 78. Interim Draft.

    Science.gov (United States)

    Garman, Keats

    This booklet is about document analysis and its utility as a method in education evaluation, and is intended for evaluators in local school districts, regional education agencies, and state departments of education. Document analysis is described as a technique that relies heavily upon a variety of written materials for data, insights, and…

  9. Ericksonian Approach to Experiential Education, Part 1: Developing the Stance of the Practitioner; Part 2: Tailoring Interventions; Part 3: Applying Specific Ericksonian Techniques.

    Science.gov (United States)

    Itin, Christian

    This three-part workshop presentation explores the ideas of Milton Erickson on the therapeutic relationship and the therapeutic use of metaphor, and applies these ideas to experiential education and adventure therapy. Part 1 introduces the practitioner to the core philosophy within an Ericksonian approach: "utilization" of a client's behavior and…

  10. Science Update: Inorganic Chemistry.

    Science.gov (United States)

    Rawls, Rebecca

    1981-01-01

    Describes areas of inorganic chemistry which have changed dramatically in the past year or two, including photochemistry, electrochemistry, organometallic complexes, inorganic reaction theory, and solid state chemistry. (DS)

  11. Using College Chemistry to Influence Creativity

    Science.gov (United States)

    Hill, Brenda W.

    1976-01-01

    After receiving creativity instruction in how to approach laboratory problems, a group of college chemistry students made significant improvements in both laboratory technique and creativity as shown on an instrument designed for this study. (MLH)

  12. Formulating and Solving Problems in Computational Chemistry.

    Science.gov (United States)

    Norris, A. C.

    1980-01-01

    Considered are the main elements of computational chemistry problems and how these elements can be used to formulate the problems mathematically. Techniques that are useful in devising an appropriate solution are also considered. (Author/TG)

  13. Analytical chemistry of nuclear materials

    International Nuclear Information System (INIS)

    The last two decades have witnessed an enormous development in chemical analysis. The rapid progress of nuclear energy, of solid-state physics and of other fields of modern industry has extended the concept of purity to limits previously unthought of, and to reach the new dimensions of these extreme demands, entirely new techniques have been invented and applied and old ones have been refined. Recognizing these facts, the International Atomic Energy Agency convened a Panel on Analytical Chemistry of Nuclear Materials to discuss the general problems facing the analytical chemist engaged in nuclear energy development, particularly in newly developing centre and countries, to analyse the represent situation and to advise as to the directions in which research and development appear to be most necessary. The Panel also discussed the analytical programme of the Agency's laboratory at Seibersdorf, where the Agency has already started a programme of international comparison of analytical methods which may lead to the establishment of international standards for many materials of interest. Refs and tabs

  14. Comparison of corrosion monitoring techniques in district heating systems

    DEFF Research Database (Denmark)

    Hilbert, Lisbeth Rischel; Nielsen, Lars Vendelbo; Thorarinsdottir, R.I.

    2004-01-01

    Investigations aimed at evaluating monitoring techniques as a function of the specific water chemistry has been conducted as a part of a Nordic project focused on improving the quality of corrosion monitoring in municipal district heating. A combination of techniques has been selected to measure...... both general and localised corrosion. Electrochemical techniques (LPR, EIS) as well as direct techniques (high sensitive ER, weight loss, local crevice corrosion current) have been applied. The data show that the water quality in Danish systems is high resulting in low corrosion rates, but changes...

  15. Applying the nominal group technique in an employment relations conflict situation: A case study of a university maintenance section in South Africa

    Directory of Open Access Journals (Sweden)

    Cornelis (Kees S. van der Waal

    2009-04-01

    Full Text Available After a breakdown in employment relations in the maintenance section of a higher education institution, the authors were asked to intervene in order to try and solve the employment relations conflict situation. It was decided to employ the Nominal Group Technique (NGT as a tool in problem identification during conflict in the workplace. An initial investigation of documentation and interviews with prominent individuals in the organisation was carried out. The NGT was then used in four focus group discussions to determine the important issues as seen by staff members. The NGT facilitates the determination of shared perceptions and the ranking of ideas. The NGT was used in diverse groups, necessitating adaptations to the technique. The perceived causes of the conflict were established. The NGT can be used in a conflict situation in the workplace in order to establish the perceived causes of employment relations conflict.

  16. A study on evaluating validity of SNR calculation using a conventional two region method in MR images applied a multichannel coil and parallel imaging technique

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Kwan Woo; Son, Soon Yong [Dept. of Radiology, Asan Medical Center, Seoul (Korea, Republic of); Min, Jung Whan [Dept. of Radiological Technology, Shingu University, Sungnam (Korea, Republic of); Kwon, Kyung Tae [Dept. of Radiological Technology, Dongnam Health University, Suwon (Korea, Republic of); Yoo, Beong Gyu; Lee, Jong Seok [Dept. of Radiotechnology, Wonkwang Health Science University, Iksan (Korea, Republic of)

    2015-12-15

    The purpose of this study was to investigate the problems of a signal to noise ratio measurement using a two region measurement method that is conventionally used when using a multi-channel coil and a parallel imaging technique. As a research method, after calculating the standard SNR using a single channel head coil of which coil satisfies three preconditions when using a two region measurement method, we made comparisons and evaluations after calculating an SNR by using a two region measurement method of which method is problematic because it is used without considering the methods recommended by reputable organizations and the preconditions at the time of using a multi-channel coil and a parallel imaging technique. We found that a two region measurement method using a multi-channel coil and a parallel imaging technique shows the highest relative standard deviation, and thus shows a low degree of precision. In addition, we found out that the difference of SNR according to ROI location was very high, and thus a spatial noise distribution was not uniform. Also, 95% confidence interval through Blend-Altman plot is the widest, and thus the conformity degree with a two region measurement method using the standard single channel head coil is low. By directly comparing an AAPM method, which serves as a standard of a performance evaluation test of a magnetic resonance imaging device under the same image acquisition conditions, an NEMA method which can accurately determine the noise level in a signal region and the methods recommended by manufacturers of a magnetic resonance imaging device, there is a significance in that we quantitatively verified the inaccurate problems of a signal to noise ratio using a two region measurement method when using a multi-channel coil and a parallel imaging technique of which method does not satisfy the preconditions that researchers could overlook.

  17. Measurements and searches with matrix element techniques in W+jets signatures - International Union of Pure and Applied Physics (IUPAP) Awards talk

    Energy Technology Data Exchange (ETDEWEB)

    Canelli, Florencia [University of Chicago, Fermi National Accelerator Laboratory - Fermilab, P.O. Box 500, Batavia, IL 60510-5011 (United States)

    2010-07-01

    The matrix element technique developed over the last decade has improved precision measurements and also helped establish new processes. This is in great part possible due to the availability of CPU and to the improved modeling of the Monte Carlo tools. W+jets physics has given strong SM foundation for beyond SM: Top quark mass measurements; Top quark coupling probes; Single top observation; di-boson w/jets observation; Higgs searches; Heavy quark searches

  18. Alteration Information Extraction by Applying Synthesis Processing Techniques to Landsat ETM+Data: Case Study of Zhaoyuan Gold Mines,Shandong Province, China

    Institute of Scientific and Technical Information of China (English)

    Liu Fujiang; Wu Xincai; Sun Huashan; Guo Yan

    2007-01-01

    Satellite remote sensing data are usually used to analyze the spatial distribution pattern of geological structures and generally serve as a significant means for the identification of alteration zones. Based on the Landsat Enhanced Thematic Mapper (ETM+) data, which have better spectral resolution (8 bands) and spatial resolution (15 m in PAN band), the synthesis processing techniques were presented to fulfill alteration information extraction: data preparation, vegetation indices and band ratios, and expert classifier-based classification. These techniques have been implemented in the MapGIS-RSP software (version 1.0), developed by the Wuhan Zondy Cyber Technology Co., Ltd,China. In the study area application of extracting alteration information in the Zhaoyuan (招远) gold mines, Shandong (山东) Province, China, several hydorthermally altered zones (included two new sites) were found after satellite imagery interpretation coupled with field surveys. It is concluded that these synthesis processing techniques are useful approaches and are applicable to a wide range of gold-mineralized alteration information extraction.

  19. Research on Innovating, Applying Multiple Paths Routing Technique Based on Fuzzy Logic and Genetic Algorithm for Routing Messages in Service - Oriented Routing

    Directory of Open Access Journals (Sweden)

    Nguyen Thanh Long

    2015-02-01

    Full Text Available MANET (short for Mobile Ad-Hoc Network consists of a set of mobile network nodes, network configuration changes very fast. In content based routing, data is transferred from source node to request nodes is not based on destination addresses. Therefore, it is very flexible and reliable, because source node does not need to know destination nodes. If We can find multiple paths that satisfies bandwidth requirement, split the original message into multiple smaller messages to transmit concurrently on these paths. On destination nodes, combine separated messages into the original message. Hence it can utilize better network resources, causes data transfer rate to be higher, load balancing, failover. Service Oriented Routing is inherited from the model of content based routing (CBR, combined with several advanced techniques such as Multicast, multiple path routing, Genetic algorithm to increase the data rate, and data encryption to ensure information security. Fuzzy logic is a logical field study evaluating the accuracy of the results based on the approximation of the components involved, make decisions based on many factors relative accuracy based on experimental or mathematical proof. This article presents some techniques to support multiple path routing from one network node to a set of nodes with guaranteed quality of service. By using these techniques can decrease the network load, congestion, use network resources efficiently.

  20. Four examples of modern NDE techniques applied to the investigation of nuclear and non-nuclear concrete structures and a vision of future improvements

    International Nuclear Information System (INIS)

    Existing techniques for non-destructive testing include acoustic and ultrasonic methods, high energy radiography, radar and inductive methods. Successful application of these methods to real structures requires sensible combinations of methods together with an understanding of the engineering problem, the behaviour of the concrete and of destructive methods of sampling and analysis. As there is a real danger in over-simplifying the problem and in assuming damage-types which are based on accepted classical damage patterns and symptoms, NDE in civil engineering will always require for this reason a careful analysis by specialists despite improvements in test methodology, data collection and data processing. This paper presents four examples of structural investigations using modern NDE techniques, with a summary of the problem description and the performance of the techniques: leakage of a nuclear containment, cracking of an industrial foundation, honeycombing stretching across a bridge structure, and locating reinforcement in concrete elements in a nuclear structure (through high frequency radar and high energy radiography)